2399 files changed, 87480 insertions, 69418 deletions

diff --git a/arch/Kconfig b/arch/Kconfig
index 1feb169..af2cc6e 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -286,9 +286,6 @@ config HAVE_PERF_USER_STACK_DUMP
 config HAVE_ARCH_JUMP_LABEL
 	bool
 
-config HAVE_ARCH_MUTEX_CPU_RELAX
-	bool
-
 config HAVE_RCU_TABLE_FREE
 	bool
 
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 082d9b4..35a300d 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -7,7 +7,6 @@ config ALPHA
 	select HAVE_PCSPKR_PLATFORM
 	select HAVE_PERF_EVENTS
 	select HAVE_DMA_ATTRS
-	select HAVE_GENERIC_HARDIRQS
 	select VIRT_TO_BUS
 	select GENERIC_IRQ_PROBE
 	select AUTO_IRQ_AFFINITY if SMP
diff --git a/arch/alpha/lib/csum_partial_copy.c b/arch/alpha/lib/csum_partial_copy.c
index 40736da..ffb19b7 100644
--- a/arch/alpha/lib/csum_partial_copy.c
+++ b/arch/alpha/lib/csum_partial_copy.c
@@ -338,6 +338,11 @@ csum_partial_copy_from_user(const void __user *src, void *dst, int len,
 	unsigned long doff = 7 & (unsigned long) dst;
 
 	if (len) {
+		if (!access_ok(VERIFY_READ, src, len)) {
+			*errp = -EFAULT;
+			memset(dst, 0, len);
+			return sum;
+		}
 		if (!doff) {
 			if (!soff)
 				checksum = csum_partial_cfu_aligned(
diff --git a/arch/alpha/mm/fault.c b/arch/alpha/mm/fault.c
index 0c4132d..98838a0 100644
--- a/arch/alpha/mm/fault.c
+++ b/arch/alpha/mm/fault.c
@@ -89,8 +89,7 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 	const struct exception_table_entry *fixup;
 	int fault, si_code = SEGV_MAPERR;
 	siginfo_t info;
-	unsigned int flags = (FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
-			      (cause > 0 ? FAULT_FLAG_WRITE : 0));
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
 
 	/* As of EV6, a load into $31/$f31 is a prefetch, and never faults
 	   (or is suppressed by the PALcode).  Support that for older CPUs
@@ -115,7 +114,8 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 	if (address >= TASK_SIZE)
 		goto vmalloc_fault;
 #endif
-
+	if (user_mode(regs))
+		flags |= FAULT_FLAG_USER;
 retry:
 	down_read(&mm->mmap_sem);
 	vma = find_vma(mm, address);
@@ -142,6 +142,7 @@ retry:
 	} else {
 		if (!(vma->vm_flags & VM_WRITE))
 			goto bad_area;
+		flags |= FAULT_FLAG_WRITE;
 	}
 
 	/* If for any reason at all we couldn't handle the fault,
diff --git a/arch/alpha/oprofile/common.c b/arch/alpha/oprofile/common.c
index b8ce18f..310a4ce 100644
--- a/arch/alpha/oprofile/common.c
+++ b/arch/alpha/oprofile/common.c
@@ -106,7 +106,7 @@ op_axp_stop(void)
 }
 
 static int
-op_axp_create_files(struct super_block *sb, struct dentry *root)
+op_axp_create_files(struct dentry *root)
 {
 	int i;
 
@@ -115,23 +115,23 @@ op_axp_create_files(struct super_block *sb, struct dentry *root)
 		char buf[4];
 
 		snprintf(buf, sizeof buf, "%d", i);
-		dir = oprofilefs_mkdir(sb, root, buf);
+		dir = oprofilefs_mkdir(root, buf);
 
-		oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
-                oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
-		oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
+		oprofilefs_create_ulong(dir, "enabled", &ctr[i].enabled);
+                oprofilefs_create_ulong(dir, "event", &ctr[i].event);
+		oprofilefs_create_ulong(dir, "count", &ctr[i].count);
 		/* Dummies.  */
-		oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
-		oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
-		oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
+		oprofilefs_create_ulong(dir, "kernel", &ctr[i].kernel);
+		oprofilefs_create_ulong(dir, "user", &ctr[i].user);
+		oprofilefs_create_ulong(dir, "unit_mask", &ctr[i].unit_mask);
 	}
 
 	if (model->can_set_proc_mode) {
-		oprofilefs_create_ulong(sb, root, "enable_pal",
+		oprofilefs_create_ulong(root, "enable_pal",
 					&sys.enable_pal);
-		oprofilefs_create_ulong(sb, root, "enable_kernel",
+		oprofilefs_create_ulong(root, "enable_kernel",
 					&sys.enable_kernel);
-		oprofilefs_create_ulong(sb, root, "enable_user",
+		oprofilefs_create_ulong(root, "enable_user",
 					&sys.enable_user);
 	}
 
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 68fcbb2..91dbb27 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -20,7 +20,6 @@ config ARC
 	select GENERIC_SMP_IDLE_THREAD
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
-	select HAVE_GENERIC_HARDIRQS
 	select HAVE_IOREMAP_PROT
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
diff --git a/arch/arc/boot/.gitignore b/arch/arc/boot/.gitignore
new file mode 100644
index 0000000..5d65b54
--- /dev/null
+++ b/arch/arc/boot/.gitignore
@@ -0,0 +1 @@
+*.dtb*
diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h
index 5802849..e4abdaa 100644
--- a/arch/arc/include/asm/cache.h
+++ b/arch/arc/include/asm/cache.h
@@ -57,7 +57,7 @@
 
 extern void arc_cache_init(void);
 extern char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len);
-extern void __init read_decode_cache_bcr(void);
+extern void read_decode_cache_bcr(void);
 
 #endif	/* !__ASSEMBLY__ */
 
diff --git a/arch/arc/include/asm/delay.h b/arch/arc/include/asm/delay.h
index 442ce5d..43de302 100644
--- a/arch/arc/include/asm/delay.h
+++ b/arch/arc/include/asm/delay.h
@@ -53,11 +53,10 @@ static inline void __udelay(unsigned long usecs)
 {
 	unsigned long loops;
 
-	/* (long long) cast ensures 64 bit MPY - real or emulated
+	/* (u64) cast ensures 64 bit MPY - real or emulated
 	 * HZ * 4295 is pre-evaluated by gcc - hence only 2 mpy ops
 	 */
-	loops = ((long long)(usecs * 4295 * HZ) *
-		 (long long)(loops_per_jiffy)) >> 32;
+	loops = ((u64) usecs * 4295 * HZ * loops_per_jiffy) >> 32;
 
 	__delay(loops);
 }
diff --git a/arch/arc/include/asm/entry.h b/arch/arc/include/asm/entry.h
index df57611..8840810 100644
--- a/arch/arc/include/asm/entry.h
+++ b/arch/arc/include/asm/entry.h
@@ -365,7 +365,7 @@
  * it to memory (non-SMP case) or SCRATCH0 Aux Reg (SMP).
  *
  * Before saving the full regfile - this reg is restored back, only
- * to be saved again on kernel mode stack, as part of ptregs.
+ * to be saved again on kernel mode stack, as part of pt_regs.
  *-------------------------------------------------------------*/
 .macro EXCPN_PROLOG_FREEUP_REG	reg
 #ifdef CONFIG_SMP
@@ -384,6 +384,28 @@
 .endm
 
 /*--------------------------------------------------------------
+ * Exception Entry prologue
+ * -Switches stack to K mode (if not already)
+ * -Saves the register file
+ *
+ * After this it is safe to call the "C" handlers
+ *-------------------------------------------------------------*/
+.macro EXCEPTION_PROLOGUE
+
+	/* Need at least 1 reg to code the early exception prologue */
+	EXCPN_PROLOG_FREEUP_REG r9
+
+	/* U/K mode at time of exception (stack not switched if already K) */
+	lr  r9, [erstatus]
+
+	/* ARC700 doesn't provide auto-stack switching */
+	SWITCH_TO_KERNEL_STK
+
+	/* save the regfile */
+	SAVE_ALL_SYS
+.endm
+
+/*--------------------------------------------------------------
  * Save all registers used by Exceptions (TLB Miss, Prot-V, Mem err etc)
  * Requires SP to be already switched to kernel mode Stack
  * sp points to the next free element on the stack at exit of this macro.
diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h
index 473424d..334ce70 100644
--- a/arch/arc/include/asm/io.h
+++ b/arch/arc/include/asm/io.h
@@ -100,6 +100,10 @@ static inline void __raw_writel(u32 w, volatile void __iomem *addr)
 
 }
 
+#define readb_relaxed readb
+#define readw_relaxed readw
+#define readl_relaxed readl
+
 #include <asm-generic/io.h>
 
 #endif /* _ASM_ARC_IO_H */
diff --git a/arch/arc/include/asm/irqflags.h b/arch/arc/include/asm/irqflags.h
index d99f79b..b68b53f 100644
--- a/arch/arc/include/asm/irqflags.h
+++ b/arch/arc/include/asm/irqflags.h
@@ -157,13 +157,6 @@ static inline void arch_unmask_irq(unsigned int irq)
 	flag	\scratch
 .endm
 
-.macro IRQ_DISABLE_SAVE  scratch, save
-	lr	\scratch, [status32]
-	mov	\save, \scratch		/* Make a copy */
-	bic	\scratch, \scratch, (STATUS_E1_MASK | STATUS_E2_MASK)
-	flag	\scratch
-.endm
-
 .macro IRQ_ENABLE  scratch
 	lr	\scratch, [status32]
 	or	\scratch, \scratch, (STATUS_E1_MASK | STATUS_E2_MASK)
diff --git a/arch/arc/include/asm/mmu.h b/arch/arc/include/asm/mmu.h
index 7c03fe6..c2663b3 100644
--- a/arch/arc/include/asm/mmu.h
+++ b/arch/arc/include/asm/mmu.h
@@ -32,6 +32,8 @@
 /* Error code if probe fails */
 #define TLB_LKUP_ERR		0x80000000
 
+#define TLB_DUP_ERR	(TLB_LKUP_ERR | 0x00000001)
+
 /* TLB Commands */
 #define TLBWrite    0x1
 #define TLBRead     0x2
@@ -46,21 +48,18 @@
 #ifndef __ASSEMBLY__
 
 typedef struct {
-	unsigned long asid;	/* Pvt Addr-Space ID for mm */
-#ifdef CONFIG_ARC_TLB_DBG
-	struct task_struct *tsk;
-#endif
+	unsigned long asid;	/* 8 bit MMU PID + Generation cycle */
 } mm_context_t;
 
 #ifdef CONFIG_ARC_DBG_TLB_PARANOIA
-void tlb_paranoid_check(unsigned int pid_sw, unsigned long address);
+void tlb_paranoid_check(unsigned int mm_asid, unsigned long address);
 #else
 #define tlb_paranoid_check(a, b)
 #endif
 
 void arc_mmu_init(void);
 extern char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len);
-void __init read_decode_mmu_bcr(void);
+void read_decode_mmu_bcr(void);
 
 #endif	/* !__ASSEMBLY__ */
 
diff --git a/arch/arc/include/asm/mmu_context.h b/arch/arc/include/asm/mmu_context.h
index 0d71fb1..43a1b51 100644
--- a/arch/arc/include/asm/mmu_context.h
+++ b/arch/arc/include/asm/mmu_context.h
@@ -34,95 +34,65 @@
  * When it reaches max 255, the allocation cycle starts afresh by flushing
  * the entire TLB and wrapping ASID back to zero.
  *
- * For book-keeping, Linux uses a couple of data-structures:
- *  -mm_struct has an @asid field to keep a note of task's ASID (needed at the
- *   time of say switch_mm( )
- *  -An array of mm structs @asid_mm_map[] for asid->mm the reverse mapping,
- *  given an ASID, finding the mm struct associated.
- *
- * The round-robin allocation algorithm allows for ASID stealing.
- * If asid tracker is at "x-1", a new req will allocate "x", even if "x" was
- * already assigned to another (switched-out) task. Obviously the prev owner
- * is marked with an invalid ASID to make it request for a new ASID when it
- * gets scheduled next time. However its TLB entries (with ASID "x") could
- * exist, which must be cleared before the same ASID is used by the new owner.
- * Flushing them would be plausible but costly solution. Instead we force a
- * allocation policy quirk, which ensures that a stolen ASID won't have any
- * TLB entries associates, alleviating the need to flush.
- * The quirk essentially is not allowing ASID allocated in prev cycle
- * to be used past a roll-over in the next cycle.
- * When this happens (i.e. task ASID > asid tracker), task needs to refresh
- * its ASID, aligning it to current value of tracker. If the task doesn't get
- * scheduled past a roll-over, hence its ASID is not yet realigned with
- * tracker, such ASID is anyways safely reusable because it is
- * gauranteed that TLB entries with that ASID wont exist.
+ * A new allocation cycle, post rollover, could potentially reassign an ASID
+ * to a different task. Thus the rule is to refresh the ASID in a new cycle.
+ * The 32 bit @asid_cache (and mm->asid) have 8 bits MMU PID and rest 24 bits
+ * serve as cycle/generation indicator and natural 32 bit unsigned math
+ * automagically increments the generation when lower 8 bits rollover.
  */
 
-#define FIRST_ASID  0
-#define MAX_ASID    255			/* 8 bit PID field in PID Aux reg */
-#define NO_ASID     (MAX_ASID + 1)	/* ASID Not alloc to mmu ctxt */
-#define NUM_ASID    ((MAX_ASID - FIRST_ASID) + 1)
+#define MM_CTXT_ASID_MASK	0x000000ff /* MMU PID reg :8 bit PID */
+#define MM_CTXT_CYCLE_MASK	(~MM_CTXT_ASID_MASK)
+
+#define MM_CTXT_FIRST_CYCLE	(MM_CTXT_ASID_MASK + 1)
+#define MM_CTXT_NO_ASID		0UL
 
-/* ASID to mm struct mapping */
-extern struct mm_struct *asid_mm_map[NUM_ASID + 1];
+#define hw_pid(mm)		(mm->context.asid & MM_CTXT_ASID_MASK)
 
-extern int asid_cache;
+extern unsigned int asid_cache;
 
 /*
- * Assign a new ASID to task. If the task already has an ASID, it is
- * relinquished.
+ * Get a new ASID if task doesn't have a valid one (unalloc or from prev cycle)
+ * Also set the MMU PID register to existing/updated ASID
  */
 static inline void get_new_mmu_context(struct mm_struct *mm)
 {
-	struct mm_struct *prev_owner;
 	unsigned long flags;
 
 	local_irq_save(flags);
 
 	/*
-	 * Relinquish the currently owned ASID (if any).
-	 * Doing unconditionally saves a cmp-n-branch; for already unused
-	 * ASID slot, the value was/remains NULL
+	 * Move to new ASID if it was not from current alloc-cycle/generation.
+	 * This is done by ensuring that the generation bits in both mm->ASID
+	 * and cpu's ASID counter are exactly same.
+	 *
+	 * Note: Callers needing new ASID unconditionally, independent of
+	 * 	 generation, e.g. local_flush_tlb_mm() for forking  parent,
+	 * 	 first need to destroy the context, setting it to invalid
+	 * 	 value.
 	 */
-	asid_mm_map[mm->context.asid] = (struct mm_struct *)NULL;
+	if (!((mm->context.asid ^ asid_cache) & MM_CTXT_CYCLE_MASK))
+		goto set_hw;
+
+	/* move to new ASID and handle rollover */
+	if (unlikely(!(++asid_cache & MM_CTXT_ASID_MASK))) {
 
-	/* move to new ASID */
-	if (++asid_cache > MAX_ASID) {	/* ASID roll-over */
-		asid_cache = FIRST_ASID;
 		flush_tlb_all();
-	}
 
-	/*
-	 * Is next ASID already owned by some-one else (we are stealing it).
-	 * If so, let the orig owner be aware of this, so when it runs, it
-	 * asks for a brand new ASID. This would only happen for a long-lived
-	 * task with ASID from prev allocation cycle (before ASID roll-over).
-	 *
-	 * This might look wrong - if we are re-using some other task's ASID,
-	 * won't we use it's stale TLB entries too. Actually switch_mm( ) takes
-	 * care of such a case: it ensures that task with ASID from prev alloc
-	 * cycle, when scheduled will refresh it's ASID: see switch_mm( ) below
-	 * The stealing scenario described here will only happen if that task
-	 * didn't get a chance to refresh it's ASID - implying stale entries
-	 * won't exist.
-	 */
-	prev_owner = asid_mm_map[asid_cache];
-	if (prev_owner)
-		prev_owner->context.asid = NO_ASID;
+		/*
+		 * Above checke for rollover of 8 bit ASID in 32 bit container.
+		 * If the container itself wrapped around, set it to a non zero
+		 * "generation" to distinguish from no context
+		 */
+		if (!asid_cache)
+			asid_cache = MM_CTXT_FIRST_CYCLE;
+	}
 
 	/* Assign new ASID to tsk */
-	asid_mm_map[asid_cache] = mm;
 	mm->context.asid = asid_cache;
 
-#ifdef CONFIG_ARC_TLB_DBG
-	pr_info("ARC_TLB_DBG: NewMM=0x%x OldMM=0x%x task_struct=0x%x Task: %s,"
-	       " pid:%u, assigned asid:%lu\n",
-	       (unsigned int)mm, (unsigned int)prev_owner,
-	       (unsigned int)(mm->context.tsk), (mm->context.tsk)->comm,
-	       (mm->context.tsk)->pid, mm->context.asid);
-#endif
-
-	write_aux_reg(ARC_REG_PID, asid_cache | MMU_ENABLE);
+set_hw:
+	write_aux_reg(ARC_REG_PID, hw_pid(mm) | MMU_ENABLE);
 
 	local_irq_restore(flags);
 }
@@ -134,10 +104,7 @@ static inline void get_new_mmu_context(struct mm_struct *mm)
 static inline int
 init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 {
-	mm->context.asid = NO_ASID;
-#ifdef CONFIG_ARC_TLB_DBG
-	mm->context.tsk = tsk;
-#endif
+	mm->context.asid = MM_CTXT_NO_ASID;
 	return 0;
 }
 
@@ -152,40 +119,21 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	write_aux_reg(ARC_REG_SCRATCH_DATA0, next->pgd);
 #endif
 
-	/*
-	 * Get a new ASID if task doesn't have a valid one. Possible when
-	 *  -task never had an ASID (fresh after fork)
-	 *  -it's ASID was stolen - past an ASID roll-over.
-	 *  -There's a third obscure scenario (if this task is running for the
-	 *   first time afer an ASID rollover), where despite having a valid
-	 *   ASID, we force a get for new ASID - see comments at top.
-	 *
-	 * Both the non-alloc scenario and first-use-after-rollover can be
-	 * detected using the single condition below:  NO_ASID = 256
-	 * while asid_cache is always a valid ASID value (0-255).
-	 */
-	if (next->context.asid > asid_cache) {
-		get_new_mmu_context(next);
-	} else {
-		/*
-		 * XXX: This will never happen given the chks above
-		 * BUG_ON(next->context.asid > MAX_ASID);
-		 */
-		write_aux_reg(ARC_REG_PID, next->context.asid | MMU_ENABLE);
-	}
-
+	get_new_mmu_context(next);
 }
 
+/*
+ * Called at the time of execve() to get a new ASID
+ * Note the subtlety here: get_new_mmu_context() behaves differently here
+ * vs. in switch_mm(). Here it always returns a new ASID, because mm has
+ * an unallocated "initial" value, while in latter, it moves to a new ASID,
+ * only if it was unallocated
+ */
+#define activate_mm(prev, next)		switch_mm(prev, next, NULL)
+
 static inline void destroy_context(struct mm_struct *mm)
 {
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	asid_mm_map[mm->context.asid] = NULL;
-	mm->context.asid = NO_ASID;
-
-	local_irq_restore(flags);
+	mm->context.asid = MM_CTXT_NO_ASID;
 }
 
 /* it seemed that deactivate_mm( ) is a reasonable place to do book-keeping
@@ -197,17 +145,6 @@ static inline void destroy_context(struct mm_struct *mm)
  */
 #define deactivate_mm(tsk, mm)   do { } while (0)
 
-static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next)
-{
-#ifndef CONFIG_SMP
-	write_aux_reg(ARC_REG_SCRATCH_DATA0, next->pgd);
-#endif
-
-	/* Unconditionally get a new ASID */
-	get_new_mmu_context(next);
-
-}
-
 #define enter_lazy_tlb(mm, tsk)
 
 #endif /* __ASM_ARC_MMU_CONTEXT_H */
diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h
index 4749a0e..6b0b7f7e 100644
--- a/arch/arc/include/asm/pgtable.h
+++ b/arch/arc/include/asm/pgtable.h
@@ -57,43 +57,31 @@
 
 #define _PAGE_ACCESSED      (1<<1)	/* Page is accessed (S) */
 #define _PAGE_CACHEABLE     (1<<2)	/* Page is cached (H) */
-#define _PAGE_U_EXECUTE     (1<<3)	/* Page has user execute perm (H) */
-#define _PAGE_U_WRITE       (1<<4)	/* Page has user write perm (H) */
-#define _PAGE_U_READ        (1<<5)	/* Page has user read perm (H) */
-#define _PAGE_K_EXECUTE     (1<<6)	/* Page has kernel execute perm (H) */
-#define _PAGE_K_WRITE       (1<<7)	/* Page has kernel write perm (H) */
-#define _PAGE_K_READ        (1<<8)	/* Page has kernel perm (H) */
-#define _PAGE_GLOBAL        (1<<9)	/* Page is global (H) */
-#define _PAGE_MODIFIED      (1<<10)	/* Page modified (dirty) (S) */
-#define _PAGE_FILE          (1<<10)	/* page cache/ swap (S) */
-#define _PAGE_PRESENT       (1<<11)	/* TLB entry is valid (H) */
+#define _PAGE_EXECUTE       (1<<3)	/* Page has user execute perm (H) */
+#define _PAGE_WRITE         (1<<4)	/* Page has user write perm (H) */
+#define _PAGE_READ          (1<<5)	/* Page has user read perm (H) */
+#define _PAGE_MODIFIED      (1<<6)	/* Page modified (dirty) (S) */
+#define _PAGE_FILE          (1<<7)	/* page cache/ swap (S) */
+#define _PAGE_GLOBAL        (1<<8)	/* Page is global (H) */
+#define _PAGE_PRESENT       (1<<10)	/* TLB entry is valid (H) */
 
-#else
+#else	/* MMU v3 onwards */
 
-/* PD1 */
 #define _PAGE_CACHEABLE     (1<<0)	/* Page is cached (H) */
-#define _PAGE_U_EXECUTE     (1<<1)	/* Page has user execute perm (H) */
-#define _PAGE_U_WRITE       (1<<2)	/* Page has user write perm (H) */
-#define _PAGE_U_READ        (1<<3)	/* Page has user read perm (H) */
-#define _PAGE_K_EXECUTE     (1<<4)	/* Page has kernel execute perm (H) */
-#define _PAGE_K_WRITE       (1<<5)	/* Page has kernel write perm (H) */
-#define _PAGE_K_READ        (1<<6)	/* Page has kernel perm (H) */
-#define _PAGE_ACCESSED      (1<<7)	/* Page is accessed (S) */
-
-/* PD0 */
+#define _PAGE_EXECUTE       (1<<1)	/* Page has user execute perm (H) */
+#define _PAGE_WRITE         (1<<2)	/* Page has user write perm (H) */
+#define _PAGE_READ          (1<<3)	/* Page has user read perm (H) */
+#define _PAGE_ACCESSED      (1<<4)	/* Page is accessed (S) */
+#define _PAGE_MODIFIED      (1<<5)	/* Page modified (dirty) (S) */
+#define _PAGE_FILE          (1<<6)	/* page cache/ swap (S) */
 #define _PAGE_GLOBAL        (1<<8)	/* Page is global (H) */
 #define _PAGE_PRESENT       (1<<9)	/* TLB entry is valid (H) */
-#define _PAGE_SHARED_CODE   (1<<10)	/* Shared Code page with cmn vaddr
+#define _PAGE_SHARED_CODE   (1<<11)	/* Shared Code page with cmn vaddr
 					   usable for shared TLB entries (H) */
-
-#define _PAGE_MODIFIED      (1<<11)	/* Page modified (dirty) (S) */
-#define _PAGE_FILE          (1<<12)	/* page cache/ swap (S) */
-
-#define _PAGE_SHARED_CODE_H (1<<31)	/* Hardware counterpart of above */
 #endif
 
-/* Kernel allowed all permissions for all pages */
-#define _K_PAGE_PERMS  (_PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ | \
+/* vmalloc permissions */
+#define _K_PAGE_PERMS  (_PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ | \
 			_PAGE_GLOBAL | _PAGE_PRESENT)
 
 #ifdef CONFIG_ARC_CACHE_PAGES
@@ -109,10 +97,6 @@
  */
 #define ___DEF (_PAGE_PRESENT | _PAGE_DEF_CACHEABLE)
 
-#define _PAGE_READ	(_PAGE_U_READ    | _PAGE_K_READ)
-#define _PAGE_WRITE	(_PAGE_U_WRITE   | _PAGE_K_WRITE)
-#define _PAGE_EXECUTE	(_PAGE_U_EXECUTE | _PAGE_K_EXECUTE)
-
 /* Set of bits not changed in pte_modify */
 #define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED)
 
@@ -126,8 +110,8 @@
 
 #define PAGE_SHARED	PAGE_U_W_R
 
-/* While kernel runs out of unstrslated space, vmalloc/modules use a chunk of
- * kernel vaddr space - visible in all addr spaces, but kernel mode only
+/* While kernel runs out of unstranslated space, vmalloc/modules use a chunk of
+ * user vaddr space - visible in all addr spaces, but kernel mode only
  * Thus Global, all-kernel-access, no-user-access, cached
  */
 #define PAGE_KERNEL          __pgprot(_K_PAGE_PERMS | _PAGE_DEF_CACHEABLE)
@@ -136,10 +120,9 @@
 #define PAGE_KERNEL_NO_CACHE __pgprot(_K_PAGE_PERMS)
 
 /* Masks for actual TLB "PD"s */
-#define PTE_BITS_IN_PD0	(_PAGE_GLOBAL | _PAGE_PRESENT)
-#define PTE_BITS_IN_PD1	(PAGE_MASK | _PAGE_CACHEABLE | \
-			 _PAGE_U_EXECUTE | _PAGE_U_WRITE | _PAGE_U_READ | \
-			 _PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ)
+#define PTE_BITS_IN_PD0		(_PAGE_GLOBAL | _PAGE_PRESENT)
+#define PTE_BITS_RWX		(_PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ)
+#define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK | _PAGE_CACHEABLE)
 
 /**************************************************************************
  * Mapping of vm_flags (Generic VM) to PTE flags (arch specific)
diff --git a/arch/arc/include/asm/ptrace.h b/arch/arc/include/asm/ptrace.h
index c9938e7..1bfeec2 100644
--- a/arch/arc/include/asm/ptrace.h
+++ b/arch/arc/include/asm/ptrace.h
@@ -20,27 +20,17 @@ struct pt_regs {
 
 	/* Real registers */
 	long bta;	/* bta_l1, bta_l2, erbta */
-	long lp_start;
-	long lp_end;
-	long lp_count;
+
+	long lp_start, lp_end, lp_count;
+
 	long status32;	/* status32_l1, status32_l2, erstatus */
 	long ret;	/* ilink1, ilink2 or eret */
 	long blink;
 	long fp;
 	long r26;	/* gp */
-	long r12;
-	long r11;
-	long r10;
-	long r9;
-	long r8;
-	long r7;
-	long r6;
-	long r5;
-	long r4;
-	long r3;
-	long r2;
-	long r1;
-	long r0;
+
+	long r12, r11, r10, r9, r8, r7, r6, r5, r4, r3, r2, r1, r0;
+
 	long sp;	/* user/kernel sp depending on where we came from  */
 	long orig_r0;
 
@@ -70,19 +60,7 @@ struct pt_regs {
 /* Callee saved registers - need to be saved only when you are scheduled out */
 
 struct callee_regs {
-	long r25;
-	long r24;
-	long r23;
-	long r22;
-	long r21;
-	long r20;
-	long r19;
-	long r18;
-	long r17;
-	long r16;
-	long r15;
-	long r14;
-	long r13;
+	long r25, r24, r23, r22, r21, r20, r19, r18, r17, r16, r15, r14, r13;
 };
 
 #define instruction_pointer(regs)	((regs)->ret)
diff --git a/arch/arc/include/asm/sections.h b/arch/arc/include/asm/sections.h
index 6fc1159..764f1e3 100644
--- a/arch/arc/include/asm/sections.h
+++ b/arch/arc/include/asm/sections.h
@@ -11,7 +11,6 @@
 
 #include <asm-generic/sections.h>
 
-extern char _int_vec_base_lds[];
 extern char __arc_dccm_base[];
 extern char __dtb_start[];
 
diff --git a/arch/arc/include/asm/spinlock.h b/arch/arc/include/asm/spinlock.h
index f158197..b6a8c2d 100644
--- a/arch/arc/include/asm/spinlock.h
+++ b/arch/arc/include/asm/spinlock.h
@@ -45,7 +45,14 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock)
 
 static inline void arch_spin_unlock(arch_spinlock_t *lock)
 {
-	lock->slock = __ARCH_SPIN_LOCK_UNLOCKED__;
+	unsigned int tmp = __ARCH_SPIN_LOCK_UNLOCKED__;
+
+	__asm__ __volatile__(
+	"	ex  %0, [%1]		\n"
+	: "+r" (tmp)
+	: "r"(&(lock->slock))
+	: "memory");
+
 	smp_mb();
 }
 
diff --git a/arch/arc/include/asm/spinlock_types.h b/arch/arc/include/asm/spinlock_types.h
index 8276bfd..662627c 100644
--- a/arch/arc/include/asm/spinlock_types.h
+++ b/arch/arc/include/asm/spinlock_types.h
@@ -20,9 +20,9 @@ typedef struct {
 #define __ARCH_SPIN_LOCK_LOCKED		{ __ARCH_SPIN_LOCK_LOCKED__ }
 
 /*
- * Unlocked:     0x01_00_00_00
- * Read lock(s): 0x00_FF_00_00 to say 0x01
- * Write lock:   0x0, but only possible if prior value "unlocked" 0x0100_0000
+ * Unlocked     : 0x0100_0000
+ * Read lock(s) : 0x00FF_FFFF to 0x01  (Multiple Readers decrement it)
+ * Write lock   : 0x0, but only if prior value is "unlocked" 0x0100_0000
  */
 typedef struct {
 	volatile unsigned int	counter;
diff --git a/arch/arc/include/asm/uaccess.h b/arch/arc/include/asm/uaccess.h
index 3242082..30c9baf 100644
--- a/arch/arc/include/asm/uaccess.h
+++ b/arch/arc/include/asm/uaccess.h
@@ -43,7 +43,7 @@
  * Because it essentially checks if buffer end is within limit and @len is
  * non-ngeative, which implies that buffer start will be within limit too.
  *
- * The reason for rewriting being, for majorit yof cases, @len is generally
+ * The reason for rewriting being, for majority of cases, @len is generally
  * compile time constant, causing first sub-expression to be compile time
  * subsumed.
  *
@@ -53,7 +53,7 @@
  *
  */
 #define __user_ok(addr, sz)	(((sz) <= TASK_SIZE) && \
-				 (((addr)+(sz)) <= get_fs()))
+				 ((addr) <= (get_fs() - (sz))))
 #define __access_ok(addr, sz)	(unlikely(__kernel_ok) || \
 				 likely(__user_ok((addr), (sz))))
 
diff --git a/arch/arc/kernel/.gitignore b/arch/arc/kernel/.gitignore
new file mode 100644
index 0000000..c5f676c
--- /dev/null
+++ b/arch/arc/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/arch/arc/kernel/devtree.c b/arch/arc/kernel/devtree.c
index bdee3a8..2340af0 100644
--- a/arch/arc/kernel/devtree.c
+++ b/arch/arc/kernel/devtree.c
@@ -18,12 +18,6 @@
 #include <asm/clk.h>
 #include <asm/mach_desc.h>
 
-/* called from unflatten_device_tree() to bootstrap devicetree itself */
-void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
-{
-	return __va(memblock_alloc(size, align));
-}
-
 /**
  * setup_machine_fdt - Machine setup when an dtb was passed to the kernel
  * @dt:		virtual address pointer to dt blob
diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S
index 1d71651..b908dde 100644
--- a/arch/arc/kernel/entry.S
+++ b/arch/arc/kernel/entry.S
@@ -267,12 +267,7 @@ ARC_EXIT handle_interrupt_level1
 
 ARC_ENTRY instr_service
 
-	EXCPN_PROLOG_FREEUP_REG r9
-
-	lr  r9, [erstatus]
-
-	SWITCH_TO_KERNEL_STK
-	SAVE_ALL_SYS
+	EXCEPTION_PROLOGUE
 
 	lr  r0, [efa]
 	mov r1, sp
@@ -289,15 +284,13 @@ ARC_EXIT instr_service
 
 ARC_ENTRY mem_service
 
-	EXCPN_PROLOG_FREEUP_REG r9
-
-	lr  r9, [erstatus]
-
-	SWITCH_TO_KERNEL_STK
-	SAVE_ALL_SYS
+	EXCEPTION_PROLOGUE
 
 	lr  r0, [efa]
 	mov r1, sp
+
+	FAKE_RET_FROM_EXCPN r9
+
 	bl  do_memory_error
 	b   ret_from_exception
 ARC_EXIT mem_service
@@ -308,11 +301,7 @@ ARC_EXIT mem_service
 
 ARC_ENTRY EV_MachineCheck
 
-	EXCPN_PROLOG_FREEUP_REG r9
-	lr  r9, [erstatus]
-
-	SWITCH_TO_KERNEL_STK
-	SAVE_ALL_SYS
+	EXCEPTION_PROLOGUE
 
 	lr  r2, [ecr]
 	lr  r0, [efa]
@@ -342,13 +331,7 @@ ARC_EXIT EV_MachineCheck
 
 ARC_ENTRY EV_TLBProtV
 
-	EXCPN_PROLOG_FREEUP_REG r9
-
-	;Which mode (user/kernel) was the system in when Exception occured
-	lr  r9, [erstatus]
-
-	SWITCH_TO_KERNEL_STK
-	SAVE_ALL_SYS
+	EXCEPTION_PROLOGUE
 
 	;---------(3) Save some more regs-----------------
 	;  vineetg: Mar 6th: Random Seg Fault issue #1
@@ -406,12 +389,7 @@ ARC_EXIT EV_TLBProtV
 ; ---------------------------------------------
 ARC_ENTRY EV_PrivilegeV
 
-	EXCPN_PROLOG_FREEUP_REG r9
-
-	lr  r9, [erstatus]
-
-	SWITCH_TO_KERNEL_STK
-	SAVE_ALL_SYS
+	EXCEPTION_PROLOGUE
 
 	lr  r0, [efa]
 	mov r1, sp
@@ -427,14 +405,13 @@ ARC_EXIT EV_PrivilegeV
 ; ---------------------------------------------
 ARC_ENTRY EV_Extension
 
-	EXCPN_PROLOG_FREEUP_REG r9
-	lr  r9, [erstatus]
-
-	SWITCH_TO_KERNEL_STK
-	SAVE_ALL_SYS
+	EXCEPTION_PROLOGUE
 
 	lr  r0, [efa]
 	mov r1, sp
+
+	FAKE_RET_FROM_EXCPN r9
+
 	bl  do_extension_fault
 	b   ret_from_exception
 ARC_EXIT EV_Extension
@@ -526,14 +503,7 @@ trap_with_param:
 
 ARC_ENTRY EV_Trap
 
-	; Need at least 1 reg to code the early exception prolog
-	EXCPN_PROLOG_FREEUP_REG r9
-
-	;Which mode (user/kernel) was the system in when intr occured
-	lr  r9, [erstatus]
-
-	SWITCH_TO_KERNEL_STK
-	SAVE_ALL_SYS
+	EXCEPTION_PROLOGUE
 
 	;------- (4) What caused the Trap --------------
 	lr     r12, [ecr]
@@ -642,6 +612,9 @@ resume_kernel_mode:
 
 #ifdef CONFIG_PREEMPT
 
+	; This is a must for preempt_schedule_irq()
+	IRQ_DISABLE	r9
+
 	; Can't preempt if preemption disabled
 	GET_CURR_THR_INFO_FROM_SP   r10
 	ld  r8, [r10, THREAD_INFO_PREEMPT_COUNT]
@@ -651,8 +624,6 @@ resume_kernel_mode:
 	ld  r9, [r10, THREAD_INFO_FLAGS]
 	bbit0  r9, TIF_NEED_RESCHED, restore_regs
 
-	IRQ_DISABLE	r9
-
 	; Invoke PREEMPTION
 	bl      preempt_schedule_irq
 
@@ -665,12 +636,11 @@ resume_kernel_mode:
 ;
 ; Restore the saved sys context (common exit-path for EXCPN/IRQ/Trap)
 ; IRQ shd definitely not happen between now and rtie
+; All 2 entry points to here already disable interrupts
 
 restore_regs :
 
-	; Disable Interrupts while restoring reg-file back
-	; XXX can this be optimised out
-	IRQ_DISABLE_SAVE    r9, r10	;@r10 has prisitine (pre-disable) copy
+	lr	r10, [status32]
 
 	; Restore REG File. In case multiple Events outstanding,
 	; use the same priorty as rtie: EXCPN, L2 IRQ, L1 IRQ, None
diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S
index 2a913f8..0f944f0 100644
--- a/arch/arc/kernel/head.S
+++ b/arch/arc/kernel/head.S
@@ -34,6 +34,9 @@ stext:
 	;	IDENTITY Reg [ 3  2  1  0 ]
 	;	(cpu-id)             ^^^	=> Zero for UP ARC700
 	;					=> #Core-ID if SMP (Master 0)
+	; Note that non-boot CPUs might not land here if halt-on-reset and
+	; instead breath life from @first_lines_of_secondary, but we still
+	; need to make sure only boot cpu takes this path.
 	GET_CPU_ID  r5
 	cmp	r5, 0
 	jnz	arc_platform_smp_wait_to_boot
@@ -98,6 +101,8 @@ stext:
 
 first_lines_of_secondary:
 
+	sr	@_int_vec_base_lds, [AUX_INTR_VEC_BASE]
+
 	; setup per-cpu idle task as "current" on this CPU
 	ld	r0, [@secondary_idle_tsk]
 	SET_CURR_TASK_ON_CPU  r0, r1
diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c
index 305b3f8..5fc9245 100644
--- a/arch/arc/kernel/irq.c
+++ b/arch/arc/kernel/irq.c
@@ -24,7 +24,6 @@
  * -Needed for each CPU (hence not foldable into init_IRQ)
  *
  * what it does ?
- * -setup Vector Table Base Reg - in case Linux not linked at 0x8000_0000
  * -Disable all IRQs (on CPU side)
  * -Optionally, setup the High priority Interrupts as Level 2 IRQs
  */
diff --git a/arch/arc/kernel/ptrace.c b/arch/arc/kernel/ptrace.c
index 3332385..5d76706 100644
--- a/arch/arc/kernel/ptrace.c
+++ b/arch/arc/kernel/ptrace.c
@@ -102,7 +102,7 @@ static int genregs_set(struct task_struct *target,
 	REG_IGNORE_ONE(pad2);
 	REG_IN_CHUNK(callee, efa, cregs);	/* callee_regs[r25..r13] */
 	REG_IGNORE_ONE(efa);			/* efa update invalid */
-	REG_IN_ONE(stop_pc, &ptregs->ret);	/* stop_pc: PC update */
+	REG_IGNORE_ONE(stop_pc);			/* PC updated via @ret */
 
 	return ret;
 }
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index 6b08345..2c68bc7e 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -47,10 +47,7 @@ void read_arc_build_cfg_regs(void)
 	READ_BCR(AUX_IDENTITY, cpu->core);
 
 	cpu->timers = read_aux_reg(ARC_REG_TIMERS_BCR);
-
 	cpu->vec_base = read_aux_reg(AUX_INTR_VEC_BASE);
-	if (cpu->vec_base == 0)
-		cpu->vec_base = (unsigned int)_int_vec_base_lds;
 
 	READ_BCR(ARC_REG_D_UNCACH_BCR, uncached_space);
 	cpu->uncached_base = uncached_space.start << 24;
@@ -357,8 +354,6 @@ void __init setup_arch(char **cmdline_p)
 	 */
 	root_mountflags &= ~MS_RDONLY;
 
-	console_verbose();
-
 #if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
 	conswitchp = &dummy_con;
 #endif
diff --git a/arch/arc/kernel/signal.c b/arch/arc/kernel/signal.c
index ee6ef2f..7e95e1a 100644
--- a/arch/arc/kernel/signal.c
+++ b/arch/arc/kernel/signal.c
@@ -101,7 +101,6 @@ SYSCALL_DEFINE0(rt_sigreturn)
 {
 	struct rt_sigframe __user *sf;
 	unsigned int magic;
-	int err;
 	struct pt_regs *regs = current_pt_regs();
 
 	/* Always make any pending restarted system calls return -EINTR */
@@ -119,15 +118,16 @@ SYSCALL_DEFINE0(rt_sigreturn)
 	if (!access_ok(VERIFY_READ, sf, sizeof(*sf)))
 		goto badframe;
 
-	err = restore_usr_regs(regs, sf);
-	err |= __get_user(magic, &sf->sigret_magic);
-	if (err)
+	if (__get_user(magic, &sf->sigret_magic))
 		goto badframe;
 
 	if (unlikely(is_do_ss_needed(magic)))
 		if (restore_altstack(&sf->uc.uc_stack))
 			goto badframe;
 
+	if (restore_usr_regs(regs, sf))
+		goto badframe;
+
 	/* Don't restart from sigreturn */
 	syscall_wont_restart(regs);
 
@@ -191,6 +191,15 @@ setup_rt_frame(int signo, struct k_sigaction *ka, siginfo_t *info,
 		return 1;
 
 	/*
+	 * w/o SA_SIGINFO, struct ucontext is partially populated (only
+	 * uc_mcontext/uc_sigmask) for kernel's normal user state preservation
+	 * during signal handler execution. This works for SA_SIGINFO as well
+	 * although the semantics are now overloaded (the same reg state can be
+	 * inspected by userland: but are they allowed to fiddle with it ?
+	 */
+	err |= stash_usr_regs(sf, regs, set);
+
+	/*
 	 * SA_SIGINFO requires 3 args to signal handler:
 	 *  #1: sig-no (common to any handler)
 	 *  #2: struct siginfo
@@ -213,14 +222,6 @@ setup_rt_frame(int signo, struct k_sigaction *ka, siginfo_t *info,
 		magic = MAGIC_SIGALTSTK;
 	}
 
-	/*
-	 * w/o SA_SIGINFO, struct ucontext is partially populated (only
-	 * uc_mcontext/uc_sigmask) for kernel's normal user state preservation
-	 * during signal handler execution. This works for SA_SIGINFO as well
-	 * although the semantics are now overloaded (the same reg state can be
-	 * inspected by userland: but are they allowed to fiddle with it ?
-	 */
-	err |= stash_usr_regs(sf, regs, set);
 	err |= __put_user(magic, &sf->sigret_magic);
 	if (err)
 		return err;
diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c
index 0e51e69..3fde7de 100644
--- a/arch/arc/kernel/time.c
+++ b/arch/arc/kernel/time.c
@@ -227,12 +227,9 @@ void __attribute__((weak)) arc_local_timer_setup(unsigned int cpu)
 {
 	struct clock_event_device *clk = &per_cpu(arc_clockevent_device, cpu);
 
-	clockevents_calc_mult_shift(clk, arc_get_core_freq(), 5);
-
-	clk->max_delta_ns = clockevent_delta2ns(ARC_TIMER_MAX, clk);
 	clk->cpumask = cpumask_of(cpu);
-
-	clockevents_register_device(clk);
+	clockevents_config_and_register(clk, arc_get_core_freq(),
+					0, ARC_TIMER_MAX);
 
 	/*
 	 * setup the per-cpu timer IRQ handler - for all cpus
diff --git a/arch/arc/kernel/unaligned.c b/arch/arc/kernel/unaligned.c
index c0f832f..7ff5b5c 100644
--- a/arch/arc/kernel/unaligned.c
+++ b/arch/arc/kernel/unaligned.c
@@ -16,6 +16,16 @@
 #include <linux/uaccess.h>
 #include <asm/disasm.h>
 
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define BE		1
+#define FIRST_BYTE_16	"swap %1, %1\n swape %1, %1\n"
+#define FIRST_BYTE_32	"swape %1, %1\n"
+#else
+#define BE		0
+#define FIRST_BYTE_16
+#define FIRST_BYTE_32
+#endif
+
 #define __get8_unaligned_check(val, addr, err)		\
 	__asm__(					\
 	"1:	ldb.ab	%1, [%2, 1]\n"			\
@@ -36,9 +46,9 @@
 	do {						\
 		unsigned int err = 0, v, a = addr;	\
 		__get8_unaligned_check(v, a, err);	\
-		val =  v ;				\
+		val =  v << ((BE) ? 8 : 0);		\
 		__get8_unaligned_check(v, a, err);	\
-		val |= v << 8;				\
+		val |= v << ((BE) ? 0 : 8);		\
 		if (err)				\
 			goto fault;			\
 	} while (0)
@@ -47,13 +57,13 @@
 	do {						\
 		unsigned int err = 0, v, a = addr;	\
 		__get8_unaligned_check(v, a, err);	\
-		val =  v << 0;				\
+		val =  v << ((BE) ? 24 : 0);		\
 		__get8_unaligned_check(v, a, err);	\
-		val |= v << 8;				\
+		val |= v << ((BE) ? 16 : 8);		\
 		__get8_unaligned_check(v, a, err);	\
-		val |= v << 16;				\
+		val |= v << ((BE) ? 8 : 16);		\
 		__get8_unaligned_check(v, a, err);	\
-		val |= v << 24;				\
+		val |= v << ((BE) ? 0 : 24);		\
 		if (err)				\
 			goto fault;			\
 	} while (0)
@@ -63,6 +73,7 @@
 		unsigned int err = 0, v = val, a = addr;\
 							\
 		__asm__(				\
+		FIRST_BYTE_16				\
 		"1:	stb.ab	%1, [%2, 1]\n"		\
 		"	lsr %1, %1, 8\n"		\
 		"2:	stb	%1, [%2]\n"		\
@@ -87,8 +98,9 @@
 #define put32_unaligned_check(val, addr)		\
 	do {						\
 		unsigned int err = 0, v = val, a = addr;\
-		__asm__(				\
 							\
+		__asm__(				\
+		FIRST_BYTE_32				\
 		"1:	stb.ab	%1, [%2, 1]\n"		\
 		"	lsr %1, %1, 8\n"		\
 		"2:	stb.ab	%1, [%2, 1]\n"		\
@@ -233,6 +245,12 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
 		regs->status32 &= ~STATUS_DE_MASK;
 	} else {
 		regs->ret += state.instr_len;
+
+		/* handle zero-overhead-loop */
+		if ((regs->ret == regs->lp_end) && (regs->lp_count)) {
+			regs->ret = regs->lp_start;
+			regs->lp_count--;
+		}
 	}
 
 	return 0;
diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c
index f415d85..5a1259c 100644
--- a/arch/arc/mm/cache_arc700.c
+++ b/arch/arc/mm/cache_arc700.c
@@ -622,12 +622,12 @@ void flush_icache_range(unsigned long kstart, unsigned long kend)
 /*
  * General purpose helper to make I and D cache lines consistent.
  * @paddr is phy addr of region
- * @vaddr is typically user or kernel vaddr (vmalloc)
- *    Howver in one instance, flush_icache_range() by kprobe (for a breakpt in
+ * @vaddr is typically user vaddr (breakpoint) or kernel vaddr (vmalloc)
+ *    However in one instance, when called by kprobe (for a breakpt in
  *    builtin kernel code) @vaddr will be paddr only, meaning CDU operation will
  *    use a paddr to index the cache (despite VIPT). This is fine since since a
- *    built-in kernel page will not have any virtual mappings (not even kernel)
- *    kprobe on loadable module is different as it will have kvaddr.
+ *    builtin kernel page will not have any virtual mappings.
+ *    kprobe on loadable module will be kernel vaddr.
  */
 void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len)
 {
diff --git a/arch/arc/mm/fault.c b/arch/arc/mm/fault.c
index 0fd1f0d..0c14d8a 100644
--- a/arch/arc/mm/fault.c
+++ b/arch/arc/mm/fault.c
@@ -17,7 +17,7 @@
 #include <asm/pgalloc.h>
 #include <asm/mmu.h>
 
-static int handle_vmalloc_fault(struct mm_struct *mm, unsigned long address)
+static int handle_vmalloc_fault(unsigned long address)
 {
 	/*
 	 * Synchronize this task's top level page-table
@@ -27,7 +27,7 @@ static int handle_vmalloc_fault(struct mm_struct *mm, unsigned long address)
 	pud_t *pud, *pud_k;
 	pmd_t *pmd, *pmd_k;
 
-	pgd = pgd_offset_fast(mm, address);
+	pgd = pgd_offset_fast(current->active_mm, address);
 	pgd_k = pgd_offset_k(address);
 
 	if (!pgd_present(*pgd_k))
@@ -60,8 +60,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address)
 	siginfo_t info;
 	int fault, ret;
 	int write = regs->ecr_cause & ECR_C_PROTV_STORE;  /* ST/EX */
-	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
-				(write ? FAULT_FLAG_WRITE : 0);
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
 
 	/*
 	 * We fault-in kernel-space virtual memory on-demand. The
@@ -73,7 +72,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address)
 	 * nothing more.
 	 */
 	if (address >= VMALLOC_START && address <= VMALLOC_END) {
-		ret = handle_vmalloc_fault(mm, address);
+		ret = handle_vmalloc_fault(address);
 		if (unlikely(ret))
 			goto bad_area_nosemaphore;
 		else
@@ -89,6 +88,8 @@ void do_page_fault(struct pt_regs *regs, unsigned long address)
 	if (in_atomic() || !mm)
 		goto no_context;
 
+	if (user_mode(regs))
+		flags |= FAULT_FLAG_USER;
 retry:
 	down_read(&mm->mmap_sem);
 	vma = find_vma(mm, address);
@@ -117,12 +118,12 @@ good_area:
 	if (write) {
 		if (!(vma->vm_flags & VM_WRITE))
 			goto bad_area;
+		flags |= FAULT_FLAG_WRITE;
 	} else {
 		if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
 			goto bad_area;
 	}
 
-survive:
 	/*
 	 * If for any reason at all we couldn't handle the fault,
 	 * make sure we exit gracefully rather than endlessly redo
@@ -201,10 +202,6 @@ no_context:
 	die("Oops", regs, address);
 
 out_of_memory:
-	if (is_global_init(tsk)) {
-		yield();
-		goto survive;
-	}
 	up_read(&mm->mmap_sem);
 
 	if (user_mode(regs)) {
diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c
index a08ce71..81279ec 100644
--- a/arch/arc/mm/init.c
+++ b/arch/arc/mm/init.c
@@ -127,9 +127,8 @@ void __init free_initrd_mem(unsigned long start, unsigned long end)
 #endif
 
 #ifdef CONFIG_OF_FLATTREE
-void __init early_init_dt_setup_initrd_arch(unsigned long start,
-					    unsigned long end)
+void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
 {
-	pr_err("%s(%lx, %lx)\n", __func__, start, end);
+	pr_err("%s(%llx, %llx)\n", __func__, start, end);
 }
 #endif /* CONFIG_OF_FLATTREE */
diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
index 7957dc4..71cb26d 100644
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -52,6 +52,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/bug.h>
 #include <asm/arcregs.h>
 #include <asm/setup.h>
 #include <asm/mmu_context.h>
@@ -99,48 +100,45 @@
 
 
 /* A copy of the ASID from the PID reg is kept in asid_cache */
-int asid_cache = FIRST_ASID;
-
-/* ASID to mm struct mapping. We have one extra entry corresponding to
- * NO_ASID to save us a compare when clearing the mm entry for old asid
- * see get_new_mmu_context (asm-arc/mmu_context.h)
- */
-struct mm_struct *asid_mm_map[NUM_ASID + 1];
+unsigned int asid_cache = MM_CTXT_FIRST_CYCLE;
 
 /*
  * Utility Routine to erase a J-TLB entry
- * The procedure is to look it up in the MMU. If found, ERASE it by
- *  issuing a TlbWrite CMD with PD0 = PD1 = 0
+ * Caller needs to setup Index Reg (manually or via getIndex)
  */
-
-static void __tlb_entry_erase(void)
+static inline void __tlb_entry_erase(void)
 {
 	write_aux_reg(ARC_REG_TLBPD1, 0);
 	write_aux_reg(ARC_REG_TLBPD0, 0);
 	write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite);
 }
 
-static void tlb_entry_erase(unsigned int vaddr_n_asid)
+static inline unsigned int tlb_entry_lkup(unsigned long vaddr_n_asid)
 {
 	unsigned int idx;
 
-	/* Locate the TLB entry for this vaddr + ASID */
 	write_aux_reg(ARC_REG_TLBPD0, vaddr_n_asid);
+
 	write_aux_reg(ARC_REG_TLBCOMMAND, TLBProbe);
 	idx = read_aux_reg(ARC_REG_TLBINDEX);
 
+	return idx;
+}
+
+static void tlb_entry_erase(unsigned int vaddr_n_asid)
+{
+	unsigned int idx;
+
+	/* Locate the TLB entry for this vaddr + ASID */
+	idx = tlb_entry_lkup(vaddr_n_asid);
+
 	/* No error means entry found, zero it out */
 	if (likely(!(idx & TLB_LKUP_ERR))) {
 		__tlb_entry_erase();
-	} else {		/* Some sort of Error */
-
+	} else {
 		/* Duplicate entry error */
-		if (idx & 0x1) {
-			/* TODO we need to handle this case too */
-			pr_emerg("unhandled Duplicate flush for %x\n",
-			       vaddr_n_asid);
-		}
-		/* else entry not found so nothing to do */
+		WARN(idx == TLB_DUP_ERR, "Probe returned Dup PD for %x\n",
+					   vaddr_n_asid);
 	}
 }
 
@@ -159,7 +157,7 @@ static void utlb_invalidate(void)
 {
 #if (CONFIG_ARC_MMU_VER >= 2)
 
-#if (CONFIG_ARC_MMU_VER < 3)
+#if (CONFIG_ARC_MMU_VER == 2)
 	/* MMU v2 introduced the uTLB Flush command.
 	 * There was however an obscure hardware bug, where uTLB flush would
 	 * fail when a prior probe for J-TLB (both totally unrelated) would
@@ -182,6 +180,36 @@ static void utlb_invalidate(void)
 
 }
 
+static void tlb_entry_insert(unsigned int pd0, unsigned int pd1)
+{
+	unsigned int idx;
+
+	/*
+	 * First verify if entry for this vaddr+ASID already exists
+	 * This also sets up PD0 (vaddr, ASID..) for final commit
+	 */
+	idx = tlb_entry_lkup(pd0);
+
+	/*
+	 * If Not already present get a free slot from MMU.
+	 * Otherwise, Probe would have located the entry and set INDEX Reg
+	 * with existing location. This will cause Write CMD to over-write
+	 * existing entry with new PD0 and PD1
+	 */
+	if (likely(idx & TLB_LKUP_ERR))
+		write_aux_reg(ARC_REG_TLBCOMMAND, TLBGetIndex);
+
+	/* setup the other half of TLB entry (pfn, rwx..) */
+	write_aux_reg(ARC_REG_TLBPD1, pd1);
+
+	/*
+	 * Commit the Entry to MMU
+	 * It doesnt sound safe to use the TLBWriteNI cmd here
+	 * which doesn't flush uTLBs. I'd rather be safe than sorry.
+	 */
+	write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite);
+}
+
 /*
  * Un-conditionally (without lookup) erase the entire MMU contents
  */
@@ -224,13 +252,14 @@ noinline void local_flush_tlb_mm(struct mm_struct *mm)
 		return;
 
 	/*
-	 * Workaround for Android weirdism:
-	 * A binder VMA could end up in a task such that vma->mm != tsk->mm
-	 * old code would cause h/w - s/w ASID to get out of sync
+	 * - Move to a new ASID, but only if the mm is still wired in
+	 *   (Android Binder ended up calling this for vma->mm != tsk->mm,
+	 *    causing h/w - s/w ASID to get out of sync)
+	 * - Also get_new_mmu_context() new implementation allocates a new
+	 *   ASID only if it is not allocated already - so unallocate first
 	 */
-	if (current->mm != mm)
-		destroy_context(mm);
-	else
+	destroy_context(mm);
+	if (current->mm == mm)
 		get_new_mmu_context(mm);
 }
 
@@ -246,7 +275,6 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 			   unsigned long end)
 {
 	unsigned long flags;
-	unsigned int asid;
 
 	/* If range @start to @end is more than 32 TLB entries deep,
 	 * its better to move to a new ASID rather than searching for
@@ -268,11 +296,10 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 	start &= PAGE_MASK;
 
 	local_irq_save(flags);
-	asid = vma->vm_mm->context.asid;
 
-	if (asid != NO_ASID) {
+	if (vma->vm_mm->context.asid != MM_CTXT_NO_ASID) {
 		while (start < end) {
-			tlb_entry_erase(start | (asid & 0xff));
+			tlb_entry_erase(start | hw_pid(vma->vm_mm));
 			start += PAGE_SIZE;
 		}
 	}
@@ -326,9 +353,8 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
 	 */
 	local_irq_save(flags);
 
-	if (vma->vm_mm->context.asid != NO_ASID) {
-		tlb_entry_erase((page & PAGE_MASK) |
-				(vma->vm_mm->context.asid & 0xff));
+	if (vma->vm_mm->context.asid != MM_CTXT_NO_ASID) {
+		tlb_entry_erase((page & PAGE_MASK) | hw_pid(vma->vm_mm));
 		utlb_invalidate();
 	}
 
@@ -341,8 +367,8 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
 void create_tlb(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
 {
 	unsigned long flags;
-	unsigned int idx, asid_or_sasid;
-	unsigned long pd0_flags;
+	unsigned int asid_or_sasid, rwx;
+	unsigned long pd0, pd1;
 
 	/*
 	 * create_tlb() assumes that current->mm == vma->mm, since
@@ -381,40 +407,30 @@ void create_tlb(struct vm_area_struct *vma, unsigned long address, pte_t *ptep)
 	/* update this PTE credentials */
 	pte_val(*ptep) |= (_PAGE_PRESENT | _PAGE_ACCESSED);
 
-	/* Create HW TLB entry Flags (in PD0) from PTE Flags */
-#if (CONFIG_ARC_MMU_VER <= 2)
-	pd0_flags = ((pte_val(*ptep) & PTE_BITS_IN_PD0) >> 1);
-#else
-	pd0_flags = ((pte_val(*ptep) & PTE_BITS_IN_PD0));
-#endif
+	/* Create HW TLB(PD0,PD1) from PTE  */
 
 	/* ASID for this task */
 	asid_or_sasid = read_aux_reg(ARC_REG_PID) & 0xff;
 
-	write_aux_reg(ARC_REG_TLBPD0, address | pd0_flags | asid_or_sasid);
-
-	/* Load remaining info in PD1 (Page Frame Addr and Kx/Kw/Kr Flags) */
-	write_aux_reg(ARC_REG_TLBPD1, (pte_val(*ptep) & PTE_BITS_IN_PD1));
-
-	/* First verify if entry for this vaddr+ASID already exists */
-	write_aux_reg(ARC_REG_TLBCOMMAND, TLBProbe);
-	idx = read_aux_reg(ARC_REG_TLBINDEX);
+	pd0 = address | asid_or_sasid | (pte_val(*ptep) & PTE_BITS_IN_PD0);
 
 	/*
-	 * If Not already present get a free slot from MMU.
-	 * Otherwise, Probe would have located the entry and set INDEX Reg
-	 * with existing location. This will cause Write CMD to over-write
-	 * existing entry with new PD0 and PD1
+	 * ARC MMU provides fully orthogonal access bits for K/U mode,
+	 * however Linux only saves 1 set to save PTE real-estate
+	 * Here we convert 3 PTE bits into 6 MMU bits:
+	 * -Kernel only entries have Kr Kw Kx 0 0 0
+	 * -User entries have mirrored K and U bits
 	 */
-	if (likely(idx & TLB_LKUP_ERR))
-		write_aux_reg(ARC_REG_TLBCOMMAND, TLBGetIndex);
+	rwx = pte_val(*ptep) & PTE_BITS_RWX;
 
-	/*
-	 * Commit the Entry to MMU
-	 * It doesnt sound safe to use the TLBWriteNI cmd here
-	 * which doesn't flush uTLBs. I'd rather be safe than sorry.
-	 */
-	write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite);
+	if (pte_val(*ptep) & _PAGE_GLOBAL)
+		rwx <<= 3;		/* r w x => Kr Kw Kx 0 0 0 */
+	else
+		rwx |= (rwx << 3);	/* r w x => Kr Kw Kx Ur Uw Ux */
+
+	pd1 = rwx | (pte_val(*ptep) & PTE_BITS_NON_RWX_IN_PD1);
+
+	tlb_entry_insert(pd0, pd1);
 
 	local_irq_restore(flags);
 }
@@ -553,13 +569,6 @@ void arc_mmu_init(void)
 	if (mmu->pg_sz != PAGE_SIZE)
 		panic("MMU pg size != PAGE_SIZE (%luk)\n", TO_KB(PAGE_SIZE));
 
-	/*
-	 * ASID mgmt data structures are compile time init
-	 *  asid_cache = FIRST_ASID and asid_mm_map[] all zeroes
-	 */
-
-	local_flush_tlb_all();
-
 	/* Enable the MMU */
 	write_aux_reg(ARC_REG_PID, MMU_ENABLE);
 
@@ -671,25 +680,28 @@ void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
  * Low Level ASM TLB handler calls this if it finds that HW and SW ASIDS
  * don't match
  */
-void print_asid_mismatch(int is_fast_path)
+void print_asid_mismatch(int mm_asid, int mmu_asid, int is_fast_path)
 {
-	int pid_sw, pid_hw;
-	pid_sw = current->active_mm->context.asid;
-	pid_hw = read_aux_reg(ARC_REG_PID) & 0xff;
-
 	pr_emerg("ASID Mismatch in %s Path Handler: sw-pid=0x%x hw-pid=0x%x\n",
-	       is_fast_path ? "Fast" : "Slow", pid_sw, pid_hw);
+	       is_fast_path ? "Fast" : "Slow", mm_asid, mmu_asid);
 
 	__asm__ __volatile__("flag 1");
 }
 
-void tlb_paranoid_check(unsigned int pid_sw, unsigned long addr)
+void tlb_paranoid_check(unsigned int mm_asid, unsigned long addr)
 {
-	unsigned int pid_hw;
+	unsigned int mmu_asid;
 
-	pid_hw = read_aux_reg(ARC_REG_PID) & 0xff;
+	mmu_asid = read_aux_reg(ARC_REG_PID) & 0xff;
 
-	if (addr < 0x70000000 && ((pid_hw != pid_sw) || (pid_sw == NO_ASID)))
-		print_asid_mismatch(0);
+	/*
+	 * At the time of a TLB miss/installation
+	 *   - HW version needs to match SW version
+	 *   - SW needs to have a valid ASID
+	 */
+	if (addr < 0x70000000 &&
+	    ((mm_asid == MM_CTXT_NO_ASID) ||
+	      (mmu_asid != (mm_asid & MM_CTXT_ASID_MASK))))
+		print_asid_mismatch(mm_asid, mmu_asid, 0);
 }
 #endif
diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S
index 5c5bb23..cf7d7d9 100644
--- a/arch/arc/mm/tlbex.S
+++ b/arch/arc/mm/tlbex.S
@@ -44,17 +44,36 @@
 #include <asm/arcregs.h>
 #include <asm/cache.h>
 #include <asm/processor.h>
-#if (CONFIG_ARC_MMU_VER == 1)
 #include <asm/tlb-mmu1.h>
-#endif
 
-;--------------------------------------------------------------------------
-; scratch memory to save the registers (r0-r3) used to code TLB refill Handler
-; For details refer to comments before TLBMISS_FREEUP_REGS below
+;-----------------------------------------------------------------
+; ARC700 Exception Handling doesn't auto-switch stack and it only provides
+; ONE scratch AUX reg "ARC_REG_SCRATCH_DATA0"
+;
+; For Non-SMP, the scratch AUX reg is repurposed to cache task PGD, so a
+; "global" is used to free-up FIRST core reg to be able to code the rest of
+; exception prologue (IRQ auto-disabled on Exceptions, so it's IRQ-safe).
+; Since the Fast Path TLB Miss handler is coded with 4 regs, the remaining 3
+; need to be saved as well by extending the "global" to be 4 words. Hence
+;	".size   ex_saved_reg1, 16"
+; [All of this dance is to avoid stack switching for each TLB Miss, since we
+; only need to save only a handful of regs, as opposed to complete reg file]
+;
+; For ARC700 SMP, the "global" obviously can't be used for free up the FIRST
+; core reg as it will not be SMP safe.
+; Thus scratch AUX reg is used (and no longer used to cache task PGD).
+; To save the rest of 3 regs - per cpu, the global is made "per-cpu".
+; Epilogue thus has to locate the "per-cpu" storage for regs.
+; To avoid cache line bouncing the per-cpu global is aligned/sized per
+; L1_CACHE_SHIFT, despite fundamentally needing to be 12 bytes only. Hence
+;	".size   ex_saved_reg1, (CONFIG_NR_CPUS << L1_CACHE_SHIFT)"
+
+; As simple as that....
 ;--------------------------------------------------------------------------
 
+; scratch memory to save [r0-r3] used to code TLB refill Handler
 ARCFP_DATA ex_saved_reg1
-	.align 1 << L1_CACHE_SHIFT	; IMP: Must be Cache Line aligned
+	.align 1 << L1_CACHE_SHIFT
 	.type   ex_saved_reg1, @object
 #ifdef CONFIG_SMP
 	.size   ex_saved_reg1, (CONFIG_NR_CPUS << L1_CACHE_SHIFT)
@@ -66,6 +85,44 @@ ex_saved_reg1:
 	.zero 16
 #endif
 
+.macro TLBMISS_FREEUP_REGS
+#ifdef CONFIG_SMP
+	sr  r0, [ARC_REG_SCRATCH_DATA0]	; freeup r0 to code with
+	GET_CPU_ID  r0			; get to per cpu scratch mem,
+	lsl r0, r0, L1_CACHE_SHIFT	; cache line wide per cpu
+	add r0, @ex_saved_reg1, r0
+#else
+	st    r0, [@ex_saved_reg1]
+	mov_s r0, @ex_saved_reg1
+#endif
+	st_s  r1, [r0, 4]
+	st_s  r2, [r0, 8]
+	st_s  r3, [r0, 12]
+
+	; VERIFY if the ASID in MMU-PID Reg is same as
+	; one in Linux data structures
+
+	tlb_paranoid_check_asm
+.endm
+
+.macro TLBMISS_RESTORE_REGS
+#ifdef CONFIG_SMP
+	GET_CPU_ID  r0			; get to per cpu scratch mem
+	lsl r0, r0, L1_CACHE_SHIFT	; each is cache line wide
+	add r0, @ex_saved_reg1, r0
+	ld_s  r3, [r0,12]
+	ld_s  r2, [r0, 8]
+	ld_s  r1, [r0, 4]
+	lr    r0, [ARC_REG_SCRATCH_DATA0]
+#else
+	mov_s r0, @ex_saved_reg1
+	ld_s  r3, [r0,12]
+	ld_s  r2, [r0, 8]
+	ld_s  r1, [r0, 4]
+	ld_s  r0, [r0]
+#endif
+.endm
+
 ;============================================================================
 ;  Troubleshooting Stuff
 ;============================================================================
@@ -76,34 +133,35 @@ ex_saved_reg1:
 ; In bizzare scenrios SW and HW ASID can get out-of-sync which is trouble.
 ; So we try to detect this in TLB Mis shandler
 
-
-.macro DBG_ASID_MISMATCH
+.macro tlb_paranoid_check_asm
 
 #ifdef CONFIG_ARC_DBG_TLB_PARANOIA
 
-	; make sure h/w ASID is same as s/w ASID
-
 	GET_CURR_TASK_ON_CPU  r3
 	ld r0, [r3, TASK_ACT_MM]
 	ld r0, [r0, MM_CTXT+MM_CTXT_ASID]
+	breq r0, 0, 55f	; Error if no ASID allocated
 
 	lr r1, [ARC_REG_PID]
 	and r1, r1, 0xFF
-	breq r1, r0, 5f
 
+	and r2, r0, 0xFF	; MMU PID bits only for comparison
+	breq r1, r2, 5f
+
+55:
 	; Error if H/w and S/w ASID don't match, but NOT if in kernel mode
-	lr  r0, [erstatus]
-	bbit0 r0, STATUS_U_BIT, 5f
+	lr  r2, [erstatus]
+	bbit0 r2, STATUS_U_BIT, 5f
 
 	; We sure are in troubled waters, Flag the error, but to do so
 	; need to switch to kernel mode stack to call error routine
 	GET_TSK_STACK_BASE   r3, sp
 
 	; Call printk to shoutout aloud
-	mov r0, 1
+	mov r2, 1
 	j print_asid_mismatch
 
-5:   ; ASIDs match so proceed normally
+5:	; ASIDs match so proceed normally
 	nop
 
 #endif
@@ -161,13 +219,17 @@ ex_saved_reg1:
 ; IN: r0 = PTE, r1 = ptr to PTE
 
 .macro CONV_PTE_TO_TLB
-	and r3, r0, PTE_BITS_IN_PD1 ; Extract permission flags+PFN from PTE
-	sr  r3, [ARC_REG_TLBPD1]    ; these go in PD1
+	and    r3, r0, PTE_BITS_RWX	;       r w x
+	lsl    r2, r3, 3		; r w x 0 0 0
+	and.f  0,  r0, _PAGE_GLOBAL
+	or.z   r2, r2, r3		; r w x r w x
+
+	and r3, r0, PTE_BITS_NON_RWX_IN_PD1 ; Extract PFN+cache bits from PTE
+	or  r3, r3, r2
+
+	sr  r3, [ARC_REG_TLBPD1]    	; these go in PD1
 
 	and r2, r0, PTE_BITS_IN_PD0 ; Extract other PTE flags: (V)alid, (G)lb
-#if (CONFIG_ARC_MMU_VER <= 2)   /* Neednot be done with v3 onwards */
-	lsr r2, r2                  ; shift PTE flags to match layout in PD0
-#endif
 
 	lr  r3,[ARC_REG_TLBPD0]     ; MMU prepares PD0 with vaddr and asid
 
@@ -191,68 +253,6 @@ ex_saved_reg1:
 #endif
 .endm
 
-;-----------------------------------------------------------------
-; ARC700 Exception Handling doesn't auto-switch stack and it only provides
-; ONE scratch AUX reg "ARC_REG_SCRATCH_DATA0"
-;
-; For Non-SMP, the scratch AUX reg is repurposed to cache task PGD, so a
-; "global" is used to free-up FIRST core reg to be able to code the rest of
-; exception prologue (IRQ auto-disabled on Exceptions, so it's IRQ-safe).
-; Since the Fast Path TLB Miss handler is coded with 4 regs, the remaining 3
-; need to be saved as well by extending the "global" to be 4 words. Hence
-;	".size   ex_saved_reg1, 16"
-; [All of this dance is to avoid stack switching for each TLB Miss, since we
-; only need to save only a handful of regs, as opposed to complete reg file]
-;
-; For ARC700 SMP, the "global" obviously can't be used for free up the FIRST
-; core reg as it will not be SMP safe.
-; Thus scratch AUX reg is used (and no longer used to cache task PGD).
-; To save the rest of 3 regs - per cpu, the global is made "per-cpu".
-; Epilogue thus has to locate the "per-cpu" storage for regs.
-; To avoid cache line bouncing the per-cpu global is aligned/sized per
-; L1_CACHE_SHIFT, despite fundamentally needing to be 12 bytes only. Hence
-;	".size   ex_saved_reg1, (CONFIG_NR_CPUS << L1_CACHE_SHIFT)"
-
-; As simple as that....
-
-.macro TLBMISS_FREEUP_REGS
-#ifdef CONFIG_SMP
-	sr  r0, [ARC_REG_SCRATCH_DATA0]	; freeup r0 to code with
-	GET_CPU_ID  r0			; get to per cpu scratch mem,
-	lsl r0, r0, L1_CACHE_SHIFT	; cache line wide per cpu
-	add r0, @ex_saved_reg1, r0
-#else
-	st    r0, [@ex_saved_reg1]
-	mov_s r0, @ex_saved_reg1
-#endif
-	st_s  r1, [r0, 4]
-	st_s  r2, [r0, 8]
-	st_s  r3, [r0, 12]
-
-	; VERIFY if the ASID in MMU-PID Reg is same as
-	; one in Linux data structures
-
-	DBG_ASID_MISMATCH
-.endm
-
-;-----------------------------------------------------------------
-.macro TLBMISS_RESTORE_REGS
-#ifdef CONFIG_SMP
-	GET_CPU_ID  r0			; get to per cpu scratch mem
-	lsl r0, r0, L1_CACHE_SHIFT	; each is cache line wide
-	add r0, @ex_saved_reg1, r0
-	ld_s  r3, [r0,12]
-	ld_s  r2, [r0, 8]
-	ld_s  r1, [r0, 4]
-	lr    r0, [ARC_REG_SCRATCH_DATA0]
-#else
-	mov_s r0, @ex_saved_reg1
-	ld_s  r3, [r0,12]
-	ld_s  r2, [r0, 8]
-	ld_s  r1, [r0, 4]
-	ld_s  r0, [r0]
-#endif
-.endm
 
 ARCFP_CODE	;Fast Path Code, candidate for ICCM
 
@@ -277,8 +277,8 @@ ARC_ENTRY EV_TLBMissI
 	;----------------------------------------------------------------
 	; VERIFY_PTE: Check if PTE permissions approp for executing code
 	cmp_s   r2, VMALLOC_START
-	mov.lo  r2, (_PAGE_PRESENT | _PAGE_U_EXECUTE)
-	mov.hs  r2, (_PAGE_PRESENT | _PAGE_K_EXECUTE)
+	mov_s   r2, (_PAGE_PRESENT | _PAGE_EXECUTE)
+	or.hs   r2, r2, _PAGE_GLOBAL
 
 	and     r3, r0, r2  ; Mask out NON Flag bits from PTE
 	xor.f   r3, r3, r2  ; check ( ( pte & flags_test ) == flags_test )
@@ -317,26 +317,21 @@ ARC_ENTRY EV_TLBMissD
 	;----------------------------------------------------------------
 	; VERIFY_PTE: Chk if PTE permissions approp for data access (R/W/R+W)
 
-	mov_s   r2, 0
+	cmp_s	r2, VMALLOC_START
+	mov_s   r2, _PAGE_PRESENT	; common bit for K/U PTE
+	or.hs	r2, r2, _PAGE_GLOBAL	; kernel PTE only
+
+	; Linux PTE [RWX] bits are semantically overloaded:
+	; -If PAGE_GLOBAL set, they refer to kernel-only flags (vmalloc)
+	; -Otherwise they are user-mode permissions, and those are exactly
+	;  same for kernel mode as well (e.g. copy_(to|from)_user)
+
 	lr      r3, [ecr]
 	btst_s  r3, ECR_C_BIT_DTLB_LD_MISS	; Read Access
-	or.nz   r2, r2, _PAGE_U_READ      	; chk for Read flag in PTE
+	or.nz   r2, r2, _PAGE_READ      	; chk for Read flag in PTE
 	btst_s  r3, ECR_C_BIT_DTLB_ST_MISS	; Write Access
-	or.nz   r2, r2, _PAGE_U_WRITE     	; chk for Write flag in PTE
-	; Above laddering takes care of XCHG access
-	;   which is both Read and Write
-
-	; If kernel mode access, ; make _PAGE_xx flags as _PAGE_K_xx
-	; For copy_(to|from)_user, despite exception taken in kernel mode,
-	; this code is not hit, because EFA would still be the user mode
-	; address (EFA < 0x6000_0000).
-	; This code is for legit kernel mode faults, vmalloc specifically
-	; (EFA: 0x7000_0000 to 0x7FFF_FFFF)
-
-	lr      r3, [efa]
-	cmp     r3, VMALLOC_START - 1   ; If kernel mode access
-	asl.hi  r2, r2, 3               ; make _PAGE_xx flags as _PAGE_K_xx
-	or      r2, r2, _PAGE_PRESENT   ; Common flag for K/U mode
+	or.nz   r2, r2, _PAGE_WRITE     	; chk for Write flag in PTE
+	; Above laddering takes care of XCHG access (both R and W)
 
 	; By now, r2 setup with all the Flags we need to check in PTE
 	and     r3, r0, r2              ; Mask out NON Flag bits from PTE
@@ -371,13 +366,7 @@ do_slow_path_pf:
 
 	; Slow path TLB Miss handled as a regular ARC Exception
 	; (stack switching / save the complete reg-file).
-	; That requires freeing up r9
-	EXCPN_PROLOG_FREEUP_REG r9
-
-	lr  r9, [erstatus]
-
-	SWITCH_TO_KERNEL_STK
-	SAVE_ALL_SYS
+	EXCEPTION_PROLOGUE
 
 	; ------- setup args for Linux Page fault Hanlder ---------
 	mov_s r0, sp
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 43594d5..04163fe 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -3,20 +3,21 @@ config ARM
 	default y
 	select ARCH_BINFMT_ELF_RANDOMIZE_PIE
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
-	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
+	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select BUILDTIME_EXTABLE_SORT if MMU
+	select CLONE_BACKWARDS
 	select CPU_PM if (SUSPEND || CPU_IDLE)
 	select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN && MMU
 	select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI)
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_PCI_IOMAP
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
-	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_STRNCPY_FROM_USER
 	select GENERIC_STRNLEN_USER
 	select HARDIRQS_SW_RESEND
@@ -25,6 +26,7 @@ config ARM
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_BPF_JIT
+	select HAVE_CONTEXT_TRACKING
 	select HAVE_C_RECORDMCOUNT
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_API_DEBUG
@@ -35,7 +37,6 @@ config ARM
 	select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
 	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
 	select HAVE_GENERIC_DMA_COHERENT
-	select HAVE_GENERIC_HARDIRQS
 	select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
 	select HAVE_IDE if PCI || ISA || PCMCIA
 	select HAVE_IRQ_TIME_ACCOUNTING
@@ -47,21 +48,22 @@ config ARM
 	select HAVE_KPROBES if !XIP_KERNEL
 	select HAVE_KRETPROBES if (HAVE_KPROBES)
 	select HAVE_MEMBLOCK
+	select HAVE_MOD_ARCH_SPECIFIC if ARM_UNWIND
 	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
 	select HAVE_PERF_EVENTS
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_UID16
+	select IRQ_FORCED_THREADING
 	select KTIME_SCALAR
+	select MODULES_USE_ELF_REL
+	select OLD_SIGACTION
+	select OLD_SIGSUSPEND3
 	select PERF_USE_VMALLOC
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION
-	select HAVE_MOD_ARCH_SPECIFIC if ARM_UNWIND
-	select MODULES_USE_ELF_REL
-	select CLONE_BACKWARDS
-	select OLD_SIGSUSPEND3
-	select OLD_SIGACTION
-	select HAVE_CONTEXT_TRACKING
+	# Above selects are sorted alphabetically; please add new ones
+	# according to that.  Thanks.
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -315,6 +317,7 @@ config ARCH_INTEGRATOR
 	select NEED_MACH_MEMORY_H
 	select PLAT_VERSATILE
 	select SPARSE_IRQ
+	select USE_OF
 	select VERSATILE_FPGA_IRQ
 	help
 	  Support for ARM's Integrator platform.
@@ -356,7 +359,6 @@ config ARCH_AT91
 	bool "Atmel AT91"
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
-	select HAVE_CLK
 	select IRQ_DOMAIN
 	select NEED_MACH_GPIO_H
 	select NEED_MACH_IO_H if PCCARD
@@ -370,7 +372,6 @@ config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
 	select ARCH_REQUIRE_GPIOLIB
 	select AUTO_ZRELADDR
-	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select COMMON_CLK
 	select CPU_ARM720T
@@ -384,9 +385,10 @@ config ARCH_CLPS711X
 config ARCH_GEMINI
 	bool "Cortina Systems Gemini"
 	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_USES_GETTIMEOFFSET
-	select NEED_MACH_GPIO_H
+	select CLKSRC_MMIO
 	select CPU_FA526
+	select GENERIC_CLOCKEVENTS
+	select NEED_MACH_GPIO_H
 	help
 	  Support for the Cortina Systems Gemini family SoCs
 
@@ -441,7 +443,6 @@ config ARCH_NETX
 config ARCH_IOP13XX
 	bool "IOP13xx-based"
 	depends on MMU
-	select ARCH_SUPPORTS_MSI
 	select CPU_XSC3
 	select NEED_MACH_MEMORY_H
 	select NEED_RET_TO_USER
@@ -487,8 +488,8 @@ config ARCH_IXP4XX
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
 	select NEED_MACH_IO_H
-	select USB_EHCI_BIG_ENDIAN_MMIO
 	select USB_EHCI_BIG_ENDIAN_DESC
+	select USB_EHCI_BIG_ENDIAN_MMIO
 	help
 	  Support for Intel's IXP4XX (XScale) family of processors.
 
@@ -498,11 +499,11 @@ config ARCH_DOVE
 	select CPU_PJ4
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
+	select MVEBU_MBUS
 	select PINCTRL
 	select PINCTRL_DOVE
 	select PLAT_ORION_LEGACY
 	select USB_ARCH_HAS_EHCI
-	select MVEBU_MBUS
 	help
 	  Support for the Marvell Dove SoC 88AP510
 
@@ -512,12 +513,12 @@ config ARCH_KIRKWOOD
 	select ARCH_REQUIRE_GPIOLIB
 	select CPU_FEROCEON
 	select GENERIC_CLOCKEVENTS
+	select MVEBU_MBUS
 	select PCI
 	select PCI_QUIRKS
 	select PINCTRL
 	select PINCTRL_KIRKWOOD
 	select PLAT_ORION_LEGACY
-	select MVEBU_MBUS
 	help
 	  Support for the following Marvell Kirkwood series SoCs:
 	  88F6180, 88F6192 and 88F6281.
@@ -527,9 +528,9 @@ config ARCH_MV78XX0
 	select ARCH_REQUIRE_GPIOLIB
 	select CPU_FEROCEON
 	select GENERIC_CLOCKEVENTS
+	select MVEBU_MBUS
 	select PCI
 	select PLAT_ORION_LEGACY
-	select MVEBU_MBUS
 	help
 	  Support for the following Marvell MV78xx0 series SoCs:
 	  MV781x0, MV782x0.
@@ -540,9 +541,9 @@ config ARCH_ORION5X
 	select ARCH_REQUIRE_GPIOLIB
 	select CPU_FEROCEON
 	select GENERIC_CLOCKEVENTS
+	select MVEBU_MBUS
 	select PCI
 	select PLAT_ORION_LEGACY
-	select MVEBU_MBUS
 	help
 	  Support for the following Marvell Orion 5x series SoCs:
 	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
@@ -557,6 +558,7 @@ config ARCH_MMP
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
 	select IRQ_DOMAIN
+	select MULTI_IRQ_HANDLER
 	select NEED_MACH_GPIO_H
 	select PINCTRL
 	select PLAT_PXA
@@ -629,7 +631,7 @@ config ARCH_PXA
 config ARCH_MSM
 	bool "Qualcomm MSM"
 	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
+	select CLKSRC_OF if OF
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	help
@@ -645,8 +647,7 @@ config ARCH_SHMOBILE
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
-	select HAVE_CLK
+	select HAVE_ARM_TWD if SMP
 	select HAVE_MACH_CLKDEV
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
@@ -700,10 +701,9 @@ config ARCH_S3C24XX
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
+	select CLKSRC_SAMSUNG_PWM
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
-	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
@@ -723,23 +723,23 @@ config ARCH_S3C64XX
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_VIC
 	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
+	select CLKSRC_SAMSUNG_PWM
+	select COMMON_CLK
 	select CPU_V6
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
-	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_TCM
 	select NEED_MACH_GPIO_H
 	select NO_IOPORT
 	select PLAT_SAMSUNG
+	select PM_GENERIC_DOMAINS
 	select S3C_DEV_NAND
 	select S3C_GPIO_TRACK
 	select SAMSUNG_ATAGS
-	select SAMSUNG_CLKSRC
 	select SAMSUNG_GPIOLIB_4BIT
-	select SAMSUNG_IRQ_VIC_TIMER
+	select SAMSUNG_WAKEMASK
 	select SAMSUNG_WDT_RESET
 	select USB_ARCH_HAS_OHCI
 	help
@@ -748,17 +748,16 @@ config ARCH_S3C64XX
 config ARCH_S5P64X0
 	bool "Samsung S5P6440 S5P6450"
 	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
+	select CLKSRC_SAMSUNG_PWM
 	select CPU_V6
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
-	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
 	select NEED_MACH_GPIO_H
-	select SAMSUNG_WDT_RESET
 	select SAMSUNG_ATAGS
+	select SAMSUNG_WDT_RESET
 	help
 	  Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
 	  SMDK6450.
@@ -767,17 +766,16 @@ config ARCH_S5PC100
 	bool "Samsung S5PC100"
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
+	select CLKSRC_SAMSUNG_PWM
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
-	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
 	select NEED_MACH_GPIO_H
-	select SAMSUNG_WDT_RESET
 	select SAMSUNG_ATAGS
+	select SAMSUNG_WDT_RESET
 	help
 	  Samsung S5PC100 series based systems
 
@@ -787,11 +785,10 @@ config ARCH_S5PV210
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_SPARSEMEM_ENABLE
 	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
+	select CLKSRC_SAMSUNG_PWM
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
-	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
@@ -808,11 +805,9 @@ config ARCH_EXYNOS
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SPARSEMEM_ENABLE
 	select ARM_GIC
-	select CLKDEV_LOOKUP
 	select COMMON_CLK
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
@@ -822,20 +817,6 @@ config ARCH_EXYNOS
 	help
 	  Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
 
-config ARCH_SHARK
-	bool "Shark"
-	select ARCH_USES_GETTIMEOFFSET
-	select CPU_SA110
-	select ISA
-	select ISA_DMA
-	select NEED_MACH_MEMORY_H
-	select PCI
-	select VIRT_TO_BUS
-	select ZONE_DMA
-	help
-	  Support for the StrongARM based Digital DNARD machine, also known
-	  as "Shark" (<http://www.shark-linux.de/shark.html>).
-
 config ARCH_DAVINCI
 	bool "TI DaVinci"
 	select ARCH_HAS_HOLES_MEMORYMODEL
@@ -845,7 +826,6 @@ config ARCH_DAVINCI
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
 	select HAVE_IDE
-	select NEED_MACH_GPIO_H
 	select TI_PRIV_EDMA
 	select USE_OF
 	select ZONE_DMA
@@ -863,7 +843,6 @@ config ARCH_OMAP1
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
-	select HAVE_CLK
 	select HAVE_IDE
 	select IRQ_DOMAIN
 	select NEED_MACH_IO_H if PCCARD
@@ -1007,9 +986,7 @@ source "arch/arm/mach-sti/Kconfig"
 
 source "arch/arm/mach-s3c24xx/Kconfig"
 
-if ARCH_S3C64XX
 source "arch/arm/mach-s3c64xx/Kconfig"
-endif
 
 source "arch/arm/mach-s5p64x0/Kconfig"
 
@@ -1372,6 +1349,15 @@ config ARM_ERRATA_798181
 	  which sends an IPI to the CPUs that are running the same ASID
 	  as the one being invalidated.
 
+config ARM_ERRATA_773022
+	bool "ARM errata: incorrect instructions may be executed from loop buffer"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 773022 Cortex-A15
+	  (up to r0p4) erratum. In certain rare sequences of code, the
+	  loop buffer may deliver incorrect instructions. This
+	  workaround disables the loop buffer to avoid the erratum.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
@@ -1420,12 +1406,6 @@ config PCI_NANOENGINE
 config PCI_SYSCALL
 	def_bool PCI
 
-# Select the host bridge type
-config PCI_HOST_VIA82C505
-	bool
-	depends on PCI && ARCH_SHARK
-	default y
-
 config PCI_HOST_ITE8152
 	bool
 	depends on PCI && MACH_ARMCORE
@@ -1584,23 +1564,13 @@ config ARM_PSCI
 	  0022A ("Power State Coordination Interface System Software on
 	  ARM processors").
 
-config LOCAL_TIMERS
-	bool "Use local timer interrupts"
-	depends on SMP
-	default y
-	help
-	  Enable support for local timers on SMP platforms, rather then the
-	  legacy IPI broadcast method.  Local timers allows the system
-	  accounting to be spread across the timer interval, preventing a
-	  "thundering herd" at every timer tick.
-
 # The GPIO number here must be sorted by descending number. In case of
 # a multiplatform kernel, we just want the highest value required by the
 # selected platforms.
 config ARCH_NR_GPIO
 	int
 	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
-	default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5
+	default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || SOC_DRA7XX
 	default 392 if ARCH_U8500
 	default 352 if ARCH_VT8500
 	default 288 if ARCH_SUNXI
@@ -1613,13 +1583,50 @@ config ARCH_NR_GPIO
 
 source kernel/Kconfig.preempt
 
-config HZ
+config HZ_FIXED
 	int
 	default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \
 		ARCH_S5PV210 || ARCH_EXYNOS4
 	default AT91_TIMER_HZ if ARCH_AT91
 	default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
-	default 100
+	default 0
+
+choice
+	depends on HZ_FIXED = 0
+	prompt "Timer frequency"
+
+config HZ_100
+	bool "100 Hz"
+
+config HZ_200
+	bool "200 Hz"
+
+config HZ_250
+	bool "250 Hz"
+
+config HZ_300
+	bool "300 Hz"
+
+config HZ_500
+	bool "500 Hz"
+
+config HZ_1000
+	bool "1000 Hz"
+
+endchoice
+
+config HZ
+	int
+	default HZ_FIXED if HZ_FIXED != 0
+	default 100 if HZ_100
+	default 200 if HZ_200
+	default 250 if HZ_250
+	default 300 if HZ_300
+	default 500 if HZ_500
+	default 1000
+
+config SCHED_HRTICK
+	def_bool HIGH_RES_TIMERS
 
 config SCHED_HRTICK
 	def_bool HIGH_RES_TIMERS
@@ -1756,6 +1763,9 @@ config HAVE_ARCH_TRANSPARENT_HUGEPAGE
        def_bool y
        depends on ARM_LPAE
 
+config ARCH_WANT_GENERAL_HUGETLB
+	def_bool y
+
 source "mm/Kconfig"
 
 config FORCE_MAX_ZONEORDER
@@ -2064,8 +2074,7 @@ config KEXEC
 
 	  It is an ongoing process to be certain the hardware in a machine
 	  is properly shutdown, so do not be surprised if this code does not
-	  initially work for you.  It may help to enable device hotplugging
-	  support.
+	  initially work for you.
 
 config ATAGS_PROC
 	bool "Export atags in procfs"
@@ -2175,6 +2184,12 @@ config NEON
 	  Say Y to include support code for NEON, the ARMv7 Advanced SIMD
 	  Extension.
 
+config KERNEL_MODE_NEON
+	bool "Support for NEON in kernel mode"
+	depends on NEON && AEABI
+	help
+	  Say Y to include support for NEON in kernel mode.
+
 endmenu
 
 menu "Userspace binary formats"
@@ -2199,7 +2214,7 @@ source "kernel/power/Kconfig"
 
 config ARCH_SUSPEND_POSSIBLE
 	depends on !ARCH_S5PC100
-	depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \
+	depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \
 		CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK
 	def_bool y
 
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 583f4a0..d597c6b 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -92,6 +92,7 @@ choice
 	config DEBUG_BCM2835
 		bool "Kernel low-level debugging on BCM2835 PL011 UART"
 		depends on ARCH_BCM2835
+		select DEBUG_UART_PL01X
 
 	config DEBUG_CLPS711X_UART1
 		bool "Kernel low-level debugging messages via UART1"
@@ -110,6 +111,7 @@ choice
 	config DEBUG_CNS3XXX
 		bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx"
 		depends on ARCH_CNS3XXX
+		select DEBUG_UART_PL01X
 		help
 		  Say Y here if you want the debug print routines to direct
                   their output to the CNS3xxx UART0.
@@ -117,6 +119,7 @@ choice
 	config DEBUG_DAVINCI_DA8XX_UART1
 		bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
 		depends on ARCH_DAVINCI_DA8XX
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART1 serial port on DaVinci DA8XX devices.
@@ -124,6 +127,7 @@ choice
 	config DEBUG_DAVINCI_DA8XX_UART2
 		bool "Kernel low-level debugging on DaVinci DA8XX using UART2"
 		depends on ARCH_DAVINCI_DA8XX
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART2 serial port on DaVinci DA8XX devices.
@@ -131,6 +135,7 @@ choice
 	config DEBUG_DAVINCI_DMx_UART0
 		bool "Kernel low-level debugging on DaVinci DMx using UART0"
 		depends on ARCH_DAVINCI_DMx
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART0 serial port on DaVinci DMx devices.
@@ -138,6 +143,7 @@ choice
 	config DEBUG_DAVINCI_TNETV107X_UART1
 		bool "Kernel low-level debugging on DaVinci TNETV107x using UART1"
 		depends on ARCH_DAVINCI_TNETV107X
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART1 serial port on DaVinci TNETV107X
@@ -174,9 +180,26 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the 8250 at PCI COM1.
 
+	config DEBUG_HI3620_UART
+		bool "Hisilicon HI3620 Debug UART"
+		depends on ARCH_HI3xxx
+		select DEBUG_UART_PL01X
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on HI3620 UART.
+
+	config DEBUG_HI3716_UART
+		bool "Hisilicon Hi3716 Debug UART"
+		depends on ARCH_HI3xxx
+		select DEBUG_UART_PL01X
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on HI3716 UART.
+
 	config DEBUG_HIGHBANK_UART
 		bool "Kernel low-level debugging messages via Highbank UART"
 		depends on ARCH_HIGHBANK
+		select DEBUG_UART_PL01X
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the UART on Highbank based devices.
@@ -191,6 +214,7 @@ choice
 	config DEBUG_IMX23_UART
 		bool "i.MX23 Debug UART"
 		depends on SOC_IMX23
+		select DEBUG_UART_PL01X
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX23.
@@ -212,6 +236,7 @@ choice
 	config DEBUG_IMX28_UART
 		bool "i.MX28 Debug UART"
 		depends on SOC_IMX28
+		select DEBUG_UART_PL01X
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX28.
@@ -261,6 +286,7 @@ choice
 	config DEBUG_KEYSTONE_UART0
 		bool "Kernel low-level debugging on KEYSTONE2 using UART0"
 		depends on ARCH_KEYSTONE
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART0 serial port on KEYSTONE2 devices.
@@ -268,6 +294,7 @@ choice
 	config DEBUG_KEYSTONE_UART1
 		bool "Kernel low-level debugging on KEYSTONE2 using UART1"
 		depends on ARCH_KEYSTONE
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART1 serial port on KEYSTONE2 devices.
@@ -275,6 +302,7 @@ choice
 	config DEBUG_MMP_UART2
 		bool "Kernel low-level debugging message via MMP UART2"
 		depends on ARCH_MMP
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on MMP UART2.
@@ -282,6 +310,7 @@ choice
 	config DEBUG_MMP_UART3
 		bool "Kernel low-level debugging message via MMP UART3"
 		depends on ARCH_MMP
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on MMP UART3.
@@ -326,6 +355,7 @@ choice
 	config DEBUG_MVEBU_UART
 		bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)"
 		depends on ARCH_MVEBU
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on MVEBU based platforms.
@@ -344,6 +374,7 @@ choice
 	config DEBUG_MVEBU_UART_ALTERNATE
 		bool "Kernel low-level debugging messages via MVEBU UART (new bootloaders)"
 		depends on ARCH_MVEBU
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on MVEBU based platforms.
@@ -355,9 +386,17 @@ choice
 		  when u-boot hands over to the kernel, the system
 		  silently crashes, with no serial output at all.
 
+	config DEBUG_VF_UART
+		bool "Vybrid UART"
+		depends on SOC_VF610
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Vybrid based platforms.
+
 	config DEBUG_NOMADIK_UART
 		bool "Kernel low-level debugging messages via NOMADIK UART"
 		depends on ARCH_NOMADIK
+		select DEBUG_UART_PL01X
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on NOMADIK based platforms.
@@ -365,6 +404,7 @@ choice
 	config DEBUG_NSPIRE_CLASSIC_UART
 		bool "Kernel low-level debugging via TI-NSPIRE 8250 UART"
 		depends on ARCH_NSPIRE
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on TI-NSPIRE classic models.
@@ -372,20 +412,82 @@ choice
 	config DEBUG_NSPIRE_CX_UART
 		bool "Kernel low-level debugging via TI-NSPIRE PL011 UART"
 		depends on ARCH_NSPIRE
+		select DEBUG_UART_PL01X
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on TI-NSPIRE CX models.
 
-	config DEBUG_OMAP2PLUS_UART
-		bool "Kernel low-level debugging messages via OMAP2PLUS UART"
+	config DEBUG_OMAP2UART1
+		bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)"
 		depends on ARCH_OMAP2PLUS
+		select DEBUG_OMAP2PLUS_UART
 		help
-		  Say Y here if you want kernel low-level debugging support
-		  on OMAP2PLUS based platforms.
+		  This covers at least h4, 2430sdp, 3430sdp, 3630sdp,
+		  omap3 torpedo and 3530 lv som.
+
+	config DEBUG_OMAP2UART2
+		bool "Kernel low-level debugging messages via OMAP2/3/4 UART2"
+		depends on ARCH_OMAP2PLUS
+		select DEBUG_OMAP2PLUS_UART
+
+	config DEBUG_OMAP2UART3
+		bool "Kernel low-level debugging messages via OMAP2 UART3 (n8x0)"
+		depends on ARCH_OMAP2PLUS
+		select DEBUG_OMAP2PLUS_UART
+
+	config DEBUG_OMAP3UART3
+		bool "Kernel low-level debugging messages via OMAP3 UART3 (most omap3 boards)"
+		depends on ARCH_OMAP2PLUS
+		select DEBUG_OMAP2PLUS_UART
+		help
+		  This covers at least cm_t3x, beagle, crane, devkit8000,
+		  igep00x0, ldp, n900, n9(50), pandora, overo, touchbook,
+		  and 3517evm.
+
+	config DEBUG_OMAP4UART3
+		bool "Kernel low-level debugging messages via OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)"
+		depends on ARCH_OMAP2PLUS
+		select DEBUG_OMAP2PLUS_UART
+
+	config DEBUG_OMAP3UART4
+		bool "Kernel low-level debugging messages via OMAP36XX UART4"
+		depends on ARCH_OMAP2PLUS
+		select DEBUG_OMAP2PLUS_UART
+
+	config DEBUG_OMAP4UART4
+		bool "Kernel low-level debugging messages via OMAP4/5 UART4"
+		depends on ARCH_OMAP2PLUS
+		select DEBUG_OMAP2PLUS_UART
+
+	config DEBUG_TI81XXUART1
+		bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)"
+		depends on ARCH_OMAP2PLUS
+		select DEBUG_OMAP2PLUS_UART
+
+	config DEBUG_TI81XXUART2
+		bool "Kernel low-level debugging messages via TI81XX UART2"
+		depends on ARCH_OMAP2PLUS
+		select DEBUG_OMAP2PLUS_UART
+
+	config DEBUG_TI81XXUART3
+		bool "Kernel low-level debugging messages via TI81XX UART3 (ti8168evm)"
+		depends on ARCH_OMAP2PLUS
+		select DEBUG_OMAP2PLUS_UART
+
+	config DEBUG_AM33XXUART1
+		bool "Kernel low-level debugging messages via AM33XX UART1"
+		depends on ARCH_OMAP2PLUS
+		select DEBUG_OMAP2PLUS_UART
+
+	config DEBUG_ZOOM_UART
+		bool "Kernel low-level debugging messages via Zoom2/3 UART"
+		depends on ARCH_OMAP2PLUS
+		select DEBUG_OMAP2PLUS_UART
 
 	config DEBUG_PICOXCELL_UART
 		depends on ARCH_PICOXCELL
 		bool "Use PicoXcell UART for low-level debug"
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on PicoXcell based platforms.
@@ -393,6 +495,7 @@ choice
 	config DEBUG_PXA_UART1
 		depends on ARCH_PXA
 		bool "Use PXA UART1 for low-level debug"
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on PXA UART1.
@@ -400,6 +503,7 @@ choice
 	config DEBUG_REALVIEW_STD_PORT
 		bool "RealView Default UART"
 		depends on ARCH_REALVIEW
+		select DEBUG_UART_PL01X
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the serial port on RealView EB, PB11MP, PBA8
@@ -408,14 +512,64 @@ choice
 	config DEBUG_REALVIEW_PB1176_PORT
 		bool "RealView PB1176 UART"
 		depends on MACH_REALVIEW_PB1176
+		select DEBUG_UART_PL01X
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the standard serial port on the RealView
 		  PB1176 platform.
 
-	config DEBUG_ROCKCHIP_UART
-		bool "Kernel low-level debugging messages via Rockchip UART"
+	config DEBUG_RK29_UART0
+		bool "Kernel low-level debugging messages via Rockchip RK29 UART0"
+		depends on ARCH_ROCKCHIP
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Rockchip based platforms.
+
+	config DEBUG_RK29_UART1
+		bool "Kernel low-level debugging messages via Rockchip RK29 UART1"
+		depends on ARCH_ROCKCHIP
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Rockchip based platforms.
+
+	config DEBUG_RK29_UART2
+		bool "Kernel low-level debugging messages via Rockchip RK29 UART2"
 		depends on ARCH_ROCKCHIP
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Rockchip based platforms.
+
+	config DEBUG_RK3X_UART0
+		bool "Kernel low-level debugging messages via Rockchip RK3X UART0"
+		depends on ARCH_ROCKCHIP
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Rockchip based platforms.
+
+	config DEBUG_RK3X_UART1
+		bool "Kernel low-level debugging messages via Rockchip RK3X UART1"
+		depends on ARCH_ROCKCHIP
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Rockchip based platforms.
+
+	config DEBUG_RK3X_UART2
+		bool "Kernel low-level debugging messages via Rockchip RK3X UART2"
+		depends on ARCH_ROCKCHIP
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Rockchip based platforms.
+
+	config DEBUG_RK3X_UART3
+		bool "Kernel low-level debugging messages via Rockchip RK3X UART3"
+		depends on ARCH_ROCKCHIP
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on Rockchip based platforms.
@@ -471,6 +625,7 @@ choice
 	config DEBUG_SOCFPGA_UART
 		depends on ARCH_SOCFPGA
 		bool "Use SOCFPGA UART for low-level debug"
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on SOCFPGA based platforms.
@@ -478,6 +633,7 @@ choice
 	config DEBUG_SUNXI_UART0
 		bool "Kernel low-level debugging messages via sunXi UART0"
 		depends on ARCH_SUNXI
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on Allwinner A1X based platforms on the UART0.
@@ -485,13 +641,59 @@ choice
 	config DEBUG_SUNXI_UART1
 		bool "Kernel low-level debugging messages via sunXi UART1"
 		depends on ARCH_SUNXI
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on Allwinner A1X based platforms on the UART1.
 
-	config DEBUG_TEGRA_UART
+	config TEGRA_DEBUG_UART_AUTO_ODMDATA
+		bool "Kernel low-level debugging messages via Tegra UART via ODMDATA"
+		depends on ARCH_TEGRA
+		select DEBUG_TEGRA_UART
+		help
+		  Automatically determines which UART to use for low-level
+		  debug based on the ODMDATA value. This value is part of
+		  the BCT, and is written to the boot memory device using
+		  nvflash, or other flashing tool.  When bits 19:18 are 3,
+		  then bits 17:15 indicate which UART to use; 0/1/2/3/4
+		  are UART A/B/C/D/E.
+
+	config TEGRA_DEBUG_UARTA
+		bool "Kernel low-level debugging messages via Tegra UART A"
+		depends on ARCH_TEGRA
+		select DEBUG_TEGRA_UART
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Tegra based platforms.
+
+	config TEGRA_DEBUG_UARTB
+		bool "Kernel low-level debugging messages via Tegra UART B"
+		depends on ARCH_TEGRA
+		select DEBUG_TEGRA_UART
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Tegra based platforms.
+
+	config TEGRA_DEBUG_UARTC
+		bool "Kernel low-level debugging messages via Tegra UART C"
+		depends on ARCH_TEGRA
+		select DEBUG_TEGRA_UART
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Tegra based platforms.
+
+	config TEGRA_DEBUG_UARTD
+		bool "Kernel low-level debugging messages via Tegra UART D"
 		depends on ARCH_TEGRA
-		bool "Use Tegra UART for low-level debug"
+		select DEBUG_TEGRA_UART
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Tegra based platforms.
+
+	config TEGRA_DEBUG_UARTE
+		bool "Kernel low-level debugging messages via Tegra UART E"
+		depends on ARCH_TEGRA
+		select DEBUG_TEGRA_UART
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on Tegra based platforms.
@@ -510,19 +712,32 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the uart1 port on SiRFmarco devices.
 
-	config DEBUG_STI_UART
+	config STIH41X_DEBUG_ASC2
+		bool "Use StiH415/416 ASC2 UART for low-level debug"
 		depends on ARCH_STI
-		bool "Use StiH415/416 ASC for low-level debug"
+		select DEBUG_STI_UART
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on StiH415/416 based platforms like B2000, B2020.
-		  It support UART2 and SBC_UART1.
+		  on STiH415/416 based platforms like b2000, which has
+		  default UART wired up to ASC2.
+
+		  If unsure, say N.
+
+	config STIH41X_DEBUG_SBC_ASC1
+		bool "Use StiH415/416 SBC ASC1 UART for low-level debug"
+		depends on ARCH_STI
+		select DEBUG_STI_UART
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STiH415/416 based platforms like b2020. which has
+		  default UART wired up to SBC ASC1.
 
 		  If unsure, say N.
 
 	config DEBUG_U300_UART
 		bool "Kernel low-level debugging messages via U300 UART0"
 		depends on ARCH_U300
+		select DEBUG_UART_PL01X
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the uart port on U300 devices.
@@ -548,6 +763,7 @@ choice
 	config DEBUG_VEXPRESS_UART0_CA9
 		bool "Use PL011 UART0 at 0x10009000 (V2P-CA9 core tile)"
 		depends on ARCH_VEXPRESS
+		select DEBUG_UART_PL01X
 		help
 		  This option selects UART0 at 0x10009000. Except for custom models,
 		  this applies only to the V2P-CA9 tile.
@@ -555,6 +771,7 @@ choice
 	config DEBUG_VEXPRESS_UART0_RS1
 		bool "Use PL011 UART0 at 0x1c090000 (RS1 complaint tiles)"
 		depends on ARCH_VEXPRESS
+		select DEBUG_UART_PL01X
 		help
 		  This option selects UART0 at 0x1c090000. This applies to most
 		  of the tiles using the RS1 memory map, including all new A-class
@@ -563,6 +780,7 @@ choice
 	config DEBUG_VEXPRESS_UART0_CRX
 		bool "Use PL011 UART0 at 0xb0090000 (Cortex-R compliant tiles)"
 		depends on ARCH_VEXPRESS && !MMU
+		select DEBUG_UART_PL01X
 		help
 		  This option selects UART0 at 0xb0090000. This is appropriate for
 		  Cortex-R series tiles and SMMs, such as Cortex-R5 and Cortex-R7
@@ -579,7 +797,7 @@ choice
 		depends on !ARCH_MULTIPLATFORM
 		help
 		  Say Y here if your platform doesn't provide a UART option
-		  below. This relies on your platform choosing the right UART
+		  above. This relies on your platform choosing the right UART
 		  definition internally in order for low-level debugging to
 		  work.
 
@@ -610,11 +828,41 @@ choice
 		  For more details about semihosting, please see
 		  chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.
 
+	config DEBUG_LL_UART_8250
+		bool "Kernel low-level debugging via 8250 UART"
+		help
+		  Say Y here if you wish the debug print routes to direct
+		  their output to an 8250 UART.  You can use this option
+		  to provide the parameters for the 8250 UART rather than
+		  selecting one of the platform specific options above if
+		  you know the parameters for the port.
+
+		  This option is preferred over the platform specific
+		  options; the platform specific options are deprecated
+		  and will be soon removed.
+
+	config DEBUG_LL_UART_PL01X
+		bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART"
+		help
+		  Say Y here if you wish the debug print routes to direct
+		  their output to a PL01x Primecell UART.  You can use
+		  this option to provide the parameters for the UART
+		  rather than selecting one of the platform specific
+		  options above if you know the parameters for the port.
+
+		  This option is preferred over the platform specific
+		  options; the platform specific options are deprecated
+		  and will be soon removed.
+
 endchoice
 
 config DEBUG_EXYNOS_UART
 	bool
 
+config DEBUG_OMAP2PLUS_UART
+	bool
+	depends on ARCH_OMAP2PLUS
+
 config DEBUG_IMX_UART_PORT
 	int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \
 						DEBUG_IMX25_UART || \
@@ -631,140 +879,19 @@ config DEBUG_IMX_UART_PORT
 	  Choose UART port on which kernel low-level debug messages
 	  should be output.
 
-choice
-	prompt "Low-level debug console UART"
-	depends on DEBUG_OMAP2PLUS_UART
-
-	config DEBUG_OMAP2UART1
-		bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)"
-		help
-		  This covers at least h4, 2430sdp, 3430sdp, 3630sdp,
-		  omap3 torpedo and 3530 lv som.
-
-	config DEBUG_OMAP2UART2
-		bool "OMAP2/3/4 UART2"
-
-	config DEBUG_OMAP2UART3
-		bool "OMAP2 UART3 (n8x0)"
-
-	config DEBUG_OMAP3UART3
-		bool "OMAP3 UART3 (most omap3 boards)"
-		help
-		  This covers at least cm_t3x, beagle, crane, devkit8000,
-		  igep00x0, ldp, n900, n9(50), pandora, overo, touchbook,
-		  and 3517evm.
-
-	config DEBUG_OMAP4UART3
-		bool "OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)"
-
-	config DEBUG_OMAP3UART4
-		bool "OMAP36XX UART4"
-
-	config DEBUG_OMAP4UART4
-		bool "OMAP4/5 UART4"
-
-	config DEBUG_TI81XXUART1
-		bool "TI81XX UART1 (ti8148evm)"
-
-	config DEBUG_TI81XXUART2
-		bool "TI81XX UART2"
-
-	config DEBUG_TI81XXUART3
-		bool "TI81XX UART3 (ti8168evm)"
-
-	config DEBUG_AM33XXUART1
-		bool "AM33XX UART1"
-
-	config DEBUG_ZOOM_UART
-		bool "Zoom2/3 UART"
-endchoice
-
-choice
-	prompt "Low-level debug console UART"
-	depends on DEBUG_ROCKCHIP_UART
-
-	config DEBUG_RK29_UART0
-		bool "RK29 UART0"
-
-	config DEBUG_RK29_UART1
-		bool "RK29 UART1"
-
-	config DEBUG_RK29_UART2
-		bool "RK29 UART2"
-
-	config DEBUG_RK3X_UART0
-		bool "RK3X UART0"
-
-	config DEBUG_RK3X_UART1
-		bool "RK3X UART1"
-
-	config DEBUG_RK3X_UART2
-		bool "RK3X UART2"
-
-	config DEBUG_RK3X_UART3
-		bool "RK3X UART3"
-endchoice
-
-choice
-	prompt "Low-level debug console UART"
-	depends on DEBUG_LL && DEBUG_TEGRA_UART
-
-	config TEGRA_DEBUG_UART_AUTO_ODMDATA
-	bool "Via ODMDATA"
-	help
-	  Automatically determines which UART to use for low-level debug based
-	  on the ODMDATA value. This value is part of the BCT, and is written
-	  to the boot memory device using nvflash, or other flashing tool.
-	  When bits 19:18 are 3, then bits 17:15 indicate which UART to use;
-	  0/1/2/3/4 are UART A/B/C/D/E.
-
-	config TEGRA_DEBUG_UARTA
-		bool "UART A"
-
-	config TEGRA_DEBUG_UARTB
-		bool "UART B"
-
-	config TEGRA_DEBUG_UARTC
-		bool "UART C"
-
-	config TEGRA_DEBUG_UARTD
-		bool "UART D"
-
-	config TEGRA_DEBUG_UARTE
-		bool "UART E"
-
-endchoice
-
-choice
-	prompt "Low-level debug console UART"
-	depends on DEBUG_LL && DEBUG_STI_UART
-
-	config STIH41X_DEBUG_ASC2
-		bool "ASC2 UART"
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on STiH415/416 based platforms like b2000, which has
-		  default UART wired up to ASC2.
-
-		  If unsure, say N.
-
-	config STIH41X_DEBUG_SBC_ASC1
-		bool "SBC ASC1 UART"
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on STiH415/416 based platforms like b2020. which has
-		  default UART wired up to SBC ASC1.
-
-		  If unsure, say N.
+config DEBUG_TEGRA_UART
+	bool
+	depends on ARCH_TEGRA
 
-endchoice
+config DEBUG_STI_UART
+	bool
+	depends on ARCH_STI
 
 config DEBUG_LL_INCLUDE
 	string
-	default "debug/bcm2835.S" if DEBUG_BCM2835
-	default "debug/cns3xxx.S" if DEBUG_CNS3XXX
+	default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
+	default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X
 	default "debug/exynos.S" if DEBUG_EXYNOS_UART
-	default "debug/highbank.S" if DEBUG_HIGHBANK_UART
 	default "debug/icedcc.S" if DEBUG_ICEDCC
 	default "debug/imx.S" if DEBUG_IMX1_UART || \
 				 DEBUG_IMX25_UART || \
@@ -775,38 +902,176 @@ config DEBUG_LL_INCLUDE
 				 DEBUG_IMX53_UART ||\
 				 DEBUG_IMX6Q_UART || \
 				 DEBUG_IMX6SL_UART
-	default "debug/keystone.S" if DEBUG_KEYSTONE_UART0 || \
-				      DEBUG_KEYSTONE_UART1
-	default "debug/mvebu.S" if DEBUG_MVEBU_UART || \
-				   DEBUG_MVEBU_UART_ALTERNATE
-	default "debug/mxs.S" if DEBUG_IMX23_UART || DEBUG_IMX28_UART
-	default "debug/nomadik.S" if DEBUG_NOMADIK_UART
-	default "debug/nspire.S" if 	DEBUG_NSPIRE_CX_UART || \
-					DEBUG_NSPIRE_CLASSIC_UART
+	default "debug/msm.S" if DEBUG_MSM_UART1 || \
+				 DEBUG_MSM_UART2 || \
+				 DEBUG_MSM_UART3 || \
+				 DEBUG_MSM8660_UART || \
+				 DEBUG_MSM8960_UART
 	default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
-	default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
-	default "debug/pxa.S" if DEBUG_PXA_UART1 || DEBUG_MMP_UART2 || \
-				 DEBUG_MMP_UART3
-	default "debug/rockchip.S" if DEBUG_ROCKCHIP_UART
 	default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
-	default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
 	default "debug/sti.S" if DEBUG_STI_UART
-	default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1
 	default "debug/tegra.S" if DEBUG_TEGRA_UART
-	default "debug/u300.S" if DEBUG_U300_UART
 	default "debug/ux500.S" if DEBUG_UX500_UART
-	default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
-		DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1 || \
-		DEBUG_VEXPRESS_UART0_CRX
+	default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT
+	default "debug/vf.S" if DEBUG_VF_UART
 	default "debug/vt8500.S" if DEBUG_VT8500_UART0
 	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
 	default "mach/debug-macro.S"
 
+# Compatibility options for PL01x
+config DEBUG_UART_PL01X
+	def_bool ARCH_EP93XX || \
+		ARCH_INTEGRATOR || \
+		ARCH_SPEAR3XX || \
+		ARCH_SPEAR6XX || \
+		ARCH_SPEAR13XX || \
+		ARCH_VERSATILE
+
+# Compatibility options for 8250
+config DEBUG_UART_8250
+	def_bool ARCH_DOVE || ARCH_EBSA110 || \
+		(FOOTBRIDGE && !DEBUG_DC21285_PORT) || \
+		ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \
+		ARCH_IOP33X || ARCH_IXP4XX || ARCH_KIRKWOOD || \
+		ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
+
+config DEBUG_UART_PHYS
+	hex "Physical base address of debug UART"
+	default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0
+	default 0x01c28000 if DEBUG_SUNXI_UART0
+	default 0x01c28400 if DEBUG_SUNXI_UART1
+	default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1
+	default 0x01d0d000 if DEBUG_DAVINCI_DA8XX_UART2
+	default 0x02530c00 if DEBUG_KEYSTONE_UART0
+	default 0x02531000 if DEBUG_KEYSTONE_UART1
+	default 0x03010fe0 if ARCH_RPC
+	default 0x08108300 if DEBUG_DAVINCI_TNETV107X_UART1
+	default 0x10009000 if DEBUG_REALVIEW_STD_PORT || DEBUG_CNS3XXX || \
+				DEBUG_VEXPRESS_UART0_CA9
+	default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
+	default 0x10124000 if DEBUG_RK3X_UART0
+	default 0x10126000 if DEBUG_RK3X_UART1
+	default 0x101f1000 if ARCH_VERSATILE
+	default 0x101fb000 if DEBUG_NOMADIK_UART
+	default 0x16000000 if ARCH_INTEGRATOR
+	default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
+	default 0x20060000 if DEBUG_RK29_UART0
+	default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
+	default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
+	default 0x20201000 if DEBUG_BCM2835
+	default 0x40090000 if ARCH_LPC32XX
+	default 0x40100000 if DEBUG_PXA_UART1
+	default 0x42000000 if ARCH_GEMINI
+	default 0x7c0003f8 if FOOTBRIDGE
+	default 0x80230000 if DEBUG_PICOXCELL_UART
+	default 0x80070000 if DEBUG_IMX23_UART
+	default 0x80074000 if DEBUG_IMX28_UART
+	default 0x808c0000 if ARCH_EP93XX
+	default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
+	default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
+	default 0xc0013000 if DEBUG_U300_UART
+	default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
+	default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
+	default 0xd0000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
+	default 0xd0012000 if DEBUG_MVEBU_UART
+	default 0xd4017000 if DEBUG_MMP_UART2
+	default 0xd4018000 if DEBUG_MMP_UART3
+	default 0xe0000000 if ARCH_SPEAR13XX
+	default 0xf0000be0 if ARCH_EBSA110
+	default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE
+	default 0xf1012000 if ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \
+				ARCH_ORION5X
+	default 0xf8b00000 if DEBUG_HI3716_UART
+	default 0xfcb00000 if DEBUG_HI3620_UART
+	default 0xfe800000 if ARCH_IOP32X
+	default 0xffc02000 if DEBUG_SOCFPGA_UART
+	default 0xffd82340 if ARCH_IOP13XX
+	default 0xfff36000 if DEBUG_HIGHBANK_UART
+	default 0xfffff700 if ARCH_IOP33X
+	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
+		DEBUG_UART_8250 || DEBUG_UART_PL01X
+
+config DEBUG_UART_VIRT
+	hex "Virtual base address of debug UART"
+	default 0xe0010fe0 if ARCH_RPC
+	default 0xf0000be0 if ARCH_EBSA110
+	default 0xf0009000 if DEBUG_CNS3XXX
+	default 0xf01fb000 if DEBUG_NOMADIK_UART
+	default 0xf0201000 if DEBUG_BCM2835
+	default 0xf11f1000 if ARCH_VERSATILE
+	default 0xf1600000 if ARCH_INTEGRATOR
+	default 0xf1c28000 if DEBUG_SUNXI_UART0
+	default 0xf1c28400 if DEBUG_SUNXI_UART1
+	default 0xf2100000 if DEBUG_PXA_UART1
+	default 0xf4090000 if ARCH_LPC32XX
+	default 0xf4200000 if ARCH_GEMINI
+	default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
+	default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
+	default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
+	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
+	default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
+	default 0xfd000000 if ARCH_SPEAR13XX
+	default 0xfd012000 if ARCH_MV78XX0
+	default 0xfde12000 if ARCH_DOVE
+	default 0xfe012000 if ARCH_ORION5X
+	default 0xfe017000 if DEBUG_MMP_UART2
+	default 0xfe018000 if DEBUG_MMP_UART3
+	default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
+	default 0xfe230000 if DEBUG_PICOXCELL_UART
+	default 0xfe800000 if ARCH_IOP32X
+	default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HI3716_UART
+	default 0xfeb24000 if DEBUG_RK3X_UART0
+	default 0xfeb26000 if DEBUG_RK3X_UART1
+	default 0xfeb30c00 if DEBUG_KEYSTONE_UART0
+	default 0xfeb31000 if DEBUG_KEYSTONE_UART1
+	default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE
+	default 0xfed60000 if DEBUG_RK29_UART0
+	default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
+	default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
+	default 0xfec02000 if DEBUG_SOCFPGA_UART
+	default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
+	default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
+	default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2
+	default 0xfed12000 if ARCH_KIRKWOOD
+	default 0xfedc0000 if ARCH_EP93XX
+	default 0xfee003f8 if FOOTBRIDGE
+	default 0xfee08300 if DEBUG_DAVINCI_TNETV107X_UART1
+	default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
+	default 0xfef36000 if DEBUG_HIGHBANK_UART
+	default 0xfee82340 if ARCH_IOP13XX
+	default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
+	default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
+	default 0xfefff700 if ARCH_IOP33X
+	default 0xff003000 if DEBUG_U300_UART
+	default DEBUG_UART_PHYS if !MMU
+	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
+		DEBUG_UART_8250 || DEBUG_UART_PL01X
+
+config DEBUG_UART_8250_SHIFT
+	int "Register offset shift for the 8250 debug UART"
+	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+	default 0 if FOOTBRIDGE || ARCH_IOP32X
+	default 2
+
+config DEBUG_UART_8250_WORD
+	bool "Use 32-bit accesses for 8250 UART"
+	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+	depends on DEBUG_UART_8250_SHIFT >= 2
+	default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \
+		ARCH_KEYSTONE || \
+		DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
+		DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_DAVINCI_TNETV107X_UART1
+
+config DEBUG_UART_8250_FLOW_CONTROL
+	bool "Enable flow control for 8250 UART"
+	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+	default y if ARCH_EBSA110 || FOOTBRIDGE || ARCH_GEMINI || ARCH_RPC
+
 config DEBUG_UNCOMPRESS
 	bool
-	depends on ARCH_MULTIPLATFORM
+	depends on ARCH_MULTIPLATFORM || ARCH_MSM
 	default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
-		     !DEBUG_TEGRA_UART
+		     (!DEBUG_TEGRA_UART || !ZBOOT_ROM)
 	help
 	  This option influences the normal decompressor output for
 	  multiplatform kernels.  Normally, multiplatform kernels disable
@@ -820,7 +1085,7 @@ config DEBUG_UNCOMPRESS
 
 config UNCOMPRESS_INCLUDE
 	string
-	default "debug/uncompress.h" if ARCH_MULTIPLATFORM
+	default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM
 	default "mach/uncompress.h"
 
 config EARLY_PRINTK
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 6fd2cea..8b66713 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -188,8 +188,8 @@ machine-$(CONFIG_ARCH_S5P64X0)		+= s5p64x0
 machine-$(CONFIG_ARCH_S5PC100)		+= s5pc100
 machine-$(CONFIG_ARCH_S5PV210)		+= s5pv210
 machine-$(CONFIG_ARCH_SA1100)		+= sa1100
-machine-$(CONFIG_ARCH_SHARK)		+= shark
 machine-$(CONFIG_ARCH_SHMOBILE) 	+= shmobile
+machine-$(CONFIG_ARCH_SHMOBILE_MULTI) 	+= shmobile
 machine-$(CONFIG_ARCH_SIRF)		+= prima2
 machine-$(CONFIG_ARCH_SOCFPGA)		+= socfpga
 machine-$(CONFIG_ARCH_STI)		+= sti
@@ -295,10 +295,15 @@ archprepare:
 # Convert bzImage to zImage
 bzImage: zImage
 
-zImage Image xipImage bootpImage uImage: vmlinux
+BOOT_TARGETS	= zImage Image xipImage bootpImage uImage
+INSTALL_TARGETS	= zinstall uinstall install
+
+PHONY += bzImage $(BOOT_TARGETS) $(INSTALL_TARGETS)
+
+$(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
-zinstall uinstall install: vmlinux
+$(INSTALL_TARGETS):
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
 
 %.dtb: | scripts
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 84aa2ca..ec2f806 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -95,24 +95,24 @@ initrd:
 	@test "$(INITRD)" != "" || \
 	(echo You must specify INITRD; exit -1)
 
-install: $(obj)/Image
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+install:
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
 	$(obj)/Image System.map "$(INSTALL_PATH)"
 
-zinstall: $(obj)/zImage
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+zinstall:
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
 	$(obj)/zImage System.map "$(INSTALL_PATH)"
 
-uinstall: $(obj)/uImage
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+uinstall:
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
 	$(obj)/uImage System.map "$(INSTALL_PATH)"
 
 zi:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
 	$(obj)/zImage System.map "$(INSTALL_PATH)"
 
 i:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
 	$(obj)/Image System.map "$(INSTALL_PATH)"
 
 subdir-	    := bootp compressed dts
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 7ac1610..e7190bb 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -44,10 +44,6 @@ ifeq ($(CONFIG_ARCH_ACORN),y)
 OBJS		+= ll_char_wr.o font.o
 endif
 
-ifeq ($(CONFIG_ARCH_SHARK),y)
-OBJS		+= head-shark.o ofw-shark.o
-endif
-
 ifeq ($(CONFIG_ARCH_SA1100),y)
 OBJS		+= head-sa1100.o
 endif
diff --git a/arch/arm/boot/compressed/head-shark.S b/arch/arm/boot/compressed/head-shark.S
deleted file mode 100644
index 92b5689..0000000
--- a/arch/arm/boot/compressed/head-shark.S
+++ /dev/null
@@ -1,140 +0,0 @@
-/* The head-file for the Shark
- * by Alexander Schulz
- *
- * Does the following:
- * - get the memory layout from firmware. This can only be done as long as the mmu
- *   is still on.
- * - switch the mmu off, so we have physical addresses
- * - copy the kernel to 0x08508000. This is done to have a fixed address where the
- *   C-parts (misc.c) are executed. This address must be known at compile-time,
- *   but the load-address of the kernel depends on how much memory is installed.
- * - Jump to this location.
- * - Set r8 with 0, r7 with the architecture ID for head.S
- */
-
-#include <linux/linkage.h>
-
-#include <asm/assembler.h>
-	
-		.section	".start", "ax"
-
-		.arch armv4
-		b	__beginning
-	
-__ofw_data:	.long	0				@ the number of memory blocks
-		.space  128				@ (startaddr,size) ...
-		.space  128				@ bootargs
-		.align
-
-__beginning:	mov	r4, r0				@ save the entry to the firmware
-
-		mov	r0, #0xC0			@ disable irq and fiq
-		mov	r1, r0
-		mrs	r3, cpsr
-		bic	r2, r3, r0
-		eor	r2, r2, r1
-		msr	cpsr_c, r2
-
-		mov	r0, r4				@ get the Memory layout from firmware
-		adr	r1, __ofw_data
-		add	r2, r1, #4
-		mov	lr, pc
-		b	ofw_init
-		mov	r1, #0
-
-		adr	r2, __mmu_off			@ calculate physical address
-		sub	r2, r2, #0xf0000000		@ openprom maps us at f000 virt, 0e50 phys
-		adr	r0, __ofw_data
-		ldr	r0, [r0, #4]
-		add	r2, r2, r0
-		add	r2, r2, #0x00500000
-
-		mrc	p15, 0, r3, c1, c0
-		bic	r3, r3, #0xC			@ Write Buffer and DCache
-		bic	r3, r3, #0x1000			@ ICache
-		mcr	p15, 0, r3, c1, c0		@ disabled
-
-		mov	r0, #0
-		mcr	p15, 0, r0, c7, c7		@ flush I,D caches on v4
-		mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
-		mcr	p15, 0, r0, c8, c7		@ flush I,D TLBs on v4
-
-		bic	r3, r3, #0x1			@ MMU
-		mcr	p15, 0, r3, c1, c0		@ disabled
-
-		mov	pc, r2
-
-__copy_target:	.long	0x08507FFC
-__copy_end:	.long	0x08607FFC
-		
-		.word	_start
-		.word	__bss_start
-
-		.align
-__temp_stack:	.space 128
-
-__mmu_off:
-		adr	r0, __ofw_data			@ read the 1. entry of the memory map
-		ldr	r0, [r0, #4]
-		orr	r0, r0, #0x00600000
-		sub	r0, r0, #4
-	
-		ldr	r1, __copy_end
-		ldr	r3, __copy_target
-
-/* r0 = 0x0e600000 (current end of kernelcode)
- * r3 = 0x08508000 (where it should begin)
- * r1 = 0x08608000 (end of copying area, 1MB)
- * The kernel is compressed, so 1 MB should be enough.
- * copy the kernel to the beginning of physical memory
- * We start from the highest address, so we can copy
- * from 0x08500000 to 0x08508000 if we have only 8MB
- */
-
-/* As we get more 2.6-kernels it gets more and more
- * uncomfortable to be bound to kernel images of 1MB only.
- * So we add a loop here, to be able to copy some more.
- * Alexander Schulz 2005-07-17
- */
-
-		mov	r4, #3				@ How many megabytes to copy
-
-
-__MoveCode:	sub	r4, r4, #1
-	
-__Copy:		ldr	r2, [r0], #-4
-		str	r2, [r1], #-4
-		teq	r1, r3
-		bne	__Copy
-
-		/* The firmware maps us in blocks of 1 MB, the next block is
-		   _below_ the last one. So our decrementing source pointer
-		   ist right here, but the destination pointer must be increased
-		   by 2 MB */
-		add	r1, r1, #0x00200000
-		add	r3, r3, #0x00100000
-
-		teq	r4, #0
-		bne	__MoveCode
-
-
-		/* and jump to it */
-		adr	r2, __go_on			@ where we want to jump
-		adr	r0, __ofw_data			@ read the 1. entry of the memory map
-		ldr	r0, [r0, #4]
-		sub	r2, r2, r0			@ we are mapped add 0e50 now, sub that (-0e00)
-		sub	r2, r2, #0x00500000		@ -0050
-		ldr	r0, __copy_target		@ and add 0850 8000 instead
-		add	r0, r0, #4
-		add	r2, r2, r0
-		mov	pc, r2				@ and jump there
-
-__go_on:
-		adr	sp, __temp_stack
-		add	sp, sp, #128
-		adr	r0, __ofw_data
-		mov	lr, pc
-		b	create_params
-	
-		mov	r8, #0
-		mov	r7, #15
diff --git a/arch/arm/boot/compressed/head-shmobile.S b/arch/arm/boot/compressed/head-shmobile.S
index e2d6363..e7f8092 100644
--- a/arch/arm/boot/compressed/head-shmobile.S
+++ b/arch/arm/boot/compressed/head-shmobile.S
@@ -55,12 +55,47 @@ __tmp_stack:
 __continue:
 #endif /* CONFIG_ZBOOT_ROM_MMC || CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI */
 
-	/* Set board ID necessary for boot */
-	ldr	r7, 1f				@ Set machine type register
-	mov	r8, #0				@ pass null pointer as atag
+	adr	r0, dtb_info
+	ldmia	r0, {r1, r3, r4, r5, r7}
+
+	sub	r0, r0, r1		@ calculate the delta offset
+	add	r5, r5, r0		@ _edata
+
+	ldr	lr, [r5, #0]		@ check if valid DTB is present
+	cmp	lr, r3
+	bne	0f
+
+	add	r9, r7, #31		@ rounded up to a multiple
+	bic	r9, r9, #31		@ ... of 32 bytes
+
+	add	r6, r9, r5		@ copy from _edata
+	add	r9, r9, r4		@ to MEMORY_START
+
+1:	ldmdb	r6!, {r0 - r3, r10 - r12, lr}
+	cmp	r6, r5
+	stmdb	r9!, {r0 - r3, r10 - r12, lr}
+	bhi	1b
+
+	/* Success: Zero board ID, pointer to start of memory for atag/dtb */
+	mov	r7, #0
+	mov	r8, r4
 	b	2f
 
-1 :	.long MACH_TYPE
+	.align	2
+dtb_info:
+	.word	dtb_info
+#ifndef __ARMEB__
+	.word	0xedfe0dd0		@ sig is 0xd00dfeed big endian
+#else
+	.word	0xd00dfeed
+#endif
+	.word	MEMORY_START
+	.word	_edata
+	.word	0x4000			@ maximum DTB size
+0:
+	/* Failure: Zero board ID, NULL atag/dtb */
+	mov 	r7, #0
+	mov	r8, #0			@ pass null pointer as atag
 2 :
 
 #endif /* CONFIG_ZBOOT_ROM */
diff --git a/arch/arm/boot/compressed/ofw-shark.c b/arch/arm/boot/compressed/ofw-shark.c
deleted file mode 100644
index 465c54b..0000000
--- a/arch/arm/boot/compressed/ofw-shark.c
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- * linux/arch/arm/boot/compressed/ofw-shark.c
- *
- * by Alexander Schulz
- *
- * This file is used to get some basic information
- * about the memory layout of the shark we are running
- * on. Memory is usually divided in blocks a 8 MB.
- * And bootargs are copied from OpenFirmware.
- */
-
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/setup.h>
-#include <asm/page.h>
-
-
-asmlinkage void
-create_params (unsigned long *buffer)
-{
-	/* Is there a better address? Also change in mach-shark/core.c */
-	struct tag *tag = (struct tag *) 0x08003000;
-	int j,i,m,k,nr_banks,size;
-	unsigned char *c;
-
-	k = 0;
-
-	/* Head of the taglist */
-	tag->hdr.tag  = ATAG_CORE;
-	tag->hdr.size = tag_size(tag_core);
-	tag->u.core.flags = 1;
-	tag->u.core.pagesize = PAGE_SIZE;
-	tag->u.core.rootdev = 0;
-
-	/* Build up one tagged block for each memory region */
-	size=0;
-	nr_banks=(unsigned int) buffer[0];
-	for (j=0;j<nr_banks;j++){
-		/* search the lowest address and put it into the next entry   */
-		/* not a fast sort algorithm, but there are at most 8 entries */
-		/* and this is used only once anyway                          */
-		m=0xffffffff;
-		for (i=0;i<(unsigned int) buffer[0];i++){
-			if (buffer[2*i+1]<m) {
-				m=buffer[2*i+1];
-				k=i;
-			}
-		}
-	  
-		tag = tag_next(tag);
-		tag->hdr.tag = ATAG_MEM;
-		tag->hdr.size = tag_size(tag_mem32);
-		tag->u.mem.size = buffer[2*k+2];
-		tag->u.mem.start = buffer[2*k+1];
-
-		size += buffer[2*k+2];
-
-		buffer[2*k+1]=0xffffffff;                    /* mark as copied */
-	}
-	
-	/* The command line */
-	tag = tag_next(tag);
-	tag->hdr.tag = ATAG_CMDLINE;
-	
-	c=(unsigned char *)(&buffer[34]);
-	j=0;
-	while (*c) tag->u.cmdline.cmdline[j++]=*c++;
-
-	tag->u.cmdline.cmdline[j]=0;
-	tag->hdr.size = (j + 7 + sizeof(struct tag_header)) >> 2;
-
-	/* Hardware revision */
-	tag = tag_next(tag);
-	tag->hdr.tag = ATAG_REVISION;
-	tag->hdr.size = tag_size(tag_revision);
-	tag->u.revision.rev = ((unsigned char) buffer[33])-'0';
-
-	/* End of the taglist */
-	tag = tag_next(tag);
-	tag->hdr.tag = 0;
-	tag->hdr.size = 0;
-}
-
-
-typedef int (*ofw_handle_t)(void *);
-
-/* Everything below is called with a wrong MMU setting.
- * This means: no string constants, no initialization of
- * arrays, no global variables! This is ugly but I didn't
- * want to write this in assembler :-)
- */
-
-int
-of_decode_int(const unsigned char *p)
-{
-	unsigned int i = *p++ << 8;
-	i = (i + *p++) << 8;
-	i = (i + *p++) << 8;
-	return (i + *p);
-}
-  
-int
-OF_finddevice(ofw_handle_t openfirmware, char *name)
-{
-	unsigned int args[8];
-	char service[12];
-
-	service[0]='f';
-	service[1]='i';
-	service[2]='n';
-	service[3]='d';
-	service[4]='d';
-	service[5]='e';
-	service[6]='v';
-	service[7]='i';
-	service[8]='c';
-	service[9]='e';
-	service[10]='\0';
-
-	args[0]=(unsigned int)service;
-	args[1]=1;
-	args[2]=1;
-	args[3]=(unsigned int)name;
-
-	if (openfirmware(args) == -1)
-		return -1;
-	return args[4];
-}
-
-int
-OF_getproplen(ofw_handle_t openfirmware, int handle, char *prop)
-{
-	unsigned int args[8];
-	char service[12];
-
-	service[0]='g';
-	service[1]='e';
-	service[2]='t';
-	service[3]='p';
-	service[4]='r';
-	service[5]='o';
-	service[6]='p';
-	service[7]='l';
-	service[8]='e';
-	service[9]='n';
-	service[10]='\0';
-
-	args[0] = (unsigned int)service;
-	args[1] = 2;
-	args[2] = 1;
-	args[3] = (unsigned int)handle;
-	args[4] = (unsigned int)prop;
-
-	if (openfirmware(args) == -1)
-		return -1;
-	return args[5];
-}
-  
-int
-OF_getprop(ofw_handle_t openfirmware, int handle, char *prop, void *buf, unsigned int buflen)
-{
-	unsigned int args[8];
-	char service[8];
-
-	service[0]='g';
-	service[1]='e';
-	service[2]='t';
-	service[3]='p';
-	service[4]='r';
-	service[5]='o';
-	service[6]='p';
-	service[7]='\0';
-
-	args[0] = (unsigned int)service;
-	args[1] = 4;
-	args[2] = 1;
-	args[3] = (unsigned int)handle;
-	args[4] = (unsigned int)prop;
-	args[5] = (unsigned int)buf;
-	args[6] = buflen;
-
-	if (openfirmware(args) == -1)
-		return -1;
-	return args[7];
-}
-  
-asmlinkage void ofw_init(ofw_handle_t o, int *nomr, int *pointer)
-{
-	int phandle,i,mem_len,buffer[32];
-	char temp[15];
-  
-	temp[0]='/';
-	temp[1]='m';
-	temp[2]='e';
-	temp[3]='m';
-	temp[4]='o';
-	temp[5]='r';
-	temp[6]='y';
-	temp[7]='\0';
-
-	phandle=OF_finddevice(o,temp);
-
-	temp[0]='r';
-	temp[1]='e';
-	temp[2]='g';
-	temp[3]='\0';
-
-	mem_len = OF_getproplen(o,phandle, temp);
-	OF_getprop(o,phandle, temp, buffer, mem_len);
-	*nomr=mem_len >> 3;
-
-	for (i=0; i<=mem_len/4; i++) pointer[i]=of_decode_int((const unsigned char *)&buffer[i]);
-
-	temp[0]='/';
-	temp[1]='c';
-	temp[2]='h';
-	temp[3]='o';
-	temp[4]='s';
-	temp[5]='e';
-	temp[6]='n';
-	temp[7]='\0';
-
-	phandle=OF_finddevice(o,temp);
-
-	temp[0]='b';
-	temp[1]='o';
-	temp[2]='o';
-	temp[3]='t';
-	temp[4]='a';
-	temp[5]='r';
-	temp[6]='g';
-	temp[7]='s';
-	temp[8]='\0';
-
-	mem_len = OF_getproplen(o,phandle, temp);
-	OF_getprop(o,phandle, temp, buffer, mem_len);
-	if (mem_len > 128) mem_len=128;
-	for (i=0; i<=mem_len/4; i++) pointer[i+33]=buffer[i];
-	pointer[i+33]=0;
-
-	temp[0]='/';
-	temp[1]='\0';
-	phandle=OF_finddevice(o,temp);
-	temp[0]='b';
-	temp[1]='a';
-	temp[2]='n';
-	temp[3]='n';
-	temp[4]='e';
-	temp[5]='r';
-	temp[6]='-';
-	temp[7]='n';
-	temp[8]='a';
-	temp[9]='m';
-	temp[10]='e';
-	temp[11]='\0';
-	mem_len = OF_getproplen(o,phandle, temp);
-	OF_getprop(o,phandle, temp, buffer, mem_len);
-	* ((unsigned char *) &pointer[32]) = ((unsigned char *) buffer)[mem_len-2];
-}
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 641b3c9..d57c1a6 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -40,26 +40,31 @@ dtb-$(CONFIG_ARCH_AT91)	+= sama5d31ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d33ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d34ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d35ek.dtb
-
+dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
+dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm11351-brt.dtb \
+	bcm28155-ap.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
-dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb
 dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
 	da850-evm.dtb
 dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
 	dove-cubox.dtb \
+	dove-d2plug.dtb \
+	dove-d3plug.dtb \
 	dove-dove-db.dtb
 dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos4210-smdkv310.dtb \
 	exynos4210-trats.dtb \
 	exynos4210-universal_c210.dtb \
 	exynos4412-odroidx.dtb \
-	exynos4412-smdk4412.dtb \
 	exynos4412-origen.dtb \
+	exynos4412-smdk4412.dtb \
+	exynos4412-trats2.dtb \
 	exynos5250-arndale.dtb \
-	exynos5440-sd5v1.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5250-snow.dtb \
 	exynos5420-smdk5420.dtb \
+	exynos5440-sd5v1.dtb \
 	exynos5440-ssdk5440.dtb
 dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
 	ecx-2000.dtb
@@ -83,26 +88,33 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
 	kirkwood-lschlv2.dtb \
 	kirkwood-lsxhl.dtb \
 	kirkwood-mplcec4.dtb \
+	kirkwood-mv88f6281gtw-ge.dtb \
 	kirkwood-netgear_readynas_duo_v2.dtb \
 	kirkwood-ns2.dtb \
 	kirkwood-ns2lite.dtb \
 	kirkwood-ns2max.dtb \
 	kirkwood-ns2mini.dtb \
 	kirkwood-nsa310.dtb \
+	kirkwood-nsa310a.dtb \
+	kirkwood-openblocks_a6.dtb \
+	kirkwood-openblocks_a7.dtb \
 	kirkwood-sheevaplug.dtb \
 	kirkwood-sheevaplug-esata.dtb \
 	kirkwood-topkick.dtb \
 	kirkwood-ts219-6281.dtb \
-	kirkwood-ts219-6282.dtb \
-	kirkwood-openblocks_a6.dtb
+	kirkwood-ts219-6282.dtb
 dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
-dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
-	msm8960-cdp.dtb
+dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \
+	qcom-msm8960-cdp.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
 	armada-370-mirabox.dtb \
+	armada-370-netgear-rn102.dtb \
+	armada-370-netgear-rn104.dtb \
 	armada-370-rd.dtb \
+	armada-xp-axpwifiap.dtb \
 	armada-xp-db.dtb \
 	armada-xp-gp.dtb \
+	armada-xp-matrix.dtb \
 	armada-xp-openblocks-ax3-4.dtb
 dtb-$(CONFIG_ARCH_MXC) += \
 	imx25-karo-tx25.dtb \
@@ -112,6 +124,8 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx27-pdk.dtb \
 	imx27-phytec-phycore-som.dtb \
 	imx27-phytec-phycore-rdk.dtb \
+	imx27-phytec-phycard-s-som.dtb \
+	imx27-phytec-phycard-s-rdk.dtb \
 	imx31-bug.dtb \
 	imx51-apf51.dtb \
 	imx51-apf51dev.dtb \
@@ -131,7 +145,10 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx6q-sabrelite.dtb \
 	imx6q-sabresd.dtb \
 	imx6q-sbc6x.dtb \
+	imx6q-udoo.dtb \
+	imx6q-wandboard.dtb \
 	imx6sl-evk.dtb \
+	vf610-cosmic.dtb \
 	vf610-twr.dtb
 dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx23-olinuxino.dtb \
@@ -143,8 +160,11 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx28-cfa10037.dtb \
 	imx28-cfa10049.dtb \
 	imx28-cfa10055.dtb \
+	imx28-cfa10056.dtb \
 	imx28-cfa10057.dtb \
+	imx28-cfa10058.dtb \
 	imx28-evk.dtb \
+	imx28-m28cu3.dtb \
 	imx28-m28evk.dtb \
 	imx28-sps1.dtb \
 	imx28-tx28.dtb
@@ -158,9 +178,15 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	omap3-devkit8000.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-evm.dtb \
+	omap3-evm-37xx.dtb \
+	omap3-n900.dtb \
+	omap3-n9.dtb \
+	omap3-n950.dtb \
 	omap3-tobi.dtb \
+	omap3-gta04.dtb \
 	omap3-igep0020.dtb \
 	omap3-igep0030.dtb \
+	omap3-zoom3.dtb \
 	omap4-panda.dtb \
 	omap4-panda-a4.dtb \
 	omap4-panda-es.dtb \
@@ -171,28 +197,45 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	am335x-evm.dtb \
 	am335x-evmsk.dtb \
 	am335x-bone.dtb \
+	am335x-boneblack.dtb \
+	am335x-nano.dtb \
+	am335x-base0033.dtb \
 	am3517-evm.dtb \
 	am3517_mt_ventoux.dtb \
-	am43x-epos-evm.dtb
+	am43x-epos-evm.dtb \
+	dra7-evm.dtb
 dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
-dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \
-	hrefprev60.dtb \
-	hrefv60plus.dtb \
-	ccu8540.dtb \
-	ccu9540.dtb
+dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
+	ste-hrefprev60-stuib.dtb \
+	ste-hrefprev60-tvk.dtb \
+	ste-hrefv60plus-stuib.dtb \
+	ste-hrefv60plus-tvk.dtb \
+	ste-ccu8540.dtb \
+	ste-ccu9540.dtb
 dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
+dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \
+	s3c6410-smdk6410.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
+	r7s72100-genmai.dtb \
 	r8a7740-armadillo800eva.dtb \
 	r8a7778-bockw.dtb \
+	r8a7778-bockw-reference.dtb \
 	r8a7740-armadillo800eva-reference.dtb \
+	r8a7779-marzen.dtb \
 	r8a7779-marzen-reference.dtb \
+	r8a7791-koelsch.dtb \
 	r8a7790-lager.dtb \
+	r8a7790-lager-reference.dtb \
 	sh73a0-kzm9g.dtb \
 	sh73a0-kzm9g-reference.dtb \
 	r8a73a4-ape6evm.dtb \
+	r8a73a4-ape6evm-reference.dtb \
 	sh7372-mackerel.dtb
-dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \
+dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb
+dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \
+	socfpga_cyclone5_socdk.dtb \
+	socfpga_cyclone5_sockit.dtb \
 	socfpga_vt.dtb
 dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
 	spear1340-evb.dtb
@@ -206,11 +249,16 @@ dtb-$(CONFIG_ARCH_STI)+= stih415-b2000.dtb \
 	stih415-b2020.dtb \
 	stih416-b2020.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += \
+	sun4i-a10-a1000.dtb \
 	sun4i-a10-cubieboard.dtb \
 	sun4i-a10-mini-xplus.dtb \
 	sun4i-a10-hackberry.dtb \
 	sun5i-a10s-olinuxino-micro.dtb \
-	sun5i-a13-olinuxino.dtb
+	sun5i-a13-olinuxino.dtb \
+	sun6i-a31-colombus.dtb \
+	sun7i-a20-cubieboard2.dtb \
+	sun7i-a20-cubietruck.dtb \
+	sun7i-a20-olinuxino-micro.dtb
 dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra20-iris-512.dtb \
 	tegra20-medcom-wide.dtb \
@@ -225,7 +273,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra30-cardhu-a02.dtb \
 	tegra30-cardhu-a04.dtb \
 	tegra114-dalmore.dtb \
-	tegra114-pluto.dtb
+	tegra124-venice2.dtb
 dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \
 	versatile-pb.dtb
 dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb
diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts
new file mode 100644
index 0000000..b4f95c2
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-base0033.dts
@@ -0,0 +1,16 @@
+/*
+ * am335x-base0033.dts - Device Tree file for IGEP AQUILA EXPANSION
+ *
+ * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am335x-igep0033.dtsi"
+
+/ {
+	model = "IGEP COM AM335x on AQUILA Expansion";
+	compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx";
+};
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
new file mode 100644
index 0000000..e3f27ec
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -0,0 +1,299 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	model = "TI AM335x BeagleBone";
+	compatible = "ti,am335x-bone", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		compatible = "gpio-leds";
+
+		led@2 {
+			label = "beaglebone:green:heartbeat";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "beaglebone:green:mmc0";
+			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+
+		led@5 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+	};
+
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clkout2_pin>;
+
+	user_leds_s0: user_leds_s0 {
+		pinctrl-single,pins = <
+			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+			0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
+			0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
+			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
+			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
+			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
+			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
+			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
+			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
+			0x13c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
+			0x140 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
+		>;
+	};
+
+	emmc_pins: pinmux_emmc_pins {
+		pinctrl-single,pins = <
+			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+
+	control@44e10000 {
+		status = "okay";
+	};
+
+	usb-phy@47401300 {
+		status = "okay";
+	};
+
+	usb-phy@47401b00 {
+		status = "okay";
+	};
+
+	usb@47401000 {
+		status = "okay";
+	};
+
+	usb@47401800 {
+		status = "okay";
+		dr_mode = "host";
+	};
+
+	dma-controller@07402000  {
+		status = "okay";
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+	regulators {
+		dcdc1_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1325000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			regulator-always-on;
+		};
+	};
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "mii";
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "mii";
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+};
+
+&mmc1 {
+	status = "okay";
+	bus-width = <0x4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+};
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index 444b4ed..94ee427a 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -8,229 +8,22 @@
 /dts-v1/;
 
 #include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
 
-/ {
-	model = "TI AM335x BeagleBone";
-	compatible = "ti,am335x-bone", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc2_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	am33xx_pinmux: pinmux@44e10800 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&clkout2_pin>;
-
-		user_leds_s0: user_leds_s0 {
-			pinctrl-single,pins = <
-				0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-				0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-				0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
-				0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
-			>;
-		};
-
-		i2c0_pins: pinmux_i2c0_pins {
-			pinctrl-single,pins = <
-				0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-				0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-			>;
-		};
-
-		uart0_pins: pinmux_uart0_pins {
-			pinctrl-single,pins = <
-				0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-				0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-			>;
-		};
-
-		clkout2_pin: pinmux_clkout2_pin {
-			pinctrl-single,pins = <
-				0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-			>;
-		};
-
-		cpsw_default: cpsw_default {
-			pinctrl-single,pins = <
-				/* Slave 1 */
-				0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
-				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
-				0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
-				0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
-				0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
-				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
-				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
-				0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
-				0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
-				0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
-				0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
-				0x13c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
-				0x140 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
-			>;
-		};
-
-		cpsw_sleep: cpsw_sleep {
-			pinctrl-single,pins = <
-				/* Slave 1 reset value */
-				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-
-		davinci_mdio_default: davinci_mdio_default {
-			pinctrl-single,pins = <
-				/* MDIO */
-				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-			>;
-		};
-
-		davinci_mdio_sleep: davinci_mdio_sleep {
-			pinctrl-single,pins = <
-				/* MDIO reset value */
-				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-	};
-
-	ocp {
-		uart0: serial@44e09000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins>;
-
-			status = "okay";
-		};
-
-		i2c0: i2c@44e0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins>;
-
-			status = "okay";
-			clock-frequency = <400000>;
-
-			tps: tps@24 {
-				reg = <0x24>;
-			};
-
-		};
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0>;
-
-		compatible = "gpio-leds";
-
-		led@2 {
-			label = "beaglebone:green:heartbeat";
-			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led@3 {
-			label = "beaglebone:green:mmc0";
-			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led@4 {
-			label = "beaglebone:green:usr2";
-			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led@5 {
-			label = "beaglebone:green:usr3";
-			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-always-on;
 };
 
-/include/ "tps65217.dtsi"
-
-&tps {
-	regulators {
-		dcdc1_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1325000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		ldo3_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		ldo4_reg: regulator@6 {
-			regulator-always-on;
-		};
-	};
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "mii";
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "mii";
+&mmc1 {
+	vmmc-supply = <&ldo3_reg>;
 };
 
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-
+&sham {
+	status = "okay";
 };
 
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
+&aes {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
new file mode 100644
index 0000000..6b71ad9
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	status = "okay";
+	ti,vcc-aux-disable-is-sleep;
+};
+
+&am33xx_pinmux {
+	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
+		pinctrl-single,pins = <
+			0x1b0 0x03      /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
+			0xa0 0x08       /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xa4 0x08       /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xa8 0x08       /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xac 0x08       /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xb0 0x08       /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xb4 0x08       /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xb8 0x08       /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xbc 0x08       /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xc0 0x08       /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xc4 0x08       /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xc8 0x08       /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xcc 0x08       /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xd0 0x08       /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xd4 0x08       /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xd8 0x08       /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xdc 0x08       /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xe0 0x00       /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+			0xe4 0x00       /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+			0xe8 0x00       /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+			0xec 0x00       /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+		>;
+	};
+	nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
+		pinctrl-single,pins = <
+			0x1b0 0x03      /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
+		>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+};
+
+/ {
+	hdmi {
+		compatible = "ti,tilcdc,slave";
+		i2c = <&i2c0>;
+		pinctrl-names = "default", "off";
+		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
+		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 3aee1a4..9874294 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -24,295 +24,6 @@
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	am33xx_pinmux: pinmux@44e10800 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;
-
-		matrix_keypad_s0: matrix_keypad_s0 {
-			pinctrl-single,pins = <
-				0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-				0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-				0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
-				0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
-				0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
-			>;
-		};
-
-		volume_keys_s0: volume_keys_s0 {
-			pinctrl-single,pins = <
-				0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_sclk.gpio0_2 */
-				0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_d0.gpio0_3 */
-			>;
-		};
-
-		i2c0_pins: pinmux_i2c0_pins {
-			pinctrl-single,pins = <
-				0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-				0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-			>;
-		};
-
-		i2c1_pins: pinmux_i2c1_pins {
-			pinctrl-single,pins = <
-				0x158 (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_d1.i2c1_sda */
-				0x15c (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_cs0.i2c1_scl */
-			>;
-		};
-
-		uart0_pins: pinmux_uart0_pins {
-			pinctrl-single,pins = <
-				0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-				0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-			>;
-		};
-
-		clkout2_pin: pinmux_clkout2_pin {
-			pinctrl-single,pins = <
-				0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-			>;
-		};
-
-		nandflash_pins_s0: nandflash_pins_s0 {
-			pinctrl-single,pins = <
-				0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-				0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-				0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-				0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-				0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-				0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-				0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-				0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-				0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-				0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
-				0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-				0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-				0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-				0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-				0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
-			>;
-		};
-
-		ecap0_pins: backlight_pins {
-			pinctrl-single,pins = <
-				0x164 0x0	/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
-			>;
-		};
-
-		cpsw_default: cpsw_default {
-			pinctrl-single,pins = <
-				/* Slave 1 */
-				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-				0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-				0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-				0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-			>;
-		};
-
-		cpsw_sleep: cpsw_sleep {
-			pinctrl-single,pins = <
-				/* Slave 1 reset value */
-				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-
-		davinci_mdio_default: davinci_mdio_default {
-			pinctrl-single,pins = <
-				/* MDIO */
-				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-			>;
-		};
-
-		davinci_mdio_sleep: davinci_mdio_sleep {
-			pinctrl-single,pins = <
-				/* MDIO reset value */
-				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-	};
-
-	ocp {
-		uart0: serial@44e09000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins>;
-
-			status = "okay";
-		};
-
-		i2c0: i2c@44e0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins>;
-
-			status = "okay";
-			clock-frequency = <400000>;
-
-			tps: tps@2d {
-				reg = <0x2d>;
-			};
-		};
-
-		i2c1: i2c@4802a000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins>;
-
-			status = "okay";
-			clock-frequency = <100000>;
-
-			lis331dlh: lis331dlh@18 {
-				compatible = "st,lis331dlh", "st,lis3lv02d";
-				reg = <0x18>;
-				Vdd-supply = <&lis3_reg>;
-				Vdd_IO-supply = <&lis3_reg>;
-
-				st,click-single-x;
-				st,click-single-y;
-				st,click-single-z;
-				st,click-thresh-x = <10>;
-				st,click-thresh-y = <10>;
-				st,click-thresh-z = <10>;
-				st,irq1-click;
-				st,irq2-click;
-				st,wakeup-x-lo;
-				st,wakeup-x-hi;
-				st,wakeup-y-lo;
-				st,wakeup-y-hi;
-				st,wakeup-z-lo;
-				st,wakeup-z-hi;
-				st,min-limit-x = <120>;
-				st,min-limit-y = <120>;
-				st,min-limit-z = <140>;
-				st,max-limit-x = <550>;
-				st,max-limit-y = <550>;
-				st,max-limit-z = <750>;
-			};
-
-			tsl2550: tsl2550@39 {
-				compatible = "taos,tsl2550";
-				reg = <0x39>;
-			};
-
-			tmp275: tmp275@48 {
-				compatible = "ti,tmp275";
-				reg = <0x48>;
-			};
-		};
-
-		elm: elm@48080000 {
-			status = "okay";
-		};
-
-		epwmss0: epwmss@48300000 {
-			status = "okay";
-
-			ecap0: ecap@48300100 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&ecap0_pins>;
-			};
-		};
-
-		gpmc: gpmc@50000000 {
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&nandflash_pins_s0>;
-			ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
-			nand@0,0 {
-				reg = <0 0 0>; /* CS0, offset 0 */
-				nand-bus-width = <8>;
-				ti,nand-ecc-opt = "bch8";
-				gpmc,device-nand = "true";
-				gpmc,device-width = <1>;
-				gpmc,sync-clk-ps = <0>;
-				gpmc,cs-on-ns = <0>;
-				gpmc,cs-rd-off-ns = <44>;
-				gpmc,cs-wr-off-ns = <44>;
-				gpmc,adv-on-ns = <6>;
-				gpmc,adv-rd-off-ns = <34>;
-				gpmc,adv-wr-off-ns = <44>;
-				gpmc,we-on-ns = <0>;
-				gpmc,we-off-ns = <40>;
-				gpmc,oe-on-ns = <0>;
-				gpmc,oe-off-ns = <54>;
-				gpmc,access-ns = <64>;
-				gpmc,rd-cycle-ns = <82>;
-				gpmc,wr-cycle-ns = <82>;
-				gpmc,wait-on-read = "true";
-				gpmc,wait-on-write = "true";
-				gpmc,bus-turnaround-ns = <0>;
-				gpmc,cycle2cycle-delay-ns = <0>;
-				gpmc,clk-activation-ns = <0>;
-				gpmc,wait-monitoring-ns = <0>;
-				gpmc,wr-access-ns = <40>;
-				gpmc,wr-data-mux-bus-ns = <0>;
-
-				#address-cells = <1>;
-				#size-cells = <1>;
-				elm_id = <&elm>;
-
-				/* MTD partition table */
-				partition@0 {
-					label = "SPL1";
-					reg = <0x00000000 0x000020000>;
-				};
-
-				partition@1 {
-					label = "SPL2";
-					reg = <0x00020000 0x00020000>;
-				};
-
-				partition@2 {
-					label = "SPL3";
-					reg = <0x00040000 0x00020000>;
-				};
-
-				partition@3 {
-					label = "SPL4";
-					reg = <0x00060000 0x00020000>;
-				};
-
-				partition@4 {
-					label = "U-boot";
-					reg = <0x00080000 0x001e0000>;
-				};
-
-				partition@5 {
-					label = "environment";
-					reg = <0x00260000 0x00020000>;
-				};
-
-				partition@6 {
-					label = "Kernel";
-					reg = <0x00280000 0x00500000>;
-				};
-
-				partition@7 {
-					label = "File-System";
-					reg = <0x00780000 0x0F880000>;
-				};
-			};
-		};
-	};
-
 	vbat: fixedregulator@0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
@@ -374,10 +85,447 @@
 		brightness-levels = <0 51 53 56 62 75 101 152 255>;
 		default-brightness-level = <8>;
 	};
+
+	panel {
+		compatible = "ti,tilcdc,panel";
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins_s0>;
+		panel-info {
+			ac-bias           = <255>;
+			ac-bias-intrpt    = <0>;
+			dma-burst-sz      = <16>;
+			bpp               = <32>;
+			fdd               = <0x80>;
+			sync-edge         = <0>;
+			sync-ctrl         = <1>;
+			raster-order      = <0>;
+			fifo-th           = <0>;
+		};
+
+		display-timings {
+			800x480p62 {
+				clock-frequency = <30000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <39>;
+				hback-porch = <39>;
+				hsync-len = <47>;
+				vback-porch = <29>;
+				vfront-porch = <13>;
+				vsync-len = <2>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "ti,da830-evm-audio";
+		ti,model = "AM335x-EVM";
+		ti,audio-codec = <&tlv320aic3106>;
+		ti,mcasp-controller = <&mcasp1>;
+		ti,codec-clock-rate = <12000000>;
+		ti,audio-routing =
+			"Headphone Jack",       "HPLOUT",
+			"Headphone Jack",       "HPROUT",
+			"LINE1L",               "Line In",
+			"LINE1R",               "Line In";
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;
+
+	matrix_keypad_s0: matrix_keypad_s0 {
+		pinctrl-single,pins = <
+			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
+			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
+			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
+		>;
+	};
+
+	volume_keys_s0: volume_keys_s0 {
+		pinctrl-single,pins = <
+			0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_sclk.gpio0_2 */
+			0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_d0.gpio0_3 */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			0x158 (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_d1.i2c1_sda */
+			0x15c (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_cs0.i2c1_scl */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+		>;
+	};
+
+	nandflash_pins_s0: nandflash_pins_s0 {
+		pinctrl-single,pins = <
+			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+
+	ecap0_pins: backlight_pins {
+		pinctrl-single,pins = <
+			0x164 0x0	/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	lcd_pins_s0: lcd_pins_s0 {
+		pinctrl-single,pins = <
+			0x20 0x01	/* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */
+			0x24 0x01	/* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */
+			0x28 0x01	/* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */
+			0x2c 0x01	/* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */
+			0x30 0x01	/* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */
+			0x34 0x01	/* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */
+			0x38 0x01	/* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */
+			0x3c 0x01	/* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */
+			0xa0 0x00	/* lcd_data0.lcd_data0, OUTPUT | MODE0 */
+			0xa4 0x00	/* lcd_data1.lcd_data1, OUTPUT | MODE0 */
+			0xa8 0x00	/* lcd_data2.lcd_data2, OUTPUT | MODE0 */
+			0xac 0x00	/* lcd_data3.lcd_data3, OUTPUT | MODE0 */
+			0xb0 0x00	/* lcd_data4.lcd_data4, OUTPUT | MODE0 */
+			0xb4 0x00	/* lcd_data5.lcd_data5, OUTPUT | MODE0 */
+			0xb8 0x00	/* lcd_data6.lcd_data6, OUTPUT | MODE0 */
+			0xbc 0x00	/* lcd_data7.lcd_data7, OUTPUT | MODE0 */
+			0xc0 0x00	/* lcd_data8.lcd_data8, OUTPUT | MODE0 */
+			0xc4 0x00	/* lcd_data9.lcd_data9, OUTPUT | MODE0 */
+			0xc8 0x00	/* lcd_data10.lcd_data10, OUTPUT | MODE0 */
+			0xcc 0x00	/* lcd_data11.lcd_data11, OUTPUT | MODE0 */
+			0xd0 0x00	/* lcd_data12.lcd_data12, OUTPUT | MODE0 */
+			0xd4 0x00	/* lcd_data13.lcd_data13, OUTPUT | MODE0 */
+			0xd8 0x00	/* lcd_data14.lcd_data14, OUTPUT | MODE0 */
+			0xdc 0x00	/* lcd_data15.lcd_data15, OUTPUT | MODE0 */
+			0xe0 0x00	/* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */
+			0xe4 0x00	/* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */
+			0xe8 0x00	/* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */
+			0xec 0x00	/* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */
+		>;
+	};
+
+	am335x_evm_audio_pins: am335x_evm_audio_pins {
+		pinctrl-single,pins = <
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rx_dv.mcasp1_aclkx */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_txd3.mcasp1_fsx */
+			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+};
+
+&usb {
+	status = "okay";
+
+	control@44e10000 {
+		status = "okay";
+	};
+
+	usb-phy@47401300 {
+		status = "okay";
+	};
+
+	usb-phy@47401b00 {
+		status = "okay";
+	};
+
+	usb@47401000 {
+		status = "okay";
+	};
+
+	usb@47401800 {
+		status = "okay";
+		dr_mode = "host";
+	};
+
+	dma-controller@07402000  {
+		status = "okay";
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	status = "okay";
+	clock-frequency = <100000>;
+
+	lis331dlh: lis331dlh@18 {
+		compatible = "st,lis331dlh", "st,lis3lv02d";
+		reg = <0x18>;
+		Vdd-supply = <&lis3_reg>;
+		Vdd_IO-supply = <&lis3_reg>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <10>;
+		st,click-thresh-y = <10>;
+		st,click-thresh-z = <10>;
+		st,irq1-click;
+		st,irq2-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+		st,min-limit-x = <120>;
+		st,min-limit-y = <120>;
+		st,min-limit-z = <140>;
+		st,max-limit-x = <550>;
+		st,max-limit-y = <550>;
+		st,max-limit-z = <750>;
+	};
+
+	tsl2550: tsl2550@39 {
+		compatible = "taos,tsl2550";
+		reg = <0x39>;
+	};
+
+	tmp275: tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tlv320aic3106: tlv320aic3106@1b {
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&vaux2_reg>;
+		IOVDD-supply = <&vaux2_reg>;
+		DRVDD-supply = <&vaux2_reg>;
+		DVDD-supply = <&vbat>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+};
+
+&elm {
+	status = "okay";
+};
+
+&epwmss0 {
+	status = "okay";
+
+	ecap0: ecap@48300100 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap0_pins>;
+	};
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins_s0>;
+	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
+	nand@0,0 {
+		reg = <0 0 0>; /* CS0, offset 0 */
+		nand-bus-width = <8>;
+		ti,nand-ecc-opt = "bch8";
+		gpmc,device-nand = "true";
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wait-on-read = "true";
+		gpmc,wait-on-write = "true";
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		elm_id = <&elm>;
+
+		/* MTD partition table */
+		partition@0 {
+			label = "SPL1";
+			reg = <0x00000000 0x000020000>;
+		};
+
+		partition@1 {
+			label = "SPL2";
+			reg = <0x00020000 0x00020000>;
+		};
+
+		partition@2 {
+			label = "SPL3";
+			reg = <0x00040000 0x00020000>;
+		};
+
+		partition@3 {
+			label = "SPL4";
+			reg = <0x00060000 0x00020000>;
+		};
+
+		partition@4 {
+			label = "U-boot";
+			reg = <0x00080000 0x001e0000>;
+		};
+
+		partition@5 {
+			label = "environment";
+			reg = <0x00260000 0x00020000>;
+		};
+
+		partition@6 {
+			label = "Kernel";
+			reg = <0x00280000 0x00500000>;
+		};
+
+		partition@7 {
+			label = "File-System";
+			reg = <0x00780000 0x0F880000>;
+		};
+	};
 };
 
 #include "tps65910.dtsi"
 
+&mcasp1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&am335x_evm_audio_pins>;
+
+		status = "okay";
+
+		op-mode = <0>;          /* MCASP_IIS_MODE */
+		tdm-slots = <2>;
+		/* 4 serializers */
+		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 1 2
+		>;
+		tx-num-evt = <1>;
+		rx-num-evt = <1>;
+};
+
 &tps {
 	vcc1-supply = <&vbat>;
 	vcc2-supply = <&vbat>;
@@ -448,6 +596,8 @@
 		};
 
 		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
 	};
@@ -488,3 +638,17 @@
 		ti,adc-channels = <4 5 6 7>;
 	};
 };
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <4>;
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 0c8ad17..03febf8 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -14,6 +14,7 @@
 /dts-v1/;
 
 #include "am33xx.dtsi"
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "TI AM335x EVM-SK";
@@ -30,194 +31,6 @@
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	am33xx_pinmux: pinmux@44e10800 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
-
-		user_leds_s0: user_leds_s0 {
-			pinctrl-single,pins = <
-				0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
-				0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad5.gpio1_5 */
-				0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad6.gpio1_6 */
-				0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad7.gpio1_7 */
-			>;
-		};
-
-		gpio_keys_s0: gpio_keys_s0 {
-			pinctrl-single,pins = <
-				0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_oen_ren.gpio2_3 */
-				0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_advn_ale.gpio2_2 */
-				0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
-				0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ben0_cle.gpio2_5 */
-			>;
-		};
-
-		i2c0_pins: pinmux_i2c0_pins {
-			pinctrl-single,pins = <
-				0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-				0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-			>;
-		};
-
-		uart0_pins: pinmux_uart0_pins {
-			pinctrl-single,pins = <
-				0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-				0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart0_txd.uart0_txd */
-			>;
-		};
-
-		clkout2_pin: pinmux_clkout2_pin {
-			pinctrl-single,pins = <
-				0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)		/* xdma_event_intr1.clkout2 */
-			>;
-		};
-
-		ecap2_pins: backlight_pins {
-			pinctrl-single,pins = <
-				0x19c 0x4	/* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */
-			>;
-		};
-
-		cpsw_default: cpsw_default {
-			pinctrl-single,pins = <
-				/* Slave 1 */
-				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-				0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-				0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-				0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-
-				/* Slave 2 */
-				0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-				0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
-				0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-				0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-				0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-				0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-				0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-				0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-				0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
-				0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-				0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-				0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
-			>;
-		};
-
-		cpsw_sleep: cpsw_sleep {
-			pinctrl-single,pins = <
-				/* Slave 1 reset value */
-				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-
-				/* Slave 2 reset value*/
-				0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-
-		davinci_mdio_default: davinci_mdio_default {
-			pinctrl-single,pins = <
-				/* MDIO */
-				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-			>;
-		};
-
-		davinci_mdio_sleep: davinci_mdio_sleep {
-			pinctrl-single,pins = <
-				/* MDIO reset value */
-				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-	};
-
-	ocp {
-		uart0: serial@44e09000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins>;
-
-			status = "okay";
-		};
-
-		i2c0: i2c@44e0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins>;
-
-			status = "okay";
-			clock-frequency = <400000>;
-
-			tps: tps@2d {
-				reg = <0x2d>;
-			};
-
-			lis331dlh: lis331dlh@18 {
-				compatible = "st,lis331dlh", "st,lis3lv02d";
-				reg = <0x18>;
-				Vdd-supply = <&lis3_reg>;
-				Vdd_IO-supply = <&lis3_reg>;
-
-				st,click-single-x;
-				st,click-single-y;
-				st,click-single-z;
-				st,click-thresh-x = <10>;
-				st,click-thresh-y = <10>;
-				st,click-thresh-z = <10>;
-				st,irq1-click;
-				st,irq2-click;
-				st,wakeup-x-lo;
-				st,wakeup-x-hi;
-				st,wakeup-y-lo;
-				st,wakeup-y-hi;
-				st,wakeup-z-lo;
-				st,wakeup-z-hi;
-				st,min-limit-x = <120>;
-				st,min-limit-y = <120>;
-				st,min-limit-z = <140>;
-				st,max-limit-x = <550>;
-				st,max-limit-y = <550>;
-				st,max-limit-z = <750>;
-			};
-		};
-
-		epwmss2: epwmss@48304000 {
-			status = "okay";
-
-			ecap2: ecap@48304100 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&ecap2_pins>;
-			};
-		};
-	};
-
 	vbat: fixedregulator@0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
@@ -298,10 +111,244 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&ecap2 0 50000 1>;
+		pwms = <&ecap2 0 50000 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 58 61 66 75 90 125 170 255>;
 		default-brightness-level = <8>;
 	};
+
+	sound {
+		compatible = "ti,da830-evm-audio";
+		ti,model = "AM335x-EVMSK";
+		ti,audio-codec = <&tlv320aic3106>;
+		ti,mcasp-controller = <&mcasp1>;
+		ti,codec-clock-rate = <24576000>;
+		ti,audio-routing =
+			"Headphone Jack",       "HPLOUT",
+			"Headphone Jack",       "HPROUT";
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
+
+	user_leds_s0: user_leds_s0 {
+		pinctrl-single,pins = <
+			0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
+			0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad5.gpio1_5 */
+			0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad6.gpio1_6 */
+			0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad7.gpio1_7 */
+		>;
+	};
+
+	gpio_keys_s0: gpio_keys_s0 {
+		pinctrl-single,pins = <
+			0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_oen_ren.gpio2_3 */
+			0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_advn_ale.gpio2_2 */
+			0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
+			0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ben0_cle.gpio2_5 */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)		/* xdma_event_intr1.clkout2 */
+		>;
+	};
+
+	ecap2_pins: backlight_pins {
+		pinctrl-single,pins = <
+			0x19c 0x4	/* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+
+			/* Slave 2 */
+			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
+			0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+
+			/* Slave 2 reset value*/
+			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	mcasp1_pins: mcasp1_pins {
+		pinctrl-single,pins = <
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+
+	lis331dlh: lis331dlh@18 {
+		compatible = "st,lis331dlh", "st,lis3lv02d";
+		reg = <0x18>;
+		Vdd-supply = <&lis3_reg>;
+		Vdd_IO-supply = <&lis3_reg>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <10>;
+		st,click-thresh-y = <10>;
+		st,click-thresh-z = <10>;
+		st,irq1-click;
+		st,irq2-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+		st,min-limit-x = <120>;
+		st,min-limit-y = <120>;
+		st,min-limit-z = <140>;
+		st,max-limit-x = <550>;
+		st,max-limit-y = <550>;
+		st,max-limit-z = <750>;
+	};
+
+	tlv320aic3106: tlv320aic3106@1b {
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&vaux2_reg>;
+		IOVDD-supply = <&vaux2_reg>;
+		DRVDD-supply = <&vaux2_reg>;
+		DVDD-supply = <&vbat>;
+	};
+};
+
+&usb {
+	status = "okay";
+
+	control@44e10000 {
+		status = "okay";
+	};
+
+	usb-phy@47401300 {
+		status = "okay";
+	};
+
+	usb@47401000 {
+		status = "okay";
+	};
+};
+
+&epwmss2 {
+	status = "okay";
+
+	ecap2: ecap@48304100 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap2_pins>;
+	};
 };
 
 #include "tps65910.dtsi"
@@ -376,6 +423,8 @@
 		};
 
 		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
 	};
@@ -402,3 +451,37 @@
 	phy_id = <&davinci_mdio>, <1>;
 	phy-mode = "rgmii-txid";
 };
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <4>;
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&gpio0 {
+	ti,no-reset-on-init;
+};
+
+&mcasp1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcasp1_pins>;
+
+		status = "okay";
+
+		op-mode = <0>;          /* MCASP_IIS_MODE */
+		tdm-slots = <2>;
+		/* 4 serializers */
+		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 1 2
+		>;
+		tx-num-evt = <1>;
+		rx-num-evt = <1>;
+};
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
new file mode 100644
index 0000000..6196244
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -0,0 +1,278 @@
+/*
+ * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x
+ *
+ * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
+
+		compatible = "gpio-leds";
+
+		led@0 {
+			label = "com:green:user";
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	vmmc: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&am33xx_pinmux {
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	nandflash_pins: pinmux_nandflash_pins {
+		pinctrl-single,pins = <
+			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
+			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	leds_pins: pinmux_leds_pins {
+		pinctrl-single,pins = <
+			0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+		>;
+	};
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
+
+	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
+
+	nand@0,0 {
+		reg = <0 0 0>; /* CS0, offset 0 */
+		nand-bus-width = <8>;
+		ti,nand-ecc-opt = "bch8";
+		gpmc,device-nand = "true";
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wait-on-read = "true";
+		gpmc,wait-on-write = "true";
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		elm_id = <&elm>;
+
+		/* MTD partition table */
+		partition@0 {
+			label = "SPL";
+			reg = <0x00000000 0x000080000>;
+		};
+
+		partition@1 {
+			label = "U-boot";
+			reg = <0x00080000 0x001e0000>;
+		};
+
+		partition@2 {
+			label = "U-Boot Env";
+			reg = <0x00260000 0x00020000>;
+		};
+
+		partition@3 {
+			label = "Kernel";
+			reg = <0x00280000 0x00500000>;
+		};
+
+		partition@4 {
+			label = "File System";
+			reg = <0x00780000 0x007880000>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc>;
+	bus-width = <4>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+#include "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1312500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-always-on;
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
new file mode 100644
index 0000000..9907b49
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -0,0 +1,431 @@
+/*
+ * Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+	model = "Newflow AM335x NanoBone";
+	compatible = "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led@0 {
+			label = "nanobone:green:usr1";
+			gpios = <&gpio1 5 0>;
+			default-state = "off";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&misc_pins>;
+
+	misc_pins: misc_pins {
+		pinctrl-single,pins = <
+			0x15c (PIN_OUTPUT | MUX_MODE7)	/* spi0_cs0.gpio0_5 */
+		>;
+	};
+
+	gpmc_pins: gpmc_pins {
+		pinctrl-single,pins = <
+			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			0x20 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad8.gpmc_ad8 */
+			0x24 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad9.gpmc_ad9 */
+			0x28 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad10.gpmc_ad10 */
+			0x2c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad11.gpmc_ad11 */
+			0x30 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad12.gpmc_ad12 */
+			0x34 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad13.gpmc_ad13 */
+			0x38 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad14.gpmc_ad14 */
+			0x3c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad15.gpmc_ad15 */
+
+			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
+			0x80 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn1.gpmc_csn1 */
+			0x84 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn2.gpmc_csn2 */
+			0x88 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn3.gpmc_csn3 */
+
+			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_ben0_cle.gpmc_ben0_cle */
+
+			0xa4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data1.gpmc_a1 */
+			0xa8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data2.gpmc_a2 */
+			0xac (PIN_OUTPUT | MUX_MODE1)		/* lcd_data3.gpmc_a3 */
+			0xb0 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data4.gpmc_a4 */
+			0xb4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data5.gpmc_a5 */
+			0xb8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data6.gpmc_a6 */
+			0xbc (PIN_OUTPUT | MUX_MODE1)		/* lcd_data7.gpmc_a7 */
+
+			0xe0 (PIN_OUTPUT | MUX_MODE1)		/* lcd_vsync.gpmc_a8 */
+			0xe4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_hsync.gpmc_a9 */
+			0xe8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_pclk.gpmc_a10 */
+		>;
+	};
+
+	i2c0_pins: i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	uart0_pins: uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT | MUX_MODE0)		/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	uart1_pins: uart1_pins {
+		pinctrl-single,pins = <
+			0x178 (PIN_OUTPUT | MUX_MODE7)		/* uart1_ctsn.uart1_ctsn */
+			0x17c (PIN_OUTPUT | MUX_MODE7)		/* uart1_rtsn.uart1_rtsn */
+			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
+			0x184 (PIN_OUTPUT | MUX_MODE0)		/* uart1_txd.uart1_txd */
+		>;
+	};
+
+	uart2_pins: uart2_pins {
+		pinctrl-single,pins = <
+			0xc0 (PIN_INPUT_PULLUP | MUX_MODE7)	/* lcd_data8.gpio2[14] */
+			0xc4 (PIN_OUTPUT | MUX_MODE7)		/* lcd_data9.gpio2[15] */
+			0x150 (PIN_INPUT | MUX_MODE1)		/* spi0_sclk.uart2_rxd */
+			0x154 (PIN_OUTPUT | MUX_MODE1)		/* spi0_d0.uart2_txd */
+		>;
+	};
+
+	uart3_pins: uart3_pins {
+		pinctrl-single,pins = <
+			0xc8 (PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data10.uart3_ctsn */
+			0xcc (PIN_OUTPUT | MUX_MODE6)		/* lcd_data11.uart3_rtsn */
+			0x160 (PIN_INPUT | MUX_MODE1)		/* spi0_cs1.uart3_rxd */
+			0x164 (PIN_OUTPUT | MUX_MODE1)		/* ecap0_in_pwm0_out.uart3_txd */
+		>;
+	};
+
+	uart4_pins: uart4_pins {
+		pinctrl-single,pins = <
+			0xd0 (PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data12.uart4_ctsn */
+			0xd4 (PIN_OUTPUT | MUX_MODE6)		/* lcd_data13.uart4_rtsn */
+			0x168 (PIN_INPUT | MUX_MODE1)		/* uart0_ctsn.uart4_rxd */
+			0x16c (PIN_OUTPUT | MUX_MODE1)		/* uart0_rtsn.uart4_txd */
+		>;
+	};
+
+	uart5_pins: uart5_pins {
+		pinctrl-single,pins = <
+			0xd8 (PIN_INPUT | MUX_MODE4)		/* lcd_data14.uart5_rxd */
+			0x144 (PIN_OUTPUT | MUX_MODE3)		/* rmiii1_refclk.uart5_txd */
+		>;
+	};
+
+	mmc1_pins: mmc1_pins {
+		pinctrl-single,pins = <
+			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
+			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
+			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
+			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
+			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
+			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
+			0x1e8 (PIN_INPUT_PULLUP | MUX_MODE7)	/* emu1.gpio3[8] */
+			0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7)	/* mcasp0_aclkr.gpio3[18] */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+	rts-gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+	rs485-rts-active-high;
+	rs485-rx-during-tx;
+	rs485-rts-delay = <1 1>;
+	linux,rs485-enabled-at-boot-time;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+	rts-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+	rs485-rts-active-high;
+	rs485-rts-delay = <1 1>;
+	linux,rs485-enabled-at-boot-time;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_pins>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	gpio@20 {
+		compatible = "mcp,mcp23017";
+		reg = <0x20>;
+	};
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+
+	eeprom@53 {
+		compatible = "mcp,24c02";
+		reg = <0x53>;
+		pagesize = <8>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1307";
+		reg = <0x68>;
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	compatible = "ti,am3352-gpmc";
+	ti,hwmods = "gpmc";
+	status = "okay";
+	gpmc,num-waitpins = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmc_pins>;
+
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x08000000 0x08000000>;	/* CS0: NOR 128M */
+
+	nor@0,0 {
+		reg = <0 0x00000000 0x08000000>;
+		compatible = "cfi-flash";
+		linux,mtd-name = "spansion,s29gl010p11t";
+		bank-width = <2>;
+
+		gpmc,mux-add-data = <2>;
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <160>;
+		gpmc,cs-wr-off-ns = <160>;
+		gpmc,adv-on-ns = <10>;
+		gpmc,adv-rd-off-ns = <30>;
+		gpmc,adv-wr-off-ns = <30>;
+		gpmc,oe-on-ns = <40>;
+		gpmc,oe-off-ns = <160>;
+		gpmc,we-on-ns = <40>;
+		gpmc,we-off-ns = <160>;
+		gpmc,rd-cycle-ns = <160>;
+		gpmc,wr-cycle-ns = <160>;
+		gpmc,access-ns = <150>;
+		gpmc,page-burst-access-ns = <10>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-delay-ns = <20>;
+		gpmc,wr-data-mux-bus-ns = <70>;
+		gpmc,wr-access-ns = <80>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/*
+		MTD partition table
+		===================
+		+------------+-->0x00000000-> U-Boot start
+		|            |
+		|            |-->0x000BFFFF-> U-Boot end
+		|            |-->0x000C0000-> ENV1 start
+		|            |
+		|            |-->0x000DFFFF-> ENV1 end
+		|            |-->0x000E0000-> ENV2 start
+		|            |
+		|            |-->0x000FFFFF-> ENV2 end
+		|            |-->0x00100000-> Kernel start
+		|            |
+		|            |-->0x004FFFFF-> Kernel end
+		|            |-->0x00500000-> File system start
+		|            |
+		|            |-->0x014FFFFF-> File system end
+		|            |-->0x01500000-> User data start
+		|            |
+		|            |-->0x03FFFFFF-> User data end
+		|            |-->0x04000000-> Data storage start
+		|            |
+		+------------+-->0x08000000-> NOR end (Free end)
+		*/
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000c0000>; /* 768KB */
+		};
+
+		partition@1 {
+			label = "env1";
+			reg = <0x000c0000 0x00020000>; /* 128KB */
+		};
+
+		partition@2 {
+			label = "env2";
+			reg = <0x000e0000 0x00020000>; /* 128KB */
+		};
+
+		partition@3 {
+			label = "kernel";
+			reg = <0x00100000 0x00400000>; /* 4MB */
+		};
+
+		partition@4 {
+			label = "rootfs";
+			reg = <0x00500000 0x01000000>; /* 16MB */
+		};
+
+		partition@5 {
+			label = "user";
+			reg = <0x01500000 0x02b00000>; /* 43MB */
+		};
+
+		partition@6 {
+			label = "data";
+			reg = <0x04000000 0x04000000>; /* 64MB */
+		};
+	};
+};
+
+&mac {
+	dual_emac = <1>;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	dual_emac_res_vlan = <2>;
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&ldo4_reg>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	bus-width = <4>;
+	cd-gpios = <&gpio3 8 0>;
+	wp-gpios = <&gpio3 18 0>;
+};
+
+#include "tps65217.dtsi"
+
+&tps {
+	regulators {
+		dcdc1_reg: regulator@0 {
+			/* +1.5V voltage with ±4% tolerance */
+			regulator-min-microvolt = <1450000>;
+			regulator-max-microvolt = <1550000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <915000>;
+			regulator-max-microvolt = <1140000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <915000>;
+			regulator-max-microvolt = <1140000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			/* +1.8V voltage with ±4% tolerance */
+			regulator-min-microvolt = <1750000>;
+			regulator-max-microvolt = <1870000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			/* +3.3V voltage with ±4% tolerance */
+			regulator-min-microvolt = <3175000>;
+			regulator-max-microvolt = <3430000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			/* +1.8V voltage with ±4% tolerance */
+			regulator-min-microvolt = <1750000>;
+			regulator-max-microvolt = <1870000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			/* +3.3V voltage with ±4% tolerance */
+			regulator-min-microvolt = <3175000>;
+			regulator-max-microvolt = <3430000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 38b446b..fcb9c8e 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -18,6 +18,9 @@
 	interrupt-parent = <&intc>;
 
 	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -26,6 +29,12 @@
 		serial5 = &uart5;
 		d_can0 = &dcan0;
 		d_can1 = &dcan1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		phy0 = &usb0_phy;
+		phy1 = &usb1_phy;
+		ethernet0 = &cpsw_emac0;
+		ethernet1 = &cpsw_emac1;
 	};
 
 	cpus {
@@ -53,6 +62,11 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupts = <3>;
+	};
+
 	/*
 	 * The soc node represents the soc top level view. It is uses for IPs
 	 * that are not memory mapped in the MPU view or for the MPU itself.
@@ -96,13 +110,25 @@
 			reg = <0x48200000 0x1000>;
 		};
 
+		edma: edma@49000000 {
+			compatible = "ti,edma3";
+			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
+			reg =	<0x49000000 0x10000>,
+				<0x44e10f90 0x10>;
+			interrupts = <12 13 14>;
+			#dma-cells = <1>;
+			dma-channels = <64>;
+			ti,edma-regions = <4>;
+			ti,edma-slots = <256>;
+		};
+
 		gpio0: gpio@44e07000 {
 			compatible = "ti,omap4-gpio";
 			ti,hwmods = "gpio1";
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 			reg = <0x44e07000 0x1000>;
 			interrupts = <96>;
 		};
@@ -113,7 +139,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 			reg = <0x4804c000 0x1000>;
 			interrupts = <98>;
 		};
@@ -124,7 +150,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 			reg = <0x481ac000 0x1000>;
 			interrupts = <32>;
 		};
@@ -135,7 +161,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 			reg = <0x481ae000 0x1000>;
 			interrupts = <62>;
 		};
@@ -224,6 +250,50 @@
 			status = "disabled";
 		};
 
+		mmc1: mmc@48060000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			ti,needs-special-reset;
+			ti,needs-special-hs-handling;
+			dmas = <&edma 24
+				&edma 25>;
+			dma-names = "tx", "rx";
+			interrupts = <64>;
+			interrupt-parent = <&intc>;
+			reg = <0x48060000 0x1000>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@481d8000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc2";
+			ti,needs-special-reset;
+			dmas = <&edma 2
+				&edma 3>;
+			dma-names = "tx", "rx";
+			interrupts = <28>;
+			interrupt-parent = <&intc>;
+			reg = <0x481d8000 0x1000>;
+			status = "disabled";
+		};
+
+		mmc3: mmc@47810000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc3";
+			ti,needs-special-reset;
+			interrupts = <29>;
+			interrupt-parent = <&intc>;
+			reg = <0x47810000 0x1000>;
+			status = "disabled";
+		};
+
+		hwspinlock: spinlock@480ca000 {
+			compatible = "ti,omap4-hwspinlock";
+			reg = <0x480ca000 0x1000>;
+			ti,hwmods = "spinlock";
+		};
+
 		wdt2: wdt@44e35000 {
 			compatible = "ti,omap3-wdt";
 			ti,hwmods = "wd_timer2";
@@ -319,6 +389,11 @@
 			interrupts = <65>;
 			ti,spi-num-cs = <2>;
 			ti,hwmods = "spi0";
+			dmas = <&edma 16
+				&edma 17
+				&edma 18
+				&edma 19>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
 			status = "disabled";
 		};
 
@@ -330,24 +405,140 @@
 			interrupts = <125>;
 			ti,spi-num-cs = <2>;
 			ti,hwmods = "spi1";
+			dmas = <&edma 42
+				&edma 43
+				&edma 44
+				&edma 45>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
 			status = "disabled";
 		};
 
-		usb@47400000 {
-			compatible = "ti,musb-am33xx";
-			reg = <0x47400000 0x1000	/* usbss */
-			       0x47401000 0x800		/* musb instance 0 */
-			       0x47401800 0x800>;	/* musb instance 1 */
-			interrupts = <17		/* usbss */
-				      18		/* musb instance 0 */
-				      19>;		/* musb instance 1 */
-			multipoint = <1>;
-			num-eps = <16>;
-			ram-bits = <12>;
-			port0-mode = <3>;
-			port1-mode = <3>;
-			power = <250>;
+		usb: usb@47400000 {
+			compatible = "ti,am33xx-usb";
+			reg = <0x47400000 0x1000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			ti,hwmods = "usb_otg_hs";
+			status = "disabled";
+
+			usb_ctrl_mod: control@44e10000 {
+				compatible = "ti,am335x-usb-ctrl-module";
+				reg = <0x44e10620 0x10
+					0x44e10648 0x4>;
+				reg-names = "phy_ctrl", "wakeup";
+				status = "disabled";
+			};
+
+			usb0_phy: usb-phy@47401300 {
+				compatible = "ti,am335x-usb-phy";
+				reg = <0x47401300 0x100>;
+				reg-names = "phy";
+				status = "disabled";
+				ti,ctrl_mod = <&usb_ctrl_mod>;
+			};
+
+			usb0: usb@47401000 {
+				compatible = "ti,musb-am33xx";
+				status = "disabled";
+				reg = <0x47401400 0x400
+					0x47401000 0x200>;
+				reg-names = "mc", "control";
+
+				interrupts = <18>;
+				interrupt-names = "mc";
+				dr_mode = "otg";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+				phys = <&usb0_phy>;
+
+				dmas = <&cppi41dma  0 0 &cppi41dma  1 0
+					&cppi41dma  2 0 &cppi41dma  3 0
+					&cppi41dma  4 0 &cppi41dma  5 0
+					&cppi41dma  6 0 &cppi41dma  7 0
+					&cppi41dma  8 0 &cppi41dma  9 0
+					&cppi41dma 10 0 &cppi41dma 11 0
+					&cppi41dma 12 0 &cppi41dma 13 0
+					&cppi41dma 14 0 &cppi41dma  0 1
+					&cppi41dma  1 1 &cppi41dma  2 1
+					&cppi41dma  3 1 &cppi41dma  4 1
+					&cppi41dma  5 1 &cppi41dma  6 1
+					&cppi41dma  7 1 &cppi41dma  8 1
+					&cppi41dma  9 1 &cppi41dma 10 1
+					&cppi41dma 11 1 &cppi41dma 12 1
+					&cppi41dma 13 1 &cppi41dma 14 1>;
+				dma-names =
+					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+					"rx14", "rx15",
+					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+					"tx14", "tx15";
+			};
+
+			usb1_phy: usb-phy@47401b00 {
+				compatible = "ti,am335x-usb-phy";
+				reg = <0x47401b00 0x100>;
+				reg-names = "phy";
+				status = "disabled";
+				ti,ctrl_mod = <&usb_ctrl_mod>;
+			};
+
+			usb1: usb@47401800 {
+				compatible = "ti,musb-am33xx";
+				status = "disabled";
+				reg = <0x47401c00 0x400
+					0x47401800 0x200>;
+				reg-names = "mc", "control";
+				interrupts = <19>;
+				interrupt-names = "mc";
+				dr_mode = "otg";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+				phys = <&usb1_phy>;
+
+				dmas = <&cppi41dma 15 0 &cppi41dma 16 0
+					&cppi41dma 17 0 &cppi41dma 18 0
+					&cppi41dma 19 0 &cppi41dma 20 0
+					&cppi41dma 21 0 &cppi41dma 22 0
+					&cppi41dma 23 0 &cppi41dma 24 0
+					&cppi41dma 25 0 &cppi41dma 26 0
+					&cppi41dma 27 0 &cppi41dma 28 0
+					&cppi41dma 29 0 &cppi41dma 15 1
+					&cppi41dma 16 1 &cppi41dma 17 1
+					&cppi41dma 18 1 &cppi41dma 19 1
+					&cppi41dma 20 1 &cppi41dma 21 1
+					&cppi41dma 22 1 &cppi41dma 23 1
+					&cppi41dma 24 1 &cppi41dma 25 1
+					&cppi41dma 26 1 &cppi41dma 27 1
+					&cppi41dma 28 1 &cppi41dma 29 1>;
+				dma-names =
+					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+					"rx14", "rx15",
+					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+					"tx14", "tx15";
+			};
+
+			cppi41dma: dma-controller@07402000 {
+				compatible = "ti,am3359-cppi41";
+				reg =  <0x47400000 0x1000
+					0x47402000 0x1000
+					0x47403000 0x1000
+					0x47404000 0x4000>;
+				reg-names = "glue", "controller", "scheduler", "queuemgr";
+				interrupts = <17>;
+				interrupt-names = "glue";
+				#dma-cells = <2>;
+				#dma-channels = <30>;
+				#dma-requests = <256>;
+				status = "disabled";
+			};
 		};
 
 		epwmss0: epwmss@48300000 {
@@ -492,6 +683,7 @@
 			reg = <0x44d00000 0x4000	/* M3 UMEM */
 			       0x44d80000 0x2000>;	/* M3 DMEM */
 			ti,hwmods = "wkup_m3";
+			ti,no-reset-on-init;
 		};
 
 		elm: elm@48080000 {
@@ -502,6 +694,15 @@
 			status = "disabled";
 		};
 
+		lcdc: lcdc@4830e000 {
+			compatible = "ti,am33xx-tilcdc";
+			reg = <0x4830e000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <36>;
+			ti,hwmods = "lcdc";
+			status = "disabled";
+		};
+
 		tscadc: tscadc@44e0d000 {
 			compatible = "ti,am3359-tscadc";
 			reg = <0x44e0d000 0x1000>;
@@ -522,6 +723,7 @@
 		gpmc: gpmc@50000000 {
 			compatible = "ti,am3352-gpmc";
 			ti,hwmods = "gpmc";
+			ti,no-idle-on-init;
 			reg = <0x50000000 0x2000>;
 			interrupts = <100>;
 			gpmc,num-cs = <7>;
@@ -530,5 +732,59 @@
 			#size-cells = <1>;
 			status = "disabled";
 		};
+
+		sham: sham@53100000 {
+			compatible = "ti,omap4-sham";
+			ti,hwmods = "sham";
+			reg = <0x53100000 0x200>;
+			interrupts = <109>;
+			dmas = <&edma 36>;
+			dma-names = "rx";
+		};
+
+		aes: aes@53500000 {
+			compatible = "ti,omap4-aes";
+			ti,hwmods = "aes";
+			reg = <0x53500000 0xa0>;
+			interrupts = <103>;
+			dmas = <&edma 6>,
+			       <&edma 5>;
+			dma-names = "tx", "rx";
+		};
+
+		mcasp0: mcasp@48038000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			ti,hwmods = "mcasp0";
+			reg = <0x48038000 0x2000>,
+			      <0x46000000 0x400000>;
+			reg-names = "mpu", "dat";
+			interrupts = <80>, <81>;
+			interrupts-names = "tx", "rx";
+			status = "disabled";
+			dmas = <&edma 8>,
+				<&edma 9>;
+			dma-names = "tx", "rx";
+		};
+
+		mcasp1: mcasp@4803C000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			ti,hwmods = "mcasp1";
+			reg = <0x4803C000 0x2000>,
+			      <0x46400000 0x400000>;
+			reg-names = "mpu", "dat";
+			interrupts = <82>, <83>;
+			interrupts-names = "tx", "rx";
+			status = "disabled";
+			dmas = <&edma 10>,
+				<&edma 11>;
+			dma-names = "tx", "rx";
+		};
+
+		rng: rng@48310000 {
+			compatible = "ti,omap4-rng";
+			ti,hwmods = "rng";
+			reg = <0x48310000 0x2000>;
+			interrupts = <111>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index ddc1df7..974d103 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -18,12 +18,21 @@
 
 
 	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
 		serial0 = &uart0;
+		ethernet0 = &cpsw_emac0;
+		ethernet1 = &cpsw_emac1;
 	};
 
 	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		cpu@0 {
 			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
 		};
 	};
 
@@ -35,16 +44,100 @@
 		      <0x48240100 0x0100>;
 	};
 
+	l2-cache-controller@48242000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x48242000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	am43xx_pinmux: pinmux@44e10800 {
+		compatible = "pinctrl-single";
+		reg = <0x44e10800 0x31c>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
 	ocp {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
+		ti,hwmods = "l3_main";
+
+		edma: edma@49000000 {
+			compatible = "ti,edma3";
+			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
+			reg =	<0x49000000 0x10000>,
+				<0x44e10f90 0x10>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <64>;
+			ti,edma-regions = <4>;
+			ti,edma-slots = <256>;
+		};
 
 		uart0: serial@44e09000 {
 			compatible = "ti,am4372-uart","ti,omap2-uart";
 			reg = <0x44e09000 0x2000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart1";
+		};
+
+		uart1: serial@48022000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x48022000 0x2000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart2";
+			status = "disabled";
+		};
+
+		uart2: serial@48024000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x48024000 0x2000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart3";
+			status = "disabled";
+		};
+
+		uart3: serial@481a6000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x481a6000 0x2000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart4";
+			status = "disabled";
+		};
+
+		uart4: serial@481a8000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x481a8000 0x2000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart5";
+			status = "disabled";
+		};
+
+		uart5: serial@481aa000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x481aa000 0x2000>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart6";
+			status = "disabled";
+		};
+
+		mailbox: mailbox@480C8000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x480C8000 0x200>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox";
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <8>;
+			ti,mbox-names = "wkup_m3";
+			ti,mbox-data = <0 0 0 0>;
+			status = "disabled";
 		};
 
 		timer1: timer@44e31000 {
@@ -52,17 +145,523 @@
 			reg = <0x44e31000 0x400>;
 			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 			ti,timer-alwon;
+			ti,hwmods = "timer1";
 		};
 
 		timer2: timer@48040000  {
 			compatible = "ti,am4372-timer","ti,am335x-timer";
 			reg = <0x48040000  0x400>;
 			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48042000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48042000 0x400>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer3";
+			status = "disabled";
+		};
+
+		timer4: timer@48044000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48044000 0x400>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-pwm;
+			ti,hwmods = "timer4";
+			status = "disabled";
+		};
+
+		timer5: timer@48046000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48046000 0x400>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-pwm;
+			ti,hwmods = "timer5";
+			status = "disabled";
+		};
+
+		timer6: timer@48048000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48048000 0x400>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-pwm;
+			ti,hwmods = "timer6";
+			status = "disabled";
+		};
+
+		timer7: timer@4804a000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x4804a000 0x400>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-pwm;
+			ti,hwmods = "timer7";
+			status = "disabled";
+		};
+
+		timer8: timer@481c1000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x481c1000 0x400>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer8";
+			status = "disabled";
+		};
+
+		timer9: timer@4833d000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x4833d000 0x400>;
+			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer9";
+			status = "disabled";
+		};
+
+		timer10: timer@4833f000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x4833f000 0x400>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer10";
+			status = "disabled";
+		};
+
+		timer11: timer@48341000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48341000 0x400>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer11";
+			status = "disabled";
 		};
 
 		counter32k: counter@44e86000 {
 			compatible = "ti,am4372-counter32k","ti,omap-counter32k";
 			reg = <0x44e86000 0x40>;
+			ti,hwmods = "counter_32k";
+		};
+
+		rtc@44e3e000 {
+			compatible = "ti,am4372-rtc","ti,da830-rtc";
+			reg = <0x44e3e000 0x1000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "rtc";
+			status = "disabled";
+		};
+
+		wdt@44e35000 {
+			compatible = "ti,am4372-wdt","ti,omap3-wdt";
+			reg = <0x44e35000 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "wd_timer2";
+		};
+
+		gpio0: gpio@44e07000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x44e07000 0x1000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio1";
+			status = "disabled";
+		};
+
+		gpio1: gpio@4804c000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x4804c000 0x1000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio2";
+			status = "disabled";
+		};
+
+		gpio2: gpio@481ac000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x481ac000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio3";
+			status = "disabled";
+		};
+
+		gpio3: gpio@481ae000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x481ae000 0x1000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio4";
+			status = "disabled";
+		};
+
+		gpio4: gpio@48320000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x48320000 0x1000>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio5";
+			status = "disabled";
+		};
+
+		gpio5: gpio@48322000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x48322000 0x1000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio6";
+			status = "disabled";
+		};
+
+		i2c0: i2c@44e0b000 {
+			compatible = "ti,am4372-i2c","ti,omap4-i2c";
+			reg = <0x44e0b000 0x1000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "i2c1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@4802a000 {
+			compatible = "ti,am4372-i2c","ti,omap4-i2c";
+			reg = <0x4802a000 0x1000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "i2c2";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@4819c000 {
+			compatible = "ti,am4372-i2c","ti,omap4-i2c";
+			reg = <0x4819c000 0x1000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "i2c3";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi0: spi@48030000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x48030000 0x400>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi0";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mmc1: mmc@48060000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x48060000 0x1000>;
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			ti,needs-special-reset;
+			dmas = <&edma 24
+				&edma 25>;
+			dma-names = "tx", "rx";
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@481d8000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x481d8000 0x1000>;
+			ti,hwmods = "mmc2";
+			ti,needs-special-reset;
+			dmas = <&edma 2
+				&edma 3>;
+			dma-names = "tx", "rx";
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc3: mmc@47810000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x47810000 0x1000>;
+			ti,hwmods = "mmc3";
+			ti,needs-special-reset;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		spi1: spi@481a0000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x481a0000 0x400>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@481a2000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x481a2000 0x400>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi2";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi3: spi@481a4000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x481a4000 0x400>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi3";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi4: spi@48345000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x48345000 0x400>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi4";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mac: ethernet@4a100000 {
+			compatible = "ti,am4372-cpsw","ti,cpsw";
+			reg = <0x4a100000 0x800
+			       0x4a101200 0x100>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ti,hwmods = "cpgmac0";
+			status = "disabled";
+			cpdma_channels = <8>;
+			ale_entries = <1024>;
+			bd_ram_size = <0x2000>;
+			no_bd_ram = <0>;
+			rx_descs = <64>;
+			mac_control = <0x20>;
+			slaves = <2>;
+			active_slave = <0>;
+			cpts_clock_mult = <0x80000000>;
+			cpts_clock_shift = <29>;
+			ranges;
+
+			davinci_mdio: mdio@4a101000 {
+				compatible = "ti,am4372-mdio","ti,davinci_mdio";
+				reg = <0x4a101000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "davinci_mdio";
+				bus_freq = <1000000>;
+				status = "disabled";
+			};
+
+			cpsw_emac0: slave@4a100200 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			cpsw_emac1: slave@4a100300 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+		};
+
+		epwmss0: epwmss@48300000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48300000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss0";
+			status = "disabled";
+
+			ecap0: ecap@48300100 {
+				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				reg = <0x48300100 0x80>;
+				ti,hwmods = "ecap0";
+				status = "disabled";
+			};
+
+			ehrpwm0: ehrpwm@48300200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				reg = <0x48300200 0x80>;
+				ti,hwmods = "ehrpwm0";
+				status = "disabled";
+			};
+		};
+
+		epwmss1: epwmss@48302000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48302000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss1";
+			status = "disabled";
+
+			ecap1: ecap@48302100 {
+				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				reg = <0x48302100 0x80>;
+				ti,hwmods = "ecap1";
+				status = "disabled";
+			};
+
+			ehrpwm1: ehrpwm@48302200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				reg = <0x48302200 0x80>;
+				ti,hwmods = "ehrpwm1";
+				status = "disabled";
+			};
+		};
+
+		epwmss2: epwmss@48304000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48304000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss2";
+			status = "disabled";
+
+			ecap2: ecap@48304100 {
+				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				reg = <0x48304100 0x80>;
+				ti,hwmods = "ecap2";
+				status = "disabled";
+			};
+
+			ehrpwm2: ehrpwm@48304200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				reg = <0x48304200 0x80>;
+				ti,hwmods = "ehrpwm2";
+				status = "disabled";
+			};
+		};
+
+		epwmss3: epwmss@48306000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48306000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss3";
+			status = "disabled";
+
+			ehrpwm3: ehrpwm@48306200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				reg = <0x48306200 0x80>;
+				ti,hwmods = "ehrpwm3";
+				status = "disabled";
+			};
+		};
+
+		epwmss4: epwmss@48308000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48308000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss4";
+			status = "disabled";
+
+			ehrpwm4: ehrpwm@48308200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				reg = <0x48308200 0x80>;
+				ti,hwmods = "ehrpwm4";
+				status = "disabled";
+			};
+		};
+
+		epwmss5: epwmss@4830a000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x4830a000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss5";
+			status = "disabled";
+
+			ehrpwm5: ehrpwm@4830a200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				reg = <0x4830a200 0x80>;
+				ti,hwmods = "ehrpwm5";
+				status = "disabled";
+			};
+		};
+
+		sham: sham@53100000 {
+			compatible = "ti,omap5-sham";
+			ti,hwmods = "sham";
+			reg = <0x53100000 0x300>;
+			dmas = <&edma 36>;
+			dma-names = "rx";
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		aes: aes@53501000 {
+			compatible = "ti,omap4-aes";
+			ti,hwmods = "aes";
+			reg = <0x53501000 0xa0>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma 6
+				&edma 5>;
+			dma-names = "tx", "rx";
+		};
+
+		des: des@53701000 {
+			compatible = "ti,omap4-des";
+			ti,hwmods = "des";
+			reg = <0x53701000 0xa0>;
+			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma 34
+				&edma 33>;
+			dma-names = "tx", "rx";
+		};
+
+		mcasp0: mcasp@48038000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			ti,hwmods = "mcasp0";
+			reg = <0x48038000 0x2000>,
+			      <0x46000000 0x400000>;
+			reg-names = "mpu", "dat";
+			interrupts = <80>, <81>;
+			interrupts-names = "tx", "rx";
+			status = "disabled";
+			dmas = <&edma 8>,
+			       <&edma 9>;
+			dma-names = "tx", "rx";
+		};
+
+		mcasp1: mcasp@4803C000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			ti,hwmods = "mcasp1";
+			reg = <0x4803C000 0x2000>,
+			      <0x46400000 0x400000>;
+			reg-names = "mpu", "dat";
+			interrupts = <82>, <83>;
+			interrupts-names = "tx", "rx";
+			status = "disabled";
+			dmas = <&edma 10>,
+			       <&edma 11>;
+			dma-names = "tx", "rx";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 74174d4..fbf9c4c 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -11,8 +11,176 @@
 /dts-v1/;
 
 #include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "TI AM43x EPOS EVM";
 	compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43";
+
+	vmmcsd_fixed: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+	};
+
+	am43xx_pinmux: pinmux@44e10800 {
+		cpsw_default: cpsw_default {
+			pinctrl-single,pins = <
+				/* Slave 1 */
+				0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs */
+				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
+				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxdv.rmii1_rxdv */
+				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
+				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
+				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
+				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
+				0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
+			>;
+		};
+
+		cpsw_sleep: cpsw_sleep {
+			pinctrl-single,pins = <
+				/* Slave 1 reset value */
+				0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		davinci_mdio_default: davinci_mdio_default {
+			pinctrl-single,pins = <
+				/* MDIO */
+				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			>;
+		};
+
+		davinci_mdio_sleep: davinci_mdio_sleep {
+			pinctrl-single,pins = <
+				/* MDIO reset value */
+				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		i2c0_pins: pinmux_i2c0_pins {
+			pinctrl-single,pins = <
+				0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+				0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			>;
+		};
+	};
+
+	matrix_keypad: matrix_keypad@0 {
+			compatible = "gpio-matrix-keypad";
+			debounce-delay-ms = <5>;
+			col-scan-delay-us = <2>;
+
+			row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH		/* Bank0, pin12 */
+				     &gpio0 13 GPIO_ACTIVE_HIGH		/* Bank0, pin13 */
+				     &gpio0 14 GPIO_ACTIVE_HIGH		/* Bank0, pin14 */
+				     &gpio0 15 GPIO_ACTIVE_HIGH>;	/* Bank0, pin15 */
+
+			col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH		/* Bank3, pin9 */
+				     &gpio3 10 GPIO_ACTIVE_HIGH		/* Bank3, pin10 */
+				     &gpio2 18 GPIO_ACTIVE_HIGH		/* Bank2, pin18 */
+				     &gpio2 19 GPIO_ACTIVE_HIGH>;	/* Bank2, pin19 */
+
+			linux,keymap = <0x00000201	/* P1 */
+				0x01000204	/* P4 */
+				0x02000207	/* P7 */
+				0x0300020a	/* NUMERIC_STAR */
+				0x00010202	/* P2 */
+				0x01010205	/* P5 */
+				0x02010208	/* P8 */
+				0x03010200	/* P0 */
+				0x00020203	/* P3 */
+				0x01020206	/* P6 */
+				0x02020209	/* P9 */
+				0x0302020b	/* NUMERIC_POUND */
+				0x00030067	/* UP */
+				0x0103006a	/* RIGHT */
+				0x0203006c	/* DOWN */
+				0x03030069>;	/* LEFT */
+		};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <16>;
+	phy-mode = "rmii";
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rmii";
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	at24@50 {
+		compatible = "at24,24c256";
+		pagesize = <64>;
+		reg = <0x50>;
+	};
+
+	pixcir_ts@5c {
+		compatible = "pixcir,pixcir_ts";
+		reg = <0x5c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <17 0>;
+
+		attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+
+		x-size = <1024>;
+		y-size = <768>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index beee169..90ce29d 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -14,7 +14,7 @@
  */
 
 /dts-v1/;
-/include/ "armada-370.dtsi"
+#include "armada-370.dtsi"
 
 / {
 	model = "Marvell Armada 370 Evaluation Board";
@@ -30,6 +30,9 @@
 	};
 
 	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
 		internal-regs {
 			serial@12000 {
 				clock-frequency = <200000000>;
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index 45b1077..2471d9d 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -9,7 +9,7 @@
  */
 
 /dts-v1/;
-/include/ "armada-370.dtsi"
+#include "armada-370.dtsi"
 
 / {
 	model = "Globalscale Mirabox";
@@ -25,6 +25,25 @@
 	};
 
 	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Internal mini-PCIe connector */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Connected on the PCB to a USB 3.0 XHCI controller */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
 		internal-regs {
 			serial@12000 {
 				clock-frequency = <200000000>;
@@ -120,22 +139,6 @@
 					reg = <0x25>;
 				};
 			};
-
-			pcie-controller {
-				status = "okay";
-
-				/* Internal mini-PCIe connector */
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-
-				/* Connected on the PCB to a USB 3.0 XHCI controller */
-				pcie@2,0 {
-					/* Port 1, Lane 0 */
-					status = "okay";
-				};
-			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
new file mode 100644
index 0000000..8ac2ac1
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -0,0 +1,194 @@
+/*
+ * Device Tree file for NETGEAR ReadyNAS 102
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "armada-370.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS 102";
+	compatible = "netgear,readynas-102", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Connected to Marvell SATA controller */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Connected to FL1009 USB 3.0 controller */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			serial@12000 {
+				clock-frequency = <200000000>;
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			pinctrl {
+				power_led_pin: power-led-pin {
+					marvell,pins = "mpp57";
+					marvell,function = "gpio";
+				};
+				sata1_led_pin: sata1-led-pin {
+					marvell,pins = "mpp15";
+					marvell,function = "gpio";
+				};
+
+				sata2_led_pin: sata2-led-pin {
+					marvell,pins = "mpp14";
+					marvell,function = "gpio";
+				};
+
+				backup_led_pin: backup-led-pin {
+					marvell,pins = "mpp56";
+					marvell,function = "gpio";
+				};
+
+				poweroff: poweroff {
+					marvell,pins = "mpp8";
+					marvell,function = "gpio";
+				};
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				clock-frequency = <100000>;
+				status = "okay";
+
+				g762: g762@3e {
+					compatible = "gmt,g762";
+					reg = <0x3e>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+			};
+		};
+	};
+
+	clocks {
+	       #address-cells = <1>;
+	       #size-cells = <0>;
+
+	       g762_clk: fixedclk {
+			 compatible = "fixed-clock";
+			 #clock-cells = <0>;
+			 clock-frequency = <8192>;
+	       };
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &power_led_pin
+			      &sata1_led_pin
+			      &sata2_led_pin
+			      &backup_led_pin >;
+		pinctrl-names = "default";
+
+		blue_power_led {
+			label = "rn102:blue:pwr";
+			gpios = <&gpio1 25 1>;  /* GPIO 57 Active Low */
+			linux,default-trigger = "heartbeat";
+		};
+
+		green_sata1_led {
+			label = "rn102:green:sata1";
+			gpios = <&gpio0 15 1>;  /* GPIO 15 Active Low */
+			default-state = "on";
+		};
+
+		green_sata2_led {
+			label = "rn102:green:sata2";
+			gpios = <&gpio0 14 1>;   /* GPIO 14 Active Low */
+			default-state = "on";
+		};
+
+		green_backup_led {
+			label = "rn102:green:backup";
+			gpios = <&gpio1 24 1>;   /* GPIO 56 Active Low */
+			default-state = "on";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			label = "Power Button";
+			linux,code = <116>;     /* KEY_POWER */
+			gpios = <&gpio1 30 0>;
+		};
+
+		button@2 {
+			label = "Reset Button";
+			linux,code = <0x198>;   /* KEY_RESTART */
+			gpios = <&gpio0 6 1>;
+		};
+
+		button@3 {
+			label = "Backup Button";
+			linux,code = <133>;     /* KEY_COPY */
+			gpios = <&gpio1 26 1>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 8 1>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
new file mode 100644
index 0000000..b0b32f5
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -0,0 +1,193 @@
+/*
+ * Device Tree file for NETGEAR ReadyNAS 104
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "armada-370.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS 104";
+	compatible = "netgear,readynas-104", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Connected to FL1009 USB 3.0 controller */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Connected to Marvell 88SE9215 SATA controller */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			serial@12000 {
+				clock-frequency = <200000000>;
+				status = "okay";
+			};
+
+			pinctrl {
+				poweroff: poweroff {
+					marvell,pins = "mpp60";
+					marvell,function = "gpio";
+				};
+
+				backup_key_pin: backup-key-pin {
+					marvell,pins = "mpp52";
+					marvell,function = "gpio";
+				};
+
+				power_key_pin: power-key-pin {
+					marvell,pins = "mpp62";
+					marvell,function = "gpio";
+				};
+
+				backup_led_pin: backup-led-pin {
+					marvell,pins = "mpp63";
+					marvell,function = "gpo";
+				};
+
+				power_led_pin: power-led-pin {
+					marvell,pins = "mpp64";
+					marvell,function = "gpio";
+				};
+
+				reset_key_pin: reset-key-pin {
+					marvell,pins = "mpp65";
+					marvell,function = "gpio";
+				};
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				clock-frequency = <100000>;
+				status = "okay";
+
+				g762: g762@3e {
+					compatible = "gmt,g762";
+					reg = <0x3e>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+			};
+		};
+	};
+
+	clocks {
+	       #address-cells = <1>;
+	       #size-cells = <0>;
+
+	       g762_clk: fixedclk {
+			 compatible = "fixed-clock";
+			 #clock-cells = <0>;
+			 clock-frequency = <8192>;
+	       };
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&backup_led_pin &power_led_pin>;
+		pinctrl-names = "default";
+
+		blue_backup_led {
+			label = "rn104:blue:backup";
+			gpios = <&gpio1 31 0>;   /* GPIO 63 Active High */
+			default-state = "off";
+		};
+
+		blue_power_led {
+			label = "rn104:blue:pwr";
+			gpios = <&gpio2 0 1>;    /* GPIO 64 Active Low */
+			linux,default-trigger = "keep";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&backup_key_pin
+			     &power_key_pin
+			     &reset_key_pin>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "Backup Button";
+			linux,code = <133>;     /* KEY_COPY */
+			gpios = <&gpio1 20 1>;
+		};
+
+		button@2 {
+			label = "Power Button";
+			linux,code = <116>;     /* KEY_POWER */
+			gpios = <&gpio1 30 0>;
+		};
+
+		button@3 {
+			label = "Reset Button";
+			linux,code = <0x198>;   /* KEY_RESTART */
+			gpios = <&gpio2 1 1>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 28 1>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index a3a2fed..f81810a 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -12,7 +12,7 @@
  */
 
 /dts-v1/;
-/include/ "armada-370.dtsi"
+#include "armada-370.dtsi"
 
 / {
 	model = "Marvell Armada 370 Reference Design";
@@ -28,6 +28,25 @@
 	};
 
 	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Internal mini-PCIe connector */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Internal mini-PCIe connector */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
 		internal-regs {
 			serial@12000 {
 				clock-frequency = <200000000>;
@@ -85,22 +104,6 @@
 					gpios = <&gpio0 6 1>;
 				};
 			};
-
-			pcie-controller {
-				status = "okay";
-
-				/* Internal mini-PCIe connector */
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-
-				/* Internal mini-PCIe connector */
-				pcie@2,0 {
-					/* Port 1, Lane 0 */
-					status = "okay";
-				};
-			};
 		};
 	};
  };
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 90b1176..00d6a79 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -18,6 +18,8 @@
 
 /include/ "skeleton64.dtsi"
 
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
 / {
 	model = "Marvell Armada 370 and XP SoC";
 	compatible = "marvell,armada-370-xp";
@@ -38,24 +40,80 @@
 	};
 
 	soc {
-		#address-cells = <1>;
+		#address-cells = <2>;
 		#size-cells = <1>;
-		compatible = "simple-bus";
+		controller = <&mbusc>;
 		interrupt-parent = <&mpic>;
-		ranges = <0          0 0xd0000000 0x0100000 /* internal registers */
-			  0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>;
+		pcie-mem-aperture = <0xe0000000 0x8000000>;
+		pcie-io-aperture  = <0xe8000000 0x100000>;
+
+		devbus-bootcs {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs0 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs1 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs2 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs3 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
 
 		internal-regs {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>;
+			};
 
 			mpic: interrupt-controller@20000 {
 				compatible = "marvell,mpic";
 				#interrupt-cells = <1>;
 				#size-cells = <1>;
 				interrupt-controller;
+				msi-controller;
 			};
 
 			coherency-fabric@20200 {
@@ -80,11 +138,17 @@
 				status = "disabled";
 			};
 
+			coredivclk: corediv-clock@18740 {
+				compatible = "marvell,armada-370-corediv-clock";
+				reg = <0x18740 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+
 			timer@20300 {
-				compatible = "marvell,armada-370-xp-timer";
 				reg = <0x20300 0x30>, <0x21040 0x30>;
 				interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
-				clocks = <&coreclk 2>;
 			};
 
 			sata@a0000 {
@@ -121,7 +185,6 @@
 
 			i2c0: i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <31>;
@@ -132,7 +195,6 @@
 
 			i2c1: i2c@11100 {
 				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11100 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <32>;
@@ -195,50 +257,15 @@
 				status = "disabled";
 			};
 
-			devbus-bootcs@10400 {
-				compatible = "marvell,mvebu-devbus";
-				reg = <0x10400 0x8>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			devbus-cs0@10408 {
-				compatible = "marvell,mvebu-devbus";
-				reg = <0x10408 0x8>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			devbus-cs1@10410 {
-				compatible = "marvell,mvebu-devbus";
-				reg = <0x10410 0x8>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			devbus-cs2@10418 {
-				compatible = "marvell,mvebu-devbus";
-				reg = <0x10418 0x8>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
+		};
+	};
 
-			devbus-cs3@10420 {
-				compatible = "marvell,mvebu-devbus";
-				reg = <0x10420 0x8>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
+	clocks {
+		/* 2 GHz fixed main PLL */
+		mainpll: mainpll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <2000000000>;
 		};
 	};
  };
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index fa3dfc6..7a4b82e 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -15,7 +15,7 @@
  * common to all Armada SoCs.
  */
 
-/include/ "armada-370-xp.dtsi"
+#include "armada-370-xp.dtsi"
 /include/ "skeleton.dtsi"
 
 / {
@@ -29,8 +29,67 @@
 	};
 
 	soc {
-		ranges = <0          0xd0000000 0x0100000 /* internal registers */
-			  0xe0000000 0xe0000000 0x8100000 /* PCIe */>;
+		compatible = "marvell,armada370-mbus", "simple-bus";
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
+		};
+
+		pcie-controller {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x08, 0xe8) 0       1 0 /* Port 1.0 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x08, 0xe0) 0       1 0 /* Port 1.0 IO  */>;
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+                                ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+                                          0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 58>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+                                ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+                                          0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 62>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+		};
+
 		internal-regs {
 			system-controller@18200 {
 				compatible = "marvell,armada-370-xp-system-controller";
@@ -78,7 +137,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupts-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupts = <82>, <83>, <84>, <85>;
 			};
 
@@ -89,7 +148,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupts-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupts = <87>, <88>, <89>, <90>;
 			};
 
@@ -100,10 +159,15 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupts-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupts = <91>;
 			};
 
+			timer@20300 {
+				compatible = "marvell,armada-370-timer";
+				clocks = <&coreclk 2>;
+			};
+
 			coreclk: mvebu-sar@18230 {
 				compatible = "marvell,armada-370-core-clock";
 				reg = <0x18230 0x08>;
@@ -155,6 +219,14 @@
 				};
 			};
 
+			i2c0: i2c@11000 {
+				reg = <0x11000 0x20>;
+			};
+
+			i2c1: i2c@11100 {
+				reg = <0x11100 0x20>;
+			};
+
 			usb@50000 {
 				clocks = <&coreclk 0>;
 			};
@@ -169,54 +241,6 @@
 					0x18304 0x4>;
 				status = "okay";
 			};
-
-			pcie-controller {
-				compatible = "marvell,armada-370-pcie";
-				status = "disabled";
-				device_type = "pci";
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-
-				bus-range = <0x00 0xff>;
-
-				ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
-					0x82000000 0 0x80000 0x80000 0 0x00002000   /* Port 1.0 registers */
-					0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
-					0x81000000 0 0          0xe8000000 0 0x00100000>; /* downstream I/O */
-
-				pcie@1,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-					reg = <0x0800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 58>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 5>;
-					status = "disabled";
-				};
-
-				pcie@2,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
-					reg = <0x1000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 62>;
-					marvell,pcie-port = <1>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 9>;
-					status = "disabled";
-				};
-			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
new file mode 100644
index 0000000..c5fe572
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -0,0 +1,164 @@
+/*
+ * Device Tree file for Marvell RD-AXPWiFiAP.
+ *
+ * Note: this board is shipped with a new generation boot loader that
+ * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
+ * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be
+ * used.
+ *
+ * Copyright (C) 2013 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "Marvell RD-AXPWiFiAP";
+	compatible = "marvell,rd-axpwifiap", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* First mini-PCIe port */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Second mini-PCIe port */
+			pcie@2,0 {
+				/* Port 0, Lane 1 */
+				status = "okay";
+			};
+
+			/* Renesas uPD720202 USB 3.0 controller */
+			pcie@3,0 {
+				/* Port 0, Lane 3 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			pinctrl {
+				pinctrl-0 = <&pmx_phy_int>;
+				pinctrl-names = "default";
+
+				pmx_ge0: pmx-ge0 {
+					marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
+						       "mpp4", "mpp5", "mpp6", "mpp7",
+						       "mpp8", "mpp9", "mpp10", "mpp11";
+					marvell,function = "ge0";
+				};
+
+				pmx_ge1: pmx-ge1 {
+					marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15",
+						       "mpp16", "mpp17", "mpp18", "mpp19",
+						       "mpp20", "mpp21", "mpp22", "mpp23";
+					marvell,function = "ge1";
+				};
+
+				pmx_keys: pmx-keys {
+					marvell,pins = "mpp33";
+					marvell,function = "gpio";
+				};
+
+				pmx_spi: pmx-spi {
+					marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39";
+					marvell,function = "spi";
+				};
+
+				pmx_phy_int: pmx-phy-int {
+					marvell,pins = "mpp32";
+					marvell,function = "gpio";
+				};
+			};
+
+			serial@12000 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+
+			serial@12100 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <1>;
+				status = "okay";
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&pmx_ge0>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@74000 {
+				pinctrl-0 = <&pmx_ge1>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			spi0: spi@10600 {
+				status = "okay";
+				pinctrl-0 = <&pmx_spi>;
+				pinctrl-names = "default";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "n25q128a13";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <108000000>;
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_keys>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "Factory Reset Button";
+			linux,code = <141>; /* KEY_SETUP */
+			gpios = <&gpio1 1 1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index e28e68f..bcf6d79 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -14,7 +14,7 @@
  */
 
 /dts-v1/;
-/include/ "armada-xp-mv78460.dtsi"
+#include "armada-xp-mv78460.dtsi"
 
 / {
 	model = "Marvell Armada XP Evaluation Board";
@@ -30,9 +30,70 @@
 	};
 
 	soc {
-		ranges = <0          0 0xd0000000 0x100000	/* Internal registers 1MiB */
-			  0xe0000000 0 0xe0000000 0x8100000     /* PCIe */
-			  0xf0000000 0 0xf0000000 0x1000000>;	/* Device Bus, NOR 16MiB   */
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+
+		devbus-bootcs {
+			status = "okay";
+
+			/* Device Bus parameters are required */
+
+			/* Read parameters */
+			devbus,bus-width    = <8>;
+			devbus,turn-off-ps  = <60000>;
+			devbus,badr-skew-ps = <0>;
+			devbus,acc-first-ps = <124000>;
+			devbus,acc-next-ps  = <248000>;
+			devbus,rd-setup-ps  = <0>;
+			devbus,rd-hold-ps   = <0>;
+
+			/* Write parameters */
+			devbus,sync-enable = <0>;
+			devbus,wr-high-ps  = <60000>;
+			devbus,wr-low-ps   = <60000>;
+			devbus,ale-wr-ps   = <60000>;
+
+			/* NOR 16 MiB */
+			nor@0 {
+				compatible = "cfi-flash";
+				reg = <0 0x1000000>;
+				bank-width = <2>;
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			/*
+			 * All 6 slots are physically present as
+			 * standard PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@2,0 {
+				/* Port 0, Lane 1 */
+				status = "okay";
+			};
+			pcie@3,0 {
+				/* Port 0, Lane 2 */
+				status = "okay";
+			};
+			pcie@4,0 {
+				/* Port 0, Lane 3 */
+				status = "okay";
+			};
+			pcie@9,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+			};
+			pcie@10,0 {
+				/* Port 3, Lane 0 */
+				status = "okay";
+			};
+		};
 
 		internal-regs {
 			serial@12000 {
@@ -127,68 +188,6 @@
 					spi-max-frequency = <20000000>;
 				};
 			};
-
-			pcie-controller {
-				status = "okay";
-
-				/*
-				 * All 6 slots are physically present as
-				 * standard PCIe slots on the board.
-				 */
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-				pcie@2,0 {
-					/* Port 0, Lane 1 */
-					status = "okay";
-				};
-				pcie@3,0 {
-					/* Port 0, Lane 2 */
-					status = "okay";
-				};
-				pcie@4,0 {
-					/* Port 0, Lane 3 */
-					status = "okay";
-				};
-				pcie@9,0 {
-					/* Port 2, Lane 0 */
-					status = "okay";
-				};
-				pcie@10,0 {
-					/* Port 3, Lane 0 */
-					status = "okay";
-				};
-			};
-
-			devbus-bootcs@10400 {
-				status = "okay";
-				ranges = <0 0xf0000000 0x1000000>;
-
-				/* Device Bus parameters are required */
-
-				/* Read parameters */
-				devbus,bus-width    = <8>;
-				devbus,turn-off-ps  = <60000>;
-				devbus,badr-skew-ps = <0>;
-				devbus,acc-first-ps = <124000>;
-				devbus,acc-next-ps  = <248000>;
-				devbus,rd-setup-ps  = <0>;
-				devbus,rd-hold-ps   = <0>;
-
-				/* Write parameters */
-				devbus,sync-enable = <0>;
-				devbus,wr-high-ps  = <60000>;
-				devbus,wr-low-ps   = <60000>;
-				devbus,ale-wr-ps   = <60000>;
-
-				/* NOR 16 MiB */
-				nor@0 {
-					compatible = "cfi-flash";
-					reg = <0 0x1000000>;
-					bank-width = <2>;
-				};
-			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index c87b2de..2298e4a 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -14,7 +14,7 @@
  */
 
 /dts-v1/;
-/include/ "armada-xp-mv78460.dtsi"
+#include "armada-xp-mv78460.dtsi"
 
 / {
 	model = "Marvell Armada XP Development Board DB-MV784MP-GP";
@@ -39,9 +39,58 @@
 	};
 
 	soc {
-		ranges = <0          0 0xd0000000 0x100000  /* Internal registers 1MiB */
-			  0xe0000000 0 0xe0000000 0x8100000 /* PCIe */
-			  0xf0000000 0 0xf0000000 0x1000000 /* Device Bus, NOR 16MiB  */>;
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+
+		devbus-bootcs {
+			status = "okay";
+
+			/* Device Bus parameters are required */
+
+			/* Read parameters */
+			devbus,bus-width    = <8>;
+			devbus,turn-off-ps  = <60000>;
+			devbus,badr-skew-ps = <0>;
+			devbus,acc-first-ps = <124000>;
+			devbus,acc-next-ps  = <248000>;
+			devbus,rd-setup-ps  = <0>;
+			devbus,rd-hold-ps   = <0>;
+
+			/* Write parameters */
+			devbus,sync-enable = <0>;
+			devbus,wr-high-ps  = <60000>;
+			devbus,wr-low-ps   = <60000>;
+			devbus,ale-wr-ps   = <60000>;
+
+			/* NOR 16 MiB */
+			nor@0 {
+				compatible = "cfi-flash";
+				reg = <0 0x1000000>;
+				bank-width = <2>;
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			/*
+			 * The 3 slots are physically present as
+			 * standard PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@9,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+			};
+			pcie@10,0 {
+				/* Port 3, Lane 0 */
+				status = "okay";
+			};
+		};
 
 		internal-regs {
 			serial@12000 {
@@ -126,56 +175,6 @@
 					spi-max-frequency = <108000000>;
 				};
 			};
-
-			devbus-bootcs@10400 {
-				status = "okay";
-				ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf000000, size 0x1000000 */
-
-				/* Device Bus parameters are required */
-
-				/* Read parameters */
-				devbus,bus-width    = <8>;
-				devbus,turn-off-ps  = <60000>;
-				devbus,badr-skew-ps = <0>;
-				devbus,acc-first-ps = <124000>;
-				devbus,acc-next-ps  = <248000>;
-				devbus,rd-setup-ps  = <0>;
-				devbus,rd-hold-ps   = <0>;
-
-				/* Write parameters */
-				devbus,sync-enable = <0>;
-				devbus,wr-high-ps  = <60000>;
-				devbus,wr-low-ps   = <60000>;
-				devbus,ale-wr-ps   = <60000>;
-
-				/* NOR 16 MiB */
-				nor@0 {
-					compatible = "cfi-flash";
-					reg = <0 0x1000000>;
-					bank-width = <2>;
-				};
-			};
-
-			pcie-controller {
-				status = "okay";
-
-				/*
-				 * The 3 slots are physically present as
-				 * standard PCIe slots on the board.
-				 */
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-				pcie@9,0 {
-					/* Port 2, Lane 0 */
-					status = "okay";
-				};
-				pcie@10,0 {
-					/* Port 3, Lane 0 */
-					status = "okay";
-				};
-			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts
new file mode 100644
index 0000000..e47c49e
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-matrix.dts
@@ -0,0 +1,75 @@
+/*
+ * Device Tree file for Marvell Armada XP Matrix board
+ *
+ * Copyright (C) 2013 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "armada-xp-mv78460.dtsi"
+
+/ {
+	model = "Marvell Armada XP Matrix Board";
+	compatible = "marvell,axp-matrix", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x80000000>; /* 2 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			serial@12000 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+			serial@12100 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+			serial@12200 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+			serial@12300 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy-mode = "sgmii";
+			};
+
+			pcie-controller {
+				status = "okay";
+
+				pcie@1,0 {
+					/* Port 0, Lane 0 */
+					status = "okay";
+				};
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index f8eaa383..3f5e612 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -13,7 +13,7 @@
  * common to all Armada XP SoCs.
  */
 
-/include/ "armada-xp.dtsi"
+#include "armada-xp.dtsi"
 
 / {
 	model = "Marvell Armada XP MV78230 SoC";
@@ -44,6 +44,125 @@
 	};
 
 	soc {
+		/*
+		 * MV78230 has 2 PCIe units Gen2.0: One unit can be
+		 * configured as x4 or quad x1 lanes. One unit is
+		 * x4/x1.
+		 */
+		pcie-controller {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0       MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0       MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0       MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0       MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+				0x82000000 0x9 0       MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+				0x81000000 0x9 0       MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 58>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 59>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 60>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+			};
+
+			pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 61>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			pcie@9,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+				reg = <0x4800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 99>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+			};
+		};
+
 		internal-regs {
 			pinctrl {
 				compatible = "marvell,mv78230-pinctrl";
@@ -63,7 +182,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupts-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupts = <82>, <83>, <84>, <85>;
 			};
 
@@ -74,113 +193,9 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupts-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupts = <87>, <88>, <89>;
 			};
-
-			/*
-			 * MV78230 has 2 PCIe units Gen2.0: One unit can be
-			 * configured as x4 or quad x1 lanes. One unit is
-			 * x4/x1.
-			 */
-			pcie-controller {
-				compatible = "marvell,armada-xp-pcie";
-				status = "disabled";
-				device_type = "pci";
-
-#address-cells = <3>;
-#size-cells = <2>;
-
-				bus-range = <0x00 0xff>;
-
-				ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
-					0x82000000 0 0x42000 0x42000 0 0x00002000   /* Port 2.0 registers */
-					0x82000000 0 0x44000 0x44000 0 0x00002000   /* Port 0.1 registers */
-					0x82000000 0 0x48000 0x48000 0 0x00002000   /* Port 0.2 registers */
-					0x82000000 0 0x4c000 0x4c000 0 0x00002000   /* Port 0.3 registers */
-					0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
-					0x81000000 0 0	  0xe8000000 0 0x00100000>; /* downstream I/O */
-
-				pcie@1,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-					reg = <0x0800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 58>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 5>;
-					status = "disabled";
-				};
-
-				pcie@2,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-					reg = <0x1000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 59>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <1>;
-					clocks = <&gateclk 6>;
-					status = "disabled";
-				};
-
-				pcie@3,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-					reg = <0x1800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 60>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <2>;
-					clocks = <&gateclk 7>;
-					status = "disabled";
-				};
-
-				pcie@4,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
-					reg = <0x2000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 61>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <3>;
-					clocks = <&gateclk 8>;
-					status = "disabled";
-				};
-
-				pcie@9,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-					reg = <0x4800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 99>;
-					marvell,pcie-port = <2>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 26>;
-					status = "disabled";
-				};
-			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 2d9335d..3e9fd13 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -13,7 +13,7 @@
  * common to all Armada XP SoCs.
  */
 
-/include/ "armada-xp.dtsi"
+#include "armada-xp.dtsi"
 
 / {
 	model = "Marvell Armada XP MV78260 SoC";
@@ -45,6 +45,146 @@
 	};
 
 	soc {
+		/*
+		 * MV78260 has 3 PCIe units Gen2.0: Two units can be
+		 * configured as x4 or quad x1 lanes. One unit is
+		 * x4/x1.
+		 */
+		pcie-controller {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
+				0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000   /* Port 3.0 registers */
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+				0x82000000 0x9 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x9 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
+				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
+				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 58>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+                                ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+                                          0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 59>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 60>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+			};
+
+			pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 61>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			pcie@9,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+				reg = <0x4800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 99>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+			};
+
+			pcie@10,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
+				reg = <0x5000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
+					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 103>;
+				marvell,pcie-port = <3>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 27>;
+				status = "disabled";
+			};
+		};
+
 		internal-regs {
 			pinctrl {
 				compatible = "marvell,mv78260-pinctrl";
@@ -64,7 +204,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupts-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupts = <82>, <83>, <84>, <85>;
 			};
 
@@ -75,7 +215,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupts-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupts = <87>, <88>, <89>, <90>;
 			};
 
@@ -86,7 +226,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupts-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupts = <91>;
 			};
 
@@ -97,128 +237,6 @@
 				clocks = <&gateclk 1>;
 				status = "disabled";
 			};
-
-			/*
-			 * MV78260 has 3 PCIe units Gen2.0: Two units can be
-			 * configured as x4 or quad x1 lanes. One unit is
-			 * x4/x1.
-			 */
-			pcie-controller {
-				compatible = "marvell,armada-xp-pcie";
-				status = "disabled";
-				device_type = "pci";
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-
-				bus-range = <0x00 0xff>;
-
-				ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
-					0x82000000 0 0x42000 0x42000 0 0x00002000   /* Port 2.0 registers */
-					0x82000000 0 0x44000 0x44000 0 0x00002000   /* Port 0.1 registers */
-					0x82000000 0 0x48000 0x48000 0 0x00002000   /* Port 0.2 registers */
-					0x82000000 0 0x4c000 0x4c000 0 0x00002000   /* Port 0.3 registers */
-					0x82000000 0 0x80000 0x80000 0 0x00002000   /* Port 1.0 registers */
-					0x82000000 0 0x82000 0x82000 0 0x00002000   /* Port 3.0 registers */
-					0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
-					0x81000000 0 0	  0xe8000000 0 0x00100000>; /* downstream I/O */
-
-				pcie@1,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-					reg = <0x0800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 58>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 5>;
-					status = "disabled";
-				};
-
-				pcie@2,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-					reg = <0x1000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 59>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <1>;
-					clocks = <&gateclk 6>;
-					status = "disabled";
-				};
-
-				pcie@3,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-					reg = <0x1800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 60>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <2>;
-					clocks = <&gateclk 7>;
-					status = "disabled";
-				};
-
-				pcie@4,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
-					reg = <0x2000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 61>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <3>;
-					clocks = <&gateclk 8>;
-					status = "disabled";
-				};
-
-				pcie@9,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-					reg = <0x4800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 99>;
-					marvell,pcie-port = <2>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 26>;
-					status = "disabled";
-				};
-
-				pcie@10,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
-					reg = <0x5000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 103>;
-					marvell,pcie-port = <3>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 27>;
-					status = "disabled";
-				};
-			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index c7b1f4d..31ba6d8 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -13,7 +13,7 @@
  * common to all Armada XP SoCs.
  */
 
-/include/ "armada-xp.dtsi"
+#include "armada-xp.dtsi"
 
 / {
 	model = "Marvell Armada XP MV78460 SoC";
@@ -61,6 +61,228 @@
 	};
 
 	soc {
+		/*
+		 * MV78460 has 4 PCIe units Gen2.0: Two units can be
+		 * configured as x4 or quad x1 lanes. Two units are
+		 * x4/x1.
+		 */
+		pcie-controller {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
+				0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000   /* Port 3.0 registers */
+				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
+				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
+				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+
+				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
+				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
+				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
+				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
+
+				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */
+
+				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
+				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 58>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 59>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 60>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+			};
+
+			pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 61>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			pcie@5,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 62>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+
+			pcie@6,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
+				reg = <0x3000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 63>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 10>;
+				status = "disabled";
+			};
+
+			pcie@7,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
+				reg = <0x3800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 64>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 11>;
+				status = "disabled";
+			};
+
+			pcie@8,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
+				reg = <0x4000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 65>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 12>;
+				status = "disabled";
+			};
+
+			pcie@9,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
+				reg = <0x4800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 99>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+			};
+
+			pcie@10,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
+				reg = <0x5000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
+					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 103>;
+				marvell,pcie-port = <3>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 27>;
+				status = "disabled";
+			};
+		};
+
 		internal-regs {
 			pinctrl {
 				compatible = "marvell,mv78460-pinctrl";
@@ -80,7 +302,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupts-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupts = <82>, <83>, <84>, <85>;
 			};
 
@@ -91,7 +313,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupts-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupts = <87>, <88>, <89>, <90>;
 			};
 
@@ -102,7 +324,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
-				#interrupts-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupts = <91>;
 			};
 
@@ -113,194 +335,6 @@
 				clocks = <&gateclk 1>;
 				status = "disabled";
 			};
-
-			/*
-			 * MV78460 has 4 PCIe units Gen2.0: Two units can be
-			 * configured as x4 or quad x1 lanes. Two units are
-			 * x4/x1.
-			 */
-			pcie-controller {
-				compatible = "marvell,armada-xp-pcie";
-				status = "disabled";
-				device_type = "pci";
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-
-				bus-range = <0x00 0xff>;
-
-				ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
-					0x82000000 0 0x42000 0x42000 0 0x00002000   /* Port 2.0 registers */
-					0x82000000 0 0x44000 0x44000 0 0x00002000   /* Port 0.1 registers */
-					0x82000000 0 0x48000 0x48000 0 0x00002000   /* Port 0.2 registers */
-					0x82000000 0 0x4c000 0x4c000 0 0x00002000   /* Port 0.3 registers */
-					0x82000000 0 0x80000 0x80000 0 0x00002000   /* Port 1.0 registers */
-					0x82000000 0 0x82000 0x82000 0 0x00002000   /* Port 3.0 registers */
-					0x82000000 0 0x84000 0x84000 0 0x00002000   /* Port 1.1 registers */
-					0x82000000 0 0x88000 0x88000 0 0x00002000   /* Port 1.2 registers */
-					0x82000000 0 0x8c000 0x8c000 0 0x00002000   /* Port 1.3 registers */
-					0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
-					0x81000000 0 0	  0xe8000000 0 0x00100000>; /* downstream I/O */
-
-				pcie@1,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-					reg = <0x0800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 58>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 5>;
-					status = "disabled";
-				};
-
-				pcie@2,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
-					reg = <0x1000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 59>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <1>;
-					clocks = <&gateclk 6>;
-					status = "disabled";
-				};
-
-				pcie@3,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
-					reg = <0x1800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 60>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <2>;
-					clocks = <&gateclk 7>;
-					status = "disabled";
-				};
-
-				pcie@4,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
-					reg = <0x2000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 61>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <3>;
-					clocks = <&gateclk 8>;
-					status = "disabled";
-				};
-
-				pcie@5,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
-					reg = <0x2800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 62>;
-					marvell,pcie-port = <1>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 9>;
-					status = "disabled";
-				};
-
-				pcie@6,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
-					reg = <0x3000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 63>;
-					marvell,pcie-port = <1>;
-					marvell,pcie-lane = <1>;
-					clocks = <&gateclk 10>;
-					status = "disabled";
-				};
-
-				pcie@7,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
-					reg = <0x3800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 64>;
-					marvell,pcie-port = <1>;
-					marvell,pcie-lane = <2>;
-					clocks = <&gateclk 11>;
-					status = "disabled";
-				};
-
-				pcie@8,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
-					reg = <0x4000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 65>;
-					marvell,pcie-port = <1>;
-					marvell,pcie-lane = <3>;
-					clocks = <&gateclk 12>;
-					status = "disabled";
-				};
-				pcie@9,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
-					reg = <0x4800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 99>;
-					marvell,pcie-port = <2>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 26>;
-					status = "disabled";
-				};
-
-				pcie@10,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
-					reg = <0x5000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 103>;
-					marvell,pcie-port = <3>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 27>;
-					status = "disabled";
-				};
-			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 8f51045..5695afc 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -11,7 +11,7 @@
  */
 
 /dts-v1/;
-/include/ "armada-xp-mv78260.dtsi"
+#include "armada-xp-mv78260.dtsi"
 
 / {
 	model = "PlatHome OpenBlocks AX3-4 board";
@@ -27,9 +27,46 @@
 	};
 
 	soc {
-		ranges = <0          0 0xd0000000 0x100000	/* Internal registers 1MiB */
-			  0xe0000000 0 0xe0000000 0x8100000     /* PCIe */
-			  0xf0000000 0 0xf0000000 0x8000000     /* Device Bus, NOR 128MiB   */>;
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>;
+
+		devbus-bootcs {
+			status = "okay";
+
+			/* Device Bus parameters are required */
+
+			/* Read parameters */
+			devbus,bus-width    = <8>;
+			devbus,turn-off-ps  = <60000>;
+			devbus,badr-skew-ps = <0>;
+			devbus,acc-first-ps = <124000>;
+			devbus,acc-next-ps  = <248000>;
+			devbus,rd-setup-ps  = <0>;
+			devbus,rd-hold-ps   = <0>;
+
+			/* Write parameters */
+			devbus,sync-enable = <0>;
+			devbus,wr-high-ps  = <60000>;
+			devbus,wr-low-ps   = <60000>;
+			devbus,ale-wr-ps   = <60000>;
+
+			/* NOR 128 MiB */
+			nor@0 {
+				compatible = "cfi-flash";
+				reg = <0 0x8000000>;
+				bank-width = <2>;
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+			/* Internal mini-PCIe connector */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+		};
 
 		internal-regs {
 			serial@12000 {
@@ -148,49 +185,6 @@
 			usb@51000 {
 				status = "okay";
 			};
-
-			/* USB interface in the mini-PCIe connector */
-			usb@52000 {
-				status = "okay";
-			};
-
-			devbus-bootcs@10400 {
-				status = "okay";
-				ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */
-
-				/* Device Bus parameters are required */
-
-				/* Read parameters */
-				devbus,bus-width    = <8>;
-				devbus,turn-off-ps  = <60000>;
-				devbus,badr-skew-ps = <0>;
-				devbus,acc-first-ps = <124000>;
-				devbus,acc-next-ps  = <248000>;
-				devbus,rd-setup-ps  = <0>;
-				devbus,rd-hold-ps   = <0>;
-
-				/* Write parameters */
-				devbus,sync-enable = <0>;
-				devbus,wr-high-ps  = <60000>;
-				devbus,wr-low-ps   = <60000>;
-				devbus,ale-wr-ps   = <60000>;
-
-				/* NOR 128 MiB */
-				nor@0 {
-					compatible = "cfi-flash";
-					reg = <0 0x8000000>;
-					bank-width = <2>;
-				};
-			};
-
-			pcie-controller {
-				status = "okay";
-				/* Internal mini-PCIe connector */
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 416eb94..281c644 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -16,7 +16,7 @@
  * common to all Armada SoCs.
  */
 
-/include/ "armada-370-xp.dtsi"
+#include "armada-370-xp.dtsi"
 
 / {
 	model = "Marvell Armada XP family SoC";
@@ -27,6 +27,13 @@
 	};
 
 	soc {
+		compatible = "marvell,armadaxp-mbus", "simple-bus";
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+		};
+
 		internal-regs {
 			L2: l2-cache {
 				compatible = "marvell,aurora-system-cache";
@@ -62,7 +69,9 @@
 			};
 
 			timer@20300 {
-				marvell,timer-25Mhz;
+				compatible = "marvell,armada-xp-timer";
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
 			};
 
 			coreclk: mvebu-sar@18230 {
@@ -138,6 +147,16 @@
 				};
 			};
 
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x100>;
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+				reg = <0x11100 0x100>;
+			};
+
 			usb@50000 {
 				clocks = <&gateclk 18>;
 			};
@@ -162,4 +181,13 @@
 			};
 		};
 	};
+
+	clocks {
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index 92b9e21..f770655 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -120,6 +120,7 @@
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				pinctrl-names = "default";
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/at91rm9200_pqfp.dtsi b/arch/arm/boot/dts/at91rm9200_pqfp.dtsi
new file mode 100644
index 0000000..93ca66f
--- /dev/null
+++ b/arch/arm/boot/dts/at91rm9200_pqfp.dtsi
@@ -0,0 +1,17 @@
+/*
+ * at91rm9200_pqfp.dtsi - Device Tree Include file for AT91RM9200 PQFP family SoC
+ *
+ * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include "at91rm9200.dtsi"
+
+/ {
+	compatible = "atmel,at91rm9200-pqfp", "atmel,at91rm9200";
+};
+
+&pioD {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index c7ccbcb..56ee828 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -572,6 +572,7 @@
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				pinctrl-names = "default";
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 1373546..cb2c010 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -96,7 +96,6 @@
 			};
 
 			spi0: spi@fffc8000 {
-				status = "okay";
 				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
 				mtd_dataflash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi
index b4ec6fe..17b8799 100644
--- a/arch/arm/boot/dts/at91sam9g25.dtsi
+++ b/arch/arm/boot/dts/at91sam9g25.dtsi
@@ -7,6 +7,8 @@
  */
 
 #include "at91sam9x5.dtsi"
+#include "at91sam9x5_usart3.dtsi"
+#include "at91sam9x5_macb0.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G25 SoC";
diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi
index bebf9f5..e35c2fc 100644
--- a/arch/arm/boot/dts/at91sam9g35.dtsi
+++ b/arch/arm/boot/dts/at91sam9g35.dtsi
@@ -7,6 +7,7 @@
  */
 
 #include "at91sam9x5.dtsi"
+#include "at91sam9x5_macb0.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G35 SoC";
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index bb7f564..6224f9f 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -291,6 +291,22 @@
 					};
 				};
 
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE
+							 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+				};
+
 				tcb0 {
 					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
 						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
@@ -421,6 +437,9 @@
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xf0010000 0x4000>;
 				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma 0 AT91_DMA_CFG_PER_ID(21)>,
+				       <&dma 0 AT91_DMA_CFG_PER_ID(22)>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disabled";
@@ -471,6 +490,8 @@
 				dma-names = "tx", "rx";
 				#address-cells = <1>;
 				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0>;
 				status = "disabled";
 			};
 
@@ -483,6 +504,8 @@
 				dma-names = "tx", "rx";
 				#address-cells = <1>;
 				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index 3d77dbe..e9487f6 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -38,8 +38,26 @@
 				status = "okay";
 			};
 
+			ssc0: ssc@f0010000 {
+				status = "okay";
+			};
+
 			i2c0: i2c@f8010000 {
 				status = "okay";
+
+				wm8904: codec@1a {
+					compatible = "wm8904";
+					reg = <0x1a>;
+				};
+
+				qt1070: keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioA>;
+					interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+				};
 			};
 
 			i2c1: i2c@f8014000 {
@@ -66,6 +84,20 @@
 							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PA7 gpio CD pin pull up and deglitch */
 					};
 				};
+
+				qt1070 {
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+
+				sound {
+					pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
 			};
 
 			spi0: spi@f0000000 {
@@ -121,9 +153,27 @@
 
 		enter {
 			label = "Enter";
-			gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
+			gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
 			gpio-key,wakeup;
 		};
 	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+		atmel,model = "wm8904 @ AT91SAM9N12";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+	};
 };
diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi
index 49e94ab..c255421 100644
--- a/arch/arm/boot/dts/at91sam9x25.dtsi
+++ b/arch/arm/boot/dts/at91sam9x25.dtsi
@@ -7,6 +7,9 @@
  */
 
 #include "at91sam9x5.dtsi"
+#include "at91sam9x5_usart3.dtsi"
+#include "at91sam9x5_macb0.dtsi"
+#include "at91sam9x5_macb1.dtsi"
 
 / {
 	model = "Atmel AT91SAM9X25 SoC";
@@ -22,27 +25,6 @@
 				       0x80000000 0xfffd0000 0xb83fffff  /* pioC */
 				       0x003fffff 0x003f8000 0x00000000  /* pioD */
 				      >;
-
-				macb1 {
-					pinctrl_macb1_rmii: macb1_rmii-0 {
-						atmel,pins =
-							<AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC16 periph B */
-							 AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC18 periph B */
-							 AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC19 periph B */
-							 AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC20 periph B */
-							 AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC21 periph B */
-							 AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC27 periph B */
-							 AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC28 periph B */
-							 AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC29 periph B */
-							 AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC30 periph B */
-							 AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC31 periph B */
-					};
-				};
-			};
-
-			macb1: ethernet@f8030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb1_rmii>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi
index 1a3d525..8eac66c 100644
--- a/arch/arm/boot/dts/at91sam9x35.dtsi
+++ b/arch/arm/boot/dts/at91sam9x35.dtsi
@@ -7,6 +7,7 @@
  */
 
 #include "at91sam9x5.dtsi"
+#include "at91sam9x5_macb0.dtsi"
 
 / {
 	model = "Atmel AT91SAM9X35 SoC";
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 57d45f5..40267a1 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -190,12 +190,12 @@
 							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA8 periph A */
 					};
 
-					pinctrl_uart2_rts: uart2_rts-0 {
+					pinctrl_usart2_rts: usart2_rts-0 {
 						atmel,pins =
 							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
 					};
 
-					pinctrl_uart2_cts: uart2_cts-0 {
+					pinctrl_usart2_cts: usart2_cts-0 {
 						atmel,pins =
 							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
 					};
@@ -206,29 +206,6 @@
 					};
 				};
 
-				usart3 {
-					pinctrl_usart3: usart3-0 {
-						atmel,pins =
-							<AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PC22 periph B with pullup */
-							 AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC23 periph B */
-					};
-
-					pinctrl_usart3_rts: usart3_rts-0 {
-						atmel,pins =
-							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC24 periph B */
-					};
-
-					pinctrl_usart3_cts: usart3_cts-0 {
-						atmel,pins =
-							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC25 periph B */
-					};
-
-					pinctrl_usart3_sck: usart3_sck-0 {
-						atmel,pins =
-							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC26 periph B */
-					};
-				};
-
 				uart0 {
 					pinctrl_uart0: uart0-0 {
 						atmel,pins =
@@ -277,34 +254,6 @@
 					};
 				};
 
-				macb0 {
-					pinctrl_macb0_rmii: macb0_rmii-0 {
-						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
-							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
-							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
-							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
-							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
-							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
-							 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
-							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
-							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
-							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
-					};
-
-					pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
-						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB8 periph A */
-							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A */
-							 AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A */
-							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A */
-							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A */
-							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A */
-							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A */
-							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB17 periph A */
-					};
-				};
-
 				mmc0 {
 					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
 						atmel,pins =
@@ -542,6 +491,9 @@
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xf0010000 0x4000>;
 				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(13)>,
+				       <&dma0 1 AT91_DMA_CFG_PER_ID(14)>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disabled";
@@ -553,6 +505,7 @@
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
+				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -564,6 +517,7 @@
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
+				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -605,22 +559,6 @@
 				status = "disabled";
 			};
 
-			macb0: ethernet@f802c000 {
-				compatible = "cdns,at32ap7000-macb", "cdns,macb";
-				reg = <0xf802c000 0x100>;
-				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb0_rmii>;
-				status = "disabled";
-			};
-
-			macb1: ethernet@f8030000 {
-				compatible = "cdns,at32ap7000-macb", "cdns,macb";
-				reg = <0xf8030000 0x100>;
-				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
-				status = "disabled";
-			};
-
 			i2c0: i2c@f8010000 {
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf8010000 0x100>;
diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
new file mode 100644
index 0000000..55731ff
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
@@ -0,0 +1,56 @@
+/*
+ * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
+ * Ethernet interface.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				macb0 {
+					pinctrl_macb0_rmii: macb0_rmii-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
+							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
+							 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
+					};
+
+					pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB8 periph A */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A */
+							 AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A */
+							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A */
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB17 periph A */
+					};
+				};
+			};
+
+			macb0: ethernet@f802c000 {
+				compatible = "cdns,at32ap7000-macb", "cdns,macb";
+				reg = <0xf802c000 0x100>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
new file mode 100644
index 0000000..77425a6
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
@@ -0,0 +1,44 @@
+/*
+ * at91sam9x5_macb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 2
+ * Ethernet interfaces.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				macb1 {
+					pinctrl_macb1_rmii: macb1_rmii-0 {
+						atmel,pins =
+							<AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC16 periph B */
+							 AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC18 periph B */
+							 AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC19 periph B */
+							 AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC20 periph B */
+							 AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC21 periph B */
+							 AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC27 periph B */
+							 AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC28 periph B */
+							 AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC29 periph B */
+							 AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC30 periph B */
+							 AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC31 periph B */
+					};
+				};
+			};
+
+			macb1: ethernet@f8030000 {
+				compatible = "cdns,at32ap7000-macb", "cdns,macb";
+				reg = <0xf8030000 0x100>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
new file mode 100644
index 0000000..2347e95
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
@@ -0,0 +1,51 @@
+/*
+ * at91sam9x5_usart3.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * 4 USART.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PC22 periph B with pullup */
+							 AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC23 periph B */
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC24 periph B */
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC25 periph B */
+					};
+
+					pinctrl_usart3_sck: usart3_sck-0 {
+						atmel,pins =
+							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC26 periph B */
+					};
+				};
+			};
+
+			usart3: serial@f8028000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8028000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
index 49e3c45..3a9f6fa 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -59,6 +59,11 @@
 
 			i2c0: i2c@f8010000 {
 				status = "okay";
+
+				wm8731: wm8731@1a {
+					compatible = "wm8731";
+					reg = <0x1a>;
+				};
 			};
 
 			pinctrl@fffff400 {
@@ -90,6 +95,10 @@
 			watchdog@fffffe40 {
 				status = "okay";
 			};
+
+			ssc0: ssc@f0010000 {
+				status = "okay";
+			};
 		};
 
 		usb0: ohci@00600000 {
@@ -105,4 +114,19 @@
 			status = "okay";
 		};
 	};
+
+	sound {
+		compatible = "atmel,sam9x5-wm8731-audio";
+
+		atmel,model = "wm8731 @ AT91SAM9X5EK";
+
+		atmel,audio-routing =
+			"Headphone Jack", "RHPOUT",
+			"Headphone Jack", "LHPOUT",
+			"LLINEIN", "Line In Jack",
+			"RLINEIN", "Line In Jack";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8731>;
+	};
 };
diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi
index a0f2721..a49032c 100644
--- a/arch/arm/boot/dts/atlas6.dtsi
+++ b/arch/arm/boot/dts/atlas6.dtsi
@@ -65,6 +65,11 @@
 				compatible = "sirf,prima2-rsc";
 				reg = <0x88020000 0x1000>;
 			};
+
+			cphifbg@88030000 {
+				compatible = "sirf,prima2-cphifbg";
+				reg = <0x88030000 0x1000>;
+			};
 		};
 
 		mem-iobg {
@@ -75,10 +80,17 @@
 
 			memory-controller@90000000 {
 				compatible = "sirf,prima2-memc";
-				reg = <0x90000000 0x10000>;
+				reg = <0x90000000 0x2000>;
 				interrupts = <27>;
 				clocks = <&clks 5>;
 			};
+
+			memc-monitor {
+				compatible = "sirf,prima2-memcmon";
+				reg = <0x90002000 0x200>;
+				interrupts = <4>;
+				clocks = <&clks 32>;
+			};
 		};
 
 		disp-iobg {
@@ -120,6 +132,20 @@
 			};
 		};
 
+		graphics2d-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xa0000000 0xa0000000 0x8000000>;
+
+			ble@a0000000 {
+				compatible = "sirf,atlas6-ble";
+				reg = <0xa0000000 0x2000>;
+				interrupts = <5>;
+				clocks = <&clks 33>;
+			};
+		};
+
 		dsp-iobg {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -181,6 +207,8 @@
 				interrupts = <17>;
 				fifosize = <128>;
 				clocks = <&clks 13>;
+				sirf,uart-dma-rx-channel = <21>;
+				sirf,uart-dma-tx-channel = <2>;
 			};
 
 			uart1: uart@b0060000 {
@@ -199,6 +227,8 @@
 				interrupts = <19>;
 				fifosize = <128>;
 				clocks = <&clks 15>;
+				sirf,uart-dma-rx-channel = <6>;
+				sirf,uart-dma-tx-channel = <7>;
 			};
 
 			usp0: usp@b0080000 {
@@ -206,7 +236,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0080000 0x10000>;
 				interrupts = <20>;
+				fifosize = <128>;
 				clocks = <&clks 28>;
+				sirf,usp-dma-rx-channel = <17>;
+				sirf,usp-dma-tx-channel = <18>;
 			};
 
 			usp1: usp@b0090000 {
@@ -214,7 +247,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0090000 0x10000>;
 				interrupts = <21>;
+				fifosize = <128>;
 				clocks = <&clks 29>;
+				sirf,usp-dma-rx-channel = <14>;
+				sirf,usp-dma-tx-channel = <15>;
 			};
 
 			dmac0: dma-controller@b00b0000 {
@@ -237,6 +273,8 @@
 				compatible = "sirf,prima2-vip";
 				reg = <0xb00C0000 0x10000>;
 				clocks = <&clks 31>;
+				interrupts = <14>;
+				sirf,vip-dma-rx-channel = <16>;
 			};
 
 			spi0: spi@b00d0000 {
@@ -259,6 +297,11 @@
 				compatible = "sirf,prima2-spi";
 				reg = <0xb0170000 0x10000>;
 				interrupts = <16>;
+				sirf,spi-num-chipselects = <1>;
+				sirf,spi-dma-rx-channel = <12>;
+				sirf,spi-dma-tx-channel = <13>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&clks 20>;
 				status = "disabled";
 			};
@@ -329,6 +372,12 @@
 						sirf,function = "uart0";
 					};
 				};
+				uart0_noflow_pins_a: uart0@1 {
+					uart {
+						sirf,pins = "uart0_nostreamctrlgrp";
+						sirf,function = "uart0_nostreamctrl";
+					};
+				};
 				uart1_pins_a: uart1@0 {
 					uart {
 						sirf,pins = "uart1grp";
diff --git a/arch/arm/boot/dts/bcm11351-brt.dts b/arch/arm/boot/dts/bcm11351-brt.dts
index 67ec524..23cd16d 100644
--- a/arch/arm/boot/dts/bcm11351-brt.dts
+++ b/arch/arm/boot/dts/bcm11351-brt.dts
@@ -17,7 +17,7 @@
 
 / {
 	model = "BCM11351 BRT board";
-	compatible = "bcm,bcm11351-brt", "bcm,bcm11351";
+	compatible = "brcm,bcm11351-brt", "brcm,bcm11351";
 
 	memory {
 		reg = <0x80000000 0x40000000>; /* 1 GB */
@@ -27,19 +27,20 @@
 		status = "okay";
 	};
 
-	sdio0: sdio@0x3f180000 {
+	sdio1: sdio@3f180000 {
 		max-frequency = <48000000>;
 		status = "okay";
 	};
 
-	sdio1: sdio@0x3f190000 {
+	sdio2: sdio@3f190000 {
 		non-removable;
 		max-frequency = <48000000>;
 		status = "okay";
 	};
 
-	sdio3: sdio@0x3f1b0000 {
+	sdio4: sdio@3f1b0000 {
 		max-frequency = <48000000>;
+		cd-gpios = <&gpio 14 0>;
 		status = "okay";
 	};
 
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index c0cdf66..b0c0610 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2012 Broadcom Corporation
+ * Copyright (C) 2012-2013 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -18,7 +18,7 @@
 
 / {
 	model = "BCM11351 SoC";
-	compatible = "bcm,bcm11351";
+	compatible = "brcm,bcm11351";
 	interrupt-parent = <&gic>;
 
 	chosen {
@@ -35,12 +35,12 @@
 	};
 
 	smc@0x3404c000 {
-		compatible = "bcm,bcm11351-smc", "bcm,kona-smc";
+		compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
 		reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
 	};
 
 	uart@3e000000 {
-		compatible = "bcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e000000 0x1000>;
 		clock-frequency = <13000000>;
@@ -49,45 +49,96 @@
 		reg-io-width = <4>;
 	};
 
+	uart@3e001000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e001000 0x1000>;
+		clock-frequency = <13000000>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	uart@3e002000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e002000 0x1000>;
+		clock-frequency = <13000000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	uart@3e003000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e003000 0x1000>;
+		clock-frequency = <13000000>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
 	L2: l2-cache {
-		compatible = "bcm,bcm11351-a2-pl310-cache";
+		compatible = "brcm,bcm11351-a2-pl310-cache";
 		reg = <0x3ff20000 0x1000>;
 		cache-unified;
 		cache-level = <2>;
 	};
 
+	watchdog@35002f40 {
+		compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt";
+		reg = <0x35002f40 0x6c>;
+	};
+
 	timer@35006000 {
-		compatible = "bcm,kona-timer";
+		compatible = "brcm,kona-timer";
 		reg = <0x35006000 0x1000>;
 		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <32768>;
 	};
 
-	sdio0: sdio@0x3f180000 {
-		compatible = "bcm,kona-sdhci";
+	gpio: gpio@35003000 {
+		compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio";
+		reg = <0x35003000 0x800>;
+		interrupts =
+		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+	};
+
+	sdio1: sdio@3f180000 {
+		compatible = "brcm,kona-sdhci";
 		reg = <0x3f180000 0x10000>;
-		interrupts = <0x0 77 0x4>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
 
-	sdio1: sdio@0x3f190000 {
-		compatible = "bcm,kona-sdhci";
+	sdio2: sdio@3f190000 {
+		compatible = "brcm,kona-sdhci";
 		reg = <0x3f190000 0x10000>;
-		interrupts = <0x0 76 0x4>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
 
-	sdio2: sdio@0x3f1a0000 {
-		compatible = "bcm,kona-sdhci";
+	sdio3: sdio@3f1a0000 {
+		compatible = "brcm,kona-sdhci";
 		reg = <0x3f1a0000 0x10000>;
-		interrupts = <0x0 74 0x4>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
 
-	sdio3: sdio@0x3f1b0000 {
-		compatible = "bcm,kona-sdhci";
+	sdio4: sdio@3f1b0000 {
+		compatible = "brcm,kona-sdhci";
 		reg = <0x3f1b0000 0x10000>;
-		interrupts = <0x0 73 0x4>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};
 
diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
new file mode 100644
index 0000000..08e47c2
--- /dev/null
+++ b/arch/arm/boot/dts/bcm28155-ap.dts
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "bcm11351.dtsi"
+
+/ {
+	model = "BCM28155 AP board";
+	compatible = "brcm,bcm28155-ap", "brcm,bcm11351";
+
+	memory {
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	uart@3e000000 {
+		status = "okay";
+	};
+
+	sdio1: sdio@3f180000 {
+		max-frequency = <48000000>;
+		status = "okay";
+	};
+
+	sdio2: sdio@3f190000 {
+		non-removable;
+		max-frequency = <48000000>;
+		status = "okay";
+	};
+
+	sdio4: sdio@3f1b0000 {
+		max-frequency = <48000000>;
+		cd-gpios = <&gpio 14 0>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/ccu8540.dts b/arch/arm/boot/dts/ccu8540.dts
deleted file mode 100644
index 48ff034..0000000
--- a/arch/arm/boot/dts/ccu8540.dts
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright 2013 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "dbx5x0.dtsi"
-
-/ {
-	model = "ST-Ericsson U8540 platform with Device Tree";
-	compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
-
-	memory@0 {
-		reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
-	};
-
-	soc {
-		prcmu@80157000 {
-			reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x3000>;
-			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
-		};
-
-		uart@80120000 {
-			status = "okay";
-		};
-
-		uart@80121000 {
-			status = "okay";
-		};
-
-		uart@80007000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 5bce7cc..588ce58 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -90,6 +90,17 @@
 				};
 			};
 		};
+		mdio: mdio@1e24000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mdio_pins>;
+			bus_freq = <2200000>;
+		};
+		eth0: ethernet@1e20000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mii_pins>;
+		};
 	};
 	nand_cs3@62000000 {
 		status = "okay";
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index d70ba55..8d17346 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -125,11 +125,33 @@
 					0x14 0x00000010 0x000000f0
 				>;
 			};
+			mdio_pins: pinmux_mdio_pins {
+				pinctrl-single,bits = <
+					/* MDIO_CLK, MDIO_D */
+					0x10 0x00000088 0x000000ff
+				>;
+			};
+			mii_pins: pinmux_mii_pins {
+				pinctrl-single,bits = <
+					/*
+					 * MII_TXEN, MII_TXCLK, MII_COL
+					 * MII_TXD_3, MII_TXD_2, MII_TXD_1
+					 * MII_TXD_0
+					 */
+					0x8 0x88888880 0xfffffff0
+					/*
+					 * MII_RXER, MII_CRS, MII_RXCLK
+					 * MII_RXDV, MII_RXD_3, MII_RXD_2
+					 * MII_RXD_1, MII_RXD_0
+					 */
+					0xc 0x88888888 0xffffffff
+				>;
+			};
+
 		};
 		serial0: serial@1c42000 {
 			compatible = "ns16550a";
 			reg = <0x42000 0x100>;
-			clock-frequency = <150000000>;
 			reg-shift = <2>;
 			interrupts = <25>;
 			status = "disabled";
@@ -137,7 +159,6 @@
 		serial1: serial@1d0c000 {
 			compatible = "ns16550a";
 			reg = <0x10c000 0x100>;
-			clock-frequency = <150000000>;
 			reg-shift = <2>;
 			interrupts = <53>;
 			status = "disabled";
@@ -145,7 +166,6 @@
 		serial2: serial@1d0d000 {
 			compatible = "ns16550a";
 			reg = <0x10d000 0x100>;
-			clock-frequency = <150000000>;
 			reg-shift = <2>;
 			interrupts = <61>;
 			status = "disabled";
@@ -216,6 +236,26 @@
 			interrupts = <56>;
 			status = "disabled";
 		};
+		mdio: mdio@1e24000 {
+			compatible = "ti,davinci_mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x224000 0x1000>;
+		};
+		eth0: ethernet@1e20000 {
+			compatible = "ti,davinci-dm6467-emac";
+			reg = <0x220000 0x4000>;
+			ti,davinci-ctrl-reg-offset = <0x3000>;
+			ti,davinci-ctrl-mod-reg-offset = <0x2000>;
+			ti,davinci-ctrl-ram-offset = <0>;
+			ti,davinci-ctrl-ram-size = <0x2000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <33
+					34
+					35
+					36
+					>;
+		};
 	};
 	nand_cs3@62000000 {
 		compatible = "ti,davinci-nand";
diff --git a/arch/arm/boot/dts/dove-cm-a510.dts b/arch/arm/boot/dts/dove-cm-a510.dts
index 61a8062..50c0d69 100644
--- a/arch/arm/boot/dts/dove-cm-a510.dts
+++ b/arch/arm/boot/dts/dove-cm-a510.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "dove.dtsi"
+#include "dove.dtsi"
 
 / {
 	model = "Compulab CM-A510";
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index 5cae2ab..8349a24 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "dove.dtsi"
+#include "dove.dtsi"
 
 / {
 	model = "SolidRun CuBox";
@@ -42,6 +42,8 @@
 			regulator-always-on;
 			regulator-boot-on;
 			gpio = <&gpio0 1 0>;
+			pinctrl-0 = <&pmx_gpio_1>;
+			pinctrl-names = "default";
 		};
 	};
 
@@ -53,10 +55,24 @@
 			clock-frequency = <25000000>;
 		};
 	};
+
+	ir_recv: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 19 1>;
+		pinctrl-0 = <&pmx_gpio_19>;
+		pinctrl-names = "default";
+	};
 };
 
 &uart0 { status = "okay"; };
 &sata0 { status = "okay"; };
+&mdio { status = "okay"; };
+&eth { status = "okay"; };
+
+&ethphy {
+	compatible = "marvell,88e1310";
+	reg = <1>;
+};
 
 &i2c0 {
 	status = "okay";
@@ -83,18 +99,12 @@
 			silabs,pll-master;
 		};
 
-		clkout1 {
-			reg = <1>;
-			silabs,drive-strength = <8>;
-			silabs,multisynth-source = <1>;
-			silabs,clock-source = <0>;
-			silabs,pll-master;
-		};
-
 		clkout2 {
 			reg = <2>;
+			silabs,drive-strength = <8>;
 			silabs,multisynth-source = <1>;
 			silabs,clock-source = <0>;
+			silabs,pll-master;
 		};
 	};
 };
@@ -103,6 +113,7 @@
 	status = "okay";
 	/* sdio0 card detect is connected to wrong pin on CuBox */
 	cd-gpios = <&gpio0 12 1>;
+	pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>;
 };
 
 &spi0 {
@@ -116,22 +127,10 @@
 	};
 };
 
-&pinctrl {
-	pinctrl-0 = <&pmx_gpio_1 &pmx_gpio_12>;
+&audio1 {
+	status = "okay";
+	clocks = <&gate_clk 13>, <&si5351 2>;
+	clock-names = "internal", "extclk";
+	pinctrl-0 = <&pmx_audio1_i2s1_spdifo &pmx_audio1_extclk>;
 	pinctrl-names = "default";
-
-	pmx_gpio_1: pmx-gpio-1 {
-		marvell,pins = "mpp1";
-		marvell,function = "gpio";
-	};
-
-	pmx_gpio_12: pmx-gpio-12 {
-		marvell,pins = "mpp12";
-		marvell,function = "gpio";
-	};
-
-	pmx_gpio_18: pmx-gpio-18 {
-		marvell,pins = "mpp18";
-		marvell,function = "gpio";
-	};
 };
diff --git a/arch/arm/boot/dts/dove-d2plug.dts b/arch/arm/boot/dts/dove-d2plug.dts
new file mode 100644
index 0000000..c11d363
--- /dev/null
+++ b/arch/arm/boot/dts/dove-d2plug.dts
@@ -0,0 +1,69 @@
+/dts-v1/;
+
+#include "dove.dtsi"
+
+/ {
+	model = "Globalscale D2Plug";
+	compatible = "globalscale,d2plug", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
+		pinctrl-names = "default";
+
+		wlan-ap {
+			label = "wlan-ap";
+			gpios = <&gpio0 0 1>;
+		};
+
+		wlan-act {
+			label = "wlan-act";
+			gpios = <&gpio0 1 1>;
+		};
+
+		bluetooth-act {
+			label = "bt-act";
+			gpios = <&gpio0 2 1>;
+		};
+	};
+};
+
+&uart0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&i2c0 { status = "okay"; };
+&mdio { status = "okay"; };
+&eth { status = "okay"; };
+
+/* Samsung M8G2F eMMC */
+&sdio0 {
+	status = "okay";
+	non-removable;
+	bus-width = <4>;
+};
+
+/* Marvell SD8787 WLAN/BT */
+&sdio1 {
+	status = "okay";
+	non-removable;
+	bus-width = <4>;
+};
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Macronix MX25L3205D */
+	spi-flash@0 {
+		compatible = "st,m25l3205d";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/dove-d3plug.dts b/arch/arm/boot/dts/dove-d3plug.dts
new file mode 100644
index 0000000..f5f59bb
--- /dev/null
+++ b/arch/arm/boot/dts/dove-d3plug.dts
@@ -0,0 +1,103 @@
+/dts-v1/;
+
+#include "dove.dtsi"
+
+/ {
+	model = "Globalscale D3Plug";
+	compatible = "globalscale,d3plug", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
+		pinctrl-names = "default";
+
+		wlan-act {
+			label = "wlan-act";
+			gpios = <&gpio0 0 1>;
+		};
+
+		wlan-ap {
+			label = "wlan-ap";
+			gpios = <&gpio0 1 1>;
+		};
+
+		status {
+			label = "status";
+			gpios = <&gpio0 2 1>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 8 0>;
+			pinctrl-0 = <&pmx_gpio_8>;
+			pinctrl-names = "default";
+		};
+	};
+};
+
+&uart0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&i2c0 { status = "okay"; };
+
+/* Samsung M8G2F eMMC */
+&sdio0 {
+	status = "okay";
+	non-removable;
+	bus-width = <4>;
+};
+
+/* Marvell SD8787 WLAN/BT */
+&sdio1 {
+	status = "okay";
+	non-removable;
+};
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 2M Flash Macronix MX25L1605D */
+	spi-flash@0 {
+		compatible = "st,m25l1605d";
+		spi-max-frequency = <86000000>;
+		reg = <0>;
+	};
+};
+
+&pcie {
+	status = "okay";
+	/* Fresco Logic USB3.0 xHCI controller */
+	pcie-port@0 {
+		status = "okay";
+		reset-gpios = <&gpio0 26 1>;
+		reset-delay-us = <20000>;
+		pinctrl-0 = <&pmx_camera_gpio>;
+		pinctrl-names = "default";
+	};
+	/* Mini-PCIe slot */
+	pcie-port@1 {
+		status = "okay";
+		reset-gpios = <&gpio0 25 1>;
+	};
+};
diff --git a/arch/arm/boot/dts/dove-dove-db.dts b/arch/arm/boot/dts/dove-dove-db.dts
index e5a920b..bb725dc 100644
--- a/arch/arm/boot/dts/dove-dove-db.dts
+++ b/arch/arm/boot/dts/dove-dove-db.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "dove.dtsi"
+#include "dove.dtsi"
 
 / {
 	model = "Marvell DB-MV88AP510-BP Development Board";
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 6cab468..113a8bc 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -1,8 +1,11 @@
 /include/ "skeleton.dtsi"
 
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
 / {
 	compatible = "marvell,dove";
 	model = "Marvell Armada 88AP510 SoC";
+	interrupt-parent = <&intc>;
 
 	aliases {
 		gpio0 = &gpio0;
@@ -10,252 +13,593 @@
 		gpio2 = &gpio2;
 	};
 
-	soc@f1000000 {
-		compatible = "simple-bus";
+	cpus {
 		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-parent = <&intc>;
-
-		ranges = <0xc8000000 0xc8000000 0x0100000   /* CESA SRAM   1M */
-		          0xe0000000 0xe0000000 0x8000000   /* PCIe0 Mem 128M */
-		          0xe8000000 0xe8000000 0x8000000   /* PCIe1 Mem 128M */
-		          0xf0000000 0xf0000000 0x0100000   /* ScratchPad  1M */
-		          0x00000000 0xf1000000 0x1000000   /* SB/NB regs 16M */
-		          0xf2000000 0xf2000000 0x0100000   /* PCIe0 I/O   1M */
-		          0xf2100000 0xf2100000 0x0100000   /* PCIe0 I/O   1M */
-		          0xf8000000 0xf8000000 0x8000000>; /* BootROM   128M */
-
-		l2: l2-cache {
-			compatible = "marvell,tauros2-cache";
-			marvell,tauros2-cache-features = <0>;
-		};
+		#size-cells = <0>;
 
-		intc: interrupt-controller {
-			compatible = "marvell,orion-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x20204 0x04>, <0x20214 0x04>;
+		cpu0: cpu@0 {
+			compatible = "marvell,pj4a", "marvell,sheeva-v7";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <0>;
 		};
+	};
 
-		core_clk: core-clocks@d0214 {
-			compatible = "marvell,dove-core-clock";
-			reg = <0xd0214 0x4>;
-			#clock-cells = <1>;
-		};
+	l2: l2-cache {
+		compatible = "marvell,tauros2-cache";
+		marvell,tauros2-cache-features = <0>;
+	};
 
-		gate_clk: clock-gating-control@d0038 {
-			compatible = "marvell,dove-gating-clock";
-			reg = <0xd0038 0x4>;
-			clocks = <&core_clk 0>;
-			#clock-cells = <1>;
-		};
+	mbus {
+		compatible = "marvell,dove-mbus", "marvell,mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256M MEM space */
+		pcie-io-aperture  = <0xf2000000 0x00200000>; /*   2M I/O space */
+
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x0100000   /* MBUS regs  1M */
+			  MBUS_ID(0xf0, 0x02) 0 0xf1800000 0x1000000   /* AXI  regs 16M */
+			  MBUS_ID(0x01, 0xfd) 0 0xf8000000 0x8000000   /* BootROM  128M */
+			  MBUS_ID(0x03, 0x01) 0 0xc8000000 0x0100000   /* CESA SRAM  1M */
+			  MBUS_ID(0x0d, 0x00) 0 0xf0000000 0x0100000>; /* PMU  SRAM  1M */
+
+		pcie: pcie-controller {
+			compatible = "marvell,dove-pcie";
+			status = "disabled";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&intc>;
+			bus-range = <0x00 0xff>;
+
+			ranges = <0x82000000 0x0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x2000
+			          0x82000000 0x0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x2000
+				  0x82000000 0x1 0x0 MBUS_ID(0x04, 0xe8) 0 1 0   /* Port 0.0 Mem */
+				  0x81000000 0x1 0x0 MBUS_ID(0x04, 0xe0) 0 1 0   /* Port 0.0 I/O */
+				  0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0   /* Port 1.0 Mem */
+				  0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */
+
+			pcie-port@0 {
+				device_type = "pci";
+				status = "disabled";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				clocks = <&gate_clk 4>;
+				marvell,pcie-port = <0>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+				          0x81000000 0 0 0x81000000 0x1 0 1 0>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 16>;
+			};
 
-		thermal: thermal@d001c {
-			compatible = "marvell,dove-thermal";
-			reg = <0xd001c 0x0c>, <0xd005c 0x08>;
+			pcie-port@1 {
+				device_type = "pci";
+				status = "disabled";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				clocks = <&gate_clk 5>;
+				marvell,pcie-port = <1>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+				          0x81000000 0 0 0x81000000 0x2 0 1 0>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 18>;
+			};
 		};
 
-		uart0: serial@12000 {
-			compatible = "ns16550a";
-			reg = <0x12000 0x100>;
-			reg-shift = <2>;
-			interrupts = <7>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 MBUS_ID(0xf0, 0x01) 0 0x0100000   /* MBUS regs  1M */
+				  0x00800000 MBUS_ID(0xf0, 0x02) 0 0x1000000   /* AXI  regs 16M */
+				  0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800   /* CESA SRAM  2k */
+				  0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU  SRAM  2k */
+
+			mbusc: mbus-ctrl@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x80>, <0x800100 0x8>;
+			};
 
-		uart1: serial@12100 {
-			compatible = "ns16550a";
-			reg = <0x12100 0x100>;
-			reg-shift = <2>;
-			interrupts = <8>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
+			timer: timer@20300 {
+				compatible = "marvell,orion-timer";
+				reg = <0x20300 0x20>;
+				interrupt-parent = <&bridge_intc>;
+				interrupts = <1>, <2>;
+				clocks = <&core_clk 0>;
+			};
 
-		uart2: serial@12200 {
-			compatible = "ns16550a";
-			reg = <0x12000 0x100>;
-			reg-shift = <2>;
-			interrupts = <9>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
+			intc: main-interrupt-ctrl@20200 {
+				compatible = "marvell,orion-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x20200 0x10>, <0x20210 0x10>;
+			};
 
-		uart3: serial@12300 {
-			compatible = "ns16550a";
-			reg = <0x12100 0x100>;
-			reg-shift = <2>;
-			interrupts = <10>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
+			bridge_intc: bridge-interrupt-ctrl@20110 {
+				compatible = "marvell,orion-bridge-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x20110 0x8>;
+				interrupts = <0>;
+				marvell,#interrupts = <5>;
+			};
 
-		gpio0: gpio@d0400 {
-			compatible = "marvell,orion-gpio";
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0xd0400 0x20>;
-			ngpios = <32>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <12>, <13>, <14>, <60>;
-		};
+			core_clk: core-clocks@d0214 {
+				compatible = "marvell,dove-core-clock";
+				reg = <0xd0214 0x4>;
+				#clock-cells = <1>;
+			};
 
-		gpio1: gpio@d0420 {
-			compatible = "marvell,orion-gpio";
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0xd0420 0x20>;
-			ngpios = <32>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <61>;
-		};
+			gate_clk: clock-gating-ctrl@d0038 {
+				compatible = "marvell,dove-gating-clock";
+				reg = <0xd0038 0x4>;
+				clocks = <&core_clk 0>;
+				#clock-cells = <1>;
+			};
 
-		gpio2: gpio@e8400 {
-			compatible = "marvell,orion-gpio";
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0xe8400 0x0c>;
-			ngpios = <8>;
-		};
+			thermal: thermal-diode@d001c {
+				compatible = "marvell,dove-thermal";
+				reg = <0xd001c 0x0c>, <0xd005c 0x08>;
+			};
 
-		pinctrl: pinctrl@d0200 {
-			compatible = "marvell,dove-pinctrl";
-			reg = <0xd0200 0x10>;
-			clocks = <&gate_clk 22>;
-		};
+			uart0: serial@12000 {
+				compatible = "ns16550a";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <7>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
 
-		spi0: spi@10600 {
-			compatible = "marvell,orion-spi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			interrupts = <6>;
-			reg = <0x10600 0x28>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
+			uart1: serial@12100 {
+				compatible = "ns16550a";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <8>;
+				clocks = <&core_clk 0>;
+				pinctrl-0 = <&pmx_uart1>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
 
-		spi1: spi@14600 {
-			compatible = "marvell,orion-spi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			interrupts = <5>;
-			reg = <0x14600 0x28>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
+			uart2: serial@12200 {
+				compatible = "ns16550a";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <9>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
 
-		i2c0: i2c@11000 {
-			compatible = "marvell,mv64xxx-i2c";
-			reg = <0x11000 0x20>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <11>;
-			clock-frequency = <400000>;
-			timeout-ms = <1000>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
+			uart3: serial@12300 {
+				compatible = "ns16550a";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <10>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
 
-		ehci0: usb-host@50000 {
-			compatible = "marvell,orion-ehci";
-			reg = <0x50000 0x1000>;
-			interrupts = <24>;
-			clocks = <&gate_clk 0>;
-			status = "okay";
-		};
+			gpio0: gpio-ctrl@d0400 {
+				compatible = "marvell,orion-gpio";
+				#gpio-cells = <2>;
+				gpio-controller;
+				reg = <0xd0400 0x20>;
+				ngpios = <32>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <12>, <13>, <14>, <60>;
+			};
 
-		ehci1: usb-host@51000 {
-			compatible = "marvell,orion-ehci";
-			reg = <0x51000 0x1000>;
-			interrupts = <25>;
-			clocks = <&gate_clk 1>;
-			status = "okay";
-		};
+			gpio1: gpio-ctrl@d0420 {
+				compatible = "marvell,orion-gpio";
+				#gpio-cells = <2>;
+				gpio-controller;
+				reg = <0xd0420 0x20>;
+				ngpios = <32>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <61>;
+			};
 
-		sdio0: sdio@92000 {
-			compatible = "marvell,dove-sdhci";
-			reg = <0x92000 0x100>;
-			interrupts = <35>, <37>;
-			clocks = <&gate_clk 8>;
-			status = "disabled";
-		};
+			gpio2: gpio-ctrl@e8400 {
+				compatible = "marvell,orion-gpio";
+				#gpio-cells = <2>;
+				gpio-controller;
+				reg = <0xe8400 0x0c>;
+				ngpios = <8>;
+			};
 
-		sdio1: sdio@90000 {
-			compatible = "marvell,dove-sdhci";
-			reg = <0x90000 0x100>;
-			interrupts = <36>, <38>;
-			clocks = <&gate_clk 9>;
-			status = "disabled";
-		};
+			pinctrl: pin-ctrl@d0200 {
+				compatible = "marvell,dove-pinctrl";
+				reg = <0xd0200 0x10>;
+				clocks = <&gate_clk 22>;
+
+				pmx_gpio_0: pmx-gpio-0 {
+					marvell,pins = "mpp0";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_1: pmx-gpio-1 {
+					marvell,pins = "mpp1";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_2: pmx-gpio-2 {
+					marvell,pins = "mpp2";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_3: pmx-gpio-3 {
+					marvell,pins = "mpp3";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_4: pmx-gpio-4 {
+					marvell,pins = "mpp4";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_5: pmx-gpio-5 {
+					marvell,pins = "mpp5";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_6: pmx-gpio-6 {
+					marvell,pins = "mpp6";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_7: pmx-gpio-7 {
+					marvell,pins = "mpp7";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_8: pmx-gpio-8 {
+					marvell,pins = "mpp8";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_9: pmx-gpio-9 {
+					marvell,pins = "mpp9";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_10: pmx-gpio-10 {
+					marvell,pins = "mpp10";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_11: pmx-gpio-11 {
+					marvell,pins = "mpp11";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_12: pmx-gpio-12 {
+					marvell,pins = "mpp12";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_13: pmx-gpio-13 {
+					marvell,pins = "mpp13";
+					marvell,function = "gpio";
+				};
+
+				pmx_audio1_extclk: pmx-audio1-extclk {
+					marvell,pins = "mpp13";
+					marvell,function = "audio1";
+				};
+
+				pmx_gpio_14: pmx-gpio-14 {
+					marvell,pins = "mpp14";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_15: pmx-gpio-15 {
+					marvell,pins = "mpp15";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_16: pmx-gpio-16 {
+					marvell,pins = "mpp16";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_17: pmx-gpio-17 {
+					marvell,pins = "mpp17";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_18: pmx-gpio-18 {
+					marvell,pins = "mpp18";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_19: pmx-gpio-19 {
+					marvell,pins = "mpp19";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_20: pmx-gpio-20 {
+					marvell,pins = "mpp20";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_21: pmx-gpio-21 {
+					marvell,pins = "mpp21";
+					marvell,function = "gpio";
+				};
+
+				pmx_camera: pmx-camera {
+					marvell,pins = "mpp_camera";
+					marvell,function = "camera";
+				};
+
+				pmx_camera_gpio: pmx-camera-gpio {
+					marvell,pins = "mpp_camera";
+					marvell,function = "gpio";
+				};
+
+				pmx_sdio0: pmx-sdio0 {
+					marvell,pins = "mpp_sdio0";
+					marvell,function = "sdio0";
+				};
+
+				pmx_sdio0_gpio: pmx-sdio0-gpio {
+					marvell,pins = "mpp_sdio0";
+					marvell,function = "gpio";
+				};
+
+				pmx_sdio1: pmx-sdio1 {
+					marvell,pins = "mpp_sdio1";
+					marvell,function = "sdio1";
+				};
+
+				pmx_sdio1_gpio: pmx-sdio1-gpio {
+					marvell,pins = "mpp_sdio1";
+					marvell,function = "gpio";
+				};
+
+				pmx_audio1_gpio: pmx-audio1-gpio {
+					marvell,pins = "mpp_audio1";
+					marvell,function = "gpio";
+				};
+
+				pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo {
+					marvell,pins = "mpp_audio1";
+					marvell,function = "i2s1/spdifo";
+				};
+
+				pmx_spi0: pmx-spi0 {
+					marvell,pins = "mpp_spi0";
+					marvell,function = "spi0";
+				};
+
+				pmx_spi0_gpio: pmx-spi0-gpio {
+					marvell,pins = "mpp_spi0";
+					marvell,function = "gpio";
+				};
+
+				pmx_uart1: pmx-uart1 {
+					marvell,pins = "mpp_uart1";
+					marvell,function = "uart1";
+				};
+
+				pmx_uart1_gpio: pmx-uart1-gpio {
+					marvell,pins = "mpp_uart1";
+					marvell,function = "gpio";
+				};
+
+				pmx_nand: pmx-nand {
+					marvell,pins = "mpp_nand";
+					marvell,function = "nand";
+				};
+
+				pmx_nand_gpo: pmx-nand-gpo {
+					marvell,pins = "mpp_nand";
+					marvell,function = "gpo";
+				};
+			};
 
-		sata0: sata@a0000 {
-			compatible = "marvell,orion-sata";
-			reg = <0xa0000 0x2400>;
-			interrupts = <62>;
-			clocks = <&gate_clk 3>;
-			nr-ports = <1>;
-			status = "disabled";
-		};
+			spi0: spi-ctrl@10600 {
+				compatible = "marvell,orion-spi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <6>;
+				reg = <0x10600 0x28>;
+				clocks = <&core_clk 0>;
+				pinctrl-0 = <&pmx_spi0>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
 
-		rtc@d8500 {
-			compatible = "marvell,orion-rtc";
-			reg = <0xd8500 0x20>;
-		};
+			spi1: spi-ctrl@14600 {
+				compatible = "marvell,orion-spi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				interrupts = <5>;
+				reg = <0x14600 0x28>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
 
-		crypto: crypto@30000 {
-			compatible = "marvell,orion-crypto";
-			reg = <0x30000 0x10000>,
-			      <0xc8000000 0x800>;
-			reg-names = "regs", "sram";
-			interrupts = <31>;
-			clocks = <&gate_clk 15>;
-			status = "okay";
-		};
+			i2c0: i2c-ctrl@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <11>;
+				clock-frequency = <400000>;
+				timeout-ms = <1000>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
 
-		xor0: dma-engine@60800 {
-			compatible = "marvell,orion-xor";
-			reg = <0x60800 0x100
-			       0x60a00 0x100>;
-			clocks = <&gate_clk 23>;
-			status = "okay";
+			ehci0: usb-host@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x50000 0x1000>;
+				interrupts = <24>;
+				clocks = <&gate_clk 0>;
+				status = "okay";
+			};
 
-			channel0 {
-				interrupts = <39>;
-				dmacap,memcpy;
-				dmacap,xor;
+			ehci1: usb-host@51000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x51000 0x1000>;
+				interrupts = <25>;
+				clocks = <&gate_clk 1>;
+				status = "okay";
 			};
 
-			channel1 {
-				interrupts = <40>;
-				dmacap,memset;
-				dmacap,memcpy;
-				dmacap,xor;
+			sdio0: sdio-host@92000 {
+				compatible = "marvell,dove-sdhci";
+				reg = <0x92000 0x100>;
+				interrupts = <35>, <37>;
+				clocks = <&gate_clk 8>;
+				pinctrl-0 = <&pmx_sdio0>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			sdio1: sdio-host@90000 {
+				compatible = "marvell,dove-sdhci";
+				reg = <0x90000 0x100>;
+				interrupts = <36>, <38>;
+				clocks = <&gate_clk 9>;
+				pinctrl-0 = <&pmx_sdio1>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			sata0: sata-host@a0000 {
+				compatible = "marvell,orion-sata";
+				reg = <0xa0000 0x2400>;
+				interrupts = <62>;
+				clocks = <&gate_clk 3>;
+				nr-ports = <1>;
+				status = "disabled";
+			};
+
+			rtc: real-time-clock@d8500 {
+				compatible = "marvell,orion-rtc";
+				reg = <0xd8500 0x20>;
 			};
-		};
 
-		xor1: dma-engine@60900 {
-			compatible = "marvell,orion-xor";
-			reg = <0x60900 0x100
-			       0x60b00 0x100>;
-			clocks = <&gate_clk 24>;
-			status = "okay";
+			crypto: crypto-engine@30000 {
+				compatible = "marvell,orion-crypto";
+				reg = <0x30000 0x10000>,
+				      <0xffffe000 0x800>;
+				reg-names = "regs", "sram";
+				interrupts = <31>;
+				clocks = <&gate_clk 15>;
+				status = "okay";
+			};
+
+			xor0: dma-engine@60800 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60a00 0x100>;
+				clocks = <&gate_clk 23>;
+				status = "okay";
+
+				channel0 {
+					interrupts = <39>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+
+				channel1 {
+					interrupts = <40>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+			};
+
+			xor1: dma-engine@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gate_clk 24>;
+				status = "okay";
+
+				channel0 {
+					interrupts = <42>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+
+				channel1 {
+					interrupts = <43>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+			};
+
+			mdio: mdio-bus@72004 {
+				compatible = "marvell,orion-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72004 0x84>;
+				interrupts = <30>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+
+				ethphy: ethernet-phy {
+					device-type = "ethernet-phy";
+					/* set phy address in board file */
+				};
+			};
+
+			eth: ethernet-ctrl@72000 {
+				compatible = "marvell,orion-eth";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72000 0x4000>;
+				clocks = <&gate_clk 2>;
+				marvell,tx-checksum-limit = <1600>;
+				status = "disabled";
+
+				ethernet-port@0 {
+					device_type = "network";
+					compatible = "marvell,orion-eth-port";
+					reg = <0>;
+					interrupts = <29>;
+					/* overwrite MAC address in bootloader */
+					local-mac-address = [00 00 00 00 00 00];
+					phy-handle = <&ethphy>;
+				};
+			};
 
-			channel0 {
-				interrupts = <42>;
-				dmacap,memcpy;
-				dmacap,xor;
+			audio0: audio-controller@b0000 {
+				compatible = "marvell,dove-audio";
+				reg = <0xb0000 0x2210>;
+				interrupts = <19>, <20>;
+				clocks = <&gate_clk 12>;
+				clock-names = "internal";
+				status = "disabled";
 			};
 
-			channel1 {
-				interrupts = <43>;
-				dmacap,memset;
-				dmacap,memcpy;
-				dmacap,xor;
+			audio1: audio-controller@b4000 {
+				compatible = "marvell,dove-audio";
+				reg = <0xb4000 0x2210>;
+				interrupts = <21>, <22>;
+				clocks = <&gate_clk 13>;
+				clock-names = "internal";
+				status = "disabled";
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
new file mode 100644
index 0000000..5babba0
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -0,0 +1,275 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra7.dtsi"
+
+/ {
+	model = "TI DRA7";
+	compatible = "ti,dra7-evm", "ti,dra752", "ti,dra7";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x60000000>; /* 1536 MB */
+	};
+
+	mmc2_3v3: fixedregulator-mmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc2_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&dra7_pmx_core {
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
+			0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			0x408 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */
+			0x40c (PIN_INPUT | MUX_MODE0) /* i2c2_scl */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			0x410 (PIN_INPUT | MUX_MODE0) /* i2c3_sda */
+			0x414 (PIN_INPUT | MUX_MODE0) /* i2c3_scl */
+		>;
+	};
+
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			0x3a4 (PIN_INPUT | MUX_MODE0) /* spi2_clk */
+			0x3a8 (PIN_INPUT | MUX_MODE0) /* spi2_d1 */
+			0x3ac (PIN_INPUT | MUX_MODE0) /* spi2_d0 */
+			0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
+			0x3b4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs1 */
+			0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs2 */
+			0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs3 */
+		>;
+	};
+
+	mcspi2_pins: pinmux_mcspi2_pins {
+		pinctrl-single,pins = <
+			0x3c0 (PIN_INPUT | MUX_MODE0) /* spi2_sclk */
+			0x3c4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
+			0x3c8 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
+			0x3cc (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			0x3e0 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
+			0x3e4 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
+			0x3e8 (PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
+			0x3ec (PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			0x3f0 (PIN_INPUT | MUX_MODE0) /* uart2_rxd */
+			0x3f4 (PIN_INPUT | MUX_MODE0) /* uart2_txd */
+			0x3f8 (PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
+			0x3fc (PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
+			0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
+		>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+
+	tps659038: tps659038@58 {
+		compatible = "ti,tps659038";
+		reg = <0x58>;
+
+		tps659038_pmic {
+			compatible = "ti,tps659038-pmic";
+
+			regulators {
+				smps123_reg: smps123 {
+					/* VDD_MPU */
+					regulator-name = "smps123";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_DSPEVE */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_GPU - over VDD_SMPS6 */
+					regulator-name = "smps6";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <12500000>;
+					regulator-boot-on;
+				};
+
+				smps7_reg: smps7 {
+					/* CORE_VDD */
+					regulator-name = "smps7";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1030000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps8_reg: smps8 {
+					/* VDD_IVAHD */
+					regulator-name = "smps8";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-boot-on;
+				};
+
+				smps9_reg: smps9 {
+					/* VDDS1V8 */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo1_reg: ldo1 {
+					/* LDO1_OUT --> SDIO  */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VDD_RTCIO */
+					/* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDDA_1V8_PHY */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+				};
+
+				ldo9_reg: ldo9 {
+					/* VDD_RTC */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <3400000>;
+};
+
+&mcspi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+};
+
+&mcspi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi2_pins>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&ldo1_reg>;
+	bus-width = <4>;
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&mmc2_3v3>;
+	bus-width = <8>;
+};
+
+&cpu0 {
+	cpu0-supply = <&smps123_reg>;
+};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
new file mode 100644
index 0000000..d0df4c4
--- /dev/null
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -0,0 +1,586 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * Based on "omap4.dtsi"
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/dra.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	compatible = "ti,dra7xx";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		i2c4 = &i2c5;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+
+			operating-points = <
+				/* kHz    uV */
+				1000000	1060000
+				1176000	1160000
+				>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	gic: interrupt-controller@48211000 {
+		compatible = "arm,cortex-a15-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x48211000 0x1000>,
+		      <0x48212000 0x1000>,
+		      <0x48214000 0x2000>,
+		      <0x48216000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is uses for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap5-mpu";
+			ti,hwmods = "mpu";
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the SOC interconnect.
+	 * The real OMAP interconnect network is quite complex.
+	 * Since that will not bring real advantage to represent that in DT for
+	 * the moment, just use a fake OCP bus entry to represent the whole bus
+	 * hierarchy.
+	 */
+	ocp {
+		compatible = "ti,omap4-l3-noc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main_1", "l3_main_2";
+		reg = <0x44000000 0x2000>,
+		      <0x44800000 0x3000>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+		counter32k: counter@4ae04000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x4ae04000 0x40>;
+			ti,hwmods = "counter_32k";
+		};
+
+		dra7_pmx_core: pinmux@4a003400 {
+			compatible = "pinctrl-single";
+			reg = <0x4a003400 0x0464>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x3fffffff>;
+		};
+
+		sdma: dma-controller@4a056000 {
+			compatible = "ti,omap4430-sdma";
+			reg = <0x4a056000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			#dma-channels = <32>;
+			#dma-requests = <127>;
+		};
+
+		gpio1: gpio@4ae10000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x4ae10000 0x200>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio1";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio2: gpio@48055000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48055000 0x200>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio2";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio3: gpio@48057000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48057000 0x200>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio3";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio4: gpio@48059000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48059000 0x200>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio4";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio5: gpio@4805b000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x4805b000 0x200>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio5";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio6: gpio@4805d000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x4805d000 0x200>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio6";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio7: gpio@48051000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48051000 0x200>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio7";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio8: gpio@48053000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48053000 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio8";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		uart1: serial@4806a000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x4806a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart1";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart2: serial@4806c000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x4806c000 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart2";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart3: serial@48020000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48020000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart3";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart4: serial@4806e000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x4806e000 0x100>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart4";
+			clock-frequency = <48000000>;
+                        status = "disabled";
+		};
+
+		uart5: serial@48066000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48066000 0x100>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart5";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart6: serial@48068000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48068000 0x100>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart6";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart7: serial@48420000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48420000 0x100>;
+			ti,hwmods = "uart7";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart8: serial@48422000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48422000 0x100>;
+			ti,hwmods = "uart8";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart9: serial@48424000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48424000 0x100>;
+			ti,hwmods = "uart9";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart10: serial@4ae2b000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x4ae2b000 0x100>;
+			ti,hwmods = "uart10";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		timer1: timer@4ae18000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4ae18000 0x80>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@48032000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48032000 0x80>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48034000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48034000 0x80>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@48036000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48036000 0x80>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@48820000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48820000 0x80>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+		};
+
+		timer6: timer@48822000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48822000 0x80>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+			ti,timer-pwm;
+		};
+
+		timer7: timer@48824000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48824000 0x80>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@48826000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48826000 0x80>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer8";
+			ti,timer-dsp;
+			ti,timer-pwm;
+		};
+
+		timer9: timer@4803e000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4803e000 0x80>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer9";
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48086000 0x80>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer10";
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48088000 0x80>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
+
+		timer13: timer@48828000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48828000 0x80>;
+			ti,hwmods = "timer13";
+			status = "disabled";
+		};
+
+		timer14: timer@4882a000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4882a000 0x80>;
+			ti,hwmods = "timer14";
+			status = "disabled";
+		};
+
+		timer15: timer@4882c000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4882c000 0x80>;
+			ti,hwmods = "timer15";
+			status = "disabled";
+		};
+
+		timer16: timer@4882e000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4882e000 0x80>;
+			ti,hwmods = "timer16";
+			status = "disabled";
+		};
+
+		wdt2: wdt@4ae14000 {
+			compatible = "ti,omap4-wdt";
+			reg = <0x4ae14000 0x80>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "wd_timer2";
+		};
+
+		i2c1: i2c@48070000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48070000 0x100>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c1";
+			status = "disabled";
+		};
+
+		i2c2: i2c@48072000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48072000 0x100>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c2";
+			status = "disabled";
+		};
+
+		i2c3: i2c@48060000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48060000 0x100>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c3";
+			status = "disabled";
+		};
+
+		i2c4: i2c@4807a000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x4807a000 0x100>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c4";
+			status = "disabled";
+		};
+
+		i2c5: i2c@4807c000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x4807c000 0x100>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c5";
+			status = "disabled";
+		};
+
+		mmc1: mmc@4809c000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x4809c000 0x400>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			ti,needs-special-reset;
+			dmas = <&sdma 61>, <&sdma 62>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mmc2: mmc@480b4000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x480b4000 0x400>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc2";
+			ti,needs-special-reset;
+			dmas = <&sdma 47>, <&sdma 48>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mmc3: mmc@480ad000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x480ad000 0x400>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc3";
+			ti,needs-special-reset;
+			dmas = <&sdma 77>, <&sdma 78>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mmc4: mmc@480d1000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x480d1000 0x400>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc4";
+			ti,needs-special-reset;
+			dmas = <&sdma 57>, <&sdma 58>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mcspi1: spi@48098000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x48098000 0x200>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi1";
+			ti,spi-num-cs = <4>;
+			dmas = <&sdma 35>,
+			       <&sdma 36>,
+			       <&sdma 37>,
+			       <&sdma 38>,
+			       <&sdma 39>,
+			       <&sdma 40>,
+			       <&sdma 41>,
+			       <&sdma 42>;
+			dma-names = "tx0", "rx0", "tx1", "rx1",
+				    "tx2", "rx2", "tx3", "rx3";
+			status = "disabled";
+		};
+
+		mcspi2: spi@4809a000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x4809a000 0x200>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi2";
+			ti,spi-num-cs = <2>;
+			dmas = <&sdma 43>,
+			       <&sdma 44>,
+			       <&sdma 45>,
+			       <&sdma 46>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+			status = "disabled";
+		};
+
+		mcspi3: spi@480b8000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x480b8000 0x200>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi3";
+			ti,spi-num-cs = <2>;
+			dmas = <&sdma 15>, <&sdma 16>;
+			dma-names = "tx0", "rx0";
+			status = "disabled";
+		};
+
+		mcspi4: spi@480ba000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x480ba000 0x200>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi4";
+			ti,spi-num-cs = <1>;
+			dmas = <&sdma 70>, <&sdma 71>;
+			dma-names = "tx0", "rx0";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi
index e8559b75..bc22557 100644
--- a/arch/arm/boot/dts/ecx-common.dtsi
+++ b/arch/arm/boot/dts/ecx-common.dtsi
@@ -19,6 +19,14 @@
 		bootargs = "console=ttyAMA0";
 	};
 
+	psci {
+		compatible	= "arm,psci";
+		method		= "smc";
+		cpu_suspend	= <0x84000002>;
+		cpu_off		= <0x84000004>;
+		cpu_on		= <0x84000006>;
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index b9b3241..861aa7d 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for the KZM9D board
  *
- * Copyright (C) 2012 Renesas Solutions Corp.
+ * Copyright (C) 2013 Renesas Solutions Corp.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -21,6 +21,37 @@
 	};
 
 	chosen {
-		bootargs = "console=tty0 console=ttyS1,115200n81 earlyprintk=serial8250-em.1,115200n81 mem=128M@0x40000000 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
+		bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp";
+	};
+
+	reg_1p8v: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3p3v: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	lan9220@20000000 {
+		compatible = "smsc,lan9220", "smsc,lan9115";
+		reg = <0x20000000 0x10000>;
+		phy-mode = "mii";
+		interrupt-parent = <&gpio0>;
+		interrupts = <1 1>;	/* active high */
+		reg-io-width = <4>;
+		smsc,irq-active-high;
+		smsc,irq-push-pull;
+		vddvario-supply = <&reg_1p8v>;
+		vdd33a-supply = <&reg_3p3v>;
 	};
 };
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index c8a8c08..9063a443 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -14,6 +14,14 @@
 	compatible = "renesas,emev2";
 	interrupt-parent = <&gic>;
 
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -38,6 +46,12 @@
 		      <0xe0020000 0x0100>;
 	};
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 120 4>,
+			     <0 121 4>;
+	};
+
 	sti@e0180000 {
 		compatible = "renesas,em-sti";
 		reg = <0xe0180000 0x54>;
@@ -67,4 +81,55 @@
 		reg = <0xe1050000 0x38>;
 		interrupts = <0 11 0>;
 	};
+
+	gpio0: gpio@e0050000 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
+		interrupts = <0 67 0>, <0 68 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpio1: gpio@e0050080 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>;
+		interrupts = <0 69 0>, <0 70 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpio2: gpio@e0050100 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050100 0x2c>, <0xe0050140 0x20>;
+		interrupts = <0 71 0>, <0 72 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpio3: gpio@e0050180 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>;
+		interrupts = <0 73 0>, <0 74 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpio4: gpio@e0050200 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050200 0x2c>, <0xe0050240 0x20>;
+		interrupts = <0 75 0>, <0 76 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <31>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
 };
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 3f94fe8..a73eeb5 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -36,6 +36,12 @@
 		i2c5 = &i2c_5;
 		i2c6 = &i2c_6;
 		i2c7 = &i2c_7;
+		csis0 = &csis_0;
+		csis1 = &csis_1;
+		fimc0 = &fimc_0;
+		fimc1 = &fimc_1;
+		fimc2 = &fimc_2;
+		fimc3 = &fimc_3;
 	};
 
 	chipid@10000000 {
@@ -43,6 +49,12 @@
 		reg = <0x10000000 0x100>;
 	};
 
+	mipi_phy: video-phy@10020710 {
+		compatible = "samsung,s5pv210-mipi-video-phy";
+		reg = <0x10020710 8>;
+		#phy-cells = <1>;
+	};
+
 	pd_mfc: mfc-power-domain@10023C40 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023C40 0x20>;
@@ -92,6 +104,92 @@
 		reg = <0x10010000 0x400>;
 	};
 
+	camera {
+		compatible = "samsung,fimc", "simple-bus";
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		clock_cam: clock-controller {
+			 #clock-cells = <1>;
+		};
+
+		fimc_0: fimc@11800000 {
+			compatible = "samsung,exynos4210-fimc";
+			reg = <0x11800000 0x1000>;
+			interrupts = <0 84 0>;
+			clocks = <&clock 256>, <&clock 128>;
+			clock-names = "fimc", "sclk_fimc";
+			samsung,power-domain = <&pd_cam>;
+			samsung,sysreg = <&sys_reg>;
+			status = "disabled";
+		};
+
+		fimc_1: fimc@11810000 {
+			compatible = "samsung,exynos4210-fimc";
+			reg = <0x11810000 0x1000>;
+			interrupts = <0 85 0>;
+			clocks = <&clock 257>, <&clock 129>;
+			clock-names = "fimc", "sclk_fimc";
+			samsung,power-domain = <&pd_cam>;
+			samsung,sysreg = <&sys_reg>;
+			status = "disabled";
+		};
+
+		fimc_2: fimc@11820000 {
+			compatible = "samsung,exynos4210-fimc";
+			reg = <0x11820000 0x1000>;
+			interrupts = <0 86 0>;
+			clocks = <&clock 258>, <&clock 130>;
+			clock-names = "fimc", "sclk_fimc";
+			samsung,power-domain = <&pd_cam>;
+			samsung,sysreg = <&sys_reg>;
+			status = "disabled";
+		};
+
+		fimc_3: fimc@11830000 {
+			compatible = "samsung,exynos4210-fimc";
+			reg = <0x11830000 0x1000>;
+			interrupts = <0 87 0>;
+			clocks = <&clock 259>, <&clock 131>;
+			clock-names = "fimc", "sclk_fimc";
+			samsung,power-domain = <&pd_cam>;
+			samsung,sysreg = <&sys_reg>;
+			status = "disabled";
+		};
+
+		csis_0: csis@11880000 {
+			compatible = "samsung,exynos4210-csis";
+			reg = <0x11880000 0x4000>;
+			interrupts = <0 78 0>;
+			clocks = <&clock 260>, <&clock 134>;
+			clock-names = "csis", "sclk_csis";
+			bus-width = <4>;
+			samsung,power-domain = <&pd_cam>;
+			phys = <&mipi_phy 0>;
+			phy-names = "csis";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		csis_1: csis@11890000 {
+			compatible = "samsung,exynos4210-csis";
+			reg = <0x11890000 0x4000>;
+			interrupts = <0 80 0>;
+			clocks = <&clock 261>, <&clock 135>;
+			clock-names = "csis", "sclk_csis";
+			bus-width = <2>;
+			samsung,power-domain = <&pd_cam>;
+			phys = <&mipi_phy 2>;
+			phy-names = "csis";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
 	watchdog@10060000 {
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x10060000 0x100>;
@@ -155,13 +253,31 @@
 		status = "disabled";
 	};
 
+	ehci@12580000 {
+		compatible = "samsung,exynos4210-ehci";
+		reg = <0x12580000 0x100>;
+		interrupts = <0 70 0>;
+		clocks = <&clock 304>;
+		clock-names = "usbhost";
+		status = "disabled";
+	};
+
+	ohci@12590000 {
+		compatible = "samsung,exynos4210-ohci";
+		reg = <0x12590000 0x100>;
+		interrupts = <0 70 0>;
+		clocks = <&clock 304>;
+		clock-names = "usbhost";
+		status = "disabled";
+	};
+
 	mfc: codec@13400000 {
 		compatible = "samsung,mfc-v5";
 		reg = <0x13400000 0x10000>;
 		interrupts = <0 94 0>;
 		samsung,power-domain = <&pd_mfc>;
-		clocks = <&clock 170>, <&clock 273>;
-		clock-names = "sclk_mfc", "mfc";
+		clocks = <&clock 273>;
+		clock-names = "mfc";
 		status = "disabled";
 	};
 
@@ -297,8 +413,8 @@
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x13920000 0x100>;
 		interrupts = <0 66 0>;
-		tx-dma-channel = <&pdma0 7>; /* preliminary */
-		rx-dma-channel = <&pdma0 6>; /* preliminary */
+		dmas = <&pdma0 7>, <&pdma0 6>;
+		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&clock 327>, <&clock 159>;
@@ -312,8 +428,8 @@
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x13930000 0x100>;
 		interrupts = <0 67 0>;
-		tx-dma-channel = <&pdma1 7>; /* preliminary */
-		rx-dma-channel = <&pdma1 6>; /* preliminary */
+		dmas = <&pdma1 7>, <&pdma1 6>;
+		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&clock 328>, <&clock 160>;
@@ -327,8 +443,8 @@
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x13940000 0x100>;
 		interrupts = <0 68 0>;
-		tx-dma-channel = <&pdma0 9>; /* preliminary */
-		rx-dma-channel = <&pdma0 8>; /* preliminary */
+		dmas = <&pdma0 9>, <&pdma0 8>;
+		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&clock 329>, <&clock 161>;
@@ -342,6 +458,8 @@
 		compatible = "samsung,exynos4210-pwm";
 		reg = <0x139D0000 0x1000>;
 		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
+		clocks = <&clock 336>;
+		clock-names = "timers";
 		#pwm-cells = <2>;
 		status = "disabled";
 	};
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 382d8c7..1a12fb2 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -32,13 +32,20 @@
 		bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
 	};
 
-	mmc_reg: voltage-regulator {
-	        compatible = "regulator-fixed";
-		regulator-name = "VMEM_VDD_2.8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpx1 1 0>;
-		enable-active-high;
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mmc_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "VMEM_VDD_2.8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpx1 1 0>;
+			enable-active-high;
+		};
 	};
 
 	tmu@100C0000 {
@@ -192,7 +199,12 @@
 				};
 
 				buck1_reg: BUCK1 {
-					regulator-name = "VDD_ARM_1.2V";
+					/*
+					* HACK: The real name is VDD_ARM_1.2V,
+					* but exynos-cpufreq does not support
+					* DT-based regulator lookup yet.
+					*/
+					regulator-name = "vdd_arm";
 					regulator-min-microvolt = <950000>;
 					regulator-max-microvolt	= <1350000>;
 					regulator-always-on;
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
index 553bcea..a7c2128 100644
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -797,6 +797,29 @@
 			samsung,pin-pud = <0>;
 			samsung,pin-drv = <0>;
 		};
+
+		cam_port_a_io: cam-port-a-io {
+			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
+					"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
+					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_port_a_clk_active: cam-port-a-clk-active {
+			samsung,pins = "gpj1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		cam_port_a_clk_idle: cam-port-a-clk-idle {
+			samsung,pins = "gpj1-3";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <1>;
+			samsung,pin-drv = <0>;
+		};
 	};
 
 	pinctrl@03860000 {
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 94eebff..63cc571 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -30,13 +30,62 @@
 		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
 	};
 
-	vemmc_reg: voltage-regulator@0 {
-	        compatible = "regulator-fixed";
-		regulator-name = "VMEM_VDD_2.8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpk0 2 0>;
-		enable-active-high;
+	regulators {
+		compatible = "simple-bus";
+
+		vemmc_reg: regulator-0 {
+			compatible = "regulator-fixed";
+			regulator-name = "VMEM_VDD_2.8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpk0 2 0>;
+			enable-active-high;
+		};
+
+		tsp_reg: regulator-1 {
+			compatible = "regulator-fixed";
+			regulator-name = "TSP_FIXED_VOLTAGES";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpl0 3 0>;
+			enable-active-high;
+		};
+
+		cam_af_28v_reg: regulator-2 {
+			compatible = "regulator-fixed";
+			regulator-name = "8M_AF_2.8V_EN";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpk1 1 0>;
+			enable-active-high;
+		};
+
+		cam_io_en_reg: regulator-3 {
+			compatible = "regulator-fixed";
+			regulator-name = "CAM_IO_EN";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpe2 1 0>;
+			enable-active-high;
+		};
+
+		cam_io_12v_reg: regulator-4 {
+			compatible = "regulator-fixed";
+			regulator-name = "8M_1.2V_EN";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			gpio = <&gpe2 5 0>;
+			enable-active-high;
+		};
+
+		vt_core_15v_reg: regulator-5 {
+			compatible = "regulator-fixed";
+			regulator-name = "VT_CORE_1.5V";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			gpio = <&gpe2 2 0>;
+			enable-active-high;
+		};
 	};
 
 	sdhci_emmc: sdhci@12510000 {
@@ -97,15 +146,6 @@
 		};
 	};
 
-	tsp_reg: voltage-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "TSP_FIXED_VOLTAGES";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpl0 3 0>;
-		enable-active-high;
-	};
-
 	i2c@13890000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-slave-addr = <0x10>;
@@ -218,6 +258,12 @@
 				     regulator-always-on;
 				};
 
+				vtcam_reg: LDO12 {
+				     regulator-name = "VT_CAM_1.8V";
+				     regulator-min-microvolt = <1800000>;
+				     regulator-max-microvolt = <1800000>;
+				};
+
 				vcclcd_reg: LDO13 {
 				     regulator-name = "VCC_3.3V_LCD";
 				     regulator-min-microvolt = <3300000>;
@@ -244,7 +290,12 @@
 				};
 
 				varm_breg: BUCK1 {
-				     regulator-name = "VARM_1.2V_C210";
+				     /*
+				      * HACK: The real name is VARM_1.2V_C210,
+				      * but exynos-cpufreq does not support
+				      * DT-based regulator lookup yet.
+				      */
+				     regulator-name = "vdd_arm";
 				     regulator-min-microvolt = <900000>;
 				     regulator-max-microvolt = <1350000>;
 				     regulator-always-on;
@@ -301,4 +352,26 @@
 			clock-frequency = <24000000>;
 		};
 	};
+
+	camera {
+		pinctrl-names = "default";
+		pinctrl-0 = <>;
+		status = "okay";
+
+		fimc_0: fimc@11800000 {
+			status = "okay";
+		};
+
+		fimc_1: fimc@11810000 {
+			status = "okay";
+		};
+
+		fimc_2: fimc@11820000 {
+			status = "okay";
+		};
+
+		fimc_3: fimc@11830000 {
+			status = "okay";
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 889cdad..d2e3f5f 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -350,3 +350,7 @@
 		status = "okay";
 	};
 };
+
+&mdma1 {
+	reg = <0x12840000 0x1000>;
+};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index b7f358a..057d682 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -72,7 +72,7 @@
 		};
 	};
 
-	clock: clock-controller@0x10030000 {
+	clock: clock-controller@10030000 {
 		compatible = "samsung,exynos4210-clock";
 		reg = <0x10030000 0x20000>;
 		#clock-cells = <1>;
@@ -125,4 +125,34 @@
 		clock-names = "sclk_fimg2d", "fimg2d";
 		status = "disabled";
 	};
+
+	camera {
+		clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>;
+		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
+
+		fimc_0: fimc@11800000 {
+			samsung,pix-limits = <4224 8192 1920 4224>;
+			samsung,mainscaler-ext;
+			samsung,cam-if;
+		};
+
+		fimc_1: fimc@11810000 {
+			samsung,pix-limits = <4224 8192 1920 4224>;
+			samsung,mainscaler-ext;
+			samsung,cam-if;
+		};
+
+		fimc_2: fimc@11820000 {
+			samsung,pix-limits = <4224 8192 1920 4224>;
+			samsung,mainscaler-ext;
+			samsung,lcd-wb;
+		};
+
+		fimc_3: fimc@11830000 {
+			samsung,pix-limits = <1920 8192 1366 1920>;
+			samsung,rotators = <0>;
+			samsung,mainscaler-ext;
+			samsung,lcd-wb;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index 7993641..d65984c 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -27,13 +27,25 @@
 		bootargs ="console=ttySAC2,115200";
 	};
 
-	mmc_reg: voltage-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "VMEM_VDD_2.8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpx1 1 0>;
-		enable-active-high;
+	firmware@0203F000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0203F000 0x1000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mmc_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "VMEM_VDD_2.8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpx1 1 0>;
+			enable-active-high;
+		};
 	};
 
 	pinctrl@11000000 {
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
new file mode 100644
index 0000000..fb7b9ae
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -0,0 +1,579 @@
+/*
+ * Samsung's Exynos4412 based Trats 2 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's Trats 2 board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos4412.dtsi"
+
+/ {
+	model = "Samsung Trats 2 based on Exynos4412";
+	compatible = "samsung,trats2", "samsung,exynos4412";
+
+	aliases {
+		i2c8 = &i2c_ak8975;
+	};
+
+	memory {
+		reg =  <0x40000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
+	};
+
+	firmware@0204F000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0204F000 0x1000>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti", "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti", "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vemmc_reg: regulator-0 {
+			compatible = "regulator-fixed";
+			regulator-name = "VMEM_VDD_2.8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpk0 2 0>;
+			enable-active-high;
+		};
+
+		cam_io_reg: voltage-regulator-1 {
+			compatible = "regulator-fixed";
+			regulator-name = "CAM_SENSOR_A";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpm0 2 0>;
+			enable-active-high;
+		};
+
+		/* More to come */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-down {
+			interrupt-parent = <&gpj1>;
+			interrupts = <2 0>;
+			gpios = <&gpj1 2 1>;
+			linux,code = <114>;
+			label = "volume down";
+			debounce-interval = <10>;
+		};
+
+		key-up {
+			interrupt-parent = <&gpj1>;
+			interrupts = <1 0>;
+			gpios = <&gpj1 1 1>;
+			linux,code = <115>;
+			label = "volume up";
+			debounce-interval = <10>;
+		};
+
+		key-power {
+			interrupt-parent = <&gpx2>;
+			interrupts = <7 0>;
+			gpios = <&gpx2 7 1>;
+			linux,code = <116>;
+			label = "power";
+			debounce-interval = <10>;
+			gpio-key,wakeup;
+		};
+	};
+
+	i2c@13890000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <400000>;
+		pinctrl-0 = <&i2c3_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		mms114-touchscreen@48 {
+			compatible = "melfas,mms114";
+			reg = <0x48>;
+			interrupt-parent = <&gpm2>;
+			interrupts = <3 2>;
+			x-size = <720>;
+			y-size = <1280>;
+			avdd-supply = <&ldo23_reg>;
+			vdd-supply = <&ldo24_reg>;
+		};
+	};
+
+	i2c@138D0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <100000>;
+		pinctrl-0 = <&i2c7_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		max77686_pmic@09 {
+			compatible = "maxim,max77686";
+			interrupt-parent = <&gpx0>;
+			interrupts = <7 0>;
+			reg = <0x09>;
+
+			voltage-regulators {
+				ldo1_reg: ldo1 {
+					regulator-compatible = "LDO1";
+					regulator-name = "VALIVE_1.0V_AP";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-mem-on;
+				};
+
+				ldo2_reg: ldo2 {
+					regulator-compatible = "LDO2";
+					regulator-name = "VM1M2_1.2V_AP";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-mem-on;
+				};
+
+				ldo3_reg: ldo3 {
+					regulator-compatible = "LDO3";
+					regulator-name = "VCC_1.8V_AP";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-mem-on;
+				};
+
+				ldo4_reg: ldo4 {
+					regulator-compatible = "LDO4";
+					regulator-name = "VCC_2.8V_AP";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					regulator-mem-on;
+				};
+
+				ldo5_reg: ldo5 {
+					regulator-compatible = "LDO5";
+					regulator-name = "VCC_1.8V_IO";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-mem-on;
+				};
+
+				ldo6_reg: ldo6 {
+					regulator-compatible = "LDO6";
+					regulator-name = "VMPLL_1.0V_AP";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-mem-on;
+				};
+
+				ldo7_reg: ldo7 {
+					regulator-compatible = "LDO7";
+					regulator-name = "VPLL_1.0V_AP";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-mem-on;
+				};
+
+				ldo8_reg: ldo8 {
+					regulator-compatible = "LDO8";
+					regulator-name = "VMIPI_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-mem-off;
+				};
+
+				ldo9_reg: ldo9 {
+					regulator-compatible = "LDO9";
+					regulator-name = "CAM_ISP_MIPI_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-mem-idle;
+				};
+
+				ldo10_reg: ldo10 {
+					regulator-compatible = "LDO10";
+					regulator-name = "VMIPI_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-mem-off;
+				};
+
+				ldo11_reg: ldo11 {
+					regulator-compatible = "LDO11";
+					regulator-name = "VABB1_1.95V";
+					regulator-min-microvolt = <1950000>;
+					regulator-max-microvolt = <1950000>;
+					regulator-always-on;
+					regulator-mem-off;
+				};
+
+				ldo12_reg: ldo12 {
+					regulator-compatible = "LDO12";
+					regulator-name = "VUOTG_3.0V";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-mem-off;
+				};
+
+				ldo13_reg: ldo13 {
+					regulator-compatible = "LDO13";
+					regulator-name = "NFC_AVDD_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-mem-idle;
+				};
+
+				ldo14_reg: ldo14 {
+					regulator-compatible = "LDO14";
+					regulator-name = "VABB2_1.95V";
+					regulator-min-microvolt = <1950000>;
+					regulator-max-microvolt = <1950000>;
+					regulator-always-on;
+					regulator-mem-off;
+				};
+
+				ldo15_reg: ldo15 {
+					regulator-compatible = "LDO15";
+					regulator-name = "VHSIC_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-mem-off;
+				};
+
+				ldo16_reg: ldo16 {
+					regulator-compatible = "LDO16";
+					regulator-name = "VHSIC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-mem-off;
+				};
+
+				ldo17_reg: ldo17 {
+					regulator-compatible = "LDO17";
+					regulator-name = "CAM_SENSOR_CORE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-mem-idle;
+				};
+
+				ldo18_reg: ldo18 {
+					regulator-compatible = "LDO18";
+					regulator-name = "CAM_ISP_SEN_IO_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-mem-idle;
+				};
+
+				ldo19_reg: ldo19 {
+					regulator-compatible = "LDO19";
+					regulator-name = "VT_CAM_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-mem-idle;
+				};
+
+				ldo20_reg: ldo20 {
+					regulator-compatible = "LDO20";
+					regulator-name = "VDDQ_PRE_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-mem-idle;
+				};
+
+				ldo21_reg: ldo21 {
+					regulator-compatible = "LDO21";
+					regulator-name = "VTF_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-mem-idle;
+				};
+
+				ldo22_reg: ldo22 {
+					regulator-compatible = "LDO22";
+					regulator-name = "VMEM_VDD_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					regulator-mem-off;
+				};
+
+				ldo23_reg: ldo23 {
+					regulator-compatible = "LDO23";
+					regulator-name = "TSP_AVDD_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-mem-idle;
+				};
+
+				ldo24_reg: ldo24 {
+					regulator-compatible = "LDO24";
+					regulator-name = "TSP_VDD_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-mem-idle;
+				};
+
+				ldo25_reg: ldo25 {
+					regulator-compatible = "LDO25";
+					regulator-name = "LCD_VCC_3.3V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-mem-idle;
+				};
+
+				ldo26_reg: ldo26 {
+					regulator-compatible = "LDO26";
+					regulator-name = "MOTOR_VCC_3.0V";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-mem-idle;
+				};
+
+				buck1_reg: buck1 {
+					regulator-compatible = "BUCK1";
+					regulator-name = "vdd_mif";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					regulator-mem-off;
+				};
+
+				buck2_reg: buck2 {
+					regulator-compatible = "BUCK2";
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					regulator-mem-off;
+				};
+
+				buck3_reg: buck3 {
+					regulator-compatible = "BUCK3";
+					regulator-name = "vdd_int";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+					regulator-boot-on;
+					regulator-mem-off;
+				};
+
+				buck4_reg: buck4 {
+					regulator-compatible = "BUCK4";
+					regulator-name = "vdd_g3d";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-boot-on;
+					regulator-mem-off;
+				};
+
+				buck5_reg: buck5 {
+					regulator-compatible = "BUCK5";
+					regulator-name = "VMEM_1.2V_AP";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				buck6_reg: buck6 {
+					regulator-compatible = "BUCK6";
+					regulator-name = "VCC_SUB_1.35V";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+				};
+
+				buck7_reg: buck7 {
+					regulator-compatible = "BUCK7";
+					regulator-name = "VCC_SUB_2.0V";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					regulator-always-on;
+				};
+
+				buck8_reg: buck8 {
+					regulator-compatible = "BUCK8";
+					regulator-name = "VMEM_VDDF_3.0V";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+					regulator-mem-off;
+				};
+
+				buck9_reg: buck9 {
+					regulator-compatible = "BUCK9";
+					regulator-name = "CAM_ISP_CORE_1.2V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-mem-off;
+				};
+			};
+		};
+	};
+
+	sdhci@12510000 {
+		bus-width = <8>;
+		non-removable;
+		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
+		pinctrl-names = "default";
+		vmmc-supply = <&vemmc_reg>;
+		status = "okay";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+
+	i2c_ak8975: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&gpy2 4 0>, <&gpy2 5 0>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		ak8975@0c {
+			compatible = "ak,ak8975";
+			reg = <0x0c>;
+			gpios = <&gpj0 7 0>;
+		};
+	};
+
+	spi_1: spi@13930000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi1_bus>;
+		status = "okay";
+
+		s5c73m3_spi: s5c73m3 {
+			compatible = "samsung,s5c73m3";
+			spi-max-frequency = <50000000>;
+			reg = <0>;
+			controller-data {
+				cs-gpio = <&gpb 5 0>;
+				samsung,spi-feedback-delay = <2>;
+			};
+		};
+	};
+
+	camera {
+		pinctrl-0 = <&cam_port_b_clk_active>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		fimc_0: fimc@11800000 {
+			status = "okay";
+		};
+
+		fimc_1: fimc@11810000 {
+			status = "okay";
+		};
+
+		fimc_2: fimc@11820000 {
+			status = "okay";
+		};
+
+		fimc_3: fimc@11830000 {
+			status = "okay";
+		};
+
+		csis_1: csis@11890000 {
+			vddcore-supply = <&ldo8_reg>;
+			vddio-supply = <&ldo10_reg>;
+			clock-frequency = <160000000>;
+			status = "okay";
+
+			/* Camera D (4) MIPI CSI-2 (CSIS1) */
+			port@4 {
+				reg = <4>;
+				csis1_ep: endpoint {
+					remote-endpoint = <&is_s5k6a3_ep>;
+					data-lanes = <1>;
+					samsung,csis-hs-settle = <18>;
+					samsung,csis-wclk;
+				};
+			};
+		};
+
+		fimc_lite_0: fimc-lite@12390000 {
+			status = "okay";
+		};
+
+		fimc_lite_1: fimc-lite@123A0000 {
+			status = "okay";
+		};
+
+		fimc-is@12000000 {
+			pinctrl-0 = <&fimc_is_uart>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			i2c1_isp: i2c-isp@12140000 {
+				pinctrl-0 = <&fimc_is_i2c1>;
+				pinctrl-names = "default";
+
+				s5k6a3@10 {
+					compatible = "samsung,s5k6a3";
+					reg = <0x10>;
+					svdda-supply = <&cam_io_reg>;
+					svddio-supply = <&ldo19_reg>;
+					clock-frequency = <24000000>;
+					/* CAM_B_CLKOUT */
+					clocks = <&clock_cam 1>;
+					clock-names = "mclk";
+					samsung,camclk-out = <1>;
+					gpios = <&gpm1 6 0>;
+
+					port {
+						is_s5k6a3_ep: endpoint {
+							remote-endpoint = <&csis1_ep>;
+							data-lanes = <1>;
+						};
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
index 704290f..99b26df 100644
--- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -401,13 +401,26 @@
 			samsung,pin-drv = <0>;
 		};
 
-		cam_port_a: cam-port-a {
+		cam_port_a_io: cam-port-a-io {
 			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
 					"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
-					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-3",
-					"gpj1-4";
+					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
 			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_port_a_clk_active: cam-port-a-clk-active {
+			samsung,pins = "gpj1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		cam_port_a_clk_idle: cam-port-a-clk-idle {
+			samsung,pins = "gpj1-3";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <1>;
 			samsung,pin-drv = <0>;
 		};
 	};
@@ -778,16 +791,29 @@
 			samsung,pin-drv = <3>;
 		};
 
-		cam_port_b: cam-port-b {
+		cam_port_b_io: cam-port-b-io {
 			samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
 					"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
-					"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1",
-					"gpm2-2";
+					"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
 			samsung,pin-drv = <0>;
 		};
 
+		cam_port_b_clk_active: cam-port-b-clk-active {
+			samsung,pins = "gpm2-2";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		cam_port_b_clk_idle: cam-port-b-clk-idle {
+			samsung,pins = "gpm2-2";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <1>;
+			samsung,pin-drv = <0>;
+		};
+
 		eint0: ext-int0 {
 			samsung,pins = "gpx0-0";
 			samsung,pin-function = <0xf>;
@@ -822,6 +848,27 @@
 			samsung,pin-pud = <0>;
 			samsung,pin-drv = <0>;
 		};
+
+		fimc_is_i2c0: fimc-is-i2c0 {
+			samsung,pins = "gpm4-0", "gpm4-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		fimc_is_i2c1: fimc-is-i2c1 {
+			samsung,pins = "gpm4-2", "gpm4-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		fimc_is_uart: fimc-is-uart {
+			samsung,pins = "gpm3-5", "gpm3-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
 	};
 
 	pinctrl@03860000 {
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index 01da194..ad531fe 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -26,9 +26,16 @@
 		pinctrl1 = &pinctrl_1;
 		pinctrl2 = &pinctrl_2;
 		pinctrl3 = &pinctrl_3;
+		fimc-lite0 = &fimc_lite_0;
+		fimc-lite1 = &fimc_lite_1;
 	};
 
-	clock: clock-controller@0x10030000 {
+	pd_isp: isp-power-domain@10023CA0 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023CA0 0x20>;
+	};
+
+	clock: clock-controller@10030000 {
 		compatible = "samsung,exynos4412-clock";
 		reg = <0x10030000 0x20000>;
 		#clock-cells = <1>;
@@ -73,4 +80,100 @@
 		clock-names = "sclk_fimg2d", "fimg2d";
 		status = "disabled";
 	};
+
+	camera {
+		clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>;
+		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
+
+		fimc_0: fimc@11800000 {
+			compatible = "samsung,exynos4212-fimc";
+			samsung,pix-limits = <4224 8192 1920 4224>;
+			samsung,mainscaler-ext;
+			samsung,isp-wb;
+			samsung,cam-if;
+		};
+
+		fimc_1: fimc@11810000 {
+			compatible = "samsung,exynos4212-fimc";
+			samsung,pix-limits = <4224 8192 1920 4224>;
+			samsung,mainscaler-ext;
+			samsung,isp-wb;
+			samsung,cam-if;
+		};
+
+		fimc_2: fimc@11820000 {
+			compatible = "samsung,exynos4212-fimc";
+			samsung,pix-limits = <4224 8192 1920 4224>;
+			samsung,mainscaler-ext;
+			samsung,isp-wb;
+			samsung,lcd-wb;
+			samsung,cam-if;
+		};
+
+		fimc_3: fimc@11830000 {
+			compatible = "samsung,exynos4212-fimc";
+			samsung,pix-limits = <1920 8192 1366 1920>;
+			samsung,rotators = <0>;
+			samsung,mainscaler-ext;
+			samsung,isp-wb;
+			samsung,lcd-wb;
+		};
+
+		fimc_lite_0: fimc-lite@12390000 {
+			compatible = "samsung,exynos4212-fimc-lite";
+			reg = <0x12390000 0x1000>;
+			interrupts = <0 105 0>;
+			samsung,power-domain = <&pd_isp>;
+			clocks = <&clock 353>;
+			clock-names = "flite";
+			status = "disabled";
+		};
+
+		fimc_lite_1: fimc-lite@123A0000 {
+			compatible = "samsung,exynos4212-fimc-lite";
+			reg = <0x123A0000 0x1000>;
+			interrupts = <0 106 0>;
+			samsung,power-domain = <&pd_isp>;
+			clocks = <&clock 354>;
+			clock-names = "flite";
+			status = "disabled";
+		};
+
+		fimc_is: fimc-is@12000000 {
+			compatible = "samsung,exynos4212-fimc-is", "simple-bus";
+			reg = <0x12000000 0x260000>;
+			interrupts = <0 90 0>, <0 95 0>;
+			samsung,power-domain = <&pd_isp>;
+			clocks = <&clock 353>, <&clock 354>, <&clock 355>,
+				<&clock 356>, <&clock 17>, <&clock 357>,
+				<&clock 358>, <&clock 359>, <&clock 360>,
+				<&clock 450>,<&clock 451>, <&clock 452>,
+				<&clock 453>, <&clock 176>, <&clock 13>,
+				<&clock 454>, <&clock 395>, <&clock 455>;
+			clock-names = "lite0", "lite1", "ppmuispx",
+				      "ppmuispmx", "mpll", "isp",
+				      "drc", "fd", "mcuisp",
+				      "ispdiv0", "ispdiv1", "mcuispdiv0",
+				      "mcuispdiv1", "uart", "aclk200",
+				      "div_aclk200", "aclk400mcuisp",
+				      "div_aclk400mcuisp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			pmu {
+				reg = <0x10020000 0x3000>;
+			};
+
+			i2c1_isp: i2c-isp@12140000 {
+				compatible = "samsung,exynos4212-i2c-isp";
+				reg = <0x12140000 0x100>;
+				clocks = <&clock 370>;
+				clock-names = "i2c_isp";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index f65e124..074739d 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -95,7 +95,7 @@
 		interrupts = <0 54 0>;
 	};
 
-	rtc {
+	rtc@101E0000 {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x101E0000 0x100>;
 		interrupts = <0 43 0>, <0 44 0>;
@@ -108,4 +108,23 @@
 		interrupts = <0 42 0>;
 		status = "disabled";
 	};
+
+	fimd@14400000 {
+		compatible = "samsung,exynos5250-fimd";
+		interrupt-parent = <&combiner>;
+		reg = <0x14400000 0x40000>;
+		interrupt-names = "fifo", "vsync", "lcd_sys";
+		interrupts = <18 4>, <18 5>, <18 6>;
+		status = "disabled";
+	};
+
+	dp-controller@145B0000 {
+		compatible = "samsung,exynos5-dp";
+		reg = <0x145B0000 0x1000>;
+		interrupts = <10 3>;
+		interrupt-parent = <&combiner>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index abc7272..6845270 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -11,6 +11,7 @@
 
 /dts-v1/;
 #include "exynos5250.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "Insignal Arndale evaluation board based on EXYNOS5250";
@@ -37,6 +38,28 @@
 		s5m8767_pmic@66 {
 			compatible = "samsung,s5m8767-pmic";
 			reg = <0x66>;
+			interrupt-parent = <&gpx3>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+			vinb1-supply = <&main_dc_reg>;
+			vinb2-supply = <&main_dc_reg>;
+			vinb3-supply = <&main_dc_reg>;
+			vinb4-supply = <&main_dc_reg>;
+			vinb5-supply = <&main_dc_reg>;
+			vinb6-supply = <&main_dc_reg>;
+			vinb7-supply = <&main_dc_reg>;
+			vinb8-supply = <&main_dc_reg>;
+			vinb9-supply = <&main_dc_reg>;
+
+			vinl1-supply = <&buck7_reg>;
+			vinl2-supply = <&buck7_reg>;
+			vinl3-supply = <&buck7_reg>;
+			vinl4-supply = <&main_dc_reg>;
+			vinl5-supply = <&main_dc_reg>;
+			vinl6-supply = <&main_dc_reg>;
+			vinl7-supply = <&main_dc_reg>;
+			vinl8-supply = <&buck8_reg>;
+			vinl9-supply = <&buck8_reg>;
 
 			s5m8767,pmic-buck2-dvs-voltage = <1300000>;
 			s5m8767,pmic-buck3-dvs-voltage = <1100000>;
@@ -276,6 +299,16 @@
 					op_mode = <1>;
 				};
 
+				buck7_reg: BUCK7 {
+					regulator-name = "PVDD_BUCK7";
+					regulator-always-on;
+				};
+
+				buck8_reg: BUCK8 {
+					regulator-name = "PVDD_BUCK8";
+					regulator-always-on;
+				};
+
 				buck9_reg: BUCK9 {
 					regulator-name = "VDD_33_OFF_EXT1";
 					regulator-min-microvolt = <750000>;
@@ -291,11 +324,33 @@
 	};
 
 	i2c@12C80000 {
-		status = "disabled";
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <66000>;
+		samsung,i2c-slave-addr = <0x50>;
+
+		hdmiddc@50 {
+			compatible = "samsung,exynos4210-hdmiddc";
+			reg = <0x50>;
+		};
 	};
 
 	i2c@12C90000 {
-		status = "disabled";
+		wm1811a@1a {
+			compatible = "wlf,wm1811";
+			reg = <0x1a>;
+
+			AVDD2-supply = <&main_dc_reg>;
+			CPVDD-supply = <&main_dc_reg>;
+			DBVDD1-supply = <&main_dc_reg>;
+			DBVDD2-supply = <&main_dc_reg>;
+			DBVDD3-supply = <&main_dc_reg>;
+			LDO1VDD-supply = <&main_dc_reg>;
+			SPKVDD1-supply = <&main_dc_reg>;
+			SPKVDD2-supply = <&main_dc_reg>;
+
+			wlf,ldo1ena = <&gpb0 0 0>;
+			wlf,ldo2ena = <&gpb0 1 0>;
+		};
 	};
 
 	i2c@12CA0000 {
@@ -314,6 +369,17 @@
 		status = "disabled";
 	};
 
+	i2c@12CE0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <66000>;
+		samsung,i2c-slave-addr = <0x38>;
+
+		hdmiphy@38 {
+			compatible = "samsung,exynos4212-hdmiphy";
+			reg = <0x38>;
+		};
+	};
+
 	i2c@121D0000 {
 		status = "disabled";
 	};
@@ -364,6 +430,10 @@
 		status = "disabled";
 	};
 
+	i2s0: i2s@03830000 {
+		status = "okay";
+	};
+
 	spi_0: spi@12d20000 {
 		status = "disabled";
 	};
@@ -429,18 +499,32 @@
 		vdd-supply = <&ldo8_reg>;
 	};
 
-	mmc_reg: voltage-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_33ON_2.8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpx1 1 1>;
-		enable-active-high;
-	};
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-	reg_hdmi_en: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "hdmi-en";
+		main_dc_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "MAIN_DC";
+		};
+
+		mmc_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "VDD_33ON_2.8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpx1 1 1>;
+			enable-active-high;
+		};
+
+		reg_hdmi_en: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdmi-en";
+		};
 	};
 
 	fixed-rate-clocks {
@@ -450,16 +534,18 @@
 		};
 	};
 
-	dp-controller {
+	dp-controller@145B0000 {
 		samsung,color-space = <0>;
 		samsung,dynamic-range = <0>;
 		samsung,ycbcr-coeff = <0>;
 		samsung,color-depth = <1>;
 		samsung,link-rate = <0x0a>;
 		samsung,lane-count = <4>;
+		status = "okay";
 	};
 
 	fimd: fimd@14400000 {
+		status = "okay";
 		display-timings {
 			native-mode = <&timing0>;
 			timing0: timing@0 {
@@ -477,7 +563,21 @@
 		};
 	};
 
-	rtc {
-		status = "okay";
+	usb_hub_bus {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		// SMSC USB3503 connected in hardware only mode as a PHY
+		usb_hub: usb_hub {
+			compatible = "smsc,usb3503a";
+
+			reset-gpios = <&gpx3 5 1>;
+			connect-gpios = <&gpd1 7 1>;
+		};
+	};
+
+	usb@12110000 {
+		usb-phy = <&usb2_phy>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index 724a22f..9a49e68 100644
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -210,21 +210,21 @@
 			samsung,pins = "gpa0-2", "gpa0-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c2_bus: i2c2-bus {
 			samsung,pins = "gpa0-6", "gpa0-7";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c2_hs_bus: i2c2-hs-bus {
 			samsung,pins = "gpa0-6", "gpa0-7";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		uart2_data: uart2-data {
@@ -238,21 +238,21 @@
 			samsung,pins = "gpa1-2", "gpa1-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c3_bus: i2c3-bus {
 			samsung,pins = "gpa1-2", "gpa1-3";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c3_hs_bus: i2c3-hs-bus {
 			samsung,pins = "gpa1-2", "gpa1-3";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		uart3_data: uart3-data {
@@ -273,14 +273,14 @@
 			samsung,pins = "gpa2-0", "gpa2-1";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c5_bus: i2c5-bus {
 			samsung,pins = "gpa2-2", "gpa2-3";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		spi1_bus: spi1-bus {
@@ -376,14 +376,14 @@
 			samsung,pins = "gpb3-0", "gpb3-1";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c1_hs_bus: i2c1-hs-bus {
 			samsung,pins = "gpb3-2", "gpb3-3";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		sd0_clk: sd0-clk {
@@ -551,14 +551,14 @@
 			samsung,pins = "gpd0-2", "gpd0-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		dp_hpd: dp_hpd {
 			samsung,pins = "gpx0-7";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 	};
 
@@ -649,42 +649,42 @@
 				       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_i2c2_bus: cam-i2c2-bus {
 			samsung,pins = "gpe0-6", "gpe1-0";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_spi1_bus: cam-spi1-bus {
 			samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_i2c1_bus: cam-i2c1-bus {
 			samsung,pins = "gpf0-2", "gpf0-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_i2c0_bus: cam-i2c0-bus {
 			samsung,pins = "gpf0-0", "gpf0-1";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_spi0_bus: cam-spi0-bus {
 			samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_bayrgb_bus: cam-bayrgb-bus {
@@ -695,7 +695,7 @@
 				       "gpg2-0", "gpg2-1";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_port_a: cam-port-a {
@@ -704,7 +704,7 @@
 				       "gph1-4", "gph1-5", "gph1-6", "gph1-7";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 	};
 
@@ -756,7 +756,7 @@
 				       "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		c2c_txd: c2c-txd {
@@ -766,7 +766,7 @@
 				       "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 49f18c2..f86d567 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -231,14 +231,6 @@
 		status = "okay";
 	};
 
-	i2s1: i2s@12D60000 {
-		status = "disabled";
-	};
-
-	i2s2: i2s@12D70000 {
-		status = "disabled";
-	};
-
 	sound {
 		compatible = "samsung,smdk-wm8994";
 
@@ -250,7 +242,7 @@
 		samsung,vbus-gpio = <&gpx2 6 0>;
 	};
 
-	dp-controller {
+	dp-controller@145B0000 {
 		samsung,color-space = <0>;
 		samsung,dynamic-range = <0>;
 		samsung,ycbcr-coeff = <0>;
@@ -260,21 +252,25 @@
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&dp_hpd>;
+		status = "okay";
 	};
 
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: timing@0 {
-			/* 1280x800 */
-			clock-frequency = <50000>;
-			hactive = <1280>;
-			vactive = <800>;
-			hfront-porch = <4>;
-			hback-porch = <4>;
-			hsync-len = <4>;
-			vback-porch = <4>;
-			vfront-porch = <4>;
-			vsync-len = <4>;
+	fimd@14400000 {
+		status = "okay";
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing@0 {
+				/* 1280x800 */
+				clock-frequency = <50000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hfront-porch = <4>;
+				hback-porch = <4>;
+				hsync-len = <4>;
+				vback-porch = <4>;
+				vfront-porch = <4>;
+				vsync-len = <4>;
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index e79331d..fd711e2 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -171,10 +171,6 @@
 		};
 	};
 
-	rtc {
-		status = "okay";
-	};
-
 	/*
 	 * On Snow we've got SIP WiFi and so can keep drive strengths low to
 	 * reduce EMI.
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index ef57277..9db5047 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -68,17 +68,17 @@
 		};
 	};
 
-	pd_gsc: gsc-power-domain@0x10044000 {
+	pd_gsc: gsc-power-domain@10044000 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044000 0x20>;
 	};
 
-	pd_mfc: mfc-power-domain@0x10044040 {
+	pd_mfc: mfc-power-domain@10044040 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044040 0x20>;
 	};
 
-	clock: clock-controller@0x10010000 {
+	clock: clock-controller@10010000 {
 		compatible = "samsung,exynos5250-clock";
 		reg = <0x10010000 0x30000>;
 		#clock-cells = <1>;
@@ -96,6 +96,11 @@
 			     <1 14 0xf08>,
 			     <1 11 0xf08>,
 			     <1 10 0xf08>;
+		/* Unfortunately we need this since some versions of U-Boot
+		 * on Exynos don't set the CNTFRQ register, so we need the
+		 * value from DT.
+		 */
+		clock-frequency = <24000000>;
 	};
 
 	mct@101C0000 {
@@ -163,16 +168,27 @@
 		clock-names = "watchdog";
 	};
 
+	g2d@10850000 {
+		compatible = "samsung,exynos5250-g2d";
+		reg = <0x10850000 0x1000>;
+		interrupts = <0 91 0>;
+		clocks = <&clock 345>;
+		clock-names = "fimg2d";
+	};
+
 	codec@11000000 {
 		compatible = "samsung,mfc-v6";
 		reg = <0x11000000 0x10000>;
 		interrupts = <0 96 0>;
 		samsung,power-domain = <&pd_mfc>;
+		clocks = <&clock 266>;
+		clock-names = "mfc";
 	};
 
-	rtc {
+	rtc@101E0000 {
 		clocks = <&clock 337>;
 		clock-names = "rtc";
+		status = "okay";
 	};
 
 	tmu@10060000 {
@@ -405,7 +421,8 @@
 	};
 
 	i2s0: i2s@03830000 {
-		compatible = "samsung,i2s-v5";
+		compatible = "samsung,s5pv210-i2s";
+		status = "disabled";
 		reg = <0x03830000 0x100>;
 		dmas = <&pdma0 10
 			&pdma0 9
@@ -415,16 +432,14 @@
 			<&clock_audss EXYNOS_I2S_BUS>,
 			<&clock_audss EXYNOS_SCLK_I2S>;
 		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-		samsung,supports-6ch;
-		samsung,supports-rstclr;
-		samsung,supports-secdai;
 		samsung,idma-addr = <0x03000000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s0_bus>;
 	};
 
 	i2s1: i2s@12D60000 {
-		compatible = "samsung,i2s-v5";
+		compatible = "samsung,s3c6410-i2s";
+		status = "disabled";
 		reg = <0x12D60000 0x100>;
 		dmas = <&pdma1 12
 			&pdma1 11>;
@@ -436,7 +451,8 @@
 	};
 
 	i2s2: i2s@12D70000 {
-		compatible = "samsung,i2s-v5";
+		compatible = "samsung,s3c6410-i2s";
+		status = "disabled";
 		reg = <0x12D70000 0x100>;
 		dmas = <&pdma0 12
 			&pdma0 11>;
@@ -562,7 +578,7 @@
 		};
 	};
 
-	gsc_0:  gsc@0x13e00000 {
+	gsc_0:  gsc@13e00000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e00000 0x1000>;
 		interrupts = <0 85 0>;
@@ -571,7 +587,7 @@
 		clock-names = "gscl";
 	};
 
-	gsc_1:  gsc@0x13e10000 {
+	gsc_1:  gsc@13e10000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e10000 0x1000>;
 		interrupts = <0 86 0>;
@@ -580,7 +596,7 @@
 		clock-names = "gscl";
 	};
 
-	gsc_2:  gsc@0x13e20000 {
+	gsc_2:  gsc@13e20000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e20000 0x1000>;
 		interrupts = <0 87 0>;
@@ -589,7 +605,7 @@
 		clock-names = "gscl";
 	};
 
-	gsc_3:  gsc@0x13e30000 {
+	gsc_3:  gsc@13e30000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e30000 0x1000>;
 		interrupts = <0 88 0>;
@@ -602,41 +618,46 @@
 		compatible = "samsung,exynos4212-hdmi";
 		reg = <0x14530000 0x70000>;
 		interrupts = <0 95 0>;
-		clocks = <&clock 333>, <&clock 136>, <&clock 137>,
-				<&clock 333>, <&clock 333>;
+		clocks = <&clock 344>, <&clock 136>, <&clock 137>,
+				<&clock 159>, <&clock 1024>;
 		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
-				"sclk_hdmiphy", "hdmiphy";
+				"sclk_hdmiphy", "mout_hdmi";
 	};
 
 	mixer {
 		compatible = "samsung,exynos5250-mixer";
 		reg = <0x14450000 0x10000>;
 		interrupts = <0 94 0>;
+		clocks = <&clock 343>, <&clock 136>;
+		clock-names = "mixer", "sclk_hdmi";
 	};
 
-	dp-controller {
-		compatible = "samsung,exynos5-dp";
-		reg = <0x145b0000 0x1000>;
-		interrupts = <10 3>;
-		interrupt-parent = <&combiner>;
+	dp_phy: video-phy@10040720 {
+		compatible = "samsung,exynos5250-dp-video-phy";
+		reg = <0x10040720 4>;
+		#phy-cells = <0>;
+	};
+
+	dp-controller@145B0000 {
 		clocks = <&clock 342>;
 		clock-names = "dp";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		dptx-phy {
-			reg = <0x10040720>;
-			samsung,enable-mask = <1>;
-		};
+		phys = <&dp_phy>;
+		phy-names = "dp";
 	};
 
-	fimd {
-		compatible = "samsung,exynos5250-fimd";
-		interrupt-parent = <&combiner>;
-		reg = <0x14400000 0x40000>;
-		interrupt-names = "fifo", "vsync", "lcd_sys";
-		interrupts = <18 4>, <18 5>, <18 6>;
+	fimd@14400000 {
 		clocks = <&clock 133>, <&clock 339>;
 		clock-names = "sclk_fimd", "fimd";
 	};
+
+	adc: adc@12D10000 {
+		compatible = "samsung,exynos-adc-v1";
+		reg = <0x12D10000 0x100>, <0x10040718 0x4>;
+		interrupts = <0 106 0>;
+		clocks = <&clock 303>;
+		clock-names = "adc";
+		#io-channel-cells = <1>;
+		io-channel-ranges;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index 5848c42..e695aba 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -59,6 +59,13 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
+
+		dp_hpd: dp_hpd {
+			samsung,pins = "gpx0-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samaung,pin-drv = <0>;
+		};
 	};
 
 	pinctrl@13410000 {
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 08607df..79524c7 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -30,4 +30,61 @@
 			clock-frequency = <24000000>;
 		};
 	};
+
+	dp-controller@145B0000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&dp_hpd>;
+		samsung,color-space = <0>;
+		samsung,dynamic-range = <0>;
+		samsung,ycbcr-coeff = <0>;
+		samsung,color-depth = <1>;
+		samsung,link-rate = <0x0a>;
+		samsung,lane-count = <4>;
+		status = "okay";
+	};
+
+	fimd@14400000 {
+		status = "okay";
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing@0 {
+				clock-frequency = <50000>;
+				hactive = <2560>;
+				vactive = <1600>;
+				hfront-porch = <48>;
+				hback-porch = <80>;
+				hsync-len = <32>;
+				vback-porch = <16>;
+				vfront-porch = <8>;
+				vsync-len = <6>;
+			};
+		};
+	};
+
+	pinctrl@13400000 {
+		hdmi_hpd_irq: hdmi-hpd-irq {
+			samsung,pins = "gpx3-7";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <1>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	hdmi@14530000 {
+		status = "okay";
+		hpd-gpio = <&gpx3 7 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_hpd_irq>;
+	};
+
+	i2c_2: i2c@12C80000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <66000>;
+		status = "okay";
+
+		hdmiddc@50 {
+			compatible = "samsung,exynos4210-hdmiddc";
+			reg = <0x50>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 8c54c4b..09aa06c 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -14,7 +14,10 @@
  */
 
 #include "exynos5.dtsi"
-/include/ "exynos5420-pinctrl.dtsi"
+#include "exynos5420-pinctrl.dtsi"
+
+#include <dt-bindings/clk/exynos-audss-clk.h>
+
 / {
 	compatible = "samsung,exynos5420";
 
@@ -24,6 +27,10 @@
 		pinctrl2 = &pinctrl_2;
 		pinctrl3 = &pinctrl_3;
 		pinctrl4 = &pinctrl_4;
+		i2c0 = &i2c_0;
+		i2c1 = &i2c_1;
+		i2c2 = &i2c_2;
+		i2c3 = &i2c_3;
 	};
 
 	cpus {
@@ -59,12 +66,28 @@
 		};
 	};
 
-	clock: clock-controller@0x10010000 {
+	clock: clock-controller@10010000 {
 		compatible = "samsung,exynos5420-clock";
 		reg = <0x10010000 0x30000>;
 		#clock-cells = <1>;
 	};
 
+	clock_audss: audss-clock-controller@3810000 {
+		compatible = "samsung,exynos5420-audss-clock";
+		reg = <0x03810000 0x0C>;
+		#clock-cells = <1>;
+		clocks = <&clock 148>;
+		clock-names = "sclk_audio";
+	};
+
+	codec@11000000 {
+		compatible = "samsung,mfc-v7";
+		reg = <0x11000000 0x10000>;
+		interrupts = <0 96 0>;
+		clocks = <&clock 401>;
+		clock-names = "mfc";
+	};
+
 	mct@101C0000 {
 		compatible = "samsung,exynos4210-mct";
 		reg = <0x101C0000 0x800>;
@@ -90,6 +113,41 @@
 		};
 	};
 
+	gsc_pd: power-domain@10044000 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044000 0x20>;
+	};
+
+	isp_pd: power-domain@10044020 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044020 0x20>;
+	};
+
+	mfc_pd: power-domain@10044060 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044060 0x20>;
+	};
+
+	disp_pd: power-domain@100440C0 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x100440C0 0x20>;
+	};
+
+	mau_pd: power-domain@100440E0 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x100440E0 0x20>;
+	};
+
+	g2d_pd: power-domain@10044100 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044100 0x20>;
+	};
+
+	msc_pd: power-domain@10044120 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044120 0x20>;
+	};
+
 	pinctrl_0: pinctrl@13400000 {
 		compatible = "samsung,exynos5420-pinctrl";
 		reg = <0x13400000 0x1000>;
@@ -126,6 +184,12 @@
 		interrupts = <0 47 0>;
 	};
 
+	rtc@101E0000 {
+		clocks = <&clock 317>;
+		clock-names = "rtc";
+		status = "okay";
+	};
+
 	serial@12C00000 {
 		clocks = <&clock 257>, <&clock 128>;
 		clock-names = "uart", "clk_uart_baud0";
@@ -145,4 +209,105 @@
 		clocks = <&clock 260>, <&clock 131>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
+
+	dp_phy: video-phy@10040728 {
+		compatible = "samsung,exynos5250-dp-video-phy";
+		reg = <0x10040728 4>;
+		#phy-cells = <0>;
+	};
+
+	dp-controller@145B0000 {
+		clocks = <&clock 412>;
+		clock-names = "dp";
+		phys = <&dp_phy>;
+		phy-names = "dp";
+	};
+
+	fimd@14400000 {
+		samsung,power-domain = <&disp_pd>;
+		clocks = <&clock 147>, <&clock 421>;
+		clock-names = "sclk_fimd", "fimd";
+	};
+
+	adc: adc@12D10000 {
+		compatible = "samsung,exynos-adc-v2";
+		reg = <0x12D10000 0x100>, <0x10040720 0x4>;
+		interrupts = <0 106 0>;
+		clocks = <&clock 270>;
+		clock-names = "adc";
+		#io-channel-cells = <1>;
+		io-channel-ranges;
+		status = "disabled";
+	};
+
+	i2c_0: i2c@12C60000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C60000 0x100>;
+		interrupts = <0 56 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock 261>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_bus>;
+		status = "disabled";
+	};
+
+	i2c_1: i2c@12C70000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C70000 0x100>;
+		interrupts = <0 57 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock 262>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_bus>;
+		status = "disabled";
+	};
+
+	i2c_2: i2c@12C80000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C80000 0x100>;
+		interrupts = <0 58 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock 263>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_bus>;
+		status = "disabled";
+	};
+
+	i2c_3: i2c@12C90000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C90000 0x100>;
+		interrupts = <0 59 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock 264>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_bus>;
+		status = "disabled";
+	};
+
+	hdmi@14530000 {
+		compatible = "samsung,exynos4212-hdmi";
+		reg = <0x14530000 0x70000>;
+		interrupts = <0 95 0>;
+		clocks = <&clock 413>, <&clock 143>, <&clock 768>,
+			<&clock 158>, <&clock 640>;
+		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
+			"sclk_hdmiphy", "mout_hdmi";
+		status = "disabled";
+	};
+
+	mixer@14450000 {
+		compatible = "samsung,exynos5420-mixer";
+		reg = <0x14450000 0x10000>;
+		interrupts = <0 94 0>;
+		clocks = <&clock 431>, <&clock 143>;
+		clock-names = "mixer", "sclk_hdmi";
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts
index 5b22508..777fb1c 100644
--- a/arch/arm/boot/dts/exynos5440-sd5v1.dts
+++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts
@@ -17,7 +17,7 @@
 	compatible = "samsung,sd5v1", "samsung,exynos5440";
 
 	chosen {
-		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
+		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
 	};
 
 	fixed-rate-clocks {
diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
index ede7727..d58cb78 100644
--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
@@ -17,7 +17,7 @@
 	compatible = "samsung,ssdk5440", "samsung,exynos5440";
 
 	chosen {
-		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
+		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
 	};
 
 	spi_0: spi@D0000 {
@@ -68,9 +68,11 @@
 
 	pcie@290000 {
 		reset-gpio = <&pin_ctrl 5 0>;
+		status = "okay";
 	};
 
 	pcie@2a0000 {
 		reset-gpio = <&pin_ctrl 22 0>;
+		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index ff7f5d8..8da1070 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -18,9 +18,12 @@
 
 	aliases {
 		spi0 = &spi_0;
+		tmuctrl0 = &tmuctrl_0;
+		tmuctrl1 = &tmuctrl_1;
+		tmuctrl2 = &tmuctrl_2;
 	};
 
-	clock: clock-controller@0x160000 {
+	clock: clock-controller@160000 {
 		compatible = "samsung,exynos5440-clock";
 		reg = <0x160000 0x1000>;
 		#clock-cells = <1>;
@@ -207,6 +210,30 @@
 		clock-names = "rtc";
 	};
 
+	tmuctrl_0: tmuctrl@160118 {
+		compatible = "samsung,exynos5440-tmu";
+		reg = <0x160118 0x230>, <0x160368 0x10>;
+		interrupts = <0 58 0>;
+		clocks = <&clock 21>;
+		clock-names = "tmu_apbif";
+	};
+
+	tmuctrl_1: tmuctrl@16011C {
+		compatible = "samsung,exynos5440-tmu";
+		reg = <0x16011C 0x230>, <0x160368 0x10>;
+		interrupts = <0 58 0>;
+		clocks = <&clock 21>;
+		clock-names = "tmu_apbif";
+	};
+
+	tmuctrl_2: tmuctrl@160120 {
+		compatible = "samsung,exynos5440-tmu";
+		reg = <0x160120 0x230>, <0x160368 0x10>;
+		interrupts = <0 58 0>;
+		clocks = <&clock 21>;
+		clock-names = "tmu_apbif";
+	};
+
 	sata@210000 {
 		compatible = "snps,exynos5440-ahci";
 		reg = <0x210000 0x10000>;
@@ -248,6 +275,8 @@
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 0>;
 		interrupt-map = <0x0 0 &gic 53>;
+		num-lanes = <4>;
+		status = "disabled";
 	};
 
 	pcie@2a0000 {
@@ -267,5 +296,7 @@
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 0>;
 		interrupt-map = <0x0 0 &gic 56>;
+		num-lanes = <4>;
+		status = "disabled";
 	};
 };
diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts
deleted file mode 100644
index 3d580d6..0000000
--- a/arch/arm/boot/dts/hrefv60plus.dts
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "dbx5x0.dtsi"
-#include "href.dtsi"
-#include "stuib.dtsi"
-
-/ {
-	model = "ST-Ericsson HREF (v60+) platform with Device Tree";
-	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
-
-	gpio_keys {
-		button@1 {
-			gpios = <&gpio6 25 0x4>;
-		};
-	};
-
-	soc {
-		i2c@80110000 {
-			bu21013_tp@0x5c {
-				reset-gpio = <&gpio4 15 0x4>;
-			};
-		};
-
-		// External Micro SD slot
-		sdi0_per1@80126000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <100000000>;
-			bus-width = <4>;
-			mmc-cap-sd-highspeed;
-			mmc-cap-mmc-highspeed;
-			vmmc-supply = <&ab8500_ldo_aux3_reg>;
-
-			cd-gpios  = <&tc3589x_gpio 3 0x4>;
-
-			status = "okay";
-		};
-
-		// WLAN SDIO channel
-		sdi1_per2@80118000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <100000000>;
-			bus-width = <4>;
-
-			status = "okay";
-		};
-
-		// PoP:ed eMMC
-		sdi2_per3@80005000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <100000000>;
-			bus-width = <8>;
-			mmc-cap-mmc-highspeed;
-
-			status = "okay";
-		};
-
-		// On-board eMMC
-		sdi4_per2@80114000 {
-			arm,primecell-periphid = <0x10480180>;
-		        max-frequency = <100000000>;
-			bus-width = <8>;
-			mmc-cap-mmc-highspeed;
-			vmmc-supply = <&ab8500_ldo_aux2_reg>;
-
-			status = "okay";
-		};
-
-		prcmu@80157000 {
-			db8500-prcmu-regulators {
-				db8500_vape_reg: db8500_vape {
-					regulator-name = "db8500-vape";
-				};
-
-				db8500_varm_reg: db8500_varm {
-					regulator-name = "db8500-varm";
-				};
-
-				db8500_vmodem_reg: db8500_vmodem {
-					regulator-name = "db8500-vmodem";
-				};
-
-				db8500_vpll_reg: db8500_vpll {
-					regulator-name = "db8500-vpll";
-				};
-
-				db8500_vsmps1_reg: db8500_vsmps1 {
-					regulator-name = "db8500-vsmps1";
-				};
-
-				db8500_vsmps2_reg: db8500_vsmps2 {
-					regulator-name = "db8500-vsmps2";
-				};
-
-				db8500_vsmps3_reg: db8500_vsmps3 {
-					regulator-name = "db8500-vsmps3";
-				};
-
-				db8500_vrf1_reg: db8500_vrf1 {
-					regulator-name = "db8500-vrf1";
-				};
-
-				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
-					regulator-name = "db8500-sva-mmdsp";
-				};
-
-				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
-					regulator-name = "db8500-sva-mmdsp-ret";
-				};
-
-				db8500_sva_pipe_reg: db8500_sva_pipe {
-					regulator-name = "db8500_sva_pipe";
-				};
-
-				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
-					regulator-name = "db8500_sia_mmdsp";
-				};
-
-				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
-					regulator-name = "db8500-sia-mmdsp-ret";
-				};
-
-				db8500_sia_pipe_reg: db8500_sia_pipe {
-					regulator-name = "db8500-sia-pipe";
-				};
-
-				db8500_sga_reg: db8500_sga {
-					regulator-name = "db8500-sga";
-				};
-
-				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
-					regulator-name = "db8500-b2r2-mcde";
-				};
-
-				db8500_esram12_reg: db8500_esram12 {
-					regulator-name = "db8500-esram12";
-				};
-
-				db8500_esram12_ret_reg: db8500_esram12_ret {
-					regulator-name = "db8500-esram12-ret";
-				};
-
-				db8500_esram34_reg: db8500_esram34 {
-					regulator-name = "db8500-esram34";
-				};
-
-				db8500_esram34_ret_reg: db8500_esram34_ret {
-					regulator-name = "db8500-esram34-ret";
-				};
-			};
-
-			ab8500 {
-				ab8500-regulators {
-					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
-						regulator-name = "V-DISPLAY";
-					};
-
-					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
-						regulator-name = "V-eMMC1";
-					};
-
-					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
-						regulator-name = "V-MMC-SD";
-					};
-
-					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
-						regulator-name = "V-INTCORE";
-					};
-
-					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
-						regulator-name = "V-TVOUT";
-					};
-
-					ab8500_ldo_usb_reg: ab8500_ldo_usb {
-						regulator-name = "dummy";
-					};
-
-					ab8500_ldo_audio_reg: ab8500_ldo_audio {
-						regulator-name = "V-AUD";
-					};
-
-					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
-						regulator-name = "V-AMIC1";
-					};
-
-					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
-						regulator-name = "V-AMIC2";
-					};
-
-					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
-						regulator-name = "V-DMIC";
-					};
-
-					ab8500_ldo_ana_reg: ab8500_ldo_ana {
-						regulator-name = "V-CSI/DSI";
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index da0588a..1f026ad 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx23.dtsi"
+#include "imx23.dtsi"
 
 / {
 	model = "Freescale i.MX23 Evaluation Kit";
@@ -45,14 +45,14 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */
-						0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
-						0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
-						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
+						MX23_PAD_LCD_RESET__GPIO_1_18
+						MX23_PAD_PWM3__GPIO_1_29
+						MX23_PAD_PWM4__GPIO_1_30
+						MX23_PAD_SSP1_DETECT__SSP1_DETECT
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 
@@ -90,6 +90,11 @@
 		};
 
 		apbx@80040000 {
+			lradc@80050000 {
+				status = "okay";
+				fsl,lradc-touchscreen-wires = <4>;
+			};
+
 			pwm: pwm@80064000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pwm2_pins_a>;
@@ -107,6 +112,16 @@
 				pinctrl-0 = <&duart_pins_a>;
 				status = "okay";
 			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			status = "okay";
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index d107c4a..526bfdb 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -12,7 +12,7 @@
  */
 
 /dts-v1/;
-/include/ "imx23.dtsi"
+#include "imx23.dtsi"
 
 / {
 	model = "i.MX23 Olinuxino Low Cost Board";
@@ -40,21 +40,21 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
+						MX23_PAD_GPMI_ALE__GPIO_0_17
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				led_pin_gpio2_1: led_gpio2_1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
+						MX23_PAD_SSP1_DETECT__GPIO_2_1
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 
@@ -69,6 +69,10 @@
 		};
 
 		apbx@80040000 {
+			lradc@80050000 {
+				status = "okay";
+			};
+
 			duart: serial@80070000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&duart_pins_a>;
diff --git a/arch/arm/boot/dts/imx23-pinfunc.h b/arch/arm/boot/dts/imx23-pinfunc.h
new file mode 100644
index 0000000..5c0f32ca
--- /dev/null
+++ b/arch/arm/boot/dts/imx23-pinfunc.h
@@ -0,0 +1,333 @@
+/*
+ * Header providing constants for i.MX23 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MX23_PINCTRL_H__
+#define __DT_BINDINGS_MX23_PINCTRL_H__
+
+#include "mxs-pinfunc.h"
+
+#define MX23_PAD_GPMI_D00__GPMI_D00			0x0000
+#define MX23_PAD_GPMI_D01__GPMI_D01			0x0010
+#define MX23_PAD_GPMI_D02__GPMI_D02			0x0020
+#define MX23_PAD_GPMI_D03__GPMI_D03			0x0030
+#define MX23_PAD_GPMI_D04__GPMI_D04			0x0040
+#define MX23_PAD_GPMI_D05__GPMI_D05			0x0050
+#define MX23_PAD_GPMI_D06__GPMI_D06			0x0060
+#define MX23_PAD_GPMI_D07__GPMI_D07			0x0070
+#define MX23_PAD_GPMI_D08__GPMI_D08			0x0080
+#define MX23_PAD_GPMI_D09__GPMI_D09			0x0090
+#define MX23_PAD_GPMI_D10__GPMI_D10			0x00a0
+#define MX23_PAD_GPMI_D11__GPMI_D11			0x00b0
+#define MX23_PAD_GPMI_D12__GPMI_D12			0x00c0
+#define MX23_PAD_GPMI_D13__GPMI_D13			0x00d0
+#define MX23_PAD_GPMI_D14__GPMI_D14			0x00e0
+#define MX23_PAD_GPMI_D15__GPMI_D15			0x00f0
+#define MX23_PAD_GPMI_CLE__GPMI_CLE			0x0100
+#define MX23_PAD_GPMI_ALE__GPMI_ALE			0x0110
+#define MX23_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
+#define MX23_PAD_GPMI_RDY0__GPMI_RDY0			0x0130
+#define MX23_PAD_GPMI_RDY1__GPMI_RDY1			0x0140
+#define MX23_PAD_GPMI_RDY2__GPMI_RDY2			0x0150
+#define MX23_PAD_GPMI_RDY3__GPMI_RDY3			0x0160
+#define MX23_PAD_GPMI_WPN__GPMI_WPN			0x0170
+#define MX23_PAD_GPMI_WRN__GPMI_WRN			0x0180
+#define MX23_PAD_GPMI_RDN__GPMI_RDN			0x0190
+#define MX23_PAD_AUART1_CTS__AUART1_CTS			0x01a0
+#define MX23_PAD_AUART1_RTS__AUART1_RTS			0x01b0
+#define MX23_PAD_AUART1_RX__AUART1_RX			0x01c0
+#define MX23_PAD_AUART1_TX__AUART1_TX			0x01d0
+#define MX23_PAD_I2C_SCL__I2C_SCL			0x01e0
+#define MX23_PAD_I2C_SDA__I2C_SDA			0x01f0
+#define MX23_PAD_LCD_D00__LCD_D00			0x1000
+#define MX23_PAD_LCD_D01__LCD_D01			0x1010
+#define MX23_PAD_LCD_D02__LCD_D02			0x1020
+#define MX23_PAD_LCD_D03__LCD_D03			0x1030
+#define MX23_PAD_LCD_D04__LCD_D04			0x1040
+#define MX23_PAD_LCD_D05__LCD_D05			0x1050
+#define MX23_PAD_LCD_D06__LCD_D06			0x1060
+#define MX23_PAD_LCD_D07__LCD_D07			0x1070
+#define MX23_PAD_LCD_D08__LCD_D08			0x1080
+#define MX23_PAD_LCD_D09__LCD_D09			0x1090
+#define MX23_PAD_LCD_D10__LCD_D10			0x10a0
+#define MX23_PAD_LCD_D11__LCD_D11			0x10b0
+#define MX23_PAD_LCD_D12__LCD_D12			0x10c0
+#define MX23_PAD_LCD_D13__LCD_D13			0x10d0
+#define MX23_PAD_LCD_D14__LCD_D14			0x10e0
+#define MX23_PAD_LCD_D15__LCD_D15			0x10f0
+#define MX23_PAD_LCD_D16__LCD_D16			0x1100
+#define MX23_PAD_LCD_D17__LCD_D17			0x1110
+#define MX23_PAD_LCD_RESET__LCD_RESET			0x1120
+#define MX23_PAD_LCD_RS__LCD_RS				0x1130
+#define MX23_PAD_LCD_WR__LCD_WR				0x1140
+#define MX23_PAD_LCD_CS__LCD_CS				0x1150
+#define MX23_PAD_LCD_DOTCK__LCD_DOTCK			0x1160
+#define MX23_PAD_LCD_ENABLE__LCD_ENABLE			0x1170
+#define MX23_PAD_LCD_HSYNC__LCD_HSYNC			0x1180
+#define MX23_PAD_LCD_VSYNC__LCD_VSYNC			0x1190
+#define MX23_PAD_PWM0__PWM0				0x11a0
+#define MX23_PAD_PWM1__PWM1				0x11b0
+#define MX23_PAD_PWM2__PWM2				0x11c0
+#define MX23_PAD_PWM3__PWM3				0x11d0
+#define MX23_PAD_PWM4__PWM4				0x11e0
+#define MX23_PAD_SSP1_CMD__SSP1_CMD			0x2000
+#define MX23_PAD_SSP1_DETECT__SSP1_DETECT		0x2010
+#define MX23_PAD_SSP1_DATA0__SSP1_DATA0			0x2020
+#define MX23_PAD_SSP1_DATA1__SSP1_DATA1			0x2030
+#define MX23_PAD_SSP1_DATA2__SSP1_DATA2			0x2040
+#define MX23_PAD_SSP1_DATA3__SSP1_DATA3			0x2050
+#define MX23_PAD_SSP1_SCK__SSP1_SCK			0x2060
+#define MX23_PAD_ROTARYA__ROTARYA			0x2070
+#define MX23_PAD_ROTARYB__ROTARYB			0x2080
+#define MX23_PAD_EMI_A00__EMI_A00			0x2090
+#define MX23_PAD_EMI_A01__EMI_A01			0x20a0
+#define MX23_PAD_EMI_A02__EMI_A02			0x20b0
+#define MX23_PAD_EMI_A03__EMI_A03			0x20c0
+#define MX23_PAD_EMI_A04__EMI_A04			0x20d0
+#define MX23_PAD_EMI_A05__EMI_A05			0x20e0
+#define MX23_PAD_EMI_A06__EMI_A06			0x20f0
+#define MX23_PAD_EMI_A07__EMI_A07			0x2100
+#define MX23_PAD_EMI_A08__EMI_A08			0x2110
+#define MX23_PAD_EMI_A09__EMI_A09			0x2120
+#define MX23_PAD_EMI_A10__EMI_A10			0x2130
+#define MX23_PAD_EMI_A11__EMI_A11			0x2140
+#define MX23_PAD_EMI_A12__EMI_A12			0x2150
+#define MX23_PAD_EMI_BA0__EMI_BA0			0x2160
+#define MX23_PAD_EMI_BA1__EMI_BA1			0x2170
+#define MX23_PAD_EMI_CASN__EMI_CASN			0x2180
+#define MX23_PAD_EMI_CE0N__EMI_CE0N			0x2190
+#define MX23_PAD_EMI_CE1N__EMI_CE1N			0x21a0
+#define MX23_PAD_GPMI_CE1N__GPMI_CE1N			0x21b0
+#define MX23_PAD_GPMI_CE0N__GPMI_CE0N			0x21c0
+#define MX23_PAD_EMI_CKE__EMI_CKE			0x21d0
+#define MX23_PAD_EMI_RASN__EMI_RASN			0x21e0
+#define MX23_PAD_EMI_WEN__EMI_WEN			0x21f0
+#define MX23_PAD_EMI_D00__EMI_D00			0x3000
+#define MX23_PAD_EMI_D01__EMI_D01			0x3010
+#define MX23_PAD_EMI_D02__EMI_D02			0x3020
+#define MX23_PAD_EMI_D03__EMI_D03			0x3030
+#define MX23_PAD_EMI_D04__EMI_D04			0x3040
+#define MX23_PAD_EMI_D05__EMI_D05			0x3050
+#define MX23_PAD_EMI_D06__EMI_D06			0x3060
+#define MX23_PAD_EMI_D07__EMI_D07			0x3070
+#define MX23_PAD_EMI_D08__EMI_D08			0x3080
+#define MX23_PAD_EMI_D09__EMI_D09			0x3090
+#define MX23_PAD_EMI_D10__EMI_D10			0x30a0
+#define MX23_PAD_EMI_D11__EMI_D11			0x30b0
+#define MX23_PAD_EMI_D12__EMI_D12			0x30c0
+#define MX23_PAD_EMI_D13__EMI_D13			0x30d0
+#define MX23_PAD_EMI_D14__EMI_D14			0x30e0
+#define MX23_PAD_EMI_D15__EMI_D15			0x30f0
+#define MX23_PAD_EMI_DQM0__EMI_DQM0			0x3100
+#define MX23_PAD_EMI_DQM1__EMI_DQM1			0x3110
+#define MX23_PAD_EMI_DQS0__EMI_DQS0			0x3120
+#define MX23_PAD_EMI_DQS1__EMI_DQS1			0x3130
+#define MX23_PAD_EMI_CLK__EMI_CLK			0x3140
+#define MX23_PAD_EMI_CLKN__EMI_CLKN			0x3150
+#define MX23_PAD_GPMI_D00__LCD_D8			0x0001
+#define MX23_PAD_GPMI_D01__LCD_D9			0x0011
+#define MX23_PAD_GPMI_D02__LCD_D10			0x0021
+#define MX23_PAD_GPMI_D03__LCD_D11			0x0031
+#define MX23_PAD_GPMI_D04__LCD_D12			0x0041
+#define MX23_PAD_GPMI_D05__LCD_D13			0x0051
+#define MX23_PAD_GPMI_D06__LCD_D14			0x0061
+#define MX23_PAD_GPMI_D07__LCD_D15			0x0071
+#define MX23_PAD_GPMI_D08__LCD_D18			0x0081
+#define MX23_PAD_GPMI_D09__LCD_D19			0x0091
+#define MX23_PAD_GPMI_D10__LCD_D20			0x00a1
+#define MX23_PAD_GPMI_D11__LCD_D21			0x00b1
+#define MX23_PAD_GPMI_D12__LCD_D22			0x00c1
+#define MX23_PAD_GPMI_D13__LCD_D23			0x00d1
+#define MX23_PAD_GPMI_D14__AUART2_RX			0x00e1
+#define MX23_PAD_GPMI_D15__AUART2_TX			0x00f1
+#define MX23_PAD_GPMI_CLE__LCD_D16			0x0101
+#define MX23_PAD_GPMI_ALE__LCD_D17			0x0111
+#define MX23_PAD_GPMI_CE2N__ATA_A2			0x0121
+#define MX23_PAD_AUART1_RTS__IR_CLK			0x01b1
+#define MX23_PAD_AUART1_RX__IR_RX			0x01c1
+#define MX23_PAD_AUART1_TX__IR_TX			0x01d1
+#define MX23_PAD_I2C_SCL__GPMI_RDY2			0x01e1
+#define MX23_PAD_I2C_SDA__GPMI_CE2N			0x01f1
+#define MX23_PAD_LCD_D00__ETM_DA8			0x1001
+#define MX23_PAD_LCD_D01__ETM_DA9			0x1011
+#define MX23_PAD_LCD_D02__ETM_DA10			0x1021
+#define MX23_PAD_LCD_D03__ETM_DA11			0x1031
+#define MX23_PAD_LCD_D04__ETM_DA12			0x1041
+#define MX23_PAD_LCD_D05__ETM_DA13			0x1051
+#define MX23_PAD_LCD_D06__ETM_DA14			0x1061
+#define MX23_PAD_LCD_D07__ETM_DA15			0x1071
+#define MX23_PAD_LCD_D08__ETM_DA0			0x1081
+#define MX23_PAD_LCD_D09__ETM_DA1			0x1091
+#define MX23_PAD_LCD_D10__ETM_DA2			0x10a1
+#define MX23_PAD_LCD_D11__ETM_DA3			0x10b1
+#define MX23_PAD_LCD_D12__ETM_DA4			0x10c1
+#define MX23_PAD_LCD_D13__ETM_DA5			0x10d1
+#define MX23_PAD_LCD_D14__ETM_DA6			0x10e1
+#define MX23_PAD_LCD_D15__ETM_DA7			0x10f1
+#define MX23_PAD_LCD_RESET__ETM_TCTL			0x1121
+#define MX23_PAD_LCD_RS__ETM_TCLK			0x1131
+#define MX23_PAD_LCD_DOTCK__GPMI_RDY3			0x1161
+#define MX23_PAD_LCD_ENABLE__I2C_SCL			0x1171
+#define MX23_PAD_LCD_HSYNC__I2C_SDA			0x1181
+#define MX23_PAD_LCD_VSYNC__LCD_BUSY			0x1191
+#define MX23_PAD_PWM0__ROTARYA				0x11a1
+#define MX23_PAD_PWM1__ROTARYB				0x11b1
+#define MX23_PAD_PWM2__GPMI_RDY3			0x11c1
+#define MX23_PAD_PWM3__ETM_TCTL				0x11d1
+#define MX23_PAD_PWM4__ETM_TCLK				0x11e1
+#define MX23_PAD_SSP1_DETECT__GPMI_CE3N			0x2011
+#define MX23_PAD_SSP1_DATA1__I2C_SCL			0x2031
+#define MX23_PAD_SSP1_DATA2__I2C_SDA			0x2041
+#define MX23_PAD_ROTARYA__AUART2_RTS			0x2071
+#define MX23_PAD_ROTARYB__AUART2_CTS			0x2081
+#define MX23_PAD_GPMI_D00__SSP2_DATA0			0x0002
+#define MX23_PAD_GPMI_D01__SSP2_DATA1			0x0012
+#define MX23_PAD_GPMI_D02__SSP2_DATA2			0x0022
+#define MX23_PAD_GPMI_D03__SSP2_DATA3			0x0032
+#define MX23_PAD_GPMI_D04__SSP2_DATA4			0x0042
+#define MX23_PAD_GPMI_D05__SSP2_DATA5			0x0052
+#define MX23_PAD_GPMI_D06__SSP2_DATA6			0x0062
+#define MX23_PAD_GPMI_D07__SSP2_DATA7			0x0072
+#define MX23_PAD_GPMI_D08__SSP1_DATA4			0x0082
+#define MX23_PAD_GPMI_D09__SSP1_DATA5			0x0092
+#define MX23_PAD_GPMI_D10__SSP1_DATA6			0x00a2
+#define MX23_PAD_GPMI_D11__SSP1_DATA7			0x00b2
+#define MX23_PAD_GPMI_D15__GPMI_CE3N			0x00f2
+#define MX23_PAD_GPMI_RDY0__SSP2_DETECT			0x0132
+#define MX23_PAD_GPMI_RDY1__SSP2_CMD			0x0142
+#define MX23_PAD_GPMI_WRN__SSP2_SCK			0x0182
+#define MX23_PAD_AUART1_CTS__SSP1_DATA4			0x01a2
+#define MX23_PAD_AUART1_RTS__SSP1_DATA5			0x01b2
+#define MX23_PAD_AUART1_RX__SSP1_DATA6			0x01c2
+#define MX23_PAD_AUART1_TX__SSP1_DATA7			0x01d2
+#define MX23_PAD_I2C_SCL__AUART1_TX			0x01e2
+#define MX23_PAD_I2C_SDA__AUART1_RX			0x01f2
+#define MX23_PAD_LCD_D08__SAIF2_SDATA0			0x1082
+#define MX23_PAD_LCD_D09__SAIF1_SDATA0			0x1092
+#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK		0x10a2
+#define MX23_PAD_LCD_D11__SAIF_LRCLK			0x10b2
+#define MX23_PAD_LCD_D12__SAIF2_SDATA1			0x10c2
+#define MX23_PAD_LCD_D13__SAIF2_SDATA2			0x10d2
+#define MX23_PAD_LCD_D14__SAIF1_SDATA2			0x10e2
+#define MX23_PAD_LCD_D15__SAIF1_SDATA1			0x10f2
+#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK		0x1102
+#define MX23_PAD_LCD_RESET__GPMI_CE3N			0x1122
+#define MX23_PAD_PWM0__DUART_RX				0x11a2
+#define MX23_PAD_PWM1__DUART_TX				0x11b2
+#define MX23_PAD_PWM3__AUART1_CTS			0x11d2
+#define MX23_PAD_PWM4__AUART1_RTS			0x11e2
+#define MX23_PAD_SSP1_CMD__JTAG_TDO			0x2002
+#define MX23_PAD_SSP1_DETECT__USB_OTG_ID		0x2012
+#define MX23_PAD_SSP1_DATA0__JTAG_TDI			0x2022
+#define MX23_PAD_SSP1_DATA1__JTAG_TCLK			0x2032
+#define MX23_PAD_SSP1_DATA2__JTAG_RTCK			0x2042
+#define MX23_PAD_SSP1_DATA3__JTAG_TMS			0x2052
+#define MX23_PAD_SSP1_SCK__JTAG_TRST			0x2062
+#define MX23_PAD_ROTARYA__SPDIF				0x2072
+#define MX23_PAD_ROTARYB__GPMI_CE3N			0x2082
+#define MX23_PAD_GPMI_D00__GPIO_0_0			0x0003
+#define MX23_PAD_GPMI_D01__GPIO_0_1			0x0013
+#define MX23_PAD_GPMI_D02__GPIO_0_2			0x0023
+#define MX23_PAD_GPMI_D03__GPIO_0_3			0x0033
+#define MX23_PAD_GPMI_D04__GPIO_0_4			0x0043
+#define MX23_PAD_GPMI_D05__GPIO_0_5			0x0053
+#define MX23_PAD_GPMI_D06__GPIO_0_6			0x0063
+#define MX23_PAD_GPMI_D07__GPIO_0_7			0x0073
+#define MX23_PAD_GPMI_D08__GPIO_0_8			0x0083
+#define MX23_PAD_GPMI_D09__GPIO_0_9			0x0093
+#define MX23_PAD_GPMI_D10__GPIO_0_10			0x00a3
+#define MX23_PAD_GPMI_D11__GPIO_0_11			0x00b3
+#define MX23_PAD_GPMI_D12__GPIO_0_12			0x00c3
+#define MX23_PAD_GPMI_D13__GPIO_0_13			0x00d3
+#define MX23_PAD_GPMI_D14__GPIO_0_14			0x00e3
+#define MX23_PAD_GPMI_D15__GPIO_0_15			0x00f3
+#define MX23_PAD_GPMI_CLE__GPIO_0_16			0x0103
+#define MX23_PAD_GPMI_ALE__GPIO_0_17			0x0113
+#define MX23_PAD_GPMI_CE2N__GPIO_0_18			0x0123
+#define MX23_PAD_GPMI_RDY0__GPIO_0_19			0x0133
+#define MX23_PAD_GPMI_RDY1__GPIO_0_20			0x0143
+#define MX23_PAD_GPMI_RDY2__GPIO_0_21			0x0153
+#define MX23_PAD_GPMI_RDY3__GPIO_0_22			0x0163
+#define MX23_PAD_GPMI_WPN__GPIO_0_23			0x0173
+#define MX23_PAD_GPMI_WRN__GPIO_0_24			0x0183
+#define MX23_PAD_GPMI_RDN__GPIO_0_25			0x0193
+#define MX23_PAD_AUART1_CTS__GPIO_0_26			0x01a3
+#define MX23_PAD_AUART1_RTS__GPIO_0_27			0x01b3
+#define MX23_PAD_AUART1_RX__GPIO_0_28			0x01c3
+#define MX23_PAD_AUART1_TX__GPIO_0_29			0x01d3
+#define MX23_PAD_I2C_SCL__GPIO_0_30			0x01e3
+#define MX23_PAD_I2C_SDA__GPIO_0_31			0x01f3
+#define MX23_PAD_LCD_D00__GPIO_1_0			0x1003
+#define MX23_PAD_LCD_D01__GPIO_1_1			0x1013
+#define MX23_PAD_LCD_D02__GPIO_1_2			0x1023
+#define MX23_PAD_LCD_D03__GPIO_1_3			0x1033
+#define MX23_PAD_LCD_D04__GPIO_1_4			0x1043
+#define MX23_PAD_LCD_D05__GPIO_1_5			0x1053
+#define MX23_PAD_LCD_D06__GPIO_1_6			0x1063
+#define MX23_PAD_LCD_D07__GPIO_1_7			0x1073
+#define MX23_PAD_LCD_D08__GPIO_1_8			0x1083
+#define MX23_PAD_LCD_D09__GPIO_1_9			0x1093
+#define MX23_PAD_LCD_D10__GPIO_1_10			0x10a3
+#define MX23_PAD_LCD_D11__GPIO_1_11			0x10b3
+#define MX23_PAD_LCD_D12__GPIO_1_12			0x10c3
+#define MX23_PAD_LCD_D13__GPIO_1_13			0x10d3
+#define MX23_PAD_LCD_D14__GPIO_1_14			0x10e3
+#define MX23_PAD_LCD_D15__GPIO_1_15			0x10f3
+#define MX23_PAD_LCD_D16__GPIO_1_16			0x1103
+#define MX23_PAD_LCD_D17__GPIO_1_17			0x1113
+#define MX23_PAD_LCD_RESET__GPIO_1_18			0x1123
+#define MX23_PAD_LCD_RS__GPIO_1_19			0x1133
+#define MX23_PAD_LCD_WR__GPIO_1_20			0x1143
+#define MX23_PAD_LCD_CS__GPIO_1_21			0x1153
+#define MX23_PAD_LCD_DOTCK__GPIO_1_22			0x1163
+#define MX23_PAD_LCD_ENABLE__GPIO_1_23			0x1173
+#define MX23_PAD_LCD_HSYNC__GPIO_1_24			0x1183
+#define MX23_PAD_LCD_VSYNC__GPIO_1_25			0x1193
+#define MX23_PAD_PWM0__GPIO_1_26			0x11a3
+#define MX23_PAD_PWM1__GPIO_1_27			0x11b3
+#define MX23_PAD_PWM2__GPIO_1_28			0x11c3
+#define MX23_PAD_PWM3__GPIO_1_29			0x11d3
+#define MX23_PAD_PWM4__GPIO_1_30			0x11e3
+#define MX23_PAD_SSP1_CMD__GPIO_2_0			0x2003
+#define MX23_PAD_SSP1_DETECT__GPIO_2_1			0x2013
+#define MX23_PAD_SSP1_DATA0__GPIO_2_2			0x2023
+#define MX23_PAD_SSP1_DATA1__GPIO_2_3			0x2033
+#define MX23_PAD_SSP1_DATA2__GPIO_2_4			0x2043
+#define MX23_PAD_SSP1_DATA3__GPIO_2_5			0x2053
+#define MX23_PAD_SSP1_SCK__GPIO_2_6			0x2063
+#define MX23_PAD_ROTARYA__GPIO_2_7			0x2073
+#define MX23_PAD_ROTARYB__GPIO_2_8			0x2083
+#define MX23_PAD_EMI_A00__GPIO_2_9			0x2093
+#define MX23_PAD_EMI_A01__GPIO_2_10			0x20a3
+#define MX23_PAD_EMI_A02__GPIO_2_11			0x20b3
+#define MX23_PAD_EMI_A03__GPIO_2_12			0x20c3
+#define MX23_PAD_EMI_A04__GPIO_2_13			0x20d3
+#define MX23_PAD_EMI_A05__GPIO_2_14			0x20e3
+#define MX23_PAD_EMI_A06__GPIO_2_15			0x20f3
+#define MX23_PAD_EMI_A07__GPIO_2_16			0x2103
+#define MX23_PAD_EMI_A08__GPIO_2_17			0x2113
+#define MX23_PAD_EMI_A09__GPIO_2_18			0x2123
+#define MX23_PAD_EMI_A10__GPIO_2_19			0x2133
+#define MX23_PAD_EMI_A11__GPIO_2_20			0x2143
+#define MX23_PAD_EMI_A12__GPIO_2_21			0x2153
+#define MX23_PAD_EMI_BA0__GPIO_2_22			0x2163
+#define MX23_PAD_EMI_BA1__GPIO_2_23			0x2173
+#define MX23_PAD_EMI_CASN__GPIO_2_24			0x2183
+#define MX23_PAD_EMI_CE0N__GPIO_2_25			0x2193
+#define MX23_PAD_EMI_CE1N__GPIO_2_26			0x21a3
+#define MX23_PAD_GPMI_CE1N__GPIO_2_27			0x21b3
+#define MX23_PAD_GPMI_CE0N__GPIO_2_28			0x21c3
+#define MX23_PAD_EMI_CKE__GPIO_2_29			0x21d3
+#define MX23_PAD_EMI_RASN__GPIO_2_30			0x21e3
+#define MX23_PAD_EMI_WEN__GPIO_2_31			0x21f3
+
+#endif /* __DT_BINDINGS_MX23_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
index 85c3864..cb64e2b 100644
--- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts
+++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx23.dtsi"
+#include "imx23.dtsi"
 
 / {
 	model = "Freescale STMP378x Development Board";
@@ -39,12 +39,12 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
-						0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
+						MX23_PAD_PWM3__GPIO_1_29
+						MX23_PAD_PWM4__GPIO_1_30
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 587ceef..c96ceae 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -9,7 +9,8 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+#include "imx23-pinfunc.h"
 
 / {
 	interrupt-parent = <&icoll>;
@@ -20,6 +21,8 @@
 		gpio2 = &gpio2;
 		serial0 = &auart0;
 		serial1 = &auart1;
+		spi0 = &ssp0;
+		spi1 = &ssp1;
 	};
 
 	cpus {
@@ -76,23 +79,21 @@
 				#size-cells = <1>;
 				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
 				reg-names = "gpmi-nand", "bch";
-				interrupts = <13>, <56>;
-				interrupt-names = "gpmi-dma", "bch";
+				interrupts = <56>;
+				interrupt-names = "bch";
 				clocks = <&clks 34>;
 				clock-names = "gpmi_io";
 				dmas = <&dma_apbh 4>;
 				dma-names = "rx-tx";
-				fsl,gpmi-dma-channel = <4>;
 				status = "disabled";
 			};
 
 			ssp0: ssp@80010000 {
 				reg = <0x80010000 0x2000>;
-				interrupts = <15 14>;
+				interrupts = <15>;
 				clocks = <&clks 33>;
 				dmas = <&dma_apbh 1>;
 				dma-names = "rx-tx";
-				fsl,ssp-dma-channel = <1>;
 				status = "disabled";
 			};
 
@@ -137,174 +138,174 @@
 				duart_pins_a: duart@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x11a2 /* MX23_PAD_PWM0__DUART_RX */
-						0x11b2 /* MX23_PAD_PWM1__DUART_TX */
+						MX23_PAD_PWM0__DUART_RX
+						MX23_PAD_PWM1__DUART_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart0_pins_a: auart0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x01c0 /* MX23_PAD_AUART1_RX__AUART1_RX */
-						0x01d0 /* MX23_PAD_AUART1_TX__AUART1_TX */
-						0x01a0 /* MX23_PAD_AUART1_CTS__AUART1_CTS */
-						0x01b0 /* MX23_PAD_AUART1_RTS__AUART1_RTS */
+						MX23_PAD_AUART1_RX__AUART1_RX
+						MX23_PAD_AUART1_TX__AUART1_TX
+						MX23_PAD_AUART1_CTS__AUART1_CTS
+						MX23_PAD_AUART1_RTS__AUART1_RTS
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart0_2pins_a: auart0-2pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x01e2 /* MX23_PAD_I2C_SCL__AUART1_TX */
-						0x01f2 /* MX23_PAD_I2C_SDA__AUART1_RX */
+						MX23_PAD_I2C_SCL__AUART1_TX
+						MX23_PAD_I2C_SDA__AUART1_RX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				gpmi_pins_a: gpmi-nand@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0000 /* MX23_PAD_GPMI_D00__GPMI_D00 */
-						0x0010 /* MX23_PAD_GPMI_D01__GPMI_D01 */
-						0x0020 /* MX23_PAD_GPMI_D02__GPMI_D02 */
-						0x0030 /* MX23_PAD_GPMI_D03__GPMI_D03 */
-						0x0040 /* MX23_PAD_GPMI_D04__GPMI_D04 */
-						0x0050 /* MX23_PAD_GPMI_D05__GPMI_D05 */
-						0x0060 /* MX23_PAD_GPMI_D06__GPMI_D06 */
-						0x0070 /* MX23_PAD_GPMI_D07__GPMI_D07 */
-						0x0100 /* MX23_PAD_GPMI_CLE__GPMI_CLE */
-						0x0110 /* MX23_PAD_GPMI_ALE__GPMI_ALE */
-						0x0130 /* MX23_PAD_GPMI_RDY0__GPMI_RDY0 */
-						0x0140 /* MX23_PAD_GPMI_RDY1__GPMI_RDY1 */
-						0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
-						0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
-						0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
-						0x21b0 /* MX23_PAD_GPMI_CE1N__GPMI_CE1N */
-						0x21c0 /* MX23_PAD_GPMI_CE0N__GPMI_CE0N	*/
+						MX23_PAD_GPMI_D00__GPMI_D00
+						MX23_PAD_GPMI_D01__GPMI_D01
+						MX23_PAD_GPMI_D02__GPMI_D02
+						MX23_PAD_GPMI_D03__GPMI_D03
+						MX23_PAD_GPMI_D04__GPMI_D04
+						MX23_PAD_GPMI_D05__GPMI_D05
+						MX23_PAD_GPMI_D06__GPMI_D06
+						MX23_PAD_GPMI_D07__GPMI_D07
+						MX23_PAD_GPMI_CLE__GPMI_CLE
+						MX23_PAD_GPMI_ALE__GPMI_ALE
+						MX23_PAD_GPMI_RDY0__GPMI_RDY0
+						MX23_PAD_GPMI_RDY1__GPMI_RDY1
+						MX23_PAD_GPMI_WPN__GPMI_WPN
+						MX23_PAD_GPMI_WRN__GPMI_WRN
+						MX23_PAD_GPMI_RDN__GPMI_RDN
+						MX23_PAD_GPMI_CE1N__GPMI_CE1N
+						MX23_PAD_GPMI_CE0N__GPMI_CE0N
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				gpmi_pins_fixup: gpmi-pins-fixup {
 					fsl,pinmux-ids = <
-						0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
-						0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
-						0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
+						MX23_PAD_GPMI_WPN__GPMI_WPN
+						MX23_PAD_GPMI_WRN__GPMI_WRN
+						MX23_PAD_GPMI_RDN__GPMI_RDN
 					>;
-					fsl,drive-strength = <2>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
 				};
 
 				mmc0_4bit_pins_a: mmc0-4bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
-						0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
-						0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
-						0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
-						0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
-						0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
+						MX23_PAD_SSP1_DATA0__SSP1_DATA0
+						MX23_PAD_SSP1_DATA1__SSP1_DATA1
+						MX23_PAD_SSP1_DATA2__SSP1_DATA2
+						MX23_PAD_SSP1_DATA3__SSP1_DATA3
+						MX23_PAD_SSP1_CMD__SSP1_CMD
+						MX23_PAD_SSP1_SCK__SSP1_SCK
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mmc0_8bit_pins_a: mmc0-8bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
-						0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
-						0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
-						0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
-						0x0082 /* MX23_PAD_GPMI_D08__SSP1_DATA4 */
-						0x0092 /* MX23_PAD_GPMI_D09__SSP1_DATA5 */
-						0x00a2 /* MX23_PAD_GPMI_D10__SSP1_DATA6 */
-						0x00b2 /* MX23_PAD_GPMI_D11__SSP1_DATA7 */
-						0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
-						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
-						0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
+						MX23_PAD_SSP1_DATA0__SSP1_DATA0
+						MX23_PAD_SSP1_DATA1__SSP1_DATA1
+						MX23_PAD_SSP1_DATA2__SSP1_DATA2
+						MX23_PAD_SSP1_DATA3__SSP1_DATA3
+						MX23_PAD_GPMI_D08__SSP1_DATA4
+						MX23_PAD_GPMI_D09__SSP1_DATA5
+						MX23_PAD_GPMI_D10__SSP1_DATA6
+						MX23_PAD_GPMI_D11__SSP1_DATA7
+						MX23_PAD_SSP1_CMD__SSP1_CMD
+						MX23_PAD_SSP1_DETECT__SSP1_DETECT
+						MX23_PAD_SSP1_SCK__SSP1_SCK
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mmc0_pins_fixup: mmc0-pins-fixup {
 					fsl,pinmux-ids = <
-						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
-						0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
+						MX23_PAD_SSP1_DETECT__SSP1_DETECT
+						MX23_PAD_SSP1_SCK__SSP1_SCK
 					>;
-					fsl,pull-up = <0>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				pwm2_pins_a: pwm2@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x11c0 /* MX23_PAD_PWM2__PWM2 */
+						MX23_PAD_PWM2__PWM2
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_24bit_pins_a: lcdif-24bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX23_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX23_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX23_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX23_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX23_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX23_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX23_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX23_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX23_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX23_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX23_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX23_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX23_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX23_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX23_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX23_PAD_LCD_D15__LCD_D15 */
-						0x1100 /* MX23_PAD_LCD_D16__LCD_D16 */
-						0x1110 /* MX23_PAD_LCD_D17__LCD_D17 */
-						0x0081 /* MX23_PAD_GPMI_D08__LCD_D18 */
-						0x0091 /* MX23_PAD_GPMI_D09__LCD_D19 */
-						0x00a1 /* MX23_PAD_GPMI_D10__LCD_D20 */
-						0x00b1 /* MX23_PAD_GPMI_D11__LCD_D21 */
-						0x00c1 /* MX23_PAD_GPMI_D12__LCD_D22 */
-						0x00d1 /* MX23_PAD_GPMI_D13__LCD_D23 */
-						0x1160 /* MX23_PAD_LCD_DOTCK__LCD_DOTCK */
-						0x1170 /* MX23_PAD_LCD_ENABLE__LCD_ENABLE */
-						0x1180 /* MX23_PAD_LCD_HSYNC__LCD_HSYNC */
-						0x1190 /* MX23_PAD_LCD_VSYNC__LCD_VSYNC */
+						MX23_PAD_LCD_D00__LCD_D00
+						MX23_PAD_LCD_D01__LCD_D01
+						MX23_PAD_LCD_D02__LCD_D02
+						MX23_PAD_LCD_D03__LCD_D03
+						MX23_PAD_LCD_D04__LCD_D04
+						MX23_PAD_LCD_D05__LCD_D05
+						MX23_PAD_LCD_D06__LCD_D06
+						MX23_PAD_LCD_D07__LCD_D07
+						MX23_PAD_LCD_D08__LCD_D08
+						MX23_PAD_LCD_D09__LCD_D09
+						MX23_PAD_LCD_D10__LCD_D10
+						MX23_PAD_LCD_D11__LCD_D11
+						MX23_PAD_LCD_D12__LCD_D12
+						MX23_PAD_LCD_D13__LCD_D13
+						MX23_PAD_LCD_D14__LCD_D14
+						MX23_PAD_LCD_D15__LCD_D15
+						MX23_PAD_LCD_D16__LCD_D16
+						MX23_PAD_LCD_D17__LCD_D17
+						MX23_PAD_GPMI_D08__LCD_D18
+						MX23_PAD_GPMI_D09__LCD_D19
+						MX23_PAD_GPMI_D10__LCD_D20
+						MX23_PAD_GPMI_D11__LCD_D21
+						MX23_PAD_GPMI_D12__LCD_D22
+						MX23_PAD_GPMI_D13__LCD_D23
+						MX23_PAD_LCD_DOTCK__LCD_DOTCK
+						MX23_PAD_LCD_ENABLE__LCD_ENABLE
+						MX23_PAD_LCD_HSYNC__LCD_HSYNC
+						MX23_PAD_LCD_VSYNC__LCD_VSYNC
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				spi2_pins_a: spi2@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0182 /* MX23_PAD_GPMI_WRN__SSP2_SCK */
-						0x0142 /* MX23_PAD_GPMI_RDY1__SSP2_CMD */
-						0x0002 /* MX23_PAD_GPMI_D00__SSP2_DATA0 */
-						0x0032 /* MX23_PAD_GPMI_D03__SSP2_DATA3 */
+						MX23_PAD_GPMI_WRN__SSP2_SCK
+						MX23_PAD_GPMI_RDY1__SSP2_CMD
+						MX23_PAD_GPMI_D00__SSP2_DATA0
+						MX23_PAD_GPMI_D03__SSP2_DATA3
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 			};
 
@@ -366,11 +367,10 @@
 
 			ssp1: ssp@80034000 {
 				reg = <0x80034000 0x2000>;
-				interrupts = <2 20>;
+				interrupts = <2>;
 				clocks = <&clks 33>;
 				dmas = <&dma_apbh 2>;
 				dma-names = "rx-tx";
-				fsl,ssp-dma-channel = <2>;
 				status = "disabled";
 			};
 
@@ -431,6 +431,7 @@
 				reg = <0x80050000 0x2000>;
 				interrupts = <36 37 38 39 40 41 42 43 44>;
 				status = "disabled";
+				clocks = <&clks 26>;
 			};
 
 			spdif@80054000 {
@@ -472,7 +473,7 @@
 			auart0: serial@8006c000 {
 				compatible = "fsl,imx23-auart";
 				reg = <0x8006c000 0x2000>;
-				interrupts = <24 25 23>;
+				interrupts = <24>;
 				clocks = <&clks 32>;
 				dmas = <&dma_apbx 6>, <&dma_apbx 7>;
 				dma-names = "rx", "tx";
@@ -482,7 +483,7 @@
 			auart1: serial@8006e000 {
 				compatible = "fsl,imx23-auart";
 				reg = <0x8006e000 0x2000>;
-				interrupts = <59 60 58>;
+				interrupts = <59>;
 				clocks = <&clks 32>;
 				dmas = <&dma_apbx 8>, <&dma_apbx 9>;
 				dma-names = "rx", "tx";
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 7011539..737ed5d 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -13,19 +13,35 @@
 
 / {
 	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
 		serial3 = &uart4;
 		serial4 = &uart5;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
+		spi0 = &spi1;
+		spi1 = &spi2;
+		spi2 = &spi3;
 		usb0 = &usbotg;
 		usb1 = &usbhost1;
 	};
 
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
 	asic: asic-interrupt-controller@68000000 {
 		compatible = "fsl,imx25-asic", "fsl,avic";
 		interrupt-controller;
@@ -377,7 +393,8 @@
 				status = "disabled";
 			};
 
-			lcdc@53fbc000 {
+			lcdc: lcdc@53fbc000 {
+				compatible = "fsl,imx25-fb", "fsl,imx21-fb";
 				reg = <0x53fbc000 0x4000>;
 				interrupts = <39>;
 				clocks = <&clks 103>, <&clks 66>, <&clks 49>;
@@ -424,6 +441,7 @@
 				reg = <0x53fd4000 0x4000>;
 				clocks = <&clks 112>, <&clks 68>;
 				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
 				interrupts = <34>;
 			};
 
@@ -444,6 +462,13 @@
 				interrupts = <26>;
 			};
 
+			iim: iim@53ff0000 {
+				compatible = "fsl,imx25-iim", "fsl,imx27-iim";
+				reg = <0x53ff0000 0x4000>;
+				interrupts = <19>;
+				clocks = <&clks 99>;
+			};
+
 			usbphy1: usbphy@1 {
 				compatible = "nop-usbphy";
 				status = "disabled";
diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts
index 66b8e1c..47c8c26 100644
--- a/arch/arm/boot/dts/imx27-apf27dev.dts
+++ b/arch/arm/boot/dts/imx27-apf27dev.dts
@@ -16,6 +16,26 @@
 	model = "Armadeus Systems APF27Dev docking/development board";
 	compatible = "armadeus,imx27-apf27dev", "armadeus,imx27-apf27", "fsl,imx27";
 
+	display: display {
+		model = "Chimei-LW700AT9003";
+		native-mode = <&timing0>;
+		bits-per-pixel = <16>;  /* non-standard but required */
+		fsl,pcr = <0xfae80083>;	/* non-standard but required */
+		display-timings {
+			timing0: 640x480 {
+				clock-frequency = <33000033>;
+				hactive = <800>;
+				vactive = <640>;
+				hback-porch = <96>;
+				hfront-porch = <96>;
+				vback-porch = <20>;
+				vfront-porch = <21>;
+				hsync-len = <64>;
+				vsync-len = <4>;
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -50,9 +70,20 @@
 	status = "okay";
 };
 
+&fb {
+	display = <&display>;
+	fsl,dmacr = <0x00020010>;
+	status = "okay";
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,ds1374";
+		reg = <0x68>;
+	};
 };
 
 &i2c2 {
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
new file mode 100644
index 0000000..5a31c77
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2012 Markus Pargmann, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx27-phytec-phycard-s-som.dts"
+
+/ {
+	model = "Phytec pca100 rapid development kit";
+	compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27";
+
+	display: display {
+		model = "Primeview-PD050VL1";
+		native-mode = <&timing0>;
+		bits-per-pixel = <16>;  /* non-standard but required */
+		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
+		display-timings {
+			timing0: 640x480 {
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <112>;
+				hfront-porch = <36>;
+				hsync-len = <32>;
+				vback-porch = <33>;
+				vfront-porch = <33>;
+				vsync-len = <2>;
+				clock-frequency = <25000000>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_3v3: 3v3 {
+			compatible = "regulator-fixed";
+			regulator-name = "3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&fb {
+	display = <&display>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	adc@64 {
+		compatible = "maxim,max1037";
+		vcc-supply = <&reg_3v3>;
+		reg = <0x64>;
+	};
+};
+
+&owire {
+	status = "okay";
+};
+
+&sdhci2 {
+	cd-gpios = <&gpio3 29 0>;
+	status = "okay";
+};
+
+&uart1 {
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts
new file mode 100644
index 0000000..c8d57d1
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
+ * and Markus Pargmann, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Phytec pca100";
+	compatible = "phytec,imx27-pca100", "fsl,imx27";
+
+	memory {
+		reg = <0xa0000000 0x08000000>; /* 128MB */
+	};
+};
+
+&cspi1 {
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <&gpio4 28 0>,
+		<&gpio4 27 0>;
+	status = "okay";
+};
+
+&fec {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	at24@52 {
+		compatible = "at,24c32";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
index e7ed978..0fc6551 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@@ -35,3 +35,16 @@
 	fsl,uart-has-rtscts;
 	status = "okay";
 };
+
+&weim {
+	can@d4000000 {
+		compatible = "nxp,sja1000";
+		reg = <4 0x00000000 0x00000100>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <19 0x2>;
+		nxp,external-clock-frequency = <16000000>;
+		nxp,tx-output-config = <0x16>;
+		nxp,no-comparator-bypass;
+		fsl,weim-cs-timing = <0x0000dcf6 0x444a0301 0x44443302>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts b/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
index f010565..4ec402c 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
@@ -17,49 +17,22 @@
 	compatible = "phytec,imx27-pcm038", "fsl,imx27";
 
 	memory {
-		reg = <0x0 0x0>;
+		reg = <0xa0000000 0x08000000>;
 	};
+};
 
-	soc {
-		aipi@10000000 { /* aipi1 */
-			serial@1000a000 {
-				status = "okay";
-			};
-
-			i2c@1001d000 {
-				clock-frequency = <400000>;
-				status = "okay";
-				at24@52 {
-					compatible = "at,24c32";
-					pagesize = <32>;
-					reg = <0x52>;
-				};
-				pcf8563@51 {
-					compatible = "nxp,pcf8563";
-					reg = <0x51>;
-				};
-				lm75@4a {
-					compatible = "national,lm75";
-					reg = <0x4a>;
-				};
-			};
-		};
+&audmux {
+	status = "okay";
 
-		aipi@10020000 { /* aipi2 */
-			ethernet@1002b000 {
-				phy-reset-gpios = <&gpio3 30 0>;
-				status = "okay";
-			};
-		};
+	/* SSI0 <=> PINS_4 (MC13783 Audio) */
+	ssi0 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <0xcb205000>;
 	};
 
-	nor_flash@c0000000 {
-		compatible = "cfi-flash";
-		bank-width = <2>;
-		reg = <0xc0000000 0x02000000>;
-		linux,mtd-name = "physmap-flash.0";
-		#address-cells = <1>;
-		#size-cells = <1>;
+	pins4 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <0x00001000>;
 	};
 };
 
@@ -80,28 +53,16 @@
 		fsl,mc13xxx-uses-rtc;
 
 		regulators {
-			sw1a_reg: sw1a {
+			/* SW1A and SW1B joined operation */
+			sw1_reg: sw1a {
 				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
+				regulator-max-microvolt = <1520000>;
 				regulator-always-on;
 				regulator-boot-on;
 			};
 
-			sw1b_reg: sw1b {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			sw2a_reg: sw2a {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			sw2b_reg: sw2b {
+			/* SW2A and SW2B joined operation */
+			sw2_reg: sw2a {
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
@@ -172,8 +133,62 @@
 	};
 };
 
+&fec {
+	phy-reset-gpios = <&gpio3 30 0>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	at24@52 {
+		compatible = "at,24c32";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	lm75@4a {
+		compatible = "national,lm75";
+		reg = <0x4a>;
+	};
+};
+
 &nfc {
 	nand-bus-width = <8>;
 	nand-ecc-mode = "hw";
 	status = "okay";
 };
+
+&uart1 {
+	status = "okay";
+};
+
+&weim {
+	status = "okay";
+
+	nor: nor@c0000000 {
+		compatible = "cfi-flash";
+		reg = <0 0x00000000 0x02000000>;
+		bank-width = <2>;
+		linux,mtd-name = "physmap-flash.0";
+		fsl,weim-cs-timing = <0x22c2cf00 0x75000d01 0x00000900>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	sram: sram@c8000000 {
+		compatible = "mtd-ram";
+		reg = <1 0x00000000 0x00800000>;
+		bank-width = <2>;
+		linux,mtd-name = "mtd-ram.0";
+		fsl,weim-cs-timing = <0x0000d843 0x22252521 0x22220a00>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 0695264..826231e 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -13,25 +13,27 @@
 
 / {
 	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
 		gpio3 = &gpio4;
 		gpio4 = &gpio5;
 		gpio5 = &gpio6;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
 		spi0 = &cspi1;
 		spi1 = &cspi2;
 		spi2 = &cspi3;
 	};
 
-	avic: avic-interrupt-controller@e0000000 {
-		compatible = "fsl,imx27-avic", "fsl,avic";
+	aitc: aitc-interrupt-controller@e0000000 {
+		compatible = "fsl,imx27-aitc", "fsl,avic";
 		interrupt-controller;
 		#interrupt-cells = <1>;
 		reg = <0x10040000 0x1000>;
@@ -47,11 +49,29 @@
 		};
 	};
 
+	cpus {
+		#size-cells = <0>;
+		#address-cells = <1>;
+
+		cpu: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm926ej-s";
+			operating-points = <
+				/* kHz uV */
+				266000 1300000
+				399000 1450000
+			>;
+			clock-latency = <62500>;
+			clocks = <&clks 18>;
+			voltage-tolerance = <5>;
+		};
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
-		interrupt-parent = <&avic>;
+		interrupt-parent = <&aitc>;
 		ranges;
 
 		aipi@10000000 { /* AIPI1 */
@@ -75,7 +95,7 @@
 				compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
 				reg = <0x10002000 0x1000>;
 				interrupts = <27>;
-				clocks = <&clks 0>;
+				clocks = <&clks 74>;
 			};
 
 			gpt1: timer@10003000 {
@@ -102,7 +122,8 @@
 				clock-names = "ipg", "per";
 			};
 
-			pwm0: pwm@10006000 {
+			pwm: pwm@10006000 {
+				#pwm-cells = <2>;
 				compatible = "fsl,imx27-pwm";
 				reg = <0x10006000 0x1000>;
 				interrupts = <23>;
@@ -110,6 +131,21 @@
 				clock-names = "ipg", "per";
 			};
 
+			kpp: kpp@10008000 {
+				compatible = "fsl,imx27-kpp", "fsl,imx21-kpp";
+				reg = <0x10008000 0x1000>;
+				interrupts = <21>;
+				clocks = <&clks 37>;
+				status = "disabled";
+			};
+
+			owire: owire@10009000 {
+				compatible = "fsl,imx27-owire", "fsl,imx21-owire";
+				reg = <0x10009000 0x1000>;
+				clocks = <&clks 35>;
+				status = "disabled";
+			};
+
 			uart1: serial@1000a000 {
 				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 				reg = <0x1000a000 0x1000>;
@@ -152,7 +188,7 @@
 				compatible = "fsl,imx27-cspi";
 				reg = <0x1000e000 0x1000>;
 				interrupts = <16>;
-				clocks = <&clks 53>, <&clks 53>;
+				clocks = <&clks 53>, <&clks 60>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -163,7 +199,7 @@
 				compatible = "fsl,imx27-cspi";
 				reg = <0x1000f000 0x1000>;
 				interrupts = <15>;
-				clocks = <&clks 52>, <&clks 52>;
+				clocks = <&clks 52>, <&clks 60>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -260,13 +296,21 @@
 				#interrupt-cells = <2>;
 			};
 
+			audmux: audmux@10016000 {
+				compatible = "fsl,imx27-audmux", "fsl,imx21-audmux";
+				reg = <0x10016000 0x1000>;
+				clocks = <&clks 0>;
+				clock-names = "audmux";
+				status = "disabled";
+			};
+
 			cspi3: cspi@10017000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx27-cspi";
 				reg = <0x10017000 0x1000>;
 				interrupts = <6>;
-				clocks = <&clks 51>, <&clks 51>;
+				clocks = <&clks 51>, <&clks 60>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -342,6 +386,15 @@
 			reg = <0x10020000 0x20000>;
 			ranges;
 
+			fb: fb@10021000 {
+				compatible = "fsl,imx27-fb", "fsl,imx21-fb";
+				interrupts = <61>;
+				reg = <0x10021000 0x1000>;
+				clocks = <&clks 36>, <&clks 65>, <&clks 59>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
 			coda: coda@10023000 {
 				compatible = "fsl,imx27-vpu";
 				reg = <0x10023000 0x0200>;
@@ -351,27 +404,37 @@
 				iram = <&iram>;
 			};
 
+			sahara2: sahara@10025000 {
+				compatible = "fsl,imx27-sahara";
+				reg = <0x10025000 0x1000>;
+				interrupts = <59>;
+				clocks = <&clks 32>, <&clks 64>;
+				clock-names = "ipg", "ahb";
+			};
+
 			clks: ccm@10027000{
 				compatible = "fsl,imx27-ccm";
 				reg = <0x10027000 0x1000>;
 				#clock-cells = <1>;
 			};
 
+			iim: iim@10028000 {
+				compatible = "fsl,imx27-iim";
+				reg = <0x10028000 0x1000>;
+				interrupts = <62>;
+				clocks = <&clks 38>;
+			};
+
 			fec: ethernet@1002b000 {
 				compatible = "fsl,imx27-fec";
 				reg = <0x1002b000 0x4000>;
 				interrupts = <50>;
-				clocks = <&clks 48>, <&clks 67>, <&clks 0>;
-				clock-names = "ipg", "ahb", "ptp";
+				clocks = <&clks 48>, <&clks 67>;
+				clock-names = "ipg", "ahb";
 				status = "disabled";
 			};
 		};
 
-		iram: iram@ffff4c00 {
-			compatible = "mmio-sram";
-			reg = <0xffff4c00 0xb400>;
-		};
-
 		nfc: nand@d8000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -381,5 +444,27 @@
 			clocks = <&clks 54>;
 			status = "disabled";
 		};
+
+		weim: weim@d8002000 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			compatible = "fsl,imx27-weim";
+			reg = <0xd8002000 0x1000>;
+			clocks = <&clks 0>;
+			ranges = <
+				0 0 0xc0000000 0x08000000
+				1 0 0xc8000000 0x08000000
+				2 0 0xd0000000 0x02000000
+				3 0 0xd2000000 0x02000000
+				4 0 0xd4000000 0x02000000
+				5 0 0xd6000000 0x02000000
+			>;
+			status = "disabled";
+		};
+
+		iram: iram@ffff4c00 {
+			compatible = "mmio-sram";
+			reg = <0xffff4c00 0xb400>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts
index 7eb0758..7198fe3 100644
--- a/arch/arm/boot/dts/imx28-apf28.dts
+++ b/arch/arm/boot/dts/imx28-apf28.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "Armadeus Systems APF28 module";
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
index b602494..e2efd8d 100644
--- a/arch/arm/boot/dts/imx28-apf28dev.dts
+++ b/arch/arm/boot/dts/imx28-apf28dev.dts
@@ -10,7 +10,7 @@
  */
 
 /* APF28Dev is a docking board for the APF28 SOM */
-/include/ "imx28-apf28.dts"
+#include "imx28-apf28.dts"
 
 / {
 	model = "Armadeus Systems APF28Dev docking/development board";
@@ -41,30 +41,30 @@
 				hog_pins_apf28dev: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1103 /* MX28_PAD_LCD_D16__GPIO_1_16 */
-						0x1113 /* MX28_PAD_LCD_D17__GPIO_1_17 */
-						0x1123 /* MX28_PAD_LCD_D18__GPIO_1_18 */
-						0x1133 /* MX28_PAD_LCD_D19__GPIO_1_19 */
-						0x1143 /* MX28_PAD_LCD_D20__GPIO_1_20 */
-						0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */
-						0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
+						MX28_PAD_LCD_D16__GPIO_1_16
+						MX28_PAD_LCD_D17__GPIO_1_17
+						MX28_PAD_LCD_D18__GPIO_1_18
+						MX28_PAD_LCD_D19__GPIO_1_19
+						MX28_PAD_LCD_D20__GPIO_1_20
+						MX28_PAD_LCD_D21__GPIO_1_21
+						MX28_PAD_LCD_D22__GPIO_1_22
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_apf28dev: lcdif-apf28dev@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index 0e7fed4..6f254ca 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -1,5 +1,5 @@
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "Bluegiga APX4 Development Kit";
@@ -40,53 +40,53 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
-						0x0153 /* MX28_PAD_GPMI_RDY1__GPIO_0_21 */
-						0x2123 /* MX28_PAD_SSP2_MISO__GPIO_2_18 */
-						0x2131 /* MX28_PAD_SSP2_SS0__GPIO_2_19 */
-						0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
-						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
-						0x4143 /* MX28_PAD_JTAG_RTCK__GPIO_4_20 */
+						MX28_PAD_GPMI_CE1N__GPIO_0_17
+						MX28_PAD_GPMI_RDY1__GPIO_0_21
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
+						MX28_PAD_PWM3__GPIO_3_28
+						MX28_PAD_LCD_RESET__GPIO_3_30
+						MX28_PAD_JTAG_RTCK__GPIO_4_20
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_apx4: lcdif-apx4@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2041 /* MX28_PAD_SSP0_DATA4__SSP2_D0 */
-						0x2051 /* MX28_PAD_SSP0_DATA5__SSP2_D3 */
-						0x2061 /* MX28_PAD_SSP0_DATA6__SSP2_CMD */
-						0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */
-						0x2141 /* MX28_PAD_SSP2_SS1__SSP2_D1 */
-						0x2151 /* MX28_PAD_SSP2_SS2__SSP2_D2 */
+						MX28_PAD_SSP0_DATA4__SSP2_D0
+						MX28_PAD_SSP0_DATA5__SSP2_D3
+						MX28_PAD_SSP0_DATA6__SSP2_CMD
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
+						MX28_PAD_SSP2_SS1__SSP2_D1
+						MX28_PAD_SSP2_SS2__SSP2_D2
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 {
 					fsl,pinmux-ids = <
-						0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
 					>;
-					fsl,drive-strength = <2>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
index 94c4476..cabb617 100644
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "Crystalfontz CFA-10036 Board";
@@ -23,37 +23,34 @@
 	apb@80000000 {
 		apbh@80000000 {
 			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_cfa10036>;
-
-				hog_pins_cfa10036: hog-10036@0 {
+				ssd1306_cfa10036: ssd1306-10036@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2073 /* MX28_PAD_SSP0_D7__GPIO_2_7 */
+						MX28_PAD_SSP0_DATA7__GPIO_2_7
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				led_pins_cfa10036: leds-10036@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3043 /* MX28_PAD_AUART1_RX__GPIO_3_4 */
+						MX28_PAD_AUART1_RX__GPIO_3_4
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				usb0_otg_cfa10036: otg-10036@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0142 /* MX28_PAD_GPMI_READY0__USB0_ID */
+						MX28_PAD_GPMI_RDY0__USB0_ID
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 			};
@@ -83,6 +80,8 @@
 
 				ssd1306: oled@3c {
 					compatible = "solomon,ssd1306fb-i2c";
+					pinctrl-names = "default";
+					pinctrl-0 = <&ssd1306_cfa10036>;
 					reg = <0x3c>;
 					reset-gpios = <&gpio2 7 0>;
 					solomon,height = <32>;
diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts
index c2ef3a3..f93e9a7 100644
--- a/arch/arm/boot/dts/imx28-cfa10037.dts
+++ b/arch/arm/boot/dts/imx28-cfa10037.dts
@@ -13,7 +13,7 @@
  * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
  * need to include the CFA-10036 DTS.
  */
-/include/ "imx28-cfa10036.dts"
+#include "imx28-cfa10036.dts"
 
 / {
 	model = "Crystalfontz CFA-10037 Board";
@@ -22,18 +22,24 @@
 	apb@80000000 {
 		apbh@80000000 {
 			pinctrl@80018000 {
-				pinctrl-names = "default", "default";
-				pinctrl-1 = <&hog_pins_cfa10037>;
+				usb_pins_cfa10037: usb-10037@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D07__GPIO_0_7
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
 
-				hog_pins_cfa10037: hog-10037@0 {
+				mac0_pins_cfa10037: mac0-10037@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
-						0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
+						MX28_PAD_SSP2_SS2__GPIO_2_21
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 		};
@@ -56,7 +62,8 @@
 		mac0: ethernet@800f0000 {
 			phy-mode = "rmii";
 			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
+			pinctrl-0 = <&mac0_pins_a
+				&mac0_pins_cfa10037>;
 			phy-reset-gpios = <&gpio2 21 0>;
 			phy-reset-duration = <100>;
 			status = "okay";
@@ -68,6 +75,8 @@
 
 		reg_usb1_vbus: usb1_vbus {
 			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_pins_cfa10037>;
 			regulator-name = "usb1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index 04b2f76..7087b4b 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -13,7 +13,7 @@
  * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
  * need to include the CFA-10036 DTS.
  */
-/include/ "imx28-cfa10036.dts"
+#include "imx28-cfa10036.dts"
 
 / {
 	model = "Crystalfontz CFA-10049 Board";
@@ -22,119 +22,161 @@
 	apb@80000000 {
 		apbh@80000000 {
 			pinctrl@80018000 {
-				pinctrl-names = "default", "default";
-				pinctrl-1 = <&hog_pins_cfa10049
-					&hog_pins_cfa10049_pullup>;
+				usb_pins_cfa10049: usb-10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D07__GPIO_0_7
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				i2cmux_pins_cfa10049: i2cmux-10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D22__GPIO_1_22
+						MX28_PAD_LCD_D23__GPIO_1_23
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mac0_pins_cfa10049: mac0-10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SS2__GPIO_2_21
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
 
-				hog_pins_cfa10049: hog-10049@0 {
+				pca_pins_cfa10049: pca-10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
-						0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
-						0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */
-						0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
-						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+						MX28_PAD_SSP2_SS0__GPIO_2_19
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
-				hog_pins_cfa10049_pullup: hog-10049-pullup@0 {
+				rotary_pins_cfa10049: rotary-10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
-						0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */
-						0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */
-						0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
-						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+						MX28_PAD_I2C0_SCL__GPIO_3_24
+						MX28_PAD_I2C0_SDA__GPIO_3_25
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF1_SDATA0__GPIO_3_26
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				spi2_pins_cfa10049: spi2-cfa10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
-						0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
-						0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
+						MX28_PAD_SSP2_SCK__GPIO_2_16
+						MX28_PAD_SSP2_MOSI__GPIO_2_17
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_AUART1_TX__GPIO_3_5
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				spi3_pins_cfa10049: spi3-cfa10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0183 /* MX28_PAD_GPMI_RDN__GPIO_0_24 */
-						0x01c3 /* MX28_PAD_GPMI_RESETN__GPIO_0_28 */
-						0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
-						0x01a3 /* MX28_PAD_GPMI_ALE__GPIO_0_26 */
-						0x01b3 /* MX28_PAD_GPMI_CLE__GPIO_0_27 */
+						MX28_PAD_GPMI_RDN__GPIO_0_24
+						MX28_PAD_GPMI_RESETN__GPIO_0_28
+						MX28_PAD_GPMI_CE1N__GPIO_0_17
+						MX28_PAD_GPMI_ALE__GPIO_0_26
+						MX28_PAD_GPMI_CLE__GPIO_0_27
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
-						0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
-						0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_cfa10049: lcdif-evk@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RESET__GPIO_3_30
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				w1_gpio_pins: w1-gpio@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */
+						MX28_PAD_LCD_D21__GPIO_1_21
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>; /* 0 will enable the keeper */
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */
 				};
 			};
 
 			lcdif@80030000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&lcdif_18bit_pins_cfa10049
-					     &lcdif_pins_cfa10049>;
+					     &lcdif_pins_cfa10049
+					     &lcdif_pins_cfa10049_pullup>;
 				display = <&display>;
 				status = "okay";
 
@@ -181,6 +223,8 @@
 				compatible = "i2c-mux-gpio";
 				#address-cells = <1>;
 				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2cmux_pins_cfa10049>;
 				mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
 				i2c-parent = <&i2c1>;
 
@@ -203,6 +247,8 @@
 
 					pca9555: pca9555@20 {
 						compatible = "nxp,pca9555";
+						pinctrl-names = "default";
+						pinctrl-0 = <&pca_pins_cfa10049>;
 						interrupt-parent = <&gpio2>;
 						interrupts = <19 0x2>;
 						gpio-controller;
@@ -239,6 +285,8 @@
 
 		reg_usb1_vbus: usb1_vbus {
 			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_pins_cfa10049>;
 			regulator-name = "usb1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
@@ -250,7 +298,8 @@
 		mac0: ethernet@800f0000 {
 			phy-mode = "rmii";
 			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
+			pinctrl-0 = <&mac0_pins_a
+				&mac0_pins_cfa10049>;
 			phy-reset-gpios = <&gpio2 21 0>;
 			phy-reset-duration = <100>;
 			status = "okay";
@@ -320,6 +369,8 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rotary_btn_pins_cfa10049>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -333,6 +384,8 @@
 
 	rotary {
 		compatible = "rotary-encoder";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rotary_pins_cfa10049>;
 		gpios = <&gpio3 24 1>, <&gpio3 25 1>;
 		linux,axis = <1>; /* REL_Y */
 		rotary-encoder,relative-axis;
diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts
index 1581112..c3900e7 100644
--- a/arch/arm/boot/dts/imx28-cfa10055.dts
+++ b/arch/arm/boot/dts/imx28-cfa10055.dts
@@ -14,7 +14,7 @@
  * The CFA-10055 is an expansion board for the CFA-10036 module and
  * CFA-10037, thus we need to include the CFA-10037 DTS.
  */
-/include/ "imx28-cfa10037.dts"
+#include "imx28-cfa10037.dts"
 
 / {
 	model = "Crystalfontz CFA-10055 Board";
@@ -23,87 +23,75 @@
 	apb@80000000 {
 		apbh@80000000 {
 			pinctrl@80018000 {
-				pinctrl-names = "default", "default";
-				pinctrl-1 = <&hog_pins_cfa10055
-					&hog_pins_cfa10055_pullup>;
-
-				hog_pins_cfa10055: hog-10055@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
-					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
-				};
-
-				hog_pins_cfa10055_pullup: hog-10055-pullup@0 {
+				spi2_pins_cfa10055: spi2-cfa10055@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+						MX28_PAD_SSP2_SCK__GPIO_2_16
+						MX28_PAD_SSP2_MOSI__GPIO_2_17
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_AUART1_TX__GPIO_3_5
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
-				spi2_pins_cfa10055: spi2-cfa10055@0 {
+				lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
-						0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
-						0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
-				lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
+				lcdif_pins_cfa10055: lcdif-evk@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
-						0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
-						0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
-				lcdif_pins_cfa10055: lcdif-evk@0 {
+				lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RESET__GPIO_3_30
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 			};
 
 			lcdif@80030000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&lcdif_18bit_pins_cfa10055
-					     &lcdif_pins_cfa10055>;
+					     &lcdif_pins_cfa10055
+					     &lcdif_pins_cfa10055_pullup>;
 				display = <&display>;
 				status = "okay";
 
diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts
new file mode 100644
index 0000000..cef959a
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10056.dts
@@ -0,0 +1,119 @@
+/*
+ * Copyright 2013 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10055 is an expansion board for the CFA-10036 module and
+ * CFA-10037, thus we need to include the CFA-10037 DTS.
+ */
+#include "imx28-cfa10037.dts"
+
+/ {
+	model = "Crystalfontz CFA-10056 Board";
+	compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				spi2_pins_cfa10056: spi2-cfa10056@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__GPIO_2_16
+						MX28_PAD_SSP2_MOSI__GPIO_2_17
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_AUART1_TX__GPIO_3_5
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				lcdif_pins_cfa10056: lcdif-10056@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RESET__GPIO_3_30
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a
+						&lcdif_pins_cfa10056
+						&lcdif_pins_cfa10056_pullup >;
+				display = <&display>;
+				status = "okay";
+
+				display: display {
+					bits-per-pixel = <32>;
+					bus-width = <24>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <32000000>;
+							hactive = <480>;
+							vactive = <800>;
+							hback-porch = <2>;
+							hfront-porch = <2>;
+							vback-porch = <2>;
+							vfront-porch = <2>;
+							hsync-len = <5>;
+							vsync-len = <5>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	spi2 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_pins_cfa10056>;
+		status = "okay";
+		gpio-sck = <&gpio2 16 0>;
+		gpio-mosi = <&gpio2 17 0>;
+		gpio-miso = <&gpio2 18 0>;
+		cs-gpios = <&gpio3 5 0>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hx8369: hx8369@0 {
+			compatible = "himax,hx8369a", "himax,hx8369";
+			reg = <0>;
+			spi-max-frequency = <100000>;
+			spi-cpol;
+			spi-cpha;
+			gpios-reset = <&gpio3 30 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
index 2da713cd..3c13128 100644
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -14,7 +14,7 @@
  * The CFA-10057 is an expansion board for the CFA-10036 module, thus we
  * need to include the CFA-10036 DTS.
  */
-/include/ "imx28-cfa10036.dts"
+#include "imx28-cfa10036.dts"
 
 / {
 	model = "Crystalfontz CFA-10057 Board";
@@ -23,73 +23,54 @@
 	apb@80000000 {
 		apbh@80000000 {
 			pinctrl@80018000 {
-				pinctrl-names = "default", "default";
-				pinctrl-1 = <&hog_pins_cfa10057
-					&hog_pins_cfa10057_pullup>;
-
-				hog_pins_cfa10057: hog-10057@0 {
+				usb_pins_cfa10057: usb-10057@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
-						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+						MX28_PAD_GPMI_D07__GPIO_0_7
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
-				};
-
-				hog_pins_cfa10057_pullup: hog-10057-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
-						0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */
-						0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */
-						0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
-						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
-					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
-						0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
-						0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_cfa10057: lcdif-evk@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 
@@ -164,6 +145,8 @@
 
 		reg_usb1_vbus: usb1_vbus {
 			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_pins_cfa10057>;
 			regulator-name = "usb1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts
new file mode 100644
index 0000000..2469d34
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10058.dts
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2013 Crystalfontz America, Inc.
+ * Copyright 2013 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10058 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+#include "imx28-cfa10036.dts"
+
+/ {
+	model = "Crystalfontz CFA-10058 Board";
+	compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				usb_pins_cfa10058: usb-10058@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D07__GPIO_0_7
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_cfa10058: lcdif-10058@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a
+						 &lcdif_pins_cfa10058>;
+				display = <&display>;
+				status = "okay";
+
+				display: display {
+					bits-per-pixel = <32>;
+					bus-width = <24>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <30000000>;
+							hactive = <800>;
+							vactive = <480>;
+							hback-porch = <40>;
+							hfront-porch = <40>;
+							vback-porch = <13>;
+							vfront-porch = <29>;
+							hsync-len = <8>;
+							vsync-len = <8>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				fsl,lradc-touchscreen-wires = <4>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm3_pins_b>;
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_usb1_vbus: usb1_vbus {
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_pins_cfa10058>;
+			compatible = "regulator-fixed";
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio0 7 1>;
+		};
+	};
+
+	ahb@80080000 {
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-reset-gpios = <&gpio2 21 0>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index e035f46..4267c2b 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "Freescale i.MX28 Evaluation Kit";
@@ -70,52 +70,52 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */
-						0x20f3 /* MX28_PAD_SSP1_DATA3__GPIO_2_15 */
-						0x40d3 /* MX28_PAD_ENET0_RX_CLK__GPIO_4_13 */
-						0x20c3 /* MX28_PAD_SSP1_SCK__GPIO_2_12 */
-						0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
-						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
-						0x3083 /* MX28_PAD_AUART2_RX__GPIO_3_8 */
-						0x3093 /* MX28_PAD_AUART2_TX__GPIO_3_9 */
+						MX28_PAD_SSP1_CMD__GPIO_2_13
+						MX28_PAD_SSP1_DATA3__GPIO_2_15
+						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+						MX28_PAD_SSP1_SCK__GPIO_2_12
+						MX28_PAD_PWM3__GPIO_3_28
+						MX28_PAD_LCD_RESET__GPIO_3_30
+						MX28_PAD_AUART2_RX__GPIO_3_8
+						MX28_PAD_AUART2_TX__GPIO_3_9
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				led_pin_gpio3_5: led_gpio3_5@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+						MX28_PAD_AUART1_TX__GPIO_3_5
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				gpmi_pins_evk: gpmi-nand-evk@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0110 /* MX28_PAD_GPMI_CE1N__GPMI_CE1N */
-						0x0150 /* MX28_PAD_GPMI_RDY1__GPMI_READY1 */
+						MX28_PAD_GPMI_CE1N__GPMI_CE1N
+						MX28_PAD_GPMI_RDY1__GPMI_READY1
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_evk: lcdif-evk@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 
@@ -182,7 +182,12 @@
 			};
 
 			lradc@80050000 {
+				fsl,lradc-touchscreen-wires = <4>;
 				status = "okay";
+				fsl,lradc-touchscreen-wires = <4>;
+				fsl,ave-ctrl = <4>;
+				fsl,ave-delay = <2>;
+				fsl,settling = <10>;
 			};
 
 			i2c0: i2c@80058000 {
@@ -220,6 +225,7 @@
 			auart0: serial@8006a000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&auart0_pins_a>;
+				fsl,uart-has-rtscts;
 				status = "okay";
 			};
 
@@ -241,6 +247,8 @@
 
 	ahb@80080000 {
 		usb0: usb@80080000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb0_id_pins_a>;
 			vbus-supply = <&reg_usb0_vbus>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts
new file mode 100644
index 0000000..d3958da
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-m28cu3.dts
@@ -0,0 +1,266 @@
+/*
+ * Copyright (C) 2013 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "MSR M28CU3";
+	compatible = "msr,m28cu3", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			gpmi-nand@8000c000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+				status = "okay";
+
+				partition@0 {
+					label = "gpmi-nfc-0-boot";
+					reg = <0x00000000 0x01400000>;
+					read-only;
+				};
+
+				partition@1 {
+					label = "gpmi-nfc-general-use";
+					reg = <0x01400000 0x0ec00000>;
+				};
+			};
+
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a
+					     &mmc0_cd_cfg
+					     &mmc0_sck_cfg>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				status = "okay";
+			};
+
+			ssp2: ssp@80014000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc2_4bit_pins_a
+					     &mmc2_cd_cfg
+					     &mmc2_sck_cfg>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_vddio_sd1>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SS0__GPIO_2_19
+						MX28_PAD_PWM4__GPIO_3_29
+						MX28_PAD_AUART2_RX__GPIO_3_8
+						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_m28: lcdif-m28@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_VSYNC__LCD_VSYNC
+						MX28_PAD_LCD_HSYNC__LCD_HSYNC
+						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+						MX28_PAD_LCD_RESET__LCD_RESET
+						MX28_PAD_LCD_CS__LCD_ENABLE
+						MX28_PAD_AUART1_TX__GPIO_3_5
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				led_pins_gpio: leds-m28@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP3_MISO__GPIO_2_26
+						MX28_PAD_SSP3_SCK__GPIO_2_24
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			ocotp@8002c000 {
+				status = "okay";
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a
+					     &lcdif_pins_m28>;
+				display = <&display>;
+				reset-active-high;
+				status = "okay";
+
+				display: display0 {
+					bits-per-pixel = <32>;
+					bus-width = <24>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <6410256>;
+							hactive = <320>;
+							vactive = <240>;
+							hback-porch = <38>;
+							hfront-porch = <20>;
+							vback-porch = <15>;
+							vfront-porch = <5>;
+							hsync-len = <30>;
+							vsync-len = <3>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
+			};
+		};
+
+		apbx@80040000 {
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_b>;
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_2pins_a>;
+				status = "okay";
+			};
+
+			auart3: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart3_2pins_b>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm3_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usbphy1_pins_a>;
+			disable-over-current;
+			status = "okay";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-reset-gpios = <&gpio4 13 0>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+
+		mac1: ethernet@800f4000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac1_pins_a>;
+			status = "okay";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_gpio>;
+
+		user1 {
+			label = "sd0-led";
+			gpios = <&gpio2 26 0>;
+			linux,default-trigger = "mmc0";
+		};
+
+		user2 {
+			label = "sd1-led";
+			gpios = <&gpio2 24 0>;
+			linux,default-trigger = "mmc2";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_vddio_sd0: vddio-sd0 {
+			compatible = "regulator-fixed";
+			regulator-name = "vddio-sd0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 29 0>;
+		};
+
+		reg_vddio_sd1: vddio-sd1 {
+			compatible = "regulator-fixed";
+			regulator-name = "vddio-sd1";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 19 0>;
+		};
+
+		reg_usb1_vbus: usb1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 8 0>;
+			enable-active-high;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 44d9da5..8e2477f 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "DENX M28EVK";
@@ -92,26 +92,26 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
-						0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */
-						0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */
-						0x30c3 /* MX28_PAD_AUART3_RX__GPIO_3_12 */
-						0x30d3 /* MX28_PAD_AUART3_TX__GPIO_3_13 */
+						MX28_PAD_PWM3__GPIO_3_28
+						MX28_PAD_AUART2_CTS__GPIO_3_10
+						MX28_PAD_AUART2_RTS__GPIO_3_11
+						MX28_PAD_AUART3_RX__GPIO_3_12
+						MX28_PAD_AUART3_TX__GPIO_3_13
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_pins_m28: lcdif-m28@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x11e0 /* MX28_PAD_LCD_DOTCLK__LCD_DOTCLK */
-						0x11f0 /* MX28_PAD_LCD_ENABLE__LCD_ENABLE */
+						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+						MX28_PAD_LCD_ENABLE__LCD_ENABLE
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 
@@ -235,6 +235,12 @@
 				pinctrl-0 = <&auart2_2pins_b>;
 				status = "okay";
 			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm4_pins_a>;
+				status = "okay";
+			};
 		};
 	};
 
@@ -270,6 +276,13 @@
 		};
 	};
 
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 4 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
 	regulators {
 		compatible = "simple-bus";
 
diff --git a/arch/arm/boot/dts/imx28-pinfunc.h b/arch/arm/boot/dts/imx28-pinfunc.h
new file mode 100644
index 0000000..e11f69b
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-pinfunc.h
@@ -0,0 +1,506 @@
+/*
+ * Header providing constants for i.MX28 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MX28_PINCTRL_H__
+#define __DT_BINDINGS_MX28_PINCTRL_H__
+
+#include "mxs-pinfunc.h"
+
+#define MX28_PAD_GPMI_D00__GPMI_D0			0x0000
+#define MX28_PAD_GPMI_D01__GPMI_D1			0x0010
+#define MX28_PAD_GPMI_D02__GPMI_D2			0x0020
+#define MX28_PAD_GPMI_D03__GPMI_D3			0x0030
+#define MX28_PAD_GPMI_D04__GPMI_D4			0x0040
+#define MX28_PAD_GPMI_D05__GPMI_D5			0x0050
+#define MX28_PAD_GPMI_D06__GPMI_D6			0x0060
+#define MX28_PAD_GPMI_D07__GPMI_D7			0x0070
+#define MX28_PAD_GPMI_CE0N__GPMI_CE0N			0x0100
+#define MX28_PAD_GPMI_CE1N__GPMI_CE1N			0x0110
+#define MX28_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
+#define MX28_PAD_GPMI_CE3N__GPMI_CE3N			0x0130
+#define MX28_PAD_GPMI_RDY0__GPMI_READY0			0x0140
+#define MX28_PAD_GPMI_RDY1__GPMI_READY1			0x0150
+#define MX28_PAD_GPMI_RDY2__GPMI_READY2			0x0160
+#define MX28_PAD_GPMI_RDY3__GPMI_READY3			0x0170
+#define MX28_PAD_GPMI_RDN__GPMI_RDN			0x0180
+#define MX28_PAD_GPMI_WRN__GPMI_WRN			0x0190
+#define MX28_PAD_GPMI_ALE__GPMI_ALE			0x01a0
+#define MX28_PAD_GPMI_CLE__GPMI_CLE			0x01b0
+#define MX28_PAD_GPMI_RESETN__GPMI_RESETN		0x01c0
+#define MX28_PAD_LCD_D00__LCD_D0			0x1000
+#define MX28_PAD_LCD_D01__LCD_D1			0x1010
+#define MX28_PAD_LCD_D02__LCD_D2			0x1020
+#define MX28_PAD_LCD_D03__LCD_D3			0x1030
+#define MX28_PAD_LCD_D04__LCD_D4			0x1040
+#define MX28_PAD_LCD_D05__LCD_D5			0x1050
+#define MX28_PAD_LCD_D06__LCD_D6			0x1060
+#define MX28_PAD_LCD_D07__LCD_D7			0x1070
+#define MX28_PAD_LCD_D08__LCD_D8			0x1080
+#define MX28_PAD_LCD_D09__LCD_D9			0x1090
+#define MX28_PAD_LCD_D10__LCD_D10			0x10a0
+#define MX28_PAD_LCD_D11__LCD_D11			0x10b0
+#define MX28_PAD_LCD_D12__LCD_D12			0x10c0
+#define MX28_PAD_LCD_D13__LCD_D13			0x10d0
+#define MX28_PAD_LCD_D14__LCD_D14			0x10e0
+#define MX28_PAD_LCD_D15__LCD_D15			0x10f0
+#define MX28_PAD_LCD_D16__LCD_D16			0x1100
+#define MX28_PAD_LCD_D17__LCD_D17			0x1110
+#define MX28_PAD_LCD_D18__LCD_D18			0x1120
+#define MX28_PAD_LCD_D19__LCD_D19			0x1130
+#define MX28_PAD_LCD_D20__LCD_D20			0x1140
+#define MX28_PAD_LCD_D21__LCD_D21			0x1150
+#define MX28_PAD_LCD_D22__LCD_D22			0x1160
+#define MX28_PAD_LCD_D23__LCD_D23			0x1170
+#define MX28_PAD_LCD_RD_E__LCD_RD_E			0x1180
+#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN			0x1190
+#define MX28_PAD_LCD_RS__LCD_RS				0x11a0
+#define MX28_PAD_LCD_CS__LCD_CS				0x11b0
+#define MX28_PAD_LCD_VSYNC__LCD_VSYNC			0x11c0
+#define MX28_PAD_LCD_HSYNC__LCD_HSYNC			0x11d0
+#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK			0x11e0
+#define MX28_PAD_LCD_ENABLE__LCD_ENABLE			0x11f0
+#define MX28_PAD_SSP0_DATA0__SSP0_D0			0x2000
+#define MX28_PAD_SSP0_DATA1__SSP0_D1			0x2010
+#define MX28_PAD_SSP0_DATA2__SSP0_D2			0x2020
+#define MX28_PAD_SSP0_DATA3__SSP0_D3			0x2030
+#define MX28_PAD_SSP0_DATA4__SSP0_D4			0x2040
+#define MX28_PAD_SSP0_DATA5__SSP0_D5			0x2050
+#define MX28_PAD_SSP0_DATA6__SSP0_D6			0x2060
+#define MX28_PAD_SSP0_DATA7__SSP0_D7			0x2070
+#define MX28_PAD_SSP0_CMD__SSP0_CMD			0x2080
+#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT		0x2090
+#define MX28_PAD_SSP0_SCK__SSP0_SCK			0x20a0
+#define MX28_PAD_SSP1_SCK__SSP1_SCK			0x20c0
+#define MX28_PAD_SSP1_CMD__SSP1_CMD			0x20d0
+#define MX28_PAD_SSP1_DATA0__SSP1_D0			0x20e0
+#define MX28_PAD_SSP1_DATA3__SSP1_D3			0x20f0
+#define MX28_PAD_SSP2_SCK__SSP2_SCK			0x2100
+#define MX28_PAD_SSP2_MOSI__SSP2_CMD			0x2110
+#define MX28_PAD_SSP2_MISO__SSP2_D0			0x2120
+#define MX28_PAD_SSP2_SS0__SSP2_D3			0x2130
+#define MX28_PAD_SSP2_SS1__SSP2_D4			0x2140
+#define MX28_PAD_SSP2_SS2__SSP2_D5			0x2150
+#define MX28_PAD_SSP3_SCK__SSP3_SCK			0x2180
+#define MX28_PAD_SSP3_MOSI__SSP3_CMD			0x2190
+#define MX28_PAD_SSP3_MISO__SSP3_D0			0x21a0
+#define MX28_PAD_SSP3_SS0__SSP3_D3			0x21b0
+#define MX28_PAD_AUART0_RX__AUART0_RX			0x3000
+#define MX28_PAD_AUART0_TX__AUART0_TX			0x3010
+#define MX28_PAD_AUART0_CTS__AUART0_CTS			0x3020
+#define MX28_PAD_AUART0_RTS__AUART0_RTS			0x3030
+#define MX28_PAD_AUART1_RX__AUART1_RX			0x3040
+#define MX28_PAD_AUART1_TX__AUART1_TX			0x3050
+#define MX28_PAD_AUART1_CTS__AUART1_CTS			0x3060
+#define MX28_PAD_AUART1_RTS__AUART1_RTS			0x3070
+#define MX28_PAD_AUART2_RX__AUART2_RX			0x3080
+#define MX28_PAD_AUART2_TX__AUART2_TX			0x3090
+#define MX28_PAD_AUART2_CTS__AUART2_CTS			0x30a0
+#define MX28_PAD_AUART2_RTS__AUART2_RTS			0x30b0
+#define MX28_PAD_AUART3_RX__AUART3_RX			0x30c0
+#define MX28_PAD_AUART3_TX__AUART3_TX			0x30d0
+#define MX28_PAD_AUART3_CTS__AUART3_CTS			0x30e0
+#define MX28_PAD_AUART3_RTS__AUART3_RTS			0x30f0
+#define MX28_PAD_PWM0__PWM_0				0x3100
+#define MX28_PAD_PWM1__PWM_1				0x3110
+#define MX28_PAD_PWM2__PWM_2				0x3120
+#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK			0x3140
+#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK		0x3150
+#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK		0x3160
+#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0		0x3170
+#define MX28_PAD_I2C0_SCL__I2C0_SCL			0x3180
+#define MX28_PAD_I2C0_SDA__I2C0_SDA			0x3190
+#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0		0x31a0
+#define MX28_PAD_SPDIF__SPDIF_TX			0x31b0
+#define MX28_PAD_PWM3__PWM_3				0x31c0
+#define MX28_PAD_PWM4__PWM_4				0x31d0
+#define MX28_PAD_LCD_RESET__LCD_RESET			0x31e0
+#define MX28_PAD_ENET0_MDC__ENET0_MDC			0x4000
+#define MX28_PAD_ENET0_MDIO__ENET0_MDIO			0x4010
+#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN		0x4020
+#define MX28_PAD_ENET0_RXD0__ENET0_RXD0			0x4030
+#define MX28_PAD_ENET0_RXD1__ENET0_RXD1			0x4040
+#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK		0x4050
+#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN		0x4060
+#define MX28_PAD_ENET0_TXD0__ENET0_TXD0			0x4070
+#define MX28_PAD_ENET0_TXD1__ENET0_TXD1			0x4080
+#define MX28_PAD_ENET0_RXD2__ENET0_RXD2			0x4090
+#define MX28_PAD_ENET0_RXD3__ENET0_RXD3			0x40a0
+#define MX28_PAD_ENET0_TXD2__ENET0_TXD2			0x40b0
+#define MX28_PAD_ENET0_TXD3__ENET0_TXD3			0x40c0
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK		0x40d0
+#define MX28_PAD_ENET0_COL__ENET0_COL			0x40e0
+#define MX28_PAD_ENET0_CRS__ENET0_CRS			0x40f0
+#define MX28_PAD_ENET_CLK__CLKCTRL_ENET			0x4100
+#define MX28_PAD_JTAG_RTCK__JTAG_RTCK			0x4140
+#define MX28_PAD_EMI_D00__EMI_DATA0			0x5000
+#define MX28_PAD_EMI_D01__EMI_DATA1			0x5010
+#define MX28_PAD_EMI_D02__EMI_DATA2			0x5020
+#define MX28_PAD_EMI_D03__EMI_DATA3			0x5030
+#define MX28_PAD_EMI_D04__EMI_DATA4			0x5040
+#define MX28_PAD_EMI_D05__EMI_DATA5			0x5050
+#define MX28_PAD_EMI_D06__EMI_DATA6			0x5060
+#define MX28_PAD_EMI_D07__EMI_DATA7			0x5070
+#define MX28_PAD_EMI_D08__EMI_DATA8			0x5080
+#define MX28_PAD_EMI_D09__EMI_DATA9			0x5090
+#define MX28_PAD_EMI_D10__EMI_DATA10			0x50a0
+#define MX28_PAD_EMI_D11__EMI_DATA11			0x50b0
+#define MX28_PAD_EMI_D12__EMI_DATA12			0x50c0
+#define MX28_PAD_EMI_D13__EMI_DATA13			0x50d0
+#define MX28_PAD_EMI_D14__EMI_DATA14			0x50e0
+#define MX28_PAD_EMI_D15__EMI_DATA15			0x50f0
+#define MX28_PAD_EMI_ODT0__EMI_ODT0			0x5100
+#define MX28_PAD_EMI_DQM0__EMI_DQM0			0x5110
+#define MX28_PAD_EMI_ODT1__EMI_ODT1			0x5120
+#define MX28_PAD_EMI_DQM1__EMI_DQM1			0x5130
+#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK	0x5140
+#define MX28_PAD_EMI_CLK__EMI_CLK			0x5150
+#define MX28_PAD_EMI_DQS0__EMI_DQS0			0x5160
+#define MX28_PAD_EMI_DQS1__EMI_DQS1			0x5170
+#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN		0x51a0
+#define MX28_PAD_EMI_A00__EMI_ADDR0			0x6000
+#define MX28_PAD_EMI_A01__EMI_ADDR1			0x6010
+#define MX28_PAD_EMI_A02__EMI_ADDR2			0x6020
+#define MX28_PAD_EMI_A03__EMI_ADDR3			0x6030
+#define MX28_PAD_EMI_A04__EMI_ADDR4			0x6040
+#define MX28_PAD_EMI_A05__EMI_ADDR5			0x6050
+#define MX28_PAD_EMI_A06__EMI_ADDR6			0x6060
+#define MX28_PAD_EMI_A07__EMI_ADDR7			0x6070
+#define MX28_PAD_EMI_A08__EMI_ADDR8			0x6080
+#define MX28_PAD_EMI_A09__EMI_ADDR9			0x6090
+#define MX28_PAD_EMI_A10__EMI_ADDR10			0x60a0
+#define MX28_PAD_EMI_A11__EMI_ADDR11			0x60b0
+#define MX28_PAD_EMI_A12__EMI_ADDR12			0x60c0
+#define MX28_PAD_EMI_A13__EMI_ADDR13			0x60d0
+#define MX28_PAD_EMI_A14__EMI_ADDR14			0x60e0
+#define MX28_PAD_EMI_BA0__EMI_BA0			0x6100
+#define MX28_PAD_EMI_BA1__EMI_BA1			0x6110
+#define MX28_PAD_EMI_BA2__EMI_BA2			0x6120
+#define MX28_PAD_EMI_CASN__EMI_CASN			0x6130
+#define MX28_PAD_EMI_RASN__EMI_RASN			0x6140
+#define MX28_PAD_EMI_WEN__EMI_WEN			0x6150
+#define MX28_PAD_EMI_CE0N__EMI_CE0N			0x6160
+#define MX28_PAD_EMI_CE1N__EMI_CE1N			0x6170
+#define MX28_PAD_EMI_CKE__EMI_CKE			0x6180
+#define MX28_PAD_GPMI_D00__SSP1_D0			0x0001
+#define MX28_PAD_GPMI_D01__SSP1_D1			0x0011
+#define MX28_PAD_GPMI_D02__SSP1_D2			0x0021
+#define MX28_PAD_GPMI_D03__SSP1_D3			0x0031
+#define MX28_PAD_GPMI_D04__SSP1_D4			0x0041
+#define MX28_PAD_GPMI_D05__SSP1_D5			0x0051
+#define MX28_PAD_GPMI_D06__SSP1_D6			0x0061
+#define MX28_PAD_GPMI_D07__SSP1_D7			0x0071
+#define MX28_PAD_GPMI_CE0N__SSP3_D0			0x0101
+#define MX28_PAD_GPMI_CE1N__SSP3_D3			0x0111
+#define MX28_PAD_GPMI_CE2N__CAN1_TX			0x0121
+#define MX28_PAD_GPMI_CE3N__CAN1_RX			0x0131
+#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT		0x0141
+#define MX28_PAD_GPMI_RDY1__SSP1_CMD			0x0151
+#define MX28_PAD_GPMI_RDY2__CAN0_TX			0x0161
+#define MX28_PAD_GPMI_RDY3__CAN0_RX			0x0171
+#define MX28_PAD_GPMI_RDN__SSP3_SCK			0x0181
+#define MX28_PAD_GPMI_WRN__SSP1_SCK			0x0191
+#define MX28_PAD_GPMI_ALE__SSP3_D1			0x01a1
+#define MX28_PAD_GPMI_CLE__SSP3_D2			0x01b1
+#define MX28_PAD_GPMI_RESETN__SSP3_CMD			0x01c1
+#define MX28_PAD_LCD_D03__ETM_DA8			0x1031
+#define MX28_PAD_LCD_D04__ETM_DA9			0x1041
+#define MX28_PAD_LCD_D08__ETM_DA3			0x1081
+#define MX28_PAD_LCD_D09__ETM_DA4			0x1091
+#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT		0x1141
+#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN		0x1151
+#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT		0x1161
+#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN		0x1171
+#define MX28_PAD_LCD_RD_E__LCD_VSYNC			0x1181
+#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC			0x1191
+#define MX28_PAD_LCD_RS__LCD_DOTCLK			0x11a1
+#define MX28_PAD_LCD_CS__LCD_ENABLE			0x11b1
+#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0		0x11c1
+#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1		0x11d1
+#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK			0x11e1
+#define MX28_PAD_SSP0_DATA4__SSP2_D0			0x2041
+#define MX28_PAD_SSP0_DATA5__SSP2_D3			0x2051
+#define MX28_PAD_SSP0_DATA6__SSP2_CMD			0x2061
+#define MX28_PAD_SSP0_DATA7__SSP2_SCK			0x2071
+#define MX28_PAD_SSP1_SCK__SSP2_D1			0x20c1
+#define MX28_PAD_SSP1_CMD__SSP2_D2			0x20d1
+#define MX28_PAD_SSP1_DATA0__SSP2_D6			0x20e1
+#define MX28_PAD_SSP1_DATA3__SSP2_D7			0x20f1
+#define MX28_PAD_SSP2_SCK__AUART2_RX			0x2101
+#define MX28_PAD_SSP2_MOSI__AUART2_TX			0x2111
+#define MX28_PAD_SSP2_MISO__AUART3_RX			0x2121
+#define MX28_PAD_SSP2_SS0__AUART3_TX			0x2131
+#define MX28_PAD_SSP2_SS1__SSP2_D1			0x2141
+#define MX28_PAD_SSP2_SS2__SSP2_D2			0x2151
+#define MX28_PAD_SSP3_SCK__AUART4_TX			0x2181
+#define MX28_PAD_SSP3_MOSI__AUART4_RX			0x2191
+#define MX28_PAD_SSP3_MISO__AUART4_RTS			0x21a1
+#define MX28_PAD_SSP3_SS0__AUART4_CTS			0x21b1
+#define MX28_PAD_AUART0_RX__I2C0_SCL			0x3001
+#define MX28_PAD_AUART0_TX__I2C0_SDA			0x3011
+#define MX28_PAD_AUART0_CTS__AUART4_RX			0x3021
+#define MX28_PAD_AUART0_RTS__AUART4_TX			0x3031
+#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT		0x3041
+#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT		0x3051
+#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT		0x3061
+#define MX28_PAD_AUART1_RTS__USB0_ID			0x3071
+#define MX28_PAD_AUART2_RX__SSP3_D1			0x3081
+#define MX28_PAD_AUART2_TX__SSP3_D2			0x3091
+#define MX28_PAD_AUART2_CTS__I2C1_SCL			0x30a1
+#define MX28_PAD_AUART2_RTS__I2C1_SDA			0x30b1
+#define MX28_PAD_AUART3_RX__CAN0_TX			0x30c1
+#define MX28_PAD_AUART3_TX__CAN0_RX			0x30d1
+#define MX28_PAD_AUART3_CTS__CAN1_TX			0x30e1
+#define MX28_PAD_AUART3_RTS__CAN1_RX			0x30f1
+#define MX28_PAD_PWM0__I2C1_SCL				0x3101
+#define MX28_PAD_PWM1__I2C1_SDA				0x3111
+#define MX28_PAD_PWM2__USB0_ID				0x3121
+#define MX28_PAD_SAIF0_MCLK__PWM_3			0x3141
+#define MX28_PAD_SAIF0_LRCLK__PWM_4			0x3151
+#define MX28_PAD_SAIF0_BITCLK__PWM_5			0x3161
+#define MX28_PAD_SAIF0_SDATA0__PWM_6			0x3171
+#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA		0x3181
+#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB		0x3191
+#define MX28_PAD_SAIF1_SDATA0__PWM_7			0x31a1
+#define MX28_PAD_LCD_RESET__LCD_VSYNC			0x31e1
+#define MX28_PAD_ENET0_MDC__GPMI_CE4N			0x4001
+#define MX28_PAD_ENET0_MDIO__GPMI_CE5N			0x4011
+#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N			0x4021
+#define MX28_PAD_ENET0_RXD0__GPMI_CE7N			0x4031
+#define MX28_PAD_ENET0_RXD1__GPMI_READY4		0x4041
+#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER		0x4051
+#define MX28_PAD_ENET0_TX_EN__GPMI_READY5		0x4061
+#define MX28_PAD_ENET0_TXD0__GPMI_READY6		0x4071
+#define MX28_PAD_ENET0_TXD1__GPMI_READY7		0x4081
+#define MX28_PAD_ENET0_RXD2__ENET1_RXD0			0x4091
+#define MX28_PAD_ENET0_RXD3__ENET1_RXD1			0x40a1
+#define MX28_PAD_ENET0_TXD2__ENET1_TXD0			0x40b1
+#define MX28_PAD_ENET0_TXD3__ENET1_TXD1			0x40c1
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER		0x40d1
+#define MX28_PAD_ENET0_COL__ENET1_TX_EN			0x40e1
+#define MX28_PAD_ENET0_CRS__ENET1_RX_EN			0x40f1
+#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER			0x0122
+#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK			0x0132
+#define MX28_PAD_GPMI_RDY0__USB0_ID			0x0142
+#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER			0x0162
+#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER		0x0172
+#define MX28_PAD_GPMI_ALE__SSP3_D4			0x01a2
+#define MX28_PAD_GPMI_CLE__SSP3_D5			0x01b2
+#define MX28_PAD_LCD_D00__ETM_DA0			0x1002
+#define MX28_PAD_LCD_D01__ETM_DA1			0x1012
+#define MX28_PAD_LCD_D02__ETM_DA2			0x1022
+#define MX28_PAD_LCD_D03__ETM_DA3			0x1032
+#define MX28_PAD_LCD_D04__ETM_DA4			0x1042
+#define MX28_PAD_LCD_D05__ETM_DA5			0x1052
+#define MX28_PAD_LCD_D06__ETM_DA6			0x1062
+#define MX28_PAD_LCD_D07__ETM_DA7			0x1072
+#define MX28_PAD_LCD_D08__ETM_DA8			0x1082
+#define MX28_PAD_LCD_D09__ETM_DA9			0x1092
+#define MX28_PAD_LCD_D10__ETM_DA10			0x10a2
+#define MX28_PAD_LCD_D11__ETM_DA11			0x10b2
+#define MX28_PAD_LCD_D12__ETM_DA12			0x10c2
+#define MX28_PAD_LCD_D13__ETM_DA13			0x10d2
+#define MX28_PAD_LCD_D14__ETM_DA14			0x10e2
+#define MX28_PAD_LCD_D15__ETM_DA15			0x10f2
+#define MX28_PAD_LCD_D16__ETM_DA7			0x1102
+#define MX28_PAD_LCD_D17__ETM_DA6			0x1112
+#define MX28_PAD_LCD_D18__ETM_DA5			0x1122
+#define MX28_PAD_LCD_D19__ETM_DA4			0x1132
+#define MX28_PAD_LCD_D20__ETM_DA3			0x1142
+#define MX28_PAD_LCD_D21__ETM_DA2			0x1152
+#define MX28_PAD_LCD_D22__ETM_DA1			0x1162
+#define MX28_PAD_LCD_D23__ETM_DA0			0x1172
+#define MX28_PAD_LCD_RD_E__ETM_TCTL			0x1182
+#define MX28_PAD_LCD_WR_RWN__ETM_TCLK			0x1192
+#define MX28_PAD_LCD_HSYNC__ETM_TCTL			0x11d2
+#define MX28_PAD_LCD_DOTCLK__ETM_TCLK			0x11e2
+#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT	0x20c2
+#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN		0x20d2
+#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT	0x20e2
+#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN	0x20f2
+#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1			0x2102
+#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2		0x2112
+#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1		0x2122
+#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2			0x2132
+#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT		0x2142
+#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT		0x2152
+#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT	0x2182
+#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN	0x2192
+#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT	0x21a2
+#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN		0x21b2
+#define MX28_PAD_AUART0_RX__DUART_CTS			0x3002
+#define MX28_PAD_AUART0_TX__DUART_RTS			0x3012
+#define MX28_PAD_AUART0_CTS__DUART_RX			0x3022
+#define MX28_PAD_AUART0_RTS__DUART_TX			0x3032
+#define MX28_PAD_AUART1_RX__PWM_0			0x3042
+#define MX28_PAD_AUART1_TX__PWM_1			0x3052
+#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA		0x3062
+#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB		0x3072
+#define MX28_PAD_AUART2_RX__SSP3_D4			0x3082
+#define MX28_PAD_AUART2_TX__SSP3_D5			0x3092
+#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK		0x30a2
+#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK		0x30b2
+#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT	0x30c2
+#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN	0x30d2
+#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT	0x30e2
+#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN	0x30f2
+#define MX28_PAD_PWM0__DUART_RX				0x3102
+#define MX28_PAD_PWM1__DUART_TX				0x3112
+#define MX28_PAD_PWM2__USB1_OVERCURRENT			0x3122
+#define MX28_PAD_SAIF0_MCLK__AUART4_CTS			0x3142
+#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS		0x3152
+#define MX28_PAD_SAIF0_BITCLK__AUART4_RX		0x3162
+#define MX28_PAD_SAIF0_SDATA0__AUART4_TX		0x3172
+#define MX28_PAD_I2C0_SCL__DUART_RX			0x3182
+#define MX28_PAD_I2C0_SDA__DUART_TX			0x3192
+#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1		0x31a2
+#define MX28_PAD_SPDIF__ENET1_RX_ER			0x31b2
+#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1		0x4002
+#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2		0x4012
+#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1		0x4022
+#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2		0x4032
+#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT	0x4052
+#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT	0x4092
+#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN	0x40a2
+#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT	0x40b2
+#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN	0x40c2
+#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN	0x40d2
+#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT	0x40e2
+#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN	0x40f2
+#define MX28_PAD_GPMI_D00__GPIO_0_0			0x0003
+#define MX28_PAD_GPMI_D01__GPIO_0_1			0x0013
+#define MX28_PAD_GPMI_D02__GPIO_0_2			0x0023
+#define MX28_PAD_GPMI_D03__GPIO_0_3			0x0033
+#define MX28_PAD_GPMI_D04__GPIO_0_4			0x0043
+#define MX28_PAD_GPMI_D05__GPIO_0_5			0x0053
+#define MX28_PAD_GPMI_D06__GPIO_0_6			0x0063
+#define MX28_PAD_GPMI_D07__GPIO_0_7			0x0073
+#define MX28_PAD_GPMI_CE0N__GPIO_0_16			0x0103
+#define MX28_PAD_GPMI_CE1N__GPIO_0_17			0x0113
+#define MX28_PAD_GPMI_CE2N__GPIO_0_18			0x0123
+#define MX28_PAD_GPMI_CE3N__GPIO_0_19			0x0133
+#define MX28_PAD_GPMI_RDY0__GPIO_0_20			0x0143
+#define MX28_PAD_GPMI_RDY1__GPIO_0_21			0x0153
+#define MX28_PAD_GPMI_RDY2__GPIO_0_22			0x0163
+#define MX28_PAD_GPMI_RDY3__GPIO_0_23			0x0173
+#define MX28_PAD_GPMI_RDN__GPIO_0_24			0x0183
+#define MX28_PAD_GPMI_WRN__GPIO_0_25			0x0193
+#define MX28_PAD_GPMI_ALE__GPIO_0_26			0x01a3
+#define MX28_PAD_GPMI_CLE__GPIO_0_27			0x01b3
+#define MX28_PAD_GPMI_RESETN__GPIO_0_28			0x01c3
+#define MX28_PAD_LCD_D00__GPIO_1_0			0x1003
+#define MX28_PAD_LCD_D01__GPIO_1_1			0x1013
+#define MX28_PAD_LCD_D02__GPIO_1_2			0x1023
+#define MX28_PAD_LCD_D03__GPIO_1_3			0x1033
+#define MX28_PAD_LCD_D04__GPIO_1_4			0x1043
+#define MX28_PAD_LCD_D05__GPIO_1_5			0x1053
+#define MX28_PAD_LCD_D06__GPIO_1_6			0x1063
+#define MX28_PAD_LCD_D07__GPIO_1_7			0x1073
+#define MX28_PAD_LCD_D08__GPIO_1_8			0x1083
+#define MX28_PAD_LCD_D09__GPIO_1_9			0x1093
+#define MX28_PAD_LCD_D10__GPIO_1_10			0x10a3
+#define MX28_PAD_LCD_D11__GPIO_1_11			0x10b3
+#define MX28_PAD_LCD_D12__GPIO_1_12			0x10c3
+#define MX28_PAD_LCD_D13__GPIO_1_13			0x10d3
+#define MX28_PAD_LCD_D14__GPIO_1_14			0x10e3
+#define MX28_PAD_LCD_D15__GPIO_1_15			0x10f3
+#define MX28_PAD_LCD_D16__GPIO_1_16			0x1103
+#define MX28_PAD_LCD_D17__GPIO_1_17			0x1113
+#define MX28_PAD_LCD_D18__GPIO_1_18			0x1123
+#define MX28_PAD_LCD_D19__GPIO_1_19			0x1133
+#define MX28_PAD_LCD_D20__GPIO_1_20			0x1143
+#define MX28_PAD_LCD_D21__GPIO_1_21			0x1153
+#define MX28_PAD_LCD_D22__GPIO_1_22			0x1163
+#define MX28_PAD_LCD_D23__GPIO_1_23			0x1173
+#define MX28_PAD_LCD_RD_E__GPIO_1_24			0x1183
+#define MX28_PAD_LCD_WR_RWN__GPIO_1_25			0x1193
+#define MX28_PAD_LCD_RS__GPIO_1_26			0x11a3
+#define MX28_PAD_LCD_CS__GPIO_1_27			0x11b3
+#define MX28_PAD_LCD_VSYNC__GPIO_1_28			0x11c3
+#define MX28_PAD_LCD_HSYNC__GPIO_1_29			0x11d3
+#define MX28_PAD_LCD_DOTCLK__GPIO_1_30			0x11e3
+#define MX28_PAD_LCD_ENABLE__GPIO_1_31			0x11f3
+#define MX28_PAD_SSP0_DATA0__GPIO_2_0			0x2003
+#define MX28_PAD_SSP0_DATA1__GPIO_2_1			0x2013
+#define MX28_PAD_SSP0_DATA2__GPIO_2_2			0x2023
+#define MX28_PAD_SSP0_DATA3__GPIO_2_3			0x2033
+#define MX28_PAD_SSP0_DATA4__GPIO_2_4			0x2043
+#define MX28_PAD_SSP0_DATA5__GPIO_2_5			0x2053
+#define MX28_PAD_SSP0_DATA6__GPIO_2_6			0x2063
+#define MX28_PAD_SSP0_DATA7__GPIO_2_7			0x2073
+#define MX28_PAD_SSP0_CMD__GPIO_2_8			0x2083
+#define MX28_PAD_SSP0_DETECT__GPIO_2_9			0x2093
+#define MX28_PAD_SSP0_SCK__GPIO_2_10			0x20a3
+#define MX28_PAD_SSP1_SCK__GPIO_2_12			0x20c3
+#define MX28_PAD_SSP1_CMD__GPIO_2_13			0x20d3
+#define MX28_PAD_SSP1_DATA0__GPIO_2_14			0x20e3
+#define MX28_PAD_SSP1_DATA3__GPIO_2_15			0x20f3
+#define MX28_PAD_SSP2_SCK__GPIO_2_16			0x2103
+#define MX28_PAD_SSP2_MOSI__GPIO_2_17			0x2113
+#define MX28_PAD_SSP2_MISO__GPIO_2_18			0x2123
+#define MX28_PAD_SSP2_SS0__GPIO_2_19			0x2133
+#define MX28_PAD_SSP2_SS1__GPIO_2_20			0x2143
+#define MX28_PAD_SSP2_SS2__GPIO_2_21			0x2153
+#define MX28_PAD_SSP3_SCK__GPIO_2_24			0x2183
+#define MX28_PAD_SSP3_MOSI__GPIO_2_25			0x2193
+#define MX28_PAD_SSP3_MISO__GPIO_2_26			0x21a3
+#define MX28_PAD_SSP3_SS0__GPIO_2_27			0x21b3
+#define MX28_PAD_AUART0_RX__GPIO_3_0			0x3003
+#define MX28_PAD_AUART0_TX__GPIO_3_1			0x3013
+#define MX28_PAD_AUART0_CTS__GPIO_3_2			0x3023
+#define MX28_PAD_AUART0_RTS__GPIO_3_3			0x3033
+#define MX28_PAD_AUART1_RX__GPIO_3_4			0x3043
+#define MX28_PAD_AUART1_TX__GPIO_3_5			0x3053
+#define MX28_PAD_AUART1_CTS__GPIO_3_6			0x3063
+#define MX28_PAD_AUART1_RTS__GPIO_3_7			0x3073
+#define MX28_PAD_AUART2_RX__GPIO_3_8			0x3083
+#define MX28_PAD_AUART2_TX__GPIO_3_9			0x3093
+#define MX28_PAD_AUART2_CTS__GPIO_3_10			0x30a3
+#define MX28_PAD_AUART2_RTS__GPIO_3_11			0x30b3
+#define MX28_PAD_AUART3_RX__GPIO_3_12			0x30c3
+#define MX28_PAD_AUART3_TX__GPIO_3_13			0x30d3
+#define MX28_PAD_AUART3_CTS__GPIO_3_14			0x30e3
+#define MX28_PAD_AUART3_RTS__GPIO_3_15			0x30f3
+#define MX28_PAD_PWM0__GPIO_3_16			0x3103
+#define MX28_PAD_PWM1__GPIO_3_17			0x3113
+#define MX28_PAD_PWM2__GPIO_3_18			0x3123
+#define MX28_PAD_SAIF0_MCLK__GPIO_3_20			0x3143
+#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21			0x3153
+#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22		0x3163
+#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23		0x3173
+#define MX28_PAD_I2C0_SCL__GPIO_3_24			0x3183
+#define MX28_PAD_I2C0_SDA__GPIO_3_25			0x3193
+#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26		0x31a3
+#define MX28_PAD_SPDIF__GPIO_3_27			0x31b3
+#define MX28_PAD_PWM3__GPIO_3_28			0x31c3
+#define MX28_PAD_PWM4__GPIO_3_29			0x31d3
+#define MX28_PAD_LCD_RESET__GPIO_3_30			0x31e3
+#define MX28_PAD_ENET0_MDC__GPIO_4_0			0x4003
+#define MX28_PAD_ENET0_MDIO__GPIO_4_1			0x4013
+#define MX28_PAD_ENET0_RX_EN__GPIO_4_2			0x4023
+#define MX28_PAD_ENET0_RXD0__GPIO_4_3			0x4033
+#define MX28_PAD_ENET0_RXD1__GPIO_4_4			0x4043
+#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5			0x4053
+#define MX28_PAD_ENET0_TX_EN__GPIO_4_6			0x4063
+#define MX28_PAD_ENET0_TXD0__GPIO_4_7			0x4073
+#define MX28_PAD_ENET0_TXD1__GPIO_4_8			0x4083
+#define MX28_PAD_ENET0_RXD2__GPIO_4_9			0x4093
+#define MX28_PAD_ENET0_RXD3__GPIO_4_10			0x40a3
+#define MX28_PAD_ENET0_TXD2__GPIO_4_11			0x40b3
+#define MX28_PAD_ENET0_TXD3__GPIO_4_12			0x40c3
+#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13		0x40d3
+#define MX28_PAD_ENET0_COL__GPIO_4_14			0x40e3
+#define MX28_PAD_ENET0_CRS__GPIO_4_15			0x40f3
+#define MX28_PAD_ENET_CLK__GPIO_4_16			0x4103
+#define MX28_PAD_JTAG_RTCK__GPIO_4_20			0x4143
+
+#endif /* __DT_BINDINGS_MX28_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
index 6c6a544..4870f07 100644
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ b/arch/arm/boot/dts/imx28-sps1.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
 
 / {
 	model = "SchulerControl GmbH, SC SPS 1";
@@ -29,13 +29,13 @@
 				hog_pins_a: hog-gpios@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0003 /* MX28_PAD_GPMI_D00__GPIO_0_0 */
-						0x0033 /* MX28_PAD_GPMI_D03__GPIO_0_3 */
-						0x0063 /* MX28_PAD_GPMI_D06__GPIO_0_6 */
+						MX28_PAD_GPMI_D00__GPIO_0_0
+						MX28_PAD_GPMI_D03__GPIO_0_3
+						MX28_PAD_GPMI_D06__GPIO_0_6
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 			};
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 37be532..be5a055 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -1,106 +1,139 @@
+/*
+ * Copyright 2012 Shawn Guo <shawn.guo@linaro.org>
+ * Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
 /dts-v1/;
-/include/ "imx28.dtsi"
+#include "imx28.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Ka-Ro electronics TX28 module";
 	compatible = "karo,tx28", "fsl,imx28";
 
+	aliases {
+		can0 = &can0;
+		can1 = &can1;
+		display = &display;
+		ds1339 = &ds1339;
+		gpio5 = &gpio5;
+		lcdif = &lcdif;
+		lcdif_23bit_pins = &tx28_lcdif_23bit_pins;
+		lcdif_24bit_pins = &lcdif_24bit_pins_a;
+		stk5led = &user_led;
+		usbotg = &usb0;
+	};
+
 	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					     &mmc0_cd_cfg
-					     &mmc0_sck_cfg>;
-				bus-width = <4>;
-				status = "okay";
-			};
+		reg = <0 0>; /* will be filled in by U-Boot */
+	};
 
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 */
-					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
-				};
-
-				mac0_pins_gpio: mac0-gpio-mode@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						0x4003 /* MX28_PAD_ENET0_MDC__GPIO_4_0 */
-						0x4013 /* MX28_PAD_ENET0_MDIO__GPIO_4_1 */
-						0x4023 /* MX28_PAD_ENET0_RX_EN__GPIO_4_2 */
-						0x4033 /* MX28_PAD_ENET0_RXD0__GPIO_4_3 */
-						0x4043 /* MX28_PAD_ENET0_RXD1__GPIO_4_4 */
-						0x4063 /* MX28_PAD_ENET0_TX_EN__GPIO_4_6 */
-						0x4073 /* MX28_PAD_ENET0_TXD0__GPIO_4_7 */
-						0x4083 /* MX28_PAD_ENET0_TXD1__GPIO_4_8 */
-						0x4103 /* MX28_PAD_ENET_CLK__GPIO_4_16 */
-					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
-				};
-			};
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&gpio2 7 0>;
+		status = "disabled";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_usb0_vbus: usb0_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio0 18 0>;
+			enable-active-high;
 		};
 
-		apbx@80040000 {
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
+		reg_usb1_vbus: usb1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 27 0>;
+			enable-active-high;
+		};
 
-				ds1339: rtc@68 {
-					compatible = "mxim,ds1339";
-					reg = <0x68>;
-				};
-			};
+		reg_2p5v: 2p5v {
+			compatible = "regulator-fixed";
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
 
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm0_pins_a>;
-				status = "okay";
-			};
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
 
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_4pins_a>;
-				status = "okay";
-			};
+		reg_can_xcvr: can-xcvr {
+			compatible = "regulator-fixed";
+			regulator-name = "CAN XCVR";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 0 0>;
+			enable-active-low;
+			pinctrl-names = "default";
+			pinctrl-0 = <&tx28_flexcan_xcvr_pins>;
+		};
 
-			auart1: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart1_pins_a>;
-				status = "okay";
-			};
+		reg_lcd: lcd-power {
+			compatible = "regulator-fixed";
+			regulator-name = "LCD POWER";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 31 0>;
+			enable-active-high;
+		};
+
+		reg_lcd_reset: lcd-reset {
+			compatible = "regulator-fixed";
+			regulator-name = "LCD RESET";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 30 0>;
+			startup-delay-us = <300000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
 		};
 	};
 
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default", "gpio_mode";
-			pinctrl-0 = <&mac0_pins_a>;
-			pinctrl-1 = <&mac0_pins_gpio>;
-			status = "okay";
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mclk: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
 		};
 	};
 
+	sound {
+		compatible = "fsl,imx28-tx28-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "imx28-tx28-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
-		user {
+		user_led: user {
 			label = "Heartbeat";
 			gpios = <&gpio4 10 0>;
 			linux,default-trigger = "heartbeat";
@@ -109,8 +142,512 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
+		pwms = <&pwm 0 500000>;
+		/*
+		 * a silly way to create a 1:1 relationship between the
+		 * PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	matrix_keypad: matrix-keypad@0 {
+		compatible = "gpio-matrix-keypad";
+		col-gpios = <
+			&gpio5 0 0
+			&gpio5 1 0
+			&gpio5 2 0
+			&gpio5 3 0
+		>;
+		row-gpios = <
+			&gpio5 4 0
+			&gpio5 5 0
+			&gpio5 6 0
+			&gpio5 7 0
+		>;
+		/* sample keymap */
+		linux,keymap = <
+			0x00000074 /* row 0, col 0, KEY_POWER */
+			0x00010052 /* row 0, col 1, KEY_KP0 */
+			0x0002004f /* row 0, col 2, KEY_KP1 */
+			0x00030050 /* row 0, col 3, KEY_KP2 */
+			0x01000051 /* row 1, col 0, KEY_KP3 */
+			0x0101004b /* row 1, col 1, KEY_KP4 */
+			0x0102004c /* row 1, col 2, KEY_KP5 */
+			0x0103004d /* row 1, col 3, KEY_KP6 */
+			0x02000047 /* row 2, col 0, KEY_KP7 */
+			0x02010048 /* row 2, col 1, KEY_KP8 */
+			0x02020049 /* row 2, col 2, KEY_KP9 */
+		>;
+		gpio-activelow;
+		linux,wakeup;
+		debounce-delay-ms = <100>;
+		col-scan-delay-us = <5000>;
+		linux,no-autorepeat;
+	};
+};
+
+/* 2nd TX-Std UART - (A)UART1  */
+&auart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart1_pins_a>;
+	status = "okay";
+};
+
+/* 3rd TX-Std UART - (A)UART3  */
+&auart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart3_pins_a>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins_a>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&digctl {
+	status = "okay";
+};
+
+/* 1st TX-Std UART - (D)UART */
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_4pins_a>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	sgtl5000: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&mclk>;
+	};
+
+	gpio5: pca953x@20 {
+		compatible = "nxp,pca9554";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tx28_pca9554_pins>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <28 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	polytouch: edt-ft5x06@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tx28_edt_ft5x06_pins>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <5 0>;
+		reset-gpios = <&gpio2 6 1>;
+		wake-gpios = <&gpio4 9 0>;
+	};
+
+	touchscreen: tsc2007@48 {
+		compatible = "ti,tsc2007";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tx28_tsc2007_pins>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 0>;
+		pendown-gpio = <&gpio3 20 1>;
+		ti,x-plate-ohms = /bits/ 16 <660>;
+	};
+
+	ds1339: rtc@68 {
+		compatible = "mxim,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_sync_pins_a &tx28_lcdif_ctrl_pins>;
+	lcd-supply = <&reg_lcd>;
+	display = <&display>;
+	status = "okay";
+
+	display: display@0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+		display-timings {
+			native-mode = <&timing5>;
+			timing0: timing0 {
+				panel-name = "VGA";
+				clock-frequency = <25175000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing1: timing1 {
+				panel-name = "ETV570";
+				clock-frequency = <25175000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing2: timing2 {
+				panel-name = "ET0350";
+				clock-frequency = <6500000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing3: timing3 {
+				panel-name = "ET0430";
+				clock-frequency = <9000000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing4: timing4 {
+				panel-name = "ET0500", "ET0700";
+				clock-frequency = <33260000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing5: timing5 {
+				panel-name = "ETQ570";
+				clock-frequency = <6400000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default", "gpio_mode";
+	pinctrl-0 = <&mac0_pins_a>;
+	pinctrl-1 = <&tx28_mac0_pins_gpio>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	/* not enabled by default */
+};
+
+&mxs_rtc {
+	status = "okay";
+};
+
+&ocotp {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_ENET0_RXD3__GPIO_4_10 /* module LED */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_edt_ft5x06_pins: tx28-edt-ft5x06-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA6__GPIO_2_6 /* RESET */
+			MX28_PAD_SSP0_DATA5__GPIO_2_5 /* IRQ */
+			MX28_PAD_ENET0_RXD2__GPIO_4_9 /* WAKE */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_flexcan_xcvr_pins: tx28-flexcan-xcvr-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D00__GPIO_1_0
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_lcdif_23bit_pins: tx28-lcdif-23bit {
+		fsl,pinmux-ids = <
+			/* LCD_D00 may be used as Flexcan Transceiver Enable on STK5-V5 */
+			MX28_PAD_LCD_D01__LCD_D1
+			MX28_PAD_LCD_D02__LCD_D2
+			MX28_PAD_LCD_D03__LCD_D3
+			MX28_PAD_LCD_D04__LCD_D4
+			MX28_PAD_LCD_D05__LCD_D5
+			MX28_PAD_LCD_D06__LCD_D6
+			MX28_PAD_LCD_D07__LCD_D7
+			MX28_PAD_LCD_D08__LCD_D8
+			MX28_PAD_LCD_D09__LCD_D9
+			MX28_PAD_LCD_D10__LCD_D10
+			MX28_PAD_LCD_D11__LCD_D11
+			MX28_PAD_LCD_D12__LCD_D12
+			MX28_PAD_LCD_D13__LCD_D13
+			MX28_PAD_LCD_D14__LCD_D14
+			MX28_PAD_LCD_D15__LCD_D15
+			MX28_PAD_LCD_D16__LCD_D16
+			MX28_PAD_LCD_D17__LCD_D17
+			MX28_PAD_LCD_D18__LCD_D18
+			MX28_PAD_LCD_D19__LCD_D19
+			MX28_PAD_LCD_D20__LCD_D20
+			MX28_PAD_LCD_D21__LCD_D21
+			MX28_PAD_LCD_D22__LCD_D22
+			MX28_PAD_LCD_D23__LCD_D23
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_lcdif_ctrl_pins: tx28-lcdif-ctrl {
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_ENABLE__GPIO_1_31 /* Enable */
+			MX28_PAD_LCD_RESET__GPIO_3_30  /* Reset */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_mac0_pins_gpio: tx28-mac0-gpio-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_ENET0_MDC__GPIO_4_0
+			MX28_PAD_ENET0_MDIO__GPIO_4_1
+			MX28_PAD_ENET0_RX_EN__GPIO_4_2
+			MX28_PAD_ENET0_RXD0__GPIO_4_3
+			MX28_PAD_ENET0_RXD1__GPIO_4_4
+			MX28_PAD_ENET0_TX_EN__GPIO_4_6
+			MX28_PAD_ENET0_TXD0__GPIO_4_7
+			MX28_PAD_ENET0_TXD1__GPIO_4_8
+			MX28_PAD_ENET_CLK__GPIO_4_16
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_pca9554_pins: tx28-pca9554-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_PWM3__GPIO_3_28
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_tsc2007_pins: tx28-tsc2007-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_SAIF0_MCLK__GPIO_3_20 /* TSC2007 IRQ */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+
+	tx28_usbphy0_pins: tx28-usbphy0-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_CE2N__GPIO_0_18 /* USBOTG_VBUSEN */
+			MX28_PAD_GPMI_CE3N__GPIO_0_19 /* USBOTH_OC */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_12mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_usbphy1_pins: tx28-usbphy1-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_SPDIF__GPIO_3_27 /* USBH_VBUSEN */
+			MX28_PAD_JTAG_RTCK__GPIO_4_20 /* USBH_OC */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_12mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_b>;
+	fsl,saif-master;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default", "special";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		     &mmc0_cd_cfg
+		     &mmc0_sck_cfg>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssp3 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi3_pins_a>;
+	clock-frequency = <57600000>;
+	status = "okay";
+
+	spidev0: spi@0 {
+		compatible = "spidev";
+		reg = <0>;
+		spi-max-frequency = <57600000>;
+	};
+
+	spidev1: spi@1 {
+		compatible = "spidev";
+		reg = <1>;
+		spi-max-frequency = <57600000>;
 	};
 };
+
+&usb0 {
+	vbus-supply = <&reg_usb0_vbus>;
+	disable-over-current;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tx28_usbphy0_pins>;
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbphy1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tx28_usbphy1_pins>;
+	phy_type = "utmi";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 9524a05..cda19c8 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -9,12 +9,15 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+#include "imx28-pinfunc.h"
 
 / {
 	interrupt-parent = <&icoll>;
 
 	aliases {
+		ethernet0 = &mac0;
+		ethernet1 = &mac1;
 		gpio0 = &gpio0;
 		gpio1 = &gpio1;
 		gpio2 = &gpio2;
@@ -27,8 +30,8 @@
 		serial2 = &auart2;
 		serial3 = &auart3;
 		serial4 = &auart4;
-		ethernet0 = &mac0;
-		ethernet1 = &mac1;
+		spi0 = &ssp1;
+		spi1 = &ssp2;
 	};
 
 	cpus {
@@ -62,9 +65,9 @@
 				reg = <0x80000000 0x2000>;
 			};
 
-			hsadc@80002000 {
+			hsadc: hsadc@80002000 {
 				reg = <0x80002000 0x2000>;
-				interrupts = <13 87>;
+				interrupts = <13>;
 				dmas = <&dma_apbh 12>;
 				dma-names = "rx";
 				status = "disabled";
@@ -86,25 +89,24 @@
 				clocks = <&clks 25>;
 			};
 
-			perfmon@80006000 {
+			perfmon: perfmon@80006000 {
 				reg = <0x80006000 0x800>;
 				interrupts = <27>;
 				status = "disabled";
 			};
 
-			gpmi-nand@8000c000 {
+			gpmi: gpmi-nand@8000c000 {
 				compatible = "fsl,imx28-gpmi-nand";
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
 				reg-names = "gpmi-nand", "bch";
-				interrupts = <88>, <41>;
-				interrupt-names = "gpmi-dma", "bch";
+				interrupts = <41>;
+				interrupt-names = "bch";
 				clocks = <&clks 50>;
 				clock-names = "gpmi_io";
 				dmas = <&dma_apbh 4>;
 				dma-names = "rx-tx";
-				fsl,gpmi-dma-channel = <4>;
 				status = "disabled";
 			};
 
@@ -112,11 +114,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x80010000 0x2000>;
-				interrupts = <96 82>;
+				interrupts = <96>;
 				clocks = <&clks 46>;
 				dmas = <&dma_apbh 0>;
 				dma-names = "rx-tx";
-				fsl,ssp-dma-channel = <0>;
 				status = "disabled";
 			};
 
@@ -124,11 +125,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x80012000 0x2000>;
-				interrupts = <97 83>;
+				interrupts = <97>;
 				clocks = <&clks 47>;
 				dmas = <&dma_apbh 1>;
 				dma-names = "rx-tx";
-				fsl,ssp-dma-channel = <1>;
 				status = "disabled";
 			};
 
@@ -136,11 +136,10 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x80014000 0x2000>;
-				interrupts = <98 84>;
+				interrupts = <98>;
 				clocks = <&clks 48>;
 				dmas = <&dma_apbh 2>;
 				dma-names = "rx-tx";
-				fsl,ssp-dma-channel = <2>;
 				status = "disabled";
 			};
 
@@ -148,15 +147,14 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x80016000 0x2000>;
-				interrupts = <99 85>;
+				interrupts = <99>;
 				clocks = <&clks 49>;
 				dmas = <&dma_apbh 3>;
 				dma-names = "rx-tx";
-				fsl,ssp-dma-channel = <3>;
 				status = "disabled";
 			};
 
-			pinctrl@80018000 {
+			pinctrl: pinctrl@80018000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx28-pinctrl", "simple-bus";
@@ -210,509 +208,590 @@
 				duart_pins_a: duart@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3102 /* MX28_PAD_PWM0__DUART_RX */
-						0x3112 /* MX28_PAD_PWM1__DUART_TX */
+						MX28_PAD_PWM0__DUART_RX
+						MX28_PAD_PWM1__DUART_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				duart_pins_b: duart@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
-						0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
+						MX28_PAD_AUART0_CTS__DUART_RX
+						MX28_PAD_AUART0_RTS__DUART_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				duart_4pins_a: duart-4pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
-						0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
-						0x3002 /* MX28_PAD_AUART0_RX__DUART_CTS */
-						0x3012 /* MX28_PAD_AUART0_TX__DUART_RTS */
+						MX28_PAD_AUART0_CTS__DUART_RX
+						MX28_PAD_AUART0_RTS__DUART_TX
+						MX28_PAD_AUART0_RX__DUART_CTS
+						MX28_PAD_AUART0_TX__DUART_RTS
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				gpmi_pins_a: gpmi-nand@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0000 /* MX28_PAD_GPMI_D00__GPMI_D0 */
-						0x0010 /* MX28_PAD_GPMI_D01__GPMI_D1 */
-						0x0020 /* MX28_PAD_GPMI_D02__GPMI_D2 */
-						0x0030 /* MX28_PAD_GPMI_D03__GPMI_D3 */
-						0x0040 /* MX28_PAD_GPMI_D04__GPMI_D4 */
-						0x0050 /* MX28_PAD_GPMI_D05__GPMI_D5 */
-						0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */
-						0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */
-						0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */
-						0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */
-						0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
-						0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
-						0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */
-						0x01b0 /* MX28_PAD_GPMI_CLE__GPMI_CLE */
-						0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
+						MX28_PAD_GPMI_D00__GPMI_D0
+						MX28_PAD_GPMI_D01__GPMI_D1
+						MX28_PAD_GPMI_D02__GPMI_D2
+						MX28_PAD_GPMI_D03__GPMI_D3
+						MX28_PAD_GPMI_D04__GPMI_D4
+						MX28_PAD_GPMI_D05__GPMI_D5
+						MX28_PAD_GPMI_D06__GPMI_D6
+						MX28_PAD_GPMI_D07__GPMI_D7
+						MX28_PAD_GPMI_CE0N__GPMI_CE0N
+						MX28_PAD_GPMI_RDY0__GPMI_READY0
+						MX28_PAD_GPMI_RDN__GPMI_RDN
+						MX28_PAD_GPMI_WRN__GPMI_WRN
+						MX28_PAD_GPMI_ALE__GPMI_ALE
+						MX28_PAD_GPMI_CLE__GPMI_CLE
+						MX28_PAD_GPMI_RESETN__GPMI_RESETN
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				gpmi_status_cfg: gpmi-status-cfg {
 					fsl,pinmux-ids = <
-						0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
-						0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
-						0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
+						MX28_PAD_GPMI_RDN__GPMI_RDN
+						MX28_PAD_GPMI_WRN__GPMI_WRN
+						MX28_PAD_GPMI_RESETN__GPMI_RESETN
 					>;
-					fsl,drive-strength = <2>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
 				};
 
 				auart0_pins_a: auart0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
-						0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
-						0x3020 /* MX28_PAD_AUART0_CTS__AUART0_CTS */
-						0x3030 /* MX28_PAD_AUART0_RTS__AUART0_RTS */
+						MX28_PAD_AUART0_RX__AUART0_RX
+						MX28_PAD_AUART0_TX__AUART0_TX
+						MX28_PAD_AUART0_CTS__AUART0_CTS
+						MX28_PAD_AUART0_RTS__AUART0_RTS
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart0_2pins_a: auart0-2pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
-						0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
+						MX28_PAD_AUART0_RX__AUART0_RX
+						MX28_PAD_AUART0_TX__AUART0_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart1_pins_a: auart1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
-						0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
-						0x3060 /* MX28_PAD_AUART1_CTS__AUART1_CTS */
-						0x3070 /* MX28_PAD_AUART1_RTS__AUART1_RTS */
+						MX28_PAD_AUART1_RX__AUART1_RX
+						MX28_PAD_AUART1_TX__AUART1_TX
+						MX28_PAD_AUART1_CTS__AUART1_CTS
+						MX28_PAD_AUART1_RTS__AUART1_RTS
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart1_2pins_a: auart1-2pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
-						0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
+						MX28_PAD_AUART1_RX__AUART1_RX
+						MX28_PAD_AUART1_TX__AUART1_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart2_2pins_a: auart2-2pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2101 /* MX28_PAD_SSP2_SCK__AUART2_RX */
-						0x2111 /* MX28_PAD_SSP2_MOSI__AUART2_TX */
+						MX28_PAD_SSP2_SCK__AUART2_RX
+						MX28_PAD_SSP2_MOSI__AUART2_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart2_2pins_b: auart2-2pins@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3080 /* MX28_PAD_AUART2_RX__AUART2_RX */
-						0x3090 /* MX28_PAD_AUART2_TX__AUART2_TX */
+						MX28_PAD_AUART2_RX__AUART2_RX
+						MX28_PAD_AUART2_TX__AUART2_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart3_pins_a: auart3@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
-						0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
-						0x30e0 /* MX28_PAD_AUART3_CTS__AUART3_CTS */
-						0x30f0 /* MX28_PAD_AUART3_RTS__AUART3_RTS */
+						MX28_PAD_AUART3_RX__AUART3_RX
+						MX28_PAD_AUART3_TX__AUART3_TX
+						MX28_PAD_AUART3_CTS__AUART3_CTS
+						MX28_PAD_AUART3_RTS__AUART3_RTS
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart3_2pins_a: auart3-2pins@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2121 /* MX28_PAD_SSP2_MISO__AUART3_RX */
-						0x2131 /* MX28_PAD_SSP2_SS0__AUART3_TX */
+						MX28_PAD_SSP2_MISO__AUART3_RX
+						MX28_PAD_SSP2_SS0__AUART3_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart3_2pins_b: auart3-2pins@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
-						0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
+						MX28_PAD_AUART3_RX__AUART3_RX
+						MX28_PAD_AUART3_TX__AUART3_TX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				auart4_2pins_a: auart4@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2181 /* MX28_PAD_SSP3_SCK__AUART4_TX */
-						0x2191 /* MX28_PAD_SSP3_MOSI__AUART4_RX */
+						MX28_PAD_SSP3_SCK__AUART4_TX
+						MX28_PAD_SSP3_MOSI__AUART4_RX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				mac0_pins_a: mac0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x4000 /* MX28_PAD_ENET0_MDC__ENET0_MDC */
-						0x4010 /* MX28_PAD_ENET0_MDIO__ENET0_MDIO */
-						0x4020 /* MX28_PAD_ENET0_RX_EN__ENET0_RX_EN */
-						0x4030 /* MX28_PAD_ENET0_RXD0__ENET0_RXD0 */
-						0x4040 /* MX28_PAD_ENET0_RXD1__ENET0_RXD1 */
-						0x4060 /* MX28_PAD_ENET0_TX_EN__ENET0_TX_EN */
-						0x4070 /* MX28_PAD_ENET0_TXD0__ENET0_TXD0 */
-						0x4080 /* MX28_PAD_ENET0_TXD1__ENET0_TXD1 */
-						0x4100 /* MX28_PAD_ENET_CLK__CLKCTRL_ENET */
+						MX28_PAD_ENET0_MDC__ENET0_MDC
+						MX28_PAD_ENET0_MDIO__ENET0_MDIO
+						MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
+						MX28_PAD_ENET0_RXD0__ENET0_RXD0
+						MX28_PAD_ENET0_RXD1__ENET0_RXD1
+						MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
+						MX28_PAD_ENET0_TXD0__ENET0_TXD0
+						MX28_PAD_ENET0_TXD1__ENET0_TXD1
+						MX28_PAD_ENET_CLK__CLKCTRL_ENET
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mac1_pins_a: mac1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x40f1 /* MX28_PAD_ENET0_CRS__ENET1_RX_EN */
-						0x4091 /* MX28_PAD_ENET0_RXD2__ENET1_RXD0 */
-						0x40a1 /* MX28_PAD_ENET0_RXD3__ENET1_RXD1 */
-						0x40e1 /* MX28_PAD_ENET0_COL__ENET1_TX_EN */
-						0x40b1 /* MX28_PAD_ENET0_TXD2__ENET1_TXD0 */
-						0x40c1 /* MX28_PAD_ENET0_TXD3__ENET1_TXD1 */
+						MX28_PAD_ENET0_CRS__ENET1_RX_EN
+						MX28_PAD_ENET0_RXD2__ENET1_RXD0
+						MX28_PAD_ENET0_RXD3__ENET1_RXD1
+						MX28_PAD_ENET0_COL__ENET1_TX_EN
+						MX28_PAD_ENET0_TXD2__ENET1_TXD0
+						MX28_PAD_ENET0_TXD3__ENET1_TXD1
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mmc0_8bit_pins_a: mmc0-8bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
-						0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
-						0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
-						0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
-						0x2040 /* MX28_PAD_SSP0_DATA4__SSP0_D4 */
-						0x2050 /* MX28_PAD_SSP0_DATA5__SSP0_D5 */
-						0x2060 /* MX28_PAD_SSP0_DATA6__SSP0_D6 */
-						0x2070 /* MX28_PAD_SSP0_DATA7__SSP0_D7 */
-						0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
-						0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
-						0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
+						MX28_PAD_SSP0_DATA0__SSP0_D0
+						MX28_PAD_SSP0_DATA1__SSP0_D1
+						MX28_PAD_SSP0_DATA2__SSP0_D2
+						MX28_PAD_SSP0_DATA3__SSP0_D3
+						MX28_PAD_SSP0_DATA4__SSP0_D4
+						MX28_PAD_SSP0_DATA5__SSP0_D5
+						MX28_PAD_SSP0_DATA6__SSP0_D6
+						MX28_PAD_SSP0_DATA7__SSP0_D7
+						MX28_PAD_SSP0_CMD__SSP0_CMD
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+						MX28_PAD_SSP0_SCK__SSP0_SCK
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mmc0_4bit_pins_a: mmc0-4bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
-						0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
-						0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
-						0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
-						0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
-						0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
-						0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
+						MX28_PAD_SSP0_DATA0__SSP0_D0
+						MX28_PAD_SSP0_DATA1__SSP0_D1
+						MX28_PAD_SSP0_DATA2__SSP0_D2
+						MX28_PAD_SSP0_DATA3__SSP0_D3
+						MX28_PAD_SSP0_CMD__SSP0_CMD
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+						MX28_PAD_SSP0_SCK__SSP0_SCK
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				mmc0_cd_cfg: mmc0-cd-cfg {
 					fsl,pinmux-ids = <
-						0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 					>;
-					fsl,pull-up = <0>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				mmc0_sck_cfg: mmc0-sck-cfg {
 					fsl,pinmux-ids = <
-						0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
+						MX28_PAD_SSP0_SCK__SSP0_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc2_4bit_pins_a: mmc2-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA4__SSP2_D0
+						MX28_PAD_SSP1_SCK__SSP2_D1
+						MX28_PAD_SSP1_CMD__SSP2_D2
+						MX28_PAD_SSP0_DATA5__SSP2_D3
+						MX28_PAD_SSP0_DATA6__SSP2_CMD
+						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc2_cd_cfg: mmc2-cd-cfg {
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc2_sck_cfg: mmc2-sck-cfg {
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
 					>;
-					fsl,drive-strength = <2>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				i2c0_pins_a: i2c0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3180 /* MX28_PAD_I2C0_SCL__I2C0_SCL */
-						0x3190 /* MX28_PAD_I2C0_SDA__I2C0_SDA */
+						MX28_PAD_I2C0_SCL__I2C0_SCL
+						MX28_PAD_I2C0_SDA__I2C0_SDA
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				i2c0_pins_b: i2c0@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3001 /* MX28_PAD_AUART0_RX__I2C0_SCL */
-						0x3011 /* MX28_PAD_AUART0_TX__I2C0_SDA */
+						MX28_PAD_AUART0_RX__I2C0_SCL
+						MX28_PAD_AUART0_TX__I2C0_SDA
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				i2c1_pins_a: i2c1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3101 /* MX28_PAD_PWM0__I2C1_SCL */
-						0x3111 /* MX28_PAD_PWM1__I2C1_SDA */
+						MX28_PAD_PWM0__I2C1_SCL
+						MX28_PAD_PWM1__I2C1_SDA
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				saif0_pins_a: saif0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3140 /* MX28_PAD_SAIF0_MCLK__SAIF0_MCLK */
-						0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */
-						0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */
-						0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */
+						MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
+						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
+						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
+						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
 					>;
-					fsl,drive-strength = <2>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				saif0_pins_b: saif0@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
+						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
+						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				saif1_pins_a: saif1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31a0 /* MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 */
+						MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
 					>;
-					fsl,drive-strength = <2>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
 				pwm0_pins_a: pwm0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3100 /* MX28_PAD_PWM0__PWM_0 */
+						MX28_PAD_PWM0__PWM_0
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				pwm2_pins_a: pwm2@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x3120 /* MX28_PAD_PWM2__PWM_2 */
+						MX28_PAD_PWM2__PWM_2
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				pwm3_pins_a: pwm3@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31c0 /* MX28_PAD_PWM3__PWM_3 */
+						MX28_PAD_PWM3__PWM_3
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				pwm3_pins_b: pwm3@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3141 /* MX28_PAD_SAIF0_MCLK__PWM3 */
+						MX28_PAD_SAIF0_MCLK__PWM_3
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				pwm4_pins_a: pwm4@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x31d0 /* MX28_PAD_PWM4__PWM_4 */
+						MX28_PAD_PWM4__PWM_4
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_24bit_pins_a: lcdif-24bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
-						0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
-						0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
-						0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */
-						0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */
-						0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */
-						0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */
-						0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */
-						0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
+						MX28_PAD_LCD_D18__LCD_D18
+						MX28_PAD_LCD_D19__LCD_D19
+						MX28_PAD_LCD_D20__LCD_D20
+						MX28_PAD_LCD_D21__LCD_D21
+						MX28_PAD_LCD_D22__LCD_D22
+						MX28_PAD_LCD_D23__LCD_D23
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				lcdif_16bit_pins_a: lcdif-16bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
-						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
-						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
-						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
-						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
-						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
-						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
-						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
-						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
-						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
-						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
-						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
-						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
-						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
-						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
-						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_sync_pins_a: lcdif-sync@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				can0_pins_a: can0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0161 /* MX28_PAD_GPMI_RDY2__CAN0_TX */
-						0x0171 /* MX28_PAD_GPMI_RDY3__CAN0_RX */
+						MX28_PAD_GPMI_RDY2__CAN0_TX
+						MX28_PAD_GPMI_RDY3__CAN0_RX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				can1_pins_a: can1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0121 /* MX28_PAD_GPMI_CE2N__CAN1_TX */
-						0x0131 /* MX28_PAD_GPMI_CE3N__CAN1_RX */
+						MX28_PAD_GPMI_CE2N__CAN1_TX
+						MX28_PAD_GPMI_CE3N__CAN1_RX
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				spi2_pins_a: spi2@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */
-						0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */
-						0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */
-						0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */
+						MX28_PAD_SSP2_SCK__SSP2_SCK
+						MX28_PAD_SSP2_MOSI__SSP2_CMD
+						MX28_PAD_SSP2_MISO__SSP2_D0
+						MX28_PAD_SSP2_SS0__SSP2_D3
 					>;
-					fsl,drive-strength = <1>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				spi3_pins_a: spi3@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART2_RX__SSP3_D4
+						MX28_PAD_AUART2_TX__SSP3_D5
+						MX28_PAD_SSP3_SCK__SSP3_SCK
+						MX28_PAD_SSP3_MOSI__SSP3_CMD
+						MX28_PAD_SSP3_MISO__SSP3_D0
+						MX28_PAD_SSP3_SS0__SSP3_D3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				usbphy0_pins_a: usbphy0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2152 /* MX28_PAD_SSP2_SS2__USB0_OVERCURRENT */
+						MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
 					>;
-					fsl,drive-strength = <2>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				usbphy0_pins_b: usbphy0@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
-						0x3061 /* MX28_PAD_AUART1_CTS__USB0_OVERCURRENT */
+						MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
 					>;
-					fsl,drive-strength = <2>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				usbphy1_pins_a: usbphy1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2142 /* MX28_PAD_SSP2_SS1__USB1_OVERCURRENT */
+						MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
 					>;
-					fsl,drive-strength = <2>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				usb0_id_pins_a: usb0id@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RTS__USB0_ID
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 			};
 
-			digctl@8001c000 {
+			digctl: digctl@8001c000 {
 				compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
 				reg = <0x8001c000 0x2000>;
 				interrupts = <89>;
 				status = "disabled";
 			};
 
-			etm@80022000 {
+			etm: etm@80022000 {
 				reg = <0x80022000 0x2000>;
 				status = "disabled";
 			};
@@ -733,19 +812,19 @@
 				clocks = <&clks 26>;
 			};
 
-			dcp@80028000 {
+			dcp: dcp@80028000 {
 				reg = <0x80028000 0x2000>;
 				interrupts = <52 53 54>;
 				compatible = "fsl-dcp";
 			};
 
-			pxp@8002a000 {
+			pxp: pxp@8002a000 {
 				reg = <0x8002a000 0x2000>;
 				interrupts = <39>;
 				status = "disabled";
 			};
 
-			ocotp@8002c000 {
+			ocotp: ocotp@8002c000 {
 				compatible = "fsl,ocotp";
 				reg = <0x8002c000 0x2000>;
 				status = "disabled";
@@ -756,10 +835,10 @@
 				status = "disabled";
 			};
 
-			lcdif@80030000 {
+			lcdif: lcdif@80030000 {
 				compatible = "fsl,imx28-lcdif";
 				reg = <0x80030000 0x2000>;
-				interrupts = <38 86>;
+				interrupts = <38>;
 				clocks = <&clks 55>;
 				dmas = <&dma_apbh 13>;
 				dma-names = "rx";
@@ -784,41 +863,41 @@
 				status = "disabled";
 			};
 
-			simdbg@8003c000 {
+			simdbg: simdbg@8003c000 {
 				reg = <0x8003c000 0x200>;
 				status = "disabled";
 			};
 
-			simgpmisel@8003c200 {
+			simgpmisel: simgpmisel@8003c200 {
 				reg = <0x8003c200 0x100>;
 				status = "disabled";
 			};
 
-			simsspsel@8003c300 {
+			simsspsel: simsspsel@8003c300 {
 				reg = <0x8003c300 0x100>;
 				status = "disabled";
 			};
 
-			simmemsel@8003c400 {
+			simmemsel: simmemsel@8003c400 {
 				reg = <0x8003c400 0x100>;
 				status = "disabled";
 			};
 
-			gpiomon@8003c500 {
+			gpiomon: gpiomon@8003c500 {
 				reg = <0x8003c500 0x100>;
 				status = "disabled";
 			};
 
-			simenet@8003c700 {
+			simenet: simenet@8003c700 {
 				reg = <0x8003c700 0x100>;
 				status = "disabled";
 			};
 
-			armjtag@8003c800 {
+			armjtag: armjtag@8003c800 {
 				reg = <0x8003c800 0x100>;
 				status = "disabled";
 			};
-                };
+		};
 
 		apbx@80040000 {
 			compatible = "simple-bus";
@@ -836,16 +915,15 @@
 			saif0: saif@80042000 {
 				compatible = "fsl,imx28-saif";
 				reg = <0x80042000 0x2000>;
-				interrupts = <59 80>;
+				interrupts = <59>;
 				#clock-cells = <0>;
 				clocks = <&clks 53>;
 				dmas = <&dma_apbx 4>;
 				dma-names = "rx-tx";
-				fsl,saif-dma-channel = <4>;
 				status = "disabled";
 			};
 
-			power@80044000 {
+			power: power@80044000 {
 				reg = <0x80044000 0x2000>;
 				status = "disabled";
 			};
@@ -853,31 +931,31 @@
 			saif1: saif@80046000 {
 				compatible = "fsl,imx28-saif";
 				reg = <0x80046000 0x2000>;
-				interrupts = <58 81>;
+				interrupts = <58>;
 				clocks = <&clks 54>;
 				dmas = <&dma_apbx 5>;
 				dma-names = "rx-tx";
-				fsl,saif-dma-channel = <5>;
 				status = "disabled";
 			};
 
-			lradc@80050000 {
+			lradc: lradc@80050000 {
 				compatible = "fsl,imx28-lradc";
 				reg = <0x80050000 0x2000>;
 				interrupts = <10 14 15 16 17 18 19
 						20 21 22 23 24 25>;
 				status = "disabled";
+				clocks = <&clks 41>;
 			};
 
-			spdif@80054000 {
+			spdif: spdif@80054000 {
 				reg = <0x80054000 0x2000>;
-				interrupts = <45 66>;
+				interrupts = <45>;
 				dmas = <&dma_apbx 2>;
 				dma-names = "tx";
 				status = "disabled";
 			};
 
-			rtc@80056000 {
+			mxs_rtc: rtc@80056000 {
 				compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
 				reg = <0x80056000 0x2000>;
 				interrupts = <29>;
@@ -888,11 +966,10 @@
 				#size-cells = <0>;
 				compatible = "fsl,imx28-i2c";
 				reg = <0x80058000 0x2000>;
-				interrupts = <111 68>;
+				interrupts = <111>;
 				clock-frequency = <100000>;
 				dmas = <&dma_apbx 6>;
 				dma-names = "rx-tx";
-				fsl,i2c-dma-channel = <6>;
 				status = "disabled";
 			};
 
@@ -901,11 +978,10 @@
 				#size-cells = <0>;
 				compatible = "fsl,imx28-i2c";
 				reg = <0x8005a000 0x2000>;
-				interrupts = <110 69>;
+				interrupts = <110>;
 				clock-frequency = <100000>;
 				dmas = <&dma_apbx 7>;
 				dma-names = "rx-tx";
-				fsl,i2c-dma-channel = <7>;
 				status = "disabled";
 			};
 
@@ -918,7 +994,7 @@
 				status = "disabled";
 			};
 
-			timrot@80068000 {
+			timer: timrot@80068000 {
 				compatible = "fsl,imx28-timrot", "fsl,timrot";
 				reg = <0x80068000 0x2000>;
 				interrupts = <48 49 50 51>;
@@ -928,10 +1004,9 @@
 			auart0: serial@8006a000 {
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x8006a000 0x2000>;
-				interrupts = <112 70 71>;
+				interrupts = <112>;
 				dmas = <&dma_apbx 8>, <&dma_apbx 9>;
 				dma-names = "rx", "tx";
-				fsl,auart-dma-channel = <8 9>;
 				clocks = <&clks 45>;
 				status = "disabled";
 			};
@@ -939,7 +1014,7 @@
 			auart1: serial@8006c000 {
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x8006c000 0x2000>;
-				interrupts = <113 72 73>;
+				interrupts = <113>;
 				dmas = <&dma_apbx 10>, <&dma_apbx 11>;
 				dma-names = "rx", "tx";
 				clocks = <&clks 45>;
@@ -949,7 +1024,7 @@
 			auart2: serial@8006e000 {
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x8006e000 0x2000>;
-				interrupts = <114 74 75>;
+				interrupts = <114>;
 				dmas = <&dma_apbx 12>, <&dma_apbx 13>;
 				dma-names = "rx", "tx";
 				clocks = <&clks 45>;
@@ -959,7 +1034,7 @@
 			auart3: serial@80070000 {
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x80070000 0x2000>;
-				interrupts = <115 76 77>;
+				interrupts = <115>;
 				dmas = <&dma_apbx 14>, <&dma_apbx 15>;
 				dma-names = "rx", "tx";
 				clocks = <&clks 45>;
@@ -969,7 +1044,7 @@
 			auart4: serial@80072000 {
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x80072000 0x2000>;
-				interrupts = <116 78 79>;
+				interrupts = <116>;
 				dmas = <&dma_apbx 0>, <&dma_apbx 1>;
 				dma-names = "rx", "tx";
 				clocks = <&clks 45>;
@@ -1026,7 +1101,7 @@
 			status = "disabled";
 		};
 
-		dflpt@800c0000 {
+		dflpt: dflpt@800c0000 {
 			reg = <0x800c0000 0x10000>;
 			status = "disabled";
 		};
@@ -1049,10 +1124,9 @@
 			status = "disabled";
 		};
 
-		switch@800f8000 {
+		etn_switch: switch@800f8000 {
 			reg = <0x800f8000 0x8000>;
 			status = "disabled";
 		};
-
 	};
 };
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi
index c544925..c34f825 100644
--- a/arch/arm/boot/dts/imx31.dtsi
+++ b/arch/arm/boot/dts/imx31.dtsi
@@ -20,6 +20,16 @@
 		serial4 = &uart5;
 	};
 
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm1136";
+			device_type = "cpu";
+		};
+	};
+
 	avic: avic-interrupt-controller@60000000 {
 		compatible = "fsl,imx31-avic", "fsl,avic";
 		interrupt-controller;
@@ -94,6 +104,13 @@
 				status = "disabled";
 			};
 
+			iim: iim@5001c000 {
+				compatible = "fsl,imx31-iim", "fsl,imx27-iim";
+				reg = <0x5001c000 0x1000>;
+				interrupts = <19>;
+				clocks = <&clks 25>;
+			};
+
 			clks: ccm@53f80000{
 				compatible = "fsl,imx31-ccm";
 				reg = <0x53f80000 0x4000>;
diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts
index 8f7f9ac..b360699 100644
--- a/arch/arm/boot/dts/imx51-apf51.dts
+++ b/arch/arm/boot/dts/imx51-apf51.dts
@@ -26,10 +26,6 @@
 	};
 
 	clocks {
-		ckih1 {
-			clock-frequency = <0>;
-		};
-
 		osc {
 			clock-frequency = <33554432>;
 		};
diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
index 123fe84..5a7f552 100644
--- a/arch/arm/boot/dts/imx51-apf51dev.dts
+++ b/arch/arm/boot/dts/imx51-apf51dev.dts
@@ -16,6 +16,33 @@
 	model = "Armadeus Systems APF51Dev docking/development board";
 	compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51";
 
+	display@di1 {
+		compatible = "fsl,imx-parallel-display";
+		crtcs = <&ipu 0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp1_1>;
+
+		display-timings {
+			lw700 {
+				native-mode;
+				clock-frequency = <33000033>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <96>;
+				hfront-porch = <96>;
+				vback-porch = <20>;
+				vfront-porch = <21>;
+				hsync-len = <64>;
+				vsync-len = <4>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index ad3471c..be1407c 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -27,6 +27,20 @@
 		interface-pix-fmt = "rgb24";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ipu_disp1_1>;
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: dvi {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
 	};
 
 	display@di1 {
@@ -35,6 +49,25 @@
 		interface-pix-fmt = "rgb565";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ipu_disp2_1>;
+		status = "disabled";
+		display-timings {
+			native-mode = <&timing1>;
+			timing1: claawvga {
+				clock-frequency = <27000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <40>;
+				hfront-porch = <60>;
+				vback-porch = <10>;
+				vfront-porch = <10>;
+				hsync-len = <20>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
 	};
 
 	gpio-keys {
@@ -63,6 +96,10 @@
 	};
 
 	clocks {
+		ckih1 {
+			clock-frequency = <22579200>;
+		};
+
 		clk_26M: codec_clock {
 			compatible = "fixed-clock";
 			reg=<0>;
@@ -91,7 +128,7 @@
 
 &uart3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3_1>;
+	pinctrl-0 = <&pinctrl_uart3_1 &pinctrl_uart3_rtscts_1>;
 	fsl,uart-has-rtscts;
 	status = "okay";
 };
@@ -108,6 +145,7 @@
 		#size-cells = <0>;
 		compatible = "fsl,mc13892";
 		spi-max-frequency = <6000000>;
+		spi-cs-high;
 		reg = <0>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <8 0x4>;
@@ -247,7 +285,7 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_1>;
+	pinctrl-0 = <&pinctrl_uart1_1 &pinctrl_uart1_rtscts_1>;
 	fsl,uart-has-rtscts;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 25764b5..f4dcff3 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -15,13 +15,18 @@
 
 / {
 	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
 		gpio3 = &gpio4;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &cspi;
 	};
 
 	tzic: tz-interrupt-controller@e0000000 {
@@ -42,7 +47,7 @@
 
 		ckih1 {
 			compatible = "fsl,imx-ckih1", "fixed-clock";
-			clock-frequency = <22579200>;
+			clock-frequency = <0>;
 		};
 
 		ckih2 {
@@ -81,6 +86,11 @@
 		interrupt-parent = <&tzic>;
 		ranges;
 
+		iram: iram@1ffe0000 {
+			compatible = "mmio-sram";
+			reg = <0x1ffe0000 0x20000>;
+		};
+
 		ipu: ipu@40000000 {
 			#crtc-cells = <1>;
 			compatible = "fsl,imx51-ipu";
@@ -149,6 +159,9 @@
 					reg = <0x70014000 0x4000>;
 					interrupts = <30>;
 					clocks = <&clks 49>;
+					dmas = <&sdma 24 1 0>,
+					       <&sdma 25 1 0>;
+					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
 					status = "disabled";
@@ -300,275 +313,6 @@
 			iomuxc: iomuxc@73fa8000 {
 				compatible = "fsl,imx51-iomuxc";
 				reg = <0x73fa8000 0x4000>;
-
-				audmux {
-					pinctrl_audmux_1: audmuxgrp-1 {
-						fsl,pins = <
-							MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000
-							MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000
-							MX51_PAD_AUD3_BB_CK__AUD3_TXC  0x80000000
-							MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000
-						>;
-					};
-				};
-
-				fec {
-					pinctrl_fec_1: fecgrp-1 {
-						fsl,pins = <
-							MX51_PAD_EIM_EB2__FEC_MDIO	   0x80000000
-							MX51_PAD_EIM_EB3__FEC_RDATA1	   0x80000000
-							MX51_PAD_EIM_CS2__FEC_RDATA2	   0x80000000
-							MX51_PAD_EIM_CS3__FEC_RDATA3	   0x80000000
-							MX51_PAD_EIM_CS4__FEC_RX_ER	   0x80000000
-							MX51_PAD_EIM_CS5__FEC_CRS	   0x80000000
-							MX51_PAD_NANDF_RB2__FEC_COL	   0x80000000
-							MX51_PAD_NANDF_RB3__FEC_RX_CLK	   0x80000000
-							MX51_PAD_NANDF_D9__FEC_RDATA0	   0x80000000
-							MX51_PAD_NANDF_D8__FEC_TDATA0	   0x80000000
-							MX51_PAD_NANDF_CS2__FEC_TX_ER	   0x80000000
-							MX51_PAD_NANDF_CS3__FEC_MDC	   0x80000000
-							MX51_PAD_NANDF_CS4__FEC_TDATA1	   0x80000000
-							MX51_PAD_NANDF_CS5__FEC_TDATA2	   0x80000000
-							MX51_PAD_NANDF_CS6__FEC_TDATA3	   0x80000000
-							MX51_PAD_NANDF_CS7__FEC_TX_EN	   0x80000000
-							MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x80000000
-						>;
-					};
-
-					pinctrl_fec_2: fecgrp-2 {
-						fsl,pins = <
-							MX51_PAD_DI_GP3__FEC_TX_ER	  0x80000000
-							MX51_PAD_DI2_PIN4__FEC_CRS	  0x80000000
-							MX51_PAD_DI2_PIN2__FEC_MDC	  0x80000000
-							MX51_PAD_DI2_PIN3__FEC_MDIO	  0x80000000
-							MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000
-							MX51_PAD_DI_GP4__FEC_RDATA2	  0x80000000
-							MX51_PAD_DISP2_DAT0__FEC_RDATA3   0x80000000
-							MX51_PAD_DISP2_DAT1__FEC_RX_ER	  0x80000000
-							MX51_PAD_DISP2_DAT6__FEC_TDATA1	  0x80000000
-							MX51_PAD_DISP2_DAT7__FEC_TDATA2	  0x80000000
-							MX51_PAD_DISP2_DAT8__FEC_TDATA3	  0x80000000
-							MX51_PAD_DISP2_DAT9__FEC_TX_EN	  0x80000000
-							MX51_PAD_DISP2_DAT10__FEC_COL	  0x80000000
-							MX51_PAD_DISP2_DAT11__FEC_RX_CLK  0x80000000
-							MX51_PAD_DISP2_DAT12__FEC_RX_DV	  0x80000000
-							MX51_PAD_DISP2_DAT13__FEC_TX_CLK  0x80000000
-							MX51_PAD_DISP2_DAT14__FEC_RDATA0  0x80000000
-							MX51_PAD_DISP2_DAT15__FEC_TDATA0  0x80000000
-						>;
-					};
-				};
-
-				ecspi1 {
-					pinctrl_ecspi1_1: ecspi1grp-1 {
-						fsl,pins = <
-							MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
-							MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
-							MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
-						>;
-					};
-				};
-
-				ecspi2 {
-					pinctrl_ecspi2_1: ecspi2grp-1 {
-						fsl,pins = <
-							MX51_PAD_NANDF_RB3__ECSPI2_MISO 0x185
-							MX51_PAD_NANDF_D15__ECSPI2_MOSI 0x185
-							MX51_PAD_NANDF_RB2__ECSPI2_SCLK 0x185
-						>;
-					};
-				};
-
-				esdhc1 {
-					pinctrl_esdhc1_1: esdhc1grp-1 {
-						fsl,pins = <
-							MX51_PAD_SD1_CMD__SD1_CMD     0x400020d5
-							MX51_PAD_SD1_CLK__SD1_CLK     0x20d5
-							MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
-							MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
-							MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
-							MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
-						>;
-					};
-				};
-
-				esdhc2 {
-					pinctrl_esdhc2_1: esdhc2grp-1 {
-						fsl,pins = <
-							MX51_PAD_SD2_CMD__SD2_CMD     0x400020d5
-							MX51_PAD_SD2_CLK__SD2_CLK     0x20d5
-							MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5
-							MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5
-							MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5
-							MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5
-						>;
-					};
-				};
-
-				i2c2 {
-					pinctrl_i2c2_1: i2c2grp-1 {
-						fsl,pins = <
-							MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed
-							MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed
-						>;
-					};
-
-					pinctrl_i2c2_2: i2c2grp-2 {
-						fsl,pins = <
-							MX51_PAD_EIM_D27__I2C2_SCL 0x400001ed
-							MX51_PAD_EIM_D24__I2C2_SDA 0x400001ed
-						>;
-					};
-				};
-
-				ipu_disp1 {
-					pinctrl_ipu_disp1_1: ipudisp1grp-1 {
-						fsl,pins = <
-							MX51_PAD_DISP1_DAT0__DISP1_DAT0	  0x5
-							MX51_PAD_DISP1_DAT1__DISP1_DAT1   0x5
-							MX51_PAD_DISP1_DAT2__DISP1_DAT2   0x5
-							MX51_PAD_DISP1_DAT3__DISP1_DAT3   0x5
-							MX51_PAD_DISP1_DAT4__DISP1_DAT4   0x5
-							MX51_PAD_DISP1_DAT5__DISP1_DAT5   0x5
-							MX51_PAD_DISP1_DAT6__DISP1_DAT6   0x5
-							MX51_PAD_DISP1_DAT7__DISP1_DAT7   0x5
-							MX51_PAD_DISP1_DAT8__DISP1_DAT8   0x5
-							MX51_PAD_DISP1_DAT9__DISP1_DAT9   0x5
-							MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5
-							MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5
-							MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5
-							MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5
-							MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5
-							MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5
-							MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5
-							MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5
-							MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5
-							MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5
-							MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5
-							MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5
-							MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5
-							MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5
-							MX51_PAD_DI1_PIN2__DI1_PIN2	  0x5 /* hsync */
-							MX51_PAD_DI1_PIN3__DI1_PIN3	  0x5 /* vsync */
-						>;
-					};
-				};
-
-				ipu_disp2 {
-					pinctrl_ipu_disp2_1: ipudisp2grp-1 {
-						fsl,pins = <
-							MX51_PAD_DISP2_DAT0__DISP2_DAT0     0x5
-							MX51_PAD_DISP2_DAT1__DISP2_DAT1     0x5
-							MX51_PAD_DISP2_DAT2__DISP2_DAT2     0x5
-							MX51_PAD_DISP2_DAT3__DISP2_DAT3     0x5
-							MX51_PAD_DISP2_DAT4__DISP2_DAT4     0x5
-							MX51_PAD_DISP2_DAT5__DISP2_DAT5     0x5
-							MX51_PAD_DISP2_DAT6__DISP2_DAT6     0x5
-							MX51_PAD_DISP2_DAT7__DISP2_DAT7     0x5
-							MX51_PAD_DISP2_DAT8__DISP2_DAT8     0x5
-							MX51_PAD_DISP2_DAT9__DISP2_DAT9     0x5
-							MX51_PAD_DISP2_DAT10__DISP2_DAT10   0x5
-							MX51_PAD_DISP2_DAT11__DISP2_DAT11   0x5
-							MX51_PAD_DISP2_DAT12__DISP2_DAT12   0x5
-							MX51_PAD_DISP2_DAT13__DISP2_DAT13   0x5
-							MX51_PAD_DISP2_DAT14__DISP2_DAT14   0x5
-							MX51_PAD_DISP2_DAT15__DISP2_DAT15   0x5
-							MX51_PAD_DI2_PIN2__DI2_PIN2	    0x5 /* hsync */
-							MX51_PAD_DI2_PIN3__DI2_PIN3	    0x5 /* vsync */
-							MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5
-							MX51_PAD_DI_GP4__DI2_PIN15	    0x5
-						>;
-					};
-				};
-
-				pata {
-					pinctrl_pata_1: patagrp-1 {
-						fsl,pins = <
-							MX51_PAD_NANDF_WE_B__PATA_DIOW		0x2004
-							MX51_PAD_NANDF_RE_B__PATA_DIOR		0x2004
-							MX51_PAD_NANDF_ALE__PATA_BUFFER_EN	0x2004
-							MX51_PAD_NANDF_CLE__PATA_RESET_B	0x2004
-							MX51_PAD_NANDF_WP_B__PATA_DMACK		0x2004
-							MX51_PAD_NANDF_RB0__PATA_DMARQ		0x2004
-							MX51_PAD_NANDF_RB1__PATA_IORDY		0x2004
-							MX51_PAD_GPIO_NAND__PATA_INTRQ		0x2004
-							MX51_PAD_NANDF_CS2__PATA_CS_0		0x2004
-							MX51_PAD_NANDF_CS3__PATA_CS_1		0x2004
-							MX51_PAD_NANDF_CS4__PATA_DA_0		0x2004
-							MX51_PAD_NANDF_CS5__PATA_DA_1		0x2004
-							MX51_PAD_NANDF_CS6__PATA_DA_2		0x2004
-							MX51_PAD_NANDF_D15__PATA_DATA15		0x2004
-							MX51_PAD_NANDF_D14__PATA_DATA14		0x2004
-							MX51_PAD_NANDF_D13__PATA_DATA13		0x2004
-							MX51_PAD_NANDF_D12__PATA_DATA12		0x2004
-							MX51_PAD_NANDF_D11__PATA_DATA11		0x2004
-							MX51_PAD_NANDF_D10__PATA_DATA10		0x2004
-							MX51_PAD_NANDF_D9__PATA_DATA9		0x2004
-							MX51_PAD_NANDF_D8__PATA_DATA8		0x2004
-							MX51_PAD_NANDF_D7__PATA_DATA7		0x2004
-							MX51_PAD_NANDF_D6__PATA_DATA6		0x2004
-							MX51_PAD_NANDF_D5__PATA_DATA5		0x2004
-							MX51_PAD_NANDF_D4__PATA_DATA4		0x2004
-							MX51_PAD_NANDF_D3__PATA_DATA3		0x2004
-							MX51_PAD_NANDF_D2__PATA_DATA2		0x2004
-							MX51_PAD_NANDF_D1__PATA_DATA1		0x2004
-							MX51_PAD_NANDF_D0__PATA_DATA0		0x2004
-						>;
-					};
-				};
-
-				uart1 {
-					pinctrl_uart1_1: uart1grp-1 {
-						fsl,pins = <
-							MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
-							MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
-							MX51_PAD_UART1_RTS__UART1_RTS 0x1c5
-							MX51_PAD_UART1_CTS__UART1_CTS 0x1c5
-						>;
-					};
-				};
-
-				uart2 {
-					pinctrl_uart2_1: uart2grp-1 {
-						fsl,pins = <
-							MX51_PAD_UART2_RXD__UART2_RXD 0x1c5
-							MX51_PAD_UART2_TXD__UART2_TXD 0x1c5
-						>;
-					};
-				};
-
-				uart3 {
-					pinctrl_uart3_1: uart3grp-1 {
-						fsl,pins = <
-							MX51_PAD_EIM_D25__UART3_RXD 0x1c5
-							MX51_PAD_EIM_D26__UART3_TXD 0x1c5
-							MX51_PAD_EIM_D27__UART3_RTS 0x1c5
-							MX51_PAD_EIM_D24__UART3_CTS 0x1c5
-						>;
-					};
-
-					pinctrl_uart3_2: uart3grp-2 {
-						fsl,pins = <
-							MX51_PAD_UART3_RXD__UART3_RXD 0x1c5
-							MX51_PAD_UART3_TXD__UART3_TXD 0x1c5
-						>;
-					};
-				};
-
-				kpp {
-					pinctrl_kpp_1: kppgrp-1 {
-						fsl,pins = <
-							MX51_PAD_KEY_ROW0__KEY_ROW0 0xe0
-							MX51_PAD_KEY_ROW1__KEY_ROW1 0xe0
-							MX51_PAD_KEY_ROW2__KEY_ROW2 0xe0
-							MX51_PAD_KEY_ROW3__KEY_ROW3 0xe0
-							MX51_PAD_KEY_COL0__KEY_COL0 0xe8
-							MX51_PAD_KEY_COL1__KEY_COL1 0xe8
-							MX51_PAD_KEY_COL2__KEY_COL2 0xe8
-							MX51_PAD_KEY_COL3__KEY_COL3 0xe8
-						>;
-					};
-				};
 			};
 
 			pwm1: pwm@73fb4000 {
@@ -628,6 +372,21 @@
 			reg = <0x80000000 0x10000000>;
 			ranges;
 
+			iim: iim@83f98000 {
+				compatible = "fsl,imx51-iim", "fsl,imx27-iim";
+				reg = <0x83f98000 0x4000>;
+				interrupts = <69>;
+				clocks = <&clks 107>;
+			};
+
+			owire: owire@83fa4000 {
+				compatible = "fsl,imx51-owire", "fsl,imx21-owire";
+				reg = <0x83fa4000 0x4000>;
+				interrupts = <88>;
+				clocks = <&clks 159>;
+				status = "disabled";
+			};
+
 			ecspi2: ecspi@83fac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -645,6 +404,7 @@
 				interrupts = <6>;
 				clocks = <&clks 56>, <&clks 56>;
 				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
 			};
 
@@ -684,6 +444,9 @@
 				reg = <0x83fcc000 0x4000>;
 				interrupts = <29>;
 				clocks = <&clks 48>;
+				dmas = <&sdma 28 0 0>,
+				       <&sdma 29 0 0>;
+				dma-names = "rx", "tx";
 				fsl,fifo-depth = <15>;
 				fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
 				status = "disabled";
@@ -695,6 +458,23 @@
 				status = "disabled";
 			};
 
+			weim: weim@83fda000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				compatible = "fsl,imx51-weim";
+				reg = <0x83fda000 0x1000>;
+				clocks = <&clks 57>;
+				ranges = <
+					0 0 0xb0000000 0x08000000
+					1 0 0xb8000000 0x08000000
+					2 0 0xc0000000 0x08000000
+					3 0 0xc8000000 0x04000000
+					4 0 0xcc000000 0x02000000
+					5 0 0xce000000 0x02000000
+				>;
+				status = "disabled";
+			};
+
 			nfc: nand@83fdb000 {
 				compatible = "fsl,imx51-nand";
 				reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
@@ -707,7 +487,7 @@
 				compatible = "fsl,imx51-pata", "fsl,imx27-pata";
 				reg = <0x83fe0000 0x4000>;
 				interrupts = <70>;
-				clocks = <&clks 161>;
+				clocks = <&clks 172>;
 				status = "disabled";
 			};
 
@@ -716,6 +496,9 @@
 				reg = <0x83fe8000 0x4000>;
 				interrupts = <96>;
 				clocks = <&clks 50>;
+				dmas = <&sdma 46 0 0>,
+				       <&sdma 47 0 0>;
+				dma-names = "rx", "tx";
 				fsl,fifo-depth = <15>;
 				fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */
 				status = "disabled";
@@ -732,3 +515,329 @@
 		};
 	};
 };
+
+&iomuxc {
+	audmux {
+		pinctrl_audmux_1: audmuxgrp-1 {
+			fsl,pins = <
+				MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000
+				MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000
+				MX51_PAD_AUD3_BB_CK__AUD3_TXC  0x80000000
+				MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000
+			>;
+		};
+	};
+
+	fec {
+		pinctrl_fec_1: fecgrp-1 {
+			fsl,pins = <
+				MX51_PAD_EIM_EB2__FEC_MDIO	   0x80000000
+				MX51_PAD_EIM_EB3__FEC_RDATA1	   0x80000000
+				MX51_PAD_EIM_CS2__FEC_RDATA2	   0x80000000
+				MX51_PAD_EIM_CS3__FEC_RDATA3	   0x80000000
+				MX51_PAD_EIM_CS4__FEC_RX_ER	   0x80000000
+				MX51_PAD_EIM_CS5__FEC_CRS	   0x80000000
+				MX51_PAD_NANDF_RB2__FEC_COL	   0x80000000
+				MX51_PAD_NANDF_RB3__FEC_RX_CLK	   0x80000000
+				MX51_PAD_NANDF_D9__FEC_RDATA0	   0x80000000
+				MX51_PAD_NANDF_D8__FEC_TDATA0	   0x80000000
+				MX51_PAD_NANDF_CS2__FEC_TX_ER	   0x80000000
+				MX51_PAD_NANDF_CS3__FEC_MDC	   0x80000000
+				MX51_PAD_NANDF_CS4__FEC_TDATA1	   0x80000000
+				MX51_PAD_NANDF_CS5__FEC_TDATA2	   0x80000000
+				MX51_PAD_NANDF_CS6__FEC_TDATA3	   0x80000000
+				MX51_PAD_NANDF_CS7__FEC_TX_EN	   0x80000000
+				MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x80000000
+			>;
+		};
+
+		pinctrl_fec_2: fecgrp-2 {
+			fsl,pins = <
+				MX51_PAD_DI_GP3__FEC_TX_ER	  0x80000000
+				MX51_PAD_DI2_PIN4__FEC_CRS	  0x80000000
+				MX51_PAD_DI2_PIN2__FEC_MDC	  0x80000000
+				MX51_PAD_DI2_PIN3__FEC_MDIO	  0x80000000
+				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000
+				MX51_PAD_DI_GP4__FEC_RDATA2	  0x80000000
+				MX51_PAD_DISP2_DAT0__FEC_RDATA3   0x80000000
+				MX51_PAD_DISP2_DAT1__FEC_RX_ER	  0x80000000
+				MX51_PAD_DISP2_DAT6__FEC_TDATA1	  0x80000000
+				MX51_PAD_DISP2_DAT7__FEC_TDATA2	  0x80000000
+				MX51_PAD_DISP2_DAT8__FEC_TDATA3	  0x80000000
+				MX51_PAD_DISP2_DAT9__FEC_TX_EN	  0x80000000
+				MX51_PAD_DISP2_DAT10__FEC_COL	  0x80000000
+				MX51_PAD_DISP2_DAT11__FEC_RX_CLK  0x80000000
+				MX51_PAD_DISP2_DAT12__FEC_RX_DV	  0x80000000
+				MX51_PAD_DISP2_DAT13__FEC_TX_CLK  0x80000000
+				MX51_PAD_DISP2_DAT14__FEC_RDATA0  0x80000000
+				MX51_PAD_DISP2_DAT15__FEC_TDATA0  0x80000000
+			>;
+		};
+	};
+
+	ecspi1 {
+		pinctrl_ecspi1_1: ecspi1grp-1 {
+			fsl,pins = <
+				MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
+				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
+				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
+			>;
+		};
+	};
+
+	ecspi2 {
+		pinctrl_ecspi2_1: ecspi2grp-1 {
+			fsl,pins = <
+				MX51_PAD_NANDF_RB3__ECSPI2_MISO 0x185
+				MX51_PAD_NANDF_D15__ECSPI2_MOSI 0x185
+				MX51_PAD_NANDF_RB2__ECSPI2_SCLK 0x185
+			>;
+		};
+	};
+
+	esdhc1 {
+		pinctrl_esdhc1_1: esdhc1grp-1 {
+			fsl,pins = <
+				MX51_PAD_SD1_CMD__SD1_CMD     0x400020d5
+				MX51_PAD_SD1_CLK__SD1_CLK     0x20d5
+				MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
+				MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
+				MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
+				MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
+			>;
+		};
+	};
+
+	esdhc2 {
+		pinctrl_esdhc2_1: esdhc2grp-1 {
+			fsl,pins = <
+				MX51_PAD_SD2_CMD__SD2_CMD     0x400020d5
+				MX51_PAD_SD2_CLK__SD2_CLK     0x20d5
+				MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5
+				MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5
+				MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5
+				MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5
+			>;
+		};
+	};
+
+	i2c2 {
+		pinctrl_i2c2_1: i2c2grp-1 {
+			fsl,pins = <
+				MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed
+				MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed
+			>;
+		};
+
+		pinctrl_i2c2_2: i2c2grp-2 {
+			fsl,pins = <
+				MX51_PAD_EIM_D27__I2C2_SCL 0x400001ed
+				MX51_PAD_EIM_D24__I2C2_SDA 0x400001ed
+			>;
+		};
+
+		pinctrl_i2c2_3: i2c2grp-3 {
+			fsl,pins = <
+				MX51_PAD_GPIO1_2__I2C2_SCL 0x400001ed
+				MX51_PAD_GPIO1_3__I2C2_SDA 0x400001ed
+			>;
+		};
+	};
+
+	ipu_disp1 {
+		pinctrl_ipu_disp1_1: ipudisp1grp-1 {
+			fsl,pins = <
+				MX51_PAD_DISP1_DAT0__DISP1_DAT0	  0x5
+				MX51_PAD_DISP1_DAT1__DISP1_DAT1	  0x5
+				MX51_PAD_DISP1_DAT2__DISP1_DAT2	  0x5
+				MX51_PAD_DISP1_DAT3__DISP1_DAT3	  0x5
+				MX51_PAD_DISP1_DAT4__DISP1_DAT4	  0x5
+				MX51_PAD_DISP1_DAT5__DISP1_DAT5	  0x5
+				MX51_PAD_DISP1_DAT6__DISP1_DAT6	  0x5
+				MX51_PAD_DISP1_DAT7__DISP1_DAT7	  0x5
+				MX51_PAD_DISP1_DAT8__DISP1_DAT8	  0x5
+				MX51_PAD_DISP1_DAT9__DISP1_DAT9	  0x5
+				MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5
+				MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5
+				MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5
+				MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5
+				MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5
+				MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5
+				MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5
+				MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5
+				MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5
+				MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5
+				MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5
+				MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5
+				MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5
+				MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5
+				MX51_PAD_DI1_PIN2__DI1_PIN2	  0x5 /* hsync */
+				MX51_PAD_DI1_PIN3__DI1_PIN3	  0x5 /* vsync */
+			>;
+		};
+	};
+
+	ipu_disp2 {
+		pinctrl_ipu_disp2_1: ipudisp2grp-1 {
+			fsl,pins = <
+				MX51_PAD_DISP2_DAT0__DISP2_DAT0	    0x5
+				MX51_PAD_DISP2_DAT1__DISP2_DAT1	    0x5
+				MX51_PAD_DISP2_DAT2__DISP2_DAT2	    0x5
+				MX51_PAD_DISP2_DAT3__DISP2_DAT3	    0x5
+				MX51_PAD_DISP2_DAT4__DISP2_DAT4	    0x5
+				MX51_PAD_DISP2_DAT5__DISP2_DAT5	    0x5
+				MX51_PAD_DISP2_DAT6__DISP2_DAT6	    0x5
+				MX51_PAD_DISP2_DAT7__DISP2_DAT7	    0x5
+				MX51_PAD_DISP2_DAT8__DISP2_DAT8	    0x5
+				MX51_PAD_DISP2_DAT9__DISP2_DAT9	    0x5
+				MX51_PAD_DISP2_DAT10__DISP2_DAT10   0x5
+				MX51_PAD_DISP2_DAT11__DISP2_DAT11   0x5
+				MX51_PAD_DISP2_DAT12__DISP2_DAT12   0x5
+				MX51_PAD_DISP2_DAT13__DISP2_DAT13   0x5
+				MX51_PAD_DISP2_DAT14__DISP2_DAT14   0x5
+				MX51_PAD_DISP2_DAT15__DISP2_DAT15   0x5
+				MX51_PAD_DI2_PIN2__DI2_PIN2	    0x5 /* hsync */
+				MX51_PAD_DI2_PIN3__DI2_PIN3	    0x5 /* vsync */
+				MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5 /* CLK */
+				MX51_PAD_DI_GP4__DI2_PIN15	    0x5 /* DE */
+			>;
+		};
+	};
+
+	kpp {
+		pinctrl_kpp_1: kppgrp-1 {
+			fsl,pins = <
+				MX51_PAD_KEY_ROW0__KEY_ROW0 0xe0
+				MX51_PAD_KEY_ROW1__KEY_ROW1 0xe0
+				MX51_PAD_KEY_ROW2__KEY_ROW2 0xe0
+				MX51_PAD_KEY_ROW3__KEY_ROW3 0xe0
+				MX51_PAD_KEY_COL0__KEY_COL0 0xe8
+				MX51_PAD_KEY_COL1__KEY_COL1 0xe8
+				MX51_PAD_KEY_COL2__KEY_COL2 0xe8
+				MX51_PAD_KEY_COL3__KEY_COL3 0xe8
+			>;
+		};
+	};
+
+	pata {
+		pinctrl_pata_1: patagrp-1 {
+			fsl,pins = <
+				MX51_PAD_NANDF_WE_B__PATA_DIOW	   0x2004
+				MX51_PAD_NANDF_RE_B__PATA_DIOR	   0x2004
+				MX51_PAD_NANDF_ALE__PATA_BUFFER_EN 0x2004
+				MX51_PAD_NANDF_CLE__PATA_RESET_B   0x2004
+				MX51_PAD_NANDF_WP_B__PATA_DMACK	   0x2004
+				MX51_PAD_NANDF_RB0__PATA_DMARQ	   0x2004
+				MX51_PAD_NANDF_RB1__PATA_IORDY	   0x2004
+				MX51_PAD_GPIO_NAND__PATA_INTRQ	   0x2004
+				MX51_PAD_NANDF_CS2__PATA_CS_0	   0x2004
+				MX51_PAD_NANDF_CS3__PATA_CS_1	   0x2004
+				MX51_PAD_NANDF_CS4__PATA_DA_0	   0x2004
+				MX51_PAD_NANDF_CS5__PATA_DA_1	   0x2004
+				MX51_PAD_NANDF_CS6__PATA_DA_2	   0x2004
+				MX51_PAD_NANDF_D15__PATA_DATA15	   0x2004
+				MX51_PAD_NANDF_D14__PATA_DATA14	   0x2004
+				MX51_PAD_NANDF_D13__PATA_DATA13	   0x2004
+				MX51_PAD_NANDF_D12__PATA_DATA12	   0x2004
+				MX51_PAD_NANDF_D11__PATA_DATA11	   0x2004
+				MX51_PAD_NANDF_D10__PATA_DATA10	   0x2004
+				MX51_PAD_NANDF_D9__PATA_DATA9	   0x2004
+				MX51_PAD_NANDF_D8__PATA_DATA8	   0x2004
+				MX51_PAD_NANDF_D7__PATA_DATA7	   0x2004
+				MX51_PAD_NANDF_D6__PATA_DATA6	  0x2004
+				MX51_PAD_NANDF_D5__PATA_DATA5	  0x2004
+				MX51_PAD_NANDF_D4__PATA_DATA4	  0x2004
+				MX51_PAD_NANDF_D3__PATA_DATA3	  0x2004
+				MX51_PAD_NANDF_D2__PATA_DATA2	  0x2004
+				MX51_PAD_NANDF_D1__PATA_DATA1	  0x2004
+				MX51_PAD_NANDF_D0__PATA_DATA0	  0x2004
+			>;
+		};
+	};
+
+	uart1 {
+		pinctrl_uart1_1: uart1grp-1 {
+			fsl,pins = <
+				MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
+				MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
+			>;
+		};
+
+		pinctrl_uart1_rtscts_1: uart1rtscts-1 {
+			fsl,pins = <
+				MX51_PAD_UART1_RTS__UART1_RTS 0x1c5
+				MX51_PAD_UART1_CTS__UART1_CTS 0x1c5
+			>;
+		};
+	};
+
+	uart2 {
+		pinctrl_uart2_1: uart2grp-1 {
+			fsl,pins = <
+				MX51_PAD_UART2_RXD__UART2_RXD 0x1c5
+				MX51_PAD_UART2_TXD__UART2_TXD 0x1c5
+			>;
+		};
+	};
+
+	uart3 {
+		pinctrl_uart3_1: uart3grp-1 {
+			fsl,pins = <
+				MX51_PAD_EIM_D25__UART3_RXD 0x1c5
+				MX51_PAD_EIM_D26__UART3_TXD 0x1c5
+			>;
+		};
+
+		pinctrl_uart3_rtscts_1: uart3rtscts-1 {
+			fsl,pins = <
+				MX51_PAD_EIM_D27__UART3_RTS 0x1c5
+				MX51_PAD_EIM_D24__UART3_CTS 0x1c5
+			>;
+		};
+
+		pinctrl_uart3_2: uart3grp-2 {
+			fsl,pins = <
+				MX51_PAD_UART3_RXD__UART3_RXD 0x1c5
+				MX51_PAD_UART3_TXD__UART3_TXD 0x1c5
+			>;
+		};
+	};
+
+	usbh1 {
+		pinctrl_usbh1_1: usbh1grp-1 {
+			fsl,pins = <
+				MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5
+				MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5
+				MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5
+				MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5
+				MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5
+				MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5
+				MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5
+				MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5
+				MX51_PAD_USBH1_CLK__USBH1_CLK	  0x1e5
+				MX51_PAD_USBH1_DIR__USBH1_DIR	  0x1e5
+				MX51_PAD_USBH1_NXT__USBH1_NXT	  0x1e5
+				MX51_PAD_USBH1_STP__USBH1_STP	  0x1e5
+			>;
+		};
+	};
+
+	usbh2 {
+		pinctrl_usbh2_1: usbh2grp-1 {
+			fsl,pins = <
+				MX51_PAD_EIM_D16__USBH2_DATA0 0x1e5
+				MX51_PAD_EIM_D17__USBH2_DATA1 0x1e5
+				MX51_PAD_EIM_D18__USBH2_DATA2 0x1e5
+				MX51_PAD_EIM_D19__USBH2_DATA3 0x1e5
+				MX51_PAD_EIM_D20__USBH2_DATA4 0x1e5
+				MX51_PAD_EIM_D21__USBH2_DATA5 0x1e5
+				MX51_PAD_EIM_D22__USBH2_DATA6 0x1e5
+				MX51_PAD_EIM_D23__USBH2_DATA7 0x1e5
+				MX51_PAD_EIM_A24__USBH2_CLK   0x1e5
+				MX51_PAD_EIM_A25__USBH2_DIR   0x1e5
+				MX51_PAD_EIM_A27__USBH2_NXT   0x1e5
+				MX51_PAD_EIM_A26__USBH2_STP   0x1e5
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index 512a1f6..91a5935 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -55,19 +55,20 @@
 			label = "Power Button";
 			gpios = <&gpio1 8 0>;
 			linux,code = <116>; /* KEY_POWER */
-			gpio-key,wakeup;
 		};
 
 		volume-up {
 			label = "Volume Up";
 			gpios = <&gpio2 14 0>;
 			linux,code = <115>; /* KEY_VOLUMEUP */
+			gpio-key,wakeup;
 		};
 
 		volume-down {
 			label = "Volume Down";
 			gpios = <&gpio2 15 0>;
 			linux,code = <114>; /* KEY_VOLUMEDOWN */
+			gpio-key,wakeup;
 		};
 	};
 
@@ -93,6 +94,15 @@
 			regulator-max-microvolt = <3200000>;
 			regulator-always-on;
 		};
+
+		reg_usb_vbus: usb_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio7 8 0>;
+			enable-active-high;
+		};
 	};
 
 	sound {
@@ -113,7 +123,6 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1_1>;
-	cd-gpios = <&gpio3 13 0>;
 	status = "okay";
 };
 
@@ -127,6 +136,7 @@
 	pinctrl-0 = <&pinctrl_esdhc3_1>;
 	cd-gpios = <&gpio3 11 0>;
 	wp-gpios = <&gpio3 12 0>;
+	bus-width = <8>;
 	status = "okay";
 };
 
@@ -143,8 +153,8 @@
 				MX53_PAD_PATA_DATA15__GPIO2_15    0x80000000
 				MX53_PAD_EIM_DA11__GPIO3_11       0x80000000
 				MX53_PAD_EIM_DA12__GPIO3_12       0x80000000
-				MX53_PAD_EIM_DA13__GPIO3_13       0x80000000
 				MX53_PAD_PATA_DA_0__GPIO7_6       0x80000000
+				MX53_PAD_PATA_DA_2__GPIO7_8	  0x80000000
 				MX53_PAD_GPIO_16__GPIO7_11        0x80000000
 			>;
 		};
@@ -297,10 +307,17 @@
 	status = "okay";
 };
 
+&vpu {
+	status = "okay";
+};
+
 &usbh1 {
-       status = "okay";
+	vbus-supply = <&reg_usb_vbus>;
+	phy_type = "utmi";
+	status = "okay";
 };
 
 &usbotg {
-       status = "okay";
+	dr_mode = "peripheral";
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 569aa9f..4307e80 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -15,11 +15,6 @@
 
 / {
 	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
@@ -30,6 +25,24 @@
 		i2c0 = &i2c1;
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &cspi;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+		};
 	};
 
 	tzic: tz-interrupt-controller@0fffc000 {
@@ -140,6 +153,9 @@
 					reg = <0x50014000 0x4000>;
 					interrupts = <30>;
 					clocks = <&clks 49>;
+					dmas = <&sdma 24 1 0>,
+					       <&sdma 25 1 0>;
+					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
 					status = "disabled";
@@ -957,6 +973,13 @@
 			reg = <0x60000000 0x10000000>;
 			ranges;
 
+			iim: iim@63f98000 {
+				compatible = "fsl,imx53-iim", "fsl,imx27-iim";
+				reg = <0x63f98000 0x4000>;
+				interrupts = <69>;
+				clocks = <&clks 107>;
+			};
+
 			uart5: serial@63f90000 {
 				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 				reg = <0x63f90000 0x4000>;
@@ -990,6 +1013,7 @@
 				interrupts = <6>;
 				clocks = <&clks 56>, <&clks 56>;
 				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
 			};
 
@@ -1029,6 +1053,9 @@
 				reg = <0x63fcc000 0x4000>;
 				interrupts = <29>;
 				clocks = <&clks 48>;
+				dmas = <&sdma 28 0 0>,
+				       <&sdma 29 0 0>;
+				dma-names = "rx", "tx";
 				fsl,fifo-depth = <15>;
 				fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
 				status = "disabled";
@@ -1053,6 +1080,9 @@
 				reg = <0x63fe8000 0x4000>;
 				interrupts = <96>;
 				clocks = <&clks 50>;
+				dmas = <&sdma 46 0 0>,
+				       <&sdma 47 0 0>;
+				dma-names = "rx", "tx";
 				fsl,fifo-depth = <15>;
 				fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */
 				status = "disabled";
@@ -1076,6 +1106,22 @@
 				crtcs = <&ipu 1>;
 				status = "disabled";
 			};
+
+			vpu: vpu@63ff4000 {
+				compatible = "fsl,imx53-vpu";
+				reg = <0x63ff4000 0x1000>;
+				interrupts = <9>;
+				clocks = <&clks 63>, <&clks 63>;
+				clock-names = "per", "ahb";
+				iram = <&ocram>;
+				status = "disabled";
+			};
+		};
+
+		ocram: sram@f8000000 {
+			compatible = "mmio-sram";
+			reg = <0xf8000000 0x20000>;
+			clocks = <&clks 186>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6dl-pinfunc.h b/arch/arm/boot/dts/imx6dl-pinfunc.h
index 9aab950..b81a7a4e 100644
--- a/arch/arm/boot/dts/imx6dl-pinfunc.h
+++ b/arch/arm/boot/dts/imx6dl-pinfunc.h
@@ -14,1072 +14,1076 @@
  * The pin function ID is a tuple of
  * <mux_reg conf_reg input_reg mux_mode input_val>
  */
-#define MX6DL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10     0x04c 0x360 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT10__AUD3_RXC             0x04c 0x360 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT10__ECSPI2_MISO          0x04c 0x360 0x7f8 0x2 0x0
-#define MX6DL_PAD_CSI0_DAT10__UART1_TX_DATA        0x04c 0x360 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT10__UART1_RX_DATA        0x04c 0x360 0x8fc 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT10__GPIO5_IO28           0x04c 0x360 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT10__ARM_TRACE07          0x04c 0x360 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11     0x050 0x364 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT11__AUD3_RXFS            0x050 0x364 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT11__ECSPI2_SS0           0x050 0x364 0x800 0x2 0x0
-#define MX6DL_PAD_CSI0_DAT11__UART1_RX_DATA        0x050 0x364 0x8fc 0x3 0x1
-#define MX6DL_PAD_CSI0_DAT11__UART1_TX_DATA        0x050 0x364 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT11__GPIO5_IO29           0x050 0x364 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT11__ARM_TRACE08          0x050 0x364 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12     0x054 0x368 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT12__EIM_DATA08           0x054 0x368 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT12__UART4_TX_DATA        0x054 0x368 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT12__UART4_RX_DATA        0x054 0x368 0x914 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT12__GPIO5_IO30           0x054 0x368 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT12__ARM_TRACE09          0x054 0x368 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13     0x058 0x36c 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT13__EIM_DATA09           0x058 0x36c 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT13__UART4_RX_DATA        0x058 0x36c 0x914 0x3 0x1
-#define MX6DL_PAD_CSI0_DAT13__UART4_TX_DATA        0x058 0x36c 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT13__GPIO5_IO31           0x058 0x36c 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT13__ARM_TRACE10          0x058 0x36c 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14     0x05c 0x370 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT14__EIM_DATA10           0x05c 0x370 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT14__UART5_TX_DATA        0x05c 0x370 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT14__UART5_RX_DATA        0x05c 0x370 0x91c 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT14__GPIO6_IO00           0x05c 0x370 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT14__ARM_TRACE11          0x05c 0x370 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15     0x060 0x374 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT15__EIM_DATA11           0x060 0x374 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT15__UART5_RX_DATA        0x060 0x374 0x91c 0x3 0x1
-#define MX6DL_PAD_CSI0_DAT15__UART5_TX_DATA        0x060 0x374 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT15__GPIO6_IO01           0x060 0x374 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT15__ARM_TRACE12          0x060 0x374 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16     0x064 0x378 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT16__EIM_DATA12           0x064 0x378 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT16__UART4_RTS_B          0x064 0x378 0x910 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT16__UART4_CTS_B          0x064 0x378 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT16__GPIO6_IO02           0x064 0x378 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT16__ARM_TRACE13          0x064 0x378 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17     0x068 0x37c 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT17__EIM_DATA13           0x068 0x37c 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT17__UART4_CTS_B          0x068 0x37c 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT17__UART4_RTS_B          0x068 0x37c 0x910 0x3 0x1
-#define MX6DL_PAD_CSI0_DAT17__GPIO6_IO03           0x068 0x37c 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT17__ARM_TRACE14          0x068 0x37c 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18     0x06c 0x380 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT18__EIM_DATA14           0x06c 0x380 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT18__UART5_RTS_B          0x06c 0x380 0x918 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT18__UART5_CTS_B          0x06c 0x380 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT18__GPIO6_IO04           0x06c 0x380 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT18__ARM_TRACE15          0x06c 0x380 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19     0x070 0x384 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT19__EIM_DATA15           0x070 0x384 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT19__UART5_CTS_B          0x070 0x384 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT19__UART5_RTS_B          0x070 0x384 0x918 0x3 0x1
-#define MX6DL_PAD_CSI0_DAT19__GPIO6_IO05           0x070 0x384 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04      0x074 0x388 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT4__EIM_DATA02            0x074 0x388 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT4__ECSPI1_SCLK           0x074 0x388 0x7d8 0x2 0x0
-#define MX6DL_PAD_CSI0_DAT4__KEY_COL5              0x074 0x388 0x8c0 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT4__AUD3_TXC              0x074 0x388 0x000 0x4 0x0
-#define MX6DL_PAD_CSI0_DAT4__GPIO5_IO22            0x074 0x388 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT4__ARM_TRACE01           0x074 0x388 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05      0x078 0x38c 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT5__EIM_DATA03            0x078 0x38c 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT5__ECSPI1_MOSI           0x078 0x38c 0x7e0 0x2 0x0
-#define MX6DL_PAD_CSI0_DAT5__KEY_ROW5              0x078 0x38c 0x8cc 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT5__AUD3_TXD              0x078 0x38c 0x000 0x4 0x0
-#define MX6DL_PAD_CSI0_DAT5__GPIO5_IO23            0x078 0x38c 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT5__ARM_TRACE02           0x078 0x38c 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06      0x07c 0x390 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT6__EIM_DATA04            0x07c 0x390 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT6__ECSPI1_MISO           0x07c 0x390 0x7dc 0x2 0x0
-#define MX6DL_PAD_CSI0_DAT6__KEY_COL6              0x07c 0x390 0x8c4 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT6__AUD3_TXFS             0x07c 0x390 0x000 0x4 0x0
-#define MX6DL_PAD_CSI0_DAT6__GPIO5_IO24            0x07c 0x390 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT6__ARM_TRACE03           0x07c 0x390 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07      0x080 0x394 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT7__EIM_DATA05            0x080 0x394 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT7__ECSPI1_SS0            0x080 0x394 0x7e4 0x2 0x0
-#define MX6DL_PAD_CSI0_DAT7__KEY_ROW6              0x080 0x394 0x8d0 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT7__AUD3_RXD              0x080 0x394 0x000 0x4 0x0
-#define MX6DL_PAD_CSI0_DAT7__GPIO5_IO25            0x080 0x394 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT7__ARM_TRACE04           0x080 0x394 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08      0x084 0x398 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT8__EIM_DATA06            0x084 0x398 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT8__ECSPI2_SCLK           0x084 0x398 0x7f4 0x2 0x0
-#define MX6DL_PAD_CSI0_DAT8__KEY_COL7              0x084 0x398 0x8c8 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT8__I2C1_SDA              0x084 0x398 0x86c 0x4 0x0
-#define MX6DL_PAD_CSI0_DAT8__GPIO5_IO26            0x084 0x398 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT8__ARM_TRACE05           0x084 0x398 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09      0x088 0x39c 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DAT9__EIM_DATA07            0x088 0x39c 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DAT9__ECSPI2_MOSI           0x088 0x39c 0x7fc 0x2 0x0
-#define MX6DL_PAD_CSI0_DAT9__KEY_ROW7              0x088 0x39c 0x8d4 0x3 0x0
-#define MX6DL_PAD_CSI0_DAT9__I2C1_SCL              0x088 0x39c 0x868 0x4 0x0
-#define MX6DL_PAD_CSI0_DAT9__GPIO5_IO27            0x088 0x39c 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DAT9__ARM_TRACE06           0x088 0x39c 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN  0x08c 0x3a0 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_DATA_EN__EIM_DATA00         0x08c 0x3a0 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_DATA_EN__GPIO5_IO20         0x08c 0x3a0 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK      0x08c 0x3a0 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC       0x090 0x3a4 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_MCLK__CCM_CLKO1             0x090 0x3a4 0x000 0x3 0x0
-#define MX6DL_PAD_CSI0_MCLK__GPIO5_IO19            0x090 0x3a4 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_MCLK__ARM_TRACE_CTL         0x090 0x3a4 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK    0x094 0x3a8 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_PIXCLK__GPIO5_IO18          0x094 0x3a8 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_PIXCLK__ARM_EVENTO          0x094 0x3a8 0x000 0x7 0x0
-#define MX6DL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC      0x098 0x3ac 0x000 0x0 0x0
-#define MX6DL_PAD_CSI0_VSYNC__EIM_DATA01           0x098 0x3ac 0x000 0x1 0x0
-#define MX6DL_PAD_CSI0_VSYNC__GPIO5_IO21           0x098 0x3ac 0x000 0x5 0x0
-#define MX6DL_PAD_CSI0_VSYNC__ARM_TRACE00          0x098 0x3ac 0x000 0x7 0x0
-#define MX6DL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK  0x09c 0x3b0 0x000 0x0 0x0
-#define MX6DL_PAD_DI0_DISP_CLK__LCD_CLK            0x09c 0x3b0 0x000 0x1 0x0
-#define MX6DL_PAD_DI0_DISP_CLK__GPIO4_IO16         0x09c 0x3b0 0x000 0x5 0x0
-#define MX6DL_PAD_DI0_DISP_CLK__LCD_WR_RWN         0x09c 0x3b0 0x000 0x8 0x0
-#define MX6DL_PAD_DI0_PIN15__IPU1_DI0_PIN15        0x0a0 0x3b4 0x000 0x0 0x0
-#define MX6DL_PAD_DI0_PIN15__LCD_ENABLE            0x0a0 0x3b4 0x000 0x1 0x0
-#define MX6DL_PAD_DI0_PIN15__AUD6_TXC              0x0a0 0x3b4 0x000 0x2 0x0
-#define MX6DL_PAD_DI0_PIN15__GPIO4_IO17            0x0a0 0x3b4 0x000 0x5 0x0
-#define MX6DL_PAD_DI0_PIN15__LCD_RD_E              0x0a0 0x3b4 0x000 0x8 0x0
-#define MX6DL_PAD_DI0_PIN2__IPU1_DI0_PIN02         0x0a4 0x3b8 0x000 0x0 0x0
-#define MX6DL_PAD_DI0_PIN2__LCD_HSYNC              0x0a4 0x3b8 0x8d8 0x1 0x0
-#define MX6DL_PAD_DI0_PIN2__AUD6_TXD               0x0a4 0x3b8 0x000 0x2 0x0
-#define MX6DL_PAD_DI0_PIN2__GPIO4_IO18             0x0a4 0x3b8 0x000 0x5 0x0
-#define MX6DL_PAD_DI0_PIN2__LCD_RS                 0x0a4 0x3b8 0x000 0x8 0x0
-#define MX6DL_PAD_DI0_PIN3__IPU1_DI0_PIN03         0x0a8 0x3bc 0x000 0x0 0x0
-#define MX6DL_PAD_DI0_PIN3__LCD_VSYNC              0x0a8 0x3bc 0x000 0x1 0x0
-#define MX6DL_PAD_DI0_PIN3__AUD6_TXFS              0x0a8 0x3bc 0x000 0x2 0x0
-#define MX6DL_PAD_DI0_PIN3__GPIO4_IO19             0x0a8 0x3bc 0x000 0x5 0x0
-#define MX6DL_PAD_DI0_PIN3__LCD_CS                 0x0a8 0x3bc 0x000 0x8 0x0
-#define MX6DL_PAD_DI0_PIN4__IPU1_DI0_PIN04         0x0ac 0x3c0 0x000 0x0 0x0
-#define MX6DL_PAD_DI0_PIN4__LCD_BUSY               0x0ac 0x3c0 0x8d8 0x1 0x1
-#define MX6DL_PAD_DI0_PIN4__AUD6_RXD               0x0ac 0x3c0 0x000 0x2 0x0
-#define MX6DL_PAD_DI0_PIN4__SD1_WP                 0x0ac 0x3c0 0x92c 0x3 0x0
-#define MX6DL_PAD_DI0_PIN4__GPIO4_IO20             0x0ac 0x3c0 0x000 0x5 0x0
-#define MX6DL_PAD_DI0_PIN4__LCD_RESET              0x0ac 0x3c0 0x000 0x8 0x0
-#define MX6DL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00    0x0b0 0x3c4 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT0__LCD_DATA00           0x0b0 0x3c4 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT0__ECSPI3_SCLK          0x0b0 0x3c4 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT0__GPIO4_IO21           0x0b0 0x3c4 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01    0x0b4 0x3c8 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT1__LCD_DATA01           0x0b4 0x3c8 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT1__ECSPI3_MOSI          0x0b4 0x3c8 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT1__GPIO4_IO22           0x0b4 0x3c8 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10   0x0b8 0x3cc 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT10__LCD_DATA10          0x0b8 0x3cc 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT10__GPIO4_IO31          0x0b8 0x3cc 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11   0x0bc 0x3d0 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT11__LCD_DATA11          0x0bc 0x3d0 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT11__GPIO5_IO05          0x0bc 0x3d0 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12   0x0c0 0x3d4 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT12__LCD_DATA12          0x0c0 0x3d4 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT12__GPIO5_IO06          0x0c0 0x3d4 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13   0x0c4 0x3d8 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT13__LCD_DATA13          0x0c4 0x3d8 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT13__AUD5_RXFS           0x0c4 0x3d8 0x7bc 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT13__GPIO5_IO07          0x0c4 0x3d8 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14   0x0c8 0x3dc 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT14__LCD_DATA14          0x0c8 0x3dc 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT14__AUD5_RXC            0x0c8 0x3dc 0x7b8 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT14__GPIO5_IO08          0x0c8 0x3dc 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15   0x0cc 0x3e0 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT15__LCD_DATA15          0x0cc 0x3e0 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT15__ECSPI1_SS1          0x0cc 0x3e0 0x7e8 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT15__ECSPI2_SS1          0x0cc 0x3e0 0x804 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT15__GPIO5_IO09          0x0cc 0x3e0 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16   0x0d0 0x3e4 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT16__LCD_DATA16          0x0d0 0x3e4 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT16__ECSPI2_MOSI         0x0d0 0x3e4 0x7fc 0x2 0x1
-#define MX6DL_PAD_DISP0_DAT16__AUD5_TXC            0x0d0 0x3e4 0x7c0 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0     0x0d0 0x3e4 0x8e8 0x4 0x0
-#define MX6DL_PAD_DISP0_DAT16__GPIO5_IO10          0x0d0 0x3e4 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17   0x0d4 0x3e8 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT17__LCD_DATA17          0x0d4 0x3e8 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT17__ECSPI2_MISO         0x0d4 0x3e8 0x7f8 0x2 0x1
-#define MX6DL_PAD_DISP0_DAT17__AUD5_TXD            0x0d4 0x3e8 0x7b4 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1     0x0d4 0x3e8 0x8ec 0x4 0x0
-#define MX6DL_PAD_DISP0_DAT17__GPIO5_IO11          0x0d4 0x3e8 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18   0x0d8 0x3ec 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT18__LCD_DATA18          0x0d8 0x3ec 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT18__ECSPI2_SS0          0x0d8 0x3ec 0x800 0x2 0x1
-#define MX6DL_PAD_DISP0_DAT18__AUD5_TXFS           0x0d8 0x3ec 0x7c4 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT18__AUD4_RXFS           0x0d8 0x3ec 0x7a4 0x4 0x0
-#define MX6DL_PAD_DISP0_DAT18__GPIO5_IO12          0x0d8 0x3ec 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT18__EIM_CS2_B           0x0d8 0x3ec 0x000 0x7 0x0
-#define MX6DL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19   0x0dc 0x3f0 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT19__LCD_DATA19          0x0dc 0x3f0 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT19__ECSPI2_SCLK         0x0dc 0x3f0 0x7f4 0x2 0x1
-#define MX6DL_PAD_DISP0_DAT19__AUD5_RXD            0x0dc 0x3f0 0x7b0 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT19__AUD4_RXC            0x0dc 0x3f0 0x7a0 0x4 0x0
-#define MX6DL_PAD_DISP0_DAT19__GPIO5_IO13          0x0dc 0x3f0 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT19__EIM_CS3_B           0x0dc 0x3f0 0x000 0x7 0x0
-#define MX6DL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02    0x0e0 0x3f4 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT2__LCD_DATA02           0x0e0 0x3f4 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT2__ECSPI3_MISO          0x0e0 0x3f4 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT2__GPIO4_IO23           0x0e0 0x3f4 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20   0x0e4 0x3f8 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT20__LCD_DATA20          0x0e4 0x3f8 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT20__ECSPI1_SCLK         0x0e4 0x3f8 0x7d8 0x2 0x1
-#define MX6DL_PAD_DISP0_DAT20__AUD4_TXC            0x0e4 0x3f8 0x7a8 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT20__GPIO5_IO14          0x0e4 0x3f8 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21   0x0e8 0x3fc 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT21__LCD_DATA21          0x0e8 0x3fc 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT21__ECSPI1_MOSI         0x0e8 0x3fc 0x7e0 0x2 0x1
-#define MX6DL_PAD_DISP0_DAT21__AUD4_TXD            0x0e8 0x3fc 0x79c 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT21__GPIO5_IO15          0x0e8 0x3fc 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22   0x0ec 0x400 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT22__LCD_DATA22          0x0ec 0x400 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT22__ECSPI1_MISO         0x0ec 0x400 0x7dc 0x2 0x1
-#define MX6DL_PAD_DISP0_DAT22__AUD4_TXFS           0x0ec 0x400 0x7ac 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT22__GPIO5_IO16          0x0ec 0x400 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23   0x0f0 0x404 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT23__LCD_DATA23          0x0f0 0x404 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT23__ECSPI1_SS0          0x0f0 0x404 0x7e4 0x2 0x1
-#define MX6DL_PAD_DISP0_DAT23__AUD4_RXD            0x0f0 0x404 0x798 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT23__GPIO5_IO17          0x0f0 0x404 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03    0x0f4 0x408 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT3__LCD_DATA03           0x0f4 0x408 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT3__ECSPI3_SS0           0x0f4 0x408 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT3__GPIO4_IO24           0x0f4 0x408 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04    0x0f8 0x40c 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT4__LCD_DATA04           0x0f8 0x40c 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT4__ECSPI3_SS1           0x0f8 0x40c 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT4__GPIO4_IO25           0x0f8 0x40c 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05    0x0fc 0x410 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT5__LCD_DATA05           0x0fc 0x410 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT5__ECSPI3_SS2           0x0fc 0x410 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT5__AUD6_RXFS            0x0fc 0x410 0x000 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT5__GPIO4_IO26           0x0fc 0x410 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06    0x100 0x414 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT6__LCD_DATA06           0x100 0x414 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT6__ECSPI3_SS3           0x100 0x414 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT6__AUD6_RXC             0x100 0x414 0x000 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT6__GPIO4_IO27           0x100 0x414 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07    0x104 0x418 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT7__LCD_DATA07           0x104 0x418 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT7__ECSPI3_RDY           0x104 0x418 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT7__GPIO4_IO28           0x104 0x418 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08    0x108 0x41c 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT8__LCD_DATA08           0x108 0x41c 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT8__PWM1_OUT             0x108 0x41c 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT8__WDOG1_B              0x108 0x41c 0x000 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT8__GPIO4_IO29           0x108 0x41c 0x000 0x5 0x0
-#define MX6DL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09    0x10c 0x420 0x000 0x0 0x0
-#define MX6DL_PAD_DISP0_DAT9__LCD_DATA09           0x10c 0x420 0x000 0x1 0x0
-#define MX6DL_PAD_DISP0_DAT9__PWM2_OUT             0x10c 0x420 0x000 0x2 0x0
-#define MX6DL_PAD_DISP0_DAT9__WDOG2_B              0x10c 0x420 0x000 0x3 0x0
-#define MX6DL_PAD_DISP0_DAT9__GPIO4_IO30           0x10c 0x420 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A16__EIM_ADDR16              0x110 0x4e0 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A16__IPU1_DI1_DISP_CLK       0x110 0x4e0 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A16__IPU1_CSI1_PIXCLK        0x110 0x4e0 0x8b8 0x2 0x0
-#define MX6DL_PAD_EIM_A16__GPIO2_IO22              0x110 0x4e0 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A16__SRC_BOOT_CFG16          0x110 0x4e0 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_A16__EPDC_DATA00             0x110 0x4e0 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A17__EIM_ADDR17              0x114 0x4e4 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A17__IPU1_DISP1_DATA12       0x114 0x4e4 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A17__IPU1_CSI1_DATA12        0x114 0x4e4 0x890 0x2 0x0
-#define MX6DL_PAD_EIM_A17__GPIO2_IO21              0x114 0x4e4 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A17__SRC_BOOT_CFG17          0x114 0x4e4 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_A17__EPDC_PWR_STAT           0x114 0x4e4 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A18__EIM_ADDR18              0x118 0x4e8 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A18__IPU1_DISP1_DATA13       0x118 0x4e8 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A18__IPU1_CSI1_DATA13        0x118 0x4e8 0x894 0x2 0x0
-#define MX6DL_PAD_EIM_A18__GPIO2_IO20              0x118 0x4e8 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A18__SRC_BOOT_CFG18          0x118 0x4e8 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_A18__EPDC_PWR_CTRL0          0x118 0x4e8 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A19__EIM_ADDR19              0x11c 0x4ec 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A19__IPU1_DISP1_DATA14       0x11c 0x4ec 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A19__IPU1_CSI1_DATA14        0x11c 0x4ec 0x898 0x2 0x0
-#define MX6DL_PAD_EIM_A19__GPIO2_IO19              0x11c 0x4ec 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A19__SRC_BOOT_CFG19          0x11c 0x4ec 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_A19__EPDC_PWR_CTRL1          0x11c 0x4ec 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A20__EIM_ADDR20              0x120 0x4f0 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A20__IPU1_DISP1_DATA15       0x120 0x4f0 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A20__IPU1_CSI1_DATA15        0x120 0x4f0 0x89c 0x2 0x0
-#define MX6DL_PAD_EIM_A20__GPIO2_IO18              0x120 0x4f0 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A20__SRC_BOOT_CFG20          0x120 0x4f0 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_A20__EPDC_PWR_CTRL2          0x120 0x4f0 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A21__EIM_ADDR21              0x124 0x4f4 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A21__IPU1_DISP1_DATA16       0x124 0x4f4 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A21__IPU1_CSI1_DATA16        0x124 0x4f4 0x8a0 0x2 0x0
-#define MX6DL_PAD_EIM_A21__GPIO2_IO17              0x124 0x4f4 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A21__SRC_BOOT_CFG21          0x124 0x4f4 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_A21__EPDC_GDCLK              0x124 0x4f4 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A22__EIM_ADDR22              0x128 0x4f8 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A22__IPU1_DISP1_DATA17       0x128 0x4f8 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A22__IPU1_CSI1_DATA17        0x128 0x4f8 0x8a4 0x2 0x0
-#define MX6DL_PAD_EIM_A22__GPIO2_IO16              0x128 0x4f8 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A22__SRC_BOOT_CFG22          0x128 0x4f8 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_A22__EPDC_GDSP               0x128 0x4f8 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A23__EIM_ADDR23              0x12c 0x4fc 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A23__IPU1_DISP1_DATA18       0x12c 0x4fc 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A23__IPU1_CSI1_DATA18        0x12c 0x4fc 0x8a8 0x2 0x0
-#define MX6DL_PAD_EIM_A23__IPU1_SISG3              0x12c 0x4fc 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_A23__GPIO6_IO06              0x12c 0x4fc 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A23__SRC_BOOT_CFG23          0x12c 0x4fc 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_A23__EPDC_GDOE               0x12c 0x4fc 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A24__EIM_ADDR24              0x130 0x500 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A24__IPU1_DISP1_DATA19       0x130 0x500 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A24__IPU1_CSI1_DATA19        0x130 0x500 0x8ac 0x2 0x0
-#define MX6DL_PAD_EIM_A24__IPU1_SISG2              0x130 0x500 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_A24__GPIO5_IO04              0x130 0x500 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A24__SRC_BOOT_CFG24          0x130 0x500 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_A24__EPDC_GDRL               0x130 0x500 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A25__EIM_ADDR25              0x134 0x504 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_A25__ECSPI4_SS1              0x134 0x504 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_A25__ECSPI2_RDY              0x134 0x504 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_A25__IPU1_DI1_PIN12          0x134 0x504 0x000 0x3 0x0
-#define MX6DL_PAD_EIM_A25__IPU1_DI0_D1_CS          0x134 0x504 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_A25__GPIO5_IO02              0x134 0x504 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_A25__HDMI_TX_CEC_LINE        0x134 0x504 0x85c 0x6 0x0
-#define MX6DL_PAD_EIM_A25__EPDC_DATA15             0x134 0x504 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_A25__EIM_ACLK_FREERUN        0x134 0x504 0x000 0x9 0x0
-#define MX6DL_PAD_EIM_BCLK__EIM_BCLK               0x138 0x508 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_BCLK__IPU1_DI1_PIN16         0x138 0x508 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_BCLK__GPIO6_IO31             0x138 0x508 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_BCLK__EPDC_SDCE9             0x138 0x508 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_CS0__EIM_CS0_B               0x13c 0x50c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_CS0__IPU1_DI1_PIN05          0x13c 0x50c 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_CS0__ECSPI2_SCLK             0x13c 0x50c 0x7f4 0x2 0x2
-#define MX6DL_PAD_EIM_CS0__GPIO2_IO23              0x13c 0x50c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_CS0__EPDC_DATA06             0x13c 0x50c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_CS1__EIM_CS1_B               0x140 0x510 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_CS1__IPU1_DI1_PIN06          0x140 0x510 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_CS1__ECSPI2_MOSI             0x140 0x510 0x7fc 0x2 0x2
-#define MX6DL_PAD_EIM_CS1__GPIO2_IO24              0x140 0x510 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_CS1__EPDC_DATA08             0x140 0x510 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D16__EIM_DATA16              0x144 0x514 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D16__ECSPI1_SCLK             0x144 0x514 0x7d8 0x1 0x2
-#define MX6DL_PAD_EIM_D16__IPU1_DI0_PIN05          0x144 0x514 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D16__IPU1_CSI1_DATA18        0x144 0x514 0x8a8 0x3 0x1
-#define MX6DL_PAD_EIM_D16__HDMI_TX_DDC_SDA         0x144 0x514 0x864 0x4 0x0
-#define MX6DL_PAD_EIM_D16__GPIO3_IO16              0x144 0x514 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D16__I2C2_SDA                0x144 0x514 0x874 0x6 0x0
-#define MX6DL_PAD_EIM_D16__EPDC_DATA10             0x144 0x514 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D17__EIM_DATA17              0x148 0x518 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D17__ECSPI1_MISO             0x148 0x518 0x7dc 0x1 0x2
-#define MX6DL_PAD_EIM_D17__IPU1_DI0_PIN06          0x148 0x518 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D17__IPU1_CSI1_PIXCLK        0x148 0x518 0x8b8 0x3 0x1
-#define MX6DL_PAD_EIM_D17__DCIC1_OUT               0x148 0x518 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D17__GPIO3_IO17              0x148 0x518 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D17__I2C3_SCL                0x148 0x518 0x878 0x6 0x0
-#define MX6DL_PAD_EIM_D17__EPDC_VCOM0              0x148 0x518 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D18__EIM_DATA18              0x14c 0x51c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D18__ECSPI1_MOSI             0x14c 0x51c 0x7e0 0x1 0x2
-#define MX6DL_PAD_EIM_D18__IPU1_DI0_PIN07          0x14c 0x51c 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D18__IPU1_CSI1_DATA17        0x14c 0x51c 0x8a4 0x3 0x1
-#define MX6DL_PAD_EIM_D18__IPU1_DI1_D0_CS          0x14c 0x51c 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D18__GPIO3_IO18              0x14c 0x51c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D18__I2C3_SDA                0x14c 0x51c 0x87c 0x6 0x0
-#define MX6DL_PAD_EIM_D18__EPDC_VCOM1              0x14c 0x51c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D19__EIM_DATA19              0x150 0x520 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D19__ECSPI1_SS1              0x150 0x520 0x7e8 0x1 0x1
-#define MX6DL_PAD_EIM_D19__IPU1_DI0_PIN08          0x150 0x520 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D19__IPU1_CSI1_DATA16        0x150 0x520 0x8a0 0x3 0x1
-#define MX6DL_PAD_EIM_D19__UART1_CTS_B             0x150 0x520 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D19__UART1_RTS_B             0x150 0x520 0x8f8 0x4 0x0
-#define MX6DL_PAD_EIM_D19__GPIO3_IO19              0x150 0x520 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D19__EPIT1_OUT               0x150 0x520 0x000 0x6 0x0
-#define MX6DL_PAD_EIM_D19__EPDC_DATA12             0x150 0x520 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D20__EIM_DATA20              0x154 0x524 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D20__ECSPI4_SS0              0x154 0x524 0x808 0x1 0x0
-#define MX6DL_PAD_EIM_D20__IPU1_DI0_PIN16          0x154 0x524 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D20__IPU1_CSI1_DATA15        0x154 0x524 0x89c 0x3 0x1
-#define MX6DL_PAD_EIM_D20__UART1_RTS_B             0x154 0x524 0x8f8 0x4 0x1
-#define MX6DL_PAD_EIM_D20__UART1_CTS_B             0x154 0x524 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D20__GPIO3_IO20              0x154 0x524 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D20__EPIT2_OUT               0x154 0x524 0x000 0x6 0x0
-#define MX6DL_PAD_EIM_D21__EIM_DATA21              0x158 0x528 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D21__ECSPI4_SCLK             0x158 0x528 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D21__IPU1_DI0_PIN17          0x158 0x528 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D21__IPU1_CSI1_DATA11        0x158 0x528 0x88c 0x3 0x0
-#define MX6DL_PAD_EIM_D21__USB_OTG_OC              0x158 0x528 0x920 0x4 0x0
-#define MX6DL_PAD_EIM_D21__GPIO3_IO21              0x158 0x528 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D21__I2C1_SCL                0x158 0x528 0x868 0x6 0x1
-#define MX6DL_PAD_EIM_D21__SPDIF_IN                0x158 0x528 0x8f0 0x7 0x0
-#define MX6DL_PAD_EIM_D22__EIM_DATA22              0x15c 0x52c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D22__ECSPI4_MISO             0x15c 0x52c 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D22__IPU1_DI0_PIN01          0x15c 0x52c 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D22__IPU1_CSI1_DATA10        0x15c 0x52c 0x888 0x3 0x0
-#define MX6DL_PAD_EIM_D22__USB_OTG_PWR             0x15c 0x52c 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D22__GPIO3_IO22              0x15c 0x52c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D22__SPDIF_OUT               0x15c 0x52c 0x000 0x6 0x0
-#define MX6DL_PAD_EIM_D22__EPDC_SDCE6              0x15c 0x52c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D23__EIM_DATA23              0x160 0x530 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D23__IPU1_DI0_D0_CS          0x160 0x530 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D23__UART3_CTS_B             0x160 0x530 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D23__UART3_RTS_B             0x160 0x530 0x908 0x2 0x0
-#define MX6DL_PAD_EIM_D23__UART1_DCD_B             0x160 0x530 0x000 0x3 0x0
-#define MX6DL_PAD_EIM_D23__IPU1_CSI1_DATA_EN       0x160 0x530 0x8b0 0x4 0x0
-#define MX6DL_PAD_EIM_D23__GPIO3_IO23              0x160 0x530 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D23__IPU1_DI1_PIN02          0x160 0x530 0x000 0x6 0x0
-#define MX6DL_PAD_EIM_D23__IPU1_DI1_PIN14          0x160 0x530 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_D23__EPDC_DATA11             0x160 0x530 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D24__EIM_DATA24              0x164 0x534 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D24__ECSPI4_SS2              0x164 0x534 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D24__UART3_TX_DATA           0x164 0x534 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D24__UART3_RX_DATA           0x164 0x534 0x90c 0x2 0x0
-#define MX6DL_PAD_EIM_D24__ECSPI1_SS2              0x164 0x534 0x7ec 0x3 0x0
-#define MX6DL_PAD_EIM_D24__ECSPI2_SS2              0x164 0x534 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D24__GPIO3_IO24              0x164 0x534 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D24__AUD5_RXFS               0x164 0x534 0x7bc 0x6 0x1
-#define MX6DL_PAD_EIM_D24__UART1_DTR_B             0x164 0x534 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_D24__EPDC_SDCE7              0x164 0x534 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D25__EIM_DATA25              0x168 0x538 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D25__ECSPI4_SS3              0x168 0x538 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D25__UART3_RX_DATA           0x168 0x538 0x90c 0x2 0x1
-#define MX6DL_PAD_EIM_D25__UART3_TX_DATA           0x168 0x538 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D25__ECSPI1_SS3              0x168 0x538 0x7f0 0x3 0x0
-#define MX6DL_PAD_EIM_D25__ECSPI2_SS3              0x168 0x538 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D25__GPIO3_IO25              0x168 0x538 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D25__AUD5_RXC                0x168 0x538 0x7b8 0x6 0x1
-#define MX6DL_PAD_EIM_D25__UART1_DSR_B             0x168 0x538 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_D25__EPDC_SDCE8              0x168 0x538 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D26__EIM_DATA26              0x16c 0x53c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D26__IPU1_DI1_PIN11          0x16c 0x53c 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D26__IPU1_CSI0_DATA01        0x16c 0x53c 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D26__IPU1_CSI1_DATA14        0x16c 0x53c 0x898 0x3 0x1
-#define MX6DL_PAD_EIM_D26__UART2_TX_DATA           0x16c 0x53c 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D26__UART2_RX_DATA           0x16c 0x53c 0x904 0x4 0x0
-#define MX6DL_PAD_EIM_D26__GPIO3_IO26              0x16c 0x53c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D26__IPU1_SISG2              0x16c 0x53c 0x000 0x6 0x0
-#define MX6DL_PAD_EIM_D26__IPU1_DISP1_DATA22       0x16c 0x53c 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_D26__EPDC_SDOED              0x16c 0x53c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D27__EIM_DATA27              0x170 0x540 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D27__IPU1_DI1_PIN13          0x170 0x540 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D27__IPU1_CSI0_DATA00        0x170 0x540 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D27__IPU1_CSI1_DATA13        0x170 0x540 0x894 0x3 0x1
-#define MX6DL_PAD_EIM_D27__UART2_RX_DATA           0x170 0x540 0x904 0x4 0x1
-#define MX6DL_PAD_EIM_D27__UART2_TX_DATA           0x170 0x540 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D27__GPIO3_IO27              0x170 0x540 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D27__IPU1_SISG3              0x170 0x540 0x000 0x6 0x0
-#define MX6DL_PAD_EIM_D27__IPU1_DISP1_DATA23       0x170 0x540 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_D27__EPDC_SDOE               0x170 0x540 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D28__EIM_DATA28              0x174 0x544 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D28__I2C1_SDA                0x174 0x544 0x86c 0x1 0x1
-#define MX6DL_PAD_EIM_D28__ECSPI4_MOSI             0x174 0x544 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D28__IPU1_CSI1_DATA12        0x174 0x544 0x890 0x3 0x1
-#define MX6DL_PAD_EIM_D28__UART2_CTS_B             0x174 0x544 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D28__UART2_RTS_B             0x174 0x544 0x900 0x4 0x0
-#define MX6DL_PAD_EIM_D28__GPIO3_IO28              0x174 0x544 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D28__IPU1_EXT_TRIG           0x174 0x544 0x000 0x6 0x0
-#define MX6DL_PAD_EIM_D28__IPU1_DI0_PIN13          0x174 0x544 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_D28__EPDC_PWR_CTRL3          0x174 0x544 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D29__EIM_DATA29              0x178 0x548 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D29__IPU1_DI1_PIN15          0x178 0x548 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D29__ECSPI4_SS0              0x178 0x548 0x808 0x2 0x1
-#define MX6DL_PAD_EIM_D29__UART2_RTS_B             0x178 0x548 0x900 0x4 0x1
-#define MX6DL_PAD_EIM_D29__UART2_CTS_B             0x178 0x548 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D29__GPIO3_IO29              0x178 0x548 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D29__IPU1_CSI1_VSYNC         0x178 0x548 0x8bc 0x6 0x0
-#define MX6DL_PAD_EIM_D29__IPU1_DI0_PIN14          0x178 0x548 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_D29__EPDC_PWR_WAKE           0x178 0x548 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D30__EIM_DATA30              0x17c 0x54c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D30__IPU1_DISP1_DATA21       0x17c 0x54c 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D30__IPU1_DI0_PIN11          0x17c 0x54c 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D30__IPU1_CSI0_DATA03        0x17c 0x54c 0x000 0x3 0x0
-#define MX6DL_PAD_EIM_D30__UART3_CTS_B             0x17c 0x54c 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D30__UART3_RTS_B             0x17c 0x54c 0x908 0x4 0x1
-#define MX6DL_PAD_EIM_D30__GPIO3_IO30              0x17c 0x54c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D30__USB_H1_OC               0x17c 0x54c 0x924 0x6 0x0
-#define MX6DL_PAD_EIM_D30__EPDC_SDOEZ              0x17c 0x54c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D31__EIM_DATA31              0x180 0x550 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_D31__IPU1_DISP1_DATA20       0x180 0x550 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_D31__IPU1_DI0_PIN12          0x180 0x550 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_D31__IPU1_CSI0_DATA02        0x180 0x550 0x000 0x3 0x0
-#define MX6DL_PAD_EIM_D31__UART3_RTS_B             0x180 0x550 0x908 0x4 0x2
-#define MX6DL_PAD_EIM_D31__UART3_CTS_B             0x180 0x550 0x000 0x4 0x0
-#define MX6DL_PAD_EIM_D31__GPIO3_IO31              0x180 0x550 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_D31__USB_H1_PWR              0x180 0x550 0x000 0x6 0x0
-#define MX6DL_PAD_EIM_D31__EPDC_SDCLK_P            0x180 0x550 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_D31__EIM_ACLK_FREERUN        0x180 0x550 0x000 0x9 0x0
-#define MX6DL_PAD_EIM_DA0__EIM_AD00                0x184 0x554 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA0__IPU1_DISP1_DATA09       0x184 0x554 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA0__IPU1_CSI1_DATA09        0x184 0x554 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA0__GPIO3_IO00              0x184 0x554 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA0__SRC_BOOT_CFG00          0x184 0x554 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA0__EPDC_SDCLK_N            0x184 0x554 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA1__EIM_AD01                0x188 0x558 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA1__IPU1_DISP1_DATA08       0x188 0x558 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA1__IPU1_CSI1_DATA08        0x188 0x558 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA1__GPIO3_IO01              0x188 0x558 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA1__SRC_BOOT_CFG01          0x188 0x558 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA1__EPDC_SDLE               0x188 0x558 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA10__EIM_AD10               0x18c 0x55c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA10__IPU1_DI1_PIN15         0x18c 0x55c 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA10__IPU1_CSI1_DATA_EN      0x18c 0x55c 0x8b0 0x2 0x1
-#define MX6DL_PAD_EIM_DA10__GPIO3_IO10             0x18c 0x55c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA10__SRC_BOOT_CFG10         0x18c 0x55c 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA10__EPDC_DATA01            0x18c 0x55c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA11__EIM_AD11               0x190 0x560 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA11__IPU1_DI1_PIN02         0x190 0x560 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA11__IPU1_CSI1_HSYNC        0x190 0x560 0x8b4 0x2 0x0
-#define MX6DL_PAD_EIM_DA11__GPIO3_IO11             0x190 0x560 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA11__SRC_BOOT_CFG11         0x190 0x560 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA11__EPDC_DATA03            0x190 0x560 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA12__EIM_AD12               0x194 0x564 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA12__IPU1_DI1_PIN03         0x194 0x564 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA12__IPU1_CSI1_VSYNC        0x194 0x564 0x8bc 0x2 0x1
-#define MX6DL_PAD_EIM_DA12__GPIO3_IO12             0x194 0x564 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA12__SRC_BOOT_CFG12         0x194 0x564 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA12__EPDC_DATA02            0x194 0x564 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA13__EIM_AD13               0x198 0x568 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA13__IPU1_DI1_D0_CS         0x198 0x568 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA13__GPIO3_IO13             0x198 0x568 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA13__SRC_BOOT_CFG13         0x198 0x568 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA13__EPDC_DATA13            0x198 0x568 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA14__EIM_AD14               0x19c 0x56c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA14__IPU1_DI1_D1_CS         0x19c 0x56c 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA14__GPIO3_IO14             0x19c 0x56c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA14__SRC_BOOT_CFG14         0x19c 0x56c 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA14__EPDC_DATA14            0x19c 0x56c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA15__EIM_AD15               0x1a0 0x570 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA15__IPU1_DI1_PIN01         0x1a0 0x570 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA15__IPU1_DI1_PIN04         0x1a0 0x570 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA15__GPIO3_IO15             0x1a0 0x570 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA15__SRC_BOOT_CFG15         0x1a0 0x570 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA15__EPDC_DATA09            0x1a0 0x570 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA2__EIM_AD02                0x1a4 0x574 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA2__IPU1_DISP1_DATA07       0x1a4 0x574 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA2__IPU1_CSI1_DATA07        0x1a4 0x574 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA2__GPIO3_IO02              0x1a4 0x574 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA2__SRC_BOOT_CFG02          0x1a4 0x574 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA2__EPDC_BDR0               0x1a4 0x574 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA3__EIM_AD03                0x1a8 0x578 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA3__IPU1_DISP1_DATA06       0x1a8 0x578 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA3__IPU1_CSI1_DATA06        0x1a8 0x578 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA3__GPIO3_IO03              0x1a8 0x578 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA3__SRC_BOOT_CFG03          0x1a8 0x578 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA3__EPDC_BDR1               0x1a8 0x578 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA4__EIM_AD04                0x1ac 0x57c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA4__IPU1_DISP1_DATA05       0x1ac 0x57c 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA4__IPU1_CSI1_DATA05        0x1ac 0x57c 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA4__GPIO3_IO04              0x1ac 0x57c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA4__SRC_BOOT_CFG04          0x1ac 0x57c 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA4__EPDC_SDCE0              0x1ac 0x57c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA5__EIM_AD05                0x1b0 0x580 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA5__IPU1_DISP1_DATA04       0x1b0 0x580 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA5__IPU1_CSI1_DATA04        0x1b0 0x580 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA5__GPIO3_IO05              0x1b0 0x580 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA5__SRC_BOOT_CFG05          0x1b0 0x580 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA5__EPDC_SDCE1              0x1b0 0x580 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA6__EIM_AD06                0x1b4 0x584 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA6__IPU1_DISP1_DATA03       0x1b4 0x584 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA6__IPU1_CSI1_DATA03        0x1b4 0x584 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA6__GPIO3_IO06              0x1b4 0x584 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA6__SRC_BOOT_CFG06          0x1b4 0x584 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA6__EPDC_SDCE2              0x1b4 0x584 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA7__EIM_AD07                0x1b8 0x588 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA7__IPU1_DISP1_DATA02       0x1b8 0x588 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA7__IPU1_CSI1_DATA02        0x1b8 0x588 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA7__GPIO3_IO07              0x1b8 0x588 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA7__SRC_BOOT_CFG07          0x1b8 0x588 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA7__EPDC_SDCE3              0x1b8 0x588 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA8__EIM_AD08                0x1bc 0x58c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA8__IPU1_DISP1_DATA01       0x1bc 0x58c 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA8__IPU1_CSI1_DATA01        0x1bc 0x58c 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA8__GPIO3_IO08              0x1bc 0x58c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA8__SRC_BOOT_CFG08          0x1bc 0x58c 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA8__EPDC_SDCE4              0x1bc 0x58c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_DA9__EIM_AD09                0x1c0 0x590 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_DA9__IPU1_DISP1_DATA00       0x1c0 0x590 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_DA9__IPU1_CSI1_DATA00        0x1c0 0x590 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_DA9__GPIO3_IO09              0x1c0 0x590 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_DA9__SRC_BOOT_CFG09          0x1c0 0x590 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_DA9__EPDC_SDCE5              0x1c0 0x590 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_EB0__EIM_EB0_B               0x1c4 0x594 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_EB0__IPU1_DISP1_DATA11       0x1c4 0x594 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_EB0__IPU1_CSI1_DATA11        0x1c4 0x594 0x88c 0x2 0x1
-#define MX6DL_PAD_EIM_EB0__CCM_PMIC_READY          0x1c4 0x594 0x7d4 0x4 0x0
-#define MX6DL_PAD_EIM_EB0__GPIO2_IO28              0x1c4 0x594 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_EB0__SRC_BOOT_CFG27          0x1c4 0x594 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_EB0__EPDC_PWR_COM            0x1c4 0x594 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_EB1__EIM_EB1_B               0x1c8 0x598 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_EB1__IPU1_DISP1_DATA10       0x1c8 0x598 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_EB1__IPU1_CSI1_DATA10        0x1c8 0x598 0x888 0x2 0x1
-#define MX6DL_PAD_EIM_EB1__GPIO2_IO29              0x1c8 0x598 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_EB1__SRC_BOOT_CFG28          0x1c8 0x598 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_EB1__EPDC_SDSHR              0x1c8 0x598 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_EB2__EIM_EB2_B               0x1cc 0x59c 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_EB2__ECSPI1_SS0              0x1cc 0x59c 0x7e4 0x1 0x2
-#define MX6DL_PAD_EIM_EB2__IPU1_CSI1_DATA19        0x1cc 0x59c 0x8ac 0x3 0x1
-#define MX6DL_PAD_EIM_EB2__HDMI_TX_DDC_SCL         0x1cc 0x59c 0x860 0x4 0x0
-#define MX6DL_PAD_EIM_EB2__GPIO2_IO30              0x1cc 0x59c 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_EB2__I2C2_SCL                0x1cc 0x59c 0x870 0x6 0x0
-#define MX6DL_PAD_EIM_EB2__SRC_BOOT_CFG30          0x1cc 0x59c 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_EB2__EPDC_DATA05             0x1cc 0x59c 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_EB3__EIM_EB3_B               0x1d0 0x5a0 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_EB3__ECSPI4_RDY              0x1d0 0x5a0 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_EB3__UART3_RTS_B             0x1d0 0x5a0 0x908 0x2 0x3
-#define MX6DL_PAD_EIM_EB3__UART3_CTS_B             0x1d0 0x5a0 0x000 0x2 0x0
-#define MX6DL_PAD_EIM_EB3__UART1_RI_B              0x1d0 0x5a0 0x000 0x3 0x0
-#define MX6DL_PAD_EIM_EB3__IPU1_CSI1_HSYNC         0x1d0 0x5a0 0x8b4 0x4 0x1
-#define MX6DL_PAD_EIM_EB3__GPIO2_IO31              0x1d0 0x5a0 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_EB3__IPU1_DI1_PIN03          0x1d0 0x5a0 0x000 0x6 0x0
-#define MX6DL_PAD_EIM_EB3__SRC_BOOT_CFG31          0x1d0 0x5a0 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_EB3__EPDC_SDCE0              0x1d0 0x5a0 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_EB3__EIM_ACLK_FREERUN        0x1d0 0x5a0 0x000 0x9 0x0
-#define MX6DL_PAD_EIM_LBA__EIM_LBA_B               0x1d4 0x5a4 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_LBA__IPU1_DI1_PIN17          0x1d4 0x5a4 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_LBA__ECSPI2_SS1              0x1d4 0x5a4 0x804 0x2 0x1
-#define MX6DL_PAD_EIM_LBA__GPIO2_IO27              0x1d4 0x5a4 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_LBA__SRC_BOOT_CFG26          0x1d4 0x5a4 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_LBA__EPDC_DATA04             0x1d4 0x5a4 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_OE__EIM_OE_B                 0x1d8 0x5a8 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_OE__IPU1_DI1_PIN07           0x1d8 0x5a8 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_OE__ECSPI2_MISO              0x1d8 0x5a8 0x7f8 0x2 0x2
-#define MX6DL_PAD_EIM_OE__GPIO2_IO25               0x1d8 0x5a8 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_OE__EPDC_PWR_IRQ             0x1d8 0x5a8 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_RW__EIM_RW                   0x1dc 0x5ac 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_RW__IPU1_DI1_PIN08           0x1dc 0x5ac 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_RW__ECSPI2_SS0               0x1dc 0x5ac 0x800 0x2 0x2
-#define MX6DL_PAD_EIM_RW__GPIO2_IO26               0x1dc 0x5ac 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_RW__SRC_BOOT_CFG29           0x1dc 0x5ac 0x000 0x7 0x0
-#define MX6DL_PAD_EIM_RW__EPDC_DATA07              0x1dc 0x5ac 0x000 0x8 0x0
-#define MX6DL_PAD_EIM_WAIT__EIM_WAIT_B             0x1e0 0x5b0 0x000 0x0 0x0
-#define MX6DL_PAD_EIM_WAIT__EIM_DTACK_B            0x1e0 0x5b0 0x000 0x1 0x0
-#define MX6DL_PAD_EIM_WAIT__GPIO5_IO00             0x1e0 0x5b0 0x000 0x5 0x0
-#define MX6DL_PAD_EIM_WAIT__SRC_BOOT_CFG25         0x1e0 0x5b0 0x000 0x7 0x0
-#define MX6DL_PAD_ENET_CRS_DV__ENET_RX_EN          0x1e4 0x5b4 0x828 0x1 0x0
-#define MX6DL_PAD_ENET_CRS_DV__ESAI_TX_CLK         0x1e4 0x5b4 0x840 0x2 0x0
-#define MX6DL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK       0x1e4 0x5b4 0x8f4 0x3 0x0
-#define MX6DL_PAD_ENET_CRS_DV__GPIO1_IO25          0x1e4 0x5b4 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_MDC__MLB_DATA               0x1e8 0x5b8 0x8e0 0x0 0x0
-#define MX6DL_PAD_ENET_MDC__ENET_MDC               0x1e8 0x5b8 0x000 0x1 0x0
-#define MX6DL_PAD_ENET_MDC__ESAI_TX5_RX0           0x1e8 0x5b8 0x858 0x2 0x0
-#define MX6DL_PAD_ENET_MDC__ENET_1588_EVENT1_IN    0x1e8 0x5b8 0x000 0x4 0x0
-#define MX6DL_PAD_ENET_MDC__GPIO1_IO31             0x1e8 0x5b8 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_MDIO__ENET_MDIO             0x1ec 0x5bc 0x810 0x1 0x0
-#define MX6DL_PAD_ENET_MDIO__ESAI_RX_CLK           0x1ec 0x5bc 0x83c 0x2 0x0
-#define MX6DL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT  0x1ec 0x5bc 0x000 0x4 0x0
-#define MX6DL_PAD_ENET_MDIO__GPIO1_IO22            0x1ec 0x5bc 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_MDIO__SPDIF_LOCK            0x1ec 0x5bc 0x000 0x6 0x0
-#define MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK        0x1f0 0x5c0 0x000 0x1 0x0
-#define MX6DL_PAD_ENET_REF_CLK__ESAI_RX_FS         0x1f0 0x5c0 0x82c 0x2 0x0
-#define MX6DL_PAD_ENET_REF_CLK__GPIO1_IO23         0x1f0 0x5c0 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_REF_CLK__SPDIF_SR_CLK       0x1f0 0x5c0 0x000 0x6 0x0
-#define MX6DL_PAD_ENET_RX_ER__USB_OTG_ID           0x1f4 0x5c4 0x790 0x0 0x0
-#define MX6DL_PAD_ENET_RX_ER__ENET_RX_ER           0x1f4 0x5c4 0x000 0x1 0x0
-#define MX6DL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK       0x1f4 0x5c4 0x834 0x2 0x0
-#define MX6DL_PAD_ENET_RX_ER__SPDIF_IN             0x1f4 0x5c4 0x8f0 0x3 0x1
-#define MX6DL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1f4 0x5c4 0x000 0x4 0x0
-#define MX6DL_PAD_ENET_RX_ER__GPIO1_IO24           0x1f4 0x5c4 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_RXD0__ENET_RX_DATA0         0x1f8 0x5c8 0x818 0x1 0x0
-#define MX6DL_PAD_ENET_RXD0__ESAI_TX_HF_CLK        0x1f8 0x5c8 0x838 0x2 0x0
-#define MX6DL_PAD_ENET_RXD0__SPDIF_OUT             0x1f8 0x5c8 0x000 0x3 0x0
-#define MX6DL_PAD_ENET_RXD0__GPIO1_IO27            0x1f8 0x5c8 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_RXD1__MLB_SIG               0x1fc 0x5cc 0x8e4 0x0 0x0
-#define MX6DL_PAD_ENET_RXD1__ENET_RX_DATA1         0x1fc 0x5cc 0x81c 0x1 0x0
-#define MX6DL_PAD_ENET_RXD1__ESAI_TX_FS            0x1fc 0x5cc 0x830 0x2 0x0
-#define MX6DL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT  0x1fc 0x5cc 0x000 0x4 0x0
-#define MX6DL_PAD_ENET_RXD1__GPIO1_IO26            0x1fc 0x5cc 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_TX_EN__ENET_TX_EN           0x200 0x5d0 0x000 0x1 0x0
-#define MX6DL_PAD_ENET_TX_EN__ESAI_TX3_RX2         0x200 0x5d0 0x850 0x2 0x0
-#define MX6DL_PAD_ENET_TX_EN__GPIO1_IO28           0x200 0x5d0 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_TX_EN__I2C4_SCL             0x200 0x5d0 0x880 0x9 0x0
-#define MX6DL_PAD_ENET_TXD0__ENET_TX_DATA0         0x204 0x5d4 0x000 0x1 0x0
-#define MX6DL_PAD_ENET_TXD0__ESAI_TX4_RX1          0x204 0x5d4 0x854 0x2 0x0
-#define MX6DL_PAD_ENET_TXD0__GPIO1_IO30            0x204 0x5d4 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_TXD1__MLB_CLK               0x208 0x5d8 0x8dc 0x0 0x0
-#define MX6DL_PAD_ENET_TXD1__ENET_TX_DATA1         0x208 0x5d8 0x000 0x1 0x0
-#define MX6DL_PAD_ENET_TXD1__ESAI_TX2_RX3          0x208 0x5d8 0x84c 0x2 0x0
-#define MX6DL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN   0x208 0x5d8 0x000 0x4 0x0
-#define MX6DL_PAD_ENET_TXD1__GPIO1_IO29            0x208 0x5d8 0x000 0x5 0x0
-#define MX6DL_PAD_ENET_TXD1__I2C4_SDA              0x208 0x5d8 0x884 0x9 0x0
-#define MX6DL_PAD_GPIO_0__CCM_CLKO1                0x20c 0x5dc 0x000 0x0 0x0
-#define MX6DL_PAD_GPIO_0__KEY_COL5                 0x20c 0x5dc 0x8c0 0x2 0x1
-#define MX6DL_PAD_GPIO_0__ASRC_EXT_CLK             0x20c 0x5dc 0x794 0x3 0x0
-#define MX6DL_PAD_GPIO_0__EPIT1_OUT                0x20c 0x5dc 0x000 0x4 0x0
-#define MX6DL_PAD_GPIO_0__GPIO1_IO00               0x20c 0x5dc 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_0__USB_H1_PWR               0x20c 0x5dc 0x000 0x6 0x0
-#define MX6DL_PAD_GPIO_0__SNVS_VIO_5               0x20c 0x5dc 0x000 0x7 0x0
-#define MX6DL_PAD_GPIO_1__ESAI_RX_CLK              0x210 0x5e0 0x83c 0x0 0x1
-#define MX6DL_PAD_GPIO_1__WDOG2_B                  0x210 0x5e0 0x000 0x1 0x0
-#define MX6DL_PAD_GPIO_1__KEY_ROW5                 0x210 0x5e0 0x8cc 0x2 0x1
-#define MX6DL_PAD_GPIO_1__USB_OTG_ID               0x210 0x5e0 0x790 0x3 0x1
-#define MX6DL_PAD_GPIO_1__PWM2_OUT                 0x210 0x5e0 0x000 0x4 0x0
-#define MX6DL_PAD_GPIO_1__GPIO1_IO01               0x210 0x5e0 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_1__SD1_CD_B                 0x210 0x5e0 0x000 0x6 0x0
-#define MX6DL_PAD_GPIO_16__ESAI_TX3_RX2            0x214 0x5e4 0x850 0x0 0x1
-#define MX6DL_PAD_GPIO_16__ENET_1588_EVENT2_IN     0x214 0x5e4 0x000 0x1 0x0
-#define MX6DL_PAD_GPIO_16__ENET_REF_CLK            0x214 0x5e4 0x80c 0x2 0x0
-#define MX6DL_PAD_GPIO_16__SD1_LCTL                0x214 0x5e4 0x000 0x3 0x0
-#define MX6DL_PAD_GPIO_16__SPDIF_IN                0x214 0x5e4 0x8f0 0x4 0x2
-#define MX6DL_PAD_GPIO_16__GPIO7_IO11              0x214 0x5e4 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_16__I2C3_SDA                0x214 0x5e4 0x87c 0x6 0x1
-#define MX6DL_PAD_GPIO_16__JTAG_DE_B               0x214 0x5e4 0x000 0x7 0x0
-#define MX6DL_PAD_GPIO_17__ESAI_TX0                0x218 0x5e8 0x844 0x0 0x0
-#define MX6DL_PAD_GPIO_17__ENET_1588_EVENT3_IN     0x218 0x5e8 0x000 0x1 0x0
-#define MX6DL_PAD_GPIO_17__CCM_PMIC_READY          0x218 0x5e8 0x7d4 0x2 0x1
-#define MX6DL_PAD_GPIO_17__SDMA_EXT_EVENT0         0x218 0x5e8 0x8e8 0x3 0x1
-#define MX6DL_PAD_GPIO_17__SPDIF_OUT               0x218 0x5e8 0x000 0x4 0x0
-#define MX6DL_PAD_GPIO_17__GPIO7_IO12              0x218 0x5e8 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_18__ESAI_TX1                0x21c 0x5ec 0x848 0x0 0x0
-#define MX6DL_PAD_GPIO_18__ENET_RX_CLK             0x21c 0x5ec 0x814 0x1 0x0
-#define MX6DL_PAD_GPIO_18__SD3_VSELECT             0x21c 0x5ec 0x000 0x2 0x0
-#define MX6DL_PAD_GPIO_18__SDMA_EXT_EVENT1         0x21c 0x5ec 0x8ec 0x3 0x1
-#define MX6DL_PAD_GPIO_18__ASRC_EXT_CLK            0x21c 0x5ec 0x794 0x4 0x1
-#define MX6DL_PAD_GPIO_18__GPIO7_IO13              0x21c 0x5ec 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_18__SNVS_VIO_5_CTL          0x21c 0x5ec 0x000 0x6 0x0
-#define MX6DL_PAD_GPIO_19__KEY_COL5                0x220 0x5f0 0x8c0 0x0 0x2
-#define MX6DL_PAD_GPIO_19__ENET_1588_EVENT0_OUT    0x220 0x5f0 0x000 0x1 0x0
-#define MX6DL_PAD_GPIO_19__SPDIF_OUT               0x220 0x5f0 0x000 0x2 0x0
-#define MX6DL_PAD_GPIO_19__CCM_CLKO1               0x220 0x5f0 0x000 0x3 0x0
-#define MX6DL_PAD_GPIO_19__ECSPI1_RDY              0x220 0x5f0 0x000 0x4 0x0
-#define MX6DL_PAD_GPIO_19__GPIO4_IO05              0x220 0x5f0 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_19__ENET_TX_ER              0x220 0x5f0 0x000 0x6 0x0
-#define MX6DL_PAD_GPIO_2__ESAI_TX_FS               0x224 0x5f4 0x830 0x0 0x1
-#define MX6DL_PAD_GPIO_2__KEY_ROW6                 0x224 0x5f4 0x8d0 0x2 0x1
-#define MX6DL_PAD_GPIO_2__GPIO1_IO02               0x224 0x5f4 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_2__SD2_WP                   0x224 0x5f4 0x000 0x6 0x0
-#define MX6DL_PAD_GPIO_2__MLB_DATA                 0x224 0x5f4 0x8e0 0x7 0x1
-#define MX6DL_PAD_GPIO_3__ESAI_RX_HF_CLK           0x228 0x5f8 0x834 0x0 0x1
-#define MX6DL_PAD_GPIO_3__I2C3_SCL                 0x228 0x5f8 0x878 0x2 0x1
-#define MX6DL_PAD_GPIO_3__XTALOSC_REF_CLK_24M      0x228 0x5f8 0x000 0x3 0x0
-#define MX6DL_PAD_GPIO_3__CCM_CLKO2                0x228 0x5f8 0x000 0x4 0x0
-#define MX6DL_PAD_GPIO_3__GPIO1_IO03               0x228 0x5f8 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_3__USB_H1_OC                0x228 0x5f8 0x924 0x6 0x1
-#define MX6DL_PAD_GPIO_3__MLB_CLK                  0x228 0x5f8 0x8dc 0x7 0x1
-#define MX6DL_PAD_GPIO_4__ESAI_TX_HF_CLK           0x22c 0x5fc 0x838 0x0 0x1
-#define MX6DL_PAD_GPIO_4__KEY_COL7                 0x22c 0x5fc 0x8c8 0x2 0x1
-#define MX6DL_PAD_GPIO_4__GPIO1_IO04               0x22c 0x5fc 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_4__SD2_CD_B                 0x22c 0x5fc 0x000 0x6 0x0
-#define MX6DL_PAD_GPIO_5__ESAI_TX2_RX3             0x230 0x600 0x84c 0x0 0x1
-#define MX6DL_PAD_GPIO_5__KEY_ROW7                 0x230 0x600 0x8d4 0x2 0x1
-#define MX6DL_PAD_GPIO_5__CCM_CLKO1                0x230 0x600 0x000 0x3 0x0
-#define MX6DL_PAD_GPIO_5__GPIO1_IO05               0x230 0x600 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_5__I2C3_SCL                 0x230 0x600 0x878 0x6 0x2
-#define MX6DL_PAD_GPIO_5__ARM_EVENTI               0x230 0x600 0x000 0x7 0x0
-#define MX6DL_PAD_GPIO_6__ESAI_TX_CLK              0x234 0x604 0x840 0x0 0x1
-#define MX6DL_PAD_GPIO_6__I2C3_SDA                 0x234 0x604 0x87c 0x2 0x2
-#define MX6DL_PAD_GPIO_6__GPIO1_IO06               0x234 0x604 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_6__SD2_LCTL                 0x234 0x604 0x000 0x6 0x0
-#define MX6DL_PAD_GPIO_6__MLB_SIG                  0x234 0x604 0x8e4 0x7 0x1
-#define MX6DL_PAD_GPIO_7__ESAI_TX4_RX1             0x238 0x608 0x854 0x0 0x1
-#define MX6DL_PAD_GPIO_7__EPIT1_OUT                0x238 0x608 0x000 0x2 0x0
-#define MX6DL_PAD_GPIO_7__FLEXCAN1_TX              0x238 0x608 0x000 0x3 0x0
-#define MX6DL_PAD_GPIO_7__UART2_TX_DATA            0x238 0x608 0x000 0x4 0x0
-#define MX6DL_PAD_GPIO_7__UART2_RX_DATA            0x238 0x608 0x904 0x4 0x2
-#define MX6DL_PAD_GPIO_7__GPIO1_IO07               0x238 0x608 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_7__SPDIF_LOCK               0x238 0x608 0x000 0x6 0x0
-#define MX6DL_PAD_GPIO_7__USB_OTG_HOST_MODE        0x238 0x608 0x000 0x7 0x0
-#define MX6DL_PAD_GPIO_7__I2C4_SCL                 0x238 0x608 0x880 0x8 0x1
-#define MX6DL_PAD_GPIO_8__ESAI_TX5_RX0             0x23c 0x60c 0x858 0x0 0x1
-#define MX6DL_PAD_GPIO_8__XTALOSC_REF_CLK_32K      0x23c 0x60c 0x000 0x1 0x0
-#define MX6DL_PAD_GPIO_8__EPIT2_OUT                0x23c 0x60c 0x000 0x2 0x0
-#define MX6DL_PAD_GPIO_8__FLEXCAN1_RX              0x23c 0x60c 0x7c8 0x3 0x0
-#define MX6DL_PAD_GPIO_8__UART2_RX_DATA            0x23c 0x60c 0x904 0x4 0x3
-#define MX6DL_PAD_GPIO_8__UART2_TX_DATA            0x23c 0x60c 0x000 0x4 0x0
-#define MX6DL_PAD_GPIO_8__GPIO1_IO08               0x23c 0x60c 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_8__SPDIF_SR_CLK             0x23c 0x60c 0x000 0x6 0x0
-#define MX6DL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE     0x23c 0x60c 0x000 0x7 0x0
-#define MX6DL_PAD_GPIO_8__I2C4_SDA                 0x23c 0x60c 0x884 0x8 0x1
-#define MX6DL_PAD_GPIO_9__ESAI_RX_FS               0x240 0x610 0x82c 0x0 0x1
-#define MX6DL_PAD_GPIO_9__WDOG1_B                  0x240 0x610 0x000 0x1 0x0
-#define MX6DL_PAD_GPIO_9__KEY_COL6                 0x240 0x610 0x8c4 0x2 0x1
-#define MX6DL_PAD_GPIO_9__CCM_REF_EN_B             0x240 0x610 0x000 0x3 0x0
-#define MX6DL_PAD_GPIO_9__PWM1_OUT                 0x240 0x610 0x000 0x4 0x0
-#define MX6DL_PAD_GPIO_9__GPIO1_IO09               0x240 0x610 0x000 0x5 0x0
-#define MX6DL_PAD_GPIO_9__SD1_WP                   0x240 0x610 0x92c 0x6 0x1
-#define MX6DL_PAD_KEY_COL0__ECSPI1_SCLK            0x244 0x62c 0x7d8 0x0 0x3
-#define MX6DL_PAD_KEY_COL0__ENET_RX_DATA3          0x244 0x62c 0x824 0x1 0x0
-#define MX6DL_PAD_KEY_COL0__AUD5_TXC               0x244 0x62c 0x7c0 0x2 0x1
-#define MX6DL_PAD_KEY_COL0__KEY_COL0               0x244 0x62c 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_COL0__UART4_TX_DATA          0x244 0x62c 0x000 0x4 0x0
-#define MX6DL_PAD_KEY_COL0__UART4_RX_DATA          0x244 0x62c 0x914 0x4 0x2
-#define MX6DL_PAD_KEY_COL0__GPIO4_IO06             0x244 0x62c 0x000 0x5 0x0
-#define MX6DL_PAD_KEY_COL0__DCIC1_OUT              0x244 0x62c 0x000 0x6 0x0
-#define MX6DL_PAD_KEY_COL1__ECSPI1_MISO            0x248 0x630 0x7dc 0x0 0x3
-#define MX6DL_PAD_KEY_COL1__ENET_MDIO              0x248 0x630 0x810 0x1 0x1
-#define MX6DL_PAD_KEY_COL1__AUD5_TXFS              0x248 0x630 0x7c4 0x2 0x1
-#define MX6DL_PAD_KEY_COL1__KEY_COL1               0x248 0x630 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_COL1__UART5_TX_DATA          0x248 0x630 0x000 0x4 0x0
-#define MX6DL_PAD_KEY_COL1__UART5_RX_DATA          0x248 0x630 0x91c 0x4 0x2
-#define MX6DL_PAD_KEY_COL1__GPIO4_IO08             0x248 0x630 0x000 0x5 0x0
-#define MX6DL_PAD_KEY_COL1__SD1_VSELECT            0x248 0x630 0x000 0x6 0x0
-#define MX6DL_PAD_KEY_COL2__ECSPI1_SS1             0x24c 0x634 0x7e8 0x0 0x2
-#define MX6DL_PAD_KEY_COL2__ENET_RX_DATA2          0x24c 0x634 0x820 0x1 0x0
-#define MX6DL_PAD_KEY_COL2__FLEXCAN1_TX            0x24c 0x634 0x000 0x2 0x0
-#define MX6DL_PAD_KEY_COL2__KEY_COL2               0x24c 0x634 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_COL2__ENET_MDC               0x24c 0x634 0x000 0x4 0x0
-#define MX6DL_PAD_KEY_COL2__GPIO4_IO10             0x24c 0x634 0x000 0x5 0x0
-#define MX6DL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE    0x24c 0x634 0x000 0x6 0x0
-#define MX6DL_PAD_KEY_COL3__ECSPI1_SS3             0x250 0x638 0x7f0 0x0 0x1
-#define MX6DL_PAD_KEY_COL3__ENET_CRS               0x250 0x638 0x000 0x1 0x0
-#define MX6DL_PAD_KEY_COL3__HDMI_TX_DDC_SCL        0x250 0x638 0x860 0x2 0x1
-#define MX6DL_PAD_KEY_COL3__KEY_COL3               0x250 0x638 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_COL3__I2C2_SCL               0x250 0x638 0x870 0x4 0x1
-#define MX6DL_PAD_KEY_COL3__GPIO4_IO12             0x250 0x638 0x000 0x5 0x0
-#define MX6DL_PAD_KEY_COL3__SPDIF_IN               0x250 0x638 0x8f0 0x6 0x3
-#define MX6DL_PAD_KEY_COL4__FLEXCAN2_TX            0x254 0x63c 0x000 0x0 0x0
-#define MX6DL_PAD_KEY_COL4__IPU1_SISG4             0x254 0x63c 0x000 0x1 0x0
-#define MX6DL_PAD_KEY_COL4__USB_OTG_OC             0x254 0x63c 0x920 0x2 0x1
-#define MX6DL_PAD_KEY_COL4__KEY_COL4               0x254 0x63c 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_COL4__UART5_RTS_B            0x254 0x63c 0x918 0x4 0x2
-#define MX6DL_PAD_KEY_COL4__UART5_CTS_B            0x254 0x63c 0x000 0x4 0x0
-#define MX6DL_PAD_KEY_COL4__GPIO4_IO14             0x254 0x63c 0x000 0x5 0x0
-#define MX6DL_PAD_KEY_ROW0__ECSPI1_MOSI            0x258 0x640 0x7e0 0x0 0x3
-#define MX6DL_PAD_KEY_ROW0__ENET_TX_DATA3          0x258 0x640 0x000 0x1 0x0
-#define MX6DL_PAD_KEY_ROW0__AUD5_TXD               0x258 0x640 0x7b4 0x2 0x1
-#define MX6DL_PAD_KEY_ROW0__KEY_ROW0               0x258 0x640 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_ROW0__UART4_RX_DATA          0x258 0x640 0x914 0x4 0x3
-#define MX6DL_PAD_KEY_ROW0__UART4_TX_DATA          0x258 0x640 0x000 0x4 0x0
-#define MX6DL_PAD_KEY_ROW0__GPIO4_IO07             0x258 0x640 0x000 0x5 0x0
-#define MX6DL_PAD_KEY_ROW0__DCIC2_OUT              0x258 0x640 0x000 0x6 0x0
-#define MX6DL_PAD_KEY_ROW1__ECSPI1_SS0             0x25c 0x644 0x7e4 0x0 0x3
-#define MX6DL_PAD_KEY_ROW1__ENET_COL               0x25c 0x644 0x000 0x1 0x0
-#define MX6DL_PAD_KEY_ROW1__AUD5_RXD               0x25c 0x644 0x7b0 0x2 0x1
-#define MX6DL_PAD_KEY_ROW1__KEY_ROW1               0x25c 0x644 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_ROW1__UART5_RX_DATA          0x25c 0x644 0x91c 0x4 0x3
-#define MX6DL_PAD_KEY_ROW1__UART5_TX_DATA          0x25c 0x644 0x000 0x4 0x0
-#define MX6DL_PAD_KEY_ROW1__GPIO4_IO09             0x25c 0x644 0x000 0x5 0x0
-#define MX6DL_PAD_KEY_ROW1__SD2_VSELECT            0x25c 0x644 0x000 0x6 0x0
-#define MX6DL_PAD_KEY_ROW2__ECSPI1_SS2             0x260 0x648 0x7ec 0x0 0x1
-#define MX6DL_PAD_KEY_ROW2__ENET_TX_DATA2          0x260 0x648 0x000 0x1 0x0
-#define MX6DL_PAD_KEY_ROW2__FLEXCAN1_RX            0x260 0x648 0x7c8 0x2 0x1
-#define MX6DL_PAD_KEY_ROW2__KEY_ROW2               0x260 0x648 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_ROW2__SD2_VSELECT            0x260 0x648 0x000 0x4 0x0
-#define MX6DL_PAD_KEY_ROW2__GPIO4_IO11             0x260 0x648 0x000 0x5 0x0
-#define MX6DL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE       0x260 0x648 0x85c 0x6 0x1
-#define MX6DL_PAD_KEY_ROW3__ASRC_EXT_CLK           0x264 0x64c 0x794 0x1 0x2
-#define MX6DL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA        0x264 0x64c 0x864 0x2 0x1
-#define MX6DL_PAD_KEY_ROW3__KEY_ROW3               0x264 0x64c 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_ROW3__I2C2_SDA               0x264 0x64c 0x874 0x4 0x1
-#define MX6DL_PAD_KEY_ROW3__GPIO4_IO13             0x264 0x64c 0x000 0x5 0x0
-#define MX6DL_PAD_KEY_ROW3__SD1_VSELECT            0x264 0x64c 0x000 0x6 0x0
-#define MX6DL_PAD_KEY_ROW4__FLEXCAN2_RX            0x268 0x650 0x7cc 0x0 0x0
-#define MX6DL_PAD_KEY_ROW4__IPU1_SISG5             0x268 0x650 0x000 0x1 0x0
-#define MX6DL_PAD_KEY_ROW4__USB_OTG_PWR            0x268 0x650 0x000 0x2 0x0
-#define MX6DL_PAD_KEY_ROW4__KEY_ROW4               0x268 0x650 0x000 0x3 0x0
-#define MX6DL_PAD_KEY_ROW4__UART5_CTS_B            0x268 0x650 0x000 0x4 0x0
-#define MX6DL_PAD_KEY_ROW4__UART5_RTS_B            0x268 0x650 0x918 0x4 0x3
-#define MX6DL_PAD_KEY_ROW4__GPIO4_IO15             0x268 0x650 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_ALE__NAND_ALE              0x26c 0x654 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_ALE__SD4_RESET             0x26c 0x654 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_ALE__GPIO6_IO08            0x26c 0x654 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_CLE__NAND_CLE              0x270 0x658 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_CLE__GPIO6_IO07            0x270 0x658 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_CS0__NAND_CE0_B            0x274 0x65c 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_CS0__GPIO6_IO11            0x274 0x65c 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_CS1__NAND_CE1_B            0x278 0x660 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_CS1__SD4_VSELECT           0x278 0x660 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_CS1__SD3_VSELECT           0x278 0x660 0x000 0x2 0x0
-#define MX6DL_PAD_NANDF_CS1__GPIO6_IO14            0x278 0x660 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_CS2__NAND_CE2_B            0x27c 0x664 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_CS2__IPU1_SISG0            0x27c 0x664 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_CS2__ESAI_TX0              0x27c 0x664 0x844 0x2 0x1
-#define MX6DL_PAD_NANDF_CS2__EIM_CRE               0x27c 0x664 0x000 0x3 0x0
-#define MX6DL_PAD_NANDF_CS2__CCM_CLKO2             0x27c 0x664 0x000 0x4 0x0
-#define MX6DL_PAD_NANDF_CS2__GPIO6_IO15            0x27c 0x664 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_CS3__NAND_CE3_B            0x280 0x668 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_CS3__IPU1_SISG1            0x280 0x668 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_CS3__ESAI_TX1              0x280 0x668 0x848 0x2 0x1
-#define MX6DL_PAD_NANDF_CS3__EIM_ADDR26            0x280 0x668 0x000 0x3 0x0
-#define MX6DL_PAD_NANDF_CS3__GPIO6_IO16            0x280 0x668 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_CS3__I2C4_SDA              0x280 0x668 0x884 0x9 0x2
-#define MX6DL_PAD_NANDF_D0__NAND_DATA00            0x284 0x66c 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_D0__SD1_DATA4              0x284 0x66c 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_D0__GPIO2_IO00             0x284 0x66c 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_D1__NAND_DATA01            0x288 0x670 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_D1__SD1_DATA5              0x288 0x670 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_D1__GPIO2_IO01             0x288 0x670 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_D2__NAND_DATA02            0x28c 0x674 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_D2__SD1_DATA6              0x28c 0x674 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_D2__GPIO2_IO02             0x28c 0x674 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_D3__NAND_DATA03            0x290 0x678 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_D3__SD1_DATA7              0x290 0x678 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_D3__GPIO2_IO03             0x290 0x678 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_D4__NAND_DATA04            0x294 0x67c 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_D4__SD2_DATA4              0x294 0x67c 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_D4__GPIO2_IO04             0x294 0x67c 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_D5__NAND_DATA05            0x298 0x680 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_D5__SD2_DATA5              0x298 0x680 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_D5__GPIO2_IO05             0x298 0x680 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_D6__NAND_DATA06            0x29c 0x684 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_D6__SD2_DATA6              0x29c 0x684 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_D6__GPIO2_IO06             0x29c 0x684 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_D7__NAND_DATA07            0x2a0 0x688 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_D7__SD2_DATA7              0x2a0 0x688 0x000 0x1 0x0
-#define MX6DL_PAD_NANDF_D7__GPIO2_IO07             0x2a0 0x688 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_RB0__NAND_READY_B          0x2a4 0x68c 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_RB0__GPIO6_IO10            0x2a4 0x68c 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_WP_B__NAND_WP_B            0x2a8 0x690 0x000 0x0 0x0
-#define MX6DL_PAD_NANDF_WP_B__GPIO6_IO09           0x2a8 0x690 0x000 0x5 0x0
-#define MX6DL_PAD_NANDF_WP_B__I2C4_SCL             0x2a8 0x690 0x880 0x9 0x2
-#define MX6DL_PAD_RGMII_RD0__HSI_RX_READY          0x2ac 0x694 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_RD0__RGMII_RD0             0x2ac 0x694 0x818 0x1 0x1
-#define MX6DL_PAD_RGMII_RD0__GPIO6_IO25            0x2ac 0x694 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_RD1__HSI_TX_FLAG           0x2b0 0x698 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_RD1__RGMII_RD1             0x2b0 0x698 0x81c 0x1 0x1
-#define MX6DL_PAD_RGMII_RD1__GPIO6_IO27            0x2b0 0x698 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_RD2__HSI_TX_DATA           0x2b4 0x69c 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_RD2__RGMII_RD2             0x2b4 0x69c 0x820 0x1 0x1
-#define MX6DL_PAD_RGMII_RD2__GPIO6_IO28            0x2b4 0x69c 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_RD3__HSI_TX_WAKE           0x2b8 0x6a0 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_RD3__RGMII_RD3             0x2b8 0x6a0 0x824 0x1 0x1
-#define MX6DL_PAD_RGMII_RD3__GPIO6_IO29            0x2b8 0x6a0 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_RX_CTL__USB_H3_DATA        0x2bc 0x6a4 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_RX_CTL__RGMII_RX_CTL       0x2bc 0x6a4 0x828 0x1 0x1
-#define MX6DL_PAD_RGMII_RX_CTL__GPIO6_IO24         0x2bc 0x6a4 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_RXC__USB_H3_STROBE         0x2c0 0x6a8 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_RXC__RGMII_RXC             0x2c0 0x6a8 0x814 0x1 0x1
-#define MX6DL_PAD_RGMII_RXC__GPIO6_IO30            0x2c0 0x6a8 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_TD0__HSI_TX_READY          0x2c4 0x6ac 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_TD0__RGMII_TD0             0x2c4 0x6ac 0x000 0x1 0x0
-#define MX6DL_PAD_RGMII_TD0__GPIO6_IO20            0x2c4 0x6ac 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_TD1__HSI_RX_FLAG           0x2c8 0x6b0 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_TD1__RGMII_TD1             0x2c8 0x6b0 0x000 0x1 0x0
-#define MX6DL_PAD_RGMII_TD1__GPIO6_IO21            0x2c8 0x6b0 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_TD2__HSI_RX_DATA           0x2cc 0x6b4 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_TD2__RGMII_TD2             0x2cc 0x6b4 0x000 0x1 0x0
-#define MX6DL_PAD_RGMII_TD2__GPIO6_IO22            0x2cc 0x6b4 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_TD3__HSI_RX_WAKE           0x2d0 0x6b8 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_TD3__RGMII_TD3             0x2d0 0x6b8 0x000 0x1 0x0
-#define MX6DL_PAD_RGMII_TD3__GPIO6_IO23            0x2d0 0x6b8 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_TX_CTL__USB_H2_STROBE      0x2d4 0x6bc 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_TX_CTL__RGMII_TX_CTL       0x2d4 0x6bc 0x000 0x1 0x0
-#define MX6DL_PAD_RGMII_TX_CTL__GPIO6_IO26         0x2d4 0x6bc 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_TX_CTL__ENET_REF_CLK       0x2d4 0x6bc 0x80c 0x7 0x1
-#define MX6DL_PAD_RGMII_TXC__USB_H2_DATA           0x2d8 0x6c0 0x000 0x0 0x0
-#define MX6DL_PAD_RGMII_TXC__RGMII_TXC             0x2d8 0x6c0 0x000 0x1 0x0
-#define MX6DL_PAD_RGMII_TXC__SPDIF_EXT_CLK         0x2d8 0x6c0 0x8f4 0x2 0x1
-#define MX6DL_PAD_RGMII_TXC__GPIO6_IO19            0x2d8 0x6c0 0x000 0x5 0x0
-#define MX6DL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M   0x2d8 0x6c0 0x000 0x7 0x0
-#define MX6DL_PAD_SD1_CLK__SD1_CLK                 0x2dc 0x6c4 0x928 0x0 0x1
-#define MX6DL_PAD_SD1_CLK__GPT_CLKIN               0x2dc 0x6c4 0x000 0x3 0x0
-#define MX6DL_PAD_SD1_CLK__GPIO1_IO20              0x2dc 0x6c4 0x000 0x5 0x0
-#define MX6DL_PAD_SD1_CMD__SD1_CMD                 0x2e0 0x6c8 0x000 0x0 0x0
-#define MX6DL_PAD_SD1_CMD__PWM4_OUT                0x2e0 0x6c8 0x000 0x2 0x0
-#define MX6DL_PAD_SD1_CMD__GPT_COMPARE1            0x2e0 0x6c8 0x000 0x3 0x0
-#define MX6DL_PAD_SD1_CMD__GPIO1_IO18              0x2e0 0x6c8 0x000 0x5 0x0
-#define MX6DL_PAD_SD1_DAT0__SD1_DATA0              0x2e4 0x6cc 0x000 0x0 0x0
-#define MX6DL_PAD_SD1_DAT0__GPT_CAPTURE1           0x2e4 0x6cc 0x000 0x3 0x0
-#define MX6DL_PAD_SD1_DAT0__GPIO1_IO16             0x2e4 0x6cc 0x000 0x5 0x0
-#define MX6DL_PAD_SD1_DAT1__SD1_DATA1              0x2e8 0x6d0 0x000 0x0 0x0
-#define MX6DL_PAD_SD1_DAT1__PWM3_OUT               0x2e8 0x6d0 0x000 0x2 0x0
-#define MX6DL_PAD_SD1_DAT1__GPT_CAPTURE2           0x2e8 0x6d0 0x000 0x3 0x0
-#define MX6DL_PAD_SD1_DAT1__GPIO1_IO17             0x2e8 0x6d0 0x000 0x5 0x0
-#define MX6DL_PAD_SD1_DAT2__SD1_DATA2              0x2ec 0x6d4 0x000 0x0 0x0
-#define MX6DL_PAD_SD1_DAT2__GPT_COMPARE2           0x2ec 0x6d4 0x000 0x2 0x0
-#define MX6DL_PAD_SD1_DAT2__PWM2_OUT               0x2ec 0x6d4 0x000 0x3 0x0
-#define MX6DL_PAD_SD1_DAT2__WDOG1_B                0x2ec 0x6d4 0x000 0x4 0x0
-#define MX6DL_PAD_SD1_DAT2__GPIO1_IO19             0x2ec 0x6d4 0x000 0x5 0x0
-#define MX6DL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB      0x2ec 0x6d4 0x000 0x6 0x0
-#define MX6DL_PAD_SD1_DAT3__SD1_DATA3              0x2f0 0x6d8 0x000 0x0 0x0
-#define MX6DL_PAD_SD1_DAT3__GPT_COMPARE3           0x2f0 0x6d8 0x000 0x2 0x0
-#define MX6DL_PAD_SD1_DAT3__PWM1_OUT               0x2f0 0x6d8 0x000 0x3 0x0
-#define MX6DL_PAD_SD1_DAT3__WDOG2_B                0x2f0 0x6d8 0x000 0x4 0x0
-#define MX6DL_PAD_SD1_DAT3__GPIO1_IO21             0x2f0 0x6d8 0x000 0x5 0x0
-#define MX6DL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB      0x2f0 0x6d8 0x000 0x6 0x0
-#define MX6DL_PAD_SD2_CLK__SD2_CLK                 0x2f4 0x6dc 0x930 0x0 0x1
-#define MX6DL_PAD_SD2_CLK__KEY_COL5                0x2f4 0x6dc 0x8c0 0x2 0x3
-#define MX6DL_PAD_SD2_CLK__AUD4_RXFS               0x2f4 0x6dc 0x7a4 0x3 0x1
-#define MX6DL_PAD_SD2_CLK__GPIO1_IO10              0x2f4 0x6dc 0x000 0x5 0x0
-#define MX6DL_PAD_SD2_CMD__SD2_CMD                 0x2f8 0x6e0 0x000 0x0 0x0
-#define MX6DL_PAD_SD2_CMD__KEY_ROW5                0x2f8 0x6e0 0x8cc 0x2 0x2
-#define MX6DL_PAD_SD2_CMD__AUD4_RXC                0x2f8 0x6e0 0x7a0 0x3 0x1
-#define MX6DL_PAD_SD2_CMD__GPIO1_IO11              0x2f8 0x6e0 0x000 0x5 0x0
-#define MX6DL_PAD_SD2_DAT0__SD2_DATA0              0x2fc 0x6e4 0x000 0x0 0x0
-#define MX6DL_PAD_SD2_DAT0__AUD4_RXD               0x2fc 0x6e4 0x798 0x3 0x1
-#define MX6DL_PAD_SD2_DAT0__KEY_ROW7               0x2fc 0x6e4 0x8d4 0x4 0x2
-#define MX6DL_PAD_SD2_DAT0__GPIO1_IO15             0x2fc 0x6e4 0x000 0x5 0x0
-#define MX6DL_PAD_SD2_DAT0__DCIC2_OUT              0x2fc 0x6e4 0x000 0x6 0x0
-#define MX6DL_PAD_SD2_DAT1__SD2_DATA1              0x300 0x6e8 0x000 0x0 0x0
-#define MX6DL_PAD_SD2_DAT1__EIM_CS2_B              0x300 0x6e8 0x000 0x2 0x0
-#define MX6DL_PAD_SD2_DAT1__AUD4_TXFS              0x300 0x6e8 0x7ac 0x3 0x1
-#define MX6DL_PAD_SD2_DAT1__KEY_COL7               0x300 0x6e8 0x8c8 0x4 0x2
-#define MX6DL_PAD_SD2_DAT1__GPIO1_IO14             0x300 0x6e8 0x000 0x5 0x0
-#define MX6DL_PAD_SD2_DAT2__SD2_DATA2              0x304 0x6ec 0x000 0x0 0x0
-#define MX6DL_PAD_SD2_DAT2__EIM_CS3_B              0x304 0x6ec 0x000 0x2 0x0
-#define MX6DL_PAD_SD2_DAT2__AUD4_TXD               0x304 0x6ec 0x79c 0x3 0x1
-#define MX6DL_PAD_SD2_DAT2__KEY_ROW6               0x304 0x6ec 0x8d0 0x4 0x2
-#define MX6DL_PAD_SD2_DAT2__GPIO1_IO13             0x304 0x6ec 0x000 0x5 0x0
-#define MX6DL_PAD_SD2_DAT3__SD2_DATA3              0x308 0x6f0 0x000 0x0 0x0
-#define MX6DL_PAD_SD2_DAT3__KEY_COL6               0x308 0x6f0 0x8c4 0x2 0x2
-#define MX6DL_PAD_SD2_DAT3__AUD4_TXC               0x308 0x6f0 0x7a8 0x3 0x1
-#define MX6DL_PAD_SD2_DAT3__GPIO1_IO12             0x308 0x6f0 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_CLK__SD3_CLK                 0x30c 0x6f4 0x934 0x0 0x1
-#define MX6DL_PAD_SD3_CLK__UART2_RTS_B             0x30c 0x6f4 0x900 0x1 0x2
-#define MX6DL_PAD_SD3_CLK__UART2_CTS_B             0x30c 0x6f4 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_CLK__FLEXCAN1_RX             0x30c 0x6f4 0x7c8 0x2 0x2
-#define MX6DL_PAD_SD3_CLK__GPIO7_IO03              0x30c 0x6f4 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_CMD__SD3_CMD                 0x310 0x6f8 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_CMD__UART2_CTS_B             0x310 0x6f8 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_CMD__UART2_RTS_B             0x310 0x6f8 0x900 0x1 0x3
-#define MX6DL_PAD_SD3_CMD__FLEXCAN1_TX             0x310 0x6f8 0x000 0x2 0x0
-#define MX6DL_PAD_SD3_CMD__GPIO7_IO02              0x310 0x6f8 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_DAT0__SD3_DATA0              0x314 0x6fc 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_DAT0__UART1_CTS_B            0x314 0x6fc 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_DAT0__UART1_RTS_B            0x314 0x6fc 0x8f8 0x1 0x2
-#define MX6DL_PAD_SD3_DAT0__FLEXCAN2_TX            0x314 0x6fc 0x000 0x2 0x0
-#define MX6DL_PAD_SD3_DAT0__GPIO7_IO04             0x314 0x6fc 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_DAT1__SD3_DATA1              0x318 0x700 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_DAT1__UART1_RTS_B            0x318 0x700 0x8f8 0x1 0x3
-#define MX6DL_PAD_SD3_DAT1__UART1_CTS_B            0x318 0x700 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_DAT1__FLEXCAN2_RX            0x318 0x700 0x7cc 0x2 0x1
-#define MX6DL_PAD_SD3_DAT1__GPIO7_IO05             0x318 0x700 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_DAT2__SD3_DATA2              0x31c 0x704 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_DAT2__GPIO7_IO06             0x31c 0x704 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_DAT3__SD3_DATA3              0x320 0x708 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_DAT3__UART3_CTS_B            0x320 0x708 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_DAT3__UART3_RTS_B            0x320 0x708 0x908 0x1 0x4
-#define MX6DL_PAD_SD3_DAT3__GPIO7_IO07             0x320 0x708 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_DAT4__SD3_DATA4              0x324 0x70c 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_DAT4__UART2_RX_DATA          0x324 0x70c 0x904 0x1 0x4
-#define MX6DL_PAD_SD3_DAT4__UART2_TX_DATA          0x324 0x70c 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_DAT4__GPIO7_IO01             0x324 0x70c 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_DAT5__SD3_DATA5              0x328 0x710 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_DAT5__UART2_TX_DATA          0x328 0x710 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_DAT5__UART2_RX_DATA          0x328 0x710 0x904 0x1 0x5
-#define MX6DL_PAD_SD3_DAT5__GPIO7_IO00             0x328 0x710 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_DAT6__SD3_DATA6              0x32c 0x714 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_DAT6__UART1_RX_DATA          0x32c 0x714 0x8fc 0x1 0x2
-#define MX6DL_PAD_SD3_DAT6__UART1_TX_DATA          0x32c 0x714 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_DAT6__GPIO6_IO18             0x32c 0x714 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_DAT7__SD3_DATA7              0x330 0x718 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_DAT7__UART1_TX_DATA          0x330 0x718 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_DAT7__UART1_RX_DATA          0x330 0x718 0x8fc 0x1 0x3
-#define MX6DL_PAD_SD3_DAT7__GPIO6_IO17             0x330 0x718 0x000 0x5 0x0
-#define MX6DL_PAD_SD3_RST__SD3_RESET               0x334 0x71c 0x000 0x0 0x0
-#define MX6DL_PAD_SD3_RST__UART3_RTS_B             0x334 0x71c 0x908 0x1 0x5
-#define MX6DL_PAD_SD3_RST__UART3_CTS_B             0x334 0x71c 0x000 0x1 0x0
-#define MX6DL_PAD_SD3_RST__GPIO7_IO08              0x334 0x71c 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_CLK__SD4_CLK                 0x338 0x720 0x938 0x0 0x1
-#define MX6DL_PAD_SD4_CLK__NAND_WE_B               0x338 0x720 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_CLK__UART3_RX_DATA           0x338 0x720 0x90c 0x2 0x2
-#define MX6DL_PAD_SD4_CLK__UART3_TX_DATA           0x338 0x720 0x000 0x2 0x0
-#define MX6DL_PAD_SD4_CLK__GPIO7_IO10              0x338 0x720 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_CMD__SD4_CMD                 0x33c 0x724 0x000 0x0 0x0
-#define MX6DL_PAD_SD4_CMD__NAND_RE_B               0x33c 0x724 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_CMD__UART3_TX_DATA           0x33c 0x724 0x000 0x2 0x0
-#define MX6DL_PAD_SD4_CMD__UART3_RX_DATA           0x33c 0x724 0x90c 0x2 0x3
-#define MX6DL_PAD_SD4_CMD__GPIO7_IO09              0x33c 0x724 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_DAT0__SD4_DATA0              0x340 0x728 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_DAT0__NAND_DQS               0x340 0x728 0x000 0x2 0x0
-#define MX6DL_PAD_SD4_DAT0__GPIO2_IO08             0x340 0x728 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_DAT1__SD4_DATA1              0x344 0x72c 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_DAT1__PWM3_OUT               0x344 0x72c 0x000 0x2 0x0
-#define MX6DL_PAD_SD4_DAT1__GPIO2_IO09             0x344 0x72c 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_DAT2__SD4_DATA2              0x348 0x730 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_DAT2__PWM4_OUT               0x348 0x730 0x000 0x2 0x0
-#define MX6DL_PAD_SD4_DAT2__GPIO2_IO10             0x348 0x730 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_DAT3__SD4_DATA3              0x34c 0x734 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_DAT3__GPIO2_IO11             0x34c 0x734 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_DAT4__SD4_DATA4              0x350 0x738 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_DAT4__UART2_RX_DATA          0x350 0x738 0x904 0x2 0x6
-#define MX6DL_PAD_SD4_DAT4__UART2_TX_DATA          0x350 0x738 0x000 0x2 0x0
-#define MX6DL_PAD_SD4_DAT4__GPIO2_IO12             0x350 0x738 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_DAT5__SD4_DATA5              0x354 0x73c 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_DAT5__UART2_RTS_B            0x354 0x73c 0x900 0x2 0x4
-#define MX6DL_PAD_SD4_DAT5__UART2_CTS_B            0x354 0x73c 0x000 0x2 0x0
-#define MX6DL_PAD_SD4_DAT5__GPIO2_IO13             0x354 0x73c 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_DAT6__SD4_DATA6              0x358 0x740 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_DAT6__UART2_CTS_B            0x358 0x740 0x000 0x2 0x0
-#define MX6DL_PAD_SD4_DAT6__UART2_RTS_B            0x358 0x740 0x900 0x2 0x5
-#define MX6DL_PAD_SD4_DAT6__GPIO2_IO14             0x358 0x740 0x000 0x5 0x0
-#define MX6DL_PAD_SD4_DAT7__SD4_DATA7              0x35c 0x744 0x000 0x1 0x0
-#define MX6DL_PAD_SD4_DAT7__UART2_TX_DATA          0x35c 0x744 0x000 0x2 0x0
-#define MX6DL_PAD_SD4_DAT7__UART2_RX_DATA          0x35c 0x744 0x904 0x2 0x7
-#define MX6DL_PAD_SD4_DAT7__GPIO2_IO15             0x35c 0x744 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10     0x04c 0x360 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT10__AUD3_RXC             0x04c 0x360 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO          0x04c 0x360 0x7f8 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA        0x04c 0x360 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA        0x04c 0x360 0x8fc 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28           0x04c 0x360 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07          0x04c 0x360 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11     0x050 0x364 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT11__AUD3_RXFS            0x050 0x364 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT11__ECSPI2_SS0           0x050 0x364 0x800 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA        0x050 0x364 0x8fc 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA        0x050 0x364 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29           0x050 0x364 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08          0x050 0x364 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12     0x054 0x368 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT12__EIM_DATA08           0x054 0x368 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA        0x054 0x368 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT12__UART4_RX_DATA        0x054 0x368 0x914 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30           0x054 0x368 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09          0x054 0x368 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13     0x058 0x36c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT13__EIM_DATA09           0x058 0x36c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA        0x058 0x36c 0x914 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT13__UART4_TX_DATA        0x058 0x36c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31           0x058 0x36c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10          0x058 0x36c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14     0x05c 0x370 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT14__EIM_DATA10           0x05c 0x370 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA        0x05c 0x370 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT14__UART5_RX_DATA        0x05c 0x370 0x91c 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00           0x05c 0x370 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11          0x05c 0x370 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15     0x060 0x374 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT15__EIM_DATA11           0x060 0x374 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA        0x060 0x374 0x91c 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT15__UART5_TX_DATA        0x060 0x374 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01           0x060 0x374 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12          0x060 0x374 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16     0x064 0x378 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT16__EIM_DATA12           0x064 0x378 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B          0x064 0x378 0x910 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT16__UART4_CTS_B          0x064 0x378 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02           0x064 0x378 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13          0x064 0x378 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17     0x068 0x37c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT17__EIM_DATA13           0x068 0x37c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B          0x068 0x37c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT17__UART4_RTS_B          0x068 0x37c 0x910 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03           0x068 0x37c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14          0x068 0x37c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18     0x06c 0x380 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT18__EIM_DATA14           0x06c 0x380 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B          0x06c 0x380 0x918 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT18__UART5_CTS_B          0x06c 0x380 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04           0x06c 0x380 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15          0x06c 0x380 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19     0x070 0x384 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT19__EIM_DATA15           0x070 0x384 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B          0x070 0x384 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT19__UART5_RTS_B          0x070 0x384 0x918 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05           0x070 0x384 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04      0x074 0x388 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT4__EIM_DATA02            0x074 0x388 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK           0x074 0x388 0x7d8 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT4__KEY_COL5              0x074 0x388 0x8c0 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT4__AUD3_TXC              0x074 0x388 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22            0x074 0x388 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01           0x074 0x388 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05      0x078 0x38c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT5__EIM_DATA03            0x078 0x38c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI           0x078 0x38c 0x7e0 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT5__KEY_ROW5              0x078 0x38c 0x8cc 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT5__AUD3_TXD              0x078 0x38c 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23            0x078 0x38c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02           0x078 0x38c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06      0x07c 0x390 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT6__EIM_DATA04            0x07c 0x390 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO           0x07c 0x390 0x7dc 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT6__KEY_COL6              0x07c 0x390 0x8c4 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS             0x07c 0x390 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24            0x07c 0x390 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03           0x07c 0x390 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07      0x080 0x394 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT7__EIM_DATA05            0x080 0x394 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT7__ECSPI1_SS0            0x080 0x394 0x7e4 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT7__KEY_ROW6              0x080 0x394 0x8d0 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT7__AUD3_RXD              0x080 0x394 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25            0x080 0x394 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04           0x080 0x394 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08      0x084 0x398 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT8__EIM_DATA06            0x084 0x398 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK           0x084 0x398 0x7f4 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT8__KEY_COL7              0x084 0x398 0x8c8 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT8__I2C1_SDA              0x084 0x398 0x86c 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26            0x084 0x398 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05           0x084 0x398 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09      0x088 0x39c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT9__EIM_DATA07            0x088 0x39c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI           0x088 0x39c 0x7fc 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT9__KEY_ROW7              0x088 0x39c 0x8d4 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT9__I2C1_SCL              0x088 0x39c 0x868 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27            0x088 0x39c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06           0x088 0x39c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN  0x08c 0x3a0 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00         0x08c 0x3a0 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20         0x08c 0x3a0 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK      0x08c 0x3a0 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC       0x090 0x3a4 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1             0x090 0x3a4 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19            0x090 0x3a4 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL         0x090 0x3a4 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK    0x094 0x3a8 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18          0x094 0x3a8 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO          0x094 0x3a8 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC      0x098 0x3ac 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01           0x098 0x3ac 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21           0x098 0x3ac 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00          0x098 0x3ac 0x000 0x7 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK  0x09c 0x3b0 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__LCD_CLK            0x09c 0x3b0 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16         0x09c 0x3b0 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__LCD_WR_RWN         0x09c 0x3b0 0x000 0x8 0x0
+#define MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15        0x0a0 0x3b4 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN15__LCD_ENABLE            0x0a0 0x3b4 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN15__AUD6_TXC              0x0a0 0x3b4 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN15__GPIO4_IO17            0x0a0 0x3b4 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN15__LCD_RD_E              0x0a0 0x3b4 0x000 0x8 0x0
+#define MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02         0x0a4 0x3b8 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN2__LCD_HSYNC              0x0a4 0x3b8 0x8d8 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN2__AUD6_TXD               0x0a4 0x3b8 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN2__GPIO4_IO18             0x0a4 0x3b8 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN2__LCD_RS                 0x0a4 0x3b8 0x000 0x8 0x0
+#define MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03         0x0a8 0x3bc 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN3__LCD_VSYNC              0x0a8 0x3bc 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN3__AUD6_TXFS              0x0a8 0x3bc 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN3__GPIO4_IO19             0x0a8 0x3bc 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN3__LCD_CS                 0x0a8 0x3bc 0x000 0x8 0x0
+#define MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04         0x0ac 0x3c0 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN4__LCD_BUSY               0x0ac 0x3c0 0x8d8 0x1 0x1
+#define MX6QDL_PAD_DI0_PIN4__AUD6_RXD               0x0ac 0x3c0 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN4__SD1_WP                 0x0ac 0x3c0 0x92c 0x3 0x0
+#define MX6QDL_PAD_DI0_PIN4__GPIO4_IO20             0x0ac 0x3c0 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN4__LCD_RESET              0x0ac 0x3c0 0x000 0x8 0x0
+#define MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00    0x0b0 0x3c4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT0__LCD_DATA00           0x0b0 0x3c4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK          0x0b0 0x3c4 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21           0x0b0 0x3c4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01    0x0b4 0x3c8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT1__LCD_DATA01           0x0b4 0x3c8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI          0x0b4 0x3c8 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22           0x0b4 0x3c8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10   0x0b8 0x3cc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT10__LCD_DATA10          0x0b8 0x3cc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31          0x0b8 0x3cc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11   0x0bc 0x3d0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT11__LCD_DATA11          0x0bc 0x3d0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05          0x0bc 0x3d0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12   0x0c0 0x3d4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT12__LCD_DATA12          0x0c0 0x3d4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06          0x0c0 0x3d4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13   0x0c4 0x3d8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT13__LCD_DATA13          0x0c4 0x3d8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS           0x0c4 0x3d8 0x7bc 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07          0x0c4 0x3d8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14   0x0c8 0x3dc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT14__LCD_DATA14          0x0c8 0x3dc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT14__AUD5_RXC            0x0c8 0x3dc 0x7b8 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08          0x0c8 0x3dc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15   0x0cc 0x3e0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT15__LCD_DATA15          0x0cc 0x3e0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT15__ECSPI1_SS1          0x0cc 0x3e0 0x7e8 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT15__ECSPI2_SS1          0x0cc 0x3e0 0x804 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09          0x0cc 0x3e0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16   0x0d0 0x3e4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT16__LCD_DATA16          0x0d0 0x3e4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI         0x0d0 0x3e4 0x7fc 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT16__AUD5_TXC            0x0d0 0x3e4 0x7c0 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0     0x0d0 0x3e4 0x8e8 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10          0x0d0 0x3e4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17   0x0d4 0x3e8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT17__LCD_DATA17          0x0d4 0x3e8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO         0x0d4 0x3e8 0x7f8 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT17__AUD5_TXD            0x0d4 0x3e8 0x7b4 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1     0x0d4 0x3e8 0x8ec 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11          0x0d4 0x3e8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18   0x0d8 0x3ec 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT18__LCD_DATA18          0x0d8 0x3ec 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT18__ECSPI2_SS0          0x0d8 0x3ec 0x800 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS           0x0d8 0x3ec 0x7c4 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT18__AUD4_RXFS           0x0d8 0x3ec 0x7a4 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12          0x0d8 0x3ec 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT18__EIM_CS2_B           0x0d8 0x3ec 0x000 0x7 0x0
+#define MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19   0x0dc 0x3f0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT19__LCD_DATA19          0x0dc 0x3f0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK         0x0dc 0x3f0 0x7f4 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT19__AUD5_RXD            0x0dc 0x3f0 0x7b0 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT19__AUD4_RXC            0x0dc 0x3f0 0x7a0 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13          0x0dc 0x3f0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT19__EIM_CS3_B           0x0dc 0x3f0 0x000 0x7 0x0
+#define MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02    0x0e0 0x3f4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT2__LCD_DATA02           0x0e0 0x3f4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO          0x0e0 0x3f4 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23           0x0e0 0x3f4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20   0x0e4 0x3f8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT20__LCD_DATA20          0x0e4 0x3f8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT20__ECSPI1_SCLK         0x0e4 0x3f8 0x7d8 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT20__AUD4_TXC            0x0e4 0x3f8 0x7a8 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14          0x0e4 0x3f8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21   0x0e8 0x3fc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT21__LCD_DATA21          0x0e8 0x3fc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT21__ECSPI1_MOSI         0x0e8 0x3fc 0x7e0 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT21__AUD4_TXD            0x0e8 0x3fc 0x79c 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15          0x0e8 0x3fc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22   0x0ec 0x400 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT22__LCD_DATA22          0x0ec 0x400 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT22__ECSPI1_MISO         0x0ec 0x400 0x7dc 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS           0x0ec 0x400 0x7ac 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16          0x0ec 0x400 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23   0x0f0 0x404 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT23__LCD_DATA23          0x0f0 0x404 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT23__ECSPI1_SS0          0x0f0 0x404 0x7e4 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT23__AUD4_RXD            0x0f0 0x404 0x798 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17          0x0f0 0x404 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03    0x0f4 0x408 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT3__LCD_DATA03           0x0f4 0x408 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT3__ECSPI3_SS0           0x0f4 0x408 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24           0x0f4 0x408 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04    0x0f8 0x40c 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT4__LCD_DATA04           0x0f8 0x40c 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT4__ECSPI3_SS1           0x0f8 0x40c 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25           0x0f8 0x40c 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05    0x0fc 0x410 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT5__LCD_DATA05           0x0fc 0x410 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT5__ECSPI3_SS2           0x0fc 0x410 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT5__AUD6_RXFS            0x0fc 0x410 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26           0x0fc 0x410 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06    0x100 0x414 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT6__LCD_DATA06           0x100 0x414 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT6__ECSPI3_SS3           0x100 0x414 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT6__AUD6_RXC             0x100 0x414 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27           0x100 0x414 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07    0x104 0x418 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT7__LCD_DATA07           0x104 0x418 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT7__ECSPI3_RDY           0x104 0x418 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28           0x104 0x418 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08    0x108 0x41c 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT8__LCD_DATA08           0x108 0x41c 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT8__PWM1_OUT             0x108 0x41c 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT8__WDOG1_B              0x108 0x41c 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29           0x108 0x41c 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09    0x10c 0x420 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT9__LCD_DATA09           0x10c 0x420 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT9__PWM2_OUT             0x10c 0x420 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT9__WDOG2_B              0x10c 0x420 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30           0x10c 0x420 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A16__EIM_ADDR16              0x110 0x4e0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK       0x110 0x4e0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK        0x110 0x4e0 0x8b8 0x2 0x0
+#define MX6QDL_PAD_EIM_A16__GPIO2_IO22              0x110 0x4e0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A16__SRC_BOOT_CFG16          0x110 0x4e0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A16__EPDC_DATA00             0x110 0x4e0 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A17__EIM_ADDR17              0x114 0x4e4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12       0x114 0x4e4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12        0x114 0x4e4 0x890 0x2 0x0
+#define MX6QDL_PAD_EIM_A17__GPIO2_IO21              0x114 0x4e4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A17__SRC_BOOT_CFG17          0x114 0x4e4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A17__EPDC_PWR_STAT           0x114 0x4e4 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A18__EIM_ADDR18              0x118 0x4e8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13       0x118 0x4e8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13        0x118 0x4e8 0x894 0x2 0x0
+#define MX6QDL_PAD_EIM_A18__GPIO2_IO20              0x118 0x4e8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A18__SRC_BOOT_CFG18          0x118 0x4e8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A18__EPDC_PWR_CTRL0          0x118 0x4e8 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A19__EIM_ADDR19              0x11c 0x4ec 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14       0x11c 0x4ec 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14        0x11c 0x4ec 0x898 0x2 0x0
+#define MX6QDL_PAD_EIM_A19__GPIO2_IO19              0x11c 0x4ec 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A19__SRC_BOOT_CFG19          0x11c 0x4ec 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A19__EPDC_PWR_CTRL1          0x11c 0x4ec 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A20__EIM_ADDR20              0x120 0x4f0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15       0x120 0x4f0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15        0x120 0x4f0 0x89c 0x2 0x0
+#define MX6QDL_PAD_EIM_A20__GPIO2_IO18              0x120 0x4f0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A20__SRC_BOOT_CFG20          0x120 0x4f0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A20__EPDC_PWR_CTRL2          0x120 0x4f0 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A21__EIM_ADDR21              0x124 0x4f4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16       0x124 0x4f4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16        0x124 0x4f4 0x8a0 0x2 0x0
+#define MX6QDL_PAD_EIM_A21__GPIO2_IO17              0x124 0x4f4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A21__SRC_BOOT_CFG21          0x124 0x4f4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A21__EPDC_GDCLK              0x124 0x4f4 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A22__EIM_ADDR22              0x128 0x4f8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17       0x128 0x4f8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17        0x128 0x4f8 0x8a4 0x2 0x0
+#define MX6QDL_PAD_EIM_A22__GPIO2_IO16              0x128 0x4f8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A22__SRC_BOOT_CFG22          0x128 0x4f8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A22__EPDC_GDSP               0x128 0x4f8 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A23__EIM_ADDR23              0x12c 0x4fc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18       0x12c 0x4fc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18        0x12c 0x4fc 0x8a8 0x2 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_SISG3              0x12c 0x4fc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A23__GPIO6_IO06              0x12c 0x4fc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A23__SRC_BOOT_CFG23          0x12c 0x4fc 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A23__EPDC_GDOE               0x12c 0x4fc 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A24__EIM_ADDR24              0x130 0x500 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19       0x130 0x500 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19        0x130 0x500 0x8ac 0x2 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_SISG2              0x130 0x500 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A24__GPIO5_IO04              0x130 0x500 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A24__SRC_BOOT_CFG24          0x130 0x500 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A24__EPDC_GDRL               0x130 0x500 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A25__EIM_ADDR25              0x134 0x504 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A25__ECSPI4_SS1              0x134 0x504 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A25__ECSPI2_RDY              0x134 0x504 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_A25__IPU1_DI1_PIN12          0x134 0x504 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_A25__IPU1_DI0_D1_CS          0x134 0x504 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A25__GPIO5_IO02              0x134 0x504 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE        0x134 0x504 0x85c 0x6 0x0
+#define MX6QDL_PAD_EIM_A25__EPDC_DATA15             0x134 0x504 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A25__EIM_ACLK_FREERUN        0x134 0x504 0x000 0x9 0x0
+#define MX6QDL_PAD_EIM_BCLK__EIM_BCLK               0x138 0x508 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_BCLK__IPU1_DI1_PIN16         0x138 0x508 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_BCLK__GPIO6_IO31             0x138 0x508 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_BCLK__EPDC_SDCE9             0x138 0x508 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_CS0__EIM_CS0_B               0x13c 0x50c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_CS0__IPU1_DI1_PIN05          0x13c 0x50c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK             0x13c 0x50c 0x7f4 0x2 0x2
+#define MX6QDL_PAD_EIM_CS0__GPIO2_IO23              0x13c 0x50c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_CS0__EPDC_DATA06             0x13c 0x50c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_CS1__EIM_CS1_B               0x140 0x510 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_CS1__IPU1_DI1_PIN06          0x140 0x510 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI             0x140 0x510 0x7fc 0x2 0x2
+#define MX6QDL_PAD_EIM_CS1__GPIO2_IO24              0x140 0x510 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_CS1__EPDC_DATA08             0x140 0x510 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D16__EIM_DATA16              0x144 0x514 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D16__ECSPI1_SCLK             0x144 0x514 0x7d8 0x1 0x2
+#define MX6QDL_PAD_EIM_D16__IPU1_DI0_PIN05          0x144 0x514 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18        0x144 0x514 0x8a8 0x3 0x1
+#define MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA         0x144 0x514 0x864 0x4 0x0
+#define MX6QDL_PAD_EIM_D16__GPIO3_IO16              0x144 0x514 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D16__I2C2_SDA                0x144 0x514 0x874 0x6 0x0
+#define MX6QDL_PAD_EIM_D16__EPDC_DATA10             0x144 0x514 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D17__EIM_DATA17              0x148 0x518 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D17__ECSPI1_MISO             0x148 0x518 0x7dc 0x1 0x2
+#define MX6QDL_PAD_EIM_D17__IPU1_DI0_PIN06          0x148 0x518 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK        0x148 0x518 0x8b8 0x3 0x1
+#define MX6QDL_PAD_EIM_D17__DCIC1_OUT               0x148 0x518 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D17__GPIO3_IO17              0x148 0x518 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D17__I2C3_SCL                0x148 0x518 0x878 0x6 0x0
+#define MX6QDL_PAD_EIM_D17__EPDC_VCOM0              0x148 0x518 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D18__EIM_DATA18              0x14c 0x51c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D18__ECSPI1_MOSI             0x14c 0x51c 0x7e0 0x1 0x2
+#define MX6QDL_PAD_EIM_D18__IPU1_DI0_PIN07          0x14c 0x51c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17        0x14c 0x51c 0x8a4 0x3 0x1
+#define MX6QDL_PAD_EIM_D18__IPU1_DI1_D0_CS          0x14c 0x51c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D18__GPIO3_IO18              0x14c 0x51c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D18__I2C3_SDA                0x14c 0x51c 0x87c 0x6 0x0
+#define MX6QDL_PAD_EIM_D18__EPDC_VCOM1              0x14c 0x51c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D19__EIM_DATA19              0x150 0x520 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D19__ECSPI1_SS1              0x150 0x520 0x7e8 0x1 0x1
+#define MX6QDL_PAD_EIM_D19__IPU1_DI0_PIN08          0x150 0x520 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16        0x150 0x520 0x8a0 0x3 0x1
+#define MX6QDL_PAD_EIM_D19__UART1_CTS_B             0x150 0x520 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D19__UART1_RTS_B             0x150 0x520 0x8f8 0x4 0x0
+#define MX6QDL_PAD_EIM_D19__GPIO3_IO19              0x150 0x520 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D19__EPIT1_OUT               0x150 0x520 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D19__EPDC_DATA12             0x150 0x520 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D20__EIM_DATA20              0x154 0x524 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D20__ECSPI4_SS0              0x154 0x524 0x808 0x1 0x0
+#define MX6QDL_PAD_EIM_D20__IPU1_DI0_PIN16          0x154 0x524 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15        0x154 0x524 0x89c 0x3 0x1
+#define MX6QDL_PAD_EIM_D20__UART1_RTS_B             0x154 0x524 0x8f8 0x4 0x1
+#define MX6QDL_PAD_EIM_D20__UART1_CTS_B             0x154 0x524 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D20__GPIO3_IO20              0x154 0x524 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D20__EPIT2_OUT               0x154 0x524 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D21__EIM_DATA21              0x158 0x528 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D21__ECSPI4_SCLK             0x158 0x528 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D21__IPU1_DI0_PIN17          0x158 0x528 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D21__IPU1_CSI1_DATA11        0x158 0x528 0x88c 0x3 0x0
+#define MX6QDL_PAD_EIM_D21__USB_OTG_OC              0x158 0x528 0x920 0x4 0x0
+#define MX6QDL_PAD_EIM_D21__GPIO3_IO21              0x158 0x528 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D21__I2C1_SCL                0x158 0x528 0x868 0x6 0x1
+#define MX6QDL_PAD_EIM_D21__SPDIF_IN                0x158 0x528 0x8f0 0x7 0x0
+#define MX6QDL_PAD_EIM_D22__EIM_DATA22              0x15c 0x52c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D22__ECSPI4_MISO             0x15c 0x52c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D22__IPU1_DI0_PIN01          0x15c 0x52c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D22__IPU1_CSI1_DATA10        0x15c 0x52c 0x888 0x3 0x0
+#define MX6QDL_PAD_EIM_D22__USB_OTG_PWR             0x15c 0x52c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D22__GPIO3_IO22              0x15c 0x52c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D22__SPDIF_OUT               0x15c 0x52c 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D22__EPDC_SDCE6              0x15c 0x52c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D23__EIM_DATA23              0x160 0x530 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI0_D0_CS          0x160 0x530 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D23__UART3_CTS_B             0x160 0x530 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D23__UART3_RTS_B             0x160 0x530 0x908 0x2 0x0
+#define MX6QDL_PAD_EIM_D23__UART1_DCD_B             0x160 0x530 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_CSI1_DATA_EN       0x160 0x530 0x8b0 0x4 0x0
+#define MX6QDL_PAD_EIM_D23__GPIO3_IO23              0x160 0x530 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN02          0x160 0x530 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN14          0x160 0x530 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D23__EPDC_DATA11             0x160 0x530 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D24__EIM_DATA24              0x164 0x534 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI4_SS2              0x164 0x534 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D24__UART3_TX_DATA           0x164 0x534 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D24__UART3_RX_DATA           0x164 0x534 0x90c 0x2 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI1_SS2              0x164 0x534 0x7ec 0x3 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI2_SS2              0x164 0x534 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D24__GPIO3_IO24              0x164 0x534 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D24__AUD5_RXFS               0x164 0x534 0x7bc 0x6 0x1
+#define MX6QDL_PAD_EIM_D24__UART1_DTR_B             0x164 0x534 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D24__EPDC_SDCE7              0x164 0x534 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D25__EIM_DATA25              0x168 0x538 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI4_SS3              0x168 0x538 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D25__UART3_RX_DATA           0x168 0x538 0x90c 0x2 0x1
+#define MX6QDL_PAD_EIM_D25__UART3_TX_DATA           0x168 0x538 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI1_SS3              0x168 0x538 0x7f0 0x3 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI2_SS3              0x168 0x538 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D25__GPIO3_IO25              0x168 0x538 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D25__AUD5_RXC                0x168 0x538 0x7b8 0x6 0x1
+#define MX6QDL_PAD_EIM_D25__UART1_DSR_B             0x168 0x538 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D25__EPDC_SDCE8              0x168 0x538 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D26__EIM_DATA26              0x16c 0x53c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_DI1_PIN11          0x16c 0x53c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_CSI0_DATA01        0x16c 0x53c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14        0x16c 0x53c 0x898 0x3 0x1
+#define MX6QDL_PAD_EIM_D26__UART2_TX_DATA           0x16c 0x53c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D26__UART2_RX_DATA           0x16c 0x53c 0x904 0x4 0x0
+#define MX6QDL_PAD_EIM_D26__GPIO3_IO26              0x16c 0x53c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_SISG2              0x16c 0x53c 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22       0x16c 0x53c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D26__EPDC_SDOED              0x16c 0x53c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D27__EIM_DATA27              0x170 0x540 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_DI1_PIN13          0x170 0x540 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_CSI0_DATA00        0x170 0x540 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13        0x170 0x540 0x894 0x3 0x1
+#define MX6QDL_PAD_EIM_D27__UART2_RX_DATA           0x170 0x540 0x904 0x4 0x1
+#define MX6QDL_PAD_EIM_D27__UART2_TX_DATA           0x170 0x540 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D27__GPIO3_IO27              0x170 0x540 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_SISG3              0x170 0x540 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23       0x170 0x540 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D27__EPDC_SDOE               0x170 0x540 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D28__EIM_DATA28              0x174 0x544 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D28__I2C1_SDA                0x174 0x544 0x86c 0x1 0x1
+#define MX6QDL_PAD_EIM_D28__ECSPI4_MOSI             0x174 0x544 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_CSI1_DATA12        0x174 0x544 0x890 0x3 0x1
+#define MX6QDL_PAD_EIM_D28__UART2_CTS_B             0x174 0x544 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_RTS_B             0x174 0x544 0x900 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B         0x174 0x544 0x900 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_DTE_RTS_B         0x174 0x544 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__GPIO3_IO28              0x174 0x544 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_EXT_TRIG           0x174 0x544 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_DI0_PIN13          0x174 0x544 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D28__EPDC_PWR_CTRL3          0x174 0x544 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D29__EIM_DATA29              0x178 0x548 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_DI1_PIN15          0x178 0x548 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D29__ECSPI4_SS0              0x178 0x548 0x808 0x2 0x1
+#define MX6QDL_PAD_EIM_D29__UART2_RTS_B             0x178 0x548 0x900 0x4 0x1
+#define MX6QDL_PAD_EIM_D29__UART2_CTS_B             0x178 0x548 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B         0x178 0x548 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B         0x178 0x548 0x900 0x4 0x1
+#define MX6QDL_PAD_EIM_D29__GPIO3_IO29              0x178 0x548 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC         0x178 0x548 0x8bc 0x6 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14          0x178 0x548 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D29__EPDC_PWR_WAKE           0x178 0x548 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D30__EIM_DATA30              0x17c 0x54c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21       0x17c 0x54c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_DI0_PIN11          0x17c 0x54c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_CSI0_DATA03        0x17c 0x54c 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D30__UART3_CTS_B             0x17c 0x54c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D30__UART3_RTS_B             0x17c 0x54c 0x908 0x4 0x1
+#define MX6QDL_PAD_EIM_D30__GPIO3_IO30              0x17c 0x54c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D30__USB_H1_OC               0x17c 0x54c 0x924 0x6 0x0
+#define MX6QDL_PAD_EIM_D30__EPDC_SDOEZ              0x17c 0x54c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D31__EIM_DATA31              0x180 0x550 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20       0x180 0x550 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_DI0_PIN12          0x180 0x550 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_CSI0_DATA02        0x180 0x550 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D31__UART3_RTS_B             0x180 0x550 0x908 0x4 0x2
+#define MX6QDL_PAD_EIM_D31__UART3_CTS_B             0x180 0x550 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D31__GPIO3_IO31              0x180 0x550 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D31__USB_H1_PWR              0x180 0x550 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D31__EPDC_SDCLK_P            0x180 0x550 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D31__EIM_ACLK_FREERUN        0x180 0x550 0x000 0x9 0x0
+#define MX6QDL_PAD_EIM_DA0__EIM_AD00                0x184 0x554 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09       0x184 0x554 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA0__IPU1_CSI1_DATA09        0x184 0x554 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA0__GPIO3_IO00              0x184 0x554 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA0__SRC_BOOT_CFG00          0x184 0x554 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA0__EPDC_SDCLK_N            0x184 0x554 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA1__EIM_AD01                0x188 0x558 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08       0x188 0x558 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA1__IPU1_CSI1_DATA08        0x188 0x558 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA1__GPIO3_IO01              0x188 0x558 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA1__SRC_BOOT_CFG01          0x188 0x558 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA1__EPDC_SDLE               0x188 0x558 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA10__EIM_AD10               0x18c 0x55c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15         0x18c 0x55c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA10__IPU1_CSI1_DATA_EN      0x18c 0x55c 0x8b0 0x2 0x1
+#define MX6QDL_PAD_EIM_DA10__GPIO3_IO10             0x18c 0x55c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA10__SRC_BOOT_CFG10         0x18c 0x55c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA10__EPDC_DATA01            0x18c 0x55c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA11__EIM_AD11               0x190 0x560 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02         0x190 0x560 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA11__IPU1_CSI1_HSYNC        0x190 0x560 0x8b4 0x2 0x0
+#define MX6QDL_PAD_EIM_DA11__GPIO3_IO11             0x190 0x560 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA11__SRC_BOOT_CFG11         0x190 0x560 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA11__EPDC_DATA03            0x190 0x560 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA12__EIM_AD12               0x194 0x564 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03         0x194 0x564 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA12__IPU1_CSI1_VSYNC        0x194 0x564 0x8bc 0x2 0x1
+#define MX6QDL_PAD_EIM_DA12__GPIO3_IO12             0x194 0x564 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA12__SRC_BOOT_CFG12         0x194 0x564 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA12__EPDC_DATA02            0x194 0x564 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA13__EIM_AD13               0x198 0x568 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA13__IPU1_DI1_D0_CS         0x198 0x568 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA13__GPIO3_IO13             0x198 0x568 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA13__SRC_BOOT_CFG13         0x198 0x568 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA13__EPDC_DATA13            0x198 0x568 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA14__EIM_AD14               0x19c 0x56c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA14__IPU1_DI1_D1_CS         0x19c 0x56c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA14__GPIO3_IO14             0x19c 0x56c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA14__SRC_BOOT_CFG14         0x19c 0x56c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA14__EPDC_DATA14            0x19c 0x56c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA15__EIM_AD15               0x1a0 0x570 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN01         0x1a0 0x570 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN04         0x1a0 0x570 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA15__GPIO3_IO15             0x1a0 0x570 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA15__SRC_BOOT_CFG15         0x1a0 0x570 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA15__EPDC_DATA09            0x1a0 0x570 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA2__EIM_AD02                0x1a4 0x574 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07       0x1a4 0x574 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA2__IPU1_CSI1_DATA07        0x1a4 0x574 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA2__GPIO3_IO02              0x1a4 0x574 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA2__SRC_BOOT_CFG02          0x1a4 0x574 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA2__EPDC_BDR0               0x1a4 0x574 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA3__EIM_AD03                0x1a8 0x578 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06       0x1a8 0x578 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA3__IPU1_CSI1_DATA06        0x1a8 0x578 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA3__GPIO3_IO03              0x1a8 0x578 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA3__SRC_BOOT_CFG03          0x1a8 0x578 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA3__EPDC_BDR1               0x1a8 0x578 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA4__EIM_AD04                0x1ac 0x57c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05       0x1ac 0x57c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA4__IPU1_CSI1_DATA05        0x1ac 0x57c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA4__GPIO3_IO04              0x1ac 0x57c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA4__SRC_BOOT_CFG04          0x1ac 0x57c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA4__EPDC_SDCE0              0x1ac 0x57c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA5__EIM_AD05                0x1b0 0x580 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04       0x1b0 0x580 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA5__IPU1_CSI1_DATA04        0x1b0 0x580 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA5__GPIO3_IO05              0x1b0 0x580 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA5__SRC_BOOT_CFG05          0x1b0 0x580 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA5__EPDC_SDCE1              0x1b0 0x580 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA6__EIM_AD06                0x1b4 0x584 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03       0x1b4 0x584 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA6__IPU1_CSI1_DATA03        0x1b4 0x584 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA6__GPIO3_IO06              0x1b4 0x584 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA6__SRC_BOOT_CFG06          0x1b4 0x584 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA6__EPDC_SDCE2              0x1b4 0x584 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA7__EIM_AD07                0x1b8 0x588 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02       0x1b8 0x588 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA7__IPU1_CSI1_DATA02        0x1b8 0x588 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA7__GPIO3_IO07              0x1b8 0x588 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA7__SRC_BOOT_CFG07          0x1b8 0x588 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA7__EPDC_SDCE3              0x1b8 0x588 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA8__EIM_AD08                0x1bc 0x58c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01       0x1bc 0x58c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA8__IPU1_CSI1_DATA01        0x1bc 0x58c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA8__GPIO3_IO08              0x1bc 0x58c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA8__SRC_BOOT_CFG08          0x1bc 0x58c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA8__EPDC_SDCE4              0x1bc 0x58c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA9__EIM_AD09                0x1c0 0x590 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00       0x1c0 0x590 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA9__IPU1_CSI1_DATA00        0x1c0 0x590 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA9__GPIO3_IO09              0x1c0 0x590 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA9__SRC_BOOT_CFG09          0x1c0 0x590 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA9__EPDC_SDCE5              0x1c0 0x590 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB0__EIM_EB0_B               0x1c4 0x594 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11       0x1c4 0x594 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB0__IPU1_CSI1_DATA11        0x1c4 0x594 0x88c 0x2 0x1
+#define MX6QDL_PAD_EIM_EB0__CCM_PMIC_READY          0x1c4 0x594 0x7d4 0x4 0x0
+#define MX6QDL_PAD_EIM_EB0__GPIO2_IO28              0x1c4 0x594 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB0__SRC_BOOT_CFG27          0x1c4 0x594 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB0__EPDC_PWR_COM            0x1c4 0x594 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB1__EIM_EB1_B               0x1c8 0x598 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10       0x1c8 0x598 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB1__IPU1_CSI1_DATA10        0x1c8 0x598 0x888 0x2 0x1
+#define MX6QDL_PAD_EIM_EB1__GPIO2_IO29              0x1c8 0x598 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB1__SRC_BOOT_CFG28          0x1c8 0x598 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB1__EPDC_SDSHR              0x1c8 0x598 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB2__EIM_EB2_B               0x1cc 0x59c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB2__ECSPI1_SS0              0x1cc 0x59c 0x7e4 0x1 0x2
+#define MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19        0x1cc 0x59c 0x8ac 0x3 0x1
+#define MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL         0x1cc 0x59c 0x860 0x4 0x0
+#define MX6QDL_PAD_EIM_EB2__GPIO2_IO30              0x1cc 0x59c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB2__I2C2_SCL                0x1cc 0x59c 0x870 0x6 0x0
+#define MX6QDL_PAD_EIM_EB2__SRC_BOOT_CFG30          0x1cc 0x59c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB2__EPDC_DATA05             0x1cc 0x59c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB3__EIM_EB3_B               0x1d0 0x5a0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB3__ECSPI4_RDY              0x1d0 0x5a0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB3__UART3_RTS_B             0x1d0 0x5a0 0x908 0x2 0x3
+#define MX6QDL_PAD_EIM_EB3__UART3_CTS_B             0x1d0 0x5a0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_EB3__UART1_RI_B              0x1d0 0x5a0 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC         0x1d0 0x5a0 0x8b4 0x4 0x1
+#define MX6QDL_PAD_EIM_EB3__GPIO2_IO31              0x1d0 0x5a0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB3__IPU1_DI1_PIN03          0x1d0 0x5a0 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_EB3__SRC_BOOT_CFG31          0x1d0 0x5a0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB3__EPDC_SDCE0              0x1d0 0x5a0 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB3__EIM_ACLK_FREERUN        0x1d0 0x5a0 0x000 0x9 0x0
+#define MX6QDL_PAD_EIM_LBA__EIM_LBA_B               0x1d4 0x5a4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_LBA__IPU1_DI1_PIN17          0x1d4 0x5a4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_LBA__ECSPI2_SS1              0x1d4 0x5a4 0x804 0x2 0x1
+#define MX6QDL_PAD_EIM_LBA__GPIO2_IO27              0x1d4 0x5a4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_LBA__SRC_BOOT_CFG26          0x1d4 0x5a4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_LBA__EPDC_DATA04             0x1d4 0x5a4 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_OE__EIM_OE_B                 0x1d8 0x5a8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_OE__IPU1_DI1_PIN07           0x1d8 0x5a8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_OE__ECSPI2_MISO              0x1d8 0x5a8 0x7f8 0x2 0x2
+#define MX6QDL_PAD_EIM_OE__GPIO2_IO25               0x1d8 0x5a8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_OE__EPDC_PWR_IRQ             0x1d8 0x5a8 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_RW__EIM_RW                   0x1dc 0x5ac 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_RW__IPU1_DI1_PIN08           0x1dc 0x5ac 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_RW__ECSPI2_SS0               0x1dc 0x5ac 0x800 0x2 0x2
+#define MX6QDL_PAD_EIM_RW__GPIO2_IO26               0x1dc 0x5ac 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_RW__SRC_BOOT_CFG29           0x1dc 0x5ac 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_RW__EPDC_DATA07              0x1dc 0x5ac 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B             0x1e0 0x5b0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_WAIT__EIM_DTACK_B            0x1e0 0x5b0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_WAIT__GPIO5_IO00             0x1e0 0x5b0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_WAIT__SRC_BOOT_CFG25         0x1e0 0x5b0 0x000 0x7 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN          0x1e4 0x5b4 0x828 0x1 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK         0x1e4 0x5b4 0x840 0x2 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK       0x1e4 0x5b4 0x8f4 0x3 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25          0x1e4 0x5b4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDC__MLB_DATA               0x1e8 0x5b8 0x8e0 0x0 0x0
+#define MX6QDL_PAD_ENET_MDC__ENET_MDC               0x1e8 0x5b8 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0           0x1e8 0x5b8 0x858 0x2 0x0
+#define MX6QDL_PAD_ENET_MDC__ENET_1588_EVENT1_IN    0x1e8 0x5b8 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_MDC__GPIO1_IO31             0x1e8 0x5b8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDIO__ENET_MDIO             0x1ec 0x5bc 0x810 0x1 0x0
+#define MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK           0x1ec 0x5bc 0x83c 0x2 0x0
+#define MX6QDL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT  0x1ec 0x5bc 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_MDIO__GPIO1_IO22            0x1ec 0x5bc 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDIO__SPDIF_LOCK            0x1ec 0x5bc 0x000 0x6 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK        0x1f0 0x5c0 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS         0x1f0 0x5c0 0x82c 0x2 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23         0x1f0 0x5c0 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK       0x1f0 0x5c0 0x000 0x6 0x0
+#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID           0x1f4 0x5c4 0x790 0x0 0x0
+#define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER           0x1f4 0x5c4 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK       0x1f4 0x5c4 0x834 0x2 0x0
+#define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN             0x1f4 0x5c4 0x8f0 0x3 0x1
+#define MX6QDL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1f4 0x5c4 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24           0x1f4 0x5c4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0         0x1f8 0x5c8 0x818 0x1 0x0
+#define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK        0x1f8 0x5c8 0x838 0x2 0x0
+#define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT             0x1f8 0x5c8 0x000 0x3 0x0
+#define MX6QDL_PAD_ENET_RXD0__GPIO1_IO27            0x1f8 0x5c8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD1__MLB_SIG               0x1fc 0x5cc 0x8e4 0x0 0x0
+#define MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1         0x1fc 0x5cc 0x81c 0x1 0x0
+#define MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS            0x1fc 0x5cc 0x830 0x2 0x0
+#define MX6QDL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT  0x1fc 0x5cc 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_RXD1__GPIO1_IO26            0x1fc 0x5cc 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN           0x200 0x5d0 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2         0x200 0x5d0 0x850 0x2 0x0
+#define MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28           0x200 0x5d0 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TX_EN__I2C4_SCL             0x200 0x5d0 0x880 0x9 0x0
+#define MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0         0x204 0x5d4 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1          0x204 0x5d4 0x854 0x2 0x0
+#define MX6QDL_PAD_ENET_TXD0__GPIO1_IO30            0x204 0x5d4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TXD1__MLB_CLK               0x208 0x5d8 0x8dc 0x0 0x0
+#define MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1         0x208 0x5d8 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3          0x208 0x5d8 0x84c 0x2 0x0
+#define MX6QDL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN   0x208 0x5d8 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_TXD1__GPIO1_IO29            0x208 0x5d8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TXD1__I2C4_SDA              0x208 0x5d8 0x884 0x9 0x0
+#define MX6QDL_PAD_GPIO_0__CCM_CLKO1                0x20c 0x5dc 0x000 0x0 0x0
+#define MX6QDL_PAD_GPIO_0__KEY_COL5                 0x20c 0x5dc 0x8c0 0x2 0x1
+#define MX6QDL_PAD_GPIO_0__ASRC_EXT_CLK             0x20c 0x5dc 0x794 0x3 0x0
+#define MX6QDL_PAD_GPIO_0__EPIT1_OUT                0x20c 0x5dc 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_0__GPIO1_IO00               0x20c 0x5dc 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_0__USB_H1_PWR               0x20c 0x5dc 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_0__SNVS_VIO_5               0x20c 0x5dc 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK              0x210 0x5e0 0x83c 0x0 0x1
+#define MX6QDL_PAD_GPIO_1__WDOG2_B                  0x210 0x5e0 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_1__KEY_ROW5                 0x210 0x5e0 0x8cc 0x2 0x1
+#define MX6QDL_PAD_GPIO_1__USB_OTG_ID               0x210 0x5e0 0x790 0x3 0x1
+#define MX6QDL_PAD_GPIO_1__PWM2_OUT                 0x210 0x5e0 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_1__GPIO1_IO01               0x210 0x5e0 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_1__SD1_CD_B                 0x210 0x5e0 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_16__ESAI_TX3_RX2            0x214 0x5e4 0x850 0x0 0x1
+#define MX6QDL_PAD_GPIO_16__ENET_1588_EVENT2_IN     0x214 0x5e4 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_16__ENET_REF_CLK            0x214 0x5e4 0x80c 0x2 0x0
+#define MX6QDL_PAD_GPIO_16__SD1_LCTL                0x214 0x5e4 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_16__SPDIF_IN                0x214 0x5e4 0x8f0 0x4 0x2
+#define MX6QDL_PAD_GPIO_16__GPIO7_IO11              0x214 0x5e4 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_16__I2C3_SDA                0x214 0x5e4 0x87c 0x6 0x1
+#define MX6QDL_PAD_GPIO_16__JTAG_DE_B               0x214 0x5e4 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_17__ESAI_TX0                0x218 0x5e8 0x844 0x0 0x0
+#define MX6QDL_PAD_GPIO_17__ENET_1588_EVENT3_IN     0x218 0x5e8 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_17__CCM_PMIC_READY          0x218 0x5e8 0x7d4 0x2 0x1
+#define MX6QDL_PAD_GPIO_17__SDMA_EXT_EVENT0         0x218 0x5e8 0x8e8 0x3 0x1
+#define MX6QDL_PAD_GPIO_17__SPDIF_OUT               0x218 0x5e8 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_17__GPIO7_IO12              0x218 0x5e8 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_18__ESAI_TX1                0x21c 0x5ec 0x848 0x0 0x0
+#define MX6QDL_PAD_GPIO_18__ENET_RX_CLK             0x21c 0x5ec 0x814 0x1 0x0
+#define MX6QDL_PAD_GPIO_18__SD3_VSELECT             0x21c 0x5ec 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_18__SDMA_EXT_EVENT1         0x21c 0x5ec 0x8ec 0x3 0x1
+#define MX6QDL_PAD_GPIO_18__ASRC_EXT_CLK            0x21c 0x5ec 0x794 0x4 0x1
+#define MX6QDL_PAD_GPIO_18__GPIO7_IO13              0x21c 0x5ec 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_18__SNVS_VIO_5_CTL          0x21c 0x5ec 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_19__KEY_COL5                0x220 0x5f0 0x8c0 0x0 0x2
+#define MX6QDL_PAD_GPIO_19__ENET_1588_EVENT0_OUT    0x220 0x5f0 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_19__SPDIF_OUT               0x220 0x5f0 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_19__CCM_CLKO1               0x220 0x5f0 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_19__ECSPI1_RDY              0x220 0x5f0 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_19__GPIO4_IO05              0x220 0x5f0 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_19__ENET_TX_ER              0x220 0x5f0 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_2__ESAI_TX_FS               0x224 0x5f4 0x830 0x0 0x1
+#define MX6QDL_PAD_GPIO_2__KEY_ROW6                 0x224 0x5f4 0x8d0 0x2 0x1
+#define MX6QDL_PAD_GPIO_2__GPIO1_IO02               0x224 0x5f4 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_2__SD2_WP                   0x224 0x5f4 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_2__MLB_DATA                 0x224 0x5f4 0x8e0 0x7 0x1
+#define MX6QDL_PAD_GPIO_3__ESAI_RX_HF_CLK           0x228 0x5f8 0x834 0x0 0x1
+#define MX6QDL_PAD_GPIO_3__I2C3_SCL                 0x228 0x5f8 0x878 0x2 0x1
+#define MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M      0x228 0x5f8 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_3__CCM_CLKO2                0x228 0x5f8 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_3__GPIO1_IO03               0x228 0x5f8 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_3__USB_H1_OC                0x228 0x5f8 0x924 0x6 0x1
+#define MX6QDL_PAD_GPIO_3__MLB_CLK                  0x228 0x5f8 0x8dc 0x7 0x1
+#define MX6QDL_PAD_GPIO_4__ESAI_TX_HF_CLK           0x22c 0x5fc 0x838 0x0 0x1
+#define MX6QDL_PAD_GPIO_4__KEY_COL7                 0x22c 0x5fc 0x8c8 0x2 0x1
+#define MX6QDL_PAD_GPIO_4__GPIO1_IO04               0x22c 0x5fc 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_4__SD2_CD_B                 0x22c 0x5fc 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3             0x230 0x600 0x84c 0x0 0x1
+#define MX6QDL_PAD_GPIO_5__KEY_ROW7                 0x230 0x600 0x8d4 0x2 0x1
+#define MX6QDL_PAD_GPIO_5__CCM_CLKO1                0x230 0x600 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_5__GPIO1_IO05               0x230 0x600 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_5__I2C3_SCL                 0x230 0x600 0x878 0x6 0x2
+#define MX6QDL_PAD_GPIO_5__ARM_EVENTI               0x230 0x600 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK              0x234 0x604 0x840 0x0 0x1
+#define MX6QDL_PAD_GPIO_6__I2C3_SDA                 0x234 0x604 0x87c 0x2 0x2
+#define MX6QDL_PAD_GPIO_6__GPIO1_IO06               0x234 0x604 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_6__SD2_LCTL                 0x234 0x604 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_6__MLB_SIG                  0x234 0x604 0x8e4 0x7 0x1
+#define MX6QDL_PAD_GPIO_7__ESAI_TX4_RX1             0x238 0x608 0x854 0x0 0x1
+#define MX6QDL_PAD_GPIO_7__EPIT1_OUT                0x238 0x608 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_7__FLEXCAN1_TX              0x238 0x608 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_7__UART2_TX_DATA            0x238 0x608 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_7__UART2_RX_DATA            0x238 0x608 0x904 0x4 0x2
+#define MX6QDL_PAD_GPIO_7__GPIO1_IO07               0x238 0x608 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_7__SPDIF_LOCK               0x238 0x608 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_7__USB_OTG_HOST_MODE        0x238 0x608 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_7__I2C4_SCL                 0x238 0x608 0x880 0x8 0x1
+#define MX6QDL_PAD_GPIO_8__ESAI_TX5_RX0             0x23c 0x60c 0x858 0x0 0x1
+#define MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K      0x23c 0x60c 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_8__EPIT2_OUT                0x23c 0x60c 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_8__FLEXCAN1_RX              0x23c 0x60c 0x7c8 0x3 0x0
+#define MX6QDL_PAD_GPIO_8__UART2_RX_DATA            0x23c 0x60c 0x904 0x4 0x3
+#define MX6QDL_PAD_GPIO_8__UART2_TX_DATA            0x23c 0x60c 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_8__GPIO1_IO08               0x23c 0x60c 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_8__SPDIF_SR_CLK             0x23c 0x60c 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE     0x23c 0x60c 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_8__I2C4_SDA                 0x23c 0x60c 0x884 0x8 0x1
+#define MX6QDL_PAD_GPIO_9__ESAI_RX_FS               0x240 0x610 0x82c 0x0 0x1
+#define MX6QDL_PAD_GPIO_9__WDOG1_B                  0x240 0x610 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_9__KEY_COL6                 0x240 0x610 0x8c4 0x2 0x1
+#define MX6QDL_PAD_GPIO_9__CCM_REF_EN_B             0x240 0x610 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_9__PWM1_OUT                 0x240 0x610 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_9__GPIO1_IO09               0x240 0x610 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_9__SD1_WP                   0x240 0x610 0x92c 0x6 0x1
+#define MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK            0x244 0x62c 0x7d8 0x0 0x3
+#define MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3          0x244 0x62c 0x824 0x1 0x0
+#define MX6QDL_PAD_KEY_COL0__AUD5_TXC               0x244 0x62c 0x7c0 0x2 0x1
+#define MX6QDL_PAD_KEY_COL0__KEY_COL0               0x244 0x62c 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL0__UART4_TX_DATA          0x244 0x62c 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL0__UART4_RX_DATA          0x244 0x62c 0x914 0x4 0x2
+#define MX6QDL_PAD_KEY_COL0__GPIO4_IO06             0x244 0x62c 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL0__DCIC1_OUT              0x244 0x62c 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL1__ECSPI1_MISO            0x248 0x630 0x7dc 0x0 0x3
+#define MX6QDL_PAD_KEY_COL1__ENET_MDIO              0x248 0x630 0x810 0x1 0x1
+#define MX6QDL_PAD_KEY_COL1__AUD5_TXFS              0x248 0x630 0x7c4 0x2 0x1
+#define MX6QDL_PAD_KEY_COL1__KEY_COL1               0x248 0x630 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL1__UART5_TX_DATA          0x248 0x630 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL1__UART5_RX_DATA          0x248 0x630 0x91c 0x4 0x2
+#define MX6QDL_PAD_KEY_COL1__GPIO4_IO08             0x248 0x630 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL1__SD1_VSELECT            0x248 0x630 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL2__ECSPI1_SS1             0x24c 0x634 0x7e8 0x0 0x2
+#define MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2          0x24c 0x634 0x820 0x1 0x0
+#define MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX            0x24c 0x634 0x000 0x2 0x0
+#define MX6QDL_PAD_KEY_COL2__KEY_COL2               0x24c 0x634 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL2__ENET_MDC               0x24c 0x634 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL2__GPIO4_IO10             0x24c 0x634 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE    0x24c 0x634 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL3__ECSPI1_SS3             0x250 0x638 0x7f0 0x0 0x1
+#define MX6QDL_PAD_KEY_COL3__ENET_CRS               0x250 0x638 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL        0x250 0x638 0x860 0x2 0x1
+#define MX6QDL_PAD_KEY_COL3__KEY_COL3               0x250 0x638 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL3__I2C2_SCL               0x250 0x638 0x870 0x4 0x1
+#define MX6QDL_PAD_KEY_COL3__GPIO4_IO12             0x250 0x638 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL3__SPDIF_IN               0x250 0x638 0x8f0 0x6 0x3
+#define MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX            0x254 0x63c 0x000 0x0 0x0
+#define MX6QDL_PAD_KEY_COL4__IPU1_SISG4             0x254 0x63c 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_COL4__USB_OTG_OC             0x254 0x63c 0x920 0x2 0x1
+#define MX6QDL_PAD_KEY_COL4__KEY_COL4               0x254 0x63c 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL4__UART5_RTS_B            0x254 0x63c 0x918 0x4 0x2
+#define MX6QDL_PAD_KEY_COL4__UART5_CTS_B            0x254 0x63c 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL4__GPIO4_IO14             0x254 0x63c 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI            0x258 0x640 0x7e0 0x0 0x3
+#define MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3          0x258 0x640 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW0__AUD5_TXD               0x258 0x640 0x7b4 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW0__KEY_ROW0               0x258 0x640 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA          0x258 0x640 0x914 0x4 0x3
+#define MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA          0x258 0x640 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW0__GPIO4_IO07             0x258 0x640 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW0__DCIC2_OUT              0x258 0x640 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0             0x25c 0x644 0x7e4 0x0 0x3
+#define MX6QDL_PAD_KEY_ROW1__ENET_COL               0x25c 0x644 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW1__AUD5_RXD               0x25c 0x644 0x7b0 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW1__KEY_ROW1               0x25c 0x644 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA          0x25c 0x644 0x91c 0x4 0x3
+#define MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA          0x25c 0x644 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW1__GPIO4_IO09             0x25c 0x644 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW1__SD2_VSELECT            0x25c 0x644 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW2__ECSPI1_SS2             0x260 0x648 0x7ec 0x0 0x1
+#define MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2          0x260 0x648 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX            0x260 0x648 0x7c8 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW2__KEY_ROW2               0x260 0x648 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW2__SD2_VSELECT            0x260 0x648 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW2__GPIO4_IO11             0x260 0x648 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE       0x260 0x648 0x85c 0x6 0x1
+#define MX6QDL_PAD_KEY_ROW3__ASRC_EXT_CLK           0x264 0x64c 0x794 0x1 0x2
+#define MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA        0x264 0x64c 0x864 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW3__KEY_ROW3               0x264 0x64c 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW3__I2C2_SDA               0x264 0x64c 0x874 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW3__GPIO4_IO13             0x264 0x64c 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW3__SD1_VSELECT            0x264 0x64c 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX            0x268 0x650 0x7cc 0x0 0x0
+#define MX6QDL_PAD_KEY_ROW4__IPU1_SISG5             0x268 0x650 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR            0x268 0x650 0x000 0x2 0x0
+#define MX6QDL_PAD_KEY_ROW4__KEY_ROW4               0x268 0x650 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW4__UART5_CTS_B            0x268 0x650 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW4__UART5_RTS_B            0x268 0x650 0x918 0x4 0x3
+#define MX6QDL_PAD_KEY_ROW4__GPIO4_IO15             0x268 0x650 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_ALE__NAND_ALE              0x26c 0x654 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_ALE__SD4_RESET             0x26c 0x654 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_ALE__GPIO6_IO08            0x26c 0x654 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CLE__NAND_CLE              0x270 0x658 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CLE__GPIO6_IO07            0x270 0x658 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS0__NAND_CE0_B            0x274 0x65c 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS0__GPIO6_IO11            0x274 0x65c 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS1__NAND_CE1_B            0x278 0x660 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS1__SD4_VSELECT           0x278 0x660 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS1__SD3_VSELECT           0x278 0x660 0x000 0x2 0x0
+#define MX6QDL_PAD_NANDF_CS1__GPIO6_IO14            0x278 0x660 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS2__NAND_CE2_B            0x27c 0x664 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS2__IPU1_SISG0            0x27c 0x664 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS2__ESAI_TX0              0x27c 0x664 0x844 0x2 0x1
+#define MX6QDL_PAD_NANDF_CS2__EIM_CRE               0x27c 0x664 0x000 0x3 0x0
+#define MX6QDL_PAD_NANDF_CS2__CCM_CLKO2             0x27c 0x664 0x000 0x4 0x0
+#define MX6QDL_PAD_NANDF_CS2__GPIO6_IO15            0x27c 0x664 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS3__NAND_CE3_B            0x280 0x668 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS3__IPU1_SISG1            0x280 0x668 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS3__ESAI_TX1              0x280 0x668 0x848 0x2 0x1
+#define MX6QDL_PAD_NANDF_CS3__EIM_ADDR26            0x280 0x668 0x000 0x3 0x0
+#define MX6QDL_PAD_NANDF_CS3__GPIO6_IO16            0x280 0x668 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS3__I2C4_SDA              0x280 0x668 0x884 0x9 0x2
+#define MX6QDL_PAD_NANDF_D0__NAND_DATA00            0x284 0x66c 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D0__SD1_DATA4              0x284 0x66c 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D0__GPIO2_IO00             0x284 0x66c 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D1__NAND_DATA01            0x288 0x670 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D1__SD1_DATA5              0x288 0x670 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D1__GPIO2_IO01             0x288 0x670 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D2__NAND_DATA02            0x28c 0x674 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D2__SD1_DATA6              0x28c 0x674 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D2__GPIO2_IO02             0x28c 0x674 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D3__NAND_DATA03            0x290 0x678 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D3__SD1_DATA7              0x290 0x678 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D3__GPIO2_IO03             0x290 0x678 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D4__NAND_DATA04            0x294 0x67c 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D4__SD2_DATA4              0x294 0x67c 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D4__GPIO2_IO04             0x294 0x67c 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D5__NAND_DATA05            0x298 0x680 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D5__SD2_DATA5              0x298 0x680 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D5__GPIO2_IO05             0x298 0x680 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D6__NAND_DATA06            0x29c 0x684 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D6__SD2_DATA6              0x29c 0x684 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D6__GPIO2_IO06             0x29c 0x684 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D7__NAND_DATA07            0x2a0 0x688 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D7__SD2_DATA7              0x2a0 0x688 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D7__GPIO2_IO07             0x2a0 0x688 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_RB0__NAND_READY_B          0x2a4 0x68c 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_RB0__GPIO6_IO10            0x2a4 0x68c 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_WP_B__NAND_WP_B            0x2a8 0x690 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09           0x2a8 0x690 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_WP_B__I2C4_SCL             0x2a8 0x690 0x880 0x9 0x2
+#define MX6QDL_PAD_RGMII_RD0__HSI_RX_READY          0x2ac 0x694 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD0__RGMII_RD0             0x2ac 0x694 0x818 0x1 0x1
+#define MX6QDL_PAD_RGMII_RD0__GPIO6_IO25            0x2ac 0x694 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD1__HSI_TX_FLAG           0x2b0 0x698 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD1__RGMII_RD1             0x2b0 0x698 0x81c 0x1 0x1
+#define MX6QDL_PAD_RGMII_RD1__GPIO6_IO27            0x2b0 0x698 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD2__HSI_TX_DATA           0x2b4 0x69c 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD2__RGMII_RD2             0x2b4 0x69c 0x820 0x1 0x1
+#define MX6QDL_PAD_RGMII_RD2__GPIO6_IO28            0x2b4 0x69c 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD3__HSI_TX_WAKE           0x2b8 0x6a0 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD3__RGMII_RD3             0x2b8 0x6a0 0x824 0x1 0x1
+#define MX6QDL_PAD_RGMII_RD3__GPIO6_IO29            0x2b8 0x6a0 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA        0x2bc 0x6a4 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL       0x2bc 0x6a4 0x828 0x1 0x1
+#define MX6QDL_PAD_RGMII_RX_CTL__GPIO6_IO24         0x2bc 0x6a4 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE         0x2c0 0x6a8 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RXC__RGMII_RXC             0x2c0 0x6a8 0x814 0x1 0x1
+#define MX6QDL_PAD_RGMII_RXC__GPIO6_IO30            0x2c0 0x6a8 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD0__HSI_TX_READY          0x2c4 0x6ac 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD0__RGMII_TD0             0x2c4 0x6ac 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD0__GPIO6_IO20            0x2c4 0x6ac 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD1__HSI_RX_FLAG           0x2c8 0x6b0 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD1__RGMII_TD1             0x2c8 0x6b0 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD1__GPIO6_IO21            0x2c8 0x6b0 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD2__HSI_RX_DATA           0x2cc 0x6b4 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD2__RGMII_TD2             0x2cc 0x6b4 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD2__GPIO6_IO22            0x2cc 0x6b4 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD3__HSI_RX_WAKE           0x2d0 0x6b8 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD3__RGMII_TD3             0x2d0 0x6b8 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD3__GPIO6_IO23            0x2d0 0x6b8 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE      0x2d4 0x6bc 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL       0x2d4 0x6bc 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26         0x2d4 0x6bc 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__ENET_REF_CLK       0x2d4 0x6bc 0x80c 0x7 0x1
+#define MX6QDL_PAD_RGMII_TXC__USB_H2_DATA           0x2d8 0x6c0 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TXC__RGMII_TXC             0x2d8 0x6c0 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TXC__SPDIF_EXT_CLK         0x2d8 0x6c0 0x8f4 0x2 0x1
+#define MX6QDL_PAD_RGMII_TXC__GPIO6_IO19            0x2d8 0x6c0 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M   0x2d8 0x6c0 0x000 0x7 0x0
+#define MX6QDL_PAD_SD1_CLK__SD1_CLK                 0x2dc 0x6c4 0x928 0x0 0x1
+#define MX6QDL_PAD_SD1_CLK__GPT_CLKIN               0x2dc 0x6c4 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_CLK__GPIO1_IO20              0x2dc 0x6c4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_CMD__SD1_CMD                 0x2e0 0x6c8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_CMD__PWM4_OUT                0x2e0 0x6c8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_CMD__GPT_COMPARE1            0x2e0 0x6c8 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_CMD__GPIO1_IO18              0x2e0 0x6c8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT0__SD1_DATA0              0x2e4 0x6cc 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1           0x2e4 0x6cc 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT0__GPIO1_IO16             0x2e4 0x6cc 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT1__SD1_DATA1              0x2e8 0x6d0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT1__PWM3_OUT               0x2e8 0x6d0 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2           0x2e8 0x6d0 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT1__GPIO1_IO17             0x2e8 0x6d0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT2__SD1_DATA2              0x2ec 0x6d4 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT2__GPT_COMPARE2           0x2ec 0x6d4 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT2__PWM2_OUT               0x2ec 0x6d4 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT2__WDOG1_B                0x2ec 0x6d4 0x000 0x4 0x0
+#define MX6QDL_PAD_SD1_DAT2__GPIO1_IO19             0x2ec 0x6d4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB      0x2ec 0x6d4 0x000 0x6 0x0
+#define MX6QDL_PAD_SD1_DAT3__SD1_DATA3              0x2f0 0x6d8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT3__GPT_COMPARE3           0x2f0 0x6d8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT3__PWM1_OUT               0x2f0 0x6d8 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT3__WDOG2_B                0x2f0 0x6d8 0x000 0x4 0x0
+#define MX6QDL_PAD_SD1_DAT3__GPIO1_IO21             0x2f0 0x6d8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB      0x2f0 0x6d8 0x000 0x6 0x0
+#define MX6QDL_PAD_SD2_CLK__SD2_CLK                 0x2f4 0x6dc 0x930 0x0 0x1
+#define MX6QDL_PAD_SD2_CLK__KEY_COL5                0x2f4 0x6dc 0x8c0 0x2 0x3
+#define MX6QDL_PAD_SD2_CLK__AUD4_RXFS               0x2f4 0x6dc 0x7a4 0x3 0x1
+#define MX6QDL_PAD_SD2_CLK__GPIO1_IO10              0x2f4 0x6dc 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_CMD__SD2_CMD                 0x2f8 0x6e0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_CMD__KEY_ROW5                0x2f8 0x6e0 0x8cc 0x2 0x2
+#define MX6QDL_PAD_SD2_CMD__AUD4_RXC                0x2f8 0x6e0 0x7a0 0x3 0x1
+#define MX6QDL_PAD_SD2_CMD__GPIO1_IO11              0x2f8 0x6e0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT0__SD2_DATA0              0x2fc 0x6e4 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT0__AUD4_RXD               0x2fc 0x6e4 0x798 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT0__KEY_ROW7               0x2fc 0x6e4 0x8d4 0x4 0x2
+#define MX6QDL_PAD_SD2_DAT0__GPIO1_IO15             0x2fc 0x6e4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT0__DCIC2_OUT              0x2fc 0x6e4 0x000 0x6 0x0
+#define MX6QDL_PAD_SD2_DAT1__SD2_DATA1              0x300 0x6e8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT1__EIM_CS2_B              0x300 0x6e8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD2_DAT1__AUD4_TXFS              0x300 0x6e8 0x7ac 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT1__KEY_COL7               0x300 0x6e8 0x8c8 0x4 0x2
+#define MX6QDL_PAD_SD2_DAT1__GPIO1_IO14             0x300 0x6e8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT2__SD2_DATA2              0x304 0x6ec 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT2__EIM_CS3_B              0x304 0x6ec 0x000 0x2 0x0
+#define MX6QDL_PAD_SD2_DAT2__AUD4_TXD               0x304 0x6ec 0x79c 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT2__KEY_ROW6               0x304 0x6ec 0x8d0 0x4 0x2
+#define MX6QDL_PAD_SD2_DAT2__GPIO1_IO13             0x304 0x6ec 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT3__SD2_DATA3              0x308 0x6f0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT3__KEY_COL6               0x308 0x6f0 0x8c4 0x2 0x2
+#define MX6QDL_PAD_SD2_DAT3__AUD4_TXC               0x308 0x6f0 0x7a8 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT3__GPIO1_IO12             0x308 0x6f0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_CLK__SD3_CLK                 0x30c 0x6f4 0x934 0x0 0x1
+#define MX6QDL_PAD_SD3_CLK__UART2_RTS_B             0x30c 0x6f4 0x900 0x1 0x2
+#define MX6QDL_PAD_SD3_CLK__UART2_CTS_B             0x30c 0x6f4 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX             0x30c 0x6f4 0x7c8 0x2 0x2
+#define MX6QDL_PAD_SD3_CLK__GPIO7_IO03              0x30c 0x6f4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_CMD__SD3_CMD                 0x310 0x6f8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_CMD__UART2_CTS_B             0x310 0x6f8 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_CMD__UART2_RTS_B             0x310 0x6f8 0x900 0x1 0x3
+#define MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX             0x310 0x6f8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD3_CMD__GPIO7_IO02              0x310 0x6f8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT0__SD3_DATA0              0x314 0x6fc 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT0__UART1_CTS_B            0x314 0x6fc 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT0__UART1_RTS_B            0x314 0x6fc 0x8f8 0x1 0x2
+#define MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX            0x314 0x6fc 0x000 0x2 0x0
+#define MX6QDL_PAD_SD3_DAT0__GPIO7_IO04             0x314 0x6fc 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT1__SD3_DATA1              0x318 0x700 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT1__UART1_RTS_B            0x318 0x700 0x8f8 0x1 0x3
+#define MX6QDL_PAD_SD3_DAT1__UART1_CTS_B            0x318 0x700 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX            0x318 0x700 0x7cc 0x2 0x1
+#define MX6QDL_PAD_SD3_DAT1__GPIO7_IO05             0x318 0x700 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT2__SD3_DATA2              0x31c 0x704 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT2__GPIO7_IO06             0x31c 0x704 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT3__SD3_DATA3              0x320 0x708 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT3__UART3_CTS_B            0x320 0x708 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT3__UART3_RTS_B            0x320 0x708 0x908 0x1 0x4
+#define MX6QDL_PAD_SD3_DAT3__GPIO7_IO07             0x320 0x708 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT4__SD3_DATA4              0x324 0x70c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA          0x324 0x70c 0x904 0x1 0x4
+#define MX6QDL_PAD_SD3_DAT4__UART2_TX_DATA          0x324 0x70c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT4__GPIO7_IO01             0x324 0x70c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT5__SD3_DATA5              0x328 0x710 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA          0x328 0x710 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT5__UART2_RX_DATA          0x328 0x710 0x904 0x1 0x5
+#define MX6QDL_PAD_SD3_DAT5__GPIO7_IO00             0x328 0x710 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT6__SD3_DATA6              0x32c 0x714 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA          0x32c 0x714 0x8fc 0x1 0x2
+#define MX6QDL_PAD_SD3_DAT6__UART1_TX_DATA          0x32c 0x714 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT6__GPIO6_IO18             0x32c 0x714 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT7__SD3_DATA7              0x330 0x718 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA          0x330 0x718 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT7__UART1_RX_DATA          0x330 0x718 0x8fc 0x1 0x3
+#define MX6QDL_PAD_SD3_DAT7__GPIO6_IO17             0x330 0x718 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_RST__SD3_RESET               0x334 0x71c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_RST__UART3_RTS_B             0x334 0x71c 0x908 0x1 0x5
+#define MX6QDL_PAD_SD3_RST__UART3_CTS_B             0x334 0x71c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_RST__GPIO7_IO08              0x334 0x71c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_CLK__SD4_CLK                 0x338 0x720 0x938 0x0 0x1
+#define MX6QDL_PAD_SD4_CLK__NAND_WE_B               0x338 0x720 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_CLK__UART3_RX_DATA           0x338 0x720 0x90c 0x2 0x2
+#define MX6QDL_PAD_SD4_CLK__UART3_TX_DATA           0x338 0x720 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_CLK__GPIO7_IO10              0x338 0x720 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_CMD__SD4_CMD                 0x33c 0x724 0x000 0x0 0x0
+#define MX6QDL_PAD_SD4_CMD__NAND_RE_B               0x33c 0x724 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_CMD__UART3_TX_DATA           0x33c 0x724 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_CMD__UART3_RX_DATA           0x33c 0x724 0x90c 0x2 0x3
+#define MX6QDL_PAD_SD4_CMD__GPIO7_IO09              0x33c 0x724 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT0__SD4_DATA0              0x340 0x728 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT0__NAND_DQS               0x340 0x728 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT0__GPIO2_IO08             0x340 0x728 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT1__SD4_DATA1              0x344 0x72c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT1__PWM3_OUT               0x344 0x72c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT1__GPIO2_IO09             0x344 0x72c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT2__SD4_DATA2              0x348 0x730 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT2__PWM4_OUT               0x348 0x730 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT2__GPIO2_IO10             0x348 0x730 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT3__SD4_DATA3              0x34c 0x734 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT3__GPIO2_IO11             0x34c 0x734 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT4__SD4_DATA4              0x350 0x738 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA          0x350 0x738 0x904 0x2 0x6
+#define MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA          0x350 0x738 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT4__GPIO2_IO12             0x350 0x738 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT5__SD4_DATA5              0x354 0x73c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT5__UART2_RTS_B            0x354 0x73c 0x900 0x2 0x4
+#define MX6QDL_PAD_SD4_DAT5__UART2_CTS_B            0x354 0x73c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT5__GPIO2_IO13             0x354 0x73c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT6__SD4_DATA6              0x358 0x740 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT6__UART2_CTS_B            0x358 0x740 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT6__UART2_RTS_B            0x358 0x740 0x900 0x2 0x5
+#define MX6QDL_PAD_SD4_DAT6__GPIO2_IO14             0x358 0x740 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT7__SD4_DATA7              0x35c 0x744 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA          0x35c 0x744 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA          0x35c 0x744 0x904 0x2 0x7
+#define MX6QDL_PAD_SD4_DAT7__GPIO2_IO15             0x35c 0x744 0x000 0x5 0x0
 
 #endif /* __DTS_IMX6DL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6dl-sabreauto.dts b/arch/arm/boot/dts/imx6dl-sabreauto.dts
index 95da711..a6ce7b4 100644
--- a/arch/arm/boot/dts/imx6dl-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6dl-sabreauto.dts
@@ -15,25 +15,3 @@
 	model = "Freescale i.MX6 DualLite/Solo SABRE Automotive Board";
 	compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl";
 };
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	hog {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6DL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
-				MX6DL_PAD_SD2_DAT2__GPIO1_IO13  0x80000000
-			>;
-		};
-	};
-
-	ecspi1 {
-		pinctrl_ecspi1_sabreauto: ecspi1-sabreauto {
-			fsl,pins = <
-				MX6DL_PAD_EIM_D19__GPIO3_IO19  0x80000000
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-sabresd.dts b/arch/arm/boot/dts/imx6dl-sabresd.dts
index 8989df2..1e45f2f 100644
--- a/arch/arm/boot/dts/imx6dl-sabresd.dts
+++ b/arch/arm/boot/dts/imx6dl-sabresd.dts
@@ -15,22 +15,3 @@
 	model = "Freescale i.MX6 DualLite SABRE Smart Device Board";
 	compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl";
 };
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	hog {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6DL_PAD_GPIO_4__GPIO1_IO04   0x80000000
-				MX6DL_PAD_GPIO_5__GPIO1_IO05   0x80000000
-				MX6DL_PAD_NANDF_D0__GPIO2_IO00 0x80000000
-				MX6DL_PAD_NANDF_D1__GPIO2_IO01 0x80000000
-				MX6DL_PAD_NANDF_D2__GPIO2_IO02 0x80000000
-				MX6DL_PAD_NANDF_D3__GPIO2_IO03 0x80000000
-				MX6DL_PAD_GPIO_0__CCM_CLKO1    0x130b0
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-wandboard.dts b/arch/arm/boot/dts/imx6dl-wandboard.dts
index bfc59c3..e672891 100644
--- a/arch/arm/boot/dts/imx6dl-wandboard.dts
+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts
@@ -10,6 +10,7 @@
  */
 /dts-v1/;
 #include "imx6dl.dtsi"
+#include "imx6qdl-wandboard.dtsi"
 
 / {
 	model = "Wandboard i.MX6 Dual Lite Board";
@@ -19,26 +20,3 @@
 		reg = <0x10000000 0x40000000>;
 	};
 };
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_1>;
-	phy-mode = "rgmii";
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_1>;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3_2>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 2b3ecd6..9e8ae11 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -8,8 +8,8 @@
  *
  */
 
-#include "imx6qdl.dtsi"
 #include "imx6dl-pinfunc.h"
+#include "imx6qdl.dtsi"
 
 / {
 	cpus {
@@ -32,238 +32,15 @@
 	};
 
 	soc {
+		ocram: sram@00900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+			clocks = <&clks 142>;
+		};
+
 		aips1: aips-bus@02000000 {
 			iomuxc: iomuxc@020e0000 {
 				compatible = "fsl,imx6dl-iomuxc";
-				reg = <0x020e0000 0x4000>;
-
-				audmux {
-					pinctrl_audmux_2: audmux-2 {
-						fsl,pins = <
-							MX6DL_PAD_CSI0_DAT7__AUD3_RXD  0x80000000
-							MX6DL_PAD_CSI0_DAT4__AUD3_TXC  0x80000000
-							MX6DL_PAD_CSI0_DAT5__AUD3_TXD  0x80000000
-							MX6DL_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000
-						>;
-					};
-				};
-
-				ecspi1 {
-					pinctrl_ecspi1_1: ecspi1grp-1 {
-						fsl,pins = <
-							MX6DL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
-							MX6DL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
-							MX6DL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
-						>;
-					};
-				};
-
-				enet {
-					pinctrl_enet_1: enetgrp-1 {
-						fsl,pins = <
-							MX6DL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
-							MX6DL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
-							MX6DL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
-							MX6DL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
-							MX6DL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
-							MX6DL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
-							MX6DL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
-							MX6DL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-							MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-							MX6DL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-							MX6DL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-							MX6DL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-							MX6DL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-							MX6DL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-							MX6DL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-							MX6DL_PAD_GPIO_16__ENET_REF_CLK      0x4001b0a8
-						>;
-					};
-
-					pinctrl_enet_2: enetgrp-2 {
-						fsl,pins = <
-							MX6DL_PAD_KEY_COL1__ENET_MDIO        0x1b0b0
-							MX6DL_PAD_KEY_COL2__ENET_MDC         0x1b0b0
-							MX6DL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
-							MX6DL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
-							MX6DL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
-							MX6DL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
-							MX6DL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
-							MX6DL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-							MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-							MX6DL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-							MX6DL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-							MX6DL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-							MX6DL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-							MX6DL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-							MX6DL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-						>;
-					};
-				};
-
-				gpmi-nand {
-					pinctrl_gpmi_nand_1: gpmi-nand-1 {
-						fsl,pins = <
-							MX6DL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
-							MX6DL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
-							MX6DL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
-							MX6DL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-							MX6DL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
-							MX6DL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
-							MX6DL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
-							MX6DL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
-							MX6DL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
-							MX6DL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
-							MX6DL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
-							MX6DL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
-							MX6DL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
-							MX6DL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
-							MX6DL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
-							MX6DL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
-							MX6DL_PAD_SD4_DAT0__NAND_DQS      0x00b1
-						>;
-					};
-				};
-
-				i2c1 {
-					pinctrl_i2c1_2: i2c1grp-2 {
-						fsl,pins = <
-							MX6DL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
-							MX6DL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
-						>;
-					};
-				};
-
-				uart1 {
-					pinctrl_uart1_1: uart1grp-1 {
-						fsl,pins = <
-							MX6DL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
-							MX6DL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
-						>;
-					};
-				};
-
-				uart4 {
-					pinctrl_uart4_1: uart4grp-1 {
-						fsl,pins = <
-							MX6DL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
-							MX6DL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
-						>;
-					};
-				};
-
-				usbotg {
-					pinctrl_usbotg_2: usbotggrp-2 {
-						fsl,pins = <
-							MX6DL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
-						>;
-					};
-				};
-
-				usdhc2 {
-					pinctrl_usdhc2_1: usdhc2grp-1 {
-						fsl,pins = <
-							MX6DL_PAD_SD2_CMD__SD2_CMD    0x17059
-							MX6DL_PAD_SD2_CLK__SD2_CLK    0x10059
-							MX6DL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-							MX6DL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-							MX6DL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-							MX6DL_PAD_SD2_DAT3__SD2_DATA3 0x17059
-							MX6DL_PAD_NANDF_D4__SD2_DATA4 0x17059
-							MX6DL_PAD_NANDF_D5__SD2_DATA5 0x17059
-							MX6DL_PAD_NANDF_D6__SD2_DATA6 0x17059
-							MX6DL_PAD_NANDF_D7__SD2_DATA7 0x17059
-						>;
-					};
-				};
-
-				usdhc3 {
-					pinctrl_usdhc3_1: usdhc3grp-1 {
-						fsl,pins = <
-							MX6DL_PAD_SD3_CMD__SD3_CMD    0x17059
-							MX6DL_PAD_SD3_CLK__SD3_CLK    0x10059
-							MX6DL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-							MX6DL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-							MX6DL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-							MX6DL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-							MX6DL_PAD_SD3_DAT4__SD3_DATA4 0x17059
-							MX6DL_PAD_SD3_DAT5__SD3_DATA5 0x17059
-							MX6DL_PAD_SD3_DAT6__SD3_DATA6 0x17059
-							MX6DL_PAD_SD3_DAT7__SD3_DATA7 0x17059
-						>;
-					};
-
-					pinctrl_usdhc3_2: usdhc3grp_2 {
-						fsl,pins = <
-							MX6DL_PAD_SD3_CMD__SD3_CMD    0x17059
-							MX6DL_PAD_SD3_CLK__SD3_CLK    0x10059
-							MX6DL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-							MX6DL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-							MX6DL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-							MX6DL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-						>;
-					};
-				};
-
-				weim {
-					pinctrl_weim_cs0_1: weim_cs0grp-1 {
-						fsl,pins = <
-							MX6DL_PAD_EIM_CS0__EIM_CS0_B   0xb0b1
-						>;
-					};
-
-					pinctrl_weim_nor_1: weim_norgrp-1 {
-						fsl,pins = <
-							MX6DL_PAD_EIM_OE__EIM_OE_B     0xb0b1
-							MX6DL_PAD_EIM_RW__EIM_RW       0xb0b1
-							MX6DL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060
-							/* data */
-							MX6DL_PAD_EIM_D16__EIM_DATA16 0x1b0b0
-							MX6DL_PAD_EIM_D17__EIM_DATA17 0x1b0b0
-							MX6DL_PAD_EIM_D18__EIM_DATA18 0x1b0b0
-							MX6DL_PAD_EIM_D19__EIM_DATA19 0x1b0b0
-							MX6DL_PAD_EIM_D20__EIM_DATA20 0x1b0b0
-							MX6DL_PAD_EIM_D21__EIM_DATA21 0x1b0b0
-							MX6DL_PAD_EIM_D22__EIM_DATA22 0x1b0b0
-							MX6DL_PAD_EIM_D23__EIM_DATA23 0x1b0b0
-							MX6DL_PAD_EIM_D24__EIM_DATA24 0x1b0b0
-							MX6DL_PAD_EIM_D25__EIM_DATA25 0x1b0b0
-							MX6DL_PAD_EIM_D26__EIM_DATA26 0x1b0b0
-							MX6DL_PAD_EIM_D27__EIM_DATA27 0x1b0b0
-							MX6DL_PAD_EIM_D28__EIM_DATA28 0x1b0b0
-							MX6DL_PAD_EIM_D29__EIM_DATA29 0x1b0b0
-							MX6DL_PAD_EIM_D30__EIM_DATA30 0x1b0b0
-							MX6DL_PAD_EIM_D31__EIM_DATA31 0x1b0b0
-							/* address */
-							MX6DL_PAD_EIM_A23__EIM_ADDR23 0xb0b1
-							MX6DL_PAD_EIM_A22__EIM_ADDR22 0xb0b1
-							MX6DL_PAD_EIM_A21__EIM_ADDR21 0xb0b1
-							MX6DL_PAD_EIM_A20__EIM_ADDR20 0xb0b1
-							MX6DL_PAD_EIM_A19__EIM_ADDR19 0xb0b1
-							MX6DL_PAD_EIM_A18__EIM_ADDR18 0xb0b1
-							MX6DL_PAD_EIM_A17__EIM_ADDR17 0xb0b1
-							MX6DL_PAD_EIM_A16__EIM_ADDR16 0xb0b1
-							MX6DL_PAD_EIM_DA15__EIM_AD15  0xb0b1
-							MX6DL_PAD_EIM_DA14__EIM_AD14  0xb0b1
-							MX6DL_PAD_EIM_DA13__EIM_AD13  0xb0b1
-							MX6DL_PAD_EIM_DA12__EIM_AD12  0xb0b1
-							MX6DL_PAD_EIM_DA11__EIM_AD11  0xb0b1
-							MX6DL_PAD_EIM_DA10__EIM_AD10  0xb0b1
-							MX6DL_PAD_EIM_DA9__EIM_AD09   0xb0b1
-							MX6DL_PAD_EIM_DA8__EIM_AD08   0xb0b1
-							MX6DL_PAD_EIM_DA7__EIM_AD07   0xb0b1
-							MX6DL_PAD_EIM_DA6__EIM_AD06   0xb0b1
-							MX6DL_PAD_EIM_DA5__EIM_AD05   0xb0b1
-							MX6DL_PAD_EIM_DA4__EIM_AD04   0xb0b1
-							MX6DL_PAD_EIM_DA3__EIM_AD03   0xb0b1
-							MX6DL_PAD_EIM_DA2__EIM_AD02   0xb0b1
-							MX6DL_PAD_EIM_DA1__EIM_AD01   0xb0b1
-							MX6DL_PAD_EIM_DA0__EIM_AD00   0xb0b1
-						>;
-					};
-
-				};
-
 			};
 
 			pxp: pxp@020f0000 {
@@ -294,3 +71,20 @@
 		};
 	};
 };
+
+&ldb {
+	clocks = <&clks 33>, <&clks 34>,
+		 <&clks 39>, <&clks 40>,
+		 <&clks 135>, <&clks 136>;
+	clock-names = "di0_pll", "di1_pll",
+		      "di0_sel", "di1_sel",
+		      "di0", "di1";
+
+	lvds-channel@0 {
+		crtcs = <&ipu1 0>, <&ipu1 1>;
+	};
+
+	lvds-channel@1 {
+		crtcs = <&ipu1 0>, <&ipu1 1>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index 4e54fde..edf1bd9 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -57,7 +57,7 @@
 	hog {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				MX6Q_PAD_EIM_D25__GPIO3_IO25 0x80000000
+				MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x80000000
 			>;
 		};
 	};
@@ -65,8 +65,8 @@
 	arm2 {
 		pinctrl_usdhc3_arm2: usdhc3grp-arm2 {
 			fsl,pins = <
-				MX6Q_PAD_NANDF_CS0__GPIO6_IO11 0x80000000
-				MX6Q_PAD_NANDF_CS1__GPIO6_IO14 0x80000000
+				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000
+				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000
 			>;
 		};
 	};
@@ -97,6 +97,14 @@
 	status = "okay";
 };
 
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_2>;
+	fsl,dte-mode;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4_1>;
diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
index f5e1981..1a3b50d 100644
--- a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
@@ -20,6 +20,110 @@
 	};
 };
 
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3_1>;
+	status = "okay";
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 24 0>;
+
+	flash@0 {
+		compatible = "m25p80";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_1>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+	};
+
+	pmic@58 {
+		compatible = "dialog,da9063";
+		reg = <0x58>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <17 0x8>; /* active-low GPIO4_17 */
+
+		regulators {
+			vddcore_reg: bcore1 {
+				regulator-min-microvolt = <730000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-always-on;
+			};
+
+			vddsoc_reg: bcore2 {
+				regulator-min-microvolt = <730000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-always-on;
+			};
+
+			vdd_ddr3_reg: bpro {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			vdd_3v3_reg: bperi {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_buckmem_reg: bmem {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_eth_reg: bio {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vdd_eth_io_reg: ldo4 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vdd_mx6_snvs_reg: ldo5 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vdd_3v3_pmic_io_reg: ldo6 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_sd0_reg: ldo9 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_sd1_reg: ldo10 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_mx6_high_reg: ldo11 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
@@ -27,7 +131,9 @@
 	hog {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				MX6Q_PAD_EIM_D23__GPIO3_IO23    0x80000000
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
+				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
+				MX6QDL_PAD_DI0_PIN15__GPIO4_IO17  0x80000000 /* PMIC interrupt */
 			>;
 		};
 	};
@@ -35,8 +141,8 @@
 	pfla02 {
 		pinctrl_usdhc3_pfla02: usdhc3grp-pfla02 {
 			fsl,pins = <
-				MX6Q_PAD_ENET_RXD0__GPIO1_IO27  0x80000000
-				MX6Q_PAD_ENET_TXD1__GPIO1_IO29  0x80000000
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
 			>;
 		};
 	};
diff --git a/arch/arm/boot/dts/imx6q-pinfunc.h b/arch/arm/boot/dts/imx6q-pinfunc.h
index faea6e1..97ed081 100644
--- a/arch/arm/boot/dts/imx6q-pinfunc.h
+++ b/arch/arm/boot/dts/imx6q-pinfunc.h
@@ -14,1028 +14,1032 @@
  * The pin function ID is a tuple of
  * <mux_reg conf_reg input_reg mux_mode input_val>
  */
-#define MX6Q_PAD_SD2_DAT1__SD2_DATA1              0x04c 0x360 0x000 0x0 0x0
-#define MX6Q_PAD_SD2_DAT1__ECSPI5_SS0             0x04c 0x360 0x834 0x1 0x0
-#define MX6Q_PAD_SD2_DAT1__EIM_CS2_B              0x04c 0x360 0x000 0x2 0x0
-#define MX6Q_PAD_SD2_DAT1__AUD4_TXFS              0x04c 0x360 0x7c8 0x3 0x0
-#define MX6Q_PAD_SD2_DAT1__KEY_COL7               0x04c 0x360 0x8f0 0x4 0x0
-#define MX6Q_PAD_SD2_DAT1__GPIO1_IO14             0x04c 0x360 0x000 0x5 0x0
-#define MX6Q_PAD_SD2_DAT2__SD2_DATA2              0x050 0x364 0x000 0x0 0x0
-#define MX6Q_PAD_SD2_DAT2__ECSPI5_SS1             0x050 0x364 0x838 0x1 0x0
-#define MX6Q_PAD_SD2_DAT2__EIM_CS3_B              0x050 0x364 0x000 0x2 0x0
-#define MX6Q_PAD_SD2_DAT2__AUD4_TXD               0x050 0x364 0x7b8 0x3 0x0
-#define MX6Q_PAD_SD2_DAT2__KEY_ROW6               0x050 0x364 0x8f8 0x4 0x0
-#define MX6Q_PAD_SD2_DAT2__GPIO1_IO13             0x050 0x364 0x000 0x5 0x0
-#define MX6Q_PAD_SD2_DAT0__SD2_DATA0              0x054 0x368 0x000 0x0 0x0
-#define MX6Q_PAD_SD2_DAT0__ECSPI5_MISO            0x054 0x368 0x82c 0x1 0x0
-#define MX6Q_PAD_SD2_DAT0__AUD4_RXD               0x054 0x368 0x7b4 0x3 0x0
-#define MX6Q_PAD_SD2_DAT0__KEY_ROW7               0x054 0x368 0x8fc 0x4 0x0
-#define MX6Q_PAD_SD2_DAT0__GPIO1_IO15             0x054 0x368 0x000 0x5 0x0
-#define MX6Q_PAD_SD2_DAT0__DCIC2_OUT              0x054 0x368 0x000 0x6 0x0
-#define MX6Q_PAD_RGMII_TXC__USB_H2_DATA           0x058 0x36c 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_TXC__RGMII_TXC             0x058 0x36c 0x000 0x1 0x0
-#define MX6Q_PAD_RGMII_TXC__SPDIF_EXT_CLK         0x058 0x36c 0x918 0x2 0x0
-#define MX6Q_PAD_RGMII_TXC__GPIO6_IO19            0x058 0x36c 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M   0x058 0x36c 0x000 0x7 0x0
-#define MX6Q_PAD_RGMII_TD0__HSI_TX_READY          0x05c 0x370 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_TD0__RGMII_TD0             0x05c 0x370 0x000 0x1 0x0
-#define MX6Q_PAD_RGMII_TD0__GPIO6_IO20            0x05c 0x370 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_TD1__HSI_RX_FLAG           0x060 0x374 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_TD1__RGMII_TD1             0x060 0x374 0x000 0x1 0x0
-#define MX6Q_PAD_RGMII_TD1__GPIO6_IO21            0x060 0x374 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_TD2__HSI_RX_DATA           0x064 0x378 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_TD2__RGMII_TD2             0x064 0x378 0x000 0x1 0x0
-#define MX6Q_PAD_RGMII_TD2__GPIO6_IO22            0x064 0x378 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_TD3__HSI_RX_WAKE           0x068 0x37c 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_TD3__RGMII_TD3             0x068 0x37c 0x000 0x1 0x0
-#define MX6Q_PAD_RGMII_TD3__GPIO6_IO23            0x068 0x37c 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_RX_CTL__USB_H3_DATA        0x06c 0x380 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL       0x06c 0x380 0x858 0x1 0x0
-#define MX6Q_PAD_RGMII_RX_CTL__GPIO6_IO24         0x06c 0x380 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_RD0__HSI_RX_READY          0x070 0x384 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_RD0__RGMII_RD0             0x070 0x384 0x848 0x1 0x0
-#define MX6Q_PAD_RGMII_RD0__GPIO6_IO25            0x070 0x384 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_TX_CTL__USB_H2_STROBE      0x074 0x388 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL       0x074 0x388 0x000 0x1 0x0
-#define MX6Q_PAD_RGMII_TX_CTL__GPIO6_IO26         0x074 0x388 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_TX_CTL__ENET_REF_CLK       0x074 0x388 0x83c 0x7 0x0
-#define MX6Q_PAD_RGMII_RD1__HSI_TX_FLAG           0x078 0x38c 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_RD1__RGMII_RD1             0x078 0x38c 0x84c 0x1 0x0
-#define MX6Q_PAD_RGMII_RD1__GPIO6_IO27            0x078 0x38c 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_RD2__HSI_TX_DATA           0x07c 0x390 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_RD2__RGMII_RD2             0x07c 0x390 0x850 0x1 0x0
-#define MX6Q_PAD_RGMII_RD2__GPIO6_IO28            0x07c 0x390 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_RD3__HSI_TX_WAKE           0x080 0x394 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_RD3__RGMII_RD3             0x080 0x394 0x854 0x1 0x0
-#define MX6Q_PAD_RGMII_RD3__GPIO6_IO29            0x080 0x394 0x000 0x5 0x0
-#define MX6Q_PAD_RGMII_RXC__USB_H3_STROBE         0x084 0x398 0x000 0x0 0x0
-#define MX6Q_PAD_RGMII_RXC__RGMII_RXC             0x084 0x398 0x844 0x1 0x0
-#define MX6Q_PAD_RGMII_RXC__GPIO6_IO30            0x084 0x398 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A25__EIM_ADDR25              0x088 0x39c 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A25__ECSPI4_SS1              0x088 0x39c 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A25__ECSPI2_RDY              0x088 0x39c 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_A25__IPU1_DI1_PIN12          0x088 0x39c 0x000 0x3 0x0
-#define MX6Q_PAD_EIM_A25__IPU1_DI0_D1_CS          0x088 0x39c 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_A25__GPIO5_IO02              0x088 0x39c 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A25__HDMI_TX_CEC_LINE        0x088 0x39c 0x88c 0x6 0x0
-#define MX6Q_PAD_EIM_EB2__EIM_EB2_B               0x08c 0x3a0 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_EB2__ECSPI1_SS0              0x08c 0x3a0 0x800 0x1 0x0
-#define MX6Q_PAD_EIM_EB2__IPU2_CSI1_DATA19        0x08c 0x3a0 0x8d4 0x3 0x0
-#define MX6Q_PAD_EIM_EB2__HDMI_TX_DDC_SCL         0x08c 0x3a0 0x890 0x4 0x0
-#define MX6Q_PAD_EIM_EB2__GPIO2_IO30              0x08c 0x3a0 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_EB2__I2C2_SCL                0x08c 0x3a0 0x8a0 0x6 0x0
-#define MX6Q_PAD_EIM_EB2__SRC_BOOT_CFG30          0x08c 0x3a0 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_D16__EIM_DATA16              0x090 0x3a4 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D16__ECSPI1_SCLK             0x090 0x3a4 0x7f4 0x1 0x0
-#define MX6Q_PAD_EIM_D16__IPU1_DI0_PIN05          0x090 0x3a4 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D16__IPU2_CSI1_DATA18        0x090 0x3a4 0x8d0 0x3 0x0
-#define MX6Q_PAD_EIM_D16__HDMI_TX_DDC_SDA         0x090 0x3a4 0x894 0x4 0x0
-#define MX6Q_PAD_EIM_D16__GPIO3_IO16              0x090 0x3a4 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D16__I2C2_SDA                0x090 0x3a4 0x8a4 0x6 0x0
-#define MX6Q_PAD_EIM_D17__EIM_DATA17              0x094 0x3a8 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D17__ECSPI1_MISO             0x094 0x3a8 0x7f8 0x1 0x0
-#define MX6Q_PAD_EIM_D17__IPU1_DI0_PIN06          0x094 0x3a8 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D17__IPU2_CSI1_PIXCLK        0x094 0x3a8 0x8e0 0x3 0x0
-#define MX6Q_PAD_EIM_D17__DCIC1_OUT               0x094 0x3a8 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D17__GPIO3_IO17              0x094 0x3a8 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D17__I2C3_SCL                0x094 0x3a8 0x8a8 0x6 0x0
-#define MX6Q_PAD_EIM_D18__EIM_DATA18              0x098 0x3ac 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D18__ECSPI1_MOSI             0x098 0x3ac 0x7fc 0x1 0x0
-#define MX6Q_PAD_EIM_D18__IPU1_DI0_PIN07          0x098 0x3ac 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D18__IPU2_CSI1_DATA17        0x098 0x3ac 0x8cc 0x3 0x0
-#define MX6Q_PAD_EIM_D18__IPU1_DI1_D0_CS          0x098 0x3ac 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D18__GPIO3_IO18              0x098 0x3ac 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D18__I2C3_SDA                0x098 0x3ac 0x8ac 0x6 0x0
-#define MX6Q_PAD_EIM_D19__EIM_DATA19              0x09c 0x3b0 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D19__ECSPI1_SS1              0x09c 0x3b0 0x804 0x1 0x0
-#define MX6Q_PAD_EIM_D19__IPU1_DI0_PIN08          0x09c 0x3b0 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D19__IPU2_CSI1_DATA16        0x09c 0x3b0 0x8c8 0x3 0x0
-#define MX6Q_PAD_EIM_D19__UART1_CTS_B             0x09c 0x3b0 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D19__UART1_RTS_B             0x09c 0x3b0 0x91c 0x4 0x0
-#define MX6Q_PAD_EIM_D19__GPIO3_IO19              0x09c 0x3b0 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D19__EPIT1_OUT               0x09c 0x3b0 0x000 0x6 0x0
-#define MX6Q_PAD_EIM_D20__EIM_DATA20              0x0a0 0x3b4 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D20__ECSPI4_SS0              0x0a0 0x3b4 0x824 0x1 0x0
-#define MX6Q_PAD_EIM_D20__IPU1_DI0_PIN16          0x0a0 0x3b4 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D20__IPU2_CSI1_DATA15        0x0a0 0x3b4 0x8c4 0x3 0x0
-#define MX6Q_PAD_EIM_D20__UART1_RTS_B             0x0a0 0x3b4 0x91c 0x4 0x1
-#define MX6Q_PAD_EIM_D20__UART1_CTS_B             0x0a0 0x3b4 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D20__GPIO3_IO20              0x0a0 0x3b4 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D20__EPIT2_OUT               0x0a0 0x3b4 0x000 0x6 0x0
-#define MX6Q_PAD_EIM_D21__EIM_DATA21              0x0a4 0x3b8 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D21__ECSPI4_SCLK             0x0a4 0x3b8 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D21__IPU1_DI0_PIN17          0x0a4 0x3b8 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D21__IPU2_CSI1_DATA11        0x0a4 0x3b8 0x8b4 0x3 0x0
-#define MX6Q_PAD_EIM_D21__USB_OTG_OC              0x0a4 0x3b8 0x944 0x4 0x0
-#define MX6Q_PAD_EIM_D21__GPIO3_IO21              0x0a4 0x3b8 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D21__I2C1_SCL                0x0a4 0x3b8 0x898 0x6 0x0
-#define MX6Q_PAD_EIM_D21__SPDIF_IN                0x0a4 0x3b8 0x914 0x7 0x0
-#define MX6Q_PAD_EIM_D22__EIM_DATA22              0x0a8 0x3bc 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D22__ECSPI4_MISO             0x0a8 0x3bc 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D22__IPU1_DI0_PIN01          0x0a8 0x3bc 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D22__IPU2_CSI1_DATA10        0x0a8 0x3bc 0x8b0 0x3 0x0
-#define MX6Q_PAD_EIM_D22__USB_OTG_PWR             0x0a8 0x3bc 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D22__GPIO3_IO22              0x0a8 0x3bc 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D22__SPDIF_OUT               0x0a8 0x3bc 0x000 0x6 0x0
-#define MX6Q_PAD_EIM_D23__EIM_DATA23              0x0ac 0x3c0 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D23__IPU1_DI0_D0_CS          0x0ac 0x3c0 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D23__UART3_CTS_B             0x0ac 0x3c0 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D23__UART3_RTS_B             0x0ac 0x3c0 0x92c 0x2 0x0
-#define MX6Q_PAD_EIM_D23__UART1_DCD_B             0x0ac 0x3c0 0x000 0x3 0x0
-#define MX6Q_PAD_EIM_D23__IPU2_CSI1_DATA_EN       0x0ac 0x3c0 0x8d8 0x4 0x0
-#define MX6Q_PAD_EIM_D23__GPIO3_IO23              0x0ac 0x3c0 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D23__IPU1_DI1_PIN02          0x0ac 0x3c0 0x000 0x6 0x0
-#define MX6Q_PAD_EIM_D23__IPU1_DI1_PIN14          0x0ac 0x3c0 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_EB3__EIM_EB3_B               0x0b0 0x3c4 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_EB3__ECSPI4_RDY              0x0b0 0x3c4 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_EB3__UART3_RTS_B             0x0b0 0x3c4 0x92c 0x2 0x1
-#define MX6Q_PAD_EIM_EB3__UART3_CTS_B             0x0b0 0x3c4 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_EB3__UART1_RI_B              0x0b0 0x3c4 0x000 0x3 0x0
-#define MX6Q_PAD_EIM_EB3__IPU2_CSI1_HSYNC         0x0b0 0x3c4 0x8dc 0x4 0x0
-#define MX6Q_PAD_EIM_EB3__GPIO2_IO31              0x0b0 0x3c4 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_EB3__IPU1_DI1_PIN03          0x0b0 0x3c4 0x000 0x6 0x0
-#define MX6Q_PAD_EIM_EB3__SRC_BOOT_CFG31          0x0b0 0x3c4 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_D24__EIM_DATA24              0x0b4 0x3c8 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D24__ECSPI4_SS2              0x0b4 0x3c8 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D24__UART3_TX_DATA           0x0b4 0x3c8 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D24__UART3_RX_DATA           0x0b4 0x3c8 0x930 0x2 0x0
-#define MX6Q_PAD_EIM_D24__ECSPI1_SS2              0x0b4 0x3c8 0x808 0x3 0x0
-#define MX6Q_PAD_EIM_D24__ECSPI2_SS2              0x0b4 0x3c8 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D24__GPIO3_IO24              0x0b4 0x3c8 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D24__AUD5_RXFS               0x0b4 0x3c8 0x7d8 0x6 0x0
-#define MX6Q_PAD_EIM_D24__UART1_DTR_B             0x0b4 0x3c8 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_D25__EIM_DATA25              0x0b8 0x3cc 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D25__ECSPI4_SS3              0x0b8 0x3cc 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D25__UART3_RX_DATA           0x0b8 0x3cc 0x930 0x2 0x1
-#define MX6Q_PAD_EIM_D25__UART3_TX_DATA           0x0b8 0x3cc 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D25__ECSPI1_SS3              0x0b8 0x3cc 0x80c 0x3 0x0
-#define MX6Q_PAD_EIM_D25__ECSPI2_SS3              0x0b8 0x3cc 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D25__GPIO3_IO25              0x0b8 0x3cc 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D25__AUD5_RXC                0x0b8 0x3cc 0x7d4 0x6 0x0
-#define MX6Q_PAD_EIM_D25__UART1_DSR_B             0x0b8 0x3cc 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_D26__EIM_DATA26              0x0bc 0x3d0 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D26__IPU1_DI1_PIN11          0x0bc 0x3d0 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D26__IPU1_CSI0_DATA01        0x0bc 0x3d0 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D26__IPU2_CSI1_DATA14        0x0bc 0x3d0 0x8c0 0x3 0x0
-#define MX6Q_PAD_EIM_D26__UART2_TX_DATA           0x0bc 0x3d0 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D26__UART2_RX_DATA           0x0bc 0x3d0 0x928 0x4 0x0
-#define MX6Q_PAD_EIM_D26__GPIO3_IO26              0x0bc 0x3d0 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D26__IPU1_SISG2              0x0bc 0x3d0 0x000 0x6 0x0
-#define MX6Q_PAD_EIM_D26__IPU1_DISP1_DATA22       0x0bc 0x3d0 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_D27__EIM_DATA27              0x0c0 0x3d4 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D27__IPU1_DI1_PIN13          0x0c0 0x3d4 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D27__IPU1_CSI0_DATA00        0x0c0 0x3d4 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D27__IPU2_CSI1_DATA13        0x0c0 0x3d4 0x8bc 0x3 0x0
-#define MX6Q_PAD_EIM_D27__UART2_RX_DATA           0x0c0 0x3d4 0x928 0x4 0x1
-#define MX6Q_PAD_EIM_D27__UART2_TX_DATA           0x0c0 0x3d4 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D27__GPIO3_IO27              0x0c0 0x3d4 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D27__IPU1_SISG3              0x0c0 0x3d4 0x000 0x6 0x0
-#define MX6Q_PAD_EIM_D27__IPU1_DISP1_DATA23       0x0c0 0x3d4 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_D28__EIM_DATA28              0x0c4 0x3d8 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D28__I2C1_SDA                0x0c4 0x3d8 0x89c 0x1 0x0
-#define MX6Q_PAD_EIM_D28__ECSPI4_MOSI             0x0c4 0x3d8 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D28__IPU2_CSI1_DATA12        0x0c4 0x3d8 0x8b8 0x3 0x0
-#define MX6Q_PAD_EIM_D28__UART2_CTS_B             0x0c4 0x3d8 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D28__UART2_RTS_B             0x0c4 0x3d8 0x924 0x4 0x0
-#define MX6Q_PAD_EIM_D28__GPIO3_IO28              0x0c4 0x3d8 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D28__IPU1_EXT_TRIG           0x0c4 0x3d8 0x000 0x6 0x0
-#define MX6Q_PAD_EIM_D28__IPU1_DI0_PIN13          0x0c4 0x3d8 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_D29__EIM_DATA29              0x0c8 0x3dc 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D29__IPU1_DI1_PIN15          0x0c8 0x3dc 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D29__ECSPI4_SS0              0x0c8 0x3dc 0x824 0x2 0x1
-#define MX6Q_PAD_EIM_D29__UART2_RTS_B             0x0c8 0x3dc 0x924 0x4 0x1
-#define MX6Q_PAD_EIM_D29__UART2_CTS_B             0x0c8 0x3dc 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D29__GPIO3_IO29              0x0c8 0x3dc 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D29__IPU2_CSI1_VSYNC         0x0c8 0x3dc 0x8e4 0x6 0x0
-#define MX6Q_PAD_EIM_D29__IPU1_DI0_PIN14          0x0c8 0x3dc 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_D30__EIM_DATA30              0x0cc 0x3e0 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D30__IPU1_DISP1_DATA21       0x0cc 0x3e0 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D30__IPU1_DI0_PIN11          0x0cc 0x3e0 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D30__IPU1_CSI0_DATA03        0x0cc 0x3e0 0x000 0x3 0x0
-#define MX6Q_PAD_EIM_D30__UART3_CTS_B             0x0cc 0x3e0 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D30__UART3_RTS_B             0x0cc 0x3e0 0x92c 0x4 0x2
-#define MX6Q_PAD_EIM_D30__GPIO3_IO30              0x0cc 0x3e0 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D30__USB_H1_OC               0x0cc 0x3e0 0x948 0x6 0x0
-#define MX6Q_PAD_EIM_D31__EIM_DATA31              0x0d0 0x3e4 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_D31__IPU1_DISP1_DATA20       0x0d0 0x3e4 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_D31__IPU1_DI0_PIN12          0x0d0 0x3e4 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_D31__IPU1_CSI0_DATA02        0x0d0 0x3e4 0x000 0x3 0x0
-#define MX6Q_PAD_EIM_D31__UART3_RTS_B             0x0d0 0x3e4 0x92c 0x4 0x3
-#define MX6Q_PAD_EIM_D31__UART3_CTS_B             0x0d0 0x3e4 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_D31__GPIO3_IO31              0x0d0 0x3e4 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_D31__USB_H1_PWR              0x0d0 0x3e4 0x000 0x6 0x0
-#define MX6Q_PAD_EIM_A24__EIM_ADDR24              0x0d4 0x3e8 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A24__IPU1_DISP1_DATA19       0x0d4 0x3e8 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A24__IPU2_CSI1_DATA19        0x0d4 0x3e8 0x8d4 0x2 0x1
-#define MX6Q_PAD_EIM_A24__IPU2_SISG2              0x0d4 0x3e8 0x000 0x3 0x0
-#define MX6Q_PAD_EIM_A24__IPU1_SISG2              0x0d4 0x3e8 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_A24__GPIO5_IO04              0x0d4 0x3e8 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A24__SRC_BOOT_CFG24          0x0d4 0x3e8 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_A23__EIM_ADDR23              0x0d8 0x3ec 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A23__IPU1_DISP1_DATA18       0x0d8 0x3ec 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A23__IPU2_CSI1_DATA18        0x0d8 0x3ec 0x8d0 0x2 0x1
-#define MX6Q_PAD_EIM_A23__IPU2_SISG3              0x0d8 0x3ec 0x000 0x3 0x0
-#define MX6Q_PAD_EIM_A23__IPU1_SISG3              0x0d8 0x3ec 0x000 0x4 0x0
-#define MX6Q_PAD_EIM_A23__GPIO6_IO06              0x0d8 0x3ec 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A23__SRC_BOOT_CFG23          0x0d8 0x3ec 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_A22__EIM_ADDR22              0x0dc 0x3f0 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A22__IPU1_DISP1_DATA17       0x0dc 0x3f0 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A22__IPU2_CSI1_DATA17        0x0dc 0x3f0 0x8cc 0x2 0x1
-#define MX6Q_PAD_EIM_A22__GPIO2_IO16              0x0dc 0x3f0 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A22__SRC_BOOT_CFG22          0x0dc 0x3f0 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_A21__EIM_ADDR21              0x0e0 0x3f4 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A21__IPU1_DISP1_DATA16       0x0e0 0x3f4 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A21__IPU2_CSI1_DATA16        0x0e0 0x3f4 0x8c8 0x2 0x1
-#define MX6Q_PAD_EIM_A21__GPIO2_IO17              0x0e0 0x3f4 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A21__SRC_BOOT_CFG21          0x0e0 0x3f4 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_A20__EIM_ADDR20              0x0e4 0x3f8 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A20__IPU1_DISP1_DATA15       0x0e4 0x3f8 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A20__IPU2_CSI1_DATA15        0x0e4 0x3f8 0x8c4 0x2 0x1
-#define MX6Q_PAD_EIM_A20__GPIO2_IO18              0x0e4 0x3f8 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A20__SRC_BOOT_CFG20          0x0e4 0x3f8 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_A19__EIM_ADDR19              0x0e8 0x3fc 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A19__IPU1_DISP1_DATA14       0x0e8 0x3fc 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A19__IPU2_CSI1_DATA14        0x0e8 0x3fc 0x8c0 0x2 0x1
-#define MX6Q_PAD_EIM_A19__GPIO2_IO19              0x0e8 0x3fc 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A19__SRC_BOOT_CFG19          0x0e8 0x3fc 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_A18__EIM_ADDR18              0x0ec 0x400 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A18__IPU1_DISP1_DATA13       0x0ec 0x400 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A18__IPU2_CSI1_DATA13        0x0ec 0x400 0x8bc 0x2 0x1
-#define MX6Q_PAD_EIM_A18__GPIO2_IO20              0x0ec 0x400 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A18__SRC_BOOT_CFG18          0x0ec 0x400 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_A17__EIM_ADDR17              0x0f0 0x404 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A17__IPU1_DISP1_DATA12       0x0f0 0x404 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A17__IPU2_CSI1_DATA12        0x0f0 0x404 0x8b8 0x2 0x1
-#define MX6Q_PAD_EIM_A17__GPIO2_IO21              0x0f0 0x404 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A17__SRC_BOOT_CFG17          0x0f0 0x404 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_A16__EIM_ADDR16              0x0f4 0x408 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_A16__IPU1_DI1_DISP_CLK       0x0f4 0x408 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_A16__IPU2_CSI1_PIXCLK        0x0f4 0x408 0x8e0 0x2 0x1
-#define MX6Q_PAD_EIM_A16__GPIO2_IO22              0x0f4 0x408 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_A16__SRC_BOOT_CFG16          0x0f4 0x408 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_CS0__EIM_CS0_B               0x0f8 0x40c 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_CS0__IPU1_DI1_PIN05          0x0f8 0x40c 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_CS0__ECSPI2_SCLK             0x0f8 0x40c 0x810 0x2 0x0
-#define MX6Q_PAD_EIM_CS0__GPIO2_IO23              0x0f8 0x40c 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_CS1__EIM_CS1_B               0x0fc 0x410 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_CS1__IPU1_DI1_PIN06          0x0fc 0x410 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_CS1__ECSPI2_MOSI             0x0fc 0x410 0x818 0x2 0x0
-#define MX6Q_PAD_EIM_CS1__GPIO2_IO24              0x0fc 0x410 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_OE__EIM_OE_B                 0x100 0x414 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_OE__IPU1_DI1_PIN07           0x100 0x414 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_OE__ECSPI2_MISO              0x100 0x414 0x814 0x2 0x0
-#define MX6Q_PAD_EIM_OE__GPIO2_IO25               0x100 0x414 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_RW__EIM_RW                   0x104 0x418 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_RW__IPU1_DI1_PIN08           0x104 0x418 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_RW__ECSPI2_SS0               0x104 0x418 0x81c 0x2 0x0
-#define MX6Q_PAD_EIM_RW__GPIO2_IO26               0x104 0x418 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_RW__SRC_BOOT_CFG29           0x104 0x418 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_LBA__EIM_LBA_B               0x108 0x41c 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_LBA__IPU1_DI1_PIN17          0x108 0x41c 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_LBA__ECSPI2_SS1              0x108 0x41c 0x820 0x2 0x0
-#define MX6Q_PAD_EIM_LBA__GPIO2_IO27              0x108 0x41c 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_LBA__SRC_BOOT_CFG26          0x108 0x41c 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_EB0__EIM_EB0_B               0x10c 0x420 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_EB0__IPU1_DISP1_DATA11       0x10c 0x420 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_EB0__IPU2_CSI1_DATA11        0x10c 0x420 0x8b4 0x2 0x1
-#define MX6Q_PAD_EIM_EB0__CCM_PMIC_READY          0x10c 0x420 0x7f0 0x4 0x0
-#define MX6Q_PAD_EIM_EB0__GPIO2_IO28              0x10c 0x420 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_EB0__SRC_BOOT_CFG27          0x10c 0x420 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_EB1__EIM_EB1_B               0x110 0x424 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_EB1__IPU1_DISP1_DATA10       0x110 0x424 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_EB1__IPU2_CSI1_DATA10        0x110 0x424 0x8b0 0x2 0x1
-#define MX6Q_PAD_EIM_EB1__GPIO2_IO29              0x110 0x424 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_EB1__SRC_BOOT_CFG28          0x110 0x424 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA0__EIM_AD00                0x114 0x428 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA0__IPU1_DISP1_DATA09       0x114 0x428 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA0__IPU2_CSI1_DATA09        0x114 0x428 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA0__GPIO3_IO00              0x114 0x428 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA0__SRC_BOOT_CFG00          0x114 0x428 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA1__EIM_AD01                0x118 0x42c 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA1__IPU1_DISP1_DATA08       0x118 0x42c 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA1__IPU2_CSI1_DATA08        0x118 0x42c 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA1__GPIO3_IO01              0x118 0x42c 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA1__SRC_BOOT_CFG01          0x118 0x42c 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA2__EIM_AD02                0x11c 0x430 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA2__IPU1_DISP1_DATA07       0x11c 0x430 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA2__IPU2_CSI1_DATA07        0x11c 0x430 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA2__GPIO3_IO02              0x11c 0x430 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA2__SRC_BOOT_CFG02          0x11c 0x430 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA3__EIM_AD03                0x120 0x434 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA3__IPU1_DISP1_DATA06       0x120 0x434 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA3__IPU2_CSI1_DATA06        0x120 0x434 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA3__GPIO3_IO03              0x120 0x434 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA3__SRC_BOOT_CFG03          0x120 0x434 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA4__EIM_AD04                0x124 0x438 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA4__IPU1_DISP1_DATA05       0x124 0x438 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA4__IPU2_CSI1_DATA05        0x124 0x438 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA4__GPIO3_IO04              0x124 0x438 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA4__SRC_BOOT_CFG04          0x124 0x438 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA5__EIM_AD05                0x128 0x43c 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA5__IPU1_DISP1_DATA04       0x128 0x43c 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA5__IPU2_CSI1_DATA04        0x128 0x43c 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA5__GPIO3_IO05              0x128 0x43c 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA5__SRC_BOOT_CFG05          0x128 0x43c 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA6__EIM_AD06                0x12c 0x440 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA6__IPU1_DISP1_DATA03       0x12c 0x440 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA6__IPU2_CSI1_DATA03        0x12c 0x440 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA6__GPIO3_IO06              0x12c 0x440 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA6__SRC_BOOT_CFG06          0x12c 0x440 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA7__EIM_AD07                0x130 0x444 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA7__IPU1_DISP1_DATA02       0x130 0x444 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA7__IPU2_CSI1_DATA02        0x130 0x444 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA7__GPIO3_IO07              0x130 0x444 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA7__SRC_BOOT_CFG07          0x130 0x444 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA8__EIM_AD08                0x134 0x448 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA8__IPU1_DISP1_DATA01       0x134 0x448 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA8__IPU2_CSI1_DATA01        0x134 0x448 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA8__GPIO3_IO08              0x134 0x448 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA8__SRC_BOOT_CFG08          0x134 0x448 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA9__EIM_AD09                0x138 0x44c 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA9__IPU1_DISP1_DATA00       0x138 0x44c 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA9__IPU2_CSI1_DATA00        0x138 0x44c 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA9__GPIO3_IO09              0x138 0x44c 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA9__SRC_BOOT_CFG09          0x138 0x44c 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA10__EIM_AD10               0x13c 0x450 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA10__IPU1_DI1_PIN15         0x13c 0x450 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA10__IPU2_CSI1_DATA_EN      0x13c 0x450 0x8d8 0x2 0x1
-#define MX6Q_PAD_EIM_DA10__GPIO3_IO10             0x13c 0x450 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA10__SRC_BOOT_CFG10         0x13c 0x450 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA11__EIM_AD11               0x140 0x454 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA11__IPU1_DI1_PIN02         0x140 0x454 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA11__IPU2_CSI1_HSYNC        0x140 0x454 0x8dc 0x2 0x1
-#define MX6Q_PAD_EIM_DA11__GPIO3_IO11             0x140 0x454 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA11__SRC_BOOT_CFG11         0x140 0x454 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA12__EIM_AD12               0x144 0x458 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA12__IPU1_DI1_PIN03         0x144 0x458 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA12__IPU2_CSI1_VSYNC        0x144 0x458 0x8e4 0x2 0x1
-#define MX6Q_PAD_EIM_DA12__GPIO3_IO12             0x144 0x458 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA12__SRC_BOOT_CFG12         0x144 0x458 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA13__EIM_AD13               0x148 0x45c 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA13__IPU1_DI1_D0_CS         0x148 0x45c 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA13__GPIO3_IO13             0x148 0x45c 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA13__SRC_BOOT_CFG13         0x148 0x45c 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA14__EIM_AD14               0x14c 0x460 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA14__IPU1_DI1_D1_CS         0x14c 0x460 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA14__GPIO3_IO14             0x14c 0x460 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA14__SRC_BOOT_CFG14         0x14c 0x460 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_DA15__EIM_AD15               0x150 0x464 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN01         0x150 0x464 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN04         0x150 0x464 0x000 0x2 0x0
-#define MX6Q_PAD_EIM_DA15__GPIO3_IO15             0x150 0x464 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_DA15__SRC_BOOT_CFG15         0x150 0x464 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_WAIT__EIM_WAIT_B             0x154 0x468 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_WAIT__EIM_DTACK_B            0x154 0x468 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_WAIT__GPIO5_IO00             0x154 0x468 0x000 0x5 0x0
-#define MX6Q_PAD_EIM_WAIT__SRC_BOOT_CFG25         0x154 0x468 0x000 0x7 0x0
-#define MX6Q_PAD_EIM_BCLK__EIM_BCLK               0x158 0x46c 0x000 0x0 0x0
-#define MX6Q_PAD_EIM_BCLK__IPU1_DI1_PIN16         0x158 0x46c 0x000 0x1 0x0
-#define MX6Q_PAD_EIM_BCLK__GPIO6_IO31             0x158 0x46c 0x000 0x5 0x0
-#define MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK  0x15c 0x470 0x000 0x0 0x0
-#define MX6Q_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK  0x15c 0x470 0x000 0x1 0x0
-#define MX6Q_PAD_DI0_DISP_CLK__GPIO4_IO16         0x15c 0x470 0x000 0x5 0x0
-#define MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15        0x160 0x474 0x000 0x0 0x0
-#define MX6Q_PAD_DI0_PIN15__IPU2_DI0_PIN15        0x160 0x474 0x000 0x1 0x0
-#define MX6Q_PAD_DI0_PIN15__AUD6_TXC              0x160 0x474 0x000 0x2 0x0
-#define MX6Q_PAD_DI0_PIN15__GPIO4_IO17            0x160 0x474 0x000 0x5 0x0
-#define MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN02         0x164 0x478 0x000 0x0 0x0
-#define MX6Q_PAD_DI0_PIN2__IPU2_DI0_PIN02         0x164 0x478 0x000 0x1 0x0
-#define MX6Q_PAD_DI0_PIN2__AUD6_TXD               0x164 0x478 0x000 0x2 0x0
-#define MX6Q_PAD_DI0_PIN2__GPIO4_IO18             0x164 0x478 0x000 0x5 0x0
-#define MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN03         0x168 0x47c 0x000 0x0 0x0
-#define MX6Q_PAD_DI0_PIN3__IPU2_DI0_PIN03         0x168 0x47c 0x000 0x1 0x0
-#define MX6Q_PAD_DI0_PIN3__AUD6_TXFS              0x168 0x47c 0x000 0x2 0x0
-#define MX6Q_PAD_DI0_PIN3__GPIO4_IO19             0x168 0x47c 0x000 0x5 0x0
-#define MX6Q_PAD_DI0_PIN4__IPU1_DI0_PIN04         0x16c 0x480 0x000 0x0 0x0
-#define MX6Q_PAD_DI0_PIN4__IPU2_DI0_PIN04         0x16c 0x480 0x000 0x1 0x0
-#define MX6Q_PAD_DI0_PIN4__AUD6_RXD               0x16c 0x480 0x000 0x2 0x0
-#define MX6Q_PAD_DI0_PIN4__SD1_WP                 0x16c 0x480 0x94c 0x3 0x0
-#define MX6Q_PAD_DI0_PIN4__GPIO4_IO20             0x16c 0x480 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DATA00    0x170 0x484 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT0__IPU2_DISP0_DATA00    0x170 0x484 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT0__ECSPI3_SCLK          0x170 0x484 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT0__GPIO4_IO21           0x170 0x484 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DATA01    0x174 0x488 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT1__IPU2_DISP0_DATA01    0x174 0x488 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT1__ECSPI3_MOSI          0x174 0x488 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT1__GPIO4_IO22           0x174 0x488 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DATA02    0x178 0x48c 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT2__IPU2_DISP0_DATA02    0x178 0x48c 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT2__ECSPI3_MISO          0x178 0x48c 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT2__GPIO4_IO23           0x178 0x48c 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DATA03    0x17c 0x490 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT3__IPU2_DISP0_DATA03    0x17c 0x490 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT3__ECSPI3_SS0           0x17c 0x490 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT3__GPIO4_IO24           0x17c 0x490 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DATA04    0x180 0x494 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT4__IPU2_DISP0_DATA04    0x180 0x494 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT4__ECSPI3_SS1           0x180 0x494 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT4__GPIO4_IO25           0x180 0x494 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DATA05    0x184 0x498 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT5__IPU2_DISP0_DATA05    0x184 0x498 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT5__ECSPI3_SS2           0x184 0x498 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT5__AUD6_RXFS            0x184 0x498 0x000 0x3 0x0
-#define MX6Q_PAD_DISP0_DAT5__GPIO4_IO26           0x184 0x498 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DATA06    0x188 0x49c 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT6__IPU2_DISP0_DATA06    0x188 0x49c 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT6__ECSPI3_SS3           0x188 0x49c 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT6__AUD6_RXC             0x188 0x49c 0x000 0x3 0x0
-#define MX6Q_PAD_DISP0_DAT6__GPIO4_IO27           0x188 0x49c 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DATA07    0x18c 0x4a0 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT7__IPU2_DISP0_DATA07    0x18c 0x4a0 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT7__ECSPI3_RDY           0x18c 0x4a0 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT7__GPIO4_IO28           0x18c 0x4a0 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DATA08    0x190 0x4a4 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT8__IPU2_DISP0_DATA08    0x190 0x4a4 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT8__PWM1_OUT             0x190 0x4a4 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT8__WDOG1_B              0x190 0x4a4 0x000 0x3 0x0
-#define MX6Q_PAD_DISP0_DAT8__GPIO4_IO29           0x190 0x4a4 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DATA09    0x194 0x4a8 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT9__IPU2_DISP0_DATA09    0x194 0x4a8 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT9__PWM2_OUT             0x194 0x4a8 0x000 0x2 0x0
-#define MX6Q_PAD_DISP0_DAT9__WDOG2_B              0x194 0x4a8 0x000 0x3 0x0
-#define MX6Q_PAD_DISP0_DAT9__GPIO4_IO30           0x194 0x4a8 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DATA10   0x198 0x4ac 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT10__IPU2_DISP0_DATA10   0x198 0x4ac 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT10__GPIO4_IO31          0x198 0x4ac 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DATA11   0x19c 0x4b0 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT11__IPU2_DISP0_DATA11   0x19c 0x4b0 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT11__GPIO5_IO05          0x19c 0x4b0 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DATA12   0x1a0 0x4b4 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT12__IPU2_DISP0_DATA12   0x1a0 0x4b4 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT12__GPIO5_IO06          0x1a0 0x4b4 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DATA13   0x1a4 0x4b8 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT13__IPU2_DISP0_DATA13   0x1a4 0x4b8 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT13__AUD5_RXFS           0x1a4 0x4b8 0x7d8 0x3 0x1
-#define MX6Q_PAD_DISP0_DAT13__GPIO5_IO07          0x1a4 0x4b8 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DATA14   0x1a8 0x4bc 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT14__IPU2_DISP0_DATA14   0x1a8 0x4bc 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT14__AUD5_RXC            0x1a8 0x4bc 0x7d4 0x3 0x1
-#define MX6Q_PAD_DISP0_DAT14__GPIO5_IO08          0x1a8 0x4bc 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DATA15   0x1ac 0x4c0 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT15__IPU2_DISP0_DATA15   0x1ac 0x4c0 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT15__ECSPI1_SS1          0x1ac 0x4c0 0x804 0x2 0x1
-#define MX6Q_PAD_DISP0_DAT15__ECSPI2_SS1          0x1ac 0x4c0 0x820 0x3 0x1
-#define MX6Q_PAD_DISP0_DAT15__GPIO5_IO09          0x1ac 0x4c0 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DATA16   0x1b0 0x4c4 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT16__IPU2_DISP0_DATA16   0x1b0 0x4c4 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT16__ECSPI2_MOSI         0x1b0 0x4c4 0x818 0x2 0x1
-#define MX6Q_PAD_DISP0_DAT16__AUD5_TXC            0x1b0 0x4c4 0x7dc 0x3 0x0
-#define MX6Q_PAD_DISP0_DAT16__SDMA_EXT_EVENT0     0x1b0 0x4c4 0x90c 0x4 0x0
-#define MX6Q_PAD_DISP0_DAT16__GPIO5_IO10          0x1b0 0x4c4 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DATA17   0x1b4 0x4c8 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT17__IPU2_DISP0_DATA17   0x1b4 0x4c8 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT17__ECSPI2_MISO         0x1b4 0x4c8 0x814 0x2 0x1
-#define MX6Q_PAD_DISP0_DAT17__AUD5_TXD            0x1b4 0x4c8 0x7d0 0x3 0x0
-#define MX6Q_PAD_DISP0_DAT17__SDMA_EXT_EVENT1     0x1b4 0x4c8 0x910 0x4 0x0
-#define MX6Q_PAD_DISP0_DAT17__GPIO5_IO11          0x1b4 0x4c8 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DATA18   0x1b8 0x4cc 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT18__IPU2_DISP0_DATA18   0x1b8 0x4cc 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT18__ECSPI2_SS0          0x1b8 0x4cc 0x81c 0x2 0x1
-#define MX6Q_PAD_DISP0_DAT18__AUD5_TXFS           0x1b8 0x4cc 0x7e0 0x3 0x0
-#define MX6Q_PAD_DISP0_DAT18__AUD4_RXFS           0x1b8 0x4cc 0x7c0 0x4 0x0
-#define MX6Q_PAD_DISP0_DAT18__GPIO5_IO12          0x1b8 0x4cc 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT18__EIM_CS2_B           0x1b8 0x4cc 0x000 0x7 0x0
-#define MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DATA19   0x1bc 0x4d0 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT19__IPU2_DISP0_DATA19   0x1bc 0x4d0 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT19__ECSPI2_SCLK         0x1bc 0x4d0 0x810 0x2 0x1
-#define MX6Q_PAD_DISP0_DAT19__AUD5_RXD            0x1bc 0x4d0 0x7cc 0x3 0x0
-#define MX6Q_PAD_DISP0_DAT19__AUD4_RXC            0x1bc 0x4d0 0x7bc 0x4 0x0
-#define MX6Q_PAD_DISP0_DAT19__GPIO5_IO13          0x1bc 0x4d0 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT19__EIM_CS3_B           0x1bc 0x4d0 0x000 0x7 0x0
-#define MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DATA20   0x1c0 0x4d4 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT20__IPU2_DISP0_DATA20   0x1c0 0x4d4 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT20__ECSPI1_SCLK         0x1c0 0x4d4 0x7f4 0x2 0x1
-#define MX6Q_PAD_DISP0_DAT20__AUD4_TXC            0x1c0 0x4d4 0x7c4 0x3 0x0
-#define MX6Q_PAD_DISP0_DAT20__GPIO5_IO14          0x1c0 0x4d4 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DATA21   0x1c4 0x4d8 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT21__IPU2_DISP0_DATA21   0x1c4 0x4d8 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT21__ECSPI1_MOSI         0x1c4 0x4d8 0x7fc 0x2 0x1
-#define MX6Q_PAD_DISP0_DAT21__AUD4_TXD            0x1c4 0x4d8 0x7b8 0x3 0x1
-#define MX6Q_PAD_DISP0_DAT21__GPIO5_IO15          0x1c4 0x4d8 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DATA22   0x1c8 0x4dc 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT22__IPU2_DISP0_DATA22   0x1c8 0x4dc 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT22__ECSPI1_MISO         0x1c8 0x4dc 0x7f8 0x2 0x1
-#define MX6Q_PAD_DISP0_DAT22__AUD4_TXFS           0x1c8 0x4dc 0x7c8 0x3 0x1
-#define MX6Q_PAD_DISP0_DAT22__GPIO5_IO16          0x1c8 0x4dc 0x000 0x5 0x0
-#define MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DATA23   0x1cc 0x4e0 0x000 0x0 0x0
-#define MX6Q_PAD_DISP0_DAT23__IPU2_DISP0_DATA23   0x1cc 0x4e0 0x000 0x1 0x0
-#define MX6Q_PAD_DISP0_DAT23__ECSPI1_SS0          0x1cc 0x4e0 0x800 0x2 0x1
-#define MX6Q_PAD_DISP0_DAT23__AUD4_RXD            0x1cc 0x4e0 0x7b4 0x3 0x1
-#define MX6Q_PAD_DISP0_DAT23__GPIO5_IO17          0x1cc 0x4e0 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_MDIO__ENET_MDIO             0x1d0 0x4e4 0x840 0x1 0x0
-#define MX6Q_PAD_ENET_MDIO__ESAI_RX_CLK           0x1d0 0x4e4 0x86c 0x2 0x0
-#define MX6Q_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT  0x1d0 0x4e4 0x000 0x4 0x0
-#define MX6Q_PAD_ENET_MDIO__GPIO1_IO22            0x1d0 0x4e4 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_MDIO__SPDIF_LOCK            0x1d0 0x4e4 0x000 0x6 0x0
-#define MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK        0x1d4 0x4e8 0x000 0x1 0x0
-#define MX6Q_PAD_ENET_REF_CLK__ESAI_RX_FS         0x1d4 0x4e8 0x85c 0x2 0x0
-#define MX6Q_PAD_ENET_REF_CLK__GPIO1_IO23         0x1d4 0x4e8 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_REF_CLK__SPDIF_SR_CLK       0x1d4 0x4e8 0x000 0x6 0x0
-#define MX6Q_PAD_ENET_RX_ER__USB_OTG_ID           0x1d8 0x4ec 0x000 0x0 0x0
-#define MX6Q_PAD_ENET_RX_ER__ENET_RX_ER           0x1d8 0x4ec 0x000 0x1 0x0
-#define MX6Q_PAD_ENET_RX_ER__ESAI_RX_HF_CLK       0x1d8 0x4ec 0x864 0x2 0x0
-#define MX6Q_PAD_ENET_RX_ER__SPDIF_IN             0x1d8 0x4ec 0x914 0x3 0x1
-#define MX6Q_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1d8 0x4ec 0x000 0x4 0x0
-#define MX6Q_PAD_ENET_RX_ER__GPIO1_IO24           0x1d8 0x4ec 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_CRS_DV__ENET_RX_EN          0x1dc 0x4f0 0x858 0x1 0x1
-#define MX6Q_PAD_ENET_CRS_DV__ESAI_TX_CLK         0x1dc 0x4f0 0x870 0x2 0x0
-#define MX6Q_PAD_ENET_CRS_DV__SPDIF_EXT_CLK       0x1dc 0x4f0 0x918 0x3 0x1
-#define MX6Q_PAD_ENET_CRS_DV__GPIO1_IO25          0x1dc 0x4f0 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_RXD1__MLB_SIG               0x1e0 0x4f4 0x908 0x0 0x0
-#define MX6Q_PAD_ENET_RXD1__ENET_RX_DATA1         0x1e0 0x4f4 0x84c 0x1 0x1
-#define MX6Q_PAD_ENET_RXD1__ESAI_TX_FS            0x1e0 0x4f4 0x860 0x2 0x0
-#define MX6Q_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT  0x1e0 0x4f4 0x000 0x4 0x0
-#define MX6Q_PAD_ENET_RXD1__GPIO1_IO26            0x1e0 0x4f4 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_RXD0__ENET_RX_DATA0         0x1e4 0x4f8 0x848 0x1 0x1
-#define MX6Q_PAD_ENET_RXD0__ESAI_TX_HF_CLK        0x1e4 0x4f8 0x868 0x2 0x0
-#define MX6Q_PAD_ENET_RXD0__SPDIF_OUT             0x1e4 0x4f8 0x000 0x3 0x0
-#define MX6Q_PAD_ENET_RXD0__GPIO1_IO27            0x1e4 0x4f8 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_TX_EN__ENET_TX_EN           0x1e8 0x4fc 0x000 0x1 0x0
-#define MX6Q_PAD_ENET_TX_EN__ESAI_TX3_RX2         0x1e8 0x4fc 0x880 0x2 0x0
-#define MX6Q_PAD_ENET_TX_EN__GPIO1_IO28           0x1e8 0x4fc 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_TXD1__MLB_CLK               0x1ec 0x500 0x900 0x0 0x0
-#define MX6Q_PAD_ENET_TXD1__ENET_TX_DATA1         0x1ec 0x500 0x000 0x1 0x0
-#define MX6Q_PAD_ENET_TXD1__ESAI_TX2_RX3          0x1ec 0x500 0x87c 0x2 0x0
-#define MX6Q_PAD_ENET_TXD1__ENET_1588_EVENT0_IN   0x1ec 0x500 0x000 0x4 0x0
-#define MX6Q_PAD_ENET_TXD1__GPIO1_IO29            0x1ec 0x500 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_TXD0__ENET_TX_DATA0         0x1f0 0x504 0x000 0x1 0x0
-#define MX6Q_PAD_ENET_TXD0__ESAI_TX4_RX1          0x1f0 0x504 0x884 0x2 0x0
-#define MX6Q_PAD_ENET_TXD0__GPIO1_IO30            0x1f0 0x504 0x000 0x5 0x0
-#define MX6Q_PAD_ENET_MDC__MLB_DATA               0x1f4 0x508 0x904 0x0 0x0
-#define MX6Q_PAD_ENET_MDC__ENET_MDC               0x1f4 0x508 0x000 0x1 0x0
-#define MX6Q_PAD_ENET_MDC__ESAI_TX5_RX0           0x1f4 0x508 0x888 0x2 0x0
-#define MX6Q_PAD_ENET_MDC__ENET_1588_EVENT1_IN    0x1f4 0x508 0x000 0x4 0x0
-#define MX6Q_PAD_ENET_MDC__GPIO1_IO31             0x1f4 0x508 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_COL0__ECSPI1_SCLK            0x1f8 0x5c8 0x7f4 0x0 0x2
-#define MX6Q_PAD_KEY_COL0__ENET_RX_DATA3          0x1f8 0x5c8 0x854 0x1 0x1
-#define MX6Q_PAD_KEY_COL0__AUD5_TXC               0x1f8 0x5c8 0x7dc 0x2 0x1
-#define MX6Q_PAD_KEY_COL0__KEY_COL0               0x1f8 0x5c8 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_COL0__UART4_TX_DATA          0x1f8 0x5c8 0x000 0x4 0x0
-#define MX6Q_PAD_KEY_COL0__UART4_RX_DATA          0x1f8 0x5c8 0x938 0x4 0x0
-#define MX6Q_PAD_KEY_COL0__GPIO4_IO06             0x1f8 0x5c8 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_COL0__DCIC1_OUT              0x1f8 0x5c8 0x000 0x6 0x0
-#define MX6Q_PAD_KEY_ROW0__ECSPI1_MOSI            0x1fc 0x5cc 0x7fc 0x0 0x2
-#define MX6Q_PAD_KEY_ROW0__ENET_TX_DATA3          0x1fc 0x5cc 0x000 0x1 0x0
-#define MX6Q_PAD_KEY_ROW0__AUD5_TXD               0x1fc 0x5cc 0x7d0 0x2 0x1
-#define MX6Q_PAD_KEY_ROW0__KEY_ROW0               0x1fc 0x5cc 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_ROW0__UART4_RX_DATA          0x1fc 0x5cc 0x938 0x4 0x1
-#define MX6Q_PAD_KEY_ROW0__UART4_TX_DATA          0x1fc 0x5cc 0x000 0x4 0x0
-#define MX6Q_PAD_KEY_ROW0__GPIO4_IO07             0x1fc 0x5cc 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_ROW0__DCIC2_OUT              0x1fc 0x5cc 0x000 0x6 0x0
-#define MX6Q_PAD_KEY_COL1__ECSPI1_MISO            0x200 0x5d0 0x7f8 0x0 0x2
-#define MX6Q_PAD_KEY_COL1__ENET_MDIO              0x200 0x5d0 0x840 0x1 0x1
-#define MX6Q_PAD_KEY_COL1__AUD5_TXFS              0x200 0x5d0 0x7e0 0x2 0x1
-#define MX6Q_PAD_KEY_COL1__KEY_COL1               0x200 0x5d0 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_COL1__UART5_TX_DATA          0x200 0x5d0 0x000 0x4 0x0
-#define MX6Q_PAD_KEY_COL1__UART5_RX_DATA          0x200 0x5d0 0x940 0x4 0x0
-#define MX6Q_PAD_KEY_COL1__GPIO4_IO08             0x200 0x5d0 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_COL1__SD1_VSELECT            0x200 0x5d0 0x000 0x6 0x0
-#define MX6Q_PAD_KEY_ROW1__ECSPI1_SS0             0x204 0x5d4 0x800 0x0 0x2
-#define MX6Q_PAD_KEY_ROW1__ENET_COL               0x204 0x5d4 0x000 0x1 0x0
-#define MX6Q_PAD_KEY_ROW1__AUD5_RXD               0x204 0x5d4 0x7cc 0x2 0x1
-#define MX6Q_PAD_KEY_ROW1__KEY_ROW1               0x204 0x5d4 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_ROW1__UART5_RX_DATA          0x204 0x5d4 0x940 0x4 0x1
-#define MX6Q_PAD_KEY_ROW1__UART5_TX_DATA          0x204 0x5d4 0x000 0x4 0x0
-#define MX6Q_PAD_KEY_ROW1__GPIO4_IO09             0x204 0x5d4 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_ROW1__SD2_VSELECT            0x204 0x5d4 0x000 0x6 0x0
-#define MX6Q_PAD_KEY_COL2__ECSPI1_SS1             0x208 0x5d8 0x804 0x0 0x2
-#define MX6Q_PAD_KEY_COL2__ENET_RX_DATA2          0x208 0x5d8 0x850 0x1 0x1
-#define MX6Q_PAD_KEY_COL2__FLEXCAN1_TX            0x208 0x5d8 0x000 0x2 0x0
-#define MX6Q_PAD_KEY_COL2__KEY_COL2               0x208 0x5d8 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_COL2__ENET_MDC               0x208 0x5d8 0x000 0x4 0x0
-#define MX6Q_PAD_KEY_COL2__GPIO4_IO10             0x208 0x5d8 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE    0x208 0x5d8 0x000 0x6 0x0
-#define MX6Q_PAD_KEY_ROW2__ECSPI1_SS2             0x20c 0x5dc 0x808 0x0 0x1
-#define MX6Q_PAD_KEY_ROW2__ENET_TX_DATA2          0x20c 0x5dc 0x000 0x1 0x0
-#define MX6Q_PAD_KEY_ROW2__FLEXCAN1_RX            0x20c 0x5dc 0x7e4 0x2 0x0
-#define MX6Q_PAD_KEY_ROW2__KEY_ROW2               0x20c 0x5dc 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_ROW2__SD2_VSELECT            0x20c 0x5dc 0x000 0x4 0x0
-#define MX6Q_PAD_KEY_ROW2__GPIO4_IO11             0x20c 0x5dc 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_ROW2__HDMI_TX_CEC_LINE       0x20c 0x5dc 0x88c 0x6 0x1
-#define MX6Q_PAD_KEY_COL3__ECSPI1_SS3             0x210 0x5e0 0x80c 0x0 0x1
-#define MX6Q_PAD_KEY_COL3__ENET_CRS               0x210 0x5e0 0x000 0x1 0x0
-#define MX6Q_PAD_KEY_COL3__HDMI_TX_DDC_SCL        0x210 0x5e0 0x890 0x2 0x1
-#define MX6Q_PAD_KEY_COL3__KEY_COL3               0x210 0x5e0 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_COL3__I2C2_SCL               0x210 0x5e0 0x8a0 0x4 0x1
-#define MX6Q_PAD_KEY_COL3__GPIO4_IO12             0x210 0x5e0 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_COL3__SPDIF_IN               0x210 0x5e0 0x914 0x6 0x2
-#define MX6Q_PAD_KEY_ROW3__ASRC_EXT_CLK           0x214 0x5e4 0x7b0 0x1 0x0
-#define MX6Q_PAD_KEY_ROW3__HDMI_TX_DDC_SDA        0x214 0x5e4 0x894 0x2 0x1
-#define MX6Q_PAD_KEY_ROW3__KEY_ROW3               0x214 0x5e4 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_ROW3__I2C2_SDA               0x214 0x5e4 0x8a4 0x4 0x1
-#define MX6Q_PAD_KEY_ROW3__GPIO4_IO13             0x214 0x5e4 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_ROW3__SD1_VSELECT            0x214 0x5e4 0x000 0x6 0x0
-#define MX6Q_PAD_KEY_COL4__FLEXCAN2_TX            0x218 0x5e8 0x000 0x0 0x0
-#define MX6Q_PAD_KEY_COL4__IPU1_SISG4             0x218 0x5e8 0x000 0x1 0x0
-#define MX6Q_PAD_KEY_COL4__USB_OTG_OC             0x218 0x5e8 0x944 0x2 0x1
-#define MX6Q_PAD_KEY_COL4__KEY_COL4               0x218 0x5e8 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_COL4__UART5_RTS_B            0x218 0x5e8 0x93c 0x4 0x0
-#define MX6Q_PAD_KEY_COL4__UART5_CTS_B            0x218 0x5e8 0x000 0x4 0x0
-#define MX6Q_PAD_KEY_COL4__GPIO4_IO14             0x218 0x5e8 0x000 0x5 0x0
-#define MX6Q_PAD_KEY_ROW4__FLEXCAN2_RX            0x21c 0x5ec 0x7e8 0x0 0x0
-#define MX6Q_PAD_KEY_ROW4__IPU1_SISG5             0x21c 0x5ec 0x000 0x1 0x0
-#define MX6Q_PAD_KEY_ROW4__USB_OTG_PWR            0x21c 0x5ec 0x000 0x2 0x0
-#define MX6Q_PAD_KEY_ROW4__KEY_ROW4               0x21c 0x5ec 0x000 0x3 0x0
-#define MX6Q_PAD_KEY_ROW4__UART5_CTS_B            0x21c 0x5ec 0x000 0x4 0x0
-#define MX6Q_PAD_KEY_ROW4__UART5_RTS_B            0x21c 0x5ec 0x93c 0x4 0x1
-#define MX6Q_PAD_KEY_ROW4__GPIO4_IO15             0x21c 0x5ec 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_0__CCM_CLKO1                0x220 0x5f0 0x000 0x0 0x0
-#define MX6Q_PAD_GPIO_0__KEY_COL5                 0x220 0x5f0 0x8e8 0x2 0x0
-#define MX6Q_PAD_GPIO_0__ASRC_EXT_CLK             0x220 0x5f0 0x7b0 0x3 0x1
-#define MX6Q_PAD_GPIO_0__EPIT1_OUT                0x220 0x5f0 0x000 0x4 0x0
-#define MX6Q_PAD_GPIO_0__GPIO1_IO00               0x220 0x5f0 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_0__USB_H1_PWR               0x220 0x5f0 0x000 0x6 0x0
-#define MX6Q_PAD_GPIO_0__SNVS_VIO_5               0x220 0x5f0 0x000 0x7 0x0
-#define MX6Q_PAD_GPIO_1__ESAI_RX_CLK              0x224 0x5f4 0x86c 0x0 0x1
-#define MX6Q_PAD_GPIO_1__WDOG2_B                  0x224 0x5f4 0x000 0x1 0x0
-#define MX6Q_PAD_GPIO_1__KEY_ROW5                 0x224 0x5f4 0x8f4 0x2 0x0
-#define MX6Q_PAD_GPIO_1__USB_OTG_ID               0x224 0x5f4 0x000 0x3 0x0
-#define MX6Q_PAD_GPIO_1__PWM2_OUT                 0x224 0x5f4 0x000 0x4 0x0
-#define MX6Q_PAD_GPIO_1__GPIO1_IO01               0x224 0x5f4 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_1__SD1_CD_B                 0x224 0x5f4 0x000 0x6 0x0
-#define MX6Q_PAD_GPIO_9__ESAI_RX_FS               0x228 0x5f8 0x85c 0x0 0x1
-#define MX6Q_PAD_GPIO_9__WDOG1_B                  0x228 0x5f8 0x000 0x1 0x0
-#define MX6Q_PAD_GPIO_9__KEY_COL6                 0x228 0x5f8 0x8ec 0x2 0x0
-#define MX6Q_PAD_GPIO_9__CCM_REF_EN_B             0x228 0x5f8 0x000 0x3 0x0
-#define MX6Q_PAD_GPIO_9__PWM1_OUT                 0x228 0x5f8 0x000 0x4 0x0
-#define MX6Q_PAD_GPIO_9__GPIO1_IO09               0x228 0x5f8 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_9__SD1_WP                   0x228 0x5f8 0x94c 0x6 0x1
-#define MX6Q_PAD_GPIO_3__ESAI_RX_HF_CLK           0x22c 0x5fc 0x864 0x0 0x1
-#define MX6Q_PAD_GPIO_3__I2C3_SCL                 0x22c 0x5fc 0x8a8 0x2 0x1
-#define MX6Q_PAD_GPIO_3__XTALOSC_REF_CLK_24M      0x22c 0x5fc 0x000 0x3 0x0
-#define MX6Q_PAD_GPIO_3__CCM_CLKO2                0x22c 0x5fc 0x000 0x4 0x0
-#define MX6Q_PAD_GPIO_3__GPIO1_IO03               0x22c 0x5fc 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_3__USB_H1_OC                0x22c 0x5fc 0x948 0x6 0x1
-#define MX6Q_PAD_GPIO_3__MLB_CLK                  0x22c 0x5fc 0x900 0x7 0x1
-#define MX6Q_PAD_GPIO_6__ESAI_TX_CLK              0x230 0x600 0x870 0x0 0x1
-#define MX6Q_PAD_GPIO_6__I2C3_SDA                 0x230 0x600 0x8ac 0x2 0x1
-#define MX6Q_PAD_GPIO_6__GPIO1_IO06               0x230 0x600 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_6__SD2_LCTL                 0x230 0x600 0x000 0x6 0x0
-#define MX6Q_PAD_GPIO_6__MLB_SIG                  0x230 0x600 0x908 0x7 0x1
-#define MX6Q_PAD_GPIO_2__ESAI_TX_FS               0x234 0x604 0x860 0x0 0x1
-#define MX6Q_PAD_GPIO_2__KEY_ROW6                 0x234 0x604 0x8f8 0x2 0x1
-#define MX6Q_PAD_GPIO_2__GPIO1_IO02               0x234 0x604 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_2__SD2_WP                   0x234 0x604 0x000 0x6 0x0
-#define MX6Q_PAD_GPIO_2__MLB_DATA                 0x234 0x604 0x904 0x7 0x1
-#define MX6Q_PAD_GPIO_4__ESAI_TX_HF_CLK           0x238 0x608 0x868 0x0 0x1
-#define MX6Q_PAD_GPIO_4__KEY_COL7                 0x238 0x608 0x8f0 0x2 0x1
-#define MX6Q_PAD_GPIO_4__GPIO1_IO04               0x238 0x608 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_4__SD2_CD_B                 0x238 0x608 0x000 0x6 0x0
-#define MX6Q_PAD_GPIO_5__ESAI_TX2_RX3             0x23c 0x60c 0x87c 0x0 0x1
-#define MX6Q_PAD_GPIO_5__KEY_ROW7                 0x23c 0x60c 0x8fc 0x2 0x1
-#define MX6Q_PAD_GPIO_5__CCM_CLKO1                0x23c 0x60c 0x000 0x3 0x0
-#define MX6Q_PAD_GPIO_5__GPIO1_IO05               0x23c 0x60c 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_5__I2C3_SCL                 0x23c 0x60c 0x8a8 0x6 0x2
-#define MX6Q_PAD_GPIO_5__ARM_EVENTI               0x23c 0x60c 0x000 0x7 0x0
-#define MX6Q_PAD_GPIO_7__ESAI_TX4_RX1             0x240 0x610 0x884 0x0 0x1
-#define MX6Q_PAD_GPIO_7__ECSPI5_RDY               0x240 0x610 0x000 0x1 0x0
-#define MX6Q_PAD_GPIO_7__EPIT1_OUT                0x240 0x610 0x000 0x2 0x0
-#define MX6Q_PAD_GPIO_7__FLEXCAN1_TX              0x240 0x610 0x000 0x3 0x0
-#define MX6Q_PAD_GPIO_7__UART2_TX_DATA            0x240 0x610 0x000 0x4 0x0
-#define MX6Q_PAD_GPIO_7__UART2_RX_DATA            0x240 0x610 0x928 0x4 0x2
-#define MX6Q_PAD_GPIO_7__GPIO1_IO07               0x240 0x610 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_7__SPDIF_LOCK               0x240 0x610 0x000 0x6 0x0
-#define MX6Q_PAD_GPIO_7__USB_OTG_HOST_MODE        0x240 0x610 0x000 0x7 0x0
-#define MX6Q_PAD_GPIO_8__ESAI_TX5_RX0             0x244 0x614 0x888 0x0 0x1
-#define MX6Q_PAD_GPIO_8__XTALOSC_REF_CLK_32K      0x244 0x614 0x000 0x1 0x0
-#define MX6Q_PAD_GPIO_8__EPIT2_OUT                0x244 0x614 0x000 0x2 0x0
-#define MX6Q_PAD_GPIO_8__FLEXCAN1_RX              0x244 0x614 0x7e4 0x3 0x1
-#define MX6Q_PAD_GPIO_8__UART2_RX_DATA            0x244 0x614 0x928 0x4 0x3
-#define MX6Q_PAD_GPIO_8__UART2_TX_DATA            0x244 0x614 0x000 0x4 0x0
-#define MX6Q_PAD_GPIO_8__GPIO1_IO08               0x244 0x614 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_8__SPDIF_SR_CLK             0x244 0x614 0x000 0x6 0x0
-#define MX6Q_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE     0x244 0x614 0x000 0x7 0x0
-#define MX6Q_PAD_GPIO_16__ESAI_TX3_RX2            0x248 0x618 0x880 0x0 0x1
-#define MX6Q_PAD_GPIO_16__ENET_1588_EVENT2_IN     0x248 0x618 0x000 0x1 0x0
-#define MX6Q_PAD_GPIO_16__ENET_REF_CLK            0x248 0x618 0x83c 0x2 0x1
-#define MX6Q_PAD_GPIO_16__SD1_LCTL                0x248 0x618 0x000 0x3 0x0
-#define MX6Q_PAD_GPIO_16__SPDIF_IN                0x248 0x618 0x914 0x4 0x3
-#define MX6Q_PAD_GPIO_16__GPIO7_IO11              0x248 0x618 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_16__I2C3_SDA                0x248 0x618 0x8ac 0x6 0x2
-#define MX6Q_PAD_GPIO_16__JTAG_DE_B               0x248 0x618 0x000 0x7 0x0
-#define MX6Q_PAD_GPIO_17__ESAI_TX0                0x24c 0x61c 0x874 0x0 0x0
-#define MX6Q_PAD_GPIO_17__ENET_1588_EVENT3_IN     0x24c 0x61c 0x000 0x1 0x0
-#define MX6Q_PAD_GPIO_17__CCM_PMIC_READY          0x24c 0x61c 0x7f0 0x2 0x1
-#define MX6Q_PAD_GPIO_17__SDMA_EXT_EVENT0         0x24c 0x61c 0x90c 0x3 0x1
-#define MX6Q_PAD_GPIO_17__SPDIF_OUT               0x24c 0x61c 0x000 0x4 0x0
-#define MX6Q_PAD_GPIO_17__GPIO7_IO12              0x24c 0x61c 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_18__ESAI_TX1                0x250 0x620 0x878 0x0 0x0
-#define MX6Q_PAD_GPIO_18__ENET_RX_CLK             0x250 0x620 0x844 0x1 0x1
-#define MX6Q_PAD_GPIO_18__SD3_VSELECT             0x250 0x620 0x000 0x2 0x0
-#define MX6Q_PAD_GPIO_18__SDMA_EXT_EVENT1         0x250 0x620 0x910 0x3 0x1
-#define MX6Q_PAD_GPIO_18__ASRC_EXT_CLK            0x250 0x620 0x7b0 0x4 0x2
-#define MX6Q_PAD_GPIO_18__GPIO7_IO13              0x250 0x620 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_18__SNVS_VIO_5_CTL          0x250 0x620 0x000 0x6 0x0
-#define MX6Q_PAD_GPIO_19__KEY_COL5                0x254 0x624 0x8e8 0x0 0x1
-#define MX6Q_PAD_GPIO_19__ENET_1588_EVENT0_OUT    0x254 0x624 0x000 0x1 0x0
-#define MX6Q_PAD_GPIO_19__SPDIF_OUT               0x254 0x624 0x000 0x2 0x0
-#define MX6Q_PAD_GPIO_19__CCM_CLKO1               0x254 0x624 0x000 0x3 0x0
-#define MX6Q_PAD_GPIO_19__ECSPI1_RDY              0x254 0x624 0x000 0x4 0x0
-#define MX6Q_PAD_GPIO_19__GPIO4_IO05              0x254 0x624 0x000 0x5 0x0
-#define MX6Q_PAD_GPIO_19__ENET_TX_ER              0x254 0x624 0x000 0x6 0x0
-#define MX6Q_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK    0x258 0x628 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_PIXCLK__GPIO5_IO18          0x258 0x628 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_PIXCLK__ARM_EVENTO          0x258 0x628 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC       0x25c 0x62c 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_MCLK__CCM_CLKO1             0x25c 0x62c 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_MCLK__GPIO5_IO19            0x25c 0x62c 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_MCLK__ARM_TRACE_CTL         0x25c 0x62c 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN  0x260 0x630 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DATA_EN__EIM_DATA00         0x260 0x630 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DATA_EN__GPIO5_IO20         0x260 0x630 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DATA_EN__ARM_TRACE_CLK      0x260 0x630 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC      0x264 0x634 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_VSYNC__EIM_DATA01           0x264 0x634 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_VSYNC__GPIO5_IO21           0x264 0x634 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_VSYNC__ARM_TRACE00          0x264 0x634 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT4__IPU1_CSI0_DATA04      0x268 0x638 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT4__EIM_DATA02            0x268 0x638 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT4__ECSPI1_SCLK           0x268 0x638 0x7f4 0x2 0x3
-#define MX6Q_PAD_CSI0_DAT4__KEY_COL5              0x268 0x638 0x8e8 0x3 0x2
-#define MX6Q_PAD_CSI0_DAT4__AUD3_TXC              0x268 0x638 0x000 0x4 0x0
-#define MX6Q_PAD_CSI0_DAT4__GPIO5_IO22            0x268 0x638 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT4__ARM_TRACE01           0x268 0x638 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT5__IPU1_CSI0_DATA05      0x26c 0x63c 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT5__EIM_DATA03            0x26c 0x63c 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT5__ECSPI1_MOSI           0x26c 0x63c 0x7fc 0x2 0x3
-#define MX6Q_PAD_CSI0_DAT5__KEY_ROW5              0x26c 0x63c 0x8f4 0x3 0x1
-#define MX6Q_PAD_CSI0_DAT5__AUD3_TXD              0x26c 0x63c 0x000 0x4 0x0
-#define MX6Q_PAD_CSI0_DAT5__GPIO5_IO23            0x26c 0x63c 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT5__ARM_TRACE02           0x26c 0x63c 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT6__IPU1_CSI0_DATA06      0x270 0x640 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT6__EIM_DATA04            0x270 0x640 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT6__ECSPI1_MISO           0x270 0x640 0x7f8 0x2 0x3
-#define MX6Q_PAD_CSI0_DAT6__KEY_COL6              0x270 0x640 0x8ec 0x3 0x1
-#define MX6Q_PAD_CSI0_DAT6__AUD3_TXFS             0x270 0x640 0x000 0x4 0x0
-#define MX6Q_PAD_CSI0_DAT6__GPIO5_IO24            0x270 0x640 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT6__ARM_TRACE03           0x270 0x640 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT7__IPU1_CSI0_DATA07      0x274 0x644 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT7__EIM_DATA05            0x274 0x644 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT7__ECSPI1_SS0            0x274 0x644 0x800 0x2 0x3
-#define MX6Q_PAD_CSI0_DAT7__KEY_ROW6              0x274 0x644 0x8f8 0x3 0x2
-#define MX6Q_PAD_CSI0_DAT7__AUD3_RXD              0x274 0x644 0x000 0x4 0x0
-#define MX6Q_PAD_CSI0_DAT7__GPIO5_IO25            0x274 0x644 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT7__ARM_TRACE04           0x274 0x644 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT8__IPU1_CSI0_DATA08      0x278 0x648 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT8__EIM_DATA06            0x278 0x648 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT8__ECSPI2_SCLK           0x278 0x648 0x810 0x2 0x2
-#define MX6Q_PAD_CSI0_DAT8__KEY_COL7              0x278 0x648 0x8f0 0x3 0x2
-#define MX6Q_PAD_CSI0_DAT8__I2C1_SDA              0x278 0x648 0x89c 0x4 0x1
-#define MX6Q_PAD_CSI0_DAT8__GPIO5_IO26            0x278 0x648 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT8__ARM_TRACE05           0x278 0x648 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT9__IPU1_CSI0_DATA09      0x27c 0x64c 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT9__EIM_DATA07            0x27c 0x64c 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT9__ECSPI2_MOSI           0x27c 0x64c 0x818 0x2 0x2
-#define MX6Q_PAD_CSI0_DAT9__KEY_ROW7              0x27c 0x64c 0x8fc 0x3 0x2
-#define MX6Q_PAD_CSI0_DAT9__I2C1_SCL              0x27c 0x64c 0x898 0x4 0x1
-#define MX6Q_PAD_CSI0_DAT9__GPIO5_IO27            0x27c 0x64c 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT9__ARM_TRACE06           0x27c 0x64c 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT10__IPU1_CSI0_DATA10     0x280 0x650 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT10__AUD3_RXC             0x280 0x650 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT10__ECSPI2_MISO          0x280 0x650 0x814 0x2 0x2
-#define MX6Q_PAD_CSI0_DAT10__UART1_TX_DATA        0x280 0x650 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT10__UART1_RX_DATA        0x280 0x650 0x920 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT10__GPIO5_IO28           0x280 0x650 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT10__ARM_TRACE07          0x280 0x650 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT11__IPU1_CSI0_DATA11     0x284 0x654 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT11__AUD3_RXFS            0x284 0x654 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT11__ECSPI2_SS0           0x284 0x654 0x81c 0x2 0x2
-#define MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA        0x284 0x654 0x920 0x3 0x1
-#define MX6Q_PAD_CSI0_DAT11__UART1_TX_DATA        0x284 0x654 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT11__GPIO5_IO29           0x284 0x654 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT11__ARM_TRACE08          0x284 0x654 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT12__IPU1_CSI0_DATA12     0x288 0x658 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT12__EIM_DATA08           0x288 0x658 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT12__UART4_TX_DATA        0x288 0x658 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT12__UART4_RX_DATA        0x288 0x658 0x938 0x3 0x2
-#define MX6Q_PAD_CSI0_DAT12__GPIO5_IO30           0x288 0x658 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT12__ARM_TRACE09          0x288 0x658 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT13__IPU1_CSI0_DATA13     0x28c 0x65c 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT13__EIM_DATA09           0x28c 0x65c 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT13__UART4_RX_DATA        0x28c 0x65c 0x938 0x3 0x3
-#define MX6Q_PAD_CSI0_DAT13__UART4_TX_DATA        0x28c 0x65c 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT13__GPIO5_IO31           0x28c 0x65c 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT13__ARM_TRACE10          0x28c 0x65c 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT14__IPU1_CSI0_DATA14     0x290 0x660 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT14__EIM_DATA10           0x290 0x660 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT14__UART5_TX_DATA        0x290 0x660 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT14__UART5_RX_DATA        0x290 0x660 0x940 0x3 0x2
-#define MX6Q_PAD_CSI0_DAT14__GPIO6_IO00           0x290 0x660 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT14__ARM_TRACE11          0x290 0x660 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT15__IPU1_CSI0_DATA15     0x294 0x664 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT15__EIM_DATA11           0x294 0x664 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT15__UART5_RX_DATA        0x294 0x664 0x940 0x3 0x3
-#define MX6Q_PAD_CSI0_DAT15__UART5_TX_DATA        0x294 0x664 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT15__GPIO6_IO01           0x294 0x664 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT15__ARM_TRACE12          0x294 0x664 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT16__IPU1_CSI0_DATA16     0x298 0x668 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT16__EIM_DATA12           0x298 0x668 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT16__UART4_RTS_B          0x298 0x668 0x934 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT16__UART4_CTS_B          0x298 0x668 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT16__GPIO6_IO02           0x298 0x668 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT16__ARM_TRACE13          0x298 0x668 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT17__IPU1_CSI0_DATA17     0x29c 0x66c 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT17__EIM_DATA13           0x29c 0x66c 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT17__UART4_CTS_B          0x29c 0x66c 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT17__UART4_RTS_B          0x29c 0x66c 0x934 0x3 0x1
-#define MX6Q_PAD_CSI0_DAT17__GPIO6_IO03           0x29c 0x66c 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT17__ARM_TRACE14          0x29c 0x66c 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT18__IPU1_CSI0_DATA18     0x2a0 0x670 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT18__EIM_DATA14           0x2a0 0x670 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT18__UART5_RTS_B          0x2a0 0x670 0x93c 0x3 0x2
-#define MX6Q_PAD_CSI0_DAT18__UART5_CTS_B          0x2a0 0x670 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT18__GPIO6_IO04           0x2a0 0x670 0x000 0x5 0x0
-#define MX6Q_PAD_CSI0_DAT18__ARM_TRACE15          0x2a0 0x670 0x000 0x7 0x0
-#define MX6Q_PAD_CSI0_DAT19__IPU1_CSI0_DATA19     0x2a4 0x674 0x000 0x0 0x0
-#define MX6Q_PAD_CSI0_DAT19__EIM_DATA15           0x2a4 0x674 0x000 0x1 0x0
-#define MX6Q_PAD_CSI0_DAT19__UART5_CTS_B          0x2a4 0x674 0x000 0x3 0x0
-#define MX6Q_PAD_CSI0_DAT19__UART5_RTS_B          0x2a4 0x674 0x93c 0x3 0x3
-#define MX6Q_PAD_CSI0_DAT19__GPIO6_IO05           0x2a4 0x674 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_DAT7__SD3_DATA7              0x2a8 0x690 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_DAT7__UART1_TX_DATA          0x2a8 0x690 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_DAT7__UART1_RX_DATA          0x2a8 0x690 0x920 0x1 0x2
-#define MX6Q_PAD_SD3_DAT7__GPIO6_IO17             0x2a8 0x690 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_DAT6__SD3_DATA6              0x2ac 0x694 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_DAT6__UART1_RX_DATA          0x2ac 0x694 0x920 0x1 0x3
-#define MX6Q_PAD_SD3_DAT6__UART1_TX_DATA          0x2ac 0x694 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_DAT6__GPIO6_IO18             0x2ac 0x694 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_DAT5__SD3_DATA5              0x2b0 0x698 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_DAT5__UART2_TX_DATA          0x2b0 0x698 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_DAT5__UART2_RX_DATA          0x2b0 0x698 0x928 0x1 0x4
-#define MX6Q_PAD_SD3_DAT5__GPIO7_IO00             0x2b0 0x698 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_DAT4__SD3_DATA4              0x2b4 0x69c 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_DAT4__UART2_RX_DATA          0x2b4 0x69c 0x928 0x1 0x5
-#define MX6Q_PAD_SD3_DAT4__UART2_TX_DATA          0x2b4 0x69c 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_DAT4__GPIO7_IO01             0x2b4 0x69c 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_CMD__SD3_CMD                 0x2b8 0x6a0 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_CMD__UART2_CTS_B             0x2b8 0x6a0 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_CMD__UART2_RTS_B             0x2b8 0x6a0 0x924 0x1 0x2
-#define MX6Q_PAD_SD3_CMD__FLEXCAN1_TX             0x2b8 0x6a0 0x000 0x2 0x0
-#define MX6Q_PAD_SD3_CMD__GPIO7_IO02              0x2b8 0x6a0 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_CLK__SD3_CLK                 0x2bc 0x6a4 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_CLK__UART2_RTS_B             0x2bc 0x6a4 0x924 0x1 0x3
-#define MX6Q_PAD_SD3_CLK__UART2_CTS_B             0x2bc 0x6a4 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_CLK__FLEXCAN1_RX             0x2bc 0x6a4 0x7e4 0x2 0x2
-#define MX6Q_PAD_SD3_CLK__GPIO7_IO03              0x2bc 0x6a4 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_DAT0__SD3_DATA0              0x2c0 0x6a8 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_DAT0__UART1_CTS_B            0x2c0 0x6a8 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_DAT0__UART1_RTS_B            0x2c0 0x6a8 0x91c 0x1 0x2
-#define MX6Q_PAD_SD3_DAT0__FLEXCAN2_TX            0x2c0 0x6a8 0x000 0x2 0x0
-#define MX6Q_PAD_SD3_DAT0__GPIO7_IO04             0x2c0 0x6a8 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_DAT1__SD3_DATA1              0x2c4 0x6ac 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_DAT1__UART1_RTS_B            0x2c4 0x6ac 0x91c 0x1 0x3
-#define MX6Q_PAD_SD3_DAT1__UART1_CTS_B            0x2c4 0x6ac 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_DAT1__FLEXCAN2_RX            0x2c4 0x6ac 0x7e8 0x2 0x1
-#define MX6Q_PAD_SD3_DAT1__GPIO7_IO05             0x2c4 0x6ac 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_DAT2__SD3_DATA2              0x2c8 0x6b0 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_DAT2__GPIO7_IO06             0x2c8 0x6b0 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_DAT3__SD3_DATA3              0x2cc 0x6b4 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_DAT3__UART3_CTS_B            0x2cc 0x6b4 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_DAT3__UART3_RTS_B            0x2cc 0x6b4 0x92c 0x1 0x4
-#define MX6Q_PAD_SD3_DAT3__GPIO7_IO07             0x2cc 0x6b4 0x000 0x5 0x0
-#define MX6Q_PAD_SD3_RST__SD3_RESET               0x2d0 0x6b8 0x000 0x0 0x0
-#define MX6Q_PAD_SD3_RST__UART3_RTS_B             0x2d0 0x6b8 0x92c 0x1 0x5
-#define MX6Q_PAD_SD3_RST__UART3_CTS_B             0x2d0 0x6b8 0x000 0x1 0x0
-#define MX6Q_PAD_SD3_RST__GPIO7_IO08              0x2d0 0x6b8 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_CLE__NAND_CLE              0x2d4 0x6bc 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_CLE__IPU2_SISG4            0x2d4 0x6bc 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_CLE__GPIO6_IO07            0x2d4 0x6bc 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_ALE__NAND_ALE              0x2d8 0x6c0 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_ALE__SD4_RESET             0x2d8 0x6c0 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_ALE__GPIO6_IO08            0x2d8 0x6c0 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_WP_B__NAND_WP_B            0x2dc 0x6c4 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_WP_B__IPU2_SISG5           0x2dc 0x6c4 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_WP_B__GPIO6_IO09           0x2dc 0x6c4 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_RB0__NAND_READY_B          0x2e0 0x6c8 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_RB0__IPU2_DI0_PIN01        0x2e0 0x6c8 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_RB0__GPIO6_IO10            0x2e0 0x6c8 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_CS0__NAND_CE0_B            0x2e4 0x6cc 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_CS0__GPIO6_IO11            0x2e4 0x6cc 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_CS1__NAND_CE1_B            0x2e8 0x6d0 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_CS1__SD4_VSELECT           0x2e8 0x6d0 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_CS1__SD3_VSELECT           0x2e8 0x6d0 0x000 0x2 0x0
-#define MX6Q_PAD_NANDF_CS1__GPIO6_IO14            0x2e8 0x6d0 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_CS2__NAND_CE2_B            0x2ec 0x6d4 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_CS2__IPU1_SISG0            0x2ec 0x6d4 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_CS2__ESAI_TX0              0x2ec 0x6d4 0x874 0x2 0x1
-#define MX6Q_PAD_NANDF_CS2__EIM_CRE               0x2ec 0x6d4 0x000 0x3 0x0
-#define MX6Q_PAD_NANDF_CS2__CCM_CLKO2             0x2ec 0x6d4 0x000 0x4 0x0
-#define MX6Q_PAD_NANDF_CS2__GPIO6_IO15            0x2ec 0x6d4 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_CS2__IPU2_SISG0            0x2ec 0x6d4 0x000 0x6 0x0
-#define MX6Q_PAD_NANDF_CS3__NAND_CE3_B            0x2f0 0x6d8 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_CS3__IPU1_SISG1            0x2f0 0x6d8 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_CS3__ESAI_TX1              0x2f0 0x6d8 0x878 0x2 0x1
-#define MX6Q_PAD_NANDF_CS3__EIM_ADDR26            0x2f0 0x6d8 0x000 0x3 0x0
-#define MX6Q_PAD_NANDF_CS3__GPIO6_IO16            0x2f0 0x6d8 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_CS3__IPU2_SISG1            0x2f0 0x6d8 0x000 0x6 0x0
-#define MX6Q_PAD_SD4_CMD__SD4_CMD                 0x2f4 0x6dc 0x000 0x0 0x0
-#define MX6Q_PAD_SD4_CMD__NAND_RE_B               0x2f4 0x6dc 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_CMD__UART3_TX_DATA           0x2f4 0x6dc 0x000 0x2 0x0
-#define MX6Q_PAD_SD4_CMD__UART3_RX_DATA           0x2f4 0x6dc 0x930 0x2 0x2
-#define MX6Q_PAD_SD4_CMD__GPIO7_IO09              0x2f4 0x6dc 0x000 0x5 0x0
-#define MX6Q_PAD_SD4_CLK__SD4_CLK                 0x2f8 0x6e0 0x000 0x0 0x0
-#define MX6Q_PAD_SD4_CLK__NAND_WE_B               0x2f8 0x6e0 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_CLK__UART3_RX_DATA           0x2f8 0x6e0 0x930 0x2 0x3
-#define MX6Q_PAD_SD4_CLK__UART3_TX_DATA           0x2f8 0x6e0 0x000 0x2 0x0
-#define MX6Q_PAD_SD4_CLK__GPIO7_IO10              0x2f8 0x6e0 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_D0__NAND_DATA00            0x2fc 0x6e4 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_D0__SD1_DATA4              0x2fc 0x6e4 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_D0__GPIO2_IO00             0x2fc 0x6e4 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_D1__NAND_DATA01            0x300 0x6e8 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_D1__SD1_DATA5              0x300 0x6e8 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_D1__GPIO2_IO01             0x300 0x6e8 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_D2__NAND_DATA02            0x304 0x6ec 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_D2__SD1_DATA6              0x304 0x6ec 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_D2__GPIO2_IO02             0x304 0x6ec 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_D3__NAND_DATA03            0x308 0x6f0 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_D3__SD1_DATA7              0x308 0x6f0 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_D3__GPIO2_IO03             0x308 0x6f0 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_D4__NAND_DATA04            0x30c 0x6f4 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_D4__SD2_DATA4              0x30c 0x6f4 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_D4__GPIO2_IO04             0x30c 0x6f4 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_D5__NAND_DATA05            0x310 0x6f8 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_D5__SD2_DATA5              0x310 0x6f8 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_D5__GPIO2_IO05             0x310 0x6f8 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_D6__NAND_DATA06            0x314 0x6fc 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_D6__SD2_DATA6              0x314 0x6fc 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_D6__GPIO2_IO06             0x314 0x6fc 0x000 0x5 0x0
-#define MX6Q_PAD_NANDF_D7__NAND_DATA07            0x318 0x700 0x000 0x0 0x0
-#define MX6Q_PAD_NANDF_D7__SD2_DATA7              0x318 0x700 0x000 0x1 0x0
-#define MX6Q_PAD_NANDF_D7__GPIO2_IO07             0x318 0x700 0x000 0x5 0x0
-#define MX6Q_PAD_SD4_DAT0__SD4_DATA0              0x31c 0x704 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_DAT0__NAND_DQS               0x31c 0x704 0x000 0x2 0x0
-#define MX6Q_PAD_SD4_DAT0__GPIO2_IO08             0x31c 0x704 0x000 0x5 0x0
-#define MX6Q_PAD_SD4_DAT1__SD4_DATA1              0x320 0x708 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_DAT1__PWM3_OUT               0x320 0x708 0x000 0x2 0x0
-#define MX6Q_PAD_SD4_DAT1__GPIO2_IO09             0x320 0x708 0x000 0x5 0x0
-#define MX6Q_PAD_SD4_DAT2__SD4_DATA2              0x324 0x70c 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_DAT2__PWM4_OUT               0x324 0x70c 0x000 0x2 0x0
-#define MX6Q_PAD_SD4_DAT2__GPIO2_IO10             0x324 0x70c 0x000 0x5 0x0
-#define MX6Q_PAD_SD4_DAT3__SD4_DATA3              0x328 0x710 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_DAT3__GPIO2_IO11             0x328 0x710 0x000 0x5 0x0
-#define MX6Q_PAD_SD4_DAT4__SD4_DATA4              0x32c 0x714 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_DAT4__UART2_RX_DATA          0x32c 0x714 0x928 0x2 0x6
-#define MX6Q_PAD_SD4_DAT4__UART2_TX_DATA          0x32c 0x714 0x000 0x2 0x0
-#define MX6Q_PAD_SD4_DAT4__GPIO2_IO12             0x32c 0x714 0x000 0x5 0x0
-#define MX6Q_PAD_SD4_DAT5__SD4_DATA5              0x330 0x718 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_DAT5__UART2_RTS_B            0x330 0x718 0x924 0x2 0x4
-#define MX6Q_PAD_SD4_DAT5__UART2_CTS_B            0x330 0x718 0x000 0x2 0x0
-#define MX6Q_PAD_SD4_DAT5__GPIO2_IO13             0x330 0x718 0x000 0x5 0x0
-#define MX6Q_PAD_SD4_DAT6__SD4_DATA6              0x334 0x71c 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_DAT6__UART2_CTS_B            0x334 0x71c 0x000 0x2 0x0
-#define MX6Q_PAD_SD4_DAT6__UART2_RTS_B            0x334 0x71c 0x924 0x2 0x5
-#define MX6Q_PAD_SD4_DAT6__GPIO2_IO14             0x334 0x71c 0x000 0x5 0x0
-#define MX6Q_PAD_SD4_DAT7__SD4_DATA7              0x338 0x720 0x000 0x1 0x0
-#define MX6Q_PAD_SD4_DAT7__UART2_TX_DATA          0x338 0x720 0x000 0x2 0x0
-#define MX6Q_PAD_SD4_DAT7__UART2_RX_DATA          0x338 0x720 0x928 0x2 0x7
-#define MX6Q_PAD_SD4_DAT7__GPIO2_IO15             0x338 0x720 0x000 0x5 0x0
-#define MX6Q_PAD_SD1_DAT1__SD1_DATA1              0x33c 0x724 0x000 0x0 0x0
-#define MX6Q_PAD_SD1_DAT1__ECSPI5_SS0             0x33c 0x724 0x834 0x1 0x1
-#define MX6Q_PAD_SD1_DAT1__PWM3_OUT               0x33c 0x724 0x000 0x2 0x0
-#define MX6Q_PAD_SD1_DAT1__GPT_CAPTURE2           0x33c 0x724 0x000 0x3 0x0
-#define MX6Q_PAD_SD1_DAT1__GPIO1_IO17             0x33c 0x724 0x000 0x5 0x0
-#define MX6Q_PAD_SD1_DAT0__SD1_DATA0              0x340 0x728 0x000 0x0 0x0
-#define MX6Q_PAD_SD1_DAT0__ECSPI5_MISO            0x340 0x728 0x82c 0x1 0x1
-#define MX6Q_PAD_SD1_DAT0__GPT_CAPTURE1           0x340 0x728 0x000 0x3 0x0
-#define MX6Q_PAD_SD1_DAT0__GPIO1_IO16             0x340 0x728 0x000 0x5 0x0
-#define MX6Q_PAD_SD1_DAT3__SD1_DATA3              0x344 0x72c 0x000 0x0 0x0
-#define MX6Q_PAD_SD1_DAT3__ECSPI5_SS2             0x344 0x72c 0x000 0x1 0x0
-#define MX6Q_PAD_SD1_DAT3__GPT_COMPARE3           0x344 0x72c 0x000 0x2 0x0
-#define MX6Q_PAD_SD1_DAT3__PWM1_OUT               0x344 0x72c 0x000 0x3 0x0
-#define MX6Q_PAD_SD1_DAT3__WDOG2_B                0x344 0x72c 0x000 0x4 0x0
-#define MX6Q_PAD_SD1_DAT3__GPIO1_IO21             0x344 0x72c 0x000 0x5 0x0
-#define MX6Q_PAD_SD1_DAT3__WDOG2_RESET_B_DEB      0x344 0x72c 0x000 0x6 0x0
-#define MX6Q_PAD_SD1_CMD__SD1_CMD                 0x348 0x730 0x000 0x0 0x0
-#define MX6Q_PAD_SD1_CMD__ECSPI5_MOSI             0x348 0x730 0x830 0x1 0x0
-#define MX6Q_PAD_SD1_CMD__PWM4_OUT                0x348 0x730 0x000 0x2 0x0
-#define MX6Q_PAD_SD1_CMD__GPT_COMPARE1            0x348 0x730 0x000 0x3 0x0
-#define MX6Q_PAD_SD1_CMD__GPIO1_IO18              0x348 0x730 0x000 0x5 0x0
-#define MX6Q_PAD_SD1_DAT2__SD1_DATA2              0x34c 0x734 0x000 0x0 0x0
-#define MX6Q_PAD_SD1_DAT2__ECSPI5_SS1             0x34c 0x734 0x838 0x1 0x1
-#define MX6Q_PAD_SD1_DAT2__GPT_COMPARE2           0x34c 0x734 0x000 0x2 0x0
-#define MX6Q_PAD_SD1_DAT2__PWM2_OUT               0x34c 0x734 0x000 0x3 0x0
-#define MX6Q_PAD_SD1_DAT2__WDOG1_B                0x34c 0x734 0x000 0x4 0x0
-#define MX6Q_PAD_SD1_DAT2__GPIO1_IO19             0x34c 0x734 0x000 0x5 0x0
-#define MX6Q_PAD_SD1_DAT2__WDOG1_RESET_B_DEB      0x34c 0x734 0x000 0x6 0x0
-#define MX6Q_PAD_SD1_CLK__SD1_CLK                 0x350 0x738 0x000 0x0 0x0
-#define MX6Q_PAD_SD1_CLK__ECSPI5_SCLK             0x350 0x738 0x828 0x1 0x0
-#define MX6Q_PAD_SD1_CLK__GPT_CLKIN               0x350 0x738 0x000 0x3 0x0
-#define MX6Q_PAD_SD1_CLK__GPIO1_IO20              0x350 0x738 0x000 0x5 0x0
-#define MX6Q_PAD_SD2_CLK__SD2_CLK                 0x354 0x73c 0x000 0x0 0x0
-#define MX6Q_PAD_SD2_CLK__ECSPI5_SCLK             0x354 0x73c 0x828 0x1 0x1
-#define MX6Q_PAD_SD2_CLK__KEY_COL5                0x354 0x73c 0x8e8 0x2 0x3
-#define MX6Q_PAD_SD2_CLK__AUD4_RXFS               0x354 0x73c 0x7c0 0x3 0x1
-#define MX6Q_PAD_SD2_CLK__GPIO1_IO10              0x354 0x73c 0x000 0x5 0x0
-#define MX6Q_PAD_SD2_CMD__SD2_CMD                 0x358 0x740 0x000 0x0 0x0
-#define MX6Q_PAD_SD2_CMD__ECSPI5_MOSI             0x358 0x740 0x830 0x1 0x1
-#define MX6Q_PAD_SD2_CMD__KEY_ROW5                0x358 0x740 0x8f4 0x2 0x2
-#define MX6Q_PAD_SD2_CMD__AUD4_RXC                0x358 0x740 0x7bc 0x3 0x1
-#define MX6Q_PAD_SD2_CMD__GPIO1_IO11              0x358 0x740 0x000 0x5 0x0
-#define MX6Q_PAD_SD2_DAT3__SD2_DATA3              0x35c 0x744 0x000 0x0 0x0
-#define MX6Q_PAD_SD2_DAT3__ECSPI5_SS3             0x35c 0x744 0x000 0x1 0x0
-#define MX6Q_PAD_SD2_DAT3__KEY_COL6               0x35c 0x744 0x8ec 0x2 0x2
-#define MX6Q_PAD_SD2_DAT3__AUD4_TXC               0x35c 0x744 0x7c4 0x3 0x1
-#define MX6Q_PAD_SD2_DAT3__GPIO1_IO12             0x35c 0x744 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT1__SD2_DATA1              0x04c 0x360 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT1__ECSPI5_SS0             0x04c 0x360 0x834 0x1 0x0
+#define MX6QDL_PAD_SD2_DAT1__EIM_CS2_B              0x04c 0x360 0x000 0x2 0x0
+#define MX6QDL_PAD_SD2_DAT1__AUD4_TXFS              0x04c 0x360 0x7c8 0x3 0x0
+#define MX6QDL_PAD_SD2_DAT1__KEY_COL7               0x04c 0x360 0x8f0 0x4 0x0
+#define MX6QDL_PAD_SD2_DAT1__GPIO1_IO14             0x04c 0x360 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT2__SD2_DATA2              0x050 0x364 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT2__ECSPI5_SS1             0x050 0x364 0x838 0x1 0x0
+#define MX6QDL_PAD_SD2_DAT2__EIM_CS3_B              0x050 0x364 0x000 0x2 0x0
+#define MX6QDL_PAD_SD2_DAT2__AUD4_TXD               0x050 0x364 0x7b8 0x3 0x0
+#define MX6QDL_PAD_SD2_DAT2__KEY_ROW6               0x050 0x364 0x8f8 0x4 0x0
+#define MX6QDL_PAD_SD2_DAT2__GPIO1_IO13             0x050 0x364 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT0__SD2_DATA0              0x054 0x368 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT0__ECSPI5_MISO            0x054 0x368 0x82c 0x1 0x0
+#define MX6QDL_PAD_SD2_DAT0__AUD4_RXD               0x054 0x368 0x7b4 0x3 0x0
+#define MX6QDL_PAD_SD2_DAT0__KEY_ROW7               0x054 0x368 0x8fc 0x4 0x0
+#define MX6QDL_PAD_SD2_DAT0__GPIO1_IO15             0x054 0x368 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT0__DCIC2_OUT              0x054 0x368 0x000 0x6 0x0
+#define MX6QDL_PAD_RGMII_TXC__USB_H2_DATA           0x058 0x36c 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TXC__RGMII_TXC             0x058 0x36c 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TXC__SPDIF_EXT_CLK         0x058 0x36c 0x918 0x2 0x0
+#define MX6QDL_PAD_RGMII_TXC__GPIO6_IO19            0x058 0x36c 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M   0x058 0x36c 0x000 0x7 0x0
+#define MX6QDL_PAD_RGMII_TD0__HSI_TX_READY          0x05c 0x370 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD0__RGMII_TD0             0x05c 0x370 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD0__GPIO6_IO20            0x05c 0x370 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD1__HSI_RX_FLAG           0x060 0x374 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD1__RGMII_TD1             0x060 0x374 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD1__GPIO6_IO21            0x060 0x374 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD2__HSI_RX_DATA           0x064 0x378 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD2__RGMII_TD2             0x064 0x378 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD2__GPIO6_IO22            0x064 0x378 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD3__HSI_RX_WAKE           0x068 0x37c 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD3__RGMII_TD3             0x068 0x37c 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD3__GPIO6_IO23            0x068 0x37c 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA        0x06c 0x380 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL       0x06c 0x380 0x858 0x1 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__GPIO6_IO24         0x06c 0x380 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD0__HSI_RX_READY          0x070 0x384 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD0__RGMII_RD0             0x070 0x384 0x848 0x1 0x0
+#define MX6QDL_PAD_RGMII_RD0__GPIO6_IO25            0x070 0x384 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE      0x074 0x388 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL       0x074 0x388 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26         0x074 0x388 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__ENET_REF_CLK       0x074 0x388 0x83c 0x7 0x0
+#define MX6QDL_PAD_RGMII_RD1__HSI_TX_FLAG           0x078 0x38c 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD1__RGMII_RD1             0x078 0x38c 0x84c 0x1 0x0
+#define MX6QDL_PAD_RGMII_RD1__GPIO6_IO27            0x078 0x38c 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD2__HSI_TX_DATA           0x07c 0x390 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD2__RGMII_RD2             0x07c 0x390 0x850 0x1 0x0
+#define MX6QDL_PAD_RGMII_RD2__GPIO6_IO28            0x07c 0x390 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD3__HSI_TX_WAKE           0x080 0x394 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD3__RGMII_RD3             0x080 0x394 0x854 0x1 0x0
+#define MX6QDL_PAD_RGMII_RD3__GPIO6_IO29            0x080 0x394 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE         0x084 0x398 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RXC__RGMII_RXC             0x084 0x398 0x844 0x1 0x0
+#define MX6QDL_PAD_RGMII_RXC__GPIO6_IO30            0x084 0x398 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A25__EIM_ADDR25              0x088 0x39c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A25__ECSPI4_SS1              0x088 0x39c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A25__ECSPI2_RDY              0x088 0x39c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_A25__IPU1_DI1_PIN12          0x088 0x39c 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_A25__IPU1_DI0_D1_CS          0x088 0x39c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A25__GPIO5_IO02              0x088 0x39c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE        0x088 0x39c 0x88c 0x6 0x0
+#define MX6QDL_PAD_EIM_EB2__EIM_EB2_B               0x08c 0x3a0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB2__ECSPI1_SS0              0x08c 0x3a0 0x800 0x1 0x0
+#define MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19        0x08c 0x3a0 0x8d4 0x3 0x0
+#define MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL         0x08c 0x3a0 0x890 0x4 0x0
+#define MX6QDL_PAD_EIM_EB2__GPIO2_IO30              0x08c 0x3a0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB2__I2C2_SCL                0x08c 0x3a0 0x8a0 0x6 0x0
+#define MX6QDL_PAD_EIM_EB2__SRC_BOOT_CFG30          0x08c 0x3a0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D16__EIM_DATA16              0x090 0x3a4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D16__ECSPI1_SCLK             0x090 0x3a4 0x7f4 0x1 0x0
+#define MX6QDL_PAD_EIM_D16__IPU1_DI0_PIN05          0x090 0x3a4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18        0x090 0x3a4 0x8d0 0x3 0x0
+#define MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA         0x090 0x3a4 0x894 0x4 0x0
+#define MX6QDL_PAD_EIM_D16__GPIO3_IO16              0x090 0x3a4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D16__I2C2_SDA                0x090 0x3a4 0x8a4 0x6 0x0
+#define MX6QDL_PAD_EIM_D17__EIM_DATA17              0x094 0x3a8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D17__ECSPI1_MISO             0x094 0x3a8 0x7f8 0x1 0x0
+#define MX6QDL_PAD_EIM_D17__IPU1_DI0_PIN06          0x094 0x3a8 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D17__IPU2_CSI1_PIXCLK        0x094 0x3a8 0x8e0 0x3 0x0
+#define MX6QDL_PAD_EIM_D17__DCIC1_OUT               0x094 0x3a8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D17__GPIO3_IO17              0x094 0x3a8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D17__I2C3_SCL                0x094 0x3a8 0x8a8 0x6 0x0
+#define MX6QDL_PAD_EIM_D18__EIM_DATA18              0x098 0x3ac 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D18__ECSPI1_MOSI             0x098 0x3ac 0x7fc 0x1 0x0
+#define MX6QDL_PAD_EIM_D18__IPU1_DI0_PIN07          0x098 0x3ac 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17        0x098 0x3ac 0x8cc 0x3 0x0
+#define MX6QDL_PAD_EIM_D18__IPU1_DI1_D0_CS          0x098 0x3ac 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D18__GPIO3_IO18              0x098 0x3ac 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D18__I2C3_SDA                0x098 0x3ac 0x8ac 0x6 0x0
+#define MX6QDL_PAD_EIM_D19__EIM_DATA19              0x09c 0x3b0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D19__ECSPI1_SS1              0x09c 0x3b0 0x804 0x1 0x0
+#define MX6QDL_PAD_EIM_D19__IPU1_DI0_PIN08          0x09c 0x3b0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16        0x09c 0x3b0 0x8c8 0x3 0x0
+#define MX6QDL_PAD_EIM_D19__UART1_CTS_B             0x09c 0x3b0 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D19__UART1_RTS_B             0x09c 0x3b0 0x91c 0x4 0x0
+#define MX6QDL_PAD_EIM_D19__GPIO3_IO19              0x09c 0x3b0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D19__EPIT1_OUT               0x09c 0x3b0 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D20__EIM_DATA20              0x0a0 0x3b4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D20__ECSPI4_SS0              0x0a0 0x3b4 0x824 0x1 0x0
+#define MX6QDL_PAD_EIM_D20__IPU1_DI0_PIN16          0x0a0 0x3b4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15        0x0a0 0x3b4 0x8c4 0x3 0x0
+#define MX6QDL_PAD_EIM_D20__UART1_RTS_B             0x0a0 0x3b4 0x91c 0x4 0x1
+#define MX6QDL_PAD_EIM_D20__UART1_CTS_B             0x0a0 0x3b4 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D20__GPIO3_IO20              0x0a0 0x3b4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D20__EPIT2_OUT               0x0a0 0x3b4 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D21__EIM_DATA21              0x0a4 0x3b8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D21__ECSPI4_SCLK             0x0a4 0x3b8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D21__IPU1_DI0_PIN17          0x0a4 0x3b8 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D21__IPU2_CSI1_DATA11        0x0a4 0x3b8 0x8b4 0x3 0x0
+#define MX6QDL_PAD_EIM_D21__USB_OTG_OC              0x0a4 0x3b8 0x944 0x4 0x0
+#define MX6QDL_PAD_EIM_D21__GPIO3_IO21              0x0a4 0x3b8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D21__I2C1_SCL                0x0a4 0x3b8 0x898 0x6 0x0
+#define MX6QDL_PAD_EIM_D21__SPDIF_IN                0x0a4 0x3b8 0x914 0x7 0x0
+#define MX6QDL_PAD_EIM_D22__EIM_DATA22              0x0a8 0x3bc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D22__ECSPI4_MISO             0x0a8 0x3bc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D22__IPU1_DI0_PIN01          0x0a8 0x3bc 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D22__IPU2_CSI1_DATA10        0x0a8 0x3bc 0x8b0 0x3 0x0
+#define MX6QDL_PAD_EIM_D22__USB_OTG_PWR             0x0a8 0x3bc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D22__GPIO3_IO22              0x0a8 0x3bc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D22__SPDIF_OUT               0x0a8 0x3bc 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D23__EIM_DATA23              0x0ac 0x3c0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI0_D0_CS          0x0ac 0x3c0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D23__UART3_CTS_B             0x0ac 0x3c0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D23__UART3_RTS_B             0x0ac 0x3c0 0x92c 0x2 0x0
+#define MX6QDL_PAD_EIM_D23__UART1_DCD_B             0x0ac 0x3c0 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D23__IPU2_CSI1_DATA_EN       0x0ac 0x3c0 0x8d8 0x4 0x0
+#define MX6QDL_PAD_EIM_D23__GPIO3_IO23              0x0ac 0x3c0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN02          0x0ac 0x3c0 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN14          0x0ac 0x3c0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB3__EIM_EB3_B               0x0b0 0x3c4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB3__ECSPI4_RDY              0x0b0 0x3c4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB3__UART3_RTS_B             0x0b0 0x3c4 0x92c 0x2 0x1
+#define MX6QDL_PAD_EIM_EB3__UART3_CTS_B             0x0b0 0x3c4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_EB3__UART1_RI_B              0x0b0 0x3c4 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC         0x0b0 0x3c4 0x8dc 0x4 0x0
+#define MX6QDL_PAD_EIM_EB3__GPIO2_IO31              0x0b0 0x3c4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB3__IPU1_DI1_PIN03          0x0b0 0x3c4 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_EB3__SRC_BOOT_CFG31          0x0b0 0x3c4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D24__EIM_DATA24              0x0b4 0x3c8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI4_SS2              0x0b4 0x3c8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D24__UART3_TX_DATA           0x0b4 0x3c8 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D24__UART3_RX_DATA           0x0b4 0x3c8 0x930 0x2 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI1_SS2              0x0b4 0x3c8 0x808 0x3 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI2_SS2              0x0b4 0x3c8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D24__GPIO3_IO24              0x0b4 0x3c8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D24__AUD5_RXFS               0x0b4 0x3c8 0x7d8 0x6 0x0
+#define MX6QDL_PAD_EIM_D24__UART1_DTR_B             0x0b4 0x3c8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D25__EIM_DATA25              0x0b8 0x3cc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI4_SS3              0x0b8 0x3cc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D25__UART3_RX_DATA           0x0b8 0x3cc 0x930 0x2 0x1
+#define MX6QDL_PAD_EIM_D25__UART3_TX_DATA           0x0b8 0x3cc 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI1_SS3              0x0b8 0x3cc 0x80c 0x3 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI2_SS3              0x0b8 0x3cc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D25__GPIO3_IO25              0x0b8 0x3cc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D25__AUD5_RXC                0x0b8 0x3cc 0x7d4 0x6 0x0
+#define MX6QDL_PAD_EIM_D25__UART1_DSR_B             0x0b8 0x3cc 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D26__EIM_DATA26              0x0bc 0x3d0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_DI1_PIN11          0x0bc 0x3d0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_CSI0_DATA01        0x0bc 0x3d0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14        0x0bc 0x3d0 0x8c0 0x3 0x0
+#define MX6QDL_PAD_EIM_D26__UART2_TX_DATA           0x0bc 0x3d0 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D26__UART2_RX_DATA           0x0bc 0x3d0 0x928 0x4 0x0
+#define MX6QDL_PAD_EIM_D26__GPIO3_IO26              0x0bc 0x3d0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_SISG2              0x0bc 0x3d0 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22       0x0bc 0x3d0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D27__EIM_DATA27              0x0c0 0x3d4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_DI1_PIN13          0x0c0 0x3d4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_CSI0_DATA00        0x0c0 0x3d4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13        0x0c0 0x3d4 0x8bc 0x3 0x0
+#define MX6QDL_PAD_EIM_D27__UART2_RX_DATA           0x0c0 0x3d4 0x928 0x4 0x1
+#define MX6QDL_PAD_EIM_D27__UART2_TX_DATA           0x0c0 0x3d4 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D27__GPIO3_IO27              0x0c0 0x3d4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_SISG3              0x0c0 0x3d4 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23       0x0c0 0x3d4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D28__EIM_DATA28              0x0c4 0x3d8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D28__I2C1_SDA                0x0c4 0x3d8 0x89c 0x1 0x0
+#define MX6QDL_PAD_EIM_D28__ECSPI4_MOSI             0x0c4 0x3d8 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D28__IPU2_CSI1_DATA12        0x0c4 0x3d8 0x8b8 0x3 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_CTS_B             0x0c4 0x3d8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_RTS_B             0x0c4 0x3d8 0x924 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B         0x0c4 0x3d8 0x924 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_DTE_RTS_B         0x0c4 0x3d8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__GPIO3_IO28              0x0c4 0x3d8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_EXT_TRIG           0x0c4 0x3d8 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_DI0_PIN13          0x0c4 0x3d8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D29__EIM_DATA29              0x0c8 0x3dc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_DI1_PIN15          0x0c8 0x3dc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D29__ECSPI4_SS0              0x0c8 0x3dc 0x824 0x2 0x1
+#define MX6QDL_PAD_EIM_D29__UART2_RTS_B             0x0c8 0x3dc 0x924 0x4 0x1
+#define MX6QDL_PAD_EIM_D29__UART2_CTS_B             0x0c8 0x3dc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B         0x0c8 0x3dc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B         0x0c8 0x3dc 0x924 0x4 0x1
+#define MX6QDL_PAD_EIM_D29__GPIO3_IO29              0x0c8 0x3dc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC         0x0c8 0x3dc 0x8e4 0x6 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14          0x0c8 0x3dc 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D30__EIM_DATA30              0x0cc 0x3e0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21       0x0cc 0x3e0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_DI0_PIN11          0x0cc 0x3e0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_CSI0_DATA03        0x0cc 0x3e0 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D30__UART3_CTS_B             0x0cc 0x3e0 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D30__UART3_RTS_B             0x0cc 0x3e0 0x92c 0x4 0x2
+#define MX6QDL_PAD_EIM_D30__GPIO3_IO30              0x0cc 0x3e0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D30__USB_H1_OC               0x0cc 0x3e0 0x948 0x6 0x0
+#define MX6QDL_PAD_EIM_D31__EIM_DATA31              0x0d0 0x3e4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20       0x0d0 0x3e4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_DI0_PIN12          0x0d0 0x3e4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_CSI0_DATA02        0x0d0 0x3e4 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D31__UART3_RTS_B             0x0d0 0x3e4 0x92c 0x4 0x3
+#define MX6QDL_PAD_EIM_D31__UART3_CTS_B             0x0d0 0x3e4 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D31__GPIO3_IO31              0x0d0 0x3e4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D31__USB_H1_PWR              0x0d0 0x3e4 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_A24__EIM_ADDR24              0x0d4 0x3e8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19       0x0d4 0x3e8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A24__IPU2_CSI1_DATA19        0x0d4 0x3e8 0x8d4 0x2 0x1
+#define MX6QDL_PAD_EIM_A24__IPU2_SISG2              0x0d4 0x3e8 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_SISG2              0x0d4 0x3e8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A24__GPIO5_IO04              0x0d4 0x3e8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A24__SRC_BOOT_CFG24          0x0d4 0x3e8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A23__EIM_ADDR23              0x0d8 0x3ec 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18       0x0d8 0x3ec 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A23__IPU2_CSI1_DATA18        0x0d8 0x3ec 0x8d0 0x2 0x1
+#define MX6QDL_PAD_EIM_A23__IPU2_SISG3              0x0d8 0x3ec 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_SISG3              0x0d8 0x3ec 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A23__GPIO6_IO06              0x0d8 0x3ec 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A23__SRC_BOOT_CFG23          0x0d8 0x3ec 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A22__EIM_ADDR22              0x0dc 0x3f0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17       0x0dc 0x3f0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A22__IPU2_CSI1_DATA17        0x0dc 0x3f0 0x8cc 0x2 0x1
+#define MX6QDL_PAD_EIM_A22__GPIO2_IO16              0x0dc 0x3f0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A22__SRC_BOOT_CFG22          0x0dc 0x3f0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A21__EIM_ADDR21              0x0e0 0x3f4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16       0x0e0 0x3f4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A21__IPU2_CSI1_DATA16        0x0e0 0x3f4 0x8c8 0x2 0x1
+#define MX6QDL_PAD_EIM_A21__GPIO2_IO17              0x0e0 0x3f4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A21__SRC_BOOT_CFG21          0x0e0 0x3f4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A20__EIM_ADDR20              0x0e4 0x3f8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15       0x0e4 0x3f8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A20__IPU2_CSI1_DATA15        0x0e4 0x3f8 0x8c4 0x2 0x1
+#define MX6QDL_PAD_EIM_A20__GPIO2_IO18              0x0e4 0x3f8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A20__SRC_BOOT_CFG20          0x0e4 0x3f8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A19__EIM_ADDR19              0x0e8 0x3fc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14       0x0e8 0x3fc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A19__IPU2_CSI1_DATA14        0x0e8 0x3fc 0x8c0 0x2 0x1
+#define MX6QDL_PAD_EIM_A19__GPIO2_IO19              0x0e8 0x3fc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A19__SRC_BOOT_CFG19          0x0e8 0x3fc 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A18__EIM_ADDR18              0x0ec 0x400 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13       0x0ec 0x400 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A18__IPU2_CSI1_DATA13        0x0ec 0x400 0x8bc 0x2 0x1
+#define MX6QDL_PAD_EIM_A18__GPIO2_IO20              0x0ec 0x400 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A18__SRC_BOOT_CFG18          0x0ec 0x400 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A17__EIM_ADDR17              0x0f0 0x404 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12       0x0f0 0x404 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12        0x0f0 0x404 0x8b8 0x2 0x1
+#define MX6QDL_PAD_EIM_A17__GPIO2_IO21              0x0f0 0x404 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A17__SRC_BOOT_CFG17          0x0f0 0x404 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A16__EIM_ADDR16              0x0f4 0x408 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK       0x0f4 0x408 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK        0x0f4 0x408 0x8e0 0x2 0x1
+#define MX6QDL_PAD_EIM_A16__GPIO2_IO22              0x0f4 0x408 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A16__SRC_BOOT_CFG16          0x0f4 0x408 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_CS0__EIM_CS0_B               0x0f8 0x40c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_CS0__IPU1_DI1_PIN05          0x0f8 0x40c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK             0x0f8 0x40c 0x810 0x2 0x0
+#define MX6QDL_PAD_EIM_CS0__GPIO2_IO23              0x0f8 0x40c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_CS1__EIM_CS1_B               0x0fc 0x410 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_CS1__IPU1_DI1_PIN06          0x0fc 0x410 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI             0x0fc 0x410 0x818 0x2 0x0
+#define MX6QDL_PAD_EIM_CS1__GPIO2_IO24              0x0fc 0x410 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_OE__EIM_OE_B                 0x100 0x414 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_OE__IPU1_DI1_PIN07           0x100 0x414 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_OE__ECSPI2_MISO              0x100 0x414 0x814 0x2 0x0
+#define MX6QDL_PAD_EIM_OE__GPIO2_IO25               0x100 0x414 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_RW__EIM_RW                   0x104 0x418 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_RW__IPU1_DI1_PIN08           0x104 0x418 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_RW__ECSPI2_SS0               0x104 0x418 0x81c 0x2 0x0
+#define MX6QDL_PAD_EIM_RW__GPIO2_IO26               0x104 0x418 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_RW__SRC_BOOT_CFG29           0x104 0x418 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_LBA__EIM_LBA_B               0x108 0x41c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_LBA__IPU1_DI1_PIN17          0x108 0x41c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_LBA__ECSPI2_SS1              0x108 0x41c 0x820 0x2 0x0
+#define MX6QDL_PAD_EIM_LBA__GPIO2_IO27              0x108 0x41c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_LBA__SRC_BOOT_CFG26          0x108 0x41c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB0__EIM_EB0_B               0x10c 0x420 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11       0x10c 0x420 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB0__IPU2_CSI1_DATA11        0x10c 0x420 0x8b4 0x2 0x1
+#define MX6QDL_PAD_EIM_EB0__CCM_PMIC_READY          0x10c 0x420 0x7f0 0x4 0x0
+#define MX6QDL_PAD_EIM_EB0__GPIO2_IO28              0x10c 0x420 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB0__SRC_BOOT_CFG27          0x10c 0x420 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB1__EIM_EB1_B               0x110 0x424 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10       0x110 0x424 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB1__IPU2_CSI1_DATA10        0x110 0x424 0x8b0 0x2 0x1
+#define MX6QDL_PAD_EIM_EB1__GPIO2_IO29              0x110 0x424 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB1__SRC_BOOT_CFG28          0x110 0x424 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA0__EIM_AD00                0x114 0x428 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09       0x114 0x428 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA0__IPU2_CSI1_DATA09        0x114 0x428 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA0__GPIO3_IO00              0x114 0x428 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA0__SRC_BOOT_CFG00          0x114 0x428 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA1__EIM_AD01                0x118 0x42c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08       0x118 0x42c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA1__IPU2_CSI1_DATA08        0x118 0x42c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA1__GPIO3_IO01              0x118 0x42c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA1__SRC_BOOT_CFG01          0x118 0x42c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA2__EIM_AD02                0x11c 0x430 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07       0x11c 0x430 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA2__IPU2_CSI1_DATA07        0x11c 0x430 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA2__GPIO3_IO02              0x11c 0x430 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA2__SRC_BOOT_CFG02          0x11c 0x430 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA3__EIM_AD03                0x120 0x434 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06       0x120 0x434 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA3__IPU2_CSI1_DATA06        0x120 0x434 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA3__GPIO3_IO03              0x120 0x434 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA3__SRC_BOOT_CFG03          0x120 0x434 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA4__EIM_AD04                0x124 0x438 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05       0x124 0x438 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA4__IPU2_CSI1_DATA05        0x124 0x438 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA4__GPIO3_IO04              0x124 0x438 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA4__SRC_BOOT_CFG04          0x124 0x438 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA5__EIM_AD05                0x128 0x43c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04       0x128 0x43c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA5__IPU2_CSI1_DATA04        0x128 0x43c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA5__GPIO3_IO05              0x128 0x43c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA5__SRC_BOOT_CFG05          0x128 0x43c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA6__EIM_AD06                0x12c 0x440 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03       0x12c 0x440 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA6__IPU2_CSI1_DATA03        0x12c 0x440 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA6__GPIO3_IO06              0x12c 0x440 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA6__SRC_BOOT_CFG06          0x12c 0x440 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA7__EIM_AD07                0x130 0x444 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02       0x130 0x444 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA7__IPU2_CSI1_DATA02        0x130 0x444 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA7__GPIO3_IO07              0x130 0x444 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA7__SRC_BOOT_CFG07          0x130 0x444 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA8__EIM_AD08                0x134 0x448 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01       0x134 0x448 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA8__IPU2_CSI1_DATA01        0x134 0x448 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA8__GPIO3_IO08              0x134 0x448 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA8__SRC_BOOT_CFG08          0x134 0x448 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA9__EIM_AD09                0x138 0x44c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00       0x138 0x44c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA9__IPU2_CSI1_DATA00        0x138 0x44c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA9__GPIO3_IO09              0x138 0x44c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA9__SRC_BOOT_CFG09          0x138 0x44c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA10__EIM_AD10               0x13c 0x450 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15         0x13c 0x450 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA10__IPU2_CSI1_DATA_EN      0x13c 0x450 0x8d8 0x2 0x1
+#define MX6QDL_PAD_EIM_DA10__GPIO3_IO10             0x13c 0x450 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA10__SRC_BOOT_CFG10         0x13c 0x450 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA11__EIM_AD11               0x140 0x454 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02         0x140 0x454 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA11__IPU2_CSI1_HSYNC        0x140 0x454 0x8dc 0x2 0x1
+#define MX6QDL_PAD_EIM_DA11__GPIO3_IO11             0x140 0x454 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA11__SRC_BOOT_CFG11         0x140 0x454 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA12__EIM_AD12               0x144 0x458 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03         0x144 0x458 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA12__IPU2_CSI1_VSYNC        0x144 0x458 0x8e4 0x2 0x1
+#define MX6QDL_PAD_EIM_DA12__GPIO3_IO12             0x144 0x458 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA12__SRC_BOOT_CFG12         0x144 0x458 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA13__EIM_AD13               0x148 0x45c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA13__IPU1_DI1_D0_CS         0x148 0x45c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA13__GPIO3_IO13             0x148 0x45c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA13__SRC_BOOT_CFG13         0x148 0x45c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA14__EIM_AD14               0x14c 0x460 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA14__IPU1_DI1_D1_CS         0x14c 0x460 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA14__GPIO3_IO14             0x14c 0x460 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA14__SRC_BOOT_CFG14         0x14c 0x460 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA15__EIM_AD15               0x150 0x464 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN01         0x150 0x464 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN04         0x150 0x464 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA15__GPIO3_IO15             0x150 0x464 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA15__SRC_BOOT_CFG15         0x150 0x464 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B             0x154 0x468 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_WAIT__EIM_DTACK_B            0x154 0x468 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_WAIT__GPIO5_IO00             0x154 0x468 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_WAIT__SRC_BOOT_CFG25         0x154 0x468 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_BCLK__EIM_BCLK               0x158 0x46c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_BCLK__IPU1_DI1_PIN16         0x158 0x46c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_BCLK__GPIO6_IO31             0x158 0x46c 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK  0x15c 0x470 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK  0x15c 0x470 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16         0x15c 0x470 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15        0x160 0x474 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15        0x160 0x474 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN15__AUD6_TXC              0x160 0x474 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN15__GPIO4_IO17            0x160 0x474 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02         0x164 0x478 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02         0x164 0x478 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN2__AUD6_TXD               0x164 0x478 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN2__GPIO4_IO18             0x164 0x478 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03         0x168 0x47c 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03         0x168 0x47c 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN3__AUD6_TXFS              0x168 0x47c 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN3__GPIO4_IO19             0x168 0x47c 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04         0x16c 0x480 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN4__IPU2_DI0_PIN04         0x16c 0x480 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN4__AUD6_RXD               0x16c 0x480 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN4__SD1_WP                 0x16c 0x480 0x94c 0x3 0x0
+#define MX6QDL_PAD_DI0_PIN4__GPIO4_IO20             0x16c 0x480 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00    0x170 0x484 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00    0x170 0x484 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK          0x170 0x484 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21           0x170 0x484 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01    0x174 0x488 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01    0x174 0x488 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI          0x174 0x488 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22           0x174 0x488 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02    0x178 0x48c 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02    0x178 0x48c 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO          0x178 0x48c 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23           0x178 0x48c 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03    0x17c 0x490 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03    0x17c 0x490 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT3__ECSPI3_SS0           0x17c 0x490 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24           0x17c 0x490 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04    0x180 0x494 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04    0x180 0x494 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT4__ECSPI3_SS1           0x180 0x494 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25           0x180 0x494 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05    0x184 0x498 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05    0x184 0x498 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT5__ECSPI3_SS2           0x184 0x498 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT5__AUD6_RXFS            0x184 0x498 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26           0x184 0x498 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06    0x188 0x49c 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06    0x188 0x49c 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT6__ECSPI3_SS3           0x188 0x49c 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT6__AUD6_RXC             0x188 0x49c 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27           0x188 0x49c 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07    0x18c 0x4a0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07    0x18c 0x4a0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT7__ECSPI3_RDY           0x18c 0x4a0 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28           0x18c 0x4a0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08    0x190 0x4a4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08    0x190 0x4a4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT8__PWM1_OUT             0x190 0x4a4 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT8__WDOG1_B              0x190 0x4a4 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29           0x190 0x4a4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09    0x194 0x4a8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09    0x194 0x4a8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT9__PWM2_OUT             0x194 0x4a8 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT9__WDOG2_B              0x194 0x4a8 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30           0x194 0x4a8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10   0x198 0x4ac 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10   0x198 0x4ac 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31          0x198 0x4ac 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11   0x19c 0x4b0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11   0x19c 0x4b0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05          0x19c 0x4b0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12   0x1a0 0x4b4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12   0x1a0 0x4b4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06          0x1a0 0x4b4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13   0x1a4 0x4b8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13   0x1a4 0x4b8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS           0x1a4 0x4b8 0x7d8 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07          0x1a4 0x4b8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14   0x1a8 0x4bc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14   0x1a8 0x4bc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT14__AUD5_RXC            0x1a8 0x4bc 0x7d4 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08          0x1a8 0x4bc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15   0x1ac 0x4c0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15   0x1ac 0x4c0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT15__ECSPI1_SS1          0x1ac 0x4c0 0x804 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT15__ECSPI2_SS1          0x1ac 0x4c0 0x820 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09          0x1ac 0x4c0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16   0x1b0 0x4c4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT16__IPU2_DISP0_DATA16   0x1b0 0x4c4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI         0x1b0 0x4c4 0x818 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT16__AUD5_TXC            0x1b0 0x4c4 0x7dc 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0     0x1b0 0x4c4 0x90c 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10          0x1b0 0x4c4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17   0x1b4 0x4c8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT17__IPU2_DISP0_DATA17   0x1b4 0x4c8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO         0x1b4 0x4c8 0x814 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT17__AUD5_TXD            0x1b4 0x4c8 0x7d0 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1     0x1b4 0x4c8 0x910 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11          0x1b4 0x4c8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18   0x1b8 0x4cc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT18__IPU2_DISP0_DATA18   0x1b8 0x4cc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT18__ECSPI2_SS0          0x1b8 0x4cc 0x81c 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS           0x1b8 0x4cc 0x7e0 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT18__AUD4_RXFS           0x1b8 0x4cc 0x7c0 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12          0x1b8 0x4cc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT18__EIM_CS2_B           0x1b8 0x4cc 0x000 0x7 0x0
+#define MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19   0x1bc 0x4d0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT19__IPU2_DISP0_DATA19   0x1bc 0x4d0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK         0x1bc 0x4d0 0x810 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT19__AUD5_RXD            0x1bc 0x4d0 0x7cc 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT19__AUD4_RXC            0x1bc 0x4d0 0x7bc 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13          0x1bc 0x4d0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT19__EIM_CS3_B           0x1bc 0x4d0 0x000 0x7 0x0
+#define MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20   0x1c0 0x4d4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT20__IPU2_DISP0_DATA20   0x1c0 0x4d4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT20__ECSPI1_SCLK         0x1c0 0x4d4 0x7f4 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT20__AUD4_TXC            0x1c0 0x4d4 0x7c4 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14          0x1c0 0x4d4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21   0x1c4 0x4d8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT21__IPU2_DISP0_DATA21   0x1c4 0x4d8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT21__ECSPI1_MOSI         0x1c4 0x4d8 0x7fc 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT21__AUD4_TXD            0x1c4 0x4d8 0x7b8 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15          0x1c4 0x4d8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22   0x1c8 0x4dc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT22__IPU2_DISP0_DATA22   0x1c8 0x4dc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT22__ECSPI1_MISO         0x1c8 0x4dc 0x7f8 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS           0x1c8 0x4dc 0x7c8 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16          0x1c8 0x4dc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23   0x1cc 0x4e0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT23__IPU2_DISP0_DATA23   0x1cc 0x4e0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT23__ECSPI1_SS0          0x1cc 0x4e0 0x800 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT23__AUD4_RXD            0x1cc 0x4e0 0x7b4 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17          0x1cc 0x4e0 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDIO__ENET_MDIO             0x1d0 0x4e4 0x840 0x1 0x0
+#define MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK           0x1d0 0x4e4 0x86c 0x2 0x0
+#define MX6QDL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT  0x1d0 0x4e4 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_MDIO__GPIO1_IO22            0x1d0 0x4e4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDIO__SPDIF_LOCK            0x1d0 0x4e4 0x000 0x6 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK        0x1d4 0x4e8 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS         0x1d4 0x4e8 0x85c 0x2 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23         0x1d4 0x4e8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK       0x1d4 0x4e8 0x000 0x6 0x0
+#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID           0x1d8 0x4ec 0x004 0x0 0xff0d0100
+#define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER           0x1d8 0x4ec 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK       0x1d8 0x4ec 0x864 0x2 0x0
+#define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN             0x1d8 0x4ec 0x914 0x3 0x1
+#define MX6QDL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1d8 0x4ec 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24           0x1d8 0x4ec 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN          0x1dc 0x4f0 0x858 0x1 0x1
+#define MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK         0x1dc 0x4f0 0x870 0x2 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK       0x1dc 0x4f0 0x918 0x3 0x1
+#define MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25          0x1dc 0x4f0 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD1__MLB_SIG               0x1e0 0x4f4 0x908 0x0 0x0
+#define MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1         0x1e0 0x4f4 0x84c 0x1 0x1
+#define MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS            0x1e0 0x4f4 0x860 0x2 0x0
+#define MX6QDL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT  0x1e0 0x4f4 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_RXD1__GPIO1_IO26            0x1e0 0x4f4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0         0x1e4 0x4f8 0x848 0x1 0x1
+#define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK        0x1e4 0x4f8 0x868 0x2 0x0
+#define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT             0x1e4 0x4f8 0x000 0x3 0x0
+#define MX6QDL_PAD_ENET_RXD0__GPIO1_IO27            0x1e4 0x4f8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN           0x1e8 0x4fc 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2         0x1e8 0x4fc 0x880 0x2 0x0
+#define MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28           0x1e8 0x4fc 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TXD1__MLB_CLK               0x1ec 0x500 0x900 0x0 0x0
+#define MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1         0x1ec 0x500 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3          0x1ec 0x500 0x87c 0x2 0x0
+#define MX6QDL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN   0x1ec 0x500 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_TXD1__GPIO1_IO29            0x1ec 0x500 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0         0x1f0 0x504 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1          0x1f0 0x504 0x884 0x2 0x0
+#define MX6QDL_PAD_ENET_TXD0__GPIO1_IO30            0x1f0 0x504 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDC__MLB_DATA               0x1f4 0x508 0x904 0x0 0x0
+#define MX6QDL_PAD_ENET_MDC__ENET_MDC               0x1f4 0x508 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0           0x1f4 0x508 0x888 0x2 0x0
+#define MX6QDL_PAD_ENET_MDC__ENET_1588_EVENT1_IN    0x1f4 0x508 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_MDC__GPIO1_IO31             0x1f4 0x508 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK            0x1f8 0x5c8 0x7f4 0x0 0x2
+#define MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3          0x1f8 0x5c8 0x854 0x1 0x1
+#define MX6QDL_PAD_KEY_COL0__AUD5_TXC               0x1f8 0x5c8 0x7dc 0x2 0x1
+#define MX6QDL_PAD_KEY_COL0__KEY_COL0               0x1f8 0x5c8 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL0__UART4_TX_DATA          0x1f8 0x5c8 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL0__UART4_RX_DATA          0x1f8 0x5c8 0x938 0x4 0x0
+#define MX6QDL_PAD_KEY_COL0__GPIO4_IO06             0x1f8 0x5c8 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL0__DCIC1_OUT              0x1f8 0x5c8 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI            0x1fc 0x5cc 0x7fc 0x0 0x2
+#define MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3          0x1fc 0x5cc 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW0__AUD5_TXD               0x1fc 0x5cc 0x7d0 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW0__KEY_ROW0               0x1fc 0x5cc 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA          0x1fc 0x5cc 0x938 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA          0x1fc 0x5cc 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW0__GPIO4_IO07             0x1fc 0x5cc 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW0__DCIC2_OUT              0x1fc 0x5cc 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL1__ECSPI1_MISO            0x200 0x5d0 0x7f8 0x0 0x2
+#define MX6QDL_PAD_KEY_COL1__ENET_MDIO              0x200 0x5d0 0x840 0x1 0x1
+#define MX6QDL_PAD_KEY_COL1__AUD5_TXFS              0x200 0x5d0 0x7e0 0x2 0x1
+#define MX6QDL_PAD_KEY_COL1__KEY_COL1               0x200 0x5d0 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL1__UART5_TX_DATA          0x200 0x5d0 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL1__UART5_RX_DATA          0x200 0x5d0 0x940 0x4 0x0
+#define MX6QDL_PAD_KEY_COL1__GPIO4_IO08             0x200 0x5d0 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL1__SD1_VSELECT            0x200 0x5d0 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0             0x204 0x5d4 0x800 0x0 0x2
+#define MX6QDL_PAD_KEY_ROW1__ENET_COL               0x204 0x5d4 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW1__AUD5_RXD               0x204 0x5d4 0x7cc 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW1__KEY_ROW1               0x204 0x5d4 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA          0x204 0x5d4 0x940 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA          0x204 0x5d4 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW1__GPIO4_IO09             0x204 0x5d4 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW1__SD2_VSELECT            0x204 0x5d4 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL2__ECSPI1_SS1             0x208 0x5d8 0x804 0x0 0x2
+#define MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2          0x208 0x5d8 0x850 0x1 0x1
+#define MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX            0x208 0x5d8 0x000 0x2 0x0
+#define MX6QDL_PAD_KEY_COL2__KEY_COL2               0x208 0x5d8 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL2__ENET_MDC               0x208 0x5d8 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL2__GPIO4_IO10             0x208 0x5d8 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE    0x208 0x5d8 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW2__ECSPI1_SS2             0x20c 0x5dc 0x808 0x0 0x1
+#define MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2          0x20c 0x5dc 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX            0x20c 0x5dc 0x7e4 0x2 0x0
+#define MX6QDL_PAD_KEY_ROW2__KEY_ROW2               0x20c 0x5dc 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW2__SD2_VSELECT            0x20c 0x5dc 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW2__GPIO4_IO11             0x20c 0x5dc 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE       0x20c 0x5dc 0x88c 0x6 0x1
+#define MX6QDL_PAD_KEY_COL3__ECSPI1_SS3             0x210 0x5e0 0x80c 0x0 0x1
+#define MX6QDL_PAD_KEY_COL3__ENET_CRS               0x210 0x5e0 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL        0x210 0x5e0 0x890 0x2 0x1
+#define MX6QDL_PAD_KEY_COL3__KEY_COL3               0x210 0x5e0 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL3__I2C2_SCL               0x210 0x5e0 0x8a0 0x4 0x1
+#define MX6QDL_PAD_KEY_COL3__GPIO4_IO12             0x210 0x5e0 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL3__SPDIF_IN               0x210 0x5e0 0x914 0x6 0x2
+#define MX6QDL_PAD_KEY_ROW3__ASRC_EXT_CLK           0x214 0x5e4 0x7b0 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA        0x214 0x5e4 0x894 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW3__KEY_ROW3               0x214 0x5e4 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW3__I2C2_SDA               0x214 0x5e4 0x8a4 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW3__GPIO4_IO13             0x214 0x5e4 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW3__SD1_VSELECT            0x214 0x5e4 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX            0x218 0x5e8 0x000 0x0 0x0
+#define MX6QDL_PAD_KEY_COL4__IPU1_SISG4             0x218 0x5e8 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_COL4__USB_OTG_OC             0x218 0x5e8 0x944 0x2 0x1
+#define MX6QDL_PAD_KEY_COL4__KEY_COL4               0x218 0x5e8 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL4__UART5_RTS_B            0x218 0x5e8 0x93c 0x4 0x0
+#define MX6QDL_PAD_KEY_COL4__UART5_CTS_B            0x218 0x5e8 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL4__GPIO4_IO14             0x218 0x5e8 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX            0x21c 0x5ec 0x7e8 0x0 0x0
+#define MX6QDL_PAD_KEY_ROW4__IPU1_SISG5             0x21c 0x5ec 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR            0x21c 0x5ec 0x000 0x2 0x0
+#define MX6QDL_PAD_KEY_ROW4__KEY_ROW4               0x21c 0x5ec 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW4__UART5_CTS_B            0x21c 0x5ec 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW4__UART5_RTS_B            0x21c 0x5ec 0x93c 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW4__GPIO4_IO15             0x21c 0x5ec 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_0__CCM_CLKO1                0x220 0x5f0 0x000 0x0 0x0
+#define MX6QDL_PAD_GPIO_0__KEY_COL5                 0x220 0x5f0 0x8e8 0x2 0x0
+#define MX6QDL_PAD_GPIO_0__ASRC_EXT_CLK             0x220 0x5f0 0x7b0 0x3 0x1
+#define MX6QDL_PAD_GPIO_0__EPIT1_OUT                0x220 0x5f0 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_0__GPIO1_IO00               0x220 0x5f0 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_0__USB_H1_PWR               0x220 0x5f0 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_0__SNVS_VIO_5               0x220 0x5f0 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK              0x224 0x5f4 0x86c 0x0 0x1
+#define MX6QDL_PAD_GPIO_1__WDOG2_B                  0x224 0x5f4 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_1__KEY_ROW5                 0x224 0x5f4 0x8f4 0x2 0x0
+#define MX6QDL_PAD_GPIO_1__USB_OTG_ID               0x224 0x5f4 0x004 0x3 0xff0d0101
+#define MX6QDL_PAD_GPIO_1__PWM2_OUT                 0x224 0x5f4 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_1__GPIO1_IO01               0x224 0x5f4 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_1__SD1_CD_B                 0x224 0x5f4 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_9__ESAI_RX_FS               0x228 0x5f8 0x85c 0x0 0x1
+#define MX6QDL_PAD_GPIO_9__WDOG1_B                  0x228 0x5f8 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_9__KEY_COL6                 0x228 0x5f8 0x8ec 0x2 0x0
+#define MX6QDL_PAD_GPIO_9__CCM_REF_EN_B             0x228 0x5f8 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_9__PWM1_OUT                 0x228 0x5f8 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_9__GPIO1_IO09               0x228 0x5f8 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_9__SD1_WP                   0x228 0x5f8 0x94c 0x6 0x1
+#define MX6QDL_PAD_GPIO_3__ESAI_RX_HF_CLK           0x22c 0x5fc 0x864 0x0 0x1
+#define MX6QDL_PAD_GPIO_3__I2C3_SCL                 0x22c 0x5fc 0x8a8 0x2 0x1
+#define MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M      0x22c 0x5fc 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_3__CCM_CLKO2                0x22c 0x5fc 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_3__GPIO1_IO03               0x22c 0x5fc 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_3__USB_H1_OC                0x22c 0x5fc 0x948 0x6 0x1
+#define MX6QDL_PAD_GPIO_3__MLB_CLK                  0x22c 0x5fc 0x900 0x7 0x1
+#define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK              0x230 0x600 0x870 0x0 0x1
+#define MX6QDL_PAD_GPIO_6__I2C3_SDA                 0x230 0x600 0x8ac 0x2 0x1
+#define MX6QDL_PAD_GPIO_6__GPIO1_IO06               0x230 0x600 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_6__SD2_LCTL                 0x230 0x600 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_6__MLB_SIG                  0x230 0x600 0x908 0x7 0x1
+#define MX6QDL_PAD_GPIO_2__ESAI_TX_FS               0x234 0x604 0x860 0x0 0x1
+#define MX6QDL_PAD_GPIO_2__KEY_ROW6                 0x234 0x604 0x8f8 0x2 0x1
+#define MX6QDL_PAD_GPIO_2__GPIO1_IO02               0x234 0x604 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_2__SD2_WP                   0x234 0x604 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_2__MLB_DATA                 0x234 0x604 0x904 0x7 0x1
+#define MX6QDL_PAD_GPIO_4__ESAI_TX_HF_CLK           0x238 0x608 0x868 0x0 0x1
+#define MX6QDL_PAD_GPIO_4__KEY_COL7                 0x238 0x608 0x8f0 0x2 0x1
+#define MX6QDL_PAD_GPIO_4__GPIO1_IO04               0x238 0x608 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_4__SD2_CD_B                 0x238 0x608 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3             0x23c 0x60c 0x87c 0x0 0x1
+#define MX6QDL_PAD_GPIO_5__KEY_ROW7                 0x23c 0x60c 0x8fc 0x2 0x1
+#define MX6QDL_PAD_GPIO_5__CCM_CLKO1                0x23c 0x60c 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_5__GPIO1_IO05               0x23c 0x60c 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_5__I2C3_SCL                 0x23c 0x60c 0x8a8 0x6 0x2
+#define MX6QDL_PAD_GPIO_5__ARM_EVENTI               0x23c 0x60c 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_7__ESAI_TX4_RX1             0x240 0x610 0x884 0x0 0x1
+#define MX6QDL_PAD_GPIO_7__ECSPI5_RDY               0x240 0x610 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_7__EPIT1_OUT                0x240 0x610 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_7__FLEXCAN1_TX              0x240 0x610 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_7__UART2_TX_DATA            0x240 0x610 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_7__UART2_RX_DATA            0x240 0x610 0x928 0x4 0x2
+#define MX6QDL_PAD_GPIO_7__GPIO1_IO07               0x240 0x610 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_7__SPDIF_LOCK               0x240 0x610 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_7__USB_OTG_HOST_MODE        0x240 0x610 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_8__ESAI_TX5_RX0             0x244 0x614 0x888 0x0 0x1
+#define MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K      0x244 0x614 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_8__EPIT2_OUT                0x244 0x614 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_8__FLEXCAN1_RX              0x244 0x614 0x7e4 0x3 0x1
+#define MX6QDL_PAD_GPIO_8__UART2_RX_DATA            0x244 0x614 0x928 0x4 0x3
+#define MX6QDL_PAD_GPIO_8__UART2_TX_DATA            0x244 0x614 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_8__GPIO1_IO08               0x244 0x614 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_8__SPDIF_SR_CLK             0x244 0x614 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE     0x244 0x614 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_16__ESAI_TX3_RX2            0x248 0x618 0x880 0x0 0x1
+#define MX6QDL_PAD_GPIO_16__ENET_1588_EVENT2_IN     0x248 0x618 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_16__ENET_REF_CLK            0x248 0x618 0x83c 0x2 0x1
+#define MX6QDL_PAD_GPIO_16__SD1_LCTL                0x248 0x618 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_16__SPDIF_IN                0x248 0x618 0x914 0x4 0x3
+#define MX6QDL_PAD_GPIO_16__GPIO7_IO11              0x248 0x618 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_16__I2C3_SDA                0x248 0x618 0x8ac 0x6 0x2
+#define MX6QDL_PAD_GPIO_16__JTAG_DE_B               0x248 0x618 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_17__ESAI_TX0                0x24c 0x61c 0x874 0x0 0x0
+#define MX6QDL_PAD_GPIO_17__ENET_1588_EVENT3_IN     0x24c 0x61c 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_17__CCM_PMIC_READY          0x24c 0x61c 0x7f0 0x2 0x1
+#define MX6QDL_PAD_GPIO_17__SDMA_EXT_EVENT0         0x24c 0x61c 0x90c 0x3 0x1
+#define MX6QDL_PAD_GPIO_17__SPDIF_OUT               0x24c 0x61c 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_17__GPIO7_IO12              0x24c 0x61c 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_18__ESAI_TX1                0x250 0x620 0x878 0x0 0x0
+#define MX6QDL_PAD_GPIO_18__ENET_RX_CLK             0x250 0x620 0x844 0x1 0x1
+#define MX6QDL_PAD_GPIO_18__SD3_VSELECT             0x250 0x620 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_18__SDMA_EXT_EVENT1         0x250 0x620 0x910 0x3 0x1
+#define MX6QDL_PAD_GPIO_18__ASRC_EXT_CLK            0x250 0x620 0x7b0 0x4 0x2
+#define MX6QDL_PAD_GPIO_18__GPIO7_IO13              0x250 0x620 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_18__SNVS_VIO_5_CTL          0x250 0x620 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_19__KEY_COL5                0x254 0x624 0x8e8 0x0 0x1
+#define MX6QDL_PAD_GPIO_19__ENET_1588_EVENT0_OUT    0x254 0x624 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_19__SPDIF_OUT               0x254 0x624 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_19__CCM_CLKO1               0x254 0x624 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_19__ECSPI1_RDY              0x254 0x624 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_19__GPIO4_IO05              0x254 0x624 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_19__ENET_TX_ER              0x254 0x624 0x000 0x6 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK    0x258 0x628 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18          0x258 0x628 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO          0x258 0x628 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC       0x25c 0x62c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1             0x25c 0x62c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19            0x25c 0x62c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL         0x25c 0x62c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN  0x260 0x630 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00         0x260 0x630 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20         0x260 0x630 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK      0x260 0x630 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC      0x264 0x634 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01           0x264 0x634 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21           0x264 0x634 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00          0x264 0x634 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04      0x268 0x638 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT4__EIM_DATA02            0x268 0x638 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK           0x268 0x638 0x7f4 0x2 0x3
+#define MX6QDL_PAD_CSI0_DAT4__KEY_COL5              0x268 0x638 0x8e8 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT4__AUD3_TXC              0x268 0x638 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22            0x268 0x638 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01           0x268 0x638 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05      0x26c 0x63c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT5__EIM_DATA03            0x26c 0x63c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI           0x26c 0x63c 0x7fc 0x2 0x3
+#define MX6QDL_PAD_CSI0_DAT5__KEY_ROW5              0x26c 0x63c 0x8f4 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT5__AUD3_TXD              0x26c 0x63c 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23            0x26c 0x63c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02           0x26c 0x63c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06      0x270 0x640 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT6__EIM_DATA04            0x270 0x640 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO           0x270 0x640 0x7f8 0x2 0x3
+#define MX6QDL_PAD_CSI0_DAT6__KEY_COL6              0x270 0x640 0x8ec 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS             0x270 0x640 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24            0x270 0x640 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03           0x270 0x640 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07      0x274 0x644 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT7__EIM_DATA05            0x274 0x644 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT7__ECSPI1_SS0            0x274 0x644 0x800 0x2 0x3
+#define MX6QDL_PAD_CSI0_DAT7__KEY_ROW6              0x274 0x644 0x8f8 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT7__AUD3_RXD              0x274 0x644 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25            0x274 0x644 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04           0x274 0x644 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08      0x278 0x648 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT8__EIM_DATA06            0x278 0x648 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK           0x278 0x648 0x810 0x2 0x2
+#define MX6QDL_PAD_CSI0_DAT8__KEY_COL7              0x278 0x648 0x8f0 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT8__I2C1_SDA              0x278 0x648 0x89c 0x4 0x1
+#define MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26            0x278 0x648 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05           0x278 0x648 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09      0x27c 0x64c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT9__EIM_DATA07            0x27c 0x64c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI           0x27c 0x64c 0x818 0x2 0x2
+#define MX6QDL_PAD_CSI0_DAT9__KEY_ROW7              0x27c 0x64c 0x8fc 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT9__I2C1_SCL              0x27c 0x64c 0x898 0x4 0x1
+#define MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27            0x27c 0x64c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06           0x27c 0x64c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10     0x280 0x650 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT10__AUD3_RXC             0x280 0x650 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO          0x280 0x650 0x814 0x2 0x2
+#define MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA        0x280 0x650 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA        0x280 0x650 0x920 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28           0x280 0x650 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07          0x280 0x650 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11     0x284 0x654 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT11__AUD3_RXFS            0x284 0x654 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT11__ECSPI2_SS0           0x284 0x654 0x81c 0x2 0x2
+#define MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA        0x284 0x654 0x920 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA        0x284 0x654 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29           0x284 0x654 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08          0x284 0x654 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12     0x288 0x658 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT12__EIM_DATA08           0x288 0x658 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA        0x288 0x658 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT12__UART4_RX_DATA        0x288 0x658 0x938 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30           0x288 0x658 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09          0x288 0x658 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13     0x28c 0x65c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT13__EIM_DATA09           0x28c 0x65c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA        0x28c 0x65c 0x938 0x3 0x3
+#define MX6QDL_PAD_CSI0_DAT13__UART4_TX_DATA        0x28c 0x65c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31           0x28c 0x65c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10          0x28c 0x65c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14     0x290 0x660 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT14__EIM_DATA10           0x290 0x660 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA        0x290 0x660 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT14__UART5_RX_DATA        0x290 0x660 0x940 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00           0x290 0x660 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11          0x290 0x660 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15     0x294 0x664 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT15__EIM_DATA11           0x294 0x664 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA        0x294 0x664 0x940 0x3 0x3
+#define MX6QDL_PAD_CSI0_DAT15__UART5_TX_DATA        0x294 0x664 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01           0x294 0x664 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12          0x294 0x664 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16     0x298 0x668 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT16__EIM_DATA12           0x298 0x668 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B          0x298 0x668 0x934 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT16__UART4_CTS_B          0x298 0x668 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02           0x298 0x668 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13          0x298 0x668 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17     0x29c 0x66c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT17__EIM_DATA13           0x29c 0x66c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B          0x29c 0x66c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT17__UART4_RTS_B          0x29c 0x66c 0x934 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03           0x29c 0x66c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14          0x29c 0x66c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18     0x2a0 0x670 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT18__EIM_DATA14           0x2a0 0x670 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B          0x2a0 0x670 0x93c 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT18__UART5_CTS_B          0x2a0 0x670 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04           0x2a0 0x670 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15          0x2a0 0x670 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19     0x2a4 0x674 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT19__EIM_DATA15           0x2a4 0x674 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B          0x2a4 0x674 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT19__UART5_RTS_B          0x2a4 0x674 0x93c 0x3 0x3
+#define MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05           0x2a4 0x674 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT7__SD3_DATA7              0x2a8 0x690 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA          0x2a8 0x690 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT7__UART1_RX_DATA          0x2a8 0x690 0x920 0x1 0x2
+#define MX6QDL_PAD_SD3_DAT7__GPIO6_IO17             0x2a8 0x690 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT6__SD3_DATA6              0x2ac 0x694 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA          0x2ac 0x694 0x920 0x1 0x3
+#define MX6QDL_PAD_SD3_DAT6__UART1_TX_DATA          0x2ac 0x694 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT6__GPIO6_IO18             0x2ac 0x694 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT5__SD3_DATA5              0x2b0 0x698 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA          0x2b0 0x698 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT5__UART2_RX_DATA          0x2b0 0x698 0x928 0x1 0x4
+#define MX6QDL_PAD_SD3_DAT5__GPIO7_IO00             0x2b0 0x698 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT4__SD3_DATA4              0x2b4 0x69c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA          0x2b4 0x69c 0x928 0x1 0x5
+#define MX6QDL_PAD_SD3_DAT4__UART2_TX_DATA          0x2b4 0x69c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT4__GPIO7_IO01             0x2b4 0x69c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_CMD__SD3_CMD                 0x2b8 0x6a0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_CMD__UART2_CTS_B             0x2b8 0x6a0 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_CMD__UART2_RTS_B             0x2b8 0x6a0 0x924 0x1 0x2
+#define MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX             0x2b8 0x6a0 0x000 0x2 0x0
+#define MX6QDL_PAD_SD3_CMD__GPIO7_IO02              0x2b8 0x6a0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_CLK__SD3_CLK                 0x2bc 0x6a4 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_CLK__UART2_RTS_B             0x2bc 0x6a4 0x924 0x1 0x3
+#define MX6QDL_PAD_SD3_CLK__UART2_CTS_B             0x2bc 0x6a4 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX             0x2bc 0x6a4 0x7e4 0x2 0x2
+#define MX6QDL_PAD_SD3_CLK__GPIO7_IO03              0x2bc 0x6a4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT0__SD3_DATA0              0x2c0 0x6a8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT0__UART1_CTS_B            0x2c0 0x6a8 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT0__UART1_RTS_B            0x2c0 0x6a8 0x91c 0x1 0x2
+#define MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX            0x2c0 0x6a8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD3_DAT0__GPIO7_IO04             0x2c0 0x6a8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT1__SD3_DATA1              0x2c4 0x6ac 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT1__UART1_RTS_B            0x2c4 0x6ac 0x91c 0x1 0x3
+#define MX6QDL_PAD_SD3_DAT1__UART1_CTS_B            0x2c4 0x6ac 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX            0x2c4 0x6ac 0x7e8 0x2 0x1
+#define MX6QDL_PAD_SD3_DAT1__GPIO7_IO05             0x2c4 0x6ac 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT2__SD3_DATA2              0x2c8 0x6b0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT2__GPIO7_IO06             0x2c8 0x6b0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT3__SD3_DATA3              0x2cc 0x6b4 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT3__UART3_CTS_B            0x2cc 0x6b4 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT3__UART3_RTS_B            0x2cc 0x6b4 0x92c 0x1 0x4
+#define MX6QDL_PAD_SD3_DAT3__GPIO7_IO07             0x2cc 0x6b4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_RST__SD3_RESET               0x2d0 0x6b8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_RST__UART3_RTS_B             0x2d0 0x6b8 0x92c 0x1 0x5
+#define MX6QDL_PAD_SD3_RST__UART3_CTS_B             0x2d0 0x6b8 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_RST__GPIO7_IO08              0x2d0 0x6b8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CLE__NAND_CLE              0x2d4 0x6bc 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CLE__IPU2_SISG4            0x2d4 0x6bc 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CLE__GPIO6_IO07            0x2d4 0x6bc 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_ALE__NAND_ALE              0x2d8 0x6c0 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_ALE__SD4_RESET             0x2d8 0x6c0 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_ALE__GPIO6_IO08            0x2d8 0x6c0 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_WP_B__NAND_WP_B            0x2dc 0x6c4 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_WP_B__IPU2_SISG5           0x2dc 0x6c4 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09           0x2dc 0x6c4 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_RB0__NAND_READY_B          0x2e0 0x6c8 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_RB0__IPU2_DI0_PIN01        0x2e0 0x6c8 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_RB0__GPIO6_IO10            0x2e0 0x6c8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS0__NAND_CE0_B            0x2e4 0x6cc 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS0__GPIO6_IO11            0x2e4 0x6cc 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS1__NAND_CE1_B            0x2e8 0x6d0 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS1__SD4_VSELECT           0x2e8 0x6d0 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS1__SD3_VSELECT           0x2e8 0x6d0 0x000 0x2 0x0
+#define MX6QDL_PAD_NANDF_CS1__GPIO6_IO14            0x2e8 0x6d0 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS2__NAND_CE2_B            0x2ec 0x6d4 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS2__IPU1_SISG0            0x2ec 0x6d4 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS2__ESAI_TX0              0x2ec 0x6d4 0x874 0x2 0x1
+#define MX6QDL_PAD_NANDF_CS2__EIM_CRE               0x2ec 0x6d4 0x000 0x3 0x0
+#define MX6QDL_PAD_NANDF_CS2__CCM_CLKO2             0x2ec 0x6d4 0x000 0x4 0x0
+#define MX6QDL_PAD_NANDF_CS2__GPIO6_IO15            0x2ec 0x6d4 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS2__IPU2_SISG0            0x2ec 0x6d4 0x000 0x6 0x0
+#define MX6QDL_PAD_NANDF_CS3__NAND_CE3_B            0x2f0 0x6d8 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS3__IPU1_SISG1            0x2f0 0x6d8 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS3__ESAI_TX1              0x2f0 0x6d8 0x878 0x2 0x1
+#define MX6QDL_PAD_NANDF_CS3__EIM_ADDR26            0x2f0 0x6d8 0x000 0x3 0x0
+#define MX6QDL_PAD_NANDF_CS3__GPIO6_IO16            0x2f0 0x6d8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS3__IPU2_SISG1            0x2f0 0x6d8 0x000 0x6 0x0
+#define MX6QDL_PAD_SD4_CMD__SD4_CMD                 0x2f4 0x6dc 0x000 0x0 0x0
+#define MX6QDL_PAD_SD4_CMD__NAND_RE_B               0x2f4 0x6dc 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_CMD__UART3_TX_DATA           0x2f4 0x6dc 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_CMD__UART3_RX_DATA           0x2f4 0x6dc 0x930 0x2 0x2
+#define MX6QDL_PAD_SD4_CMD__GPIO7_IO09              0x2f4 0x6dc 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_CLK__SD4_CLK                 0x2f8 0x6e0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD4_CLK__NAND_WE_B               0x2f8 0x6e0 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_CLK__UART3_RX_DATA           0x2f8 0x6e0 0x930 0x2 0x3
+#define MX6QDL_PAD_SD4_CLK__UART3_TX_DATA           0x2f8 0x6e0 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_CLK__GPIO7_IO10              0x2f8 0x6e0 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D0__NAND_DATA00            0x2fc 0x6e4 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D0__SD1_DATA4              0x2fc 0x6e4 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D0__GPIO2_IO00             0x2fc 0x6e4 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D1__NAND_DATA01            0x300 0x6e8 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D1__SD1_DATA5              0x300 0x6e8 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D1__GPIO2_IO01             0x300 0x6e8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D2__NAND_DATA02            0x304 0x6ec 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D2__SD1_DATA6              0x304 0x6ec 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D2__GPIO2_IO02             0x304 0x6ec 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D3__NAND_DATA03            0x308 0x6f0 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D3__SD1_DATA7              0x308 0x6f0 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D3__GPIO2_IO03             0x308 0x6f0 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D4__NAND_DATA04            0x30c 0x6f4 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D4__SD2_DATA4              0x30c 0x6f4 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D4__GPIO2_IO04             0x30c 0x6f4 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D5__NAND_DATA05            0x310 0x6f8 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D5__SD2_DATA5              0x310 0x6f8 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D5__GPIO2_IO05             0x310 0x6f8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D6__NAND_DATA06            0x314 0x6fc 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D6__SD2_DATA6              0x314 0x6fc 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D6__GPIO2_IO06             0x314 0x6fc 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D7__NAND_DATA07            0x318 0x700 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D7__SD2_DATA7              0x318 0x700 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D7__GPIO2_IO07             0x318 0x700 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT0__SD4_DATA0              0x31c 0x704 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT0__NAND_DQS               0x31c 0x704 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT0__GPIO2_IO08             0x31c 0x704 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT1__SD4_DATA1              0x320 0x708 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT1__PWM3_OUT               0x320 0x708 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT1__GPIO2_IO09             0x320 0x708 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT2__SD4_DATA2              0x324 0x70c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT2__PWM4_OUT               0x324 0x70c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT2__GPIO2_IO10             0x324 0x70c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT3__SD4_DATA3              0x328 0x710 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT3__GPIO2_IO11             0x328 0x710 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT4__SD4_DATA4              0x32c 0x714 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA          0x32c 0x714 0x928 0x2 0x6
+#define MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA          0x32c 0x714 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT4__GPIO2_IO12             0x32c 0x714 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT5__SD4_DATA5              0x330 0x718 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT5__UART2_RTS_B            0x330 0x718 0x924 0x2 0x4
+#define MX6QDL_PAD_SD4_DAT5__UART2_CTS_B            0x330 0x718 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT5__GPIO2_IO13             0x330 0x718 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT6__SD4_DATA6              0x334 0x71c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT6__UART2_CTS_B            0x334 0x71c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT6__UART2_RTS_B            0x334 0x71c 0x924 0x2 0x5
+#define MX6QDL_PAD_SD4_DAT6__GPIO2_IO14             0x334 0x71c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT7__SD4_DATA7              0x338 0x720 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA          0x338 0x720 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA          0x338 0x720 0x928 0x2 0x7
+#define MX6QDL_PAD_SD4_DAT7__GPIO2_IO15             0x338 0x720 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT1__SD1_DATA1              0x33c 0x724 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT1__ECSPI5_SS0             0x33c 0x724 0x834 0x1 0x1
+#define MX6QDL_PAD_SD1_DAT1__PWM3_OUT               0x33c 0x724 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2           0x33c 0x724 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT1__GPIO1_IO17             0x33c 0x724 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT0__SD1_DATA0              0x340 0x728 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO            0x340 0x728 0x82c 0x1 0x1
+#define MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1           0x340 0x728 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT0__GPIO1_IO16             0x340 0x728 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT3__SD1_DATA3              0x344 0x72c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT3__ECSPI5_SS2             0x344 0x72c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD1_DAT3__GPT_COMPARE3           0x344 0x72c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT3__PWM1_OUT               0x344 0x72c 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT3__WDOG2_B                0x344 0x72c 0x000 0x4 0x0
+#define MX6QDL_PAD_SD1_DAT3__GPIO1_IO21             0x344 0x72c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB      0x344 0x72c 0x000 0x6 0x0
+#define MX6QDL_PAD_SD1_CMD__SD1_CMD                 0x348 0x730 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI             0x348 0x730 0x830 0x1 0x0
+#define MX6QDL_PAD_SD1_CMD__PWM4_OUT                0x348 0x730 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_CMD__GPT_COMPARE1            0x348 0x730 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_CMD__GPIO1_IO18              0x348 0x730 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT2__SD1_DATA2              0x34c 0x734 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT2__ECSPI5_SS1             0x34c 0x734 0x838 0x1 0x1
+#define MX6QDL_PAD_SD1_DAT2__GPT_COMPARE2           0x34c 0x734 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT2__PWM2_OUT               0x34c 0x734 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT2__WDOG1_B                0x34c 0x734 0x000 0x4 0x0
+#define MX6QDL_PAD_SD1_DAT2__GPIO1_IO19             0x34c 0x734 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB      0x34c 0x734 0x000 0x6 0x0
+#define MX6QDL_PAD_SD1_CLK__SD1_CLK                 0x350 0x738 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK             0x350 0x738 0x828 0x1 0x0
+#define MX6QDL_PAD_SD1_CLK__GPT_CLKIN               0x350 0x738 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_CLK__GPIO1_IO20              0x350 0x738 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_CLK__SD2_CLK                 0x354 0x73c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_CLK__ECSPI5_SCLK             0x354 0x73c 0x828 0x1 0x1
+#define MX6QDL_PAD_SD2_CLK__KEY_COL5                0x354 0x73c 0x8e8 0x2 0x3
+#define MX6QDL_PAD_SD2_CLK__AUD4_RXFS               0x354 0x73c 0x7c0 0x3 0x1
+#define MX6QDL_PAD_SD2_CLK__GPIO1_IO10              0x354 0x73c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_CMD__SD2_CMD                 0x358 0x740 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_CMD__ECSPI5_MOSI             0x358 0x740 0x830 0x1 0x1
+#define MX6QDL_PAD_SD2_CMD__KEY_ROW5                0x358 0x740 0x8f4 0x2 0x2
+#define MX6QDL_PAD_SD2_CMD__AUD4_RXC                0x358 0x740 0x7bc 0x3 0x1
+#define MX6QDL_PAD_SD2_CMD__GPIO1_IO11              0x358 0x740 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT3__SD2_DATA3              0x35c 0x744 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT3__ECSPI5_SS3             0x35c 0x744 0x000 0x1 0x0
+#define MX6QDL_PAD_SD2_DAT3__KEY_COL6               0x35c 0x744 0x8ec 0x2 0x2
+#define MX6QDL_PAD_SD2_DAT3__AUD4_TXC               0x35c 0x744 0x7c4 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT3__GPIO1_IO12             0x35c 0x744 0x000 0x5 0x0
 
 #endif /* __DTS_IMX6Q_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts
index 09a7580..334b924 100644
--- a/arch/arm/boot/dts/imx6q-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6q-sabreauto.dts
@@ -20,24 +20,6 @@
 	compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
 };
 
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	hog {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6Q_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
-				MX6Q_PAD_SD2_DAT2__GPIO1_IO13  0x80000000
-			>;
-		};
-	};
-
-	ecspi1 {
-		pinctrl_ecspi1_sabreauto: ecspi1-sabreauto {
-			fsl,pins = <
-				MX6Q_PAD_EIM_D19__GPIO3_IO19  0x80000000
-			>;
-		};
-	};
+&sata {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 6a00066..f004913 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -65,6 +65,12 @@
 	};
 };
 
+&audmux {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_1>;
+};
+
 &ecspi1 {
 	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio3 19 0>;
@@ -79,9 +85,27 @@
 	};
 };
 
-&ssi1 {
-	fsl,mode = "i2s-slave";
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_1>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio3 23 0>;
+	status = "okay";
+};
+
+&i2c1 {
 	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_1>;
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
 };
 
 &iomuxc {
@@ -91,36 +115,69 @@
 	hog {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				MX6Q_PAD_NANDF_D6__GPIO2_IO06 0x80000000
-				MX6Q_PAD_NANDF_D7__GPIO2_IO07 0x80000000
-				MX6Q_PAD_EIM_D19__GPIO3_IO19  0x80000000
-				MX6Q_PAD_EIM_D22__GPIO3_IO22  0x80000000
-				MX6Q_PAD_EIM_D23__GPIO3_IO23  0x80000000
-				MX6Q_PAD_SD3_DAT5__GPIO7_IO00 0x80000000
-				MX6Q_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0
-				MX6Q_PAD_GPIO_0__CCM_CLKO1    0x80000000
+				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000
+				MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x80000000
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x80000000
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23  0x80000000
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x80000000
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23	0x80000000
 			>;
 		};
 	};
 };
 
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg_1>;
-	disable-over-current;
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&sata {
 	status = "okay";
 };
 
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_1>;
+};
+
 &usbh1 {
 	status = "okay";
 };
 
-&fec {
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_1>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio3 23 0>;
+	pinctrl-0 = <&pinctrl_usbotg_1>;
+	disable-over-current;
 	status = "okay";
 };
 
@@ -141,30 +198,3 @@
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
-
-&audmux {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux_1>;
-};
-
-&uart2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_1>;
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1_1>;
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks 169>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
index 0038228..9cbdfe7 100644
--- a/arch/arm/boot/dts/imx6q-sabresd.dts
+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
@@ -20,21 +20,6 @@
 	compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
 };
 
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	hog {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6Q_PAD_GPIO_4__GPIO1_IO04   0x80000000
-				MX6Q_PAD_GPIO_5__GPIO1_IO05   0x80000000
-				MX6Q_PAD_NANDF_D0__GPIO2_IO00 0x80000000
-				MX6Q_PAD_NANDF_D1__GPIO2_IO01 0x80000000
-				MX6Q_PAD_NANDF_D2__GPIO2_IO02 0x80000000
-				MX6Q_PAD_NANDF_D3__GPIO2_IO03 0x80000000
-				MX6Q_PAD_GPIO_0__CCM_CLKO1    0x130b0
-			>;
-		};
-	};
+&sata {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q-udoo.dts b/arch/arm/boot/dts/imx6q-udoo.dts
new file mode 100644
index 0000000..6e1ccdc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-udoo.dts
@@ -0,0 +1,39 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+
+/ {
+	model = "Udoo i.MX6 Quad Board";
+	compatible = "udoo,imx6q-udoo", "fsl,imx6q";
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_1>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_2>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-wandboard.dts b/arch/arm/boot/dts/imx6q-wandboard.dts
new file mode 100644
index 0000000..36be17f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-wandboard.dts
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-wandboard.dtsi"
+
+/ {
+	model = "Wandboard i.MX6 Quad Board";
+	compatible = "wand,imx6q-wandboard", "fsl,imx6q";
+
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index ba09dc3..f024ef2 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -8,8 +8,8 @@
  *
  */
 
-#include "imx6qdl.dtsi"
 #include "imx6q-pinfunc.h"
+#include "imx6qdl.dtsi"
 
 / {
 	cpus {
@@ -61,6 +61,12 @@
 	};
 
 	soc {
+		ocram: sram@00900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x40000>;
+			clocks = <&clks 142>;
+		};
+
 		aips-bus@02000000 { /* AIPS1 */
 			spba-bus@02000000 {
 				ecspi5: ecspi@02018000 {
@@ -77,357 +83,54 @@
 
 			iomuxc: iomuxc@020e0000 {
 				compatible = "fsl,imx6q-iomuxc";
-				reg = <0x020e0000 0x4000>;
-
-				/* shared pinctrl settings */
-				audmux {
-					pinctrl_audmux_1: audmux-1 {
-						fsl,pins = <
-							MX6Q_PAD_SD2_DAT0__AUD4_RXD  0x80000000
-							MX6Q_PAD_SD2_DAT3__AUD4_TXC  0x80000000
-							MX6Q_PAD_SD2_DAT2__AUD4_TXD  0x80000000
-							MX6Q_PAD_SD2_DAT1__AUD4_TXFS 0x80000000
-						>;
-					};
-
-					pinctrl_audmux_2: audmux-2 {
-						fsl,pins = <
-							MX6Q_PAD_CSI0_DAT7__AUD3_RXD  0x80000000
-							MX6Q_PAD_CSI0_DAT4__AUD3_TXC  0x80000000
-							MX6Q_PAD_CSI0_DAT5__AUD3_TXD  0x80000000
-							MX6Q_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000
-						>;
-					};
-				};
-
-				ecspi1 {
-					pinctrl_ecspi1_1: ecspi1grp-1 {
-						fsl,pins = <
-							MX6Q_PAD_EIM_D17__ECSPI1_MISO 0x100b1
-							MX6Q_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
-							MX6Q_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
-						>;
-					};
-				};
-
-				ecspi3 {
-					pinctrl_ecspi3_1: ecspi3grp-1 {
-						fsl,pins = <
-							MX6Q_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
-							MX6Q_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
-							MX6Q_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
-						>;
-					};
-				};
-
-				enet {
-					pinctrl_enet_1: enetgrp-1 {
-						fsl,pins = <
-							MX6Q_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
-							MX6Q_PAD_ENET_MDC__ENET_MDC         0x1b0b0
-							MX6Q_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
-							MX6Q_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
-							MX6Q_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
-							MX6Q_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
-							MX6Q_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
-							MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-							MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-							MX6Q_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-							MX6Q_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-							MX6Q_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-							MX6Q_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-							MX6Q_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-							MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-							MX6Q_PAD_GPIO_16__ENET_REF_CLK      0x4001b0a8
-						>;
-					};
-
-					pinctrl_enet_2: enetgrp-2 {
-						fsl,pins = <
-							MX6Q_PAD_KEY_COL1__ENET_MDIO        0x1b0b0
-							MX6Q_PAD_KEY_COL2__ENET_MDC         0x1b0b0
-							MX6Q_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
-							MX6Q_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
-							MX6Q_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
-							MX6Q_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
-							MX6Q_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
-							MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-							MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-							MX6Q_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-							MX6Q_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-							MX6Q_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-							MX6Q_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-							MX6Q_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-							MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-						>;
-					};
-
-					pinctrl_enet_3: enetgrp-3 {
-						fsl,pins = <
-							MX6Q_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
-							MX6Q_PAD_ENET_MDC__ENET_MDC         0x1b0b0
-							MX6Q_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
-							MX6Q_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
-							MX6Q_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
-							MX6Q_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
-							MX6Q_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
-							MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-							MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-							MX6Q_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-							MX6Q_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-							MX6Q_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-							MX6Q_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-							MX6Q_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-							MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-							MX6Q_PAD_ENET_TX_EN__ENET_TX_EN     0x1b0b0
-						>;
-					};
-				};
-
-				gpmi-nand {
-					pinctrl_gpmi_nand_1: gpmi-nand-1 {
-						fsl,pins = <
-							MX6Q_PAD_NANDF_CLE__NAND_CLE     0xb0b1
-							MX6Q_PAD_NANDF_ALE__NAND_ALE     0xb0b1
-							MX6Q_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
-							MX6Q_PAD_NANDF_RB0__NAND_READY_B 0xb000
-							MX6Q_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
-							MX6Q_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
-							MX6Q_PAD_SD4_CMD__NAND_RE_B      0xb0b1
-							MX6Q_PAD_SD4_CLK__NAND_WE_B      0xb0b1
-							MX6Q_PAD_NANDF_D0__NAND_DATA00   0xb0b1
-							MX6Q_PAD_NANDF_D1__NAND_DATA01   0xb0b1
-							MX6Q_PAD_NANDF_D2__NAND_DATA02   0xb0b1
-							MX6Q_PAD_NANDF_D3__NAND_DATA03   0xb0b1
-							MX6Q_PAD_NANDF_D4__NAND_DATA04   0xb0b1
-							MX6Q_PAD_NANDF_D5__NAND_DATA05   0xb0b1
-							MX6Q_PAD_NANDF_D6__NAND_DATA06   0xb0b1
-							MX6Q_PAD_NANDF_D7__NAND_DATA07   0xb0b1
-							MX6Q_PAD_SD4_DAT0__NAND_DQS      0x00b1
-						>;
-					};
-				};
-
-				i2c1 {
-					pinctrl_i2c1_1: i2c1grp-1 {
-						fsl,pins = <
-							MX6Q_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-							MX6Q_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-						>;
-					};
 
-					pinctrl_i2c1_2: i2c1grp-2 {
-						fsl,pins = <
-							MX6Q_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
-							MX6Q_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
-						>;
-					};
-				};
-
-				i2c2 {
-					pinctrl_i2c2_1: i2c2grp-1 {
-						fsl,pins = <
-							MX6Q_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
-							MX6Q_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
+				ipu2 {
+					pinctrl_ipu2_1: ipu2grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0x10
+							MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15       0x10
+							MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02        0x10
+							MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03        0x10
+							MX6QDL_PAD_DI0_PIN4__IPU2_DI0_PIN04        0x80000000
+							MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00   0x10
+							MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01   0x10
+							MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02   0x10
+							MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03   0x10
+							MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04   0x10
+							MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05   0x10
+							MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06   0x10
+							MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07   0x10
+							MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08   0x10
+							MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09   0x10
+							MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10  0x10
+							MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11  0x10
+							MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12  0x10
+							MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13  0x10
+							MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14  0x10
+							MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15  0x10
+							MX6QDL_PAD_DISP0_DAT16__IPU2_DISP0_DATA16  0x10
+							MX6QDL_PAD_DISP0_DAT17__IPU2_DISP0_DATA17  0x10
+							MX6QDL_PAD_DISP0_DAT18__IPU2_DISP0_DATA18  0x10
+							MX6QDL_PAD_DISP0_DAT19__IPU2_DISP0_DATA19  0x10
+							MX6QDL_PAD_DISP0_DAT20__IPU2_DISP0_DATA20  0x10
+							MX6QDL_PAD_DISP0_DAT21__IPU2_DISP0_DATA21  0x10
+							MX6QDL_PAD_DISP0_DAT22__IPU2_DISP0_DATA22  0x10
+							MX6QDL_PAD_DISP0_DAT23__IPU2_DISP0_DATA23  0x10
 						>;
 					};
 				};
-
-				i2c3 {
-					pinctrl_i2c3_1: i2c3grp-1 {
-						fsl,pins = <
-							MX6Q_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
-							MX6Q_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-						>;
-					};
-				};
-
-				uart1 {
-					pinctrl_uart1_1: uart1grp-1 {
-						fsl,pins = <
-							MX6Q_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
-							MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
-						>;
-					};
-				};
-
-				uart2 {
-					pinctrl_uart2_1: uart2grp-1 {
-						fsl,pins = <
-							MX6Q_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
-							MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
-						>;
-					};
-				};
-
-				uart4 {
-					pinctrl_uart4_1: uart4grp-1 {
-						fsl,pins = <
-							MX6Q_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
-							MX6Q_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
-						>;
-					};
-				};
-
-				usbotg {
-					pinctrl_usbotg_1: usbotggrp-1 {
-						fsl,pins = <
-							MX6Q_PAD_GPIO_1__USB_OTG_ID 0x17059
-						>;
-					};
-
-					pinctrl_usbotg_2: usbotggrp-2 {
-						fsl,pins = <
-							MX6Q_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
-						>;
-					};
-				};
-
-				usdhc2 {
-					pinctrl_usdhc2_1: usdhc2grp-1 {
-						fsl,pins = <
-							MX6Q_PAD_SD2_CMD__SD2_CMD    0x17059
-							MX6Q_PAD_SD2_CLK__SD2_CLK    0x10059
-							MX6Q_PAD_SD2_DAT0__SD2_DATA0 0x17059
-							MX6Q_PAD_SD2_DAT1__SD2_DATA1 0x17059
-							MX6Q_PAD_SD2_DAT2__SD2_DATA2 0x17059
-							MX6Q_PAD_SD2_DAT3__SD2_DATA3 0x17059
-							MX6Q_PAD_NANDF_D4__SD2_DATA4 0x17059
-							MX6Q_PAD_NANDF_D5__SD2_DATA5 0x17059
-							MX6Q_PAD_NANDF_D6__SD2_DATA6 0x17059
-							MX6Q_PAD_NANDF_D7__SD2_DATA7 0x17059
-						>;
-					};
-
-					pinctrl_usdhc2_2: usdhc2grp-2 {
-						fsl,pins = <
-							MX6Q_PAD_SD2_CMD__SD2_CMD    0x17059
-							MX6Q_PAD_SD2_CLK__SD2_CLK    0x10059
-							MX6Q_PAD_SD2_DAT0__SD2_DATA0 0x17059
-							MX6Q_PAD_SD2_DAT1__SD2_DATA1 0x17059
-							MX6Q_PAD_SD2_DAT2__SD2_DATA2 0x17059
-							MX6Q_PAD_SD2_DAT3__SD2_DATA3 0x17059
-						>;
-					};
-				};
-
-				usdhc3 {
-					pinctrl_usdhc3_1: usdhc3grp-1 {
-						fsl,pins = <
-							MX6Q_PAD_SD3_CMD__SD3_CMD    0x17059
-							MX6Q_PAD_SD3_CLK__SD3_CLK    0x10059
-							MX6Q_PAD_SD3_DAT0__SD3_DATA0 0x17059
-							MX6Q_PAD_SD3_DAT1__SD3_DATA1 0x17059
-							MX6Q_PAD_SD3_DAT2__SD3_DATA2 0x17059
-							MX6Q_PAD_SD3_DAT3__SD3_DATA3 0x17059
-							MX6Q_PAD_SD3_DAT4__SD3_DATA4 0x17059
-							MX6Q_PAD_SD3_DAT5__SD3_DATA5 0x17059
-							MX6Q_PAD_SD3_DAT6__SD3_DATA6 0x17059
-							MX6Q_PAD_SD3_DAT7__SD3_DATA7 0x17059
-						>;
-					};
-
-					pinctrl_usdhc3_2: usdhc3grp-2 {
-						fsl,pins = <
-							MX6Q_PAD_SD3_CMD__SD3_CMD    0x17059
-							MX6Q_PAD_SD3_CLK__SD3_CLK    0x10059
-							MX6Q_PAD_SD3_DAT0__SD3_DATA0 0x17059
-							MX6Q_PAD_SD3_DAT1__SD3_DATA1 0x17059
-							MX6Q_PAD_SD3_DAT2__SD3_DATA2 0x17059
-							MX6Q_PAD_SD3_DAT3__SD3_DATA3 0x17059
-						>;
-					};
-				};
-
-				usdhc4 {
-					pinctrl_usdhc4_1: usdhc4grp-1 {
-						fsl,pins = <
-							MX6Q_PAD_SD4_CMD__SD4_CMD    0x17059
-							MX6Q_PAD_SD4_CLK__SD4_CLK    0x10059
-							MX6Q_PAD_SD4_DAT0__SD4_DATA0 0x17059
-							MX6Q_PAD_SD4_DAT1__SD4_DATA1 0x17059
-							MX6Q_PAD_SD4_DAT2__SD4_DATA2 0x17059
-							MX6Q_PAD_SD4_DAT3__SD4_DATA3 0x17059
-							MX6Q_PAD_SD4_DAT4__SD4_DATA4 0x17059
-							MX6Q_PAD_SD4_DAT5__SD4_DATA5 0x17059
-							MX6Q_PAD_SD4_DAT6__SD4_DATA6 0x17059
-							MX6Q_PAD_SD4_DAT7__SD4_DATA7 0x17059
-						>;
-					};
-
-					pinctrl_usdhc4_2: usdhc4grp-2 {
-						fsl,pins = <
-							MX6Q_PAD_SD4_CMD__SD4_CMD    0x17059
-							MX6Q_PAD_SD4_CLK__SD4_CLK    0x10059
-							MX6Q_PAD_SD4_DAT0__SD4_DATA0 0x17059
-							MX6Q_PAD_SD4_DAT1__SD4_DATA1 0x17059
-							MX6Q_PAD_SD4_DAT2__SD4_DATA2 0x17059
-							MX6Q_PAD_SD4_DAT3__SD4_DATA3 0x17059
-						>;
-					};
-				};
-
-				weim {
-					pinctrl_weim_cs0_1: weim_cs0grp-1 {
-						fsl,pins = <
-							MX6Q_PAD_EIM_CS0__EIM_CS0_B   0xb0b1
-						>;
-					};
-
-					pinctrl_weim_nor_1: weimnorgrp-1 {
-						fsl,pins = <
-							MX6Q_PAD_EIM_OE__EIM_OE_B     0xb0b1
-							MX6Q_PAD_EIM_RW__EIM_RW       0xb0b1
-							MX6Q_PAD_EIM_WAIT__EIM_WAIT_B 0xb060
-							/* data */
-							MX6Q_PAD_EIM_D16__EIM_DATA16 0x1b0b0
-							MX6Q_PAD_EIM_D17__EIM_DATA17 0x1b0b0
-							MX6Q_PAD_EIM_D18__EIM_DATA18 0x1b0b0
-							MX6Q_PAD_EIM_D19__EIM_DATA19 0x1b0b0
-							MX6Q_PAD_EIM_D20__EIM_DATA20 0x1b0b0
-							MX6Q_PAD_EIM_D21__EIM_DATA21 0x1b0b0
-							MX6Q_PAD_EIM_D22__EIM_DATA22 0x1b0b0
-							MX6Q_PAD_EIM_D23__EIM_DATA23 0x1b0b0
-							MX6Q_PAD_EIM_D24__EIM_DATA24 0x1b0b0
-							MX6Q_PAD_EIM_D25__EIM_DATA25 0x1b0b0
-							MX6Q_PAD_EIM_D26__EIM_DATA26 0x1b0b0
-							MX6Q_PAD_EIM_D27__EIM_DATA27 0x1b0b0
-							MX6Q_PAD_EIM_D28__EIM_DATA28 0x1b0b0
-							MX6Q_PAD_EIM_D29__EIM_DATA29 0x1b0b0
-							MX6Q_PAD_EIM_D30__EIM_DATA30 0x1b0b0
-							MX6Q_PAD_EIM_D31__EIM_DATA31 0x1b0b0
-							/* address */
-							MX6Q_PAD_EIM_A23__EIM_ADDR23 0xb0b1
-							MX6Q_PAD_EIM_A22__EIM_ADDR22 0xb0b1
-							MX6Q_PAD_EIM_A21__EIM_ADDR21 0xb0b1
-							MX6Q_PAD_EIM_A20__EIM_ADDR20 0xb0b1
-							MX6Q_PAD_EIM_A19__EIM_ADDR19 0xb0b1
-							MX6Q_PAD_EIM_A18__EIM_ADDR18 0xb0b1
-							MX6Q_PAD_EIM_A17__EIM_ADDR17 0xb0b1
-							MX6Q_PAD_EIM_A16__EIM_ADDR16 0xb0b1
-							MX6Q_PAD_EIM_DA15__EIM_AD15  0xb0b1
-							MX6Q_PAD_EIM_DA14__EIM_AD14  0xb0b1
-							MX6Q_PAD_EIM_DA13__EIM_AD13  0xb0b1
-							MX6Q_PAD_EIM_DA12__EIM_AD12  0xb0b1
-							MX6Q_PAD_EIM_DA11__EIM_AD11  0xb0b1
-							MX6Q_PAD_EIM_DA10__EIM_AD10  0xb0b1
-							MX6Q_PAD_EIM_DA9__EIM_AD09   0xb0b1
-							MX6Q_PAD_EIM_DA8__EIM_AD08   0xb0b1
-							MX6Q_PAD_EIM_DA7__EIM_AD07   0xb0b1
-							MX6Q_PAD_EIM_DA6__EIM_AD06   0xb0b1
-							MX6Q_PAD_EIM_DA5__EIM_AD05   0xb0b1
-							MX6Q_PAD_EIM_DA4__EIM_AD04   0xb0b1
-							MX6Q_PAD_EIM_DA3__EIM_AD03   0xb0b1
-							MX6Q_PAD_EIM_DA2__EIM_AD02   0xb0b1
-							MX6Q_PAD_EIM_DA1__EIM_AD01   0xb0b1
-							MX6Q_PAD_EIM_DA0__EIM_AD00   0xb0b1
-						>;
-					};
-
-				};
 			};
 		};
 
+		sata: sata@02200000 {
+			compatible = "fsl,imx6q-ahci";
+			reg = <0x02200000 0x4000>;
+			interrupts = <0 39 0x04>;
+			clocks =  <&clks 154>, <&clks 187>, <&clks 105>;
+			clock-names = "sata", "sata_ref", "ahb";
+			status = "disabled";
+		};
+
 		ipu2: ipu@02800000 {
 			#crtc-cells = <1>;
 			compatible = "fsl,imx6q-ipu";
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index e994011..ff6f1e8 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -45,6 +45,29 @@
 	status = "okay";
 };
 
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
+				MX6QDL_PAD_SD2_DAT2__GPIO1_IO13  0x80000000
+				MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059
+			>;
+		};
+	};
+
+	ecspi1 {
+		pinctrl_ecspi1_sabreauto: ecspi1-sabreauto {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
+			>;
+		};
+	};
+};
+
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4_1>;
@@ -52,8 +75,10 @@
 };
 
 &usdhc3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3_1>;
+	pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>;
 	cd-gpios = <&gpio6 15 0>;
 	wp-gpios = <&gpio1 13 0>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 6e5dfdb..e75e11b 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -27,6 +27,15 @@
 			enable-active-high;
 		};
 
+		reg_usb_h1_vbus: usb_h1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 29 0>;
+			enable-active-high;
+		};
+
 		reg_audio: wm8962_supply {
 			compatible = "regulator-fixed";
 			regulator-name = "wm8962-supply";
@@ -41,12 +50,14 @@
 		volume-up {
 			label = "Volume Up";
 			gpios = <&gpio1 4 0>;
+			gpio-key,wakeup;
 			linux,code = <115>; /* KEY_VOLUMEUP */
 		};
 
 		volume-down {
 			label = "Volume Down";
 			gpios = <&gpio1 5 0>;
+			gpio-key,wakeup;
 			linux,code = <114>; /* KEY_VOLUMEDOWN */
 		};
 	};
@@ -69,6 +80,14 @@
 		mux-int-port = <2>;
 		mux-ext-port = <3>;
 	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		status = "okay";
+	};
 };
 
 &audmux {
@@ -77,10 +96,27 @@
 	status = "okay";
 };
 
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 9 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1_2>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet_1>;
 	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 0>;
 	status = "okay";
 };
 
@@ -93,7 +129,7 @@
 	codec: wm8962@1a {
 		compatible = "wlf,wm8962";
 		reg = <0x1a>;
-		clocks = <&clks 169>;
+		clocks = <&clks 201>;
 		DCVDD-supply = <&reg_audio>;
 		DBVDD-supply = <&reg_audio>;
 		AVDD-supply = <&reg_audio>;
@@ -113,6 +149,75 @@
        };
 };
 
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3_2>;
+	status = "okay";
+
+	egalax_ts@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <7 2>;
+		wakeup-gpios = <&gpio6 7 0>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04   0x80000000
+				MX6QDL_PAD_GPIO_5__GPIO1_IO05   0x80000000
+				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x80000000
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
+				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x80000000
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_1>;
+	status = "okay";
+};
+
 &ssi2 {
 	fsl,mode = "i2s-slave";
 	status = "okay";
@@ -125,6 +230,7 @@
 };
 
 &usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
 	status = "okay";
 };
 
@@ -139,6 +245,7 @@
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2_1>;
+	bus-width = <8>;
 	cd-gpios = <&gpio2 2 0>;
 	wp-gpios = <&gpio2 3 0>;
 	status = "okay";
@@ -147,6 +254,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3_1>;
+	bus-width = <8>;
 	cd-gpios = <&gpio2 0 0>;
 	wp-gpios = <&gpio2 1 0>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
new file mode 100644
index 0000000..35f5479
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -0,0 +1,160 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/ {
+	regulators {
+		compatible = "simple-bus";
+
+		reg_2p5v: 2p5v {
+			compatible = "regulator-fixed";
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6-wandboard-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6-wandboard-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-out;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2_2>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1 	 0x130b0
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02	 0x80000000
+				MX6QDL_PAD_EIM_DA9__GPIO3_IO09	 0x80000000
+				MX6QDL_PAD_EIM_EB1__GPIO2_IO29   0x80000000 /* WL_REF_ON */
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02   0x80000000 /* WL_RST_N */
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* WL_REG_ON */
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE */
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE */
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29   0x80000000
+			>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_1>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio3 29 0>;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif_3>;
+	status = "okay";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_2>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg_1>;
+	disable-over-current;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1_2>;
+	cd-gpios = <&gpio1 2 0>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2_2>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_2>;
+	cd-gpios = <&gpio3 9 0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index f21d259..59154dc 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -14,11 +14,6 @@
 
 / {
 	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
@@ -26,6 +21,18 @@
 		gpio4 = &gpio5;
 		gpio5 = &gpio6;
 		gpio6 = &gpio7;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
 	};
 
 	intc: interrupt-controller@00a01000 {
@@ -81,15 +88,14 @@
 			#size-cells = <1>;
 			reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
 			reg-names = "gpmi-nand", "bch";
-			interrupts = <0 13 0x04>, <0 15 0x04>;
-			interrupt-names = "gpmi-dma", "bch";
+			interrupts = <0 15 0x04>;
+			interrupt-names = "bch";
 			clocks = <&clks 152>, <&clks 153>, <&clks 151>,
 				 <&clks 150>, <&clks 149>;
 			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
 				      "gpmi_bch_apb", "per1_bch";
 			dmas = <&dma_apbh 0>;
 			dma-names = "rx-tx";
-			fsl,gpmi-dma-channel = <0>;
 			status = "disabled";
 		};
 
@@ -110,6 +116,22 @@
 			arm,data-latency = <4 2 3>;
 		};
 
+		pcie: pcie@0x01000000 {
+			compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
+			reg = <0x01ffc000 0x4000>; /* DBI */
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000 /* configuration space */
+				  0x81000000 0 0          0x01f80000 0 0x00010000 /* downstream I/O */
+				  0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			interrupts = <0 123 0x04>;
+			clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>;
+			clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi";
+			status = "disabled";
+		};
+
 		pmu {
 			compatible = "arm,cortex-a9-pmu";
 			interrupts = <0 94 0x04>;
@@ -130,8 +152,23 @@
 				ranges;
 
 				spdif: spdif@02004000 {
+					compatible = "fsl,imx35-spdif";
 					reg = <0x02004000 0x4000>;
 					interrupts = <0 52 0x04>;
+					dmas = <&sdma 14 18 0>,
+					       <&sdma 15 18 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks 197>, <&clks 3>,
+						 <&clks 197>, <&clks 107>,
+						 <&clks 0>,   <&clks 118>,
+						 <&clks 62>,  <&clks 139>,
+						 <&clks 0>;
+					clock-names = "core",  "rxtx0",
+						      "rxtx1", "rxtx2",
+						      "rxtx3", "rxtx4",
+						      "rxtx5", "rxtx6",
+						      "rxtx7";
+					status = "disabled";
 				};
 
 				ecspi1: ecspi@02008000 {
@@ -184,6 +221,8 @@
 					interrupts = <0 26 0x04>;
 					clocks = <&clks 160>, <&clks 161>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -197,6 +236,9 @@
 					reg = <0x02028000 0x4000>;
 					interrupts = <0 46 0x04>;
 					clocks = <&clks 178>;
+					dmas = <&sdma 37 1 0>,
+					       <&sdma 38 1 0>;
+					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					fsl,ssi-dma-events = <38 37>;
 					status = "disabled";
@@ -207,6 +249,9 @@
 					reg = <0x0202c000 0x4000>;
 					interrupts = <0 47 0x04>;
 					clocks = <&clks 179>;
+					dmas = <&sdma 41 1 0>,
+					       <&sdma 42 1 0>;
+					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					fsl,ssi-dma-events = <42 41>;
 					status = "disabled";
@@ -217,6 +262,9 @@
 					reg = <0x02030000 0x4000>;
 					interrupts = <0 48 0x04>;
 					clocks = <&clks 180>;
+					dmas = <&sdma 45 1 0>,
+					       <&sdma 46 1 0>;
+					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					fsl,ssi-dma-events = <46 45>;
 					status = "disabled";
@@ -278,17 +326,23 @@
 			};
 
 			can1: flexcan@02090000 {
+				compatible = "fsl,imx6q-flexcan";
 				reg = <0x02090000 0x4000>;
 				interrupts = <0 110 0x04>;
+				clocks = <&clks 108>, <&clks 109>;
+				clock-names = "ipg", "per";
 			};
 
 			can2: flexcan@02094000 {
+				compatible = "fsl,imx6q-flexcan";
 				reg = <0x02094000 0x4000>;
 				interrupts = <0 111 0x04>;
+				clocks = <&clks 110>, <&clks 111>;
+				clock-names = "ipg", "per";
 			};
 
 			gpt: gpt@02098000 {
-				compatible = "fsl,imx6q-gpt";
+				compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt";
 				reg = <0x02098000 0x4000>;
 				interrupts = <0 55 0x04>;
 				clocks = <&clks 119>, <&clks 120>;
@@ -491,6 +545,13 @@
 				};
 			};
 
+			tempmon: tempmon {
+				compatible = "fsl,imx6q-tempmon";
+				interrupts = <0 49 0x04>;
+				fsl,tempmon = <&anatop>;
+				fsl,tempmon-data = <&ocotp>;
+			};
+
 			usbphy1: usbphy@020c9000 {
 				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 				reg = <0x020c9000 0x1000>;
@@ -546,6 +607,749 @@
 				reg = <0x020e0000 0x38>;
 			};
 
+			iomuxc: iomuxc@020e0000 {
+				compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc";
+				reg = <0x020e0000 0x4000>;
+
+				audmux {
+					pinctrl_audmux_1: audmux-1 {
+						fsl,pins = <
+							MX6QDL_PAD_SD2_DAT0__AUD4_RXD  0x80000000
+							MX6QDL_PAD_SD2_DAT3__AUD4_TXC  0x80000000
+							MX6QDL_PAD_SD2_DAT2__AUD4_TXD  0x80000000
+							MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x80000000
+						>;
+					};
+
+					pinctrl_audmux_2: audmux-2 {
+						fsl,pins = <
+							MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x80000000
+							MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x80000000
+							MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x80000000
+							MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000
+						>;
+					};
+
+					pinctrl_audmux_3: audmux-3 {
+						fsl,pins = <
+							MX6QDL_PAD_DISP0_DAT16__AUD5_TXC  0x80000000
+							MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x80000000
+							MX6QDL_PAD_DISP0_DAT19__AUD5_RXD  0x80000000
+						>;
+					};
+				};
+
+				ecspi1 {
+					pinctrl_ecspi1_1: ecspi1grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+							MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+							MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+						>;
+					};
+
+					pinctrl_ecspi1_2: ecspi1grp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
+							MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
+							MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+						>;
+					};
+				};
+
+				ecspi3 {
+					pinctrl_ecspi3_1: ecspi3grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
+							MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
+							MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
+						>;
+					};
+				};
+
+				enet {
+					pinctrl_enet_1: enetgrp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
+							MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
+							MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
+							MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
+							MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
+							MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
+							MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
+							MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+							MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+							MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
+							MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
+							MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
+							MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
+							MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
+							MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+							MX6QDL_PAD_GPIO_16__ENET_REF_CLK      0x4001b0a8
+						>;
+					};
+
+					pinctrl_enet_2: enetgrp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_KEY_COL1__ENET_MDIO        0x1b0b0
+							MX6QDL_PAD_KEY_COL2__ENET_MDC         0x1b0b0
+							MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
+							MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
+							MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
+							MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
+							MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
+							MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+							MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+							MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
+							MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
+							MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
+							MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
+							MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
+							MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+						>;
+					};
+
+					pinctrl_enet_3: enetgrp-3 {
+						fsl,pins = <
+							MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
+							MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
+							MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
+							MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
+							MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
+							MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
+							MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
+							MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+							MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+							MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
+							MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
+							MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
+							MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
+							MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
+							MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+							MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN     0x1b0b0
+						>;
+					};
+				};
+
+				esai {
+					pinctrl_esai_1: esaigrp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1b030
+							MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK  0x1b030
+							MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS     0x1b030
+							MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2  0x1b030
+							MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3   0x1b030
+							MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1   0x1b030
+							MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0    0x1b030
+							MX6QDL_PAD_NANDF_CS2__ESAI_TX0       0x1b030
+							MX6QDL_PAD_NANDF_CS3__ESAI_TX1       0x1b030
+						>;
+					};
+
+					pinctrl_esai_2: esaigrp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030
+							MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS    0x1b030
+							MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030
+							MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3     0x1b030
+							MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1  0x1b030
+							MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0   0x1b030
+							MX6QDL_PAD_GPIO_17__ESAI_TX0        0x1b030
+							MX6QDL_PAD_NANDF_CS3__ESAI_TX1      0x1b030
+							MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK   0x1b030
+							MX6QDL_PAD_GPIO_9__ESAI_RX_FS       0x1b030
+						>;
+					};
+				};
+
+				flexcan1 {
+					pinctrl_flexcan1_1: flexcan1grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
+							MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000
+						>;
+					};
+
+					pinctrl_flexcan1_2: flexcan1grp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_GPIO_7__FLEXCAN1_TX   0x80000000
+							MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
+						>;
+					};
+				};
+
+				flexcan2 {
+					pinctrl_flexcan2_1: flexcan2grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x80000000
+							MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x80000000
+						>;
+					};
+				};
+
+				gpmi-nand {
+					pinctrl_gpmi_nand_1: gpmi-nand-1 {
+						fsl,pins = <
+							MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
+							MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
+							MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
+							MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+							MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
+							MX6QDL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
+							MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
+							MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
+							MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
+							MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
+							MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
+							MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
+							MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
+							MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
+							MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
+							MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
+							MX6QDL_PAD_SD4_DAT0__NAND_DQS      0x00b1
+						>;
+					};
+				};
+
+				hdmi_hdcp {
+					pinctrl_hdmi_hdcp_1: hdmihdcpgrp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x4001b8b1
+							MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1
+						>;
+					};
+
+					pinctrl_hdmi_hdcp_2: hdmihdcpgrp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x4001b8b1
+							MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x4001b8b1
+						>;
+					};
+
+					pinctrl_hdmi_hdcp_3: hdmihdcpgrp-3 {
+						fsl,pins = <
+							MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL  0x4001b8b1
+							MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1
+						>;
+					};
+				};
+
+				hdmi_cec {
+					pinctrl_hdmi_cec_1: hdmicecgrp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0
+						>;
+					};
+
+					pinctrl_hdmi_cec_2: hdmicecgrp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+						>;
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1_1: i2c1grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+							MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+						>;
+					};
+
+					pinctrl_i2c1_2: i2c1grp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+							MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+						>;
+					};
+				};
+
+				i2c2 {
+					pinctrl_i2c2_1: i2c2grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
+							MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
+						>;
+					};
+
+					pinctrl_i2c2_2: i2c2grp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+							MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+						>;
+					};
+
+					pinctrl_i2c2_3: i2c2grp-3 {
+						fsl,pins = <
+							MX6QDL_PAD_EIM_EB2__I2C2_SCL  0x4001b8b1
+							MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+						>;
+					};
+				};
+
+				i2c3 {
+					pinctrl_i2c3_1: i2c3grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+							MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+						>;
+					};
+
+					pinctrl_i2c3_2: i2c3grp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+							MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+						>;
+					};
+
+					pinctrl_i2c3_3: i2c3grp-3 {
+						fsl,pins = <
+							MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
+							MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
+						>;
+					};
+
+					pinctrl_i2c3_4: i2c3grp-4 {
+						fsl,pins = <
+							MX6QDL_PAD_GPIO_3__I2C3_SCL  0x4001b8b1
+							MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+						>;
+					};
+				};
+
+				ipu1 {
+					pinctrl_ipu1_1: ipu1grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+							MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+							MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+							MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+							MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04        0x80000000
+							MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+							MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+							MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+							MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+							MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+							MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+							MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+							MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+							MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+							MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+							MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+							MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+							MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+							MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+							MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+							MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+							MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+							MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+							MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+							MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+							MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+							MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+							MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+							MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+						>;
+					};
+
+					pinctrl_ipu1_2: ipu1grp-2 { /* parallel camera */
+						fsl,pins = <
+							MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x80000000
+							MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x80000000
+							MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x80000000
+							MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x80000000
+							MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x80000000
+							MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x80000000
+							MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x80000000
+							MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x80000000
+							MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x80000000
+							MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x80000000
+							MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x80000000
+							MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x80000000
+						>;
+					};
+
+					pinctrl_ipu1_3: ipu1grp-3 { /* parallel port 16-bit */
+						fsl,pins = <
+							MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04   0x80000000
+							MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05   0x80000000
+							MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06   0x80000000
+							MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07   0x80000000
+							MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08   0x80000000
+							MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09   0x80000000
+							MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10  0x80000000
+							MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11  0x80000000
+							MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0x80000000
+							MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0x80000000
+							MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0x80000000
+							MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0x80000000
+							MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0x80000000
+							MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0x80000000
+							MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0x80000000
+							MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0x80000000
+							MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x80000000
+							MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0x80000000
+							MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0x80000000
+						>;
+					};
+				};
+
+				mlb {
+					pinctrl_mlb_1: mlbgrp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_GPIO_3__MLB_CLK  0x71
+							MX6QDL_PAD_GPIO_6__MLB_SIG  0x71
+							MX6QDL_PAD_GPIO_2__MLB_DATA 0x71
+						>;
+					};
+
+					pinctrl_mlb_2: mlbgrp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_ENET_TXD1__MLB_CLK 0x71
+							MX6QDL_PAD_GPIO_6__MLB_SIG    0x71
+							MX6QDL_PAD_GPIO_2__MLB_DATA   0x71
+						>;
+					};
+				};
+
+				pwm0 {
+					pinctrl_pwm0_1: pwm0grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+						>;
+					};
+				};
+
+				pwm3 {
+					pinctrl_pwm3_1: pwm3grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+						>;
+					};
+				};
+
+				spdif {
+					pinctrl_spdif_1: spdifgrp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0
+						>;
+					};
+
+					pinctrl_spdif_2: spdifgrp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
+							MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
+						>;
+					};
+
+					pinctrl_spdif_3: spdifgrp-3 {
+						fsl,pins = <
+							MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1b0b0
+						>;
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1_1: uart1grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+							MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+						>;
+					};
+				};
+
+				uart2 {
+					pinctrl_uart2_1: uart2grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+							MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+						>;
+					};
+
+					pinctrl_uart2_2: uart2grp-2 { /* DTE mode */
+						fsl,pins = <
+							MX6QDL_PAD_EIM_D26__UART2_RX_DATA   0x1b0b1
+							MX6QDL_PAD_EIM_D27__UART2_TX_DATA   0x1b0b1
+							MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x1b0b1
+							MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1
+						>;
+					};
+				};
+
+				uart3 {
+					pinctrl_uart3_1: uart3grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x1b0b1
+							MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x1b0b1
+							MX6QDL_PAD_EIM_D30__UART3_CTS_B   0x1b0b1
+							MX6QDL_PAD_EIM_EB3__UART3_RTS_B   0x1b0b1
+						>;
+					};
+
+					pinctrl_uart3_2: uart3grp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+							MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+							MX6QDL_PAD_EIM_D23__UART3_CTS_B	  0x1b0b1
+							MX6QDL_PAD_EIM_EB3__UART3_RTS_B	  0x1b0b1
+						>;
+					};
+				};
+
+				uart4 {
+					pinctrl_uart4_1: uart4grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+							MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+						>;
+					};
+				};
+
+				usbotg {
+					pinctrl_usbotg_1: usbotggrp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+						>;
+					};
+
+					pinctrl_usbotg_2: usbotggrp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+						>;
+					};
+				};
+
+				usbh2 {
+					pinctrl_usbh2_1: usbh2grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_RGMII_TXC__USB_H2_DATA      0x40013030
+							MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x40013030
+						>;
+					};
+
+					pinctrl_usbh2_2: usbh2grp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x40017030
+						>;
+					};
+				};
+
+				usbh3 {
+					pinctrl_usbh3_1: usbh3grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA 0x40013030
+							MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE  0x40013030
+						>;
+					};
+
+					pinctrl_usbh3_2: usbh3grp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE 0x40017030
+						>;
+					};
+				};
+
+				usdhc1 {
+					pinctrl_usdhc1_1: usdhc1grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+							MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+							MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+							MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+							MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+							MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+							MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17059
+							MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17059
+							MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17059
+							MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17059
+						>;
+					};
+
+					pinctrl_usdhc1_2: usdhc1grp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+							MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+							MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+							MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+							MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+							MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+						>;
+					};
+				};
+
+				usdhc2 {
+					pinctrl_usdhc2_1: usdhc2grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+							MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+							MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+							MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+							MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+							MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+							MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059
+							MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059
+							MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059
+							MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059
+						>;
+					};
+
+					pinctrl_usdhc2_2: usdhc2grp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+							MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+							MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+							MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+							MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+							MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+						>;
+					};
+				};
+
+				usdhc3 {
+					pinctrl_usdhc3_1: usdhc3grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+							MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+							MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+							MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+							MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+							MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+							MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+							MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+							MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+							MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+						>;
+					};
+
+					pinctrl_usdhc3_1_100mhz: usdhc3grp-1-100mhz { /* 100Mhz */
+						fsl,pins = <
+							MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
+							MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
+							MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
+							MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
+							MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
+							MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
+							MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9
+							MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9
+							MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9
+							MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9
+						>;
+					};
+
+					pinctrl_usdhc3_1_200mhz: usdhc3grp-1-200mhz { /* 200Mhz */
+						fsl,pins = <
+							MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
+							MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
+							MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+							MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+							MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+							MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+							MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9
+							MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9
+							MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9
+							MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9
+						>;
+					};
+
+					pinctrl_usdhc3_2: usdhc3grp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+							MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+							MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+							MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+							MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+							MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+						>;
+					};
+				};
+
+				usdhc4 {
+					pinctrl_usdhc4_1: usdhc4grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_SD4_CMD__SD4_CMD    0x17059
+							MX6QDL_PAD_SD4_CLK__SD4_CLK    0x10059
+							MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+							MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+							MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+							MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+							MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+							MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+							MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+							MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+						>;
+					};
+
+					pinctrl_usdhc4_2: usdhc4grp-2 {
+						fsl,pins = <
+							MX6QDL_PAD_SD4_CMD__SD4_CMD    0x17059
+							MX6QDL_PAD_SD4_CLK__SD4_CLK    0x10059
+							MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+							MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+							MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+							MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+						>;
+					};
+				};
+
+				weim {
+					pinctrl_weim_cs0_1: weim_cs0grp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_EIM_CS0__EIM_CS0_B   0xb0b1
+						>;
+					};
+
+					pinctrl_weim_nor_1: weim_norgrp-1 {
+						fsl,pins = <
+							MX6QDL_PAD_EIM_OE__EIM_OE_B     0xb0b1
+							MX6QDL_PAD_EIM_RW__EIM_RW       0xb0b1
+							MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060
+							/* data */
+							MX6QDL_PAD_EIM_D16__EIM_DATA16 0x1b0b0
+							MX6QDL_PAD_EIM_D17__EIM_DATA17 0x1b0b0
+							MX6QDL_PAD_EIM_D18__EIM_DATA18 0x1b0b0
+							MX6QDL_PAD_EIM_D19__EIM_DATA19 0x1b0b0
+							MX6QDL_PAD_EIM_D20__EIM_DATA20 0x1b0b0
+							MX6QDL_PAD_EIM_D21__EIM_DATA21 0x1b0b0
+							MX6QDL_PAD_EIM_D22__EIM_DATA22 0x1b0b0
+							MX6QDL_PAD_EIM_D23__EIM_DATA23 0x1b0b0
+							MX6QDL_PAD_EIM_D24__EIM_DATA24 0x1b0b0
+							MX6QDL_PAD_EIM_D25__EIM_DATA25 0x1b0b0
+							MX6QDL_PAD_EIM_D26__EIM_DATA26 0x1b0b0
+							MX6QDL_PAD_EIM_D27__EIM_DATA27 0x1b0b0
+							MX6QDL_PAD_EIM_D28__EIM_DATA28 0x1b0b0
+							MX6QDL_PAD_EIM_D29__EIM_DATA29 0x1b0b0
+							MX6QDL_PAD_EIM_D30__EIM_DATA30 0x1b0b0
+							MX6QDL_PAD_EIM_D31__EIM_DATA31 0x1b0b0
+							/* address */
+							MX6QDL_PAD_EIM_A23__EIM_ADDR23 0xb0b1
+							MX6QDL_PAD_EIM_A22__EIM_ADDR22 0xb0b1
+							MX6QDL_PAD_EIM_A21__EIM_ADDR21 0xb0b1
+							MX6QDL_PAD_EIM_A20__EIM_ADDR20 0xb0b1
+							MX6QDL_PAD_EIM_A19__EIM_ADDR19 0xb0b1
+							MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0b1
+							MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0b1
+							MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0b1
+							MX6QDL_PAD_EIM_DA15__EIM_AD15  0xb0b1
+							MX6QDL_PAD_EIM_DA14__EIM_AD14  0xb0b1
+							MX6QDL_PAD_EIM_DA13__EIM_AD13  0xb0b1
+							MX6QDL_PAD_EIM_DA12__EIM_AD12  0xb0b1
+							MX6QDL_PAD_EIM_DA11__EIM_AD11  0xb0b1
+							MX6QDL_PAD_EIM_DA10__EIM_AD10  0xb0b1
+							MX6QDL_PAD_EIM_DA9__EIM_AD09   0xb0b1
+							MX6QDL_PAD_EIM_DA8__EIM_AD08   0xb0b1
+							MX6QDL_PAD_EIM_DA7__EIM_AD07   0xb0b1
+							MX6QDL_PAD_EIM_DA6__EIM_AD06   0xb0b1
+							MX6QDL_PAD_EIM_DA5__EIM_AD05   0xb0b1
+							MX6QDL_PAD_EIM_DA4__EIM_AD04   0xb0b1
+							MX6QDL_PAD_EIM_DA3__EIM_AD03   0xb0b1
+							MX6QDL_PAD_EIM_DA2__EIM_AD02   0xb0b1
+							MX6QDL_PAD_EIM_DA1__EIM_AD01   0xb0b1
+							MX6QDL_PAD_EIM_DA0__EIM_AD00   0xb0b1
+						>;
+					};
+				};
+			};
+
 			ldb: ldb@020e0008 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -555,13 +1359,11 @@
 
 				lvds-channel@0 {
 					reg = <0>;
-					crtcs = <&ipu1 0>;
 					status = "disabled";
 				};
 
 				lvds-channel@1 {
 					reg = <1>;
-					crtcs = <&ipu1 1>;
 					status = "disabled";
 				};
 			};
@@ -582,6 +1384,7 @@
 				interrupts = <0 2 0x04>;
 				clocks = <&clks 155>, <&clks 155>;
 				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
 			};
 		};
@@ -751,8 +1554,8 @@
 				clocks = <&clks 196>;
 			};
 
-			ocotp@021bc000 {
-				compatible = "fsl,imx6q-ocotp";
+			ocotp: ocotp@021bc000 {
+				compatible = "fsl,imx6q-ocotp", "syscon";
 				reg = <0x021bc000 0x4000>;
 			};
 
@@ -791,6 +1594,8 @@
 				interrupts = <0 27 0x04>;
 				clocks = <&clks 160>, <&clks 161>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -800,6 +1605,8 @@
 				interrupts = <0 28 0x04>;
 				clocks = <&clks 160>, <&clks 161>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -809,6 +1616,8 @@
 				interrupts = <0 29 0x04>;
 				clocks = <&clks 160>, <&clks 161>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -818,6 +1627,8 @@
 				interrupts = <0 30 0x04>;
 				clocks = <&clks 160>, <&clks 161>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index 2886a59..cc68e19 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -17,6 +17,44 @@
 	memory {
 		reg = <0x80000000 0x40000000>;
 	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_usb_otg1_vbus: usb_otg1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_otg1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 0 0>;
+			enable-active-high;
+		};
+
+		reg_usb_otg2_vbus: usb_otg2_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_otg2_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 2 0>;
+			enable-active-high;
+		};
+	};
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 11 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1_1>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
 };
 
 &fec {
@@ -38,6 +76,8 @@
 				MX6SL_PAD_SD2_DAT7__GPIO5_IO00    0x17059
 				MX6SL_PAD_SD2_DAT6__GPIO4_IO29    0x17059
 				MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
+				MX6SL_PAD_KEY_COL4__GPIO4_IO00	0x80000000
+				MX6SL_PAD_KEY_COL5__GPIO4_IO02	0x80000000
 			>;
 		};
 	};
@@ -49,9 +89,26 @@
 	status = "okay";
 };
 
-&usdhc1 {
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1_1>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1_1>;
+	pinctrl-1 = <&pinctrl_usdhc1_1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_1_200mhz>;
 	bus-width = <8>;
 	cd-gpios = <&gpio4 7 0>;
 	wp-gpios = <&gpio4 6 0>;
@@ -59,16 +116,20 @@
 };
 
 &usdhc2 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc2_1>;
+	pinctrl-1 = <&pinctrl_usdhc2_1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_1_200mhz>;
 	cd-gpios = <&gpio5 0 0>;
 	wp-gpios = <&gpio4 29 0>;
 	status = "okay";
 };
 
 &usdhc3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3_1>;
+	pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>;
 	cd-gpios = <&gpio3 22 0>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index c5e5da0..28558f1 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -13,16 +13,20 @@
 
 / {
 	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
 		gpio3 = &gpio4;
 		gpio4 = &gpio5;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
 	};
 
 	cpus {
@@ -152,32 +156,41 @@
 				};
 
 				uart5: serial@02018000 {
-					compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02018000 0x4000>;
 					interrupts = <0 30 0x04>;
 					clocks = <&clks IMX6SL_CLK_UART>,
 						 <&clks IMX6SL_CLK_UART_SERIAL>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
 				uart1: serial@02020000 {
-					compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02020000 0x4000>;
 					interrupts = <0 26 0x04>;
 					clocks = <&clks IMX6SL_CLK_UART>,
 						 <&clks IMX6SL_CLK_UART_SERIAL>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
 				uart2: serial@02024000 {
-					compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02024000 0x4000>;
 					interrupts = <0 27 0x04>;
 					clocks = <&clks IMX6SL_CLK_UART>,
 						 <&clks IMX6SL_CLK_UART_SERIAL>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -186,6 +199,9 @@
 					reg = <0x02028000 0x4000>;
 					interrupts = <0 46 0x04>;
 					clocks = <&clks IMX6SL_CLK_SSI1>;
+					dmas = <&sdma 37 1 0>,
+					       <&sdma 38 1 0>;
+					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					status = "disabled";
 				};
@@ -195,6 +211,9 @@
 					reg = <0x0202c000 0x4000>;
 					interrupts = <0 47 0x04>;
 					clocks = <&clks IMX6SL_CLK_SSI2>;
+					dmas = <&sdma 41 1 0>,
+					       <&sdma 42 1 0>;
+					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					status = "disabled";
 				};
@@ -204,27 +223,36 @@
 					reg = <0x02030000 0x4000>;
 					interrupts = <0 48 0x04>;
 					clocks = <&clks IMX6SL_CLK_SSI3>;
+					dmas = <&sdma 45 1 0>,
+					       <&sdma 46 1 0>;
+					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					status = "disabled";
 				};
 
 				uart3: serial@02034000 {
-					compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02034000 0x4000>;
 					interrupts = <0 28 0x04>;
 					clocks = <&clks IMX6SL_CLK_UART>,
 						 <&clks IMX6SL_CLK_UART_SERIAL>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
 				uart4: serial@02038000 {
-					compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02038000 0x4000>;
 					interrupts = <0 29 0x04>;
 					clocks = <&clks IMX6SL_CLK_UART>,
 						 <&clks IMX6SL_CLK_UART_SERIAL>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 			};
@@ -356,7 +384,9 @@
 			};
 
 			anatop: anatop@020c8000 {
-				compatible = "fsl,imx6sl-anatop", "syscon", "simple-bus";
+				compatible = "fsl,imx6sl-anatop",
+					     "fsl,imx6q-anatop",
+					     "syscon", "simple-bus";
 				reg = <0x020c8000 0x1000>;
 				interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
 
@@ -504,10 +534,26 @@
 				interrupts = <0 89 0x04>;
 			};
 
+			gpr: iomuxc-gpr@020e0000 {
+				compatible = "fsl,imx6sl-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e0000 0x38>;
+			};
+
 			iomuxc: iomuxc@020e0000 {
 				compatible = "fsl,imx6sl-iomuxc";
 				reg = <0x020e0000 0x4000>;
 
+				ecspi1 {
+					pinctrl_ecspi1_1: ecspi1grp-1 {
+						fsl,pins = <
+							MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x100b1
+							MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x100b1
+							MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x100b1
+						>;
+					};
+				};
+
 				fec {
 					pinctrl_fec_1: fecgrp-1 {
 						fsl,pins = <
@@ -533,6 +579,64 @@
 					};
 				};
 
+				usbotg1 {
+					pinctrl_usbotg1_1: usbotg1grp-1 {
+						fsl,pins = <
+							MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+						>;
+					};
+
+					pinctrl_usbotg1_2: usbotg1grp-2 {
+						fsl,pins = <
+							MX6SL_PAD_FEC_RXD0__USB_OTG1_ID 0x17059
+						>;
+					};
+
+					pinctrl_usbotg1_3: usbotg1grp-3 {
+						fsl,pins = <
+							MX6SL_PAD_LCD_DAT1__USB_OTG1_ID 0x17059
+						>;
+					};
+
+					pinctrl_usbotg1_4: usbotg1grp-4 {
+						fsl,pins = <
+							MX6SL_PAD_REF_CLK_32K__USB_OTG1_ID 0x17059
+						>;
+					};
+
+					pinctrl_usbotg1_5: usbotg1grp-5 {
+						fsl,pins = <
+							MX6SL_PAD_SD3_DAT0__USB_OTG1_ID 0x17059
+						>;
+					};
+				};
+
+				usbotg2 {
+					pinctrl_usbotg2_1: usbotg2grp-1 {
+						fsl,pins = <
+							MX6SL_PAD_ECSPI1_SCLK__USB_OTG2_OC 0x17059
+						>;
+					};
+
+					pinctrl_usbotg2_2: usbotg2grp-2 {
+						fsl,pins = <
+							MX6SL_PAD_ECSPI2_SCLK__USB_OTG2_OC 0x17059
+						>;
+					};
+
+					pinctrl_usbotg2_3: usbotg2grp-3 {
+						fsl,pins = <
+							MX6SL_PAD_KEY_ROW5__USB_OTG2_OC 0x17059
+						>;
+					};
+
+					pinctrl_usbotg2_4: usbotg2grp-4 {
+						fsl,pins = <
+							MX6SL_PAD_SD3_DAT2__USB_OTG2_OC 0x17059
+						>;
+					};
+				};
+
 				usdhc1 {
 					pinctrl_usdhc1_1: usdhc1grp-1 {
 						fsl,pins = <
@@ -548,6 +652,38 @@
 							MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059
 						>;
 					};
+
+					pinctrl_usdhc1_1_100mhz: usdhc1grp-1-100mhz {
+						fsl,pins = <
+							MX6SL_PAD_SD1_CMD__SD1_CMD 0x170b9
+							MX6SL_PAD_SD1_CLK__SD1_CLK 0x100b9
+							MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170b9
+							MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170b9
+							MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170b9
+							MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170b9
+							MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170b9
+							MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170b9
+							MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170b9
+							MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170b9
+						>;
+					};
+
+					pinctrl_usdhc1_1_200mhz: usdhc1grp-1-200mhz {
+						fsl,pins = <
+							MX6SL_PAD_SD1_CMD__SD1_CMD 0x170f9
+							MX6SL_PAD_SD1_CLK__SD1_CLK 0x100f9
+							MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
+							MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
+							MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
+							MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
+							MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170f9
+							MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170f9
+							MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170f9
+							MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170f9
+						>;
+					};
+
+
 				};
 
 				usdhc2 {
@@ -561,6 +697,29 @@
 							MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059
 						>;
 					};
+
+					pinctrl_usdhc2_1_100mhz: usdhc2grp-1-100mhz {
+						fsl,pins = <
+							MX6SL_PAD_SD2_CMD__SD2_CMD    0x170b9
+							MX6SL_PAD_SD2_CLK__SD2_CLK    0x100b9
+							MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
+							MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
+							MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
+							MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
+						>;
+					};
+
+					pinctrl_usdhc2_1_200mhz: usdhc2grp-1-200mhz {
+						fsl,pins = <
+							MX6SL_PAD_SD2_CMD__SD2_CMD    0x170f9
+							MX6SL_PAD_SD2_CLK__SD2_CLK    0x100f9
+							MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
+							MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
+							MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
+							MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
+						>;
+					};
+
 				};
 
 				usdhc3 {
@@ -574,6 +733,28 @@
 							MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x17059
 						>;
 					};
+
+					pinctrl_usdhc3_1_100mhz: usdhc3grp-1-100mhz {
+						fsl,pins = <
+							MX6SL_PAD_SD3_CMD__SD3_CMD    0x170b9
+							MX6SL_PAD_SD3_CLK__SD3_CLK    0x100b9
+							MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
+							MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
+							MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
+							MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
+						>;
+					};
+
+					pinctrl_usdhc3_1_200mhz: usdhc3grp-1-200mhz {
+						fsl,pins = <
+							MX6SL_PAD_SD3_CMD__SD3_CMD    0x170f9
+							MX6SL_PAD_SD3_CLK__SD3_CLK    0x100f9
+							MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+							MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+							MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+							MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+						>;
+					};
 				};
 			};
 
@@ -594,7 +775,9 @@
 				clocks = <&clks IMX6SL_CLK_SDMA>,
 					 <&clks IMX6SL_CLK_SDMA>;
 				clock-names = "ipg", "ahb";
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6sl.bin";
+				#dma-cells = <3>;
+				/* imx6sl reuses imx6q sdma firmware */
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
 			};
 
 			pxp: pxp@020f0000 {
@@ -638,7 +821,7 @@
 			usbotg2: usb@02184200 {
 				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
 				reg = <0x02184200 0x200>;
-				interrupts = <0 40 0x04>;
+				interrupts = <0 42 0x04>;
 				clocks = <&clks IMX6SL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy2>;
 				fsl,usbmisc = <&usbmisc 1>;
@@ -648,7 +831,7 @@
 			usbh: usb@02184400 {
 				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
 				reg = <0x02184400 0x200>;
-				interrupts = <0 42 0x04>;
+				interrupts = <0 40 0x04>;
 				clocks = <&clks IMX6SL_CLK_USBOH3>;
 				fsl,usbmisc = <&usbmisc 2>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi
index 813b91d..0f06f86 100644
--- a/arch/arm/boot/dts/integrator.dtsi
+++ b/arch/arm/boot/dts/integrator.dtsi
@@ -5,6 +5,11 @@
 /include/ "skeleton.dtsi"
 
 / {
+	core-module@10000000 {
+		compatible = "arm,core-module-integrator";
+		reg = <0x10000000 0x200>;
+	};
+
 	timer@13000000 {
 		reg = <0x13000000 0x100>;
 		interrupt-parent = <&pic>;
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts
index b6b82ec..e6be931 100644
--- a/arch/arm/boot/dts/integratorap.dts
+++ b/arch/arm/boot/dts/integratorap.dts
@@ -19,8 +19,11 @@
 	};
 
 	syscon {
-		/* AP system controller registers */
+		compatible = "arm,integrator-ap-syscon";
 		reg = <0x11000000 0x100>;
+		interrupt-parent = <&pic>;
+		/* These are the logical module IRQs */
+		interrupts = <9>, <10>, <11>, <12>;
 	};
 
 	timer0: timer@13000000 {
diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts
index ff1aea0..7deb3a3 100644
--- a/arch/arm/boot/dts/integratorcp.dts
+++ b/arch/arm/boot/dts/integratorcp.dts
@@ -9,29 +9,28 @@
 	model = "ARM Integrator/CP";
 	compatible = "arm,integrator-cp";
 
-	aliases {
-		arm,timer-primary = &timer2;
-		arm,timer-secondary = &timer1;
-	};
-
 	chosen {
 		bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk";
 	};
 
-	cpcon {
-		/* CP controller registers */
+	syscon {
+		compatible = "arm,integrator-cp-syscon";
 		reg = <0xcb000000 0x100>;
 	};
 
 	timer0: timer@13000000 {
+		/* TIMER0 runs @ 25MHz */
 		compatible = "arm,integrator-cp-timer";
+		status = "disabled";
 	};
 
 	timer1: timer@13000100 {
+		/* TIMER1 runs @ 1MHz */
 		compatible = "arm,integrator-cp-timer";
 	};
 
 	timer2: timer@13000200 {
+		/* TIMER2 runs @ 1MHz */
 		compatible = "arm,integrator-cp-timer";
 	};
 
diff --git a/arch/arm/boot/dts/keystone-clocks.dtsi b/arch/arm/boot/dts/keystone-clocks.dtsi
new file mode 100644
index 0000000..d6713b1
--- /dev/null
+++ b/arch/arm/boot/dts/keystone-clocks.dtsi
@@ -0,0 +1,821 @@
+/*
+ * Device Tree Source for Keystone 2 clock tree
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+clocks {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	refclkmain: refclkmain {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <122880000>;
+		clock-output-names = "refclk-main";
+	};
+
+	mainpllclk: mainpllclk@2310110 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,main-pll-clock";
+		clocks = <&refclkmain>;
+		reg = <0x02620350 4>, <0x02310110 4>;
+		reg-names = "control", "multiplier";
+		fixed-postdiv = <2>;
+	};
+
+	papllclk: papllclk@2620358 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkmain>;
+		clock-output-names = "pa-pll-clk";
+		reg = <0x02620358 4>;
+		reg-names = "control";
+		fixed-postdiv = <6>;
+	};
+
+	ddr3allclk: ddr3apllclk@2620360 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkmain>;
+		clock-output-names = "ddr-3a-pll-clk";
+		reg = <0x02620360 4>;
+		reg-names = "control";
+		fixed-postdiv = <6>;
+	};
+
+	ddr3bllclk: ddr3bpllclk@2620368 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkmain>;
+		clock-output-names = "ddr-3b-pll-clk";
+		reg = <0x02620368 4>;
+		reg-names = "control";
+		fixed-postdiv = <6>;
+	};
+
+	armpllclk: armpllclk@2620370 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkmain>;
+		clock-output-names = "arm-pll-clk";
+		reg = <0x02620370 4>;
+		reg-names = "control";
+		fixed-postdiv = <6>;
+	};
+
+	mainmuxclk: mainmuxclk@2310108 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-mux-clock";
+		clocks = <&mainpllclk>, <&refclkmain>;
+		reg = <0x02310108 4>;
+		bit-shift = <23>;
+		bit-mask = <1>;
+		clock-output-names = "mainmuxclk";
+	};
+
+	chipclk1: chipclk1 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&mainmuxclk>;
+		clock-div = <1>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1";
+	};
+
+	chipclk1rstiso: chipclk1rstiso {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&mainmuxclk>;
+		clock-div = <1>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso";
+	};
+
+	gemtraceclk: gemtraceclk@2310120 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-divider-clock";
+		clocks = <&mainmuxclk>;
+		reg = <0x02310120 4>;
+		bit-shift = <0>;
+		bit-mask = <8>;
+		clock-output-names = "gemtraceclk";
+	};
+
+	chipstmxptclk: chipstmxptclk {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-divider-clock";
+		clocks = <&mainmuxclk>;
+		reg = <0x02310164 4>;
+		bit-shift = <0>;
+		bit-mask = <8>;
+		clock-output-names = "chipstmxptclk";
+	};
+
+	chipclk12: chipclk12 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk12";
+	};
+
+	chipclk13: chipclk13 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <3>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk13";
+	};
+
+	chipclk14: chipclk14 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <4>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk14";
+	};
+
+	chipclk16: chipclk16 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <6>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk16";
+	};
+
+	chipclk112: chipclk112 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <12>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk112";
+	};
+
+	chipclk124: chipclk124 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <24>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk114";
+	};
+
+	chipclk1rstiso13: chipclk1rstiso13 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1rstiso>;
+		clock-div = <3>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso13";
+	};
+
+	chipclk1rstiso14: chipclk1rstiso14 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1rstiso>;
+		clock-div = <4>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso14";
+	};
+
+	chipclk1rstiso16: chipclk1rstiso16 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1rstiso>;
+		clock-div = <6>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso16";
+	};
+
+	chipclk1rstiso112: chipclk1rstiso112 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1rstiso>;
+		clock-div = <12>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso112";
+	};
+
+	clkmodrst0: clkmodrst0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "modrst0";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+
+	clkusb: clkusb {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "usb";
+		reg = <0x02350008 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkaemifspi: clkaemifspi {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "aemif-spi";
+		reg = <0x0235000c 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+
+	clkdebugsstrc: clkdebugsstrc {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "debugss-trc";
+		reg = <0x02350014 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clktetbtrc: clktetbtrc {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tetb-trc";
+		reg = <0x02350018 0xb00>, <0x02350004 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <1>;
+	};
+
+	clkpa: clkpa {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "pa";
+		reg = <0x0235001c 0xb00>, <0x02350008 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <2>;
+	};
+
+	clkcpgmac: clkcpgmac {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkpa>;
+		clock-output-names = "cpgmac";
+		reg = <0x02350020 0xb00>, <0x02350008 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <2>;
+	};
+
+	clksa: clksa {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkpa>;
+		clock-output-names = "sa";
+		reg = <0x02350024 0xb00>, <0x02350008 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <2>;
+	};
+
+	clkpcie: clkpcie {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "pcie";
+		reg = <0x02350028 0xb00>, <0x0235000c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <3>;
+	};
+
+	clksrio: clksrio {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1rstiso13>;
+		clock-output-names = "srio";
+		reg = <0x0235002c 0xb00>, <0x02350010 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <4>;
+	};
+
+	clkhyperlink0: clkhyperlink0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "hyperlink-0";
+		reg = <0x02350030 0xb00>, <0x02350014 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <5>;
+	};
+
+	clksr: clksr {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1rstiso112>;
+		clock-output-names = "sr";
+		reg = <0x02350034 0xb00>, <0x02350018 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <6>;
+	};
+
+	clkmsmcsram: clkmsmcsram {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "msmcsram";
+		reg = <0x02350038 0xb00>, <0x0235001c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <7>;
+	};
+
+	clkgem0: clkgem0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem0";
+		reg = <0x0235003c 0xb00>, <0x02350020 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <8>;
+	};
+
+	clkgem1: clkgem1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem1";
+		reg = <0x02350040 0xb00>, <0x02350024 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <9>;
+	};
+
+	clkgem2: clkgem2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem2";
+		reg = <0x02350044 0xb00>, <0x02350028 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <10>;
+	};
+
+	clkgem3: clkgem3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem3";
+		reg = <0x02350048 0xb00>, <0x0235002c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <11>;
+	};
+
+	clkgem4: clkgem4 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem4";
+		reg = <0x0235004c 0xb00>, <0x02350030 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <12>;
+	};
+
+	clkgem5: clkgem5 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem5";
+		reg = <0x02350050 0xb00>, <0x02350034 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <13>;
+	};
+
+	clkgem6: clkgem6 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem6";
+		reg = <0x02350054 0xb00>, <0x02350038 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <14>;
+	};
+
+	clkgem7: clkgem7 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem7";
+		reg = <0x02350058 0xb00>, <0x0235003c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <15>;
+	};
+
+	clkddr30: clkddr30 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "ddr3-0";
+		reg = <0x0235005c 0xb00>, <0x02350040 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <16>;
+	};
+
+	clkddr31: clkddr31 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "ddr3-1";
+		reg = <0x02350060 0xb00>, <0x02350040 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <16>;
+	};
+
+	clktac: clktac {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tac";
+		reg = <0x02350064 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <17>;
+	};
+
+	clkrac01: clktac01 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "rac-01";
+		reg = <0x02350068 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <17>;
+	};
+
+	clkrac23: clktac23 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "rac-23";
+		reg = <0x0235006c 0xb00>, <0x02350048 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <18>;
+	};
+
+	clkfftc0: clkfftc0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-0";
+		reg = <0x02350070 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <19>;
+	};
+
+	clkfftc1: clkfftc1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-1";
+		reg = <0x02350074 0xb00>, <0x023504c0 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <19>;
+	};
+
+	clkfftc2: clkfftc2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-2";
+		reg = <0x02350078 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkfftc3: clkfftc3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-3";
+		reg = <0x0235007c 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkfftc4: clkfftc4 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-4";
+		reg = <0x02350080 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkfftc5: clkfftc5 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-5";
+		reg = <0x02350084 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkaif: clkaif {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "aif";
+		reg = <0x02350088 0xb00>, <0x02350054 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <21>;
+	};
+
+	clktcp3d0: clktcp3d0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-0";
+		reg = <0x0235008c 0xb00>, <0x02350058 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <22>;
+	};
+
+	clktcp3d1: clktcp3d1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-1";
+		reg = <0x02350090 0xb00>, <0x02350058 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <22>;
+	};
+
+	clktcp3d2: clktcp3d2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-2";
+		reg = <0x02350094 0xb00>, <0x0235005c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <23>;
+	};
+
+	clktcp3d3: clktcp3d3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-3";
+		reg = <0x02350098 0xb00>, <0x0235005c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <23>;
+	};
+
+	clkvcp0: clkvcp0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-0";
+		reg = <0x0235009c 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp1: clkvcp1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-1";
+		reg = <0x023500a0 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp2: clkvcp2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-2";
+		reg = <0x023500a4 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp3: clkvcp3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-3";
+		reg = <0x0235000a8 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp4: clkvcp4 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-4";
+		reg = <0x023500ac 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkvcp5: clkvcp5 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-5";
+		reg = <0x023500b0 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkvcp6: clkvcp6 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-6";
+		reg = <0x023500b4 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkvcp7: clkvcp7 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-7";
+		reg = <0x023500b8 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkbcp: clkbcp {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "bcp";
+		reg = <0x023500bc 0xb00>, <0x02350068 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <26>;
+	};
+
+	clkdxb: clkdxb {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "dxb";
+		reg = <0x023500c0 0xb00>, <0x0235006c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <27>;
+	};
+
+	clkhyperlink1: clkhyperlink1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "hyperlink-1";
+		reg = <0x023500c4 0xb00>, <0x02350070 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <28>;
+	};
+
+	clkxge: clkxge {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "xge";
+		reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <29>;
+	};
+
+	clkwdtimer0: clkwdtimer0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer0";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkwdtimer1: clkwdtimer1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer1";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkwdtimer2: clkwdtimer2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer2";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkwdtimer3: clkwdtimer3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer3";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkuart0: clkuart0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "uart0";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkuart1: clkuart1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "uart1";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkaemif: clkaemif {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkaemifspi>;
+		clock-output-names = "aemif";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkusim: clkusim {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "usim";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clki2c: clki2c {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "i2c";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkspi: clkspi {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkaemifspi>;
+		clock-output-names = "spi";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkgpio: clkgpio {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "gpio";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkkeymgr: clkkeymgr {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "keymgr";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/keystone.dts b/arch/arm/boot/dts/keystone.dts
index 1334b42..100bdf5 100644
--- a/arch/arm/boot/dts/keystone.dts
+++ b/arch/arm/boot/dts/keystone.dts
@@ -7,7 +7,9 @@
  */
 
 /dts-v1/;
-/include/ "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
 
 / {
 	model = "Texas Instruments Keystone 2 SoC";
@@ -67,18 +69,23 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0x308>;
+		interrupts =
+			<GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	pmu {
 		compatible = "arm,cortex-a15-pmu";
-		interrupts = <0 20 0xf01>,
-			     <0 21 0xf01>,
-			     <0 22 0xf01>,
-			     <0 23 0xf01>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>;
 	};
 
 	soc {
@@ -93,14 +100,16 @@
 			reg = <0x023100e8 4>;	/* pll reset control reg */
 		};
 
+		/include/ "keystone-clocks.dtsi"
+
 		uart0: serial@02530c00 {
 			compatible = "ns16550a";
 			current-speed = <115200>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			reg = <0x02530c00 0x100>;
-			clock-frequency = <133120000>;
-			interrupts = <0 277 0xf01>;
+			clocks	= <&clkuart0>;
+			interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		uart1:	serial@02531000 {
@@ -109,9 +118,66 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			reg = <0x02531000 0x100>;
-			clock-frequency = <133120000>;
-			interrupts = <0 280 0xf01>;
+			clocks	= <&clkuart1>;
+			interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		i2c0: i2c@2530000 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x02530000 0x400>;
+			clock-frequency = <100000>;
+			clocks = <&clki2c>;
+			interrupts = <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dtt@50 {
+				compatible = "at,24c1024";
+				reg = <0x50>;
+			};
 		};
 
+		i2c1: i2c@2530400 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x02530400 0x400>;
+			clock-frequency = <100000>;
+			clocks = <&clki2c>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		i2c2: i2c@2530800 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x02530800 0x400>;
+			clock-frequency = <100000>;
+			clocks = <&clki2c>;
+			interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		spi0: spi@21000400 {
+			compatible = "ti,dm6441-spi";
+			reg = <0x21000400 0x200>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <0>;
+			interrupts = <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkspi>;
+		};
+
+		spi1: spi@21000600 {
+			compatible = "ti,dm6441-spi";
+			reg = <0x21000600 0x200>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <0>;
+			interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkspi>;
+		};
+
+		spi2: spi@21000800 {
+			compatible = "ti,dm6441-spi";
+			reg = <0x21000800 0x200>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <0>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkspi>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi
index 1e5bef0..650ef30 100644
--- a/arch/arm/boot/dts/kirkwood-6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6281.dtsi
@@ -1,4 +1,39 @@
 / {
+	mbus {
+		pcie-controller {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 9>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+			};
+		};
+	};
+
 	ocp@f1000000 {
 		pinctrl: pinctrl@10000 {
 			compatible = "marvell,88f6281-pinctrl";
@@ -41,37 +76,6 @@
 			};
 		};
 
-		pcie-controller {
-			compatible = "marvell,kirkwood-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			bus-range = <0x00 0xff>;
-
-			ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000   /* Port 0.0 registers */
-				  0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
-			          0x81000000 0 0          0xe8000000 0 0x00100000>; /* downstream I/O */
-
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gate_clk 2>;
-				status = "disabled";
-			};
-		};
-
 		rtc@10300 {
 			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
 			reg = <0x10300 0x20>;
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index a63a111..3933a33 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -1,4 +1,59 @@
 / {
+	mbus {
+		pcie-controller {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+			        0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0       1 0 /* Port 1.0 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0       1 0 /* Port 1.0 IO  */>;
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 9>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+			};
+
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 10>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 18>;
+				status = "disabled";
+			};
+		};
+	};
 	ocp@f1000000 {
 
 		pinctrl: pinctrl@10000 {
@@ -94,52 +149,5 @@
 			status = "disabled";
 		};
 
-		pcie-controller {
-			compatible = "marvell,kirkwood-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			bus-range = <0x00 0xff>;
-
-			ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000   /* Port 0.0 registers */
-			          0x82000000 0 0x00044000 0x00044000 0 0x00002000   /* Port 1.0 registers */
-				  0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
-			          0x81000000 0 0          0xe8000000 0 0x00100000>; /* downstream I/O */
-
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gate_clk 2>;
-				status = "disabled";
-			};
-
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 10>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gate_clk 18>;
-				status = "disabled";
-			};
-		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts
index 00c48d2..142b9cd 100644
--- a/arch/arm/boot/dts/kirkwood-cloudbox.dts
+++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts
@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "LaCie CloudBox";
@@ -89,3 +89,19 @@
 		gpios = <&gpio0 17 0>;
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/kirkwood-db-88f6281.dts
index 9d777ed..c39dd76 100644
--- a/arch/arm/boot/dts/kirkwood-db-88f6281.dts
+++ b/arch/arm/boot/dts/kirkwood-db-88f6281.dts
@@ -11,14 +11,14 @@
 
 /dts-v1/;
 
-/include/ "kirkwood-db.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood-db.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "Marvell DB-88F6281-BP Development Board";
 	compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
-	ocp@f1000000 {
+	mbus {
 		pcie-controller {
 			status = "okay";
 
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6282.dts b/arch/arm/boot/dts/kirkwood-db-88f6282.dts
index f4c8528..701c6b6 100644
--- a/arch/arm/boot/dts/kirkwood-db-88f6282.dts
+++ b/arch/arm/boot/dts/kirkwood-db-88f6282.dts
@@ -11,14 +11,14 @@
 
 /dts-v1/;
 
-/include/ "kirkwood-db.dtsi"
-/include/ "kirkwood-6282.dtsi"
+#include "kirkwood-db.dtsi"
+#include "kirkwood-6282.dtsi"
 
 / {
 	model = "Marvell DB-88F6282-BP Development Board";
 	compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood";
 
-	ocp@f1000000 {
+	mbus {
 		pcie-controller {
 			status = "okay";
 
diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/kirkwood-db.dtsi
index c87cfb8..053aa20 100644
--- a/arch/arm/boot/dts/kirkwood-db.dtsi
+++ b/arch/arm/boot/dts/kirkwood-db.dtsi
@@ -12,7 +12,7 @@
  * and 6282 variants of the Marvell Kirkwood Development Board.
  */
 
-/include/ "kirkwood.dtsi"
+#include "kirkwood.dtsi"
 
 / {
 	memory {
@@ -39,28 +39,6 @@
 			status = "ok";
 		};
 
-		nand@3000000 {
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-			chip-delay = <25>;
-			status = "okay";
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x0 0x100000>;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x100000 0x400000>;
-			};
-
-			partition@500000 {
-				label = "root";
-				reg = <0x500000 0x1fb00000>;
-			};
-		};
-
 		sata@80000 {
 			nr-ports = <2>;
 			status = "okay";
@@ -77,13 +55,43 @@
 			cd-gpios = <&gpio1 6 0>;
 			status = "okay";
 		};
+	};
+};
 
-		pcie-controller {
-			status = "okay";
+&nand {
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+	chip-delay = <25>;
+	status = "okay";
 
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
+	partition@0 {
+		label = "uboot";
+		reg = <0x0 0x100000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "root";
+		reg = <0x500000 0x1fb00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts
index 14d4cee..e112ca6 100644
--- a/arch/arm/boot/dts/kirkwood-dns320.dts
+++ b/arch/arm/boot/dts/kirkwood-dns320.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood-dnskw.dtsi"
+#include "kirkwood-dnskw.dtsi"
 
 / {
 	model = "D-Link DNS-320 NAS (Rev A1)";
diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts
index 6387257..5119fb8 100644
--- a/arch/arm/boot/dts/kirkwood-dns325.dts
+++ b/arch/arm/boot/dts/kirkwood-dns325.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood-dnskw.dtsi"
+#include "kirkwood-dnskw.dtsi"
 
 / {
 	model = "D-Link DNS-325 NAS (Rev A1)";
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
index 0afe1d0..aefa375 100644
--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
@@ -1,5 +1,5 @@
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "D-Link DNS NASes (kirkwood-based)";
@@ -148,44 +148,6 @@
 			status = "okay";
 			nr-ports = <2>;
 		};
-
-		nand@3000000 {
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-			status = "okay";
-			chip-delay = <35>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x500000>;
-			};
-
-			partition@600000 {
-				label = "ramdisk";
-				reg = <0x0600000 0x500000>;
-			};
-
-			partition@b00000 {
-				label = "image";
-				reg = <0x0b00000 0x6600000>;
-			};
-
-			partition@7100000 {
-				label = "mini firmware";
-				reg = <0x7100000 0xa00000>;
-			};
-
-			partition@7b00000 {
-				label = "config";
-				reg = <0x7b00000 0x500000>;
-			};
-		};
 	};
 
 	regulators {
@@ -219,3 +181,57 @@
 		};
 	};
 };
+
+&nand {
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+	status = "okay";
+	chip-delay = <35>;
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x500000>;
+	};
+
+	partition@600000 {
+		label = "ramdisk";
+		reg = <0x0600000 0x500000>;
+	};
+
+	partition@b00000 {
+		label = "image";
+		reg = <0x0b00000 0x6600000>;
+	};
+
+	partition@7100000 {
+		label = "mini firmware";
+		reg = <0x7100000 0xa00000>;
+	};
+
+	partition@7b00000 {
+		label = "config";
+		reg = <0x7b00000 0x500000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts
index 7714742..33ff368 100644
--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "Seagate FreeAgent Dockstar";
@@ -34,26 +34,6 @@
 		serial@12000 {
 			status = "ok";
 		};
-
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x400000>;
-			};
-
-			partition@500000 {
-				label = "data";
-				reg = <0x0500000 0xfb00000>;
-			};
-		};
 	};
 	gpio-leds {
 		compatible = "gpio-leds";
@@ -90,3 +70,40 @@
 		};
 	};
 };
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "data";
+		reg = <0x0500000 0xfb00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		compatible = "marvell,88e1116";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
index 36c7ba3..6f62af9 100644
--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "Globalscale Technologies Dreamplug";
@@ -99,3 +99,31 @@
 		};
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts
index 31caa64..a43bebb 100644
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "Seagate GoFlex Net";
@@ -67,31 +67,6 @@
 			status = "ok";
 		};
 
-		nand@3000000 {
-			chip-delay = <40>;
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x400000>;
-			};
-
-			partition@500000 {
-				label = "pogoplug";
-				reg = <0x0500000 0x2000000>;
-			};
-
-			partition@2500000 {
-				label = "root";
-				reg = <0x02500000 0xd800000>;
-			};
-		};
 		sata@80000 {
 			status = "okay";
 			nr-ports = <2>;
@@ -170,3 +145,45 @@
 		};
 	};
 };
+
+&nand {
+	chip-delay = <40>;
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "pogoplug";
+		reg = <0x0500000 0x2000000>;
+	};
+
+	partition@2500000 {
+		label = "root";
+		reg = <0x02500000 0xd800000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
index 1e642f3..d30a91a 100644
--- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
+++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "Globalscale Technologies Guruplug Server Plus";
@@ -40,26 +40,6 @@
 			status = "ok";
 		};
 
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x00000000 0x00100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x00100000 0x00400000>;
-			};
-
-			partition@500000 {
-				label = "data";
-				reg = <0x00500000 0x1fb00000>;
-			};
-		};
-
 		sata@80000 {
 			status = "okay";
 			nr-ports = <1>;
@@ -96,3 +76,53 @@
 		};
 	};
 };
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x00000000 0x00100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x00100000 0x00400000>;
+	};
+
+	partition@500000 {
+		label = "data";
+		reg = <0x00500000 0x1fb00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		compatible = "marvell,88e1121";
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+		compatible = "marvell,88e1121";
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
index 20c4b08..c5fb02f 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -1,11 +1,11 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
-	compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0",  "marvell,kirkwood-88f6281", "marvell,kirkwood";
+	compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
 	memory {
 		device_type = "memory";
@@ -43,6 +43,7 @@
 				marvell,function = "gpio";
 			};
 		};
+
 		serial@12000 {
 			status = "okay";
 		};
@@ -51,28 +52,6 @@
 			status = "okay";
 			nr-ports = <2>;
 		};
-
-		nand@3000000 {
-			status = "okay";
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x600000>;
-			};
-
-			partition@700000 {
-				label = "root";
-				reg = <0x0700000 0xf900000>;
-			};
-
-		};
 	};
 
 	gpio_keys {
@@ -93,6 +72,7 @@
 			gpios = <&gpio0 28 1>;
 		};
 	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
 		pinctrl-0 = <&pmx_led_os_red &pmx_led_os_green
@@ -113,12 +93,55 @@
 			gpios = <&gpio0 27 0>;
 		};
 	};
+
 	gpio_poweroff {
 		compatible = "gpio-poweroff";
 		pinctrl-0 = <&pmx_power_off>;
 		pinctrl-names = "default";
 		gpios = <&gpio0 24 0>;
 	};
+};
+
+&nand {
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0xe0000>;
+	};
+
+	partition@e0000 {
+		label = "u-boot environment";
+		reg = <0xe0000 0x100000>;
+	};
 
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x600000>;
+	};
+
+	partition@700000 {
+		label = "root";
+		reg = <0x0700000 0xf900000>;
+	};
 
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index 441204e..4a62b20 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "Iomega Iconnect";
@@ -18,6 +18,16 @@
 		linux,initrd-end   = <0x4800000>;
 	};
 
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
 	ocp@f1000000 {
 		pinctrl: pinctrl@10000 {
 			pmx_button_reset: pmx-button-reset {
@@ -72,43 +82,6 @@
 		serial@12000 {
 			status = "ok";
 		};
-
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x0000000 0xc0000>;
-			};
-
-			partition@a0000 {
-				label = "env";
-				reg = <0xa0000 0x20000>;
-			};
-
-			partition@100000 {
-				label = "zImage";
-				reg = <0x100000 0x300000>;
-			};
-
-			partition@540000 {
-				label = "initrd";
-				reg = <0x540000 0x300000>;
-			};
-
-			partition@980000 {
-				label = "boot";
-				reg = <0x980000 0x1f400000>;
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
 	};
 
 	gpio-leds {
@@ -176,3 +149,48 @@
 		};
 	};
 };
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0xc0000>;
+	};
+
+	partition@a0000 {
+		label = "env";
+		reg = <0xa0000 0x20000>;
+	};
+
+	partition@100000 {
+		label = "zImage";
+		reg = <0x100000 0x300000>;
+	};
+
+	partition@540000 {
+		label = "initrd";
+		reg = <0x540000 0x300000>;
+	};
+
+	partition@980000 {
+		label = "boot";
+		reg = <0x980000 0x1f400000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@11 {
+		device_type = "ethernet-phy";
+		reg = <11>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
index 00a7bfe..d15395d 100644
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "Iomega StorCenter ix2-200";
@@ -113,31 +113,6 @@
 			status = "ok";
 		};
 
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-				read-only;
-			};
-
-			partition@a0000 {
-				label = "env";
-				reg = <0xa0000 0x20000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x100000 0x300000>;
-			};
-
-			partition@400000 {
-				label = "uInitrd";
-				reg = <0x540000 0x1000000>;
-			};
-		};
 		sata@80000 {
 			status = "okay";
 			nr-ports = <2>;
@@ -194,3 +169,53 @@
 		};
 	};
 };
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@a0000 {
+		label = "env";
+		reg = <0xa0000 0x20000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x100000 0x300000>;
+	};
+
+	partition@400000 {
+		label = "uInitrd";
+		reg = <0x540000 0x1000000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy1: ethernet-phy@11 {
+		device_type = "ethernet-phy";
+		reg = <11>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts
index c3f036b..da674bb 100644
--- a/arch/arm/boot/dts/kirkwood-is2.dts
+++ b/arch/arm/boot/dts/kirkwood-is2.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood-ns2-common.dtsi"
+#include "kirkwood-ns2-common.dtsi"
 
 / {
 	model = "LaCie Internet Space v2";
@@ -30,3 +30,5 @@
 		};
 	};
 };
+
+&ethphy0 { reg = <8>; };
diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
index 5d9f5ea..cd44f37 100644
--- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
+++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-98dx4122.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-98dx4122.dtsi"
 
 / {
 	model = "Keymile Kirkwood Reference Design";
@@ -34,13 +34,6 @@
 		serial@12000 {
 			status = "ok";
 		};
-
-		nand@3000000 {
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-			status = "ok";
-			chip-delay = <25>;
-		};
 	};
 
 	i2c@0 {
@@ -50,3 +43,26 @@
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 	};
 };
+
+&nand {
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+	status = "ok";
+	chip-delay = <25>;
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-lschlv2.dts b/arch/arm/boot/dts/kirkwood-lschlv2.dts
index 9f55d95..e2fa368 100644
--- a/arch/arm/boot/dts/kirkwood-lschlv2.dts
+++ b/arch/arm/boot/dts/kirkwood-lschlv2.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood-lsxl.dtsi"
+#include "kirkwood-lsxl.dtsi"
 
 / {
 	model = "Buffalo Linkstation LS-CHLv2";
diff --git a/arch/arm/boot/dts/kirkwood-lsxhl.dts b/arch/arm/boot/dts/kirkwood-lsxhl.dts
index 5c84c11..8d89cdf 100644
--- a/arch/arm/boot/dts/kirkwood-lsxhl.dts
+++ b/arch/arm/boot/dts/kirkwood-lsxhl.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood-lsxl.dtsi"
+#include "kirkwood-lsxl.dtsi"
 
 / {
 	model = "Buffalo Linkstation LS-XHL";
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
index 31b17f5..4e8f9e4 100644
--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -1,5 +1,5 @@
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	chosen {
@@ -207,3 +207,31 @@
 		};
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@8 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts
index 6179333..6c1ec27 100644
--- a/arch/arm/boot/dts/kirkwood-mplcec4.dts
+++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts
@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "MPL CEC4";
@@ -16,6 +16,16 @@
                 bootargs = "console=ttyS0,115200n8 earlyprintk";
         };
 
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
 	ocp@f1000000 {
 		pinctrl: pinctrl@10000 {
 			pmx_led_health: pmx-led-health {
@@ -85,37 +95,6 @@
                         pinctrl-names = "default";
                 };
 
-                nand@3000000 {
-                        pinctrl-0 = <&pmx_nand>;
-                        pinctrl-names = "default";
-                        status = "okay";
-
-                        partition@0 {
-                                label = "uboot";
-                                reg = <0x0000000 0x100000>;
-                        };
-
-                        partition@100000 {
-                                label = "env";
-                                reg = <0x100000 0x80000>;
-                        };
-
-                        partition@180000 {
-                                label = "fdt";
-                                reg = <0x180000 0x80000>;
-                        };
-
-                        partition@200000 {
-                                label = "kernel";
-                                reg = <0x200000 0x400000>;
-                        };
-
-                        partition@600000 {
-                                label = "rootfs";
-                                reg = <0x600000 0x1fa00000>;
-                        };
-                };
-
 		rtc@10300 {
 			status = "disabled";
 		};
@@ -134,14 +113,6 @@
 			cd-gpios = <&gpio1 15 1>;
 			/* No WP GPIO */
 		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
 	};
 
 	gpio-leds {
@@ -191,3 +162,61 @@
 	};
 };
 
+&nand {
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x100000>;
+	};
+
+	partition@100000 {
+		label = "env";
+		reg = <0x100000 0x80000>;
+	};
+
+	partition@180000 {
+		label = "fdt";
+		reg = <0x180000 0x80000>;
+	};
+
+	partition@200000 {
+		label = "kernel";
+		reg = <0x200000 0x400000>;
+	};
+
+	partition@600000 {
+		label = "rootfs";
+		reg = <0x600000 0x1fa00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+		reg = <1>;
+	};
+
+	ethphy1: ethernet-phy@2 {
+		device_type = "ethernet-phy";
+		reg = <2>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
new file mode 100644
index 0000000..6317e1d
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -0,0 +1,125 @@
+/*
+ * Marvell 88F6281 GTW GE Board
+ *
+ * Lennert Buytenhek <buytenh@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are common between the 6281
+ * and 6282 variants of the Marvell Kirkwood Development Board.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Marvell 88F6281 GTW GE Board";
+	compatible = "marvell,mv88f6281gtw-ge", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		pinctrl@10000 {
+			pmx_usb_led: pmx-usb-led {
+				marvell,pins = "mpp12";
+				marvell,function = "gpo";
+			};
+
+			pmx_leds: pmx-leds {
+				marvell,pins = "mpp20", "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_keys: pmx-keys {
+				marvell,pins = "mpp46", "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+
+		spi@10600 {
+			pinctrl-0 = <&pmx_spi>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mx25l12805d";
+				reg = <0>;
+				spi-max-frequency = <50000000>;
+				mode = <0>;
+			};
+		};
+
+		serial@12000 {
+			pinctrl-0 = <&pmx_uart0>;
+			pinctrl-names = "default";
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		ehci@50000 {
+			status = "okay";
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds &pmx_usb_led>;
+		pinctrl-names = "default";
+
+		green-status {
+			label = "gtw:green:Status";
+			gpios = <&gpio0 20 0>;
+		};
+
+		red-status {
+			label = "gtw:red:Status";
+			gpios = <&gpio0 21 0>;
+		};
+
+		green-usb {
+			label = "gtw:green:USB";
+			gpios = <&gpio0 12 0>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_keys>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "SWR Button";
+			linux,code = <0x198>; /* KEY_RESTART */
+			gpios = <&gpio1 15 1>;
+		};
+		button@2 {
+			label = "WPS Button";
+			linux,code = <0x211>; /* KEY_WPS_BUTTON */
+			gpios = <&gpio1 14 1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
index ad6ade7..e6a102c 100644
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6282.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
 
 / {
 	model = "NETGEAR ReadyNAS Duo v2";
@@ -16,6 +16,16 @@
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
 	};
 
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
 	ocp@f1000000 {
 		pinctrl: pinctrl@10000 {
 			pmx_button_power: pmx-button-power {
@@ -52,6 +62,17 @@
 			};
 		};
 
+		clocks {
+		       #address-cells = <1>;
+		       #size-cells = <0>;
+
+		       g762_clk: fixedclk {
+				 compatible = "fixed-clock";
+				 #clock-cells = <0>;
+				 clock-frequency = <8192>;
+		       };
+		};
+
 		i2c@11000 {
 			status = "okay";
 
@@ -59,6 +80,15 @@
 				compatible = "ricoh,rs5c372a";
 				reg = <0x32>;
 			};
+
+			g762: g762@3e {
+				compatible = "gmt,g762";
+				reg = <0x3e>;
+				clocks = <&g762_clk>; /* input clock */
+				fan_gear_mode = <0>;
+				fan_startv = <1>;
+				pwm_polarity = <0>;
+			};
 		};
 
 		serial@12000 {
@@ -67,48 +97,10 @@
 			status = "okay";
 		};
 
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x180000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "u-boot-env";
-				reg = <0x180000 0x20000>;
-			};
-
-			partition@200000 {
-				label = "uImage";
-				reg = <0x0200000 0x600000>;
-			};
-
-			partition@800000 {
-				label = "minirootfs";
-				reg = <0x0800000 0x1000000>;
-			};
-
-			partition@1800000 {
-				label = "jffs2";
-				reg = <0x1800000 0x6800000>;
-			};
-		};
-
 		sata@80000 {
 			status = "okay";
 			nr-ports = <2>;
 		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
 	};
 
 	gpio-leds {
@@ -184,3 +176,49 @@
                 };
         };
 };
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x180000>;
+		read-only;
+	};
+
+	partition@180000 {
+		label = "u-boot-env";
+		reg = <0x180000 0x20000>;
+	};
+
+	partition@200000 {
+		label = "uImage";
+		reg = <0x0200000 0x600000>;
+	};
+
+	partition@800000 {
+		label = "minirootfs";
+		reg = <0x0800000 0x1000000>;
+	};
+
+	partition@1800000 {
+		label = "jffs2";
+		reg = <0x1800000 0x6800000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
index 2afac04..2fcb82e 100644
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
@@ -1,5 +1,5 @@
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	chosen {
@@ -84,3 +84,19 @@
 	};
 
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy {
+		device_type = "ethernet-phy";
+                /* overwrite reg property in board file */
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts
index b50e93d..53368d1 100644
--- a/arch/arm/boot/dts/kirkwood-ns2.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood-ns2-common.dtsi"
+#include "kirkwood-ns2-common.dtsi"
 
 / {
 	model = "LaCie Network Space v2";
@@ -30,3 +30,5 @@
 		};
 	};
 };
+
+&ethphy0 { reg = <8>; };
diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts
index af8259f..2796070 100644
--- a/arch/arm/boot/dts/kirkwood-ns2lite.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood-ns2-common.dtsi"
+#include "kirkwood-ns2-common.dtsi"
 
 / {
 	model = "LaCie Network Space Lite v2";
@@ -30,3 +30,5 @@
 		};
 	};
 };
+
+&ethphy0 { reg = <0>; };
diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts
index 85f24d2..defdc77 100644
--- a/arch/arm/boot/dts/kirkwood-ns2max.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2max.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood-ns2-common.dtsi"
+#include "kirkwood-ns2-common.dtsi"
 
 / {
 	model = "LaCie Network Space Max v2";
@@ -49,3 +49,5 @@
 		};
 	};
 };
+
+&ethphy0 { reg = <8>; };
diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts
index 329e530..adbafdd 100644
--- a/arch/arm/boot/dts/kirkwood-ns2mini.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood-ns2-common.dtsi"
+#include "kirkwood-ns2-common.dtsi"
 
 / {
 	/* This machine is embedded in the first LaCie CloudBox product. */
@@ -50,3 +50,5 @@
 		};
 	};
 };
+
+&ethphy0 { reg = <0>; };
diff --git a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
new file mode 100644
index 0000000..e3f915d
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
@@ -0,0 +1,107 @@
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "ZyXEL NSA310";
+
+	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pmx_usb_power_off: pmx-usb-power-off {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+			pmx_pwr_off: pmx-pwr-off {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+
+		};
+
+		serial@12000 {
+			status = "ok";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_pwr_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 16 0>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power_off>;
+		pinctrl-names = "default";
+
+		usb0_power_off: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power Off";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 21 0>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <35>;
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x0100000>;
+		read-only;
+	};
+	partition@100000 {
+		label = "uboot_env";
+		reg = <0x0100000 0x0080000>;
+	};
+	partition@180000 {
+		label = "key_store";
+		reg = <0x0180000 0x0080000>;
+	};
+	partition@200000 {
+		label = "info";
+		reg = <0x0200000 0x0080000>;
+	};
+	partition@280000 {
+		label = "etc";
+		reg = <0x0280000 0x0a00000>;
+	};
+	partition@c80000 {
+		label = "kernel_1";
+		reg = <0x0c80000 0x0a00000>;
+	};
+	partition@1680000 {
+		label = "rootfs1";
+		reg = <0x1680000 0x2fc0000>;
+	};
+	partition@4640000 {
+		label = "kernel_2";
+		reg = <0x4640000 0x0a00000>;
+	};
+	partition@5040000 {
+		label = "rootfs2";
+		reg = <0x5040000 0x2fc0000>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts
index 6900359..b5418bc 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa310.dts
@@ -1,10 +1,8 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood-nsa310-common.dtsi"
 
 / {
-	model = "ZyXEL NSA310";
 	compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
 	memory {
@@ -16,6 +14,16 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
 	ocp@f1000000 {
 		pinctrl: pinctrl@10000 {
 			pinctrl-0 = <&pmx_unknown>;
@@ -41,11 +49,6 @@
 				marvell,function = "gpio";
 			};
 
-			pmx_usb_power_off: pmx-usb-power-off {
-				marvell,pins = "mpp21";
-				marvell,function = "gpio";
-			};
-
 			pmx_led_sys_green: pmx-led-sys-green {
 				marvell,pins = "mpp28";
 				marvell,function = "gpio";
@@ -95,20 +98,6 @@
 				marvell,pins = "mpp46";
 				marvell,function = "gpio";
 			};
-
-			pmx_pwr_off: pmx-pwr-off {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "ok";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
 		};
 
 		i2c@11000 {
@@ -119,57 +108,6 @@
 				reg = <0x2e>;
 			};
 		};
-
-		nand@3000000 {
-			status = "okay";
-			chip-delay = <35>;
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x0000000 0x0100000>;
-				read-only;
-			};
-			partition@100000 {
-				label = "uboot_env";
-				reg = <0x0100000 0x0080000>;
-			};
-			partition@180000 {
-				label = "key_store";
-				reg = <0x0180000 0x0080000>;
-			};
-			partition@200000 {
-				label = "info";
-				reg = <0x0200000 0x0080000>;
-			};
-			partition@280000 {
-				label = "etc";
-				reg = <0x0280000 0x0a00000>;
-			};
-			partition@c80000 {
-				label = "kernel_1";
-				reg = <0x0c80000 0x0a00000>;
-			};
-			partition@1680000 {
-				label = "rootfs1";
-				reg = <0x1680000 0x2fc0000>;
-			};
-			partition@4640000 {
-				label = "kernel_2";
-				reg = <0x4640000 0x0a00000>;
-			};
-			partition@5040000 {
-				label = "rootfs2";
-				reg = <0x5040000 0x2fc0000>;
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
 	};
 
 	gpio_keys {
@@ -246,30 +184,4 @@
 			gpios = <&gpio1 8 0>;
 		};
 	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pmx_pwr_off>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 16 0>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_power_off>;
-		pinctrl-names = "default";
-
-		usb0_power_off: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power Off";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 21 0>;
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/kirkwood-nsa310a.dts
new file mode 100644
index 0000000..ab0212b
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa310a.dts
@@ -0,0 +1,165 @@
+/dts-v1/;
+
+#include "kirkwood-nsa310-common.dtsi"
+
+/*
+ * There are at least two different NSA310 designs. This variant does
+ * not have the red USB Led.
+ */
+
+/ {
+	compatible = "zyxel,nsa310a", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+			pinctrl-names = "default";
+
+			pmx_led_esata_green: pmx-led-esata-green {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_esata_red: pmx-led-esata-red {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_usb_green: pmx-led-usb-green {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_usb_power_off: pmx-usb-power-off {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_green: pmx-led-sys-green {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_red: pmx-led-sys-red {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_reset: pmx-btn-reset {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_copy: pmx-btn-copy {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_copy_green: pmx-led-copy-green {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_copy_red: pmx-led-copy-red {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd_green: pmx-led-hdd-green {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd_red: pmx-led-hdd-red {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_power: pmx-btn-power {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			lm85: lm85@2e {
+				compatible = "lm85";
+				reg = <0x2e>;
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			label = "Power Button";
+			linux,code = <116>;
+			gpios = <&gpio1 14 0>;
+		};
+		button@2 {
+			label = "Copy Button";
+			linux,code = <133>;
+			gpios = <&gpio1 5 1>;
+		};
+		button@3 {
+			label = "Reset Button";
+			linux,code = <0x198>;
+			gpios = <&gpio1 4 1>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		green-sys {
+			label = "nsa310:green:sys";
+			gpios = <&gpio0 28 0>;
+		};
+		red-sys {
+			label = "nsa310:red:sys";
+			gpios = <&gpio0 29 0>;
+		};
+		green-hdd {
+			label = "nsa310:green:hdd";
+			gpios = <&gpio1 9 0>;
+		};
+		red-hdd {
+			label = "nsa310:red:hdd";
+			gpios = <&gpio1 10 0>;
+		};
+		green-esata {
+			label = "nsa310:green:esata";
+			gpios = <&gpio0 12 0>;
+		};
+		red-esata {
+			label = "nsa310:red:esata";
+			gpios = <&gpio0 13 0>;
+		};
+		green-usb {
+			label = "nsa310:green:usb";
+			gpios = <&gpio0 15 0>;
+		};
+		green-copy {
+			label = "nsa310:green:copy";
+			gpios = <&gpio1 7 0>;
+		};
+		red-copy {
+			label = "nsa310:red:copy";
+			gpios = <&gpio1 8 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
index 38dc851..f0e3d21 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6282.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
 
 / {
 	model = "Plat'Home OpenBlocksA6";
@@ -29,43 +29,6 @@
 			pinctrl-names = "default";
 		};
 
-		nand@3000000 {
-			chip-delay = <25>;
-			status = "okay";
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x0 0x90000>;
-			};
-
-			partition@90000 {
-				label = "env";
-				reg = <0x90000 0x44000>;
-			};
-
-			partition@d4000 {
-				label = "test";
-				reg = <0xd4000 0x24000>;
-			};
-
-			partition@f4000 {
-				label = "conf";
-				reg = <0xf4000 0x400000>;
-			};
-
-			partition@4f4000 {
-				label = "linux";
-				reg = <0x4f4000 0x1d20000>;
-			};
-
-			partition@2214000 {
-				label = "user";
-				reg = <0x2214000 0x1dec000>;
-			};
-		};
-
 		sata@80000 {
 			nr-ports = <1>;
 			status = "okay";
@@ -166,3 +129,56 @@
 		};
 	};
 };
+
+&nand {
+	chip-delay = <25>;
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0 0x90000>;
+	};
+
+	partition@90000 {
+		label = "env";
+		reg = <0x90000 0x44000>;
+	};
+
+	partition@d4000 {
+		label = "test";
+		reg = <0xd4000 0x24000>;
+	};
+
+	partition@f4000 {
+		label = "conf";
+		reg = <0xf4000 0x400000>;
+	};
+
+	partition@4f4000 {
+		label = "linux";
+		reg = <0x4f4000 0x1d20000>;
+	};
+
+	partition@2214000 {
+		label = "user";
+		reg = <0x2214000 0x1dec000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
new file mode 100644
index 0000000..851fb2a
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
@@ -0,0 +1,223 @@
+/*
+ * Device Tree file for OpenBlocks A7 board
+ *
+ * Copyright (C) 2013 Free Electrons
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "Plat'Home OpenBlocksA7";
+	compatible = "plathome,openblocks-a7", "marvell,kirkwood-88f6283", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "ok";
+			pinctrl-0 = <&pmx_uart0>;
+			pinctrl-names = "default";
+		};
+
+		serial@12100 {
+			status = "ok";
+			pinctrl-0 = <&pmx_uart1>;
+			pinctrl-names = "default";
+		};
+
+		sata@80000 {
+			nr-ports = <1>;
+			status = "okay";
+		};
+
+		i2c@11100 {
+			status = "okay";
+			pinctrl-0 = <&pmx_twsi1>;
+			pinctrl-names = "default";
+
+			s24c02: s24c02@50 {
+				compatible = "24c02";
+				reg = <0x50>;
+			};
+		};
+
+		pinctrl: pinctrl@10000 {
+			pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>;
+			pinctrl-names = "default";
+
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp10", "mpp11", "mpp15",
+					"mpp16";
+				marvell,function = "uart0";
+			};
+
+			pmx_uart1: pmx-uart1 {
+				marvell,pins = "mpp13", "mpp14", "mpp8",
+					"mpp9";
+				marvell,function = "uart1";
+			};
+
+			pmx_sysrst: pmx-sysrst {
+				marvell,pins = "mpp6";
+				marvell,function = "sysrst";
+			};
+
+			pmx_dip_switches: pmx-dip-switches {
+				marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47";
+				marvell,function = "gpio";
+			};
+
+			/*
+			 * Accessible on connector J202. The MPP
+			 * listed below are pin 1-7, pin 8 is unused,
+			 * pin 9 is external reset input and pin 10 is
+			 * ground.
+			 */
+			pmx_gpio_header: pmx-gpio-header {
+				marvell,pins = "mpp17", "mpp7", "mpp29", "mpp28",
+					       "mpp35", "mpp34", "mpp40";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_init: pmx-init {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_usb_oc: pmx-usb-oc {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_leds: pmx-leds {
+				marvell,pins = "mpp41", "mpp42", "mpp43";
+				marvell,function = "gpio";
+			};
+
+			pmx_ge1: pmx-ge1 {
+				marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23",
+					       "mpp24", "mpp25", "mpp26", "mpp27",
+					       "mpp30", "mpp31", "mpp32", "mpp33";
+				marvell,function = "ge1";
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds>;
+		pinctrl-names = "default";
+
+		led-red {
+			label = "obsa7:red:stat";
+			gpios = <&gpio1 9 1>;
+		};
+
+		led-green {
+			label = "obsa7:green:stat";
+			gpios = <&gpio1 10 1>;
+		};
+
+		led-yellow {
+			label = "obsa7:yellow:stat";
+			gpios = <&gpio1 11 1>;
+		};
+        };
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_gpio_init>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			label = "Init Button";
+			linux,code = <116>;
+			gpios = <&gpio1 6 0>;
+		};
+	};
+};
+
+&nand {
+	chip-delay = <25>;
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0 0x1c0000>;
+	};
+
+	partition@1c0000 {
+		label = "env";
+		reg = <0x1c0000 0x2c0000>;
+	};
+
+	partition@480000 {
+		label = "test";
+		reg = <0x480000 0x160000>;
+	};
+
+	partition@5e0000 {
+		label = "conf";
+		reg = <0x5e0000 0x540000>;
+	};
+
+	partition@b20000 {
+		label = "linux";
+		reg = <0xb20000 0x3d40000>;
+	};
+
+	partition@4860000 {
+		label = "user";
+		reg = <0x4860000 0xb7a0000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	pinctrl-0 = <&pmx_ge1>;
+	pinctrl-names = "default";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
index f7143f1..1173d7f 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
@@ -6,8 +6,8 @@
  * Licensed under GPLv2
  */
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	memory {
@@ -48,27 +48,6 @@
 			pinctrl-names = "default";
 			status = "okay";
 		};
-
-		nand@3000000 {
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x400000>;
-			};
-
-			partition@500000 {
-				label = "root";
-				reg = <0x0500000 0x1fb00000>;
-			};
-		};
 	};
 
 	regulators {
@@ -91,3 +70,40 @@
 		};
 	};
 };
+
+&nand {
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "root";
+		reg = <0x0500000 0x1fb00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
index f620ce4..eac6a21 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
@@ -8,7 +8,7 @@
 
 /dts-v1/;
 
-/include/ "kirkwood-sheevaplug-common.dtsi"
+#include "kirkwood-sheevaplug-common.dtsi"
 
 / {
 	model = "Globalscale Technologies eSATA SheevaPlug";
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/kirkwood-sheevaplug.dts
index bf1dff2..bb61918 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug.dts
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts
@@ -8,7 +8,7 @@
 
 /dts-v1/;
 
-/include/ "kirkwood-sheevaplug-common.dtsi"
+#include "kirkwood-sheevaplug-common.dtsi"
 
 / {
 	model = "Globalscale Technologies SheevaPlug";
diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
index f2052d7..320da67 100644
--- a/arch/arm/boot/dts/kirkwood-topkick.dts
+++ b/arch/arm/boot/dts/kirkwood-topkick.dts
@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6282.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
 
 / {
 	model = "Univeral Scientific Industrial Co. Topkick-1281P2";
@@ -90,37 +90,6 @@
 			pinctrl-names = "default";
 		};
 
-		nand@3000000 {
-			status = "okay";
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x180000>;
-			};
-
-			partition@180000 {
-				label = "u-boot env";
-				reg = <0x0180000 0x20000>;
-			};
-
-			partition@200000 {
-				label = "uImage";
-				reg = <0x0200000 0x600000>;
-			};
-
-			partition@800000 {
-				label = "uInitrd";
-				reg = <0x0800000 0x1000000>;
-			};
-
-			partition@1800000 {
-				label = "rootfs";
-				reg = <0x1800000 0xe800000>;
-			};
-		};
-
 		sata@80000 {
 			status = "okay";
 			nr-ports = <1>;
@@ -203,3 +172,50 @@
 		};
 	};
 };
+
+&nand {
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x180000>;
+	};
+
+	partition@180000 {
+		label = "u-boot env";
+		reg = <0x0180000 0x20000>;
+	};
+
+	partition@200000 {
+		label = "uImage";
+		reg = <0x0200000 0x600000>;
+	};
+
+	partition@800000 {
+		label = "uInitrd";
+		reg = <0x0800000 0x1000000>;
+	};
+
+	partition@1800000 {
+		label = "rootfs";
+		reg = <0x1800000 0xe800000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
index 6dd1038..f755bc1 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
@@ -1,8 +1,8 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
-/include/ "kirkwood-ts219.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-ts219.dtsi"
 
 / {
 	ocp@f1000000 {
@@ -50,4 +50,6 @@
 			gpios = <&gpio0 16 1>;
 		};
 	};
-};
\ No newline at end of file
+};
+
+&ethphy0 { reg = <8>; };
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
index 6fdc5ff..345562f 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
@@ -1,10 +1,20 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6282.dtsi"
-/include/ "kirkwood-ts219.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-ts219.dtsi"
 
 / {
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@2,0 {
+				status = "okay";
+			};
+		};
+	};
+
 	ocp@f1000000 {
 		pinctrl: pinctrl@10000 {
 
@@ -30,14 +40,6 @@
 				marvell,function = "gpio";
 			};
 		};
-		pcie-controller {
-			status = "okay";
-
-			pcie@2,0 {
-				status = "okay";
-			};
-		};
-
 	};
 
 	gpio_keys {
@@ -58,4 +60,6 @@
 			gpios = <&gpio1 5 1>;
 		};
 	};
-};
\ No newline at end of file
+};
+
+&ethphy0 { reg = <0>; };
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index 0c9a94c..39158cf 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -11,6 +11,16 @@
 		bootargs = "console=ttyS0,115200n8";
 	};
 
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
 	ocp@f1000000 {
 		i2c@11000 {
 			status = "okay";
@@ -87,12 +97,21 @@
 			status = "okay";
 			nr-ports = <2>;
 		};
-		pcie-controller {
-			status = "okay";
+	};
+};
 
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy {
+		device_type = "ethernet-phy";
+                /* overwrite reg property in board file */
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 9809fc1..8b73c80 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -1,5 +1,7 @@
 /include/ "skeleton.dtsi"
 
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
 / {
 	compatible = "marvell,kirkwood";
 	interrupt-parent = <&intc>;
@@ -11,6 +13,7 @@
 		cpu@0 {
 			device_type = "cpu";
 			compatible = "marvell,feroceon";
+			reg = <0>;
 			clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
 			clock-names = "cpu_clk", "ddrclk", "powersave";
 		};
@@ -20,23 +23,80 @@
 	       gpio0 = &gpio0;
 	       gpio1 = &gpio1;
 	};
-	intc: interrupt-controller {
-		compatible = "marvell,orion-intc", "marvell,intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0xf1020204 0x04>,
-		      <0xf1020214 0x04>;
+
+	mbus {
+		compatible = "marvell,kirkwood-mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		/* If a board file needs to change this ranges it must replace it completely */
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000	/* internal-regs */
+			  MBUS_ID(0x01, 0x2f) 0 0xf4000000 0x10000	/* nand flash */
+			  MBUS_ID(0x03, 0x01) 0 0xf5000000 0x10000	/* crypto sram */
+			  >;
+		controller = <&mbusc>;
+		pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
+		pcie-io-aperture  = <0xf2000000 0x100000>;   /*   1 MiB    I/O space */
+
+		crypto@0301 {
+			compatible = "marvell,orion-crypto";
+			reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>,
+			      <MBUS_ID(0x03, 0x01) 0 0x800>;
+			reg-names = "regs", "sram";
+			interrupts = <22>;
+			clocks = <&gate_clk 17>;
+			status = "okay";
+		};
+
+		nand: nand@012f {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cle = <0>;
+			ale = <1>;
+			bank-width = <1>;
+			compatible = "marvell,orion-nand";
+			reg = <MBUS_ID(0x01, 0x2f) 0 0x400>;
+			chip-delay = <25>;
+			/* set partition map and/or chip-delay in board dts */
+			clocks = <&gate_clk 7>;
+			status = "disabled";
+		};
 	};
 
 	ocp@f1000000 {
 		compatible = "simple-bus";
-		ranges = <0x00000000 0xf1000000 0x0100000
-		          0xe0000000 0xe0000000 0x8100000 /* PCIE */
-		          0xf4000000 0xf4000000 0x0000400
-		          0xf5000000 0xf5000000 0x0000400>;
+		ranges = <0x00000000 0xf1000000 0x0100000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
+		mbusc: mbus-controller@20000 {
+			compatible = "marvell,mbus-controller";
+			reg = <0x20000 0x80>, <0x1500 0x20>;
+		};
+
+		timer: timer@20300 {
+			compatible = "marvell,orion-timer";
+			reg = <0x20300 0x20>;
+			interrupt-parent = <&bridge_intc>;
+			interrupts = <1>, <2>;
+			clocks = <&core_clk 0>;
+		};
+
+		intc: main-interrupt-ctrl@20200 {
+			compatible = "marvell,orion-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x20200 0x10>, <0x20210 0x10>;
+		};
+
+		bridge_intc: bridge-interrupt-ctrl@20110 {
+			compatible = "marvell,orion-bridge-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x20110 0x8>;
+			interrupts = <1>;
+			marvell,#interrupts = <6>;
+		};
+
 		core_clk: core-clocks@10030 {
 			compatible = "marvell,kirkwood-core-clock";
 			reg = <0x10030 0x4>;
@@ -103,9 +163,11 @@
 			#clock-cells = <1>;
 		};
 
-		wdt@20300 {
+		wdt: watchdog-timer@20300 {
 			compatible = "marvell,orion-wdt";
 			reg = <0x20300 0x28>;
+			interrupt-parent = <&bridge_intc>;
+			interrupts = <3>;
 			clocks = <&gate_clk 7>;
 			status = "okay";
 		};
@@ -133,7 +195,7 @@
 		xor@60900 {
 			compatible = "marvell,orion-xor";
 			reg = <0x60900 0x100
-			       0xd0B00 0x100>;
+			       0x60B00 0x100>;
 			status = "okay";
 			clocks = <&gate_clk 16>;
 
@@ -158,20 +220,6 @@
 			status = "okay";
 		};
 
-		nand@3000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cle = <0>;
-			ale = <1>;
-			bank-width = <1>;
-			compatible = "marvell,orion-nand";
-			reg = <0xf4000000 0x400>;
-			chip-delay = <25>;
-			/* set partition map and/or chip-delay in board dts */
-			clocks = <&gate_clk 7>;
-			status = "disabled";
-		};
-
 		i2c@11000 {
 			compatible = "marvell,mv64xxx-i2c";
 			reg = <0x11000 0x20>;
@@ -183,14 +231,56 @@
 			status = "disabled";
 		};
 
-		crypto@30000 {
-			compatible = "marvell,orion-crypto";
-			reg = <0x30000 0x10000>,
-			      <0xf5000000 0x800>;
-			reg-names = "regs", "sram";
-			interrupts = <22>;
-			clocks = <&gate_clk 17>;
-			status = "okay";
+		mdio: mdio-bus@72004 {
+			compatible = "marvell,orion-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x72004 0x84>;
+			interrupts = <46>;
+			clocks = <&gate_clk 0>;
+			status = "disabled";
+
+			/* add phy nodes in board file */
+		};
+
+		eth0: ethernet-controller@72000 {
+			compatible = "marvell,kirkwood-eth";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x72000 0x4000>;
+			clocks = <&gate_clk 0>;
+			marvell,tx-checksum-limit = <1600>;
+			status = "disabled";
+
+			ethernet0-port@0 {
+				device_type = "network";
+				compatible = "marvell,kirkwood-eth-port";
+				reg = <0>;
+				interrupts = <11>;
+				/* overwrite MAC address in bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+				/* set phy-handle property in board file */
+			};
+		};
+
+		eth1: ethernet-controller@76000 {
+			compatible = "marvell,kirkwood-eth";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x76000 0x4000>;
+			clocks = <&gate_clk 19>;
+			marvell,tx-checksum-limit = <1600>;
+			status = "disabled";
+
+			ethernet1-port@0 {
+				device_type = "network";
+				compatible = "marvell,kirkwood-eth-port";
+				reg = <0>;
+				interrupts = <15>;
+				/* overwrite MAC address in bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+				/* set phy-handle property in board file */
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/mxs-pinfunc.h b/arch/arm/boot/dts/mxs-pinfunc.h
new file mode 100644
index 0000000..c6da987
--- /dev/null
+++ b/arch/arm/boot/dts/mxs-pinfunc.h
@@ -0,0 +1,31 @@
+/*
+ * Header providing constants for i.MX28 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MXS_PINCTRL_H__
+#define __DT_BINDINGS_MXS_PINCTRL_H__
+
+/* fsl,drive-strength property */
+#define MXS_DRIVE_4mA		0
+#define MXS_DRIVE_8mA		1
+#define MXS_DRIVE_12mA		2
+#define MXS_DRIVE_16mA		3
+
+/* fsl,voltage property */
+#define MXS_VOLTAGE_LOW		0
+#define MXS_VOLTAGE_HIGH	1
+
+/* fsl,pull-up property */
+#define MXS_PULL_DISABLE	0
+#define MXS_PULL_ENABLE		1
+
+#endif /* __DT_BINDINGS_MXS_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
new file mode 100644
index 0000000..9c18adf
--- /dev/null
+++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
@@ -0,0 +1,52 @@
+/*
+ * Common file for GPMC connected smsc911x on omaps
+ *
+ * Note that the board specifc DTS file needs to specify
+ * ranges, pinctrl, reg, interrupt parent and interrupts.
+ */
+
+/ {
+	vddvario: regulator-vddvario {
+		  compatible = "regulator-fixed";
+		  regulator-name = "vddvario";
+		  regulator-always-on;
+	};
+
+	vdd33a: regulator-vdd33a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33a";
+		regulator-always-on;
+	};
+};
+
+&gpmc {
+	ethernet@gpmc {
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		bank-width = <2>;
+		gpmc,mux-add-data;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <186>;
+		gpmc,cs-wr-off-ns = <186>;
+		gpmc,adv-on-ns = <12>;
+		gpmc,adv-rd-off-ns = <48>;
+		gpmc,adv-wr-off-ns = <48>;
+		gpmc,oe-on-ns = <54>;
+		gpmc,oe-off-ns = <168>;
+		gpmc,we-on-ns = <54>;
+		gpmc,we-off-ns = <168>;
+		gpmc,rd-cycle-ns = <186>;
+		gpmc,wr-cycle-ns = <186>;
+		gpmc,access-ns = <114>;
+		gpmc,page-burst-access-ns = <6>;
+		gpmc,bus-turnaround-ns = <12>;
+		gpmc,cycle2cycle-delay-ns = <18>;
+		gpmc,wr-data-mux-bus-ns = <90>;
+		gpmc,wr-access-ns = <186>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+		vmmc-supply = <&vddvario>;
+		vmmc_aux-supply = <&vdd33a>;
+		reg-io-width = <4>;
+		smsc,save-mac-address;
+	};
+};
diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi
new file mode 100644
index 0000000..b0ee342
--- /dev/null
+++ b/arch/arm/boot/dts/omap-zoom-common.dtsi
@@ -0,0 +1,33 @@
+/*
+ * Common features on the Zoom debug board
+ */
+
+#include "omap-gpmc-smsc911x.dtsi"
+
+&gpmc {
+	ranges = <3 0 0x10000000 0x00000400>,
+		 <7 0 0x2c000000 0x01000000>;
+
+	/*
+	 * Four port TL16CP754C serial port on GPMC,
+	 * they probably share the same GPIO IRQ
+	 * REVISIT: Add timing support from slls644g.pdf
+	 */
+	8250@3,0 {
+		compatible = "ns16550a";
+		reg = <3 0 0x100>;
+		bank-width = <2>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <6 IRQ_TYPE_EDGE_RISING>;	/* gpio102 */
+		clock-frequency = <1843200>;
+		current-speed = <115200>;
+	};
+
+	ethernet@gpmc {
+		reg = <7 0 0xff>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;	/* gpio158 */
+	};
+};
diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts
index 224c08f..34cdecb 100644
--- a/arch/arm/boot/dts/omap2420-h4.dts
+++ b/arch/arm/boot/dts/omap2420-h4.dts
@@ -50,15 +50,15 @@
 			label = "bootloader";
 			reg = <0 0x20000>;
 		};
-		partition@0x20000 {
+		partition@20000 {
 			label = "params";
 			reg = <0x20000 0x20000>;
 		};
-		partition@0x40000 {
+		partition@40000 {
 			label = "kernel";
 			reg = <0x40000 0x200000>;
 		};
-		partition@0x240000 {
+		partition@240000 {
 			label = "file-system";
 			reg = <0x240000 0x3dc0000>;
 		};
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index afdb164..31a632f 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "TI OMAP3 BeagleBoard xM";
-	compatible = "ti,omap3-beagle-xm, ti,omap3-beagle", "ti,omap3";
+	compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3";
 
 	cpus {
 		cpu@0 {
@@ -69,6 +69,23 @@
 		};
 
 	};
+
+	/* HS USB Port 2 Power */
+	hsusb2_power: hsusb2_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb2_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&twl_gpio 18 0>;	/* GPIO LEDA */
+		startup-delay-us = <70000>;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
+		vcc-supply = <&hsusb2_power>;
+	};
 };
 
 &omap3_pmx_wkup {
@@ -79,6 +96,37 @@
 	};
 };
 
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusbb2_pins
+	>;
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+			0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
+		>;
+	};
+
+	hsusbb2_pins: pinmux_hsusbb2_pins {
+		pinctrl-single,pins = <
+			0x5c0 (PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
+			0x5c2 (PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
+			0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+			0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
+			0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
+			0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
+			0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
+			0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
+			0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
+		>;
+	};
+};
+
 &i2c1 {
 	clock-frequency = <2600000>;
 
@@ -144,19 +192,12 @@
 &usb_otg_hs {
 	interface-type = <0>;
 	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
 	mode = <3>;
 	power = <50>;
 };
 
-&omap3_pmx_core {
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
-			0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
-		>;
-	};
-};
-
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;
@@ -166,3 +207,11 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gpio1_pins>;
 };
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index dfd8310..fa532aa 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -44,17 +44,6 @@
 		};
 	};
 
-	/* HS USB Port 2 RESET */
-	hsusb2_reset: hsusb2_reset_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb2_reset";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio5 19 0>;	/* gpio_147 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
 	/* HS USB Port 2 Power */
 	hsusb2_power: hsusb2_power_reg {
 		compatible = "regulator-fixed";
@@ -68,7 +57,7 @@
 	/* HS USB Host PHY on PORT 2 */
 	hsusb2_phy: hsusb2_phy {
 		compatible = "usb-nop-xceiv";
-		reset-supply = <&hsusb2_reset>;
+		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;	/* gpio_147 */
 		vcc-supply = <&hsusb2_power>;
 	};
 
@@ -101,18 +90,18 @@
 
 	hsusbb2_pins: pinmux_hsusbb2_pins {
 		pinctrl-single,pins = <
-			0x5c0 (PIN_OUTPUT | MUX_MODE3)		/* usbb2_ulpitll_clk.usbb1_ulpiphy_clk */
-			0x5c2 (PIN_OUTPUT | MUX_MODE3)		/* usbb2_ulpitll_clk.usbb1_ulpiphy_stp */
-			0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dir */
-			0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_nxt */
-			0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat0 */
-			0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat1 */
-			0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat2 */
-			0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat3 */
-			0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat4 */
-			0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat5 */
-			0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat6 */
-			0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat7 */
+			0x5c0 (PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
+			0x5c2 (PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
+			0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+			0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
+			0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
+			0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
+			0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
+			0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
+			0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
 		>;
 	};
 
@@ -180,3 +169,12 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gpio1_pins>;
 };
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
index 7ef2827..4665421 100644
--- a/arch/arm/boot/dts/omap3-devkit8000.dts
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -125,7 +125,7 @@
 		nand-bus-width = <16>;
 
 		gpmc,device-nand;
-		gpmc,sync-clki-ps = <0>;
+		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <44>;
 		gpmc,cs-wr-off-ns = <44>;
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
new file mode 100644
index 0000000..4df68ad
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap3-evm-common.dtsi"
+
+
+/ {
+	model = "TI OMAP37XX EVM (TMDSEVM3730)";
+	compatible = "ti,omap3-evm-37xx", "ti,omap36xx";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+	};
+};
+
+&omap3_pmx_core {
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
+			0x11a (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat1.sdmmc1_dat1 */
+			0x11c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat2.sdmmc1_dat2 */
+			0x11e (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat3.sdmmc1_dat3 */
+			0x120 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat4.sdmmc1_dat4 */
+			0x122 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat5.sdmmc1_dat5 */
+			0x124 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat6.sdmmc1_dat6 */
+			0x126 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat7.sdmmc1_dat7 */
+		>;
+	};
+
+	/* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
+			0x12e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			0x150 (PIN_OUTPUT | MUX_MODE4)		/* uart1_cts.gpio_150 */
+			0x14e (PIN_INPUT | MUX_MODE4)		/* uart1_rts.gpio_149 */
+		>;
+	};
+
+	smsc911x_pins: pinmux_smsc911x_pins {
+		pinctrl-single,pins = <
+			0x1a2 (PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
+		>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&gpmc {
+	ranges = <0 0 0x00000000 0x20000000>,
+		 <5 0 0x2c000000 0x01000000>;
+
+	nand@0,0 {
+		linux,mtd-name= "hynix,h8kds0un0mer-4em";
+		reg = <0 0 0>;
+		nand-bus-width = <16>;
+		ti,nand-ecc-opt = "bch8";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+		partition@0x80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1c0000>;
+		};
+		partition@0x1c0000 {
+			label = "Environment";
+			reg = <0x240000 0x40000>;
+		};
+		partition@0x280000 {
+			label = "Kernel";
+			reg = <0x280000 0x500000>;
+		};
+		partition@0x780000 {
+			label = "Filesystem";
+			reg = <0x780000 0x1f880000>;
+		};
+	};
+
+	ethernet@gpmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&smsc911x_pins>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi
new file mode 100644
index 0000000..3007e79
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-evm-common.dtsi
@@ -0,0 +1,96 @@
+/*
+ * Common support for omap3 EVM boards
+ */
+
+#include "omap-gpmc-smsc911x.dtsi"
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		ledb {
+			label = "omap3evm::ledb";
+			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	wl12xx_vmmc: wl12xx_vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio5 22 0>;	/* gpio150 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		vin-supply = <&vmmc2>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	/*
+	 * TVP5146 Video decoder-in for analog input support.
+	 */
+	tvp5146@5c {
+		compatible = "ti,tvp5146m2";
+		reg = <0x5c>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&gpmc {
+	ethernet@gpmc {
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 8>;
+		reg = <5 0 0xff>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
index 7d4329d..e10dcd0 100644
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -8,68 +8,14 @@
 /dts-v1/;
 
 #include "omap34xx.dtsi"
+#include "omap3-evm-common.dtsi"
 
 / {
-	model = "TI OMAP3 EVM (OMAP3530, AM/DM37x)";
+	model = "TI OMAP35XX EVM (TMDSEVM3530)";
 	compatible = "ti,omap3-evm", "ti,omap3";
 
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
-
-	leds {
-		compatible = "gpio-leds";
-		ledb {
-			label = "omap3evm::ledb";
-			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
-			linux,default-trigger = "default-on";
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-
-	/*
-	 * TVP5146 Video decoder-in for analog input support.
-	 */
-	tvp5146@5c {
-		compatible = "ti,tvp5146m2";
-		reg = <0x5c>;
-	};
-};
-
-&twl_gpio {
-	ti,use-leds;
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	mode = <3>;
-	power = <50>;
 };
diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dts
new file mode 100644
index 0000000..b9b55c9
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-gta04.dts
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2013 Marek Belisko <marek@goldelico.com>
+ *
+ * Based on omap3-beagle-xm.dts
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+
+/ {
+	model = "OMAP3 GTA04";
+	compatible = "ti,omap3-gta04", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		aux-button {
+			label = "aux";
+			linux,code = <169>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			gpio-key,wakeup;
+		};
+	};
+};
+
+&omap3_pmx_core {
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			0x152 (PIN_INPUT | MUX_MODE0)		/* uart1_rx.uart1_rx */
+			0x14c (PIN_OUTPUT |MUX_MODE0)		/* uart1_tx.uart1_tx */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			0x14a (PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
+			0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx.uart3_rx */
+			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx.uart3_tx */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
+			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+
+	/* pressure sensor */
+	bmp085@77 {
+		compatible = "bosch,bmp085";
+		reg = <0x77>;
+	};
+
+	/* leds */
+	tca6507@45 {
+		compatible = "ti,tca6507";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x45>;
+
+		gta04_led0: red_aux@0 {
+			label = "gta04:red:aux";
+			reg = <0x0>;
+		};
+
+		gta04_led1: green_aux@1 {
+			label = "gta04:green:aux";
+			reg = <0x1>;
+		};
+
+		gta04_led3: red_power@3 {
+			label = "gta04:red:power";
+			reg = <0x3>;
+			linux,default-trigger = "default-on";
+		};
+
+		gta04_led4: green_power@4 {
+			label = "gta04:green:power";
+			reg = <0x4>;
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <4>;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index bc48b11..ba1e58b 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -48,6 +48,15 @@
 		>;
 	};
 
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			0x10c (PIN_INPUT | MUX_MODE0)		/* mcbsp2_fsx.mcbsp2_fsx */
+			0x10e (PIN_INPUT | MUX_MODE0)		/* mcbsp2_clkx.mcbsp2_clkx */
+			0x110 (PIN_INPUT | MUX_MODE0)		/* mcbsp2_dr.mcbsp2.dr */
+			0x112 (PIN_OUTPUT | MUX_MODE0)		/* mcbsp2_dx.mcbsp2_dx */
+		>;
+	};
+
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
 			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
@@ -68,6 +77,8 @@
 			0x1a2 (PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
 		>;
 	};
+
+	leds_pins: pinmux_leds_pins { };
 };
 
 &i2c1 {
@@ -93,6 +104,11 @@
 	clock-frequency = <400000>;
 };
 
+&mcbsp2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+};
+
 &mmc1 {
       pinctrl-names = "default";
       pinctrl-0 = <&mmc1_pins>;
@@ -127,3 +143,12 @@
 &twl_gpio {
 	ti,use-leds;
 };
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index e8c4828..d5cc792 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -10,13 +10,17 @@
  */
 
 #include "omap3-igep.dtsi"
+#include "omap-gpmc-smsc911x.dtsi"
 
 / {
 	model = "IGEPv2";
 	compatible = "isee,omap3-igep0020", "ti,omap3";
 
 	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
 		compatible = "gpio-leds";
+
 		boot {
 			 label = "omap3:green:boot";
 			 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
@@ -41,19 +45,56 @@
 		};
 	};
 
-	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
+       /* HS USB Port 1 Power */
+       hsusb1_power: hsusb1_power_reg {
+               compatible = "regulator-fixed";
+               regulator-name = "hsusb1_vbus";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>;	/* GPIO LEDA */
+               startup-delay-us = <70000>;
+       };
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
+		vcc-supply = <&hsusb1_power>;
 	};
+};
 
-	vdd33a: regulator-vdd33a {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33a";
-		regulator-always-on;
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&hsusbb1_pins
+	>;
+
+	hsusbb1_pins: pinmux_hsusbb1_pins {
+		pinctrl-single,pins = <
+			0x5aa (PIN_OUTPUT | MUX_MODE3)		/* etk_ctl.hsusb1_clk */
+			0x5a8 (PIN_OUTPUT | MUX_MODE3)		/* etk_clk.hsusb1_stp */
+			0x5bc (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d8.hsusb1_dir */
+			0x5be (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d9.hsusb1_nxt */
+			0x5ac (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d0.hsusb1_data0 */
+			0x5ae (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d1.hsusb1_data1 */
+			0x5b0 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d2.hsusb1_data2 */
+			0x5b2 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d3.hsusb1_data7 */
+			0x5b4 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d4.hsusb1_data4 */
+			0x5b6 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d5.hsusb1_data5 */
+			0x5b8 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d6.hsusb1_data6 */
+			0x5ba (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d7.hsusb1_data3 */
+		>;
 	};
 };
 
+&leds_pins {
+	pinctrl-single,pins = <
+		0x5c4 (PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
+		0x5c6 (PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
+		0x5c8 (PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
+	>;
+};
+
 &i2c3 {
 	clock-frequency = <100000>;
 
@@ -99,59 +140,37 @@
 			label = "SPL";
 			reg = <0 0x100000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "U-Boot";
 			reg = <0x100000 0x180000>;
 		};
-		partition@0x1c0000 {
+		partition@1c0000 {
 			label = "Environment";
 			reg = <0x280000 0x100000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "Kernel";
 			reg = <0x380000 0x300000>;
 		};
-		partition@0x780000 {
+		partition@780000 {
 			label = "Filesystem";
 			reg = <0x680000 0x1f980000>;
 		};
 	};
 
-	ethernet@5,0 {
+	ethernet@gpmc {
 		pinctrl-names = "default";
 		pinctrl-0 = <&smsc911x_pins>;
-		compatible = "smsc,lan9221", "smsc,lan9115";
 		reg = <5 0 0xff>;
-		bank-width = <2>;
-
-		gpmc,mux-add-data;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <186>;
-		gpmc,cs-wr-off-ns = <186>;
-		gpmc,adv-on-ns = <12>;
-		gpmc,adv-rd-off-ns = <48>;
-		gpmc,adv-wr-off-ns = <48>;
-		gpmc,oe-on-ns = <54>;
-		gpmc,oe-off-ns = <168>;
-		gpmc,we-on-ns = <54>;
-		gpmc,we-off-ns = <168>;
-		gpmc,rd-cycle-ns = <186>;
-		gpmc,wr-cycle-ns = <186>;
-		gpmc,access-ns = <114>;
-		gpmc,page-burst-access-ns = <6>;
-		gpmc,bus-turnaround-ns = <12>;
-		gpmc,cycle2cycle-delay-ns = <18>;
-		gpmc,wr-data-mux-bus-ns = <90>;
-		gpmc,wr-access-ns = <186>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-
 		interrupt-parent = <&gpio6>;
-		interrupts = <16 8>;
-		vmmc-supply = <&vddvario>;
-		vmmc_aux-supply = <&vdd33a>;
-		reg-io-width = <4>;
-
-		smsc,save-mac-address;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
+
+&usbhshost {
+	port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy>;
+};
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index 644d053..525e6d9 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -16,7 +16,10 @@
 	compatible = "isee,omap3-igep0030", "ti,omap3";
 
 	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
 		compatible = "gpio-leds";
+
 		boot {
 			 label = "omap3:green:boot";
 			 gpios = <&twl_gpio 13 GPIO_ACTIVE_LOW>;
@@ -43,6 +46,12 @@
 	};
 };
 
+&leds_pins {
+	pinctrl-single,pins = <
+		0x5b0 (PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */
+	>;
+};
+
 &gpmc {
 	ranges = <0 0 0x00000000 0x20000000>;
 
@@ -74,19 +83,19 @@
 			label = "SPL";
 			reg = <0 0x100000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "U-Boot";
 			reg = <0x100000 0x180000>;
 		};
-		partition@0x1c0000 {
+		partition@1c0000 {
 			label = "Environment";
 			reg = <0x280000 0x100000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "Kernel";
 			reg = <0x380000 0x300000>;
 		};
-		partition@0x780000 {
+		partition@780000 {
 			label = "Filesystem";
 			reg = <0x680000 0x1f980000>;
 		};
diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
new file mode 100644
index 0000000..39828ce
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-n9.dts
@@ -0,0 +1,18 @@
+/*
+ * omap3-n9.dts - Device Tree file for Nokia N9
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "omap3-n950-n9.dtsi"
+
+/ {
+	model = "Nokia N9";
+	compatible = "nokia,omap3-n9", "ti,omap3";
+};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
new file mode 100644
index 0000000..c4f20bf
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -0,0 +1,484 @@
+/*
+ * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
+ * Copyright 2013 Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 (or later) as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+
+/ {
+	model = "Nokia N900";
+	compatible = "nokia,omap3-n900", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		camera_lens_cover {
+			label = "Camera Lens Cover";
+			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
+			gpio-key,wakeup;
+		};
+
+		camera_focus {
+			label = "Camera Focus";
+			gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
+			linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
+			gpio-key,wakeup;
+		};
+
+		camera_capture {
+			label = "Camera Capture";
+			gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
+			linux,code = <0xd4>; /* KEY_CAMERA */
+			gpio-key,wakeup;
+		};
+
+		lock_button {
+			label = "Lock Button";
+			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
+			linux,code = <0x98>; /* KEY_SCREENLOCK */
+			gpio-key,wakeup;
+		};
+
+		keypad_slide {
+			label = "Keypad Slide";
+			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
+			gpio-key,wakeup;
+		};
+
+		proximity_sensor {
+			label = "Proximity Sensor";
+			gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */
+		};
+	};
+
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			0x14a (PIN_INPUT | MUX_MODE0)		/* uart2_rx */
+			0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx */
+			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			0x18a (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			0x18e (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
+			0x190 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			0x192 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			0x194 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
+			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd */
+			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0 */
+			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
+			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
+			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
+		>;
+	};
+
+	display_pins: pinmux_display_pins {
+		pinctrl-single,pins = <
+			0x0d4 (PIN_OUTPUT | MUX_MODE4)		/* RX51_LCD_RESET_GPIO */
+		>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <2200000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&vaux1 {
+	regulator-name = "V28";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-always-on; /* due battery cover sensor */
+};
+
+&vaux2 {
+	regulator-name = "VCSI";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&vaux3 {
+	regulator-name = "VMMC2_30";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&vaux4 {
+	regulator-name = "VCAM_ANA_28";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&vmmc1 {
+	regulator-name = "VMMC1";
+	regulator-min-microvolt = <1850000>;
+	regulator-max-microvolt = <3150000>;
+};
+
+&vmmc2 {
+	regulator-name = "V28_A";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-always-on; /* due VIO leak to AIC34 VDDs */
+};
+
+&vpll1 {
+	regulator-name = "VPLL";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&vpll2 {
+	regulator-name = "VSDI_CSI";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&vsim {
+	regulator-name = "VMMC2_IO_18";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&vio {
+	regulator-name = "VIO";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+
+};
+
+&vintana1 {
+	regulator-name = "VINTANA1";
+	/* fixed to 1500000 */
+	regulator-always-on;
+};
+
+&vintana2 {
+	regulator-name = "VINTANA2";
+	regulator-min-microvolt = <2750000>;
+	regulator-max-microvolt = <2750000>;
+	regulator-always-on;
+};
+
+&vintdig {
+	regulator-name = "VINTDIG";
+	/* fixed to 1500000 */
+	regulator-always-on;
+};
+
+&twl {
+	twl_audio: audio {
+		compatible = "ti,twl4030-audio";
+		ti,enable-vibra = <1>;
+	};
+};
+
+&twl_gpio {
+	ti,pullups	= <0x0>;
+	ti,pulldowns	= <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	clock-frequency = <100000>;
+
+	tlv320aic3x: tlv320aic3x@18 {
+		compatible = "ti,tlv320aic3x";
+		reg = <0x18>;
+		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
+		ai3x-gpio-func = <
+			0 /* AIC3X_GPIO1_FUNC_DISABLED */
+			5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
+		>;
+
+		AVDD-supply = <&vmmc2>;
+		DRVDD-supply = <&vmmc2>;
+		IOVDD-supply = <&vio>;
+		DVDD-supply = <&vio>;
+	};
+
+	tlv320aic3x_aux: tlv320aic3x@19 {
+		compatible = "ti,tlv320aic3x";
+		reg = <0x19>;
+		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
+
+		AVDD-supply = <&vmmc2>;
+		DRVDD-supply = <&vmmc2>;
+		IOVDD-supply = <&vio>;
+		DVDD-supply = <&vio>;
+	};
+
+	lp5523: lp5523@32 {
+		compatible = "national,lp5523";
+		reg = <0x32>;
+		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+		enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
+
+		chan0 {
+			chan-name = "lp5523:kb1";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan1 {
+			chan-name = "lp5523:kb2";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan2 {
+			chan-name = "lp5523:kb3";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan3 {
+			chan-name = "lp5523:kb4";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan4 {
+			chan-name = "lp5523:b";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan5 {
+			chan-name = "lp5523:g";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan6 {
+			chan-name = "lp5523:r";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan7 {
+			chan-name = "lp5523:kb5";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan8 {
+			chan-name = "lp5523:kb6";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+	};
+
+	bq27200: bq27200@55 {
+		compatible = "ti,bq27200";
+		reg = <0x55>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&gpmc {
+	ranges = <0 0 0x04000000 0x10000000>; /* 256MB */
+
+	/* gpio-irq for dma: 65 */
+
+	onenand@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0 0 0x10000000>;
+
+		gpmc,sync-read;
+		gpmc,sync-write;
+		gpmc,burst-length = <16>;
+		gpmc,burst-read;
+		gpmc,burst-wrap;
+		gpmc,burst-write;
+		gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
+		gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <87>;
+		gpmc,cs-wr-off-ns = <87>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <10>;
+		gpmc,adv-wr-off-ns = <10>;
+		gpmc,oe-on-ns = <15>;
+		gpmc,oe-off-ns = <87>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <87>;
+		gpmc,rd-cycle-ns = <112>;
+		gpmc,wr-cycle-ns = <112>;
+		gpmc,access-ns = <81>;
+		gpmc,page-burst-access-ns = <15>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <5>;
+		gpmc,wr-data-mux-bus-ns = <30>;
+		gpmc,wr-access-ns = <81>;
+		gpmc,sync-clk-ps = <15000>;
+
+		/*
+		 * MTD partition table corresponding to Nokia's
+		 * Maemo 5 (Fremantle) release.
+		 */
+		partition@0 {
+			label = "bootloader";
+			reg = <0x00000000 0x00020000>;
+			read-only;
+		};
+		partition@1 {
+			label = "config";
+			reg = <0x00020000 0x00060000>;
+		};
+		partition@2 {
+			label = "log";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@3 {
+			label = "kernel";
+			reg = <0x000c0000 0x00200000>;
+		};
+		partition@4 {
+			label = "initfs";
+			reg = <0x002c0000 0x00200000>;
+		};
+		partition@5 {
+			label = "rootfs";
+			reg = <0x004c0000 0x0fb40000>;
+		};
+	};
+};
+
+&mcspi1 {
+	/*
+	 * For some reason, touchscreen is necessary for screen to work at
+	 * all on real hw. It works well without it on emulator.
+	 *
+	 * Also... order in the device tree actually matters here.
+	 */
+	tsc2005@0 {
+		compatible = "tsc2005";
+		spi-max-frequency = <6000000>;
+		reg = <0>;
+	};
+	mipid@2 {
+		compatible = "acx565akm";
+		spi-max-frequency = <6000000>;
+		reg = <2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&display_pins>;
+	};
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <2>;
+	power = <50>;
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
new file mode 100644
index 0000000..94eb77d
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -0,0 +1,174 @@
+/*
+ * omap3-n950-n9.dtsi - Device Tree file for Nokia N950 & N9 (common stuff)
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap36xx.dtsi"
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	vemmc: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VEMMC";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		gpio = <&gpio5 29 0>; /* gpio line 157 */
+		startup-delay-us = <150>;
+		enable-active-high;
+	};
+};
+
+&omap3_pmx_core {
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
+			0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
+			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
+			0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
+			0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
+			0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2900000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+/include/ "twl4030.dtsi"
+
+&twl {
+	compatible = "ti,twl5031";
+};
+
+&twl_gpio {
+	ti,pullups	= <0x000001>; /* BIT(0) */
+	ti,pulldowns	= <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	status = "disabled";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&vemmc>;
+	bus-width = <4>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&gpmc {
+	ranges = <0 0 0x04000000 0x20000000>;
+
+	onenand@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0 0 0x20000000>;
+
+		gpmc,sync-read;
+		gpmc,sync-write;
+		gpmc,burst-length = <16>;
+		gpmc,burst-read;
+		gpmc,burst-wrap;
+		gpmc,burst-write;
+		gpmc,device-width = <2>;
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <87>;
+		gpmc,cs-wr-off-ns = <87>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <10>;
+		gpmc,adv-wr-off-ns = <10>;
+		gpmc,oe-on-ns = <15>;
+		gpmc,oe-off-ns = <87>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <87>;
+		gpmc,rd-cycle-ns = <112>;
+		gpmc,wr-cycle-ns = <112>;
+		gpmc,access-ns = <81>;
+		gpmc,page-burst-access-ns = <15>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <5>;
+		gpmc,wr-data-mux-bus-ns = <30>;
+		gpmc,wr-access-ns = <81>;
+		gpmc,sync-clk-ps = <15000>;
+
+		/*
+		 * MTD partition table corresponding to Nokia's MeeGo 1.2
+		 * Harmattan release.
+		 */
+		partition@0 {
+			label = "bootloader";
+			reg = <0x00000000 0x00100000>;
+		};
+		partition@1 {
+			label = "config";
+			reg = <0x00100000 0x002c0000>;
+		};
+		partition@2 {
+			label = "kernel";
+			reg = <0x003c0000 0x01000000>;
+		};
+		partition@3 {
+			label = "log";
+			reg = <0x013c0000 0x00200000>;
+		};
+		partition@4 {
+			label = "var";
+			reg = <0x015c0000 0x1ca40000>;
+		};
+		partition@5 {
+			label = "moslo";
+			reg = <0x1e000000 0x02000000>;
+		};
+		partition@6 {
+			label = "omap2-onenand";
+			reg = <0x00000000 0x20000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts
new file mode 100644
index 0000000..b076a52
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-n950.dts
@@ -0,0 +1,18 @@
+/*
+ * omap3-n950.dts - Device Tree file for Nokia N950
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "omap3-n950-n9.dtsi"
+
+/ {
+	model = "Nokia N950";
+	compatible = "nokia,omap3-n950", "ti,omap3";
+};
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
index 8f1abec..a461d2f 100644
--- a/arch/arm/boot/dts/omap3-overo.dtsi
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -76,6 +76,8 @@
 &usb_otg_hs {
 	interface-type = <0>;
 	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
 	mode = <3>;
 	power = <50>;
 };
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
new file mode 100644
index 0000000..15eb9fe
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -0,0 +1,217 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap-zoom-common.dtsi"
+
+/ {
+	model = "TI Zoom3";
+	compatible = "ti,omap3-zoom3", "ti,omap36xx", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	vddvario: regulator-vddvario {
+		  compatible = "regulator-fixed";
+		  regulator-name = "vddvario";
+		  regulator-always-on;
+	};
+
+	vdd33a: regulator-vdd33a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33a";
+		regulator-always-on;
+	};
+
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio4 5 0>;	/* gpio101 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&omap3_pmx_core {
+	/* REVISIT: twl gpio0 is mmc0_cd */
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			0x116 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			0x12c (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
+			0x12e (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
+			0x130 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
+			0x132 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
+			0x134 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat4.sdmmc2_dat4 */
+			0x136 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat5.sdmmc2_dat5 */
+			0x138 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat6.sdmmc2_dat6 */
+			0x13a (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat7.sdmmc2_dat7 */
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			0x168 (PIN_INPUT | MUX_MODE4)	/* mcbsp1_clkx.gpio_162 WLAN IRQ */
+			0x1a0 (PIN_INPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs1.sdmmc3_cmd */
+			0x5a8 (PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_clk.sdmmc3_clk */
+			0x5b4 (PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d4.sdmmc3_dat0 */
+			0x5b6 (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
+			0x5b8 (PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d6.sdmmc3_dat2 */
+			0x5b2 (PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d3.sdmmc3_dat3 */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+                        0x150 (PIN_INPUT | MUX_MODE0)		/* uart1_cts.uart1_cts */
+                        0x14e (PIN_OUTPUT | MUX_MODE0)		/* uart1_rts.uart1_rts */
+                        0x152 (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+                        0x14c (PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+                        0x144 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
+                        0x146 (PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
+                        0x14a (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
+                        0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+                        0x16a (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
+                        0x16c (PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
+                        0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+                        0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	/* wl12xx GPIO output for WLAN_EN */
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			0xea (PIN_OUTPUT| MUX_MODE4)		/* cam_d2.gpio_101 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+	wlan_host_wkup: pinmux_wlan_host_wkup_pins {
+		pinctrl-single,pins = <
+			0x1a (PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_clkout1.gpio_10 WLAN_HOST_WKUP */
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+#include "twl4030.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	/*
+	 * TVP5146 Video decoder-in for analog input support.
+	 */
+	tvp5146@5c {
+		compatible = "ti,tvp5146m2";
+		reg = <0x5c>;
+	};
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+/*
+&mmc2 {
+	vmmc-supply = <&vmmc2>;
+	ti,non-removable;
+	bus-width = <8>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+};
+*/
+&mmc3 {
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart3_pins>;
+};
+
+&uart4 {
+       status = "disabled";
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 7d95cda..f3a0c26 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -19,6 +19,9 @@
 	interrupt-parent = <&intc>;
 
 	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -37,6 +40,7 @@
 
 	pmu {
 		compatible = "arm,cortex-a8-pmu";
+		reg = <0x54000000 0x800000>;
 		interrupts = <3>;
 		ti,hwmods = "debugss";
 	};
@@ -71,6 +75,8 @@
 	 */
 	ocp {
 		compatible = "simple-bus";
+		reg = <0x68000000 0x10000>;
+		interrupts = <9 10>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
@@ -107,17 +113,21 @@
 			reg = <0x48002030 0x05cc>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
 			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7f1f>;
+			pinctrl-single,function-mask = <0xff1f>;
 		};
 
-		omap3_pmx_wkup: pinmux@0x48002a00 {
+		omap3_pmx_wkup: pinmux@48002a00 {
 			compatible = "ti,omap3-padconf", "pinctrl-single";
 			reg = <0x48002a00 0x5c>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
 			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7f1f>;
+			pinctrl-single,function-mask = <0xff1f>;
 		};
 
 		gpio1: gpio@48310000 {
@@ -189,24 +199,40 @@
 
 		uart1: serial@4806a000 {
 			compatible = "ti,omap3-uart";
+			reg = <0x4806a000 0x2000>;
+			interrupts = <72>;
+			dmas = <&sdma 49 &sdma 50>;
+			dma-names = "tx", "rx";
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
 		};
 
 		uart2: serial@4806c000 {
 			compatible = "ti,omap3-uart";
+			reg = <0x4806c000 0x400>;
+			interrupts = <73>;
+			dmas = <&sdma 51 &sdma 52>;
+			dma-names = "tx", "rx";
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 		};
 
 		uart3: serial@49020000 {
 			compatible = "ti,omap3-uart";
+			reg = <0x49020000 0x400>;
+			interrupts = <74>;
+			dmas = <&sdma 53 &sdma 54>;
+			dma-names = "tx", "rx";
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 		};
 
 		i2c1: i2c@48070000 {
 			compatible = "ti,omap3-i2c";
+			reg = <0x48070000 0x80>;
+			interrupts = <56>;
+			dmas = <&sdma 27 &sdma 28>;
+			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c1";
@@ -214,6 +240,10 @@
 
 		i2c2: i2c@48072000 {
 			compatible = "ti,omap3-i2c";
+			reg = <0x48072000 0x80>;
+			interrupts = <57>;
+			dmas = <&sdma 29 &sdma 30>;
+			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c2";
@@ -221,6 +251,10 @@
 
 		i2c3: i2c@48060000 {
 			compatible = "ti,omap3-i2c";
+			reg = <0x48060000 0x80>;
+			interrupts = <61>;
+			dmas = <&sdma 25 &sdma 26>;
+			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
@@ -228,6 +262,8 @@
 
 		mcspi1: spi@48098000 {
 			compatible = "ti,omap2-mcspi";
+			reg = <0x48098000 0x100>;
+			interrupts = <65>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi1";
@@ -246,6 +282,8 @@
 
 		mcspi2: spi@4809a000 {
 			compatible = "ti,omap2-mcspi";
+			reg = <0x4809a000 0x100>;
+			interrupts = <66>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi2";
@@ -259,6 +297,8 @@
 
 		mcspi3: spi@480b8000 {
 			compatible = "ti,omap2-mcspi";
+			reg = <0x480b8000 0x100>;
+			interrupts = <91>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi3";
@@ -272,6 +312,8 @@
 
 		mcspi4: spi@480ba000 {
 			compatible = "ti,omap2-mcspi";
+			reg = <0x480ba000 0x100>;
+			interrupts = <48>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi4";
@@ -280,8 +322,17 @@
 			dma-names = "tx0", "rx0";
 		};
 
+		hdqw1w: 1w@480b2000 {
+			compatible = "ti,omap3-1w";
+			reg = <0x480b2000 0x1000>;
+			interrupts = <58>;
+			ti,hwmods = "hdq1w";
+		};
+
 		mmc1: mmc@4809c000 {
 			compatible = "ti,omap3-hsmmc";
+			reg = <0x4809c000 0x200>;
+			interrupts = <83>;
 			ti,hwmods = "mmc1";
 			ti,dual-volt;
 			dmas = <&sdma 61>, <&sdma 62>;
@@ -290,6 +341,8 @@
 
 		mmc2: mmc@480b4000 {
 			compatible = "ti,omap3-hsmmc";
+			reg = <0x480b4000 0x200>;
+			interrupts = <86>;
 			ti,hwmods = "mmc2";
 			dmas = <&sdma 47>, <&sdma 48>;
 			dma-names = "tx", "rx";
@@ -297,6 +350,8 @@
 
 		mmc3: mmc@480ad000 {
 			compatible = "ti,omap3-hsmmc";
+			reg = <0x480ad000 0x200>;
+			interrupts = <94>;
 			ti,hwmods = "mmc3";
 			dmas = <&sdma 77>, <&sdma 78>;
 			dma-names = "tx", "rx";
@@ -304,6 +359,7 @@
 
 		wdt2: wdt@48314000 {
 			compatible = "ti,omap3-wdt";
+			reg = <0x48314000 0x80>;
 			ti,hwmods = "wd_timer2";
 		};
 
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
index e2249bc..281914e 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -84,15 +84,15 @@
 			label = "bootloader-nor";
 			reg = <0 0x40000>;
 		};
-		partition@0x40000 {
+		partition@40000 {
 			label = "params-nor";
 			reg = <0x40000 0x40000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "kernel-nor";
 			reg = <0x80000 0x200000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "filesystem-nor";
 			reg = <0x240000 0x7d80000>;
 		};
@@ -125,19 +125,19 @@
 			label = "xloader-nand";
 			reg = <0 0x80000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "bootloader-nand";
 			reg = <0x80000 0x140000>;
 		};
-		partition@0x1c0000 {
+		partition@1c0000 {
 			label = "params-nand";
 			reg = <0x1c0000 0xc0000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "kernel-nand";
 			reg = <0x280000 0x500000>;
 		};
-		partition@0x780000 {
+		partition@780000 {
 			label = "filesystem-nand";
 			reg = <0x780000 0x7880000>;
 		};
@@ -170,19 +170,19 @@
 			label = "xloader-onenand";
 			reg = <0 0x80000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "bootloader-onenand";
 			reg = <0x80000 0x40000>;
 		};
-		partition@0xc0000 {
+		partition@c0000 {
 			label = "params-onenand";
 			reg = <0xc0000 0x20000>;
 		};
-		partition@0xe0000 {
+		partition@e0000 {
 			label = "kernel-onenand";
 			reg = <0xe0000 0x200000>;
 		};
-		partition@0x2e0000 {
+		partition@2e0000 {
 			label = "filesystem-onenand";
 			reg = <0x2e0000 0xfd20000>;
 		};
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index f8b3765..380c22e 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -31,6 +31,10 @@
 	ocp {
 		uart4: serial@49042000 {
 			compatible = "ti,omap3-uart";
+			reg = <0x49042000 0x400>;
+			interrupts = <80>;
+			dmas = <&sdma 81 &sdma 82>;
+			dma-names = "tx", "rx";
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
 		};
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index faa95b5..298e850 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -60,22 +60,6 @@
 			"AFMR", "Line In";
 	};
 
-	/*
-	 * Temp hack: Need to be replaced with the proper gpio-controlled
-	 * reset driver as soon it will be merged.
-	 * http://thread.gmane.org/gmane.linux.drivers.devicetree/36830
-	 */
-	/* HS USB Port 1 RESET */
-	hsusb1_reset: hsusb1_reset_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb1_reset";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 30 0>;	/* gpio_62 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
 	/* HS USB Port 1 Power */
 	hsusb1_power: hsusb1_power_reg {
 		compatible = "regulator-fixed";
@@ -97,7 +81,7 @@
 	/* HS USB Host PHY on PORT 1 */
 	hsusb1_phy: hsusb1_phy {
 		compatible = "usb-nop-xceiv";
-		reset-supply = <&hsusb1_reset>;
+		reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;   /* gpio_62 */
 		vcc-supply = <&hsusb1_power>;
 	/**
 	 * FIXME:
@@ -107,39 +91,34 @@
 	 */
 		clock-frequency = <19200000>;
 	};
-};
-
-&omap4_pmx_wkup {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&twl6030_wkup_pins
-	>;
 
-	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
-		pinctrl-single,pins = <
-			0x14 (PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
-		>;
+	/* regulator for wl12xx on sdio5 */
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio2 11 0>;
+		startup-delay-us = <70000>;
+		enable-active-high;
 	};
 };
 
 &omap4_pmx_core {
 	pinctrl-names = "default";
 	pinctrl-0 = <
-			&twl6030_pins
 			&twl6040_pins
 			&mcpdm_pins
 			&mcbsp1_pins
+			&dss_dpi_pins
+			&tfp410_pins
 			&dss_hdmi_pins
 			&tpd12s015_pins
 			&hsusbb1_pins
 	>;
 
-	twl6030_pins: pinmux_twl6030_pins {
-		pinctrl-single,pins = <
-			0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
-		>;
-	};
-
 	twl6040_pins: pinmux_twl6040_pins {
 		pinctrl-single,pins = <
 			0xe0 (PIN_OUTPUT | MUX_MODE3)	/* hdq_sio.gpio_127 */
@@ -166,6 +145,47 @@
 		>;
 	};
 
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			0x122 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data23 */
+			0x124 (PIN_OUTPUT | MUX_MODE5) 	/* dispc2_data22 */
+			0x126 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data21 */
+			0x128 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data20 */
+			0x12a (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data19 */
+			0x12c (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data18 */
+			0x12e (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data15 */
+			0x130 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data14 */
+			0x132 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data13 */
+			0x134 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data12 */
+			0x136 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data11 */
+
+			0x174 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data10 */
+			0x176 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data9 */
+			0x178 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data16 */
+			0x17a (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data17 */
+			0x17c (PIN_OUTPUT | MUX_MODE5)	/* dispc2_hsync */
+			0x17e (PIN_OUTPUT | MUX_MODE5)	/* dispc2_pclk */
+			0x180 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_vsync */
+			0x182 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_de */
+			0x184 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data8 */
+			0x186 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data7 */
+			0x188 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data6 */
+			0x18a (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data5 */
+			0x18c (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data4 */
+			0x18e (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data3 */
+
+			0x190 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data2 */
+			0x192 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data1 */
+			0x194 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data0 */
+		>;
+	};
+
+	tfp410_pins: pinmux_tfp410_pins {
+		pinctrl-single,pins = <
+			0x144 (PIN_OUTPUT | MUX_MODE3)	/* gpio_0 */
+		>;
+	};
+
 	dss_hdmi_pins: pinmux_dss_hdmi_pins {
 		pinctrl-single,pins = <
 			0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
@@ -235,6 +255,33 @@
 			0x1c (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
 		>;
 	};
+
+	/*
+	 * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
+	 * REVISIT: Are the pull-ups needed for GPIO 48 and 49?
+	 */
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			0x26 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
+			0x2c (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 */
+			0x30 (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
+			0x32 (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 */
+		>;
+	};
+
+	/* wl12xx GPIO inputs and SDIO pins */
+	wl12xx_pins: pinmux_wl12xx_pins {
+		pinctrl-single,pins = <
+			0x38 (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs2.gpio_52 */
+			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
+			0x108 (PIN_OUTPUT | MUX_MODE0)		/* sdmmc5_clk.sdmmc5_clk */
+			0x10a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
+			0x10c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
+			0x10e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
+			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
+			0x112 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
+		>;
+	};
 };
 
 &i2c1 {
@@ -265,6 +312,7 @@
 };
 
 #include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
 
 &i2c2 {
 	pinctrl-names = "default";
@@ -314,8 +362,12 @@
 };
 
 &mmc5 {
-	ti,non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&wl12xx_pins>;
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
 	bus-width = <4>;
+	cap-power-off-card;
 };
 
 &emif1 {
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index 56c4354..816d1c9 100644
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -62,3 +62,7 @@
 		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 	};
 };
+
+&gpio1 {
+	 ti,no-reset-on-init;
+};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 7951b4e..5fc3f43 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -140,25 +140,24 @@
 			"DMic", "Digital Mic",
 			"Digital Mic", "Digital Mic1 Bias";
 	};
-};
-
-&omap4_pmx_wkup {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&twl6030_wkup_pins
-	>;
 
-	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
-		pinctrl-single,pins = <
-			0x14 (PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
-		>;
+	/* regulator for wl12xx on sdio5 */
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio2 22 0>;
+		startup-delay-us = <70000>;
+		enable-active-high;
 	};
 };
 
 &omap4_pmx_core {
 	pinctrl-names = "default";
 	pinctrl-0 = <
-			&twl6030_pins
 			&twl6040_pins
 			&mcpdm_pins
 			&dmic_pins
@@ -193,12 +192,6 @@
 		>;
 	};
 
-	twl6030_pins: pinmux_twl6030_pins {
-		pinctrl-single,pins = <
-			0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
-		>;
-	};
-
 	twl6040_pins: pinmux_twl6040_pins {
 		pinctrl-single,pins = <
 			0xe0 (PIN_OUTPUT | MUX_MODE3)		/* hdq_sio.gpio_127 */
@@ -295,6 +288,26 @@
 			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
 		>;
 	};
+
+	/* wl12xx GPIO output for WLAN_EN */
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			0x3c (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nwp.gpio_54 */
+		>;
+	};
+
+	/* wl12xx GPIO inputs and SDIO pins */
+	wl12xx_pins: pinmux_wl12xx_pins {
+		pinctrl-single,pins = <
+			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
+			0x108 (PIN_OUTPUT | MUX_MODE3)		/* sdmmc5_clk.sdmmc5_clk */
+			0x10a (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_cmd.sdmmc5_cmd */
+			0x10c (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat0.sdmmc5_dat0 */
+			0x10e (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat1.sdmmc5_dat1 */
+			0x110 (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat2.sdmmc5_dat2 */
+			0x112 (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat3.sdmmc5_dat3 */
+		>;
+	};
 };
 
 &i2c1 {
@@ -337,6 +350,7 @@
 };
 
 #include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
 
 &i2c2 {
 	pinctrl-names = "default";
@@ -420,8 +434,12 @@
 };
 
 &mmc5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wl12xx_pins>;
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
 	bus-width = <4>;
-	ti,non-removable;
+	cap-power-off-card;
 };
 
 &emif1 {
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 22d9f2b..a1e0585 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -17,6 +17,10 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -56,7 +60,7 @@
 		cache-level = <2>;
 	};
 
-	local-timer@0x48240600 {
+	local-timer@48240600 {
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0x48240600 0x20>;
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
@@ -114,6 +118,8 @@
 			reg = <0x4a100040 0x0196>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
 			pinctrl-single,register-width = <16>;
 			pinctrl-single,function-mask = <0x7fff>;
 		};
@@ -122,6 +128,8 @@
 			reg = <0x4a31e040 0x0038>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
 			pinctrl-single,register-width = <16>;
 			pinctrl-single,function-mask = <0x7fff>;
 		};
@@ -214,6 +222,7 @@
 			gpmc,num-cs = <8>;
 			gpmc,num-waitpins = <4>;
 			ti,hwmods = "gpmc";
+			ti,no-idle-on-init;
 		};
 
 		uart1: serial@4806a000 {
@@ -248,6 +257,12 @@
 			clock-frequency = <48000000>;
 		};
 
+		hwspinlock: spinlock@4a0f6000 {
+			compatible = "ti,omap4-hwspinlock";
+			reg = <0x4a0f6000 0x1000>;
+			ti,hwmods = "spinlock";
+		};
+
 		i2c1: i2c@48070000 {
 			compatible = "ti,omap4-i2c";
 			reg = <0x48070000 0x100>;
@@ -492,6 +507,7 @@
 			reg = <0x4c000000 0x100>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "emif1";
+			ti,no-idle-on-init;
 			phy-type = <1>;
 			hw-caps-read-idle-ctrl;
 			hw-caps-ll-interface;
@@ -503,6 +519,7 @@
 			reg = <0x4d000000 0x100>;
 			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "emif2";
+			ti,no-idle-on-init;
 			phy-type = <1>;
 			hw-caps-read-idle-ctrl;
 			hw-caps-ll-interface;
@@ -519,7 +536,8 @@
 			usb2_phy: usb2phy@4a0ad080 {
 				compatible = "ti,omap-usb2";
 				reg = <0x4a0ad080 0x58>;
-				ctrl-module = <&omap_control_usb>;
+				ctrl-module = <&omap_control_usb2phy>;
+				#phy-cells = <0>;
 			};
 		};
 
@@ -643,12 +661,16 @@
 			};
 		};
 
-		omap_control_usb: omap-control-usb@4a002300 {
-			compatible = "ti,omap-control-usb";
-			reg = <0x4a002300 0x4>,
-			      <0x4a00233c 0x4>;
-			reg-names = "control_dev_conf", "otghs_control";
-			ti,type = <1>;
+		omap_control_usb2phy: control-phy@4a002300 {
+			compatible = "ti,control-phy-usb2";
+			reg = <0x4a002300 0x4>;
+			reg-names = "power";
+		};
+
+		omap_control_usbotg: control-phy@4a00233c {
+			compatible = "ti,control-phy-otghs";
+			reg = <0x4a00233c 0x4>;
+			reg-names = "otghs_control";
 		};
 
 		usb_otg_hs: usb_otg_hs@4a0ab000 {
@@ -658,10 +680,30 @@
 			interrupt-names = "mc", "dma";
 			ti,hwmods = "usb_otg_hs";
 			usb-phy = <&usb2_phy>;
+			phys = <&usb2_phy>;
+			phy-names = "usb2-phy";
 			multipoint = <1>;
 			num-eps = <16>;
 			ram-bits = <12>;
-			ti,has-mailbox;
+			ctrl-module = <&omap_control_usbotg>;
+		};
+
+		aes: aes@4b501000 {
+			compatible = "ti,omap4-aes";
+			ti,hwmods = "aes";
+			reg = <0x4b501000 0xa0>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&sdma 111>, <&sdma 110>;
+			dma-names = "tx", "rx";
+		};
+
+		des: des@480a5000 {
+			compatible = "ti,omap4-des";
+			ti,hwmods = "des";
+			reg = <0x480a5000 0xa0>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&sdma 117>, <&sdma 116>;
+			dma-names = "tx", "rx";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 65d7b60..002fa70 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -27,21 +27,10 @@
 		regulator-max-microvolt = <3000000>;
 	};
 
-	/* HS USB Port 2 RESET */
-	hsusb2_reset: hsusb2_reset_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb2_reset";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 HUB_NRESET */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
 	/* HS USB Host PHY on PORT 2 */
 	hsusb2_phy: hsusb2_phy {
 		compatible = "usb-nop-xceiv";
-		reset-supply = <&hsusb2_reset>;
+		reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
 	/**
 	  * FIXME
 	  * Put the right clock phandle here when available
@@ -51,21 +40,10 @@
 		clock-frequency = <19200000>;
 	};
 
-	/* HS USB Port 3 RESET */
-	hsusb3_reset: hsusb3_reset_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb3_reset";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; /* gpio3_79 ETH_NRESET */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
 	/* HS USB Host PHY on PORT 3 */
 	hsusb3_phy: hsusb3_phy {
 		compatible = "usb-nop-xceiv";
-		reset-supply = <&hsusb3_reset>;
+		reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
 	};
 
 	leds {
@@ -84,7 +62,6 @@
 	pinctrl-0 = <
 			&twl6040_pins
 			&mcpdm_pins
-			&dmic_pins
 			&mcbsp1_pins
 			&mcbsp2_pins
 			&usbhost_pins
@@ -93,7 +70,7 @@
 
 	twl6040_pins: pinmux_twl6040_pins {
 		pinctrl-single,pins = <
-			0x18a (PIN_OUTPUT | MUX_MODE6)	/* perslimbus2_clock.gpio5_145 */
+			0x17e (PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */
 		>;
 	};
 
@@ -107,15 +84,6 @@
 		>;
 	};
 
-	dmic_pins: pinmux_dmic_pins {
-		pinctrl-single,pins = <
-			0x144 (PIN_INPUT | MUX_MODE0)		/* abedmic_din1.abedmic_din1 */
-			0x146 (PIN_INPUT | MUX_MODE0)		/* abedmic_din2.abedmic_din2 */
-			0x148 (PIN_INPUT | MUX_MODE0)		/* abedmic_din3.abedmic_din3 */
-			0x14a (PIN_OUTPUT | MUX_MODE0)		/* abedmic_clk1.abedmic_clk1 */
-		>;
-	};
-
 	mcbsp1_pins: pinmux_mcbsp1_pins {
 		pinctrl-single,pins = <
 			0x14c (PIN_INPUT | MUX_MODE1)		/* abedmic_clk2.abemcbsp1_fsx */
@@ -153,25 +121,25 @@
 			0xbc (PIN_INPUT | MUX_MODE0)		/*  mcspi2_clk */
 			0xbe (PIN_INPUT | MUX_MODE0)		/*  mcspi2_simo */
 			0xc0 (PIN_INPUT_PULLUP | MUX_MODE0)	/*  mcspi2_somi */
-			0xc2 (PIN_OUTPUT | MUX_MODE0)		/*  mcspi2_cs */
+			0xc2 (PIN_OUTPUT | MUX_MODE0)		/*  mcspi2_cs0 */
 		>;
 	};
 
 	mcspi3_pins: pinmux_mcspi3_pins {
 		pinctrl-single,pins = <
-			0x78 (PIN_INPUT | MUX_MODE1)		/*  mcspi2_somi */
-			0x7a (PIN_INPUT | MUX_MODE1)		/*  mcspi2_cs */
-			0x7c (PIN_INPUT | MUX_MODE1)		/*  mcspi2_simo */
-			0x7e (PIN_INPUT | MUX_MODE1)		/*  mcspi2_clk */
+			0x78 (PIN_INPUT | MUX_MODE1)		/*  mcspi3_somi */
+			0x7a (PIN_INPUT | MUX_MODE1)		/*  mcspi3_cs0 */
+			0x7c (PIN_INPUT | MUX_MODE1)		/*  mcspi3_simo */
+			0x7e (PIN_INPUT | MUX_MODE1)		/*  mcspi3_clk */
 		>;
 	};
 
 	mcspi4_pins: pinmux_mcspi4_pins {
 		pinctrl-single,pins = <
-			0x164 (PIN_INPUT | MUX_MODE1)		/*  mcspi2_clk */
-			0x168 (PIN_INPUT | MUX_MODE1)		/*  mcspi2_simo */
-			0x16a (PIN_INPUT | MUX_MODE1)		/*  mcspi2_somi */
-			0x16c (PIN_INPUT | MUX_MODE1)		/*  mcspi2_cs */
+			0x164 (PIN_INPUT | MUX_MODE1)		/*  mcspi4_clk */
+			0x168 (PIN_INPUT | MUX_MODE1)		/*  mcspi4_simo */
+			0x16a (PIN_INPUT | MUX_MODE1)		/*  mcspi4_somi */
+			0x16c (PIN_INPUT | MUX_MODE1)		/*  mcspi4_cs0 */
 		>;
 	};
 
@@ -271,6 +239,14 @@
 		reg = <0x48>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
+		ti,system-power-controller;
+
+		extcon_usb3: palmas_usb {
+			compatible = "ti,palmas-usb-vid";
+			ti,enable-vbus-detection;
+			ti,enable-id-detection;
+			ti,wakeup;
+		};
 
 		palmas_pmic {
 			compatible = "ti,palmas-pmic";
@@ -334,15 +310,22 @@
 					ti,smps-range = <0x80>;
 				};
 
-				smps10_reg: smps10 {
+				smps10_out2_reg: smps10_out2 {
 					/* VBUS_5V_OTG */
-					regulator-name = "smps10";
+					regulator-name = "smps10_out2";
 					regulator-min-microvolt = <5000000>;
 					regulator-max-microvolt = <5000000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};
 
+				smps10_out1_reg: smps10_out1 {
+					/* VBUS_5V_OTG */
+					regulator-name = "smps10_out1";
+					regulator-min-microvolt = <5000000>;
+					regulator-max-microvolt = <5000000>;
+				};
+
 				ldo1_reg: ldo1 {
 					/* VDDAPHY_CAM: vdda_csiport */
 					regulator-name = "ldo1";
@@ -470,6 +453,11 @@
 	phys = <0 &hsusb2_phy &hsusb3_phy>;
 };
 
+&usb3 {
+	extcon = <&extcon_usb3>;
+	vbus-supply = <&smps10_out1_reg>;
+};
+
 &mcspi1 {
 
 };
@@ -503,3 +491,7 @@
         pinctrl-names = "default";
         pinctrl-0 = <&uart5_pins>;
 };
+
+&cpu0 {
+	cpu0-supply = <&smps123_reg>;
+};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index e643620..fc3fad5 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -21,6 +21,11 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		i2c4 = &i2c5;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -33,10 +38,17 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x0>;
+
+			operating-points = <
+				/* kHz    uV */
+				500000  880000
+				1000000 1060000
+				1500000 1250000
+			>;
 		};
 		cpu@1 {
 			device_type = "cpu";
@@ -52,7 +64,6 @@
 			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
-		clock-frequency = <6144000>;
 	};
 
 	gic: interrupt-controller@48211000 {
@@ -276,6 +287,12 @@
 			ti,hwmods = "i2c5";
 		};
 
+		hwspinlock: spinlock@4a0f6000 {
+			compatible = "ti,omap4-hwspinlock";
+			reg = <0x4a0f6000 0x1000>;
+			ti,hwmods = "spinlock";
+		};
+
 		mcspi1: spi@48098000 {
 			compatible = "ti,omap4-mcspi";
 			reg = <0x48098000 0x200>;
@@ -604,9 +621,10 @@
 			ti,hwmods = "wd_timer2";
 		};
 
-		emif1: emif@0x4c000000 {
+		emif1: emif@4c000000 {
 			compatible	= "ti,emif-4d5";
 			ti,hwmods	= "emif1";
+			ti,no-idle-on-init;
 			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
 			reg = <0x4c000000 0x400>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
@@ -615,9 +633,10 @@
 			hw-caps-temp-alert;
 		};
 
-		emif2: emif@0x4d000000 {
+		emif2: emif@4d000000 {
 			compatible	= "ti,emif-4d5";
 			ti,hwmods	= "emif2";
+			ti,no-idle-on-init;
 			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
 			reg = <0x4d000000 0x400>;
 			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
@@ -626,42 +645,48 @@
 			hw-caps-temp-alert;
 		};
 
-		omap_control_usb: omap-control-usb@4a002300 {
-			compatible = "ti,omap-control-usb";
-			reg = <0x4a002300 0x4>,
-			      <0x4a002370 0x4>;
-			reg-names = "control_dev_conf", "phy_power_usb";
-			ti,type = <2>;
+		omap_control_usb2phy: control-phy@4a002300 {
+			compatible = "ti,control-phy-usb2";
+			reg = <0x4a002300 0x4>;
+			reg-names = "power";
+		};
+
+		omap_control_usb3phy: control-phy@4a002370 {
+			compatible = "ti,control-phy-pipe3";
+			reg = <0x4a002370 0x4>;
+			reg-names = "power";
 		};
 
-		omap_dwc3@4a020000 {
+		usb3: omap_dwc3@4a020000 {
 			compatible = "ti,dwc3";
 			ti,hwmods = "usb_otg_ss";
-			reg = <0x4a020000 0x1000>;
+			reg = <0x4a020000 0x10000>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			utmi-mode = <2>;
 			ranges;
 			dwc3@4a030000 {
-				compatible = "synopsys,dwc3";
-				reg = <0x4a030000 0x1000>;
+				compatible = "snps,dwc3";
+				reg = <0x4a030000 0x10000>;
 				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 				usb-phy = <&usb2_phy>, <&usb3_phy>;
+				dr_mode = "peripheral";
 				tx-fifo-resize;
 			};
 		};
 
-		ocp2scp {
+		ocp2scp@4a080000 {
 			compatible = "ti,omap-ocp2scp";
 			#address-cells = <1>;
 			#size-cells = <1>;
+			reg = <0x4a080000 0x20>;
 			ranges;
 			ti,hwmods = "ocp2scp1";
 			usb2_phy: usb2phy@4a084000 {
 				compatible = "ti,omap-usb2";
 				reg = <0x4a084000 0x7c>;
-				ctrl-module = <&omap_control_usb>;
+				ctrl-module = <&omap_control_usb2phy>;
 			};
 
 			usb3_phy: usb3phy@4a084400 {
@@ -670,7 +695,7 @@
 				      <0x4a084800 0x64>,
 				      <0x4a084c00 0x40>;
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				ctrl-module = <&omap_control_usb>;
+				ctrl-module = <&omap_control_usb3phy>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
index 0077fc8..aed83de 100644
--- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
+++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
@@ -53,3 +53,20 @@
 		};
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		device-type = "ethernet-phy";
+		reg = <8>;
+	};
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
index 892c64e..e06c37e 100644
--- a/arch/arm/boot/dts/orion5x.dtsi
+++ b/arch/arm/boot/dts/orion5x.dtsi
@@ -16,11 +16,12 @@
 	aliases {
 		gpio0 = &gpio0;
 	};
+
 	intc: interrupt-controller {
-		compatible = "marvell,orion-intc", "marvell,intc";
+		compatible = "marvell,orion-intc";
 		interrupt-controller;
 		#interrupt-cells = <1>;
-		reg = <0xf1020204 0x04>;
+		reg = <0xf1020200 0x08>;
 	};
 
 	ocp@f1000000 {
@@ -132,5 +133,34 @@
 			interrupts = <28>;
 			status = "okay";
 		};
+
+		mdio: mdio-bus@72004 {
+			compatible = "marvell,orion-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x72004 0x84>;
+			interrupts = <22>;
+			status = "disabled";
+
+			/* add phy nodes in board file */
+		};
+
+		eth: ethernet-controller@72000 {
+			compatible = "marvell,orion-eth";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x72000 0x4000>;
+			marvell,tx-checksum-limit = <1600>;
+			status = "disabled";
+
+			ethernet-port@0 {
+				device_type = "network";
+				compatible = "marvell,orion-eth-port";
+				reg = <0>;
+				/* overwrite MAC address in bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+				/* set phy-handle property in board file */
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi
index bbeb623..7cf78af 100644
--- a/arch/arm/boot/dts/prima2.dtsi
+++ b/arch/arm/boot/dts/prima2.dtsi
@@ -76,6 +76,11 @@
 				compatible = "sirf,prima2-rsc";
 				reg = <0x88020000 0x1000>;
 			};
+
+			cphifbg@88030000 {
+				compatible = "sirf,prima2-cphifbg";
+				reg = <0x88030000 0x1000>;
+			};
 		};
 
 		mem-iobg {
@@ -86,10 +91,17 @@
 
 			memory-controller@90000000 {
 				compatible = "sirf,prima2-memc";
-				reg = <0x90000000 0x10000>;
+				reg = <0x90000000 0x2000>;
 				interrupts = <27>;
 				clocks = <&clks 5>;
 			};
+
+			memc-monitor {
+				compatible = "sirf,prima2-memcmon";
+				reg = <0x90002000 0x200>;
+				interrupts = <4>;
+				clocks = <&clks 32>;
+			};
 		};
 
 		disp-iobg {
@@ -171,7 +183,8 @@
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0xb0000000 0xb0000000 0x180000>;
+			ranges = <0xb0000000 0xb0000000 0x180000>,
+			       <0x56000000 0x56000000 0x1b00000>;
 
 			timer@b0020000 {
 				compatible = "sirf,prima2-tick";
@@ -196,25 +209,32 @@
 			uart0: uart@b0050000 {
 				cell-index = <0>;
 				compatible = "sirf,prima2-uart";
-				reg = <0xb0050000 0x10000>;
+				reg = <0xb0050000 0x1000>;
 				interrupts = <17>;
+				fifosize = <128>;
 				clocks = <&clks 13>;
+				sirf,uart-dma-rx-channel = <21>;
+				sirf,uart-dma-tx-channel = <2>;
 			};
 
 			uart1: uart@b0060000 {
 				cell-index = <1>;
 				compatible = "sirf,prima2-uart";
-				reg = <0xb0060000 0x10000>;
+				reg = <0xb0060000 0x1000>;
 				interrupts = <18>;
+				fifosize = <32>;
 				clocks = <&clks 14>;
 			};
 
 			uart2: uart@b0070000 {
 				cell-index = <2>;
 				compatible = "sirf,prima2-uart";
-				reg = <0xb0070000 0x10000>;
+				reg = <0xb0070000 0x1000>;
 				interrupts = <19>;
+				fifosize = <128>;
 				clocks = <&clks 15>;
+				sirf,uart-dma-rx-channel = <6>;
+				sirf,uart-dma-tx-channel = <7>;
 			};
 
 			usp0: usp@b0080000 {
@@ -222,7 +242,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0080000 0x10000>;
 				interrupts = <20>;
+				fifosize = <128>;
 				clocks = <&clks 28>;
+				sirf,usp-dma-rx-channel = <17>;
+				sirf,usp-dma-tx-channel = <18>;
 			};
 
 			usp1: usp@b0090000 {
@@ -230,7 +253,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0090000 0x10000>;
 				interrupts = <21>;
+				fifosize = <128>;
 				clocks = <&clks 29>;
+				sirf,usp-dma-rx-channel = <14>;
+				sirf,usp-dma-tx-channel = <15>;
 			};
 
 			usp2: usp@b00a0000 {
@@ -238,7 +264,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb00a0000 0x10000>;
 				interrupts = <22>;
+				fifosize = <128>;
 				clocks = <&clks 30>;
+				sirf,usp-dma-rx-channel = <10>;
+				sirf,usp-dma-tx-channel = <11>;
 			};
 
 			dmac0: dma-controller@b00b0000 {
@@ -261,6 +290,8 @@
 				compatible = "sirf,prima2-vip";
 				reg = <0xb00C0000 0x10000>;
 				clocks = <&clks 31>;
+				interrupts = <14>;
+				sirf,vip-dma-rx-channel = <16>;
 			};
 
 			spi0: spi@b00d0000 {
@@ -268,7 +299,13 @@
 				compatible = "sirf,prima2-spi";
 				reg = <0xb00d0000 0x10000>;
 				interrupts = <15>;
+				sirf,spi-num-chipselects = <1>;
+				sirf,spi-dma-rx-channel = <25>;
+				sirf,spi-dma-tx-channel = <20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&clks 19>;
+				status = "disabled";
 			};
 
 			spi1: spi@b0170000 {
@@ -276,7 +313,13 @@
 				compatible = "sirf,prima2-spi";
 				reg = <0xb0170000 0x10000>;
 				interrupts = <16>;
+				sirf,spi-num-chipselects = <1>;
+				sirf,spi-dma-rx-channel = <12>;
+				sirf,spi-dma-tx-channel = <13>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&clks 20>;
+				status = "disabled";
 			};
 
 			i2c0: i2c@b00e0000 {
@@ -285,6 +328,8 @@
 				reg = <0xb00e0000 0x10000>;
 				interrupts = <24>;
 				clocks = <&clks 17>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 			};
 
 			i2c1: i2c@b00f0000 {
@@ -293,6 +338,8 @@
 				reg = <0xb00f0000 0x10000>;
 				interrupts = <25>;
 				clocks = <&clks 18>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 			};
 
 			tsc@b0110000 {
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
index f9d92da..83bb0ef 100644
--- a/arch/arm/boot/dts/pxa3xx.dtsi
+++ b/arch/arm/boot/dts/pxa3xx.dtsi
@@ -28,5 +28,16 @@
 			marvell,intc-priority;
 			marvell,intc-nr-irqs = <56>;
 		};
+
+		gpio: gpio@40e00000 {
+			compatible = "intel,pxa3xx-gpio";
+			reg = <0x40e00000 0x10000>;
+			interrupt-names = "gpio0", "gpio1", "gpio_mux";
+			interrupts = <8 9 10>;
+			gpio-controller;
+			#gpio-cells = <0x2>;
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
index cdc010e..386d428 100644
--- a/arch/arm/boot/dts/msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
@@ -38,7 +38,7 @@
 	};
 
 	serial@19c40000 {
-		compatible = "qcom,msm-hsuart", "qcom,msm-uart";
+		compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 		reg = <0x19c40000 0x1000>,
 		      <0x19c00000 0x1000>;
 		interrupts = <0 195 0x0>;
diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index 9c1167b0..93e9f7e 100644
--- a/arch/arm/boot/dts/msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -38,7 +38,7 @@
 	};
 
 	serial@16440000 {
-		compatible = "qcom,msm-hsuart", "qcom,msm-uart";
+		compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 		reg = <0x16440000 0x1000>,
 		      <0x16400000 0x1000>;
 		interrupts = <0 154 0x0>;
diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts
new file mode 100644
index 0000000..1fb20f2
--- /dev/null
+++ b/arch/arm/boot/dts/r7s72100-genmai.dts
@@ -0,0 +1,31 @@
+/*
+ * Device Tree Source for the Genmai board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "r7s72100.dtsi"
+
+/ {
+	model = "Genmai";
+	compatible = "renesas,genmai", "renesas,r7s72100";
+
+	chosen {
+		bootargs = "console=ttySC2,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x08000000 0x08000000>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
new file mode 100644
index 0000000..46b82aa
--- /dev/null
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -0,0 +1,36 @@
+/*
+ * Device Tree Source for the r7s72100 SoC
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+	compatible = "renesas,r7s72100";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+	};
+
+	gic: interrupt-controller@e8201000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0xe8201000 0x1000>,
+			<0xe8202000 0x1000>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
new file mode 100644
index 0000000..9443e93
--- /dev/null
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
@@ -0,0 +1,138 @@
+/*
+ * Device Tree Source for the APE6EVM board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "r8a73a4.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "APE6EVM";
+	compatible = "renesas,ape6evm-reference", "renesas,r8a73a4";
+
+	chosen {
+		bootargs = "console=ttySC0,115200 ignore_loglevel rw";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	vcc_mmc0: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "MMC0 Vcc";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	vcc_sdhi0: regulator@1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pfc 76 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	/* Common 3.3V rail, used by several devices on APE6EVM */
+	ape6evm_fixed_3v3: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	lbsc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x80000000>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	vdd_dvfs: max8973@1b {
+		compatible = "maxim,max8973";
+		reg = <0x1b>;
+
+		regulator-min-microvolt = <935000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_dvfs>;
+	operating-points = <
+		/* kHz  uV */
+		1950000 1115000
+		1462500  995000
+	>;
+	voltage-tolerance = <1>; /* 1% */
+};
+
+&pfc {
+	pinctrl-0 = <&scifa0_pins>;
+	pinctrl-names = "default";
+
+	scifa0_pins: scifa0 {
+		renesas,groups = "scifa0_data";
+		renesas,function = "scifa0";
+	};
+
+	mmc0_pins: mmcif {
+		renesas,groups = "mmc0_data8", "mmc0_ctrl";
+		renesas,function = "mmc0";
+	};
+
+	sdhi0_pins: sdhi0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
+		renesas,function = "sdhi0";
+	};
+
+	sdhi1_pins: sdhi1 {
+		renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
+		renesas,function = "sdhi1";
+	};
+};
+
+&mmcif0 {
+	vmmc-supply = <&vcc_mmc0>;
+	bus-width = <8>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	status = "okay";
+};
+
+&sdhi0 {
+	vmmc-supply = <&vcc_sdhi0>;
+	bus-width = <4>;
+	toshiba,mmc-wrprotect-disable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhi0_pins>;
+	status = "okay";
+};
+
+&sdhi1 {
+	vmmc-supply = <&ape6evm_fixed_3v3>;
+	bus-width = <4>;
+	broken-cd;
+	toshiba,mmc-wrprotect-disable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhi1_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index f603c69..91436b5 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -16,7 +16,7 @@
 	compatible = "renesas,ape6evm", "renesas,r8a73a4";
 
 	chosen {
-		bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp";
+		bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
 	};
 
 	memory@40000000 {
@@ -50,3 +50,26 @@
 		};
 	};
 };
+
+&i2c5 {
+	status = "okay";
+	vdd_dvfs: max8973@1b {
+		compatible = "maxim,max8973";
+		reg = <0x1b>;
+
+		regulator-min-microvolt = <935000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_dvfs>;
+	operating-points = <
+		/* kHz  uV */
+		1950000 1115000
+		1462500  995000
+	>;
+	voltage-tolerance = <1>; /* 1% */
+};
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 4ff2019..287e047 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -78,6 +78,49 @@
 				<0 56 4>, <0 57 4>;
 	};
 
+	dmac: dma-multiplexer@0 {
+		compatible = "renesas,shdma-mux";
+		#dma-cells = <1>;
+		dma-channels = <20>;
+		dma-requests = <256>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dma0: dma-controller@e6700020 {
+			compatible = "renesas,shdma-r8a73a4";
+			reg = <0 0xe6700020 0 0x89e0>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 220 4
+					0 200 4
+					0 201 4
+					0 202 4
+					0 203 4
+					0 204 4
+					0 205 4
+					0 206 4
+					0 207 4
+					0 208 4
+					0 209 4
+					0 210 4
+					0 211 4
+					0 212 4
+					0 213 4
+					0 214 4
+					0 215 4
+					0 216 4
+					0 217 4
+					0 218 4
+					0 219 4>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15",
+					"ch16", "ch17", "ch18", "ch19";
+		};
+	};
+
 	thermal@e61f0000 {
 		compatible = "renesas,rcar-thermal";
 		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
@@ -85,4 +128,146 @@
 		interrupt-parent = <&gic>;
 		interrupts = <0 69 4>;
 	};
+
+	i2c0: i2c@e6500000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6500000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 174 0x4>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@e6510000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6510000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 175 0x4>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@e6520000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6520000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 176 0x4>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@e6530000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6530000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 177 0x4>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@e6540000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6540000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 178 0x4>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@e60b0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe60b0000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 179 0x4>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@e6550000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6550000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 184 0x4>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@e6560000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6560000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 185 0x4>;
+		status = "disabled";
+	};
+
+	i2c8: i2c@e6570000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6570000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 173 0x4>;
+		status = "disabled";
+	};
+
+	mmcif0: mmcif@ee200000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0 0xee200000 0 0x80>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 169 0x4>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	mmcif1: mmcif@ee220000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0 0xee220000 0 0x80>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 170 0x4>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	pfc: pfc@e6050000 {
+		compatible = "renesas,pfc-r8a73a4";
+		reg = <0 0xe6050000 0 0x9000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	sdhi0: sdhi@ee100000 {
+		compatible = "renesas,sdhi-r8a73a4";
+		reg = <0 0xee100000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 165 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi1: sdhi@ee120000 {
+		compatible = "renesas,sdhi-r8a73a4";
+		reg = <0 0xee120000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 166 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi2: sdhi@ee140000 {
+		compatible = "renesas,sdhi-r8a73a4";
+		reg = <0 0xee140000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 167 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
index 09ea22c..1c56c5e 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
@@ -10,13 +10,15 @@
 
 /dts-v1/;
 /include/ "r8a7740.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "armadillo 800 eva reference";
 	compatible = "renesas,armadillo800eva-reference", "renesas,r8a7740";
 
 	chosen {
-		bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw";
+		bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
 	};
 
 	memory {
@@ -33,13 +35,123 @@
 		regulator-boot-on;
 	};
 
+	vcc_sdhi0: regulator@1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pfc 75 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator@2 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sdhi0>;
+
+		enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
+		gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
+		states = <3300000 0
+			  1800000 1>;
+
+		enable-active-high;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
+		};
+		led2 {
+			gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
+		};
+		led3 {
+			gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
+		};
+		led4 {
+			gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
+		default-brightness-level = <9>;
+		pinctrl-0 = <&backlight_pins>;
+		pinctrl-names = "default";
+	};
 };
 
 &i2c0 {
+	status = "okay";
 	touchscreen: st1232@55 {
 		compatible = "sitronix,st1232";
 		reg = <0x55>;
 		interrupt-parent = <&irqpin1>;
 		interrupts = <2 0>; /* IRQ10: hwirq 2 on irqpin1 */
+		pinctrl-0 = <&st1232_pins>;
+		pinctrl-names = "default";
+		gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pfc {
+	pinctrl-0 = <&scifa1_pins>;
+	pinctrl-names = "default";
+
+	scifa1_pins: scifa1 {
+		renesas,groups = "scifa1_data";
+		renesas,function = "scifa1";
+	};
+
+	st1232_pins: st1232 {
+		renesas,groups = "intc_irq10";
+		renesas,function = "intc";
+	};
+
+	backlight_pins: backlight {
+		renesas,groups = "tpu0_to2_1";
+		renesas,function = "tpu0";
+	};
+
+	mmc0_pins: mmc0 {
+		renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1";
+		renesas,function = "mmc0";
+	};
+
+	sdhi0_pins: sdhi0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp";
+		renesas,function = "sdhi0";
 	};
 };
+
+&tpu {
+	status = "okay";
+};
+
+&mmcif0 {
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	bus-width = <4>;
+	cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index 93da655..426cd9c 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -16,7 +16,7 @@
 	compatible = "renesas,armadillo800eva";
 
 	chosen {
-		bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw";
+		bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 24e9306..ae1e230 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -32,6 +32,11 @@
 		      <0xc2000000 0x1000>;
 	};
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 83 4>;
+	};
+
 	/* irqpin0: IRQ0 - IRQ7 */
 	irqpin0: irqpin@e6900000 {
 		compatible = "renesas,intc-irqpin";
@@ -126,6 +131,7 @@
 			      0 202 0x4
 			      0 203 0x4
 			      0 204 0x4>;
+		status = "disabled";
 	};
 
 	i2c1: i2c@e6c20000 {
@@ -138,5 +144,54 @@
 			      0 71 0x4
 			      0 72 0x4
 			      0 73 0x4>;
+		status = "disabled";
+	};
+
+	pfc: pfc@e6050000 {
+		compatible = "renesas,pfc-r8a7740";
+		reg = <0xe6050000 0x8000>,
+		      <0xe605800c 0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	tpu: pwm@e6600000 {
+		compatible = "renesas,tpu-r8a7740", "renesas,tpu";
+		reg = <0xe6600000 0x100>;
+		status = "disabled";
+		#pwm-cells = <3>;
+	};
+
+	mmcif0: mmcif@e6bd0000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0xe6bd0000 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 56 4
+				0 57 4>;
+		status = "disabled";
+	};
+
+	sdhi0: sdhi@e6850000 {
+		compatible = "renesas,sdhi-r8a7740";
+		reg = <0xe6850000 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 117 4
+				0 118 4
+				0 119 4>;
+		cap-sd-highspeed;
+		cap-sdio-irq;
+		status = "disabled";
+	};
+
+	sdhi1: sdhi@e6860000 {
+		compatible = "renesas,sdhi-r8a7740";
+		reg = <0xe6860000 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 121 4
+				0 122 4
+				0 123 4>;
+		cap-sd-highspeed;
+		cap-sdio-irq;
+		status = "disabled";
 	};
 };
diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts
new file mode 100644
index 0000000..969e386
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7778-bockw-reference.dts
@@ -0,0 +1,57 @@
+/*
+ * Reference Device Tree Source for the Bock-W board
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * based on r8a7779
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Simon Horman
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "r8a7778.dtsi"
+
+/ {
+	model = "bockw";
+	compatible = "renesas,bockw-reference", "renesas,r8a7778";
+
+	chosen {
+		bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x10000000>;
+	};
+
+	fixedregulator3v3: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ethernet@18300000 {
+		compatible = "smsc,lan9220", "smsc,lan9115";
+		reg = <0x18300000 0x1000>;
+
+		phy-mode = "mii";
+		interrupt-parent = <&irqpin>;
+		interrupts = <0 0>; /* IRQ0: hwirq 0 on irqpin */
+		reg-io-width = <4>;
+		vddvario-supply = <&fixedregulator3v3>;
+		vdd33a-supply = <&fixedregulator3v3>;
+	};
+};
+
+&irqpin {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
index 0076b1e..12bbebc 100644
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw.dts
@@ -22,7 +22,7 @@
 	compatible = "renesas,bockw", "renesas,r8a7778";
 
 	chosen {
-		bootargs = "console=ttySC0,115200 ignore_loglevel ip=dhcp root=/dev/nfs";
+		bootargs = "console=ttySC0,115200 ignore_loglevel ip=dhcp root=/dev/nfs rw";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 4743735..a6308a3 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -32,4 +32,88 @@
 		reg = <0xfe438000 0x1000>,
 		      <0xfe430000 0x100>;
 	};
+
+	/* irqpin: IRQ0 - IRQ3 */
+	irqpin: irqpin@fe78001c {
+		compatible = "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		status = "disabled"; /* default off */
+		reg =	<0xfe78001c 4>,
+			<0xfe780010 4>,
+			<0xfe780024 4>,
+			<0xfe780044 4>,
+			<0xfe780064 4>;
+		interrupt-parent = <&gic>;
+		interrupts =   <0 27 0x4
+				0 28 0x4
+				0 29 0x4
+				0 30 0x4>;
+		sense-bitfield-width = <2>;
+	};
+
+	gpio0: gpio@ffc40000 {
+		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+		reg = <0xffc40000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 103 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 0 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio1: gpio@ffc41000 {
+		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+		reg = <0xffc41000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 103 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 32 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio2: gpio@ffc42000 {
+		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+		reg = <0xffc42000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 103 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 64 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio3: gpio@ffc43000 {
+		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+		reg = <0xffc43000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 103 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 96 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio4: gpio@ffc44000 {
+		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+		reg = <0xffc44000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 103 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 128 27>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	pfc: pfc@fffc0000 {
+		compatible = "renesas,pfc-r8a7778";
+		reg = <0xfffc000 0x118>;
+	};
 };
diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts
index 72be4c8..ab4110a 100644
--- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen-reference.dts
@@ -11,13 +11,14 @@
 
 /dts-v1/;
 /include/ "r8a7779.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "marzen";
 	compatible = "renesas,marzen-reference", "renesas,r8a7779";
 
 	chosen {
-		bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on";
+		bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on rw";
 	};
 
 	memory {
@@ -37,11 +38,63 @@
 	lan0@18000000 {
 		compatible = "smsc,lan9220", "smsc,lan9115";
 		reg = <0x18000000 0x100>;
+		pinctrl-0 = <&lan0_pins>;
+		pinctrl-names = "default";
+
 		phy-mode = "mii";
-		interrupt-parent = <&gic>;
-		interrupts = <0 28 0x4>;
+		interrupt-parent = <&irqpin0>;
+		interrupts = <1 0>; /* IRQ1: hwirq 1 on irqpin0 */
 		reg-io-width = <4>;
 		vddvario-supply = <&fixedregulator3v3>;
 		vdd33a-supply = <&fixedregulator3v3>;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		led2 {
+			gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		};
+		led3 {
+			gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		};
+		led4 {
+			gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&irqpin0 {
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif2_pins &scif4_pins &sdhi0_pins>;
+	pinctrl-names = "default";
+
+	lan0_pins: lan0 {
+		intc {
+			renesas,groups = "intc_irq1_b";
+			renesas,function = "intc";
+		};
+		lbsc {
+			renesas,groups = "lbsc_ex_cs0";
+			renesas,function = "lbsc";
+		};
+	};
+
+	scif2_pins: scif2 {
+		renesas,groups = "scif2_data_c";
+		renesas,function = "scif2";
+	};
+
+	scif4_pins: scif4 {
+		renesas,groups = "scif4_data";
+		renesas,function = "scif4";
+	};
+
+	sdhi0_pins: sdhi0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd",
+				 "sdhi0_wp";
+		renesas,function = "sdhi0";
+	};
 };
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
new file mode 100644
index 0000000..f3f7f79
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -0,0 +1,27 @@
+/*
+ * Device Tree Source for the Marzen board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Simon Horman
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "r8a7779.dtsi"
+
+/ {
+	model = "marzen";
+	compatible = "renesas,marzen", "renesas,r8a7779";
+
+	chosen {
+		bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 7f146c6..19faeac 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -48,9 +48,94 @@
                       <0xf0000100 0x100>;
         };
 
+	gpio0: gpio@ffc40000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		reg = <0xffc40000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 141 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 0 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio1: gpio@ffc41000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		reg = <0xffc41000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 142 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 32 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio2: gpio@ffc42000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		reg = <0xffc42000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 143 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 64 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio3: gpio@ffc43000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		reg = <0xffc43000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 144 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 96 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio4: gpio@ffc44000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		reg = <0xffc44000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 145 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 128 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio5: gpio@ffc45000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		reg = <0xffc45000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 146 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 160 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio6: gpio@ffc46000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		reg = <0xffc46000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 147 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 192 9>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
 	irqpin0: irqpin@fe780010 {
 		compatible = "renesas,intc-irqpin";
 		#interrupt-cells = <2>;
+		status = "disabled";
 		interrupt-controller;
 		reg = <0xfe78001c 4>,
 			<0xfe780010 4>,
@@ -65,40 +150,49 @@
 		sense-bitfield-width = <2>;
 	};
 
-	i2c0: i2c@0xffc70000 {
+	i2c0: i2c@ffc70000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "renesas,rmobile-iic";
 		reg = <0xffc70000 0x1000>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 79 0x4>;
+		status = "disabled";
 	};
 
-	i2c1: i2c@0xffc71000 {
+	i2c1: i2c@ffc71000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "renesas,rmobile-iic";
 		reg = <0xffc71000 0x1000>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 82 0x4>;
+		status = "disabled";
 	};
 
-	i2c2: i2c@0xffc72000 {
+	i2c2: i2c@ffc72000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "renesas,rmobile-iic";
 		reg = <0xffc72000 0x1000>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 80 0x4>;
+		status = "disabled";
 	};
 
-	i2c3: i2c@0xffc73000 {
+	i2c3: i2c@ffc73000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "renesas,rmobile-iic";
 		reg = <0xffc73000 0x1000>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 81 0x4>;
+		status = "disabled";
+	};
+
+	pfc: pfc@fffc0000 {
+		compatible = "renesas,pfc-r8a7779";
+		reg = <0xfffc0000 0x23c>;
 	};
 
 	thermal@ffc48000 {
diff --git a/arch/arm/boot/dts/r8a7790-lager-reference.dts b/arch/arm/boot/dts/r8a7790-lager-reference.dts
new file mode 100644
index 0000000..c462ef1
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7790-lager-reference.dts
@@ -0,0 +1,45 @@
+/*
+ * Device Tree Source for the Lager board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "r8a7790.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Lager";
+	compatible = "renesas,lager-reference", "renesas,r8a7790";
+
+	chosen {
+		bootargs = "console=ttySC6,115200 ignore_loglevel rw";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led6 {
+			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+		};
+		led7 {
+			gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
+		};
+		led8 {
+			gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 09a84fc..203bd08 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -16,7 +16,7 @@
 	compatible = "renesas,lager", "renesas,r8a7790";
 
 	chosen {
-		bootargs = "console=ttySC6,115200 ignore_loglevel";
+		bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
 	};
 
 	memory@40000000 {
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 339d9b1..ee845fa 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -24,6 +24,55 @@
 			reg = <0>;
 			clock-frequency = <1300000000>;
 		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu4: cpu@4 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			clock-frequency = <780000000>;
+		};
+
+		cpu5: cpu@5 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			clock-frequency = <780000000>;
+		};
+
+		cpu6: cpu@6 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			clock-frequency = <780000000>;
+		};
+
+		cpu7: cpu@7 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x103>;
+			clock-frequency = <780000000>;
+		};
 	};
 
 	gic: interrupt-controller@f1001000 {
@@ -38,6 +87,78 @@
 		interrupts = <1 9 0xf04>;
 	};
 
+	gpio0: gpio@ffc40000 {
+		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		reg = <0 0xffc40000 0 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 4 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 0 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio1: gpio@ffc41000 {
+		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		reg = <0 0xffc41000 0 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 5 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 32 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio2: gpio@ffc42000 {
+		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		reg = <0 0xffc42000 0 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 6 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 64 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio3: gpio@ffc43000 {
+		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		reg = <0 0xffc43000 0 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 7 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 96 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio4: gpio@ffc44000 {
+		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		reg = <0 0xffc44000 0 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 8 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 128 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio5: gpio@ffc45000 {
+		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		reg = <0 0xffc45000 0 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 9 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 160 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <1 13 0xf08>,
@@ -54,4 +175,103 @@
 		interrupt-parent = <&gic>;
 		interrupts = <0 0 4>, <0 1 4>, <0 2 4>,	<0 3 4>;
 	};
+
+	i2c0: i2c@e6508000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7790";
+		reg = <0 0xe6508000 0 0x40>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 287 0x4>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@e6518000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7790";
+		reg = <0 0xe6518000 0 0x40>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 288 0x4>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@e6530000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7790";
+		reg = <0 0xe6530000 0 0x40>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 286 0x4>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@e6540000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7790";
+		reg = <0 0xe6540000 0 0x40>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 290 0x4>;
+		status = "disabled";
+	};
+
+	mmcif0: mmcif@ee200000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0 0xee200000 0 0x80>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 169 0x4>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	mmcif1: mmcif@ee220000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0 0xee220000 0 0x80>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 170 0x4>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	pfc: pfc@e6060000 {
+		compatible = "renesas,pfc-r8a7790";
+		reg = <0 0xe6060000 0 0x250>;
+	};
+
+	sdhi0: sdhi@ee100000 {
+		compatible = "renesas,sdhi-r8a7790";
+		reg = <0 0xee100000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 165 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi1: sdhi@ee120000 {
+		compatible = "renesas,sdhi-r8a7790";
+		reg = <0 0xee120000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 166 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi2: sdhi@ee140000 {
+		compatible = "renesas,sdhi-r8a7790";
+		reg = <0 0xee140000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 167 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi3: sdhi@ee160000 {
+		compatible = "renesas,sdhi-r8a7790";
+		reg = <0 0xee160000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 168 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
new file mode 100644
index 0000000..1ce5250
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -0,0 +1,32 @@
+/*
+ * Device Tree Source for the Koelsch board
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "r8a7791.dtsi"
+
+/ {
+	model = "Koelsch";
+	compatible = "renesas,koelsch", "renesas,r8a7791";
+
+	chosen {
+		bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
new file mode 100644
index 0000000..fea5cfe
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -0,0 +1,74 @@
+/*
+ * Device Tree Source for the r8a7791 SoC
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+	compatible = "renesas,r8a7791";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1300000000>;
+		};
+	};
+
+	gic: interrupt-controller@f1001000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0xf1001000 0 0x1000>,
+			<0 0xf1002000 0 0x1000>,
+			<0 0xf1004000 0 0x2000>,
+			<0 0xf1006000 0 0x2000>;
+		interrupts = <1 9 0xf04>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+				<1 14 0xf08>,
+				<1 11 0xf08>,
+				<1 10 0xf08>;
+	};
+
+	irqc0: interrupt-controller@e61c0000 {
+		compatible = "renesas,irqc";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0 0xe61c0000 0 0x200>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 0 4>,
+			      <0 1 4>,
+			      <0 2 4>,
+			      <0 3 4>,
+			      <0 12 4>,
+			      <0 13 4>,
+			      <0 14 4>,
+			      <0 15 4>,
+			      <0 16 4>,
+			      <0 17 4>;
+	};
+};
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
new file mode 100644
index 0000000..035df40
--- /dev/null
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -0,0 +1,109 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "rk3066a.dtsi"
+
+/ {
+	model = "bq Curie 2";
+
+	memory {
+		reg = <0x60000000 0x40000000>;
+	};
+
+	soc {
+		uart0: serial@10124000 {
+			status = "okay";
+		};
+
+		uart1: serial@10126000 {
+			status = "okay";
+		};
+
+		uart2: serial@20064000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_xfer>;
+			status = "okay";
+		};
+
+		uart3: serial@20068000 {
+			status = "okay";
+		};
+
+		vcc_sd0: fixed-regulator {
+			compatible = "regulator-fixed";
+			regulator-name = "sdmmc-supply";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
+			startup-delay-us = <100000>;
+		};
+
+		dwmmc@10214000 { /* sdmmc */
+			num-slots = <1>;
+			status = "okay";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
+			vmmc-supply = <&vcc_sd0>;
+
+			slot@0 {
+				reg = <0>;
+				bus-width = <4>;
+				disable-wp;
+			};
+		};
+
+		dwmmc@10218000 { /* wifi */
+			num-slots = <1>;
+			status = "okay";
+			non-removable;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
+
+			slot@0 {
+				reg = <0>;
+				bus-width = <4>;
+				disable-wp;
+			};
+		};
+
+		gpio-keys {
+			compatible = "gpio-keys";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			autorepeat;
+
+			button@0 {
+				gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
+				linux,code = <116>;
+				label = "GPIO Key Power";
+				linux,input-type = <1>;
+				gpio-key,wakeup = <1>;
+				debounce-interval = <100>;
+			};
+			button@1 {
+				gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
+				linux,code = <104>;
+				label = "GPIO Key Vol-";
+				linux,input-type = <1>;
+				gpio-key,wakeup = <0>;
+				debounce-interval = <100>;
+			};
+			/* VOL+ comes somehow thru the ADC */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 56bfac9..be5d2b0 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -14,15 +14,12 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/rockchip.h>
-#include "skeleton.dtsi"
+#include "rk3xxx.dtsi"
 #include "rk3066a-clocks.dtsi"
 
 / {
 	compatible = "rockchip,rk3066a";
-	interrupt-parent = <&gic>;
 
 	cpus {
 		#address-cells = <1>;
@@ -43,33 +40,6 @@
 	};
 
 	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-
-		gic: interrupt-controller@1013d000 {
-			compatible = "arm,cortex-a9-gic";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x1013d000 0x1000>,
-			      <0x1013c100 0x0100>;
-		};
-
-		L2: l2-cache-controller@10138000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x10138000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		local-timer@1013c600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x1013c600 0x20>;
-			interrupts = <GIC_PPI 13 0x304>;
-			clocks = <&dummy150m>;
-		};
-
 		timer@20038000 {
 			compatible = "snps,dw-apb-timer-osc";
 			reg = <0x20038000 0x100>;
@@ -191,17 +161,14 @@
 				uart0_xfer: uart0-xfer {
 					rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart0_cts: uart0-cts {
 					rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart0_rts: uart0-rts {
 					rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 			};
 
@@ -209,17 +176,14 @@
 				uart1_xfer: uart1-xfer {
 					rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart1_cts: uart1-cts {
 					rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart1_rts: uart1-rts {
 					rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 			};
 
@@ -227,7 +191,6 @@
 				uart2_xfer: uart2-xfer {
 					rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 				/* no rts / cts for uart2 */
 			};
@@ -236,44 +199,36 @@
 				uart3_xfer: uart3-xfer {
 					rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart3_cts: uart3-cts {
 					rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart3_rts: uart3-rts {
 					rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 			};
 
 			sd0 {
 				sd0_clk: sd0-clk {
 					rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd0_cmd: sd0-cmd {
 					rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd0_cd: sd0-cd {
 					rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd0_wp: sd0-wp {
 					rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd0_bus1: sd0-bus-width1 {
 					rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd0_bus4: sd0-bus-width4 {
@@ -281,34 +236,28 @@
 							<RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 			};
 
 			sd1 {
 				sd1_clk: sd1-clk {
 					rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd1_cmd: sd1-cmd {
 					rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd1_cd: sd1-cd {
 					rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd1_wp: sd1-wp {
 					rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd1_bus1: sd1-bus-width1 {
 					rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd1_bus4: sd1-bus-width4 {
@@ -316,75 +265,8 @@
 							<RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 			};
 		};
-
-		uart0: serial@10124000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x10124000 0x400>;
-			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <1>;
-			clocks = <&clk_gates1 8>;
-			status = "disabled";
-		};
-
-		uart1: serial@10126000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x10126000 0x400>;
-			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <1>;
-			clocks = <&clk_gates1 10>;
-			status = "disabled";
-		};
-
-		uart2: serial@20064000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x20064000 0x400>;
-			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <1>;
-			clocks = <&clk_gates1 12>;
-			status = "disabled";
-		};
-
-		uart3: serial@20068000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x20068000 0x400>;
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <1>;
-			clocks = <&clk_gates1 14>;
-			status = "disabled";
-		};
-
-		dwmmc@10214000 {
-			compatible = "rockchip,rk2928-dw-mshc";
-			reg = <0x10214000 0x1000>;
-			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			clocks = <&clk_gates5 10>, <&clk_gates2 11>;
-			clock-names = "biu", "ciu";
-
-			status = "disabled";
-		};
-
-		dwmmc@10218000 {
-			compatible = "rockchip,rk2928-dw-mshc";
-			reg = <0x10218000 0x1000>;
-			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			clocks = <&clk_gates5 11>, <&clk_gates2 13>;
-			clock-names = "biu", "ciu";
-
-			status = "disabled";
-		};
 	};
 };
diff --git a/arch/arm/boot/dts/rk3188-clocks.dtsi b/arch/arm/boot/dts/rk3188-clocks.dtsi
new file mode 100644
index 0000000..b1b92dc
--- /dev/null
+++ b/arch/arm/boot/dts/rk3188-clocks.dtsi
@@ -0,0 +1,289 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/ {
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * This is a dummy clock, to be used as placeholder on
+		 * other mux clocks when a specific parent clock is not
+		 * yet implemented. It should be dropped when the driver
+		 * is complete.
+		 */
+		dummy: dummy {
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+			#clock-cells = <0>;
+		};
+
+		xin24m: xin24m {
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			#clock-cells = <0>;
+		};
+
+		dummy48m: dummy48m {
+			compatible = "fixed-clock";
+			clock-frequency = <48000000>;
+			#clock-cells = <0>;
+		};
+
+		dummy150m: dummy150m {
+			compatible = "fixed-clock";
+			clock-frequency = <150000000>;
+			#clock-cells = <0>;
+		};
+
+		clk_gates0: gate-clk@200000d0 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000d0 0x4>;
+			clocks = <&dummy150m>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>;
+
+			clock-output-names =
+				"gate_core_periph", "gate_cpu_gpll",
+				"gate_ddrphy", "gate_aclk_cpu",
+				"gate_hclk_cpu", "gate_pclk_cpu",
+				"gate_atclk_cpu", "gate_aclk_core",
+				"reserved", "gate_i2s0",
+				"gate_i2s0_frac", "reserved",
+				"reserved", "gate_spdif",
+				"gate_spdif_frac", "gate_testclk";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates1: gate-clk@200000d4 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000d4 0x4>;
+			clocks = <&xin24m>, <&xin24m>,
+				 <&xin24m>, <&dummy>,
+				 <&dummy>, <&xin24m>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>;
+
+			clock-output-names =
+				"gate_timer0", "gate_timer1",
+				"gate_timer3", "gate_jtag",
+				"gate_aclk_lcdc1_src", "gate_otgphy0",
+				"gate_otgphy1", "gate_ddr_gpll",
+				"gate_uart0", "gate_frac_uart0",
+				"gate_uart1", "gate_frac_uart1",
+				"gate_uart2", "gate_frac_uart2",
+				"gate_uart3", "gate_frac_uart3";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates2: gate-clk@200000d8 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000d8 0x4>;
+			clocks = <&clk_gates2 1>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&clk_gates2 3>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy48m>,
+				 <&dummy>, <&dummy48m>,
+				 <&dummy>, <&dummy>;
+
+			clock-output-names =
+				"gate_periph_src", "gate_aclk_periph",
+				"gate_hclk_periph", "gate_pclk_periph",
+				"gate_smc", "gate_mac",
+				"gate_hsadc", "gate_hsadc_frac",
+				"gate_saradc", "gate_spi0",
+				"gate_spi1", "gate_mmc0",
+				"gate_mac_lbtest", "gate_mmc1",
+				"gate_emmc", "reserved";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates3: gate-clk@200000dc {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000dc 0x4>;
+			clocks = <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&xin24m>, <&xin24m>,
+				 <&dummy>, <&dummy>,
+				 <&xin24m>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&xin24m>, <&dummy>;
+
+			clock-output-names =
+				"gate_aclk_lcdc0_src", "gate_dclk_lcdc0",
+				"gate_dclk_lcdc1", "gate_pclkin_cif0",
+				"gate_timer2", "gate_timer4",
+				"gate_hsicphy", "gate_cif0_out",
+				"gate_timer5", "gate_aclk_vepu",
+				"gate_hclk_vepu", "gate_aclk_vdpu",
+				"gate_hclk_vdpu", "reserved",
+				"gate_timer6", "gate_aclk_gpu_src";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates4: gate-clk@200000e0 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000e0 0x4>;
+			clocks = <&clk_gates2 2>, <&clk_gates2 3>,
+				 <&clk_gates2 1>, <&clk_gates2 1>,
+				 <&clk_gates2 1>, <&clk_gates2 2>,
+				 <&clk_gates2 2>, <&clk_gates2 2>,
+				 <&clk_gates0 4>, <&clk_gates0 4>,
+				 <&clk_gates0 3>, <&dummy>,
+				 <&clk_gates0 3>, <&dummy>,
+				 <&dummy>, <&dummy>;
+
+			clock-output-names =
+				"gate_hclk_peri_axi_matrix", "gate_pclk_peri_axi_matrix",
+				"gate_aclk_cpu_peri", "gate_aclk_peri_axi_matrix",
+				"gate_aclk_pei_niu", "gate_hclk_usb_peri",
+				"gate_hclk_peri_ahb_arbi", "gate_hclk_emem_peri",
+				"gate_hclk_cpubus", "gate_hclk_ahb2apb",
+				"gate_aclk_strc_sys", "reserved",
+				"gate_aclk_intmem", "reserved",
+				"gate_hclk_imem1", "gate_hclk_imem0";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates5: gate-clk@200000e4 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000e4 0x4>;
+			clocks = <&clk_gates0 3>, <&clk_gates2 1>,
+				 <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates0 4>, <&clk_gates0 5>,
+				 <&clk_gates2 1>, <&clk_gates2 2>,
+				 <&clk_gates2 2>, <&clk_gates2 2>,
+				 <&clk_gates2 2>, <&clk_gates4 5>;
+
+			clock-output-names =
+				"gate_aclk_dmac1", "gate_aclk_dmac2",
+				"gate_pclk_efuse", "gate_pclk_tzpc",
+				"gate_pclk_grf", "gate_pclk_pmu",
+				"gate_hclk_rom", "gate_pclk_ddrupctl",
+				"gate_aclk_smc", "gate_hclk_nandc",
+				"gate_hclk_mmc0", "gate_hclk_mmc1",
+				"gate_hclk_emmc", "gate_hclk_otg0";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates6: gate-clk@200000e8 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000e8 0x4>;
+			clocks = <&clk_gates3 0>, <&clk_gates0 4>,
+				 <&clk_gates0 4>, <&clk_gates1 4>,
+				 <&clk_gates0 4>, <&clk_gates3 0>,
+				 <&dummy>, <&dummy>,
+				 <&clk_gates3 0>, <&clk_gates0 4>,
+				 <&clk_gates0 4>, <&clk_gates1 4>,
+				 <&clk_gates0 4>, <&clk_gates3 0>;
+
+			clock-output-names =
+				"gate_aclk_lcdc0", "gate_hclk_lcdc0",
+				"gate_hclk_lcdc1", "gate_aclk_lcdc1",
+				"gate_hclk_cif0", "gate_aclk_cif0",
+				"reserved", "reserved",
+				"gate_aclk_ipp", "gate_hclk_ipp",
+				"gate_hclk_rga", "gate_aclk_rga",
+				"gate_hclk_vio_bus", "gate_aclk_vio0";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates7: gate-clk@200000ec {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000ec 0x4>;
+			clocks = <&clk_gates2 2>, <&clk_gates0 4>,
+				 <&clk_gates0 4>, <&dummy>,
+				 <&dummy>, <&clk_gates2 2>,
+				 <&clk_gates2 2>, <&clk_gates0 5>,
+				 <&dummy>, <&clk_gates0 5>,
+				 <&clk_gates0 5>, <&clk_gates2 3>,
+				 <&clk_gates2 3>, <&clk_gates2 3>,
+				 <&clk_gates2 3>, <&clk_gates2 3>;
+
+			clock-output-names =
+				"gate_hclk_emac", "gate_hclk_spdif",
+				"gate_hclk_i2s0_2ch", "gate_hclk_otg1",
+				"gate_hclk_hsic", "gate_hclk_hsadc",
+				"gate_hclk_pidf", "gate_pclk_timer0",
+				"reserved", "gate_pclk_timer2",
+				"gate_pclk_pwm01", "gate_pclk_pwm23",
+				"gate_pclk_spi0", "gate_pclk_spi1",
+				"gate_pclk_saradc", "gate_pclk_wdt";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates8: gate-clk@200000f0 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000f0 0x4>;
+			clocks = <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates2 3>, <&clk_gates2 3>,
+				 <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates2 3>, <&clk_gates2 3>,
+				 <&clk_gates2 3>, <&clk_gates0 5>,
+				 <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates2 3>, <&dummy>;
+
+			clock-output-names =
+				"gate_pclk_uart0", "gate_pclk_uart1",
+				"gate_pclk_uart2", "gate_pclk_uart3",
+				"gate_pclk_i2c0", "gate_pclk_i2c1",
+				"gate_pclk_i2c2", "gate_pclk_i2c3",
+				"gate_pclk_i2c4", "gate_pclk_gpio0",
+				"gate_pclk_gpio1", "gate_pclk_gpio2",
+				"gate_pclk_gpio3", "gate_aclk_gps";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates9: gate-clk@200000f4 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000f4 0x4>;
+			clocks = <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>;
+
+			clock-output-names =
+				"gate_clk_core_dbg", "gate_pclk_dbg",
+				"gate_clk_trace", "gate_atclk",
+				"gate_clk_l2c", "gate_aclk_vio1",
+				"gate_pclk_publ", "gate_aclk_gpu";
+
+			#clock-cells = <1>;
+		};
+	};
+
+};
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
new file mode 100644
index 0000000..3ba1968
--- /dev/null
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -0,0 +1,80 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "rk3188.dtsi"
+
+/ {
+	model = "Radxa Rock";
+
+	memory {
+		reg = <0x60000000 0x80000000>;
+	};
+
+	soc {
+		uart0: serial@10124000 {
+			status = "okay";
+		};
+
+		uart1: serial@10126000 {
+			status = "okay";
+		};
+
+		uart2: serial@20064000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_xfer>;
+			status = "okay";
+		};
+
+		uart3: serial@20068000 {
+			status = "okay";
+		};
+
+		gpio-keys {
+			compatible = "gpio-keys";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			autorepeat;
+
+			button@0 {
+				gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+				linux,code = <116>;
+				label = "GPIO Key Power";
+				linux,input-type = <1>;
+				gpio-key,wakeup = <1>;
+				debounce-interval = <100>;
+			};
+		};
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			green {
+				gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+				default-state = "off";
+			};
+
+			yellow {
+				gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+				default-state = "off";
+			};
+
+			sleep {
+				gpios = <&gpio0 15 0>;
+				default-state = "off";
+			};
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
new file mode 100644
index 0000000..1a26b03
--- /dev/null
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -0,0 +1,253 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3xxx.dtsi"
+#include "rk3188-clocks.dtsi"
+
+/ {
+	compatible = "rockchip,rk3188";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x3>;
+		};
+	};
+
+	soc {
+		global-timer@1013c200 {
+			interrupts = <GIC_PPI 11 0xf04>;
+		};
+
+		local-timer@1013c600 {
+			interrupts = <GIC_PPI 13 0xf04>;
+		};
+
+		pinctrl@20008000 {
+			compatible = "rockchip,rk3188-pinctrl";
+			reg = <0x20008000 0xa0>,
+			      <0x20008164 0x1a0>;
+			reg-names = "base", "pull";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gpio0: gpio0@0x2000a000 {
+				compatible = "rockchip,rk3188-gpio-bank0";
+				reg = <0x2000a000 0x100>,
+				      <0x20004064 0x8>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk_gates8 9>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio1: gpio1@0x2003c000 {
+				compatible = "rockchip,gpio-bank";
+				reg = <0x2003c000 0x100>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk_gates8 10>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio2@2003e000 {
+				compatible = "rockchip,gpio-bank";
+				reg = <0x2003e000 0x100>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk_gates8 11>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio3@20080000 {
+				compatible = "rockchip,gpio-bank";
+				reg = <0x20080000 0x100>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk_gates8 12>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			pcfg_pull_up: pcfg_pull_up {
+				bias-pull-up;
+			};
+
+			pcfg_pull_down: pcfg_pull_down {
+				bias-pull-down;
+			};
+
+			pcfg_pull_none: pcfg_pull_none {
+				bias-disable;
+			};
+
+			uart0 {
+				uart0_xfer: uart0-xfer {
+					rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				uart0_cts: uart0-cts {
+					rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				uart0_rts: uart0-rts {
+					rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_none>;
+				};
+			};
+
+			uart1 {
+				uart1_xfer: uart1-xfer {
+					rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				uart1_cts: uart1-cts {
+					rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				uart1_rts: uart1-rts {
+					rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_none>;
+				};
+			};
+
+			uart2 {
+				uart2_xfer: uart2-xfer {
+					rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>;
+				};
+				/* no rts / cts for uart2 */
+			};
+
+			uart3 {
+				uart3_xfer: uart3-xfer {
+					rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				uart3_cts: uart3-cts {
+					rockchip,pins = <RK_GPIO1 12 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				uart3_rts: uart3-rts {
+					rockchip,pins = <RK_GPIO1 13 RK_FUNC_1 &pcfg_pull_none>;
+				};
+			};
+
+			sd0 {
+				sd0_clk: sd0-clk {
+					rockchip,pins = <RK_GPIO3 2 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd0_cmd: sd0-cmd {
+					rockchip,pins = <RK_GPIO3 3 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd0_cd: sd0-cd {
+					rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd0_wp: sd0-wp {
+					rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd0_pwr: sd0-pwr {
+					rockchip,pins = <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd0_bus1: sd0-bus-width1 {
+					rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd0_bus4: sd0-bus-width4 {
+					rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO3 6 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO3 7 RK_FUNC_1 &pcfg_pull_none>;
+				};
+			};
+
+			sd1 {
+				sd1_clk: sd1-clk {
+					rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd1_cmd: sd1-cmd {
+					rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd1_cd: sd1-cd {
+					rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd1_wp: sd1-wp {
+					rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd1_bus1: sd1-bus-width1 {
+					rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>;
+				};
+
+				sd1_bus4: sd1-bus-width4 {
+					rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_none>,
+							<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
new file mode 100644
index 0000000..0fcbcfd
--- /dev/null
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -0,0 +1,124 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@1013d000 {
+			compatible = "arm,cortex-a9-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x1013d000 0x1000>,
+			      <0x1013c100 0x0100>;
+		};
+
+		L2: l2-cache-controller@10138000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x10138000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		global-timer@1013c200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x1013c200 0x20>;
+			interrupts = <GIC_PPI 11 0x304>;
+			clocks = <&dummy150m>;
+		};
+
+		local-timer@1013c600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x1013c600 0x20>;
+			interrupts = <GIC_PPI 13 0x304>;
+			clocks = <&dummy150m>;
+		};
+
+		uart0: serial@10124000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x10124000 0x400>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			clocks = <&clk_gates1 8>;
+			status = "disabled";
+		};
+
+		uart1: serial@10126000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x10126000 0x400>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			clocks = <&clk_gates1 10>;
+			status = "disabled";
+		};
+
+		uart2: serial@20064000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x20064000 0x400>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			clocks = <&clk_gates1 12>;
+			status = "disabled";
+		};
+
+		uart3: serial@20068000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x20068000 0x400>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			clocks = <&clk_gates1 14>;
+			status = "disabled";
+		};
+
+		dwmmc@10214000 {
+			compatible = "rockchip,rk2928-dw-mshc";
+			reg = <0x10214000 0x1000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clocks = <&clk_gates5 10>, <&clk_gates2 11>;
+			clock-names = "biu", "ciu";
+
+			status = "disabled";
+		};
+
+		dwmmc@10218000 {
+			compatible = "rockchip,rk2928-dw-mshc";
+			reg = <0x10218000 0x1000>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clocks = <&clk_gates5 11>, <&clk_gates2 13>;
+			clock-names = "biu", "ciu";
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/s3c6400.dtsi b/arch/arm/boot/dts/s3c6400.dtsi
new file mode 100644
index 0000000..a7d1c8e
--- /dev/null
+++ b/arch/arm/boot/dts/s3c6400.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Samsung's S3C6400 SoC device tree source
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung's S3C6400 SoC device nodes are listed in this file. S3C6400
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S3C6400 SoC. As device tree coverage for S3C6400 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "s3c64xx.dtsi"
+
+/ {
+	compatible = "samsung,s3c6400";
+};
+
+&vic0 {
+	valid-mask = <0xfffffe1f>;
+	valid-wakeup-mask = <0x00200004>;
+};
+
+&vic1 {
+	valid-mask = <0xffffffff>;
+	valid-wakeup-mask = <0x53020000>;
+};
+
+&soc {
+	clocks: clock-controller@7e00f000 {
+		compatible = "samsung,s3c6400-clock";
+		reg = <0x7e00f000 0x1000>;
+		#clock-cells = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts
new file mode 100644
index 0000000..57e00f9
--- /dev/null
+++ b/arch/arm/boot/dts/s3c6410-mini6410.dts
@@ -0,0 +1,228 @@
+/*
+ * Samsung's S3C6410 based Mini6410 board device tree source
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Device tree source file for FriendlyARM Mini6410 board which is based on
+ * Samsung's S3C6410 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "s3c6410.dtsi"
+
+/ {
+	model = "FriendlyARM Mini6410 board based on S3C6410";
+	compatible = "friendlyarm,mini6410", "samsung,s3c6410";
+
+	memory {
+		reg = <0x50000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fin_pll: oscillator@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			clock-frequency = <12000000>;
+			clock-output-names = "fin_pll";
+			#clock-cells = <0>;
+		};
+
+		xusbxti: oscillator@1 {
+			compatible = "fixed-clock";
+			reg = <1>;
+			clock-output-names = "xusbxti";
+			clock-frequency = <48000000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	srom-cs1@18000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x18000000 0x8000000>;
+		ranges;
+
+		ethernet@18000000 {
+			compatible = "davicom,dm9000";
+			reg = <0x18000000 0x2 0x18000004 0x2>;
+			interrupt-parent = <&gpn>;
+			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+			davicom,no-eeprom;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys>;
+		autorepeat;
+
+		button-k1 {
+			label = "K1";
+			gpios = <&gpn 0 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+			debounce-interval = <20>;
+		};
+
+		button-k2 {
+			label = "K2";
+			gpios = <&gpn 1 GPIO_ACTIVE_LOW>;
+			linux,code = <3>;
+			debounce-interval = <20>;
+		};
+
+		button-k3 {
+			label = "K3";
+			gpios = <&gpn 2 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+			debounce-interval = <20>;
+		};
+
+		button-k4 {
+			label = "K4";
+			gpios = <&gpn 3 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+			debounce-interval = <20>;
+		};
+
+		button-k5 {
+			label = "K5";
+			gpios = <&gpn 4 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+			debounce-interval = <20>;
+		};
+
+		button-k6 {
+			label = "K6";
+			gpios = <&gpn 5 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+			debounce-interval = <20>;
+		};
+
+		button-k7 {
+			label = "K7";
+			gpios = <&gpl 11 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+			debounce-interval = <20>;
+		};
+
+		button-k8 {
+			label = "K8";
+			gpios = <&gpl 12 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+			debounce-interval = <20>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_leds>;
+
+		led-1 {
+			label = "LED1";
+			gpios = <&gpk 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-2 {
+			label = "LED2";
+			gpios = <&gpk 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+		};
+
+		led-3 {
+			label = "LED3";
+			gpios = <&gpk 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			label = "LED4";
+			gpios = <&gpk 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	buzzer {
+		compatible = "pwm-beeper";
+		pwms = <&pwm 0 1000000 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_out>;
+	};
+};
+
+&sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_data>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_data>, <&uart1_fctl>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_data>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_data>;
+	status = "okay";
+};
+
+&pwm {
+	status = "okay";
+};
+
+&pinctrl0 {
+	gpio_leds: gpio-leds {
+		samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7";
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	gpio_keys: gpio-keys {
+		samsung,pins = "gpn-0", "gpn-1", "gpn-2", "gpn-3",
+				"gpn-4", "gpn-5", "gpl-11", "gpl-12";
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_bus>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/s3c6410-smdk6410.dts
new file mode 100644
index 0000000..ecf35ec
--- /dev/null
+++ b/arch/arm/boot/dts/s3c6410-smdk6410.dts
@@ -0,0 +1,103 @@
+/*
+ * Samsung S3C6410 based SMDK6410 board device tree source.
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Device tree source file for SAMSUNG SMDK6410 board which is based on
+ * Samsung's S3C6410 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "s3c6410.dtsi"
+
+/ {
+	model = "SAMSUNG SMDK6410 board based on S3C6410";
+	compatible = "samsung,mini6410", "samsung,s3c6410";
+
+	memory {
+		reg = <0x50000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fin_pll: oscillator@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			clock-frequency = <12000000>;
+			clock-output-names = "fin_pll";
+			#clock-cells = <0>;
+		};
+
+		xusbxti: oscillator@1 {
+			compatible = "fixed-clock";
+			reg = <1>;
+			clock-output-names = "xusbxti";
+			clock-frequency = <48000000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	srom-cs1@18000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x18000000 0x8000000>;
+		ranges;
+
+		ethernet@18000000 {
+			compatible = "smsc,lan9115";
+			reg = <0x18000000 0x10000>;
+			interrupt-parent = <&gpn>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+			phy-mode = "mii";
+			reg-io-width = <4>;
+			smsc,force-internal-phy;
+		};
+	};
+};
+
+&sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_data>, <&uart0_fctl>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_data>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_data>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_data>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/s3c6410.dtsi b/arch/arm/boot/dts/s3c6410.dtsi
new file mode 100644
index 0000000..eb4226b
--- /dev/null
+++ b/arch/arm/boot/dts/s3c6410.dtsi
@@ -0,0 +1,57 @@
+/*
+ * Samsung's S3C6410 SoC device tree source
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung's S3C6410 SoC device nodes are listed in this file. S3C6410
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S3C6410 SoC. As device tree coverage for S3C6410 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "s3c64xx.dtsi"
+
+/ {
+	compatible = "samsung,s3c6410";
+
+	aliases {
+		i2c1 = &i2c1;
+	};
+};
+
+&vic0 {
+	valid-mask = <0xffffff7f>;
+	valid-wakeup-mask = <0x00200004>;
+};
+
+&vic1 {
+	valid-mask = <0xffffffff>;
+	valid-wakeup-mask = <0x53020000>;
+};
+
+&soc {
+	clocks: clock-controller@7e00f000 {
+		compatible = "samsung,s3c6410-clock";
+		reg = <0x7e00f000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	i2c1: i2c@7f00f000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x7f00f000 0x1000>;
+		interrupt-parent = <&vic0>;
+		interrupts = <5>;
+		clock-names = "i2c";
+		clocks = <&clocks PCLK_IIC1>;
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
new file mode 100644
index 0000000..b1197d8
--- /dev/null
+++ b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
@@ -0,0 +1,687 @@
+/*
+ * Samsung's S3C64xx SoC series common device tree source
+ * - pin control-related definitions
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung's S3C64xx SoCs pin banks, pin-mux and pin-config options are
+ * listed as device tree nodes in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define PIN_PULL_NONE	0
+#define PIN_PULL_DOWN	1
+#define PIN_PULL_UP	2
+
+&pinctrl0 {
+	/*
+	 * Pin banks
+	 */
+
+	gpa: gpa {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb: gpb {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc: gpc {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd: gpd {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe: gpe {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpf: gpf {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg: gpg {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph: gph {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpi: gpi {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpj: gpj {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpk: gpk {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpl: gpl {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm: gpm {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpn: gpn {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpo: gpo {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp: gpp {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpq: gpq {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/*
+	 * Pin groups
+	 */
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa-0", "gpa-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa-2", "gpa-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa-4", "gpa-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa-6", "gpa-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpb-0", "gpb-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	ext_dma_0: ext-dma-0 {
+		samsung,pins = "gpb-0", "gpb-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	ext_dma_1: ext-dma-1 {
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	irda_data_0: irda-data-0 {
+		samsung,pins = "gpb-0", "gpb-1";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	irda_data_1: irda-data-1 {
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	irda_sdbw: irda-sdbw {
+		samsung,pins = "gpb-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpb-5", "gpb-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		/* S3C6410-only */
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <6>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpc-0", "gpc-1", "gpc-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+	};
+
+	spi0_cs: spi0-cs {
+		samsung,pins = "gpc-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpc-4", "gpc-5", "gpc-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+	};
+
+	spi1_cs: spi1-cs {
+		samsung,pins = "gpc-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpg-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpg-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd0_bus1: sd0-bus1 {
+		samsung,pins = "gpg-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd0_bus4: sd0-bus4 {
+		samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpg-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gph-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gph-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd1_bus1: sd1-bus1 {
+		samsung,pins = "gph-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd1_bus4: sd1-bus4 {
+		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd1_bus8: sd1-bus8 {
+		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5",
+				"gph-6", "gph-7", "gph-8", "gph-9";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd1_cd: sd1-cd {
+		samsung,pins = "gpg-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpc-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpc-5";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd2_bus1: sd2-bus1 {
+		samsung,pins = "gph-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd2_bus4: sd2-bus4 {
+		samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2s0_bus: i2s0-bus {
+		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2s0_cdclk: i2s0-cdclk {
+		samsung,pins = "gpd-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2s1_bus: i2s1-bus {
+		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2s1_cdclk: i2s1-cdclk {
+		samsung,pins = "gpe-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2s2_bus: i2s2-bus {
+		/* S3C6410-only */
+		samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6",
+				"gph-8", "gph-9";
+		samsung,pin-function = <5>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2s2_cdclk: i2s2-cdclk {
+		/* S3C6410-only */
+		samsung,pins = "gph-7";
+		samsung,pin-function = <5>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pcm0_bus: pcm0-bus {
+		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pcm0_extclk: pcm0-extclk {
+		samsung,pins = "gpd-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pcm1_bus: pcm1-bus {
+		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pcm1_extclk: pcm1-extclk {
+		samsung,pins = "gpe-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	ac97_bus_0: ac97-bus-0 {
+		samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	ac97_bus_1: ac97-bus-1 {
+		samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	cam_port: cam-port {
+		samsung,pins = "gpf-0", "gpf-1", "gpf-2", "gpf-4",
+				"gpf-5", "gpf-6", "gpf-7", "gpf-8",
+				"gpf-9", "gpf-10", "gpf-11", "gpf-12";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	cam_rst: cam-rst {
+		samsung,pins = "gpf-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	cam_field: cam-field {
+		/* S3C6410-only */
+		samsung,pins = "gpb-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pwm_extclk: pwm-extclk {
+		samsung,pins = "gpf-13";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpf-14";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpf-15";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	clkout0: clkout-0 {
+		samsung,pins = "gpf-14";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col0_0: keypad-col0-0 {
+		samsung,pins = "gph-0";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col1_0: keypad-col1-0 {
+		samsung,pins = "gph-1";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col2_0: keypad-col2-0 {
+		samsung,pins = "gph-2";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col3_0: keypad-col3-0 {
+		samsung,pins = "gph-3";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col4_0: keypad-col4-0 {
+		samsung,pins = "gph-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col5_0: keypad-col5-0 {
+		samsung,pins = "gph-5";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col6_0: keypad-col6-0 {
+		samsung,pins = "gph-6";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col7_0: keypad-col7-0 {
+		samsung,pins = "gph-7";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col0_1: keypad-col0-1 {
+		samsung,pins = "gpl-0";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col1_1: keypad-col1-1 {
+		samsung,pins = "gpl-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col2_1: keypad-col2-1 {
+		samsung,pins = "gpl-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col3_1: keypad-col3-1 {
+		samsung,pins = "gpl-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col4_1: keypad-col4-1 {
+		samsung,pins = "gpl-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col5_1: keypad-col5-1 {
+		samsung,pins = "gpl-5";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col6_1: keypad-col6-1 {
+		samsung,pins = "gpl-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col7_1: keypad-col7-1 {
+		samsung,pins = "gpl-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row0_0: keypad-row0-0 {
+		samsung,pins = "gpk-8";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row1_0: keypad-row1-0 {
+		samsung,pins = "gpk-9";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row2_0: keypad-row2-0 {
+		samsung,pins = "gpk-10";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row3_0: keypad-row3-0 {
+		samsung,pins = "gpk-11";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row4_0: keypad-row4-0 {
+		samsung,pins = "gpk-12";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row5_0: keypad-row5-0 {
+		samsung,pins = "gpk-13";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row6_0: keypad-row6-0 {
+		samsung,pins = "gpk-14";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row7_0: keypad-row7-0 {
+		samsung,pins = "gpk-15";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row0_1: keypad-row0-1 {
+		samsung,pins = "gpn-0";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row1_1: keypad-row1-1 {
+		samsung,pins = "gpn-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row2_1: keypad-row2-1 {
+		samsung,pins = "gpn-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row3_1: keypad-row3-1 {
+		samsung,pins = "gpn-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row4_1: keypad-row4-1 {
+		samsung,pins = "gpn-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row5_1: keypad-row5-1 {
+		samsung,pins = "gpn-5";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row6_1: keypad-row6-1 {
+		samsung,pins = "gpn-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row7_1: keypad-row7-1 {
+		samsung,pins = "gpn-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	lcd_ctrl: lcd-ctrl {
+		samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	lcd_data16: lcd-data-width16 {
+		samsung,pins = "gpi-3", "gpi-4", "gpi-5", "gpi-6",
+				"gpi-7", "gpi-10", "gpi-11", "gpi-12",
+				"gpi-13", "gpi-14", "gpi-15", "gpj-3",
+				"gpj-4", "gpj-5", "gpj-6", "gpj-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	lcd_data18: lcd-data-width18 {
+		samsung,pins = "gpi-2", "gpi-3", "gpi-4", "gpi-5",
+				"gpi-6", "gpi-7", "gpi-10", "gpi-11",
+				"gpi-12", "gpi-13", "gpi-14", "gpi-15",
+				"gpj-2", "gpj-3", "gpj-4", "gpj-5",
+				"gpj-6", "gpj-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	lcd_data24: lcd-data-width24 {
+		samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
+				"gpi-4", "gpi-5", "gpi-6", "gpi-7",
+				"gpi-8", "gpi-9", "gpi-10", "gpi-11",
+				"gpi-12", "gpi-13", "gpi-14", "gpi-15",
+				"gpj-0", "gpj-1", "gpj-2", "gpj-3",
+				"gpj-4", "gpj-5", "gpj-6", "gpj-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	hsi_bus: hsi-bus {
+		samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3",
+				"gpk-4", "gpk-5", "gpk-6", "gpk-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+};
diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi
new file mode 100644
index 0000000..4e3be4d
--- /dev/null
+++ b/arch/arm/boot/dts/s3c64xx.dtsi
@@ -0,0 +1,199 @@
+/*
+ * Samsung's S3C64xx SoC series common device tree source
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung's S3C64xx SoC series device nodes are listed in this file.
+ * Particular SoCs from S3C64xx series can include this file and provide
+ * values for SoCs specfic bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S3C64xx SoCs. As device tree coverage for S3C64xx increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/samsung,s3c64xx-clock.h>
+
+/ {
+	aliases {
+		i2c0 = &i2c0;
+		pinctrl0 = &pinctrl0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm1176jzf-s", "arm,arm1176";
+			reg = <0x0>;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vic0: interrupt-controller@71200000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0x71200000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		vic1: interrupt-controller@71300000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0x71300000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		sdhci0: sdhci@7c200000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0x7c200000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <24>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+			clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>,
+					<&clocks SCLK_MMC0>;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@7c300000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0x7c300000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <25>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+			clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>,
+					<&clocks SCLK_MMC1>;
+			status = "disabled";
+		};
+
+		sdhci2: sdhci@7c400000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0x7c400000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <17>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+			clocks = <&clocks HCLK_HSMMC2>, <&clocks HCLK_HSMMC2>,
+					<&clocks SCLK_MMC2>;
+			status = "disabled";
+		};
+
+		watchdog: watchdog@7e004000 {
+			compatible = "samsung,s3c2410-wdt";
+			reg = <0x7e004000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <26>;
+			clock-names = "watchdog";
+			clocks = <&clocks PCLK_WDT>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@7f004000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x7f004000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <18>;
+			clock-names = "i2c";
+			clocks = <&clocks PCLK_IIC0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		uart0: serial@7f005000 {
+			compatible = "samsung,s3c6400-uart";
+			reg = <0x7f005000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <5>;
+			clock-names = "uart", "clk_uart_baud2",
+					"clk_uart_baud3";
+			clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+					<&clocks SCLK_UART>;
+			status = "disabled";
+		};
+
+		uart1: serial@7f005400 {
+			compatible = "samsung,s3c6400-uart";
+			reg = <0x7f005400 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <6>;
+			clock-names = "uart", "clk_uart_baud2",
+					"clk_uart_baud3";
+			clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
+					<&clocks SCLK_UART>;
+			status = "disabled";
+		};
+
+		uart2: serial@7f005800 {
+			compatible = "samsung,s3c6400-uart";
+			reg = <0x7f005800 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <7>;
+			clock-names = "uart", "clk_uart_baud2",
+					"clk_uart_baud3";
+			clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
+					<&clocks SCLK_UART>;
+			status = "disabled";
+		};
+
+		uart3: serial@7f005c00 {
+			compatible = "samsung,s3c6400-uart";
+			reg = <0x7f005c00 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <8>;
+			clock-names = "uart", "clk_uart_baud2",
+					"clk_uart_baud3";
+			clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>,
+					<&clocks SCLK_UART>;
+			status = "disabled";
+		};
+
+		pwm: pwm@7f006000 {
+			compatible = "samsung,s3c6400-pwm";
+			reg = <0x7f006000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <23>, <24>, <25>, <27>, <28>;
+			clock-names = "timers";
+			clocks = <&clocks PCLK_PWM>;
+			samsung,pwm-outputs = <0>, <1>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pinctrl0: pinctrl@7f008000 {
+			compatible = "samsung,s3c64xx-pinctrl";
+			reg = <0x7f008000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <21>;
+
+			pctrl_int_map: pinctrl-interrupt-map {
+				interrupt-map = <0 &vic0 0>,
+						<1 &vic0 1>,
+						<2 &vic1 0>,
+						<3 &vic1 1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,s3c64xx-wakeup-eint";
+				interrupts = <0>, <1>, <2>, <3>;
+				interrupt-parent = <&pctrl_int_map>;
+			};
+		};
+	};
+};
+
+#include "s3c64xx-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index a1d5e25..5cdaba4 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -31,7 +31,6 @@
 		gpio3 = &pioD;
 		gpio4 = &pioE;
 		tcb0 = &tcb0;
-		tcb1 = &tcb1;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -48,6 +47,11 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <46 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
 	memory {
 		reg = <0x20000000 0x8000000>;
 	};
@@ -100,15 +104,6 @@
 				status = "disabled";
 			};
 
-			can0: can@f000c000 {
-				compatible = "atmel,at91sam9x5-can";
-				reg = <0xf000c000 0x300>;
-				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_can0_rx_tx>;
-				status = "disabled";
-			};
-
 			tcb0: timer@f0010000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf0010000 0x100>;
@@ -161,15 +156,6 @@
 				status = "disabled";
 			};
 
-			macb0: ethernet@f0028000 {
-				compatible = "cdns,pc302-gem", "cdns,gem";
-				reg = <0xf0028000 0x100>;
-				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
-				status = "disabled";
-			};
-
 			isi: isi@f0034000 {
 				compatible = "atmel,at91sam9g45-isi";
 				reg = <0xf0034000 0x4000>;
@@ -190,19 +176,6 @@
 				#size-cells = <0>;
 			};
 
-			mmc2: mmc@f8004000 {
-				compatible = "atmel,hsmci";
-				reg = <0xf8004000 0x600>;
-				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(1)>;
-				dma-names = "rxtx";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
-				status = "disabled";
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
 			spi1: spi@f8008000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -226,20 +199,6 @@
 				status = "disabled";
 			};
 
-			can1: can@f8010000 {
-				compatible = "atmel,at91sam9x5-can";
-				reg = <0xf8010000 0x300>;
-				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_can1_rx_tx>;
-			};
-
-			tcb1: timer@f8014000 {
-				compatible = "atmel,at91sam9x5-tcb";
-				reg = <0xf8014000 0x100>;
-				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
-			};
-
 			adc0: adc@f8018000 {
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xf8018000 0x100>;
@@ -336,15 +295,6 @@
 				status = "disabled";
 			};
 
-			macb1: ethernet@f802c000 {
-				compatible = "cdns,at32ap7000-macb", "cdns,macb";
-				reg = <0xf802c000 0x100>;
-				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb1_rmii>;
-				status = "disabled";
-			};
-
 			sha@f8034000 {
 				compatible = "atmel,sam9g46-sha";
 				reg = <0xf8034000 0x100>;
@@ -469,22 +419,6 @@
 					};
 				};
 
-				can0 {
-					pinctrl_can0_rx_tx: can0_rx_tx {
-						atmel,pins =
-							<AT91_PIOD 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */
-							 AT91_PIOD 15 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */
-					};
-				};
-
-				can1 {
-					pinctrl_can1_rx_tx: can1_rx_tx {
-						atmel,pins =
-							<AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB14 periph B RX, conflicts with GCRS */
-							 AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB15 periph B TX, conflicts with GCOL */
-					};
-				};
-
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
@@ -532,107 +466,6 @@
 					};
 				};
 
-				lcd {
-					pinctrl_lcd: lcd-0 {
-						atmel,pins =
-							<AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA24 periph A LCDPWM */
-							 AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA26 periph A LCDVSYNC */
-							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA27 periph A LCDHSYNC */
-							 AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA25 periph A LCDDISP */
-							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA29 periph A LCDDEN */
-							 AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA28 periph A LCDPCK */
-							 AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A LCDD0 pin */
-							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA1 periph A LCDD1 pin */
-							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA2 periph A LCDD2 pin */
-							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA3 periph A LCDD3 pin */
-							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA4 periph A LCDD4 pin */
-							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA5 periph A LCDD5 pin */
-							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA6 periph A LCDD6 pin */
-							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA7 periph A LCDD7 pin */
-							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA8 periph A LCDD8 pin */
-							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA9 periph A LCDD9 pin */
-							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA10 periph A LCDD10 pin */
-							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A LCDD11 pin */
-							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A LCDD12 pin */
-							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A LCDD13 pin */
-							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A LCDD14 pin */
-							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A LCDD15 pin */
-							 AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC14 periph C LCDD16 pin */
-							 AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC13 periph C LCDD17 pin */
-							 AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC12 periph C LCDD18 pin */
-							 AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC11 periph C LCDD19 pin */
-							 AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC10 periph C LCDD20 pin */
-							 AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC15 periph C LCDD21 pin */
-							 AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PE27 periph C LCDD22 pin */
-							 AT91_PIOE 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PE28 periph C LCDD23 pin */
-					};
-				};
-
-				macb0 {
-					pinctrl_macb0_data_rgmii: macb0_data_rgmii {
-						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A GTX0, conflicts with PWMH0 */
-							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A GTX1, conflicts with PWML0 */
-							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A GTX2, conflicts with TK1 */
-							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A GTX3, conflicts with TF1 */
-							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A GRX0, conflicts with PWMH1 */
-							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A GRX1, conflicts with PWML1 */
-							 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A GRX2, conflicts with TD1 */
-							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB7 periph A GRX3, conflicts with RK1 */
-					};
-					pinctrl_macb0_data_gmii: macb0_data_gmii {
-						atmel,pins =
-							<AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB19 periph B GTX4, conflicts with MCI1_CDA */
-							 AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB20 periph B GTX5, conflicts with MCI1_DA0 */
-							 AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB21 periph B GTX6, conflicts with MCI1_DA1 */
-							 AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB22 periph B GTX7, conflicts with MCI1_DA2 */
-							 AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB23 periph B GRX4, conflicts with MCI1_DA3 */
-							 AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB24 periph B GRX5, conflicts with MCI1_CK */
-							 AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB25 periph B GRX6, conflicts with SCK1 */
-							 AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB26 periph B GRX7, conflicts with CTS1 */
-					};
-					pinctrl_macb0_signal_rgmii: macb0_signal_rgmii {
-						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB8 periph A GTXCK, conflicts with PWMH2 */
-							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A GTXEN, conflicts with PWML2 */
-							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A GRXCK, conflicts with RD1 */
-							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A GRXER, conflicts with PWML3 */
-							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A GMDC */
-							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A GMDIO */
-							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A G125CK */
-					};
-					pinctrl_macb0_signal_gmii: macb0_signal_gmii {
-						atmel,pins =
-							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A GTXEN, conflicts with PWML2 */
-							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB10 periph A GTXER, conflicts with RF1 */
-							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A GRXCK, conflicts with RD1 */
-							 AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A GRXDV, conflicts with PWMH3 */
-							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A GRXER, conflicts with PWML3 */
-							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A GCRS, conflicts with CANRX1 */
-							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A GCOL, conflicts with CANTX1 */
-							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A GMDC */
-							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A GMDIO */
-							 AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB27 periph B G125CKO */
-					};
-
-				};
-
-				macb1 {
-					pinctrl_macb1_rmii: macb1_rmii-0 {
-						atmel,pins =
-							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC0 periph A ETX0, conflicts with TIOA3 */
-							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC1 periph A ETX1, conflicts with TIOB3 */
-							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC2 periph A ERX0, conflicts with TCLK3 */
-							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC3 periph A ERX1, conflicts with TIOA4 */
-							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC4 periph A ETXEN, conflicts with TIOB4 */
-							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC5 periph A ECRSDV,conflicts with TCLK4 */
-							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC6 periph A ERXER, conflicts with TIOA5 */
-							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC7 periph A EREFCK, conflicts with TIOB5 */
-							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC8 periph A EMDC, conflicts with TCLK5 */
-							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC9 periph A EMDIO  */
-					};
-				};
-
 				mmc0 {
 					pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
 						atmel,pins =
@@ -670,21 +503,6 @@
 					};
 				};
 
-				mmc2 {
-					pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 {
-						atmel,pins =
-							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC15 periph A MCI2_CK, conflicts with PCK2 */
-							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC10 periph A MCI2_CDA with pullup */
-							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC11 periph A MCI2_DA0 with pullup */
-					};
-					pinctrl_mmc2_dat1_3: mmc2_dat1_3 {
-						atmel,pins =
-							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
-							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
-							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
-					};
-				};
-
 				nand0 {
 					pinctrl_nand0_ale_cle: nand0_ale_cle-0 {
 						atmel,pins =
@@ -743,22 +561,6 @@
 					};
 				};
 
-				uart0 {
-					pinctrl_uart0: uart0-0 {
-						atmel,pins =
-							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC29 periph A, conflicts with PWMFI2, ISI_D8 */
-							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC30 periph A with pullup, conflicts with ISI_PCK */
-					};
-				};
-
-				uart1 {
-					pinctrl_uart1: uart1-0 {
-						atmel,pins =
-							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA30 periph B, conflicts with TWD0, ISI_VSYNC */
-							 AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */
-					};
-				};
-
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
@@ -1029,21 +831,30 @@
 			compatible = "atmel,at91rm9200-nand";
 			#address-cells = <1>;
 			#size-cells = <1>;
+			ranges;
 			reg = <	0x60000000 0x01000000	/* EBI CS3 */
 				0xffffc070 0x00000490	/* SMC PMECC regs */
 				0xffffc500 0x00000100	/* SMC PMECC Error Location regs */
-				0x00100000 0x00100000	/* ROM code */
-				0x70000000 0x10000000	/* NFC Command Registers */
-				0xffffc000 0x00000070	/* NFC HSMC regs */
-				0x00200000 0x00100000	/* NFC SRAM banks */
+				0x00110000 0x00018000	/* ROM code */
 				>;
 			interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand0_ale_cle>;
-			atmel,pmecc-lookup-table-offset = <0x10000 0x18000>;
+			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
 			status = "disabled";
+
+			nfc@70000000 {
+				compatible = "atmel,sama5d3-nfc";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <
+					0x70000000 0x10000000	/* NFC Command Registers */
+					0xffffc000 0x00000070	/* NFC HSMC regs */
+					0x00200000 0x00100000	/* NFC SRAM banks */
+					>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sama5d31.dtsi b/arch/arm/boot/dts/sama5d31.dtsi
new file mode 100644
index 0000000..7997dc9
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d31.dtsi
@@ -0,0 +1,16 @@
+/*
+ * sama5d31.dtsi - Device Tree Include file for SAMA5D31 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_uart.dtsi"
+
+/ {
+	compatible = "atmel,samad31", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/sama5d31ek.dts b/arch/arm/boot/dts/sama5d31ek.dts
index 027bac7..04eec0d 100644
--- a/arch/arm/boot/dts/sama5d31ek.dts
+++ b/arch/arm/boot/dts/sama5d31ek.dts
@@ -7,12 +7,13 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
+#include "sama5d31.dtsi"
 #include "sama5d3xmb.dtsi"
 #include "sama5d3xdm.dtsi"
 
 / {
 	model = "Atmel SAMA5D31-EK";
-	compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
 
 	ahb {
 		apb {
diff --git a/arch/arm/boot/dts/sama5d33.dtsi b/arch/arm/boot/dts/sama5d33.dtsi
new file mode 100644
index 0000000..39f8322
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d33.dtsi
@@ -0,0 +1,14 @@
+/*
+ * sama5d33.dtsi - Device Tree Include file for SAMA5D33 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_gmac.dtsi"
+
+/ {
+	compatible = "atmel,samad33", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/sama5d33ek.dts
index 99bd0c8..cbd6a3f 100644
--- a/arch/arm/boot/dts/sama5d33ek.dts
+++ b/arch/arm/boot/dts/sama5d33ek.dts
@@ -7,12 +7,13 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
+#include "sama5d33.dtsi"
 #include "sama5d3xmb.dtsi"
 #include "sama5d3xdm.dtsi"
 
 / {
 	model = "Atmel SAMA5D33-EK";
-	compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d33", "atmel,sama5d3", "atmel,sama5";
 
 	ahb {
 		apb {
diff --git a/arch/arm/boot/dts/sama5d34.dtsi b/arch/arm/boot/dts/sama5d34.dtsi
new file mode 100644
index 0000000..89cda2c
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d34.dtsi
@@ -0,0 +1,16 @@
+/*
+ * sama5d34.dtsi - Device Tree Include file for SAMA5D34 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_mci2.dtsi"
+
+/ {
+	compatible = "atmel,samad34", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts
index fb8ee11..878aa16 100644
--- a/arch/arm/boot/dts/sama5d34ek.dts
+++ b/arch/arm/boot/dts/sama5d34ek.dts
@@ -7,12 +7,13 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
+#include "sama5d34.dtsi"
 #include "sama5d3xmb.dtsi"
 #include "sama5d3xdm.dtsi"
 
 / {
 	model = "Atmel SAMA5D34-EK";
-	compatible = "atmel,sama5d34ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d34ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d34", "atmel,sama5d3", "atmel,sama5";
 
 	ahb {
 		apb {
diff --git a/arch/arm/boot/dts/sama5d35.dtsi b/arch/arm/boot/dts/sama5d35.dtsi
new file mode 100644
index 0000000..d20cd71
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d35.dtsi
@@ -0,0 +1,18 @@
+/*
+ * sama5d35.dtsi - Device Tree Include file for SAMA5D35 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_uart.dtsi"
+#include "sama5d3_tcb1.dtsi"
+
+/ {
+	compatible = "atmel,samad35", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts
index 509a53d..9089c7c 100644
--- a/arch/arm/boot/dts/sama5d35ek.dts
+++ b/arch/arm/boot/dts/sama5d35ek.dts
@@ -7,11 +7,12 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
+#include "sama5d35.dtsi"
 #include "sama5d3xmb.dtsi"
 
 / {
 	model = "Atmel SAMA5D35-EK";
-	compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d35", "atmel,sama5d3", "atmel,sama5";
 
 	ahb {
 		apb {
diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi
new file mode 100644
index 0000000..8ed3260
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_can.dtsi
@@ -0,0 +1,54 @@
+/*
+ * at91sama5d3_can.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * CAN support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				can0 {
+					pinctrl_can0_rx_tx: can0_rx_tx {
+						atmel,pins =
+							<AT91_PIOD 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */
+							 AT91_PIOD 15 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */
+					};
+				};
+
+				can1 {
+					pinctrl_can1_rx_tx: can1_rx_tx {
+						atmel,pins =
+							<AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB14 periph B RX, conflicts with GCRS */
+							 AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB15 periph B TX, conflicts with GCOL */
+					};
+				};
+
+			};
+
+			can0: can@f000c000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf000c000 0x300>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can0_rx_tx>;
+				status = "disabled";
+			};
+
+			can1: can@f8010000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf8010000 0x300>;
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can1_rx_tx>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/sama5d3_emac.dtsi
new file mode 100644
index 0000000..4d4f351
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_emac.dtsi
@@ -0,0 +1,44 @@
+/*
+ * at91sama5d3_emac.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * Ethernet.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				macb1 {
+					pinctrl_macb1_rmii: macb1_rmii-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC0 periph A ETX0, conflicts with TIOA3 */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC1 periph A ETX1, conflicts with TIOB3 */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC2 periph A ERX0, conflicts with TCLK3 */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC3 periph A ERX1, conflicts with TIOA4 */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC4 periph A ETXEN, conflicts with TIOB4 */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC5 periph A ECRSDV,conflicts with TCLK4 */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC6 periph A ERXER, conflicts with TIOA5 */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC7 periph A EREFCK, conflicts with TIOB5 */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC8 periph A EMDC, conflicts with TCLK5 */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC9 periph A EMDIO  */
+					};
+				};
+			};
+
+			macb1: ethernet@f802c000 {
+				compatible = "cdns,at32ap7000-macb", "cdns,macb";
+				reg = <0xf802c000 0x100>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3_gmac.dtsi b/arch/arm/boot/dts/sama5d3_gmac.dtsi
new file mode 100644
index 0000000..0ba8be3
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_gmac.dtsi
@@ -0,0 +1,77 @@
+/*
+ * at91sama5d3_gmac.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * Gigabit Ethernet.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				macb0 {
+					pinctrl_macb0_data_rgmii: macb0_data_rgmii {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A GTX0, conflicts with PWMH0 */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A GTX1, conflicts with PWML0 */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A GTX2, conflicts with TK1 */
+							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A GTX3, conflicts with TF1 */
+							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A GRX0, conflicts with PWMH1 */
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A GRX1, conflicts with PWML1 */
+							 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A GRX2, conflicts with TD1 */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB7 periph A GRX3, conflicts with RK1 */
+					};
+					pinctrl_macb0_data_gmii: macb0_data_gmii {
+						atmel,pins =
+							<AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB19 periph B GTX4, conflicts with MCI1_CDA */
+							 AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB20 periph B GTX5, conflicts with MCI1_DA0 */
+							 AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB21 periph B GTX6, conflicts with MCI1_DA1 */
+							 AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB22 periph B GTX7, conflicts with MCI1_DA2 */
+							 AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB23 periph B GRX4, conflicts with MCI1_DA3 */
+							 AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB24 periph B GRX5, conflicts with MCI1_CK */
+							 AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB25 periph B GRX6, conflicts with SCK1 */
+							 AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB26 periph B GRX7, conflicts with CTS1 */
+					};
+					pinctrl_macb0_signal_rgmii: macb0_signal_rgmii {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB8 periph A GTXCK, conflicts with PWMH2 */
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A GTXEN, conflicts with PWML2 */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A GRXCK, conflicts with RD1 */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A GRXER, conflicts with PWML3 */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A GMDC */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A GMDIO */
+							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A G125CK */
+					};
+					pinctrl_macb0_signal_gmii: macb0_signal_gmii {
+						atmel,pins =
+							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A GTXEN, conflicts with PWML2 */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB10 periph A GTXER, conflicts with RF1 */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A GRXCK, conflicts with RD1 */
+							 AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A GRXDV, conflicts with PWMH3 */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A GRXER, conflicts with PWML3 */
+							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A GCRS, conflicts with CANRX1 */
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A GCOL, conflicts with CANTX1 */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A GMDC */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A GMDIO */
+							 AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB27 periph B G125CKO */
+					};
+
+				};
+			};
+
+			macb0: ethernet@f0028000 {
+				compatible = "cdns,pc302-gem", "cdns,gem";
+				reg = <0xf0028000 0x100>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3_lcd.dtsi b/arch/arm/boot/dts/sama5d3_lcd.dtsi
new file mode 100644
index 0000000..01f52a7
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_lcd.dtsi
@@ -0,0 +1,55 @@
+/*
+ * at91sama5d3_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * LCD support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				lcd {
+					pinctrl_lcd: lcd-0 {
+						atmel,pins =
+							<AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA24 periph A LCDPWM */
+							 AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA26 periph A LCDVSYNC */
+							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA27 periph A LCDHSYNC */
+							 AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA25 periph A LCDDISP */
+							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA29 periph A LCDDEN */
+							 AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA28 periph A LCDPCK */
+							 AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA1 periph A LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA2 periph A LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA3 periph A LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA4 periph A LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA5 periph A LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA6 periph A LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA7 periph A LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA8 periph A LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA9 periph A LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA10 periph A LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A LCDD15 pin */
+							 AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC14 periph C LCDD16 pin */
+							 AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC13 periph C LCDD17 pin */
+							 AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC12 periph C LCDD18 pin */
+							 AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC11 periph C LCDD19 pin */
+							 AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC10 periph C LCDD20 pin */
+							 AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC15 periph C LCDD21 pin */
+							 AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PE27 periph C LCDD22 pin */
+							 AT91_PIOE 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PE28 periph C LCDD23 pin */
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi
new file mode 100644
index 0000000..38e88e3
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi
@@ -0,0 +1,47 @@
+/*
+ * at91sama5d3_mci2.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * 3 MMC ports
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				mmc2 {
+					pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC15 periph A MCI2_CK, conflicts with PCK2 */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC10 periph A MCI2_CDA with pullup */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC11 periph A MCI2_DA0 with pullup */
+					};
+					pinctrl_mmc2_dat1_3: mmc2_dat1_3 {
+						atmel,pins =
+							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
+					};
+				};
+			};
+
+			mmc2: mmc@f8004000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf8004000 0x600>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(1)>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
new file mode 100644
index 0000000..5264bb4
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
@@ -0,0 +1,27 @@
+/*
+ * at91sama5d3_tcb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * 2 TC blocks.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	aliases {
+		tcb1 = &tcb1;
+	};
+
+	ahb {
+		apb {
+			tcb1: timer@f8014000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xf8014000 0x100>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi
new file mode 100644
index 0000000..98fcb2d
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_uart.dtsi
@@ -0,0 +1,53 @@
+/*
+ * at91sama5d3_uart.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * UART support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC29 periph A, conflicts with PWMFI2, ISI_D8 */
+							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC30 periph A with pullup, conflicts with ISI_PCK */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA30 periph B, conflicts with TWD0, ISI_VSYNC */
+							 AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */
+					};
+				};
+			};
+
+			uart0: serial@f0024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf0024000 0x200>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				status = "disabled";
+			};
+
+			uart1: serial@f8028000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8028000 0x200>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
index 1f80508..726a0f3 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -6,7 +6,6 @@
  *
  * Licensed under GPLv2 or later.
  */
-#include "sama5d3.dtsi"
 
 / {
 	compatible = "atmel,samad3xcm", "atmel,sama5d3", "atmel,sama5";
@@ -47,8 +46,6 @@
 			atmel,has-pmecc;
 			atmel,pmecc-cap = <4>;
 			atmel,pmecc-sector-size = <512>;
-			atmel,has-nfc;
-			atmel,use-nfc-sram;
 			nand-on-flash-bbt;
 			status = "okay";
 
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
index 8a9e05d..dba739b 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -81,6 +81,14 @@
 
 			macb1: ethernet@f802c000 {
 				phy-mode = "rmii";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&pioE>;
+					interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+					reg = <1>;
+				};
 			};
 
 			pinctrl@fffff200 {
diff --git a/arch/arm/boot/dts/sh7372.dtsi b/arch/arm/boot/dts/sh7372.dtsi
index 7bf020e..249f65be2 100644
--- a/arch/arm/boot/dts/sh7372.dtsi
+++ b/arch/arm/boot/dts/sh7372.dtsi
@@ -23,4 +23,12 @@
 			reg = <0x0>;
 		};
 	};
+
+	pfc: pfc@e6050000 {
+		compatible = "renesas,pfc-sh7372";
+		reg = <0xe6050000 0x8000>,
+		      <0xe605801c 0x1c>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 };
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index b6f759e..8ee06dd 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -13,6 +13,7 @@
 
 /dts-v1/;
 /include/ "sh73a0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "KZM-A9-GT";
@@ -32,7 +33,7 @@
 	};
 
 	chosen {
-		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200";
+		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200 rw";
 	};
 
 	memory {
@@ -58,6 +59,24 @@
 		regulator-boot-on;
 	};
 
+	vmmc_sdhi0: regulator@2 {
+	        compatible = "regulator-fixed";
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vmmc_sdhi2: regulator@3 {
+	        compatible = "regulator-fixed";
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	lan9220@10000000 {
 		compatible = "smsc,lan9220", "smsc,lan9115";
 		reg = <0x10000000 0x100>;
@@ -70,9 +89,26 @@
 		vddvario-supply = <&reg_1p8v>;
 		vdd33a-supply = <&reg_3p3v>;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
+		};
+		led2 {
+			gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
+		};
+		led3 {
+			gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
+		};
+		led4 {
+			gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
+		};
+	};
 };
 
 &i2c0 {
+	status = "okay";
 	as3711@40 {
 		compatible = "ams,as3711";
 		reg = <0x40>;
@@ -145,20 +181,72 @@
 	};
 };
 
+&i2c3 {
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &mmcif {
+	pinctrl-0 = <&mmcif_pins>;
+	pinctrl-names = "default";
+
 	bus-width = <8>;
 	vmmc-supply = <&reg_1p8v>;
 	status = "okay";
 };
 
+&pfc {
+	pinctrl-0 = <&scifa4_pins>;
+	pinctrl-names = "default";
+
+	i2c3_pins: i2c3 {
+		renesas,groups = "i2c3_1";
+		renesas,function = "i2c3";
+	};
+
+	mmcif_pins: mmcif {
+		mux {
+			renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
+			renesas,function = "mmc0";
+		};
+		cfg {
+			renesas,groups = "mmc0_data8_0";
+			renesas,pins = "PORT279";
+			bias-pull-up;
+		};
+	};
+
+	scifa4_pins: scifa4 {
+		renesas,groups = "scifa4_data", "scifa4_ctrl";
+		renesas,function = "scifa4";
+	};
+
+	sdhi0_pins: sdhi0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
+		renesas,function = "sdhi0";
+	};
+
+	sdhi2_pins: sdhi2 {
+		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+		renesas,function = "sdhi2";
+	};
+};
+
 &sdhi0 {
-	vmmc-supply = <&reg_3p3v>;
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vmmc_sdhi0>;
 	bus-width = <4>;
 	status = "okay";
 };
 
 &sdhi2 {
-	vmmc-supply = <&reg_3p3v>;
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vmmc_sdhi2>;
 	bus-width = <4>;
 	broken-cd;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
index 7c4071e..0f1ca77 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -16,7 +16,7 @@
 	compatible = "renesas,kzm9g", "renesas,sh73a0";
 
 	chosen {
-		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200";
+		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200 rw";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index b977502..fcf2688 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -38,6 +38,12 @@
 		      <0xf0000100 0x100>;
 	};
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 55 4>,
+			     <0 56 4>;
+	};
+
 	irqpin0: irqpin@e6900000 {
 		compatible = "renesas,intc-irqpin";
 		#interrupt-cells = <2>;
@@ -129,6 +135,7 @@
 			      0 168 0x4
 			      0 169 0x4
 			      0 170 0x4>;
+		status = "disabled";
 	};
 
 	i2c1: i2c@e6822000 {
@@ -141,6 +148,7 @@
 			      0 52 0x4
 			      0 53 0x4
 			      0 54 0x4>;
+		status = "disabled";
 	};
 
 	i2c2: i2c@e6824000 {
@@ -153,6 +161,7 @@
 			      0 172 0x4
 			      0 173 0x4
 			      0 174 0x4>;
+		status = "disabled";
 	};
 
 	i2c3: i2c@e6826000 {
@@ -165,6 +174,7 @@
 			      0 184 0x4
 			      0 185 0x4
 			      0 186 0x4>;
+		status = "disabled";
 	};
 
 	i2c4: i2c@e6828000 {
@@ -177,6 +187,7 @@
 			      0 188 0x4
 			      0 189 0x4
 			      0 190 0x4>;
+		status = "disabled";
 	};
 
 	mmcif: mmcif@e6bd0000 {
@@ -190,7 +201,7 @@
 	};
 
 	sdhi0: sdhi@ee100000 {
-		compatible = "renesas,r8a7740-sdhi";
+		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xee100000 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 83 4
@@ -202,7 +213,7 @@
 
 	/* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */
 	sdhi1: sdhi@ee120000 {
-		compatible = "renesas,r8a7740-sdhi";
+		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xee120000 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 88 4
@@ -213,7 +224,7 @@
 	};
 
 	sdhi2: sdhi@ee140000 {
-		compatible = "renesas,r8a7740-sdhi";
+		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xee140000 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 104 4
@@ -222,4 +233,12 @@
 		cap-sd-highspeed;
 		status = "disabled";
 	};
+
+	pfc: pfc@e6050000 {
+		compatible = "renesas,pfc-sh73a0";
+		reg = <0xe6050000 0x8000>,
+		      <0xe605801c 0x1c>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 };
diff --git a/arch/arm/boot/dts/skeleton64.dtsi b/arch/arm/boot/dts/skeleton64.dtsi
index 1599415..b5d7f36 100644
--- a/arch/arm/boot/dts/skeleton64.dtsi
+++ b/arch/arm/boot/dts/skeleton64.dtsi
@@ -9,5 +9,5 @@
 	#size-cells = <2>;
 	chosen { };
 	aliases { };
-	memory { device_type = "memory"; reg = <0 0>; };
+	memory { device_type = "memory"; reg = <0 0 0 0>; };
 };
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index bee62a2..6d09b8d 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -147,7 +147,7 @@
 							reg = <0x58>;
 						};
 
-						cfg_s2f_usr0_clk: cfg_s2f_usr0_clk {
+						cfg_h2f_usr0_clk: cfg_h2f_usr0_clk {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&main_pll>;
@@ -198,7 +198,7 @@
 							reg = <0x98>;
 						};
 
-						s2f_usr1_clk: s2f_usr1_clk {
+						h2f_usr1_clk: h2f_usr1_clk {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&periph_pll>;
@@ -235,7 +235,7 @@
 							reg = <0xD0>;
 						};
 
-						s2f_usr2_clk: s2f_usr2_clk {
+						h2f_usr2_clk: h2f_usr2_clk {
 							#clock-cells = <0>;
 							compatible = "altr,socfpga-perip-clk";
 							clocks = <&sdram_pll>;
@@ -243,197 +243,197 @@
 						};
 					};
 
-				mpu_periph_clk: mpu_periph_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&mpuclk>;
-					fixed-divider = <4>;
+					mpu_periph_clk: mpu_periph_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mpuclk>;
+						fixed-divider = <4>;
 					};
 
-				mpu_l2_ram_clk: mpu_l2_ram_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&mpuclk>;
-					fixed-divider = <2>;
+					mpu_l2_ram_clk: mpu_l2_ram_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mpuclk>;
+						fixed-divider = <2>;
 					};
 
-				l4_main_clk: l4_main_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&mainclk>;
-					clk-gate = <0x60 0>;
+					l4_main_clk: l4_main_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>;
+						clk-gate = <0x60 0>;
 					};
 
-				l3_main_clk: l3_main_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&mainclk>;
+					l3_main_clk: l3_main_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>;
 					};
 
-				l3_mp_clk: l3_mp_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&mainclk>;
-					div-reg = <0x64 0 2>;
-					clk-gate = <0x60 1>;
+					l3_mp_clk: l3_mp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>;
+						div-reg = <0x64 0 2>;
+						clk-gate = <0x60 1>;
 					};
 
-				l3_sp_clk: l3_sp_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&mainclk>;
-					div-reg = <0x64 2 2>;
-				};
+					l3_sp_clk: l3_sp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>;
+						div-reg = <0x64 2 2>;
+					};
 
-				l4_mp_clk: l4_mp_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&mainclk>, <&per_base_clk>;
-					div-reg = <0x64 4 3>;
-					clk-gate = <0x60 2>;
+					l4_mp_clk: l4_mp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>, <&per_base_clk>;
+						div-reg = <0x64 4 3>;
+						clk-gate = <0x60 2>;
 					};
 
-				l4_sp_clk: l4_sp_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&mainclk>, <&per_base_clk>;
-					div-reg = <0x64 7 3>;
-					clk-gate = <0x60 3>;
+					l4_sp_clk: l4_sp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>, <&per_base_clk>;
+						div-reg = <0x64 7 3>;
+						clk-gate = <0x60 3>;
 					};
 
-				dbg_at_clk: dbg_at_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&dbg_base_clk>;
-					div-reg = <0x68 0 2>;
-					clk-gate = <0x60 4>;
+					dbg_at_clk: dbg_at_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_base_clk>;
+						div-reg = <0x68 0 2>;
+						clk-gate = <0x60 4>;
 					};
 
-				dbg_clk: dbg_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&dbg_base_clk>;
-					div-reg = <0x68 2 2>;
-					clk-gate = <0x60 5>;
+					dbg_clk: dbg_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_base_clk>;
+						div-reg = <0x68 2 2>;
+						clk-gate = <0x60 5>;
 					};
 
-				dbg_trace_clk: dbg_trace_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&dbg_base_clk>;
-					div-reg = <0x6C 0 3>;
-					clk-gate = <0x60 6>;
+					dbg_trace_clk: dbg_trace_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_base_clk>;
+						div-reg = <0x6C 0 3>;
+						clk-gate = <0x60 6>;
 					};
 
-				dbg_timer_clk: dbg_timer_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&dbg_base_clk>;
-					clk-gate = <0x60 7>;
+					dbg_timer_clk: dbg_timer_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_base_clk>;
+						clk-gate = <0x60 7>;
 					};
 
-				cfg_clk: cfg_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&cfg_s2f_usr0_clk>;
-					clk-gate = <0x60 8>;
+					cfg_clk: cfg_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&cfg_h2f_usr0_clk>;
+						clk-gate = <0x60 8>;
 					};
 
-				s2f_user0_clk: s2f_user0_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&cfg_s2f_usr0_clk>;
-					clk-gate = <0x60 9>;
+					h2f_user0_clk: h2f_user0_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&cfg_h2f_usr0_clk>;
+						clk-gate = <0x60 9>;
 					};
 
-				emac_0_clk: emac_0_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&emac0_clk>;
-					clk-gate = <0xa0 0>;
+					emac_0_clk: emac_0_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&emac0_clk>;
+						clk-gate = <0xa0 0>;
 					};
 
-				emac_1_clk: emac_1_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&emac1_clk>;
-					clk-gate = <0xa0 1>;
+					emac_1_clk: emac_1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&emac1_clk>;
+						clk-gate = <0xa0 1>;
 					};
 
-				usb_mp_clk: usb_mp_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&per_base_clk>;
-					clk-gate = <0xa0 2>;
-					div-reg = <0xa4 0 3>;
+					usb_mp_clk: usb_mp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 2>;
+						div-reg = <0xa4 0 3>;
 					};
 
-				spi_m_clk: spi_m_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&per_base_clk>;
-					clk-gate = <0xa0 3>;
-					div-reg = <0xa4 3 3>;
+					spi_m_clk: spi_m_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 3>;
+						div-reg = <0xa4 3 3>;
 					};
 
-				can0_clk: can0_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&per_base_clk>;
-					clk-gate = <0xa0 4>;
-					div-reg = <0xa4 6 3>;
+					can0_clk: can0_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 4>;
+						div-reg = <0xa4 6 3>;
 					};
 
-				can1_clk: can1_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&per_base_clk>;
-					clk-gate = <0xa0 5>;
-					div-reg = <0xa4 9 3>;
+					can1_clk: can1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 5>;
+						div-reg = <0xa4 9 3>;
 					};
 
-				gpio_db_clk: gpio_db_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&per_base_clk>;
-					clk-gate = <0xa0 6>;
-					div-reg = <0xa8 0 24>;
+					gpio_db_clk: gpio_db_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 6>;
+						div-reg = <0xa8 0 24>;
 					};
 
-				s2f_user1_clk: s2f_user1_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&s2f_usr1_clk>;
-					clk-gate = <0xa0 7>;
+					h2f_user1_clk: h2f_user1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&h2f_usr1_clk>;
+						clk-gate = <0xa0 7>;
 					};
 
-				sdmmc_clk: sdmmc_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
-					clk-gate = <0xa0 8>;
+					sdmmc_clk: sdmmc_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+						clk-gate = <0xa0 8>;
 					};
 
-				nand_x_clk: nand_x_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
-					clk-gate = <0xa0 9>;
+					nand_x_clk: nand_x_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+						clk-gate = <0xa0 9>;
 					};
 
-				nand_clk: nand_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
-					clk-gate = <0xa0 10>;
-					fixed-divider = <4>;
+					nand_clk: nand_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+						clk-gate = <0xa0 10>;
+						fixed-divider = <4>;
 					};
 
-				qspi_clk: qspi_clk {
-					#clock-cells = <0>;
-					compatible = "altr,socfpga-gate-clk";
-					clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>;
-					clk-gate = <0xa0 11>;
+					qspi_clk: qspi_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>;
+						clk-gate = <0xa0 11>;
 					};
 				};
 			};
@@ -473,28 +473,29 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xfffec600 0x100>;
 			interrupts = <1 13 0xf04>;
+			clocks = <&mpu_periph_clk>;
 		};
 
 		timer0: timer0@ffc08000 {
-			compatible = "snps,dw-apb-timer-sp";
+			compatible = "snps,dw-apb-timer";
 			interrupts = <0 167 4>;
 			reg = <0xffc08000 0x1000>;
 		};
 
 		timer1: timer1@ffc09000 {
-			compatible = "snps,dw-apb-timer-sp";
+			compatible = "snps,dw-apb-timer";
 			interrupts = <0 168 4>;
 			reg = <0xffc09000 0x1000>;
 		};
 
 		timer2: timer2@ffd00000 {
-			compatible = "snps,dw-apb-timer-osc";
+			compatible = "snps,dw-apb-timer";
 			interrupts = <0 169 4>;
 			reg = <0xffd00000 0x1000>;
 		};
 
 		timer3: timer3@ffd01000 {
-			compatible = "snps,dw-apb-timer-osc";
+			compatible = "snps,dw-apb-timer";
 			interrupts = <0 170 4>;
 			reg = <0xffd01000 0x1000>;
 		};
@@ -516,9 +517,9 @@
 		};
 
 		rstmgr@ffd05000 {
-				compatible = "altr,rst-mgr";
-				reg = <0xffd05000 0x1000>;
-			};
+			compatible = "altr,rst-mgr";
+			reg = <0xffd05000 0x1000>;
+		};
 
 		sysmgr@ffd08000 {
 				compatible = "altr,sys-mgr";
diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi
new file mode 100644
index 0000000..a85b404
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_arria5.dtsi
@@ -0,0 +1,58 @@
+/*
+ *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+/include/ "socfpga.dtsi"
+
+/ {
+	soc {
+		clkmgr@ffd04000 {
+			clocks {
+				osc1 {
+					clock-frequency = <25000000>;
+				};
+			};
+		};
+
+		serial0@ffc02000 {
+			clock-frequency = <100000000>;
+		};
+
+		serial1@ffc03000 {
+			clock-frequency = <100000000>;
+		};
+
+		sysmgr@ffd08000 {
+			cpu1-start-addr = <0xffd080c4>;
+		};
+
+		timer0@ffc08000 {
+			clock-frequency = <100000000>;
+		};
+
+		timer1@ffc09000 {
+			clock-frequency = <100000000>;
+		};
+
+		timer2@ffd00000 {
+			clock-frequency = <25000000>;
+		};
+
+		timer3@ffd01000 {
+			clock-frequency = <25000000>;
+		};
+	};
+};
diff --git a/arch/mips/powertv/pci/powertv-pci.h b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
index 1b5886b..5beffb2 100644
--- a/arch/mips/powertv/pci/powertv-pci.h
+++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -1,7 +1,5 @@
 /*
- *				powertv-pci.c
- *
- * Copyright (C) 2009  Cisco Systems, Inc.
+ *  Copyright (C) 2013 Altera Corporation <www.altera.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,18 +12,29 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-/*
- * Local definitions for the powertv PCI code
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef _POWERTV_PCI_POWERTV_PCI_H_
-#define _POWERTV_PCI_POWERTV_PCI_H_
-extern int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
-extern int asic_pcie_init(void);
-extern int asic_pcie_init(void);
+/include/ "socfpga_arria5.dtsi"
+
+/ {
+	model = "Altera SOCFPGA Arria V SoC Development Kit";
+	compatible = "altr,socfpga-arria5", "altr,socfpga";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
 
-extern int log_level;
-#endif
+	aliases {
+		/* this allow the ethaddr uboot environmnet variable contents
+		* to be added to the gmac1 device tree blob.
+		*/
+		ethernet0 = &gmac1;
+	};
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dts b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
index 973999d..a8716f6 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
@@ -19,26 +19,6 @@
 /include/ "socfpga.dtsi"
 
 / {
-	model = "Altera SOCFPGA Cyclone V";
-	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
-
-	chosen {
-		bootargs = "console=ttyS0,57600";
-	};
-
-	memory {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x0 0x40000000>; /* 1GB */
-	};
-
-	aliases {
-		/* this allow the ethaddr uboot environmnet variable contents
-		 * to be added to the gmac1 device tree blob.
-		 */
-		ethernet0 = &gmac1;
-	};
-
 	soc {
 		clkmgr@ffd04000 {
 			clocks {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
new file mode 100644
index 0000000..2ee52ab
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -0,0 +1,40 @@
+/*
+ *  Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/include/ "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Altera SOCFPGA Cyclone V SoC Development Kit";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		/* this allow the ethaddr uboot environmnet variable contents
+		 * to be added to the gmac1 device tree blob.
+		 */
+		ethernet0 = &gmac1;
+	};
+};
diff --git a/arch/mips/include/asm/mach-powertv/irq.h b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index 4bd5d0c..50b99a2 100644
--- a/arch/mips/include/asm/mach-powertv/irq.h
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2009  Cisco Systems, Inc.
+ *  Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -12,14 +12,26 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef _ASM_MACH_POWERTV_IRQ_H
-#define _ASM_MACH_POWERTV_IRQ_H
-#include <asm/mach-powertv/interrupts.h>
+/include/ "socfpga_cyclone5.dtsi"
 
-#define MIPS_CPU_IRQ_BASE	ibase
-#define NR_IRQS			127
-#endif
+/ {
+	model = "Terasic SoCkit";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+};
+
+&gmac1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi b/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi
new file mode 100644
index 0000000..e079996
--- /dev/null
+++ b/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi
@@ -0,0 +1,196 @@
+/*
+ * Copyright 2012 ST-Ericsson
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include "ste-nomadik-pinctrl.dtsi"
+
+/ {
+	soc {
+		pinctrl {
+			uart0 {
+				uart0_default_mux: uart0_mux {
+					default_mux {
+						ste,function = "u0";
+						ste,pins = "u0_a_1";
+					};
+				};
+
+				uart0_default_mode: uart0_default {
+					default_cfg1 {
+						ste,pins = "GPIO0", "GPIO2";
+						ste,config = <&in_pu>;
+					};
+
+					default_cfg2 {
+						ste,pins = "GPIO1", "GPIO3";
+						ste,config = <&out_hi>;
+					};
+				};
+
+				uart0_sleep_mode: uart0_sleep {
+					sleep_cfg1 {
+						ste,pins = "GPIO0", "GPIO2";
+						ste,config = <&slpm_in_pu>;
+					};
+
+					sleep_cfg2 {
+						ste,pins = "GPIO1", "GPIO3";
+						ste,config = <&slpm_out_hi>;
+					};
+				};
+			};
+
+			uart2 {
+				uart2_default_mode: uart2_default {
+					default_mux {
+						ste,function = "u2";
+						ste,pins = "u2txrx_a_1";
+					};
+
+					default_cfg1 {
+						ste,pins = "GPIO120";
+						ste,config = <&in_pu>;
+					};
+
+					default_cfg2 {
+						ste,pins = "GPIO121";
+						ste,config = <&out_hi>;
+					};
+				};
+
+				uart2_sleep_mode: uart2_sleep {
+					sleep_cfg1 {
+						ste,pins = "GPIO120";
+						ste,config = <&slpm_in_pu>;
+					};
+
+					sleep_cfg2 {
+						ste,pins = "GPIO121";
+						ste,config = <&slpm_out_hi>;
+					};
+				};
+			};
+
+			i2c0 {
+				i2c0_default_mux: i2c_mux {
+					default_mux {
+						ste,function = "i2c0";
+						ste,pins = "i2c0_a_1";
+					};
+				};
+
+				i2c0_default_mode: i2c_default {
+					default_cfg1 {
+						ste,pins = "GPIO147", "GPIO148";
+						ste,config = <&in_pu>;
+					};
+				};
+
+				i2c0_sleep_mode: i2c_sleep {
+					sleep_cfg1 {
+						ste,pins = "GPIO147", "GPIO148";
+						ste,config = <&slpm_in_pu>;
+					};
+				};
+			};
+
+			i2c1 {
+				i2c1_default_mux: i2c_mux {
+					default_mux {
+						ste,function = "i2c1";
+						ste,pins = "i2c1_b_2";
+					};
+				};
+
+				i2c1_default_mode: i2c_default {
+					default_cfg1 {
+						ste,pins = "GPIO16", "GPIO17";
+						ste,config = <&in_pu>;
+					};
+				};
+
+				i2c1_sleep_mode: i2c_sleep {
+					sleep_cfg1 {
+						ste,pins = "GPIO16", "GPIO17";
+						ste,config = <&slpm_in_pu>;
+					};
+				};
+			};
+
+			i2c2 {
+				i2c2_default_mux: i2c_mux {
+					default_mux {
+						ste,function = "i2c2";
+						ste,pins = "i2c2_b_2";
+					};
+				};
+
+				i2c2_default_mode: i2c_default {
+					default_cfg1 {
+						ste,pins = "GPIO10", "GPIO11";
+						ste,config = <&in_pu>;
+					};
+				};
+
+				i2c2_sleep_mode: i2c_sleep {
+					sleep_cfg1 {
+						ste,pins = "GPIO11", "GPIO11";
+						ste,config = <&slpm_in_pu>;
+					};
+				};
+			};
+
+			i2c4 {
+				i2c4_default_mux: i2c_mux {
+					default_mux {
+						ste,function = "i2c4";
+						ste,pins = "i2c4_b_2";
+					};
+				};
+
+				i2c4_default_mode: i2c_default {
+					default_cfg1 {
+						ste,pins = "GPIO122", "GPIO123";
+						ste,config = <&in_pu>;
+					};
+				};
+
+				i2c4_sleep_mode: i2c_sleep {
+					sleep_cfg1 {
+						ste,pins = "GPIO122", "GPIO123";
+						ste,config = <&slpm_in_pu>;
+					};
+				};
+			};
+
+			i2c5 {
+				i2c5_default_mux: i2c_mux {
+					default_mux {
+						ste,function = "i2c5";
+						ste,pins = "i2c5_c_2";
+					};
+				};
+
+				i2c5_default_mode: i2c_default {
+					default_cfg1 {
+						ste,pins = "GPIO118", "GPIO119";
+						ste,config = <&in_pu>;
+					};
+				};
+
+				i2c5_sleep_mode: i2c_sleep {
+					sleep_cfg1 {
+						ste,pins = "GPIO118", "GPIO119";
+						ste,config = <&slpm_in_pu>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-ccu8540.dts b/arch/arm/boot/dts/ste-ccu8540.dts
new file mode 100644
index 0000000..7f3baf5
--- /dev/null
+++ b/arch/arm/boot/dts/ste-ccu8540.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2013 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "ste-dbx5x0.dtsi"
+#include "ste-ccu8540-pinctrl.dtsi"
+
+/ {
+	model = "ST-Ericsson U8540 platform with Device Tree";
+	compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
+
+	memory@0 {
+		reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
+	};
+
+	soc {
+		pinctrl {
+			compatible = "stericsson,db8540-pinctrl";
+		};
+
+		prcmu@80157000 {
+			reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x3000>;
+			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
+		};
+
+		uart@80120000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>;
+			pinctrl-1 = <&uart0_sleep_mode>;
+			status = "okay";
+		};
+
+		uart@80121000 {
+			status = "okay";
+		};
+
+		uart@80007000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&uart2_default_mode>;
+			pinctrl-1 = <&uart2_sleep_mode>;
+			status = "okay";
+		};
+
+		i2c0: i2c@80004000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>;
+			pinctrl-1 = <&i2c0_sleep_mode>;
+		};
+
+		i2c1: i2c@80122000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c1_default_mux>, <&i2c1_default_mode>;
+			pinctrl-1 = <&i2c1_sleep_mode>;
+		};
+
+		i2c2: i2c@80128000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c2_default_mux>, <&i2c2_default_mode>;
+			pinctrl-1 = <&i2c2_sleep_mode>;
+		};
+
+		i2c3: i2c@80110000 {
+			status = "disabled";
+		};
+
+		i2c4: i2c@8012a000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c4_default_mux>, <&i2c4_default_mode>;
+			pinctrl-1 = <&i2c4_sleep_mode>;
+		};
+
+		i2c5: i2c@80001000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c5_default_mux>, <&i2c5_default_mode>;
+			pinctrl-1 = <&i2c5_sleep_mode>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ccu9540.dts b/arch/arm/boot/dts/ste-ccu9540.dts
index ed29ec7..2295087 100644
--- a/arch/arm/boot/dts/ccu9540.dts
+++ b/arch/arm/boot/dts/ste-ccu9540.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-#include "dbx5x0.dtsi"
+#include "ste-dbx5x0.dtsi"
 
 / {
 	model = "ST-Ericsson CCU9540 platform with Device Tree";
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index a152945..7da99fe 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -10,6 +10,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/mfd/dbx500-prcmu.h>
 #include "skeleton.dtsi"
 
 / {
@@ -42,16 +43,56 @@
 			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+
+		clocks {
+			compatible = "stericsson,u8500-clks";
+
+			prcmu_clk: prcmu-clock {
+				#clock-cells = <1>;
+			};
+
+			prcc_pclk: prcc-periph-clock {
+				#clock-cells = <2>;
+			};
+
+			prcc_kclk: prcc-kernel-clock {
+				#clock-cells = <2>;
+			};
+
+			rtc_clk: rtc32k-clock {
+				#clock-cells = <0>;
+			};
+
+			smp_twd_clk: smp-twd-clock {
+				#clock-cells = <0>;
+			};
+		};
+
+		mtu@a03c6000 {
+			/* Nomadik System Timer */
+			compatible = "st,nomadik-mtu";
+			reg = <0xa03c6000 0x1000>;
+			interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&prcmu_clk PRCMU_TIMCLK>, <&prcc_pclk 6 6>;
+			clock-names = "timclk", "apb_pclk";
+		};
+
 		timer@a0410600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xa0410600 0x20>;
 			interrupts = <1 13 0x304>; /* IRQ level high per-CPU */
+
+			clocks = <&smp_twd_clk>;
 		};
 
 		rtc@80154000 {
 			compatible = "arm,rtc-pl031", "arm,primecell";
 			reg = <0x80154000 0x1000>;
 			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&rtc_clk>;
+			clock-names = "apb_pclk";
 		};
 
 		gpio0: gpio@8012e000 {
@@ -65,6 +106,8 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <0>;
+
+			clocks = <&prcc_pclk 1 9>;
 		};
 
 		gpio1: gpio@8012e080 {
@@ -78,6 +121,8 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <1>;
+
+			clocks = <&prcc_pclk 1 9>;
 		};
 
 		gpio2: gpio@8000e000 {
@@ -91,6 +136,8 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <2>;
+
+			clocks = <&prcc_pclk 3 8>;
 		};
 
 		gpio3: gpio@8000e080 {
@@ -104,6 +151,8 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <3>;
+
+			clocks = <&prcc_pclk 3 8>;
 		};
 
 		gpio4: gpio@8000e100 {
@@ -117,6 +166,8 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <4>;
+
+			clocks = <&prcc_pclk 3 8>;
 		};
 
 		gpio5: gpio@8000e180 {
@@ -130,6 +181,8 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <5>;
+
+			clocks = <&prcc_pclk 3 8>;
 		};
 
 		gpio6: gpio@8011e000 {
@@ -143,6 +196,8 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <6>;
+
+			clocks = <&prcc_pclk 2 11>;
 		};
 
 		gpio7: gpio@8011e080 {
@@ -156,6 +211,8 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <7>;
+
+			clocks = <&prcc_pclk 2 11>;
 		};
 
 		gpio8: gpio@a03fe000 {
@@ -169,6 +226,8 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-bank = <8>;
+
+			clocks = <&prcc_pclk 5 1>;
 		};
 
 		pinctrl {
@@ -177,8 +236,7 @@
 		};
 
 		usb_per5@a03e0000 {
-			compatible = "stericsson,db8500-musb",
-				"mentor,musb";
+			compatible = "stericsson,db8500-musb";
 			reg = <0xa03e0000 0x10000>;
 			interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "mc";
@@ -210,6 +268,8 @@
 				    "iep_6_14", "oep_6_14",
 				    "iep_7_15", "oep_7_15",
 				    "iep_8",    "oep_8";
+
+			clocks = <&prcc_pclk 5 0>;
 		};
 
 		dma: dma-controller@801C0000 {
@@ -220,6 +280,8 @@
 
 			#dma-cells = <3>;
 			memcpy-channels = <56 57 58 59 60>;
+
+			clocks = <&prcmu_clk PRCMU_DMACLK>;
 		};
 
 		prcmu: prcmu@80157000 {
@@ -238,6 +300,13 @@
 				reg = <0x80157450 0xC>;
 			};
 
+			cpufreq {
+				compatible = "stericsson,cpufreq-ux500";
+				clocks = <&prcmu_clk PRCMU_ARMSS>;
+				clock-names = "armss";
+				status = "disabled";
+			};
+
 			thermal@801573c0 {
 				compatible = "stericsson,db8500-thermal";
 				reg = <0x801573c0 0x40>;
@@ -245,7 +314,7 @@
 					     <22 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
 				status = "disabled";
-			 };
+			};
 
 			db8500-prcmu-regulators {
 				compatible = "stericsson,db8500-prcmu-regulator";
@@ -457,8 +526,36 @@
 					stericsson,earpeice-cmv = <950>; /* Units in mV. */
 				};
 
+				ext_regulators: ab8500-ext-regulators {
+					compatible = "stericsson,ab8500-ext-regulator";
+
+					ab8500_ext1_reg: ab8500_ext1 {
+						regulator-compatible = "ab8500_ext1";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-boot-on;
+						regulator-always-on;
+					};
+
+					ab8500_ext2_reg: ab8500_ext2 {
+						regulator-compatible = "ab8500_ext2";
+						regulator-min-microvolt = <1360000>;
+						regulator-max-microvolt = <1360000>;
+						regulator-boot-on;
+						regulator-always-on;
+					};
+
+					ab8500_ext3_reg: ab8500_ext3 {
+						regulator-compatible = "ab8500_ext3";
+						regulator-min-microvolt = <3400000>;
+						regulator-max-microvolt = <3400000>;
+						regulator-boot-on;
+					};
+				};
+
 				ab8500-regulators {
 					compatible = "stericsson,ab8500-regulator";
+					vin-supply = <&ab8500_ext3_reg>;
 
 					// supplies to the display/camera
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
@@ -531,65 +628,74 @@
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80004000 0x1000>;
 			interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
-			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
 			v-i2c-supply = <&db8500_vape_reg>;
 
 			clock-frequency = <400000>;
+			clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
+			clock-names = "i2cclk", "apb_pclk";
 		};
 
 		i2c@80122000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80122000 0x1000>;
 			interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
-			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
 			v-i2c-supply = <&db8500_vape_reg>;
 
 			clock-frequency = <400000>;
+
+			clocks = <&prcc_kclk 1 2>, <&prcc_pclk 1 2>;
+			clock-names = "i2cclk", "apb_pclk";
 		};
 
 		i2c@80128000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80128000 0x1000>;
 			interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
-			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
 			v-i2c-supply = <&db8500_vape_reg>;
 
 			clock-frequency = <400000>;
+
+			clocks = <&prcc_kclk 1 6>, <&prcc_pclk 1 6>;
+			clock-names = "i2cclk", "apb_pclk";
 		};
 
 		i2c@80110000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80110000 0x1000>;
 			interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
-			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
 			v-i2c-supply = <&db8500_vape_reg>;
 
 			clock-frequency = <400000>;
+
+			clocks = <&prcc_kclk 2 0>, <&prcc_pclk 2 0>;
+			clock-names = "i2cclk", "apb_pclk";
 		};
 
 		i2c@8012a000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x8012a000 0x1000>;
 			interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
-			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
 			v-i2c-supply = <&db8500_vape_reg>;
 
 			clock-frequency = <400000>;
+
+			clocks = <&prcc_kclk 1 9>, <&prcc_pclk 1 10>;
+			clock-names = "i2cclk", "apb_pclk";
 		};
 
 		ssp@80002000 {
@@ -598,7 +704,80 @@
 			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "disabled";
+			clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>;
+			clock-names = "ssp0clk", "apb_pclk";
+			dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */
+			       <&dma 8 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+		};
+
+		ssp@80003000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80003000 0x1000>;
+			interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>;
+			clock-names = "ssp1clk", "apb_pclk";
+			dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */
+			       <&dma 9 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+		};
+
+		spi@8011a000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x8011a000 0x1000>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>;
+			clock-names = "spi0clk", "apb_pclk";
+			dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */
+			       <&dma 0 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+		};
+
+		spi@80112000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80112000 0x1000>;
+			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>;
+			clock-names = "spi1clk", "apb_pclk";
+			dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */
+			       <&dma 35 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+		};
+
+		spi@80111000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80111000 0x1000>;
+			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>;
+			clock-names = "spi2clk", "apb_pclk";
+			dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */
+			       <&dma 33 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+		};
+
+		spi@80129000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80129000 0x1000>;
+			interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>;
+			clock-names = "spi3clk", "apb_pclk";
+			dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */
+			       <&dma 40 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
 		};
 
 		uart@80120000 {
@@ -610,6 +789,9 @@
 			       <&dma 13 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 
+			clocks = <&prcc_kclk 1 0>, <&prcc_pclk 1 0>;
+			clock-names = "uart", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -622,6 +804,9 @@
 			       <&dma 12 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 
+			clocks = <&prcc_kclk 1 1>, <&prcc_pclk 1 1>;
+			clock-names = "uart", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -634,6 +819,9 @@
 			       <&dma 11 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 
+			clocks = <&prcc_kclk 3 6>, <&prcc_pclk 3 6>;
+			clock-names = "uart", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -646,6 +834,9 @@
 			       <&dma 29 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 
+			clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
+			clock-names = "sdi", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -658,6 +849,9 @@
 			       <&dma 32 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 
+			clocks = <&prcc_kclk 2 4>, <&prcc_pclk 2 6>;
+			clock-names = "sdi", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -670,6 +864,9 @@
 			       <&dma 28 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 
+			clocks = <&prcc_kclk 3 4>, <&prcc_pclk 3 4>;
+			clock-names = "sdi", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -677,6 +874,10 @@
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80119000 0x1000>;
 			interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&prcc_kclk 2 5>, <&prcc_pclk 2 7>;
+			clock-names = "sdi", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -689,6 +890,9 @@
 			       <&dma 42 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 
+			clocks = <&prcc_kclk 2 2>, <&prcc_pclk 2 4>;
+			clock-names = "sdi", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -696,6 +900,10 @@
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80008000 0x1000>;
 			interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&prcc_kclk 3 7>, <&prcc_pclk 3 7>;
+			clock-names = "sdi", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -704,6 +912,10 @@
 			reg = <0x80123000 0x1000>;
 			interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
+
+			clocks = <&prcc_kclk 1 3>, <&prcc_pclk 1 3>;
+			clock-names = "msp", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -712,6 +924,10 @@
 			reg = <0x80124000 0x1000>;
 			interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
+
+			clocks = <&prcc_kclk 1 4>, <&prcc_pclk 1 4>;
+			clock-names = "msp", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -721,6 +937,10 @@
 			reg = <0x80117000 0x1000>;
 			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
+
+			clocks = <&prcc_kclk 2 3>, <&prcc_pclk 2 5>;
+			clock-names = "msp", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -729,6 +949,10 @@
 			reg = <0x80125000 0x1000>;
 			interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
+
+			clocks = <&prcc_kclk 1 10>, <&prcc_pclk 1 11>;
+			clock-names = "msp", "apb_pclk";
+
 			status = "disabled";
 		};
 
@@ -744,7 +968,7 @@
 		cpufreq-cooling {
 			compatible = "stericsson,db8500-cpufreq-cooling";
 			status = "disabled";
-		 };
+		};
 
 		vmmci: regulator-gpio {
 			compatible = "regulator-gpio";
@@ -769,6 +993,7 @@
 			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
 
 			v-ape-supply = <&db8500_vape_reg>;
+			clocks = <&prcc_pclk 6 1>;
 		};
 
 		hash@a03c2000 {
@@ -776,6 +1001,7 @@
 			reg = <0xa03c2000 0x1000>;
 
 			v-ape-supply = <&db8500_vape_reg>;
+			clocks = <&prcc_pclk 6 2>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi
index 524e332..76704ec 100644
--- a/arch/arm/boot/dts/stuib.dtsi
+++ b/arch/arm/boot/dts/ste-href-stuib.dtsi
@@ -57,7 +57,6 @@
 			bu21013_tp@5c {
 				compatible = "rohm,bu21013_tp";
 				reg = <0x5c>;
-				touch-gpio = <&gpio2 20 0x4>;
 				avdd-supply = <&ab8500_ldo_aux1_reg>;
 
 				rohm,touch-max-x = <384>;
@@ -68,7 +67,6 @@
 			bu21013_tp@5d {
 				compatible = "rohm,bu21013_tp";
 				reg = <0x5d>;
-				touch-gpio = <&gpio2 20 0x4>;
 				avdd-supply = <&ab8500_ldo_aux1_reg>;
 
 				rohm,touch-max-x = <384>;
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
new file mode 100644
index 0000000..76d3ef1
--- /dev/null
+++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Device Tree for the TVK1281618 UIB
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	soc {
+		/* Add Synaptics touch screen, TC35892 keypad etc here */
+		i2c@80004000 {
+			tc3589x@44 {
+				compatible = "tc3589x";
+				reg = <0x44>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				tc3589x_gpio {
+					compatible = "tc3589x-gpio";
+					interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 9db41b9..aa3f020 100644
--- a/arch/arm/boot/dts/href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -10,7 +10,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
-#include "dbx5x0.dtsi"
+#include "ste-dbx5x0.dtsi"
 
 / {
 	memory {
@@ -41,28 +41,6 @@
 			status = "okay";
 		};
 
-		i2c@80004000 {
-			tc3589x@42 {
-				compatible = "tc3589x";
-				reg = <0x42>;
-				interrupt-parent = <&gpio6>;
-				interrupts = <25 IRQ_TYPE_EDGE_RISING>;
-
-				interrupt-controller;
-				#interrupt-cells = <2>;
-
-				tc3589x_gpio: tc3589x_gpio {
-					compatible = "tc3589x-gpio";
-					interrupts = <0 IRQ_TYPE_EDGE_RISING>;
-
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-			};
-		};
-
 		i2c@80128000 {
 			lp5521@33 {
 				compatible = "national,lp5521";
@@ -72,6 +50,7 @@
 				chan0 {
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
+					linux,default-trigger = "heartbeat";
 				};
 				chan1 {
 					led-cur = /bits/ 8 <0x2f>;
@@ -102,7 +81,7 @@
 			};
 			bh1780@29 {
 				compatible = "rohm,bh1780gli";
-				reg = <0x33>;
+				reg = <0x29>;
 			};
 		};
 
@@ -167,89 +146,11 @@
 		};
 
 		prcmu@80157000 {
-			db8500-prcmu-regulators {
-				db8500_vape_reg: db8500_vape {
-					regulator-name = "db8500-vape";
-				};
-
-				db8500_varm_reg: db8500_varm {
-					regulator-name = "db8500-varm";
-				};
-
-				db8500_vmodem_reg: db8500_vmodem {
-					regulator-name = "db8500-vmodem";
-				};
-
-				db8500_vpll_reg: db8500_vpll {
-					regulator-name = "db8500-vpll";
-				};
-
-				db8500_vsmps1_reg: db8500_vsmps1 {
-					regulator-name = "db8500-vsmps1";
-				};
-
-				db8500_vsmps2_reg: db8500_vsmps2 {
-					regulator-name = "db8500-vsmps2";
-				};
-
-				db8500_vsmps3_reg: db8500_vsmps3 {
-					regulator-name = "db8500-vsmps3";
-				};
-
-				db8500_vrf1_reg: db8500_vrf1 {
-					regulator-name = "db8500-vrf1";
-				};
-
-				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
-					regulator-name = "db8500-sva-mmdsp";
-				};
-
-				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
-					regulator-name = "db8500-sva-mmdsp-ret";
-				};
-
-				db8500_sva_pipe_reg: db8500_sva_pipe {
-					regulator-name = "db8500_sva_pipe";
-				};
-
-				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
-					regulator-name = "db8500_sia_mmdsp";
-				};
-
-				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
-					regulator-name = "db8500-sia-mmdsp-ret";
-				};
-
-				db8500_sia_pipe_reg: db8500_sia_pipe {
-					regulator-name = "db8500-sia-pipe";
-				};
-
-				db8500_sga_reg: db8500_sga {
-					regulator-name = "db8500-sga";
-				};
-
-				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
-					regulator-name = "db8500-b2r2-mcde";
-				};
-
-				db8500_esram12_reg: db8500_esram12 {
-					regulator-name = "db8500-esram12";
-				};
-
-				db8500_esram12_ret_reg: db8500_esram12_ret {
-					regulator-name = "db8500-esram12-ret";
-				};
-
-				db8500_esram34_reg: db8500_esram34 {
-					regulator-name = "db8500-esram34";
-				};
-
-				db8500_esram34_ret_reg: db8500_esram34_ret {
-					regulator-name = "db8500-esram34-ret";
+			ab8500 {
+				ab8500-gpio {
+					compatible = "stericsson,ab8500-gpio";
 				};
-			};
 
-			ab8500 {
 				ab8500-regulators {
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 						regulator-name = "V-DISPLAY";
diff --git a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
new file mode 100644
index 0000000..2b1cb5b
--- /dev/null
+++ b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "ste-hrefprev60.dtsi"
+#include "ste-href-stuib.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF (pre-v60) and ST UIB";
+	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
+
+	soc {
+		/* Reset line for the BU21013 touchscreen */
+		i2c@80110000 {
+			/* Only one of these will be used */
+			bu21013_tp@5c {
+				touch-gpio = <&gpio2 12 0x4>;
+				reset-gpio = <&tc3589x_gpio 13 0x4>;
+			};
+			bu21013_tp@5d {
+				touch-gpio = <&gpio2 12 0x4>;
+				reset-gpio = <&tc3589x_gpio 13 0x4>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
new file mode 100644
index 0000000..59523f8
--- /dev/null
+++ b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "ste-hrefprev60.dtsi"
+#include "ste-href-tvk1281618.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB";
+	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
+};
diff --git a/arch/arm/boot/dts/hrefprev60.dts b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index c6bb07d..b2cd7bc 100644
--- a/arch/arm/boot/dts/hrefprev60.dts
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -7,17 +7,14 @@
  *
  * http://www.opensource.org/licenses/gpl-license.html
  * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Device Tree for the HREF+ prior to the v60 variant.
  */
 
-/dts-v1/;
-#include "dbx5x0.dtsi"
-#include "href.dtsi"
-#include "stuib.dtsi"
+#include "ste-dbx5x0.dtsi"
+#include "ste-href.dtsi"
 
 / {
-	model = "ST-Ericsson HREF (pre-v60) platform with Device Tree";
-	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
-
 	gpio_keys {
 		button@1 {
 			gpios = <&tc3589x_gpio 7 0x4>;
@@ -25,24 +22,30 @@
 	};
 
 	soc {
-		prcmu@80157000 {
-			ab8500@5 {
-				ab8500-gpio {
-					compatible = "stericsson,ab8500-gpio";
-				};
-			};
-		};
-
 		i2c@80004000 {
 			tps61052@33 {
 				compatible = "tps61052";
 				reg = <0x33>;
 			};
-		};
 
-		i2c@80110000 {
-			bu21013_tp@5c {
-				reset-gpio = <&tc3589x_gpio 13 0x4>;
+			tc3589x@42 {
+				compatible = "tc3589x";
+				reg = <0x42>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				tc3589x_gpio: tc3589x_gpio {
+					compatible = "tc3589x-gpio";
+					interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
new file mode 100644
index 0000000..8c6a2de
--- /dev/null
+++ b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Device Tree for the HREF version 60 or later with the ST UIB
+ */
+
+/dts-v1/;
+#include "ste-hrefv60plus.dtsi"
+#include "ste-href-stuib.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF (v60+) and ST UIB";
+	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
+
+	soc {
+		/* Reset line for the BU21013 touchscreen */
+		i2c@80110000 {
+			/* Only one of these will be used */
+			bu21013_tp@5c {
+				touch-gpio = <&gpio2 20 0x4>;
+				reset-gpio = <&gpio4 17 0x4>;
+			};
+			bu21013_tp@5d {
+				touch-gpio = <&gpio2 20 0x4>;
+				reset-gpio = <&gpio4 17 0x4>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
new file mode 100644
index 0000000..d53cccd
--- /dev/null
+++ b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Device Tree for the HREF version 60 or later with the TVK1281618 UIB
+ */
+
+/dts-v1/;
+#include "ste-hrefv60plus.dtsi"
+#include "ste-href-tvk1281618.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB";
+	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
+};
diff --git a/arch/arm/boot/dts/u9540.dts b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index 95892ec..aed511b 100644
--- a/arch/arm/boot/dts/u9540.dts
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -9,30 +9,20 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-/dts-v1/;
-/include/ "dbx5x0.dtsi"
+#include "ste-dbx5x0.dtsi"
+#include "ste-href.dtsi"
 
 / {
-	model = "ST-Ericsson U9540 platform with Device Tree";
-	compatible = "st-ericsson,u9540";
+	model = "ST-Ericsson HREF (v60+) platform with Device Tree";
+	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
 
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	soc-u9500 {
-		uart@80120000 {
-			status = "okay";
-		};
-
-		uart@80121000 {
-			status = "okay";
-		};
-
-		uart@80007000 {
-			status = "okay";
+	gpio_keys {
+		button@1 {
+			gpios = <&gpio5 25 0x4>;
 		};
+	};
 
+	soc {
 		// External Micro SD slot
 		sdi0_per1@80126000 {
 			arm,primecell-periphid = <0x10480180>;
@@ -42,22 +32,30 @@
 			mmc-cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 
-			cd-gpios  = <&gpio7 6 0x4>; // 230
-			cd-inverted;
+			cd-gpios  = <&gpio2 31 0x4>; // 95
 
 			status = "okay";
 		};
 
-
 		// WLAN SDIO channel
 		sdi1_per2@80118000 {
 			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <50000000>;
+			max-frequency = <100000000>;
 			bus-width = <4>;
 
 			status = "okay";
 		};
 
+		// PoP:ed eMMC
+		sdi2_per3@80005000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <8>;
+			mmc-cap-mmc-highspeed;
+
+			status = "okay";
+		};
+
 		// On-board eMMC
 		sdi4_per2@80114000 {
 			arm,primecell-periphid = <0x10480180>;
diff --git a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
new file mode 100644
index 0000000..efddee9
--- /dev/null
+++ b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2012 ST-Ericsson
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <dt-bindings/pinctrl/nomadik.h>
+
+/ {
+	in_nopull: in_nopull {
+		ste,input = <INPUT_NOPULL>;
+	};
+
+	in_pu: input_pull_up {
+		ste,input = <INPUT_PULLUP>;
+	};
+
+	in_pd: input_pull_down {
+		ste,input = <INPUT_PULLDOWN>;
+	};
+
+	out_hi: output_high {
+		ste,output = <OUTPUT_HIGH>;
+	};
+
+	out_lo: output_low {
+		ste,output = <OUTPUT_LOW>;
+	};
+
+	gpio_out_lo: gpio_output_low {
+		ste,gpio = <GPIOMODE_ENABLED>;
+		ste,output = <OUTPUT_LOW>;
+	};
+
+	slpm_in_pu: slpm_in_pu {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-input = <SLPM_INPUT_PULLUP>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+	};
+
+	slpm_in_wkup_pdis: slpm_in_wkup_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-input = <SLPM_DIR_INPUT>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	slpm_out_lo: slpm_out_lo {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-output = <SLPM_OUTPUT_LOW>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+	};
+
+	slpm_out_hi: slpm_out_hi {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-output = <SLPM_OUTPUT_HIGH>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+	};
+
+	slpm_out_hi_wkup_pdis: slpm_out_hi_wkup_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-output = <SLPM_OUTPUT_HIGH>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	slpm_out_wkup_pdis: slpm_out_wkup_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-output = <SLPM_DIR_OUTPUT>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	in_wkup_pdis: in_wkup_pdis {
+		ste,sleep-input = <SLPM_DIR_INPUT>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	out_hi_wkup_pdis: out_hi_wkup_pdis {
+		ste,sleep-output = <SLPM_OUTPUT_HIGH>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	out_wkup_pdis: out_wkup_pdis {
+		ste,sleep-output = <SLPM_DIR_OUTPUT>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+};
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index a3acfa7..79425e3 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -140,18 +140,30 @@
 			};
 		};
 		i2c0 {
+			i2c0_default_mux: i2c0_mux {
+				i2c0_default_mux {
+					ste,function = "i2c0";
+					ste,pins = "i2c0_a_1";
+				};
+			};
 			i2c0_default_mode: i2c0_default {
 				i2c0_default_cfg {
 					ste,pins = "GPIO62_D3", "GPIO63_D2";
-					ste,input = <1>;
+					ste,input = <0>;
 				};
 			};
 		};
 		i2c1 {
+			i2c1_default_mux: i2c1_mux {
+				i2c1_default_mux {
+					ste,function = "i2c1";
+					ste,pins = "i2c1_a_1";
+				};
+			};
 			i2c1_default_mode: i2c1_default {
 				i2c1_default_cfg {
 					ste,pins = "GPIO53_L4", "GPIO54_L3";
-					ste,input = <1>;
+					ste,input = <0>;
 				};
 			};
 		};
@@ -159,7 +171,7 @@
 			i2c2_default_mode: i2c2_default {
 				i2c2_default_cfg {
 					ste,pins = "GPIO73_C21", "GPIO74_C20";
-					ste,input = <1>;
+					ste,input = <0>;
 				};
 			};
 		};
@@ -641,6 +653,7 @@
 		reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
 		clocks = <&hclksmc>;
 		status = "okay";
+		timings = /bits/ 8 <0 0 0 0x10 0x0a 0>;
 
 		partition@0 {
 		label = "X-Loader(NAND)";
@@ -682,29 +695,43 @@
 
 	/* I2C0 connected to the STw4811 power management chip */
 	i2c0 {
-		compatible = "i2c-gpio";
-		gpios = <&gpio1 31 0>, /* sda */
-			<&gpio1 30 0>; /* scl */
+		compatible = "st,nomadik-i2c", "arm,primecell";
+		reg = <0x101f8000 0x1000>;
+		interrupt-parent = <&vica>;
+		interrupts = <20>;
+		clock-frequency = <100000>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&i2c0clk>, <&pclki2c0>;
+		clock-names = "mclk", "apb_pclk";
 		pinctrl-names = "default";
-		pinctrl-0 = <&i2c0_default_mode>;
+		pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>;
 
 		stw4811@2d {
-			   compatible = "st,stw4811";
-			   reg = <0x2d>;
+			compatible = "st,stw4811";
+			reg = <0x2d>;
+			vmmc_regulator: vmmc {
+				compatible = "st,stw481x-vmmc";
+				regulator-name = "VMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
 		};
 	};
 
 	/* I2C1 connected to various sensors */
 	i2c1 {
-		compatible = "i2c-gpio";
-		gpios = <&gpio1 22 0>, /* sda */
-			<&gpio1 21 0>; /* scl */
+		compatible = "st,nomadik-i2c", "arm,primecell";
+		reg = <0x101f7000 0x1000>;
+		interrupt-parent = <&vica>;
+		interrupts = <21>;
+		clock-frequency = <100000>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&i2c1clk>, <&pclki2c1>;
+		clock-names = "mclk", "apb_pclk";
 		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_default_mode>;
+		pinctrl-0 = <&i2c1_default_mux>, <&i2c1_default_mode>;
 
 		camera@2d {
 			   compatible = "st,camera";
@@ -819,6 +846,7 @@
 			cd-inverted;
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
+			vmmc-supply = <&vmmc_regulator>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 49824be..f0b39f8 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-#include "dbx5x0.dtsi"
+#include "ste-dbx5x0.dtsi"
 
 / {
 	model = "Calao Systems Snowball platform with device tree";
@@ -111,12 +111,13 @@
 				vdd33a-supply = <&en_3v3_reg>;
 				vddvario-supply = <&db8500_vape_reg>;
 
-
 				reg-shift = <1>;
 				reg-io-width = <2>;
 				smsc,force-internal-phy;
 				smsc,irq-active-high;
 				smsc,irq-push-pull;
+
+				clocks = <&prcc_pclk 3 0>;
 			};
 		};
 
@@ -165,119 +166,13 @@
 			status = "okay";
 		};
 
-		i2c@80004000 {
-			tc3589x@42 {
-				//compatible = "tc3589x";
-				reg = <0x42>;
-				gpios = <&gpio6 25 0x4>;
-				interrupt-parent = <&gpio6>;
-			};
-			tps61052@33 {
-				//compatible = "tps61052";
-				reg = <0x33>;
-			};
-		};
-
-		i2c@80128000 {
-			lp5521@33 {
-				// compatible = "lp5521";
-				reg = <0x33>;
-			};
-			lp5521@34 {
-				// compatible = "lp5521";
-				reg = <0x34>;
-			};
-			bh1780@29 {
-				// compatible = "rohm,bh1780gli";
-				reg = <0x33>;
-			};
-		};
-
 		cpufreq-cooling {
 			status = "okay";
 		};
 
 		prcmu@80157000 {
-			db8500-prcmu-regulators {
-				db8500_vape_reg: db8500_vape {
-					regulator-name = "db8500-vape";
-				};
-
-				db8500_varm_reg: db8500_varm {
-					regulator-name = "db8500-varm";
-				};
-
-				db8500_vmodem_reg: db8500_vmodem {
-					regulator-name = "db8500-vmodem";
-				};
-
-				db8500_vpll_reg: db8500_vpll {
-					regulator-name = "db8500-vpll";
-				};
-
-				db8500_vsmps1_reg: db8500_vsmps1 {
-					regulator-name = "db8500-vsmps1";
-				};
-
-				db8500_vsmps2_reg: db8500_vsmps2 {
-					regulator-name = "db8500-vsmps2";
-				};
-
-				db8500_vsmps3_reg: db8500_vsmps3 {
-					regulator-name = "db8500-vsmps3";
-				};
-
-				db8500_vrf1_reg: db8500_vrf1 {
-					regulator-name = "db8500-vrf1";
-				};
-
-				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
-					regulator-name = "db8500-sva-mmdsp";
-				};
-
-				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
-					regulator-name = "db8500-sva-mmdsp-ret";
-				};
-
-				db8500_sva_pipe_reg: db8500_sva_pipe {
-					regulator-name = "db8500_sva_pipe";
-				};
-
-				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
-					regulator-name = "db8500_sia_mmdsp";
-				};
-
-				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
-					regulator-name = "db8500-sia-mmdsp-ret";
-				};
-
-				db8500_sia_pipe_reg: db8500_sia_pipe {
-					regulator-name = "db8500-sia-pipe";
-				};
-
-				db8500_sga_reg: db8500_sga {
-					regulator-name = "db8500-sga";
-				};
-
-				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
-					regulator-name = "db8500-b2r2-mcde";
-				};
-
-				db8500_esram12_reg: db8500_esram12 {
-					regulator-name = "db8500-esram12";
-				};
-
-				db8500_esram12_ret_reg: db8500_esram12_ret {
-					regulator-name = "db8500-esram12-ret";
-				};
-
-				db8500_esram34_reg: db8500_esram34 {
-					regulator-name = "db8500-esram34";
-				};
-
-				db8500_esram34_ret_reg: db8500_esram34_ret {
-					regulator-name = "db8500-esram34-ret";
-				};
+			cpufreq {
+				status = "okay";
 			};
 
 			thermal@801573c0 {
@@ -310,6 +205,20 @@
 					compatible = "stericsson,ab8500-gpio";
 				};
 
+				ext_regulators: ab8500-ext-regulators {
+					ab8500_ext1_reg: ab8500_ext1 {
+						regulator-name = "ab8500-ext-supply1";
+					};
+
+					ab8500_ext2_reg_reg: ab8500_ext2 {
+						regulator-name = "ab8500-ext-supply2";
+					};
+
+					ab8500_ext3_reg_reg: ab8500_ext3 {
+						regulator-name = "ab8500-ext-supply3";
+					};
+				};
+
 				ab8500-regulators {
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 						regulator-name = "V-DISPLAY";
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
new file mode 100644
index 0000000..eb4d73b
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -0,0 +1,101 @@
+/*
+ * Copyright 2013 Emilio López
+ *
+ * Emilio López <emilio@elopez.com.ar>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun4i-a10.dtsi"
+
+/ {
+	model = "Mele A1000";
+	compatible = "mele,a1000", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	soc@01c00000 {
+		emac: ethernet@01c0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins_a>;
+			phy = <&phy1>;
+			status = "okay";
+		};
+
+		mdio@01c0b080 {
+			phy-supply = <&reg_emac_3v3>;
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		pinctrl@01c20800 {
+			emac_power_pin_a1000: emac_power_pin@0 {
+				allwinner,pins = "PH15";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			led_pins_a1000: led_pins@0 {
+				allwinner,pins = "PH10", "PH20";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_a1000>;
+
+		red {
+			label = "a1000:red:usr";
+			gpios = <&pio 7 10 0>;
+		};
+
+		blue {
+			label = "a1000:blue:usr";
+			gpios = <&pio 7 20 0>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_emac_3v3: emac-3v3 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_power_pin_a1000>;
+			regulator-name = "emac-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&pio 7 15 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index 757c4cd..425a7db 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -26,7 +26,7 @@
 		bootargs = "earlyprintk console=ttyS0,115200";
 	};
 
-	soc@01c20000 {
+	soc@01c00000 {
 		emac: ethernet@01c0b000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&emac_pins_a>;
@@ -76,12 +76,12 @@
 		pinctrl-0 = <&led_pins_cubieboard>;
 
 		blue {
-			label = "cubieboard::blue";
+			label = "cubieboard:blue:usr";
 			gpios = <&pio 7 21 0>; /* LED1 */
 		};
 
 		green {
-			label = "cubieboard::green";
+			label = "cubieboard:green:usr";
 			gpios = <&pio 7 20 0>; /* LED2 */
 			linux,default-trigger = "heartbeat";
 		};
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
index 3514b37..b3ae51f 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -22,7 +22,7 @@
 		bootargs = "earlyprintk console=ttyS0,115200";
 	};
 
-	soc@01c20000 {
+	soc@01c00000 {
 		emac: ethernet@01c0b000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&emac_pins_a>;
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
index 078ed7f..0c1447c 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -22,7 +22,7 @@
 		bootargs = "earlyprintk console=ttyS0,115200";
 	};
 
-	soc@01c20000 {
+	soc@01c00000 {
 		uart0: serial@01c28000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index b2bd6e1..319cc6b 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -160,11 +160,10 @@
 		};
 	};
 
-	soc@01c20000 {
+	soc@01c00000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		reg = <0x01c20000 0x300000>;
 		ranges;
 
 		emac: ethernet@01c0b000 {
@@ -267,6 +266,11 @@
 			reg = <0x01c20c90 0x10>;
 		};
 
+		sid: eeprom@01c23800 {
+			compatible = "allwinner,sun4i-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index 64dc0c4..3c9f8b3 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -18,7 +18,7 @@
 	model = "Olimex A10s-Olinuxino Micro";
 	compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s";
 
-	soc@01c20000 {
+	soc@01c00000 {
 		emac: ethernet@01c0b000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&emac_pins_a>;
@@ -60,6 +60,31 @@
 			pinctrl-0 = <&uart3_pins_a>;
 			status = "okay";
 		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+		};
+
+		i2c1: i2c@01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+
+			at24@50 {
+				compatible = "at,24c16";
+				pagesize = <16>;
+				reg = <0x50>;
+				read-only;
+			};
+		};
+
+		i2c2: i2c@01c2b400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins_a>;
+			status = "okay";
+		};
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index 2307ce8..5247674 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -95,20 +95,16 @@
 
 		ahb_gates: ahb_gates@01c20060 {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-ahb-gates-clk";
+			compatible = "allwinner,sun5i-a10s-ahb-gates-clk";
 			reg = <0x01c20060 0x8>;
 			clocks = <&ahb>;
-			clock-output-names = "ahb_usb0", "ahb_ehci0",
-				"ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss",
-				"ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1",
-				"ahb_mmc2", "ahb_mmc3", "ahb_ms", "ahb_nand",
-				"ahb_sdram", "ahb_ace",	"ahb_emac", "ahb_ts",
-				"ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_spi3",
-				"ahb_pata", "ahb_sata", "ahb_gps", "ahb_ve",
-				"ahb_tvd", "ahb_tve0", "ahb_tve1", "ahb_lcd0",
-				"ahb_lcd1", "ahb_csi0", "ahb_csi1", "ahb_hdmi",
-				"ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
-				"ahb_de_fe1", "ahb_mp", "ahb_mali400";
+			clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
+				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
+				"ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
+				"ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
+				"ahb_spi2", "ahb_gps", "ahb_stimer", "ahb_ve",
+				"ahb_tve", "ahb_lcd", "ahb_csi", "ahb_hdmi",
+				"ahb_de_be", "ahb_de_fe", "ahb_iep", "ahb_mali400";
 		};
 
 		apb0: apb0@01c20054 {
@@ -120,12 +116,11 @@
 
 		apb0_gates: apb0_gates@01c20068 {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-apb0-gates-clk";
+			compatible = "allwinner,sun5i-a10s-apb0-gates-clk";
 			reg = <0x01c20068 0x4>;
 			clocks = <&apb0>;
-			clock-output-names = "apb0_codec", "apb0_spdif",
-				"apb0_ac97", "apb0_iis", "apb0_pio", "apb0_ir0",
-				"apb0_ir1", "apb0_keypad";
+			clock-output-names = "apb0_codec", "apb0_iis", "apb0_pio",
+				"apb0_ir", "apb0_keypad";
 		};
 
 		/* dummy is pll62 */
@@ -145,23 +140,19 @@
 
 		apb1_gates: apb1_gates@01c2006c {
 			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-apb1-gates-clk";
+			compatible = "allwinner,sun5i-a10s-apb1-gates-clk";
 			reg = <0x01c2006c 0x4>;
 			clocks = <&apb1>;
 			clock-output-names = "apb1_i2c0", "apb1_i2c1",
-				"apb1_i2c2", "apb1_can", "apb1_scr",
-				"apb1_ps20", "apb1_ps21", "apb1_uart0",
-				"apb1_uart1", "apb1_uart2", "apb1_uart3",
-				"apb1_uart4", "apb1_uart5", "apb1_uart6",
-				"apb1_uart7";
+				"apb1_i2c2", "apb1_uart0", "apb1_uart1",
+				"apb1_uart2", "apb1_uart3";
 		};
 	};
 
-	soc@01c20000 {
+	soc@01c00000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		reg = <0x01c20000 0x300000>;
 		ranges;
 
 		emac: ethernet@01c0b000 {
@@ -229,6 +220,27 @@
 				allwinner,drive = <0>;
 				allwinner,pull = <0>;
 			};
+
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PB0", "PB1";
+				allwinner,function = "i2c0";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PB15", "PB16";
+				allwinner,function = "i2c1";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PB17", "PB18";
+				allwinner,function = "i2c2";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
 		};
 
 		timer@01c20c00 {
@@ -243,6 +255,11 @@
 			reg = <0x01c20c90 0x10>;
 		};
 
+		sid: eeprom@01c23800 {
+			compatible = "allwinner,sun4i-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
@@ -282,5 +299,38 @@
 			clocks = <&apb1_gates 19>;
 			status = "disabled";
 		};
+
+		i2c0: i2c@01c2ac00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <7>;
+			clocks = <&apb1_gates 0>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@01c2b000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <8>;
+			clocks = <&apb1_gates 1>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@01c2b400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <9>;
+			clocks = <&apb1_gates 2>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index 80497e3..9e508dc 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -22,7 +22,7 @@
 		bootargs = "earlyprintk console=ttyS0,115200";
 	};
 
-	soc@01c20000 {
+	soc@01c00000 {
 		pinctrl@01c20800 {
 			led_pins_olinuxino: led_pins@0 {
 				allwinner,pins = "PG9";
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 7363211..ce8ef2a 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -150,11 +150,10 @@
 		};
 	};
 
-	soc@01c20000 {
+	soc@01c00000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		reg = <0x01c20000 0x300000>;
 		ranges;
 
 		intc: interrupt-controller@01c20400 {
@@ -223,6 +222,11 @@
 			reg = <0x01c20c90 0x10>;
 		};
 
+		sid: eeprom@01c23800 {
+			compatible = "allwinner,sun4i-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
 		uart1: serial@01c28400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28400 0x400>;
diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts
new file mode 100644
index 0000000..e5adae3
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun6i-a31.dtsi"
+
+/ {
+	model = "WITS A31 Colombus Evaluation Board";
+	compatible = "wits,colombus", "allwinner,sun6i-a31";
+
+	chosen {
+		bootargs = "earlyprintk console=ttyS0,115200";
+	};
+
+	soc@01c00000 {
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
new file mode 100644
index 0000000..c1751a6
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -0,0 +1,299 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+		};
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		osc32k: osc32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		pll1: pll1@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun6i-a31-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+		};
+
+		/*
+		 * This is a dummy clock, to be used as placeholder on
+		 * other mux clocks when a specific parent clock is not
+		 * yet implemented. It should be dropped when the driver
+		 * is complete.
+		 */
+		pll6: pll6 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		cpu: cpu@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-cpu-clk";
+			reg = <0x01c20050 0x4>;
+
+			/*
+			 * PLL1 is listed twice here.
+			 * While it looks suspicious, it's actually documented
+			 * that way both in the datasheet and in the code from
+			 * Allwinner.
+			 */
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
+		};
+
+		axi: axi@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-axi-clk";
+			reg = <0x01c20050 0x4>;
+			clocks = <&cpu>;
+		};
+
+		ahb1_mux: ahb1_mux@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun6i-a31-ahb1-mux-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>;
+		};
+
+		ahb1: ahb1@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-ahb-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb1_mux>;
+		};
+
+		ahb1_gates: ahb1_gates@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-ahb1-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb1>;
+			clock-output-names = "ahb1_mipidsi", "ahb1_ss",
+					"ahb1_dma", "ahb1_mmc0", "ahb1_mmc1",
+					"ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1",
+					"ahb1_nand0", "ahb1_sdram",
+					"ahb1_gmac", "ahb1_ts", "ahb1_hstimer",
+					"ahb1_spi0", "ahb1_spi1", "ahb1_spi2",
+					"ahb1_spi3", "ahb1_otg", "ahb1_ehci0",
+					"ahb1_ehci1", "ahb1_ohci0",
+					"ahb1_ohci1", "ahb1_ohci2", "ahb1_ve",
+					"ahb1_lcd0", "ahb1_lcd1", "ahb1_csi",
+					"ahb1_hdmi", "ahb1_de0", "ahb1_de1",
+					"ahb1_fe0", "ahb1_fe1", "ahb1_mp",
+					"ahb1_gpu", "ahb1_deu0", "ahb1_deu1",
+					"ahb1_drc0", "ahb1_drc1";
+		};
+
+		apb1: apb1@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb1>;
+		};
+
+		apb1_gates: apb1_gates@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-apb1-gates-clk";
+			reg = <0x01c20068 0x4>;
+			clocks = <&apb1>;
+			clock-output-names = "apb1_codec", "apb1_digital_mic",
+					"apb1_pio", "apb1_daudio0",
+					"apb1_daudio1";
+		};
+
+		apb2_mux: apb2_mux@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-apb1-mux-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
+		};
+
+		apb2: apb2@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun6i-a31-apb2-div-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&apb2_mux>;
+		};
+
+		apb2_gates: apb2_gates@01c2006c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-apb2-gates-clk";
+			reg = <0x01c2006c 0x4>;
+			clocks = <&apb2>;
+			clock-output-names = "apb2_i2c0", "apb2_i2c1",
+					"apb2_i2c2", "apb2_i2c3", "apb2_uart0",
+					"apb2_uart1", "apb2_uart2", "apb2_uart3",
+					"apb2_uart4", "apb2_uart5";
+		};
+	};
+
+	soc@01c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pio: pinctrl@01c20800 {
+			compatible = "allwinner,sun6i-a31-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <0 11 1>, <0 15 1>, <0 16 1>, <0 17 1>;
+			clocks = <&apb1_gates 5>;
+			gpio-controller;
+			interrupt-controller;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PH20", "PH21";
+				allwinner,function = "uart0";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <0 18 1>,
+				     <0 19 1>,
+				     <0 20 1>,
+				     <0 21 1>,
+				     <0 22 1>;
+			clocks = <&osc24M>;
+		};
+
+		wdt1: watchdog@01c20ca0 {
+			compatible = "allwinner,sun6i-wdt";
+			reg = <0x01c20ca0 0x20>;
+		};
+
+		uart0: serial@01c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <0 0 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 16>;
+			status = "disabled";
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <0 1 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 17>;
+			status = "disabled";
+		};
+
+		uart2: serial@01c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <0 2 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 18>;
+			status = "disabled";
+		};
+
+		uart3: serial@01c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <0 3 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 19>;
+			status = "disabled";
+		};
+
+		uart4: serial@01c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <0 4 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 20>;
+			status = "disabled";
+		};
+
+		uart5: serial@01c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <0 5 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 21>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@01c81000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x1000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <1 9 0xf04>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
new file mode 100644
index 0000000..5c51cb8
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun7i-a20.dtsi"
+
+/ {
+	model = "Cubietech Cubieboard2";
+	compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
+
+	soc@01c00000 {
+		emac: ethernet@01c0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins_a>;
+			phy = <&phy1>;
+			status = "okay";
+		};
+
+		mdio@01c0b080 {
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		pinctrl@01c20800 {
+			led_pins_cubieboard2: led_pins@0 {
+				allwinner,pins = "PH20", "PH21";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+		};
+
+		i2c1: i2c@01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_cubieboard2>;
+
+		blue {
+			label = "cubieboard2:blue:usr";
+			gpios = <&pio 7 21 0>;
+		};
+
+		green {
+			label = "cubieboard2:green:usr";
+			gpios = <&pio 7 20 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
new file mode 100644
index 0000000..8a1009d
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2013 Oliver Schinagl
+ *
+ * Oliver Schinagl <oliver@schinagl.nl>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun7i-a20.dtsi"
+
+/ {
+	model = "Cubietech Cubietruck";
+	compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
+
+	soc@01c00000 {
+		pinctrl@01c20800 {
+			led_pins_cubietruck: led_pins@0 {
+				allwinner,pins = "PH7", "PH11", "PH20", "PH21";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_cubietruck>;
+
+		blue {
+			label = "cubietruck:blue:usr";
+			gpios = <&pio 7 21 0>;
+		};
+
+		orange {
+			label = "cubietruck:orange:usr";
+			gpios = <&pio 7 20 0>;
+		};
+
+		white {
+			label = "cubietruck:white:usr";
+			gpios = <&pio 7 11 0>;
+		};
+
+		green {
+			label = "cubietruck:green:usr";
+			gpios = <&pio 7 7 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
new file mode 100644
index 0000000..ead3013
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -0,0 +1,94 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun7i-a20.dtsi"
+
+/ {
+	model = "Olimex A20-Olinuxino Micro";
+	compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20";
+
+	soc@01c00000 {
+		emac: ethernet@01c0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins_a>;
+			phy = <&phy1>;
+			status = "okay";
+		};
+
+		mdio@01c0b080 {
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		pinctrl@01c20800 {
+			led_pins_olinuxino: led_pins@0 {
+				allwinner,pins = "PH2";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <1>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		uart6: serial@01c29800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart6_pins_a>;
+			status = "okay";
+		};
+
+		uart7: serial@01c29c00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart7_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+		};
+
+		i2c1: i2c@01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+		};
+
+		i2c2: i2c@01c2b400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins_a>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxino>;
+
+		green {
+			label = "a20-olinuxino-micro:green:usr";
+			gpios = <&pio 7 2 0>;
+			default-state = "on";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
new file mode 100644
index 0000000..e46cfed
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -0,0 +1,409 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-osc-clk";
+			reg = <0x01c20050 0x4>;
+			clock-frequency = <24000000>;
+		};
+
+		osc32k: osc32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		pll1: pll1@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+		};
+
+		/*
+		 * This is a dummy clock, to be used as placeholder on
+		 * other mux clocks when a specific parent clock is not
+		 * yet implemented. It should be dropped when the driver
+		 * is complete.
+		 */
+		pll6: pll6 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		cpu: cpu@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-cpu-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6>;
+		};
+
+		axi: axi@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-axi-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&cpu>;
+		};
+
+		ahb: ahb@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-ahb-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&axi>;
+		};
+
+		ahb_gates: ahb_gates@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun7i-a20-ahb-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb>;
+			clock-output-names = "ahb_usb0", "ahb_ehci0",
+				"ahb_ohci0", "ahb_ehci1", "ahb_ohci1",
+				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
+				"ahb_mmc1", "ahb_mmc2", "ahb_mmc3", "ahb_ms",
+				"ahb_nand", "ahb_sdram", "ahb_ace",
+				"ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
+				"ahb_spi2", "ahb_spi3", "ahb_sata",
+				"ahb_hstimer", "ahb_ve", "ahb_tvd", "ahb_tve0",
+				"ahb_tve1", "ahb_lcd0", "ahb_lcd1", "ahb_csi0",
+				"ahb_csi1", "ahb_hdmi1", "ahb_hdmi0",
+				"ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
+				"ahb_de_fe1", "ahb_gmac", "ahb_mp",
+				"ahb_mali";
+		};
+
+		apb0: apb0@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb>;
+		};
+
+		apb0_gates: apb0_gates@01c20068 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun7i-a20-apb0-gates-clk";
+			reg = <0x01c20068 0x4>;
+			clocks = <&apb0>;
+			clock-output-names = "apb0_codec", "apb0_spdif",
+				"apb0_ac97", "apb0_iis0", "apb0_iis1",
+				"apb0_pio", "apb0_ir0", "apb0_ir1",
+				"apb0_iis2", "apb0_keypad";
+		};
+
+		apb1_mux: apb1_mux@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-apb1-mux-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc24M>, <&pll6>, <&osc32k>;
+		};
+
+		apb1: apb1@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-apb1-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&apb1_mux>;
+		};
+
+		apb1_gates: apb1_gates@01c2006c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun7i-a20-apb1-gates-clk";
+			reg = <0x01c2006c 0x4>;
+			clocks = <&apb1>;
+			clock-output-names = "apb1_i2c0", "apb1_i2c1",
+				"apb1_i2c2", "apb1_i2c3", "apb1_can",
+				"apb1_scr", "apb1_ps20", "apb1_ps21",
+				"apb1_i2c4", "apb1_uart0", "apb1_uart1",
+				"apb1_uart2", "apb1_uart3", "apb1_uart4",
+				"apb1_uart5", "apb1_uart6", "apb1_uart7";
+		};
+	};
+
+	soc@01c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		emac: ethernet@01c0b000 {
+			compatible = "allwinner,sun4i-emac";
+			reg = <0x01c0b000 0x1000>;
+			interrupts = <0 55 1>;
+			clocks = <&ahb_gates 17>;
+			status = "disabled";
+		};
+
+		mdio@01c0b080 {
+			compatible = "allwinner,sun4i-mdio";
+			reg = <0x01c0b080 0x14>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pio: pinctrl@01c20800 {
+			compatible = "allwinner,sun7i-a20-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <0 28 1>;
+			clocks = <&apb0_gates 5>;
+			gpio-controller;
+			interrupt-controller;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PB22", "PB23";
+				allwinner,function = "uart0";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			uart6_pins_a: uart6@0 {
+				allwinner,pins = "PI12", "PI13";
+				allwinner,function = "uart6";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			uart7_pins_a: uart7@0 {
+				allwinner,pins = "PI20", "PI21";
+				allwinner,function = "uart7";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PB0", "PB1";
+				allwinner,function = "i2c0";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PB18", "PB19";
+				allwinner,function = "i2c1";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PB20", "PB21";
+				allwinner,function = "i2c2";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			emac_pins_a: emac0@0 {
+				allwinner,pins = "PA0", "PA1", "PA2",
+						"PA3", "PA4", "PA5", "PA6",
+						"PA7", "PA8", "PA9", "PA10",
+						"PA11", "PA12", "PA13", "PA14",
+						"PA15", "PA16";
+				allwinner,function = "emac";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <0 22 1>,
+				     <0 23 1>,
+				     <0 24 1>,
+				     <0 25 1>,
+				     <0 67 1>,
+				     <0 68 1>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@01c20c90 {
+			compatible = "allwinner,sun4i-wdt";
+			reg = <0x01c20c90 0x10>;
+		};
+
+		sid: eeprom@01c23800 {
+			compatible = "allwinner,sun7i-a20-sid";
+			reg = <0x01c23800 0x200>;
+		};
+
+		uart0: serial@01c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <0 1 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 16>;
+			status = "disabled";
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <0 2 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 17>;
+			status = "disabled";
+		};
+
+		uart2: serial@01c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <0 3 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 18>;
+			status = "disabled";
+		};
+
+		uart3: serial@01c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <0 4 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 19>;
+			status = "disabled";
+		};
+
+		uart4: serial@01c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <0 17 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 20>;
+			status = "disabled";
+		};
+
+		uart5: serial@01c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <0 18 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 21>;
+			status = "disabled";
+		};
+
+		uart6: serial@01c29800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29800 0x400>;
+			interrupts = <0 19 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 22>;
+			status = "disabled";
+		};
+
+		uart7: serial@01c29c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29c00 0x400>;
+			interrupts = <0 20 1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 23>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <0 7 1>;
+			clocks = <&apb1_gates 0>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@01c2b000 {
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <0 8 1>;
+			clocks = <&apb1_gates 1>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@01c2b400 {
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <0 9 1>;
+			clocks = <&apb1_gates 2>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@01c2b800 {
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2b800 0x400>;
+			interrupts = <0 88 1>;
+			clocks = <&apb1_gates 3>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@01c2bc00 {
+			compatible = "allwinner,sun4i-i2c";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <0 89 1>;
+			clocks = <&apb1_gates 15>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@01c81000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x1000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <1 9 0xf04>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index cb640eb..cb5ec23 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -1,5 +1,6 @@
 /dts-v1/;
 
+#include <dt-bindings/input/input.h>
 #include "tegra114.dtsi"
 
 / {
@@ -738,6 +739,14 @@
 			realtek,ldo1-en-gpios =
 				<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&palmas_ldo6_reg>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
+		};
 	};
 
 	i2c@7000d000 {
@@ -791,7 +800,7 @@
 					regulator-boot-on;
 				};
 
-				dcdc3 {
+				tps65090_dcdc3_reg: dcdc3 {
 					regulator-name = "vdd-ao";
 					regulator-always-on;
 					regulator-boot-on;
@@ -836,6 +845,195 @@
 				};
 			};
 		};
+
+		palmas: tps65913 {
+			compatible = "ti,palmas";
+			reg = <0x58>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			palmas_gpio: gpio {
+				compatible = "ti,palmas-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pmic {
+				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+				smps1-in-supply = <&tps65090_dcdc3_reg>;
+				smps3-in-supply = <&tps65090_dcdc3_reg>;
+				smps4-in-supply = <&tps65090_dcdc2_reg>;
+				smps7-in-supply = <&tps65090_dcdc2_reg>;
+				smps8-in-supply = <&tps65090_dcdc2_reg>;
+				smps9-in-supply = <&tps65090_dcdc2_reg>;
+				ldo1-in-supply = <&tps65090_dcdc2_reg>;
+				ldo2-in-supply = <&tps65090_dcdc2_reg>;
+				ldo3-in-supply = <&palmas_smps3_reg>;
+				ldo4-in-supply = <&tps65090_dcdc2_reg>;
+				ldo5-in-supply = <&vdd_ac_bat_reg>;
+				ldo6-in-supply = <&tps65090_dcdc2_reg>;
+				ldo7-in-supply = <&tps65090_dcdc2_reg>;
+				ldo8-in-supply = <&tps65090_dcdc3_reg>;
+				ldo9-in-supply = <&palmas_smps9_reg>;
+				ldoln-in-supply = <&tps65090_dcdc1_reg>;
+				ldousb-in-supply = <&tps65090_dcdc1_reg>;
+
+				regulators {
+					smps12 {
+						regulator-name = "vddio-ddr";
+						regulator-min-microvolt = <1350000>;
+						regulator-max-microvolt = <1350000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					palmas_smps3_reg: smps3 {
+						regulator-name = "vddio-1v8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps45 {
+						regulator-name = "vdd-core";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1400000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps457 {
+						regulator-name = "vdd-core";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1400000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps8 {
+						regulator-name = "avdd-pll";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					palmas_smps9_reg: smps9 {
+						regulator-name = "sdhci-vdd-sd-slot";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+						regulator-always-on;
+					};
+
+					ldo1 {
+						regulator-name = "avdd-cam1";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					ldo2 {
+						regulator-name = "avdd-cam2";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					ldo3 {
+						regulator-name = "avdd-dsi-csi";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo4 {
+						regulator-name = "vpp-fuse";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					palmas_ldo6_reg: ldo6 {
+						regulator-name = "vdd-sensor-2v85";
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					ldo7 {
+						regulator-name = "vdd-af-cam1";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					ldo8 {
+						regulator-name = "vdd-rtc";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <900000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,enable-ldo8-tracking;
+					};
+
+					ldo9 {
+						regulator-name = "vddio-sdmmc-2";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldoln {
+						regulator-name = "hvdd-usb";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ldousb {
+						regulator-name = "avdd-usb";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					regen1 {
+						regulator-name = "rail-3v3";
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					regen2 {
+						regulator-name = "rail-5v0";
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+				};
+			};
+
+			rtc {
+				compatible = "ti,palmas-rtc";
+				interrupt-parent = <&palmas>;
+				interrupts = <8 0>;
+			};
+
+			pinmux {
+				compatible = "ti,tps65913-pinctrl";
+				pinctrl-names = "default";
+				pinctrl-0 = <&palmas_default>;
+
+				palmas_default: pinmux {
+					pin_gpio6 {
+						pins = "gpio6";
+						function = "gpio";
+					};
+				};
+			};
+		};
 	};
 
 	spi@7000da00 {
@@ -850,6 +1048,13 @@
 
 	pmc {
 		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
 	};
 
 	ahub {
@@ -870,6 +1075,15 @@
 		non-removable;
 	};
 
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&usb3_vbus_reg>;
+	};
+
 	clocks {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -883,6 +1097,35 @@
 		};
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		home {
+			label = "Home";
+			gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+
+		volume_down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		volume_up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -951,6 +1194,16 @@
 			gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
 			vin-supply = <&tps65090_dcdc1_reg>;
 		};
+
+		vdd_cam_1v8_reg: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "vdd_cam_1v8_reg";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			enable-active-high;
+			gpio = <&palmas_gpio 6 0>;
+		};
 	};
 
 	sound {
@@ -964,7 +1217,9 @@
 			"Speakers", "SPORP",
 			"Speakers", "SPORN",
 			"Speakers", "SPOLP",
-			"Speakers", "SPOLN";
+			"Speakers", "SPOLN",
+			"Mic Jack", "MICBIAS1",
+			"IN2P", "Mic Jack";
 
 		nvidia,i2s-controller = <&tegra_i2s1>;
 		nvidia,audio-codec = <&rt5640>;
diff --git a/arch/arm/boot/dts/tegra114-pluto.dts b/arch/arm/boot/dts/tegra114-pluto.dts
deleted file mode 100644
index d5f8d3e..0000000
--- a/arch/arm/boot/dts/tegra114-pluto.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-/dts-v1/;
-
-#include "tegra114.dtsi"
-
-/ {
-	model = "NVIDIA Tegra114 Pluto evaluation board";
-	compatible = "nvidia,pluto", "nvidia,tegra114";
-
-	memory {
-		reg = <0x80000000 0x40000000>;
-	};
-
-	serial@70006300 {
-		status = "okay";
-	};
-
-	pmc {
-		nvidia,invert-interrupt;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index abf6c40d..8d42787 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -318,9 +318,9 @@
 
 	iommu {
 		compatible = "nvidia,tegra114-smmu", "nvidia,tegra30-smmu";
-		reg = <0x7000f010 0x02c
-		       0x7000f1f0 0x010
-		       0x7000f228 0x074>;
+		reg = <0x70019010 0x02c
+		       0x700191f0 0x010
+		       0x70019228 0x074>;
 		nvidia,#asids = <4>;
 		dma-window = <0 0x40000000>;
 		nvidia,swgroups = <0x18659fe>;
@@ -430,6 +430,68 @@
 		status = "disable";
 	};
 
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USBD>;
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@7d000000 {
+		compatible = "nvidia,tegra30-usb-phy";
+		reg = <0x7d000000 0x4000 0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USBD>,
+			 <&tegra_car TEGRA114_CLK_PLL_U>,
+			 <&tegra_car TEGRA114_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		status = "disabled";
+	};
+
+	usb@7d008000 {
+		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d008000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USB3>;
+		nvidia,phy = <&phy3>;
+		status = "disabled";
+	};
+
+	phy3: usb-phy@7d008000 {
+		compatible = "nvidia,tegra30-usb-phy";
+		reg = <0x7d008000 0x4000 0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USB3>,
+			 <&tegra_car TEGRA114_CLK_PLL_U>,
+			 <&tegra_car TEGRA114_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		status = "disabled";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
new file mode 100644
index 0000000..431d67a
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -0,0 +1,27 @@
+/dts-v1/;
+
+#include "tegra124.dtsi"
+
+/ {
+	model = "NVIDIA Tegra124 Venice2";
+	compatible = "nvidia,venice2", "nvidia,tegra124";
+
+	memory {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	serial@70006000 {
+		status = "okay";
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
new file mode 100644
index 0000000..b741300
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -0,0 +1,149 @@
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "nvidia,tegra124";
+	interrupt-parent = <&gic>;
+
+	gic: interrupt-controller@50041000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x50041000 0x1000>,
+		      <0x50042000 0x1000>,
+		      <0x50044000 0x2000>,
+		      <0x50046000 0x2000>;
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer@60005000 {
+		compatible = "nvidia,tegra124-timer", "nvidia,tegra20-timer";
+		reg = <0x60005000 0x400>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpio: gpio@6000d000 {
+		compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio";
+		reg = <0x6000d000 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performace. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable
+	 * the APB DMA based serial driver, the comptible is
+	 * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
+	 */
+	serial@70006000 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x70006000 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x70006040 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x70006200 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x70006300 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	serial@70006400 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x70006400 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	rtc@7000e000 {
+		compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
+		reg = <0x7000e000 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmc@7000e400 {
+		compatible = "nvidia,tegra124-pmc";
+		reg = <0x7000e400 0x400>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
index 5592be6..d5c9bca 100644
--- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
@@ -363,7 +363,7 @@
 	};
 
 	pmc {
-		nvidia,suspend-mode = <2>;
+		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <5000>;
 		nvidia,cpu-pwr-off-time = <5000>;
 		nvidia,core-pwr-good-time = <3845 3845>;
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index d9f89cd..e156ab3 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -335,7 +335,7 @@
 					regulator-always-on;
 				};
 
-				ldo0 {
+				pci_clk_reg: ldo0 {
 					regulator-name = "vdd_ldo0,vddio_pex_clk";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
@@ -417,7 +417,7 @@
 
 	pmc {
 		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <2>;
+		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <5000>;
 		nvidia,cpu-pwr-off-time = <5000>;
 		nvidia,core-pwr-good-time = <3845 3845>;
@@ -425,6 +425,20 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
+	pcie-controller {
+		pex-clk-supply = <&pci_clk_reg>;
+		vdd-supply = <&pci_vdd_reg>;
+		status = "okay";
+
+		pci@1,0 {
+			status = "okay";
+		};
+
+		pci@2,0 {
+			status = "okay";
+		};
+	};
+
 	usb@c5000000 {
 		status = "okay";
 	};
@@ -643,7 +657,7 @@
 			enable-active-high;
 		};
 
-		regulator@3 {
+		pci_vdd_reg: regulator@3 {
 			compatible = "regulator-fixed";
 			reg = <3>;
 			regulator-name = "vdd_1v05";
@@ -651,8 +665,6 @@
 			regulator-max-microvolt = <1050000>;
 			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
-			/* Hack until board-harmony-pcie.c is removed */
-			status = "disabled";
 		};
 
 		regulator@4 {
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index cfd1276..8d71fc9 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -417,7 +417,7 @@
 
 	pmc {
 		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <2>;
+		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <2000>;
 		nvidia,cpu-pwr-off-time = <0>;
 		nvidia,core-pwr-good-time = <3845 3845>;
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index 40e6fb2..315aae2 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -518,7 +518,7 @@
 
 	pmc {
 		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <2>;
+		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <5000>;
 		nvidia,cpu-pwr-off-time = <5000>;
 		nvidia,core-pwr-good-time = <3845 3845>;
@@ -566,7 +566,6 @@
 
 	usb@c5000000 {
 		status = "okay";
-		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
 		dr_mode = "otg";
 	};
 
@@ -829,7 +828,7 @@
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			enable-active-high;
-			gpio = <&gpio 24 0>; /* PD0 */
+			gpio = <&gpio TEGRA_GPIO(D, 0) 0>;
 			regulator-always-on;
 			regulator-boot-on;
 		};
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index c54faae..7726dab 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -366,7 +366,7 @@
 					regulator-always-on;
 				};
 
-				ldo0 {
+				pci_clk_reg: ldo0 {
 					regulator-name = "vdd_ldo0,vddio_pex_clk";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
@@ -459,7 +459,7 @@
 
 	pmc {
 		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <2>;
+		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <5000>;
 		nvidia,cpu-pwr-off-time = <5000>;
 		nvidia,core-pwr-good-time = <3845 3845>;
@@ -467,6 +467,11 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
+	pcie-controller {
+		pex-clk-supply = <&pci_clk_reg>;
+		vdd-supply = <&pci_vdd_reg>;
+	};
+
 	usb@c5008000 {
 		status = "okay";
 	};
@@ -509,5 +514,15 @@
 			regulator-max-microvolt = <5000000>;
 			regulator-always-on;
 		};
+
+		pci_vdd_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vdd_1v05";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			gpio = <&pmic 2 0>;
+			enable-active-high;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts
index c572c43..3ada3cb 100644
--- a/arch/arm/boot/dts/tegra20-tec.dts
+++ b/arch/arm/boot/dts/tegra20-tec.dts
@@ -32,6 +32,14 @@
 		};
 	};
 
+	pcie-controller {
+		status = "okay";
+
+		pci@1,0 {
+			status = "okay";
+		};
+	};
+
 	sound {
 		compatible = "ad,tegra-audio-wm8903-tec",
 			     "nvidia,tegra-audio-wm8903";
diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
index 37c93d3..78deea5 100644
--- a/arch/arm/boot/dts/tegra20-trimslice.dts
+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
@@ -302,7 +302,7 @@
 	};
 
 	pmc {
-		nvidia,suspend-mode = <2>;
+		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <5000>;
 		nvidia,cpu-pwr-off-time = <5000>;
 		nvidia,core-pwr-good-time = <3845 3845>;
@@ -310,9 +310,18 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
+	pcie-controller {
+		status = "okay";
+		pex-clk-supply = <&pci_clk_reg>;
+		vdd-supply = <&pci_vdd_reg>;
+
+		pci@1,0 {
+			status = "okay";
+		};
+	};
+
 	usb@c5000000 {
 		status = "okay";
-		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
 	};
 
 	usb-phy@c5000000 {
@@ -411,10 +420,28 @@
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			enable-active-high;
-			gpio = <&gpio 170 0>; /* PV2 */
+			gpio = <&gpio TEGRA_GPIO(V, 2) 0>;
 			regulator-always-on;
 			regulator-boot-on;
 		};
+
+		pci_clk_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "pci_clk";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		pci_vdd_reg: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "pci_vdd";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+		};
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index 7f8c28d..aab872c 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -494,7 +494,7 @@
 
 	pmc {
 		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <2>;
+		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <2000>;
 		nvidia,cpu-pwr-off-time = <100>;
 		nvidia,core-pwr-good-time = <3845 3845>;
diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts
index a3d0eba..d33a73cf 100644
--- a/arch/arm/boot/dts/tegra20-whistler.dts
+++ b/arch/arm/boot/dts/tegra20-whistler.dts
@@ -497,7 +497,7 @@
 
 	pmc {
 		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <2>;
+		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <2000>;
 		nvidia,cpu-pwr-off-time = <1000>;
 		nvidia,core-pwr-good-time = <0 3845>;
@@ -509,7 +509,6 @@
 
 	usb@c5000000 {
 		status = "okay";
-		nvidia,vbus-gpio = <&tca6416 0 GPIO_ACTIVE_HIGH>;
 	};
 
 	usb-phy@c5000000 {
@@ -519,7 +518,6 @@
 
 	usb@c5008000 {
 		status = "okay";
-		nvidia,vbus-gpio = <&tca6416 1 GPIO_ACTIVE_HIGH>;
 	};
 
 	usb-phy@c5008000 {
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 9653fd8..df40b54 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -455,6 +455,61 @@
 		#size-cells = <0>;
 	};
 
+	pcie-controller {
+		compatible = "nvidia,tegra20-pcie";
+		device_type = "pci";
+		reg = <0x80003000 0x00000800   /* PADS registers */
+		       0x80003800 0x00000200   /* AFI registers */
+		       0x90000000 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH   /* controller interrupt */
+			      GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x82000000 0 0x80000000 0x80000000 0 0x00001000   /* port 0 registers */
+			  0x82000000 0 0x80001000 0x80001000 0 0x00001000   /* port 1 registers */
+			  0x81000000 0 0          0x82000000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0xa0000000 0xa0000000 0 0x08000000   /* non-prefetchable memory */
+			  0xc2000000 0 0xa8000000 0xa8000000 0 0x18000000>; /* prefetchable memory */
+
+		clocks = <&tegra_car TEGRA20_CLK_PEX>,
+			 <&tegra_car TEGRA20_CLK_AFI>,
+			 <&tegra_car TEGRA20_CLK_PCIE_XCLK>,
+			 <&tegra_car TEGRA20_CLK_PLL_E>;
+		clock-names = "pex", "afi", "pcie_xclk", "pll_e";
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+	};
+
 	usb@c5000000 {
 		compatible = "nvidia,tegra20-ehci", "usb-ehci";
 		reg = <0xc5000000 0x4000>;
@@ -477,13 +532,13 @@
 			 <&tegra_car TEGRA20_CLK_USBD>;
 		clock-names = "reg", "pll_u", "timer", "utmi-pads";
 		nvidia,has-legacy-mode;
-		hssync_start_delay = <9>;
-		idle_wait_delay = <17>;
-		elastic_limit = <16>;
-		term_range_adj = <6>;
-		xcvr_setup = <9>;
-		xcvr_lsfslew = <1>;
-		xcvr_lsrslew = <1>;
+		nvidia,hssync-start-delay = <9>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <1>;
+		nvidia,xcvr-lsrslew = <1>;
 		status = "disabled";
 	};
 
@@ -527,13 +582,13 @@
 			 <&tegra_car TEGRA20_CLK_CLK_M>,
 			 <&tegra_car TEGRA20_CLK_USBD>;
 		clock-names = "reg", "pll_u", "timer", "utmi-pads";
-		hssync_start_delay = <9>;
-		idle_wait_delay = <17>;
-		elastic_limit = <16>;
-		term_range_adj = <6>;
-		xcvr_setup = <9>;
-		xcvr_lsfslew = <2>;
-		xcvr_lsrslew = <2>;
+		nvidia,hssync-start-delay = <9>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
 		status = "disabled";
 	};
 
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
index 87c5f7b..08cad69 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -10,6 +10,40 @@
 		reg = <0x80000000 0x7ff00000>;
 	};
 
+	pcie-controller {
+		status = "okay";
+		pex-clk-supply = <&sys_3v3_pexs_reg>;
+		vdd-supply = <&ldo1_reg>;
+		avdd-supply = <&ldo2_reg>;
+
+		pci@1,0 {
+			status = "okay";
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@3,0 {
+			status = "okay";
+			nvidia,num-lanes = <2>;
+		};
+	};
+
+	host1x {
+		hdmi {
+			status = "okay";
+
+			vdd-supply = <&sys_3v3_reg>;
+			pll-supply = <&vio_reg>;
+
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			nvidia,ddc-i2c-bus = <&hdmiddc>;
+		};
+	};
+
 	pinmux {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -76,6 +110,11 @@
 				nvidia,pull = <0>;
 				nvidia,tristate = <0>;
 			};
+			pex_l1_prsnt_n_pdd4 {
+				nvidia,pins =	"pex_l1_prsnt_n_pdd4",
+						"pex_l1_clkreq_n_pdd6";
+				nvidia,pull = <2>;
+			};
 			sdio3 {
 				nvidia,pins = "drive_sdio3";
 				nvidia,high-speed-mode = <0>;
@@ -85,6 +124,10 @@
 				nvidia,slew-rate-rising = <1>;
 				nvidia,slew-rate-falling = <1>;
 			};
+			gpv {
+				nvidia,pins = "drive_gpv";
+				nvidia,pull-up-strength = <16>;
+			};
 		};
 	};
 
@@ -107,7 +150,7 @@
 		clock-frequency = <100000>;
 	};
 
-	i2c@7000c700 {
+	hdmiddc: i2c@7000c700 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
@@ -262,7 +305,7 @@
 	pmc {
 		status = "okay";
 		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <2>;
+		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <2000>;
 		nvidia,cpu-pwr-off-time = <200>;
 		nvidia,core-pwr-good-time = <3845 3845>;
@@ -285,6 +328,15 @@
 		non-removable;
 	};
 
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		vbus-supply = <&usb3_vbus_reg>;
+		status = "okay";
+	};
+
 	clocks {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -357,7 +409,7 @@
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>;
+			gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
 			gpio-open-drain;
 			vin-supply = <&vdd_5v_in_reg>;
 		};
@@ -369,7 +421,7 @@
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+			gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
 			gpio-open-drain;
 			vin-supply = <&vdd_5v_in_reg>;
 		};
@@ -421,7 +473,9 @@
 
 		nvidia,audio-routing =
 			"Headphones", "HPOR",
-			"Headphones", "HPOL";
+			"Headphones", "HPOL",
+			"Mic Jack", "MICBIAS1",
+			"IN2P", "Mic Jack";
 
 		nvidia,i2s-controller = <&tegra_i2s1>;
 		nvidia,audio-codec = <&rt5640>;
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index f65b53d..5ea7dfa 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -31,6 +31,26 @@
 		reg = <0x80000000 0x40000000>;
 	};
 
+	pcie-controller {
+		status = "okay";
+		pex-clk-supply = <&pex_hvdd_3v3_reg>;
+		vdd-supply = <&ldo1_reg>;
+		avdd-supply = <&ldo2_reg>;
+
+		pci@1,0 {
+			nvidia,num-lanes = <4>;
+		};
+
+		pci@2,0 {
+			nvidia,num-lanes = <1>;
+		};
+
+		pci@3,0 {
+			status = "okay";
+			nvidia,num-lanes = <1>;
+		};
+	};
+
 	pinmux {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -173,19 +193,6 @@
 			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
 		};
 
-		tps62361 {
-			compatible = "ti,tps62361";
-			reg = <0x60>;
-
-			regulator-name = "tps62361-vout";
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-boot-on;
-			regulator-always-on;
-			ti,vsel0-state-high;
-			ti,vsel1-state-high;
-		};
-
 		pmic: tps65911@2d {
 			compatible = "ti,tps65911";
 			reg = <0x2d>;
@@ -286,6 +293,27 @@
 				};
 			};
 		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&sys_3v3_reg>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		tps62361 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+		};
 	};
 
 	spi@7000da00 {
@@ -307,7 +335,7 @@
 	pmc {
 		status = "okay";
 		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <2>;
+		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <2000>;
 		nvidia,cpu-pwr-off-time = <200>;
 		nvidia,core-pwr-good-time = <3845 3845>;
@@ -330,6 +358,15 @@
 		non-removable;
 	};
 
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		vbus-supply = <&usb3_vbus_reg>;
+		status = "okay";
+	};
+
 	clocks {
 		compatible = "simple-bus";
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index d8783f0..2bd55cf 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -16,6 +16,76 @@
 		serial4 = &uarte;
 	};
 
+	pcie-controller {
+		compatible = "nvidia,tegra30-pcie";
+		device_type = "pci";
+		reg = <0x00003000 0x00000800   /* PADS registers */
+		       0x00003800 0x00000200   /* AFI registers */
+		       0x10000000 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH   /* controller interrupt */
+			      GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x82000000 0 0x00000000 0x00000000 0 0x00001000   /* port 0 configuration space */
+			  0x82000000 0 0x00001000 0x00001000 0 0x00001000   /* port 1 configuration space */
+			  0x82000000 0 0x00004000 0x00004000 0 0x00001000   /* port 2 configuration space */
+			  0x81000000 0 0          0x02000000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0x20000000 0x20000000 0 0x08000000   /* non-prefetchable memory */
+			  0xc2000000 0 0x28000000 0x28000000 0 0x18000000>; /* prefetchable memory */
+
+		clocks = <&tegra_car TEGRA30_CLK_PCIE>,
+			 <&tegra_car TEGRA30_CLK_AFI>,
+			 <&tegra_car TEGRA30_CLK_PCIEX>,
+			 <&tegra_car TEGRA30_CLK_PLL_E>,
+			 <&tegra_car TEGRA30_CLK_CML0>;
+		clock-names = "pex", "afi", "pcie_xclk", "pll_e", "cml";
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x00000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x00001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@3,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001800 0 0x00004000 0 0x1000>;
+			reg = <0x001800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+	};
+
 	host1x {
 		compatible = "nvidia,tegra30-host1x", "simple-bus";
 		reg = <0x50000000 0x00024000>;
@@ -66,12 +136,13 @@
 		gr3d {
 			compatible = "nvidia,tegra30-gr3d";
 			reg = <0x54180000 0x00040000>;
-			clocks = <&tegra_car 24 &tegra_car 98>;
+			clocks = <&tegra_car TEGRA30_CLK_GR3D
+				  &tegra_car TEGRA30_CLK_GR3D2>;
 			clock-names = "3d", "3d2";
 		};
 
 		dc@54200000 {
-			compatible = "nvidia,tegra30-dc";
+			compatible = "nvidia,tegra30-dc", "nvidia,tegra20-dc";
 			reg = <0x54200000 0x00040000>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA30_CLK_DISP1>,
@@ -561,6 +632,92 @@
 		status = "disabled";
 	};
 
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USBD>;
+		nvidia,needs-double-reset;
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@7d000000 {
+		compatible = "nvidia,tegra30-usb-phy";
+		reg = <0x7d000000 0x4000 0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USBD>,
+			 <&tegra_car TEGRA30_CLK_PLL_U>,
+			 <&tegra_car TEGRA30_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		nvidia,hssync-start-delay = <9>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <51>;
+		nvidia.xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <1>;
+		nvidia,xcvr-lsrslew = <1>;
+		nvidia,xcvr-hsslew = <32>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		status = "disabled";
+	};
+
+	usb@7d004000 {
+		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d004000 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "ulpi";
+		clocks = <&tegra_car TEGRA30_CLK_USB2>;
+		nvidia,phy = <&phy2>;
+		status = "disabled";
+	};
+
+	phy2: usb-phy@7d004000 {
+		compatible = "nvidia,tegra30-usb-phy";
+		reg = <0x7d004000 0x4000>;
+		phy_type = "ulpi";
+		clocks = <&tegra_car TEGRA30_CLK_USB2>,
+			 <&tegra_car TEGRA30_CLK_PLL_U>,
+			 <&tegra_car TEGRA30_CLK_CDEV2>;
+		clock-names = "reg", "pll_u", "ulpi-link";
+		status = "disabled";
+	};
+
+	usb@7d008000 {
+		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d008000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USB3>;
+		nvidia,phy = <&phy3>;
+		status = "disabled";
+	};
+
+	phy3: usb-phy@7d008000 {
+		compatible = "nvidia,tegra30-usb-phy";
+		reg = <0x7d008000 0x4000 0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USB3>,
+			 <&tegra_car TEGRA30_CLK_PLL_U>,
+			 <&tegra_car TEGRA30_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <51>;
+		nvidia.xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		nvidia,xcvr-hsslew = <32>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		status = "disabled";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index ae6a17a..fb1b2ec 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -23,6 +23,22 @@
 		compatible = "ti,twl4030-wdt";
 	};
 
+	vaux1: regulator-vaux1 {
+		compatible = "ti,twl4030-vaux1";
+	};
+
+	vaux2: regulator-vaux2 {
+		compatible = "ti,twl4030-vaux2";
+	};
+
+	vaux3: regulator-vaux3 {
+		compatible = "ti,twl4030-vaux3";
+	};
+
+	vaux4: regulator-vaux4 {
+		compatible = "ti,twl4030-vaux4";
+	};
+
 	vcc: regulator-vdd1 {
 		compatible = "ti,twl4030-vdd1";
 		regulator-min-microvolt = <600000>;
@@ -35,10 +51,20 @@
 		regulator-max-microvolt = <1800000>;
 	};
 
-	vpll2: regulator-vpll2 {
-		compatible = "ti,twl4030-vpll2";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
+	vio: regulator-vio {
+		compatible = "ti,twl4030-vio";
+	};
+
+	vintana1: regulator-vintana1 {
+		compatible = "ti,twl4030-vintana1";
+	};
+
+	vintana2: regulator-vintana2 {
+		compatible = "ti,twl4030-vintana2";
+	};
+
+	vintdig: regulator-vintdig {
+		compatible = "ti,twl4030-vintdig";
 	};
 
 	vmmc1: regulator-vmmc1 {
@@ -65,6 +91,16 @@
 		compatible = "ti,twl4030-vusb3v1";
 	};
 
+	vpll1: regulator-vpll1 {
+		compatible = "ti,twl4030-vpll1";
+	};
+
+	vpll2: regulator-vpll2 {
+		compatible = "ti,twl4030-vpll2";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	vsim: regulator-vsim {
 		compatible = "ti,twl4030-vsim";
 		regulator-min-microvolt = <1800000>;
@@ -86,6 +122,7 @@
 		usb1v8-supply = <&vusb1v8>;
 		usb3v1-supply = <&vusb3v1>;
 		usb_mode = <1>;
+		#phy-cells = <0>;
 	};
 
 	twl_pwm: pwm {
@@ -97,4 +134,9 @@
 		compatible = "ti,twl4030-pwmled";
 		#pwm-cells = <2>;
 	};
+
+	twl_pwrbutton: pwrbutton {
+		compatible = "ti,twl4030-pwrbutton";
+		interrupts = <8>;
+	};
 };
diff --git a/arch/arm/boot/dts/twl6030_omap4.dtsi b/arch/arm/boot/dts/twl6030_omap4.dtsi
new file mode 100644
index 0000000..a4fa570
--- /dev/null
+++ b/arch/arm/boot/dts/twl6030_omap4.dtsi
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&twl {
+	/*
+	 * On most OMAP4 platforms, the twl6030 IRQ line is connected
+	 * to the SYS_NIRQ1 line on OMAP and the twl6030 MSECURE line is
+	 * connected to the fref_clk0_out.sys_drm_msecure line.
+	 * Therefore, configure the defaults for the SYS_NIRQ1 and
+	 * fref_clk0_out.sys_drm_msecure pins here.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&twl6030_pins
+		&twl6030_wkup_pins
+	>;
+};
+
+&omap4_pmx_wkup {
+	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
+		pinctrl-single,pins = <
+			0x14 (PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
+		>;
+	};
+};
+
+&omap4_pmx_core {
+	twl6030_pins: pinmux_twl6030_pins {
+		pinctrl-single,pins = <
+			0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index d2803be..15f98cb 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -37,30 +37,35 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0>;
+			cci-control-port = <&cci_control1>;
 		};
 
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <1>;
+			cci-control-port = <&cci_control1>;
 		};
 
 		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x100>;
+			cci-control-port = <&cci_control2>;
 		};
 
 		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x101>;
+			cci-control-port = <&cci_control2>;
 		};
 
 		cpu4: cpu@4 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x102>;
+			cci-control-port = <&cci_control2>;
 		};
 	};
 
@@ -104,6 +109,26 @@
 		interrupts = <1 9 0xf04>;
 	};
 
+	cci@2c090000 {
+		compatible = "arm,cci-400";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0 0x2c090000 0 0x1000>;
+		ranges = <0x0 0x0 0x2c090000 0x10000>;
+
+		cci_control1: slave-if@4000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x4000 0x1000>;
+		};
+
+		cci_control2: slave-if@5000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x5000 0x1000>;
+		};
+	};
+
 	memory-controller@7ffd0000 {
 		compatible = "arm,pl354", "arm,primecell";
 		reg = <0 0x7ffd0000 0 0x1000>;
@@ -125,6 +150,12 @@
 		clock-names = "apb_pclk";
 	};
 
+        scc@7fff0000 {
+		compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc";
+		reg = <0 0x7fff0000 0 0x1000>;
+		interrupts = <0 95 4>;
+        };
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <1 13 0xf08>,
diff --git a/arch/arm/boot/dts/vf610-cosmic.dts b/arch/arm/boot/dts/vf610-cosmic.dts
new file mode 100644
index 0000000..c42e4f9
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-cosmic.dts
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2013 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "PHYTEC Cosmic/Cosmic+ Board";
+	compatible = "phytec,vf610-cosmic", "fsl,vf610";
+
+	chosen {
+		bootargs = "console=ttyLP1,115200";
+	};
+
+	memory {
+		reg = <0x80000000 0x10000000>;
+	};
+
+	clocks {
+		enet_ext {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1_1>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index b3905f5..c8047ca 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -36,6 +36,23 @@
 
 };
 
+&dspi0 {
+	bus-num = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi0_1>;
+	status = "okay";
+
+	sflash: at26df081a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at26df081a";
+		spi-max-frequency = <16000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
 &fec0 {
 	phy-mode = "rmii";
 	pinctrl-names = "default";
@@ -50,6 +67,13 @@
 	status = "okay";
 };
 
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0_1>;
+	status = "okay";
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1_1>;
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index 67d929c..d31ce1b 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -123,6 +123,18 @@
 				status = "disabled";
 			};
 
+			dspi0: dspi0@4002c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-dspi";
+				reg = <0x4002c000 0x1000>;
+				interrupts = <0 67 0x04>;
+				clocks = <&clks VF610_CLK_DSPI0>;
+				clock-names = "dspi";
+				spi-num-chipselects = <5>;
+				status = "disabled";
+			};
+
 			sai2: sai@40031000 {
 				compatible = "fsl,vf610-sai";
 				reg = <0x40031000 0x1000>;
diff --git a/arch/arm/boot/dts/wm8850-w70v2.dts b/arch/arm/boot/dts/wm8850-w70v2.dts
index 90e913f..7a563d2 100644
--- a/arch/arm/boot/dts/wm8850-w70v2.dts
+++ b/arch/arm/boot/dts/wm8850-w70v2.dts
@@ -11,13 +11,14 @@
 
 /dts-v1/;
 /include/ "wm8850.dtsi"
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "Wondermedia WM8850-W70v2 Tablet";
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm 0 50000 1>;	/* duty inverted */
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
 
 		brightness-levels = <0 40 60 80 100 130 190 255>;
 		default-brightness-level = <5>;
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 6f54a64..e32b92b 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -41,8 +41,8 @@
 		L2: cache-controller {
 			compatible = "arm,pl310-cache";
 			reg = <0xF8F02000 0x1000>;
-			arm,data-latency = <2 3 2>;
-			arm,tag-latency = <2 3 2>;
+			arm,data-latency = <3 2 2>;
+			arm,tag-latency = <2 2 2>;
 			cache-unified;
 			cache-level = <2>;
 		};
diff --git a/arch/arm/boot/install.sh b/arch/arm/boot/install.sh
index 06ea7d4..2a45092 100644
--- a/arch/arm/boot/install.sh
+++ b/arch/arm/boot/install.sh
@@ -20,6 +20,20 @@
 #   $4 - default install path (blank if root directory)
 #
 
+verify () {
+	if [ ! -f "$1" ]; then
+		echo ""                                                   1>&2
+		echo " *** Missing file: $1"                              1>&2
+		echo ' *** You need to run "make" before "make install".' 1>&2
+		echo ""                                                   1>&2
+		exit 1
+	fi
+}
+
+# Make sure the files actually exist
+verify "$2"
+verify "$3"
+
 # User may have a custom install script
 if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
 if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 8c60f47..eaa9cf4 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -6,7 +6,6 @@ obj-y				+= firmware.o
 
 obj-$(CONFIG_ICST)		+= icst.o
 obj-$(CONFIG_SA1111)		+= sa1111.o
-obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
 obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
 obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o
 obj-$(CONFIG_SHARP_PARAM)	+= sharpsl_param.o
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index 39ad030..8e1a024 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -269,6 +269,11 @@ static const struct edmacc_param dummy_paramset = {
 	.ccnt = 1,
 };
 
+static const struct of_device_id edma_of_ids[] = {
+	{ .compatible = "ti,edma3", },
+	{}
+};
+
 /*****************************************************************************/
 
 static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
@@ -560,14 +565,38 @@ static int reserve_contiguous_slots(int ctlr, unsigned int id,
 static int prepare_unused_channel_list(struct device *dev, void *data)
 {
 	struct platform_device *pdev = to_platform_device(dev);
-	int i, ctlr;
+	int i, count, ctlr;
+	struct of_phandle_args  dma_spec;
+
+	if (dev->of_node) {
+		count = of_property_count_strings(dev->of_node, "dma-names");
+		if (count < 0)
+			return 0;
+		for (i = 0; i < count; i++) {
+			if (of_parse_phandle_with_args(dev->of_node, "dmas",
+						       "#dma-cells", i,
+						       &dma_spec))
+				continue;
+
+			if (!of_match_node(edma_of_ids, dma_spec.np)) {
+				of_node_put(dma_spec.np);
+				continue;
+			}
 
+			clear_bit(EDMA_CHAN_SLOT(dma_spec.args[0]),
+				  edma_cc[0]->edma_unused);
+			of_node_put(dma_spec.np);
+		}
+		return 0;
+	}
+
+	/* For non-OF case */
 	for (i = 0; i < pdev->num_resources; i++) {
 		if ((pdev->resource[i].flags & IORESOURCE_DMA) &&
 				(int)pdev->resource[i].start >= 0) {
 			ctlr = EDMA_CTLR(pdev->resource[i].start);
 			clear_bit(EDMA_CHAN_SLOT(pdev->resource[i].start),
-					edma_cc[ctlr]->edma_unused);
+				  edma_cc[ctlr]->edma_unused);
 		}
 	}
 
@@ -1235,6 +1264,23 @@ void edma_resume(unsigned channel)
 }
 EXPORT_SYMBOL(edma_resume);
 
+int edma_trigger_channel(unsigned channel)
+{
+	unsigned ctlr;
+	unsigned int mask;
+
+	ctlr = EDMA_CTLR(channel);
+	channel = EDMA_CHAN_SLOT(channel);
+	mask = BIT(channel & 0x1f);
+
+	edma_shadow0_write_array(ctlr, SH_ESR, (channel >> 5), mask);
+
+	pr_debug("EDMA: ESR%d %08x\n", (channel >> 5),
+		 edma_shadow0_read_array(ctlr, SH_ESR, (channel >> 5)));
+	return 0;
+}
+EXPORT_SYMBOL(edma_trigger_channel);
+
 /**
  * edma_start - start dma on a channel
  * @channel: channel being activated
@@ -1745,11 +1791,6 @@ static int edma_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id edma_of_ids[] = {
-	{ .compatible = "ti,edma3", },
-	{}
-};
-
 static struct platform_driver edma_driver = {
 	.driver = {
 		.name	= "edma",
diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c
index 370236d..9902509 100644
--- a/arch/arm/common/mcpm_entry.c
+++ b/arch/arm/common/mcpm_entry.c
@@ -51,7 +51,8 @@ void mcpm_cpu_power_down(void)
 {
 	phys_reset_t phys_reset;
 
-	BUG_ON(!platform_ops);
+	if (WARN_ON_ONCE(!platform_ops || !platform_ops->power_down))
+		return;
 	BUG_ON(!irqs_disabled());
 
 	/*
@@ -93,7 +94,8 @@ void mcpm_cpu_suspend(u64 expected_residency)
 {
 	phys_reset_t phys_reset;
 
-	BUG_ON(!platform_ops);
+	if (WARN_ON_ONCE(!platform_ops || !platform_ops->suspend))
+		return;
 	BUG_ON(!irqs_disabled());
 
 	/* Very similar to mcpm_cpu_power_down() */
diff --git a/arch/arm/common/mcpm_head.S b/arch/arm/common/mcpm_head.S
index 80f033614..39c96df 100644
--- a/arch/arm/common/mcpm_head.S
+++ b/arch/arm/common/mcpm_head.S
@@ -151,7 +151,7 @@ mcpm_setup_leave:
 
 	mov	r0, #INBOUND_NOT_COMING_UP
 	strb	r0, [r8, #MCPM_SYNC_CLUSTER_INBOUND]
-	dsb
+	dsb	st
 	sev
 
 	mov	r0, r11
diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c
index d56c932..025f6ce 100644
--- a/arch/arm/common/sharpsl_param.c
+++ b/arch/arm/common/sharpsl_param.c
@@ -15,6 +15,7 @@
 #include <linux/module.h>
 #include <linux/string.h>
 #include <asm/mach/sharpsl_param.h>
+#include <asm/memory.h>
 
 /*
  * Certain hardware parameters determined at the time of device manufacture,
@@ -25,8 +26,10 @@
  */
 #ifdef CONFIG_ARCH_SA1100
 #define PARAM_BASE	0xe8ffc000
+#define param_start(x)	(void *)(x)
 #else
 #define PARAM_BASE	0xa0000a00
+#define param_start(x)	__va(x)
 #endif
 #define MAGIC_CHG(a,b,c,d) ( ( d << 24 ) | ( c << 16 )  | ( b << 8 ) | a )
 
@@ -41,7 +44,7 @@ EXPORT_SYMBOL(sharpsl_param);
 
 void sharpsl_save_param(void)
 {
-	memcpy(&sharpsl_param, (void *)PARAM_BASE, sizeof(struct sharpsl_param_info));
+	memcpy(&sharpsl_param, param_start(PARAM_BASE), sizeof(struct sharpsl_param_info));
 
 	if (sharpsl_param.comadj_keyword != COMADJ_MAGIC)
 		sharpsl_param.comadj=-1;
diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c
index 023ee63..e901d0f 100644
--- a/arch/arm/common/timer-sp.c
+++ b/arch/arm/common/timer-sp.c
@@ -166,7 +166,8 @@ static int sp804_set_next_event(unsigned long next,
 }
 
 static struct clock_event_device sp804_clockevent = {
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
+		CLOCK_EVT_FEAT_DYNIRQ,
 	.set_mode	= sp804_set_mode,
 	.set_next_event	= sp804_set_next_event,
 	.rating		= 300,
diff --git a/arch/arm/common/via82c505.c b/arch/arm/common/via82c505.c
deleted file mode 100644
index 6cb362e5..0000000
--- a/arch/arm/common/via82c505.c
+++ /dev/null
@@ -1,83 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-
-
-#include <asm/mach/pci.h>
-
-#define MAX_SLOTS		7
-
-#define CONFIG_CMD(bus, devfn, where)   (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
-
-static int
-via82c505_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		      int size, u32 *value)
-{
-	outl(CONFIG_CMD(bus,devfn,where),0xCF8);
-	switch (size) {
-	case 1:
-		*value=inb(0xCFC + (where&3));
-		break;
-	case 2:
-		*value=inw(0xCFC + (where&2));
-		break;
-	case 4:
-		*value=inl(0xCFC);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-via82c505_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		       int size, u32 value)
-{
-	outl(CONFIG_CMD(bus,devfn,where),0xCF8);
-	switch (size) {
-	case 1:
-		outb(value, 0xCFC + (where&3));
-		break;
-	case 2:
-		outw(value, 0xCFC + (where&2));
-		break;
-	case 4:
-		outl(value, 0xCFC);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops via82c505_ops = {
-	.read	= via82c505_read_config,
-	.write	= via82c505_write_config,
-};
-
-void __init via82c505_preinit(void)
-{
-	printk(KERN_DEBUG "PCI: VIA 82c505\n");
-	if (!request_region(0xA8,2,"via config")) {
-		printk(KERN_WARNING"VIA 82c505: Unable to request region 0xA8\n");
-		return;
-	}
-	if (!request_region(0xCF8,8,"pci config")) {
-		printk(KERN_WARNING"VIA 82c505: Unable to request region 0xCF8\n");
-		release_region(0xA8, 2);
-		return;
-	}
-
-	/* Enable compatible Mode */
-	outb(0x96,0xA8);
-	outb(0x18,0xA9);
-	outb(0x93,0xA8);
-	outb(0xd0,0xA9);
-
-}
-
-int __init via82c505_setup(int nr, struct pci_sys_data *sys)
-{
-	return (nr == 0);
-}
diff --git a/arch/arm/common/vlock.S b/arch/arm/common/vlock.S
index ff19858..8b7df28 100644
--- a/arch/arm/common/vlock.S
+++ b/arch/arm/common/vlock.S
@@ -42,7 +42,7 @@
 	dmb
 	mov	\rscratch, #0
 	strb	\rscratch, [\rbase, \rcpu]
-	dsb
+	dsb	st
 	sev
 .endm
 
@@ -102,7 +102,7 @@ ENTRY(vlock_unlock)
 	dmb
 	mov	r1, #VLOCK_OWNER_NONE
 	strb	r1, [r0, #VLOCK_OWNER_OFFSET]
-	dsb
+	dsb	st
 	sev
 	bx	lr
 ENDPROC(vlock_unlock)
diff --git a/arch/arm/configs/ag5evm_defconfig b/arch/arm/configs/ag5evm_defconfig
deleted file mode 100644
index 212ead3..0000000
--- a/arch/arm/configs/ag5evm_defconfig
+++ /dev/null
@@ -1,83 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
-CONFIG_ARCH_SH73A0=y
-CONFIG_MACH_AG5EVM=y
-CONFIG_MEMORY_SIZE=0x10000000
-CONFIG_CPU_BPREDICT_DISABLE=y
-CONFIG_ARM_ERRATA_430973=y
-CONFIG_ARM_ERRATA_458693=y
-CONFIG_NO_HZ=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty0 console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel"
-CONFIG_CMDLINE_FORCE=y
-CONFIG_KEXEC=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM=y
-# CONFIG_SUSPEND is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_BLK_DEV is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-CONFIG_INPUT_SPARSEKMAP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=9
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_SH_MOBILE=y
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_FTRACE is not set
diff --git a/arch/arm/configs/ape6evm_defconfig b/arch/arm/configs/ape6evm_defconfig
index dab5a7d..1ce3994 100644
--- a/arch/arm/configs/ape6evm_defconfig
+++ b/arch/arm/configs/ape6evm_defconfig
@@ -54,7 +54,8 @@ CONFIG_NETDEVICES=y
 CONFIG_SMC91X=y
 CONFIG_SMSC911X=y
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
 CONFIG_SERIAL_NONSTANDARD=y
@@ -71,6 +72,9 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
 # CONFIG_HID is not set
 # CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
 # CONFIG_IOMMU_SUPPORT is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_TMPFS=y
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 75fd842..690e892 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -14,11 +14,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_AT91=y
+CONFIG_SOC_AT91RM9200=y
 CONFIG_SOC_AT91SAM9260=y
 CONFIG_SOC_AT91SAM9263=y
 CONFIG_SOC_AT91SAM9G45=y
 CONFIG_SOC_AT91SAM9X5=y
 CONFIG_SOC_AT91SAM9N12=y
+CONFIG_MACH_AT91RM9200_DT=y
 CONFIG_MACH_AT91SAM9_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 CONFIG_AT91_TIMER_HZ=128
@@ -62,6 +64,7 @@ CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_UBI=y
@@ -78,7 +81,6 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
-CONFIG_MII=y
 CONFIG_MACB=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_FARADAY is not set
diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig
index 65edf6d..287ac1d 100644
--- a/arch/arm/configs/bcm_defconfig
+++ b/arch/arm/configs/bcm_defconfig
@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
@@ -25,10 +24,9 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
-CONFIG_EFI_PARTITION=y
 CONFIG_ARCH_BCM=y
+CONFIG_ARCH_BCM_MOBILE=y
 CONFIG_ARM_THUMBEE=y
-CONFIG_ARM_ERRATA_743622=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
@@ -42,6 +40,17 @@ CONFIG_VFP=y
 CONFIG_NEON=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_PM_RUNTIME=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_SYN_COOKIES=y
+CONFIG_TCP_MD5SIG=y
+CONFIG_IPV6=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_PROC_DEVICETREE=y
@@ -83,7 +92,6 @@ CONFIG_MMC_UNSAFE_RESUME=y
 CONFIG_MMC_BLOCK_MINORS=32
 CONFIG_MMC_TEST=y
 CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_BCM_KONA=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
@@ -105,14 +113,13 @@ CONFIG_CONFIGFS_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=110
 CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
-CONFIG_DEBUG_INFO=y
 # CONFIG_FTRACE is not set
-CONFIG_DEBUG_LL=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig
index 845f5cd..b38cd10 100644
--- a/arch/arm/configs/bockw_defconfig
+++ b/arch/arm/configs/bockw_defconfig
@@ -82,8 +82,19 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_HWMON is not set
 CONFIG_I2C=y
 CONFIG_I2C_RCAR=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=y
+CONFIG_VIDEO_RCAR_VIN=y
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+CONFIG_VIDEO_ML86V7667=y
 CONFIG_SPI=y
 CONFIG_SPI_SH_HSPI=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_RCAR=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig
index 4364eff..1101054 100644
--- a/arch/arm/configs/dove_defconfig
+++ b/arch/arm/configs/dove_defconfig
@@ -13,6 +13,9 @@ CONFIG_ARCH_DOVE=y
 CONFIG_MACH_DOVE_DB=y
 CONFIG_MACH_CM_A510=y
 CONFIG_MACH_DOVE_DT=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MVEBU=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
@@ -78,6 +81,7 @@ CONFIG_SPI_ORION=y
 CONFIG_THERMAL=y
 CONFIG_DOVE_THERMAL=y
 CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_STORAGE=y
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 806005a..6ac5ea7 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -1,15 +1,14 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_EP93XX=y
 CONFIG_CRUNCH=y
@@ -47,11 +46,8 @@ CONFIG_IPV6=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
@@ -67,15 +63,14 @@ CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_EP93XX_ETH=y
 CONFIG_USB_RTL8150=y
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_AMBA_PL010=y
 CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -86,9 +81,9 @@ CONFIG_WATCHDOG=y
 CONFIG_EP93XX_WATCHDOG=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DYNAMIC_MINORS=y
 CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
@@ -100,24 +95,18 @@ CONFIG_RTC_DRV_EP93XX=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SLAB=y
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig
deleted file mode 100644
index bffe68e..0000000
--- a/arch/arm/configs/exynos4_defconfig
+++ /dev/null
@@ -1,68 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_EXYNOS=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_MACH_SMDKC210=y
-CONFIG_MACH_ARMLEX4210=y
-CONFIG_MACH_UNIVERSAL_C210=y
-CONFIG_MACH_NURI=y
-CONFIG_MACH_ORIGEN=y
-CONFIG_MACH_SMDK4412=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index f07a847..e958ebe 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -17,16 +16,18 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_MXC=y
 CONFIG_ARCH_MULTI_V4T=y
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_MXC=y
+CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_ARCH_MX1ADS=y
 CONFIG_MACH_SCB9328=y
 CONFIG_MACH_APF9328=y
 CONFIG_MACH_MX21ADS=y
 CONFIG_MACH_MX25_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX25SD=y
+CONFIG_MACH_IMX25_DT=y
 CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_PCM038=y
 CONFIG_MACH_CPUIMX27=y
@@ -39,8 +40,6 @@ CONFIG_MACH_PCA100=y
 CONFIG_MACH_MXT_TD60=y
 CONFIG_MACH_IMX27IPCAM=y
 CONFIG_MACH_IMX27_DT=y
-CONFIG_MXC_IRQ_PRIOR=y
-CONFIG_MXC_PWM=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
@@ -67,7 +66,6 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
@@ -123,24 +121,20 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_MC13783=y
 CONFIG_REGULATOR_MC13892=y
 CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_SOC_CAMERA=y
-CONFIG_SOC_CAMERA_OV2640=y
 CONFIG_VIDEO_MX2=y
 CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_CODA=y
+CONFIG_SOC_CAMERA_OV2640=y
 CONFIG_FB=y
 CONFIG_FB_IMX=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_L4F00242T03=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
 CONFIG_SND=y
@@ -157,7 +151,6 @@ CONFIG_USB_HID=m
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MXC=y
-CONFIG_USB_ULPI=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
@@ -198,3 +191,5 @@ CONFIG_NLS_CODEPAGE_850=m
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 06686e7..8d0c5a0 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_KERNEL_LZO=y
 CONFIG_SYSVIPC=y
@@ -17,10 +16,8 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MXC=y
 CONFIG_ARCH_MULTI_V6=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_MACH_IMX31_DT=y
+CONFIG_ARCH_MXC=y
 CONFIG_MACH_MX31LILLY=y
 CONFIG_MACH_MX31LITE=y
 CONFIG_MACH_PCM037=y
@@ -30,6 +27,7 @@ CONFIG_MACH_MX31MOBOARD=y
 CONFIG_MACH_QONG=y
 CONFIG_MACH_ARMADILLO5X0=y
 CONFIG_MACH_KZM_ARM11_01=y
+CONFIG_MACH_IMX31_DT=y
 CONFIG_MACH_PCM043=y
 CONFIG_MACH_MX35_3DS=y
 CONFIG_MACH_VPR200=y
@@ -39,7 +37,6 @@ CONFIG_SOC_IMX53=y
 CONFIG_SOC_IMX6Q=y
 CONFIG_SOC_IMX6SL=y
 CONFIG_SOC_VF610=y
-CONFIG_MXC_PWM=y
 CONFIG_SMP=y
 CONFIG_VMSPLIT_2G=y
 CONFIG_PREEMPT_VOLUNTARY=y
@@ -64,20 +61,24 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_LRO is not set
 CONFIG_IPV6=y
 CONFIG_NETFILTER=y
-# CONFIG_WIRELESS is not set
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_RFKILL=y
+CONFIG_RFKILL_INPUT=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
+CONFIG_IMX_WEIM=y
 CONFIG_CONNECTOR=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_SST25L=y
@@ -88,6 +89,7 @@ CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_SRAM=y
 CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_AT25=y
 # CONFIG_SCSI_PROC_FS is not set
@@ -98,10 +100,11 @@ CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_AHCI_IMX=y
 CONFIG_PATA_IMX=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
 CONFIG_CS89x0=y
 CONFIG_CS89x0_PLATFORM=y
 # CONFIG_NET_VENDOR_FARADAY is not set
@@ -115,7 +118,7 @@ CONFIG_SMC91X=y
 CONFIG_SMC911X=y
 CONFIG_SMSC911X=y
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_WLAN is not set
+CONFIG_BRCMFMAC=m
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=m
@@ -124,22 +127,22 @@ CONFIG_KEYBOARD_IMX=y
 CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_EGALAX=y
 CONFIG_TOUCHSCREEN_MC13783=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_MMA8450=y
 CONFIG_SERIO_SERPORT=m
-CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_FSL_LPUART=y
+CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_MXC_RNGA=y
-CONFIG_I2C=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_I2C_ALGOBIT=m
 CONFIG_I2C_ALGOPCF=m
 CONFIG_I2C_ALGOPCA=m
 CONFIG_I2C_IMX=y
@@ -155,30 +158,26 @@ CONFIG_MFD_MC13XXX_SPI=y
 CONFIG_MFD_MC13XXX_I2C=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_DA9052=y
 CONFIG_REGULATOR_ANATOP=y
+CONFIG_REGULATOR_DA9052=y
 CONFIG_REGULATOR_MC13783=y
 CONFIG_REGULATOR_MC13892=y
 CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_SOC_CAMERA=y
+CONFIG_VIDEO_MX3=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_CODA=y
 CONFIG_SOC_CAMERA_OV2640=y
 CONFIG_DRM=y
-CONFIG_VIDEO_MX3=y
-CONFIG_FB=y
-CONFIG_LCD_PLATFORM=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_L4F00242T03=y
+CONFIG_LCD_PLATFORM=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
 CONFIG_SND=y
@@ -188,21 +187,33 @@ CONFIG_SND_SOC_PHYCORE_AC97=y
 CONFIG_SND_SOC_EUKREA_TLV320=y
 CONFIG_SND_SOC_IMX_WM8962=y
 CONFIG_SND_SOC_IMX_SGTL5000=y
+CONFIG_SND_SOC_IMX_SPDIF=y
 CONFIG_SND_SOC_IMX_MC13783=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_STORAGE=y
 CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_PHY=y
+CONFIG_NOP_USB_XCEIV=y
 CONFIG_USB_MXS_PHY=y
-CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 CONFIG_RTC_DRV_MC13XXX=y
@@ -213,9 +224,10 @@ CONFIG_IMX_SDMA=y
 CONFIG_MXS_DMA=y
 CONFIG_STAGING=y
 CONFIG_DRM_IMX=y
-CONFIG_DRM_IMX_TVE=y
 CONFIG_DRM_IMX_FB_HELPER=y
 CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
+CONFIG_DRM_IMX_TVE=y
+CONFIG_DRM_IMX_LDB=y
 CONFIG_DRM_IMX_IPUV3_CORE=y
 CONFIG_DRM_IMX_IPUV3=y
 CONFIG_COMMON_CLK_DEBUG=y
@@ -244,7 +256,6 @@ CONFIG_UDF_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=m
 CONFIG_JFFS2_FS=y
 CONFIG_UBIFS_FS=y
 CONFIG_NFS_FS=y
@@ -259,6 +270,7 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_SCHED_DEBUG is not set
+CONFIG_PROVE_LOCKING=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_FTRACE is not set
 # CONFIG_ARM_UNWIND is not set
@@ -269,3 +281,6 @@ CONFIG_CRC_CCITT=m
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC7=m
 CONFIG_LIBCRC32C=m
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig
index a8314c3..5bae195 100644
--- a/arch/arm/configs/integrator_defconfig
+++ b/arch/arm/configs/integrator_defconfig
@@ -1,15 +1,17 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
-CONFIG_TINY_RCU=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_INTEGRATOR=y
 CONFIG_ARCH_INTEGRATOR_AP=y
 CONFIG_ARCH_INTEGRATOR_CP=y
+CONFIG_INTEGRATOR_IMPD1=y
 CONFIG_CPU_ARM720T=y
 CONFIG_CPU_ARM920T=y
 CONFIG_CPU_ARM922T=y
@@ -18,12 +20,9 @@ CONFIG_CPU_ARM1020=y
 CONFIG_CPU_ARM1022=y
 CONFIG_CPU_ARM1026=y
 CONFIG_PCI=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
+# CONFIG_ATAGS is not set
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyAM0,38400n8 root=/dev/nfs ip=bootp"
@@ -44,24 +43,20 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_AFS_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_PHYSMAP=y
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
 CONFIG_E100=y
 CONFIG_SMC91X=y
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_AMBA_PL010=y
-CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
 CONFIG_FB=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_ARMCLCD=y
@@ -71,19 +66,23 @@ CONFIG_FB_MATROX_MYSTIQUE=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PL030=y
+CONFIG_COMMON_CLK_DEBUG=y
 CONFIG_EXT2_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig
index 62e968c..9943e5d 100644
--- a/arch/arm/configs/keystone_defconfig
+++ b/arch/arm/configs/keystone_defconfig
@@ -104,6 +104,7 @@ CONFIG_IP_SCTP=y
 CONFIG_VLAN_8021Q=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_CMA=y
+CONFIG_DMA_CMA=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -122,7 +123,9 @@ CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_I2C=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DAVINCI=y
 CONFIG_SPI=y
+CONFIG_SPI_DAVINCI=y
 CONFIG_SPI_SPIDEV=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 0f2aa61..0ae0eaeb 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -10,49 +10,18 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_KIRKWOOD=y
 CONFIG_MACH_D2NET_V2=y
-CONFIG_MACH_DB88F6281_BP=y
-CONFIG_MACH_DOCKSTAR=y
-CONFIG_MACH_ESATA_SHEEVAPLUG=y
-CONFIG_MACH_GURUPLUG=y
-CONFIG_MACH_INETSPACE_V2=y
-CONFIG_MACH_MV88F6281GTW_GE=y
 CONFIG_MACH_NET2BIG_V2=y
 CONFIG_MACH_NET5BIG_V2=y
-CONFIG_MACH_NETSPACE_MAX_V2=y
-CONFIG_MACH_NETSPACE_V2=y
 CONFIG_MACH_OPENRD_BASE=y
 CONFIG_MACH_OPENRD_CLIENT=y
 CONFIG_MACH_OPENRD_ULTIMATE=y
 CONFIG_MACH_RD88F6192_NAS=y
 CONFIG_MACH_RD88F6281=y
-CONFIG_MACH_SHEEVAPLUG=y
 CONFIG_MACH_T5325=y
 CONFIG_MACH_TS219=y
 CONFIG_MACH_TS41X=y
-CONFIG_MACH_CLOUDBOX_DT=y
-CONFIG_MACH_DB88F628X_BP_DT=y
-CONFIG_MACH_DLINK_KIRKWOOD_DT=y
-CONFIG_MACH_DOCKSTAR_DT=y
-CONFIG_MACH_DREAMPLUG_DT=y
-CONFIG_MACH_GOFLEXNET_DT=y
-CONFIG_MACH_GURUPLUG_DT=y
-CONFIG_MACH_IB62X0_DT=y
-CONFIG_MACH_ICONNECT_DT=y
-CONFIG_MACH_INETSPACE_V2_DT=y
-CONFIG_MACH_IOMEGA_IX2_200_DT=y
-CONFIG_MACH_KM_KIRKWOOD_DT=y
-CONFIG_MACH_LSXL_DT=y
-CONFIG_MACH_MPLCEC4_DT=y
-CONFIG_MACH_NETSPACE_LITE_V2_DT=y
-CONFIG_MACH_NETSPACE_MAX_V2_DT=y
-CONFIG_MACH_NETSPACE_MINI_V2_DT=y
-CONFIG_MACH_NETSPACE_V2_DT=y
-CONFIG_MACH_NSA310_DT=y
-CONFIG_MACH_OPENBLOCKS_A6_DT=y
-CONFIG_MACH_READYNAS_DT=y
-CONFIG_MACH_SHEEVAPLUG_DT=y
-CONFIG_MACH_TOPKICK_DT=y
-CONFIG_MACH_TS219_DT=y
+CONFIG_ARCH_KIRKWOOD_DT=y
+CONFIG_MACH_MV88F6281GTW_GE_DT=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
 CONFIG_PCI_MVEBU=y
 CONFIG_PREEMPT=y
@@ -92,6 +61,7 @@ CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ORION=y
 CONFIG_BLK_DEV_LOOP=y
+CONFIG_EEPROM_AT24=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=m
@@ -100,9 +70,9 @@ CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
-CONFIG_MII=y
 CONFIG_NET_DSA_MV88E6123_61_65=y
 CONFIG_MV643XX_ETH=y
+CONFIG_R8169=y
 CONFIG_MARVELL_PHY=y
 CONFIG_LIBERTAS=y
 CONFIG_LIBERTAS_SDIO=y
@@ -123,9 +93,11 @@ CONFIG_I2C_MV64XXX=y
 CONFIG_SPI=y
 CONFIG_SPI_ORION=y
 CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
+CONFIG_SENSORS_ADT7475=y
+CONFIG_SENSORS_LM63=y
+CONFIG_SENSORS_LM75=y
+CONFIG_SENSORS_LM85=y
 CONFIG_THERMAL=y
-CONFIG_KIRKWOOD_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_ORION_WATCHDOG=y
 CONFIG_HID_DRAGONRISE=y
@@ -164,6 +136,8 @@ CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_RS5C372=y
+CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_DRV_S35390A=y
 CONFIG_RTC_DRV_MV=y
 CONFIG_DMADEVICES=y
@@ -171,6 +145,7 @@ CONFIG_MV_XOR=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_UDF_FS=m
@@ -186,12 +161,12 @@ CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
 CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/koelsch_defconfig b/arch/arm/configs/koelsch_defconfig
new file mode 100644
index 0000000..825c16d
--- /dev/null
+++ b/arch/arm/configs/koelsch_defconfig
@@ -0,0 +1,54 @@
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+CONFIG_SLAB=y
+# CONFIG_BLOCK is not set
+CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_R8A7791=y
+CONFIG_MACH_KOELSCH=y
+# CONFIG_SWP_EMULATE is not set
+CONFIG_CPU_BPREDICT_DISABLE=y
+CONFIG_PL310_ERRATA_588369=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_SMP=y
+CONFIG_SCHED_MC=y
+CONFIG_NR_CPUS=8
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_KEXEC=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=20
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+CONFIG_RCAR_THERMAL=y
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_TMPFS=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_ARM_UNWIND is not set
diff --git a/arch/arm/configs/kota2_defconfig b/arch/arm/configs/lager_defconfig
index 57ad3d4..35bff5e 100644
--- a/arch/arm/configs/kota2_defconfig
+++ b/arch/arm/configs/lager_defconfig
@@ -1,52 +1,38 @@
-# CONFIG_ARM_PATCH_PHYS_VIRT is not set
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-CONFIG_CGROUPS=y
-CONFIG_CPUSETS=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
 CONFIG_SLAB=y
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_SHMOBILE=y
-CONFIG_KEYBOARD_GPIO_POLLED=y
-CONFIG_ARCH_SH73A0=y
-CONFIG_MACH_KOTA2=y
-CONFIG_MEMORY_SIZE=0x1e000000
+CONFIG_ARCH_R8A7790=y
+CONFIG_MACH_LAGER=y
 # CONFIG_SH_TIMER_TMU is not set
-# CONFIG_SWP_EMULATE is not set
-CONFIG_CPU_BPREDICT_DISABLE=y
+# CONFIG_EM_TIMER_STI is not set
+CONFIG_ARM_ERRATA_430973=y
+CONFIG_ARM_ERRATA_458693=y
 CONFIG_ARM_ERRATA_460075=y
-CONFIG_ARM_ERRATA_742230=y
-CONFIG_ARM_ERRATA_742231=y
-CONFIG_PL310_ERRATA_588369=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_PL310_ERRATA_727915=y
 CONFIG_ARM_ERRATA_743622=y
-CONFIG_ARM_ERRATA_751472=y
-CONFIG_PL310_ERRATA_753970=y
 CONFIG_ARM_ERRATA_754322=y
-CONFIG_PL310_ERRATA_769419=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
+CONFIG_HAVE_ARM_ARCH_TIMER=y
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_HIGHMEM=y
+CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel"
-CONFIG_CMDLINE_FORCE=y
+CONFIG_ARM_APPENDED_DTB=y
 CONFIG_KEXEC=y
-CONFIG_CPU_IDLE=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_VFP=y
+CONFIG_NEON=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
@@ -61,47 +47,50 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
-CONFIG_CFG80211=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_MAC80211=y
+# CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_BLK_DEV is not set
 CONFIG_NETDEVICES=y
+# CONFIG_NET_CORE is not set
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
 # CONFIG_NET_VENDOR_FARADAY is not set
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+CONFIG_SH_ETH=y
 # CONFIG_NET_VENDOR_SEEQ is not set
-CONFIG_SMSC911X=y
+# CONFIG_NET_VENDOR_SMSC is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-CONFIG_B43=y
-CONFIG_B43_PHY_N=y
-CONFIG_B43_DEBUG=y
-CONFIG_INPUT_SPARSEKMAP=y
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_SH_KEYSC=y
 # CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=9
+CONFIG_SERIAL_SH_SCI_NR_UARTS=10
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
 CONFIG_I2C_SH_MOBILE=y
+CONFIG_GPIO_SH_PFC=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_RCAR=y
 # CONFIG_HWMON is not set
-CONFIG_BCMA=y
-CONFIG_BCMA_DEBUG=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_LCD_PLATFORM=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_HID_SUPPORT is not set
+CONFIG_THERMAL=y
+CONFIG_RCAR_THERMAL=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_DRM=y
+CONFIG_DRM_RCAR_DU=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 CONFIG_MMC_SDHI=y
@@ -109,13 +98,25 @@ CONFIG_MMC_SH_MMCIF=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_RENESAS_TPU=y
-CONFIG_LEDS_TRIGGERS=y
+CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_SH_DMAE=y
+# CONFIG_IOMMU_SUPPORT is not set
 # CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
+CONFIG_CONFIGFS_FS=y
 # CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_INFO_REDUCED=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index 494e70a..5cc6360 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -29,6 +29,7 @@ CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
 CONFIG_CMDLINE="console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on"
 CONFIG_CMDLINE_FORCE=y
 CONFIG_KEXEC=y
@@ -84,6 +85,15 @@ CONFIG_GPIO_RCAR=y
 CONFIG_THERMAL=y
 CONFIG_RCAR_THERMAL=y
 CONFIG_SSB=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=y
+CONFIG_VIDEO_RCAR_VIN=y
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+CONFIG_VIDEO_ADV7180=y
+CONFIG_DRM=y
+CONFIG_DRM_RCAR_DU=y
 CONFIG_USB=y
 CONFIG_USB_RCAR_PHY=y
 CONFIG_MMC=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 6e572c6..4a5903e 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -6,6 +6,7 @@ CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_ARMADA_370=y
 CONFIG_MACH_ARMADA_XP=y
 CONFIG_ARCH_BCM=y
+CONFIG_ARCH_BCM_MOBILE=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_ARCH_HIGHBANK=y
 CONFIG_ARCH_KEYSTONE=y
@@ -36,6 +37,7 @@ CONFIG_ARCH_TEGRA_114_SOC=y
 CONFIG_TEGRA_PCI=y
 CONFIG_TEGRA_EMC_SCALING_ENABLE=y
 CONFIG_ARCH_U8500=y
+CONFIG_MACH_HREFV60=y
 CONFIG_MACH_SNOWBALL=y
 CONFIG_MACH_UX500_DT=y
 CONFIG_ARCH_VEXPRESS=y
@@ -46,6 +48,7 @@ CONFIG_ARCH_ZYNQ=y
 CONFIG_SMP=y
 CONFIG_HIGHPTE=y
 CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
@@ -133,6 +136,7 @@ CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_MMC_SDHCI_TEGRA=y
 CONFIG_MMC_SDHCI_SPEAR=y
 CONFIG_MMC_OMAP=y
diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig
index 731814e..594d706 100644
--- a/arch/arm/configs/mvebu_defconfig
+++ b/arch/arm/configs/mvebu_defconfig
@@ -39,6 +39,8 @@ CONFIG_MVNETA=y
 CONFIG_MARVELL_PHY=y
 CONFIG_MWIFIEX=y
 CONFIG_MWIFIEX_SDIO=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_I2C=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index 1d6d8fb..6150108 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -27,7 +26,6 @@ CONFIG_ARCH_MXS=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y
-CONFIG_AUTO_ZRELADDR=y
 CONFIG_FPE_NWFPE=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -43,8 +41,6 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
 CONFIG_CAN_FLEXCAN=m
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
@@ -52,7 +48,6 @@ CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_M25P80=y
@@ -67,12 +62,12 @@ CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
 CONFIG_ENC28J60=y
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_SMSC95XX=y
 CONFIG_SMSC_PHY=y
 CONFIG_ICPLUS_PHY=y
 CONFIG_REALTEK_PHY=y
 CONFIG_MICREL_PHY=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_SMSC95XX=y
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
@@ -81,7 +76,6 @@ CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_TSC2007=m
 # CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
@@ -96,7 +90,6 @@ CONFIG_I2C_MXS=y
 CONFIG_SPI=y
 CONFIG_SPI_GPIO=m
 CONFIG_SPI_MXS=y
-CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
@@ -110,7 +103,6 @@ CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
 CONFIG_SND=y
@@ -119,11 +111,14 @@ CONFIG_SND_MXS_SOC=y
 CONFIG_SND_SOC_MXS_SGTL5000=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
 CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_PHY=y
 CONFIG_USB_MXS_PHY=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_MMC=y
 CONFIG_MMC_UNSAFE_RESUME=y
 CONFIG_MMC_MXS=y
@@ -143,9 +138,9 @@ CONFIG_DMADEVICES=y
 CONFIG_MXS_DMA=y
 CONFIG_STAGING=y
 CONFIG_MXS_LRADC=y
-CONFIG_IIO_SYSFS_TRIGGER=y
 CONFIG_COMMON_CLK_DEBUG=y
 CONFIG_IIO=y
+CONFIG_IIO_SYSFS_TRIGGER=y
 CONFIG_PWM=y
 CONFIG_PWM_MXS=y
 CONFIG_EXT2_FS=y
@@ -173,14 +168,14 @@ CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=y
 CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
 CONFIG_FRAME_WARN=2048
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_UNUSED_SYMBOLS=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOCKUP_DETECTOR=y
 CONFIG_TIMER_STATS=y
 CONFIG_PROVE_LOCKING=y
-CONFIG_DEBUG_INFO=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_STRICT_DEVMEM=y
 CONFIG_DEBUG_USER=y
@@ -188,3 +183,4 @@ CONFIG_DEBUG_USER=y
 # CONFIG_CRYPTO_HW is not set
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC7=m
+CONFIG_FONTS=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 5339e6a..98a50c3 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -1,14 +1,13 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_SLAB=y
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
@@ -20,22 +19,21 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_MULTI_V6=y
-CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX_DEBUG=y
 CONFIG_ARCH_OMAP2=y
 CONFIG_ARCH_OMAP3=y
 CONFIG_ARCH_OMAP4=y
+CONFIG_SOC_OMAP5=y
 CONFIG_SOC_AM33XX=y
-CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_ARCH_VEXPRESS_CA9X4=y
+CONFIG_SOC_DRA7XX=y
 CONFIG_ARM_THUMBEE=y
 CONFIG_ARM_ERRATA_411920=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
-CONFIG_LEDS=y
+CONFIG_CMA=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
@@ -61,8 +59,6 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
 CONFIG_CAN_C_CAN=m
 CONFIG_CAN_C_CAN_PLATFORM=m
 CONFIG_BT=m
@@ -77,13 +73,13 @@ CONFIG_MAC80211=m
 CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_CMA=y
-CONFIG_CONNECTOR=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_DMA_CMA=y
+CONFIG_OMAP_OCP2SCP=y
+CONFIG_CONNECTOR=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_OOPS=y
 CONFIG_MTD_CFI=y
@@ -97,32 +93,40 @@ CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SENSORS_LIS3LV02D=m
 CONFIG_SENSORS_TSL2550=m
-CONFIG_SENSORS_LIS3_I2C=m
 CONFIG_BMP085_I2C=m
+CONFIG_SENSORS_LIS3_I2C=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_MD=y
 CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_SMSC911X=y
 CONFIG_KS8851=y
 CONFIG_KS8851_MLL=y
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_LIBERTAS_DEBUG=y
+CONFIG_SMC91X=y
+CONFIG_SMSC911X=y
+CONFIG_TI_CPSW=y
+CONFIG_AT803X_PHY=y
+CONFIG_SMSC_PHY=y
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC95XX=y
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
 CONFIG_USB_EPSON2888=y
 CONFIG_USB_KC2190=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_DEBUG=y
+CONFIG_WL_TI=y
+CONFIG_WL12XX=m
+CONFIG_WL18XX=m
+CONFIG_WLCORE_SPI=m
+CONFIG_WLCORE_SDIO=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_USB=m
 CONFIG_INPUT_JOYDEV=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
@@ -132,7 +136,6 @@ CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_TWL4030_PWRBUTTON=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
@@ -142,8 +145,7 @@ CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_OMAP=y
 CONFIG_SERIAL_OMAP_CONSOLE=y
 CONFIG_HW_RANDOM=y
@@ -157,50 +159,44 @@ CONFIG_GPIO_TWL4030=y
 CONFIG_W1=y
 CONFIG_POWER_SUPPLY=y
 CONFIG_SENSORS_LM75=m
-CONFIG_WATCHDOG=y
 CONFIG_THERMAL=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
 CONFIG_THERMAL_GOV_FAIR_SHARE=y
-CONFIG_THERMAL_GOV_STEP_WISE=y
 CONFIG_THERMAL_GOV_USER_SPACE=y
-CONFIG_CPU_THERMAL=y
+CONFIG_TI_SOC_THERMAL=y
+CONFIG_OMAP4_THERMAL=y
+CONFIG_OMAP5_THERMAL=y
+CONFIG_DRA752_THERMAL=y
+CONFIG_WATCHDOG=y
 CONFIG_OMAP_WATCHDOG=y
 CONFIG_TWL4030_WATCHDOG=y
+CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65217=y
 CONFIG_MFD_TPS65910=y
 CONFIG_TWL6040_CORE=y
-CONFIG_REGULATOR_TWL4030=y
+CONFIG_REGULATOR_PALMAS=y
 CONFIG_REGULATOR_TPS65023=y
 CONFIG_REGULATOR_TPS6507X=y
 CONFIG_REGULATOR_TPS65217=y
 CONFIG_REGULATOR_TPS65910=y
+CONFIG_REGULATOR_TWL4030=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_OMAP_LCD_VGA=y
 CONFIG_OMAP2_DSS=m
-CONFIG_OMAP2_DSS_RFBI=y
 CONFIG_OMAP2_DSS_SDI=y
 CONFIG_OMAP2_DSS_DSI=y
 CONFIG_FB_OMAP2=m
-CONFIG_PANEL_GENERIC_DPI=m
-CONFIG_PANEL_TFP410=m
-CONFIG_PANEL_SHARP_LS037V7DW01=m
-CONFIG_PANEL_NEC_NL8048HL11_01B=m
-CONFIG_PANEL_TAAL=m
-CONFIG_PANEL_TPO_TD043MTEA1=m
-CONFIG_PANEL_ACX565AKM=m
+CONFIG_DISPLAY_ENCODER_TFP410=m
+CONFIG_DISPLAY_ENCODER_TPD12S015=m
+CONFIG_DISPLAY_CONNECTOR_DVI=m
+CONFIG_DISPLAY_CONNECTOR_HDMI=m
+CONFIG_DISPLAY_PANEL_DPI=m
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=y
-CONFIG_DISPLAY_SUPPORT=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
 CONFIG_SND=m
@@ -217,14 +213,14 @@ CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
 CONFIG_USB_MON=y
 CONFIG_USB_WDM=y
 CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
+CONFIG_USB_DWC3=m
 CONFIG_USB_TEST=y
-CONFIG_USB_PHY=y
 CONFIG_NOP_USB_XCEIV=y
+CONFIG_OMAP_USB2=y
+CONFIG_OMAP_USB3=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
@@ -233,7 +229,6 @@ CONFIG_USB_ZERO=m
 CONFIG_MMC=y
 CONFIG_MMC_UNSAFE_RESUME=y
 CONFIG_SDIO_UART=y
-CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_OMAP=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NEW_LEDS=y
@@ -253,11 +248,8 @@ CONFIG_RTC_DRV_OMAP=y
 CONFIG_DMADEVICES=y
 CONFIG_TI_EDMA=y
 CONFIG_DMA_OMAP=y
-CONFIG_TI_SOC_THERMAL=y
-CONFIG_TI_THERMAL=y
-CONFIG_OMAP4_THERMAL=y
-CONFIG_OMAP5_THERMAL=y
-CONFIG_DRA752_THERMAL=y
+CONFIG_EXTCON=y
+CONFIG_EXTCON_PALMAS=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
@@ -276,23 +268,18 @@ CONFIG_JFFS2_RUBIN=y
 CONFIG_UBIFS_FS=y
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
 CONFIG_PROVE_LOCKING=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
@@ -301,8 +288,6 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
 CONFIG_CRC7=y
 CONFIG_LIBCRC32C=y
-CONFIG_SOC_OMAP5=y
-CONFIG_TI_DAVINCI_MDIO=y
-CONFIG_TI_DAVINCI_CPDMA=y
-CONFIG_TI_CPSW=y
-CONFIG_AT803X_PHY=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
diff --git a/arch/arm/configs/shark_defconfig b/arch/arm/configs/shark_defconfig
deleted file mode 100644
index e319b2c..0000000
--- a/arch/arm/configs/shark_defconfig
+++ /dev/null
@@ -1,80 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_SHARK=y
-CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_CS89x0=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_PRINTER=m
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_CYBER2000=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=m
-CONFIG_SOUND_PRIME=m
-CONFIG_SOUND_OSS=m
-CONFIG_SOUND_SB=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_CMOS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFSD=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
new file mode 100644
index 0000000..d57a85b
--- /dev/null
+++ b/arch/arm/configs/sunxi_defconfig
@@ -0,0 +1,61 @@
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SMP=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_HIGHPTE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_NETDEVICES=y
+CONFIG_SUN4I_EMAC=y
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_WLAN is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=8
+CONFIG_SERIAL_8250_DW=y
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MV64XXX=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_SUNXI_WATCHDOG=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_COMMON_CLK_DEBUG=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_NLS=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index 1effb43..4934295 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -1,3 +1,4 @@
+CONFIG_SYSVIPC=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
@@ -26,8 +27,12 @@ CONFIG_ARCH_TEGRA=y
 CONFIG_ARCH_TEGRA_2x_SOC=y
 CONFIG_ARCH_TEGRA_3x_SOC=y
 CONFIG_ARCH_TEGRA_114_SOC=y
-CONFIG_TEGRA_PCI=y
+CONFIG_ARCH_TEGRA_124_SOC=y
 CONFIG_TEGRA_EMC_SCALING_ENABLE=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_TEGRA=y
+CONFIG_PCIEPORTBUS=y
 CONFIG_SMP=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
@@ -37,9 +42,11 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_IDLE=y
 CONFIG_VFP=y
+CONFIG_NEON=y
 CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -79,6 +86,7 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 CONFIG_CMA=y
+CONFIG_DMA_CMA=y
 CONFIG_MTD=y
 CONFIG_MTD_M25P80=y
 CONFIG_PROC_DEVICETREE=y
@@ -91,6 +99,7 @@ CONFIG_ISL29003=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
+CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
@@ -105,6 +114,7 @@ CONFIG_RT2800USB=m
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_TEGRA=y
+CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_MPU3050=y
 # CONFIG_LEGACY_PTYS is not set
@@ -122,6 +132,7 @@ CONFIG_SPI=y
 CONFIG_SPI_TEGRA114=y
 CONFIG_SPI_TEGRA20_SFLASH=y
 CONFIG_SPI_TEGRA20_SLINK=y
+CONFIG_PINCTRL_PALMAS=y
 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_PALMAS=y
 CONFIG_GPIO_TPS6586X=y
@@ -177,6 +188,7 @@ CONFIG_SND_SOC_TEGRA_WM8903=y
 CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
 CONFIG_SND_SOC_TEGRA_ALC5632=y
 CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_TEGRA=y
 CONFIG_USB_ACM=y
@@ -215,6 +227,7 @@ CONFIG_KEYBOARD_NVEC=y
 CONFIG_SERIO_NVEC_PS2=y
 CONFIG_NVEC_POWER=y
 CONFIG_NVEC_PAZ00=y
+CONFIG_COMMON_CLK_DEBUG=y
 CONFIG_TEGRA_IOMMU_GART=y
 CONFIG_TEGRA_IOMMU_SMMU=y
 CONFIG_MEMORY=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index a0025dc..ac632cc 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -1,4 +1,3 @@
-CONFIG_HIGHMEM=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ=y
@@ -16,6 +15,9 @@ CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
@@ -68,8 +70,8 @@ CONFIG_CPU_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_TC3589X=y
-CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_AB8500=y
+CONFIG_REGULATOR_GPIO=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SOC=y
@@ -78,10 +80,8 @@ CONFIG_SND_SOC_UX500_MACH_MOP500=y
 CONFIG_USB=y
 CONFIG_USB_MUSB_HDRC=y
 CONFIG_USB_MUSB_UX500=y
-CONFIG_USB_PHY=y
 CONFIG_AB8500_USB=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
 CONFIG_USB_ETH=m
 CONFIG_MMC=y
 CONFIG_MMC_UNSAFE_RESUME=y
@@ -116,12 +116,12 @@ CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
 CONFIG_CRYPTO_DEV_UX500=y
diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig
index f2de51f..f489fda 100644
--- a/arch/arm/configs/vexpress_defconfig
+++ b/arch/arm/configs/vexpress_defconfig
@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
@@ -8,11 +7,9 @@ CONFIG_CGROUPS=y
 CONFIG_CPUSETS=y
 # CONFIG_UTS_NS is not set
 # CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_MODULES=y
@@ -23,14 +20,22 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_VEXPRESS=y
 CONFIG_ARCH_VEXPRESS_CA9X4=y
+CONFIG_ARCH_VEXPRESS_DCSCB=y
+CONFIG_ARCH_VEXPRESS_TC2_PM=y
 # CONFIG_SWP_EMULATE is not set
 CONFIG_SMP=y
+CONFIG_HAVE_ARM_ARCH_TIMER=y
+CONFIG_MCPM=y
 CONFIG_VMSPLIT_2G=y
-CONFIG_HOTPLUG_CPU=y
+CONFIG_NR_CPUS=8
+CONFIG_ARM_PSCI=y
 CONFIG_AEABI=y
+CONFIG_CMA=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
+CONFIG_CMDLINE="console=ttyAMA0"
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
@@ -44,37 +49,46 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
+CONFIG_NET_9P=y
+CONFIG_NET_9P_VIRTIO=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_ARM_INTEGRATOR=y
-CONFIG_MISC_DEVICES=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_MTD_UBI=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_VIRTIO_BLK=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_SCSI_VIRTIO=y
 CONFIG_ATA=y
 # CONFIG_SATA_PMP is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
+CONFIG_VIRTIO_NET=y
+CONFIG_SMC91X=y
 CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_AMBAKMI=y
+CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_VIRTIO=y
+CONFIG_I2C=y
+CONFIG_I2C_VERSATILE=y
+CONFIG_SENSORS_VEXPRESS=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_VEXPRESS=y
 CONFIG_FB=y
 CONFIG_FB_ARMCLCD=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
@@ -103,38 +117,45 @@ CONFIG_HID_THRUSTMASTER=y
 CONFIG_HID_ZEROPLUS=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-# CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_MON=y
 CONFIG_USB_ISP1760_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PL031=y
+CONFIG_VIRTIO_BALLOON=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
 CONFIG_CRAMFS=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_LZO=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_9P_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
diff --git a/arch/arm/crypto/aes-armv4.S b/arch/arm/crypto/aes-armv4.S
index 19d6cd6..3a14ea8 100644
--- a/arch/arm/crypto/aes-armv4.S
+++ b/arch/arm/crypto/aes-armv4.S
@@ -148,7 +148,7 @@ AES_Te:
 @ 		 const AES_KEY *key) {
 .align	5
 ENTRY(AES_encrypt)
-	sub	r3,pc,#8		@ AES_encrypt
+	adr	r3,AES_encrypt
 	stmdb   sp!,{r1,r4-r12,lr}
 	mov	r12,r0		@ inp
 	mov	r11,r2
@@ -381,7 +381,7 @@ _armv4_AES_encrypt:
 .align	5
 ENTRY(private_AES_set_encrypt_key)
 _armv4_AES_set_encrypt_key:
-	sub	r3,pc,#8		@ AES_set_encrypt_key
+	adr	r3,_armv4_AES_set_encrypt_key
 	teq	r0,#0
 	moveq	r0,#-1
 	beq	.Labrt
@@ -843,7 +843,7 @@ AES_Td:
 @ 		 const AES_KEY *key) {
 .align	5
 ENTRY(AES_decrypt)
-	sub	r3,pc,#8		@ AES_decrypt
+	adr	r3,AES_decrypt
 	stmdb   sp!,{r1,r4-r12,lr}
 	mov	r12,r0		@ inp
 	mov	r11,r2
diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild
index d3db398..59ceae8 100644
--- a/arch/arm/include/asm/Kbuild
+++ b/arch/arm/include/asm/Kbuild
@@ -31,5 +31,4 @@ generic-y += termbits.h
 generic-y += termios.h
 generic-y += timex.h
 generic-y += trace_clock.h
-generic-y += types.h
 generic-y += unaligned.h
diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h
index e406d57..5665134 100644
--- a/arch/arm/include/asm/arch_timer.h
+++ b/arch/arm/include/asm/arch_timer.h
@@ -17,7 +17,8 @@ int arch_timer_arch_init(void);
  * nicely work out which register we want, and chuck away the rest of
  * the code. At least it does so with a recent GCC (4.6.3).
  */
-static inline void arch_timer_reg_write(const int access, const int reg, u32 val)
+static __always_inline
+void arch_timer_reg_write_cp15(int access, enum arch_timer_reg reg, u32 val)
 {
 	if (access == ARCH_TIMER_PHYS_ACCESS) {
 		switch (reg) {
@@ -28,9 +29,7 @@ static inline void arch_timer_reg_write(const int access, const int reg, u32 val
 			asm volatile("mcr p15, 0, %0, c14, c2, 0" : : "r" (val));
 			break;
 		}
-	}
-
-	if (access == ARCH_TIMER_VIRT_ACCESS) {
+	} else if (access == ARCH_TIMER_VIRT_ACCESS) {
 		switch (reg) {
 		case ARCH_TIMER_REG_CTRL:
 			asm volatile("mcr p15, 0, %0, c14, c3, 1" : : "r" (val));
@@ -44,7 +43,8 @@ static inline void arch_timer_reg_write(const int access, const int reg, u32 val
 	isb();
 }
 
-static inline u32 arch_timer_reg_read(const int access, const int reg)
+static __always_inline
+u32 arch_timer_reg_read_cp15(int access, enum arch_timer_reg reg)
 {
 	u32 val = 0;
 
@@ -57,9 +57,7 @@ static inline u32 arch_timer_reg_read(const int access, const int reg)
 			asm volatile("mrc p15, 0, %0, c14, c2, 0" : "=r" (val));
 			break;
 		}
-	}
-
-	if (access == ARCH_TIMER_VIRT_ACCESS) {
+	} else if (access == ARCH_TIMER_VIRT_ACCESS) {
 		switch (reg) {
 		case ARCH_TIMER_REG_CTRL:
 			asm volatile("mrc p15, 0, %0, c14, c3, 1" : "=r" (val));
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index a5fef71..fcc1b5b 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -220,9 +220,9 @@
 #ifdef CONFIG_SMP
 #if __LINUX_ARM_ARCH__ >= 7
 	.ifeqs "\mode","arm"
-	ALT_SMP(dmb)
+	ALT_SMP(dmb	ish)
 	.else
-	ALT_SMP(W(dmb))
+	ALT_SMP(W(dmb)	ish)
 	.endif
 #elif __LINUX_ARM_ARCH__ == 6
 	ALT_SMP(mcr	p15, 0, r0, c7, c10, 5)	@ dmb
diff --git a/arch/arm/include/asm/barrier.h b/arch/arm/include/asm/barrier.h
index 8dcd9c7..60f15e2 100644
--- a/arch/arm/include/asm/barrier.h
+++ b/arch/arm/include/asm/barrier.h
@@ -14,27 +14,27 @@
 #endif
 
 #if __LINUX_ARM_ARCH__ >= 7
-#define isb() __asm__ __volatile__ ("isb" : : : "memory")
-#define dsb() __asm__ __volatile__ ("dsb" : : : "memory")
-#define dmb() __asm__ __volatile__ ("dmb" : : : "memory")
+#define isb(option) __asm__ __volatile__ ("isb " #option : : : "memory")
+#define dsb(option) __asm__ __volatile__ ("dsb " #option : : : "memory")
+#define dmb(option) __asm__ __volatile__ ("dmb " #option : : : "memory")
 #elif defined(CONFIG_CPU_XSC3) || __LINUX_ARM_ARCH__ == 6
-#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \
+#define isb(x) __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \
 				    : : "r" (0) : "memory")
-#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
+#define dsb(x) __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
 				    : : "r" (0) : "memory")
-#define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
+#define dmb(x) __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
 				    : : "r" (0) : "memory")
 #elif defined(CONFIG_CPU_FA526)
-#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \
+#define isb(x) __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \
 				    : : "r" (0) : "memory")
-#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
+#define dsb(x) __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
 				    : : "r" (0) : "memory")
-#define dmb() __asm__ __volatile__ ("" : : : "memory")
+#define dmb(x) __asm__ __volatile__ ("" : : : "memory")
 #else
-#define isb() __asm__ __volatile__ ("" : : : "memory")
-#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
+#define isb(x) __asm__ __volatile__ ("" : : : "memory")
+#define dsb(x) __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
 				    : : "r" (0) : "memory")
-#define dmb() __asm__ __volatile__ ("" : : : "memory")
+#define dmb(x) __asm__ __volatile__ ("" : : : "memory")
 #endif
 
 #ifdef CONFIG_ARCH_HAS_BARRIERS
@@ -42,7 +42,7 @@
 #elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP)
 #define mb()		do { dsb(); outer_sync(); } while (0)
 #define rmb()		dsb()
-#define wmb()		mb()
+#define wmb()		do { dsb(st); outer_sync(); } while (0)
 #else
 #define mb()		barrier()
 #define rmb()		barrier()
@@ -54,9 +54,9 @@
 #define smp_rmb()	barrier()
 #define smp_wmb()	barrier()
 #else
-#define smp_mb()	dmb()
-#define smp_rmb()	dmb()
-#define smp_wmb()	dmb()
+#define smp_mb()	dmb(ish)
+#define smp_rmb()	smp_mb()
+#define smp_wmb()	dmb(ishst)
 #endif
 
 #define read_barrier_depends()		do { } while(0)
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 17d0ae8..15f2d5b 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -268,8 +268,7 @@ extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr
  * Harvard caches are synchronised for the user space address range.
  * This is used for the ARM private sys_cacheflush system call.
  */
-#define flush_cache_user_range(start,end) \
-	__cpuc_coherent_user_range((start) & PAGE_MASK, PAGE_ALIGN(end))
+#define flush_cache_user_range(s,e)	__cpuc_coherent_user_range(s,e)
 
 /*
  * Perform necessary cache operations to ensure that data previously
@@ -352,7 +351,7 @@ static inline void flush_cache_vmap(unsigned long start, unsigned long end)
 		 * set_pte_at() called from vmap_pte_range() does not
 		 * have a DSB after cleaning the cache line.
 		 */
-		dsb();
+		dsb(ishst);
 }
 
 static inline void flush_cache_vunmap(unsigned long start, unsigned long end)
diff --git a/arch/arm/include/asm/dma-contiguous.h b/arch/arm/include/asm/dma-contiguous.h
index 3ed37b4..4f8e9e5 100644
--- a/arch/arm/include/asm/dma-contiguous.h
+++ b/arch/arm/include/asm/dma-contiguous.h
@@ -2,10 +2,9 @@
 #define ASMARM_DMA_CONTIGUOUS_H
 
 #ifdef __KERNEL__
-#ifdef CONFIG_CMA
+#ifdef CONFIG_DMA_CMA
 
 #include <linux/types.h>
-#include <asm-generic/dma-contiguous.h>
 
 void dma_contiguous_early_fixup(phys_addr_t base, unsigned long size);
 
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index 56211f2..f4b46d3 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -19,8 +19,6 @@ typedef elf_greg_t elf_gregset_t[ELF_NGREG];
 
 typedef struct user_fp elf_fpregset_t;
 
-#define EM_ARM	40
-
 #define EF_ARM_EABI_MASK	0xff000000
 #define EF_ARM_EABI_UNKNOWN	0x00000000
 #define EF_ARM_EABI_VER1	0x01000000
diff --git a/arch/arm/include/asm/hardware/debug-8250.S b/arch/arm/include/asm/hardware/debug-8250.S
deleted file mode 100644
index 22c6892..0000000
--- a/arch/arm/include/asm/hardware/debug-8250.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * arch/arm/include/asm/hardware/debug-8250.S
- *
- *  Copyright (C) 1994-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/serial_reg.h>
-
-		.macro	senduart,rd,rx
-		strb	\rd, [\rx, #UART_TX << UART_SHIFT]
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldrb	\rd, [\rx, #UART_LSR << UART_SHIFT]
-		and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
-		teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
-		bne	1002b
-		.endm
-
-		.macro	waituart,rd,rx
-#ifdef FLOW_CONTROL
-1001:		ldrb	\rd, [\rx, #UART_MSR << UART_SHIFT]
-		tst	\rd, #UART_MSR_CTS
-		beq	1001b
-#endif
-		.endm
diff --git a/arch/arm/include/asm/jump_label.h b/arch/arm/include/asm/jump_label.h
index bfc198c..863c892 100644
--- a/arch/arm/include/asm/jump_label.h
+++ b/arch/arm/include/asm/jump_label.h
@@ -16,7 +16,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key *key)
 {
-	asm goto("1:\n\t"
+	asm_volatile_goto("1:\n\t"
 		 JUMP_LABEL_NOP "\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 ".word 1b, %l[l_yes], %c0\n\t"
diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h
index 472ac70..9b28c41 100644
--- a/arch/arm/include/asm/kvm_mmu.h
+++ b/arch/arm/include/asm/kvm_mmu.h
@@ -64,7 +64,7 @@ void kvm_clear_hyp_idmap(void);
 
 static inline void kvm_set_pte(pte_t *pte, pte_t new_pte)
 {
-	pte_val(*pte) = new_pte;
+	*pte = new_pte;
 	/*
 	 * flush_pmd_entry just takes a void pointer and cleans the necessary
 	 * cache entries, so we can reuse the function for ptes.
diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h
deleted file mode 100644
index f77ffc1..0000000
--- a/arch/arm/include/asm/localtimer.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- *  arch/arm/include/asm/localtimer.h
- *
- *  Copyright (C) 2004-2005 ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_LOCALTIMER_H
-#define __ASM_ARM_LOCALTIMER_H
-
-#include <linux/errno.h>
-
-struct clock_event_device;
-
-struct local_timer_ops {
-	int  (*setup)(struct clock_event_device *);
-	void (*stop)(struct clock_event_device *);
-};
-
-#ifdef CONFIG_LOCAL_TIMERS
-/*
- * Register a local timer driver
- */
-int local_timer_register(struct local_timer_ops *);
-#else
-static inline int local_timer_register(struct local_timer_ops *ops)
-{
-	return -ENXIO;
-}
-#endif
-
-#endif
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 441efc4..402a2bc 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -35,7 +35,7 @@ struct machine_desc {
 	unsigned int		nr_irqs;	/* number of IRQs */
 
 #ifdef CONFIG_ZONE_DMA
-	unsigned long		dma_zone_size;	/* size of DMA-able area */
+	phys_addr_t		dma_zone_size;	/* size of DMA-able area */
 #endif
 
 	unsigned int		video_start;	/* start of video RAM	*/
@@ -65,12 +65,12 @@ struct machine_desc {
 /*
  * Current machine - only accessible during boot.
  */
-extern struct machine_desc *machine_desc;
+extern const struct machine_desc *machine_desc;
 
 /*
  * Machine type table - also only accessible during boot
  */
-extern struct machine_desc __arch_info_begin[], __arch_info_end[];
+extern const struct machine_desc __arch_info_begin[], __arch_info_end[];
 #define for_each_machine_desc(p)			\
 	for (p = __arch_info_begin; p < __arch_info_end; p++)
 
diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h
index a1c90d7..7fc4278 100644
--- a/arch/arm/include/asm/mach/pci.h
+++ b/arch/arm/include/asm/mach/pci.h
@@ -36,6 +36,8 @@ struct hw_pci {
 					  resource_size_t start,
 					  resource_size_t size,
 					  resource_size_t align);
+	void		(*add_bus)(struct pci_bus *bus);
+	void		(*remove_bus)(struct pci_bus *bus);
 };
 
 /*
@@ -63,6 +65,8 @@ struct pci_sys_data {
 					  resource_size_t start,
 					  resource_size_t size,
 					  resource_size_t align);
+	void		(*add_bus)(struct pci_bus *bus);
+	void		(*remove_bus)(struct pci_bus *bus);
 	void		*private_data;	/* platform controller private data	*/
 };
 
@@ -102,8 +106,4 @@ extern int dc21285_setup(int nr, struct pci_sys_data *);
 extern void dc21285_preinit(void);
 extern void dc21285_postinit(void);
 
-extern struct pci_ops via82c505_ops;
-extern int via82c505_setup(int nr, struct pci_sys_data *);
-extern void via82c505_init(void *sysdata);
-
 #endif /* __ASM_MACH_PCI_H */
diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h
index 0f7b762..fc82a88 100644
--- a/arch/arm/include/asm/mcpm.h
+++ b/arch/arm/include/asm/mcpm.h
@@ -76,8 +76,11 @@ int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster);
  *
  * This must be called with interrupts disabled.
  *
- * This does not return.  Re-entry in the kernel is expected via
- * mcpm_entry_point.
+ * On success this does not return.  Re-entry in the kernel is expected
+ * via mcpm_entry_point.
+ *
+ * This will return if mcpm_platform_register() has not been called
+ * previously in which case the caller should take appropriate action.
  */
 void mcpm_cpu_power_down(void);
 
@@ -98,8 +101,11 @@ void mcpm_cpu_power_down(void);
  *
  * This must be called with interrupts disabled.
  *
- * This does not return.  Re-entry in the kernel is expected via
- * mcpm_entry_point.
+ * On success this does not return.  Re-entry in the kernel is expected
+ * via mcpm_entry_point.
+ *
+ * This will return if mcpm_platform_register() has not been called
+ * previously in which case the caller should take appropriate action.
  */
 void mcpm_cpu_suspend(u64 expected_residency);
 
diff --git a/arch/arm/include/asm/memblock.h b/arch/arm/include/asm/memblock.h
index 00ca5f9..c2f5102 100644
--- a/arch/arm/include/asm/memblock.h
+++ b/arch/arm/include/asm/memblock.h
@@ -4,8 +4,7 @@
 struct meminfo;
 struct machine_desc;
 
-extern void arm_memblock_init(struct meminfo *, struct machine_desc *);
-
+void arm_memblock_init(struct meminfo *, const struct machine_desc *);
 phys_addr_t arm_memblock_steal(phys_addr_t size, phys_addr_t align);
 
 #endif
diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h
index 0d3a28d..ed690c4 100644
--- a/arch/arm/include/asm/module.h
+++ b/arch/arm/include/asm/module.h
@@ -12,6 +12,8 @@ enum {
 	ARM_SEC_CORE,
 	ARM_SEC_EXIT,
 	ARM_SEC_DEVEXIT,
+	ARM_SEC_HOT,
+	ARM_SEC_UNLIKELY,
 	ARM_SEC_MAX,
 };
 
diff --git a/arch/arm/include/asm/neon.h b/arch/arm/include/asm/neon.h
new file mode 100644
index 0000000..8f730fe
--- /dev/null
+++ b/arch/arm/include/asm/neon.h
@@ -0,0 +1,36 @@
+/*
+ * linux/arch/arm/include/asm/neon.h
+ *
+ * Copyright (C) 2013 Linaro Ltd <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/hwcap.h>
+
+#define cpu_has_neon()		(!!(elf_hwcap & HWCAP_NEON))
+
+#ifdef __ARM_NEON__
+
+/*
+ * If you are affected by the BUILD_BUG below, it probably means that you are
+ * using NEON code /and/ calling the kernel_neon_begin() function from the same
+ * compilation unit. To prevent issues that may arise from GCC reordering or
+ * generating(1) NEON instructions outside of these begin/end functions, the
+ * only supported way of using NEON code in the kernel is by isolating it in a
+ * separate compilation unit, and calling it from another unit from inside a
+ * kernel_neon_begin/kernel_neon_end pair.
+ *
+ * (1) Current GCC (4.7) might generate NEON instructions at O3 level if
+ *     -mpfu=neon is set.
+ */
+
+#define kernel_neon_begin() \
+	BUILD_BUG_ON_MSG(1, "kernel_neon_begin() called from NEON code")
+
+#else
+void kernel_neon_begin(void);
+#endif
+void kernel_neon_end(void);
diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h
index 12f71a1..f94784f 100644
--- a/arch/arm/include/asm/outercache.h
+++ b/arch/arm/include/asm/outercache.h
@@ -37,10 +37,10 @@ struct outer_cache_fns {
 	void (*resume)(void);
 };
 
-#ifdef CONFIG_OUTER_CACHE
-
 extern struct outer_cache_fns outer_cache;
 
+#ifdef CONFIG_OUTER_CACHE
+
 static inline void outer_inv_range(phys_addr_t start, phys_addr_t end)
 {
 	if (outer_cache.inv_range)
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 04aeb02..be956db 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -100,7 +100,7 @@ extern pgprot_t		pgprot_s2_device;
 #define PAGE_HYP		_MOD_PROT(pgprot_kernel, L_PTE_HYP)
 #define PAGE_HYP_DEVICE		_MOD_PROT(pgprot_hyp_device, L_PTE_HYP)
 #define PAGE_S2			_MOD_PROT(pgprot_s2, L_PTE_S2_RDONLY)
-#define PAGE_S2_DEVICE		_MOD_PROT(pgprot_s2_device, L_PTE_USER | L_PTE_S2_RDONLY)
+#define PAGE_S2_DEVICE		_MOD_PROT(pgprot_s2_device, L_PTE_S2_RDWR)
 
 #define __PAGE_NONE		__pgprot(_L_PTE_DEFAULT | L_PTE_RDONLY | L_PTE_XN | L_PTE_NONE)
 #define __PAGE_SHARED		__pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_XN)
diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h
index a219227..4a2985e 100644
--- a/arch/arm/include/asm/prom.h
+++ b/arch/arm/include/asm/prom.h
@@ -15,13 +15,13 @@
 
 #ifdef CONFIG_OF
 
-extern struct machine_desc *setup_machine_fdt(unsigned int dt_phys);
+extern const struct machine_desc *setup_machine_fdt(unsigned int dt_phys);
 extern void arm_dt_memblock_reserve(void);
 extern void __init arm_dt_init_cpu_maps(void);
 
 #else /* CONFIG_OF */
 
-static inline struct machine_desc *setup_machine_fdt(unsigned int dt_phys)
+static inline const struct machine_desc *setup_machine_fdt(unsigned int dt_phys)
 {
 	return NULL;
 }
diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h
deleted file mode 100644
index 2389b71..0000000
--- a/arch/arm/include/asm/sched_clock.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* You shouldn't include this file. Use linux/sched_clock.h instead.
- * Temporary file until all asm/sched_clock.h users are gone
- */
-#include <linux/sched_clock.h>
diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h
index b07c09e..4f2c280 100644
--- a/arch/arm/include/asm/spinlock.h
+++ b/arch/arm/include/asm/spinlock.h
@@ -46,7 +46,7 @@ static inline void dsb_sev(void)
 {
 #if __LINUX_ARM_ARCH__ >= 7
 	__asm__ __volatile__ (
-		"dsb\n"
+		"dsb ishst\n"
 		SEV
 	);
 #else
diff --git a/arch/arm/include/asm/switch_to.h b/arch/arm/include/asm/switch_to.h
index fa09e6b..c99e259 100644
--- a/arch/arm/include/asm/switch_to.h
+++ b/arch/arm/include/asm/switch_to.h
@@ -4,6 +4,16 @@
 #include <linux/thread_info.h>
 
 /*
+ * For v7 SMP cores running a preemptible kernel we may be pre-empted
+ * during a TLB maintenance operation, so execute an inner-shareable dsb
+ * to ensure that the maintenance completes in case we migrate to another
+ * CPU.
+ */
+#if defined(CONFIG_PREEMPT) && defined(CONFIG_SMP) && defined(CONFIG_CPU_V7)
+#define finish_arch_switch(prev)	dsb(ish)
+#endif
+
+/*
  * switch_to(prev, next) should switch from task `prev' to `next'
  * `prev' will never be the same as `next'.  schedule() itself
  * contains the memory barrier to tell GCC not to cache `current'.
diff --git a/arch/arm/include/asm/syscall.h b/arch/arm/include/asm/syscall.h
index f1d96d4..73ddd723 100644
--- a/arch/arm/include/asm/syscall.h
+++ b/arch/arm/include/asm/syscall.h
@@ -57,6 +57,9 @@ static inline void syscall_get_arguments(struct task_struct *task,
 					 unsigned int i, unsigned int n,
 					 unsigned long *args)
 {
+	if (n == 0)
+		return;
+
 	if (i + n > SYSCALL_MAX_ARGS) {
 		unsigned long *args_bad = args + SYSCALL_MAX_ARGS - i;
 		unsigned int n_bad = n + i - SYSCALL_MAX_ARGS;
@@ -81,6 +84,9 @@ static inline void syscall_set_arguments(struct task_struct *task,
 					 unsigned int i, unsigned int n,
 					 const unsigned long *args)
 {
+	if (n == 0)
+		return;
+
 	if (i + n > SYSCALL_MAX_ARGS) {
 		pr_warning("%s called with max args %d, handling only %d\n",
 			   __func__, i + n, SYSCALL_MAX_ARGS);
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 2b8114f..df5e13d 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -43,6 +43,16 @@ struct cpu_context_save {
 	__u32	extra[2];		/* Xscale 'acc' register, etc */
 };
 
+struct arm_restart_block {
+	union {
+		/* For user cache flushing */
+		struct {
+			unsigned long start;
+			unsigned long end;
+		} cache;
+	};
+};
+
 /*
  * low level task data that entry.S needs immediate access to.
  * __switch_to() assumes cpu_context follows immediately after cpu_domain.
@@ -68,6 +78,7 @@ struct thread_info {
 	unsigned long		thumbee_state;	/* ThumbEE Handler Base register */
 #endif
 	struct restart_block	restart_block;
+	struct arm_restart_block	arm_restart_block;
 };
 
 #define INIT_THREAD_INFO(tsk)						\
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index f467e9b..3896026 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -319,67 +319,110 @@ extern struct cpu_tlb_fns cpu_tlb;
 #define tlb_op(f, regs, arg)	__tlb_op(f, "p15, 0, %0, " regs, arg)
 #define tlb_l2_op(f, regs, arg)	__tlb_op(f, "p15, 1, %0, " regs, arg)
 
-static inline void local_flush_tlb_all(void)
+static inline void __local_flush_tlb_all(void)
 {
 	const int zero = 0;
 	const unsigned int __tlb_flag = __cpu_tlb_flags;
 
-	if (tlb_flag(TLB_WB))
-		dsb();
-
 	tlb_op(TLB_V4_U_FULL | TLB_V6_U_FULL, "c8, c7, 0", zero);
 	tlb_op(TLB_V4_D_FULL | TLB_V6_D_FULL, "c8, c6, 0", zero);
 	tlb_op(TLB_V4_I_FULL | TLB_V6_I_FULL, "c8, c5, 0", zero);
-	tlb_op(TLB_V7_UIS_FULL, "c8, c3, 0", zero);
+}
+
+static inline void local_flush_tlb_all(void)
+{
+	const int zero = 0;
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	if (tlb_flag(TLB_WB))
+		dsb(nshst);
+
+	__local_flush_tlb_all();
+	tlb_op(TLB_V7_UIS_FULL, "c8, c7, 0", zero);
 
 	if (tlb_flag(TLB_BARRIER)) {
-		dsb();
+		dsb(nsh);
 		isb();
 	}
 }
 
-static inline void local_flush_tlb_mm(struct mm_struct *mm)
+static inline void __flush_tlb_all(void)
 {
 	const int zero = 0;
-	const int asid = ASID(mm);
 	const unsigned int __tlb_flag = __cpu_tlb_flags;
 
 	if (tlb_flag(TLB_WB))
-		dsb();
+		dsb(ishst);
+
+	__local_flush_tlb_all();
+	tlb_op(TLB_V7_UIS_FULL, "c8, c3, 0", zero);
+
+	if (tlb_flag(TLB_BARRIER)) {
+		dsb(ish);
+		isb();
+	}
+}
+
+static inline void __local_flush_tlb_mm(struct mm_struct *mm)
+{
+	const int zero = 0;
+	const int asid = ASID(mm);
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
 
 	if (possible_tlb_flags & (TLB_V4_U_FULL|TLB_V4_D_FULL|TLB_V4_I_FULL)) {
-		if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) {
+		if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) {
 			tlb_op(TLB_V4_U_FULL, "c8, c7, 0", zero);
 			tlb_op(TLB_V4_D_FULL, "c8, c6, 0", zero);
 			tlb_op(TLB_V4_I_FULL, "c8, c5, 0", zero);
 		}
-		put_cpu();
 	}
 
 	tlb_op(TLB_V6_U_ASID, "c8, c7, 2", asid);
 	tlb_op(TLB_V6_D_ASID, "c8, c6, 2", asid);
 	tlb_op(TLB_V6_I_ASID, "c8, c5, 2", asid);
+}
+
+static inline void local_flush_tlb_mm(struct mm_struct *mm)
+{
+	const int asid = ASID(mm);
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	if (tlb_flag(TLB_WB))
+		dsb(nshst);
+
+	__local_flush_tlb_mm(mm);
+	tlb_op(TLB_V7_UIS_ASID, "c8, c7, 2", asid);
+
+	if (tlb_flag(TLB_BARRIER))
+		dsb(nsh);
+}
+
+static inline void __flush_tlb_mm(struct mm_struct *mm)
+{
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	if (tlb_flag(TLB_WB))
+		dsb(ishst);
+
+	__local_flush_tlb_mm(mm);
 #ifdef CONFIG_ARM_ERRATA_720789
-	tlb_op(TLB_V7_UIS_ASID, "c8, c3, 0", zero);
+	tlb_op(TLB_V7_UIS_ASID, "c8, c3, 0", 0);
 #else
-	tlb_op(TLB_V7_UIS_ASID, "c8, c3, 2", asid);
+	tlb_op(TLB_V7_UIS_ASID, "c8, c3, 2", ASID(mm));
 #endif
 
 	if (tlb_flag(TLB_BARRIER))
-		dsb();
+		dsb(ish);
 }
 
 static inline void
-local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
+__local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 {
 	const int zero = 0;
 	const unsigned int __tlb_flag = __cpu_tlb_flags;
 
 	uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm);
 
-	if (tlb_flag(TLB_WB))
-		dsb();
-
 	if (possible_tlb_flags & (TLB_V4_U_PAGE|TLB_V4_D_PAGE|TLB_V4_I_PAGE|TLB_V4_I_FULL) &&
 	    cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
 		tlb_op(TLB_V4_U_PAGE, "c8, c7, 1", uaddr);
@@ -392,6 +435,36 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 	tlb_op(TLB_V6_U_PAGE, "c8, c7, 1", uaddr);
 	tlb_op(TLB_V6_D_PAGE, "c8, c6, 1", uaddr);
 	tlb_op(TLB_V6_I_PAGE, "c8, c5, 1", uaddr);
+}
+
+static inline void
+local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
+{
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm);
+
+	if (tlb_flag(TLB_WB))
+		dsb(nshst);
+
+	__local_flush_tlb_page(vma, uaddr);
+	tlb_op(TLB_V7_UIS_PAGE, "c8, c7, 1", uaddr);
+
+	if (tlb_flag(TLB_BARRIER))
+		dsb(nsh);
+}
+
+static inline void
+__flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
+{
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm);
+
+	if (tlb_flag(TLB_WB))
+		dsb(ishst);
+
+	__local_flush_tlb_page(vma, uaddr);
 #ifdef CONFIG_ARM_ERRATA_720789
 	tlb_op(TLB_V7_UIS_PAGE, "c8, c3, 3", uaddr & PAGE_MASK);
 #else
@@ -399,19 +472,14 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 #endif
 
 	if (tlb_flag(TLB_BARRIER))
-		dsb();
+		dsb(ish);
 }
 
-static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
+static inline void __local_flush_tlb_kernel_page(unsigned long kaddr)
 {
 	const int zero = 0;
 	const unsigned int __tlb_flag = __cpu_tlb_flags;
 
-	kaddr &= PAGE_MASK;
-
-	if (tlb_flag(TLB_WB))
-		dsb();
-
 	tlb_op(TLB_V4_U_PAGE, "c8, c7, 1", kaddr);
 	tlb_op(TLB_V4_D_PAGE, "c8, c6, 1", kaddr);
 	tlb_op(TLB_V4_I_PAGE, "c8, c5, 1", kaddr);
@@ -421,26 +489,75 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
 	tlb_op(TLB_V6_U_PAGE, "c8, c7, 1", kaddr);
 	tlb_op(TLB_V6_D_PAGE, "c8, c6, 1", kaddr);
 	tlb_op(TLB_V6_I_PAGE, "c8, c5, 1", kaddr);
+}
+
+static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
+{
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	kaddr &= PAGE_MASK;
+
+	if (tlb_flag(TLB_WB))
+		dsb(nshst);
+
+	__local_flush_tlb_kernel_page(kaddr);
+	tlb_op(TLB_V7_UIS_PAGE, "c8, c7, 1", kaddr);
+
+	if (tlb_flag(TLB_BARRIER)) {
+		dsb(nsh);
+		isb();
+	}
+}
+
+static inline void __flush_tlb_kernel_page(unsigned long kaddr)
+{
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	kaddr &= PAGE_MASK;
+
+	if (tlb_flag(TLB_WB))
+		dsb(ishst);
+
+	__local_flush_tlb_kernel_page(kaddr);
 	tlb_op(TLB_V7_UIS_PAGE, "c8, c3, 1", kaddr);
 
 	if (tlb_flag(TLB_BARRIER)) {
-		dsb();
+		dsb(ish);
 		isb();
 	}
 }
 
+/*
+ * Branch predictor maintenance is paired with full TLB invalidation, so
+ * there is no need for any barriers here.
+ */
+static inline void __local_flush_bp_all(void)
+{
+	const int zero = 0;
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	if (tlb_flag(TLB_V6_BP))
+		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero));
+}
+
 static inline void local_flush_bp_all(void)
 {
 	const int zero = 0;
 	const unsigned int __tlb_flag = __cpu_tlb_flags;
 
+	__local_flush_bp_all();
 	if (tlb_flag(TLB_V7_UIS_BP))
-		asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero));
-	else if (tlb_flag(TLB_V6_BP))
 		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero));
+}
 
-	if (tlb_flag(TLB_BARRIER))
-		isb();
+static inline void __flush_bp_all(void)
+{
+	const int zero = 0;
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	__local_flush_bp_all();
+	if (tlb_flag(TLB_V7_UIS_BP))
+		asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero));
 }
 
 #include <asm/cputype.h>
@@ -461,7 +578,7 @@ static inline void dummy_flush_tlb_a15_erratum(void)
 	 * Dummy TLBIMVAIS. Using the unmapped address 0 and ASID 0.
 	 */
 	asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (0));
-	dsb();
+	dsb(ish);
 }
 #else
 static inline int erratum_a15_798181(void)
@@ -495,7 +612,7 @@ static inline void flush_pmd_entry(void *pmd)
 	tlb_l2_op(TLB_L2CLEAN_FR, "c15, c9, 1  @ L2 flush_pmd", pmd);
 
 	if (tlb_flag(TLB_WB))
-		dsb();
+		dsb(ishst);
 }
 
 static inline void clean_pmd_entry(void *pmd)
diff --git a/arch/arm/include/asm/types.h b/arch/arm/include/asm/types.h
new file mode 100644
index 0000000..a53cdb8
--- /dev/null
+++ b/arch/arm/include/asm/types.h
@@ -0,0 +1,40 @@
+#ifndef _ASM_TYPES_H
+#define _ASM_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+/*
+ * The C99 types uintXX_t that are usually defined in 'stdint.h' are not as
+ * unambiguous on ARM as you would expect. For the types below, there is a
+ * difference on ARM between GCC built for bare metal ARM, GCC built for glibc
+ * and the kernel itself, which results in build errors if you try to build with
+ * -ffreestanding and include 'stdint.h' (such as when you include 'arm_neon.h'
+ * in order to use NEON intrinsics)
+ *
+ * As the typedefs for these types in 'stdint.h' are based on builtin defines
+ * supplied by GCC, we can tweak these to align with the kernel's idea of those
+ * types, so 'linux/types.h' and 'stdint.h' can be safely included from the same
+ * source file (provided that -ffreestanding is used).
+ *
+ *                    int32_t         uint32_t               uintptr_t
+ * bare metal GCC     long            unsigned long          unsigned int
+ * glibc GCC          int             unsigned int           unsigned int
+ * kernel             int             unsigned int           unsigned long
+ */
+
+#ifdef __INT32_TYPE__
+#undef __INT32_TYPE__
+#define __INT32_TYPE__		int
+#endif
+
+#ifdef __UINT32_TYPE__
+#undef __UINT32_TYPE__
+#define __UINT32_TYPE__	unsigned int
+#endif
+
+#ifdef __UINTPTR_TYPE__
+#undef __UINTPTR_TYPE__
+#define __UINTPTR_TYPE__	unsigned long
+#endif
+
+#endif /* _ASM_TYPES_H */
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 7e1f760..72abdc5 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -19,6 +19,13 @@
 #include <asm/unified.h>
 #include <asm/compiler.h>
 
+#if __LINUX_ARM_ARCH__ < 6
+#include <asm-generic/uaccess-unaligned.h>
+#else
+#define __get_user_unaligned __get_user
+#define __put_user_unaligned __put_user
+#endif
+
 #define VERIFY_READ 0
 #define VERIFY_WRITE 1
 
diff --git a/arch/arm/include/asm/v7m.h b/arch/arm/include/asm/v7m.h
index fa88d09..615781c 100644
--- a/arch/arm/include/asm/v7m.h
+++ b/arch/arm/include/asm/v7m.h
@@ -15,6 +15,10 @@
 
 #define V7M_SCB_VTOR			0x08
 
+#define V7M_SCB_AIRCR			0x0c
+#define V7M_SCB_AIRCR_VECTKEY			(0x05fa << 16)
+#define V7M_SCB_AIRCR_SYSRESETREQ		(1 << 2)
+
 #define V7M_SCB_SCR			0x10
 #define V7M_SCB_SCR_SLEEPDEEP			(1 << 2)
 
@@ -42,3 +46,11 @@
  */
 #define EXC_RET_STACK_MASK			0x00000004
 #define EXC_RET_THREADMODE_PROCESSSTACK		0xfffffffd
+
+#ifndef __ASSEMBLY__
+
+enum reboot_mode;
+
+void armv7m_restart(enum reboot_mode mode, const char *cmd);
+
+#endif /* __ASSEMBLY__ */
diff --git a/arch/arm/include/asm/xor.h b/arch/arm/include/asm/xor.h
index 7604673..4ffb26d 100644
--- a/arch/arm/include/asm/xor.h
+++ b/arch/arm/include/asm/xor.h
@@ -7,7 +7,10 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/hardirq.h>
 #include <asm-generic/xor.h>
+#include <asm/hwcap.h>
+#include <asm/neon.h>
 
 #define __XOR(a1, a2) a1 ^= a2
 
@@ -138,4 +141,74 @@ static struct xor_block_template xor_block_arm4regs = {
 		xor_speed(&xor_block_arm4regs);	\
 		xor_speed(&xor_block_8regs);	\
 		xor_speed(&xor_block_32regs);	\
+		NEON_TEMPLATES;			\
 	} while (0)
+
+#ifdef CONFIG_KERNEL_MODE_NEON
+
+extern struct xor_block_template const xor_block_neon_inner;
+
+static void
+xor_neon_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	if (in_interrupt()) {
+		xor_arm4regs_2(bytes, p1, p2);
+	} else {
+		kernel_neon_begin();
+		xor_block_neon_inner.do_2(bytes, p1, p2);
+		kernel_neon_end();
+	}
+}
+
+static void
+xor_neon_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+		unsigned long *p3)
+{
+	if (in_interrupt()) {
+		xor_arm4regs_3(bytes, p1, p2, p3);
+	} else {
+		kernel_neon_begin();
+		xor_block_neon_inner.do_3(bytes, p1, p2, p3);
+		kernel_neon_end();
+	}
+}
+
+static void
+xor_neon_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+		unsigned long *p3, unsigned long *p4)
+{
+	if (in_interrupt()) {
+		xor_arm4regs_4(bytes, p1, p2, p3, p4);
+	} else {
+		kernel_neon_begin();
+		xor_block_neon_inner.do_4(bytes, p1, p2, p3, p4);
+		kernel_neon_end();
+	}
+}
+
+static void
+xor_neon_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+		unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	if (in_interrupt()) {
+		xor_arm4regs_5(bytes, p1, p2, p3, p4, p5);
+	} else {
+		kernel_neon_begin();
+		xor_block_neon_inner.do_5(bytes, p1, p2, p3, p4, p5);
+		kernel_neon_end();
+	}
+}
+
+static struct xor_block_template xor_block_neon = {
+	.name	= "neon",
+	.do_2	= xor_neon_2,
+	.do_3	= xor_neon_3,
+	.do_4	= xor_neon_4,
+	.do_5	= xor_neon_5
+};
+
+#define NEON_TEMPLATES	\
+	do { if (cpu_has_neon()) xor_speed(&xor_block_neon); } while (0)
+#else
+#define NEON_TEMPLATES
+#endif
diff --git a/arch/arm/include/debug/8250.S b/arch/arm/include/debug/8250.S
new file mode 100644
index 0000000..7a2baf9
--- /dev/null
+++ b/arch/arm/include/debug/8250.S
@@ -0,0 +1,54 @@
+/*
+ * arch/arm/include/debug/8250.S
+ *
+ *  Copyright (C) 1994-2013 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/serial_reg.h>
+
+		.macro	addruart, rp, rv, tmp
+		ldr	\rp, =CONFIG_DEBUG_UART_PHYS
+		ldr	\rv, =CONFIG_DEBUG_UART_VIRT
+		.endm
+
+#ifdef CONFIG_DEBUG_UART_8250_WORD
+		.macro	store, rd, rx:vararg
+		str	\rd, \rx
+		.endm
+
+		.macro	load, rd, rx:vararg
+		ldr	\rd, \rx
+		.endm
+#else
+		.macro	store, rd, rx:vararg
+		strb	\rd, \rx
+		.endm
+
+		.macro	load, rd, rx:vararg
+		ldrb	\rd, \rx
+		.endm
+#endif
+
+#define UART_SHIFT CONFIG_DEBUG_UART_8250_SHIFT
+
+		.macro	senduart,rd,rx
+		store	\rd, [\rx, #UART_TX << UART_SHIFT]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		load	\rd, [\rx, #UART_LSR << UART_SHIFT]
+		and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+		teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
+		bne	1002b
+		.endm
+
+		.macro	waituart,rd,rx
+#ifdef CONFIG_DEBUG_UART_8250_FLOW_CONTROL
+1001:		load	\rd, [\rx, #UART_MSR << UART_SHIFT]
+		tst	\rd, #UART_MSR_CTS
+		beq	1001b
+#endif
+		.endm
diff --git a/arch/arm/include/debug/8250_32.S b/arch/arm/include/debug/8250_32.S
deleted file mode 100644
index 8db01ee..0000000
--- a/arch/arm/include/debug/8250_32.S
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit
- * accesses to the 8250.
- */
-
-#include <linux/serial_reg.h>
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #UART_TX << UART_SHIFT]
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #UART_LSR << UART_SHIFT]
-		and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
-		teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
-		bne	1002b
-		.endm
-
-		/* The UART's don't have any flow control IO's wired up. */
-		.macro	waituart,rd,rx
-		.endm
diff --git a/arch/arm/include/debug/bcm2835.S b/arch/arm/include/debug/bcm2835.S
deleted file mode 100644
index aed9199..0000000
--- a/arch/arm/include/debug/bcm2835.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Debugging macro include header
- *
- * Copyright (C) 2010 Broadcom
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#define BCM2835_DEBUG_PHYS 0x20201000
-#define BCM2835_DEBUG_VIRT 0xf0201000
-
-	.macro	addruart, rp, rv, tmp
-	ldr	\rp, =BCM2835_DEBUG_PHYS
-	ldr	\rv, =BCM2835_DEBUG_VIRT
-	.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/include/debug/cns3xxx.S b/arch/arm/include/debug/cns3xxx.S
deleted file mode 100644
index d04c150..0000000
--- a/arch/arm/include/debug/cns3xxx.S
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Debugging macro include header
- *
- * Copyright 1994-1999 Russell King
- * Copyright 2008 Cavium Networks
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-		.macro	addruart,rp,rv,tmp
-		mov	\rp, #0x00009000
-		orr	\rv, \rp, #0xf0000000	@ virtual base
-		orr	\rp, \rp, #0x10000000
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/include/debug/highbank.S b/arch/arm/include/debug/highbank.S
deleted file mode 100644
index 8cad432..0000000
--- a/arch/arm/include/debug/highbank.S
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-		.macro	addruart,rp,rv,tmp
-		ldr	\rv, =0xfee36000
-		ldr	\rp, =0xfff36000
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/include/debug/keystone.S b/arch/arm/include/debug/keystone.S
deleted file mode 100644
index 9aef9ba..0000000
--- a/arch/arm/include/debug/keystone.S
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Early serial debug output macro for Keystone SOCs
- *
- * Copyright 2013 Texas Instruments, Inc.
- *	Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * Based on RMKs low level debug code.
- *  Copyright (C) 1994-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/serial_reg.h>
-
-#define UART_SHIFT 2
-#if defined(CONFIG_DEBUG_KEYSTONE_UART0)
-#define UART_PHYS		0x02530c00
-#define UART_VIRT		0xfeb30c00
-#elif defined(CONFIG_DEBUG_KEYSTONE_UART1)
-#define UART_PHYS		0x02531000
-#define UART_VIRT		0xfeb31000
-#endif
-
-	.macro	addruart, rp, rv, tmp
-	ldr	\rv, =UART_VIRT			@ physical base address
-	ldr	\rp, =UART_PHYS			@ virtual base address
-	.endm
-
-	.macro	senduart,rd,rx
-	str	\rd, [\rx, #UART_TX << UART_SHIFT]
-	.endm
-
-	.macro	busyuart,rd,rx
-1002:	ldr	\rd, [\rx, #UART_LSR << UART_SHIFT]
-	and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
-	teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
-	bne	1002b
-	.endm
-
-	.macro	waituart,rd,rx
-	.endm
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/include/debug/msm.S
index 0e05f88..9166e1b 100644
--- a/arch/arm/mach-msm/include/mach/debug-macro.S
+++ b/arch/arm/include/debug/msm.S
@@ -15,8 +15,36 @@
  *
  */
 
-#include <mach/hardware.h>
-#include <mach/msm_iomap.h>
+#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_QSD8X50)
+#define MSM_UART1_PHYS        0xA9A00000
+#define MSM_UART2_PHYS        0xA9B00000
+#define MSM_UART3_PHYS        0xA9C00000
+#elif defined(CONFIG_ARCH_MSM7X30)
+#define MSM_UART1_PHYS        0xACA00000
+#define MSM_UART2_PHYS        0xACB00000
+#define MSM_UART3_PHYS        0xACC00000
+#endif
+
+#if defined(CONFIG_DEBUG_MSM_UART1)
+#define MSM_DEBUG_UART_BASE	0xE1000000
+#define MSM_DEBUG_UART_PHYS	MSM_UART1_PHYS
+#elif defined(CONFIG_DEBUG_MSM_UART2)
+#define MSM_DEBUG_UART_BASE	0xE1000000
+#define MSM_DEBUG_UART_PHYS	MSM_UART2_PHYS
+#elif defined(CONFIG_DEBUG_MSM_UART3)
+#define MSM_DEBUG_UART_BASE	0xE1000000
+#define MSM_DEBUG_UART_PHYS	MSM_UART3_PHYS
+#endif
+
+#ifdef CONFIG_DEBUG_MSM8660_UART
+#define MSM_DEBUG_UART_BASE	0xF0040000
+#define MSM_DEBUG_UART_PHYS	0x19C40000
+#endif
+
+#ifdef CONFIG_DEBUG_MSM8960_UART
+#define MSM_DEBUG_UART_BASE	0xF0040000
+#define MSM_DEBUG_UART_PHYS	0x16440000
+#endif
 
 	.macro	addruart, rp, rv, tmp
 #ifdef MSM_DEBUG_UART_PHYS
diff --git a/arch/arm/include/debug/mvebu.S b/arch/arm/include/debug/mvebu.S
deleted file mode 100644
index 6517311..0000000
--- a/arch/arm/include/debug/mvebu.S
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Early serial output macro for Marvell  SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory Clement <gregory.clement@free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_DEBUG_MVEBU_UART_ALTERNATE
-#define ARMADA_370_XP_REGS_PHYS_BASE	0xf1000000
-#else
-#define ARMADA_370_XP_REGS_PHYS_BASE	0xd0000000
-#endif
-
-#define ARMADA_370_XP_REGS_VIRT_BASE	0xfec00000
-
-	.macro	addruart, rp, rv, tmp
-	ldr	\rp, =ARMADA_370_XP_REGS_PHYS_BASE
-	ldr	\rv, =ARMADA_370_XP_REGS_VIRT_BASE
-	orr	\rp, \rp, #0x00012000
-	orr	\rv, \rv, #0x00012000
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/include/debug/mxs.S b/arch/arm/include/debug/mxs.S
deleted file mode 100644
index d869515..0000000
--- a/arch/arm/include/debug/mxs.S
+++ /dev/null
@@ -1,27 +0,0 @@
-/* arch/arm/mach-mxs/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifdef CONFIG_DEBUG_IMX23_UART
-#define UART_PADDR	0x80070000
-#elif defined (CONFIG_DEBUG_IMX28_UART)
-#define UART_PADDR	0x80074000
-#endif
-
-#define UART_VADDR	0xfe100000
-
-		.macro	addruart, rp, rv, tmp
-		ldr	\rp, =UART_PADDR	@ physical
-		ldr	\rv, =UART_VADDR	@ virtual
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/include/debug/nomadik.S b/arch/arm/include/debug/nomadik.S
deleted file mode 100644
index 7354179..0000000
--- a/arch/arm/include/debug/nomadik.S
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0x00100000
-		add	\rp, \rp, #0x000fb000
-		add	\rv, \rp, #0xf0000000	@ virtual base
-		add	\rp, \rp, #0x10000000	@ physical base address
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/include/debug/nspire.S b/arch/arm/include/debug/nspire.S
deleted file mode 100644
index 886fd27..0000000
--- a/arch/arm/include/debug/nspire.S
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *	linux/arch/arm/include/debug/nspire.S
- *
- *	Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- */
-
-#define NSPIRE_EARLY_UART_PHYS_BASE	   0x90020000
-#define NSPIRE_EARLY_UART_VIRT_BASE	   0xfee20000
-
-.macro	addruart, rp, rv, tmp
-	ldr \rp, =(NSPIRE_EARLY_UART_PHYS_BASE)		@ physical base address
-	ldr \rv, =(NSPIRE_EARLY_UART_VIRT_BASE)		@ virtual base address
-.endm
-
-
-#ifdef CONFIG_DEBUG_NSPIRE_CX_UART
-#include <asm/hardware/debug-pl01x.S>
-#endif
-
-#ifdef CONFIG_DEBUG_NSPIRE_CLASSIC_UART
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
-#endif
diff --git a/arch/arm/include/debug/picoxcell.S b/arch/arm/include/debug/picoxcell.S
deleted file mode 100644
index bc1f07c4..0000000
--- a/arch/arm/include/debug/picoxcell.S
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#define UART_SHIFT 2
-#define PICOXCELL_UART1_BASE		0x80230000
-#define PHYS_TO_IO(x)			(((x) & 0x00ffffff) | 0xfe000000)
-
-		.macro	addruart, rp, rv, tmp
-		ldr	\rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE)
-		ldr	\rp, =PICOXCELL_UART1_BASE
-		.endm
-
-#include "8250_32.S"
diff --git a/arch/arm/include/asm/hardware/debug-pl01x.S b/arch/arm/include/debug/pl01x.S
index f9fd083..37c6895b 100644
--- a/arch/arm/include/asm/hardware/debug-pl01x.S
+++ b/arch/arm/include/debug/pl01x.S
@@ -1,4 +1,4 @@
-/* arch/arm/include/asm/hardware/debug-pl01x.S
+/* arch/arm/include/debug/pl01x.S
  *
  * Debugging macro include header
  *
@@ -12,6 +12,13 @@
 */
 #include <linux/amba/serial.h>
 
+#ifdef CONFIG_DEBUG_UART_PHYS
+		.macro	addruart, rp, rv, tmp
+		ldr	\rp, =CONFIG_DEBUG_UART_PHYS
+		ldr	\rv, =CONFIG_DEBUG_UART_VIRT
+		.endm
+#endif
+
 		.macro	senduart,rd,rx
 		strb	\rd, [\rx, #UART01x_DR]
 		.endm
diff --git a/arch/arm/include/debug/pxa.S b/arch/arm/include/debug/pxa.S
deleted file mode 100644
index e1e795a..0000000
--- a/arch/arm/include/debug/pxa.S
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Early serial output macro for Marvell PXA/MMP SoC
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * Copyright (C) 2013 Haojian Zhuang
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#if defined(CONFIG_DEBUG_PXA_UART1)
-#define PXA_UART_REG_PHYS_BASE	0x40100000
-#define PXA_UART_REG_VIRT_BASE	0xf2100000
-#elif defined(CONFIG_DEBUG_MMP_UART2)
-#define PXA_UART_REG_PHYS_BASE	0xd4017000
-#define PXA_UART_REG_VIRT_BASE	0xfe017000
-#elif defined(CONFIG_DEBUG_MMP_UART3)
-#define PXA_UART_REG_PHYS_BASE	0xd4018000
-#define PXA_UART_REG_VIRT_BASE	0xfe018000
-#else
-#error "Select uart for DEBUG_LL"
-#endif
-
-	.macro	addruart, rp, rv, tmp
-	ldr	\rp, =PXA_UART_REG_PHYS_BASE
-	ldr	\rv, =PXA_UART_REG_VIRT_BASE
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/include/debug/rockchip.S b/arch/arm/include/debug/rockchip.S
deleted file mode 100644
index cfd883e..0000000
--- a/arch/arm/include/debug/rockchip.S
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Early serial output macro for Rockchip SoCs
- *
- * Copyright (C) 2012 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#if defined(CONFIG_DEBUG_RK29_UART0)
-#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x20060000
-#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfed60000
-#elif defined(CONFIG_DEBUG_RK29_UART1)
-#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x20064000
-#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfed64000
-#elif defined(CONFIG_DEBUG_RK29_UART2)
-#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x20068000
-#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfed68000
-#elif defined(CONFIG_DEBUG_RK3X_UART0)
-#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x10124000
-#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfeb24000
-#elif defined(CONFIG_DEBUG_RK3X_UART1)
-#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x10126000
-#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfeb26000
-#elif defined(CONFIG_DEBUG_RK3X_UART2)
-#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x20064000
-#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfed64000
-#elif defined(CONFIG_DEBUG_RK3X_UART3)
-#define ROCKCHIP_UART_DEBUG_PHYS_BASE 0x20068000
-#define ROCKCHIP_UART_DEBUG_VIRT_BASE 0xfed68000
-#endif
-
-	.macro	addruart, rp, rv, tmp
-	ldr	\rp, =ROCKCHIP_UART_DEBUG_PHYS_BASE
-	ldr	\rv, =ROCKCHIP_UART_DEBUG_VIRT_BASE
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/include/debug/socfpga.S b/arch/arm/include/debug/socfpga.S
deleted file mode 100644
index 966b2f9..0000000
--- a/arch/arm/include/debug/socfpga.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define UART_SHIFT 2
-#define DEBUG_LL_UART_OFFSET	0x00002000
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #DEBUG_LL_UART_OFFSET
-		orr	\rp, \rp, #0x00c00000
-		orr	\rv, \rp, #0xfe000000	@ virtual base
-		orr	\rp, \rp, #0xff000000	@ physical base
-		.endm
-
-#include "8250_32.S"
-
diff --git a/arch/arm/include/debug/sunxi.S b/arch/arm/include/debug/sunxi.S
deleted file mode 100644
index 04eb56d..0000000
--- a/arch/arm/include/debug/sunxi.S
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Early serial output macro for Allwinner A1X SoCs
- *
- * Copyright (C) 2012 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#if defined(CONFIG_DEBUG_SUNXI_UART0)
-#define SUNXI_UART_DEBUG_PHYS_BASE 0x01c28000
-#define SUNXI_UART_DEBUG_VIRT_BASE 0xf1c28000
-#elif defined(CONFIG_DEBUG_SUNXI_UART1)
-#define SUNXI_UART_DEBUG_PHYS_BASE 0x01c28400
-#define SUNXI_UART_DEBUG_VIRT_BASE 0xf1c28400
-#endif
-
-	.macro	addruart, rp, rv, tmp
-	ldr	\rp, =SUNXI_UART_DEBUG_PHYS_BASE
-	ldr	\rv, =SUNXI_UART_DEBUG_VIRT_BASE
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/include/debug/tegra.S b/arch/arm/include/debug/tegra.S
index 883d7c2..be6a720 100644
--- a/arch/arm/include/debug/tegra.S
+++ b/arch/arm/include/debug/tegra.S
@@ -221,3 +221,32 @@
 1002:
 #endif
 		.endm
+
+/*
+ * Storage for the state maintained by the macros above.
+ *
+ * In the kernel proper, this data is located in arch/arm/mach-tegra/common.c.
+ * That's because this header is included from multiple files, and we only
+ * want a single copy of the data. In particular, the UART probing code above
+ * assumes it's running using physical addresses. This is true when this file
+ * is included from head.o, but not when included from debug.o. So we need
+ * to share the probe results between the two copies, rather than having
+ * to re-run the probing again later.
+ *
+ * In the decompressor, we put the symbol/storage right here, since common.c
+ * isn't included in the decompressor build. This symbol gets put in .text
+ * even though it's really data, since .data is discarded from the
+ * decompressor. Luckily, .text is writeable in the decompressor, unless
+ * CONFIG_ZBOOT_ROM. That dependency is handled in arch/arm/Kconfig.debug.
+ */
+#if defined(ZIMAGE)
+tegra_uart_config:
+	/* Debug UART initialization required */
+	.word 1
+	/* Debug UART physical address */
+	.word 0
+	/* Debug UART virtual address */
+	.word 0
+	/* Scratch space for debug macro */
+	.word 0
+#endif
diff --git a/arch/arm/include/debug/u300.S b/arch/arm/include/debug/u300.S
deleted file mode 100644
index 6f04f08..0000000
--- a/arch/arm/include/debug/u300.S
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (C) 2006-2013 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Debugging macro include header.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#define U300_SLOW_PER_PHYS_BASE		0xc0010000
-#define U300_SLOW_PER_VIRT_BASE		0xff000000
-
-	.macro	addruart, rp, rv, tmp
-	/* If we move the address using MMU, use this. */
-	ldr	\rp,	  = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
-	ldr	\rv,	  = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address
-	orr	\rp, \rp, #0x00003000
-	orr	\rv, \rv, #0x00003000
-	.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/include/debug/ux500.S b/arch/arm/include/debug/ux500.S
index fbd24be..aa7f63a 100644
--- a/arch/arm/include/debug/ux500.S
+++ b/arch/arm/include/debug/ux500.S
@@ -45,4 +45,4 @@
 	ldr	\rv, =UART_VIRT_BASE		@ yes, virtual address
 	.endm
 
-#include <asm/hardware/debug-pl01x.S>
+#include <debug/pl01x.S>
diff --git a/arch/arm/include/debug/vexpress.S b/arch/arm/include/debug/vexpress.S
index acafb22..524acd5 100644
--- a/arch/arm/include/debug/vexpress.S
+++ b/arch/arm/include/debug/vexpress.S
@@ -47,51 +47,5 @@
 
 		.endm
 
-#include <asm/hardware/debug-pl01x.S>
-
-#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_CA9)
-
-		.macro	addruart,rp,rv,tmp
-		mov	\rp, #DEBUG_LL_UART_OFFSET
-		orr	\rv, \rp, #DEBUG_LL_VIRT_BASE
-		orr	\rp, \rp, #DEBUG_LL_PHYS_BASE
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
-
-#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_RS1)
-
-		.macro	addruart,rp,rv,tmp
-		mov	\rp, #DEBUG_LL_UART_OFFSET_RS1
-		orr	\rv, \rp, #DEBUG_LL_VIRT_BASE
-		orr	\rp, \rp, #DEBUG_LL_PHYS_BASE_RS1
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
-
-#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_CRX)
-
-		.macro	addruart,rp,tmp,tmp2
-		ldr	\rp, =DEBUG_LL_UART_PHYS_CRX
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
-
-#else /* CONFIG_DEBUG_LL_UART_NONE */
-
-		.macro	addruart, rp, rv, tmp
-		/* Safe dummy values */
-		mov	\rp, #0
-		mov	\rv, #DEBUG_LL_VIRT_BASE
-		.endm
-
-		.macro	senduart,rd,rx
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
-
-		.macro	busyuart,rd,rx
-		.endm
-
+#include <debug/pl01x.S>
 #endif
diff --git a/arch/arm/include/debug/vf.S b/arch/arm/include/debug/vf.S
new file mode 100644
index 0000000..ba12cc4
--- /dev/null
+++ b/arch/arm/include/debug/vf.S
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+	.macro	addruart, rp, rv, tmp
+	ldr	\rp, =0x40028000	@ physical
+	ldr	\rv, =0xfe028000	@ virtual
+	.endm
+
+	.macro	senduart, rd, rx
+	strb	\rd, [\rx, #0x7]	@ Data Register
+	.endm
+
+	.macro	busyuart, rd, rx
+1001:	ldrb	\rd, [\rx, #0x4]	@ Status Register 1
+	tst	\rd, #1 << 6		@ TC
+	beq	1001b			@ wait until transmit done
+	.endm
+
+	.macro	waituart,rd,rx
+	.endm
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 86d10dd..5140df5f 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -24,7 +24,7 @@ obj-$(CONFIG_ATAGS_PROC)	+= atags_proc.o
 obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += atags_compat.o
 
 ifeq ($(CONFIG_CPU_V7M),y)
-obj-y		+= entry-v7m.o
+obj-y		+= entry-v7m.o v7m.o
 else
 obj-y		+= entry-armv.o
 endif
diff --git a/arch/arm/kernel/atags.h b/arch/arm/kernel/atags.h
index 9edc969..ec4164d 100644
--- a/arch/arm/kernel/atags.h
+++ b/arch/arm/kernel/atags.h
@@ -7,9 +7,10 @@ static inline void save_atags(struct tag *tags) { }
 void convert_to_tag_list(struct tag *tags);
 
 #ifdef CONFIG_ATAGS
-struct machine_desc *setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr);
+const struct machine_desc *setup_machine_tags(phys_addr_t __atags_pointer,
+	unsigned int machine_nr);
 #else
-static inline struct machine_desc *
+static inline const struct machine_desc *
 setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr)
 {
 	early_print("no ATAGS support: can't continue\n");
diff --git a/arch/arm/kernel/atags_parse.c b/arch/arm/kernel/atags_parse.c
index 14512e6..8c14de8 100644
--- a/arch/arm/kernel/atags_parse.c
+++ b/arch/arm/kernel/atags_parse.c
@@ -178,11 +178,11 @@ static void __init squash_mem_tags(struct tag *tag)
 			tag->hdr.tag = ATAG_NONE;
 }
 
-struct machine_desc * __init setup_machine_tags(phys_addr_t __atags_pointer,
-						unsigned int machine_nr)
+const struct machine_desc * __init
+setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr)
 {
 	struct tag *tags = (struct tag *)&default_tags;
-	struct machine_desc *mdesc = NULL, *p;
+	const struct machine_desc *mdesc = NULL, *p;
 	char *from = default_command_line;
 
 	default_tags.mem.start = PHYS_OFFSET;
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index 261fcc8..317da88 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -363,6 +363,20 @@ void pcibios_fixup_bus(struct pci_bus *bus)
 }
 EXPORT_SYMBOL(pcibios_fixup_bus);
 
+void pcibios_add_bus(struct pci_bus *bus)
+{
+	struct pci_sys_data *sys = bus->sysdata;
+	if (sys->add_bus)
+		sys->add_bus(bus);
+}
+
+void pcibios_remove_bus(struct pci_bus *bus)
+{
+	struct pci_sys_data *sys = bus->sysdata;
+	if (sys->remove_bus)
+		sys->remove_bus(bus);
+}
+
 /*
  * Swizzle the device pin each time we cross a bridge.  If a platform does
  * not provide a swizzle function, we perform the standard PCI swizzling.
@@ -464,6 +478,8 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw,
 		sys->swizzle = hw->swizzle;
 		sys->map_irq = hw->map_irq;
 		sys->align_resource = hw->align_resource;
+		sys->add_bus = hw->add_bus;
+		sys->remove_bus = hw->remove_bus;
 		INIT_LIST_HEAD(&sys->resources);
 
 		if (hw->private_data)
@@ -525,11 +541,6 @@ void pci_common_init_dev(struct device *parent, struct hw_pci *hw)
 			 * Assign resources.
 			 */
 			pci_bus_assign_resources(bus);
-
-			/*
-			 * Enable bridges
-			 */
-			pci_enable_bridges(bus);
 		}
 
 		/*
diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c
index 5859c8b..f35906b 100644
--- a/arch/arm/kernel/devtree.c
+++ b/arch/arm/kernel/devtree.c
@@ -169,6 +169,11 @@ void __init arm_dt_init_cpu_maps(void)
 	}
 }
 
+bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
+{
+	return (phys_id & MPIDR_HWID_BITMASK) == cpu_logical_map(cpu);
+}
+
 /**
  * setup_machine_fdt - Machine setup when an dtb was passed to the kernel
  * @dt_phys: physical address of dt blob
@@ -176,10 +181,10 @@ void __init arm_dt_init_cpu_maps(void)
  * If a dtb was passed to the kernel in r2, then use it to choose the
  * correct machine_desc and to setup the system.
  */
-struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
+const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
 {
 	struct boot_param_header *devtree;
-	struct machine_desc *mdesc, *mdesc_best = NULL;
+	const struct machine_desc *mdesc, *mdesc_best = NULL;
 	unsigned int score, mdesc_score = ~1;
 	unsigned long dt_root;
 	const char *model;
@@ -188,7 +193,7 @@ struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
 	DT_MACHINE_START(GENERIC_DT, "Generic DT based system")
 	MACHINE_END
 
-	mdesc_best = (struct machine_desc *)&__mach_desc_GENERIC_DT;
+	mdesc_best = &__mach_desc_GENERIC_DT;
 #endif
 
 	if (!dt_phys)
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 94104bf..bc6bd96 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -442,10 +442,10 @@ local_restart:
 	ldrcc	pc, [tbl, scno, lsl #2]		@ call sys_* routine
 
 	add	r1, sp, #S_OFF
-2:	mov	why, #0				@ no longer a real syscall
-	cmp	scno, #(__ARM_NR_BASE - __NR_SYSCALL_BASE)
+2:	cmp	scno, #(__ARM_NR_BASE - __NR_SYSCALL_BASE)
 	eor	r0, scno, #__NR_SYSCALL_BASE	@ put OS number back
-	bcs	arm_syscall	
+	bcs	arm_syscall
+	mov	why, #0				@ no longer a real syscall
 	b	sys_ni_syscall			@ not private func
 
 #if defined(CONFIG_OABI_COMPAT) || !defined(CONFIG_AEABI)
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index de23a9b..39f89fb 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -329,10 +329,10 @@
 #ifdef CONFIG_CONTEXT_TRACKING
 	.if	\save
 	stmdb   sp!, {r0-r3, ip, lr}
-	bl	user_exit
+	bl	context_tracking_user_exit
 	ldmia	sp!, {r0-r3, ip, lr}
 	.else
-	bl	user_exit
+	bl	context_tracking_user_exit
 	.endif
 #endif
 	.endm
@@ -341,10 +341,10 @@
 #ifdef CONFIG_CONTEXT_TRACKING
 	.if	\save
 	stmdb   sp!, {r0-r3, ip, lr}
-	bl	user_enter
+	bl	context_tracking_user_enter
 	ldmia	sp!, {r0-r3, ip, lr}
 	.else
-	bl	user_enter
+	bl	context_tracking_user_enter
 	.endif
 #endif
 	.endm
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 2c7cc1e..476de57 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -487,7 +487,26 @@ __fixup_smp:
 	mrc	p15, 0, r0, c0, c0, 5	@ read MPIDR
 	and	r0, r0, #0xc0000000	@ multiprocessing extensions and
 	teq	r0, #0x80000000		@ not part of a uniprocessor system?
-	moveq	pc, lr			@ yes, assume SMP
+	bne    __fixup_smp_on_up	@ no, assume UP
+
+	@ Core indicates it is SMP. Check for Aegis SOC where a single
+	@ Cortex-A9 CPU is present but SMP operations fault.
+	mov	r4, #0x41000000
+	orr	r4, r4, #0x0000c000
+	orr	r4, r4, #0x00000090
+	teq	r3, r4			@ Check for ARM Cortex-A9
+	movne	pc, lr			@ Not ARM Cortex-A9,
+
+	@ If a future SoC *does* use 0x0 as the PERIPH_BASE, then the
+	@ below address check will need to be #ifdef'd or equivalent
+	@ for the Aegis platform.
+	mrc	p15, 4, r0, c15, c0	@ get SCU base address
+	teq	r0, #0x0		@ '0' on actual UP A9 hardware
+	beq	__fixup_smp_on_up	@ So its an A9 UP
+	ldr	r0, [r0, #4]		@ read SCU Config
+	and	r0, r0, #0x3		@ number of CPUs
+	teq	r0, #0x0		@ is 1?
+	movne	pc, lr
 
 __fixup_smp_on_up:
 	adr	r0, 1f
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index 85c3fb6..084dc88 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -292,12 +292,20 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
 			maps[ARM_SEC_CORE].unw_sec = s;
 		else if (strcmp(".ARM.exidx.exit.text", secname) == 0)
 			maps[ARM_SEC_EXIT].unw_sec = s;
+		else if (strcmp(".ARM.exidx.text.unlikely", secname) == 0)
+			maps[ARM_SEC_UNLIKELY].unw_sec = s;
+		else if (strcmp(".ARM.exidx.text.hot", secname) == 0)
+			maps[ARM_SEC_HOT].unw_sec = s;
 		else if (strcmp(".init.text", secname) == 0)
 			maps[ARM_SEC_INIT].txt_sec = s;
 		else if (strcmp(".text", secname) == 0)
 			maps[ARM_SEC_CORE].txt_sec = s;
 		else if (strcmp(".exit.text", secname) == 0)
 			maps[ARM_SEC_EXIT].txt_sec = s;
+		else if (strcmp(".text.unlikely", secname) == 0)
+			maps[ARM_SEC_UNLIKELY].txt_sec = s;
+		else if (strcmp(".text.hot", secname) == 0)
+			maps[ARM_SEC_HOT].txt_sec = s;
 	}
 
 	for (i = 0; i < ARM_SEC_MAX; i++)
diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c
index aebe0e9..8d6147b 100644
--- a/arch/arm/kernel/perf_event_cpu.c
+++ b/arch/arm/kernel/perf_event_cpu.c
@@ -118,7 +118,8 @@ static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler)
 			continue;
 		}
 
-		err = request_irq(irq, handler, IRQF_NOBALANCING, "arm-pmu",
+		err = request_irq(irq, handler,
+				  IRQF_NOBALANCING | IRQF_NO_THREAD, "arm-pmu",
 				  cpu_pmu);
 		if (err) {
 			pr_err("unable to request IRQ%d for ARM PMU counters\n",
diff --git a/arch/arm/kernel/psci_smp.c b/arch/arm/kernel/psci_smp.c
index 70ded3f..570a48c 100644
--- a/arch/arm/kernel/psci_smp.c
+++ b/arch/arm/kernel/psci_smp.c
@@ -14,7 +14,6 @@
  */
 
 #include <linux/init.h>
-#include <linux/irqchip/arm-gic.h>
 #include <linux/smp.h>
 #include <linux/of.h>
 
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index afc2489..0e1e2b3 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -72,10 +72,10 @@ static int __init fpe_setup(char *line)
 __setup("fpe=", fpe_setup);
 #endif
 
-extern void paging_init(struct machine_desc *desc);
+extern void paging_init(const struct machine_desc *desc);
 extern void sanity_check_meminfo(void);
 extern enum reboot_mode reboot_mode;
-extern void setup_dma_zone(struct machine_desc *desc);
+extern void setup_dma_zone(const struct machine_desc *desc);
 
 unsigned int processor_id;
 EXPORT_SYMBOL(processor_id);
@@ -139,7 +139,7 @@ EXPORT_SYMBOL(elf_platform);
 static const char *cpu_name;
 static const char *machine_name;
 static char __initdata cmd_line[COMMAND_LINE_SIZE];
-struct machine_desc *machine_desc __initdata;
+const struct machine_desc *machine_desc __initdata;
 
 static union { char c[4]; unsigned long l; } endian_test __initdata = { { 'l', '?', '?', 'b' } };
 #define ENDIANNESS ((char)endian_test.l)
@@ -607,7 +607,7 @@ static void __init setup_processor(void)
 
 void __init dump_machine_table(void)
 {
-	struct machine_desc *p;
+	const struct machine_desc *p;
 
 	early_print("Available machine support:\n\nID (hex)\tNAME\n");
 	for_each_machine_desc(p)
@@ -694,7 +694,7 @@ static int __init early_mem(char *p)
 }
 early_param("mem", early_mem);
 
-static void __init request_standard_resources(struct machine_desc *mdesc)
+static void __init request_standard_resources(const struct machine_desc *mdesc)
 {
 	struct memblock_region *region;
 	struct resource *res;
@@ -852,7 +852,7 @@ void __init hyp_mode_check(void)
 
 void __init setup_arch(char **cmdline_p)
 {
-	struct machine_desc *mdesc;
+	const struct machine_desc *mdesc;
 
 	setup_processor();
 	mdesc = setup_machine_fdt(__atags_pointer);
@@ -994,15 +994,6 @@ static int c_show(struct seq_file *m, void *v)
 		seq_printf(m, "model name\t: %s rev %d (%s)\n",
 			   cpu_name, cpuid & 15, elf_platform);
 
-#if defined(CONFIG_SMP)
-		seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
-			   per_cpu(cpu_data, i).loops_per_jiffy / (500000UL/HZ),
-			   (per_cpu(cpu_data, i).loops_per_jiffy / (5000UL/HZ)) % 100);
-#else
-		seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
-			   loops_per_jiffy / (500000/HZ),
-			   (loops_per_jiffy / (5000/HZ)) % 100);
-#endif
 		/* dump out the processor features */
 		seq_puts(m, "Features\t: ");
 
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 2dc19349e..72024ea 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -41,7 +41,6 @@
 #include <asm/sections.h>
 #include <asm/tlbflush.h>
 #include <asm/ptrace.h>
-#include <asm/localtimer.h>
 #include <asm/smp_plat.h>
 #include <asm/virt.h>
 #include <asm/mach/arch.h>
@@ -156,8 +155,6 @@ int platform_can_cpu_hotplug(void)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-static void percpu_timer_stop(void);
-
 static int platform_cpu_kill(unsigned int cpu)
 {
 	if (smp_ops.cpu_kill)
@@ -201,11 +198,6 @@ int __cpu_disable(void)
 	migrate_irqs();
 
 	/*
-	 * Stop the local timer for this CPU.
-	 */
-	percpu_timer_stop();
-
-	/*
 	 * Flush user cache and TLB mappings, and then remove this CPU
 	 * from the vm mask set of all processes.
 	 *
@@ -326,8 +318,6 @@ static void smp_store_cpu_info(unsigned int cpuid)
 	store_cpu_topology(cpuid);
 }
 
-static void percpu_timer_setup(void);
-
 /*
  * This is the secondary CPU boot entry.  We're using this CPUs
  * idle thread stack, but a set of temporary page tables.
@@ -382,11 +372,6 @@ asmlinkage void secondary_start_kernel(void)
 	set_cpu_online(cpu, true);
 	complete(&cpu_running);
 
-	/*
-	 * Setup the percpu timer for this CPU.
-	 */
-	percpu_timer_setup();
-
 	local_irq_enable();
 	local_fiq_enable();
 
@@ -398,17 +383,8 @@ asmlinkage void secondary_start_kernel(void)
 
 void __init smp_cpus_done(unsigned int max_cpus)
 {
-	int cpu;
-	unsigned long bogosum = 0;
-
-	for_each_online_cpu(cpu)
-		bogosum += per_cpu(cpu_data, cpu).loops_per_jiffy;
-
-	printk(KERN_INFO "SMP: Total of %d processors activated "
-	       "(%lu.%02lu BogoMIPS).\n",
-	       num_online_cpus(),
-	       bogosum / (500000/HZ),
-	       (bogosum / (5000/HZ)) % 100);
+	printk(KERN_INFO "SMP: Total of %d processors activated.\n",
+	       num_online_cpus());
 
 	hyp_mode_check();
 }
@@ -433,12 +409,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 		max_cpus = ncores;
 	if (ncores > 1 && max_cpus) {
 		/*
-		 * Enable the local timer or broadcast device for the
-		 * boot CPU, but only if we have more than one CPU.
-		 */
-		percpu_timer_setup();
-
-		/*
 		 * Initialise the present map, which describes the set of CPUs
 		 * actually populated at the present time. A platform should
 		 * re-initialize the map in the platforms smp_prepare_cpus()
@@ -514,11 +484,6 @@ u64 smp_irq_stat_cpu(unsigned int cpu)
 	return sum;
 }
 
-/*
- * Timer (local or broadcast) support
- */
-static DEFINE_PER_CPU(struct clock_event_device, percpu_clockevent);
-
 #ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
 void tick_broadcast(const struct cpumask *mask)
 {
@@ -526,67 +491,6 @@ void tick_broadcast(const struct cpumask *mask)
 }
 #endif
 
-static void broadcast_timer_set_mode(enum clock_event_mode mode,
-	struct clock_event_device *evt)
-{
-}
-
-static void broadcast_timer_setup(struct clock_event_device *evt)
-{
-	evt->name	= "dummy_timer";
-	evt->features	= CLOCK_EVT_FEAT_ONESHOT |
-			  CLOCK_EVT_FEAT_PERIODIC |
-			  CLOCK_EVT_FEAT_DUMMY;
-	evt->rating	= 100;
-	evt->mult	= 1;
-	evt->set_mode	= broadcast_timer_set_mode;
-
-	clockevents_register_device(evt);
-}
-
-static struct local_timer_ops *lt_ops;
-
-#ifdef CONFIG_LOCAL_TIMERS
-int local_timer_register(struct local_timer_ops *ops)
-{
-	if (!is_smp() || !setup_max_cpus)
-		return -ENXIO;
-
-	if (lt_ops)
-		return -EBUSY;
-
-	lt_ops = ops;
-	return 0;
-}
-#endif
-
-static void percpu_timer_setup(void)
-{
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
-
-	evt->cpumask = cpumask_of(cpu);
-
-	if (!lt_ops || lt_ops->setup(evt))
-		broadcast_timer_setup(evt);
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-/*
- * The generic clock events code purposely does not stop the local timer
- * on CPU_DEAD/CPU_DEAD_FROZEN hotplug events, so we have to do it
- * manually here.
- */
-static void percpu_timer_stop(void)
-{
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
-
-	if (lt_ops)
-		lt_ops->stop(evt);
-}
-#endif
-
 static DEFINE_RAW_SPINLOCK(stop_lock);
 
 /*
diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c
index c2edfff..83ccca3 100644
--- a/arch/arm/kernel/smp_tlb.c
+++ b/arch/arm/kernel/smp_tlb.c
@@ -104,7 +104,7 @@ void flush_tlb_all(void)
 	if (tlb_ops_need_broadcast())
 		on_each_cpu(ipi_flush_tlb_all, NULL, 1);
 	else
-		local_flush_tlb_all();
+		__flush_tlb_all();
 	broadcast_tlb_a15_erratum();
 }
 
@@ -113,7 +113,7 @@ void flush_tlb_mm(struct mm_struct *mm)
 	if (tlb_ops_need_broadcast())
 		on_each_cpu_mask(mm_cpumask(mm), ipi_flush_tlb_mm, mm, 1);
 	else
-		local_flush_tlb_mm(mm);
+		__flush_tlb_mm(mm);
 	broadcast_tlb_mm_a15_erratum(mm);
 }
 
@@ -126,7 +126,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 		on_each_cpu_mask(mm_cpumask(vma->vm_mm), ipi_flush_tlb_page,
 					&ta, 1);
 	} else
-		local_flush_tlb_page(vma, uaddr);
+		__flush_tlb_page(vma, uaddr);
 	broadcast_tlb_mm_a15_erratum(vma->vm_mm);
 }
 
@@ -137,7 +137,7 @@ void flush_tlb_kernel_page(unsigned long kaddr)
 		ta.ta_start = kaddr;
 		on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
 	} else
-		local_flush_tlb_kernel_page(kaddr);
+		__flush_tlb_kernel_page(kaddr);
 	broadcast_tlb_a15_erratum();
 }
 
@@ -173,5 +173,5 @@ void flush_bp_all(void)
 	if (tlb_ops_need_broadcast())
 		on_each_cpu(ipi_flush_bp_all, NULL, 1);
 	else
-		local_flush_bp_all();
+		__flush_bp_all();
 }
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 2595620..2985c9f 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/clk.h>
+#include <linux/cpu.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/err.h>
@@ -24,7 +25,6 @@
 
 #include <asm/smp_plat.h>
 #include <asm/smp_twd.h>
-#include <asm/localtimer.h>
 
 /* set up by the platform code */
 static void __iomem *twd_base;
@@ -33,7 +33,7 @@ static struct clk *twd_clk;
 static unsigned long twd_timer_rate;
 static DEFINE_PER_CPU(bool, percpu_setup_called);
 
-static struct clock_event_device __percpu **twd_evt;
+static struct clock_event_device __percpu *twd_evt;
 static int twd_ppi;
 
 static void twd_set_mode(enum clock_event_mode mode,
@@ -90,8 +90,10 @@ static int twd_timer_ack(void)
 	return 0;
 }
 
-static void twd_timer_stop(struct clock_event_device *clk)
+static void twd_timer_stop(void)
 {
+	struct clock_event_device *clk = __this_cpu_ptr(twd_evt);
+
 	twd_set_mode(CLOCK_EVT_MODE_UNUSED, clk);
 	disable_percpu_irq(clk->irq);
 }
@@ -106,7 +108,7 @@ static void twd_update_frequency(void *new_rate)
 {
 	twd_timer_rate = *((unsigned long *) new_rate);
 
-	clockevents_update_freq(*__this_cpu_ptr(twd_evt), twd_timer_rate);
+	clockevents_update_freq(__this_cpu_ptr(twd_evt), twd_timer_rate);
 }
 
 static int twd_rate_change(struct notifier_block *nb,
@@ -132,7 +134,7 @@ static struct notifier_block twd_clk_nb = {
 
 static int twd_clk_init(void)
 {
-	if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk))
+	if (twd_evt && __this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk))
 		return clk_notifier_register(twd_clk, &twd_clk_nb);
 
 	return 0;
@@ -151,7 +153,7 @@ static void twd_update_frequency(void *data)
 {
 	twd_timer_rate = clk_get_rate(twd_clk);
 
-	clockevents_update_freq(*__this_cpu_ptr(twd_evt), twd_timer_rate);
+	clockevents_update_freq(__this_cpu_ptr(twd_evt), twd_timer_rate);
 }
 
 static int twd_cpufreq_transition(struct notifier_block *nb,
@@ -177,7 +179,7 @@ static struct notifier_block twd_cpufreq_nb = {
 
 static int twd_cpufreq_init(void)
 {
-	if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk))
+	if (twd_evt && __this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk))
 		return cpufreq_register_notifier(&twd_cpufreq_nb,
 			CPUFREQ_TRANSITION_NOTIFIER);
 
@@ -228,7 +230,7 @@ static void twd_calibrate_rate(void)
 
 static irqreturn_t twd_handler(int irq, void *dev_id)
 {
-	struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
+	struct clock_event_device *evt = dev_id;
 
 	if (twd_timer_ack()) {
 		evt->event_handler(evt);
@@ -265,9 +267,9 @@ static void twd_get_clock(struct device_node *np)
 /*
  * Setup the local clock events for a CPU.
  */
-static int twd_timer_setup(struct clock_event_device *clk)
+static void twd_timer_setup(void)
 {
-	struct clock_event_device **this_cpu_clk;
+	struct clock_event_device *clk = __this_cpu_ptr(twd_evt);
 	int cpu = smp_processor_id();
 
 	/*
@@ -276,9 +278,9 @@ static int twd_timer_setup(struct clock_event_device *clk)
 	 */
 	if (per_cpu(percpu_setup_called, cpu)) {
 		__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
-		clockevents_register_device(*__this_cpu_ptr(twd_evt));
+		clockevents_register_device(clk);
 		enable_percpu_irq(clk->irq, 0);
-		return 0;
+		return;
 	}
 	per_cpu(percpu_setup_called, cpu) = true;
 
@@ -297,27 +299,37 @@ static int twd_timer_setup(struct clock_event_device *clk)
 	clk->set_mode = twd_set_mode;
 	clk->set_next_event = twd_set_next_event;
 	clk->irq = twd_ppi;
-
-	this_cpu_clk = __this_cpu_ptr(twd_evt);
-	*this_cpu_clk = clk;
+	clk->cpumask = cpumask_of(cpu);
 
 	clockevents_config_and_register(clk, twd_timer_rate,
 					0xf, 0xffffffff);
 	enable_percpu_irq(clk->irq, 0);
+}
 
-	return 0;
+static int twd_timer_cpu_notify(struct notifier_block *self,
+				unsigned long action, void *hcpu)
+{
+	switch (action & ~CPU_TASKS_FROZEN) {
+	case CPU_STARTING:
+		twd_timer_setup();
+		break;
+	case CPU_DYING:
+		twd_timer_stop();
+		break;
+	}
+
+	return NOTIFY_OK;
 }
 
-static struct local_timer_ops twd_lt_ops = {
-	.setup	= twd_timer_setup,
-	.stop	= twd_timer_stop,
+static struct notifier_block twd_timer_cpu_nb = {
+	.notifier_call = twd_timer_cpu_notify,
 };
 
 static int __init twd_local_timer_common_register(struct device_node *np)
 {
 	int err;
 
-	twd_evt = alloc_percpu(struct clock_event_device *);
+	twd_evt = alloc_percpu(struct clock_event_device);
 	if (!twd_evt) {
 		err = -ENOMEM;
 		goto out_free;
@@ -329,12 +341,22 @@ static int __init twd_local_timer_common_register(struct device_node *np)
 		goto out_free;
 	}
 
-	err = local_timer_register(&twd_lt_ops);
+	err = register_cpu_notifier(&twd_timer_cpu_nb);
 	if (err)
 		goto out_irq;
 
 	twd_get_clock(np);
 
+	/*
+	 * Immediately configure the timer on the boot CPU, unless we need
+	 * jiffies to be incrementing to calibrate the rate in which case
+	 * setup the timer in late_time_init.
+	 */
+	if (twd_timer_rate)
+		twd_timer_setup();
+	else
+		late_time_init = twd_timer_setup;
+
 	return 0;
 
 out_irq:
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 98aee32..829a96d 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -11,25 +11,26 @@
  *  This file contains the ARM-specific time handling details:
  *  reading the RTC at bootup, etc...
  */
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/errno.h>
 #include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/profile.h>
 #include <linux/sched.h>
+#include <linux/sched_clock.h>
 #include <linux/smp.h>
+#include <linux/time.h>
 #include <linux/timex.h>
-#include <linux/errno.h>
-#include <linux/profile.h>
 #include <linux/timer.h>
-#include <linux/clocksource.h>
-#include <linux/irq.h>
-#include <linux/sched_clock.h>
 
-#include <asm/thread_info.h>
-#include <asm/stacktrace.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
+#include <asm/stacktrace.h>
+#include <asm/thread_info.h>
 
 #if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || \
     defined(CONFIG_NVRAM) || defined(CONFIG_NVRAM_MODULE)
@@ -116,8 +117,12 @@ int __init register_persistent_clock(clock_access_fn read_boot,
 
 void __init time_init(void)
 {
-	if (machine_desc->init_time)
+	if (machine_desc->init_time) {
 		machine_desc->init_time();
-	else
+	} else {
+#ifdef CONFIG_COMMON_CLK
+		of_clk_init(NULL);
+#endif
 		clocksource_of_init();
+	}
 }
diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
index c5a5954..85a8737 100644
--- a/arch/arm/kernel/topology.c
+++ b/arch/arm/kernel/topology.c
@@ -74,12 +74,8 @@ struct cpu_efficiency table_efficiency[] = {
 	{NULL, },
 };
 
-struct cpu_capacity {
-	unsigned long hwid;
-	unsigned long capacity;
-};
-
-struct cpu_capacity *cpu_capacity;
+unsigned long *__cpu_capacity;
+#define cpu_capacity(cpu)	__cpu_capacity[cpu]
 
 unsigned long middle_capacity = 1;
 
@@ -100,15 +96,19 @@ static void __init parse_dt_topology(void)
 	unsigned long capacity = 0;
 	int alloc_size, cpu = 0;
 
-	alloc_size = nr_cpu_ids * sizeof(struct cpu_capacity);
-	cpu_capacity = kzalloc(alloc_size, GFP_NOWAIT);
+	alloc_size = nr_cpu_ids * sizeof(*__cpu_capacity);
+	__cpu_capacity = kzalloc(alloc_size, GFP_NOWAIT);
 
-	while ((cn = of_find_node_by_type(cn, "cpu"))) {
-		const u32 *rate, *reg;
+	for_each_possible_cpu(cpu) {
+		const u32 *rate;
 		int len;
 
-		if (cpu >= num_possible_cpus())
-			break;
+		/* too early to use cpu->of_node */
+		cn = of_get_cpu_node(cpu, NULL);
+		if (!cn) {
+			pr_err("missing device node for CPU %d\n", cpu);
+			continue;
+		}
 
 		for (cpu_eff = table_efficiency; cpu_eff->compatible; cpu_eff++)
 			if (of_device_is_compatible(cn, cpu_eff->compatible))
@@ -124,12 +124,6 @@ static void __init parse_dt_topology(void)
 			continue;
 		}
 
-		reg = of_get_property(cn, "reg", &len);
-		if (!reg || len != 4) {
-			pr_err("%s missing reg property\n", cn->full_name);
-			continue;
-		}
-
 		capacity = ((be32_to_cpup(rate)) >> 20) * cpu_eff->efficiency;
 
 		/* Save min capacity of the system */
@@ -140,13 +134,9 @@ static void __init parse_dt_topology(void)
 		if (capacity > max_capacity)
 			max_capacity = capacity;
 
-		cpu_capacity[cpu].capacity = capacity;
-		cpu_capacity[cpu++].hwid = be32_to_cpup(reg);
+		cpu_capacity(cpu) = capacity;
 	}
 
-	if (cpu < num_possible_cpus())
-		cpu_capacity[cpu].hwid = (unsigned long)(-1);
-
 	/* If min and max capacities are equals, we bypass the update of the
 	 * cpu_scale because all CPUs have the same capacity. Otherwise, we
 	 * compute a middle_capacity factor that will ensure that the capacity
@@ -154,9 +144,7 @@ static void __init parse_dt_topology(void)
 	 * SCHED_POWER_SCALE, which is the default value, but with the
 	 * constraint explained near table_efficiency[].
 	 */
-	if (min_capacity == max_capacity)
-		cpu_capacity[0].hwid = (unsigned long)(-1);
-	else if (4*max_capacity < (3*(max_capacity + min_capacity)))
+	if (4*max_capacity < (3*(max_capacity + min_capacity)))
 		middle_capacity = (min_capacity + max_capacity)
 				>> (SCHED_POWER_SHIFT+1);
 	else
@@ -170,23 +158,12 @@ static void __init parse_dt_topology(void)
  * boot. The update of all CPUs is in O(n^2) for heteregeneous system but the
  * function returns directly for SMP system.
  */
-void update_cpu_power(unsigned int cpu, unsigned long hwid)
+void update_cpu_power(unsigned int cpu)
 {
-	unsigned int idx = 0;
-
-	/* look for the cpu's hwid in the cpu capacity table */
-	for (idx = 0; idx < num_possible_cpus(); idx++) {
-		if (cpu_capacity[idx].hwid == hwid)
-			break;
-
-		if (cpu_capacity[idx].hwid == -1)
-			return;
-	}
-
-	if (idx == num_possible_cpus())
+	if (!cpu_capacity(cpu))
 		return;
 
-	set_power_scale(cpu, cpu_capacity[idx].capacity / middle_capacity);
+	set_power_scale(cpu, cpu_capacity(cpu) / middle_capacity);
 
 	printk(KERN_INFO "CPU%u: update cpu_power %lu\n",
 		cpu, arch_scale_freq_power(NULL, cpu));
@@ -194,7 +171,7 @@ void update_cpu_power(unsigned int cpu, unsigned long hwid)
 
 #else
 static inline void parse_dt_topology(void) {}
-static inline void update_cpu_power(unsigned int cpuid, unsigned int mpidr) {}
+static inline void update_cpu_power(unsigned int cpuid) {}
 #endif
 
  /*
@@ -281,7 +258,7 @@ void store_cpu_topology(unsigned int cpuid)
 
 	update_siblings_masks(cpuid);
 
-	update_cpu_power(cpuid, mpidr & MPIDR_HWID_BITMASK);
+	update_cpu_power(cpuid);
 
 	printk(KERN_INFO "CPU%u: thread %d, cpu %d, socket %d, mpidr %x\n",
 		cpuid, cpu_topology[cpuid].thread_id,
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index ab517fc..8fcda14 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -497,28 +497,64 @@ static int bad_syscall(int n, struct pt_regs *regs)
 	return regs->ARM_r0;
 }
 
+static long do_cache_op_restart(struct restart_block *);
+
 static inline int
-do_cache_op(unsigned long start, unsigned long end, int flags)
+__do_cache_op(unsigned long start, unsigned long end)
 {
-	struct mm_struct *mm = current->active_mm;
-	struct vm_area_struct *vma;
+	int ret;
+	unsigned long chunk = PAGE_SIZE;
+
+	do {
+		if (signal_pending(current)) {
+			struct thread_info *ti = current_thread_info();
+
+			ti->restart_block = (struct restart_block) {
+				.fn	= do_cache_op_restart,
+			};
+
+			ti->arm_restart_block = (struct arm_restart_block) {
+				{
+					.cache = {
+						.start	= start,
+						.end	= end,
+					},
+				},
+			};
+
+			return -ERESTART_RESTARTBLOCK;
+		}
+
+		ret = flush_cache_user_range(start, start + chunk);
+		if (ret)
+			return ret;
 
+		cond_resched();
+		start += chunk;
+	} while (start < end);
+
+	return 0;
+}
+
+static long do_cache_op_restart(struct restart_block *unused)
+{
+	struct arm_restart_block *restart_block;
+
+	restart_block = &current_thread_info()->arm_restart_block;
+	return __do_cache_op(restart_block->cache.start,
+			     restart_block->cache.end);
+}
+
+static inline int
+do_cache_op(unsigned long start, unsigned long end, int flags)
+{
 	if (end < start || flags)
 		return -EINVAL;
 
-	down_read(&mm->mmap_sem);
-	vma = find_vma(mm, start);
-	if (vma && vma->vm_start < end) {
-		if (start < vma->vm_start)
-			start = vma->vm_start;
-		if (end > vma->vm_end)
-			end = vma->vm_end;
+	if (!access_ok(VERIFY_READ, start, end - start))
+		return -EFAULT;
 
-		up_read(&mm->mmap_sem);
-		return flush_cache_user_range(start, end);
-	}
-	up_read(&mm->mmap_sem);
-	return -EINVAL;
+	return __do_cache_op(start, end);
 }
 
 /*
diff --git a/arch/arm/kernel/v7m.c b/arch/arm/kernel/v7m.c
new file mode 100644
index 0000000..4d2cba9
--- /dev/null
+++ b/arch/arm/kernel/v7m.c
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2013 Uwe Kleine-Koenig for Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/io.h>
+#include <linux/reboot.h>
+#include <asm/barrier.h>
+#include <asm/v7m.h>
+
+void armv7m_restart(enum reboot_mode mode, const char *cmd)
+{
+	dsb();
+	__raw_writel(V7M_SCB_AIRCR_VECTKEY | V7M_SCB_AIRCR_SYSRESETREQ,
+			BASEADDR_V7M_SCB + V7M_SCB_AIRCR);
+	dsb();
+}
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
index 741f66a..9c697db 100644
--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@@ -219,6 +219,10 @@ long kvm_arch_dev_ioctl(struct file *filp,
 	return -EINVAL;
 }
 
+void kvm_arch_memslots_updated(struct kvm *kvm)
+{
+}
+
 int kvm_arch_prepare_memory_region(struct kvm *kvm,
 				   struct kvm_memory_slot *memslot,
 				   struct kvm_userspace_memory_region *mem,
diff --git a/arch/arm/kvm/init.S b/arch/arm/kvm/init.S
index f048338..1b9844d 100644
--- a/arch/arm/kvm/init.S
+++ b/arch/arm/kvm/init.S
@@ -142,7 +142,7 @@ target:	@ We're now in the trampoline code, switch page tables
 
 	@ Invalidate the old TLBs
 	mcr	p15, 4, r0, c8, c7, 0	@ TLBIALLH
-	dsb
+	dsb	ish
 
 	eret
 
diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S
index 16cd4ba..ddc1553 100644
--- a/arch/arm/kvm/interrupts.S
+++ b/arch/arm/kvm/interrupts.S
@@ -55,7 +55,7 @@ ENTRY(__kvm_tlb_flush_vmid_ipa)
 	mcrr	p15, 6, r2, r3, c2	@ Write VTTBR
 	isb
 	mcr     p15, 0, r0, c8, c3, 0	@ TLBIALLIS (rt ignored)
-	dsb
+	dsb	ish
 	isb
 	mov	r2, #0
 	mov	r3, #0
@@ -79,7 +79,7 @@ ENTRY(__kvm_flush_vm_context)
 	mcr     p15, 4, r0, c8, c3, 4
 	/* Invalidate instruction caches Inner Shareable (ICIALLUIS) */
 	mcr     p15, 0, r0, c7, c1, 0
-	dsb
+	dsb	ish
 	isb				@ Not necessary if followed by eret
 
 	bx	lr
@@ -492,10 +492,10 @@ __kvm_hyp_code_end:
 	.section ".rodata"
 
 und_die_str:
-	.ascii	"unexpected undefined exception in Hyp mode at: %#08x"
+	.ascii	"unexpected undefined exception in Hyp mode at: %#08x\n"
 pabt_die_str:
-	.ascii	"unexpected prefetch abort in Hyp mode at: %#08x"
+	.ascii	"unexpected prefetch abort in Hyp mode at: %#08x\n"
 dabt_die_str:
-	.ascii	"unexpected data abort in Hyp mode at: %#08x"
+	.ascii	"unexpected data abort in Hyp mode at: %#08x\n"
 svc_die_str:
-	.ascii	"unexpected HVC/SVC trap in Hyp mode at: %#08x"
+	.ascii	"unexpected HVC/SVC trap in Hyp mode at: %#08x\n"
diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
index 0988d9e..b0de86b 100644
--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
@@ -489,7 +489,6 @@ int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa,
 
 	for (addr = guest_ipa; addr < end; addr += PAGE_SIZE) {
 		pte_t pte = pfn_pte(pfn, PAGE_S2_DEVICE);
-		kvm_set_s2pte_writable(&pte);
 
 		ret = mmu_topup_memory_cache(&cache, 2, 2);
 		if (ret)
diff --git a/arch/arm/kvm/reset.c b/arch/arm/kvm/reset.c
index b7840e7..c02ba4a 100644
--- a/arch/arm/kvm/reset.c
+++ b/arch/arm/kvm/reset.c
@@ -40,7 +40,7 @@ static struct kvm_regs a15_regs_reset = {
 };
 
 static const struct kvm_irq_level a15_vtimer_irq = {
-	.irq = 27,
+	{ .irq = 27 },
 	.level = 1,
 };
 
@@ -58,14 +58,14 @@ static const struct kvm_irq_level a15_vtimer_irq = {
  */
 int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 {
-	struct kvm_regs *cpu_reset;
+	struct kvm_regs *reset_regs;
 	const struct kvm_irq_level *cpu_vtimer_irq;
 
 	switch (vcpu->arch.target) {
 	case KVM_ARM_TARGET_CORTEX_A15:
 		if (vcpu->vcpu_id > a15_max_cpu_idx)
 			return -EINVAL;
-		cpu_reset = &a15_regs_reset;
+		reset_regs = &a15_regs_reset;
 		vcpu->arch.midr = read_cpuid_id();
 		cpu_vtimer_irq = &a15_vtimer_irq;
 		break;
@@ -74,7 +74,7 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 	}
 
 	/* Reset core registers */
-	memcpy(&vcpu->arch.regs, cpu_reset, sizeof(vcpu->arch.regs));
+	memcpy(&vcpu->arch.regs, reset_regs, sizeof(vcpu->arch.regs));
 
 	/* Reset CP15 registers */
 	kvm_reset_coprocs(vcpu);
diff --git a/arch/arm/kvm/trace.h b/arch/arm/kvm/trace.h
index a8e73ed..b1d640f 100644
--- a/arch/arm/kvm/trace.h
+++ b/arch/arm/kvm/trace.h
@@ -59,10 +59,9 @@ TRACE_EVENT(kvm_guest_fault,
 		__entry->ipa			= ipa;
 	),
 
-	TP_printk("guest fault at PC %#08lx (hxfar %#08lx, "
-		  "ipa %#16llx, hsr %#08lx",
-		  __entry->vcpu_pc, __entry->hxfar,
-		  __entry->ipa, __entry->hsr)
+	TP_printk("ipa %#llx, hsr %#08lx, hxfar %#08lx, pc %#08lx",
+		  __entry->ipa, __entry->hsr,
+		  __entry->hxfar, __entry->vcpu_pc)
 );
 
 TRACE_EVENT(kvm_irq_line,
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index af72969..47d7338 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -41,7 +41,12 @@ else
 endif
 
 lib-$(CONFIG_ARCH_RPC)		+= ecard.o io-acorn.o floppydma.o
-lib-$(CONFIG_ARCH_SHARK)	+= io-shark.o
 
 $(obj)/csumpartialcopy.o:	$(obj)/csumpartialcopygeneric.S
 $(obj)/csumpartialcopyuser.o:	$(obj)/csumpartialcopygeneric.S
+
+ifeq ($(CONFIG_KERNEL_MODE_NEON),y)
+  NEON_FLAGS			:= -mfloat-abi=softfp -mfpu=neon
+  CFLAGS_xor-neon.o		+= $(NEON_FLAGS)
+  obj-$(CONFIG_XOR_BLOCKS)	+= xor-neon.o
+endif
diff --git a/arch/arm/lib/xor-neon.c b/arch/arm/lib/xor-neon.c
new file mode 100644
index 0000000..2c40aea
--- /dev/null
+++ b/arch/arm/lib/xor-neon.c
@@ -0,0 +1,46 @@
+/*
+ * linux/arch/arm/lib/xor-neon.c
+ *
+ * Copyright (C) 2013 Linaro Ltd <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/raid/xor.h>
+#include <linux/module.h>
+
+MODULE_LICENSE("GPL");
+
+#ifndef __ARM_NEON__
+#error You should compile this file with '-mfloat-abi=softfp -mfpu=neon'
+#endif
+
+/*
+ * Pull in the reference implementations while instructing GCC (through
+ * -ftree-vectorize) to attempt to exploit implicit parallelism and emit
+ * NEON instructions.
+ */
+#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)
+#pragma GCC optimize "tree-vectorize"
+#else
+/*
+ * While older versions of GCC do not generate incorrect code, they fail to
+ * recognize the parallel nature of these functions, and emit plain ARM code,
+ * which is known to be slower than the optimized ARM code in asm-arm/xor.h.
+ */
+#warning This code requires at least version 4.6 of GCC
+#endif
+
+#pragma GCC diagnostic ignored "-Wunused-variable"
+#include <asm-generic/xor.h>
+
+struct xor_block_template const xor_block_neon_inner = {
+	.name	= "__inner_neon__",
+	.do_2	= xor_8regs_2,
+	.do_3	= xor_8regs_3,
+	.do_4	= xor_8regs_4,
+	.do_5	= xor_8regs_5,
+};
+EXPORT_SYMBOL(xor_block_neon_inner);
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 180b302..f607deb 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -93,7 +93,7 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction at91rm9200_timer_irq = {
 	.name		= "at91_tick",
-	.flags		= IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= at91rm9200_timer_interrupt,
 	.irq		= NR_IRQS_LEGACY + AT91_ID_SYS,
 };
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 3a4bc2e..bb39232 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -171,7 +171,7 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
 
 static struct irqaction at91sam926x_pit_irq = {
 	.name		= "at91_tick",
-	.flags		= IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= at91sam926x_pit_interrupt,
 	.irq		= NR_IRQS_LEGACY + AT91_ID_SYS,
 };
diff --git a/arch/arm/mach-at91/at91sam9g45_reset.S b/arch/arm/mach-at91/at91sam9g45_reset.S
index 721a1a3..c40c1e2 100644
--- a/arch/arm/mach-at91/at91sam9g45_reset.S
+++ b/arch/arm/mach-at91/at91sam9g45_reset.S
@@ -16,11 +16,17 @@
 #include "at91_rstc.h"
 			.arm
 
+/*
+ * at91_ramc_base is an array void*
+ * init at NULL if only one DDR controler is present in or DT
+ */
 			.globl	at91sam9g45_restart
 
 at91sam9g45_restart:
 			ldr	r5, =at91_ramc_base		@ preload constants
 			ldr	r0, [r5]
+			ldr	r5, [r5, #4]			@ ddr1
+			cmp	r5, #0
 			ldr	r4, =at91_rstc_base
 			ldr	r1, [r4]
 
@@ -30,6 +36,8 @@ at91sam9g45_restart:
 
 			.balign	32				@ align to cache line
 
+			strne	r2, [r5, #AT91_DDRSDRC_RTR]	@ disable DDR1 access
+			strne	r3, [r5, #AT91_DDRSDRC_LPR]	@ power down DDR1
 			str	r2, [r0, #AT91_DDRSDRC_RTR]	@ disable DDR0 access
 			str	r3, [r0, #AT91_DDRSDRC_LPR]	@ power down DDR0
 			str	r4, [r1, #AT91_RSTC_CR]		@ reset processor
diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c
index c7d670d..2d895a2 100644
--- a/arch/arm/mach-at91/at91sam9n12.c
+++ b/arch/arm/mach-at91/at91sam9n12.c
@@ -169,6 +169,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb_clk),
 	CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc_clk),
+	CLKDEV_CON_DEV_ID(NULL, "f0010000.ssc", &ssc_clk),
 	CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk),
 	CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk),
 	CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk),
diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c
index 2919eba..c0e637a 100644
--- a/arch/arm/mach-at91/at91x40_time.c
+++ b/arch/arm/mach-at91/at91x40_time.c
@@ -57,7 +57,7 @@ static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction at91x40_timer_irq = {
 	.name		= "at91_tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.flags		= IRQF_TIMER,
 	.handler	= at91x40_timer_interrupt
 };
 
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index ade948b..112e867 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -112,7 +112,7 @@ static struct spi_board_info cam60_spi_devices[] __initdata = {
 /*
  * MACB Ethernet device
  */
-static struct __initdata macb_platform_data cam60_macb_data = {
+static struct macb_platform_data cam60_macb_data __initdata = {
 	.phy_irq_pin	= AT91_PIN_PB5,
 	.is_rmii	= 0,
 };
diff --git a/arch/arm/mach-at91/board-dt-rm9200.c b/arch/arm/mach-at91/board-dt-rm9200.c
index 3fcb662..3a185fa 100644
--- a/arch/arm/mach-at91/board-dt-rm9200.c
+++ b/arch/arm/mach-at91/board-dt-rm9200.c
@@ -14,7 +14,6 @@
 #include <linux/gpio.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
-#include <linux/of_platform.h>
 
 #include <asm/setup.h>
 #include <asm/irq.h>
@@ -36,11 +35,6 @@ static void __init at91rm9200_dt_init_irq(void)
 	of_irq_init(irq_of_match);
 }
 
-static void __init at91rm9200_dt_device_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
 static const char *at91rm9200_dt_board_compat[] __initdata = {
 	"atmel,at91rm9200",
 	NULL
@@ -52,6 +46,5 @@ DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)")
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= at91rm9200_dt_initialize,
 	.init_irq	= at91rm9200_dt_init_irq,
-	.init_machine	= at91rm9200_dt_device_init,
 	.dt_compat	= at91rm9200_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-dt-sam9.c b/arch/arm/mach-at91/board-dt-sam9.c
index 8db3013..3dab868 100644
--- a/arch/arm/mach-at91/board-dt-sam9.c
+++ b/arch/arm/mach-at91/board-dt-sam9.c
@@ -13,7 +13,6 @@
 #include <linux/gpio.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
-#include <linux/of_platform.h>
 
 #include <asm/setup.h>
 #include <asm/irq.h>
@@ -37,11 +36,6 @@ static void __init at91_dt_init_irq(void)
 	of_irq_init(irq_of_match);
 }
 
-static void __init at91_dt_device_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
 static const char *at91_dt_board_compat[] __initdata = {
 	"atmel,at91sam9",
 	NULL
@@ -54,6 +48,5 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= at91_dt_initialize,
 	.init_irq	= at91_dt_init_irq,
-	.init_machine	= at91_dt_device_init,
 	.dt_compat	= at91_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c
index ad95f6a..bf00d15 100644
--- a/arch/arm/mach-at91/board-dt-sama5.c
+++ b/arch/arm/mach-at91/board-dt-sama5.c
@@ -42,20 +42,15 @@ static int ksz9021rn_phy_fixup(struct phy_device *phy)
 {
 	int value;
 
-#define GMII_RCCPSR	260
-#define GMII_RRDPSR	261
-#define GMII_ERCR	11
-#define GMII_ERDWR	12
-
 	/* Set delay values */
-	value = GMII_RCCPSR | 0x8000;
-	phy_write(phy, GMII_ERCR, value);
+	value = MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW | 0x8000;
+	phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value);
 	value = 0xF2F4;
-	phy_write(phy, GMII_ERDWR, value);
-	value = GMII_RRDPSR | 0x8000;
-	phy_write(phy, GMII_ERCR, value);
+	phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value);
+	value = MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW | 0x8000;
+	phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value);
 	value = 0x2222;
-	phy_write(phy, GMII_ERDWR, value);
+	phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value);
 
 	return 0;
 }
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index 3aaa978..f1d49e9 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -26,7 +26,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-at91/include/mach/at91_adc.h b/arch/arm/mach-at91/include/mach/at91_adc.h
index 8e7ed5c..c287307 100644
--- a/arch/arm/mach-at91/include/mach/at91_adc.h
+++ b/arch/arm/mach-at91/include/mach/at91_adc.h
@@ -28,9 +28,12 @@
 #define			AT91_ADC_TRGSEL_EXTERNAL	(6 << 1)
 #define		AT91_ADC_LOWRES		(1 << 4)	/* Low Resolution */
 #define		AT91_ADC_SLEEP		(1 << 5)	/* Sleep Mode */
-#define		AT91_ADC_PRESCAL	(0x3f << 8)	/* Prescalar Rate Selection */
+#define		AT91_ADC_PRESCAL_9260	(0x3f << 8)	/* Prescalar Rate Selection */
+#define		AT91_ADC_PRESCAL_9G45	(0xff << 8)
 #define			AT91_ADC_PRESCAL_(x)	((x) << 8)
-#define		AT91_ADC_STARTUP	(0x1f << 16)	/* Startup Up Time */
+#define		AT91_ADC_STARTUP_9260	(0x1f << 16)	/* Startup Up Time */
+#define		AT91_ADC_STARTUP_9G45	(0x7f << 16)
+#define		AT91_ADC_STARTUP_9X5	(0xf << 16)
 #define			AT91_ADC_STARTUP_(x)	((x) << 16)
 #define		AT91_ADC_SHTIM		(0xf  << 24)	/* Sample & Hold Time */
 #define			AT91_ADC_SHTIM_(x)	((x) << 24)
@@ -48,14 +51,57 @@
 #define		AT91_ADC_ENDRX		(1 << 18)	/* End of RX Buffer */
 #define		AT91_ADC_RXFUFF		(1 << 19)	/* RX Buffer Full */
 
+#define AT91_ADC_SR_9X5		0x30		/* Status Register for 9x5 */
+#define		AT91_ADC_SR_DRDY_9X5	(1 << 24)	/* Data Ready */
+
 #define AT91_ADC_LCDR		0x20		/* Last Converted Data Register */
 #define		AT91_ADC_LDATA		(0x3ff)
 
 #define AT91_ADC_IER		0x24		/* Interrupt Enable Register */
 #define AT91_ADC_IDR		0x28		/* Interrupt Disable Register */
 #define AT91_ADC_IMR		0x2C		/* Interrupt Mask Register */
+#define		AT91_ADC_IER_PEN	(1 << 29)
+#define		AT91_ADC_IER_NOPEN	(1 << 30)
+#define		AT91_ADC_IER_XRDY	(1 << 20)
+#define		AT91_ADC_IER_YRDY	(1 << 21)
+#define		AT91_ADC_IER_PRDY	(1 << 22)
+#define		AT91_ADC_ISR_PENS	(1 << 31)
 
 #define AT91_ADC_CHR(n)		(0x30 + ((n) * 4))	/* Channel Data Register N */
 #define		AT91_ADC_DATA		(0x3ff)
 
+#define AT91_ADC_CDR0_9X5	(0x50)			/* Channel Data Register 0 for 9X5 */
+
+#define AT91_ADC_ACR		0x94	/* Analog Control Register */
+#define		AT91_ADC_ACR_PENDETSENS	(0x3 << 0)	/* pull-up resistor */
+
+#define AT91_ADC_TSMR		0xB0
+#define		AT91_ADC_TSMR_TSMODE	(3 << 0)	/* Touch Screen Mode */
+#define			AT91_ADC_TSMR_TSMODE_NONE		(0 << 0)
+#define			AT91_ADC_TSMR_TSMODE_4WIRE_NO_PRESS	(1 << 0)
+#define			AT91_ADC_TSMR_TSMODE_4WIRE_PRESS	(2 << 0)
+#define			AT91_ADC_TSMR_TSMODE_5WIRE		(3 << 0)
+#define		AT91_ADC_TSMR_TSAV	(3 << 4)	/* Averages samples */
+#define			AT91_ADC_TSMR_TSAV_(x)		((x) << 4)
+#define		AT91_ADC_TSMR_SCTIM	(0x0f << 16)	/* Switch closure time */
+#define		AT91_ADC_TSMR_PENDBC	(0x0f << 28)	/* Pen Debounce time */
+#define			AT91_ADC_TSMR_PENDBC_(x)	((x) << 28)
+#define		AT91_ADC_TSMR_NOTSDMA	(1 << 22)	/* No Touchscreen DMA */
+#define		AT91_ADC_TSMR_PENDET_DIS	(0 << 24)	/* Pen contact detection disable */
+#define		AT91_ADC_TSMR_PENDET_ENA	(1 << 24)	/* Pen contact detection enable */
+
+#define AT91_ADC_TSXPOSR	0xB4
+#define AT91_ADC_TSYPOSR	0xB8
+#define AT91_ADC_TSPRESSR	0xBC
+
+#define AT91_ADC_TRGR_9260	AT91_ADC_MR
+#define AT91_ADC_TRGR_9G45	0x08
+#define AT91_ADC_TRGR_9X5	0xC0
+
+/* Trigger Register bit field */
+#define		AT91_ADC_TRGR_TRGPER	(0xffff << 16)
+#define			AT91_ADC_TRGR_TRGPER_(x)	((x) << 16)
+#define		AT91_ADC_TRGR_TRGMOD	(0x7 << 0)
+#define			AT91_ADC_TRGR_MOD_PERIOD_TRIG	(5 << 0)
+
 #endif
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index a832e07..f17aa31 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -33,6 +33,7 @@
 #include <mach/at91sam9g45.h>
 #include <mach/at91sam9x5.h>
 #include <mach/at91sam9n12.h>
+#include <mach/sama5d3.h>
 
 /*
  * On all at91 except rm9200 and x40 have the System Controller starts
diff --git a/arch/arm/mach-at91/include/mach/sama5d3.h b/arch/arm/mach-at91/include/mach/sama5d3.h
index 6dc81ee..31096a8 100644
--- a/arch/arm/mach-at91/include/mach/sama5d3.h
+++ b/arch/arm/mach-at91/include/mach/sama5d3.h
@@ -65,6 +65,14 @@
 #define SAMA5D3_ID_IRQ0		47	/* Advanced Interrupt Controller (IRQ0) */
 
 /*
+ * User Peripheral physical base addresses.
+ */
+#define SAMA5D3_BASE_USART0	0xf001c000
+#define SAMA5D3_BASE_USART1	0xf0020000
+#define SAMA5D3_BASE_USART2	0xf8020000
+#define SAMA5D3_BASE_USART3	0xf8024000
+
+/*
  * Internal Memory
  */
 #define SAMA5D3_SRAM_BASE	0x00300000	/* Internal SRAM base address */
diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h
index 5659f7c..4bb644f 100644
--- a/arch/arm/mach-at91/include/mach/uncompress.h
+++ b/arch/arm/mach-at91/include/mach/uncompress.h
@@ -94,6 +94,15 @@ static const u32 uarts_sam9x5[] = {
 	0,
 };
 
+static const u32 uarts_sama5[] = {
+	AT91_BASE_DBGU1,
+	SAMA5D3_BASE_USART0,
+	SAMA5D3_BASE_USART1,
+	SAMA5D3_BASE_USART2,
+	SAMA5D3_BASE_USART3,
+	0,
+};
+
 static inline const u32* decomp_soc_detect(void __iomem *dbgu_base)
 {
 	u32 cidr, socid;
@@ -121,8 +130,12 @@ static inline const u32* decomp_soc_detect(void __iomem *dbgu_base)
 	case ARCH_ID_AT91SAM9RL64:
 		return uarts_sam9rl;
 
+	case ARCH_ID_AT91SAM9N12:
 	case ARCH_ID_AT91SAM9X5:
 		return uarts_sam9x5;
+
+	case ARCH_ID_SAMA5D3:
+		return uarts_sama5;
 	}
 
 	/* at91sam9g10 */
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index f112895..9fe6d88 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -1,5 +1,16 @@
 config ARCH_BCM
-	bool "Broadcom SoC" if ARCH_MULTI_V7
+	bool "Broadcom SoC Support"
+	depends on ARCH_MULTIPLATFORM
+	help
+	  This enables support for Broadcom ARM based SoC
+          chips
+
+if ARCH_BCM
+
+menu "Broadcom SoC Selection"
+
+config ARCH_BCM_MOBILE
+	bool "Broadcom Mobile SoC" if ARCH_MULTI_V7
 	depends on MMU
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_ERRATA_754322
@@ -9,11 +20,17 @@ config ARCH_BCM
 	select CLKSRC_OF
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_TIME
-	select GPIO_BCM
+	select GPIO_BCM_KONA
 	select SPARSE_IRQ
 	select TICK_ONESHOT
+	select CACHE_L2X0
+	select HAVE_ARM_ARCH_TIMER
 	help
-	  This enables support for system based on Broadcom SoCs.
+	  This enables support for systems based on Broadcom mobile SoCs.
 	  It currently supports the 'BCM281XX' family, which includes
 	  BCM11130, BCM11140, BCM11351, BCM28145 and
 	  BCM28155 variants.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index 6adb6aec..c2ccd5a 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2012 Broadcom Corporation
+# Copyright (C) 2012-2013 Broadcom Corporation
 #
 # This program is free software; you can redistribute it and/or
 # modify it under the terms of the GNU General Public License as
@@ -10,6 +10,6 @@
 # of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-obj-$(CONFIG_ARCH_BCM)		:= board_bcm.o bcm_kona_smc.o bcm_kona_smc_asm.o
+obj-$(CONFIG_ARCH_BCM_MOBILE)	:= board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o
 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_bcm_kona_smc_asm.o	:=-Wa,-march=armv7-a$(plus_sec)
diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c
index 56d9d19..5e31e91 100644
--- a/arch/arm/mach-bcm/bcm_kona_smc.c
+++ b/arch/arm/mach-bcm/bcm_kona_smc.c
@@ -36,18 +36,20 @@ struct bcm_kona_smc_data {
 };
 
 static const struct of_device_id bcm_kona_smc_ids[] __initconst = {
-	{.compatible = "bcm,kona-smc"},
+	{.compatible = "brcm,kona-smc"},
+	{.compatible = "bcm,kona-smc"}, /* deprecated name */
 	{},
 };
 
 /* Map in the bounce area */
-void __init bcm_kona_smc_init(void)
+int __init bcm_kona_smc_init(void)
 {
 	struct device_node *node;
 
 	/* Read buffer addr and size from the device tree node */
 	node = of_find_matching_node(NULL, bcm_kona_smc_ids);
-	BUG_ON(!node);
+	if (!node)
+		return -ENODEV;
 
 	/* Don't care about size or flags of the DT node */
 	bridge_data.buffer_addr =
@@ -59,7 +61,9 @@ void __init bcm_kona_smc_init(void)
 
 	bridge_data.initialized = 1;
 
-	pr_info("Secure API initialized!\n");
+	pr_info("Kona Secure API initialized\n");
+
+	return 0;
 }
 
 /* __bcm_kona_smc() should only run on CPU 0, with pre-emption disabled */
diff --git a/arch/arm/mach-bcm/bcm_kona_smc.h b/arch/arm/mach-bcm/bcm_kona_smc.h
index 3bedbed1..d098a7e 100644
--- a/arch/arm/mach-bcm/bcm_kona_smc.h
+++ b/arch/arm/mach-bcm/bcm_kona_smc.h
@@ -64,7 +64,7 @@
 #define SSAPI_BRCM_START_VC_CORE	0x0E000008
 
 #ifndef	__ASSEMBLY__
-extern void bcm_kona_smc_init(void);
+extern int __init bcm_kona_smc_init(void);
 
 extern unsigned bcm_kona_smc(unsigned service_id,
 			     unsigned arg0,
diff --git a/arch/arm/mach-bcm/board_bcm.c b/arch/arm/mach-bcm/board_bcm281xx.c
index 2859932..cb3dc36 100644
--- a/arch/arm/mach-bcm/board_bcm.c
+++ b/arch/arm/mach-bcm/board_bcm281xx.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2012 Broadcom Corporation
+ * Copyright (C) 2012-2013 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -21,23 +21,39 @@
 #include <asm/mach/time.h>
 #include <asm/hardware/cache-l2x0.h>
 
-
 #include "bcm_kona_smc.h"
+#include "kona.h"
 
 static int __init kona_l2_cache_init(void)
 {
 	if (!IS_ENABLED(CONFIG_CACHE_L2X0))
 		return 0;
 
+	if (bcm_kona_smc_init() < 0) {
+		pr_info("Kona secure API not available. Skipping L2 init\n");
+		return 0;
+	}
+
 	bcm_kona_smc(SSAPI_ENABLE_L2_CACHE, 0, 0, 0, 0);
 
 	/*
 	 * The aux_val and aux_mask have no effect since L2 cache is already
 	 * enabled.  Pass 0s for aux_val and 1s for aux_mask for default value.
 	 */
-	l2x0_of_init(0, ~0);
+	return l2x0_of_init(0, ~0);
+}
 
-	return 0;
+static void bcm_board_setup_restart(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "brcm,bcm11351");
+	if (np) {
+		if (of_device_is_available(np))
+			bcm_kona_setup_restart();
+		of_node_put(np);
+	}
+	/* Restart setup for other boards goes here */
 }
 
 static void __init board_init(void)
@@ -45,15 +61,14 @@ static void __init board_init(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL,
 		&platform_bus);
 
-	bcm_kona_smc_init();
-
+	bcm_board_setup_restart();
 	kona_l2_cache_init();
 }
 
-static const char * const bcm11351_dt_compat[] = { "bcm,bcm11351", NULL, };
+static const char * const bcm11351_dt_compat[] = { "brcm,bcm11351", NULL, };
 
-DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor")
-	.init_time = clocksource_of_init,
+DT_MACHINE_START(BCM11351_DT, "BCM281xx Broadcom Application Processor")
 	.init_machine = board_init,
+	.restart = bcm_kona_restart,
 	.dt_compat = bcm11351_dt_compat,
 MACHINE_END
diff --git a/arch/arm/mach-bcm/kona.c b/arch/arm/mach-bcm/kona.c
new file mode 100644
index 0000000..6939d90
--- /dev/null
+++ b/arch/arm/mach-bcm/kona.c
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of_address.h>
+#include <asm/io.h>
+
+#include "kona.h"
+
+static void __iomem *watchdog_base;
+
+void bcm_kona_setup_restart(void)
+{
+	struct device_node *np_wdog;
+
+	/*
+	 * The assumption is that whoever calls bcm_kona_setup_restart()
+	 * also needs a Kona Watchdog Timer entry in Device Tree, i.e. we
+	 * report an error if the DT entry is missing.
+	 */
+	np_wdog = of_find_compatible_node(NULL, NULL, "brcm,kona-wdt");
+	if (!np_wdog) {
+		pr_err("brcm,kona-wdt not found in DT, reboot disabled\n");
+		return;
+	}
+	watchdog_base = of_iomap(np_wdog, 0);
+	WARN(!watchdog_base, "failed to map watchdog base");
+	of_node_put(np_wdog);
+}
+
+#define SECWDOG_OFFSET			0x00000000
+#define SECWDOG_RESERVED_MASK		0xE2000000
+#define SECWDOG_WD_LOAD_FLAG_MASK	0x10000000
+#define SECWDOG_EN_MASK			0x08000000
+#define SECWDOG_SRSTEN_MASK		0x04000000
+#define SECWDOG_CLKS_SHIFT		20
+#define SECWDOG_LOCK_SHIFT		0
+
+void bcm_kona_restart(enum reboot_mode mode, const char *cmd)
+{
+	uint32_t val;
+
+	if (!watchdog_base)
+		panic("Watchdog not mapped. Reboot failed.\n");
+
+	/* Enable watchdog2 with very short timeout. */
+	val = readl(watchdog_base + SECWDOG_OFFSET);
+	val &= SECWDOG_RESERVED_MASK | SECWDOG_WD_LOAD_FLAG_MASK;
+	val |= SECWDOG_EN_MASK | SECWDOG_SRSTEN_MASK |
+		(0x8 << SECWDOG_CLKS_SHIFT) |
+		(0x8 << SECWDOG_LOCK_SHIFT);
+	writel(val, watchdog_base + SECWDOG_OFFSET);
+
+	while (1)
+		;
+}
diff --git a/arch/arm/mach-bcm/kona.h b/arch/arm/mach-bcm/kona.h
new file mode 100644
index 0000000..291eca3
--- /dev/null
+++ b/arch/arm/mach-bcm/kona.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/reboot.h>
+
+void bcm_kona_setup_restart(void);
+void bcm_kona_restart(enum reboot_mode mode, const char *cmd);
diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm2835/bcm2835.c
index 40686d7..d50135b 100644
--- a/arch/arm/mach-bcm2835/bcm2835.c
+++ b/arch/arm/mach-bcm2835/bcm2835.c
@@ -18,7 +18,6 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/clk/bcm2835.h>
-#include <linux/clocksource.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -134,7 +133,6 @@ DT_MACHINE_START(BCM2835, "BCM2835")
 	.init_irq = bcm2835_init_irq,
 	.handle_irq = bcm2835_handle_irq,
 	.init_machine = bcm2835_init,
-	.init_time = clocksource_of_init,
 	.restart = bcm2835_restart,
 	.dt_compat = bcm2835_compat
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index 01ad4d4..bea6295 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -33,9 +33,6 @@ config ARCH_P720T
 	  Say Y here if you intend to run this kernel on the ARM Prospector
 	  720T.
 
-config ARCH_FORTUNET
-	bool "FORTUNET"
-
 config EP72XX_ROM_BOOT
 	bool "EP721x/EP731x ROM boot"
 	help
diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
index f30ed2b..f04151e 100644
--- a/arch/arm/mach-clps711x/Makefile
+++ b/arch/arm/mach-clps711x/Makefile
@@ -10,5 +10,4 @@ obj-$(CONFIG_ARCH_AUTCPU12)	+= board-autcpu12.o
 obj-$(CONFIG_ARCH_CDB89712)	+= board-cdb89712.o
 obj-$(CONFIG_ARCH_CLEP7312)	+= board-clep7312.o
 obj-$(CONFIG_ARCH_EDB7211)	+= board-edb7211.o
-obj-$(CONFIG_ARCH_FORTUNET)	+= board-fortunet.o
 obj-$(CONFIG_ARCH_P720T)	+= board-p720t.o
diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c
index 5867aeb..f8d71a8 100644
--- a/arch/arm/mach-clps711x/board-autcpu12.c
+++ b/arch/arm/mach-clps711x/board-autcpu12.c
@@ -259,11 +259,7 @@ static void __init autcpu12_init(void)
 static void __init autcpu12_init_late(void)
 {
 	gpio_request_array(autcpu12_gpios, ARRAY_SIZE(autcpu12_gpios));
-
-	if (IS_ENABLED(MTD_NAND_GPIO) && IS_ENABLED(GPIO_GENERIC_PLATFORM)) {
-		/* We are need both drivers to handle NAND */
-		platform_device_register(&autcpu12_nand_pdev);
-	}
+	platform_device_register(&autcpu12_nand_pdev);
 }
 
 MACHINE_START(AUTCPU12, "autronix autcpu12")
diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c
index 9dfb990..fe6184e 100644
--- a/arch/arm/mach-clps711x/board-edb7211.c
+++ b/arch/arm/mach-clps711x/board-edb7211.c
@@ -126,21 +126,6 @@ static struct gpio edb7211_gpios[] __initconst = {
 	{ EDB7211_LCDBL,	GPIOF_OUT_INIT_LOW,	"LCD BACKLIGHT" },
 };
 
-static struct map_desc edb7211_io_desc[] __initdata = {
-	{	/* Memory-mapped extra keyboard row */
-		.virtual	= IO_ADDRESS(EDB7211_EXTKBD_BASE),
-		.pfn		= __phys_to_pfn(EDB7211_EXTKBD_BASE),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init edb7211_map_io(void)
-{
-	clps711x_map_io();
-	iotable_init(edb7211_io_desc, ARRAY_SIZE(edb7211_io_desc));
-}
-
 /* Reserve screen memory region at the start of main system memory. */
 static void __init edb7211_reserve(void)
 {
@@ -195,7 +180,7 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
 	.nr_irqs	= CLPS711X_NR_IRQS,
 	.fixup		= fixup_edb7211,
 	.reserve	= edb7211_reserve,
-	.map_io		= edb7211_map_io,
+	.map_io		= clps711x_map_io,
 	.init_early	= clps711x_init_early,
 	.init_irq	= clps711x_init_irq,
 	.init_time	= clps711x_timer_init,
diff --git a/arch/arm/mach-clps711x/board-fortunet.c b/arch/arm/mach-clps711x/board-fortunet.c
deleted file mode 100644
index b1561e3..0000000
--- a/arch/arm/mach-clps711x/board-fortunet.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/fortunet.c
- *
- *  Derived from linux/arch/arm/mach-integrator/arch.c
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/initrd.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-
-#include <asm/memory.h>
-
-#include "common.h"
-
-struct meminfo memmap = {
-	.nr_banks	= 1,
-	.bank		= {
-		{
-			.start	= 0xC0000000,
-			.size	= 0x01000000,
-		},
-	},
-};
-
-typedef struct tag_IMAGE_PARAMS
-{
-	int	ramdisk_ok;
-	int	ramdisk_address;
-	int	ramdisk_size;
-	int	ram_size;
-	int	extra_param_type;
-	int	extra_param_ptr;
-	int	command_line;
-} IMAGE_PARAMS;
-
-#define IMAGE_PARAMS_PHYS	0xC01F0000
-
-static void __init
-fortunet_fixup(struct tag *tags, char **cmdline, struct meminfo *mi)
-{
-	IMAGE_PARAMS *ip = phys_to_virt(IMAGE_PARAMS_PHYS);
-	*cmdline = phys_to_virt(ip->command_line);
-#ifdef CONFIG_BLK_DEV_INITRD
-	if(ip->ramdisk_ok)
-	{
-		initrd_start = __phys_to_virt(ip->ramdisk_address);
-		initrd_end = initrd_start + ip->ramdisk_size;
-	}
-#endif
-	memmap.bank[0].size = ip->ram_size;
-	*mi = memmap;
-}
-
-MACHINE_START(FORTUNET, "ARM-FortuNet")
-	/* Maintainer: FortuNet Inc. */
-	.nr_irqs	= CLPS711X_NR_IRQS,
-	.fixup		= fortunet_fixup,
-	.map_io		= clps711x_map_io,
-	.init_early	= clps711x_init_early,
-	.init_irq	= clps711x_init_irq,
-	.init_time	= clps711x_timer_init,
-	.handle_irq	= clps711x_handle_irq,
-	.restart	= clps711x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index 4ca2f3c..134641d 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -29,12 +29,12 @@
 #include <linux/clockchips.h>
 #include <linux/clocksource.h>
 #include <linux/clk-provider.h>
+#include <linux/sched_clock.h>
 
 #include <asm/exception.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/sched_clock.h>
 #include <asm/system_misc.h>
 
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c
index 856b81c..fb77d14 100644
--- a/arch/arm/mach-clps711x/devices.c
+++ b/arch/arm/mach-clps711x/devices.c
@@ -57,7 +57,7 @@ static void __init clps711x_add_syscon(void)
 	unsigned i;
 
 	for (i = 0; i < ARRAY_SIZE(clps711x_syscon_res); i++)
-		platform_device_register_simple("clps711x-syscon", i + 1,
+		platform_device_register_simple("syscon", i + 1,
 						&clps711x_syscon_res[i], 1);
 }
 
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 1332de8..40f15f1 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -22,17 +22,19 @@
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/spi-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#include <mach/common.h>
 #include <mach/cp_intc.h>
 #include <mach/mux.h>
-#include <linux/platform_data/mtd-davinci.h>
 #include <mach/da8xx.h>
-#include <linux/platform_data/usb-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/spi-davinci.h>
 
 #define DA830_EVM_PHY_ID		""
 /*
@@ -74,7 +76,7 @@ static int da830_evm_usb_ocic_notify(da8xx_ocic_handler_t handler)
 	if (handler != NULL) {
 		da830_evm_usb_ocic_handler = handler;
 
-		error = request_irq(irq, da830_evm_usb_ocic_irq, IRQF_DISABLED |
+		error = request_irq(irq, da830_evm_usb_ocic_irq,
 				    IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 				    "OHCI over-current indicator", NULL);
 		if (error)
@@ -185,10 +187,6 @@ static __init void da830_evm_usb_init(void)
 			   __func__, ret);
 }
 
-static struct davinci_uart_config da830_evm_uart_config __initdata = {
-	.enabled_uarts = 0x7,
-};
-
 static const short da830_evm_mcasp1_pins[] = {
 	DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, DA830_AHCLKR1, DA830_AFSR1,
 	DA830_AMUTE1, DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_5,
@@ -595,6 +593,10 @@ static __init void da830_evm_init(void)
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	int ret;
 
+	ret = da830_register_gpio();
+	if (ret)
+		pr_warn("da830_evm_init: GPIO init failed: %d\n", ret);
+
 	ret = da830_register_edma(da830_edma_rsv);
 	if (ret)
 		pr_warning("da830_evm_init: edma registration failed: %d\n",
@@ -630,7 +632,7 @@ static __init void da830_evm_init(void)
 		pr_warning("da830_evm_init: watchdog registration failed: %d\n",
 				ret);
 
-	davinci_serial_init(&da830_evm_uart_config);
+	davinci_serial_init(da8xx_serial_device);
 	i2c_register_board_info(1, da830_evm_i2c_devices,
 			ARRAY_SIZE(da830_evm_i2c_devices));
 
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index bea6793..df16cb8 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -19,7 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/input.h>
 #include <linux/input/tps6507x-ts.h>
 #include <linux/mfd/tps6507x.h>
@@ -28,6 +28,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/gpio-davinci.h>
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/mtd-davinci-aemif.h>
 #include <linux/platform_data/spi-davinci.h>
@@ -38,6 +39,7 @@
 #include <linux/spi/flash.h>
 #include <linux/wl12xx.h>
 
+#include <mach/common.h>
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
 #include <mach/mux.h>
@@ -746,10 +748,6 @@ static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
 	.bus_delay	= 0,	/* usec */
 };
 
-static struct davinci_uart_config da850_evm_uart_config __initdata = {
-	.enabled_uarts = 0x7,
-};
-
 /* davinci da850 evm audio machine driver */
 static u8 da850_iis_serializer_direction[] = {
 	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
@@ -1249,12 +1247,10 @@ static struct vpif_capture_config da850_vpif_capture_config = {
 
 static struct adv7343_platform_data adv7343_pdata = {
 	.mode_config = {
-		.dac_3 = 1,
-		.dac_2 = 1,
-		.dac_1 = 1,
+		.dac = { 1, 1, 1 },
 	},
 	.sd_config = {
-		.sd_dac_out1 = 1,
+		.sd_dac_out = { 1 },
 	},
 };
 
@@ -1443,6 +1439,10 @@ static __init void da850_evm_init(void)
 {
 	int ret;
 
+	ret = da850_register_gpio();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	ret = pmic_tps65070_init();
 	if (ret)
 		pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret);
@@ -1494,7 +1494,7 @@ static __init void da850_evm_init(void)
 				__func__, ret);
 	}
 
-	davinci_serial_init(&da850_evm_uart_config);
+	davinci_serial_init(da8xx_serial_device);
 
 	i2c_register_board_info(1, da850_evm_i2c_devices,
 			ARRAY_SIZE(da850_evm_i2c_devices));
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index c2a0a67..ecdc7d4 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -22,15 +22,17 @@
 #include <media/tvp514x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
+#include <mach/common.h>
 
 #include "davinci.h"
 
@@ -314,10 +316,6 @@ static struct platform_device *davinci_evm_devices[] __initdata = {
 	&davinci_nand_device,
 };
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 static void __init dm355_evm_map_io(void)
 {
 	dm355_init();
@@ -379,6 +377,11 @@ static struct spi_board_info dm355_evm_spi_info[] __initconst = {
 static __init void dm355_evm_init(void)
 {
 	struct clk *aemif;
+	int ret;
+
+	ret = dm355_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
 
 	gpio_request(1, "dm9000");
 	gpio_direction_input(1);
@@ -393,7 +396,7 @@ static __init void dm355_evm_init(void)
 	platform_add_devices(davinci_evm_devices,
 			     ARRAY_SIZE(davinci_evm_devices));
 	evm_init_i2c();
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm355_serial_device);
 
 	/* NOTE:  NAND flash timings set by the UBL are slower than
 	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index 139e42d..43bacbf 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -19,15 +19,16 @@
 #include <linux/clk.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <linux/platform_data/i2c-davinci.h>
+#include <mach/common.h>
 #include <mach/serial.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
 
 #include "davinci.h"
 
@@ -173,10 +174,6 @@ static struct platform_device *davinci_leopard_devices[] __initdata = {
 	&davinci_nand_device,
 };
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 static void __init dm355_leopard_map_io(void)
 {
 	dm355_init();
@@ -238,6 +235,11 @@ static struct spi_board_info dm355_leopard_spi_info[] __initconst = {
 static __init void dm355_leopard_init(void)
 {
 	struct clk *aemif;
+	int ret;
+
+	ret = dm355_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
 
 	gpio_request(9, "dm9000");
 	gpio_direction_input(9);
@@ -252,7 +254,7 @@ static __init void dm355_leopard_init(void)
 	platform_add_devices(davinci_leopard_devices,
 			     ARRAY_SIZE(davinci_leopard_devices));
 	leopard_init_i2c();
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm355_serial_device);
 
 	/* NOTE:  NAND flash timings set by the UBL are slower than
 	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 4cdb61c..f4a6c18 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -176,7 +176,7 @@ static struct at24_platform_data eeprom_info = {
 	.context	= (void *)0x7f00,
 };
 
-static struct snd_platform_data dm365_evm_snd_data = {
+static struct snd_platform_data dm365_evm_snd_data __maybe_unused = {
 	.asp_chan_q = EVENTQ_3,
 };
 
@@ -718,10 +718,6 @@ fail:
 	/* REVISIT export switches: NTSC/PAL (SW5.6), EXTRA1 (SW5.2), etc */
 }
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 static void __init dm365_evm_map_io(void)
 {
 	dm365_init();
@@ -747,8 +743,14 @@ static struct spi_board_info dm365_evm_spi_info[] __initconst = {
 
 static __init void dm365_evm_init(void)
 {
+	int ret;
+
+	ret = dm365_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	evm_init_i2c();
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm365_serial_device);
 
 	dm365evm_emac_configure();
 	dm365evm_mmc_configure();
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index fa4bfaf..9cc32c2 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -727,10 +727,6 @@ static struct platform_device *davinci_evm_devices[] __initdata = {
 	&rtc_dev,
 };
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 static void __init
 davinci_evm_map_io(void)
 {
@@ -758,9 +754,14 @@ static int davinci_phy_fixup(struct phy_device *phydev)
 
 static __init void davinci_evm_init(void)
 {
+	int ret;
 	struct clk *aemif_clk;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
+	ret = dm644x_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	aemif_clk = clk_get(NULL, "aemif");
 	clk_prepare_enable(aemif_clk);
 
@@ -792,7 +793,7 @@ static __init void davinci_evm_init(void)
 	davinci_setup_mmc(0, &dm6446evm_mmc_config);
 	dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg);
 
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm644x_serial_device);
 	dm644x_init_asp(&dm644x_evm_snd_data);
 
 	/* irlml6401 switches over 1A, in under 8 msec */
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 0c005e8..44b2019 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -33,17 +33,19 @@
 #include <linux/mtd/partitions.h>
 #include <linux/clk.h>
 #include <linux/export.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
+#include <mach/irqs.h>
 #include <mach/serial.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
 #include <mach/clock.h>
 #include <mach/cdce949.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
 
 #include "davinci.h"
 #include "clock.h"
@@ -750,10 +752,6 @@ static void __init davinci_map_io(void)
 	cdce_clk_init();
 }
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 #define DM646X_EVM_PHY_ID		"davinci_mdio-0:01"
 /*
  * The following EDMA channels/slots are not being used by drivers (for
@@ -790,10 +788,15 @@ static struct edma_rsv_info dm646x_edma_rsv[] = {
 
 static __init void evm_init(void)
 {
+	int ret;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
+	ret = dm646x_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	evm_init_i2c();
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm646x_serial_device);
 	dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
 	dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
 
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 9549d53..cd0f587 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -434,10 +434,6 @@ static void __init mityomapl138_setup_nand(void)
 				 ARRAY_SIZE(mityomapl138_devices));
 }
 
-static struct davinci_uart_config mityomapl138_uart_config __initdata = {
-	.enabled_uarts = 0x7,
-};
-
 static const short mityomap_mii_pins[] = {
 	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
 	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
@@ -517,7 +513,7 @@ static void __init mityomapl138_init(void)
 	if (ret)
 		pr_warning("watchdog registration failed: %d\n", ret);
 
-	davinci_serial_init(&mityomapl138_uart_config);
+	davinci_serial_init(da8xx_serial_device);
 
 	ret = da8xx_register_i2c(0, &mityomap_i2c_0_pdata);
 	if (ret)
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 808233b..bb680af 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -26,17 +26,18 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/mtd/partitions.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
 #include <mach/mux.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
 
 #include "davinci.h"
 
@@ -154,10 +155,6 @@ static struct platform_device *davinci_ntosd2_devices[] __initdata = {
 	&ntosd2_leds_dev,
 };
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 static void __init davinci_ntosd2_map_io(void)
 {
 	dm644x_init();
@@ -173,9 +170,14 @@ static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
 
 static __init void davinci_ntosd2_init(void)
 {
+	int ret;
 	struct clk *aemif_clk;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
+	ret = dm644x_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	aemif_clk = clk_get(NULL, "aemif");
 	clk_prepare_enable(aemif_clk);
 
@@ -198,7 +200,7 @@ static __init void davinci_ntosd2_init(void)
 	platform_add_devices(davinci_ntosd2_devices,
 				ARRAY_SIZE(davinci_ntosd2_devices));
 
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm644x_serial_device);
 	dm644x_init_asp(&dm644x_ntosd2_snd_data);
 
 	soc_info->emac_pdata->phy_id = NEUROS_OSD2_PHY_ID;
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index b8c20de..2aac51d 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -13,10 +13,12 @@
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-davinci.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#include <mach/common.h>
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
 #include <mach/mux.h>
@@ -211,7 +213,7 @@ static int hawk_usb_ocic_notify(da8xx_ocic_handler_t handler)
 		hawk_usb_ocic_handler = handler;
 
 		error = request_irq(irq, omapl138_hawk_usb_ocic_irq,
-					IRQF_DISABLED | IRQF_TRIGGER_RISING |
+					IRQF_TRIGGER_RISING |
 					IRQF_TRIGGER_FALLING,
 					"OHCI over-current indicator", NULL);
 		if (error)
@@ -286,15 +288,15 @@ usb11_setup_oc_fail:
 	gpio_free(DA850_USB1_VBUS_PIN);
 }
 
-static struct davinci_uart_config omapl138_hawk_uart_config __initdata = {
-	.enabled_uarts = 0x7,
-};
-
 static __init void omapl138_hawk_init(void)
 {
 	int ret;
 
-	davinci_serial_init(&omapl138_hawk_uart_config);
+	ret = da850_register_gpio();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
+	davinci_serial_init(da8xx_serial_device);
 
 	omapl138_hawk_config_emac();
 
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 513eee1..d8436014 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -125,10 +125,6 @@ static struct platform_device *davinci_sffsdr_devices[] __initdata = {
 	&davinci_sffsdr_nandflash_device,
 };
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 static void __init davinci_sffsdr_map_io(void)
 {
 	dm644x_init();
@@ -141,7 +137,7 @@ static __init void davinci_sffsdr_init(void)
 	platform_add_devices(davinci_sffsdr_devices,
 			     ARRAY_SIZE(davinci_sffsdr_devices));
 	sffsdr_init_i2c();
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm644x_serial_device);
 	soc_info->emac_pdata->phy_id = SFFSDR_PHY_ID;
 	davinci_setup_usb(0, 0); /* We support only peripheral mode. */
 
diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c
index 36aef3a..f1ac1c9 100644
--- a/arch/arm/mach-davinci/cpuidle.c
+++ b/arch/arm/mach-davinci/cpuidle.c
@@ -65,7 +65,7 @@ static struct cpuidle_driver davinci_idle_driver = {
 	.states[1]		= {
 		.enter			= davinci_enter_idle,
 		.exit_latency		= 10,
-		.target_residency	= 100000,
+		.target_residency	= 10000,
 		.flags			= CPUIDLE_FLAG_TIME_VALID,
 		.name			= "DDR SR",
 		.desc			= "WFI and DDR Self Refresh",
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index abbaf02..0813b51 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -11,6 +11,7 @@
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/clk.h>
+#include <linux/platform_data/gpio-davinci.h>
 
 #include <asm/mach/map.h>
 
@@ -20,7 +21,6 @@
 #include <mach/common.h>
 #include <mach/time.h>
 #include <mach/da8xx.h>
-#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -395,9 +395,9 @@ static struct clk_lookup da830_clks[] = {
 	CLK(NULL,		"tptc0",	&tptc0_clk),
 	CLK(NULL,		"tptc1",	&tptc1_clk),
 	CLK("da830-mmc.0",	NULL,		&mmcsd_clk),
-	CLK(NULL,		"uart0",	&uart0_clk),
-	CLK(NULL,		"uart1",	&uart1_clk),
-	CLK(NULL,		"uart2",	&uart2_clk),
+	CLK("serial8250.0",	NULL,		&uart0_clk),
+	CLK("serial8250.1",	NULL,		&uart1_clk),
+	CLK("serial8250.2",	NULL,		&uart2_clk),
 	CLK("spi_davinci.0",	NULL,		&spi0_clk),
 	CLK("spi_davinci.1",	NULL,		&spi1_clk),
 	CLK(NULL,		"ecap0",	&ecap0_clk),
@@ -417,6 +417,7 @@ static struct clk_lookup da830_clks[] = {
 	CLK(NULL,		"aintc",	&aintc_clk),
 	CLK(NULL,		"secu_mgr",	&secu_mgr_clk),
 	CLK("davinci_emac.1",	NULL,		&emac_clk),
+	CLK("davinci_mdio.0",   "fck",          &emac_clk),
 	CLK(NULL,		"gpio",		&gpio_clk),
 	CLK("i2c_davinci.2",	NULL,		&i2c1_clk),
 	CLK(NULL,		"usb11",	&usb11_clk),
@@ -1150,6 +1151,16 @@ static struct davinci_id da830_ids[] = {
 	},
 };
 
+static struct davinci_gpio_platform_data da830_gpio_platform_data = {
+	.ngpio = 128,
+	.intc_irq_num = DA830_N_CP_INTC_IRQ,
+};
+
+int __init da830_register_gpio(void)
+{
+	return da8xx_register_gpio(&da830_gpio_platform_data);
+}
+
 static struct davinci_timer_instance da830_timer_instance[2] = {
 	{
 		.base		= DA8XX_TIMER64P0_BASE,
@@ -1195,11 +1206,6 @@ static struct davinci_soc_info davinci_soc_info_da830 = {
 	.intc_irq_prios		= da830_default_priorities,
 	.intc_irq_num		= DA830_N_CP_INTC_IRQ,
 	.timer_info		= &da830_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DA8XX_GPIO_BASE,
-	.gpio_num		= 128,
-	.gpio_irq		= IRQ_DA8XX_GPIO0,
-	.serial_dev		= &da8xx_serial_device,
 	.emac_pdata		= &da8xx_emac_pdata,
 };
 
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index a0d4f60..352984e 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -17,6 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/cpufreq.h>
 #include <linux/regulator/consumer.h>
+#include <linux/platform_data/gpio-davinci.h>
 
 #include <asm/mach/map.h>
 
@@ -28,7 +29,6 @@
 #include <mach/da8xx.h>
 #include <mach/cpufreq.h>
 #include <mach/pm.h>
-#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -451,9 +451,9 @@ static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"tpcc1",	&tpcc1_clk),
 	CLK(NULL,		"tptc2",	&tptc2_clk),
 	CLK("pruss_uio",	"pruss",	&pruss_clk),
-	CLK(NULL,		"uart0",	&uart0_clk),
-	CLK(NULL,		"uart1",	&uart1_clk),
-	CLK(NULL,		"uart2",	&uart2_clk),
+	CLK("serial8250.0",	NULL,		&uart0_clk),
+	CLK("serial8250.1",	NULL,		&uart1_clk),
+	CLK("serial8250.2",	NULL,		&uart2_clk),
 	CLK(NULL,		"aintc",	&aintc_clk),
 	CLK(NULL,		"gpio",		&gpio_clk),
 	CLK("i2c_davinci.2",	NULL,		&i2c1_clk),
@@ -461,6 +461,7 @@ static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"arm",		&arm_clk),
 	CLK(NULL,		"rmii",		&rmii_clk),
 	CLK("davinci_emac.1",	NULL,		&emac_clk),
+	CLK("davinci_mdio.0",	"fck",		&emac_clk),
 	CLK("davinci-mcasp.0",	NULL,		&mcasp_clk),
 	CLK("da8xx_lcdc.0",	"fck",		&lcdc_clk),
 	CLK("da830-mmc.0",	NULL,		&mmcsd0_clk),
@@ -1280,6 +1281,16 @@ int __init da850_register_vpif_capture(struct vpif_capture_config
 	return platform_device_register(&da850_vpif_capture_dev);
 }
 
+static struct davinci_gpio_platform_data da850_gpio_platform_data = {
+	.ngpio = 144,
+	.intc_irq_num = DA850_N_CP_INTC_IRQ,
+};
+
+int __init da850_register_gpio(void)
+{
+	return da8xx_register_gpio(&da850_gpio_platform_data);
+}
+
 static struct davinci_soc_info davinci_soc_info_da850 = {
 	.io_desc		= da850_io_desc,
 	.io_desc_num		= ARRAY_SIZE(da850_io_desc),
@@ -1297,11 +1308,6 @@ static struct davinci_soc_info davinci_soc_info_da850 = {
 	.intc_irq_prios		= da850_default_priorities,
 	.intc_irq_num		= DA850_N_CP_INTC_IRQ,
 	.timer_info		= &da850_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DA8XX_GPIO_BASE,
-	.gpio_num		= 144,
-	.gpio_irq		= IRQ_DA8XX_GPIO0,
-	.serial_dev		= &da8xx_serial_device,
 	.emac_pdata		= &da8xx_emac_pdata,
 	.sram_dma		= DA8XX_SHARED_RAM_BASE,
 	.sram_len		= SZ_128K,
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index 961aea8..d2bc574 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -20,13 +20,6 @@
 
 #define DA8XX_NUM_UARTS	3
 
-static void __init da8xx_uart_clk_enable(void)
-{
-	int i;
-	for (i = 0; i < DA8XX_NUM_UARTS; i++)
-		davinci_serial_setup_clk(i, NULL);
-}
-
 static struct of_device_id da8xx_irq_match[] __initdata = {
 	{ .compatible = "ti,cp-intc", .data = cp_intc_of_init, },
 	{ }
@@ -47,6 +40,12 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("ti,da850-ecap", 0x01f07000, "ecap", NULL),
 	OF_DEV_AUXDATA("ti,da850-ecap", 0x01f08000, "ecap", NULL),
 	OF_DEV_AUXDATA("ti,da830-spi", 0x01f0e000, "spi_davinci.1", NULL),
+	OF_DEV_AUXDATA("ns16550a", 0x01c42000, "serial8250.0", NULL),
+	OF_DEV_AUXDATA("ns16550a", 0x01d0c000, "serial8250.1", NULL),
+	OF_DEV_AUXDATA("ns16550a", 0x01d0d000, "serial8250.2", NULL),
+	OF_DEV_AUXDATA("ti,davinci_mdio", 0x01e24000, "davinci_mdio.0", NULL),
+	OF_DEV_AUXDATA("ti,davinci-dm6467-emac", 0x01e20000, "davinci_emac.1",
+		       NULL),
 	{}
 };
 
@@ -57,7 +56,6 @@ static void __init da850_init_machine(void)
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     da850_auxdata_lookup, NULL);
 
-	da8xx_uart_clk_enable();
 }
 
 static const char *da850_boards_compat[] __initdata = {
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index a883043..2eebc43 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -53,6 +53,9 @@ extern void __iomem *davinci_sysmod_base;
 #define DAVINCI_SYSMOD_VIRT(x)	(davinci_sysmod_base + (x))
 void davinci_map_sysmod(void);
 
+#define DAVINCI_GPIO_BASE 0x01C67000
+int davinci_gpio_register(struct resource *res, int size, void *pdata);
+
 /* DM355 base addresses */
 #define DM355_ASYNC_EMIF_CONTROL_BASE	0x01e10000
 #define DM355_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
@@ -82,6 +85,7 @@ void dm355_init_spi0(unsigned chipselect_mask,
 		const struct spi_board_info *info, unsigned len);
 void dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata);
 int dm355_init_video(struct vpfe_config *, struct vpbe_config *);
+int dm355_gpio_register(void);
 
 /* DM365 function declarations */
 void dm365_init(void);
@@ -92,11 +96,13 @@ void dm365_init_rtc(void);
 void dm365_init_spi0(unsigned chipselect_mask,
 			const struct spi_board_info *info, unsigned len);
 int dm365_init_video(struct vpfe_config *, struct vpbe_config *);
+int dm365_gpio_register(void);
 
 /* DM644x function declarations */
 void dm644x_init(void);
 void dm644x_init_asp(struct snd_platform_data *pdata);
 int dm644x_init_video(struct vpfe_config *, struct vpbe_config *);
+int dm644x_gpio_register(void);
 
 /* DM646x function declarations */
 void dm646x_init(void);
@@ -106,4 +112,10 @@ int dm646x_init_edma(struct edma_rsv_info *rsv);
 void dm646x_video_init(void);
 void dm646x_setup_vpif(struct vpif_display_config *,
 		       struct vpif_capture_config *);
+int dm646x_gpio_register(void);
+
+extern struct platform_device dm365_serial_device[];
+extern struct platform_device dm355_serial_device[];
+extern struct platform_device dm644x_serial_device[];
+extern struct platform_device dm646x_serial_device[];
 #endif /*__DAVINCI_H */
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 71a46a3..c46eccb 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -68,7 +68,7 @@
 void __iomem *da8xx_syscfg0_base;
 void __iomem *da8xx_syscfg1_base;
 
-static struct plat_serial8250_port da8xx_serial_pdata[] = {
+static struct plat_serial8250_port da8xx_serial0_pdata[] = {
 	{
 		.mapbase	= DA8XX_UART0_BASE,
 		.irq		= IRQ_DA8XX_UARTINT0,
@@ -78,6 +78,11 @@ static struct plat_serial8250_port da8xx_serial_pdata[] = {
 		.regshift	= 2,
 	},
 	{
+		.flags	= 0,
+	}
+};
+static struct plat_serial8250_port da8xx_serial1_pdata[] = {
+	{
 		.mapbase	= DA8XX_UART1_BASE,
 		.irq		= IRQ_DA8XX_UARTINT1,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -86,6 +91,11 @@ static struct plat_serial8250_port da8xx_serial_pdata[] = {
 		.regshift	= 2,
 	},
 	{
+		.flags	= 0,
+	}
+};
+static struct plat_serial8250_port da8xx_serial2_pdata[] = {
+	{
 		.mapbase	= DA8XX_UART2_BASE,
 		.irq		= IRQ_DA8XX_UARTINT2,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -95,15 +105,33 @@ static struct plat_serial8250_port da8xx_serial_pdata[] = {
 	},
 	{
 		.flags	= 0,
-	},
+	}
 };
 
-struct platform_device da8xx_serial_device = {
-	.name	= "serial8250",
-	.id	= PLAT8250_DEV_PLATFORM,
-	.dev	= {
-		.platform_data	= da8xx_serial_pdata,
+struct platform_device da8xx_serial_device[] = {
+	{
+		.name	= "serial8250",
+		.id	= PLAT8250_DEV_PLATFORM,
+		.dev	= {
+			.platform_data	= da8xx_serial0_pdata,
+		}
 	},
+	{
+		.name	= "serial8250",
+		.id	= PLAT8250_DEV_PLATFORM1,
+		.dev	= {
+			.platform_data	= da8xx_serial1_pdata,
+		}
+	},
+	{
+		.name	= "serial8250",
+		.id	= PLAT8250_DEV_PLATFORM2,
+		.dev	= {
+			.platform_data	= da8xx_serial2_pdata,
+		}
+	},
+	{
+	}
 };
 
 static s8 da8xx_queue_tc_mapping[][2] = {
@@ -453,12 +481,8 @@ int __init da8xx_register_emac(void)
 	ret = platform_device_register(&da8xx_mdio_device);
 	if (ret < 0)
 		return ret;
-	ret = platform_device_register(&da8xx_emac_device);
-	if (ret < 0)
-		return ret;
-	ret = clk_add_alias(NULL, dev_name(&da8xx_mdio_device.dev),
-			    NULL, &da8xx_emac_device.dev);
-	return ret;
+
+	return platform_device_register(&da8xx_emac_device);
 }
 
 static struct resource da830_mcasp1_resources[] = {
@@ -641,6 +665,32 @@ int __init da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata)
 	return platform_device_register(&da8xx_lcdc_device);
 }
 
+static struct resource da8xx_gpio_resources[] = {
+	{ /* registers */
+		.start	= DA8XX_GPIO_BASE,
+		.end	= DA8XX_GPIO_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{ /* interrupt */
+		.start	= IRQ_DA8XX_GPIO0,
+		.end	= IRQ_DA8XX_GPIO8,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device da8xx_gpio_device = {
+	.name		= "davinci_gpio",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(da8xx_gpio_resources),
+	.resource	= da8xx_gpio_resources,
+};
+
+int __init da8xx_register_gpio(void *pdata)
+{
+	da8xx_gpio_device.dev.platform_data = pdata;
+	return platform_device_register(&da8xx_gpio_device);
+}
+
 static struct resource da8xx_mmcsd0_resources[] = {
 	{		/* registers */
 		.start	= DA8XX_MMCSD0_BASE,
@@ -828,14 +878,7 @@ static struct platform_device da8xx_rtc_device = {
 
 int da8xx_register_rtc(void)
 {
-	int ret;
-
-	ret = platform_device_register(&da8xx_rtc_device);
-	if (!ret)
-		/* Atleast on DA850, RTC is a wakeup source */
-		device_init_wakeup(&da8xx_rtc_device.dev, true);
-
-	return ret;
+	return platform_device_register(&da8xx_rtc_device);
 }
 
 static void __iomem *da8xx_ddr2_ctlr_base;
diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c
index 128cb9a..01d8686 100644
--- a/arch/arm/mach-davinci/devices-tnetv107x.c
+++ b/arch/arm/mach-davinci/devices-tnetv107x.c
@@ -126,7 +126,7 @@ static struct platform_device edma_device = {
 	.dev.platform_data = tnetv107x_edma_info,
 };
 
-static struct plat_serial8250_port serial_data[] = {
+static struct plat_serial8250_port serial0_platform_data[] = {
 	{
 		.mapbase	= TNETV107X_UART0_BASE,
 		.irq		= IRQ_TNETV107X_UART0,
@@ -137,6 +137,11 @@ static struct plat_serial8250_port serial_data[] = {
 		.regshift	= 2,
 	},
 	{
+		.flags	= 0,
+	}
+};
+static struct plat_serial8250_port serial1_platform_data[] = {
+	{
 		.mapbase	= TNETV107X_UART1_BASE,
 		.irq		= IRQ_TNETV107X_UART1,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -146,6 +151,11 @@ static struct plat_serial8250_port serial_data[] = {
 		.regshift	= 2,
 	},
 	{
+		.flags	= 0,
+	}
+};
+static struct plat_serial8250_port serial2_platform_data[] = {
+	{
 		.mapbase	= TNETV107X_UART2_BASE,
 		.irq		= IRQ_TNETV107X_UART2,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -156,13 +166,28 @@ static struct plat_serial8250_port serial_data[] = {
 	},
 	{
 		.flags	= 0,
-	},
+	}
 };
 
-struct platform_device tnetv107x_serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev.platform_data	= serial_data,
+
+struct platform_device tnetv107x_serial_device[] = {
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM,
+		.dev.platform_data	= serial0_platform_data,
+	},
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM1,
+		.dev.platform_data	= serial1_platform_data,
+	},
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM2,
+		.dev.platform_data	= serial2_platform_data,
+	},
+	{
+	}
 };
 
 static struct resource mmc0_resources[] = {
@@ -385,7 +410,7 @@ void __init tnetv107x_devices_init(struct tnetv107x_device_info *info)
 	platform_device_register(&tsc_device);
 
 	if (info->serial_config)
-		davinci_serial_init(info->serial_config);
+		davinci_serial_init(tnetv107x_serial_device);
 
 	for (i = 0; i < 2; i++)
 		if (info->mmc_config[i]) {
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 111573c0..3996e98 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -318,6 +318,19 @@ static void davinci_init_wdt(void)
 	platform_device_register(&davinci_wdt_device);
 }
 
+static struct platform_device davinci_gpio_device = {
+	.name	= "davinci_gpio",
+	.id	= -1,
+};
+
+int davinci_gpio_register(struct resource *res, int size, void *pdata)
+{
+	davinci_gpio_device.resource = res;
+	davinci_gpio_device.num_resources = size;
+	davinci_gpio_device.dev.platform_data = pdata;
+	return platform_device_register(&davinci_gpio_device);
+}
+
 /*-------------------------------------------------------------------------*/
 
 /*-------------------------------------------------------------------------*/
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 86100d1..ef9ff1f 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -13,8 +13,10 @@
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-
 #include <linux/spi/spi.h>
+#include <linux/platform_data/edma.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/spi-davinci.h>
 
 #include <asm/mach/map.h>
 
@@ -25,9 +27,6 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <mach/gpio-davinci.h>
-#include <linux/platform_data/edma.h>
 
 #include "davinci.h"
 #include "clock.h"
@@ -357,9 +356,9 @@ static struct clk_lookup dm355_clks[] = {
 	CLK(NULL, "clkout3", &clkout3_clk),
 	CLK(NULL, "arm", &arm_clk),
 	CLK(NULL, "mjcp", &mjcp_clk),
-	CLK(NULL, "uart0", &uart0_clk),
-	CLK(NULL, "uart1", &uart1_clk),
-	CLK(NULL, "uart2", &uart2_clk),
+	CLK("serial8250.0", NULL, &uart0_clk),
+	CLK("serial8250.1", NULL, &uart1_clk),
+	CLK("serial8250.2", NULL, &uart2_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
 	CLK("davinci-mcbsp.0", NULL, &asp0_clk),
 	CLK("davinci-mcbsp.1", NULL, &asp1_clk),
@@ -886,6 +885,30 @@ static struct platform_device dm355_vpbe_dev = {
 	},
 };
 
+static struct resource dm355_gpio_resources[] = {
+	{	/* registers */
+		.start	= DAVINCI_GPIO_BASE,
+		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{	/* interrupt */
+		.start	= IRQ_DM355_GPIOBNK0,
+		.end	= IRQ_DM355_GPIOBNK6,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct davinci_gpio_platform_data dm355_gpio_platform_data = {
+	.ngpio		= 104,
+	.intc_irq_num	= DAVINCI_N_AINTC_IRQ,
+};
+
+int __init dm355_gpio_register(void)
+{
+	return davinci_gpio_register(dm355_gpio_resources,
+				     sizeof(dm355_gpio_resources),
+				     &dm355_gpio_platform_data);
+}
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm355_io_desc[] = {
@@ -922,7 +945,7 @@ static struct davinci_timer_info dm355_timer_info = {
 	.clocksource_id	= T0_TOP,
 };
 
-static struct plat_serial8250_port dm355_serial_platform_data[] = {
+static struct plat_serial8250_port dm355_serial0_platform_data[] = {
 	{
 		.mapbase	= DAVINCI_UART0_BASE,
 		.irq		= IRQ_UARTINT0,
@@ -932,6 +955,11 @@ static struct plat_serial8250_port dm355_serial_platform_data[] = {
 		.regshift	= 2,
 	},
 	{
+		.flags	= 0,
+	}
+};
+static struct plat_serial8250_port dm355_serial1_platform_data[] = {
+	{
 		.mapbase	= DAVINCI_UART1_BASE,
 		.irq		= IRQ_UARTINT1,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -940,6 +968,11 @@ static struct plat_serial8250_port dm355_serial_platform_data[] = {
 		.regshift	= 2,
 	},
 	{
+		.flags	= 0,
+	}
+};
+static struct plat_serial8250_port dm355_serial2_platform_data[] = {
+	{
 		.mapbase	= DM355_UART2_BASE,
 		.irq		= IRQ_DM355_UARTINT2,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -948,16 +981,34 @@ static struct plat_serial8250_port dm355_serial_platform_data[] = {
 		.regshift	= 2,
 	},
 	{
-		.flags		= 0
-	},
+		.flags	= 0,
+	}
 };
 
-static struct platform_device dm355_serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= dm355_serial_platform_data,
+struct platform_device dm355_serial_device[] = {
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM,
+		.dev			= {
+			.platform_data	= dm355_serial0_platform_data,
+		}
+	},
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM1,
+		.dev			= {
+			.platform_data	= dm355_serial1_platform_data,
+		}
 	},
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM2,
+		.dev			= {
+			.platform_data	= dm355_serial2_platform_data,
+		}
+	},
+	{
+	}
 };
 
 static struct davinci_soc_info davinci_soc_info_dm355 = {
@@ -977,11 +1028,6 @@ static struct davinci_soc_info davinci_soc_info_dm355 = {
 	.intc_irq_prios		= dm355_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm355_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DAVINCI_GPIO_BASE,
-	.gpio_num		= 104,
-	.gpio_irq		= IRQ_DM355_GPIOBNK0,
-	.serial_dev		= &dm355_serial_device,
 	.sram_dma		= 0x00010000,
 	.sram_len		= SZ_32K,
 };
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index dad2802..1511a06 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -19,6 +19,9 @@
 #include <linux/dma-mapping.h>
 #include <linux/spi/spi.h>
 #include <linux/platform_data/edma.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/keyscan-davinci.h>
+#include <linux/platform_data/spi-davinci.h>
 
 #include <asm/mach/map.h>
 
@@ -29,9 +32,6 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
-#include <linux/platform_data/keyscan-davinci.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <mach/gpio-davinci.h>
 
 #include "davinci.h"
 #include "clock.h"
@@ -455,8 +455,8 @@ static struct clk_lookup dm365_clks[] = {
 	CLK("vpss", "master", &vpss_master_clk),
 	CLK("vpss", "slave", &vpss_slave_clk),
 	CLK(NULL, "arm", &arm_clk),
-	CLK(NULL, "uart0", &uart0_clk),
-	CLK(NULL, "uart1", &uart1_clk),
+	CLK("serial8250.0", NULL, &uart0_clk),
+	CLK("serial8250.1", NULL, &uart1_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
 	CLK("da830-mmc.0", NULL, &mmcsd0_clk),
 	CLK("da830-mmc.1", NULL, &mmcsd1_clk),
@@ -477,6 +477,7 @@ static struct clk_lookup dm365_clks[] = {
 	CLK(NULL, "timer3", &timer3_clk),
 	CLK(NULL, "usb", &usb_clk),
 	CLK("davinci_emac.1", NULL, &emac_clk),
+	CLK("davinci_mdio.0", "fck", &emac_clk),
 	CLK("davinci_voicecodec", NULL, &voicecodec_clk),
 	CLK("davinci-mcbsp", NULL, &asp0_clk),
 	CLK(NULL, "rto", &rto_clk),
@@ -697,6 +698,32 @@ void __init dm365_init_spi0(unsigned chipselect_mask,
 	platform_device_register(&dm365_spi0_device);
 }
 
+static struct resource dm365_gpio_resources[] = {
+	{	/* registers */
+		.start	= DAVINCI_GPIO_BASE,
+		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{	/* interrupt */
+		.start	= IRQ_DM365_GPIO0,
+		.end	= IRQ_DM365_GPIO7,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct davinci_gpio_platform_data dm365_gpio_platform_data = {
+	.ngpio		= 104,
+	.intc_irq_num	= DAVINCI_N_AINTC_IRQ,
+	.gpio_unbanked	= 8,
+};
+
+int __init dm365_gpio_register(void)
+{
+	return davinci_gpio_register(dm365_gpio_resources,
+				     sizeof(dm365_gpio_resources),
+				     &dm365_gpio_platform_data);
+}
+
 static struct emac_platform_data dm365_emac_pdata = {
 	.ctrl_reg_offset	= DM365_EMAC_CNTRL_OFFSET,
 	.ctrl_mod_reg_offset	= DM365_EMAC_CNTRL_MOD_OFFSET,
@@ -1041,7 +1068,7 @@ static struct davinci_timer_info dm365_timer_info = {
 
 #define DM365_UART1_BASE	(IO_PHYS + 0x106000)
 
-static struct plat_serial8250_port dm365_serial_platform_data[] = {
+static struct plat_serial8250_port dm365_serial0_platform_data[] = {
 	{
 		.mapbase	= DAVINCI_UART0_BASE,
 		.irq		= IRQ_UARTINT0,
@@ -1051,6 +1078,11 @@ static struct plat_serial8250_port dm365_serial_platform_data[] = {
 		.regshift	= 2,
 	},
 	{
+		.flags	= 0,
+	}
+};
+static struct plat_serial8250_port dm365_serial1_platform_data[] = {
+	{
 		.mapbase	= DM365_UART1_BASE,
 		.irq		= IRQ_UARTINT1,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -1059,16 +1091,27 @@ static struct plat_serial8250_port dm365_serial_platform_data[] = {
 		.regshift	= 2,
 	},
 	{
-		.flags		= 0
-	},
+		.flags	= 0,
+	}
 };
 
-static struct platform_device dm365_serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= dm365_serial_platform_data,
+struct platform_device dm365_serial_device[] = {
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM,
+		.dev			= {
+			.platform_data	= dm365_serial0_platform_data,
+		}
+	},
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM1,
+		.dev			= {
+			.platform_data	= dm365_serial1_platform_data,
+		}
 	},
+	{
+	}
 };
 
 static struct davinci_soc_info davinci_soc_info_dm365 = {
@@ -1088,12 +1131,6 @@ static struct davinci_soc_info davinci_soc_info_dm365 = {
 	.intc_irq_prios		= dm365_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm365_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DAVINCI_GPIO_BASE,
-	.gpio_num		= 104,
-	.gpio_irq		= IRQ_DM365_GPIO0,
-	.gpio_unbanked		= 8,	/* really 16 ... skip muxed GPIOs */
-	.serial_dev		= &dm365_serial_device,
 	.emac_pdata		= &dm365_emac_pdata,
 	.sram_dma		= 0x00010000,
 	.sram_len		= SZ_32K,
@@ -1407,8 +1444,6 @@ static int __init dm365_init_devices(void)
 
 	platform_device_register(&dm365_mdio_device);
 	platform_device_register(&dm365_emac_device);
-	clk_add_alias(NULL, dev_name(&dm365_mdio_device.dev),
-		      NULL, &dm365_emac_device.dev);
 
 	return 0;
 }
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index a49d182..143a321 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -13,6 +13,7 @@
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/edma.h>
+#include <linux/platform_data/gpio-davinci.h>
 
 #include <asm/mach/map.h>
 
@@ -23,7 +24,6 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
-#include <mach/gpio-davinci.h>
 
 #include "davinci.h"
 #include "clock.h"
@@ -303,10 +303,11 @@ static struct clk_lookup dm644x_clks[] = {
 	CLK("vpss", "master", &vpss_master_clk),
 	CLK("vpss", "slave", &vpss_slave_clk),
 	CLK(NULL, "arm", &arm_clk),
-	CLK(NULL, "uart0", &uart0_clk),
-	CLK(NULL, "uart1", &uart1_clk),
-	CLK(NULL, "uart2", &uart2_clk),
+	CLK("serial8250.0", NULL, &uart0_clk),
+	CLK("serial8250.1", NULL, &uart1_clk),
+	CLK("serial8250.2", NULL, &uart2_clk),
 	CLK("davinci_emac.1", NULL, &emac_clk),
+	CLK("davinci_mdio.0", "fck", &emac_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
 	CLK("palm_bk3710", NULL, &ide_clk),
 	CLK("davinci-mcbsp", NULL, &asp_clk),
@@ -770,6 +771,30 @@ static struct platform_device dm644x_vpbe_dev = {
 	},
 };
 
+static struct resource dm644_gpio_resources[] = {
+	{	/* registers */
+		.start	= DAVINCI_GPIO_BASE,
+		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{	/* interrupt */
+		.start	= IRQ_GPIOBNK0,
+		.end	= IRQ_GPIOBNK4,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct davinci_gpio_platform_data dm644_gpio_platform_data = {
+	.ngpio		= 71,
+	.intc_irq_num	= DAVINCI_N_AINTC_IRQ,
+};
+
+int __init dm644x_gpio_register(void)
+{
+	return davinci_gpio_register(dm644_gpio_resources,
+				     sizeof(dm644_gpio_resources),
+				     &dm644_gpio_platform_data);
+}
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm644x_io_desc[] = {
@@ -813,7 +838,7 @@ static struct davinci_timer_info dm644x_timer_info = {
 	.clocksource_id	= T0_TOP,
 };
 
-static struct plat_serial8250_port dm644x_serial_platform_data[] = {
+static struct plat_serial8250_port dm644x_serial0_platform_data[] = {
 	{
 		.mapbase	= DAVINCI_UART0_BASE,
 		.irq		= IRQ_UARTINT0,
@@ -823,6 +848,11 @@ static struct plat_serial8250_port dm644x_serial_platform_data[] = {
 		.regshift	= 2,
 	},
 	{
+		.flags	= 0,
+	}
+};
+static struct plat_serial8250_port dm644x_serial1_platform_data[] = {
+	{
 		.mapbase	= DAVINCI_UART1_BASE,
 		.irq		= IRQ_UARTINT1,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -831,6 +861,11 @@ static struct plat_serial8250_port dm644x_serial_platform_data[] = {
 		.regshift	= 2,
 	},
 	{
+		.flags	= 0,
+	}
+};
+static struct plat_serial8250_port dm644x_serial2_platform_data[] = {
+	{
 		.mapbase	= DAVINCI_UART2_BASE,
 		.irq		= IRQ_UARTINT2,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -839,16 +874,34 @@ static struct plat_serial8250_port dm644x_serial_platform_data[] = {
 		.regshift	= 2,
 	},
 	{
-		.flags		= 0
-	},
+		.flags	= 0,
+	}
 };
 
-static struct platform_device dm644x_serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= dm644x_serial_platform_data,
+struct platform_device dm644x_serial_device[] = {
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM,
+		.dev			= {
+			.platform_data	= dm644x_serial0_platform_data,
+		}
+	},
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM1,
+		.dev			= {
+			.platform_data	= dm644x_serial1_platform_data,
+		}
 	},
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM2,
+		.dev			= {
+			.platform_data	= dm644x_serial2_platform_data,
+		}
+	},
+	{
+	}
 };
 
 static struct davinci_soc_info davinci_soc_info_dm644x = {
@@ -868,11 +921,6 @@ static struct davinci_soc_info davinci_soc_info_dm644x = {
 	.intc_irq_prios 	= dm644x_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm644x_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DAVINCI_GPIO_BASE,
-	.gpio_num		= 71,
-	.gpio_irq		= IRQ_GPIOBNK0,
-	.serial_dev		= &dm644x_serial_device,
 	.emac_pdata		= &dm644x_emac_pdata,
 	.sram_dma		= 0x00008000,
 	.sram_len		= SZ_16K,
@@ -923,8 +971,6 @@ static int __init dm644x_init_devices(void)
 
 	platform_device_register(&dm644x_mdio_device);
 	platform_device_register(&dm644x_emac_device);
-	clk_add_alias(NULL, dev_name(&dm644x_mdio_device.dev),
-		      NULL, &dm644x_emac_device.dev);
 
 	return 0;
 }
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index d1259e8..2a73f29 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -14,6 +14,7 @@
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/edma.h>
+#include <linux/platform_data/gpio-davinci.h>
 
 #include <asm/mach/map.h>
 
@@ -24,7 +25,6 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
-#include <mach/gpio-davinci.h>
 
 #include "davinci.h"
 #include "clock.h"
@@ -342,15 +342,16 @@ static struct clk_lookup dm646x_clks[] = {
 	CLK(NULL, "edma_tc1", &edma_tc1_clk),
 	CLK(NULL, "edma_tc2", &edma_tc2_clk),
 	CLK(NULL, "edma_tc3", &edma_tc3_clk),
-	CLK(NULL, "uart0", &uart0_clk),
-	CLK(NULL, "uart1", &uart1_clk),
-	CLK(NULL, "uart2", &uart2_clk),
+	CLK("serial8250.0", NULL, &uart0_clk),
+	CLK("serial8250.1", NULL, &uart1_clk),
+	CLK("serial8250.2", NULL, &uart2_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
 	CLK(NULL, "gpio", &gpio_clk),
 	CLK("davinci-mcasp.0", NULL, &mcasp0_clk),
 	CLK("davinci-mcasp.1", NULL, &mcasp1_clk),
 	CLK(NULL, "aemif", &aemif_clk),
 	CLK("davinci_emac.1", NULL, &emac_clk),
+	CLK("davinci_mdio.0", "fck", &emac_clk),
 	CLK(NULL, "pwm0", &pwm0_clk),
 	CLK(NULL, "pwm1", &pwm1_clk),
 	CLK(NULL, "timer0", &timer0_clk),
@@ -747,6 +748,30 @@ static struct platform_device vpif_capture_dev = {
 	.num_resources	= ARRAY_SIZE(vpif_capture_resource),
 };
 
+static struct resource dm646x_gpio_resources[] = {
+	{	/* registers */
+		.start	= DAVINCI_GPIO_BASE,
+		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{	/* interrupt */
+		.start	= IRQ_DM646X_GPIOBNK0,
+		.end	= IRQ_DM646X_GPIOBNK2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct davinci_gpio_platform_data dm646x_gpio_platform_data = {
+	.ngpio		= 43,
+	.intc_irq_num	= DAVINCI_N_AINTC_IRQ,
+};
+
+int __init dm646x_gpio_register(void)
+{
+	return davinci_gpio_register(dm646x_gpio_resources,
+				     sizeof(dm646x_gpio_resources),
+				     &dm646x_gpio_platform_data);
+}
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm646x_io_desc[] = {
@@ -790,7 +815,7 @@ static struct davinci_timer_info dm646x_timer_info = {
 	.clocksource_id	= T0_TOP,
 };
 
-static struct plat_serial8250_port dm646x_serial_platform_data[] = {
+static struct plat_serial8250_port dm646x_serial0_platform_data[] = {
 	{
 		.mapbase	= DAVINCI_UART0_BASE,
 		.irq		= IRQ_UARTINT0,
@@ -800,6 +825,11 @@ static struct plat_serial8250_port dm646x_serial_platform_data[] = {
 		.regshift	= 2,
 	},
 	{
+		.flags	= 0,
+	}
+};
+static struct plat_serial8250_port dm646x_serial1_platform_data[] = {
+	{
 		.mapbase	= DAVINCI_UART1_BASE,
 		.irq		= IRQ_UARTINT1,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -808,6 +838,11 @@ static struct plat_serial8250_port dm646x_serial_platform_data[] = {
 		.regshift	= 2,
 	},
 	{
+		.flags	= 0,
+	}
+};
+static struct plat_serial8250_port dm646x_serial2_platform_data[] = {
+	{
 		.mapbase	= DAVINCI_UART2_BASE,
 		.irq		= IRQ_DM646X_UARTINT2,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
@@ -816,16 +851,34 @@ static struct plat_serial8250_port dm646x_serial_platform_data[] = {
 		.regshift	= 2,
 	},
 	{
-		.flags		= 0
-	},
+		.flags	= 0,
+	}
 };
 
-static struct platform_device dm646x_serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= dm646x_serial_platform_data,
+struct platform_device dm646x_serial_device[] = {
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM,
+		.dev			= {
+			.platform_data	= dm646x_serial0_platform_data,
+		}
 	},
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM1,
+		.dev			= {
+			.platform_data	= dm646x_serial1_platform_data,
+		}
+	},
+	{
+		.name			= "serial8250",
+		.id			= PLAT8250_DEV_PLATFORM2,
+		.dev			= {
+			.platform_data	= dm646x_serial2_platform_data,
+		}
+	},
+	{
+	}
 };
 
 static struct davinci_soc_info davinci_soc_info_dm646x = {
@@ -845,11 +898,6 @@ static struct davinci_soc_info davinci_soc_info_dm646x = {
 	.intc_irq_prios		= dm646x_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm646x_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DAVINCI_GPIO_BASE,
-	.gpio_num		= 43, /* Only 33 usable */
-	.gpio_irq		= IRQ_DM646X_GPIOBNK0,
-	.serial_dev		= &dm646x_serial_device,
 	.emac_pdata		= &dm646x_emac_pdata,
 	.sram_dma		= 0x10010000,
 	.sram_len		= SZ_32K,
@@ -913,8 +961,6 @@ static int __init dm646x_init_devices(void)
 
 	platform_device_register(&dm646x_mdio_device);
 	platform_device_register(&dm646x_emac_device);
-	clk_add_alias(NULL, dev_name(&dm646x_mdio_device.dev),
-		      NULL, &dm646x_emac_device.dev);
 
 	return 0;
 }
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index cce316b..0b3c169 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -72,7 +72,6 @@ struct davinci_soc_info {
 	unsigned			gpio_unbanked;
 	struct davinci_gpio_controller	*gpio_ctlrs;
 	int				gpio_ctlrs_num;
-	struct platform_device		*serial_dev;
 	struct emac_platform_data	*emac_pdata;
 	dma_addr_t			sram_dma;
 	unsigned			sram_len;
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 7b41a5e..39e58b4 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -97,6 +97,7 @@ int da8xx_register_mmcsd0(struct davinci_mmc_config *config);
 int da850_register_mmcsd1(struct davinci_mmc_config *config);
 void da8xx_register_mcasp(int id, struct snd_platform_data *pdata);
 int da8xx_register_rtc(void);
+int da8xx_register_gpio(void *pdata);
 int da850_register_cpufreq(char *async_clk);
 int da8xx_register_cpuidle(void);
 void __iomem *da8xx_get_mem_ctlr(void);
@@ -110,8 +111,10 @@ int da850_register_vpif_capture
 void da8xx_restart(enum reboot_mode mode, const char *cmd);
 void da8xx_rproc_reserve_cma(void);
 int da8xx_register_rproc(void);
+int da850_register_gpio(void);
+int da830_register_gpio(void);
 
-extern struct platform_device da8xx_serial_device;
+extern struct platform_device da8xx_serial_device[];
 extern struct emac_platform_data da8xx_emac_pdata;
 extern struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata;
 extern struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata;
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
deleted file mode 100644
index b18b8eb..0000000
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Debugging macro for DaVinci
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/* Modifications
- * Jan 2009	Chaithrika U S	Added senduart, busyuart, waituart
- *				macros, based on debug-8250.S file
- *				but using 32-bit accesses required for
- *                              some davinci devices.
- */
-
-#include <linux/serial_reg.h>
-
-#include <mach/serial.h>
-
-#define UART_SHIFT	2
-
-#if defined(CONFIG_DEBUG_DAVINCI_DMx_UART0)
-#define UART_BASE	DAVINCI_UART0_BASE
-#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART1)
-#define UART_BASE	DA8XX_UART1_BASE
-#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART2)
-#define UART_BASE	DA8XX_UART2_BASE
-#elif defined(CONFIG_DEBUG_DAVINCI_TNETV107X_UART1)
-#define UART_BASE	TNETV107X_UART2_BASE
-#define UART_VIRTBASE	TNETV107X_UART2_VIRT
-#else
-#error "Select a specifc port for DEBUG_LL"
-#endif
-
-#ifndef UART_VIRTBASE
-#define UART_VIRTBASE	IO_ADDRESS(UART_BASE)
-#endif
-
-		.macro addruart, rp, rv, tmp
-		ldr	\rp, =UART_BASE
-		ldr	\rv, =UART_VIRTBASE
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #UART_TX << UART_SHIFT]
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #UART_LSR << UART_SHIFT]
-		and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
-		teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
-		bne	1002b
-		.endm
-
-		.macro	waituart,rd,rx
-#ifdef FLOW_CONTROL
-1001:		ldr	\rd, [\rx, #UART_MSR << UART_SHIFT]
-		tst	\rd, #UART_MSR_CTS
-		beq	1001b
-#endif
-		.endm
-
diff --git a/arch/arm/mach-davinci/include/mach/gpio-davinci.h b/arch/arm/mach-davinci/include/mach/gpio-davinci.h
deleted file mode 100644
index 1fdd1fd..0000000
--- a/arch/arm/mach-davinci/include/mach/gpio-davinci.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * TI DaVinci GPIO Support
- *
- * Copyright (c) 2006 David Brownell
- * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef	__DAVINCI_DAVINCI_GPIO_H
-#define	__DAVINCI_DAVINCI_GPIO_H
-
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
-#include <asm-generic/gpio.h>
-
-#include <mach/irqs.h>
-#include <mach/common.h>
-
-#define DAVINCI_GPIO_BASE 0x01C67000
-
-enum davinci_gpio_type {
-	GPIO_TYPE_DAVINCI = 0,
-	GPIO_TYPE_TNETV107X,
-};
-
-/*
- * basic gpio routines
- *
- * board-specific init should be done by arch/.../.../board-XXX.c (maybe
- * initializing banks together) rather than boot loaders; kexec() won't
- * go through boot loaders.
- *
- * the gpio clock will be turned on when gpios are used, and you may also
- * need to pay attention to PINMUX registers to be sure those pins are
- * used as gpios, not with other peripherals.
- *
- * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1).  For documentation,
- * and maybe for later updates, code may write GPIO(N).  These may be
- * all 1.8V signals, all 3.3V ones, or a mix of the two.  A given chip
- * may not support all the GPIOs in that range.
- *
- * GPIOs can also be on external chips, numbered after the ones built-in
- * to the DaVinci chip.  For now, they won't be usable as IRQ sources.
- */
-#define	GPIO(X)		(X)		/* 0 <= X <= (DAVINCI_N_GPIO - 1) */
-
-/* Convert GPIO signal to GPIO pin number */
-#define GPIO_TO_PIN(bank, gpio)	(16 * (bank) + (gpio))
-
-struct davinci_gpio_controller {
-	struct gpio_chip	chip;
-	int			irq_base;
-	spinlock_t		lock;
-	void __iomem		*regs;
-	void __iomem		*set_data;
-	void __iomem		*clr_data;
-	void __iomem		*in_data;
-};
-
-/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
- * with constant parameters; or in outlined code they execute at runtime.
- *
- * You'd access the controller directly when reading or writing more than
- * one gpio value at a time, and to support wired logic where the value
- * being driven by the cpu need not match the value read back.
- *
- * These are NOT part of the cross-platform GPIO interface
- */
-static inline struct davinci_gpio_controller *
-__gpio_to_controller(unsigned gpio)
-{
-	struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs;
-	int index = gpio / 32;
-
-	if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num)
-		return NULL;
-
-	return ctlrs + index;
-}
-
-static inline u32 __gpio_mask(unsigned gpio)
-{
-	return 1 << (gpio % 32);
-}
-
-#endif	/* __DAVINCI_DAVINCI_GPIO_H */
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
deleted file mode 100644
index 960e9de..0000000
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * TI DaVinci GPIO Support
- *
- * Copyright (c) 2006 David Brownell
- * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef	__DAVINCI_GPIO_H
-#define	__DAVINCI_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#define __ARM_GPIOLIB_COMPLEX
-
-/* The inline versions use the static inlines in the driver header */
-#include "gpio-davinci.h"
-
-/*
- * The get/set/clear functions will inline when called with constant
- * parameters referencing built-in GPIOs, for low-overhead bitbanging.
- *
- * gpio_set_value() will inline only on traditional Davinci style controllers
- * with distinct set/clear registers.
- *
- * Otherwise, calls with variable parameters or referencing external
- * GPIOs (e.g. on GPIO expander chips) use outlined functions.
- */
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (__builtin_constant_p(value) && gpio < davinci_soc_info.gpio_num) {
-		struct davinci_gpio_controller *ctlr;
-		u32				mask;
-
-		ctlr = __gpio_to_controller(gpio);
-
-		if (ctlr->set_data != ctlr->clr_data) {
-			mask = __gpio_mask(gpio);
-			if (value)
-				__raw_writel(mask, ctlr->set_data);
-			else
-				__raw_writel(mask, ctlr->clr_data);
-			return;
-		}
-	}
-
-	__gpio_set_value(gpio, value);
-}
-
-/* Returns zero or nonzero; works for gpios configured as inputs OR
- * as outputs, at least for built-in GPIOs.
- *
- * NOTE: for built-in GPIOs, changes in reported values are synchronized
- * to the GPIO clock.  This is easily seen after calling gpio_set_value()
- * and then immediately gpio_get_value(), where the gpio_get_value() will
- * return the old value until the GPIO clock ticks and the new value gets
- * latched.
- */
-static inline int gpio_get_value(unsigned gpio)
-{
-	struct davinci_gpio_controller *ctlr;
-
-	if (!__builtin_constant_p(gpio) || gpio >= davinci_soc_info.gpio_num)
-		return __gpio_get_value(gpio);
-
-	ctlr = __gpio_to_controller(gpio);
-	return __gpio_mask(gpio) & __raw_readl(ctlr->in_data);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
-	if (__builtin_constant_p(gpio) && gpio < davinci_soc_info.gpio_num)
-		return 0;
-	else
-		return __gpio_cansleep(gpio);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	/* don't support the reverse mapping */
-	return -ENOSYS;
-}
-
-#endif				/* __DAVINCI_GPIO_H */
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index 62ad300..ce402cd 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -37,13 +37,9 @@
 #define UART_DM646X_SCR_TX_WATERMARK	0x08
 
 #ifndef __ASSEMBLY__
-struct davinci_uart_config {
-	/* Bit field of UARTs present; bit 0 --> UART0 */
-	unsigned int enabled_uarts;
-};
+#include <linux/platform_device.h>
 
-extern int davinci_serial_init(struct davinci_uart_config *);
-extern int davinci_serial_setup_clk(unsigned instance, unsigned int *rate);
+extern int davinci_serial_init(struct platform_device *);
 #endif
 
 #endif /* __ASM_ARCH_SERIAL_H */
diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h
index 16314c6..494fcf5 100644
--- a/arch/arm/mach-davinci/include/mach/tnetv107x.h
+++ b/arch/arm/mach-davinci/include/mach/tnetv107x.h
@@ -42,7 +42,6 @@
 #include <mach/serial.h>
 
 struct tnetv107x_device_info {
-	struct davinci_uart_config	*serial_config;
 	struct davinci_mmc_config	*mmc_config[2];  /* 2 controllers */
 	struct davinci_nand_pdata	*nand_config[4]; /* 4 chipsels */
 	struct matrix_keypad_platform_data *keypad_config;
@@ -50,7 +49,7 @@ struct tnetv107x_device_info {
 };
 
 extern struct platform_device tnetv107x_wdt_device;
-extern struct platform_device tnetv107x_serial_device;
+extern struct platform_device tnetv107x_serial_device[];
 
 extern void tnetv107x_init(void);
 extern void tnetv107x_devices_init(struct tnetv107x_device_info *);
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index f262581..5e93a73 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -70,49 +70,36 @@ static void __init davinci_serial_reset(struct plat_serial8250_port *p)
 				 UART_DM646X_SCR_TX_WATERMARK);
 }
 
-/* Enable UART clock and obtain its rate */
-int __init davinci_serial_setup_clk(unsigned instance, unsigned int *rate)
+int __init davinci_serial_init(struct platform_device *serial_dev)
 {
-	char name[16];
+	int i, ret = 0;
+	struct device *dev;
+	struct plat_serial8250_port *p;
 	struct clk *clk;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	struct device *dev = &soc_info->serial_dev->dev;
-
-	sprintf(name, "uart%d", instance);
-	clk = clk_get(dev, name);
-	if (IS_ERR(clk)) {
-		pr_err("%s:%d: failed to get UART%d clock\n",
-					__func__, __LINE__, instance);
-		return PTR_ERR(clk);
-	}
-
-	clk_prepare_enable(clk);
-
-	if (rate)
-		*rate = clk_get_rate(clk);
-
-	return 0;
-}
-
-int __init davinci_serial_init(struct davinci_uart_config *info)
-{
-	int i, ret;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	struct device *dev = &soc_info->serial_dev->dev;
-	struct plat_serial8250_port *p = dev->platform_data;
 
 	/*
 	 * Make sure the serial ports are muxed on at this point.
 	 * You have to mux them off in device drivers later on if not needed.
 	 */
-	for (i = 0; p->flags; i++, p++) {
-		if (!(info->enabled_uarts & (1 << i)))
-			continue;
+	for (i = 0; serial_dev[i].dev.platform_data != NULL; i++) {
+		dev = &serial_dev[i].dev;
+		p = dev->platform_data;
 
-		ret = davinci_serial_setup_clk(i, &p->uartclk);
+		ret = platform_device_register(&serial_dev[i]);
 		if (ret)
 			continue;
 
+		clk = clk_get(dev, NULL);
+		if (IS_ERR(clk)) {
+			pr_err("%s:%d: failed to get UART%d clock\n",
+			       __func__, __LINE__, i);
+			continue;
+		}
+
+		clk_prepare_enable(clk);
+
+		p->uartclk = clk_get_rate(clk);
+
 		if (!p->membase && p->mapbase) {
 			p->membase = ioremap(p->mapbase, SZ_4K);
 
@@ -125,6 +112,5 @@ int __init davinci_serial_init(struct davinci_uart_config *info)
 		if (p->membase && p->type != PORT_AR7)
 			davinci_serial_reset(p);
 	}
-
-	return platform_device_register(soc_info->serial_dev);
+	return ret;
 }
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 7a55b5c..56c6eb5 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -181,7 +181,7 @@ static struct timer_s timers[] = {
 		.name      = "clockevent",
 		.opts      = TIMER_OPTS_DISABLED,
 		.irqaction = {
-			.flags   = IRQF_DISABLED | IRQF_TIMER,
+			.flags   = IRQF_TIMER,
 			.handler = timer_interrupt,
 		}
 	},
@@ -190,7 +190,7 @@ static struct timer_s timers[] = {
 		.period     = ~0,
 		.opts       = TIMER_OPTS_PERIODIC,
 		.irqaction = {
-			.flags   = IRQF_DISABLED | IRQF_TIMER,
+			.flags   = IRQF_TIMER,
 			.handler = freerun_interrupt,
 		}
 	},
@@ -331,7 +331,6 @@ static void davinci_set_mode(enum clock_event_mode mode,
 
 static struct clock_event_device clockevent_davinci = {
 	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
 	.set_next_event	= davinci_set_next_event,
 	.set_mode	= davinci_set_mode,
 };
@@ -397,14 +396,10 @@ void __init davinci_timer_init(void)
 
 	/* setup clockevent */
 	clockevent_davinci.name = id_to_name[timers[TID_CLOCKEVENT].id];
-	clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC,
-					 clockevent_davinci.shift);
-	clockevent_davinci.max_delta_ns =
-		clockevent_delta2ns(0xfffffffe, &clockevent_davinci);
-	clockevent_davinci.min_delta_ns = 50000; /* 50 usec */
 
 	clockevent_davinci.cpumask = cpumask_of(0);
-	clockevents_register_device(&clockevent_davinci);
+	clockevents_config_and_register(&clockevent_davinci,
+					davinci_clock_tick_rate, 1, 0xfffffffe);
 
 	for (i=0; i< ARRAY_SIZE(timers); i++)
 		timer32_config(&timers[i]);
diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c
index 4545667..f4d7fbb 100644
--- a/arch/arm/mach-davinci/tnetv107x.c
+++ b/arch/arm/mach-davinci/tnetv107x.c
@@ -264,7 +264,7 @@ static struct clk_lookup clks[] = {
 	CLK(NULL,		"clk_chipcfg",		&clk_chipcfg),
 	CLK("tnetv107x-ts.0",	NULL,			&clk_tsc),
 	CLK(NULL,		"clk_rom",		&clk_rom),
-	CLK(NULL,		"uart2",		&clk_uart2),
+	CLK("serial8250.2",     NULL,			&clk_uart2),
 	CLK(NULL,		"clk_pktsec",		&clk_pktsec),
 	CLK("tnetv107x-rng.0",	NULL,			&clk_rng),
 	CLK("tnetv107x-pka.0",	NULL,			&clk_pka),
@@ -274,8 +274,8 @@ static struct clk_lookup clks[] = {
 	CLK(NULL,		"clk_gpio",		&clk_gpio),
 	CLK(NULL,		"clk_mdio",		&clk_mdio),
 	CLK("dm6441-mmc.0",	NULL,			&clk_sdio0),
-	CLK(NULL,		"uart0",		&clk_uart0),
-	CLK(NULL,		"uart1",		&clk_uart1),
+	CLK("serial8250.0",	NULL,			&clk_uart0),
+	CLK("serial8250.1",	NULL,			&clk_uart1),
 	CLK(NULL,		"timer0",		&clk_timer0),
 	CLK(NULL,		"timer1",		&clk_timer1),
 	CLK("tnetv107x_wdt.0",	NULL,			&clk_wdt_arm),
@@ -757,7 +757,7 @@ static struct davinci_soc_info tnetv107x_soc_info = {
 	.gpio_type		= GPIO_TYPE_TNETV107X,
 	.gpio_num		= TNETV107X_N_GPIO,
 	.timer_info		= &timer_info,
-	.serial_dev		= &tnetv107x_serial_device,
+	.serial_dev		= tnetv107x_serial_device,
 };
 
 void __init tnetv107x_init(void)
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
index dff7b2f..0bc7cdf 100644
--- a/arch/arm/mach-dove/Kconfig
+++ b/arch/arm/mach-dove/Kconfig
@@ -23,6 +23,8 @@ config MACH_CM_A510
 config MACH_DOVE_DT
 	bool "Marvell Dove Flattened Device Tree"
 	select DOVE_CLK
+	select ORION_IRQCHIP
+	select ORION_TIMER
 	select REGULATOR
 	select REGULATOR_FIXED_VOLTAGE
 	select USE_OF
diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile
index 4d9d2ff..cbc5c06 100644
--- a/arch/arm/mach-dove/Makefile
+++ b/arch/arm/mach-dove/Makefile
@@ -1,5 +1,5 @@
-obj-y				+= common.o irq.o
-obj-$(CONFIG_DOVE_LEGACY)	+= mpp.o
+obj-y				+= common.o
+obj-$(CONFIG_DOVE_LEGACY)	+= irq.o mpp.o
 obj-$(CONFIG_PCI)		+= pcie.o
 obj-$(CONFIG_MACH_DOVE_DB)	+= dove-db-setup.o
 obj-$(CONFIG_MACH_DOVE_DT)	+= board-dt.o
diff --git a/arch/arm/mach-dove/board-dt.c b/arch/arm/mach-dove/board-dt.c
index f3755ac..49fa9ab 100644
--- a/arch/arm/mach-dove/board-dt.c
+++ b/arch/arm/mach-dove/board-dt.c
@@ -12,50 +12,13 @@
 #include <linux/clk-provider.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <linux/platform_data/usb-ehci-orion.h>
 #include <asm/hardware/cache-tauros2.h>
 #include <asm/mach/arch.h>
+#include <mach/dove.h>
 #include <mach/pm.h>
 #include <plat/common.h>
-#include <plat/irq.h>
 #include "common.h"
 
-/*
- * There are still devices that doesn't even know about DT,
- * get clock gates here and add a clock lookup.
- */
-static void __init dove_legacy_clk_init(void)
-{
-	struct device_node *np = of_find_compatible_node(NULL, NULL,
-					 "marvell,dove-gating-clock");
-	struct of_phandle_args clkspec;
-
-	clkspec.np = np;
-	clkspec.args_count = 1;
-
-	clkspec.args[0] = CLOCK_GATING_BIT_GBE;
-	orion_clkdev_add(NULL, "mv643xx_eth_port.0",
-			 of_clk_get_from_provider(&clkspec));
-
-	clkspec.args[0] = CLOCK_GATING_BIT_PCIE0;
-	orion_clkdev_add("0", "pcie",
-			 of_clk_get_from_provider(&clkspec));
-
-	clkspec.args[0] = CLOCK_GATING_BIT_PCIE1;
-	orion_clkdev_add("1", "pcie",
-			 of_clk_get_from_provider(&clkspec));
-}
-
-static void __init dove_of_clk_init(void)
-{
-	of_clk_init(NULL);
-	dove_legacy_clk_init();
-}
-
-static struct mv643xx_eth_platform_data dove_dt_ge00_data = {
-	.phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT,
-};
-
 static void __init dove_dt_init(void)
 {
 	pr_info("Dove 88AP510 SoC\n");
@@ -63,15 +26,7 @@ static void __init dove_dt_init(void)
 #ifdef CONFIG_CACHE_TAUROS2
 	tauros2_init(0);
 #endif
-	dove_setup_cpu_wins();
-
-	/* Setup root of clk tree */
-	dove_of_clk_init();
-
-	/* Internal devices not ported to DT yet */
-	dove_ge00_init(&dove_dt_ge00_data);
-	dove_pcie_init(1, 1);
-
+	BUG_ON(mvebu_mbus_dt_init());
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
@@ -82,9 +37,6 @@ static const char * const dove_dt_board_compat[] = {
 
 DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
 	.map_io		= dove_map_io,
-	.init_early	= dove_init_early,
-	.init_irq	= orion_dt_init_irq,
-	.init_time	= dove_timer_init,
 	.init_machine	= dove_dt_init,
 	.restart	= dove_restart,
 	.dt_compat	= dove_dt_board_compat,
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 00247c7..c122bcf 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -27,6 +27,22 @@
 #include <plat/time.h>
 #include "common.h"
 
+/* These can go away once Dove uses the mvebu-mbus DT binding */
+#define DOVE_MBUS_PCIE0_MEM_TARGET    0x4
+#define DOVE_MBUS_PCIE0_MEM_ATTR      0xe8
+#define DOVE_MBUS_PCIE0_IO_TARGET     0x4
+#define DOVE_MBUS_PCIE0_IO_ATTR       0xe0
+#define DOVE_MBUS_PCIE1_MEM_TARGET    0x8
+#define DOVE_MBUS_PCIE1_MEM_ATTR      0xe8
+#define DOVE_MBUS_PCIE1_IO_TARGET     0x8
+#define DOVE_MBUS_PCIE1_IO_ATTR       0xe0
+#define DOVE_MBUS_CESA_TARGET         0x3
+#define DOVE_MBUS_CESA_ATTR           0x1
+#define DOVE_MBUS_BOOTROM_TARGET      0x1
+#define DOVE_MBUS_BOOTROM_ATTR        0xfd
+#define DOVE_MBUS_SCRATCHPAD_TARGET   0xd
+#define DOVE_MBUS_SCRATCHPAD_ATTR     0x0
+
 /*****************************************************************************
  * I/O Address Mapping
  ****************************************************************************/
@@ -108,8 +124,8 @@ static void __init dove_clk_init(void)
 	orion_clkdev_add(NULL, "sdhci-dove.1", sdio1);
 	orion_clkdev_add(NULL, "orion_nand", nand);
 	orion_clkdev_add(NULL, "cafe1000-ccic.0", camera);
-	orion_clkdev_add(NULL, "kirkwood-i2s.0", i2s0);
-	orion_clkdev_add(NULL, "kirkwood-i2s.1", i2s1);
+	orion_clkdev_add(NULL, "mvebu-audio.0", i2s0);
+	orion_clkdev_add(NULL, "mvebu-audio.1", i2s1);
 	orion_clkdev_add(NULL, "mv_crypto", crypto);
 	orion_clkdev_add(NULL, "dove-ac97", ac97);
 	orion_clkdev_add(NULL, "dove-pdma", pdma);
@@ -332,34 +348,40 @@ void __init dove_setup_cpu_wins(void)
 {
 	/*
 	 * The PCIe windows will no longer be statically allocated
-	 * here once Dove is migrated to the pci-mvebu driver.
+	 * here once Dove is migrated to the pci-mvebu driver. The
+	 * non-PCIe windows will no longer be created here once Dove
+	 * fully moves to DT.
 	 */
-	mvebu_mbus_add_window_remap_flags("pcie0.0",
+	mvebu_mbus_add_window_remap_by_id(DOVE_MBUS_PCIE0_IO_TARGET,
+					  DOVE_MBUS_PCIE0_IO_ATTR,
 					  DOVE_PCIE0_IO_PHYS_BASE,
 					  DOVE_PCIE0_IO_SIZE,
-					  DOVE_PCIE0_IO_BUS_BASE,
-					  MVEBU_MBUS_PCI_IO);
-	mvebu_mbus_add_window_remap_flags("pcie1.0",
+					  DOVE_PCIE0_IO_BUS_BASE);
+	mvebu_mbus_add_window_remap_by_id(DOVE_MBUS_PCIE1_IO_TARGET,
+					  DOVE_MBUS_PCIE1_IO_ATTR,
 					  DOVE_PCIE1_IO_PHYS_BASE,
 					  DOVE_PCIE1_IO_SIZE,
-					  DOVE_PCIE1_IO_BUS_BASE,
-					  MVEBU_MBUS_PCI_IO);
-	mvebu_mbus_add_window_remap_flags("pcie0.0",
-					  DOVE_PCIE0_MEM_PHYS_BASE,
-					  DOVE_PCIE0_MEM_SIZE,
-					  MVEBU_MBUS_NO_REMAP,
-					  MVEBU_MBUS_PCI_MEM);
-	mvebu_mbus_add_window_remap_flags("pcie1.0",
-					  DOVE_PCIE1_MEM_PHYS_BASE,
-					  DOVE_PCIE1_MEM_SIZE,
-					  MVEBU_MBUS_NO_REMAP,
-					  MVEBU_MBUS_PCI_MEM);
-	mvebu_mbus_add_window("cesa", DOVE_CESA_PHYS_BASE,
-			      DOVE_CESA_SIZE);
-	mvebu_mbus_add_window("bootrom", DOVE_BOOTROM_PHYS_BASE,
-			      DOVE_BOOTROM_SIZE);
-	mvebu_mbus_add_window("scratchpad", DOVE_SCRATCHPAD_PHYS_BASE,
-			      DOVE_SCRATCHPAD_SIZE);
+					  DOVE_PCIE1_IO_BUS_BASE);
+	mvebu_mbus_add_window_by_id(DOVE_MBUS_PCIE0_MEM_TARGET,
+				    DOVE_MBUS_PCIE0_MEM_ATTR,
+				    DOVE_PCIE0_MEM_PHYS_BASE,
+				    DOVE_PCIE0_MEM_SIZE);
+	mvebu_mbus_add_window_by_id(DOVE_MBUS_PCIE1_MEM_TARGET,
+				    DOVE_MBUS_PCIE1_MEM_ATTR,
+				    DOVE_PCIE1_MEM_PHYS_BASE,
+				    DOVE_PCIE1_MEM_SIZE);
+	mvebu_mbus_add_window_by_id(DOVE_MBUS_CESA_TARGET,
+				    DOVE_MBUS_CESA_ATTR,
+				    DOVE_CESA_PHYS_BASE,
+				    DOVE_CESA_SIZE);
+	mvebu_mbus_add_window_by_id(DOVE_MBUS_BOOTROM_TARGET,
+				    DOVE_MBUS_BOOTROM_ATTR,
+				    DOVE_BOOTROM_PHYS_BASE,
+				    DOVE_BOOTROM_SIZE);
+	mvebu_mbus_add_window_by_id(DOVE_MBUS_SCRATCHPAD_TARGET,
+				    DOVE_MBUS_SCRATCHPAD_ATTR,
+				    DOVE_SCRATCHPAD_PHYS_BASE,
+				    DOVE_SCRATCHPAD_SIZE);
 }
 
 void __init dove_init(void)
diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S
deleted file mode 100644
index 5929cbc..0000000
--- a/arch/arm/mach-dove/include/mach/debug-macro.S
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <mach/bridge-regs.h>
-
-	.macro	addruart, rp, rv, tmp
-	ldr	\rp, =DOVE_SB_REGS_PHYS_BASE
-	ldr	\rv, =DOVE_SB_REGS_VIRT_BASE
-	orr	\rp, \rp, #0x00012000
-	orr	\rv, \rv, #0x00012000
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-dove/mpp.c b/arch/arm/mach-dove/mpp.c
index 60bd729..8a433a5 100644
--- a/arch/arm/mach-dove/mpp.c
+++ b/arch/arm/mach-dove/mpp.c
@@ -47,7 +47,7 @@ static const struct dove_mpp_grp dove_mpp_grp[] = {
 
 /* Enable gpio for a range of pins. mode should be a combination of
    GPIO_OUTPUT_OK | GPIO_INPUT_OK */
-static void dove_mpp_gpio_mode(int start, int end, int gpio_mode)
+static void __init dove_mpp_gpio_mode(int start, int end, int gpio_mode)
 {
 	int i;
 
diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
deleted file mode 100644
index bb02c05..0000000
--- a/arch/arm/mach-ebsa110/include/mach/debug-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/* arch/arm/mach-ebsa110/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-**/
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0xf0000000
-		orr	\rp, \rp, #0x00000be0
-		mov	\rp, \rv
-		.endm
-
-#define UART_SHIFT	2
-#define FLOW_CONTROL
-#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index fe3c1fa..93e54fd 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -194,20 +194,6 @@ config MACH_VISION_EP9307
 	  Say 'Y' here if you want your kernel to support the
 	  Vision Engraving Systems EP9307 SoM.
 
-choice
-	prompt "Select a UART for early kernel messages"
-
-config EP93XX_EARLY_UART1
-	bool "UART1"
-
-config EP93XX_EARLY_UART2
-	bool "UART2"
-
-config EP93XX_EARLY_UART3
-	bool "UART3"
-
-endchoice
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index c95dbce..39ef3b6 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -212,7 +212,7 @@ static struct clk_lookup clocks[] = {
 	INIT_CK(NULL,			"hclk",		&clk_h),
 	INIT_CK(NULL,			"apb_pclk",	&clk_p),
 	INIT_CK(NULL,			"pll2",		&clk_pll2),
-	INIT_CK("ep93xx-ohci",		NULL,		&clk_usb_host),
+	INIT_CK("ohci-platform",	NULL,		&clk_usb_host),
 	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),
 	INIT_CK("ep93xx-fb",		NULL,		&clk_video),
 	INIT_CK("ep93xx-spi.0",		NULL,		&clk_spi),
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index df8612f..d95ee28a 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -36,6 +36,7 @@
 #include <linux/export.h>
 #include <linux/irqchip/arm-vic.h>
 #include <linux/reboot.h>
+#include <linux/usb/ohci_pdriver.h>
 
 #include <mach/hardware.h>
 #include <linux/platform_data/video-ep93xx.h>
@@ -281,7 +282,7 @@ static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE,
 	{ IRQ_EP93XX_UART1 }, &ep93xx_uart_data);
 
 static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE,
-	{ IRQ_EP93XX_UART2 }, &ep93xx_uart_data);
+	{ IRQ_EP93XX_UART2 }, NULL);
 
 static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE,
 	{ IRQ_EP93XX_UART3 }, &ep93xx_uart_data);
@@ -297,25 +298,53 @@ static struct platform_device ep93xx_rtc_device = {
 	.resource	= ep93xx_rtc_resource,
 };
 
+/*************************************************************************
+ * EP93xx OHCI USB Host
+ *************************************************************************/
+
+static struct clk *ep93xx_ohci_host_clock;
+
+static int ep93xx_ohci_power_on(struct platform_device *pdev)
+{
+	if (!ep93xx_ohci_host_clock) {
+		ep93xx_ohci_host_clock = devm_clk_get(&pdev->dev, NULL);
+		if (IS_ERR(ep93xx_ohci_host_clock))
+			return PTR_ERR(ep93xx_ohci_host_clock);
+	}
+
+	return clk_enable(ep93xx_ohci_host_clock);
+}
+
+static void ep93xx_ohci_power_off(struct platform_device *pdev)
+{
+	clk_disable(ep93xx_ohci_host_clock);
+}
+
+static struct usb_ohci_pdata ep93xx_ohci_pdata = {
+	.power_on	= ep93xx_ohci_power_on,
+	.power_off	= ep93xx_ohci_power_off,
+	.power_suspend	= ep93xx_ohci_power_off,
+};
 
 static struct resource ep93xx_ohci_resources[] = {
 	DEFINE_RES_MEM(EP93XX_USB_PHYS_BASE, 0x1000),
 	DEFINE_RES_IRQ(IRQ_EP93XX_USB),
 };
 
+static u64 ep93xx_ohci_dma_mask = DMA_BIT_MASK(32);
 
 static struct platform_device ep93xx_ohci_device = {
-	.name		= "ep93xx-ohci",
+	.name		= "ohci-platform",
 	.id		= -1,
+	.num_resources	= ARRAY_SIZE(ep93xx_ohci_resources),
+	.resource	= ep93xx_ohci_resources,
 	.dev		= {
-		.dma_mask		= &ep93xx_ohci_device.dev.coherent_dma_mask,
+		.dma_mask		= &ep93xx_ohci_dma_mask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &ep93xx_ohci_pdata,
 	},
-	.num_resources	= ARRAY_SIZE(ep93xx_ohci_resources),
-	.resource	= ep93xx_ohci_resources,
 };
 
-
 /*************************************************************************
  * EP93xx physmap'ed flash
  *************************************************************************/
diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
deleted file mode 100644
index af54e43..0000000
--- a/arch/arm/mach-ep93xx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/debug-macro.S
- * Debugging macro include header
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-#include <mach/ep93xx-regs.h>
-
-		.macro	addruart, rp, rv, tmp
-		ldr	\rp, =EP93XX_APB_PHYS_BASE	@ Physical base
-		ldr	\rv, =EP93XX_APB_VIRT_BASE	@ virtual base
-		orr	\rp, \rp, #0x000c0000
-		orr	\rv, \rv, #0x000c0000
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h
index b5cc77d..03c42e5 100644
--- a/arch/arm/mach-ep93xx/include/mach/uncompress.h
+++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h
@@ -31,18 +31,8 @@ static void __raw_writel(unsigned int value, unsigned int ptr)
 	*((volatile unsigned int *)ptr) = value;
 }
 
-#if defined(CONFIG_EP93XX_EARLY_UART1)
-#define UART_BASE		EP93XX_UART1_PHYS_BASE
-#elif defined(CONFIG_EP93XX_EARLY_UART2)
-#define UART_BASE		EP93XX_UART2_PHYS_BASE
-#elif defined(CONFIG_EP93XX_EARLY_UART3)
-#define UART_BASE		EP93XX_UART3_PHYS_BASE
-#else
-#define UART_BASE		EP93XX_UART1_PHYS_BASE
-#endif
-
-#define PHYS_UART_DATA		(UART_BASE + 0x00)
-#define PHYS_UART_FLAG		(UART_BASE + 0x18)
+#define PHYS_UART_DATA		(CONFIG_DEBUG_UART_PHYS + 0x00)
+#define PHYS_UART_FLAG		(CONFIG_DEBUG_UART_PHYS + 0x18)
 #define UART_FLAG_TXFF		0x20
 
 static inline void putc(int c)
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index 605956f..6bc1c18 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -23,7 +23,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/mmc_spi.h>
@@ -224,62 +224,15 @@ static struct ep93xx_spi_chip_ops vision_spi_flash_hw = {
 #define VISION_SPI_MMC_WP	EP93XX_GPIO_LINE_F(0)
 #define VISION_SPI_MMC_CD	EP93XX_GPIO_LINE_EGPIO15
 
-static struct gpio vision_spi_mmc_gpios[] = {
-	{ VISION_SPI_MMC_WP, GPIOF_DIR_IN, "mmc_spi:wp" },
-	{ VISION_SPI_MMC_CD, GPIOF_DIR_IN, "mmc_spi:cd" },
-};
-
-static int vision_spi_mmc_init(struct device *pdev,
-			irqreturn_t (*func)(int, void *), void *pdata)
-{
-	int err;
-
-	err = gpio_request_array(vision_spi_mmc_gpios,
-				 ARRAY_SIZE(vision_spi_mmc_gpios));
-	if (err)
-		return err;
-
-	err = gpio_set_debounce(VISION_SPI_MMC_CD, 1);
-	if (err)
-		goto exit_err;
-
-	err = request_irq(gpio_to_irq(VISION_SPI_MMC_CD), func,
-			IRQ_TYPE_EDGE_BOTH, "mmc_spi:cd", pdata);
-	if (err)
-		goto exit_err;
-
-	return 0;
-
-exit_err:
-	gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios));
-	return err;
-
-}
-
-static void vision_spi_mmc_exit(struct device *pdev, void *pdata)
-{
-	free_irq(gpio_to_irq(VISION_SPI_MMC_CD), pdata);
-	gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios));
-}
-
-static int vision_spi_mmc_get_ro(struct device *pdev)
-{
-	return !!gpio_get_value(VISION_SPI_MMC_WP);
-}
-
-static int vision_spi_mmc_get_cd(struct device *pdev)
-{
-	return !gpio_get_value(VISION_SPI_MMC_CD);
-}
-
 static struct mmc_spi_platform_data vision_spi_mmc_data = {
-	.init		= vision_spi_mmc_init,
-	.exit		= vision_spi_mmc_exit,
-	.get_ro		= vision_spi_mmc_get_ro,
-	.get_cd		= vision_spi_mmc_get_cd,
 	.detect_delay	= 100,
 	.powerup_msecs	= 100,
 	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.flags		= MMC_SPI_USE_CD_GPIO | MMC_SPI_USE_RO_GPIO,
+	.cd_gpio	= VISION_SPI_MMC_CD,
+	.cd_debounce	= 1,
+	.ro_gpio	= VISION_SPI_MMC_WP,
+	.caps2		= MMC_CAP2_RO_ACTIVE_HIGH,
 };
 
 static int vision_spi_mmc_hw_setup(struct spi_device *spi)
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 5952e68..f9d67a0 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -14,19 +14,28 @@ menu "SAMSUNG EXYNOS SoCs Support"
 config ARCH_EXYNOS4
 	bool "SAMSUNG EXYNOS4"
 	default y
+	select ARM_AMBA
+	select CLKSRC_OF
+	select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210
+	select CPU_EXYNOS4210
 	select GIC_NON_BANKED
+	select KEYBOARD_SAMSUNG if INPUT_KEYBOARD
 	select HAVE_ARM_SCU if SMP
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
+	select S5P_DEV_MFC
 	help
 	  Samsung EXYNOS4 SoCs based systems
 
 config ARCH_EXYNOS5
 	bool "SAMSUNG EXYNOS5"
+	select ARM_AMBA
+	select CLKSRC_OF
 	select HAVE_ARM_SCU if SMP
 	select HAVE_SMP
 	select PINCTRL
+	select USB_ARCH_HAS_XHCI
 	help
 	  Samsung EXYNOS5 (Cortex-A15) SoC based systems
 
@@ -36,6 +45,7 @@ config CPU_EXYNOS4210
 	bool "SAMSUNG EXYNOS4210"
 	default y
 	depends on ARCH_EXYNOS4
+	select ARCH_HAS_BANDGAP
 	select ARM_CPU_SUSPEND if PM
 	select PINCTRL_EXYNOS
 	select PM_GENERIC_DOMAINS if PM
@@ -49,7 +59,9 @@ config SOC_EXYNOS4212
 	bool "SAMSUNG EXYNOS4212"
 	default y
 	depends on ARCH_EXYNOS4
+	select ARCH_HAS_BANDGAP
 	select PINCTRL_EXYNOS
+	select PM_GENERIC_DOMAINS if PM
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
 	select SAMSUNG_DMADEV
@@ -60,7 +72,9 @@ config SOC_EXYNOS4412
 	bool "SAMSUNG EXYNOS4412"
 	default y
 	depends on ARCH_EXYNOS4
+	select ARCH_HAS_BANDGAP
 	select PINCTRL_EXYNOS
+	select PM_GENERIC_DOMAINS if PM
 	select SAMSUNG_DMADEV
 	help
 	  Enable EXYNOS4412 SoC support
@@ -69,6 +83,7 @@ config SOC_EXYNOS5250
 	bool "SAMSUNG EXYNOS5250"
 	default y
 	depends on ARCH_EXYNOS5
+	select ARCH_HAS_BANDGAP
 	select PINCTRL_EXYNOS
 	select PM_GENERIC_DOMAINS if PM
 	select S5P_PM if PM
@@ -93,6 +108,7 @@ config SOC_EXYNOS5440
 	default y
 	depends on ARCH_EXYNOS5
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
+	select ARCH_HAS_BANDGAP
 	select ARCH_HAS_OPP
 	select HAVE_ARM_ARCH_TIMER
 	select AUTO_ZRELADDR
@@ -103,35 +119,6 @@ config SOC_EXYNOS5440
 	help
 	  Enable EXYNOS5440 SoC support
 
-comment "Flattened Device Tree based board for EXYNOS SoCs"
-
-config MACH_EXYNOS4_DT
-	bool "Samsung Exynos4 Machine using device tree"
-	default y
-	depends on ARCH_EXYNOS4
-	select ARM_AMBA
-	select CLKSRC_OF
-	select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210
-	select CPU_EXYNOS4210
-	select KEYBOARD_SAMSUNG if INPUT_KEYBOARD
-	select S5P_DEV_MFC
-	help
-	  Machine support for Samsung Exynos4 machine with device tree enabled.
-	  Select this if a fdt blob is available for the Exynos4 SoC based board.
-	  Note: This is under development and not all peripherals can be supported
-	  with this machine file.
-
-config MACH_EXYNOS5_DT
-	bool "SAMSUNG EXYNOS5 Machine using device tree"
-	default y
-	depends on ARCH_EXYNOS5
-	select ARM_AMBA
-	select CLKSRC_OF
-	select USB_ARCH_HAS_XHCI
-	help
-	  Machine support for Samsung EXYNOS5 machine with device tree enabled.
-	  Select this if a fdt blob is available for the EXYNOS5 SoC based board.
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 5369615..8930b66 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -32,5 +32,5 @@ AFLAGS_exynos-smc.o		:=-Wa,-march=armv7-a$(plus_sec)
 
 # machine support
 
-obj-$(CONFIG_MACH_EXYNOS4_DT)		+= mach-exynos4-dt.o
-obj-$(CONFIG_MACH_EXYNOS5_DT)		+= mach-exynos5-dt.o
+obj-$(CONFIG_ARCH_EXYNOS4)	+= mach-exynos4-dt.o
+obj-$(CONFIG_ARCH_EXYNOS5)	+= mach-exynos5-dt.o
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index ba95e5d..a4e7ba8 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -26,8 +26,6 @@
 #include <linux/export.h>
 #include <linux/irqdomain.h>
 #include <linux/of_address.h>
-#include <linux/clocksource.h>
-#include <linux/clk-provider.h>
 #include <linux/irqchip/arm-gic.h>
 #include <linux/irqchip/chained_irq.h>
 
@@ -367,12 +365,6 @@ static void __init exynos5_map_io(void)
 		iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc));
 }
 
-void __init exynos_init_time(void)
-{
-	of_clk_init(NULL);
-	clocksource_of_init();
-}
-
 struct bus_type exynos_subsys = {
 	.name		= "exynos-core",
 	.dev_name	= "exynos-core",
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 972490f..f0fa205 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -16,8 +16,6 @@
 #include <linux/of.h>
 
 void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1);
-void exynos_init_time(void);
-extern unsigned long xxti_f, xusbxti_f;
 
 struct map_desc;
 void exynos_init_io(void);
@@ -25,56 +23,14 @@ void exynos4_restart(enum reboot_mode mode, const char *cmd);
 void exynos5_restart(enum reboot_mode mode, const char *cmd);
 void exynos_init_late(void);
 
-/* ToDo: remove these after migrating legacy exynos4 platforms to dt */
-void exynos4_clk_init(struct device_node *np, int is_exynos4210, void __iomem *reg_base, unsigned long xom);
-void exynos4_clk_register_fixed_ext(unsigned long, unsigned long);
-
 void exynos_firmware_init(void);
 
-void exynos_set_timer_source(u8 channels);
-
 #ifdef CONFIG_PM_GENERIC_DOMAINS
 int exynos_pm_late_initcall(void);
 #else
 static inline int exynos_pm_late_initcall(void) { return 0; }
 #endif
 
-#ifdef CONFIG_ARCH_EXYNOS4
-void exynos4_register_clocks(void);
-void exynos4_setup_clocks(void);
-
-#else
-#define exynos4_register_clocks()
-#define exynos4_setup_clocks()
-#endif
-
-#ifdef CONFIG_ARCH_EXYNOS5
-void exynos5_register_clocks(void);
-void exynos5_setup_clocks(void);
-
-#else
-#define exynos5_register_clocks()
-#define exynos5_setup_clocks()
-#endif
-
-#ifdef CONFIG_CPU_EXYNOS4210
-void exynos4210_register_clocks(void);
-
-#else
-#define exynos4210_register_clocks()
-#endif
-
-#ifdef CONFIG_SOC_EXYNOS4212
-void exynos4212_register_clocks(void);
-
-#else
-#define exynos4212_register_clocks()
-#endif
-
-struct device_node;
-void combiner_init(void __iomem *combiner_base, struct device_node *np,
-			unsigned int max_nr, int irq_base);
-
 extern struct smp_operations exynos_smp_ops;
 
 extern void exynos_cpu_die(unsigned int cpu);
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
index 225ee84..ac139226 100644
--- a/arch/arm/mach-exynos/cpuidle.c
+++ b/arch/arm/mach-exynos/cpuidle.c
@@ -200,6 +200,9 @@ static int __init exynos4_init_cpuidle(void)
 	if (soc_is_exynos5250())
 		exynos5_core_down_clk();
 
+	if (soc_is_exynos5440())
+		exynos4_idle_driver.state_count = 1;
+
 	ret = cpuidle_register_driver(&exynos4_idle_driver);
 	if (ret) {
 		printk(KERN_ERR "CPUidle failed to register driver\n");
diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h
index 57344b7..2cdb63e 100644
--- a/arch/arm/mach-exynos/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h
@@ -44,11 +44,6 @@
 #define S5P_DAC_PHY_CONTROL			S5P_PMUREG(0x070C)
 #define S5P_DAC_PHY_ENABLE			(1 << 0)
 
-#define S5P_MIPI_DPHY_CONTROL(n)		S5P_PMUREG(0x0710 + (n) * 4)
-#define S5P_MIPI_DPHY_ENABLE			(1 << 0)
-#define S5P_MIPI_DPHY_SRESETN			(1 << 1)
-#define S5P_MIPI_DPHY_MRESETN			(1 << 2)
-
 #define S5P_INFORM0				S5P_PMUREG(0x0800)
 #define S5P_INFORM1				S5P_PMUREG(0x0804)
 #define S5P_INFORM2				S5P_PMUREG(0x0808)
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index 0099c6c..4b8f6e2 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -11,12 +11,8 @@
  * published by the Free Software Foundation.
 */
 
-#include <linux/kernel.h>
 #include <linux/of_platform.h>
 #include <linux/of_fdt.h>
-#include <linux/serial_core.h>
-#include <linux/memblock.h>
-#include <linux/clocksource.h>
 
 #include <asm/mach/arch.h>
 #include <plat/mfc.h>
@@ -54,7 +50,6 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
 	.init_early	= exynos_firmware_init,
 	.init_machine	= exynos4_dt_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos_init_time,
 	.dt_compat	= exynos4_dt_compat,
 	.restart        = exynos4_restart,
 	.reserve	= exynos4_reserve,
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index f874b77..7976ab3 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -11,14 +11,10 @@
 
 #include <linux/of_platform.h>
 #include <linux/of_fdt.h>
-#include <linux/memblock.h>
 #include <linux/io.h>
-#include <linux/clocksource.h>
 
 #include <asm/mach/arch.h>
 #include <mach/regs-pmu.h>
-
-#include <plat/cpu.h>
 #include <plat/mfc.h>
 
 #include "common.h"
@@ -76,7 +72,6 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
 	.map_io		= exynos_init_io,
 	.init_machine	= exynos5_dt_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos_init_time,
 	.dt_compat	= exynos5_dt_compat,
 	.restart        = exynos5_restart,
 	.reserve	= exynos5_reserve,
diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S
index c169f0c..02247f3 100644
--- a/arch/arm/mach-footbridge/include/mach/debug-macro.S
+++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S
@@ -13,20 +13,6 @@
 
 #include <asm/hardware/dec21285.h>
 
-#ifndef CONFIG_DEBUG_DC21285_PORT
-	/* For NetWinder debugging */
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0x000003f8
-		orr	\rv, \rp, #0xfe000000	@ virtual
-		orr	\rv, \rv, #0x00e00000	@ virtual
-		orr	\rp, \rp, #0x7c000000	@ physical
-		.endm
-
-#define UART_SHIFT	0
-#define FLOW_CONTROL
-#include <asm/hardware/debug-8250.S>
-
-#else
 #include <mach/hardware.h>
 	/* For EBSA285 debugging */
 		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
@@ -54,4 +40,3 @@
 
 		.macro	waituart,rd,rx
 		.endm
-#endif
diff --git a/arch/arm/mach-gemini/include/mach/debug-macro.S b/arch/arm/mach-gemini/include/mach/debug-macro.S
deleted file mode 100644
index 8376707..0000000
--- a/arch/arm/mach-gemini/include/mach/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Copyright (C) 2001-2006 Storlink, Corp.
- *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <mach/hardware.h>
-
-	.macro	addruart, rp, rv, tmp
-	ldr	\rp, =GEMINI_UART_BASE			@ physical
-	ldr	\rv, =IO_ADDRESS(GEMINI_UART_BASE)	@ virtual
-	.endm
-
-#define UART_SHIFT	2
-#define FLOW_CONTROL
-#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-gemini/time.c b/arch/arm/mach-gemini/time.c
index 21dc5a8..0a63c4d2 100644
--- a/arch/arm/mach-gemini/time.c
+++ b/arch/arm/mach-gemini/time.c
@@ -13,6 +13,8 @@
 #include <mach/hardware.h>
 #include <mach/global_reg.h>
 #include <asm/mach/time.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
 
 /*
  * Register definitions for the timers
@@ -33,19 +35,89 @@
 #define TIMER_3_CR_CLOCK		(1 << 7)
 #define TIMER_3_CR_INT			(1 << 8)
 
+static unsigned int tick_rate;
+
+static int gemini_timer_set_next_event(unsigned long cycles,
+				       struct clock_event_device *evt)
+{
+	u32 cr;
+
+	cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+
+	/* This may be overdoing it, feel free to test without this */
+	cr &= ~TIMER_2_CR_ENABLE;
+	cr &= ~TIMER_2_CR_INT;
+	writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+
+	/* Set next event */
+	writel(cycles, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE)));
+	writel(cycles, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE)));
+	cr |= TIMER_2_CR_ENABLE;
+	cr |= TIMER_2_CR_INT;
+	writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+
+	return 0;
+}
+
+static void gemini_timer_set_mode(enum clock_event_mode mode,
+				  struct clock_event_device *evt)
+{
+	u32 period = DIV_ROUND_CLOSEST(tick_rate, HZ);
+	u32 cr;
+
+	switch (mode) {
+        case CLOCK_EVT_MODE_PERIODIC:
+		/* Start the timer */
+		writel(period,
+		       TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE)));
+		writel(period,
+		       TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE)));
+		cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+		cr |= TIMER_2_CR_ENABLE;
+		cr |= TIMER_2_CR_INT;
+		writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+	case CLOCK_EVT_MODE_UNUSED:
+        case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_RESUME:
+		/*
+		 * Disable also for oneshot: the set_next() call will
+		 * arm the timer instead.
+		 */
+		cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+		cr &= ~TIMER_2_CR_ENABLE;
+		cr &= ~TIMER_2_CR_INT;
+		writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+		break;
+	default:
+                break;
+	}
+}
+
+/* Use TIMER2 as clock event */
+static struct clock_event_device gemini_clockevent = {
+	.name		= "TIMER2",
+	.rating		= 300, /* Reasonably fast and accurate clock event */
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event	= gemini_timer_set_next_event,
+	.set_mode	= gemini_timer_set_mode,
+};
+
 /*
  * IRQ handler for the timer
  */
 static irqreturn_t gemini_timer_interrupt(int irq, void *dev_id)
 {
-	timer_tick();
+	struct clock_event_device *evt = &gemini_clockevent;
 
+	evt->event_handler(evt);
 	return IRQ_HANDLED;
 }
 
 static struct irqaction gemini_timer_irq = {
 	.name		= "Gemini Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.flags		= IRQF_TIMER,
 	.handler	= gemini_timer_interrupt,
 };
 
@@ -54,9 +126,9 @@ static struct irqaction gemini_timer_irq = {
  */
 void __init gemini_timer_init(void)
 {
-	unsigned int tick_rate, reg_v;
+	u32 reg_v;
 
-	reg_v = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE + GLOBAL_STATUS));
+	reg_v = readl(IO_ADDRESS(GEMINI_GLOBAL_BASE + GLOBAL_STATUS));
 	tick_rate = REG_TO_AHB_SPEED(reg_v) * 1000000;
 
 	printk(KERN_INFO "Bus: %dMHz", tick_rate / 1000000);
@@ -82,8 +154,17 @@ void __init gemini_timer_init(void)
 	 * Make irqs happen for the system timer
 	 */
 	setup_irq(IRQ_TIMER2, &gemini_timer_irq);
-	/* Start the timer */
-	__raw_writel(tick_rate / HZ, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE)));
-	__raw_writel(tick_rate / HZ, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE)));
-	__raw_writel(TIMER_2_CR_ENABLE | TIMER_2_CR_INT, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+
+	/* Enable and use TIMER1 as clock source */
+	writel(0xffffffff, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER1_BASE)));
+	writel(0xffffffff, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER1_BASE)));
+	writel(TIMER_1_CR_ENABLE, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+	if (clocksource_mmio_init(TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER1_BASE)),
+				  "TIMER1", tick_rate, 300, 32,
+				  clocksource_mmio_readl_up))
+		pr_err("timer: failed to initialize gemini clock source\n");
+
+	/* Configure and register the clockevent */
+	clockevents_config_and_register(&gemini_clockevent, tick_rate,
+					1, 0xffffffff);
 }
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index cd9fcb1..fe98df4 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -1,20 +1,26 @@
 config ARCH_HIGHBANK
 	bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7
+	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_HAS_OPP
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_AMBA
+	select ARM_ERRATA_764369
+	select ARM_ERRATA_775420
+	select ARM_ERRATA_798181
 	select ARM_GIC
+	select ARM_PSCI
 	select ARM_TIMER_SP804
 	select CACHE_L2X0
-	select CLKDEV_LOOKUP
 	select COMMON_CLK
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select MAILBOX
 	select PL320_MBOX
 	select SPARSE_IRQ
 	select USE_OF
+	select ZONE_DMA if ARM_LPAE
diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile
index 8a1ef57..55840f4 100644
--- a/arch/arm/mach-highbank/Makefile
+++ b/arch/arm/mach-highbank/Makefile
@@ -3,6 +3,4 @@ obj-y					:= highbank.o system.o smc.o
 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_smc.o				:=-Wa,-march=armv7-a$(plus_sec)
 
-obj-$(CONFIG_SMP)			+= platsmp.o
-obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
 obj-$(CONFIG_PM_SLEEP)			+= pm.o
diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h
index aea1ec5..7ec5edc 100644
--- a/arch/arm/mach-highbank/core.h
+++ b/arch/arm/mach-highbank/core.h
@@ -3,7 +3,6 @@
 
 #include <linux/reboot.h>
 
-extern void highbank_set_cpu_jump(int cpu, void *jump_addr);
 extern void highbank_restart(enum reboot_mode, const char *);
 extern void __iomem *scu_base_addr;
 
@@ -14,8 +13,5 @@ static inline void highbank_pm_init(void) {}
 #endif
 
 extern void highbank_smc1(int fn, int arg);
-extern void highbank_cpu_die(unsigned int cpu);
-
-extern struct smp_operations highbank_smp_ops;
 
 #endif
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 8881579..b3d7e56 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -18,24 +18,18 @@
 #include <linux/clocksource.h>
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
-#include <linux/irq.h>
 #include <linux/irqchip.h>
-#include <linux/irqdomain.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
-#include <linux/smp.h>
 #include <linux/amba/bus.h>
-#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
 
-#include <asm/cacheflush.h>
-#include <asm/cputype.h>
-#include <asm/smp_plat.h>
+#include <asm/psci.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/time.h>
 
 #include "core.h"
 #include "sysregs.h"
@@ -53,25 +47,12 @@ static void __init highbank_scu_map_io(void)
 	scu_base_addr = ioremap(base, SZ_4K);
 }
 
-#define HB_JUMP_TABLE_PHYS(cpu)		(0x40 + (0x10 * (cpu)))
-#define HB_JUMP_TABLE_VIRT(cpu)		phys_to_virt(HB_JUMP_TABLE_PHYS(cpu))
 
-void highbank_set_cpu_jump(int cpu, void *jump_addr)
-{
-	cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 0);
-	writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu));
-	__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
-	outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
-			  HB_JUMP_TABLE_PHYS(cpu) + 15);
-}
-
-#ifdef CONFIG_CACHE_L2X0
 static void highbank_l2x0_disable(void)
 {
 	/* Disable PL310 L2 Cache controller */
 	highbank_smc1(0x102, 0x0);
 }
-#endif
 
 static void __init highbank_init_irq(void)
 {
@@ -80,26 +61,13 @@ static void __init highbank_init_irq(void)
 	if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9"))
 		highbank_scu_map_io();
 
-#ifdef CONFIG_CACHE_L2X0
 	/* Enable PL310 L2 Cache controller */
-	highbank_smc1(0x102, 0x1);
-	l2x0_of_init(0, ~0UL);
-	outer_cache.disable = highbank_l2x0_disable;
-#endif
-}
-
-static void __init highbank_timer_init(void)
-{
-	struct device_node *np;
-
-	/* Map system registers */
-	np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
-	sregs_base = of_iomap(np, 0);
-	WARN_ON(!sregs_base);
-
-	of_clk_init(NULL);
-
-	clocksource_of_init();
+	if (IS_ENABLED(CONFIG_CACHE_L2X0) &&
+	    of_find_compatible_node(NULL, NULL, "arm,pl310-cache")) {
+		highbank_smc1(0x102, 0x1);
+		l2x0_of_init(0, ~0UL);
+		outer_cache.disable = highbank_l2x0_disable;
+	}
 }
 
 static void highbank_power_off(void)
@@ -158,8 +126,19 @@ static struct notifier_block highbank_platform_nb = {
 	.notifier_call = highbank_platform_notifier,
 };
 
+static struct platform_device highbank_cpuidle_device = {
+	.name = "cpuidle-calxeda",
+};
+
 static void __init highbank_init(void)
 {
+	struct device_node *np;
+
+	/* Map system registers */
+	np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
+	sregs_base = of_iomap(np, 0);
+	WARN_ON(!sregs_base);
+
 	pm_power_off = highbank_power_off;
 	highbank_pm_init();
 
@@ -167,6 +146,9 @@ static void __init highbank_init(void)
 	bus_register_notifier(&amba_bustype, &highbank_amba_nb);
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+	if (psci_ops.cpu_suspend)
+		platform_device_register(&highbank_cpuidle_device);
 }
 
 static const char *highbank_match[] __initconst = {
@@ -176,9 +158,10 @@ static const char *highbank_match[] __initconst = {
 };
 
 DT_MACHINE_START(HIGHBANK, "Highbank")
-	.smp		= smp_ops(highbank_smp_ops),
+#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
+	.dma_zone_size	= (4ULL * SZ_1G),
+#endif
 	.init_irq	= highbank_init_irq,
-	.init_time	= highbank_timer_init,
 	.init_machine	= highbank_init,
 	.dt_compat	= highbank_match,
 	.restart	= highbank_restart,
diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c
deleted file mode 100644
index 32d75cf5..0000000
--- a/arch/arm/mach-highbank/platsmp.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright 2010-2011 Calxeda, Inc.
- * Based on platsmp.c, Copyright (C) 2002 ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <asm/smp_scu.h>
-
-#include "core.h"
-
-extern void secondary_startup(void);
-
-static int highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
-	highbank_set_cpu_jump(cpu, secondary_startup);
-	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
-	return 0;
-}
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-static void __init highbank_smp_init_cpus(void)
-{
-	unsigned int i, ncores = 4;
-
-	/* sanity check */
-	if (ncores > NR_CPUS) {
-		printk(KERN_WARNING
-		       "highbank: no. of cores (%d) greater than configured "
-		       "maximum of %d - clipping\n",
-		       ncores, NR_CPUS);
-		ncores = NR_CPUS;
-	}
-
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-}
-
-static void __init highbank_smp_prepare_cpus(unsigned int max_cpus)
-{
-	if (scu_base_addr)
-		scu_enable(scu_base_addr);
-}
-
-struct smp_operations highbank_smp_ops __initdata = {
-	.smp_init_cpus		= highbank_smp_init_cpus,
-	.smp_prepare_cpus	= highbank_smp_prepare_cpus,
-	.smp_boot_secondary	= highbank_boot_secondary,
-#ifdef CONFIG_HOTPLUG_CPU
-	.cpu_die		= highbank_cpu_die,
-#endif
-};
diff --git a/arch/arm/mach-highbank/pm.c b/arch/arm/mach-highbank/pm.c
index 04eddb4..7f2bd85 100644
--- a/arch/arm/mach-highbank/pm.c
+++ b/arch/arm/mach-highbank/pm.c
@@ -16,27 +16,19 @@
 
 #include <linux/cpu_pm.h>
 #include <linux/init.h>
-#include <linux/io.h>
 #include <linux/suspend.h>
 
-#include <asm/cacheflush.h>
-#include <asm/proc-fns.h>
 #include <asm/suspend.h>
-
-#include "core.h"
-#include "sysregs.h"
+#include <asm/psci.h>
 
 static int highbank_suspend_finish(unsigned long val)
 {
-	outer_flush_all();
-	outer_disable();
-
-	highbank_set_pwr_suspend();
-
-	cpu_do_idle();
+	const struct psci_power_state ps = {
+		.type = PSCI_POWER_STATE_TYPE_POWER_DOWN,
+		.affinity_level = 1,
+	};
 
-	highbank_clear_pwr_request();
-	return 0;
+	return psci_ops.cpu_suspend(ps, __pa(cpu_resume));
 }
 
 static int highbank_pm_enter(suspend_state_t state)
@@ -44,15 +36,11 @@ static int highbank_pm_enter(suspend_state_t state)
 	cpu_pm_enter();
 	cpu_cluster_pm_enter();
 
-	highbank_set_cpu_jump(0, cpu_resume);
 	cpu_suspend(0, highbank_suspend_finish);
 
 	cpu_cluster_pm_exit();
 	cpu_pm_exit();
 
-	highbank_smc1(0x102, 0x1);
-	if (scu_base_addr)
-		scu_enable(scu_base_addr);
 	return 0;
 }
 
@@ -63,5 +51,8 @@ static const struct platform_suspend_ops highbank_pm_ops = {
 
 void __init highbank_pm_init(void)
 {
+	if (!psci_ops.cpu_suspend)
+		return;
+
 	suspend_set_ops(&highbank_pm_ops);
 }
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index f546560..7a6e6f7 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,14 +1,17 @@
 config ARCH_MXC
 	bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
 	select ARCH_REQUIRE_GPIOLIB
+	select ARM_CPU_SUSPEND if PM
 	select ARM_PATCH_PHYS_VIRT
 	select AUTO_ZRELADDR if !ZBOOT_ROM
-	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select COMMON_CLK
 	select GENERIC_ALLOCATOR
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
+	select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
 	select MULTI_IRQ_HANDLER
+	select SOC_BUS
 	select SPARSE_IRQ
 	select USE_OF
 	help
@@ -22,7 +25,7 @@ config MXC_IRQ_PRIOR
 	help
 	  Select this if you want to use prioritized IRQ handling.
 	  This feature prevents higher priority ISR to be interrupted
-	  by lower priority IRQ even IRQF_DISABLED flag is not set.
+	  by lower priority IRQ.
 	  This may be useful in embedded applications, where are strong
 	  requirements for timing.
 	  Say N here, unless you have a specialized requirement.
@@ -90,14 +93,12 @@ config MACH_MX27
 config SOC_IMX1
 	bool
 	select ARCH_MX1
-	select COMMON_CLK
 	select CPU_ARM920T
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
 
 config SOC_IMX21
 	bool
-	select COMMON_CLK
 	select CPU_ARM926T
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
@@ -106,7 +107,6 @@ config SOC_IMX25
 	bool
 	select ARCH_MX25
 	select ARCH_MXC_IOMUX_V3
-	select COMMON_CLK
 	select CPU_ARM926T
 	select MXC_AVIC
 
@@ -114,7 +114,6 @@ config SOC_IMX27
 	bool
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
-	select COMMON_CLK
 	select CPU_ARM926T
 	select IMX_HAVE_IOMUX_V1
 	select MACH_MX27
@@ -122,7 +121,6 @@ config SOC_IMX27
 
 config SOC_IMX31
 	bool
-	select COMMON_CLK
 	select CPU_V6
 	select IMX_HAVE_PLATFORM_MXC_RNGA
 	select MXC_AVIC
@@ -131,7 +129,6 @@ config SOC_IMX31
 config SOC_IMX35
 	bool
 	select ARCH_MXC_IOMUX_V3
-	select COMMON_CLK
 	select CPU_V6K
 	select HAVE_EPIT
 	select MXC_AVIC
@@ -142,7 +139,6 @@ config SOC_IMX5
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
 	select ARCH_MXC_IOMUX_V3
-	select COMMON_CLK
 	select CPU_V7
 	select MXC_TZIC
 
@@ -785,21 +781,21 @@ config SOC_IMX6Q
 	bool "i.MX6 Quad/DualLite support"
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
-	select ARM_CPU_SUSPEND if PM
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
 	select ARM_ERRATA_775420
 	select ARM_GIC
-	select COMMON_CLK
 	select CPU_V7
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select HAVE_IMX_ANATOP
 	select HAVE_IMX_GPC
 	select HAVE_IMX_MMDC
 	select HAVE_IMX_SRC
 	select HAVE_SMP
 	select MFD_SYSCON
+	select MIGHT_HAVE_PCI
+	select PCI_DOMAINS if PCI
 	select PINCTRL
 	select PINCTRL_IMX6Q
 	select PL310_ERRATA_588369 if CACHE_PL310
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index e20f22d..bbe1f5b 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -15,7 +15,8 @@ imx5-pm-$(CONFIG_PM) += pm-imx5.o
 obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y)
 
 obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
-			    clk-pfd.o clk-busy.o clk.o
+			    clk-pfd.o clk-busy.o clk.o \
+			    clk-fixup-div.o clk-fixup-mux.o
 
 obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
@@ -101,6 +102,8 @@ obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
 
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
+# i.MX6SL reuses pm-imx6q.c
+obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o
 endif
 
 # i.MX5 based machines
diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c
index 0cfa07d..4a40bbb4 100644
--- a/arch/arm/mach-imx/anatop.c
+++ b/arch/arm/mach-imx/anatop.c
@@ -16,6 +16,7 @@
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
 #include "common.h"
+#include "hardware.h"
 
 #define REG_SET		0x4
 #define REG_CLR		0x8
@@ -26,6 +27,7 @@
 #define ANADIG_USB1_CHRG_DETECT	0x1b0
 #define ANADIG_USB2_CHRG_DETECT	0x210
 #define ANADIG_DIGPROG		0x260
+#define ANADIG_DIGPROG_IMX6SL	0x280
 
 #define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG	0x40000
 #define BM_ANADIG_REG_CORE_FET_ODRIVE		0x20000000
@@ -66,7 +68,7 @@ void imx_anatop_post_resume(void)
 	imx_anatop_enable_weak2p5(false);
 }
 
-void imx_anatop_usb_chrg_detect_disable(void)
+static void imx_anatop_usb_chrg_detect_disable(void)
 {
 	regmap_write(anatop, ANADIG_USB1_CHRG_DETECT,
 		BM_ANADIG_USB_CHRG_DETECT_EN_B
@@ -76,21 +78,38 @@ void imx_anatop_usb_chrg_detect_disable(void)
 		BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
 }
 
-u32 imx_anatop_get_digprog(void)
+void __init imx_init_revision_from_anatop(void)
 {
 	struct device_node *np;
 	void __iomem *anatop_base;
-	static u32 digprog;
-
-	if (digprog)
-		return digprog;
+	unsigned int revision;
+	u32 digprog;
+	u16 offset = ANADIG_DIGPROG;
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
 	anatop_base = of_iomap(np, 0);
 	WARN_ON(!anatop_base);
-	digprog = readl_relaxed(anatop_base + ANADIG_DIGPROG);
+	if (of_device_is_compatible(np, "fsl,imx6sl-anatop"))
+		offset = ANADIG_DIGPROG_IMX6SL;
+	digprog = readl_relaxed(anatop_base + offset);
+	iounmap(anatop_base);
+
+	switch (digprog & 0xff) {
+	case 0:
+		revision = IMX_CHIP_REVISION_1_0;
+		break;
+	case 1:
+		revision = IMX_CHIP_REVISION_1_1;
+		break;
+	case 2:
+		revision = IMX_CHIP_REVISION_1_2;
+		break;
+	default:
+		revision = IMX_CHIP_REVISION_UNKNOWN;
+	}
 
-	return digprog;
+	mxc_set_cpu_type(digprog >> 16 & 0xff);
+	imx_set_soc_revision(revision);
 }
 
 void __init imx_anatop_init(void)
@@ -100,4 +119,6 @@ void __init imx_anatop_init(void)
 		pr_err("%s: failed to find imx6q-anatop regmap!\n", __func__);
 		return;
 	}
+
+	imx_anatop_usb_chrg_detect_disable();
 }
diff --git a/arch/arm/mach-imx/clk-fixup-div.c b/arch/arm/mach-imx/clk-fixup-div.c
new file mode 100644
index 0000000..21db020
--- /dev/null
+++ b/arch/arm/mach-imx/clk-fixup-div.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include "clk.h"
+
+#define to_clk_div(_hw) container_of(_hw, struct clk_divider, hw)
+#define div_mask(d)	((1 << (d->width)) - 1)
+
+/**
+ * struct clk_fixup_div - imx integer fixup divider clock
+ * @divider: the parent class
+ * @ops: pointer to clk_ops of parent class
+ * @fixup: a hook to fixup the write value
+ *
+ * The imx fixup divider clock is a subclass of basic clk_divider
+ * with an addtional fixup hook.
+ */
+struct clk_fixup_div {
+	struct clk_divider divider;
+	const struct clk_ops *ops;
+	void (*fixup)(u32 *val);
+};
+
+static inline struct clk_fixup_div *to_clk_fixup_div(struct clk_hw *hw)
+{
+	struct clk_divider *divider = to_clk_div(hw);
+
+	return container_of(divider, struct clk_fixup_div, divider);
+}
+
+static unsigned long clk_fixup_div_recalc_rate(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	struct clk_fixup_div *fixup_div = to_clk_fixup_div(hw);
+
+	return fixup_div->ops->recalc_rate(&fixup_div->divider.hw, parent_rate);
+}
+
+static long clk_fixup_div_round_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long *prate)
+{
+	struct clk_fixup_div *fixup_div = to_clk_fixup_div(hw);
+
+	return fixup_div->ops->round_rate(&fixup_div->divider.hw, rate, prate);
+}
+
+static int clk_fixup_div_set_rate(struct clk_hw *hw, unsigned long rate,
+			    unsigned long parent_rate)
+{
+	struct clk_fixup_div *fixup_div = to_clk_fixup_div(hw);
+	struct clk_divider *div = to_clk_div(hw);
+	unsigned int divider, value;
+	unsigned long flags = 0;
+	u32 val;
+
+	divider = parent_rate / rate;
+
+	/* Zero based divider */
+	value = divider - 1;
+
+	if (value > div_mask(div))
+		value = div_mask(div);
+
+	spin_lock_irqsave(div->lock, flags);
+
+	val = readl(div->reg);
+	val &= ~(div_mask(div) << div->shift);
+	val |= value << div->shift;
+	fixup_div->fixup(&val);
+	writel(val, div->reg);
+
+	spin_unlock_irqrestore(div->lock, flags);
+
+	return 0;
+}
+
+static const struct clk_ops clk_fixup_div_ops = {
+	.recalc_rate = clk_fixup_div_recalc_rate,
+	.round_rate = clk_fixup_div_round_rate,
+	.set_rate = clk_fixup_div_set_rate,
+};
+
+struct clk *imx_clk_fixup_divider(const char *name, const char *parent,
+				  void __iomem *reg, u8 shift, u8 width,
+				  void (*fixup)(u32 *val))
+{
+	struct clk_fixup_div *fixup_div;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	if (!fixup)
+		return ERR_PTR(-EINVAL);
+
+	fixup_div = kzalloc(sizeof(*fixup_div), GFP_KERNEL);
+	if (!fixup_div)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &clk_fixup_div_ops;
+	init.flags = CLK_SET_RATE_PARENT;
+	init.parent_names = parent ? &parent : NULL;
+	init.num_parents = parent ? 1 : 0;
+
+	fixup_div->divider.reg = reg;
+	fixup_div->divider.shift = shift;
+	fixup_div->divider.width = width;
+	fixup_div->divider.lock = &imx_ccm_lock;
+	fixup_div->divider.hw.init = &init;
+	fixup_div->ops = &clk_divider_ops;
+	fixup_div->fixup = fixup;
+
+	clk = clk_register(NULL, &fixup_div->divider.hw);
+	if (IS_ERR(clk))
+		kfree(fixup_div);
+
+	return clk;
+}
diff --git a/arch/arm/mach-imx/clk-fixup-mux.c b/arch/arm/mach-imx/clk-fixup-mux.c
new file mode 100644
index 0000000..0d40b35
--- /dev/null
+++ b/arch/arm/mach-imx/clk-fixup-mux.c
@@ -0,0 +1,108 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include "clk.h"
+
+#define to_clk_mux(_hw) container_of(_hw, struct clk_mux, hw)
+
+/**
+ * struct clk_fixup_mux - imx integer fixup multiplexer clock
+ * @mux: the parent class
+ * @ops: pointer to clk_ops of parent class
+ * @fixup: a hook to fixup the write value
+ *
+ * The imx fixup multiplexer clock is a subclass of basic clk_mux
+ * with an addtional fixup hook.
+ */
+struct clk_fixup_mux {
+	struct clk_mux mux;
+	const struct clk_ops *ops;
+	void (*fixup)(u32 *val);
+};
+
+static inline struct clk_fixup_mux *to_clk_fixup_mux(struct clk_hw *hw)
+{
+	struct clk_mux *mux = to_clk_mux(hw);
+
+	return container_of(mux, struct clk_fixup_mux, mux);
+}
+
+static u8 clk_fixup_mux_get_parent(struct clk_hw *hw)
+{
+	struct clk_fixup_mux *fixup_mux = to_clk_fixup_mux(hw);
+
+	return fixup_mux->ops->get_parent(&fixup_mux->mux.hw);
+}
+
+static int clk_fixup_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_fixup_mux *fixup_mux = to_clk_fixup_mux(hw);
+	struct clk_mux *mux = to_clk_mux(hw);
+	unsigned long flags = 0;
+	u32 val;
+
+	spin_lock_irqsave(mux->lock, flags);
+
+	val = readl(mux->reg);
+	val &= ~(mux->mask << mux->shift);
+	val |= index << mux->shift;
+	fixup_mux->fixup(&val);
+	writel(val, mux->reg);
+
+	spin_unlock_irqrestore(mux->lock, flags);
+
+	return 0;
+}
+
+static const struct clk_ops clk_fixup_mux_ops = {
+	.get_parent = clk_fixup_mux_get_parent,
+	.set_parent = clk_fixup_mux_set_parent,
+};
+
+struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg,
+			      u8 shift, u8 width, const char **parents,
+			      int num_parents, void (*fixup)(u32 *val))
+{
+	struct clk_fixup_mux *fixup_mux;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	if (!fixup)
+		return ERR_PTR(-EINVAL);
+
+	fixup_mux = kzalloc(sizeof(*fixup_mux), GFP_KERNEL);
+	if (!fixup_mux)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &clk_fixup_mux_ops;
+	init.parent_names = parents;
+	init.num_parents = num_parents;
+	init.flags = 0;
+
+	fixup_mux->mux.reg = reg;
+	fixup_mux->mux.shift = shift;
+	fixup_mux->mux.mask = BIT(width) - 1;
+	fixup_mux->mux.lock = &imx_ccm_lock;
+	fixup_mux->mux.hw.init = &init;
+	fixup_mux->ops = &clk_mux_ops;
+	fixup_mux->fixup = fixup;
+
+	clk = clk_register(NULL, &fixup_mux->mux.hw);
+	if (IS_ERR(clk))
+		kfree(fixup_mux);
+
+	return clk;
+}
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index c3cfa41..c6b40f3 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -285,7 +285,7 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL);
 	clk_register_clkdev(clk[rtc_ipg_gate], NULL, "imx21-rtc");
 	clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL);
-	clk_register_clkdev(clk[cpu_div], NULL, "cpufreq-cpu0.0");
+	clk_register_clkdev(clk[cpu_div], NULL, "cpu0");
 	clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL);
 
 	mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 9afac26..ce37af2 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -11,8 +11,12 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/clkdev.h>
+#include <linux/clk-provider.h>
 #include <linux/of.h>
 #include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include "crm-regs-imx5.h"
 #include "clk.h"
@@ -119,7 +123,7 @@ enum imx5_clks {
 	srtc_gate, pata_gate, sata_gate, spdif_xtal_sel, spdif0_sel,
 	spdif1_sel, spdif0_pred, spdif0_podf, spdif1_pred, spdif1_podf,
 	spdif0_com_s, spdif1_com_sel, spdif0_gate, spdif1_gate, spdif_ipg_gate,
-	clk_max
+	ocram, clk_max
 };
 
 static struct clk *clk[clk_max];
@@ -131,8 +135,6 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 {
 	int i;
 
-	of_clk_init(NULL);
-
 	clk[dummy] = imx_clk_fixed("dummy", 0);
 	clk[ckil] = imx_obtain_fixed_clock("ckil", rate_ckil);
 	clk[osc] = imx_obtain_fixed_clock("osc", rate_osc);
@@ -328,7 +330,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
 	clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "imx-ssi.2");
 	clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
-	clk_register_clkdev(clk[cpu_podf], NULL, "cpufreq-cpu0.0");
+	clk_register_clkdev(clk[cpu_podf], NULL, "cpu0");
 	clk_register_clkdev(clk[iim_gate], "iim", NULL);
 	clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.0");
 	clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.1");
@@ -397,7 +399,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 				mx51_spdif_xtal_sel, ARRAY_SIZE(mx51_spdif_xtal_sel));
 	clk[spdif1_sel] = imx_clk_mux("spdif1_sel", MXC_CCM_CSCMR2, 2, 2,
 				spdif_sel, ARRAY_SIZE(spdif_sel));
-	clk[spdif1_pred] = imx_clk_divider("spdif1_podf", "spdif1_sel", MXC_CCM_CDCDR, 16, 3);
+	clk[spdif1_pred] = imx_clk_divider("spdif1_pred", "spdif1_sel", MXC_CCM_CDCDR, 16, 3);
 	clk[spdif1_podf] = imx_clk_divider("spdif1_podf", "spdif1_pred", MXC_CCM_CDCDR, 9, 6);
 	clk[spdif1_com_sel] = imx_clk_mux("spdif1_com_sel", MXC_CCM_CSCMR2, 5, 1,
 				mx51_spdif1_com_sel, ARRAY_SIZE(mx51_spdif1_com_sel));
@@ -465,12 +467,17 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	return 0;
 }
 
-int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
-			unsigned long rate_ckih1, unsigned long rate_ckih2)
+static void __init mx51_clocks_init_dt(struct device_node *np)
 {
-	int i;
+	mx51_clocks_init(0, 0, 0, 0);
+}
+CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init_dt);
+
+static void __init mx53_clocks_init(struct device_node *np)
+{
+	int i, irq;
 	unsigned long r;
-	struct device_node *np;
+	void __iomem *base;
 
 	clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE);
 	clk[pll2_sw] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE);
@@ -506,6 +513,7 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 				mx53_can_sel, ARRAY_SIZE(mx53_can_sel));
 	clk[can1_serial_gate] = imx_clk_gate2("can1_serial_gate", "can_sel", MXC_CCM_CCGR6, 22);
 	clk[can1_ipg_gate] = imx_clk_gate2("can1_ipg_gate", "ipg", MXC_CCM_CCGR6, 20);
+	clk[ocram] = imx_clk_gate2("ocram", "ahb", MXC_CCM_CCGR6, 2);
 	clk[can2_serial_gate] = imx_clk_gate2("can2_serial_gate", "can_sel", MXC_CCM_CCGR4, 8);
 	clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 6);
 	clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22);
@@ -528,12 +536,11 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 			pr_err("i.MX53 clk %d: register failed with %ld\n",
 				i, PTR_ERR(clk[i]));
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx53-ccm");
 	clk_data.clks = clk;
 	clk_data.clk_num = ARRAY_SIZE(clk);
 	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
 
-	mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
+	mx5_clocks_common_init(0, 0, 0, 0);
 
 	clk_register_clkdev(clk[vpu_gate], NULL, "imx53-vpu.0");
 	clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
@@ -556,9 +563,6 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	clk_set_rate(clk[esdhc_a_podf], 200000000);
 	clk_set_rate(clk[esdhc_b_podf], 200000000);
 
-	/* System timer */
-	mxc_timer_init(MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), MX53_INT_GPT);
-
 	clk_prepare_enable(clk[iim_gate]);
 	imx_print_silicon_rev("i.MX53", mx53_revision());
 	clk_disable_unprepare(clk[iim_gate]);
@@ -566,15 +570,10 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	r = clk_round_rate(clk[usboh3_per_gate], 54000000);
 	clk_set_rate(clk[usboh3_per_gate], r);
 
-	return 0;
-}
-
-int __init mx51_clocks_init_dt(void)
-{
-	return mx51_clocks_init(0, 0, 0, 0);
-}
-
-int __init mx53_clocks_init_dt(void)
-{
-	return mx53_clocks_init(0, 0, 0, 0);
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx53-gpt");
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+	irq = irq_of_parse_and_map(np, 0);
+	mxc_timer_init(base, irq);
 }
+CLK_OF_DECLARE(imx53_ccm, "fsl,imx53-ccm", mx53_clocks_init);
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 86567d9..d756d91 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -14,7 +14,6 @@
 #include <linux/types.h>
 #include <linux/clk.h>
 #include <linux/clkdev.h>
-#include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/of.h>
@@ -25,155 +24,6 @@
 #include "common.h"
 #include "hardware.h"
 
-#define CCR				0x0
-#define BM_CCR_WB_COUNT			(0x7 << 16)
-#define BM_CCR_RBC_BYPASS_COUNT		(0x3f << 21)
-#define BM_CCR_RBC_EN			(0x1 << 27)
-
-#define CCGR0				0x68
-#define CCGR1				0x6c
-#define CCGR2				0x70
-#define CCGR3				0x74
-#define CCGR4				0x78
-#define CCGR5				0x7c
-#define CCGR6				0x80
-#define CCGR7				0x84
-
-#define CLPCR				0x54
-#define BP_CLPCR_LPM			0
-#define BM_CLPCR_LPM			(0x3 << 0)
-#define BM_CLPCR_BYPASS_PMIC_READY	(0x1 << 2)
-#define BM_CLPCR_ARM_CLK_DIS_ON_LPM	(0x1 << 5)
-#define BM_CLPCR_SBYOS			(0x1 << 6)
-#define BM_CLPCR_DIS_REF_OSC		(0x1 << 7)
-#define BM_CLPCR_VSTBY			(0x1 << 8)
-#define BP_CLPCR_STBY_COUNT		9
-#define BM_CLPCR_STBY_COUNT		(0x3 << 9)
-#define BM_CLPCR_COSC_PWRDOWN		(0x1 << 11)
-#define BM_CLPCR_WB_PER_AT_LPM		(0x1 << 16)
-#define BM_CLPCR_WB_CORE_AT_LPM		(0x1 << 17)
-#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS	(0x1 << 19)
-#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS	(0x1 << 21)
-#define BM_CLPCR_MASK_CORE0_WFI		(0x1 << 22)
-#define BM_CLPCR_MASK_CORE1_WFI		(0x1 << 23)
-#define BM_CLPCR_MASK_CORE2_WFI		(0x1 << 24)
-#define BM_CLPCR_MASK_CORE3_WFI		(0x1 << 25)
-#define BM_CLPCR_MASK_SCU_IDLE		(0x1 << 26)
-#define BM_CLPCR_MASK_L2CC_IDLE		(0x1 << 27)
-
-#define CGPR				0x64
-#define BM_CGPR_CHICKEN_BIT		(0x1 << 17)
-
-static void __iomem *ccm_base;
-
-void imx6q_set_chicken_bit(void)
-{
-	u32 val = readl_relaxed(ccm_base + CGPR);
-
-	val |= BM_CGPR_CHICKEN_BIT;
-	writel_relaxed(val, ccm_base + CGPR);
-}
-
-static void imx6q_enable_rbc(bool enable)
-{
-	u32 val;
-	static bool last_rbc_mode;
-
-	if (last_rbc_mode == enable)
-		return;
-	/*
-	 * need to mask all interrupts in GPC before
-	 * operating RBC configurations
-	 */
-	imx_gpc_mask_all();
-
-	/* configure RBC enable bit */
-	val = readl_relaxed(ccm_base + CCR);
-	val &= ~BM_CCR_RBC_EN;
-	val |= enable ? BM_CCR_RBC_EN : 0;
-	writel_relaxed(val, ccm_base + CCR);
-
-	/* configure RBC count */
-	val = readl_relaxed(ccm_base + CCR);
-	val &= ~BM_CCR_RBC_BYPASS_COUNT;
-	val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0;
-	writel(val, ccm_base + CCR);
-
-	/*
-	 * need to delay at least 2 cycles of CKIL(32K)
-	 * due to hardware design requirement, which is
-	 * ~61us, here we use 65us for safe
-	 */
-	udelay(65);
-
-	/* restore GPC interrupt mask settings */
-	imx_gpc_restore_all();
-
-	last_rbc_mode = enable;
-}
-
-static void imx6q_enable_wb(bool enable)
-{
-	u32 val;
-	static bool last_wb_mode;
-
-	if (last_wb_mode == enable)
-		return;
-
-	/* configure well bias enable bit */
-	val = readl_relaxed(ccm_base + CLPCR);
-	val &= ~BM_CLPCR_WB_PER_AT_LPM;
-	val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0;
-	writel_relaxed(val, ccm_base + CLPCR);
-
-	/* configure well bias count */
-	val = readl_relaxed(ccm_base + CCR);
-	val &= ~BM_CCR_WB_COUNT;
-	val |= enable ? BM_CCR_WB_COUNT : 0;
-	writel_relaxed(val, ccm_base + CCR);
-
-	last_wb_mode = enable;
-}
-
-int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
-{
-	u32 val = readl_relaxed(ccm_base + CLPCR);
-
-	val &= ~BM_CLPCR_LPM;
-	switch (mode) {
-	case WAIT_CLOCKED:
-		imx6q_enable_wb(false);
-		imx6q_enable_rbc(false);
-		break;
-	case WAIT_UNCLOCKED:
-		val |= 0x1 << BP_CLPCR_LPM;
-		val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM;
-		break;
-	case STOP_POWER_ON:
-		val |= 0x2 << BP_CLPCR_LPM;
-		break;
-	case WAIT_UNCLOCKED_POWER_OFF:
-		val |= 0x1 << BP_CLPCR_LPM;
-		val &= ~BM_CLPCR_VSTBY;
-		val &= ~BM_CLPCR_SBYOS;
-		break;
-	case STOP_POWER_OFF:
-		val |= 0x2 << BP_CLPCR_LPM;
-		val |= 0x3 << BP_CLPCR_STBY_COUNT;
-		val |= BM_CLPCR_VSTBY;
-		val |= BM_CLPCR_SBYOS;
-		imx6q_enable_wb(true);
-		imx6q_enable_rbc(true);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	writel_relaxed(val, ccm_base + CLPCR);
-
-	return 0;
-}
-
 static const char *step_sels[]	= { "osc", "pll2_pfd2_396m", };
 static const char *pll1_sw_sels[]	= { "pll1_sys", "step", };
 static const char *periph_pre_sels[]	= { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", };
@@ -182,7 +32,7 @@ static const char *periph2_clk2_sels[]	= { "pll3_usb_otg", "pll2_bus", };
 static const char *periph_sels[]	= { "periph_pre", "periph_clk2", };
 static const char *periph2_sels[]	= { "periph2_pre", "periph2_clk2", };
 static const char *axi_sels[]		= { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", };
-static const char *audio_sels[]	= { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
+static const char *audio_sels[]	= { "pll4_audio_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
 static const char *gpu_axi_sels[]	= { "axi", "ahb", };
 static const char *gpu2d_core_sels[]	= { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
 static const char *gpu3d_core_sels[]	= { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
@@ -196,7 +46,7 @@ static const char *ipu2_di0_sels[]	= { "ipu2_di0_pre", "dummy", "dummy", "ldb_di
 static const char *ipu2_di1_sels[]	= { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
 static const char *hsi_tx_sels[]	= { "pll3_120m", "pll2_pfd2_396m", };
 static const char *pcie_axi_sels[]	= { "axi", "ahb", };
-static const char *ssi_sels[]		= { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", };
+static const char *ssi_sels[]		= { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", };
 static const char *usdhc_sels[]	= { "pll2_pfd2_396m", "pll2_pfd0_352m", };
 static const char *enfc_sels[]	= { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
 static const char *emi_sels[]		= { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", };
@@ -205,7 +55,23 @@ static const char *vdo_axi_sels[]	= { "axi", "ahb", };
 static const char *vpu_axi_sels[]	= { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", };
 static const char *cko1_sels[]	= { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
 				    "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
-				    "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_post_div", };
+				    "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio_div", };
+static const char *cko2_sels[] = {
+	"mmdc_ch0_axi", "mmdc_ch1_axi", "usdhc4", "usdhc1",
+	"gpu2d_axi", "dummy", "ecspi_root", "gpu3d_axi",
+	"usdhc3", "dummy", "arm", "ipu1",
+	"ipu2", "vdo_axi", "osc", "gpu2d_core",
+	"gpu3d_core", "usdhc2", "ssi1", "ssi2",
+	"ssi3", "gpu3d_shader", "vpu_axi", "can_root",
+	"ldb_di0", "ldb_di1", "esai", "eim_slow",
+	"uart_serial", "spdif", "asrc", "hsi_tx",
+};
+static const char *cko_sels[] = { "cko1", "cko2", };
+static const char *lvds_sels[] = {
+	"dummy", "dummy", "dummy", "dummy", "dummy", "dummy",
+	"pll4_audio", "pll5_video", "pll8_mlb", "enet_ref",
+	"pcie_ref", "sata_ref",
+};
 
 enum mx6q_clks {
 	dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
@@ -239,7 +105,9 @@ enum mx6q_clks {
 	pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg,
 	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
 	sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
-	usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow, clk_max
+	usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow,
+	spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, pll4_audio_div,
+	lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, clk_max
 };
 
 static struct clk *clk[clk_max];
@@ -276,6 +144,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	struct device_node *np;
 	void __iomem *base;
 	int i, irq;
+	int ret;
 
 	clk[dummy] = imx_clk_fixed("dummy", 0);
 	clk[ckil] = imx_obtain_fixed_clock("ckil", 0);
@@ -287,7 +156,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	WARN_ON(!base);
 
 	/* Audio/video PLL post dividers do not work on i.MX6q revision 1.0 */
-	if (cpu_is_imx6q() && imx6q_revision() == IMX_CHIP_REVISION_1_0) {
+	if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_1_0) {
 		post_div_table[1].div = 1;
 		post_div_table[2].div = 1;
 		video_div_table[1].div = 1;
@@ -329,6 +198,18 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 			base + 0xe0, 0, 2, 0, clk_enet_ref_table,
 			&imx_ccm_lock);
 
+	clk[lvds1_sel] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+	clk[lvds2_sel] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+
+	/*
+	 * lvds1_gate and lvds2_gate are pseudo-gates.  Both can be
+	 * independently configured as clock inputs or outputs.  We treat
+	 * the "output_enable" bit as a gate, even though it's really just
+	 * enabling clock output.
+	 */
+	clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "dummy", base + 0x160, 10);
+	clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "dummy", base + 0x160, 11);
+
 	/*                                name              parent_name        reg       idx */
 	clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus",     base + 0x100, 0);
 	clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus",     base + 0x100, 1);
@@ -346,13 +227,15 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[twd]       = imx_clk_fixed_factor("twd",       "arm",            1, 2);
 
 	clk[pll4_post_div] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
+	clk[pll4_audio_div] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
 	clk[pll5_post_div] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
 	clk[pll5_video_div] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
 
 	np = ccm_node;
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
-	ccm_base = base;
+
+	imx6q_pm_set_ccm_base(base);
 
 	/*                                  name                reg       shift width parent_names     num_parents */
 	clk[step]             = imx_clk_mux("step",	        base + 0xc,  8,  1, step_sels,	       ARRAY_SIZE(step_sels));
@@ -384,19 +267,21 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[ipu2_di1_sel]     = imx_clk_mux("ipu2_di1_sel",     base + 0x38, 9,  3, ipu2_di1_sels,     ARRAY_SIZE(ipu2_di1_sels));
 	clk[hsi_tx_sel]       = imx_clk_mux("hsi_tx_sel",       base + 0x30, 28, 1, hsi_tx_sels,       ARRAY_SIZE(hsi_tx_sels));
 	clk[pcie_axi_sel]     = imx_clk_mux("pcie_axi_sel",     base + 0x18, 10, 1, pcie_axi_sels,     ARRAY_SIZE(pcie_axi_sels));
-	clk[ssi1_sel]         = imx_clk_mux("ssi1_sel",         base + 0x1c, 10, 2, ssi_sels,          ARRAY_SIZE(ssi_sels));
-	clk[ssi2_sel]         = imx_clk_mux("ssi2_sel",         base + 0x1c, 12, 2, ssi_sels,          ARRAY_SIZE(ssi_sels));
-	clk[ssi3_sel]         = imx_clk_mux("ssi3_sel",         base + 0x1c, 14, 2, ssi_sels,          ARRAY_SIZE(ssi_sels));
-	clk[usdhc1_sel]       = imx_clk_mux("usdhc1_sel",       base + 0x1c, 16, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
-	clk[usdhc2_sel]       = imx_clk_mux("usdhc2_sel",       base + 0x1c, 17, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
-	clk[usdhc3_sel]       = imx_clk_mux("usdhc3_sel",       base + 0x1c, 18, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
-	clk[usdhc4_sel]       = imx_clk_mux("usdhc4_sel",       base + 0x1c, 19, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
+	clk[ssi1_sel]         = imx_clk_fixup_mux("ssi1_sel",   base + 0x1c, 10, 2, ssi_sels,          ARRAY_SIZE(ssi_sels),          imx_cscmr1_fixup);
+	clk[ssi2_sel]         = imx_clk_fixup_mux("ssi2_sel",   base + 0x1c, 12, 2, ssi_sels,          ARRAY_SIZE(ssi_sels),          imx_cscmr1_fixup);
+	clk[ssi3_sel]         = imx_clk_fixup_mux("ssi3_sel",   base + 0x1c, 14, 2, ssi_sels,          ARRAY_SIZE(ssi_sels),          imx_cscmr1_fixup);
+	clk[usdhc1_sel]       = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),        imx_cscmr1_fixup);
+	clk[usdhc2_sel]       = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),        imx_cscmr1_fixup);
+	clk[usdhc3_sel]       = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),        imx_cscmr1_fixup);
+	clk[usdhc4_sel]       = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),        imx_cscmr1_fixup);
 	clk[enfc_sel]         = imx_clk_mux("enfc_sel",         base + 0x2c, 16, 2, enfc_sels,         ARRAY_SIZE(enfc_sels));
-	clk[emi_sel]          = imx_clk_mux("emi_sel",          base + 0x1c, 27, 2, emi_sels,          ARRAY_SIZE(emi_sels));
-	clk[emi_slow_sel]     = imx_clk_mux("emi_slow_sel",     base + 0x1c, 29, 2, emi_slow_sels,     ARRAY_SIZE(emi_slow_sels));
+	clk[emi_sel]          = imx_clk_fixup_mux("emi_sel",      base + 0x1c, 27, 2, emi_sels,        ARRAY_SIZE(emi_sels),          imx_cscmr1_fixup);
+	clk[emi_slow_sel]     = imx_clk_fixup_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_slow_sels,   ARRAY_SIZE(emi_slow_sels),     imx_cscmr1_fixup);
 	clk[vdo_axi_sel]      = imx_clk_mux("vdo_axi_sel",      base + 0x18, 11, 1, vdo_axi_sels,      ARRAY_SIZE(vdo_axi_sels));
 	clk[vpu_axi_sel]      = imx_clk_mux("vpu_axi_sel",      base + 0x18, 14, 2, vpu_axi_sels,      ARRAY_SIZE(vpu_axi_sels));
 	clk[cko1_sel]         = imx_clk_mux("cko1_sel",         base + 0x60, 0,  4, cko1_sels,         ARRAY_SIZE(cko1_sels));
+	clk[cko2_sel]         = imx_clk_mux("cko2_sel",         base + 0x60, 16, 5, cko2_sels,         ARRAY_SIZE(cko2_sels));
+	clk[cko]              = imx_clk_mux("cko",              base + 0x60, 8, 1,  cko_sels,          ARRAY_SIZE(cko_sels));
 
 	/*                              name         reg      shift width busy: reg, shift parent_names  num_parents */
 	clk[periph]  = imx_clk_busy_mux("periph",  base + 0x14, 25,  1,   base + 0x48, 5,  periph_sels,  ARRAY_SIZE(periph_sels));
@@ -406,7 +291,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[periph_clk2]      = imx_clk_divider("periph_clk2",      "periph_clk2_sel",   base + 0x14, 27, 3);
 	clk[periph2_clk2]     = imx_clk_divider("periph2_clk2",     "periph2_clk2_sel",  base + 0x14, 0,  3);
 	clk[ipg]              = imx_clk_divider("ipg",              "ahb",               base + 0x14, 8,  2);
-	clk[ipg_per]          = imx_clk_divider("ipg_per",          "ipg",               base + 0x1c, 0,  6);
+	clk[ipg_per]          = imx_clk_fixup_divider("ipg_per",    "ipg",               base + 0x1c, 0,  6, imx_cscmr1_fixup);
 	clk[esai_pred]        = imx_clk_divider("esai_pred",        "esai_sel",          base + 0x28, 9,  3);
 	clk[esai_podf]        = imx_clk_divider("esai_podf",        "esai_pred",         base + 0x28, 25, 3);
 	clk[asrc_pred]        = imx_clk_divider("asrc_pred",        "asrc_sel",          base + 0x30, 12, 3);
@@ -442,10 +327,11 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[usdhc4_podf]      = imx_clk_divider("usdhc4_podf",      "usdhc4_sel",        base + 0x24, 22, 3);
 	clk[enfc_pred]        = imx_clk_divider("enfc_pred",        "enfc_sel",          base + 0x2c, 18, 3);
 	clk[enfc_podf]        = imx_clk_divider("enfc_podf",        "enfc_pred",         base + 0x2c, 21, 6);
-	clk[emi_podf]         = imx_clk_divider("emi_podf",         "emi_sel",           base + 0x1c, 20, 3);
-	clk[emi_slow_podf]    = imx_clk_divider("emi_slow_podf",    "emi_slow_sel",      base + 0x1c, 23, 3);
+	clk[emi_podf]         = imx_clk_fixup_divider("emi_podf",   "emi_sel",           base + 0x1c, 20, 3, imx_cscmr1_fixup);
+	clk[emi_slow_podf]    = imx_clk_fixup_divider("emi_slow_podf", "emi_slow_sel",   base + 0x1c, 23, 3, imx_cscmr1_fixup);
 	clk[vpu_axi_podf]     = imx_clk_divider("vpu_axi_podf",     "vpu_axi_sel",       base + 0x24, 25, 3);
 	clk[cko1_podf]        = imx_clk_divider("cko1_podf",        "cko1_sel",          base + 0x60, 4,  3);
+	clk[cko2_podf]        = imx_clk_divider("cko2_podf",        "cko2_sel",          base + 0x60, 21, 3);
 
 	/*                                            name                 parent_name    reg        shift width busy: reg, shift */
 	clk[axi]               = imx_clk_busy_divider("axi",               "axi_sel",     base + 0x14, 16,  3,   base + 0x48, 0);
@@ -486,6 +372,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[i2c3]         = imx_clk_gate2("i2c3",          "ipg_per",           base + 0x70, 10);
 	clk[iim]          = imx_clk_gate2("iim",           "ipg",               base + 0x70, 12);
 	clk[enfc]         = imx_clk_gate2("enfc",          "enfc_podf",         base + 0x70, 14);
+	clk[vdoa]         = imx_clk_gate2("vdoa",          "vdo_axi",           base + 0x70, 26);
 	clk[ipu1]         = imx_clk_gate2("ipu1",          "ipu1_podf",         base + 0x74, 0);
 	clk[ipu1_di0]     = imx_clk_gate2("ipu1_di0",      "ipu1_di0_sel",      base + 0x74, 2);
 	clk[ipu1_di1]     = imx_clk_gate2("ipu1_di1",      "ipu1_di1_sel",      base + 0x74, 4);
@@ -521,6 +408,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[sata]         = imx_clk_gate2("sata",          "ipg",               base + 0x7c, 4);
 	clk[sdma]         = imx_clk_gate2("sdma",          "ahb",               base + 0x7c, 6);
 	clk[spba]         = imx_clk_gate2("spba",          "ipg",               base + 0x7c, 12);
+	clk[spdif]        = imx_clk_gate2("spdif",         "spdif_podf",    	base + 0x7c, 14);
 	clk[ssi1_ipg]     = imx_clk_gate2("ssi1_ipg",      "ipg",               base + 0x7c, 18);
 	clk[ssi2_ipg]     = imx_clk_gate2("ssi2_ipg",      "ipg",               base + 0x7c, 20);
 	clk[ssi3_ipg]     = imx_clk_gate2("ssi3_ipg",      "ipg",               base + 0x7c, 22);
@@ -535,6 +423,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[vdo_axi]      = imx_clk_gate2("vdo_axi",       "vdo_axi_sel",       base + 0x80, 12);
 	clk[vpu_axi]      = imx_clk_gate2("vpu_axi",       "vpu_axi_podf",      base + 0x80, 14);
 	clk[cko1]         = imx_clk_gate("cko1",           "cko1_podf",         base + 0x60, 7);
+	clk[cko2]         = imx_clk_gate("cko2",           "cko2_podf",         base + 0x60, 24);
 
 	for (i = 0; i < ARRAY_SIZE(clk); i++)
 		if (IS_ERR(clk[i]))
@@ -554,7 +443,8 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk_register_clkdev(clk[pll4_post_div], "pll4_post_div", NULL);
 	clk_register_clkdev(clk[pll4_audio], "pll4_audio", NULL);
 
-	if (imx6q_revision() != IMX_CHIP_REVISION_1_0) {
+	if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) ||
+	    cpu_is_imx6dl()) {
 		clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]);
 		clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]);
 	}
@@ -574,8 +464,19 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 		clk_prepare_enable(clk[usbphy2_gate]);
 	}
 
-	/* Set initial power mode */
-	imx6q_set_lpm(WAIT_CLOCKED);
+	/*
+	 * Let's initially set up CLKO with OSC24M, since this configuration
+	 * is widely used by imx6q board designs to clock audio codec.
+	 */
+	ret = clk_set_parent(clk[cko2_sel], clk[osc]);
+	if (!ret)
+		ret = clk_set_parent(clk[cko], clk[cko2]);
+	if (ret)
+		pr_warn("failed to set up CLKO: %d\n", ret);
+
+	/* All existing boards with PCIe use LVDS1 */
+	if (IS_ENABLED(CONFIG_PCI_IMX6))
+		clk_set_parent(clk[lvds1_sel], clk[sata_ref]);
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
 	base = of_iomap(np, 0);
diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c
index a307ac2..c0c4ef5 100644
--- a/arch/arm/mach-imx/clk-imx6sl.c
+++ b/arch/arm/mach-imx/clk-imx6sl.c
@@ -127,6 +127,9 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
 
+	/* Reuse imx6q pm code */
+	imx6q_pm_set_ccm_base(base);
+
 	/*                                              name                reg       shift width parent_names     num_parents */
 	clks[IMX6SL_CLK_STEP]             = imx_clk_mux("step",             base + 0xc,  8,  1, step_sels,         ARRAY_SIZE(step_sels));
 	clks[IMX6SL_CLK_PLL1_SW]          = imx_clk_mux("pll1_sw",          base + 0xc,  2,  1, pll1_sw_sels,      ARRAY_SIZE(pll1_sw_sels));
@@ -138,14 +141,14 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	clks[IMX6SL_CLK_PERIPH_CLK2_SEL]  = imx_clk_mux("periph_clk2_sel",  base + 0x18, 12, 2, periph_clk2_sels,  ARRAY_SIZE(periph_clk2_sels));
 	clks[IMX6SL_CLK_CSI_SEL]          = imx_clk_mux("csi_sel",          base + 0x3c, 9,  2, csi_lcdif_sels,    ARRAY_SIZE(csi_lcdif_sels));
 	clks[IMX6SL_CLK_LCDIF_AXI_SEL]    = imx_clk_mux("lcdif_axi_sel",    base + 0x3c, 14, 2, csi_lcdif_sels,    ARRAY_SIZE(csi_lcdif_sels));
-	clks[IMX6SL_CLK_USDHC1_SEL]       = imx_clk_mux("usdhc1_sel",       base + 0x1c, 16, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
-	clks[IMX6SL_CLK_USDHC2_SEL]       = imx_clk_mux("usdhc2_sel",       base + 0x1c, 17, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
-	clks[IMX6SL_CLK_USDHC3_SEL]       = imx_clk_mux("usdhc3_sel",       base + 0x1c, 18, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
-	clks[IMX6SL_CLK_USDHC4_SEL]       = imx_clk_mux("usdhc4_sel",       base + 0x1c, 19, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
-	clks[IMX6SL_CLK_SSI1_SEL]         = imx_clk_mux("ssi1_sel",         base + 0x1c, 10, 2, ssi_sels,          ARRAY_SIZE(ssi_sels));
-	clks[IMX6SL_CLK_SSI2_SEL]         = imx_clk_mux("ssi2_sel",         base + 0x1c, 12, 2, ssi_sels,          ARRAY_SIZE(ssi_sels));
-	clks[IMX6SL_CLK_SSI3_SEL]         = imx_clk_mux("ssi3_sel",         base + 0x1c, 14, 2, ssi_sels,          ARRAY_SIZE(ssi_sels));
-	clks[IMX6SL_CLK_PERCLK_SEL]       = imx_clk_mux("perclk_sel",       base + 0x1c, 6,  1, perclk_sels,       ARRAY_SIZE(perclk_sels));
+	clks[IMX6SL_CLK_USDHC1_SEL]       = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),  imx_cscmr1_fixup);
+	clks[IMX6SL_CLK_USDHC2_SEL]       = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),  imx_cscmr1_fixup);
+	clks[IMX6SL_CLK_USDHC3_SEL]       = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),  imx_cscmr1_fixup);
+	clks[IMX6SL_CLK_USDHC4_SEL]       = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),  imx_cscmr1_fixup);
+	clks[IMX6SL_CLK_SSI1_SEL]         = imx_clk_fixup_mux("ssi1_sel",   base + 0x1c, 10, 2, ssi_sels,          ARRAY_SIZE(ssi_sels),    imx_cscmr1_fixup);
+	clks[IMX6SL_CLK_SSI2_SEL]         = imx_clk_fixup_mux("ssi2_sel",   base + 0x1c, 12, 2, ssi_sels,          ARRAY_SIZE(ssi_sels),    imx_cscmr1_fixup);
+	clks[IMX6SL_CLK_SSI3_SEL]         = imx_clk_fixup_mux("ssi3_sel",   base + 0x1c, 14, 2, ssi_sels,          ARRAY_SIZE(ssi_sels),    imx_cscmr1_fixup);
+	clks[IMX6SL_CLK_PERCLK_SEL]       = imx_clk_fixup_mux("perclk_sel", base + 0x1c, 6,  1, perclk_sels,       ARRAY_SIZE(perclk_sels), imx_cscmr1_fixup);
 	clks[IMX6SL_CLK_PXP_AXI_SEL]      = imx_clk_mux("pxp_axi_sel",      base + 0x34, 6,  3, epdc_pxp_sels,     ARRAY_SIZE(epdc_pxp_sels));
 	clks[IMX6SL_CLK_EPDC_AXI_SEL]     = imx_clk_mux("epdc_axi_sel",     base + 0x34, 15, 3, epdc_pxp_sels,     ARRAY_SIZE(epdc_pxp_sels));
 	clks[IMX6SL_CLK_GPU2D_OVG_SEL]    = imx_clk_mux("gpu2d_ovg_sel",    base + 0x18, 4,  2, gpu2d_ovg_sels,    ARRAY_SIZE(gpu2d_ovg_sels));
@@ -179,14 +182,14 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	clks[IMX6SL_CLK_SSI2_PODF]         = imx_clk_divider("ssi2_podf",         "ssi2_pred",         base + 0x2c, 0,  6);
 	clks[IMX6SL_CLK_SSI3_PRED]         = imx_clk_divider("ssi3_pred",         "ssi3_sel",          base + 0x28, 22, 3);
 	clks[IMX6SL_CLK_SSI3_PODF]         = imx_clk_divider("ssi3_podf",         "ssi3_pred",         base + 0x28, 16, 6);
-	clks[IMX6SL_CLK_PERCLK]            = imx_clk_divider("perclk",            "perclk_sel",        base + 0x1c, 0,  6);
+	clks[IMX6SL_CLK_PERCLK]            = imx_clk_fixup_divider("perclk",      "perclk_sel",        base + 0x1c, 0,  6, imx_cscmr1_fixup);
 	clks[IMX6SL_CLK_PXP_AXI_PODF]      = imx_clk_divider("pxp_axi_podf",      "pxp_axi_sel",       base + 0x34, 3,  3);
 	clks[IMX6SL_CLK_EPDC_AXI_PODF]     = imx_clk_divider("epdc_axi_podf",     "epdc_axi_sel",      base + 0x34, 12, 3);
 	clks[IMX6SL_CLK_GPU2D_OVG_PODF]    = imx_clk_divider("gpu2d_ovg_podf",    "gpu2d_ovg_sel",     base + 0x18, 26, 3);
 	clks[IMX6SL_CLK_GPU2D_PODF]        = imx_clk_divider("gpu2d_podf",        "gpu2d_sel",         base + 0x18, 29, 3);
 	clks[IMX6SL_CLK_LCDIF_PIX_PRED]    = imx_clk_divider("lcdif_pix_pred",    "lcdif_pix_sel",     base + 0x38, 3,  3);
 	clks[IMX6SL_CLK_EPDC_PIX_PRED]     = imx_clk_divider("epdc_pix_pred",     "epdc_pix_sel",      base + 0x38, 12, 3);
-	clks[IMX6SL_CLK_LCDIF_PIX_PODF]    = imx_clk_divider("lcdif_pix_podf",    "lcdif_pix_pred",    base + 0x1c, 20, 3);
+	clks[IMX6SL_CLK_LCDIF_PIX_PODF]    = imx_clk_fixup_divider("lcdif_pix_podf", "lcdif_pix_pred", base + 0x1c, 20, 3, imx_cscmr1_fixup);
 	clks[IMX6SL_CLK_EPDC_PIX_PODF]     = imx_clk_divider("epdc_pix_podf",     "epdc_pix_pred",     base + 0x18, 23, 3);
 	clks[IMX6SL_CLK_SPDIF0_PRED]       = imx_clk_divider("spdif0_pred",       "spdif0_sel",        base + 0x30, 25, 3);
 	clks[IMX6SL_CLK_SPDIF0_PODF]       = imx_clk_divider("spdif0_podf",       "spdif0_pred",       base + 0x30, 22, 3);
diff --git a/arch/arm/mach-imx/clk-pllv3.c b/arch/arm/mach-imx/clk-pllv3.c
index a9fad5f..f6640b6 100644
--- a/arch/arm/mach-imx/clk-pllv3.c
+++ b/arch/arm/mach-imx/clk-pllv3.c
@@ -48,7 +48,7 @@ struct clk_pllv3 {
 static int clk_pllv3_prepare(struct clk_hw *hw)
 {
 	struct clk_pllv3 *pll = to_clk_pllv3(hw);
-	unsigned long timeout = jiffies + msecs_to_jiffies(10);
+	unsigned long timeout;
 	u32 val;
 
 	val = readl_relaxed(pll->base);
@@ -59,12 +59,19 @@ static int clk_pllv3_prepare(struct clk_hw *hw)
 		val &= ~BM_PLL_POWER;
 	writel_relaxed(val, pll->base);
 
+	timeout = jiffies + msecs_to_jiffies(10);
 	/* Wait for PLL to lock */
-	while (!(readl_relaxed(pll->base) & BM_PLL_LOCK))
+	do {
+		if (readl_relaxed(pll->base) & BM_PLL_LOCK)
+			break;
 		if (time_after(jiffies, timeout))
-			return -ETIMEDOUT;
+			break;
+	} while (1);
 
-	return 0;
+	if (readl_relaxed(pll->base) & BM_PLL_LOCK)
+		return 0;
+	else
+		return -ETIMEDOUT;
 }
 
 static void clk_pllv3_unprepare(struct clk_hw *hw)
diff --git a/arch/arm/mach-imx/clk.c b/arch/arm/mach-imx/clk.c
index 55bc80a..edc35df 100644
--- a/arch/arm/mach-imx/clk.c
+++ b/arch/arm/mach-imx/clk.c
@@ -37,3 +37,29 @@ struct clk * __init imx_obtain_fixed_clock(
 		clk = imx_clk_fixed(name, rate);
 	return clk;
 }
+
+/*
+ * This fixups the register CCM_CSCMR1 write value.
+ * The write/read/divider values of the aclk_podf field
+ * of that register have the relationship described by
+ * the following table:
+ *
+ * write value       read value        divider
+ * 3b'000            3b'110            7
+ * 3b'001            3b'111            8
+ * 3b'010            3b'100            5
+ * 3b'011            3b'101            6
+ * 3b'100            3b'010            3
+ * 3b'101            3b'011            4
+ * 3b'110            3b'000            1
+ * 3b'111            3b'001            2(default)
+ *
+ * That's why we do the xor operation below.
+ */
+#define CSCMR1_FIXUP	0x00600000
+
+void imx_cscmr1_fixup(u32 *val)
+{
+	*val ^= CSCMR1_FIXUP;
+	return;
+}
diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h
index 0e4e8bb..048c5ad8 100644
--- a/arch/arm/mach-imx/clk.h
+++ b/arch/arm/mach-imx/clk.h
@@ -6,6 +6,8 @@
 
 extern spinlock_t imx_ccm_lock;
 
+extern void imx_cscmr1_fixup(u32 *val);
+
 struct clk *imx_clk_pllv1(const char *name, const char *parent,
 		void __iomem *base);
 
@@ -49,6 +51,14 @@ struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
 			     u8 width, void __iomem *busy_reg, u8 busy_shift,
 			     const char **parent_names, int num_parents);
 
+struct clk *imx_clk_fixup_divider(const char *name, const char *parent,
+				  void __iomem *reg, u8 shift, u8 width,
+				  void (*fixup)(u32 *val));
+
+struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg,
+			      u8 shift, u8 width, const char **parents,
+			      int num_parents, void (*fixup)(u32 *val));
+
 static inline struct clk *imx_clk_fixed(const char *name, int rate)
 {
 	return clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
@@ -79,7 +89,8 @@ static inline struct clk *imx_clk_gate(const char *name, const char *parent,
 static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg,
 		u8 shift, u8 width, const char **parents, int num_parents)
 {
-	return clk_register_mux(NULL, name, parents, num_parents, 0, reg, shift,
+	return clk_register_mux(NULL, name, parents, num_parents,
+			CLK_SET_RATE_NO_REPARENT, reg, shift,
 			width, 0, &imx_ccm_lock);
 }
 
@@ -88,7 +99,7 @@ static inline struct clk *imx_clk_mux_flags(const char *name,
 		int num_parents, unsigned long flags)
 {
 	return clk_register_mux(NULL, name, parents, num_parents,
-			flags, reg, shift, width, 0,
+			flags | CLK_SET_RATE_NO_REPARENT, reg, shift, width, 0,
 			&imx_ccm_lock);
 }
 
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index cb6c838..7cbe22d 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -13,74 +13,73 @@
 
 #include <linux/reboot.h>
 
+struct irq_data;
 struct platform_device;
 struct pt_regs;
 struct clk;
 enum mxc_cpu_pwr_mode;
 
-extern void mx1_map_io(void);
-extern void mx21_map_io(void);
-extern void mx25_map_io(void);
-extern void mx27_map_io(void);
-extern void mx31_map_io(void);
-extern void mx35_map_io(void);
-extern void mx51_map_io(void);
-extern void mx53_map_io(void);
-extern void imx1_init_early(void);
-extern void imx21_init_early(void);
-extern void imx25_init_early(void);
-extern void imx27_init_early(void);
-extern void imx31_init_early(void);
-extern void imx35_init_early(void);
-extern void imx51_init_early(void);
-extern void imx53_init_early(void);
-extern void mxc_init_irq(void __iomem *);
-extern void tzic_init_irq(void __iomem *);
-extern void mx1_init_irq(void);
-extern void mx21_init_irq(void);
-extern void mx25_init_irq(void);
-extern void mx27_init_irq(void);
-extern void mx31_init_irq(void);
-extern void mx35_init_irq(void);
-extern void mx51_init_irq(void);
-extern void mx53_init_irq(void);
-extern void imx1_soc_init(void);
-extern void imx21_soc_init(void);
-extern void imx25_soc_init(void);
-extern void imx27_soc_init(void);
-extern void imx31_soc_init(void);
-extern void imx35_soc_init(void);
-extern void imx51_soc_init(void);
-extern void imx51_init_late(void);
-extern void imx53_init_late(void);
-extern void epit_timer_init(void __iomem *base, int irq);
-extern void mxc_timer_init(void __iomem *, int);
-extern int mx1_clocks_init(unsigned long fref);
-extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
-extern int mx25_clocks_init(void);
-extern int mx27_clocks_init(unsigned long fref);
-extern int mx31_clocks_init(unsigned long fref);
-extern int mx35_clocks_init(void);
-extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
+void mx1_map_io(void);
+void mx21_map_io(void);
+void mx25_map_io(void);
+void mx27_map_io(void);
+void mx31_map_io(void);
+void mx35_map_io(void);
+void mx51_map_io(void);
+void mx53_map_io(void);
+void imx1_init_early(void);
+void imx21_init_early(void);
+void imx25_init_early(void);
+void imx27_init_early(void);
+void imx31_init_early(void);
+void imx35_init_early(void);
+void imx51_init_early(void);
+void imx53_init_early(void);
+void mxc_init_irq(void __iomem *);
+void tzic_init_irq(void __iomem *);
+void mx1_init_irq(void);
+void mx21_init_irq(void);
+void mx25_init_irq(void);
+void mx27_init_irq(void);
+void mx31_init_irq(void);
+void mx35_init_irq(void);
+void mx51_init_irq(void);
+void mx53_init_irq(void);
+void imx1_soc_init(void);
+void imx21_soc_init(void);
+void imx25_soc_init(void);
+void imx27_soc_init(void);
+void imx31_soc_init(void);
+void imx35_soc_init(void);
+void imx51_soc_init(void);
+void imx51_init_late(void);
+void imx53_init_late(void);
+void epit_timer_init(void __iomem *base, int irq);
+void mxc_timer_init(void __iomem *, int);
+int mx1_clocks_init(unsigned long fref);
+int mx21_clocks_init(unsigned long lref, unsigned long fref);
+int mx25_clocks_init(void);
+int mx27_clocks_init(unsigned long fref);
+int mx31_clocks_init(unsigned long fref);
+int mx35_clocks_init(void);
+int mx51_clocks_init(unsigned long ckil, unsigned long osc,
 			unsigned long ckih1, unsigned long ckih2);
-extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
-			unsigned long ckih1, unsigned long ckih2);
-extern int mx25_clocks_init_dt(void);
-extern int mx27_clocks_init_dt(void);
-extern int mx31_clocks_init_dt(void);
-extern int mx51_clocks_init_dt(void);
-extern int mx53_clocks_init_dt(void);
-extern struct platform_device *mxc_register_gpio(char *name, int id,
+int mx25_clocks_init_dt(void);
+int mx27_clocks_init_dt(void);
+int mx31_clocks_init_dt(void);
+struct platform_device *mxc_register_gpio(char *name, int id,
 	resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
-extern void mxc_set_cpu_type(unsigned int type);
-extern void mxc_restart(enum reboot_mode, const char *);
-extern void mxc_arch_reset_init(void __iomem *);
-extern void mxc_arch_reset_init_dt(void);
-extern int mx53_revision(void);
-extern int imx6q_revision(void);
-extern int mx53_display_revision(void);
-extern void imx_set_aips(void __iomem *);
-extern int mxc_device_init(void);
+void mxc_set_cpu_type(unsigned int type);
+void mxc_restart(enum reboot_mode, const char *);
+void mxc_arch_reset_init(void __iomem *);
+void mxc_arch_reset_init_dt(void);
+int mx53_revision(void);
+void imx_set_aips(void __iomem *);
+int mxc_device_init(void);
+void imx_set_soc_revision(unsigned int rev);
+unsigned int imx_get_soc_revision(void);
+void imx_init_revision_from_anatop(void);
+struct device *imx_soc_device_init(void);
 
 enum mxc_cpu_pwr_mode {
 	WAIT_CLOCKED,		/* wfi only */
@@ -97,8 +96,8 @@ enum mx3_cpu_pwr_mode {
 	MX3_SLEEP,
 };
 
-extern void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode);
-extern void imx_print_silicon_rev(const char *cpu, int srev);
+void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode);
+void imx_print_silicon_rev(const char *cpu, int srev);
 
 void avic_handle_irq(struct pt_regs *);
 void tzic_handle_irq(struct pt_regs *);
@@ -112,55 +111,65 @@ void tzic_handle_irq(struct pt_regs *);
 #define imx51_handle_irq tzic_handle_irq
 #define imx53_handle_irq tzic_handle_irq
 
-extern void imx_enable_cpu(int cpu, bool enable);
-extern void imx_set_cpu_jump(int cpu, void *jump_addr);
-extern u32 imx_get_cpu_arg(int cpu);
-extern void imx_set_cpu_arg(int cpu, u32 arg);
-extern void v7_cpu_resume(void);
+void imx_enable_cpu(int cpu, bool enable);
+void imx_set_cpu_jump(int cpu, void *jump_addr);
+u32 imx_get_cpu_arg(int cpu);
+void imx_set_cpu_arg(int cpu, u32 arg);
+void v7_cpu_resume(void);
 #ifdef CONFIG_SMP
-extern void v7_secondary_startup(void);
-extern void imx_scu_map_io(void);
-extern void imx_smp_prepare(void);
-extern void imx_scu_standby_enable(void);
+void v7_secondary_startup(void);
+void imx_scu_map_io(void);
+void imx_smp_prepare(void);
+void imx_scu_standby_enable(void);
 #else
 static inline void imx_scu_map_io(void) {}
 static inline void imx_smp_prepare(void) {}
 static inline void imx_scu_standby_enable(void) {}
 #endif
-extern void imx_src_init(void);
-extern void imx_src_prepare_restart(void);
-extern void imx_gpc_init(void);
-extern void imx_gpc_pre_suspend(void);
-extern void imx_gpc_post_resume(void);
-extern void imx_gpc_mask_all(void);
-extern void imx_gpc_restore_all(void);
-extern void imx_anatop_init(void);
-extern void imx_anatop_pre_suspend(void);
-extern void imx_anatop_post_resume(void);
-extern void imx_anatop_usb_chrg_detect_disable(void);
-extern u32 imx_anatop_get_digprog(void);
-extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
-extern void imx6q_set_chicken_bit(void);
-
-extern void imx_cpu_die(unsigned int cpu);
-extern int imx_cpu_kill(unsigned int cpu);
+void imx_src_init(void);
+#ifdef CONFIG_HAVE_IMX_SRC
+void imx_src_prepare_restart(void);
+#else
+static inline void imx_src_prepare_restart(void) {}
+#endif
+void imx_gpc_init(void);
+void imx_gpc_pre_suspend(void);
+void imx_gpc_post_resume(void);
+void imx_gpc_mask_all(void);
+void imx_gpc_restore_all(void);
+void imx_gpc_irq_mask(struct irq_data *d);
+void imx_gpc_irq_unmask(struct irq_data *d);
+void imx_anatop_init(void);
+void imx_anatop_pre_suspend(void);
+void imx_anatop_post_resume(void);
+int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
+void imx6q_set_chicken_bit(void);
+
+void imx_cpu_die(unsigned int cpu);
+int imx_cpu_kill(unsigned int cpu);
 
 #ifdef CONFIG_PM
-extern void imx6q_pm_init(void);
-extern void imx51_pm_init(void);
-extern void imx53_pm_init(void);
+void imx6q_pm_init(void);
+void imx6q_pm_set_ccm_base(void __iomem *base);
+void imx5_pm_init(void);
 #else
 static inline void imx6q_pm_init(void) {}
-static inline void imx51_pm_init(void) {}
-static inline void imx53_pm_init(void) {}
+static inline void imx6q_pm_set_ccm_base(void __iomem *base) {}
+static inline void imx5_pm_init(void) {}
 #endif
 
 #ifdef CONFIG_NEON
-extern int mx51_neon_fixup(void);
+int mx51_neon_fixup(void);
 #else
 static inline int mx51_neon_fixup(void) { return 0; }
 #endif
 
+#ifdef CONFIG_CACHE_L2X0
+void imx_init_l2cache(void);
+#else
+static inline void imx_init_l2cache(void) {}
+#endif
+
 extern struct smp_operations imx_smp_ops;
 
 #endif
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index e70e3ac..ba3b498 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -1,6 +1,9 @@
-
+#include <linux/err.h>
 #include <linux/module.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
 
 #include "hardware.h"
 #include "common.h"
@@ -8,11 +11,23 @@
 unsigned int __mxc_cpu_type;
 EXPORT_SYMBOL(__mxc_cpu_type);
 
+static unsigned int imx_soc_revision;
+
 void mxc_set_cpu_type(unsigned int type)
 {
 	__mxc_cpu_type = type;
 }
 
+void imx_set_soc_revision(unsigned int rev)
+{
+	imx_soc_revision = rev;
+}
+
+unsigned int imx_get_soc_revision(void)
+{
+	return imx_soc_revision;
+}
+
 void imx_print_silicon_rev(const char *cpu, int srev)
 {
 	if (srev == IMX_CHIP_REVISION_UNKNOWN)
@@ -44,3 +59,81 @@ void __init imx_set_aips(void __iomem *base)
 	reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
 	__raw_writel(reg, base + 0x50);
 }
+
+struct device * __init imx_soc_device_init(void)
+{
+	struct soc_device_attribute *soc_dev_attr;
+	struct soc_device *soc_dev;
+	struct device_node *root;
+	const char *soc_id;
+	int ret;
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		return NULL;
+
+	soc_dev_attr->family = "Freescale i.MX";
+
+	root = of_find_node_by_path("/");
+	ret = of_property_read_string(root, "model", &soc_dev_attr->machine);
+	of_node_put(root);
+	if (ret)
+		goto free_soc;
+
+	switch (__mxc_cpu_type) {
+	case MXC_CPU_MX1:
+		soc_id = "i.MX1";
+		break;
+	case MXC_CPU_MX21:
+		soc_id = "i.MX21";
+		break;
+	case MXC_CPU_MX25:
+		soc_id = "i.MX25";
+		break;
+	case MXC_CPU_MX27:
+		soc_id = "i.MX27";
+		break;
+	case MXC_CPU_MX31:
+		soc_id = "i.MX31";
+		break;
+	case MXC_CPU_MX35:
+		soc_id = "i.MX35";
+		break;
+	case MXC_CPU_MX51:
+		soc_id = "i.MX51";
+		break;
+	case MXC_CPU_MX53:
+		soc_id = "i.MX53";
+		break;
+	case MXC_CPU_IMX6SL:
+		soc_id = "i.MX6SL";
+		break;
+	case MXC_CPU_IMX6DL:
+		soc_id = "i.MX6DL";
+		break;
+	case MXC_CPU_IMX6Q:
+		soc_id = "i.MX6Q";
+		break;
+	default:
+		soc_id = "Unknown";
+	}
+	soc_dev_attr->soc_id = soc_id;
+
+	soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d.%d",
+					   (imx_soc_revision >> 4) & 0xf,
+					   imx_soc_revision & 0xf);
+	if (!soc_dev_attr->revision)
+		goto free_soc;
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev))
+		goto free_rev;
+
+	return soc_device_to_device(soc_dev);
+
+free_rev:
+	kfree(soc_dev_attr->revision);
+free_soc:
+	kfree(soc_dev_attr);
+	return NULL;
+}
diff --git a/arch/arm/mach-imx/epit.c b/arch/arm/mach-imx/epit.c
index e02de18..074b1a8 100644
--- a/arch/arm/mach-imx/epit.c
+++ b/arch/arm/mach-imx/epit.c
@@ -171,7 +171,7 @@ static irqreturn_t epit_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction epit_timer_irq = {
 	.name		= "i.MX EPIT Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= epit_timer_interrupt,
 };
 
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index 44a65e9..586e017 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -90,7 +90,7 @@ void imx_gpc_restore_all(void)
 		writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4);
 }
 
-static void imx_gpc_irq_unmask(struct irq_data *d)
+void imx_gpc_irq_unmask(struct irq_data *d)
 {
 	void __iomem *reg;
 	u32 val;
@@ -105,7 +105,7 @@ static void imx_gpc_irq_unmask(struct irq_data *d)
 	writel_relaxed(val, reg);
 }
 
-static void imx_gpc_irq_mask(struct irq_data *d)
+void imx_gpc_irq_mask(struct irq_data *d)
 {
 	void __iomem *reg;
 	u32 val;
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 3daf1ed..b35e99c 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -52,7 +52,9 @@ void imx_cpu_die(unsigned int cpu)
 	 * the register being cleared to kill the cpu.
 	 */
 	imx_set_cpu_arg(cpu, ~0);
-	cpu_do_idle();
+
+	while (1)
+		cpu_do_idle();
 }
 
 int imx_cpu_kill(unsigned int cpu)
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index 53e43e5..bece8a6 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
@@ -34,17 +34,11 @@ static const char *imx51_dt_board_compat[] __initdata = {
 	NULL
 };
 
-static void __init imx51_timer_init(void)
-{
-	mx51_clocks_init_dt();
-}
-
 DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
 	.map_io		= mx51_map_io,
 	.init_early	= imx51_init_early,
 	.init_irq	= mx51_init_irq,
 	.handle_irq	= imx51_handle_irq,
-	.init_time	= imx51_timer_init,
 	.init_machine	= imx51_dt_init,
 	.init_late	= imx51_init_late,
 	.dt_compat	= imx51_dt_board_compat,
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index 368a6e3..58b864a 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -404,8 +404,7 @@ static int armadillo5x0_sdhc1_init(struct device *dev,
 
 	/* When supported the trigger type have to be BOTH */
 	ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)),
-			  detect_irq,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  detect_irq, IRQF_TRIGGER_FALLING,
 			  "sdhc-detect", data);
 
 	if (ret)
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 29ac8ee6..97f9c62 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -26,7 +26,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c
index 98c5894..c9c4d8d 100644
--- a/arch/arm/mach-imx/mach-imx53.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -36,17 +36,11 @@ static const char *imx53_dt_board_compat[] __initdata = {
 	NULL
 };
 
-static void __init imx53_timer_init(void)
-{
-	mx53_clocks_init_dt();
-}
-
 DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
 	.map_io		= mx53_map_io,
 	.init_early	= imx53_init_early,
 	.init_irq	= mx53_init_irq,
 	.handle_irq	= imx53_handle_irq,
-	.init_time	= imx53_timer_init,
 	.init_machine	= imx53_dt_init,
 	.init_late	= imx53_init_late,
 	.dt_compat	= imx53_dt_board_compat,
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 7be13f8..0f9f241 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -11,11 +11,8 @@
  */
 
 #include <linux/clk.h>
-#include <linux/clk-provider.h>
 #include <linux/clkdev.h>
-#include <linux/clocksource.h>
 #include <linux/cpu.h>
-#include <linux/delay.h>
 #include <linux/export.h>
 #include <linux/init.h>
 #include <linux/io.h>
@@ -31,7 +28,7 @@
 #include <linux/regmap.h>
 #include <linux/micrel_phy.h>
 #include <linux/mfd/syscon.h>
-#include <asm/hardware/cache-l2x0.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/system_misc.h>
@@ -40,150 +37,82 @@
 #include "cpuidle.h"
 #include "hardware.h"
 
-static u32 chip_revision;
-
-int imx6q_revision(void)
-{
-	return chip_revision;
-}
-
-static void __init imx6q_init_revision(void)
-{
-	u32 rev = imx_anatop_get_digprog();
-
-	switch (rev & 0xff) {
-	case 0:
-		chip_revision = IMX_CHIP_REVISION_1_0;
-		break;
-	case 1:
-		chip_revision = IMX_CHIP_REVISION_1_1;
-		break;
-	case 2:
-		chip_revision = IMX_CHIP_REVISION_1_2;
-		break;
-	default:
-		chip_revision = IMX_CHIP_REVISION_UNKNOWN;
-	}
-
-	mxc_set_cpu_type(rev >> 16 & 0xff);
-}
-
-static void imx6q_restart(enum reboot_mode mode, const char *cmd)
-{
-	struct device_node *np;
-	void __iomem *wdog_base;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-wdt");
-	wdog_base = of_iomap(np, 0);
-	if (!wdog_base)
-		goto soft;
-
-	imx_src_prepare_restart();
-
-	/* enable wdog */
-	writew_relaxed(1 << 2, wdog_base);
-	/* write twice to ensure the request will not get ignored */
-	writew_relaxed(1 << 2, wdog_base);
-
-	/* wait for reset to assert ... */
-	mdelay(500);
-
-	pr_err("Watchdog reset failed to assert reset\n");
-
-	/* delay to allow the serial port to show the message */
-	mdelay(50);
-
-soft:
-	/* we'll take a jump through zero as a poor second */
-	soft_restart(0);
-}
-
 /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
 static int ksz9021rn_phy_fixup(struct phy_device *phydev)
 {
 	if (IS_BUILTIN(CONFIG_PHYLIB)) {
 		/* min rx data delay */
-		phy_write(phydev, 0x0b, 0x8105);
-		phy_write(phydev, 0x0c, 0x0000);
+		phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
+			0x8000 | MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW);
+		phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0x0000);
 
 		/* max rx/tx clock delay, min rx/tx control delay */
-		phy_write(phydev, 0x0b, 0x8104);
-		phy_write(phydev, 0x0c, 0xf0f0);
-		phy_write(phydev, 0x0b, 0x104);
+		phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
+			0x8000 | MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW);
+		phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0xf0f0);
+		phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
+			MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW);
 	}
 
 	return 0;
 }
 
-static void __init imx6q_sabrelite_cko1_setup(void)
+static void mmd_write_reg(struct phy_device *dev, int device, int reg, int val)
 {
-	struct clk *cko1_sel, *ahb, *cko1;
-	unsigned long rate;
-
-	cko1_sel = clk_get_sys(NULL, "cko1_sel");
-	ahb = clk_get_sys(NULL, "ahb");
-	cko1 = clk_get_sys(NULL, "cko1");
-	if (IS_ERR(cko1_sel) || IS_ERR(ahb) || IS_ERR(cko1)) {
-		pr_err("cko1 setup failed!\n");
-		goto put_clk;
-	}
-	clk_set_parent(cko1_sel, ahb);
-	rate = clk_round_rate(cko1, 16000000);
-	clk_set_rate(cko1, rate);
-put_clk:
-	if (!IS_ERR(cko1_sel))
-		clk_put(cko1_sel);
-	if (!IS_ERR(ahb))
-		clk_put(ahb);
-	if (!IS_ERR(cko1))
-		clk_put(cko1);
+	phy_write(dev, 0x0d, device);
+	phy_write(dev, 0x0e, reg);
+	phy_write(dev, 0x0d, (1 << 14) | device);
+	phy_write(dev, 0x0e, val);
 }
 
-static void __init imx6q_sabrelite_init(void)
+static int ksz9031rn_phy_fixup(struct phy_device *dev)
 {
-	if (IS_BUILTIN(CONFIG_PHYLIB))
-		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
-				ksz9021rn_phy_fixup);
-	imx6q_sabrelite_cko1_setup();
+	/*
+	 * min rx data delay, max rx/tx clock delay,
+	 * min rx/tx control delay
+	 */
+	mmd_write_reg(dev, 2, 4, 0);
+	mmd_write_reg(dev, 2, 5, 0);
+	mmd_write_reg(dev, 2, 8, 0x003ff);
+
+	return 0;
 }
 
-static void __init imx6q_sabresd_cko1_setup(void)
+static int ar8031_phy_fixup(struct phy_device *dev)
 {
-	struct clk *cko1_sel, *pll4, *pll4_post, *cko1;
-	unsigned long rate;
-
-	cko1_sel = clk_get_sys(NULL, "cko1_sel");
-	pll4 = clk_get_sys(NULL, "pll4_audio");
-	pll4_post = clk_get_sys(NULL, "pll4_post_div");
-	cko1 = clk_get_sys(NULL, "cko1");
-	if (IS_ERR(cko1_sel) || IS_ERR(pll4)
-			|| IS_ERR(pll4_post) || IS_ERR(cko1)) {
-		pr_err("cko1 setup failed!\n");
-		goto put_clk;
-	}
-	/*
-	 * Setting pll4 at 768MHz (24MHz * 32)
-	 * So its child clock can get 24MHz easily
-	 */
-	clk_set_rate(pll4, 768000000);
-
-	clk_set_parent(cko1_sel, pll4_post);
-	rate = clk_round_rate(cko1, 24000000);
-	clk_set_rate(cko1, rate);
-put_clk:
-	if (!IS_ERR(cko1_sel))
-		clk_put(cko1_sel);
-	if (!IS_ERR(pll4_post))
-		clk_put(pll4_post);
-	if (!IS_ERR(pll4))
-		clk_put(pll4);
-	if (!IS_ERR(cko1))
-		clk_put(cko1);
+	u16 val;
+
+	/* To enable AR8031 output a 125MHz clk from CLK_25M */
+	phy_write(dev, 0xd, 0x7);
+	phy_write(dev, 0xe, 0x8016);
+	phy_write(dev, 0xd, 0x4007);
+
+	val = phy_read(dev, 0xe);
+	val &= 0xffe3;
+	val |= 0x18;
+	phy_write(dev, 0xe, val);
+
+	/* introduce tx clock delay */
+	phy_write(dev, 0x1d, 0x5);
+	val = phy_read(dev, 0x1e);
+	val |= 0x0100;
+	phy_write(dev, 0x1e, val);
+
+	return 0;
 }
 
-static void __init imx6q_sabresd_init(void)
+#define PHY_ID_AR8031	0x004dd074
+
+static void __init imx6q_enet_phy_init(void)
 {
-	imx6q_sabresd_cko1_setup();
+	if (IS_BUILTIN(CONFIG_PHYLIB)) {
+		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
+				ksz9021rn_phy_fixup);
+		phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK,
+				ksz9031rn_phy_fixup);
+		phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff,
+				ar8031_phy_fixup);
+	}
 }
 
 static void __init imx6q_1588_init(void)
@@ -192,29 +121,33 @@ static void __init imx6q_1588_init(void)
 
 	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
 	if (!IS_ERR(gpr))
-		regmap_update_bits(gpr, 0x4, 1 << 21, 1 << 21);
+		regmap_update_bits(gpr, IOMUXC_GPR1,
+				IMX6Q_GPR1_ENET_CLK_SEL_MASK,
+				IMX6Q_GPR1_ENET_CLK_SEL_ANATOP);
 	else
 		pr_err("failed to find fsl,imx6q-iomux-gpr regmap\n");
 
 }
-static void __init imx6q_usb_init(void)
-{
-	imx_anatop_usb_chrg_detect_disable();
-}
 
 static void __init imx6q_init_machine(void)
 {
-	if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
-		imx6q_sabrelite_init();
-	else if (of_machine_is_compatible("fsl,imx6q-sabresd") ||
-			of_machine_is_compatible("fsl,imx6dl-sabresd"))
-		imx6q_sabresd_init();
+	struct device *parent;
+
+	imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
+			      imx_get_soc_revision());
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	mxc_arch_reset_init_dt();
+
+	parent = imx_soc_device_init();
+	if (parent == NULL)
+		pr_warn("failed to initialize soc device\n");
+
+	imx6q_enet_phy_init();
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
 
 	imx_anatop_init();
 	imx6q_pm_init();
-	imx6q_usb_init();
 	imx6q_1588_init();
 }
 
@@ -250,17 +183,21 @@ put_node:
 	of_node_put(np);
 }
 
-static void __init imx6q_opp_init(struct device *cpu_dev)
+static void __init imx6q_opp_init(void)
 {
 	struct device_node *np;
+	struct device *cpu_dev = get_cpu_device(0);
 
-	np = of_find_node_by_path("/cpus/cpu@0");
+	if (!cpu_dev) {
+		pr_warn("failed to get cpu0 device\n");
+		return;
+	}
+	np = of_node_get(cpu_dev->of_node);
 	if (!np) {
 		pr_warn("failed to find cpu0 node\n");
 		return;
 	}
 
-	cpu_dev->of_node = np;
 	if (of_init_opp_table(cpu_dev)) {
 		pr_warn("failed to init OPP table\n");
 		goto put_node;
@@ -282,11 +219,11 @@ static void __init imx6q_init_late(void)
 	 * WAIT mode is broken on TO 1.0 and 1.1, so there is no point
 	 * to run cpuidle on them.
 	 */
-	if (imx6q_revision() > IMX_CHIP_REVISION_1_1)
+	if (imx_get_soc_revision() > IMX_CHIP_REVISION_1_1)
 		imx6q_cpuidle_init();
 
 	if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) {
-		imx6q_opp_init(&imx6q_cpufreq_pdev.dev);
+		imx6q_opp_init();
 		platform_device_register(&imx6q_cpufreq_pdev);
 	}
 }
@@ -297,57 +234,15 @@ static void __init imx6q_map_io(void)
 	imx_scu_map_io();
 }
 
-#ifdef CONFIG_CACHE_L2X0
-static void __init imx6q_init_l2cache(void)
-{
-	void __iomem *l2x0_base;
-	struct device_node *np;
-	unsigned int val;
-
-	np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
-	if (!np)
-		goto out;
-
-	l2x0_base = of_iomap(np, 0);
-	if (!l2x0_base) {
-		of_node_put(np);
-		goto out;
-	}
-
-	/* Configure the L2 PREFETCH and POWER registers */
-	val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL);
-	val |= 0x70800000;
-	writel_relaxed(val, l2x0_base + L2X0_PREFETCH_CTRL);
-	val = L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN;
-	writel_relaxed(val, l2x0_base + L2X0_POWER_CTRL);
-
-	iounmap(l2x0_base);
-	of_node_put(np);
-
-out:
-	l2x0_of_init(0, ~0UL);
-}
-#else
-static inline void imx6q_init_l2cache(void) {}
-#endif
-
 static void __init imx6q_init_irq(void)
 {
-	imx6q_init_revision();
-	imx6q_init_l2cache();
+	imx_init_revision_from_anatop();
+	imx_init_l2cache();
 	imx_src_init();
 	imx_gpc_init();
 	irqchip_init();
 }
 
-static void __init imx6q_timer_init(void)
-{
-	of_clk_init(NULL);
-	clocksource_of_init();
-	imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
-			      imx6q_revision());
-}
-
 static const char *imx6q_dt_compat[] __initdata = {
 	"fsl,imx6dl",
 	"fsl,imx6q",
@@ -358,9 +253,8 @@ DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)")
 	.smp		= smp_ops(imx_smp_ops),
 	.map_io		= imx6q_map_io,
 	.init_irq	= imx6q_init_irq,
-	.init_time	= imx6q_timer_init,
 	.init_machine	= imx6q_init_machine,
 	.init_late      = imx6q_init_late,
 	.dt_compat	= imx6q_dt_compat,
-	.restart	= imx6q_restart,
+	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c
index 132db26..2f952e3 100644
--- a/arch/arm/mach-imx/mach-imx6sl.c
+++ b/arch/arm/mach-imx/mach-imx6sl.c
@@ -7,36 +7,60 @@
  *
  */
 
-#include <linux/clk-provider.h>
 #include <linux/irqchip.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <asm/hardware/cache-l2x0.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
+#include <linux/regmap.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include "common.h"
 
+static void __init imx6sl_fec_init(void)
+{
+	struct regmap *gpr;
+
+	/* set FEC clock from internal PLL clock source */
+	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6sl-iomuxc-gpr");
+	if (!IS_ERR(gpr)) {
+		regmap_update_bits(gpr, IOMUXC_GPR1,
+			IMX6SL_GPR1_FEC_CLOCK_MUX2_SEL_MASK, 0);
+		regmap_update_bits(gpr, IOMUXC_GPR1,
+			IMX6SL_GPR1_FEC_CLOCK_MUX1_SEL_MASK, 0);
+	} else {
+		pr_err("failed to find fsl,imx6sl-iomux-gpr regmap\n");
+	}
+}
+
 static void __init imx6sl_init_machine(void)
 {
+	struct device *parent;
+
 	mxc_arch_reset_init_dt();
 
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	parent = imx_soc_device_init();
+	if (parent == NULL)
+		pr_warn("failed to initialize soc device\n");
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
+
+	imx6sl_fec_init();
+	imx_anatop_init();
+	/* Reuse imx6q pm code */
+	imx6q_pm_init();
 }
 
 static void __init imx6sl_init_irq(void)
 {
-	l2x0_of_init(0, ~0UL);
+	imx_init_revision_from_anatop();
+	imx_init_l2cache();
 	imx_src_init();
 	imx_gpc_init();
 	irqchip_init();
 }
 
-static void __init imx6sl_timer_init(void)
-{
-	of_clk_init(NULL);
-}
-
 static const char *imx6sl_dt_compat[] __initdata = {
 	"fsl,imx6sl",
 	NULL,
@@ -45,7 +69,6 @@ static const char *imx6sl_dt_compat[] __initdata = {
 DT_MACHINE_START(IMX6SL, "Freescale i.MX6 SoloLite (Device Tree)")
 	.map_io		= debug_ll_io_init,
 	.init_irq	= imx6sl_init_irq,
-	.init_time	= imx6sl_timer_init,
 	.init_machine	= imx6sl_init_machine,
 	.dt_compat	= imx6sl_dt_compat,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 1ed9161..50044a2 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -311,7 +311,7 @@ static int mx31_3ds_sdhc1_init(struct device *dev,
 	}
 
 	ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)),
-			  detect_irq, IRQF_DISABLED |
+			  detect_irq,
 			  IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
 			  "sdhc1-detect", data);
 	if (ret) {
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index a27faab..c918940 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -26,7 +26,7 @@
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
 #include <linux/gpio.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 
 #include "common.h"
 #include "devices-imx27.h"
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index bc0261e..45303bd6 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -371,8 +371,7 @@ static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
 #endif
 
 	ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), detect_irq,
-			IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-				"sdhc-detect", data);
+			IRQF_TRIGGER_FALLING, "sdhc-detect", data);
 	if (ret)
 		goto err_gpio_free_2;
 
diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c
index 816991d..af0cb8a 100644
--- a/arch/arm/mach-imx/mach-vf610.c
+++ b/arch/arm/mach-imx/mach-vf610.c
@@ -8,9 +8,7 @@
  */
 
 #include <linux/of_platform.h>
-#include <linux/clocksource.h>
 #include <linux/irqchip.h>
-#include <linux/clk-provider.h>
 #include <asm/mach/arch.h>
 #include <asm/hardware/cache-l2x0.h>
 
@@ -28,12 +26,6 @@ static void __init vf610_init_irq(void)
 	irqchip_init();
 }
 
-static void __init vf610_init_time(void)
-{
-	of_clk_init(NULL);
-	clocksource_of_init();
-}
-
 static const char *vf610_dt_compat[] __initdata = {
 	"fsl,vf610",
 	NULL,
@@ -41,7 +33,6 @@ static const char *vf610_dt_compat[] __initdata = {
 
 DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF610 (Device Tree)")
 	.init_irq	= vf610_init_irq,
-	.init_time	= vf610_init_time,
 	.init_machine   = vf610_init_machine,
 	.dt_compat	= vf610_dt_compat,
 	.restart	= mxc_restart,
diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c
index e065c11..5211f62 100644
--- a/arch/arm/mach-imx/mm-imx25.c
+++ b/arch/arm/mach-imx/mm-imx25.c
@@ -61,25 +61,8 @@ void __init mx25_init_irq(void)
 	mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR));
 }
 
-static struct sdma_script_start_addrs imx25_sdma_script __initdata = {
-	.ap_2_ap_addr = 729,
-	.uart_2_mcu_addr = 904,
-	.per_2_app_addr = 1255,
-	.mcu_2_app_addr = 834,
-	.uartsh_2_mcu_addr = 1120,
-	.per_2_shp_addr = 1329,
-	.mcu_2_shp_addr = 1048,
-	.ata_2_mcu_addr = 1560,
-	.mcu_2_ata_addr = 1479,
-	.app_2_per_addr = 1189,
-	.app_2_mcu_addr = 770,
-	.shp_2_per_addr = 1407,
-	.shp_2_mcu_addr = 979,
-};
-
 static struct sdma_platform_data imx25_sdma_pdata __initdata = {
 	.fw_name = "sdma-imx25.bin",
-	.script_addrs = &imx25_sdma_script,
 };
 
 static const struct resource imx25_audmux_res[] __initconst = {
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index cf193d8..d1d5260 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/of_address.h>
 
 #include <asm/mach/map.h>
 
@@ -88,8 +89,15 @@ void __init imx51_init_early(void)
 
 void __init imx53_init_early(void)
 {
+	struct device_node *np;
+	void __iomem *base;
+
 	mxc_set_cpu_type(MXC_CPU_MX53);
-	mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR));
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx53-iomuxc");
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+	mxc_iomux_v3_init(base);
 	imx_src_init();
 }
 
@@ -100,25 +108,18 @@ void __init mx51_init_irq(void)
 
 void __init mx53_init_irq(void)
 {
-	tzic_init_irq(MX53_IO_ADDRESS(MX53_TZIC_BASE_ADDR));
-}
+	struct device_node *np;
+	void __iomem *base;
 
-static struct sdma_script_start_addrs imx51_sdma_script __initdata = {
-	.ap_2_ap_addr = 642,
-	.uart_2_mcu_addr = 817,
-	.mcu_2_app_addr = 747,
-	.mcu_2_shp_addr = 961,
-	.ata_2_mcu_addr = 1473,
-	.mcu_2_ata_addr = 1392,
-	.app_2_per_addr = 1033,
-	.app_2_mcu_addr = 683,
-	.shp_2_per_addr = 1251,
-	.shp_2_mcu_addr = 892,
-};
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx53-tzic");
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+
+	tzic_init_irq(base);
+}
 
 static struct sdma_platform_data imx51_sdma_pdata __initdata = {
 	.fw_name = "sdma-imx51.bin",
-	.script_addrs = &imx51_sdma_script,
 };
 
 static const struct resource imx51_audmux_res[] __initconst = {
@@ -153,10 +154,10 @@ void __init imx51_soc_init(void)
 void __init imx51_init_late(void)
 {
 	mx51_neon_fixup();
-	imx51_pm_init();
+	imx5_pm_init();
 }
 
 void __init imx53_init_late(void)
 {
-	imx53_pm_init();
+	imx5_pm_init();
 }
diff --git a/arch/arm/mach-imx/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c
index d4361b8..649fe49 100644
--- a/arch/arm/mach-imx/mx31lilly-db.c
+++ b/arch/arm/mach-imx/mx31lilly-db.c
@@ -130,8 +130,7 @@ static int mxc_mmc1_init(struct device *dev,
 	gpio_direction_input(gpio_wp);
 
 	ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)),
-			  detect_irq,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  detect_irq, IRQF_TRIGGER_FALLING,
 			  "MMC detect", data);
 	if (ret)
 		goto exit_free_wp;
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index 8629e5b..b08ab3a 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -34,6 +34,7 @@
 #define MXC_CPU_MX35		35
 #define MXC_CPU_MX51		51
 #define MXC_CPU_MX53		53
+#define MXC_CPU_IMX6SL		0x60
 #define MXC_CPU_IMX6DL		0x61
 #define MXC_CPU_IMX6Q		0x63
 
@@ -152,6 +153,11 @@ extern unsigned int __mxc_cpu_type;
 #endif
 
 #ifndef __ASSEMBLY__
+static inline bool cpu_is_imx6sl(void)
+{
+	return __mxc_cpu_type == MXC_CPU_IMX6SL;
+}
+
 static inline bool cpu_is_imx6dl(void)
 {
 	return __mxc_cpu_type == MXC_CPU_IMX6DL;
diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c
index 82e79c6..58aeaf5 100644
--- a/arch/arm/mach-imx/pm-imx5.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -169,14 +169,9 @@ static int __init imx5_pm_common_init(void)
 	return imx5_cpuidle_init();
 }
 
-void __init imx51_pm_init(void)
+void __init imx5_pm_init(void)
 {
 	int ret = imx5_pm_common_init();
 	if (!ret)
 		suspend_set_ops(&mx5_suspend_ops);
 }
-
-void __init imx53_pm_init(void)
-{
-	imx5_pm_common_init();
-}
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
index 2049427..aecd9f8 100644
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -10,9 +10,15 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
 #include <linux/suspend.h>
 #include <asm/cacheflush.h>
 #include <asm/proc-fns.h>
@@ -22,6 +28,147 @@
 #include "common.h"
 #include "hardware.h"
 
+#define CCR				0x0
+#define BM_CCR_WB_COUNT			(0x7 << 16)
+#define BM_CCR_RBC_BYPASS_COUNT		(0x3f << 21)
+#define BM_CCR_RBC_EN			(0x1 << 27)
+
+#define CLPCR				0x54
+#define BP_CLPCR_LPM			0
+#define BM_CLPCR_LPM			(0x3 << 0)
+#define BM_CLPCR_BYPASS_PMIC_READY	(0x1 << 2)
+#define BM_CLPCR_ARM_CLK_DIS_ON_LPM	(0x1 << 5)
+#define BM_CLPCR_SBYOS			(0x1 << 6)
+#define BM_CLPCR_DIS_REF_OSC		(0x1 << 7)
+#define BM_CLPCR_VSTBY			(0x1 << 8)
+#define BP_CLPCR_STBY_COUNT		9
+#define BM_CLPCR_STBY_COUNT		(0x3 << 9)
+#define BM_CLPCR_COSC_PWRDOWN		(0x1 << 11)
+#define BM_CLPCR_WB_PER_AT_LPM		(0x1 << 16)
+#define BM_CLPCR_WB_CORE_AT_LPM		(0x1 << 17)
+#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS	(0x1 << 19)
+#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS	(0x1 << 21)
+#define BM_CLPCR_MASK_CORE0_WFI		(0x1 << 22)
+#define BM_CLPCR_MASK_CORE1_WFI		(0x1 << 23)
+#define BM_CLPCR_MASK_CORE2_WFI		(0x1 << 24)
+#define BM_CLPCR_MASK_CORE3_WFI		(0x1 << 25)
+#define BM_CLPCR_MASK_SCU_IDLE		(0x1 << 26)
+#define BM_CLPCR_MASK_L2CC_IDLE		(0x1 << 27)
+
+#define CGPR				0x64
+#define BM_CGPR_CHICKEN_BIT		(0x1 << 17)
+
+static void __iomem *ccm_base;
+
+void imx6q_set_chicken_bit(void)
+{
+	u32 val = readl_relaxed(ccm_base + CGPR);
+
+	val |= BM_CGPR_CHICKEN_BIT;
+	writel_relaxed(val, ccm_base + CGPR);
+}
+
+static void imx6q_enable_rbc(bool enable)
+{
+	u32 val;
+
+	/*
+	 * need to mask all interrupts in GPC before
+	 * operating RBC configurations
+	 */
+	imx_gpc_mask_all();
+
+	/* configure RBC enable bit */
+	val = readl_relaxed(ccm_base + CCR);
+	val &= ~BM_CCR_RBC_EN;
+	val |= enable ? BM_CCR_RBC_EN : 0;
+	writel_relaxed(val, ccm_base + CCR);
+
+	/* configure RBC count */
+	val = readl_relaxed(ccm_base + CCR);
+	val &= ~BM_CCR_RBC_BYPASS_COUNT;
+	val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0;
+	writel(val, ccm_base + CCR);
+
+	/*
+	 * need to delay at least 2 cycles of CKIL(32K)
+	 * due to hardware design requirement, which is
+	 * ~61us, here we use 65us for safe
+	 */
+	udelay(65);
+
+	/* restore GPC interrupt mask settings */
+	imx_gpc_restore_all();
+}
+
+static void imx6q_enable_wb(bool enable)
+{
+	u32 val;
+
+	/* configure well bias enable bit */
+	val = readl_relaxed(ccm_base + CLPCR);
+	val &= ~BM_CLPCR_WB_PER_AT_LPM;
+	val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0;
+	writel_relaxed(val, ccm_base + CLPCR);
+
+	/* configure well bias count */
+	val = readl_relaxed(ccm_base + CCR);
+	val &= ~BM_CCR_WB_COUNT;
+	val |= enable ? BM_CCR_WB_COUNT : 0;
+	writel_relaxed(val, ccm_base + CCR);
+}
+
+int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
+{
+	struct irq_desc *iomuxc_irq_desc;
+	u32 val = readl_relaxed(ccm_base + CLPCR);
+
+	val &= ~BM_CLPCR_LPM;
+	switch (mode) {
+	case WAIT_CLOCKED:
+		break;
+	case WAIT_UNCLOCKED:
+		val |= 0x1 << BP_CLPCR_LPM;
+		val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM;
+		break;
+	case STOP_POWER_ON:
+		val |= 0x2 << BP_CLPCR_LPM;
+		break;
+	case WAIT_UNCLOCKED_POWER_OFF:
+		val |= 0x1 << BP_CLPCR_LPM;
+		val &= ~BM_CLPCR_VSTBY;
+		val &= ~BM_CLPCR_SBYOS;
+		break;
+	case STOP_POWER_OFF:
+		val |= 0x2 << BP_CLPCR_LPM;
+		val |= 0x3 << BP_CLPCR_STBY_COUNT;
+		val |= BM_CLPCR_VSTBY;
+		val |= BM_CLPCR_SBYOS;
+		if (cpu_is_imx6sl()) {
+			val |= BM_CLPCR_BYPASS_PMIC_READY;
+			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
+		} else {
+			val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * Unmask the always pending IOMUXC interrupt #32 as wakeup source to
+	 * deassert dsm_request signal, so that we can ensure dsm_request
+	 * is not asserted when we're going to write CLPCR register to set LPM.
+	 * After setting up LPM bits, we need to mask this wakeup source.
+	 */
+	iomuxc_irq_desc = irq_to_desc(32);
+	imx_gpc_irq_unmask(&iomuxc_irq_desc->irq_data);
+	writel_relaxed(val, ccm_base + CLPCR);
+	imx_gpc_irq_mask(&iomuxc_irq_desc->irq_data);
+
+	return 0;
+}
+
 static int imx6q_suspend_finish(unsigned long val)
 {
 	cpu_do_idle();
@@ -33,14 +180,19 @@ static int imx6q_pm_enter(suspend_state_t state)
 	switch (state) {
 	case PM_SUSPEND_MEM:
 		imx6q_set_lpm(STOP_POWER_OFF);
+		imx6q_enable_wb(true);
+		imx6q_enable_rbc(true);
 		imx_gpc_pre_suspend();
 		imx_anatop_pre_suspend();
 		imx_set_cpu_jump(0, v7_cpu_resume);
 		/* Zzz ... */
 		cpu_suspend(0, imx6q_suspend_finish);
-		imx_smp_prepare();
+		if (cpu_is_imx6q() || cpu_is_imx6dl())
+			imx_smp_prepare();
 		imx_anatop_post_resume();
 		imx_gpc_post_resume();
+		imx6q_enable_rbc(false);
+		imx6q_enable_wb(false);
 		imx6q_set_lpm(WAIT_CLOCKED);
 		break;
 	default:
@@ -55,7 +207,29 @@ static const struct platform_suspend_ops imx6q_pm_ops = {
 	.valid = suspend_valid_only_mem,
 };
 
+void __init imx6q_pm_set_ccm_base(void __iomem *base)
+{
+	ccm_base = base;
+}
+
 void __init imx6q_pm_init(void)
 {
+	struct regmap *gpr;
+
+	WARN_ON(!ccm_base);
+
+	/*
+	 * Force IOMUXC irq pending, so that the interrupt to GPC can be
+	 * used to deassert dsm_request signal when the signal gets
+	 * asserted unexpectedly.
+	 */
+	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+	if (!IS_ERR(gpr))
+		regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT,
+				   IMX6Q_GPR1_GINT);
+
+	/* Set initial power mode */
+	imx6q_set_lpm(WAIT_CLOCKED);
+
 	suspend_set_ops(&imx6q_pm_ops);
 }
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
index 10a6b1a..4754373 100644
--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -91,6 +91,7 @@ void imx_enable_cpu(int cpu, bool enable)
 	spin_lock(&scr_lock);
 	val = readl_relaxed(src_base + SRC_SCR);
 	val = enable ? val | mask : val & ~mask;
+	val |= 1 << (BP_SRC_SCR_CORE1_RST + cpu - 1);
 	writel_relaxed(val, src_base + SRC_SCR);
 	spin_unlock(&scr_lock);
 }
diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c
index 6fe81bb..e6edcd3 100644
--- a/arch/arm/mach-imx/system.c
+++ b/arch/arm/mach-imx/system.c
@@ -27,6 +27,7 @@
 #include <asm/system_misc.h>
 #include <asm/proc-fns.h>
 #include <asm/mach-types.h>
+#include <asm/hardware/cache-l2x0.h>
 
 #include "common.h"
 #include "hardware.h"
@@ -41,6 +42,9 @@ void mxc_restart(enum reboot_mode mode, const char *cmd)
 {
 	unsigned int wcr_enable;
 
+	if (cpu_is_imx6q() || cpu_is_imx6dl())
+		imx_src_prepare_restart();
+
 	if (wdog_clk)
 		clk_enable(wdog_clk);
 
@@ -51,6 +55,8 @@ void mxc_restart(enum reboot_mode mode, const char *cmd)
 
 	/* Assert SRS signal */
 	__raw_writew(wcr_enable, wdog_base);
+	/* write twice to ensure the request will not get ignored */
+	__raw_writew(wcr_enable, wdog_base);
 
 	/* wait for reset to assert... */
 	mdelay(500);
@@ -95,3 +101,46 @@ void __init mxc_arch_reset_init_dt(void)
 
 	clk_prepare(wdog_clk);
 }
+
+#ifdef CONFIG_CACHE_L2X0
+void __init imx_init_l2cache(void)
+{
+	void __iomem *l2x0_base;
+	struct device_node *np;
+	unsigned int val;
+
+	np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
+	if (!np)
+		goto out;
+
+	l2x0_base = of_iomap(np, 0);
+	if (!l2x0_base) {
+		of_node_put(np);
+		goto out;
+	}
+
+	/* Configure the L2 PREFETCH and POWER registers */
+	val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL);
+	val |= 0x70800000;
+	/*
+	 * The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0
+	 * The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2
+	 * But according to ARM PL310 errata: 752271
+	 * ID: 752271: Double linefill feature can cause data corruption
+	 * Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2
+	 * Workaround: The only workaround to this erratum is to disable the
+	 * double linefill feature. This is the default behavior.
+	 */
+	if (cpu_is_imx6q())
+		val &= ~(1 << 30 | 1 << 23);
+	writel_relaxed(val, l2x0_base + L2X0_PREFETCH_CTRL);
+	val = L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN;
+	writel_relaxed(val, l2x0_base + L2X0_POWER_CTRL);
+
+	iounmap(l2x0_base);
+	of_node_put(np);
+
+out:
+	l2x0_of_init(0, ~0UL);
+}
+#endif
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index cd46529..9b6638a 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -250,7 +250,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction mxc_timer_irq = {
 	.name		= "i.MX Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= mxc_timer_interrupt,
 };
 
diff --git a/arch/arm/mach-integrator/include/mach/cm.h b/arch/arm/mach-integrator/cm.h
index 202e6a5..4ecff7b 100644
--- a/arch/arm/mach-integrator/include/mach/cm.h
+++ b/arch/arm/mach-integrator/cm.h
@@ -1,9 +1,12 @@
 /*
- * update the core module control register.
+ * access the core module control register.
  */
+u32 cm_get(void);
 void cm_control(u32, u32);
 
-#define CM_CTRL	__io_address(INTEGRATOR_HDR_CTRL)
+struct device_node;
+void cm_init(void);
+void cm_clear_irqs(void);
 
 #define CM_CTRL_LED			(1 << 0)
 #define CM_CTRL_nMBDET			(1 << 1)
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 4cdfd73..00ddf20 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -22,77 +22,30 @@
 #include <linux/amba/serial.h>
 #include <linux/io.h>
 #include <linux/stat.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
-#include <mach/cm.h>
-#include <mach/irqs.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/time.h>
 #include <asm/pgtable.h>
 
+#include "cm.h"
 #include "common.h"
 
-#ifdef CONFIG_ATAGS
-
-#define INTEGRATOR_RTC_IRQ	{ IRQ_RTCINT }
-#define INTEGRATOR_UART0_IRQ	{ IRQ_UARTINT0 }
-#define INTEGRATOR_UART1_IRQ	{ IRQ_UARTINT1 }
-#define KMI0_IRQ		{ IRQ_KMIINT0 }
-#define KMI1_IRQ		{ IRQ_KMIINT1 }
-
-static AMBA_APB_DEVICE(rtc, "rtc", 0,
-	INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL);
-
-static AMBA_APB_DEVICE(uart0, "uart0", 0,
-	INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, NULL);
-
-static AMBA_APB_DEVICE(uart1, "uart1", 0,
-	INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, NULL);
-
-static AMBA_APB_DEVICE(kmi0, "kmi0", 0, KMI0_BASE, KMI0_IRQ, NULL);
-static AMBA_APB_DEVICE(kmi1, "kmi1", 0, KMI1_BASE, KMI1_IRQ, NULL);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&rtc_device,
-	&uart0_device,
-	&uart1_device,
-	&kmi0_device,
-	&kmi1_device,
-};
+static DEFINE_RAW_SPINLOCK(cm_lock);
+static void __iomem *cm_base;
 
-int __init integrator_init(bool is_cp)
+/**
+ * cm_get - get the value from the CM_CTRL register
+ */
+u32 cm_get(void)
 {
-	int i;
-
-	/*
-	 * The Integrator/AP lacks necessary AMBA PrimeCell IDs, so we need to
-	 * hard-code them. The Integator/CP and forward have proper cell IDs.
-	 * Else we leave them undefined to the bus driver can autoprobe them.
-	 */
-	if (!is_cp && IS_ENABLED(CONFIG_ARCH_INTEGRATOR_AP)) {
-		rtc_device.periphid	= 0x00041030;
-		uart0_device.periphid	= 0x00041010;
-		uart1_device.periphid	= 0x00041010;
-		kmi0_device.periphid	= 0x00041050;
-		kmi1_device.periphid	= 0x00041050;
-		uart0_device.dev.platform_data = &ap_uart_data;
-		uart1_device.dev.platform_data = &ap_uart_data;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-
-	return 0;
+	return readl(cm_base + INTEGRATOR_HDR_CTRL_OFFSET);
 }
 
-#endif
-
-static DEFINE_RAW_SPINLOCK(cm_lock);
-
 /**
  * cm_control - update the CM_CTRL register.
  * @mask: bits to change
@@ -104,12 +57,80 @@ void cm_control(u32 mask, u32 set)
 	u32 val;
 
 	raw_spin_lock_irqsave(&cm_lock, flags);
-	val = readl(CM_CTRL) & ~mask;
-	writel(val | set, CM_CTRL);
+	val = readl(cm_base + INTEGRATOR_HDR_CTRL_OFFSET) & ~mask;
+	writel(val | set, cm_base + INTEGRATOR_HDR_CTRL_OFFSET);
 	raw_spin_unlock_irqrestore(&cm_lock, flags);
 }
 
-EXPORT_SYMBOL(cm_control);
+static const char *integrator_arch_str(u32 id)
+{
+	switch ((id >> 16) & 0xff) {
+	case 0x00:
+		return "ASB little-endian";
+	case 0x01:
+		return "AHB little-endian";
+	case 0x03:
+		return "AHB-Lite system bus, bi-endian";
+	case 0x04:
+		return "AHB";
+	case 0x08:
+		return "AHB system bus, ASB processor bus";
+	default:
+		return "Unknown";
+	}
+}
+
+static const char *integrator_fpga_str(u32 id)
+{
+	switch ((id >> 12) & 0xf) {
+	case 0x01:
+		return "XC4062";
+	case 0x02:
+		return "XC4085";
+	case 0x03:
+		return "XVC600";
+	case 0x04:
+		return "EPM7256AE (Altera PLD)";
+	default:
+		return "Unknown";
+	}
+}
+
+void cm_clear_irqs(void)
+{
+	/* disable core module IRQs */
+	writel(0xffffffffU, cm_base + INTEGRATOR_HDR_IC_OFFSET +
+		IRQ_ENABLE_CLEAR);
+}
+
+static const struct of_device_id cm_match[] = {
+	{ .compatible = "arm,core-module-integrator"},
+	{ },
+};
+
+void cm_init(void)
+{
+	struct device_node *cm = of_find_matching_node(NULL, cm_match);
+	u32 val;
+
+	if (!cm) {
+		pr_crit("no core module node found in device tree\n");
+		return;
+	}
+	cm_base = of_iomap(cm, 0);
+	if (!cm_base) {
+		pr_crit("could not remap core module\n");
+		return;
+	}
+	cm_clear_irqs();
+	val = readl(cm_base + INTEGRATOR_HDR_ID_OFFSET);
+	pr_info("Detected ARM core module:\n");
+	pr_info("    Manufacturer: %02x\n", (val >> 24));
+	pr_info("    Architecture: %s\n", integrator_arch_str(val));
+	pr_info("    FPGA: %s\n", integrator_fpga_str(val));
+	pr_info("    Build: %02x\n", (val >> 4) & 0xFF);
+	pr_info("    Rev: %c\n", ('A' + (val & 0x03)));
+}
 
 /*
  * We need to stop things allocating the low memory; ideally we need a
@@ -145,27 +166,7 @@ static ssize_t intcp_get_arch(struct device *dev,
 			      struct device_attribute *attr,
 			      char *buf)
 {
-	const char *arch;
-
-	switch ((integrator_id >> 16) & 0xff) {
-	case 0x00:
-		arch = "ASB little-endian";
-		break;
-	case 0x01:
-		arch = "AHB little-endian";
-		break;
-	case 0x03:
-		arch = "AHB-Lite system bus, bi-endian";
-		break;
-	case 0x04:
-		arch = "AHB";
-		break;
-	default:
-		arch = "Unknown";
-		break;
-	}
-
-	return sprintf(buf, "%s\n", arch);
+	return sprintf(buf, "%s\n", integrator_arch_str(integrator_id));
 }
 
 static struct device_attribute intcp_arch_attr =
@@ -175,24 +176,7 @@ static ssize_t intcp_get_fpga(struct device *dev,
 			      struct device_attribute *attr,
 			      char *buf)
 {
-	const char *fpga;
-
-	switch ((integrator_id >> 12) & 0xf) {
-	case 0x01:
-		fpga = "XC4062";
-		break;
-	case 0x02:
-		fpga = "XC4085";
-		break;
-	case 0x04:
-		fpga = "EPM7256AE (Altera PLD)";
-		break;
-	default:
-		fpga = "Unknown";
-		break;
-	}
-
-	return sprintf(buf, "%s\n", fpga);
+	return sprintf(buf, "%s\n", integrator_fpga_str(integrator_id));
 }
 
 static struct device_attribute intcp_fpga_attr =
diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S
deleted file mode 100644
index 411b116..0000000
--- a/arch/arm/mach-integrator/include/mach/debug-macro.S
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/mach-integrator/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0x16000000	@ physical base address
-		mov	\rv, #0xf0000000	@ virtual base
-		add	\rv, \rv, #0x16000000 >> 4
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-integrator/include/mach/irqs.h b/arch/arm/mach-integrator/include/mach/irqs.h
deleted file mode 100644
index eff0ada..0000000
--- a/arch/arm/mach-integrator/include/mach/irqs.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- *  arch/arm/mach-integrator/include/mach/irqs.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * Interrupt numbers, all of the above are just static reservations
- * used so they can be encoded into device resources. They will finally
- * be done away with when switching to device tree.
- */
-#define IRQ_PIC_START			64
-#define IRQ_SOFTINT			(IRQ_PIC_START+0)
-#define IRQ_UARTINT0			(IRQ_PIC_START+1)
-#define IRQ_UARTINT1			(IRQ_PIC_START+2)
-#define IRQ_KMIINT0			(IRQ_PIC_START+3)
-#define IRQ_KMIINT1			(IRQ_PIC_START+4)
-#define IRQ_TIMERINT0			(IRQ_PIC_START+5)
-#define IRQ_TIMERINT1			(IRQ_PIC_START+6)
-#define IRQ_TIMERINT2			(IRQ_PIC_START+7)
-#define IRQ_RTCINT			(IRQ_PIC_START+8)
-#define IRQ_AP_EXPINT0			(IRQ_PIC_START+9)
-#define IRQ_AP_EXPINT1			(IRQ_PIC_START+10)
-#define IRQ_AP_EXPINT2			(IRQ_PIC_START+11)
-#define IRQ_AP_EXPINT3			(IRQ_PIC_START+12)
-#define IRQ_AP_PCIINT0			(IRQ_PIC_START+13)
-#define IRQ_AP_PCIINT1			(IRQ_PIC_START+14)
-#define IRQ_AP_PCIINT2			(IRQ_PIC_START+15)
-#define IRQ_AP_PCIINT3			(IRQ_PIC_START+16)
-#define IRQ_AP_V3INT			(IRQ_PIC_START+17)
-#define IRQ_AP_CPINT0			(IRQ_PIC_START+18)
-#define IRQ_AP_CPINT1			(IRQ_PIC_START+19)
-#define IRQ_AP_LBUSTIMEOUT 		(IRQ_PIC_START+20)
-#define IRQ_AP_APCINT			(IRQ_PIC_START+21)
-#define IRQ_CP_CLCDCINT			(IRQ_PIC_START+22)
-#define IRQ_CP_MMCIINT0			(IRQ_PIC_START+23)
-#define IRQ_CP_MMCIINT1			(IRQ_PIC_START+24)
-#define IRQ_CP_AACIINT			(IRQ_PIC_START+25)
-#define IRQ_CP_CPPLDINT			(IRQ_PIC_START+26)
-#define IRQ_CP_ETHINT			(IRQ_PIC_START+27)
-#define IRQ_CP_TSPENINT			(IRQ_PIC_START+28)
-#define IRQ_PIC_END			(IRQ_PIC_START+28)
-
-#define IRQ_CIC_START			(IRQ_PIC_END+1)
-#define IRQ_CM_SOFTINT			(IRQ_CIC_START+0)
-#define IRQ_CM_COMMRX			(IRQ_CIC_START+1)
-#define IRQ_CM_COMMTX			(IRQ_CIC_START+2)
-#define IRQ_CIC_END			(IRQ_CIC_START+2)
-
-/*
- * IntegratorCP only
- */
-#define IRQ_SIC_START			(IRQ_CIC_END+1)
-#define IRQ_SIC_CP_SOFTINT		(IRQ_SIC_START+0)
-#define IRQ_SIC_CP_RI0			(IRQ_SIC_START+1)
-#define IRQ_SIC_CP_RI1			(IRQ_SIC_START+2)
-#define IRQ_SIC_CP_CARDIN		(IRQ_SIC_START+3)
-#define IRQ_SIC_CP_LMINT0		(IRQ_SIC_START+4)
-#define IRQ_SIC_CP_LMINT1		(IRQ_SIC_START+5)
-#define IRQ_SIC_CP_LMINT2		(IRQ_SIC_START+6)
-#define IRQ_SIC_CP_LMINT3		(IRQ_SIC_START+7)
-#define IRQ_SIC_CP_LMINT4		(IRQ_SIC_START+8)
-#define IRQ_SIC_CP_LMINT5		(IRQ_SIC_START+9)
-#define IRQ_SIC_CP_LMINT6		(IRQ_SIC_START+10)
-#define IRQ_SIC_CP_LMINT7		(IRQ_SIC_START+11)
-#define IRQ_SIC_END			(IRQ_SIC_START+11)
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index d9e95e6..d50dc2d 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -51,13 +51,13 @@
 #include <asm/mach-types.h>
 
 #include <mach/lm.h>
-#include <mach/irqs.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
+#include "cm.h"
 #include "common.h"
 #include "pci_v3.h"
 
@@ -146,7 +146,7 @@ static int irq_suspend(void)
 static void irq_resume(void)
 {
 	/* disable all irq sources */
-	writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
+	cm_clear_irqs();
 	writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR);
 	writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
 
@@ -402,8 +402,6 @@ void __init ap_init_early(void)
 {
 }
 
-#ifdef CONFIG_OF
-
 static void __init ap_of_timer_init(void)
 {
 	struct device_node *node;
@@ -450,8 +448,7 @@ static const struct of_device_id fpga_irq_of_match[] __initconst = {
 
 static void __init ap_init_irq_of(void)
 {
-	/* disable core module IRQs */
-	writel(0xffffffffU, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
+	cm_init();
 	of_irq_init(fpga_irq_of_match);
 	integrator_clk_init(false);
 }
@@ -473,6 +470,11 @@ static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = {
 	{ /* sentinel */ },
 };
 
+static const struct of_device_id ap_syscon_match[] = {
+	{ .compatible = "arm,integrator-ap-syscon"},
+	{ },
+};
+
 static void __init ap_init_of(void)
 {
 	unsigned long sc_dec;
@@ -489,7 +491,8 @@ static void __init ap_init_of(void)
 	root = of_find_node_by_path("/");
 	if (!root)
 		return;
-	syscon = of_find_node_by_path("/syscon");
+
+	syscon = of_find_matching_node(root, ap_syscon_match);
 	if (!syscon)
 		return;
 
@@ -541,7 +544,7 @@ static void __init ap_init_of(void)
 		lmdev->resource.start = 0xc0000000 + 0x10000000 * i;
 		lmdev->resource.end = lmdev->resource.start + 0x0fffffff;
 		lmdev->resource.flags = IORESOURCE_MEM;
-		lmdev->irq = IRQ_AP_EXPINT0 + i;
+		lmdev->irq = irq_of_parse_and_map(syscon, i);
 		lmdev->id = i;
 
 		lm_device_register(lmdev);
@@ -564,136 +567,3 @@ DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)")
 	.restart	= integrator_restart,
 	.dt_compat      = ap_dt_board_compat,
 MACHINE_END
-
-#endif
-
-#ifdef CONFIG_ATAGS
-
-/*
- * For the ATAG boot some static mappings are needed. This will
- * go away with the ATAG support down the road.
- */
-
-static struct map_desc ap_io_desc_atag[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(INTEGRATOR_SC_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_SC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	},
-};
-
-static void __init ap_map_io_atag(void)
-{
-	iotable_init(ap_io_desc_atag, ARRAY_SIZE(ap_io_desc_atag));
-	ap_map_io();
-}
-
-/*
- * This is where non-devicetree initialization code is collected and stashed
- * for eventual deletion.
- */
-
-static struct platform_device pci_v3_device = {
-	.name		= "pci-v3",
-	.id		= 0,
-};
-
-static struct resource cfi_flash_resource = {
-	.start		= INTEGRATOR_FLASH_BASE,
-	.end		= INTEGRATOR_FLASH_BASE + INTEGRATOR_FLASH_SIZE - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device cfi_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &ap_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &cfi_flash_resource,
-};
-
-static void __init ap_timer_init(void)
-{
-	struct clk *clk;
-	unsigned long rate;
-
-	clk = clk_get_sys("ap_timer", NULL);
-	BUG_ON(IS_ERR(clk));
-	clk_prepare_enable(clk);
-	rate = clk_get_rate(clk);
-
-	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
-
-	integrator_clocksource_init(rate, (void __iomem *)TIMER2_VA_BASE);
-	integrator_clockevent_init(rate, (void __iomem *)TIMER1_VA_BASE,
-				IRQ_TIMERINT1);
-}
-
-#define INTEGRATOR_SC_VALID_INT	0x003fffff
-
-static void __init ap_init_irq(void)
-{
-	/* Disable all interrupts initially. */
-	/* Do the core module ones */
-	writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
-
-	/* do the header card stuff next */
-	writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR);
-	writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
-
-	fpga_irq_init(VA_IC_BASE, "SC", IRQ_PIC_START,
-		-1, INTEGRATOR_SC_VALID_INT, NULL);
-	integrator_clk_init(false);
-}
-
-static void __init ap_init(void)
-{
-	unsigned long sc_dec;
-	int i;
-
-	platform_device_register(&pci_v3_device);
-	platform_device_register(&cfi_flash_device);
-
-	ap_syscon_base = __io_address(INTEGRATOR_SC_BASE);
-	sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET);
-	for (i = 0; i < 4; i++) {
-		struct lm_device *lmdev;
-
-		if ((sc_dec & (16 << i)) == 0)
-			continue;
-
-		lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL);
-		if (!lmdev)
-			continue;
-
-		lmdev->resource.start = 0xc0000000 + 0x10000000 * i;
-		lmdev->resource.end = lmdev->resource.start + 0x0fffffff;
-		lmdev->resource.flags = IORESOURCE_MEM;
-		lmdev->irq = IRQ_AP_EXPINT0 + i;
-		lmdev->id = i;
-
-		lm_device_register(lmdev);
-	}
-
-	integrator_init(false);
-}
-
-MACHINE_START(INTEGRATOR, "ARM-Integrator")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.reserve	= integrator_reserve,
-	.map_io		= ap_map_io_atag,
-	.init_early	= ap_init_early,
-	.init_irq	= ap_init_irq,
-	.handle_irq	= fpga_handle_irq,
-	.init_time	= ap_timer_init,
-	.init_machine	= ap_init,
-	.restart	= integrator_restart,
-MACHINE_END
-
-#endif
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 8c60fcb..1df6e76 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -36,9 +36,7 @@
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/icst.h>
 
-#include <mach/cm.h>
 #include <mach/lm.h>
-#include <mach/irqs.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
@@ -50,6 +48,7 @@
 #include <plat/clcd.h>
 #include <plat/sched_clock.h>
 
+#include "cm.h"
 #include "common.h"
 
 /* Base address to the CP controller */
@@ -249,7 +248,6 @@ static void __init intcp_init_early(void)
 #endif
 }
 
-#ifdef CONFIG_OF
 static const struct of_device_id fpga_irq_of_match[] __initconst = {
 	{ .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
 	{ /* Sentinel */ }
@@ -257,6 +255,7 @@ static const struct of_device_id fpga_irq_of_match[] __initconst = {
 
 static void __init intcp_init_irq_of(void)
 {
+	cm_init();
 	of_irq_init(fpga_irq_of_match);
 	integrator_clk_init(true);
 }
@@ -287,6 +286,11 @@ static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = {
 	{ /* sentinel */ },
 };
 
+static const struct of_device_id intcp_syscon_match[] = {
+	{ .compatible = "arm,integrator-cp-syscon"},
+	{ },
+};
+
 static void __init intcp_init_of(void)
 {
 	struct device_node *root;
@@ -301,7 +305,8 @@ static void __init intcp_init_of(void)
 	root = of_find_node_by_path("/");
 	if (!root)
 		return;
-	cpcon = of_find_node_by_path("/cpcon");
+
+	cpcon = of_find_matching_node(root, intcp_syscon_match);
 	if (!cpcon)
 		return;
 
@@ -354,175 +359,3 @@ DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)")
 	.restart	= integrator_restart,
 	.dt_compat      = intcp_dt_board_compat,
 MACHINE_END
-
-#endif
-
-#ifdef CONFIG_ATAGS
-
-/*
- * For the ATAG boot some static mappings are needed. This will
- * go away with the ATAG support down the road.
- */
-
-static struct map_desc intcp_io_desc_atag[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(INTEGRATOR_CP_CTL_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_CP_CTL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	},
-};
-
-static void __init intcp_map_io_atag(void)
-{
-	iotable_init(intcp_io_desc_atag, ARRAY_SIZE(intcp_io_desc_atag));
-	intcp_con_base = __io_address(INTEGRATOR_CP_CTL_BASE);
-	intcp_map_io();
-}
-
-
-/*
- * This is where non-devicetree initialization code is collected and stashed
- * for eventual deletion.
- */
-
-#define INTCP_FLASH_SIZE		SZ_32M
-
-static struct resource intcp_flash_resource = {
-	.start		= INTCP_PA_FLASH_BASE,
-	.end		= INTCP_PA_FLASH_BASE + INTCP_FLASH_SIZE - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device intcp_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &intcp_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &intcp_flash_resource,
-};
-
-#define INTCP_ETH_SIZE			0x10
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= INTEGRATOR_CP_ETH_BASE,
-		.end	= INTEGRATOR_CP_ETH_BASE + INTCP_ETH_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_CP_ETHINT,
-		.end	= IRQ_CP_ETHINT,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct platform_device *intcp_devs[] __initdata = {
-	&intcp_flash_device,
-	&smc91x_device,
-};
-
-#define INTCP_VA_CIC_BASE		__io_address(INTEGRATOR_HDR_BASE + 0x40)
-#define INTCP_VA_PIC_BASE		__io_address(INTEGRATOR_IC_BASE)
-#define INTCP_VA_SIC_BASE		__io_address(INTEGRATOR_CP_SIC_BASE)
-
-static void __init intcp_init_irq(void)
-{
-	u32 pic_mask, cic_mask, sic_mask;
-
-	/* These masks are for the HW IRQ registers */
-	pic_mask = ~((~0u) << (11 - 0));
-	pic_mask |= (~((~0u) << (29 - 22))) << 22;
-	cic_mask = ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START));
-	sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START));
-
-	/*
-	 * Disable all interrupt sources
-	 */
-	writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR);
-	writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR);
-	writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR);
-	writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR);
-	writel(sic_mask, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR);
-	writel(sic_mask, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR);
-
-	fpga_irq_init(INTCP_VA_PIC_BASE, "PIC", IRQ_PIC_START,
-		      -1, pic_mask, NULL);
-
-	fpga_irq_init(INTCP_VA_CIC_BASE, "CIC", IRQ_CIC_START,
-		      -1, cic_mask, NULL);
-
-	fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START,
-		      IRQ_CP_CPPLDINT, sic_mask, NULL);
-
-	integrator_clk_init(true);
-}
-
-#define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE)
-#define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE)
-#define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE)
-
-static void __init cp_timer_init(void)
-{
-	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
-
-	sp804_clocksource_init(TIMER2_VA_BASE, "timer2");
-	sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1, "timer1");
-}
-
-#define INTEGRATOR_CP_MMC_IRQS	{ IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
-#define INTEGRATOR_CP_AACI_IRQS	{ IRQ_CP_AACIINT }
-
-static AMBA_APB_DEVICE(mmc, "mmci", 0, INTEGRATOR_CP_MMC_BASE,
-	INTEGRATOR_CP_MMC_IRQS, &mmc_data);
-
-static AMBA_APB_DEVICE(aaci, "aaci", 0, INTEGRATOR_CP_AACI_BASE,
-	INTEGRATOR_CP_AACI_IRQS, NULL);
-
-static AMBA_AHB_DEVICE(clcd, "clcd", 0, INTCP_PA_CLCD_BASE,
-	{ IRQ_CP_CLCDCINT }, &clcd_data);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&mmc_device,
-	&aaci_device,
-	&clcd_device,
-};
-
-static void __init intcp_init(void)
-{
-	int i;
-
-	platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs));
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-	integrator_init(true);
-}
-
-MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.reserve	= integrator_reserve,
-	.map_io		= intcp_map_io_atag,
-	.init_early	= intcp_init_early,
-	.init_irq	= intcp_init_irq,
-	.handle_irq	= fpga_handle_irq,
-	.init_time	= cp_timer_init,
-	.init_machine	= intcp_init,
-	.restart	= integrator_restart,
-MACHINE_END
-
-#endif
diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c
index 7a7f6d3..cb6ac58 100644
--- a/arch/arm/mach-integrator/leds.c
+++ b/arch/arm/mach-integrator/leds.c
@@ -11,10 +11,11 @@
 #include <linux/slab.h>
 #include <linux/leds.h>
 
-#include <mach/cm.h>
 #include <mach/hardware.h>
 #include <mach/platform.h>
 
+#include "cm.h"
+
 #if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
 
 #define ALPHA_REG __io_address(INTEGRATOR_DBG_BASE)
@@ -78,7 +79,7 @@ static void cm_led_set(struct led_classdev *cdev,
 
 static enum led_brightness cm_led_get(struct led_classdev *cdev)
 {
-	u32 reg = readl(CM_CTRL);
+	u32 reg = cm_get();
 
 	return (reg & CM_CTRL_LED) ? LED_FULL : LED_OFF;
 }
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index bef1005..c9c5a33 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -36,7 +36,6 @@
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
-#include <mach/irqs.h>
 
 #include <asm/mach/map.h>
 #include <asm/signal.h>
@@ -605,7 +604,7 @@ v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	return 1;
 }
 
-static irqreturn_t v3_irq(int dummy, void *devid)
+static irqreturn_t v3_irq(int irq, void *devid)
 {
 #ifdef CONFIG_DEBUG_LL
 	struct pt_regs *regs = get_irq_regs();
@@ -615,7 +614,7 @@ static irqreturn_t v3_irq(int dummy, void *devid)
 	extern void printascii(const char *);
 
 	sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x "
-		"ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr,
+		"ISTAT=%02x\n", irq, pc, instr,
 		__raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFADDR_OFFSET),
 		__raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFCODE_OFFSET) & 255,
 		v3_readb(V3_LB_ISTAT));
@@ -809,32 +808,6 @@ static u8 __init pci_v3_swizzle(struct pci_dev *dev, u8 *pinp)
 	return pci_common_swizzle(dev, pinp);
 }
 
-static int irq_tab[4] __initdata = {
-	IRQ_AP_PCIINT0,	IRQ_AP_PCIINT1,	IRQ_AP_PCIINT2,	IRQ_AP_PCIINT3
-};
-
-/*
- * map the specified device/slot/pin to an IRQ.  This works out such
- * that slot 9 pin 1 is INT0, pin 2 is INT1, and slot 10 pin 1 is INT1.
- */
-static int __init pci_v3_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int intnr = ((slot - 9) + (pin - 1)) & 3;
-
-	return irq_tab[intnr];
-}
-
-static struct hw_pci pci_v3 __initdata = {
-	.swizzle		= pci_v3_swizzle,
-	.setup			= pci_v3_setup,
-	.nr_controllers		= 1,
-	.ops			= &pci_v3_ops,
-	.preinit		= pci_v3_preinit,
-	.postinit		= pci_v3_postinit,
-};
-
-#ifdef CONFIG_OF
-
 static int __init pci_v3_map_irq_dt(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	struct of_irq oirq;
@@ -851,14 +824,36 @@ static int __init pci_v3_map_irq_dt(const struct pci_dev *dev, u8 slot, u8 pin)
 				     oirq.size);
 }
 
-static int __init pci_v3_dtprobe(struct platform_device *pdev,
-				struct device_node *np)
+static struct hw_pci pci_v3 __initdata = {
+	.swizzle		= pci_v3_swizzle,
+	.setup			= pci_v3_setup,
+	.nr_controllers		= 1,
+	.ops			= &pci_v3_ops,
+	.preinit		= pci_v3_preinit,
+	.postinit		= pci_v3_postinit,
+};
+
+static int __init pci_v3_probe(struct platform_device *pdev)
 {
+	struct device_node *np = pdev->dev.of_node;
 	struct of_pci_range_parser parser;
 	struct of_pci_range range;
 	struct resource *res;
 	int irq, ret;
 
+	/* Remap the Integrator system controller */
+	ap_syscon_base = devm_ioremap(&pdev->dev, INTEGRATOR_SC_BASE, 0x100);
+	if (!ap_syscon_base) {
+		dev_err(&pdev->dev, "unable to remap the AP syscon for PCIv3\n");
+		return -ENODEV;
+	}
+
+	/* Device tree probe path */
+	if (!np) {
+		dev_err(&pdev->dev, "no device tree node for PCIv3\n");
+		return -ENODEV;
+	}
+
 	if (of_pci_range_parser_init(&parser, np))
 		return -EINVAL;
 
@@ -925,76 +920,6 @@ static int __init pci_v3_dtprobe(struct platform_device *pdev,
 	return 0;
 }
 
-#else
-
-static inline int pci_v3_dtprobe(struct platform_device *pdev,
-				  struct device_node *np)
-{
-	return -EINVAL;
-}
-
-#endif
-
-static int __init pci_v3_probe(struct platform_device *pdev)
-{
-	struct device_node *np = pdev->dev.of_node;
-	int ret;
-
-	/* Remap the Integrator system controller */
-	ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100);
-	if (!ap_syscon_base) {
-		dev_err(&pdev->dev, "unable to remap the AP syscon for PCIv3\n");
-		return -ENODEV;
-	}
-
-	/* Device tree probe path */
-	if (np)
-		return pci_v3_dtprobe(pdev, np);
-
-	pci_v3_base = devm_ioremap(&pdev->dev, PHYS_PCI_V3_BASE, SZ_64K);
-	if (!pci_v3_base) {
-		dev_err(&pdev->dev, "unable to remap PCIv3 base\n");
-		return -ENODEV;
-	}
-
-	ret = devm_request_irq(&pdev->dev, IRQ_AP_V3INT, v3_irq, 0, "V3", NULL);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to grab PCI error interrupt: %d\n",
-			ret);
-		return -ENODEV;
-	}
-
-	conf_mem.name = "PCIv3 config";
-	conf_mem.start = PHYS_PCI_CONFIG_BASE;
-	conf_mem.end = PHYS_PCI_CONFIG_BASE + SZ_16M - 1;
-	conf_mem.flags = IORESOURCE_MEM;
-
-	io_mem.name = "PCIv3 I/O";
-	io_mem.start = PHYS_PCI_IO_BASE;
-	io_mem.end = PHYS_PCI_IO_BASE + SZ_16M - 1;
-	io_mem.flags = IORESOURCE_MEM;
-
-	non_mem_pci = 0x00000000;
-	non_mem_pci_sz = SZ_256M;
-	non_mem.name = "PCIv3 non-prefetched mem";
-	non_mem.start = PHYS_PCI_MEM_BASE;
-	non_mem.end = PHYS_PCI_MEM_BASE + SZ_256M - 1;
-	non_mem.flags = IORESOURCE_MEM;
-
-	pre_mem_pci = 0x10000000;
-	pre_mem_pci_sz = SZ_256M;
-	pre_mem.name = "PCIv3 prefetched mem";
-	pre_mem.start = PHYS_PCI_PRE_BASE + SZ_256M;
-	pre_mem.end = PHYS_PCI_PRE_BASE + SZ_256M - 1;
-	pre_mem.flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
-
-	pci_v3.map_irq = pci_v3_map_irq;
-
-	pci_common_init_dev(&pdev->dev, &pci_v3);
-
-	return 0;
-}
-
 static const struct of_device_id pci_ids[] = {
 	{ .compatible = "v3,v360epc-pci", },
 	{},
diff --git a/arch/arm/mach-integrator/pci_v3.h b/arch/arm/mach-integrator/pci_v3.h
index 755fd29..06a9e2e 100644
--- a/arch/arm/mach-integrator/pci_v3.h
+++ b/arch/arm/mach-integrator/pci_v3.h
@@ -1,2 +1,9 @@
 /* Simple oneliner include to the PCIv3 early init */
+#ifdef CONFIG_PCI
 extern int pci_v3_early_init(void);
+#else
+static inline int pci_v3_early_init(void)
+{
+	return 0;
+}
+#endif
diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
deleted file mode 100644
index d869a6f..0000000
--- a/arch/arm/mach-iop13xx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * arch/arm/mach-iop13xx/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-	.macro	addruart, rp, rv, tmp
-	mov	\rp, #0x00002300
-	orr	\rp, \rp, #0x00000040
-	orr	\rv, \rp, #0xfe000000	@ virtual
-	orr	\rv, \rv, #0x00e80000
-	orr	\rp, \rp, #0xff000000	@ physical
-	orr	\rp, \rp, #0x00d80000
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S
deleted file mode 100644
index 363bdf9..0000000
--- a/arch/arm/mach-iop32x/include/mach/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0xfe000000	@ physical as well as virtual
-		orr	\rp, \rp, #0x00800000	@ location of the UART
-		mov	\rv, \rp
-		.endm
-
-#define UART_SHIFT	0
-#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S
deleted file mode 100644
index 361be1f..0000000
--- a/arch/arm/mach-iop33x/include/mach/debug-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0x00ff0000
-		orr	\rp, \rp, #0x0000f700
-		orr	\rv, #0xfe000000	@ virtual
-		orr	\rp, #0xff000000	@ physical
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
deleted file mode 100644
index ff686cb..0000000
--- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/* arch/arm/mach-ixp4xx/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-                .macro  addruart, rp, rv, tmp
-#ifdef __ARMEB__
-                mov     \rp, #3         @ Uart regs are at off set of 3 if
-					@ byte writes used - Big Endian.
-#else
-		mov	\rp, #0
-#endif
-		orr	\rv, \rp, #0xfe000000	@ virtual
-		orr	\rv, \rv, #0x00f00000
-                orr     \rp, \rp, #0xc8000000	@ physical
-                .endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
index 51a50e9..f20c53e 100644
--- a/arch/arm/mach-keystone/Kconfig
+++ b/arch/arm/mach-keystone/Kconfig
@@ -7,9 +7,10 @@ config ARCH_KEYSTONE
 	select HAVE_SMP
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
-	select HAVE_SCHED_CLOCK
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_ERRATA_798181 if SMP
+	select COMMON_CLK_KEYSTONE
+	select TI_EDMA
 	help
 	  Support for boards based on the Texas Instruments Keystone family of
 	  SoCs.
diff --git a/arch/arm/mach-keystone/Makefile b/arch/arm/mach-keystone/Makefile
index ddc52b0..25d9239 100644
--- a/arch/arm/mach-keystone/Makefile
+++ b/arch/arm/mach-keystone/Makefile
@@ -4,3 +4,6 @@ plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_smc.o				:=-Wa,-march=armv7-a$(plus_sec)
 
 obj-$(CONFIG_SMP)			+= platsmp.o
+
+# PM domain driver for Keystone SOCs
+obj-$(CONFIG_ARCH_KEYSTONE)		+= pm_domain.o
diff --git a/arch/arm/mach-keystone/platsmp.c b/arch/arm/mach-keystone/platsmp.c
index 14378e3..c1229615 100644
--- a/arch/arm/mach-keystone/platsmp.c
+++ b/arch/arm/mach-keystone/platsmp.c
@@ -38,6 +38,5 @@ static int keystone_smp_boot_secondary(unsigned int cpu,
 }
 
 struct smp_operations keystone_smp_ops __initdata = {
-	.smp_init_cpus		= arm_dt_init_cpu_maps,
 	.smp_boot_secondary	= keystone_smp_boot_secondary,
 };
diff --git a/arch/arm/mach-keystone/pm_domain.c b/arch/arm/mach-keystone/pm_domain.c
new file mode 100644
index 0000000..2962523
--- /dev/null
+++ b/arch/arm/mach-keystone/pm_domain.c
@@ -0,0 +1,82 @@
+/*
+ * PM domain driver for Keystone2 devices
+ *
+ * Copyright 2013 Texas Instruments, Inc.
+ *	Santosh Shilimkar <santosh.shillimkar@ti.com>
+ *
+ * Based on Kevins work on DAVINCI SOCs
+ *	Kevin Hilman <khilman@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/pm_runtime.h>
+#include <linux/pm_clock.h>
+#include <linux/platform_device.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+
+#ifdef CONFIG_PM_RUNTIME
+static int keystone_pm_runtime_suspend(struct device *dev)
+{
+	int ret;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	ret = pm_generic_runtime_suspend(dev);
+	if (ret)
+		return ret;
+
+	ret = pm_clk_suspend(dev);
+	if (ret) {
+		pm_generic_runtime_resume(dev);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int keystone_pm_runtime_resume(struct device *dev)
+{
+	dev_dbg(dev, "%s\n", __func__);
+
+	pm_clk_resume(dev);
+
+	return pm_generic_runtime_resume(dev);
+}
+#endif
+
+static struct dev_pm_domain keystone_pm_domain = {
+	.ops = {
+		SET_RUNTIME_PM_OPS(keystone_pm_runtime_suspend,
+				   keystone_pm_runtime_resume, NULL)
+		USE_PLATFORM_PM_SLEEP_OPS
+	},
+};
+
+static struct pm_clk_notifier_block platform_domain_notifier = {
+	.pm_domain = &keystone_pm_domain,
+};
+
+static struct of_device_id of_keystone_table[] = {
+	{.compatible = "ti,keystone"},
+	{ /* end of list */ },
+};
+
+int __init keystone_pm_runtime_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, of_keystone_table);
+	if (!np)
+		return 0;
+
+	of_clk_init(NULL);
+	pm_clk_add_notifier(&platform_bus_type, &platform_domain_notifier);
+
+	return 0;
+}
+subsys_initcall(keystone_pm_runtime_init);
diff --git a/arch/arm/mach-keystone/smc.S b/arch/arm/mach-keystone/smc.S
index 9b9e4f7..d15de81 100644
--- a/arch/arm/mach-keystone/smc.S
+++ b/arch/arm/mach-keystone/smc.S
@@ -22,8 +22,7 @@
  * Return: Non zero value on failure
  */
 ENTRY(keystone_cpu_smc)
-	stmfd   sp!, {r4-r12, lr}
+	stmfd   sp!, {r4-r11, lr}
 	smc	#0
-	dsb
-	ldmfd   sp!, {r4-r12, pc}
+	ldmfd   sp!, {r4-r11, pc}
 ENDPROC(keystone_cpu_smc)
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index b634f96..fe8319a 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -2,67 +2,32 @@ if ARCH_KIRKWOOD
 
 menu "Marvell Kirkwood Implementations"
 
+config KIRKWOOD_LEGACY
+	bool
+
 config MACH_D2NET_V2
 	bool "LaCie d2 Network v2 NAS Board"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie d2 Network v2 NAS.
 
-config MACH_DOCKSTAR
-	bool "Seagate FreeAgent DockStar"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Seagate FreeAgent DockStar.
-
-config MACH_ESATA_SHEEVAPLUG
-	bool "Marvell eSATA SheevaPlug Reference Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell eSATA SheevaPlug Reference Board.
-
-config MACH_GURUPLUG
-	bool "Marvell GuruPlug Reference Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell GuruPlug Reference Board.
-
-config MACH_INETSPACE_V2
-	bool "LaCie Internet Space v2 NAS Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  LaCie Internet Space v2 NAS.
-
-config MACH_MV88F6281GTW_GE
-	bool "Marvell 88F6281 GTW GE Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell 88F6281 GTW GE Board.
-
 config MACH_NET2BIG_V2
 	bool "LaCie 2Big Network v2 NAS Board"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie 2Big Network v2 NAS.
 
 config MACH_NET5BIG_V2
 	bool "LaCie 5Big Network v2 NAS Board"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie 5Big Network v2 NAS.
 
-config MACH_NETSPACE_MAX_V2
-	bool "LaCie Network Space Max v2 NAS Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  LaCie Network Space Max v2 NAS.
-
-config MACH_NETSPACE_V2
-	bool "LaCie Network Space v2 NAS Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  LaCie Network Space v2 NAS.
-
 config MACH_OPENRD
+	select KIRKWOOD_LEGACY
         bool
 
 config MACH_OPENRD_BASE
@@ -88,30 +53,28 @@ config MACH_OPENRD_ULTIMATE
 
 config MACH_RD88F6192_NAS
 	bool "Marvell RD-88F6192-NAS Reference Board"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell RD-88F6192-NAS Reference Board.
 
 config MACH_RD88F6281
 	bool "Marvell RD-88F6281 Reference Board"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell RD-88F6281 Reference Board.
 
-config MACH_SHEEVAPLUG
-	bool "Marvell SheevaPlug Reference Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell SheevaPlug Reference Board.
-
 config MACH_T5325
 	bool "HP t5325 Thin Client"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  HP t5325 Thin Client.
 
 config MACH_TS219
 	bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
@@ -119,6 +82,7 @@ config MACH_TS219
 
 config MACH_TS41X
 	bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo
@@ -129,6 +93,9 @@ comment "Device tree entries"
 config ARCH_KIRKWOOD_DT
 	bool "Marvell Kirkwood Flattened Device Tree"
 	select KIRKWOOD_CLK
+	select OF_IRQ
+	select ORION_IRQCHIP
+	select ORION_TIMER
 	select POWER_SUPPLY
 	select POWER_RESET
 	select POWER_RESET_GPIO
@@ -139,184 +106,12 @@ config ARCH_KIRKWOOD_DT
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Kirkwood using flattened device tree.
 
-config MACH_CLOUDBOX_DT
-	bool "LaCie CloudBox NAS (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the LaCie
-	  CloudBox NAS, using Flattened Device Tree.
-
-config MACH_DB88F628X_BP_DT
-	bool "Marvell DB-88F628x-BP Development Board (Flattened Device Tree)"
-	help
-	  Say 'Y' here if you want your kernel to support the Marvell
-	  DB-88F6281-BP and DB-88F6282-BP Development Board (Flattened
-	  Device Tree).
-
-config MACH_DLINK_KIRKWOOD_DT
-	bool "D-Link Kirkwood-based NAS (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Kirkwood-based D-Link NASes such as DNS-320 & DNS-325,
-	  using Flattened Device Tree.
-
-config MACH_DOCKSTAR_DT
-	bool "Seagate FreeAgent Dockstar (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
+config MACH_MV88F6281GTW_GE_DT
+	bool "Marvell 88F6281 GTW GE Board (Flattened Device Tree)"
+	depends on ARCH_KIRKWOOD_DT
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  Seagate FreeAgent Dockstar (Flattened Device Tree).
-
-config MACH_DREAMPLUG_DT
-	bool "Marvell DreamPlug (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell DreamPlug (Flattened Device Tree).
-
-config MACH_GOFLEXNET_DT
-	bool "Seagate GoFlex Net (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Seagate GoFlex Net (Flattened Device Tree).
-
-config MACH_GURUPLUG_DT
-	bool "Marvell GuruPlug Reference Board (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell GuruPlug Reference Board (Flattened Device Tree).
-
-config MACH_IB62X0_DT
-	bool "RaidSonic IB-NAS6210, IB-NAS6220 (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  RaidSonic IB-NAS6210 & IB-NAS6220 devices, using
-	  Flattened Device Tree.
-
-config MACH_ICONNECT_DT
-	bool "Iomega Iconnect (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here to enable Iomega Iconnect support.
-
-config MACH_INETSPACE_V2_DT
-	bool "LaCie Internet Space v2 NAS (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the LaCie
-	  Internet Space v2 NAS, using Flattened Device Tree.
-
-config MACH_IOMEGA_IX2_200_DT
-	bool "Iomega StorCenter ix2-200 (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Iomega StorCenter ix2-200 (Flattened Device Tree).
-
-config MACH_KM_KIRKWOOD_DT
-	bool "Keymile Kirkwood Reference Design (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Keymile Kirkwood Reference Desgin, using Flattened Device Tree.
-
-config MACH_LSXL_DT
-	bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	select POWER_RESET_RESTART
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using
-	  Flattened Device Tree.
-
-config MACH_MPLCEC4_DT
-	bool "MPL CEC4 (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  MPL CEC4 (Flattened Device Tree).
-
-config MACH_NETSPACE_LITE_V2_DT
-	bool "LaCie Network Space Lite v2 NAS (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the LaCie
-	  Network Space Lite v2 NAS, using Flattened Device Tree.
-
-config MACH_NETSPACE_MAX_V2_DT
-	bool "LaCie Network Space Max v2 NAS (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the LaCie
-	  Network Space Max v2 NAS, using Flattened Device Tree.
-
-config MACH_NETSPACE_MINI_V2_DT
-	bool "LaCie Network Space Mini v2 NAS (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the LaCie
-	  Network Space Mini v2 NAS using Flattened Device Tree.
-
-	  This board is embedded in a product named CloudBox, which
-	  provides automatic backup on a 100GB cloud storage. This
-	  should not confused with a more recent LaCie NAS also named
-	  CloudBox. For this last, the disk capacity is 1TB or above.
-
-config MACH_NETSPACE_V2_DT
-	bool "LaCie Network Space v2 NAS (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the LaCie
-	  Network Space v2 NAS, using Flattened Device Tree.
-
-config MACH_OPENBLOCKS_A6_DT
-	bool "Plat'Home OpenBlocks A6 (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Plat'Home OpenBlocks A6 (Flattened Device Tree).
-
-config MACH_READYNAS_DT
-	bool "NETGEAR ReadyNAS Duo v2 (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	select ARM_APPENDED_DTB
-	select ARM_ATAG_DTB_COMPAT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  NETGEAR ReadyNAS Duo v2 using Fattened Device Tree.
-
-config MACH_SHEEVAPLUG_DT
-	bool "Marvell (eSATA) SheevaPlug (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell (eSATA) SheevaPlug (Flattened Device Tree).
-
-config MACH_TOPKICK_DT
-	bool "USI Topkick (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  USI Topkick, using Flattened Device Tree
-
-config MACH_TS219_DT
-	bool "Device Tree for QNAP TS-11X, TS-21X NAS"
-	select ARCH_KIRKWOOD_DT
-	select ARM_APPENDED_DTB
-	select ARM_ATAG_DTB_COMPAT
-	select POWER_RESET_QNAP
-	help
-	  Say 'Y' here if you want your kernel to support the QNAP
-	  TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
-	  TS-219P+ Turbo NAS devices using Fattened Device Tree.
-	  There are two different Device Tree descriptions, depending
-	  on if the device is based on an if the board uses the MV6281
-	  or MV6282. If you have the wrong one, the buttons will not
-	  work.
+	  Marvell 88F6281 GTW GE Board (Flattened Device Tree).
 
 endmenu
 
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index ac4cd75..144b511 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -1,44 +1,16 @@
-obj-y				+= common.o irq.o pcie.o mpp.o
+obj-y				+= common.o pcie.o
+obj-$(CONFIG_KIRKWOOD_LEGACY)	+= irq.o mpp.o
+obj-$(CONFIG_PM)		+= pm.o
 
 obj-$(CONFIG_MACH_D2NET_V2)		+= d2net_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_DOCKSTAR)		+= dockstar-setup.o
-obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)	+= sheevaplug-setup.o
-obj-$(CONFIG_MACH_GURUPLUG)		+= guruplug-setup.o
-obj-$(CONFIG_MACH_INETSPACE_V2)		+= netspace_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_NET2BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
 obj-$(CONFIG_MACH_NET5BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_NETSPACE_MAX_V2)	+= netspace_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_NETSPACE_V2)		+= netspace_v2-setup.o lacie_v2-common.o
 obj-$(CONFIG_MACH_OPENRD)		+= openrd-setup.o
 obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6192-nas-setup.o
 obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
-obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_T5325)		+= t5325-setup.o
 obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
 
 obj-$(CONFIG_ARCH_KIRKWOOD_DT)		+= board-dt.o
-obj-$(CONFIG_MACH_CLOUDBOX_DT)		+= board-ns2.o
-obj-$(CONFIG_MACH_DB88F628X_BP_DT)	+= board-db88f628x-bp.o
-obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT)	+= board-dnskw.o
-obj-$(CONFIG_MACH_DOCKSTAR_DT)		+= board-dockstar.o
-obj-$(CONFIG_MACH_DREAMPLUG_DT)		+= board-dreamplug.o
-obj-$(CONFIG_MACH_GOFLEXNET_DT)		+= board-goflexnet.o
-obj-$(CONFIG_MACH_GURUPLUG_DT)		+= board-guruplug.o
-obj-$(CONFIG_MACH_IB62X0_DT)		+= board-ib62x0.o
-obj-$(CONFIG_MACH_ICONNECT_DT)		+= board-iconnect.o
-obj-$(CONFIG_MACH_INETSPACE_V2_DT)	+= board-ns2.o
-obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT)	+= board-iomega_ix2_200.o
-obj-$(CONFIG_MACH_KM_KIRKWOOD_DT)	+= board-km_kirkwood.o
-obj-$(CONFIG_MACH_LSXL_DT)		+= board-lsxl.o
-obj-$(CONFIG_MACH_MPLCEC4_DT)		+= board-mplcec4.o
-obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT)	+= board-ns2.o
-obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT)	+= board-ns2.o
-obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT)	+= board-ns2.o
-obj-$(CONFIG_MACH_NETSPACE_V2_DT)	+= board-ns2.o
-obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT)	+= board-openblocks_a6.o
-obj-$(CONFIG_MACH_READYNAS_DT)		+= board-readynas.o
-obj-$(CONFIG_MACH_SHEEVAPLUG_DT)	+= board-sheevaplug.o
-obj-$(CONFIG_MACH_TOPKICK_DT)		+= board-usi_topkick.o
-obj-$(CONFIG_MACH_TS219_DT)		+= board-ts219.o tsx1x-common.o
+obj-$(CONFIG_MACH_MV88F6281GTW_GE_DT)	+= board-mv88f6281gtw_ge.o
diff --git a/arch/arm/mach-kirkwood/board-db88f628x-bp.c b/arch/arm/mach-kirkwood/board-db88f628x-bp.c
deleted file mode 100644
index 2f574bc..0000000
--- a/arch/arm/mach-kirkwood/board-db88f628x-bp.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Saeed Bishara <saeed@marvell.com>
- *
- * Marvell DB-88F628{1,2}-BP Development Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data db88f628x_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-void __init db88f628x_init(void)
-{
-	kirkwood_ge00_init(&db88f628x_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c
deleted file mode 100644
index a1aa87f..0000000
--- a/arch/arm/mach-kirkwood/board-dnskw.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright 2012 (C), Jamie Lentin <jm@lentin.co.uk>
- *
- * arch/arm/mach-kirkwood/board-dnskw.c
- *
- * D-link DNS-320 & DNS-325 NAS Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data dnskw_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-/* Register any GPIO for output and set the value */
-static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
-{
-	if (gpio_request(gpio, name) == 0 &&
-	    gpio_direction_output(gpio, 0) == 0) {
-		gpio_set_value(gpio, def);
-		if (gpio_export(gpio, 0) != 0)
-			pr_err("dnskw: Failed to export GPIO %s\n", name);
-	} else
-		pr_err("dnskw: Failed to register %s\n", name);
-}
-
-void __init dnskw_init(void)
-{
-	kirkwood_ge00_init(&dnskw_ge00_data);
-
-	/* Set NAS to turn back on after a power failure */
-	dnskw_gpio_register(37, "dnskw:power:recover", 1);
-}
diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c
deleted file mode 100644
index d7196db..0000000
--- a/arch/arm/mach-kirkwood/board-dockstar.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/board-dockstar.c
- *
- * Seagate FreeAgent Dockstar Board Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Copied and modified for Seagate GoFlex Net support by
- * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's
- * GoFlex kernel patches.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data dockstar_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init dockstar_dt_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&dockstar_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c
deleted file mode 100644
index 0903242..0000000
--- a/arch/arm/mach-kirkwood/board-dreamplug.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
- *
- * arch/arm/mach-kirkwood/board-dreamplug.c
- *
- * Marvell DreamPlug Reference Board Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
-};
-
-void __init dreamplug_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&dreamplug_ge00_data);
-	kirkwood_ge01_init(&dreamplug_ge01_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index 6e122ed..9caa4fe 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -13,8 +13,12 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_net.h>
 #include <linux/of_platform.h>
 #include <linux/clk-provider.h>
+#include <linux/dma-mapping.h>
+#include <linux/irqchip.h>
 #include <linux/kexec.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -41,18 +45,6 @@ static void __init kirkwood_legacy_clk_init(void)
 	clkspec.np = np;
 	clkspec.args_count = 1;
 
-	clkspec.args[0] = CGC_BIT_PEX0;
-	orion_clkdev_add("0", "pcie",
-			 of_clk_get_from_provider(&clkspec));
-
-	clkspec.args[0] = CGC_BIT_PEX1;
-	orion_clkdev_add("1", "pcie",
-			 of_clk_get_from_provider(&clkspec));
-
-	clkspec.args[0] = CGC_BIT_SDIO;
-	orion_clkdev_add(NULL, "mvsdio",
-			 of_clk_get_from_provider(&clkspec));
-
 	/*
 	 * The ethernet interfaces forget the MAC address assigned by
 	 * u-boot if the clocks are turned off. Until proper DT support
@@ -60,19 +52,90 @@ static void __init kirkwood_legacy_clk_init(void)
 	 */
 	clkspec.args[0] = CGC_BIT_GE0;
 	clk = of_clk_get_from_provider(&clkspec);
-	orion_clkdev_add(NULL, "mv643xx_eth_port.0", clk);
 	clk_prepare_enable(clk);
 
 	clkspec.args[0] = CGC_BIT_GE1;
 	clk = of_clk_get_from_provider(&clkspec);
-	orion_clkdev_add(NULL, "mv643xx_eth_port.1", clk);
 	clk_prepare_enable(clk);
 }
 
-static void __init kirkwood_of_clk_init(void)
+#define MV643XX_ETH_MAC_ADDR_LOW	0x0414
+#define MV643XX_ETH_MAC_ADDR_HIGH	0x0418
+
+static void __init kirkwood_dt_eth_fixup(void)
 {
-	of_clk_init(NULL);
-	kirkwood_legacy_clk_init();
+	struct device_node *np;
+
+	/*
+	 * The ethernet interfaces forget the MAC address assigned by u-boot
+	 * if the clocks are turned off. Usually, u-boot on kirkwood boards
+	 * has no DT support to properly set local-mac-address property.
+	 * As a workaround, we get the MAC address from mv643xx_eth registers
+	 * and update the port device node if no valid MAC address is set.
+	 */
+	for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") {
+		struct device_node *pnp = of_get_parent(np);
+		struct clk *clk;
+		struct property *pmac;
+		void __iomem *io;
+		u8 *macaddr;
+		u32 reg;
+
+		if (!pnp)
+			continue;
+
+		/* skip disabled nodes or nodes with valid MAC address*/
+		if (!of_device_is_available(pnp) || of_get_mac_address(np))
+			goto eth_fixup_skip;
+
+		clk = of_clk_get(pnp, 0);
+		if (IS_ERR(clk))
+			goto eth_fixup_skip;
+
+		io = of_iomap(pnp, 0);
+		if (!io)
+			goto eth_fixup_no_map;
+
+		/* ensure port clock is not gated to not hang CPU */
+		clk_prepare_enable(clk);
+
+		/* store MAC address register contents in local-mac-address */
+		pr_err(FW_INFO "%s: local-mac-address is not set\n",
+		       np->full_name);
+
+		pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
+		if (!pmac)
+			goto eth_fixup_no_mem;
+
+		pmac->value = pmac + 1;
+		pmac->length = 6;
+		pmac->name = kstrdup("local-mac-address", GFP_KERNEL);
+		if (!pmac->name) {
+			kfree(pmac);
+			goto eth_fixup_no_mem;
+		}
+
+		macaddr = pmac->value;
+		reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH);
+		macaddr[0] = (reg >> 24) & 0xff;
+		macaddr[1] = (reg >> 16) & 0xff;
+		macaddr[2] = (reg >> 8) & 0xff;
+		macaddr[3] = reg & 0xff;
+
+		reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW);
+		macaddr[4] = (reg >> 8) & 0xff;
+		macaddr[5] = reg & 0xff;
+
+		of_update_property(np, pmac);
+
+eth_fixup_no_mem:
+		iounmap(io);
+		clk_disable_unprepare(clk);
+eth_fixup_no_map:
+		clk_put(clk);
+eth_fixup_skip:
+		of_node_put(pnp);
+	}
 }
 
 static void __init kirkwood_dt_init(void)
@@ -87,120 +150,36 @@ static void __init kirkwood_dt_init(void)
 	 */
 	writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
 
-	kirkwood_setup_wins();
+	BUG_ON(mvebu_mbus_dt_init());
 
 	kirkwood_l2_init();
 
 	kirkwood_cpufreq_init();
-
-	/* Setup root of clk tree */
-	kirkwood_of_clk_init();
-
 	kirkwood_cpuidle_init();
+	/* Setup clocks for legacy devices */
+	kirkwood_legacy_clk_init();
+
+	kirkwood_pm_init();
+	kirkwood_dt_eth_fixup();
 
 #ifdef CONFIG_KEXEC
 	kexec_reinit = kirkwood_enable_pcie;
 #endif
 
-	if (of_machine_is_compatible("globalscale,dreamplug"))
-		dreamplug_init();
-
-	if (of_machine_is_compatible("globalscale,guruplug"))
-		guruplug_dt_init();
-
-	if (of_machine_is_compatible("globalscale,sheevaplug"))
-		sheevaplug_dt_init();
-
-	if (of_machine_is_compatible("dlink,dns-kirkwood"))
-		dnskw_init();
-
-	if (of_machine_is_compatible("iom,iconnect"))
-		iconnect_init();
-
-	if (of_machine_is_compatible("raidsonic,ib-nas62x0"))
-		ib62x0_init();
-
-	if (of_machine_is_compatible("qnap,ts219"))
-		qnap_dt_ts219_init();
-
-	if (of_machine_is_compatible("seagate,dockstar"))
-		dockstar_dt_init();
-
-	if (of_machine_is_compatible("seagate,goflexnet"))
-		goflexnet_init();
-
-	if (of_machine_is_compatible("buffalo,lsxl"))
-		lsxl_init();
-
-	if (of_machine_is_compatible("iom,ix2-200"))
-		iomega_ix2_200_init();
-
-	if (of_machine_is_compatible("keymile,km_kirkwood"))
-		km_kirkwood_init();
-
-	if (of_machine_is_compatible("lacie,cloudbox") ||
-	    of_machine_is_compatible("lacie,inetspace_v2") ||
-	    of_machine_is_compatible("lacie,netspace_lite_v2") ||
-	    of_machine_is_compatible("lacie,netspace_max_v2") ||
-	    of_machine_is_compatible("lacie,netspace_mini_v2") ||
-	    of_machine_is_compatible("lacie,netspace_v2"))
-		ns2_init();
-
-	if (of_machine_is_compatible("marvell,db-88f6281-bp") ||
-	    of_machine_is_compatible("marvell,db-88f6282-bp"))
-		db88f628x_init();
-
-	if (of_machine_is_compatible("mpl,cec4"))
-		mplcec4_init();
-
-	if (of_machine_is_compatible("netgear,readynas-duo-v2"))
-		netgear_readynas_init();
-
-	if (of_machine_is_compatible("plathome,openblocks-a6"))
-		openblocks_a6_init();
-
-	if (of_machine_is_compatible("usi,topkick"))
-		usi_topkick_init();
+	if (of_machine_is_compatible("marvell,mv88f6281gtw-ge"))
+		mv88f6281gtw_ge_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char * const kirkwood_dt_board_compat[] = {
-	"globalscale,dreamplug",
-	"globalscale,guruplug",
-	"globalscale,sheevaplug",
-	"dlink,dns-320",
-	"dlink,dns-325",
-	"iom,iconnect",
-	"raidsonic,ib-nas62x0",
-	"qnap,ts219",
-	"seagate,dockstar",
-	"seagate,goflexnet",
-	"buffalo,lsxl",
-	"iom,ix2-200",
-	"keymile,km_kirkwood",
-	"lacie,cloudbox",
-	"lacie,inetspace_v2",
-	"lacie,netspace_lite_v2",
-	"lacie,netspace_max_v2",
-	"lacie,netspace_mini_v2",
-	"lacie,netspace_v2",
-	"marvell,db-88f6281-bp",
-	"marvell,db-88f6282-bp",
-	"mpl,cec4",
-	"netgear,readynas-duo-v2",
-	"plathome,openblocks-a6",
-	"usi,topkick",
-	"zyxel,nsa310",
+	"marvell,kirkwood",
 	NULL
 };
 
 DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
 	/* Maintainer: Jason Cooper <jason@lakedaemon.net> */
 	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= orion_dt_init_irq,
-	.init_time	= kirkwood_timer_init,
 	.init_machine	= kirkwood_dt_init,
 	.restart	= kirkwood_restart,
 	.dt_compat	= kirkwood_dt_board_compat,
diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c
deleted file mode 100644
index 9db979a..0000000
--- a/arch/arm/mach-kirkwood/board-goflexnet.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
- *
- * arch/arm/mach-kirkwood/board-goflexnet.c
- *
- * Seagate GoFlext Net Board Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Copied and modified for Seagate GoFlex Net support by
- * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's
- * GoFlex kernel patches.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data goflexnet_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init goflexnet_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&goflexnet_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-guruplug.c b/arch/arm/mach-kirkwood/board-guruplug.c
deleted file mode 100644
index a857163..0000000
--- a/arch/arm/mach-kirkwood/board-guruplug.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/board-guruplug.c
- *
- * Marvell Guruplug Reference Board Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data guruplug_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data guruplug_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
-};
-
-void __init guruplug_dt_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&guruplug_ge00_data);
-	kirkwood_ge01_init(&guruplug_ge01_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
deleted file mode 100644
index 9a857ae..0000000
--- a/arch/arm/mach-kirkwood/board-ib62x0.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright 2012 (C), Simon Baatz <gmbnomis@gmail.com>
- *
- * arch/arm/mach-kirkwood/board-ib62x0.c
- *
- * RaidSonic ICY BOX IB-NAS6210 & IB-NAS6220 init for drivers not
- * converted to flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-void __init ib62x0_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&ib62x0_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
deleted file mode 100644
index 98b5ad1..0000000
--- a/arch/arm/mach-kirkwood/board-iconnect.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/board-iconnect.c
- *
- * Iomega i-connect Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data iconnect_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
-};
-
-void __init iconnect_init(void)
-{
-	kirkwood_ge00_init(&iconnect_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
deleted file mode 100644
index e5f7041..0000000
--- a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/board-iomega_ix2_200.c
- *
- * Iomega StorCenter ix2-200
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
-	.phy_addr       = MV643XX_ETH_PHY_NONE,
-	.speed          = SPEED_1000,
-	.duplex         = DUPLEX_FULL,
-};
-
-static struct mv643xx_eth_platform_data iomega_ix2_200_ge01_data = {
-        .phy_addr       = MV643XX_ETH_PHY_ADDR(11),
-};
-
-void __init iomega_ix2_200_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&iomega_ix2_200_ge00_data);
-	kirkwood_ge01_init(&iomega_ix2_200_ge01_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-km_kirkwood.c b/arch/arm/mach-kirkwood/board-km_kirkwood.c
deleted file mode 100644
index 44e4605..0000000
--- a/arch/arm/mach-kirkwood/board-km_kirkwood.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright 2012 2012 KEYMILE AG, CH-3097 Bern
- * Valentin Longchamp <valentin.longchamp@keymile.com>
- *
- * arch/arm/mach-kirkwood/board-km_kirkwood.c
- *
- * Keymile km_kirkwood Reference Desing Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/clk.h>
-#include <linux/clk-private.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init km_kirkwood_init(void)
-{
-	struct clk *sata_clk;
-	/*
-	 * Our variant of kirkwood (integrated in the Bobcat) hangs on accessing
-	 * SATA bits (14-15) of the Clock Gating Control Register. Since these
-	 * devices are also not present in this variant, their clocks get
-	 * disabled because unused when clk_disable_unused() gets called.
-	 * That's why we change the flags to these clocks to CLK_IGNORE_UNUSED
-	 */
-	sata_clk = clk_get_sys("sata_mv.0", "0");
-	if (!IS_ERR(sata_clk))
-		sata_clk->flags |= CLK_IGNORE_UNUSED;
-	sata_clk = clk_get_sys("sata_mv.0", "1");
-	if (!IS_ERR(sata_clk))
-		sata_clk->flags |= CLK_IGNORE_UNUSED;
-
-	kirkwood_ge00_init(&km_kirkwood_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c
deleted file mode 100644
index 3483952..0000000
--- a/arch/arm/mach-kirkwood/board-lsxl.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright 2012 (C), Michael Walle <michael@walle.cc>
- *
- * arch/arm/mach-kirkwood/board-lsxl.c
- *
- * Buffalo Linkstation LS-XHL and LS-CHLv2 init for drivers not
- * converted to flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data lsxl_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data lsxl_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-void __init lsxl_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-
-	kirkwood_ge00_init(&lsxl_ge00_data);
-	kirkwood_ge01_init(&lsxl_ge01_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c
deleted file mode 100644
index 938712e..0000000
--- a/arch/arm/mach-kirkwood/board-mplcec4.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) 2012 MPL AG, Switzerland
- * Stefan Peter <s.peter@mpl.ch>
- *
- * arch/arm/mach-kirkwood/board-mplcec4.c
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data mplcec4_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
-};
-
-static struct mv643xx_eth_platform_data mplcec4_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(2),
-};
-
-void __init mplcec4_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&mplcec4_ge00_data);
-	kirkwood_ge01_init(&mplcec4_ge01_data);
-}
-
-
-
diff --git a/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c b/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c
new file mode 100644
index 0000000..ee5eea6
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c
+ *
+ * Marvell 88F6281 GTW GE Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/timer.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/gpio.h>
+#include <net/dsa.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_NONE,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
+};
+
+static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = {
+	.port_names[0]	= "lan1",
+	.port_names[1]	= "lan2",
+	.port_names[2]	= "lan3",
+	.port_names[3]	= "lan4",
+	.port_names[4]	= "wan",
+	.port_names[5]	= "cpu",
+};
+
+static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = {
+	.nr_chips	= 1,
+	.chip		= &mv88f6281gtw_ge_switch_chip_data,
+};
+
+void __init mv88f6281gtw_ge_init(void)
+{
+	kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data);
+	kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ);
+}
diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c
deleted file mode 100644
index f8f6605..0000000
--- a/arch/arm/mach-kirkwood/board-ns2.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright 2012 (C), Simon Guinot <simon.guinot@sequanux.org>
- *
- * arch/arm/mach-kirkwood/board-ns2.c
- *
- * LaCie Network Space v2 board (and parents) initialization for drivers
- * not converted to flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/of.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data ns2_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-void __init ns2_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	if (of_machine_is_compatible("lacie,cloudbox") ||
-	    of_machine_is_compatible("lacie,netspace_lite_v2") ||
-	    of_machine_is_compatible("lacie,netspace_mini_v2"))
-		ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
-	kirkwood_ge00_init(&ns2_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-openblocks_a6.c b/arch/arm/mach-kirkwood/board-openblocks_a6.c
deleted file mode 100644
index b11d8fd..0000000
--- a/arch/arm/mach-kirkwood/board-openblocks_a6.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright 2012 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
- * arch/arm/mach-kirkwood/board-openblocks_a6.c
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data openblocks_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init openblocks_a6_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&openblocks_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-readynas.c b/arch/arm/mach-kirkwood/board-readynas.c
deleted file mode 100644
index 341b82d..0000000
--- a/arch/arm/mach-kirkwood/board-readynas.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * NETGEAR ReadyNAS Duo v2 Board setup for drivers not already
- * converted to DT.
- *
- * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data netgear_readynas_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init netgear_readynas_init(void)
-{
-	kirkwood_ge00_init(&netgear_readynas_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-sheevaplug.c b/arch/arm/mach-kirkwood/board-sheevaplug.c
deleted file mode 100644
index fa38937..0000000
--- a/arch/arm/mach-kirkwood/board-sheevaplug.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/board-sheevaplug.c
- *
- * Marvell Sheevaplug Reference Board Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init sheevaplug_dt_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&sheevaplug_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c
deleted file mode 100644
index 860f44a..0000000
--- a/arch/arm/mach-kirkwood/board-ts219.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *
- * QNAP TS-11x/TS-21x Turbo NAS Board Setup via DT
- *
- * Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch>
- *
- * Based on the board file ts219-setup.c:
- *
- * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
- * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-void __init qnap_dt_ts219_init(void)
-{
-	u32 dev, rev;
-
-	kirkwood_pcie_id(&dev, &rev);
-	if (dev == MV88F6282_DEV_ID)
-		qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
-
-	kirkwood_ge00_init(&qnap_ts219_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c
deleted file mode 100644
index 1cc04ec..0000000
--- a/arch/arm/mach-kirkwood/board-usi_topkick.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
- *
- * arch/arm/mach-kirkwood/board-usi_topkick.c
- *
- * USI Topkick Init for drivers not converted to flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data topkick_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init usi_topkick_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&topkick_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index e9238b5..f3407a5 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -37,6 +37,12 @@
 #include <linux/platform_data/dma-mv_xor.h>
 #include "common.h"
 
+/* These can go away once Kirkwood uses the mvebu-mbus DT binding */
+#define KIRKWOOD_MBUS_NAND_TARGET 0x01
+#define KIRKWOOD_MBUS_NAND_ATTR   0x2f
+#define KIRKWOOD_MBUS_SRAM_TARGET 0x03
+#define KIRKWOOD_MBUS_SRAM_ATTR   0x01
+
 /*****************************************************************************
  * I/O Address Mapping
  ****************************************************************************/
@@ -264,7 +270,7 @@ void __init kirkwood_clk_init(void)
 	orion_clkdev_add(NULL, MV_XOR_NAME ".1", xor1);
 	orion_clkdev_add("0", "pcie", pex0);
 	orion_clkdev_add("1", "pcie", pex1);
-	orion_clkdev_add(NULL, "kirkwood-i2s", audio);
+	orion_clkdev_add(NULL, "mvebu-audio", audio);
 	orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", runit);
 	orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".1", runit);
 
@@ -528,10 +534,6 @@ void __init kirkwood_cpuidle_init(void)
 void __init kirkwood_init_early(void)
 {
 	orion_time_set_base(TIMER_VIRT_BASE);
-
-	mvebu_mbus_init("marvell,kirkwood-mbus",
-			BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
-			DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ);
 }
 
 int kirkwood_tclk;
@@ -560,7 +562,7 @@ void __init kirkwood_timer_init(void)
 /*****************************************************************************
  * Audio
  ****************************************************************************/
-static struct resource kirkwood_i2s_resources[] = {
+static struct resource kirkwood_audio_resources[] = {
 	[0] = {
 		.start  = AUDIO_PHYS_BASE,
 		.end    = AUDIO_PHYS_BASE + SZ_16K - 1,
@@ -573,29 +575,23 @@ static struct resource kirkwood_i2s_resources[] = {
 	},
 };
 
-static struct kirkwood_asoc_platform_data kirkwood_i2s_data = {
+static struct kirkwood_asoc_platform_data kirkwood_audio_data = {
 	.burst       = 128,
 };
 
-static struct platform_device kirkwood_i2s_device = {
-	.name		= "kirkwood-i2s",
+static struct platform_device kirkwood_audio_device = {
+	.name		= "mvebu-audio",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(kirkwood_i2s_resources),
-	.resource	= kirkwood_i2s_resources,
+	.num_resources	= ARRAY_SIZE(kirkwood_audio_resources),
+	.resource	= kirkwood_audio_resources,
 	.dev		= {
-		.platform_data	= &kirkwood_i2s_data,
+		.platform_data	= &kirkwood_audio_data,
 	},
 };
 
-static struct platform_device kirkwood_pcm_device = {
-	.name		= "kirkwood-pcm-audio",
-	.id		= -1,
-};
-
 void __init kirkwood_audio_init(void)
 {
-	platform_device_register(&kirkwood_i2s_device);
-	platform_device_register(&kirkwood_pcm_device);
+	platform_device_register(&kirkwood_audio_device);
 }
 
 /*****************************************************************************
@@ -672,10 +668,14 @@ char * __init kirkwood_id(void)
 
 void __init kirkwood_setup_wins(void)
 {
-	mvebu_mbus_add_window("nand", KIRKWOOD_NAND_MEM_PHYS_BASE,
-			      KIRKWOOD_NAND_MEM_SIZE);
-	mvebu_mbus_add_window("sram", KIRKWOOD_SRAM_PHYS_BASE,
-			      KIRKWOOD_SRAM_SIZE);
+	mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_NAND_TARGET,
+				    KIRKWOOD_MBUS_NAND_ATTR,
+				    KIRKWOOD_NAND_MEM_PHYS_BASE,
+				    KIRKWOOD_NAND_MEM_SIZE);
+	mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_SRAM_TARGET,
+				    KIRKWOOD_MBUS_SRAM_ATTR,
+				    KIRKWOOD_SRAM_PHYS_BASE,
+				    KIRKWOOD_SRAM_SIZE);
 }
 
 void __init kirkwood_l2_init(void)
@@ -703,6 +703,10 @@ void __init kirkwood_init(void)
 	 */
 	writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
 
+	BUG_ON(mvebu_mbus_init("marvell,kirkwood-mbus",
+			BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
+			DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ));
+
 	kirkwood_setup_wins();
 
 	kirkwood_l2_init();
@@ -717,6 +721,7 @@ void __init kirkwood_init(void)
 	kirkwood_xor1_init();
 	kirkwood_crypto_init();
 
+	kirkwood_pm_init();
 	kirkwood_cpuidle_init();
 #ifdef CONFIG_KEXEC
 	kexec_reinit = kirkwood_enable_pcie;
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index fcf3ba6..05fd648 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -58,120 +58,17 @@ void kirkwood_cpufreq_init(void);
 void kirkwood_restart(enum reboot_mode, const char *);
 void kirkwood_clk_init(void);
 
-/* board init functions for boards not fully converted to fdt */
-#ifdef CONFIG_MACH_DREAMPLUG_DT
-void dreamplug_init(void);
-#else
-static inline void dreamplug_init(void) {};
-#endif
-#ifdef CONFIG_MACH_GURUPLUG_DT
-void guruplug_dt_init(void);
-#else
-static inline void guruplug_dt_init(void) {};
-#endif
-#ifdef CONFIG_MACH_SHEEVAPLUG_DT
-void sheevaplug_dt_init(void);
-#else
-static inline void sheevaplug_dt_init(void) {};
-#endif
-#ifdef CONFIG_MACH_TS219_DT
-void qnap_dt_ts219_init(void);
-#else
-static inline void qnap_dt_ts219_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_DLINK_KIRKWOOD_DT
-void dnskw_init(void);
-#else
-static inline void dnskw_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_ICONNECT_DT
-void iconnect_init(void);
-#else
-static inline void iconnect_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_IB62X0_DT
-void ib62x0_init(void);
-#else
-static inline void ib62x0_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_DOCKSTAR_DT
-void dockstar_dt_init(void);
-#else
-static inline void dockstar_dt_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_GOFLEXNET_DT
-void goflexnet_init(void);
-#else
-static inline void goflexnet_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_LSXL_DT
-void lsxl_init(void);
+#ifdef CONFIG_PM
+void kirkwood_pm_init(void);
 #else
-static inline void lsxl_init(void) {};
+static inline void kirkwood_pm_init(void) {};
 #endif
 
-#ifdef CONFIG_MACH_IOMEGA_IX2_200_DT
-void iomega_ix2_200_init(void);
-#else
-static inline void iomega_ix2_200_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_KM_KIRKWOOD_DT
-void km_kirkwood_init(void);
-#else
-static inline void km_kirkwood_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_DB88F628X_BP_DT
-void db88f628x_init(void);
-#else
-static inline void db88f628x_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_MPLCEC4_DT
-void mplcec4_init(void);
-#else
-static inline void mplcec4_init(void) {};
-#endif
-
-#if defined(CONFIG_MACH_INETSPACE_V2_DT) || \
-	defined(CONFIG_MACH_NETSPACE_V2_DT) || \
-	defined(CONFIG_MACH_NETSPACE_MAX_V2_DT) || \
-	defined(CONFIG_MACH_NETSPACE_LITE_V2_DT) || \
-	defined(CONFIG_MACH_NETSPACE_MINI_V2_DT)
-void ns2_init(void);
-#else
-static inline void ns2_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_OPENBLOCKS_A6_DT
-void openblocks_a6_init(void);
-#else
-static inline void openblocks_a6_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_READYNAS_DT
-void netgear_readynas_init(void);
-#else
-static inline void netgear_readynas_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_TOPKICK_DT
-void usi_topkick_init(void);
-#else
-static inline void usi_topkick_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_CLOUDBOX_DT
-void cloudbox_init(void);
+/* board init functions for boards not fully converted to fdt */
+#ifdef CONFIG_MACH_MV88F6281GTW_GE_DT
+void mv88f6281gtw_ge_init(void);
 #else
-static inline void cloudbox_init(void) {};
+static inline void mv88f6281gtw_ge_init(void) {};
 #endif
 
 /* early init functions not converted to fdt yet */
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
deleted file mode 100644
index 060ccf9..0000000
--- a/arch/arm/mach-kirkwood/dockstar-setup.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/dockstar-setup.c
- *
- * Seagate FreeAgent DockStar Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition dockstar_nand_parts[] = {
-	{
-		.name = "u-boot",
-		.offset = 0,
-		.size = SZ_1M
-	}, {
-		.name = "uImage",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_4M
-	}, {
-		.name = "root",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL
-	},
-};
-
-static struct mv643xx_eth_platform_data dockstar_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct gpio_led dockstar_led_pins[] = {
-	{
-		.name			= "dockstar:green:health",
-		.default_trigger	= "default-on",
-		.gpio			= 46,
-		.active_low		= 1,
-	},
-	{
-		.name			= "dockstar:orange:misc",
-		.default_trigger	= "none",
-		.gpio			= 47,
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data dockstar_led_data = {
-	.leds		= dockstar_led_pins,
-	.num_leds	= ARRAY_SIZE(dockstar_led_pins),
-};
-
-static struct platform_device dockstar_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &dockstar_led_data,
-	}
-};
-
-static unsigned int dockstar_mpp_config[] __initdata = {
-	MPP29_GPIO,	/* USB Power Enable */
-	MPP46_GPIO,	/* LED green */
-	MPP47_GPIO,	/* LED orange */
-	0
-};
-
-static void __init dockstar_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-
-	/* setup gpio pin select */
-	kirkwood_mpp_conf(dockstar_mpp_config);
-
-	kirkwood_uart0_init();
-	kirkwood_nand_init(ARRAY_AND_SIZE(dockstar_nand_parts), 25);
-
-	if (gpio_request(29, "USB Power Enable") != 0 ||
-	    gpio_direction_output(29, 1) != 0)
-		pr_err("can't set up GPIO 29 (USB Power Enable)\n");
-	kirkwood_ehci_init();
-
-	kirkwood_ge00_init(&dockstar_ge00_data);
-
-	platform_device_register(&dockstar_leds);
-}
-
-MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar")
-	.atag_offset	= 0x100,
-	.init_machine	= dockstar_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.init_time	= kirkwood_timer_init,
-	.restart	= kirkwood_restart,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
deleted file mode 100644
index 08dd739..0000000
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/guruplug-setup.c
- *
- * Marvell GuruPlug Reference Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <linux/platform_data/mmc-mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition guruplug_nand_parts[] = {
-	{
-		.name = "u-boot",
-		.offset = 0,
-		.size = SZ_1M
-	}, {
-		.name = "uImage",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_4M
-	}, {
-		.name = "root",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL
-	},
-};
-
-static struct mv643xx_eth_platform_data guruplug_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data guruplug_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
-};
-
-static struct mv_sata_platform_data guruplug_sata_data = {
-	.n_ports	= 1,
-};
-
-static struct mvsdio_platform_data guruplug_mvsdio_data = {
-	/* unfortunately the CD signal has not been connected */
-	.gpio_card_detect = -1,
-	.gpio_write_protect = -1,
-};
-
-static struct gpio_led guruplug_led_pins[] = {
-	{
-		.name			= "guruplug:red:health",
-		.gpio			= 46,
-		.active_low		= 1,
-	},
-	{
-		.name			= "guruplug:green:health",
-		.gpio			= 47,
-		.active_low		= 1,
-	},
-	{
-		.name			= "guruplug:red:wmode",
-		.gpio			= 48,
-		.active_low		= 1,
-	},
-	{
-		.name			= "guruplug:green:wmode",
-		.gpio			= 49,
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data guruplug_led_data = {
-	.leds		= guruplug_led_pins,
-	.num_leds	= ARRAY_SIZE(guruplug_led_pins),
-};
-
-static struct platform_device guruplug_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &guruplug_led_data,
-	}
-};
-
-static unsigned int guruplug_mpp_config[] __initdata = {
-	MPP46_GPIO,	/* M_RLED */
-	MPP47_GPIO,	/* M_GLED */
-	MPP48_GPIO,	/* B_RLED */
-	MPP49_GPIO,	/* B_GLED */
-	0
-};
-
-static void __init guruplug_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(guruplug_mpp_config);
-
-	kirkwood_uart0_init();
-	kirkwood_nand_init(ARRAY_AND_SIZE(guruplug_nand_parts), 25);
-
-	kirkwood_ehci_init();
-	kirkwood_ge00_init(&guruplug_ge00_data);
-	kirkwood_ge01_init(&guruplug_ge01_data);
-	kirkwood_sata_init(&guruplug_sata_data);
-	kirkwood_sdio_init(&guruplug_mvsdio_data);
-
-	platform_device_register(&guruplug_leds);
-}
-
-MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
-	/* Maintainer: Siddarth Gore <gores@marvell.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= guruplug_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.init_time	= kirkwood_timer_init,
-	.restart	= kirkwood_restart,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 91242c9..8b9d1c9 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -78,4 +78,6 @@
 #define CGC_TDM			(1 << 20)
 #define CGC_RESERVED		(0x6 << 21)
 
+#define MEMORY_PM_CTRL		(BRIDGE_VIRT_BASE + 0x118)
+
 #endif
diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
deleted file mode 100644
index f785d40..0000000
--- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <mach/bridge-regs.h>
-
-	.macro	addruart, rp, rv, tmp
-	ldr	\rp, =KIRKWOOD_REGS_PHYS_BASE
-	ldr	\rv, =KIRKWOOD_REGS_VIRT_BASE
-	orr	\rp, \rp, #0x00012000
-	orr	\rv, \rv, #0x00012000
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
deleted file mode 100644
index ba384b9..0000000
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
- *
- * Marvell 88F6281 GTW GE Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/timer.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <net/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = {
-	.port_names[0]	= "lan1",
-	.port_names[1]	= "lan2",
-	.port_names[2]	= "lan3",
-	.port_names[3]	= "lan4",
-	.port_names[4]	= "wan",
-	.port_names[5]	= "cpu",
-};
-
-static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = {
-	.nr_chips	= 1,
-	.chip		= &mv88f6281gtw_ge_switch_chip_data,
-};
-
-static const struct flash_platform_data mv88f6281gtw_ge_spi_slave_data = {
-	.type		= "mx25l12805d",
-};
-
-static struct spi_board_info __initdata mv88f6281gtw_ge_spi_slave_info[] = {
-	{
-		.modalias	= "m25p80",
-		.platform_data	= &mv88f6281gtw_ge_spi_slave_data,
-		.irq		= -1,
-		.max_speed_hz	= 50000000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-	},
-};
-
-static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = {
-	{
-		.code		= KEY_RESTART,
-		.gpio		= 47,
-		.desc		= "SWR Button",
-		.active_low	= 1,
-	}, {
-		.code		= KEY_WPS_BUTTON,
-		.gpio		= 46,
-		.desc		= "WPS Button",
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data mv88f6281gtw_ge_button_data = {
-	.buttons	= mv88f6281gtw_ge_button_pins,
-	.nbuttons	= ARRAY_SIZE(mv88f6281gtw_ge_button_pins),
-};
-
-static struct platform_device mv88f6281gtw_ge_buttons = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &mv88f6281gtw_ge_button_data,
-	},
-};
-
-static struct gpio_led mv88f6281gtw_ge_led_pins[] = {
-	{
-		.name		= "gtw:green:Status",
-		.gpio		= 20,
-		.active_low	= 0,
-	}, {
-		.name		= "gtw:red:Status",
-		.gpio		= 21,
-		.active_low	= 0,
-	}, {
-		.name		= "gtw:green:USB",
-		.gpio		= 12,
-		.active_low	= 0,
-	},
-};
-
-static struct gpio_led_platform_data mv88f6281gtw_ge_led_data = {
-	.leds		= mv88f6281gtw_ge_led_pins,
-	.num_leds	= ARRAY_SIZE(mv88f6281gtw_ge_led_pins),
-};
-
-static struct platform_device mv88f6281gtw_ge_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &mv88f6281gtw_ge_led_data,
-	},
-};
-
-static unsigned int mv88f6281gtw_ge_mpp_config[] __initdata = {
-	MPP12_GPO,	/* Status#_USB pin  */
-	MPP20_GPIO,	/* Status#_GLED pin */
-	MPP21_GPIO,	/* Status#_RLED pin */
-	MPP46_GPIO,	/* WPS_Switch pin   */
-	MPP47_GPIO,	/* SW_Init pin      */
-	0
-};
-
-static void __init mv88f6281gtw_ge_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(mv88f6281gtw_ge_mpp_config);
-
-	kirkwood_ehci_init();
-	kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data);
-	kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ);
-	spi_register_board_info(mv88f6281gtw_ge_spi_slave_info,
-				ARRAY_SIZE(mv88f6281gtw_ge_spi_slave_info));
-	kirkwood_spi_init();
-	kirkwood_uart0_init();
-	platform_device_register(&mv88f6281gtw_ge_leds);
-	platform_device_register(&mv88f6281gtw_ge_buttons);
-}
-
-static int __init mv88f6281gtw_ge_pci_init(void)
-{
-	if (machine_is_mv88f6281gtw_ge())
-		kirkwood_pcie_init(KW_PCIE0);
-
-	return 0;
-}
-subsys_initcall(mv88f6281gtw_ge_pci_init);
-
-MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= mv88f6281gtw_ge_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.init_time	= kirkwood_timer_init,
-	.restart	= kirkwood_restart,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
deleted file mode 100644
index 3b70661..0000000
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/netspace_v2-setup.c
- *
- * LaCie Network Space v2 board setup
- *
- * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
- * Copyright (C) 2009 Benoît Canet <benoit.canet@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds.h>
-#include <linux/gpio-fan.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <linux/platform_data/leds-kirkwood-ns2.h>
-#include "common.h"
-#include "mpp.h"
-#include "lacie_v2-common.h"
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data netspace_v2_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-
-static struct mv_sata_platform_data netspace_v2_sata_data = {
-	.n_ports	= 2,
-};
-
-/*****************************************************************************
- * GPIO keys
- ****************************************************************************/
-
-#define NETSPACE_V2_PUSH_BUTTON		32
-
-static struct gpio_keys_button netspace_v2_buttons[] = {
-	[0] = {
-		.code		= KEY_POWER,
-		.gpio		= NETSPACE_V2_PUSH_BUTTON,
-		.desc		= "Power push button",
-		.active_low	= 0,
-	},
-};
-
-static struct gpio_keys_platform_data netspace_v2_button_data = {
-	.buttons	= netspace_v2_buttons,
-	.nbuttons	= ARRAY_SIZE(netspace_v2_buttons),
-};
-
-static struct platform_device netspace_v2_gpio_buttons = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &netspace_v2_button_data,
-	},
-};
-
-/*****************************************************************************
- * GPIO LEDs
- ****************************************************************************/
-
-#define NETSPACE_V2_GPIO_RED_LED	12
-
-static struct gpio_led netspace_v2_gpio_led_pins[] = {
-	{
-		.name	= "ns_v2:red:fail",
-		.gpio	= NETSPACE_V2_GPIO_RED_LED,
-	},
-};
-
-static struct gpio_led_platform_data netspace_v2_gpio_leds_data = {
-	.num_leds	= ARRAY_SIZE(netspace_v2_gpio_led_pins),
-	.leds		= netspace_v2_gpio_led_pins,
-};
-
-static struct platform_device netspace_v2_gpio_leds = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &netspace_v2_gpio_leds_data,
-	},
-};
-
-/*****************************************************************************
- * Dual-GPIO CPLD LEDs
- ****************************************************************************/
-
-#define NETSPACE_V2_GPIO_BLUE_LED_SLOW	29
-#define NETSPACE_V2_GPIO_BLUE_LED_CMD	30
-
-static struct ns2_led netspace_v2_led_pins[] = {
-	{
-		.name	= "ns_v2:blue:sata",
-		.cmd	= NETSPACE_V2_GPIO_BLUE_LED_CMD,
-		.slow	= NETSPACE_V2_GPIO_BLUE_LED_SLOW,
-	},
-};
-
-static struct ns2_led_platform_data netspace_v2_leds_data = {
-	.num_leds	= ARRAY_SIZE(netspace_v2_led_pins),
-	.leds		= netspace_v2_led_pins,
-};
-
-static struct platform_device netspace_v2_leds = {
-	.name		= "leds-ns2",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &netspace_v2_leds_data,
-	},
-};
-
-/*****************************************************************************
- * GPIO fan
- ****************************************************************************/
-
-/* Designed for fan 40x40x16: ADDA AD0412LB-D50 6000rpm@12v */
-static struct gpio_fan_speed netspace_max_v2_fan_speed[] = {
-	{    0,  0 },
-	{ 1500,	15 },
-	{ 1700,	14 },
-	{ 1800,	13 },
-	{ 2100,	12 },
-	{ 3100,	11 },
-	{ 3300,	10 },
-	{ 4300,	 9 },
-	{ 5500,	 8 },
-};
-
-static unsigned netspace_max_v2_fan_ctrl[] = { 22, 7, 33, 23 };
-
-static struct gpio_fan_alarm netspace_max_v2_fan_alarm = {
-	.gpio		= 25,
-	.active_low	= 1,
-};
-
-static struct gpio_fan_platform_data netspace_max_v2_fan_data = {
-	.num_ctrl	= ARRAY_SIZE(netspace_max_v2_fan_ctrl),
-	.ctrl		= netspace_max_v2_fan_ctrl,
-	.alarm		= &netspace_max_v2_fan_alarm,
-	.num_speed	= ARRAY_SIZE(netspace_max_v2_fan_speed),
-	.speed		= netspace_max_v2_fan_speed,
-};
-
-static struct platform_device netspace_max_v2_gpio_fan = {
-	.name	= "gpio-fan",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &netspace_max_v2_fan_data,
-	},
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-static unsigned int netspace_v2_mpp_config[] __initdata = {
-	MPP0_SPI_SCn,
-	MPP1_SPI_MOSI,
-	MPP2_SPI_SCK,
-	MPP3_SPI_MISO,
-	MPP4_NF_IO6,
-	MPP5_NF_IO7,
-	MPP6_SYSRST_OUTn,
-	MPP7_GPO,		/* Fan speed (bit 1) */
-	MPP8_TW0_SDA,
-	MPP9_TW0_SCK,
-	MPP10_UART0_TXD,
-	MPP11_UART0_RXD,
-	MPP12_GPO,		/* Red led */
-	MPP14_GPIO,		/* USB fuse */
-	MPP16_GPIO,		/* SATA 0 power */
-	MPP17_GPIO,		/* SATA 1 power */
-	MPP18_NF_IO0,
-	MPP19_NF_IO1,
-	MPP20_SATA1_ACTn,
-	MPP21_SATA0_ACTn,
-	MPP22_GPIO,		/* Fan speed (bit 0) */
-	MPP23_GPIO,		/* Fan power */
-	MPP24_GPIO,		/* USB mode select */
-	MPP25_GPIO,		/* Fan rotation fail */
-	MPP26_GPIO,		/* USB device vbus */
-	MPP28_GPIO,		/* USB enable host vbus */
-	MPP29_GPIO,		/* Blue led (slow register) */
-	MPP30_GPIO,		/* Blue led (command register) */
-	MPP31_GPIO,		/* Board power off */
-	MPP32_GPIO,		/* Power button (0 = Released, 1 = Pushed) */
-	MPP33_GPO,		/* Fan speed (bit 2) */
-	0
-};
-
-#define NETSPACE_V2_GPIO_POWER_OFF	31
-
-static void netspace_v2_power_off(void)
-{
-	gpio_set_value(NETSPACE_V2_GPIO_POWER_OFF, 1);
-}
-
-static void __init netspace_v2_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(netspace_v2_mpp_config);
-
-	if (machine_is_netspace_max_v2())
-		lacie_v2_hdd_power_init(2);
-	else
-		lacie_v2_hdd_power_init(1);
-
-	kirkwood_ehci_init();
-	kirkwood_ge00_init(&netspace_v2_ge00_data);
-	kirkwood_sata_init(&netspace_v2_sata_data);
-	kirkwood_uart0_init();
-	lacie_v2_register_flash();
-	lacie_v2_register_i2c_devices();
-
-	platform_device_register(&netspace_v2_leds);
-	platform_device_register(&netspace_v2_gpio_leds);
-	platform_device_register(&netspace_v2_gpio_buttons);
-	if (machine_is_netspace_max_v2())
-		platform_device_register(&netspace_max_v2_gpio_fan);
-
-	if (gpio_request(NETSPACE_V2_GPIO_POWER_OFF, "power-off") == 0 &&
-	    gpio_direction_output(NETSPACE_V2_GPIO_POWER_OFF, 0) == 0)
-		pm_power_off = netspace_v2_power_off;
-	else
-		pr_err("netspace_v2: failed to configure power-off GPIO\n");
-}
-
-#ifdef CONFIG_MACH_NETSPACE_V2
-MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
-	.atag_offset	= 0x100,
-	.init_machine	= netspace_v2_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.init_time	= kirkwood_timer_init,
-	.restart	= kirkwood_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_INETSPACE_V2
-MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
-	.atag_offset	= 0x100,
-	.init_machine	= netspace_v2_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.init_time	= kirkwood_timer_init,
-	.restart	= kirkwood_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_NETSPACE_MAX_V2
-MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
-	.atag_offset	= 0x100,
-	.init_machine	= netspace_v2_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.init_time	= kirkwood_timer_init,
-	.restart	= kirkwood_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index 6a6eb54..e5cf841 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -158,7 +158,8 @@ static void __init openrd_init(void)
 	kirkwood_mpp_conf(openrd_mpp_config);
 
 	kirkwood_uart0_init();
-	kirkwood_nand_init(ARRAY_AND_SIZE(openrd_nand_parts), 25);
+	kirkwood_nand_init(openrd_nand_parts, ARRAY_SIZE(openrd_nand_parts),
+			   25);
 
 	kirkwood_ehci_init();
 
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index ddcb09f..12d86f3 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -20,6 +20,16 @@
 #include <mach/bridge-regs.h>
 #include "common.h"
 
+/* These can go away once Kirkwood uses the mvebu-mbus DT binding */
+#define KIRKWOOD_MBUS_PCIE0_MEM_TARGET    0x4
+#define KIRKWOOD_MBUS_PCIE0_MEM_ATTR      0xe8
+#define KIRKWOOD_MBUS_PCIE0_IO_TARGET     0x4
+#define KIRKWOOD_MBUS_PCIE0_IO_ATTR       0xe0
+#define KIRKWOOD_MBUS_PCIE1_MEM_TARGET    0x4
+#define KIRKWOOD_MBUS_PCIE1_MEM_ATTR      0xd8
+#define KIRKWOOD_MBUS_PCIE1_IO_TARGET     0x4
+#define KIRKWOOD_MBUS_PCIE1_IO_ATTR       0xd0
+
 static void kirkwood_enable_pcie_clk(const char *port)
 {
 	struct clk *clk;
@@ -254,26 +264,24 @@ static void __init add_pcie_port(int index, void __iomem *base)
 
 void __init kirkwood_pcie_init(unsigned int portmask)
 {
-	mvebu_mbus_add_window_remap_flags("pcie0.0",
+	mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE0_IO_TARGET,
+					  KIRKWOOD_MBUS_PCIE0_IO_ATTR,
 					  KIRKWOOD_PCIE_IO_PHYS_BASE,
 					  KIRKWOOD_PCIE_IO_SIZE,
-					  KIRKWOOD_PCIE_IO_BUS_BASE,
-					  MVEBU_MBUS_PCI_IO);
-	mvebu_mbus_add_window_remap_flags("pcie0.0",
-					  KIRKWOOD_PCIE_MEM_PHYS_BASE,
-					  KIRKWOOD_PCIE_MEM_SIZE,
-					  MVEBU_MBUS_NO_REMAP,
-					  MVEBU_MBUS_PCI_MEM);
-	mvebu_mbus_add_window_remap_flags("pcie1.0",
+					  KIRKWOOD_PCIE_IO_BUS_BASE);
+	mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE0_MEM_TARGET,
+				    KIRKWOOD_MBUS_PCIE0_MEM_ATTR,
+				    KIRKWOOD_PCIE_MEM_PHYS_BASE,
+				    KIRKWOOD_PCIE_MEM_SIZE);
+	mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE1_IO_TARGET,
+					  KIRKWOOD_MBUS_PCIE1_IO_ATTR,
 					  KIRKWOOD_PCIE1_IO_PHYS_BASE,
 					  KIRKWOOD_PCIE1_IO_SIZE,
-					  KIRKWOOD_PCIE1_IO_BUS_BASE,
-					  MVEBU_MBUS_PCI_IO);
-	mvebu_mbus_add_window_remap_flags("pcie1.0",
-					  KIRKWOOD_PCIE1_MEM_PHYS_BASE,
-					  KIRKWOOD_PCIE1_MEM_SIZE,
-					  MVEBU_MBUS_NO_REMAP,
-					  MVEBU_MBUS_PCI_MEM);
+					  KIRKWOOD_PCIE1_IO_BUS_BASE);
+	mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE1_MEM_TARGET,
+				    KIRKWOOD_MBUS_PCIE1_MEM_ATTR,
+				    KIRKWOOD_PCIE1_MEM_PHYS_BASE,
+				    KIRKWOOD_PCIE1_MEM_SIZE);
 
 	vga_base = KIRKWOOD_PCIE_MEM_PHYS_BASE;
 
diff --git a/arch/arm/mach-kirkwood/pm.c b/arch/arm/mach-kirkwood/pm.c
new file mode 100644
index 0000000..8783a71
--- /dev/null
+++ b/arch/arm/mach-kirkwood/pm.c
@@ -0,0 +1,73 @@
+/*
+ * Power Management driver for Marvell Kirkwood SoCs
+ *
+ * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com>
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License,
+ * version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/io.h>
+#include <mach/bridge-regs.h>
+
+static void __iomem *ddr_operation_base;
+
+static void kirkwood_low_power(void)
+{
+	u32 mem_pm_ctrl;
+
+	mem_pm_ctrl = readl(MEMORY_PM_CTRL);
+
+	/* Set peripherals to low-power mode */
+	writel_relaxed(~0, MEMORY_PM_CTRL);
+
+	/* Set DDR in self-refresh */
+	writel_relaxed(0x7, ddr_operation_base);
+
+	/*
+	 * Set CPU in wait-for-interrupt state.
+	 * This disables the CPU core clocks,
+	 * the array clocks, and also the L2 controller.
+	 */
+	cpu_do_idle();
+
+	writel_relaxed(mem_pm_ctrl, MEMORY_PM_CTRL);
+}
+
+static int kirkwood_suspend_enter(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		kirkwood_low_power();
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int kirkwood_pm_valid_standby(suspend_state_t state)
+{
+	return state == PM_SUSPEND_STANDBY;
+}
+
+static const struct platform_suspend_ops kirkwood_suspend_ops = {
+	.enter = kirkwood_suspend_enter,
+	.valid = kirkwood_pm_valid_standby,
+};
+
+int __init kirkwood_pm_init(void)
+{
+	ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4);
+	suspend_set_ops(&kirkwood_suspend_ops);
+	return 0;
+}
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index d242231..5154bd2 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -87,7 +87,9 @@ static void __init rd88f6281_init(void)
 	kirkwood_init();
 	kirkwood_mpp_conf(rd88f6281_mpp_config);
 
-	kirkwood_nand_init(ARRAY_AND_SIZE(rd88f6281_nand_parts), 25);
+	kirkwood_nand_init(rd88f6281_nand_parts,
+			   ARRAY_SIZE(rd88f6281_nand_parts),
+			   25);
 	kirkwood_ehci_init();
 
 	kirkwood_ge00_init(&rd88f6281_ge00_data);
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
deleted file mode 100644
index 55b68fa..0000000
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/sheevaplug-setup.c
- *
- * Marvell SheevaPlug Reference Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <linux/platform_data/mmc-mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition sheevaplug_nand_parts[] = {
-	{
-		.name = "u-boot",
-		.offset = 0,
-		.size = SZ_1M
-	}, {
-		.name = "uImage",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_4M
-	}, {
-		.name = "root",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL
-	},
-};
-
-static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv_sata_platform_data sheeva_esata_sata_data = {
-	.n_ports	= 2,
-};
-
-static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
-	/* unfortunately the CD signal has not been connected */
-};
-
-static struct mvsdio_platform_data sheeva_esata_mvsdio_data = {
-	.gpio_write_protect = 44, /* MPP44 used as SD write protect */
-	.gpio_card_detect = 47,	  /* MPP47 used as SD card detect */
-};
-
-static struct gpio_led sheevaplug_led_pins[] = {
-	{
-		.name			= "plug:red:misc",
-		.default_trigger	= "none",
-		.gpio			= 46,
-		.active_low		= 1,
-	},
-	{
-		.name			= "plug:green:health",
-		.default_trigger	= "default-on",
-		.gpio			= 49,
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data sheevaplug_led_data = {
-	.leds		= sheevaplug_led_pins,
-	.num_leds	= ARRAY_SIZE(sheevaplug_led_pins),
-};
-
-static struct platform_device sheevaplug_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &sheevaplug_led_data,
-	}
-};
-
-static unsigned int sheevaplug_mpp_config[] __initdata = {
-	MPP29_GPIO,	/* USB Power Enable */
-	MPP46_GPIO,	/* LED Red */
-	MPP49_GPIO,	/* LED */
-	0
-};
-
-static unsigned int sheeva_esata_mpp_config[] __initdata = {
-	MPP29_GPIO,	/* USB Power Enable */
-	MPP44_GPIO,	/* SD Write Protect */
-	MPP47_GPIO,	/* SD Card Detect */
-	MPP49_GPIO,	/* LED Green */
-	0
-};
-
-static void __init sheevaplug_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-
-	/* setup gpio pin select */
-	if (machine_is_esata_sheevaplug())
-		kirkwood_mpp_conf(sheeva_esata_mpp_config);
-	else
-		kirkwood_mpp_conf(sheevaplug_mpp_config);
-
-	kirkwood_uart0_init();
-	kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25);
-
-	if (gpio_request(29, "USB Power Enable") != 0 ||
-	    gpio_direction_output(29, 1) != 0)
-		pr_err("can't set up GPIO 29 (USB Power Enable)\n");
-	kirkwood_ehci_init();
-
-	kirkwood_ge00_init(&sheevaplug_ge00_data);
-
-	/* honor lower power consumption for plugs with out eSATA */
-	if (machine_is_esata_sheevaplug())
-		kirkwood_sata_init(&sheeva_esata_sata_data);
-
-	/* enable sd wp and sd cd on plugs with esata */
-	if (machine_is_esata_sheevaplug())
-		kirkwood_sdio_init(&sheeva_esata_mvsdio_data);
-	else
-		kirkwood_sdio_init(&sheevaplug_mvsdio_data);
-
-	platform_device_register(&sheevaplug_leds);
-}
-
-#ifdef CONFIG_MACH_SHEEVAPLUG
-MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
-	/* Maintainer: shadi Ammouri <shadi@marvell.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= sheevaplug_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.init_time	= kirkwood_timer_init,
-	.restart	= kirkwood_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
-MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
-	.atag_offset	= 0x100,
-	.init_machine	= sheevaplug_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.init_time	= kirkwood_timer_init,
-	.restart	= kirkwood_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index 456d638..9f9c044 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -20,7 +20,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 #include <linux/i2c-gpio.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
diff --git a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
deleted file mode 100644
index 351bd6c..0000000
--- a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/debug-macro.S
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/*
- * Debug output is hardcoded to standard UART 5
-*/
-
-	.macro	addruart, rp, rv, tmp
-	ldreq	\rp, =0x40090000
-	ldrne	\rv, =0xF4090000
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 095c155..9b702a1 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -2,7 +2,7 @@
 # Makefile for Marvell's PXA168 processors line
 #
 
-obj-y				+= common.o devices.o time.o irq.o
+obj-y				+= common.o devices.o time.o
 
 # SoC support
 obj-$(CONFIG_CPU_PXA168)	+= pxa168.o
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index 991d7e9..cf445ba 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -3,7 +3,6 @@
 
 extern void timer_init(int irq);
 
-extern void __init icu_init_irq(void);
 extern void __init mmp_map_io(void);
 extern void mmp_restart(enum reboot_mode, const char *);
 extern void __init pxa168_clk_init(void);
diff --git a/arch/arm/mach-mmp/include/mach/entry-macro.S b/arch/arm/mach-mmp/include/mach/entry-macro.S
deleted file mode 100644
index bd152e2..0000000
--- a/arch/arm/mach-mmp/include/mach/entry-macro.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/entry-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/irq.h>
-#include <mach/regs-icu.h>
-
-	.macro	get_irqnr_preamble, base, tmp
-	mrc	p15, 0, \tmp, c0, c0, 0		@ CPUID
-	and	\tmp, \tmp, #0xff00
-	cmp	\tmp, #0x5800
-	ldr	\base, =mmp_icu_base
-	ldr	\base, [\base, #0]
-	addne	\base, \base, #0x10c		@ PJ1 AP INT SEL register
-	addeq	\base, \base, #0x104		@ PJ4 IRQ SEL register
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\tmp, [\base, #0]
-	and	\irqnr, \tmp, #0x3f
-	tst	\tmp, #(1 << 6)
-	.endm
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index 459c2d0..a83ba7c 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -4,6 +4,7 @@
 #include <linux/reboot.h>
 
 extern void pxa168_timer_init(void);
+extern void __init icu_init_irq(void);
 extern void __init pxa168_init_irq(void);
 extern void pxa168_restart(enum reboot_mode, const char *);
 extern void pxa168_clear_keypad_wakeup(void);
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index b914afa..9225320 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -2,6 +2,7 @@
 #define __ASM_MACH_PXA910_H
 
 extern void pxa910_timer_init(void);
+extern void __init icu_init_irq(void);
 extern void __init pxa910_init_irq(void);
 
 #include <linux/i2c.h>
diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq.c
deleted file mode 100644
index 3c71246..0000000
--- a/arch/arm/mach-mmp/irq.c
+++ /dev/null
@@ -1,463 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/irq.c
- *
- *  Generic IRQ handling, GPIO IRQ demultiplexing, etc.
- *  Copyright (C) 2008 - 2012 Marvell Technology Group Ltd.
- *
- *  Author:	Bin Yang <bin.yang@marvell.com>
- *              Haojian Zhuang <haojian.zhuang@gmail.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-
-#include <mach/irqs.h>
-
-#ifdef CONFIG_CPU_MMP2
-#include <mach/pm-mmp2.h>
-#endif
-#ifdef CONFIG_CPU_PXA910
-#include <mach/pm-pxa910.h>
-#endif
-
-#include "common.h"
-
-#define MAX_ICU_NR		16
-
-struct icu_chip_data {
-	int			nr_irqs;
-	unsigned int		virq_base;
-	unsigned int		cascade_irq;
-	void __iomem		*reg_status;
-	void __iomem		*reg_mask;
-	unsigned int		conf_enable;
-	unsigned int		conf_disable;
-	unsigned int		conf_mask;
-	unsigned int		clr_mfp_irq_base;
-	unsigned int		clr_mfp_hwirq;
-	struct irq_domain	*domain;
-};
-
-struct mmp_intc_conf {
-	unsigned int	conf_enable;
-	unsigned int	conf_disable;
-	unsigned int	conf_mask;
-};
-
-void __iomem *mmp_icu_base;
-static struct icu_chip_data icu_data[MAX_ICU_NR];
-static int max_icu_nr;
-
-extern void mmp2_clear_pmic_int(void);
-
-static void icu_mask_ack_irq(struct irq_data *d)
-{
-	struct irq_domain *domain = d->domain;
-	struct icu_chip_data *data = (struct icu_chip_data *)domain->host_data;
-	int hwirq;
-	u32 r;
-
-	hwirq = d->irq - data->virq_base;
-	if (data == &icu_data[0]) {
-		r = readl_relaxed(mmp_icu_base + (hwirq << 2));
-		r &= ~data->conf_mask;
-		r |= data->conf_disable;
-		writel_relaxed(r, mmp_icu_base + (hwirq << 2));
-	} else {
-#ifdef CONFIG_CPU_MMP2
-		if ((data->virq_base == data->clr_mfp_irq_base)
-			&& (hwirq == data->clr_mfp_hwirq))
-			mmp2_clear_pmic_int();
-#endif
-		r = readl_relaxed(data->reg_mask) | (1 << hwirq);
-		writel_relaxed(r, data->reg_mask);
-	}
-}
-
-static void icu_mask_irq(struct irq_data *d)
-{
-	struct irq_domain *domain = d->domain;
-	struct icu_chip_data *data = (struct icu_chip_data *)domain->host_data;
-	int hwirq;
-	u32 r;
-
-	hwirq = d->irq - data->virq_base;
-	if (data == &icu_data[0]) {
-		r = readl_relaxed(mmp_icu_base + (hwirq << 2));
-		r &= ~data->conf_mask;
-		r |= data->conf_disable;
-		writel_relaxed(r, mmp_icu_base + (hwirq << 2));
-	} else {
-		r = readl_relaxed(data->reg_mask) | (1 << hwirq);
-		writel_relaxed(r, data->reg_mask);
-	}
-}
-
-static void icu_unmask_irq(struct irq_data *d)
-{
-	struct irq_domain *domain = d->domain;
-	struct icu_chip_data *data = (struct icu_chip_data *)domain->host_data;
-	int hwirq;
-	u32 r;
-
-	hwirq = d->irq - data->virq_base;
-	if (data == &icu_data[0]) {
-		r = readl_relaxed(mmp_icu_base + (hwirq << 2));
-		r &= ~data->conf_mask;
-		r |= data->conf_enable;
-		writel_relaxed(r, mmp_icu_base + (hwirq << 2));
-	} else {
-		r = readl_relaxed(data->reg_mask) & ~(1 << hwirq);
-		writel_relaxed(r, data->reg_mask);
-	}
-}
-
-static struct irq_chip icu_irq_chip = {
-	.name		= "icu_irq",
-	.irq_mask	= icu_mask_irq,
-	.irq_mask_ack	= icu_mask_ack_irq,
-	.irq_unmask	= icu_unmask_irq,
-};
-
-static void icu_mux_irq_demux(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_domain *domain;
-	struct icu_chip_data *data;
-	int i;
-	unsigned long mask, status, n;
-
-	for (i = 1; i < max_icu_nr; i++) {
-		if (irq == icu_data[i].cascade_irq) {
-			domain = icu_data[i].domain;
-			data = (struct icu_chip_data *)domain->host_data;
-			break;
-		}
-	}
-	if (i >= max_icu_nr) {
-		pr_err("Spurious irq %d in MMP INTC\n", irq);
-		return;
-	}
-
-	mask = readl_relaxed(data->reg_mask);
-	while (1) {
-		status = readl_relaxed(data->reg_status) & ~mask;
-		if (status == 0)
-			break;
-		for_each_set_bit(n, &status, BITS_PER_LONG) {
-			generic_handle_irq(icu_data[i].virq_base + n);
-		}
-	}
-}
-
-static int mmp_irq_domain_map(struct irq_domain *d, unsigned int irq,
-			      irq_hw_number_t hw)
-{
-	irq_set_chip_and_handler(irq, &icu_irq_chip, handle_level_irq);
-	set_irq_flags(irq, IRQF_VALID);
-	return 0;
-}
-
-static int mmp_irq_domain_xlate(struct irq_domain *d, struct device_node *node,
-				const u32 *intspec, unsigned int intsize,
-				unsigned long *out_hwirq,
-				unsigned int *out_type)
-{
-	*out_hwirq = intspec[0];
-	return 0;
-}
-
-const struct irq_domain_ops mmp_irq_domain_ops = {
-	.map		= mmp_irq_domain_map,
-	.xlate		= mmp_irq_domain_xlate,
-};
-
-static struct mmp_intc_conf mmp_conf = {
-	.conf_enable	= 0x51,
-	.conf_disable	= 0x0,
-	.conf_mask	= 0x7f,
-};
-
-static struct mmp_intc_conf mmp2_conf = {
-	.conf_enable	= 0x20,
-	.conf_disable	= 0x0,
-	.conf_mask	= 0x7f,
-};
-
-/* MMP (ARMv5) */
-void __init icu_init_irq(void)
-{
-	int irq;
-
-	max_icu_nr = 1;
-	mmp_icu_base = ioremap(0xd4282000, 0x1000);
-	icu_data[0].conf_enable = mmp_conf.conf_enable;
-	icu_data[0].conf_disable = mmp_conf.conf_disable;
-	icu_data[0].conf_mask = mmp_conf.conf_mask;
-	icu_data[0].nr_irqs = 64;
-	icu_data[0].virq_base = 0;
-	icu_data[0].domain = irq_domain_add_legacy(NULL, 64, 0, 0,
-						   &irq_domain_simple_ops,
-						   &icu_data[0]);
-	for (irq = 0; irq < 64; irq++) {
-		icu_mask_irq(irq_get_irq_data(irq));
-		irq_set_chip_and_handler(irq, &icu_irq_chip, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-	irq_set_default_host(icu_data[0].domain);
-#ifdef CONFIG_CPU_PXA910
-	icu_irq_chip.irq_set_wake = pxa910_set_wake;
-#endif
-}
-
-/* MMP2 (ARMv7) */
-void __init mmp2_init_icu(void)
-{
-	int irq;
-
-	max_icu_nr = 8;
-	mmp_icu_base = ioremap(0xd4282000, 0x1000);
-	icu_data[0].conf_enable = mmp2_conf.conf_enable;
-	icu_data[0].conf_disable = mmp2_conf.conf_disable;
-	icu_data[0].conf_mask = mmp2_conf.conf_mask;
-	icu_data[0].nr_irqs = 64;
-	icu_data[0].virq_base = 0;
-	icu_data[0].domain = irq_domain_add_legacy(NULL, 64, 0, 0,
-						   &irq_domain_simple_ops,
-						   &icu_data[0]);
-	icu_data[1].reg_status = mmp_icu_base + 0x150;
-	icu_data[1].reg_mask = mmp_icu_base + 0x168;
-	icu_data[1].clr_mfp_irq_base = IRQ_MMP2_PMIC_BASE;
-	icu_data[1].clr_mfp_hwirq = IRQ_MMP2_PMIC - IRQ_MMP2_PMIC_BASE;
-	icu_data[1].nr_irqs = 2;
-	icu_data[1].cascade_irq = 4;
-	icu_data[1].virq_base = IRQ_MMP2_PMIC_BASE;
-	icu_data[1].domain = irq_domain_add_legacy(NULL, icu_data[1].nr_irqs,
-						   icu_data[1].virq_base, 0,
-						   &irq_domain_simple_ops,
-						   &icu_data[1]);
-	icu_data[2].reg_status = mmp_icu_base + 0x154;
-	icu_data[2].reg_mask = mmp_icu_base + 0x16c;
-	icu_data[2].nr_irqs = 2;
-	icu_data[2].cascade_irq = 5;
-	icu_data[2].virq_base = IRQ_MMP2_RTC_BASE;
-	icu_data[2].domain = irq_domain_add_legacy(NULL, icu_data[2].nr_irqs,
-						   icu_data[2].virq_base, 0,
-						   &irq_domain_simple_ops,
-						   &icu_data[2]);
-	icu_data[3].reg_status = mmp_icu_base + 0x180;
-	icu_data[3].reg_mask = mmp_icu_base + 0x17c;
-	icu_data[3].nr_irqs = 3;
-	icu_data[3].cascade_irq = 9;
-	icu_data[3].virq_base = IRQ_MMP2_KEYPAD_BASE;
-	icu_data[3].domain = irq_domain_add_legacy(NULL, icu_data[3].nr_irqs,
-						   icu_data[3].virq_base, 0,
-						   &irq_domain_simple_ops,
-						   &icu_data[3]);
-	icu_data[4].reg_status = mmp_icu_base + 0x158;
-	icu_data[4].reg_mask = mmp_icu_base + 0x170;
-	icu_data[4].nr_irqs = 5;
-	icu_data[4].cascade_irq = 17;
-	icu_data[4].virq_base = IRQ_MMP2_TWSI_BASE;
-	icu_data[4].domain = irq_domain_add_legacy(NULL, icu_data[4].nr_irqs,
-						   icu_data[4].virq_base, 0,
-						   &irq_domain_simple_ops,
-						   &icu_data[4]);
-	icu_data[5].reg_status = mmp_icu_base + 0x15c;
-	icu_data[5].reg_mask = mmp_icu_base + 0x174;
-	icu_data[5].nr_irqs = 15;
-	icu_data[5].cascade_irq = 35;
-	icu_data[5].virq_base = IRQ_MMP2_MISC_BASE;
-	icu_data[5].domain = irq_domain_add_legacy(NULL, icu_data[5].nr_irqs,
-						   icu_data[5].virq_base, 0,
-						   &irq_domain_simple_ops,
-						   &icu_data[5]);
-	icu_data[6].reg_status = mmp_icu_base + 0x160;
-	icu_data[6].reg_mask = mmp_icu_base + 0x178;
-	icu_data[6].nr_irqs = 2;
-	icu_data[6].cascade_irq = 51;
-	icu_data[6].virq_base = IRQ_MMP2_MIPI_HSI1_BASE;
-	icu_data[6].domain = irq_domain_add_legacy(NULL, icu_data[6].nr_irqs,
-						   icu_data[6].virq_base, 0,
-						   &irq_domain_simple_ops,
-						   &icu_data[6]);
-	icu_data[7].reg_status = mmp_icu_base + 0x188;
-	icu_data[7].reg_mask = mmp_icu_base + 0x184;
-	icu_data[7].nr_irqs = 2;
-	icu_data[7].cascade_irq = 55;
-	icu_data[7].virq_base = IRQ_MMP2_MIPI_HSI0_BASE;
-	icu_data[7].domain = irq_domain_add_legacy(NULL, icu_data[7].nr_irqs,
-						   icu_data[7].virq_base, 0,
-						   &irq_domain_simple_ops,
-						   &icu_data[7]);
-	for (irq = 0; irq < IRQ_MMP2_MUX_END; irq++) {
-		icu_mask_irq(irq_get_irq_data(irq));
-		switch (irq) {
-		case IRQ_MMP2_PMIC_MUX:
-		case IRQ_MMP2_RTC_MUX:
-		case IRQ_MMP2_KEYPAD_MUX:
-		case IRQ_MMP2_TWSI_MUX:
-		case IRQ_MMP2_MISC_MUX:
-		case IRQ_MMP2_MIPI_HSI1_MUX:
-		case IRQ_MMP2_MIPI_HSI0_MUX:
-			irq_set_chip(irq, &icu_irq_chip);
-			irq_set_chained_handler(irq, icu_mux_irq_demux);
-			break;
-		default:
-			irq_set_chip_and_handler(irq, &icu_irq_chip,
-						 handle_level_irq);
-			break;
-		}
-		set_irq_flags(irq, IRQF_VALID);
-	}
-	irq_set_default_host(icu_data[0].domain);
-#ifdef CONFIG_CPU_MMP2
-	icu_irq_chip.irq_set_wake = mmp2_set_wake;
-#endif
-}
-
-#ifdef CONFIG_OF
-static const struct of_device_id intc_ids[] __initconst = {
-	{ .compatible = "mrvl,mmp-intc", .data = &mmp_conf },
-	{ .compatible = "mrvl,mmp2-intc", .data = &mmp2_conf },
-	{}
-};
-
-static const struct of_device_id mmp_mux_irq_match[] __initconst = {
-	{ .compatible = "mrvl,mmp2-mux-intc" },
-	{}
-};
-
-int __init mmp2_mux_init(struct device_node *parent)
-{
-	struct device_node *node;
-	const struct of_device_id *of_id;
-	struct resource res;
-	int i, irq_base, ret, irq;
-	u32 nr_irqs, mfp_irq;
-
-	node = parent;
-	max_icu_nr = 1;
-	for (i = 1; i < MAX_ICU_NR; i++) {
-		node = of_find_matching_node(node, mmp_mux_irq_match);
-		if (!node)
-			break;
-		of_id = of_match_node(&mmp_mux_irq_match[0], node);
-		ret = of_property_read_u32(node, "mrvl,intc-nr-irqs",
-					   &nr_irqs);
-		if (ret) {
-			pr_err("Not found mrvl,intc-nr-irqs property\n");
-			ret = -EINVAL;
-			goto err;
-		}
-		ret = of_address_to_resource(node, 0, &res);
-		if (ret < 0) {
-			pr_err("Not found reg property\n");
-			ret = -EINVAL;
-			goto err;
-		}
-		icu_data[i].reg_status = mmp_icu_base + res.start;
-		ret = of_address_to_resource(node, 1, &res);
-		if (ret < 0) {
-			pr_err("Not found reg property\n");
-			ret = -EINVAL;
-			goto err;
-		}
-		icu_data[i].reg_mask = mmp_icu_base + res.start;
-		icu_data[i].cascade_irq = irq_of_parse_and_map(node, 0);
-		if (!icu_data[i].cascade_irq) {
-			ret = -EINVAL;
-			goto err;
-		}
-
-		irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0);
-		if (irq_base < 0) {
-			pr_err("Failed to allocate IRQ numbers for mux intc\n");
-			ret = irq_base;
-			goto err;
-		}
-		if (!of_property_read_u32(node, "mrvl,clr-mfp-irq",
-					  &mfp_irq)) {
-			icu_data[i].clr_mfp_irq_base = irq_base;
-			icu_data[i].clr_mfp_hwirq = mfp_irq;
-		}
-		irq_set_chained_handler(icu_data[i].cascade_irq,
-					icu_mux_irq_demux);
-		icu_data[i].nr_irqs = nr_irqs;
-		icu_data[i].virq_base = irq_base;
-		icu_data[i].domain = irq_domain_add_legacy(node, nr_irqs,
-							   irq_base, 0,
-							   &mmp_irq_domain_ops,
-							   &icu_data[i]);
-		for (irq = irq_base; irq < irq_base + nr_irqs; irq++)
-			icu_mask_irq(irq_get_irq_data(irq));
-	}
-	max_icu_nr = i;
-	return 0;
-err:
-	of_node_put(node);
-	max_icu_nr = i;
-	return ret;
-}
-
-void __init mmp_dt_irq_init(void)
-{
-	struct device_node *node;
-	const struct of_device_id *of_id;
-	struct mmp_intc_conf *conf;
-	int nr_irqs, irq_base, ret, irq;
-
-	node = of_find_matching_node(NULL, intc_ids);
-	if (!node) {
-		pr_err("Failed to find interrupt controller in arch-mmp\n");
-		return;
-	}
-	of_id = of_match_node(intc_ids, node);
-	conf = of_id->data;
-
-	ret = of_property_read_u32(node, "mrvl,intc-nr-irqs", &nr_irqs);
-	if (ret) {
-		pr_err("Not found mrvl,intc-nr-irqs property\n");
-		return;
-	}
-
-	mmp_icu_base = of_iomap(node, 0);
-	if (!mmp_icu_base) {
-		pr_err("Failed to get interrupt controller register\n");
-		return;
-	}
-
-	irq_base = irq_alloc_descs(-1, 0, nr_irqs - NR_IRQS_LEGACY, 0);
-	if (irq_base < 0) {
-		pr_err("Failed to allocate IRQ numbers\n");
-		goto err;
-	} else if (irq_base != NR_IRQS_LEGACY) {
-		pr_err("ICU's irqbase should be started from 0\n");
-		goto err;
-	}
-	icu_data[0].conf_enable = conf->conf_enable;
-	icu_data[0].conf_disable = conf->conf_disable;
-	icu_data[0].conf_mask = conf->conf_mask;
-	icu_data[0].nr_irqs = nr_irqs;
-	icu_data[0].virq_base = 0;
-	icu_data[0].domain = irq_domain_add_legacy(node, nr_irqs, 0, 0,
-						   &mmp_irq_domain_ops,
-						   &icu_data[0]);
-	irq_set_default_host(icu_data[0].domain);
-	for (irq = 0; irq < nr_irqs; irq++)
-		icu_mask_irq(irq_get_irq_data(irq));
-	mmp2_mux_init(node);
-	return;
-err:
-	iounmap(mmp_icu_base);
-}
-#endif
diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c
index b37915d..cca529c 100644
--- a/arch/arm/mach-mmp/mmp-dt.c
+++ b/arch/arm/mach-mmp/mmp-dt.c
@@ -9,17 +9,13 @@
  *  publishhed by the Free Software Foundation.
  */
 
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/of_irq.h>
+#include <linux/irqchip.h>
 #include <linux/of_platform.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
-#include <mach/irqs.h>
 
 #include "common.h"
 
-extern void __init mmp_dt_irq_init(void);
 extern void __init mmp_dt_init_timer(void);
 
 static const struct of_dev_auxdata pxa168_auxdata_lookup[] __initconst = {
@@ -64,7 +60,6 @@ static const char *mmp_dt_board_compat[] __initdata = {
 
 DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)")
 	.map_io		= mmp_map_io,
-	.init_irq	= mmp_dt_irq_init,
 	.init_time	= mmp_dt_init_timer,
 	.init_machine	= pxa168_dt_init,
 	.dt_compat	= mmp_dt_board_compat,
@@ -72,7 +67,6 @@ MACHINE_END
 
 DT_MACHINE_START(PXA910_DT, "Marvell PXA910 (Device Tree Support)")
 	.map_io		= mmp_map_io,
-	.init_irq	= mmp_dt_irq_init,
 	.init_time	= mmp_dt_init_timer,
 	.init_machine	= pxa910_dt_init,
 	.dt_compat	= mmp_dt_board_compat,
diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c
index 4ac2567..023cb45 100644
--- a/arch/arm/mach-mmp/mmp2-dt.c
+++ b/arch/arm/mach-mmp/mmp2-dt.c
@@ -10,18 +10,13 @@
  */
 
 #include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/of_irq.h>
+#include <linux/irqchip.h>
 #include <linux/of_platform.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
-#include <mach/irqs.h>
-#include <mach/regs-apbc.h>
 
 #include "common.h"
 
-extern void __init mmp_dt_irq_init(void);
 extern void __init mmp_dt_init_timer(void);
 
 static const struct of_dev_auxdata mmp2_auxdata_lookup[] __initconst = {
@@ -49,7 +44,6 @@ static const char *mmp2_dt_board_compat[] __initdata = {
 
 DT_MACHINE_START(MMP2_DT, "Marvell MMP2 (Device Tree Support)")
 	.map_io		= mmp_map_io,
-	.init_irq	= mmp_dt_irq_init,
 	.init_time	= mmp_dt_init_timer,
 	.init_machine	= mmp2_dt_init,
 	.dt_compat	= mmp2_dt_board_compat,
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index c7592f1..a70b553 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -13,6 +13,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqchip/mmp.h>
 #include <linux/platform_device.h>
 
 #include <asm/hardware/cache-tauros2.h>
@@ -26,6 +28,7 @@
 #include <mach/mfp.h>
 #include <mach/devices.h>
 #include <mach/mmp2.h>
+#include <mach/pm-mmp2.h>
 
 #include "common.h"
 
@@ -94,6 +97,9 @@ void mmp2_clear_pmic_int(void)
 void __init mmp2_init_irq(void)
 {
 	mmp2_init_icu();
+#ifdef CONFIG_PM
+	icu_irq_chip.irq_set_wake = mmp2_set_wake;
+#endif
 }
 
 static int __init mmp2_init(void)
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index ce6393a..eb57ee1 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -12,6 +12,8 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqchip/mmp.h>
 #include <linux/platform_device.h>
 
 #include <asm/hardware/cache-tauros2.h>
@@ -23,6 +25,8 @@
 #include <mach/dma.h>
 #include <mach/mfp.h>
 #include <mach/devices.h>
+#include <mach/pm-pxa910.h>
+#include <mach/pxa910.h>
 
 #include "common.h"
 
@@ -79,6 +83,9 @@ static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata =
 void __init pxa910_init_irq(void)
 {
 	icu_init_irq();
+#ifdef CONFIG_PM
+	icu_irq_chip.irq_set_wake = pxa910_set_wake;
+#endif
 }
 
 static int __init pxa910_init(void)
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index 8483906..7022329 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -15,7 +15,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/onenand.h>
 #include <linux/interrupt.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/gpio.h>
 #include <linux/gpio-pxa.h>
 #include <linux/mfd/88pm860x.h>
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 905efc8..2586c28 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -1,12 +1,12 @@
 if ARCH_MSM
 
 comment "Qualcomm MSM SoC Type"
-	depends on (ARCH_MSM8X60 || ARCH_MSM8960)
+	depends on ARCH_MSM_DT
 
 choice
 	prompt "Qualcomm MSM SoC Type"
 	default ARCH_MSM7X00A
-	depends on !(ARCH_MSM8X60 || ARCH_MSM8960)
+	depends on !ARCH_MSM_DT
 
 config ARCH_MSM7X00A
 	bool "MSM7x00A / MSM7x01A"
@@ -49,7 +49,6 @@ config ARCH_MSM8X60
 	select GPIO_MSM_V2
 	select HAVE_SMP
 	select MSM_SCM if SMP
-	select USE_OF
 
 config ARCH_MSM8960
 	bool "MSM8960"
@@ -58,6 +57,11 @@ config ARCH_MSM8960
 	select HAVE_SMP
 	select GPIO_MSM_V2
 	select MSM_SCM if SMP
+
+config ARCH_MSM_DT
+	def_bool y
+	depends on (ARCH_MSM8X60 || ARCH_MSM8960)
+	select SPARSE_IRQ
 	select USE_OF
 
 config MSM_HAS_DEBUG_UART_HS
@@ -68,6 +72,7 @@ config MSM_SOC_REV_A
 
 config  ARCH_MSM_ARM11
 	bool
+
 config  ARCH_MSM_SCORPION
 	bool
 
@@ -75,6 +80,7 @@ config  MSM_VIC
 	bool
 
 menu "Qualcomm MSM Board Type"
+	depends on !ARCH_MSM_DT
 
 config MACH_HALIBUT
 	depends on ARCH_MSM
@@ -122,6 +128,7 @@ config MSM_SMD
 
 config MSM_GPIOMUX
 	bool
+	depends on !ARCH_MSM_DT
 	help
 	  Support for MSM V1 TLMM GPIOMUX architecture.
 
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index d257ff4..7ed4c1b 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -1,17 +1,16 @@
-obj-y += io.o timer.o
+obj-y += timer.o
 obj-y += clock.o
 
 obj-$(CONFIG_MSM_VIC) += irq-vic.o
-obj-$(CONFIG_MSM_IOMMU) += devices-iommu.o
 
 obj-$(CONFIG_ARCH_MSM7X00A) += irq.o
 obj-$(CONFIG_ARCH_QSD8X50) += sirc.o
 
 obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o
 
-obj-$(CONFIG_ARCH_MSM7X00A) += dma.o
-obj-$(CONFIG_ARCH_MSM7X30) += dma.o
-obj-$(CONFIG_ARCH_QSD8X50) += dma.o
+obj-$(CONFIG_ARCH_MSM7X00A) += dma.o io.o
+obj-$(CONFIG_ARCH_MSM7X30) += dma.o io.o
+obj-$(CONFIG_ARCH_QSD8X50) += dma.o io.o
 
 obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
 obj-$(CONFIG_MSM_SMD) += last_radio_log.o
@@ -27,7 +26,6 @@ obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o b
 obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
 obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
 obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
-obj-$(CONFIG_ARCH_MSM8X60) += board-dt-8660.o
-obj-$(CONFIG_ARCH_MSM8960) += board-dt-8960.o
+obj-$(CONFIG_ARCH_MSM_DT) += board-dt.o
 obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o
 obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o
diff --git a/arch/arm/mach-msm/board-dt-8660.c b/arch/arm/mach-msm/board-dt-8660.c
deleted file mode 100644
index 492f5cd..0000000
--- a/arch/arm/mach-msm/board-dt-8660.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/* Copyright (c) 2010-2012, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-
-#include <asm/mach/arch.h>
-
-#include <mach/board.h>
-#include "common.h"
-
-static void __init msm8x60_init_late(void)
-{
-	smd_debugfs_init();
-}
-
-static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
-	{}
-};
-
-static void __init msm8x60_dt_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table,
-			msm_auxdata_lookup, NULL);
-}
-
-static const char *msm8x60_fluid_match[] __initdata = {
-	"qcom,msm8660-fluid",
-	"qcom,msm8660-surf",
-	NULL
-};
-
-DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
-	.smp = smp_ops(msm_smp_ops),
-	.map_io = msm_map_msm8x60_io,
-	.init_machine = msm8x60_dt_init,
-	.init_late = msm8x60_init_late,
-	.init_time	= msm_dt_timer_init,
-	.dt_compat = msm8x60_fluid_match,
-MACHINE_END
diff --git a/arch/arm/mach-msm/board-dt-8960.c b/arch/arm/mach-msm/board-dt.c
index bb55309..16e6183 100644
--- a/arch/arm/mach-msm/board-dt-8960.c
+++ b/arch/arm/mach-msm/board-dt.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2012, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2010-2012,2013 The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -11,26 +11,22 @@
  */
 
 #include <linux/init.h>
+#include <linux/of.h>
 #include <linux/of_platform.h>
 
 #include <asm/mach/arch.h>
+#include <asm/mach/map.h>
 
 #include "common.h"
 
-static void __init msm_dt_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char * const msm8960_dt_match[] __initconst = {
+static const char * const msm_dt_match[] __initconst = {
+	"qcom,msm8660-fluid",
+	"qcom,msm8660-surf",
 	"qcom,msm8960-cdp",
 	NULL
 };
 
-DT_MACHINE_START(MSM8960_DT, "Qualcomm MSM (Flattened Device Tree)")
+DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
 	.smp = smp_ops(msm_smp_ops),
-	.map_io = msm_map_msm8960_io,
-	.init_time	= msm_dt_timer_init,
-	.init_machine = msm_dt_init,
-	.dt_compat = msm8960_dt_match,
+	.dt_compat = msm_dt_match,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 803651a..a775298 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -29,7 +29,6 @@
 #include <asm/setup.h>
 
 #include <mach/irqs.h>
-#include <mach/board.h>
 #include <mach/msm_iomap.h>
 
 #include <linux/mtd/nand.h>
diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c
index 30c3496..7d9981c 100644
--- a/arch/arm/mach-msm/board-mahimahi.c
+++ b/arch/arm/mach-msm/board-mahimahi.c
@@ -28,12 +28,12 @@
 #include <asm/mach/map.h>
 #include <asm/setup.h>
 
-#include <mach/board.h>
 #include <mach/hardware.h>
 
 #include "board-mahimahi.h"
 #include "devices.h"
 #include "proc_comm.h"
+#include "common.h"
 
 static uint debug_uart;
 
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index db3d8c0..f9af5a4 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -30,7 +30,6 @@
 #include <asm/memory.h>
 #include <asm/setup.h>
 
-#include <mach/board.h>
 #include <mach/msm_iomap.h>
 #include <mach/dma.h>
 
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index f14a73d..5f933bc 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -28,7 +28,6 @@
 #include <asm/io.h>
 #include <asm/setup.h>
 
-#include <mach/board.h>
 #include <mach/irqs.h>
 #include <mach/sirc.h>
 #include <mach/vreg.h>
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index 7073011..3276051 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -28,7 +28,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 #include <mach/vreg.h>
-#include <mach/board.h>
 
 #include <asm/io.h>
 #include <asm/delay.h>
@@ -41,6 +40,7 @@
 #include "board-sapphire.h"
 #include "proc_comm.h"
 #include "devices.h"
+#include "common.h"
 
 void msm_init_irq(void);
 void msm_init_gpio(void);
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index 64a46eb..ccf6621 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -25,7 +25,6 @@
 #include <asm/mach/map.h>
 #include <asm/setup.h>
 
-#include <mach/board.h>
 #include <mach/hardware.h>
 #include <mach/msm_iomap.h>
 
diff --git a/arch/arm/mach-msm/board-trout.h b/arch/arm/mach-msm/board-trout.h
index 651851c..b2379ed 100644
--- a/arch/arm/mach-msm/board-trout.h
+++ b/arch/arm/mach-msm/board-trout.h
@@ -4,7 +4,7 @@
 #ifndef __ARCH_ARM_MACH_MSM_BOARD_TROUT_H
 #define __ARCH_ARM_MACH_MSM_BOARD_TROUT_H
 
-#include <mach/board.h>
+#include "common.h"
 
 #define MSM_SMI_BASE		0x00000000
 #define MSM_SMI_SIZE		0x00800000
diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h
index 421cf77..33c7725 100644
--- a/arch/arm/mach-msm/common.h
+++ b/arch/arm/mach-msm/common.h
@@ -14,13 +14,10 @@
 
 extern void msm7x01_timer_init(void);
 extern void msm7x30_timer_init(void);
-extern void msm_dt_timer_init(void);
 extern void qsd8x50_timer_init(void);
 
 extern void msm_map_common_io(void);
 extern void msm_map_msm7x30_io(void);
-extern void msm_map_msm8x60_io(void);
-extern void msm_map_msm8960_io(void);
 extern void msm_map_qsd8x50_io(void);
 
 extern void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size,
@@ -29,4 +26,19 @@ extern void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size,
 extern struct smp_operations msm_smp_ops;
 extern void msm_cpu_die(unsigned int cpu);
 
+struct msm_mmc_platform_data;
+
+extern void msm_add_devices(void);
+extern void msm_init_irq(void);
+extern void msm_init_gpio(void);
+extern int msm_add_sdcc(unsigned int controller,
+			struct msm_mmc_platform_data *plat,
+			unsigned int stat_irq, unsigned long stat_irq_flags);
+
+#if defined(CONFIG_MSM_SMD) && defined(CONFIG_DEBUG_FS)
+extern int smd_debugfs_init(void);
+#else
+static inline int smd_debugfs_init(void) { return 0; }
+#endif
+
 #endif
diff --git a/arch/arm/mach-msm/devices-iommu.c b/arch/arm/mach-msm/devices-iommu.c
deleted file mode 100644
index 0fb7a17..0000000
--- a/arch/arm/mach-msm/devices-iommu.c
+++ /dev/null
@@ -1,912 +0,0 @@
-/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/bootmem.h>
-#include <linux/module.h>
-#include <mach/irqs.h>
-#include <mach/iommu.h>
-
-static struct resource msm_iommu_jpegd_resources[] = {
-	{
-		.start = 0x07300000,
-		.end   = 0x07300000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_JPEGD_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_JPEGD_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_JPEGD_CB_SC_SECURE_IRQ,
-		.end   = SMMU_JPEGD_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_vpe_resources[] = {
-	{
-		.start = 0x07400000,
-		.end   = 0x07400000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_VPE_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_VPE_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_VPE_CB_SC_SECURE_IRQ,
-		.end   = SMMU_VPE_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_mdp0_resources[] = {
-	{
-		.start = 0x07500000,
-		.end   = 0x07500000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_MDP0_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_MDP0_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_MDP0_CB_SC_SECURE_IRQ,
-		.end   = SMMU_MDP0_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_mdp1_resources[] = {
-	{
-		.start = 0x07600000,
-		.end   = 0x07600000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_MDP1_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_MDP1_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_MDP1_CB_SC_SECURE_IRQ,
-		.end   = SMMU_MDP1_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_rot_resources[] = {
-	{
-		.start = 0x07700000,
-		.end   = 0x07700000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_ROT_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_ROT_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_ROT_CB_SC_SECURE_IRQ,
-		.end   = SMMU_ROT_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_ijpeg_resources[] = {
-	{
-		.start = 0x07800000,
-		.end   = 0x07800000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_IJPEG_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_IJPEG_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_IJPEG_CB_SC_SECURE_IRQ,
-		.end   = SMMU_IJPEG_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_vfe_resources[] = {
-	{
-		.start = 0x07900000,
-		.end   = 0x07900000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_VFE_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_VFE_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_VFE_CB_SC_SECURE_IRQ,
-		.end   = SMMU_VFE_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_vcodec_a_resources[] = {
-	{
-		.start = 0x07A00000,
-		.end   = 0x07A00000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_VCODEC_A_CB_SC_SECURE_IRQ,
-		.end   = SMMU_VCODEC_A_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_vcodec_b_resources[] = {
-	{
-		.start = 0x07B00000,
-		.end   = 0x07B00000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_VCODEC_B_CB_SC_SECURE_IRQ,
-		.end   = SMMU_VCODEC_B_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_gfx3d_resources[] = {
-	{
-		.start = 0x07C00000,
-		.end   = 0x07C00000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_GFX3D_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_GFX3D_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_GFX3D_CB_SC_SECURE_IRQ,
-		.end   = SMMU_GFX3D_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_gfx2d0_resources[] = {
-	{
-		.start = 0x07D00000,
-		.end   = 0x07D00000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_GFX2D0_CB_SC_SECURE_IRQ,
-		.end   = SMMU_GFX2D0_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_gfx2d1_resources[] = {
-	{
-		.start = 0x07E00000,
-		.end   = 0x07E00000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_GFX2D1_CB_SC_SECURE_IRQ,
-		.end   = SMMU_GFX2D1_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device msm_root_iommu_dev = {
-	.name = "msm_iommu",
-	.id = -1,
-};
-
-static struct msm_iommu_dev jpegd_iommu = {
-	.name = "jpegd",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev vpe_iommu = {
-	.name = "vpe",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev mdp0_iommu = {
-	.name = "mdp0",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev mdp1_iommu = {
-	.name = "mdp1",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev rot_iommu = {
-	.name = "rot",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev ijpeg_iommu = {
-	.name = "ijpeg",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev vfe_iommu = {
-	.name = "vfe",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev vcodec_a_iommu = {
-	.name = "vcodec_a",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev vcodec_b_iommu = {
-	.name = "vcodec_b",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev gfx3d_iommu = {
-	.name = "gfx3d",
-	.ncb = 3,
-};
-
-static struct msm_iommu_dev gfx2d0_iommu = {
-	.name = "gfx2d0",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev gfx2d1_iommu = {
-	.name = "gfx2d1",
-	.ncb = 2,
-};
-
-static struct platform_device msm_device_iommu_jpegd = {
-	.name = "msm_iommu",
-	.id = 0,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_jpegd_resources),
-	.resource = msm_iommu_jpegd_resources,
-};
-
-static struct platform_device msm_device_iommu_vpe = {
-	.name = "msm_iommu",
-	.id = 1,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_vpe_resources),
-	.resource = msm_iommu_vpe_resources,
-};
-
-static struct platform_device msm_device_iommu_mdp0 = {
-	.name = "msm_iommu",
-	.id = 2,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_mdp0_resources),
-	.resource = msm_iommu_mdp0_resources,
-};
-
-static struct platform_device msm_device_iommu_mdp1 = {
-	.name = "msm_iommu",
-	.id = 3,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_mdp1_resources),
-	.resource = msm_iommu_mdp1_resources,
-};
-
-static struct platform_device msm_device_iommu_rot = {
-	.name = "msm_iommu",
-	.id = 4,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_rot_resources),
-	.resource = msm_iommu_rot_resources,
-};
-
-static struct platform_device msm_device_iommu_ijpeg = {
-	.name = "msm_iommu",
-	.id = 5,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_ijpeg_resources),
-	.resource = msm_iommu_ijpeg_resources,
-};
-
-static struct platform_device msm_device_iommu_vfe = {
-	.name = "msm_iommu",
-	.id = 6,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_vfe_resources),
-	.resource = msm_iommu_vfe_resources,
-};
-
-static struct platform_device msm_device_iommu_vcodec_a = {
-	.name = "msm_iommu",
-	.id = 7,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_vcodec_a_resources),
-	.resource = msm_iommu_vcodec_a_resources,
-};
-
-static struct platform_device msm_device_iommu_vcodec_b = {
-	.name = "msm_iommu",
-	.id = 8,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_vcodec_b_resources),
-	.resource = msm_iommu_vcodec_b_resources,
-};
-
-static struct platform_device msm_device_iommu_gfx3d = {
-	.name = "msm_iommu",
-	.id = 9,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_gfx3d_resources),
-	.resource = msm_iommu_gfx3d_resources,
-};
-
-static struct platform_device msm_device_iommu_gfx2d0 = {
-	.name = "msm_iommu",
-	.id = 10,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_gfx2d0_resources),
-	.resource = msm_iommu_gfx2d0_resources,
-};
-
-struct platform_device msm_device_iommu_gfx2d1 = {
-	.name = "msm_iommu",
-	.id = 11,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_gfx2d1_resources),
-	.resource = msm_iommu_gfx2d1_resources,
-};
-
-static struct msm_iommu_ctx_dev jpegd_src_ctx = {
-	.name = "jpegd_src",
-	.num = 0,
-	.mids = {0, -1}
-};
-
-static struct msm_iommu_ctx_dev jpegd_dst_ctx = {
-	.name = "jpegd_dst",
-	.num = 1,
-	.mids = {1, -1}
-};
-
-static struct msm_iommu_ctx_dev vpe_src_ctx = {
-	.name = "vpe_src",
-	.num = 0,
-	.mids = {0, -1}
-};
-
-static struct msm_iommu_ctx_dev vpe_dst_ctx = {
-	.name = "vpe_dst",
-	.num = 1,
-	.mids = {1, -1}
-};
-
-static struct msm_iommu_ctx_dev mdp_vg1_ctx = {
-	.name = "mdp_vg1",
-	.num = 0,
-	.mids = {0, 2, -1}
-};
-
-static struct msm_iommu_ctx_dev mdp_rgb1_ctx = {
-	.name = "mdp_rgb1",
-	.num = 1,
-	.mids = {1, 3, 4, 5, 6, 7, 8, 9, 10, -1}
-};
-
-static struct msm_iommu_ctx_dev mdp_vg2_ctx = {
-	.name = "mdp_vg2",
-	.num = 0,
-	.mids = {0, 2, -1}
-};
-
-static struct msm_iommu_ctx_dev mdp_rgb2_ctx = {
-	.name = "mdp_rgb2",
-	.num = 1,
-	.mids = {1, 3, 4, 5, 6, 7, 8, 9, 10, -1}
-};
-
-static struct msm_iommu_ctx_dev rot_src_ctx = {
-	.name = "rot_src",
-	.num = 0,
-	.mids = {0, -1}
-};
-
-static struct msm_iommu_ctx_dev rot_dst_ctx = {
-	.name = "rot_dst",
-	.num = 1,
-	.mids = {1, -1}
-};
-
-static struct msm_iommu_ctx_dev ijpeg_src_ctx = {
-	.name = "ijpeg_src",
-	.num = 0,
-	.mids = {0, -1}
-};
-
-static struct msm_iommu_ctx_dev ijpeg_dst_ctx = {
-	.name = "ijpeg_dst",
-	.num = 1,
-	.mids = {1, -1}
-};
-
-static struct msm_iommu_ctx_dev vfe_imgwr_ctx = {
-	.name = "vfe_imgwr",
-	.num = 0,
-	.mids = {2, 3, 4, 5, 6, 7, 8, -1}
-};
-
-static struct msm_iommu_ctx_dev vfe_misc_ctx = {
-	.name = "vfe_misc",
-	.num = 1,
-	.mids = {0, 1, 9, -1}
-};
-
-static struct msm_iommu_ctx_dev vcodec_a_stream_ctx = {
-	.name = "vcodec_a_stream",
-	.num = 0,
-	.mids = {2, 5, -1}
-};
-
-static struct msm_iommu_ctx_dev vcodec_a_mm1_ctx = {
-	.name = "vcodec_a_mm1",
-	.num = 1,
-	.mids = {0, 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1}
-};
-
-static struct msm_iommu_ctx_dev vcodec_b_mm2_ctx = {
-	.name = "vcodec_b_mm2",
-	.num = 0,
-	.mids = {0, 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1}
-};
-
-static struct msm_iommu_ctx_dev gfx3d_user_ctx = {
-	.name = "gfx3d_user",
-	.num = 0,
-	.mids = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1}
-};
-
-static struct msm_iommu_ctx_dev gfx3d_priv_ctx = {
-	.name = "gfx3d_priv",
-	.num = 1,
-	.mids = {16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30,
-		 31, -1}
-};
-
-static struct msm_iommu_ctx_dev gfx2d0_2d0_ctx = {
-	.name = "gfx2d0_2d0",
-	.num = 0,
-	.mids = {0, 1, 2, 3, 4, 5, 6, 7, -1}
-};
-
-static struct msm_iommu_ctx_dev gfx2d1_2d1_ctx = {
-	.name = "gfx2d1_2d1",
-	.num = 0,
-	.mids = {0, 1, 2, 3, 4, 5, 6, 7, -1}
-};
-
-static struct platform_device msm_device_jpegd_src_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 0,
-	.dev = {
-		.parent = &msm_device_iommu_jpegd.dev,
-	},
-};
-
-static struct platform_device msm_device_jpegd_dst_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 1,
-	.dev = {
-		.parent = &msm_device_iommu_jpegd.dev,
-	},
-};
-
-static struct platform_device msm_device_vpe_src_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 2,
-	.dev = {
-		.parent = &msm_device_iommu_vpe.dev,
-	},
-};
-
-static struct platform_device msm_device_vpe_dst_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 3,
-	.dev = {
-		.parent = &msm_device_iommu_vpe.dev,
-	},
-};
-
-static struct platform_device msm_device_mdp_vg1_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 4,
-	.dev = {
-		.parent = &msm_device_iommu_mdp0.dev,
-	},
-};
-
-static struct platform_device msm_device_mdp_rgb1_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 5,
-	.dev = {
-		.parent = &msm_device_iommu_mdp0.dev,
-	},
-};
-
-static struct platform_device msm_device_mdp_vg2_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 6,
-	.dev = {
-		.parent = &msm_device_iommu_mdp1.dev,
-	},
-};
-
-static struct platform_device msm_device_mdp_rgb2_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 7,
-	.dev = {
-		.parent = &msm_device_iommu_mdp1.dev,
-	},
-};
-
-static struct platform_device msm_device_rot_src_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 8,
-	.dev = {
-		.parent = &msm_device_iommu_rot.dev,
-	},
-};
-
-static struct platform_device msm_device_rot_dst_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 9,
-	.dev = {
-		.parent = &msm_device_iommu_rot.dev,
-	},
-};
-
-static struct platform_device msm_device_ijpeg_src_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 10,
-	.dev = {
-		.parent = &msm_device_iommu_ijpeg.dev,
-	},
-};
-
-static struct platform_device msm_device_ijpeg_dst_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 11,
-	.dev = {
-		.parent = &msm_device_iommu_ijpeg.dev,
-	},
-};
-
-static struct platform_device msm_device_vfe_imgwr_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 12,
-	.dev = {
-		.parent = &msm_device_iommu_vfe.dev,
-	},
-};
-
-static struct platform_device msm_device_vfe_misc_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 13,
-	.dev = {
-		.parent = &msm_device_iommu_vfe.dev,
-	},
-};
-
-static struct platform_device msm_device_vcodec_a_stream_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 14,
-	.dev = {
-		.parent = &msm_device_iommu_vcodec_a.dev,
-	},
-};
-
-static struct platform_device msm_device_vcodec_a_mm1_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 15,
-	.dev = {
-		.parent = &msm_device_iommu_vcodec_a.dev,
-	},
-};
-
-static struct platform_device msm_device_vcodec_b_mm2_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 16,
-	.dev = {
-		.parent = &msm_device_iommu_vcodec_b.dev,
-	},
-};
-
-static struct platform_device msm_device_gfx3d_user_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 17,
-	.dev = {
-		.parent = &msm_device_iommu_gfx3d.dev,
-	},
-};
-
-static struct platform_device msm_device_gfx3d_priv_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 18,
-	.dev = {
-		.parent = &msm_device_iommu_gfx3d.dev,
-	},
-};
-
-static struct platform_device msm_device_gfx2d0_2d0_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 19,
-	.dev = {
-		.parent = &msm_device_iommu_gfx2d0.dev,
-	},
-};
-
-static struct platform_device msm_device_gfx2d1_2d1_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 20,
-	.dev = {
-		.parent = &msm_device_iommu_gfx2d1.dev,
-	},
-};
-
-static struct platform_device *msm_iommu_devs[] = {
-	&msm_device_iommu_jpegd,
-	&msm_device_iommu_vpe,
-	&msm_device_iommu_mdp0,
-	&msm_device_iommu_mdp1,
-	&msm_device_iommu_rot,
-	&msm_device_iommu_ijpeg,
-	&msm_device_iommu_vfe,
-	&msm_device_iommu_vcodec_a,
-	&msm_device_iommu_vcodec_b,
-	&msm_device_iommu_gfx3d,
-	&msm_device_iommu_gfx2d0,
-	&msm_device_iommu_gfx2d1,
-};
-
-static struct msm_iommu_dev *msm_iommu_data[] = {
-	&jpegd_iommu,
-	&vpe_iommu,
-	&mdp0_iommu,
-	&mdp1_iommu,
-	&rot_iommu,
-	&ijpeg_iommu,
-	&vfe_iommu,
-	&vcodec_a_iommu,
-	&vcodec_b_iommu,
-	&gfx3d_iommu,
-	&gfx2d0_iommu,
-	&gfx2d1_iommu,
-};
-
-static struct platform_device *msm_iommu_ctx_devs[] = {
-	&msm_device_jpegd_src_ctx,
-	&msm_device_jpegd_dst_ctx,
-	&msm_device_vpe_src_ctx,
-	&msm_device_vpe_dst_ctx,
-	&msm_device_mdp_vg1_ctx,
-	&msm_device_mdp_rgb1_ctx,
-	&msm_device_mdp_vg2_ctx,
-	&msm_device_mdp_rgb2_ctx,
-	&msm_device_rot_src_ctx,
-	&msm_device_rot_dst_ctx,
-	&msm_device_ijpeg_src_ctx,
-	&msm_device_ijpeg_dst_ctx,
-	&msm_device_vfe_imgwr_ctx,
-	&msm_device_vfe_misc_ctx,
-	&msm_device_vcodec_a_stream_ctx,
-	&msm_device_vcodec_a_mm1_ctx,
-	&msm_device_vcodec_b_mm2_ctx,
-	&msm_device_gfx3d_user_ctx,
-	&msm_device_gfx3d_priv_ctx,
-	&msm_device_gfx2d0_2d0_ctx,
-	&msm_device_gfx2d1_2d1_ctx,
-};
-
-static struct msm_iommu_ctx_dev *msm_iommu_ctx_data[] = {
-	&jpegd_src_ctx,
-	&jpegd_dst_ctx,
-	&vpe_src_ctx,
-	&vpe_dst_ctx,
-	&mdp_vg1_ctx,
-	&mdp_rgb1_ctx,
-	&mdp_vg2_ctx,
-	&mdp_rgb2_ctx,
-	&rot_src_ctx,
-	&rot_dst_ctx,
-	&ijpeg_src_ctx,
-	&ijpeg_dst_ctx,
-	&vfe_imgwr_ctx,
-	&vfe_misc_ctx,
-	&vcodec_a_stream_ctx,
-	&vcodec_a_mm1_ctx,
-	&vcodec_b_mm2_ctx,
-	&gfx3d_user_ctx,
-	&gfx3d_priv_ctx,
-	&gfx2d0_2d0_ctx,
-	&gfx2d1_2d1_ctx,
-};
-
-static int __init msm8x60_iommu_init(void)
-{
-	int ret, i;
-
-	ret = platform_device_register(&msm_root_iommu_dev);
-	if (ret != 0) {
-		pr_err("Failed to register root IOMMU device!\n");
-		goto failure;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(msm_iommu_devs); i++) {
-		ret = platform_device_add_data(msm_iommu_devs[i],
-					       msm_iommu_data[i],
-					       sizeof(struct msm_iommu_dev));
-		if (ret != 0) {
-			pr_err("platform_device_add_data failed, "
-			       "i = %d\n", i);
-			goto failure_unwind;
-		}
-
-		ret = platform_device_register(msm_iommu_devs[i]);
-
-		if (ret != 0) {
-			pr_err("platform_device_register iommu failed, "
-			       "i = %d\n", i);
-			goto failure_unwind;
-		}
-	}
-
-	for (i = 0; i < ARRAY_SIZE(msm_iommu_ctx_devs); i++) {
-		ret = platform_device_add_data(msm_iommu_ctx_devs[i],
-					       msm_iommu_ctx_data[i],
-					       sizeof(*msm_iommu_ctx_devs[i]));
-		if (ret != 0) {
-			pr_err("platform_device_add_data iommu failed, "
-			       "i = %d\n", i);
-			goto failure_unwind2;
-		}
-
-		ret = platform_device_register(msm_iommu_ctx_devs[i]);
-		if (ret != 0) {
-			pr_err("platform_device_register ctx failed, "
-			       "i = %d\n", i);
-			goto failure_unwind2;
-		}
-	}
-	return 0;
-
-failure_unwind2:
-	while (--i >= 0)
-		platform_device_unregister(msm_iommu_ctx_devs[i]);
-failure_unwind:
-	while (--i >= 0)
-		platform_device_unregister(msm_iommu_devs[i]);
-
-	platform_device_unregister(&msm_root_iommu_dev);
-failure:
-	return ret;
-}
-
-static void __exit msm8x60_iommu_exit(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(msm_iommu_ctx_devs); i++)
-		platform_device_unregister(msm_iommu_ctx_devs[i]);
-
-	for (i = 0; i < ARRAY_SIZE(msm_iommu_devs); ++i)
-		platform_device_unregister(msm_iommu_devs[i]);
-
-	platform_device_unregister(&msm_root_iommu_dev);
-}
-
-subsys_initcall(msm8x60_iommu_init);
-module_exit(msm8x60_iommu_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Stepan Moskovchenko <stepanm@codeaurora.org>");
diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c
index 6d50fb9..d83404d 100644
--- a/arch/arm/mach-msm/devices-msm7x00.c
+++ b/arch/arm/mach-msm/devices-msm7x00.c
@@ -456,9 +456,9 @@ static struct clk_pcom_desc msm_clocks_7x01a[] = {
 	CLK_PCOM("tsif_ref_clk",	TSIF_REF_CLK,	NULL, 0),
 	CLK_PCOM("tv_dac_clk",	TV_DAC_CLK,	NULL, 0),
 	CLK_PCOM("tv_enc_clk",	TV_ENC_CLK,	NULL, 0),
-	CLK_PCOM("uart_clk",	UART1_CLK,	"msm_serial.0", OFF),
-	CLK_PCOM("uart_clk",	UART2_CLK,	"msm_serial.1", 0),
-	CLK_PCOM("uart_clk",	UART3_CLK,	"msm_serial.2", OFF),
+	CLK_PCOM("core",	UART1_CLK,	"msm_serial.0", OFF),
+	CLK_PCOM("core",	UART2_CLK,	"msm_serial.1", 0),
+	CLK_PCOM("core",	UART3_CLK,	"msm_serial.2", OFF),
 	CLK_PCOM("uart1dm_clk",	UART1DM_CLK,	NULL, OFF),
 	CLK_PCOM("uart2dm_clk",	UART2DM_CLK,	NULL, 0),
 	CLK_PCOM("usb_hs_clk",	USB_HS_CLK,	"msm_hsusb", OFF),
diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c
index d4db75a..c15ea8a 100644
--- a/arch/arm/mach-msm/devices-msm7x30.c
+++ b/arch/arm/mach-msm/devices-msm7x30.c
@@ -21,10 +21,10 @@
 #include <mach/irqs.h>
 #include <mach/msm_iomap.h>
 #include <mach/dma.h>
-#include <mach/board.h>
 
 #include "devices.h"
 #include "smd_private.h"
+#include "common.h"
 
 #include <asm/mach/flash.h>
 
@@ -211,7 +211,7 @@ static struct clk_pcom_desc msm_clocks_7x30[] = {
 	CLK_PCOM("spi_pclk",	SPI_P_CLK,	NULL, 0),
 	CLK_PCOM("tv_dac_clk",	TV_DAC_CLK,	NULL, 0),
 	CLK_PCOM("tv_enc_clk",	TV_ENC_CLK,	NULL, 0),
-	CLK_PCOM("uart_clk",	UART2_CLK,	"msm_serial.1", 0),
+	CLK_PCOM("core",	UART2_CLK,	"msm_serial.1", 0),
 	CLK_PCOM("usb_phy_clk",	USB_PHY_CLK,	NULL, 0),
 	CLK_PCOM("usb_hs_clk",		USB_HS_CLK,		NULL, OFF),
 	CLK_PCOM("usb_hs_pclk",		USB_HS_P_CLK,		NULL, OFF),
diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c
index f551811..9e1e9ce 100644
--- a/arch/arm/mach-msm/devices-qsd8x50.c
+++ b/arch/arm/mach-msm/devices-qsd8x50.c
@@ -21,9 +21,9 @@
 #include <mach/irqs.h>
 #include <mach/msm_iomap.h>
 #include <mach/dma.h>
-#include <mach/board.h>
 
 #include "devices.h"
+#include "common.h"
 
 #include <asm/mach/flash.h>
 
@@ -358,9 +358,9 @@ static struct clk_pcom_desc msm_clocks_8x50[] = {
 	CLK_PCOM("tsif_ref_clk",	TSIF_REF_CLK,	NULL, 0),
 	CLK_PCOM("tv_dac_clk",	TV_DAC_CLK,	NULL, 0),
 	CLK_PCOM("tv_enc_clk",	TV_ENC_CLK,	NULL, 0),
-	CLK_PCOM("uart_clk",	UART1_CLK,	NULL, OFF),
-	CLK_PCOM("uart_clk",	UART2_CLK,	NULL, 0),
-	CLK_PCOM("uart_clk",	UART3_CLK,	"msm_serial.2", OFF),
+	CLK_PCOM("core",	UART1_CLK,	NULL, OFF),
+	CLK_PCOM("core",	UART2_CLK,	NULL, 0),
+	CLK_PCOM("core",	UART3_CLK,	"msm_serial.2", OFF),
 	CLK_PCOM("uartdm_clk",	UART1DM_CLK,	NULL, OFF),
 	CLK_PCOM("uartdm_clk",	UART2DM_CLK,	NULL, 0),
 	CLK_PCOM("usb_hs_clk",	USB_HS_CLK,	NULL, OFF),
diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h
deleted file mode 100644
index c34e246..0000000
--- a/arch/arm/mach-msm/include/mach/board.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* arch/arm/mach-msm/include/mach/board.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_BOARD_H
-#define __ASM_ARCH_MSM_BOARD_H
-
-#include <linux/types.h>
-#include <linux/platform_data/mmc-msm_sdcc.h>
-
-/* common init routines for use by arch/arm/mach-msm/board-*.c */
-
-void __init msm_add_devices(void);
-void __init msm_init_irq(void);
-void __init msm_init_gpio(void);
-int __init msm_add_sdcc(unsigned int controller,
-			struct msm_mmc_platform_data *plat,
-			unsigned int stat_irq, unsigned long stat_irq_flags);
-
-#if defined(CONFIG_MSM_SMD) && defined(CONFIG_DEBUG_FS)
-int smd_debugfs_init(void);
-#else
-static inline int smd_debugfs_init(void) { return 0; }
-#endif
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/iommu.h b/arch/arm/mach-msm/include/mach/iommu.h
deleted file mode 100644
index 5c7c955..0000000
--- a/arch/arm/mach-msm/include/mach/iommu.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#ifndef MSM_IOMMU_H
-#define MSM_IOMMU_H
-
-#include <linux/interrupt.h>
-#include <linux/clk.h>
-
-/* Sharability attributes of MSM IOMMU mappings */
-#define MSM_IOMMU_ATTR_NON_SH		0x0
-#define MSM_IOMMU_ATTR_SH		0x4
-
-/* Cacheability attributes of MSM IOMMU mappings */
-#define MSM_IOMMU_ATTR_NONCACHED	0x0
-#define MSM_IOMMU_ATTR_CACHED_WB_WA	0x1
-#define MSM_IOMMU_ATTR_CACHED_WB_NWA	0x2
-#define MSM_IOMMU_ATTR_CACHED_WT	0x3
-
-/* Mask for the cache policy attribute */
-#define MSM_IOMMU_CP_MASK		0x03
-
-/* Maximum number of Machine IDs that we are allowing to be mapped to the same
- * context bank. The number of MIDs mapped to the same CB does not affect
- * performance, but there is a practical limit on how many distinct MIDs may
- * be present. These mappings are typically determined at design time and are
- * not expected to change at run time.
- */
-#define MAX_NUM_MIDS	32
-
-/**
- * struct msm_iommu_dev - a single IOMMU hardware instance
- * name		Human-readable name given to this IOMMU HW instance
- * ncb		Number of context banks present on this IOMMU HW instance
- */
-struct msm_iommu_dev {
-	const char *name;
-	int ncb;
-};
-
-/**
- * struct msm_iommu_ctx_dev - an IOMMU context bank instance
- * name		Human-readable name given to this context bank
- * num		Index of this context bank within the hardware
- * mids		List of Machine IDs that are to be mapped into this context
- *		bank, terminated by -1. The MID is a set of signals on the
- *		AXI bus that identifies the function associated with a specific
- *		memory request. (See ARM spec).
- */
-struct msm_iommu_ctx_dev {
-	const char *name;
-	int num;
-	int mids[MAX_NUM_MIDS];
-};
-
-
-/**
- * struct msm_iommu_drvdata - A single IOMMU hardware instance
- * @base:	IOMMU config port base address (VA)
- * @ncb		The number of contexts on this IOMMU
- * @irq:	Interrupt number
- * @clk:	The bus clock for this IOMMU hardware instance
- * @pclk:	The clock for the IOMMU bus interconnect
- *
- * A msm_iommu_drvdata holds the global driver data about a single piece
- * of an IOMMU hardware instance.
- */
-struct msm_iommu_drvdata {
-	void __iomem *base;
-	int irq;
-	int ncb;
-	struct clk *clk;
-	struct clk *pclk;
-};
-
-/**
- * struct msm_iommu_ctx_drvdata - an IOMMU context bank instance
- * @num:		Hardware context number of this context
- * @pdev:		Platform device associated wit this HW instance
- * @attached_elm:	List element for domains to track which devices are
- *			attached to them
- *
- * A msm_iommu_ctx_drvdata holds the driver data for a single context bank
- * within each IOMMU hardware instance
- */
-struct msm_iommu_ctx_drvdata {
-	int num;
-	struct platform_device *pdev;
-	struct list_head attached_elm;
-};
-
-/*
- * Look up an IOMMU context device by its context name. NULL if none found.
- * Useful for testing and drivers that do not yet fully have IOMMU stuff in
- * their platform devices.
- */
-struct device *msm_iommu_get_ctx(const char *ctx_name);
-
-/*
- * Interrupt handler for the IOMMU context fault interrupt. Hooking the
- * interrupt is not supported in the API yet, but this will print an error
- * message and dump useful IOMMU registers.
- */
-irqreturn_t msm_iommu_fault_handler(int irq, void *dev_id);
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h b/arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h
deleted file mode 100644
index fc16010..0000000
--- a/arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h
+++ /dev/null
@@ -1,1865 +0,0 @@
-/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#ifndef __ARCH_ARM_MACH_MSM_IOMMU_HW_8XXX_H
-#define __ARCH_ARM_MACH_MSM_IOMMU_HW_8XXX_H
-
-#define CTX_SHIFT 12
-
-#define GET_GLOBAL_REG(reg, base) (readl((base) + (reg)))
-#define GET_CTX_REG(reg, base, ctx) \
-				(readl((base) + (reg) + ((ctx) << CTX_SHIFT)))
-
-#define SET_GLOBAL_REG(reg, base, val)	writel((val), ((base) + (reg)))
-
-#define SET_CTX_REG(reg, base, ctx, val) \
-			writel((val), ((base) + (reg) + ((ctx) << CTX_SHIFT)))
-
-/* Wrappers for numbered registers */
-#define SET_GLOBAL_REG_N(b, n, r, v) SET_GLOBAL_REG(b, ((r) + (n << 2)), (v))
-#define GET_GLOBAL_REG_N(b, n, r)    GET_GLOBAL_REG(b, ((r) + (n << 2)))
-
-/* Field wrappers */
-#define GET_GLOBAL_FIELD(b, r, F)    GET_FIELD(((b) + (r)), F##_MASK, F##_SHIFT)
-#define GET_CONTEXT_FIELD(b, c, r, F)	\
-	GET_FIELD(((b) + (r) + ((c) << CTX_SHIFT)), F##_MASK, F##_SHIFT)
-
-#define SET_GLOBAL_FIELD(b, r, F, v) \
-	SET_FIELD(((b) + (r)), F##_MASK, F##_SHIFT, (v))
-#define SET_CONTEXT_FIELD(b, c, r, F, v)	\
-	SET_FIELD(((b) + (r) + ((c) << CTX_SHIFT)), F##_MASK, F##_SHIFT, (v))
-
-#define GET_FIELD(addr, mask, shift)  ((readl(addr) >> (shift)) & (mask))
-
-#define SET_FIELD(addr, mask, shift, v) \
-do { \
-	int t = readl(addr); \
-	writel((t & ~((mask) << (shift))) + (((v) & (mask)) << (shift)), addr);\
-} while (0)
-
-
-#define NUM_FL_PTE	4096
-#define NUM_SL_PTE	256
-#define NUM_TEX_CLASS	8
-
-/* First-level page table bits */
-#define FL_BASE_MASK		0xFFFFFC00
-#define FL_TYPE_TABLE		(1 << 0)
-#define FL_TYPE_SECT		(2 << 0)
-#define FL_SUPERSECTION		(1 << 18)
-#define FL_AP_WRITE		(1 << 10)
-#define FL_AP_READ		(1 << 11)
-#define FL_SHARED		(1 << 16)
-#define FL_BUFFERABLE		(1 << 2)
-#define FL_CACHEABLE		(1 << 3)
-#define FL_TEX0			(1 << 12)
-#define FL_OFFSET(va)		(((va) & 0xFFF00000) >> 20)
-#define FL_NG			(1 << 17)
-
-/* Second-level page table bits */
-#define SL_BASE_MASK_LARGE	0xFFFF0000
-#define SL_BASE_MASK_SMALL	0xFFFFF000
-#define SL_TYPE_LARGE		(1 << 0)
-#define SL_TYPE_SMALL		(2 << 0)
-#define SL_AP0			(1 << 4)
-#define SL_AP1			(2 << 4)
-#define SL_SHARED		(1 << 10)
-#define SL_BUFFERABLE		(1 << 2)
-#define SL_CACHEABLE		(1 << 3)
-#define SL_TEX0			(1 << 6)
-#define SL_OFFSET(va)		(((va) & 0xFF000) >> 12)
-#define SL_NG			(1 << 11)
-
-/* Memory type and cache policy attributes */
-#define MT_SO			0
-#define MT_DEV			1
-#define MT_NORMAL		2
-#define CP_NONCACHED		0
-#define CP_WB_WA		1
-#define CP_WT			2
-#define CP_WB_NWA		3
-
-/* Global register setters / getters */
-#define SET_M2VCBR_N(b, N, v)	 SET_GLOBAL_REG_N(M2VCBR_N, N, (b), (v))
-#define SET_CBACR_N(b, N, v)	 SET_GLOBAL_REG_N(CBACR_N, N, (b), (v))
-#define SET_TLBRSW(b, v)	 SET_GLOBAL_REG(TLBRSW, (b), (v))
-#define SET_TLBTR0(b, v)	 SET_GLOBAL_REG(TLBTR0, (b), (v))
-#define SET_TLBTR1(b, v)	 SET_GLOBAL_REG(TLBTR1, (b), (v))
-#define SET_TLBTR2(b, v)	 SET_GLOBAL_REG(TLBTR2, (b), (v))
-#define SET_TESTBUSCR(b, v)	 SET_GLOBAL_REG(TESTBUSCR, (b), (v))
-#define SET_GLOBAL_TLBIALL(b, v) SET_GLOBAL_REG(GLOBAL_TLBIALL, (b), (v))
-#define SET_TLBIVMID(b, v)	 SET_GLOBAL_REG(TLBIVMID, (b), (v))
-#define SET_CR(b, v)		 SET_GLOBAL_REG(CR, (b), (v))
-#define SET_EAR(b, v)		 SET_GLOBAL_REG(EAR, (b), (v))
-#define SET_ESR(b, v)		 SET_GLOBAL_REG(ESR, (b), (v))
-#define SET_ESRRESTORE(b, v)	 SET_GLOBAL_REG(ESRRESTORE, (b), (v))
-#define SET_ESYNR0(b, v)	 SET_GLOBAL_REG(ESYNR0, (b), (v))
-#define SET_ESYNR1(b, v)	 SET_GLOBAL_REG(ESYNR1, (b), (v))
-#define SET_RPU_ACR(b, v)	 SET_GLOBAL_REG(RPU_ACR, (b), (v))
-
-#define GET_M2VCBR_N(b, N)	 GET_GLOBAL_REG_N(M2VCBR_N, N, (b))
-#define GET_CBACR_N(b, N)	 GET_GLOBAL_REG_N(CBACR_N, N, (b))
-#define GET_TLBTR0(b)		 GET_GLOBAL_REG(TLBTR0, (b))
-#define GET_TLBTR1(b)		 GET_GLOBAL_REG(TLBTR1, (b))
-#define GET_TLBTR2(b)		 GET_GLOBAL_REG(TLBTR2, (b))
-#define GET_TESTBUSCR(b)	 GET_GLOBAL_REG(TESTBUSCR, (b))
-#define GET_GLOBAL_TLBIALL(b)	 GET_GLOBAL_REG(GLOBAL_TLBIALL, (b))
-#define GET_TLBIVMID(b)		 GET_GLOBAL_REG(TLBIVMID, (b))
-#define GET_CR(b)		 GET_GLOBAL_REG(CR, (b))
-#define GET_EAR(b)		 GET_GLOBAL_REG(EAR, (b))
-#define GET_ESR(b)		 GET_GLOBAL_REG(ESR, (b))
-#define GET_ESRRESTORE(b)	 GET_GLOBAL_REG(ESRRESTORE, (b))
-#define GET_ESYNR0(b)		 GET_GLOBAL_REG(ESYNR0, (b))
-#define GET_ESYNR1(b)		 GET_GLOBAL_REG(ESYNR1, (b))
-#define GET_REV(b)		 GET_GLOBAL_REG(REV, (b))
-#define GET_IDR(b)		 GET_GLOBAL_REG(IDR, (b))
-#define GET_RPU_ACR(b)		 GET_GLOBAL_REG(RPU_ACR, (b))
-
-
-/* Context register setters/getters */
-#define SET_SCTLR(b, c, v)	 SET_CTX_REG(SCTLR, (b), (c), (v))
-#define SET_ACTLR(b, c, v)	 SET_CTX_REG(ACTLR, (b), (c), (v))
-#define SET_CONTEXTIDR(b, c, v)	 SET_CTX_REG(CONTEXTIDR, (b), (c), (v))
-#define SET_TTBR0(b, c, v)	 SET_CTX_REG(TTBR0, (b), (c), (v))
-#define SET_TTBR1(b, c, v)	 SET_CTX_REG(TTBR1, (b), (c), (v))
-#define SET_TTBCR(b, c, v)	 SET_CTX_REG(TTBCR, (b), (c), (v))
-#define SET_PAR(b, c, v)	 SET_CTX_REG(PAR, (b), (c), (v))
-#define SET_FSR(b, c, v)	 SET_CTX_REG(FSR, (b), (c), (v))
-#define SET_FSRRESTORE(b, c, v)	 SET_CTX_REG(FSRRESTORE, (b), (c), (v))
-#define SET_FAR(b, c, v)	 SET_CTX_REG(FAR, (b), (c), (v))
-#define SET_FSYNR0(b, c, v)	 SET_CTX_REG(FSYNR0, (b), (c), (v))
-#define SET_FSYNR1(b, c, v)	 SET_CTX_REG(FSYNR1, (b), (c), (v))
-#define SET_PRRR(b, c, v)	 SET_CTX_REG(PRRR, (b), (c), (v))
-#define SET_NMRR(b, c, v)	 SET_CTX_REG(NMRR, (b), (c), (v))
-#define SET_TLBLKCR(b, c, v)	 SET_CTX_REG(TLBLCKR, (b), (c), (v))
-#define SET_V2PSR(b, c, v)	 SET_CTX_REG(V2PSR, (b), (c), (v))
-#define SET_TLBFLPTER(b, c, v)	 SET_CTX_REG(TLBFLPTER, (b), (c), (v))
-#define SET_TLBSLPTER(b, c, v)	 SET_CTX_REG(TLBSLPTER, (b), (c), (v))
-#define SET_BFBCR(b, c, v)	 SET_CTX_REG(BFBCR, (b), (c), (v))
-#define SET_CTX_TLBIALL(b, c, v) SET_CTX_REG(CTX_TLBIALL, (b), (c), (v))
-#define SET_TLBIASID(b, c, v)	 SET_CTX_REG(TLBIASID, (b), (c), (v))
-#define SET_TLBIVA(b, c, v)	 SET_CTX_REG(TLBIVA, (b), (c), (v))
-#define SET_TLBIVAA(b, c, v)	 SET_CTX_REG(TLBIVAA, (b), (c), (v))
-#define SET_V2PPR(b, c, v)	 SET_CTX_REG(V2PPR, (b), (c), (v))
-#define SET_V2PPW(b, c, v)	 SET_CTX_REG(V2PPW, (b), (c), (v))
-#define SET_V2PUR(b, c, v)	 SET_CTX_REG(V2PUR, (b), (c), (v))
-#define SET_V2PUW(b, c, v)	 SET_CTX_REG(V2PUW, (b), (c), (v))
-#define SET_RESUME(b, c, v)	 SET_CTX_REG(RESUME, (b), (c), (v))
-
-#define GET_SCTLR(b, c)		 GET_CTX_REG(SCTLR, (b), (c))
-#define GET_ACTLR(b, c)		 GET_CTX_REG(ACTLR, (b), (c))
-#define GET_CONTEXTIDR(b, c)	 GET_CTX_REG(CONTEXTIDR, (b), (c))
-#define GET_TTBR0(b, c)		 GET_CTX_REG(TTBR0, (b), (c))
-#define GET_TTBR1(b, c)		 GET_CTX_REG(TTBR1, (b), (c))
-#define GET_TTBCR(b, c)		 GET_CTX_REG(TTBCR, (b), (c))
-#define GET_PAR(b, c)		 GET_CTX_REG(PAR, (b), (c))
-#define GET_FSR(b, c)		 GET_CTX_REG(FSR, (b), (c))
-#define GET_FSRRESTORE(b, c)	 GET_CTX_REG(FSRRESTORE, (b), (c))
-#define GET_FAR(b, c)		 GET_CTX_REG(FAR, (b), (c))
-#define GET_FSYNR0(b, c)	 GET_CTX_REG(FSYNR0, (b), (c))
-#define GET_FSYNR1(b, c)	 GET_CTX_REG(FSYNR1, (b), (c))
-#define GET_PRRR(b, c)		 GET_CTX_REG(PRRR, (b), (c))
-#define GET_NMRR(b, c)		 GET_CTX_REG(NMRR, (b), (c))
-#define GET_TLBLCKR(b, c)	 GET_CTX_REG(TLBLCKR, (b), (c))
-#define GET_V2PSR(b, c)		 GET_CTX_REG(V2PSR, (b), (c))
-#define GET_TLBFLPTER(b, c)	 GET_CTX_REG(TLBFLPTER, (b), (c))
-#define GET_TLBSLPTER(b, c)	 GET_CTX_REG(TLBSLPTER, (b), (c))
-#define GET_BFBCR(b, c)		 GET_CTX_REG(BFBCR, (b), (c))
-#define GET_CTX_TLBIALL(b, c)	 GET_CTX_REG(CTX_TLBIALL, (b), (c))
-#define GET_TLBIASID(b, c)	 GET_CTX_REG(TLBIASID, (b), (c))
-#define GET_TLBIVA(b, c)	 GET_CTX_REG(TLBIVA, (b), (c))
-#define GET_TLBIVAA(b, c)	 GET_CTX_REG(TLBIVAA, (b), (c))
-#define GET_V2PPR(b, c)		 GET_CTX_REG(V2PPR, (b), (c))
-#define GET_V2PPW(b, c)		 GET_CTX_REG(V2PPW, (b), (c))
-#define GET_V2PUR(b, c)		 GET_CTX_REG(V2PUR, (b), (c))
-#define GET_V2PUW(b, c)		 GET_CTX_REG(V2PUW, (b), (c))
-#define GET_RESUME(b, c)	 GET_CTX_REG(RESUME, (b), (c))
-
-
-/* Global field setters / getters */
-/* Global Field Setters: */
-/* CBACR_N */
-#define SET_RWVMID(b, n, v)   SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWVMID, v)
-#define SET_RWE(b, n, v)      SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWE, v)
-#define SET_RWGE(b, n, v)     SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWGE, v)
-#define SET_CBVMID(b, n, v)   SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), CBVMID, v)
-#define SET_IRPTNDX(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), IRPTNDX, v)
-
-
-/* M2VCBR_N */
-#define SET_VMID(b, n, v)     SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), VMID, v)
-#define SET_CBNDX(b, n, v)    SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), CBNDX, v)
-#define SET_BYPASSD(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BYPASSD, v)
-#define SET_BPRCOSH(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCOSH, v)
-#define SET_BPRCISH(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCISH, v)
-#define SET_BPRCNSH(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCNSH, v)
-#define SET_BPSHCFG(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPSHCFG, v)
-#define SET_NSCFG(b, n, v)    SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), NSCFG, v)
-#define SET_BPMTCFG(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMTCFG, v)
-#define SET_BPMEMTYPE(b, n, v) \
-	SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMEMTYPE, v)
-
-
-/* CR */
-#define SET_RPUE(b, v)		 SET_GLOBAL_FIELD(b, CR, RPUE, v)
-#define SET_RPUERE(b, v)	 SET_GLOBAL_FIELD(b, CR, RPUERE, v)
-#define SET_RPUEIE(b, v)	 SET_GLOBAL_FIELD(b, CR, RPUEIE, v)
-#define SET_DCDEE(b, v)		 SET_GLOBAL_FIELD(b, CR, DCDEE, v)
-#define SET_CLIENTPD(b, v)       SET_GLOBAL_FIELD(b, CR, CLIENTPD, v)
-#define SET_STALLD(b, v)	 SET_GLOBAL_FIELD(b, CR, STALLD, v)
-#define SET_TLBLKCRWE(b, v)      SET_GLOBAL_FIELD(b, CR, TLBLKCRWE, v)
-#define SET_CR_TLBIALLCFG(b, v)  SET_GLOBAL_FIELD(b, CR, CR_TLBIALLCFG, v)
-#define SET_TLBIVMIDCFG(b, v)    SET_GLOBAL_FIELD(b, CR, TLBIVMIDCFG, v)
-#define SET_CR_HUME(b, v)        SET_GLOBAL_FIELD(b, CR, CR_HUME, v)
-
-
-/* ESR */
-#define SET_CFG(b, v)		 SET_GLOBAL_FIELD(b, ESR, CFG, v)
-#define SET_BYPASS(b, v)	 SET_GLOBAL_FIELD(b, ESR, BYPASS, v)
-#define SET_ESR_MULTI(b, v)      SET_GLOBAL_FIELD(b, ESR, ESR_MULTI, v)
-
-
-/* ESYNR0 */
-#define SET_ESYNR0_AMID(b, v)    SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AMID, v)
-#define SET_ESYNR0_APID(b, v)    SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_APID, v)
-#define SET_ESYNR0_ABID(b, v)    SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ABID, v)
-#define SET_ESYNR0_AVMID(b, v)   SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AVMID, v)
-#define SET_ESYNR0_ATID(b, v)    SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ATID, v)
-
-
-/* ESYNR1 */
-#define SET_ESYNR1_AMEMTYPE(b, v) \
-			SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AMEMTYPE, v)
-#define SET_ESYNR1_ASHARED(b, v)  SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASHARED, v)
-#define SET_ESYNR1_AINNERSHARED(b, v) \
-			SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINNERSHARED, v)
-#define SET_ESYNR1_APRIV(b, v)   SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APRIV, v)
-#define SET_ESYNR1_APROTNS(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APROTNS, v)
-#define SET_ESYNR1_AINST(b, v)   SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINST, v)
-#define SET_ESYNR1_AWRITE(b, v)  SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AWRITE, v)
-#define SET_ESYNR1_ABURST(b, v)  SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ABURST, v)
-#define SET_ESYNR1_ALEN(b, v)    SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALEN, v)
-#define SET_ESYNR1_ASIZE(b, v)   SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASIZE, v)
-#define SET_ESYNR1_ALOCK(b, v)   SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALOCK, v)
-#define SET_ESYNR1_AOOO(b, v)    SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AOOO, v)
-#define SET_ESYNR1_AFULL(b, v)   SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AFULL, v)
-#define SET_ESYNR1_AC(b, v)      SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AC, v)
-#define SET_ESYNR1_DCD(b, v)     SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_DCD, v)
-
-
-/* TESTBUSCR */
-#define SET_TBE(b, v)		 SET_GLOBAL_FIELD(b, TESTBUSCR, TBE, v)
-#define SET_SPDMBE(b, v)	 SET_GLOBAL_FIELD(b, TESTBUSCR, SPDMBE, v)
-#define SET_WGSEL(b, v)		 SET_GLOBAL_FIELD(b, TESTBUSCR, WGSEL, v)
-#define SET_TBLSEL(b, v)	 SET_GLOBAL_FIELD(b, TESTBUSCR, TBLSEL, v)
-#define SET_TBHSEL(b, v)	 SET_GLOBAL_FIELD(b, TESTBUSCR, TBHSEL, v)
-#define SET_SPDM0SEL(b, v)       SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM0SEL, v)
-#define SET_SPDM1SEL(b, v)       SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM1SEL, v)
-#define SET_SPDM2SEL(b, v)       SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM2SEL, v)
-#define SET_SPDM3SEL(b, v)       SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM3SEL, v)
-
-
-/* TLBIVMID */
-#define SET_TLBIVMID_VMID(b, v)  SET_GLOBAL_FIELD(b, TLBIVMID, TLBIVMID_VMID, v)
-
-
-/* TLBRSW */
-#define SET_TLBRSW_INDEX(b, v)   SET_GLOBAL_FIELD(b, TLBRSW, TLBRSW_INDEX, v)
-#define SET_TLBBFBS(b, v)	 SET_GLOBAL_FIELD(b, TLBRSW, TLBBFBS, v)
-
-
-/* TLBTR0 */
-#define SET_PR(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, PR, v)
-#define SET_PW(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, PW, v)
-#define SET_UR(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, UR, v)
-#define SET_UW(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, UW, v)
-#define SET_XN(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, XN, v)
-#define SET_NSDESC(b, v)	 SET_GLOBAL_FIELD(b, TLBTR0, NSDESC, v)
-#define SET_ISH(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, ISH, v)
-#define SET_SH(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, SH, v)
-#define SET_MT(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, MT, v)
-#define SET_DPSIZR(b, v)	 SET_GLOBAL_FIELD(b, TLBTR0, DPSIZR, v)
-#define SET_DPSIZC(b, v)	 SET_GLOBAL_FIELD(b, TLBTR0, DPSIZC, v)
-
-
-/* TLBTR1 */
-#define SET_TLBTR1_VMID(b, v)    SET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_VMID, v)
-#define SET_TLBTR1_PA(b, v)      SET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_PA, v)
-
-
-/* TLBTR2 */
-#define SET_TLBTR2_ASID(b, v)    SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_ASID, v)
-#define SET_TLBTR2_V(b, v)       SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_V, v)
-#define SET_TLBTR2_NSTID(b, v)   SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NSTID, v)
-#define SET_TLBTR2_NV(b, v)      SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NV, v)
-#define SET_TLBTR2_VA(b, v)      SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_VA, v)
-
-
-/* Global Field Getters */
-/* CBACR_N */
-#define GET_RWVMID(b, n)	 GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWVMID)
-#define GET_RWE(b, n)		 GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWE)
-#define GET_RWGE(b, n)		 GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWGE)
-#define GET_CBVMID(b, n)	 GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), CBVMID)
-#define GET_IRPTNDX(b, n)	 GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), IRPTNDX)
-
-
-/* M2VCBR_N */
-#define GET_VMID(b, n)       GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), VMID)
-#define GET_CBNDX(b, n)      GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), CBNDX)
-#define GET_BYPASSD(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BYPASSD)
-#define GET_BPRCOSH(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCOSH)
-#define GET_BPRCISH(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCISH)
-#define GET_BPRCNSH(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCNSH)
-#define GET_BPSHCFG(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPSHCFG)
-#define GET_NSCFG(b, n)      GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), NSCFG)
-#define GET_BPMTCFG(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMTCFG)
-#define GET_BPMEMTYPE(b, n)  GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMEMTYPE)
-
-
-/* CR */
-#define GET_RPUE(b)		 GET_GLOBAL_FIELD(b, CR, RPUE)
-#define GET_RPUERE(b)		 GET_GLOBAL_FIELD(b, CR, RPUERE)
-#define GET_RPUEIE(b)		 GET_GLOBAL_FIELD(b, CR, RPUEIE)
-#define GET_DCDEE(b)		 GET_GLOBAL_FIELD(b, CR, DCDEE)
-#define GET_CLIENTPD(b)		 GET_GLOBAL_FIELD(b, CR, CLIENTPD)
-#define GET_STALLD(b)		 GET_GLOBAL_FIELD(b, CR, STALLD)
-#define GET_TLBLKCRWE(b)	 GET_GLOBAL_FIELD(b, CR, TLBLKCRWE)
-#define GET_CR_TLBIALLCFG(b)	 GET_GLOBAL_FIELD(b, CR, CR_TLBIALLCFG)
-#define GET_TLBIVMIDCFG(b)	 GET_GLOBAL_FIELD(b, CR, TLBIVMIDCFG)
-#define GET_CR_HUME(b)		 GET_GLOBAL_FIELD(b, CR, CR_HUME)
-
-
-/* ESR */
-#define GET_CFG(b)		 GET_GLOBAL_FIELD(b, ESR, CFG)
-#define GET_BYPASS(b)		 GET_GLOBAL_FIELD(b, ESR, BYPASS)
-#define GET_ESR_MULTI(b)	 GET_GLOBAL_FIELD(b, ESR, ESR_MULTI)
-
-
-/* ESYNR0 */
-#define GET_ESYNR0_AMID(b)	 GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AMID)
-#define GET_ESYNR0_APID(b)	 GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_APID)
-#define GET_ESYNR0_ABID(b)	 GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ABID)
-#define GET_ESYNR0_AVMID(b)	 GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AVMID)
-#define GET_ESYNR0_ATID(b)	 GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ATID)
-
-
-/* ESYNR1 */
-#define GET_ESYNR1_AMEMTYPE(b)   GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AMEMTYPE)
-#define GET_ESYNR1_ASHARED(b)    GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASHARED)
-#define GET_ESYNR1_AINNERSHARED(b) \
-			GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINNERSHARED)
-#define GET_ESYNR1_APRIV(b)      GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APRIV)
-#define GET_ESYNR1_APROTNS(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APROTNS)
-#define GET_ESYNR1_AINST(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINST)
-#define GET_ESYNR1_AWRITE(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AWRITE)
-#define GET_ESYNR1_ABURST(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ABURST)
-#define GET_ESYNR1_ALEN(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALEN)
-#define GET_ESYNR1_ASIZE(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASIZE)
-#define GET_ESYNR1_ALOCK(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALOCK)
-#define GET_ESYNR1_AOOO(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AOOO)
-#define GET_ESYNR1_AFULL(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AFULL)
-#define GET_ESYNR1_AC(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AC)
-#define GET_ESYNR1_DCD(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_DCD)
-
-
-/* IDR */
-#define GET_NM2VCBMT(b)		 GET_GLOBAL_FIELD(b, IDR, NM2VCBMT)
-#define GET_HTW(b)		 GET_GLOBAL_FIELD(b, IDR, HTW)
-#define GET_HUM(b)		 GET_GLOBAL_FIELD(b, IDR, HUM)
-#define GET_TLBSIZE(b)		 GET_GLOBAL_FIELD(b, IDR, TLBSIZE)
-#define GET_NCB(b)		 GET_GLOBAL_FIELD(b, IDR, NCB)
-#define GET_NIRPT(b)		 GET_GLOBAL_FIELD(b, IDR, NIRPT)
-
-
-/* REV */
-#define GET_MAJOR(b)		 GET_GLOBAL_FIELD(b, REV, MAJOR)
-#define GET_MINOR(b)		 GET_GLOBAL_FIELD(b, REV, MINOR)
-
-
-/* TESTBUSCR */
-#define GET_TBE(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, TBE)
-#define GET_SPDMBE(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, SPDMBE)
-#define GET_WGSEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, WGSEL)
-#define GET_TBLSEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, TBLSEL)
-#define GET_TBHSEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, TBHSEL)
-#define GET_SPDM0SEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM0SEL)
-#define GET_SPDM1SEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM1SEL)
-#define GET_SPDM2SEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM2SEL)
-#define GET_SPDM3SEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM3SEL)
-
-
-/* TLBIVMID */
-#define GET_TLBIVMID_VMID(b)	 GET_GLOBAL_FIELD(b, TLBIVMID, TLBIVMID_VMID)
-
-
-/* TLBTR0 */
-#define GET_PR(b)		 GET_GLOBAL_FIELD(b, TLBTR0, PR)
-#define GET_PW(b)		 GET_GLOBAL_FIELD(b, TLBTR0, PW)
-#define GET_UR(b)		 GET_GLOBAL_FIELD(b, TLBTR0, UR)
-#define GET_UW(b)		 GET_GLOBAL_FIELD(b, TLBTR0, UW)
-#define GET_XN(b)		 GET_GLOBAL_FIELD(b, TLBTR0, XN)
-#define GET_NSDESC(b)		 GET_GLOBAL_FIELD(b, TLBTR0, NSDESC)
-#define GET_ISH(b)		 GET_GLOBAL_FIELD(b, TLBTR0, ISH)
-#define GET_SH(b)		 GET_GLOBAL_FIELD(b, TLBTR0, SH)
-#define GET_MT(b)		 GET_GLOBAL_FIELD(b, TLBTR0, MT)
-#define GET_DPSIZR(b)		 GET_GLOBAL_FIELD(b, TLBTR0, DPSIZR)
-#define GET_DPSIZC(b)		 GET_GLOBAL_FIELD(b, TLBTR0, DPSIZC)
-
-
-/* TLBTR1 */
-#define GET_TLBTR1_VMID(b)	 GET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_VMID)
-#define GET_TLBTR1_PA(b)	 GET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_PA)
-
-
-/* TLBTR2 */
-#define GET_TLBTR2_ASID(b)	 GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_ASID)
-#define GET_TLBTR2_V(b)		 GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_V)
-#define GET_TLBTR2_NSTID(b)	 GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NSTID)
-#define GET_TLBTR2_NV(b)	 GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NV)
-#define GET_TLBTR2_VA(b)	 GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_VA)
-
-
-/* Context Register setters / getters */
-/* Context Register setters */
-/* ACTLR */
-#define SET_CFERE(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, CFERE, v)
-#define SET_CFEIE(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, CFEIE, v)
-#define SET_PTSHCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, PTSHCFG, v)
-#define SET_RCOSH(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, RCOSH, v)
-#define SET_RCISH(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, RCISH, v)
-#define SET_RCNSH(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, RCNSH, v)
-#define SET_PRIVCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, PRIVCFG, v)
-#define SET_DNA(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, DNA, v)
-#define SET_DNLV2PA(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, DNLV2PA, v)
-#define SET_TLBMCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, TLBMCFG, v)
-#define SET_CFCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, CFCFG, v)
-#define SET_TIPCF(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, TIPCF, v)
-#define SET_V2PCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, V2PCFG, v)
-#define SET_HUME(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, HUME, v)
-#define SET_PTMTCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, PTMTCFG, v)
-#define SET_PTMEMTYPE(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, PTMEMTYPE, v)
-
-
-/* BFBCR */
-#define SET_BFBDFE(b, c, v)	 SET_CONTEXT_FIELD(b, c, BFBCR, BFBDFE, v)
-#define SET_BFBSFE(b, c, v)	 SET_CONTEXT_FIELD(b, c, BFBCR, BFBSFE, v)
-#define SET_SFVS(b, c, v)	 SET_CONTEXT_FIELD(b, c, BFBCR, SFVS, v)
-#define SET_FLVIC(b, c, v)	 SET_CONTEXT_FIELD(b, c, BFBCR, FLVIC, v)
-#define SET_SLVIC(b, c, v)	 SET_CONTEXT_FIELD(b, c, BFBCR, SLVIC, v)
-
-
-/* CONTEXTIDR */
-#define SET_CONTEXTIDR_ASID(b, c, v)   \
-		SET_CONTEXT_FIELD(b, c, CONTEXTIDR, CONTEXTIDR_ASID, v)
-#define SET_CONTEXTIDR_PROCID(b, c, v) \
-		SET_CONTEXT_FIELD(b, c, CONTEXTIDR, PROCID, v)
-
-
-/* FSR */
-#define SET_TF(b, c, v)		 SET_CONTEXT_FIELD(b, c, FSR, TF, v)
-#define SET_AFF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, AFF, v)
-#define SET_APF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, APF, v)
-#define SET_TLBMF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, TLBMF, v)
-#define SET_HTWDEEF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, HTWDEEF, v)
-#define SET_HTWSEEF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, HTWSEEF, v)
-#define SET_MHF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, MHF, v)
-#define SET_SL(b, c, v)		 SET_CONTEXT_FIELD(b, c, FSR, SL, v)
-#define SET_SS(b, c, v)		 SET_CONTEXT_FIELD(b, c, FSR, SS, v)
-#define SET_MULTI(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, MULTI, v)
-
-
-/* FSYNR0 */
-#define SET_AMID(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR0, AMID, v)
-#define SET_APID(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR0, APID, v)
-#define SET_ABID(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR0, ABID, v)
-#define SET_ATID(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR0, ATID, v)
-
-
-/* FSYNR1 */
-#define SET_AMEMTYPE(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, AMEMTYPE, v)
-#define SET_ASHARED(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, ASHARED, v)
-#define SET_AINNERSHARED(b, c, v)  \
-				SET_CONTEXT_FIELD(b, c, FSYNR1, AINNERSHARED, v)
-#define SET_APRIV(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, APRIV, v)
-#define SET_APROTNS(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, APROTNS, v)
-#define SET_AINST(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, AINST, v)
-#define SET_AWRITE(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, AWRITE, v)
-#define SET_ABURST(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, ABURST, v)
-#define SET_ALEN(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, ALEN, v)
-#define SET_FSYNR1_ASIZE(b, c, v) \
-				SET_CONTEXT_FIELD(b, c, FSYNR1, FSYNR1_ASIZE, v)
-#define SET_ALOCK(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, ALOCK, v)
-#define SET_AFULL(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, AFULL, v)
-
-
-/* NMRR */
-#define SET_ICPC0(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC0, v)
-#define SET_ICPC1(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC1, v)
-#define SET_ICPC2(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC2, v)
-#define SET_ICPC3(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC3, v)
-#define SET_ICPC4(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC4, v)
-#define SET_ICPC5(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC5, v)
-#define SET_ICPC6(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC6, v)
-#define SET_ICPC7(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC7, v)
-#define SET_OCPC0(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC0, v)
-#define SET_OCPC1(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC1, v)
-#define SET_OCPC2(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC2, v)
-#define SET_OCPC3(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC3, v)
-#define SET_OCPC4(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC4, v)
-#define SET_OCPC5(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC5, v)
-#define SET_OCPC6(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC6, v)
-#define SET_OCPC7(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC7, v)
-
-
-/* PAR */
-#define SET_FAULT(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT, v)
-
-#define SET_FAULT_TF(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_TF, v)
-#define SET_FAULT_AFF(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_AFF, v)
-#define SET_FAULT_APF(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_APF, v)
-#define SET_FAULT_TLBMF(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, FAULT_TLBMF, v)
-#define SET_FAULT_HTWDEEF(b, c, v) \
-				SET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWDEEF, v)
-#define SET_FAULT_HTWSEEF(b, c, v) \
-				SET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWSEEF, v)
-#define SET_FAULT_MHF(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_MHF, v)
-#define SET_FAULT_SL(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_SL, v)
-#define SET_FAULT_SS(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_SS, v)
-
-#define SET_NOFAULT_SS(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_SS, v)
-#define SET_NOFAULT_MT(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_MT, v)
-#define SET_NOFAULT_SH(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_SH, v)
-#define SET_NOFAULT_NS(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_NS, v)
-#define SET_NOFAULT_NOS(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_NOS, v)
-#define SET_NPFAULT_PA(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, NPFAULT_PA, v)
-
-
-/* PRRR */
-#define SET_MTC0(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC0, v)
-#define SET_MTC1(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC1, v)
-#define SET_MTC2(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC2, v)
-#define SET_MTC3(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC3, v)
-#define SET_MTC4(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC4, v)
-#define SET_MTC5(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC5, v)
-#define SET_MTC6(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC6, v)
-#define SET_MTC7(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC7, v)
-#define SET_SHDSH0(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, SHDSH0, v)
-#define SET_SHDSH1(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, SHDSH1, v)
-#define SET_SHNMSH0(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, SHNMSH0, v)
-#define SET_SHNMSH1(b, c, v)     SET_CONTEXT_FIELD(b, c, PRRR, SHNMSH1, v)
-#define SET_NOS0(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS0, v)
-#define SET_NOS1(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS1, v)
-#define SET_NOS2(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS2, v)
-#define SET_NOS3(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS3, v)
-#define SET_NOS4(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS4, v)
-#define SET_NOS5(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS5, v)
-#define SET_NOS6(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS6, v)
-#define SET_NOS7(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS7, v)
-
-
-/* RESUME */
-#define SET_TNR(b, c, v)	 SET_CONTEXT_FIELD(b, c, RESUME, TNR, v)
-
-
-/* SCTLR */
-#define SET_M(b, c, v)		 SET_CONTEXT_FIELD(b, c, SCTLR, M, v)
-#define SET_TRE(b, c, v)	 SET_CONTEXT_FIELD(b, c, SCTLR, TRE, v)
-#define SET_AFE(b, c, v)	 SET_CONTEXT_FIELD(b, c, SCTLR, AFE, v)
-#define SET_HAF(b, c, v)	 SET_CONTEXT_FIELD(b, c, SCTLR, HAF, v)
-#define SET_BE(b, c, v)		 SET_CONTEXT_FIELD(b, c, SCTLR, BE, v)
-#define SET_AFFD(b, c, v)	 SET_CONTEXT_FIELD(b, c, SCTLR, AFFD, v)
-
-
-/* TLBLKCR */
-#define SET_LKE(b, c, v)	   SET_CONTEXT_FIELD(b, c, TLBLKCR, LKE, v)
-#define SET_TLBLKCR_TLBIALLCFG(b, c, v) \
-			SET_CONTEXT_FIELD(b, c, TLBLKCR, TLBLCKR_TLBIALLCFG, v)
-#define SET_TLBIASIDCFG(b, c, v) \
-			SET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIASIDCFG, v)
-#define SET_TLBIVAACFG(b, c, v)	SET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIVAACFG, v)
-#define SET_FLOOR(b, c, v)	SET_CONTEXT_FIELD(b, c, TLBLKCR, FLOOR, v)
-#define SET_VICTIM(b, c, v)	SET_CONTEXT_FIELD(b, c, TLBLKCR, VICTIM, v)
-
-
-/* TTBCR */
-#define SET_N(b, c, v)	         SET_CONTEXT_FIELD(b, c, TTBCR, N, v)
-#define SET_PD0(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBCR, PD0, v)
-#define SET_PD1(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBCR, PD1, v)
-
-
-/* TTBR0 */
-#define SET_TTBR0_IRGNH(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNH, v)
-#define SET_TTBR0_SH(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_SH, v)
-#define SET_TTBR0_ORGN(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_ORGN, v)
-#define SET_TTBR0_NOS(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_NOS, v)
-#define SET_TTBR0_IRGNL(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNL, v)
-#define SET_TTBR0_PA(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_PA, v)
-
-
-/* TTBR1 */
-#define SET_TTBR1_IRGNH(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNH, v)
-#define SET_TTBR1_SH(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_SH, v)
-#define SET_TTBR1_ORGN(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_ORGN, v)
-#define SET_TTBR1_NOS(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_NOS, v)
-#define SET_TTBR1_IRGNL(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNL, v)
-#define SET_TTBR1_PA(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_PA, v)
-
-
-/* V2PSR */
-#define SET_HIT(b, c, v)	 SET_CONTEXT_FIELD(b, c, V2PSR, HIT, v)
-#define SET_INDEX(b, c, v)	 SET_CONTEXT_FIELD(b, c, V2PSR, INDEX, v)
-
-
-/* Context Register getters */
-/* ACTLR */
-#define GET_CFERE(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, CFERE)
-#define GET_CFEIE(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, CFEIE)
-#define GET_PTSHCFG(b, c)       GET_CONTEXT_FIELD(b, c, ACTLR, PTSHCFG)
-#define GET_RCOSH(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, RCOSH)
-#define GET_RCISH(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, RCISH)
-#define GET_RCNSH(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, RCNSH)
-#define GET_PRIVCFG(b, c)       GET_CONTEXT_FIELD(b, c, ACTLR, PRIVCFG)
-#define GET_DNA(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, DNA)
-#define GET_DNLV2PA(b, c)       GET_CONTEXT_FIELD(b, c, ACTLR, DNLV2PA)
-#define GET_TLBMCFG(b, c)       GET_CONTEXT_FIELD(b, c, ACTLR, TLBMCFG)
-#define GET_CFCFG(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, CFCFG)
-#define GET_TIPCF(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, TIPCF)
-#define GET_V2PCFG(b, c)        GET_CONTEXT_FIELD(b, c, ACTLR, V2PCFG)
-#define GET_HUME(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, HUME)
-#define GET_PTMTCFG(b, c)       GET_CONTEXT_FIELD(b, c, ACTLR, PTMTCFG)
-#define GET_PTMEMTYPE(b, c)     GET_CONTEXT_FIELD(b, c, ACTLR, PTMEMTYPE)
-
-/* BFBCR */
-#define GET_BFBDFE(b, c)	GET_CONTEXT_FIELD(b, c, BFBCR, BFBDFE)
-#define GET_BFBSFE(b, c)	GET_CONTEXT_FIELD(b, c, BFBCR, BFBSFE)
-#define GET_SFVS(b, c)		GET_CONTEXT_FIELD(b, c, BFBCR, SFVS)
-#define GET_FLVIC(b, c)		GET_CONTEXT_FIELD(b, c, BFBCR, FLVIC)
-#define GET_SLVIC(b, c)		GET_CONTEXT_FIELD(b, c, BFBCR, SLVIC)
-
-
-/* CONTEXTIDR */
-#define GET_CONTEXTIDR_ASID(b, c) \
-			GET_CONTEXT_FIELD(b, c, CONTEXTIDR, CONTEXTIDR_ASID)
-#define GET_CONTEXTIDR_PROCID(b, c) GET_CONTEXT_FIELD(b, c, CONTEXTIDR, PROCID)
-
-
-/* FSR */
-#define GET_TF(b, c)		GET_CONTEXT_FIELD(b, c, FSR, TF)
-#define GET_AFF(b, c)		GET_CONTEXT_FIELD(b, c, FSR, AFF)
-#define GET_APF(b, c)		GET_CONTEXT_FIELD(b, c, FSR, APF)
-#define GET_TLBMF(b, c)		GET_CONTEXT_FIELD(b, c, FSR, TLBMF)
-#define GET_HTWDEEF(b, c)	GET_CONTEXT_FIELD(b, c, FSR, HTWDEEF)
-#define GET_HTWSEEF(b, c)	GET_CONTEXT_FIELD(b, c, FSR, HTWSEEF)
-#define GET_MHF(b, c)		GET_CONTEXT_FIELD(b, c, FSR, MHF)
-#define GET_SL(b, c)		GET_CONTEXT_FIELD(b, c, FSR, SL)
-#define GET_SS(b, c)		GET_CONTEXT_FIELD(b, c, FSR, SS)
-#define GET_MULTI(b, c)		GET_CONTEXT_FIELD(b, c, FSR, MULTI)
-
-
-/* FSYNR0 */
-#define GET_AMID(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR0, AMID)
-#define GET_APID(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR0, APID)
-#define GET_ABID(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR0, ABID)
-#define GET_ATID(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR0, ATID)
-
-
-/* FSYNR1 */
-#define GET_AMEMTYPE(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, AMEMTYPE)
-#define GET_ASHARED(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, ASHARED)
-#define GET_AINNERSHARED(b, c)  GET_CONTEXT_FIELD(b, c, FSYNR1, AINNERSHARED)
-#define GET_APRIV(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR1, APRIV)
-#define GET_APROTNS(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, APROTNS)
-#define GET_AINST(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR1, AINST)
-#define GET_AWRITE(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, AWRITE)
-#define GET_ABURST(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, ABURST)
-#define GET_ALEN(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR1, ALEN)
-#define GET_FSYNR1_ASIZE(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, FSYNR1_ASIZE)
-#define GET_ALOCK(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR1, ALOCK)
-#define GET_AFULL(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR1, AFULL)
-
-
-/* NMRR */
-#define GET_ICPC0(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC0)
-#define GET_ICPC1(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC1)
-#define GET_ICPC2(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC2)
-#define GET_ICPC3(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC3)
-#define GET_ICPC4(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC4)
-#define GET_ICPC5(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC5)
-#define GET_ICPC6(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC6)
-#define GET_ICPC7(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC7)
-#define GET_OCPC0(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC0)
-#define GET_OCPC1(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC1)
-#define GET_OCPC2(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC2)
-#define GET_OCPC3(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC3)
-#define GET_OCPC4(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC4)
-#define GET_OCPC5(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC5)
-#define GET_OCPC6(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC6)
-#define GET_OCPC7(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC7)
-#define NMRR_ICP(nmrr, n)	(((nmrr) & (3 << ((n) * 2))) >> ((n) * 2))
-#define NMRR_OCP(nmrr, n)	(((nmrr) & (3 << ((n) * 2 + 16))) >> \
-								((n) * 2 + 16))
-
-/* PAR */
-#define GET_FAULT(b, c)		GET_CONTEXT_FIELD(b, c, PAR, FAULT)
-
-#define GET_FAULT_TF(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_TF)
-#define GET_FAULT_AFF(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_AFF)
-#define GET_FAULT_APF(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_APF)
-#define GET_FAULT_TLBMF(b, c)   GET_CONTEXT_FIELD(b, c, PAR, FAULT_TLBMF)
-#define GET_FAULT_HTWDEEF(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWDEEF)
-#define GET_FAULT_HTWSEEF(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWSEEF)
-#define GET_FAULT_MHF(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_MHF)
-#define GET_FAULT_SL(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_SL)
-#define GET_FAULT_SS(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_SS)
-
-#define GET_NOFAULT_SS(b, c)	GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_SS)
-#define GET_NOFAULT_MT(b, c)	GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_MT)
-#define GET_NOFAULT_SH(b, c)	GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_SH)
-#define GET_NOFAULT_NS(b, c)	GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_NS)
-#define GET_NOFAULT_NOS(b, c)   GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_NOS)
-#define GET_NPFAULT_PA(b, c)	GET_CONTEXT_FIELD(b, c, PAR, PAR_NPFAULT_PA)
-
-
-/* PRRR */
-#define GET_MTC0(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC0)
-#define GET_MTC1(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC1)
-#define GET_MTC2(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC2)
-#define GET_MTC3(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC3)
-#define GET_MTC4(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC4)
-#define GET_MTC5(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC5)
-#define GET_MTC6(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC6)
-#define GET_MTC7(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC7)
-#define GET_SHDSH0(b, c)	GET_CONTEXT_FIELD(b, c, PRRR, SHDSH0)
-#define GET_SHDSH1(b, c)	GET_CONTEXT_FIELD(b, c, PRRR, SHDSH1)
-#define GET_SHNMSH0(b, c)	GET_CONTEXT_FIELD(b, c, PRRR, SHNMSH0)
-#define GET_SHNMSH1(b, c)	GET_CONTEXT_FIELD(b, c, PRRR, SHNMSH1)
-#define GET_NOS0(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS0)
-#define GET_NOS1(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS1)
-#define GET_NOS2(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS2)
-#define GET_NOS3(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS3)
-#define GET_NOS4(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS4)
-#define GET_NOS5(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS5)
-#define GET_NOS6(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS6)
-#define GET_NOS7(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS7)
-#define PRRR_NOS(prrr, n)	 ((prrr) & (1 << ((n) + 24)) ? 1 : 0)
-#define PRRR_MT(prrr, n)	 ((((prrr) & (3 << ((n) * 2))) >> ((n) * 2)))
-
-
-/* RESUME */
-#define GET_TNR(b, c)		GET_CONTEXT_FIELD(b, c, RESUME, TNR)
-
-
-/* SCTLR */
-#define GET_M(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, M)
-#define GET_TRE(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, TRE)
-#define GET_AFE(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, AFE)
-#define GET_HAF(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, HAF)
-#define GET_BE(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, BE)
-#define GET_AFFD(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, AFFD)
-
-
-/* TLBLKCR */
-#define GET_LKE(b, c)		GET_CONTEXT_FIELD(b, c, TLBLKCR, LKE)
-#define GET_TLBLCKR_TLBIALLCFG(b, c) \
-			GET_CONTEXT_FIELD(b, c, TLBLKCR, TLBLCKR_TLBIALLCFG)
-#define GET_TLBIASIDCFG(b, c)   GET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIASIDCFG)
-#define GET_TLBIVAACFG(b, c)	GET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIVAACFG)
-#define GET_FLOOR(b, c)		GET_CONTEXT_FIELD(b, c, TLBLKCR, FLOOR)
-#define GET_VICTIM(b, c)	GET_CONTEXT_FIELD(b, c, TLBLKCR, VICTIM)
-
-
-/* TTBCR */
-#define GET_N(b, c)		GET_CONTEXT_FIELD(b, c, TTBCR, N)
-#define GET_PD0(b, c)		GET_CONTEXT_FIELD(b, c, TTBCR, PD0)
-#define GET_PD1(b, c)		GET_CONTEXT_FIELD(b, c, TTBCR, PD1)
-
-
-/* TTBR0 */
-#define GET_TTBR0_IRGNH(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNH)
-#define GET_TTBR0_SH(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_SH)
-#define GET_TTBR0_ORGN(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_ORGN)
-#define GET_TTBR0_NOS(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_NOS)
-#define GET_TTBR0_IRGNL(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNL)
-#define GET_TTBR0_PA(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_PA)
-
-
-/* TTBR1 */
-#define GET_TTBR1_IRGNH(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNH)
-#define GET_TTBR1_SH(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_SH)
-#define GET_TTBR1_ORGN(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_ORGN)
-#define GET_TTBR1_NOS(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_NOS)
-#define GET_TTBR1_IRGNL(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNL)
-#define GET_TTBR1_PA(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_PA)
-
-
-/* V2PSR */
-#define GET_HIT(b, c)		GET_CONTEXT_FIELD(b, c, V2PSR, HIT)
-#define GET_INDEX(b, c)		GET_CONTEXT_FIELD(b, c, V2PSR, INDEX)
-
-
-/* Global Registers */
-#define M2VCBR_N	(0xFF000)
-#define CBACR_N		(0xFF800)
-#define TLBRSW		(0xFFE00)
-#define TLBTR0		(0xFFE80)
-#define TLBTR1		(0xFFE84)
-#define TLBTR2		(0xFFE88)
-#define TESTBUSCR	(0xFFE8C)
-#define GLOBAL_TLBIALL	(0xFFF00)
-#define TLBIVMID	(0xFFF04)
-#define CR		(0xFFF80)
-#define EAR		(0xFFF84)
-#define ESR		(0xFFF88)
-#define ESRRESTORE	(0xFFF8C)
-#define ESYNR0		(0xFFF90)
-#define ESYNR1		(0xFFF94)
-#define REV		(0xFFFF4)
-#define IDR		(0xFFFF8)
-#define RPU_ACR		(0xFFFFC)
-
-
-/* Context Bank Registers */
-#define SCTLR		(0x000)
-#define ACTLR		(0x004)
-#define CONTEXTIDR	(0x008)
-#define TTBR0		(0x010)
-#define TTBR1		(0x014)
-#define TTBCR		(0x018)
-#define PAR		(0x01C)
-#define FSR		(0x020)
-#define FSRRESTORE	(0x024)
-#define FAR		(0x028)
-#define FSYNR0		(0x02C)
-#define FSYNR1		(0x030)
-#define PRRR		(0x034)
-#define NMRR		(0x038)
-#define TLBLCKR		(0x03C)
-#define V2PSR		(0x040)
-#define TLBFLPTER	(0x044)
-#define TLBSLPTER	(0x048)
-#define BFBCR		(0x04C)
-#define CTX_TLBIALL	(0x800)
-#define TLBIASID	(0x804)
-#define TLBIVA		(0x808)
-#define TLBIVAA		(0x80C)
-#define V2PPR		(0x810)
-#define V2PPW		(0x814)
-#define V2PUR		(0x818)
-#define V2PUW		(0x81C)
-#define RESUME		(0x820)
-
-
-/* Global Register Fields */
-/* CBACRn */
-#define RWVMID        (RWVMID_MASK       << RWVMID_SHIFT)
-#define RWE           (RWE_MASK          << RWE_SHIFT)
-#define RWGE          (RWGE_MASK         << RWGE_SHIFT)
-#define CBVMID        (CBVMID_MASK       << CBVMID_SHIFT)
-#define IRPTNDX       (IRPTNDX_MASK      << IRPTNDX_SHIFT)
-
-
-/* CR */
-#define RPUE          (RPUE_MASK          << RPUE_SHIFT)
-#define RPUERE        (RPUERE_MASK        << RPUERE_SHIFT)
-#define RPUEIE        (RPUEIE_MASK        << RPUEIE_SHIFT)
-#define DCDEE         (DCDEE_MASK         << DCDEE_SHIFT)
-#define CLIENTPD      (CLIENTPD_MASK      << CLIENTPD_SHIFT)
-#define STALLD        (STALLD_MASK        << STALLD_SHIFT)
-#define TLBLKCRWE     (TLBLKCRWE_MASK     << TLBLKCRWE_SHIFT)
-#define CR_TLBIALLCFG (CR_TLBIALLCFG_MASK << CR_TLBIALLCFG_SHIFT)
-#define TLBIVMIDCFG   (TLBIVMIDCFG_MASK   << TLBIVMIDCFG_SHIFT)
-#define CR_HUME       (CR_HUME_MASK       << CR_HUME_SHIFT)
-
-
-/* ESR */
-#define CFG           (CFG_MASK          << CFG_SHIFT)
-#define BYPASS        (BYPASS_MASK       << BYPASS_SHIFT)
-#define ESR_MULTI     (ESR_MULTI_MASK    << ESR_MULTI_SHIFT)
-
-
-/* ESYNR0 */
-#define ESYNR0_AMID   (ESYNR0_AMID_MASK  << ESYNR0_AMID_SHIFT)
-#define ESYNR0_APID   (ESYNR0_APID_MASK  << ESYNR0_APID_SHIFT)
-#define ESYNR0_ABID   (ESYNR0_ABID_MASK  << ESYNR0_ABID_SHIFT)
-#define ESYNR0_AVMID  (ESYNR0_AVMID_MASK << ESYNR0_AVMID_SHIFT)
-#define ESYNR0_ATID   (ESYNR0_ATID_MASK  << ESYNR0_ATID_SHIFT)
-
-
-/* ESYNR1 */
-#define ESYNR1_AMEMTYPE      (ESYNR1_AMEMTYPE_MASK    << ESYNR1_AMEMTYPE_SHIFT)
-#define ESYNR1_ASHARED       (ESYNR1_ASHARED_MASK     << ESYNR1_ASHARED_SHIFT)
-#define ESYNR1_AINNERSHARED  (ESYNR1_AINNERSHARED_MASK<< \
-						ESYNR1_AINNERSHARED_SHIFT)
-#define ESYNR1_APRIV         (ESYNR1_APRIV_MASK       << ESYNR1_APRIV_SHIFT)
-#define ESYNR1_APROTNS       (ESYNR1_APROTNS_MASK     << ESYNR1_APROTNS_SHIFT)
-#define ESYNR1_AINST         (ESYNR1_AINST_MASK       << ESYNR1_AINST_SHIFT)
-#define ESYNR1_AWRITE        (ESYNR1_AWRITE_MASK      << ESYNR1_AWRITE_SHIFT)
-#define ESYNR1_ABURST        (ESYNR1_ABURST_MASK      << ESYNR1_ABURST_SHIFT)
-#define ESYNR1_ALEN          (ESYNR1_ALEN_MASK        << ESYNR1_ALEN_SHIFT)
-#define ESYNR1_ASIZE         (ESYNR1_ASIZE_MASK       << ESYNR1_ASIZE_SHIFT)
-#define ESYNR1_ALOCK         (ESYNR1_ALOCK_MASK       << ESYNR1_ALOCK_SHIFT)
-#define ESYNR1_AOOO          (ESYNR1_AOOO_MASK        << ESYNR1_AOOO_SHIFT)
-#define ESYNR1_AFULL         (ESYNR1_AFULL_MASK       << ESYNR1_AFULL_SHIFT)
-#define ESYNR1_AC            (ESYNR1_AC_MASK          << ESYNR1_AC_SHIFT)
-#define ESYNR1_DCD           (ESYNR1_DCD_MASK         << ESYNR1_DCD_SHIFT)
-
-
-/* IDR */
-#define NM2VCBMT      (NM2VCBMT_MASK     << NM2VCBMT_SHIFT)
-#define HTW           (HTW_MASK          << HTW_SHIFT)
-#define HUM           (HUM_MASK          << HUM_SHIFT)
-#define TLBSIZE       (TLBSIZE_MASK      << TLBSIZE_SHIFT)
-#define NCB           (NCB_MASK          << NCB_SHIFT)
-#define NIRPT         (NIRPT_MASK        << NIRPT_SHIFT)
-
-
-/* M2VCBRn */
-#define VMID          (VMID_MASK         << VMID_SHIFT)
-#define CBNDX         (CBNDX_MASK        << CBNDX_SHIFT)
-#define BYPASSD       (BYPASSD_MASK      << BYPASSD_SHIFT)
-#define BPRCOSH       (BPRCOSH_MASK      << BPRCOSH_SHIFT)
-#define BPRCISH       (BPRCISH_MASK      << BPRCISH_SHIFT)
-#define BPRCNSH       (BPRCNSH_MASK      << BPRCNSH_SHIFT)
-#define BPSHCFG       (BPSHCFG_MASK      << BPSHCFG_SHIFT)
-#define NSCFG         (NSCFG_MASK        << NSCFG_SHIFT)
-#define BPMTCFG       (BPMTCFG_MASK      << BPMTCFG_SHIFT)
-#define BPMEMTYPE     (BPMEMTYPE_MASK    << BPMEMTYPE_SHIFT)
-
-
-/* REV */
-#define IDR_MINOR     (MINOR_MASK        << MINOR_SHIFT)
-#define IDR_MAJOR     (MAJOR_MASK        << MAJOR_SHIFT)
-
-
-/* TESTBUSCR */
-#define TBE           (TBE_MASK          << TBE_SHIFT)
-#define SPDMBE        (SPDMBE_MASK       << SPDMBE_SHIFT)
-#define WGSEL         (WGSEL_MASK        << WGSEL_SHIFT)
-#define TBLSEL        (TBLSEL_MASK       << TBLSEL_SHIFT)
-#define TBHSEL        (TBHSEL_MASK       << TBHSEL_SHIFT)
-#define SPDM0SEL      (SPDM0SEL_MASK     << SPDM0SEL_SHIFT)
-#define SPDM1SEL      (SPDM1SEL_MASK     << SPDM1SEL_SHIFT)
-#define SPDM2SEL      (SPDM2SEL_MASK     << SPDM2SEL_SHIFT)
-#define SPDM3SEL      (SPDM3SEL_MASK     << SPDM3SEL_SHIFT)
-
-
-/* TLBIVMID */
-#define TLBIVMID_VMID (TLBIVMID_VMID_MASK << TLBIVMID_VMID_SHIFT)
-
-
-/* TLBRSW */
-#define TLBRSW_INDEX  (TLBRSW_INDEX_MASK << TLBRSW_INDEX_SHIFT)
-#define TLBBFBS       (TLBBFBS_MASK      << TLBBFBS_SHIFT)
-
-
-/* TLBTR0 */
-#define PR            (PR_MASK           << PR_SHIFT)
-#define PW            (PW_MASK           << PW_SHIFT)
-#define UR            (UR_MASK           << UR_SHIFT)
-#define UW            (UW_MASK           << UW_SHIFT)
-#define XN            (XN_MASK           << XN_SHIFT)
-#define NSDESC        (NSDESC_MASK       << NSDESC_SHIFT)
-#define ISH           (ISH_MASK          << ISH_SHIFT)
-#define SH            (SH_MASK           << SH_SHIFT)
-#define MT            (MT_MASK           << MT_SHIFT)
-#define DPSIZR        (DPSIZR_MASK       << DPSIZR_SHIFT)
-#define DPSIZC        (DPSIZC_MASK       << DPSIZC_SHIFT)
-
-
-/* TLBTR1 */
-#define TLBTR1_VMID   (TLBTR1_VMID_MASK  << TLBTR1_VMID_SHIFT)
-#define TLBTR1_PA     (TLBTR1_PA_MASK    << TLBTR1_PA_SHIFT)
-
-
-/* TLBTR2 */
-#define TLBTR2_ASID   (TLBTR2_ASID_MASK  << TLBTR2_ASID_SHIFT)
-#define TLBTR2_V      (TLBTR2_V_MASK     << TLBTR2_V_SHIFT)
-#define TLBTR2_NSTID  (TLBTR2_NSTID_MASK << TLBTR2_NSTID_SHIFT)
-#define TLBTR2_NV     (TLBTR2_NV_MASK    << TLBTR2_NV_SHIFT)
-#define TLBTR2_VA     (TLBTR2_VA_MASK    << TLBTR2_VA_SHIFT)
-
-
-/* Context Register Fields */
-/* ACTLR */
-#define CFERE              (CFERE_MASK              << CFERE_SHIFT)
-#define CFEIE              (CFEIE_MASK              << CFEIE_SHIFT)
-#define PTSHCFG            (PTSHCFG_MASK            << PTSHCFG_SHIFT)
-#define RCOSH              (RCOSH_MASK              << RCOSH_SHIFT)
-#define RCISH              (RCISH_MASK              << RCISH_SHIFT)
-#define RCNSH              (RCNSH_MASK              << RCNSH_SHIFT)
-#define PRIVCFG            (PRIVCFG_MASK            << PRIVCFG_SHIFT)
-#define DNA                (DNA_MASK                << DNA_SHIFT)
-#define DNLV2PA            (DNLV2PA_MASK            << DNLV2PA_SHIFT)
-#define TLBMCFG            (TLBMCFG_MASK            << TLBMCFG_SHIFT)
-#define CFCFG              (CFCFG_MASK              << CFCFG_SHIFT)
-#define TIPCF              (TIPCF_MASK              << TIPCF_SHIFT)
-#define V2PCFG             (V2PCFG_MASK             << V2PCFG_SHIFT)
-#define HUME               (HUME_MASK               << HUME_SHIFT)
-#define PTMTCFG            (PTMTCFG_MASK            << PTMTCFG_SHIFT)
-#define PTMEMTYPE          (PTMEMTYPE_MASK          << PTMEMTYPE_SHIFT)
-
-
-/* BFBCR */
-#define BFBDFE             (BFBDFE_MASK             << BFBDFE_SHIFT)
-#define BFBSFE             (BFBSFE_MASK             << BFBSFE_SHIFT)
-#define SFVS               (SFVS_MASK               << SFVS_SHIFT)
-#define FLVIC              (FLVIC_MASK              << FLVIC_SHIFT)
-#define SLVIC              (SLVIC_MASK              << SLVIC_SHIFT)
-
-
-/* CONTEXTIDR */
-#define CONTEXTIDR_ASID    (CONTEXTIDR_ASID_MASK    << CONTEXTIDR_ASID_SHIFT)
-#define PROCID             (PROCID_MASK             << PROCID_SHIFT)
-
-
-/* FSR */
-#define TF                 (TF_MASK                 << TF_SHIFT)
-#define AFF                (AFF_MASK                << AFF_SHIFT)
-#define APF                (APF_MASK                << APF_SHIFT)
-#define TLBMF              (TLBMF_MASK              << TLBMF_SHIFT)
-#define HTWDEEF            (HTWDEEF_MASK            << HTWDEEF_SHIFT)
-#define HTWSEEF            (HTWSEEF_MASK            << HTWSEEF_SHIFT)
-#define MHF                (MHF_MASK                << MHF_SHIFT)
-#define SL                 (SL_MASK                 << SL_SHIFT)
-#define SS                 (SS_MASK                 << SS_SHIFT)
-#define MULTI              (MULTI_MASK              << MULTI_SHIFT)
-
-
-/* FSYNR0 */
-#define AMID               (AMID_MASK               << AMID_SHIFT)
-#define APID               (APID_MASK               << APID_SHIFT)
-#define ABID               (ABID_MASK               << ABID_SHIFT)
-#define ATID               (ATID_MASK               << ATID_SHIFT)
-
-
-/* FSYNR1 */
-#define AMEMTYPE           (AMEMTYPE_MASK           << AMEMTYPE_SHIFT)
-#define ASHARED            (ASHARED_MASK            << ASHARED_SHIFT)
-#define AINNERSHARED       (AINNERSHARED_MASK       << AINNERSHARED_SHIFT)
-#define APRIV              (APRIV_MASK              << APRIV_SHIFT)
-#define APROTNS            (APROTNS_MASK            << APROTNS_SHIFT)
-#define AINST              (AINST_MASK              << AINST_SHIFT)
-#define AWRITE             (AWRITE_MASK             << AWRITE_SHIFT)
-#define ABURST             (ABURST_MASK             << ABURST_SHIFT)
-#define ALEN               (ALEN_MASK               << ALEN_SHIFT)
-#define FSYNR1_ASIZE       (FSYNR1_ASIZE_MASK       << FSYNR1_ASIZE_SHIFT)
-#define ALOCK              (ALOCK_MASK              << ALOCK_SHIFT)
-#define AFULL              (AFULL_MASK              << AFULL_SHIFT)
-
-
-/* NMRR */
-#define ICPC0              (ICPC0_MASK              << ICPC0_SHIFT)
-#define ICPC1              (ICPC1_MASK              << ICPC1_SHIFT)
-#define ICPC2              (ICPC2_MASK              << ICPC2_SHIFT)
-#define ICPC3              (ICPC3_MASK              << ICPC3_SHIFT)
-#define ICPC4              (ICPC4_MASK              << ICPC4_SHIFT)
-#define ICPC5              (ICPC5_MASK              << ICPC5_SHIFT)
-#define ICPC6              (ICPC6_MASK              << ICPC6_SHIFT)
-#define ICPC7              (ICPC7_MASK              << ICPC7_SHIFT)
-#define OCPC0              (OCPC0_MASK              << OCPC0_SHIFT)
-#define OCPC1              (OCPC1_MASK              << OCPC1_SHIFT)
-#define OCPC2              (OCPC2_MASK              << OCPC2_SHIFT)
-#define OCPC3              (OCPC3_MASK              << OCPC3_SHIFT)
-#define OCPC4              (OCPC4_MASK              << OCPC4_SHIFT)
-#define OCPC5              (OCPC5_MASK              << OCPC5_SHIFT)
-#define OCPC6              (OCPC6_MASK              << OCPC6_SHIFT)
-#define OCPC7              (OCPC7_MASK              << OCPC7_SHIFT)
-
-
-/* PAR */
-#define FAULT              (FAULT_MASK              << FAULT_SHIFT)
-/* If a fault is present, these are the
-same as the fault fields in the FAR */
-#define FAULT_TF           (FAULT_TF_MASK           << FAULT_TF_SHIFT)
-#define FAULT_AFF          (FAULT_AFF_MASK          << FAULT_AFF_SHIFT)
-#define FAULT_APF          (FAULT_APF_MASK          << FAULT_APF_SHIFT)
-#define FAULT_TLBMF        (FAULT_TLBMF_MASK        << FAULT_TLBMF_SHIFT)
-#define FAULT_HTWDEEF      (FAULT_HTWDEEF_MASK      << FAULT_HTWDEEF_SHIFT)
-#define FAULT_HTWSEEF      (FAULT_HTWSEEF_MASK      << FAULT_HTWSEEF_SHIFT)
-#define FAULT_MHF          (FAULT_MHF_MASK          << FAULT_MHF_SHIFT)
-#define FAULT_SL           (FAULT_SL_MASK           << FAULT_SL_SHIFT)
-#define FAULT_SS           (FAULT_SS_MASK           << FAULT_SS_SHIFT)
-
-/* If NO fault is present, the following fields are in effect */
-/* (FAULT remains as before) */
-#define PAR_NOFAULT_SS     (PAR_NOFAULT_SS_MASK     << PAR_NOFAULT_SS_SHIFT)
-#define PAR_NOFAULT_MT     (PAR_NOFAULT_MT_MASK     << PAR_NOFAULT_MT_SHIFT)
-#define PAR_NOFAULT_SH     (PAR_NOFAULT_SH_MASK     << PAR_NOFAULT_SH_SHIFT)
-#define PAR_NOFAULT_NS     (PAR_NOFAULT_NS_MASK     << PAR_NOFAULT_NS_SHIFT)
-#define PAR_NOFAULT_NOS    (PAR_NOFAULT_NOS_MASK    << PAR_NOFAULT_NOS_SHIFT)
-#define PAR_NPFAULT_PA     (PAR_NPFAULT_PA_MASK     << PAR_NPFAULT_PA_SHIFT)
-
-
-/* PRRR */
-#define MTC0               (MTC0_MASK               << MTC0_SHIFT)
-#define MTC1               (MTC1_MASK               << MTC1_SHIFT)
-#define MTC2               (MTC2_MASK               << MTC2_SHIFT)
-#define MTC3               (MTC3_MASK               << MTC3_SHIFT)
-#define MTC4               (MTC4_MASK               << MTC4_SHIFT)
-#define MTC5               (MTC5_MASK               << MTC5_SHIFT)
-#define MTC6               (MTC6_MASK               << MTC6_SHIFT)
-#define MTC7               (MTC7_MASK               << MTC7_SHIFT)
-#define SHDSH0             (SHDSH0_MASK             << SHDSH0_SHIFT)
-#define SHDSH1             (SHDSH1_MASK             << SHDSH1_SHIFT)
-#define SHNMSH0            (SHNMSH0_MASK            << SHNMSH0_SHIFT)
-#define SHNMSH1            (SHNMSH1_MASK            << SHNMSH1_SHIFT)
-#define NOS0               (NOS0_MASK               << NOS0_SHIFT)
-#define NOS1               (NOS1_MASK               << NOS1_SHIFT)
-#define NOS2               (NOS2_MASK               << NOS2_SHIFT)
-#define NOS3               (NOS3_MASK               << NOS3_SHIFT)
-#define NOS4               (NOS4_MASK               << NOS4_SHIFT)
-#define NOS5               (NOS5_MASK               << NOS5_SHIFT)
-#define NOS6               (NOS6_MASK               << NOS6_SHIFT)
-#define NOS7               (NOS7_MASK               << NOS7_SHIFT)
-
-
-/* RESUME */
-#define TNR                (TNR_MASK                << TNR_SHIFT)
-
-
-/* SCTLR */
-#define M                  (M_MASK                  << M_SHIFT)
-#define TRE                (TRE_MASK                << TRE_SHIFT)
-#define AFE                (AFE_MASK                << AFE_SHIFT)
-#define HAF                (HAF_MASK                << HAF_SHIFT)
-#define BE                 (BE_MASK                 << BE_SHIFT)
-#define AFFD               (AFFD_MASK               << AFFD_SHIFT)
-
-
-/* TLBIASID */
-#define TLBIASID_ASID      (TLBIASID_ASID_MASK      << TLBIASID_ASID_SHIFT)
-
-
-/* TLBIVA */
-#define TLBIVA_ASID        (TLBIVA_ASID_MASK        << TLBIVA_ASID_SHIFT)
-#define TLBIVA_VA          (TLBIVA_VA_MASK          << TLBIVA_VA_SHIFT)
-
-
-/* TLBIVAA */
-#define TLBIVAA_VA         (TLBIVAA_VA_MASK         << TLBIVAA_VA_SHIFT)
-
-
-/* TLBLCKR */
-#define LKE                (LKE_MASK                << LKE_SHIFT)
-#define TLBLCKR_TLBIALLCFG (TLBLCKR_TLBIALLCFG_MASK<<TLBLCKR_TLBIALLCFG_SHIFT)
-#define TLBIASIDCFG        (TLBIASIDCFG_MASK        << TLBIASIDCFG_SHIFT)
-#define TLBIVAACFG         (TLBIVAACFG_MASK         << TLBIVAACFG_SHIFT)
-#define FLOOR              (FLOOR_MASK              << FLOOR_SHIFT)
-#define VICTIM             (VICTIM_MASK             << VICTIM_SHIFT)
-
-
-/* TTBCR */
-#define N                  (N_MASK                  << N_SHIFT)
-#define PD0                (PD0_MASK                << PD0_SHIFT)
-#define PD1                (PD1_MASK                << PD1_SHIFT)
-
-
-/* TTBR0 */
-#define TTBR0_IRGNH        (TTBR0_IRGNH_MASK        << TTBR0_IRGNH_SHIFT)
-#define TTBR0_SH           (TTBR0_SH_MASK           << TTBR0_SH_SHIFT)
-#define TTBR0_ORGN         (TTBR0_ORGN_MASK         << TTBR0_ORGN_SHIFT)
-#define TTBR0_NOS          (TTBR0_NOS_MASK          << TTBR0_NOS_SHIFT)
-#define TTBR0_IRGNL        (TTBR0_IRGNL_MASK        << TTBR0_IRGNL_SHIFT)
-#define TTBR0_PA           (TTBR0_PA_MASK           << TTBR0_PA_SHIFT)
-
-
-/* TTBR1 */
-#define TTBR1_IRGNH        (TTBR1_IRGNH_MASK        << TTBR1_IRGNH_SHIFT)
-#define TTBR1_SH           (TTBR1_SH_MASK           << TTBR1_SH_SHIFT)
-#define TTBR1_ORGN         (TTBR1_ORGN_MASK         << TTBR1_ORGN_SHIFT)
-#define TTBR1_NOS          (TTBR1_NOS_MASK          << TTBR1_NOS_SHIFT)
-#define TTBR1_IRGNL        (TTBR1_IRGNL_MASK        << TTBR1_IRGNL_SHIFT)
-#define TTBR1_PA           (TTBR1_PA_MASK           << TTBR1_PA_SHIFT)
-
-
-/* V2PSR */
-#define HIT                (HIT_MASK                << HIT_SHIFT)
-#define INDEX              (INDEX_MASK              << INDEX_SHIFT)
-
-
-/* V2Pxx */
-#define V2Pxx_INDEX        (V2Pxx_INDEX_MASK        << V2Pxx_INDEX_SHIFT)
-#define V2Pxx_VA           (V2Pxx_VA_MASK           << V2Pxx_VA_SHIFT)
-
-
-/* Global Register Masks */
-/* CBACRn */
-#define RWVMID_MASK               0x1F
-#define RWE_MASK                  0x01
-#define RWGE_MASK                 0x01
-#define CBVMID_MASK               0x1F
-#define IRPTNDX_MASK              0xFF
-
-
-/* CR */
-#define RPUE_MASK                 0x01
-#define RPUERE_MASK               0x01
-#define RPUEIE_MASK               0x01
-#define DCDEE_MASK                0x01
-#define CLIENTPD_MASK             0x01
-#define STALLD_MASK               0x01
-#define TLBLKCRWE_MASK            0x01
-#define CR_TLBIALLCFG_MASK        0x01
-#define TLBIVMIDCFG_MASK          0x01
-#define CR_HUME_MASK              0x01
-
-
-/* ESR */
-#define CFG_MASK                  0x01
-#define BYPASS_MASK               0x01
-#define ESR_MULTI_MASK            0x01
-
-
-/* ESYNR0 */
-#define ESYNR0_AMID_MASK          0xFF
-#define ESYNR0_APID_MASK          0x1F
-#define ESYNR0_ABID_MASK          0x07
-#define ESYNR0_AVMID_MASK         0x1F
-#define ESYNR0_ATID_MASK          0xFF
-
-
-/* ESYNR1 */
-#define ESYNR1_AMEMTYPE_MASK             0x07
-#define ESYNR1_ASHARED_MASK              0x01
-#define ESYNR1_AINNERSHARED_MASK         0x01
-#define ESYNR1_APRIV_MASK                0x01
-#define ESYNR1_APROTNS_MASK              0x01
-#define ESYNR1_AINST_MASK                0x01
-#define ESYNR1_AWRITE_MASK               0x01
-#define ESYNR1_ABURST_MASK               0x01
-#define ESYNR1_ALEN_MASK                 0x0F
-#define ESYNR1_ASIZE_MASK                0x01
-#define ESYNR1_ALOCK_MASK                0x03
-#define ESYNR1_AOOO_MASK                 0x01
-#define ESYNR1_AFULL_MASK                0x01
-#define ESYNR1_AC_MASK                   0x01
-#define ESYNR1_DCD_MASK                  0x01
-
-
-/* IDR */
-#define NM2VCBMT_MASK             0x1FF
-#define HTW_MASK                  0x01
-#define HUM_MASK                  0x01
-#define TLBSIZE_MASK              0x0F
-#define NCB_MASK                  0xFF
-#define NIRPT_MASK                0xFF
-
-
-/* M2VCBRn */
-#define VMID_MASK                 0x1F
-#define CBNDX_MASK                0xFF
-#define BYPASSD_MASK              0x01
-#define BPRCOSH_MASK              0x01
-#define BPRCISH_MASK              0x01
-#define BPRCNSH_MASK              0x01
-#define BPSHCFG_MASK              0x03
-#define NSCFG_MASK                0x03
-#define BPMTCFG_MASK              0x01
-#define BPMEMTYPE_MASK            0x07
-
-
-/* REV */
-#define MINOR_MASK                0x0F
-#define MAJOR_MASK                0x0F
-
-
-/* TESTBUSCR */
-#define TBE_MASK                  0x01
-#define SPDMBE_MASK               0x01
-#define WGSEL_MASK                0x03
-#define TBLSEL_MASK               0x03
-#define TBHSEL_MASK               0x03
-#define SPDM0SEL_MASK             0x0F
-#define SPDM1SEL_MASK             0x0F
-#define SPDM2SEL_MASK             0x0F
-#define SPDM3SEL_MASK             0x0F
-
-
-/* TLBIMID */
-#define TLBIVMID_VMID_MASK        0x1F
-
-
-/* TLBRSW */
-#define TLBRSW_INDEX_MASK         0xFF
-#define TLBBFBS_MASK              0x03
-
-
-/* TLBTR0 */
-#define PR_MASK                   0x01
-#define PW_MASK                   0x01
-#define UR_MASK                   0x01
-#define UW_MASK                   0x01
-#define XN_MASK                   0x01
-#define NSDESC_MASK               0x01
-#define ISH_MASK                  0x01
-#define SH_MASK                   0x01
-#define MT_MASK                   0x07
-#define DPSIZR_MASK               0x07
-#define DPSIZC_MASK               0x07
-
-
-/* TLBTR1 */
-#define TLBTR1_VMID_MASK          0x1F
-#define TLBTR1_PA_MASK            0x000FFFFF
-
-
-/* TLBTR2 */
-#define TLBTR2_ASID_MASK          0xFF
-#define TLBTR2_V_MASK             0x01
-#define TLBTR2_NSTID_MASK         0x01
-#define TLBTR2_NV_MASK            0x01
-#define TLBTR2_VA_MASK            0x000FFFFF
-
-
-/* Global Register Shifts */
-/* CBACRn */
-#define RWVMID_SHIFT             0
-#define RWE_SHIFT                8
-#define RWGE_SHIFT               9
-#define CBVMID_SHIFT             16
-#define IRPTNDX_SHIFT            24
-
-
-/* CR */
-#define RPUE_SHIFT               0
-#define RPUERE_SHIFT             1
-#define RPUEIE_SHIFT             2
-#define DCDEE_SHIFT              3
-#define CLIENTPD_SHIFT           4
-#define STALLD_SHIFT             5
-#define TLBLKCRWE_SHIFT          6
-#define CR_TLBIALLCFG_SHIFT      7
-#define TLBIVMIDCFG_SHIFT        8
-#define CR_HUME_SHIFT            9
-
-
-/* ESR */
-#define CFG_SHIFT                0
-#define BYPASS_SHIFT             1
-#define ESR_MULTI_SHIFT          31
-
-
-/* ESYNR0 */
-#define ESYNR0_AMID_SHIFT        0
-#define ESYNR0_APID_SHIFT        8
-#define ESYNR0_ABID_SHIFT        13
-#define ESYNR0_AVMID_SHIFT       16
-#define ESYNR0_ATID_SHIFT        24
-
-
-/* ESYNR1 */
-#define ESYNR1_AMEMTYPE_SHIFT           0
-#define ESYNR1_ASHARED_SHIFT            3
-#define ESYNR1_AINNERSHARED_SHIFT       4
-#define ESYNR1_APRIV_SHIFT              5
-#define ESYNR1_APROTNS_SHIFT            6
-#define ESYNR1_AINST_SHIFT              7
-#define ESYNR1_AWRITE_SHIFT             8
-#define ESYNR1_ABURST_SHIFT             10
-#define ESYNR1_ALEN_SHIFT               12
-#define ESYNR1_ASIZE_SHIFT              16
-#define ESYNR1_ALOCK_SHIFT              20
-#define ESYNR1_AOOO_SHIFT               22
-#define ESYNR1_AFULL_SHIFT              24
-#define ESYNR1_AC_SHIFT                 30
-#define ESYNR1_DCD_SHIFT                31
-
-
-/* IDR */
-#define NM2VCBMT_SHIFT           0
-#define HTW_SHIFT                9
-#define HUM_SHIFT                10
-#define TLBSIZE_SHIFT            12
-#define NCB_SHIFT                16
-#define NIRPT_SHIFT              24
-
-
-/* M2VCBRn */
-#define VMID_SHIFT               0
-#define CBNDX_SHIFT              8
-#define BYPASSD_SHIFT            16
-#define BPRCOSH_SHIFT            17
-#define BPRCISH_SHIFT            18
-#define BPRCNSH_SHIFT            19
-#define BPSHCFG_SHIFT            20
-#define NSCFG_SHIFT              22
-#define BPMTCFG_SHIFT            24
-#define BPMEMTYPE_SHIFT          25
-
-
-/* REV */
-#define MINOR_SHIFT              0
-#define MAJOR_SHIFT              4
-
-
-/* TESTBUSCR */
-#define TBE_SHIFT                0
-#define SPDMBE_SHIFT             1
-#define WGSEL_SHIFT              8
-#define TBLSEL_SHIFT             12
-#define TBHSEL_SHIFT             14
-#define SPDM0SEL_SHIFT           16
-#define SPDM1SEL_SHIFT           20
-#define SPDM2SEL_SHIFT           24
-#define SPDM3SEL_SHIFT           28
-
-
-/* TLBIMID */
-#define TLBIVMID_VMID_SHIFT      0
-
-
-/* TLBRSW */
-#define TLBRSW_INDEX_SHIFT       0
-#define TLBBFBS_SHIFT            8
-
-
-/* TLBTR0 */
-#define PR_SHIFT                 0
-#define PW_SHIFT                 1
-#define UR_SHIFT                 2
-#define UW_SHIFT                 3
-#define XN_SHIFT                 4
-#define NSDESC_SHIFT             6
-#define ISH_SHIFT                7
-#define SH_SHIFT                 8
-#define MT_SHIFT                 9
-#define DPSIZR_SHIFT             16
-#define DPSIZC_SHIFT             20
-
-
-/* TLBTR1 */
-#define TLBTR1_VMID_SHIFT        0
-#define TLBTR1_PA_SHIFT          12
-
-
-/* TLBTR2 */
-#define TLBTR2_ASID_SHIFT        0
-#define TLBTR2_V_SHIFT           8
-#define TLBTR2_NSTID_SHIFT       9
-#define TLBTR2_NV_SHIFT          10
-#define TLBTR2_VA_SHIFT          12
-
-
-/* Context Register Masks */
-/* ACTLR */
-#define CFERE_MASK                       0x01
-#define CFEIE_MASK                       0x01
-#define PTSHCFG_MASK                     0x03
-#define RCOSH_MASK                       0x01
-#define RCISH_MASK                       0x01
-#define RCNSH_MASK                       0x01
-#define PRIVCFG_MASK                     0x03
-#define DNA_MASK                         0x01
-#define DNLV2PA_MASK                     0x01
-#define TLBMCFG_MASK                     0x03
-#define CFCFG_MASK                       0x01
-#define TIPCF_MASK                       0x01
-#define V2PCFG_MASK                      0x03
-#define HUME_MASK                        0x01
-#define PTMTCFG_MASK                     0x01
-#define PTMEMTYPE_MASK                   0x07
-
-
-/* BFBCR */
-#define BFBDFE_MASK                      0x01
-#define BFBSFE_MASK                      0x01
-#define SFVS_MASK                        0x01
-#define FLVIC_MASK                       0x0F
-#define SLVIC_MASK                       0x0F
-
-
-/* CONTEXTIDR */
-#define CONTEXTIDR_ASID_MASK             0xFF
-#define PROCID_MASK                      0x00FFFFFF
-
-
-/* FSR */
-#define TF_MASK                          0x01
-#define AFF_MASK                         0x01
-#define APF_MASK                         0x01
-#define TLBMF_MASK                       0x01
-#define HTWDEEF_MASK                     0x01
-#define HTWSEEF_MASK                     0x01
-#define MHF_MASK                         0x01
-#define SL_MASK                          0x01
-#define SS_MASK                          0x01
-#define MULTI_MASK                       0x01
-
-
-/* FSYNR0 */
-#define AMID_MASK                        0xFF
-#define APID_MASK                        0x1F
-#define ABID_MASK                        0x07
-#define ATID_MASK                        0xFF
-
-
-/* FSYNR1 */
-#define AMEMTYPE_MASK                    0x07
-#define ASHARED_MASK                     0x01
-#define AINNERSHARED_MASK                0x01
-#define APRIV_MASK                       0x01
-#define APROTNS_MASK                     0x01
-#define AINST_MASK                       0x01
-#define AWRITE_MASK                      0x01
-#define ABURST_MASK                      0x01
-#define ALEN_MASK                        0x0F
-#define FSYNR1_ASIZE_MASK                0x07
-#define ALOCK_MASK                       0x03
-#define AFULL_MASK                       0x01
-
-
-/* NMRR */
-#define ICPC0_MASK                       0x03
-#define ICPC1_MASK                       0x03
-#define ICPC2_MASK                       0x03
-#define ICPC3_MASK                       0x03
-#define ICPC4_MASK                       0x03
-#define ICPC5_MASK                       0x03
-#define ICPC6_MASK                       0x03
-#define ICPC7_MASK                       0x03
-#define OCPC0_MASK                       0x03
-#define OCPC1_MASK                       0x03
-#define OCPC2_MASK                       0x03
-#define OCPC3_MASK                       0x03
-#define OCPC4_MASK                       0x03
-#define OCPC5_MASK                       0x03
-#define OCPC6_MASK                       0x03
-#define OCPC7_MASK                       0x03
-
-
-/* PAR */
-#define FAULT_MASK                       0x01
-/* If a fault is present, these are the
-same as the fault fields in the FAR */
-#define FAULT_TF_MASK                    0x01
-#define FAULT_AFF_MASK                   0x01
-#define FAULT_APF_MASK                   0x01
-#define FAULT_TLBMF_MASK                 0x01
-#define FAULT_HTWDEEF_MASK               0x01
-#define FAULT_HTWSEEF_MASK               0x01
-#define FAULT_MHF_MASK                   0x01
-#define FAULT_SL_MASK                    0x01
-#define FAULT_SS_MASK                    0x01
-
-/* If NO fault is present, the following
- * fields are in effect
- * (FAULT remains as before) */
-#define PAR_NOFAULT_SS_MASK              0x01
-#define PAR_NOFAULT_MT_MASK              0x07
-#define PAR_NOFAULT_SH_MASK              0x01
-#define PAR_NOFAULT_NS_MASK              0x01
-#define PAR_NOFAULT_NOS_MASK             0x01
-#define PAR_NPFAULT_PA_MASK              0x000FFFFF
-
-
-/* PRRR */
-#define MTC0_MASK                        0x03
-#define MTC1_MASK                        0x03
-#define MTC2_MASK                        0x03
-#define MTC3_MASK                        0x03
-#define MTC4_MASK                        0x03
-#define MTC5_MASK                        0x03
-#define MTC6_MASK                        0x03
-#define MTC7_MASK                        0x03
-#define SHDSH0_MASK                      0x01
-#define SHDSH1_MASK                      0x01
-#define SHNMSH0_MASK                     0x01
-#define SHNMSH1_MASK                     0x01
-#define NOS0_MASK                        0x01
-#define NOS1_MASK                        0x01
-#define NOS2_MASK                        0x01
-#define NOS3_MASK                        0x01
-#define NOS4_MASK                        0x01
-#define NOS5_MASK                        0x01
-#define NOS6_MASK                        0x01
-#define NOS7_MASK                        0x01
-
-
-/* RESUME */
-#define TNR_MASK                         0x01
-
-
-/* SCTLR */
-#define M_MASK                           0x01
-#define TRE_MASK                         0x01
-#define AFE_MASK                         0x01
-#define HAF_MASK                         0x01
-#define BE_MASK                          0x01
-#define AFFD_MASK                        0x01
-
-
-/* TLBIASID */
-#define TLBIASID_ASID_MASK               0xFF
-
-
-/* TLBIVA */
-#define TLBIVA_ASID_MASK                 0xFF
-#define TLBIVA_VA_MASK                   0x000FFFFF
-
-
-/* TLBIVAA */
-#define TLBIVAA_VA_MASK                  0x000FFFFF
-
-
-/* TLBLCKR */
-#define LKE_MASK                         0x01
-#define TLBLCKR_TLBIALLCFG_MASK          0x01
-#define TLBIASIDCFG_MASK                 0x01
-#define TLBIVAACFG_MASK                  0x01
-#define FLOOR_MASK                       0xFF
-#define VICTIM_MASK                      0xFF
-
-
-/* TTBCR */
-#define N_MASK                           0x07
-#define PD0_MASK                         0x01
-#define PD1_MASK                         0x01
-
-
-/* TTBR0 */
-#define TTBR0_IRGNH_MASK                 0x01
-#define TTBR0_SH_MASK                    0x01
-#define TTBR0_ORGN_MASK                  0x03
-#define TTBR0_NOS_MASK                   0x01
-#define TTBR0_IRGNL_MASK                 0x01
-#define TTBR0_PA_MASK                    0x0003FFFF
-
-
-/* TTBR1 */
-#define TTBR1_IRGNH_MASK                 0x01
-#define TTBR1_SH_MASK                    0x01
-#define TTBR1_ORGN_MASK                  0x03
-#define TTBR1_NOS_MASK                   0x01
-#define TTBR1_IRGNL_MASK                 0x01
-#define TTBR1_PA_MASK                    0x0003FFFF
-
-
-/* V2PSR */
-#define HIT_MASK                         0x01
-#define INDEX_MASK                       0xFF
-
-
-/* V2Pxx */
-#define V2Pxx_INDEX_MASK                 0xFF
-#define V2Pxx_VA_MASK                    0x000FFFFF
-
-
-/* Context Register Shifts */
-/* ACTLR */
-#define CFERE_SHIFT                    0
-#define CFEIE_SHIFT                    1
-#define PTSHCFG_SHIFT                  2
-#define RCOSH_SHIFT                    4
-#define RCISH_SHIFT                    5
-#define RCNSH_SHIFT                    6
-#define PRIVCFG_SHIFT                  8
-#define DNA_SHIFT                      10
-#define DNLV2PA_SHIFT                  11
-#define TLBMCFG_SHIFT                  12
-#define CFCFG_SHIFT                    14
-#define TIPCF_SHIFT                    15
-#define V2PCFG_SHIFT                   16
-#define HUME_SHIFT                     18
-#define PTMTCFG_SHIFT                  20
-#define PTMEMTYPE_SHIFT                21
-
-
-/* BFBCR */
-#define BFBDFE_SHIFT                   0
-#define BFBSFE_SHIFT                   1
-#define SFVS_SHIFT                     2
-#define FLVIC_SHIFT                    4
-#define SLVIC_SHIFT                    8
-
-
-/* CONTEXTIDR */
-#define CONTEXTIDR_ASID_SHIFT          0
-#define PROCID_SHIFT                   8
-
-
-/* FSR */
-#define TF_SHIFT                       1
-#define AFF_SHIFT                      2
-#define APF_SHIFT                      3
-#define TLBMF_SHIFT                    4
-#define HTWDEEF_SHIFT                  5
-#define HTWSEEF_SHIFT                  6
-#define MHF_SHIFT                      7
-#define SL_SHIFT                       16
-#define SS_SHIFT                       30
-#define MULTI_SHIFT                    31
-
-
-/* FSYNR0 */
-#define AMID_SHIFT                     0
-#define APID_SHIFT                     8
-#define ABID_SHIFT                     13
-#define ATID_SHIFT                     24
-
-
-/* FSYNR1 */
-#define AMEMTYPE_SHIFT                 0
-#define ASHARED_SHIFT                  3
-#define AINNERSHARED_SHIFT             4
-#define APRIV_SHIFT                    5
-#define APROTNS_SHIFT                  6
-#define AINST_SHIFT                    7
-#define AWRITE_SHIFT                   8
-#define ABURST_SHIFT                   10
-#define ALEN_SHIFT                     12
-#define FSYNR1_ASIZE_SHIFT             16
-#define ALOCK_SHIFT                    20
-#define AFULL_SHIFT                    24
-
-
-/* NMRR */
-#define ICPC0_SHIFT                    0
-#define ICPC1_SHIFT                    2
-#define ICPC2_SHIFT                    4
-#define ICPC3_SHIFT                    6
-#define ICPC4_SHIFT                    8
-#define ICPC5_SHIFT                    10
-#define ICPC6_SHIFT                    12
-#define ICPC7_SHIFT                    14
-#define OCPC0_SHIFT                    16
-#define OCPC1_SHIFT                    18
-#define OCPC2_SHIFT                    20
-#define OCPC3_SHIFT                    22
-#define OCPC4_SHIFT                    24
-#define OCPC5_SHIFT                    26
-#define OCPC6_SHIFT                    28
-#define OCPC7_SHIFT                    30
-
-
-/* PAR */
-#define FAULT_SHIFT                    0
-/* If a fault is present, these are the
-same as the fault fields in the FAR */
-#define FAULT_TF_SHIFT                 1
-#define FAULT_AFF_SHIFT                2
-#define FAULT_APF_SHIFT                3
-#define FAULT_TLBMF_SHIFT              4
-#define FAULT_HTWDEEF_SHIFT            5
-#define FAULT_HTWSEEF_SHIFT            6
-#define FAULT_MHF_SHIFT                7
-#define FAULT_SL_SHIFT                 16
-#define FAULT_SS_SHIFT                 30
-
-/* If NO fault is present, the following
- * fields are in effect
- * (FAULT remains as before) */
-#define PAR_NOFAULT_SS_SHIFT           1
-#define PAR_NOFAULT_MT_SHIFT           4
-#define PAR_NOFAULT_SH_SHIFT           7
-#define PAR_NOFAULT_NS_SHIFT           9
-#define PAR_NOFAULT_NOS_SHIFT          10
-#define PAR_NPFAULT_PA_SHIFT           12
-
-
-/* PRRR */
-#define MTC0_SHIFT                     0
-#define MTC1_SHIFT                     2
-#define MTC2_SHIFT                     4
-#define MTC3_SHIFT                     6
-#define MTC4_SHIFT                     8
-#define MTC5_SHIFT                     10
-#define MTC6_SHIFT                     12
-#define MTC7_SHIFT                     14
-#define SHDSH0_SHIFT                   16
-#define SHDSH1_SHIFT                   17
-#define SHNMSH0_SHIFT                  18
-#define SHNMSH1_SHIFT                  19
-#define NOS0_SHIFT                     24
-#define NOS1_SHIFT                     25
-#define NOS2_SHIFT                     26
-#define NOS3_SHIFT                     27
-#define NOS4_SHIFT                     28
-#define NOS5_SHIFT                     29
-#define NOS6_SHIFT                     30
-#define NOS7_SHIFT                     31
-
-
-/* RESUME */
-#define TNR_SHIFT                      0
-
-
-/* SCTLR */
-#define M_SHIFT                        0
-#define TRE_SHIFT                      1
-#define AFE_SHIFT                      2
-#define HAF_SHIFT                      3
-#define BE_SHIFT                       4
-#define AFFD_SHIFT                     5
-
-
-/* TLBIASID */
-#define TLBIASID_ASID_SHIFT            0
-
-
-/* TLBIVA */
-#define TLBIVA_ASID_SHIFT              0
-#define TLBIVA_VA_SHIFT                12
-
-
-/* TLBIVAA */
-#define TLBIVAA_VA_SHIFT               12
-
-
-/* TLBLCKR */
-#define LKE_SHIFT                      0
-#define TLBLCKR_TLBIALLCFG_SHIFT       1
-#define TLBIASIDCFG_SHIFT              2
-#define TLBIVAACFG_SHIFT               3
-#define FLOOR_SHIFT                    8
-#define VICTIM_SHIFT                   8
-
-
-/* TTBCR */
-#define N_SHIFT                        3
-#define PD0_SHIFT                      4
-#define PD1_SHIFT                      5
-
-
-/* TTBR0 */
-#define TTBR0_IRGNH_SHIFT              0
-#define TTBR0_SH_SHIFT                 1
-#define TTBR0_ORGN_SHIFT               3
-#define TTBR0_NOS_SHIFT                5
-#define TTBR0_IRGNL_SHIFT              6
-#define TTBR0_PA_SHIFT                 14
-
-
-/* TTBR1 */
-#define TTBR1_IRGNH_SHIFT              0
-#define TTBR1_SH_SHIFT                 1
-#define TTBR1_ORGN_SHIFT               3
-#define TTBR1_NOS_SHIFT                5
-#define TTBR1_IRGNL_SHIFT              6
-#define TTBR1_PA_SHIFT                 14
-
-
-/* V2PSR */
-#define HIT_SHIFT                      0
-#define INDEX_SHIFT                    8
-
-
-/* V2Pxx */
-#define V2Pxx_INDEX_SHIFT              0
-#define V2Pxx_VA_SHIFT                 12
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/irqs-8960.h b/arch/arm/mach-msm/include/mach/irqs-8960.h
deleted file mode 100644
index 81ab2a6..0000000
--- a/arch/arm/mach-msm/include/mach/irqs-8960.h
+++ /dev/null
@@ -1,277 +0,0 @@
-/* Copyright (c) 2011 Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MSM_IRQS_8960_H
-#define __ASM_ARCH_MSM_IRQS_8960_H
-
-/* MSM ACPU Interrupt Numbers */
-
-/* 0-15:  STI/SGI (software triggered/generated interrupts)
-   16-31: PPI (private peripheral interrupts)
-   32+:   SPI (shared peripheral interrupts) */
-
-#define GIC_PPI_START 16
-#define GIC_SPI_START 32
-
-#define INT_VGIC				(GIC_PPI_START + 0)
-#define INT_DEBUG_TIMER_EXP			(GIC_PPI_START + 1)
-#define INT_GP_TIMER_EXP			(GIC_PPI_START + 2)
-#define INT_GP_TIMER2_EXP			(GIC_PPI_START + 3)
-#define WDT0_ACCSCSSNBARK_INT			(GIC_PPI_START + 4)
-#define WDT1_ACCSCSSNBARK_INT			(GIC_PPI_START + 5)
-#define AVS_SVICINT				(GIC_PPI_START + 6)
-#define AVS_SVICINTSWDONE			(GIC_PPI_START + 7)
-#define CPU_DBGCPUXCOMMRXFULL			(GIC_PPI_START + 8)
-#define CPU_DBGCPUXCOMMTXEMPTY			(GIC_PPI_START + 9)
-#define CPU_SICCPUXPERFMONIRPTREQ		(GIC_PPI_START + 10)
-#define SC_AVSCPUXDOWN				(GIC_PPI_START + 11)
-#define SC_AVSCPUXUP				(GIC_PPI_START + 12)
-#define SC_SICCPUXACGIRPTREQ			(GIC_PPI_START + 13)
-#define SC_SICCPUXEXTFAULTIRPTREQ		(GIC_PPI_START + 14)
-/* PPI 15 is unused */
-
-#define SC_SICMPUIRPTREQ			(GIC_SPI_START + 0)
-#define SC_SICL2IRPTREQ				(GIC_SPI_START + 1)
-#define SC_SICL2PERFMONIRPTREQ			(GIC_SPI_START + 2)
-#define SC_SICAGCIRPTREQ			(GIC_SPI_START + 3)
-#define TLMM_APCC_DIR_CONN_IRQ_0		(GIC_SPI_START + 4)
-#define TLMM_APCC_DIR_CONN_IRQ_1		(GIC_SPI_START + 5)
-#define TLMM_APCC_DIR_CONN_IRQ_2		(GIC_SPI_START + 6)
-#define TLMM_APCC_DIR_CONN_IRQ_3		(GIC_SPI_START + 7)
-#define TLMM_APCC_DIR_CONN_IRQ_4		(GIC_SPI_START + 8)
-#define TLMM_APCC_DIR_CONN_IRQ_5		(GIC_SPI_START + 9)
-#define TLMM_APCC_DIR_CONN_IRQ_6		(GIC_SPI_START + 10)
-#define TLMM_APCC_DIR_CONN_IRQ_7		(GIC_SPI_START + 11)
-#define TLMM_APCC_DIR_CONN_IRQ_8		(GIC_SPI_START + 12)
-#define TLMM_APCC_DIR_CONN_IRQ_9		(GIC_SPI_START + 13)
-#define PM8921_SEC_IRQ_103			(GIC_SPI_START + 14)
-#define PM8018_SEC_IRQ_106			(GIC_SPI_START + 15)
-#define TLMM_APCC_SUMMARY_IRQ			(GIC_SPI_START + 16)
-#define SPDM_RT_1_IRQ				(GIC_SPI_START + 17)
-#define SPDM_DIAG_IRQ				(GIC_SPI_START + 18)
-#define RPM_APCC_CPU0_GP_HIGH_IRQ		(GIC_SPI_START + 19)
-#define RPM_APCC_CPU0_GP_MEDIUM_IRQ		(GIC_SPI_START + 20)
-#define RPM_APCC_CPU0_GP_LOW_IRQ		(GIC_SPI_START + 21)
-#define RPM_APCC_CPU0_WAKE_UP_IRQ		(GIC_SPI_START + 22)
-#define RPM_APCC_CPU1_GP_HIGH_IRQ		(GIC_SPI_START + 23)
-#define RPM_APCC_CPU1_GP_MEDIUM_IRQ		(GIC_SPI_START + 24)
-#define RPM_APCC_CPU1_GP_LOW_IRQ		(GIC_SPI_START + 25)
-#define RPM_APCC_CPU1_WAKE_UP_IRQ		(GIC_SPI_START + 26)
-#define SSBI2_2_SC_CPU0_SECURE_IRQ		(GIC_SPI_START + 27)
-#define SSBI2_2_SC_CPU0_NON_SECURE_IRQ		(GIC_SPI_START + 28)
-#define SSBI2_1_SC_CPU0_SECURE_IRQ		(GIC_SPI_START + 29)
-#define SSBI2_1_SC_CPU0_NON_SECURE_IRQ		(GIC_SPI_START + 30)
-#define MSMC_SC_SEC_CE_IRQ			(GIC_SPI_START + 31)
-#define MSMC_SC_PRI_CE_IRQ			(GIC_SPI_START + 32)
-#define SLIMBUS0_CORE_EE1_IRQ			(GIC_SPI_START + 33)
-#define SLIMBUS0_BAM_EE1_IRQ			(GIC_SPI_START + 34)
-#define Q6FW_WDOG_EXPIRED_IRQ			(GIC_SPI_START + 35)
-#define Q6SW_WDOG_EXPIRED_IRQ			(GIC_SPI_START + 36)
-#define MSS_TO_APPS_IRQ_0			(GIC_SPI_START + 37)
-#define MSS_TO_APPS_IRQ_1			(GIC_SPI_START + 38)
-#define MSS_TO_APPS_IRQ_2			(GIC_SPI_START + 39)
-#define MSS_TO_APPS_IRQ_3			(GIC_SPI_START + 40)
-#define MSS_TO_APPS_IRQ_4			(GIC_SPI_START + 41)
-#define MSS_TO_APPS_IRQ_5			(GIC_SPI_START + 42)
-#define MSS_TO_APPS_IRQ_6			(GIC_SPI_START + 43)
-#define MSS_TO_APPS_IRQ_7			(GIC_SPI_START + 44)
-#define MSS_TO_APPS_IRQ_8			(GIC_SPI_START + 45)
-#define MSS_TO_APPS_IRQ_9			(GIC_SPI_START + 46)
-#define VPE_IRQ					(GIC_SPI_START + 47)
-#define VFE_IRQ					(GIC_SPI_START + 48)
-#define VCODEC_IRQ				(GIC_SPI_START + 49)
-#define TV_ENC_IRQ				(GIC_SPI_START + 50)
-#define SMMU_VPE_CB_SC_SECURE_IRQ		(GIC_SPI_START + 51)
-#define SMMU_VPE_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 52)
-#define SMMU_VFE_CB_SC_SECURE_IRQ		(GIC_SPI_START + 53)
-#define SMMU_VFE_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 54)
-#define SMMU_VCODEC_B_CB_SC_SECURE_IRQ		(GIC_SPI_START + 55)
-#define SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 56)
-#define SMMU_VCODEC_A_CB_SC_SECURE_IRQ		(GIC_SPI_START + 57)
-#define SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 58)
-#define SMMU_ROT_CB_SC_SECURE_IRQ		(GIC_SPI_START + 59)
-#define SMMU_ROT_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 60)
-#define SMMU_MDP1_CB_SC_SECURE_IRQ		(GIC_SPI_START + 61)
-#define SMMU_MDP1_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 62)
-#define SMMU_MDP0_CB_SC_SECURE_IRQ		(GIC_SPI_START + 63)
-#define SMMU_MDP0_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 64)
-#define SMMU_JPEGD_CB_SC_SECURE_IRQ		(GIC_SPI_START + 65)
-#define SMMU_JPEGD_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 66)
-#define SMMU_IJPEG_CB_SC_SECURE_IRQ		(GIC_SPI_START + 67)
-#define SMMU_IJPEG_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 68)
-#define SMMU_GFX3D_CB_SC_SECURE_IRQ		(GIC_SPI_START + 69)
-#define SMMU_GFX3D_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 70)
-#define SMMU_GFX2D0_CB_SC_SECURE_IRQ		(GIC_SPI_START + 71)
-#define SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 72)
-#define ROT_IRQ					(GIC_SPI_START + 73)
-#define MMSS_FABRIC_IRQ				(GIC_SPI_START + 74)
-#define MDP_IRQ					(GIC_SPI_START + 75)
-#define JPEGD_IRQ				(GIC_SPI_START + 76)
-#define JPEG_IRQ				(GIC_SPI_START + 77)
-#define MMSS_IMEM_IRQ				(GIC_SPI_START + 78)
-#define HDMI_IRQ				(GIC_SPI_START + 79)
-#define GFX3D_IRQ				(GIC_SPI_START + 80)
-#define GFX2D0_IRQ				(GIC_SPI_START + 81)
-#define DSI1_IRQ				(GIC_SPI_START + 82)
-#define CSI_1_IRQ				(GIC_SPI_START + 83)
-#define CSI_0_IRQ				(GIC_SPI_START + 84)
-#define LPASS_SCSS_AUDIO_IF_OUT0_IRQ		(GIC_SPI_START + 85)
-#define LPASS_SCSS_MIDI_IRQ			(GIC_SPI_START + 86)
-#define LPASS_Q6SS_WDOG_EXPIRED			(GIC_SPI_START + 87)
-#define LPASS_SCSS_GP_LOW_IRQ			(GIC_SPI_START + 88)
-#define LPASS_SCSS_GP_MEDIUM_IRQ		(GIC_SPI_START + 89)
-#define LPASS_SCSS_GP_HIGH_IRQ			(GIC_SPI_START + 90)
-#define TOP_IMEM_IRQ				(GIC_SPI_START + 91)
-#define FABRIC_SYS_IRQ				(GIC_SPI_START + 92)
-#define FABRIC_APPS_IRQ				(GIC_SPI_START + 93)
-#define USB1_HS_BAM_IRQ				(GIC_SPI_START + 94)
-#define SDC4_BAM_IRQ				(GIC_SPI_START + 95)
-#define SDC3_BAM_IRQ				(GIC_SPI_START + 96)
-#define SDC2_BAM_IRQ				(GIC_SPI_START + 97)
-#define SDC1_BAM_IRQ				(GIC_SPI_START + 98)
-#define FABRIC_SPS_IRQ				(GIC_SPI_START + 99)
-#define USB1_HS_IRQ				(GIC_SPI_START + 100)
-#define SDC4_IRQ_0				(GIC_SPI_START + 101)
-#define SDC3_IRQ_0				(GIC_SPI_START + 102)
-#define SDC2_IRQ_0				(GIC_SPI_START + 103)
-#define SDC1_IRQ_0				(GIC_SPI_START + 104)
-#define SPS_BAM_DMA_IRQ				(GIC_SPI_START + 105)
-#define SPS_SEC_VIOL_IRQ			(GIC_SPI_START + 106)
-#define SPS_MTI_0				(GIC_SPI_START + 107)
-#define SPS_MTI_1				(GIC_SPI_START + 108)
-#define SPS_MTI_2				(GIC_SPI_START + 109)
-#define SPS_MTI_3				(GIC_SPI_START + 110)
-#define SPS_MTI_4				(GIC_SPI_START + 111)
-#define SPS_MTI_5				(GIC_SPI_START + 112)
-#define SPS_MTI_6				(GIC_SPI_START + 113)
-#define SPS_MTI_7				(GIC_SPI_START + 114)
-#define SPS_MTI_8				(GIC_SPI_START + 115)
-#define SPS_MTI_9				(GIC_SPI_START + 116)
-#define SPS_MTI_10				(GIC_SPI_START + 117)
-#define SPS_MTI_11				(GIC_SPI_START + 118)
-#define SPS_MTI_12				(GIC_SPI_START + 119)
-#define SPS_MTI_13				(GIC_SPI_START + 120)
-#define SPS_MTI_14				(GIC_SPI_START + 121)
-#define SPS_MTI_15				(GIC_SPI_START + 122)
-#define SPS_MTI_16				(GIC_SPI_START + 123)
-#define SPS_MTI_17				(GIC_SPI_START + 124)
-#define SPS_MTI_18				(GIC_SPI_START + 125)
-#define SPS_MTI_19				(GIC_SPI_START + 126)
-#define SPS_MTI_20				(GIC_SPI_START + 127)
-#define SPS_MTI_21				(GIC_SPI_START + 128)
-#define SPS_MTI_22				(GIC_SPI_START + 129)
-#define SPS_MTI_23				(GIC_SPI_START + 130)
-#define SPS_MTI_24				(GIC_SPI_START + 131)
-#define SPS_MTI_25				(GIC_SPI_START + 132)
-#define SPS_MTI_26				(GIC_SPI_START + 133)
-#define SPS_MTI_27				(GIC_SPI_START + 134)
-#define SPS_MTI_28				(GIC_SPI_START + 135)
-#define SPS_MTI_29				(GIC_SPI_START + 136)
-#define SPS_MTI_30				(GIC_SPI_START + 137)
-#define SPS_MTI_31				(GIC_SPI_START + 138)
-#define CSIPHY_4LN_IRQ				(GIC_SPI_START + 139)
-#define CSIPHY_2LN_IRQ				(GIC_SPI_START + 140)
-#define USB2_IRQ				(GIC_SPI_START + 141)
-#define USB1_IRQ				(GIC_SPI_START + 142)
-#define TSSC_SSBI_IRQ				(GIC_SPI_START + 143)
-#define TSSC_SAMPLE_IRQ				(GIC_SPI_START + 144)
-#define TSSC_PENUP_IRQ				(GIC_SPI_START + 145)
-#define GSBI1_UARTDM_IRQ			(GIC_SPI_START + 146)
-#define GSBI1_QUP_IRQ				(GIC_SPI_START + 147)
-#define GSBI2_UARTDM_IRQ			(GIC_SPI_START + 148)
-#define GSBI2_QUP_IRQ			        (GIC_SPI_START + 149)
-#define GSBI3_UARTDM_IRQ			(GIC_SPI_START + 150)
-#define GSBI3_QUP_IRQ				(GIC_SPI_START + 151)
-#define GSBI4_UARTDM_IRQ			(GIC_SPI_START + 152)
-#define GSBI4_QUP_IRQ				(GIC_SPI_START + 153)
-#define GSBI5_UARTDM_IRQ			(GIC_SPI_START + 154)
-#define GSBI5_QUP_IRQ				(GIC_SPI_START + 155)
-#define GSBI6_UARTDM_IRQ			(GIC_SPI_START + 156)
-#define GSBI6_QUP_IRQ				(GIC_SPI_START + 157)
-#define GSBI7_UARTDM_IRQ			(GIC_SPI_START + 158)
-#define GSBI7_QUP_IRQ				(GIC_SPI_START + 159)
-#define GSBI8_UARTDM_IRQ			(GIC_SPI_START + 160)
-#define GSBI8_QUP_IRQ				(GIC_SPI_START + 161)
-#define TSIF_TSPP_IRQ				(GIC_SPI_START + 162)
-#define TSIF_BAM_IRQ				(GIC_SPI_START + 163)
-#define TSIF2_IRQ				(GIC_SPI_START + 164)
-#define TSIF1_IRQ				(GIC_SPI_START + 165)
-#define DSI2_IRQ				(GIC_SPI_START + 166)
-#define ISPIF_IRQ				(GIC_SPI_START + 167)
-#define MSMC_SC_SEC_TMR_IRQ			(GIC_SPI_START + 168)
-#define MSMC_SC_SEC_WDOG_BARK_IRQ		(GIC_SPI_START + 169)
-#define INT_ADM0_SCSS_0_IRQ			(GIC_SPI_START + 170)
-#define INT_ADM0_SCSS_1_IRQ			(GIC_SPI_START + 171)
-#define INT_ADM0_SCSS_2_IRQ			(GIC_SPI_START + 172)
-#define INT_ADM0_SCSS_3_IRQ			(GIC_SPI_START + 173)
-#define CC_SCSS_WDT1CPU1BITEEXPIRED		(GIC_SPI_START + 174)
-#define CC_SCSS_WDT1CPU0BITEEXPIRED		(GIC_SPI_START + 175)
-#define CC_SCSS_WDT0CPU1BITEEXPIRED		(GIC_SPI_START + 176)
-#define CC_SCSS_WDT0CPU0BITEEXPIRED		(GIC_SPI_START + 177)
-#define TSENS_UPPER_LOWER_INT			(GIC_SPI_START + 178)
-#define SSBI2_2_SC_CPU1_SECURE_INT		(GIC_SPI_START + 179)
-#define SSBI2_2_SC_CPU1_NON_SECURE_INT		(GIC_SPI_START + 180)
-#define SSBI2_1_SC_CPU1_SECURE_INT		(GIC_SPI_START + 181)
-#define SSBI2_1_SC_CPU1_NON_SECURE_INT		(GIC_SPI_START + 182)
-#define XPU_SUMMARY_IRQ				(GIC_SPI_START + 183)
-#define BUS_EXCEPTION_SUMMARY_IRQ		(GIC_SPI_START + 184)
-#define HSDDRX_EBI1CH0_IRQ			(GIC_SPI_START + 185)
-#define HSDDRX_EBI1CH1_IRQ			(GIC_SPI_START + 186)
-#define SDC5_BAM_IRQ				(GIC_SPI_START + 187)
-#define SDC5_IRQ_0				(GIC_SPI_START + 188)
-#define GSBI9_UARTDM_IRQ			(GIC_SPI_START + 189)
-#define GSBI9_QUP_IRQ				(GIC_SPI_START + 190)
-#define GSBI10_UARTDM_IRQ			(GIC_SPI_START + 191)
-#define GSBI10_QUP_IRQ				(GIC_SPI_START + 192)
-#define GSBI11_UARTDM_IRQ			(GIC_SPI_START + 193)
-#define GSBI11_QUP_IRQ				(GIC_SPI_START + 194)
-#define GSBI12_UARTDM_IRQ			(GIC_SPI_START + 195)
-#define GSBI12_QUP_IRQ				(GIC_SPI_START + 196)
-#define RIVA_APSS_LTECOEX_IRQ			(GIC_SPI_START + 197)
-#define RIVA_APSS_SPARE_IRQ			(GIC_SPI_START + 198)
-#define RIVA_APSS_WDOG_BITE_RESET_RDY_IRQ	(GIC_SPI_START + 199)
-#define RIVA_ASS_RESET_DONE_IRQ			(GIC_SPI_START + 200)
-#define RIVA_APSS_ASIC_IRQ			(GIC_SPI_START + 201)
-#define RIVA_APPS_WLAN_RX_DATA_AVAIL_IRQ	(GIC_SPI_START + 202)
-#define RIVA_APPS_WLAN_DATA_XFER_DONE_IRQ	(GIC_SPI_START + 203)
-#define RIVA_APPS_WLAM_SMSM_IRQ			(GIC_SPI_START + 204)
-#define RIVA_APPS_LOG_CTRL_IRQ			(GIC_SPI_START + 205)
-#define RIVA_APPS_FM_CTRL_IRQ			(GIC_SPI_START + 206)
-#define RIVA_APPS_HCI_IRQ			(GIC_SPI_START + 207)
-#define RIVA_APPS_WLAN_CTRL_IRQ			(GIC_SPI_START + 208)
-#define A2_BAM_IRQ				(GIC_SPI_START + 209)
-#define SMMU_GFX2D1_CB_SC_SECURE_IRQ		(GIC_SPI_START + 210)
-#define SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 211)
-#define GFX2D1_IRQ				(GIC_SPI_START + 212)
-#define PPSS_WDOG_TIMER_IRQ			(GIC_SPI_START + 213)
-#define SPS_SLIMBUS_CORE_EE0_IRQ		(GIC_SPI_START + 214)
-#define SPS_SLIMBUS_BAM_EE0_IRQ			(GIC_SPI_START + 215)
-#define QDSS_ETB_IRQ				(GIC_SPI_START + 216)
-#define QDSS_CTI2KPSS_CPU1_IRQ			(GIC_SPI_START + 217)
-#define QDSS_CTI2KPSS_CPU0_IRQ			(GIC_SPI_START + 218)
-#define TLMM_APCC_DIR_CONN_IRQ_16		(GIC_SPI_START + 219)
-#define TLMM_APCC_DIR_CONN_IRQ_17		(GIC_SPI_START + 220)
-#define TLMM_APCC_DIR_CONN_IRQ_18		(GIC_SPI_START + 221)
-#define TLMM_APCC_DIR_CONN_IRQ_19		(GIC_SPI_START + 222)
-#define TLMM_APCC_DIR_CONN_IRQ_20		(GIC_SPI_START + 223)
-#define TLMM_APCC_DIR_CONN_IRQ_21		(GIC_SPI_START + 224)
-#define PM8921_SEC_IRQ_104			(GIC_SPI_START + 225)
-#define PM8018_SEC_IRQ_107			(GIC_SPI_START + 226)
-
-/* For now, use the maximum number of interrupts until a pending GIC issue
- * is sorted out */
-#define NR_MSM_IRQS 1020
-#define NR_BOARD_IRQS 0
-#define NR_GPIO_IRQS 0
-
-#endif
-
diff --git a/arch/arm/mach-msm/include/mach/irqs-8x60.h b/arch/arm/mach-msm/include/mach/irqs-8x60.h
deleted file mode 100644
index f65841c..0000000
--- a/arch/arm/mach-msm/include/mach/irqs-8x60.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/* Copyright (c) 2010 Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IRQS_8X60_H
-#define __ASM_ARCH_MSM_IRQS_8X60_H
-
-/* MSM ACPU Interrupt Numbers */
-
-/* 0-15:  STI/SGI (software triggered/generated interrupts)
- * 16-31: PPI (private peripheral interrupts)
- * 32+:   SPI (shared peripheral interrupts)
- */
-
-#define GIC_PPI_START 16
-#define GIC_SPI_START 32
-
-#define INT_DEBUG_TIMER_EXP			(GIC_PPI_START + 0)
-#define INT_GP_TIMER_EXP			(GIC_PPI_START + 1)
-#define INT_GP_TIMER2_EXP			(GIC_PPI_START + 2)
-#define WDT0_ACCSCSSNBARK_INT			(GIC_PPI_START + 3)
-#define WDT1_ACCSCSSNBARK_INT			(GIC_PPI_START + 4)
-#define AVS_SVICINT				(GIC_PPI_START + 5)
-#define AVS_SVICINTSWDONE			(GIC_PPI_START + 6)
-#define CPU_DBGCPUXCOMMRXFULL			(GIC_PPI_START + 7)
-#define CPU_DBGCPUXCOMMTXEMPTY			(GIC_PPI_START + 8)
-#define CPU_SICCPUXPERFMONIRPTREQ		(GIC_PPI_START + 9)
-#define SC_AVSCPUXDOWN				(GIC_PPI_START + 10)
-#define SC_AVSCPUXUP				(GIC_PPI_START + 11)
-#define SC_SICCPUXACGIRPTREQ			(GIC_PPI_START + 12)
-/* PPI 13 to 15 are unused */
-
-
-#define SC_SICMPUIRPTREQ			(GIC_SPI_START + 0)
-#define SC_SICL2IRPTREQ				(GIC_SPI_START + 1)
-#define SC_SICL2ACGIRPTREQ			(GIC_SPI_START + 2)
-#define NC					(GIC_SPI_START + 3)
-#define TLMM_SCSS_DIR_CONN_IRQ_0		(GIC_SPI_START + 4)
-#define TLMM_SCSS_DIR_CONN_IRQ_1		(GIC_SPI_START + 5)
-#define TLMM_SCSS_DIR_CONN_IRQ_2		(GIC_SPI_START + 6)
-#define TLMM_SCSS_DIR_CONN_IRQ_3		(GIC_SPI_START + 7)
-#define TLMM_SCSS_DIR_CONN_IRQ_4		(GIC_SPI_START + 8)
-#define TLMM_SCSS_DIR_CONN_IRQ_5		(GIC_SPI_START + 9)
-#define TLMM_SCSS_DIR_CONN_IRQ_6		(GIC_SPI_START + 10)
-#define TLMM_SCSS_DIR_CONN_IRQ_7		(GIC_SPI_START + 11)
-#define TLMM_SCSS_DIR_CONN_IRQ_8		(GIC_SPI_START + 12)
-#define TLMM_SCSS_DIR_CONN_IRQ_9		(GIC_SPI_START + 13)
-#define PM8058_SEC_IRQ_N			(GIC_SPI_START + 14)
-#define PM8901_SEC_IRQ_N			(GIC_SPI_START + 15)
-#define TLMM_SCSS_SUMMARY_IRQ			(GIC_SPI_START + 16)
-#define SPDM_RT_1_IRQ				(GIC_SPI_START + 17)
-#define SPDM_DIAG_IRQ				(GIC_SPI_START + 18)
-#define RPM_SCSS_CPU0_GP_HIGH_IRQ		(GIC_SPI_START + 19)
-#define RPM_SCSS_CPU0_GP_MEDIUM_IRQ		(GIC_SPI_START + 20)
-#define RPM_SCSS_CPU0_GP_LOW_IRQ		(GIC_SPI_START + 21)
-#define RPM_SCSS_CPU0_WAKE_UP_IRQ		(GIC_SPI_START + 22)
-#define RPM_SCSS_CPU1_GP_HIGH_IRQ		(GIC_SPI_START + 23)
-#define RPM_SCSS_CPU1_GP_MEDIUM_IRQ		(GIC_SPI_START + 24)
-#define RPM_SCSS_CPU1_GP_LOW_IRQ		(GIC_SPI_START + 25)
-#define RPM_SCSS_CPU1_WAKE_UP_IRQ		(GIC_SPI_START + 26)
-#define SSBI2_2_SC_CPU0_SECURE_INT		(GIC_SPI_START + 27)
-#define SSBI2_2_SC_CPU0_NON_SECURE_INT		(GIC_SPI_START + 28)
-#define SSBI2_1_SC_CPU0_SECURE_INT		(GIC_SPI_START + 29)
-#define SSBI2_1_SC_CPU0_NON_SECURE_INT		(GIC_SPI_START + 30)
-#define MSMC_SC_SEC_CE_IRQ			(GIC_SPI_START + 31)
-#define MSMC_SC_PRI_CE_IRQ			(GIC_SPI_START + 32)
-#define MARM_FIQ				(GIC_SPI_START + 33)
-#define MARM_IRQ				(GIC_SPI_START + 34)
-#define MARM_L2CC_IRQ				(GIC_SPI_START + 35)
-#define MARM_WDOG_EXPIRED			(GIC_SPI_START + 36)
-#define MARM_SCSS_GP_IRQ_0			(GIC_SPI_START + 37)
-#define MARM_SCSS_GP_IRQ_1			(GIC_SPI_START + 38)
-#define MARM_SCSS_GP_IRQ_2			(GIC_SPI_START + 39)
-#define MARM_SCSS_GP_IRQ_3			(GIC_SPI_START + 40)
-#define MARM_SCSS_GP_IRQ_4			(GIC_SPI_START + 41)
-#define MARM_SCSS_GP_IRQ_5			(GIC_SPI_START + 42)
-#define MARM_SCSS_GP_IRQ_6			(GIC_SPI_START + 43)
-#define MARM_SCSS_GP_IRQ_7			(GIC_SPI_START + 44)
-#define MARM_SCSS_GP_IRQ_8			(GIC_SPI_START + 45)
-#define MARM_SCSS_GP_IRQ_9			(GIC_SPI_START + 46)
-#define VPE_IRQ					(GIC_SPI_START + 47)
-#define VFE_IRQ					(GIC_SPI_START + 48)
-#define VCODEC_IRQ				(GIC_SPI_START + 49)
-#define TV_ENC_IRQ				(GIC_SPI_START + 50)
-#define SMMU_VPE_CB_SC_SECURE_IRQ		(GIC_SPI_START + 51)
-#define SMMU_VPE_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 52)
-#define SMMU_VFE_CB_SC_SECURE_IRQ		(GIC_SPI_START + 53)
-#define SMMU_VFE_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 54)
-#define SMMU_VCODEC_B_CB_SC_SECURE_IRQ		(GIC_SPI_START + 55)
-#define SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 56)
-#define SMMU_VCODEC_A_CB_SC_SECURE_IRQ		(GIC_SPI_START + 57)
-#define SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 58)
-#define SMMU_ROT_CB_SC_SECURE_IRQ		(GIC_SPI_START + 59)
-#define SMMU_ROT_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 60)
-#define SMMU_MDP1_CB_SC_SECURE_IRQ		(GIC_SPI_START + 61)
-#define SMMU_MDP1_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 62)
-#define SMMU_MDP0_CB_SC_SECURE_IRQ		(GIC_SPI_START + 63)
-#define SMMU_MDP0_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 64)
-#define SMMU_JPEGD_CB_SC_SECURE_IRQ		(GIC_SPI_START + 65)
-#define SMMU_JPEGD_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 66)
-#define SMMU_IJPEG_CB_SC_SECURE_IRQ		(GIC_SPI_START + 67)
-#define SMMU_IJPEG_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 68)
-#define SMMU_GFX3D_CB_SC_SECURE_IRQ		(GIC_SPI_START + 69)
-#define SMMU_GFX3D_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 70)
-#define SMMU_GFX2D0_CB_SC_SECURE_IRQ		(GIC_SPI_START + 71)
-#define SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 72)
-#define ROT_IRQ					(GIC_SPI_START + 73)
-#define MMSS_FABRIC_IRQ				(GIC_SPI_START + 74)
-#define MDP_IRQ					(GIC_SPI_START + 75)
-#define JPEGD_IRQ				(GIC_SPI_START + 76)
-#define JPEG_IRQ				(GIC_SPI_START + 77)
-#define MMSS_IMEM_IRQ				(GIC_SPI_START + 78)
-#define HDMI_IRQ				(GIC_SPI_START + 79)
-#define GFX3D_IRQ				(GIC_SPI_START + 80)
-#define GFX2D0_IRQ				(GIC_SPI_START + 81)
-#define DSI_IRQ					(GIC_SPI_START + 82)
-#define CSI_1_IRQ				(GIC_SPI_START + 83)
-#define CSI_0_IRQ				(GIC_SPI_START + 84)
-#define LPASS_SCSS_AUDIO_IF_OUT0_IRQ		(GIC_SPI_START + 85)
-#define LPASS_SCSS_MIDI_IRQ			(GIC_SPI_START + 86)
-#define LPASS_Q6SS_WDOG_EXPIRED			(GIC_SPI_START + 87)
-#define LPASS_SCSS_GP_LOW_IRQ			(GIC_SPI_START + 88)
-#define LPASS_SCSS_GP_MEDIUM_IRQ		(GIC_SPI_START + 89)
-#define LPASS_SCSS_GP_HIGH_IRQ			(GIC_SPI_START + 90)
-#define TOP_IMEM_IRQ				(GIC_SPI_START + 91)
-#define FABRIC_SYS_IRQ				(GIC_SPI_START + 92)
-#define FABRIC_APPS_IRQ				(GIC_SPI_START + 93)
-#define USB1_HS_BAM_IRQ				(GIC_SPI_START + 94)
-#define SDC4_BAM_IRQ				(GIC_SPI_START + 95)
-#define SDC3_BAM_IRQ				(GIC_SPI_START + 96)
-#define SDC2_BAM_IRQ				(GIC_SPI_START + 97)
-#define SDC1_BAM_IRQ				(GIC_SPI_START + 98)
-#define FABRIC_SPS_IRQ				(GIC_SPI_START + 99)
-#define USB1_HS_IRQ				(GIC_SPI_START + 100)
-#define SDC4_IRQ_0				(GIC_SPI_START + 101)
-#define SDC3_IRQ_0				(GIC_SPI_START + 102)
-#define SDC2_IRQ_0				(GIC_SPI_START + 103)
-#define SDC1_IRQ_0				(GIC_SPI_START + 104)
-#define SPS_BAM_DMA_IRQ				(GIC_SPI_START + 105)
-#define SPS_SEC_VIOL_IRQ			(GIC_SPI_START + 106)
-#define SPS_MTI_0				(GIC_SPI_START + 107)
-#define SPS_MTI_1				(GIC_SPI_START + 108)
-#define SPS_MTI_2				(GIC_SPI_START + 109)
-#define SPS_MTI_3				(GIC_SPI_START + 110)
-#define SPS_MTI_4				(GIC_SPI_START + 111)
-#define SPS_MTI_5				(GIC_SPI_START + 112)
-#define SPS_MTI_6				(GIC_SPI_START + 113)
-#define SPS_MTI_7				(GIC_SPI_START + 114)
-#define SPS_MTI_8				(GIC_SPI_START + 115)
-#define SPS_MTI_9				(GIC_SPI_START + 116)
-#define SPS_MTI_10				(GIC_SPI_START + 117)
-#define SPS_MTI_11				(GIC_SPI_START + 118)
-#define SPS_MTI_12				(GIC_SPI_START + 119)
-#define SPS_MTI_13				(GIC_SPI_START + 120)
-#define SPS_MTI_14				(GIC_SPI_START + 121)
-#define SPS_MTI_15				(GIC_SPI_START + 122)
-#define SPS_MTI_16				(GIC_SPI_START + 123)
-#define SPS_MTI_17				(GIC_SPI_START + 124)
-#define SPS_MTI_18				(GIC_SPI_START + 125)
-#define SPS_MTI_19				(GIC_SPI_START + 126)
-#define SPS_MTI_20				(GIC_SPI_START + 127)
-#define SPS_MTI_21				(GIC_SPI_START + 128)
-#define SPS_MTI_22				(GIC_SPI_START + 129)
-#define SPS_MTI_23				(GIC_SPI_START + 130)
-#define SPS_MTI_24				(GIC_SPI_START + 131)
-#define SPS_MTI_25				(GIC_SPI_START + 132)
-#define SPS_MTI_26				(GIC_SPI_START + 133)
-#define SPS_MTI_27				(GIC_SPI_START + 134)
-#define SPS_MTI_28				(GIC_SPI_START + 135)
-#define SPS_MTI_29				(GIC_SPI_START + 136)
-#define SPS_MTI_30				(GIC_SPI_START + 137)
-#define SPS_MTI_31				(GIC_SPI_START + 138)
-#define UXMC_EBI2_WR_ER_DONE_IRQ		(GIC_SPI_START + 139)
-#define UXMC_EBI2_OP_DONE_IRQ			(GIC_SPI_START + 140)
-#define USB2_IRQ				(GIC_SPI_START + 141)
-#define USB1_IRQ				(GIC_SPI_START + 142)
-#define TSSC_SSBI_IRQ				(GIC_SPI_START + 143)
-#define TSSC_SAMPLE_IRQ				(GIC_SPI_START + 144)
-#define TSSC_PENUP_IRQ				(GIC_SPI_START + 145)
-#define INT_UART1DM_IRQ				(GIC_SPI_START + 146)
-#define GSBI1_QUP_IRQ				(GIC_SPI_START + 147)
-#define INT_UART2DM_IRQ				(GIC_SPI_START + 148)
-#define GSBI2_QUP_IRQ				(GIC_SPI_START + 149)
-#define INT_UART3DM_IRQ				(GIC_SPI_START + 150)
-#define GSBI3_QUP_IRQ				(GIC_SPI_START + 151)
-#define INT_UART4DM_IRQ				(GIC_SPI_START + 152)
-#define GSBI4_QUP_IRQ				(GIC_SPI_START + 153)
-#define INT_UART5DM_IRQ				(GIC_SPI_START + 154)
-#define GSBI5_QUP_IRQ				(GIC_SPI_START + 155)
-#define INT_UART6DM_IRQ				(GIC_SPI_START + 156)
-#define GSBI6_QUP_IRQ				(GIC_SPI_START + 157)
-#define INT_UART7DM_IRQ				(GIC_SPI_START + 158)
-#define GSBI7_QUP_IRQ				(GIC_SPI_START + 159)
-#define INT_UART8DM_IRQ				(GIC_SPI_START + 160)
-#define GSBI8_QUP_IRQ				(GIC_SPI_START + 161)
-#define TSIF_TSPP_IRQ				(GIC_SPI_START + 162)
-#define TSIF_BAM_IRQ				(GIC_SPI_START + 163)
-#define TSIF2_IRQ				(GIC_SPI_START + 164)
-#define TSIF1_IRQ				(GIC_SPI_START + 165)
-#define INT_ADM1_MASTER				(GIC_SPI_START + 166)
-#define INT_ADM1_AARM				(GIC_SPI_START + 167)
-#define INT_ADM1_SD2				(GIC_SPI_START + 168)
-#define INT_ADM1_SD3				(GIC_SPI_START + 169)
-#define INT_ADM0_MASTER				(GIC_SPI_START + 170)
-#define INT_ADM0_AARM				(GIC_SPI_START + 171)
-#define INT_ADM0_SD2				(GIC_SPI_START + 172)
-#define INT_ADM0_SD3				(GIC_SPI_START + 173)
-#define CC_SCSS_WDT1CPU1BITEEXPIRED		(GIC_SPI_START + 174)
-#define CC_SCSS_WDT1CPU0BITEEXPIRED		(GIC_SPI_START + 175)
-#define CC_SCSS_WDT0CPU1BITEEXPIRED		(GIC_SPI_START + 176)
-#define CC_SCSS_WDT0CPU0BITEEXPIRED		(GIC_SPI_START + 177)
-#define TSENS_UPPER_LOWER_INT			(GIC_SPI_START + 178)
-#define SSBI2_2_SC_CPU1_SECURE_INT		(GIC_SPI_START + 179)
-#define SSBI2_2_SC_CPU1_NON_SECURE_INT		(GIC_SPI_START + 180)
-#define SSBI2_1_SC_CPU1_SECURE_INT		(GIC_SPI_START + 181)
-#define SSBI2_1_SC_CPU1_NON_SECURE_INT		(GIC_SPI_START + 182)
-#define XPU_SUMMARY_IRQ				(GIC_SPI_START + 183)
-#define BUS_EXCEPTION_SUMMARY_IRQ		(GIC_SPI_START + 184)
-#define HSDDRX_SMICH0_IRQ			(GIC_SPI_START + 185)
-#define HSDDRX_EBI1_IRQ				(GIC_SPI_START + 186)
-#define SDC5_BAM_IRQ				(GIC_SPI_START + 187)
-#define SDC5_IRQ_0				(GIC_SPI_START + 188)
-#define INT_UART9DM_IRQ				(GIC_SPI_START + 189)
-#define GSBI9_QUP_IRQ				(GIC_SPI_START + 190)
-#define INT_UART10DM_IRQ			(GIC_SPI_START + 191)
-#define GSBI10_QUP_IRQ				(GIC_SPI_START + 192)
-#define INT_UART11DM_IRQ			(GIC_SPI_START + 193)
-#define GSBI11_QUP_IRQ				(GIC_SPI_START + 194)
-#define INT_UART12DM_IRQ			(GIC_SPI_START + 195)
-#define GSBI12_QUP_IRQ				(GIC_SPI_START + 196)
-
-/*SPI 197 to 209 arent used in 8x60*/
-#define SMMU_GFX2D1_CB_SC_SECURE_IRQ            (GIC_SPI_START + 210)
-#define SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ        (GIC_SPI_START + 211)
-
-/*SPI 212 to 216 arent used in 8x60*/
-#define SMPSS_SPARE_1				(GIC_SPI_START + 217)
-#define SMPSS_SPARE_2				(GIC_SPI_START + 218)
-#define SMPSS_SPARE_3				(GIC_SPI_START + 219)
-#define SMPSS_SPARE_4				(GIC_SPI_START + 220)
-#define SMPSS_SPARE_5				(GIC_SPI_START + 221)
-#define SMPSS_SPARE_6				(GIC_SPI_START + 222)
-#define SMPSS_SPARE_7				(GIC_SPI_START + 223)
-
-#define NR_GPIO_IRQS 173
-#define NR_MSM_IRQS 256
-#define NR_BOARD_IRQS 0
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/irqs.h b/arch/arm/mach-msm/include/mach/irqs.h
index 3cd78b1..164d355 100644
--- a/arch/arm/mach-msm/include/mach/irqs.h
+++ b/arch/arm/mach-msm/include/mach/irqs.h
@@ -24,11 +24,6 @@
 #elif defined(CONFIG_ARCH_QSD8X50)
 #include "irqs-8x50.h"
 #include "sirc.h"
-#elif defined(CONFIG_ARCH_MSM8X60)
-#include "irqs-8x60.h"
-#elif defined(CONFIG_ARCH_MSM8960)
-/* TODO: Make these not generic. */
-#include "irqs-8960.h"
 #elif defined(CONFIG_ARCH_MSM_ARM11)
 #include "irqs-7x00.h"
 #else
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
deleted file mode 100644
index 7bca8d7..0000000
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * The MSM peripherals are spread all over across 768MB of physical
- * space, which makes just having a simple IO_ADDRESS macro to slide
- * them into the right virtual location rough.  Instead, we will
- * provide a master phys->virt mapping for peripherals here.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IOMAP_8960_H
-#define __ASM_ARCH_MSM_IOMAP_8960_H
-
-/* Physical base address and size of peripherals.
- * Ordered by the virtual base addresses they will be mapped at.
- *
- * If you add or remove entries here, you'll want to edit the
- * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
- * changes.
- *
- */
-
-#define MSM8960_TMR_PHYS	0x0200A000
-#define MSM8960_TMR_SIZE	SZ_4K
-
-#define MSM8960_TMR0_PHYS	0x0208A000
-#define MSM8960_TMR0_SIZE	SZ_4K
-
-#ifdef CONFIG_DEBUG_MSM8960_UART
-#define MSM_DEBUG_UART_BASE	0xF0040000
-#define MSM_DEBUG_UART_PHYS	0x16440000
-#endif
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
deleted file mode 100644
index 75a7b62..0000000
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * The MSM peripherals are spread all over across 768MB of physical
- * space, which makes just having a simple IO_ADDRESS macro to slide
- * them into the right virtual location rough.  Instead, we will
- * provide a master phys->virt mapping for peripherals here.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IOMAP_8X60_H
-#define __ASM_ARCH_MSM_IOMAP_8X60_H
-
-/* Physical base address and size of peripherals.
- * Ordered by the virtual base addresses they will be mapped at.
- *
- * MSM_VIC_BASE must be an value that can be loaded via a "mov"
- * instruction, otherwise entry-macro.S will not compile.
- *
- * If you add or remove entries here, you'll want to edit the
- * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
- * changes.
- *
- */
-
-#define MSM_TLMM_BASE		IOMEM(0xF0004000)
-#define MSM_TLMM_PHYS		0x00800000
-#define MSM_TLMM_SIZE		SZ_16K
-
-#define MSM8X60_TMR_PHYS	0x02000000
-#define MSM8X60_TMR_SIZE	SZ_4K
-
-#define MSM8X60_TMR0_PHYS	0x02040000
-#define MSM8X60_TMR0_SIZE	SZ_4K
-
-#ifdef CONFIG_DEBUG_MSM8660_UART
-#define MSM_DEBUG_UART_BASE	0xF0040000
-#define MSM_DEBUG_UART_PHYS	0x19C40000
-#endif
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h
index c56e81f..0e4f491 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap.h
@@ -45,25 +45,8 @@
 #include "msm_iomap-7x00.h"
 #endif
 
-#include "msm_iomap-8x60.h"
-#include "msm_iomap-8960.h"
-
-#define MSM_DEBUG_UART_SIZE	SZ_4K
-#if defined(CONFIG_DEBUG_MSM_UART1)
-#define MSM_DEBUG_UART_BASE	0xE1000000
-#define MSM_DEBUG_UART_PHYS	MSM_UART1_PHYS
-#elif defined(CONFIG_DEBUG_MSM_UART2)
-#define MSM_DEBUG_UART_BASE	0xE1000000
-#define MSM_DEBUG_UART_PHYS	MSM_UART2_PHYS
-#elif defined(CONFIG_DEBUG_MSM_UART3)
-#define MSM_DEBUG_UART_BASE	0xE1000000
-#define MSM_DEBUG_UART_PHYS	MSM_UART3_PHYS
-#endif
-
 /* Virtual addresses shared across all MSM targets. */
 #define MSM_CSR_BASE		IOMEM(0xE0001000)
-#define MSM_TMR_BASE		IOMEM(0xF0200000)
-#define MSM_TMR0_BASE		IOMEM(0xF0201000)
 #define MSM_GPIO1_BASE		IOMEM(0xE0003000)
 #define MSM_GPIO2_BASE		IOMEM(0xE0004000)
 
diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h
deleted file mode 100644
index 9432487..0000000
--- a/arch/arm/mach-msm/include/mach/uncompress.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_UNCOMPRESS_H
-#define __ASM_ARCH_MSM_UNCOMPRESS_H
-
-#include <asm/barrier.h>
-#include <asm/processor.h>
-#include <mach/msm_iomap.h>
-
-#define UART_CSR      (*(volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x08))
-#define UART_TF       (*(volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x0c))
-
-#define UART_DM_SR    (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x08)))
-#define UART_DM_CR    (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x10)))
-#define UART_DM_ISR   (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x14)))
-#define UART_DM_NCHAR (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x40)))
-#define UART_DM_TF    (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x70)))
-
-static void putc(int c)
-{
-#if defined(MSM_DEBUG_UART_PHYS)
-#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
-	/*
-	 * Wait for TX_READY to be set; but skip it if we have a
-	 * TX underrun.
-	 */
-	if (!(UART_DM_SR & 0x08))
-		while (!(UART_DM_ISR & 0x80))
-			cpu_relax();
-
-	UART_DM_CR = 0x300;
-	UART_DM_NCHAR = 0x1;
-	UART_DM_TF = c;
-#else
-	while (!(UART_CSR & 0x04))
-		cpu_relax();
-	UART_TF = c;
-#endif
-#endif
-}
-
-static inline void flush(void)
-{
-}
-
-static inline void arch_decomp_setup(void)
-{
-}
-
-#endif
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index 3dc04cc..adc8971 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -18,6 +18,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/bug.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/export.h>
@@ -27,8 +28,6 @@
 #include <mach/msm_iomap.h>
 #include <asm/mach/map.h>
 
-#include <mach/board.h>
-
 #include "common.h"
 
 #define MSM_CHIP_DEVICE_TYPE(name, chip, mem_type) {			      \
@@ -52,26 +51,38 @@ static struct map_desc msm_io_desc[] __initdata = {
 	MSM_CHIP_DEVICE_TYPE(GPIO1, MSM7X00, MT_DEVICE_NONSHARED),
 	MSM_CHIP_DEVICE_TYPE(GPIO2, MSM7X00, MT_DEVICE_NONSHARED),
 	MSM_DEVICE_TYPE(CLK_CTL, MT_DEVICE_NONSHARED),
-#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
-	defined(CONFIG_DEBUG_MSM_UART3)
-	MSM_DEVICE_TYPE(DEBUG_UART, MT_DEVICE_NONSHARED),
-#endif
 	{
 		.virtual =  (unsigned long) MSM_SHARED_RAM_BASE,
 		.pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
 		.length =   MSM_SHARED_RAM_SIZE,
 		.type =     MT_DEVICE,
 	},
+#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
+		defined(CONFIG_DEBUG_MSM_UART3)
+	{
+		/* Must be last: virtual and pfn filled in by debug_ll_addr() */
+		.length = SZ_4K,
+		.type = MT_DEVICE_NONSHARED,
+	}
+#endif
 };
 
 void __init msm_map_common_io(void)
 {
+	size_t size = ARRAY_SIZE(msm_io_desc);
+
 	/* Make sure the peripheral register window is closed, since
 	 * we will use PTE flags (TEX[1]=1,B=0,C=1) to determine which
 	 * pages are peripheral interface or not.
 	 */
 	asm("mcr p15, 0, %0, c15, c2, 4" : : "r" (0));
-	iotable_init(msm_io_desc, ARRAY_SIZE(msm_io_desc));
+#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
+		defined(CONFIG_DEBUG_MSM_UART3)
+	debug_ll_addr(&msm_io_desc[size - 1].pfn,
+		      &msm_io_desc[size - 1].virtual);
+	msm_io_desc[size - 1].pfn = __phys_to_pfn(msm_io_desc[size - 1].pfn);
+#endif
+	iotable_init(msm_io_desc, size);
 }
 #endif
 
@@ -87,10 +98,6 @@ static struct map_desc qsd8x50_io_desc[] __initdata = {
 	MSM_DEVICE(SCPLL),
 	MSM_DEVICE(AD5),
 	MSM_DEVICE(MDC),
-#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
-	defined(CONFIG_DEBUG_MSM_UART3)
-	MSM_DEVICE(DEBUG_UART),
-#endif
 	{
 		.virtual =  (unsigned long) MSM_SHARED_RAM_BASE,
 		.pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
@@ -101,40 +108,11 @@ static struct map_desc qsd8x50_io_desc[] __initdata = {
 
 void __init msm_map_qsd8x50_io(void)
 {
+	debug_ll_io_init();
 	iotable_init(qsd8x50_io_desc, ARRAY_SIZE(qsd8x50_io_desc));
 }
 #endif /* CONFIG_ARCH_QSD8X50 */
 
-#ifdef CONFIG_ARCH_MSM8X60
-static struct map_desc msm8x60_io_desc[] __initdata = {
-	MSM_CHIP_DEVICE(TMR, MSM8X60),
-	MSM_CHIP_DEVICE(TMR0, MSM8X60),
-#ifdef CONFIG_DEBUG_MSM8660_UART
-	MSM_DEVICE(DEBUG_UART),
-#endif
-};
-
-void __init msm_map_msm8x60_io(void)
-{
-	iotable_init(msm8x60_io_desc, ARRAY_SIZE(msm8x60_io_desc));
-}
-#endif /* CONFIG_ARCH_MSM8X60 */
-
-#ifdef CONFIG_ARCH_MSM8960
-static struct map_desc msm8960_io_desc[] __initdata = {
-	MSM_CHIP_DEVICE(TMR, MSM8960),
-	MSM_CHIP_DEVICE(TMR0, MSM8960),
-#ifdef CONFIG_DEBUG_MSM8960_UART
-	MSM_DEVICE(DEBUG_UART),
-#endif
-};
-
-void __init msm_map_msm8960_io(void)
-{
-	iotable_init(msm8960_io_desc, ARRAY_SIZE(msm8960_io_desc));
-}
-#endif /* CONFIG_ARCH_MSM8960 */
-
 #ifdef CONFIG_ARCH_MSM7X30
 static struct map_desc msm7x30_io_desc[] __initdata = {
 	MSM_DEVICE(VIC),
@@ -150,10 +128,6 @@ static struct map_desc msm7x30_io_desc[] __initdata = {
 	MSM_DEVICE(SAW),
 	MSM_DEVICE(GCC),
 	MSM_DEVICE(TCSR),
-#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
-	defined(CONFIG_DEBUG_MSM_UART3)
-	MSM_DEVICE(DEBUG_UART),
-#endif
 	{
 		.virtual =  (unsigned long) MSM_SHARED_RAM_BASE,
 		.pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
@@ -164,10 +138,12 @@ static struct map_desc msm7x30_io_desc[] __initdata = {
 
 void __init msm_map_msm7x30_io(void)
 {
+	debug_ll_io_init();
 	iotable_init(msm7x30_io_desc, ARRAY_SIZE(msm7x30_io_desc));
 }
 #endif /* CONFIG_ARCH_MSM7X30 */
 
+#ifdef CONFIG_ARCH_MSM7X00A
 void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size,
 				   unsigned int mtype, void *caller)
 {
@@ -182,3 +158,4 @@ void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size,
 
 	return __arm_ioremap_caller(phys_addr, size, mtype, caller);
 }
+#endif
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 8697cfc..696fb73 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -16,6 +16,7 @@
 
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
+#include <linux/cpu.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
@@ -26,7 +27,6 @@
 #include <linux/sched_clock.h>
 
 #include <asm/mach/time.h>
-#include <asm/localtimer.h>
 
 #include "common.h"
 
@@ -49,7 +49,7 @@ static void __iomem *sts_base;
 
 static irqreturn_t msm_timer_interrupt(int irq, void *dev_id)
 {
-	struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
+	struct clock_event_device *evt = dev_id;
 	/* Stop the timer tick */
 	if (evt->mode == CLOCK_EVT_MODE_ONESHOT) {
 		u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
@@ -101,18 +101,7 @@ static void msm_timer_set_mode(enum clock_event_mode mode,
 	writel_relaxed(ctrl, event_base + TIMER_ENABLE);
 }
 
-static struct clock_event_device msm_clockevent = {
-	.name		= "gp_timer",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 200,
-	.set_next_event	= msm_timer_set_next_event,
-	.set_mode	= msm_timer_set_mode,
-};
-
-static union {
-	struct clock_event_device *evt;
-	struct clock_event_device * __percpu *percpu_evt;
-} msm_evt;
+static struct clock_event_device __percpu *msm_evt;
 
 static void __iomem *source_base;
 
@@ -138,23 +127,34 @@ static struct clocksource msm_clocksource = {
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-#ifdef CONFIG_LOCAL_TIMERS
+static int msm_timer_irq;
+static int msm_timer_has_ppi;
+
 static int msm_local_timer_setup(struct clock_event_device *evt)
 {
-	/* Use existing clock_event for cpu 0 */
-	if (!smp_processor_id())
-		return 0;
-
-	evt->irq = msm_clockevent.irq;
-	evt->name = "local_timer";
-	evt->features = msm_clockevent.features;
-	evt->rating = msm_clockevent.rating;
+	int cpu = smp_processor_id();
+	int err;
+
+	evt->irq = msm_timer_irq;
+	evt->name = "msm_timer";
+	evt->features = CLOCK_EVT_FEAT_ONESHOT;
+	evt->rating = 200;
 	evt->set_mode = msm_timer_set_mode;
 	evt->set_next_event = msm_timer_set_next_event;
+	evt->cpumask = cpumask_of(cpu);
+
+	clockevents_config_and_register(evt, GPT_HZ, 4, 0xffffffff);
+
+	if (msm_timer_has_ppi) {
+		enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING);
+	} else {
+		err = request_irq(evt->irq, msm_timer_interrupt,
+				IRQF_TIMER | IRQF_NOBALANCING |
+				IRQF_TRIGGER_RISING, "gp_timer", evt);
+		if (err)
+			pr_err("request_irq failed\n");
+	}
 
-	*__this_cpu_ptr(msm_evt.percpu_evt) = evt;
-	clockevents_config_and_register(evt, GPT_HZ, 4, 0xf0000000);
-	enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING);
 	return 0;
 }
 
@@ -164,11 +164,28 @@ static void msm_local_timer_stop(struct clock_event_device *evt)
 	disable_percpu_irq(evt->irq);
 }
 
-static struct local_timer_ops msm_local_timer_ops = {
-	.setup	= msm_local_timer_setup,
-	.stop	= msm_local_timer_stop,
+static int msm_timer_cpu_notify(struct notifier_block *self,
+					   unsigned long action, void *hcpu)
+{
+	/*
+	 * Grab cpu pointer in each case to avoid spurious
+	 * preemptible warnings
+	 */
+	switch (action & ~CPU_TASKS_FROZEN) {
+	case CPU_STARTING:
+		msm_local_timer_setup(this_cpu_ptr(msm_evt));
+		break;
+	case CPU_DYING:
+		msm_local_timer_stop(this_cpu_ptr(msm_evt));
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block msm_timer_cpu_nb = {
+	.notifier_call = msm_timer_cpu_notify,
 };
-#endif /* CONFIG_LOCAL_TIMERS */
 
 static notrace u32 msm_sched_clock_read(void)
 {
@@ -178,38 +195,35 @@ static notrace u32 msm_sched_clock_read(void)
 static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq,
 				  bool percpu)
 {
-	struct clock_event_device *ce = &msm_clockevent;
 	struct clocksource *cs = &msm_clocksource;
-	int res;
+	int res = 0;
+
+	msm_timer_irq = irq;
+	msm_timer_has_ppi = percpu;
+
+	msm_evt = alloc_percpu(struct clock_event_device);
+	if (!msm_evt) {
+		pr_err("memory allocation failed for clockevents\n");
+		goto err;
+	}
 
-	ce->cpumask = cpumask_of(0);
-	ce->irq = irq;
+	if (percpu)
+		res = request_percpu_irq(irq, msm_timer_interrupt,
+					 "gp_timer", msm_evt);
 
-	clockevents_config_and_register(ce, GPT_HZ, 4, 0xffffffff);
-	if (percpu) {
-		msm_evt.percpu_evt = alloc_percpu(struct clock_event_device *);
-		if (!msm_evt.percpu_evt) {
-			pr_err("memory allocation failed for %s\n", ce->name);
+	if (res) {
+		pr_err("request_percpu_irq failed\n");
+	} else {
+		res = register_cpu_notifier(&msm_timer_cpu_nb);
+		if (res) {
+			free_percpu_irq(irq, msm_evt);
 			goto err;
 		}
-		*__this_cpu_ptr(msm_evt.percpu_evt) = ce;
-		res = request_percpu_irq(ce->irq, msm_timer_interrupt,
-					 ce->name, msm_evt.percpu_evt);
-		if (!res) {
-			enable_percpu_irq(ce->irq, IRQ_TYPE_EDGE_RISING);
-#ifdef CONFIG_LOCAL_TIMERS
-			local_timer_register(&msm_local_timer_ops);
-#endif
-		}
-	} else {
-		msm_evt.evt = ce;
-		res = request_irq(ce->irq, msm_timer_interrupt,
-				  IRQF_TIMER | IRQF_NOBALANCING |
-				  IRQF_TRIGGER_RISING, ce->name, &msm_evt.evt);
+
+		/* Immediately configure the timer on the boot CPU */
+		msm_local_timer_setup(__this_cpu_ptr(msm_evt));
 	}
 
-	if (res)
-		pr_err("request_irq failed for %s\n", ce->name);
 err:
 	writel_relaxed(TIMER_ENABLE_EN, source_base + TIMER_ENABLE);
 	res = clocksource_register_hz(cs, dgt_hz);
@@ -219,15 +233,8 @@ err:
 }
 
 #ifdef CONFIG_OF
-static const struct of_device_id msm_timer_match[] __initconst = {
-	{ .compatible = "qcom,kpss-timer" },
-	{ .compatible = "qcom,scss-timer" },
-	{ },
-};
-
-void __init msm_dt_timer_init(void)
+static void __init msm_dt_timer_init(struct device_node *np)
 {
-	struct device_node *np;
 	u32 freq;
 	int irq;
 	struct resource res;
@@ -235,12 +242,6 @@ void __init msm_dt_timer_init(void)
 	void __iomem *base;
 	void __iomem *cpu0_base;
 
-	np = of_find_matching_node(NULL, msm_timer_match);
-	if (!np) {
-		pr_err("Can't find msm timer DT node\n");
-		return;
-	}
-
 	base = of_iomap(np, 0);
 	if (!base) {
 		pr_err("Failed to map event base\n");
@@ -283,6 +284,8 @@ void __init msm_dt_timer_init(void)
 
 	msm_timer_init(freq, 32, irq, !!percpu_offset);
 }
+CLOCKSOURCE_OF_DECLARE(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init);
+CLOCKSOURCE_OF_DECLARE(scss_timer, "qcom,scss-timer", msm_dt_timer_init);
 #endif
 
 static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source,
diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
deleted file mode 100644
index a7df02b..0000000
--- a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <mach/mv78xx0.h>
-
-	.macro	addruart, rp, rv, tmp
-	ldr	\rp, =MV78XX0_REGS_PHYS_BASE
-	ldr	\rv, =MV78XX0_REGS_VIRT_BASE
-	orr	\rp, \rp, #0x00012000
-	orr	\rv, \rv, #0x00012000
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index dc26a65..445e553 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -18,6 +18,11 @@
 #include <mach/mv78xx0.h>
 #include "common.h"
 
+#define MV78XX0_MBUS_PCIE_MEM_TARGET(port, lane) ((port) ? 8 : 4)
+#define MV78XX0_MBUS_PCIE_MEM_ATTR(port, lane)   (0xf8 & ~(0x10 << (lane)))
+#define MV78XX0_MBUS_PCIE_IO_TARGET(port, lane)  ((port) ? 8 : 4)
+#define MV78XX0_MBUS_PCIE_IO_ATTR(port, lane)    (0xf0 & ~(0x10 << (lane)))
+
 struct pcie_port {
 	u8			maj;
 	u8			min;
@@ -71,7 +76,6 @@ static void __init mv78xx0_pcie_preinit(void)
 	start = MV78XX0_PCIE_MEM_PHYS_BASE;
 	for (i = 0; i < num_pcie_ports; i++) {
 		struct pcie_port *pp = pcie_port + i;
-		char winname[MVEBU_MBUS_MAX_WINNAME_SZ];
 
 		snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
 			"PCIe %d.%d MEM", pp->maj, pp->min);
@@ -85,17 +89,12 @@ static void __init mv78xx0_pcie_preinit(void)
 		if (request_resource(&iomem_resource, &pp->res))
 			panic("can't allocate PCIe MEM sub-space");
 
-		snprintf(winname, sizeof(winname), "pcie%d.%d",
-			 pp->maj, pp->min);
-
-		mvebu_mbus_add_window_remap_flags(winname,
-						  pp->res.start,
-						  resource_size(&pp->res),
-						  MVEBU_MBUS_NO_REMAP,
-						  MVEBU_MBUS_PCI_MEM);
-		mvebu_mbus_add_window_remap_flags(winname,
-						  i * SZ_64K, SZ_64K,
-						  0, MVEBU_MBUS_PCI_IO);
+		mvebu_mbus_add_window_by_id(MV78XX0_MBUS_PCIE_MEM_TARGET(pp->maj, pp->min),
+					    MV78XX0_MBUS_PCIE_MEM_ATTR(pp->maj, pp->min),
+					    pp->res.start, resource_size(&pp->res));
+		mvebu_mbus_add_window_remap_by_id(MV78XX0_MBUS_PCIE_IO_TARGET(pp->maj, pp->min),
+						  MV78XX0_MBUS_PCIE_IO_ATTR(pp->maj, pp->min),
+						  i * SZ_64K, SZ_64K, 0);
 	}
 }
 
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
index 97cbb80..e2acff9 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ b/arch/arm/mach-mvebu/armada-370-xp.c
@@ -18,7 +18,7 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/io.h>
-#include <linux/time-armada-370-xp.h>
+#include <linux/clocksource.h>
 #include <linux/dma-mapping.h>
 #include <linux/mbus.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -34,44 +34,12 @@ static void __init armada_370_xp_map_io(void)
 	debug_ll_io_init();
 }
 
-/*
- * This initialization will be replaced by a DT-based
- * initialization once the mvebu-mbus driver gains DT support.
- */
-
-#define ARMADA_370_XP_MBUS_WINS_OFFS   0x20000
-#define ARMADA_370_XP_MBUS_WINS_SIZE   0x100
-#define ARMADA_370_XP_SDRAM_WINS_OFFS  0x20180
-#define ARMADA_370_XP_SDRAM_WINS_SIZE  0x20
-
-static void __init armada_370_xp_mbus_init(void)
-{
-	char *mbus_soc_name;
-	struct device_node *dn;
-	const __be32 mbus_wins_offs = cpu_to_be32(ARMADA_370_XP_MBUS_WINS_OFFS);
-	const __be32 sdram_wins_offs = cpu_to_be32(ARMADA_370_XP_SDRAM_WINS_OFFS);
-
-	if (of_machine_is_compatible("marvell,armada370"))
-		mbus_soc_name = "marvell,armada370-mbus";
-	else
-		mbus_soc_name = "marvell,armadaxp-mbus";
-
-	dn = of_find_node_by_name(NULL, "internal-regs");
-	BUG_ON(!dn);
-
-	mvebu_mbus_init(mbus_soc_name,
-			of_translate_address(dn, &mbus_wins_offs),
-			ARMADA_370_XP_MBUS_WINS_SIZE,
-			of_translate_address(dn, &sdram_wins_offs),
-			ARMADA_370_XP_SDRAM_WINS_SIZE);
-}
-
 static void __init armada_370_xp_timer_and_clk_init(void)
 {
 	of_clk_init(NULL);
-	armada_370_xp_timer_init();
+	clocksource_of_init();
 	coherency_init();
-	armada_370_xp_mbus_init();
+	BUG_ON(mvebu_mbus_dt_init());
 #ifdef CONFIG_CACHE_L2X0
 	l2x0_of_init(0, ~0UL);
 #endif
diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c
index 4c24303..58adf2f 100644
--- a/arch/arm/mach-mvebu/coherency.c
+++ b/arch/arm/mach-mvebu/coherency.c
@@ -140,6 +140,7 @@ int __init coherency_init(void)
 		coherency_base = of_iomap(np, 0);
 		coherency_cpu_base = of_iomap(np, 1);
 		set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0);
+		of_node_put(np);
 	}
 
 	return 0;
@@ -147,9 +148,14 @@ int __init coherency_init(void)
 
 static int __init coherency_late_init(void)
 {
-	if (of_find_matching_node(NULL, of_coherency_table))
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, of_coherency_table);
+	if (np) {
 		bus_register_notifier(&platform_bus_type,
 				      &mvebu_hwcc_platform_nb);
+		of_node_put(np);
+	}
 	return 0;
 }
 
diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
index ce81d30..ff69c2d 100644
--- a/arch/arm/mach-mvebu/platsmp.c
+++ b/arch/arm/mach-mvebu/platsmp.c
@@ -21,6 +21,7 @@
 #include <linux/smp.h>
 #include <linux/clk.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/mbus.h>
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
@@ -29,45 +30,43 @@
 #include "pmsu.h"
 #include "coherency.h"
 
+#define AXP_BOOTROM_BASE 0xfff00000
+#define AXP_BOOTROM_SIZE 0x100000
+
+static struct clk *__init get_cpu_clk(int cpu)
+{
+	struct clk *cpu_clk;
+	struct device_node *np = of_get_cpu_node(cpu, NULL);
+
+	if (WARN(!np, "missing cpu node\n"))
+		return NULL;
+	cpu_clk = of_clk_get(np, 0);
+	if (WARN_ON(IS_ERR(cpu_clk)))
+		return NULL;
+	return cpu_clk;
+}
+
 void __init set_secondary_cpus_clock(void)
 {
-	int thiscpu;
+	int thiscpu, cpu;
 	unsigned long rate;
-	struct clk *cpu_clk = NULL;
-	struct device_node *np = NULL;
+	struct clk *cpu_clk;
 
 	thiscpu = smp_processor_id();
-	for_each_node_by_type(np, "cpu") {
-		int err;
-		int cpu;
-
-		err = of_property_read_u32(np, "reg", &cpu);
-		if (WARN_ON(err))
-			return;
-
-		if (cpu == thiscpu) {
-			cpu_clk = of_clk_get(np, 0);
-			break;
-		}
-	}
-	if (WARN_ON(IS_ERR(cpu_clk)))
+	cpu_clk = get_cpu_clk(thiscpu);
+	if (!cpu_clk)
 		return;
 	clk_prepare_enable(cpu_clk);
 	rate = clk_get_rate(cpu_clk);
 
 	/* set all the other CPU clk to the same rate than the boot CPU */
-	for_each_node_by_type(np, "cpu") {
-		int err;
-		int cpu;
-
-		err = of_property_read_u32(np, "reg", &cpu);
-		if (WARN_ON(err))
+	for_each_possible_cpu(cpu) {
+		if (cpu == thiscpu)
+			continue;
+		cpu_clk = get_cpu_clk(cpu);
+		if (!cpu_clk)
 			return;
-
-		if (cpu != thiscpu) {
-			cpu_clk = of_clk_get(np, 0);
-			clk_set_rate(cpu_clk, rate);
-		}
+		clk_set_rate(cpu_clk, rate);
 	}
 }
 
@@ -87,37 +86,39 @@ static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static void __init armada_xp_smp_init_cpus(void)
 {
-	struct device_node *np;
-	unsigned int i, ncores;
+	unsigned int ncores = num_possible_cpus();
 
-	np = of_find_node_by_name(NULL, "cpus");
-	if (!np)
-		panic("No 'cpus' node found\n");
-
-	ncores = of_get_child_count(np);
 	if (ncores == 0 || ncores > ARMADA_XP_MAX_CPUS)
 		panic("Invalid number of CPUs in DT\n");
 
-	/* Limit possible CPUs to defconfig */
-	if (ncores > nr_cpu_ids) {
-		pr_warn("SMP: %d CPUs physically present. Only %d configured.",
-			ncores, nr_cpu_ids);
-		pr_warn("Clipping CPU count to %d\n", nr_cpu_ids);
-		ncores = nr_cpu_ids;
-	}
-
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-
 	set_smp_cross_call(armada_mpic_send_doorbell);
 }
 
 void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
 {
+	struct device_node *node;
+	struct resource res;
+	int err;
+
 	set_secondary_cpus_clock();
 	flush_cache_all();
 	set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0);
-	mvebu_mbus_add_window("bootrom", 0xfff00000, SZ_1M);
+
+	/*
+	 * In order to boot the secondary CPUs we need to ensure
+	 * the bootROM is mapped at the correct address.
+	 */
+	node = of_find_compatible_node(NULL, NULL, "marvell,bootrom");
+	if (!node)
+		panic("Cannot find 'marvell,bootrom' compatible node");
+
+	err = of_address_to_resource(node, 0, &res);
+	if (err < 0)
+		panic("Cannot get 'bootrom' node address");
+
+	if (res.start != AXP_BOOTROM_BASE ||
+	    resource_size(&res) != AXP_BOOTROM_SIZE)
+		panic("The address for the BootROM is incorrect");
 }
 
 struct smp_operations armada_xp_smp_ops __initdata = {
diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c
index 3cc4bef..27fc4f0 100644
--- a/arch/arm/mach-mvebu/pmsu.c
+++ b/arch/arm/mach-mvebu/pmsu.c
@@ -67,6 +67,7 @@ int __init armada_370_xp_pmsu_init(void)
 		pr_info("Initializing Power Management Service Unit\n");
 		pmsu_mp_base = of_iomap(np, 0);
 		pmsu_reset_base = of_iomap(np, 1);
+		of_node_put(np);
 	}
 
 	return 0;
diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c
index f875124..5175083c 100644
--- a/arch/arm/mach-mvebu/system-controller.c
+++ b/arch/arm/mach-mvebu/system-controller.c
@@ -98,6 +98,7 @@ static int __init mvebu_system_controller_init(void)
 		BUG_ON(!match);
 		system_controller_base = of_iomap(np, 0);
 		mvebu_sc = (struct mvebu_system_controller *)match->data;
+		of_node_put(np);
 	}
 
 	return 0;
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 4ce27b53..1dc5acd 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -13,7 +13,6 @@
 #include <linux/clk.h>
 #include <linux/clk/mxs.h>
 #include <linux/clkdev.h>
-#include <linux/clocksource.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
@@ -61,6 +60,8 @@
 static u32 chipid;
 static u32 socid;
 
+static void __iomem *reset_addr;
+
 static inline void __mxs_setl(u32 mask, void __iomem *reg)
 {
 	__raw_writel(mask, reg + MXS_SET_ADDR);
@@ -329,6 +330,11 @@ static void __init crystalfontz_init(void)
 	update_fec_mac_prop(OUI_CRYSTALFONTZ);
 }
 
+static void __init m28cu3_init(void)
+{
+	update_fec_mac_prop(OUI_DENX);
+}
+
 static const char __init *mxs_get_soc_id(void)
 {
 	struct device_node *np;
@@ -393,12 +399,33 @@ static const char __init *mxs_get_revision(void)
 	u32 rev = mxs_get_cpu_rev();
 
 	if (rev != MXS_CHIP_REV_UNKNOWN)
-		return kasprintf(GFP_KERNEL, "TO%d.%d", (rev >> 4) & 0xf,
+		return kasprintf(GFP_KERNEL, "%d.%d", (rev >> 4) & 0xf,
 				rev & 0xf);
 	else
 		return kasprintf(GFP_KERNEL, "%s", "Unknown");
 }
 
+#define MX23_CLKCTRL_RESET_OFFSET	0x120
+#define MX28_CLKCTRL_RESET_OFFSET	0x1e0
+
+static int __init mxs_restart_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl");
+	reset_addr = of_iomap(np, 0);
+	if (!reset_addr)
+		return -ENODEV;
+
+	if (of_device_is_compatible(np, "fsl,imx23-clkctrl"))
+		reset_addr += MX23_CLKCTRL_RESET_OFFSET;
+	else
+		reset_addr += MX28_CLKCTRL_RESET_OFFSET;
+	of_node_put(np);
+
+	return 0;
+}
+
 static void __init mxs_machine_init(void)
 {
 	struct device_node *root;
@@ -433,21 +460,20 @@ static void __init mxs_machine_init(void)
 		imx28_evk_init();
 	else if (of_machine_is_compatible("bluegiga,apx4devkit"))
 		apx4devkit_init();
-	else if (of_machine_is_compatible("crystalfontz,cfa10037") ||
-		 of_machine_is_compatible("crystalfontz,cfa10049") ||
-		 of_machine_is_compatible("crystalfontz,cfa10055") ||
-		 of_machine_is_compatible("crystalfontz,cfa10057"))
+	else if (of_machine_is_compatible("crystalfontz,cfa10036"))
 		crystalfontz_init();
+	else if (of_machine_is_compatible("msr,m28cu3"))
+		m28cu3_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     NULL, parent);
 
+	mxs_restart_init();
+
 	if (of_machine_is_compatible("karo,tx28"))
 		tx28_post_init();
 }
 
-#define MX23_CLKCTRL_RESET_OFFSET	0x120
-#define MX28_CLKCTRL_RESET_OFFSET	0x1e0
 #define MXS_CLKCTRL_RESET_CHIP		(1 << 1)
 
 /*
@@ -455,41 +481,20 @@ static void __init mxs_machine_init(void)
  */
 static void mxs_restart(enum reboot_mode mode, const char *cmd)
 {
-	struct device_node *np;
-	void __iomem *reset_addr;
+	if (reset_addr) {
+		/* reset the chip */
+		__mxs_setl(MXS_CLKCTRL_RESET_CHIP, reset_addr);
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl");
-	reset_addr = of_iomap(np, 0);
-	if (!reset_addr)
-		goto soft;
+		pr_err("Failed to assert the chip reset\n");
 
-	if (of_device_is_compatible(np, "fsl,imx23-clkctrl"))
-		reset_addr += MX23_CLKCTRL_RESET_OFFSET;
-	else
-		reset_addr += MX28_CLKCTRL_RESET_OFFSET;
-
-	/* reset the chip */
-	__mxs_setl(MXS_CLKCTRL_RESET_CHIP, reset_addr);
-
-	pr_err("Failed to assert the chip reset\n");
-
-	/* Delay to allow the serial port to show the message */
-	mdelay(50);
+		/* Delay to allow the serial port to show the message */
+		mdelay(50);
+	}
 
-soft:
 	/* We'll take a jump through zero as a poor second */
 	soft_restart(0);
 }
 
-static void __init mxs_timer_init(void)
-{
-	if (of_machine_is_compatible("fsl,imx23"))
-		mx23_clocks_init();
-	else
-		mx28_clocks_init();
-	clocksource_of_init();
-}
-
 static const char *mxs_dt_compat[] __initdata = {
 	"fsl,imx28",
 	"fsl,imx23",
@@ -498,7 +503,6 @@ static const char *mxs_dt_compat[] __initdata = {
 
 DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)")
 	.handle_irq	= icoll_handle_irq,
-	.init_time	= mxs_timer_init,
 	.init_machine	= mxs_machine_init,
 	.init_late      = mxs_pm_init,
 	.dt_compat	= mxs_dt_compat,
diff --git a/arch/arm/mach-mxs/pm.c b/arch/arm/mach-mxs/pm.c
index b2494d2..0170e99 100644
--- a/arch/arm/mach-mxs/pm.c
+++ b/arch/arm/mach-mxs/pm.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/suspend.h>
 #include <linux/io.h>
+#include "pm.h"
 
 static int mxs_suspend_enter(suspend_state_t state)
 {
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 5981c3d..4d42da4 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -27,6 +27,7 @@ config MACH_NOMADIK_8815NHK
 	select NOMADIK_8815
 	select I2C
 	select I2C_ALGOBIT
+	select I2C_NOMADIK
 
 endmenu
 endif
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 13e0df9..cce2c9d 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -25,15 +25,11 @@
 #include <linux/slab.h>
 #include <linux/irq.h>
 #include <linux/dma-mapping.h>
-#include <linux/platform_data/clk-nomadik.h>
-#include <linux/clocksource.h>
 #include <linux/of_irq.h>
 #include <linux/of_gpio.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
-#include <linux/mtd/fsmc.h>
 #include <linux/gpio.h>
-#include <linux/amba/mmci.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -113,50 +109,6 @@ static void cpu8815_restart(enum reboot_mode mode, const char *cmd)
 	writel(1, srcbase + 0x18);
 }
 
-/* Initial value for SRC control register: all timers use MXTAL/8 source */
-#define SRC_CR_INIT_MASK	0x00007fff
-#define SRC_CR_INIT_VAL		0x2aaa8000
-
-static void __init cpu8815_timer_init_of(void)
-{
-	struct device_node *mtu;
-	void __iomem *base;
-	int irq;
-	u32 src_cr;
-
-	/* We need this to be up now */
-	nomadik_clk_init();
-
-	mtu = of_find_node_by_path("/mtu@101e2000");
-	if (!mtu)
-		return;
-	base = of_iomap(mtu, 0);
-	if (WARN_ON(!base))
-		return;
-	irq = irq_of_parse_and_map(mtu, 0);
-
-	pr_info("Remapped MTU @ %p, irq: %d\n", base, irq);
-
-	/* Configure timer sources in "system reset controller" ctrl reg */
-	src_cr = readl(base);
-	src_cr &= SRC_CR_INIT_MASK;
-	src_cr |= SRC_CR_INIT_VAL;
-	writel(src_cr, base);
-
-	clocksource_of_init();
-}
-
-static struct fsmc_nand_timings cpu8815_nand_timings = {
-	.thiz	= 0,
-	.thold	= 0x10,
-	.twait	= 0x0A,
-	.tset	= 0,
-};
-
-static struct fsmc_nand_platform_data cpu8815_nand_data = {
-	.nand_timings = &cpu8815_nand_timings,
-};
-
 /*
  * The SMSC911x IRQ is connected to a GPIO pin, but the driver expects
  * to simply request an IRQ passed as a resource. So the GPIO pin needs
@@ -190,15 +142,6 @@ static int __init cpu8815_eth_init(void)
 device_initcall(cpu8815_eth_init);
 
 /*
- * TODO:
- * cannot be set from device tree, convert to a proper DT
- * binding.
- */
-static struct mmci_platform_data mmcsd_plat_data = {
-	.ocr_mask = MMC_VDD_29_30,
-};
-
-/*
  * This GPIO pin turns on a line that is used to detect card insertion
  * on this board.
  */
@@ -232,24 +175,13 @@ static int __init cpu8815_mmcsd_init(void)
 }
 device_initcall(cpu8815_mmcsd_init);
 
-
-/* These are mostly to get the right device names for the clock lookups */
-static struct of_dev_auxdata cpu8815_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("stericsson,fsmc-nand", NOMADIK_FSMC_BASE,
-		NULL, &cpu8815_nand_data),
-	OF_DEV_AUXDATA("arm,primecell", NOMADIK_SDI_BASE,
-		NULL, &mmcsd_plat_data),
-	{ /* sentinel */ },
-};
-
 static void __init cpu8815_init_of(void)
 {
 #ifdef CONFIG_CACHE_L2X0
 	/* At full speed latency must be >=2, so 0x249 in low bits */
 	l2x0_of_init(0x00730249, 0xfe000fff);
 #endif
-	of_platform_populate(NULL, of_default_bus_match_table,
-			cpu8815_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char * cpu8815_board_compat[] = {
@@ -259,7 +191,6 @@ static const char * cpu8815_board_compat[] = {
 
 DT_MACHINE_START(NOMADIK_DT, "Nomadik STn8815")
 	.map_io		= cpu8815_map_io,
-	.init_time	= cpu8815_timer_init_of,
 	.init_machine	= cpu8815_init_of,
 	.restart	= cpu8815_restart,
 	.dt_compat      = cpu8815_board_compat,
diff --git a/arch/arm/mach-nspire/nspire.c b/arch/arm/mach-nspire/nspire.c
index 99e2609..4b2ed2e 100644
--- a/arch/arm/mach-nspire/nspire.c
+++ b/arch/arm/mach-nspire/nspire.c
@@ -14,11 +14,9 @@
 #include <linux/of_platform.h>
 #include <linux/irqchip.h>
 #include <linux/irqchip/arm-vic.h>
-#include <linux/clk-provider.h>
 #include <linux/clkdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
-#include <linux/clocksource.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -65,12 +63,6 @@ static void __init nspire_init(void)
 			nspire_auxdata, NULL);
 }
 
-static void __init nspire_init_time(void)
-{
-	of_clk_init(NULL);
-	clocksource_of_init();
-}
-
 static void nspire_restart(char mode, const char *cmd)
 {
 	void __iomem *base = ioremap(NSPIRE_MISC_PHYS_BASE, SZ_4K);
@@ -83,7 +75,6 @@ static void nspire_restart(char mode, const char *cmd)
 DT_MACHINE_START(NSPIRE, "TI-NSPIRE")
 	.dt_compat	= nspire_dt_match,
 	.map_io		= nspire_map_io,
-	.init_time	= nspire_init_time,
 	.init_machine	= nspire_init,
 	.restart	= nspire_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index abec019..732f8ee 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -46,6 +46,9 @@ static inline void omap7xx_map_io(void)
 void omap1510_fpga_init_irq(void);
 void omap15xx_map_io(void);
 #else
+static inline void omap1510_fpga_init_irq(void)
+{
+}
 static inline void omap15xx_map_io(void)
 {
 }
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 8bd71b2..3c0e422 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -135,8 +135,7 @@ static struct irq_chip omap_fpga_irq = {
  * mask_ack routine for all of the FPGA interrupts has been changed from
  * fpga_mask_ack_irq() to fpga_ack_irq() so that the specific FPGA interrupt
  * being serviced is left unmasked.  We can do this because the FPGA cascade
- * interrupt is installed with the IRQF_DISABLED flag, which leaves all
- * interrupts masked at the CPU while an FPGA interrupt handler executes.
+ * interrupt is run with all interrupts masked.
  *
  * Limited testing indicates that this workaround appears to be effective
  * for the smc9194 Ethernet driver used on the Innovator.  It should work
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index 02b3eb2..312a092 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -25,7 +25,7 @@
 #define OMAP1510_GPIO_BASE		0xFFFCE000
 
 /* gpio1 */
-static struct __initdata resource omap15xx_mpu_gpio_resources[] = {
+static struct resource omap15xx_mpu_gpio_resources[] = {
 	{
 		.start	= OMAP1_MPUIO_VBASE,
 		.end	= OMAP1_MPUIO_VBASE + SZ_2K - 1,
@@ -48,7 +48,7 @@ static struct omap_gpio_reg_offs omap15xx_mpuio_regs = {
 	.irqctrl	= OMAP_MPUIO_GPIO_INT_EDGE,
 };
 
-static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
+static struct omap_gpio_platform_data omap15xx_mpu_gpio_config = {
 	.is_mpuio		= true,
 	.bank_width		= 16,
 	.bank_stride		= 1,
@@ -66,7 +66,7 @@ static struct platform_device omap15xx_mpu_gpio = {
 };
 
 /* gpio2 */
-static struct __initdata resource omap15xx_gpio_resources[] = {
+static struct resource omap15xx_gpio_resources[] = {
 	{
 		.start	= OMAP1510_GPIO_BASE,
 		.end	= OMAP1510_GPIO_BASE + SZ_2K - 1,
@@ -90,7 +90,7 @@ static struct omap_gpio_reg_offs omap15xx_gpio_regs = {
 	.pinctrl	= OMAP1510_GPIO_PIN_CONTROL,
 };
 
-static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
+static struct omap_gpio_platform_data omap15xx_gpio_config = {
 	.bank_width		= 16,
 	.regs                   = &omap15xx_gpio_regs,
 };
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index b9952a2..6e6ec93 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -31,7 +31,7 @@
 #define SYSCONFIG_WORD			0x14
 
 /* mpu gpio */
-static struct __initdata resource omap16xx_mpu_gpio_resources[] = {
+static struct resource omap16xx_mpu_gpio_resources[] = {
 	{
 		.start	= OMAP1_MPUIO_VBASE,
 		.end	= OMAP1_MPUIO_VBASE + SZ_2K - 1,
@@ -54,7 +54,7 @@ static struct omap_gpio_reg_offs omap16xx_mpuio_regs = {
 	.irqctrl	= OMAP_MPUIO_GPIO_INT_EDGE,
 };
 
-static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
+static struct omap_gpio_platform_data omap16xx_mpu_gpio_config = {
 	.is_mpuio		= true,
 	.bank_width		= 16,
 	.bank_stride		= 1,
@@ -72,7 +72,7 @@ static struct platform_device omap16xx_mpu_gpio = {
 };
 
 /* gpio1 */
-static struct __initdata resource omap16xx_gpio1_resources[] = {
+static struct resource omap16xx_gpio1_resources[] = {
 	{
 		.start	= OMAP1610_GPIO1_BASE,
 		.end	= OMAP1610_GPIO1_BASE + SZ_2K - 1,
@@ -100,7 +100,7 @@ static struct omap_gpio_reg_offs omap16xx_gpio_regs = {
 	.edgectrl2	= OMAP1610_GPIO_EDGE_CTRL2,
 };
 
-static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
+static struct omap_gpio_platform_data omap16xx_gpio1_config = {
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -116,7 +116,7 @@ static struct platform_device omap16xx_gpio1 = {
 };
 
 /* gpio2 */
-static struct __initdata resource omap16xx_gpio2_resources[] = {
+static struct resource omap16xx_gpio2_resources[] = {
 	{
 		.start	= OMAP1610_GPIO2_BASE,
 		.end	= OMAP1610_GPIO2_BASE + SZ_2K - 1,
@@ -128,7 +128,7 @@ static struct __initdata resource omap16xx_gpio2_resources[] = {
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = {
+static struct omap_gpio_platform_data omap16xx_gpio2_config = {
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -144,7 +144,7 @@ static struct platform_device omap16xx_gpio2 = {
 };
 
 /* gpio3 */
-static struct __initdata resource omap16xx_gpio3_resources[] = {
+static struct resource omap16xx_gpio3_resources[] = {
 	{
 		.start	= OMAP1610_GPIO3_BASE,
 		.end	= OMAP1610_GPIO3_BASE + SZ_2K - 1,
@@ -156,7 +156,7 @@ static struct __initdata resource omap16xx_gpio3_resources[] = {
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = {
+static struct omap_gpio_platform_data omap16xx_gpio3_config = {
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -172,7 +172,7 @@ static struct platform_device omap16xx_gpio3 = {
 };
 
 /* gpio4 */
-static struct __initdata resource omap16xx_gpio4_resources[] = {
+static struct resource omap16xx_gpio4_resources[] = {
 	{
 		.start	= OMAP1610_GPIO4_BASE,
 		.end	= OMAP1610_GPIO4_BASE + SZ_2K - 1,
@@ -184,7 +184,7 @@ static struct __initdata resource omap16xx_gpio4_resources[] = {
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = {
+static struct omap_gpio_platform_data omap16xx_gpio4_config = {
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -199,7 +199,7 @@ static struct platform_device omap16xx_gpio4 = {
 	.resource = omap16xx_gpio4_resources,
 };
 
-static struct __initdata platform_device * omap16xx_gpio_dev[] = {
+static struct platform_device *omap16xx_gpio_dev[] __initdata = {
 	&omap16xx_mpu_gpio,
 	&omap16xx_gpio1,
 	&omap16xx_gpio2,
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index f5819b2..4612d25 100644
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -30,7 +30,7 @@
 #define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
 
 /* mpu gpio */
-static struct __initdata resource omap7xx_mpu_gpio_resources[] = {
+static struct resource omap7xx_mpu_gpio_resources[] = {
 	{
 		.start	= OMAP1_MPUIO_VBASE,
 		.end	= OMAP1_MPUIO_VBASE + SZ_2K - 1,
@@ -53,7 +53,7 @@ static struct omap_gpio_reg_offs omap7xx_mpuio_regs = {
 	.irqctrl	= OMAP_MPUIO_GPIO_INT_EDGE >> 1,
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
+static struct omap_gpio_platform_data omap7xx_mpu_gpio_config = {
 	.is_mpuio		= true,
 	.bank_width		= 16,
 	.bank_stride		= 2,
@@ -71,7 +71,7 @@ static struct platform_device omap7xx_mpu_gpio = {
 };
 
 /* gpio1 */
-static struct __initdata resource omap7xx_gpio1_resources[] = {
+static struct resource omap7xx_gpio1_resources[] = {
 	{
 		.start	= OMAP7XX_GPIO1_BASE,
 		.end	= OMAP7XX_GPIO1_BASE + SZ_2K - 1,
@@ -94,7 +94,7 @@ static struct omap_gpio_reg_offs omap7xx_gpio_regs = {
 	.irqctrl	= OMAP7XX_GPIO_INT_CONTROL,
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
+static struct omap_gpio_platform_data omap7xx_gpio1_config = {
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -110,7 +110,7 @@ static struct platform_device omap7xx_gpio1 = {
 };
 
 /* gpio2 */
-static struct __initdata resource omap7xx_gpio2_resources[] = {
+static struct resource omap7xx_gpio2_resources[] = {
 	{
 		.start	= OMAP7XX_GPIO2_BASE,
 		.end	= OMAP7XX_GPIO2_BASE + SZ_2K - 1,
@@ -122,7 +122,7 @@ static struct __initdata resource omap7xx_gpio2_resources[] = {
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = {
+static struct omap_gpio_platform_data omap7xx_gpio2_config = {
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -138,7 +138,7 @@ static struct platform_device omap7xx_gpio2 = {
 };
 
 /* gpio3 */
-static struct __initdata resource omap7xx_gpio3_resources[] = {
+static struct resource omap7xx_gpio3_resources[] = {
 	{
 		.start	= OMAP7XX_GPIO3_BASE,
 		.end	= OMAP7XX_GPIO3_BASE + SZ_2K - 1,
@@ -150,7 +150,7 @@ static struct __initdata resource omap7xx_gpio3_resources[] = {
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = {
+static struct omap_gpio_platform_data omap7xx_gpio3_config = {
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -166,7 +166,7 @@ static struct platform_device omap7xx_gpio3 = {
 };
 
 /* gpio4 */
-static struct __initdata resource omap7xx_gpio4_resources[] = {
+static struct resource omap7xx_gpio4_resources[] = {
 	{
 		.start	= OMAP7XX_GPIO4_BASE,
 		.end	= OMAP7XX_GPIO4_BASE + SZ_2K - 1,
@@ -178,7 +178,7 @@ static struct __initdata resource omap7xx_gpio4_resources[] = {
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = {
+static struct omap_gpio_platform_data omap7xx_gpio4_config = {
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -194,7 +194,7 @@ static struct platform_device omap7xx_gpio4 = {
 };
 
 /* gpio5 */
-static struct __initdata resource omap7xx_gpio5_resources[] = {
+static struct resource omap7xx_gpio5_resources[] = {
 	{
 		.start	= OMAP7XX_GPIO5_BASE,
 		.end	= OMAP7XX_GPIO5_BASE + SZ_2K - 1,
@@ -206,7 +206,7 @@ static struct __initdata resource omap7xx_gpio5_resources[] = {
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = {
+static struct omap_gpio_platform_data omap7xx_gpio5_config = {
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -222,7 +222,7 @@ static struct platform_device omap7xx_gpio5 = {
 };
 
 /* gpio6 */
-static struct __initdata resource omap7xx_gpio6_resources[] = {
+static struct resource omap7xx_gpio6_resources[] = {
 	{
 		.start	= OMAP7XX_GPIO6_BASE,
 		.end	= OMAP7XX_GPIO6_BASE + SZ_2K - 1,
@@ -234,7 +234,7 @@ static struct __initdata resource omap7xx_gpio6_resources[] = {
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = {
+static struct omap_gpio_platform_data omap7xx_gpio6_config = {
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -249,7 +249,7 @@ static struct platform_device omap7xx_gpio6 = {
 	.resource = omap7xx_gpio6_resources,
 };
 
-static struct __initdata platform_device * omap7xx_gpio_dev[] = {
+static struct platform_device *omap7xx_gpio_dev[] __initdata = {
 	&omap7xx_mpu_gpio,
 	&omap7xx_gpio1,
 	&omap7xx_gpio2,
diff --git a/arch/arm/mach-omap1/include/mach/soc.h b/arch/arm/mach-omap1/include/mach/soc.h
index 6cf9c1c..612bd1c 100644
--- a/arch/arm/mach-omap1/include/mach/soc.h
+++ b/arch/arm/mach-omap1/include/mach/soc.h
@@ -195,6 +195,7 @@ IS_OMAP_TYPE(1710, 0x1710)
 #define cpu_is_omap34xx()		0
 #define cpu_is_omap44xx()		0
 #define soc_is_omap54xx()		0
+#define soc_is_dra7xx()			0
 #define soc_is_am33xx()			0
 #define cpu_class_is_omap1()		1
 #define cpu_class_is_omap2()		0
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 358b82c..40a1ae3 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -628,7 +628,6 @@ static irqreturn_t omap_wakeup_interrupt(int irq, void *dev)
 
 static struct irqaction omap_wakeup_irq = {
 	.name		= "peripheral wakeup",
-	.flags		= IRQF_DISABLED,
 	.handler	= omap_wakeup_interrupt
 };
 
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 80603d2..6b5f298 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -160,7 +160,7 @@ static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
 
 static struct irqaction omap_mpu_timer1_irq = {
 	.name		= "mpu_timer1",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= omap_mpu_timer1_interrupt,
 };
 
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 0b74246..107e7ab 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -156,7 +156,7 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction omap_32k_timer_irq = {
 	.name		= "32KHz timer",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= omap_32k_timer_interrupt,
 };
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 3eed000..dc21df1 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -8,7 +8,6 @@ config ARCH_OMAP2
 	select CPU_V6
 	select MULTI_IRQ_HANDLER
 	select SOC_HAS_OMAP2_SDRC
-	select COMMON_CLK
 
 config ARCH_OMAP3
 	bool "TI OMAP3"
@@ -22,7 +21,6 @@ config ARCH_OMAP3
 	select PM_OPP if PM
 	select PM_RUNTIME if CPU_IDLE
 	select SOC_HAS_OMAP2_SDRC
-	select COMMON_CLK
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 
 config ARCH_OMAP4
@@ -37,16 +35,14 @@ config ARCH_OMAP4
 	select CACHE_L2X0
 	select CPU_V7
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
-	select LOCAL_TIMERS if SMP
 	select OMAP_INTERCONNECT
 	select PL310_ERRATA_588369
 	select PL310_ERRATA_727915
 	select PM_OPP if PM
 	select PM_RUNTIME if CPU_IDLE
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
-	select COMMON_CLK
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
 
@@ -60,18 +56,16 @@ config SOC_OMAP5
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if LOCAL_TIMERS
 	select HAVE_SMP
-	select COMMON_CLK
 	select HAVE_ARM_ARCH_TIMER
 	select ARM_ERRATA_798181 if SMP
 
 config SOC_AM33XX
-	bool "AM33XX support"
+	bool "TI AM33XX"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
 	select ARM_CPU_SUSPEND if PM
 	select CPU_V7
 	select MULTI_IRQ_HANDLER
-	select COMMON_CLK
 
 config SOC_AM43XX
 	bool "TI AM43x"
@@ -80,7 +74,6 @@ config SOC_AM43XX
 	select ARCH_OMAP2PLUS
 	select MULTI_IRQ_HANDLER
 	select ARM_GIC
-	select COMMON_CLK
 	select MACH_OMAP_GENERIC
 
 config ARCH_OMAP2PLUS
@@ -90,11 +83,11 @@ config ARCH_OMAP2PLUS
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_OMAP
 	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
-	select HAVE_CLK
+	select MACH_OMAP_GENERIC
 	select OMAP_DM_TIMER
 	select PINCTRL
 	select PROC_DEVICETREE if PROC_FS
@@ -118,7 +111,7 @@ config ARCH_OMAP2PLUS_TYPICAL
 	select I2C
 	select I2C_OMAP
 	select MENELAUS if ARCH_OMAP2
-	select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
+	select NEON if CPU_V7
 	select PM_RUNTIME
 	select REGULATOR
 	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
@@ -132,9 +125,17 @@ config SOC_HAS_OMAP2_SDRC
 
 config SOC_HAS_REALTIME_COUNTER
 	bool "Real time free running counter"
-	depends on SOC_OMAP5
+	depends on SOC_OMAP5 || SOC_DRA7XX
 	default y
 
+config SOC_DRA7XX
+	bool "TI DRA7XX"
+	select ARM_ARCH_TIMER
+	select CPU_V7
+	select ARM_GIC
+	select HAVE_SMP
+	select COMMON_CLK
+
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2
 
@@ -180,16 +181,11 @@ config OMAP_PACKAGE_CUS
 config OMAP_PACKAGE_CBP
        bool
 
-comment "OMAP Board Type"
+comment "OMAP Legacy Platform Data Board Type"
 	depends on ARCH_OMAP2PLUS
 
 config MACH_OMAP_GENERIC
-	bool "Generic OMAP2+ board"
-	depends on ARCH_OMAP2PLUS
-	default y
-	help
-	  Support for generic TI OMAP2+ boards using Flattened Device Tree.
-	  More information at Documentation/devicetree
+	bool
 
 config MACH_OMAP2_TUSB6010
 	bool
@@ -253,12 +249,6 @@ config MACH_OVERO
 	default y
 	select OMAP_PACKAGE_CBB
 
-config MACH_OMAP3EVM
-	bool "OMAP 3530 EVM board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
 config MACH_OMAP3517EVM
 	bool "OMAP3517/ AM3517 EVM board"
 	depends on ARCH_OMAP3
@@ -307,33 +297,12 @@ config MACH_NOKIA_N8X0
 	select MACH_NOKIA_N810_WIMAX
 	select OMAP_PACKAGE_ZAC
 
-config MACH_NOKIA_RM680
-	bool "Nokia N950 (RM-680) / N9 (RM-696) phones"
-	depends on ARCH_OMAP3
-	default y
-	select MACH_NOKIA_RM696
-	select OMAP_PACKAGE_CBB
-
 config MACH_NOKIA_RX51
 	bool "Nokia N900 (RX-51) phone"
 	depends on ARCH_OMAP3
 	default y
 	select OMAP_PACKAGE_CBB
 
-config MACH_OMAP_ZOOM2
-	bool "OMAP3 Zoom2 board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-
-config MACH_OMAP_ZOOM3
-	bool "OMAP3630 Zoom3 board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBP
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-
 config MACH_CM_T35
 	bool "CompuLab CM-T35/CM-T3730 modules"
 	depends on ARCH_OMAP3
@@ -350,31 +319,12 @@ config MACH_CM_T3517
 config MACH_CM_T3730
        bool
 
-config MACH_IGEP0020
-	bool "IGEP v2 board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
-config MACH_IGEP0030
-	bool "IGEP OMAP3 module"
-	depends on ARCH_OMAP3
-	default y
-	select MACH_IGEP0020
-	select OMAP_PACKAGE_CBB
-
 config MACH_SBC3530
 	bool "OMAP3 SBC STALKER board"
 	depends on ARCH_OMAP3
 	default y
 	select OMAP_PACKAGE_CUS
 
-config MACH_OMAP_3630SDP
-	bool "OMAP3630 SDP board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBP
-
 config MACH_TI8168EVM
 	bool "TI8168 Evaluation Module"
 	depends on SOC_TI81XX
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index d4f6715..e15ac00 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -8,7 +8,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o gpmc.o timer.o pm.o \
 	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
-	 omap_device.o sram.o
+	 omap_device.o sram.o drm.o
 
 omap-2-3-common				= irq.o
 hwmod-common				= omap_hwmod.o omap_hwmod_reset.o \
@@ -23,6 +23,7 @@ obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
 obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
 obj-$(CONFIG_SOC_OMAP5)	 += prm44xx.o $(hwmod-common) $(secure-common)
 obj-$(CONFIG_SOC_AM43XX) += $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_DRA7XX) += prm44xx.o $(hwmod-common) $(secure-common)
 
 ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
 obj-y += mcbsp.o
@@ -39,6 +40,7 @@ omap-4-5-common				=  omap4-common.o omap-wakeupgen.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-4-5-common) $(smp-y) sleep44xx.o
 obj-$(CONFIG_SOC_OMAP5)			+= $(omap-4-5-common) $(smp-y) sleep44xx.o
 obj-$(CONFIG_SOC_AM43XX)		+= $(omap-4-5-common)
+obj-$(CONFIG_SOC_DRA7XX)		+= $(omap-4-5-common) $(smp-y)
 
 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_omap-headsmp.o			:=-Wa,-march=armv7-a$(plus_sec)
@@ -61,6 +63,7 @@ obj-$(CONFIG_SOC_AM33XX)		+= am33xx-restart.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap3-restart.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap4-restart.o
 obj-$(CONFIG_SOC_OMAP5)			+= omap4-restart.o
+obj-$(CONFIG_SOC_DRA7XX)		+= omap4-restart.o
 
 # Pin multiplexing
 obj-$(CONFIG_SOC_OMAP2420)		+= mux2420.o
@@ -87,6 +90,7 @@ obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o omap-mpuss-lowpower.o
 obj-$(CONFIG_SOC_OMAP5)			+= omap-mpuss-lowpower.o
+obj-$(CONFIG_SOC_DRA7XX)		+= omap-mpuss-lowpower.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 
 obj-$(CONFIG_POWER_AVS_OMAP)		+= sr_device.o
@@ -108,12 +112,13 @@ obj-$(CONFIG_ARCH_OMAP2)		+= prm2xxx_3xxx.o prm2xxx.o cm2xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= prm2xxx_3xxx.o prm3xxx.o cm3xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= vc3xxx_data.o vp3xxx_data.o
 obj-$(CONFIG_SOC_AM33XX)		+= prm33xx.o cm33xx.o
-obj-$(CONFIG_SOC_AM43XX)		+= prm33xx.o cm33xx.o
 omap-prcm-4-5-common			=  cminst44xx.o cm44xx.o prm44xx.o \
 					   prcm_mpu44xx.o prminst44xx.o \
 					   vc44xx_data.o vp44xx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-prcm-4-5-common)
 obj-$(CONFIG_SOC_OMAP5)			+= $(omap-prcm-4-5-common)
+obj-$(CONFIG_SOC_DRA7XX)		+= $(omap-prcm-4-5-common)
+obj-$(CONFIG_SOC_AM43XX)		+= $(omap-prcm-4-5-common)
 
 # OMAP voltage domains
 voltagedomain-common			:= voltage.o vc.o vp.o
@@ -141,8 +146,11 @@ obj-$(CONFIG_ARCH_OMAP4)		+= powerdomains44xx_data.o
 obj-$(CONFIG_SOC_AM33XX)		+= $(powerdomain-common)
 obj-$(CONFIG_SOC_AM33XX)		+= powerdomains33xx_data.o
 obj-$(CONFIG_SOC_AM43XX)		+= $(powerdomain-common)
+obj-$(CONFIG_SOC_AM43XX)		+= powerdomains43xx_data.o
 obj-$(CONFIG_SOC_OMAP5)			+= $(powerdomain-common)
 obj-$(CONFIG_SOC_OMAP5)			+= powerdomains54xx_data.o
+obj-$(CONFIG_SOC_DRA7XX)		+= $(powerdomain-common)
+obj-$(CONFIG_SOC_DRA7XX)		+= powerdomains7xx_data.o
 
 # PRCM clockdomain control
 clockdomain-common			+= clockdomain.o
@@ -158,8 +166,11 @@ obj-$(CONFIG_ARCH_OMAP4)		+= clockdomains44xx_data.o
 obj-$(CONFIG_SOC_AM33XX)		+= $(clockdomain-common)
 obj-$(CONFIG_SOC_AM33XX)		+= clockdomains33xx_data.o
 obj-$(CONFIG_SOC_AM43XX)		+= $(clockdomain-common)
+obj-$(CONFIG_SOC_AM43XX)		+= clockdomains43xx_data.o
 obj-$(CONFIG_SOC_OMAP5)			+= $(clockdomain-common)
 obj-$(CONFIG_SOC_OMAP5)			+= clockdomains54xx_data.o
+obj-$(CONFIG_SOC_DRA7XX)		+= $(clockdomain-common)
+obj-$(CONFIG_SOC_DRA7XX)		+= clockdomains7xx_data.o
 
 # Clock framework
 obj-$(CONFIG_ARCH_OMAP2)		+= $(clock-common) clock2xxx.o
@@ -201,8 +212,14 @@ obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_2xxx_3xxx_ipblock_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_2xxx_3xxx_interconnect_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_3xxx_data.o
 obj-$(CONFIG_SOC_AM33XX)		+= omap_hwmod_33xx_data.o
+obj-$(CONFIG_SOC_AM33XX)		+= omap_hwmod_33xx_43xx_interconnect_data.o
+obj-$(CONFIG_SOC_AM33XX)		+= omap_hwmod_33xx_43xx_ipblock_data.o
+obj-$(CONFIG_SOC_AM43XX)		+= omap_hwmod_43xx_data.o
+obj-$(CONFIG_SOC_AM43XX)		+= omap_hwmod_33xx_43xx_interconnect_data.o
+obj-$(CONFIG_SOC_AM43XX)		+= omap_hwmod_33xx_43xx_ipblock_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap_hwmod_44xx_data.o
 obj-$(CONFIG_SOC_OMAP5)			+= omap_hwmod_54xx_data.o
+obj-$(CONFIG_SOC_DRA7XX)		+= omap_hwmod_7xx_data.o
 
 # EMU peripherals
 obj-$(CONFIG_OMAP3_EMU)			+= emu.o
@@ -218,12 +235,8 @@ endif
 # OMAP2420 MSDI controller integration support ("MMC")
 obj-$(CONFIG_SOC_OMAP2420)		+= msdi.o
 
-ifneq ($(CONFIG_DRM_OMAP),)
-obj-y					+= drm.o
-endif
-
 # Specific board support
-obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
+obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o pdata-quirks.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
 obj-$(CONFIG_MACH_OMAP_2430SDP)		+= board-2430sdp.o
 obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o
@@ -232,26 +245,14 @@ obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o
 obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o
 obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o
 obj-$(CONFIG_MACH_OVERO)		+= board-overo.o
-obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o
 obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o
 obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
-obj-$(CONFIG_MACH_NOKIA_RM680)		+= board-rm680.o sdram-nokia.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o sdram-nokia.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51-peripherals.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51-video.o
-obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom.o board-zoom-peripherals.o
-obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom-display.o
-obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom-debugboard.o
-obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom.o board-zoom-peripherals.o
-obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom-display.o
-obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom-debugboard.o
-obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-3630sdp.o
-obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-zoom-peripherals.o
-obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-zoom-display.o
 obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o
 obj-$(CONFIG_MACH_CM_T3517)		+= board-cm-t3517.o
-obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o
 obj-$(CONFIG_MACH_TOUCHBOOK)		+= board-omap3touchbook.o
 
 obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o
diff --git a/arch/arm/mach-omap2/am33xx-restart.c b/arch/arm/mach-omap2/am33xx-restart.c
index 1eae962..c88d8df7 100644
--- a/arch/arm/mach-omap2/am33xx-restart.c
+++ b/arch/arm/mach-omap2/am33xx-restart.c
@@ -24,8 +24,8 @@ void am33xx_restart(enum reboot_mode mode, const char *cmd)
 {
 	/* TODO: Handle mode and cmd if necessary */
 
-	am33xx_prm_rmw_reg_bits(AM33XX_GLOBAL_WARM_SW_RST_MASK,
-				AM33XX_GLOBAL_WARM_SW_RST_MASK,
+	am33xx_prm_rmw_reg_bits(AM33XX_RST_GLOBAL_WARM_SW_MASK,
+				AM33XX_RST_GLOBAL_WARM_SW_MASK,
 				AM33XX_PRM_DEVICE_MOD,
 				AM33XX_PRM_RSTCTRL_OFFSET);
 
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 244d8a5..c711ad6 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -100,39 +100,52 @@ static struct platform_device sdp2430_flash_device = {
 	.resource	= &sdp2430_flash_resource,
 };
 
-static struct platform_device *sdp2430_devices[] __initdata = {
-	&sdp2430_flash_device,
-};
-
 /* LCD */
 #define SDP2430_LCD_PANEL_BACKLIGHT_GPIO	91
 #define SDP2430_LCD_PANEL_ENABLE_GPIO		154
 
-static struct panel_generic_dpi_data sdp2430_panel_data = {
-	.name			= "nec_nl2432dr22-11b",
-	.num_gpios		= 2,
-	.gpios			= {
-		SDP2430_LCD_PANEL_ENABLE_GPIO,
-		SDP2430_LCD_PANEL_BACKLIGHT_GPIO,
-	},
+static const struct display_timing sdp2430_lcd_videomode = {
+	.pixelclock	= { 0, 5400000, 0 },
+
+	.hactive = { 0, 240, 0 },
+	.hfront_porch = { 0, 3, 0 },
+	.hback_porch = { 0, 39, 0 },
+	.hsync_len = { 0, 3, 0 },
+
+	.vactive = { 0, 320, 0 },
+	.vfront_porch = { 0, 2, 0 },
+	.vback_porch = { 0, 7, 0 },
+	.vsync_len = { 0, 1, 0 },
+
+	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
 };
 
-static struct omap_dss_device sdp2430_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "generic_dpi_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 16,
-	.data			= &sdp2430_panel_data,
+static struct panel_dpi_platform_data sdp2430_lcd_pdata = {
+	.name                   = "lcd",
+	.source                 = "dpi.0",
+
+	.data_lines		= 16,
+
+	.display_timing		= &sdp2430_lcd_videomode,
+
+	.enable_gpio		= SDP2430_LCD_PANEL_ENABLE_GPIO,
+	.backlight_gpio		= SDP2430_LCD_PANEL_BACKLIGHT_GPIO,
 };
 
-static struct omap_dss_device *sdp2430_dss_devices[] = {
-	&sdp2430_lcd_device,
+static struct platform_device sdp2430_lcd_device = {
+	.name                   = "panel-dpi",
+	.id                     = 0,
+	.dev.platform_data      = &sdp2430_lcd_pdata,
 };
 
 static struct omap_dss_board_info sdp2430_dss_data = {
-	.num_devices	= ARRAY_SIZE(sdp2430_dss_devices),
-	.devices	= sdp2430_dss_devices,
-	.default_device	= &sdp2430_lcd_device,
+	.default_display_name = "lcd",
+};
+
+static struct platform_device *sdp2430_devices[] __initdata = {
+	&sdp2430_flash_device,
+	&sdp2430_lcd_device,
 };
 
 #if IS_ENABLED(CONFIG_SMC91X)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 23b004a..d95d0ef 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -126,53 +126,65 @@ static void __init sdp3430_display_init(void)
 
 }
 
-static struct panel_sharp_ls037v7dw01_data sdp3430_lcd_data = {
-	.resb_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO,
-	.ini_gpio = -1,
-	.mo_gpio = -1,
-	.lr_gpio = -1,
-	.ud_gpio = -1,
+static struct panel_sharp_ls037v7dw01_platform_data sdp3430_lcd_pdata = {
+	.name                   = "lcd",
+	.source                 = "dpi.0",
+
+	.data_lines		= 16,
+
+	.resb_gpio		= SDP3430_LCD_PANEL_ENABLE_GPIO,
+	.ini_gpio		= -1,
+	.mo_gpio		= -1,
+	.lr_gpio		= -1,
+	.ud_gpio		= -1,
+};
+
+static struct platform_device sdp3430_lcd_device = {
+	.name                   = "panel-sharp-ls037v7dw01",
+	.id                     = 0,
+	.dev.platform_data      = &sdp3430_lcd_pdata,
 };
 
-static struct omap_dss_device sdp3430_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "sharp_ls_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 16,
-	.data			= &sdp3430_lcd_data,
+static struct connector_dvi_platform_data sdp3430_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = -1,
 };
 
-static struct tfp410_platform_data dvi_panel = {
-	.power_down_gpio	= -1,
-	.i2c_bus_num		= -1,
+static struct platform_device sdp3430_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &sdp3430_dvi_connector_pdata,
 };
 
-static struct omap_dss_device sdp3430_dvi_device = {
-	.name			= "dvi",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "tfp410",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
+static struct encoder_tfp410_platform_data sdp3430_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = -1,
 };
 
-static struct omap_dss_device sdp3430_tv_device = {
-	.name			= "tv",
-	.driver_name		= "venc",
-	.type			= OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+static struct platform_device sdp3430_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &sdp3430_tfp410_pdata,
 };
 
+static struct connector_atv_platform_data sdp3430_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.invert_polarity = false,
+};
 
-static struct omap_dss_device *sdp3430_dss_devices[] = {
-	&sdp3430_lcd_device,
-	&sdp3430_dvi_device,
-	&sdp3430_tv_device,
+static struct platform_device sdp3430_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &sdp3430_tv_pdata,
 };
 
 static struct omap_dss_board_info sdp3430_dss_data = {
-	.num_devices	= ARRAY_SIZE(sdp3430_dss_devices),
-	.devices	= sdp3430_dss_devices,
-	.default_device	= &sdp3430_lcd_device,
+	.default_display_name = "lcd",
 };
 
 static struct omap2_hsmmc_info mmc[] = {
@@ -583,6 +595,11 @@ static void __init omap_3430sdp_init(void)
 	omap_hsmmc_init(mmc);
 	omap3430_i2c_init();
 	omap_display_init(&sdp3430_dss_data);
+	platform_device_register(&sdp3430_lcd_device);
+	platform_device_register(&sdp3430_tfp410_device);
+	platform_device_register(&sdp3430_dvi_connector_device);
+	platform_device_register(&sdp3430_tv_connector_device);
+
 	if (omap_rev() > OMAP3430_REV_ES1_0)
 		gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV2;
 	else
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
deleted file mode 100644
index 20d6d81..0000000
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/mtd/nand.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "gpmc-smc91x.h"
-
-#include "board-zoom.h"
-
-#include "board-flash.h"
-#include "mux.h"
-#include "sdram-hynix-h8mbx00u0mer-0em.h"
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-
-static struct omap_smc91x_platform_data board_smc91x_data = {
-	.cs             = 3,
-	.flags          = GPMC_MUX_ADD_DATA | IORESOURCE_IRQ_LOWLEVEL,
-};
-
-static void __init board_smc91x_init(void)
-{
-	board_smc91x_data.gpio_irq = 158;
-	gpmc_smc91x_init(&board_smc91x_data);
-}
-
-#else
-
-static inline void board_smc91x_init(void)
-{
-}
-
-#endif /* defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) */
-
-static void enable_board_wakeup_source(void)
-{
-	/* T2 interrupt line (keypad) */
-	omap_mux_init_signal("sys_nirq",
-		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
-}
-
-static struct usbhs_phy_data phy_data[] __initdata = {
-	{
-		.port = 1,
-		.reset_gpio = 126,
-		.vcc_gpio = -EINVAL,
-	},
-	{
-		.port = 2,
-		.reset_gpio = 61,
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-/*
- * SDP3630 CS organization
- * See also the Switch S8 settings in the comments.
- */
-static char chip_sel_sdp[][GPMC_CS_NUM] = {
-	{PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
-	{PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
-	{PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
-};
-
-static struct mtd_partition sdp_nor_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-		.name		= "Bootloader-NOR",
-		.offset		= 0,
-		.size		= SZ_256K,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-		.name		= "Params-NOR",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_256K,
-		.mask_flags	= 0,
-	},
-	/* kernel */
-	{
-		.name		= "Kernel-NOR",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M,
-		.mask_flags	= 0
-	},
-	/* file system */
-	{
-		.name		= "Filesystem-NOR",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0
-	}
-};
-
-static struct mtd_partition sdp_onenand_partitions[] = {
-	{
-		.name		= "X-Loader-OneNAND",
-		.offset		= 0,
-		.size		= 4 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE  /* force read-only */
-	},
-	{
-		.name		= "U-Boot-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 2 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE  /* force read-only */
-	},
-	{
-		.name		= "U-Boot Environment-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 1 * (64 * 2048),
-	},
-	{
-		.name		= "Kernel-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 16 * (64 * 2048),
-	},
-	{
-		.name		= "File System-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct mtd_partition sdp_nand_partitions[] = {
-	/* All the partition sizes are listed in terms of NAND block size */
-	{
-		.name		= "X-Loader-NAND",
-		.offset		= 0,
-		.size		= 4 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "U-Boot-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size		= 10 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "Boot Env-NAND",
-
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1c0000 */
-		.size		= 6 * (64 * 2048),
-	},
-	{
-		.name		= "Kernel-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
-		.size		= 40 * (64 * 2048),
-	},
-	{
-		.name		= "File System - NAND",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x780000 */
-	},
-};
-
-static struct flash_partitions sdp_flash_partitions[] = {
-	{
-		.parts = sdp_nor_partitions,
-		.nr_parts = ARRAY_SIZE(sdp_nor_partitions),
-	},
-	{
-		.parts = sdp_onenand_partitions,
-		.nr_parts = ARRAY_SIZE(sdp_onenand_partitions),
-	},
-	{
-		.parts = sdp_nand_partitions,
-		.nr_parts = ARRAY_SIZE(sdp_nand_partitions),
-	},
-};
-
-static void __init omap_sdp_init(void)
-{
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
-	zoom_peripherals_init();
-	omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
-				  h8mbx00u0mer0em_sdrc_params);
-	zoom_display_init();
-	board_smc91x_init();
-	board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16);
-	enable_board_wakeup_source();
-
-	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
-	usbhs_init(&usbhs_bdata);
-}
-
-MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3630_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap_sdp_init,
-	.init_late	= omap3630_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index fc53911..0d499a1 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -110,8 +110,6 @@ static void __init am3517_crane_i2c_init(void)
 
 static void __init am3517_crane_init(void)
 {
-	int ret;
-
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index d63f14b..543d9a8 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -21,7 +21,7 @@
 #include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/can/platform/ti_hecc.h>
 #include <linux/davinci_emac.h>
 #include <linux/mmc/host.h>
@@ -120,56 +120,95 @@ static int __init am3517_evm_i2c_init(void)
 	return 0;
 }
 
-static struct panel_generic_dpi_data lcd_panel = {
-	.name			= "sharp_lq",
-	.num_gpios		= 3,
-	.gpios			= {
-		LCD_PANEL_PWR,
-		LCD_PANEL_BKLIGHT_PWR,
-		LCD_PANEL_PWM,
-	},
+static const struct display_timing am3517_evm_lcd_videomode = {
+	.pixelclock	= { 0, 9000000, 0 },
+
+	.hactive = { 0, 480, 0 },
+	.hfront_porch = { 0, 3, 0 },
+	.hback_porch = { 0, 2, 0 },
+	.hsync_len = { 0, 42, 0 },
+
+	.vactive = { 0, 272, 0 },
+	.vfront_porch = { 0, 3, 0 },
+	.vback_porch = { 0, 2, 0 },
+	.vsync_len = { 0, 11, 0 },
+
+	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+		DISPLAY_FLAGS_DE_LOW | DISPLAY_FLAGS_PIXDATA_POSEDGE,
+};
+
+static struct panel_dpi_platform_data am3517_evm_lcd_pdata = {
+	.name                   = "lcd",
+	.source                 = "dpi.0",
+
+	.data_lines		= 16,
+
+	.display_timing		= &am3517_evm_lcd_videomode,
+
+	.enable_gpio		= LCD_PANEL_PWR,
+	.backlight_gpio		= LCD_PANEL_BKLIGHT_PWR,
+};
+
+static struct platform_device am3517_evm_lcd_device = {
+	.name                   = "panel-dpi",
+	.id                     = 0,
+	.dev.platform_data      = &am3517_evm_lcd_pdata,
 };
 
-static struct omap_dss_device am3517_evm_lcd_device = {
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.name			= "lcd",
-	.driver_name		= "generic_dpi_panel",
-	.data			= &lcd_panel,
-	.phy.dpi.data_lines 	= 16,
+static struct connector_dvi_platform_data am3517_evm_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = -1,
 };
 
-static struct omap_dss_device am3517_evm_tv_device = {
-	.type 			= OMAP_DISPLAY_TYPE_VENC,
-	.name 			= "tv",
-	.driver_name		= "venc",
-	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+static struct platform_device am3517_evm_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &am3517_evm_dvi_connector_pdata,
 };
 
-static struct tfp410_platform_data dvi_panel = {
-	.power_down_gpio	= -1,
-	.i2c_bus_num		= -1,
+static struct encoder_tfp410_platform_data am3517_evm_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = -1,
 };
 
-static struct omap_dss_device am3517_evm_dvi_device = {
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.name			= "dvi",
-	.driver_name		= "tfp410",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
+static struct platform_device am3517_evm_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &am3517_evm_tfp410_pdata,
 };
 
-static struct omap_dss_device *am3517_evm_dss_devices[] = {
-	&am3517_evm_lcd_device,
-	&am3517_evm_tv_device,
-	&am3517_evm_dvi_device,
+static struct connector_atv_platform_data am3517_evm_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.invert_polarity = false,
+};
+
+static struct platform_device am3517_evm_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &am3517_evm_tv_pdata,
 };
 
 static struct omap_dss_board_info am3517_evm_dss_data = {
-	.num_devices	= ARRAY_SIZE(am3517_evm_dss_devices),
-	.devices	= am3517_evm_dss_devices,
-	.default_device	= &am3517_evm_lcd_device,
+	.default_display_name = "lcd",
 };
 
+static void __init am3517_evm_display_init(void)
+{
+	gpio_request_one(LCD_PANEL_PWM, GPIOF_OUT_INIT_HIGH, "lcd panel pwm");
+
+	omap_display_init(&am3517_evm_dss_data);
+
+	platform_device_register(&am3517_evm_tfp410_device);
+	platform_device_register(&am3517_evm_dvi_connector_device);
+	platform_device_register(&am3517_evm_lcd_device);
+	platform_device_register(&am3517_evm_tv_connector_device);
+}
+
 /*
  * Board initialization
  */
@@ -295,7 +334,9 @@ static void __init am3517_evm_init(void)
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 
 	am3517_evm_i2c_init();
-	omap_display_init(&am3517_evm_dss_data);
+
+	am3517_evm_display_init();
+
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
 
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index d4622ed..33d159e 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -190,52 +190,81 @@ static inline void cm_t35_init_nand(void) {}
 #define CM_T35_LCD_BL_GPIO 58
 #define CM_T35_DVI_EN_GPIO 54
 
-static struct panel_generic_dpi_data lcd_panel = {
-	.name			= "toppoly_tdo35s",
-	.num_gpios		= 1,
-	.gpios			= {
-		CM_T35_LCD_BL_GPIO,
-	},
+static const struct display_timing cm_t35_lcd_videomode = {
+	.pixelclock	= { 0, 26000000, 0 },
+
+	.hactive = { 0, 480, 0 },
+	.hfront_porch = { 0, 104, 0 },
+	.hback_porch = { 0, 8, 0 },
+	.hsync_len = { 0, 8, 0 },
+
+	.vactive = { 0, 640, 0 },
+	.vfront_porch = { 0, 4, 0 },
+	.vback_porch = { 0, 2, 0 },
+	.vsync_len = { 0, 2, 0 },
+
+	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_NEGEDGE,
+};
+
+static struct panel_dpi_platform_data cm_t35_lcd_pdata = {
+	.name                   = "lcd",
+	.source                 = "dpi.0",
+
+	.data_lines		= 18,
+
+	.display_timing		= &cm_t35_lcd_videomode,
+
+	.enable_gpio		= -1,
+	.backlight_gpio		= CM_T35_LCD_BL_GPIO,
+};
+
+static struct platform_device cm_t35_lcd_device = {
+	.name                   = "panel-dpi",
+	.id                     = 0,
+	.dev.platform_data      = &cm_t35_lcd_pdata,
 };
 
-static struct omap_dss_device cm_t35_lcd_device = {
-	.name			= "lcd",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "generic_dpi_panel",
-	.data			= &lcd_panel,
-	.phy.dpi.data_lines	= 18,
+static struct connector_dvi_platform_data cm_t35_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = -1,
 };
 
-static struct tfp410_platform_data dvi_panel = {
-	.power_down_gpio	= CM_T35_DVI_EN_GPIO,
-	.i2c_bus_num		= -1,
+static struct platform_device cm_t35_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &cm_t35_dvi_connector_pdata,
 };
 
-static struct omap_dss_device cm_t35_dvi_device = {
-	.name			= "dvi",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "tfp410",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
+static struct encoder_tfp410_platform_data cm_t35_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = CM_T35_DVI_EN_GPIO,
 };
 
-static struct omap_dss_device cm_t35_tv_device = {
-	.name			= "tv",
-	.driver_name		= "venc",
-	.type			= OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+static struct platform_device cm_t35_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &cm_t35_tfp410_pdata,
 };
 
-static struct omap_dss_device *cm_t35_dss_devices[] = {
-	&cm_t35_lcd_device,
-	&cm_t35_dvi_device,
-	&cm_t35_tv_device,
+static struct connector_atv_platform_data cm_t35_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.invert_polarity = false,
+};
+
+static struct platform_device cm_t35_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &cm_t35_tv_pdata,
 };
 
 static struct omap_dss_board_info cm_t35_dss_data = {
-	.num_devices	= ARRAY_SIZE(cm_t35_dss_devices),
-	.devices	= cm_t35_dss_devices,
-	.default_device	= &cm_t35_dvi_device,
+	.default_display_name = "dvi",
 };
 
 static struct omap2_mcspi_device_config tdo24m_mcspi_config = {
@@ -280,6 +309,11 @@ static void __init cm_t35_init_display(void)
 		pr_err("CM-T35: failed to register DSS device\n");
 		gpio_free(CM_T35_LCD_EN_GPIO);
 	}
+
+	platform_device_register(&cm_t35_tfp410_device);
+	platform_device_register(&cm_t35_dvi_connector_device);
+	platform_device_register(&cm_t35_lcd_device);
+	platform_device_register(&cm_t35_tv_connector_device);
 }
 
 static struct regulator_consumer_supply cm_t35_vmmc1_supply[] = {
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index f1d91ba..cdc4fb9 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -112,50 +112,81 @@ static struct regulator_consumer_supply devkit8000_vio_supply[] = {
 	REGULATOR_SUPPLY("vcc", "spi2.0"),
 };
 
-static struct panel_generic_dpi_data lcd_panel = {
-	.name			= "innolux_at070tn83",
-	/* gpios filled in code */
+static const struct display_timing devkit8000_lcd_videomode = {
+	.pixelclock	= { 0, 40000000, 0 },
+
+	.hactive = { 0, 800, 0 },
+	.hfront_porch = { 0, 1, 0 },
+	.hback_porch = { 0, 1, 0 },
+	.hsync_len = { 0, 48, 0 },
+
+	.vactive = { 0, 480, 0 },
+	.vfront_porch = { 0, 12, 0 },
+	.vback_porch = { 0, 25, 0 },
+	.vsync_len = { 0, 3, 0 },
+
+	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
 };
 
-static struct omap_dss_device devkit8000_lcd_device = {
+static struct panel_dpi_platform_data devkit8000_lcd_pdata = {
 	.name                   = "lcd",
-	.type                   = OMAP_DISPLAY_TYPE_DPI,
-	.driver_name            = "generic_dpi_panel",
-	.data			= &lcd_panel,
-	.phy.dpi.data_lines     = 24,
+	.source                 = "dpi.0",
+
+	.data_lines		= 24,
+
+	.display_timing		= &devkit8000_lcd_videomode,
+
+	.enable_gpio		= -1,	/* filled in code */
+	.backlight_gpio		= -1,
 };
 
-static struct tfp410_platform_data dvi_panel = {
-	.power_down_gpio	= -1,
-	.i2c_bus_num		= 1,
+static struct platform_device devkit8000_lcd_device = {
+	.name                   = "panel-dpi",
+	.id                     = 0,
+	.dev.platform_data      = &devkit8000_lcd_pdata,
 };
 
-static struct omap_dss_device devkit8000_dvi_device = {
+static struct connector_dvi_platform_data devkit8000_dvi_connector_pdata = {
 	.name                   = "dvi",
-	.type                   = OMAP_DISPLAY_TYPE_DPI,
-	.driver_name            = "tfp410",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines     = 24,
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = 1,
 };
 
-static struct omap_dss_device devkit8000_tv_device = {
-	.name                   = "tv",
-	.driver_name            = "venc",
-	.type                   = OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type          = OMAP_DSS_VENC_TYPE_SVIDEO,
+static struct platform_device devkit8000_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &devkit8000_dvi_connector_pdata,
 };
 
+static struct encoder_tfp410_platform_data devkit8000_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = -1,	/* filled in code */
+};
 
-static struct omap_dss_device *devkit8000_dss_devices[] = {
-	&devkit8000_lcd_device,
-	&devkit8000_dvi_device,
-	&devkit8000_tv_device,
+static struct platform_device devkit8000_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &devkit8000_tfp410_pdata,
+};
+
+static struct connector_atv_platform_data devkit8000_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.invert_polarity = false,
+};
+
+static struct platform_device devkit8000_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &devkit8000_tv_pdata,
 };
 
 static struct omap_dss_board_info devkit8000_dss_data = {
-	.num_devices = ARRAY_SIZE(devkit8000_dss_devices),
-	.devices = devkit8000_dss_devices,
-	.default_device = &devkit8000_lcd_device,
+	.default_display_name = "lcd",
 };
 
 static uint32_t board_keymap[] = {
@@ -204,11 +235,10 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
 	/* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */
-	lcd_panel.num_gpios = 1;
-	lcd_panel.gpios[0] = gpio + TWL4030_GPIO_MAX + 0;
+	devkit8000_lcd_pdata.enable_gpio = gpio + TWL4030_GPIO_MAX + 0;
 
 	/* gpio + 7 is "DVI_PD" (out, active low) */
-	dvi_panel.power_down_gpio = gpio + 7;
+	devkit8000_tfp410_pdata.power_down_gpio = gpio + 7;
 
 	return 0;
 }
@@ -413,6 +443,10 @@ static struct platform_device *devkit8000_devices[] __initdata = {
 	&leds_gpio,
 	&keys_gpio,
 	&omap_dm9000_dev,
+	&devkit8000_lcd_device,
+	&devkit8000_tfp410_device,
+	&devkit8000_dvi_connector_device,
+	&devkit8000_tv_connector_device,
 };
 
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index be5d005..19f1652 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -15,13 +15,10 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/irqdomain.h>
-#include <linux/clk.h>
 
 #include <asm/mach/arch.h>
 
 #include "common.h"
-#include "common-board-devices.h"
-#include "dss-common.h"
 
 #if !(defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3))
 #define intc_of_init	NULL
@@ -36,40 +33,9 @@ static struct of_device_id omap_dt_match_table[] __initdata = {
 	{ }
 };
 
-/*
- * Create alias for USB host PHY clock.
- * Remove this when clock phandle can be provided via DT
- */
-static void __init legacy_init_ehci_clk(char *clkname)
-{
-	int ret;
-
-	ret = clk_add_alias("main_clk", NULL, clkname, NULL);
-	if (ret) {
-		pr_err("%s:Failed to add main_clk alias to %s :%d\n",
-						__func__, clkname, ret);
-	}
-}
-
 static void __init omap_generic_init(void)
 {
-	omap_sdrc_init(NULL, NULL);
-
-	of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
-
-	/*
-	 * HACK: call display setup code for selected boards to enable omapdss.
-	 * This will be removed when omapdss supports DT.
-	 */
-	if (of_machine_is_compatible("ti,omap4-panda")) {
-		omap4_panda_display_init_of();
-		legacy_init_ehci_clk("auxclk3_ck");
-
-	}
-	else if (of_machine_is_compatible("ti,omap4-sdp"))
-		omap_4430sdp_display_init_of();
-	else if (of_machine_is_compatible("ti,omap5-uevm"))
-		legacy_init_ehci_clk("auxclk1_ck");
+	pdata_quirks_init(omap_dt_match_table);
 }
 
 #ifdef CONFIG_SOC_OMAP2420
@@ -129,6 +95,24 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
 	.restart	= omap3xxx_restart,
 MACHINE_END
 
+static const char *omap36xx_boards_compat[] __initdata = {
+	"ti,omap36xx",
+	NULL,
+};
+
+DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)")
+	.reserve	= omap_reserve,
+	.map_io		= omap3_map_io,
+	.init_early	= omap3630_init_early,
+	.init_irq	= omap_intc_of_init,
+	.handle_irq	= omap3_intc_handle_irq,
+	.init_machine	= omap_generic_init,
+	.init_late	= omap3_init_late,
+	.init_time	= omap3_sync32k_timer_init,
+	.dt_compat	= omap36xx_boards_compat,
+	.restart	= omap3xxx_restart,
+MACHINE_END
+
 static const char *omap3_gp_boards_compat[] __initdata = {
 	"ti,omap3-beagle",
 	"timll,omap3-devkit8000",
@@ -162,6 +146,7 @@ DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)")
 	.init_irq	= omap_intc_of_init,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_generic_init,
+	.init_late	= am33xx_init_late,
 	.init_time	= omap3_gptimer_timer_init,
 	.dt_compat	= am33xx_boards_compat,
 	.restart	= am33xx_restart,
@@ -201,6 +186,7 @@ DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)")
 	.init_early	= omap5_init_early,
 	.init_irq	= omap_gic_of_init,
 	.init_machine	= omap_generic_init,
+	.init_late	= omap5_init_late,
 	.init_time	= omap5_realtime_timer_init,
 	.dt_compat	= omap5_boards_compat,
 	.restart	= omap44xx_restart,
@@ -216,9 +202,30 @@ static const char *am43_boards_compat[] __initdata = {
 DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)")
 	.map_io		= am33xx_map_io,
 	.init_early	= am43xx_init_early,
+	.init_late	= am43xx_init_late,
 	.init_irq	= omap_gic_of_init,
 	.init_machine	= omap_generic_init,
 	.init_time	= omap3_sync32k_timer_init,
 	.dt_compat	= am43_boards_compat,
 MACHINE_END
 #endif
+
+#ifdef CONFIG_SOC_DRA7XX
+static const char *dra7xx_boards_compat[] __initdata = {
+	"ti,dra7",
+	NULL,
+};
+
+DT_MACHINE_START(DRA7XX_DT, "Generic DRA7XX (Flattened Device Tree)")
+	.reserve	= omap_reserve,
+	.smp		= smp_ops(omap4_smp_ops),
+	.map_io		= omap5_map_io,
+	.init_early	= dra7xx_init_early,
+	.init_late	= dra7xx_init_late,
+	.init_irq	= omap_gic_of_init,
+	.init_machine	= omap_generic_init,
+	.init_time	= omap5_realtime_timer_init,
+	.dt_compat	= dra7xx_boards_compat,
+	.restart	= omap44xx_restart,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 69c0acf..87e41a8 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -194,30 +194,48 @@ static struct platform_device h4_flash_device = {
 	.resource	= &h4_flash_resource,
 };
 
-static struct platform_device *h4_devices[] __initdata = {
-	&h4_flash_device,
+static const struct display_timing cm_t35_lcd_videomode = {
+	.pixelclock	= { 0, 6250000, 0 },
+
+	.hactive = { 0, 240, 0 },
+	.hfront_porch = { 0, 15, 0 },
+	.hback_porch = { 0, 60, 0 },
+	.hsync_len = { 0, 15, 0 },
+
+	.vactive = { 0, 320, 0 },
+	.vfront_porch = { 0, 1, 0 },
+	.vback_porch = { 0, 1, 0 },
+	.vsync_len = { 0, 1, 0 },
+
+	.flags = DISPLAY_FLAGS_HSYNC_HIGH | DISPLAY_FLAGS_VSYNC_HIGH |
+		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
 };
 
-static struct panel_generic_dpi_data h4_panel_data = {
-	.name			= "h4",
+static struct panel_dpi_platform_data cm_t35_lcd_pdata = {
+	.name                   = "lcd",
+	.source                 = "dpi.0",
+
+	.data_lines		= 16,
+
+	.display_timing		= &cm_t35_lcd_videomode,
+
+	.enable_gpio		= -1,
+	.backlight_gpio		= -1,
 };
 
-static struct omap_dss_device h4_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "generic_dpi_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 16,
-	.data			= &h4_panel_data,
+static struct platform_device cm_t35_lcd_device = {
+	.name                   = "panel-dpi",
+	.id                     = 0,
+	.dev.platform_data      = &cm_t35_lcd_pdata,
 };
 
-static struct omap_dss_device *h4_dss_devices[] = {
-	&h4_lcd_device,
+static struct platform_device *h4_devices[] __initdata = {
+	&h4_flash_device,
+	&cm_t35_lcd_device,
 };
 
 static struct omap_dss_board_info h4_dss_data = {
-	.num_devices	= ARRAY_SIZE(h4_dss_devices),
-	.devices	= h4_dss_devices,
-	.default_device	= &h4_lcd_device,
+	.default_display_name = "lcd",
 };
 
 /* 2420 Sysboot setup (2430 is different) */
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
deleted file mode 100644
index 87e65dd..0000000
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ /dev/null
@@ -1,710 +0,0 @@
-/*
- * Copyright (C) 2009 Integration Software and Electronic Engineering.
- *
- * Modified from mach-omap2/board-generic.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/usb/phy.h>
-
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/i2c/twl.h>
-#include <linux/mmc/host.h>
-
-#include <linux/mtd/nand.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-#include <linux/platform_data/mtd-onenand-omap2.h>
-
-#include "common.h"
-#include "gpmc.h"
-#include "mux.h"
-#include "hsmmc.h"
-#include "sdram-numonyx-m65kxxxxam.h"
-#include "common-board-devices.h"
-#include "board-flash.h"
-#include "control.h"
-#include "gpmc-onenand.h"
-
-#define IGEP2_SMSC911X_CS       5
-#define IGEP2_SMSC911X_GPIO     176
-#define IGEP2_GPIO_USBH_NRESET  24
-#define IGEP2_GPIO_LED0_GREEN   26
-#define IGEP2_GPIO_LED0_RED     27
-#define IGEP2_GPIO_LED1_RED     28
-#define IGEP2_GPIO_DVI_PUP      170
-
-#define IGEP2_RB_GPIO_WIFI_NPD     94
-#define IGEP2_RB_GPIO_WIFI_NRESET  95
-#define IGEP2_RB_GPIO_BT_NRESET    137
-#define IGEP2_RC_GPIO_WIFI_NPD     138
-#define IGEP2_RC_GPIO_WIFI_NRESET  139
-#define IGEP2_RC_GPIO_BT_NRESET    137
-
-#define IGEP3_GPIO_LED0_GREEN	54
-#define IGEP3_GPIO_LED0_RED	53
-#define IGEP3_GPIO_LED1_RED	16
-#define IGEP3_GPIO_USBH_NRESET  183
-
-#define IGEP_SYSBOOT_MASK           0x1f
-#define IGEP_SYSBOOT_NAND           0x0f
-#define IGEP_SYSBOOT_ONENAND        0x10
-
-/*
- * IGEP2 Hardware Revision Table
- *
- *  --------------------------------------------------------------------------
- * | Id. | Hw Rev.            | HW0 (28) | WIFI_NPD | WIFI_NRESET | BT_NRESET |
- *  --------------------------------------------------------------------------
- * |  0  | B                  |   high   |  gpio94  |   gpio95    |     -     |
- * |  0  | B/C (B-compatible) |   high   |  gpio94  |   gpio95    |  gpio137  |
- * |  1  | C                  |   low    |  gpio138 |   gpio139   |  gpio137  |
- *  --------------------------------------------------------------------------
- */
-
-#define IGEP2_BOARD_HWREV_B	0
-#define IGEP2_BOARD_HWREV_C	1
-#define IGEP3_BOARD_HWREV	2
-
-static u8 hwrev;
-
-static void __init igep2_get_revision(void)
-{
-	u8 ret;
-
-	if (machine_is_igep0030()) {
-		hwrev = IGEP3_BOARD_HWREV;
-		return;
-	}
-
-	omap_mux_init_gpio(IGEP2_GPIO_LED1_RED, OMAP_PIN_INPUT);
-
-	if (gpio_request_one(IGEP2_GPIO_LED1_RED, GPIOF_IN, "GPIO_HW0_REV")) {
-		pr_warning("IGEP2: Could not obtain gpio GPIO_HW0_REV\n");
-		pr_err("IGEP2: Unknown Hardware Revision\n");
-		return;
-	}
-
-	ret = gpio_get_value(IGEP2_GPIO_LED1_RED);
-	if (ret == 0) {
-		pr_info("IGEP2: Hardware Revision C (B-NON compatible)\n");
-		hwrev = IGEP2_BOARD_HWREV_C;
-	} else if (ret ==  1) {
-		pr_info("IGEP2: Hardware Revision B/C (B compatible)\n");
-		hwrev = IGEP2_BOARD_HWREV_B;
-	} else {
-		pr_err("IGEP2: Unknown Hardware Revision\n");
-		hwrev = -1;
-	}
-
-	gpio_free(IGEP2_GPIO_LED1_RED);
-}
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) ||		\
-	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) ||	\
-	defined(CONFIG_MTD_NAND_OMAP2) ||		\
-	defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-
-#define ONENAND_MAP             0x20000000
-
-/* NAND04GR4E1A ( x2 Flash built-in COMBO POP MEMORY )
- * Since the device is equipped with two DataRAMs, and two-plane NAND
- * Flash memory array, these two component enables simultaneous program
- * of 4KiB. Plane1 has only even blocks such as block0, block2, block4
- * while Plane2 has only odd blocks such as block1, block3, block5.
- * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048)
- */
-
-static struct mtd_partition igep_flash_partitions[] = {
-	{
-		.name           = "X-Loader",
-		.offset         = 0,
-		.size           = 2 * (64*(2*2048))
-	},
-	{
-		.name           = "U-Boot",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 6 * (64*(2*2048)),
-	},
-	{
-		.name           = "Environment",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 2 * (64*(2*2048)),
-	},
-	{
-		.name           = "Kernel",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 12 * (64*(2*2048)),
-	},
-	{
-		.name           = "File System",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = MTDPART_SIZ_FULL,
-	},
-};
-
-static inline u32 igep_get_sysboot_value(void)
-{
-	return omap_ctrl_readl(OMAP343X_CONTROL_STATUS) & IGEP_SYSBOOT_MASK;
-}
-
-static void __init igep_flash_init(void)
-{
-	u32 mux;
-	mux = igep_get_sysboot_value();
-
-	if (mux == IGEP_SYSBOOT_NAND) {
-		pr_info("IGEP: initializing NAND memory device\n");
-		board_nand_init(igep_flash_partitions,
-				ARRAY_SIZE(igep_flash_partitions),
-				0, NAND_BUSWIDTH_16, nand_default_timings);
-	} else if (mux == IGEP_SYSBOOT_ONENAND) {
-		pr_info("IGEP: initializing OneNAND memory device\n");
-		board_onenand_init(igep_flash_partitions,
-				   ARRAY_SIZE(igep_flash_partitions), 0);
-	} else {
-		pr_err("IGEP: Flash: unsupported sysboot sequence found\n");
-	}
-}
-
-#else
-static void __init igep_flash_init(void) {}
-#endif
-
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-
-#include <linux/smsc911x.h>
-#include "gpmc-smsc911x.h"
-
-static struct omap_smsc911x_platform_data smsc911x_cfg = {
-	.cs             = IGEP2_SMSC911X_CS,
-	.gpio_irq       = IGEP2_SMSC911X_GPIO,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static inline void __init igep2_init_smsc911x(void)
-{
-	gpmc_smsc911x_init(&smsc911x_cfg);
-}
-
-#else
-static inline void __init igep2_init_smsc911x(void) { }
-#endif
-
-static struct regulator_consumer_supply igep_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
-static struct regulator_init_data igep_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(igep_vmmc1_supply),
-	.consumer_supplies      = igep_vmmc1_supply,
-};
-
-static struct regulator_consumer_supply igep_vio_supply[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"),
-};
-
-static struct regulator_init_data igep_vio = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= 1,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(igep_vio_supply),
-	.consumer_supplies      = igep_vio_supply,
-};
-
-static struct regulator_consumer_supply igep_vmmc2_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-static struct regulator_init_data igep_vmmc2 = {
-	.constraints		= {
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
-		.always_on		= 1,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(igep_vmmc2_supply),
-	.consumer_supplies	= igep_vmmc2_supply,
-};
-
-static struct fixed_voltage_config igep_vwlan = {
-	.supply_name		= "vwlan",
-	.microvolts		= 3300000,
-	.gpio			= -EINVAL,
-	.enabled_at_boot	= 1,
-	.init_data		= &igep_vmmc2,
-};
-
-static struct platform_device igep_vwlan_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 0,
-	.dev = {
-		.platform_data	= &igep_vwlan,
-	},
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.deferred	= true,
-	},
-#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
-	{
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-#endif
-	{}      /* Terminator */
-};
-
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-#include <linux/leds.h>
-
-static struct gpio_led igep_gpio_leds[] = {
-	[0] = {
-		.name			= "omap3:red:user0",
-		.default_state		= 0,
-	},
-	[1] = {
-		.name			= "omap3:green:boot",
-		.default_state		= 1,
-	},
-	[2] = {
-		.name			= "omap3:red:user1",
-		.default_state		= 0,
-	},
-	[3] = {
-		.name			= "omap3:green:user1",
-		.default_state		= 0,
-		.gpio			= -EINVAL, /* gets replaced */
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data igep_led_pdata = {
-	.leds           = igep_gpio_leds,
-	.num_leds       = ARRAY_SIZE(igep_gpio_leds),
-};
-
-static struct platform_device igep_led_device = {
-	 .name   = "leds-gpio",
-	 .id     = -1,
-	 .dev    = {
-		 .platform_data  =  &igep_led_pdata,
-	},
-};
-
-static void __init igep_leds_init(void)
-{
-	if (machine_is_igep0020()) {
-		igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED;
-		igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN;
-		igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED;
-	} else {
-		igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED;
-		igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN;
-		igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED;
-	}
-
-	platform_device_register(&igep_led_device);
-}
-
-#else
-static struct gpio igep_gpio_leds[] __initdata = {
-	{ -EINVAL,	GPIOF_OUT_INIT_LOW, "gpio-led:red:d0"   },
-	{ -EINVAL,	GPIOF_OUT_INIT_LOW, "gpio-led:green:d0" },
-	{ -EINVAL,	GPIOF_OUT_INIT_LOW, "gpio-led:red:d1"   },
-};
-
-static inline void igep_leds_init(void)
-{
-	int i;
-
-	if (machine_is_igep0020()) {
-		igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED;
-		igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN;
-		igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED;
-	} else {
-		igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED;
-		igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN;
-		igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED;
-	}
-
-	if (gpio_request_array(igep_gpio_leds, ARRAY_SIZE(igep_gpio_leds))) {
-		pr_warning("IGEP v2: Could not obtain leds gpios\n");
-		return;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(igep_gpio_leds); i++)
-		gpio_export(igep_gpio_leds[i].gpio, 0);
-}
-#endif
-
-static struct gpio igep2_twl_gpios[] = {
-	{ -EINVAL, GPIOF_IN,		"GPIO_EHCI_NOC"  },
-	{ -EINVAL, GPIOF_OUT_INIT_LOW,	"GPIO_USBH_CPEN" },
-};
-
-static int igep_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-	int ret;
-
-	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	mmc[0].gpio_cd = gpio + 0;
-	omap_hsmmc_late_init(mmc);
-
-	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
-#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
-	ret = gpio_request_one(gpio + TWL4030_GPIO_MAX + 1, GPIOF_OUT_INIT_HIGH,
-			       "gpio-led:green:d1");
-	if (ret == 0)
-		gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0);
-	else
-		pr_warning("IGEP: Could not obtain gpio GPIO_LED1_GREEN\n");
-#else
-	igep_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1;
-#endif
-
-	if (machine_is_igep0030())
-		return 0;
-
-	/*
-	 * REVISIT: need ehci-omap hooks for external VBUS
-	 * power switch and overcurrent detect
-	 */
-	igep2_twl_gpios[0].gpio = gpio + 1;
-
-	/* TWL4030_GPIO_MAX + 0 == ledA, GPIO_USBH_CPEN (out, active low) */
-	igep2_twl_gpios[1].gpio = gpio + TWL4030_GPIO_MAX;
-
-	ret = gpio_request_array(igep2_twl_gpios, ARRAY_SIZE(igep2_twl_gpios));
-	if (ret < 0)
-		pr_err("IGEP2: Could not obtain gpio for USBH_CPEN");
-
-	return 0;
-};
-
-static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
-	.use_leds	= true,
-	.setup		= igep_twl_gpio_setup,
-};
-
-static struct tfp410_platform_data dvi_panel = {
-	.i2c_bus_num		= 3,
-	.power_down_gpio	= IGEP2_GPIO_DVI_PUP,
-};
-
-static struct omap_dss_device igep2_dvi_device = {
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.name			= "dvi",
-	.driver_name		= "tfp410",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
-};
-
-static struct omap_dss_device *igep2_dss_devices[] = {
-	&igep2_dvi_device
-};
-
-static struct omap_dss_board_info igep2_dss_data = {
-	.num_devices	= ARRAY_SIZE(igep2_dss_devices),
-	.devices	= igep2_dss_devices,
-	.default_device	= &igep2_dvi_device,
-};
-
-static struct platform_device *igep_devices[] __initdata = {
-	&igep_vwlan_device,
-};
-
-static int igep2_keymap[] = {
-	KEY(0, 0, KEY_LEFT),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_A),
-	KEY(0, 3, KEY_B),
-	KEY(1, 0, KEY_DOWN),
-	KEY(1, 1, KEY_UP),
-	KEY(1, 2, KEY_E),
-	KEY(1, 3, KEY_F),
-	KEY(2, 0, KEY_ENTER),
-	KEY(2, 1, KEY_I),
-	KEY(2, 2, KEY_J),
-	KEY(2, 3, KEY_K),
-	KEY(3, 0, KEY_M),
-	KEY(3, 1, KEY_N),
-	KEY(3, 2, KEY_O),
-	KEY(3, 3, KEY_P)
-};
-
-static struct matrix_keymap_data igep2_keymap_data = {
-	.keymap			= igep2_keymap,
-	.keymap_size		= ARRAY_SIZE(igep2_keymap),
-};
-
-static struct twl4030_keypad_data igep2_keypad_pdata = {
-	.keymap_data	= &igep2_keymap_data,
-	.rows		= 4,
-	.cols		= 4,
-	.rep		= 1,
-};
-
-static struct twl4030_platform_data igep_twldata = {
-	/* platform_data for children goes here */
-	.gpio		= &igep_twl4030_gpio_pdata,
-	.vmmc1          = &igep_vmmc1,
-	.vio		= &igep_vio,
-};
-
-static struct i2c_board_info __initdata igep2_i2c3_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("eeprom", 0x50),
-	},
-};
-
-static void __init igep_i2c_init(void)
-{
-	int ret;
-
-	omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB,
-			      TWL_COMMON_REGULATOR_VPLL2);
-	igep_twldata.vpll2->constraints.apply_uV = true;
-	igep_twldata.vpll2->constraints.name = "VDVI";
-
-	if (machine_is_igep0020()) {
-		/*
-		 * Bus 3 is attached to the DVI port where devices like the
-		 * pico DLP projector don't work reliably with 400kHz
-		 */
-		ret = omap_register_i2c_bus(3, 100, igep2_i2c3_boardinfo,
-					    ARRAY_SIZE(igep2_i2c3_boardinfo));
-		if (ret)
-			pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret);
-
-		igep_twldata.keypad	= &igep2_keypad_pdata;
-		/* Get common pmic data */
-		omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO, 0);
-	}
-
-	omap3_pmic_init("twl4030", &igep_twldata);
-}
-
-static struct usbhs_phy_data igep2_phy_data[] __initdata = {
-	{
-		.port = 1,
-		.reset_gpio = IGEP2_GPIO_USBH_NRESET,
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct usbhs_phy_data igep3_phy_data[] __initdata = {
-	{
-		.port = 2,
-		.reset_gpio = IGEP3_GPIO_USBH_NRESET,
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct usbhs_omap_platform_data igep2_usbhs_bdata __initdata = {
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = {
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	/* Display Sub System */
-	OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	/* TFP410 PanelBus DVI Transmitte (GPIO_170) */
-	OMAP3_MUX(HDQ_SIO, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	/* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */
-	OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
-static struct gpio igep_wlan_bt_gpios[] __initdata = {
-	{ -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NPD"	   },
-	{ -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NRESET" },
-	{ -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_BT_NRESET"   },
-};
-
-static void __init igep_wlan_bt_init(void)
-{
-	int err;
-
-	/* GPIO's for WLAN-BT combo depends on hardware revision */
-	if (hwrev == IGEP2_BOARD_HWREV_B) {
-		igep_wlan_bt_gpios[0].gpio = IGEP2_RB_GPIO_WIFI_NPD;
-		igep_wlan_bt_gpios[1].gpio = IGEP2_RB_GPIO_WIFI_NRESET;
-		igep_wlan_bt_gpios[2].gpio = IGEP2_RB_GPIO_BT_NRESET;
-	} else if (hwrev == IGEP2_BOARD_HWREV_C || machine_is_igep0030()) {
-		igep_wlan_bt_gpios[0].gpio = IGEP2_RC_GPIO_WIFI_NPD;
-		igep_wlan_bt_gpios[1].gpio = IGEP2_RC_GPIO_WIFI_NRESET;
-		igep_wlan_bt_gpios[2].gpio = IGEP2_RC_GPIO_BT_NRESET;
-	} else
-		return;
-
-	/* Make sure that the GPIO pins are muxed correctly */
-	omap_mux_init_gpio(igep_wlan_bt_gpios[0].gpio, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(igep_wlan_bt_gpios[1].gpio, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(igep_wlan_bt_gpios[2].gpio, OMAP_PIN_OUTPUT);
-
-	err = gpio_request_array(igep_wlan_bt_gpios,
-				 ARRAY_SIZE(igep_wlan_bt_gpios));
-	if (err) {
-		pr_warning("IGEP2: Could not obtain WIFI/BT gpios\n");
-		return;
-	}
-
-	gpio_export(igep_wlan_bt_gpios[0].gpio, 0);
-	gpio_export(igep_wlan_bt_gpios[1].gpio, 0);
-	gpio_export(igep_wlan_bt_gpios[2].gpio, 0);
-
-	gpio_set_value(igep_wlan_bt_gpios[1].gpio, 0);
-	udelay(10);
-	gpio_set_value(igep_wlan_bt_gpios[1].gpio, 1);
-
-}
-#else
-static inline void __init igep_wlan_bt_init(void) { }
-#endif
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-static void __init igep_init(void)
-{
-	regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-
-	/* Get IGEP2 hardware revision */
-	igep2_get_revision();
-
-	omap_hsmmc_init(mmc);
-
-	/* Register I2C busses and drivers */
-	igep_i2c_init();
-	platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices));
-	omap_serial_init();
-	omap_sdrc_init(m65kxxxxam_sdrc_params,
-				  m65kxxxxam_sdrc_params);
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(NULL);
-
-	igep_flash_init();
-	igep_leds_init();
-	omap_twl4030_audio_init("igep2", NULL);
-
-	/*
-	 * WLAN-BT combo module from MuRata which has a Marvell WLAN
-	 * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface.
-	 */
-	igep_wlan_bt_init();
-
-	if (machine_is_igep0020()) {
-		omap_display_init(&igep2_dss_data);
-		igep2_init_smsc911x();
-		usbhs_init_phys(igep2_phy_data, ARRAY_SIZE(igep2_phy_data));
-		usbhs_init(&igep2_usbhs_bdata);
-	} else {
-		usbhs_init_phys(igep3_phy_data, ARRAY_SIZE(igep3_phy_data));
-		usbhs_init(&igep3_usbhs_bdata);
-	}
-}
-
-MACHINE_START(IGEP0020, "IGEP v2 board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= igep_init,
-	.init_late	= omap35xx_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
-
-MACHINE_START(IGEP0030, "IGEP OMAP3 module")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= igep_init,
-	.init_late	= omap35xx_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 62e4f70..4ec8d82 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -36,7 +36,6 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
-#include "board-zoom.h"
 #include "gpmc.h"
 #include "gpmc-smsc911x.h"
 
@@ -184,45 +183,70 @@ static inline void __init ldp_init_smsc911x(void)
 #define LCD_PANEL_RESET_GPIO		55
 #define LCD_PANEL_QVGA_GPIO		56
 
-static struct panel_generic_dpi_data ldp_panel_data = {
-	.name			= "nec_nl2432dr22-11b",
-	.num_gpios		= 4,
-	/* gpios filled in code */
+static const struct display_timing ldp_lcd_videomode = {
+	.pixelclock	= { 0, 5400000, 0 },
+
+	.hactive = { 0, 240, 0 },
+	.hfront_porch = { 0, 3, 0 },
+	.hback_porch = { 0, 39, 0 },
+	.hsync_len = { 0, 3, 0 },
+
+	.vactive = { 0, 320, 0 },
+	.vfront_porch = { 0, 2, 0 },
+	.vback_porch = { 0, 7, 0 },
+	.vsync_len = { 0, 1, 0 },
+
+	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
 };
 
-static struct omap_dss_device ldp_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "generic_dpi_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 18,
-	.data			= &ldp_panel_data,
+static struct panel_dpi_platform_data ldp_lcd_pdata = {
+	.name                   = "lcd",
+	.source                 = "dpi.0",
+
+	.data_lines		= 18,
+
+	.display_timing		= &ldp_lcd_videomode,
+
+	.enable_gpio		= -1,	/* filled in code */
+	.backlight_gpio		= -1,	/* filled in code */
 };
 
-static struct omap_dss_device *ldp_dss_devices[] = {
-	&ldp_lcd_device,
+static struct platform_device ldp_lcd_device = {
+	.name                   = "panel-dpi",
+	.id                     = 0,
+	.dev.platform_data      = &ldp_lcd_pdata,
 };
 
 static struct omap_dss_board_info ldp_dss_data = {
-	.num_devices	= ARRAY_SIZE(ldp_dss_devices),
-	.devices	= ldp_dss_devices,
-	.default_device	= &ldp_lcd_device,
+	.default_display_name = "lcd",
 };
 
 static void __init ldp_display_init(void)
 {
-	ldp_panel_data.gpios[2] = LCD_PANEL_RESET_GPIO;
-	ldp_panel_data.gpios[3] = LCD_PANEL_QVGA_GPIO;
+	int r;
+
+	static struct gpio gpios[] __initdata = {
+		{LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"},
+		{LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"},
+	};
+
+	r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
+	if (r) {
+		pr_err("Cannot request LCD GPIOs, error %d\n", r);
+		return;
+	}
 
 	omap_display_init(&ldp_dss_data);
 }
 
 static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
 {
-	ldp_panel_data.gpios[0] = gpio + 7;
-	ldp_panel_data.gpio_invert[0] = true;
+	/* LCD enable GPIO */
+	ldp_lcd_pdata.enable_gpio = gpio + 7;
 
-	ldp_panel_data.gpios[1] = gpio + 15;
-	ldp_panel_data.gpio_invert[1] = true;
+	/* Backlight enable GPIO */
+	ldp_lcd_pdata.backlight_gpio = gpio + 15;
 
 	return 0;
 }
@@ -322,6 +346,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
 
 static struct platform_device *ldp_devices[] __initdata = {
 	&ldp_gpio_keys_device,
+	&ldp_lcd_device,
 };
 
 #ifdef CONFIG_OMAP_MUX
@@ -380,7 +405,7 @@ static void __init omap_ldp_init(void)
 	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
-			ZOOM_NAND_CS, 0, nand_default_timings);
+			0, 0, nand_default_timings);
 
 	omap_hsmmc_init(mmc);
 	ldp_display_init();
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 04c1165..8b9cd06 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -33,7 +33,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mmc/host.h>
 #include <linux/usb/phy.h>
-#include <linux/usb/nop-usb-xceiv.h>
+#include <linux/usb/usb_phy_gen_xceiv.h>
 
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
@@ -225,35 +225,46 @@ static struct mtd_partition omap3beagle_nand_partitions[] = {
 
 /* DSS */
 
-static struct tfp410_platform_data dvi_panel = {
-	.i2c_bus_num = 3,
-	.power_down_gpio = -1,
+static struct connector_dvi_platform_data beagle_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = 3,
 };
 
-static struct omap_dss_device beagle_dvi_device = {
-	.type = OMAP_DISPLAY_TYPE_DPI,
-	.name = "dvi",
-	.driver_name = "tfp410",
-	.data = &dvi_panel,
-	.phy.dpi.data_lines = 24,
+static struct platform_device beagle_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &beagle_dvi_connector_pdata,
 };
 
-static struct omap_dss_device beagle_tv_device = {
+static struct encoder_tfp410_platform_data beagle_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = -1,
+};
+
+static struct platform_device beagle_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &beagle_tfp410_pdata,
+};
+
+static struct connector_atv_platform_data beagle_tv_pdata = {
 	.name = "tv",
-	.driver_name = "venc",
-	.type = OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.invert_polarity = false,
 };
 
-static struct omap_dss_device *beagle_dss_devices[] = {
-	&beagle_dvi_device,
-	&beagle_tv_device,
+static struct platform_device beagle_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &beagle_tv_pdata,
 };
 
 static struct omap_dss_board_info beagle_dss_data = {
-	.num_devices = ARRAY_SIZE(beagle_dss_devices),
-	.devices = beagle_dss_devices,
-	.default_device = &beagle_dvi_device,
+	.default_display_name = "dvi",
 };
 
 #include "sdram-micron-mt46h32m32lf-6.h"
@@ -278,18 +289,12 @@ static struct regulator_consumer_supply beagle_vsim_supply[] = {
 
 static struct gpio_led gpio_leds[];
 
-/* PHY's VCC regulator might be added later, so flag that we need it */
-static struct nop_usb_xceiv_platform_data hsusb2_phy_data = {
-	.needs_vcc = true,
-};
-
 static struct usbhs_phy_data phy_data[] = {
 	{
 		.port = 2,
 		.reset_gpio = 147,
 		.vcc_gpio = -1,		/* updated in beagle_twl_gpio_setup */
 		.vcc_polarity = 1,	/* updated in beagle_twl_gpio_setup */
-		.platform_data = &hsusb2_phy_data,
 	},
 };
 
@@ -332,7 +337,11 @@ static int beagle_twl_gpio_setup(struct device *dev,
 		if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
 			pr_err("%s: unable to configure EHCI_nOC\n", __func__);
 	}
-	dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio;
+	beagle_tfp410_pdata.power_down_gpio = beagle_config.dvi_pd_gpio;
+
+	platform_device_register(&beagle_tfp410_device);
+	platform_device_register(&beagle_dvi_connector_device);
+	platform_device_register(&beagle_tv_connector_device);
 
 	/* TWL4030_GPIO_MAX i.e. LED_GPO controls HS USB Port 2 power */
 	phy_data[0].vcc_gpio = gpio + TWL4030_GPIO_MAX;
@@ -547,6 +556,7 @@ static void __init omap3_beagle_init(void)
 	if (gpio_is_valid(beagle_config.dvi_pd_gpio))
 		omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT);
 	omap_display_init(&beagle_dss_data);
+
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
deleted file mode 100644
index 8c02626..0000000
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ /dev/null
@@ -1,739 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-omap3evm.c
- *
- * Copyright (C) 2008 Texas Instruments
- *
- * Modified from mach-omap2/board-3430sdp.c
- *
- * Initial code: Syed Mohammed Khasim
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/leds.h>
-#include <linux/interrupt.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/i2c/twl.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/musb.h>
-#include <linux/usb/nop-usb-xceiv.h>
-#include <linux/smsc911x.h>
-
-#include <linux/wl12xx.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/mmc/host.h>
-#include <linux/export.h>
-#include <linux/usb/phy.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/platform_data/mtd-nand-omap2.h>
-#include "common.h"
-#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "soc.h"
-#include "mux.h"
-#include "sdram-micron-mt46h32m32lf-6.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-#include "board-flash.h"
-
-#define	NAND_CS			0
-
-#define OMAP3_EVM_TS_GPIO	175
-#define OMAP3_EVM_EHCI_VBUS	22
-#define OMAP3_EVM_EHCI_SELECT	61
-
-#define OMAP3EVM_ETHR_START	0x2c000000
-#define OMAP3EVM_ETHR_SIZE	1024
-#define OMAP3EVM_ETHR_ID_REV	0x50
-#define OMAP3EVM_ETHR_GPIO_IRQ	176
-#define OMAP3EVM_SMSC911X_CS	5
-/*
- * Eth Reset signal
- *	64 = Generation 1 (<=RevD)
- *	7 = Generation 2 (>=RevE)
- */
-#define OMAP3EVM_GEN1_ETHR_GPIO_RST	64
-#define OMAP3EVM_GEN2_ETHR_GPIO_RST	7
-
-/*
- * OMAP35x EVM revision
- * Run time detection of EVM revision is done by reading Ethernet
- * PHY ID -
- *	GEN_1	= 0x01150000
- *	GEN_2	= 0x92200000
- */
-enum {
-	OMAP3EVM_BOARD_GEN_1 = 0,	/* EVM Rev between  A - D */
-	OMAP3EVM_BOARD_GEN_2,		/* EVM Rev >= Rev E */
-};
-
-static u8 omap3_evm_version;
-
-static u8 get_omap3_evm_rev(void)
-{
-	return omap3_evm_version;
-}
-
-static void __init omap3_evm_get_revision(void)
-{
-	void __iomem *ioaddr;
-	unsigned int smsc_id;
-
-	/* Ethernet PHY ID is stored at ID_REV register */
-	ioaddr = ioremap_nocache(OMAP3EVM_ETHR_START, SZ_1K);
-	if (!ioaddr)
-		return;
-	smsc_id = readl(ioaddr + OMAP3EVM_ETHR_ID_REV) & 0xFFFF0000;
-	iounmap(ioaddr);
-
-	switch (smsc_id) {
-	/*SMSC9115 chipset*/
-	case 0x01150000:
-		omap3_evm_version = OMAP3EVM_BOARD_GEN_1;
-		break;
-	/*SMSC 9220 chipset*/
-	case 0x92200000:
-	default:
-		omap3_evm_version = OMAP3EVM_BOARD_GEN_2;
-	}
-}
-
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-#include "gpmc-smsc911x.h"
-
-static struct omap_smsc911x_platform_data smsc911x_cfg = {
-	.cs             = OMAP3EVM_SMSC911X_CS,
-	.gpio_irq       = OMAP3EVM_ETHR_GPIO_IRQ,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static inline void __init omap3evm_init_smsc911x(void)
-{
-	/* Configure ethernet controller reset gpio */
-	if (cpu_is_omap3430()) {
-		if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1)
-			smsc911x_cfg.gpio_reset = OMAP3EVM_GEN1_ETHR_GPIO_RST;
-		else
-			smsc911x_cfg.gpio_reset = OMAP3EVM_GEN2_ETHR_GPIO_RST;
-	}
-
-	gpmc_smsc911x_init(&smsc911x_cfg);
-}
-
-#else
-static inline void __init omap3evm_init_smsc911x(void) { return; }
-#endif
-
-/*
- * OMAP3EVM LCD Panel control signals
- */
-#define OMAP3EVM_LCD_PANEL_LR		2
-#define OMAP3EVM_LCD_PANEL_UD		3
-#define OMAP3EVM_LCD_PANEL_INI		152
-#define OMAP3EVM_LCD_PANEL_QVGA		154
-#define OMAP3EVM_LCD_PANEL_RESB		155
-
-#define OMAP3EVM_LCD_PANEL_ENVDD	153
-#define OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO	210
-
-/*
- * OMAP3EVM DVI control signals
- */
-#define OMAP3EVM_DVI_PANEL_EN_GPIO	199
-
-static struct panel_sharp_ls037v7dw01_data omap3_evm_lcd_data = {
-	.resb_gpio = OMAP3EVM_LCD_PANEL_RESB,
-	.ini_gpio = OMAP3EVM_LCD_PANEL_INI,
-	.mo_gpio = OMAP3EVM_LCD_PANEL_QVGA,
-	.lr_gpio = OMAP3EVM_LCD_PANEL_LR,
-	.ud_gpio = OMAP3EVM_LCD_PANEL_UD,
-};
-
-#ifdef CONFIG_BROKEN
-static void __init omap3_evm_display_init(void)
-{
-	int r;
-
-	r = gpio_request_one(OMAP3EVM_LCD_PANEL_ENVDD, GPIOF_OUT_INIT_LOW,
-				"lcd_panel_envdd");
-	if (r)
-		pr_err("failed to get lcd_panel_envdd GPIO\n");
-
-	r = gpio_request_one(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO,
-				GPIOF_OUT_INIT_LOW, "lcd_panel_bklight");
-	if (r)
-		pr_err("failed to get lcd_panel_bklight GPIO\n");
-
-	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
-		gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
-	else
-		gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
-}
-#endif
-
-static struct omap_dss_device omap3_evm_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "sharp_ls_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 18,
-	.data			= &omap3_evm_lcd_data,
-};
-
-static struct omap_dss_device omap3_evm_tv_device = {
-	.name			= "tv",
-	.driver_name		= "venc",
-	.type			= OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
-};
-
-static struct tfp410_platform_data dvi_panel = {
-	.power_down_gpio	= OMAP3EVM_DVI_PANEL_EN_GPIO,
-	.i2c_bus_num		= -1,
-};
-
-static struct omap_dss_device omap3_evm_dvi_device = {
-	.name			= "dvi",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "tfp410",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
-};
-
-static struct omap_dss_device *omap3_evm_dss_devices[] = {
-	&omap3_evm_lcd_device,
-	&omap3_evm_tv_device,
-	&omap3_evm_dvi_device,
-};
-
-static struct omap_dss_board_info omap3_evm_dss_data = {
-	.num_devices	= ARRAY_SIZE(omap3_evm_dss_devices),
-	.devices	= omap3_evm_dss_devices,
-	.default_device	= &omap3_evm_lcd_device,
-};
-
-static struct regulator_consumer_supply omap3evm_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply omap3evm_vsim_supply[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data omap3evm_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vmmc1_supply),
-	.consumer_supplies	= omap3evm_vmmc1_supply,
-};
-
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data omap3evm_vsim = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 3000000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vsim_supply),
-	.consumer_supplies	= omap3evm_vsim_supply,
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= 63,
-		.deferred	= true,
-	},
-#ifdef CONFIG_WILINK_PLATFORM_DATA
-	{
-		.name		= "wl1271",
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
-		.gpio_wp	= -EINVAL,
-		.gpio_cd	= -EINVAL,
-		.nonremovable	= true,
-	},
-#endif
-	{}	/* Terminator */
-};
-
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "omap3evm::ledb",
-		/* normally not visible (board underside) */
-		.default_trigger	= "default-on",
-		.gpio			= -EINVAL,	/* gets replaced */
-		.active_low		= true,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	},
-};
-
-
-static int omap3evm_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-	int r, lcd_bl_en;
-
-	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	mmc[0].gpio_cd = gpio + 0;
-	omap_hsmmc_late_init(mmc);
-
-	/*
-	 * Most GPIOs are for USB OTG.  Some are mostly sent to
-	 * the P2 connector; notably LEDA for the LCD backlight.
-	 */
-
-	/* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */
-	lcd_bl_en = get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2 ?
-		GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-	r = gpio_request_one(gpio + TWL4030_GPIO_MAX, lcd_bl_en, "EN_LCD_BKL");
-	if (r)
-		printk(KERN_ERR "failed to get/set lcd_bkl gpio\n");
-
-	/* gpio + 7 == DVI Enable */
-	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI");
-
-	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
-	gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1;
-
-	platform_device_register(&leds_gpio);
-
-	/* Enable VBUS switch by setting TWL4030.GPIO2DIR as output
-	 * for starting USB tranceiver
-	 */
-#ifdef CONFIG_TWL4030_CORE
-	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
-		u8 val;
-
-		twl_i2c_read_u8(TWL4030_MODULE_GPIO, &val, REG_GPIODATADIR1);
-		val |= 0x04; /* TWL4030.GPIO2DIR BIT at GPIODATADIR1(0x9B) */
-		twl_i2c_write_u8(TWL4030_MODULE_GPIO, val, REG_GPIODATADIR1);
-	}
-#endif
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
-	.use_leds	= true,
-	.setup		= omap3evm_twl_gpio_setup,
-};
-
-static uint32_t board_keymap[] = {
-	KEY(0, 0, KEY_LEFT),
-	KEY(0, 1, KEY_DOWN),
-	KEY(0, 2, KEY_ENTER),
-	KEY(0, 3, KEY_M),
-
-	KEY(1, 0, KEY_RIGHT),
-	KEY(1, 1, KEY_UP),
-	KEY(1, 2, KEY_I),
-	KEY(1, 3, KEY_N),
-
-	KEY(2, 0, KEY_A),
-	KEY(2, 1, KEY_E),
-	KEY(2, 2, KEY_J),
-	KEY(2, 3, KEY_O),
-
-	KEY(3, 0, KEY_B),
-	KEY(3, 1, KEY_F),
-	KEY(3, 2, KEY_K),
-	KEY(3, 3, KEY_P)
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data omap3evm_kp_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 4,
-	.cols		= 4,
-	.rep		= 1,
-};
-
-/* ads7846 on SPI */
-static struct regulator_consumer_supply omap3evm_vio_supply[] = {
-	REGULATOR_SUPPLY("vcc", "spi1.0"),
-};
-
-/* VIO for ads7846 */
-static struct regulator_init_data omap3evm_vio = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vio_supply),
-	.consumer_supplies	= omap3evm_vio_supply,
-};
-
-#ifdef CONFIG_WILINK_PLATFORM_DATA
-
-#define OMAP3EVM_WLAN_PMENA_GPIO	(150)
-#define OMAP3EVM_WLAN_IRQ_GPIO		(149)
-
-static struct regulator_consumer_supply omap3evm_vmmc2_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-/* VMMC2 for driving the WL12xx module */
-static struct regulator_init_data omap3evm_vmmc2 = {
-	.constraints = {
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vmmc2_supply),
-	.consumer_supplies	= omap3evm_vmmc2_supply,
-};
-
-static struct fixed_voltage_config omap3evm_vwlan = {
-	.supply_name		= "vwl1271",
-	.microvolts		= 1800000, /* 1.80V */
-	.gpio			= OMAP3EVM_WLAN_PMENA_GPIO,
-	.startup_delay		= 70000, /* 70ms */
-	.enable_high		= 1,
-	.enabled_at_boot	= 0,
-	.init_data		= &omap3evm_vmmc2,
-};
-
-static struct platform_device omap3evm_wlan_regulator = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &omap3evm_vwlan,
-	},
-};
-
-struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
-	.board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
-};
-#endif
-
-/* VAUX2 for USB */
-static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = {
-	REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"),	/* OMAP ISP */
-	REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"),	/* OMAP ISP */
-	REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"),	/* hsusb port 2 */
-	REGULATOR_SUPPLY("vaux2", NULL),
-};
-
-static struct regulator_init_data omap3evm_vaux2 = {
-	.constraints = {
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(omap3evm_vaux2_supplies),
-	.consumer_supplies		= omap3evm_vaux2_supplies,
-};
-
-static struct twl4030_platform_data omap3evm_twldata = {
-	/* platform_data for children goes here */
-	.keypad		= &omap3evm_kp_data,
-	.gpio		= &omap3evm_gpio_data,
-	.vio		= &omap3evm_vio,
-	.vmmc1		= &omap3evm_vmmc1,
-	.vsim		= &omap3evm_vsim,
-};
-
-static int __init omap3_evm_i2c_init(void)
-{
-	omap3_pmic_get_config(&omap3evm_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
-			TWL_COMMON_PDATA_AUDIO,
-			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-
-	omap3evm_twldata.vdac->constraints.apply_uV = true;
-	omap3evm_twldata.vpll2->constraints.apply_uV = true;
-
-	omap3_pmic_init("twl4030", &omap3evm_twldata);
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	return 0;
-}
-
-static struct usbhs_phy_data phy_data[] __initdata = {
-	{
-		.port = 2,
-		.reset_gpio = -1,	/* set at runtime */
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux omap35x_board_mux[] __initdata = {
-	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
-				OMAP_PIN_OFF_WAKEUPENABLE),
-	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
-				OMAP_PIN_OFF_WAKEUPENABLE),
-	OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(GPMC_WAIT2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_NONE),
-#ifdef CONFIG_WILINK_PLATFORM_DATA
-	/* WLAN IRQ - GPIO 149 */
-	OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-
-	/* WLAN POWER ENABLE - GPIO 150 */
-	OMAP3_MUX(UART1_CTS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-
-	/* MMC2 SDIO pin muxes for WL12xx */
-	OMAP3_MUX(SDMMC2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-#endif
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-static struct omap_board_mux omap36x_board_mux[] __initdata = {
-	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
-				OMAP_PIN_OFF_WAKEUPENABLE),
-	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
-				OMAP_PIN_OFF_WAKEUPENABLE),
-	/* AM/DM37x EVM: DSS data bus muxed with sys_boot */
-	OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT0, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT1, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT3, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT4, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT6, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-#ifdef CONFIG_WILINK_PLATFORM_DATA
-	/* WLAN IRQ - GPIO 149 */
-	OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-
-	/* WLAN POWER ENABLE - GPIO 150 */
-	OMAP3_MUX(UART1_CTS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-
-	/* MMC2 SDIO pin muxes for WL12xx */
-	OMAP3_MUX(SDMMC2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-#endif
-
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define omap35x_board_mux	NULL
-#define omap36x_board_mux	NULL
-#endif
-
-static struct omap_musb_board_data musb_board_data = {
-	.interface_type		= MUSB_INTERFACE_ULPI,
-	.mode			= MUSB_OTG,
-	.power			= 100,
-};
-
-static struct gpio omap3_evm_ehci_gpios[] __initdata = {
-	{ OMAP3_EVM_EHCI_VBUS,	 GPIOF_OUT_INIT_HIGH,  "enable EHCI VBUS" },
-	{ OMAP3_EVM_EHCI_SELECT, GPIOF_OUT_INIT_LOW,   "select EHCI port" },
-};
-
-static void __init omap3_evm_wl12xx_init(void)
-{
-#ifdef CONFIG_WILINK_PLATFORM_DATA
-	int ret;
-
-	/* WL12xx WLAN Init */
-	omap3evm_wlan_data.irq = gpio_to_irq(OMAP3EVM_WLAN_IRQ_GPIO);
-	ret = wl12xx_set_platform_data(&omap3evm_wlan_data);
-	if (ret)
-		pr_err("error setting wl12xx data: %d\n", ret);
-	ret = platform_device_register(&omap3evm_wlan_regulator);
-	if (ret)
-		pr_err("error registering wl12xx device: %d\n", ret);
-#endif
-}
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-static struct mtd_partition omap3evm_nand_partitions[] = {
-	/* All the partition sizes are listed in terms of NAND block size */
-	{
-		.name           = "X-Loader",
-		.offset         = 0,
-		.size           = 4*(SZ_128K),
-		.mask_flags     = MTD_WRITEABLE
-	},
-	{
-		.name           = "U-Boot",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 14*(SZ_128K),
-		.mask_flags     = MTD_WRITEABLE
-	},
-	{
-		.name           = "U-Boot Env",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 2*(SZ_128K)
-	},
-	{
-		.name           = "Kernel",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 40*(SZ_128K)
-	},
-	{
-		.name           = "File system",
-		.size           = MTDPART_SIZ_FULL,
-		.offset         = MTDPART_OFS_APPEND,
-	},
-};
-
-static void __init omap3_evm_init(void)
-{
-	struct omap_board_mux *obm;
-
-	omap3_evm_get_revision();
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
-	obm = (cpu_is_omap3630()) ? omap36x_board_mux : omap35x_board_mux;
-	omap3_mux_init(obm, OMAP_PACKAGE_CBB);
-
-	omap_mux_init_gpio(63, OMAP_PIN_INPUT);
-	omap_hsmmc_init(mmc);
-
-	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
-		omap3evm_twldata.vaux2 = &omap3evm_vaux2;
-
-	omap3_evm_i2c_init();
-
-	omap_display_init(&omap3_evm_dss_data);
-
-	omap_serial_init();
-	omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
-
-	/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
-	usb_nop_xceiv_register();
-
-	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
-		/* enable EHCI VBUS using GPIO22 */
-		omap_mux_init_gpio(OMAP3_EVM_EHCI_VBUS, OMAP_PIN_INPUT_PULLUP);
-		/* Select EHCI port on main board */
-		omap_mux_init_gpio(OMAP3_EVM_EHCI_SELECT,
-				   OMAP_PIN_INPUT_PULLUP);
-		gpio_request_array(omap3_evm_ehci_gpios,
-				   ARRAY_SIZE(omap3_evm_ehci_gpios));
-
-		/* setup EHCI phy reset config */
-		omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
-		phy_data[0].reset_gpio = 21;
-
-		/* EVM REV >= E can supply 500mA with EXTVBUS programming */
-		musb_board_data.power = 500;
-		musb_board_data.extvbus = 1;
-	} else {
-		/* setup EHCI phy reset on MDC */
-		omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
-		phy_data[0].reset_gpio = 135;
-	}
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(&musb_board_data);
-
-	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
-	usbhs_init(&usbhs_bdata);
-	board_nand_init(omap3evm_nand_partitions,
-			ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS,
-			NAND_BUSWIDTH_16, NULL);
-
-	omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
-	omap3evm_init_smsc911x();
-#ifdef CONFIG_BROKEN
-	omap3_evm_display_init();
-#endif
-	omap3_evm_wl12xx_init();
-	omap_twl4030_audio_init("omap3evm", NULL);
-}
-
-MACHINE_START(OMAP3EVM, "OMAP3 EVM")
-	/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap3_evm_init,
-	.init_late	= omap35xx_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index b1547a0..de1bc6b 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -231,34 +231,21 @@ static struct twl4030_keypad_data pandora_kp_data = {
 	.rep		= 1,
 };
 
-static struct panel_tpo_td043_data lcd_data = {
-	.nreset_gpio		= 157,
-};
-
-static struct omap_dss_device pandora_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "tpo_td043mtea1_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 24,
-	.data			= &lcd_data,
-};
-
-static struct omap_dss_device pandora_tv_device = {
-	.name			= "tv",
-	.driver_name		= "venc",
-	.type			= OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+static struct connector_atv_platform_data pandora_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.invert_polarity = false,
 };
 
-static struct omap_dss_device *pandora_dss_devices[] = {
-	&pandora_lcd_device,
-	&pandora_tv_device,
+static struct platform_device pandora_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &pandora_tv_pdata,
 };
 
 static struct omap_dss_board_info pandora_dss_data = {
-	.num_devices	= ARRAY_SIZE(pandora_dss_devices),
-	.devices	= pandora_dss_devices,
-	.default_device	= &pandora_lcd_device,
+	.default_display_name = "lcd",
 };
 
 static void pandora_wl1251_init_card(struct mmc_card *card)
@@ -348,11 +335,11 @@ static struct regulator_consumer_supply pandora_vdds_supplies[] = {
 };
 
 static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = {
-	REGULATOR_SUPPLY("vcc", "display0"),
+	REGULATOR_SUPPLY("vcc", "spi1.1"),
 };
 
 static struct regulator_consumer_supply pandora_usb_phy_supply[] = {
-	REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"),	/* hsusb port 2 */
+	REGULATOR_SUPPLY("vcc", "usb_phy_gen_xceiv.2"),	/* hsusb port 2 */
 };
 
 /* ads7846 on SPI and 2 nub controllers on I2C */
@@ -529,13 +516,21 @@ static int __init omap3pandora_i2c_init(void)
 	return 0;
 }
 
+static struct panel_tpo_td043mtea1_platform_data pandora_lcd_pdata = {
+	.name                   = "lcd",
+	.source                 = "dpi.0",
+
+	.data_lines		= 24,
+	.nreset_gpio		= 157,
+};
+
 static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
 	{
-		.modalias		= "tpo_td043mtea1_panel_spi",
+		.modalias		= "panel-tpo-td043mtea1",
 		.bus_num		= 1,
 		.chip_select		= 1,
 		.max_speed_hz		= 375000,
-		.platform_data		= &pandora_lcd_device,
+		.platform_data		= &pandora_lcd_pdata,
 	}
 };
 
@@ -580,6 +575,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
 	&pandora_keys_gpio,
 	&pandora_vwlan_device,
 	&pandora_backlight,
+	&pandora_tv_connector_device,
 };
 
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index d37e6b1..ba8342f 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -93,40 +93,50 @@ static void __init omap3_stalker_display_init(void)
 {
 	return;
 }
+static struct connector_dvi_platform_data omap3stalker_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = -1,
+};
 
-static struct omap_dss_device omap3_stalker_tv_device = {
-	.name			= "tv",
-	.driver_name		= "venc",
-	.type			= OMAP_DISPLAY_TYPE_VENC,
-#if defined(CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO)
-	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
-#elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE)
-	.u.venc.type		= OMAP_DSS_VENC_TYPE_COMPOSITE,
-#endif
+static struct platform_device omap3stalker_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &omap3stalker_dvi_connector_pdata,
 };
 
-static struct tfp410_platform_data dvi_panel = {
-	.power_down_gpio	= DSS_ENABLE_GPIO,
-	.i2c_bus_num		= -1,
+static struct encoder_tfp410_platform_data omap3stalker_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = DSS_ENABLE_GPIO,
 };
 
-static struct omap_dss_device omap3_stalker_dvi_device = {
-	.name			= "dvi",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "tfp410",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
+static struct platform_device omap3stalker_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &omap3stalker_tfp410_pdata,
+};
+
+static struct connector_atv_platform_data omap3stalker_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+#if defined(CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO)
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+#elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE)
+	.connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE,
+#endif
+	.invert_polarity = false,
 };
 
-static struct omap_dss_device *omap3_stalker_dss_devices[] = {
-	&omap3_stalker_tv_device,
-	&omap3_stalker_dvi_device,
+static struct platform_device omap3stalker_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &omap3stalker_tv_pdata,
 };
 
 static struct omap_dss_board_info omap3_stalker_dss_data = {
-	.num_devices	= ARRAY_SIZE(omap3_stalker_dss_devices),
-	.devices	= omap3_stalker_dss_devices,
-	.default_device	= &omap3_stalker_dvi_device,
+	.default_display_name = "dvi",
 };
 
 static struct regulator_consumer_supply omap3stalker_vmmc1_supply[] = {
@@ -356,6 +366,9 @@ static struct usbhs_phy_data phy_data[] __initdata = {
 
 static struct platform_device *omap3_stalker_devices[] __initdata = {
 	&keys_gpio,
+	&omap3stalker_tfp410_device,
+	&omap3stalker_dvi_connector_device,
+	&omap3stalker_tv_connector_device,
 };
 
 static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 5748b5d..f6d3841 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -72,6 +72,9 @@
 #define OVERO_SMSC911X2_CS     4
 #define OVERO_SMSC911X2_GPIO   65
 
+/* whether to register LCD35 instead of LCD43 */
+static bool overo_use_lcd35;
+
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 
@@ -149,78 +152,94 @@ static inline void __init overo_init_smsc911x(void) { return; }
 #define OVERO_GPIO_LCD_EN 144
 #define OVERO_GPIO_LCD_BL 145
 
-static struct tfp410_platform_data dvi_panel = {
-	.i2c_bus_num		= 3,
-	.power_down_gpio	= -1,
+static struct connector_atv_platform_data overo_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.invert_polarity = false,
 };
 
-static struct omap_dss_device overo_dvi_device = {
-	.name			= "dvi",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "tfp410",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
+static struct platform_device overo_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &overo_tv_pdata,
 };
 
-static struct omap_dss_device overo_tv_device = {
-	.name = "tv",
-	.driver_name = "venc",
-	.type = OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+static const struct display_timing overo_lcd43_videomode = {
+	.pixelclock	= { 0, 9200000, 0 },
+
+	.hactive = { 0, 480, 0 },
+	.hfront_porch = { 0, 8, 0 },
+	.hback_porch = { 0, 4, 0 },
+	.hsync_len = { 0, 41, 0 },
+
+	.vactive = { 0, 272, 0 },
+	.vfront_porch = { 0, 4, 0 },
+	.vback_porch = { 0, 2, 0 },
+	.vsync_len = { 0, 10, 0 },
+
+	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
 };
 
-static struct panel_generic_dpi_data lcd43_panel = {
-	.name			= "samsung_lte430wq_f0c",
-	.num_gpios		= 2,
-	.gpios			= {
-		OVERO_GPIO_LCD_EN,
-		OVERO_GPIO_LCD_BL
-	},
+static struct panel_dpi_platform_data overo_lcd43_pdata = {
+	.name                   = "lcd43",
+	.source                 = "dpi.0",
+
+	.data_lines		= 24,
+
+	.display_timing		= &overo_lcd43_videomode,
+
+	.enable_gpio		= OVERO_GPIO_LCD_EN,
+	.backlight_gpio		= OVERO_GPIO_LCD_BL,
 };
 
-static struct omap_dss_device overo_lcd43_device = {
-	.name			= "lcd43",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "generic_dpi_panel",
-	.data			= &lcd43_panel,
-	.phy.dpi.data_lines	= 24,
+static struct platform_device overo_lcd43_device = {
+	.name                   = "panel-dpi",
+	.id                     = 0,
+	.dev.platform_data      = &overo_lcd43_pdata,
 };
 
-#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
-	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
-static struct panel_generic_dpi_data lcd35_panel = {
-	.num_gpios		= 2,
-	.gpios			= {
-		OVERO_GPIO_LCD_EN,
-		OVERO_GPIO_LCD_BL
-	},
+static struct connector_dvi_platform_data overo_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = 3,
 };
 
-static struct omap_dss_device overo_lcd35_device = {
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.name			= "lcd35",
-	.driver_name		= "lgphilips_lb035q02_panel",
-	.phy.dpi.data_lines	= 24,
-	.data			= &lcd35_panel,
+static struct platform_device overo_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &overo_dvi_connector_pdata,
 };
-#endif
 
-static struct omap_dss_device *overo_dss_devices[] = {
-	&overo_dvi_device,
-	&overo_tv_device,
-#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
-	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
-	&overo_lcd35_device,
-#endif
-	&overo_lcd43_device,
+static struct encoder_tfp410_platform_data overo_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = -1,
+};
+
+static struct platform_device overo_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &overo_tfp410_pdata,
 };
 
 static struct omap_dss_board_info overo_dss_data = {
-	.num_devices	= ARRAY_SIZE(overo_dss_devices),
-	.devices	= overo_dss_devices,
-	.default_device	= &overo_dvi_device,
+	.default_display_name = "lcd43",
 };
 
+static void __init overo_display_init(void)
+{
+	omap_display_init(&overo_dss_data);
+
+	if (!overo_use_lcd35)
+		platform_device_register(&overo_lcd43_device);
+	platform_device_register(&overo_tfp410_device);
+	platform_device_register(&overo_dvi_connector_device);
+	platform_device_register(&overo_tv_connector_device);
+}
+
 static struct mtd_partition overo_nand_partitions[] = {
 	{
 		.name           = "xloader",
@@ -408,24 +427,41 @@ static int __init overo_i2c_init(void)
 	return 0;
 }
 
+static struct panel_lb035q02_platform_data overo_lcd35_pdata = {
+	.name                   = "lcd35",
+	.source                 = "dpi.0",
+
+	.data_lines		= 24,
+
+	.enable_gpio		= OVERO_GPIO_LCD_EN,
+	.backlight_gpio		= OVERO_GPIO_LCD_BL,
+};
+
+/*
+ * NOTE: We need to add either the lgphilips panel, or the lcd43 panel. The
+ * selection is done based on the overo_use_lcd35 field. If new SPI
+ * devices are added here, extra work is needed to make only the lgphilips panel
+ * affected by the overo_use_lcd35 field.
+ */
 static struct spi_board_info overo_spi_board_info[] __initdata = {
-#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
-	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
 	{
-		.modalias		= "lgphilips_lb035q02_panel-spi",
+		.modalias		= "panel_lgphilips_lb035q02",
 		.bus_num		= 1,
 		.chip_select		= 1,
 		.max_speed_hz		= 500000,
 		.mode			= SPI_MODE_3,
+		.platform_data		= &overo_lcd35_pdata,
 	},
-#endif
 };
 
 static int __init overo_spi_init(void)
 {
 	overo_ads7846_init();
-	spi_register_board_info(overo_spi_board_info,
-			ARRAY_SIZE(overo_spi_board_info));
+
+	if (overo_use_lcd35) {
+		spi_register_board_info(overo_spi_board_info,
+				ARRAY_SIZE(overo_spi_board_info));
+	}
 	return 0;
 }
 
@@ -463,11 +499,13 @@ static void __init overo_init(void)
 {
 	int ret;
 
+	if (strstr(boot_command_line, "omapdss.def_disp=lcd35"))
+		overo_use_lcd35 = true;
+
 	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	overo_i2c_init();
 	omap_hsmmc_init(mmc);
-	omap_display_init(&overo_dss_data);
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
@@ -484,6 +522,8 @@ static void __init overo_init(void)
 	overo_init_keys();
 	omap_twl4030_audio_init("overo", NULL);
 
+	overo_display_init();
+
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
deleted file mode 100644
index 345e8c4..0000000
--- a/arch/arm/mach-omap2/board-rm680.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * Board support file for Nokia N950 (RM-680) / N9 (RM-696).
- *
- * Copyright (C) 2010 Nokia
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/i2c/twl.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-#include <linux/platform_data/mtd-onenand-omap2.h>
-#include <linux/usb/phy.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include "common.h"
-#include "mux.h"
-#include "gpmc.h"
-#include "mmc.h"
-#include "hsmmc.h"
-#include "sdram-nokia.h"
-#include "common-board-devices.h"
-#include "gpmc-onenand.h"
-
-static struct regulator_consumer_supply rm680_vemmc_consumers[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-/* Fixed regulator for internal eMMC */
-static struct regulator_init_data rm680_vemmc = {
-	.constraints =	{
-		.name			= "rm680_vemmc",
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS
-					| REGULATOR_CHANGE_MODE,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(rm680_vemmc_consumers),
-	.consumer_supplies		= rm680_vemmc_consumers,
-};
-
-static struct fixed_voltage_config rm680_vemmc_config = {
-	.supply_name		= "VEMMC",
-	.microvolts		= 2900000,
-	.gpio			= 157,
-	.startup_delay		= 150,
-	.enable_high		= 1,
-	.init_data		= &rm680_vemmc,
-};
-
-static struct platform_device rm680_vemmc_device = {
-	.name			= "reg-fixed-voltage",
-	.dev			= {
-		.platform_data	= &rm680_vemmc_config,
-	},
-};
-
-static struct platform_device *rm680_peripherals_devices[] __initdata = {
-	&rm680_vemmc_device,
-};
-
-/* TWL */
-static struct twl4030_gpio_platform_data rm680_gpio_data = {
-	.pullups		= BIT(0),
-	.pulldowns		= BIT(1) | BIT(2) | BIT(8) | BIT(15),
-};
-
-static struct twl4030_platform_data rm680_twl_data = {
-	.gpio			= &rm680_gpio_data,
-	/* add rest of the children here */
-};
-
-static void __init rm680_i2c_init(void)
-{
-	omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0);
-	omap_pmic_init(1, 2900, "twl5031", 7 + OMAP_INTC_START, &rm680_twl_data);
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, NULL, 0);
-}
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-static struct omap_onenand_platform_data board_onenand_data[] = {
-	{
-		.gpio_irq	= 65,
-		.flags		= ONENAND_SYNC_READWRITE,
-	}
-};
-#endif
-
-/* eMMC */
-static struct omap2_hsmmc_info mmc[] __initdata = {
-	{
-		.name		= "internal",
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{ /* Terminator */ }
-};
-
-static void __init rm680_peripherals_init(void)
-{
-	platform_add_devices(rm680_peripherals_devices,
-				ARRAY_SIZE(rm680_peripherals_devices));
-	rm680_i2c_init();
-	gpmc_onenand_init(board_onenand_data);
-	omap_hsmmc_init(mmc);
-}
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static void __init rm680_init(void)
-{
-	struct omap_sdrc_params *sdrc_params;
-
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_serial_init();
-
-	sdrc_params = nokia_get_sdram_timings();
-	omap_sdrc_init(sdrc_params, sdrc_params);
-
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(NULL);
-	rm680_peripherals_init();
-}
-
-MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3630_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= rm680_init,
-	.init_late	= omap3630_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
-
-MACHINE_START(NOKIA_RM696, "Nokia RM-696 board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3630_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= rm680_init,
-	.init_late	= omap3630_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 9c2dd10..5c0d0e1 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -45,6 +45,8 @@
 #include <linux/platform_data/tsl2563.h>
 #include <linux/lis3lv02d.h>
 
+#include <video/omap-panel-data.h>
+
 #if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE)
 #include <media/ir-rx51.h>
 #endif
@@ -55,6 +57,8 @@
 #include "common-board-devices.h"
 #include "gpmc.h"
 #include "gpmc-onenand.h"
+#include "soc.h"
+#include "omap-secure.h"
 
 #define SYSTEM_REV_B_USES_VAUX3	0x1699
 #define SYSTEM_REV_S_USES_VAUX3 0x8
@@ -165,38 +169,47 @@ static struct lp55xx_led_config rx51_lp5523_led_config[] = {
 		.name		= "lp5523:kb1",
 		.chan_nr	= 0,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:kb2",
 		.chan_nr	= 1,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:kb3",
 		.chan_nr	= 2,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:kb4",
 		.chan_nr	= 3,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:b",
 		.chan_nr	= 4,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:g",
 		.chan_nr	= 5,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:r",
 		.chan_nr	= 6,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:kb5",
 		.chan_nr	= 7,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:kb6",
 		.chan_nr	= 8,
 		.led_current	= 50,
+		.max_current	= 100,
 	}
 };
 
@@ -226,6 +239,15 @@ static struct lp55xx_platform_data rx51_lp5523_platform_data = {
 };
 #endif
 
+#define RX51_LCD_RESET_GPIO	90
+
+static struct panel_acx565akm_platform_data acx_pdata = {
+	.name		= "lcd",
+	.source		= "sdi.0",
+	.reset_gpio	= RX51_LCD_RESET_GPIO,
+	.datapairs	= 2,
+};
+
 static struct omap2_mcspi_device_config wl1251_mcspi_config = {
 	.turbo_mode	= 0,
 };
@@ -254,6 +276,7 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
 		.chip_select		= 2,
 		.max_speed_hz		= 6000000,
 		.controller_data	= &mipid_mcspi_config,
+		.platform_data		= &acx_pdata,
 	},
 	[RX51_SPI_TSC2005] = {
 		.modalias		= "tsc2005",
@@ -1277,6 +1300,22 @@ static void __init rx51_init_twl4030_hwmon(void)
 	platform_device_register(&madc_hwmon);
 }
 
+static struct platform_device omap3_rom_rng_device = {
+	.name		= "omap3-rom-rng",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= rx51_secure_rng_call,
+	},
+};
+
+static void __init rx51_init_omap3_rom_rng(void)
+{
+	if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
+		pr_info("RX-51: Registring OMAP3 HWRNG device\n");
+		platform_device_register(&omap3_rom_rng_device);
+	}
+}
+
 void __init rx51_peripherals_init(void)
 {
 	rx51_i2c_init();
@@ -1297,5 +1336,6 @@ void __init rx51_peripherals_init(void)
 
 	rx51_charger_init();
 	rx51_init_twl4030_hwmon();
+	rx51_init_omap3_rom_rng();
 }
 
diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
index bdd1e3a..43a90c8 100644
--- a/arch/arm/mach-omap2/board-rx51-video.c
+++ b/arch/arm/mach-omap2/board-rx51-video.c
@@ -29,34 +29,21 @@
 
 #if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
 
-static struct panel_acx565akm_data lcd_data = {
-	.reset_gpio	= RX51_LCD_RESET_GPIO,
+static struct connector_atv_platform_data rx51_tv_pdata = {
+	.name = "tv",
+	.source = "venc.0",
+	.connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE,
+	.invert_polarity = false,
 };
 
-static struct omap_dss_device rx51_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "panel-acx565akm",
-	.type			= OMAP_DISPLAY_TYPE_SDI,
-	.phy.sdi.datapairs	= 2,
-	.data			= &lcd_data,
-};
-
-static struct omap_dss_device  rx51_tv_device = {
-	.name			= "tv",
-	.type			= OMAP_DISPLAY_TYPE_VENC,
-	.driver_name		= "venc",
-	.phy.venc.type	        = OMAP_DSS_VENC_TYPE_COMPOSITE,
-};
-
-static struct omap_dss_device *rx51_dss_devices[] = {
-	&rx51_lcd_device,
-	&rx51_tv_device,
+static struct platform_device rx51_tv_connector_device = {
+	.name                   = "connector-analog-tv",
+	.id                     = 0,
+	.dev.platform_data      = &rx51_tv_pdata,
 };
 
 static struct omap_dss_board_info rx51_dss_board_info = {
-	.num_devices	= ARRAY_SIZE(rx51_dss_devices),
-	.devices	= rx51_dss_devices,
-	.default_device	= &rx51_lcd_device,
+	.default_display_name = "lcd",
 };
 
 static int __init rx51_video_init(void)
@@ -71,6 +58,8 @@ static int __init rx51_video_init(void)
 
 	omap_display_init(&rx51_dss_board_info);
 
+	platform_device_register(&rx51_tv_connector_device);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 773510556..db168c9 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -2,6 +2,8 @@
  * Board support file for Nokia N900 (aka RX-51).
  *
  * Copyright (C) 2007, 2008 Nokia
+ * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg>
+ * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -31,7 +33,9 @@
 #include "mux.h"
 #include "gpmc.h"
 #include "pm.h"
+#include "soc.h"
 #include "sdram-nokia.h"
+#include "omap-secure.h"
 
 #define RX51_GPIO_SLEEP_IND 162
 
@@ -103,6 +107,14 @@ static void __init rx51_init(void)
 	usb_musb_init(&musb_board_data);
 	rx51_peripherals_init();
 
+	if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
+#ifdef CONFIG_ARM_ERRATA_430973
+		pr_info("RX-51: Enabling ARM errata 430973 workaround\n");
+		/* set IBE to 1 */
+		rx51_secure_update_aux_cr(BIT(6), 0);
+#endif
+	}
+
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
deleted file mode 100644
index 42e5f23..0000000
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Inc.
- * Mikkel Christensen <mlc@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/serial_8250.h>
-#include <linux/smsc911x.h>
-#include <linux/interrupt.h>
-
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include "gpmc.h"
-#include "gpmc-smsc911x.h"
-
-#include "board-zoom.h"
-
-#include "soc.h"
-#include "common.h"
-
-#define ZOOM_SMSC911X_CS	7
-#define ZOOM_SMSC911X_GPIO	158
-#define ZOOM_QUADUART_CS	3
-#define ZOOM_QUADUART_GPIO	102
-#define ZOOM_QUADUART_RST_GPIO	152
-#define QUART_CLK		1843200
-#define DEBUG_BASE		0x08000000
-#define ZOOM_ETHR_START	DEBUG_BASE
-
-static struct omap_smsc911x_platform_data zoom_smsc911x_cfg = {
-	.cs             = ZOOM_SMSC911X_CS,
-	.gpio_irq       = ZOOM_SMSC911X_GPIO,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT,
-};
-
-static inline void __init zoom_init_smsc911x(void)
-{
-	gpmc_smsc911x_init(&zoom_smsc911x_cfg);
-}
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.mapbase	= ZOOM_UART_BASE,
-		.flags		= UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
-		.irqflags	= IRQF_SHARED | IRQF_TRIGGER_RISING,
-		.iotype		= UPIO_MEM,
-		.regshift	= 1,
-		.uartclk	= QUART_CLK,
-	}, {
-		.flags		= 0
-	}
-};
-
-static struct platform_device zoom_debugboard_serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
-static inline void __init zoom_init_quaduart(void)
-{
-	int quart_cs;
-	unsigned long cs_mem_base;
-	int quart_gpio = 0;
-
-	if (gpio_request_one(ZOOM_QUADUART_RST_GPIO,
-				GPIOF_OUT_INIT_LOW,
-				"TL16CP754C GPIO") < 0) {
-		pr_err("Failed to request GPIO%d for TL16CP754C\n",
-			ZOOM_QUADUART_RST_GPIO);
-		return;
-	}
-
-	quart_cs = ZOOM_QUADUART_CS;
-
-	if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
-		pr_err("Failed to request GPMC mem for Quad UART(TL16CP754C)\n");
-		return;
-	}
-
-	quart_gpio = ZOOM_QUADUART_GPIO;
-
-	if (gpio_request_one(quart_gpio, GPIOF_IN, "TL16CP754C GPIO") < 0)
-		printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n",
-								quart_gpio);
-
-	serial_platform_data[0].irq = gpio_to_irq(102);
-}
-
-static inline int omap_zoom_debugboard_detect(void)
-{
-	int debug_board_detect = 0;
-	int ret = 1;
-
-	debug_board_detect = ZOOM_SMSC911X_GPIO;
-
-	if (gpio_request_one(debug_board_detect, GPIOF_IN,
-			     "Zoom debug board detect") < 0) {
-		pr_err("Failed to request GPIO%d for Zoom debug board detect\n",
-		       debug_board_detect);
-		return 0;
-	}
-
-	if (!gpio_get_value(debug_board_detect)) {
-		ret = 0;
-	}
-	gpio_free(debug_board_detect);
-	return ret;
-}
-
-static struct platform_device *zoom_devices[] __initdata = {
-	&zoom_debugboard_serial_device,
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-int __init zoom_debugboard_init(void)
-{
-	if (!omap_zoom_debugboard_detect())
-		return 0;
-
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-	zoom_init_smsc911x();
-	zoom_init_quaduart();
-	return platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices));
-}
diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c
deleted file mode 100644
index c2a079c..0000000
--- a/arch/arm/mach-omap2/board-zoom-display.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright (C) 2010 Texas Instruments Inc.
- *
- * Modified from mach-omap2/board-zoom-peripherals.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "board-zoom.h"
-#include "soc.h"
-#include "common.h"
-
-#define LCD_PANEL_RESET_GPIO_PROD	96
-#define LCD_PANEL_RESET_GPIO_PILOT	55
-#define LCD_PANEL_QVGA_GPIO		56
-
-static struct panel_nec_nl8048_data zoom_lcd_data = {
-	/* res_gpio filled in code */
-	.qvga_gpio = LCD_PANEL_QVGA_GPIO,
-};
-
-static struct omap_dss_device zoom_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "NEC_8048_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 24,
-	.data			= &zoom_lcd_data,
-};
-
-static struct omap_dss_device *zoom_dss_devices[] = {
-	&zoom_lcd_device,
-};
-
-static struct omap_dss_board_info zoom_dss_data = {
-	.num_devices		= ARRAY_SIZE(zoom_dss_devices),
-	.devices		= zoom_dss_devices,
-	.default_device		= &zoom_lcd_device,
-};
-
-static void __init zoom_lcd_panel_init(void)
-{
-	zoom_lcd_data.res_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
-			LCD_PANEL_RESET_GPIO_PROD :
-			LCD_PANEL_RESET_GPIO_PILOT;
-}
-
-static struct omap2_mcspi_device_config dss_lcd_mcspi_config = {
-	.turbo_mode		= 1,
-};
-
-static struct spi_board_info nec_8048_spi_board_info[] __initdata = {
-	[0] = {
-		.modalias		= "nec_8048_spi",
-		.bus_num		= 1,
-		.chip_select		= 2,
-		.max_speed_hz		= 375000,
-		.controller_data	= &dss_lcd_mcspi_config,
-	},
-};
-
-void __init zoom_display_init(void)
-{
-	omap_display_init(&zoom_dss_data);
-	spi_register_board_info(nec_8048_spi_board_info,
-				ARRAY_SIZE(nec_8048_spi_board_info));
-	zoom_lcd_panel_init();
-}
-
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
deleted file mode 100644
index a90375d..0000000
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ /dev/null
@@ -1,360 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Inc.
- *
- * Modified from mach-omap2/board-zoom2.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/gpio.h>
-#include <linux/i2c/twl.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/wl12xx.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_data/gpio-omap.h>
-#include <linux/platform_data/omap-twl4030.h>
-#include <linux/usb/phy.h>
-#include <linux/pwm.h>
-#include <linux/leds_pwm.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-
-#include "board-zoom.h"
-
-#include "mux.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-
-#define OMAP_ZOOM_WLAN_PMENA_GPIO	(101)
-#define OMAP_ZOOM_TSC2004_IRQ_GPIO	(153)
-#define OMAP_ZOOM_WLAN_IRQ_GPIO		(162)
-
-/* Zoom2 has Qwerty keyboard*/
-static uint32_t board_keymap[] = {
-	KEY(0, 0, KEY_E),
-	KEY(0, 1, KEY_R),
-	KEY(0, 2, KEY_T),
-	KEY(0, 3, KEY_HOME),
-	KEY(0, 6, KEY_I),
-	KEY(0, 7, KEY_LEFTSHIFT),
-	KEY(1, 0, KEY_D),
-	KEY(1, 1, KEY_F),
-	KEY(1, 2, KEY_G),
-	KEY(1, 3, KEY_SEND),
-	KEY(1, 6, KEY_K),
-	KEY(1, 7, KEY_ENTER),
-	KEY(2, 0, KEY_X),
-	KEY(2, 1, KEY_C),
-	KEY(2, 2, KEY_V),
-	KEY(2, 3, KEY_END),
-	KEY(2, 6, KEY_DOT),
-	KEY(2, 7, KEY_CAPSLOCK),
-	KEY(3, 0, KEY_Z),
-	KEY(3, 1, KEY_KPPLUS),
-	KEY(3, 2, KEY_B),
-	KEY(3, 3, KEY_F1),
-	KEY(3, 6, KEY_O),
-	KEY(3, 7, KEY_SPACE),
-	KEY(4, 0, KEY_W),
-	KEY(4, 1, KEY_Y),
-	KEY(4, 2, KEY_U),
-	KEY(4, 3, KEY_F2),
-	KEY(4, 4, KEY_VOLUMEUP),
-	KEY(4, 6, KEY_L),
-	KEY(4, 7, KEY_LEFT),
-	KEY(5, 0, KEY_S),
-	KEY(5, 1, KEY_H),
-	KEY(5, 2, KEY_J),
-	KEY(5, 3, KEY_F3),
-	KEY(5, 4, KEY_UNKNOWN),
-	KEY(5, 5, KEY_VOLUMEDOWN),
-	KEY(5, 6, KEY_M),
-	KEY(5, 7, KEY_RIGHT),
-	KEY(6, 0, KEY_Q),
-	KEY(6, 1, KEY_A),
-	KEY(6, 2, KEY_N),
-	KEY(6, 3, KEY_BACKSPACE),
-	KEY(6, 6, KEY_P),
-	KEY(6, 7, KEY_UP),
-	KEY(7, 0, KEY_PROG1),	/*MACRO 1 <User defined> */
-	KEY(7, 1, KEY_PROG2),	/*MACRO 2 <User defined> */
-	KEY(7, 2, KEY_PROG3),	/*MACRO 3 <User defined> */
-	KEY(7, 3, KEY_PROG4),	/*MACRO 4 <User defined> */
-	KEY(7, 6, KEY_SELECT),
-	KEY(7, 7, KEY_DOWN)
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data zoom_kp_twl4030_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 8,
-	.cols		= 8,
-	.rep		= 1,
-};
-
-static struct regulator_consumer_supply zoom_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply zoom_vsim_supply[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply zoom_vmmc2_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-static struct regulator_consumer_supply zoom_vmmc3_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
-};
-
-/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
-static struct regulator_init_data zoom_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(zoom_vmmc1_supply),
-	.consumer_supplies      = zoom_vmmc1_supply,
-};
-
-/* VMMC2 for MMC2 card */
-static struct regulator_init_data zoom_vmmc2 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 1850000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(zoom_vmmc2_supply),
-	.consumer_supplies      = zoom_vmmc2_supply,
-};
-
-/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
-static struct regulator_init_data zoom_vsim = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 3000000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(zoom_vsim_supply),
-	.consumer_supplies      = zoom_vsim_supply,
-};
-
-static struct regulator_init_data zoom_vmmc3 = {
-	.constraints = {
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(zoom_vmmc3_supply),
-	.consumer_supplies	= zoom_vmmc3_supply,
-};
-
-static struct fixed_voltage_config zoom_vwlan = {
-	.supply_name		= "vwl1271",
-	.microvolts		= 1800000, /* 1.8V */
-	.gpio			= OMAP_ZOOM_WLAN_PMENA_GPIO,
-	.startup_delay		= 70000, /* 70msec */
-	.enable_high		= 1,
-	.enabled_at_boot	= 0,
-	.init_data		= &zoom_vmmc3,
-};
-
-static struct platform_device omap_vwlan_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &zoom_vwlan,
-	},
-};
-
-static struct pwm_lookup zoom_pwm_lookup[] = {
-	PWM_LOOKUP("twl-pwm", 0, "leds_pwm", "zoom::keypad"),
-	PWM_LOOKUP("twl-pwm", 1, "pwm-backlight", "backlight"),
-};
-
-static struct led_pwm zoom_pwm_leds[] = {
-	{
-		.name		= "zoom::keypad",
-		.max_brightness	= 127,
-		.pwm_period_ns	= 7812500,
-	},
-};
-
-static struct led_pwm_platform_data zoom_pwm_data = {
-	.num_leds	= ARRAY_SIZE(zoom_pwm_leds),
-	.leds		= zoom_pwm_leds,
-};
-
-static struct platform_device zoom_leds_pwm = {
-	.name	= "leds_pwm",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &zoom_pwm_data,
-	},
-};
-
-static struct platform_pwm_backlight_data zoom_backlight_data = {
-	.pwm_id = 1,
-	.max_brightness = 127,
-	.dft_brightness = 127,
-	.pwm_period_ns = 7812500,
-};
-
-static struct platform_device zoom_backlight_pwm = {
-	.name   = "pwm-backlight",
-	.id     = -1,
-	.dev    = {
-		.platform_data = &zoom_backlight_data,
-	},
-};
-
-static struct platform_device *zoom_devices[] __initdata = {
-	&omap_vwlan_device,
-	&zoom_leds_pwm,
-	&zoom_backlight_pwm,
-};
-
-static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
-	.board_ref_clock = WL12XX_REFCLOCK_26, /* 26 MHz */
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.name		= "external",
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_wp	= -EINVAL,
-		.power_saving	= true,
-		.deferred	= true,
-	},
-	{
-		.name		= "internal",
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.nonremovable	= true,
-		.power_saving	= true,
-	},
-	{
-		.name		= "wl1271",
-		.mmc		= 3,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
-		.gpio_wp	= -EINVAL,
-		.gpio_cd	= -EINVAL,
-		.nonremovable	= true,
-	},
-	{}      /* Terminator */
-};
-
-static struct omap_tw4030_pdata omap_twl4030_audio_data = {
-	.voice_connected = true,
-	.custom_routing	= true,
-
-	.has_hs		= OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
-	.has_hf		= OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
-
-	.has_mainmic	= true,
-	.has_submic	= true,
-	.has_hsmic	= true,
-	.has_linein	= OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
-};
-
-static int zoom_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	mmc[0].gpio_cd = gpio + 0;
-	omap_hsmmc_late_init(mmc);
-
-	/* Audio setup */
-	omap_twl4030_audio_data.jack_detect = gpio + 2;
-	omap_twl4030_audio_init("Zoom2", &omap_twl4030_audio_data);
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data zoom_gpio_data = {
-	.setup		= zoom_twl_gpio_setup,
-};
-
-static struct twl4030_platform_data zoom_twldata = {
-	/* platform_data for children goes here */
-	.gpio		= &zoom_gpio_data,
-	.keypad		= &zoom_kp_twl4030_data,
-	.vmmc1          = &zoom_vmmc1,
-	.vmmc2          = &zoom_vmmc2,
-	.vsim           = &zoom_vsim,
-};
-
-static int __init omap_i2c_init(void)
-{
-	omap3_pmic_get_config(&zoom_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
-			TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
-			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-
-	if (machine_is_omap_zoom2())
-		zoom_twldata.audio->codec->ramp_delay_value = 3; /* 161 ms */
-
-	omap_pmic_init(1, 2400, "twl5030", 7 + OMAP_INTC_START, &zoom_twldata);
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	return 0;
-}
-
-static void enable_board_wakeup_source(void)
-{
-	/* T2 interrupt line (keypad) */
-	omap_mux_init_signal("sys_nirq",
-		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
-}
-
-void __init zoom_peripherals_init(void)
-{
-	int ret;
-
-	omap_zoom_wlan_data.irq = gpio_to_irq(OMAP_ZOOM_WLAN_IRQ_GPIO);
-	ret = wl12xx_set_platform_data(&omap_zoom_wlan_data);
-
-	if (ret)
-		pr_err("error setting wl12xx data: %d\n", ret);
-
-	omap_hsmmc_init(mmc);
-	omap_i2c_init();
-	pwm_add_table(zoom_pwm_lookup, ARRAY_SIZE(zoom_pwm_lookup));
-	platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices));
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(NULL);
-	enable_board_wakeup_source();
-	omap_serial_init();
-}
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
deleted file mode 100644
index 1a3dd86..0000000
--- a/arch/arm/mach-omap2/board-zoom.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Texas Instruments Inc.
- * Mikkel Christensen <mlc@ti.com>
- * Felipe Balbi <balbi@ti.com>
- *
- * Modified from mach-omap2/board-ldp.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/i2c/twl.h>
-#include <linux/mtd/nand.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-
-#include "board-zoom.h"
-
-#include "board-flash.h"
-#include "mux.h"
-#include "sdram-micron-mt46h32m32lf-6.h"
-#include "sdram-hynix-h8mbx00u0mer-0em.h"
-
-#define ZOOM3_EHCI_RESET_GPIO		64
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	/* WLAN IRQ - GPIO 162 */
-	OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-	/* WLAN POWER ENABLE - GPIO 101 */
-	OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	/* WLAN SDIO: MMC3 CMD */
-	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP),
-	/* WLAN SDIO: MMC3 CLK */
-	OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	/* WLAN SDIO: MMC3 DAT[0-3] */
-	OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static struct mtd_partition zoom_nand_partitions[] = {
-	/* All the partition sizes are listed in terms of NAND block size */
-	{
-		.name		= "X-Loader-NAND",
-		.offset		= 0,
-		.size		= 4 * (64 * 2048),	/* 512KB, 0x80000 */
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "U-Boot-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size		= 10 * (64 * 2048),	/* 1.25MB, 0x140000 */
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "Boot Env-NAND",
-		.offset		= MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
-		.size		= 2 * (64 * 2048),	/* 256KB, 0x40000 */
-	},
-	{
-		.name		= "Kernel-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x0200000*/
-		.size		= 240 * (64 * 2048),	/* 30M, 0x1E00000 */
-	},
-	{
-		.name		= "system",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x2000000 */
-		.size		= 3328 * (64 * 2048),	/* 416M, 0x1A000000 */
-	},
-	{
-		.name		= "userdata",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1C000000*/
-		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
-	},
-	{
-		.name		= "cache",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1E000000*/
-		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
-	},
-};
-
-static struct usbhs_phy_data phy_data[] __initdata = {
-	{
-		.port = 2,
-		.reset_gpio = ZOOM3_EHCI_RESET_GPIO,
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-	.port_mode[1]		= OMAP_EHCI_PORT_MODE_PHY,
-};
-
-static void __init omap_zoom_init(void)
-{
-	if (machine_is_omap_zoom2()) {
-		omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	} else if (machine_is_omap_zoom3()) {
-		omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
-		omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT);
-
-		usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
-		usbhs_init(&usbhs_bdata);
-	}
-
-	board_nand_init(zoom_nand_partitions,
-			ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS,
-			NAND_BUSWIDTH_16, nand_default_timings);
-	zoom_debugboard_init();
-	zoom_peripherals_init();
-
-	if (machine_is_omap_zoom2())
-		omap_sdrc_init(mt46h32m32lf6_sdrc_params,
-					  mt46h32m32lf6_sdrc_params);
-	else if (machine_is_omap_zoom3())
-		omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
-					  h8mbx00u0mer0em_sdrc_params);
-
-	zoom_display_init();
-}
-
-MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3430_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap_zoom_init,
-	.init_late	= omap3430_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
-
-MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3630_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap_zoom_init,
-	.init_late	= omap3630_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/board-zoom.h b/arch/arm/mach-omap2/board-zoom.h
deleted file mode 100644
index 2e94869..0000000
--- a/arch/arm/mach-omap2/board-zoom.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * Defines for zoom boards
- */
-#include <video/omapdss.h>
-
-#define ZOOM_NAND_CS    0
-
-extern int __init zoom_debugboard_init(void);
-extern void __init zoom_peripherals_init(void);
-extern void __init zoom_display_init(void);
diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c
index ba6534d..865d30e 100644
--- a/arch/arm/mach-omap2/cclock33xx_data.c
+++ b/arch/arm/mach-omap2/cclock33xx_data.c
@@ -421,6 +421,10 @@ static struct clk aes0_fck;
 DEFINE_STRUCT_CLK_HW_OMAP(aes0_fck, NULL);
 DEFINE_STRUCT_CLK(aes0_fck, dpll_core_ck_parents, clk_ops_null);
 
+static struct clk rng_fck;
+DEFINE_STRUCT_CLK_HW_OMAP(rng_fck, NULL);
+DEFINE_STRUCT_CLK(rng_fck, dpll_core_ck_parents, clk_ops_null);
+
 /*
  * Modules clock nodes
  *
@@ -966,6 +970,7 @@ static struct omap_clk am33xx_clks[] = {
 	CLK(NULL,	"smartreflex1_fck",	&smartreflex1_fck),
 	CLK(NULL,	"sha0_fck",		&sha0_fck),
 	CLK(NULL,	"aes0_fck",		&aes0_fck),
+	CLK(NULL,	"rng_fck",		&rng_fck),
 	CLK(NULL,	"timer1_fck",		&timer1_fck),
 	CLK(NULL,	"timer2_fck",		&timer2_fck),
 	CLK(NULL,	"timer3_fck",		&timer3_fck),
diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c
index 334b767..03a2829 100644
--- a/arch/arm/mach-omap2/cclock3xxx_data.c
+++ b/arch/arm/mach-omap2/cclock3xxx_data.c
@@ -3275,6 +3275,7 @@ static struct omap_clk omap36xx_clks[] = {
 static struct omap_clk omap34xx_omap36xx_clks[] = {
 	CLK(NULL,	"aes1_ick",	&aes1_ick),
 	CLK("omap_rng",	"ick",		&rng_ick),
+	CLK("omap3-rom-rng",	"ick",	&rng_ick),
 	CLK(NULL,	"sha11_ick",	&sha11_ick),
 	CLK(NULL,	"des1_ick",	&des1_ick),
 	CLK(NULL,	"cam_mclk",	&cam_mclk),
diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c
index 88e37a47..b237950 100644
--- a/arch/arm/mach-omap2/cclock44xx_data.c
+++ b/arch/arm/mach-omap2/cclock44xx_data.c
@@ -1632,7 +1632,7 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"auxclk5_src_ck",		&auxclk5_src_ck),
 	CLK(NULL,	"auxclk5_ck",			&auxclk5_ck),
 	CLK(NULL,	"auxclkreq5_ck",		&auxclkreq5_ck),
-	CLK("omap-gpmc",	"fck",			&dummy_ck),
+	CLK("50000000.gpmc",	"fck",			&dummy_ck),
 	CLK("omap_i2c.1",	"ick",			&dummy_ck),
 	CLK("omap_i2c.2",	"ick",			&dummy_ck),
 	CLK("omap_i2c.3",	"ick",			&dummy_ck),
@@ -1707,6 +1707,18 @@ int __init omap4xxx_clk_init(void)
 	omap2_clk_disable_autoidle_all();
 
 	/*
+	 * A set rate of ABE DPLL inturn triggers a set rate of USB DPLL
+	 * when its in bypass. So always lock USB before ABE DPLL.
+	 */
+	/*
+	 * Lock USB DPLL on OMAP4 devices so that the L3INIT power
+	 * domain can transition to retention state when not in use.
+	 */
+	rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure USB DPLL!\n", __func__);
+
+	/*
 	 * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
 	 * state when turning the ABE clock domain. Workaround this by
 	 * locking the ABE DPLL on boot.
@@ -1718,13 +1730,5 @@ int __init omap4xxx_clk_init(void)
 	if (rc)
 		pr_err("%s: failed to configure ABE DPLL!\n", __func__);
 
-	/*
-	 * Lock USB DPLL on OMAP4 devices so that the L3INIT power
-	 * domain can transition to retention state when not in use.
-	 */
-	rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ);
-	if (rc)
-		pr_err("%s: failed to configure USB DPLL!\n", __func__);
-
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/clkt2xxx_apll.c b/arch/arm/mach-omap2/clkt2xxx_apll.c
index 25b1fee..c78e893 100644
--- a/arch/arm/mach-omap2/clkt2xxx_apll.c
+++ b/arch/arm/mach-omap2/clkt2xxx_apll.c
@@ -52,7 +52,7 @@ static bool omap2xxx_clk_apll_locked(struct clk_hw *hw)
 
 	apll_mask = EN_APLL_LOCKED << clk->enable_bit;
 
-	r = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+	r = omap2xxx_cm_get_pll_status();
 
 	return ((r & apll_mask) == apll_mask) ? true : false;
 }
@@ -126,7 +126,7 @@ u32 omap2xxx_get_apll_clkin(void)
 {
 	u32 aplls, srate = 0;
 
-	aplls = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
+	aplls = omap2xxx_cm_get_pll_config();
 	aplls &= OMAP24XX_APLLS_CLKIN_MASK;
 	aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;
 
diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
index d862010..3ff3254 100644
--- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
+++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
@@ -60,8 +60,7 @@ unsigned long omap2xxx_clk_get_core_rate(void)
 
 	core_clk = omap2_get_dpll_rate(dpll_core_ck);
 
-	v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-	v &= OMAP24XX_CORE_CLK_SRC_MASK;
+	v = omap2xxx_cm_get_core_clk_src();
 
 	if (v == CORE_CLK_SRC_32K)
 		core_clk = 32768;
@@ -79,8 +78,7 @@ static long omap2_dpllcore_round_rate(unsigned long target_rate)
 {
 	u32 high, low, core_clk_src;
 
-	core_clk_src = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-	core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK;
+	core_clk_src = omap2xxx_cm_get_core_clk_src();
 
 	if (core_clk_src == CORE_CLK_SRC_DPLL) {	/* DPLL clockout */
 		high = curr_prcm_set->dpll_speed * 2;
@@ -120,8 +118,7 @@ int omap2_reprogram_dpllcore(struct clk_hw *hw, unsigned long rate,
 	const struct dpll_data *dd;
 
 	cur_rate = omap2xxx_clk_get_core_rate();
-	mult = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-	mult &= OMAP24XX_CORE_CLK_SRC_MASK;
+	mult = omap2xxx_cm_get_core_clk_src();
 
 	if ((rate == (cur_rate / 2)) && (mult == 2)) {
 		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
@@ -145,7 +142,7 @@ int omap2_reprogram_dpllcore(struct clk_hw *hw, unsigned long rate,
 		tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
 					   dd->div1_mask);
 		div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
-		tmpset.cm_clksel2_pll = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+		tmpset.cm_clksel2_pll = omap2xxx_cm_get_core_pll_config();
 		tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
 		if (rate > low) {
 			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index ae2b35e..b935ed2 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -98,7 +98,7 @@ long omap2_round_to_table_rate(struct clk_hw *hw, unsigned long rate,
 int omap2_select_table_rate(struct clk_hw *hw, unsigned long rate,
 			    unsigned long parent_rate)
 {
-	u32 cur_rate, done_rate, bypass = 0, tmp;
+	u32 cur_rate, done_rate, bypass = 0;
 	const struct prcm_config *prcm;
 	unsigned long found_speed = 0;
 	unsigned long flags;
@@ -141,23 +141,11 @@ int omap2_select_table_rate(struct clk_hw *hw, unsigned long rate,
 		else
 			done_rate = CORE_CLK_SRC_DPLL;
 
-		/* MPU divider */
-		omap2_cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL);
-
-		/* dsp + iva1 div(2420), iva2.1(2430) */
-		omap2_cm_write_mod_reg(prcm->cm_clksel_dsp,
-				 OMAP24XX_DSP_MOD, CM_CLKSEL);
-
-		omap2_cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL);
-
-		/* Major subsystem dividers */
-		tmp = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
-		omap2_cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD,
-				 CM_CLKSEL1);
-
-		if (cpu_is_omap2430())
-			omap2_cm_write_mod_reg(prcm->cm_clksel_mdm,
-					 OMAP2430_MDM_MOD, CM_CLKSEL);
+		omap2xxx_cm_set_mod_dividers(prcm->cm_clksel_mpu,
+					     prcm->cm_clksel_dsp,
+					     prcm->cm_clksel_gfx,
+					     prcm->cm_clksel1_core,
+					     prcm->cm_clksel_mdm);
 
 		/* x2 to enter omap2xxx_sdrc_init_params() */
 		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 0c38ca9..c7c5d31 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -543,6 +543,44 @@ int omap2_clk_disable_autoidle_all(void)
 }
 
 /**
+ * omap2_clk_deny_idle - disable autoidle on an OMAP clock
+ * @clk: struct clk * to disable autoidle for
+ *
+ * Disable autoidle on an OMAP clock.
+ */
+int omap2_clk_deny_idle(struct clk *clk)
+{
+	struct clk_hw_omap *c;
+
+	if (__clk_get_flags(clk) & CLK_IS_BASIC)
+		return -EINVAL;
+
+	c = to_clk_hw_omap(__clk_get_hw(clk));
+	if (c->ops && c->ops->deny_idle)
+		c->ops->deny_idle(c);
+	return 0;
+}
+
+/**
+ * omap2_clk_allow_idle - enable autoidle on an OMAP clock
+ * @clk: struct clk * to enable autoidle for
+ *
+ * Enable autoidle on an OMAP clock.
+ */
+int omap2_clk_allow_idle(struct clk *clk)
+{
+	struct clk_hw_omap *c;
+
+	if (__clk_get_flags(clk) & CLK_IS_BASIC)
+		return -EINVAL;
+
+	c = to_clk_hw_omap(__clk_get_hw(clk));
+	if (c->ops && c->ops->allow_idle)
+		c->ops->allow_idle(c);
+	return 0;
+}
+
+/**
  * omap2_clk_enable_init_clocks - prepare & enable a list of clocks
  * @clk_names: ptr to an array of strings of clock names to enable
  * @num_clocks: number of clock names in @clk_names
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 7aa32cd..82916cc 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -411,6 +411,8 @@ void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
 void omap2_init_clk_hw_omap_clocks(struct clk *clk);
 int omap2_clk_enable_autoidle_all(void);
 int omap2_clk_disable_autoidle_all(void);
+int omap2_clk_allow_idle(struct clk *clk);
+int omap2_clk_deny_idle(struct clk *clk);
 void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
 int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name);
 void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index daeecf1..f17f006 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -132,7 +132,7 @@ struct clockdomain {
 	u8 _flags;
 	const u8 dep_bit;
 	const u8 prcm_partition;
-	const s16 cm_inst;
+	const u16 cm_inst;
 	const u16 clkdm_offs;
 	struct clkdm_dep *wkdep_srcs;
 	struct clkdm_dep *sleepdep_srcs;
@@ -217,6 +217,8 @@ extern void __init omap3xxx_clockdomains_init(void);
 extern void __init am33xx_clockdomains_init(void);
 extern void __init omap44xx_clockdomains_init(void);
 extern void __init omap54xx_clockdomains_init(void);
+extern void __init dra7xx_clockdomains_init(void);
+void am43xx_clockdomains_init(void);
 
 extern void clkdm_add_autodeps(struct clockdomain *clkdm);
 extern void clkdm_del_autodeps(struct clockdomain *clkdm);
@@ -225,6 +227,7 @@ extern struct clkdm_ops omap2_clkdm_operations;
 extern struct clkdm_ops omap3_clkdm_operations;
 extern struct clkdm_ops omap4_clkdm_operations;
 extern struct clkdm_ops am33xx_clkdm_operations;
+extern struct clkdm_ops am43xx_clkdm_operations;
 
 extern struct clkdm_dep gfx_24xx_wkdeps[];
 extern struct clkdm_dep dsp_24xx_wkdeps[];
diff --git a/arch/arm/mach-omap2/clockdomains43xx_data.c b/arch/arm/mach-omap2/clockdomains43xx_data.c
new file mode 100644
index 0000000..6d71c60
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains43xx_data.c
@@ -0,0 +1,196 @@
+/*
+ * AM43xx Clock domains framework
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "prcm44xx.h"
+#include "prcm43xx.h"
+
+static struct clockdomain l4_cefuse_43xx_clkdm = {
+	.name		  = "l4_cefuse_clkdm",
+	.pwrdm		  = { .name = "cefuse_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_CEFUSE_INST,
+	.clkdm_offs	  = AM43XX_CM_CEFUSE_CEFUSE_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain mpu_43xx_clkdm = {
+	.name		  = "mpu_clkdm",
+	.pwrdm		  = { .name = "mpu_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_MPU_INST,
+	.clkdm_offs	  = AM43XX_CM_MPU_MPU_CDOFFS,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain l4ls_43xx_clkdm = {
+	.name		  = "l4ls_clkdm",
+	.pwrdm		  = { .name = "per_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_PER_INST,
+	.clkdm_offs	  = AM43XX_CM_PER_L4LS_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain tamper_43xx_clkdm = {
+	.name		  = "tamper_clkdm",
+	.pwrdm		  = { .name = "tamper_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_TAMPER_INST,
+	.clkdm_offs	  = AM43XX_CM_TAMPER_TAMPER_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4_rtc_43xx_clkdm = {
+	.name		  = "l4_rtc_clkdm",
+	.pwrdm		  = { .name = "rtc_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_RTC_INST,
+	.clkdm_offs	  = AM43XX_CM_RTC_RTC_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain pruss_ocp_43xx_clkdm = {
+	.name		  = "pruss_ocp_clkdm",
+	.pwrdm		  = { .name = "per_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_PER_INST,
+	.clkdm_offs	  = AM43XX_CM_PER_ICSS_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain ocpwp_l3_43xx_clkdm = {
+	.name		  = "ocpwp_l3_clkdm",
+	.pwrdm		  = { .name = "per_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_PER_INST,
+	.clkdm_offs	  = AM43XX_CM_PER_OCPWP_L3_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l3s_tsc_43xx_clkdm = {
+	.name		  = "l3s_tsc_clkdm",
+	.pwrdm		  = { .name = "wkup_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_WKUP_INST,
+	.clkdm_offs	  = AM43XX_CM_WKUP_L3S_TSC_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain dss_43xx_clkdm = {
+	.name		  = "dss_clkdm",
+	.pwrdm		  = { .name = "per_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_PER_INST,
+	.clkdm_offs	  = AM43XX_CM_PER_DSS_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l3_aon_43xx_clkdm = {
+	.name		  = "l3_aon_clkdm",
+	.pwrdm		  = { .name = "wkup_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_WKUP_INST,
+	.clkdm_offs	  = AM43XX_CM_WKUP_L3_AON_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain emif_43xx_clkdm = {
+	.name		  = "emif_clkdm",
+	.pwrdm		  = { .name = "per_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_PER_INST,
+	.clkdm_offs	  = AM43XX_CM_PER_EMIF_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4_wkup_aon_43xx_clkdm = {
+	.name		  = "l4_wkup_aon_clkdm",
+	.pwrdm		  = { .name = "wkup_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_WKUP_INST,
+	.clkdm_offs	  = AM43XX_CM_WKUP_L4_WKUP_AON_CDOFFS,
+};
+
+static struct clockdomain l3_43xx_clkdm = {
+	.name		  = "l3_clkdm",
+	.pwrdm		  = { .name = "per_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_PER_INST,
+	.clkdm_offs	  = AM43XX_CM_PER_L3_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l4_wkup_43xx_clkdm = {
+	.name		  = "l4_wkup_clkdm",
+	.pwrdm		  = { .name = "wkup_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_WKUP_INST,
+	.clkdm_offs	  = AM43XX_CM_WKUP_WKUP_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain cpsw_125mhz_43xx_clkdm = {
+	.name		  = "cpsw_125mhz_clkdm",
+	.pwrdm		  = { .name = "per_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_PER_INST,
+	.clkdm_offs	  = AM43XX_CM_PER_CPSW_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain gfx_l3_43xx_clkdm = {
+	.name		  = "gfx_l3_clkdm",
+	.pwrdm		  = { .name = "gfx_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_GFX_INST,
+	.clkdm_offs	  = AM43XX_CM_GFX_GFX_L3_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain l3s_43xx_clkdm = {
+	.name		  = "l3s_clkdm",
+	.pwrdm		  = { .name = "per_pwrdm" },
+	.prcm_partition	  = AM43XX_CM_PARTITION,
+	.cm_inst	  = AM43XX_CM_PER_INST,
+	.clkdm_offs	  = AM43XX_CM_PER_L3S_CDOFFS,
+	.flags		  = CLKDM_CAN_SWSUP,
+};
+
+static struct clockdomain *clockdomains_am43xx[] __initdata = {
+	&l4_cefuse_43xx_clkdm,
+	&mpu_43xx_clkdm,
+	&l4ls_43xx_clkdm,
+	&tamper_43xx_clkdm,
+	&l4_rtc_43xx_clkdm,
+	&pruss_ocp_43xx_clkdm,
+	&ocpwp_l3_43xx_clkdm,
+	&l3s_tsc_43xx_clkdm,
+	&dss_43xx_clkdm,
+	&l3_aon_43xx_clkdm,
+	&emif_43xx_clkdm,
+	&l4_wkup_aon_43xx_clkdm,
+	&l3_43xx_clkdm,
+	&l4_wkup_43xx_clkdm,
+	&cpsw_125mhz_43xx_clkdm,
+	&gfx_l3_43xx_clkdm,
+	&l3s_43xx_clkdm,
+	NULL
+};
+
+void __init am43xx_clockdomains_init(void)
+{
+	clkdm_register_platform_funcs(&am43xx_clkdm_operations);
+	clkdm_register_clkdms(clockdomains_am43xx);
+	clkdm_complete_init();
+}
diff --git a/arch/arm/mach-omap2/clockdomains7xx_data.c b/arch/arm/mach-omap2/clockdomains7xx_data.c
new file mode 100644
index 0000000..57d5df0
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains7xx_data.c
@@ -0,0 +1,740 @@
+/*
+ * DRA7xx Clock domains framework
+ *
+ * Copyright (C) 2009-2013 Texas Instruments, Inc.
+ * Copyright (C) 2009-2011 Nokia Corporation
+ *
+ * Generated by code originally written by:
+ * Abhijit Pagare (abhijitpagare@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ * Paul Walmsley (paul@pwsan.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "cm1_7xx.h"
+#include "cm2_7xx.h"
+
+#include "cm-regbits-7xx.h"
+#include "prm7xx.h"
+#include "prcm44xx.h"
+#include "prcm_mpu7xx.h"
+
+/* Static Dependencies for DRA7xx Clock Domains */
+
+static struct clkdm_dep cam_wkup_sleep_deps[] = {
+	{ .clkdm_name = "emif_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep dma_wkup_sleep_deps[] = {
+	{ .clkdm_name = "dss_clkdm" },
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "ipu_clkdm" },
+	{ .clkdm_name = "ipu1_clkdm" },
+	{ .clkdm_name = "ipu2_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ .clkdm_name = "l3init_clkdm" },
+	{ .clkdm_name = "l4cfg_clkdm" },
+	{ .clkdm_name = "l4per_clkdm" },
+	{ .clkdm_name = "l4per2_clkdm" },
+	{ .clkdm_name = "l4per3_clkdm" },
+	{ .clkdm_name = "l4sec_clkdm" },
+	{ .clkdm_name = "pcie_clkdm" },
+	{ .clkdm_name = "wkupaon_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep dsp1_wkup_sleep_deps[] = {
+	{ .clkdm_name = "atl_clkdm" },
+	{ .clkdm_name = "cam_clkdm" },
+	{ .clkdm_name = "dsp2_clkdm" },
+	{ .clkdm_name = "dss_clkdm" },
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "eve1_clkdm" },
+	{ .clkdm_name = "eve2_clkdm" },
+	{ .clkdm_name = "eve3_clkdm" },
+	{ .clkdm_name = "eve4_clkdm" },
+	{ .clkdm_name = "gmac_clkdm" },
+	{ .clkdm_name = "gpu_clkdm" },
+	{ .clkdm_name = "ipu_clkdm" },
+	{ .clkdm_name = "ipu1_clkdm" },
+	{ .clkdm_name = "ipu2_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ .clkdm_name = "l3init_clkdm" },
+	{ .clkdm_name = "l4per_clkdm" },
+	{ .clkdm_name = "l4per2_clkdm" },
+	{ .clkdm_name = "l4per3_clkdm" },
+	{ .clkdm_name = "l4sec_clkdm" },
+	{ .clkdm_name = "pcie_clkdm" },
+	{ .clkdm_name = "vpe_clkdm" },
+	{ .clkdm_name = "wkupaon_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep dsp2_wkup_sleep_deps[] = {
+	{ .clkdm_name = "atl_clkdm" },
+	{ .clkdm_name = "cam_clkdm" },
+	{ .clkdm_name = "dsp1_clkdm" },
+	{ .clkdm_name = "dss_clkdm" },
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "eve1_clkdm" },
+	{ .clkdm_name = "eve2_clkdm" },
+	{ .clkdm_name = "eve3_clkdm" },
+	{ .clkdm_name = "eve4_clkdm" },
+	{ .clkdm_name = "gmac_clkdm" },
+	{ .clkdm_name = "gpu_clkdm" },
+	{ .clkdm_name = "ipu_clkdm" },
+	{ .clkdm_name = "ipu1_clkdm" },
+	{ .clkdm_name = "ipu2_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ .clkdm_name = "l3init_clkdm" },
+	{ .clkdm_name = "l4per_clkdm" },
+	{ .clkdm_name = "l4per2_clkdm" },
+	{ .clkdm_name = "l4per3_clkdm" },
+	{ .clkdm_name = "l4sec_clkdm" },
+	{ .clkdm_name = "pcie_clkdm" },
+	{ .clkdm_name = "vpe_clkdm" },
+	{ .clkdm_name = "wkupaon_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep dss_wkup_sleep_deps[] = {
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep eve1_wkup_sleep_deps[] = {
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "eve2_clkdm" },
+	{ .clkdm_name = "eve3_clkdm" },
+	{ .clkdm_name = "eve4_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep eve2_wkup_sleep_deps[] = {
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "eve1_clkdm" },
+	{ .clkdm_name = "eve3_clkdm" },
+	{ .clkdm_name = "eve4_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep eve3_wkup_sleep_deps[] = {
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "eve1_clkdm" },
+	{ .clkdm_name = "eve2_clkdm" },
+	{ .clkdm_name = "eve4_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep eve4_wkup_sleep_deps[] = {
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "eve1_clkdm" },
+	{ .clkdm_name = "eve2_clkdm" },
+	{ .clkdm_name = "eve3_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep gmac_wkup_sleep_deps[] = {
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "l4per2_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep gpu_wkup_sleep_deps[] = {
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep ipu1_wkup_sleep_deps[] = {
+	{ .clkdm_name = "atl_clkdm" },
+	{ .clkdm_name = "dsp1_clkdm" },
+	{ .clkdm_name = "dsp2_clkdm" },
+	{ .clkdm_name = "dss_clkdm" },
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "eve1_clkdm" },
+	{ .clkdm_name = "eve2_clkdm" },
+	{ .clkdm_name = "eve3_clkdm" },
+	{ .clkdm_name = "eve4_clkdm" },
+	{ .clkdm_name = "gmac_clkdm" },
+	{ .clkdm_name = "gpu_clkdm" },
+	{ .clkdm_name = "ipu_clkdm" },
+	{ .clkdm_name = "ipu2_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ .clkdm_name = "l3init_clkdm" },
+	{ .clkdm_name = "l3main1_clkdm" },
+	{ .clkdm_name = "l4cfg_clkdm" },
+	{ .clkdm_name = "l4per_clkdm" },
+	{ .clkdm_name = "l4per2_clkdm" },
+	{ .clkdm_name = "l4per3_clkdm" },
+	{ .clkdm_name = "l4sec_clkdm" },
+	{ .clkdm_name = "pcie_clkdm" },
+	{ .clkdm_name = "vpe_clkdm" },
+	{ .clkdm_name = "wkupaon_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep ipu2_wkup_sleep_deps[] = {
+	{ .clkdm_name = "atl_clkdm" },
+	{ .clkdm_name = "dsp1_clkdm" },
+	{ .clkdm_name = "dsp2_clkdm" },
+	{ .clkdm_name = "dss_clkdm" },
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "eve1_clkdm" },
+	{ .clkdm_name = "eve2_clkdm" },
+	{ .clkdm_name = "eve3_clkdm" },
+	{ .clkdm_name = "eve4_clkdm" },
+	{ .clkdm_name = "gmac_clkdm" },
+	{ .clkdm_name = "gpu_clkdm" },
+	{ .clkdm_name = "ipu_clkdm" },
+	{ .clkdm_name = "ipu1_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ .clkdm_name = "l3init_clkdm" },
+	{ .clkdm_name = "l3main1_clkdm" },
+	{ .clkdm_name = "l4cfg_clkdm" },
+	{ .clkdm_name = "l4per_clkdm" },
+	{ .clkdm_name = "l4per2_clkdm" },
+	{ .clkdm_name = "l4per3_clkdm" },
+	{ .clkdm_name = "l4sec_clkdm" },
+	{ .clkdm_name = "pcie_clkdm" },
+	{ .clkdm_name = "vpe_clkdm" },
+	{ .clkdm_name = "wkupaon_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep iva_wkup_sleep_deps[] = {
+	{ .clkdm_name = "emif_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep l3init_wkup_sleep_deps[] = {
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ .clkdm_name = "l4cfg_clkdm" },
+	{ .clkdm_name = "l4per_clkdm" },
+	{ .clkdm_name = "l4per3_clkdm" },
+	{ .clkdm_name = "l4sec_clkdm" },
+	{ .clkdm_name = "wkupaon_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep l4per2_wkup_sleep_deps[] = {
+	{ .clkdm_name = "dsp1_clkdm" },
+	{ .clkdm_name = "dsp2_clkdm" },
+	{ .clkdm_name = "ipu1_clkdm" },
+	{ .clkdm_name = "ipu2_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep l4sec_wkup_sleep_deps[] = {
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "l4per_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep mpu_wkup_sleep_deps[] = {
+	{ .clkdm_name = "cam_clkdm" },
+	{ .clkdm_name = "dsp1_clkdm" },
+	{ .clkdm_name = "dsp2_clkdm" },
+	{ .clkdm_name = "dss_clkdm" },
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "eve1_clkdm" },
+	{ .clkdm_name = "eve2_clkdm" },
+	{ .clkdm_name = "eve3_clkdm" },
+	{ .clkdm_name = "eve4_clkdm" },
+	{ .clkdm_name = "gmac_clkdm" },
+	{ .clkdm_name = "gpu_clkdm" },
+	{ .clkdm_name = "ipu_clkdm" },
+	{ .clkdm_name = "ipu1_clkdm" },
+	{ .clkdm_name = "ipu2_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ .clkdm_name = "l3init_clkdm" },
+	{ .clkdm_name = "l3main1_clkdm" },
+	{ .clkdm_name = "l4cfg_clkdm" },
+	{ .clkdm_name = "l4per_clkdm" },
+	{ .clkdm_name = "l4per2_clkdm" },
+	{ .clkdm_name = "l4per3_clkdm" },
+	{ .clkdm_name = "l4sec_clkdm" },
+	{ .clkdm_name = "pcie_clkdm" },
+	{ .clkdm_name = "vpe_clkdm" },
+	{ .clkdm_name = "wkupaon_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep pcie_wkup_sleep_deps[] = {
+	{ .clkdm_name = "atl_clkdm" },
+	{ .clkdm_name = "cam_clkdm" },
+	{ .clkdm_name = "dsp1_clkdm" },
+	{ .clkdm_name = "dsp2_clkdm" },
+	{ .clkdm_name = "dss_clkdm" },
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "eve1_clkdm" },
+	{ .clkdm_name = "eve2_clkdm" },
+	{ .clkdm_name = "eve3_clkdm" },
+	{ .clkdm_name = "eve4_clkdm" },
+	{ .clkdm_name = "gmac_clkdm" },
+	{ .clkdm_name = "gpu_clkdm" },
+	{ .clkdm_name = "ipu_clkdm" },
+	{ .clkdm_name = "ipu1_clkdm" },
+	{ .clkdm_name = "iva_clkdm" },
+	{ .clkdm_name = "l3init_clkdm" },
+	{ .clkdm_name = "l4cfg_clkdm" },
+	{ .clkdm_name = "l4per_clkdm" },
+	{ .clkdm_name = "l4per2_clkdm" },
+	{ .clkdm_name = "l4per3_clkdm" },
+	{ .clkdm_name = "l4sec_clkdm" },
+	{ .clkdm_name = "vpe_clkdm" },
+	{ NULL },
+};
+
+static struct clkdm_dep vpe_wkup_sleep_deps[] = {
+	{ .clkdm_name = "emif_clkdm" },
+	{ .clkdm_name = "l4per3_clkdm" },
+	{ NULL },
+};
+
+static struct clockdomain l4per3_7xx_clkdm = {
+	.name		  = "l4per3_clkdm",
+	.pwrdm		  = { .name = "l4per_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_L4PER_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_L4PER_L4PER3_CDOFFS,
+	.dep_bit	  = DRA7XX_L4PER3_STATDEP_SHIFT,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain l4per2_7xx_clkdm = {
+	.name		  = "l4per2_clkdm",
+	.pwrdm		  = { .name = "l4per_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_L4PER_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_L4PER_L4PER2_CDOFFS,
+	.dep_bit	  = DRA7XX_L4PER2_STATDEP_SHIFT,
+	.wkdep_srcs	  = l4per2_wkup_sleep_deps,
+	.sleepdep_srcs	  = l4per2_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain mpu0_7xx_clkdm = {
+	.name		  = "mpu0_clkdm",
+	.pwrdm		  = { .name = "cpu0_pwrdm" },
+	.prcm_partition	  = DRA7XX_MPU_PRCM_PARTITION,
+	.cm_inst	  = DRA7XX_MPU_PRCM_CM_C0_INST,
+	.clkdm_offs	  = DRA7XX_MPU_PRCM_CM_C0_CPU0_CDOFFS,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+};
+
+static struct clockdomain iva_7xx_clkdm = {
+	.name		  = "iva_clkdm",
+	.pwrdm		  = { .name = "iva_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_IVA_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_IVA_IVA_CDOFFS,
+	.dep_bit	  = DRA7XX_IVA_STATDEP_SHIFT,
+	.wkdep_srcs	  = iva_wkup_sleep_deps,
+	.sleepdep_srcs	  = iva_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain coreaon_7xx_clkdm = {
+	.name		  = "coreaon_clkdm",
+	.pwrdm		  = { .name = "coreaon_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_COREAON_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_COREAON_COREAON_CDOFFS,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+};
+
+static struct clockdomain ipu1_7xx_clkdm = {
+	.name		  = "ipu1_clkdm",
+	.pwrdm		  = { .name = "ipu_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_AON_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_AON_IPU_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_AON_IPU_IPU1_CDOFFS,
+	.dep_bit	  = DRA7XX_IPU1_STATDEP_SHIFT,
+	.wkdep_srcs	  = ipu1_wkup_sleep_deps,
+	.sleepdep_srcs	  = ipu1_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain ipu2_7xx_clkdm = {
+	.name		  = "ipu2_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_CORE_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_CORE_IPU2_CDOFFS,
+	.dep_bit	  = DRA7XX_IPU2_STATDEP_SHIFT,
+	.wkdep_srcs	  = ipu2_wkup_sleep_deps,
+	.sleepdep_srcs	  = ipu2_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain l3init_7xx_clkdm = {
+	.name		  = "l3init_clkdm",
+	.pwrdm		  = { .name = "l3init_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_L3INIT_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_L3INIT_L3INIT_CDOFFS,
+	.dep_bit	  = DRA7XX_L3INIT_STATDEP_SHIFT,
+	.wkdep_srcs	  = l3init_wkup_sleep_deps,
+	.sleepdep_srcs	  = l3init_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain l4sec_7xx_clkdm = {
+	.name		  = "l4sec_clkdm",
+	.pwrdm		  = { .name = "l4per_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_L4PER_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_L4PER_L4SEC_CDOFFS,
+	.dep_bit	  = DRA7XX_L4SEC_STATDEP_SHIFT,
+	.wkdep_srcs	  = l4sec_wkup_sleep_deps,
+	.sleepdep_srcs	  = l4sec_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain l3main1_7xx_clkdm = {
+	.name		  = "l3main1_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_CORE_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_CORE_L3MAIN1_CDOFFS,
+	.dep_bit	  = DRA7XX_L3MAIN1_STATDEP_SHIFT,
+	.flags		  = CLKDM_CAN_HWSUP,
+};
+
+static struct clockdomain vpe_7xx_clkdm = {
+	.name		  = "vpe_clkdm",
+	.pwrdm		  = { .name = "vpe_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_AON_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_AON_VPE_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_AON_VPE_VPE_CDOFFS,
+	.dep_bit	  = DRA7XX_VPE_STATDEP_SHIFT,
+	.wkdep_srcs	  = vpe_wkup_sleep_deps,
+	.sleepdep_srcs	  = vpe_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain mpu_7xx_clkdm = {
+	.name		  = "mpu_clkdm",
+	.pwrdm		  = { .name = "mpu_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_AON_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_AON_MPU_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_AON_MPU_MPU_CDOFFS,
+	.wkdep_srcs	  = mpu_wkup_sleep_deps,
+	.sleepdep_srcs	  = mpu_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+};
+
+static struct clockdomain custefuse_7xx_clkdm = {
+	.name		  = "custefuse_clkdm",
+	.pwrdm		  = { .name = "custefuse_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_CUSTEFUSE_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_CUSTEFUSE_CUSTEFUSE_CDOFFS,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+};
+
+static struct clockdomain ipu_7xx_clkdm = {
+	.name		  = "ipu_clkdm",
+	.pwrdm		  = { .name = "ipu_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_AON_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_AON_IPU_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_AON_IPU_IPU_CDOFFS,
+	.dep_bit	  = DRA7XX_IPU_STATDEP_SHIFT,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain mpu1_7xx_clkdm = {
+	.name		  = "mpu1_clkdm",
+	.pwrdm		  = { .name = "cpu1_pwrdm" },
+	.prcm_partition	  = DRA7XX_MPU_PRCM_PARTITION,
+	.cm_inst	  = DRA7XX_MPU_PRCM_CM_C1_INST,
+	.clkdm_offs	  = DRA7XX_MPU_PRCM_CM_C1_CPU1_CDOFFS,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+};
+
+static struct clockdomain gmac_7xx_clkdm = {
+	.name		  = "gmac_clkdm",
+	.pwrdm		  = { .name = "l3init_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_L3INIT_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_L3INIT_GMAC_CDOFFS,
+	.dep_bit	  = DRA7XX_GMAC_STATDEP_SHIFT,
+	.wkdep_srcs	  = gmac_wkup_sleep_deps,
+	.sleepdep_srcs	  = gmac_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain l4cfg_7xx_clkdm = {
+	.name		  = "l4cfg_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_CORE_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_CORE_L4CFG_CDOFFS,
+	.dep_bit	  = DRA7XX_L4CFG_STATDEP_SHIFT,
+	.flags		  = CLKDM_CAN_HWSUP,
+};
+
+static struct clockdomain dma_7xx_clkdm = {
+	.name		  = "dma_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_CORE_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_CORE_DMA_CDOFFS,
+	.wkdep_srcs	  = dma_wkup_sleep_deps,
+	.sleepdep_srcs	  = dma_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+};
+
+static struct clockdomain rtc_7xx_clkdm = {
+	.name		  = "rtc_clkdm",
+	.pwrdm		  = { .name = "rtc_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_AON_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_AON_RTC_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_AON_RTC_RTC_CDOFFS,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+};
+
+static struct clockdomain pcie_7xx_clkdm = {
+	.name		  = "pcie_clkdm",
+	.pwrdm		  = { .name = "l3init_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_L3INIT_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_L3INIT_PCIE_CDOFFS,
+	.dep_bit	  = DRA7XX_PCIE_STATDEP_SHIFT,
+	.wkdep_srcs	  = pcie_wkup_sleep_deps,
+	.sleepdep_srcs	  = pcie_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain atl_7xx_clkdm = {
+	.name		  = "atl_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_CORE_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_CORE_ATL_CDOFFS,
+	.dep_bit	  = DRA7XX_ATL_STATDEP_SHIFT,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+};
+
+static struct clockdomain l3instr_7xx_clkdm = {
+	.name		  = "l3instr_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_CORE_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_CORE_L3INSTR_CDOFFS,
+};
+
+static struct clockdomain dss_7xx_clkdm = {
+	.name		  = "dss_clkdm",
+	.pwrdm		  = { .name = "dss_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_DSS_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_DSS_DSS_CDOFFS,
+	.dep_bit	  = DRA7XX_DSS_STATDEP_SHIFT,
+	.wkdep_srcs	  = dss_wkup_sleep_deps,
+	.sleepdep_srcs	  = dss_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain emif_7xx_clkdm = {
+	.name		  = "emif_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_CORE_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_CORE_EMIF_CDOFFS,
+	.dep_bit	  = DRA7XX_EMIF_STATDEP_SHIFT,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+};
+
+static struct clockdomain emu_7xx_clkdm = {
+	.name		  = "emu_clkdm",
+	.pwrdm		  = { .name = "emu_pwrdm" },
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.cm_inst	  = DRA7XX_PRM_EMU_CM_INST,
+	.clkdm_offs	  = DRA7XX_PRM_EMU_CM_EMU_CDOFFS,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+};
+
+static struct clockdomain dsp2_7xx_clkdm = {
+	.name		  = "dsp2_clkdm",
+	.pwrdm		  = { .name = "dsp2_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_AON_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_AON_DSP2_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_AON_DSP2_DSP2_CDOFFS,
+	.dep_bit	  = DRA7XX_DSP2_STATDEP_SHIFT,
+	.wkdep_srcs	  = dsp2_wkup_sleep_deps,
+	.sleepdep_srcs	  = dsp2_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain dsp1_7xx_clkdm = {
+	.name		  = "dsp1_clkdm",
+	.pwrdm		  = { .name = "dsp1_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_AON_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_AON_DSP1_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_AON_DSP1_DSP1_CDOFFS,
+	.dep_bit	  = DRA7XX_DSP1_STATDEP_SHIFT,
+	.wkdep_srcs	  = dsp1_wkup_sleep_deps,
+	.sleepdep_srcs	  = dsp1_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain cam_7xx_clkdm = {
+	.name		  = "cam_clkdm",
+	.pwrdm		  = { .name = "cam_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_CAM_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_CAM_CAM_CDOFFS,
+	.dep_bit	  = DRA7XX_CAM_STATDEP_SHIFT,
+	.wkdep_srcs	  = cam_wkup_sleep_deps,
+	.sleepdep_srcs	  = cam_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain l4per_7xx_clkdm = {
+	.name		  = "l4per_clkdm",
+	.pwrdm		  = { .name = "l4per_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_L4PER_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_L4PER_L4PER_CDOFFS,
+	.dep_bit	  = DRA7XX_L4PER_STATDEP_SHIFT,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain gpu_7xx_clkdm = {
+	.name		  = "gpu_clkdm",
+	.pwrdm		  = { .name = "gpu_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_GPU_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_GPU_GPU_CDOFFS,
+	.dep_bit	  = DRA7XX_GPU_STATDEP_SHIFT,
+	.wkdep_srcs	  = gpu_wkup_sleep_deps,
+	.sleepdep_srcs	  = gpu_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain eve4_7xx_clkdm = {
+	.name		  = "eve4_clkdm",
+	.pwrdm		  = { .name = "eve4_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_AON_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_AON_EVE4_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_AON_EVE4_EVE4_CDOFFS,
+	.dep_bit	  = DRA7XX_EVE4_STATDEP_SHIFT,
+	.wkdep_srcs	  = eve4_wkup_sleep_deps,
+	.sleepdep_srcs	  = eve4_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain eve2_7xx_clkdm = {
+	.name		  = "eve2_clkdm",
+	.pwrdm		  = { .name = "eve2_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_AON_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_AON_EVE2_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_AON_EVE2_EVE2_CDOFFS,
+	.dep_bit	  = DRA7XX_EVE2_STATDEP_SHIFT,
+	.wkdep_srcs	  = eve2_wkup_sleep_deps,
+	.sleepdep_srcs	  = eve2_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain eve3_7xx_clkdm = {
+	.name		  = "eve3_clkdm",
+	.pwrdm		  = { .name = "eve3_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_AON_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_AON_EVE3_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_AON_EVE3_EVE3_CDOFFS,
+	.dep_bit	  = DRA7XX_EVE3_STATDEP_SHIFT,
+	.wkdep_srcs	  = eve3_wkup_sleep_deps,
+	.sleepdep_srcs	  = eve3_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+static struct clockdomain wkupaon_7xx_clkdm = {
+	.name		  = "wkupaon_clkdm",
+	.pwrdm		  = { .name = "wkupaon_pwrdm" },
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.cm_inst	  = DRA7XX_PRM_WKUPAON_CM_INST,
+	.clkdm_offs	  = DRA7XX_PRM_WKUPAON_CM_WKUPAON_CDOFFS,
+	.dep_bit	  = DRA7XX_WKUPAON_STATDEP_SHIFT,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+};
+
+static struct clockdomain eve1_7xx_clkdm = {
+	.name		  = "eve1_clkdm",
+	.pwrdm		  = { .name = "eve1_pwrdm" },
+	.prcm_partition	  = DRA7XX_CM_CORE_AON_PARTITION,
+	.cm_inst	  = DRA7XX_CM_CORE_AON_EVE1_INST,
+	.clkdm_offs	  = DRA7XX_CM_CORE_AON_EVE1_EVE1_CDOFFS,
+	.dep_bit	  = DRA7XX_EVE1_STATDEP_SHIFT,
+	.wkdep_srcs	  = eve1_wkup_sleep_deps,
+	.sleepdep_srcs	  = eve1_wkup_sleep_deps,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+};
+
+/* As clockdomains are added or removed above, this list must also be changed */
+static struct clockdomain *clockdomains_dra7xx[] __initdata = {
+	&l4per3_7xx_clkdm,
+	&l4per2_7xx_clkdm,
+	&mpu0_7xx_clkdm,
+	&iva_7xx_clkdm,
+	&coreaon_7xx_clkdm,
+	&ipu1_7xx_clkdm,
+	&ipu2_7xx_clkdm,
+	&l3init_7xx_clkdm,
+	&l4sec_7xx_clkdm,
+	&l3main1_7xx_clkdm,
+	&vpe_7xx_clkdm,
+	&mpu_7xx_clkdm,
+	&custefuse_7xx_clkdm,
+	&ipu_7xx_clkdm,
+	&mpu1_7xx_clkdm,
+	&gmac_7xx_clkdm,
+	&l4cfg_7xx_clkdm,
+	&dma_7xx_clkdm,
+	&rtc_7xx_clkdm,
+	&pcie_7xx_clkdm,
+	&atl_7xx_clkdm,
+	&l3instr_7xx_clkdm,
+	&dss_7xx_clkdm,
+	&emif_7xx_clkdm,
+	&emu_7xx_clkdm,
+	&dsp2_7xx_clkdm,
+	&dsp1_7xx_clkdm,
+	&cam_7xx_clkdm,
+	&l4per_7xx_clkdm,
+	&gpu_7xx_clkdm,
+	&eve4_7xx_clkdm,
+	&eve2_7xx_clkdm,
+	&eve3_7xx_clkdm,
+	&wkupaon_7xx_clkdm,
+	&eve1_7xx_clkdm,
+	NULL
+};
+
+void __init dra7xx_clockdomains_init(void)
+{
+	clkdm_register_platform_funcs(&omap4_clkdm_operations);
+	clkdm_register_clkdms(clockdomains_dra7xx);
+	clkdm_complete_init();
+}
diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h b/arch/arm/mach-omap2/cm-regbits-24xx.h
index 669ef51..8538669 100644
--- a/arch/arm/mach-omap2/cm-regbits-24xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-24xx.h
@@ -14,439 +14,121 @@
  * published by the Free Software Foundation.
  */
 
-/* Bits shared between registers */
-
-/* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */
 #define OMAP24XX_EN_CAM_SHIFT				31
-#define OMAP24XX_EN_CAM_MASK				(1 << 31)
 #define OMAP24XX_EN_WDT4_SHIFT				29
-#define OMAP24XX_EN_WDT4_MASK				(1 << 29)
 #define OMAP2420_EN_WDT3_SHIFT				28
-#define OMAP2420_EN_WDT3_MASK				(1 << 28)
 #define OMAP24XX_EN_MSPRO_SHIFT				27
-#define OMAP24XX_EN_MSPRO_MASK				(1 << 27)
 #define OMAP24XX_EN_FAC_SHIFT				25
-#define OMAP24XX_EN_FAC_MASK				(1 << 25)
 #define OMAP2420_EN_EAC_SHIFT				24
-#define OMAP2420_EN_EAC_MASK				(1 << 24)
 #define OMAP24XX_EN_HDQ_SHIFT				23
-#define OMAP24XX_EN_HDQ_MASK				(1 << 23)
 #define OMAP2420_EN_I2C2_SHIFT				20
-#define OMAP2420_EN_I2C2_MASK				(1 << 20)
 #define OMAP2420_EN_I2C1_SHIFT				19
-#define OMAP2420_EN_I2C1_MASK				(1 << 19)
-
-/* CM_FCLKEN2_CORE and CM_ICLKEN2_CORE shared bits */
 #define OMAP2430_EN_MCBSP5_SHIFT			5
-#define OMAP2430_EN_MCBSP5_MASK				(1 << 5)
 #define OMAP2430_EN_MCBSP4_SHIFT			4
-#define OMAP2430_EN_MCBSP4_MASK				(1 << 4)
 #define OMAP2430_EN_MCBSP3_SHIFT			3
-#define OMAP2430_EN_MCBSP3_MASK				(1 << 3)
 #define OMAP24XX_EN_SSI_SHIFT				1
-#define OMAP24XX_EN_SSI_MASK				(1 << 1)
-
-/* CM_FCLKEN_WKUP and CM_ICLKEN_WKUP shared bits */
 #define OMAP24XX_EN_MPU_WDT_SHIFT			3
-#define OMAP24XX_EN_MPU_WDT_MASK			(1 << 3)
-
-/* Bits specific to each register */
-
-/* CM_IDLEST_MPU */
-/* 2430 only */
-#define OMAP2430_ST_MPU_MASK				(1 << 0)
-
-/* CM_CLKSEL_MPU */
 #define OMAP24XX_CLKSEL_MPU_SHIFT			0
-#define OMAP24XX_CLKSEL_MPU_MASK			(0x1f << 0)
 #define OMAP24XX_CLKSEL_MPU_WIDTH			5
-
-/* CM_CLKSTCTRL_MPU */
-#define OMAP24XX_AUTOSTATE_MPU_SHIFT			0
 #define OMAP24XX_AUTOSTATE_MPU_MASK			(1 << 0)
-
-/* CM_FCLKEN1_CORE specific bits*/
 #define OMAP24XX_EN_TV_SHIFT				2
-#define OMAP24XX_EN_TV_MASK				(1 << 2)
 #define OMAP24XX_EN_DSS2_SHIFT				1
-#define OMAP24XX_EN_DSS2_MASK				(1 << 1)
 #define OMAP24XX_EN_DSS1_SHIFT				0
 #define OMAP24XX_EN_DSS1_MASK				(1 << 0)
-
-/* CM_FCLKEN2_CORE specific bits */
 #define OMAP2430_EN_I2CHS2_SHIFT			20
-#define OMAP2430_EN_I2CHS2_MASK				(1 << 20)
 #define OMAP2430_EN_I2CHS1_SHIFT			19
-#define OMAP2430_EN_I2CHS1_MASK				(1 << 19)
 #define OMAP2430_EN_MMCHSDB2_SHIFT			17
-#define OMAP2430_EN_MMCHSDB2_MASK			(1 << 17)
 #define OMAP2430_EN_MMCHSDB1_SHIFT			16
-#define OMAP2430_EN_MMCHSDB1_MASK			(1 << 16)
-
-/* CM_ICLKEN1_CORE specific bits */
 #define OMAP24XX_EN_MAILBOXES_SHIFT			30
-#define OMAP24XX_EN_MAILBOXES_MASK			(1 << 30)
-#define OMAP24XX_EN_DSS_SHIFT				0
-#define OMAP24XX_EN_DSS_MASK				(1 << 0)
-
-/* CM_ICLKEN2_CORE specific bits */
-
-/* CM_ICLKEN3_CORE */
-/* 2430 only */
 #define OMAP2430_EN_SDRC_SHIFT				2
-#define OMAP2430_EN_SDRC_MASK				(1 << 2)
-
-/* CM_ICLKEN4_CORE */
 #define OMAP24XX_EN_PKA_SHIFT				4
-#define OMAP24XX_EN_PKA_MASK				(1 << 4)
 #define OMAP24XX_EN_AES_SHIFT				3
-#define OMAP24XX_EN_AES_MASK				(1 << 3)
 #define OMAP24XX_EN_RNG_SHIFT				2
-#define OMAP24XX_EN_RNG_MASK				(1 << 2)
 #define OMAP24XX_EN_SHA_SHIFT				1
-#define OMAP24XX_EN_SHA_MASK				(1 << 1)
 #define OMAP24XX_EN_DES_SHIFT				0
-#define OMAP24XX_EN_DES_MASK				(1 << 0)
-
-/* CM_IDLEST1_CORE specific bits */
 #define OMAP24XX_ST_MAILBOXES_SHIFT			30
-#define OMAP24XX_ST_MAILBOXES_MASK			(1 << 30)
-#define OMAP24XX_ST_WDT4_SHIFT				29
-#define OMAP24XX_ST_WDT4_MASK				(1 << 29)
-#define OMAP2420_ST_WDT3_SHIFT				28
-#define OMAP2420_ST_WDT3_MASK				(1 << 28)
-#define OMAP24XX_ST_MSPRO_SHIFT				27
-#define OMAP24XX_ST_MSPRO_MASK				(1 << 27)
-#define OMAP24XX_ST_FAC_SHIFT				25
-#define OMAP24XX_ST_FAC_MASK				(1 << 25)
-#define OMAP2420_ST_EAC_SHIFT				24
-#define OMAP2420_ST_EAC_MASK				(1 << 24)
 #define OMAP24XX_ST_HDQ_SHIFT				23
-#define OMAP24XX_ST_HDQ_MASK				(1 << 23)
 #define OMAP2420_ST_I2C2_SHIFT				20
-#define OMAP2420_ST_I2C2_MASK				(1 << 20)
 #define OMAP2430_ST_I2CHS1_SHIFT			19
-#define OMAP2430_ST_I2CHS1_MASK				(1 << 19)
 #define OMAP2420_ST_I2C1_SHIFT				19
-#define OMAP2420_ST_I2C1_MASK				(1 << 19)
 #define OMAP2430_ST_I2CHS2_SHIFT			20
-#define OMAP2430_ST_I2CHS2_MASK				(1 << 20)
 #define OMAP24XX_ST_MCBSP2_SHIFT			16
-#define OMAP24XX_ST_MCBSP2_MASK				(1 << 16)
 #define OMAP24XX_ST_MCBSP1_SHIFT			15
-#define OMAP24XX_ST_MCBSP1_MASK				(1 << 15)
 #define OMAP24XX_ST_DSS_SHIFT				0
-#define OMAP24XX_ST_DSS_MASK				(1 << 0)
-
-/* CM_IDLEST2_CORE */
 #define OMAP2430_ST_MCBSP5_SHIFT			5
-#define OMAP2430_ST_MCBSP5_MASK				(1 << 5)
 #define OMAP2430_ST_MCBSP4_SHIFT			4
-#define OMAP2430_ST_MCBSP4_MASK				(1 << 4)
 #define OMAP2430_ST_MCBSP3_SHIFT			3
-#define OMAP2430_ST_MCBSP3_MASK				(1 << 3)
-#define OMAP24XX_ST_SSI_SHIFT				1
-#define OMAP24XX_ST_SSI_MASK				(1 << 1)
-
-/* CM_IDLEST3_CORE */
-/* 2430 only */
-#define OMAP2430_ST_SDRC_MASK				(1 << 2)
-
-/* CM_IDLEST4_CORE */
-#define OMAP24XX_ST_PKA_SHIFT				4
-#define OMAP24XX_ST_PKA_MASK				(1 << 4)
 #define OMAP24XX_ST_AES_SHIFT				3
-#define OMAP24XX_ST_AES_MASK				(1 << 3)
 #define OMAP24XX_ST_RNG_SHIFT				2
-#define OMAP24XX_ST_RNG_MASK				(1 << 2)
 #define OMAP24XX_ST_SHA_SHIFT				1
-#define OMAP24XX_ST_SHA_MASK				(1 << 1)
-#define OMAP24XX_ST_DES_SHIFT				0
-#define OMAP24XX_ST_DES_MASK				(1 << 0)
-
-/* CM_AUTOIDLE1_CORE */
-#define OMAP24XX_AUTO_CAM_MASK				(1 << 31)
-#define OMAP24XX_AUTO_MAILBOXES_MASK			(1 << 30)
-#define OMAP24XX_AUTO_WDT4_MASK				(1 << 29)
-#define OMAP2420_AUTO_WDT3_MASK				(1 << 28)
-#define OMAP24XX_AUTO_MSPRO_MASK			(1 << 27)
-#define OMAP2420_AUTO_MMC_MASK				(1 << 26)
-#define OMAP24XX_AUTO_FAC_MASK				(1 << 25)
-#define OMAP2420_AUTO_EAC_MASK				(1 << 24)
-#define OMAP24XX_AUTO_HDQ_MASK				(1 << 23)
-#define OMAP24XX_AUTO_UART2_MASK			(1 << 22)
-#define OMAP24XX_AUTO_UART1_MASK			(1 << 21)
-#define OMAP24XX_AUTO_I2C2_MASK				(1 << 20)
-#define OMAP24XX_AUTO_I2C1_MASK				(1 << 19)
-#define OMAP24XX_AUTO_MCSPI2_MASK			(1 << 18)
-#define OMAP24XX_AUTO_MCSPI1_MASK			(1 << 17)
-#define OMAP24XX_AUTO_MCBSP2_MASK			(1 << 16)
-#define OMAP24XX_AUTO_MCBSP1_MASK			(1 << 15)
-#define OMAP24XX_AUTO_GPT12_MASK			(1 << 14)
-#define OMAP24XX_AUTO_GPT11_MASK			(1 << 13)
-#define OMAP24XX_AUTO_GPT10_MASK			(1 << 12)
-#define OMAP24XX_AUTO_GPT9_MASK				(1 << 11)
-#define OMAP24XX_AUTO_GPT8_MASK				(1 << 10)
-#define OMAP24XX_AUTO_GPT7_MASK				(1 << 9)
-#define OMAP24XX_AUTO_GPT6_MASK				(1 << 8)
-#define OMAP24XX_AUTO_GPT5_MASK				(1 << 7)
-#define OMAP24XX_AUTO_GPT4_MASK				(1 << 6)
-#define OMAP24XX_AUTO_GPT3_MASK				(1 << 5)
-#define OMAP24XX_AUTO_GPT2_MASK				(1 << 4)
-#define OMAP2420_AUTO_VLYNQ_MASK			(1 << 3)
-#define OMAP24XX_AUTO_DSS_MASK				(1 << 0)
-
-/* CM_AUTOIDLE2_CORE */
-#define OMAP2430_AUTO_MDM_INTC_MASK			(1 << 11)
-#define OMAP2430_AUTO_GPIO5_MASK			(1 << 10)
-#define OMAP2430_AUTO_MCSPI3_MASK			(1 << 9)
-#define OMAP2430_AUTO_MMCHS2_MASK			(1 << 8)
-#define OMAP2430_AUTO_MMCHS1_MASK			(1 << 7)
-#define OMAP2430_AUTO_USBHS_MASK			(1 << 6)
-#define OMAP2430_AUTO_MCBSP5_MASK			(1 << 5)
-#define OMAP2430_AUTO_MCBSP4_MASK			(1 << 4)
-#define OMAP2430_AUTO_MCBSP3_MASK			(1 << 3)
-#define OMAP24XX_AUTO_UART3_MASK			(1 << 2)
-#define OMAP24XX_AUTO_SSI_MASK				(1 << 1)
-#define OMAP24XX_AUTO_USB_MASK				(1 << 0)
-
-/* CM_AUTOIDLE3_CORE */
 #define OMAP24XX_AUTO_SDRC_SHIFT			2
-#define OMAP24XX_AUTO_SDRC_MASK				(1 << 2)
 #define OMAP24XX_AUTO_GPMC_SHIFT			1
-#define OMAP24XX_AUTO_GPMC_MASK				(1 << 1)
 #define OMAP24XX_AUTO_SDMA_SHIFT			0
-#define OMAP24XX_AUTO_SDMA_MASK				(1 << 0)
-
-/* CM_AUTOIDLE4_CORE */
-#define OMAP24XX_AUTO_PKA_MASK				(1 << 4)
-#define OMAP24XX_AUTO_AES_MASK				(1 << 3)
-#define OMAP24XX_AUTO_RNG_MASK				(1 << 2)
-#define OMAP24XX_AUTO_SHA_MASK				(1 << 1)
-#define OMAP24XX_AUTO_DES_MASK				(1 << 0)
-
-/* CM_CLKSEL1_CORE */
-#define OMAP24XX_CLKSEL_USB_SHIFT			25
 #define OMAP24XX_CLKSEL_USB_MASK			(0x7 << 25)
-#define OMAP24XX_CLKSEL_SSI_SHIFT			20
 #define OMAP24XX_CLKSEL_SSI_MASK			(0x1f << 20)
-#define OMAP2420_CLKSEL_VLYNQ_SHIFT			15
 #define OMAP2420_CLKSEL_VLYNQ_MASK			(0x1f << 15)
-#define OMAP24XX_CLKSEL_DSS2_SHIFT			13
 #define OMAP24XX_CLKSEL_DSS2_MASK			(0x1 << 13)
-#define OMAP24XX_CLKSEL_DSS1_SHIFT			8
 #define OMAP24XX_CLKSEL_DSS1_MASK			(0x1f << 8)
 #define OMAP24XX_CLKSEL_L4_SHIFT			5
-#define OMAP24XX_CLKSEL_L4_MASK				(0x3 << 5)
 #define OMAP24XX_CLKSEL_L4_WIDTH			2
 #define OMAP24XX_CLKSEL_L3_SHIFT			0
-#define OMAP24XX_CLKSEL_L3_MASK				(0x1f << 0)
 #define OMAP24XX_CLKSEL_L3_WIDTH			5
-
-/* CM_CLKSEL2_CORE */
-#define OMAP24XX_CLKSEL_GPT12_SHIFT			22
 #define OMAP24XX_CLKSEL_GPT12_MASK			(0x3 << 22)
-#define OMAP24XX_CLKSEL_GPT11_SHIFT			20
 #define OMAP24XX_CLKSEL_GPT11_MASK			(0x3 << 20)
-#define OMAP24XX_CLKSEL_GPT10_SHIFT			18
 #define OMAP24XX_CLKSEL_GPT10_MASK			(0x3 << 18)
-#define OMAP24XX_CLKSEL_GPT9_SHIFT			16
 #define OMAP24XX_CLKSEL_GPT9_MASK			(0x3 << 16)
-#define OMAP24XX_CLKSEL_GPT8_SHIFT			14
 #define OMAP24XX_CLKSEL_GPT8_MASK			(0x3 << 14)
-#define OMAP24XX_CLKSEL_GPT7_SHIFT			12
 #define OMAP24XX_CLKSEL_GPT7_MASK			(0x3 << 12)
-#define OMAP24XX_CLKSEL_GPT6_SHIFT			10
 #define OMAP24XX_CLKSEL_GPT6_MASK			(0x3 << 10)
-#define OMAP24XX_CLKSEL_GPT5_SHIFT			8
 #define OMAP24XX_CLKSEL_GPT5_MASK			(0x3 << 8)
-#define OMAP24XX_CLKSEL_GPT4_SHIFT			6
 #define OMAP24XX_CLKSEL_GPT4_MASK			(0x3 << 6)
-#define OMAP24XX_CLKSEL_GPT3_SHIFT			4
 #define OMAP24XX_CLKSEL_GPT3_MASK			(0x3 << 4)
-#define OMAP24XX_CLKSEL_GPT2_SHIFT			2
 #define OMAP24XX_CLKSEL_GPT2_MASK			(0x3 << 2)
-
-/* CM_CLKSTCTRL_CORE */
-#define OMAP24XX_AUTOSTATE_DSS_SHIFT			2
 #define OMAP24XX_AUTOSTATE_DSS_MASK			(1 << 2)
-#define OMAP24XX_AUTOSTATE_L4_SHIFT			1
 #define OMAP24XX_AUTOSTATE_L4_MASK			(1 << 1)
-#define OMAP24XX_AUTOSTATE_L3_SHIFT			0
 #define OMAP24XX_AUTOSTATE_L3_MASK			(1 << 0)
-
-/* CM_FCLKEN_GFX */
 #define OMAP24XX_EN_3D_SHIFT				2
-#define OMAP24XX_EN_3D_MASK				(1 << 2)
 #define OMAP24XX_EN_2D_SHIFT				1
-#define OMAP24XX_EN_2D_MASK				(1 << 1)
-
-/* CM_ICLKEN_GFX specific bits */
-
-/* CM_IDLEST_GFX specific bits */
-
-/* CM_CLKSEL_GFX specific bits */
-
-/* CM_CLKSTCTRL_GFX */
-#define OMAP24XX_AUTOSTATE_GFX_SHIFT			0
 #define OMAP24XX_AUTOSTATE_GFX_MASK			(1 << 0)
-
-/* CM_FCLKEN_WKUP specific bits */
-
-/* CM_ICLKEN_WKUP specific bits */
 #define OMAP2430_EN_ICR_SHIFT				6
-#define OMAP2430_EN_ICR_MASK				(1 << 6)
 #define OMAP24XX_EN_OMAPCTRL_SHIFT			5
-#define OMAP24XX_EN_OMAPCTRL_MASK			(1 << 5)
 #define OMAP24XX_EN_WDT1_SHIFT				4
-#define OMAP24XX_EN_WDT1_MASK				(1 << 4)
 #define OMAP24XX_EN_32KSYNC_SHIFT			1
-#define OMAP24XX_EN_32KSYNC_MASK			(1 << 1)
-
-/* CM_IDLEST_WKUP specific bits */
-#define OMAP2430_ST_ICR_SHIFT				6
-#define OMAP2430_ST_ICR_MASK				(1 << 6)
-#define OMAP24XX_ST_OMAPCTRL_SHIFT			5
-#define OMAP24XX_ST_OMAPCTRL_MASK			(1 << 5)
-#define OMAP24XX_ST_WDT1_SHIFT				4
-#define OMAP24XX_ST_WDT1_MASK				(1 << 4)
 #define OMAP24XX_ST_MPU_WDT_SHIFT			3
-#define OMAP24XX_ST_MPU_WDT_MASK			(1 << 3)
 #define OMAP24XX_ST_32KSYNC_SHIFT			1
-#define OMAP24XX_ST_32KSYNC_MASK			(1 << 1)
-
-/* CM_AUTOIDLE_WKUP */
-#define OMAP24XX_AUTO_OMAPCTRL_MASK			(1 << 5)
-#define OMAP24XX_AUTO_WDT1_MASK				(1 << 4)
-#define OMAP24XX_AUTO_MPU_WDT_MASK			(1 << 3)
-#define OMAP24XX_AUTO_GPIOS_MASK			(1 << 2)
-#define OMAP24XX_AUTO_32KSYNC_MASK			(1 << 1)
-#define OMAP24XX_AUTO_GPT1_MASK				(1 << 0)
-
-/* CM_CLKSEL_WKUP */
-#define OMAP24XX_CLKSEL_GPT1_SHIFT			0
 #define OMAP24XX_CLKSEL_GPT1_MASK			(0x3 << 0)
-
-/* CM_CLKEN_PLL */
 #define OMAP24XX_EN_54M_PLL_SHIFT			6
-#define OMAP24XX_EN_54M_PLL_MASK			(0x3 << 6)
 #define OMAP24XX_EN_96M_PLL_SHIFT			2
-#define OMAP24XX_EN_96M_PLL_MASK			(0x3 << 2)
-#define OMAP24XX_EN_DPLL_SHIFT				0
 #define OMAP24XX_EN_DPLL_MASK				(0x3 << 0)
-
-/* CM_IDLEST_CKGEN */
 #define OMAP24XX_ST_54M_APLL_SHIFT			9
-#define OMAP24XX_ST_54M_APLL_MASK			(1 << 9)
 #define OMAP24XX_ST_96M_APLL_SHIFT			8
-#define OMAP24XX_ST_96M_APLL_MASK			(1 << 8)
-#define OMAP24XX_ST_54M_CLK_MASK			(1 << 6)
-#define OMAP24XX_ST_12M_CLK_MASK			(1 << 5)
-#define OMAP24XX_ST_48M_CLK_MASK			(1 << 4)
-#define OMAP24XX_ST_96M_CLK_MASK			(1 << 2)
-#define OMAP24XX_ST_CORE_CLK_SHIFT			0
-#define OMAP24XX_ST_CORE_CLK_MASK			(0x3 << 0)
-
-/* CM_AUTOIDLE_PLL */
-#define OMAP24XX_AUTO_54M_SHIFT				6
 #define OMAP24XX_AUTO_54M_MASK				(0x3 << 6)
-#define OMAP24XX_AUTO_96M_SHIFT				2
 #define OMAP24XX_AUTO_96M_MASK				(0x3 << 2)
 #define OMAP24XX_AUTO_DPLL_SHIFT			0
 #define OMAP24XX_AUTO_DPLL_MASK				(0x3 << 0)
-
-/* CM_CLKSEL1_PLL */
-#define OMAP2430_MAXDPLLFASTLOCK_SHIFT			28
-#define OMAP2430_MAXDPLLFASTLOCK_MASK			(0x7 << 28)
 #define OMAP24XX_APLLS_CLKIN_SHIFT			23
 #define OMAP24XX_APLLS_CLKIN_MASK			(0x7 << 23)
-#define OMAP24XX_DPLL_MULT_SHIFT			12
 #define OMAP24XX_DPLL_MULT_MASK				(0x3ff << 12)
-#define OMAP24XX_DPLL_DIV_SHIFT				8
 #define OMAP24XX_DPLL_DIV_MASK				(0xf << 8)
 #define OMAP24XX_54M_SOURCE_SHIFT			5
-#define OMAP24XX_54M_SOURCE_MASK			(1 << 5)
 #define OMAP24XX_54M_SOURCE_WIDTH			1
 #define OMAP2430_96M_SOURCE_SHIFT			4
-#define OMAP2430_96M_SOURCE_MASK			(1 << 4)
 #define OMAP2430_96M_SOURCE_WIDTH			1
-#define OMAP24XX_48M_SOURCE_SHIFT			3
 #define OMAP24XX_48M_SOURCE_MASK			(1 << 3)
-#define OMAP2430_ALTCLK_SOURCE_SHIFT			0
-#define OMAP2430_ALTCLK_SOURCE_MASK			(0x7 << 0)
-
-/* CM_CLKSEL2_PLL */
-#define OMAP24XX_CORE_CLK_SRC_SHIFT			0
 #define OMAP24XX_CORE_CLK_SRC_MASK			(0x3 << 0)
-
-/* CM_FCLKEN_DSP */
 #define OMAP2420_EN_IVA_COP_SHIFT			10
-#define OMAP2420_EN_IVA_COP_MASK			(1 << 10)
 #define OMAP2420_EN_IVA_MPU_SHIFT			8
-#define OMAP2420_EN_IVA_MPU_MASK			(1 << 8)
 #define OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT		0
-#define OMAP24XX_CM_FCLKEN_DSP_EN_DSP_MASK		(1 << 0)
-
-/* CM_ICLKEN_DSP */
 #define OMAP2420_EN_DSP_IPI_SHIFT			1
-#define OMAP2420_EN_DSP_IPI_MASK			(1 << 1)
-
-/* CM_IDLEST_DSP */
-#define OMAP2420_ST_IVA_MASK				(1 << 8)
-#define OMAP2420_ST_IPI_MASK				(1 << 1)
-#define OMAP24XX_ST_DSP_MASK				(1 << 0)
-
-/* CM_AUTOIDLE_DSP */
-#define OMAP2420_AUTO_DSP_IPI_MASK			(1 << 1)
-
-/* CM_CLKSEL_DSP */
-#define OMAP2420_SYNC_IVA_MASK				(1 << 13)
-#define OMAP2420_CLKSEL_IVA_SHIFT			8
 #define OMAP2420_CLKSEL_IVA_MASK			(0x1f << 8)
-#define OMAP24XX_SYNC_DSP_MASK				(1 << 7)
-#define OMAP24XX_CLKSEL_DSP_IF_SHIFT			5
 #define OMAP24XX_CLKSEL_DSP_IF_MASK			(0x3 << 5)
-#define OMAP24XX_CLKSEL_DSP_SHIFT			0
 #define OMAP24XX_CLKSEL_DSP_MASK			(0x1f << 0)
-
-/* CM_CLKSTCTRL_DSP */
-#define OMAP2420_AUTOSTATE_IVA_SHIFT			8
 #define OMAP2420_AUTOSTATE_IVA_MASK			(1 << 8)
-#define OMAP24XX_AUTOSTATE_DSP_SHIFT			0
 #define OMAP24XX_AUTOSTATE_DSP_MASK			(1 << 0)
-
-/* CM_FCLKEN_MDM */
-/* 2430 only */
 #define OMAP2430_EN_OSC_SHIFT				1
-#define OMAP2430_EN_OSC_MASK				(1 << 1)
-
-/* CM_ICLKEN_MDM */
-/* 2430 only */
 #define OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT		0
-#define OMAP2430_CM_ICLKEN_MDM_EN_MDM_MASK		(1 << 0)
-
-/* CM_IDLEST_MDM specific bits */
-/* 2430 only */
-
-/* CM_AUTOIDLE_MDM */
-/* 2430 only */
-#define OMAP2430_AUTO_OSC_MASK				(1 << 1)
-#define OMAP2430_AUTO_MDM_MASK				(1 << 0)
-
-/* CM_CLKSEL_MDM */
-/* 2430 only */
-#define OMAP2430_SYNC_MDM_MASK				(1 << 4)
-#define OMAP2430_CLKSEL_MDM_SHIFT			0
 #define OMAP2430_CLKSEL_MDM_MASK			(0xf << 0)
-
-/* CM_CLKSTCTRL_MDM */
-/* 2430 only */
-#define OMAP2430_AUTOSTATE_MDM_SHIFT			0
 #define OMAP2430_AUTOSTATE_MDM_MASK			(1 << 0)
-
-/* OMAP24XX CM_CLKSTCTRL_*.AUTOSTATE_* register bit values */
 #define OMAP24XX_CLKSTCTRL_DISABLE_AUTO		0x0
 #define OMAP24XX_CLKSTCTRL_ENABLE_AUTO		0x1
-
-
 #endif
diff --git a/arch/arm/mach-omap2/cm-regbits-33xx.h b/arch/arm/mach-omap2/cm-regbits-33xx.h
index adf7bb7..c0823fd 100644
--- a/arch/arm/mach-omap2/cm-regbits-33xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-33xx.h
@@ -20,798 +20,49 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_33XX_H
 #define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_33XX_H
 
-/*
- * Used by CM_AUTOIDLE_DPLL_CORE, CM_AUTOIDLE_DPLL_DDR, CM_AUTOIDLE_DPLL_DISP,
- * CM_AUTOIDLE_DPLL_MPU, CM_AUTOIDLE_DPLL_PER
- */
-#define AM33XX_AUTO_DPLL_MODE_SHIFT			0
-#define AM33XX_AUTO_DPLL_MODE_WIDTH			3
-#define AM33XX_AUTO_DPLL_MODE_MASK			(0x7 << 0)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_ADC_FCLK_SHIFT		14
-#define AM33XX_CLKACTIVITY_ADC_FCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_ADC_FCLK_MASK		(1 << 16)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_CAN_CLK_SHIFT		11
-#define AM33XX_CLKACTIVITY_CAN_CLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_CAN_CLK_MASK			(1 << 11)
-
-/* Used by CM_PER_CLK_24MHZ_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_SHIFT		4
-#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_MASK		(1 << 4)
-
-/* Used by CM_PER_CPSW_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_SHIFT	4
-#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_WIDTH	1
-#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_MASK	(1 << 4)
-
-/* Used by CM_PER_L4HS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_SHIFT	4
-#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_WIDTH	1
-#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_MASK	(1 << 4)
-
-/* Used by CM_PER_L4HS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_SHIFT	5
-#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_WIDTH	1
-#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_MASK		(1 << 5)
-
-/* Used by CM_PER_L4HS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_SHIFT		6
-#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_MASK		(1 << 6)
-
-/* Used by CM_PER_L3_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_SHIFT		6
-#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_MASK		(1 << 6)
-
-/* Used by CM_CEFUSE_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT	9
-#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_WIDTH	1
-#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK	(1 << 9)
-
-/* Used by CM_L3_AON_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_DBGSYSCLK_SHIFT		2
-#define AM33XX_CLKACTIVITY_DBGSYSCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_DBGSYSCLK_MASK		(1 << 2)
-
-/* Used by CM_L3_AON_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_DEBUG_CLKA_SHIFT		4
-#define AM33XX_CLKACTIVITY_DEBUG_CLKA_WIDTH		1
-#define AM33XX_CLKACTIVITY_DEBUG_CLKA_MASK		(1 << 4)
-
-/* Used by CM_PER_L3_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_EMIF_GCLK_SHIFT		2
-#define AM33XX_CLKACTIVITY_EMIF_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_EMIF_GCLK_MASK		(1 << 2)
-
-/* Used by CM_GFX_L3_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_GFX_FCLK_SHIFT		9
-#define AM33XX_CLKACTIVITY_GFX_FCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_GFX_FCLK_MASK		(1 << 9)
-
-/* Used by CM_GFX_L3_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_SHIFT		8
-#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_MASK		(1 << 8)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_SHIFT		8
-#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_MASK		(1 << 8)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_SHIFT		19
-#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_MASK		(1 << 19)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_SHIFT		20
-#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_MASK		(1 << 20)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_SHIFT		21
-#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_MASK		(1 << 21)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_SHIFT		22
-#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_MASK		(1 << 22)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_SHIFT		26
-#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_MASK		(1 << 26)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_SHIFT		18
-#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_MASK		(1 << 18)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_I2C0_GFCLK_SHIFT		11
-#define AM33XX_CLKACTIVITY_I2C0_GFCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_I2C0_GFCLK_MASK		(1 << 11)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_I2C_FCLK_SHIFT		24
-#define AM33XX_CLKACTIVITY_I2C_FCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_I2C_FCLK_MASK		(1 << 24)
-
-/* Used by CM_PER_PRUSS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_SHIFT		5
-#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_MASK		(1 << 5)
-
-/* Used by CM_PER_PRUSS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_SHIFT		4
-#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_MASK		(1 << 4)
-
-/* Used by CM_PER_PRUSS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_SHIFT	6
-#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_WIDTH	1
-#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_MASK		(1 << 6)
-
-/* Used by CM_PER_L3S_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_L3S_GCLK_SHIFT		3
-#define AM33XX_CLKACTIVITY_L3S_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_L3S_GCLK_MASK		(1 << 3)
-
-/* Used by CM_L3_AON_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_L3_AON_GCLK_SHIFT		3
-#define AM33XX_CLKACTIVITY_L3_AON_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_L3_AON_GCLK_MASK		(1 << 3)
-
-/* Used by CM_PER_L3_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_L3_GCLK_SHIFT		4
-#define AM33XX_CLKACTIVITY_L3_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_L3_GCLK_MASK			(1 << 4)
-
-/* Used by CM_PER_L4FW_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_L4FW_GCLK_SHIFT		8
-#define AM33XX_CLKACTIVITY_L4FW_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_L4FW_GCLK_MASK		(1 << 8)
-
-/* Used by CM_PER_L4HS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_L4HS_GCLK_SHIFT		3
-#define AM33XX_CLKACTIVITY_L4HS_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_L4HS_GCLK_MASK		(1 << 3)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_L4LS_GCLK_SHIFT		8
-#define AM33XX_CLKACTIVITY_L4LS_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_L4LS_GCLK_MASK		(1 << 8)
-
-/* Used by CM_GFX_L4LS_GFX_CLKSTCTRL__1 */
-#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_SHIFT		8
-#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_MASK		(1 << 8)
-
-/* Used by CM_CEFUSE_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT	8
-#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_WIDTH	1
-#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_MASK		(1 << 8)
-
-/* Used by CM_RTC_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_SHIFT		8
-#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_MASK		(1 << 8)
-
-/* Used by CM_L4_WKUP_AON_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_SHIFT	2
-#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_WIDTH	1
-#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_MASK	(1 << 2)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_SHIFT		2
-#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_MASK		(1 << 2)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_LCDC_GCLK_SHIFT		17
-#define AM33XX_CLKACTIVITY_LCDC_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_LCDC_GCLK_MASK		(1 << 17)
-
-/* Used by CM_PER_LCDC_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_SHIFT	4
-#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_WIDTH	1
-#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_MASK	(1 << 4)
-
-/* Used by CM_PER_LCDC_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_SHIFT	5
-#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_WIDTH	1
-#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_MASK	(1 << 5)
-
-/* Used by CM_PER_L3_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_MCASP_GCLK_SHIFT		7
-#define AM33XX_CLKACTIVITY_MCASP_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_MCASP_GCLK_MASK		(1 << 7)
-
-/* Used by CM_PER_L3_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_MMC_FCLK_SHIFT		3
-#define AM33XX_CLKACTIVITY_MMC_FCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_MMC_FCLK_MASK		(1 << 3)
-
-/* Used by CM_MPU_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_MPU_CLK_SHIFT		2
-#define AM33XX_CLKACTIVITY_MPU_CLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_MPU_CLK_MASK			(1 << 2)
-
-/* Used by CM_PER_OCPWP_L3_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_SHIFT		4
-#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_MASK		(1 << 4)
-
-/* Used by CM_PER_OCPWP_L3_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_SHIFT		5
-#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_MASK		(1 << 5)
-
-/* Used by CM_RTC_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_RTC_32KCLK_SHIFT		9
-#define AM33XX_CLKACTIVITY_RTC_32KCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_RTC_32KCLK_MASK		(1 << 9)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_SPI_GCLK_SHIFT		25
-#define AM33XX_CLKACTIVITY_SPI_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_SPI_GCLK_MASK		(1 << 25)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_SR_SYSCLK_SHIFT		3
-#define AM33XX_CLKACTIVITY_SR_SYSCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_SR_SYSCLK_MASK		(1 << 3)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_TIMER0_GCLK_SHIFT		10
-#define AM33XX_CLKACTIVITY_TIMER0_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_TIMER0_GCLK_MASK		(1 << 10)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_TIMER1_GCLK_SHIFT		13
-#define AM33XX_CLKACTIVITY_TIMER1_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_TIMER1_GCLK_MASK		(1 << 13)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_TIMER2_GCLK_SHIFT		14
-#define AM33XX_CLKACTIVITY_TIMER2_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_TIMER2_GCLK_MASK		(1 << 14)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_TIMER3_GCLK_SHIFT		15
-#define AM33XX_CLKACTIVITY_TIMER3_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_TIMER3_GCLK_MASK		(1 << 15)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_TIMER4_GCLK_SHIFT		16
-#define AM33XX_CLKACTIVITY_TIMER4_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_TIMER4_GCLK_MASK		(1 << 16)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_TIMER5_GCLK_SHIFT		27
-#define AM33XX_CLKACTIVITY_TIMER5_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_TIMER5_GCLK_MASK		(1 << 27)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_TIMER6_GCLK_SHIFT		28
-#define AM33XX_CLKACTIVITY_TIMER6_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_TIMER6_GCLK_MASK		(1 << 28)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_TIMER7_GCLK_SHIFT		13
-#define AM33XX_CLKACTIVITY_TIMER7_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_TIMER7_GCLK_MASK		(1 << 13)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_UART0_GFCLK_SHIFT		12
-#define AM33XX_CLKACTIVITY_UART0_GFCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_UART0_GFCLK_MASK		(1 << 12)
-
-/* Used by CM_PER_L4LS_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_UART_GFCLK_SHIFT		10
-#define AM33XX_CLKACTIVITY_UART_GFCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_UART_GFCLK_MASK		(1 << 10)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_WDT0_GCLK_SHIFT		9
-#define AM33XX_CLKACTIVITY_WDT0_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_WDT0_GCLK_MASK		(1 << 9)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define AM33XX_CLKACTIVITY_WDT1_GCLK_SHIFT		4
-#define AM33XX_CLKACTIVITY_WDT1_GCLK_WIDTH		1
-#define AM33XX_CLKACTIVITY_WDT1_GCLK_MASK		(1 << 4)
-
-/* Used by CLKSEL_GFX_FCLK */
-#define AM33XX_CLKDIV_SEL_GFX_FCLK_SHIFT		0
-#define AM33XX_CLKDIV_SEL_GFX_FCLK_WIDTH		1
-#define AM33XX_CLKDIV_SEL_GFX_FCLK_MASK			(1 << 0)
-
-/* Used by CM_CLKOUT_CTRL */
 #define AM33XX_CLKOUT2DIV_SHIFT				3
 #define AM33XX_CLKOUT2DIV_WIDTH				3
-#define AM33XX_CLKOUT2DIV_MASK				(0x7 << 3)
-
-/* Used by CM_CLKOUT_CTRL */
 #define AM33XX_CLKOUT2EN_SHIFT				7
-#define AM33XX_CLKOUT2EN_WIDTH				1
-#define AM33XX_CLKOUT2EN_MASK				(1 << 7)
-
-/* Used by CM_CLKOUT_CTRL */
-#define AM33XX_CLKOUT2SOURCE_SHIFT			0
-#define AM33XX_CLKOUT2SOURCE_WIDTH			3
 #define AM33XX_CLKOUT2SOURCE_MASK			(0x7 << 0)
-
-/*
- * Used by CLKSEL_GPIO0_DBCLK, CLKSEL_LCDC_PIXEL_CLK, CLKSEL_TIMER2_CLK,
- * CLKSEL_TIMER3_CLK, CLKSEL_TIMER4_CLK, CLKSEL_TIMER5_CLK, CLKSEL_TIMER6_CLK,
- * CLKSEL_TIMER7_CLK
- */
-#define AM33XX_CLKSEL_SHIFT				0
-#define AM33XX_CLKSEL_WIDTH				1
-#define AM33XX_CLKSEL_MASK				(0x01 << 0)
-
-/*
- * Renamed from CLKSEL Used by CLKSEL_PRUSS_OCP_CLK, CLKSEL_WDT1_CLK,
- * CM_CPTS_RFT_CLKSEL
- */
 #define AM33XX_CLKSEL_0_0_SHIFT				0
 #define AM33XX_CLKSEL_0_0_WIDTH				1
 #define AM33XX_CLKSEL_0_0_MASK				(1 << 0)
-
-#define AM33XX_CLKSEL_0_1_SHIFT				0
-#define AM33XX_CLKSEL_0_1_WIDTH				2
 #define AM33XX_CLKSEL_0_1_MASK				(3 << 0)
-
-/* Renamed from CLKSEL Used by CLKSEL_TIMER1MS_CLK */
-#define AM33XX_CLKSEL_0_2_SHIFT				0
-#define AM33XX_CLKSEL_0_2_WIDTH				3
 #define AM33XX_CLKSEL_0_2_MASK				(7 << 0)
-
-/* Used by CLKSEL_GFX_FCLK */
-#define AM33XX_CLKSEL_GFX_FCLK_SHIFT			1
-#define AM33XX_CLKSEL_GFX_FCLK_WIDTH			1
 #define AM33XX_CLKSEL_GFX_FCLK_MASK			(1 << 1)
-
-/*
- * Used by CM_MPU_CLKSTCTRL, CM_RTC_CLKSTCTRL, CM_PER_CLK_24MHZ_CLKSTCTRL,
- * CM_PER_CPSW_CLKSTCTRL, CM_PER_PRUSS_CLKSTCTRL, CM_PER_L3S_CLKSTCTRL,
- * CM_PER_L3_CLKSTCTRL, CM_PER_L4FW_CLKSTCTRL, CM_PER_L4HS_CLKSTCTRL,
- * CM_PER_L4LS_CLKSTCTRL, CM_PER_LCDC_CLKSTCTRL, CM_PER_OCPWP_L3_CLKSTCTRL,
- * CM_L3_AON_CLKSTCTRL, CM_L4_WKUP_AON_CLKSTCTRL, CM_WKUP_CLKSTCTRL,
- * CM_GFX_L3_CLKSTCTRL, CM_GFX_L4LS_GFX_CLKSTCTRL__1, CM_CEFUSE_CLKSTCTRL
- */
 #define AM33XX_CLKTRCTRL_SHIFT				0
-#define AM33XX_CLKTRCTRL_WIDTH				2
 #define AM33XX_CLKTRCTRL_MASK				(0x3 << 0)
-
-/*
- * Used by CM_SSC_DELTAMSTEP_DPLL_CORE, CM_SSC_DELTAMSTEP_DPLL_DDR,
- * CM_SSC_DELTAMSTEP_DPLL_DISP, CM_SSC_DELTAMSTEP_DPLL_MPU,
- * CM_SSC_DELTAMSTEP_DPLL_PER
- */
-#define AM33XX_DELTAMSTEP_SHIFT				0
-#define AM33XX_DELTAMSTEP_WIDTH				20
-#define AM33XX_DELTAMSTEP_MASK				(0xfffff << 0)
-
-/* Used by CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP, CM_CLKSEL_DPLL_MPU */
-#define AM33XX_DPLL_BYP_CLKSEL_SHIFT			23
-#define AM33XX_DPLL_BYP_CLKSEL_WIDTH			1
-#define AM33XX_DPLL_BYP_CLKSEL_MASK			(1 << 23)
-
-/* Used by CM_CLKDCOLDO_DPLL_PER */
-#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT		8
-#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_WIDTH		1
-#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_MASK		(1 << 8)
-
-/* Used by CM_CLKDCOLDO_DPLL_PER */
-#define AM33XX_DPLL_CLKDCOLDO_PWDN_SHIFT		12
-#define AM33XX_DPLL_CLKDCOLDO_PWDN_WIDTH		1
-#define AM33XX_DPLL_CLKDCOLDO_PWDN_MASK			(1 << 12)
-
-/* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */
 #define AM33XX_DPLL_CLKOUT_DIV_SHIFT			0
 #define AM33XX_DPLL_CLKOUT_DIV_WIDTH			5
-#define AM33XX_DPLL_CLKOUT_DIV_MASK			(0x1f << 0)
-
-/* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_PER */
-#define AM33XX_DPLL_CLKOUT_DIV_0_6_SHIFT		0
-#define AM33XX_DPLL_CLKOUT_DIV_0_6_WIDTH		7
-#define AM33XX_DPLL_CLKOUT_DIV_0_6_MASK			(0x7f << 0)
-
-/* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */
-#define AM33XX_DPLL_CLKOUT_DIVCHACK_SHIFT		5
-#define AM33XX_DPLL_CLKOUT_DIVCHACK_WIDTH		1
-#define AM33XX_DPLL_CLKOUT_DIVCHACK_MASK		(1 << 5)
-
-/* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_PER */
-#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_SHIFT	7
-#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_WIDTH	1
-#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_MASK		(1 << 7)
-
-/*
- * Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU,
- * CM_DIV_M2_DPLL_PER
- */
-#define AM33XX_DPLL_CLKOUT_GATE_CTRL_SHIFT		8
-#define AM33XX_DPLL_CLKOUT_GATE_CTRL_WIDTH		1
-#define AM33XX_DPLL_CLKOUT_GATE_CTRL_MASK		(1 << 8)
-
-/*
- * Used by CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP,
- * CM_CLKSEL_DPLL_MPU
- */
-#define AM33XX_DPLL_DIV_SHIFT				0
-#define AM33XX_DPLL_DIV_WIDTH				7
 #define AM33XX_DPLL_DIV_MASK				(0x7f << 0)
-
 #define AM33XX_DPLL_PER_DIV_MASK			(0xff << 0)
-
-/* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_PERIPH */
-#define AM33XX_DPLL_DIV_0_7_SHIFT			0
-#define AM33XX_DPLL_DIV_0_7_WIDTH			8
-#define AM33XX_DPLL_DIV_0_7_MASK			(0xff << 0)
-
-/*
- * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
- * CM_CLKMODE_DPLL_MPU
- */
-#define AM33XX_DPLL_DRIFTGUARD_EN_SHIFT			8
-#define AM33XX_DPLL_DRIFTGUARD_EN_WIDTH			1
-#define AM33XX_DPLL_DRIFTGUARD_EN_MASK			(1 << 8)
-
-/*
- * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
- * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
- */
-#define AM33XX_DPLL_EN_SHIFT				0
-#define AM33XX_DPLL_EN_WIDTH				3
 #define AM33XX_DPLL_EN_MASK				(0x7 << 0)
-
-/*
- * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
- * CM_CLKMODE_DPLL_MPU
- */
-#define AM33XX_DPLL_LPMODE_EN_SHIFT			10
-#define AM33XX_DPLL_LPMODE_EN_WIDTH			1
-#define AM33XX_DPLL_LPMODE_EN_MASK			(1 << 10)
-
-/*
- * Used by CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP,
- * CM_CLKSEL_DPLL_MPU
- */
-#define AM33XX_DPLL_MULT_SHIFT				8
-#define AM33XX_DPLL_MULT_WIDTH				11
 #define AM33XX_DPLL_MULT_MASK				(0x7ff << 8)
-
-/* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_PERIPH */
-#define AM33XX_DPLL_MULT_PERIPH_SHIFT			8
-#define AM33XX_DPLL_MULT_PERIPH_WIDTH			12
 #define AM33XX_DPLL_MULT_PERIPH_MASK			(0xfff << 8)
-
-/*
- * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
- * CM_CLKMODE_DPLL_MPU
- */
-#define AM33XX_DPLL_REGM4XEN_SHIFT			11
-#define AM33XX_DPLL_REGM4XEN_WIDTH			1
-#define AM33XX_DPLL_REGM4XEN_MASK			(1 << 11)
-
-/* Used by CM_CLKSEL_DPLL_PERIPH */
-#define AM33XX_DPLL_SD_DIV_SHIFT			24
-#define AM33XX_DPLL_SD_DIV_WIDTH			8
-#define AM33XX_DPLL_SD_DIV_MASK				(0xff << 24)
-
-/*
- * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
- * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
- */
-#define AM33XX_DPLL_SSC_ACK_SHIFT			13
-#define AM33XX_DPLL_SSC_ACK_WIDTH			1
-#define AM33XX_DPLL_SSC_ACK_MASK			(1 << 13)
-
-/*
- * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
- * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
- */
-#define AM33XX_DPLL_SSC_DOWNSPREAD_SHIFT		14
-#define AM33XX_DPLL_SSC_DOWNSPREAD_WIDTH		1
-#define AM33XX_DPLL_SSC_DOWNSPREAD_MASK			(1 << 14)
-
-/*
- * Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
- * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
- */
-#define AM33XX_DPLL_SSC_EN_SHIFT			12
-#define AM33XX_DPLL_SSC_EN_WIDTH			1
-#define AM33XX_DPLL_SSC_EN_MASK				(1 << 12)
-
-/* Used by CM_DIV_M4_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT1_DIV_SHIFT		0
 #define AM33XX_HSDIVIDER_CLKOUT1_DIV_WIDTH		5
-#define AM33XX_HSDIVIDER_CLKOUT1_DIV_MASK		(0x1f << 0)
-
-/* Used by CM_DIV_M4_DPLL_CORE */
-#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT		5
-#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_WIDTH		1
-#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_MASK		(1 << 5)
-
-/* Used by CM_DIV_M4_DPLL_CORE */
-#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT	8
-#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_WIDTH	1
-#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK		(1 << 8)
-
-/* Used by CM_DIV_M4_DPLL_CORE */
-#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_SHIFT		12
-#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_WIDTH		1
-#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_MASK		(1 << 12)
-
-/* Used by CM_DIV_M5_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT2_DIV_SHIFT		0
 #define AM33XX_HSDIVIDER_CLKOUT2_DIV_WIDTH		5
-#define AM33XX_HSDIVIDER_CLKOUT2_DIV_MASK		(0x1f << 0)
-
-/* Used by CM_DIV_M5_DPLL_CORE */
-#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT		5
-#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_WIDTH		1
-#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_MASK		(1 << 5)
-
-/* Used by CM_DIV_M5_DPLL_CORE */
-#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT	8
-#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_WIDTH	1
-#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK		(1 << 8)
-
-/* Used by CM_DIV_M5_DPLL_CORE */
-#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_SHIFT		12
-#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_WIDTH		1
-#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_MASK		(1 << 12)
-
-/* Used by CM_DIV_M6_DPLL_CORE */
 #define AM33XX_HSDIVIDER_CLKOUT3_DIV_SHIFT		0
 #define AM33XX_HSDIVIDER_CLKOUT3_DIV_WIDTH		5
-#define AM33XX_HSDIVIDER_CLKOUT3_DIV_MASK		(0x1f << 0)
-
-/* Used by CM_DIV_M6_DPLL_CORE */
-#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT		5
-#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_WIDTH		1
-#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_MASK		(1 << 5)
-
-/* Used by CM_DIV_M6_DPLL_CORE */
-#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT	8
-#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_WIDTH	1
-#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK		(1 << 8)
-
-/* Used by CM_DIV_M6_DPLL_CORE */
-#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_SHIFT		12
-#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_WIDTH		1
-#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_MASK		(1 << 12)
-
-/*
- * Used by CM_MPU_MPU_CLKCTRL, CM_RTC_RTC_CLKCTRL, CM_PER_AES0_CLKCTRL,
- * CM_PER_AES1_CLKCTRL, CM_PER_CLKDIV32K_CLKCTRL, CM_PER_CPGMAC0_CLKCTRL,
- * CM_PER_DCAN0_CLKCTRL, CM_PER_DCAN1_CLKCTRL, CM_PER_DES_CLKCTRL,
- * CM_PER_ELM_CLKCTRL, CM_PER_EMIF_CLKCTRL, CM_PER_EMIF_FW_CLKCTRL,
- * CM_PER_EPWMSS0_CLKCTRL, CM_PER_EPWMSS1_CLKCTRL, CM_PER_EPWMSS2_CLKCTRL,
- * CM_PER_GPIO1_CLKCTRL, CM_PER_GPIO2_CLKCTRL, CM_PER_GPIO3_CLKCTRL,
- * CM_PER_GPIO4_CLKCTRL, CM_PER_GPIO5_CLKCTRL, CM_PER_GPIO6_CLKCTRL,
- * CM_PER_GPMC_CLKCTRL, CM_PER_I2C1_CLKCTRL, CM_PER_I2C2_CLKCTRL,
- * CM_PER_PRUSS_CLKCTRL, CM_PER_IEEE5000_CLKCTRL, CM_PER_L3_CLKCTRL,
- * CM_PER_L3_INSTR_CLKCTRL, CM_PER_L4FW_CLKCTRL, CM_PER_L4HS_CLKCTRL,
- * CM_PER_L4LS_CLKCTRL, CM_PER_LCDC_CLKCTRL, CM_PER_MAILBOX0_CLKCTRL,
- * CM_PER_MAILBOX1_CLKCTRL, CM_PER_MCASP0_CLKCTRL, CM_PER_MCASP1_CLKCTRL,
- * CM_PER_MCASP2_CLKCTRL, CM_PER_MLB_CLKCTRL, CM_PER_MMC0_CLKCTRL,
- * CM_PER_MMC1_CLKCTRL, CM_PER_MMC2_CLKCTRL, CM_PER_MSTR_EXPS_CLKCTRL,
- * CM_PER_OCMCRAM_CLKCTRL, CM_PER_OCPWP_CLKCTRL, CM_PER_PCIE_CLKCTRL,
- * CM_PER_PKA_CLKCTRL, CM_PER_RNG_CLKCTRL, CM_PER_SHA0_CLKCTRL,
- * CM_PER_SLV_EXPS_CLKCTRL, CM_PER_SPARE0_CLKCTRL, CM_PER_SPARE1_CLKCTRL,
- * CM_PER_SPARE_CLKCTRL, CM_PER_SPI0_CLKCTRL, CM_PER_SPI1_CLKCTRL,
- * CM_PER_SPI2_CLKCTRL, CM_PER_SPI3_CLKCTRL, CM_PER_SPINLOCK_CLKCTRL,
- * CM_PER_TIMER2_CLKCTRL, CM_PER_TIMER3_CLKCTRL, CM_PER_TIMER4_CLKCTRL,
- * CM_PER_TIMER5_CLKCTRL, CM_PER_TIMER6_CLKCTRL, CM_PER_TIMER7_CLKCTRL,
- * CM_PER_TPCC_CLKCTRL, CM_PER_TPTC0_CLKCTRL, CM_PER_TPTC1_CLKCTRL,
- * CM_PER_TPTC2_CLKCTRL, CM_PER_UART1_CLKCTRL, CM_PER_UART2_CLKCTRL,
- * CM_PER_UART3_CLKCTRL, CM_PER_UART4_CLKCTRL, CM_PER_UART5_CLKCTRL,
- * CM_PER_USB0_CLKCTRL, CM_WKUP_ADC_TSC_CLKCTRL, CM_WKUP_CONTROL_CLKCTRL,
- * CM_WKUP_DEBUGSS_CLKCTRL, CM_WKUP_GPIO0_CLKCTRL, CM_WKUP_I2C0_CLKCTRL,
- * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SMARTREFLEX0_CLKCTRL,
- * CM_WKUP_SMARTREFLEX1_CLKCTRL, CM_WKUP_TIMER0_CLKCTRL,
- * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_UART0_CLKCTRL, CM_WKUP_WDT0_CLKCTRL,
- * CM_WKUP_WDT1_CLKCTRL, CM_GFX_BITBLT_CLKCTRL, CM_GFX_GFX_CLKCTRL,
- * CM_GFX_MMUCFG_CLKCTRL, CM_GFX_MMUDATA_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL
- */
 #define AM33XX_IDLEST_SHIFT				16
-#define AM33XX_IDLEST_WIDTH				2
 #define AM33XX_IDLEST_MASK				(0x3 << 16)
-
-/* Used by CM_MAC_CLKSEL */
-#define AM33XX_MII_CLK_SEL_SHIFT			2
-#define AM33XX_MII_CLK_SEL_WIDTH			1
-#define AM33XX_MII_CLK_SEL_MASK				(1 << 2)
-
-/*
- * Used by CM_SSC_MODFREQDIV_DPLL_CORE, CM_SSC_MODFREQDIV_DPLL_DDR,
- * CM_SSC_MODFREQDIV_DPLL_DISP, CM_SSC_MODFREQDIV_DPLL_MPU,
- * CM_SSC_MODFREQDIV_DPLL_PER
- */
-#define AM33XX_MODFREQDIV_EXPONENT_SHIFT		8
-#define AM33XX_MODFREQDIV_EXPONENT_WIDTH		3
-#define AM33XX_MODFREQDIV_EXPONENT_MASK			(0x7 << 8)
-
-/*
- * Used by CM_SSC_MODFREQDIV_DPLL_CORE, CM_SSC_MODFREQDIV_DPLL_DDR,
- * CM_SSC_MODFREQDIV_DPLL_DISP, CM_SSC_MODFREQDIV_DPLL_MPU,
- * CM_SSC_MODFREQDIV_DPLL_PER
- */
-#define AM33XX_MODFREQDIV_MANTISSA_SHIFT		0
-#define AM33XX_MODFREQDIV_MANTISSA_WIDTH		7
-#define AM33XX_MODFREQDIV_MANTISSA_MASK			(0x7f << 0)
-
-/*
- * Used by CM_MPU_MPU_CLKCTRL, CM_RTC_RTC_CLKCTRL, CM_PER_AES0_CLKCTRL,
- * CM_PER_AES1_CLKCTRL, CM_PER_CLKDIV32K_CLKCTRL, CM_PER_CPGMAC0_CLKCTRL,
- * CM_PER_DCAN0_CLKCTRL, CM_PER_DCAN1_CLKCTRL, CM_PER_DES_CLKCTRL,
- * CM_PER_ELM_CLKCTRL, CM_PER_EMIF_CLKCTRL, CM_PER_EMIF_FW_CLKCTRL,
- * CM_PER_EPWMSS0_CLKCTRL, CM_PER_EPWMSS1_CLKCTRL, CM_PER_EPWMSS2_CLKCTRL,
- * CM_PER_GPIO1_CLKCTRL, CM_PER_GPIO2_CLKCTRL, CM_PER_GPIO3_CLKCTRL,
- * CM_PER_GPIO4_CLKCTRL, CM_PER_GPIO5_CLKCTRL, CM_PER_GPIO6_CLKCTRL,
- * CM_PER_GPMC_CLKCTRL, CM_PER_I2C1_CLKCTRL, CM_PER_I2C2_CLKCTRL,
- * CM_PER_PRUSS_CLKCTRL, CM_PER_IEEE5000_CLKCTRL, CM_PER_L3_CLKCTRL,
- * CM_PER_L3_INSTR_CLKCTRL, CM_PER_L4FW_CLKCTRL, CM_PER_L4HS_CLKCTRL,
- * CM_PER_L4LS_CLKCTRL, CM_PER_LCDC_CLKCTRL, CM_PER_MAILBOX0_CLKCTRL,
- * CM_PER_MAILBOX1_CLKCTRL, CM_PER_MCASP0_CLKCTRL, CM_PER_MCASP1_CLKCTRL,
- * CM_PER_MCASP2_CLKCTRL, CM_PER_MLB_CLKCTRL, CM_PER_MMC0_CLKCTRL,
- * CM_PER_MMC1_CLKCTRL, CM_PER_MMC2_CLKCTRL, CM_PER_MSTR_EXPS_CLKCTRL,
- * CM_PER_OCMCRAM_CLKCTRL, CM_PER_OCPWP_CLKCTRL, CM_PER_PCIE_CLKCTRL,
- * CM_PER_PKA_CLKCTRL, CM_PER_RNG_CLKCTRL, CM_PER_SHA0_CLKCTRL,
- * CM_PER_SLV_EXPS_CLKCTRL, CM_PER_SPARE0_CLKCTRL, CM_PER_SPARE1_CLKCTRL,
- * CM_PER_SPARE_CLKCTRL, CM_PER_SPI0_CLKCTRL, CM_PER_SPI1_CLKCTRL,
- * CM_PER_SPI2_CLKCTRL, CM_PER_SPI3_CLKCTRL, CM_PER_SPINLOCK_CLKCTRL,
- * CM_PER_TIMER2_CLKCTRL, CM_PER_TIMER3_CLKCTRL, CM_PER_TIMER4_CLKCTRL,
- * CM_PER_TIMER5_CLKCTRL, CM_PER_TIMER6_CLKCTRL, CM_PER_TIMER7_CLKCTRL,
- * CM_PER_TPCC_CLKCTRL, CM_PER_TPTC0_CLKCTRL, CM_PER_TPTC1_CLKCTRL,
- * CM_PER_TPTC2_CLKCTRL, CM_PER_UART1_CLKCTRL, CM_PER_UART2_CLKCTRL,
- * CM_PER_UART3_CLKCTRL, CM_PER_UART4_CLKCTRL, CM_PER_UART5_CLKCTRL,
- * CM_PER_USB0_CLKCTRL, CM_WKUP_ADC_TSC_CLKCTRL, CM_WKUP_CONTROL_CLKCTRL,
- * CM_WKUP_DEBUGSS_CLKCTRL, CM_WKUP_GPIO0_CLKCTRL, CM_WKUP_I2C0_CLKCTRL,
- * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SMARTREFLEX0_CLKCTRL,
- * CM_WKUP_SMARTREFLEX1_CLKCTRL, CM_WKUP_TIMER0_CLKCTRL,
- * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_UART0_CLKCTRL, CM_WKUP_WDT0_CLKCTRL,
- * CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WKUP_M3_CLKCTRL, CM_GFX_BITBLT_CLKCTRL,
- * CM_GFX_GFX_CLKCTRL, CM_GFX_MMUCFG_CLKCTRL, CM_GFX_MMUDATA_CLKCTRL,
- * CM_CEFUSE_CEFUSE_CLKCTRL
- */
 #define AM33XX_MODULEMODE_SHIFT				0
-#define AM33XX_MODULEMODE_WIDTH				2
 #define AM33XX_MODULEMODE_MASK				(0x3 << 0)
-
-/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
 #define AM33XX_OPTCLK_DEBUG_CLKA_SHIFT			30
-#define AM33XX_OPTCLK_DEBUG_CLKA_WIDTH			1
-#define AM33XX_OPTCLK_DEBUG_CLKA_MASK			(1 << 30)
-
-/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
 #define AM33XX_OPTFCLKEN_DBGSYSCLK_SHIFT		19
-#define AM33XX_OPTFCLKEN_DBGSYSCLK_WIDTH		1
-#define AM33XX_OPTFCLKEN_DBGSYSCLK_MASK			(1 << 19)
-
-/* Used by CM_WKUP_GPIO0_CLKCTRL */
 #define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_SHIFT		18
-#define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_WIDTH		1
-#define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_MASK		(1 << 18)
-
-/* Used by CM_PER_GPIO1_CLKCTRL */
 #define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_SHIFT		18
-#define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_WIDTH		1
-#define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_MASK		(1 << 18)
-
-/* Used by CM_PER_GPIO2_CLKCTRL */
 #define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_SHIFT		18
-#define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_WIDTH		1
-#define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_MASK		(1 << 18)
-
-/* Used by CM_PER_GPIO3_CLKCTRL */
 #define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_SHIFT		18
-#define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_WIDTH		1
-#define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_MASK		(1 << 18)
-
-/* Used by CM_PER_GPIO4_CLKCTRL */
-#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_SHIFT		18
-#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_WIDTH		1
-#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_MASK		(1 << 18)
-
-/* Used by CM_PER_GPIO5_CLKCTRL */
-#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_SHIFT		18
-#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_WIDTH		1
-#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_MASK		(1 << 18)
-
-/* Used by CM_PER_GPIO6_CLKCTRL */
-#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_SHIFT		18
-#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_WIDTH		1
-#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_MASK		(1 << 18)
-
-/*
- * Used by CM_MPU_MPU_CLKCTRL, CM_PER_CPGMAC0_CLKCTRL, CM_PER_PRUSS_CLKCTRL,
- * CM_PER_IEEE5000_CLKCTRL, CM_PER_LCDC_CLKCTRL, CM_PER_MLB_CLKCTRL,
- * CM_PER_MSTR_EXPS_CLKCTRL, CM_PER_OCPWP_CLKCTRL, CM_PER_PCIE_CLKCTRL,
- * CM_PER_SPARE_CLKCTRL, CM_PER_TPTC0_CLKCTRL, CM_PER_TPTC1_CLKCTRL,
- * CM_PER_TPTC2_CLKCTRL, CM_PER_USB0_CLKCTRL, CM_WKUP_DEBUGSS_CLKCTRL,
- * CM_WKUP_WKUP_M3_CLKCTRL, CM_GFX_BITBLT_CLKCTRL, CM_GFX_GFX_CLKCTRL
- */
-#define AM33XX_STBYST_SHIFT				18
-#define AM33XX_STBYST_WIDTH				1
-#define AM33XX_STBYST_MASK				(1 << 18)
-
-/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
 #define AM33XX_STM_PMD_CLKDIVSEL_SHIFT			27
 #define AM33XX_STM_PMD_CLKDIVSEL_WIDTH			3
-#define AM33XX_STM_PMD_CLKDIVSEL_MASK			(0x7 << 27)
-
-/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
 #define AM33XX_STM_PMD_CLKSEL_SHIFT			22
 #define AM33XX_STM_PMD_CLKSEL_WIDTH			2
-#define AM33XX_STM_PMD_CLKSEL_MASK			(0x3 << 22)
-
-/*
- * Used by CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDR, CM_IDLEST_DPLL_DISP,
- * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER
- */
-#define AM33XX_ST_DPLL_CLK_SHIFT			0
-#define AM33XX_ST_DPLL_CLK_WIDTH			1
 #define AM33XX_ST_DPLL_CLK_MASK				(1 << 0)
-
-/* Used by CM_CLKDCOLDO_DPLL_PER */
 #define AM33XX_ST_DPLL_CLKDCOLDO_SHIFT			8
-#define AM33XX_ST_DPLL_CLKDCOLDO_WIDTH			1
-#define AM33XX_ST_DPLL_CLKDCOLDO_MASK			(1 << 8)
-
-/*
- * Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU,
- * CM_DIV_M2_DPLL_PER
- */
-#define AM33XX_ST_DPLL_CLKOUT_SHIFT			9
-#define AM33XX_ST_DPLL_CLKOUT_WIDTH			1
-#define AM33XX_ST_DPLL_CLKOUT_MASK			(1 << 9)
-
-/* Used by CM_DIV_M4_DPLL_CORE */
-#define AM33XX_ST_HSDIVIDER_CLKOUT1_SHIFT		9
-#define AM33XX_ST_HSDIVIDER_CLKOUT1_WIDTH		1
-#define AM33XX_ST_HSDIVIDER_CLKOUT1_MASK		(1 << 9)
-
-/* Used by CM_DIV_M5_DPLL_CORE */
-#define AM33XX_ST_HSDIVIDER_CLKOUT2_SHIFT		9
-#define AM33XX_ST_HSDIVIDER_CLKOUT2_WIDTH		1
-#define AM33XX_ST_HSDIVIDER_CLKOUT2_MASK		(1 << 9)
-
-/* Used by CM_DIV_M6_DPLL_CORE */
-#define AM33XX_ST_HSDIVIDER_CLKOUT3_SHIFT		9
-#define AM33XX_ST_HSDIVIDER_CLKOUT3_WIDTH		1
-#define AM33XX_ST_HSDIVIDER_CLKOUT3_MASK		(1 << 9)
-
-/*
- * Used by CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDR, CM_IDLEST_DPLL_DISP,
- * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER
- */
-#define AM33XX_ST_MN_BYPASS_SHIFT			8
-#define AM33XX_ST_MN_BYPASS_WIDTH			1
-#define AM33XX_ST_MN_BYPASS_MASK			(1 << 8)
-
-/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
 #define AM33XX_TRC_PMD_CLKDIVSEL_SHIFT			24
 #define AM33XX_TRC_PMD_CLKDIVSEL_WIDTH			3
-#define AM33XX_TRC_PMD_CLKDIVSEL_MASK			(0x7 << 24)
-
-/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
 #define AM33XX_TRC_PMD_CLKSEL_SHIFT			20
 #define AM33XX_TRC_PMD_CLKSEL_WIDTH			2
-#define AM33XX_TRC_PMD_CLKSEL_MASK			(0x3 << 20)
-
-/* Used by CONTROL_SEC_CLK_CTRL */
-#define AM33XX_TIMER0_CLKSEL_WIDTH			2
-#define AM33XX_TIMER0_CLKSEL_MASK			(0x3 << 4)
 #endif
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index adf78d3..04dab2f 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -14,833 +14,201 @@
  * published by the Free Software Foundation.
  */
 
-/* Bits shared between registers */
-
-/* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */
-#define OMAP3430ES2_EN_MMC3_MASK			(1 << 30)
 #define OMAP3430ES2_EN_MMC3_SHIFT			30
-#define OMAP3430_EN_MSPRO_MASK				(1 << 23)
 #define OMAP3430_EN_MSPRO_SHIFT				23
-#define OMAP3430_EN_HDQ_MASK				(1 << 22)
 #define OMAP3430_EN_HDQ_SHIFT				22
-#define OMAP3430ES1_EN_FSHOSTUSB_MASK			(1 << 5)
 #define OMAP3430ES1_EN_FSHOSTUSB_SHIFT			5
-#define OMAP3430ES1_EN_D2D_MASK				(1 << 3)
 #define OMAP3430ES1_EN_D2D_SHIFT			3
-#define OMAP3430_EN_SSI_MASK				(1 << 0)
 #define OMAP3430_EN_SSI_SHIFT				0
-
-/* CM_FCLKEN3_CORE and CM_ICLKEN3_CORE shared bits */
 #define OMAP3430ES2_EN_USBTLL_SHIFT			2
-#define OMAP3430ES2_EN_USBTLL_MASK			(1 << 2)
-
-/* CM_FCLKEN_WKUP and CM_ICLKEN_WKUP shared bits */
-#define OMAP3430_EN_WDT2_MASK				(1 << 5)
 #define OMAP3430_EN_WDT2_SHIFT				5
-
-/* CM_ICLKEN_CAM, CM_FCLKEN_CAM shared bits */
-#define OMAP3430_EN_CAM_MASK				(1 << 0)
 #define OMAP3430_EN_CAM_SHIFT				0
-
-/* CM_FCLKEN_PER, CM_ICLKEN_PER shared bits */
-#define OMAP3430_EN_WDT3_MASK				(1 << 12)
 #define OMAP3430_EN_WDT3_SHIFT				12
-
-/* CM_CLKSEL2_EMU, CM_CLKSEL3_EMU shared bits */
-#define OMAP3430_OVERRIDE_ENABLE_MASK			(1 << 19)
-
-
-/* Bits specific to each register */
-
-/* CM_FCLKEN_IVA2 */
 #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK		(1 << 0)
 #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT		0
-
-/* CM_CLKEN_PLL_IVA2 */
-#define OMAP3430_IVA2_DPLL_RAMPTIME_SHIFT		8
-#define OMAP3430_IVA2_DPLL_RAMPTIME_MASK		(0x3 << 8)
-#define OMAP3430_IVA2_DPLL_FREQSEL_SHIFT		4
 #define OMAP3430_IVA2_DPLL_FREQSEL_MASK			(0xf << 4)
 #define OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT		3
-#define OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_MASK		(1 << 3)
-#define OMAP3430_EN_IVA2_DPLL_SHIFT			0
 #define OMAP3430_EN_IVA2_DPLL_MASK			(0x7 << 0)
-
-/* CM_IDLEST_IVA2 */
 #define OMAP3430_ST_IVA2_SHIFT				0
-#define OMAP3430_ST_IVA2_MASK				(1 << 0)
-
-/* CM_IDLEST_PLL_IVA2 */
-#define OMAP3430_ST_IVA2_CLK_SHIFT			0
 #define OMAP3430_ST_IVA2_CLK_MASK			(1 << 0)
-
-/* CM_AUTOIDLE_PLL_IVA2 */
-#define OMAP3430_AUTO_IVA2_DPLL_SHIFT			0
 #define OMAP3430_AUTO_IVA2_DPLL_MASK			(0x7 << 0)
-
-/* CM_CLKSEL1_PLL_IVA2 */
 #define OMAP3430_IVA2_CLK_SRC_SHIFT			19
-#define OMAP3430_IVA2_CLK_SRC_MASK			(0x7 << 19)
 #define OMAP3430_IVA2_CLK_SRC_WIDTH			3
-#define OMAP3430_IVA2_DPLL_MULT_SHIFT			8
 #define OMAP3430_IVA2_DPLL_MULT_MASK			(0x7ff << 8)
-#define OMAP3430_IVA2_DPLL_DIV_SHIFT			0
 #define OMAP3430_IVA2_DPLL_DIV_MASK			(0x7f << 0)
-
-/* CM_CLKSEL2_PLL_IVA2 */
 #define OMAP3430_IVA2_DPLL_CLKOUT_DIV_SHIFT		0
-#define OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK		(0x1f << 0)
 #define OMAP3430_IVA2_DPLL_CLKOUT_DIV_WIDTH		5
-
-/* CM_CLKSTCTRL_IVA2 */
-#define OMAP3430_CLKTRCTRL_IVA2_SHIFT			0
 #define OMAP3430_CLKTRCTRL_IVA2_MASK			(0x3 << 0)
-
-/* CM_CLKSTST_IVA2 */
-#define OMAP3430_CLKACTIVITY_IVA2_SHIFT			0
 #define OMAP3430_CLKACTIVITY_IVA2_MASK			(1 << 0)
-
-/* CM_REVISION specific bits */
-
-/* CM_SYSCONFIG specific bits */
-
-/* CM_CLKEN_PLL_MPU */
-#define OMAP3430_MPU_DPLL_RAMPTIME_SHIFT		8
-#define OMAP3430_MPU_DPLL_RAMPTIME_MASK			(0x3 << 8)
-#define OMAP3430_MPU_DPLL_FREQSEL_SHIFT			4
 #define OMAP3430_MPU_DPLL_FREQSEL_MASK			(0xf << 4)
 #define OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT		3
-#define OMAP3430_EN_MPU_DPLL_DRIFTGUARD_MASK		(1 << 3)
-#define OMAP3430_EN_MPU_DPLL_SHIFT			0
 #define OMAP3430_EN_MPU_DPLL_MASK			(0x7 << 0)
-
-/* CM_IDLEST_MPU */
-#define OMAP3430_ST_MPU_MASK				(1 << 0)
-
-/* CM_IDLEST_PLL_MPU */
 #define OMAP3430_ST_MPU_CLK_SHIFT			0
 #define OMAP3430_ST_MPU_CLK_MASK			(1 << 0)
 #define OMAP3430_ST_MPU_CLK_WIDTH			1
-
-/* CM_AUTOIDLE_PLL_MPU */
-#define OMAP3430_AUTO_MPU_DPLL_SHIFT			0
 #define OMAP3430_AUTO_MPU_DPLL_MASK			(0x7 << 0)
-
-/* CM_CLKSEL1_PLL_MPU */
 #define OMAP3430_MPU_CLK_SRC_SHIFT			19
-#define OMAP3430_MPU_CLK_SRC_MASK			(0x7 << 19)
 #define OMAP3430_MPU_CLK_SRC_WIDTH			3
-#define OMAP3430_MPU_DPLL_MULT_SHIFT			8
 #define OMAP3430_MPU_DPLL_MULT_MASK			(0x7ff << 8)
-#define OMAP3430_MPU_DPLL_DIV_SHIFT			0
 #define OMAP3430_MPU_DPLL_DIV_MASK			(0x7f << 0)
-
-/* CM_CLKSEL2_PLL_MPU */
 #define OMAP3430_MPU_DPLL_CLKOUT_DIV_SHIFT		0
-#define OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK		(0x1f << 0)
 #define OMAP3430_MPU_DPLL_CLKOUT_DIV_WIDTH		5
-
-/* CM_CLKSTCTRL_MPU */
-#define OMAP3430_CLKTRCTRL_MPU_SHIFT			0
 #define OMAP3430_CLKTRCTRL_MPU_MASK			(0x3 << 0)
-
-/* CM_CLKSTST_MPU */
-#define OMAP3430_CLKACTIVITY_MPU_SHIFT			0
-#define OMAP3430_CLKACTIVITY_MPU_MASK			(1 << 0)
-
-/* CM_FCLKEN1_CORE specific bits */
-#define OMAP3430_EN_MODEM_MASK				(1 << 31)
 #define OMAP3430_EN_MODEM_SHIFT				31
-
-/* CM_ICLKEN1_CORE specific bits */
-#define OMAP3430_EN_ICR_MASK				(1 << 29)
 #define OMAP3430_EN_ICR_SHIFT				29
-#define OMAP3430_EN_AES2_MASK				(1 << 28)
 #define OMAP3430_EN_AES2_SHIFT				28
-#define OMAP3430_EN_SHA12_MASK				(1 << 27)
 #define OMAP3430_EN_SHA12_SHIFT				27
-#define OMAP3430_EN_DES2_MASK				(1 << 26)
 #define OMAP3430_EN_DES2_SHIFT				26
-#define OMAP3430ES1_EN_FAC_MASK				(1 << 8)
 #define OMAP3430ES1_EN_FAC_SHIFT			8
-#define OMAP3430_EN_MAILBOXES_MASK			(1 << 7)
 #define OMAP3430_EN_MAILBOXES_SHIFT			7
-#define OMAP3430_EN_OMAPCTRL_MASK			(1 << 6)
 #define OMAP3430_EN_OMAPCTRL_SHIFT			6
-#define OMAP3430_EN_SAD2D_MASK				(1 << 3)
 #define OMAP3430_EN_SAD2D_SHIFT				3
-#define OMAP3430_EN_SDRC_MASK				(1 << 1)
 #define OMAP3430_EN_SDRC_SHIFT				1
-
-/* AM35XX specific CM_ICLKEN1_CORE bits */
-#define AM35XX_EN_IPSS_MASK				(1 << 4)
 #define AM35XX_EN_IPSS_SHIFT				4
-
-/* CM_ICLKEN2_CORE */
-#define OMAP3430_EN_PKA_MASK				(1 << 4)
 #define OMAP3430_EN_PKA_SHIFT				4
-#define OMAP3430_EN_AES1_MASK				(1 << 3)
 #define OMAP3430_EN_AES1_SHIFT				3
-#define OMAP3430_EN_RNG_MASK				(1 << 2)
 #define OMAP3430_EN_RNG_SHIFT				2
-#define OMAP3430_EN_SHA11_MASK				(1 << 1)
 #define OMAP3430_EN_SHA11_SHIFT				1
-#define OMAP3430_EN_DES1_MASK				(1 << 0)
 #define OMAP3430_EN_DES1_SHIFT				0
-
-/* CM_ICLKEN3_CORE */
 #define OMAP3430_EN_MAD2D_SHIFT				3
-#define OMAP3430_EN_MAD2D_MASK				(1 << 3)
-
-/* CM_FCLKEN3_CORE specific bits */
 #define OMAP3430ES2_EN_TS_SHIFT				1
-#define OMAP3430ES2_EN_TS_MASK				(1 << 1)
 #define OMAP3430ES2_EN_CPEFUSE_SHIFT			0
-#define OMAP3430ES2_EN_CPEFUSE_MASK			(1 << 0)
-
-/* CM_IDLEST1_CORE specific bits */
-#define OMAP3430ES2_ST_MMC3_SHIFT			30
-#define OMAP3430ES2_ST_MMC3_MASK			(1 << 30)
-#define OMAP3430_ST_ICR_SHIFT				29
-#define OMAP3430_ST_ICR_MASK				(1 << 29)
 #define OMAP3430_ST_AES2_SHIFT				28
-#define OMAP3430_ST_AES2_MASK				(1 << 28)
 #define OMAP3430_ST_SHA12_SHIFT				27
-#define OMAP3430_ST_SHA12_MASK				(1 << 27)
-#define OMAP3430_ST_DES2_SHIFT				26
-#define OMAP3430_ST_DES2_MASK				(1 << 26)
-#define OMAP3430_ST_MSPRO_SHIFT				23
-#define OMAP3430_ST_MSPRO_MASK				(1 << 23)
 #define AM35XX_ST_UART4_SHIFT				23
-#define AM35XX_ST_UART4_MASK				(1 << 23)
 #define OMAP3430_ST_HDQ_SHIFT				22
-#define OMAP3430_ST_HDQ_MASK				(1 << 22)
-#define OMAP3430ES1_ST_FAC_SHIFT			8
-#define OMAP3430ES1_ST_FAC_MASK				(1 << 8)
 #define OMAP3430ES2_ST_SSI_IDLE_SHIFT			8
-#define OMAP3430ES2_ST_SSI_IDLE_MASK			(1 << 8)
 #define OMAP3430_ST_MAILBOXES_SHIFT			7
-#define OMAP3430_ST_MAILBOXES_MASK			(1 << 7)
-#define OMAP3430_ST_OMAPCTRL_SHIFT			6
-#define OMAP3430_ST_OMAPCTRL_MASK			(1 << 6)
 #define OMAP3430_ST_SAD2D_SHIFT				3
-#define OMAP3430_ST_SAD2D_MASK				(1 << 3)
 #define OMAP3430_ST_SDMA_SHIFT				2
-#define OMAP3430_ST_SDMA_MASK				(1 << 2)
-#define OMAP3430_ST_SDRC_SHIFT				1
-#define OMAP3430_ST_SDRC_MASK				(1 << 1)
-#define OMAP3430_ST_SSI_STDBY_SHIFT			0
-#define OMAP3430_ST_SSI_STDBY_MASK			(1 << 0)
-
-/* AM35xx specific CM_IDLEST1_CORE bits */
 #define AM35XX_ST_IPSS_SHIFT				5
-#define AM35XX_ST_IPSS_MASK 				(1 << 5)
-
-/* CM_IDLEST2_CORE */
-#define OMAP3430_ST_PKA_SHIFT				4
-#define OMAP3430_ST_PKA_MASK				(1 << 4)
-#define OMAP3430_ST_AES1_SHIFT				3
-#define OMAP3430_ST_AES1_MASK				(1 << 3)
-#define OMAP3430_ST_RNG_SHIFT				2
-#define OMAP3430_ST_RNG_MASK				(1 << 2)
-#define OMAP3430_ST_SHA11_SHIFT				1
-#define OMAP3430_ST_SHA11_MASK				(1 << 1)
-#define OMAP3430_ST_DES1_SHIFT				0
-#define OMAP3430_ST_DES1_MASK				(1 << 0)
-
-/* CM_IDLEST3_CORE */
 #define OMAP3430ES2_ST_USBTLL_SHIFT			2
-#define OMAP3430ES2_ST_USBTLL_MASK			(1 << 2)
-#define OMAP3430ES2_ST_CPEFUSE_SHIFT			0
-#define OMAP3430ES2_ST_CPEFUSE_MASK			(1 << 0)
-
-/* CM_AUTOIDLE1_CORE */
-#define OMAP3430_AUTO_MODEM_MASK			(1 << 31)
-#define OMAP3430_AUTO_MODEM_SHIFT			31
-#define OMAP3430ES2_AUTO_MMC3_MASK			(1 << 30)
-#define OMAP3430ES2_AUTO_MMC3_SHIFT			30
-#define OMAP3430ES2_AUTO_ICR_MASK			(1 << 29)
-#define OMAP3430ES2_AUTO_ICR_SHIFT			29
-#define OMAP3430_AUTO_AES2_MASK				(1 << 28)
-#define OMAP3430_AUTO_AES2_SHIFT			28
-#define OMAP3430_AUTO_SHA12_MASK			(1 << 27)
-#define OMAP3430_AUTO_SHA12_SHIFT			27
-#define OMAP3430_AUTO_DES2_MASK				(1 << 26)
-#define OMAP3430_AUTO_DES2_SHIFT			26
-#define OMAP3430_AUTO_MMC2_MASK				(1 << 25)
-#define OMAP3430_AUTO_MMC2_SHIFT			25
-#define OMAP3430_AUTO_MMC1_MASK				(1 << 24)
-#define OMAP3430_AUTO_MMC1_SHIFT			24
-#define OMAP3430_AUTO_MSPRO_MASK			(1 << 23)
-#define OMAP3430_AUTO_MSPRO_SHIFT			23
-#define OMAP3430_AUTO_HDQ_MASK				(1 << 22)
-#define OMAP3430_AUTO_HDQ_SHIFT				22
-#define OMAP3430_AUTO_MCSPI4_MASK			(1 << 21)
-#define OMAP3430_AUTO_MCSPI4_SHIFT			21
-#define OMAP3430_AUTO_MCSPI3_MASK			(1 << 20)
-#define OMAP3430_AUTO_MCSPI3_SHIFT			20
-#define OMAP3430_AUTO_MCSPI2_MASK			(1 << 19)
-#define OMAP3430_AUTO_MCSPI2_SHIFT			19
-#define OMAP3430_AUTO_MCSPI1_MASK			(1 << 18)
-#define OMAP3430_AUTO_MCSPI1_SHIFT			18
-#define OMAP3430_AUTO_I2C3_MASK				(1 << 17)
-#define OMAP3430_AUTO_I2C3_SHIFT			17
-#define OMAP3430_AUTO_I2C2_MASK				(1 << 16)
-#define OMAP3430_AUTO_I2C2_SHIFT			16
-#define OMAP3430_AUTO_I2C1_MASK				(1 << 15)
-#define OMAP3430_AUTO_I2C1_SHIFT			15
-#define OMAP3430_AUTO_UART2_MASK			(1 << 14)
-#define OMAP3430_AUTO_UART2_SHIFT			14
-#define OMAP3430_AUTO_UART1_MASK			(1 << 13)
-#define OMAP3430_AUTO_UART1_SHIFT			13
-#define OMAP3430_AUTO_GPT11_MASK			(1 << 12)
-#define OMAP3430_AUTO_GPT11_SHIFT			12
-#define OMAP3430_AUTO_GPT10_MASK			(1 << 11)
-#define OMAP3430_AUTO_GPT10_SHIFT			11
-#define OMAP3430_AUTO_MCBSP5_MASK			(1 << 10)
-#define OMAP3430_AUTO_MCBSP5_SHIFT			10
-#define OMAP3430_AUTO_MCBSP1_MASK			(1 << 9)
-#define OMAP3430_AUTO_MCBSP1_SHIFT			9
-#define OMAP3430ES1_AUTO_FAC_MASK			(1 << 8)
-#define OMAP3430ES1_AUTO_FAC_SHIFT			8
-#define OMAP3430_AUTO_MAILBOXES_MASK			(1 << 7)
-#define OMAP3430_AUTO_MAILBOXES_SHIFT			7
-#define OMAP3430_AUTO_OMAPCTRL_MASK			(1 << 6)
-#define OMAP3430_AUTO_OMAPCTRL_SHIFT			6
-#define OMAP3430ES1_AUTO_FSHOSTUSB_MASK			(1 << 5)
-#define OMAP3430ES1_AUTO_FSHOSTUSB_SHIFT		5
-#define OMAP3430_AUTO_HSOTGUSB_MASK			(1 << 4)
-#define OMAP3430_AUTO_HSOTGUSB_SHIFT			4
-#define OMAP3430ES1_AUTO_D2D_MASK			(1 << 3)
-#define OMAP3430ES1_AUTO_D2D_SHIFT			3
-#define OMAP3430_AUTO_SAD2D_MASK			(1 << 3)
-#define OMAP3430_AUTO_SAD2D_SHIFT			3
-#define OMAP3430_AUTO_SSI_MASK				(1 << 0)
-#define OMAP3430_AUTO_SSI_SHIFT				0
-
-/* CM_AUTOIDLE2_CORE */
-#define OMAP3430_AUTO_PKA_MASK				(1 << 4)
-#define OMAP3430_AUTO_PKA_SHIFT				4
-#define OMAP3430_AUTO_AES1_MASK				(1 << 3)
-#define OMAP3430_AUTO_AES1_SHIFT			3
-#define OMAP3430_AUTO_RNG_MASK				(1 << 2)
-#define OMAP3430_AUTO_RNG_SHIFT				2
-#define OMAP3430_AUTO_SHA11_MASK			(1 << 1)
-#define OMAP3430_AUTO_SHA11_SHIFT			1
-#define OMAP3430_AUTO_DES1_MASK				(1 << 0)
-#define OMAP3430_AUTO_DES1_SHIFT			0
-
-/* CM_AUTOIDLE3_CORE */
-#define	OMAP3430ES2_AUTO_USBHOST			(1 << 0)
-#define	OMAP3430ES2_AUTO_USBHOST_SHIFT			0
-#define	OMAP3430ES2_AUTO_USBTLL				(1 << 2)
-#define OMAP3430ES2_AUTO_USBTLL_SHIFT			2
-#define OMAP3430ES2_AUTO_USBTLL_MASK			(1 << 2)
-#define OMAP3430_AUTO_MAD2D_SHIFT			3
-#define OMAP3430_AUTO_MAD2D_MASK			(1 << 3)
-
-/* CM_CLKSEL_CORE */
-#define OMAP3430_CLKSEL_SSI_SHIFT			8
 #define OMAP3430_CLKSEL_SSI_MASK			(0xf << 8)
 #define OMAP3430_CLKSEL_GPT11_MASK			(1 << 7)
-#define OMAP3430_CLKSEL_GPT11_SHIFT			7
 #define OMAP3430_CLKSEL_GPT10_MASK			(1 << 6)
-#define OMAP3430_CLKSEL_GPT10_SHIFT			6
-#define OMAP3430ES1_CLKSEL_FSHOSTUSB_SHIFT		4
 #define OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK		(0x3 << 4)
 #define OMAP3430_CLKSEL_L4_SHIFT			2
-#define OMAP3430_CLKSEL_L4_MASK				(0x3 << 2)
 #define OMAP3430_CLKSEL_L4_WIDTH			2
 #define OMAP3430_CLKSEL_L3_SHIFT			0
-#define OMAP3430_CLKSEL_L3_MASK				(0x3 << 0)
 #define OMAP3430_CLKSEL_L3_WIDTH			2
-#define OMAP3630_CLKSEL_96M_SHIFT			12
 #define OMAP3630_CLKSEL_96M_MASK			(0x3 << 12)
-#define OMAP3630_CLKSEL_96M_WIDTH			2
-
-/* CM_CLKSTCTRL_CORE */
-#define OMAP3430ES1_CLKTRCTRL_D2D_SHIFT			4
 #define OMAP3430ES1_CLKTRCTRL_D2D_MASK			(0x3 << 4)
-#define OMAP3430_CLKTRCTRL_L4_SHIFT			2
 #define OMAP3430_CLKTRCTRL_L4_MASK			(0x3 << 2)
-#define OMAP3430_CLKTRCTRL_L3_SHIFT			0
 #define OMAP3430_CLKTRCTRL_L3_MASK			(0x3 << 0)
-
-/* CM_CLKSTST_CORE */
-#define OMAP3430ES1_CLKACTIVITY_D2D_SHIFT		2
-#define OMAP3430ES1_CLKACTIVITY_D2D_MASK		(1 << 2)
-#define OMAP3430_CLKACTIVITY_L4_SHIFT			1
-#define OMAP3430_CLKACTIVITY_L4_MASK			(1 << 1)
-#define OMAP3430_CLKACTIVITY_L3_SHIFT			0
-#define OMAP3430_CLKACTIVITY_L3_MASK			(1 << 0)
-
-/* CM_FCLKEN_GFX */
-#define OMAP3430ES1_EN_3D_MASK				(1 << 2)
 #define OMAP3430ES1_EN_3D_SHIFT				2
-#define OMAP3430ES1_EN_2D_MASK				(1 << 1)
 #define OMAP3430ES1_EN_2D_SHIFT				1
-
-/* CM_ICLKEN_GFX specific bits */
-
-/* CM_IDLEST_GFX specific bits */
-
-/* CM_CLKSEL_GFX specific bits */
-
-/* CM_SLEEPDEP_GFX specific bits */
-
-/* CM_CLKSTCTRL_GFX */
-#define OMAP3430ES1_CLKTRCTRL_GFX_SHIFT			0
 #define OMAP3430ES1_CLKTRCTRL_GFX_MASK			(0x3 << 0)
-
-/* CM_CLKSTST_GFX */
-#define OMAP3430ES1_CLKACTIVITY_GFX_SHIFT		0
-#define OMAP3430ES1_CLKACTIVITY_GFX_MASK		(1 << 0)
-
-/* CM_FCLKEN_SGX */
 #define OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT		1
-#define OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_MASK		(1 << 1)
-
-/* CM_IDLEST_SGX */
-#define OMAP3430ES2_ST_SGX_SHIFT			1
-#define OMAP3430ES2_ST_SGX_MASK				(1 << 1)
-
-/* CM_ICLKEN_SGX */
 #define OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT		0
-#define OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_MASK		(1 << 0)
-
-/* CM_CLKSEL_SGX */
-#define OMAP3430ES2_CLKSEL_SGX_SHIFT			0
 #define OMAP3430ES2_CLKSEL_SGX_MASK			(0x7 << 0)
-
-/* CM_CLKSTCTRL_SGX */
-#define OMAP3430ES2_CLKTRCTRL_SGX_SHIFT			0
 #define OMAP3430ES2_CLKTRCTRL_SGX_MASK			(0x3 << 0)
-
-/* CM_CLKSTST_SGX */
-#define OMAP3430ES2_CLKACTIVITY_SGX_SHIFT		0
-#define OMAP3430ES2_CLKACTIVITY_SGX_MASK		(1 << 0)
-
-/* CM_FCLKEN_WKUP specific bits */
 #define OMAP3430ES2_EN_USIMOCP_SHIFT			9
-#define OMAP3430ES2_EN_USIMOCP_MASK			(1 << 9)
-
-/* CM_ICLKEN_WKUP specific bits */
-#define OMAP3430_EN_WDT1_MASK				(1 << 4)
 #define OMAP3430_EN_WDT1_SHIFT				4
-#define OMAP3430_EN_32KSYNC_MASK			(1 << 2)
 #define OMAP3430_EN_32KSYNC_SHIFT			2
-
-/* CM_IDLEST_WKUP specific bits */
-#define OMAP3430ES2_ST_USIMOCP_SHIFT			9
-#define OMAP3430ES2_ST_USIMOCP_MASK			(1 << 9)
 #define OMAP3430_ST_WDT2_SHIFT				5
-#define OMAP3430_ST_WDT2_MASK				(1 << 5)
-#define OMAP3430_ST_WDT1_SHIFT				4
-#define OMAP3430_ST_WDT1_MASK				(1 << 4)
 #define OMAP3430_ST_32KSYNC_SHIFT			2
-#define OMAP3430_ST_32KSYNC_MASK			(1 << 2)
-
-/* CM_AUTOIDLE_WKUP */
-#define OMAP3430ES2_AUTO_USIMOCP_MASK			(1 << 9)
-#define OMAP3430ES2_AUTO_USIMOCP_SHIFT			9
-#define OMAP3430_AUTO_WDT2_MASK				(1 << 5)
-#define OMAP3430_AUTO_WDT2_SHIFT			5
-#define OMAP3430_AUTO_WDT1_MASK				(1 << 4)
-#define OMAP3430_AUTO_WDT1_SHIFT			4
-#define OMAP3430_AUTO_GPIO1_MASK			(1 << 3)
-#define OMAP3430_AUTO_GPIO1_SHIFT			3
-#define OMAP3430_AUTO_32KSYNC_MASK			(1 << 2)
-#define OMAP3430_AUTO_32KSYNC_SHIFT			2
-#define OMAP3430_AUTO_GPT12_MASK			(1 << 1)
-#define OMAP3430_AUTO_GPT12_SHIFT			1
-#define OMAP3430_AUTO_GPT1_MASK				(1 << 0)
-#define OMAP3430_AUTO_GPT1_SHIFT			0
-
-/* CM_CLKSEL_WKUP */
 #define OMAP3430ES2_CLKSEL_USIMOCP_MASK			(0xf << 3)
 #define OMAP3430_CLKSEL_RM_SHIFT			1
-#define OMAP3430_CLKSEL_RM_MASK				(0x3 << 1)
 #define OMAP3430_CLKSEL_RM_WIDTH			2
-#define OMAP3430_CLKSEL_GPT1_SHIFT			0
 #define OMAP3430_CLKSEL_GPT1_MASK			(1 << 0)
-
-/* CM_CLKEN_PLL */
 #define OMAP3430_PWRDN_EMU_PERIPH_SHIFT			31
 #define OMAP3430_PWRDN_CAM_SHIFT			30
 #define OMAP3430_PWRDN_DSS1_SHIFT			29
 #define OMAP3430_PWRDN_TV_SHIFT				28
 #define OMAP3430_PWRDN_96M_SHIFT			27
-#define OMAP3430_PERIPH_DPLL_RAMPTIME_SHIFT		24
-#define OMAP3430_PERIPH_DPLL_RAMPTIME_MASK		(0x3 << 24)
-#define OMAP3430_PERIPH_DPLL_FREQSEL_SHIFT		20
 #define OMAP3430_PERIPH_DPLL_FREQSEL_MASK		(0xf << 20)
 #define OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT	19
-#define OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_MASK		(1 << 19)
-#define OMAP3430_EN_PERIPH_DPLL_SHIFT			16
 #define OMAP3430_EN_PERIPH_DPLL_MASK			(0x7 << 16)
 #define OMAP3430_PWRDN_EMU_CORE_SHIFT			12
-#define OMAP3430_CORE_DPLL_RAMPTIME_SHIFT		8
-#define OMAP3430_CORE_DPLL_RAMPTIME_MASK		(0x3 << 8)
-#define OMAP3430_CORE_DPLL_FREQSEL_SHIFT		4
 #define OMAP3430_CORE_DPLL_FREQSEL_MASK			(0xf << 4)
 #define OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT		3
-#define OMAP3430_EN_CORE_DPLL_DRIFTGUARD_MASK		(1 << 3)
-#define OMAP3430_EN_CORE_DPLL_SHIFT			0
 #define OMAP3430_EN_CORE_DPLL_MASK			(0x7 << 0)
-
-/* CM_CLKEN2_PLL */
-#define OMAP3430ES2_EN_PERIPH2_DPLL_LPMODE_SHIFT	10
-#define OMAP3430ES2_PERIPH2_DPLL_RAMPTIME_MASK		(0x3 << 8)
-#define OMAP3430ES2_PERIPH2_DPLL_FREQSEL_SHIFT		4
 #define OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK		(0xf << 4)
 #define OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT	3
-#define OMAP3430ES2_EN_PERIPH2_DPLL_SHIFT		0
 #define OMAP3430ES2_EN_PERIPH2_DPLL_MASK		(0x7 << 0)
-
-/* CM_IDLEST_CKGEN */
-#define OMAP3430_ST_54M_CLK_MASK			(1 << 5)
-#define OMAP3430_ST_12M_CLK_MASK			(1 << 4)
-#define OMAP3430_ST_48M_CLK_MASK			(1 << 3)
-#define OMAP3430_ST_96M_CLK_MASK			(1 << 2)
-#define OMAP3430_ST_PERIPH_CLK_SHIFT			1
 #define OMAP3430_ST_PERIPH_CLK_MASK			(1 << 1)
-#define OMAP3430_ST_CORE_CLK_SHIFT			0
 #define OMAP3430_ST_CORE_CLK_MASK			(1 << 0)
-
-/* CM_IDLEST2_CKGEN */
-#define OMAP3430ES2_ST_USIM_CLK_SHIFT			2
-#define OMAP3430ES2_ST_USIM_CLK_MASK			(1 << 2)
-#define OMAP3430ES2_ST_120M_CLK_SHIFT			1
-#define OMAP3430ES2_ST_120M_CLK_MASK			(1 << 1)
-#define OMAP3430ES2_ST_PERIPH2_CLK_SHIFT		0
 #define OMAP3430ES2_ST_PERIPH2_CLK_MASK			(1 << 0)
-
-/* CM_AUTOIDLE_PLL */
-#define OMAP3430_AUTO_PERIPH_DPLL_SHIFT			3
 #define OMAP3430_AUTO_PERIPH_DPLL_MASK			(0x7 << 3)
-#define OMAP3430_AUTO_CORE_DPLL_SHIFT			0
 #define OMAP3430_AUTO_CORE_DPLL_MASK			(0x7 << 0)
-
-/* CM_AUTOIDLE2_PLL */
-#define OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT		0
 #define OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK		(0x7 << 0)
-
-/* CM_CLKSEL1_PLL */
-/* Note that OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK was (0x3 << 27) on 3430ES1 */
 #define OMAP3430_CORE_DPLL_CLKOUT_DIV_SHIFT		27
-#define OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK		(0x1f << 27)
 #define OMAP3430_CORE_DPLL_CLKOUT_DIV_WIDTH		5
-#define OMAP3430_CORE_DPLL_MULT_SHIFT			16
 #define OMAP3430_CORE_DPLL_MULT_MASK			(0x7ff << 16)
-#define OMAP3430_CORE_DPLL_DIV_SHIFT			8
 #define OMAP3430_CORE_DPLL_DIV_MASK			(0x7f << 8)
 #define OMAP3430_SOURCE_96M_SHIFT			6
-#define OMAP3430_SOURCE_96M_MASK			(1 << 6)
 #define OMAP3430_SOURCE_96M_WIDTH			1
 #define OMAP3430_SOURCE_54M_SHIFT			5
-#define OMAP3430_SOURCE_54M_MASK			(1 << 5)
 #define OMAP3430_SOURCE_54M_WIDTH			1
-#define OMAP3430_SOURCE_48M_SHIFT			3
 #define OMAP3430_SOURCE_48M_MASK			(1 << 3)
-
-/* CM_CLKSEL2_PLL */
-#define OMAP3430_PERIPH_DPLL_MULT_SHIFT			8
 #define OMAP3430_PERIPH_DPLL_MULT_MASK			(0x7ff << 8)
 #define OMAP3630_PERIPH_DPLL_MULT_MASK			(0xfff << 8)
-#define OMAP3430_PERIPH_DPLL_DIV_SHIFT			0
 #define OMAP3430_PERIPH_DPLL_DIV_MASK			(0x7f << 0)
-#define OMAP3630_PERIPH_DPLL_DCO_SEL_SHIFT		21
 #define OMAP3630_PERIPH_DPLL_DCO_SEL_MASK		(0x7 << 21)
-#define OMAP3630_PERIPH_DPLL_SD_DIV_SHIFT		24
 #define OMAP3630_PERIPH_DPLL_SD_DIV_MASK		(0xff << 24)
-
-/* CM_CLKSEL3_PLL */
 #define OMAP3430_DIV_96M_SHIFT				0
-#define OMAP3430_DIV_96M_MASK				(0x1f << 0)
-#define OMAP3430_DIV_96M_WIDTH				5
-#define OMAP3630_DIV_96M_MASK				(0x3f << 0)
 #define OMAP3630_DIV_96M_WIDTH				6
-
-/* CM_CLKSEL4_PLL */
-#define OMAP3430ES2_PERIPH2_DPLL_MULT_SHIFT		8
 #define OMAP3430ES2_PERIPH2_DPLL_MULT_MASK		(0x7ff << 8)
-#define OMAP3430ES2_PERIPH2_DPLL_DIV_SHIFT		0
 #define OMAP3430ES2_PERIPH2_DPLL_DIV_MASK		(0x7f << 0)
-
-/* CM_CLKSEL5_PLL */
 #define OMAP3430ES2_DIV_120M_SHIFT			0
-#define OMAP3430ES2_DIV_120M_MASK			(0x1f << 0)
 #define OMAP3430ES2_DIV_120M_WIDTH			5
-
-/* CM_CLKOUT_CTRL */
 #define OMAP3430_CLKOUT2_EN_SHIFT			7
-#define OMAP3430_CLKOUT2_EN_MASK			(1 << 7)
 #define OMAP3430_CLKOUT2_DIV_SHIFT			3
-#define OMAP3430_CLKOUT2_DIV_MASK			(0x7 << 3)
 #define OMAP3430_CLKOUT2_DIV_WIDTH			3
-#define OMAP3430_CLKOUT2SOURCE_SHIFT			0
 #define OMAP3430_CLKOUT2SOURCE_MASK			(0x3 << 0)
-
-/* CM_FCLKEN_DSS */
-#define OMAP3430_EN_TV_MASK				(1 << 2)
 #define OMAP3430_EN_TV_SHIFT				2
-#define OMAP3430_EN_DSS2_MASK				(1 << 1)
 #define OMAP3430_EN_DSS2_SHIFT				1
-#define OMAP3430_EN_DSS1_MASK				(1 << 0)
 #define OMAP3430_EN_DSS1_SHIFT				0
-
-/* CM_ICLKEN_DSS */
-#define OMAP3430_CM_ICLKEN_DSS_EN_DSS_MASK		(1 << 0)
 #define OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT		0
-
-/* CM_IDLEST_DSS */
 #define OMAP3430ES2_ST_DSS_IDLE_SHIFT			1
-#define OMAP3430ES2_ST_DSS_IDLE_MASK			(1 << 1)
 #define OMAP3430ES2_ST_DSS_STDBY_SHIFT			0
-#define OMAP3430ES2_ST_DSS_STDBY_MASK			(1 << 0)
 #define OMAP3430ES1_ST_DSS_SHIFT			0
-#define OMAP3430ES1_ST_DSS_MASK				(1 << 0)
-
-/* CM_AUTOIDLE_DSS */
-#define OMAP3430_AUTO_DSS_MASK				(1 << 0)
-#define OMAP3430_AUTO_DSS_SHIFT				0
-
-/* CM_CLKSEL_DSS */
 #define OMAP3430_CLKSEL_TV_SHIFT			8
-#define OMAP3430_CLKSEL_TV_MASK				(0x1f << 8)
-#define OMAP3430_CLKSEL_TV_WIDTH			5
-#define OMAP3630_CLKSEL_TV_MASK				(0x3f << 8)
 #define OMAP3630_CLKSEL_TV_WIDTH			6
 #define OMAP3430_CLKSEL_DSS1_SHIFT			0
-#define OMAP3430_CLKSEL_DSS1_MASK			(0x1f << 0)
-#define OMAP3430_CLKSEL_DSS1_WIDTH			5
-#define OMAP3630_CLKSEL_DSS1_MASK			(0x3f << 0)
 #define OMAP3630_CLKSEL_DSS1_WIDTH			6
-
-/* CM_SLEEPDEP_DSS specific bits */
-
-/* CM_CLKSTCTRL_DSS */
-#define OMAP3430_CLKTRCTRL_DSS_SHIFT			0
 #define OMAP3430_CLKTRCTRL_DSS_MASK			(0x3 << 0)
-
-/* CM_CLKSTST_DSS */
-#define OMAP3430_CLKACTIVITY_DSS_SHIFT			0
-#define OMAP3430_CLKACTIVITY_DSS_MASK			(1 << 0)
-
-/* CM_FCLKEN_CAM specific bits */
-#define OMAP3430_EN_CSI2_MASK				(1 << 1)
 #define OMAP3430_EN_CSI2_SHIFT				1
-
-/* CM_ICLKEN_CAM specific bits */
-
-/* CM_IDLEST_CAM */
-#define OMAP3430_ST_CAM_MASK				(1 << 0)
-
-/* CM_AUTOIDLE_CAM */
-#define OMAP3430_AUTO_CAM_MASK				(1 << 0)
-#define OMAP3430_AUTO_CAM_SHIFT				0
-
-/* CM_CLKSEL_CAM */
 #define OMAP3430_CLKSEL_CAM_SHIFT			0
-#define OMAP3430_CLKSEL_CAM_MASK			(0x1f << 0)
-#define OMAP3430_CLKSEL_CAM_WIDTH			5
-#define OMAP3630_CLKSEL_CAM_MASK			(0x3f << 0)
 #define OMAP3630_CLKSEL_CAM_WIDTH			6
-
-/* CM_SLEEPDEP_CAM specific bits */
-
-/* CM_CLKSTCTRL_CAM */
-#define OMAP3430_CLKTRCTRL_CAM_SHIFT			0
 #define OMAP3430_CLKTRCTRL_CAM_MASK			(0x3 << 0)
-
-/* CM_CLKSTST_CAM */
-#define OMAP3430_CLKACTIVITY_CAM_SHIFT			0
-#define OMAP3430_CLKACTIVITY_CAM_MASK			(1 << 0)
-
-/* CM_FCLKEN_PER specific bits */
-
-/* CM_ICLKEN_PER specific bits */
-
-/* CM_IDLEST_PER */
-#define OMAP3430_ST_WDT3_SHIFT				12
-#define OMAP3430_ST_WDT3_MASK				(1 << 12)
 #define OMAP3430_ST_MCBSP4_SHIFT			2
-#define OMAP3430_ST_MCBSP4_MASK				(1 << 2)
 #define OMAP3430_ST_MCBSP3_SHIFT			1
-#define OMAP3430_ST_MCBSP3_MASK				(1 << 1)
 #define OMAP3430_ST_MCBSP2_SHIFT			0
-#define OMAP3430_ST_MCBSP2_MASK				(1 << 0)
-
-/* CM_AUTOIDLE_PER */
-#define OMAP3630_AUTO_UART4_MASK			(1 << 18)
-#define OMAP3630_AUTO_UART4_SHIFT			18
-#define OMAP3430_AUTO_GPIO6_MASK			(1 << 17)
-#define OMAP3430_AUTO_GPIO6_SHIFT			17
-#define OMAP3430_AUTO_GPIO5_MASK			(1 << 16)
-#define OMAP3430_AUTO_GPIO5_SHIFT			16
-#define OMAP3430_AUTO_GPIO4_MASK			(1 << 15)
-#define OMAP3430_AUTO_GPIO4_SHIFT			15
-#define OMAP3430_AUTO_GPIO3_MASK			(1 << 14)
-#define OMAP3430_AUTO_GPIO3_SHIFT			14
-#define OMAP3430_AUTO_GPIO2_MASK			(1 << 13)
-#define OMAP3430_AUTO_GPIO2_SHIFT			13
-#define OMAP3430_AUTO_WDT3_MASK				(1 << 12)
-#define OMAP3430_AUTO_WDT3_SHIFT			12
-#define OMAP3430_AUTO_UART3_MASK			(1 << 11)
-#define OMAP3430_AUTO_UART3_SHIFT			11
-#define OMAP3430_AUTO_GPT9_MASK				(1 << 10)
-#define OMAP3430_AUTO_GPT9_SHIFT			10
-#define OMAP3430_AUTO_GPT8_MASK				(1 << 9)
-#define OMAP3430_AUTO_GPT8_SHIFT			9
-#define OMAP3430_AUTO_GPT7_MASK				(1 << 8)
-#define OMAP3430_AUTO_GPT7_SHIFT			8
-#define OMAP3430_AUTO_GPT6_MASK				(1 << 7)
-#define OMAP3430_AUTO_GPT6_SHIFT			7
-#define OMAP3430_AUTO_GPT5_MASK				(1 << 6)
-#define OMAP3430_AUTO_GPT5_SHIFT			6
-#define OMAP3430_AUTO_GPT4_MASK				(1 << 5)
-#define OMAP3430_AUTO_GPT4_SHIFT			5
-#define OMAP3430_AUTO_GPT3_MASK				(1 << 4)
-#define OMAP3430_AUTO_GPT3_SHIFT			4
-#define OMAP3430_AUTO_GPT2_MASK				(1 << 3)
-#define OMAP3430_AUTO_GPT2_SHIFT			3
-#define OMAP3430_AUTO_MCBSP4_MASK			(1 << 2)
-#define OMAP3430_AUTO_MCBSP4_SHIFT			2
-#define OMAP3430_AUTO_MCBSP3_MASK			(1 << 1)
-#define OMAP3430_AUTO_MCBSP3_SHIFT			1
-#define OMAP3430_AUTO_MCBSP2_MASK			(1 << 0)
-#define OMAP3430_AUTO_MCBSP2_SHIFT			0
-
-/* CM_CLKSEL_PER */
 #define OMAP3430_CLKSEL_GPT9_MASK			(1 << 7)
-#define OMAP3430_CLKSEL_GPT9_SHIFT			7
 #define OMAP3430_CLKSEL_GPT8_MASK			(1 << 6)
-#define OMAP3430_CLKSEL_GPT8_SHIFT			6
 #define OMAP3430_CLKSEL_GPT7_MASK			(1 << 5)
-#define OMAP3430_CLKSEL_GPT7_SHIFT			5
 #define OMAP3430_CLKSEL_GPT6_MASK			(1 << 4)
-#define OMAP3430_CLKSEL_GPT6_SHIFT			4
 #define OMAP3430_CLKSEL_GPT5_MASK			(1 << 3)
-#define OMAP3430_CLKSEL_GPT5_SHIFT			3
 #define OMAP3430_CLKSEL_GPT4_MASK			(1 << 2)
-#define OMAP3430_CLKSEL_GPT4_SHIFT			2
 #define OMAP3430_CLKSEL_GPT3_MASK			(1 << 1)
-#define OMAP3430_CLKSEL_GPT3_SHIFT			1
 #define OMAP3430_CLKSEL_GPT2_MASK			(1 << 0)
-#define OMAP3430_CLKSEL_GPT2_SHIFT			0
-
-/* CM_SLEEPDEP_PER specific bits */
-#define OMAP3430_CM_SLEEPDEP_PER_EN_IVA2_MASK		(1 << 2)
-
-/* CM_CLKSTCTRL_PER */
-#define OMAP3430_CLKTRCTRL_PER_SHIFT			0
 #define OMAP3430_CLKTRCTRL_PER_MASK			(0x3 << 0)
-
-/* CM_CLKSTST_PER */
-#define OMAP3430_CLKACTIVITY_PER_SHIFT			0
-#define OMAP3430_CLKACTIVITY_PER_MASK			(1 << 0)
-
-/* CM_CLKSEL1_EMU */
 #define OMAP3430_DIV_DPLL4_SHIFT			24
-#define OMAP3430_DIV_DPLL4_MASK				(0x1f << 24)
-#define OMAP3430_DIV_DPLL4_WIDTH			5
-#define OMAP3630_DIV_DPLL4_MASK				(0x3f << 24)
 #define OMAP3630_DIV_DPLL4_WIDTH			6
 #define OMAP3430_DIV_DPLL3_SHIFT			16
-#define OMAP3430_DIV_DPLL3_MASK				(0x1f << 16)
 #define OMAP3430_DIV_DPLL3_WIDTH			5
 #define OMAP3430_CLKSEL_TRACECLK_SHIFT			11
-#define OMAP3430_CLKSEL_TRACECLK_MASK			(0x7 << 11)
 #define OMAP3430_CLKSEL_TRACECLK_WIDTH			3
 #define OMAP3430_CLKSEL_PCLK_SHIFT			8
-#define OMAP3430_CLKSEL_PCLK_MASK			(0x7 << 8)
 #define OMAP3430_CLKSEL_PCLK_WIDTH			3
 #define OMAP3430_CLKSEL_PCLKX2_SHIFT			6
-#define OMAP3430_CLKSEL_PCLKX2_MASK			(0x3 << 6)
 #define OMAP3430_CLKSEL_PCLKX2_WIDTH			2
 #define OMAP3430_CLKSEL_ATCLK_SHIFT			4
-#define OMAP3430_CLKSEL_ATCLK_MASK			(0x3 << 4)
 #define OMAP3430_CLKSEL_ATCLK_WIDTH			2
 #define OMAP3430_TRACE_MUX_CTRL_SHIFT			2
-#define OMAP3430_TRACE_MUX_CTRL_MASK			(0x3 << 2)
 #define OMAP3430_TRACE_MUX_CTRL_WIDTH			2
-#define OMAP3430_MUX_CTRL_SHIFT				0
 #define OMAP3430_MUX_CTRL_MASK				(0x3 << 0)
-#define OMAP3430_MUX_CTRL_WIDTH				2
-
-/* CM_CLKSTCTRL_EMU */
-#define OMAP3430_CLKTRCTRL_EMU_SHIFT			0
 #define OMAP3430_CLKTRCTRL_EMU_MASK			(0x3 << 0)
-
-/* CM_CLKSTST_EMU */
-#define OMAP3430_CLKACTIVITY_EMU_SHIFT			0
-#define OMAP3430_CLKACTIVITY_EMU_MASK			(1 << 0)
-
-/* CM_CLKSEL2_EMU specific bits */
-#define OMAP3430_CORE_DPLL_EMU_MULT_SHIFT		8
-#define OMAP3430_CORE_DPLL_EMU_MULT_MASK		(0x7ff << 8)
-#define OMAP3430_CORE_DPLL_EMU_DIV_SHIFT		0
-#define OMAP3430_CORE_DPLL_EMU_DIV_MASK			(0x7f << 0)
-
-/* CM_CLKSEL3_EMU specific bits */
-#define OMAP3430_PERIPH_DPLL_EMU_MULT_SHIFT		8
-#define OMAP3430_PERIPH_DPLL_EMU_MULT_MASK		(0x7ff << 8)
-#define OMAP3430_PERIPH_DPLL_EMU_DIV_SHIFT		0
-#define OMAP3430_PERIPH_DPLL_EMU_DIV_MASK		(0x7f << 0)
-
-/* CM_POLCTRL */
-#define OMAP3430_CLKOUT2_POL_MASK			(1 << 0)
-
-/* CM_IDLEST_NEON */
-#define OMAP3430_ST_NEON_MASK				(1 << 0)
-
-/* CM_CLKSTCTRL_NEON */
-#define OMAP3430_CLKTRCTRL_NEON_SHIFT			0
 #define OMAP3430_CLKTRCTRL_NEON_MASK			(0x3 << 0)
-
-/* CM_FCLKEN_USBHOST */
 #define OMAP3430ES2_EN_USBHOST2_SHIFT			1
-#define OMAP3430ES2_EN_USBHOST2_MASK			(1 << 1)
 #define OMAP3430ES2_EN_USBHOST1_SHIFT			0
-#define OMAP3430ES2_EN_USBHOST1_MASK			(1 << 0)
-
-/* CM_ICLKEN_USBHOST */
 #define OMAP3430ES2_EN_USBHOST_SHIFT			0
-#define OMAP3430ES2_EN_USBHOST_MASK			(1 << 0)
-
-/* CM_IDLEST_USBHOST */
 #define OMAP3430ES2_ST_USBHOST_IDLE_SHIFT		1
-#define OMAP3430ES2_ST_USBHOST_IDLE_MASK		(1 << 1)
 #define OMAP3430ES2_ST_USBHOST_STDBY_SHIFT		0
-#define OMAP3430ES2_ST_USBHOST_STDBY_MASK		(1 << 0)
-
-/* CM_AUTOIDLE_USBHOST */
-#define OMAP3430ES2_AUTO_USBHOST_SHIFT			0
-#define OMAP3430ES2_AUTO_USBHOST_MASK			(1 << 0)
-
-/* CM_SLEEPDEP_USBHOST */
-#define OMAP3430ES2_EN_MPU_SHIFT			1
-#define OMAP3430ES2_EN_MPU_MASK				(1 << 1)
-#define OMAP3430ES2_EN_IVA2_SHIFT			2
-#define OMAP3430ES2_EN_IVA2_MASK			(1 << 2)
-
-/* CM_CLKSTCTRL_USBHOST */
-#define OMAP3430ES2_CLKTRCTRL_USBHOST_SHIFT		0
 #define OMAP3430ES2_CLKTRCTRL_USBHOST_MASK		(3 << 0)
-
-/* CM_CLKSTST_USBHOST */
-#define OMAP3430ES2_CLKACTIVITY_USBHOST_SHIFT		0
-#define OMAP3430ES2_CLKACTIVITY_USBHOST_MASK		(1 << 0)
-
-/*
- *
- */
-
-/* OMAP3XXX CM_CLKSTCTRL_*.CLKTRCTRL_* register bit values */
 #define OMAP34XX_CLKSTCTRL_DISABLE_AUTO		0x0
 #define OMAP34XX_CLKSTCTRL_FORCE_SLEEP		0x1
 #define OMAP34XX_CLKSTCTRL_FORCE_WAKEUP		0x2
 #define OMAP34XX_CLKSTCTRL_ENABLE_AUTO		0x3
-
-
 #endif
diff --git a/arch/arm/mach-omap2/cm-regbits-44xx.h b/arch/arm/mach-omap2/cm-regbits-44xx.h
index 4c6c2f7..4dbbd99 100644
--- a/arch/arm/mach-omap2/cm-regbits-44xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-44xx.h
@@ -22,1683 +22,125 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_44XX_H
 #define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_44XX_H
 
-/* Used by CM_L3_1_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP */
-#define OMAP4430_ABE_DYNDEP_SHIFT				3
-#define OMAP4430_ABE_DYNDEP_WIDTH				0x1
-#define OMAP4430_ABE_DYNDEP_MASK				(1 << 3)
-
-/*
- * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_L3INIT_STATICDEP,
- * CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
- */
 #define OMAP4430_ABE_STATDEP_SHIFT				3
-#define OMAP4430_ABE_STATDEP_WIDTH				0x1
-#define OMAP4430_ABE_STATDEP_MASK				(1 << 3)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_ALWONCORE_DYNDEP_SHIFT				16
-#define OMAP4430_ALWONCORE_DYNDEP_WIDTH				0x1
-#define OMAP4430_ALWONCORE_DYNDEP_MASK				(1 << 16)
-
-/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */
-#define OMAP4430_ALWONCORE_STATDEP_SHIFT			16
-#define OMAP4430_ALWONCORE_STATDEP_WIDTH			0x1
-#define OMAP4430_ALWONCORE_STATDEP_MASK				(1 << 16)
-
-/*
- * Used by CM_AUTOIDLE_DPLL_ABE, CM_AUTOIDLE_DPLL_CORE,
- * CM_AUTOIDLE_DPLL_DDRPHY, CM_AUTOIDLE_DPLL_IVA, CM_AUTOIDLE_DPLL_MPU,
- * CM_AUTOIDLE_DPLL_PER, CM_AUTOIDLE_DPLL_UNIPRO, CM_AUTOIDLE_DPLL_USB
- */
-#define OMAP4430_AUTO_DPLL_MODE_SHIFT				0
-#define OMAP4430_AUTO_DPLL_MODE_WIDTH				0x3
 #define OMAP4430_AUTO_DPLL_MODE_MASK				(0x7 << 0)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_CEFUSE_DYNDEP_SHIFT				17
-#define OMAP4430_CEFUSE_DYNDEP_WIDTH				0x1
-#define OMAP4430_CEFUSE_DYNDEP_MASK				(1 << 17)
-
-/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */
-#define OMAP4430_CEFUSE_STATDEP_SHIFT				17
-#define OMAP4430_CEFUSE_STATDEP_WIDTH				0x1
-#define OMAP4430_CEFUSE_STATDEP_MASK				(1 << 17)
-
-/* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_SHIFT		13
-#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_MASK			(1 << 13)
-
-/* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_SHIFT		12
-#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_MASK		(1 << 12)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_SHIFT			9
-#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_MASK			(1 << 9)
-
-/* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_SHIFT			11
-#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_MASK			(1 << 11)
-
-/* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_MASK			(1 << 8)
-
-/* Used by CM_MEMIF_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_SHIFT		11
-#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_MASK			(1 << 11)
-
-/* Used by CM_MEMIF_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_SHIFT		12
-#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_MASK		(1 << 12)
-
-/* Used by CM_MEMIF_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_SHIFT		13
-#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_MASK		(1 << 13)
-
-/* Used by CM_CAM_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_MASK		(1 << 9)
-
-/* Used by CM_ALWON_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_CORE_ALWON_32K_GFCLK_SHIFT		12
-#define OMAP4430_CLKACTIVITY_CORE_ALWON_32K_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_CORE_ALWON_32K_GFCLK_MASK		(1 << 12)
-
-/* Used by CM_EMU_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_MASK		(1 << 9)
-
-/* Used by CM_L4CFG_CLKSTCTRL */
-#define OMAP4460_CLKACTIVITY_CORE_TS_GFCLK_SHIFT		9
-#define OMAP4460_CLKACTIVITY_CORE_TS_GFCLK_WIDTH		0x1
-#define OMAP4460_CLKACTIVITY_CORE_TS_GFCLK_MASK			(1 << 9)
-
-/* Used by CM_CEFUSE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK		(1 << 9)
-
-/* Used by CM_MEMIF_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DLL_CLK_SHIFT			9
-#define OMAP4430_CLKACTIVITY_DLL_CLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_DLL_CLK_MASK			(1 << 9)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_SHIFT			9
-#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_MASK			(1 << 9)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_SHIFT			10
-#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_MASK			(1 << 10)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_SHIFT			11
-#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_MASK			(1 << 11)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_SHIFT			12
-#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_MASK			(1 << 12)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_SHIFT			13
-#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_MASK			(1 << 13)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_SHIFT			14
-#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_MASK			(1 << 14)
-
-/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_SHIFT		10
-#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_MASK		(1 << 10)
-
-/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DSS_FCLK_SHIFT			9
-#define OMAP4430_CLKACTIVITY_DSS_FCLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_DSS_FCLK_MASK			(1 << 9)
-
-/* Used by CM_DUCATI_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_MASK			(1 << 8)
-
-/* Used by CM_EMU_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_MASK			(1 << 8)
-
-/* Used by CM_CAM_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_SHIFT			10
-#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_MASK			(1 << 10)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_SHIFT		15
-#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_MASK		(1 << 15)
-
-/* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_SHIFT		10
-#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_MASK		(1 << 10)
-
-/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_SHIFT		11
-#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_MASK		(1 << 11)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_SHIFT		20
-#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_MASK		(1 << 20)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_SHIFT		26
-#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_MASK			(1 << 26)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_SHIFT		21
-#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_MASK		(1 << 21)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_SHIFT		27
-#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_MASK			(1 << 27)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_SHIFT		13
-#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_MASK		(1 << 13)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_SHIFT		12
-#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_MASK		(1 << 12)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_SHIFT		28
-#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_MASK		(1 << 28)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_SHIFT		29
-#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_MASK		(1 << 29)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_SHIFT		11
-#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_MASK		(1 << 11)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_SHIFT		16
-#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_MASK		(1 << 16)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_SHIFT		17
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_MASK		(1 << 17)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_SHIFT		18
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_MASK		(1 << 18)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_SHIFT		19
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_MASK		(1 << 19)
-
-/* Used by CM_CAM_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ISS_GCLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_ISS_GCLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_ISS_GCLK_MASK			(1 << 8)
-
-/* Used by CM_IVAHD_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_MASK		(1 << 8)
-
-/* Used by CM_D2D_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3X2_D2D_GICLK_SHIFT		10
-#define OMAP4430_CLKACTIVITY_L3X2_D2D_GICLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_L3X2_D2D_GICLK_MASK		(1 << 10)
-
-/* Used by CM_L3_1_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_1_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L3_1_GICLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_L3_1_GICLK_MASK			(1 << 8)
-
-/* Used by CM_L3_2_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_2_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L3_2_GICLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_L3_2_GICLK_MASK			(1 << 8)
-
-/* Used by CM_D2D_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_MASK			(1 << 8)
-
-/* Used by CM_SDMA_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_MASK			(1 << 8)
-
-/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_MASK			(1 << 8)
-
-/* Used by CM_MEMIF_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_MASK			(1 << 8)
-
-/* Used by CM_GFX_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_MASK			(1 << 8)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_MASK			(1 << 8)
-
-/* Used by CM_L3INSTR_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_MASK		(1 << 8)
-
-/* Used by CM_L4SEC_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_MASK		(1 << 8)
-
-/* Used by CM_ALWON_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_MASK			(1 << 8)
-
-/* Used by CM_CEFUSE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_MASK		(1 << 8)
-
-/* Used by CM_L4CFG_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_MASK			(1 << 8)
-
-/* Used by CM_D2D_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_SHIFT			9
-#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_MASK			(1 << 9)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_MASK			(1 << 9)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_MASK			(1 << 8)
-
-/* Used by CM_L4SEC_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_MASK		(1 << 9)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_SHIFT		12
-#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_MASK			(1 << 12)
-
-/* Used by CM_MPU_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_MASK			(1 << 8)
-
-/* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_MASK			(1 << 9)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_SHIFT		16
-#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_MASK		(1 << 16)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_SHIFT		17
-#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_MASK			(1 << 17)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_SHIFT		18
-#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_MASK			(1 << 18)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_SHIFT		19
-#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_MASK			(1 << 19)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_SHIFT		25
-#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_MASK		(1 << 25)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_SHIFT		20
-#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_MASK		(1 << 20)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_SHIFT		21
-#define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_MASK		(1 << 21)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_SHIFT		22
-#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_MASK		(1 << 22)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_SHIFT		24
-#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_MASK			(1 << 24)
-
-/* Used by CM_MEMIF_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_SHIFT			10
-#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_MASK			(1 << 10)
-
-/* Used by CM_GFX_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_SGX_GFCLK_SHIFT			9
-#define OMAP4430_CLKACTIVITY_SGX_GFCLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_SGX_GFCLK_MASK			(1 << 9)
-
-/* Used by CM_ALWON_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_SHIFT		11
-#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_MASK		(1 << 11)
-
-/* Used by CM_ALWON_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_SHIFT		10
-#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_MASK			(1 << 10)
-
-/* Used by CM_ALWON_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_MASK			(1 << 9)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_SYS_CLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_SYS_CLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_SYS_CLK_MASK			(1 << 8)
-
-/* Used by CM_TESLA_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_MASK		(1 << 8)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_SHIFT		22
-#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_MASK			(1 << 22)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_SHIFT		23
-#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_MASK			(1 << 23)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_SHIFT		24
-#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_MASK			(1 << 24)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_UNIPRO_DPLL_CLK_SHIFT		10
-#define OMAP4430_CLKACTIVITY_UNIPRO_DPLL_CLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_UNIPRO_DPLL_CLK_MASK		(1 << 10)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_USB_DPLL_CLK_SHIFT			14
-#define OMAP4430_CLKACTIVITY_USB_DPLL_CLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_USB_DPLL_CLK_MASK			(1 << 14)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_SHIFT		15
-#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_MASK		(1 << 15)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_USIM_GFCLK_SHIFT			10
-#define OMAP4430_CLKACTIVITY_USIM_GFCLK_WIDTH			0x1
-#define OMAP4430_CLKACTIVITY_USIM_GFCLK_MASK			(1 << 10)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_SHIFT		30
-#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_MASK			(1 << 30)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_SHIFT		25
-#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_MASK		(1 << 25)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_SHIFT		11
-#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_WIDTH		0x1
-#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_MASK		(1 << 11)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4460_CLKACTIVITY_WKUP_TS_GFCLK_SHIFT		13
-#define OMAP4460_CLKACTIVITY_WKUP_TS_GFCLK_WIDTH		0x1
-#define OMAP4460_CLKACTIVITY_WKUP_TS_GFCLK_MASK			(1 << 13)
-
-/*
- * Used by CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL,
- * CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL,
- * CM_L3INIT_MMC2_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL,
- * CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL,
- * CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL,
- * CM_L4PER_DMTIMER9_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL
- */
 #define OMAP4430_CLKSEL_SHIFT					24
 #define OMAP4430_CLKSEL_WIDTH					0x1
 #define OMAP4430_CLKSEL_MASK					(1 << 24)
-
-/*
- * Renamed from CLKSEL Used by CM_ABE_DSS_SYS_CLKSEL, CM_ABE_PLL_REF_CLKSEL,
- * CM_CLKSEL_DUCATI_ISS_ROOT, CM_CLKSEL_USB_60MHZ, CM_L4_WKUP_CLKSEL
- */
 #define OMAP4430_CLKSEL_0_0_SHIFT				0
 #define OMAP4430_CLKSEL_0_0_WIDTH				0x1
-#define OMAP4430_CLKSEL_0_0_MASK				(1 << 0)
-
-/* Renamed from CLKSEL Used by CM_BYPCLK_DPLL_IVA, CM_BYPCLK_DPLL_MPU */
 #define OMAP4430_CLKSEL_0_1_SHIFT				0
 #define OMAP4430_CLKSEL_0_1_WIDTH				0x2
-#define OMAP4430_CLKSEL_0_1_MASK				(0x3 << 0)
-
-/* Renamed from CLKSEL Used by CM_L3INIT_HSI_CLKCTRL */
 #define OMAP4430_CLKSEL_24_25_SHIFT				24
 #define OMAP4430_CLKSEL_24_25_WIDTH				0x2
-#define OMAP4430_CLKSEL_24_25_MASK				(0x3 << 24)
-
-/* Used by CM_L3INIT_USB_OTG_CLKCTRL */
 #define OMAP4430_CLKSEL_60M_SHIFT				24
 #define OMAP4430_CLKSEL_60M_WIDTH				0x1
-#define OMAP4430_CLKSEL_60M_MASK				(1 << 24)
-
-/* Used by CM_MPU_MPU_CLKCTRL */
-#define OMAP4460_CLKSEL_ABE_DIV_MODE_SHIFT			25
-#define OMAP4460_CLKSEL_ABE_DIV_MODE_WIDTH			0x1
-#define OMAP4460_CLKSEL_ABE_DIV_MODE_MASK			(1 << 25)
-
-/* Used by CM1_ABE_AESS_CLKCTRL */
 #define OMAP4430_CLKSEL_AESS_FCLK_SHIFT				24
 #define OMAP4430_CLKSEL_AESS_FCLK_WIDTH				0x1
-#define OMAP4430_CLKSEL_AESS_FCLK_MASK				(1 << 24)
-
-/* Used by CM_CLKSEL_CORE */
 #define OMAP4430_CLKSEL_CORE_SHIFT				0
 #define OMAP4430_CLKSEL_CORE_WIDTH				0x1
-#define OMAP4430_CLKSEL_CORE_MASK				(1 << 0)
-
-/* Renamed from CLKSEL_CORE Used by CM_SHADOW_FREQ_CONFIG2 */
-#define OMAP4430_CLKSEL_CORE_1_1_SHIFT				1
-#define OMAP4430_CLKSEL_CORE_1_1_WIDTH				0x1
-#define OMAP4430_CLKSEL_CORE_1_1_MASK				(1 << 1)
-
-/* Used by CM_WKUP_USIM_CLKCTRL */
 #define OMAP4430_CLKSEL_DIV_SHIFT				24
 #define OMAP4430_CLKSEL_DIV_WIDTH				0x1
-#define OMAP4430_CLKSEL_DIV_MASK				(1 << 24)
-
-/* Used by CM_MPU_MPU_CLKCTRL */
-#define OMAP4460_CLKSEL_EMIF_DIV_MODE_SHIFT			24
-#define OMAP4460_CLKSEL_EMIF_DIV_MODE_WIDTH			0x1
-#define OMAP4460_CLKSEL_EMIF_DIV_MODE_MASK			(1 << 24)
-
-/* Used by CM_CAM_FDIF_CLKCTRL */
 #define OMAP4430_CLKSEL_FCLK_SHIFT				24
 #define OMAP4430_CLKSEL_FCLK_WIDTH				0x2
-#define OMAP4430_CLKSEL_FCLK_MASK				(0x3 << 24)
-
-/* Used by CM_L4PER_MCBSP4_CLKCTRL */
 #define OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT			25
 #define OMAP4430_CLKSEL_INTERNAL_SOURCE_WIDTH			0x1
-#define OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK			(1 << 25)
-
-/*
- * Renamed from CLKSEL_INTERNAL_SOURCE Used by CM1_ABE_DMIC_CLKCTRL,
- * CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL,
- * CM1_ABE_MCBSP3_CLKCTRL
- */
-#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_SHIFT	26
-#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_WIDTH	0x2
-#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_MASK	(0x3 << 26)
-
-/* Used by CM_CLKSEL_CORE */
 #define OMAP4430_CLKSEL_L3_SHIFT				4
 #define OMAP4430_CLKSEL_L3_WIDTH				0x1
-#define OMAP4430_CLKSEL_L3_MASK					(1 << 4)
-
-/* Renamed from CLKSEL_L3 Used by CM_SHADOW_FREQ_CONFIG2 */
-#define OMAP4430_CLKSEL_L3_SHADOW_SHIFT				2
-#define OMAP4430_CLKSEL_L3_SHADOW_WIDTH				0x1
-#define OMAP4430_CLKSEL_L3_SHADOW_MASK				(1 << 2)
-
-/* Used by CM_CLKSEL_CORE */
 #define OMAP4430_CLKSEL_L4_SHIFT				8
 #define OMAP4430_CLKSEL_L4_WIDTH				0x1
-#define OMAP4430_CLKSEL_L4_MASK					(1 << 8)
-
-/* Used by CM_CLKSEL_ABE */
 #define OMAP4430_CLKSEL_OPP_SHIFT				0
 #define OMAP4430_CLKSEL_OPP_WIDTH				0x2
-#define OMAP4430_CLKSEL_OPP_MASK				(0x3 << 0)
-
-/* Used by CM_EMU_DEBUGSS_CLKCTRL */
 #define OMAP4430_CLKSEL_PMD_STM_CLK_SHIFT			27
 #define OMAP4430_CLKSEL_PMD_STM_CLK_WIDTH			0x3
-#define OMAP4430_CLKSEL_PMD_STM_CLK_MASK			(0x7 << 27)
-
-/* Used by CM_EMU_DEBUGSS_CLKCTRL */
-#define OMAP4430_CLKSEL_PMD_TRACE_CLK_SHIFT			24
-#define OMAP4430_CLKSEL_PMD_TRACE_CLK_WIDTH			0x3
 #define OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK			(0x7 << 24)
-
-/* Used by CM_GFX_GFX_CLKCTRL */
-#define OMAP4430_CLKSEL_SGX_FCLK_SHIFT				24
-#define OMAP4430_CLKSEL_SGX_FCLK_WIDTH				0x1
 #define OMAP4430_CLKSEL_SGX_FCLK_MASK				(1 << 24)
-
-/*
- * Used by CM1_ABE_DMIC_CLKCTRL, CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL,
- * CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL
- */
-#define OMAP4430_CLKSEL_SOURCE_SHIFT				24
-#define OMAP4430_CLKSEL_SOURCE_WIDTH				0x2
 #define OMAP4430_CLKSEL_SOURCE_MASK				(0x3 << 24)
-
-/* Renamed from CLKSEL_SOURCE Used by CM_L4PER_MCBSP4_CLKCTRL */
-#define OMAP4430_CLKSEL_SOURCE_24_24_SHIFT			24
-#define OMAP4430_CLKSEL_SOURCE_24_24_WIDTH			0x1
 #define OMAP4430_CLKSEL_SOURCE_24_24_MASK			(1 << 24)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_CLKSEL_UTMI_P1_SHIFT				24
 #define OMAP4430_CLKSEL_UTMI_P1_WIDTH				0x1
-#define OMAP4430_CLKSEL_UTMI_P1_MASK				(1 << 24)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_CLKSEL_UTMI_P2_SHIFT				25
 #define OMAP4430_CLKSEL_UTMI_P2_WIDTH				0x1
-#define OMAP4430_CLKSEL_UTMI_P2_MASK				(1 << 25)
-
-/*
- * Used by CM1_ABE_CLKSTCTRL, CM_ALWON_CLKSTCTRL, CM_CAM_CLKSTCTRL,
- * CM_CEFUSE_CLKSTCTRL, CM_D2D_CLKSTCTRL, CM_DSS_CLKSTCTRL,
- * CM_DUCATI_CLKSTCTRL, CM_EMU_CLKSTCTRL, CM_GFX_CLKSTCTRL, CM_IVAHD_CLKSTCTRL,
- * CM_L3INIT_CLKSTCTRL, CM_L3INSTR_CLKSTCTRL, CM_L3_1_CLKSTCTRL,
- * CM_L3_2_CLKSTCTRL, CM_L4CFG_CLKSTCTRL, CM_L4PER_CLKSTCTRL,
- * CM_L4SEC_CLKSTCTRL, CM_MEMIF_CLKSTCTRL, CM_MPU_CLKSTCTRL, CM_SDMA_CLKSTCTRL,
- * CM_TESLA_CLKSTCTRL, CM_WKUP_CLKSTCTRL
- */
 #define OMAP4430_CLKTRCTRL_SHIFT				0
-#define OMAP4430_CLKTRCTRL_WIDTH				0x2
 #define OMAP4430_CLKTRCTRL_MASK					(0x3 << 0)
-
-/* Used by CM_EMU_OVERRIDE_DPLL_CORE */
-#define OMAP4430_CORE_DPLL_EMU_DIV_SHIFT			0
-#define OMAP4430_CORE_DPLL_EMU_DIV_WIDTH			0x7
-#define OMAP4430_CORE_DPLL_EMU_DIV_MASK				(0x7f << 0)
-
-/* Used by CM_EMU_OVERRIDE_DPLL_CORE */
-#define OMAP4430_CORE_DPLL_EMU_MULT_SHIFT			8
-#define OMAP4430_CORE_DPLL_EMU_MULT_WIDTH			0xb
-#define OMAP4430_CORE_DPLL_EMU_MULT_MASK			(0x7ff << 8)
-
-/* Used by REVISION_CM1, REVISION_CM2 */
-#define OMAP4430_CUSTOM_SHIFT					6
-#define OMAP4430_CUSTOM_WIDTH					0x2
-#define OMAP4430_CUSTOM_MASK					(0x3 << 6)
-
-/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_D2D_DYNDEP_SHIFT				18
-#define OMAP4430_D2D_DYNDEP_WIDTH				0x1
-#define OMAP4430_D2D_DYNDEP_MASK				(1 << 18)
-
-/* Used by CM_MPU_STATICDEP */
-#define OMAP4430_D2D_STATDEP_SHIFT				18
-#define OMAP4430_D2D_STATDEP_WIDTH				0x1
-#define OMAP4430_D2D_STATDEP_MASK				(1 << 18)
-
-/* Used by CM_CLKSEL_DPLL_MPU */
-#define OMAP4460_DCC_COUNT_MAX_SHIFT				24
-#define OMAP4460_DCC_COUNT_MAX_WIDTH				0x8
-#define OMAP4460_DCC_COUNT_MAX_MASK				(0xff << 24)
-
-/* Used by CM_CLKSEL_DPLL_MPU */
-#define OMAP4460_DCC_EN_SHIFT					22
-#define OMAP4460_DCC_EN_MASK					(1 << 22)
-
-/*
- * Used by CM_SSC_DELTAMSTEP_DPLL_ABE, CM_SSC_DELTAMSTEP_DPLL_CORE,
- * CM_SSC_DELTAMSTEP_DPLL_DDRPHY, CM_SSC_DELTAMSTEP_DPLL_IVA,
- * CM_SSC_DELTAMSTEP_DPLL_MPU, CM_SSC_DELTAMSTEP_DPLL_PER,
- * CM_SSC_DELTAMSTEP_DPLL_UNIPRO, CM_SSC_DELTAMSTEP_DPLL_USB
- */
-#define OMAP4430_DELTAMSTEP_SHIFT				0
-#define OMAP4430_DELTAMSTEP_WIDTH				0x14
-#define OMAP4430_DELTAMSTEP_MASK				(0xfffff << 0)
-
-/* Renamed from DELTAMSTEP Used by CM_SSC_DELTAMSTEP_DPLL_USB */
-#define OMAP4460_DELTAMSTEP_0_20_SHIFT				0
-#define OMAP4460_DELTAMSTEP_0_20_WIDTH				0x15
-#define OMAP4460_DELTAMSTEP_0_20_MASK				(0x1fffff << 0)
-
-/* Used by CM_DLL_CTRL */
-#define OMAP4430_DLL_OVERRIDE_SHIFT				0
-#define OMAP4430_DLL_OVERRIDE_WIDTH				0x1
-#define OMAP4430_DLL_OVERRIDE_MASK				(1 << 0)
-
-/* Renamed from DLL_OVERRIDE Used by CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_DLL_OVERRIDE_2_2_SHIFT				2
-#define OMAP4430_DLL_OVERRIDE_2_2_WIDTH				0x1
-#define OMAP4430_DLL_OVERRIDE_2_2_MASK				(1 << 2)
-
-/* Used by CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_DLL_RESET_SHIFT				3
-#define OMAP4430_DLL_RESET_WIDTH				0x1
-#define OMAP4430_DLL_RESET_MASK					(1 << 3)
-
-/*
- * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDRPHY,
- * CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER,
- * CM_CLKSEL_DPLL_UNIPRO, CM_CLKSEL_DPLL_USB
- */
 #define OMAP4430_DPLL_BYP_CLKSEL_SHIFT				23
 #define OMAP4430_DPLL_BYP_CLKSEL_WIDTH				0x1
-#define OMAP4430_DPLL_BYP_CLKSEL_MASK				(1 << 23)
-
-/* Used by CM_CLKDCOLDO_DPLL_USB */
-#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT			8
-#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_WIDTH			0x1
-#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_MASK			(1 << 8)
-
-/* Used by CM_CLKSEL_DPLL_CORE */
-#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_SHIFT			20
-#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_WIDTH			0x1
-#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_MASK			(1 << 20)
-
-/* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */
-#define OMAP4430_DPLL_CLKOUTHIF_DIV_SHIFT			0
-#define OMAP4430_DPLL_CLKOUTHIF_DIV_WIDTH			0x5
 #define OMAP4430_DPLL_CLKOUTHIF_DIV_MASK			(0x1f << 0)
-
-/* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */
-#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_SHIFT			5
-#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_WIDTH			0x1
-#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_MASK			(1 << 5)
-
-/* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */
 #define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT			8
-#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_WIDTH			0x1
-#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_MASK			(1 << 8)
-
-/* Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO */
-#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_SHIFT			10
-#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_WIDTH			0x1
 #define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK			(1 << 10)
-
-/*
- * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY,
- * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO
- */
 #define OMAP4430_DPLL_CLKOUT_DIV_SHIFT				0
 #define OMAP4430_DPLL_CLKOUT_DIV_WIDTH				0x5
 #define OMAP4430_DPLL_CLKOUT_DIV_MASK				(0x1f << 0)
-
-/* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_USB */
-#define OMAP4430_DPLL_CLKOUT_DIV_0_6_SHIFT			0
-#define OMAP4430_DPLL_CLKOUT_DIV_0_6_WIDTH			0x7
 #define OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK			(0x7f << 0)
-
-/*
- * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY,
- * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO
- */
-#define OMAP4430_DPLL_CLKOUT_DIVCHACK_SHIFT			5
-#define OMAP4430_DPLL_CLKOUT_DIVCHACK_WIDTH			0x1
-#define OMAP4430_DPLL_CLKOUT_DIVCHACK_MASK			(1 << 5)
-
-/* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_USB */
-#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_SHIFT		7
-#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_WIDTH		0x1
-#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_MASK		(1 << 7)
-
-/*
- * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY,
- * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB
- */
-#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_SHIFT			8
-#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_WIDTH			0x1
 #define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK			(1 << 8)
-
-/* Used by CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_DPLL_CORE_DPLL_EN_SHIFT			8
-#define OMAP4430_DPLL_CORE_DPLL_EN_WIDTH			0x3
-#define OMAP4430_DPLL_CORE_DPLL_EN_MASK				(0x7 << 8)
-
-/* Used by CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_DPLL_CORE_M2_DIV_SHIFT				11
-#define OMAP4430_DPLL_CORE_M2_DIV_WIDTH				0x5
-#define OMAP4430_DPLL_CORE_M2_DIV_MASK				(0x1f << 11)
-
-/* Used by CM_SHADOW_FREQ_CONFIG2 */
-#define OMAP4430_DPLL_CORE_M5_DIV_SHIFT				3
-#define OMAP4430_DPLL_CORE_M5_DIV_WIDTH				0x5
-#define OMAP4430_DPLL_CORE_M5_DIV_MASK				(0x1f << 3)
-
-/*
- * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDRPHY,
- * CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER,
- * CM_CLKSEL_DPLL_UNIPRO
- */
-#define OMAP4430_DPLL_DIV_SHIFT					0
-#define OMAP4430_DPLL_DIV_WIDTH					0x7
 #define OMAP4430_DPLL_DIV_MASK					(0x7f << 0)
-
-/* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_USB */
-#define OMAP4430_DPLL_DIV_0_7_SHIFT				0
-#define OMAP4430_DPLL_DIV_0_7_WIDTH				0x8
 #define OMAP4430_DPLL_DIV_0_7_MASK				(0xff << 0)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY,
- * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
- */
-#define OMAP4430_DPLL_DRIFTGUARD_EN_SHIFT			8
-#define OMAP4430_DPLL_DRIFTGUARD_EN_WIDTH			0x1
-#define OMAP4430_DPLL_DRIFTGUARD_EN_MASK			(1 << 8)
-
-/* Renamed from DPLL_DRIFTGUARD_EN Used by CM_CLKMODE_DPLL_UNIPRO */
-#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_SHIFT			3
-#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_WIDTH			0x1
-#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_MASK			(1 << 3)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY,
- * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER,
- * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB
- */
-#define OMAP4430_DPLL_EN_SHIFT					0
-#define OMAP4430_DPLL_EN_WIDTH					0x3
 #define OMAP4430_DPLL_EN_MASK					(0x7 << 0)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY,
- * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER,
- * CM_CLKMODE_DPLL_UNIPRO
- */
-#define OMAP4430_DPLL_LPMODE_EN_SHIFT				10
-#define OMAP4430_DPLL_LPMODE_EN_WIDTH				0x1
 #define OMAP4430_DPLL_LPMODE_EN_MASK				(1 << 10)
-
-/*
- * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDRPHY,
- * CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER,
- * CM_CLKSEL_DPLL_UNIPRO
- */
-#define OMAP4430_DPLL_MULT_SHIFT				8
-#define OMAP4430_DPLL_MULT_WIDTH				0xb
 #define OMAP4430_DPLL_MULT_MASK					(0x7ff << 8)
-
-/* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_USB */
-#define OMAP4430_DPLL_MULT_USB_SHIFT				8
-#define OMAP4430_DPLL_MULT_USB_WIDTH				0xc
 #define OMAP4430_DPLL_MULT_USB_MASK				(0xfff << 8)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY,
- * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER,
- * CM_CLKMODE_DPLL_UNIPRO
- */
-#define OMAP4430_DPLL_REGM4XEN_SHIFT				11
-#define OMAP4430_DPLL_REGM4XEN_WIDTH				0x1
 #define OMAP4430_DPLL_REGM4XEN_MASK				(1 << 11)
-
-/* Used by CM_CLKSEL_DPLL_USB */
-#define OMAP4430_DPLL_SD_DIV_SHIFT				24
-#define OMAP4430_DPLL_SD_DIV_WIDTH				0x8
 #define OMAP4430_DPLL_SD_DIV_MASK				(0xff << 24)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY,
- * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER,
- * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB
- */
-#define OMAP4430_DPLL_SSC_ACK_SHIFT				13
-#define OMAP4430_DPLL_SSC_ACK_WIDTH				0x1
-#define OMAP4430_DPLL_SSC_ACK_MASK				(1 << 13)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY,
- * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER,
- * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB
- */
-#define OMAP4430_DPLL_SSC_DOWNSPREAD_SHIFT			14
-#define OMAP4430_DPLL_SSC_DOWNSPREAD_WIDTH			0x1
-#define OMAP4430_DPLL_SSC_DOWNSPREAD_MASK			(1 << 14)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY,
- * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER,
- * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB
- */
-#define OMAP4430_DPLL_SSC_EN_SHIFT				12
-#define OMAP4430_DPLL_SSC_EN_WIDTH				0x1
-#define OMAP4430_DPLL_SSC_EN_MASK				(1 << 12)
-
-/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
-#define OMAP4430_DSS_DYNDEP_SHIFT				8
-#define OMAP4430_DSS_DYNDEP_WIDTH				0x1
-#define OMAP4430_DSS_DYNDEP_MASK				(1 << 8)
-
-/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP */
 #define OMAP4430_DSS_STATDEP_SHIFT				8
-#define OMAP4430_DSS_STATDEP_WIDTH				0x1
-#define OMAP4430_DSS_STATDEP_MASK				(1 << 8)
-
-/* Used by CM_L3_2_DYNAMICDEP */
-#define OMAP4430_DUCATI_DYNDEP_SHIFT				0
-#define OMAP4430_DUCATI_DYNDEP_WIDTH				0x1
-#define OMAP4430_DUCATI_DYNDEP_MASK				(1 << 0)
-
-/* Used by CM_MPU_STATICDEP, CM_SDMA_STATICDEP */
 #define OMAP4430_DUCATI_STATDEP_SHIFT				0
-#define OMAP4430_DUCATI_STATDEP_WIDTH				0x1
-#define OMAP4430_DUCATI_STATDEP_MASK				(1 << 0)
-
-/* Used by CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_FREQ_UPDATE_SHIFT				0
-#define OMAP4430_FREQ_UPDATE_WIDTH				0x1
-#define OMAP4430_FREQ_UPDATE_MASK				(1 << 0)
-
-/* Used by REVISION_CM1, REVISION_CM2 */
-#define OMAP4430_FUNC_SHIFT					16
-#define OMAP4430_FUNC_WIDTH					0xc
-#define OMAP4430_FUNC_MASK					(0xfff << 16)
-
-/* Used by CM_L3_2_DYNAMICDEP */
-#define OMAP4430_GFX_DYNDEP_SHIFT				10
-#define OMAP4430_GFX_DYNDEP_WIDTH				0x1
-#define OMAP4430_GFX_DYNDEP_MASK				(1 << 10)
-
-/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
 #define OMAP4430_GFX_STATDEP_SHIFT				10
-#define OMAP4430_GFX_STATDEP_WIDTH				0x1
-#define OMAP4430_GFX_STATDEP_MASK				(1 << 10)
-
-/* Used by CM_SHADOW_FREQ_CONFIG2 */
-#define OMAP4430_GPMC_FREQ_UPDATE_SHIFT				0
-#define OMAP4430_GPMC_FREQ_UPDATE_WIDTH				0x1
-#define OMAP4430_GPMC_FREQ_UPDATE_MASK				(1 << 0)
-
-/*
- * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA,
- * CM_DIV_M4_DPLL_PER
- */
-#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_SHIFT			0
-#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_WIDTH			0x5
 #define OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK			(0x1f << 0)
-
-/*
- * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA,
- * CM_DIV_M4_DPLL_PER
- */
-#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT		5
-#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_WIDTH		0x1
-#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_MASK		(1 << 5)
-
-/*
- * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA,
- * CM_DIV_M4_DPLL_PER
- */
-#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT		8
-#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_WIDTH		0x1
-#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK		(1 << 8)
-
-/*
- * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA,
- * CM_DIV_M4_DPLL_PER
- */
-#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_SHIFT			12
-#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_WIDTH			0x1
-#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_MASK			(1 << 12)
-
-/*
- * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA,
- * CM_DIV_M5_DPLL_PER
- */
-#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_SHIFT			0
-#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_WIDTH			0x5
 #define OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK			(0x1f << 0)
-
-/*
- * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA,
- * CM_DIV_M5_DPLL_PER
- */
-#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT		5
-#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_WIDTH		0x1
-#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_MASK		(1 << 5)
-
-/*
- * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA,
- * CM_DIV_M5_DPLL_PER
- */
-#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT		8
-#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_WIDTH		0x1
-#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK		(1 << 8)
-
-/*
- * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA,
- * CM_DIV_M5_DPLL_PER
- */
-#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_SHIFT			12
-#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_WIDTH			0x1
-#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_MASK			(1 << 12)
-
-/* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
-#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_SHIFT			0
-#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_WIDTH			0x5
 #define OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK			(0x1f << 0)
-
-/* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
-#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT		5
-#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_WIDTH		0x1
-#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_MASK		(1 << 5)
-
-/* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
-#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT		8
-#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_WIDTH		0x1
-#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK		(1 << 8)
-
-/* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
-#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_SHIFT			12
-#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_WIDTH			0x1
-#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_MASK			(1 << 12)
-
-/* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
-#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_SHIFT			0
-#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_WIDTH			0x5
 #define OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK			(0x1f << 0)
-
-/* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
-#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_SHIFT		5
-#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_WIDTH		0x1
-#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_MASK		(1 << 5)
-
-/* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
-#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_SHIFT		8
-#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_WIDTH		0x1
-#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_MASK		(1 << 8)
-
-/* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
-#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_SHIFT			12
-#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_WIDTH			0x1
-#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_MASK			(1 << 12)
-
-/*
- * Used by CM1_ABE_AESS_CLKCTRL, CM1_ABE_DMIC_CLKCTRL, CM1_ABE_L4ABE_CLKCTRL,
- * CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL,
- * CM1_ABE_MCBSP3_CLKCTRL, CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL,
- * CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL,
- * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_SR_CORE_CLKCTRL,
- * CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL, CM_CAM_FDIF_CLKCTRL,
- * CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL, CM_CM1_PROFILING_CLKCTRL,
- * CM_CM2_PROFILING_CLKCTRL, CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL,
- * CM_D2D_SAD2D_FW_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
- * CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL,
- * CM_IVAHD_SL2_CLKCTRL, CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL,
- * CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
- * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_FS_CLKCTRL,
- * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL,
- * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL,
- * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL,
- * CM_L3_2_L3_2_CLKCTRL, CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL,
- * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL,
- * CM_L4PER_DMTIMER10_CLKCTRL, CM_L4PER_DMTIMER11_CLKCTRL,
- * CM_L4PER_DMTIMER2_CLKCTRL, CM_L4PER_DMTIMER3_CLKCTRL,
- * CM_L4PER_DMTIMER4_CLKCTRL, CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL,
- * CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL,
- * CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL,
- * CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL,
- * CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL,
- * CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL,
- * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL,
- * CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_SLIMBUS2_CLKCTRL,
- * CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL,
- * CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL, CM_L4SEC_AES2_CLKCTRL,
- * CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL,
- * CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, CM_L4SEC_SHA2MD51_CLKCTRL,
- * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL,
- * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL,
- * CM_TESLA_TESLA_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL, CM_WKUP_KEYBOARD_CLKCTRL,
- * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SARRAM_CLKCTRL, CM_WKUP_SYNCTIMER_CLKCTRL,
- * CM_WKUP_TIMER12_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_USIM_CLKCTRL,
- * CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WDT2_CLKCTRL
- */
 #define OMAP4430_IDLEST_SHIFT					16
-#define OMAP4430_IDLEST_WIDTH					0x2
 #define OMAP4430_IDLEST_MASK					(0x3 << 16)
-
-/* Used by CM_DUCATI_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_ISS_DYNDEP_SHIFT				9
-#define OMAP4430_ISS_DYNDEP_WIDTH				0x1
-#define OMAP4430_ISS_DYNDEP_MASK				(1 << 9)
-
-/*
- * Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP,
- * CM_TESLA_STATICDEP
- */
-#define OMAP4430_ISS_STATDEP_SHIFT				9
-#define OMAP4430_ISS_STATDEP_WIDTH				0x1
-#define OMAP4430_ISS_STATDEP_MASK				(1 << 9)
-
-/* Used by CM_L3_2_DYNAMICDEP, CM_TESLA_DYNAMICDEP */
-#define OMAP4430_IVAHD_DYNDEP_SHIFT				2
-#define OMAP4430_IVAHD_DYNDEP_WIDTH				0x1
-#define OMAP4430_IVAHD_DYNDEP_MASK				(1 << 2)
-
-/*
- * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_DSS_STATICDEP,
- * CM_DUCATI_STATICDEP, CM_GFX_STATICDEP, CM_L3INIT_STATICDEP,
- * CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
- */
 #define OMAP4430_IVAHD_STATDEP_SHIFT				2
-#define OMAP4430_IVAHD_STATDEP_WIDTH				0x1
-#define OMAP4430_IVAHD_STATDEP_MASK				(1 << 2)
-
-/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
-#define OMAP4430_L3INIT_DYNDEP_SHIFT				7
-#define OMAP4430_L3INIT_DYNDEP_WIDTH				0x1
-#define OMAP4430_L3INIT_DYNDEP_MASK				(1 << 7)
-
-/*
- * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_MPU_STATICDEP,
- * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
- */
 #define OMAP4430_L3INIT_STATDEP_SHIFT				7
-#define OMAP4430_L3INIT_STATDEP_WIDTH				0x1
-#define OMAP4430_L3INIT_STATDEP_MASK				(1 << 7)
-
-/*
- * Used by CM_DSS_DYNAMICDEP, CM_L3INIT_DYNAMICDEP, CM_L3_2_DYNAMICDEP,
- * CM_L4CFG_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP
- */
-#define OMAP4430_L3_1_DYNDEP_SHIFT				5
-#define OMAP4430_L3_1_DYNDEP_WIDTH				0x1
-#define OMAP4430_L3_1_DYNDEP_MASK				(1 << 5)
-
-/*
- * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_DSS_STATICDEP,
- * CM_DUCATI_STATICDEP, CM_GFX_STATICDEP, CM_IVAHD_STATICDEP,
- * CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP, CM_MPU_STATICDEP,
- * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
- */
 #define OMAP4430_L3_1_STATDEP_SHIFT				5
-#define OMAP4430_L3_1_STATDEP_WIDTH				0x1
-#define OMAP4430_L3_1_STATDEP_MASK				(1 << 5)
-
-/*
- * Used by CM_CAM_DYNAMICDEP, CM_D2D_DYNAMICDEP, CM_DUCATI_DYNAMICDEP,
- * CM_EMU_DYNAMICDEP, CM_GFX_DYNAMICDEP, CM_IVAHD_DYNAMICDEP,
- * CM_L3INIT_DYNAMICDEP, CM_L3_1_DYNAMICDEP, CM_L4CFG_DYNAMICDEP,
- * CM_L4SEC_DYNAMICDEP, CM_SDMA_DYNAMICDEP
- */
-#define OMAP4430_L3_2_DYNDEP_SHIFT				6
-#define OMAP4430_L3_2_DYNDEP_WIDTH				0x1
-#define OMAP4430_L3_2_DYNDEP_MASK				(1 << 6)
-
-/*
- * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_DSS_STATICDEP,
- * CM_DUCATI_STATICDEP, CM_GFX_STATICDEP, CM_IVAHD_STATICDEP,
- * CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP, CM_MPU_STATICDEP,
- * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
- */
 #define OMAP4430_L3_2_STATDEP_SHIFT				6
-#define OMAP4430_L3_2_STATDEP_WIDTH				0x1
-#define OMAP4430_L3_2_STATDEP_MASK				(1 << 6)
-
-/* Used by CM_L3_1_DYNAMICDEP */
-#define OMAP4430_L4CFG_DYNDEP_SHIFT				12
-#define OMAP4430_L4CFG_DYNDEP_WIDTH				0x1
-#define OMAP4430_L4CFG_DYNDEP_MASK				(1 << 12)
-
-/*
- * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_L3INIT_STATICDEP,
- * CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
- */
 #define OMAP4430_L4CFG_STATDEP_SHIFT				12
-#define OMAP4430_L4CFG_STATDEP_WIDTH				0x1
-#define OMAP4430_L4CFG_STATDEP_MASK				(1 << 12)
-
-/* Used by CM_L3_2_DYNAMICDEP */
-#define OMAP4430_L4PER_DYNDEP_SHIFT				13
-#define OMAP4430_L4PER_DYNDEP_WIDTH				0x1
-#define OMAP4430_L4PER_DYNDEP_MASK				(1 << 13)
-
-/*
- * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_L3INIT_STATICDEP,
- * CM_L4SEC_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
- */
 #define OMAP4430_L4PER_STATDEP_SHIFT				13
-#define OMAP4430_L4PER_STATDEP_WIDTH				0x1
-#define OMAP4430_L4PER_STATDEP_MASK				(1 << 13)
-
-/* Used by CM_L3_2_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
-#define OMAP4430_L4SEC_DYNDEP_SHIFT				14
-#define OMAP4430_L4SEC_DYNDEP_WIDTH				0x1
-#define OMAP4430_L4SEC_DYNDEP_MASK				(1 << 14)
-
-/*
- * Used by CM_DUCATI_STATICDEP, CM_L3INIT_STATICDEP, CM_MPU_STATICDEP,
- * CM_SDMA_STATICDEP
- */
 #define OMAP4430_L4SEC_STATDEP_SHIFT				14
-#define OMAP4430_L4SEC_STATDEP_WIDTH				0x1
-#define OMAP4430_L4SEC_STATDEP_MASK				(1 << 14)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_L4WKUP_DYNDEP_SHIFT				15
-#define OMAP4430_L4WKUP_DYNDEP_WIDTH				0x1
-#define OMAP4430_L4WKUP_DYNDEP_MASK				(1 << 15)
-
-/*
- * Used by CM_DUCATI_STATICDEP, CM_L3INIT_STATICDEP, CM_MPU_STATICDEP,
- * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
- */
 #define OMAP4430_L4WKUP_STATDEP_SHIFT				15
-#define OMAP4430_L4WKUP_STATDEP_WIDTH				0x1
-#define OMAP4430_L4WKUP_STATDEP_MASK				(1 << 15)
-
-/*
- * Used by CM_D2D_DYNAMICDEP, CM_L3_1_DYNAMICDEP, CM_L4CFG_DYNAMICDEP,
- * CM_MPU_DYNAMICDEP
- */
-#define OMAP4430_MEMIF_DYNDEP_SHIFT				4
-#define OMAP4430_MEMIF_DYNDEP_WIDTH				0x1
-#define OMAP4430_MEMIF_DYNDEP_MASK				(1 << 4)
-
-/*
- * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_DSS_STATICDEP,
- * CM_DUCATI_STATICDEP, CM_GFX_STATICDEP, CM_IVAHD_STATICDEP,
- * CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP, CM_MPU_STATICDEP,
- * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
- */
 #define OMAP4430_MEMIF_STATDEP_SHIFT				4
-#define OMAP4430_MEMIF_STATDEP_WIDTH				0x1
-#define OMAP4430_MEMIF_STATDEP_MASK				(1 << 4)
-
-/*
- * Used by CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE,
- * CM_SSC_MODFREQDIV_DPLL_DDRPHY, CM_SSC_MODFREQDIV_DPLL_IVA,
- * CM_SSC_MODFREQDIV_DPLL_MPU, CM_SSC_MODFREQDIV_DPLL_PER,
- * CM_SSC_MODFREQDIV_DPLL_UNIPRO, CM_SSC_MODFREQDIV_DPLL_USB
- */
-#define OMAP4430_MODFREQDIV_EXPONENT_SHIFT			8
-#define OMAP4430_MODFREQDIV_EXPONENT_WIDTH			0x3
-#define OMAP4430_MODFREQDIV_EXPONENT_MASK			(0x7 << 8)
-
-/*
- * Used by CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE,
- * CM_SSC_MODFREQDIV_DPLL_DDRPHY, CM_SSC_MODFREQDIV_DPLL_IVA,
- * CM_SSC_MODFREQDIV_DPLL_MPU, CM_SSC_MODFREQDIV_DPLL_PER,
- * CM_SSC_MODFREQDIV_DPLL_UNIPRO, CM_SSC_MODFREQDIV_DPLL_USB
- */
-#define OMAP4430_MODFREQDIV_MANTISSA_SHIFT			0
-#define OMAP4430_MODFREQDIV_MANTISSA_WIDTH			0x7
-#define OMAP4430_MODFREQDIV_MANTISSA_MASK			(0x7f << 0)
-
-/*
- * Used by CM1_ABE_AESS_CLKCTRL, CM1_ABE_DMIC_CLKCTRL, CM1_ABE_L4ABE_CLKCTRL,
- * CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL,
- * CM1_ABE_MCBSP3_CLKCTRL, CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL,
- * CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL,
- * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_SR_CORE_CLKCTRL,
- * CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL, CM_CAM_FDIF_CLKCTRL,
- * CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL, CM_CM1_PROFILING_CLKCTRL,
- * CM_CM2_PROFILING_CLKCTRL, CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL,
- * CM_D2D_SAD2D_FW_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
- * CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL,
- * CM_IVAHD_SL2_CLKCTRL, CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL,
- * CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
- * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_FS_CLKCTRL,
- * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL,
- * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL,
- * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL,
- * CM_L3_2_L3_2_CLKCTRL, CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL,
- * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL,
- * CM_L4PER_DMTIMER10_CLKCTRL, CM_L4PER_DMTIMER11_CLKCTRL,
- * CM_L4PER_DMTIMER2_CLKCTRL, CM_L4PER_DMTIMER3_CLKCTRL,
- * CM_L4PER_DMTIMER4_CLKCTRL, CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL,
- * CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL,
- * CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL,
- * CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL,
- * CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL,
- * CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL,
- * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL,
- * CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_SLIMBUS2_CLKCTRL,
- * CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL,
- * CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL, CM_L4SEC_AES2_CLKCTRL,
- * CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL,
- * CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, CM_L4SEC_SHA2MD51_CLKCTRL,
- * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL,
- * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL,
- * CM_TESLA_TESLA_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL, CM_WKUP_KEYBOARD_CLKCTRL,
- * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_SARRAM_CLKCTRL, CM_WKUP_SYNCTIMER_CLKCTRL,
- * CM_WKUP_TIMER12_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_USIM_CLKCTRL,
- * CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WDT2_CLKCTRL
- */
 #define OMAP4430_MODULEMODE_SHIFT				0
-#define OMAP4430_MODULEMODE_WIDTH				0x2
 #define OMAP4430_MODULEMODE_MASK				(0x3 << 0)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4460_MPU_DYNDEP_SHIFT				19
-#define OMAP4460_MPU_DYNDEP_WIDTH				0x1
-#define OMAP4460_MPU_DYNDEP_MASK				(1 << 19)
-
-/* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT			9
-#define OMAP4430_OPTFCLKEN_48MHZ_CLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_48MHZ_CLK_MASK			(1 << 9)
-
-/* Used by CM_WKUP_BANDGAP_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_BGAP_32K_SHIFT			8
-#define OMAP4430_OPTFCLKEN_BGAP_32K_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_BGAP_32K_MASK			(1 << 8)
-
-/* Used by CM_ALWON_USBPHY_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_CLK32K_SHIFT				8
-#define OMAP4430_OPTFCLKEN_CLK32K_WIDTH				0x1
-#define OMAP4430_OPTFCLKEN_CLK32K_MASK				(1 << 8)
-
-/* Used by CM_CAM_ISS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_CTRLCLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_CTRLCLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_CTRLCLK_MASK				(1 << 8)
-
-/*
- * Used by CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL,
- * CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL,
- * CM_WKUP_GPIO1_CLKCTRL
- */
 #define OMAP4430_OPTFCLKEN_DBCLK_SHIFT				8
-#define OMAP4430_OPTFCLKEN_DBCLK_WIDTH				0x1
-#define OMAP4430_OPTFCLKEN_DBCLK_MASK				(1 << 8)
-
-/* Used by CM_MEMIF_DLL_CLKCTRL, CM_MEMIF_DLL_H_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_DLL_CLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_DLL_CLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_DLL_CLK_MASK				(1 << 8)
-
-/* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_DSSCLK_SHIFT				8
-#define OMAP4430_OPTFCLKEN_DSSCLK_WIDTH				0x1
-#define OMAP4430_OPTFCLKEN_DSSCLK_MASK				(1 << 8)
-
-/* Used by CM_WKUP_USIM_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_FCLK_SHIFT				8
-#define OMAP4430_OPTFCLKEN_FCLK_WIDTH				0x1
-#define OMAP4430_OPTFCLKEN_FCLK_MASK				(1 << 8)
-
-/* Used by CM1_ABE_SLIMBUS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_FCLK0_SHIFT				8
-#define OMAP4430_OPTFCLKEN_FCLK0_WIDTH				0x1
-#define OMAP4430_OPTFCLKEN_FCLK0_MASK				(1 << 8)
-
-/* Used by CM1_ABE_SLIMBUS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_FCLK1_SHIFT				9
-#define OMAP4430_OPTFCLKEN_FCLK1_WIDTH				0x1
-#define OMAP4430_OPTFCLKEN_FCLK1_MASK				(1 << 9)
-
-/* Used by CM1_ABE_SLIMBUS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_FCLK2_SHIFT				10
-#define OMAP4430_OPTFCLKEN_FCLK2_WIDTH				0x1
-#define OMAP4430_OPTFCLKEN_FCLK2_MASK				(1 << 10)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_FUNC48MCLK_SHIFT			15
-#define OMAP4430_OPTFCLKEN_FUNC48MCLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_FUNC48MCLK_MASK			(1 << 15)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT		13
-#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_WIDTH		0x1
-#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_MASK			(1 << 13)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT		14
-#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_WIDTH		0x1
-#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_MASK			(1 << 14)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT			11
-#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_MASK			(1 << 11)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT			12
-#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_MASK			(1 << 12)
-
-/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_MASK			(1 << 8)
-
-/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_SHIFT		9
-#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_WIDTH		0x1
-#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_MASK			(1 << 9)
-
-/* Used by CM_L3INIT_USBPHYOCP2SCP_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_PHY_48M_SHIFT			8
-#define OMAP4430_OPTFCLKEN_PHY_48M_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_PHY_48M_MASK				(1 << 8)
-
-/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_SHIFT			10
-#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_MASK			(1 << 10)
-
-/* Renamed from OPTFCLKEN_SLIMBUS_CLK Used by CM1_ABE_SLIMBUS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_SHIFT		11
-#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_WIDTH		0x1
-#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_MASK		(1 << 11)
-
-/* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT			10
-#define OMAP4430_OPTFCLKEN_SYS_CLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_SYS_CLK_MASK				(1 << 10)
-
-/* Used by CM_WKUP_BANDGAP_CLKCTRL */
 #define OMAP4460_OPTFCLKEN_TS_FCLK_SHIFT			8
-#define OMAP4460_OPTFCLKEN_TS_FCLK_WIDTH			0x1
-#define OMAP4460_OPTFCLKEN_TS_FCLK_MASK				(1 << 8)
-
-/* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_TV_CLK_SHIFT				11
-#define OMAP4430_OPTFCLKEN_TV_CLK_WIDTH				0x1
-#define OMAP4430_OPTFCLKEN_TV_CLK_MASK				(1 << 11)
-
-/* Used by CM_L3INIT_UNIPRO1_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_TXPHYCLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_TXPHYCLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_TXPHYCLK_MASK			(1 << 8)
-
-/* Used by CM_L3INIT_USB_TLL_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_USB_CH0_CLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_MASK			(1 << 8)
-
-/* Used by CM_L3INIT_USB_TLL_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_USB_CH1_CLK_SHIFT			9
-#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_MASK			(1 << 9)
-
-/* Used by CM_L3INIT_USB_TLL_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_USB_CH2_CLK_SHIFT			10
-#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_MASK			(1 << 10)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_MASK			(1 << 8)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_SHIFT			9
-#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_MASK			(1 << 9)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT			10
-#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_WIDTH			0x1
-#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_MASK			(1 << 10)
-
-/* Used by CM_L3INIT_USB_OTG_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_XCLK_SHIFT				8
-#define OMAP4430_OPTFCLKEN_XCLK_WIDTH				0x1
-#define OMAP4430_OPTFCLKEN_XCLK_MASK				(1 << 8)
-
-/* Used by CM_EMU_OVERRIDE_DPLL_CORE */
-#define OMAP4430_OVERRIDE_ENABLE_SHIFT				19
-#define OMAP4430_OVERRIDE_ENABLE_WIDTH				0x1
-#define OMAP4430_OVERRIDE_ENABLE_MASK				(1 << 19)
-
-/* Used by CM_CLKSEL_ABE */
 #define OMAP4430_PAD_CLKS_GATE_SHIFT				8
-#define OMAP4430_PAD_CLKS_GATE_WIDTH				0x1
-#define OMAP4430_PAD_CLKS_GATE_MASK				(1 << 8)
-
-/* Used by CM_CORE_DVFS_CURRENT, CM_IVA_DVFS_CURRENT */
-#define OMAP4430_PERF_CURRENT_SHIFT				0
-#define OMAP4430_PERF_CURRENT_WIDTH				0x8
-#define OMAP4430_PERF_CURRENT_MASK				(0xff << 0)
-
-/*
- * Used by CM_CORE_DVFS_PERF1, CM_CORE_DVFS_PERF2, CM_CORE_DVFS_PERF3,
- * CM_CORE_DVFS_PERF4, CM_IVA_DVFS_PERF_ABE, CM_IVA_DVFS_PERF_IVAHD,
- * CM_IVA_DVFS_PERF_TESLA
- */
-#define OMAP4430_PERF_REQ_SHIFT					0
-#define OMAP4430_PERF_REQ_WIDTH					0x8
-#define OMAP4430_PERF_REQ_MASK					(0xff << 0)
-
-/* Used by CM_RESTORE_ST */
-#define OMAP4430_PHASE1_COMPLETED_SHIFT				0
-#define OMAP4430_PHASE1_COMPLETED_WIDTH				0x1
-#define OMAP4430_PHASE1_COMPLETED_MASK				(1 << 0)
-
-/* Used by CM_RESTORE_ST */
-#define OMAP4430_PHASE2A_COMPLETED_SHIFT			1
-#define OMAP4430_PHASE2A_COMPLETED_WIDTH			0x1
-#define OMAP4430_PHASE2A_COMPLETED_MASK				(1 << 1)
-
-/* Used by CM_RESTORE_ST */
-#define OMAP4430_PHASE2B_COMPLETED_SHIFT			2
-#define OMAP4430_PHASE2B_COMPLETED_WIDTH			0x1
-#define OMAP4430_PHASE2B_COMPLETED_MASK				(1 << 2)
-
-/* Used by CM_EMU_DEBUGSS_CLKCTRL */
 #define OMAP4430_PMD_STM_MUX_CTRL_SHIFT				20
 #define OMAP4430_PMD_STM_MUX_CTRL_WIDTH				0x2
-#define OMAP4430_PMD_STM_MUX_CTRL_MASK				(0x3 << 20)
-
-/* Used by CM_EMU_DEBUGSS_CLKCTRL */
 #define OMAP4430_PMD_TRACE_MUX_CTRL_SHIFT			22
 #define OMAP4430_PMD_TRACE_MUX_CTRL_WIDTH			0x2
-#define OMAP4430_PMD_TRACE_MUX_CTRL_MASK			(0x3 << 22)
-
-/* Used by CM_DYN_DEP_PRESCAL */
-#define OMAP4430_PRESCAL_SHIFT					0
-#define OMAP4430_PRESCAL_WIDTH					0x6
-#define OMAP4430_PRESCAL_MASK					(0x3f << 0)
-
-/* Used by REVISION_CM1, REVISION_CM2 */
-#define OMAP4430_R_RTL_SHIFT					11
-#define OMAP4430_R_RTL_WIDTH					0x5
-#define OMAP4430_R_RTL_MASK					(0x1f << 11)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL */
-#define OMAP4430_SAR_MODE_SHIFT					4
-#define OMAP4430_SAR_MODE_WIDTH					0x1
-#define OMAP4430_SAR_MODE_MASK					(1 << 4)
-
-/* Used by CM_SCALE_FCLK */
 #define OMAP4430_SCALE_FCLK_SHIFT				0
 #define OMAP4430_SCALE_FCLK_WIDTH				0x1
-#define OMAP4430_SCALE_FCLK_MASK				(1 << 0)
-
-/* Used by REVISION_CM1, REVISION_CM2 */
-#define OMAP4430_SCHEME_SHIFT					30
-#define OMAP4430_SCHEME_WIDTH					0x2
-#define OMAP4430_SCHEME_MASK					(0x3 << 30)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_SDMA_DYNDEP_SHIFT				11
-#define OMAP4430_SDMA_DYNDEP_WIDTH				0x1
-#define OMAP4430_SDMA_DYNDEP_MASK				(1 << 11)
-
-/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
-#define OMAP4430_SDMA_STATDEP_SHIFT				11
-#define OMAP4430_SDMA_STATDEP_WIDTH				0x1
-#define OMAP4430_SDMA_STATDEP_MASK				(1 << 11)
-
-/* Used by CM_CLKSEL_ABE */
 #define OMAP4430_SLIMBUS_CLK_GATE_SHIFT				10
-#define OMAP4430_SLIMBUS_CLK_GATE_WIDTH				0x1
-#define OMAP4430_SLIMBUS_CLK_GATE_MASK				(1 << 10)
-
-/*
- * Used by CM1_ABE_AESS_CLKCTRL, CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL,
- * CM_D2D_SAD2D_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
- * CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL,
- * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL,
- * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_FS_CLKCTRL,
- * CM_L3INIT_USB_OTG_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, CM_MPU_MPU_CLKCTRL,
- * CM_SDMA_SDMA_CLKCTRL, CM_TESLA_TESLA_CLKCTRL
- */
-#define OMAP4430_STBYST_SHIFT					18
-#define OMAP4430_STBYST_WIDTH					0x1
-#define OMAP4430_STBYST_MASK					(1 << 18)
-
-/*
- * Used by CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDRPHY,
- * CM_IDLEST_DPLL_IVA, CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER,
- * CM_IDLEST_DPLL_UNIPRO, CM_IDLEST_DPLL_USB
- */
-#define OMAP4430_ST_DPLL_CLK_SHIFT				0
-#define OMAP4430_ST_DPLL_CLK_WIDTH				0x1
 #define OMAP4430_ST_DPLL_CLK_MASK				(1 << 0)
-
-/* Used by CM_CLKDCOLDO_DPLL_USB */
-#define OMAP4430_ST_DPLL_CLKDCOLDO_SHIFT			9
-#define OMAP4430_ST_DPLL_CLKDCOLDO_WIDTH			0x1
-#define OMAP4430_ST_DPLL_CLKDCOLDO_MASK				(1 << 9)
-
-/*
- * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY,
- * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB
- */
-#define OMAP4430_ST_DPLL_CLKOUT_SHIFT				9
-#define OMAP4430_ST_DPLL_CLKOUT_WIDTH				0x1
-#define OMAP4430_ST_DPLL_CLKOUT_MASK				(1 << 9)
-
-/* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */
-#define OMAP4430_ST_DPLL_CLKOUTHIF_SHIFT			9
-#define OMAP4430_ST_DPLL_CLKOUTHIF_WIDTH			0x1
-#define OMAP4430_ST_DPLL_CLKOUTHIF_MASK				(1 << 9)
-
-/* Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO */
-#define OMAP4430_ST_DPLL_CLKOUTX2_SHIFT				11
-#define OMAP4430_ST_DPLL_CLKOUTX2_WIDTH				0x1
-#define OMAP4430_ST_DPLL_CLKOUTX2_MASK				(1 << 11)
-
-/*
- * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA,
- * CM_DIV_M4_DPLL_PER
- */
-#define OMAP4430_ST_HSDIVIDER_CLKOUT1_SHIFT			9
-#define OMAP4430_ST_HSDIVIDER_CLKOUT1_WIDTH			0x1
-#define OMAP4430_ST_HSDIVIDER_CLKOUT1_MASK			(1 << 9)
-
-/*
- * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA,
- * CM_DIV_M5_DPLL_PER
- */
-#define OMAP4430_ST_HSDIVIDER_CLKOUT2_SHIFT			9
-#define OMAP4430_ST_HSDIVIDER_CLKOUT2_WIDTH			0x1
-#define OMAP4430_ST_HSDIVIDER_CLKOUT2_MASK			(1 << 9)
-
-/* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
-#define OMAP4430_ST_HSDIVIDER_CLKOUT3_SHIFT			9
-#define OMAP4430_ST_HSDIVIDER_CLKOUT3_WIDTH			0x1
-#define OMAP4430_ST_HSDIVIDER_CLKOUT3_MASK			(1 << 9)
-
-/* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
-#define OMAP4430_ST_HSDIVIDER_CLKOUT4_SHIFT			9
-#define OMAP4430_ST_HSDIVIDER_CLKOUT4_WIDTH			0x1
-#define OMAP4430_ST_HSDIVIDER_CLKOUT4_MASK			(1 << 9)
-
-/*
- * Used by CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDRPHY,
- * CM_IDLEST_DPLL_IVA, CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER,
- * CM_IDLEST_DPLL_UNIPRO, CM_IDLEST_DPLL_USB
- */
-#define OMAP4430_ST_MN_BYPASS_SHIFT				8
-#define OMAP4430_ST_MN_BYPASS_WIDTH				0x1
-#define OMAP4430_ST_MN_BYPASS_MASK				(1 << 8)
-
-/* Used by CM_SYS_CLKSEL */
 #define OMAP4430_SYS_CLKSEL_SHIFT				0
 #define OMAP4430_SYS_CLKSEL_WIDTH				0x3
-#define OMAP4430_SYS_CLKSEL_MASK				(0x7 << 0)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_TESLA_DYNDEP_SHIFT				1
-#define OMAP4430_TESLA_DYNDEP_WIDTH				0x1
-#define OMAP4430_TESLA_DYNDEP_MASK				(1 << 1)
-
-/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
 #define OMAP4430_TESLA_STATDEP_SHIFT				1
-#define OMAP4430_TESLA_STATDEP_WIDTH				0x1
-#define OMAP4430_TESLA_STATDEP_MASK				(1 << 1)
-
-/*
- * Used by CM_D2D_DYNAMICDEP, CM_DUCATI_DYNAMICDEP, CM_EMU_DYNAMICDEP,
- * CM_L3_1_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP,
- * CM_L4PER_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP
- */
-#define OMAP4430_WINDOWSIZE_SHIFT				24
-#define OMAP4430_WINDOWSIZE_WIDTH				0x4
-#define OMAP4430_WINDOWSIZE_MASK				(0xf << 24)
-
-/* Used by REVISION_CM1, REVISION_CM2 */
-#define OMAP4430_X_MAJOR_SHIFT					8
-#define OMAP4430_X_MAJOR_WIDTH					0x3
-#define OMAP4430_X_MAJOR_MASK					(0x7 << 8)
-
-/* Used by REVISION_CM1, REVISION_CM2 */
-#define OMAP4430_Y_MINOR_SHIFT					0
-#define OMAP4430_Y_MINOR_WIDTH					0x6
-#define OMAP4430_Y_MINOR_MASK					(0x3f << 0)
 #endif
diff --git a/arch/arm/mach-omap2/cm-regbits-54xx.h b/arch/arm/mach-omap2/cm-regbits-54xx.h
index e83b8e3..896ae9f 100644
--- a/arch/arm/mach-omap2/cm-regbits-54xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-54xx.h
@@ -21,1717 +21,84 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_54XX_H
 #define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_54XX_H
 
-/* Used by CM_DSP_DYNAMICDEP, CM_L3MAIN1_DYNAMICDEP, CM_MPU_DYNAMICDEP */
-#define OMAP54XX_ABE_DYNDEP_SHIFT					3
-#define OMAP54XX_ABE_DYNDEP_WIDTH					0x1
-#define OMAP54XX_ABE_DYNDEP_MASK					(1 << 3)
-
-/*
- * Used by CM_C2C_STATICDEP, CM_DMA_STATICDEP, CM_DSP_STATICDEP,
- * CM_IPU_STATICDEP, CM_L3INIT_STATICDEP, CM_MIPIEXT_STATICDEP, CM_MPU_STATICDEP
- */
 #define OMAP54XX_ABE_STATDEP_SHIFT					3
-#define OMAP54XX_ABE_STATDEP_WIDTH					0x1
-#define OMAP54XX_ABE_STATDEP_MASK					(1 << 3)
-
-/*
- * Used by CM_AUTOIDLE_DPLL_ABE, CM_AUTOIDLE_DPLL_CORE, CM_AUTOIDLE_DPLL_IVA,
- * CM_AUTOIDLE_DPLL_MPU, CM_AUTOIDLE_DPLL_PER, CM_AUTOIDLE_DPLL_UNIPRO1,
- * CM_AUTOIDLE_DPLL_UNIPRO2, CM_AUTOIDLE_DPLL_USB
- */
-#define OMAP54XX_AUTO_DPLL_MODE_SHIFT					0
-#define OMAP54XX_AUTO_DPLL_MODE_WIDTH					0x3
 #define OMAP54XX_AUTO_DPLL_MODE_MASK					(0x7 << 0)
-
-/* Used by CM_L3MAIN2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
-#define OMAP54XX_C2C_DYNDEP_SHIFT					18
-#define OMAP54XX_C2C_DYNDEP_WIDTH					0x1
-#define OMAP54XX_C2C_DYNDEP_MASK					(1 << 18)
-
-/* Used by CM_MPU_STATICDEP */
-#define OMAP54XX_C2C_STATDEP_SHIFT					18
-#define OMAP54XX_C2C_STATDEP_WIDTH					0x1
-#define OMAP54XX_C2C_STATDEP_MASK					(1 << 18)
-
-/* Used by CM_IPU_DYNAMICDEP, CM_L3MAIN2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
-#define OMAP54XX_CAM_DYNDEP_SHIFT					9
-#define OMAP54XX_CAM_DYNDEP_WIDTH					0x1
-#define OMAP54XX_CAM_DYNDEP_MASK					(1 << 9)
-
-/*
- * Used by CM_DMA_STATICDEP, CM_DSP_STATICDEP, CM_IPU_STATICDEP,
- * CM_MPU_STATICDEP
- */
-#define OMAP54XX_CAM_STATDEP_SHIFT					9
-#define OMAP54XX_CAM_STATDEP_WIDTH					0x1
-#define OMAP54XX_CAM_STATDEP_MASK					(1 << 9)
-
-/* Used by CM_ABE_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_ABE_24M_GFCLK_SHIFT			13
-#define OMAP54XX_CLKACTIVITY_ABE_24M_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_ABE_24M_GFCLK_MASK				(1 << 13)
-
-/* Used by CM_ABE_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_ABE_32K_CLK_SHIFT				12
-#define OMAP54XX_CLKACTIVITY_ABE_32K_CLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_ABE_32K_CLK_MASK				(1 << 12)
-
-/* Used by CM_ABE_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_ABE_GICLK_SHIFT				9
-#define OMAP54XX_CLKACTIVITY_ABE_GICLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_ABE_GICLK_MASK				(1 << 9)
-
-/* Used by CM_WKUPAON_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_ABE_LP_CLK_SHIFT				9
-#define OMAP54XX_CLKACTIVITY_ABE_LP_CLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_ABE_LP_CLK_MASK				(1 << 9)
-
-/* Used by CM_ABE_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_ABE_SYS_CLK_SHIFT				11
-#define OMAP54XX_CLKACTIVITY_ABE_SYS_CLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_ABE_SYS_CLK_MASK				(1 << 11)
-
-/* Used by CM_ABE_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_ABE_X2_CLK_SHIFT				8
-#define OMAP54XX_CLKACTIVITY_ABE_X2_CLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_ABE_X2_CLK_MASK				(1 << 8)
-
-/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_BB2D_GFCLK_SHIFT				13
-#define OMAP54XX_CLKACTIVITY_BB2D_GFCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_BB2D_GFCLK_MASK				(1 << 13)
-
-/* Used by CM_C2C_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_C2C_GFCLK_SHIFT				9
-#define OMAP54XX_CLKACTIVITY_C2C_GFCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_C2C_GFCLK_MASK				(1 << 9)
-
-/* Used by CM_C2C_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_C2C_GICLK_SHIFT				10
-#define OMAP54XX_CLKACTIVITY_C2C_GICLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_C2C_GICLK_MASK				(1 << 10)
-
-/* Used by CM_C2C_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_C2C_L4_GICLK_SHIFT				8
-#define OMAP54XX_CLKACTIVITY_C2C_L4_GICLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_C2C_L4_GICLK_MASK				(1 << 8)
-
-/* Used by CM_CAM_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_CAM_BOOST_GCLK_SHIFT			11
-#define OMAP54XX_CLKACTIVITY_CAM_BOOST_GCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_CAM_BOOST_GCLK_MASK			(1 << 11)
-
-/* Used by CM_CAM_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_CAM_GCLK_SHIFT				8
-#define OMAP54XX_CLKACTIVITY_CAM_GCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_CAM_GCLK_MASK				(1 << 8)
-
-/* Used by CM_CAM_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_CAM_L3_GICLK_SHIFT				12
-#define OMAP54XX_CLKACTIVITY_CAM_L3_GICLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_CAM_L3_GICLK_MASK				(1 << 12)
-
-/* Used by CM_COREAON_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_COREAON_32K_GFCLK_SHIFT			12
-#define OMAP54XX_CLKACTIVITY_COREAON_32K_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_COREAON_32K_GFCLK_MASK			(1 << 12)
-
-/* Used by CM_COREAON_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_COREAON_IO_SRCOMP_GFCLK_SHIFT		14
-#define OMAP54XX_CLKACTIVITY_COREAON_IO_SRCOMP_GFCLK_WIDTH		0x1
-#define OMAP54XX_CLKACTIVITY_COREAON_IO_SRCOMP_GFCLK_MASK		(1 << 14)
-
-/* Used by CM_COREAON_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_COREAON_L4_GICLK_SHIFT			8
-#define OMAP54XX_CLKACTIVITY_COREAON_L4_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_COREAON_L4_GICLK_MASK			(1 << 8)
-
-/* Used by CM_CAM_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_CSI_PHY_GFCLK_SHIFT			9
-#define OMAP54XX_CLKACTIVITY_CSI_PHY_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_CSI_PHY_GFCLK_MASK				(1 << 9)
-
-/* Used by CM_CUSTEFUSE_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_CUSTEFUSE_L4_GICLK_SHIFT			8
-#define OMAP54XX_CLKACTIVITY_CUSTEFUSE_L4_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_CUSTEFUSE_L4_GICLK_MASK			(1 << 8)
-
-/* Used by CM_CUSTEFUSE_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_CUSTEFUSE_SYS_GFCLK_SHIFT			9
-#define OMAP54XX_CLKACTIVITY_CUSTEFUSE_SYS_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_CUSTEFUSE_SYS_GFCLK_MASK			(1 << 9)
-
-/* Used by CM_EMIF_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_DLL_GCLK_SHIFT				9
-#define OMAP54XX_CLKACTIVITY_DLL_GCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_DLL_GCLK_MASK				(1 << 9)
-
-/* Used by CM_DMA_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_DMA_L3_GICLK_SHIFT				8
-#define OMAP54XX_CLKACTIVITY_DMA_L3_GICLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_DMA_L3_GICLK_MASK				(1 << 8)
-
-/* Used by CM_DSP_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_DSP_GCLK_SHIFT				8
-#define OMAP54XX_CLKACTIVITY_DSP_GCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_DSP_GCLK_MASK				(1 << 8)
-
-/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_DSS_GFCLK_SHIFT				9
-#define OMAP54XX_CLKACTIVITY_DSS_GFCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_DSS_GFCLK_MASK				(1 << 9)
-
-/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_DSS_L3_GICLK_SHIFT				8
-#define OMAP54XX_CLKACTIVITY_DSS_L3_GICLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_DSS_L3_GICLK_MASK				(1 << 8)
-
-/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_DSS_SYS_GFCLK_SHIFT			10
-#define OMAP54XX_CLKACTIVITY_DSS_SYS_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_DSS_SYS_GFCLK_MASK				(1 << 10)
-
-/* Used by CM_EMIF_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_EMIF_L3_GICLK_SHIFT			8
-#define OMAP54XX_CLKACTIVITY_EMIF_L3_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_EMIF_L3_GICLK_MASK				(1 << 8)
-
-/* Used by CM_EMIF_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_EMIF_LL_GCLK_SHIFT				11
-#define OMAP54XX_CLKACTIVITY_EMIF_LL_GCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_EMIF_LL_GCLK_MASK				(1 << 11)
-
-/* Used by CM_EMIF_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_EMIF_PHY_GCLK_SHIFT			10
-#define OMAP54XX_CLKACTIVITY_EMIF_PHY_GCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_EMIF_PHY_GCLK_MASK				(1 << 10)
-
-/* Used by CM_EMU_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_EMU_SYS_GCLK_SHIFT				8
-#define OMAP54XX_CLKACTIVITY_EMU_SYS_GCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_EMU_SYS_GCLK_MASK				(1 << 8)
-
-/* Used by CM_CAM_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_FDIF_GCLK_SHIFT				10
-#define OMAP54XX_CLKACTIVITY_FDIF_GCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_FDIF_GCLK_MASK				(1 << 10)
-
-/* Used by CM_ABE_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_FUNC_24M_GFCLK_SHIFT			10
-#define OMAP54XX_CLKACTIVITY_FUNC_24M_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_FUNC_24M_GFCLK_MASK			(1 << 10)
-
-/* Used by CM_GPU_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_GPU_CORE_GCLK_SHIFT			9
-#define OMAP54XX_CLKACTIVITY_GPU_CORE_GCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_GPU_CORE_GCLK_MASK				(1 << 9)
-
-/* Used by CM_GPU_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_GPU_HYD_GCLK_SHIFT				10
-#define OMAP54XX_CLKACTIVITY_GPU_HYD_GCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_GPU_HYD_GCLK_MASK				(1 << 10)
-
-/* Used by CM_GPU_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_GPU_SYS_GCLK_SHIFT				8
-#define OMAP54XX_CLKACTIVITY_GPU_SYS_GCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_GPU_SYS_GCLK_MASK				(1 << 8)
-
-/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_HDMI_CEC_GFCLK_SHIFT			12
-#define OMAP54XX_CLKACTIVITY_HDMI_CEC_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_HDMI_CEC_GFCLK_MASK			(1 << 12)
-
-/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_HDMI_PHY_GFCLK_SHIFT			11
-#define OMAP54XX_CLKACTIVITY_HDMI_PHY_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_HDMI_PHY_GFCLK_MASK			(1 << 11)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_HSIC_P1_480M_GFCLK_SHIFT			20
-#define OMAP54XX_CLKACTIVITY_HSIC_P1_480M_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_HSIC_P1_480M_GFCLK_MASK			(1 << 20)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_HSIC_P1_GFCLK_SHIFT			26
-#define OMAP54XX_CLKACTIVITY_HSIC_P1_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_HSIC_P1_GFCLK_MASK				(1 << 26)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_HSIC_P2_480M_GFCLK_SHIFT			21
-#define OMAP54XX_CLKACTIVITY_HSIC_P2_480M_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_HSIC_P2_480M_GFCLK_MASK			(1 << 21)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_HSIC_P2_GFCLK_SHIFT			27
-#define OMAP54XX_CLKACTIVITY_HSIC_P2_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_HSIC_P2_GFCLK_MASK				(1 << 27)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_HSIC_P3_480M_GFCLK_SHIFT			6
-#define OMAP54XX_CLKACTIVITY_HSIC_P3_480M_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_HSIC_P3_480M_GFCLK_MASK			(1 << 6)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_HSIC_P3_GFCLK_SHIFT			7
-#define OMAP54XX_CLKACTIVITY_HSIC_P3_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_HSIC_P3_GFCLK_MASK				(1 << 7)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_HSI_GFCLK_SHIFT				16
-#define OMAP54XX_CLKACTIVITY_HSI_GFCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_HSI_GFCLK_MASK				(1 << 16)
-
-/* Used by CM_IPU_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_IPU_GCLK_SHIFT				8
-#define OMAP54XX_CLKACTIVITY_IPU_GCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_IPU_GCLK_MASK				(1 << 8)
-
-/* Used by CM_IVA_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_IVA_GCLK_SHIFT				8
-#define OMAP54XX_CLKACTIVITY_IVA_GCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_IVA_GCLK_MASK				(1 << 8)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L3INIT_48M_GFCLK_SHIFT			12
-#define OMAP54XX_CLKACTIVITY_L3INIT_48M_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_L3INIT_48M_GFCLK_MASK			(1 << 12)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L3INIT_60M_P1_GFCLK_SHIFT			28
-#define OMAP54XX_CLKACTIVITY_L3INIT_60M_P1_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_L3INIT_60M_P1_GFCLK_MASK			(1 << 28)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L3INIT_60M_P2_GFCLK_SHIFT			29
-#define OMAP54XX_CLKACTIVITY_L3INIT_60M_P2_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_L3INIT_60M_P2_GFCLK_MASK			(1 << 29)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L3INIT_L3_GICLK_SHIFT			8
-#define OMAP54XX_CLKACTIVITY_L3INIT_L3_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_L3INIT_L3_GICLK_MASK			(1 << 8)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L3INIT_L4_GICLK_SHIFT			9
-#define OMAP54XX_CLKACTIVITY_L3INIT_L4_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_L3INIT_L4_GICLK_MASK			(1 << 9)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L3INIT_USB_OTG_SS_LFPS_TX_GFCLK_SHIFT	11
-#define OMAP54XX_CLKACTIVITY_L3INIT_USB_OTG_SS_LFPS_TX_GFCLK_WIDTH	0x1
-#define OMAP54XX_CLKACTIVITY_L3INIT_USB_OTG_SS_LFPS_TX_GFCLK_MASK	(1 << 11)
-
-/* Used by CM_L3INSTR_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L3INSTR_DLL_AGING_GCLK_SHIFT		9
-#define OMAP54XX_CLKACTIVITY_L3INSTR_DLL_AGING_GCLK_WIDTH		0x1
-#define OMAP54XX_CLKACTIVITY_L3INSTR_DLL_AGING_GCLK_MASK		(1 << 9)
-
-/* Used by CM_L3INSTR_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L3INSTR_L3_GICLK_SHIFT			8
-#define OMAP54XX_CLKACTIVITY_L3INSTR_L3_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_L3INSTR_L3_GICLK_MASK			(1 << 8)
-
-/* Used by CM_L3INSTR_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L3INSTR_TS_GCLK_SHIFT			10
-#define OMAP54XX_CLKACTIVITY_L3INSTR_TS_GCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_L3INSTR_TS_GCLK_MASK			(1 << 10)
-
-/* Used by CM_L3MAIN1_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L3MAIN1_L3_GICLK_SHIFT			8
-#define OMAP54XX_CLKACTIVITY_L3MAIN1_L3_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_L3MAIN1_L3_GICLK_MASK			(1 << 8)
-
-/* Used by CM_L3MAIN2_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L3MAIN2_L3_GICLK_SHIFT			8
-#define OMAP54XX_CLKACTIVITY_L3MAIN2_L3_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_L3MAIN2_L3_GICLK_MASK			(1 << 8)
-
-/* Used by CM_L4CFG_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L4CFG_L4_GICLK_SHIFT			8
-#define OMAP54XX_CLKACTIVITY_L4CFG_L4_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_L4CFG_L4_GICLK_MASK			(1 << 8)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L4PER_L4_GICLK_SHIFT			8
-#define OMAP54XX_CLKACTIVITY_L4PER_L4_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_L4PER_L4_GICLK_MASK			(1 << 8)
-
-/* Used by CM_L4SEC_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L4SEC_L3_GICLK_SHIFT			8
-#define OMAP54XX_CLKACTIVITY_L4SEC_L3_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_L4SEC_L3_GICLK_MASK			(1 << 8)
-
-/* Used by CM_L4SEC_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_L4SEC_L4_GICLK_SHIFT			9
-#define OMAP54XX_CLKACTIVITY_L4SEC_L4_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_L4SEC_L4_GICLK_MASK			(1 << 9)
-
-/* Used by CM_MIPIEXT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_MIPIEXT_L3_GICLK_SHIFT			8
-#define OMAP54XX_CLKACTIVITY_MIPIEXT_L3_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_MIPIEXT_L3_GICLK_MASK			(1 << 8)
-
-/* Used by CM_MIPIEXT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_MIPIEXT_PHY_REF_GFCLK_SHIFT		11
-#define OMAP54XX_CLKACTIVITY_MIPIEXT_PHY_REF_GFCLK_WIDTH		0x1
-#define OMAP54XX_CLKACTIVITY_MIPIEXT_PHY_REF_GFCLK_MASK			(1 << 11)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_MMC1_32K_GFCLK_SHIFT			2
-#define OMAP54XX_CLKACTIVITY_MMC1_32K_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_MMC1_32K_GFCLK_MASK			(1 << 2)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_MMC1_GFCLK_SHIFT				17
-#define OMAP54XX_CLKACTIVITY_MMC1_GFCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_MMC1_GFCLK_MASK				(1 << 17)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_MMC2_GFCLK_SHIFT				18
-#define OMAP54XX_CLKACTIVITY_MMC2_GFCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_MMC2_GFCLK_MASK				(1 << 18)
-
-/* Used by CM_MPU_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_MPU_GCLK_SHIFT				8
-#define OMAP54XX_CLKACTIVITY_MPU_GCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_MPU_GCLK_MASK				(1 << 8)
-
-/* Used by CM_ABE_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_PAD_CLKS_SHIFT				14
-#define OMAP54XX_CLKACTIVITY_PAD_CLKS_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_PAD_CLKS_MASK				(1 << 14)
-
-/* Used by CM_ABE_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_PAD_SLIMBUS1_CLK_SHIFT			15
-#define OMAP54XX_CLKACTIVITY_PAD_SLIMBUS1_CLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_PAD_SLIMBUS1_CLK_MASK			(1 << 15)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_PAD_XCLK60MHSP1_SHIFT			3
-#define OMAP54XX_CLKACTIVITY_PAD_XCLK60MHSP1_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_PAD_XCLK60MHSP1_MASK			(1 << 3)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_PAD_XCLK60MHSP2_SHIFT			4
-#define OMAP54XX_CLKACTIVITY_PAD_XCLK60MHSP2_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_PAD_XCLK60MHSP2_MASK			(1 << 4)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_PER_12M_GFCLK_SHIFT			15
-#define OMAP54XX_CLKACTIVITY_PER_12M_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_PER_12M_GFCLK_MASK				(1 << 15)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_PER_32K_GFCLK_SHIFT			17
-#define OMAP54XX_CLKACTIVITY_PER_32K_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_PER_32K_GFCLK_MASK				(1 << 17)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_PER_48M_GFCLK_SHIFT			18
-#define OMAP54XX_CLKACTIVITY_PER_48M_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_PER_48M_GFCLK_MASK				(1 << 18)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_PER_96M_GFCLK_SHIFT			19
-#define OMAP54XX_CLKACTIVITY_PER_96M_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_PER_96M_GFCLK_MASK				(1 << 19)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_SATA_REF_GFCLK_SHIFT			19
-#define OMAP54XX_CLKACTIVITY_SATA_REF_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_SATA_REF_GFCLK_MASK			(1 << 19)
-
-/* Used by CM_COREAON_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_SR_CORE_SYS_GFCLK_SHIFT			11
-#define OMAP54XX_CLKACTIVITY_SR_CORE_SYS_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_SR_CORE_SYS_GFCLK_MASK			(1 << 11)
-
-/* Used by CM_COREAON_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_SR_MM_SYS_GFCLK_SHIFT			10
-#define OMAP54XX_CLKACTIVITY_SR_MM_SYS_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_SR_MM_SYS_GFCLK_MASK			(1 << 10)
-
-/* Used by CM_COREAON_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_SR_MPU_SYS_GFCLK_SHIFT			9
-#define OMAP54XX_CLKACTIVITY_SR_MPU_SYS_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_SR_MPU_SYS_GFCLK_MASK			(1 << 9)
-
-/* Used by CM_WKUPAON_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_SYS_CLK_SHIFT				8
-#define OMAP54XX_CLKACTIVITY_SYS_CLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_SYS_CLK_MASK				(1 << 8)
-
-/* Used by CM_WKUPAON_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_SYS_CLK_ALL_SHIFT				15
-#define OMAP54XX_CLKACTIVITY_SYS_CLK_ALL_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_SYS_CLK_ALL_MASK				(1 << 15)
-
-/* Used by CM_WKUPAON_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_SYS_CLK_FUNC_SHIFT				14
-#define OMAP54XX_CLKACTIVITY_SYS_CLK_FUNC_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_SYS_CLK_FUNC_MASK				(1 << 14)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_TIMER10_GFCLK_SHIFT			9
-#define OMAP54XX_CLKACTIVITY_TIMER10_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_TIMER10_GFCLK_MASK				(1 << 9)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_TIMER11_GFCLK_SHIFT			10
-#define OMAP54XX_CLKACTIVITY_TIMER11_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_TIMER11_GFCLK_MASK				(1 << 10)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_TIMER2_GFCLK_SHIFT				11
-#define OMAP54XX_CLKACTIVITY_TIMER2_GFCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_TIMER2_GFCLK_MASK				(1 << 11)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_TIMER3_GFCLK_SHIFT				12
-#define OMAP54XX_CLKACTIVITY_TIMER3_GFCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_TIMER3_GFCLK_MASK				(1 << 12)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_TIMER4_GFCLK_SHIFT				13
-#define OMAP54XX_CLKACTIVITY_TIMER4_GFCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_TIMER4_GFCLK_MASK				(1 << 13)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_TIMER9_GFCLK_SHIFT				14
-#define OMAP54XX_CLKACTIVITY_TIMER9_GFCLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_TIMER9_GFCLK_MASK				(1 << 14)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_TLL_CH0_GFCLK_SHIFT			22
-#define OMAP54XX_CLKACTIVITY_TLL_CH0_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_TLL_CH0_GFCLK_MASK				(1 << 22)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_TLL_CH1_GFCLK_SHIFT			23
-#define OMAP54XX_CLKACTIVITY_TLL_CH1_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_TLL_CH1_GFCLK_MASK				(1 << 23)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_TLL_CH2_GFCLK_SHIFT			24
-#define OMAP54XX_CLKACTIVITY_TLL_CH2_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_TLL_CH2_GFCLK_MASK				(1 << 24)
-
-/* Used by CM_MIPIEXT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_UNIPRO1_DPLL_CLK_SHIFT			10
-#define OMAP54XX_CLKACTIVITY_UNIPRO1_DPLL_CLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_UNIPRO1_DPLL_CLK_MASK			(1 << 10)
-
-/* Used by CM_MIPIEXT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_UNIPRO1_PHY_GFCLK_SHIFT			13
-#define OMAP54XX_CLKACTIVITY_UNIPRO1_PHY_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_UNIPRO1_PHY_GFCLK_MASK			(1 << 13)
-
-/* Used by CM_MIPIEXT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_UNIPRO1_TXPHY_LS_GFCLK_SHIFT		12
-#define OMAP54XX_CLKACTIVITY_UNIPRO1_TXPHY_LS_GFCLK_WIDTH		0x1
-#define OMAP54XX_CLKACTIVITY_UNIPRO1_TXPHY_LS_GFCLK_MASK		(1 << 12)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_UNIPRO2_DPLL_CLK_SHIFT			10
-#define OMAP54XX_CLKACTIVITY_UNIPRO2_DPLL_CLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_UNIPRO2_DPLL_CLK_MASK			(1 << 10)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_UNIPRO2_PHY_GFCLK_SHIFT			13
-#define OMAP54XX_CLKACTIVITY_UNIPRO2_PHY_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_UNIPRO2_PHY_GFCLK_MASK			(1 << 13)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_UNIPRO2_PHY_REF_GFCLK_SHIFT		5
-#define OMAP54XX_CLKACTIVITY_UNIPRO2_PHY_REF_GFCLK_WIDTH		0x1
-#define OMAP54XX_CLKACTIVITY_UNIPRO2_PHY_REF_GFCLK_MASK			(1 << 5)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_USB_DPLL_CLK_SHIFT				14
-#define OMAP54XX_CLKACTIVITY_USB_DPLL_CLK_WIDTH				0x1
-#define OMAP54XX_CLKACTIVITY_USB_DPLL_CLK_MASK				(1 << 14)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_USB_DPLL_HS_CLK_SHIFT			15
-#define OMAP54XX_CLKACTIVITY_USB_DPLL_HS_CLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_USB_DPLL_HS_CLK_MASK			(1 << 15)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_USB_OTG_SS_REF_CLK_SHIFT			31
-#define OMAP54XX_CLKACTIVITY_USB_OTG_SS_REF_CLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_USB_OTG_SS_REF_CLK_MASK			(1 << 31)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_UTMI_P3_GFCLK_SHIFT			30
-#define OMAP54XX_CLKACTIVITY_UTMI_P3_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_UTMI_P3_GFCLK_MASK				(1 << 30)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_UTMI_ROOT_GFCLK_SHIFT			25
-#define OMAP54XX_CLKACTIVITY_UTMI_ROOT_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_UTMI_ROOT_GFCLK_MASK			(1 << 25)
-
-/* Used by CM_WKUPAON_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_WKUPAON_32K_GFCLK_SHIFT			11
-#define OMAP54XX_CLKACTIVITY_WKUPAON_32K_GFCLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_WKUPAON_32K_GFCLK_MASK			(1 << 11)
-
-/* Used by CM_WKUPAON_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_WKUPAON_GICLK_SHIFT			12
-#define OMAP54XX_CLKACTIVITY_WKUPAON_GICLK_WIDTH			0x1
-#define OMAP54XX_CLKACTIVITY_WKUPAON_GICLK_MASK				(1 << 12)
-
-/* Used by CM_WKUPAON_CLKSTCTRL */
-#define OMAP54XX_CLKACTIVITY_WKUPAON_IO_SRCOMP_GFCLK_SHIFT		13
-#define OMAP54XX_CLKACTIVITY_WKUPAON_IO_SRCOMP_GFCLK_WIDTH		0x1
-#define OMAP54XX_CLKACTIVITY_WKUPAON_IO_SRCOMP_GFCLK_MASK		(1 << 13)
-
-/* Used by CM_COREAON_IO_SRCOMP_CLKCTRL, CM_WKUPAON_IO_SRCOMP_CLKCTRL */
-#define OMAP54XX_CLKEN_SRCOMP_FCLK_SHIFT				8
-#define OMAP54XX_CLKEN_SRCOMP_FCLK_WIDTH				0x1
-#define OMAP54XX_CLKEN_SRCOMP_FCLK_MASK					(1 << 8)
-
-/*
- * Used by CM_ABE_TIMER5_CLKCTRL, CM_ABE_TIMER6_CLKCTRL, CM_ABE_TIMER7_CLKCTRL,
- * CM_ABE_TIMER8_CLKCTRL, CM_L3INIT_HSI_CLKCTRL, CM_L4PER_TIMER10_CLKCTRL,
- * CM_L4PER_TIMER11_CLKCTRL, CM_L4PER_TIMER2_CLKCTRL, CM_L4PER_TIMER3_CLKCTRL,
- * CM_L4PER_TIMER4_CLKCTRL, CM_L4PER_TIMER9_CLKCTRL, CM_WKUPAON_TIMER1_CLKCTRL
- */
 #define OMAP54XX_CLKSEL_SHIFT						24
 #define OMAP54XX_CLKSEL_WIDTH						0x1
-#define OMAP54XX_CLKSEL_MASK						(1 << 24)
-
-/*
- * Renamed from CLKSEL Used by CM_CLKSEL_ABE_DSS_SYS, CM_CLKSEL_ABE_PLL_REF,
- * CM_CLKSEL_USB_60MHZ, CM_CLKSEL_WKUPAON
- */
 #define OMAP54XX_CLKSEL_0_0_SHIFT					0
 #define OMAP54XX_CLKSEL_0_0_WIDTH					0x1
-#define OMAP54XX_CLKSEL_0_0_MASK					(1 << 0)
-
-/* Renamed from CLKSEL Used by CM_BYPCLK_DPLL_IVA, CM_BYPCLK_DPLL_MPU */
-#define OMAP54XX_CLKSEL_0_1_SHIFT					0
-#define OMAP54XX_CLKSEL_0_1_WIDTH					0x2
-#define OMAP54XX_CLKSEL_0_1_MASK					(0x3 << 0)
-
-/* Renamed from CLKSEL Used by CM_L3INSTR_CTRL_MODULE_BANDGAP_CLKCTRL */
-#define OMAP54XX_CLKSEL_24_25_SHIFT					24
-#define OMAP54XX_CLKSEL_24_25_WIDTH					0x2
-#define OMAP54XX_CLKSEL_24_25_MASK					(0x3 << 24)
-
-/* Used by CM_MPU_MPU_CLKCTRL */
-#define OMAP54XX_CLKSEL_ABE_DIV_MODE_SHIFT				26
-#define OMAP54XX_CLKSEL_ABE_DIV_MODE_WIDTH				0x1
-#define OMAP54XX_CLKSEL_ABE_DIV_MODE_MASK				(1 << 26)
-
-/* Used by CM_ABE_AESS_CLKCTRL */
 #define OMAP54XX_CLKSEL_AESS_FCLK_SHIFT					24
 #define OMAP54XX_CLKSEL_AESS_FCLK_WIDTH					0x1
-#define OMAP54XX_CLKSEL_AESS_FCLK_MASK					(1 << 24)
-
-/* Used by CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL */
 #define OMAP54XX_CLKSEL_DIV_SHIFT					25
 #define OMAP54XX_CLKSEL_DIV_WIDTH					0x1
-#define OMAP54XX_CLKSEL_DIV_MASK					(1 << 25)
-
-/* Used by CM_MPU_MPU_CLKCTRL */
-#define OMAP54XX_CLKSEL_EMIF_DIV_MODE_SHIFT				24
-#define OMAP54XX_CLKSEL_EMIF_DIV_MODE_WIDTH				0x2
-#define OMAP54XX_CLKSEL_EMIF_DIV_MODE_MASK				(0x3 << 24)
-
-/* Used by CM_CAM_FDIF_CLKCTRL */
 #define OMAP54XX_CLKSEL_FCLK_SHIFT					24
 #define OMAP54XX_CLKSEL_FCLK_WIDTH					0x1
-#define OMAP54XX_CLKSEL_FCLK_MASK					(1 << 24)
-
-/* Used by CM_GPU_GPU_CLKCTRL */
 #define OMAP54XX_CLKSEL_GPU_CORE_GCLK_SHIFT				24
 #define OMAP54XX_CLKSEL_GPU_CORE_GCLK_WIDTH				0x1
-#define OMAP54XX_CLKSEL_GPU_CORE_GCLK_MASK				(1 << 24)
-
-/* Used by CM_GPU_GPU_CLKCTRL */
 #define OMAP54XX_CLKSEL_GPU_HYD_GCLK_SHIFT				25
 #define OMAP54XX_CLKSEL_GPU_HYD_GCLK_WIDTH				0x1
-#define OMAP54XX_CLKSEL_GPU_HYD_GCLK_MASK				(1 << 25)
-
-/* Used by CM_GPU_GPU_CLKCTRL */
-#define OMAP54XX_CLKSEL_GPU_SYS_CLK_SHIFT				26
-#define OMAP54XX_CLKSEL_GPU_SYS_CLK_WIDTH				0x1
-#define OMAP54XX_CLKSEL_GPU_SYS_CLK_MASK				(1 << 26)
-
-/*
- * Used by CM_ABE_DMIC_CLKCTRL, CM_ABE_MCASP_CLKCTRL, CM_ABE_MCBSP1_CLKCTRL,
- * CM_ABE_MCBSP2_CLKCTRL, CM_ABE_MCBSP3_CLKCTRL
- */
 #define OMAP54XX_CLKSEL_INTERNAL_SOURCE_SHIFT				26
 #define OMAP54XX_CLKSEL_INTERNAL_SOURCE_WIDTH				0x2
-#define OMAP54XX_CLKSEL_INTERNAL_SOURCE_MASK				(0x3 << 26)
-
-/* Used by CM_CLKSEL_CORE */
-#define OMAP54XX_CLKSEL_L3_SHIFT					4
-#define OMAP54XX_CLKSEL_L3_WIDTH					0x1
-#define OMAP54XX_CLKSEL_L3_MASK						(1 << 4)
-
-/* Renamed from CLKSEL_L3 Used by CM_SHADOW_FREQ_CONFIG2 */
-#define OMAP54XX_CLKSEL_L3_1_1_SHIFT					1
-#define OMAP54XX_CLKSEL_L3_1_1_WIDTH					0x1
-#define OMAP54XX_CLKSEL_L3_1_1_MASK					(1 << 1)
-
-/* Used by CM_CLKSEL_CORE */
-#define OMAP54XX_CLKSEL_L4_SHIFT					8
-#define OMAP54XX_CLKSEL_L4_WIDTH					0x1
-#define OMAP54XX_CLKSEL_L4_MASK						(1 << 8)
-
-/* Used by CM_EMIF_EMIF1_CLKCTRL */
-#define OMAP54XX_CLKSEL_LL_SHIFT					24
-#define OMAP54XX_CLKSEL_LL_WIDTH					0x1
-#define OMAP54XX_CLKSEL_LL_MASK						(1 << 24)
-
-/* Used by CM_CLKSEL_ABE */
 #define OMAP54XX_CLKSEL_OPP_SHIFT					0
 #define OMAP54XX_CLKSEL_OPP_WIDTH					0x2
-#define OMAP54XX_CLKSEL_OPP_MASK					(0x3 << 0)
-
-/* Renamed from CLKSEL_OPP Used by CM_L3INIT_UNIPRO2_CLKCTRL */
-#define OMAP54XX_CLKSEL_OPP_24_24_SHIFT					24
-#define OMAP54XX_CLKSEL_OPP_24_24_WIDTH					0x1
-#define OMAP54XX_CLKSEL_OPP_24_24_MASK					(1 << 24)
-
-/*
- * Used by CM_ABE_DMIC_CLKCTRL, CM_ABE_MCASP_CLKCTRL, CM_ABE_MCBSP1_CLKCTRL,
- * CM_ABE_MCBSP2_CLKCTRL, CM_ABE_MCBSP3_CLKCTRL
- */
 #define OMAP54XX_CLKSEL_SOURCE_SHIFT					24
 #define OMAP54XX_CLKSEL_SOURCE_WIDTH					0x2
-#define OMAP54XX_CLKSEL_SOURCE_MASK					(0x3 << 24)
-
-/*
- * Renamed from CLKSEL_SOURCE Used by CM_L3INIT_MMC1_CLKCTRL,
- * CM_L3INIT_MMC2_CLKCTRL
- */
 #define OMAP54XX_CLKSEL_SOURCE_L3INIT_MMC1_SHIFT			24
 #define OMAP54XX_CLKSEL_SOURCE_L3INIT_MMC1_WIDTH			0x1
-#define OMAP54XX_CLKSEL_SOURCE_L3INIT_MMC1_MASK				(1 << 24)
-
-/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */
 #define OMAP54XX_CLKSEL_UTMI_P1_SHIFT					24
 #define OMAP54XX_CLKSEL_UTMI_P1_WIDTH					0x1
-#define OMAP54XX_CLKSEL_UTMI_P1_MASK					(1 << 24)
-
-/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */
 #define OMAP54XX_CLKSEL_UTMI_P2_SHIFT					25
 #define OMAP54XX_CLKSEL_UTMI_P2_WIDTH					0x1
-#define OMAP54XX_CLKSEL_UTMI_P2_MASK					(1 << 25)
-
-/*
- * Used by CM_DIV_H11_DPLL_CORE, CM_DIV_H11_DPLL_IVA, CM_DIV_H11_DPLL_PER,
- * CM_DIV_H12_DPLL_CORE, CM_DIV_H12_DPLL_IVA, CM_DIV_H12_DPLL_PER,
- * CM_DIV_H13_DPLL_CORE, CM_DIV_H13_DPLL_PER, CM_DIV_H14_DPLL_CORE,
- * CM_DIV_H14_DPLL_PER, CM_DIV_H21_DPLL_CORE, CM_DIV_H22_DPLL_CORE,
- * CM_DIV_H23_DPLL_CORE, CM_DIV_H24_DPLL_CORE, CM_DIV_M2_DPLL_ABE,
- * CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER,
- * CM_DIV_M2_DPLL_UNIPRO1, CM_DIV_M2_DPLL_UNIPRO2, CM_DIV_M2_DPLL_USB,
- * CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER
- */
-#define OMAP54XX_CLKST_SHIFT						9
-#define OMAP54XX_CLKST_WIDTH						0x1
-#define OMAP54XX_CLKST_MASK						(1 << 9)
-
-/*
- * Used by CM_ABE_CLKSTCTRL, CM_C2C_CLKSTCTRL, CM_CAM_CLKSTCTRL,
- * CM_COREAON_CLKSTCTRL, CM_CUSTEFUSE_CLKSTCTRL, CM_DMA_CLKSTCTRL,
- * CM_DSP_CLKSTCTRL, CM_DSS_CLKSTCTRL, CM_EMIF_CLKSTCTRL, CM_EMU_CLKSTCTRL,
- * CM_GPU_CLKSTCTRL, CM_IPU_CLKSTCTRL, CM_IVA_CLKSTCTRL, CM_L3INIT_CLKSTCTRL,
- * CM_L3INSTR_CLKSTCTRL, CM_L3MAIN1_CLKSTCTRL, CM_L3MAIN2_CLKSTCTRL,
- * CM_L4CFG_CLKSTCTRL, CM_L4PER_CLKSTCTRL, CM_L4SEC_CLKSTCTRL,
- * CM_MIPIEXT_CLKSTCTRL, CM_MPU_CLKSTCTRL, CM_WKUPAON_CLKSTCTRL
- */
-#define OMAP54XX_CLKTRCTRL_SHIFT					0
-#define OMAP54XX_CLKTRCTRL_WIDTH					0x2
-#define OMAP54XX_CLKTRCTRL_MASK						(0x3 << 0)
-
-/* Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_PER */
-#define OMAP54XX_CLKX2ST_SHIFT						11
-#define OMAP54XX_CLKX2ST_WIDTH						0x1
-#define OMAP54XX_CLKX2ST_MASK						(1 << 11)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP54XX_COREAON_DYNDEP_SHIFT					16
-#define OMAP54XX_COREAON_DYNDEP_WIDTH					0x1
-#define OMAP54XX_COREAON_DYNDEP_MASK					(1 << 16)
-
-/* Used by CM_DSP_STATICDEP, CM_IPU_STATICDEP, CM_MPU_STATICDEP */
-#define OMAP54XX_COREAON_STATDEP_SHIFT					16
-#define OMAP54XX_COREAON_STATDEP_WIDTH					0x1
-#define OMAP54XX_COREAON_STATDEP_MASK					(1 << 16)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP54XX_CUSTEFUSE_DYNDEP_SHIFT					17
-#define OMAP54XX_CUSTEFUSE_DYNDEP_WIDTH					0x1
-#define OMAP54XX_CUSTEFUSE_DYNDEP_MASK					(1 << 17)
-
-/* Used by CM_DSP_STATICDEP, CM_IPU_STATICDEP, CM_MPU_STATICDEP */
-#define OMAP54XX_CUSTEFUSE_STATDEP_SHIFT				17
-#define OMAP54XX_CUSTEFUSE_STATDEP_WIDTH				0x1
-#define OMAP54XX_CUSTEFUSE_STATDEP_MASK					(1 << 17)
-
-/* Used by REVISION_CM_CORE, REVISION_CM_CORE_AON */
-#define OMAP54XX_CUSTOM_SHIFT						6
-#define OMAP54XX_CUSTOM_WIDTH						0x2
-#define OMAP54XX_CUSTOM_MASK						(0x3 << 6)
-
-/*
- * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_IVA,
- * CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO1,
- * CM_CLKSEL_DPLL_UNIPRO2, CM_CLKSEL_DPLL_USB
- */
-#define OMAP54XX_DCC_EN_SHIFT						22
-#define OMAP54XX_DCC_EN_WIDTH						0x1
-#define OMAP54XX_DCC_EN_MASK						(1 << 22)
-
-/*
- * Used by CM_CORE_AON_DEBUG_CM_CORE_AON_FD_TRANS,
- * CM_CORE_AON_DEBUG_DSS_FD_TRANS, CM_CORE_AON_DEBUG_EMIF_FD_TRANS,
- * CM_CORE_AON_DEBUG_L4SEC_FD_TRANS
- */
-#define OMAP54XX_CM_DEBUG_OUT_SHIFT					0
-#define OMAP54XX_CM_DEBUG_OUT_WIDTH					0xd
-#define OMAP54XX_CM_DEBUG_OUT_MASK					(0x1fff << 0)
-
-/*
- * Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_ABE_FD_TRANS,
- * CM_CORE_AON_DEBUG_L3INIT_FD_TRANS, CM_CORE_AON_DEBUG_L4PER_FD_TRANS
- */
-#define OMAP54XX_DEBUG_OUT_0_31_SHIFT					0
-#define OMAP54XX_DEBUG_OUT_0_31_WIDTH					0x20
-#define OMAP54XX_DEBUG_OUT_0_31_MASK					(0xffffffff << 0)
-
-/*
- * Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_C2C_FD_TRANS,
- * CM_CORE_AON_DEBUG_COREAON_FD_TRANS, CM_CORE_AON_DEBUG_L4CFG_FD_TRANS
- */
-#define OMAP54XX_DEBUG_OUT_0_8_SHIFT					0
-#define OMAP54XX_DEBUG_OUT_0_8_WIDTH					0x9
-#define OMAP54XX_DEBUG_OUT_0_8_MASK					(0x1ff << 0)
-
-/*
- * Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_CUSTEFUSE_FD_TRANS,
- * CM_CORE_AON_DEBUG_DMA_FD_TRANS, CM_CORE_AON_DEBUG_L3MAIN1_FD_TRANS
- */
-#define OMAP54XX_DEBUG_OUT_0_4_SHIFT					0
-#define OMAP54XX_DEBUG_OUT_0_4_WIDTH					0x5
-#define OMAP54XX_DEBUG_OUT_0_4_MASK					(0x1f << 0)
-
-/*
- * Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_DSP_FD_TRANS,
- * CM_CORE_AON_DEBUG_IPU_FD_TRANS, CM_CORE_AON_DEBUG_MPU_FD_TRANS
- */
-#define OMAP54XX_DEBUG_OUT_0_5_SHIFT					0
-#define OMAP54XX_DEBUG_OUT_0_5_WIDTH					0x6
-#define OMAP54XX_DEBUG_OUT_0_5_MASK					(0x3f << 0)
-
-/*
- * Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_CAM_FD_TRANS,
- * CM_CORE_AON_DEBUG_MIPIEXT_FD_TRANS
- */
-#define OMAP54XX_DEBUG_OUT_0_10_SHIFT					0
-#define OMAP54XX_DEBUG_OUT_0_10_WIDTH					0xb
-#define OMAP54XX_DEBUG_OUT_0_10_MASK					(0x7ff << 0)
-
-/*
- * Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_IVA_FD_TRANS,
- * CM_CORE_AON_DEBUG_L3MAIN2_FD_TRANS
- */
-#define OMAP54XX_DEBUG_OUT_0_6_SHIFT					0
-#define OMAP54XX_DEBUG_OUT_0_6_WIDTH					0x7
-#define OMAP54XX_DEBUG_OUT_0_6_MASK					(0x7f << 0)
-
-/* Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_ABE_FD_TRANS2 */
-#define OMAP54XX_DEBUG_OUT_0_19_SHIFT					0
-#define OMAP54XX_DEBUG_OUT_0_19_WIDTH					0x14
-#define OMAP54XX_DEBUG_OUT_0_19_MASK					(0xfffff << 0)
-
-/* Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_GPU_FD_TRANS */
-#define OMAP54XX_DEBUG_OUT_0_9_SHIFT					0
-#define OMAP54XX_DEBUG_OUT_0_9_WIDTH					0xa
-#define OMAP54XX_DEBUG_OUT_0_9_MASK					(0x3ff << 0)
-
-/* Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_L3INIT_FD_TRANS2 */
-#define OMAP54XX_DEBUG_OUT_0_26_SHIFT					0
-#define OMAP54XX_DEBUG_OUT_0_26_WIDTH					0x1b
-#define OMAP54XX_DEBUG_OUT_0_26_MASK					(0x7ffffff << 0)
-
-/* Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_L3INSTR_FD_TRANS */
-#define OMAP54XX_DEBUG_OUT_0_13_SHIFT					0
-#define OMAP54XX_DEBUG_OUT_0_13_WIDTH					0xe
-#define OMAP54XX_DEBUG_OUT_0_13_MASK					(0x3fff << 0)
-
-/* Renamed from DEBUG_OUT Used by CM_CORE_AON_DEBUG_L4PER_FD_TRANS2 */
-#define OMAP54XX_DEBUG_OUT_0_21_SHIFT					0
-#define OMAP54XX_DEBUG_OUT_0_21_WIDTH					0x16
-#define OMAP54XX_DEBUG_OUT_0_21_MASK					(0x3fffff << 0)
-
-/*
- * Used by CM_SSC_DELTAMSTEP_DPLL_ABE, CM_SSC_DELTAMSTEP_DPLL_CORE,
- * CM_SSC_DELTAMSTEP_DPLL_IVA, CM_SSC_DELTAMSTEP_DPLL_MPU,
- * CM_SSC_DELTAMSTEP_DPLL_PER
- */
-#define OMAP54XX_DELTAMSTEP_SHIFT					0
-#define OMAP54XX_DELTAMSTEP_WIDTH					0x14
-#define OMAP54XX_DELTAMSTEP_MASK					(0xfffff << 0)
-
-/*
- * Renamed from DELTAMSTEP Used by CM_SSC_DELTAMSTEP_DPLL_UNIPRO1,
- * CM_SSC_DELTAMSTEP_DPLL_UNIPRO2, CM_SSC_DELTAMSTEP_DPLL_USB
- */
-#define OMAP54XX_DELTAMSTEP_0_20_SHIFT					0
-#define OMAP54XX_DELTAMSTEP_0_20_WIDTH					0x15
-#define OMAP54XX_DELTAMSTEP_0_20_MASK					(0x1fffff << 0)
-
-/*
- * Used by CM_DIV_H11_DPLL_CORE, CM_DIV_H11_DPLL_IVA, CM_DIV_H11_DPLL_PER,
- * CM_DIV_H12_DPLL_CORE, CM_DIV_H12_DPLL_IVA, CM_DIV_H12_DPLL_PER,
- * CM_DIV_H13_DPLL_CORE, CM_DIV_H13_DPLL_PER, CM_DIV_H14_DPLL_CORE,
- * CM_DIV_H14_DPLL_PER, CM_DIV_H21_DPLL_CORE, CM_DIV_H22_DPLL_CORE,
- * CM_DIV_H23_DPLL_CORE, CM_DIV_H24_DPLL_CORE
- */
-#define OMAP54XX_DIVHS_SHIFT						0
-#define OMAP54XX_DIVHS_WIDTH						0x6
 #define OMAP54XX_DIVHS_MASK						(0x3f << 0)
-
-/*
- * Renamed from DIVHS Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE,
- * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M3_DPLL_ABE,
- * CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER
- */
-#define OMAP54XX_DIVHS_0_4_SHIFT					0
-#define OMAP54XX_DIVHS_0_4_WIDTH					0x5
 #define OMAP54XX_DIVHS_0_4_MASK						(0x1f << 0)
-
-/*
- * Renamed from DIVHS Used by CM_DIV_M2_DPLL_UNIPRO1, CM_DIV_M2_DPLL_UNIPRO2,
- * CM_DIV_M2_DPLL_USB
- */
-#define OMAP54XX_DIVHS_0_6_SHIFT					0
-#define OMAP54XX_DIVHS_0_6_WIDTH					0x7
 #define OMAP54XX_DIVHS_0_6_MASK						(0x7f << 0)
-
-/* Used by CM_DLL_CTRL */
-#define OMAP54XX_DLL_OVERRIDE_SHIFT					0
-#define OMAP54XX_DLL_OVERRIDE_WIDTH					0x1
-#define OMAP54XX_DLL_OVERRIDE_MASK					(1 << 0)
-
-/* Renamed from DLL_OVERRIDE Used by CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP54XX_DLL_OVERRIDE_2_2_SHIFT					2
-#define OMAP54XX_DLL_OVERRIDE_2_2_WIDTH					0x1
-#define OMAP54XX_DLL_OVERRIDE_2_2_MASK					(1 << 2)
-
-/* Used by CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP54XX_DLL_RESET_SHIFT					3
-#define OMAP54XX_DLL_RESET_WIDTH					0x1
-#define OMAP54XX_DLL_RESET_MASK						(1 << 3)
-
-/*
- * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_IVA,
- * CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO1,
- * CM_CLKSEL_DPLL_UNIPRO2, CM_CLKSEL_DPLL_USB
- */
-#define OMAP54XX_DPLL_BYP_CLKSEL_SHIFT					23
-#define OMAP54XX_DPLL_BYP_CLKSEL_WIDTH					0x1
-#define OMAP54XX_DPLL_BYP_CLKSEL_MASK					(1 << 23)
-
-/* Used by CM_CLKSEL_DPLL_CORE */
-#define OMAP54XX_DPLL_CLKOUTHIF_CLKSEL_SHIFT				20
-#define OMAP54XX_DPLL_CLKOUTHIF_CLKSEL_WIDTH				0x1
-#define OMAP54XX_DPLL_CLKOUTHIF_CLKSEL_MASK				(1 << 20)
-
-/* Used by CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP54XX_DPLL_CORE_DPLL_EN_SHIFT				8
-#define OMAP54XX_DPLL_CORE_DPLL_EN_WIDTH				0x3
-#define OMAP54XX_DPLL_CORE_DPLL_EN_MASK					(0x7 << 8)
-
-/* Used by CM_SHADOW_FREQ_CONFIG2 */
-#define OMAP54XX_DPLL_CORE_H12_DIV_SHIFT				2
-#define OMAP54XX_DPLL_CORE_H12_DIV_WIDTH				0x6
-#define OMAP54XX_DPLL_CORE_H12_DIV_MASK					(0x3f << 2)
-
-/* Used by CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP54XX_DPLL_CORE_M2_DIV_SHIFT					11
-#define OMAP54XX_DPLL_CORE_M2_DIV_WIDTH					0x5
-#define OMAP54XX_DPLL_CORE_M2_DIV_MASK					(0x1f << 11)
-
-/*
- * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_IVA,
- * CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER
- */
-#define OMAP54XX_DPLL_DIV_SHIFT						0
-#define OMAP54XX_DPLL_DIV_WIDTH						0x7
 #define OMAP54XX_DPLL_DIV_MASK						(0x7f << 0)
-
-/*
- * Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_UNIPRO1,
- * CM_CLKSEL_DPLL_UNIPRO2, CM_CLKSEL_DPLL_USB
- */
-#define OMAP54XX_DPLL_DIV_0_7_SHIFT					0
-#define OMAP54XX_DPLL_DIV_0_7_WIDTH					0x8
-#define OMAP54XX_DPLL_DIV_0_7_MASK					(0xff << 0)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_IVA,
- * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
- */
-#define OMAP54XX_DPLL_DRIFTGUARD_EN_SHIFT				8
-#define OMAP54XX_DPLL_DRIFTGUARD_EN_WIDTH				0x1
-#define OMAP54XX_DPLL_DRIFTGUARD_EN_MASK				(1 << 8)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_IVA,
- * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO1,
- * CM_CLKMODE_DPLL_UNIPRO2, CM_CLKMODE_DPLL_USB
- */
-#define OMAP54XX_DPLL_EN_SHIFT						0
-#define OMAP54XX_DPLL_EN_WIDTH						0x3
 #define OMAP54XX_DPLL_EN_MASK						(0x7 << 0)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_IVA,
- * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
- */
-#define OMAP54XX_DPLL_LPMODE_EN_SHIFT					10
-#define OMAP54XX_DPLL_LPMODE_EN_WIDTH					0x1
 #define OMAP54XX_DPLL_LPMODE_EN_MASK					(1 << 10)
-
-/*
- * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_IVA,
- * CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER
- */
-#define OMAP54XX_DPLL_MULT_SHIFT					8
-#define OMAP54XX_DPLL_MULT_WIDTH					0xb
 #define OMAP54XX_DPLL_MULT_MASK						(0x7ff << 8)
-
-/*
- * Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_UNIPRO1,
- * CM_CLKSEL_DPLL_UNIPRO2, CM_CLKSEL_DPLL_USB
- */
-#define OMAP54XX_DPLL_MULT_UNIPRO1_SHIFT				8
-#define OMAP54XX_DPLL_MULT_UNIPRO1_WIDTH				0xc
-#define OMAP54XX_DPLL_MULT_UNIPRO1_MASK					(0xfff << 8)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_IVA,
- * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
- */
-#define OMAP54XX_DPLL_REGM4XEN_SHIFT					11
-#define OMAP54XX_DPLL_REGM4XEN_WIDTH					0x1
 #define OMAP54XX_DPLL_REGM4XEN_MASK					(1 << 11)
-
-/* Used by CM_CLKSEL_DPLL_UNIPRO1, CM_CLKSEL_DPLL_UNIPRO2, CM_CLKSEL_DPLL_USB */
-#define OMAP54XX_DPLL_SD_DIV_SHIFT					24
-#define OMAP54XX_DPLL_SD_DIV_WIDTH					0x8
 #define OMAP54XX_DPLL_SD_DIV_MASK					(0xff << 24)
-
-/* Used by CM_CLKSEL_DPLL_UNIPRO1, CM_CLKSEL_DPLL_UNIPRO2, CM_CLKSEL_DPLL_USB */
-#define OMAP54XX_DPLL_SELFREQDCO_SHIFT					21
-#define OMAP54XX_DPLL_SELFREQDCO_WIDTH					0x1
-#define OMAP54XX_DPLL_SELFREQDCO_MASK					(1 << 21)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_IVA,
- * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO1,
- * CM_CLKMODE_DPLL_UNIPRO2, CM_CLKMODE_DPLL_USB
- */
-#define OMAP54XX_DPLL_SSC_ACK_SHIFT					13
-#define OMAP54XX_DPLL_SSC_ACK_WIDTH					0x1
-#define OMAP54XX_DPLL_SSC_ACK_MASK					(1 << 13)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_IVA,
- * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO1,
- * CM_CLKMODE_DPLL_UNIPRO2, CM_CLKMODE_DPLL_USB
- */
-#define OMAP54XX_DPLL_SSC_DOWNSPREAD_SHIFT				14
-#define OMAP54XX_DPLL_SSC_DOWNSPREAD_WIDTH				0x1
-#define OMAP54XX_DPLL_SSC_DOWNSPREAD_MASK				(1 << 14)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_IVA,
- * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO1,
- * CM_CLKMODE_DPLL_UNIPRO2, CM_CLKMODE_DPLL_USB
- */
-#define OMAP54XX_DPLL_SSC_EN_SHIFT					12
-#define OMAP54XX_DPLL_SSC_EN_WIDTH					0x1
-#define OMAP54XX_DPLL_SSC_EN_MASK					(1 << 12)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP54XX_DSP_DYNDEP_SHIFT					1
-#define OMAP54XX_DSP_DYNDEP_WIDTH					0x1
-#define OMAP54XX_DSP_DYNDEP_MASK					(1 << 1)
-
-/* Used by CM_IPU_STATICDEP, CM_MPU_STATICDEP */
 #define OMAP54XX_DSP_STATDEP_SHIFT					1
-#define OMAP54XX_DSP_STATDEP_WIDTH					0x1
-#define OMAP54XX_DSP_STATDEP_MASK					(1 << 1)
-
-/* Used by CM_L3MAIN2_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
-#define OMAP54XX_DSS_DYNDEP_SHIFT					8
-#define OMAP54XX_DSS_DYNDEP_WIDTH					0x1
-#define OMAP54XX_DSS_DYNDEP_MASK					(1 << 8)
-
-/* Used by CM_DMA_STATICDEP, CM_IPU_STATICDEP, CM_MPU_STATICDEP */
 #define OMAP54XX_DSS_STATDEP_SHIFT					8
-#define OMAP54XX_DSS_STATDEP_WIDTH					0x1
-#define OMAP54XX_DSS_STATDEP_MASK					(1 << 8)
-
-/*
- * Used by CM_C2C_DYNAMICDEP, CM_L3MAIN1_DYNAMICDEP, CM_L4CFG_DYNAMICDEP,
- * CM_MIPIEXT_DYNAMICDEP, CM_MPU_DYNAMICDEP
- */
-#define OMAP54XX_EMIF_DYNDEP_SHIFT					4
-#define OMAP54XX_EMIF_DYNDEP_WIDTH					0x1
-#define OMAP54XX_EMIF_DYNDEP_MASK					(1 << 4)
-
-/*
- * Used by CM_C2C_STATICDEP, CM_CAM_STATICDEP, CM_DMA_STATICDEP,
- * CM_DSP_STATICDEP, CM_DSS_STATICDEP, CM_GPU_STATICDEP, CM_IPU_STATICDEP,
- * CM_IVA_STATICDEP, CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP,
- * CM_MIPIEXT_STATICDEP, CM_MPU_STATICDEP
- */
 #define OMAP54XX_EMIF_STATDEP_SHIFT					4
-#define OMAP54XX_EMIF_STATDEP_WIDTH					0x1
-#define OMAP54XX_EMIF_STATDEP_MASK					(1 << 4)
-
-/* Used by CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP54XX_FREQ_UPDATE_SHIFT					0
-#define OMAP54XX_FREQ_UPDATE_WIDTH					0x1
-#define OMAP54XX_FREQ_UPDATE_MASK					(1 << 0)
-
-/* Used by REVISION_CM_CORE, REVISION_CM_CORE_AON */
-#define OMAP54XX_FUNC_SHIFT						16
-#define OMAP54XX_FUNC_WIDTH						0xc
-#define OMAP54XX_FUNC_MASK						(0xfff << 16)
-
-/* Used by CM_SHADOW_FREQ_CONFIG2 */
-#define OMAP54XX_GPMC_FREQ_UPDATE_SHIFT					0
-#define OMAP54XX_GPMC_FREQ_UPDATE_WIDTH					0x1
-#define OMAP54XX_GPMC_FREQ_UPDATE_MASK					(1 << 0)
-
-/* Used by CM_L3MAIN2_DYNAMICDEP */
-#define OMAP54XX_GPU_DYNDEP_SHIFT					10
-#define OMAP54XX_GPU_DYNDEP_WIDTH					0x1
-#define OMAP54XX_GPU_DYNDEP_MASK					(1 << 10)
-
-/* Used by CM_IPU_STATICDEP, CM_MPU_STATICDEP */
 #define OMAP54XX_GPU_STATDEP_SHIFT					10
-#define OMAP54XX_GPU_STATDEP_WIDTH					0x1
-#define OMAP54XX_GPU_STATDEP_MASK					(1 << 10)
-
-/*
- * Used by CM_ABE_AESS_CLKCTRL, CM_ABE_DMIC_CLKCTRL, CM_ABE_L4_ABE_CLKCTRL,
- * CM_ABE_MCASP_CLKCTRL, CM_ABE_MCBSP1_CLKCTRL, CM_ABE_MCBSP2_CLKCTRL,
- * CM_ABE_MCBSP3_CLKCTRL, CM_ABE_MCPDM_CLKCTRL, CM_ABE_SLIMBUS1_CLKCTRL,
- * CM_ABE_TIMER5_CLKCTRL, CM_ABE_TIMER6_CLKCTRL, CM_ABE_TIMER7_CLKCTRL,
- * CM_ABE_TIMER8_CLKCTRL, CM_ABE_WD_TIMER3_CLKCTRL, CM_C2C_C2C_CLKCTRL,
- * CM_C2C_C2C_OCP_FW_CLKCTRL, CM_C2C_MODEM_ICR_CLKCTRL, CM_CAM_CAL_CLKCTRL,
- * CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL, CM_CM_CORE_AON_PROFILING_CLKCTRL,
- * CM_CM_CORE_PROFILING_CLKCTRL, CM_COREAON_SMARTREFLEX_CORE_CLKCTRL,
- * CM_COREAON_SMARTREFLEX_MM_CLKCTRL, CM_COREAON_SMARTREFLEX_MPU_CLKCTRL,
- * CM_CUSTEFUSE_EFUSE_CTRL_CUST_CLKCTRL, CM_DMA_DMA_SYSTEM_CLKCTRL,
- * CM_DSP_DSP_CLKCTRL, CM_DSS_BB2D_CLKCTRL, CM_DSS_DSS_CLKCTRL,
- * CM_EMIF_DMM_CLKCTRL, CM_EMIF_EMIF1_CLKCTRL, CM_EMIF_EMIF2_CLKCTRL,
- * CM_EMIF_EMIF_OCP_FW_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL,
- * CM_EMU_MPU_EMU_DBG_CLKCTRL, CM_GPU_GPU_CLKCTRL, CM_IPU_IPU_CLKCTRL,
- * CM_IVA_IVA_CLKCTRL, CM_IVA_SL2_CLKCTRL, CM_L3INIT_HSI_CLKCTRL,
- * CM_L3INIT_IEEE1500_2_OCP_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL,
- * CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_MPHY_UNIPRO2_CLKCTRL,
- * CM_L3INIT_OCP2SCP1_CLKCTRL, CM_L3INIT_OCP2SCP3_CLKCTRL,
- * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_UNIPRO2_CLKCTRL,
- * CM_L3INIT_USB_HOST_HS_CLKCTRL, CM_L3INIT_USB_OTG_SS_CLKCTRL,
- * CM_L3INIT_USB_TLL_HS_CLKCTRL, CM_L3INSTR_CTRL_MODULE_BANDGAP_CLKCTRL,
- * CM_L3INSTR_DLL_AGING_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL,
- * CM_L3INSTR_L3_MAIN_3_CLKCTRL, CM_L3INSTR_OCP_WP_NOC_CLKCTRL,
- * CM_L3MAIN1_L3_MAIN_1_CLKCTRL, CM_L3MAIN2_GPMC_CLKCTRL,
- * CM_L3MAIN2_L3_MAIN_2_CLKCTRL, CM_L3MAIN2_OCMC_RAM_CLKCTRL,
- * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL,
- * CM_L4CFG_OCP2SCP2_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL,
- * CM_L4CFG_SPINLOCK_CLKCTRL, CM_L4PER_ELM_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL,
- * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL,
- * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_GPIO7_CLKCTRL, CM_L4PER_GPIO8_CLKCTRL,
- * CM_L4PER_HDQ1W_CLKCTRL, CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL,
- * CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL,
- * CM_L4PER_L4_PER_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL,
- * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MMC3_CLKCTRL,
- * CM_L4PER_MMC4_CLKCTRL, CM_L4PER_MMC5_CLKCTRL, CM_L4PER_TIMER10_CLKCTRL,
- * CM_L4PER_TIMER11_CLKCTRL, CM_L4PER_TIMER2_CLKCTRL, CM_L4PER_TIMER3_CLKCTRL,
- * CM_L4PER_TIMER4_CLKCTRL, CM_L4PER_TIMER9_CLKCTRL, CM_L4PER_UART1_CLKCTRL,
- * CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL,
- * CM_L4PER_UART5_CLKCTRL, CM_L4PER_UART6_CLKCTRL, CM_L4SEC_AES1_CLKCTRL,
- * CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL,
- * CM_L4SEC_DMA_CRYPTO_CLKCTRL, CM_L4SEC_FPKA_CLKCTRL, CM_L4SEC_RNG_CLKCTRL,
- * CM_L4SEC_SHA2MD5_CLKCTRL, CM_MIPIEXT_LLI_CLKCTRL,
- * CM_MIPIEXT_LLI_OCP_FW_CLKCTRL, CM_MIPIEXT_MPHY_CLKCTRL, CM_MPU_MPU_CLKCTRL,
- * CM_MPU_MPU_MPU_DBG_CLKCTRL, CM_WKUPAON_COUNTER_32K_CLKCTRL,
- * CM_WKUPAON_GPIO1_CLKCTRL, CM_WKUPAON_KBD_CLKCTRL,
- * CM_WKUPAON_L4_WKUP_CLKCTRL, CM_WKUPAON_SAR_RAM_CLKCTRL,
- * CM_WKUPAON_TIMER12_CLKCTRL, CM_WKUPAON_TIMER1_CLKCTRL,
- * CM_WKUPAON_WD_TIMER1_CLKCTRL, CM_WKUPAON_WD_TIMER2_CLKCTRL
- */
-#define OMAP54XX_IDLEST_SHIFT						16
-#define OMAP54XX_IDLEST_WIDTH						0x2
-#define OMAP54XX_IDLEST_MASK						(0x3 << 16)
-
-/* Used by CM_L3MAIN2_DYNAMICDEP */
-#define OMAP54XX_IPU_DYNDEP_SHIFT					0
-#define OMAP54XX_IPU_DYNDEP_WIDTH					0x1
-#define OMAP54XX_IPU_DYNDEP_MASK					(1 << 0)
-
-/* Used by CM_DMA_STATICDEP, CM_MPU_STATICDEP */
 #define OMAP54XX_IPU_STATDEP_SHIFT					0
-#define OMAP54XX_IPU_STATDEP_WIDTH					0x1
-#define OMAP54XX_IPU_STATDEP_MASK					(1 << 0)
-
-/* Used by CM_DSP_DYNAMICDEP, CM_L3MAIN2_DYNAMICDEP */
-#define OMAP54XX_IVA_DYNDEP_SHIFT					2
-#define OMAP54XX_IVA_DYNDEP_WIDTH					0x1
-#define OMAP54XX_IVA_DYNDEP_MASK					(1 << 2)
-
-/*
- * Used by CM_C2C_STATICDEP, CM_CAM_STATICDEP, CM_DMA_STATICDEP,
- * CM_DSP_STATICDEP, CM_DSS_STATICDEP, CM_GPU_STATICDEP, CM_IPU_STATICDEP,
- * CM_L3INIT_STATICDEP, CM_MIPIEXT_STATICDEP, CM_MPU_STATICDEP
- */
 #define OMAP54XX_IVA_STATDEP_SHIFT					2
-#define OMAP54XX_IVA_STATDEP_WIDTH					0x1
-#define OMAP54XX_IVA_STATDEP_MASK					(1 << 2)
-
-/* Used by CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
-#define OMAP54XX_L3INIT_DYNDEP_SHIFT					7
-#define OMAP54XX_L3INIT_DYNDEP_WIDTH					0x1
-#define OMAP54XX_L3INIT_DYNDEP_MASK					(1 << 7)
-
-/*
- * Used by CM_C2C_STATICDEP, CM_DMA_STATICDEP, CM_DSP_STATICDEP,
- * CM_IPU_STATICDEP, CM_MIPIEXT_STATICDEP, CM_MPU_STATICDEP
- */
 #define OMAP54XX_L3INIT_STATDEP_SHIFT					7
-#define OMAP54XX_L3INIT_STATDEP_WIDTH					0x1
-#define OMAP54XX_L3INIT_STATDEP_MASK					(1 << 7)
-
-/*
- * Used by CM_DSP_DYNAMICDEP, CM_DSS_DYNAMICDEP, CM_L3INIT_DYNAMICDEP,
- * CM_L3MAIN2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_MPU_DYNAMICDEP
- */
-#define OMAP54XX_L3MAIN1_DYNDEP_SHIFT					5
-#define OMAP54XX_L3MAIN1_DYNDEP_WIDTH					0x1
-#define OMAP54XX_L3MAIN1_DYNDEP_MASK					(1 << 5)
-
-/*
- * Used by CM_C2C_STATICDEP, CM_CAM_STATICDEP, CM_DMA_STATICDEP,
- * CM_DSP_STATICDEP, CM_DSS_STATICDEP, CM_GPU_STATICDEP, CM_IPU_STATICDEP,
- * CM_IVA_STATICDEP, CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP,
- * CM_MIPIEXT_STATICDEP, CM_MPU_STATICDEP
- */
 #define OMAP54XX_L3MAIN1_STATDEP_SHIFT					5
-#define OMAP54XX_L3MAIN1_STATDEP_WIDTH					0x1
-#define OMAP54XX_L3MAIN1_STATDEP_MASK					(1 << 5)
-
-/*
- * Used by CM_C2C_DYNAMICDEP, CM_CAM_DYNAMICDEP, CM_DMA_DYNAMICDEP,
- * CM_DSS_DYNAMICDEP, CM_EMU_DYNAMICDEP, CM_GPU_DYNAMICDEP, CM_IPU_DYNAMICDEP,
- * CM_IVA_DYNAMICDEP, CM_L3INIT_DYNAMICDEP, CM_L3MAIN1_DYNAMICDEP,
- * CM_L4CFG_DYNAMICDEP, CM_L4SEC_DYNAMICDEP, CM_MIPIEXT_DYNAMICDEP
- */
-#define OMAP54XX_L3MAIN2_DYNDEP_SHIFT					6
-#define OMAP54XX_L3MAIN2_DYNDEP_WIDTH					0x1
-#define OMAP54XX_L3MAIN2_DYNDEP_MASK					(1 << 6)
-
-/*
- * Used by CM_C2C_STATICDEP, CM_CAM_STATICDEP, CM_DMA_STATICDEP,
- * CM_DSP_STATICDEP, CM_DSS_STATICDEP, CM_GPU_STATICDEP, CM_IPU_STATICDEP,
- * CM_IVA_STATICDEP, CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP,
- * CM_MIPIEXT_STATICDEP, CM_MPU_STATICDEP
- */
 #define OMAP54XX_L3MAIN2_STATDEP_SHIFT					6
-#define OMAP54XX_L3MAIN2_STATDEP_WIDTH					0x1
-#define OMAP54XX_L3MAIN2_STATDEP_MASK					(1 << 6)
-
-/* Used by CM_L3MAIN1_DYNAMICDEP */
-#define OMAP54XX_L4CFG_DYNDEP_SHIFT					12
-#define OMAP54XX_L4CFG_DYNDEP_WIDTH					0x1
-#define OMAP54XX_L4CFG_DYNDEP_MASK					(1 << 12)
-
-/*
- * Used by CM_C2C_STATICDEP, CM_DMA_STATICDEP, CM_DSP_STATICDEP,
- * CM_IPU_STATICDEP, CM_L3INIT_STATICDEP, CM_MIPIEXT_STATICDEP, CM_MPU_STATICDEP
- */
 #define OMAP54XX_L4CFG_STATDEP_SHIFT					12
-#define OMAP54XX_L4CFG_STATDEP_WIDTH					0x1
-#define OMAP54XX_L4CFG_STATDEP_MASK					(1 << 12)
-
-/* Used by CM_L3MAIN2_DYNAMICDEP */
-#define OMAP54XX_L4PER_DYNDEP_SHIFT					13
-#define OMAP54XX_L4PER_DYNDEP_WIDTH					0x1
-#define OMAP54XX_L4PER_DYNDEP_MASK					(1 << 13)
-
-/*
- * Used by CM_C2C_STATICDEP, CM_DMA_STATICDEP, CM_DSP_STATICDEP,
- * CM_IPU_STATICDEP, CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP,
- * CM_MIPIEXT_STATICDEP, CM_MPU_STATICDEP
- */
 #define OMAP54XX_L4PER_STATDEP_SHIFT					13
-#define OMAP54XX_L4PER_STATDEP_WIDTH					0x1
-#define OMAP54XX_L4PER_STATDEP_MASK					(1 << 13)
-
-/* Used by CM_L3MAIN2_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
-#define OMAP54XX_L4SEC_DYNDEP_SHIFT					14
-#define OMAP54XX_L4SEC_DYNDEP_WIDTH					0x1
-#define OMAP54XX_L4SEC_DYNDEP_MASK					(1 << 14)
-
-/*
- * Used by CM_DMA_STATICDEP, CM_IPU_STATICDEP, CM_L3INIT_STATICDEP,
- * CM_MPU_STATICDEP
- */
 #define OMAP54XX_L4SEC_STATDEP_SHIFT					14
-#define OMAP54XX_L4SEC_STATDEP_WIDTH					0x1
-#define OMAP54XX_L4SEC_STATDEP_MASK					(1 << 14)
-
-/* Used by CM_L3MAIN2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
-#define OMAP54XX_MIPIEXT_DYNDEP_SHIFT					21
-#define OMAP54XX_MIPIEXT_DYNDEP_WIDTH					0x1
-#define OMAP54XX_MIPIEXT_DYNDEP_MASK					(1 << 21)
-
-/* Used by CM_MPU_STATICDEP */
-#define OMAP54XX_MIPIEXT_STATDEP_SHIFT					21
-#define OMAP54XX_MIPIEXT_STATDEP_WIDTH					0x1
-#define OMAP54XX_MIPIEXT_STATDEP_MASK					(1 << 21)
-
-/*
- * Used by CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE,
- * CM_SSC_MODFREQDIV_DPLL_IVA, CM_SSC_MODFREQDIV_DPLL_MPU,
- * CM_SSC_MODFREQDIV_DPLL_PER, CM_SSC_MODFREQDIV_DPLL_UNIPRO1,
- * CM_SSC_MODFREQDIV_DPLL_UNIPRO2, CM_SSC_MODFREQDIV_DPLL_USB
- */
-#define OMAP54XX_MODFREQDIV_EXPONENT_SHIFT				8
-#define OMAP54XX_MODFREQDIV_EXPONENT_WIDTH				0x3
-#define OMAP54XX_MODFREQDIV_EXPONENT_MASK				(0x7 << 8)
-
-/*
- * Used by CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE,
- * CM_SSC_MODFREQDIV_DPLL_IVA, CM_SSC_MODFREQDIV_DPLL_MPU,
- * CM_SSC_MODFREQDIV_DPLL_PER, CM_SSC_MODFREQDIV_DPLL_UNIPRO1,
- * CM_SSC_MODFREQDIV_DPLL_UNIPRO2, CM_SSC_MODFREQDIV_DPLL_USB
- */
-#define OMAP54XX_MODFREQDIV_MANTISSA_SHIFT				0
-#define OMAP54XX_MODFREQDIV_MANTISSA_WIDTH				0x7
-#define OMAP54XX_MODFREQDIV_MANTISSA_MASK				(0x7f << 0)
-
-/*
- * Used by CM_ABE_AESS_CLKCTRL, CM_ABE_DMIC_CLKCTRL, CM_ABE_L4_ABE_CLKCTRL,
- * CM_ABE_MCASP_CLKCTRL, CM_ABE_MCBSP1_CLKCTRL, CM_ABE_MCBSP2_CLKCTRL,
- * CM_ABE_MCBSP3_CLKCTRL, CM_ABE_MCPDM_CLKCTRL, CM_ABE_SLIMBUS1_CLKCTRL,
- * CM_ABE_TIMER5_CLKCTRL, CM_ABE_TIMER6_CLKCTRL, CM_ABE_TIMER7_CLKCTRL,
- * CM_ABE_TIMER8_CLKCTRL, CM_ABE_WD_TIMER3_CLKCTRL, CM_C2C_C2C_CLKCTRL,
- * CM_C2C_C2C_OCP_FW_CLKCTRL, CM_C2C_MODEM_ICR_CLKCTRL, CM_CAM_CAL_CLKCTRL,
- * CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL, CM_CM_CORE_AON_PROFILING_CLKCTRL,
- * CM_CM_CORE_PROFILING_CLKCTRL, CM_COREAON_SMARTREFLEX_CORE_CLKCTRL,
- * CM_COREAON_SMARTREFLEX_MM_CLKCTRL, CM_COREAON_SMARTREFLEX_MPU_CLKCTRL,
- * CM_CUSTEFUSE_EFUSE_CTRL_CUST_CLKCTRL, CM_DMA_DMA_SYSTEM_CLKCTRL,
- * CM_DSP_DSP_CLKCTRL, CM_DSS_BB2D_CLKCTRL, CM_DSS_DSS_CLKCTRL,
- * CM_EMIF_DMM_CLKCTRL, CM_EMIF_EMIF1_CLKCTRL, CM_EMIF_EMIF2_CLKCTRL,
- * CM_EMIF_EMIF_OCP_FW_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL,
- * CM_EMU_MPU_EMU_DBG_CLKCTRL, CM_GPU_GPU_CLKCTRL, CM_IPU_IPU_CLKCTRL,
- * CM_IVA_IVA_CLKCTRL, CM_IVA_SL2_CLKCTRL, CM_L3INIT_HSI_CLKCTRL,
- * CM_L3INIT_IEEE1500_2_OCP_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL,
- * CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_MPHY_UNIPRO2_CLKCTRL,
- * CM_L3INIT_OCP2SCP1_CLKCTRL, CM_L3INIT_OCP2SCP3_CLKCTRL,
- * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_UNIPRO2_CLKCTRL,
- * CM_L3INIT_USB_HOST_HS_CLKCTRL, CM_L3INIT_USB_OTG_SS_CLKCTRL,
- * CM_L3INIT_USB_TLL_HS_CLKCTRL, CM_L3INSTR_CTRL_MODULE_BANDGAP_CLKCTRL,
- * CM_L3INSTR_DLL_AGING_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL,
- * CM_L3INSTR_L3_MAIN_3_CLKCTRL, CM_L3INSTR_OCP_WP_NOC_CLKCTRL,
- * CM_L3MAIN1_L3_MAIN_1_CLKCTRL, CM_L3MAIN2_GPMC_CLKCTRL,
- * CM_L3MAIN2_L3_MAIN_2_CLKCTRL, CM_L3MAIN2_OCMC_RAM_CLKCTRL,
- * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL,
- * CM_L4CFG_OCP2SCP2_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL,
- * CM_L4CFG_SPINLOCK_CLKCTRL, CM_L4PER_ELM_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL,
- * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL,
- * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_GPIO7_CLKCTRL, CM_L4PER_GPIO8_CLKCTRL,
- * CM_L4PER_HDQ1W_CLKCTRL, CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL,
- * CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL,
- * CM_L4PER_L4_PER_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL,
- * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MMC3_CLKCTRL,
- * CM_L4PER_MMC4_CLKCTRL, CM_L4PER_MMC5_CLKCTRL, CM_L4PER_TIMER10_CLKCTRL,
- * CM_L4PER_TIMER11_CLKCTRL, CM_L4PER_TIMER2_CLKCTRL, CM_L4PER_TIMER3_CLKCTRL,
- * CM_L4PER_TIMER4_CLKCTRL, CM_L4PER_TIMER9_CLKCTRL, CM_L4PER_UART1_CLKCTRL,
- * CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL,
- * CM_L4PER_UART5_CLKCTRL, CM_L4PER_UART6_CLKCTRL, CM_L4SEC_AES1_CLKCTRL,
- * CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL,
- * CM_L4SEC_DMA_CRYPTO_CLKCTRL, CM_L4SEC_FPKA_CLKCTRL, CM_L4SEC_RNG_CLKCTRL,
- * CM_L4SEC_SHA2MD5_CLKCTRL, CM_MIPIEXT_LLI_CLKCTRL,
- * CM_MIPIEXT_LLI_OCP_FW_CLKCTRL, CM_MIPIEXT_MPHY_CLKCTRL, CM_MPU_MPU_CLKCTRL,
- * CM_MPU_MPU_MPU_DBG_CLKCTRL, CM_WKUPAON_COUNTER_32K_CLKCTRL,
- * CM_WKUPAON_GPIO1_CLKCTRL, CM_WKUPAON_KBD_CLKCTRL,
- * CM_WKUPAON_L4_WKUP_CLKCTRL, CM_WKUPAON_SAR_RAM_CLKCTRL,
- * CM_WKUPAON_TIMER12_CLKCTRL, CM_WKUPAON_TIMER1_CLKCTRL,
- * CM_WKUPAON_WD_TIMER1_CLKCTRL, CM_WKUPAON_WD_TIMER2_CLKCTRL
- */
-#define OMAP54XX_MODULEMODE_SHIFT					0
-#define OMAP54XX_MODULEMODE_WIDTH					0x2
-#define OMAP54XX_MODULEMODE_MASK					(0x3 << 0)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP54XX_MPU_DYNDEP_SHIFT					19
-#define OMAP54XX_MPU_DYNDEP_WIDTH					0x1
-#define OMAP54XX_MPU_DYNDEP_MASK					(1 << 19)
-
-/* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_32KHZ_CLK_SHIFT				11
-#define OMAP54XX_OPTFCLKEN_32KHZ_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_32KHZ_CLK_MASK				(1 << 11)
-
-/* Renamed from OPTFCLKEN_32KHZ_CLK Used by CM_L3INIT_MMC1_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_32KHZ_CLK_8_8_SHIFT				8
-#define OMAP54XX_OPTFCLKEN_32KHZ_CLK_8_8_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_32KHZ_CLK_8_8_MASK				(1 << 8)
-
-/* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_48MHZ_CLK_SHIFT				9
-#define OMAP54XX_OPTFCLKEN_48MHZ_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_48MHZ_CLK_MASK				(1 << 9)
-
-/* Used by CM_COREAON_USB_PHY_CORE_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_CLK32K_SHIFT					8
-#define OMAP54XX_OPTFCLKEN_CLK32K_WIDTH					0x1
-#define OMAP54XX_OPTFCLKEN_CLK32K_MASK					(1 << 8)
-
-/* Used by CM_CAM_ISS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_CTRLCLK_SHIFT				8
-#define OMAP54XX_OPTFCLKEN_CTRLCLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_CTRLCLK_MASK					(1 << 8)
-
-/*
- * Used by CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL,
- * CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL,
- * CM_L4PER_GPIO7_CLKCTRL, CM_L4PER_GPIO8_CLKCTRL, CM_WKUPAON_GPIO1_CLKCTRL
- */
 #define OMAP54XX_OPTFCLKEN_DBCLK_SHIFT					8
-#define OMAP54XX_OPTFCLKEN_DBCLK_WIDTH					0x1
-#define OMAP54XX_OPTFCLKEN_DBCLK_MASK					(1 << 8)
-
-/* Used by CM_EMIF_EMIF_DLL_CLKCTRL */
-#define OMAP54XX_OPTFCLKEN_DLL_CLK_SHIFT				8
-#define OMAP54XX_OPTFCLKEN_DLL_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_DLL_CLK_MASK					(1 << 8)
-
-/* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_DSSCLK_SHIFT					8
-#define OMAP54XX_OPTFCLKEN_DSSCLK_WIDTH					0x1
-#define OMAP54XX_OPTFCLKEN_DSSCLK_MASK					(1 << 8)
-
-/* Used by CM_ABE_SLIMBUS1_CLKCTRL */
-#define OMAP54XX_OPTFCLKEN_FCLK0_SHIFT					8
-#define OMAP54XX_OPTFCLKEN_FCLK0_WIDTH					0x1
-#define OMAP54XX_OPTFCLKEN_FCLK0_MASK					(1 << 8)
-
-/* Used by CM_ABE_SLIMBUS1_CLKCTRL */
-#define OMAP54XX_OPTFCLKEN_FCLK1_SHIFT					9
-#define OMAP54XX_OPTFCLKEN_FCLK1_WIDTH					0x1
-#define OMAP54XX_OPTFCLKEN_FCLK1_MASK					(1 << 9)
-
-/* Used by CM_ABE_SLIMBUS1_CLKCTRL */
-#define OMAP54XX_OPTFCLKEN_FCLK2_SHIFT					10
-#define OMAP54XX_OPTFCLKEN_FCLK2_WIDTH					0x1
-#define OMAP54XX_OPTFCLKEN_FCLK2_MASK					(1 << 10)
-
-/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */
-#define OMAP54XX_OPTFCLKEN_FUNC48M_CLK_SHIFT				15
-#define OMAP54XX_OPTFCLKEN_FUNC48M_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_FUNC48M_CLK_MASK				(1 << 15)
-
-/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT			13
-#define OMAP54XX_OPTFCLKEN_HSIC480M_P1_CLK_WIDTH			0x1
-#define OMAP54XX_OPTFCLKEN_HSIC480M_P1_CLK_MASK				(1 << 13)
-
-/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT			14
-#define OMAP54XX_OPTFCLKEN_HSIC480M_P2_CLK_WIDTH			0x1
-#define OMAP54XX_OPTFCLKEN_HSIC480M_P2_CLK_MASK				(1 << 14)
-
-/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_HSIC480M_P3_CLK_SHIFT			7
-#define OMAP54XX_OPTFCLKEN_HSIC480M_P3_CLK_WIDTH			0x1
-#define OMAP54XX_OPTFCLKEN_HSIC480M_P3_CLK_MASK				(1 << 7)
-
-/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT				11
-#define OMAP54XX_OPTFCLKEN_HSIC60M_P1_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_HSIC60M_P1_CLK_MASK				(1 << 11)
-
-/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT				12
-#define OMAP54XX_OPTFCLKEN_HSIC60M_P2_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_HSIC60M_P2_CLK_MASK				(1 << 12)
-
-/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_HSIC60M_P3_CLK_SHIFT				6
-#define OMAP54XX_OPTFCLKEN_HSIC60M_P3_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_HSIC60M_P3_CLK_MASK				(1 << 6)
-
-/* Used by CM_L3INIT_USB_OTG_SS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_REFCLK960M_SHIFT				8
-#define OMAP54XX_OPTFCLKEN_REFCLK960M_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_REFCLK960M_MASK				(1 << 8)
-
-/* Used by CM_L3INIT_SATA_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_REF_CLK_SHIFT				8
-#define OMAP54XX_OPTFCLKEN_REF_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_REF_CLK_MASK					(1 << 8)
-
-/* Used by CM_WKUPAON_SCRM_CLKCTRL */
-#define OMAP54XX_OPTFCLKEN_SCRM_CORE_SHIFT				8
-#define OMAP54XX_OPTFCLKEN_SCRM_CORE_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_SCRM_CORE_MASK				(1 << 8)
-
-/* Used by CM_WKUPAON_SCRM_CLKCTRL */
-#define OMAP54XX_OPTFCLKEN_SCRM_PER_SHIFT				9
-#define OMAP54XX_OPTFCLKEN_SCRM_PER_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_SCRM_PER_MASK				(1 << 9)
-
-/* Used by CM_ABE_SLIMBUS1_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_SLIMBUS_CLK_SHIFT				11
-#define OMAP54XX_OPTFCLKEN_SLIMBUS_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_SLIMBUS_CLK_MASK				(1 << 11)
-
-/* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_SYS_CLK_SHIFT				10
-#define OMAP54XX_OPTFCLKEN_SYS_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_SYS_CLK_MASK					(1 << 10)
-
-/* Used by CM_MIPIEXT_LLI_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_TXPHY_CLK_SHIFT				8
-#define OMAP54XX_OPTFCLKEN_TXPHY_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_TXPHY_CLK_MASK				(1 << 8)
-
-/* Used by CM_MIPIEXT_LLI_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_TXPHY_LS_CLK_SHIFT				9
-#define OMAP54XX_OPTFCLKEN_TXPHY_LS_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_TXPHY_LS_CLK_MASK				(1 << 9)
-
-/* Used by CM_L3INIT_USB_TLL_HS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_USB_CH0_CLK_SHIFT				8
-#define OMAP54XX_OPTFCLKEN_USB_CH0_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_USB_CH0_CLK_MASK				(1 << 8)
-
-/* Used by CM_L3INIT_USB_TLL_HS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_USB_CH1_CLK_SHIFT				9
-#define OMAP54XX_OPTFCLKEN_USB_CH1_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_USB_CH1_CLK_MASK				(1 << 9)
-
-/* Used by CM_L3INIT_USB_TLL_HS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_USB_CH2_CLK_SHIFT				10
-#define OMAP54XX_OPTFCLKEN_USB_CH2_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_USB_CH2_CLK_MASK				(1 << 10)
-
-/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_UTMI_P1_CLK_SHIFT				8
-#define OMAP54XX_OPTFCLKEN_UTMI_P1_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_UTMI_P1_CLK_MASK				(1 << 8)
-
-/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_UTMI_P2_CLK_SHIFT				9
-#define OMAP54XX_OPTFCLKEN_UTMI_P2_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_UTMI_P2_CLK_MASK				(1 << 9)
-
-/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL */
 #define OMAP54XX_OPTFCLKEN_UTMI_P3_CLK_SHIFT				10
-#define OMAP54XX_OPTFCLKEN_UTMI_P3_CLK_WIDTH				0x1
-#define OMAP54XX_OPTFCLKEN_UTMI_P3_CLK_MASK				(1 << 10)
-
-/* Used by CM_CORE_AON_DEBUG_OUT, CM_CORE_DEBUG_OUT */
-#define OMAP54XX_OUTPUT_SHIFT						0
-#define OMAP54XX_OUTPUT_WIDTH						0x20
-#define OMAP54XX_OUTPUT_MASK						(0xffffffff << 0)
-
-/* Used by CM_CLKSEL_ABE */
 #define OMAP54XX_PAD_CLKS_GATE_SHIFT					8
-#define OMAP54XX_PAD_CLKS_GATE_WIDTH					0x1
-#define OMAP54XX_PAD_CLKS_GATE_MASK					(1 << 8)
-
-/* Used by CM_RESTORE_ST */
-#define OMAP54XX_PHASE1_COMPLETED_SHIFT					0
-#define OMAP54XX_PHASE1_COMPLETED_WIDTH					0x1
-#define OMAP54XX_PHASE1_COMPLETED_MASK					(1 << 0)
-
-/* Used by CM_RESTORE_ST */
-#define OMAP54XX_PHASE2A_COMPLETED_SHIFT				1
-#define OMAP54XX_PHASE2A_COMPLETED_WIDTH				0x1
-#define OMAP54XX_PHASE2A_COMPLETED_MASK					(1 << 1)
-
-/* Used by CM_RESTORE_ST */
-#define OMAP54XX_PHASE2B_COMPLETED_SHIFT				2
-#define OMAP54XX_PHASE2B_COMPLETED_WIDTH				0x1
-#define OMAP54XX_PHASE2B_COMPLETED_MASK					(1 << 2)
-
-/* Used by CM_DYN_DEP_PRESCAL */
-#define OMAP54XX_PRESCAL_SHIFT						0
-#define OMAP54XX_PRESCAL_WIDTH						0x6
-#define OMAP54XX_PRESCAL_MASK						(0x3f << 0)
-
-/* Used by REVISION_CM_CORE, REVISION_CM_CORE_AON */
-#define OMAP54XX_R_RTL_SHIFT						11
-#define OMAP54XX_R_RTL_WIDTH						0x5
-#define OMAP54XX_R_RTL_MASK						(0x1f << 11)
-
-/* Used by CM_L3INIT_USB_HOST_HS_CLKCTRL, CM_L3INIT_USB_TLL_HS_CLKCTRL */
-#define OMAP54XX_SAR_MODE_SHIFT						4
-#define OMAP54XX_SAR_MODE_WIDTH						0x1
-#define OMAP54XX_SAR_MODE_MASK						(1 << 4)
-
-/* Used by REVISION_CM_CORE, REVISION_CM_CORE_AON */
-#define OMAP54XX_SCHEME_SHIFT						30
-#define OMAP54XX_SCHEME_WIDTH						0x2
-#define OMAP54XX_SCHEME_MASK						(0x3 << 30)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP54XX_SDMA_DYNDEP_SHIFT					11
-#define OMAP54XX_SDMA_DYNDEP_WIDTH					0x1
-#define OMAP54XX_SDMA_DYNDEP_MASK					(1 << 11)
-
-/* Used by CM_IPU_STATICDEP, CM_MPU_STATICDEP */
-#define OMAP54XX_SDMA_STATDEP_SHIFT					11
-#define OMAP54XX_SDMA_STATDEP_WIDTH					0x1
-#define OMAP54XX_SDMA_STATDEP_MASK					(1 << 11)
-
-/* Used by CM_CORE_AON_DEBUG_CFG */
-#define OMAP54XX_SEL0_SHIFT						0
-#define OMAP54XX_SEL0_WIDTH						0x7
-#define OMAP54XX_SEL0_MASK						(0x7f << 0)
-
-/* Renamed from SEL0 Used by CM_CORE_DEBUG_CFG */
-#define OMAP54XX_SEL0_0_7_SHIFT						0
-#define OMAP54XX_SEL0_0_7_WIDTH						0x8
-#define OMAP54XX_SEL0_0_7_MASK						(0xff << 0)
-
-/* Used by CM_CORE_AON_DEBUG_CFG */
-#define OMAP54XX_SEL1_SHIFT						8
-#define OMAP54XX_SEL1_WIDTH						0x7
-#define OMAP54XX_SEL1_MASK						(0x7f << 8)
-
-/* Renamed from SEL1 Used by CM_CORE_DEBUG_CFG */
-#define OMAP54XX_SEL1_CORE_DEBUG_CFG_SHIFT				8
-#define OMAP54XX_SEL1_CORE_DEBUG_CFG_WIDTH				0x8
-#define OMAP54XX_SEL1_CORE_DEBUG_CFG_MASK				(0xff << 8)
-
-/* Used by CM_CORE_AON_DEBUG_CFG */
-#define OMAP54XX_SEL2_SHIFT						16
-#define OMAP54XX_SEL2_WIDTH						0x7
-#define OMAP54XX_SEL2_MASK						(0x7f << 16)
-
-/* Renamed from SEL2 Used by CM_CORE_DEBUG_CFG */
-#define OMAP54XX_SEL2_CORE_DEBUG_CFG_SHIFT				16
-#define OMAP54XX_SEL2_CORE_DEBUG_CFG_WIDTH				0x8
-#define OMAP54XX_SEL2_CORE_DEBUG_CFG_MASK				(0xff << 16)
-
-/* Used by CM_CORE_AON_DEBUG_CFG */
-#define OMAP54XX_SEL3_SHIFT						24
-#define OMAP54XX_SEL3_WIDTH						0x7
-#define OMAP54XX_SEL3_MASK						(0x7f << 24)
-
-/* Renamed from SEL3 Used by CM_CORE_DEBUG_CFG */
-#define OMAP54XX_SEL3_CORE_DEBUG_CFG_SHIFT				24
-#define OMAP54XX_SEL3_CORE_DEBUG_CFG_WIDTH				0x8
-#define OMAP54XX_SEL3_CORE_DEBUG_CFG_MASK				(0xff << 24)
-
-/* Used by CM_CLKSEL_ABE */
 #define OMAP54XX_SLIMBUS1_CLK_GATE_SHIFT				10
-#define OMAP54XX_SLIMBUS1_CLK_GATE_WIDTH				0x1
-#define OMAP54XX_SLIMBUS1_CLK_GATE_MASK					(1 << 10)
-
-/*
- * Used by CM_ABE_AESS_CLKCTRL, CM_C2C_C2C_CLKCTRL, CM_CAM_FDIF_CLKCTRL,
- * CM_CAM_ISS_CLKCTRL, CM_DMA_DMA_SYSTEM_CLKCTRL, CM_DSP_DSP_CLKCTRL,
- * CM_DSS_BB2D_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL,
- * CM_GPU_GPU_CLKCTRL, CM_IPU_IPU_CLKCTRL, CM_IVA_IVA_CLKCTRL,
- * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_IEEE1500_2_OCP_CLKCTRL,
- * CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_SATA_CLKCTRL,
- * CM_L3INIT_UNIPRO2_CLKCTRL, CM_L3INIT_USB_HOST_HS_CLKCTRL,
- * CM_L3INIT_USB_OTG_SS_CLKCTRL, CM_L4SEC_DMA_CRYPTO_CLKCTRL,
- * CM_MIPIEXT_LLI_CLKCTRL, CM_MPU_MPU_CLKCTRL
- */
-#define OMAP54XX_STBYST_SHIFT						18
-#define OMAP54XX_STBYST_WIDTH						0x1
-#define OMAP54XX_STBYST_MASK						(1 << 18)
-
-/*
- * Used by CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_IVA,
- * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER, CM_IDLEST_DPLL_UNIPRO1,
- * CM_IDLEST_DPLL_UNIPRO2, CM_IDLEST_DPLL_USB
- */
-#define OMAP54XX_ST_DPLL_CLK_SHIFT					0
-#define OMAP54XX_ST_DPLL_CLK_WIDTH					0x1
 #define OMAP54XX_ST_DPLL_CLK_MASK					(1 << 0)
-
-/*
- * Used by CM_CLKDCOLDO_DPLL_UNIPRO1, CM_CLKDCOLDO_DPLL_UNIPRO2,
- * CM_CLKDCOLDO_DPLL_USB
- */
-#define OMAP54XX_ST_DPLL_CLKDCOLDO_SHIFT				9
-#define OMAP54XX_ST_DPLL_CLKDCOLDO_WIDTH				0x1
-#define OMAP54XX_ST_DPLL_CLKDCOLDO_MASK					(1 << 9)
-
-/*
- * Used by CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_IVA,
- * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER, CM_IDLEST_DPLL_UNIPRO1,
- * CM_IDLEST_DPLL_UNIPRO2, CM_IDLEST_DPLL_USB
- */
-#define OMAP54XX_ST_DPLL_INIT_SHIFT					4
-#define OMAP54XX_ST_DPLL_INIT_WIDTH					0x1
-#define OMAP54XX_ST_DPLL_INIT_MASK					(1 << 4)
-
-/*
- * Used by CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_IVA,
- * CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER, CM_IDLEST_DPLL_UNIPRO1,
- * CM_IDLEST_DPLL_UNIPRO2, CM_IDLEST_DPLL_USB
- */
-#define OMAP54XX_ST_DPLL_MODE_SHIFT					1
-#define OMAP54XX_ST_DPLL_MODE_WIDTH					0x3
-#define OMAP54XX_ST_DPLL_MODE_MASK					(0x7 << 1)
-
-/* Used by CM_CLKSEL_SYS */
 #define OMAP54XX_SYS_CLKSEL_SHIFT					0
 #define OMAP54XX_SYS_CLKSEL_WIDTH					0x3
-#define OMAP54XX_SYS_CLKSEL_MASK					(0x7 << 0)
-
-/*
- * Used by CM_C2C_DYNAMICDEP, CM_DSP_DYNAMICDEP, CM_EMU_DYNAMICDEP,
- * CM_IPU_DYNAMICDEP, CM_L3MAIN1_DYNAMICDEP, CM_L3MAIN2_DYNAMICDEP,
- * CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP, CM_MIPIEXT_DYNAMICDEP,
- * CM_MPU_DYNAMICDEP
- */
-#define OMAP54XX_WINDOWSIZE_SHIFT					24
-#define OMAP54XX_WINDOWSIZE_WIDTH					0x4
-#define OMAP54XX_WINDOWSIZE_MASK					(0xf << 24)
-
-/* Used by CM_L3MAIN1_DYNAMICDEP */
-#define OMAP54XX_WKUPAON_DYNDEP_SHIFT					15
-#define OMAP54XX_WKUPAON_DYNDEP_WIDTH					0x1
-#define OMAP54XX_WKUPAON_DYNDEP_MASK					(1 << 15)
-
-/*
- * Used by CM_DMA_STATICDEP, CM_DSP_STATICDEP, CM_IPU_STATICDEP,
- * CM_L3INIT_STATICDEP, CM_MPU_STATICDEP
- */
 #define OMAP54XX_WKUPAON_STATDEP_SHIFT					15
-#define OMAP54XX_WKUPAON_STATDEP_WIDTH					0x1
-#define OMAP54XX_WKUPAON_STATDEP_MASK					(1 << 15)
-
-/* Used by REVISION_CM_CORE, REVISION_CM_CORE_AON */
-#define OMAP54XX_X_MAJOR_SHIFT						8
-#define OMAP54XX_X_MAJOR_WIDTH						0x3
-#define OMAP54XX_X_MAJOR_MASK						(0x7 << 8)
-
-/* Used by REVISION_CM_CORE, REVISION_CM_CORE_AON */
-#define OMAP54XX_Y_MINOR_SHIFT						0
-#define OMAP54XX_Y_MINOR_WIDTH						0x6
-#define OMAP54XX_Y_MINOR_MASK						(0x3f << 0)
 #endif
diff --git a/arch/arm/mach-omap2/cm-regbits-7xx.h b/arch/arm/mach-omap2/cm-regbits-7xx.h
new file mode 100644
index 0000000..ad8f81c
--- /dev/null
+++ b/arch/arm/mach-omap2/cm-regbits-7xx.h
@@ -0,0 +1,51 @@
+/*
+ * DRA7xx Clock Management register bits
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Generated by code originally written by:
+ * Paul Walmsley (paul@pwsan.com)
+ * Rajendra Nayak (rnayak@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_7XX_H
+#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_7XX_H
+
+#define DRA7XX_ATL_STATDEP_SHIFT				30
+#define DRA7XX_CAM_STATDEP_SHIFT				9
+#define DRA7XX_DSP1_STATDEP_SHIFT				1
+#define DRA7XX_DSP2_STATDEP_SHIFT				18
+#define DRA7XX_DSS_STATDEP_SHIFT				8
+#define DRA7XX_EMIF_STATDEP_SHIFT				4
+#define DRA7XX_EVE1_STATDEP_SHIFT				19
+#define DRA7XX_EVE2_STATDEP_SHIFT				20
+#define DRA7XX_EVE3_STATDEP_SHIFT				21
+#define DRA7XX_EVE4_STATDEP_SHIFT				22
+#define DRA7XX_GMAC_STATDEP_SHIFT				25
+#define DRA7XX_GPU_STATDEP_SHIFT				10
+#define DRA7XX_IPU1_STATDEP_SHIFT				23
+#define DRA7XX_IPU2_STATDEP_SHIFT				0
+#define DRA7XX_IPU_STATDEP_SHIFT				24
+#define DRA7XX_IVA_STATDEP_SHIFT				2
+#define DRA7XX_L3INIT_STATDEP_SHIFT				7
+#define DRA7XX_L3MAIN1_STATDEP_SHIFT				5
+#define DRA7XX_L4CFG_STATDEP_SHIFT				12
+#define DRA7XX_L4PER2_STATDEP_SHIFT				26
+#define DRA7XX_L4PER3_STATDEP_SHIFT				27
+#define DRA7XX_L4PER_STATDEP_SHIFT				13
+#define DRA7XX_L4SEC_STATDEP_SHIFT				14
+#define DRA7XX_PCIE_STATDEP_SHIFT				29
+#define DRA7XX_VPE_STATDEP_SHIFT				28
+#define DRA7XX_WKUPAON_STATDEP_SHIFT				15
+#endif
diff --git a/arch/arm/mach-omap2/cm1_7xx.h b/arch/arm/mach-omap2/cm1_7xx.h
new file mode 100644
index 0000000..ca6fa1f
--- /dev/null
+++ b/arch/arm/mach-omap2/cm1_7xx.h
@@ -0,0 +1,324 @@
+/*
+ * DRA7xx CM1 instance offset macros
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Generated by code originally written by:
+ * Paul Walmsley (paul@pwsan.com)
+ * Rajendra Nayak (rnayak@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CM1_7XX_H
+#define __ARCH_ARM_MACH_OMAP2_CM1_7XX_H
+
+#include "cm_44xx_54xx.h"
+
+/* CM1 base address */
+#define DRA7XX_CM_CORE_AON_BASE		0x4a005000
+
+#define DRA7XX_CM_CORE_AON_REGADDR(inst, reg)				\
+	OMAP2_L4_IO_ADDRESS(DRA7XX_CM_CORE_AON_BASE + (inst) + (reg))
+
+/* CM_CORE_AON instances */
+#define DRA7XX_CM_CORE_AON_OCP_SOCKET_INST	0x0000
+#define DRA7XX_CM_CORE_AON_CKGEN_INST		0x0100
+#define DRA7XX_CM_CORE_AON_MPU_INST		0x0300
+#define DRA7XX_CM_CORE_AON_DSP1_INST		0x0400
+#define DRA7XX_CM_CORE_AON_IPU_INST		0x0500
+#define DRA7XX_CM_CORE_AON_DSP2_INST		0x0600
+#define DRA7XX_CM_CORE_AON_EVE1_INST		0x0640
+#define DRA7XX_CM_CORE_AON_EVE2_INST		0x0680
+#define DRA7XX_CM_CORE_AON_EVE3_INST		0x06c0
+#define DRA7XX_CM_CORE_AON_EVE4_INST		0x0700
+#define DRA7XX_CM_CORE_AON_RTC_INST		0x0740
+#define DRA7XX_CM_CORE_AON_VPE_INST		0x0760
+#define DRA7XX_CM_CORE_AON_RESTORE_INST		0x0e00
+#define DRA7XX_CM_CORE_AON_INSTR_INST		0x0f00
+
+/* CM_CORE_AON clockdomain register offsets (from instance start) */
+#define DRA7XX_CM_CORE_AON_MPU_MPU_CDOFFS	0x0000
+#define DRA7XX_CM_CORE_AON_DSP1_DSP1_CDOFFS	0x0000
+#define DRA7XX_CM_CORE_AON_IPU_IPU1_CDOFFS	0x0000
+#define DRA7XX_CM_CORE_AON_IPU_IPU_CDOFFS	0x0040
+#define DRA7XX_CM_CORE_AON_DSP2_DSP2_CDOFFS	0x0000
+#define DRA7XX_CM_CORE_AON_EVE1_EVE1_CDOFFS	0x0000
+#define DRA7XX_CM_CORE_AON_EVE2_EVE2_CDOFFS	0x0000
+#define DRA7XX_CM_CORE_AON_EVE3_EVE3_CDOFFS	0x0000
+#define DRA7XX_CM_CORE_AON_EVE4_EVE4_CDOFFS	0x0000
+#define DRA7XX_CM_CORE_AON_RTC_RTC_CDOFFS	0x0000
+#define DRA7XX_CM_CORE_AON_VPE_VPE_CDOFFS	0x0000
+
+/* CM_CORE_AON */
+
+/* CM_CORE_AON.OCP_SOCKET_CM_CORE_AON register offsets */
+#define DRA7XX_REVISION_CM_CORE_AON_OFFSET		0x0000
+#define DRA7XX_CM_CM_CORE_AON_PROFILING_CLKCTRL_OFFSET	0x0040
+#define DRA7XX_CM_CM_CORE_AON_PROFILING_CLKCTRL		DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_OCP_SOCKET_INST, 0x0040)
+#define DRA7XX_CM_CORE_AON_DEBUG_OUT_OFFSET		0x00ec
+#define DRA7XX_CM_CORE_AON_DEBUG_CFG0_OFFSET		0x00f0
+#define DRA7XX_CM_CORE_AON_DEBUG_CFG1_OFFSET		0x00f4
+#define DRA7XX_CM_CORE_AON_DEBUG_CFG2_OFFSET		0x00f8
+#define DRA7XX_CM_CORE_AON_DEBUG_CFG3_OFFSET		0x00fc
+
+/* CM_CORE_AON.CKGEN_CM_CORE_AON register offsets */
+#define DRA7XX_CM_CLKSEL_CORE_OFFSET			0x0000
+#define DRA7XX_CM_CLKSEL_CORE				DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0000)
+#define DRA7XX_CM_CLKSEL_ABE_OFFSET			0x0008
+#define DRA7XX_CM_CLKSEL_ABE				DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0008)
+#define DRA7XX_CM_DLL_CTRL_OFFSET			0x0010
+#define DRA7XX_CM_CLKMODE_DPLL_CORE_OFFSET		0x0020
+#define DRA7XX_CM_CLKMODE_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0020)
+#define DRA7XX_CM_IDLEST_DPLL_CORE_OFFSET		0x0024
+#define DRA7XX_CM_IDLEST_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0024)
+#define DRA7XX_CM_AUTOIDLE_DPLL_CORE_OFFSET		0x0028
+#define DRA7XX_CM_AUTOIDLE_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0028)
+#define DRA7XX_CM_CLKSEL_DPLL_CORE_OFFSET		0x002c
+#define DRA7XX_CM_CLKSEL_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x002c)
+#define DRA7XX_CM_DIV_M2_DPLL_CORE_OFFSET		0x0030
+#define DRA7XX_CM_DIV_M2_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0030)
+#define DRA7XX_CM_DIV_M3_DPLL_CORE_OFFSET		0x0034
+#define DRA7XX_CM_DIV_M3_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0034)
+#define DRA7XX_CM_DIV_H11_DPLL_CORE_OFFSET		0x0038
+#define DRA7XX_CM_DIV_H11_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0038)
+#define DRA7XX_CM_DIV_H12_DPLL_CORE_OFFSET		0x003c
+#define DRA7XX_CM_DIV_H12_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x003c)
+#define DRA7XX_CM_DIV_H13_DPLL_CORE_OFFSET		0x0040
+#define DRA7XX_CM_DIV_H13_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0040)
+#define DRA7XX_CM_DIV_H14_DPLL_CORE_OFFSET		0x0044
+#define DRA7XX_CM_DIV_H14_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0044)
+#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_CORE_OFFSET	0x0048
+#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_CORE_OFFSET	0x004c
+#define DRA7XX_CM_DIV_H21_DPLL_CORE_OFFSET		0x0050
+#define DRA7XX_CM_DIV_H21_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0050)
+#define DRA7XX_CM_DIV_H22_DPLL_CORE_OFFSET		0x0054
+#define DRA7XX_CM_DIV_H22_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0054)
+#define DRA7XX_CM_DIV_H23_DPLL_CORE_OFFSET		0x0058
+#define DRA7XX_CM_DIV_H23_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0058)
+#define DRA7XX_CM_DIV_H24_DPLL_CORE_OFFSET		0x005c
+#define DRA7XX_CM_DIV_H24_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x005c)
+#define DRA7XX_CM_CLKMODE_DPLL_MPU_OFFSET		0x0060
+#define DRA7XX_CM_CLKMODE_DPLL_MPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0060)
+#define DRA7XX_CM_IDLEST_DPLL_MPU_OFFSET		0x0064
+#define DRA7XX_CM_IDLEST_DPLL_MPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0064)
+#define DRA7XX_CM_AUTOIDLE_DPLL_MPU_OFFSET		0x0068
+#define DRA7XX_CM_AUTOIDLE_DPLL_MPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0068)
+#define DRA7XX_CM_CLKSEL_DPLL_MPU_OFFSET		0x006c
+#define DRA7XX_CM_CLKSEL_DPLL_MPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x006c)
+#define DRA7XX_CM_DIV_M2_DPLL_MPU_OFFSET		0x0070
+#define DRA7XX_CM_DIV_M2_DPLL_MPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0070)
+#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_MPU_OFFSET	0x0088
+#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_MPU_OFFSET	0x008c
+#define DRA7XX_CM_BYPCLK_DPLL_MPU_OFFSET		0x009c
+#define DRA7XX_CM_BYPCLK_DPLL_MPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x009c)
+#define DRA7XX_CM_CLKMODE_DPLL_IVA_OFFSET		0x00a0
+#define DRA7XX_CM_CLKMODE_DPLL_IVA			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00a0)
+#define DRA7XX_CM_IDLEST_DPLL_IVA_OFFSET		0x00a4
+#define DRA7XX_CM_IDLEST_DPLL_IVA			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00a4)
+#define DRA7XX_CM_AUTOIDLE_DPLL_IVA_OFFSET		0x00a8
+#define DRA7XX_CM_AUTOIDLE_DPLL_IVA			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00a8)
+#define DRA7XX_CM_CLKSEL_DPLL_IVA_OFFSET		0x00ac
+#define DRA7XX_CM_CLKSEL_DPLL_IVA			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00ac)
+#define DRA7XX_CM_DIV_M2_DPLL_IVA_OFFSET		0x00b0
+#define DRA7XX_CM_DIV_M2_DPLL_IVA			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00b0)
+#define DRA7XX_CM_DIV_M3_DPLL_IVA_OFFSET		0x00b4
+#define DRA7XX_CM_DIV_M3_DPLL_IVA			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00b4)
+#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_IVA_OFFSET	0x00c8
+#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_IVA_OFFSET	0x00cc
+#define DRA7XX_CM_BYPCLK_DPLL_IVA_OFFSET		0x00dc
+#define DRA7XX_CM_BYPCLK_DPLL_IVA			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00dc)
+#define DRA7XX_CM_CLKMODE_DPLL_ABE_OFFSET		0x00e0
+#define DRA7XX_CM_CLKMODE_DPLL_ABE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00e0)
+#define DRA7XX_CM_IDLEST_DPLL_ABE_OFFSET		0x00e4
+#define DRA7XX_CM_IDLEST_DPLL_ABE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00e4)
+#define DRA7XX_CM_AUTOIDLE_DPLL_ABE_OFFSET		0x00e8
+#define DRA7XX_CM_AUTOIDLE_DPLL_ABE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00e8)
+#define DRA7XX_CM_CLKSEL_DPLL_ABE_OFFSET		0x00ec
+#define DRA7XX_CM_CLKSEL_DPLL_ABE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00ec)
+#define DRA7XX_CM_DIV_M2_DPLL_ABE_OFFSET		0x00f0
+#define DRA7XX_CM_DIV_M2_DPLL_ABE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00f0)
+#define DRA7XX_CM_DIV_M3_DPLL_ABE_OFFSET		0x00f4
+#define DRA7XX_CM_DIV_M3_DPLL_ABE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00f4)
+#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_ABE_OFFSET	0x0108
+#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_ABE_OFFSET	0x010c
+#define DRA7XX_CM_CLKMODE_DPLL_DDR_OFFSET		0x0110
+#define DRA7XX_CM_CLKMODE_DPLL_DDR			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0110)
+#define DRA7XX_CM_IDLEST_DPLL_DDR_OFFSET		0x0114
+#define DRA7XX_CM_IDLEST_DPLL_DDR			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0114)
+#define DRA7XX_CM_AUTOIDLE_DPLL_DDR_OFFSET		0x0118
+#define DRA7XX_CM_AUTOIDLE_DPLL_DDR			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0118)
+#define DRA7XX_CM_CLKSEL_DPLL_DDR_OFFSET		0x011c
+#define DRA7XX_CM_CLKSEL_DPLL_DDR			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x011c)
+#define DRA7XX_CM_DIV_M2_DPLL_DDR_OFFSET		0x0120
+#define DRA7XX_CM_DIV_M2_DPLL_DDR			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0120)
+#define DRA7XX_CM_DIV_M3_DPLL_DDR_OFFSET		0x0124
+#define DRA7XX_CM_DIV_M3_DPLL_DDR			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0124)
+#define DRA7XX_CM_DIV_H11_DPLL_DDR_OFFSET		0x0128
+#define DRA7XX_CM_DIV_H11_DPLL_DDR			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0128)
+#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_DDR_OFFSET	0x012c
+#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_DDR_OFFSET	0x0130
+#define DRA7XX_CM_CLKMODE_DPLL_DSP_OFFSET		0x0134
+#define DRA7XX_CM_CLKMODE_DPLL_DSP			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0134)
+#define DRA7XX_CM_IDLEST_DPLL_DSP_OFFSET		0x0138
+#define DRA7XX_CM_IDLEST_DPLL_DSP			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0138)
+#define DRA7XX_CM_AUTOIDLE_DPLL_DSP_OFFSET		0x013c
+#define DRA7XX_CM_AUTOIDLE_DPLL_DSP			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x013c)
+#define DRA7XX_CM_CLKSEL_DPLL_DSP_OFFSET		0x0140
+#define DRA7XX_CM_CLKSEL_DPLL_DSP			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0140)
+#define DRA7XX_CM_DIV_M2_DPLL_DSP_OFFSET		0x0144
+#define DRA7XX_CM_DIV_M2_DPLL_DSP			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0144)
+#define DRA7XX_CM_DIV_M3_DPLL_DSP_OFFSET		0x0148
+#define DRA7XX_CM_DIV_M3_DPLL_DSP			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0148)
+#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_DSP_OFFSET	0x014c
+#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_DSP_OFFSET	0x0150
+#define DRA7XX_CM_BYPCLK_DPLL_DSP_OFFSET		0x0154
+#define DRA7XX_CM_BYPCLK_DPLL_DSP			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0154)
+#define DRA7XX_CM_SHADOW_FREQ_CONFIG1_OFFSET		0x0160
+#define DRA7XX_CM_SHADOW_FREQ_CONFIG2_OFFSET		0x0164
+#define DRA7XX_CM_DYN_DEP_PRESCAL_OFFSET		0x0170
+#define DRA7XX_CM_RESTORE_ST_OFFSET			0x0180
+#define DRA7XX_CM_CLKMODE_DPLL_EVE_OFFSET		0x0184
+#define DRA7XX_CM_CLKMODE_DPLL_EVE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0184)
+#define DRA7XX_CM_IDLEST_DPLL_EVE_OFFSET		0x0188
+#define DRA7XX_CM_IDLEST_DPLL_EVE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0188)
+#define DRA7XX_CM_AUTOIDLE_DPLL_EVE_OFFSET		0x018c
+#define DRA7XX_CM_AUTOIDLE_DPLL_EVE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x018c)
+#define DRA7XX_CM_CLKSEL_DPLL_EVE_OFFSET		0x0190
+#define DRA7XX_CM_CLKSEL_DPLL_EVE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0190)
+#define DRA7XX_CM_DIV_M2_DPLL_EVE_OFFSET		0x0194
+#define DRA7XX_CM_DIV_M2_DPLL_EVE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0194)
+#define DRA7XX_CM_DIV_M3_DPLL_EVE_OFFSET		0x0198
+#define DRA7XX_CM_DIV_M3_DPLL_EVE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0198)
+#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_EVE_OFFSET	0x019c
+#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_EVE_OFFSET	0x01a0
+#define DRA7XX_CM_BYPCLK_DPLL_EVE_OFFSET		0x01a4
+#define DRA7XX_CM_BYPCLK_DPLL_EVE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01a4)
+#define DRA7XX_CM_CLKMODE_DPLL_GMAC_OFFSET		0x01a8
+#define DRA7XX_CM_CLKMODE_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01a8)
+#define DRA7XX_CM_IDLEST_DPLL_GMAC_OFFSET		0x01ac
+#define DRA7XX_CM_IDLEST_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01ac)
+#define DRA7XX_CM_AUTOIDLE_DPLL_GMAC_OFFSET		0x01b0
+#define DRA7XX_CM_AUTOIDLE_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01b0)
+#define DRA7XX_CM_CLKSEL_DPLL_GMAC_OFFSET		0x01b4
+#define DRA7XX_CM_CLKSEL_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01b4)
+#define DRA7XX_CM_DIV_M2_DPLL_GMAC_OFFSET		0x01b8
+#define DRA7XX_CM_DIV_M2_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01b8)
+#define DRA7XX_CM_DIV_M3_DPLL_GMAC_OFFSET		0x01bc
+#define DRA7XX_CM_DIV_M3_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01bc)
+#define DRA7XX_CM_DIV_H11_DPLL_GMAC_OFFSET		0x01c0
+#define DRA7XX_CM_DIV_H11_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01c0)
+#define DRA7XX_CM_DIV_H12_DPLL_GMAC_OFFSET		0x01c4
+#define DRA7XX_CM_DIV_H12_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01c4)
+#define DRA7XX_CM_DIV_H13_DPLL_GMAC_OFFSET		0x01c8
+#define DRA7XX_CM_DIV_H13_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01c8)
+#define DRA7XX_CM_DIV_H14_DPLL_GMAC_OFFSET		0x01cc
+#define DRA7XX_CM_DIV_H14_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01cc)
+#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_GMAC_OFFSET	0x01d0
+#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_GMAC_OFFSET	0x01d4
+#define DRA7XX_CM_CLKMODE_DPLL_GPU_OFFSET		0x01d8
+#define DRA7XX_CM_CLKMODE_DPLL_GPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01d8)
+#define DRA7XX_CM_IDLEST_DPLL_GPU_OFFSET		0x01dc
+#define DRA7XX_CM_IDLEST_DPLL_GPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01dc)
+#define DRA7XX_CM_AUTOIDLE_DPLL_GPU_OFFSET		0x01e0
+#define DRA7XX_CM_AUTOIDLE_DPLL_GPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01e0)
+#define DRA7XX_CM_CLKSEL_DPLL_GPU_OFFSET		0x01e4
+#define DRA7XX_CM_CLKSEL_DPLL_GPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01e4)
+#define DRA7XX_CM_DIV_M2_DPLL_GPU_OFFSET		0x01e8
+#define DRA7XX_CM_DIV_M2_DPLL_GPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01e8)
+#define DRA7XX_CM_DIV_M3_DPLL_GPU_OFFSET		0x01ec
+#define DRA7XX_CM_DIV_M3_DPLL_GPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01ec)
+#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_GPU_OFFSET	0x01f0
+#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_GPU_OFFSET	0x01f4
+
+/* CM_CORE_AON.MPU_CM_CORE_AON register offsets */
+#define DRA7XX_CM_MPU_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_MPU_STATICDEP_OFFSET			0x0004
+#define DRA7XX_CM_MPU_DYNAMICDEP_OFFSET			0x0008
+#define DRA7XX_CM_MPU_MPU_CLKCTRL_OFFSET		0x0020
+#define DRA7XX_CM_MPU_MPU_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_MPU_INST, 0x0020)
+#define DRA7XX_CM_MPU_MPU_MPU_DBG_CLKCTRL_OFFSET	0x0028
+#define DRA7XX_CM_MPU_MPU_MPU_DBG_CLKCTRL		DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_MPU_INST, 0x0028)
+
+/* CM_CORE_AON.DSP1_CM_CORE_AON register offsets */
+#define DRA7XX_CM_DSP1_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_DSP1_STATICDEP_OFFSET			0x0004
+#define DRA7XX_CM_DSP1_DYNAMICDEP_OFFSET		0x0008
+#define DRA7XX_CM_DSP1_DSP1_CLKCTRL_OFFSET		0x0020
+#define DRA7XX_CM_DSP1_DSP1_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_DSP1_INST, 0x0020)
+
+/* CM_CORE_AON.IPU_CM_CORE_AON register offsets */
+#define DRA7XX_CM_IPU1_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_IPU1_STATICDEP_OFFSET			0x0004
+#define DRA7XX_CM_IPU1_DYNAMICDEP_OFFSET		0x0008
+#define DRA7XX_CM_IPU1_IPU1_CLKCTRL_OFFSET		0x0020
+#define DRA7XX_CM_IPU1_IPU1_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_IPU_INST, 0x0020)
+#define DRA7XX_CM_IPU_CLKSTCTRL_OFFSET			0x0040
+#define DRA7XX_CM_IPU_MCASP1_CLKCTRL_OFFSET		0x0050
+#define DRA7XX_CM_IPU_MCASP1_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_IPU_INST, 0x0050)
+#define DRA7XX_CM_IPU_TIMER5_CLKCTRL_OFFSET		0x0058
+#define DRA7XX_CM_IPU_TIMER5_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_IPU_INST, 0x0058)
+#define DRA7XX_CM_IPU_TIMER6_CLKCTRL_OFFSET		0x0060
+#define DRA7XX_CM_IPU_TIMER6_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_IPU_INST, 0x0060)
+#define DRA7XX_CM_IPU_TIMER7_CLKCTRL_OFFSET		0x0068
+#define DRA7XX_CM_IPU_TIMER7_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_IPU_INST, 0x0068)
+#define DRA7XX_CM_IPU_TIMER8_CLKCTRL_OFFSET		0x0070
+#define DRA7XX_CM_IPU_TIMER8_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_IPU_INST, 0x0070)
+#define DRA7XX_CM_IPU_I2C5_CLKCTRL_OFFSET		0x0078
+#define DRA7XX_CM_IPU_I2C5_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_IPU_INST, 0x0078)
+#define DRA7XX_CM_IPU_UART6_CLKCTRL_OFFSET		0x0080
+#define DRA7XX_CM_IPU_UART6_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_IPU_INST, 0x0080)
+
+/* CM_CORE_AON.DSP2_CM_CORE_AON register offsets */
+#define DRA7XX_CM_DSP2_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_DSP2_STATICDEP_OFFSET			0x0004
+#define DRA7XX_CM_DSP2_DYNAMICDEP_OFFSET		0x0008
+#define DRA7XX_CM_DSP2_DSP2_CLKCTRL_OFFSET		0x0020
+#define DRA7XX_CM_DSP2_DSP2_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_DSP2_INST, 0x0020)
+
+/* CM_CORE_AON.EVE1_CM_CORE_AON register offsets */
+#define DRA7XX_CM_EVE1_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_EVE1_STATICDEP_OFFSET			0x0004
+#define DRA7XX_CM_EVE1_EVE1_CLKCTRL_OFFSET		0x0020
+#define DRA7XX_CM_EVE1_EVE1_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_EVE1_INST, 0x0020)
+
+/* CM_CORE_AON.EVE2_CM_CORE_AON register offsets */
+#define DRA7XX_CM_EVE2_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_EVE2_STATICDEP_OFFSET			0x0004
+#define DRA7XX_CM_EVE2_EVE2_CLKCTRL_OFFSET		0x0020
+#define DRA7XX_CM_EVE2_EVE2_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_EVE2_INST, 0x0020)
+
+/* CM_CORE_AON.EVE3_CM_CORE_AON register offsets */
+#define DRA7XX_CM_EVE3_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_EVE3_STATICDEP_OFFSET			0x0004
+#define DRA7XX_CM_EVE3_EVE3_CLKCTRL_OFFSET		0x0020
+#define DRA7XX_CM_EVE3_EVE3_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_EVE3_INST, 0x0020)
+
+/* CM_CORE_AON.EVE4_CM_CORE_AON register offsets */
+#define DRA7XX_CM_EVE4_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_EVE4_STATICDEP_OFFSET			0x0004
+#define DRA7XX_CM_EVE4_EVE4_CLKCTRL_OFFSET		0x0020
+#define DRA7XX_CM_EVE4_EVE4_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_EVE4_INST, 0x0020)
+
+/* CM_CORE_AON.RTC_CM_CORE_AON register offsets */
+#define DRA7XX_CM_RTC_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_RTC_RTCSS_CLKCTRL_OFFSET		0x0004
+#define DRA7XX_CM_RTC_RTCSS_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_RTC_INST, 0x0004)
+
+/* CM_CORE_AON.VPE_CM_CORE_AON register offsets */
+#define DRA7XX_CM_VPE_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_VPE_VPE_CLKCTRL_OFFSET		0x0004
+#define DRA7XX_CM_VPE_VPE_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_VPE_INST, 0x0004)
+#define DRA7XX_CM_VPE_STATICDEP_OFFSET			0x0008
+
+#endif
diff --git a/arch/arm/mach-omap2/cm2_7xx.h b/arch/arm/mach-omap2/cm2_7xx.h
new file mode 100644
index 0000000..9ad7594
--- /dev/null
+++ b/arch/arm/mach-omap2/cm2_7xx.h
@@ -0,0 +1,513 @@
+/*
+ * DRA7xx CM2 instance offset macros
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Generated by code originally written by:
+ * Paul Walmsley (paul@pwsan.com)
+ * Rajendra Nayak (rnayak@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CM2_7XX_H
+#define __ARCH_ARM_MACH_OMAP2_CM2_7XX_H
+
+#include "cm_44xx_54xx.h"
+
+/* CM2 base address */
+#define DRA7XX_CM_CORE_BASE		0x4a008000
+
+#define DRA7XX_CM_CORE_REGADDR(inst, reg)				\
+	OMAP2_L4_IO_ADDRESS(DRA7XX_CM_CORE_BASE + (inst) + (reg))
+
+/* CM_CORE instances */
+#define DRA7XX_CM_CORE_OCP_SOCKET_INST	0x0000
+#define DRA7XX_CM_CORE_CKGEN_INST	0x0104
+#define DRA7XX_CM_CORE_COREAON_INST	0x0600
+#define DRA7XX_CM_CORE_CORE_INST	0x0700
+#define DRA7XX_CM_CORE_IVA_INST		0x0f00
+#define DRA7XX_CM_CORE_CAM_INST		0x1000
+#define DRA7XX_CM_CORE_DSS_INST		0x1100
+#define DRA7XX_CM_CORE_GPU_INST		0x1200
+#define DRA7XX_CM_CORE_L3INIT_INST	0x1300
+#define DRA7XX_CM_CORE_CUSTEFUSE_INST	0x1600
+#define DRA7XX_CM_CORE_L4PER_INST	0x1700
+#define DRA7XX_CM_CORE_RESTORE_INST	0x1e18
+
+/* CM_CORE clockdomain register offsets (from instance start) */
+#define DRA7XX_CM_CORE_COREAON_COREAON_CDOFFS		0x0000
+#define DRA7XX_CM_CORE_CORE_L3MAIN1_CDOFFS		0x0000
+#define DRA7XX_CM_CORE_CORE_IPU2_CDOFFS			0x0200
+#define DRA7XX_CM_CORE_CORE_DMA_CDOFFS			0x0300
+#define DRA7XX_CM_CORE_CORE_EMIF_CDOFFS			0x0400
+#define DRA7XX_CM_CORE_CORE_ATL_CDOFFS			0x0520
+#define DRA7XX_CM_CORE_CORE_L4CFG_CDOFFS		0x0600
+#define DRA7XX_CM_CORE_CORE_L3INSTR_CDOFFS		0x0700
+#define DRA7XX_CM_CORE_IVA_IVA_CDOFFS			0x0000
+#define DRA7XX_CM_CORE_CAM_CAM_CDOFFS			0x0000
+#define DRA7XX_CM_CORE_DSS_DSS_CDOFFS			0x0000
+#define DRA7XX_CM_CORE_GPU_GPU_CDOFFS			0x0000
+#define DRA7XX_CM_CORE_L3INIT_L3INIT_CDOFFS		0x0000
+#define DRA7XX_CM_CORE_L3INIT_PCIE_CDOFFS		0x00a0
+#define DRA7XX_CM_CORE_L3INIT_GMAC_CDOFFS		0x00c0
+#define DRA7XX_CM_CORE_CUSTEFUSE_CUSTEFUSE_CDOFFS	0x0000
+#define DRA7XX_CM_CORE_L4PER_L4PER_CDOFFS		0x0000
+#define DRA7XX_CM_CORE_L4PER_L4SEC_CDOFFS		0x0180
+#define DRA7XX_CM_CORE_L4PER_L4PER2_CDOFFS		0x01fc
+#define DRA7XX_CM_CORE_L4PER_L4PER3_CDOFFS		0x0210
+
+/* CM_CORE */
+
+/* CM_CORE.OCP_SOCKET_CM_CORE register offsets */
+#define DRA7XX_REVISION_CM_CORE_OFFSET				0x0000
+#define DRA7XX_CM_CM_CORE_PROFILING_CLKCTRL_OFFSET		0x0040
+#define DRA7XX_CM_CM_CORE_PROFILING_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_OCP_SOCKET_INST, 0x0040)
+#define DRA7XX_CM_CORE_DEBUG_CFG_OFFSET				0x00f0
+
+/* CM_CORE.CKGEN_CM_CORE register offsets */
+#define DRA7XX_CM_CLKSEL_USB_60MHZ_OFFSET			0x0000
+#define DRA7XX_CM_CLKSEL_USB_60MHZ				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0000)
+#define DRA7XX_CM_CLKMODE_DPLL_PER_OFFSET			0x003c
+#define DRA7XX_CM_CLKMODE_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x003c)
+#define DRA7XX_CM_IDLEST_DPLL_PER_OFFSET			0x0040
+#define DRA7XX_CM_IDLEST_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0040)
+#define DRA7XX_CM_AUTOIDLE_DPLL_PER_OFFSET			0x0044
+#define DRA7XX_CM_AUTOIDLE_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0044)
+#define DRA7XX_CM_CLKSEL_DPLL_PER_OFFSET			0x0048
+#define DRA7XX_CM_CLKSEL_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0048)
+#define DRA7XX_CM_DIV_M2_DPLL_PER_OFFSET			0x004c
+#define DRA7XX_CM_DIV_M2_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x004c)
+#define DRA7XX_CM_DIV_M3_DPLL_PER_OFFSET			0x0050
+#define DRA7XX_CM_DIV_M3_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0050)
+#define DRA7XX_CM_DIV_H11_DPLL_PER_OFFSET			0x0054
+#define DRA7XX_CM_DIV_H11_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0054)
+#define DRA7XX_CM_DIV_H12_DPLL_PER_OFFSET			0x0058
+#define DRA7XX_CM_DIV_H12_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0058)
+#define DRA7XX_CM_DIV_H13_DPLL_PER_OFFSET			0x005c
+#define DRA7XX_CM_DIV_H13_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x005c)
+#define DRA7XX_CM_DIV_H14_DPLL_PER_OFFSET			0x0060
+#define DRA7XX_CM_DIV_H14_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0060)
+#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_PER_OFFSET		0x0064
+#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_PER_OFFSET		0x0068
+#define DRA7XX_CM_CLKMODE_DPLL_USB_OFFSET			0x007c
+#define DRA7XX_CM_CLKMODE_DPLL_USB				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x007c)
+#define DRA7XX_CM_IDLEST_DPLL_USB_OFFSET			0x0080
+#define DRA7XX_CM_IDLEST_DPLL_USB				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0080)
+#define DRA7XX_CM_AUTOIDLE_DPLL_USB_OFFSET			0x0084
+#define DRA7XX_CM_AUTOIDLE_DPLL_USB				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0084)
+#define DRA7XX_CM_CLKSEL_DPLL_USB_OFFSET			0x0088
+#define DRA7XX_CM_CLKSEL_DPLL_USB				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0088)
+#define DRA7XX_CM_DIV_M2_DPLL_USB_OFFSET			0x008c
+#define DRA7XX_CM_DIV_M2_DPLL_USB				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x008c)
+#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_USB_OFFSET		0x00a4
+#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_USB_OFFSET		0x00a8
+#define DRA7XX_CM_CLKDCOLDO_DPLL_USB_OFFSET			0x00b0
+#define DRA7XX_CM_CLKDCOLDO_DPLL_USB				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x00b0)
+#define DRA7XX_CM_CLKMODE_DPLL_PCIE_REF_OFFSET			0x00fc
+#define DRA7XX_CM_CLKMODE_DPLL_PCIE_REF				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x00fc)
+#define DRA7XX_CM_IDLEST_DPLL_PCIE_REF_OFFSET			0x0100
+#define DRA7XX_CM_IDLEST_DPLL_PCIE_REF				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0100)
+#define DRA7XX_CM_AUTOIDLE_DPLL_PCIE_REF_OFFSET			0x0104
+#define DRA7XX_CM_AUTOIDLE_DPLL_PCIE_REF			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0104)
+#define DRA7XX_CM_CLKSEL_DPLL_PCIE_REF_OFFSET			0x0108
+#define DRA7XX_CM_CLKSEL_DPLL_PCIE_REF				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0108)
+#define DRA7XX_CM_DIV_M2_DPLL_PCIE_REF_OFFSET			0x010c
+#define DRA7XX_CM_DIV_M2_DPLL_PCIE_REF				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x010c)
+#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_PCIE_REF_OFFSET		0x0110
+#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_PCIE_REF_OFFSET		0x0114
+#define DRA7XX_CM_CLKMODE_APLL_PCIE_OFFSET			0x0118
+#define DRA7XX_CM_CLKMODE_APLL_PCIE				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0118)
+#define DRA7XX_CM_IDLEST_APLL_PCIE_OFFSET			0x011c
+#define DRA7XX_CM_IDLEST_APLL_PCIE				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x011c)
+#define DRA7XX_CM_DIV_M2_APLL_PCIE_OFFSET			0x0120
+#define DRA7XX_CM_DIV_M2_APLL_PCIE				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0120)
+#define DRA7XX_CM_CLKVCOLDO_APLL_PCIE_OFFSET			0x0124
+#define DRA7XX_CM_CLKVCOLDO_APLL_PCIE				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0124)
+
+/* CM_CORE.COREAON_CM_CORE register offsets */
+#define DRA7XX_CM_COREAON_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_COREAON_SMARTREFLEX_MPU_CLKCTRL_OFFSET	0x0028
+#define DRA7XX_CM_COREAON_SMARTREFLEX_MPU_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x0028)
+#define DRA7XX_CM_COREAON_SMARTREFLEX_CORE_CLKCTRL_OFFSET	0x0038
+#define DRA7XX_CM_COREAON_SMARTREFLEX_CORE_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x0038)
+#define DRA7XX_CM_COREAON_USB_PHY1_CORE_CLKCTRL_OFFSET		0x0040
+#define DRA7XX_CM_COREAON_USB_PHY1_CORE_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x0040)
+#define DRA7XX_CM_COREAON_IO_SRCOMP_CLKCTRL_OFFSET		0x0050
+#define DRA7XX_CM_COREAON_IO_SRCOMP_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x0050)
+#define DRA7XX_CM_COREAON_SMARTREFLEX_GPU_CLKCTRL_OFFSET	0x0058
+#define DRA7XX_CM_COREAON_SMARTREFLEX_GPU_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x0058)
+#define DRA7XX_CM_COREAON_SMARTREFLEX_DSPEVE_CLKCTRL_OFFSET	0x0068
+#define DRA7XX_CM_COREAON_SMARTREFLEX_DSPEVE_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x0068)
+#define DRA7XX_CM_COREAON_SMARTREFLEX_IVAHD_CLKCTRL_OFFSET	0x0078
+#define DRA7XX_CM_COREAON_SMARTREFLEX_IVAHD_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x0078)
+#define DRA7XX_CM_COREAON_USB_PHY2_CORE_CLKCTRL_OFFSET		0x0088
+#define DRA7XX_CM_COREAON_USB_PHY2_CORE_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x0088)
+#define DRA7XX_CM_COREAON_USB_PHY3_CORE_CLKCTRL_OFFSET		0x0098
+#define DRA7XX_CM_COREAON_USB_PHY3_CORE_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x0098)
+#define DRA7XX_CM_COREAON_DUMMY_MODULE1_CLKCTRL_OFFSET		0x00a0
+#define DRA7XX_CM_COREAON_DUMMY_MODULE1_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x00a0)
+#define DRA7XX_CM_COREAON_DUMMY_MODULE2_CLKCTRL_OFFSET		0x00b0
+#define DRA7XX_CM_COREAON_DUMMY_MODULE2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x00b0)
+#define DRA7XX_CM_COREAON_DUMMY_MODULE3_CLKCTRL_OFFSET		0x00c0
+#define DRA7XX_CM_COREAON_DUMMY_MODULE3_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x00c0)
+#define DRA7XX_CM_COREAON_DUMMY_MODULE4_CLKCTRL_OFFSET		0x00d0
+#define DRA7XX_CM_COREAON_DUMMY_MODULE4_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x00d0)
+
+/* CM_CORE.CORE_CM_CORE register offsets */
+#define DRA7XX_CM_L3MAIN1_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_L3MAIN1_DYNAMICDEP_OFFSET			0x0008
+#define DRA7XX_CM_L3MAIN1_L3_MAIN_1_CLKCTRL_OFFSET		0x0020
+#define DRA7XX_CM_L3MAIN1_L3_MAIN_1_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0020)
+#define DRA7XX_CM_L3MAIN1_GPMC_CLKCTRL_OFFSET			0x0028
+#define DRA7XX_CM_L3MAIN1_GPMC_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0028)
+#define DRA7XX_CM_L3MAIN1_MMU_EDMA_CLKCTRL_OFFSET		0x0030
+#define DRA7XX_CM_L3MAIN1_MMU_EDMA_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0030)
+#define DRA7XX_CM_L3MAIN1_OCMC_RAM1_CLKCTRL_OFFSET		0x0050
+#define DRA7XX_CM_L3MAIN1_OCMC_RAM1_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0050)
+#define DRA7XX_CM_L3MAIN1_OCMC_RAM2_CLKCTRL_OFFSET		0x0058
+#define DRA7XX_CM_L3MAIN1_OCMC_RAM2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0058)
+#define DRA7XX_CM_L3MAIN1_OCMC_RAM3_CLKCTRL_OFFSET		0x0060
+#define DRA7XX_CM_L3MAIN1_OCMC_RAM3_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0060)
+#define DRA7XX_CM_L3MAIN1_OCMC_ROM_CLKCTRL_OFFSET		0x0068
+#define DRA7XX_CM_L3MAIN1_OCMC_ROM_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0068)
+#define DRA7XX_CM_L3MAIN1_TPCC_CLKCTRL_OFFSET			0x0070
+#define DRA7XX_CM_L3MAIN1_TPCC_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0070)
+#define DRA7XX_CM_L3MAIN1_TPTC1_CLKCTRL_OFFSET			0x0078
+#define DRA7XX_CM_L3MAIN1_TPTC1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0078)
+#define DRA7XX_CM_L3MAIN1_TPTC2_CLKCTRL_OFFSET			0x0080
+#define DRA7XX_CM_L3MAIN1_TPTC2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0080)
+#define DRA7XX_CM_L3MAIN1_VCP1_CLKCTRL_OFFSET			0x0088
+#define DRA7XX_CM_L3MAIN1_VCP1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0088)
+#define DRA7XX_CM_L3MAIN1_VCP2_CLKCTRL_OFFSET			0x0090
+#define DRA7XX_CM_L3MAIN1_VCP2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0090)
+#define DRA7XX_CM_L3MAIN1_SPARE_CME_CLKCTRL_OFFSET		0x0098
+#define DRA7XX_CM_L3MAIN1_SPARE_CME_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0098)
+#define DRA7XX_CM_L3MAIN1_SPARE_HDMI_CLKCTRL_OFFSET		0x00a0
+#define DRA7XX_CM_L3MAIN1_SPARE_HDMI_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00a0)
+#define DRA7XX_CM_L3MAIN1_SPARE_ICM_CLKCTRL_OFFSET		0x00a8
+#define DRA7XX_CM_L3MAIN1_SPARE_ICM_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00a8)
+#define DRA7XX_CM_L3MAIN1_SPARE_IVA2_CLKCTRL_OFFSET		0x00b0
+#define DRA7XX_CM_L3MAIN1_SPARE_IVA2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00b0)
+#define DRA7XX_CM_L3MAIN1_SPARE_SATA2_CLKCTRL_OFFSET		0x00b8
+#define DRA7XX_CM_L3MAIN1_SPARE_SATA2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00b8)
+#define DRA7XX_CM_L3MAIN1_SPARE_UNKNOWN4_CLKCTRL_OFFSET		0x00c0
+#define DRA7XX_CM_L3MAIN1_SPARE_UNKNOWN4_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00c0)
+#define DRA7XX_CM_L3MAIN1_SPARE_UNKNOWN5_CLKCTRL_OFFSET		0x00c8
+#define DRA7XX_CM_L3MAIN1_SPARE_UNKNOWN5_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00c8)
+#define DRA7XX_CM_L3MAIN1_SPARE_UNKNOWN6_CLKCTRL_OFFSET		0x00d0
+#define DRA7XX_CM_L3MAIN1_SPARE_UNKNOWN6_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00d0)
+#define DRA7XX_CM_L3MAIN1_SPARE_VIDEOPLL1_CLKCTRL_OFFSET	0x00d8
+#define DRA7XX_CM_L3MAIN1_SPARE_VIDEOPLL1_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00d8)
+#define DRA7XX_CM_L3MAIN1_SPARE_VIDEOPLL2_CLKCTRL_OFFSET	0x00f0
+#define DRA7XX_CM_L3MAIN1_SPARE_VIDEOPLL2_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00f0)
+#define DRA7XX_CM_L3MAIN1_SPARE_VIDEOPLL3_CLKCTRL_OFFSET	0x00f8
+#define DRA7XX_CM_L3MAIN1_SPARE_VIDEOPLL3_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00f8)
+#define DRA7XX_CM_IPU2_CLKSTCTRL_OFFSET				0x0200
+#define DRA7XX_CM_IPU2_STATICDEP_OFFSET				0x0204
+#define DRA7XX_CM_IPU2_DYNAMICDEP_OFFSET			0x0208
+#define DRA7XX_CM_IPU2_IPU2_CLKCTRL_OFFSET			0x0220
+#define DRA7XX_CM_IPU2_IPU2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0220)
+#define DRA7XX_CM_DMA_CLKSTCTRL_OFFSET				0x0300
+#define DRA7XX_CM_DMA_STATICDEP_OFFSET				0x0304
+#define DRA7XX_CM_DMA_DYNAMICDEP_OFFSET				0x0308
+#define DRA7XX_CM_DMA_DMA_SYSTEM_CLKCTRL_OFFSET			0x0320
+#define DRA7XX_CM_DMA_DMA_SYSTEM_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0320)
+#define DRA7XX_CM_EMIF_CLKSTCTRL_OFFSET				0x0400
+#define DRA7XX_CM_EMIF_DMM_CLKCTRL_OFFSET			0x0420
+#define DRA7XX_CM_EMIF_DMM_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0420)
+#define DRA7XX_CM_EMIF_EMIF_OCP_FW_CLKCTRL_OFFSET		0x0428
+#define DRA7XX_CM_EMIF_EMIF_OCP_FW_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0428)
+#define DRA7XX_CM_EMIF_EMIF1_CLKCTRL_OFFSET			0x0430
+#define DRA7XX_CM_EMIF_EMIF1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0430)
+#define DRA7XX_CM_EMIF_EMIF2_CLKCTRL_OFFSET			0x0438
+#define DRA7XX_CM_EMIF_EMIF2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0438)
+#define DRA7XX_CM_EMIF_EMIF_DLL_CLKCTRL_OFFSET			0x0440
+#define DRA7XX_CM_EMIF_EMIF_DLL_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0440)
+#define DRA7XX_CM_ATL_ATL_CLKCTRL_OFFSET			0x0500
+#define DRA7XX_CM_ATL_ATL_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0500)
+#define DRA7XX_CM_ATL_CLKSTCTRL_OFFSET				0x0520
+#define DRA7XX_CM_L4CFG_CLKSTCTRL_OFFSET			0x0600
+#define DRA7XX_CM_L4CFG_DYNAMICDEP_OFFSET			0x0608
+#define DRA7XX_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET			0x0620
+#define DRA7XX_CM_L4CFG_L4_CFG_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0620)
+#define DRA7XX_CM_L4CFG_SPINLOCK_CLKCTRL_OFFSET			0x0628
+#define DRA7XX_CM_L4CFG_SPINLOCK_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0628)
+#define DRA7XX_CM_L4CFG_MAILBOX1_CLKCTRL_OFFSET			0x0630
+#define DRA7XX_CM_L4CFG_MAILBOX1_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0630)
+#define DRA7XX_CM_L4CFG_SAR_ROM_CLKCTRL_OFFSET			0x0638
+#define DRA7XX_CM_L4CFG_SAR_ROM_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0638)
+#define DRA7XX_CM_L4CFG_OCP2SCP2_CLKCTRL_OFFSET			0x0640
+#define DRA7XX_CM_L4CFG_OCP2SCP2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0640)
+#define DRA7XX_CM_L4CFG_MAILBOX2_CLKCTRL_OFFSET			0x0648
+#define DRA7XX_CM_L4CFG_MAILBOX2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0648)
+#define DRA7XX_CM_L4CFG_MAILBOX3_CLKCTRL_OFFSET			0x0650
+#define DRA7XX_CM_L4CFG_MAILBOX3_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0650)
+#define DRA7XX_CM_L4CFG_MAILBOX4_CLKCTRL_OFFSET			0x0658
+#define DRA7XX_CM_L4CFG_MAILBOX4_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0658)
+#define DRA7XX_CM_L4CFG_MAILBOX5_CLKCTRL_OFFSET			0x0660
+#define DRA7XX_CM_L4CFG_MAILBOX5_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0660)
+#define DRA7XX_CM_L4CFG_MAILBOX6_CLKCTRL_OFFSET			0x0668
+#define DRA7XX_CM_L4CFG_MAILBOX6_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0668)
+#define DRA7XX_CM_L4CFG_MAILBOX7_CLKCTRL_OFFSET			0x0670
+#define DRA7XX_CM_L4CFG_MAILBOX7_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0670)
+#define DRA7XX_CM_L4CFG_MAILBOX8_CLKCTRL_OFFSET			0x0678
+#define DRA7XX_CM_L4CFG_MAILBOX8_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0678)
+#define DRA7XX_CM_L4CFG_MAILBOX9_CLKCTRL_OFFSET			0x0680
+#define DRA7XX_CM_L4CFG_MAILBOX9_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0680)
+#define DRA7XX_CM_L4CFG_MAILBOX10_CLKCTRL_OFFSET		0x0688
+#define DRA7XX_CM_L4CFG_MAILBOX10_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0688)
+#define DRA7XX_CM_L4CFG_MAILBOX11_CLKCTRL_OFFSET		0x0690
+#define DRA7XX_CM_L4CFG_MAILBOX11_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0690)
+#define DRA7XX_CM_L4CFG_MAILBOX12_CLKCTRL_OFFSET		0x0698
+#define DRA7XX_CM_L4CFG_MAILBOX12_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0698)
+#define DRA7XX_CM_L4CFG_MAILBOX13_CLKCTRL_OFFSET		0x06a0
+#define DRA7XX_CM_L4CFG_MAILBOX13_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x06a0)
+#define DRA7XX_CM_L4CFG_SPARE_SMARTREFLEX_RTC_CLKCTRL_OFFSET	0x06a8
+#define DRA7XX_CM_L4CFG_SPARE_SMARTREFLEX_RTC_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x06a8)
+#define DRA7XX_CM_L4CFG_SPARE_SMARTREFLEX_SDRAM_CLKCTRL_OFFSET	0x06b0
+#define DRA7XX_CM_L4CFG_SPARE_SMARTREFLEX_SDRAM_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x06b0)
+#define DRA7XX_CM_L4CFG_SPARE_SMARTREFLEX_WKUP_CLKCTRL_OFFSET	0x06b8
+#define DRA7XX_CM_L4CFG_SPARE_SMARTREFLEX_WKUP_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x06b8)
+#define DRA7XX_CM_L4CFG_IO_DELAY_BLOCK_CLKCTRL_OFFSET		0x06c0
+#define DRA7XX_CM_L4CFG_IO_DELAY_BLOCK_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x06c0)
+#define DRA7XX_CM_L3INSTR_CLKSTCTRL_OFFSET			0x0700
+#define DRA7XX_CM_L3INSTR_L3_MAIN_2_CLKCTRL_OFFSET		0x0720
+#define DRA7XX_CM_L3INSTR_L3_MAIN_2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0720)
+#define DRA7XX_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET		0x0728
+#define DRA7XX_CM_L3INSTR_L3_INSTR_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0728)
+#define DRA7XX_CM_L3INSTR_OCP_WP_NOC_CLKCTRL_OFFSET		0x0740
+#define DRA7XX_CM_L3INSTR_OCP_WP_NOC_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0740)
+#define DRA7XX_CM_L3INSTR_DLL_AGING_CLKCTRL_OFFSET		0x0748
+#define DRA7XX_CM_L3INSTR_DLL_AGING_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0748)
+#define DRA7XX_CM_L3INSTR_CTRL_MODULE_BANDGAP_CLKCTRL_OFFSET	0x0750
+#define DRA7XX_CM_L3INSTR_CTRL_MODULE_BANDGAP_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0750)
+
+/* CM_CORE.IVA_CM_CORE register offsets */
+#define DRA7XX_CM_IVA_CLKSTCTRL_OFFSET				0x0000
+#define DRA7XX_CM_IVA_STATICDEP_OFFSET				0x0004
+#define DRA7XX_CM_IVA_DYNAMICDEP_OFFSET				0x0008
+#define DRA7XX_CM_IVA_IVA_CLKCTRL_OFFSET			0x0020
+#define DRA7XX_CM_IVA_IVA_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_IVA_INST, 0x0020)
+#define DRA7XX_CM_IVA_SL2_CLKCTRL_OFFSET			0x0028
+#define DRA7XX_CM_IVA_SL2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_IVA_INST, 0x0028)
+
+/* CM_CORE.CAM_CM_CORE register offsets */
+#define DRA7XX_CM_CAM_CLKSTCTRL_OFFSET				0x0000
+#define DRA7XX_CM_CAM_STATICDEP_OFFSET				0x0004
+#define DRA7XX_CM_CAM_VIP1_CLKCTRL_OFFSET			0x0020
+#define DRA7XX_CM_CAM_VIP1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CAM_INST, 0x0020)
+#define DRA7XX_CM_CAM_VIP2_CLKCTRL_OFFSET			0x0028
+#define DRA7XX_CM_CAM_VIP2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CAM_INST, 0x0028)
+#define DRA7XX_CM_CAM_VIP3_CLKCTRL_OFFSET			0x0030
+#define DRA7XX_CM_CAM_VIP3_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CAM_INST, 0x0030)
+#define DRA7XX_CM_CAM_LVDSRX_CLKCTRL_OFFSET			0x0038
+#define DRA7XX_CM_CAM_LVDSRX_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CAM_INST, 0x0038)
+#define DRA7XX_CM_CAM_CSI1_CLKCTRL_OFFSET			0x0040
+#define DRA7XX_CM_CAM_CSI1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CAM_INST, 0x0040)
+#define DRA7XX_CM_CAM_CSI2_CLKCTRL_OFFSET			0x0048
+#define DRA7XX_CM_CAM_CSI2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CAM_INST, 0x0048)
+
+/* CM_CORE.DSS_CM_CORE register offsets */
+#define DRA7XX_CM_DSS_CLKSTCTRL_OFFSET				0x0000
+#define DRA7XX_CM_DSS_STATICDEP_OFFSET				0x0004
+#define DRA7XX_CM_DSS_DYNAMICDEP_OFFSET				0x0008
+#define DRA7XX_CM_DSS_DSS_CLKCTRL_OFFSET			0x0020
+#define DRA7XX_CM_DSS_DSS_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_DSS_INST, 0x0020)
+#define DRA7XX_CM_DSS_BB2D_CLKCTRL_OFFSET			0x0030
+#define DRA7XX_CM_DSS_BB2D_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_DSS_INST, 0x0030)
+#define DRA7XX_CM_DSS_SDVENC_CLKCTRL_OFFSET			0x003c
+#define DRA7XX_CM_DSS_SDVENC_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_DSS_INST, 0x003c)
+
+/* CM_CORE.GPU_CM_CORE register offsets */
+#define DRA7XX_CM_GPU_CLKSTCTRL_OFFSET				0x0000
+#define DRA7XX_CM_GPU_STATICDEP_OFFSET				0x0004
+#define DRA7XX_CM_GPU_DYNAMICDEP_OFFSET				0x0008
+#define DRA7XX_CM_GPU_GPU_CLKCTRL_OFFSET			0x0020
+#define DRA7XX_CM_GPU_GPU_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_GPU_INST, 0x0020)
+
+/* CM_CORE.L3INIT_CM_CORE register offsets */
+#define DRA7XX_CM_L3INIT_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_L3INIT_STATICDEP_OFFSET			0x0004
+#define DRA7XX_CM_L3INIT_DYNAMICDEP_OFFSET			0x0008
+#define DRA7XX_CM_L3INIT_MMC1_CLKCTRL_OFFSET			0x0028
+#define DRA7XX_CM_L3INIT_MMC1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x0028)
+#define DRA7XX_CM_L3INIT_MMC2_CLKCTRL_OFFSET			0x0030
+#define DRA7XX_CM_L3INIT_MMC2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x0030)
+#define DRA7XX_CM_L3INIT_USB_OTG_SS2_CLKCTRL_OFFSET		0x0040
+#define DRA7XX_CM_L3INIT_USB_OTG_SS2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x0040)
+#define DRA7XX_CM_L3INIT_USB_OTG_SS3_CLKCTRL_OFFSET		0x0048
+#define DRA7XX_CM_L3INIT_USB_OTG_SS3_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x0048)
+#define DRA7XX_CM_L3INIT_USB_OTG_SS4_CLKCTRL_OFFSET		0x0050
+#define DRA7XX_CM_L3INIT_USB_OTG_SS4_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x0050)
+#define DRA7XX_CM_L3INIT_MLB_SS_CLKCTRL_OFFSET			0x0058
+#define DRA7XX_CM_L3INIT_MLB_SS_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x0058)
+#define DRA7XX_CM_L3INIT_IEEE1500_2_OCP_CLKCTRL_OFFSET		0x0078
+#define DRA7XX_CM_L3INIT_IEEE1500_2_OCP_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x0078)
+#define DRA7XX_CM_L3INIT_SATA_CLKCTRL_OFFSET			0x0088
+#define DRA7XX_CM_L3INIT_SATA_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x0088)
+#define DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET				0x00a0
+#define DRA7XX_CM_PCIE_STATICDEP_OFFSET				0x00a4
+#define DRA7XX_CM_GMAC_CLKSTCTRL_OFFSET				0x00c0
+#define DRA7XX_CM_GMAC_STATICDEP_OFFSET				0x00c4
+#define DRA7XX_CM_GMAC_DYNAMICDEP_OFFSET			0x00c8
+#define DRA7XX_CM_GMAC_GMAC_CLKCTRL_OFFSET			0x00d0
+#define DRA7XX_CM_GMAC_GMAC_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x00d0)
+#define DRA7XX_CM_L3INIT_OCP2SCP1_CLKCTRL_OFFSET		0x00e0
+#define DRA7XX_CM_L3INIT_OCP2SCP1_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x00e0)
+#define DRA7XX_CM_L3INIT_OCP2SCP3_CLKCTRL_OFFSET		0x00e8
+#define DRA7XX_CM_L3INIT_OCP2SCP3_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x00e8)
+#define DRA7XX_CM_L3INIT_USB_OTG_SS1_CLKCTRL_OFFSET		0x00f0
+#define DRA7XX_CM_L3INIT_USB_OTG_SS1_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x00f0)
+
+/* CM_CORE.CUSTEFUSE_CM_CORE register offsets */
+#define DRA7XX_CM_CUSTEFUSE_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_CUSTEFUSE_EFUSE_CTRL_CUST_CLKCTRL_OFFSET	0x0020
+#define DRA7XX_CM_CUSTEFUSE_EFUSE_CTRL_CUST_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CUSTEFUSE_INST, 0x0020)
+
+/* CM_CORE.L4PER_CM_CORE register offsets */
+#define DRA7XX_CM_L4PER_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_L4PER_DYNAMICDEP_OFFSET			0x0008
+#define DRA7XX_CM_L4PER2_L4_PER2_CLKCTRL_OFFSET			0x000c
+#define DRA7XX_CM_L4PER2_L4_PER2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x000c)
+#define DRA7XX_CM_L4PER3_L4_PER3_CLKCTRL_OFFSET			0x0014
+#define DRA7XX_CM_L4PER3_L4_PER3_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0014)
+#define DRA7XX_CM_L4PER2_PRUSS1_CLKCTRL_OFFSET			0x0018
+#define DRA7XX_CM_L4PER2_PRUSS1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0018)
+#define DRA7XX_CM_L4PER2_PRUSS2_CLKCTRL_OFFSET			0x0020
+#define DRA7XX_CM_L4PER2_PRUSS2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0020)
+#define DRA7XX_CM_L4PER_TIMER10_CLKCTRL_OFFSET			0x0028
+#define DRA7XX_CM_L4PER_TIMER10_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0028)
+#define DRA7XX_CM_L4PER_TIMER11_CLKCTRL_OFFSET			0x0030
+#define DRA7XX_CM_L4PER_TIMER11_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0030)
+#define DRA7XX_CM_L4PER_TIMER2_CLKCTRL_OFFSET			0x0038
+#define DRA7XX_CM_L4PER_TIMER2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0038)
+#define DRA7XX_CM_L4PER_TIMER3_CLKCTRL_OFFSET			0x0040
+#define DRA7XX_CM_L4PER_TIMER3_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0040)
+#define DRA7XX_CM_L4PER_TIMER4_CLKCTRL_OFFSET			0x0048
+#define DRA7XX_CM_L4PER_TIMER4_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0048)
+#define DRA7XX_CM_L4PER_TIMER9_CLKCTRL_OFFSET			0x0050
+#define DRA7XX_CM_L4PER_TIMER9_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0050)
+#define DRA7XX_CM_L4PER_ELM_CLKCTRL_OFFSET			0x0058
+#define DRA7XX_CM_L4PER_ELM_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0058)
+#define DRA7XX_CM_L4PER_GPIO2_CLKCTRL_OFFSET			0x0060
+#define DRA7XX_CM_L4PER_GPIO2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0060)
+#define DRA7XX_CM_L4PER_GPIO3_CLKCTRL_OFFSET			0x0068
+#define DRA7XX_CM_L4PER_GPIO3_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0068)
+#define DRA7XX_CM_L4PER_GPIO4_CLKCTRL_OFFSET			0x0070
+#define DRA7XX_CM_L4PER_GPIO4_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0070)
+#define DRA7XX_CM_L4PER_GPIO5_CLKCTRL_OFFSET			0x0078
+#define DRA7XX_CM_L4PER_GPIO5_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0078)
+#define DRA7XX_CM_L4PER_GPIO6_CLKCTRL_OFFSET			0x0080
+#define DRA7XX_CM_L4PER_GPIO6_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0080)
+#define DRA7XX_CM_L4PER_HDQ1W_CLKCTRL_OFFSET			0x0088
+#define DRA7XX_CM_L4PER_HDQ1W_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0088)
+#define DRA7XX_CM_L4PER2_PWMSS2_CLKCTRL_OFFSET			0x0090
+#define DRA7XX_CM_L4PER2_PWMSS2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0090)
+#define DRA7XX_CM_L4PER2_PWMSS3_CLKCTRL_OFFSET			0x0098
+#define DRA7XX_CM_L4PER2_PWMSS3_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0098)
+#define DRA7XX_CM_L4PER_I2C1_CLKCTRL_OFFSET			0x00a0
+#define DRA7XX_CM_L4PER_I2C1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00a0)
+#define DRA7XX_CM_L4PER_I2C2_CLKCTRL_OFFSET			0x00a8
+#define DRA7XX_CM_L4PER_I2C2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00a8)
+#define DRA7XX_CM_L4PER_I2C3_CLKCTRL_OFFSET			0x00b0
+#define DRA7XX_CM_L4PER_I2C3_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00b0)
+#define DRA7XX_CM_L4PER_I2C4_CLKCTRL_OFFSET			0x00b8
+#define DRA7XX_CM_L4PER_I2C4_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00b8)
+#define DRA7XX_CM_L4PER_L4_PER1_CLKCTRL_OFFSET			0x00c0
+#define DRA7XX_CM_L4PER_L4_PER1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00c0)
+#define DRA7XX_CM_L4PER2_PWMSS1_CLKCTRL_OFFSET			0x00c4
+#define DRA7XX_CM_L4PER2_PWMSS1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00c4)
+#define DRA7XX_CM_L4PER3_TIMER13_CLKCTRL_OFFSET			0x00c8
+#define DRA7XX_CM_L4PER3_TIMER13_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00c8)
+#define DRA7XX_CM_L4PER3_TIMER14_CLKCTRL_OFFSET			0x00d0
+#define DRA7XX_CM_L4PER3_TIMER14_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00d0)
+#define DRA7XX_CM_L4PER3_TIMER15_CLKCTRL_OFFSET			0x00d8
+#define DRA7XX_CM_L4PER3_TIMER15_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00d8)
+#define DRA7XX_CM_L4PER_MCSPI1_CLKCTRL_OFFSET			0x00f0
+#define DRA7XX_CM_L4PER_MCSPI1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00f0)
+#define DRA7XX_CM_L4PER_MCSPI2_CLKCTRL_OFFSET			0x00f8
+#define DRA7XX_CM_L4PER_MCSPI2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00f8)
+#define DRA7XX_CM_L4PER_MCSPI3_CLKCTRL_OFFSET			0x0100
+#define DRA7XX_CM_L4PER_MCSPI3_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0100)
+#define DRA7XX_CM_L4PER_MCSPI4_CLKCTRL_OFFSET			0x0108
+#define DRA7XX_CM_L4PER_MCSPI4_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0108)
+#define DRA7XX_CM_L4PER_GPIO7_CLKCTRL_OFFSET			0x0110
+#define DRA7XX_CM_L4PER_GPIO7_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0110)
+#define DRA7XX_CM_L4PER_GPIO8_CLKCTRL_OFFSET			0x0118
+#define DRA7XX_CM_L4PER_GPIO8_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0118)
+#define DRA7XX_CM_L4PER_MMC3_CLKCTRL_OFFSET			0x0120
+#define DRA7XX_CM_L4PER_MMC3_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0120)
+#define DRA7XX_CM_L4PER_MMC4_CLKCTRL_OFFSET			0x0128
+#define DRA7XX_CM_L4PER_MMC4_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0128)
+#define DRA7XX_CM_L4PER3_TIMER16_CLKCTRL_OFFSET			0x0130
+#define DRA7XX_CM_L4PER3_TIMER16_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0130)
+#define DRA7XX_CM_L4PER2_QSPI_CLKCTRL_OFFSET			0x0138
+#define DRA7XX_CM_L4PER2_QSPI_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0138)
+#define DRA7XX_CM_L4PER_UART1_CLKCTRL_OFFSET			0x0140
+#define DRA7XX_CM_L4PER_UART1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0140)
+#define DRA7XX_CM_L4PER_UART2_CLKCTRL_OFFSET			0x0148
+#define DRA7XX_CM_L4PER_UART2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0148)
+#define DRA7XX_CM_L4PER_UART3_CLKCTRL_OFFSET			0x0150
+#define DRA7XX_CM_L4PER_UART3_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0150)
+#define DRA7XX_CM_L4PER_UART4_CLKCTRL_OFFSET			0x0158
+#define DRA7XX_CM_L4PER_UART4_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0158)
+#define DRA7XX_CM_L4PER2_MCASP2_CLKCTRL_OFFSET			0x0160
+#define DRA7XX_CM_L4PER2_MCASP2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0160)
+#define DRA7XX_CM_L4PER2_MCASP3_CLKCTRL_OFFSET			0x0168
+#define DRA7XX_CM_L4PER2_MCASP3_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0168)
+#define DRA7XX_CM_L4PER_UART5_CLKCTRL_OFFSET			0x0170
+#define DRA7XX_CM_L4PER_UART5_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0170)
+#define DRA7XX_CM_L4PER2_MCASP5_CLKCTRL_OFFSET			0x0178
+#define DRA7XX_CM_L4PER2_MCASP5_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0178)
+#define DRA7XX_CM_L4SEC_CLKSTCTRL_OFFSET			0x0180
+#define DRA7XX_CM_L4SEC_STATICDEP_OFFSET			0x0184
+#define DRA7XX_CM_L4SEC_DYNAMICDEP_OFFSET			0x0188
+#define DRA7XX_CM_L4PER2_MCASP8_CLKCTRL_OFFSET			0x0190
+#define DRA7XX_CM_L4PER2_MCASP8_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0190)
+#define DRA7XX_CM_L4PER2_MCASP4_CLKCTRL_OFFSET			0x0198
+#define DRA7XX_CM_L4PER2_MCASP4_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0198)
+#define DRA7XX_CM_L4SEC_AES1_CLKCTRL_OFFSET			0x01a0
+#define DRA7XX_CM_L4SEC_AES1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01a0)
+#define DRA7XX_CM_L4SEC_AES2_CLKCTRL_OFFSET			0x01a8
+#define DRA7XX_CM_L4SEC_AES2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01a8)
+#define DRA7XX_CM_L4SEC_DES3DES_CLKCTRL_OFFSET			0x01b0
+#define DRA7XX_CM_L4SEC_DES3DES_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01b0)
+#define DRA7XX_CM_L4SEC_FPKA_CLKCTRL_OFFSET			0x01b8
+#define DRA7XX_CM_L4SEC_FPKA_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01b8)
+#define DRA7XX_CM_L4SEC_RNG_CLKCTRL_OFFSET			0x01c0
+#define DRA7XX_CM_L4SEC_RNG_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01c0)
+#define DRA7XX_CM_L4SEC_SHA2MD51_CLKCTRL_OFFSET			0x01c8
+#define DRA7XX_CM_L4SEC_SHA2MD51_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01c8)
+#define DRA7XX_CM_L4PER2_UART7_CLKCTRL_OFFSET			0x01d0
+#define DRA7XX_CM_L4PER2_UART7_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01d0)
+#define DRA7XX_CM_L4SEC_DMA_CRYPTO_CLKCTRL_OFFSET		0x01d8
+#define DRA7XX_CM_L4SEC_DMA_CRYPTO_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01d8)
+#define DRA7XX_CM_L4PER2_UART8_CLKCTRL_OFFSET			0x01e0
+#define DRA7XX_CM_L4PER2_UART8_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01e0)
+#define DRA7XX_CM_L4PER2_UART9_CLKCTRL_OFFSET			0x01e8
+#define DRA7XX_CM_L4PER2_UART9_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01e8)
+#define DRA7XX_CM_L4PER2_DCAN2_CLKCTRL_OFFSET			0x01f0
+#define DRA7XX_CM_L4PER2_DCAN2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01f0)
+#define DRA7XX_CM_L4SEC_SHA2MD52_CLKCTRL_OFFSET			0x01f8
+#define DRA7XX_CM_L4SEC_SHA2MD52_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01f8)
+#define DRA7XX_CM_L4PER2_CLKSTCTRL_OFFSET			0x01fc
+#define DRA7XX_CM_L4PER2_DYNAMICDEP_OFFSET			0x0200
+#define DRA7XX_CM_L4PER2_MCASP6_CLKCTRL_OFFSET			0x0204
+#define DRA7XX_CM_L4PER2_MCASP6_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0204)
+#define DRA7XX_CM_L4PER2_MCASP7_CLKCTRL_OFFSET			0x0208
+#define DRA7XX_CM_L4PER2_MCASP7_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0208)
+#define DRA7XX_CM_L4PER2_STATICDEP_OFFSET			0x020c
+#define DRA7XX_CM_L4PER3_CLKSTCTRL_OFFSET			0x0210
+#define DRA7XX_CM_L4PER3_DYNAMICDEP_OFFSET			0x0214
+
+#endif
diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c
index 6774a53..ce25abb 100644
--- a/arch/arm/mach-omap2/cm2xxx.c
+++ b/arch/arm/mach-omap2/cm2xxx.c
@@ -327,6 +327,73 @@ struct clkdm_ops omap2_clkdm_operations = {
 	.clkdm_clk_disable	= omap2xxx_clkdm_clk_disable,
 };
 
+int omap2xxx_cm_fclks_active(void)
+{
+	u32 f1, f2;
+
+	f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+
+	return (f1 | f2) ? 1 : 0;
+}
+
+int omap2xxx_cm_mpu_retention_allowed(void)
+{
+	u32 l;
+
+	/* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
+	l = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	if (l & (OMAP2420_EN_MMC_MASK | OMAP24XX_EN_UART2_MASK |
+		 OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_MCSPI2_MASK |
+		 OMAP24XX_EN_MCSPI1_MASK | OMAP24XX_EN_DSS1_MASK))
+		return 0;
+	/* Check for UART3. */
+	l = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+	if (l & OMAP24XX_EN_UART3_MASK)
+		return 0;
+
+	return 1;
+}
+
+u32 omap2xxx_cm_get_core_clk_src(void)
+{
+	u32 v;
+
+	v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	v &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+	return v;
+}
+
+u32 omap2xxx_cm_get_core_pll_config(void)
+{
+	return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+}
+
+u32 omap2xxx_cm_get_pll_config(void)
+{
+	return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
+}
+
+u32 omap2xxx_cm_get_pll_status(void)
+{
+	return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+}
+
+void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core, u32 mdm)
+{
+	u32 tmp;
+
+	omap2_cm_write_mod_reg(mpu, MPU_MOD, CM_CLKSEL);
+	omap2_cm_write_mod_reg(dsp, OMAP24XX_DSP_MOD, CM_CLKSEL);
+	omap2_cm_write_mod_reg(gfx, GFX_MOD, CM_CLKSEL);
+	tmp = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) &
+		OMAP24XX_CLKSEL_DSS2_MASK;
+	omap2_cm_write_mod_reg(core | tmp, CORE_MOD, CM_CLKSEL1);
+	if (cpu_is_omap2430())
+		omap2_cm_write_mod_reg(mdm, OMAP2430_MDM_MOD, CM_CLKSEL);
+}
+
 /*
  *
  */
diff --git a/arch/arm/mach-omap2/cm2xxx.h b/arch/arm/mach-omap2/cm2xxx.h
index 4cbb39b..891d81c 100644
--- a/arch/arm/mach-omap2/cm2xxx.h
+++ b/arch/arm/mach-omap2/cm2xxx.h
@@ -62,6 +62,14 @@ extern int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
 					 u8 idlest_shift);
 extern int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg,
 					s16 *prcm_inst, u8 *idlest_reg_id);
+extern int omap2xxx_cm_fclks_active(void);
+extern int omap2xxx_cm_mpu_retention_allowed(void);
+extern u32 omap2xxx_cm_get_core_clk_src(void);
+extern u32 omap2xxx_cm_get_core_pll_config(void);
+extern u32 omap2xxx_cm_get_pll_config(void);
+extern u32 omap2xxx_cm_get_pll_status(void);
+extern void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core,
+					 u32 mdm);
 
 extern int __init omap2xxx_cm_init(void);
 
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index 325a515..40a22e5 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -48,13 +48,13 @@
 /* Private functions */
 
 /* Read a register in a CM instance */
-static inline u32 am33xx_cm_read_reg(s16 inst, u16 idx)
+static inline u32 am33xx_cm_read_reg(u16 inst, u16 idx)
 {
 	return __raw_readl(cm_base + inst + idx);
 }
 
 /* Write into a register in a CM */
-static inline void am33xx_cm_write_reg(u32 val, s16 inst, u16 idx)
+static inline void am33xx_cm_write_reg(u32 val, u16 inst, u16 idx)
 {
 	__raw_writel(val, cm_base + inst + idx);
 }
@@ -138,7 +138,7 @@ static bool _is_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs)
  * @c must be the unshifted value for CLKTRCTRL - i.e., this function
  * will handle the shift itself.
  */
-static void _clktrctrl_write(u8 c, s16 inst, u16 cdoffs)
+static void _clktrctrl_write(u8 c, u16 inst, u16 cdoffs)
 {
 	u32 v;
 
@@ -158,7 +158,7 @@ static void _clktrctrl_write(u8 c, s16 inst, u16 cdoffs)
  * Returns true if the clockdomain referred to by (@inst, @cdoffs)
  * is in hardware-supervised idle mode, or 0 otherwise.
  */
-bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs)
+bool am33xx_cm_is_clkdm_in_hwsup(u16 inst, u16 cdoffs)
 {
 	u32 v;
 
@@ -177,7 +177,7 @@ bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs)
  * Put a clockdomain referred to by (@inst, @cdoffs) into
  * hardware-supervised idle mode.  No return value.
  */
-void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs)
+void am33xx_cm_clkdm_enable_hwsup(u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, inst, cdoffs);
 }
@@ -191,7 +191,7 @@ void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs)
  * software-supervised idle mode, i.e., controlled manually by the
  * Linux OMAP clockdomain code.  No return value.
  */
-void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs)
+void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, inst, cdoffs);
 }
@@ -204,7 +204,7 @@ void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs)
  * Put a clockdomain referred to by (@inst, @cdoffs) into idle
  * No return value.
  */
-void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs)
+void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, inst, cdoffs);
 }
@@ -217,7 +217,7 @@ void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs)
  * Take a clockdomain referred to by (@inst, @cdoffs) out of idle,
  * waking it up.  No return value.
  */
-void am33xx_cm_clkdm_force_wakeup(s16 inst, u16 cdoffs)
+void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, inst, cdoffs);
 }
diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h
index 9d1f4fc..cfb8891 100644
--- a/arch/arm/mach-omap2/cm33xx.h
+++ b/arch/arm/mach-omap2/cm33xx.h
@@ -377,13 +377,13 @@
 
 
 #ifndef __ASSEMBLER__
-extern bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs);
-extern void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs);
-extern void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs);
-extern void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs);
-extern void am33xx_cm_clkdm_force_wakeup(s16 inst, u16 cdoffs);
+bool am33xx_cm_is_clkdm_in_hwsup(u16 inst, u16 cdoffs);
+void am33xx_cm_clkdm_enable_hwsup(u16 inst, u16 cdoffs);
+void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs);
+void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs);
+void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs);
 
-#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
+#ifdef CONFIG_SOC_AM33XX
 extern int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs,
 					u16 clkctrl_offs);
 extern void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs,
diff --git a/arch/arm/mach-omap2/cm3xxx.c b/arch/arm/mach-omap2/cm3xxx.c
index 9061c30..f6f0288 100644
--- a/arch/arm/mach-omap2/cm3xxx.c
+++ b/arch/arm/mach-omap2/cm3xxx.c
@@ -636,6 +636,28 @@ void omap3_cm_restore_context(void)
 			       OMAP3_CM_CLKOUT_CTRL_OFFSET);
 }
 
+void omap3_cm_save_scratchpad_contents(u32 *ptr)
+{
+	*ptr++ = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL);
+	*ptr++ = omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
+	*ptr++ = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+
+	/*
+	 * As per erratum i671, ROM code does not respect the PER DPLL
+	 * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1.
+	 * Then,  in anycase, clear these bits to avoid extra latencies.
+	 */
+	*ptr++ = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) &
+		~OMAP3430_AUTO_PERIPH_DPLL_MASK;
+	*ptr++ = omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL);
+	*ptr++ = omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL2_PLL);
+	*ptr++ = omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL3);
+	*ptr++ = omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKEN_PLL);
+	*ptr++ = omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL);
+	*ptr++ = omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL);
+	*ptr++ = omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL);
+}
+
 /*
  *
  */
diff --git a/arch/arm/mach-omap2/cm3xxx.h b/arch/arm/mach-omap2/cm3xxx.h
index e8e146f..8224c91 100644
--- a/arch/arm/mach-omap2/cm3xxx.h
+++ b/arch/arm/mach-omap2/cm3xxx.h
@@ -83,6 +83,7 @@ extern int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg,
 
 extern void omap3_cm_save_context(void);
 extern void omap3_cm_restore_context(void);
+extern void omap3_cm_save_scratchpad_contents(u32 *ptr);
 
 extern int __init omap3xxx_cm_init(void);
 
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index f0290f5..731ca13 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -111,7 +111,7 @@ static bool _is_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs)
 /* Public functions */
 
 /* Read a register in a CM instance */
-u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx)
+u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx)
 {
 	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
 	       part == OMAP4430_INVALID_PRCM_PARTITION ||
@@ -120,7 +120,7 @@ u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx)
 }
 
 /* Write into a register in a CM instance */
-void omap4_cminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx)
+void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx)
 {
 	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
 	       part == OMAP4430_INVALID_PRCM_PARTITION ||
@@ -129,7 +129,7 @@ void omap4_cminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx)
 }
 
 /* Read-modify-write a register in CM1. Caller must lock */
-u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst,
+u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, u16 inst,
 				   s16 idx)
 {
 	u32 v;
@@ -142,12 +142,12 @@ u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst,
 	return v;
 }
 
-u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, s16 inst, s16 idx)
+u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, u16 inst, s16 idx)
 {
 	return omap4_cminst_rmw_inst_reg_bits(bits, bits, part, inst, idx);
 }
 
-u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, s16 inst, s16 idx)
+u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, u16 inst, s16 idx)
 {
 	return omap4_cminst_rmw_inst_reg_bits(bits, 0x0, part, inst, idx);
 }
@@ -177,7 +177,7 @@ u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx, u32 mask)
  * @c must be the unshifted value for CLKTRCTRL - i.e., this function
  * will handle the shift itself.
  */
-static void _clktrctrl_write(u8 c, u8 part, s16 inst, u16 cdoffs)
+static void _clktrctrl_write(u8 c, u8 part, u16 inst, u16 cdoffs)
 {
 	u32 v;
 
@@ -196,7 +196,7 @@ static void _clktrctrl_write(u8 c, u8 part, s16 inst, u16 cdoffs)
  * Returns true if the clockdomain referred to by (@part, @inst, @cdoffs)
  * is in hardware-supervised idle mode, or 0 otherwise.
  */
-bool omap4_cminst_is_clkdm_in_hwsup(u8 part, s16 inst, u16 cdoffs)
+bool omap4_cminst_is_clkdm_in_hwsup(u8 part, u16 inst, u16 cdoffs)
 {
 	u32 v;
 
@@ -216,7 +216,7 @@ bool omap4_cminst_is_clkdm_in_hwsup(u8 part, s16 inst, u16 cdoffs)
  * Put a clockdomain referred to by (@part, @inst, @cdoffs) into
  * hardware-supervised idle mode.  No return value.
  */
-void omap4_cminst_clkdm_enable_hwsup(u8 part, s16 inst, u16 cdoffs)
+void omap4_cminst_clkdm_enable_hwsup(u8 part, u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, part, inst, cdoffs);
 }
@@ -231,7 +231,7 @@ void omap4_cminst_clkdm_enable_hwsup(u8 part, s16 inst, u16 cdoffs)
  * software-supervised idle mode, i.e., controlled manually by the
  * Linux OMAP clockdomain code.  No return value.
  */
-void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs)
+void omap4_cminst_clkdm_disable_hwsup(u8 part, u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, part, inst, cdoffs);
 }
@@ -245,7 +245,7 @@ void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs)
  * Take a clockdomain referred to by (@part, @inst, @cdoffs) out of idle,
  * waking it up.  No return value.
  */
-void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs)
+void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, part, inst, cdoffs);
 }
@@ -483,3 +483,12 @@ struct clkdm_ops omap4_clkdm_operations = {
 	.clkdm_clk_enable	= omap4_clkdm_clk_enable,
 	.clkdm_clk_disable	= omap4_clkdm_clk_disable,
 };
+
+struct clkdm_ops am43xx_clkdm_operations = {
+	.clkdm_sleep		= omap4_clkdm_sleep,
+	.clkdm_wakeup		= omap4_clkdm_wakeup,
+	.clkdm_allow_idle	= omap4_clkdm_allow_idle,
+	.clkdm_deny_idle	= omap4_clkdm_deny_idle,
+	.clkdm_clk_enable	= omap4_clkdm_clk_enable,
+	.clkdm_clk_disable	= omap4_clkdm_clk_disable,
+};
diff --git a/arch/arm/mach-omap2/cminst44xx.h b/arch/arm/mach-omap2/cminst44xx.h
index bd7bab8..7f56ea4 100644
--- a/arch/arm/mach-omap2/cminst44xx.h
+++ b/arch/arm/mach-omap2/cminst44xx.h
@@ -11,11 +11,11 @@
 #ifndef __ARCH_ASM_MACH_OMAP2_CMINST44XX_H
 #define __ARCH_ASM_MACH_OMAP2_CMINST44XX_H
 
-extern bool omap4_cminst_is_clkdm_in_hwsup(u8 part, s16 inst, u16 cdoffs);
-extern void omap4_cminst_clkdm_enable_hwsup(u8 part, s16 inst, u16 cdoffs);
-extern void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs);
-extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs);
-extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs);
+bool omap4_cminst_is_clkdm_in_hwsup(u8 part, u16 inst, u16 cdoffs);
+void omap4_cminst_clkdm_enable_hwsup(u8 part, u16 inst, u16 cdoffs);
+void omap4_cminst_clkdm_disable_hwsup(u8 part, u16 inst, u16 cdoffs);
+void omap4_cminst_clkdm_force_sleep(u8 part, u16 inst, u16 cdoffs);
+void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs);
 extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs);
 extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
 					 u16 clkctrl_offs);
@@ -27,14 +27,14 @@ extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
  * In an ideal world, we would not export these low-level functions,
  * but this will probably take some time to fix properly
  */
-extern u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx);
-extern void omap4_cminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx);
-extern u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part,
-					   s16 inst, s16 idx);
-extern u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, s16 inst,
-					   s16 idx);
-extern u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, s16 inst,
-					   s16 idx);
+u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx);
+void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx);
+u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part,
+				   u16 inst, s16 idx);
+u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, u16 inst,
+				   s16 idx);
+u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, u16 inst,
+				     s16 idx);
 extern u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx,
 					   u32 mask);
 
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index dfcc182..f7644fe 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -98,6 +98,7 @@ void am35xx_init_early(void);
 void ti81xx_init_early(void);
 void am33xx_init_early(void);
 void am43xx_init_early(void);
+void am43xx_init_late(void);
 void omap4430_init_early(void);
 void omap5_init_early(void);
 void omap3_init_late(void);	/* Do not use this one */
@@ -109,7 +110,11 @@ void omap35xx_init_late(void);
 void omap3630_init_late(void);
 void am35xx_init_late(void);
 void ti81xx_init_late(void);
+void am33xx_init_late(void);
+void omap5_init_late(void);
 int omap2_common_pm_late_init(void);
+void dra7xx_init_early(void);
+void dra7xx_init_late(void);
 
 #ifdef CONFIG_SOC_BUS
 void omap_soc_device_init(void);
@@ -287,6 +292,9 @@ static inline void omap4_cpu_resume(void)
 
 #endif
 
+void pdata_quirks_init(struct of_device_id *);
+void omap_pcs_legacy_init(int irq, void (*rearm)(void));
+
 struct omap_sdrc_params;
 extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 				      struct omap_sdrc_params *sdrc_cs1);
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 31e0dfe..44bb4d5 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -46,17 +46,7 @@ struct omap3_scratchpad {
 struct omap3_scratchpad_prcm_block {
 	u32 prm_clksrc_ctrl;
 	u32 prm_clksel;
-	u32 cm_clksel_core;
-	u32 cm_clksel_wkup;
-	u32 cm_clken_pll;
-	u32 cm_autoidle_pll;
-	u32 cm_clksel1_pll;
-	u32 cm_clksel2_pll;
-	u32 cm_clksel3_pll;
-	u32 cm_clken_pll_mpu;
-	u32 cm_autoidle_pll_mpu;
-	u32 cm_clksel1_pll_mpu;
-	u32 cm_clksel2_pll_mpu;
+	u32 cm_contents[11];
 	u32 prcm_block_size;
 };
 
@@ -347,34 +337,9 @@ void omap3_save_scratchpad_contents(void)
 	prcm_block_contents.prm_clksel =
 		omap2_prm_read_mod_reg(OMAP3430_CCR_MOD,
 				       OMAP3_PRM_CLKSEL_OFFSET);
-	prcm_block_contents.cm_clksel_core =
-			omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL);
-	prcm_block_contents.cm_clksel_wkup =
-			omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
-	prcm_block_contents.cm_clken_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
-	/*
-	 * As per erratum i671, ROM code does not respect the PER DPLL
-	 * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1.
-	 * Then,  in anycase, clear these bits to avoid extra latencies.
-	 */
-	prcm_block_contents.cm_autoidle_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) &
-			~OMAP3430_AUTO_PERIPH_DPLL_MASK;
-	prcm_block_contents.cm_clksel1_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL);
-	prcm_block_contents.cm_clksel2_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL2_PLL);
-	prcm_block_contents.cm_clksel3_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL3);
-	prcm_block_contents.cm_clken_pll_mpu =
-			omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKEN_PLL);
-	prcm_block_contents.cm_autoidle_pll_mpu =
-			omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL);
-	prcm_block_contents.cm_clksel1_pll_mpu =
-			omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL);
-	prcm_block_contents.cm_clksel2_pll_mpu =
-			omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL);
+
+	omap3_cm_save_scratchpad_contents(prcm_block_contents.cm_contents);
+
 	prcm_block_contents.prcm_block_size = 0x0;
 
 	/* Populate the SDRC block contents */
@@ -604,4 +569,15 @@ int omap3_ctrl_save_padconf(void)
 	return 0;
 }
 
+/**
+ * omap3_ctrl_set_iva_bootmode_idle - sets the IVA2 bootmode to idle
+ *
+ * Sets the bootmode for IVA2 to idle. This is needed by the PM code to
+ * force disable IVA2 so that it does not prevent any low-power states.
+ */
+void omap3_ctrl_set_iva_bootmode_idle(void)
+{
+	omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
+			 OMAP343X_CONTROL_IVA2_BOOTMOD);
+}
 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index f7d7c2e..da05480 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -427,6 +427,7 @@ extern void omap_ctrl_write_dsp_boot_addr(u32 bootaddr);
 extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode);
 extern void omap3630_ctrl_disable_rta(void);
 extern int omap3_ctrl_save_padconf(void);
+extern void omap3_ctrl_set_iva_bootmode_idle(void);
 extern void omap2_set_globals_control(void __iomem *ctrl,
 				      void __iomem *ctrl_pad);
 #else
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index c443f2e..4c8982a 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -143,7 +143,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 	 * Call idle CPU cluster PM exit notifier chain
 	 * to restore GIC and wakeupgen context.
 	 */
-	if ((cx->mpu_state == PWRDM_POWER_RET) &&
+	if (dev->cpu == 0 && (cx->mpu_state == PWRDM_POWER_RET) &&
 		(cx->mpu_logic_state == PWRDM_POWER_OFF))
 		cpu_cluster_pm_exit();
 
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 3c1279f..0dd6398 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -19,7 +19,6 @@
 #include <linux/of.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/omap4-keypad.h>
-#include <linux/wl12xx.h>
 #include <linux/platform_data/mailbox-omap.h>
 
 #include <asm/mach-types.h>
@@ -37,6 +36,7 @@
 #include "mux.h"
 #include "control.h"
 #include "devices.h"
+#include "display.h"
 
 #define L3_MODULES_MAX_LEN 12
 #define L3_MODULES 3
@@ -327,44 +327,6 @@ static void omap_init_audio(void)
 static inline void omap_init_audio(void) {}
 #endif
 
-#if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \
-		defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE)
-
-static void __init omap_init_mcpdm(void)
-{
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-
-	oh = omap_hwmod_lookup("mcpdm");
-	if (!oh)
-		return;
-
-	pdev = omap_device_build("omap-mcpdm", -1, oh, NULL, 0);
-	WARN(IS_ERR(pdev), "Can't build omap_device for omap-mcpdm.\n");
-}
-#else
-static inline void omap_init_mcpdm(void) {}
-#endif
-
-#if defined(CONFIG_SND_OMAP_SOC_DMIC) || \
-		defined(CONFIG_SND_OMAP_SOC_DMIC_MODULE)
-
-static void __init omap_init_dmic(void)
-{
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-
-	oh = omap_hwmod_lookup("dmic");
-	if (!oh)
-		return;
-
-	pdev = omap_device_build("omap-dmic", -1, oh, NULL, 0);
-	WARN(IS_ERR(pdev), "Can't build omap_device for omap-dmic.\n");
-}
-#else
-static inline void omap_init_dmic(void) {}
-#endif
-
 #if defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI) || \
 		defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI_MODULE)
 
@@ -504,47 +466,13 @@ static struct platform_device omap_vout_device = {
 	.resource 	= &omap_vout_resource[0],
 	.id		= -1,
 };
-static void omap_init_vout(void)
-{
-	if (platform_device_register(&omap_vout_device) < 0)
-		printk(KERN_ERR "Unable to register OMAP-VOUT device\n");
-}
-#else
-static inline void omap_init_vout(void) {}
-#endif
-
-#if IS_ENABLED(CONFIG_WL12XX)
 
-static struct wl12xx_platform_data wl12xx __initdata;
-
-void __init omap_init_wl12xx_of(void)
+int __init omap_init_vout(void)
 {
-	int ret;
-
-	if (!of_have_populated_dt())
-		return;
-
-	if (of_machine_is_compatible("ti,omap4-sdp")) {
-		wl12xx.board_ref_clock = WL12XX_REFCLOCK_26;
-		wl12xx.board_tcxo_clock = WL12XX_TCXOCLOCK_26;
-		wl12xx.irq = gpio_to_irq(53);
-	} else if (of_machine_is_compatible("ti,omap4-panda")) {
-		wl12xx.board_ref_clock = WL12XX_REFCLOCK_38;
-		wl12xx.irq = gpio_to_irq(53);
-	} else {
-		return;
-	}
-
-	ret = wl12xx_set_platform_data(&wl12xx);
-	if (ret) {
-		pr_err("error setting wl12xx data: %d\n", ret);
-		return;
-	}
+	return platform_device_register(&omap_vout_device);
 }
 #else
-static inline void omap_init_wl12xx_of(void)
-{
-}
+int __init omap_init_vout(void) { return 0; }
 #endif
 
 /*-------------------------------------------------------------------------*/
@@ -565,18 +493,12 @@ static int __init omap2_init_devices(void)
 	omap_init_mbox();
 	/* If dtb is there, the devices will be created dynamically */
 	if (!of_have_populated_dt()) {
-		omap_init_dmic();
-		omap_init_mcpdm();
 		omap_init_mcspi();
 		omap_init_sham();
 		omap_init_aes();
-	} else {
-		/* These can be removed when bindings are done */
-		omap_init_wl12xx_of();
+		omap_init_rng();
 	}
 	omap_init_sti();
-	omap_init_rng();
-	omap_init_vout();
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index ff37be1..a4e536b 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -400,7 +400,7 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
 
 	/* Create devices for DPI and SDI */
 
-	pdev = create_simple_dss_pdev("omapdss_dpi", -1,
+	pdev = create_simple_dss_pdev("omapdss_dpi", 0,
 			board_data, sizeof(*board_data), dss_pdev);
 	if (IS_ERR(pdev)) {
 		pr_err("Could not build platform_device for omapdss_dpi\n");
@@ -408,7 +408,7 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
 	}
 
 	if (cpu_is_omap34xx()) {
-		pdev = create_simple_dss_pdev("omapdss_sdi", -1,
+		pdev = create_simple_dss_pdev("omapdss_sdi", 0,
 				board_data, sizeof(*board_data), dss_pdev);
 		if (IS_ERR(pdev)) {
 			pr_err("Could not build platform_device for omapdss_sdi\n");
@@ -416,6 +416,34 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
 		}
 	}
 
+	/* create DRM device */
+	r = omap_init_drm();
+	if (r < 0) {
+		pr_err("Unable to register omapdrm device\n");
+		return r;
+	}
+
+	/* create vrfb device */
+	r = omap_init_vrfb();
+	if (r < 0) {
+		pr_err("Unable to register omapvrfb device\n");
+		return r;
+	}
+
+	/* create FB device */
+	r = omap_init_fb();
+	if (r < 0) {
+		pr_err("Unable to register omapfb device\n");
+		return r;
+	}
+
+	/* create V4L2 display device */
+	r = omap_init_vout();
+	if (r < 0) {
+		pr_err("Unable to register omap_vout device\n");
+		return r;
+	}
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/display.h b/arch/arm/mach-omap2/display.h
index b871b017..f3d2ce4 100644
--- a/arch/arm/mach-omap2/display.h
+++ b/arch/arm/mach-omap2/display.h
@@ -26,4 +26,8 @@ struct omap_dss_dispc_dev_attr {
 	bool	has_framedonetv_irq;
 };
 
+int omap_init_drm(void);
+int omap_init_vrfb(void);
+int omap_init_fb(void);
+int omap_init_vout(void);
 #endif
diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c
index 59a4af7..facd740 100644
--- a/arch/arm/mach-omap2/drm.c
+++ b/arch/arm/mach-omap2/drm.c
@@ -26,10 +26,9 @@
 #include <linux/platform_data/omap_drm.h>
 
 #include "soc.h"
-#include "omap_device.h"
-#include "omap_hwmod.h"
+#include "display.h"
 
-#if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE)
+#if defined(CONFIG_DRM_OMAP) || defined(CONFIG_DRM_OMAP_MODULE)
 
 static struct omap_drm_platform_data platform_data;
 
@@ -42,26 +41,13 @@ static struct platform_device omap_drm_device = {
 	.id = 0,
 };
 
-static int __init omap_init_drm(void)
+int __init omap_init_drm(void)
 {
-	struct omap_hwmod *oh = NULL;
-	struct platform_device *pdev;
-
-	/* lookup and populate the DMM information, if present - OMAP4+ */
-	oh = omap_hwmod_lookup("dmm");
-
-	if (oh) {
-		pdev = omap_device_build(oh->name, -1, oh, NULL, 0);
-		WARN(IS_ERR(pdev), "Could not build omap_device for %s\n",
-			oh->name);
-	}
-
 	platform_data.omaprev = GET_OMAP_TYPE;
 
 	return platform_device_register(&omap_drm_device);
 
 }
-
-omap_arch_initcall(omap_init_drm);
-
+#else
+int __init omap_init_drm(void) { return 0; }
 #endif
diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c
index 043e570..365bfd3 100644
--- a/arch/arm/mach-omap2/dss-common.c
+++ b/arch/arm/mach-omap2/dss-common.c
@@ -25,6 +25,7 @@
 
 #include <linux/kernel.h>
 #include <linux/gpio.h>
+#include <linux/platform_device.h>
 
 #include <video/omapdss.h>
 #include <video/omap-panel-data.h>
@@ -37,70 +38,76 @@
 #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
 #define HDMI_GPIO_HPD  63 /* Hotplug detect */
 
-/* Display DVI */
 #define PANDA_DVI_TFP410_POWER_DOWN_GPIO	0
 
-/* Using generic display panel */
-static struct tfp410_platform_data omap4_dvi_panel = {
-	.i2c_bus_num		= 2,
-	.power_down_gpio	= PANDA_DVI_TFP410_POWER_DOWN_GPIO,
+/* DVI Connector */
+static struct connector_dvi_platform_data omap4_panda_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = 2,
 };
 
-static struct omap_dss_device omap4_panda_dvi_device = {
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.name			= "dvi",
-	.driver_name		= "tfp410",
-	.data			= &omap4_dvi_panel,
-	.phy.dpi.data_lines	= 24,
-	.channel		= OMAP_DSS_CHANNEL_LCD2,
+static struct platform_device omap4_panda_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &omap4_panda_dvi_connector_pdata,
 };
 
-static struct omap_dss_hdmi_data omap4_panda_hdmi_data = {
+/* TFP410 DPI-to-DVI chip */
+static struct encoder_tfp410_platform_data omap4_panda_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
+};
+
+static struct platform_device omap4_panda_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &omap4_panda_tfp410_pdata,
+};
+
+/* HDMI Connector */
+static struct connector_hdmi_platform_data omap4_panda_hdmi_connector_pdata = {
+	.name                   = "hdmi",
+	.source                 = "tpd12s015.0",
+};
+
+static struct platform_device omap4_panda_hdmi_connector_device = {
+	.name                   = "connector-hdmi",
+	.id                     = 0,
+	.dev.platform_data      = &omap4_panda_hdmi_connector_pdata,
+};
+
+/* TPD12S015 HDMI ESD protection & level shifter chip */
+static struct encoder_tpd12s015_platform_data omap4_panda_tpd_pdata = {
+	.name                   = "tpd12s015.0",
+	.source                 = "hdmi.0",
+
 	.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
 	.ls_oe_gpio = HDMI_GPIO_LS_OE,
 	.hpd_gpio = HDMI_GPIO_HPD,
 };
 
-static struct omap_dss_device  omap4_panda_hdmi_device = {
-	.name = "hdmi",
-	.driver_name = "hdmi_panel",
-	.type = OMAP_DISPLAY_TYPE_HDMI,
-	.channel = OMAP_DSS_CHANNEL_DIGIT,
-	.data = &omap4_panda_hdmi_data,
-};
-
-static struct omap_dss_device *omap4_panda_dss_devices[] = {
-	&omap4_panda_dvi_device,
-	&omap4_panda_hdmi_device,
+static struct platform_device omap4_panda_tpd_device = {
+	.name                   = "tpd12s015",
+	.id                     = 0,
+	.dev.platform_data      = &omap4_panda_tpd_pdata,
 };
 
 static struct omap_dss_board_info omap4_panda_dss_data = {
-	.num_devices	= ARRAY_SIZE(omap4_panda_dss_devices),
-	.devices	= omap4_panda_dss_devices,
-	.default_device	= &omap4_panda_dvi_device,
+	.default_display_name = "dvi",
 };
 
-void __init omap4_panda_display_init(void)
+void __init omap4_panda_display_init_of(void)
 {
 	omap_display_init(&omap4_panda_dss_data);
 
-	/*
-	 * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
-	 * later have external pull up on the HDMI I2C lines
-	 */
-	if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
-		omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
-	else
-		omap_hdmi_init(0);
-
-	omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
-}
+	platform_device_register(&omap4_panda_tfp410_device);
+	platform_device_register(&omap4_panda_dvi_connector_device);
 
-void __init omap4_panda_display_init_of(void)
-{
-	omap_display_init(&omap4_panda_dss_data);
+	platform_device_register(&omap4_panda_tpd_device);
+	platform_device_register(&omap4_panda_hdmi_connector_device);
 }
 
 
@@ -109,93 +116,73 @@ void __init omap4_panda_display_init_of(void)
 #define DISPLAY_SEL_GPIO	59	/* LCD2/PicoDLP switch */
 #define DLP_POWER_ON_GPIO	40
 
-static struct nokia_dsi_panel_data dsi1_panel = {
-		.name		= "taal",
-		.reset_gpio	= 102,
-		.use_ext_te	= false,
-		.ext_te_gpio	= 101,
-		.esd_interval	= 0,
-		.pin_config = {
-			.num_pins	= 6,
-			.pins		= { 0, 1, 2, 3, 4, 5 },
-		},
-};
-
-static struct omap_dss_device sdp4430_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "taal",
-	.type			= OMAP_DISPLAY_TYPE_DSI,
-	.data			= &dsi1_panel,
-	.phy.dsi		= {
-		.module		= 0,
+static struct panel_dsicm_platform_data dsi1_panel = {
+	.name		= "lcd",
+	.source		= "dsi.0",
+	.reset_gpio	= 102,
+	.use_ext_te	= false,
+	.ext_te_gpio	= 101,
+	.pin_config = {
+		.num_pins	= 6,
+		.pins		= { 0, 1, 2, 3, 4, 5 },
 	},
-	.channel		= OMAP_DSS_CHANNEL_LCD,
 };
 
-static struct nokia_dsi_panel_data dsi2_panel = {
-		.name		= "taal",
-		.reset_gpio	= 104,
-		.use_ext_te	= false,
-		.ext_te_gpio	= 103,
-		.esd_interval	= 0,
-		.pin_config = {
-			.num_pins	= 6,
-			.pins		= { 0, 1, 2, 3, 4, 5 },
-		},
+static struct platform_device sdp4430_lcd_device = {
+	.name                   = "panel-dsi-cm",
+	.id                     = 0,
+	.dev.platform_data	= &dsi1_panel,
 };
 
-static struct omap_dss_device sdp4430_lcd2_device = {
-	.name			= "lcd2",
-	.driver_name		= "taal",
-	.type			= OMAP_DISPLAY_TYPE_DSI,
-	.data			= &dsi2_panel,
-	.phy.dsi		= {
-
-		.module		= 1,
+static struct panel_dsicm_platform_data dsi2_panel = {
+	.name		= "lcd2",
+	.source		= "dsi.1",
+	.reset_gpio	= 104,
+	.use_ext_te	= false,
+	.ext_te_gpio	= 103,
+	.pin_config = {
+		.num_pins	= 6,
+		.pins		= { 0, 1, 2, 3, 4, 5 },
 	},
-	.channel		= OMAP_DSS_CHANNEL_LCD2,
 };
 
-static struct omap_dss_hdmi_data sdp4430_hdmi_data = {
-	.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
-	.ls_oe_gpio = HDMI_GPIO_LS_OE,
-	.hpd_gpio = HDMI_GPIO_HPD,
+static struct platform_device sdp4430_lcd2_device = {
+	.name                   = "panel-dsi-cm",
+	.id                     = 1,
+	.dev.platform_data	= &dsi2_panel,
 };
 
-static struct omap_dss_device sdp4430_hdmi_device = {
-	.name = "hdmi",
-	.driver_name = "hdmi_panel",
-	.type = OMAP_DISPLAY_TYPE_HDMI,
-	.channel = OMAP_DSS_CHANNEL_DIGIT,
-	.data = &sdp4430_hdmi_data,
+/* HDMI Connector */
+static struct connector_hdmi_platform_data sdp4430_hdmi_connector_pdata = {
+	.name                   = "hdmi",
+	.source                 = "tpd12s015.0",
 };
 
-static struct picodlp_panel_data sdp4430_picodlp_pdata = {
-	.picodlp_adapter_id	= 2,
-	.emu_done_gpio		= 44,
-	.pwrgood_gpio		= 45,
+static struct platform_device sdp4430_hdmi_connector_device = {
+	.name                   = "connector-hdmi",
+	.id                     = 0,
+	.dev.platform_data      = &sdp4430_hdmi_connector_pdata,
 };
 
-static struct omap_dss_device sdp4430_picodlp_device = {
-	.name			= "picodlp",
-	.driver_name		= "picodlp_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 24,
-	.channel		= OMAP_DSS_CHANNEL_LCD2,
-	.data			= &sdp4430_picodlp_pdata,
+/* TPD12S015 HDMI ESD protection & level shifter chip */
+static struct encoder_tpd12s015_platform_data sdp4430_tpd_pdata = {
+	.name                   = "tpd12s015.0",
+	.source                 = "hdmi.0",
+
+	.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
+	.ls_oe_gpio = HDMI_GPIO_LS_OE,
+	.hpd_gpio = HDMI_GPIO_HPD,
 };
 
-static struct omap_dss_device *sdp4430_dss_devices[] = {
-	&sdp4430_lcd_device,
-	&sdp4430_lcd2_device,
-	&sdp4430_hdmi_device,
-	&sdp4430_picodlp_device,
+static struct platform_device sdp4430_tpd_device = {
+	.name                   = "tpd12s015",
+	.id                     = 0,
+	.dev.platform_data      = &sdp4430_tpd_pdata,
 };
 
+
 static struct omap_dss_board_info sdp4430_dss_data = {
-	.num_devices	= ARRAY_SIZE(sdp4430_dss_devices),
-	.devices	= sdp4430_dss_devices,
-	.default_device	= &sdp4430_lcd_device,
+	.default_display_name = "lcd",
 };
 
 /*
@@ -204,7 +191,7 @@ static struct omap_dss_board_info sdp4430_dss_data = {
  * used by picodlp on the 4430sdp platform. Keep this gpio disabled as LCD2 is
  * selected by default
  */
-void __init omap_4430sdp_display_init(void)
+void __init omap_4430sdp_display_init_of(void)
 {
 	int r;
 
@@ -219,33 +206,54 @@ void __init omap_4430sdp_display_init(void)
 		pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__);
 
 	omap_display_init(&sdp4430_dss_data);
-	/*
-	 * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
-	 * later have external pull up on the HDMI I2C lines
-	 */
-	if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
-		omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
-	else
-		omap_hdmi_init(0);
-
-	omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
+
+	platform_device_register(&sdp4430_lcd_device);
+	platform_device_register(&sdp4430_lcd2_device);
+
+	platform_device_register(&sdp4430_tpd_device);
+	platform_device_register(&sdp4430_hdmi_connector_device);
 }
 
-void __init omap_4430sdp_display_init_of(void)
-{
-	int r;
 
-	r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
-			"display_sel");
-	if (r)
-		pr_err("%s: Could not get display_sel GPIO\n", __func__);
+/* OMAP3 IGEPv2 data */
 
-	r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
-		"DLP POWER ON");
-	if (r)
-		pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__);
+#define IGEP2_DVI_TFP410_POWER_DOWN_GPIO	170
 
-	omap_display_init(&sdp4430_dss_data);
+/* DVI Connector */
+static struct connector_dvi_platform_data omap3_igep2_dvi_connector_pdata = {
+	.name                   = "dvi",
+	.source                 = "tfp410.0",
+	.i2c_bus_num            = 3,
+};
+
+static struct platform_device omap3_igep2_dvi_connector_device = {
+	.name                   = "connector-dvi",
+	.id                     = 0,
+	.dev.platform_data      = &omap3_igep2_dvi_connector_pdata,
+};
+
+/* TFP410 DPI-to-DVI chip */
+static struct encoder_tfp410_platform_data omap3_igep2_tfp410_pdata = {
+	.name                   = "tfp410.0",
+	.source                 = "dpi.0",
+	.data_lines             = 24,
+	.power_down_gpio        = IGEP2_DVI_TFP410_POWER_DOWN_GPIO,
+};
+
+static struct platform_device omap3_igep2_tfp410_device = {
+	.name                   = "tfp410",
+	.id                     = 0,
+	.dev.platform_data      = &omap3_igep2_tfp410_pdata,
+};
+
+static struct omap_dss_board_info igep2_dss_data = {
+	.default_display_name = "dvi",
+};
+
+void __init omap3_igep2_display_init_of(void)
+{
+	omap_display_init(&igep2_dss_data);
+
+	platform_device_register(&omap3_igep2_tfp410_device);
+	platform_device_register(&omap3_igep2_dvi_connector_device);
 }
diff --git a/arch/arm/mach-omap2/dss-common.h b/arch/arm/mach-omap2/dss-common.h
index 915f6ff..a9becf0 100644
--- a/arch/arm/mach-omap2/dss-common.h
+++ b/arch/arm/mach-omap2/dss-common.h
@@ -6,9 +6,8 @@
  * This file will be removed when DSS supports DT.
  */
 
-void __init omap4_panda_display_init(void);
 void __init omap4_panda_display_init_of(void);
-void __init omap_4430sdp_display_init(void);
 void __init omap_4430sdp_display_init_of(void);
+void __init omap3_igep2_display_init_of(void);
 
 #endif
diff --git a/arch/arm/mach-omap2/fb.c b/arch/arm/mach-omap2/fb.c
index 2ca33cc..26e28e9 100644
--- a/arch/arm/mach-omap2/fb.c
+++ b/arch/arm/mach-omap2/fb.c
@@ -32,6 +32,7 @@
 #include <asm/mach/map.h>
 
 #include "soc.h"
+#include "display.h"
 
 #ifdef CONFIG_OMAP2_VRFB
 
@@ -64,7 +65,7 @@ static const struct resource omap3_vrfb_resources[] = {
 	DEFINE_RES_MEM_NAMED(0xfc000000u, 0x4000000, "vrfb-area-11"),
 };
 
-static int __init omap_init_vrfb(void)
+int __init omap_init_vrfb(void)
 {
 	struct platform_device *pdev;
 	const struct resource *res;
@@ -85,8 +86,8 @@ static int __init omap_init_vrfb(void)
 
 	return PTR_RET(pdev);
 }
-
-omap_arch_initcall(omap_init_vrfb);
+#else
+int __init omap_init_vrfb(void) { return 0; }
 #endif
 
 #if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
@@ -105,11 +106,10 @@ static struct platform_device omap_fb_device = {
 	.num_resources = 0,
 };
 
-static int __init omap_init_fb(void)
+int __init omap_init_fb(void)
 {
 	return platform_device_register(&omap_fb_device);
 }
-
-omap_arch_initcall(omap_init_fb);
-
+#else
+int __init omap_init_fb(void) { return 0; }
 #endif
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 64b5a83..8b6876c 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -272,9 +272,19 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base)
 	struct gpmc_timings t;
 	int ret;
 
-	if (gpmc_onenand_data->of_node)
+	if (gpmc_onenand_data->of_node) {
 		gpmc_read_settings_dt(gpmc_onenand_data->of_node,
 				      &onenand_async);
+		if (onenand_async.sync_read || onenand_async.sync_write) {
+			if (onenand_async.sync_write)
+				gpmc_onenand_data->flags |=
+					ONENAND_SYNC_READWRITE;
+			else
+				gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
+			onenand_async.sync_read = false;
+			onenand_async.sync_write = false;
+		}
+	}
 
 	omap2_onenand_set_async_mode(onenand_base);
 
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index f3fdd6a..51525fa 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -149,7 +149,7 @@ struct omap3_gpmc_regs {
 
 static struct gpmc_client_irq gpmc_client_irq[GPMC_NR_IRQ];
 static struct irq_chip gpmc_irq_chip;
-static unsigned gpmc_irq_start;
+static int gpmc_irq_start;
 
 static struct resource	gpmc_mem_root;
 static struct resource	gpmc_cs_mem[GPMC_CS_NUM];
@@ -1491,8 +1491,8 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
 	 */
 	ret = gpmc_cs_remap(cs, res.start);
 	if (ret < 0) {
-		dev_err(&pdev->dev, "cannot remap GPMC CS %d to 0x%x\n",
-			cs, res.start);
+		dev_err(&pdev->dev, "cannot remap GPMC CS %d to %pa\n",
+			cs, &res.start);
 		goto err;
 	}
 
@@ -1521,6 +1521,42 @@ err:
 	return ret;
 }
 
+/*
+ * REVISIT: Add timing support from slls644g.pdf
+ */
+static int gpmc_probe_8250(struct platform_device *pdev,
+				struct device_node *child)
+{
+	struct resource res;
+	unsigned long base;
+	int ret, cs;
+
+	if (of_property_read_u32(child, "reg", &cs) < 0) {
+		dev_err(&pdev->dev, "%s has no 'reg' property\n",
+			child->full_name);
+		return -ENODEV;
+	}
+
+	if (of_address_to_resource(child, 0, &res) < 0) {
+		dev_err(&pdev->dev, "%s has malformed 'reg' property\n",
+			child->full_name);
+		return -ENODEV;
+	}
+
+	ret = gpmc_cs_request(cs, resource_size(&res), &base);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs);
+		return ret;
+	}
+
+	if (of_platform_device_create(child, NULL, &pdev->dev))
+		return 0;
+
+	dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name);
+
+	return -ENODEV;
+}
+
 static int gpmc_probe_dt(struct platform_device *pdev)
 {
 	int ret;
@@ -1564,6 +1600,8 @@ static int gpmc_probe_dt(struct platform_device *pdev)
 		else if (of_node_cmp(child->name, "ethernet") == 0 ||
 			 of_node_cmp(child->name, "nor") == 0)
 			ret = gpmc_probe_generic_child(pdev, child);
+		else if (of_node_cmp(child->name, "8250") == 0)
+			ret = gpmc_probe_8250(pdev, child);
 
 		if (WARN(ret < 0, "%s: probing gpmc child %s failed\n",
 			 __func__, child->full_name))
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index d940e53..b456b44 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -181,7 +181,7 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata,
 				 sizeof(struct omap_i2c_bus_platform_data));
 	WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
 
-	return PTR_RET(pdev);
+	return PTR_ERR_OR_ZERO(pdev);
 }
 
 static  int __init omap_i2c_cmdline(void)
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 2dc62a2..9428c5f 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -18,6 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/random.h>
 #include <linux/slab.h>
 
 #ifdef CONFIG_SOC_BUS
@@ -61,7 +62,7 @@ int omap_type(void)
 		val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
 	} else if (cpu_is_omap44xx()) {
 		val = omap_ctrl_readl(OMAP4_CTRL_MODULE_CORE_STATUS);
-	} else if (soc_is_omap54xx()) {
+	} else if (soc_is_omap54xx() || soc_is_dra7xx()) {
 		val = omap_ctrl_readl(OMAP5XXX_CONTROL_STATUS);
 		val &= OMAP5_DEVICETYPE_MASK;
 		val >>= 6;
@@ -116,7 +117,7 @@ static u16 tap_prod_id;
 
 void omap_get_die_id(struct omap_die_id *odi)
 {
-	if (cpu_is_omap44xx() || soc_is_omap54xx()) {
+	if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) {
 		odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_0);
 		odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_1);
 		odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_2);
@@ -130,6 +131,17 @@ void omap_get_die_id(struct omap_die_id *odi)
 	odi->id_3 = read_tap_reg(OMAP_TAP_DIE_ID_3);
 }
 
+static int __init omap_feed_randpool(void)
+{
+	struct omap_die_id odi;
+
+	/* Throw the die ID into the entropy pool at boot */
+	omap_get_die_id(&odi);
+	add_device_randomness(&odi, sizeof(odi));
+	return 0;
+}
+omap_device_initcall(omap_feed_randpool);
+
 void __init omap2xxx_check_revision(void)
 {
 	int i, j;
@@ -576,8 +588,8 @@ void __init omap5xxx_check_revision(void)
 	case 0xb942:
 		switch (rev) {
 		case 0:
-			omap_revision = OMAP5430_REV_ES1_0;
-			break;
+			/* No support for ES1.0 Test chip */
+			BUG();
 		case 1:
 		default:
 			omap_revision = OMAP5430_REV_ES2_0;
@@ -587,8 +599,8 @@ void __init omap5xxx_check_revision(void)
 	case 0xb998:
 		switch (rev) {
 		case 0:
-			omap_revision = OMAP5432_REV_ES1_0;
-			break;
+			/* No support for ES1.0 Test chip */
+			BUG();
 		case 1:
 		default:
 			omap_revision = OMAP5432_REV_ES2_0;
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 4a3f06f..cd22262 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -251,7 +251,7 @@ static struct map_desc omap44xx_io_desc[] __initdata = {
 };
 #endif
 
-#ifdef	CONFIG_SOC_OMAP5
+#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)
 static struct map_desc omap54xx_io_desc[] __initdata = {
 	{
 		.virtual	= L3_54XX_VIRT,
@@ -333,7 +333,7 @@ void __init omap4_map_io(void)
 }
 #endif
 
-#ifdef CONFIG_SOC_OMAP5
+#if defined(CONFIG_SOC_OMAP5) ||  defined(CONFIG_SOC_DRA7XX)
 void __init omap5_map_io(void)
 {
 	iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc));
@@ -583,6 +583,11 @@ void __init am33xx_init_early(void)
 	omap_hwmod_init_postsetup();
 	omap_clk_init = am33xx_clk_init;
 }
+
+void __init am33xx_init_late(void)
+{
+	omap_common_late_init();
+}
 #endif
 
 #ifdef CONFIG_SOC_AM43XX
@@ -594,7 +599,18 @@ void __init am43xx_init_early(void)
 				  NULL);
 	omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE));
 	omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE), NULL);
+	omap_prm_base_init();
+	omap_cm_base_init();
 	omap3xxx_check_revision();
+	am43xx_powerdomains_init();
+	am43xx_clockdomains_init();
+	am43xx_hwmod_init();
+	omap_hwmod_init_postsetup();
+}
+
+void __init am43xx_init_late(void)
+{
+	omap_common_late_init();
 }
 #endif
 
@@ -651,8 +667,39 @@ void __init omap5_init_early(void)
 	omap54xx_hwmod_init();
 	omap_hwmod_init_postsetup();
 }
+
+void __init omap5_init_late(void)
+{
+	omap_common_late_init();
+}
 #endif
 
+#ifdef CONFIG_SOC_DRA7XX
+void __init dra7xx_init_early(void)
+{
+	omap2_set_globals_tap(-1, OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE));
+	omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
+				  OMAP2_L4_IO_ADDRESS(DRA7XX_CTRL_BASE));
+	omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE));
+	omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(DRA7XX_CM_CORE_AON_BASE),
+			     OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE));
+	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
+	omap_prm_base_init();
+	omap_cm_base_init();
+	omap44xx_prm_init();
+	dra7xx_powerdomains_init();
+	dra7xx_clockdomains_init();
+	dra7xx_hwmod_init();
+	omap_hwmod_init_postsetup();
+}
+
+void __init dra7xx_init_late(void)
+{
+	omap_common_late_init();
+}
+#endif
+
+
 void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 				      struct omap_sdrc_params *sdrc_cs1)
 {
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 3926f37..e022a86 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -233,7 +233,7 @@ static inline void omap_intc_handle_irq(void __iomem *base_addr, struct pt_regs
 			goto out;
 
 		irqnr = readl_relaxed(base_addr + 0xd8);
-#ifdef CONFIG_SOC_TI81XX
+#if IS_ENABLED(CONFIG_SOC_TI81XX) || IS_ENABLED(CONFIG_SOC_AM33XX)
 		if (irqnr)
 			goto out;
 		irqnr = readl_relaxed(base_addr + 0xf8);
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 5d87680..b4ac3af 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -25,6 +25,7 @@
 
 #include "soc.h"
 #include "omap_device.h"
+#include "clock.h"
 
 /*
  * FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle.
@@ -33,22 +34,18 @@
 #include "cm3xxx.h"
 #include "cm-regbits-34xx.h"
 
+static struct clk *mcbsp_iclks[5];
+
 static int omap3_enable_st_clock(unsigned int id, bool enable)
 {
-	unsigned int w;
-
 	/*
 	 * Sidetone uses McBSP ICLK - which must not idle when sidetones
 	 * are enabled or sidetones start sounding ugly.
 	 */
-	w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
 	if (enable)
-		w &= ~(1 << (id - 2));
+		return omap2_clk_deny_idle(mcbsp_iclks[id]);
 	else
-		w |= 1 << (id - 2);
-	omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
-
-	return 0;
+		return omap2_clk_allow_idle(mcbsp_iclks[id]);
 }
 
 static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
@@ -58,6 +55,7 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 	struct omap_hwmod *oh_device[2];
 	struct omap_mcbsp_platform_data *pdata = NULL;
 	struct platform_device *pdev;
+	char clk_name[11];
 
 	sscanf(oh->name, "mcbsp%d", &id);
 
@@ -99,6 +97,8 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 		oh_device[1] = omap_hwmod_lookup((
 		(struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone);
 		pdata->enable_st_clock = omap3_enable_st_clock;
+		sprintf(clk_name, "mcbsp%d_ick", id);
+		mcbsp_iclks[id] = clk_get(NULL, clk_name);
 		count++;
 	}
 	pdev = omap_device_build_ss(name, id, oh_device, count, pdata,
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index f82cf87..48094b5 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -811,6 +811,12 @@ int __init omap_mux_late_init(void)
 		}
 	}
 
+	omap_mux_dbg_init();
+
+	/* see pinctrl-single-omap for the wake-up interrupt handling */
+	if (of_have_populated_dt())
+		return 0;
+
 	ret = request_irq(omap_prcm_event_to_irq("io"),
 		omap_hwmod_mux_handle_irq, IRQF_SHARED | IRQF_NO_SUSPEND,
 			"hwmod_io", omap_mux_late_init);
@@ -818,8 +824,6 @@ int __init omap_mux_late_init(void)
 	if (ret)
 		pr_warning("mux: Failed to setup hwmod io irq %d\n", ret);
 
-	omap_mux_dbg_init();
-
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index 5d2080e..16f78a9 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -28,7 +28,7 @@
 #define OMAP_PULL_UP			(1 << 4)
 #define OMAP_ALTELECTRICALSEL		(1 << 5)
 
-/* 34xx specific mux bit defines */
+/* omap3/4/5 specific mux bit defines */
 #define OMAP_INPUT_EN			(1 << 8)
 #define OMAP_OFF_EN			(1 << 9)
 #define OMAP_OFFOUT_EN			(1 << 10)
@@ -36,8 +36,6 @@
 #define OMAP_OFF_PULL_EN		(1 << 12)
 #define OMAP_OFF_PULL_UP		(1 << 13)
 #define OMAP_WAKEUP_EN			(1 << 14)
-
-/* 44xx specific mux bit defines */
 #define OMAP_WAKEUP_EVENT		(1 << 15)
 
 /* Active pin states */
diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c
index c53609f4..be271f1 100644
--- a/arch/arm/mach-omap2/mux34xx.c
+++ b/arch/arm/mach-omap2/mux34xx.c
@@ -620,7 +620,7 @@ static struct omap_mux __initdata omap3_muxmodes[] = {
 		"uart1_rts", "ssi1_flag_tx", NULL, NULL,
 		"gpio_149", NULL, NULL, "safe_mode"),
 	_OMAP3_MUXENTRY(UART1_RX, 151,
-		"uart1_rx", "ss1_wake_tx", "mcbsp1_clkr", "mcspi4_clk",
+		"uart1_rx", "ssi1_wake_tx", "mcbsp1_clkr", "mcspi4_clk",
 		"gpio_151", NULL, NULL, "safe_mode"),
 	_OMAP3_MUXENTRY(UART1_TX, 148,
 		"uart1_tx", "ssi1_dat_tx", NULL, NULL,
diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c
index b970440..5ac122e 100644
--- a/arch/arm/mach-omap2/omap-secure.c
+++ b/arch/arm/mach-omap2/omap-secure.c
@@ -3,6 +3,8 @@
  *
  * Copyright (C) 2011 Texas Instruments, Inc.
  *	Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg>
+ * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com>
  *
  *
  * This program is free software,you can redistribute it and/or modify
@@ -70,3 +72,77 @@ phys_addr_t omap_secure_ram_mempool_base(void)
 {
 	return omap_secure_memblock_base;
 }
+
+/**
+ * rx51_secure_dispatcher: Routine to dispatch secure PPA API calls
+ * @idx: The PPA API index
+ * @process: Process ID
+ * @flag: The flag indicating criticality of operation
+ * @nargs: Number of valid arguments out of four.
+ * @arg1, arg2, arg3 args4: Parameters passed to secure API
+ *
+ * Return the non-zero error value on failure.
+ *
+ * NOTE: rx51_secure_dispatcher differs from omap_secure_dispatcher because
+ *       it calling omap_smc3() instead omap_smc2() and param[0] is nargs+1
+ */
+u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs,
+			   u32 arg1, u32 arg2, u32 arg3, u32 arg4)
+{
+	u32 ret;
+	u32 param[5];
+
+	param[0] = nargs+1; /* RX-51 needs number of arguments + 1 */
+	param[1] = arg1;
+	param[2] = arg2;
+	param[3] = arg3;
+	param[4] = arg4;
+
+	/*
+	 * Secure API needs physical address
+	 * pointer for the parameters
+	 */
+	local_irq_disable();
+	local_fiq_disable();
+	flush_cache_all();
+	outer_clean_range(__pa(param), __pa(param + 5));
+	ret = omap_smc3(idx, process, flag, __pa(param));
+	flush_cache_all();
+	local_fiq_enable();
+	local_irq_enable();
+
+	return ret;
+}
+
+/**
+ * rx51_secure_update_aux_cr: Routine to modify the contents of Auxiliary Control Register
+ *  @set_bits: bits to set in ACR
+ *  @clr_bits: bits to clear in ACR
+ *
+ * Return the non-zero error value on failure.
+*/
+u32 rx51_secure_update_aux_cr(u32 set_bits, u32 clear_bits)
+{
+	u32 acr;
+
+	/* Read ACR */
+	asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
+	acr &= ~clear_bits;
+	acr |= set_bits;
+
+	return rx51_secure_dispatcher(RX51_PPA_WRITE_ACR,
+				      0,
+				      FLAG_START_CRITICAL,
+				      1, acr, 0, 0, 0);
+}
+
+/**
+ * rx51_secure_rng_call: Routine for HW random generator
+ */
+u32 rx51_secure_rng_call(u32 ptr, u32 count, u32 flag)
+{
+	return rx51_secure_dispatcher(RX51_PPA_HWRNG,
+				      0,
+				      NO_FLAG,
+				      3, ptr, count, flag, 0);
+}
diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
index 0e72917..8cc7d33 100644
--- a/arch/arm/mach-omap2/omap-secure.h
+++ b/arch/arm/mach-omap2/omap-secure.h
@@ -3,6 +3,8 @@
  *
  * Copyright (C) 2011 Texas Instruments, Inc.
  *	Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg>
+ * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -42,23 +44,38 @@
 #define OMAP4_MON_L2X0_AUXCTRL_INDEX	0x109
 #define OMAP4_MON_L2X0_PREFETCH_INDEX	0x113
 
+#define OMAP5_DRA7_MON_SET_CNTFRQ_INDEX	0x109
+
 /* Secure PPA(Primary Protected Application) APIs */
 #define OMAP4_PPA_L2_POR_INDEX		0x23
 #define OMAP4_PPA_CPU_ACTRL_SMP_INDEX	0x25
 
+/* Secure RX-51 PPA (Primary Protected Application) APIs */
+#define RX51_PPA_HWRNG			29
+#define RX51_PPA_L2_INVAL		40
+#define RX51_PPA_WRITE_ACR		42
+
 #ifndef __ASSEMBLER__
 
 extern u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs,
 				u32 arg1, u32 arg2, u32 arg3, u32 arg4);
 extern u32 omap_smc2(u32 id, u32 falg, u32 pargs);
+extern u32 omap_smc3(u32 id, u32 process, u32 flag, u32 pargs);
 extern phys_addr_t omap_secure_ram_mempool_base(void);
 extern int omap_secure_ram_reserve_memblock(void);
 
+extern u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs,
+				  u32 arg1, u32 arg2, u32 arg3, u32 arg4);
+extern u32 rx51_secure_update_aux_cr(u32 set_bits, u32 clear_bits);
+extern u32 rx51_secure_rng_call(u32 ptr, u32 count, u32 flag);
+
 #ifdef CONFIG_OMAP4_ERRATA_I688
 extern int omap_barrier_reserve_memblock(void);
 #else
 static inline void omap_barrier_reserve_memblock(void)
 { }
 #endif
+
+void set_cntfreq(void);
 #endif /* __ASSEMBLER__ */
 #endif /* OMAP_ARCH_OMAP_SECURE_H */
diff --git a/arch/arm/mach-omap2/omap-smc.S b/arch/arm/mach-omap2/omap-smc.S
index f6441c1..fd90125 100644
--- a/arch/arm/mach-omap2/omap-smc.S
+++ b/arch/arm/mach-omap2/omap-smc.S
@@ -1,9 +1,11 @@
 /*
- * OMAP44xx secure APIs file.
+ * OMAP34xx and OMAP44xx secure APIs file.
  *
  * Copyright (C) 2010 Texas Instruments, Inc.
  * Written by Santosh Shilimkar <santosh.shilimkar@ti.com>
  *
+ * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg>
+ * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com>
  *
  * This program is free software,you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -54,6 +56,23 @@ ENTRY(omap_smc2)
 	ldmfd   sp!, {r4-r12, pc}
 ENDPROC(omap_smc2)
 
+/**
+ * u32 omap_smc3(u32 service_id, u32 process_id, u32 flag, u32 pargs)
+ * Low level common routine for secure HAL and PPA APIs via smc #1
+ * r0 - @service_id: Secure Service ID
+ * r1 - @process_id: Process ID
+ * r2 - @flag: Flag to indicate the criticality of operation
+ * r3 - @pargs: Physical address of parameter list
+ */
+ENTRY(omap_smc3)
+	stmfd	sp!, {r4-r11, lr}
+	mov	r12, r0		@ Copy the secure service ID
+	mov	r6, #0xff	@ Indicate new Task call
+	dsb			@ Memory Barrier (not sure if needed, copied from omap_smc2)
+	smc	#1		@ Call PPA service
+	ldmfd	sp!, {r4-r11, pc}
+ENDPROC(omap_smc3)
+
 ENTRY(omap_modify_auxcoreboot0)
 	stmfd   sp!, {r1-r12, lr}
 	ldr	r12, =0x104
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 8708b2a..75e95d4 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -1,5 +1,5 @@
 /*
- * OMAP4 SMP source file. It contains platform specific fucntions
+ * OMAP4 SMP source file. It contains platform specific functions
  * needed for the linux smp kernel.
  *
  * Copyright (C) 2009 Texas Instruments, Inc.
@@ -66,6 +66,13 @@ static void omap4_secondary_init(unsigned int cpu)
 							4, 0, 0, 0, 0, 0);
 
 	/*
+	 * Configure the CNTFRQ register for the secondary cpu's which
+	 * indicates the frequency of the cpu local timers.
+	 */
+	if (soc_is_omap54xx() || soc_is_dra7xx())
+		set_cntfreq();
+
+	/*
 	 * Synchronise with the boot thread.
 	 */
 	spin_lock(&boot_lock);
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index 813c615..3664562 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -33,8 +33,12 @@
 #include "omap4-sar-layout.h"
 #include "common.h"
 
-#define MAX_NR_REG_BANKS	5
-#define MAX_IRQS		160
+#define AM43XX_NR_REG_BANKS	7
+#define AM43XX_IRQS		224
+#define MAX_NR_REG_BANKS	AM43XX_NR_REG_BANKS
+#define MAX_IRQS		AM43XX_IRQS
+#define DEFAULT_NR_REG_BANKS	5
+#define DEFAULT_IRQS		160
 #define WKG_MASK_ALL		0x00000000
 #define WKG_UNMASK_ALL		0xffffffff
 #define CPU_ENA_OFFSET		0x400
@@ -47,8 +51,8 @@ static void __iomem *wakeupgen_base;
 static void __iomem *sar_base;
 static DEFINE_RAW_SPINLOCK(wakeupgen_lock);
 static unsigned int irq_target_cpu[MAX_IRQS];
-static unsigned int irq_banks = MAX_NR_REG_BANKS;
-static unsigned int max_irqs = MAX_IRQS;
+static unsigned int irq_banks = DEFAULT_NR_REG_BANKS;
+static unsigned int max_irqs = DEFAULT_IRQS;
 static unsigned int omap_secure_apis;
 
 /*
@@ -418,12 +422,16 @@ int __init omap_wakeupgen_init(void)
 		irq_banks = OMAP4_NR_BANKS;
 		max_irqs = OMAP4_NR_IRQS;
 		omap_secure_apis = 1;
+	} else if (soc_is_am43xx()) {
+		irq_banks = AM43XX_NR_REG_BANKS;
+		max_irqs = AM43XX_IRQS;
 	}
 
 	/* Clear all IRQ bitmasks at wakeupGen level */
 	for (i = 0; i < irq_banks; i++) {
 		wakeupgen_writel(0, i, CPU0_ID);
-		wakeupgen_writel(0, i, CPU1_ID);
+		if (!soc_is_am43xx())
+			wakeupgen_writel(0, i, CPU1_ID);
 	}
 
 	/*
diff --git a/arch/arm/mach-omap2/omap54xx.h b/arch/arm/mach-omap2/omap54xx.h
index a086ba1..2d35c57 100644
--- a/arch/arm/mach-omap2/omap54xx.h
+++ b/arch/arm/mach-omap2/omap54xx.h
@@ -30,4 +30,8 @@
 #define OMAP54XX_CTRL_BASE		0x4a002800
 #define OMAP54XX_SAR_RAM_BASE		0x4ae26000
 
+#define DRA7XX_CM_CORE_AON_BASE		0x4a005000
+#define DRA7XX_CTRL_BASE		0x4a003400
+#define DRA7XX_TAP_BASE			0x4ae0c000
+
 #endif /* __ASM_SOC_OMAP555554XX_H */
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index f99f68e..b69dd9a 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -158,7 +158,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
 	}
 
 	od = omap_device_alloc(pdev, hwmods, oh_cnt);
-	if (!od) {
+	if (IS_ERR(od)) {
 		dev_err(&pdev->dev, "Cannot allocate omap_device for :%s\n",
 			oh_name);
 		ret = PTR_ERR(od);
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 7f4db12..e3f0eca 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1405,7 +1405,9 @@ static void _enable_sysc(struct omap_hwmod *oh)
 	    (sf & SYSC_HAS_CLOCKACTIVITY))
 		_set_clockactivity(oh, oh->class->sysc->clockact, &v);
 
-	_write_sysconfig(v, oh);
+	/* If the cached value is the same as the new value, skip the write */
+	if (oh->_sysc_cache != v)
+		_write_sysconfig(v, oh);
 
 	/*
 	 * Set the autoidle bit only after setting the smartidle bit
@@ -2355,25 +2357,29 @@ static struct device_node *of_dev_hwmod_lookup(struct device_node *np,
 /**
  * _init_mpu_rt_base - populate the virtual address for a hwmod
  * @oh: struct omap_hwmod * to locate the virtual address
+ * @data: (unused, caller should pass NULL)
+ * @np: struct device_node * of the IP block's device node in the DT data
  *
  * Cache the virtual address used by the MPU to access this IP block's
  * registers.  This address is needed early so the OCP registers that
  * are part of the device's address space can be ioremapped properly.
- * No return value.
+ *
+ * Returns 0 on success, -EINVAL if an invalid hwmod is passed, and
+ * -ENXIO on absent or invalid register target address space.
  */
-static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data)
+static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
+				    struct device_node *np)
 {
 	struct omap_hwmod_addr_space *mem;
 	void __iomem *va_start = NULL;
-	struct device_node *np;
 
 	if (!oh)
-		return;
+		return -EINVAL;
 
 	_save_mpu_port_index(oh);
 
 	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
-		return;
+		return -ENXIO;
 
 	mem = _find_mpu_rt_addr_space(oh);
 	if (!mem) {
@@ -2381,25 +2387,24 @@ static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data)
 			 oh->name);
 
 		/* Extract the IO space from device tree blob */
-		if (!of_have_populated_dt())
-			return;
+		if (!np)
+			return -ENXIO;
 
-		np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh);
-		if (np)
-			va_start = of_iomap(np, oh->mpu_rt_idx);
+		va_start = of_iomap(np, oh->mpu_rt_idx);
 	} else {
 		va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
 	}
 
 	if (!va_start) {
 		pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
-		return;
+		return -ENXIO;
 	}
 
 	pr_debug("omap_hwmod: %s: MPU register target at va %p\n",
 		 oh->name, va_start);
 
 	oh->_mpu_rt_va = va_start;
+	return 0;
 }
 
 /**
@@ -2412,18 +2417,28 @@ static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data)
  * registered at this point.  This is the first of two phases for
  * hwmod initialization.  Code called here does not touch any hardware
  * registers, it simply prepares internal data structures.  Returns 0
- * upon success or if the hwmod isn't registered, or -EINVAL upon
- * failure.
+ * upon success or if the hwmod isn't registered or if the hwmod's
+ * address space is not defined, or -EINVAL upon failure.
  */
 static int __init _init(struct omap_hwmod *oh, void *data)
 {
 	int r;
+	struct device_node *np = NULL;
 
 	if (oh->_state != _HWMOD_STATE_REGISTERED)
 		return 0;
 
-	if (oh->class->sysc)
-		_init_mpu_rt_base(oh, NULL);
+	if (of_have_populated_dt())
+		np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh);
+
+	if (oh->class->sysc) {
+		r = _init_mpu_rt_base(oh, NULL, np);
+		if (r < 0) {
+			WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n",
+			     oh->name);
+			return 0;
+		}
+	}
 
 	r = _init_clocks(oh, NULL);
 	if (r < 0) {
@@ -2431,6 +2446,12 @@ static int __init _init(struct omap_hwmod *oh, void *data)
 		return -EINVAL;
 	}
 
+	if (np)
+		if (of_find_property(np, "ti,no-reset-on-init", NULL))
+			oh->flags |= HWMOD_INIT_NO_RESET;
+		if (of_find_property(np, "ti,no-idle-on-init", NULL))
+			oh->flags |= HWMOD_INIT_NO_IDLE;
+
 	oh->_state = _HWMOD_STATE_INITIALIZED;
 
 	return 0;
@@ -4113,7 +4134,7 @@ void __init omap_hwmod_init(void)
 		soc_ops.assert_hardreset = _omap2_assert_hardreset;
 		soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
 		soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
-	} else if (cpu_is_omap44xx() || soc_is_omap54xx()) {
+	} else if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) {
 		soc_ops.enable_module = _omap4_enable_module;
 		soc_ops.disable_module = _omap4_disable_module;
 		soc_ops.wait_target_ready = _omap4_wait_target_ready;
@@ -4123,6 +4144,14 @@ void __init omap_hwmod_init(void)
 		soc_ops.init_clkdm = _init_clkdm;
 		soc_ops.update_context_lost = _omap4_update_context_lost;
 		soc_ops.get_context_lost = _omap4_get_context_lost;
+	} else if (soc_is_am43xx()) {
+		soc_ops.enable_module = _omap4_enable_module;
+		soc_ops.disable_module = _omap4_disable_module;
+		soc_ops.wait_target_ready = _omap4_wait_target_ready;
+		soc_ops.assert_hardreset = _omap4_assert_hardreset;
+		soc_ops.deassert_hardreset = _omap4_deassert_hardreset;
+		soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
+		soc_ops.init_clkdm = _init_clkdm;
 	} else if (soc_is_am33xx()) {
 		soc_ops.enable_module = _am33xx_enable_module;
 		soc_ops.disable_module = _am33xx_disable_module;
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index e1482a9..0f97d63 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -751,6 +751,8 @@ extern int omap3xxx_hwmod_init(void);
 extern int omap44xx_hwmod_init(void);
 extern int omap54xx_hwmod_init(void);
 extern int am33xx_hwmod_init(void);
+extern int dra7xx_hwmod_init(void);
+int am43xx_hwmod_init(void);
 
 extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois);
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
new file mode 100644
index 0000000..130332c
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h
@@ -0,0 +1,163 @@
+/*
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated
+ *
+ * Data common for AM335x and AM43x
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_33XX_43XX_COMMON_DATA_H
+#define __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_33XX_43XX_COMMON_DATA_H
+
+extern struct omap_hwmod_ocp_if am33xx_mpu__l3_main;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__l3_s;
+extern struct omap_hwmod_ocp_if am33xx_l3_s__l4_ls;
+extern struct omap_hwmod_ocp_if am33xx_l3_s__l4_wkup;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__l3_instr;
+extern struct omap_hwmod_ocp_if am33xx_mpu__prcm;
+extern struct omap_hwmod_ocp_if am33xx_l3_s__l3_main;
+extern struct omap_hwmod_ocp_if am33xx_pruss__l3_main;
+extern struct omap_hwmod_ocp_if am33xx_gfx__l3_main;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__gfx;
+extern struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc;
+extern struct omap_hwmod_ocp_if am33xx_l4_per__dcan0;
+extern struct omap_hwmod_ocp_if am33xx_l4_per__dcan1;
+extern struct omap_hwmod_ocp_if am33xx_l4_per__gpio1;
+extern struct omap_hwmod_ocp_if am33xx_l4_per__gpio2;
+extern struct omap_hwmod_ocp_if am33xx_l4_per__gpio3;
+extern struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__elm;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0;
+extern struct omap_hwmod_ocp_if am33xx_epwmss0__ecap0;
+extern struct omap_hwmod_ocp_if am33xx_epwmss0__eqep0;
+extern struct omap_hwmod_ocp_if am33xx_epwmss0__ehrpwm0;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1;
+extern struct omap_hwmod_ocp_if am33xx_epwmss1__ecap1;
+extern struct omap_hwmod_ocp_if am33xx_epwmss1__eqep1;
+extern struct omap_hwmod_ocp_if am33xx_epwmss1__ehrpwm1;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2;
+extern struct omap_hwmod_ocp_if am33xx_epwmss2__ecap2;
+extern struct omap_hwmod_ocp_if am33xx_epwmss2__eqep2;
+extern struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2;
+extern struct omap_hwmod_ocp_if am33xx_l3_s__gpmc;
+extern struct omap_hwmod_ocp_if am33xx_l4_per__i2c2;
+extern struct omap_hwmod_ocp_if am33xx_l4_per__i2c3;
+extern struct omap_hwmod_ocp_if am33xx_l4_per__mailbox;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp0;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp1;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__mmc0;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__mmc1;
+extern struct omap_hwmod_ocp_if am33xx_l3_s__mmc2;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi1;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer2;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer3;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer4;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer5;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer6;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer7;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__tpcc;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc0;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc1;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc2;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart2;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart3;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart4;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart5;
+extern struct omap_hwmod_ocp_if am33xx_l4_ls__uart6;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__ocmc;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__sha0;
+extern struct omap_hwmod_ocp_if am33xx_l3_main__aes0;
+
+extern struct omap_hwmod am33xx_l3_main_hwmod;
+extern struct omap_hwmod am33xx_l3_s_hwmod;
+extern struct omap_hwmod am33xx_l3_instr_hwmod;
+extern struct omap_hwmod am33xx_l4_ls_hwmod;
+extern struct omap_hwmod am33xx_l4_wkup_hwmod;
+extern struct omap_hwmod am33xx_mpu_hwmod;
+extern struct omap_hwmod am33xx_pruss_hwmod;
+extern struct omap_hwmod am33xx_gfx_hwmod;
+extern struct omap_hwmod am33xx_prcm_hwmod;
+extern struct omap_hwmod am33xx_aes0_hwmod;
+extern struct omap_hwmod am33xx_sha0_hwmod;
+extern struct omap_hwmod am33xx_ocmcram_hwmod;
+extern struct omap_hwmod am33xx_smartreflex0_hwmod;
+extern struct omap_hwmod am33xx_smartreflex1_hwmod;
+extern struct omap_hwmod am33xx_cpgmac0_hwmod;
+extern struct omap_hwmod am33xx_mdio_hwmod;
+extern struct omap_hwmod am33xx_dcan0_hwmod;
+extern struct omap_hwmod am33xx_dcan1_hwmod;
+extern struct omap_hwmod am33xx_elm_hwmod;
+extern struct omap_hwmod am33xx_epwmss0_hwmod;
+extern struct omap_hwmod am33xx_ecap0_hwmod;
+extern struct omap_hwmod am33xx_eqep0_hwmod;
+extern struct omap_hwmod am33xx_ehrpwm0_hwmod;
+extern struct omap_hwmod am33xx_epwmss1_hwmod;
+extern struct omap_hwmod am33xx_ecap1_hwmod;
+extern struct omap_hwmod am33xx_eqep1_hwmod;
+extern struct omap_hwmod am33xx_ehrpwm1_hwmod;
+extern struct omap_hwmod am33xx_epwmss2_hwmod;
+extern struct omap_hwmod am33xx_ecap2_hwmod;
+extern struct omap_hwmod am33xx_eqep2_hwmod;
+extern struct omap_hwmod am33xx_ehrpwm2_hwmod;
+extern struct omap_hwmod am33xx_gpio1_hwmod;
+extern struct omap_hwmod am33xx_gpio2_hwmod;
+extern struct omap_hwmod am33xx_gpio3_hwmod;
+extern struct omap_hwmod am33xx_gpmc_hwmod;
+extern struct omap_hwmod am33xx_i2c1_hwmod;
+extern struct omap_hwmod am33xx_i2c2_hwmod;
+extern struct omap_hwmod am33xx_i2c3_hwmod;
+extern struct omap_hwmod am33xx_mailbox_hwmod;
+extern struct omap_hwmod am33xx_mcasp0_hwmod;
+extern struct omap_hwmod am33xx_mcasp1_hwmod;
+extern struct omap_hwmod am33xx_mmc0_hwmod;
+extern struct omap_hwmod am33xx_mmc1_hwmod;
+extern struct omap_hwmod am33xx_mmc2_hwmod;
+extern struct omap_hwmod am33xx_rtc_hwmod;
+extern struct omap_hwmod am33xx_spi0_hwmod;
+extern struct omap_hwmod am33xx_spi1_hwmod;
+extern struct omap_hwmod am33xx_spinlock_hwmod;
+extern struct omap_hwmod am33xx_timer1_hwmod;
+extern struct omap_hwmod am33xx_timer2_hwmod;
+extern struct omap_hwmod am33xx_timer3_hwmod;
+extern struct omap_hwmod am33xx_timer4_hwmod;
+extern struct omap_hwmod am33xx_timer5_hwmod;
+extern struct omap_hwmod am33xx_timer6_hwmod;
+extern struct omap_hwmod am33xx_timer7_hwmod;
+extern struct omap_hwmod am33xx_tpcc_hwmod;
+extern struct omap_hwmod am33xx_tptc0_hwmod;
+extern struct omap_hwmod am33xx_tptc1_hwmod;
+extern struct omap_hwmod am33xx_tptc2_hwmod;
+extern struct omap_hwmod am33xx_uart1_hwmod;
+extern struct omap_hwmod am33xx_uart2_hwmod;
+extern struct omap_hwmod am33xx_uart3_hwmod;
+extern struct omap_hwmod am33xx_uart4_hwmod;
+extern struct omap_hwmod am33xx_uart5_hwmod;
+extern struct omap_hwmod am33xx_uart6_hwmod;
+extern struct omap_hwmod am33xx_wd_timer1_hwmod;
+
+extern struct omap_hwmod_class am33xx_l4_hwmod_class;
+extern struct omap_hwmod_class am33xx_wkup_m3_hwmod_class;
+extern struct omap_hwmod_class am33xx_control_hwmod_class;
+extern struct omap_hwmod_class am33xx_gpio_hwmod_class;
+extern struct omap_hwmod_class am33xx_timer_hwmod_class;
+extern struct omap_hwmod_class am33xx_epwmss_hwmod_class;
+extern struct omap_hwmod_class am33xx_ehrpwm_hwmod_class;
+extern struct omap_hwmod_class am33xx_spi_hwmod_class;
+
+extern struct omap_gpio_dev_attr gpio_dev_attr;
+extern struct omap2_mcspi_dev_attr mcspi_attrib;
+
+void omap_hwmod_am33xx_reg(void);
+void omap_hwmod_am43xx_reg(void);
+
+#endif
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
new file mode 100644
index 0000000..e2db378
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
@@ -0,0 +1,643 @@
+/*
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated
+ *
+ * Interconnects common for AM335x and AM43x
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/sizes.h>
+#include "omap_hwmod.h"
+#include "omap_hwmod_33xx_43xx_common_data.h"
+
+/* mpu -> l3 main */
+struct omap_hwmod_ocp_if am33xx_mpu__l3_main = {
+	.master		= &am33xx_mpu_hwmod,
+	.slave		= &am33xx_l3_main_hwmod,
+	.clk		= "dpll_mpu_m2_ck",
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 main -> l3 s */
+struct omap_hwmod_ocp_if am33xx_l3_main__l3_s = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_l3_s_hwmod,
+	.clk		= "l3s_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 s -> l4 per/ls */
+struct omap_hwmod_ocp_if am33xx_l3_s__l4_ls = {
+	.master		= &am33xx_l3_s_hwmod,
+	.slave		= &am33xx_l4_ls_hwmod,
+	.clk		= "l3s_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 s -> l4 wkup */
+struct omap_hwmod_ocp_if am33xx_l3_s__l4_wkup = {
+	.master		= &am33xx_l3_s_hwmod,
+	.slave		= &am33xx_l4_wkup_hwmod,
+	.clk		= "l3s_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 main -> l3 instr */
+struct omap_hwmod_ocp_if am33xx_l3_main__l3_instr = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_l3_instr_hwmod,
+	.clk		= "l3s_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mpu -> prcm */
+struct omap_hwmod_ocp_if am33xx_mpu__prcm = {
+	.master		= &am33xx_mpu_hwmod,
+	.slave		= &am33xx_prcm_hwmod,
+	.clk		= "dpll_mpu_m2_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 s -> l3 main*/
+struct omap_hwmod_ocp_if am33xx_l3_s__l3_main = {
+	.master		= &am33xx_l3_s_hwmod,
+	.slave		= &am33xx_l3_main_hwmod,
+	.clk		= "l3s_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* pru-icss -> l3 main */
+struct omap_hwmod_ocp_if am33xx_pruss__l3_main = {
+	.master		= &am33xx_pruss_hwmod,
+	.slave		= &am33xx_l3_main_hwmod,
+	.clk		= "l3_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* gfx -> l3 main */
+struct omap_hwmod_ocp_if am33xx_gfx__l3_main = {
+	.master		= &am33xx_gfx_hwmod,
+	.slave		= &am33xx_l3_main_hwmod,
+	.clk		= "dpll_core_m4_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 main -> gfx */
+struct omap_hwmod_ocp_if am33xx_l3_main__gfx = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_gfx_hwmod,
+	.clk		= "dpll_core_m4_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 wkup -> rtc */
+struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_rtc_hwmod,
+	.clk		= "clkdiv32k_ick",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per/ls -> DCAN0 */
+struct omap_hwmod_ocp_if am33xx_l4_per__dcan0 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_dcan0_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 per/ls -> DCAN1 */
+struct omap_hwmod_ocp_if am33xx_l4_per__dcan1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_dcan1_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 per/ls -> GPIO2 */
+struct omap_hwmod_ocp_if am33xx_l4_per__gpio1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_gpio1_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 per/ls -> gpio3 */
+struct omap_hwmod_ocp_if am33xx_l4_per__gpio2 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_gpio2_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 per/ls -> gpio4 */
+struct omap_hwmod_ocp_if am33xx_l4_per__gpio3 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_gpio3_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = {
+	.master		= &am33xx_cpgmac0_hwmod,
+	.slave		= &am33xx_mdio_hwmod,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am33xx_elm_addr_space[] = {
+	{
+		.pa_start	= 0x48080000,
+		.pa_end		= 0x48080000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l4_ls__elm = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_elm_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_elm_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am33xx_epwmss0_addr_space[] = {
+	{
+		.pa_start	= 0x48300000,
+		.pa_end		= 0x48300000 + SZ_16 - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_epwmss0_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_epwmss0_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_epwmss0__ecap0 = {
+	.master		= &am33xx_epwmss0_hwmod,
+	.slave		= &am33xx_ecap0_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_epwmss0__eqep0 = {
+	.master		= &am33xx_epwmss0_hwmod,
+	.slave		= &am33xx_eqep0_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_epwmss0__ehrpwm0 = {
+	.master		= &am33xx_epwmss0_hwmod,
+	.slave		= &am33xx_ehrpwm0_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+
+static struct omap_hwmod_addr_space am33xx_epwmss1_addr_space[] = {
+	{
+		.pa_start	= 0x48302000,
+		.pa_end		= 0x48302000 + SZ_16 - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_epwmss1_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_epwmss1_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_epwmss1__ecap1 = {
+	.master		= &am33xx_epwmss1_hwmod,
+	.slave		= &am33xx_ecap1_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_epwmss1__eqep1 = {
+	.master		= &am33xx_epwmss1_hwmod,
+	.slave		= &am33xx_eqep1_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_epwmss1__ehrpwm1 = {
+	.master		= &am33xx_epwmss1_hwmod,
+	.slave		= &am33xx_ehrpwm1_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am33xx_epwmss2_addr_space[] = {
+	{
+		.pa_start	= 0x48304000,
+		.pa_end		= 0x48304000 + SZ_16 - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_epwmss2_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_epwmss2_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_epwmss2__ecap2 = {
+	.master		= &am33xx_epwmss2_hwmod,
+	.slave		= &am33xx_ecap2_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_epwmss2__eqep2 = {
+	.master		= &am33xx_epwmss2_hwmod,
+	.slave		= &am33xx_eqep2_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2 = {
+	.master		= &am33xx_epwmss2_hwmod,
+	.slave		= &am33xx_ehrpwm2_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l3s cfg -> gpmc */
+static struct omap_hwmod_addr_space am33xx_gpmc_addr_space[] = {
+	{
+		.pa_start	= 0x50000000,
+		.pa_end		= 0x50000000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = {
+	.master		= &am33xx_l3_s_hwmod,
+	.slave		= &am33xx_gpmc_hwmod,
+	.clk		= "l3s_gclk",
+	.addr		= am33xx_gpmc_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* i2c2 */
+struct omap_hwmod_ocp_if am33xx_l4_per__i2c2 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_i2c2_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+struct omap_hwmod_ocp_if am33xx_l4_per__i2c3 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_i2c3_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space am33xx_mailbox_addrs[] = {
+	{
+		.pa_start	= 0x480C8000,
+		.pa_end		= 0x480C8000 + (SZ_4K - 1),
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4 ls -> mailbox */
+struct omap_hwmod_ocp_if am33xx_l4_per__mailbox = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_mailbox_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_mailbox_addrs,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> spinlock */
+struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_spinlock_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> mcasp0 */
+static struct omap_hwmod_addr_space am33xx_mcasp0_addr_space[] = {
+	{
+		.pa_start	= 0x48038000,
+		.pa_end		= 0x48038000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp0 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_mcasp0_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_mcasp0_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> mcasp1 */
+static struct omap_hwmod_addr_space am33xx_mcasp1_addr_space[] = {
+	{
+		.pa_start	= 0x4803C000,
+		.pa_end		= 0x4803C000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_mcasp1_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_mcasp1_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> mmc0 */
+static struct omap_hwmod_addr_space am33xx_mmc0_addr_space[] = {
+	{
+		.pa_start	= 0x48060100,
+		.pa_end		= 0x48060100 + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l4_ls__mmc0 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_mmc0_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_mmc0_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> mmc1 */
+static struct omap_hwmod_addr_space am33xx_mmc1_addr_space[] = {
+	{
+		.pa_start	= 0x481d8100,
+		.pa_end		= 0x481d8100 + SZ_4K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l4_ls__mmc1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_mmc1_hwmod,
+	.clk		= "l4ls_gclk",
+	.addr		= am33xx_mmc1_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 s -> mmc2 */
+static struct omap_hwmod_addr_space am33xx_mmc2_addr_space[] = {
+	{
+		.pa_start	= 0x47810100,
+		.pa_end		= 0x47810100 + SZ_64K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l3_s__mmc2 = {
+	.master		= &am33xx_l3_s_hwmod,
+	.slave		= &am33xx_mmc2_hwmod,
+	.clk		= "l3s_gclk",
+	.addr		= am33xx_mmc2_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> mcspi0 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_spi0_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> mcspi1 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_spi1_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per -> timer2 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__timer2 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_timer2_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per -> timer3 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__timer3 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_timer3_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per -> timer4 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__timer4 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_timer4_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per -> timer5 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__timer5 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_timer5_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per -> timer6 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__timer6 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_timer6_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 per -> timer7 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__timer7 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_timer7_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 main -> tpcc */
+struct omap_hwmod_ocp_if am33xx_l3_main__tpcc = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_tpcc_hwmod,
+	.clk		= "l3_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 main -> tpcc0 */
+static struct omap_hwmod_addr_space am33xx_tptc0_addr_space[] = {
+	{
+		.pa_start	= 0x49800000,
+		.pa_end		= 0x49800000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l3_main__tptc0 = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_tptc0_hwmod,
+	.clk		= "l3_gclk",
+	.addr		= am33xx_tptc0_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 main -> tpcc1 */
+static struct omap_hwmod_addr_space am33xx_tptc1_addr_space[] = {
+	{
+		.pa_start	= 0x49900000,
+		.pa_end		= 0x49900000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l3_main__tptc1 = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_tptc1_hwmod,
+	.clk		= "l3_gclk",
+	.addr		= am33xx_tptc1_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 main -> tpcc2 */
+static struct omap_hwmod_addr_space am33xx_tptc2_addr_space[] = {
+	{
+		.pa_start	= 0x49a00000,
+		.pa_end		= 0x49a00000 + SZ_8K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l3_main__tptc2 = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_tptc2_hwmod,
+	.clk		= "l3_gclk",
+	.addr		= am33xx_tptc2_addr_space,
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> uart2 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__uart2 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_uart2_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> uart3 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__uart3 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_uart3_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> uart4 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__uart4 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_uart4_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> uart5 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__uart5 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_uart5_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4 ls -> uart6 */
+struct omap_hwmod_ocp_if am33xx_l4_ls__uart6 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_uart6_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+/* l3 main -> ocmc */
+struct omap_hwmod_ocp_if am33xx_l3_main__ocmc = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_ocmcram_hwmod,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 main -> sha0 HIB2 */
+static struct omap_hwmod_addr_space am33xx_sha0_addrs[] = {
+	{
+		.pa_start	= 0x53100000,
+		.pa_end		= 0x53100000 + SZ_512 - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l3_main__sha0 = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_sha0_hwmod,
+	.clk		= "sha0_fck",
+	.addr		= am33xx_sha0_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3 main -> AES0 HIB2 */
+static struct omap_hwmod_addr_space am33xx_aes0_addrs[] = {
+	{
+		.pa_start	= 0x53500000,
+		.pa_end		= 0x53500000 + SZ_1M - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+struct omap_hwmod_ocp_if am33xx_l3_main__aes0 = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_aes0_hwmod,
+	.clk		= "aes0_fck",
+	.addr		= am33xx_aes0_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
new file mode 100644
index 0000000..0f17862
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -0,0 +1,1469 @@
+/*
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated
+ *
+ * Hwmod common for AM335x and AM43x
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+#include "omap_hwmod.h"
+#include "i2c.h"
+#include "mmc.h"
+#include "wd_timer.h"
+#include "cm33xx.h"
+#include "prm33xx.h"
+#include "omap_hwmod_33xx_43xx_common_data.h"
+#include "prcm43xx.h"
+
+#define CLKCTRL(oh, clkctrl) ((oh).prcm.omap4.clkctrl_offs = (clkctrl))
+#define RSTCTRL(oh, rstctrl) ((oh).prcm.omap4.rstctrl_offs = (rstctrl))
+#define RSTST(oh, rstst) ((oh).prcm.omap4.rstst_offs = (rstst))
+
+/*
+ * 'l3' class
+ * instance(s): l3_main, l3_s, l3_instr
+ */
+static struct omap_hwmod_class am33xx_l3_hwmod_class = {
+	.name		= "l3",
+};
+
+struct omap_hwmod am33xx_l3_main_hwmod = {
+	.name		= "l3_main",
+	.class		= &am33xx_l3_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE,
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* l3_s */
+struct omap_hwmod am33xx_l3_s_hwmod = {
+	.name		= "l3_s",
+	.class		= &am33xx_l3_hwmod_class,
+	.clkdm_name	= "l3s_clkdm",
+};
+
+/* l3_instr */
+struct omap_hwmod am33xx_l3_instr_hwmod = {
+	.name		= "l3_instr",
+	.class		= &am33xx_l3_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE,
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'l4' class
+ * instance(s): l4_ls, l4_hs, l4_wkup, l4_fw
+ */
+struct omap_hwmod_class am33xx_l4_hwmod_class = {
+	.name		= "l4",
+};
+
+/* l4_ls */
+struct omap_hwmod am33xx_l4_ls_hwmod = {
+	.name		= "l4_ls",
+	.class		= &am33xx_l4_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE,
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* l4_wkup */
+struct omap_hwmod am33xx_l4_wkup_hwmod = {
+	.name		= "l4_wkup",
+	.class		= &am33xx_l4_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE,
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'mpu' class
+ */
+static struct omap_hwmod_class am33xx_mpu_hwmod_class = {
+	.name	= "mpu",
+};
+
+struct omap_hwmod am33xx_mpu_hwmod = {
+	.name		= "mpu",
+	.class		= &am33xx_mpu_hwmod_class,
+	.clkdm_name	= "mpu_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE,
+	.main_clk	= "dpll_mpu_m2_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'wakeup m3' class
+ * Wakeup controller sub-system under wakeup domain
+ */
+struct omap_hwmod_class am33xx_wkup_m3_hwmod_class = {
+	.name		= "wkup_m3",
+};
+
+/*
+ * 'pru-icss' class
+ * Programmable Real-Time Unit and Industrial Communication Subsystem
+ */
+static struct omap_hwmod_class am33xx_pruss_hwmod_class = {
+	.name	= "pruss",
+};
+
+static struct omap_hwmod_rst_info am33xx_pruss_resets[] = {
+	{ .name = "pruss", .rst_shift = 1 },
+};
+
+/* pru-icss */
+/* Pseudo hwmod for reset control purpose only */
+struct omap_hwmod am33xx_pruss_hwmod = {
+	.name		= "pruss",
+	.class		= &am33xx_pruss_hwmod_class,
+	.clkdm_name	= "pruss_ocp_clkdm",
+	.main_clk	= "pruss_ocp_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.rst_lines	= am33xx_pruss_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(am33xx_pruss_resets),
+};
+
+/* gfx */
+/* Pseudo hwmod for reset control purpose only */
+static struct omap_hwmod_class am33xx_gfx_hwmod_class = {
+	.name	= "gfx",
+};
+
+static struct omap_hwmod_rst_info am33xx_gfx_resets[] = {
+	{ .name = "gfx", .rst_shift = 0, .st_shift = 0},
+};
+
+struct omap_hwmod am33xx_gfx_hwmod = {
+	.name		= "gfx",
+	.class		= &am33xx_gfx_hwmod_class,
+	.clkdm_name	= "gfx_l3_clkdm",
+	.main_clk	= "gfx_fck_div_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.rst_lines	= am33xx_gfx_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(am33xx_gfx_resets),
+};
+
+/*
+ * 'prcm' class
+ * power and reset manager (whole prcm infrastructure)
+ */
+static struct omap_hwmod_class am33xx_prcm_hwmod_class = {
+	.name	= "prcm",
+};
+
+/* prcm */
+struct omap_hwmod am33xx_prcm_hwmod = {
+	.name		= "prcm",
+	.class		= &am33xx_prcm_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+};
+
+/*
+ * 'aes0' class
+ */
+static struct omap_hwmod_class_sysconfig am33xx_aes0_sysc = {
+	.rev_offs	= 0x80,
+	.sysc_offs	= 0x84,
+	.syss_offs	= 0x88,
+	.sysc_flags	= SYSS_HAS_RESET_STATUS,
+};
+
+static struct omap_hwmod_class am33xx_aes0_hwmod_class = {
+	.name		= "aes0",
+	.sysc		= &am33xx_aes0_sysc,
+};
+
+struct omap_hwmod am33xx_aes0_hwmod = {
+	.name		= "aes",
+	.class		= &am33xx_aes0_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.main_clk	= "aes0_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* sha0 HIB2 (the 'P' (public) device) */
+static struct omap_hwmod_class_sysconfig am33xx_sha0_sysc = {
+	.rev_offs	= 0x100,
+	.sysc_offs	= 0x110,
+	.syss_offs	= 0x114,
+	.sysc_flags	= SYSS_HAS_RESET_STATUS,
+};
+
+static struct omap_hwmod_class am33xx_sha0_hwmod_class = {
+	.name		= "sha0",
+	.sysc		= &am33xx_sha0_sysc,
+};
+
+struct omap_hwmod am33xx_sha0_hwmod = {
+	.name		= "sham",
+	.class		= &am33xx_sha0_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* ocmcram */
+static struct omap_hwmod_class am33xx_ocmcram_hwmod_class = {
+	.name = "ocmcram",
+};
+
+struct omap_hwmod am33xx_ocmcram_hwmod = {
+	.name		= "ocmcram",
+	.class		= &am33xx_ocmcram_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE,
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* 'smartreflex' class */
+static struct omap_hwmod_class am33xx_smartreflex_hwmod_class = {
+	.name		= "smartreflex",
+};
+
+/* smartreflex0 */
+struct omap_hwmod am33xx_smartreflex0_hwmod = {
+	.name		= "smartreflex0",
+	.class		= &am33xx_smartreflex_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.main_clk	= "smartreflex0_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* smartreflex1 */
+struct omap_hwmod am33xx_smartreflex1_hwmod = {
+	.name		= "smartreflex1",
+	.class		= &am33xx_smartreflex_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.main_clk	= "smartreflex1_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'control' module class
+ */
+struct omap_hwmod_class am33xx_control_hwmod_class = {
+	.name		= "control",
+};
+
+/*
+ * 'cpgmac' class
+ * cpsw/cpgmac sub system
+ */
+static struct omap_hwmod_class_sysconfig am33xx_cpgmac_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x8,
+	.syss_offs	= 0x4,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
+			   SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | MSTANDBY_FORCE |
+			   MSTANDBY_NO),
+	.sysc_fields	= &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class am33xx_cpgmac0_hwmod_class = {
+	.name		= "cpgmac0",
+	.sysc		= &am33xx_cpgmac_sysc,
+};
+
+struct omap_hwmod am33xx_cpgmac0_hwmod = {
+	.name		= "cpgmac0",
+	.class		= &am33xx_cpgmac0_hwmod_class,
+	.clkdm_name	= "cpsw_125mhz_clkdm",
+	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
+	.main_clk	= "cpsw_125mhz_gclk",
+	.mpu_rt_idx	= 1,
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * mdio class
+ */
+static struct omap_hwmod_class am33xx_mdio_hwmod_class = {
+	.name		= "davinci_mdio",
+};
+
+struct omap_hwmod am33xx_mdio_hwmod = {
+	.name		= "davinci_mdio",
+	.class		= &am33xx_mdio_hwmod_class,
+	.clkdm_name	= "cpsw_125mhz_clkdm",
+	.main_clk	= "cpsw_125mhz_gclk",
+};
+
+/*
+ * dcan class
+ */
+static struct omap_hwmod_class am33xx_dcan_hwmod_class = {
+	.name = "d_can",
+};
+
+/* dcan0 */
+struct omap_hwmod am33xx_dcan0_hwmod = {
+	.name		= "d_can0",
+	.class		= &am33xx_dcan_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "dcan0_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* dcan1 */
+struct omap_hwmod am33xx_dcan1_hwmod = {
+	.name		= "d_can1",
+	.class		= &am33xx_dcan_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "dcan1_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* elm */
+static struct omap_hwmod_class_sysconfig am33xx_elm_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+			SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_elm_hwmod_class = {
+	.name		= "elm",
+	.sysc		= &am33xx_elm_sysc,
+};
+
+struct omap_hwmod am33xx_elm_hwmod = {
+	.name		= "elm",
+	.class		= &am33xx_elm_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* pwmss  */
+static struct omap_hwmod_class_sysconfig am33xx_epwmss_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x4,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+struct omap_hwmod_class am33xx_epwmss_hwmod_class = {
+	.name		= "epwmss",
+	.sysc		= &am33xx_epwmss_sysc,
+};
+
+static struct omap_hwmod_class am33xx_ecap_hwmod_class = {
+	.name		= "ecap",
+};
+
+static struct omap_hwmod_class am33xx_eqep_hwmod_class = {
+	.name		= "eqep",
+};
+
+struct omap_hwmod_class am33xx_ehrpwm_hwmod_class = {
+	.name		= "ehrpwm",
+};
+
+/* epwmss0 */
+struct omap_hwmod am33xx_epwmss0_hwmod = {
+	.name		= "epwmss0",
+	.class		= &am33xx_epwmss_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* ecap0 */
+struct omap_hwmod am33xx_ecap0_hwmod = {
+	.name		= "ecap0",
+	.class		= &am33xx_ecap_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+/* eqep0 */
+struct omap_hwmod am33xx_eqep0_hwmod = {
+	.name		= "eqep0",
+	.class		= &am33xx_eqep_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+/* ehrpwm0 */
+struct omap_hwmod am33xx_ehrpwm0_hwmod = {
+	.name		= "ehrpwm0",
+	.class		= &am33xx_ehrpwm_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+/* epwmss1 */
+struct omap_hwmod am33xx_epwmss1_hwmod = {
+	.name		= "epwmss1",
+	.class		= &am33xx_epwmss_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* ecap1 */
+struct omap_hwmod am33xx_ecap1_hwmod = {
+	.name		= "ecap1",
+	.class		= &am33xx_ecap_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+/* eqep1 */
+struct omap_hwmod am33xx_eqep1_hwmod = {
+	.name		= "eqep1",
+	.class		= &am33xx_eqep_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+/* ehrpwm1 */
+struct omap_hwmod am33xx_ehrpwm1_hwmod = {
+	.name		= "ehrpwm1",
+	.class		= &am33xx_ehrpwm_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+/* epwmss2 */
+struct omap_hwmod am33xx_epwmss2_hwmod = {
+	.name		= "epwmss2",
+	.class		= &am33xx_epwmss_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* ecap2 */
+struct omap_hwmod am33xx_ecap2_hwmod = {
+	.name		= "ecap2",
+	.class		= &am33xx_ecap_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+/* eqep2 */
+struct omap_hwmod am33xx_eqep2_hwmod = {
+	.name		= "eqep2",
+	.class		= &am33xx_eqep_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+/* ehrpwm2 */
+struct omap_hwmod am33xx_ehrpwm2_hwmod = {
+	.name		= "ehrpwm2",
+	.class		= &am33xx_ehrpwm_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+/*
+ * 'gpio' class: for gpio 0,1,2,3
+ */
+static struct omap_hwmod_class_sysconfig am33xx_gpio_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0114,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
+			  SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			  SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			  SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+struct omap_hwmod_class am33xx_gpio_hwmod_class = {
+	.name		= "gpio",
+	.sysc		= &am33xx_gpio_sysc,
+	.rev		= 2,
+};
+
+struct omap_gpio_dev_attr gpio_dev_attr = {
+	.bank_width	= 32,
+	.dbck_flag	= true,
+};
+
+/* gpio1 */
+static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio1_dbclk" },
+};
+
+struct omap_hwmod am33xx_gpio1_hwmod = {
+	.name		= "gpio2",
+	.class		= &am33xx_gpio_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= gpio1_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio1_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/* gpio2 */
+static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio2_dbclk" },
+};
+
+struct omap_hwmod am33xx_gpio2_hwmod = {
+	.name		= "gpio3",
+	.class		= &am33xx_gpio_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= gpio2_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio2_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/* gpio3 */
+static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio3_dbclk" },
+};
+
+struct omap_hwmod am33xx_gpio3_hwmod = {
+	.name		= "gpio4",
+	.class		= &am33xx_gpio_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= gpio3_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio3_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/* gpmc */
+static struct omap_hwmod_class_sysconfig gpmc_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x10,
+	.syss_offs	= 0x14,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
+			SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_gpmc_hwmod_class = {
+	.name		= "gpmc",
+	.sysc		= &gpmc_sysc,
+};
+
+struct omap_hwmod am33xx_gpmc_hwmod = {
+	.name		= "gpmc",
+	.class		= &am33xx_gpmc_hwmod_class,
+	.clkdm_name	= "l3s_clkdm",
+	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.main_clk	= "l3s_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* 'i2c' class */
+static struct omap_hwmod_class_sysconfig am33xx_i2c_sysc = {
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0090,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			  SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			  SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			  SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class i2c_class = {
+	.name		= "i2c",
+	.sysc		= &am33xx_i2c_sysc,
+	.rev		= OMAP_I2C_IP_VERSION_2,
+	.reset		= &omap_i2c_reset,
+};
+
+static struct omap_i2c_dev_attr i2c_dev_attr = {
+	.flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE,
+};
+
+/* i2c1 */
+struct omap_hwmod am33xx_i2c1_hwmod = {
+	.name		= "i2c1",
+	.class		= &i2c_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+	.main_clk	= "dpll_per_m2_div4_wkupdm_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &i2c_dev_attr,
+};
+
+/* i2c1 */
+struct omap_hwmod am33xx_i2c2_hwmod = {
+	.name		= "i2c2",
+	.class		= &i2c_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4 = {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &i2c_dev_attr,
+};
+
+/* i2c3 */
+struct omap_hwmod am33xx_i2c3_hwmod = {
+	.name		= "i2c3",
+	.class		= &i2c_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &i2c_dev_attr,
+};
+
+/*
+ * 'mailbox' class
+ * mailbox module allowing communication between the on-chip processors using a
+ * queued mailbox-interrupt mechanism.
+ */
+static struct omap_hwmod_class_sysconfig am33xx_mailbox_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
+			  SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am33xx_mailbox_hwmod_class = {
+	.name	= "mailbox",
+	.sysc	= &am33xx_mailbox_sysc,
+};
+
+struct omap_hwmod am33xx_mailbox_hwmod = {
+	.name		= "mailbox",
+	.class		= &am33xx_mailbox_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm = {
+		.omap4 = {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'mcasp' class
+ */
+static struct omap_hwmod_class_sysconfig am33xx_mcasp_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x4,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE,
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class am33xx_mcasp_hwmod_class = {
+	.name		= "mcasp",
+	.sysc		= &am33xx_mcasp_sysc,
+};
+
+/* mcasp0 */
+struct omap_hwmod am33xx_mcasp0_hwmod = {
+	.name		= "mcasp0",
+	.class		= &am33xx_mcasp_hwmod_class,
+	.clkdm_name	= "l3s_clkdm",
+	.main_clk	= "mcasp0_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* mcasp1 */
+struct omap_hwmod am33xx_mcasp1_hwmod = {
+	.name		= "mcasp1",
+	.class		= &am33xx_mcasp_hwmod_class,
+	.clkdm_name	= "l3s_clkdm",
+	.main_clk	= "mcasp1_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* 'mmc' class */
+static struct omap_hwmod_class_sysconfig am33xx_mmc_sysc = {
+	.rev_offs	= 0x1fc,
+	.sysc_offs	= 0x10,
+	.syss_offs	= 0x14,
+	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+			  SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+			  SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_mmc_hwmod_class = {
+	.name		= "mmc",
+	.sysc		= &am33xx_mmc_sysc,
+};
+
+/* mmc0 */
+static struct omap_mmc_dev_attr am33xx_mmc0_dev_attr = {
+	.flags		= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
+};
+
+struct omap_hwmod am33xx_mmc0_hwmod = {
+	.name		= "mmc1",
+	.class		= &am33xx_mmc_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "mmc_clk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &am33xx_mmc0_dev_attr,
+};
+
+/* mmc1 */
+static struct omap_mmc_dev_attr am33xx_mmc1_dev_attr = {
+	.flags		= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
+};
+
+struct omap_hwmod am33xx_mmc1_hwmod = {
+	.name		= "mmc2",
+	.class		= &am33xx_mmc_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "mmc_clk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &am33xx_mmc1_dev_attr,
+};
+
+/* mmc2 */
+static struct omap_mmc_dev_attr am33xx_mmc2_dev_attr = {
+	.flags		= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
+};
+struct omap_hwmod am33xx_mmc2_hwmod = {
+	.name		= "mmc3",
+	.class		= &am33xx_mmc_hwmod_class,
+	.clkdm_name	= "l3s_clkdm",
+	.main_clk	= "mmc_clk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &am33xx_mmc2_dev_attr,
+};
+
+/*
+ * 'rtc' class
+ * rtc subsystem
+ */
+static struct omap_hwmod_class_sysconfig am33xx_rtc_sysc = {
+	.rev_offs	= 0x0074,
+	.sysc_offs	= 0x0078,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE,
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO |
+			  SIDLE_SMART | SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class am33xx_rtc_hwmod_class = {
+	.name		= "rtc",
+	.sysc		= &am33xx_rtc_sysc,
+};
+
+struct omap_hwmod am33xx_rtc_hwmod = {
+	.name		= "rtc",
+	.class		= &am33xx_rtc_hwmod_class,
+	.clkdm_name	= "l4_rtc_clkdm",
+	.main_clk	= "clk_32768_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* 'spi' class */
+static struct omap_hwmod_class_sysconfig am33xx_mcspi_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0110,
+	.syss_offs	= 0x0114,
+	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+			  SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			  SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+struct omap_hwmod_class am33xx_spi_hwmod_class = {
+	.name		= "mcspi",
+	.sysc		= &am33xx_mcspi_sysc,
+	.rev		= OMAP4_MCSPI_REV,
+};
+
+/* spi0 */
+struct omap2_mcspi_dev_attr mcspi_attrib = {
+	.num_chipselect	= 2,
+};
+struct omap_hwmod am33xx_spi0_hwmod = {
+	.name		= "spi0",
+	.class		= &am33xx_spi_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mcspi_attrib,
+};
+
+/* spi1 */
+struct omap_hwmod am33xx_spi1_hwmod = {
+	.name		= "spi1",
+	.class		= &am33xx_spi_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mcspi_attrib,
+};
+
+/*
+ * 'spinlock' class
+ * spinlock provides hardware assistance for synchronizing the
+ * processes running on multiple processors
+ */
+
+static struct omap_hwmod_class_sysconfig am33xx_spinlock_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_spinlock_hwmod_class = {
+	.name		= "spinlock",
+	.sysc		= &am33xx_spinlock_sysc,
+};
+
+struct omap_hwmod am33xx_spinlock_hwmod = {
+	.name		= "spinlock",
+	.class		= &am33xx_spinlock_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* 'timer 2-7' class */
+static struct omap_hwmod_class_sysconfig am33xx_timer_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			  SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+struct omap_hwmod_class am33xx_timer_hwmod_class = {
+	.name		= "timer",
+	.sysc		= &am33xx_timer_sysc,
+};
+
+/* timer1 1ms */
+static struct omap_hwmod_class_sysconfig am33xx_timer1ms_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+			SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_timer1ms_hwmod_class = {
+	.name		= "timer",
+	.sysc		= &am33xx_timer1ms_sysc,
+};
+
+struct omap_hwmod am33xx_timer1_hwmod = {
+	.name		= "timer1",
+	.class		= &am33xx_timer1ms_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.main_clk	= "timer1_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_timer2_hwmod = {
+	.name		= "timer2",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer2_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_timer3_hwmod = {
+	.name		= "timer3",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer3_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_timer4_hwmod = {
+	.name		= "timer4",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer4_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_timer5_hwmod = {
+	.name		= "timer5",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer5_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_timer6_hwmod = {
+	.name		= "timer6",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer6_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_timer7_hwmod = {
+	.name		= "timer7",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer7_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* tpcc */
+static struct omap_hwmod_class am33xx_tpcc_hwmod_class = {
+	.name		= "tpcc",
+};
+
+struct omap_hwmod am33xx_tpcc_hwmod = {
+	.name		= "tpcc",
+	.class		= &am33xx_tpcc_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_class_sysconfig am33xx_tptc_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x10,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			  SYSC_HAS_MIDLEMODE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_SMART | MSTANDBY_FORCE),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+/* 'tptc' class */
+static struct omap_hwmod_class am33xx_tptc_hwmod_class = {
+	.name		= "tptc",
+	.sysc		= &am33xx_tptc_sysc,
+};
+
+/* tptc0 */
+struct omap_hwmod am33xx_tptc0_hwmod = {
+	.name		= "tptc0",
+	.class		= &am33xx_tptc_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* tptc1 */
+struct omap_hwmod am33xx_tptc1_hwmod = {
+	.name		= "tptc1",
+	.class		= &am33xx_tptc_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* tptc2 */
+struct omap_hwmod am33xx_tptc2_hwmod = {
+	.name		= "tptc2",
+	.class		= &am33xx_tptc_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
+	.main_clk	= "l3_gclk",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* 'uart' class */
+static struct omap_hwmod_class_sysconfig uart_sysc = {
+	.rev_offs	= 0x50,
+	.sysc_offs	= 0x54,
+	.syss_offs	= 0x58,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
+			  SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			  SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class uart_class = {
+	.name		= "uart",
+	.sysc		= &uart_sysc,
+};
+
+struct omap_hwmod am33xx_uart1_hwmod = {
+	.name		= "uart1",
+	.class		= &uart_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.flags		= DEBUG_AM33XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
+	.main_clk	= "dpll_per_m2_div4_wkupdm_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_uart2_hwmod = {
+	.name		= "uart2",
+	.class		= &uart_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* uart3 */
+struct omap_hwmod am33xx_uart3_hwmod = {
+	.name		= "uart3",
+	.class		= &uart_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_uart4_hwmod = {
+	.name		= "uart4",
+	.class		= &uart_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_uart5_hwmod = {
+	.name		= "uart5",
+	.class		= &uart_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+struct omap_hwmod am33xx_uart6_hwmod = {
+	.name		= "uart6",
+	.class		= &uart_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* 'wd_timer' class */
+static struct omap_hwmod_class_sysconfig wdt_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x10,
+	.syss_offs	= 0x14,
+	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE |
+			SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_wd_timer_hwmod_class = {
+	.name		= "wd_timer",
+	.sysc		= &wdt_sysc,
+	.pre_shutdown	= &omap2_wd_timer_disable,
+};
+
+/*
+ * XXX: device.c file uses hardcoded name for watchdog timer
+ * driver "wd_timer2, so we are also using same name as of now...
+ */
+struct omap_hwmod am33xx_wd_timer1_hwmod = {
+	.name		= "wd_timer2",
+	.class		= &am33xx_wd_timer_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE,
+	.main_clk	= "wdt1_fck",
+	.prcm		= {
+		.omap4	= {
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static void omap_hwmod_am33xx_clkctrl(void)
+{
+	CLKCTRL(am33xx_uart2_hwmod, AM33XX_CM_PER_UART1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart3_hwmod, AM33XX_CM_PER_UART2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart4_hwmod, AM33XX_CM_PER_UART3_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart5_hwmod, AM33XX_CM_PER_UART4_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart6_hwmod, AM33XX_CM_PER_UART5_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_dcan0_hwmod, AM33XX_CM_PER_DCAN0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_dcan1_hwmod, AM33XX_CM_PER_DCAN1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_elm_hwmod, AM33XX_CM_PER_ELM_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_epwmss0_hwmod, AM33XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_epwmss1_hwmod, AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_epwmss2_hwmod, AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gpio1_hwmod, AM33XX_CM_PER_GPIO1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gpio2_hwmod, AM33XX_CM_PER_GPIO2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gpio3_hwmod, AM33XX_CM_PER_GPIO3_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_i2c2_hwmod, AM33XX_CM_PER_I2C1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_i2c3_hwmod, AM33XX_CM_PER_I2C2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mailbox_hwmod, AM33XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mcasp0_hwmod, AM33XX_CM_PER_MCASP0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mcasp1_hwmod, AM33XX_CM_PER_MCASP1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mmc0_hwmod, AM33XX_CM_PER_MMC0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mmc1_hwmod, AM33XX_CM_PER_MMC1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_spi0_hwmod, AM33XX_CM_PER_SPI0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_spi1_hwmod, AM33XX_CM_PER_SPI1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_spinlock_hwmod, AM33XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer2_hwmod, AM33XX_CM_PER_TIMER2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer3_hwmod, AM33XX_CM_PER_TIMER3_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer4_hwmod, AM33XX_CM_PER_TIMER4_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer5_hwmod, AM33XX_CM_PER_TIMER5_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer6_hwmod, AM33XX_CM_PER_TIMER6_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer7_hwmod, AM33XX_CM_PER_TIMER7_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_smartreflex0_hwmod,
+		AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_smartreflex1_hwmod,
+		AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart1_hwmod, AM33XX_CM_WKUP_UART0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer1_hwmod, AM33XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_i2c1_hwmod, AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_wd_timer1_hwmod, AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_rtc_hwmod, AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mmc2_hwmod, AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gpmc_hwmod, AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_l4_ls_hwmod, AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_l4_wkup_hwmod, AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_l3_main_hwmod, AM33XX_CM_PER_L3_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_tpcc_hwmod, AM33XX_CM_PER_TPCC_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_tptc0_hwmod, AM33XX_CM_PER_TPTC0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_tptc1_hwmod, AM33XX_CM_PER_TPTC1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_tptc2_hwmod, AM33XX_CM_PER_TPTC2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gfx_hwmod, AM33XX_CM_GFX_GFX_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_cpgmac0_hwmod, AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_pruss_hwmod, AM33XX_CM_PER_PRUSS_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mpu_hwmod , AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_l3_instr_hwmod , AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_ocmcram_hwmod , AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_sha0_hwmod , AM33XX_CM_PER_SHA0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_aes0_hwmod , AM33XX_CM_PER_AES0_CLKCTRL_OFFSET);
+}
+
+static void omap_hwmod_am33xx_rst(void)
+{
+	RSTCTRL(am33xx_pruss_hwmod, AM33XX_RM_PER_RSTCTRL_OFFSET);
+	RSTCTRL(am33xx_gfx_hwmod, AM33XX_RM_GFX_RSTCTRL_OFFSET);
+	RSTST(am33xx_gfx_hwmod, AM33XX_RM_GFX_RSTST_OFFSET);
+}
+
+void omap_hwmod_am33xx_reg(void)
+{
+	omap_hwmod_am33xx_clkctrl();
+	omap_hwmod_am33xx_rst();
+}
+
+static void omap_hwmod_am43xx_clkctrl(void)
+{
+	CLKCTRL(am33xx_uart2_hwmod, AM43XX_CM_PER_UART1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart3_hwmod, AM43XX_CM_PER_UART2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart4_hwmod, AM43XX_CM_PER_UART3_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart5_hwmod, AM43XX_CM_PER_UART4_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart6_hwmod, AM43XX_CM_PER_UART5_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_dcan0_hwmod, AM43XX_CM_PER_DCAN0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_dcan1_hwmod, AM43XX_CM_PER_DCAN1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_elm_hwmod, AM43XX_CM_PER_ELM_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_epwmss0_hwmod, AM43XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_epwmss1_hwmod, AM43XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_epwmss2_hwmod, AM43XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gpio1_hwmod, AM43XX_CM_PER_GPIO1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gpio2_hwmod, AM43XX_CM_PER_GPIO2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gpio3_hwmod, AM43XX_CM_PER_GPIO3_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_i2c2_hwmod, AM43XX_CM_PER_I2C1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_i2c3_hwmod, AM43XX_CM_PER_I2C2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mailbox_hwmod, AM43XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mcasp0_hwmod, AM43XX_CM_PER_MCASP0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mcasp1_hwmod, AM43XX_CM_PER_MCASP1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mmc0_hwmod, AM43XX_CM_PER_MMC0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mmc1_hwmod, AM43XX_CM_PER_MMC1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_spi0_hwmod, AM43XX_CM_PER_SPI0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_spi1_hwmod, AM43XX_CM_PER_SPI1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_spinlock_hwmod, AM43XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer2_hwmod, AM43XX_CM_PER_TIMER2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer3_hwmod, AM43XX_CM_PER_TIMER3_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer4_hwmod, AM43XX_CM_PER_TIMER4_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer5_hwmod, AM43XX_CM_PER_TIMER5_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer6_hwmod, AM43XX_CM_PER_TIMER6_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer7_hwmod, AM43XX_CM_PER_TIMER7_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_smartreflex0_hwmod,
+		AM43XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_smartreflex1_hwmod,
+		AM43XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_uart1_hwmod, AM43XX_CM_WKUP_UART0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_timer1_hwmod, AM43XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_i2c1_hwmod, AM43XX_CM_WKUP_I2C0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_wd_timer1_hwmod, AM43XX_CM_WKUP_WDT1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_rtc_hwmod, AM43XX_CM_RTC_RTC_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mmc2_hwmod, AM43XX_CM_PER_MMC2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gpmc_hwmod, AM43XX_CM_PER_GPMC_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_l4_ls_hwmod, AM43XX_CM_PER_L4LS_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_l4_wkup_hwmod, AM43XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_l3_main_hwmod, AM43XX_CM_PER_L3_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_tpcc_hwmod, AM43XX_CM_PER_TPCC_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_tptc0_hwmod, AM43XX_CM_PER_TPTC0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_tptc1_hwmod, AM43XX_CM_PER_TPTC1_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_tptc2_hwmod, AM43XX_CM_PER_TPTC2_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_gfx_hwmod, AM43XX_CM_GFX_GFX_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_cpgmac0_hwmod, AM43XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_pruss_hwmod, AM43XX_CM_PER_PRUSS_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_mpu_hwmod , AM43XX_CM_MPU_MPU_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_l3_instr_hwmod , AM43XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_ocmcram_hwmod , AM43XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_sha0_hwmod , AM43XX_CM_PER_SHA0_CLKCTRL_OFFSET);
+	CLKCTRL(am33xx_aes0_hwmod , AM43XX_CM_PER_AES0_CLKCTRL_OFFSET);
+}
+
+static void omap_hwmod_am43xx_rst(void)
+{
+	RSTCTRL(am33xx_pruss_hwmod, AM43XX_RM_PER_RSTCTRL_OFFSET);
+	RSTCTRL(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTCTRL_OFFSET);
+	RSTST(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTST_OFFSET);
+}
+
+void omap_hwmod_am43xx_reg(void)
+{
+	omap_hwmod_am43xx_clkctrl();
+	omap_hwmod_am43xx_rst();
+}
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index eb2f3b9..6b406ca 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -29,6 +29,7 @@
 #include "i2c.h"
 #include "mmc.h"
 #include "wd_timer.h"
+#include "omap_hwmod_33xx_43xx_common_data.h"
 
 /*
  * IP blocks
@@ -52,7 +53,7 @@ static struct omap_hwmod am33xx_emif_hwmod = {
 	.name		= "emif",
 	.class		= &am33xx_emif_hwmod_class,
 	.clkdm_name	= "l3_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "dpll_ddr_m2_div2_ck",
 	.prcm		= {
 		.omap4	= {
@@ -62,79 +63,12 @@ static struct omap_hwmod am33xx_emif_hwmod = {
 	},
 };
 
-/*
- * 'l3' class
- * instance(s): l3_main, l3_s, l3_instr
- */
-static struct omap_hwmod_class am33xx_l3_hwmod_class = {
-	.name		= "l3",
-};
-
-static struct omap_hwmod am33xx_l3_main_hwmod = {
-	.name		= "l3_main",
-	.class		= &am33xx_l3_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_L3_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* l3_s */
-static struct omap_hwmod am33xx_l3_s_hwmod = {
-	.name		= "l3_s",
-	.class		= &am33xx_l3_hwmod_class,
-	.clkdm_name	= "l3s_clkdm",
-};
-
-/* l3_instr */
-static struct omap_hwmod am33xx_l3_instr_hwmod = {
-	.name		= "l3_instr",
-	.class		= &am33xx_l3_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'l4' class
- * instance(s): l4_ls, l4_hs, l4_wkup, l4_fw
- */
-static struct omap_hwmod_class am33xx_l4_hwmod_class = {
-	.name		= "l4",
-};
-
-/* l4_ls */
-static struct omap_hwmod am33xx_l4_ls_hwmod = {
-	.name		= "l4_ls",
-	.class		= &am33xx_l4_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
 /* l4_hs */
 static struct omap_hwmod am33xx_l4_hs_hwmod = {
 	.name		= "l4_hs",
 	.class		= &am33xx_l4_hwmod_class,
 	.clkdm_name	= "l4hs_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "l4hs_gclk",
 	.prcm		= {
 		.omap4	= {
@@ -144,50 +78,6 @@ static struct omap_hwmod am33xx_l4_hs_hwmod = {
 	},
 };
 
-
-/* l4_wkup */
-static struct omap_hwmod am33xx_l4_wkup_hwmod = {
-	.name		= "l4_wkup",
-	.class		= &am33xx_l4_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'mpu' class
- */
-static struct omap_hwmod_class am33xx_mpu_hwmod_class = {
-	.name	= "mpu",
-};
-
-static struct omap_hwmod am33xx_mpu_hwmod = {
-	.name		= "mpu",
-	.class		= &am33xx_mpu_hwmod_class,
-	.clkdm_name	= "mpu_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
-	.main_clk	= "dpll_mpu_m2_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'wakeup m3' class
- * Wakeup controller sub-system under wakeup domain
- */
-static struct omap_hwmod_class am33xx_wkup_m3_hwmod_class = {
-	.name		= "wkup_m3",
-};
-
 static struct omap_hwmod_rst_info am33xx_wkup_m3_resets[] = {
 	{ .name = "wkup_m3", .rst_shift = 3, .st_shift = 5 },
 };
@@ -213,78 +103,6 @@ static struct omap_hwmod am33xx_wkup_m3_hwmod = {
 };
 
 /*
- * 'pru-icss' class
- * Programmable Real-Time Unit and Industrial Communication Subsystem
- */
-static struct omap_hwmod_class am33xx_pruss_hwmod_class = {
-	.name	= "pruss",
-};
-
-static struct omap_hwmod_rst_info am33xx_pruss_resets[] = {
-	{ .name = "pruss", .rst_shift = 1 },
-};
-
-/* pru-icss */
-/* Pseudo hwmod for reset control purpose only */
-static struct omap_hwmod am33xx_pruss_hwmod = {
-	.name		= "pruss",
-	.class		= &am33xx_pruss_hwmod_class,
-	.clkdm_name	= "pruss_ocp_clkdm",
-	.main_clk	= "pruss_ocp_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_PRUSS_CLKCTRL_OFFSET,
-			.rstctrl_offs	= AM33XX_RM_PER_RSTCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.rst_lines	= am33xx_pruss_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(am33xx_pruss_resets),
-};
-
-/* gfx */
-/* Pseudo hwmod for reset control purpose only */
-static struct omap_hwmod_class am33xx_gfx_hwmod_class = {
-	.name	= "gfx",
-};
-
-static struct omap_hwmod_rst_info am33xx_gfx_resets[] = {
-	{ .name = "gfx", .rst_shift = 0, .st_shift = 0},
-};
-
-static struct omap_hwmod am33xx_gfx_hwmod = {
-	.name		= "gfx",
-	.class		= &am33xx_gfx_hwmod_class,
-	.clkdm_name	= "gfx_l3_clkdm",
-	.main_clk	= "gfx_fck_div_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_GFX_GFX_CLKCTRL_OFFSET,
-			.rstctrl_offs	= AM33XX_RM_GFX_RSTCTRL_OFFSET,
-			.rstst_offs	= AM33XX_RM_GFX_RSTST_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.rst_lines	= am33xx_gfx_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(am33xx_gfx_resets),
-};
-
-/*
- * 'prcm' class
- * power and reset manager (whole prcm infrastructure)
- */
-static struct omap_hwmod_class am33xx_prcm_hwmod_class = {
-	.name	= "prcm",
-};
-
-/* prcm */
-static struct omap_hwmod am33xx_prcm_hwmod = {
-	.name		= "prcm",
-	.class		= &am33xx_prcm_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-};
-
-/*
  * 'adc/tsc' class
  * TouchScreen Controller (Anolog-To-Digital Converter)
  */
@@ -325,7 +143,6 @@ static struct omap_hwmod am33xx_adc_tsc_hwmod = {
  *
  *    - cEFUSE (doesn't fall under any ocp_if)
  *    - clkdiv32k
- *    - debugss
  *    - ocp watch point
  */
 #if 0
@@ -369,27 +186,6 @@ static struct omap_hwmod am33xx_clkdiv32k_hwmod = {
 	},
 };
 
-/*
- * 'debugss' class
- * debug sub system
- */
-static struct omap_hwmod_class am33xx_debugss_hwmod_class = {
-	.name		= "debugss",
-};
-
-static struct omap_hwmod am33xx_debugss_hwmod = {
-	.name		= "debugss",
-	.class		= &am33xx_debugss_hwmod_class,
-	.clkdm_name	= "l3_aon_clkdm",
-	.main_clk	= "debugss_ick",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_WKUP_DEBUGSS_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
 /* ocpwp */
 static struct omap_hwmod_class am33xx_ocpwp_hwmod_class = {
 	.name		= "ocpwp",
@@ -410,123 +206,38 @@ static struct omap_hwmod am33xx_ocpwp_hwmod = {
 #endif
 
 /*
- * 'aes0' class
+ * 'debugss' class
+ * debug sub system
  */
-static struct omap_hwmod_class_sysconfig am33xx_aes0_sysc = {
-	.rev_offs	= 0x80,
-	.sysc_offs	= 0x84,
-	.syss_offs	= 0x88,
-	.sysc_flags	= SYSS_HAS_RESET_STATUS,
-};
-
-static struct omap_hwmod_class am33xx_aes0_hwmod_class = {
-	.name		= "aes0",
-	.sysc		= &am33xx_aes0_sysc,
-};
-
-static struct omap_hwmod am33xx_aes0_hwmod = {
-	.name		= "aes",
-	.class		= &am33xx_aes0_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.main_clk	= "aes0_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_AES0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* sha0 HIB2 (the 'P' (public) device) */
-static struct omap_hwmod_class_sysconfig am33xx_sha0_sysc = {
-	.rev_offs	= 0x100,
-	.sysc_offs	= 0x110,
-	.syss_offs	= 0x114,
-	.sysc_flags	= SYSS_HAS_RESET_STATUS,
-};
-
-static struct omap_hwmod_class am33xx_sha0_hwmod_class = {
-	.name		= "sha0",
-	.sysc		= &am33xx_sha0_sysc,
-};
-
-static struct omap_hwmod am33xx_sha0_hwmod = {
-	.name		= "sham",
-	.class		= &am33xx_sha0_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_SHA0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* ocmcram */
-static struct omap_hwmod_class am33xx_ocmcram_hwmod_class = {
-	.name = "ocmcram",
+static struct omap_hwmod_opt_clk debugss_opt_clks[] = {
+	{ .role = "dbg_sysclk", .clk = "dbg_sysclk_ck" },
+	{ .role = "dbg_clka", .clk = "dbg_clka_ck" },
 };
 
-static struct omap_hwmod am33xx_ocmcram_hwmod = {
-	.name		= "ocmcram",
-	.class		= &am33xx_ocmcram_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* 'smartreflex' class */
-static struct omap_hwmod_class am33xx_smartreflex_hwmod_class = {
-	.name		= "smartreflex",
-};
-
-/* smartreflex0 */
-static struct omap_hwmod am33xx_smartreflex0_hwmod = {
-	.name		= "smartreflex0",
-	.class		= &am33xx_smartreflex_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.main_clk	= "smartreflex0_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
+static struct omap_hwmod_class am33xx_debugss_hwmod_class = {
+	.name		= "debugss",
 };
 
-/* smartreflex1 */
-static struct omap_hwmod am33xx_smartreflex1_hwmod = {
-	.name		= "smartreflex1",
-	.class		= &am33xx_smartreflex_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.main_clk	= "smartreflex1_fck",
+static struct omap_hwmod am33xx_debugss_hwmod = {
+	.name		= "debugss",
+	.class		= &am33xx_debugss_hwmod_class,
+	.clkdm_name	= "l3_aon_clkdm",
+	.main_clk	= "trace_clk_div_ck",
 	.prcm		= {
 		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET,
+			.clkctrl_offs	= AM33XX_CM_WKUP_DEBUGSS_CLKCTRL_OFFSET,
 			.modulemode	= MODULEMODE_SWCTRL,
 		},
 	},
-};
-
-/*
- * 'control' module class
- */
-static struct omap_hwmod_class am33xx_control_hwmod_class = {
-	.name		= "control",
+	.opt_clks	= debugss_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(debugss_opt_clks),
 };
 
 static struct omap_hwmod am33xx_control_hwmod = {
 	.name		= "control",
 	.class		= &am33xx_control_hwmod_class,
 	.clkdm_name	= "l4_wkup_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "dpll_core_m4_div2_ck",
 	.prcm		= {
 		.omap4	= {
@@ -536,288 +247,6 @@ static struct omap_hwmod am33xx_control_hwmod = {
 	},
 };
 
-/*
- * 'cpgmac' class
- * cpsw/cpgmac sub system
- */
-static struct omap_hwmod_class_sysconfig am33xx_cpgmac_sysc = {
-	.rev_offs	= 0x0,
-	.sysc_offs	= 0x8,
-	.syss_offs	= 0x4,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
-			   SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | MSTANDBY_FORCE |
-			   MSTANDBY_NO),
-	.sysc_fields	= &omap_hwmod_sysc_type3,
-};
-
-static struct omap_hwmod_class am33xx_cpgmac0_hwmod_class = {
-	.name		= "cpgmac0",
-	.sysc		= &am33xx_cpgmac_sysc,
-};
-
-static struct omap_hwmod am33xx_cpgmac0_hwmod = {
-	.name		= "cpgmac0",
-	.class		= &am33xx_cpgmac0_hwmod_class,
-	.clkdm_name	= "cpsw_125mhz_clkdm",
-	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
-	.main_clk	= "cpsw_125mhz_gclk",
-	.mpu_rt_idx	= 1,
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * mdio class
- */
-static struct omap_hwmod_class am33xx_mdio_hwmod_class = {
-	.name		= "davinci_mdio",
-};
-
-static struct omap_hwmod am33xx_mdio_hwmod = {
-	.name		= "davinci_mdio",
-	.class		= &am33xx_mdio_hwmod_class,
-	.clkdm_name	= "cpsw_125mhz_clkdm",
-	.main_clk	= "cpsw_125mhz_gclk",
-};
-
-/*
- * dcan class
- */
-static struct omap_hwmod_class am33xx_dcan_hwmod_class = {
-	.name = "d_can",
-};
-
-/* dcan0 */
-static struct omap_hwmod am33xx_dcan0_hwmod = {
-	.name		= "d_can0",
-	.class		= &am33xx_dcan_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "dcan0_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_DCAN0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* dcan1 */
-static struct omap_hwmod am33xx_dcan1_hwmod = {
-	.name		= "d_can1",
-	.class		= &am33xx_dcan_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "dcan1_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_DCAN1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* elm */
-static struct omap_hwmod_class_sysconfig am33xx_elm_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
-			SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
-			SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_elm_hwmod_class = {
-	.name		= "elm",
-	.sysc		= &am33xx_elm_sysc,
-};
-
-static struct omap_hwmod am33xx_elm_hwmod = {
-	.name		= "elm",
-	.class		= &am33xx_elm_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_ELM_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* pwmss  */
-static struct omap_hwmod_class_sysconfig am33xx_epwmss_sysc = {
-	.rev_offs	= 0x0,
-	.sysc_offs	= 0x4,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
-			MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class am33xx_epwmss_hwmod_class = {
-	.name		= "epwmss",
-	.sysc		= &am33xx_epwmss_sysc,
-};
-
-static struct omap_hwmod_class am33xx_ecap_hwmod_class = {
-	.name		= "ecap",
-};
-
-static struct omap_hwmod_class am33xx_eqep_hwmod_class = {
-	.name		= "eqep",
-};
-
-static struct omap_hwmod_class am33xx_ehrpwm_hwmod_class = {
-	.name		= "ehrpwm",
-};
-
-/* epwmss0 */
-static struct omap_hwmod am33xx_epwmss0_hwmod = {
-	.name		= "epwmss0",
-	.class		= &am33xx_epwmss_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* ecap0 */
-static struct omap_hwmod am33xx_ecap0_hwmod = {
-	.name		= "ecap0",
-	.class		= &am33xx_ecap_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* eqep0 */
-static struct omap_hwmod am33xx_eqep0_hwmod = {
-	.name		= "eqep0",
-	.class		= &am33xx_eqep_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* ehrpwm0 */
-static struct omap_hwmod am33xx_ehrpwm0_hwmod = {
-	.name		= "ehrpwm0",
-	.class		= &am33xx_ehrpwm_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* epwmss1 */
-static struct omap_hwmod am33xx_epwmss1_hwmod = {
-	.name		= "epwmss1",
-	.class		= &am33xx_epwmss_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* ecap1 */
-static struct omap_hwmod am33xx_ecap1_hwmod = {
-	.name		= "ecap1",
-	.class		= &am33xx_ecap_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* eqep1 */
-static struct omap_hwmod am33xx_eqep1_hwmod = {
-	.name		= "eqep1",
-	.class		= &am33xx_eqep_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* ehrpwm1 */
-static struct omap_hwmod am33xx_ehrpwm1_hwmod = {
-	.name		= "ehrpwm1",
-	.class		= &am33xx_ehrpwm_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* epwmss2 */
-static struct omap_hwmod am33xx_epwmss2_hwmod = {
-	.name		= "epwmss2",
-	.class		= &am33xx_epwmss_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* ecap2 */
-static struct omap_hwmod am33xx_ecap2_hwmod = {
-	.name		= "ecap2",
-	.class		= &am33xx_ecap_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* eqep2 */
-static struct omap_hwmod am33xx_eqep2_hwmod = {
-	.name		= "eqep2",
-	.class		= &am33xx_eqep_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/* ehrpwm2 */
-static struct omap_hwmod am33xx_ehrpwm2_hwmod = {
-	.name		= "ehrpwm2",
-	.class		= &am33xx_ehrpwm_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-};
-
-/*
- * 'gpio' class: for gpio 0,1,2,3
- */
-static struct omap_hwmod_class_sysconfig am33xx_gpio_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0114,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
-			  SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			  SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			  SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_gpio_hwmod_class = {
-	.name		= "gpio",
-	.sysc		= &am33xx_gpio_sysc,
-	.rev		= 2,
-};
-
-static struct omap_gpio_dev_attr gpio_dev_attr = {
-	.bank_width	= 32,
-	.dbck_flag	= true,
-};
-
 /* gpio0 */
 static struct omap_hwmod_opt_clk gpio0_opt_clks[] = {
 	{ .role = "dbclk", .clk = "gpio0_dbclk" },
@@ -840,174 +269,6 @@ static struct omap_hwmod am33xx_gpio0_hwmod = {
 	.dev_attr	= &gpio_dev_attr,
 };
 
-/* gpio1 */
-static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
-	{ .role = "dbclk", .clk = "gpio1_dbclk" },
-};
-
-static struct omap_hwmod am33xx_gpio1_hwmod = {
-	.name		= "gpio2",
-	.class		= &am33xx_gpio_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_GPIO1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.opt_clks	= gpio1_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(gpio1_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* gpio2 */
-static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
-	{ .role = "dbclk", .clk = "gpio2_dbclk" },
-};
-
-static struct omap_hwmod am33xx_gpio2_hwmod = {
-	.name		= "gpio3",
-	.class		= &am33xx_gpio_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_GPIO2_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.opt_clks	= gpio2_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(gpio2_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* gpio3 */
-static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
-	{ .role = "dbclk", .clk = "gpio3_dbclk" },
-};
-
-static struct omap_hwmod am33xx_gpio3_hwmod = {
-	.name		= "gpio4",
-	.class		= &am33xx_gpio_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_GPIO3_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.opt_clks	= gpio3_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(gpio3_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* gpmc */
-static struct omap_hwmod_class_sysconfig gpmc_sysc = {
-	.rev_offs	= 0x0,
-	.sysc_offs	= 0x10,
-	.syss_offs	= 0x14,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
-			SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_gpmc_hwmod_class = {
-	.name		= "gpmc",
-	.sysc		= &gpmc_sysc,
-};
-
-static struct omap_hwmod am33xx_gpmc_hwmod = {
-	.name		= "gpmc",
-	.class		= &am33xx_gpmc_hwmod_class,
-	.clkdm_name	= "l3s_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
-	.main_clk	= "l3s_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* 'i2c' class */
-static struct omap_hwmod_class_sysconfig am33xx_i2c_sysc = {
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0090,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			  SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
-			  SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			  SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class i2c_class = {
-	.name		= "i2c",
-	.sysc		= &am33xx_i2c_sysc,
-	.rev		= OMAP_I2C_IP_VERSION_2,
-	.reset		= &omap_i2c_reset,
-};
-
-static struct omap_i2c_dev_attr i2c_dev_attr = {
-	.flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE,
-};
-
-/* i2c1 */
-static struct omap_hwmod am33xx_i2c1_hwmod = {
-	.name		= "i2c1",
-	.class		= &i2c_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
-	.main_clk	= "dpll_per_m2_div4_wkupdm_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &i2c_dev_attr,
-};
-
-/* i2c1 */
-static struct omap_hwmod am33xx_i2c2_hwmod = {
-	.name		= "i2c2",
-	.class		= &i2c_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4 = {
-			.clkctrl_offs	= AM33XX_CM_PER_I2C1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &i2c_dev_attr,
-};
-
-/* i2c3 */
-static struct omap_hwmod am33xx_i2c3_hwmod = {
-	.name		= "i2c3",
-	.class		= &i2c_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_I2C2_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &i2c_dev_attr,
-};
-
-
 /* lcdc */
 static struct omap_hwmod_class_sysconfig lcdc_sysc = {
 	.rev_offs	= 0x0,
@@ -1037,600 +298,6 @@ static struct omap_hwmod am33xx_lcdc_hwmod = {
 };
 
 /*
- * 'mailbox' class
- * mailbox module allowing communication between the on-chip processors using a
- * queued mailbox-interrupt mechanism.
- */
-static struct omap_hwmod_class_sysconfig am33xx_mailbox_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
-			  SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class am33xx_mailbox_hwmod_class = {
-	.name	= "mailbox",
-	.sysc	= &am33xx_mailbox_sysc,
-};
-
-static struct omap_hwmod am33xx_mailbox_hwmod = {
-	.name		= "mailbox",
-	.class		= &am33xx_mailbox_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs	= AM33XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'mcasp' class
- */
-static struct omap_hwmod_class_sysconfig am33xx_mcasp_sysc = {
-	.rev_offs	= 0x0,
-	.sysc_offs	= 0x4,
-	.sysc_flags	= SYSC_HAS_SIDLEMODE,
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type3,
-};
-
-static struct omap_hwmod_class am33xx_mcasp_hwmod_class = {
-	.name		= "mcasp",
-	.sysc		= &am33xx_mcasp_sysc,
-};
-
-/* mcasp0 */
-static struct omap_hwmod am33xx_mcasp0_hwmod = {
-	.name		= "mcasp0",
-	.class		= &am33xx_mcasp_hwmod_class,
-	.clkdm_name	= "l3s_clkdm",
-	.main_clk	= "mcasp0_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_MCASP0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* mcasp1 */
-static struct omap_hwmod am33xx_mcasp1_hwmod = {
-	.name		= "mcasp1",
-	.class		= &am33xx_mcasp_hwmod_class,
-	.clkdm_name	= "l3s_clkdm",
-	.main_clk	= "mcasp1_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_MCASP1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* 'mmc' class */
-static struct omap_hwmod_class_sysconfig am33xx_mmc_sysc = {
-	.rev_offs	= 0x1fc,
-	.sysc_offs	= 0x10,
-	.syss_offs	= 0x14,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
-			  SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-			  SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_mmc_hwmod_class = {
-	.name		= "mmc",
-	.sysc		= &am33xx_mmc_sysc,
-};
-
-/* mmc0 */
-static struct omap_mmc_dev_attr am33xx_mmc0_dev_attr = {
-	.flags		= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
-};
-
-static struct omap_hwmod am33xx_mmc0_hwmod = {
-	.name		= "mmc1",
-	.class		= &am33xx_mmc_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "mmc_clk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_MMC0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &am33xx_mmc0_dev_attr,
-};
-
-/* mmc1 */
-static struct omap_mmc_dev_attr am33xx_mmc1_dev_attr = {
-	.flags		= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
-};
-
-static struct omap_hwmod am33xx_mmc1_hwmod = {
-	.name		= "mmc2",
-	.class		= &am33xx_mmc_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "mmc_clk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_MMC1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &am33xx_mmc1_dev_attr,
-};
-
-/* mmc2 */
-static struct omap_mmc_dev_attr am33xx_mmc2_dev_attr = {
-	.flags		= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
-};
-static struct omap_hwmod am33xx_mmc2_hwmod = {
-	.name		= "mmc3",
-	.class		= &am33xx_mmc_hwmod_class,
-	.clkdm_name	= "l3s_clkdm",
-	.main_clk	= "mmc_clk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &am33xx_mmc2_dev_attr,
-};
-
-/*
- * 'rtc' class
- * rtc subsystem
- */
-static struct omap_hwmod_class_sysconfig am33xx_rtc_sysc = {
-	.rev_offs	= 0x0074,
-	.sysc_offs	= 0x0078,
-	.sysc_flags	= SYSC_HAS_SIDLEMODE,
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO |
-			  SIDLE_SMART | SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type3,
-};
-
-static struct omap_hwmod_class am33xx_rtc_hwmod_class = {
-	.name		= "rtc",
-	.sysc		= &am33xx_rtc_sysc,
-};
-
-static struct omap_hwmod am33xx_rtc_hwmod = {
-	.name		= "rtc",
-	.class		= &am33xx_rtc_hwmod_class,
-	.clkdm_name	= "l4_rtc_clkdm",
-	.main_clk	= "clk_32768_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* 'spi' class */
-static struct omap_hwmod_class_sysconfig am33xx_mcspi_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0110,
-	.syss_offs	= 0x0114,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
-			  SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
-			  SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_spi_hwmod_class = {
-	.name		= "mcspi",
-	.sysc		= &am33xx_mcspi_sysc,
-	.rev		= OMAP4_MCSPI_REV,
-};
-
-/* spi0 */
-static struct omap2_mcspi_dev_attr mcspi_attrib = {
-	.num_chipselect	= 2,
-};
-static struct omap_hwmod am33xx_spi0_hwmod = {
-	.name		= "spi0",
-	.class		= &am33xx_spi_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_SPI0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &mcspi_attrib,
-};
-
-/* spi1 */
-static struct omap_hwmod am33xx_spi1_hwmod = {
-	.name		= "spi1",
-	.class		= &am33xx_spi_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_SPI1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &mcspi_attrib,
-};
-
-/*
- * 'spinlock' class
- * spinlock provides hardware assistance for synchronizing the
- * processes running on multiple processors
- */
-static struct omap_hwmod_class am33xx_spinlock_hwmod_class = {
-	.name		= "spinlock",
-};
-
-static struct omap_hwmod am33xx_spinlock_hwmod = {
-	.name		= "spinlock",
-	.class		= &am33xx_spinlock_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "l4ls_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* 'timer 2-7' class */
-static struct omap_hwmod_class_sysconfig am33xx_timer_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			  SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class am33xx_timer_hwmod_class = {
-	.name		= "timer",
-	.sysc		= &am33xx_timer_sysc,
-};
-
-/* timer1 1ms */
-static struct omap_hwmod_class_sysconfig am33xx_timer1ms_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
-			SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
-			SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_timer1ms_hwmod_class = {
-	.name		= "timer",
-	.sysc		= &am33xx_timer1ms_sysc,
-};
-
-static struct omap_hwmod am33xx_timer1_hwmod = {
-	.name		= "timer1",
-	.class		= &am33xx_timer1ms_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.main_clk	= "timer1_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_timer2_hwmod = {
-	.name		= "timer2",
-	.class		= &am33xx_timer_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "timer2_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TIMER2_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_timer3_hwmod = {
-	.name		= "timer3",
-	.class		= &am33xx_timer_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "timer3_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TIMER3_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_timer4_hwmod = {
-	.name		= "timer4",
-	.class		= &am33xx_timer_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "timer4_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TIMER4_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_timer5_hwmod = {
-	.name		= "timer5",
-	.class		= &am33xx_timer_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "timer5_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TIMER5_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_timer6_hwmod = {
-	.name		= "timer6",
-	.class		= &am33xx_timer_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "timer6_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TIMER6_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_timer7_hwmod = {
-	.name		= "timer7",
-	.class		= &am33xx_timer_hwmod_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.main_clk	= "timer7_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TIMER7_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* tpcc */
-static struct omap_hwmod_class am33xx_tpcc_hwmod_class = {
-	.name		= "tpcc",
-};
-
-static struct omap_hwmod am33xx_tpcc_hwmod = {
-	.name		= "tpcc",
-	.class		= &am33xx_tpcc_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TPCC_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod_class_sysconfig am33xx_tptc_sysc = {
-	.rev_offs	= 0x0,
-	.sysc_offs	= 0x10,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			  SYSC_HAS_MIDLEMODE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_SMART | MSTANDBY_FORCE),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-/* 'tptc' class */
-static struct omap_hwmod_class am33xx_tptc_hwmod_class = {
-	.name		= "tptc",
-	.sysc		= &am33xx_tptc_sysc,
-};
-
-/* tptc0 */
-static struct omap_hwmod am33xx_tptc0_hwmod = {
-	.name		= "tptc0",
-	.class		= &am33xx_tptc_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TPTC0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* tptc1 */
-static struct omap_hwmod am33xx_tptc1_hwmod = {
-	.name		= "tptc1",
-	.class		= &am33xx_tptc_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TPTC1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* tptc2 */
-static struct omap_hwmod am33xx_tptc2_hwmod = {
-	.name		= "tptc2",
-	.class		= &am33xx_tptc_hwmod_class,
-	.clkdm_name	= "l3_clkdm",
-	.flags		= (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
-	.main_clk	= "l3_gclk",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_TPTC2_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* 'uart' class */
-static struct omap_hwmod_class_sysconfig uart_sysc = {
-	.rev_offs	= 0x50,
-	.sysc_offs	= 0x54,
-	.syss_offs	= 0x58,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
-			  SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			  SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class uart_class = {
-	.name		= "uart",
-	.sysc		= &uart_sysc,
-};
-
-/* uart1 */
-static struct omap_hwmod am33xx_uart1_hwmod = {
-	.name		= "uart1",
-	.class		= &uart_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.flags		= DEBUG_AM33XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
-	.main_clk	= "dpll_per_m2_div4_wkupdm_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_WKUP_UART0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_uart2_hwmod = {
-	.name		= "uart2",
-	.class		= &uart_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_UART1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* uart3 */
-static struct omap_hwmod am33xx_uart3_hwmod = {
-	.name		= "uart3",
-	.class		= &uart_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_UART2_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_uart4_hwmod = {
-	.name		= "uart4",
-	.class		= &uart_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_UART3_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_uart5_hwmod = {
-	.name		= "uart5",
-	.class		= &uart_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_UART4_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am33xx_uart6_hwmod = {
-	.name		= "uart6",
-	.class		= &uart_class,
-	.clkdm_name	= "l4ls_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
-	.main_clk	= "dpll_per_m2_div4_ck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_PER_UART5_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* 'wd_timer' class */
-static struct omap_hwmod_class_sysconfig wdt_sysc = {
-	.rev_offs	= 0x0,
-	.sysc_offs	= 0x10,
-	.syss_offs	= 0x14,
-	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE |
-			SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class am33xx_wd_timer_hwmod_class = {
-	.name		= "wd_timer",
-	.sysc		= &wdt_sysc,
-	.pre_shutdown	= &omap2_wd_timer_disable,
-};
-
-/*
- * XXX: device.c file uses hardcoded name for watchdog timer
- * driver "wd_timer2, so we are also using same name as of now...
- */
-static struct omap_hwmod am33xx_wd_timer1_hwmod = {
-	.name		= "wd_timer2",
-	.class		= &am33xx_wd_timer_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE,
-	.main_clk	= "wdt1_fck",
-	.prcm		= {
-		.omap4	= {
-			.clkctrl_offs	= AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
  * 'usb_otg' class
  * high-speed on-the-go universal serial bus (usb_otg) controller
  */
@@ -1684,14 +351,6 @@ static struct omap_hwmod_ocp_if am33xx_l3_main__emif = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* mpu -> l3 main */
-static struct omap_hwmod_ocp_if am33xx_mpu__l3_main = {
-	.master		= &am33xx_mpu_hwmod,
-	.slave		= &am33xx_l3_main_hwmod,
-	.clk		= "dpll_mpu_m2_ck",
-	.user		= OCP_USER_MPU,
-};
-
 /* l3 main -> l4 hs */
 static struct omap_hwmod_ocp_if am33xx_l3_main__l4_hs = {
 	.master		= &am33xx_l3_main_hwmod,
@@ -1700,62 +359,6 @@ static struct omap_hwmod_ocp_if am33xx_l3_main__l4_hs = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3 main -> l3 s */
-static struct omap_hwmod_ocp_if am33xx_l3_main__l3_s = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_l3_s_hwmod,
-	.clk		= "l3s_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3 s -> l4 per/ls */
-static struct omap_hwmod_ocp_if am33xx_l3_s__l4_ls = {
-	.master		= &am33xx_l3_s_hwmod,
-	.slave		= &am33xx_l4_ls_hwmod,
-	.clk		= "l3s_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3 s -> l4 wkup */
-static struct omap_hwmod_ocp_if am33xx_l3_s__l4_wkup = {
-	.master		= &am33xx_l3_s_hwmod,
-	.slave		= &am33xx_l4_wkup_hwmod,
-	.clk		= "l3s_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3 main -> l3 instr */
-static struct omap_hwmod_ocp_if am33xx_l3_main__l3_instr = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_l3_instr_hwmod,
-	.clk		= "l3s_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu -> prcm */
-static struct omap_hwmod_ocp_if am33xx_mpu__prcm = {
-	.master		= &am33xx_mpu_hwmod,
-	.slave		= &am33xx_prcm_hwmod,
-	.clk		= "dpll_mpu_m2_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3 s -> l3 main*/
-static struct omap_hwmod_ocp_if am33xx_l3_s__l3_main = {
-	.master		= &am33xx_l3_s_hwmod,
-	.slave		= &am33xx_l3_main_hwmod,
-	.clk		= "l3s_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* pru-icss -> l3 main */
-static struct omap_hwmod_ocp_if am33xx_pruss__l3_main = {
-	.master		= &am33xx_pruss_hwmod,
-	.slave		= &am33xx_l3_main_hwmod,
-	.clk		= "l3_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* wkup m3 -> l4 wkup */
 static struct omap_hwmod_ocp_if am33xx_wkup_m3__l4_wkup = {
 	.master		= &am33xx_wkup_m3_hwmod,
@@ -1764,14 +367,6 @@ static struct omap_hwmod_ocp_if am33xx_wkup_m3__l4_wkup = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* gfx -> l3 main */
-static struct omap_hwmod_ocp_if am33xx_gfx__l3_main = {
-	.master		= &am33xx_gfx_hwmod,
-	.slave		= &am33xx_l3_main_hwmod,
-	.clk		= "dpll_core_m4_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l4 wkup -> wkup m3 */
 static struct omap_hwmod_ocp_if am33xx_l4_wkup__wkup_m3 = {
 	.master		= &am33xx_l4_wkup_hwmod,
@@ -1788,12 +383,22 @@ static struct omap_hwmod_ocp_if am33xx_l4_hs__pruss = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3 main -> gfx */
-static struct omap_hwmod_ocp_if am33xx_l3_main__gfx = {
+/* l3_main -> debugss */
+static struct omap_hwmod_addr_space am33xx_debugss_addrs[] = {
+	{
+		.pa_start	= 0x4b000000,
+		.pa_end		= 0x4b000000 + SZ_16M - 1,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if am33xx_l3_main__debugss = {
 	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_gfx_hwmod,
+	.slave		= &am33xx_debugss_hwmod,
 	.clk		= "dpll_core_m4_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+	.addr		= am33xx_debugss_addrs,
+	.user		= OCP_USER_MPU,
 };
 
 /* l4 wkup -> smartreflex0 */
@@ -1820,54 +425,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__control = {
 	.user		= OCP_USER_MPU,
 };
 
-/* l4 wkup -> rtc */
-static struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc = {
-	.master		= &am33xx_l4_wkup_hwmod,
-	.slave		= &am33xx_rtc_hwmod,
-	.clk		= "clkdiv32k_ick",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 per/ls -> DCAN0 */
-static struct omap_hwmod_ocp_if am33xx_l4_per__dcan0 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_dcan0_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 per/ls -> DCAN1 */
-static struct omap_hwmod_ocp_if am33xx_l4_per__dcan1 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_dcan1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 per/ls -> GPIO2 */
-static struct omap_hwmod_ocp_if am33xx_l4_per__gpio1 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_gpio1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 per/ls -> gpio3 */
-static struct omap_hwmod_ocp_if am33xx_l4_per__gpio2 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_gpio2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 per/ls -> gpio4 */
-static struct omap_hwmod_ocp_if am33xx_l4_per__gpio3 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_gpio3_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* L4 WKUP -> I2C1 */
 static struct omap_hwmod_ocp_if am33xx_l4_wkup__i2c1 = {
 	.master		= &am33xx_l4_wkup_hwmod,
@@ -1909,177 +466,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_hs__cpgmac0 = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = {
-	.master		= &am33xx_cpgmac0_hwmod,
-	.slave		= &am33xx_mdio_hwmod,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space am33xx_elm_addr_space[] = {
-	{
-		.pa_start	= 0x48080000,
-		.pa_end		= 0x48080000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_ls__elm = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_elm_hwmod,
-	.clk		= "l4ls_gclk",
-	.addr		= am33xx_elm_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space am33xx_epwmss0_addr_space[] = {
-	{
-		.pa_start	= 0x48300000,
-		.pa_end		= 0x48300000 + SZ_16 - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_epwmss0_hwmod,
-	.clk		= "l4ls_gclk",
-	.addr		= am33xx_epwmss0_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_epwmss0__ecap0 = {
-	.master		= &am33xx_epwmss0_hwmod,
-	.slave		= &am33xx_ecap0_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_epwmss0__eqep0 = {
-	.master		= &am33xx_epwmss0_hwmod,
-	.slave		= &am33xx_eqep0_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_epwmss0__ehrpwm0 = {
-	.master		= &am33xx_epwmss0_hwmod,
-	.slave		= &am33xx_ehrpwm0_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-
-static struct omap_hwmod_addr_space am33xx_epwmss1_addr_space[] = {
-	{
-		.pa_start	= 0x48302000,
-		.pa_end		= 0x48302000 + SZ_16 - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_epwmss1_hwmod,
-	.clk		= "l4ls_gclk",
-	.addr		= am33xx_epwmss1_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_epwmss1__ecap1 = {
-	.master		= &am33xx_epwmss1_hwmod,
-	.slave		= &am33xx_ecap1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_epwmss1__eqep1 = {
-	.master		= &am33xx_epwmss1_hwmod,
-	.slave		= &am33xx_eqep1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_epwmss1__ehrpwm1 = {
-	.master		= &am33xx_epwmss1_hwmod,
-	.slave		= &am33xx_ehrpwm1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space am33xx_epwmss2_addr_space[] = {
-	{
-		.pa_start	= 0x48304000,
-		.pa_end		= 0x48304000 + SZ_16 - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_epwmss2_hwmod,
-	.clk		= "l4ls_gclk",
-	.addr		= am33xx_epwmss2_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_epwmss2__ecap2 = {
-	.master		= &am33xx_epwmss2_hwmod,
-	.slave		= &am33xx_ecap2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_epwmss2__eqep2 = {
-	.master		= &am33xx_epwmss2_hwmod,
-	.slave		= &am33xx_eqep2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2 = {
-	.master		= &am33xx_epwmss2_hwmod,
-	.slave		= &am33xx_ehrpwm2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3s cfg -> gpmc */
-static struct omap_hwmod_addr_space am33xx_gpmc_addr_space[] = {
-	{
-		.pa_start	= 0x50000000,
-		.pa_end		= 0x50000000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = {
-	.master		= &am33xx_l3_s_hwmod,
-	.slave		= &am33xx_gpmc_hwmod,
-	.clk		= "l3s_gclk",
-	.addr		= am33xx_gpmc_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/* i2c2 */
-static struct omap_hwmod_ocp_if am33xx_l4_per__i2c2 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_i2c2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_per__i2c3 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_i2c3_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 static struct omap_hwmod_addr_space am33xx_lcdc_addr_space[] = {
 	{
 		.pa_start	= 0x4830E000,
@@ -2097,138 +483,6 @@ static struct omap_hwmod_ocp_if am33xx_l3_main__lcdc = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_addr_space am33xx_mailbox_addrs[] = {
-	{
-		.pa_start	= 0x480C8000,
-		.pa_end		= 0x480C8000 + (SZ_4K - 1),
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4 ls -> mailbox */
-static struct omap_hwmod_ocp_if am33xx_l4_per__mailbox = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_mailbox_hwmod,
-	.clk		= "l4ls_gclk",
-	.addr		= am33xx_mailbox_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> spinlock */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__spinlock = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_spinlock_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> mcasp0 */
-static struct omap_hwmod_addr_space am33xx_mcasp0_addr_space[] = {
-	{
-		.pa_start	= 0x48038000,
-		.pa_end		= 0x48038000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp0 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_mcasp0_hwmod,
-	.clk		= "l4ls_gclk",
-	.addr		= am33xx_mcasp0_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> mcasp1 */
-static struct omap_hwmod_addr_space am33xx_mcasp1_addr_space[] = {
-	{
-		.pa_start	= 0x4803C000,
-		.pa_end		= 0x4803C000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_ls__mcasp1 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_mcasp1_hwmod,
-	.clk		= "l4ls_gclk",
-	.addr		= am33xx_mcasp1_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> mmc0 */
-static struct omap_hwmod_addr_space am33xx_mmc0_addr_space[] = {
-	{
-		.pa_start	= 0x48060100,
-		.pa_end		= 0x48060100 + SZ_4K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_ls__mmc0 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_mmc0_hwmod,
-	.clk		= "l4ls_gclk",
-	.addr		= am33xx_mmc0_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> mmc1 */
-static struct omap_hwmod_addr_space am33xx_mmc1_addr_space[] = {
-	{
-		.pa_start	= 0x481d8100,
-		.pa_end		= 0x481d8100 + SZ_4K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l4_ls__mmc1 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_mmc1_hwmod,
-	.clk		= "l4ls_gclk",
-	.addr		= am33xx_mmc1_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/* l3 s -> mmc2 */
-static struct omap_hwmod_addr_space am33xx_mmc2_addr_space[] = {
-	{
-		.pa_start	= 0x47810100,
-		.pa_end		= 0x47810100 + SZ_64K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l3_s__mmc2 = {
-	.master		= &am33xx_l3_s_hwmod,
-	.slave		= &am33xx_mmc2_hwmod,
-	.clk		= "l3s_gclk",
-	.addr		= am33xx_mmc2_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> mcspi0 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi0 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_spi0_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> mcspi1 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__mcspi1 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_spi1_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 /* l4 wkup -> timer1 */
 static struct omap_hwmod_ocp_if am33xx_l4_wkup__timer1 = {
 	.master		= &am33xx_l4_wkup_hwmod,
@@ -2237,116 +491,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__timer1 = {
 	.user		= OCP_USER_MPU,
 };
 
-/* l4 per -> timer2 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__timer2 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_timer2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 per -> timer3 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__timer3 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_timer3_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 per -> timer4 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__timer4 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_timer4_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 per -> timer5 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__timer5 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_timer5_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 per -> timer6 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__timer6 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_timer6_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 per -> timer7 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__timer7 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_timer7_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3 main -> tpcc */
-static struct omap_hwmod_ocp_if am33xx_l3_main__tpcc = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_tpcc_hwmod,
-	.clk		= "l3_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3 main -> tpcc0 */
-static struct omap_hwmod_addr_space am33xx_tptc0_addr_space[] = {
-	{
-		.pa_start	= 0x49800000,
-		.pa_end		= 0x49800000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l3_main__tptc0 = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_tptc0_hwmod,
-	.clk		= "l3_gclk",
-	.addr		= am33xx_tptc0_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/* l3 main -> tpcc1 */
-static struct omap_hwmod_addr_space am33xx_tptc1_addr_space[] = {
-	{
-		.pa_start	= 0x49900000,
-		.pa_end		= 0x49900000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l3_main__tptc1 = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_tptc1_hwmod,
-	.clk		= "l3_gclk",
-	.addr		= am33xx_tptc1_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/* l3 main -> tpcc2 */
-static struct omap_hwmod_addr_space am33xx_tptc2_addr_space[] = {
-	{
-		.pa_start	= 0x49a00000,
-		.pa_end		= 0x49a00000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if am33xx_l3_main__tptc2 = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_tptc2_hwmod,
-	.clk		= "l3_gclk",
-	.addr		= am33xx_tptc2_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
 /* l4 wkup -> uart1 */
 static struct omap_hwmod_ocp_if am33xx_l4_wkup__uart1 = {
 	.master		= &am33xx_l4_wkup_hwmod,
@@ -2355,46 +499,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__uart1 = {
 	.user		= OCP_USER_MPU,
 };
 
-/* l4 ls -> uart2 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__uart2 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_uart2_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> uart3 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__uart3 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_uart3_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> uart4 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__uart4 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_uart4_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> uart5 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__uart5 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_uart5_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4 ls -> uart6 */
-static struct omap_hwmod_ocp_if am33xx_l4_ls__uart6 = {
-	.master		= &am33xx_l4_ls_hwmod,
-	.slave		= &am33xx_uart6_hwmod,
-	.clk		= "l4ls_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 /* l4 wkup -> wd_timer1 */
 static struct omap_hwmod_ocp_if am33xx_l4_wkup__wd_timer1 = {
 	.master		= &am33xx_l4_wkup_hwmod,
@@ -2413,47 +517,39 @@ static struct omap_hwmod_ocp_if am33xx_l3_s__usbss = {
 	.flags		= OCPIF_SWSUP_IDLE,
 };
 
-/* l3 main -> ocmc */
-static struct omap_hwmod_ocp_if am33xx_l3_main__ocmc = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_ocmcram_hwmod,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3 main -> sha0 HIB2 */
-static struct omap_hwmod_addr_space am33xx_sha0_addrs[] = {
-	{
-		.pa_start	= 0x53100000,
-		.pa_end		= 0x53100000 + SZ_512 - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
+/* rng */
+static struct omap_hwmod_class_sysconfig am33xx_rng_sysc = {
+	.rev_offs	= 0x1fe0,
+	.sysc_offs	= 0x1fe4,
+	.sysc_flags	= SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE,
+	.idlemodes	= SIDLE_FORCE | SIDLE_NO,
+	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
-static struct omap_hwmod_ocp_if am33xx_l3_main__sha0 = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_sha0_hwmod,
-	.clk		= "sha0_fck",
-	.addr		= am33xx_sha0_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod_class am33xx_rng_hwmod_class = {
+	.name		= "rng",
+	.sysc		= &am33xx_rng_sysc,
 };
 
-/* l3 main -> AES0 HIB2 */
-static struct omap_hwmod_addr_space am33xx_aes0_addrs[] = {
-	{
-		.pa_start	= 0x53500000,
-		.pa_end		= 0x53500000 + SZ_1M - 1,
-		.flags		= ADDR_TYPE_RT
+static struct omap_hwmod am33xx_rng_hwmod = {
+	.name		= "rng",
+	.class		= &am33xx_rng_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE,
+	.main_clk	= "rng_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_RNG_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
 	},
-	{ }
 };
 
-static struct omap_hwmod_ocp_if am33xx_l3_main__aes0 = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_aes0_hwmod,
-	.clk		= "aes0_fck",
-	.addr		= am33xx_aes0_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod_ocp_if am33xx_l4_per__rng = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_rng_hwmod,
+	.clk		= "rng_fck",
+	.user		= OCP_USER_MPU,
 };
 
 static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
@@ -2470,6 +566,7 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_pruss__l3_main,
 	&am33xx_wkup_m3__l4_wkup,
 	&am33xx_gfx__l3_main,
+	&am33xx_l3_main__debugss,
 	&am33xx_l4_wkup__wkup_m3,
 	&am33xx_l4_wkup__control,
 	&am33xx_l4_wkup__smartreflex0,
@@ -2534,11 +631,13 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_cpgmac0__mdio,
 	&am33xx_l3_main__sha0,
 	&am33xx_l3_main__aes0,
+	&am33xx_l4_per__rng,
 	NULL,
 };
 
 int __init am33xx_hwmod_init(void)
 {
+	omap_hwmod_am33xx_reg();
 	omap_hwmod_init();
 	return omap_hwmod_register_links(am33xx_hwmod_ocp_ifs);
 }
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 0c3a427..9e56fab 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -3693,6 +3693,53 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__aes = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/*
+ * 'ssi' class
+ * synchronous serial interface (multichannel and full-duplex serial if)
+ */
+
+static struct omap_hwmod_class_sysconfig omap34xx_ssi_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_EMUFREE |
+			   SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap34xx_ssi_hwmod_class = {
+	.name	= "ssi",
+	.sysc	= &omap34xx_ssi_sysc,
+};
+
+static struct omap_hwmod omap34xx_ssi_hwmod = {
+	.name		= "ssi",
+	.class		= &omap34xx_ssi_hwmod_class,
+	.clkdm_name	= "core_l4_clkdm",
+	.main_clk	= "ssi_ssr_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id		= 1,
+			.module_bit		= OMAP3430_EN_SSI_SHIFT,
+			.module_offs		= CORE_MOD,
+			.idlest_reg_id		= 1,
+			.idlest_idle_bit	= OMAP3430ES2_ST_SSI_IDLE_SHIFT,
+		},
+	},
+};
+
+/* L4 CORE -> SSI */
+static struct omap_hwmod_ocp_if omap34xx_l4_core__ssi = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap34xx_ssi_hwmod,
+	.clk		= "ssi_ick",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l3_main__l4_core,
 	&omap3xxx_l3_main__l4_per,
@@ -3818,6 +3865,7 @@ static struct omap_hwmod_ocp_if *omap34xx_hwmod_ocp_ifs[] __initdata = {
 #ifdef CONFIG_OMAP_IOMMU_IVA2
 	&omap3xxx_l3_main__mmu_iva,
 #endif
+	&omap34xx_l4_core__ssi,
 	NULL
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
new file mode 100644
index 0000000..9002fca
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -0,0 +1,758 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated
+ *
+ * Hwmod present only in AM43x and those that differ other than register
+ * offsets as compared to AM335x.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+#include "omap_hwmod.h"
+#include "omap_hwmod_33xx_43xx_common_data.h"
+#include "prcm43xx.h"
+
+/* IP blocks */
+static struct omap_hwmod am43xx_l4_hs_hwmod = {
+	.name		= "l4_hs",
+	.class		= &am33xx_l4_hwmod_class,
+	.clkdm_name	= "l3_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE,
+	.main_clk	= "l4hs_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM43XX_CM_PER_L4HS_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_rst_info am33xx_wkup_m3_resets[] = {
+	{ .name = "wkup_m3", .rst_shift = 3, .st_shift = 5 },
+};
+
+static struct omap_hwmod am43xx_wkup_m3_hwmod = {
+	.name		= "wkup_m3",
+	.class		= &am33xx_wkup_m3_hwmod_class,
+	.clkdm_name	= "l4_wkup_aon_clkdm",
+	/* Keep hardreset asserted */
+	.flags		= HWMOD_INIT_NO_RESET | HWMOD_NO_IDLEST,
+	.main_clk	= "sys_clkin_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM43XX_CM_WKUP_WKUP_M3_CLKCTRL_OFFSET,
+			.rstctrl_offs	= AM43XX_RM_WKUP_RSTCTRL_OFFSET,
+			.rstst_offs	= AM43XX_RM_WKUP_RSTST_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.rst_lines	= am33xx_wkup_m3_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(am33xx_wkup_m3_resets),
+};
+
+static struct omap_hwmod am43xx_control_hwmod = {
+	.name		= "control",
+	.class		= &am33xx_control_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE,
+	.main_clk	= "sys_clkin_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM43XX_CM_WKUP_CONTROL_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_opt_clk gpio0_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio0_dbclk" },
+};
+
+static struct omap_hwmod am43xx_gpio0_hwmod = {
+	.name		= "gpio1",
+	.class		= &am33xx_gpio_hwmod_class,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "sys_clkin_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM43XX_CM_WKUP_GPIO0_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= gpio0_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio0_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+static struct omap_hwmod_class_sysconfig am43xx_synctimer_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x4,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE,
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am43xx_synctimer_hwmod_class = {
+	.name	= "synctimer",
+	.sysc	= &am43xx_synctimer_sysc,
+};
+
+static struct omap_hwmod am43xx_synctimer_hwmod = {
+	.name		= "counter_32k",
+	.class		= &am43xx_synctimer_hwmod_class,
+	.clkdm_name	= "l4_wkup_aon_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE,
+	.main_clk	= "synctimer_32kclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = AM43XX_CM_WKUP_SYNCTIMER_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_timer8_hwmod = {
+	.name		= "timer8",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer8_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM43XX_CM_PER_TIMER8_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_timer9_hwmod = {
+	.name		= "timer9",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer9_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM43XX_CM_PER_TIMER9_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_timer10_hwmod = {
+	.name		= "timer10",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer10_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM43XX_CM_PER_TIMER10_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_timer11_hwmod = {
+	.name		= "timer11",
+	.class		= &am33xx_timer_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "timer11_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM43XX_CM_PER_TIMER11_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_epwmss3_hwmod = {
+	.name		= "epwmss3",
+	.class		= &am33xx_epwmss_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = AM43XX_CM_PER_EPWMSS3_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_ehrpwm3_hwmod = {
+	.name		= "ehrpwm3",
+	.class		= &am33xx_ehrpwm_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+static struct omap_hwmod am43xx_epwmss4_hwmod = {
+	.name		= "epwmss4",
+	.class		= &am33xx_epwmss_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = AM43XX_CM_PER_EPWMSS4_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_ehrpwm4_hwmod = {
+	.name		= "ehrpwm4",
+	.class		= &am33xx_ehrpwm_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+static struct omap_hwmod am43xx_epwmss5_hwmod = {
+	.name		= "epwmss5",
+	.class		= &am33xx_epwmss_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = AM43XX_CM_PER_EPWMSS5_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_ehrpwm5_hwmod = {
+	.name		= "ehrpwm5",
+	.class		= &am33xx_ehrpwm_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+};
+
+static struct omap_hwmod am43xx_spi2_hwmod = {
+	.name		= "spi2",
+	.class		= &am33xx_spi_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = AM43XX_CM_PER_SPI2_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mcspi_attrib,
+};
+
+static struct omap_hwmod am43xx_spi3_hwmod = {
+	.name		= "spi3",
+	.class		= &am33xx_spi_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = AM43XX_CM_PER_SPI3_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mcspi_attrib,
+};
+
+static struct omap_hwmod am43xx_spi4_hwmod = {
+	.name		= "spi4",
+	.class		= &am33xx_spi_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "dpll_per_m2_div4_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = AM43XX_CM_PER_SPI4_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mcspi_attrib,
+};
+
+static struct omap_hwmod_opt_clk gpio4_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio4_dbclk" },
+};
+
+static struct omap_hwmod am43xx_gpio4_hwmod = {
+	.name		= "gpio5",
+	.class		= &am33xx_gpio_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = AM43XX_CM_PER_GPIO4_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= gpio4_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio4_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio5_dbclk" },
+};
+
+static struct omap_hwmod am43xx_gpio5_hwmod = {
+	.name		= "gpio6",
+	.class		= &am33xx_gpio_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l4ls_gclk",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = AM43XX_CM_PER_GPIO5_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= gpio5_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio5_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+static struct omap_hwmod_class am43xx_ocp2scp_hwmod_class = {
+	.name	= "ocp2scp",
+};
+
+static struct omap_hwmod am43xx_ocp2scp0_hwmod = {
+	.name		= "ocp2scp0",
+	.class		= &am43xx_ocp2scp_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = AM43XX_CM_PER_USBPHYOCP2SCP0_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_ocp2scp1_hwmod = {
+	.name		= "ocp2scp1",
+	.class		= &am43xx_ocp2scp_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.main_clk	= "l4ls_gclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs	= AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_class_sysconfig am43xx_usb_otg_ss_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_DMADISABLE | SYSC_HAS_MIDLEMODE |
+				SYSC_HAS_SIDLEMODE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+				SIDLE_SMART_WKUP | MSTANDBY_FORCE |
+				MSTANDBY_NO | MSTANDBY_SMART |
+				MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am43xx_usb_otg_ss_hwmod_class = {
+	.name	= "usb_otg_ss",
+	.sysc	= &am43xx_usb_otg_ss_sysc,
+};
+
+static struct omap_hwmod am43xx_usb_otg_ss0_hwmod = {
+	.name		= "usb_otg_ss0",
+	.class		= &am43xx_usb_otg_ss_hwmod_class,
+	.clkdm_name	= "l3s_clkdm",
+	.main_clk	= "l3s_gclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs	= AM43XX_CM_PER_USB_OTG_SS0_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod am43xx_usb_otg_ss1_hwmod = {
+	.name		= "usb_otg_ss1",
+	.class		= &am43xx_usb_otg_ss_hwmod_class,
+	.clkdm_name	= "l3s_clkdm",
+	.main_clk	= "l3s_gclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs	= AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_class_sysconfig am43xx_qspi_sysc = {
+	.sysc_offs      = 0x0010,
+	.sysc_flags     = SYSC_HAS_SIDLEMODE,
+	.idlemodes      = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+				SIDLE_SMART_WKUP),
+	.sysc_fields    = &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am43xx_qspi_hwmod_class = {
+	.name   = "qspi",
+	.sysc   = &am43xx_qspi_sysc,
+};
+
+static struct omap_hwmod am43xx_qspi_hwmod = {
+	.name           = "qspi",
+	.class          = &am43xx_qspi_hwmod_class,
+	.clkdm_name     = "l3s_clkdm",
+	.main_clk       = "l3s_gclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = AM43XX_CM_PER_QSPI_CLKCTRL_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* Interfaces */
+static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am43xx_l4_hs_hwmod,
+	.clk		= "l3s_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_wkup_m3__l4_wkup = {
+	.master		= &am43xx_wkup_m3_hwmod,
+	.slave		= &am33xx_l4_wkup_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__wkup_m3 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am43xx_wkup_m3_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l3_main__pruss = {
+	.master		= &am33xx_l3_main_hwmod,
+	.slave		= &am33xx_pruss_hwmod,
+	.clk		= "dpll_core_m4_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__smartreflex0 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_smartreflex0_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__smartreflex1 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_smartreflex1_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__control = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am43xx_control_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__i2c1 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_i2c1_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__gpio0 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am43xx_gpio0_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_hs__cpgmac0 = {
+	.master		= &am43xx_l4_hs_hwmod,
+	.slave		= &am33xx_cpgmac0_hwmod,
+	.clk		= "cpsw_125mhz_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__timer1 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_timer1_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__uart1 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_uart1_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__wd_timer1 = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am33xx_wd_timer1_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_wkup__synctimer = {
+	.master		= &am33xx_l4_wkup_hwmod,
+	.slave		= &am43xx_synctimer_hwmod,
+	.clk		= "sys_clkin_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__timer8 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_timer8_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__timer9 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_timer9_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__timer10 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_timer10_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__timer11 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_timer11_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss3 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_epwmss3_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_epwmss3__ehrpwm3 = {
+	.master		= &am43xx_epwmss3_hwmod,
+	.slave		= &am43xx_ehrpwm3_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss4 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_epwmss4_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_epwmss4__ehrpwm4 = {
+	.master		= &am43xx_epwmss4_hwmod,
+	.slave		= &am43xx_ehrpwm4_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss5 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_epwmss5_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_epwmss5__ehrpwm5 = {
+	.master		= &am43xx_epwmss5_hwmod,
+	.slave		= &am43xx_ehrpwm5_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__mcspi2 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_spi2_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__mcspi3 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_spi3_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__mcspi4 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_spi4_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__gpio4 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_gpio4_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__gpio5 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_gpio5_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__ocp2scp0 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_ocp2scp0_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__ocp2scp1 = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am43xx_ocp2scp1_hwmod,
+	.clk		= "l4ls_gclk",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l3_s__usbotgss0 = {
+	.master         = &am33xx_l3_s_hwmod,
+	.slave          = &am43xx_usb_otg_ss0_hwmod,
+	.clk            = "l3s_gclk",
+	.user           = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l3_s__usbotgss1 = {
+	.master         = &am33xx_l3_s_hwmod,
+	.slave          = &am43xx_usb_otg_ss1_hwmod,
+	.clk            = "l3s_gclk",
+	.user           = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l3_s__qspi = {
+	.master         = &am33xx_l3_s_hwmod,
+	.slave          = &am43xx_qspi_hwmod,
+	.clk            = "l3s_gclk",
+	.user           = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
+	&am33xx_l4_wkup__synctimer,
+	&am43xx_l4_ls__timer8,
+	&am43xx_l4_ls__timer9,
+	&am43xx_l4_ls__timer10,
+	&am43xx_l4_ls__timer11,
+	&am43xx_l4_ls__epwmss3,
+	&am43xx_epwmss3__ehrpwm3,
+	&am43xx_l4_ls__epwmss4,
+	&am43xx_epwmss4__ehrpwm4,
+	&am43xx_l4_ls__epwmss5,
+	&am43xx_epwmss5__ehrpwm5,
+	&am43xx_l4_ls__mcspi2,
+	&am43xx_l4_ls__mcspi3,
+	&am43xx_l4_ls__mcspi4,
+	&am43xx_l4_ls__gpio4,
+	&am43xx_l4_ls__gpio5,
+	&am43xx_l3_main__pruss,
+	&am33xx_mpu__l3_main,
+	&am33xx_mpu__prcm,
+	&am33xx_l3_s__l4_ls,
+	&am33xx_l3_s__l4_wkup,
+	&am43xx_l3_main__l4_hs,
+	&am33xx_l3_main__l3_s,
+	&am33xx_l3_main__l3_instr,
+	&am33xx_l3_main__gfx,
+	&am33xx_l3_s__l3_main,
+	&am33xx_pruss__l3_main,
+	&am43xx_wkup_m3__l4_wkup,
+	&am33xx_gfx__l3_main,
+	&am43xx_l4_wkup__wkup_m3,
+	&am43xx_l4_wkup__control,
+	&am43xx_l4_wkup__smartreflex0,
+	&am43xx_l4_wkup__smartreflex1,
+	&am43xx_l4_wkup__uart1,
+	&am43xx_l4_wkup__timer1,
+	&am43xx_l4_wkup__i2c1,
+	&am43xx_l4_wkup__gpio0,
+	&am43xx_l4_wkup__wd_timer1,
+	&am43xx_l3_s__qspi,
+	&am33xx_l4_per__dcan0,
+	&am33xx_l4_per__dcan1,
+	&am33xx_l4_per__gpio1,
+	&am33xx_l4_per__gpio2,
+	&am33xx_l4_per__gpio3,
+	&am33xx_l4_per__i2c2,
+	&am33xx_l4_per__i2c3,
+	&am33xx_l4_per__mailbox,
+	&am33xx_l4_ls__mcasp0,
+	&am33xx_l4_ls__mcasp1,
+	&am33xx_l4_ls__mmc0,
+	&am33xx_l4_ls__mmc1,
+	&am33xx_l3_s__mmc2,
+	&am33xx_l4_ls__timer2,
+	&am33xx_l4_ls__timer3,
+	&am33xx_l4_ls__timer4,
+	&am33xx_l4_ls__timer5,
+	&am33xx_l4_ls__timer6,
+	&am33xx_l4_ls__timer7,
+	&am33xx_l3_main__tpcc,
+	&am33xx_l4_ls__uart2,
+	&am33xx_l4_ls__uart3,
+	&am33xx_l4_ls__uart4,
+	&am33xx_l4_ls__uart5,
+	&am33xx_l4_ls__uart6,
+	&am33xx_l4_ls__elm,
+	&am33xx_l4_ls__epwmss0,
+	&am33xx_epwmss0__ecap0,
+	&am33xx_epwmss0__eqep0,
+	&am33xx_epwmss0__ehrpwm0,
+	&am33xx_l4_ls__epwmss1,
+	&am33xx_epwmss1__ecap1,
+	&am33xx_epwmss1__eqep1,
+	&am33xx_epwmss1__ehrpwm1,
+	&am33xx_l4_ls__epwmss2,
+	&am33xx_epwmss2__ecap2,
+	&am33xx_epwmss2__eqep2,
+	&am33xx_epwmss2__ehrpwm2,
+	&am33xx_l3_s__gpmc,
+	&am33xx_l4_ls__mcspi0,
+	&am33xx_l4_ls__mcspi1,
+	&am33xx_l3_main__tptc0,
+	&am33xx_l3_main__tptc1,
+	&am33xx_l3_main__tptc2,
+	&am33xx_l3_main__ocmc,
+	&am43xx_l4_hs__cpgmac0,
+	&am33xx_cpgmac0__mdio,
+	&am33xx_l3_main__sha0,
+	&am33xx_l3_main__aes0,
+	&am43xx_l4_ls__ocp2scp0,
+	&am43xx_l4_ls__ocp2scp1,
+	&am43xx_l3_s__usbotgss0,
+	&am43xx_l3_s__usbotgss1,
+	NULL,
+};
+
+int __init am43xx_hwmod_init(void)
+{
+	omap_hwmod_am43xx_reg();
+	omap_hwmod_init();
+	return omap_hwmod_register_links(am43xx_hwmod_ocp_ifs);
+}
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 9c3b504..1e5b12c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -914,7 +914,7 @@ static struct omap_hwmod omap44xx_emif1_hwmod = {
 	.name		= "emif1",
 	.class		= &omap44xx_emif_hwmod_class,
 	.clkdm_name	= "l3_emif_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "ddrphy_ck",
 	.prcm = {
 		.omap4 = {
@@ -930,7 +930,7 @@ static struct omap_hwmod omap44xx_emif2_hwmod = {
 	.name		= "emif2",
 	.class		= &omap44xx_emif_hwmod_class,
 	.clkdm_name	= "l3_emif_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "ddrphy_ck",
 	.prcm = {
 		.omap4 = {
@@ -2193,7 +2193,7 @@ static struct omap_hwmod omap44xx_mpu_hwmod = {
 	.name		= "mpu",
 	.class		= &omap44xx_mpu_hwmod_class,
 	.clkdm_name	= "mpuss_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "dpll_mpu_m2_ck",
 	.prcm = {
 		.omap4 = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index 3c70f5c..9e08d699 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -32,7 +32,6 @@
 #include "cm1_54xx.h"
 #include "cm2_54xx.h"
 #include "prm54xx.h"
-#include "prm-regbits-54xx.h"
 #include "i2c.h"
 #include "mmc.h"
 #include "wd_timer.h"
@@ -353,7 +352,7 @@ static struct omap_hwmod omap54xx_emif1_hwmod = {
 	.name		= "emif1",
 	.class		= &omap54xx_emif_hwmod_class,
 	.clkdm_name	= "emif_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "dpll_core_h11x2_ck",
 	.prcm = {
 		.omap4 = {
@@ -369,7 +368,7 @@ static struct omap_hwmod omap54xx_emif2_hwmod = {
 	.name		= "emif2",
 	.class		= &omap54xx_emif_hwmod_class,
 	.clkdm_name	= "emif_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "dpll_core_h11x2_ck",
 	.prcm = {
 		.omap4 = {
@@ -741,6 +740,39 @@ static struct omap_hwmod omap54xx_kbd_hwmod = {
 };
 
 /*
+ * 'mailbox' class
+ * mailbox module allowing communication between the on-chip processors using a
+ * queued mailbox-interrupt mechanism.
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_mailbox_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class omap54xx_mailbox_hwmod_class = {
+	.name	= "mailbox",
+	.sysc	= &omap54xx_mailbox_sysc,
+};
+
+/* mailbox */
+static struct omap_hwmod omap54xx_mailbox_hwmod = {
+	.name		= "mailbox",
+	.class		= &omap54xx_mailbox_hwmod_class,
+	.clkdm_name	= "l4cfg_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_L4CFG_MAILBOX_CLKCTRL_OFFSET,
+			.context_offs = OMAP54XX_RM_L4CFG_MAILBOX_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/*
  * 'mcbsp' class
  * multi channel buffered serial port controller
  */
@@ -1103,7 +1135,7 @@ static struct omap_hwmod omap54xx_mpu_hwmod = {
 	.name		= "mpu",
 	.class		= &omap54xx_mpu_hwmod_class,
 	.clkdm_name	= "mpu_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "dpll_mpu_m2_ck",
 	.prcm = {
 		.omap4 = {
@@ -1114,6 +1146,77 @@ static struct omap_hwmod omap54xx_mpu_hwmod = {
 };
 
 /*
+ * 'spinlock' class
+ * spinlock provides hardware assistance for synchronizing the processes
+ * running on multiple processors
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_spinlock_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap54xx_spinlock_hwmod_class = {
+	.name	= "spinlock",
+	.sysc	= &omap54xx_spinlock_sysc,
+};
+
+/* spinlock */
+static struct omap_hwmod omap54xx_spinlock_hwmod = {
+	.name		= "spinlock",
+	.class		= &omap54xx_spinlock_hwmod_class,
+	.clkdm_name	= "l4cfg_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_L4CFG_SPINLOCK_CLKCTRL_OFFSET,
+			.context_offs = OMAP54XX_RM_L4CFG_SPINLOCK_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/*
+ * 'ocp2scp' class
+ * bridge to transform ocp interface protocol to scp (serial control port)
+ * protocol
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_ocp2scp_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
+			SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap54xx_ocp2scp_hwmod_class = {
+	.name	= "ocp2scp",
+	.sysc	= &omap54xx_ocp2scp_sysc,
+};
+
+/* ocp2scp1 */
+static struct omap_hwmod omap54xx_ocp2scp1_hwmod = {
+	.name		= "ocp2scp1",
+	.class		= &omap54xx_ocp2scp_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.main_clk	= "l4_root_clk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_L3INIT_OCP2SCP1_CLKCTRL_OFFSET,
+			.context_offs = OMAP54XX_RM_L3INIT_OCP2SCP1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/*
  * 'timer' class
  * general purpose timer module with accurate 1ms tick
  * This class contains several variants: ['timer_1ms', 'timer']
@@ -1433,6 +1536,123 @@ static struct omap_hwmod omap54xx_uart6_hwmod = {
 };
 
 /*
+ * 'usb_host_hs' class
+ * high-speed multi-port usb host controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_usb_host_hs_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class omap54xx_usb_host_hs_hwmod_class = {
+	.name	= "usb_host_hs",
+	.sysc	= &omap54xx_usb_host_hs_sysc,
+};
+
+static struct omap_hwmod omap54xx_usb_host_hs_hwmod = {
+	.name		= "usb_host_hs",
+	.class		= &omap54xx_usb_host_hs_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	/*
+	 * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
+	 * id: i660
+	 *
+	 * Description:
+	 * In the following configuration :
+	 * - USBHOST module is set to smart-idle mode
+	 * - PRCM asserts idle_req to the USBHOST module ( This typically
+	 *   happens when the system is going to a low power mode : all ports
+	 *   have been suspended, the master part of the USBHOST module has
+	 *   entered the standby state, and SW has cut the functional clocks)
+	 * - an USBHOST interrupt occurs before the module is able to answer
+	 *   idle_ack, typically a remote wakeup IRQ.
+	 * Then the USB HOST module will enter a deadlock situation where it
+	 * is no more accessible nor functional.
+	 *
+	 * Workaround:
+	 * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
+	 */
+
+	/*
+	 * Errata: USB host EHCI may stall when entering smart-standby mode
+	 * Id: i571
+	 *
+	 * Description:
+	 * When the USBHOST module is set to smart-standby mode, and when it is
+	 * ready to enter the standby state (i.e. all ports are suspended and
+	 * all attached devices are in suspend mode), then it can wrongly assert
+	 * the Mstandby signal too early while there are still some residual OCP
+	 * transactions ongoing. If this condition occurs, the internal state
+	 * machine may go to an undefined state and the USB link may be stuck
+	 * upon the next resume.
+	 *
+	 * Workaround:
+	 * Don't use smart standby; use only force standby,
+	 * hence HWMOD_SWSUP_MSTANDBY
+	 */
+
+	/*
+	 * During system boot; If the hwmod framework resets the module
+	 * the module will have smart idle settings; which can lead to deadlock
+	 * (above Errata Id:i660); so, dont reset the module during boot;
+	 * Use HWMOD_INIT_NO_RESET.
+	 */
+
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
+			  HWMOD_INIT_NO_RESET,
+	.main_clk	= "l3init_60m_fclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_L3INIT_USB_HOST_HS_CLKCTRL_OFFSET,
+			.context_offs = OMAP54XX_RM_L3INIT_USB_HOST_HS_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'usb_tll_hs' class
+ * usb_tll_hs module is the adapter on the usb_host_hs ports
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_usb_tll_hs_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap54xx_usb_tll_hs_hwmod_class = {
+	.name	= "usb_tll_hs",
+	.sysc	= &omap54xx_usb_tll_hs_sysc,
+};
+
+static struct omap_hwmod omap54xx_usb_tll_hs_hwmod = {
+	.name		= "usb_tll_hs",
+	.class		= &omap54xx_usb_tll_hs_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.main_clk	= "l4_root_clk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_L3INIT_USB_TLL_HS_CLKCTRL_OFFSET,
+			.context_offs = OMAP54XX_RM_L3INIT_USB_TLL_HS_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/*
  * 'usb_otg_ss' class
  * 2.0 super speed (usb_otg_ss) controller
  */
@@ -1808,6 +2028,14 @@ static struct omap_hwmod_ocp_if omap54xx_l4_wkup__kbd = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l4_cfg -> mailbox */
+static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mailbox = {
+	.master		= &omap54xx_l4_cfg_hwmod,
+	.slave		= &omap54xx_mailbox_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* l4_abe -> mcbsp1 */
 static struct omap_hwmod_ocp_if omap54xx_l4_abe__mcbsp1 = {
 	.master		= &omap54xx_l4_abe_hwmod,
@@ -1920,6 +2148,22 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l4_cfg -> spinlock */
+static struct omap_hwmod_ocp_if omap54xx_l4_cfg__spinlock = {
+	.master		= &omap54xx_l4_cfg_hwmod,
+	.slave		= &omap54xx_spinlock_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> ocp2scp1 */
+static struct omap_hwmod_ocp_if omap54xx_l4_cfg__ocp2scp1 = {
+	.master		= &omap54xx_l4_cfg_hwmod,
+	.slave		= &omap54xx_ocp2scp1_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* l4_wkup -> timer1 */
 static struct omap_hwmod_ocp_if omap54xx_l4_wkup__timer1 = {
 	.master		= &omap54xx_l4_wkup_hwmod,
@@ -2056,6 +2300,22 @@ static struct omap_hwmod_ocp_if omap54xx_l4_per__uart6 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l4_cfg -> usb_host_hs */
+static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_host_hs = {
+	.master		= &omap54xx_l4_cfg_hwmod,
+	.slave		= &omap54xx_usb_host_hs_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> usb_tll_hs */
+static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_tll_hs = {
+	.master		= &omap54xx_l4_cfg_hwmod,
+	.slave		= &omap54xx_usb_tll_hs_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* l4_cfg -> usb_otg_ss */
 static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_otg_ss = {
 	.master		= &omap54xx_l4_cfg_hwmod,
@@ -2108,6 +2368,7 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_l4_per__i2c4,
 	&omap54xx_l4_per__i2c5,
 	&omap54xx_l4_wkup__kbd,
+	&omap54xx_l4_cfg__mailbox,
 	&omap54xx_l4_abe__mcbsp1,
 	&omap54xx_l4_abe__mcbsp2,
 	&omap54xx_l4_abe__mcbsp3,
@@ -2122,6 +2383,8 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_l4_per__mmc4,
 	&omap54xx_l4_per__mmc5,
 	&omap54xx_l4_cfg__mpu,
+	&omap54xx_l4_cfg__spinlock,
+	&omap54xx_l4_cfg__ocp2scp1,
 	&omap54xx_l4_wkup__timer1,
 	&omap54xx_l4_per__timer2,
 	&omap54xx_l4_per__timer3,
@@ -2139,6 +2402,8 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_l4_per__uart4,
 	&omap54xx_l4_per__uart5,
 	&omap54xx_l4_per__uart6,
+	&omap54xx_l4_cfg__usb_host_hs,
+	&omap54xx_l4_cfg__usb_tll_hs,
 	&omap54xx_l4_cfg__usb_otg_ss,
 	&omap54xx_l4_wkup__wd_timer2,
 	NULL,
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
new file mode 100644
index 0000000..db32d53
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -0,0 +1,2724 @@
+/*
+ * Hardware modules present on the DRA7xx chips
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Paul Walmsley
+ * Benoit Cousson
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/power/smartreflex.h>
+#include <linux/i2c-omap.h>
+
+#include <linux/omap-dma.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
+#include <plat/dmtimer.h>
+
+#include "omap_hwmod.h"
+#include "omap_hwmod_common_data.h"
+#include "cm1_7xx.h"
+#include "cm2_7xx.h"
+#include "prm7xx.h"
+#include "i2c.h"
+#include "mmc.h"
+#include "wd_timer.h"
+
+/* Base offset for all DRA7XX interrupts external to MPUSS */
+#define DRA7XX_IRQ_GIC_START	32
+
+/* Base offset for all DRA7XX dma requests */
+#define DRA7XX_DMA_REQ_START	1
+
+
+/*
+ * IP blocks
+ */
+
+/*
+ * 'l3' class
+ * instance(s): l3_instr, l3_main_1, l3_main_2
+ */
+static struct omap_hwmod_class dra7xx_l3_hwmod_class = {
+	.name	= "l3",
+};
+
+/* l3_instr */
+static struct omap_hwmod dra7xx_l3_instr_hwmod = {
+	.name		= "l3_instr",
+	.class		= &dra7xx_l3_hwmod_class,
+	.clkdm_name	= "l3instr_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/* l3_main_1 */
+static struct omap_hwmod dra7xx_l3_main_1_hwmod = {
+	.name		= "l3_main_1",
+	.class		= &dra7xx_l3_hwmod_class,
+	.clkdm_name	= "l3main1_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3MAIN1_L3_MAIN_1_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3MAIN1_L3_MAIN_1_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/* l3_main_2 */
+static struct omap_hwmod dra7xx_l3_main_2_hwmod = {
+	.name		= "l3_main_2",
+	.class		= &dra7xx_l3_hwmod_class,
+	.clkdm_name	= "l3instr_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3INSTR_L3_MAIN_2_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3INSTR_L3_MAIN_2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/*
+ * 'l4' class
+ * instance(s): l4_cfg, l4_per1, l4_per2, l4_per3, l4_wkup
+ */
+static struct omap_hwmod_class dra7xx_l4_hwmod_class = {
+	.name	= "l4",
+};
+
+/* l4_cfg */
+static struct omap_hwmod dra7xx_l4_cfg_hwmod = {
+	.name		= "l4_cfg",
+	.class		= &dra7xx_l4_hwmod_class,
+	.clkdm_name	= "l4cfg_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4CFG_L4_CFG_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/* l4_per1 */
+static struct omap_hwmod dra7xx_l4_per1_hwmod = {
+	.name		= "l4_per1",
+	.class		= &dra7xx_l4_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_L4_PER1_CLKCTRL_OFFSET,
+			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+		},
+	},
+};
+
+/* l4_per2 */
+static struct omap_hwmod dra7xx_l4_per2_hwmod = {
+	.name		= "l4_per2",
+	.class		= &dra7xx_l4_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER2_L4_PER2_CLKCTRL_OFFSET,
+			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+		},
+	},
+};
+
+/* l4_per3 */
+static struct omap_hwmod dra7xx_l4_per3_hwmod = {
+	.name		= "l4_per3",
+	.class		= &dra7xx_l4_hwmod_class,
+	.clkdm_name	= "l4per3_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER3_L4_PER3_CLKCTRL_OFFSET,
+			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+		},
+	},
+};
+
+/* l4_wkup */
+static struct omap_hwmod dra7xx_l4_wkup_hwmod = {
+	.name		= "l4_wkup",
+	.class		= &dra7xx_l4_hwmod_class,
+	.clkdm_name	= "wkupaon_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_WKUPAON_L4_WKUP_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_WKUPAON_L4_WKUP_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/*
+ * 'atl' class
+ *
+ */
+
+static struct omap_hwmod_class dra7xx_atl_hwmod_class = {
+	.name	= "atl",
+};
+
+/* atl */
+static struct omap_hwmod dra7xx_atl_hwmod = {
+	.name		= "atl",
+	.class		= &dra7xx_atl_hwmod_class,
+	.clkdm_name	= "atl_clkdm",
+	.main_clk	= "atl_gfclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_ATL_ATL_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_ATL_ATL_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'bb2d' class
+ *
+ */
+
+static struct omap_hwmod_class dra7xx_bb2d_hwmod_class = {
+	.name	= "bb2d",
+};
+
+/* bb2d */
+static struct omap_hwmod dra7xx_bb2d_hwmod = {
+	.name		= "bb2d",
+	.class		= &dra7xx_bb2d_hwmod_class,
+	.clkdm_name	= "dss_clkdm",
+	.main_clk	= "dpll_core_h24x2_ck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_DSS_BB2D_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_DSS_BB2D_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'counter' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_counter_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE,
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dra7xx_counter_hwmod_class = {
+	.name	= "counter",
+	.sysc	= &dra7xx_counter_sysc,
+};
+
+/* counter_32k */
+static struct omap_hwmod dra7xx_counter_32k_hwmod = {
+	.name		= "counter_32k",
+	.class		= &dra7xx_counter_hwmod_class,
+	.clkdm_name	= "wkupaon_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE,
+	.main_clk	= "wkupaon_iclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_WKUPAON_COUNTER_32K_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_WKUPAON_COUNTER_32K_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/*
+ * 'ctrl_module' class
+ *
+ */
+
+static struct omap_hwmod_class dra7xx_ctrl_module_hwmod_class = {
+	.name	= "ctrl_module",
+};
+
+/* ctrl_module_wkup */
+static struct omap_hwmod dra7xx_ctrl_module_wkup_hwmod = {
+	.name		= "ctrl_module_wkup",
+	.class		= &dra7xx_ctrl_module_hwmod_class,
+	.clkdm_name	= "wkupaon_clkdm",
+	.prcm = {
+		.omap4 = {
+			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+		},
+	},
+};
+
+/*
+ * 'dcan' class
+ *
+ */
+
+static struct omap_hwmod_class dra7xx_dcan_hwmod_class = {
+	.name	= "dcan",
+};
+
+/* dcan1 */
+static struct omap_hwmod dra7xx_dcan1_hwmod = {
+	.name		= "dcan1",
+	.class		= &dra7xx_dcan_hwmod_class,
+	.clkdm_name	= "wkupaon_clkdm",
+	.main_clk	= "dcan1_sys_clk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_WKUPAON_DCAN1_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_WKUPAON_DCAN1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* dcan2 */
+static struct omap_hwmod dra7xx_dcan2_hwmod = {
+	.name		= "dcan2",
+	.class		= &dra7xx_dcan_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.main_clk	= "sys_clkin1",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER2_DCAN2_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER2_DCAN2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'dma' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_dma_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x002c,
+	.syss_offs	= 0x0028,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_EMUFREE | SYSC_HAS_MIDLEMODE |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			   SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dra7xx_dma_hwmod_class = {
+	.name	= "dma",
+	.sysc	= &dra7xx_dma_sysc,
+};
+
+/* dma dev_attr */
+static struct omap_dma_dev_attr dma_dev_attr = {
+	.dev_caps	= RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
+			  IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
+	.lch_count	= 32,
+};
+
+/* dma_system */
+static struct omap_hwmod_irq_info dra7xx_dma_system_irqs[] = {
+	{ .name = "0", .irq = 12 + DRA7XX_IRQ_GIC_START },
+	{ .name = "1", .irq = 13 + DRA7XX_IRQ_GIC_START },
+	{ .name = "2", .irq = 14 + DRA7XX_IRQ_GIC_START },
+	{ .name = "3", .irq = 15 + DRA7XX_IRQ_GIC_START },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod dra7xx_dma_system_hwmod = {
+	.name		= "dma_system",
+	.class		= &dra7xx_dma_hwmod_class,
+	.clkdm_name	= "dma_clkdm",
+	.mpu_irqs	= dra7xx_dma_system_irqs,
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_DMA_DMA_SYSTEM_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_DMA_DMA_SYSTEM_CONTEXT_OFFSET,
+		},
+	},
+	.dev_attr	= &dma_dev_attr,
+};
+
+/*
+ * 'dss' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_dss_sysc = {
+	.rev_offs	= 0x0000,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= SYSS_HAS_RESET_STATUS,
+};
+
+static struct omap_hwmod_class dra7xx_dss_hwmod_class = {
+	.name	= "dss",
+	.sysc	= &dra7xx_dss_sysc,
+	.reset	= omap_dss_reset,
+};
+
+/* dss */
+static struct omap_hwmod_dma_info dra7xx_dss_sdma_reqs[] = {
+	{ .dma_req = 75 + DRA7XX_DMA_REQ_START },
+	{ .dma_req = -1 }
+};
+
+static struct omap_hwmod_opt_clk dss_opt_clks[] = {
+	{ .role = "dss_clk", .clk = "dss_dss_clk" },
+	{ .role = "hdmi_phy_clk", .clk = "dss_48mhz_clk" },
+	{ .role = "32khz_clk", .clk = "dss_32khz_clk" },
+	{ .role = "video2_clk", .clk = "dss_video2_clk" },
+	{ .role = "video1_clk", .clk = "dss_video1_clk" },
+	{ .role = "hdmi_clk", .clk = "dss_hdmi_clk" },
+};
+
+static struct omap_hwmod dra7xx_dss_hwmod = {
+	.name		= "dss_core",
+	.class		= &dra7xx_dss_hwmod_class,
+	.clkdm_name	= "dss_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.sdma_reqs	= dra7xx_dss_sdma_reqs,
+	.main_clk	= "dss_dss_clk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_DSS_DSS_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= dss_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_opt_clks),
+};
+
+/*
+ * 'dispc' class
+ * display controller
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_dispc_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_MIDLEMODE |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			   SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dra7xx_dispc_hwmod_class = {
+	.name	= "dispc",
+	.sysc	= &dra7xx_dispc_sysc,
+};
+
+/* dss_dispc */
+/* dss_dispc dev_attr */
+static struct omap_dss_dispc_dev_attr dss_dispc_dev_attr = {
+	.has_framedonetv_irq	= 1,
+	.manager_count		= 4,
+};
+
+static struct omap_hwmod dra7xx_dss_dispc_hwmod = {
+	.name		= "dss_dispc",
+	.class		= &dra7xx_dispc_hwmod_class,
+	.clkdm_name	= "dss_clkdm",
+	.main_clk	= "dss_dss_clk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+		},
+	},
+	.dev_attr	= &dss_dispc_dev_attr,
+};
+
+/*
+ * 'hdmi' class
+ * hdmi controller
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_hdmi_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class dra7xx_hdmi_hwmod_class = {
+	.name	= "hdmi",
+	.sysc	= &dra7xx_hdmi_sysc,
+};
+
+/* dss_hdmi */
+
+static struct omap_hwmod_opt_clk dss_hdmi_opt_clks[] = {
+	{ .role = "sys_clk", .clk = "dss_hdmi_clk" },
+};
+
+static struct omap_hwmod dra7xx_dss_hdmi_hwmod = {
+	.name		= "dss_hdmi",
+	.class		= &dra7xx_hdmi_hwmod_class,
+	.clkdm_name	= "dss_clkdm",
+	.main_clk	= "dss_48mhz_clk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_DSS_DSS_CLKCTRL_OFFSET,
+			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
+		},
+	},
+	.opt_clks	= dss_hdmi_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dss_hdmi_opt_clks),
+};
+
+/*
+ * 'elm' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_elm_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			   SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dra7xx_elm_hwmod_class = {
+	.name	= "elm",
+	.sysc	= &dra7xx_elm_sysc,
+};
+
+/* elm */
+
+static struct omap_hwmod dra7xx_elm_hwmod = {
+	.name		= "elm",
+	.class		= &dra7xx_elm_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_ELM_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_ELM_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/*
+ * 'gpio' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_gpio_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0114,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			   SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dra7xx_gpio_hwmod_class = {
+	.name	= "gpio",
+	.sysc	= &dra7xx_gpio_sysc,
+	.rev	= 2,
+};
+
+/* gpio dev_attr */
+static struct omap_gpio_dev_attr gpio_dev_attr = {
+	.bank_width	= 32,
+	.dbck_flag	= true,
+};
+
+/* gpio1 */
+static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio1_dbclk" },
+};
+
+static struct omap_hwmod dra7xx_gpio1_hwmod = {
+	.name		= "gpio1",
+	.class		= &dra7xx_gpio_hwmod_class,
+	.clkdm_name	= "wkupaon_clkdm",
+	.main_clk	= "wkupaon_iclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_WKUPAON_GPIO1_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_WKUPAON_GPIO1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+	.opt_clks	= gpio1_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio1_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/* gpio2 */
+static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio2_dbclk" },
+};
+
+static struct omap_hwmod dra7xx_gpio2_hwmod = {
+	.name		= "gpio2",
+	.class		= &dra7xx_gpio_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_GPIO2_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_GPIO2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+	.opt_clks	= gpio2_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio2_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/* gpio3 */
+static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio3_dbclk" },
+};
+
+static struct omap_hwmod dra7xx_gpio3_hwmod = {
+	.name		= "gpio3",
+	.class		= &dra7xx_gpio_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_GPIO3_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_GPIO3_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+	.opt_clks	= gpio3_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio3_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/* gpio4 */
+static struct omap_hwmod_opt_clk gpio4_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio4_dbclk" },
+};
+
+static struct omap_hwmod dra7xx_gpio4_hwmod = {
+	.name		= "gpio4",
+	.class		= &dra7xx_gpio_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_GPIO4_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_GPIO4_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+	.opt_clks	= gpio4_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio4_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/* gpio5 */
+static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio5_dbclk" },
+};
+
+static struct omap_hwmod dra7xx_gpio5_hwmod = {
+	.name		= "gpio5",
+	.class		= &dra7xx_gpio_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_GPIO5_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_GPIO5_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+	.opt_clks	= gpio5_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio5_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/* gpio6 */
+static struct omap_hwmod_opt_clk gpio6_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio6_dbclk" },
+};
+
+static struct omap_hwmod dra7xx_gpio6_hwmod = {
+	.name		= "gpio6",
+	.class		= &dra7xx_gpio_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_GPIO6_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_GPIO6_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+	.opt_clks	= gpio6_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio6_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/* gpio7 */
+static struct omap_hwmod_opt_clk gpio7_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio7_dbclk" },
+};
+
+static struct omap_hwmod dra7xx_gpio7_hwmod = {
+	.name		= "gpio7",
+	.class		= &dra7xx_gpio_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_GPIO7_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_GPIO7_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+	.opt_clks	= gpio7_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio7_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/* gpio8 */
+static struct omap_hwmod_opt_clk gpio8_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio8_dbclk" },
+};
+
+static struct omap_hwmod dra7xx_gpio8_hwmod = {
+	.name		= "gpio8",
+	.class		= &dra7xx_gpio_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_GPIO8_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_GPIO8_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+	.opt_clks	= gpio8_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio8_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+};
+
+/*
+ * 'gpmc' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_gpmc_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dra7xx_gpmc_hwmod_class = {
+	.name	= "gpmc",
+	.sysc	= &dra7xx_gpmc_sysc,
+};
+
+/* gpmc */
+
+static struct omap_hwmod dra7xx_gpmc_hwmod = {
+	.name		= "gpmc",
+	.class		= &dra7xx_gpmc_hwmod_class,
+	.clkdm_name	= "l3main1_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3MAIN1_GPMC_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3MAIN1_GPMC_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/*
+ * 'hdq1w' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_hdq1w_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0014,
+	.syss_offs	= 0x0018,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SOFTRESET |
+			   SYSS_HAS_RESET_STATUS),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dra7xx_hdq1w_hwmod_class = {
+	.name	= "hdq1w",
+	.sysc	= &dra7xx_hdq1w_sysc,
+};
+
+/* hdq1w */
+
+static struct omap_hwmod dra7xx_hdq1w_hwmod = {
+	.name		= "hdq1w",
+	.class		= &dra7xx_hdq1w_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_INIT_NO_RESET,
+	.main_clk	= "func_12m_fclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_HDQ1W_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_HDQ1W_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'i2c' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_i2c_sysc = {
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0090,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.clockact	= CLOCKACT_TEST_ICLK,
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dra7xx_i2c_hwmod_class = {
+	.name	= "i2c",
+	.sysc	= &dra7xx_i2c_sysc,
+	.reset	= &omap_i2c_reset,
+	.rev	= OMAP_I2C_IP_VERSION_2,
+};
+
+/* i2c dev_attr */
+static struct omap_i2c_dev_attr i2c_dev_attr = {
+	.flags	= OMAP_I2C_FLAG_BUS_SHIFT_NONE,
+};
+
+/* i2c1 */
+static struct omap_hwmod dra7xx_i2c1_hwmod = {
+	.name		= "i2c1",
+	.class		= &dra7xx_i2c_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+	.main_clk	= "func_96m_fclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_I2C1_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_I2C1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &i2c_dev_attr,
+};
+
+/* i2c2 */
+static struct omap_hwmod dra7xx_i2c2_hwmod = {
+	.name		= "i2c2",
+	.class		= &dra7xx_i2c_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+	.main_clk	= "func_96m_fclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_I2C2_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_I2C2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &i2c_dev_attr,
+};
+
+/* i2c3 */
+static struct omap_hwmod dra7xx_i2c3_hwmod = {
+	.name		= "i2c3",
+	.class		= &dra7xx_i2c_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+	.main_clk	= "func_96m_fclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_I2C3_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_I2C3_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &i2c_dev_attr,
+};
+
+/* i2c4 */
+static struct omap_hwmod dra7xx_i2c4_hwmod = {
+	.name		= "i2c4",
+	.class		= &dra7xx_i2c_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+	.main_clk	= "func_96m_fclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_I2C4_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_I2C4_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &i2c_dev_attr,
+};
+
+/* i2c5 */
+static struct omap_hwmod dra7xx_i2c5_hwmod = {
+	.name		= "i2c5",
+	.class		= &dra7xx_i2c_hwmod_class,
+	.clkdm_name	= "ipu_clkdm",
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+	.main_clk	= "func_96m_fclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_IPU_I2C5_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_IPU_I2C5_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &i2c_dev_attr,
+};
+
+/*
+ * 'mcspi' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_mcspi_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class dra7xx_mcspi_hwmod_class = {
+	.name	= "mcspi",
+	.sysc	= &dra7xx_mcspi_sysc,
+	.rev	= OMAP4_MCSPI_REV,
+};
+
+/* mcspi1 */
+/* mcspi1 dev_attr */
+static struct omap2_mcspi_dev_attr mcspi1_dev_attr = {
+	.num_chipselect	= 4,
+};
+
+static struct omap_hwmod dra7xx_mcspi1_hwmod = {
+	.name		= "mcspi1",
+	.class		= &dra7xx_mcspi_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "func_48m_fclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_MCSPI1_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_MCSPI1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mcspi1_dev_attr,
+};
+
+/* mcspi2 */
+/* mcspi2 dev_attr */
+static struct omap2_mcspi_dev_attr mcspi2_dev_attr = {
+	.num_chipselect	= 2,
+};
+
+static struct omap_hwmod dra7xx_mcspi2_hwmod = {
+	.name		= "mcspi2",
+	.class		= &dra7xx_mcspi_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "func_48m_fclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_MCSPI2_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_MCSPI2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mcspi2_dev_attr,
+};
+
+/* mcspi3 */
+/* mcspi3 dev_attr */
+static struct omap2_mcspi_dev_attr mcspi3_dev_attr = {
+	.num_chipselect	= 2,
+};
+
+static struct omap_hwmod dra7xx_mcspi3_hwmod = {
+	.name		= "mcspi3",
+	.class		= &dra7xx_mcspi_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "func_48m_fclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_MCSPI3_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_MCSPI3_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mcspi3_dev_attr,
+};
+
+/* mcspi4 */
+/* mcspi4 dev_attr */
+static struct omap2_mcspi_dev_attr mcspi4_dev_attr = {
+	.num_chipselect	= 1,
+};
+
+static struct omap_hwmod dra7xx_mcspi4_hwmod = {
+	.name		= "mcspi4",
+	.class		= &dra7xx_mcspi_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "func_48m_fclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_MCSPI4_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_MCSPI4_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mcspi4_dev_attr,
+};
+
+/*
+ * 'mmc' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_mmc_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_MIDLEMODE |
+			   SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class dra7xx_mmc_hwmod_class = {
+	.name	= "mmc",
+	.sysc	= &dra7xx_mmc_sysc,
+};
+
+/* mmc1 */
+static struct omap_hwmod_opt_clk mmc1_opt_clks[] = {
+	{ .role = "clk32k", .clk = "mmc1_clk32k" },
+};
+
+/* mmc1 dev_attr */
+static struct omap_mmc_dev_attr mmc1_dev_attr = {
+	.flags	= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
+};
+
+static struct omap_hwmod dra7xx_mmc1_hwmod = {
+	.name		= "mmc1",
+	.class		= &dra7xx_mmc_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.main_clk	= "mmc1_fclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3INIT_MMC1_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3INIT_MMC1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= mmc1_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mmc1_opt_clks),
+	.dev_attr	= &mmc1_dev_attr,
+};
+
+/* mmc2 */
+static struct omap_hwmod_opt_clk mmc2_opt_clks[] = {
+	{ .role = "clk32k", .clk = "mmc2_clk32k" },
+};
+
+static struct omap_hwmod dra7xx_mmc2_hwmod = {
+	.name		= "mmc2",
+	.class		= &dra7xx_mmc_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.main_clk	= "mmc2_fclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3INIT_MMC2_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3INIT_MMC2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= mmc2_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mmc2_opt_clks),
+};
+
+/* mmc3 */
+static struct omap_hwmod_opt_clk mmc3_opt_clks[] = {
+	{ .role = "clk32k", .clk = "mmc3_clk32k" },
+};
+
+static struct omap_hwmod dra7xx_mmc3_hwmod = {
+	.name		= "mmc3",
+	.class		= &dra7xx_mmc_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "mmc3_gfclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_MMC3_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_MMC3_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= mmc3_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mmc3_opt_clks),
+};
+
+/* mmc4 */
+static struct omap_hwmod_opt_clk mmc4_opt_clks[] = {
+	{ .role = "clk32k", .clk = "mmc4_clk32k" },
+};
+
+static struct omap_hwmod dra7xx_mmc4_hwmod = {
+	.name		= "mmc4",
+	.class		= &dra7xx_mmc_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "mmc4_gfclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_MMC4_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_MMC4_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= mmc4_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mmc4_opt_clks),
+};
+
+/*
+ * 'mpu' class
+ *
+ */
+
+static struct omap_hwmod_class dra7xx_mpu_hwmod_class = {
+	.name	= "mpu",
+};
+
+/* mpu */
+static struct omap_hwmod dra7xx_mpu_hwmod = {
+	.name		= "mpu",
+	.class		= &dra7xx_mpu_hwmod_class,
+	.clkdm_name	= "mpu_clkdm",
+	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.main_clk	= "dpll_mpu_m2_ck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_MPU_MPU_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_MPU_MPU_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/*
+ * 'ocp2scp' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_ocp2scp_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dra7xx_ocp2scp_hwmod_class = {
+	.name	= "ocp2scp",
+	.sysc	= &dra7xx_ocp2scp_sysc,
+};
+
+/* ocp2scp1 */
+static struct omap_hwmod dra7xx_ocp2scp1_hwmod = {
+	.name		= "ocp2scp1",
+	.class		= &dra7xx_ocp2scp_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.main_clk	= "l4_root_clk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3INIT_OCP2SCP1_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3INIT_OCP2SCP1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/*
+ * 'qspi' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_qspi_sysc = {
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE,
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class dra7xx_qspi_hwmod_class = {
+	.name	= "qspi",
+	.sysc	= &dra7xx_qspi_sysc,
+};
+
+/* qspi */
+static struct omap_hwmod dra7xx_qspi_hwmod = {
+	.name		= "qspi",
+	.class		= &dra7xx_qspi_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.main_clk	= "qspi_gfclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER2_QSPI_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER2_QSPI_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'sata' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_sata_sysc = {
+	.sysc_offs	= 0x0000,
+	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class dra7xx_sata_hwmod_class = {
+	.name	= "sata",
+	.sysc	= &dra7xx_sata_sysc,
+};
+
+/* sata */
+static struct omap_hwmod_opt_clk sata_opt_clks[] = {
+	{ .role = "ref_clk", .clk = "sata_ref_clk" },
+};
+
+static struct omap_hwmod dra7xx_sata_hwmod = {
+	.name		= "sata",
+	.class		= &dra7xx_sata_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
+	.main_clk	= "func_48m_fclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3INIT_SATA_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3INIT_SATA_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= sata_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(sata_opt_clks),
+};
+
+/*
+ * 'smartreflex' class
+ *
+ */
+
+/* The IP is not compliant to type1 / type2 scheme */
+static struct omap_hwmod_sysc_fields omap_hwmod_sysc_type_smartreflex = {
+	.sidle_shift	= 24,
+	.enwkup_shift	= 26,
+};
+
+static struct omap_hwmod_class_sysconfig dra7xx_smartreflex_sysc = {
+	.sysc_offs	= 0x0038,
+	.sysc_flags	= (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type_smartreflex,
+};
+
+static struct omap_hwmod_class dra7xx_smartreflex_hwmod_class = {
+	.name	= "smartreflex",
+	.sysc	= &dra7xx_smartreflex_sysc,
+	.rev	= 2,
+};
+
+/* smartreflex_core */
+/* smartreflex_core dev_attr */
+static struct omap_smartreflex_dev_attr smartreflex_core_dev_attr = {
+	.sensor_voltdm_name	= "core",
+};
+
+static struct omap_hwmod dra7xx_smartreflex_core_hwmod = {
+	.name		= "smartreflex_core",
+	.class		= &dra7xx_smartreflex_hwmod_class,
+	.clkdm_name	= "coreaon_clkdm",
+	.main_clk	= "wkupaon_iclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_COREAON_SMARTREFLEX_CORE_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_COREAON_SMARTREFLEX_CORE_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &smartreflex_core_dev_attr,
+};
+
+/* smartreflex_mpu */
+/* smartreflex_mpu dev_attr */
+static struct omap_smartreflex_dev_attr smartreflex_mpu_dev_attr = {
+	.sensor_voltdm_name	= "mpu",
+};
+
+static struct omap_hwmod dra7xx_smartreflex_mpu_hwmod = {
+	.name		= "smartreflex_mpu",
+	.class		= &dra7xx_smartreflex_hwmod_class,
+	.clkdm_name	= "coreaon_clkdm",
+	.main_clk	= "wkupaon_iclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_COREAON_SMARTREFLEX_MPU_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_COREAON_SMARTREFLEX_MPU_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &smartreflex_mpu_dev_attr,
+};
+
+/*
+ * 'spinlock' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_spinlock_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dra7xx_spinlock_hwmod_class = {
+	.name	= "spinlock",
+	.sysc	= &dra7xx_spinlock_sysc,
+};
+
+/* spinlock */
+static struct omap_hwmod dra7xx_spinlock_hwmod = {
+	.name		= "spinlock",
+	.class		= &dra7xx_spinlock_hwmod_class,
+	.clkdm_name	= "l4cfg_clkdm",
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4CFG_SPINLOCK_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4CFG_SPINLOCK_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/*
+ * 'timer' class
+ *
+ * This class contains several variants: ['timer_1ms', 'timer_secure',
+ * 'timer']
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_timer_1ms_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class dra7xx_timer_1ms_hwmod_class = {
+	.name	= "timer",
+	.sysc	= &dra7xx_timer_1ms_sysc,
+};
+
+static struct omap_hwmod_class_sysconfig dra7xx_timer_secure_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class dra7xx_timer_secure_hwmod_class = {
+	.name	= "timer",
+	.sysc	= &dra7xx_timer_secure_sysc,
+};
+
+static struct omap_hwmod_class_sysconfig dra7xx_timer_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class dra7xx_timer_hwmod_class = {
+	.name	= "timer",
+	.sysc	= &dra7xx_timer_sysc,
+};
+
+/* timer1 */
+static struct omap_hwmod dra7xx_timer1_hwmod = {
+	.name		= "timer1",
+	.class		= &dra7xx_timer_1ms_hwmod_class,
+	.clkdm_name	= "wkupaon_clkdm",
+	.main_clk	= "timer1_gfclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_WKUPAON_TIMER1_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_WKUPAON_TIMER1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* timer2 */
+static struct omap_hwmod dra7xx_timer2_hwmod = {
+	.name		= "timer2",
+	.class		= &dra7xx_timer_1ms_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "timer2_gfclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_TIMER2_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_TIMER2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* timer3 */
+static struct omap_hwmod dra7xx_timer3_hwmod = {
+	.name		= "timer3",
+	.class		= &dra7xx_timer_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "timer3_gfclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_TIMER3_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_TIMER3_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* timer4 */
+static struct omap_hwmod dra7xx_timer4_hwmod = {
+	.name		= "timer4",
+	.class		= &dra7xx_timer_secure_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "timer4_gfclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_TIMER4_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_TIMER4_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* timer5 */
+static struct omap_hwmod dra7xx_timer5_hwmod = {
+	.name		= "timer5",
+	.class		= &dra7xx_timer_hwmod_class,
+	.clkdm_name	= "ipu_clkdm",
+	.main_clk	= "timer5_gfclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_IPU_TIMER5_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_IPU_TIMER5_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* timer6 */
+static struct omap_hwmod dra7xx_timer6_hwmod = {
+	.name		= "timer6",
+	.class		= &dra7xx_timer_hwmod_class,
+	.clkdm_name	= "ipu_clkdm",
+	.main_clk	= "timer6_gfclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_IPU_TIMER6_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_IPU_TIMER6_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* timer7 */
+static struct omap_hwmod dra7xx_timer7_hwmod = {
+	.name		= "timer7",
+	.class		= &dra7xx_timer_hwmod_class,
+	.clkdm_name	= "ipu_clkdm",
+	.main_clk	= "timer7_gfclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_IPU_TIMER7_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_IPU_TIMER7_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* timer8 */
+static struct omap_hwmod dra7xx_timer8_hwmod = {
+	.name		= "timer8",
+	.class		= &dra7xx_timer_hwmod_class,
+	.clkdm_name	= "ipu_clkdm",
+	.main_clk	= "timer8_gfclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_IPU_TIMER8_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_IPU_TIMER8_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* timer9 */
+static struct omap_hwmod dra7xx_timer9_hwmod = {
+	.name		= "timer9",
+	.class		= &dra7xx_timer_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "timer9_gfclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_TIMER9_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_TIMER9_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* timer10 */
+static struct omap_hwmod dra7xx_timer10_hwmod = {
+	.name		= "timer10",
+	.class		= &dra7xx_timer_1ms_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "timer10_gfclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_TIMER10_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_TIMER10_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* timer11 */
+static struct omap_hwmod dra7xx_timer11_hwmod = {
+	.name		= "timer11",
+	.class		= &dra7xx_timer_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "timer11_gfclk_mux",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_TIMER11_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_TIMER11_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'uart' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_uart_sysc = {
+	.rev_offs	= 0x0050,
+	.sysc_offs	= 0x0054,
+	.syss_offs	= 0x0058,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			   SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dra7xx_uart_hwmod_class = {
+	.name	= "uart",
+	.sysc	= &dra7xx_uart_sysc,
+};
+
+/* uart1 */
+static struct omap_hwmod dra7xx_uart1_hwmod = {
+	.name		= "uart1",
+	.class		= &dra7xx_uart_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "uart1_gfclk_mux",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_UART1_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_UART1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* uart2 */
+static struct omap_hwmod dra7xx_uart2_hwmod = {
+	.name		= "uart2",
+	.class		= &dra7xx_uart_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "uart2_gfclk_mux",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_UART2_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_UART2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* uart3 */
+static struct omap_hwmod dra7xx_uart3_hwmod = {
+	.name		= "uart3",
+	.class		= &dra7xx_uart_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "uart3_gfclk_mux",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_UART3_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_UART3_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* uart4 */
+static struct omap_hwmod dra7xx_uart4_hwmod = {
+	.name		= "uart4",
+	.class		= &dra7xx_uart_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "uart4_gfclk_mux",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_UART4_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_UART4_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* uart5 */
+static struct omap_hwmod dra7xx_uart5_hwmod = {
+	.name		= "uart5",
+	.class		= &dra7xx_uart_hwmod_class,
+	.clkdm_name	= "l4per_clkdm",
+	.main_clk	= "uart5_gfclk_mux",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER_UART5_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER_UART5_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* uart6 */
+static struct omap_hwmod dra7xx_uart6_hwmod = {
+	.name		= "uart6",
+	.class		= &dra7xx_uart_hwmod_class,
+	.clkdm_name	= "ipu_clkdm",
+	.main_clk	= "uart6_gfclk_mux",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_IPU_UART6_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_IPU_UART6_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'usb_otg_ss' class
+ *
+ */
+
+static struct omap_hwmod_class dra7xx_usb_otg_ss_hwmod_class = {
+	.name	= "usb_otg_ss",
+};
+
+/* usb_otg_ss1 */
+static struct omap_hwmod_opt_clk usb_otg_ss1_opt_clks[] = {
+	{ .role = "refclk960m", .clk = "usb_otg_ss1_refclk960m" },
+};
+
+static struct omap_hwmod dra7xx_usb_otg_ss1_hwmod = {
+	.name		= "usb_otg_ss1",
+	.class		= &dra7xx_usb_otg_ss_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.main_clk	= "dpll_core_h13x2_ck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS1_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3INIT_USB_OTG_SS1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+	.opt_clks	= usb_otg_ss1_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(usb_otg_ss1_opt_clks),
+};
+
+/* usb_otg_ss2 */
+static struct omap_hwmod_opt_clk usb_otg_ss2_opt_clks[] = {
+	{ .role = "refclk960m", .clk = "usb_otg_ss2_refclk960m" },
+};
+
+static struct omap_hwmod dra7xx_usb_otg_ss2_hwmod = {
+	.name		= "usb_otg_ss2",
+	.class		= &dra7xx_usb_otg_ss_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.main_clk	= "dpll_core_h13x2_ck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS2_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3INIT_USB_OTG_SS2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+	.opt_clks	= usb_otg_ss2_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(usb_otg_ss2_opt_clks),
+};
+
+/* usb_otg_ss3 */
+static struct omap_hwmod dra7xx_usb_otg_ss3_hwmod = {
+	.name		= "usb_otg_ss3",
+	.class		= &dra7xx_usb_otg_ss_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.main_clk	= "dpll_core_h13x2_ck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS3_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3INIT_USB_OTG_SS3_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/* usb_otg_ss4 */
+static struct omap_hwmod dra7xx_usb_otg_ss4_hwmod = {
+	.name		= "usb_otg_ss4",
+	.class		= &dra7xx_usb_otg_ss_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.main_clk	= "dpll_core_h13x2_ck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS4_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3INIT_USB_OTG_SS4_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/*
+ * 'vcp' class
+ *
+ */
+
+static struct omap_hwmod_class dra7xx_vcp_hwmod_class = {
+	.name	= "vcp",
+};
+
+/* vcp1 */
+static struct omap_hwmod dra7xx_vcp1_hwmod = {
+	.name		= "vcp1",
+	.class		= &dra7xx_vcp_hwmod_class,
+	.clkdm_name	= "l3main1_clkdm",
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3MAIN1_VCP1_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3MAIN1_VCP1_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/* vcp2 */
+static struct omap_hwmod dra7xx_vcp2_hwmod = {
+	.name		= "vcp2",
+	.class		= &dra7xx_vcp_hwmod_class,
+	.clkdm_name	= "l3main1_clkdm",
+	.main_clk	= "l3_iclk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L3MAIN1_VCP2_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3MAIN1_VCP2_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/*
+ * 'wd_timer' class
+ *
+ */
+
+static struct omap_hwmod_class_sysconfig dra7xx_wd_timer_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dra7xx_wd_timer_hwmod_class = {
+	.name		= "wd_timer",
+	.sysc		= &dra7xx_wd_timer_sysc,
+	.pre_shutdown	= &omap2_wd_timer_disable,
+	.reset		= &omap2_wd_timer_reset,
+};
+
+/* wd_timer2 */
+static struct omap_hwmod dra7xx_wd_timer2_hwmod = {
+	.name		= "wd_timer2",
+	.class		= &dra7xx_wd_timer_hwmod_class,
+	.clkdm_name	= "wkupaon_clkdm",
+	.main_clk	= "sys_32k_ck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_WKUPAON_WD_TIMER2_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_WKUPAON_WD_TIMER2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+
+/*
+ * Interfaces
+ */
+
+/* l3_main_2 -> l3_instr */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_2__l3_instr = {
+	.master		= &dra7xx_l3_main_2_hwmod,
+	.slave		= &dra7xx_l3_instr_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> l3_main_1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__l3_main_1 = {
+	.master		= &dra7xx_l4_cfg_hwmod,
+	.slave		= &dra7xx_l3_main_1_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mpu -> l3_main_1 */
+static struct omap_hwmod_ocp_if dra7xx_mpu__l3_main_1 = {
+	.master		= &dra7xx_mpu_hwmod,
+	.slave		= &dra7xx_l3_main_1_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU,
+};
+
+/* l3_main_1 -> l3_main_2 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l3_main_2 = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_l3_main_2_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU,
+};
+
+/* l4_cfg -> l3_main_2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__l3_main_2 = {
+	.master		= &dra7xx_l4_cfg_hwmod,
+	.slave		= &dra7xx_l3_main_2_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> l4_cfg */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_cfg = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_l4_cfg_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> l4_per1 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_per1 = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_l4_per1_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> l4_per2 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_per2 = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_l4_per2_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> l4_per3 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_per3 = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_l4_per3_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> l4_wkup */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_wkup = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_l4_wkup_hwmod,
+	.clk		= "wkupaon_iclk_mux",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per2 -> atl */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__atl = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_atl_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> bb2d */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__bb2d = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_bb2d_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> counter_32k */
+static struct omap_hwmod_ocp_if dra7xx_l4_wkup__counter_32k = {
+	.master		= &dra7xx_l4_wkup_hwmod,
+	.slave		= &dra7xx_counter_32k_hwmod,
+	.clk		= "wkupaon_iclk_mux",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> ctrl_module_wkup */
+static struct omap_hwmod_ocp_if dra7xx_l4_wkup__ctrl_module_wkup = {
+	.master		= &dra7xx_l4_wkup_hwmod,
+	.slave		= &dra7xx_ctrl_module_wkup_hwmod,
+	.clk		= "wkupaon_iclk_mux",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> dcan1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_wkup__dcan1 = {
+	.master		= &dra7xx_l4_wkup_hwmod,
+	.slave		= &dra7xx_dcan1_hwmod,
+	.clk		= "wkupaon_iclk_mux",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per2 -> dcan2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__dcan2 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_dcan2_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space dra7xx_dma_system_addrs[] = {
+	{
+		.pa_start	= 0x4a056000,
+		.pa_end		= 0x4a056fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_cfg -> dma_system */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__dma_system = {
+	.master		= &dra7xx_l4_cfg_hwmod,
+	.slave		= &dra7xx_dma_system_hwmod,
+	.clk		= "l3_iclk_div",
+	.addr		= dra7xx_dma_system_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space dra7xx_dss_addrs[] = {
+	{
+		.name		= "family",
+		.pa_start	= 0x58000000,
+		.pa_end		= 0x5800007f,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l3_main_1 -> dss */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__dss = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_dss_hwmod,
+	.clk		= "l3_iclk_div",
+	.addr		= dra7xx_dss_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space dra7xx_dss_dispc_addrs[] = {
+	{
+		.name		= "dispc",
+		.pa_start	= 0x58001000,
+		.pa_end		= 0x58001fff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l3_main_1 -> dispc */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__dispc = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_dss_dispc_hwmod,
+	.clk		= "l3_iclk_div",
+	.addr		= dra7xx_dss_dispc_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space dra7xx_dss_hdmi_addrs[] = {
+	{
+		.name		= "hdmi_wp",
+		.pa_start	= 0x58040000,
+		.pa_end		= 0x580400ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l3_main_1 -> dispc */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__hdmi = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_dss_hdmi_hwmod,
+	.clk		= "l3_iclk_div",
+	.addr		= dra7xx_dss_hdmi_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space dra7xx_elm_addrs[] = {
+	{
+		.pa_start	= 0x48078000,
+		.pa_end		= 0x48078fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per1 -> elm */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__elm = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_elm_hwmod,
+	.clk		= "l3_iclk_div",
+	.addr		= dra7xx_elm_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> gpio1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_wkup__gpio1 = {
+	.master		= &dra7xx_l4_wkup_hwmod,
+	.slave		= &dra7xx_gpio1_hwmod,
+	.clk		= "wkupaon_iclk_mux",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> gpio2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio2 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_gpio2_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> gpio3 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio3 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_gpio3_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> gpio4 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio4 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_gpio4_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> gpio5 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio5 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_gpio5_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> gpio6 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio6 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_gpio6_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> gpio7 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio7 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_gpio7_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> gpio8 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio8 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_gpio8_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space dra7xx_gpmc_addrs[] = {
+	{
+		.pa_start	= 0x50000000,
+		.pa_end		= 0x500003ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l3_main_1 -> gpmc */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__gpmc = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_gpmc_hwmod,
+	.clk		= "l3_iclk_div",
+	.addr		= dra7xx_gpmc_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space dra7xx_hdq1w_addrs[] = {
+	{
+		.pa_start	= 0x480b2000,
+		.pa_end		= 0x480b201f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_per1 -> hdq1w */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__hdq1w = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_hdq1w_hwmod,
+	.clk		= "l3_iclk_div",
+	.addr		= dra7xx_hdq1w_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> i2c1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c1 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_i2c1_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> i2c2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c2 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_i2c2_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> i2c3 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c3 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_i2c3_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> i2c4 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c4 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_i2c4_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> i2c5 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__i2c5 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_i2c5_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> mcspi1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__mcspi1 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_mcspi1_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> mcspi2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__mcspi2 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_mcspi2_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> mcspi3 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__mcspi3 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_mcspi3_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> mcspi4 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__mcspi4 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_mcspi4_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> mmc1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__mmc1 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_mmc1_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> mmc2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__mmc2 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_mmc2_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> mmc3 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__mmc3 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_mmc3_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> mmc4 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__mmc4 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_mmc4_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> mpu */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = {
+	.master		= &dra7xx_l4_cfg_hwmod,
+	.slave		= &dra7xx_mpu_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space dra7xx_ocp2scp1_addrs[] = {
+	{
+		.pa_start	= 0x4a080000,
+		.pa_end		= 0x4a08001f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_cfg -> ocp2scp1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp1 = {
+	.master		= &dra7xx_l4_cfg_hwmod,
+	.slave		= &dra7xx_ocp2scp1_hwmod,
+	.clk		= "l4_root_clk_div",
+	.addr		= dra7xx_ocp2scp1_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space dra7xx_qspi_addrs[] = {
+	{
+		.pa_start	= 0x4b300000,
+		.pa_end		= 0x4b30007f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l3_main_1 -> qspi */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__qspi = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_qspi_hwmod,
+	.clk		= "l3_iclk_div",
+	.addr		= dra7xx_qspi_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space dra7xx_sata_addrs[] = {
+	{
+		.name		= "sysc",
+		.pa_start	= 0x4a141100,
+		.pa_end		= 0x4a141107,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_cfg -> sata */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__sata = {
+	.master		= &dra7xx_l4_cfg_hwmod,
+	.slave		= &dra7xx_sata_hwmod,
+	.clk		= "l3_iclk_div",
+	.addr		= dra7xx_sata_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space dra7xx_smartreflex_core_addrs[] = {
+	{
+		.pa_start	= 0x4a0dd000,
+		.pa_end		= 0x4a0dd07f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_cfg -> smartreflex_core */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__smartreflex_core = {
+	.master		= &dra7xx_l4_cfg_hwmod,
+	.slave		= &dra7xx_smartreflex_core_hwmod,
+	.clk		= "l4_root_clk_div",
+	.addr		= dra7xx_smartreflex_core_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space dra7xx_smartreflex_mpu_addrs[] = {
+	{
+		.pa_start	= 0x4a0d9000,
+		.pa_end		= 0x4a0d907f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_cfg -> smartreflex_mpu */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__smartreflex_mpu = {
+	.master		= &dra7xx_l4_cfg_hwmod,
+	.slave		= &dra7xx_smartreflex_mpu_hwmod,
+	.clk		= "l4_root_clk_div",
+	.addr		= dra7xx_smartreflex_mpu_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space dra7xx_spinlock_addrs[] = {
+	{
+		.pa_start	= 0x4a0f6000,
+		.pa_end		= 0x4a0f6fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+/* l4_cfg -> spinlock */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__spinlock = {
+	.master		= &dra7xx_l4_cfg_hwmod,
+	.slave		= &dra7xx_spinlock_hwmod,
+	.clk		= "l3_iclk_div",
+	.addr		= dra7xx_spinlock_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> timer1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_wkup__timer1 = {
+	.master		= &dra7xx_l4_wkup_hwmod,
+	.slave		= &dra7xx_timer1_hwmod,
+	.clk		= "wkupaon_iclk_mux",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> timer2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer2 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_timer2_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> timer3 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer3 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_timer3_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> timer4 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer4 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_timer4_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> timer5 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer5 = {
+	.master		= &dra7xx_l4_per3_hwmod,
+	.slave		= &dra7xx_timer5_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> timer6 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer6 = {
+	.master		= &dra7xx_l4_per3_hwmod,
+	.slave		= &dra7xx_timer6_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> timer7 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer7 = {
+	.master		= &dra7xx_l4_per3_hwmod,
+	.slave		= &dra7xx_timer7_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> timer8 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__timer8 = {
+	.master		= &dra7xx_l4_per3_hwmod,
+	.slave		= &dra7xx_timer8_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> timer9 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer9 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_timer9_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> timer10 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer10 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_timer10_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> timer11 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__timer11 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_timer11_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> uart1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart1 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_uart1_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> uart2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart2 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_uart2_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> uart3 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart3 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_uart3_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> uart4 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart4 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_uart4_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> uart5 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart5 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_uart5_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per1 -> uart6 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart6 = {
+	.master		= &dra7xx_l4_per1_hwmod,
+	.slave		= &dra7xx_uart6_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> usb_otg_ss1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss1 = {
+	.master		= &dra7xx_l4_per3_hwmod,
+	.slave		= &dra7xx_usb_otg_ss1_hwmod,
+	.clk		= "dpll_core_h13x2_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> usb_otg_ss2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss2 = {
+	.master		= &dra7xx_l4_per3_hwmod,
+	.slave		= &dra7xx_usb_otg_ss2_hwmod,
+	.clk		= "dpll_core_h13x2_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> usb_otg_ss3 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss3 = {
+	.master		= &dra7xx_l4_per3_hwmod,
+	.slave		= &dra7xx_usb_otg_ss3_hwmod,
+	.clk		= "dpll_core_h13x2_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per3 -> usb_otg_ss4 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss4 = {
+	.master		= &dra7xx_l4_per3_hwmod,
+	.slave		= &dra7xx_usb_otg_ss4_hwmod,
+	.clk		= "dpll_core_h13x2_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> vcp1 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__vcp1 = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_vcp1_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per2 -> vcp1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__vcp1 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_vcp1_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> vcp2 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__vcp2 = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_vcp2_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per2 -> vcp2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__vcp2 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_vcp2_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> wd_timer2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_wkup__wd_timer2 = {
+	.master		= &dra7xx_l4_wkup_hwmod,
+	.slave		= &dra7xx_wd_timer2_hwmod,
+	.clk		= "wkupaon_iclk_mux",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
+	&dra7xx_l3_main_2__l3_instr,
+	&dra7xx_l4_cfg__l3_main_1,
+	&dra7xx_mpu__l3_main_1,
+	&dra7xx_l3_main_1__l3_main_2,
+	&dra7xx_l4_cfg__l3_main_2,
+	&dra7xx_l3_main_1__l4_cfg,
+	&dra7xx_l3_main_1__l4_per1,
+	&dra7xx_l3_main_1__l4_per2,
+	&dra7xx_l3_main_1__l4_per3,
+	&dra7xx_l3_main_1__l4_wkup,
+	&dra7xx_l4_per2__atl,
+	&dra7xx_l3_main_1__bb2d,
+	&dra7xx_l4_wkup__counter_32k,
+	&dra7xx_l4_wkup__ctrl_module_wkup,
+	&dra7xx_l4_wkup__dcan1,
+	&dra7xx_l4_per2__dcan2,
+	&dra7xx_l4_cfg__dma_system,
+	&dra7xx_l3_main_1__dss,
+	&dra7xx_l3_main_1__dispc,
+	&dra7xx_l3_main_1__hdmi,
+	&dra7xx_l4_per1__elm,
+	&dra7xx_l4_wkup__gpio1,
+	&dra7xx_l4_per1__gpio2,
+	&dra7xx_l4_per1__gpio3,
+	&dra7xx_l4_per1__gpio4,
+	&dra7xx_l4_per1__gpio5,
+	&dra7xx_l4_per1__gpio6,
+	&dra7xx_l4_per1__gpio7,
+	&dra7xx_l4_per1__gpio8,
+	&dra7xx_l3_main_1__gpmc,
+	&dra7xx_l4_per1__hdq1w,
+	&dra7xx_l4_per1__i2c1,
+	&dra7xx_l4_per1__i2c2,
+	&dra7xx_l4_per1__i2c3,
+	&dra7xx_l4_per1__i2c4,
+	&dra7xx_l4_per1__i2c5,
+	&dra7xx_l4_per1__mcspi1,
+	&dra7xx_l4_per1__mcspi2,
+	&dra7xx_l4_per1__mcspi3,
+	&dra7xx_l4_per1__mcspi4,
+	&dra7xx_l4_per1__mmc1,
+	&dra7xx_l4_per1__mmc2,
+	&dra7xx_l4_per1__mmc3,
+	&dra7xx_l4_per1__mmc4,
+	&dra7xx_l4_cfg__mpu,
+	&dra7xx_l4_cfg__ocp2scp1,
+	&dra7xx_l3_main_1__qspi,
+	&dra7xx_l4_cfg__sata,
+	&dra7xx_l4_cfg__smartreflex_core,
+	&dra7xx_l4_cfg__smartreflex_mpu,
+	&dra7xx_l4_cfg__spinlock,
+	&dra7xx_l4_wkup__timer1,
+	&dra7xx_l4_per1__timer2,
+	&dra7xx_l4_per1__timer3,
+	&dra7xx_l4_per1__timer4,
+	&dra7xx_l4_per3__timer5,
+	&dra7xx_l4_per3__timer6,
+	&dra7xx_l4_per3__timer7,
+	&dra7xx_l4_per3__timer8,
+	&dra7xx_l4_per1__timer9,
+	&dra7xx_l4_per1__timer10,
+	&dra7xx_l4_per1__timer11,
+	&dra7xx_l4_per1__uart1,
+	&dra7xx_l4_per1__uart2,
+	&dra7xx_l4_per1__uart3,
+	&dra7xx_l4_per1__uart4,
+	&dra7xx_l4_per1__uart5,
+	&dra7xx_l4_per1__uart6,
+	&dra7xx_l4_per3__usb_otg_ss1,
+	&dra7xx_l4_per3__usb_otg_ss2,
+	&dra7xx_l4_per3__usb_otg_ss3,
+	&dra7xx_l4_per3__usb_otg_ss4,
+	&dra7xx_l3_main_1__vcp1,
+	&dra7xx_l4_per2__vcp1,
+	&dra7xx_l3_main_1__vcp2,
+	&dra7xx_l4_per2__vcp2,
+	&dra7xx_l4_wkup__wd_timer2,
+	NULL,
+};
+
+int __init dra7xx_hwmod_init(void)
+{
+	omap_hwmod_init();
+	return omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs);
+}
diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c
index bd41d59..82fd8c7 100644
--- a/arch/arm/mach-omap2/opp.c
+++ b/arch/arm/mach-omap2/opp.c
@@ -17,6 +17,7 @@
  * GNU General Public License for more details.
  */
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/opp.h>
 #include <linux/cpu.h>
 
@@ -40,6 +41,9 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def,
 {
 	int i, r;
 
+	if (of_have_populated_dt())
+		return -EINVAL;
+
 	if (!opp_def || !opp_def_size) {
 		pr_err("%s: invalid params!\n", __func__);
 		return -EINVAL;
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
new file mode 100644
index 0000000..10c7145
--- /dev/null
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -0,0 +1,174 @@
+/*
+ * Legacy platform_data quirks
+ *
+ * Copyright (C) 2013 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <linux/wl12xx.h>
+
+#include <linux/platform_data/pinctrl-single.h>
+
+#include "common.h"
+#include "common-board-devices.h"
+#include "dss-common.h"
+#include "control.h"
+
+struct pdata_init {
+	const char *compatible;
+	void (*fn)(void);
+};
+
+/*
+ * Create alias for USB host PHY clock.
+ * Remove this when clock phandle can be provided via DT
+ */
+static void __init __used legacy_init_ehci_clk(char *clkname)
+{
+	int ret;
+
+	ret = clk_add_alias("main_clk", NULL, clkname, NULL);
+	if (ret)
+		pr_err("%s:Failed to add main_clk alias to %s :%d\n",
+		       __func__, clkname, ret);
+}
+
+#if IS_ENABLED(CONFIG_WL12XX)
+
+static struct wl12xx_platform_data wl12xx __initdata;
+
+static void __init __used legacy_init_wl12xx(unsigned ref_clock,
+					     unsigned tcxo_clock,
+					     int gpio)
+{
+	int res;
+
+	wl12xx.board_ref_clock = ref_clock;
+	wl12xx.board_tcxo_clock = tcxo_clock;
+	wl12xx.irq = gpio_to_irq(gpio);
+
+	res = wl12xx_set_platform_data(&wl12xx);
+	if (res) {
+		pr_err("error setting wl12xx data: %d\n", res);
+		return;
+	}
+}
+#else
+static inline void legacy_init_wl12xx(unsigned ref_clock,
+				      unsigned tcxo_clock,
+				      int gpio)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static void __init hsmmc2_internal_input_clk(void)
+{
+	u32 reg;
+
+	reg = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1);
+	reg |= OMAP2_MMCSDIO2ADPCLKISEL;
+	omap_ctrl_writel(reg, OMAP343X_CONTROL_DEVCONF1);
+}
+
+static void __init omap3_igep0020_legacy_init(void)
+{
+	omap3_igep2_display_init_of();
+}
+
+static void __init omap3_evm_legacy_init(void)
+{
+	legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 149);
+}
+
+static void __init omap3_zoom_legacy_init(void)
+{
+	legacy_init_wl12xx(WL12XX_REFCLOCK_26, 0, 162);
+}
+#endif /* CONFIG_ARCH_OMAP3 */
+
+#ifdef CONFIG_ARCH_OMAP4
+static void __init omap4_sdp_legacy_init(void)
+{
+	omap_4430sdp_display_init_of();
+	legacy_init_wl12xx(WL12XX_REFCLOCK_26,
+			   WL12XX_TCXOCLOCK_26, 53);
+}
+
+static void __init omap4_panda_legacy_init(void)
+{
+	omap4_panda_display_init_of();
+	legacy_init_ehci_clk("auxclk3_ck");
+	legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 53);
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAP5
+static void __init omap5_uevm_legacy_init(void)
+{
+	legacy_init_ehci_clk("auxclk1_ck");
+}
+#endif
+
+static struct pcs_pdata pcs_pdata;
+
+void omap_pcs_legacy_init(int irq, void (*rearm)(void))
+{
+	pcs_pdata.irq = irq;
+	pcs_pdata.rearm = rearm;
+}
+
+struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
+#ifdef CONFIG_ARCH_OMAP3
+	OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata),
+	OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002a00, "48002a00.pinmux", &pcs_pdata),
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata),
+	OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata),
+#endif
+	{ /* sentinel */ },
+};
+
+static struct pdata_init pdata_quirks[] __initdata = {
+#ifdef CONFIG_ARCH_OMAP3
+	{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
+	{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
+	{ "isee,omap3-igep0020", omap3_igep0020_legacy_init, },
+	{ "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
+	{ "ti,omap3-zoom3", omap3_zoom_legacy_init, },
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	{ "ti,omap4-sdp", omap4_sdp_legacy_init, },
+	{ "ti,omap4-panda", omap4_panda_legacy_init, },
+#endif
+#ifdef CONFIG_SOC_OMAP5
+	{ "ti,omap5-uevm", omap5_uevm_legacy_init, },
+#endif
+	{ /* sentinel */ },
+};
+
+void __init pdata_quirks_init(struct of_device_id *omap_dt_match_table)
+{
+	struct pdata_init *quirks = pdata_quirks;
+
+	omap_sdrc_init(NULL, NULL);
+	of_platform_populate(NULL, omap_dt_match_table,
+			     omap_auxdata_lookup, NULL);
+
+	while (quirks->compatible) {
+		if (of_machine_is_compatible(quirks->compatible)) {
+			if (quirks->fn)
+				quirks->fn();
+			break;
+		}
+		quirks++;
+	}
+}
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index e742118..360b2da 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -266,7 +266,12 @@ static void __init omap4_init_voltages(void)
 
 static inline void omap_init_cpufreq(void)
 {
-	struct platform_device_info devinfo = { .name = "omap-cpufreq", };
+	struct platform_device_info devinfo = { };
+
+	if (!of_have_populated_dt())
+		devinfo.name = "omap-cpufreq";
+	else
+		devinfo.name = "cpufreq-cpu0";
 	platform_device_register_full(&devinfo);
 }
 
@@ -300,10 +305,11 @@ int __init omap2_common_pm_late_init(void)
 		/* Smartreflex device init */
 		omap_devinit_smartreflex();
 
-		/* cpufreq dummy device instantiation */
-		omap_init_cpufreq();
 	}
 
+	/* cpufreq dummy device instantiation */
+	omap_init_cpufreq();
+
 #ifdef CONFIG_SUSPEND
 	suspend_set_ops(&omap_pm_ops);
 #endif
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index ce956b0..8c07594 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -62,16 +62,6 @@ static struct clockdomain *dsp_clkdm, *mpu_clkdm, *wkup_clkdm, *gfx_clkdm;
 
 static struct clk *osc_ck, *emul_ck;
 
-static int omap2_fclks_active(void)
-{
-	u32 f1, f2;
-
-	f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
-	f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
-
-	return (f1 | f2) ? 1 : 0;
-}
-
 static int omap2_enter_full_retention(void)
 {
 	u32 l;
@@ -142,17 +132,7 @@ static int sti_console_enabled;
 
 static int omap2_allow_mpu_retention(void)
 {
-	u32 l;
-
-	/* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
-	l = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
-	if (l & (OMAP2420_EN_MMC_MASK | OMAP24XX_EN_UART2_MASK |
-		 OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_MCSPI2_MASK |
-		 OMAP24XX_EN_MCSPI1_MASK | OMAP24XX_EN_DSS1_MASK))
-		return 0;
-	/* Check for UART3. */
-	l = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
-	if (l & OMAP24XX_EN_UART3_MASK)
+	if (!omap2xxx_cm_mpu_retention_allowed())
 		return 0;
 	if (sti_console_enabled)
 		return 0;
@@ -188,7 +168,7 @@ static void omap2_enter_mpu_retention(void)
 
 static int omap2_can_sleep(void)
 {
-	if (omap2_fclks_active())
+	if (omap2xxx_cm_fclks_active())
 		return 0;
 	if (__clk_is_enabled(osc_ck))
 		return 0;
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 5a2d803..93b80e5 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -430,8 +430,7 @@ static void __init omap3_iva_idle(void)
 			 OMAP3430_IVA2_MOD, CM_FCLKEN);
 
 	/* Set IVA2 boot mode to 'idle' */
-	omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
-			 OMAP343X_CONTROL_IVA2_BOOTMOD);
+	omap3_ctrl_set_iva_bootmode_idle();
 
 	/* Un-reset IVA2 */
 	omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index e4d7bd6..da5a59a 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -256,6 +256,8 @@ extern void omap3xxx_powerdomains_init(void);
 extern void am33xx_powerdomains_init(void);
 extern void omap44xx_powerdomains_init(void);
 extern void omap54xx_powerdomains_init(void);
+extern void dra7xx_powerdomains_init(void);
+void am43xx_powerdomains_init(void);
 
 extern struct pwrdm_ops omap2_pwrdm_operations;
 extern struct pwrdm_ops omap3_pwrdm_operations;
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index e2d4bd8..328c103 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -336,6 +336,13 @@ static struct powerdomain dpll5_pwrdm = {
 	.voltdm		  = { .name = "core" },
 };
 
+static struct powerdomain alwon_81xx_pwrdm = {
+	.name		  = "alwon_pwrdm",
+	.prcm_offs	  = TI81XX_PRM_ALWON_MOD,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.voltdm		  = { .name = "core" },
+};
+
 static struct powerdomain device_81xx_pwrdm = {
 	.name		  = "device_pwrdm",
 	.prcm_offs	  = TI81XX_PRM_DEVICE_MOD,
@@ -442,6 +449,7 @@ static struct powerdomain *powerdomains_am35x[] __initdata = {
 };
 
 static struct powerdomain *powerdomains_ti81xx[] __initdata = {
+	&alwon_81xx_pwrdm,
 	&device_81xx_pwrdm,
 	&active_816x_pwrdm,
 	&default_816x_pwrdm,
diff --git a/arch/arm/mach-omap2/powerdomains43xx_data.c b/arch/arm/mach-omap2/powerdomains43xx_data.c
new file mode 100644
index 0000000..95fee54
--- /dev/null
+++ b/arch/arm/mach-omap2/powerdomains43xx_data.c
@@ -0,0 +1,136 @@
+/*
+ * AM43xx Power domains framework
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include "powerdomain.h"
+
+#include "prcm-common.h"
+#include "prcm44xx.h"
+#include "prcm43xx.h"
+
+static struct powerdomain gfx_43xx_pwrdm = {
+	.name		  = "gfx_pwrdm",
+	.voltdm		  = { .name = "core" },
+	.prcm_offs	  = AM43XX_PRM_GFX_INST,
+	.prcm_partition	  = AM43XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.banks		  = 1,
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_ON,	/* gfx_mem */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+static struct powerdomain mpu_43xx_pwrdm = {
+	.name		  = "mpu_pwrdm",
+	.voltdm		  = { .name = "mpu" },
+	.prcm_offs	  = AM43XX_PRM_MPU_INST,
+	.prcm_partition	  = AM43XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 3,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* mpu_l1 */
+		[1] = PWRSTS_OFF_RET,	/* mpu_l2 */
+		[2] = PWRSTS_OFF_RET,	/* mpu_ram */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_ON,	/* mpu_l1 */
+		[1] = PWRSTS_ON,	/* mpu_l2 */
+		[2] = PWRSTS_ON,	/* mpu_ram */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+static struct powerdomain rtc_43xx_pwrdm = {
+	.name		  = "rtc_pwrdm",
+	.voltdm		  = { .name = "rtc" },
+	.prcm_offs	  = AM43XX_PRM_RTC_INST,
+	.prcm_partition	  = AM43XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_ON,
+};
+
+static struct powerdomain wkup_43xx_pwrdm = {
+	.name		  = "wkup_pwrdm",
+	.voltdm		  = { .name = "core" },
+	.prcm_offs	  = AM43XX_PRM_WKUP_INST,
+	.prcm_partition	  = AM43XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_ON,
+	.banks		  = 1,
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_ON,	/* debugss_mem */
+	},
+};
+
+static struct powerdomain tamper_43xx_pwrdm = {
+	.name		  = "tamper_pwrdm",
+	.voltdm		  = { .name = "tamper" },
+	.prcm_offs	  = AM43XX_PRM_TAMPER_INST,
+	.prcm_partition	  = AM43XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_ON,
+};
+
+static struct powerdomain cefuse_43xx_pwrdm = {
+	.name		  = "cefuse_pwrdm",
+	.voltdm		  = { .name = "core" },
+	.prcm_offs	  = AM43XX_PRM_CEFUSE_INST,
+	.prcm_partition	  = AM43XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+static struct powerdomain per_43xx_pwrdm = {
+	.name		  = "per_pwrdm",
+	.voltdm		  = { .name = "core" },
+	.prcm_offs	  = AM43XX_PRM_PER_INST,
+	.prcm_partition	  = AM43XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 4,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* icss_mem */
+		[1] = PWRSTS_OFF_RET,	/* per_mem */
+		[2] = PWRSTS_OFF_RET,	/* ram1_mem */
+		[3] = PWRSTS_OFF_RET,	/* ram2_mem */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_ON,	/* icss_mem */
+		[1] = PWRSTS_ON,	/* per_mem */
+		[2] = PWRSTS_ON,	/* ram1_mem */
+		[3] = PWRSTS_ON,	/* ram2_mem */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+static struct powerdomain *powerdomains_am43xx[] __initdata = {
+	&gfx_43xx_pwrdm,
+	&mpu_43xx_pwrdm,
+	&rtc_43xx_pwrdm,
+	&wkup_43xx_pwrdm,
+	&tamper_43xx_pwrdm,
+	&cefuse_43xx_pwrdm,
+	&per_43xx_pwrdm,
+	NULL
+};
+
+static int am43xx_check_vcvp(void)
+{
+	return 0;
+}
+
+void __init am43xx_powerdomains_init(void)
+{
+	omap4_pwrdm_operations.pwrdm_has_voltdm = am43xx_check_vcvp;
+	pwrdm_register_platform_funcs(&omap4_pwrdm_operations);
+	pwrdm_register_pwrdms(powerdomains_am43xx);
+	pwrdm_complete_init();
+}
diff --git a/arch/arm/mach-omap2/powerdomains54xx_data.c b/arch/arm/mach-omap2/powerdomains54xx_data.c
index 81f8a7c..ce1d752 100644
--- a/arch/arm/mach-omap2/powerdomains54xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains54xx_data.c
@@ -25,7 +25,6 @@
 
 #include "prcm-common.h"
 #include "prcm44xx.h"
-#include "prm-regbits-54xx.h"
 #include "prm54xx.h"
 #include "prcm_mpu54xx.h"
 
diff --git a/arch/arm/mach-omap2/powerdomains7xx_data.c b/arch/arm/mach-omap2/powerdomains7xx_data.c
new file mode 100644
index 0000000..48151d1
--- /dev/null
+++ b/arch/arm/mach-omap2/powerdomains7xx_data.c
@@ -0,0 +1,454 @@
+/*
+ * DRA7xx Power domains framework
+ *
+ * Copyright (C) 2009-2013 Texas Instruments, Inc.
+ * Copyright (C) 2009-2011 Nokia Corporation
+ *
+ * Generated by code originally written by:
+ * Abhijit Pagare (abhijitpagare@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ * Paul Walmsley (paul@pwsan.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include "powerdomain.h"
+
+#include "prcm-common.h"
+#include "prcm44xx.h"
+#include "prm7xx.h"
+#include "prcm_mpu7xx.h"
+
+/* iva_7xx_pwrdm: IVA-HD power domain */
+static struct powerdomain iva_7xx_pwrdm = {
+	.name		  = "iva_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_IVA_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF,
+	.banks		  = 4,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* hwa_mem */
+		[1] = PWRSTS_OFF_RET,	/* sl2_mem */
+		[2] = PWRSTS_OFF_RET,	/* tcm1_mem */
+		[3] = PWRSTS_OFF_RET,	/* tcm2_mem */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* hwa_mem */
+		[1] = PWRSTS_OFF_RET,	/* sl2_mem */
+		[2] = PWRSTS_OFF_RET,	/* tcm1_mem */
+		[3] = PWRSTS_OFF_RET,	/* tcm2_mem */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* rtc_7xx_pwrdm:  */
+static struct powerdomain rtc_7xx_pwrdm = {
+	.name		  = "rtc_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_RTC_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_ON,
+};
+
+/* custefuse_7xx_pwrdm: Customer efuse controller power domain */
+static struct powerdomain custefuse_7xx_pwrdm = {
+	.name		  = "custefuse_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_CUSTEFUSE_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* ipu_7xx_pwrdm: Audio back end power domain */
+static struct powerdomain ipu_7xx_pwrdm = {
+	.name		  = "ipu_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_IPU_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF,
+	.banks		  = 2,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* aessmem */
+		[1] = PWRSTS_OFF_RET,	/* periphmem */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* aessmem */
+		[1] = PWRSTS_OFF_RET,	/* periphmem */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* dss_7xx_pwrdm: Display subsystem power domain */
+static struct powerdomain dss_7xx_pwrdm = {
+	.name		  = "dss_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_DSS_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* dss_mem */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* dss_mem */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* l4per_7xx_pwrdm: Target peripherals power domain */
+static struct powerdomain l4per_7xx_pwrdm = {
+	.name		  = "l4per_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_L4PER_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 2,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* nonretained_bank */
+		[1] = PWRSTS_OFF_RET,	/* retained_bank */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* nonretained_bank */
+		[1] = PWRSTS_OFF_RET,	/* retained_bank */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* gpu_7xx_pwrdm: 3D accelerator power domain */
+static struct powerdomain gpu_7xx_pwrdm = {
+	.name		  = "gpu_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_GPU_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* gpu_mem */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* gpu_mem */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* wkupaon_7xx_pwrdm: Wake-up power domain */
+static struct powerdomain wkupaon_7xx_pwrdm = {
+	.name		  = "wkupaon_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_WKUPAON_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_ON,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_ON,	/* wkup_bank */
+	},
+};
+
+/* core_7xx_pwrdm: CORE power domain */
+static struct powerdomain core_7xx_pwrdm = {
+	.name		  = "core_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_CORE_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 5,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* core_nret_bank */
+		[1] = PWRSTS_OFF_RET,	/* core_ocmram */
+		[2] = PWRSTS_OFF_RET,	/* core_other_bank */
+		[3] = PWRSTS_OFF_RET,	/* ipu_l2ram */
+		[4] = PWRSTS_OFF_RET,	/* ipu_unicache */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* core_nret_bank */
+		[1] = PWRSTS_OFF_RET,	/* core_ocmram */
+		[2] = PWRSTS_OFF_RET,	/* core_other_bank */
+		[3] = PWRSTS_OFF_RET,	/* ipu_l2ram */
+		[4] = PWRSTS_OFF_RET,	/* ipu_unicache */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* coreaon_7xx_pwrdm: Always ON logic that sits in VDD_CORE voltage domain */
+static struct powerdomain coreaon_7xx_pwrdm = {
+	.name		  = "coreaon_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_COREAON_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_ON,
+};
+
+/* cpu0_7xx_pwrdm: MPU0 processor and Neon coprocessor power domain */
+static struct powerdomain cpu0_7xx_pwrdm = {
+	.name		  = "cpu0_pwrdm",
+	.prcm_offs	  = DRA7XX_MPU_PRCM_PRM_C0_INST,
+	.prcm_partition	  = DRA7XX_MPU_PRCM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* cpu0_l1 */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_ON,	/* cpu0_l1 */
+	},
+};
+
+/* cpu1_7xx_pwrdm: MPU1 processor and Neon coprocessor power domain */
+static struct powerdomain cpu1_7xx_pwrdm = {
+	.name		  = "cpu1_pwrdm",
+	.prcm_offs	  = DRA7XX_MPU_PRCM_PRM_C1_INST,
+	.prcm_partition	  = DRA7XX_MPU_PRCM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* cpu1_l1 */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_ON,	/* cpu1_l1 */
+	},
+};
+
+/* vpe_7xx_pwrdm:  */
+static struct powerdomain vpe_7xx_pwrdm = {
+	.name		  = "vpe_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_VPE_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* vpe_bank */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* vpe_bank */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* mpu_7xx_pwrdm: Modena processor and the Neon coprocessor power domain */
+static struct powerdomain mpu_7xx_pwrdm = {
+	.name		  = "mpu_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_MPU_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 2,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* mpu_l2 */
+		[1] = PWRSTS_RET,	/* mpu_ram */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* mpu_l2 */
+		[1] = PWRSTS_OFF_RET,	/* mpu_ram */
+	},
+};
+
+/* l3init_7xx_pwrdm: L3 initators pheripherals power domain  */
+static struct powerdomain l3init_7xx_pwrdm = {
+	.name		  = "l3init_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_L3INIT_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_RET_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.banks		  = 3,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* gmac_bank */
+		[1] = PWRSTS_OFF_RET,	/* l3init_bank1 */
+		[2] = PWRSTS_OFF_RET,	/* l3init_bank2 */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* gmac_bank */
+		[1] = PWRSTS_OFF_RET,	/* l3init_bank1 */
+		[2] = PWRSTS_OFF_RET,	/* l3init_bank2 */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* eve3_7xx_pwrdm:  */
+static struct powerdomain eve3_7xx_pwrdm = {
+	.name		  = "eve3_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_EVE3_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* eve3_bank */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* eve3_bank */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* emu_7xx_pwrdm: Emulation power domain */
+static struct powerdomain emu_7xx_pwrdm = {
+	.name		  = "emu_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_EMU_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* emu_bank */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* emu_bank */
+	},
+};
+
+/* dsp2_7xx_pwrdm:  */
+static struct powerdomain dsp2_7xx_pwrdm = {
+	.name		  = "dsp2_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_DSP2_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.banks		  = 3,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* dsp2_edma */
+		[1] = PWRSTS_OFF_RET,	/* dsp2_l1 */
+		[2] = PWRSTS_OFF_RET,	/* dsp2_l2 */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* dsp2_edma */
+		[1] = PWRSTS_OFF_RET,	/* dsp2_l1 */
+		[2] = PWRSTS_OFF_RET,	/* dsp2_l2 */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* dsp1_7xx_pwrdm: Tesla processor power domain */
+static struct powerdomain dsp1_7xx_pwrdm = {
+	.name		  = "dsp1_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_DSP1_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.banks		  = 3,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* dsp1_edma */
+		[1] = PWRSTS_OFF_RET,	/* dsp1_l1 */
+		[2] = PWRSTS_OFF_RET,	/* dsp1_l2 */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* dsp1_edma */
+		[1] = PWRSTS_OFF_RET,	/* dsp1_l1 */
+		[2] = PWRSTS_OFF_RET,	/* dsp1_l2 */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* cam_7xx_pwrdm: Camera subsystem power domain */
+static struct powerdomain cam_7xx_pwrdm = {
+	.name		  = "cam_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_CAM_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* vip_bank */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* vip_bank */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* eve4_7xx_pwrdm:  */
+static struct powerdomain eve4_7xx_pwrdm = {
+	.name		  = "eve4_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_EVE4_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* eve4_bank */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* eve4_bank */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* eve2_7xx_pwrdm:  */
+static struct powerdomain eve2_7xx_pwrdm = {
+	.name		  = "eve2_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_EVE2_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* eve2_bank */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* eve2_bank */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/* eve1_7xx_pwrdm:  */
+static struct powerdomain eve1_7xx_pwrdm = {
+	.name		  = "eve1_pwrdm",
+	.prcm_offs	  = DRA7XX_PRM_EVE1_INST,
+	.prcm_partition	  = DRA7XX_PRM_PARTITION,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.banks		  = 1,
+	.pwrsts_mem_ret	= {
+		[0] = PWRSTS_OFF_RET,	/* eve1_bank */
+	},
+	.pwrsts_mem_on	= {
+		[0] = PWRSTS_OFF_RET,	/* eve1_bank */
+	},
+	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
+};
+
+/*
+ * The following power domains are not under SW control
+ *
+ * mpuaon
+ * mmaon
+ */
+
+/* As powerdomains are added or removed above, this list must also be changed */
+static struct powerdomain *powerdomains_dra7xx[] __initdata = {
+	&iva_7xx_pwrdm,
+	&rtc_7xx_pwrdm,
+	&custefuse_7xx_pwrdm,
+	&ipu_7xx_pwrdm,
+	&dss_7xx_pwrdm,
+	&l4per_7xx_pwrdm,
+	&gpu_7xx_pwrdm,
+	&wkupaon_7xx_pwrdm,
+	&core_7xx_pwrdm,
+	&coreaon_7xx_pwrdm,
+	&cpu0_7xx_pwrdm,
+	&cpu1_7xx_pwrdm,
+	&vpe_7xx_pwrdm,
+	&mpu_7xx_pwrdm,
+	&l3init_7xx_pwrdm,
+	&eve3_7xx_pwrdm,
+	&emu_7xx_pwrdm,
+	&dsp2_7xx_pwrdm,
+	&dsp1_7xx_pwrdm,
+	&cam_7xx_pwrdm,
+	&eve4_7xx_pwrdm,
+	&eve2_7xx_pwrdm,
+	&eve1_7xx_pwrdm,
+	NULL
+};
+
+void __init dra7xx_powerdomains_init(void)
+{
+	pwrdm_register_platform_funcs(&omap4_pwrdm_operations);
+	pwrdm_register_pwrdms(powerdomains_dra7xx);
+	pwrdm_complete_init();
+}
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index ff1ac4a..0e841fd 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -58,6 +58,7 @@
 #define TI816X_PRM_IVAHD1_MOD			0x0d00
 #define TI816X_PRM_IVAHD2_MOD			0x0e00
 #define TI816X_PRM_SGX_MOD				0x0f00
+#define TI81XX_PRM_ALWON_MOD			0x1800
 
 /* 24XX register bits shared between CM & PRM registers */
 
diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
new file mode 100644
index 0000000..7785be9
--- /dev/null
+++ b/arch/arm/mach-omap2/prcm43xx.h
@@ -0,0 +1,146 @@
+/*
+ * AM43x PRCM defines
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_PRCM_43XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRCM_43XX_H
+
+#define AM43XX_PRM_PARTITION				1
+#define AM43XX_CM_PARTITION				1
+
+/* PRM instances */
+#define AM43XX_PRM_OCP_SOCKET_INST			0x0000
+#define AM43XX_PRM_MPU_INST				0x0300
+#define AM43XX_PRM_GFX_INST				0x0400
+#define AM43XX_PRM_RTC_INST				0x0500
+#define AM43XX_PRM_TAMPER_INST				0x0600
+#define AM43XX_PRM_CEFUSE_INST				0x0700
+#define AM43XX_PRM_PER_INST				0x0800
+#define AM43XX_PRM_WKUP_INST				0x2000
+#define AM43XX_PRM_DEVICE_INST				0x4000
+
+/* RM RSTCTRL offsets */
+#define AM43XX_RM_PER_RSTCTRL_OFFSET			0x0010
+#define AM43XX_RM_GFX_RSTCTRL_OFFSET			0x0010
+#define AM43XX_RM_WKUP_RSTCTRL_OFFSET			0x0010
+
+/* RM RSTST offsets */
+#define AM43XX_RM_GFX_RSTST_OFFSET			0x0014
+#define AM43XX_RM_WKUP_RSTST_OFFSET			0x0014
+
+/* CM instances */
+#define AM43XX_CM_WKUP_INST				0x2800
+#define AM43XX_CM_DEVICE_INST				0x4100
+#define AM43XX_CM_DPLL_INST				0x4200
+#define AM43XX_CM_MPU_INST				0x8300
+#define AM43XX_CM_GFX_INST				0x8400
+#define AM43XX_CM_RTC_INST				0x8500
+#define AM43XX_CM_TAMPER_INST				0x8600
+#define AM43XX_CM_CEFUSE_INST				0x8700
+#define AM43XX_CM_PER_INST				0x8800
+
+/* CD offsets */
+#define AM43XX_CM_WKUP_L3_AON_CDOFFS			0x0000
+#define AM43XX_CM_WKUP_L3S_TSC_CDOFFS			0x0100
+#define AM43XX_CM_WKUP_L4_WKUP_AON_CDOFFS		0x0200
+#define AM43XX_CM_WKUP_WKUP_CDOFFS			0x0300
+#define AM43XX_CM_MPU_MPU_CDOFFS			0x0000
+#define AM43XX_CM_GFX_GFX_L3_CDOFFS			0x0000
+#define AM43XX_CM_RTC_RTC_CDOFFS			0x0000
+#define AM43XX_CM_TAMPER_TAMPER_CDOFFS			0x0000
+#define AM43XX_CM_CEFUSE_CEFUSE_CDOFFS			0x0000
+#define AM43XX_CM_PER_L3_CDOFFS				0x0000
+#define AM43XX_CM_PER_L3S_CDOFFS			0x0200
+#define AM43XX_CM_PER_ICSS_CDOFFS			0x0300
+#define AM43XX_CM_PER_L4LS_CDOFFS			0x0400
+#define AM43XX_CM_PER_EMIF_CDOFFS			0x0700
+#define AM43XX_CM_PER_DSS_CDOFFS			0x0a00
+#define AM43XX_CM_PER_CPSW_CDOFFS			0x0b00
+#define AM43XX_CM_PER_OCPWP_L3_CDOFFS			0x0c00
+
+/* CLK CTRL offsets */
+#define AM43XX_CM_PER_UART1_CLKCTRL_OFFSET		0x0580
+#define AM43XX_CM_PER_UART2_CLKCTRL_OFFSET		0x0588
+#define AM43XX_CM_PER_UART3_CLKCTRL_OFFSET		0x0590
+#define AM43XX_CM_PER_UART4_CLKCTRL_OFFSET		0x0598
+#define AM43XX_CM_PER_UART5_CLKCTRL_OFFSET		0x05a0
+#define AM43XX_CM_PER_DCAN0_CLKCTRL_OFFSET		0x0428
+#define AM43XX_CM_PER_DCAN1_CLKCTRL_OFFSET		0x0430
+#define AM43XX_CM_PER_ELM_CLKCTRL_OFFSET		0x0468
+#define AM43XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET		0x0438
+#define AM43XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET		0x0440
+#define AM43XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET		0x0448
+#define AM43XX_CM_PER_GPIO1_CLKCTRL_OFFSET		0x0478
+#define AM43XX_CM_PER_GPIO2_CLKCTRL_OFFSET		0x0480
+#define AM43XX_CM_PER_GPIO3_CLKCTRL_OFFSET		0x0488
+#define AM43XX_CM_PER_I2C1_CLKCTRL_OFFSET		0x04a8
+#define AM43XX_CM_PER_I2C2_CLKCTRL_OFFSET		0x04b0
+#define AM43XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET		0x04b8
+#define AM43XX_CM_PER_MMC0_CLKCTRL_OFFSET		0x04c0
+#define AM43XX_CM_PER_MMC1_CLKCTRL_OFFSET		0x04c8
+#define AM43XX_CM_PER_SPI0_CLKCTRL_OFFSET		0x0500
+#define AM43XX_CM_PER_SPI1_CLKCTRL_OFFSET		0x0508
+#define AM43XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET		0x0528
+#define AM43XX_CM_PER_TIMER2_CLKCTRL_OFFSET		0x0530
+#define AM43XX_CM_PER_TIMER3_CLKCTRL_OFFSET		0x0538
+#define AM43XX_CM_PER_TIMER4_CLKCTRL_OFFSET		0x0540
+#define AM43XX_CM_PER_TIMER5_CLKCTRL_OFFSET		0x0548
+#define AM43XX_CM_PER_TIMER6_CLKCTRL_OFFSET		0x0550
+#define AM43XX_CM_PER_TIMER7_CLKCTRL_OFFSET		0x0558
+#define AM43XX_CM_WKUP_WKUP_M3_CLKCTRL_OFFSET		0x0228
+#define AM43XX_CM_WKUP_CONTROL_CLKCTRL_OFFSET		0x0360
+#define AM43XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET	0x0350
+#define AM43XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET	0x0358
+#define AM43XX_CM_WKUP_UART0_CLKCTRL_OFFSET		0x0348
+#define AM43XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET		0x0328
+#define AM43XX_CM_WKUP_I2C0_CLKCTRL_OFFSET		0x0340
+#define AM43XX_CM_WKUP_GPIO0_CLKCTRL_OFFSET		0x0368
+#define AM43XX_CM_WKUP_ADC_TSC_CLKCTRL_OFFSET		0x0120
+#define AM43XX_CM_WKUP_WDT1_CLKCTRL_OFFSET		0x0338
+#define AM43XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET		0x0220
+#define AM43XX_CM_RTC_RTC_CLKCTRL_OFFSET		0x0020
+#define AM43XX_CM_PER_MMC2_CLKCTRL_OFFSET		0x0248
+#define AM43XX_CM_PER_QSPI_CLKCTRL_OFFSET               0x0258
+#define AM43XX_CM_PER_GPMC_CLKCTRL_OFFSET		0x0220
+#define AM43XX_CM_PER_MCASP0_CLKCTRL_OFFSET		0x0238
+#define AM43XX_CM_PER_MCASP1_CLKCTRL_OFFSET		0x0240
+#define AM43XX_CM_PER_L4LS_CLKCTRL_OFFSET		0x0420
+#define AM43XX_CM_PER_L3_CLKCTRL_OFFSET			0x0020
+#define AM43XX_CM_PER_TPCC_CLKCTRL_OFFSET		0x0078
+#define AM43XX_CM_PER_TPTC0_CLKCTRL_OFFSET		0x0080
+#define AM43XX_CM_PER_TPTC1_CLKCTRL_OFFSET		0x0088
+#define AM43XX_CM_PER_TPTC2_CLKCTRL_OFFSET		0x0090
+#define AM43XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET		0x0b20
+#define AM43XX_CM_PER_PRUSS_CLKCTRL_OFFSET		0x0320
+#define AM43XX_CM_GFX_GFX_CLKCTRL_OFFSET		0x0020
+#define AM43XX_CM_PER_L4HS_CLKCTRL_OFFSET		0x00a0
+#define AM43XX_CM_MPU_MPU_CLKCTRL_OFFSET		0x0020
+#define AM43XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET		0x0040
+#define AM43XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET		0x0050
+#define AM43XX_CM_PER_SHA0_CLKCTRL_OFFSET		0x0058
+#define AM43XX_CM_PER_AES0_CLKCTRL_OFFSET		0x0028
+#define AM43XX_CM_PER_TIMER8_CLKCTRL_OFFSET		0x0560
+#define AM43XX_CM_PER_TIMER9_CLKCTRL_OFFSET		0x0568
+#define AM43XX_CM_PER_TIMER10_CLKCTRL_OFFSET		0x0570
+#define AM43XX_CM_PER_TIMER11_CLKCTRL_OFFSET		0x0578
+#define AM43XX_CM_WKUP_SYNCTIMER_CLKCTRL_OFFSET		0x0230
+#define AM43XX_CM_PER_EPWMSS3_CLKCTRL_OFFSET		0x0450
+#define AM43XX_CM_PER_EPWMSS4_CLKCTRL_OFFSET		0x0458
+#define AM43XX_CM_PER_EPWMSS5_CLKCTRL_OFFSET		0x0460
+#define AM43XX_CM_PER_SPI2_CLKCTRL_OFFSET		0x0510
+#define AM43XX_CM_PER_SPI3_CLKCTRL_OFFSET		0x0518
+#define AM43XX_CM_PER_SPI4_CLKCTRL_OFFSET		0x0520
+#define AM43XX_CM_PER_GPIO4_CLKCTRL_OFFSET		0x0490
+#define AM43XX_CM_PER_GPIO5_CLKCTRL_OFFSET		0x0498
+#define AM43XX_CM_PER_USB_OTG_SS0_CLKCTRL_OFFSET	0x0260
+#define AM43XX_CM_PER_USBPHYOCP2SCP0_CLKCTRL_OFFSET	0x05B8
+#define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET        0x0268
+#define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET	0x05C0
+
+#endif
diff --git a/arch/arm/mach-omap2/prcm44xx.h b/arch/arm/mach-omap2/prcm44xx.h
index f429cdd..4fea2cf 100644
--- a/arch/arm/mach-omap2/prcm44xx.h
+++ b/arch/arm/mach-omap2/prcm44xx.h
@@ -38,6 +38,11 @@
 #define OMAP54XX_SCRM_PARTITION			4
 #define OMAP54XX_PRCM_MPU_PARTITION		5
 
+#define DRA7XX_PRM_PARTITION                   1
+#define DRA7XX_CM_CORE_AON_PARTITION           2
+#define DRA7XX_CM_CORE_PARTITION               3
+#define DRA7XX_MPU_PRCM_PARTITION              5
+
 /*
  * OMAP4_MAX_PRCM_PARTITIONS: set to the highest value of the PRCM partition
  * IDs, plus one
diff --git a/arch/arm/mach-omap2/prcm_mpu7xx.h b/arch/arm/mach-omap2/prcm_mpu7xx.h
new file mode 100644
index 0000000..9ebb5ce
--- /dev/null
+++ b/arch/arm/mach-omap2/prcm_mpu7xx.h
@@ -0,0 +1,78 @@
+/*
+ * DRA7xx PRCM MPU instance offset macros
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Generated by code originally written by:
+ * Paul Walmsley (paul@pwsan.com)
+ * Rajendra Nayak (rnayak@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_PRCM_MPU7XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRCM_MPU7XX_H
+
+#include "prcm_mpu_44xx_54xx.h"
+
+#define DRA7XX_PRCM_MPU_BASE			0x48243000
+
+#define DRA7XX_PRCM_MPU_REGADDR(inst, reg)				\
+	OMAP2_L4_IO_ADDRESS(DRA7XX_PRCM_MPU_BASE + (inst) + (reg))
+
+/* MPU_PRCM instances */
+#define DRA7XX_MPU_PRCM_OCP_SOCKET_INST	0x0000
+#define DRA7XX_MPU_PRCM_DEVICE_INST	0x0200
+#define DRA7XX_MPU_PRCM_PRM_C0_INST	0x0400
+#define DRA7XX_MPU_PRCM_CM_C0_INST	0x0600
+#define DRA7XX_MPU_PRCM_PRM_C1_INST	0x0800
+#define DRA7XX_MPU_PRCM_CM_C1_INST	0x0a00
+
+/* PRCM_MPU clockdomain register offsets (from instance start) */
+#define DRA7XX_MPU_PRCM_CM_C0_CPU0_CDOFFS	0x0000
+#define DRA7XX_MPU_PRCM_CM_C1_CPU1_CDOFFS	0x0000
+
+
+/* MPU_PRCM */
+
+/* MPU_PRCM.PRCM_MPU_OCP_SOCKET register offsets */
+#define DRA7XX_REVISION_PRCM_MPU_OFFSET				0x0000
+
+/* MPU_PRCM.PRCM_MPU_DEVICE register offsets */
+#define DRA7XX_PRM_FRAC_INCREMENTER_NUMERATOR_OFFSET		0x0010
+#define DRA7XX_PRM_FRAC_INCREMENTER_DENUMERATOR_RELOAD_OFFSET	0x0014
+
+/* MPU_PRCM.PRCM_MPU_PRM_C0 register offsets */
+#define DRA7XX_PM_CPU0_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_CPU0_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_CPU0_CPU0_RSTCTRL_OFFSET			0x0010
+#define DRA7XX_RM_CPU0_CPU0_RSTST_OFFSET			0x0014
+#define DRA7XX_RM_CPU0_CPU0_CONTEXT_OFFSET			0x0024
+
+/* MPU_PRCM.PRCM_MPU_CM_C0 register offsets */
+#define DRA7XX_CM_CPU0_CLKSTCTRL_OFFSET				0x0000
+#define DRA7XX_CM_CPU0_CPU0_CLKCTRL_OFFSET			0x0020
+#define DRA7XX_CM_CPU0_CPU0_CLKCTRL				DRA7XX_MPU_PRCM_REGADDR(DRA7XX_MPU_PRCM_CM_C0_INST, 0x0020)
+
+/* MPU_PRCM.PRCM_MPU_PRM_C1 register offsets */
+#define DRA7XX_PM_CPU1_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_CPU1_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_CPU1_CPU1_RSTCTRL_OFFSET			0x0010
+#define DRA7XX_RM_CPU1_CPU1_RSTST_OFFSET			0x0014
+#define DRA7XX_RM_CPU1_CPU1_CONTEXT_OFFSET			0x0024
+
+/* MPU_PRCM.PRCM_MPU_CM_C1 register offsets */
+#define DRA7XX_CM_CPU1_CLKSTCTRL_OFFSET				0x0000
+#define DRA7XX_CM_CPU1_CPU1_CLKCTRL_OFFSET			0x0020
+#define DRA7XX_CM_CPU1_CPU1_CLKCTRL				DRA7XX_MPU_PRCM_REGADDR(DRA7XX_MPU_PRCM_CM_C1_INST, 0x0020)
+
+#endif
diff --git a/arch/arm/mach-omap2/prm-regbits-24xx.h b/arch/arm/mach-omap2/prm-regbits-24xx.h
index 91aa510..37fc905 100644
--- a/arch/arm/mach-omap2/prm-regbits-24xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-24xx.h
@@ -16,274 +16,27 @@
 
 #include "prm2xxx.h"
 
-/* Bits shared between registers */
-
-/* PRCM_IRQSTATUS_MPU, PM_IRQSTATUS_DSP, PRCM_IRQSTATUS_IVA shared bits */
-#define OMAP24XX_VOLTTRANS_ST_MASK			(1 << 2)
-#define OMAP24XX_WKUP2_ST_MASK				(1 << 1)
-#define OMAP24XX_WKUP1_ST_MASK				(1 << 0)
-
-/* PRCM_IRQENABLE_MPU, PM_IRQENABLE_DSP, PRCM_IRQENABLE_IVA shared bits */
-#define OMAP24XX_VOLTTRANS_EN_MASK			(1 << 2)
-#define OMAP24XX_WKUP2_EN_MASK				(1 << 1)
-#define OMAP24XX_WKUP1_EN_MASK				(1 << 0)
-
-/* PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_DSP, PM_WKDEP_MDM shared bits */
-#define OMAP24XX_EN_MPU_SHIFT				1
-#define OMAP24XX_EN_MPU_MASK				(1 << 1)
 #define OMAP24XX_EN_CORE_SHIFT 				0
-#define OMAP24XX_EN_CORE_MASK				(1 << 0)
-
-/*
- * PM_PWSTCTRL_MPU, PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSP, PM_PWSTCTRL_MDM
- * shared bits
- */
-#define OMAP24XX_MEMONSTATE_SHIFT			10
-#define OMAP24XX_MEMONSTATE_MASK			(0x3 << 10)
-#define OMAP24XX_MEMRETSTATE_MASK			(1 << 3)
-
-/* PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSP, PM_PWSTCTRL_MDM shared bits */
 #define OMAP24XX_FORCESTATE_MASK			(1 << 18)
-
-/*
- * PM_PWSTST_CORE, PM_PWSTST_GFX, PM_PWSTST_MPU, PM_PWSTST_DSP,
- * PM_PWSTST_MDM shared bits
- */
-#define OMAP24XX_CLKACTIVITY_MASK			(1 << 19)
-
-/* PM_PWSTST_MPU, PM_PWSTST_CORE, PM_PWSTST_DSP shared bits */
-#define OMAP24XX_LASTSTATEENTERED_SHIFT			4
-#define OMAP24XX_LASTSTATEENTERED_MASK			(0x3 << 4)
-
-/* PM_PWSTST_MPU and PM_PWSTST_DSP shared bits */
-#define OMAP2430_MEMSTATEST_SHIFT			10
-#define OMAP2430_MEMSTATEST_MASK			(0x3 << 10)
-
-/* PM_PWSTST_GFX, PM_PWSTST_DSP, PM_PWSTST_MDM shared bits */
-#define OMAP24XX_POWERSTATEST_SHIFT			0
-#define OMAP24XX_POWERSTATEST_MASK			(0x3 << 0)
-
-
-/* Bits specific to each register */
-
-/* PRCM_REVISION */
-#define OMAP24XX_REV_SHIFT				0
-#define OMAP24XX_REV_MASK				(0xff << 0)
-
-/* PRCM_SYSCONFIG */
 #define OMAP24XX_AUTOIDLE_MASK				(1 << 0)
-
-/* PRCM_IRQSTATUS_MPU specific bits */
-#define OMAP2430_DPLL_RECAL_ST_MASK			(1 << 6)
-#define OMAP24XX_TRANSITION_ST_MASK			(1 << 5)
-#define OMAP24XX_EVGENOFF_ST_MASK			(1 << 4)
-#define OMAP24XX_EVGENON_ST_MASK			(1 << 3)
-
-/* PRCM_IRQENABLE_MPU specific bits */
-#define OMAP2430_DPLL_RECAL_EN_MASK			(1 << 6)
-#define OMAP24XX_TRANSITION_EN_MASK			(1 << 5)
-#define OMAP24XX_EVGENOFF_EN_MASK			(1 << 4)
-#define OMAP24XX_EVGENON_EN_MASK			(1 << 3)
-
-/* PRCM_VOLTCTRL */
 #define OMAP24XX_AUTO_EXTVOLT_MASK			(1 << 15)
-#define OMAP24XX_FORCE_EXTVOLT_MASK			(1 << 14)
 #define OMAP24XX_SETOFF_LEVEL_SHIFT			12
-#define OMAP24XX_SETOFF_LEVEL_MASK			(0x3 << 12)
 #define OMAP24XX_MEMRETCTRL_MASK			(1 << 8)
 #define OMAP24XX_SETRET_LEVEL_SHIFT			6
-#define OMAP24XX_SETRET_LEVEL_MASK			(0x3 << 6)
 #define OMAP24XX_VOLT_LEVEL_SHIFT			0
-#define OMAP24XX_VOLT_LEVEL_MASK			(0x3 << 0)
-
-/* PRCM_VOLTST */
-#define OMAP24XX_ST_VOLTLEVEL_SHIFT			0
-#define OMAP24XX_ST_VOLTLEVEL_MASK			(0x3 << 0)
-
-/* PRCM_CLKSRC_CTRL specific bits */
-
-/* PRCM_CLKOUT_CTRL */
 #define OMAP2420_CLKOUT2_EN_SHIFT			15
-#define OMAP2420_CLKOUT2_EN_MASK			(1 << 15)
 #define OMAP2420_CLKOUT2_DIV_SHIFT			11
-#define OMAP2420_CLKOUT2_DIV_MASK			(0x7 << 11)
 #define OMAP2420_CLKOUT2_DIV_WIDTH			3
-#define OMAP2420_CLKOUT2_SOURCE_SHIFT			8
 #define OMAP2420_CLKOUT2_SOURCE_MASK			(0x3 << 8)
 #define OMAP24XX_CLKOUT_EN_SHIFT			7
-#define OMAP24XX_CLKOUT_EN_MASK				(1 << 7)
 #define OMAP24XX_CLKOUT_DIV_SHIFT			3
-#define OMAP24XX_CLKOUT_DIV_MASK			(0x7 << 3)
 #define OMAP24XX_CLKOUT_DIV_WIDTH			3
-#define OMAP24XX_CLKOUT_SOURCE_SHIFT			0
 #define OMAP24XX_CLKOUT_SOURCE_MASK			(0x3 << 0)
-
-/* PRCM_CLKEMUL_CTRL */
 #define OMAP24XX_EMULATION_EN_SHIFT			0
-#define OMAP24XX_EMULATION_EN_MASK			(1 << 0)
-
-/* PRCM_CLKCFG_CTRL */
-#define OMAP24XX_VALID_CONFIG_MASK			(1 << 0)
-
-/* PRCM_CLKCFG_STATUS */
-#define OMAP24XX_CONFIG_STATUS_MASK			(1 << 0)
-
-/* PRCM_VOLTSETUP specific bits */
-
-/* PRCM_CLKSSETUP specific bits */
-
-/* PRCM_POLCTRL */
-#define OMAP2420_CLKOUT2_POL_MASK			(1 << 10)
-#define OMAP24XX_CLKOUT_POL_MASK			(1 << 9)
-#define OMAP24XX_CLKREQ_POL_MASK			(1 << 8)
-#define OMAP2430_USE_POWEROK_MASK			(1 << 2)
-#define OMAP2430_POWEROK_POL_MASK			(1 << 1)
-#define OMAP24XX_EXTVOL_POL_MASK			(1 << 0)
-
-/* RM_RSTST_MPU specific bits */
-/* 2430 calls GLOBALWMPU_RST "GLOBALWARM_RST" instead */
-
-/* PM_WKDEP_MPU specific bits */
 #define OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT		5
-#define OMAP2430_PM_WKDEP_MPU_EN_MDM_MASK		(1 << 5)
 #define OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT		2
-#define OMAP24XX_PM_WKDEP_MPU_EN_DSP_MASK		(1 << 2)
-
-/* PM_EVGENCTRL_MPU specific bits */
-
-/* PM_EVEGENONTIM_MPU specific bits */
-
-/* PM_EVEGENOFFTIM_MPU specific bits */
-
-/* PM_PWSTCTRL_MPU specific bits */
-#define OMAP2430_FORCESTATE_MASK			(1 << 18)
-
-/* PM_PWSTST_MPU specific bits */
-/* INTRANSITION, CLKACTIVITY, POWERSTATE, MEMSTATEST are 2430 only */
-
-/* PM_WKEN1_CORE specific bits */
-
-/* PM_WKEN2_CORE specific bits */
-
-/* PM_WKST1_CORE specific bits*/
-
-/* PM_WKST2_CORE specific bits */
-
-/* PM_WKDEP_CORE specific bits*/
-#define OMAP2430_PM_WKDEP_CORE_EN_MDM_MASK		(1 << 5)
-#define OMAP24XX_PM_WKDEP_CORE_EN_GFX_MASK		(1 << 3)
-#define OMAP24XX_PM_WKDEP_CORE_EN_DSP_MASK		(1 << 2)
-
-/* PM_PWSTCTRL_CORE specific bits */
-#define OMAP24XX_MEMORYCHANGE_MASK			(1 << 20)
-#define OMAP24XX_MEM3ONSTATE_SHIFT			14
-#define OMAP24XX_MEM3ONSTATE_MASK			(0x3 << 14)
-#define OMAP24XX_MEM2ONSTATE_SHIFT			12
-#define OMAP24XX_MEM2ONSTATE_MASK			(0x3 << 12)
-#define OMAP24XX_MEM1ONSTATE_SHIFT			10
-#define OMAP24XX_MEM1ONSTATE_MASK			(0x3 << 10)
-#define OMAP24XX_MEM3RETSTATE_MASK			(1 << 5)
-#define OMAP24XX_MEM2RETSTATE_MASK			(1 << 4)
-#define OMAP24XX_MEM1RETSTATE_MASK			(1 << 3)
-
-/* PM_PWSTST_CORE specific bits */
-#define OMAP24XX_MEM3STATEST_SHIFT			14
-#define OMAP24XX_MEM3STATEST_MASK			(0x3 << 14)
-#define OMAP24XX_MEM2STATEST_SHIFT			12
-#define OMAP24XX_MEM2STATEST_MASK			(0x3 << 12)
-#define OMAP24XX_MEM1STATEST_SHIFT			10
-#define OMAP24XX_MEM1STATEST_MASK			(0x3 << 10)
-
-/* RM_RSTCTRL_GFX */
-#define OMAP24XX_GFX_RST_MASK				(1 << 0)
-
-/* RM_RSTST_GFX specific bits */
-#define OMAP24XX_GFX_SW_RST_MASK			(1 << 4)
-
-/* PM_PWSTCTRL_GFX specific bits */
-
-/* PM_WKDEP_GFX specific bits */
-/* 2430 often calls EN_WAKEUP "EN_WKUP" */
-
-/* RM_RSTCTRL_WKUP specific bits */
-
-/* RM_RSTTIME_WKUP specific bits */
-
-/* RM_RSTST_WKUP specific bits */
-/* 2430 calls EXTWMPU_RST "EXTWARM_RST" and GLOBALWMPU_RST "GLOBALWARM_RST" */
 #define OMAP24XX_EXTWMPU_RST_SHIFT			6
-#define OMAP24XX_EXTWMPU_RST_MASK			(1 << 6)
 #define OMAP24XX_SECU_WD_RST_SHIFT			5
-#define OMAP24XX_SECU_WD_RST_MASK			(1 << 5)
 #define OMAP24XX_MPU_WD_RST_SHIFT			4
-#define OMAP24XX_MPU_WD_RST_MASK			(1 << 4)
 #define OMAP24XX_SECU_VIOL_RST_SHIFT			3
-#define OMAP24XX_SECU_VIOL_RST_MASK			(1 << 3)
-
-/* PM_WKEN_WKUP specific bits */
-
-/* PM_WKST_WKUP specific bits */
-
-/* RM_RSTCTRL_DSP */
-#define OMAP2420_RST_IVA_MASK				(1 << 8)
-#define OMAP24XX_RST2_DSP_MASK				(1 << 1)
-#define OMAP24XX_RST1_DSP_MASK				(1 << 0)
-
-/* RM_RSTST_DSP specific bits */
-/* 2430 calls GLOBALWMPU_RST "GLOBALWARM_RST" */
-#define OMAP2420_IVA_SW_RST_MASK			(1 << 8)
-#define OMAP24XX_DSP_SW_RST2_MASK			(1 << 5)
-#define OMAP24XX_DSP_SW_RST1_MASK			(1 << 4)
-
-/* PM_WKDEP_DSP specific bits */
-
-/* PM_PWSTCTRL_DSP specific bits */
-/* 2430 only: MEMONSTATE, MEMRETSTATE */
-#define OMAP2420_MEMIONSTATE_SHIFT			12
-#define OMAP2420_MEMIONSTATE_MASK			(0x3 << 12)
-#define OMAP2420_MEMIRETSTATE_MASK			(1 << 4)
-
-/* PM_PWSTST_DSP specific bits */
-/* MEMSTATEST is 2430 only */
-#define OMAP2420_MEMISTATEST_SHIFT			12
-#define OMAP2420_MEMISTATEST_MASK			(0x3 << 12)
-
-/* PRCM_IRQSTATUS_DSP specific bits */
-
-/* PRCM_IRQENABLE_DSP specific bits */
-
-/* RM_RSTCTRL_MDM */
-/* 2430 only */
-#define OMAP2430_PWRON1_MDM_MASK			(1 << 1)
-#define OMAP2430_RST1_MDM_MASK				(1 << 0)
-
-/* RM_RSTST_MDM specific bits */
-/* 2430 only */
-#define OMAP2430_MDM_SECU_VIOL_MASK			(1 << 6)
-#define OMAP2430_MDM_SW_PWRON1_MASK			(1 << 5)
-#define OMAP2430_MDM_SW_RST1_MASK			(1 << 4)
-
-/* PM_WKEN_MDM */
-/* 2430 only */
-#define OMAP2430_PM_WKEN_MDM_EN_MDM_MASK		(1 << 0)
-
-/* PM_WKST_MDM specific bits */
-/* 2430 only */
-
-/* PM_WKDEP_MDM specific bits */
-/* 2430 only */
-
-/* PM_PWSTCTRL_MDM specific bits */
-/* 2430 only */
-#define OMAP2430_KILLDOMAINWKUP_MASK			(1 << 19)
-
-/* PM_PWSTST_MDM specific bits */
-/* 2430 only */
-
-/* PRCM_IRQSTATUS_IVA */
-/* 2420 only */
-
-/* PRCM_IRQENABLE_IVA */
-/* 2420 only */
-
 #endif
diff --git a/arch/arm/mach-omap2/prm-regbits-33xx.h b/arch/arm/mach-omap2/prm-regbits-33xx.h
index 0221b5c..84feece 100644
--- a/arch/arm/mach-omap2/prm-regbits-33xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-33xx.h
@@ -18,340 +18,35 @@
 
 #include "prm.h"
 
-/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
-#define AM33XX_ABBOFF_ACT_EXPORT_SHIFT			1
-#define AM33XX_ABBOFF_ACT_EXPORT_MASK			(1 << 1)
-
-/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
-#define AM33XX_ABBOFF_SLEEP_EXPORT_SHIFT		2
-#define AM33XX_ABBOFF_SLEEP_EXPORT_MASK			(1 << 2)
-
-/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
-#define AM33XX_AIPOFF_SHIFT				8
-#define AM33XX_AIPOFF_MASK				(1 << 8)
-
-/* Used by PM_WKUP_PWRSTST */
-#define AM33XX_DEBUGSS_MEM_STATEST_SHIFT		17
-#define AM33XX_DEBUGSS_MEM_STATEST_MASK			(0x3 << 17)
-
-/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
-#define AM33XX_DISABLE_RTA_EXPORT_SHIFT			0
-#define AM33XX_DISABLE_RTA_EXPORT_MASK			(1 << 0)
-
-/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
-#define AM33XX_DPLL_CORE_RECAL_EN_SHIFT			12
-#define AM33XX_DPLL_CORE_RECAL_EN_MASK			(1 << 12)
-
-/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
-#define AM33XX_DPLL_CORE_RECAL_ST_SHIFT			12
-#define AM33XX_DPLL_CORE_RECAL_ST_MASK			(1 << 12)
-
-/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
-#define AM33XX_DPLL_DDR_RECAL_EN_SHIFT			14
-#define AM33XX_DPLL_DDR_RECAL_EN_MASK			(1 << 14)
-
-/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
-#define AM33XX_DPLL_DDR_RECAL_ST_SHIFT			14
-#define AM33XX_DPLL_DDR_RECAL_ST_MASK			(1 << 14)
-
-/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
-#define AM33XX_DPLL_DISP_RECAL_EN_SHIFT			15
-#define AM33XX_DPLL_DISP_RECAL_EN_MASK			(1 << 15)
-
-/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
-#define AM33XX_DPLL_DISP_RECAL_ST_SHIFT			13
-#define AM33XX_DPLL_DISP_RECAL_ST_MASK			(1 << 13)
-
-/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
-#define AM33XX_DPLL_MPU_RECAL_EN_SHIFT			11
-#define AM33XX_DPLL_MPU_RECAL_EN_MASK			(1 << 11)
-
-/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
-#define AM33XX_DPLL_MPU_RECAL_ST_SHIFT			11
-#define AM33XX_DPLL_MPU_RECAL_ST_MASK			(1 << 11)
-
-/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
-#define AM33XX_DPLL_PER_RECAL_EN_SHIFT			13
-#define AM33XX_DPLL_PER_RECAL_EN_MASK			(1 << 13)
-
-/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
-#define AM33XX_DPLL_PER_RECAL_ST_SHIFT			15
-#define AM33XX_DPLL_PER_RECAL_ST_MASK			(1 << 15)
-
-/* Used by RM_WKUP_RSTST */
-#define AM33XX_EMULATION_M3_RST_SHIFT			6
-#define AM33XX_EMULATION_M3_RST_MASK			(1 << 6)
-
-/* Used by RM_MPU_RSTST */
-#define AM33XX_EMULATION_MPU_RST_SHIFT			5
-#define AM33XX_EMULATION_MPU_RST_MASK			(1 << 5)
-
-/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
-#define AM33XX_ENFUNC1_EXPORT_SHIFT			3
-#define AM33XX_ENFUNC1_EXPORT_MASK			(1 << 3)
-
-/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
-#define AM33XX_ENFUNC3_EXPORT_SHIFT			5
-#define AM33XX_ENFUNC3_EXPORT_MASK			(1 << 5)
-
-/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
-#define AM33XX_ENFUNC4_SHIFT				6
-#define AM33XX_ENFUNC4_MASK				(1 << 6)
-
-/* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_MPU_SETUP */
-#define AM33XX_ENFUNC5_SHIFT				7
-#define AM33XX_ENFUNC5_MASK				(1 << 7)
-
-/* Used by PRM_RSTST */
-#define AM33XX_EXTERNAL_WARM_RST_SHIFT			5
-#define AM33XX_EXTERNAL_WARM_RST_MASK			(1 << 5)
-
-/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
-#define AM33XX_FORCEWKUP_EN_SHIFT			10
-#define AM33XX_FORCEWKUP_EN_MASK			(1 << 10)
-
-/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
-#define AM33XX_FORCEWKUP_ST_SHIFT			10
-#define AM33XX_FORCEWKUP_ST_MASK			(1 << 10)
-
-/* Used by PM_GFX_PWRSTCTRL */
-#define AM33XX_GFX_MEM_ONSTATE_SHIFT			17
 #define AM33XX_GFX_MEM_ONSTATE_MASK			(0x3 << 17)
-
-/* Used by PM_GFX_PWRSTCTRL */
-#define AM33XX_GFX_MEM_RETSTATE_SHIFT			6
 #define AM33XX_GFX_MEM_RETSTATE_MASK			(1 << 6)
-
-/* Used by PM_GFX_PWRSTST */
-#define AM33XX_GFX_MEM_STATEST_SHIFT			4
 #define AM33XX_GFX_MEM_STATEST_MASK			(0x3 << 4)
-
-/* Used by RM_GFX_RSTCTRL, RM_GFX_RSTST */
-#define AM33XX_GFX_RST_SHIFT				0
-#define AM33XX_GFX_RST_MASK				(1 << 0)
-
-/* Used by PRM_RSTST */
-#define AM33XX_GLOBAL_COLD_RST_SHIFT			0
-#define AM33XX_GLOBAL_COLD_RST_MASK			(1 << 0)
-
-/* Used by PRM_RSTST */
-#define AM33XX_GLOBAL_WARM_SW_RST_SHIFT			1
 #define AM33XX_GLOBAL_WARM_SW_RST_MASK			(1 << 1)
-
-/* Used by RM_WKUP_RSTST */
-#define AM33XX_ICECRUSHER_M3_RST_SHIFT			7
-#define AM33XX_ICECRUSHER_M3_RST_MASK			(1 << 7)
-
-/* Used by RM_MPU_RSTST */
-#define AM33XX_ICECRUSHER_MPU_RST_SHIFT			6
-#define AM33XX_ICECRUSHER_MPU_RST_MASK			(1 << 6)
-
-/* Used by PRM_RSTST */
-#define AM33XX_ICEPICK_RST_SHIFT			9
-#define AM33XX_ICEPICK_RST_MASK				(1 << 9)
-
-/* Used by RM_PER_RSTCTRL */
-#define AM33XX_PRUSS_LRST_SHIFT				1
-#define AM33XX_PRUSS_LRST_MASK				(1 << 1)
-
-/* Used by PM_PER_PWRSTCTRL */
-#define AM33XX_PRUSS_MEM_ONSTATE_SHIFT			5
+#define AM33XX_RST_GLOBAL_WARM_SW_MASK			(1 << 0)
 #define AM33XX_PRUSS_MEM_ONSTATE_MASK			(0x3 << 5)
-
-/* Used by PM_PER_PWRSTCTRL */
-#define AM33XX_PRUSS_MEM_RETSTATE_SHIFT			7
 #define AM33XX_PRUSS_MEM_RETSTATE_MASK			(1 << 7)
-
-/* Used by PM_PER_PWRSTST */
-#define AM33XX_PRUSS_MEM_STATEST_SHIFT			23
 #define AM33XX_PRUSS_MEM_STATEST_MASK			(0x3 << 23)
-
-/*
- * Used by PM_GFX_PWRSTST, PM_CEFUSE_PWRSTST, PM_PER_PWRSTST, PM_MPU_PWRSTST,
- * PM_WKUP_PWRSTST, PM_RTC_PWRSTST
- */
-#define AM33XX_INTRANSITION_SHIFT			20
-#define AM33XX_INTRANSITION_MASK			(1 << 20)
-
-/* Used by PM_CEFUSE_PWRSTST */
 #define AM33XX_LASTPOWERSTATEENTERED_SHIFT		24
 #define AM33XX_LASTPOWERSTATEENTERED_MASK		(0x3 << 24)
-
-/* Used by PM_GFX_PWRSTCTRL, PM_MPU_PWRSTCTRL, PM_RTC_PWRSTCTRL */
-#define AM33XX_LOGICRETSTATE_SHIFT			2
 #define AM33XX_LOGICRETSTATE_MASK			(1 << 2)
-
-/* Renamed from LOGICRETSTATE Used by PM_PER_PWRSTCTRL, PM_WKUP_PWRSTCTRL */
-#define AM33XX_LOGICRETSTATE_3_3_SHIFT			3
 #define AM33XX_LOGICRETSTATE_3_3_MASK			(1 << 3)
-
-/*
- * Used by PM_GFX_PWRSTST, PM_CEFUSE_PWRSTST, PM_PER_PWRSTST, PM_MPU_PWRSTST,
- * PM_WKUP_PWRSTST, PM_RTC_PWRSTST
- */
 #define AM33XX_LOGICSTATEST_SHIFT			2
 #define AM33XX_LOGICSTATEST_MASK			(1 << 2)
-
-/*
- * Used by PM_GFX_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL, PM_PER_PWRSTCTRL,
- * PM_MPU_PWRSTCTRL, PM_WKUP_PWRSTCTRL, PM_RTC_PWRSTCTRL
- */
 #define AM33XX_LOWPOWERSTATECHANGE_SHIFT		4
 #define AM33XX_LOWPOWERSTATECHANGE_MASK			(1 << 4)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define AM33XX_MPU_L1_ONSTATE_SHIFT			18
 #define AM33XX_MPU_L1_ONSTATE_MASK			(0x3 << 18)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define AM33XX_MPU_L1_RETSTATE_SHIFT			22
 #define AM33XX_MPU_L1_RETSTATE_MASK			(1 << 22)
-
-/* Used by PM_MPU_PWRSTST */
-#define AM33XX_MPU_L1_STATEST_SHIFT			6
 #define AM33XX_MPU_L1_STATEST_MASK			(0x3 << 6)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define AM33XX_MPU_L2_ONSTATE_SHIFT			20
 #define AM33XX_MPU_L2_ONSTATE_MASK			(0x3 << 20)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define AM33XX_MPU_L2_RETSTATE_SHIFT			23
 #define AM33XX_MPU_L2_RETSTATE_MASK			(1 << 23)
-
-/* Used by PM_MPU_PWRSTST */
-#define AM33XX_MPU_L2_STATEST_SHIFT			8
 #define AM33XX_MPU_L2_STATEST_MASK			(0x3 << 8)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define AM33XX_MPU_RAM_ONSTATE_SHIFT			16
 #define AM33XX_MPU_RAM_ONSTATE_MASK			(0x3 << 16)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define AM33XX_MPU_RAM_RETSTATE_SHIFT			24
 #define AM33XX_MPU_RAM_RETSTATE_MASK			(1 << 24)
-
-/* Used by PM_MPU_PWRSTST */
-#define AM33XX_MPU_RAM_STATEST_SHIFT			4
 #define AM33XX_MPU_RAM_STATEST_MASK			(0x3 << 4)
-
-/* Used by PRM_RSTST */
-#define AM33XX_MPU_SECURITY_VIOL_RST_SHIFT		2
-#define AM33XX_MPU_SECURITY_VIOL_RST_MASK		(1 << 2)
-
-/* Used by PRM_SRAM_COUNT */
-#define AM33XX_PCHARGECNT_VALUE_SHIFT			0
-#define AM33XX_PCHARGECNT_VALUE_MASK			(0x3f << 0)
-
-/* Used by RM_PER_RSTCTRL */
-#define AM33XX_PCI_LRST_SHIFT				0
-#define AM33XX_PCI_LRST_MASK				(1 << 0)
-
-/* Renamed from PCI_LRST Used by RM_PER_RSTST */
-#define AM33XX_PCI_LRST_5_5_SHIFT			5
-#define AM33XX_PCI_LRST_5_5_MASK			(1 << 5)
-
-/* Used by PM_PER_PWRSTCTRL */
-#define AM33XX_PER_MEM_ONSTATE_SHIFT			25
 #define AM33XX_PER_MEM_ONSTATE_MASK			(0x3 << 25)
-
-/* Used by PM_PER_PWRSTCTRL */
-#define AM33XX_PER_MEM_RETSTATE_SHIFT			29
 #define AM33XX_PER_MEM_RETSTATE_MASK			(1 << 29)
-
-/* Used by PM_PER_PWRSTST */
-#define AM33XX_PER_MEM_STATEST_SHIFT			17
 #define AM33XX_PER_MEM_STATEST_MASK			(0x3 << 17)
-
-/*
- * Used by PM_GFX_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL, PM_PER_PWRSTCTRL,
- * PM_MPU_PWRSTCTRL
- */
-#define AM33XX_POWERSTATE_SHIFT				0
-#define AM33XX_POWERSTATE_MASK				(0x3 << 0)
-
-/* Used by PM_GFX_PWRSTST, PM_CEFUSE_PWRSTST, PM_PER_PWRSTST, PM_MPU_PWRSTST */
-#define AM33XX_POWERSTATEST_SHIFT			0
-#define AM33XX_POWERSTATEST_MASK			(0x3 << 0)
-
-/* Used by PM_PER_PWRSTCTRL */
-#define AM33XX_RAM_MEM_ONSTATE_SHIFT			30
 #define AM33XX_RAM_MEM_ONSTATE_MASK			(0x3 << 30)
-
-/* Used by PM_PER_PWRSTCTRL */
-#define AM33XX_RAM_MEM_RETSTATE_SHIFT			27
 #define AM33XX_RAM_MEM_RETSTATE_MASK			(1 << 27)
-
-/* Used by PM_PER_PWRSTST */
-#define AM33XX_RAM_MEM_STATEST_SHIFT			21
 #define AM33XX_RAM_MEM_STATEST_MASK			(0x3 << 21)
-
-/* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_MPU_CTRL */
-#define AM33XX_RETMODE_ENABLE_SHIFT			0
-#define AM33XX_RETMODE_ENABLE_MASK			(1 << 0)
-
-/* Used by REVISION_PRM */
-#define AM33XX_REV_SHIFT				0
-#define AM33XX_REV_MASK					(0xff << 0)
-
-/* Used by PRM_RSTTIME */
-#define AM33XX_RSTTIME1_SHIFT				0
-#define AM33XX_RSTTIME1_MASK				(0xff << 0)
-
-/* Used by PRM_RSTTIME */
-#define AM33XX_RSTTIME2_SHIFT				8
-#define AM33XX_RSTTIME2_MASK				(0x1f << 8)
-
-/* Used by PRM_RSTCTRL */
-#define AM33XX_RST_GLOBAL_COLD_SW_SHIFT			1
-#define AM33XX_RST_GLOBAL_COLD_SW_MASK			(1 << 1)
-
-/* Used by PRM_RSTCTRL */
-#define AM33XX_RST_GLOBAL_WARM_SW_SHIFT			0
-#define AM33XX_RST_GLOBAL_WARM_SW_MASK			(1 << 0)
-
-/* Used by PRM_SRAM_COUNT */
-#define AM33XX_SLPCNT_VALUE_SHIFT			16
-#define AM33XX_SLPCNT_VALUE_MASK			(0xff << 16)
-
-/* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_MPU_CTRL */
-#define AM33XX_SRAMLDO_STATUS_SHIFT			8
-#define AM33XX_SRAMLDO_STATUS_MASK			(1 << 8)
-
-/* Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_MPU_CTRL */
-#define AM33XX_SRAM_IN_TRANSITION_SHIFT			9
-#define AM33XX_SRAM_IN_TRANSITION_MASK			(1 << 9)
-
-/* Used by PRM_SRAM_COUNT */
-#define AM33XX_STARTUP_COUNT_SHIFT			24
-#define AM33XX_STARTUP_COUNT_MASK			(0xff << 24)
-
-/* Used by PRM_IRQENABLE_M3, PRM_IRQENABLE_MPU */
-#define AM33XX_TRANSITION_EN_SHIFT			8
-#define AM33XX_TRANSITION_EN_MASK			(1 << 8)
-
-/* Used by PRM_IRQSTATUS_M3, PRM_IRQSTATUS_MPU */
-#define AM33XX_TRANSITION_ST_SHIFT			8
-#define AM33XX_TRANSITION_ST_MASK			(1 << 8)
-
-/* Used by PRM_SRAM_COUNT */
-#define AM33XX_VSETUPCNT_VALUE_SHIFT			8
-#define AM33XX_VSETUPCNT_VALUE_MASK			(0xff << 8)
-
-/* Used by PRM_RSTST */
-#define AM33XX_WDT0_RST_SHIFT				3
-#define AM33XX_WDT0_RST_MASK				(1 << 3)
-
-/* Used by PRM_RSTST */
-#define AM33XX_WDT1_RST_SHIFT				4
-#define AM33XX_WDT1_RST_MASK				(1 << 4)
-
-/* Used by RM_WKUP_RSTCTRL */
-#define AM33XX_WKUP_M3_LRST_SHIFT			3
-#define AM33XX_WKUP_M3_LRST_MASK			(1 << 3)
-
-/* Renamed from WKUP_M3_LRST Used by RM_WKUP_RSTST */
-#define AM33XX_WKUP_M3_LRST_5_5_SHIFT			5
-#define AM33XX_WKUP_M3_LRST_5_5_MASK			(1 << 5)
-
 #endif
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index b0a2142..cebad56 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -16,115 +16,25 @@
 
 #include "prm3xxx.h"
 
-/* Shared register bits */
-
-/* PRM_VC_CMD_VAL_0, PRM_VC_CMD_VAL_1 shared bits */
-#define OMAP3430_ON_SHIFT				24
-#define OMAP3430_ON_MASK				(0xff << 24)
-#define OMAP3430_ONLP_SHIFT				16
-#define OMAP3430_ONLP_MASK				(0xff << 16)
-#define OMAP3430_RET_SHIFT				8
-#define OMAP3430_RET_MASK				(0xff << 8)
-#define OMAP3430_OFF_SHIFT				0
-#define OMAP3430_OFF_MASK				(0xff << 0)
-
-/* PRM_VP1_CONFIG, PRM_VP2_CONFIG shared bits */
-#define OMAP3430_ERROROFFSET_SHIFT			24
 #define OMAP3430_ERROROFFSET_MASK			(0xff << 24)
-#define OMAP3430_ERRORGAIN_SHIFT			16
 #define OMAP3430_ERRORGAIN_MASK				(0xff << 16)
-#define OMAP3430_INITVOLTAGE_SHIFT			8
 #define OMAP3430_INITVOLTAGE_MASK			(0xff << 8)
 #define OMAP3430_TIMEOUTEN_MASK				(1 << 3)
 #define OMAP3430_INITVDD_MASK				(1 << 2)
 #define OMAP3430_FORCEUPDATE_MASK			(1 << 1)
 #define OMAP3430_VPENABLE_MASK				(1 << 0)
-
-/* PRM_VP1_VSTEPMIN, PRM_VP2_VSTEPMIN shared bits */
 #define OMAP3430_SMPSWAITTIMEMIN_SHIFT			8
-#define OMAP3430_SMPSWAITTIMEMIN_MASK			(0xffff << 8)
 #define OMAP3430_VSTEPMIN_SHIFT				0
-#define OMAP3430_VSTEPMIN_MASK				(0xff << 0)
-
-/* PRM_VP1_VSTEPMAX, PRM_VP2_VSTEPMAX shared bits */
 #define OMAP3430_SMPSWAITTIMEMAX_SHIFT			8
-#define OMAP3430_SMPSWAITTIMEMAX_MASK			(0xffff << 8)
 #define OMAP3430_VSTEPMAX_SHIFT				0
-#define OMAP3430_VSTEPMAX_MASK				(0xff << 0)
-
-/* PRM_VP1_VLIMITTO, PRM_VP2_VLIMITTO shared bits */
 #define OMAP3430_VDDMAX_SHIFT				24
-#define OMAP3430_VDDMAX_MASK				(0xff << 24)
 #define OMAP3430_VDDMIN_SHIFT				16
-#define OMAP3430_VDDMIN_MASK				(0xff << 16)
 #define OMAP3430_TIMEOUT_SHIFT				0
-#define OMAP3430_TIMEOUT_MASK				(0xffff << 0)
-
-/* PRM_VP1_VOLTAGE, PRM_VP2_VOLTAGE shared bits */
-#define OMAP3430_VPVOLTAGE_SHIFT			0
 #define OMAP3430_VPVOLTAGE_MASK				(0xff << 0)
-
-/* PRM_VP1_STATUS, PRM_VP2_STATUS shared bits */
-#define OMAP3430_VPINIDLE_MASK				(1 << 0)
-
-/* PM_WKDEP_IVA2, PM_WKDEP_MPU shared bits */
 #define OMAP3430_EN_PER_SHIFT				7
-#define OMAP3430_EN_PER_MASK				(1 << 7)
-
-/* PM_PWSTCTRL_IVA2, PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE shared bits */
-#define OMAP3430_MEMORYCHANGE_MASK			(1 << 3)
-
-/* PM_PWSTST_IVA2, PM_PWSTST_CORE shared bits */
 #define OMAP3430_LOGICSTATEST_MASK			(1 << 2)
-
-/* PM_PREPWSTST_IVA2, PM_PREPWSTST_CORE shared bits */
 #define OMAP3430_LASTLOGICSTATEENTERED_MASK		(1 << 2)
-
-/*
- * PM_PREPWSTST_IVA2, PM_PREPWSTST_MPU, PM_PREPWSTST_CORE,
- * PM_PREPWSTST_GFX, PM_PREPWSTST_DSS, PM_PREPWSTST_CAM,
- * PM_PREPWSTST_PER, PM_PREPWSTST_NEON shared bits
- */
-#define OMAP3430_LASTPOWERSTATEENTERED_SHIFT		0
 #define OMAP3430_LASTPOWERSTATEENTERED_MASK		(0x3 << 0)
-
-/* PRM_IRQSTATUS_IVA2, PRM_IRQSTATUS_MPU shared bits */
-#define OMAP3430_WKUP_ST_MASK				(1 << 0)
-
-/* PRM_IRQENABLE_IVA2, PRM_IRQENABLE_MPU shared bits */
-#define OMAP3430_WKUP_EN_MASK				(1 << 0)
-
-/* PM_MPUGRPSEL1_CORE, PM_IVA2GRPSEL1_CORE shared bits */
-#define OMAP3430_GRPSEL_MMC2_MASK			(1 << 25)
-#define OMAP3430_GRPSEL_MMC1_MASK			(1 << 24)
-#define OMAP3430_GRPSEL_MCSPI4_MASK			(1 << 21)
-#define OMAP3430_GRPSEL_MCSPI3_MASK			(1 << 20)
-#define OMAP3430_GRPSEL_MCSPI2_MASK			(1 << 19)
-#define OMAP3430_GRPSEL_MCSPI1_MASK			(1 << 18)
-#define OMAP3430_GRPSEL_I2C3_SHIFT			17
-#define OMAP3430_GRPSEL_I2C3_MASK			(1 << 17)
-#define OMAP3430_GRPSEL_I2C2_SHIFT			16
-#define OMAP3430_GRPSEL_I2C2_MASK			(1 << 16)
-#define OMAP3430_GRPSEL_I2C1_SHIFT			15
-#define OMAP3430_GRPSEL_I2C1_MASK			(1 << 15)
-#define OMAP3430_GRPSEL_UART2_MASK			(1 << 14)
-#define OMAP3430_GRPSEL_UART1_MASK			(1 << 13)
-#define OMAP3430_GRPSEL_GPT11_MASK			(1 << 12)
-#define OMAP3430_GRPSEL_GPT10_MASK			(1 << 11)
-#define OMAP3430_GRPSEL_MCBSP5_MASK			(1 << 10)
-#define OMAP3430_GRPSEL_MCBSP1_MASK			(1 << 9)
-#define OMAP3430_GRPSEL_HSOTGUSB_MASK			(1 << 4)
-#define OMAP3430_GRPSEL_D2D_MASK			(1 << 3)
-
-/*
- * PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM,
- * PM_PWSTCTRL_PER shared bits
- */
-#define OMAP3430_MEMONSTATE_SHIFT			16
-#define OMAP3430_MEMONSTATE_MASK			(0x3 << 16)
-#define OMAP3430_MEMRETSTATE_MASK			(1 << 8)
-
-/* PM_MPUGRPSEL_PER, PM_IVA2GRPSEL_PER shared bits */
 #define OMAP3630_GRPSEL_UART4_MASK			(1 << 18)
 #define OMAP3430_GRPSEL_GPIO6_MASK			(1 << 17)
 #define OMAP3430_GRPSEL_GPIO5_MASK			(1 << 16)
@@ -132,480 +42,89 @@
 #define OMAP3430_GRPSEL_GPIO3_MASK			(1 << 14)
 #define OMAP3430_GRPSEL_GPIO2_MASK			(1 << 13)
 #define OMAP3430_GRPSEL_UART3_MASK			(1 << 11)
-#define OMAP3430_GRPSEL_GPT9_MASK			(1 << 10)
-#define OMAP3430_GRPSEL_GPT8_MASK			(1 << 9)
-#define OMAP3430_GRPSEL_GPT7_MASK			(1 << 8)
-#define OMAP3430_GRPSEL_GPT6_MASK			(1 << 7)
-#define OMAP3430_GRPSEL_GPT5_MASK			(1 << 6)
-#define OMAP3430_GRPSEL_GPT4_MASK			(1 << 5)
-#define OMAP3430_GRPSEL_GPT3_MASK			(1 << 4)
-#define OMAP3430_GRPSEL_GPT2_MASK			(1 << 3)
 #define OMAP3430_GRPSEL_MCBSP4_MASK			(1 << 2)
 #define OMAP3430_GRPSEL_MCBSP3_MASK			(1 << 1)
 #define OMAP3430_GRPSEL_MCBSP2_MASK			(1 << 0)
-
-/* PM_MPUGRPSEL_WKUP, PM_IVA2GRPSEL_WKUP shared bits */
-#define OMAP3430_GRPSEL_IO_MASK				(1 << 8)
-#define OMAP3430_GRPSEL_SR2_MASK			(1 << 7)
-#define OMAP3430_GRPSEL_SR1_MASK			(1 << 6)
 #define OMAP3430_GRPSEL_GPIO1_MASK			(1 << 3)
 #define OMAP3430_GRPSEL_GPT12_MASK			(1 << 1)
 #define OMAP3430_GRPSEL_GPT1_MASK			(1 << 0)
-
-/* Bits specific to each register */
-
-/* RM_RSTCTRL_IVA2 */
 #define OMAP3430_RST3_IVA2_MASK				(1 << 2)
 #define OMAP3430_RST2_IVA2_MASK				(1 << 1)
 #define OMAP3430_RST1_IVA2_MASK				(1 << 0)
-
-/* RM_RSTST_IVA2 specific bits */
-#define OMAP3430_EMULATION_VSEQ_RST_MASK		(1 << 13)
-#define OMAP3430_EMULATION_VHWA_RST_MASK		(1 << 12)
-#define OMAP3430_EMULATION_IVA2_RST_MASK		(1 << 11)
-#define OMAP3430_IVA2_SW_RST3_MASK			(1 << 10)
-#define OMAP3430_IVA2_SW_RST2_MASK			(1 << 9)
-#define OMAP3430_IVA2_SW_RST1_MASK			(1 << 8)
-
-/* PM_WKDEP_IVA2 specific bits */
-
-/* PM_PWSTCTRL_IVA2 specific bits */
-#define OMAP3430_L2FLATMEMONSTATE_SHIFT			22
 #define OMAP3430_L2FLATMEMONSTATE_MASK			(0x3 << 22)
-#define OMAP3430_SHAREDL2CACHEFLATONSTATE_SHIFT		20
 #define OMAP3430_SHAREDL2CACHEFLATONSTATE_MASK		(0x3 << 20)
-#define OMAP3430_L1FLATMEMONSTATE_SHIFT			18
 #define OMAP3430_L1FLATMEMONSTATE_MASK			(0x3 << 18)
-#define OMAP3430_SHAREDL1CACHEFLATONSTATE_SHIFT		16
 #define OMAP3430_SHAREDL1CACHEFLATONSTATE_MASK		(0x3 << 16)
 #define OMAP3430_L2FLATMEMRETSTATE_MASK			(1 << 11)
 #define OMAP3430_SHAREDL2CACHEFLATRETSTATE_MASK		(1 << 10)
 #define OMAP3430_L1FLATMEMRETSTATE_MASK			(1 << 9)
 #define OMAP3430_SHAREDL1CACHEFLATRETSTATE_MASK		(1 << 8)
-
-/* PM_PWSTST_IVA2 specific bits */
-#define OMAP3430_L2FLATMEMSTATEST_SHIFT			10
 #define OMAP3430_L2FLATMEMSTATEST_MASK			(0x3 << 10)
-#define OMAP3430_SHAREDL2CACHEFLATSTATEST_SHIFT		8
 #define OMAP3430_SHAREDL2CACHEFLATSTATEST_MASK		(0x3 << 8)
-#define OMAP3430_L1FLATMEMSTATEST_SHIFT			6
 #define OMAP3430_L1FLATMEMSTATEST_MASK			(0x3 << 6)
-#define OMAP3430_SHAREDL1CACHEFLATSTATEST_SHIFT		4
 #define OMAP3430_SHAREDL1CACHEFLATSTATEST_MASK		(0x3 << 4)
-
-/* PM_PREPWSTST_IVA2 specific bits */
-#define OMAP3430_LASTL2FLATMEMSTATEENTERED_SHIFT		10
 #define OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK			(0x3 << 10)
-#define OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_SHIFT	8
 #define OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK		(0x3 << 8)
-#define OMAP3430_LASTL1FLATMEMSTATEENTERED_SHIFT		6
-#define OMAP3430_LASTL1FLATMEMSTATEENTERED_MASK			(0x3 << 6)
-#define OMAP3430_LASTSHAREDL1CACHEFLATSTATEENTERED_SHIFT	4
-#define OMAP3430_LASTSHAREDL1CACHEFLATSTATEENTERED_MASK		(0x3 << 4)
-
-/* PRM_IRQSTATUS_IVA2 specific bits */
-#define OMAP3430_PRM_IRQSTATUS_IVA2_IVA2_DPLL_ST_MASK	(1 << 2)
-#define OMAP3430_FORCEWKUP_ST_MASK			(1 << 1)
-
-/* PRM_IRQENABLE_IVA2 specific bits */
-#define OMAP3430_PRM_IRQENABLE_IVA2_IVA2_DPLL_RECAL_EN_MASK	(1 << 2)
-#define OMAP3430_FORCEWKUP_EN_MASK				(1 << 1)
-
-/* PRM_REVISION specific bits */
-
-/* PRM_SYSCONFIG specific bits */
-
-/* PRM_IRQSTATUS_MPU specific bits */
 #define OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT		25
-#define OMAP3430ES2_SND_PERIPH_DPLL_ST_MASK		(1 << 25)
-#define OMAP3430_VC_TIMEOUTERR_ST_MASK			(1 << 24)
-#define OMAP3430_VC_RAERR_ST_MASK			(1 << 23)
-#define OMAP3430_VC_SAERR_ST_MASK			(1 << 22)
 #define OMAP3430_VP2_TRANXDONE_ST_MASK			(1 << 21)
-#define OMAP3430_VP2_EQVALUE_ST_MASK			(1 << 20)
-#define OMAP3430_VP2_NOSMPSACK_ST_MASK			(1 << 19)
-#define OMAP3430_VP2_MAXVDD_ST_MASK			(1 << 18)
-#define OMAP3430_VP2_MINVDD_ST_MASK			(1 << 17)
-#define OMAP3430_VP2_OPPCHANGEDONE_ST_MASK		(1 << 16)
 #define OMAP3430_VP1_TRANXDONE_ST_MASK			(1 << 15)
-#define OMAP3430_VP1_EQVALUE_ST_MASK			(1 << 14)
-#define OMAP3430_VP1_NOSMPSACK_ST_MASK			(1 << 13)
-#define OMAP3430_VP1_MAXVDD_ST_MASK			(1 << 12)
-#define OMAP3430_VP1_MINVDD_ST_MASK			(1 << 11)
-#define OMAP3430_VP1_OPPCHANGEDONE_ST_MASK		(1 << 10)
-#define OMAP3430_IO_ST_MASK				(1 << 9)
-#define OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_MASK	(1 << 8)
 #define OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT	8
-#define OMAP3430_MPU_DPLL_ST_MASK			(1 << 7)
 #define OMAP3430_MPU_DPLL_ST_SHIFT			7
-#define OMAP3430_PERIPH_DPLL_ST_MASK			(1 << 6)
 #define OMAP3430_PERIPH_DPLL_ST_SHIFT			6
-#define OMAP3430_CORE_DPLL_ST_MASK			(1 << 5)
 #define OMAP3430_CORE_DPLL_ST_SHIFT			5
-#define OMAP3430_TRANSITION_ST_MASK			(1 << 4)
-#define OMAP3430_EVGENOFF_ST_MASK			(1 << 3)
-#define OMAP3430_EVGENON_ST_MASK			(1 << 2)
-#define OMAP3430_FS_USB_WKUP_ST_MASK			(1 << 1)
-
-/* PRM_IRQENABLE_MPU specific bits */
 #define OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT		25
-#define OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_MASK		(1 << 25)
-#define OMAP3430_VC_TIMEOUTERR_EN_MASK				(1 << 24)
-#define OMAP3430_VC_RAERR_EN_MASK				(1 << 23)
-#define OMAP3430_VC_SAERR_EN_MASK				(1 << 22)
-#define OMAP3430_VP2_TRANXDONE_EN_MASK				(1 << 21)
-#define OMAP3430_VP2_EQVALUE_EN_MASK				(1 << 20)
-#define OMAP3430_VP2_NOSMPSACK_EN_MASK				(1 << 19)
-#define OMAP3430_VP2_MAXVDD_EN_MASK				(1 << 18)
-#define OMAP3430_VP2_MINVDD_EN_MASK				(1 << 17)
-#define OMAP3430_VP2_OPPCHANGEDONE_EN_MASK			(1 << 16)
-#define OMAP3430_VP1_TRANXDONE_EN_MASK				(1 << 15)
-#define OMAP3430_VP1_EQVALUE_EN_MASK				(1 << 14)
-#define OMAP3430_VP1_NOSMPSACK_EN_MASK				(1 << 13)
-#define OMAP3430_VP1_MAXVDD_EN_MASK				(1 << 12)
-#define OMAP3430_VP1_MINVDD_EN_MASK				(1 << 11)
-#define OMAP3430_VP1_OPPCHANGEDONE_EN_MASK			(1 << 10)
-#define OMAP3430_IO_EN_MASK					(1 << 9)
-#define OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_MASK	(1 << 8)
 #define OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT	8
-#define OMAP3430_MPU_DPLL_RECAL_EN_MASK				(1 << 7)
 #define OMAP3430_MPU_DPLL_RECAL_EN_SHIFT			7
-#define OMAP3430_PERIPH_DPLL_RECAL_EN_MASK			(1 << 6)
 #define OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT			6
-#define OMAP3430_CORE_DPLL_RECAL_EN_MASK			(1 << 5)
 #define OMAP3430_CORE_DPLL_RECAL_EN_SHIFT			5
-#define OMAP3430_TRANSITION_EN_MASK				(1 << 4)
-#define OMAP3430_EVGENOFF_EN_MASK				(1 << 3)
-#define OMAP3430_EVGENON_EN_MASK				(1 << 2)
-#define OMAP3430_FS_USB_WKUP_EN_MASK				(1 << 1)
-
-/* RM_RSTST_MPU specific bits */
-#define OMAP3430_EMULATION_MPU_RST_MASK			(1 << 11)
-
-/* PM_WKDEP_MPU specific bits */
 #define OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT		5
-#define OMAP3430_PM_WKDEP_MPU_EN_DSS_MASK		(1 << 5)
 #define OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT		2
-#define OMAP3430_PM_WKDEP_MPU_EN_IVA2_MASK		(1 << 2)
-
-/* PM_EVGENCTRL_MPU */
-#define OMAP3430_OFFLOADMODE_SHIFT			3
-#define OMAP3430_OFFLOADMODE_MASK			(0x3 << 3)
-#define OMAP3430_ONLOADMODE_SHIFT			1
-#define OMAP3430_ONLOADMODE_MASK			(0x3 << 1)
-#define OMAP3430_ENABLE_MASK				(1 << 0)
-
-/* PM_EVGENONTIM_MPU */
-#define OMAP3430_ONTIMEVAL_SHIFT			0
-#define OMAP3430_ONTIMEVAL_MASK				(0xffffffff << 0)
-
-/* PM_EVGENOFFTIM_MPU */
-#define OMAP3430_OFFTIMEVAL_SHIFT			0
-#define OMAP3430_OFFTIMEVAL_MASK			(0xffffffff << 0)
-
-/* PM_PWSTCTRL_MPU specific bits */
-#define OMAP3430_L2CACHEONSTATE_SHIFT			16
-#define OMAP3430_L2CACHEONSTATE_MASK			(0x3 << 16)
-#define OMAP3430_L2CACHERETSTATE_MASK			(1 << 8)
-#define OMAP3430_LOGICL1CACHERETSTATE_MASK		(1 << 2)
-
-/* PM_PWSTST_MPU specific bits */
-#define OMAP3430_L2CACHESTATEST_SHIFT			6
-#define OMAP3430_L2CACHESTATEST_MASK			(0x3 << 6)
-#define OMAP3430_LOGICL1CACHESTATEST_MASK		(1 << 2)
-
-/* PM_PREPWSTST_MPU specific bits */
-#define OMAP3430_LASTL2CACHESTATEENTERED_SHIFT		6
-#define OMAP3430_LASTL2CACHESTATEENTERED_MASK		(0x3 << 6)
-#define OMAP3430_LASTLOGICL1CACHESTATEENTERED_MASK	(1 << 2)
-
-/* RM_RSTCTRL_CORE */
 #define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK		(1 << 1)
 #define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK		(1 << 0)
-
-/* RM_RSTST_CORE specific bits */
-#define OMAP3430_MODEM_SECURITY_VIOL_RST_MASK		(1 << 10)
-#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RSTPWRON_MASK	(1 << 9)
-#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RST_MASK	(1 << 8)
-
-/* PM_WKEN1_CORE specific bits */
-
-/* PM_MPUGRPSEL1_CORE specific bits */
-#define OMAP3430_GRPSEL_FSHOSTUSB_MASK			(1 << 5)
-
-/* PM_IVA2GRPSEL1_CORE specific bits */
-
-/* PM_WKST1_CORE specific bits */
-
-/* PM_PWSTCTRL_CORE specific bits */
-#define OMAP3430_MEM2ONSTATE_SHIFT			18
-#define OMAP3430_MEM2ONSTATE_MASK			(0x3 << 18)
-#define OMAP3430_MEM1ONSTATE_SHIFT			16
-#define OMAP3430_MEM1ONSTATE_MASK			(0x3 << 16)
-#define OMAP3430_MEM2RETSTATE_MASK			(1 << 9)
-#define OMAP3430_MEM1RETSTATE_MASK			(1 << 8)
-
-/* PM_PWSTST_CORE specific bits */
-#define OMAP3430_MEM2STATEST_SHIFT			6
-#define OMAP3430_MEM2STATEST_MASK			(0x3 << 6)
-#define OMAP3430_MEM1STATEST_SHIFT			4
-#define OMAP3430_MEM1STATEST_MASK			(0x3 << 4)
-
-/* PM_PREPWSTST_CORE specific bits */
-#define OMAP3430_LASTMEM2STATEENTERED_SHIFT		6
 #define OMAP3430_LASTMEM2STATEENTERED_MASK		(0x3 << 6)
-#define OMAP3430_LASTMEM1STATEENTERED_SHIFT		4
 #define OMAP3430_LASTMEM1STATEENTERED_MASK		(0x3 << 4)
-
-/* RM_RSTST_GFX specific bits */
-
-/* PM_WKDEP_GFX specific bits */
-#define OMAP3430_PM_WKDEP_GFX_EN_IVA2_MASK		(1 << 2)
-
-/* PM_PWSTCTRL_GFX specific bits */
-
-/* PM_PWSTST_GFX specific bits */
-
-/* PM_PREPWSTST_GFX specific bits */
-
-/* PM_WKEN_WKUP specific bits */
 #define OMAP3430_EN_IO_CHAIN_MASK			(1 << 16)
 #define OMAP3430_EN_IO_MASK				(1 << 8)
 #define OMAP3430_EN_GPIO1_MASK				(1 << 3)
-
-/* PM_MPUGRPSEL_WKUP specific bits */
-
-/* PM_IVA2GRPSEL_WKUP specific bits */
-
-/* PM_WKST_WKUP specific bits */
 #define OMAP3430_ST_IO_CHAIN_MASK			(1 << 16)
 #define OMAP3430_ST_IO_MASK				(1 << 8)
-
-/* PRM_CLKSEL */
 #define OMAP3430_SYS_CLKIN_SEL_SHIFT			0
-#define OMAP3430_SYS_CLKIN_SEL_MASK			(0x7 << 0)
 #define OMAP3430_SYS_CLKIN_SEL_WIDTH			3
-
-/* PRM_CLKOUT_CTRL */
-#define OMAP3430_CLKOUT_EN_MASK				(1 << 7)
 #define OMAP3430_CLKOUT_EN_SHIFT			7
-
-/* RM_RSTST_DSS specific bits */
-
-/* PM_WKEN_DSS */
 #define OMAP3430_PM_WKEN_DSS_EN_DSS_MASK		(1 << 0)
-
-/* PM_WKDEP_DSS specific bits */
-#define OMAP3430_PM_WKDEP_DSS_EN_IVA2_MASK		(1 << 2)
-
-/* PM_PWSTCTRL_DSS specific bits */
-
-/* PM_PWSTST_DSS specific bits */
-
-/* PM_PREPWSTST_DSS specific bits */
-
-/* RM_RSTST_CAM specific bits */
-
-/* PM_WKDEP_CAM specific bits */
-#define OMAP3430_PM_WKDEP_CAM_EN_IVA2_MASK		(1 << 2)
-
-/* PM_PWSTCTRL_CAM specific bits */
-
-/* PM_PWSTST_CAM specific bits */
-
-/* PM_PREPWSTST_CAM specific bits */
-
-/* PM_PWSTCTRL_USBHOST specific bits */
 #define OMAP3430ES2_SAVEANDRESTORE_SHIFT		4
-
-/* RM_RSTST_PER specific bits */
-
-/* PM_WKEN_PER specific bits */
-
-/* PM_MPUGRPSEL_PER specific bits */
-
-/* PM_IVA2GRPSEL_PER specific bits */
-
-/* PM_WKST_PER specific bits */
-
-/* PM_WKDEP_PER specific bits */
-#define OMAP3430_PM_WKDEP_PER_EN_IVA2_MASK		(1 << 2)
-
-/* PM_PWSTCTRL_PER specific bits */
-
-/* PM_PWSTST_PER specific bits */
-
-/* PM_PREPWSTST_PER specific bits */
-
-/* RM_RSTST_EMU specific bits */
-
-/* PM_PWSTST_EMU specific bits */
-
-/* PRM_VC_SMPS_SA */
 #define OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT		16
 #define OMAP3430_PRM_VC_SMPS_SA_SA1_MASK		(0x7f << 16)
 #define OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT		0
 #define OMAP3430_PRM_VC_SMPS_SA_SA0_MASK		(0x7f << 0)
-
-/* PRM_VC_SMPS_VOL_RA */
-#define OMAP3430_VOLRA1_SHIFT				16
 #define OMAP3430_VOLRA1_MASK				(0xff << 16)
-#define OMAP3430_VOLRA0_SHIFT				0
 #define OMAP3430_VOLRA0_MASK				(0xff << 0)
-
-/* PRM_VC_SMPS_CMD_RA */
-#define OMAP3430_CMDRA1_SHIFT				16
 #define OMAP3430_CMDRA1_MASK				(0xff << 16)
-#define OMAP3430_CMDRA0_SHIFT				0
 #define OMAP3430_CMDRA0_MASK				(0xff << 0)
-
-/* PRM_VC_CMD_VAL_0 specific bits */
 #define OMAP3430_VC_CMD_ON_SHIFT			24
 #define OMAP3430_VC_CMD_ON_MASK				(0xFF << 24)
 #define OMAP3430_VC_CMD_ONLP_SHIFT			16
-#define OMAP3430_VC_CMD_ONLP_MASK			(0xFF << 16)
 #define OMAP3430_VC_CMD_RET_SHIFT			8
-#define OMAP3430_VC_CMD_RET_MASK			(0xFF << 8)
 #define OMAP3430_VC_CMD_OFF_SHIFT			0
-#define OMAP3430_VC_CMD_OFF_MASK			(0xFF << 0)
-
-/* PRM_VC_CMD_VAL_1 specific bits */
-
-/* PRM_VC_CH_CONF */
-#define OMAP3430_CMD1_MASK				(1 << 20)
-#define OMAP3430_RACEN1_MASK				(1 << 19)
-#define OMAP3430_RAC1_MASK				(1 << 18)
-#define OMAP3430_RAV1_MASK				(1 << 17)
-#define OMAP3430_PRM_VC_CH_CONF_SA1_MASK		(1 << 16)
-#define OMAP3430_CMD0_MASK				(1 << 4)
-#define OMAP3430_RACEN0_MASK				(1 << 3)
-#define OMAP3430_RAC0_MASK				(1 << 2)
-#define OMAP3430_RAV0_MASK				(1 << 1)
-#define OMAP3430_PRM_VC_CH_CONF_SA0_MASK		(1 << 0)
-
-/* PRM_VC_I2C_CFG */
-#define OMAP3430_HSMASTER_MASK				(1 << 5)
-#define OMAP3430_SREN_MASK				(1 << 4)
 #define OMAP3430_HSEN_MASK				(1 << 3)
-#define OMAP3430_MCODE_SHIFT				0
 #define OMAP3430_MCODE_MASK				(0x7 << 0)
-
-/* PRM_VC_BYPASS_VAL */
 #define OMAP3430_VALID_MASK				(1 << 24)
 #define OMAP3430_DATA_SHIFT				16
-#define OMAP3430_DATA_MASK				(0xff << 16)
 #define OMAP3430_REGADDR_SHIFT				8
-#define OMAP3430_REGADDR_MASK				(0xff << 8)
 #define OMAP3430_SLAVEADDR_SHIFT			0
-#define OMAP3430_SLAVEADDR_MASK				(0x7f << 0)
-
-/* PRM_RSTCTRL */
-#define OMAP3430_RST_DPLL3_MASK				(1 << 2)
-#define OMAP3430_RST_GS_MASK				(1 << 1)
-
-/* PRM_RSTTIME */
-#define OMAP3430_RSTTIME2_SHIFT				8
-#define OMAP3430_RSTTIME2_MASK				(0x1f << 8)
-#define OMAP3430_RSTTIME1_SHIFT				0
-#define OMAP3430_RSTTIME1_MASK				(0xff << 0)
-
-/* PRM_RSTST */
 #define OMAP3430_ICECRUSHER_RST_SHIFT			10
-#define OMAP3430_ICECRUSHER_RST_MASK			(1 << 10)
 #define OMAP3430_ICEPICK_RST_SHIFT			9
-#define OMAP3430_ICEPICK_RST_MASK			(1 << 9)
 #define OMAP3430_VDD2_VOLTAGE_MANAGER_RST_SHIFT		8
-#define OMAP3430_VDD2_VOLTAGE_MANAGER_RST_MASK		(1 << 8)
 #define OMAP3430_VDD1_VOLTAGE_MANAGER_RST_SHIFT		7
-#define OMAP3430_VDD1_VOLTAGE_MANAGER_RST_MASK		(1 << 7)
 #define OMAP3430_EXTERNAL_WARM_RST_SHIFT		6
-#define OMAP3430_EXTERNAL_WARM_RST_MASK			(1 << 6)
 #define OMAP3430_SECURE_WD_RST_SHIFT			5
-#define OMAP3430_SECURE_WD_RST_MASK			(1 << 5)
 #define OMAP3430_MPU_WD_RST_SHIFT			4
-#define OMAP3430_MPU_WD_RST_MASK			(1 << 4)
 #define OMAP3430_SECURITY_VIOL_RST_SHIFT		3
-#define OMAP3430_SECURITY_VIOL_RST_MASK			(1 << 3)
 #define OMAP3430_GLOBAL_SW_RST_SHIFT			1
-#define OMAP3430_GLOBAL_SW_RST_MASK			(1 << 1)
 #define OMAP3430_GLOBAL_COLD_RST_SHIFT			0
 #define OMAP3430_GLOBAL_COLD_RST_MASK			(1 << 0)
-
-/* PRM_VOLTCTRL */
-#define OMAP3430_SEL_VMODE_MASK				(1 << 4)
 #define OMAP3430_SEL_OFF_MASK				(1 << 3)
 #define OMAP3430_AUTO_OFF_MASK				(1 << 2)
-#define OMAP3430_AUTO_RET_MASK				(1 << 1)
-#define OMAP3430_AUTO_SLEEP_MASK			(1 << 0)
-
-/* PRM_SRAM_PCHARGE */
-#define OMAP3430_PCHARGE_TIME_SHIFT			0
-#define OMAP3430_PCHARGE_TIME_MASK			(0xff << 0)
-
-/* PRM_CLKSRC_CTRL */
-#define OMAP3430_SYSCLKDIV_SHIFT			6
-#define OMAP3430_SYSCLKDIV_MASK				(0x3 << 6)
-#define OMAP3430_AUTOEXTCLKMODE_SHIFT			3
-#define OMAP3430_AUTOEXTCLKMODE_MASK			(0x3 << 3)
-#define OMAP3430_SYSCLKSEL_SHIFT			0
-#define OMAP3430_SYSCLKSEL_MASK				(0x3 << 0)
-
-/* PRM_VOLTSETUP1 */
-#define OMAP3430_SETUP_TIME2_SHIFT			16
 #define OMAP3430_SETUP_TIME2_MASK			(0xffff << 16)
-#define OMAP3430_SETUP_TIME1_SHIFT			0
 #define OMAP3430_SETUP_TIME1_MASK			(0xffff << 0)
-
-/* PRM_VOLTOFFSET */
-#define OMAP3430_OFFSET_TIME_SHIFT			0
-#define OMAP3430_OFFSET_TIME_MASK			(0xffff << 0)
-
-/* PRM_CLKSETUP */
-#define OMAP3430_SETUP_TIME_SHIFT			0
-#define OMAP3430_SETUP_TIME_MASK			(0xffff << 0)
-
-/* PRM_POLCTRL */
-#define OMAP3430_OFFMODE_POL_MASK			(1 << 3)
-#define OMAP3430_CLKOUT_POL_MASK			(1 << 2)
-#define OMAP3430_CLKREQ_POL_MASK			(1 << 1)
-#define OMAP3430_EXTVOL_POL_MASK			(1 << 0)
-
-/* PRM_VOLTSETUP2 */
-#define OMAP3430_OFFMODESETUPTIME_SHIFT			0
-#define OMAP3430_OFFMODESETUPTIME_MASK			(0xffff << 0)
-
-/* PRM_VP1_CONFIG specific bits */
-
-/* PRM_VP1_VSTEPMIN specific bits */
-
-/* PRM_VP1_VSTEPMAX specific bits */
-
-/* PRM_VP1_VLIMITTO specific bits */
-
-/* PRM_VP1_VOLTAGE specific bits */
-
-/* PRM_VP1_STATUS specific bits */
-
-/* PRM_VP2_CONFIG specific bits */
-
-/* PRM_VP2_VSTEPMIN specific bits */
-
-/* PRM_VP2_VSTEPMAX specific bits */
-
-/* PRM_VP2_VLIMITTO specific bits */
-
-/* PRM_VP2_VOLTAGE specific bits */
-
-/* PRM_VP2_STATUS specific bits */
-
-/* RM_RSTST_NEON specific bits */
-
-/* PM_WKDEP_NEON specific bits */
-
-/* PM_PWSTCTRL_NEON specific bits */
-
-/* PM_PWSTST_NEON specific bits */
-
-/* PM_PREPWSTST_NEON specific bits */
-
 #endif
diff --git a/arch/arm/mach-omap2/prm-regbits-44xx.h b/arch/arm/mach-omap2/prm-regbits-44xx.h
index 3cb247b..b1c7a33 100644
--- a/arch/arm/mach-omap2/prm-regbits-44xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-44xx.h
@@ -22,2306 +22,80 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_44XX_H
 #define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_44XX_H
 
-
-/*
- * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
- * PRM_LDO_SRAM_MPU_SETUP
- */
-#define OMAP4430_ABBOFF_ACT_EXPORT_SHIFT				1
-#define OMAP4430_ABBOFF_ACT_EXPORT_MASK					(1 << 1)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
- * PRM_LDO_SRAM_MPU_SETUP
- */
-#define OMAP4430_ABBOFF_SLEEP_EXPORT_SHIFT				2
-#define OMAP4430_ABBOFF_SLEEP_EXPORT_MASK				(1 << 2)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_ABB_IVA_DONE_EN_SHIFT					31
-#define OMAP4430_ABB_IVA_DONE_EN_MASK					(1 << 31)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_ABB_IVA_DONE_ST_SHIFT					31
-#define OMAP4430_ABB_IVA_DONE_ST_MASK					(1 << 31)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_ABB_MPU_DONE_EN_SHIFT					7
-#define OMAP4430_ABB_MPU_DONE_EN_MASK					(1 << 7)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_ABB_MPU_DONE_ST_SHIFT					7
-#define OMAP4430_ABB_MPU_DONE_ST_MASK					(1 << 7)
-
-/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
-#define OMAP4430_ACTIVE_FBB_SEL_SHIFT					2
-#define OMAP4430_ACTIVE_FBB_SEL_MASK					(1 << 2)
-
-/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
-#define OMAP4430_ACTIVE_RBB_SEL_SHIFT					1
-#define OMAP4430_ACTIVE_RBB_SEL_MASK					(1 << 1)
-
-/* Used by PM_ABE_PWRSTCTRL */
-#define OMAP4430_AESSMEM_ONSTATE_SHIFT					16
-#define OMAP4430_AESSMEM_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_ABE_PWRSTCTRL */
-#define OMAP4430_AESSMEM_RETSTATE_SHIFT					8
-#define OMAP4430_AESSMEM_RETSTATE_MASK					(1 << 8)
-
-/* Used by PM_ABE_PWRSTST */
-#define OMAP4430_AESSMEM_STATEST_SHIFT					4
-#define OMAP4430_AESSMEM_STATEST_MASK					(0x3 << 4)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
- * PRM_LDO_SRAM_MPU_SETUP
- */
-#define OMAP4430_AIPOFF_SHIFT						8
-#define OMAP4430_AIPOFF_MASK						(1 << 8)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP4430_AUTO_CTRL_VDD_CORE_L_SHIFT				0
-#define OMAP4430_AUTO_CTRL_VDD_CORE_L_MASK				(0x3 << 0)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP4430_AUTO_CTRL_VDD_IVA_L_SHIFT				4
-#define OMAP4430_AUTO_CTRL_VDD_IVA_L_MASK				(0x3 << 4)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP4430_AUTO_CTRL_VDD_MPU_L_SHIFT				2
-#define OMAP4430_AUTO_CTRL_VDD_MPU_L_MASK				(0x3 << 2)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_BYPS_RA_ERR_SHIFT					25
-#define OMAP4430_BYPS_RA_ERR_MASK					(1 << 25)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_BYPS_SA_ERR_SHIFT					24
-#define OMAP4430_BYPS_SA_ERR_MASK					(1 << 24)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_BYPS_TIMEOUT_ERR_SHIFT					26
-#define OMAP4430_BYPS_TIMEOUT_ERR_MASK					(1 << 26)
-
-/* Used by PRM_RSTST */
 #define OMAP4430_C2C_RST_SHIFT						10
-#define OMAP4430_C2C_RST_MASK						(1 << 10)
-
-/* Used by PM_CAM_PWRSTCTRL */
-#define OMAP4430_CAM_MEM_ONSTATE_SHIFT					16
-#define OMAP4430_CAM_MEM_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_CAM_PWRSTST */
-#define OMAP4430_CAM_MEM_STATEST_SHIFT					4
-#define OMAP4430_CAM_MEM_STATEST_MASK					(0x3 << 4)
-
-/* Used by PRM_CLKREQCTRL */
-#define OMAP4430_CLKREQ_COND_SHIFT					0
-#define OMAP4430_CLKREQ_COND_MASK					(0x7 << 0)
-
-/* Used by PRM_VC_VAL_SMPS_RA_CMD */
-#define OMAP4430_CMDRA_VDD_CORE_L_SHIFT					0
 #define OMAP4430_CMDRA_VDD_CORE_L_MASK					(0xff << 0)
-
-/* Used by PRM_VC_VAL_SMPS_RA_CMD */
-#define OMAP4430_CMDRA_VDD_IVA_L_SHIFT					8
 #define OMAP4430_CMDRA_VDD_IVA_L_MASK					(0xff << 8)
-
-/* Used by PRM_VC_VAL_SMPS_RA_CMD */
-#define OMAP4430_CMDRA_VDD_MPU_L_SHIFT					16
 #define OMAP4430_CMDRA_VDD_MPU_L_MASK					(0xff << 16)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_CMD_VDD_CORE_L_SHIFT					4
-#define OMAP4430_CMD_VDD_CORE_L_MASK					(1 << 4)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_CMD_VDD_IVA_L_SHIFT					12
-#define OMAP4430_CMD_VDD_IVA_L_MASK					(1 << 12)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_CMD_VDD_MPU_L_SHIFT					17
-#define OMAP4430_CMD_VDD_MPU_L_MASK					(1 << 17)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_CORE_OCMRAM_ONSTATE_SHIFT				18
-#define OMAP4430_CORE_OCMRAM_ONSTATE_MASK				(0x3 << 18)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_CORE_OCMRAM_RETSTATE_SHIFT				9
-#define OMAP4430_CORE_OCMRAM_RETSTATE_MASK				(1 << 9)
-
-/* Used by PM_CORE_PWRSTST */
-#define OMAP4430_CORE_OCMRAM_STATEST_SHIFT				6
-#define OMAP4430_CORE_OCMRAM_STATEST_MASK				(0x3 << 6)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_CORE_OTHER_BANK_ONSTATE_SHIFT				16
-#define OMAP4430_CORE_OTHER_BANK_ONSTATE_MASK				(0x3 << 16)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_CORE_OTHER_BANK_RETSTATE_SHIFT				8
-#define OMAP4430_CORE_OTHER_BANK_RETSTATE_MASK				(1 << 8)
-
-/* Used by PM_CORE_PWRSTST */
-#define OMAP4430_CORE_OTHER_BANK_STATEST_SHIFT				4
-#define OMAP4430_CORE_OTHER_BANK_STATEST_MASK				(0x3 << 4)
-
-/* Used by REVISION_PRM */
-#define OMAP4430_CUSTOM_SHIFT						6
-#define OMAP4430_CUSTOM_MASK						(0x3 << 6)
-
-/* Used by PRM_VC_VAL_BYPASS */
 #define OMAP4430_DATA_SHIFT						16
-#define OMAP4430_DATA_MASK						(0xff << 16)
-
-/* Used by PRM_DEVICE_OFF_CTRL */
-#define OMAP4430_DEVICE_OFF_ENABLE_SHIFT				0
-#define OMAP4430_DEVICE_OFF_ENABLE_MASK					(1 << 0)
-
-/* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP4430_DFILTEREN_SHIFT					6
-#define OMAP4430_DFILTEREN_MASK						(1 << 6)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
- * PRM_LDO_SRAM_MPU_SETUP, PRM_SRAM_WKUP_SETUP
- */
-#define OMAP4430_DISABLE_RTA_EXPORT_SHIFT				0
-#define OMAP4430_DISABLE_RTA_EXPORT_MASK				(1 << 0)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU, PRM_IRQENABLE_TESLA */
-#define OMAP4430_DPLL_ABE_RECAL_EN_SHIFT				4
-#define OMAP4430_DPLL_ABE_RECAL_EN_MASK					(1 << 4)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU, PRM_IRQSTATUS_TESLA */
-#define OMAP4430_DPLL_ABE_RECAL_ST_SHIFT				4
-#define OMAP4430_DPLL_ABE_RECAL_ST_MASK					(1 << 4)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_CORE_RECAL_EN_SHIFT				0
-#define OMAP4430_DPLL_CORE_RECAL_EN_MASK				(1 << 0)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_CORE_RECAL_ST_SHIFT				0
-#define OMAP4430_DPLL_CORE_RECAL_ST_MASK				(1 << 0)
-
-/* Used by PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_DDRPHY_RECAL_EN_SHIFT				6
-#define OMAP4430_DPLL_DDRPHY_RECAL_EN_MASK				(1 << 6)
-
-/* Used by PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_DDRPHY_RECAL_ST_SHIFT				6
-#define OMAP4430_DPLL_DDRPHY_RECAL_ST_MASK				(1 << 6)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU, PRM_IRQENABLE_TESLA */
-#define OMAP4430_DPLL_IVA_RECAL_EN_SHIFT				2
-#define OMAP4430_DPLL_IVA_RECAL_EN_MASK					(1 << 2)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU, PRM_IRQSTATUS_TESLA */
-#define OMAP4430_DPLL_IVA_RECAL_ST_SHIFT				2
-#define OMAP4430_DPLL_IVA_RECAL_ST_MASK					(1 << 2)
-
-/* Used by PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_MPU_RECAL_EN_SHIFT				1
-#define OMAP4430_DPLL_MPU_RECAL_EN_MASK					(1 << 1)
-
-/* Used by PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_MPU_RECAL_ST_SHIFT				1
-#define OMAP4430_DPLL_MPU_RECAL_ST_MASK					(1 << 1)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_PER_RECAL_EN_SHIFT				3
-#define OMAP4430_DPLL_PER_RECAL_EN_MASK					(1 << 3)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_PER_RECAL_ST_SHIFT				3
-#define OMAP4430_DPLL_PER_RECAL_ST_MASK					(1 << 3)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_UNIPRO_RECAL_EN_SHIFT				7
-#define OMAP4430_DPLL_UNIPRO_RECAL_EN_MASK				(1 << 7)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_UNIPRO_RECAL_ST_SHIFT				7
-#define OMAP4430_DPLL_UNIPRO_RECAL_ST_MASK				(1 << 7)
-
-/* Used by PM_DSS_PWRSTCTRL */
-#define OMAP4430_DSS_MEM_ONSTATE_SHIFT					16
-#define OMAP4430_DSS_MEM_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_DSS_PWRSTCTRL */
-#define OMAP4430_DSS_MEM_RETSTATE_SHIFT					8
-#define OMAP4430_DSS_MEM_RETSTATE_MASK					(1 << 8)
-
-/* Used by PM_DSS_PWRSTST */
-#define OMAP4430_DSS_MEM_STATEST_SHIFT					4
-#define OMAP4430_DSS_MEM_STATEST_MASK					(0x3 << 4)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_DUCATI_L2RAM_ONSTATE_SHIFT				20
-#define OMAP4430_DUCATI_L2RAM_ONSTATE_MASK				(0x3 << 20)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_DUCATI_L2RAM_RETSTATE_SHIFT				10
-#define OMAP4430_DUCATI_L2RAM_RETSTATE_MASK				(1 << 10)
-
-/* Used by PM_CORE_PWRSTST */
-#define OMAP4430_DUCATI_L2RAM_STATEST_SHIFT				8
-#define OMAP4430_DUCATI_L2RAM_STATEST_MASK				(0x3 << 8)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_DUCATI_UNICACHE_ONSTATE_SHIFT				22
-#define OMAP4430_DUCATI_UNICACHE_ONSTATE_MASK				(0x3 << 22)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_DUCATI_UNICACHE_RETSTATE_SHIFT				11
-#define OMAP4430_DUCATI_UNICACHE_RETSTATE_MASK				(1 << 11)
-
-/* Used by PM_CORE_PWRSTST */
-#define OMAP4430_DUCATI_UNICACHE_STATEST_SHIFT				10
-#define OMAP4430_DUCATI_UNICACHE_STATEST_MASK				(0x3 << 10)
-
-/* Used by PRM_DEVICE_OFF_CTRL */
-#define OMAP4460_EMIF1_OFFWKUP_DISABLE_SHIFT				8
-#define OMAP4460_EMIF1_OFFWKUP_DISABLE_MASK				(1 << 8)
-
-/* Used by PRM_DEVICE_OFF_CTRL */
-#define OMAP4460_EMIF2_OFFWKUP_DISABLE_SHIFT				9
-#define OMAP4460_EMIF2_OFFWKUP_DISABLE_MASK				(1 << 9)
-
-/* Used by RM_MPU_RSTST */
-#define OMAP4430_EMULATION_RST_SHIFT					0
-#define OMAP4430_EMULATION_RST_MASK					(1 << 0)
-
-/* Used by RM_DUCATI_RSTST */
-#define OMAP4430_EMULATION_RST1ST_SHIFT					3
-#define OMAP4430_EMULATION_RST1ST_MASK					(1 << 3)
-
-/* Used by RM_DUCATI_RSTST */
-#define OMAP4430_EMULATION_RST2ST_SHIFT					4
-#define OMAP4430_EMULATION_RST2ST_MASK					(1 << 4)
-
-/* Used by RM_IVAHD_RSTST */
-#define OMAP4430_EMULATION_SEQ1_RST1ST_SHIFT				3
-#define OMAP4430_EMULATION_SEQ1_RST1ST_MASK				(1 << 3)
-
-/* Used by RM_IVAHD_RSTST */
-#define OMAP4430_EMULATION_SEQ2_RST2ST_SHIFT				4
-#define OMAP4430_EMULATION_SEQ2_RST2ST_MASK				(1 << 4)
-
-/* Used by PM_EMU_PWRSTCTRL */
-#define OMAP4430_EMU_BANK_ONSTATE_SHIFT					16
-#define OMAP4430_EMU_BANK_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_EMU_PWRSTST */
-#define OMAP4430_EMU_BANK_STATEST_SHIFT					4
-#define OMAP4430_EMU_BANK_STATEST_MASK					(0x3 << 4)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
- * PRM_LDO_SRAM_MPU_SETUP
- */
-#define OMAP4430_ENFUNC1_EXPORT_SHIFT					3
-#define OMAP4430_ENFUNC1_EXPORT_MASK					(1 << 3)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
- * PRM_LDO_SRAM_MPU_SETUP
- */
-#define OMAP4430_ENFUNC3_EXPORT_SHIFT					5
-#define OMAP4430_ENFUNC3_EXPORT_MASK					(1 << 5)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
- * PRM_LDO_SRAM_MPU_SETUP
- */
-#define OMAP4430_ENFUNC4_SHIFT						6
-#define OMAP4430_ENFUNC4_MASK						(1 << 6)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
- * PRM_LDO_SRAM_MPU_SETUP
- */
-#define OMAP4430_ENFUNC5_SHIFT						7
-#define OMAP4430_ENFUNC5_MASK						(1 << 7)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_ERRORGAIN_SHIFT					16
 #define OMAP4430_ERRORGAIN_MASK						(0xff << 16)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_ERROROFFSET_SHIFT					24
 #define OMAP4430_ERROROFFSET_MASK					(0xff << 24)
-
-/* Used by PRM_RSTST */
 #define OMAP4430_EXTERNAL_WARM_RST_SHIFT				5
-#define OMAP4430_EXTERNAL_WARM_RST_MASK					(1 << 5)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_FORCEUPDATE_SHIFT					1
 #define OMAP4430_FORCEUPDATE_MASK					(1 << 1)
-
-/* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_IVA_VOLTAGE, PRM_VP_MPU_VOLTAGE */
-#define OMAP4430_FORCEUPDATEWAIT_SHIFT					8
-#define OMAP4430_FORCEUPDATEWAIT_MASK					(0xffffff << 8)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_TESLA */
-#define OMAP4430_FORCEWKUP_EN_SHIFT					10
-#define OMAP4430_FORCEWKUP_EN_MASK					(1 << 10)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_TESLA */
-#define OMAP4430_FORCEWKUP_ST_SHIFT					10
-#define OMAP4430_FORCEWKUP_ST_MASK					(1 << 10)
-
-/* Used by REVISION_PRM */
-#define OMAP4430_FUNC_SHIFT						16
-#define OMAP4430_FUNC_MASK						(0xfff << 16)
-
-/* Used by PM_GFX_PWRSTCTRL */
-#define OMAP4430_GFX_MEM_ONSTATE_SHIFT					16
-#define OMAP4430_GFX_MEM_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_GFX_PWRSTST */
-#define OMAP4430_GFX_MEM_STATEST_SHIFT					4
-#define OMAP4430_GFX_MEM_STATEST_MASK					(0x3 << 4)
-
-/* Used by PRM_RSTST */
 #define OMAP4430_GLOBAL_COLD_RST_SHIFT					0
-#define OMAP4430_GLOBAL_COLD_RST_MASK					(1 << 0)
-
-/* Used by PRM_RSTST */
 #define OMAP4430_GLOBAL_WARM_SW_RST_SHIFT				1
-#define OMAP4430_GLOBAL_WARM_SW_RST_MASK				(1 << 1)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP4430_GLOBAL_WUEN_SHIFT					16
 #define OMAP4430_GLOBAL_WUEN_MASK					(1 << 16)
-
-/* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP4430_HSMCODE_SHIFT						0
 #define OMAP4430_HSMCODE_MASK						(0x7 << 0)
-
-/* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP4430_HSMODEEN_SHIFT						3
 #define OMAP4430_HSMODEEN_MASK						(1 << 3)
-
-/* Used by PRM_VC_CFG_I2C_CLK */
-#define OMAP4430_HSSCLH_SHIFT						16
-#define OMAP4430_HSSCLH_MASK						(0xff << 16)
-
-/* Used by PRM_VC_CFG_I2C_CLK */
 #define OMAP4430_HSSCLL_SHIFT						24
-#define OMAP4430_HSSCLL_MASK						(0xff << 24)
-
-/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_HWA_MEM_ONSTATE_SHIFT					16
-#define OMAP4430_HWA_MEM_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_HWA_MEM_RETSTATE_SHIFT					8
-#define OMAP4430_HWA_MEM_RETSTATE_MASK					(1 << 8)
-
-/* Used by PM_IVAHD_PWRSTST */
-#define OMAP4430_HWA_MEM_STATEST_SHIFT					4
-#define OMAP4430_HWA_MEM_STATEST_MASK					(0x3 << 4)
-
-/* Used by RM_MPU_RSTST */
-#define OMAP4430_ICECRUSHER_MPU_RST_SHIFT				1
-#define OMAP4430_ICECRUSHER_MPU_RST_MASK				(1 << 1)
-
-/* Used by RM_DUCATI_RSTST */
-#define OMAP4430_ICECRUSHER_RST1ST_SHIFT				5
-#define OMAP4430_ICECRUSHER_RST1ST_MASK					(1 << 5)
-
-/* Used by RM_DUCATI_RSTST */
-#define OMAP4430_ICECRUSHER_RST2ST_SHIFT				6
-#define OMAP4430_ICECRUSHER_RST2ST_MASK					(1 << 6)
-
-/* Used by RM_IVAHD_RSTST */
-#define OMAP4430_ICECRUSHER_SEQ1_RST1ST_SHIFT				5
-#define OMAP4430_ICECRUSHER_SEQ1_RST1ST_MASK				(1 << 5)
-
-/* Used by RM_IVAHD_RSTST */
-#define OMAP4430_ICECRUSHER_SEQ2_RST2ST_SHIFT				6
-#define OMAP4430_ICECRUSHER_SEQ2_RST2ST_MASK				(1 << 6)
-
-/* Used by PRM_RSTST */
 #define OMAP4430_ICEPICK_RST_SHIFT					9
-#define OMAP4430_ICEPICK_RST_MASK					(1 << 9)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_INITVDD_SHIFT						2
 #define OMAP4430_INITVDD_MASK						(1 << 2)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_INITVOLTAGE_SHIFT					8
 #define OMAP4430_INITVOLTAGE_MASK					(0xff << 8)
-
-/*
- * Used by PM_ABE_PWRSTST, PM_CAM_PWRSTST, PM_CEFUSE_PWRSTST, PM_CORE_PWRSTST,
- * PM_DSS_PWRSTST, PM_EMU_PWRSTST, PM_GFX_PWRSTST, PM_IVAHD_PWRSTST,
- * PM_L3INIT_PWRSTST, PM_L4PER_PWRSTST, PM_MPU_PWRSTST, PM_TESLA_PWRSTST
- */
-#define OMAP4430_INTRANSITION_SHIFT					20
-#define OMAP4430_INTRANSITION_MASK					(1 << 20)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_IO_EN_SHIFT						9
-#define OMAP4430_IO_EN_MASK						(1 << 9)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP4430_IO_ON_STATUS_SHIFT					5
-#define OMAP4430_IO_ON_STATUS_MASK					(1 << 5)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_IO_ST_SHIFT						9
-#define OMAP4430_IO_ST_MASK						(1 << 9)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP4430_ISOCLK_OVERRIDE_SHIFT					0
-#define OMAP4430_ISOCLK_OVERRIDE_MASK					(1 << 0)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP4430_ISOCLK_STATUS_SHIFT					1
-#define OMAP4430_ISOCLK_STATUS_MASK					(1 << 1)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP4430_ISOOVR_EXTEND_SHIFT					4
-#define OMAP4430_ISOOVR_EXTEND_MASK					(1 << 4)
-
-/* Used by PRM_IO_COUNT */
-#define OMAP4430_ISO_2_ON_TIME_SHIFT					0
-#define OMAP4430_ISO_2_ON_TIME_MASK					(0xff << 0)
-
-/* Used by PM_L3INIT_PWRSTCTRL */
-#define OMAP4430_L3INIT_BANK1_ONSTATE_SHIFT				16
-#define OMAP4430_L3INIT_BANK1_ONSTATE_MASK				(0x3 << 16)
-
-/* Used by PM_L3INIT_PWRSTCTRL */
-#define OMAP4430_L3INIT_BANK1_RETSTATE_SHIFT				8
-#define OMAP4430_L3INIT_BANK1_RETSTATE_MASK				(1 << 8)
-
-/* Used by PM_L3INIT_PWRSTST */
-#define OMAP4430_L3INIT_BANK1_STATEST_SHIFT				4
-#define OMAP4430_L3INIT_BANK1_STATEST_MASK				(0x3 << 4)
-
-/*
- * Used by PM_ABE_PWRSTST, PM_CORE_PWRSTST, PM_IVAHD_PWRSTST,
- * PM_L3INIT_PWRSTST, PM_L4PER_PWRSTST, PM_MPU_PWRSTST, PM_TESLA_PWRSTST
- */
 #define OMAP4430_LASTPOWERSTATEENTERED_SHIFT				24
 #define OMAP4430_LASTPOWERSTATEENTERED_MASK				(0x3 << 24)
-
-/*
- * Used by PM_ABE_PWRSTCTRL, PM_CORE_PWRSTCTRL, PM_DSS_PWRSTCTRL,
- * PM_IVAHD_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, PM_L4PER_PWRSTCTRL,
- * PM_MPU_PWRSTCTRL, PM_TESLA_PWRSTCTRL
- */
 #define OMAP4430_LOGICRETSTATE_SHIFT					2
 #define OMAP4430_LOGICRETSTATE_MASK					(1 << 2)
-
-/*
- * Used by PM_ABE_PWRSTST, PM_CAM_PWRSTST, PM_CEFUSE_PWRSTST, PM_CORE_PWRSTST,
- * PM_DSS_PWRSTST, PM_EMU_PWRSTST, PM_GFX_PWRSTST, PM_IVAHD_PWRSTST,
- * PM_L3INIT_PWRSTST, PM_L4PER_PWRSTST, PM_MPU_PWRSTST, PM_TESLA_PWRSTST
- */
 #define OMAP4430_LOGICSTATEST_SHIFT					2
 #define OMAP4430_LOGICSTATEST_MASK					(1 << 2)
-
-/*
- * Used by RM_ABE_AESS_CONTEXT, RM_ABE_DMIC_CONTEXT, RM_ABE_MCASP_CONTEXT,
- * RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT, RM_ABE_MCBSP3_CONTEXT,
- * RM_ABE_PDM_CONTEXT, RM_ABE_SLIMBUS_CONTEXT, RM_ABE_TIMER5_CONTEXT,
- * RM_ABE_TIMER6_CONTEXT, RM_ABE_TIMER7_CONTEXT, RM_ABE_TIMER8_CONTEXT,
- * RM_ABE_WDT3_CONTEXT, RM_ALWON_MDMINTC_CONTEXT, RM_ALWON_SR_CORE_CONTEXT,
- * RM_ALWON_SR_IVA_CONTEXT, RM_ALWON_SR_MPU_CONTEXT, RM_CAM_FDIF_CONTEXT,
- * RM_CAM_ISS_CONTEXT, RM_CEFUSE_CEFUSE_CONTEXT, RM_D2D_SAD2D_CONTEXT,
- * RM_D2D_SAD2D_FW_CONTEXT, RM_DSS_DEISS_CONTEXT, RM_DSS_DSS_CONTEXT,
- * RM_DUCATI_DUCATI_CONTEXT, RM_EMU_DEBUGSS_CONTEXT, RM_GFX_GFX_CONTEXT,
- * RM_IVAHD_IVAHD_CONTEXT, RM_IVAHD_SL2_CONTEXT, RM_L3INIT_CCPTX_CONTEXT,
- * RM_L3INIT_EMAC_CONTEXT, RM_L3INIT_P1500_CONTEXT, RM_L3INIT_PCIESS_CONTEXT,
- * RM_L3INIT_SATA_CONTEXT, RM_L3INIT_TPPSS_CONTEXT, RM_L3INIT_UNIPRO1_CONTEXT,
- * RM_L3INIT_USBPHYOCP2SCP_CONTEXT, RM_L3INIT_XHPI_CONTEXT,
- * RM_L3INSTR_L3_3_CONTEXT, RM_L3INSTR_L3_INSTR_CONTEXT,
- * RM_L3INSTR_OCP_WP1_CONTEXT, RM_L3_1_L3_1_CONTEXT, RM_L3_2_L3_2_CONTEXT,
- * RM_L3_2_OCMC_RAM_CONTEXT, RM_L4CFG_L4_CFG_CONTEXT, RM_L4CFG_SAR_ROM_CONTEXT,
- * RM_L4PER_ADC_CONTEXT, RM_L4PER_DMTIMER10_CONTEXT,
- * RM_L4PER_DMTIMER11_CONTEXT, RM_L4PER_DMTIMER2_CONTEXT,
- * RM_L4PER_DMTIMER3_CONTEXT, RM_L4PER_DMTIMER4_CONTEXT,
- * RM_L4PER_DMTIMER9_CONTEXT, RM_L4PER_ELM_CONTEXT, RM_L4PER_HDQ1W_CONTEXT,
- * RM_L4PER_HECC1_CONTEXT, RM_L4PER_HECC2_CONTEXT, RM_L4PER_I2C2_CONTEXT,
- * RM_L4PER_I2C3_CONTEXT, RM_L4PER_I2C4_CONTEXT, RM_L4PER_I2C5_CONTEXT,
- * RM_L4PER_L4_PER_CONTEXT, RM_L4PER_MCASP2_CONTEXT, RM_L4PER_MCASP3_CONTEXT,
- * RM_L4PER_MCBSP4_CONTEXT, RM_L4PER_MCSPI1_CONTEXT, RM_L4PER_MCSPI2_CONTEXT,
- * RM_L4PER_MCSPI3_CONTEXT, RM_L4PER_MCSPI4_CONTEXT, RM_L4PER_MGATE_CONTEXT,
- * RM_L4PER_MMCSD3_CONTEXT, RM_L4PER_MMCSD4_CONTEXT, RM_L4PER_MMCSD5_CONTEXT,
- * RM_L4PER_MSPROHG_CONTEXT, RM_L4PER_SLIMBUS2_CONTEXT,
- * RM_L4SEC_PKAEIP29_CONTEXT, RM_MEMIF_DLL_CONTEXT, RM_MEMIF_DLL_H_CONTEXT,
- * RM_MEMIF_DMM_CONTEXT, RM_MEMIF_EMIF_1_CONTEXT, RM_MEMIF_EMIF_2_CONTEXT,
- * RM_MEMIF_EMIF_FW_CONTEXT, RM_MPU_MPU_CONTEXT, RM_TESLA_TESLA_CONTEXT,
- * RM_WKUP_GPIO1_CONTEXT, RM_WKUP_KEYBOARD_CONTEXT, RM_WKUP_L4WKUP_CONTEXT,
- * RM_WKUP_RTC_CONTEXT, RM_WKUP_SARRAM_CONTEXT, RM_WKUP_SYNCTIMER_CONTEXT,
- * RM_WKUP_TIMER12_CONTEXT, RM_WKUP_TIMER1_CONTEXT, RM_WKUP_USIM_CONTEXT,
- * RM_WKUP_WDT1_CONTEXT, RM_WKUP_WDT2_CONTEXT
- */
-#define OMAP4430_LOSTCONTEXT_DFF_SHIFT					0
 #define OMAP4430_LOSTCONTEXT_DFF_MASK					(1 << 0)
-
-/*
- * Used by RM_D2D_MODEM_ICR_CONTEXT, RM_D2D_SAD2D_CONTEXT,
- * RM_D2D_SAD2D_FW_CONTEXT, RM_DSS_DSS_CONTEXT, RM_DUCATI_DUCATI_CONTEXT,
- * RM_L3INIT_HSI_CONTEXT, RM_L3INIT_MMC1_CONTEXT, RM_L3INIT_MMC2_CONTEXT,
- * RM_L3INIT_MMC6_CONTEXT, RM_L3INIT_USB_HOST_CONTEXT,
- * RM_L3INIT_USB_HOST_FS_CONTEXT, RM_L3INIT_USB_OTG_CONTEXT,
- * RM_L3INIT_USB_TLL_CONTEXT, RM_L3INSTR_L3_3_CONTEXT,
- * RM_L3INSTR_OCP_WP1_CONTEXT, RM_L3_1_L3_1_CONTEXT, RM_L3_2_GPMC_CONTEXT,
- * RM_L3_2_L3_2_CONTEXT, RM_L4CFG_HW_SEM_CONTEXT, RM_L4CFG_L4_CFG_CONTEXT,
- * RM_L4CFG_MAILBOX_CONTEXT, RM_L4PER_GPIO2_CONTEXT, RM_L4PER_GPIO3_CONTEXT,
- * RM_L4PER_GPIO4_CONTEXT, RM_L4PER_GPIO5_CONTEXT, RM_L4PER_GPIO6_CONTEXT,
- * RM_L4PER_I2C1_CONTEXT, RM_L4PER_L4_PER_CONTEXT, RM_L4PER_UART1_CONTEXT,
- * RM_L4PER_UART2_CONTEXT, RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT,
- * RM_L4SEC_AES1_CONTEXT, RM_L4SEC_AES2_CONTEXT, RM_L4SEC_CRYPTODMA_CONTEXT,
- * RM_L4SEC_DES3DES_CONTEXT, RM_L4SEC_RNG_CONTEXT, RM_L4SEC_SHA2MD51_CONTEXT,
- * RM_MEMIF_DMM_CONTEXT, RM_MEMIF_EMIF_1_CONTEXT, RM_MEMIF_EMIF_2_CONTEXT,
- * RM_MEMIF_EMIF_FW_CONTEXT, RM_MEMIF_EMIF_H1_CONTEXT,
- * RM_MEMIF_EMIF_H2_CONTEXT, RM_SDMA_SDMA_CONTEXT, RM_TESLA_TESLA_CONTEXT
- */
-#define OMAP4430_LOSTCONTEXT_RFF_SHIFT					1
-#define OMAP4430_LOSTCONTEXT_RFF_MASK					(1 << 1)
-
-/* Used by RM_ABE_AESS_CONTEXT */
-#define OMAP4430_LOSTMEM_AESSMEM_SHIFT					8
 #define OMAP4430_LOSTMEM_AESSMEM_MASK					(1 << 8)
-
-/* Used by RM_CAM_FDIF_CONTEXT, RM_CAM_ISS_CONTEXT */
-#define OMAP4430_LOSTMEM_CAM_MEM_SHIFT					8
-#define OMAP4430_LOSTMEM_CAM_MEM_MASK					(1 << 8)
-
-/* Used by RM_L3INSTR_OCP_WP1_CONTEXT */
-#define OMAP4430_LOSTMEM_CORE_NRET_BANK_SHIFT				8
-#define OMAP4430_LOSTMEM_CORE_NRET_BANK_MASK				(1 << 8)
-
-/* Renamed from LOSTMEM_CORE_NRET_BANK Used by RM_MEMIF_DMM_CONTEXT */
-#define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_SHIFT			9
-#define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_MASK			(1 << 9)
-
-/* Used by RM_L3_2_OCMC_RAM_CONTEXT */
-#define OMAP4430_LOSTMEM_CORE_OCMRAM_SHIFT				8
-#define OMAP4430_LOSTMEM_CORE_OCMRAM_MASK				(1 << 8)
-
-/*
- * Used by RM_D2D_MODEM_ICR_CONTEXT, RM_MEMIF_DMM_CONTEXT,
- * RM_SDMA_SDMA_CONTEXT
- */
-#define OMAP4430_LOSTMEM_CORE_OTHER_BANK_SHIFT				8
-#define OMAP4430_LOSTMEM_CORE_OTHER_BANK_MASK				(1 << 8)
-
-/* Used by RM_DSS_DEISS_CONTEXT, RM_DSS_DSS_CONTEXT */
-#define OMAP4430_LOSTMEM_DSS_MEM_SHIFT					8
-#define OMAP4430_LOSTMEM_DSS_MEM_MASK					(1 << 8)
-
-/* Used by RM_DUCATI_DUCATI_CONTEXT */
-#define OMAP4430_LOSTMEM_DUCATI_L2RAM_SHIFT				9
-#define OMAP4430_LOSTMEM_DUCATI_L2RAM_MASK				(1 << 9)
-
-/* Used by RM_DUCATI_DUCATI_CONTEXT */
-#define OMAP4430_LOSTMEM_DUCATI_UNICACHE_SHIFT				8
-#define OMAP4430_LOSTMEM_DUCATI_UNICACHE_MASK				(1 << 8)
-
-/* Used by RM_EMU_DEBUGSS_CONTEXT */
-#define OMAP4430_LOSTMEM_EMU_BANK_SHIFT					8
-#define OMAP4430_LOSTMEM_EMU_BANK_MASK					(1 << 8)
-
-/* Used by RM_GFX_GFX_CONTEXT */
-#define OMAP4430_LOSTMEM_GFX_MEM_SHIFT					8
-#define OMAP4430_LOSTMEM_GFX_MEM_MASK					(1 << 8)
-
-/* Used by RM_IVAHD_IVAHD_CONTEXT */
-#define OMAP4430_LOSTMEM_HWA_MEM_SHIFT					10
-#define OMAP4430_LOSTMEM_HWA_MEM_MASK					(1 << 10)
-
-/*
- * Used by RM_L3INIT_CCPTX_CONTEXT, RM_L3INIT_EMAC_CONTEXT,
- * RM_L3INIT_HSI_CONTEXT, RM_L3INIT_MMC1_CONTEXT, RM_L3INIT_MMC2_CONTEXT,
- * RM_L3INIT_MMC6_CONTEXT, RM_L3INIT_PCIESS_CONTEXT, RM_L3INIT_SATA_CONTEXT,
- * RM_L3INIT_TPPSS_CONTEXT, RM_L3INIT_UNIPRO1_CONTEXT,
- * RM_L3INIT_USB_OTG_CONTEXT, RM_L3INIT_XHPI_CONTEXT
- */
-#define OMAP4430_LOSTMEM_L3INIT_BANK1_SHIFT				8
-#define OMAP4430_LOSTMEM_L3INIT_BANK1_MASK				(1 << 8)
-
-/* Used by RM_MPU_MPU_CONTEXT */
-#define OMAP4430_LOSTMEM_MPU_L1_SHIFT					8
-#define OMAP4430_LOSTMEM_MPU_L1_MASK					(1 << 8)
-
-/* Used by RM_MPU_MPU_CONTEXT */
-#define OMAP4430_LOSTMEM_MPU_L2_SHIFT					9
-#define OMAP4430_LOSTMEM_MPU_L2_MASK					(1 << 9)
-
-/* Used by RM_MPU_MPU_CONTEXT */
-#define OMAP4430_LOSTMEM_MPU_RAM_SHIFT					10
-#define OMAP4430_LOSTMEM_MPU_RAM_MASK					(1 << 10)
-
-/*
- * Used by RM_L4PER_HECC1_CONTEXT, RM_L4PER_HECC2_CONTEXT,
- * RM_L4PER_MCBSP4_CONTEXT, RM_L4PER_MMCSD3_CONTEXT, RM_L4PER_MMCSD4_CONTEXT,
- * RM_L4PER_MMCSD5_CONTEXT, RM_L4PER_SLIMBUS2_CONTEXT, RM_L4SEC_PKAEIP29_CONTEXT
- */
-#define OMAP4430_LOSTMEM_NONRETAINED_BANK_SHIFT				8
-#define OMAP4430_LOSTMEM_NONRETAINED_BANK_MASK				(1 << 8)
-
-/*
- * Used by RM_ABE_DMIC_CONTEXT, RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT,
- * RM_ABE_MCBSP3_CONTEXT, RM_ABE_PDM_CONTEXT, RM_ABE_SLIMBUS_CONTEXT
- */
-#define OMAP4430_LOSTMEM_PERIHPMEM_SHIFT				8
-#define OMAP4430_LOSTMEM_PERIHPMEM_MASK					(1 << 8)
-
-/*
- * Used by RM_L4PER_MSPROHG_CONTEXT, RM_L4PER_UART1_CONTEXT,
- * RM_L4PER_UART2_CONTEXT, RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT,
- * RM_L4SEC_CRYPTODMA_CONTEXT
- */
-#define OMAP4430_LOSTMEM_RETAINED_BANK_SHIFT				8
-#define OMAP4430_LOSTMEM_RETAINED_BANK_MASK				(1 << 8)
-
-/* Used by RM_IVAHD_SL2_CONTEXT */
-#define OMAP4430_LOSTMEM_SL2_MEM_SHIFT					8
-#define OMAP4430_LOSTMEM_SL2_MEM_MASK					(1 << 8)
-
-/* Used by RM_IVAHD_IVAHD_CONTEXT */
-#define OMAP4430_LOSTMEM_TCM1_MEM_SHIFT					8
-#define OMAP4430_LOSTMEM_TCM1_MEM_MASK					(1 << 8)
-
-/* Used by RM_IVAHD_IVAHD_CONTEXT */
-#define OMAP4430_LOSTMEM_TCM2_MEM_SHIFT					9
-#define OMAP4430_LOSTMEM_TCM2_MEM_MASK					(1 << 9)
-
-/* Used by RM_TESLA_TESLA_CONTEXT */
-#define OMAP4430_LOSTMEM_TESLA_EDMA_SHIFT				10
-#define OMAP4430_LOSTMEM_TESLA_EDMA_MASK				(1 << 10)
-
-/* Used by RM_TESLA_TESLA_CONTEXT */
-#define OMAP4430_LOSTMEM_TESLA_L1_SHIFT					8
-#define OMAP4430_LOSTMEM_TESLA_L1_MASK					(1 << 8)
-
-/* Used by RM_TESLA_TESLA_CONTEXT */
-#define OMAP4430_LOSTMEM_TESLA_L2_SHIFT					9
-#define OMAP4430_LOSTMEM_TESLA_L2_MASK					(1 << 9)
-
-/* Used by RM_WKUP_SARRAM_CONTEXT */
-#define OMAP4430_LOSTMEM_WKUP_BANK_SHIFT				8
-#define OMAP4430_LOSTMEM_WKUP_BANK_MASK					(1 << 8)
-
-/*
- * Used by PM_ABE_PWRSTCTRL, PM_CAM_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL,
- * PM_CORE_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_GFX_PWRSTCTRL, PM_IVAHD_PWRSTCTRL,
- * PM_L3INIT_PWRSTCTRL, PM_L4PER_PWRSTCTRL, PM_MPU_PWRSTCTRL, PM_TESLA_PWRSTCTRL
- */
 #define OMAP4430_LOWPOWERSTATECHANGE_SHIFT				4
 #define OMAP4430_LOWPOWERSTATECHANGE_MASK				(1 << 4)
-
-/* Used by PRM_MODEM_IF_CTRL */
-#define OMAP4430_MODEM_READY_SHIFT					1
-#define OMAP4430_MODEM_READY_MASK					(1 << 1)
-
-/* Used by PRM_MODEM_IF_CTRL */
-#define OMAP4430_MODEM_SHUTDOWN_IRQ_SHIFT				9
-#define OMAP4430_MODEM_SHUTDOWN_IRQ_MASK				(1 << 9)
-
-/* Used by PRM_MODEM_IF_CTRL */
-#define OMAP4430_MODEM_SLEEP_ST_SHIFT					16
-#define OMAP4430_MODEM_SLEEP_ST_MASK					(1 << 16)
-
-/* Used by PRM_MODEM_IF_CTRL */
-#define OMAP4430_MODEM_WAKE_IRQ_SHIFT					8
-#define OMAP4430_MODEM_WAKE_IRQ_MASK					(1 << 8)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_L1_ONSTATE_SHIFT					16
-#define OMAP4430_MPU_L1_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_L1_RETSTATE_SHIFT					8
-#define OMAP4430_MPU_L1_RETSTATE_MASK					(1 << 8)
-
-/* Used by PM_MPU_PWRSTST */
-#define OMAP4430_MPU_L1_STATEST_SHIFT					4
-#define OMAP4430_MPU_L1_STATEST_MASK					(0x3 << 4)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_L2_ONSTATE_SHIFT					18
-#define OMAP4430_MPU_L2_ONSTATE_MASK					(0x3 << 18)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_L2_RETSTATE_SHIFT					9
-#define OMAP4430_MPU_L2_RETSTATE_MASK					(1 << 9)
-
-/* Used by PM_MPU_PWRSTST */
-#define OMAP4430_MPU_L2_STATEST_SHIFT					6
-#define OMAP4430_MPU_L2_STATEST_MASK					(0x3 << 6)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_RAM_ONSTATE_SHIFT					20
-#define OMAP4430_MPU_RAM_ONSTATE_MASK					(0x3 << 20)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_RAM_RETSTATE_SHIFT					10
-#define OMAP4430_MPU_RAM_RETSTATE_MASK					(1 << 10)
-
-/* Used by PM_MPU_PWRSTST */
-#define OMAP4430_MPU_RAM_STATEST_SHIFT					8
-#define OMAP4430_MPU_RAM_STATEST_MASK					(0x3 << 8)
-
-/* Used by PRM_RSTST */
 #define OMAP4430_MPU_SECURITY_VIOL_RST_SHIFT				2
-#define OMAP4430_MPU_SECURITY_VIOL_RST_MASK				(1 << 2)
-
-/* Used by PRM_RSTST */
 #define OMAP4430_MPU_WDT_RST_SHIFT					3
-#define OMAP4430_MPU_WDT_RST_MASK					(1 << 3)
-
-/* Used by PM_L4PER_PWRSTCTRL */
-#define OMAP4430_NONRETAINED_BANK_ONSTATE_SHIFT				18
-#define OMAP4430_NONRETAINED_BANK_ONSTATE_MASK				(0x3 << 18)
-
-/* Used by PM_L4PER_PWRSTCTRL */
-#define OMAP4430_NONRETAINED_BANK_RETSTATE_SHIFT			9
-#define OMAP4430_NONRETAINED_BANK_RETSTATE_MASK				(1 << 9)
-
-/* Used by PM_L4PER_PWRSTST */
-#define OMAP4430_NONRETAINED_BANK_STATEST_SHIFT				6
-#define OMAP4430_NONRETAINED_BANK_STATEST_MASK				(0x3 << 6)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_OCP_NRET_BANK_ONSTATE_SHIFT				24
 #define OMAP4430_OCP_NRET_BANK_ONSTATE_MASK				(0x3 << 24)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_OCP_NRET_BANK_RETSTATE_SHIFT				12
 #define OMAP4430_OCP_NRET_BANK_RETSTATE_MASK				(1 << 12)
-
-/* Used by PM_CORE_PWRSTST */
-#define OMAP4430_OCP_NRET_BANK_STATEST_SHIFT				12
 #define OMAP4430_OCP_NRET_BANK_STATEST_MASK				(0x3 << 12)
-
-/*
- * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
- * PRM_VC_VAL_CMD_VDD_MPU_L
- */
 #define OMAP4430_OFF_SHIFT						0
-#define OMAP4430_OFF_MASK						(0xff << 0)
-
-/*
- * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
- * PRM_VC_VAL_CMD_VDD_MPU_L
- */
 #define OMAP4430_ON_SHIFT						24
 #define OMAP4430_ON_MASK						(0xff << 24)
-
-/*
- * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
- * PRM_VC_VAL_CMD_VDD_MPU_L
- */
 #define OMAP4430_ONLP_SHIFT						16
-#define OMAP4430_ONLP_MASK						(0xff << 16)
-
-/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
-#define OMAP4430_OPP_CHANGE_SHIFT					2
-#define OMAP4430_OPP_CHANGE_MASK					(1 << 2)
-
-/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
-#define OMAP4430_OPP_SEL_SHIFT						0
-#define OMAP4430_OPP_SEL_MASK						(0x3 << 0)
-
-/* Used by PRM_SRAM_COUNT */
-#define OMAP4430_PCHARGECNT_VALUE_SHIFT					0
-#define OMAP4430_PCHARGECNT_VALUE_MASK					(0x3f << 0)
-
-/* Used by PRM_PSCON_COUNT */
-#define OMAP4430_PCHARGE_TIME_SHIFT					0
-#define OMAP4430_PCHARGE_TIME_MASK					(0xff << 0)
-
-/* Used by PM_ABE_PWRSTCTRL */
-#define OMAP4430_PERIPHMEM_ONSTATE_SHIFT				20
-#define OMAP4430_PERIPHMEM_ONSTATE_MASK					(0x3 << 20)
-
-/* Used by PM_ABE_PWRSTCTRL */
-#define OMAP4430_PERIPHMEM_RETSTATE_SHIFT				10
-#define OMAP4430_PERIPHMEM_RETSTATE_MASK				(1 << 10)
-
-/* Used by PM_ABE_PWRSTST */
-#define OMAP4430_PERIPHMEM_STATEST_SHIFT				8
-#define OMAP4430_PERIPHMEM_STATEST_MASK					(0x3 << 8)
-
-/* Used by PRM_PHASE1_CNDP */
-#define OMAP4430_PHASE1_CNDP_SHIFT					0
-#define OMAP4430_PHASE1_CNDP_MASK					(0xffffffff << 0)
-
-/* Used by PRM_PHASE2A_CNDP */
-#define OMAP4430_PHASE2A_CNDP_SHIFT					0
-#define OMAP4430_PHASE2A_CNDP_MASK					(0xffffffff << 0)
-
-/* Used by PRM_PHASE2B_CNDP */
-#define OMAP4430_PHASE2B_CNDP_SHIFT					0
-#define OMAP4430_PHASE2B_CNDP_MASK					(0xffffffff << 0)
-
-/* Used by PRM_PSCON_COUNT */
-#define OMAP4430_PONOUT_2_PGOODIN_TIME_SHIFT				8
-#define OMAP4430_PONOUT_2_PGOODIN_TIME_MASK				(0xff << 8)
-
-/*
- * Used by PM_ABE_PWRSTCTRL, PM_CAM_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL,
- * PM_CORE_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_EMU_PWRSTCTRL, PM_GFX_PWRSTCTRL,
- * PM_IVAHD_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, PM_L4PER_PWRSTCTRL,
- * PM_MPU_PWRSTCTRL, PM_TESLA_PWRSTCTRL
- */
-#define OMAP4430_POWERSTATE_SHIFT					0
-#define OMAP4430_POWERSTATE_MASK					(0x3 << 0)
-
-/*
- * Used by PM_ABE_PWRSTST, PM_CAM_PWRSTST, PM_CEFUSE_PWRSTST, PM_CORE_PWRSTST,
- * PM_DSS_PWRSTST, PM_EMU_PWRSTST, PM_GFX_PWRSTST, PM_IVAHD_PWRSTST,
- * PM_L3INIT_PWRSTST, PM_L4PER_PWRSTST, PM_MPU_PWRSTST, PM_TESLA_PWRSTST
- */
-#define OMAP4430_POWERSTATEST_SHIFT					0
-#define OMAP4430_POWERSTATEST_MASK					(0x3 << 0)
-
-/* Used by PRM_PWRREQCTRL */
-#define OMAP4430_PWRREQ_COND_SHIFT					0
-#define OMAP4430_PWRREQ_COND_MASK					(0x3 << 0)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RACEN_VDD_CORE_L_SHIFT					3
-#define OMAP4430_RACEN_VDD_CORE_L_MASK					(1 << 3)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RACEN_VDD_IVA_L_SHIFT					11
-#define OMAP4430_RACEN_VDD_IVA_L_MASK					(1 << 11)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RACEN_VDD_MPU_L_SHIFT					20
-#define OMAP4430_RACEN_VDD_MPU_L_MASK					(1 << 20)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAC_VDD_CORE_L_SHIFT					2
-#define OMAP4430_RAC_VDD_CORE_L_MASK					(1 << 2)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAC_VDD_IVA_L_SHIFT					10
-#define OMAP4430_RAC_VDD_IVA_L_MASK					(1 << 10)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAC_VDD_MPU_L_SHIFT					19
-#define OMAP4430_RAC_VDD_MPU_L_MASK					(1 << 19)
-
-/*
- * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
- * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
- * PRM_VOLTSETUP_MPU_RET_SLEEP
- */
 #define OMAP4430_RAMP_DOWN_COUNT_SHIFT					16
-#define OMAP4430_RAMP_DOWN_COUNT_MASK					(0x3f << 16)
-
-/*
- * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
- * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
- * PRM_VOLTSETUP_MPU_RET_SLEEP
- */
-#define OMAP4430_RAMP_DOWN_PRESCAL_SHIFT				24
-#define OMAP4430_RAMP_DOWN_PRESCAL_MASK					(0x3 << 24)
-
-/*
- * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
- * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
- * PRM_VOLTSETUP_MPU_RET_SLEEP
- */
 #define OMAP4430_RAMP_UP_COUNT_SHIFT					0
-#define OMAP4430_RAMP_UP_COUNT_MASK					(0x3f << 0)
-
-/*
- * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
- * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
- * PRM_VOLTSETUP_MPU_RET_SLEEP
- */
 #define OMAP4430_RAMP_UP_PRESCAL_SHIFT					8
-#define OMAP4430_RAMP_UP_PRESCAL_MASK					(0x3 << 8)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAV_VDD_CORE_L_SHIFT					1
-#define OMAP4430_RAV_VDD_CORE_L_MASK					(1 << 1)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAV_VDD_IVA_L_SHIFT					9
-#define OMAP4430_RAV_VDD_IVA_L_MASK					(1 << 9)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAV_VDD_MPU_L_SHIFT					18
-#define OMAP4430_RAV_VDD_MPU_L_MASK					(1 << 18)
-
-/* Used by PRM_VC_VAL_BYPASS */
 #define OMAP4430_REGADDR_SHIFT						8
-#define OMAP4430_REGADDR_MASK						(0xff << 8)
-
-/*
- * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
- * PRM_VC_VAL_CMD_VDD_MPU_L
- */
 #define OMAP4430_RET_SHIFT						8
-#define OMAP4430_RET_MASK						(0xff << 8)
-
-/* Used by PM_L4PER_PWRSTCTRL */
-#define OMAP4430_RETAINED_BANK_ONSTATE_SHIFT				16
-#define OMAP4430_RETAINED_BANK_ONSTATE_MASK				(0x3 << 16)
-
-/* Used by PM_L4PER_PWRSTCTRL */
-#define OMAP4430_RETAINED_BANK_RETSTATE_SHIFT				8
-#define OMAP4430_RETAINED_BANK_RETSTATE_MASK				(1 << 8)
-
-/* Used by PM_L4PER_PWRSTST */
-#define OMAP4430_RETAINED_BANK_STATEST_SHIFT				4
-#define OMAP4430_RETAINED_BANK_STATEST_MASK				(0x3 << 4)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL,
- * PRM_LDO_SRAM_MPU_CTRL
- */
-#define OMAP4430_RETMODE_ENABLE_SHIFT					0
-#define OMAP4430_RETMODE_ENABLE_MASK					(1 << 0)
-
-/* Used by RM_DUCATI_RSTCTRL, RM_IVAHD_RSTCTRL, RM_TESLA_RSTCTRL */
-#define OMAP4430_RST1_SHIFT						0
-#define OMAP4430_RST1_MASK						(1 << 0)
-
-/* Used by RM_DUCATI_RSTST, RM_IVAHD_RSTST, RM_TESLA_RSTST */
-#define OMAP4430_RST1ST_SHIFT						0
-#define OMAP4430_RST1ST_MASK						(1 << 0)
-
-/* Used by RM_DUCATI_RSTCTRL, RM_IVAHD_RSTCTRL, RM_TESLA_RSTCTRL */
-#define OMAP4430_RST2_SHIFT						1
-#define OMAP4430_RST2_MASK						(1 << 1)
-
-/* Used by RM_DUCATI_RSTST, RM_IVAHD_RSTST, RM_TESLA_RSTST */
-#define OMAP4430_RST2ST_SHIFT						1
-#define OMAP4430_RST2ST_MASK						(1 << 1)
-
-/* Used by RM_DUCATI_RSTCTRL, RM_IVAHD_RSTCTRL */
-#define OMAP4430_RST3_SHIFT						2
-#define OMAP4430_RST3_MASK						(1 << 2)
-
-/* Used by RM_DUCATI_RSTST, RM_IVAHD_RSTST */
-#define OMAP4430_RST3ST_SHIFT						2
-#define OMAP4430_RST3ST_MASK						(1 << 2)
-
-/* Used by PRM_RSTTIME */
-#define OMAP4430_RSTTIME1_SHIFT						0
-#define OMAP4430_RSTTIME1_MASK						(0x3ff << 0)
-
-/* Used by PRM_RSTTIME */
-#define OMAP4430_RSTTIME2_SHIFT						10
-#define OMAP4430_RSTTIME2_MASK						(0x1f << 10)
-
-/* Used by PRM_RSTCTRL */
-#define OMAP4430_RST_GLOBAL_COLD_SW_SHIFT				1
-#define OMAP4430_RST_GLOBAL_COLD_SW_MASK				(1 << 1)
-
-/* Used by PRM_RSTCTRL */
-#define OMAP4430_RST_GLOBAL_WARM_SW_SHIFT				0
 #define OMAP4430_RST_GLOBAL_WARM_SW_MASK				(1 << 0)
-
-/* Used by REVISION_PRM */
-#define OMAP4430_R_RTL_SHIFT						11
-#define OMAP4430_R_RTL_MASK						(0x1f << 11)
-
-/* Used by PRM_VC_CFG_CHANNEL */
 #define OMAP4430_SA_VDD_CORE_L_SHIFT					0
-#define OMAP4430_SA_VDD_CORE_L_MASK					(1 << 0)
-
-/* Renamed from SA_VDD_CORE_L Used by PRM_VC_SMPS_SA */
-#define OMAP4430_SA_VDD_CORE_L_0_6_SHIFT				0
 #define OMAP4430_SA_VDD_CORE_L_0_6_MASK					(0x7f << 0)
-
-/* Used by PRM_VC_CFG_CHANNEL */
 #define OMAP4430_SA_VDD_IVA_L_SHIFT					8
-#define OMAP4430_SA_VDD_IVA_L_MASK					(1 << 8)
-
-/* Renamed from SA_VDD_IVA_L Used by PRM_VC_SMPS_SA */
-#define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT			8
 #define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK			(0x7f << 8)
-
-/* Used by PRM_VC_CFG_CHANNEL */
 #define OMAP4430_SA_VDD_MPU_L_SHIFT					16
-#define OMAP4430_SA_VDD_MPU_L_MASK					(1 << 16)
-
-/* Renamed from SA_VDD_MPU_L Used by PRM_VC_SMPS_SA */
-#define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT			16
 #define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK			(0x7f << 16)
-
-/* Used by REVISION_PRM */
-#define OMAP4430_SCHEME_SHIFT						30
-#define OMAP4430_SCHEME_MASK						(0x3 << 30)
-
-/* Used by PRM_VC_CFG_I2C_CLK */
 #define OMAP4430_SCLH_SHIFT						0
-#define OMAP4430_SCLH_MASK						(0xff << 0)
-
-/* Used by PRM_VC_CFG_I2C_CLK */
 #define OMAP4430_SCLL_SHIFT						8
-#define OMAP4430_SCLL_MASK						(0xff << 8)
-
-/* Used by PRM_RSTST */
 #define OMAP4430_SECURE_WDT_RST_SHIFT					4
-#define OMAP4430_SECURE_WDT_RST_MASK					(1 << 4)
-
-/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_SL2_MEM_ONSTATE_SHIFT					18
-#define OMAP4430_SL2_MEM_ONSTATE_MASK					(0x3 << 18)
-
-/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_SL2_MEM_RETSTATE_SHIFT					9
-#define OMAP4430_SL2_MEM_RETSTATE_MASK					(1 << 9)
-
-/* Used by PM_IVAHD_PWRSTST */
-#define OMAP4430_SL2_MEM_STATEST_SHIFT					6
-#define OMAP4430_SL2_MEM_STATEST_MASK					(0x3 << 6)
-
-/* Used by PRM_VC_VAL_BYPASS */
 #define OMAP4430_SLAVEADDR_SHIFT					0
-#define OMAP4430_SLAVEADDR_MASK						(0x7f << 0)
-
-/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
-#define OMAP4430_SLEEP_RBB_SEL_SHIFT					3
-#define OMAP4430_SLEEP_RBB_SEL_MASK					(1 << 3)
-
-/* Used by PRM_SRAM_COUNT */
-#define OMAP4430_SLPCNT_VALUE_SHIFT					16
-#define OMAP4430_SLPCNT_VALUE_MASK					(0xff << 16)
-
-/* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_IVA_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */
 #define OMAP4430_SMPSWAITTIMEMAX_SHIFT					8
-#define OMAP4430_SMPSWAITTIMEMAX_MASK					(0xffff << 8)
-
-/* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_IVA_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */
 #define OMAP4430_SMPSWAITTIMEMIN_SHIFT					8
-#define OMAP4430_SMPSWAITTIMEMIN_MASK					(0xffff << 8)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_SMPS_RA_ERR_CORE_SHIFT					1
-#define OMAP4430_SMPS_RA_ERR_CORE_MASK					(1 << 1)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_SMPS_RA_ERR_IVA_SHIFT					9
-#define OMAP4430_SMPS_RA_ERR_IVA_MASK					(1 << 9)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_SMPS_RA_ERR_MPU_SHIFT					17
-#define OMAP4430_SMPS_RA_ERR_MPU_MASK					(1 << 17)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_SMPS_SA_ERR_CORE_SHIFT					0
-#define OMAP4430_SMPS_SA_ERR_CORE_MASK					(1 << 0)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_SMPS_SA_ERR_IVA_SHIFT					8
-#define OMAP4430_SMPS_SA_ERR_IVA_MASK					(1 << 8)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_SMPS_SA_ERR_MPU_SHIFT					16
-#define OMAP4430_SMPS_SA_ERR_MPU_MASK					(1 << 16)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_SMPS_TIMEOUT_ERR_CORE_SHIFT				2
-#define OMAP4430_SMPS_TIMEOUT_ERR_CORE_MASK				(1 << 2)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_SMPS_TIMEOUT_ERR_IVA_SHIFT				10
-#define OMAP4430_SMPS_TIMEOUT_ERR_IVA_MASK				(1 << 10)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_SMPS_TIMEOUT_ERR_MPU_SHIFT				18
-#define OMAP4430_SMPS_TIMEOUT_ERR_MPU_MASK				(1 << 18)
-
-/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
-#define OMAP4430_SR2EN_SHIFT						0
-#define OMAP4430_SR2EN_MASK						(1 << 0)
-
-/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
-#define OMAP4430_SR2_IN_TRANSITION_SHIFT				6
-#define OMAP4430_SR2_IN_TRANSITION_MASK					(1 << 6)
-
-/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
-#define OMAP4430_SR2_STATUS_SHIFT					3
-#define OMAP4430_SR2_STATUS_MASK					(0x3 << 3)
-
-/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
-#define OMAP4430_SR2_WTCNT_VALUE_SHIFT					8
-#define OMAP4430_SR2_WTCNT_VALUE_MASK					(0xff << 8)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL,
- * PRM_LDO_SRAM_MPU_CTRL
- */
-#define OMAP4430_SRAMLDO_STATUS_SHIFT					8
-#define OMAP4430_SRAMLDO_STATUS_MASK					(1 << 8)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL,
- * PRM_LDO_SRAM_MPU_CTRL
- */
-#define OMAP4430_SRAM_IN_TRANSITION_SHIFT				9
-#define OMAP4430_SRAM_IN_TRANSITION_MASK				(1 << 9)
-
-/* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP4430_SRMODEEN_SHIFT						4
-#define OMAP4430_SRMODEEN_MASK						(1 << 4)
-
-/* Used by PRM_VOLTSETUP_WARMRESET */
-#define OMAP4430_STABLE_COUNT_SHIFT					0
-#define OMAP4430_STABLE_COUNT_MASK					(0x3f << 0)
-
-/* Used by PRM_VOLTSETUP_WARMRESET */
-#define OMAP4430_STABLE_PRESCAL_SHIFT					8
-#define OMAP4430_STABLE_PRESCAL_MASK					(0x3 << 8)
-
-/* Used by PRM_LDO_BANDGAP_SETUP */
-#define OMAP4430_STARTUP_COUNT_SHIFT					0
-#define OMAP4430_STARTUP_COUNT_MASK					(0xff << 0)
-
-/* Renamed from STARTUP_COUNT Used by PRM_SRAM_COUNT */
-#define OMAP4430_STARTUP_COUNT_24_31_SHIFT				24
-#define OMAP4430_STARTUP_COUNT_24_31_MASK				(0xff << 24)
-
-/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_TCM1_MEM_ONSTATE_SHIFT					20
-#define OMAP4430_TCM1_MEM_ONSTATE_MASK					(0x3 << 20)
-
-/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_TCM1_MEM_RETSTATE_SHIFT				10
-#define OMAP4430_TCM1_MEM_RETSTATE_MASK					(1 << 10)
-
-/* Used by PM_IVAHD_PWRSTST */
-#define OMAP4430_TCM1_MEM_STATEST_SHIFT					8
-#define OMAP4430_TCM1_MEM_STATEST_MASK					(0x3 << 8)
-
-/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_TCM2_MEM_ONSTATE_SHIFT					22
-#define OMAP4430_TCM2_MEM_ONSTATE_MASK					(0x3 << 22)
-
-/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_TCM2_MEM_RETSTATE_SHIFT				11
-#define OMAP4430_TCM2_MEM_RETSTATE_MASK					(1 << 11)
-
-/* Used by PM_IVAHD_PWRSTST */
-#define OMAP4430_TCM2_MEM_STATEST_SHIFT					10
-#define OMAP4430_TCM2_MEM_STATEST_MASK					(0x3 << 10)
-
-/* Used by RM_TESLA_RSTST */
-#define OMAP4430_TESLASS_EMU_RSTST_SHIFT				2
-#define OMAP4430_TESLASS_EMU_RSTST_MASK					(1 << 2)
-
-/* Used by RM_TESLA_RSTST */
-#define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_SHIFT				3
-#define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_MASK				(1 << 3)
-
-/* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_EDMA_ONSTATE_SHIFT				20
-#define OMAP4430_TESLA_EDMA_ONSTATE_MASK				(0x3 << 20)
-
-/* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_EDMA_RETSTATE_SHIFT				10
-#define OMAP4430_TESLA_EDMA_RETSTATE_MASK				(1 << 10)
-
-/* Used by PM_TESLA_PWRSTST */
-#define OMAP4430_TESLA_EDMA_STATEST_SHIFT				8
-#define OMAP4430_TESLA_EDMA_STATEST_MASK				(0x3 << 8)
-
-/* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_L1_ONSTATE_SHIFT					16
-#define OMAP4430_TESLA_L1_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_L1_RETSTATE_SHIFT				8
-#define OMAP4430_TESLA_L1_RETSTATE_MASK					(1 << 8)
-
-/* Used by PM_TESLA_PWRSTST */
-#define OMAP4430_TESLA_L1_STATEST_SHIFT					4
-#define OMAP4430_TESLA_L1_STATEST_MASK					(0x3 << 4)
-
-/* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_L2_ONSTATE_SHIFT					18
-#define OMAP4430_TESLA_L2_ONSTATE_MASK					(0x3 << 18)
-
-/* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_L2_RETSTATE_SHIFT				9
-#define OMAP4430_TESLA_L2_RETSTATE_MASK					(1 << 9)
-
-/* Used by PM_TESLA_PWRSTST */
-#define OMAP4430_TESLA_L2_STATEST_SHIFT					6
-#define OMAP4430_TESLA_L2_STATEST_MASK					(0x3 << 6)
-
-/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */
 #define OMAP4430_TIMEOUT_SHIFT						0
-#define OMAP4430_TIMEOUT_MASK						(0xffff << 0)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_TIMEOUTEN_SHIFT					3
 #define OMAP4430_TIMEOUTEN_MASK						(1 << 3)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_TRANSITION_EN_SHIFT					8
-#define OMAP4430_TRANSITION_EN_MASK					(1 << 8)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_TRANSITION_ST_SHIFT					8
-#define OMAP4430_TRANSITION_ST_MASK					(1 << 8)
-
-/* Used by PRM_VC_VAL_BYPASS */
-#define OMAP4430_VALID_SHIFT						24
 #define OMAP4430_VALID_MASK						(1 << 24)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_BYPASSACK_EN_SHIFT					14
-#define OMAP4430_VC_BYPASSACK_EN_MASK					(1 << 14)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_BYPASSACK_ST_SHIFT					14
-#define OMAP4430_VC_BYPASSACK_ST_MASK					(1 << 14)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_CORE_VPACK_EN_SHIFT					22
-#define OMAP4430_VC_CORE_VPACK_EN_MASK					(1 << 22)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_CORE_VPACK_ST_SHIFT					22
-#define OMAP4430_VC_CORE_VPACK_ST_MASK					(1 << 22)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_IVA_VPACK_EN_SHIFT					30
-#define OMAP4430_VC_IVA_VPACK_EN_MASK					(1 << 30)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_IVA_VPACK_ST_SHIFT					30
-#define OMAP4430_VC_IVA_VPACK_ST_MASK					(1 << 30)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VC_MPU_VPACK_EN_SHIFT					6
-#define OMAP4430_VC_MPU_VPACK_EN_MASK					(1 << 6)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VC_MPU_VPACK_ST_SHIFT					6
-#define OMAP4430_VC_MPU_VPACK_ST_MASK					(1 << 6)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_RAERR_EN_SHIFT					12
-#define OMAP4430_VC_RAERR_EN_MASK					(1 << 12)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_RAERR_ST_SHIFT					12
-#define OMAP4430_VC_RAERR_ST_MASK					(1 << 12)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_SAERR_EN_SHIFT					11
-#define OMAP4430_VC_SAERR_EN_MASK					(1 << 11)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_SAERR_ST_SHIFT					11
-#define OMAP4430_VC_SAERR_ST_MASK					(1 << 11)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_TOERR_EN_SHIFT					13
-#define OMAP4430_VC_TOERR_EN_MASK					(1 << 13)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_TOERR_ST_SHIFT					13
-#define OMAP4430_VC_TOERR_ST_MASK					(1 << 13)
-
-/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */
 #define OMAP4430_VDDMAX_SHIFT						24
-#define OMAP4430_VDDMAX_MASK						(0xff << 24)
-
-/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */
 #define OMAP4430_VDDMIN_SHIFT						16
-#define OMAP4430_VDDMIN_MASK						(0xff << 16)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP4430_VDD_CORE_I2C_DISABLE_SHIFT				12
-#define OMAP4430_VDD_CORE_I2C_DISABLE_MASK				(1 << 12)
-
-/* Used by PRM_RSTST */
 #define OMAP4430_VDD_CORE_VOLT_MGR_RST_SHIFT				8
-#define OMAP4430_VDD_CORE_VOLT_MGR_RST_MASK				(1 << 8)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP4430_VDD_IVA_I2C_DISABLE_SHIFT				14
-#define OMAP4430_VDD_IVA_I2C_DISABLE_MASK				(1 << 14)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP4430_VDD_IVA_PRESENCE_SHIFT					9
-#define OMAP4430_VDD_IVA_PRESENCE_MASK					(1 << 9)
-
-/* Used by PRM_RSTST */
 #define OMAP4430_VDD_IVA_VOLT_MGR_RST_SHIFT				7
-#define OMAP4430_VDD_IVA_VOLT_MGR_RST_MASK				(1 << 7)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP4430_VDD_MPU_I2C_DISABLE_SHIFT				13
-#define OMAP4430_VDD_MPU_I2C_DISABLE_MASK				(1 << 13)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP4430_VDD_MPU_PRESENCE_SHIFT					8
-#define OMAP4430_VDD_MPU_PRESENCE_MASK					(1 << 8)
-
-/* Used by PRM_RSTST */
 #define OMAP4430_VDD_MPU_VOLT_MGR_RST_SHIFT				6
-#define OMAP4430_VDD_MPU_VOLT_MGR_RST_MASK				(1 << 6)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_VFSM_RA_ERR_CORE_SHIFT					4
-#define OMAP4430_VFSM_RA_ERR_CORE_MASK					(1 << 4)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_VFSM_RA_ERR_IVA_SHIFT					12
-#define OMAP4430_VFSM_RA_ERR_IVA_MASK					(1 << 12)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_VFSM_RA_ERR_MPU_SHIFT					20
-#define OMAP4430_VFSM_RA_ERR_MPU_MASK					(1 << 20)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_VFSM_SA_ERR_CORE_SHIFT					3
-#define OMAP4430_VFSM_SA_ERR_CORE_MASK					(1 << 3)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_VFSM_SA_ERR_IVA_SHIFT					11
-#define OMAP4430_VFSM_SA_ERR_IVA_MASK					(1 << 11)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_VFSM_SA_ERR_MPU_SHIFT					19
-#define OMAP4430_VFSM_SA_ERR_MPU_MASK					(1 << 19)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_VFSM_TIMEOUT_ERR_CORE_SHIFT				5
-#define OMAP4430_VFSM_TIMEOUT_ERR_CORE_MASK				(1 << 5)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_VFSM_TIMEOUT_ERR_IVA_SHIFT				13
-#define OMAP4430_VFSM_TIMEOUT_ERR_IVA_MASK				(1 << 13)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_VFSM_TIMEOUT_ERR_MPU_SHIFT				21
-#define OMAP4430_VFSM_TIMEOUT_ERR_MPU_MASK				(1 << 21)
-
-/* Used by PRM_VC_VAL_SMPS_RA_VOL */
-#define OMAP4430_VOLRA_VDD_CORE_L_SHIFT					0
 #define OMAP4430_VOLRA_VDD_CORE_L_MASK					(0xff << 0)
-
-/* Used by PRM_VC_VAL_SMPS_RA_VOL */
-#define OMAP4430_VOLRA_VDD_IVA_L_SHIFT					8
 #define OMAP4430_VOLRA_VDD_IVA_L_MASK					(0xff << 8)
-
-/* Used by PRM_VC_VAL_SMPS_RA_VOL */
-#define OMAP4430_VOLRA_VDD_MPU_L_SHIFT					16
 #define OMAP4430_VOLRA_VDD_MPU_L_MASK					(0xff << 16)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_VPENABLE_SHIFT						0
 #define OMAP4430_VPENABLE_MASK						(1 << 0)
-
-/* Used by PRM_VP_CORE_STATUS, PRM_VP_IVA_STATUS, PRM_VP_MPU_STATUS */
-#define OMAP4430_VPINIDLE_SHIFT						0
-#define OMAP4430_VPINIDLE_MASK						(1 << 0)
-
-/* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_IVA_VOLTAGE, PRM_VP_MPU_VOLTAGE */
-#define OMAP4430_VPVOLTAGE_SHIFT					0
 #define OMAP4430_VPVOLTAGE_MASK						(0xff << 0)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_EQVALUE_EN_SHIFT				20
-#define OMAP4430_VP_CORE_EQVALUE_EN_MASK				(1 << 20)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_EQVALUE_ST_SHIFT				20
-#define OMAP4430_VP_CORE_EQVALUE_ST_MASK				(1 << 20)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_MAXVDD_EN_SHIFT				18
-#define OMAP4430_VP_CORE_MAXVDD_EN_MASK					(1 << 18)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_MAXVDD_ST_SHIFT				18
-#define OMAP4430_VP_CORE_MAXVDD_ST_MASK					(1 << 18)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_MINVDD_EN_SHIFT				17
-#define OMAP4430_VP_CORE_MINVDD_EN_MASK					(1 << 17)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_MINVDD_ST_SHIFT				17
-#define OMAP4430_VP_CORE_MINVDD_ST_MASK					(1 << 17)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_NOSMPSACK_EN_SHIFT				19
-#define OMAP4430_VP_CORE_NOSMPSACK_EN_MASK				(1 << 19)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_NOSMPSACK_ST_SHIFT				19
-#define OMAP4430_VP_CORE_NOSMPSACK_ST_MASK				(1 << 19)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_SHIFT				16
-#define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_MASK				(1 << 16)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_SHIFT				16
-#define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_MASK				(1 << 16)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_TRANXDONE_EN_SHIFT				21
-#define OMAP4430_VP_CORE_TRANXDONE_EN_MASK				(1 << 21)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_TRANXDONE_ST_SHIFT				21
 #define OMAP4430_VP_CORE_TRANXDONE_ST_MASK				(1 << 21)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_EQVALUE_EN_SHIFT				28
-#define OMAP4430_VP_IVA_EQVALUE_EN_MASK					(1 << 28)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_EQVALUE_ST_SHIFT				28
-#define OMAP4430_VP_IVA_EQVALUE_ST_MASK					(1 << 28)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_MAXVDD_EN_SHIFT					26
-#define OMAP4430_VP_IVA_MAXVDD_EN_MASK					(1 << 26)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_MAXVDD_ST_SHIFT					26
-#define OMAP4430_VP_IVA_MAXVDD_ST_MASK					(1 << 26)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_MINVDD_EN_SHIFT					25
-#define OMAP4430_VP_IVA_MINVDD_EN_MASK					(1 << 25)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_MINVDD_ST_SHIFT					25
-#define OMAP4430_VP_IVA_MINVDD_ST_MASK					(1 << 25)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_NOSMPSACK_EN_SHIFT				27
-#define OMAP4430_VP_IVA_NOSMPSACK_EN_MASK				(1 << 27)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_NOSMPSACK_ST_SHIFT				27
-#define OMAP4430_VP_IVA_NOSMPSACK_ST_MASK				(1 << 27)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_SHIFT				24
-#define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_MASK				(1 << 24)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_SHIFT				24
-#define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_MASK				(1 << 24)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_TRANXDONE_EN_SHIFT				29
-#define OMAP4430_VP_IVA_TRANXDONE_EN_MASK				(1 << 29)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_TRANXDONE_ST_SHIFT				29
 #define OMAP4430_VP_IVA_TRANXDONE_ST_MASK				(1 << 29)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_EQVALUE_EN_SHIFT				4
-#define OMAP4430_VP_MPU_EQVALUE_EN_MASK					(1 << 4)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_EQVALUE_ST_SHIFT				4
-#define OMAP4430_VP_MPU_EQVALUE_ST_MASK					(1 << 4)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_MAXVDD_EN_SHIFT					2
-#define OMAP4430_VP_MPU_MAXVDD_EN_MASK					(1 << 2)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_MAXVDD_ST_SHIFT					2
-#define OMAP4430_VP_MPU_MAXVDD_ST_MASK					(1 << 2)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_MINVDD_EN_SHIFT					1
-#define OMAP4430_VP_MPU_MINVDD_EN_MASK					(1 << 1)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_MINVDD_ST_SHIFT					1
-#define OMAP4430_VP_MPU_MINVDD_ST_MASK					(1 << 1)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_NOSMPSACK_EN_SHIFT				3
-#define OMAP4430_VP_MPU_NOSMPSACK_EN_MASK				(1 << 3)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_NOSMPSACK_ST_SHIFT				3
-#define OMAP4430_VP_MPU_NOSMPSACK_ST_MASK				(1 << 3)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_SHIFT				0
-#define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_MASK				(1 << 0)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_SHIFT				0
-#define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_MASK				(1 << 0)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_TRANXDONE_EN_SHIFT				5
-#define OMAP4430_VP_MPU_TRANXDONE_EN_MASK				(1 << 5)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_TRANXDONE_ST_SHIFT				5
 #define OMAP4430_VP_MPU_TRANXDONE_ST_MASK				(1 << 5)
-
-/* Used by PRM_SRAM_COUNT */
-#define OMAP4430_VSETUPCNT_VALUE_SHIFT					8
-#define OMAP4430_VSETUPCNT_VALUE_MASK					(0xff << 8)
-
-/* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_IVA_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */
 #define OMAP4430_VSTEPMAX_SHIFT						0
-#define OMAP4430_VSTEPMAX_MASK						(0xff << 0)
-
-/* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_IVA_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */
 #define OMAP4430_VSTEPMIN_SHIFT						0
-#define OMAP4430_VSTEPMIN_MASK						(0xff << 0)
-
-/* Used by PRM_MODEM_IF_CTRL */
-#define OMAP4430_WAKE_MODEM_SHIFT					0
-#define OMAP4430_WAKE_MODEM_MASK					(1 << 0)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DISPC_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_DISPC_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DISPC_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DISPC_MPU_MASK					(1 << 0)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DISPC_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_DISPC_SDMA_MASK				(1 << 3)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DISPC_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_DISPC_TESLA_MASK				(1 << 2)
-
-/* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_MASK				(1 << 6)
-
-/* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L4PER_DMTIMER10_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER10_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMTIMER10_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_DMTIMER11_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_DMTIMER11_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER11_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMTIMER11_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_DMTIMER2_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER2_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMTIMER2_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_DMTIMER3_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_DMTIMER3_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER3_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMTIMER3_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_DMTIMER4_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_DMTIMER4_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER4_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMTIMER4_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_DMTIMER9_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_DMTIMER9_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER9_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMTIMER9_MPU_MASK				(1 << 0)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI1_DUCATI_SHIFT				5
-#define OMAP4430_WKUPDEP_DSI1_DUCATI_MASK				(1 << 5)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI1_MPU_SHIFT					4
-#define OMAP4430_WKUPDEP_DSI1_MPU_MASK					(1 << 4)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI1_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_DSI1_SDMA_MASK					(1 << 7)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI1_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_DSI1_TESLA_MASK				(1 << 6)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI2_DUCATI_SHIFT				9
-#define OMAP4430_WKUPDEP_DSI2_DUCATI_MASK				(1 << 9)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI2_MPU_SHIFT					8
-#define OMAP4430_WKUPDEP_DSI2_MPU_MASK					(1 << 8)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI2_SDMA_SHIFT				11
-#define OMAP4430_WKUPDEP_DSI2_SDMA_MASK					(1 << 11)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI2_TESLA_SHIFT				10
-#define OMAP4430_WKUPDEP_DSI2_TESLA_MASK				(1 << 10)
-
-/* Used by PM_WKUP_GPIO1_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_SHIFT			1
-#define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_WKUP_GPIO1_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_MASK				(1 << 0)
-
-/* Used by PM_WKUP_GPIO1_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_MASK				(1 << 6)
-
-/* Used by PM_L4PER_GPIO2_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_SHIFT			1
-#define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_GPIO2_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_GPIO2_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_MASK				(1 << 6)
-
-/* Used by PM_L4PER_GPIO3_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_GPIO3_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_MASK				(1 << 6)
-
-/* Used by PM_L4PER_GPIO4_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_GPIO4_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_MASK				(1 << 6)
-
-/* Used by PM_L4PER_GPIO5_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_GPIO5_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_MASK				(1 << 6)
-
-/* Used by PM_L4PER_GPIO6_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_GPIO6_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_MASK				(1 << 6)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_HDMIDMA_SDMA_SHIFT				19
-#define OMAP4430_WKUPDEP_HDMIDMA_SDMA_MASK				(1 << 19)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_SHIFT				13
-#define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_MASK				(1 << 13)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_HDMIIRQ_MPU_SHIFT				12
-#define OMAP4430_WKUPDEP_HDMIIRQ_MPU_MASK				(1 << 12)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_SHIFT				14
-#define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_MASK				(1 << 14)
-
-/* Used by PM_L4PER_HECC1_WKDEP */
-#define OMAP4430_WKUPDEP_HECC1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_HECC1_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_HECC2_WKDEP */
-#define OMAP4430_WKUPDEP_HECC2_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_HECC2_MPU_MASK					(1 << 0)
-
-/* Used by PM_L3INIT_HSI_WKDEP */
-#define OMAP4430_WKUPDEP_HSI_DSP_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_HSI_DSP_TESLA_MASK				(1 << 6)
-
-/* Used by PM_L3INIT_HSI_WKDEP */
-#define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L3INIT_HSI_WKDEP */
-#define OMAP4430_WKUPDEP_HSI_MCU_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_HSI_MCU_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_I2C1_WKDEP */
-#define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_L4PER_I2C1_WKDEP */
-#define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_I2C1_WKDEP */
-#define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_I2C2_WKDEP */
-#define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_L4PER_I2C2_WKDEP */
-#define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_I2C2_WKDEP */
-#define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_I2C3_WKDEP */
-#define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_L4PER_I2C3_WKDEP */
-#define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_I2C3_WKDEP */
-#define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_I2C4_WKDEP */
-#define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_L4PER_I2C4_WKDEP */
-#define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_I2C4_WKDEP */
-#define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_I2C5_WKDEP */
-#define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_L4PER_I2C5_WKDEP */
-#define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_WKUP_KEYBOARD_WKDEP */
-#define OMAP4430_WKUPDEP_KEYBOARD_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_KEYBOARD_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_MASK				(1 << 6)
-
-/* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L4PER_MCASP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_L4PER_MCASP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_MASK				(1 << 6)
-
-/* Used by PM_L4PER_MCASP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MCASP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L4PER_MCASP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_L4PER_MCASP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_MASK				(1 << 6)
-
-/* Used by PM_L4PER_MCASP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MCASP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_MASK				(1 << 2)
-
-/* Used by PM_ABE_MCBSP1_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCBSP1_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_MCBSP1_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP1_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCBSP1_SDMA_MASK				(1 << 3)
-
-/* Used by PM_ABE_MCBSP1_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP1_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCBSP1_TESLA_MASK				(1 << 2)
-
-/* Used by PM_ABE_MCBSP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP2_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCBSP2_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_MCBSP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP2_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCBSP2_SDMA_MASK				(1 << 3)
-
-/* Used by PM_ABE_MCBSP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP2_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCBSP2_TESLA_MASK				(1 << 2)
-
-/* Used by PM_ABE_MCBSP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP3_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCBSP3_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_MCBSP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP3_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCBSP3_SDMA_MASK				(1 << 3)
-
-/* Used by PM_ABE_MCBSP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP3_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCBSP3_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L4PER_MCBSP4_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP4_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCBSP4_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MCBSP4_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP4_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCBSP4_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L4PER_MCBSP4_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP4_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCBSP4_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI1_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MCSPI1_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCSPI1_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI1_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCSPI1_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI1_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCSPI1_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L4PER_MCSPI2_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI2_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MCSPI2_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_MCSPI2_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI2_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCSPI2_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MCSPI2_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI2_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCSPI2_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L4PER_MCSPI3_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI3_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCSPI3_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MCSPI3_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI3_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCSPI3_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L4PER_MCSPI4_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI4_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCSPI4_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MCSPI4_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI4_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCSPI4_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP4430_WKUPDEP_MMC1_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MMC1_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP4430_WKUPDEP_MMC1_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_MMC1_MPU_MASK					(1 << 0)
-
-/* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP4430_WKUPDEP_MMC1_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MMC1_SDMA_MASK					(1 << 3)
-
-/* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP4430_WKUPDEP_MMC1_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MMC1_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP4430_WKUPDEP_MMC2_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MMC2_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP4430_WKUPDEP_MMC2_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_MMC2_MPU_MASK					(1 << 0)
-
-/* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP4430_WKUPDEP_MMC2_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MMC2_SDMA_MASK					(1 << 3)
-
-/* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP4430_WKUPDEP_MMC2_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MMC2_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L3INIT_MMC6_WKDEP */
-#define OMAP4430_WKUPDEP_MMC6_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MMC6_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L3INIT_MMC6_WKDEP */
-#define OMAP4430_WKUPDEP_MMC6_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_MMC6_MPU_MASK					(1 << 0)
-
-/* Used by PM_L3INIT_MMC6_WKDEP */
-#define OMAP4430_WKUPDEP_MMC6_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MMC6_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L4PER_MMCSD3_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD3_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MMCSD3_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_MMCSD3_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD3_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MMCSD3_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MMCSD3_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD3_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MMCSD3_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L4PER_MMCSD4_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD4_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MMCSD4_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_MMCSD4_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD4_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MMCSD4_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MMCSD4_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD4_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MMCSD4_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L4PER_MMCSD5_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD5_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MMCSD5_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_MMCSD5_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD5_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MMCSD5_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MMCSD5_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD5_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MMCSD5_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L3INIT_PCIESS_WKDEP */
-#define OMAP4430_WKUPDEP_PCIESS_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_PCIESS_MPU_MASK				(1 << 0)
-
-/* Used by PM_L3INIT_PCIESS_WKDEP */
-#define OMAP4430_WKUPDEP_PCIESS_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_PCIESS_TESLA_MASK				(1 << 2)
-
-/* Used by PM_ABE_PDM_WKDEP */
-#define OMAP4430_WKUPDEP_PDM_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_PDM_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_ABE_PDM_WKDEP */
-#define OMAP4430_WKUPDEP_PDM_DMA_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_PDM_DMA_TESLA_MASK				(1 << 6)
-
-/* Used by PM_ABE_PDM_WKDEP */
-#define OMAP4430_WKUPDEP_PDM_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_PDM_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_PDM_WKDEP */
-#define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_MASK				(1 << 2)
-
-/* Used by PM_WKUP_RTC_WKDEP */
-#define OMAP4430_WKUPDEP_RTC_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_RTC_MPU_MASK					(1 << 0)
-
-/* Used by PM_L3INIT_SATA_WKDEP */
-#define OMAP4430_WKUPDEP_SATA_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_SATA_MPU_MASK					(1 << 0)
-
-/* Used by PM_L3INIT_SATA_WKDEP */
-#define OMAP4430_WKUPDEP_SATA_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_SATA_TESLA_MASK				(1 << 2)
-
-/* Used by PM_ABE_SLIMBUS_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_SHIFT			7
-#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_ABE_SLIMBUS_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_SHIFT			6
-#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_MASK			(1 << 6)
-
-/* Used by PM_ABE_SLIMBUS_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_SLIMBUS_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_SHIFT			2
-#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_MASK			(1 << 2)
-
-/* Used by PM_L4PER_SLIMBUS2_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_SHIFT			7
-#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_L4PER_SLIMBUS2_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_SHIFT			6
-#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_MASK			(1 << 6)
-
-/* Used by PM_L4PER_SLIMBUS2_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_SLIMBUS2_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_SHIFT			2
-#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_MASK			(1 << 2)
-
-/* Used by PM_ALWON_SR_CORE_WKDEP */
-#define OMAP4430_WKUPDEP_SR_CORE_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_SR_CORE_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_ALWON_SR_CORE_WKDEP */
-#define OMAP4430_WKUPDEP_SR_CORE_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_SR_CORE_MPU_MASK				(1 << 0)
-
-/* Used by PM_ALWON_SR_IVA_WKDEP */
-#define OMAP4430_WKUPDEP_SR_IVA_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_SR_IVA_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_ALWON_SR_IVA_WKDEP */
-#define OMAP4430_WKUPDEP_SR_IVA_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_SR_IVA_MPU_MASK				(1 << 0)
-
-/* Used by PM_ALWON_SR_MPU_WKDEP */
-#define OMAP4430_WKUPDEP_SR_MPU_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_SR_MPU_MPU_MASK				(1 << 0)
-
-/* Used by PM_WKUP_TIMER12_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER12_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_TIMER12_MPU_MASK				(1 << 0)
-
-/* Used by PM_WKUP_TIMER1_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_TIMER1_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_TIMER5_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER5_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_TIMER5_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_TIMER5_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER5_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_TIMER5_TESLA_MASK				(1 << 2)
-
-/* Used by PM_ABE_TIMER6_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER6_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_TIMER6_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_TIMER6_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER6_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_TIMER6_TESLA_MASK				(1 << 2)
-
-/* Used by PM_ABE_TIMER7_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER7_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_TIMER7_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_TIMER7_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER7_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_TIMER7_TESLA_MASK				(1 << 2)
-
-/* Used by PM_ABE_TIMER8_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER8_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_TIMER8_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_TIMER8_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER8_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_TIMER8_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L4PER_UART1_WKDEP */
-#define OMAP4430_WKUPDEP_UART1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_UART1_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_UART1_WKDEP */
-#define OMAP4430_WKUPDEP_UART1_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_UART1_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L4PER_UART2_WKDEP */
-#define OMAP4430_WKUPDEP_UART2_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_UART2_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_UART2_WKDEP */
-#define OMAP4430_WKUPDEP_UART2_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_UART2_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP4430_WKUPDEP_UART3_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_UART3_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP4430_WKUPDEP_UART3_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_UART3_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP4430_WKUPDEP_UART3_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_UART3_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP4430_WKUPDEP_UART3_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_UART3_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L4PER_UART4_WKDEP */
-#define OMAP4430_WKUPDEP_UART4_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_UART4_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_UART4_WKDEP */
-#define OMAP4430_WKUPDEP_UART4_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_UART4_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L3INIT_UNIPRO1_WKDEP */
-#define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L3INIT_UNIPRO1_WKDEP */
-#define OMAP4430_WKUPDEP_UNIPRO1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_UNIPRO1_MPU_MASK				(1 << 0)
-
-/* Used by PM_L3INIT_USB_HOST_WKDEP */
-#define OMAP4430_WKUPDEP_USB_HOST_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_USB_HOST_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L3INIT_USB_HOST_FS_WKDEP */
-#define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_SHIFT			1
-#define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_MASK			(1 << 1)
-
-/* Used by PM_L3INIT_USB_HOST_FS_WKDEP */
-#define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_MASK				(1 << 0)
-
-/* Used by PM_L3INIT_USB_HOST_WKDEP */
-#define OMAP4430_WKUPDEP_USB_HOST_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_USB_HOST_MPU_MASK				(1 << 0)
-
-/* Used by PM_L3INIT_USB_OTG_WKDEP */
-#define OMAP4430_WKUPDEP_USB_OTG_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_USB_OTG_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L3INIT_USB_OTG_WKDEP */
-#define OMAP4430_WKUPDEP_USB_OTG_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_USB_OTG_MPU_MASK				(1 << 0)
-
-/* Used by PM_L3INIT_USB_TLL_WKDEP */
-#define OMAP4430_WKUPDEP_USB_TLL_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_USB_TLL_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L3INIT_USB_TLL_WKDEP */
-#define OMAP4430_WKUPDEP_USB_TLL_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_USB_TLL_MPU_MASK				(1 << 0)
-
-/* Used by PM_WKUP_USIM_WKDEP */
-#define OMAP4430_WKUPDEP_USIM_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_USIM_MPU_MASK					(1 << 0)
-
-/* Used by PM_WKUP_USIM_WKDEP */
-#define OMAP4430_WKUPDEP_USIM_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_USIM_SDMA_MASK					(1 << 3)
-
-/* Used by PM_WKUP_WDT2_WKDEP */
-#define OMAP4430_WKUPDEP_WDT2_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_WDT2_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_WKUP_WDT2_WKDEP */
-#define OMAP4430_WKUPDEP_WDT2_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_WDT2_MPU_MASK					(1 << 0)
-
-/* Used by PM_ABE_WDT3_WKDEP */
-#define OMAP4430_WKUPDEP_WDT3_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_WDT3_MPU_MASK					(1 << 0)
-
-/* Used by PM_L3INIT_HSI_WKDEP */
-#define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_SHIFT				8
-#define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_MASK				(1 << 8)
-
-/* Used by PM_L3INIT_XHPI_WKDEP */
-#define OMAP4430_WKUPDEP_XHPI_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_XHPI_DUCATI_MASK				(1 << 1)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP4430_WUCLK_CTRL_SHIFT					8
 #define OMAP4430_WUCLK_CTRL_MASK					(1 << 8)
-
-/* Used by PRM_IO_PMCTRL */
 #define OMAP4430_WUCLK_STATUS_SHIFT					9
 #define OMAP4430_WUCLK_STATUS_MASK					(1 << 9)
-
-/* Used by REVISION_PRM */
-#define OMAP4430_X_MAJOR_SHIFT						8
-#define OMAP4430_X_MAJOR_MASK						(0x7 << 8)
-
-/* Used by REVISION_PRM */
-#define OMAP4430_Y_MINOR_SHIFT						0
-#define OMAP4430_Y_MINOR_MASK						(0x3f << 0)
 #endif
diff --git a/arch/arm/mach-omap2/prm-regbits-54xx.h b/arch/arm/mach-omap2/prm-regbits-54xx.h
deleted file mode 100644
index be31b21..0000000
--- a/arch/arm/mach-omap2/prm-regbits-54xx.h
+++ /dev/null
@@ -1,2701 +0,0 @@
-/*
- * OMAP54xx Power Management register bits
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
- *
- * Paul Walmsley (paul@pwsan.com)
- * Rajendra Nayak (rnayak@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_54XX_H
-#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_54XX_H
-
-/* Used by PRM_SLDO_CORE_SETUP, PRM_SLDO_MM_SETUP, PRM_SLDO_MPU_SETUP */
-#define OMAP54XX_ABBOFF_ACT_SHIFT						1
-#define OMAP54XX_ABBOFF_ACT_WIDTH						0x1
-#define OMAP54XX_ABBOFF_ACT_MASK						(1 << 1)
-
-/* Used by PRM_SLDO_CORE_SETUP, PRM_SLDO_MM_SETUP, PRM_SLDO_MPU_SETUP */
-#define OMAP54XX_ABBOFF_SLEEP_SHIFT						2
-#define OMAP54XX_ABBOFF_SLEEP_WIDTH						0x1
-#define OMAP54XX_ABBOFF_SLEEP_MASK						(1 << 2)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_ABB_MM_DONE_EN_SHIFT						31
-#define OMAP54XX_ABB_MM_DONE_EN_WIDTH						0x1
-#define OMAP54XX_ABB_MM_DONE_EN_MASK						(1 << 31)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_ABB_MM_DONE_ST_SHIFT						31
-#define OMAP54XX_ABB_MM_DONE_ST_WIDTH						0x1
-#define OMAP54XX_ABB_MM_DONE_ST_MASK						(1 << 31)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP54XX_ABB_MPU_DONE_EN_SHIFT						7
-#define OMAP54XX_ABB_MPU_DONE_EN_WIDTH						0x1
-#define OMAP54XX_ABB_MPU_DONE_EN_MASK						(1 << 7)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP54XX_ABB_MPU_DONE_ST_SHIFT						7
-#define OMAP54XX_ABB_MPU_DONE_ST_WIDTH						0x1
-#define OMAP54XX_ABB_MPU_DONE_ST_MASK						(1 << 7)
-
-/* Used by PRM_ABBLDO_MM_SETUP, PRM_ABBLDO_MPU_SETUP */
-#define OMAP54XX_ACTIVE_FBB_SEL_SHIFT						2
-#define OMAP54XX_ACTIVE_FBB_SEL_WIDTH						0x1
-#define OMAP54XX_ACTIVE_FBB_SEL_MASK						(1 << 2)
-
-/* Used by PM_ABE_PWRSTCTRL */
-#define OMAP54XX_AESSMEM_ONSTATE_SHIFT						16
-#define OMAP54XX_AESSMEM_ONSTATE_WIDTH						0x2
-#define OMAP54XX_AESSMEM_ONSTATE_MASK						(0x3 << 16)
-
-/* Used by PM_ABE_PWRSTCTRL */
-#define OMAP54XX_AESSMEM_RETSTATE_SHIFT						8
-#define OMAP54XX_AESSMEM_RETSTATE_WIDTH						0x1
-#define OMAP54XX_AESSMEM_RETSTATE_MASK						(1 << 8)
-
-/* Used by PM_ABE_PWRSTST */
-#define OMAP54XX_AESSMEM_STATEST_SHIFT						4
-#define OMAP54XX_AESSMEM_STATEST_WIDTH						0x2
-#define OMAP54XX_AESSMEM_STATEST_MASK						(0x3 << 4)
-
-/* Used by PRM_SLDO_CORE_SETUP, PRM_SLDO_MM_SETUP, PRM_SLDO_MPU_SETUP */
-#define OMAP54XX_AIPOFF_SHIFT							8
-#define OMAP54XX_AIPOFF_WIDTH							0x1
-#define OMAP54XX_AIPOFF_MASK							(1 << 8)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP54XX_AUTO_CTRL_VDD_CORE_L_SHIFT					0
-#define OMAP54XX_AUTO_CTRL_VDD_CORE_L_WIDTH					0x2
-#define OMAP54XX_AUTO_CTRL_VDD_CORE_L_MASK					(0x3 << 0)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP54XX_AUTO_CTRL_VDD_MM_L_SHIFT					4
-#define OMAP54XX_AUTO_CTRL_VDD_MM_L_WIDTH					0x2
-#define OMAP54XX_AUTO_CTRL_VDD_MM_L_MASK					(0x3 << 4)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP54XX_AUTO_CTRL_VDD_MPU_L_SHIFT					2
-#define OMAP54XX_AUTO_CTRL_VDD_MPU_L_WIDTH					0x2
-#define OMAP54XX_AUTO_CTRL_VDD_MPU_L_MASK					(0x3 << 2)
-
-/* Used by PRM_VC_BYPASS_ERRST */
-#define OMAP54XX_BYPS_RA_ERR_SHIFT						1
-#define OMAP54XX_BYPS_RA_ERR_WIDTH						0x1
-#define OMAP54XX_BYPS_RA_ERR_MASK						(1 << 1)
-
-/* Used by PRM_VC_BYPASS_ERRST */
-#define OMAP54XX_BYPS_SA_ERR_SHIFT						0
-#define OMAP54XX_BYPS_SA_ERR_WIDTH						0x1
-#define OMAP54XX_BYPS_SA_ERR_MASK						(1 << 0)
-
-/* Used by PRM_VC_BYPASS_ERRST */
-#define OMAP54XX_BYPS_TIMEOUT_ERR_SHIFT						2
-#define OMAP54XX_BYPS_TIMEOUT_ERR_WIDTH						0x1
-#define OMAP54XX_BYPS_TIMEOUT_ERR_MASK						(1 << 2)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_C2C_RST_SHIFT							10
-#define OMAP54XX_C2C_RST_WIDTH							0x1
-#define OMAP54XX_C2C_RST_MASK							(1 << 10)
-
-/* Used by PM_CAM_PWRSTCTRL */
-#define OMAP54XX_CAM_MEM_ONSTATE_SHIFT						16
-#define OMAP54XX_CAM_MEM_ONSTATE_WIDTH						0x2
-#define OMAP54XX_CAM_MEM_ONSTATE_MASK						(0x3 << 16)
-
-/* Used by PM_CAM_PWRSTST */
-#define OMAP54XX_CAM_MEM_STATEST_SHIFT						4
-#define OMAP54XX_CAM_MEM_STATEST_WIDTH						0x2
-#define OMAP54XX_CAM_MEM_STATEST_MASK						(0x3 << 4)
-
-/* Used by PRM_CLKREQCTRL */
-#define OMAP54XX_CLKREQ_COND_SHIFT						0
-#define OMAP54XX_CLKREQ_COND_WIDTH						0x3
-#define OMAP54XX_CLKREQ_COND_MASK						(0x7 << 0)
-
-/* Used by PRM_VC_SMPS_CORE_CONFIG */
-#define OMAP54XX_CMDRA_VDD_CORE_L_SHIFT						16
-#define OMAP54XX_CMDRA_VDD_CORE_L_WIDTH						0x8
-#define OMAP54XX_CMDRA_VDD_CORE_L_MASK						(0xff << 16)
-
-/* Used by PRM_VC_SMPS_MM_CONFIG */
-#define OMAP54XX_CMDRA_VDD_MM_L_SHIFT						16
-#define OMAP54XX_CMDRA_VDD_MM_L_WIDTH						0x8
-#define OMAP54XX_CMDRA_VDD_MM_L_MASK						(0xff << 16)
-
-/* Used by PRM_VC_SMPS_MPU_CONFIG */
-#define OMAP54XX_CMDRA_VDD_MPU_L_SHIFT						16
-#define OMAP54XX_CMDRA_VDD_MPU_L_WIDTH						0x8
-#define OMAP54XX_CMDRA_VDD_MPU_L_MASK						(0xff << 16)
-
-/* Used by PRM_VC_SMPS_CORE_CONFIG */
-#define OMAP54XX_CMD_VDD_CORE_L_SHIFT						28
-#define OMAP54XX_CMD_VDD_CORE_L_WIDTH						0x1
-#define OMAP54XX_CMD_VDD_CORE_L_MASK						(1 << 28)
-
-/* Used by PRM_VC_SMPS_MM_CONFIG */
-#define OMAP54XX_CMD_VDD_MM_L_SHIFT						28
-#define OMAP54XX_CMD_VDD_MM_L_WIDTH						0x1
-#define OMAP54XX_CMD_VDD_MM_L_MASK						(1 << 28)
-
-/* Used by PRM_VC_SMPS_MPU_CONFIG */
-#define OMAP54XX_CMD_VDD_MPU_L_SHIFT						28
-#define OMAP54XX_CMD_VDD_MPU_L_WIDTH						0x1
-#define OMAP54XX_CMD_VDD_MPU_L_MASK						(1 << 28)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP54XX_CORE_OCMRAM_ONSTATE_SHIFT					18
-#define OMAP54XX_CORE_OCMRAM_ONSTATE_WIDTH					0x2
-#define OMAP54XX_CORE_OCMRAM_ONSTATE_MASK					(0x3 << 18)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP54XX_CORE_OCMRAM_RETSTATE_SHIFT					9
-#define OMAP54XX_CORE_OCMRAM_RETSTATE_WIDTH					0x1
-#define OMAP54XX_CORE_OCMRAM_RETSTATE_MASK					(1 << 9)
-
-/* Used by PM_CORE_PWRSTST */
-#define OMAP54XX_CORE_OCMRAM_STATEST_SHIFT					6
-#define OMAP54XX_CORE_OCMRAM_STATEST_WIDTH					0x2
-#define OMAP54XX_CORE_OCMRAM_STATEST_MASK					(0x3 << 6)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP54XX_CORE_OTHER_BANK_ONSTATE_SHIFT					16
-#define OMAP54XX_CORE_OTHER_BANK_ONSTATE_WIDTH					0x2
-#define OMAP54XX_CORE_OTHER_BANK_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP54XX_CORE_OTHER_BANK_RETSTATE_SHIFT					8
-#define OMAP54XX_CORE_OTHER_BANK_RETSTATE_WIDTH					0x1
-#define OMAP54XX_CORE_OTHER_BANK_RETSTATE_MASK					(1 << 8)
-
-/* Used by PM_CORE_PWRSTST */
-#define OMAP54XX_CORE_OTHER_BANK_STATEST_SHIFT					4
-#define OMAP54XX_CORE_OTHER_BANK_STATEST_WIDTH					0x2
-#define OMAP54XX_CORE_OTHER_BANK_STATEST_MASK					(0x3 << 4)
-
-/* Used by REVISION_PRM */
-#define OMAP54XX_CUSTOM_SHIFT							6
-#define OMAP54XX_CUSTOM_WIDTH							0x2
-#define OMAP54XX_CUSTOM_MASK							(0x3 << 6)
-
-/* Used by PRM_VC_VAL_BYPASS */
-#define OMAP54XX_DATA_SHIFT							16
-#define OMAP54XX_DATA_WIDTH							0x8
-#define OMAP54XX_DATA_MASK							(0xff << 16)
-
-/* Used by PRM_DEBUG_CORE_RET_TRANS */
-#define OMAP54XX_PRM_DEBUG_OUT_SHIFT						0
-#define OMAP54XX_PRM_DEBUG_OUT_WIDTH						0x1c
-#define OMAP54XX_PRM_DEBUG_OUT_MASK						(0xfffffff << 0)
-
-/* Renamed from DEBUG_OUT Used by PRM_DEBUG_MM_RET_TRANS */
-#define OMAP54XX_DEBUG_OUT_0_9_SHIFT						0
-#define OMAP54XX_DEBUG_OUT_0_9_WIDTH						0xa
-#define OMAP54XX_DEBUG_OUT_0_9_MASK						(0x3ff << 0)
-
-/* Renamed from DEBUG_OUT Used by PRM_DEBUG_MPU_RET_TRANS */
-#define OMAP54XX_DEBUG_OUT_0_6_SHIFT						0
-#define OMAP54XX_DEBUG_OUT_0_6_WIDTH						0x7
-#define OMAP54XX_DEBUG_OUT_0_6_MASK						(0x7f << 0)
-
-/* Renamed from DEBUG_OUT Used by PRM_DEBUG_OFF_TRANS */
-#define OMAP54XX_DEBUG_OUT_0_31_SHIFT						0
-#define OMAP54XX_DEBUG_OUT_0_31_WIDTH						0x20
-#define OMAP54XX_DEBUG_OUT_0_31_MASK						(0xffffffff << 0)
-
-/* Renamed from DEBUG_OUT Used by PRM_DEBUG_WKUPAON_FD_TRANS */
-#define OMAP54XX_DEBUG_OUT_0_11_SHIFT						0
-#define OMAP54XX_DEBUG_OUT_0_11_WIDTH						0xc
-#define OMAP54XX_DEBUG_OUT_0_11_MASK						(0xfff << 0)
-
-/* Used by PRM_DEVICE_OFF_CTRL */
-#define OMAP54XX_DEVICE_OFF_ENABLE_SHIFT					0
-#define OMAP54XX_DEVICE_OFF_ENABLE_WIDTH					0x1
-#define OMAP54XX_DEVICE_OFF_ENABLE_MASK						(1 << 0)
-
-/* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP54XX_DFILTEREN_SHIFT						6
-#define OMAP54XX_DFILTEREN_WIDTH						0x1
-#define OMAP54XX_DFILTEREN_MASK							(1 << 6)
-
-/* Used by PRM_IRQENABLE_DSP, PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_DPLL_ABE_RECAL_EN_SHIFT					4
-#define OMAP54XX_DPLL_ABE_RECAL_EN_WIDTH					0x1
-#define OMAP54XX_DPLL_ABE_RECAL_EN_MASK						(1 << 4)
-
-/* Used by PRM_IRQSTATUS_DSP, PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_DPLL_ABE_RECAL_ST_SHIFT					4
-#define OMAP54XX_DPLL_ABE_RECAL_ST_WIDTH					0x1
-#define OMAP54XX_DPLL_ABE_RECAL_ST_MASK						(1 << 4)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_DPLL_CORE_RECAL_EN_SHIFT					0
-#define OMAP54XX_DPLL_CORE_RECAL_EN_WIDTH					0x1
-#define OMAP54XX_DPLL_CORE_RECAL_EN_MASK					(1 << 0)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_DPLL_CORE_RECAL_ST_SHIFT					0
-#define OMAP54XX_DPLL_CORE_RECAL_ST_WIDTH					0x1
-#define OMAP54XX_DPLL_CORE_RECAL_ST_MASK					(1 << 0)
-
-/* Used by PRM_IRQENABLE_DSP, PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_DPLL_IVA_RECAL_EN_SHIFT					2
-#define OMAP54XX_DPLL_IVA_RECAL_EN_WIDTH					0x1
-#define OMAP54XX_DPLL_IVA_RECAL_EN_MASK						(1 << 2)
-
-/* Used by PRM_IRQSTATUS_DSP, PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_DPLL_IVA_RECAL_ST_SHIFT					2
-#define OMAP54XX_DPLL_IVA_RECAL_ST_WIDTH					0x1
-#define OMAP54XX_DPLL_IVA_RECAL_ST_MASK						(1 << 2)
-
-/* Used by PRM_IRQENABLE_MPU */
-#define OMAP54XX_DPLL_MPU_RECAL_EN_SHIFT					1
-#define OMAP54XX_DPLL_MPU_RECAL_EN_WIDTH					0x1
-#define OMAP54XX_DPLL_MPU_RECAL_EN_MASK						(1 << 1)
-
-/* Used by PRM_IRQSTATUS_MPU */
-#define OMAP54XX_DPLL_MPU_RECAL_ST_SHIFT					1
-#define OMAP54XX_DPLL_MPU_RECAL_ST_WIDTH					0x1
-#define OMAP54XX_DPLL_MPU_RECAL_ST_MASK						(1 << 1)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_DPLL_PER_RECAL_EN_SHIFT					3
-#define OMAP54XX_DPLL_PER_RECAL_EN_WIDTH					0x1
-#define OMAP54XX_DPLL_PER_RECAL_EN_MASK						(1 << 3)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_DPLL_PER_RECAL_ST_SHIFT					3
-#define OMAP54XX_DPLL_PER_RECAL_ST_WIDTH					0x1
-#define OMAP54XX_DPLL_PER_RECAL_ST_MASK						(1 << 3)
-
-/* Used by PM_DSP_PWRSTCTRL */
-#define OMAP54XX_DSP_EDMA_ONSTATE_SHIFT						20
-#define OMAP54XX_DSP_EDMA_ONSTATE_WIDTH						0x2
-#define OMAP54XX_DSP_EDMA_ONSTATE_MASK						(0x3 << 20)
-
-/* Used by PM_DSP_PWRSTCTRL */
-#define OMAP54XX_DSP_EDMA_RETSTATE_SHIFT					10
-#define OMAP54XX_DSP_EDMA_RETSTATE_WIDTH					0x1
-#define OMAP54XX_DSP_EDMA_RETSTATE_MASK						(1 << 10)
-
-/* Used by PM_DSP_PWRSTST */
-#define OMAP54XX_DSP_EDMA_STATEST_SHIFT						8
-#define OMAP54XX_DSP_EDMA_STATEST_WIDTH						0x2
-#define OMAP54XX_DSP_EDMA_STATEST_MASK						(0x3 << 8)
-
-/* Used by PM_DSP_PWRSTCTRL */
-#define OMAP54XX_DSP_L1_ONSTATE_SHIFT						16
-#define OMAP54XX_DSP_L1_ONSTATE_WIDTH						0x2
-#define OMAP54XX_DSP_L1_ONSTATE_MASK						(0x3 << 16)
-
-/* Used by PM_DSP_PWRSTCTRL */
-#define OMAP54XX_DSP_L1_RETSTATE_SHIFT						8
-#define OMAP54XX_DSP_L1_RETSTATE_WIDTH						0x1
-#define OMAP54XX_DSP_L1_RETSTATE_MASK						(1 << 8)
-
-/* Used by PM_DSP_PWRSTST */
-#define OMAP54XX_DSP_L1_STATEST_SHIFT						4
-#define OMAP54XX_DSP_L1_STATEST_WIDTH						0x2
-#define OMAP54XX_DSP_L1_STATEST_MASK						(0x3 << 4)
-
-/* Used by PM_DSP_PWRSTCTRL */
-#define OMAP54XX_DSP_L2_ONSTATE_SHIFT						18
-#define OMAP54XX_DSP_L2_ONSTATE_WIDTH						0x2
-#define OMAP54XX_DSP_L2_ONSTATE_MASK						(0x3 << 18)
-
-/* Used by PM_DSP_PWRSTCTRL */
-#define OMAP54XX_DSP_L2_RETSTATE_SHIFT						9
-#define OMAP54XX_DSP_L2_RETSTATE_WIDTH						0x1
-#define OMAP54XX_DSP_L2_RETSTATE_MASK						(1 << 9)
-
-/* Used by PM_DSP_PWRSTST */
-#define OMAP54XX_DSP_L2_STATEST_SHIFT						6
-#define OMAP54XX_DSP_L2_STATEST_WIDTH						0x2
-#define OMAP54XX_DSP_L2_STATEST_MASK						(0x3 << 6)
-
-/* Used by PM_DSS_PWRSTCTRL */
-#define OMAP54XX_DSS_MEM_ONSTATE_SHIFT						16
-#define OMAP54XX_DSS_MEM_ONSTATE_WIDTH						0x2
-#define OMAP54XX_DSS_MEM_ONSTATE_MASK						(0x3 << 16)
-
-/* Used by PM_DSS_PWRSTCTRL */
-#define OMAP54XX_DSS_MEM_RETSTATE_SHIFT						8
-#define OMAP54XX_DSS_MEM_RETSTATE_WIDTH						0x1
-#define OMAP54XX_DSS_MEM_RETSTATE_MASK						(1 << 8)
-
-/* Used by PM_DSS_PWRSTST */
-#define OMAP54XX_DSS_MEM_STATEST_SHIFT						4
-#define OMAP54XX_DSS_MEM_STATEST_WIDTH						0x2
-#define OMAP54XX_DSS_MEM_STATEST_MASK						(0x3 << 4)
-
-/* Used by PRM_DEVICE_OFF_CTRL */
-#define OMAP54XX_EMIF1_OFFWKUP_DISABLE_SHIFT					8
-#define OMAP54XX_EMIF1_OFFWKUP_DISABLE_WIDTH					0x1
-#define OMAP54XX_EMIF1_OFFWKUP_DISABLE_MASK					(1 << 8)
-
-/* Used by PRM_DEVICE_OFF_CTRL */
-#define OMAP54XX_EMIF2_OFFWKUP_DISABLE_SHIFT					9
-#define OMAP54XX_EMIF2_OFFWKUP_DISABLE_WIDTH					0x1
-#define OMAP54XX_EMIF2_OFFWKUP_DISABLE_MASK					(1 << 9)
-
-/* Used by PM_EMU_PWRSTCTRL */
-#define OMAP54XX_EMU_BANK_ONSTATE_SHIFT						16
-#define OMAP54XX_EMU_BANK_ONSTATE_WIDTH						0x2
-#define OMAP54XX_EMU_BANK_ONSTATE_MASK						(0x3 << 16)
-
-/* Used by PM_EMU_PWRSTST */
-#define OMAP54XX_EMU_BANK_STATEST_SHIFT						4
-#define OMAP54XX_EMU_BANK_STATEST_WIDTH						0x2
-#define OMAP54XX_EMU_BANK_STATEST_MASK						(0x3 << 4)
-
-/*
- * Used by PRM_SLDO_CORE_SETUP, PRM_SLDO_MM_SETUP, PRM_SLDO_MPU_SETUP,
- * PRM_SRAM_WKUP_SETUP
- */
-#define OMAP54XX_ENABLE_RTA_SHIFT						0
-#define OMAP54XX_ENABLE_RTA_WIDTH						0x1
-#define OMAP54XX_ENABLE_RTA_MASK						(1 << 0)
-
-/* Used by PRM_SLDO_CORE_SETUP, PRM_SLDO_MM_SETUP, PRM_SLDO_MPU_SETUP */
-#define OMAP54XX_ENFUNC1_SHIFT							3
-#define OMAP54XX_ENFUNC1_WIDTH							0x1
-#define OMAP54XX_ENFUNC1_MASK							(1 << 3)
-
-/* Used by PRM_SLDO_CORE_SETUP, PRM_SLDO_MM_SETUP, PRM_SLDO_MPU_SETUP */
-#define OMAP54XX_ENFUNC2_SHIFT							4
-#define OMAP54XX_ENFUNC2_WIDTH							0x1
-#define OMAP54XX_ENFUNC2_MASK							(1 << 4)
-
-/* Used by PRM_SLDO_CORE_SETUP, PRM_SLDO_MM_SETUP, PRM_SLDO_MPU_SETUP */
-#define OMAP54XX_ENFUNC3_SHIFT							5
-#define OMAP54XX_ENFUNC3_WIDTH							0x1
-#define OMAP54XX_ENFUNC3_MASK							(1 << 5)
-
-/* Used by PRM_SLDO_CORE_SETUP, PRM_SLDO_MM_SETUP, PRM_SLDO_MPU_SETUP */
-#define OMAP54XX_ENFUNC4_SHIFT							6
-#define OMAP54XX_ENFUNC4_WIDTH							0x1
-#define OMAP54XX_ENFUNC4_MASK							(1 << 6)
-
-/* Used by PRM_SLDO_CORE_SETUP, PRM_SLDO_MM_SETUP, PRM_SLDO_MPU_SETUP */
-#define OMAP54XX_ENFUNC5_SHIFT							7
-#define OMAP54XX_ENFUNC5_WIDTH							0x1
-#define OMAP54XX_ENFUNC5_MASK							(1 << 7)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_MM_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP54XX_ERRORGAIN_SHIFT						16
-#define OMAP54XX_ERRORGAIN_WIDTH						0x8
-#define OMAP54XX_ERRORGAIN_MASK							(0xff << 16)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_MM_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP54XX_ERROROFFSET_SHIFT						24
-#define OMAP54XX_ERROROFFSET_WIDTH						0x8
-#define OMAP54XX_ERROROFFSET_MASK						(0xff << 24)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_EXTERNAL_WARM_RST_SHIFT					5
-#define OMAP54XX_EXTERNAL_WARM_RST_WIDTH					0x1
-#define OMAP54XX_EXTERNAL_WARM_RST_MASK						(1 << 5)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_MM_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP54XX_FORCEUPDATE_SHIFT						1
-#define OMAP54XX_FORCEUPDATE_WIDTH						0x1
-#define OMAP54XX_FORCEUPDATE_MASK						(1 << 1)
-
-/* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_MM_VOLTAGE, PRM_VP_MPU_VOLTAGE */
-#define OMAP54XX_FORCEUPDATEWAIT_SHIFT						8
-#define OMAP54XX_FORCEUPDATEWAIT_WIDTH						0x18
-#define OMAP54XX_FORCEUPDATEWAIT_MASK						(0xffffff << 8)
-
-/* Used by PRM_IRQENABLE_DSP, PRM_IRQENABLE_IPU */
-#define OMAP54XX_FORCEWKUP_EN_SHIFT						10
-#define OMAP54XX_FORCEWKUP_EN_WIDTH						0x1
-#define OMAP54XX_FORCEWKUP_EN_MASK						(1 << 10)
-
-/* Used by PRM_IRQSTATUS_DSP, PRM_IRQSTATUS_IPU */
-#define OMAP54XX_FORCEWKUP_ST_SHIFT						10
-#define OMAP54XX_FORCEWKUP_ST_WIDTH						0x1
-#define OMAP54XX_FORCEWKUP_ST_MASK						(1 << 10)
-
-/* Used by REVISION_PRM */
-#define OMAP54XX_FUNC_SHIFT							16
-#define OMAP54XX_FUNC_WIDTH							0xc
-#define OMAP54XX_FUNC_MASK							(0xfff << 16)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_GLOBAL_COLD_RST_SHIFT						0
-#define OMAP54XX_GLOBAL_COLD_RST_WIDTH						0x1
-#define OMAP54XX_GLOBAL_COLD_RST_MASK						(1 << 0)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_GLOBAL_WARM_SW_RST_SHIFT					1
-#define OMAP54XX_GLOBAL_WARM_SW_RST_WIDTH					0x1
-#define OMAP54XX_GLOBAL_WARM_SW_RST_MASK					(1 << 1)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP54XX_GLOBAL_WUEN_SHIFT						16
-#define OMAP54XX_GLOBAL_WUEN_WIDTH						0x1
-#define OMAP54XX_GLOBAL_WUEN_MASK						(1 << 16)
-
-/* Used by PM_GPU_PWRSTCTRL */
-#define OMAP54XX_GPU_MEM_ONSTATE_SHIFT						16
-#define OMAP54XX_GPU_MEM_ONSTATE_WIDTH						0x2
-#define OMAP54XX_GPU_MEM_ONSTATE_MASK						(0x3 << 16)
-
-/* Used by PM_GPU_PWRSTST */
-#define OMAP54XX_GPU_MEM_STATEST_SHIFT						4
-#define OMAP54XX_GPU_MEM_STATEST_WIDTH						0x2
-#define OMAP54XX_GPU_MEM_STATEST_MASK						(0x3 << 4)
-
-/* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP54XX_HSMCODE_SHIFT							0
-#define OMAP54XX_HSMCODE_WIDTH							0x3
-#define OMAP54XX_HSMCODE_MASK							(0x7 << 0)
-
-/* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP54XX_HSMODEEN_SHIFT							3
-#define OMAP54XX_HSMODEEN_WIDTH							0x1
-#define OMAP54XX_HSMODEEN_MASK							(1 << 3)
-
-/* Used by PRM_VC_CFG_I2C_CLK */
-#define OMAP54XX_HSSCLH_SHIFT							16
-#define OMAP54XX_HSSCLH_WIDTH							0x8
-#define OMAP54XX_HSSCLH_MASK							(0xff << 16)
-
-/* Used by PRM_VC_CFG_I2C_CLK */
-#define OMAP54XX_HSSCLL_SHIFT							24
-#define OMAP54XX_HSSCLL_WIDTH							0x8
-#define OMAP54XX_HSSCLL_MASK							(0xff << 24)
-
-/* Used by PM_IVA_PWRSTCTRL */
-#define OMAP54XX_HWA_MEM_ONSTATE_SHIFT						16
-#define OMAP54XX_HWA_MEM_ONSTATE_WIDTH						0x2
-#define OMAP54XX_HWA_MEM_ONSTATE_MASK						(0x3 << 16)
-
-/* Used by PM_IVA_PWRSTCTRL */
-#define OMAP54XX_HWA_MEM_RETSTATE_SHIFT						8
-#define OMAP54XX_HWA_MEM_RETSTATE_WIDTH						0x1
-#define OMAP54XX_HWA_MEM_RETSTATE_MASK						(1 << 8)
-
-/* Used by PM_IVA_PWRSTST */
-#define OMAP54XX_HWA_MEM_STATEST_SHIFT						4
-#define OMAP54XX_HWA_MEM_STATEST_WIDTH						0x2
-#define OMAP54XX_HWA_MEM_STATEST_MASK						(0x3 << 4)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_ICEPICK_RST_SHIFT						9
-#define OMAP54XX_ICEPICK_RST_WIDTH						0x1
-#define OMAP54XX_ICEPICK_RST_MASK						(1 << 9)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_MM_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP54XX_INITVDD_SHIFT							2
-#define OMAP54XX_INITVDD_WIDTH							0x1
-#define OMAP54XX_INITVDD_MASK							(1 << 2)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_MM_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP54XX_INITVOLTAGE_SHIFT						8
-#define OMAP54XX_INITVOLTAGE_WIDTH						0x8
-#define OMAP54XX_INITVOLTAGE_MASK						(0xff << 8)
-
-/*
- * Used by PM_ABE_PWRSTST, PM_CAM_PWRSTST, PM_CORE_PWRSTST,
- * PM_CUSTEFUSE_PWRSTST, PM_DSP_PWRSTST, PM_DSS_PWRSTST, PM_EMU_PWRSTST,
- * PM_GPU_PWRSTST, PM_IVA_PWRSTST, PM_L3INIT_PWRSTST, PM_MPU_PWRSTST,
- * PRM_VOLTST_MM, PRM_VOLTST_MPU
- */
-#define OMAP54XX_INTRANSITION_SHIFT						20
-#define OMAP54XX_INTRANSITION_WIDTH						0x1
-#define OMAP54XX_INTRANSITION_MASK						(1 << 20)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_IO_EN_SHIFT							9
-#define OMAP54XX_IO_EN_WIDTH							0x1
-#define OMAP54XX_IO_EN_MASK							(1 << 9)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP54XX_IO_ON_STATUS_SHIFT						5
-#define OMAP54XX_IO_ON_STATUS_WIDTH						0x1
-#define OMAP54XX_IO_ON_STATUS_MASK						(1 << 5)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_IO_ST_SHIFT							9
-#define OMAP54XX_IO_ST_WIDTH							0x1
-#define OMAP54XX_IO_ST_MASK							(1 << 9)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP54XX_IPU_L2RAM_ONSTATE_SHIFT					20
-#define OMAP54XX_IPU_L2RAM_ONSTATE_WIDTH					0x2
-#define OMAP54XX_IPU_L2RAM_ONSTATE_MASK						(0x3 << 20)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP54XX_IPU_L2RAM_RETSTATE_SHIFT					10
-#define OMAP54XX_IPU_L2RAM_RETSTATE_WIDTH					0x1
-#define OMAP54XX_IPU_L2RAM_RETSTATE_MASK					(1 << 10)
-
-/* Used by PM_CORE_PWRSTST */
-#define OMAP54XX_IPU_L2RAM_STATEST_SHIFT					8
-#define OMAP54XX_IPU_L2RAM_STATEST_WIDTH					0x2
-#define OMAP54XX_IPU_L2RAM_STATEST_MASK						(0x3 << 8)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP54XX_IPU_UNICACHE_ONSTATE_SHIFT					22
-#define OMAP54XX_IPU_UNICACHE_ONSTATE_WIDTH					0x2
-#define OMAP54XX_IPU_UNICACHE_ONSTATE_MASK					(0x3 << 22)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP54XX_IPU_UNICACHE_RETSTATE_SHIFT					11
-#define OMAP54XX_IPU_UNICACHE_RETSTATE_WIDTH					0x1
-#define OMAP54XX_IPU_UNICACHE_RETSTATE_MASK					(1 << 11)
-
-/* Used by PM_CORE_PWRSTST */
-#define OMAP54XX_IPU_UNICACHE_STATEST_SHIFT					10
-#define OMAP54XX_IPU_UNICACHE_STATEST_WIDTH					0x2
-#define OMAP54XX_IPU_UNICACHE_STATEST_MASK					(0x3 << 10)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP54XX_ISOCLK_OVERRIDE_SHIFT						0
-#define OMAP54XX_ISOCLK_OVERRIDE_WIDTH						0x1
-#define OMAP54XX_ISOCLK_OVERRIDE_MASK						(1 << 0)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP54XX_ISOCLK_STATUS_SHIFT						1
-#define OMAP54XX_ISOCLK_STATUS_WIDTH						0x1
-#define OMAP54XX_ISOCLK_STATUS_MASK						(1 << 1)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP54XX_ISOOVR_EXTEND_SHIFT						4
-#define OMAP54XX_ISOOVR_EXTEND_WIDTH						0x1
-#define OMAP54XX_ISOOVR_EXTEND_MASK						(1 << 4)
-
-/* Used by PRM_IO_COUNT */
-#define OMAP54XX_ISO_2_ON_TIME_SHIFT						0
-#define OMAP54XX_ISO_2_ON_TIME_WIDTH						0x8
-#define OMAP54XX_ISO_2_ON_TIME_MASK						(0xff << 0)
-
-/* Used by PM_L3INIT_PWRSTCTRL */
-#define OMAP54XX_L3INIT_BANK1_ONSTATE_SHIFT					16
-#define OMAP54XX_L3INIT_BANK1_ONSTATE_WIDTH					0x2
-#define OMAP54XX_L3INIT_BANK1_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_L3INIT_PWRSTCTRL */
-#define OMAP54XX_L3INIT_BANK1_RETSTATE_SHIFT					8
-#define OMAP54XX_L3INIT_BANK1_RETSTATE_WIDTH					0x1
-#define OMAP54XX_L3INIT_BANK1_RETSTATE_MASK					(1 << 8)
-
-/* Used by PM_L3INIT_PWRSTST */
-#define OMAP54XX_L3INIT_BANK1_STATEST_SHIFT					4
-#define OMAP54XX_L3INIT_BANK1_STATEST_WIDTH					0x2
-#define OMAP54XX_L3INIT_BANK1_STATEST_MASK					(0x3 << 4)
-
-/* Used by PM_L3INIT_PWRSTCTRL */
-#define OMAP54XX_L3INIT_BANK2_ONSTATE_SHIFT					18
-#define OMAP54XX_L3INIT_BANK2_ONSTATE_WIDTH					0x2
-#define OMAP54XX_L3INIT_BANK2_ONSTATE_MASK					(0x3 << 18)
-
-/* Used by PM_L3INIT_PWRSTCTRL */
-#define OMAP54XX_L3INIT_BANK2_RETSTATE_SHIFT					9
-#define OMAP54XX_L3INIT_BANK2_RETSTATE_WIDTH					0x1
-#define OMAP54XX_L3INIT_BANK2_RETSTATE_MASK					(1 << 9)
-
-/* Used by PM_L3INIT_PWRSTST */
-#define OMAP54XX_L3INIT_BANK2_STATEST_SHIFT					6
-#define OMAP54XX_L3INIT_BANK2_STATEST_WIDTH					0x2
-#define OMAP54XX_L3INIT_BANK2_STATEST_MASK					(0x3 << 6)
-
-/*
- * Used by PM_ABE_PWRSTST, PM_CAM_PWRSTST, PM_CORE_PWRSTST,
- * PM_CUSTEFUSE_PWRSTST, PM_DSP_PWRSTST, PM_DSS_PWRSTST, PM_EMU_PWRSTST,
- * PM_GPU_PWRSTST, PM_IVA_PWRSTST, PM_L3INIT_PWRSTST, PM_MPU_PWRSTST
- */
-#define OMAP54XX_LASTPOWERSTATEENTERED_SHIFT					24
-#define OMAP54XX_LASTPOWERSTATEENTERED_WIDTH					0x2
-#define OMAP54XX_LASTPOWERSTATEENTERED_MASK					(0x3 << 24)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_LLI_RST_SHIFT							14
-#define OMAP54XX_LLI_RST_WIDTH							0x1
-#define OMAP54XX_LLI_RST_MASK							(1 << 14)
-
-/*
- * Used by PM_ABE_PWRSTCTRL, PM_CORE_PWRSTCTRL, PM_DSP_PWRSTCTRL,
- * PM_DSS_PWRSTCTRL, PM_IVA_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, PM_MPU_PWRSTCTRL
- */
-#define OMAP54XX_LOGICRETSTATE_SHIFT						2
-#define OMAP54XX_LOGICRETSTATE_WIDTH						0x1
-#define OMAP54XX_LOGICRETSTATE_MASK						(1 << 2)
-
-/*
- * Used by PM_ABE_PWRSTST, PM_CAM_PWRSTST, PM_CORE_PWRSTST,
- * PM_CUSTEFUSE_PWRSTST, PM_DSP_PWRSTST, PM_DSS_PWRSTST, PM_EMU_PWRSTST,
- * PM_GPU_PWRSTST, PM_IVA_PWRSTST, PM_L3INIT_PWRSTST, PM_MPU_PWRSTST
- */
-#define OMAP54XX_LOGICSTATEST_SHIFT						2
-#define OMAP54XX_LOGICSTATEST_WIDTH						0x1
-#define OMAP54XX_LOGICSTATEST_MASK						(1 << 2)
-
-/*
- * Used by RM_ABE_AESS_CONTEXT, RM_ABE_DMIC_CONTEXT, RM_ABE_MCASP_CONTEXT,
- * RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT, RM_ABE_MCBSP3_CONTEXT,
- * RM_ABE_MCPDM_CONTEXT, RM_ABE_SLIMBUS1_CONTEXT, RM_ABE_TIMER5_CONTEXT,
- * RM_ABE_TIMER6_CONTEXT, RM_ABE_TIMER7_CONTEXT, RM_ABE_TIMER8_CONTEXT,
- * RM_ABE_WD_TIMER3_CONTEXT, RM_C2C_C2C_CONTEXT, RM_C2C_C2C_OCP_FW_CONTEXT,
- * RM_CAM_CAL_CONTEXT, RM_CAM_FDIF_CONTEXT, RM_CAM_ISS_CONTEXT,
- * RM_COREAON_SMARTREFLEX_CORE_CONTEXT, RM_COREAON_SMARTREFLEX_MM_CONTEXT,
- * RM_COREAON_SMARTREFLEX_MPU_CONTEXT, RM_CUSTEFUSE_EFUSE_CTRL_CUST_CONTEXT,
- * RM_DSP_DSP_CONTEXT, RM_DSS_BB2D_CONTEXT, RM_DSS_DSS_CONTEXT,
- * RM_EMIF_DMM_CONTEXT, RM_EMIF_EMIF1_CONTEXT, RM_EMIF_EMIF2_CONTEXT,
- * RM_EMIF_EMIF_DLL_CONTEXT, RM_EMIF_EMIF_OCP_FW_CONTEXT,
- * RM_EMU_DEBUGSS_CONTEXT, RM_GPU_GPU_CONTEXT, RM_IPU_IPU_CONTEXT,
- * RM_IVA_IVA_CONTEXT, RM_IVA_SL2_CONTEXT, RM_L3INIT_IEEE1500_2_OCP_CONTEXT,
- * RM_L3INIT_OCP2SCP1_CONTEXT, RM_L3INIT_OCP2SCP3_CONTEXT,
- * RM_L3INIT_SATA_CONTEXT, RM_L3INIT_UNIPRO2_CONTEXT,
- * RM_L3INSTR_L3_INSTR_CONTEXT, RM_L3INSTR_L3_MAIN_3_CONTEXT,
- * RM_L3INSTR_OCP_WP_NOC_CONTEXT, RM_L3MAIN1_L3_MAIN_1_CONTEXT,
- * RM_L3MAIN2_L3_MAIN_2_CONTEXT, RM_L3MAIN2_OCMC_RAM_CONTEXT,
- * RM_L4CFG_L4_CFG_CONTEXT, RM_L4CFG_OCP2SCP2_CONTEXT,
- * RM_L4CFG_SAR_ROM_CONTEXT, RM_L4PER_ELM_CONTEXT, RM_L4PER_HDQ1W_CONTEXT,
- * RM_L4PER_I2C2_CONTEXT, RM_L4PER_I2C3_CONTEXT, RM_L4PER_I2C4_CONTEXT,
- * RM_L4PER_I2C5_CONTEXT, RM_L4PER_L4_PER_CONTEXT, RM_L4PER_MCSPI1_CONTEXT,
- * RM_L4PER_MCSPI2_CONTEXT, RM_L4PER_MCSPI3_CONTEXT, RM_L4PER_MCSPI4_CONTEXT,
- * RM_L4PER_MMC3_CONTEXT, RM_L4PER_MMC4_CONTEXT, RM_L4PER_MMC5_CONTEXT,
- * RM_L4PER_TIMER10_CONTEXT, RM_L4PER_TIMER11_CONTEXT, RM_L4PER_TIMER2_CONTEXT,
- * RM_L4PER_TIMER3_CONTEXT, RM_L4PER_TIMER4_CONTEXT, RM_L4PER_TIMER9_CONTEXT,
- * RM_L4SEC_FPKA_CONTEXT, RM_MIPIEXT_LLI_CONTEXT,
- * RM_MIPIEXT_LLI_OCP_FW_CONTEXT, RM_MIPIEXT_MPHY_CONTEXT, RM_MPU_MPU_CONTEXT,
- * RM_WKUPAON_COUNTER_32K_CONTEXT, RM_WKUPAON_GPIO1_CONTEXT,
- * RM_WKUPAON_KBD_CONTEXT, RM_WKUPAON_L4_WKUP_CONTEXT,
- * RM_WKUPAON_SAR_RAM_CONTEXT, RM_WKUPAON_TIMER12_CONTEXT,
- * RM_WKUPAON_TIMER1_CONTEXT, RM_WKUPAON_WD_TIMER1_CONTEXT,
- * RM_WKUPAON_WD_TIMER2_CONTEXT
- */
-#define OMAP54XX_LOSTCONTEXT_DFF_SHIFT						0
-#define OMAP54XX_LOSTCONTEXT_DFF_WIDTH						0x1
-#define OMAP54XX_LOSTCONTEXT_DFF_MASK						(1 << 0)
-
-/*
- * Used by RM_C2C_C2C_CONTEXT, RM_C2C_C2C_OCP_FW_CONTEXT,
- * RM_C2C_MODEM_ICR_CONTEXT, RM_DMA_DMA_SYSTEM_CONTEXT, RM_DSP_DSP_CONTEXT,
- * RM_DSS_DSS_CONTEXT, RM_EMIF_DMM_CONTEXT, RM_EMIF_EMIF1_CONTEXT,
- * RM_EMIF_EMIF2_CONTEXT, RM_EMIF_EMIF_OCP_FW_CONTEXT, RM_IPU_IPU_CONTEXT,
- * RM_L3INIT_HSI_CONTEXT, RM_L3INIT_MMC1_CONTEXT, RM_L3INIT_MMC2_CONTEXT,
- * RM_L3INIT_USB_HOST_HS_CONTEXT, RM_L3INIT_USB_OTG_SS_CONTEXT,
- * RM_L3INIT_USB_TLL_HS_CONTEXT, RM_L3INSTR_L3_MAIN_3_CONTEXT,
- * RM_L3INSTR_OCP_WP_NOC_CONTEXT, RM_L3MAIN1_L3_MAIN_1_CONTEXT,
- * RM_L3MAIN2_GPMC_CONTEXT, RM_L3MAIN2_L3_MAIN_2_CONTEXT,
- * RM_L4CFG_L4_CFG_CONTEXT, RM_L4CFG_MAILBOX_CONTEXT,
- * RM_L4CFG_SPINLOCK_CONTEXT, RM_L4PER_GPIO2_CONTEXT, RM_L4PER_GPIO3_CONTEXT,
- * RM_L4PER_GPIO4_CONTEXT, RM_L4PER_GPIO5_CONTEXT, RM_L4PER_GPIO6_CONTEXT,
- * RM_L4PER_GPIO7_CONTEXT, RM_L4PER_GPIO8_CONTEXT, RM_L4PER_I2C1_CONTEXT,
- * RM_L4PER_L4_PER_CONTEXT, RM_L4PER_UART1_CONTEXT, RM_L4PER_UART2_CONTEXT,
- * RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT, RM_L4PER_UART5_CONTEXT,
- * RM_L4PER_UART6_CONTEXT, RM_L4SEC_AES1_CONTEXT, RM_L4SEC_AES2_CONTEXT,
- * RM_L4SEC_DES3DES_CONTEXT, RM_L4SEC_DMA_CRYPTO_CONTEXT, RM_L4SEC_RNG_CONTEXT,
- * RM_L4SEC_SHA2MD5_CONTEXT, RM_MIPIEXT_LLI_CONTEXT,
- * RM_MIPIEXT_LLI_OCP_FW_CONTEXT, RM_MIPIEXT_MPHY_CONTEXT, RM_MPU_MPU_CONTEXT
- */
-#define OMAP54XX_LOSTCONTEXT_RFF_SHIFT						1
-#define OMAP54XX_LOSTCONTEXT_RFF_WIDTH						0x1
-#define OMAP54XX_LOSTCONTEXT_RFF_MASK						(1 << 1)
-
-/* Used by RM_ABE_AESS_CONTEXT */
-#define OMAP54XX_LOSTMEM_AESSMEM_SHIFT						8
-#define OMAP54XX_LOSTMEM_AESSMEM_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_AESSMEM_MASK						(1 << 8)
-
-/* Used by RM_CAM_CAL_CONTEXT */
-#define OMAP54XX_LOSTMEM_CAL_MEM_SHIFT						8
-#define OMAP54XX_LOSTMEM_CAL_MEM_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_CAL_MEM_MASK						(1 << 8)
-
-/* Used by RM_CAM_FDIF_CONTEXT, RM_CAM_ISS_CONTEXT */
-#define OMAP54XX_LOSTMEM_CAM_MEM_SHIFT						8
-#define OMAP54XX_LOSTMEM_CAM_MEM_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_CAM_MEM_MASK						(1 << 8)
-
-/* Used by RM_EMIF_DMM_CONTEXT */
-#define OMAP54XX_LOSTMEM_CORE_NRET_BANK_SHIFT					9
-#define OMAP54XX_LOSTMEM_CORE_NRET_BANK_WIDTH					0x1
-#define OMAP54XX_LOSTMEM_CORE_NRET_BANK_MASK					(1 << 9)
-
-/* Renamed from LOSTMEM_CORE_NRET_BANK Used by RM_L3INSTR_OCP_WP_NOC_CONTEXT */
-#define OMAP54XX_LOSTMEM_CORE_NRET_BANK_8_8_SHIFT				8
-#define OMAP54XX_LOSTMEM_CORE_NRET_BANK_8_8_WIDTH				0x1
-#define OMAP54XX_LOSTMEM_CORE_NRET_BANK_8_8_MASK				(1 << 8)
-
-/* Used by RM_L3MAIN2_OCMC_RAM_CONTEXT */
-#define OMAP54XX_LOSTMEM_CORE_OCMRAM_SHIFT					8
-#define OMAP54XX_LOSTMEM_CORE_OCMRAM_WIDTH					0x1
-#define OMAP54XX_LOSTMEM_CORE_OCMRAM_MASK					(1 << 8)
-
-/* Used by RM_DMA_DMA_SYSTEM_CONTEXT, RM_EMIF_DMM_CONTEXT */
-#define OMAP54XX_LOSTMEM_CORE_OTHER_BANK_SHIFT					8
-#define OMAP54XX_LOSTMEM_CORE_OTHER_BANK_WIDTH					0x1
-#define OMAP54XX_LOSTMEM_CORE_OTHER_BANK_MASK					(1 << 8)
-
-/* Used by RM_DSP_DSP_CONTEXT */
-#define OMAP54XX_LOSTMEM_DSP_EDMA_SHIFT						10
-#define OMAP54XX_LOSTMEM_DSP_EDMA_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_DSP_EDMA_MASK						(1 << 10)
-
-/* Used by RM_DSP_DSP_CONTEXT */
-#define OMAP54XX_LOSTMEM_DSP_L1_SHIFT						8
-#define OMAP54XX_LOSTMEM_DSP_L1_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_DSP_L1_MASK						(1 << 8)
-
-/* Used by RM_DSP_DSP_CONTEXT */
-#define OMAP54XX_LOSTMEM_DSP_L2_SHIFT						9
-#define OMAP54XX_LOSTMEM_DSP_L2_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_DSP_L2_MASK						(1 << 9)
-
-/* Used by RM_DSS_BB2D_CONTEXT, RM_DSS_DSS_CONTEXT */
-#define OMAP54XX_LOSTMEM_DSS_MEM_SHIFT						8
-#define OMAP54XX_LOSTMEM_DSS_MEM_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_DSS_MEM_MASK						(1 << 8)
-
-/* Used by RM_EMU_DEBUGSS_CONTEXT */
-#define OMAP54XX_LOSTMEM_EMU_BANK_SHIFT						8
-#define OMAP54XX_LOSTMEM_EMU_BANK_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_EMU_BANK_MASK						(1 << 8)
-
-/* Used by RM_GPU_GPU_CONTEXT */
-#define OMAP54XX_LOSTMEM_GPU_MEM_SHIFT						8
-#define OMAP54XX_LOSTMEM_GPU_MEM_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_GPU_MEM_MASK						(1 << 8)
-
-/* Used by RM_IVA_IVA_CONTEXT */
-#define OMAP54XX_LOSTMEM_HWA_MEM_SHIFT						10
-#define OMAP54XX_LOSTMEM_HWA_MEM_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_HWA_MEM_MASK						(1 << 10)
-
-/* Used by RM_IPU_IPU_CONTEXT */
-#define OMAP54XX_LOSTMEM_IPU_L2RAM_SHIFT					9
-#define OMAP54XX_LOSTMEM_IPU_L2RAM_WIDTH					0x1
-#define OMAP54XX_LOSTMEM_IPU_L2RAM_MASK						(1 << 9)
-
-/* Used by RM_IPU_IPU_CONTEXT */
-#define OMAP54XX_LOSTMEM_IPU_UNICACHE_SHIFT					8
-#define OMAP54XX_LOSTMEM_IPU_UNICACHE_WIDTH					0x1
-#define OMAP54XX_LOSTMEM_IPU_UNICACHE_MASK					(1 << 8)
-
-/*
- * Used by RM_L3INIT_HSI_CONTEXT, RM_L3INIT_MMC1_CONTEXT,
- * RM_L3INIT_MMC2_CONTEXT, RM_L3INIT_SATA_CONTEXT, RM_L3INIT_UNIPRO2_CONTEXT,
- * RM_L3INIT_USB_OTG_SS_CONTEXT
- */
-#define OMAP54XX_LOSTMEM_L3INIT_BANK1_SHIFT					8
-#define OMAP54XX_LOSTMEM_L3INIT_BANK1_WIDTH					0x1
-#define OMAP54XX_LOSTMEM_L3INIT_BANK1_MASK					(1 << 8)
-
-/* Used by RM_MPU_MPU_CONTEXT */
-#define OMAP54XX_LOSTMEM_MPU_L2_SHIFT						9
-#define OMAP54XX_LOSTMEM_MPU_L2_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_MPU_L2_MASK						(1 << 9)
-
-/* Used by RM_MPU_MPU_CONTEXT */
-#define OMAP54XX_LOSTMEM_MPU_RAM_SHIFT						10
-#define OMAP54XX_LOSTMEM_MPU_RAM_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_MPU_RAM_MASK						(1 << 10)
-
-/*
- * Used by RM_L4PER_MMC3_CONTEXT, RM_L4PER_MMC4_CONTEXT, RM_L4PER_MMC5_CONTEXT,
- * RM_L4SEC_FPKA_CONTEXT
- */
-#define OMAP54XX_LOSTMEM_NONRETAINED_BANK_SHIFT					8
-#define OMAP54XX_LOSTMEM_NONRETAINED_BANK_WIDTH					0x1
-#define OMAP54XX_LOSTMEM_NONRETAINED_BANK_MASK					(1 << 8)
-
-/*
- * Used by RM_ABE_DMIC_CONTEXT, RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT,
- * RM_ABE_MCBSP3_CONTEXT, RM_ABE_MCPDM_CONTEXT, RM_ABE_SLIMBUS1_CONTEXT
- */
-#define OMAP54XX_LOSTMEM_PERIHPMEM_SHIFT					8
-#define OMAP54XX_LOSTMEM_PERIHPMEM_WIDTH					0x1
-#define OMAP54XX_LOSTMEM_PERIHPMEM_MASK						(1 << 8)
-
-/*
- * Used by RM_L4PER_UART1_CONTEXT, RM_L4PER_UART2_CONTEXT,
- * RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT, RM_L4PER_UART5_CONTEXT,
- * RM_L4PER_UART6_CONTEXT, RM_L4SEC_DMA_CRYPTO_CONTEXT
- */
-#define OMAP54XX_LOSTMEM_RETAINED_BANK_SHIFT					8
-#define OMAP54XX_LOSTMEM_RETAINED_BANK_WIDTH					0x1
-#define OMAP54XX_LOSTMEM_RETAINED_BANK_MASK					(1 << 8)
-
-/* Used by RM_IVA_SL2_CONTEXT */
-#define OMAP54XX_LOSTMEM_SL2_MEM_SHIFT						8
-#define OMAP54XX_LOSTMEM_SL2_MEM_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_SL2_MEM_MASK						(1 << 8)
-
-/* Used by RM_IVA_IVA_CONTEXT */
-#define OMAP54XX_LOSTMEM_TCM1_MEM_SHIFT						8
-#define OMAP54XX_LOSTMEM_TCM1_MEM_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_TCM1_MEM_MASK						(1 << 8)
-
-/* Used by RM_IVA_IVA_CONTEXT */
-#define OMAP54XX_LOSTMEM_TCM2_MEM_SHIFT						9
-#define OMAP54XX_LOSTMEM_TCM2_MEM_WIDTH						0x1
-#define OMAP54XX_LOSTMEM_TCM2_MEM_MASK						(1 << 9)
-
-/* Used by RM_WKUPAON_SAR_RAM_CONTEXT */
-#define OMAP54XX_LOSTMEM_WKUP_BANK_SHIFT					8
-#define OMAP54XX_LOSTMEM_WKUP_BANK_WIDTH					0x1
-#define OMAP54XX_LOSTMEM_WKUP_BANK_MASK						(1 << 8)
-
-/*
- * Used by PM_ABE_PWRSTCTRL, PM_CAM_PWRSTCTRL, PM_CORE_PWRSTCTRL,
- * PM_CUSTEFUSE_PWRSTCTRL, PM_DSP_PWRSTCTRL, PM_DSS_PWRSTCTRL,
- * PM_GPU_PWRSTCTRL, PM_IVA_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, PM_MPU_PWRSTCTRL
- */
-#define OMAP54XX_LOWPOWERSTATECHANGE_SHIFT					4
-#define OMAP54XX_LOWPOWERSTATECHANGE_WIDTH					0x1
-#define OMAP54XX_LOWPOWERSTATECHANGE_MASK					(1 << 4)
-
-/* Used by PRM_DEBUG_TRANS_CFG */
-#define OMAP54XX_MODE_SHIFT							0
-#define OMAP54XX_MODE_WIDTH							0x2
-#define OMAP54XX_MODE_MASK							(0x3 << 0)
-
-/* Used by PRM_MODEM_IF_CTRL */
-#define OMAP54XX_MODEM_SHUTDOWN_IRQ_SHIFT					9
-#define OMAP54XX_MODEM_SHUTDOWN_IRQ_WIDTH					0x1
-#define OMAP54XX_MODEM_SHUTDOWN_IRQ_MASK					(1 << 9)
-
-/* Used by PRM_MODEM_IF_CTRL */
-#define OMAP54XX_MODEM_WAKE_IRQ_SHIFT						8
-#define OMAP54XX_MODEM_WAKE_IRQ_WIDTH						0x1
-#define OMAP54XX_MODEM_WAKE_IRQ_MASK						(1 << 8)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP54XX_MPU_L2_ONSTATE_SHIFT						18
-#define OMAP54XX_MPU_L2_ONSTATE_WIDTH						0x2
-#define OMAP54XX_MPU_L2_ONSTATE_MASK						(0x3 << 18)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP54XX_MPU_L2_RETSTATE_SHIFT						9
-#define OMAP54XX_MPU_L2_RETSTATE_WIDTH						0x1
-#define OMAP54XX_MPU_L2_RETSTATE_MASK						(1 << 9)
-
-/* Used by PM_MPU_PWRSTST */
-#define OMAP54XX_MPU_L2_STATEST_SHIFT						6
-#define OMAP54XX_MPU_L2_STATEST_WIDTH						0x2
-#define OMAP54XX_MPU_L2_STATEST_MASK						(0x3 << 6)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP54XX_MPU_RAM_ONSTATE_SHIFT						20
-#define OMAP54XX_MPU_RAM_ONSTATE_WIDTH						0x2
-#define OMAP54XX_MPU_RAM_ONSTATE_MASK						(0x3 << 20)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP54XX_MPU_RAM_RETSTATE_SHIFT						10
-#define OMAP54XX_MPU_RAM_RETSTATE_WIDTH						0x1
-#define OMAP54XX_MPU_RAM_RETSTATE_MASK						(1 << 10)
-
-/* Used by PM_MPU_PWRSTST */
-#define OMAP54XX_MPU_RAM_STATEST_SHIFT						8
-#define OMAP54XX_MPU_RAM_STATEST_WIDTH						0x2
-#define OMAP54XX_MPU_RAM_STATEST_MASK						(0x3 << 8)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_MPU_SECURITY_VIOL_RST_SHIFT					2
-#define OMAP54XX_MPU_SECURITY_VIOL_RST_WIDTH					0x1
-#define OMAP54XX_MPU_SECURITY_VIOL_RST_MASK					(1 << 2)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_MPU_WDT_RST_SHIFT						3
-#define OMAP54XX_MPU_WDT_RST_WIDTH						0x1
-#define OMAP54XX_MPU_WDT_RST_MASK						(1 << 3)
-
-/* Used by PRM_ABBLDO_MM_SETUP, PRM_ABBLDO_MPU_SETUP */
-#define OMAP54XX_NOCAP_SHIFT							4
-#define OMAP54XX_NOCAP_WIDTH							0x1
-#define OMAP54XX_NOCAP_MASK							(1 << 4)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP54XX_OCP_NRET_BANK_ONSTATE_SHIFT					24
-#define OMAP54XX_OCP_NRET_BANK_ONSTATE_WIDTH					0x2
-#define OMAP54XX_OCP_NRET_BANK_ONSTATE_MASK					(0x3 << 24)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP54XX_OCP_NRET_BANK_RETSTATE_SHIFT					12
-#define OMAP54XX_OCP_NRET_BANK_RETSTATE_WIDTH					0x1
-#define OMAP54XX_OCP_NRET_BANK_RETSTATE_MASK					(1 << 12)
-
-/* Used by PM_CORE_PWRSTST */
-#define OMAP54XX_OCP_NRET_BANK_STATEST_SHIFT					12
-#define OMAP54XX_OCP_NRET_BANK_STATEST_WIDTH					0x2
-#define OMAP54XX_OCP_NRET_BANK_STATEST_MASK					(0x3 << 12)
-
-/*
- * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_MM_L,
- * PRM_VC_VAL_CMD_VDD_MPU_L
- */
-#define OMAP54XX_OFF_SHIFT							0
-#define OMAP54XX_OFF_WIDTH							0x8
-#define OMAP54XX_OFF_MASK							(0xff << 0)
-
-/*
- * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_MM_L,
- * PRM_VC_VAL_CMD_VDD_MPU_L
- */
-#define OMAP54XX_ON_SHIFT							24
-#define OMAP54XX_ON_WIDTH							0x8
-#define OMAP54XX_ON_MASK							(0xff << 24)
-
-/*
- * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_MM_L,
- * PRM_VC_VAL_CMD_VDD_MPU_L
- */
-#define OMAP54XX_ONLP_SHIFT							16
-#define OMAP54XX_ONLP_WIDTH							0x8
-#define OMAP54XX_ONLP_MASK							(0xff << 16)
-
-/* Used by PRM_ABBLDO_MM_CTRL, PRM_ABBLDO_MPU_CTRL */
-#define OMAP54XX_OPP_CHANGE_SHIFT						2
-#define OMAP54XX_OPP_CHANGE_WIDTH						0x1
-#define OMAP54XX_OPP_CHANGE_MASK						(1 << 2)
-
-/* Used by PRM_VC_VAL_BYPASS */
-#define OMAP54XX_OPP_CHANGE_EMIF_LVL_SHIFT					25
-#define OMAP54XX_OPP_CHANGE_EMIF_LVL_WIDTH					0x1
-#define OMAP54XX_OPP_CHANGE_EMIF_LVL_MASK					(1 << 25)
-
-/* Used by PRM_ABBLDO_MM_CTRL, PRM_ABBLDO_MPU_CTRL */
-#define OMAP54XX_OPP_SEL_SHIFT							0
-#define OMAP54XX_OPP_SEL_WIDTH							0x2
-#define OMAP54XX_OPP_SEL_MASK							(0x3 << 0)
-
-/* Used by PRM_DEBUG_OUT */
-#define OMAP54XX_OUTPUT_SHIFT							0
-#define OMAP54XX_OUTPUT_WIDTH							0x20
-#define OMAP54XX_OUTPUT_MASK							(0xffffffff << 0)
-
-/* Used by PRM_SRAM_COUNT */
-#define OMAP54XX_PCHARGECNT_VALUE_SHIFT						0
-#define OMAP54XX_PCHARGECNT_VALUE_WIDTH						0x6
-#define OMAP54XX_PCHARGECNT_VALUE_MASK						(0x3f << 0)
-
-/* Used by PRM_PSCON_COUNT */
-#define OMAP54XX_PCHARGE_TIME_SHIFT						0
-#define OMAP54XX_PCHARGE_TIME_WIDTH						0x8
-#define OMAP54XX_PCHARGE_TIME_MASK						(0xff << 0)
-
-/* Used by PM_ABE_PWRSTCTRL */
-#define OMAP54XX_PERIPHMEM_ONSTATE_SHIFT					20
-#define OMAP54XX_PERIPHMEM_ONSTATE_WIDTH					0x2
-#define OMAP54XX_PERIPHMEM_ONSTATE_MASK						(0x3 << 20)
-
-/* Used by PM_ABE_PWRSTCTRL */
-#define OMAP54XX_PERIPHMEM_RETSTATE_SHIFT					10
-#define OMAP54XX_PERIPHMEM_RETSTATE_WIDTH					0x1
-#define OMAP54XX_PERIPHMEM_RETSTATE_MASK					(1 << 10)
-
-/* Used by PM_ABE_PWRSTST */
-#define OMAP54XX_PERIPHMEM_STATEST_SHIFT					8
-#define OMAP54XX_PERIPHMEM_STATEST_WIDTH					0x2
-#define OMAP54XX_PERIPHMEM_STATEST_MASK						(0x3 << 8)
-
-/* Used by PRM_PHASE1_CNDP */
-#define OMAP54XX_PHASE1_CNDP_SHIFT						0
-#define OMAP54XX_PHASE1_CNDP_WIDTH						0x20
-#define OMAP54XX_PHASE1_CNDP_MASK						(0xffffffff << 0)
-
-/* Used by PRM_PHASE2A_CNDP */
-#define OMAP54XX_PHASE2A_CNDP_SHIFT						0
-#define OMAP54XX_PHASE2A_CNDP_WIDTH						0x20
-#define OMAP54XX_PHASE2A_CNDP_MASK						(0xffffffff << 0)
-
-/* Used by PRM_PHASE2B_CNDP */
-#define OMAP54XX_PHASE2B_CNDP_SHIFT						0
-#define OMAP54XX_PHASE2B_CNDP_WIDTH						0x20
-#define OMAP54XX_PHASE2B_CNDP_MASK						(0xffffffff << 0)
-
-/* Used by PRM_PSCON_COUNT */
-#define OMAP54XX_PONOUT_2_PGOODIN_TIME_SHIFT					8
-#define OMAP54XX_PONOUT_2_PGOODIN_TIME_WIDTH					0x8
-#define OMAP54XX_PONOUT_2_PGOODIN_TIME_MASK					(0xff << 8)
-
-/*
- * Used by PM_ABE_PWRSTCTRL, PM_CAM_PWRSTCTRL, PM_CORE_PWRSTCTRL,
- * PM_CUSTEFUSE_PWRSTCTRL, PM_DSP_PWRSTCTRL, PM_DSS_PWRSTCTRL,
- * PM_EMU_PWRSTCTRL, PM_GPU_PWRSTCTRL, PM_IVA_PWRSTCTRL, PM_L3INIT_PWRSTCTRL,
- * PM_MPU_PWRSTCTRL
- */
-#define OMAP54XX_POWERSTATE_SHIFT						0
-#define OMAP54XX_POWERSTATE_WIDTH						0x2
-#define OMAP54XX_POWERSTATE_MASK						(0x3 << 0)
-
-/*
- * Used by PM_ABE_PWRSTST, PM_CAM_PWRSTST, PM_CORE_PWRSTST,
- * PM_CUSTEFUSE_PWRSTST, PM_DSP_PWRSTST, PM_DSS_PWRSTST, PM_EMU_PWRSTST,
- * PM_GPU_PWRSTST, PM_IVA_PWRSTST, PM_L3INIT_PWRSTST, PM_MPU_PWRSTST
- */
-#define OMAP54XX_POWERSTATEST_SHIFT						0
-#define OMAP54XX_POWERSTATEST_WIDTH						0x2
-#define OMAP54XX_POWERSTATEST_MASK						(0x3 << 0)
-
-/* Used by PRM_PWRREQCTRL */
-#define OMAP54XX_PWRREQ_COND_SHIFT						0
-#define OMAP54XX_PWRREQ_COND_WIDTH						0x2
-#define OMAP54XX_PWRREQ_COND_MASK						(0x3 << 0)
-
-/* Used by PRM_VC_SMPS_CORE_CONFIG */
-#define OMAP54XX_RACEN_VDD_CORE_L_SHIFT						27
-#define OMAP54XX_RACEN_VDD_CORE_L_WIDTH						0x1
-#define OMAP54XX_RACEN_VDD_CORE_L_MASK						(1 << 27)
-
-/* Used by PRM_VC_SMPS_MM_CONFIG */
-#define OMAP54XX_RACEN_VDD_MM_L_SHIFT						27
-#define OMAP54XX_RACEN_VDD_MM_L_WIDTH						0x1
-#define OMAP54XX_RACEN_VDD_MM_L_MASK						(1 << 27)
-
-/* Used by PRM_VC_SMPS_MPU_CONFIG */
-#define OMAP54XX_RACEN_VDD_MPU_L_SHIFT						27
-#define OMAP54XX_RACEN_VDD_MPU_L_WIDTH						0x1
-#define OMAP54XX_RACEN_VDD_MPU_L_MASK						(1 << 27)
-
-/* Used by PRM_VC_SMPS_CORE_CONFIG */
-#define OMAP54XX_RAC_VDD_CORE_L_SHIFT						26
-#define OMAP54XX_RAC_VDD_CORE_L_WIDTH						0x1
-#define OMAP54XX_RAC_VDD_CORE_L_MASK						(1 << 26)
-
-/* Used by PRM_VC_SMPS_MM_CONFIG */
-#define OMAP54XX_RAC_VDD_MM_L_SHIFT						26
-#define OMAP54XX_RAC_VDD_MM_L_WIDTH						0x1
-#define OMAP54XX_RAC_VDD_MM_L_MASK						(1 << 26)
-
-/* Used by PRM_VC_SMPS_MPU_CONFIG */
-#define OMAP54XX_RAC_VDD_MPU_L_SHIFT						26
-#define OMAP54XX_RAC_VDD_MPU_L_WIDTH						0x1
-#define OMAP54XX_RAC_VDD_MPU_L_MASK						(1 << 26)
-
-/*
- * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
- * PRM_VOLTSETUP_MM_OFF, PRM_VOLTSETUP_MM_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
- * PRM_VOLTSETUP_MPU_RET_SLEEP
- */
-#define OMAP54XX_RAMP_DOWN_COUNT_SHIFT						16
-#define OMAP54XX_RAMP_DOWN_COUNT_WIDTH						0x6
-#define OMAP54XX_RAMP_DOWN_COUNT_MASK						(0x3f << 16)
-
-/*
- * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
- * PRM_VOLTSETUP_MM_OFF, PRM_VOLTSETUP_MM_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
- * PRM_VOLTSETUP_MPU_RET_SLEEP
- */
-#define OMAP54XX_RAMP_DOWN_PRESCAL_SHIFT					24
-#define OMAP54XX_RAMP_DOWN_PRESCAL_WIDTH					0x2
-#define OMAP54XX_RAMP_DOWN_PRESCAL_MASK						(0x3 << 24)
-
-/*
- * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
- * PRM_VOLTSETUP_MM_OFF, PRM_VOLTSETUP_MM_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
- * PRM_VOLTSETUP_MPU_RET_SLEEP
- */
-#define OMAP54XX_RAMP_UP_COUNT_SHIFT						0
-#define OMAP54XX_RAMP_UP_COUNT_WIDTH						0x6
-#define OMAP54XX_RAMP_UP_COUNT_MASK						(0x3f << 0)
-
-/*
- * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
- * PRM_VOLTSETUP_MM_OFF, PRM_VOLTSETUP_MM_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
- * PRM_VOLTSETUP_MPU_RET_SLEEP
- */
-#define OMAP54XX_RAMP_UP_PRESCAL_SHIFT						8
-#define OMAP54XX_RAMP_UP_PRESCAL_WIDTH						0x2
-#define OMAP54XX_RAMP_UP_PRESCAL_MASK						(0x3 << 8)
-
-/* Used by PRM_VC_SMPS_CORE_CONFIG */
-#define OMAP54XX_RAV_VDD_CORE_L_SHIFT						25
-#define OMAP54XX_RAV_VDD_CORE_L_WIDTH						0x1
-#define OMAP54XX_RAV_VDD_CORE_L_MASK						(1 << 25)
-
-/* Used by PRM_VC_SMPS_MM_CONFIG */
-#define OMAP54XX_RAV_VDD_MM_L_SHIFT						25
-#define OMAP54XX_RAV_VDD_MM_L_WIDTH						0x1
-#define OMAP54XX_RAV_VDD_MM_L_MASK						(1 << 25)
-
-/* Used by PRM_VC_SMPS_MPU_CONFIG */
-#define OMAP54XX_RAV_VDD_MPU_L_SHIFT						25
-#define OMAP54XX_RAV_VDD_MPU_L_WIDTH						0x1
-#define OMAP54XX_RAV_VDD_MPU_L_MASK						(1 << 25)
-
-/* Used by PRM_VC_VAL_BYPASS */
-#define OMAP54XX_REGADDR_SHIFT							8
-#define OMAP54XX_REGADDR_WIDTH							0x8
-#define OMAP54XX_REGADDR_MASK							(0xff << 8)
-
-/*
- * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_MM_L,
- * PRM_VC_VAL_CMD_VDD_MPU_L
- */
-#define OMAP54XX_RET_SHIFT							8
-#define OMAP54XX_RET_WIDTH							0x8
-#define OMAP54XX_RET_MASK							(0xff << 8)
-
-/* Used by PRM_SLDO_CORE_CTRL, PRM_SLDO_MM_CTRL, PRM_SLDO_MPU_CTRL */
-#define OMAP54XX_RETMODE_ENABLE_SHIFT						0
-#define OMAP54XX_RETMODE_ENABLE_WIDTH						0x1
-#define OMAP54XX_RETMODE_ENABLE_MASK						(1 << 0)
-
-/* Used by PRM_RSTTIME */
-#define OMAP54XX_RSTTIME1_SHIFT							0
-#define OMAP54XX_RSTTIME1_WIDTH							0xa
-#define OMAP54XX_RSTTIME1_MASK							(0x3ff << 0)
-
-/* Used by PRM_RSTTIME */
-#define OMAP54XX_RSTTIME2_SHIFT							10
-#define OMAP54XX_RSTTIME2_WIDTH							0x5
-#define OMAP54XX_RSTTIME2_MASK							(0x1f << 10)
-
-/* Used by RM_IPU_RSTCTRL, RM_IPU_RSTST */
-#define OMAP54XX_RST_CPU0_SHIFT							0
-#define OMAP54XX_RST_CPU0_WIDTH							0x1
-#define OMAP54XX_RST_CPU0_MASK							(1 << 0)
-
-/* Used by RM_IPU_RSTCTRL, RM_IPU_RSTST */
-#define OMAP54XX_RST_CPU1_SHIFT							1
-#define OMAP54XX_RST_CPU1_WIDTH							0x1
-#define OMAP54XX_RST_CPU1_MASK							(1 << 1)
-
-/* Used by RM_DSP_RSTCTRL, RM_DSP_RSTST */
-#define OMAP54XX_RST_DSP_SHIFT							0
-#define OMAP54XX_RST_DSP_WIDTH							0x1
-#define OMAP54XX_RST_DSP_MASK							(1 << 0)
-
-/* Used by RM_DSP_RSTST */
-#define OMAP54XX_RST_DSP_EMU_SHIFT						2
-#define OMAP54XX_RST_DSP_EMU_WIDTH						0x1
-#define OMAP54XX_RST_DSP_EMU_MASK						(1 << 2)
-
-/* Used by RM_DSP_RSTST */
-#define OMAP54XX_RST_DSP_EMU_REQ_SHIFT						3
-#define OMAP54XX_RST_DSP_EMU_REQ_WIDTH						0x1
-#define OMAP54XX_RST_DSP_EMU_REQ_MASK						(1 << 3)
-
-/* Used by RM_DSP_RSTCTRL, RM_DSP_RSTST */
-#define OMAP54XX_RST_DSP_MMU_CACHE_SHIFT					1
-#define OMAP54XX_RST_DSP_MMU_CACHE_WIDTH					0x1
-#define OMAP54XX_RST_DSP_MMU_CACHE_MASK						(1 << 1)
-
-/* Used by RM_IPU_RSTST */
-#define OMAP54XX_RST_EMULATION_CPU0_SHIFT					3
-#define OMAP54XX_RST_EMULATION_CPU0_WIDTH					0x1
-#define OMAP54XX_RST_EMULATION_CPU0_MASK					(1 << 3)
-
-/* Used by RM_IPU_RSTST */
-#define OMAP54XX_RST_EMULATION_CPU1_SHIFT					4
-#define OMAP54XX_RST_EMULATION_CPU1_WIDTH					0x1
-#define OMAP54XX_RST_EMULATION_CPU1_MASK					(1 << 4)
-
-/* Used by RM_IVA_RSTST */
-#define OMAP54XX_RST_EMULATION_SEQ1_SHIFT					3
-#define OMAP54XX_RST_EMULATION_SEQ1_WIDTH					0x1
-#define OMAP54XX_RST_EMULATION_SEQ1_MASK					(1 << 3)
-
-/* Used by RM_IVA_RSTST */
-#define OMAP54XX_RST_EMULATION_SEQ2_SHIFT					4
-#define OMAP54XX_RST_EMULATION_SEQ2_WIDTH					0x1
-#define OMAP54XX_RST_EMULATION_SEQ2_MASK					(1 << 4)
-
-/* Used by PRM_RSTCTRL */
-#define OMAP54XX_RST_GLOBAL_COLD_SW_SHIFT					1
-#define OMAP54XX_RST_GLOBAL_COLD_SW_WIDTH					0x1
-#define OMAP54XX_RST_GLOBAL_COLD_SW_MASK					(1 << 1)
-
-/* Used by PRM_RSTCTRL */
-#define OMAP54XX_RST_GLOBAL_WARM_SW_SHIFT					0
-#define OMAP54XX_RST_GLOBAL_WARM_SW_WIDTH					0x1
-#define OMAP54XX_RST_GLOBAL_WARM_SW_MASK					(1 << 0)
-
-/* Used by RM_IPU_RSTST */
-#define OMAP54XX_RST_ICECRUSHER_CPU0_SHIFT					5
-#define OMAP54XX_RST_ICECRUSHER_CPU0_WIDTH					0x1
-#define OMAP54XX_RST_ICECRUSHER_CPU0_MASK					(1 << 5)
-
-/* Used by RM_IPU_RSTST */
-#define OMAP54XX_RST_ICECRUSHER_CPU1_SHIFT					6
-#define OMAP54XX_RST_ICECRUSHER_CPU1_WIDTH					0x1
-#define OMAP54XX_RST_ICECRUSHER_CPU1_MASK					(1 << 6)
-
-/* Used by RM_IVA_RSTST */
-#define OMAP54XX_RST_ICECRUSHER_SEQ1_SHIFT					5
-#define OMAP54XX_RST_ICECRUSHER_SEQ1_WIDTH					0x1
-#define OMAP54XX_RST_ICECRUSHER_SEQ1_MASK					(1 << 5)
-
-/* Used by RM_IVA_RSTST */
-#define OMAP54XX_RST_ICECRUSHER_SEQ2_SHIFT					6
-#define OMAP54XX_RST_ICECRUSHER_SEQ2_WIDTH					0x1
-#define OMAP54XX_RST_ICECRUSHER_SEQ2_MASK					(1 << 6)
-
-/* Used by RM_IPU_RSTCTRL, RM_IPU_RSTST */
-#define OMAP54XX_RST_IPU_MMU_CACHE_SHIFT					2
-#define OMAP54XX_RST_IPU_MMU_CACHE_WIDTH					0x1
-#define OMAP54XX_RST_IPU_MMU_CACHE_MASK						(1 << 2)
-
-/* Used by RM_IVA_RSTCTRL, RM_IVA_RSTST */
-#define OMAP54XX_RST_LOGIC_SHIFT						2
-#define OMAP54XX_RST_LOGIC_WIDTH						0x1
-#define OMAP54XX_RST_LOGIC_MASK							(1 << 2)
-
-/* Used by RM_IVA_RSTCTRL, RM_IVA_RSTST */
-#define OMAP54XX_RST_SEQ1_SHIFT							0
-#define OMAP54XX_RST_SEQ1_WIDTH							0x1
-#define OMAP54XX_RST_SEQ1_MASK							(1 << 0)
-
-/* Used by RM_IVA_RSTCTRL, RM_IVA_RSTST */
-#define OMAP54XX_RST_SEQ2_SHIFT							1
-#define OMAP54XX_RST_SEQ2_WIDTH							0x1
-#define OMAP54XX_RST_SEQ2_MASK							(1 << 1)
-
-/* Used by REVISION_PRM */
-#define OMAP54XX_R_RTL_SHIFT							11
-#define OMAP54XX_R_RTL_WIDTH							0x5
-#define OMAP54XX_R_RTL_MASK							(0x1f << 11)
-
-/* Used by PRM_VC_SMPS_CORE_CONFIG */
-#define OMAP54XX_SA_VDD_CORE_L_SHIFT						0
-#define OMAP54XX_SA_VDD_CORE_L_WIDTH						0x7
-#define OMAP54XX_SA_VDD_CORE_L_MASK						(0x7f << 0)
-
-/* Used by PRM_VC_SMPS_MM_CONFIG */
-#define OMAP54XX_SA_VDD_MM_L_SHIFT						0
-#define OMAP54XX_SA_VDD_MM_L_WIDTH						0x7
-#define OMAP54XX_SA_VDD_MM_L_MASK						(0x7f << 0)
-
-/* Used by PRM_VC_SMPS_MPU_CONFIG */
-#define OMAP54XX_SA_VDD_MPU_L_SHIFT						0
-#define OMAP54XX_SA_VDD_MPU_L_WIDTH						0x7
-#define OMAP54XX_SA_VDD_MPU_L_MASK						(0x7f << 0)
-
-/* Used by REVISION_PRM */
-#define OMAP54XX_SCHEME_SHIFT							30
-#define OMAP54XX_SCHEME_WIDTH							0x2
-#define OMAP54XX_SCHEME_MASK							(0x3 << 30)
-
-/* Used by PRM_VC_CFG_I2C_CLK */
-#define OMAP54XX_SCLH_SHIFT							0
-#define OMAP54XX_SCLH_WIDTH							0x8
-#define OMAP54XX_SCLH_MASK							(0xff << 0)
-
-/* Used by PRM_VC_CFG_I2C_CLK */
-#define OMAP54XX_SCLL_SHIFT							8
-#define OMAP54XX_SCLL_WIDTH							0x8
-#define OMAP54XX_SCLL_MASK							(0xff << 8)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_SECURE_WDT_RST_SHIFT						4
-#define OMAP54XX_SECURE_WDT_RST_WIDTH						0x1
-#define OMAP54XX_SECURE_WDT_RST_MASK						(1 << 4)
-
-/* Used by PRM_VC_SMPS_CORE_CONFIG */
-#define OMAP54XX_SEL_SA_VDD_CORE_L_SHIFT					24
-#define OMAP54XX_SEL_SA_VDD_CORE_L_WIDTH					0x1
-#define OMAP54XX_SEL_SA_VDD_CORE_L_MASK						(1 << 24)
-
-/* Used by PRM_VC_SMPS_MM_CONFIG */
-#define OMAP54XX_SEL_SA_VDD_MM_L_SHIFT						24
-#define OMAP54XX_SEL_SA_VDD_MM_L_WIDTH						0x1
-#define OMAP54XX_SEL_SA_VDD_MM_L_MASK						(1 << 24)
-
-/* Used by PRM_VC_SMPS_MPU_CONFIG */
-#define OMAP54XX_SEL_SA_VDD_MPU_L_SHIFT						24
-#define OMAP54XX_SEL_SA_VDD_MPU_L_WIDTH						0x1
-#define OMAP54XX_SEL_SA_VDD_MPU_L_MASK						(1 << 24)
-
-/* Used by PM_IVA_PWRSTCTRL */
-#define OMAP54XX_SL2_MEM_ONSTATE_SHIFT						18
-#define OMAP54XX_SL2_MEM_ONSTATE_WIDTH						0x2
-#define OMAP54XX_SL2_MEM_ONSTATE_MASK						(0x3 << 18)
-
-/* Used by PM_IVA_PWRSTCTRL */
-#define OMAP54XX_SL2_MEM_RETSTATE_SHIFT						9
-#define OMAP54XX_SL2_MEM_RETSTATE_WIDTH						0x1
-#define OMAP54XX_SL2_MEM_RETSTATE_MASK						(1 << 9)
-
-/* Used by PM_IVA_PWRSTST */
-#define OMAP54XX_SL2_MEM_STATEST_SHIFT						6
-#define OMAP54XX_SL2_MEM_STATEST_WIDTH						0x2
-#define OMAP54XX_SL2_MEM_STATEST_MASK						(0x3 << 6)
-
-/* Used by PRM_VC_VAL_BYPASS */
-#define OMAP54XX_SLAVEADDR_SHIFT						0
-#define OMAP54XX_SLAVEADDR_WIDTH						0x7
-#define OMAP54XX_SLAVEADDR_MASK							(0x7f << 0)
-
-/* Used by PRM_SRAM_COUNT */
-#define OMAP54XX_SLPCNT_VALUE_SHIFT						16
-#define OMAP54XX_SLPCNT_VALUE_WIDTH						0x8
-#define OMAP54XX_SLPCNT_VALUE_MASK						(0xff << 16)
-
-/* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_MM_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */
-#define OMAP54XX_SMPSWAITTIMEMAX_SHIFT						8
-#define OMAP54XX_SMPSWAITTIMEMAX_WIDTH						0x10
-#define OMAP54XX_SMPSWAITTIMEMAX_MASK						(0xffff << 8)
-
-/* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_MM_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */
-#define OMAP54XX_SMPSWAITTIMEMIN_SHIFT						8
-#define OMAP54XX_SMPSWAITTIMEMIN_WIDTH						0x10
-#define OMAP54XX_SMPSWAITTIMEMIN_MASK						(0xffff << 8)
-
-/* Used by PRM_VC_CORE_ERRST */
-#define OMAP54XX_SMPS_RA_ERR_CORE_SHIFT						1
-#define OMAP54XX_SMPS_RA_ERR_CORE_WIDTH						0x1
-#define OMAP54XX_SMPS_RA_ERR_CORE_MASK						(1 << 1)
-
-/* Used by PRM_VC_MM_ERRST */
-#define OMAP54XX_SMPS_RA_ERR_MM_SHIFT						1
-#define OMAP54XX_SMPS_RA_ERR_MM_WIDTH						0x1
-#define OMAP54XX_SMPS_RA_ERR_MM_MASK						(1 << 1)
-
-/* Used by PRM_VC_MPU_ERRST */
-#define OMAP54XX_SMPS_RA_ERR_MPU_SHIFT						1
-#define OMAP54XX_SMPS_RA_ERR_MPU_WIDTH						0x1
-#define OMAP54XX_SMPS_RA_ERR_MPU_MASK						(1 << 1)
-
-/* Used by PRM_VC_CORE_ERRST */
-#define OMAP54XX_SMPS_SA_ERR_CORE_SHIFT						0
-#define OMAP54XX_SMPS_SA_ERR_CORE_WIDTH						0x1
-#define OMAP54XX_SMPS_SA_ERR_CORE_MASK						(1 << 0)
-
-/* Used by PRM_VC_MM_ERRST */
-#define OMAP54XX_SMPS_SA_ERR_MM_SHIFT						0
-#define OMAP54XX_SMPS_SA_ERR_MM_WIDTH						0x1
-#define OMAP54XX_SMPS_SA_ERR_MM_MASK						(1 << 0)
-
-/* Used by PRM_VC_MPU_ERRST */
-#define OMAP54XX_SMPS_SA_ERR_MPU_SHIFT						0
-#define OMAP54XX_SMPS_SA_ERR_MPU_WIDTH						0x1
-#define OMAP54XX_SMPS_SA_ERR_MPU_MASK						(1 << 0)
-
-/* Used by PRM_VC_CORE_ERRST */
-#define OMAP54XX_SMPS_TIMEOUT_ERR_CORE_SHIFT					2
-#define OMAP54XX_SMPS_TIMEOUT_ERR_CORE_WIDTH					0x1
-#define OMAP54XX_SMPS_TIMEOUT_ERR_CORE_MASK					(1 << 2)
-
-/* Used by PRM_VC_MM_ERRST */
-#define OMAP54XX_SMPS_TIMEOUT_ERR_MM_SHIFT					2
-#define OMAP54XX_SMPS_TIMEOUT_ERR_MM_WIDTH					0x1
-#define OMAP54XX_SMPS_TIMEOUT_ERR_MM_MASK					(1 << 2)
-
-/* Used by PRM_VC_MPU_ERRST */
-#define OMAP54XX_SMPS_TIMEOUT_ERR_MPU_SHIFT					2
-#define OMAP54XX_SMPS_TIMEOUT_ERR_MPU_WIDTH					0x1
-#define OMAP54XX_SMPS_TIMEOUT_ERR_MPU_MASK					(1 << 2)
-
-/* Used by PRM_ABBLDO_MM_SETUP, PRM_ABBLDO_MPU_SETUP */
-#define OMAP54XX_SR2EN_SHIFT							0
-#define OMAP54XX_SR2EN_WIDTH							0x1
-#define OMAP54XX_SR2EN_MASK							(1 << 0)
-
-/* Used by PRM_ABBLDO_MM_CTRL, PRM_ABBLDO_MPU_CTRL */
-#define OMAP54XX_SR2_IN_TRANSITION_SHIFT					6
-#define OMAP54XX_SR2_IN_TRANSITION_WIDTH					0x1
-#define OMAP54XX_SR2_IN_TRANSITION_MASK						(1 << 6)
-
-/* Used by PRM_ABBLDO_MM_CTRL, PRM_ABBLDO_MPU_CTRL */
-#define OMAP54XX_SR2_STATUS_SHIFT						3
-#define OMAP54XX_SR2_STATUS_WIDTH						0x2
-#define OMAP54XX_SR2_STATUS_MASK						(0x3 << 3)
-
-/* Used by PRM_ABBLDO_MM_SETUP, PRM_ABBLDO_MPU_SETUP */
-#define OMAP54XX_SR2_WTCNT_VALUE_SHIFT						8
-#define OMAP54XX_SR2_WTCNT_VALUE_WIDTH						0x8
-#define OMAP54XX_SR2_WTCNT_VALUE_MASK						(0xff << 8)
-
-/* Used by PRM_SLDO_CORE_CTRL, PRM_SLDO_MM_CTRL, PRM_SLDO_MPU_CTRL */
-#define OMAP54XX_SRAMLDO_STATUS_SHIFT						8
-#define OMAP54XX_SRAMLDO_STATUS_WIDTH						0x1
-#define OMAP54XX_SRAMLDO_STATUS_MASK						(1 << 8)
-
-/* Used by PRM_SLDO_CORE_CTRL, PRM_SLDO_MM_CTRL, PRM_SLDO_MPU_CTRL */
-#define OMAP54XX_SRAM_IN_TRANSITION_SHIFT					9
-#define OMAP54XX_SRAM_IN_TRANSITION_WIDTH					0x1
-#define OMAP54XX_SRAM_IN_TRANSITION_MASK					(1 << 9)
-
-/* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP54XX_SRMODEEN_SHIFT							4
-#define OMAP54XX_SRMODEEN_WIDTH							0x1
-#define OMAP54XX_SRMODEEN_MASK							(1 << 4)
-
-/* Used by PRM_VOLTSETUP_WARMRESET */
-#define OMAP54XX_STABLE_COUNT_SHIFT						0
-#define OMAP54XX_STABLE_COUNT_WIDTH						0x6
-#define OMAP54XX_STABLE_COUNT_MASK						(0x3f << 0)
-
-/* Used by PRM_VOLTSETUP_WARMRESET */
-#define OMAP54XX_STABLE_PRESCAL_SHIFT						8
-#define OMAP54XX_STABLE_PRESCAL_WIDTH						0x2
-#define OMAP54XX_STABLE_PRESCAL_MASK						(0x3 << 8)
-
-/* Used by PRM_BANDGAP_SETUP */
-#define OMAP54XX_STARTUP_COUNT_SHIFT						0
-#define OMAP54XX_STARTUP_COUNT_WIDTH						0x8
-#define OMAP54XX_STARTUP_COUNT_MASK						(0xff << 0)
-
-/* Renamed from STARTUP_COUNT Used by PRM_SRAM_COUNT */
-#define OMAP54XX_STARTUP_COUNT_24_31_SHIFT					24
-#define OMAP54XX_STARTUP_COUNT_24_31_WIDTH					0x8
-#define OMAP54XX_STARTUP_COUNT_24_31_MASK					(0xff << 24)
-
-/* Used by PM_IVA_PWRSTCTRL */
-#define OMAP54XX_TCM1_MEM_ONSTATE_SHIFT						20
-#define OMAP54XX_TCM1_MEM_ONSTATE_WIDTH						0x2
-#define OMAP54XX_TCM1_MEM_ONSTATE_MASK						(0x3 << 20)
-
-/* Used by PM_IVA_PWRSTCTRL */
-#define OMAP54XX_TCM1_MEM_RETSTATE_SHIFT					10
-#define OMAP54XX_TCM1_MEM_RETSTATE_WIDTH					0x1
-#define OMAP54XX_TCM1_MEM_RETSTATE_MASK						(1 << 10)
-
-/* Used by PM_IVA_PWRSTST */
-#define OMAP54XX_TCM1_MEM_STATEST_SHIFT						8
-#define OMAP54XX_TCM1_MEM_STATEST_WIDTH						0x2
-#define OMAP54XX_TCM1_MEM_STATEST_MASK						(0x3 << 8)
-
-/* Used by PM_IVA_PWRSTCTRL */
-#define OMAP54XX_TCM2_MEM_ONSTATE_SHIFT						22
-#define OMAP54XX_TCM2_MEM_ONSTATE_WIDTH						0x2
-#define OMAP54XX_TCM2_MEM_ONSTATE_MASK						(0x3 << 22)
-
-/* Used by PM_IVA_PWRSTCTRL */
-#define OMAP54XX_TCM2_MEM_RETSTATE_SHIFT					11
-#define OMAP54XX_TCM2_MEM_RETSTATE_WIDTH					0x1
-#define OMAP54XX_TCM2_MEM_RETSTATE_MASK						(1 << 11)
-
-/* Used by PM_IVA_PWRSTST */
-#define OMAP54XX_TCM2_MEM_STATEST_SHIFT						10
-#define OMAP54XX_TCM2_MEM_STATEST_WIDTH						0x2
-#define OMAP54XX_TCM2_MEM_STATEST_MASK						(0x3 << 10)
-
-/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_MM_VLIMITTO, PRM_VP_MPU_VLIMITTO */
-#define OMAP54XX_TIMEOUT_SHIFT							0
-#define OMAP54XX_TIMEOUT_WIDTH							0x10
-#define OMAP54XX_TIMEOUT_MASK							(0xffff << 0)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_MM_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP54XX_TIMEOUTEN_SHIFT						3
-#define OMAP54XX_TIMEOUTEN_WIDTH						0x1
-#define OMAP54XX_TIMEOUTEN_MASK							(1 << 3)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_TRANSITION_EN_SHIFT						8
-#define OMAP54XX_TRANSITION_EN_WIDTH						0x1
-#define OMAP54XX_TRANSITION_EN_MASK						(1 << 8)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_TRANSITION_ST_SHIFT						8
-#define OMAP54XX_TRANSITION_ST_WIDTH						0x1
-#define OMAP54XX_TRANSITION_ST_MASK						(1 << 8)
-
-/* Used by PRM_DEBUG_TRANS_CFG */
-#define OMAP54XX_TRIGGER_CLEAR_SHIFT						2
-#define OMAP54XX_TRIGGER_CLEAR_WIDTH						0x1
-#define OMAP54XX_TRIGGER_CLEAR_MASK						(1 << 2)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_TSHUT_CORE_RST_SHIFT						13
-#define OMAP54XX_TSHUT_CORE_RST_WIDTH						0x1
-#define OMAP54XX_TSHUT_CORE_RST_MASK						(1 << 13)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_TSHUT_MM_RST_SHIFT						12
-#define OMAP54XX_TSHUT_MM_RST_WIDTH						0x1
-#define OMAP54XX_TSHUT_MM_RST_MASK						(1 << 12)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_TSHUT_MPU_RST_SHIFT						11
-#define OMAP54XX_TSHUT_MPU_RST_WIDTH						0x1
-#define OMAP54XX_TSHUT_MPU_RST_MASK						(1 << 11)
-
-/* Used by PRM_VC_VAL_BYPASS */
-#define OMAP54XX_VALID_SHIFT							24
-#define OMAP54XX_VALID_WIDTH							0x1
-#define OMAP54XX_VALID_MASK							(1 << 24)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VC_BYPASSACK_EN_SHIFT						14
-#define OMAP54XX_VC_BYPASSACK_EN_WIDTH						0x1
-#define OMAP54XX_VC_BYPASSACK_EN_MASK						(1 << 14)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VC_BYPASSACK_ST_SHIFT						14
-#define OMAP54XX_VC_BYPASSACK_ST_WIDTH						0x1
-#define OMAP54XX_VC_BYPASSACK_ST_MASK						(1 << 14)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VC_CORE_VPACK_EN_SHIFT						22
-#define OMAP54XX_VC_CORE_VPACK_EN_WIDTH						0x1
-#define OMAP54XX_VC_CORE_VPACK_EN_MASK						(1 << 22)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VC_CORE_VPACK_ST_SHIFT						22
-#define OMAP54XX_VC_CORE_VPACK_ST_WIDTH						0x1
-#define OMAP54XX_VC_CORE_VPACK_ST_MASK						(1 << 22)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VC_MM_VPACK_EN_SHIFT						30
-#define OMAP54XX_VC_MM_VPACK_EN_WIDTH						0x1
-#define OMAP54XX_VC_MM_VPACK_EN_MASK						(1 << 30)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VC_MM_VPACK_ST_SHIFT						30
-#define OMAP54XX_VC_MM_VPACK_ST_WIDTH						0x1
-#define OMAP54XX_VC_MM_VPACK_ST_MASK						(1 << 30)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP54XX_VC_MPU_VPACK_EN_SHIFT						6
-#define OMAP54XX_VC_MPU_VPACK_EN_WIDTH						0x1
-#define OMAP54XX_VC_MPU_VPACK_EN_MASK						(1 << 6)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP54XX_VC_MPU_VPACK_ST_SHIFT						6
-#define OMAP54XX_VC_MPU_VPACK_ST_WIDTH						0x1
-#define OMAP54XX_VC_MPU_VPACK_ST_MASK						(1 << 6)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VC_RAERR_EN_SHIFT						12
-#define OMAP54XX_VC_RAERR_EN_WIDTH						0x1
-#define OMAP54XX_VC_RAERR_EN_MASK						(1 << 12)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VC_RAERR_ST_SHIFT						12
-#define OMAP54XX_VC_RAERR_ST_WIDTH						0x1
-#define OMAP54XX_VC_RAERR_ST_MASK						(1 << 12)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VC_SAERR_EN_SHIFT						11
-#define OMAP54XX_VC_SAERR_EN_WIDTH						0x1
-#define OMAP54XX_VC_SAERR_EN_MASK						(1 << 11)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VC_SAERR_ST_SHIFT						11
-#define OMAP54XX_VC_SAERR_ST_WIDTH						0x1
-#define OMAP54XX_VC_SAERR_ST_MASK						(1 << 11)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VC_TOERR_EN_SHIFT						13
-#define OMAP54XX_VC_TOERR_EN_WIDTH						0x1
-#define OMAP54XX_VC_TOERR_EN_MASK						(1 << 13)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VC_TOERR_ST_SHIFT						13
-#define OMAP54XX_VC_TOERR_ST_WIDTH						0x1
-#define OMAP54XX_VC_TOERR_ST_MASK						(1 << 13)
-
-/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_MM_VLIMITTO, PRM_VP_MPU_VLIMITTO */
-#define OMAP54XX_VDDMAX_SHIFT							24
-#define OMAP54XX_VDDMAX_WIDTH							0x8
-#define OMAP54XX_VDDMAX_MASK							(0xff << 24)
-
-/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_MM_VLIMITTO, PRM_VP_MPU_VLIMITTO */
-#define OMAP54XX_VDDMIN_SHIFT							16
-#define OMAP54XX_VDDMIN_WIDTH							0x8
-#define OMAP54XX_VDDMIN_MASK							(0xff << 16)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP54XX_VDD_CORE_I2C_DISABLE_SHIFT					12
-#define OMAP54XX_VDD_CORE_I2C_DISABLE_WIDTH					0x1
-#define OMAP54XX_VDD_CORE_I2C_DISABLE_MASK					(1 << 12)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_VDD_CORE_VOLT_MGR_RST_SHIFT					8
-#define OMAP54XX_VDD_CORE_VOLT_MGR_RST_WIDTH					0x1
-#define OMAP54XX_VDD_CORE_VOLT_MGR_RST_MASK					(1 << 8)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP54XX_VDD_MM_I2C_DISABLE_SHIFT					14
-#define OMAP54XX_VDD_MM_I2C_DISABLE_WIDTH					0x1
-#define OMAP54XX_VDD_MM_I2C_DISABLE_MASK					(1 << 14)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP54XX_VDD_MM_PRESENCE_SHIFT						9
-#define OMAP54XX_VDD_MM_PRESENCE_WIDTH						0x1
-#define OMAP54XX_VDD_MM_PRESENCE_MASK						(1 << 9)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_VDD_MM_VOLT_MGR_RST_SHIFT					7
-#define OMAP54XX_VDD_MM_VOLT_MGR_RST_WIDTH					0x1
-#define OMAP54XX_VDD_MM_VOLT_MGR_RST_MASK					(1 << 7)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP54XX_VDD_MPU_I2C_DISABLE_SHIFT					13
-#define OMAP54XX_VDD_MPU_I2C_DISABLE_WIDTH					0x1
-#define OMAP54XX_VDD_MPU_I2C_DISABLE_MASK					(1 << 13)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP54XX_VDD_MPU_PRESENCE_SHIFT						8
-#define OMAP54XX_VDD_MPU_PRESENCE_WIDTH						0x1
-#define OMAP54XX_VDD_MPU_PRESENCE_MASK						(1 << 8)
-
-/* Used by PRM_RSTST */
-#define OMAP54XX_VDD_MPU_VOLT_MGR_RST_SHIFT					6
-#define OMAP54XX_VDD_MPU_VOLT_MGR_RST_WIDTH					0x1
-#define OMAP54XX_VDD_MPU_VOLT_MGR_RST_MASK					(1 << 6)
-
-/* Used by PRM_VC_CORE_ERRST */
-#define OMAP54XX_VFSM_RA_ERR_CORE_SHIFT						4
-#define OMAP54XX_VFSM_RA_ERR_CORE_WIDTH						0x1
-#define OMAP54XX_VFSM_RA_ERR_CORE_MASK						(1 << 4)
-
-/* Used by PRM_VC_MM_ERRST */
-#define OMAP54XX_VFSM_RA_ERR_MM_SHIFT						4
-#define OMAP54XX_VFSM_RA_ERR_MM_WIDTH						0x1
-#define OMAP54XX_VFSM_RA_ERR_MM_MASK						(1 << 4)
-
-/* Used by PRM_VC_MPU_ERRST */
-#define OMAP54XX_VFSM_RA_ERR_MPU_SHIFT						4
-#define OMAP54XX_VFSM_RA_ERR_MPU_WIDTH						0x1
-#define OMAP54XX_VFSM_RA_ERR_MPU_MASK						(1 << 4)
-
-/* Used by PRM_VC_CORE_ERRST */
-#define OMAP54XX_VFSM_SA_ERR_CORE_SHIFT						3
-#define OMAP54XX_VFSM_SA_ERR_CORE_WIDTH						0x1
-#define OMAP54XX_VFSM_SA_ERR_CORE_MASK						(1 << 3)
-
-/* Used by PRM_VC_MM_ERRST */
-#define OMAP54XX_VFSM_SA_ERR_MM_SHIFT						3
-#define OMAP54XX_VFSM_SA_ERR_MM_WIDTH						0x1
-#define OMAP54XX_VFSM_SA_ERR_MM_MASK						(1 << 3)
-
-/* Used by PRM_VC_MPU_ERRST */
-#define OMAP54XX_VFSM_SA_ERR_MPU_SHIFT						3
-#define OMAP54XX_VFSM_SA_ERR_MPU_WIDTH						0x1
-#define OMAP54XX_VFSM_SA_ERR_MPU_MASK						(1 << 3)
-
-/* Used by PRM_VC_CORE_ERRST */
-#define OMAP54XX_VFSM_TIMEOUT_ERR_CORE_SHIFT					5
-#define OMAP54XX_VFSM_TIMEOUT_ERR_CORE_WIDTH					0x1
-#define OMAP54XX_VFSM_TIMEOUT_ERR_CORE_MASK					(1 << 5)
-
-/* Used by PRM_VC_MM_ERRST */
-#define OMAP54XX_VFSM_TIMEOUT_ERR_MM_SHIFT					5
-#define OMAP54XX_VFSM_TIMEOUT_ERR_MM_WIDTH					0x1
-#define OMAP54XX_VFSM_TIMEOUT_ERR_MM_MASK					(1 << 5)
-
-/* Used by PRM_VC_MPU_ERRST */
-#define OMAP54XX_VFSM_TIMEOUT_ERR_MPU_SHIFT					5
-#define OMAP54XX_VFSM_TIMEOUT_ERR_MPU_WIDTH					0x1
-#define OMAP54XX_VFSM_TIMEOUT_ERR_MPU_MASK					(1 << 5)
-
-/* Used by PRM_VC_SMPS_CORE_CONFIG */
-#define OMAP54XX_VOLRA_VDD_CORE_L_SHIFT						8
-#define OMAP54XX_VOLRA_VDD_CORE_L_WIDTH						0x8
-#define OMAP54XX_VOLRA_VDD_CORE_L_MASK						(0xff << 8)
-
-/* Used by PRM_VC_SMPS_MM_CONFIG */
-#define OMAP54XX_VOLRA_VDD_MM_L_SHIFT						8
-#define OMAP54XX_VOLRA_VDD_MM_L_WIDTH						0x8
-#define OMAP54XX_VOLRA_VDD_MM_L_MASK						(0xff << 8)
-
-/* Used by PRM_VC_SMPS_MPU_CONFIG */
-#define OMAP54XX_VOLRA_VDD_MPU_L_SHIFT						8
-#define OMAP54XX_VOLRA_VDD_MPU_L_WIDTH						0x8
-#define OMAP54XX_VOLRA_VDD_MPU_L_MASK						(0xff << 8)
-
-/* Used by PRM_VOLTST_MM, PRM_VOLTST_MPU */
-#define OMAP54XX_VOLTSTATEST_SHIFT						0
-#define OMAP54XX_VOLTSTATEST_WIDTH						0x2
-#define OMAP54XX_VOLTSTATEST_MASK						(0x3 << 0)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_MM_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP54XX_VPENABLE_SHIFT							0
-#define OMAP54XX_VPENABLE_WIDTH							0x1
-#define OMAP54XX_VPENABLE_MASK							(1 << 0)
-
-/* Used by PRM_VP_CORE_STATUS, PRM_VP_MM_STATUS, PRM_VP_MPU_STATUS */
-#define OMAP54XX_VPINIDLE_SHIFT							0
-#define OMAP54XX_VPINIDLE_WIDTH							0x1
-#define OMAP54XX_VPINIDLE_MASK							(1 << 0)
-
-/* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_MM_VOLTAGE, PRM_VP_MPU_VOLTAGE */
-#define OMAP54XX_VPVOLTAGE_SHIFT						0
-#define OMAP54XX_VPVOLTAGE_WIDTH						0x8
-#define OMAP54XX_VPVOLTAGE_MASK							(0xff << 0)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VP_CORE_EQVALUE_EN_SHIFT					20
-#define OMAP54XX_VP_CORE_EQVALUE_EN_WIDTH					0x1
-#define OMAP54XX_VP_CORE_EQVALUE_EN_MASK					(1 << 20)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VP_CORE_EQVALUE_ST_SHIFT					20
-#define OMAP54XX_VP_CORE_EQVALUE_ST_WIDTH					0x1
-#define OMAP54XX_VP_CORE_EQVALUE_ST_MASK					(1 << 20)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VP_CORE_MAXVDD_EN_SHIFT					18
-#define OMAP54XX_VP_CORE_MAXVDD_EN_WIDTH					0x1
-#define OMAP54XX_VP_CORE_MAXVDD_EN_MASK						(1 << 18)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VP_CORE_MAXVDD_ST_SHIFT					18
-#define OMAP54XX_VP_CORE_MAXVDD_ST_WIDTH					0x1
-#define OMAP54XX_VP_CORE_MAXVDD_ST_MASK						(1 << 18)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VP_CORE_MINVDD_EN_SHIFT					17
-#define OMAP54XX_VP_CORE_MINVDD_EN_WIDTH					0x1
-#define OMAP54XX_VP_CORE_MINVDD_EN_MASK						(1 << 17)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VP_CORE_MINVDD_ST_SHIFT					17
-#define OMAP54XX_VP_CORE_MINVDD_ST_WIDTH					0x1
-#define OMAP54XX_VP_CORE_MINVDD_ST_MASK						(1 << 17)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VP_CORE_NOSMPSACK_EN_SHIFT					19
-#define OMAP54XX_VP_CORE_NOSMPSACK_EN_WIDTH					0x1
-#define OMAP54XX_VP_CORE_NOSMPSACK_EN_MASK					(1 << 19)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VP_CORE_NOSMPSACK_ST_SHIFT					19
-#define OMAP54XX_VP_CORE_NOSMPSACK_ST_WIDTH					0x1
-#define OMAP54XX_VP_CORE_NOSMPSACK_ST_MASK					(1 << 19)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VP_CORE_OPPCHANGEDONE_EN_SHIFT					16
-#define OMAP54XX_VP_CORE_OPPCHANGEDONE_EN_WIDTH					0x1
-#define OMAP54XX_VP_CORE_OPPCHANGEDONE_EN_MASK					(1 << 16)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VP_CORE_OPPCHANGEDONE_ST_SHIFT					16
-#define OMAP54XX_VP_CORE_OPPCHANGEDONE_ST_WIDTH					0x1
-#define OMAP54XX_VP_CORE_OPPCHANGEDONE_ST_MASK					(1 << 16)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VP_CORE_TRANXDONE_EN_SHIFT					21
-#define OMAP54XX_VP_CORE_TRANXDONE_EN_WIDTH					0x1
-#define OMAP54XX_VP_CORE_TRANXDONE_EN_MASK					(1 << 21)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VP_CORE_TRANXDONE_ST_SHIFT					21
-#define OMAP54XX_VP_CORE_TRANXDONE_ST_WIDTH					0x1
-#define OMAP54XX_VP_CORE_TRANXDONE_ST_MASK					(1 << 21)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VP_MM_EQVALUE_EN_SHIFT						28
-#define OMAP54XX_VP_MM_EQVALUE_EN_WIDTH						0x1
-#define OMAP54XX_VP_MM_EQVALUE_EN_MASK						(1 << 28)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VP_MM_EQVALUE_ST_SHIFT						28
-#define OMAP54XX_VP_MM_EQVALUE_ST_WIDTH						0x1
-#define OMAP54XX_VP_MM_EQVALUE_ST_MASK						(1 << 28)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VP_MM_MAXVDD_EN_SHIFT						26
-#define OMAP54XX_VP_MM_MAXVDD_EN_WIDTH						0x1
-#define OMAP54XX_VP_MM_MAXVDD_EN_MASK						(1 << 26)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VP_MM_MAXVDD_ST_SHIFT						26
-#define OMAP54XX_VP_MM_MAXVDD_ST_WIDTH						0x1
-#define OMAP54XX_VP_MM_MAXVDD_ST_MASK						(1 << 26)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VP_MM_MINVDD_EN_SHIFT						25
-#define OMAP54XX_VP_MM_MINVDD_EN_WIDTH						0x1
-#define OMAP54XX_VP_MM_MINVDD_EN_MASK						(1 << 25)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VP_MM_MINVDD_ST_SHIFT						25
-#define OMAP54XX_VP_MM_MINVDD_ST_WIDTH						0x1
-#define OMAP54XX_VP_MM_MINVDD_ST_MASK						(1 << 25)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VP_MM_NOSMPSACK_EN_SHIFT					27
-#define OMAP54XX_VP_MM_NOSMPSACK_EN_WIDTH					0x1
-#define OMAP54XX_VP_MM_NOSMPSACK_EN_MASK					(1 << 27)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VP_MM_NOSMPSACK_ST_SHIFT					27
-#define OMAP54XX_VP_MM_NOSMPSACK_ST_WIDTH					0x1
-#define OMAP54XX_VP_MM_NOSMPSACK_ST_MASK					(1 << 27)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VP_MM_OPPCHANGEDONE_EN_SHIFT					24
-#define OMAP54XX_VP_MM_OPPCHANGEDONE_EN_WIDTH					0x1
-#define OMAP54XX_VP_MM_OPPCHANGEDONE_EN_MASK					(1 << 24)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VP_MM_OPPCHANGEDONE_ST_SHIFT					24
-#define OMAP54XX_VP_MM_OPPCHANGEDONE_ST_WIDTH					0x1
-#define OMAP54XX_VP_MM_OPPCHANGEDONE_ST_MASK					(1 << 24)
-
-/* Used by PRM_IRQENABLE_IPU, PRM_IRQENABLE_MPU */
-#define OMAP54XX_VP_MM_TRANXDONE_EN_SHIFT					29
-#define OMAP54XX_VP_MM_TRANXDONE_EN_WIDTH					0x1
-#define OMAP54XX_VP_MM_TRANXDONE_EN_MASK					(1 << 29)
-
-/* Used by PRM_IRQSTATUS_IPU, PRM_IRQSTATUS_MPU */
-#define OMAP54XX_VP_MM_TRANXDONE_ST_SHIFT					29
-#define OMAP54XX_VP_MM_TRANXDONE_ST_WIDTH					0x1
-#define OMAP54XX_VP_MM_TRANXDONE_ST_MASK					(1 << 29)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP54XX_VP_MPU_EQVALUE_EN_SHIFT					4
-#define OMAP54XX_VP_MPU_EQVALUE_EN_WIDTH					0x1
-#define OMAP54XX_VP_MPU_EQVALUE_EN_MASK						(1 << 4)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP54XX_VP_MPU_EQVALUE_ST_SHIFT					4
-#define OMAP54XX_VP_MPU_EQVALUE_ST_WIDTH					0x1
-#define OMAP54XX_VP_MPU_EQVALUE_ST_MASK						(1 << 4)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP54XX_VP_MPU_MAXVDD_EN_SHIFT						2
-#define OMAP54XX_VP_MPU_MAXVDD_EN_WIDTH						0x1
-#define OMAP54XX_VP_MPU_MAXVDD_EN_MASK						(1 << 2)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP54XX_VP_MPU_MAXVDD_ST_SHIFT						2
-#define OMAP54XX_VP_MPU_MAXVDD_ST_WIDTH						0x1
-#define OMAP54XX_VP_MPU_MAXVDD_ST_MASK						(1 << 2)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP54XX_VP_MPU_MINVDD_EN_SHIFT						1
-#define OMAP54XX_VP_MPU_MINVDD_EN_WIDTH						0x1
-#define OMAP54XX_VP_MPU_MINVDD_EN_MASK						(1 << 1)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP54XX_VP_MPU_MINVDD_ST_SHIFT						1
-#define OMAP54XX_VP_MPU_MINVDD_ST_WIDTH						0x1
-#define OMAP54XX_VP_MPU_MINVDD_ST_MASK						(1 << 1)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP54XX_VP_MPU_NOSMPSACK_EN_SHIFT					3
-#define OMAP54XX_VP_MPU_NOSMPSACK_EN_WIDTH					0x1
-#define OMAP54XX_VP_MPU_NOSMPSACK_EN_MASK					(1 << 3)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP54XX_VP_MPU_NOSMPSACK_ST_SHIFT					3
-#define OMAP54XX_VP_MPU_NOSMPSACK_ST_WIDTH					0x1
-#define OMAP54XX_VP_MPU_NOSMPSACK_ST_MASK					(1 << 3)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP54XX_VP_MPU_OPPCHANGEDONE_EN_SHIFT					0
-#define OMAP54XX_VP_MPU_OPPCHANGEDONE_EN_WIDTH					0x1
-#define OMAP54XX_VP_MPU_OPPCHANGEDONE_EN_MASK					(1 << 0)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP54XX_VP_MPU_OPPCHANGEDONE_ST_SHIFT					0
-#define OMAP54XX_VP_MPU_OPPCHANGEDONE_ST_WIDTH					0x1
-#define OMAP54XX_VP_MPU_OPPCHANGEDONE_ST_MASK					(1 << 0)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP54XX_VP_MPU_TRANXDONE_EN_SHIFT					5
-#define OMAP54XX_VP_MPU_TRANXDONE_EN_WIDTH					0x1
-#define OMAP54XX_VP_MPU_TRANXDONE_EN_MASK					(1 << 5)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP54XX_VP_MPU_TRANXDONE_ST_SHIFT					5
-#define OMAP54XX_VP_MPU_TRANXDONE_ST_WIDTH					0x1
-#define OMAP54XX_VP_MPU_TRANXDONE_ST_MASK					(1 << 5)
-
-/* Used by PRM_SRAM_COUNT */
-#define OMAP54XX_VSETUPCNT_VALUE_SHIFT						8
-#define OMAP54XX_VSETUPCNT_VALUE_WIDTH						0x8
-#define OMAP54XX_VSETUPCNT_VALUE_MASK						(0xff << 8)
-
-/* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_MM_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */
-#define OMAP54XX_VSTEPMAX_SHIFT							0
-#define OMAP54XX_VSTEPMAX_WIDTH							0x8
-#define OMAP54XX_VSTEPMAX_MASK							(0xff << 0)
-
-/* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_MM_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */
-#define OMAP54XX_VSTEPMIN_SHIFT							0
-#define OMAP54XX_VSTEPMIN_WIDTH							0x8
-#define OMAP54XX_VSTEPMIN_MASK							(0xff << 0)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DISPC_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_DISPC_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DISPC_DSP_MASK						(1 << 2)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DISPC_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_DISPC_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DISPC_IPU_MASK						(1 << 1)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DISPC_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_DISPC_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DISPC_MPU_MASK						(1 << 0)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DISPC_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_DISPC_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DISPC_SDMA_MASK					(1 << 3)
-
-/* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP54XX_WKUPDEP_DMIC_DMA_DSP_SHIFT					6
-#define OMAP54XX_WKUPDEP_DMIC_DMA_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DMIC_DMA_DSP_MASK					(1 << 6)
-
-/* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP54XX_WKUPDEP_DMIC_DMA_SDMA_SHIFT					7
-#define OMAP54XX_WKUPDEP_DMIC_DMA_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DMIC_DMA_SDMA_MASK					(1 << 7)
-
-/* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP54XX_WKUPDEP_DMIC_IRQ_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_DMIC_IRQ_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DMIC_IRQ_DSP_MASK					(1 << 2)
-
-/* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP54XX_WKUPDEP_DMIC_IRQ_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_DMIC_IRQ_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DMIC_IRQ_MPU_MASK					(1 << 0)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DSI1_A_DSP_SHIFT					6
-#define OMAP54XX_WKUPDEP_DSI1_A_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DSI1_A_DSP_MASK					(1 << 6)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DSI1_A_IPU_SHIFT					5
-#define OMAP54XX_WKUPDEP_DSI1_A_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DSI1_A_IPU_MASK					(1 << 5)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DSI1_A_MPU_SHIFT					4
-#define OMAP54XX_WKUPDEP_DSI1_A_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DSI1_A_MPU_MASK					(1 << 4)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DSI1_A_SDMA_SHIFT					7
-#define OMAP54XX_WKUPDEP_DSI1_A_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DSI1_A_SDMA_MASK					(1 << 7)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DSI1_B_DSP_SHIFT					10
-#define OMAP54XX_WKUPDEP_DSI1_B_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DSI1_B_DSP_MASK					(1 << 10)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DSI1_B_IPU_SHIFT					9
-#define OMAP54XX_WKUPDEP_DSI1_B_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DSI1_B_IPU_MASK					(1 << 9)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DSI1_B_MPU_SHIFT					8
-#define OMAP54XX_WKUPDEP_DSI1_B_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DSI1_B_MPU_MASK					(1 << 8)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DSI1_B_SDMA_SHIFT					11
-#define OMAP54XX_WKUPDEP_DSI1_B_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DSI1_B_SDMA_MASK					(1 << 11)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DSI1_C_DSP_SHIFT					17
-#define OMAP54XX_WKUPDEP_DSI1_C_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DSI1_C_DSP_MASK					(1 << 17)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DSI1_C_IPU_SHIFT					16
-#define OMAP54XX_WKUPDEP_DSI1_C_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DSI1_C_IPU_MASK					(1 << 16)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DSI1_C_MPU_SHIFT					15
-#define OMAP54XX_WKUPDEP_DSI1_C_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DSI1_C_MPU_MASK					(1 << 15)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_DSI1_C_SDMA_SHIFT					18
-#define OMAP54XX_WKUPDEP_DSI1_C_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_DSI1_C_SDMA_MASK					(1 << 18)
-
-/* Used by PM_WKUPAON_GPIO1_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO1_IRQ1_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_GPIO1_IRQ1_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO1_IRQ1_IPU_MASK					(1 << 1)
-
-/* Used by PM_WKUPAON_GPIO1_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO1_IRQ1_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_GPIO1_IRQ1_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO1_IRQ1_MPU_MASK					(1 << 0)
-
-/* Used by PM_WKUPAON_GPIO1_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO1_IRQ2_DSP_SHIFT					6
-#define OMAP54XX_WKUPDEP_GPIO1_IRQ2_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO1_IRQ2_DSP_MASK					(1 << 6)
-
-/* Used by PM_L4PER_GPIO2_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO2_IRQ1_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_GPIO2_IRQ1_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO2_IRQ1_IPU_MASK					(1 << 1)
-
-/* Used by PM_L4PER_GPIO2_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO2_IRQ1_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_GPIO2_IRQ1_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO2_IRQ1_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_GPIO2_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO2_IRQ2_DSP_SHIFT					6
-#define OMAP54XX_WKUPDEP_GPIO2_IRQ2_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO2_IRQ2_DSP_MASK					(1 << 6)
-
-/* Used by PM_L4PER_GPIO3_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO3_IRQ1_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_GPIO3_IRQ1_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO3_IRQ1_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_GPIO3_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO3_IRQ2_DSP_SHIFT					6
-#define OMAP54XX_WKUPDEP_GPIO3_IRQ2_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO3_IRQ2_DSP_MASK					(1 << 6)
-
-/* Used by PM_L4PER_GPIO4_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO4_IRQ1_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_GPIO4_IRQ1_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO4_IRQ1_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_GPIO4_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO4_IRQ2_DSP_SHIFT					6
-#define OMAP54XX_WKUPDEP_GPIO4_IRQ2_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO4_IRQ2_DSP_MASK					(1 << 6)
-
-/* Used by PM_L4PER_GPIO5_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO5_IRQ1_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_GPIO5_IRQ1_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO5_IRQ1_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_GPIO5_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO5_IRQ2_DSP_SHIFT					6
-#define OMAP54XX_WKUPDEP_GPIO5_IRQ2_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO5_IRQ2_DSP_MASK					(1 << 6)
-
-/* Used by PM_L4PER_GPIO6_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO6_IRQ1_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_GPIO6_IRQ1_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO6_IRQ1_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_GPIO6_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO6_IRQ2_DSP_SHIFT					6
-#define OMAP54XX_WKUPDEP_GPIO6_IRQ2_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO6_IRQ2_DSP_MASK					(1 << 6)
-
-/* Used by PM_L4PER_GPIO7_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO7_IRQ1_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_GPIO7_IRQ1_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO7_IRQ1_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_GPIO8_WKDEP */
-#define OMAP54XX_WKUPDEP_GPIO8_IRQ1_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_GPIO8_IRQ1_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_GPIO8_IRQ1_MPU_MASK					(1 << 0)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_HDMIDMA_SDMA_SHIFT					19
-#define OMAP54XX_WKUPDEP_HDMIDMA_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_HDMIDMA_SDMA_MASK					(1 << 19)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_HDMIIRQ_DSP_SHIFT					14
-#define OMAP54XX_WKUPDEP_HDMIIRQ_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_HDMIIRQ_DSP_MASK					(1 << 14)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_HDMIIRQ_IPU_SHIFT					13
-#define OMAP54XX_WKUPDEP_HDMIIRQ_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_HDMIIRQ_IPU_MASK					(1 << 13)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP54XX_WKUPDEP_HDMIIRQ_MPU_SHIFT					12
-#define OMAP54XX_WKUPDEP_HDMIIRQ_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_HDMIIRQ_MPU_MASK					(1 << 12)
-
-/* Used by PM_L3INIT_HSI_WKDEP */
-#define OMAP54XX_WKUPDEP_HSI_DSP_DSP_SHIFT					6
-#define OMAP54XX_WKUPDEP_HSI_DSP_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_HSI_DSP_DSP_MASK					(1 << 6)
-
-/* Used by PM_L3INIT_HSI_WKDEP */
-#define OMAP54XX_WKUPDEP_HSI_MCU_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_HSI_MCU_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_HSI_MCU_IPU_MASK					(1 << 1)
-
-/* Used by PM_L3INIT_HSI_WKDEP */
-#define OMAP54XX_WKUPDEP_HSI_MCU_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_HSI_MCU_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_HSI_MCU_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_I2C1_WKDEP */
-#define OMAP54XX_WKUPDEP_I2C1_DMA_SDMA_SHIFT					7
-#define OMAP54XX_WKUPDEP_I2C1_DMA_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_I2C1_DMA_SDMA_MASK					(1 << 7)
-
-/* Used by PM_L4PER_I2C1_WKDEP */
-#define OMAP54XX_WKUPDEP_I2C1_IRQ_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_I2C1_IRQ_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_I2C1_IRQ_IPU_MASK					(1 << 1)
-
-/* Used by PM_L4PER_I2C1_WKDEP */
-#define OMAP54XX_WKUPDEP_I2C1_IRQ_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_I2C1_IRQ_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_I2C1_IRQ_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_I2C2_WKDEP */
-#define OMAP54XX_WKUPDEP_I2C2_DMA_SDMA_SHIFT					7
-#define OMAP54XX_WKUPDEP_I2C2_DMA_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_I2C2_DMA_SDMA_MASK					(1 << 7)
-
-/* Used by PM_L4PER_I2C2_WKDEP */
-#define OMAP54XX_WKUPDEP_I2C2_IRQ_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_I2C2_IRQ_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_I2C2_IRQ_IPU_MASK					(1 << 1)
-
-/* Used by PM_L4PER_I2C2_WKDEP */
-#define OMAP54XX_WKUPDEP_I2C2_IRQ_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_I2C2_IRQ_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_I2C2_IRQ_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_I2C3_WKDEP */
-#define OMAP54XX_WKUPDEP_I2C3_DMA_SDMA_SHIFT					7
-#define OMAP54XX_WKUPDEP_I2C3_DMA_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_I2C3_DMA_SDMA_MASK					(1 << 7)
-
-/* Used by PM_L4PER_I2C3_WKDEP */
-#define OMAP54XX_WKUPDEP_I2C3_IRQ_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_I2C3_IRQ_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_I2C3_IRQ_IPU_MASK					(1 << 1)
-
-/* Used by PM_L4PER_I2C3_WKDEP */
-#define OMAP54XX_WKUPDEP_I2C3_IRQ_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_I2C3_IRQ_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_I2C3_IRQ_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_I2C4_WKDEP */
-#define OMAP54XX_WKUPDEP_I2C4_DMA_SDMA_SHIFT					7
-#define OMAP54XX_WKUPDEP_I2C4_DMA_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_I2C4_DMA_SDMA_MASK					(1 << 7)
-
-/* Used by PM_L4PER_I2C4_WKDEP */
-#define OMAP54XX_WKUPDEP_I2C4_IRQ_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_I2C4_IRQ_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_I2C4_IRQ_IPU_MASK					(1 << 1)
-
-/* Used by PM_L4PER_I2C4_WKDEP */
-#define OMAP54XX_WKUPDEP_I2C4_IRQ_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_I2C4_IRQ_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_I2C4_IRQ_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_I2C5_WKDEP */
-#define OMAP54XX_WKUPDEP_I2C5_IRQ_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_I2C5_IRQ_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_I2C5_IRQ_MPU_MASK					(1 << 0)
-
-/* Used by PM_WKUPAON_KBD_WKDEP */
-#define OMAP54XX_WKUPDEP_KBD_MPU_SHIFT						0
-#define OMAP54XX_WKUPDEP_KBD_MPU_WIDTH						0x1
-#define OMAP54XX_WKUPDEP_KBD_MPU_MASK						(1 << 0)
-
-/* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP54XX_WKUPDEP_MCASP_DMA_DSP_SHIFT					6
-#define OMAP54XX_WKUPDEP_MCASP_DMA_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCASP_DMA_DSP_MASK					(1 << 6)
-
-/* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP54XX_WKUPDEP_MCASP_DMA_SDMA_SHIFT					7
-#define OMAP54XX_WKUPDEP_MCASP_DMA_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCASP_DMA_SDMA_MASK					(1 << 7)
-
-/* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP54XX_WKUPDEP_MCASP_IRQ_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_MCASP_IRQ_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCASP_IRQ_DSP_MASK					(1 << 2)
-
-/* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP54XX_WKUPDEP_MCASP_IRQ_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_MCASP_IRQ_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCASP_IRQ_MPU_MASK					(1 << 0)
-
-/* Used by PM_ABE_MCBSP1_WKDEP */
-#define OMAP54XX_WKUPDEP_MCBSP1_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_MCBSP1_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCBSP1_DSP_MASK					(1 << 2)
-
-/* Used by PM_ABE_MCBSP1_WKDEP */
-#define OMAP54XX_WKUPDEP_MCBSP1_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_MCBSP1_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCBSP1_MPU_MASK					(1 << 0)
-
-/* Used by PM_ABE_MCBSP1_WKDEP */
-#define OMAP54XX_WKUPDEP_MCBSP1_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_MCBSP1_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCBSP1_SDMA_MASK					(1 << 3)
-
-/* Used by PM_ABE_MCBSP2_WKDEP */
-#define OMAP54XX_WKUPDEP_MCBSP2_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_MCBSP2_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCBSP2_DSP_MASK					(1 << 2)
-
-/* Used by PM_ABE_MCBSP2_WKDEP */
-#define OMAP54XX_WKUPDEP_MCBSP2_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_MCBSP2_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCBSP2_MPU_MASK					(1 << 0)
-
-/* Used by PM_ABE_MCBSP2_WKDEP */
-#define OMAP54XX_WKUPDEP_MCBSP2_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_MCBSP2_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCBSP2_SDMA_MASK					(1 << 3)
-
-/* Used by PM_ABE_MCBSP3_WKDEP */
-#define OMAP54XX_WKUPDEP_MCBSP3_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_MCBSP3_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCBSP3_DSP_MASK					(1 << 2)
-
-/* Used by PM_ABE_MCBSP3_WKDEP */
-#define OMAP54XX_WKUPDEP_MCBSP3_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_MCBSP3_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCBSP3_MPU_MASK					(1 << 0)
-
-/* Used by PM_ABE_MCBSP3_WKDEP */
-#define OMAP54XX_WKUPDEP_MCBSP3_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_MCBSP3_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCBSP3_SDMA_MASK					(1 << 3)
-
-/* Used by PM_ABE_MCPDM_WKDEP */
-#define OMAP54XX_WKUPDEP_MCPDM_DMA_DSP_SHIFT					6
-#define OMAP54XX_WKUPDEP_MCPDM_DMA_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCPDM_DMA_DSP_MASK					(1 << 6)
-
-/* Used by PM_ABE_MCPDM_WKDEP */
-#define OMAP54XX_WKUPDEP_MCPDM_DMA_SDMA_SHIFT					7
-#define OMAP54XX_WKUPDEP_MCPDM_DMA_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCPDM_DMA_SDMA_MASK					(1 << 7)
-
-/* Used by PM_ABE_MCPDM_WKDEP */
-#define OMAP54XX_WKUPDEP_MCPDM_IRQ_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_MCPDM_IRQ_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCPDM_IRQ_DSP_MASK					(1 << 2)
-
-/* Used by PM_ABE_MCPDM_WKDEP */
-#define OMAP54XX_WKUPDEP_MCPDM_IRQ_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_MCPDM_IRQ_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCPDM_IRQ_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP54XX_WKUPDEP_MCSPI1_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_MCSPI1_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCSPI1_DSP_MASK					(1 << 2)
-
-/* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP54XX_WKUPDEP_MCSPI1_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_MCSPI1_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCSPI1_IPU_MASK					(1 << 1)
-
-/* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP54XX_WKUPDEP_MCSPI1_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_MCSPI1_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCSPI1_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP54XX_WKUPDEP_MCSPI1_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_MCSPI1_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCSPI1_SDMA_MASK					(1 << 3)
-
-/* Used by PM_L4PER_MCSPI2_WKDEP */
-#define OMAP54XX_WKUPDEP_MCSPI2_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_MCSPI2_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCSPI2_IPU_MASK					(1 << 1)
-
-/* Used by PM_L4PER_MCSPI2_WKDEP */
-#define OMAP54XX_WKUPDEP_MCSPI2_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_MCSPI2_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCSPI2_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_MCSPI2_WKDEP */
-#define OMAP54XX_WKUPDEP_MCSPI2_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_MCSPI2_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCSPI2_SDMA_MASK					(1 << 3)
-
-/* Used by PM_L4PER_MCSPI3_WKDEP */
-#define OMAP54XX_WKUPDEP_MCSPI3_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_MCSPI3_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCSPI3_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_MCSPI3_WKDEP */
-#define OMAP54XX_WKUPDEP_MCSPI3_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_MCSPI3_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCSPI3_SDMA_MASK					(1 << 3)
-
-/* Used by PM_L4PER_MCSPI4_WKDEP */
-#define OMAP54XX_WKUPDEP_MCSPI4_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_MCSPI4_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCSPI4_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_MCSPI4_WKDEP */
-#define OMAP54XX_WKUPDEP_MCSPI4_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_MCSPI4_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MCSPI4_SDMA_MASK					(1 << 3)
-
-/* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC1_DSP_SHIFT						2
-#define OMAP54XX_WKUPDEP_MMC1_DSP_WIDTH						0x1
-#define OMAP54XX_WKUPDEP_MMC1_DSP_MASK						(1 << 2)
-
-/* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC1_IPU_SHIFT						1
-#define OMAP54XX_WKUPDEP_MMC1_IPU_WIDTH						0x1
-#define OMAP54XX_WKUPDEP_MMC1_IPU_MASK						(1 << 1)
-
-/* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC1_MPU_SHIFT						0
-#define OMAP54XX_WKUPDEP_MMC1_MPU_WIDTH						0x1
-#define OMAP54XX_WKUPDEP_MMC1_MPU_MASK						(1 << 0)
-
-/* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC1_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_MMC1_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MMC1_SDMA_MASK						(1 << 3)
-
-/* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC2_DSP_SHIFT						2
-#define OMAP54XX_WKUPDEP_MMC2_DSP_WIDTH						0x1
-#define OMAP54XX_WKUPDEP_MMC2_DSP_MASK						(1 << 2)
-
-/* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC2_IPU_SHIFT						1
-#define OMAP54XX_WKUPDEP_MMC2_IPU_WIDTH						0x1
-#define OMAP54XX_WKUPDEP_MMC2_IPU_MASK						(1 << 1)
-
-/* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC2_MPU_SHIFT						0
-#define OMAP54XX_WKUPDEP_MMC2_MPU_WIDTH						0x1
-#define OMAP54XX_WKUPDEP_MMC2_MPU_MASK						(1 << 0)
-
-/* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC2_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_MMC2_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MMC2_SDMA_MASK						(1 << 3)
-
-/* Used by PM_L4PER_MMC3_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC3_IPU_SHIFT						1
-#define OMAP54XX_WKUPDEP_MMC3_IPU_WIDTH						0x1
-#define OMAP54XX_WKUPDEP_MMC3_IPU_MASK						(1 << 1)
-
-/* Used by PM_L4PER_MMC3_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC3_MPU_SHIFT						0
-#define OMAP54XX_WKUPDEP_MMC3_MPU_WIDTH						0x1
-#define OMAP54XX_WKUPDEP_MMC3_MPU_MASK						(1 << 0)
-
-/* Used by PM_L4PER_MMC3_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC3_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_MMC3_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MMC3_SDMA_MASK						(1 << 3)
-
-/* Used by PM_L4PER_MMC4_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC4_MPU_SHIFT						0
-#define OMAP54XX_WKUPDEP_MMC4_MPU_WIDTH						0x1
-#define OMAP54XX_WKUPDEP_MMC4_MPU_MASK						(1 << 0)
-
-/* Used by PM_L4PER_MMC4_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC4_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_MMC4_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MMC4_SDMA_MASK						(1 << 3)
-
-/* Used by PM_L4PER_MMC5_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC5_MPU_SHIFT						0
-#define OMAP54XX_WKUPDEP_MMC5_MPU_WIDTH						0x1
-#define OMAP54XX_WKUPDEP_MMC5_MPU_MASK						(1 << 0)
-
-/* Used by PM_L4PER_MMC5_WKDEP */
-#define OMAP54XX_WKUPDEP_MMC5_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_MMC5_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_MMC5_SDMA_MASK						(1 << 3)
-
-/* Used by PM_L3INIT_SATA_WKDEP */
-#define OMAP54XX_WKUPDEP_SATA_MPU_SHIFT						0
-#define OMAP54XX_WKUPDEP_SATA_MPU_WIDTH						0x1
-#define OMAP54XX_WKUPDEP_SATA_MPU_MASK						(1 << 0)
-
-/* Used by PM_ABE_SLIMBUS1_WKDEP */
-#define OMAP54XX_WKUPDEP_SLIMBUS1_DMA_DSP_SHIFT					6
-#define OMAP54XX_WKUPDEP_SLIMBUS1_DMA_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_SLIMBUS1_DMA_DSP_MASK					(1 << 6)
-
-/* Used by PM_ABE_SLIMBUS1_WKDEP */
-#define OMAP54XX_WKUPDEP_SLIMBUS1_DMA_SDMA_SHIFT				7
-#define OMAP54XX_WKUPDEP_SLIMBUS1_DMA_SDMA_WIDTH				0x1
-#define OMAP54XX_WKUPDEP_SLIMBUS1_DMA_SDMA_MASK					(1 << 7)
-
-/* Used by PM_ABE_SLIMBUS1_WKDEP */
-#define OMAP54XX_WKUPDEP_SLIMBUS1_IRQ_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_SLIMBUS1_IRQ_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_SLIMBUS1_IRQ_DSP_MASK					(1 << 2)
-
-/* Used by PM_ABE_SLIMBUS1_WKDEP */
-#define OMAP54XX_WKUPDEP_SLIMBUS1_IRQ_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_SLIMBUS1_IRQ_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_SLIMBUS1_IRQ_MPU_MASK					(1 << 0)
-
-/* Used by PM_COREAON_SMARTREFLEX_CORE_WKDEP */
-#define OMAP54XX_WKUPDEP_SMARTREFLEX_CORE_IPU_SHIFT				1
-#define OMAP54XX_WKUPDEP_SMARTREFLEX_CORE_IPU_WIDTH				0x1
-#define OMAP54XX_WKUPDEP_SMARTREFLEX_CORE_IPU_MASK				(1 << 1)
-
-/* Used by PM_COREAON_SMARTREFLEX_CORE_WKDEP */
-#define OMAP54XX_WKUPDEP_SMARTREFLEX_CORE_MPU_SHIFT				0
-#define OMAP54XX_WKUPDEP_SMARTREFLEX_CORE_MPU_WIDTH				0x1
-#define OMAP54XX_WKUPDEP_SMARTREFLEX_CORE_MPU_MASK				(1 << 0)
-
-/* Used by PM_COREAON_SMARTREFLEX_MM_WKDEP */
-#define OMAP54XX_WKUPDEP_SMARTREFLEX_MM_MPU_SHIFT				0
-#define OMAP54XX_WKUPDEP_SMARTREFLEX_MM_MPU_WIDTH				0x1
-#define OMAP54XX_WKUPDEP_SMARTREFLEX_MM_MPU_MASK				(1 << 0)
-
-/* Used by PM_COREAON_SMARTREFLEX_MPU_WKDEP */
-#define OMAP54XX_WKUPDEP_SMARTREFLEX_MPU_MPU_SHIFT				0
-#define OMAP54XX_WKUPDEP_SMARTREFLEX_MPU_MPU_WIDTH				0x1
-#define OMAP54XX_WKUPDEP_SMARTREFLEX_MPU_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_TIMER10_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER10_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_TIMER10_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER10_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_TIMER11_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER11_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_TIMER11_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER11_IPU_MASK					(1 << 1)
-
-/* Used by PM_L4PER_TIMER11_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER11_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_TIMER11_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER11_MPU_MASK					(1 << 0)
-
-/* Used by PM_WKUPAON_TIMER12_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER12_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_TIMER12_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER12_MPU_MASK					(1 << 0)
-
-/* Used by PM_WKUPAON_TIMER1_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER1_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_TIMER1_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER1_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_TIMER2_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER2_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_TIMER2_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER2_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_TIMER3_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER3_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_TIMER3_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER3_IPU_MASK					(1 << 1)
-
-/* Used by PM_L4PER_TIMER3_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER3_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_TIMER3_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER3_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_TIMER4_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER4_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_TIMER4_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER4_IPU_MASK					(1 << 1)
-
-/* Used by PM_L4PER_TIMER4_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER4_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_TIMER4_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER4_MPU_MASK					(1 << 0)
-
-/* Used by PM_ABE_TIMER5_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER5_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_TIMER5_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER5_DSP_MASK					(1 << 2)
-
-/* Used by PM_ABE_TIMER5_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER5_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_TIMER5_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER5_MPU_MASK					(1 << 0)
-
-/* Used by PM_ABE_TIMER6_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER6_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_TIMER6_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER6_DSP_MASK					(1 << 2)
-
-/* Used by PM_ABE_TIMER6_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER6_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_TIMER6_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER6_MPU_MASK					(1 << 0)
-
-/* Used by PM_ABE_TIMER7_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER7_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_TIMER7_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER7_DSP_MASK					(1 << 2)
-
-/* Used by PM_ABE_TIMER7_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER7_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_TIMER7_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER7_MPU_MASK					(1 << 0)
-
-/* Used by PM_ABE_TIMER8_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER8_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_TIMER8_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER8_DSP_MASK					(1 << 2)
-
-/* Used by PM_ABE_TIMER8_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER8_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_TIMER8_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER8_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_TIMER9_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER9_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_TIMER9_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER9_IPU_MASK					(1 << 1)
-
-/* Used by PM_L4PER_TIMER9_WKDEP */
-#define OMAP54XX_WKUPDEP_TIMER9_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_TIMER9_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_TIMER9_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_UART1_WKDEP */
-#define OMAP54XX_WKUPDEP_UART1_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_UART1_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART1_MPU_MASK						(1 << 0)
-
-/* Used by PM_L4PER_UART1_WKDEP */
-#define OMAP54XX_WKUPDEP_UART1_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_UART1_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART1_SDMA_MASK					(1 << 3)
-
-/* Used by PM_L4PER_UART2_WKDEP */
-#define OMAP54XX_WKUPDEP_UART2_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_UART2_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART2_MPU_MASK						(1 << 0)
-
-/* Used by PM_L4PER_UART2_WKDEP */
-#define OMAP54XX_WKUPDEP_UART2_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_UART2_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART2_SDMA_MASK					(1 << 3)
-
-/* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP54XX_WKUPDEP_UART3_DSP_SHIFT					2
-#define OMAP54XX_WKUPDEP_UART3_DSP_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART3_DSP_MASK						(1 << 2)
-
-/* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP54XX_WKUPDEP_UART3_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_UART3_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART3_IPU_MASK						(1 << 1)
-
-/* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP54XX_WKUPDEP_UART3_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_UART3_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART3_MPU_MASK						(1 << 0)
-
-/* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP54XX_WKUPDEP_UART3_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_UART3_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART3_SDMA_MASK					(1 << 3)
-
-/* Used by PM_L4PER_UART4_WKDEP */
-#define OMAP54XX_WKUPDEP_UART4_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_UART4_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART4_MPU_MASK						(1 << 0)
-
-/* Used by PM_L4PER_UART4_WKDEP */
-#define OMAP54XX_WKUPDEP_UART4_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_UART4_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART4_SDMA_MASK					(1 << 3)
-
-/* Used by PM_L4PER_UART5_WKDEP */
-#define OMAP54XX_WKUPDEP_UART5_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_UART5_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART5_MPU_MASK						(1 << 0)
-
-/* Used by PM_L4PER_UART5_WKDEP */
-#define OMAP54XX_WKUPDEP_UART5_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_UART5_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART5_SDMA_MASK					(1 << 3)
-
-/* Used by PM_L4PER_UART6_WKDEP */
-#define OMAP54XX_WKUPDEP_UART6_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_UART6_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART6_MPU_MASK						(1 << 0)
-
-/* Used by PM_L4PER_UART6_WKDEP */
-#define OMAP54XX_WKUPDEP_UART6_SDMA_SHIFT					3
-#define OMAP54XX_WKUPDEP_UART6_SDMA_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UART6_SDMA_MASK					(1 << 3)
-
-/* Used by PM_L3INIT_UNIPRO2_WKDEP */
-#define OMAP54XX_WKUPDEP_UNIPRO2_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_UNIPRO2_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_UNIPRO2_MPU_MASK					(1 << 0)
-
-/* Used by PM_L3INIT_USB_HOST_HS_WKDEP */
-#define OMAP54XX_WKUPDEP_USB_HOST_HS_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_USB_HOST_HS_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_USB_HOST_HS_IPU_MASK					(1 << 1)
-
-/* Used by PM_L3INIT_USB_HOST_HS_WKDEP */
-#define OMAP54XX_WKUPDEP_USB_HOST_HS_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_USB_HOST_HS_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_USB_HOST_HS_MPU_MASK					(1 << 0)
-
-/* Used by PM_L3INIT_USB_OTG_SS_WKDEP */
-#define OMAP54XX_WKUPDEP_USB_OTG_SS_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_USB_OTG_SS_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_USB_OTG_SS_IPU_MASK					(1 << 1)
-
-/* Used by PM_L3INIT_USB_OTG_SS_WKDEP */
-#define OMAP54XX_WKUPDEP_USB_OTG_SS_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_USB_OTG_SS_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_USB_OTG_SS_MPU_MASK					(1 << 0)
-
-/* Used by PM_L3INIT_USB_TLL_HS_WKDEP */
-#define OMAP54XX_WKUPDEP_USB_TLL_HS_IPU_SHIFT					1
-#define OMAP54XX_WKUPDEP_USB_TLL_HS_IPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_USB_TLL_HS_IPU_MASK					(1 << 1)
-
-/* Used by PM_L3INIT_USB_TLL_HS_WKDEP */
-#define OMAP54XX_WKUPDEP_USB_TLL_HS_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_USB_TLL_HS_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_USB_TLL_HS_MPU_MASK					(1 << 0)
-
-/* Used by PM_WKUPAON_WD_TIMER2_WKDEP */
-#define OMAP54XX_WKUPDEP_WD_TIMER2_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_WD_TIMER2_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_WD_TIMER2_MPU_MASK					(1 << 0)
-
-/* Used by PM_ABE_WD_TIMER3_WKDEP */
-#define OMAP54XX_WKUPDEP_WD_TIMER3_MPU_SHIFT					0
-#define OMAP54XX_WKUPDEP_WD_TIMER3_MPU_WIDTH					0x1
-#define OMAP54XX_WKUPDEP_WD_TIMER3_MPU_MASK					(1 << 0)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP54XX_WUCLK_CTRL_SHIFT						8
-#define OMAP54XX_WUCLK_CTRL_WIDTH						0x1
-#define OMAP54XX_WUCLK_CTRL_MASK						(1 << 8)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP54XX_WUCLK_STATUS_SHIFT						9
-#define OMAP54XX_WUCLK_STATUS_WIDTH						0x1
-#define OMAP54XX_WUCLK_STATUS_MASK						(1 << 9)
-
-/* Used by REVISION_PRM */
-#define OMAP54XX_X_MAJOR_SHIFT							8
-#define OMAP54XX_X_MAJOR_WIDTH							0x3
-#define OMAP54XX_X_MAJOR_MASK							(0x7 << 8)
-
-/* Used by REVISION_PRM */
-#define OMAP54XX_Y_MINOR_SHIFT							0
-#define OMAP54XX_Y_MINOR_WIDTH							0x6
-#define OMAP54XX_Y_MINOR_MASK							(0x3f << 0)
-#endif
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
index 277f717..f8eb833 100644
--- a/arch/arm/mach-omap2/prm3xxx.h
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -144,7 +144,13 @@ extern u32 omap3_prm_vcvp_read(u8 offset);
 extern void omap3_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
-extern void omap3xxx_prm_reconfigure_io_chain(void);
+#ifdef CONFIG_ARCH_OMAP3
+void omap3xxx_prm_reconfigure_io_chain(void);
+#else
+static inline void omap3xxx_prm_reconfigure_io_chain(void)
+{
+}
+#endif
 
 /* PRM interrupt-related functions */
 extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 415c7e0..03a6034 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -620,6 +620,15 @@ static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm)
 	return 0;
 }
 
+static int omap4_check_vcvp(void)
+{
+	/* No VC/VP on dra7xx devices */
+	if (soc_is_dra7xx())
+		return 0;
+
+	return 1;
+}
+
 struct pwrdm_ops omap4_pwrdm_operations = {
 	.pwrdm_set_next_pwrst	= omap4_pwrdm_set_next_pwrst,
 	.pwrdm_read_next_pwrst	= omap4_pwrdm_read_next_pwrst,
@@ -637,6 +646,7 @@ struct pwrdm_ops omap4_pwrdm_operations = {
 	.pwrdm_set_mem_onst	= omap4_pwrdm_set_mem_onst,
 	.pwrdm_set_mem_retst	= omap4_pwrdm_set_mem_retst,
 	.pwrdm_wait_transition	= omap4_pwrdm_wait_transition,
+	.pwrdm_has_voltdm	= omap4_check_vcvp,
 };
 
 /*
@@ -650,7 +660,7 @@ static struct prm_ll_data omap44xx_prm_ll_data = {
 
 int __init omap44xx_prm_init(void)
 {
-	if (!cpu_is_omap44xx() && !soc_is_omap54xx())
+	if (!cpu_is_omap44xx() && !soc_is_omap54xx() && !soc_is_dra7xx())
 		return 0;
 
 	return prm_register(&omap44xx_prm_ll_data);
diff --git a/arch/arm/mach-omap2/prm44xx_54xx.h b/arch/arm/mach-omap2/prm44xx_54xx.h
index 7cd22ab..a085d9c 100644
--- a/arch/arm/mach-omap2/prm44xx_54xx.h
+++ b/arch/arm/mach-omap2/prm44xx_54xx.h
@@ -42,7 +42,13 @@ extern u32 omap4_prm_vcvp_read(u8 offset);
 extern void omap4_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
-extern void omap44xx_prm_reconfigure_io_chain(void);
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
+void omap44xx_prm_reconfigure_io_chain(void);
+#else
+static inline void omap44xx_prm_reconfigure_io_chain(void)
+{
+}
+#endif
 
 /* PRM interrupt-related functions */
 extern void omap44xx_prm_read_pending_irqs(unsigned long *events);
diff --git a/arch/arm/mach-omap2/prm7xx.h b/arch/arm/mach-omap2/prm7xx.h
new file mode 100644
index 0000000..d92a840
--- /dev/null
+++ b/arch/arm/mach-omap2/prm7xx.h
@@ -0,0 +1,678 @@
+/*
+ * DRA7xx PRM instance offset macros
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Generated by code originally written by:
+ * Paul Walmsley (paul@pwsan.com)
+ * Rajendra Nayak (rnayak@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM7XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM7XX_H
+
+#include "prm44xx_54xx.h"
+#include "prcm-common.h"
+#include "prm.h"
+
+#define DRA7XX_PRM_BASE		0x4ae06000
+
+#define DRA7XX_PRM_REGADDR(inst, reg)				\
+	OMAP2_L4_IO_ADDRESS(DRA7XX_PRM_BASE + (inst) + (reg))
+
+
+/* PRM instances */
+#define DRA7XX_PRM_OCP_SOCKET_INST	0x0000
+#define DRA7XX_PRM_CKGEN_INST		0x0100
+#define DRA7XX_PRM_MPU_INST		0x0300
+#define DRA7XX_PRM_DSP1_INST		0x0400
+#define DRA7XX_PRM_IPU_INST		0x0500
+#define DRA7XX_PRM_COREAON_INST		0x0628
+#define DRA7XX_PRM_CORE_INST		0x0700
+#define DRA7XX_PRM_IVA_INST		0x0f00
+#define DRA7XX_PRM_CAM_INST		0x1000
+#define DRA7XX_PRM_DSS_INST		0x1100
+#define DRA7XX_PRM_GPU_INST		0x1200
+#define DRA7XX_PRM_L3INIT_INST		0x1300
+#define DRA7XX_PRM_L4PER_INST		0x1400
+#define DRA7XX_PRM_CUSTEFUSE_INST	0x1600
+#define DRA7XX_PRM_WKUPAON_INST		0x1724
+#define DRA7XX_PRM_WKUPAON_CM_INST	0x1800
+#define DRA7XX_PRM_EMU_INST		0x1900
+#define DRA7XX_PRM_EMU_CM_INST		0x1a00
+#define DRA7XX_PRM_DSP2_INST		0x1b00
+#define DRA7XX_PRM_EVE1_INST		0x1b40
+#define DRA7XX_PRM_EVE2_INST		0x1b80
+#define DRA7XX_PRM_EVE3_INST		0x1bc0
+#define DRA7XX_PRM_EVE4_INST		0x1c00
+#define DRA7XX_PRM_RTC_INST		0x1c60
+#define DRA7XX_PRM_VPE_INST		0x1c80
+#define DRA7XX_PRM_DEVICE_INST		0x1d00
+#define DRA7XX_PRM_INSTR_INST		0x1f00
+
+/* PRM clockdomain register offsets (from instance start) */
+#define DRA7XX_PRM_WKUPAON_CM_WKUPAON_CDOFFS	0x0000
+#define DRA7XX_PRM_EMU_CM_EMU_CDOFFS		0x0000
+
+/* PRM */
+
+/* PRM.OCP_SOCKET_PRM register offsets */
+#define DRA7XX_REVISION_PRM_OFFSET				0x0000
+#define DRA7XX_PRM_IRQSTATUS_MPU_OFFSET				0x0010
+#define DRA7XX_PRM_IRQSTATUS_MPU_2_OFFSET			0x0014
+#define DRA7XX_PRM_IRQENABLE_MPU_OFFSET				0x0018
+#define DRA7XX_PRM_IRQENABLE_MPU_2_OFFSET			0x001c
+#define DRA7XX_PRM_IRQSTATUS_IPU2_OFFSET			0x0020
+#define DRA7XX_PRM_IRQENABLE_IPU2_OFFSET			0x0028
+#define DRA7XX_PRM_IRQSTATUS_DSP1_OFFSET			0x0030
+#define DRA7XX_PRM_IRQENABLE_DSP1_OFFSET			0x0038
+#define DRA7XX_CM_PRM_PROFILING_CLKCTRL_OFFSET			0x0040
+#define DRA7XX_CM_PRM_PROFILING_CLKCTRL				DRA7XX_PRM_REGADDR(DRA7XX_PRM_OCP_SOCKET_INST, 0x0040)
+#define DRA7XX_PRM_IRQENABLE_DSP2_OFFSET			0x0044
+#define DRA7XX_PRM_IRQENABLE_EVE1_OFFSET			0x0048
+#define DRA7XX_PRM_IRQENABLE_EVE2_OFFSET			0x004c
+#define DRA7XX_PRM_IRQENABLE_EVE3_OFFSET			0x0050
+#define DRA7XX_PRM_IRQENABLE_EVE4_OFFSET			0x0054
+#define DRA7XX_PRM_IRQENABLE_IPU1_OFFSET			0x0058
+#define DRA7XX_PRM_IRQSTATUS_DSP2_OFFSET			0x005c
+#define DRA7XX_PRM_IRQSTATUS_EVE1_OFFSET			0x0060
+#define DRA7XX_PRM_IRQSTATUS_EVE2_OFFSET			0x0064
+#define DRA7XX_PRM_IRQSTATUS_EVE3_OFFSET			0x0068
+#define DRA7XX_PRM_IRQSTATUS_EVE4_OFFSET			0x006c
+#define DRA7XX_PRM_IRQSTATUS_IPU1_OFFSET			0x0070
+#define DRA7XX_PRM_DEBUG_CFG1_OFFSET				0x00e4
+#define DRA7XX_PRM_DEBUG_CFG2_OFFSET				0x00e8
+#define DRA7XX_PRM_DEBUG_CFG3_OFFSET				0x00ec
+#define DRA7XX_PRM_DEBUG_OUT_OFFSET				0x00f4
+
+/* PRM.CKGEN_PRM register offsets */
+#define DRA7XX_CM_CLKSEL_SYSCLK1_OFFSET				0x0000
+#define DRA7XX_CM_CLKSEL_SYSCLK1				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0000)
+#define DRA7XX_CM_CLKSEL_WKUPAON_OFFSET				0x0008
+#define DRA7XX_CM_CLKSEL_WKUPAON				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0008)
+#define DRA7XX_CM_CLKSEL_ABE_PLL_REF_OFFSET			0x000c
+#define DRA7XX_CM_CLKSEL_ABE_PLL_REF				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x000c)
+#define DRA7XX_CM_CLKSEL_SYS_OFFSET				0x0010
+#define DRA7XX_CM_CLKSEL_SYS					DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0010)
+#define DRA7XX_CM_CLKSEL_ABE_PLL_BYPAS_OFFSET			0x0014
+#define DRA7XX_CM_CLKSEL_ABE_PLL_BYPAS				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0014)
+#define DRA7XX_CM_CLKSEL_ABE_PLL_SYS_OFFSET			0x0018
+#define DRA7XX_CM_CLKSEL_ABE_PLL_SYS				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0018)
+#define DRA7XX_CM_CLKSEL_ABE_24M_OFFSET				0x001c
+#define DRA7XX_CM_CLKSEL_ABE_24M				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x001c)
+#define DRA7XX_CM_CLKSEL_ABE_SYS_OFFSET				0x0020
+#define DRA7XX_CM_CLKSEL_ABE_SYS				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0020)
+#define DRA7XX_CM_CLKSEL_HDMI_MCASP_AUX_OFFSET			0x0024
+#define DRA7XX_CM_CLKSEL_HDMI_MCASP_AUX				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0024)
+#define DRA7XX_CM_CLKSEL_HDMI_TIMER_OFFSET			0x0028
+#define DRA7XX_CM_CLKSEL_HDMI_TIMER				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0028)
+#define DRA7XX_CM_CLKSEL_MCASP_SYS_OFFSET			0x002c
+#define DRA7XX_CM_CLKSEL_MCASP_SYS				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x002c)
+#define DRA7XX_CM_CLKSEL_MLBP_MCASP_OFFSET			0x0030
+#define DRA7XX_CM_CLKSEL_MLBP_MCASP				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0030)
+#define DRA7XX_CM_CLKSEL_MLB_MCASP_OFFSET			0x0034
+#define DRA7XX_CM_CLKSEL_MLB_MCASP				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0034)
+#define DRA7XX_CM_CLKSEL_PER_ABE_X1_GFCLK_MCASP_AUX_OFFSET	0x0038
+#define DRA7XX_CM_CLKSEL_PER_ABE_X1_GFCLK_MCASP_AUX		DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0038)
+#define DRA7XX_CM_CLKSEL_SYS_CLK1_32K_OFFSET			0x0040
+#define DRA7XX_CM_CLKSEL_SYS_CLK1_32K				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0040)
+#define DRA7XX_CM_CLKSEL_TIMER_SYS_OFFSET			0x0044
+#define DRA7XX_CM_CLKSEL_TIMER_SYS				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0044)
+#define DRA7XX_CM_CLKSEL_VIDEO1_MCASP_AUX_OFFSET		0x0048
+#define DRA7XX_CM_CLKSEL_VIDEO1_MCASP_AUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0048)
+#define DRA7XX_CM_CLKSEL_VIDEO1_TIMER_OFFSET			0x004c
+#define DRA7XX_CM_CLKSEL_VIDEO1_TIMER				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x004c)
+#define DRA7XX_CM_CLKSEL_VIDEO2_MCASP_AUX_OFFSET		0x0050
+#define DRA7XX_CM_CLKSEL_VIDEO2_MCASP_AUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0050)
+#define DRA7XX_CM_CLKSEL_VIDEO2_TIMER_OFFSET			0x0054
+#define DRA7XX_CM_CLKSEL_VIDEO2_TIMER				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0054)
+#define DRA7XX_CM_CLKSEL_CLKOUTMUX0_OFFSET			0x0058
+#define DRA7XX_CM_CLKSEL_CLKOUTMUX0				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0058)
+#define DRA7XX_CM_CLKSEL_CLKOUTMUX1_OFFSET			0x005c
+#define DRA7XX_CM_CLKSEL_CLKOUTMUX1				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x005c)
+#define DRA7XX_CM_CLKSEL_CLKOUTMUX2_OFFSET			0x0060
+#define DRA7XX_CM_CLKSEL_CLKOUTMUX2				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0060)
+#define DRA7XX_CM_CLKSEL_HDMI_PLL_SYS_OFFSET			0x0064
+#define DRA7XX_CM_CLKSEL_HDMI_PLL_SYS				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0064)
+#define DRA7XX_CM_CLKSEL_VIDEO1_PLL_SYS_OFFSET			0x0068
+#define DRA7XX_CM_CLKSEL_VIDEO1_PLL_SYS				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0068)
+#define DRA7XX_CM_CLKSEL_VIDEO2_PLL_SYS_OFFSET			0x006c
+#define DRA7XX_CM_CLKSEL_VIDEO2_PLL_SYS				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x006c)
+#define DRA7XX_CM_CLKSEL_ABE_CLK_DIV_OFFSET			0x0070
+#define DRA7XX_CM_CLKSEL_ABE_CLK_DIV				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0070)
+#define DRA7XX_CM_CLKSEL_ABE_GICLK_DIV_OFFSET			0x0074
+#define DRA7XX_CM_CLKSEL_ABE_GICLK_DIV				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0074)
+#define DRA7XX_CM_CLKSEL_AESS_FCLK_DIV_OFFSET			0x0078
+#define DRA7XX_CM_CLKSEL_AESS_FCLK_DIV				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0078)
+#define DRA7XX_CM_CLKSEL_EVE_CLK_OFFSET				0x0080
+#define DRA7XX_CM_CLKSEL_EVE_CLK				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0080)
+#define DRA7XX_CM_CLKSEL_USB_OTG_CLK_CLKOUTMUX_OFFSET		0x0084
+#define DRA7XX_CM_CLKSEL_USB_OTG_CLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0084)
+#define DRA7XX_CM_CLKSEL_CORE_DPLL_OUT_CLK_CLKOUTMUX_OFFSET	0x0088
+#define DRA7XX_CM_CLKSEL_CORE_DPLL_OUT_CLK_CLKOUTMUX		DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0088)
+#define DRA7XX_CM_CLKSEL_DSP_GFCLK_CLKOUTMUX_OFFSET		0x008c
+#define DRA7XX_CM_CLKSEL_DSP_GFCLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x008c)
+#define DRA7XX_CM_CLKSEL_EMIF_PHY_GCLK_CLKOUTMUX_OFFSET		0x0090
+#define DRA7XX_CM_CLKSEL_EMIF_PHY_GCLK_CLKOUTMUX		DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0090)
+#define DRA7XX_CM_CLKSEL_EMU_CLK_CLKOUTMUX_OFFSET		0x0094
+#define DRA7XX_CM_CLKSEL_EMU_CLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0094)
+#define DRA7XX_CM_CLKSEL_FUNC_96M_AON_CLK_CLKOUTMUX_OFFSET	0x0098
+#define DRA7XX_CM_CLKSEL_FUNC_96M_AON_CLK_CLKOUTMUX		DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0098)
+#define DRA7XX_CM_CLKSEL_GMAC_250M_CLK_CLKOUTMUX_OFFSET		0x009c
+#define DRA7XX_CM_CLKSEL_GMAC_250M_CLK_CLKOUTMUX		DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x009c)
+#define DRA7XX_CM_CLKSEL_GPU_GCLK_CLKOUTMUX_OFFSET		0x00a0
+#define DRA7XX_CM_CLKSEL_GPU_GCLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00a0)
+#define DRA7XX_CM_CLKSEL_HDMI_CLK_CLKOUTMUX_OFFSET		0x00a4
+#define DRA7XX_CM_CLKSEL_HDMI_CLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00a4)
+#define DRA7XX_CM_CLKSEL_IVA_GCLK_CLKOUTMUX_OFFSET		0x00a8
+#define DRA7XX_CM_CLKSEL_IVA_GCLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00a8)
+#define DRA7XX_CM_CLKSEL_L3INIT_480M_GFCLK_CLKOUTMUX_OFFSET	0x00ac
+#define DRA7XX_CM_CLKSEL_L3INIT_480M_GFCLK_CLKOUTMUX		DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00ac)
+#define DRA7XX_CM_CLKSEL_MPU_GCLK_CLKOUTMUX_OFFSET		0x00b0
+#define DRA7XX_CM_CLKSEL_MPU_GCLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00b0)
+#define DRA7XX_CM_CLKSEL_PCIE1_CLK_CLKOUTMUX_OFFSET		0x00b4
+#define DRA7XX_CM_CLKSEL_PCIE1_CLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00b4)
+#define DRA7XX_CM_CLKSEL_PCIE2_CLK_CLKOUTMUX_OFFSET		0x00b8
+#define DRA7XX_CM_CLKSEL_PCIE2_CLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00b8)
+#define DRA7XX_CM_CLKSEL_PER_ABE_X1_CLK_CLKOUTMUX_OFFSET	0x00bc
+#define DRA7XX_CM_CLKSEL_PER_ABE_X1_CLK_CLKOUTMUX		DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00bc)
+#define DRA7XX_CM_CLKSEL_SATA_CLK_CLKOUTMUX_OFFSET		0x00c0
+#define DRA7XX_CM_CLKSEL_SATA_CLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00c0)
+#define DRA7XX_CM_CLKSEL_SECURE_32K_CLK_CLKOUTMUX_OFFSET	0x00c4
+#define DRA7XX_CM_CLKSEL_SECURE_32K_CLK_CLKOUTMUX		DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00c4)
+#define DRA7XX_CM_CLKSEL_SYS_CLK1_CLKOUTMUX_OFFSET		0x00c8
+#define DRA7XX_CM_CLKSEL_SYS_CLK1_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00c8)
+#define DRA7XX_CM_CLKSEL_SYS_CLK2_CLKOUTMUX_OFFSET		0x00cc
+#define DRA7XX_CM_CLKSEL_SYS_CLK2_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00cc)
+#define DRA7XX_CM_CLKSEL_VIDEO1_CLK_CLKOUTMUX_OFFSET		0x00d0
+#define DRA7XX_CM_CLKSEL_VIDEO1_CLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00d0)
+#define DRA7XX_CM_CLKSEL_VIDEO2_CLK_CLKOUTMUX_OFFSET		0x00d4
+#define DRA7XX_CM_CLKSEL_VIDEO2_CLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00d4)
+#define DRA7XX_CM_CLKSEL_ABE_LP_CLK_OFFSET			0x00d8
+#define DRA7XX_CM_CLKSEL_ABE_LP_CLK				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00d8)
+#define DRA7XX_CM_CLKSEL_ADC_GFCLK_OFFSET			0x00dc
+#define DRA7XX_CM_CLKSEL_ADC_GFCLK				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00dc)
+#define DRA7XX_CM_CLKSEL_EVE_GFCLK_CLKOUTMUX_OFFSET		0x00e0
+#define DRA7XX_CM_CLKSEL_EVE_GFCLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00e0)
+
+/* PRM.MPU_PRM register offsets */
+#define DRA7XX_PM_MPU_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_MPU_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_MPU_MPU_CONTEXT_OFFSET			0x0024
+
+/* PRM.DSP1_PRM register offsets */
+#define DRA7XX_PM_DSP1_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_DSP1_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_DSP1_RSTCTRL_OFFSET				0x0010
+#define DRA7XX_RM_DSP1_RSTST_OFFSET				0x0014
+#define DRA7XX_RM_DSP1_DSP1_CONTEXT_OFFSET			0x0024
+
+/* PRM.IPU_PRM register offsets */
+#define DRA7XX_PM_IPU_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_IPU_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_IPU1_RSTCTRL_OFFSET				0x0010
+#define DRA7XX_RM_IPU1_RSTST_OFFSET				0x0014
+#define DRA7XX_RM_IPU1_IPU1_CONTEXT_OFFSET			0x0024
+#define DRA7XX_PM_IPU_MCASP1_WKDEP_OFFSET			0x0050
+#define DRA7XX_RM_IPU_MCASP1_CONTEXT_OFFSET			0x0054
+#define DRA7XX_PM_IPU_TIMER5_WKDEP_OFFSET			0x0058
+#define DRA7XX_RM_IPU_TIMER5_CONTEXT_OFFSET			0x005c
+#define DRA7XX_PM_IPU_TIMER6_WKDEP_OFFSET			0x0060
+#define DRA7XX_RM_IPU_TIMER6_CONTEXT_OFFSET			0x0064
+#define DRA7XX_PM_IPU_TIMER7_WKDEP_OFFSET			0x0068
+#define DRA7XX_RM_IPU_TIMER7_CONTEXT_OFFSET			0x006c
+#define DRA7XX_PM_IPU_TIMER8_WKDEP_OFFSET			0x0070
+#define DRA7XX_RM_IPU_TIMER8_CONTEXT_OFFSET			0x0074
+#define DRA7XX_PM_IPU_I2C5_WKDEP_OFFSET				0x0078
+#define DRA7XX_RM_IPU_I2C5_CONTEXT_OFFSET			0x007c
+#define DRA7XX_PM_IPU_UART6_WKDEP_OFFSET			0x0080
+#define DRA7XX_RM_IPU_UART6_CONTEXT_OFFSET			0x0084
+
+/* PRM.COREAON_PRM register offsets */
+#define DRA7XX_PM_COREAON_SMARTREFLEX_MPU_WKDEP_OFFSET		0x0000
+#define DRA7XX_RM_COREAON_SMARTREFLEX_MPU_CONTEXT_OFFSET	0x0004
+#define DRA7XX_PM_COREAON_SMARTREFLEX_CORE_WKDEP_OFFSET		0x0010
+#define DRA7XX_RM_COREAON_SMARTREFLEX_CORE_CONTEXT_OFFSET	0x0014
+#define DRA7XX_PM_COREAON_SMARTREFLEX_GPU_WKDEP_OFFSET		0x0030
+#define DRA7XX_RM_COREAON_SMARTREFLEX_GPU_CONTEXT_OFFSET	0x0034
+#define DRA7XX_PM_COREAON_SMARTREFLEX_DSPEVE_WKDEP_OFFSET	0x0040
+#define DRA7XX_RM_COREAON_SMARTREFLEX_DSPEVE_CONTEXT_OFFSET	0x0044
+#define DRA7XX_PM_COREAON_SMARTREFLEX_IVAHD_WKDEP_OFFSET	0x0050
+#define DRA7XX_RM_COREAON_SMARTREFLEX_IVAHD_CONTEXT_OFFSET	0x0054
+#define DRA7XX_RM_COREAON_DUMMY_MODULE1_CONTEXT_OFFSET		0x0084
+#define DRA7XX_RM_COREAON_DUMMY_MODULE2_CONTEXT_OFFSET		0x0094
+#define DRA7XX_RM_COREAON_DUMMY_MODULE3_CONTEXT_OFFSET		0x00a4
+#define DRA7XX_RM_COREAON_DUMMY_MODULE4_CONTEXT_OFFSET		0x00b4
+
+/* PRM.CORE_PRM register offsets */
+#define DRA7XX_PM_CORE_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_CORE_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_L3MAIN1_L3_MAIN_1_CONTEXT_OFFSET		0x0024
+#define DRA7XX_RM_L3MAIN1_GPMC_CONTEXT_OFFSET			0x002c
+#define DRA7XX_RM_L3MAIN1_MMU_EDMA_CONTEXT_OFFSET		0x0034
+#define DRA7XX_PM_L3MAIN1_OCMC_RAM1_WKDEP_OFFSET		0x0050
+#define DRA7XX_RM_L3MAIN1_OCMC_RAM1_CONTEXT_OFFSET		0x0054
+#define DRA7XX_PM_L3MAIN1_OCMC_RAM2_WKDEP_OFFSET		0x0058
+#define DRA7XX_RM_L3MAIN1_OCMC_RAM2_CONTEXT_OFFSET		0x005c
+#define DRA7XX_PM_L3MAIN1_OCMC_RAM3_WKDEP_OFFSET		0x0060
+#define DRA7XX_RM_L3MAIN1_OCMC_RAM3_CONTEXT_OFFSET		0x0064
+#define DRA7XX_RM_L3MAIN1_OCMC_ROM_CONTEXT_OFFSET		0x006c
+#define DRA7XX_PM_L3MAIN1_TPCC_WKDEP_OFFSET			0x0070
+#define DRA7XX_RM_L3MAIN1_TPCC_CONTEXT_OFFSET			0x0074
+#define DRA7XX_PM_L3MAIN1_TPTC1_WKDEP_OFFSET			0x0078
+#define DRA7XX_RM_L3MAIN1_TPTC1_CONTEXT_OFFSET			0x007c
+#define DRA7XX_PM_L3MAIN1_TPTC2_WKDEP_OFFSET			0x0080
+#define DRA7XX_RM_L3MAIN1_TPTC2_CONTEXT_OFFSET			0x0084
+#define DRA7XX_RM_L3MAIN1_VCP1_CONTEXT_OFFSET			0x008c
+#define DRA7XX_RM_L3MAIN1_VCP2_CONTEXT_OFFSET			0x0094
+#define DRA7XX_RM_L3MAIN1_SPARE_CME_CONTEXT_OFFSET		0x009c
+#define DRA7XX_RM_L3MAIN1_SPARE_HDMI_CONTEXT_OFFSET		0x00a4
+#define DRA7XX_RM_L3MAIN1_SPARE_ICM_CONTEXT_OFFSET		0x00ac
+#define DRA7XX_RM_L3MAIN1_SPARE_IVA2_CONTEXT_OFFSET		0x00b4
+#define DRA7XX_RM_L3MAIN1_SPARE_SATA2_CONTEXT_OFFSET		0x00bc
+#define DRA7XX_RM_L3MAIN1_SPARE_UNKNOWN4_CONTEXT_OFFSET		0x00c4
+#define DRA7XX_RM_L3MAIN1_SPARE_UNKNOWN5_CONTEXT_OFFSET		0x00cc
+#define DRA7XX_RM_L3MAIN1_SPARE_UNKNOWN6_CONTEXT_OFFSET		0x00d4
+#define DRA7XX_RM_L3MAIN1_SPARE_VIDEOPLL1_CONTEXT_OFFSET	0x00dc
+#define DRA7XX_RM_L3MAIN1_SPARE_VIDEOPLL2_CONTEXT_OFFSET	0x00f4
+#define DRA7XX_RM_L3MAIN1_SPARE_VIDEOPLL3_CONTEXT_OFFSET	0x00fc
+#define DRA7XX_RM_IPU2_RSTCTRL_OFFSET				0x0210
+#define DRA7XX_RM_IPU2_RSTST_OFFSET				0x0214
+#define DRA7XX_RM_IPU2_IPU2_CONTEXT_OFFSET			0x0224
+#define DRA7XX_RM_DMA_DMA_SYSTEM_CONTEXT_OFFSET			0x0324
+#define DRA7XX_RM_EMIF_DMM_CONTEXT_OFFSET			0x0424
+#define DRA7XX_RM_EMIF_EMIF_OCP_FW_CONTEXT_OFFSET		0x042c
+#define DRA7XX_RM_EMIF_EMIF1_CONTEXT_OFFSET			0x0434
+#define DRA7XX_RM_EMIF_EMIF2_CONTEXT_OFFSET			0x043c
+#define DRA7XX_RM_EMIF_EMIF_DLL_CONTEXT_OFFSET			0x0444
+#define DRA7XX_RM_ATL_ATL_CONTEXT_OFFSET			0x0524
+#define DRA7XX_RM_L4CFG_L4_CFG_CONTEXT_OFFSET			0x0624
+#define DRA7XX_RM_L4CFG_SPINLOCK_CONTEXT_OFFSET			0x062c
+#define DRA7XX_RM_L4CFG_MAILBOX1_CONTEXT_OFFSET			0x0634
+#define DRA7XX_RM_L4CFG_SAR_ROM_CONTEXT_OFFSET			0x063c
+#define DRA7XX_RM_L4CFG_OCP2SCP2_CONTEXT_OFFSET			0x0644
+#define DRA7XX_RM_L4CFG_MAILBOX2_CONTEXT_OFFSET			0x064c
+#define DRA7XX_RM_L4CFG_MAILBOX3_CONTEXT_OFFSET			0x0654
+#define DRA7XX_RM_L4CFG_MAILBOX4_CONTEXT_OFFSET			0x065c
+#define DRA7XX_RM_L4CFG_MAILBOX5_CONTEXT_OFFSET			0x0664
+#define DRA7XX_RM_L4CFG_MAILBOX6_CONTEXT_OFFSET			0x066c
+#define DRA7XX_RM_L4CFG_MAILBOX7_CONTEXT_OFFSET			0x0674
+#define DRA7XX_RM_L4CFG_MAILBOX8_CONTEXT_OFFSET			0x067c
+#define DRA7XX_RM_L4CFG_MAILBOX9_CONTEXT_OFFSET			0x0684
+#define DRA7XX_RM_L4CFG_MAILBOX10_CONTEXT_OFFSET		0x068c
+#define DRA7XX_RM_L4CFG_MAILBOX11_CONTEXT_OFFSET		0x0694
+#define DRA7XX_RM_L4CFG_MAILBOX12_CONTEXT_OFFSET		0x069c
+#define DRA7XX_RM_L4CFG_MAILBOX13_CONTEXT_OFFSET		0x06a4
+#define DRA7XX_RM_L4CFG_SPARE_SMARTREFLEX_RTC_CONTEXT_OFFSET	0x06ac
+#define DRA7XX_RM_L4CFG_SPARE_SMARTREFLEX_SDRAM_CONTEXT_OFFSET	0x06b4
+#define DRA7XX_RM_L4CFG_SPARE_SMARTREFLEX_WKUP_CONTEXT_OFFSET	0x06bc
+#define DRA7XX_RM_L4CFG_IO_DELAY_BLOCK_CONTEXT_OFFSET		0x06c4
+#define DRA7XX_RM_L3INSTR_L3_MAIN_2_CONTEXT_OFFSET		0x0724
+#define DRA7XX_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET		0x072c
+#define DRA7XX_RM_L3INSTR_OCP_WP_NOC_CONTEXT_OFFSET		0x0744
+
+/* PRM.IVA_PRM register offsets */
+#define DRA7XX_PM_IVA_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_IVA_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_IVA_RSTCTRL_OFFSET				0x0010
+#define DRA7XX_RM_IVA_RSTST_OFFSET				0x0014
+#define DRA7XX_RM_IVA_IVA_CONTEXT_OFFSET			0x0024
+#define DRA7XX_RM_IVA_SL2_CONTEXT_OFFSET			0x002c
+
+/* PRM.CAM_PRM register offsets */
+#define DRA7XX_PM_CAM_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_CAM_PWRSTST_OFFSET				0x0004
+#define DRA7XX_PM_CAM_VIP1_WKDEP_OFFSET				0x0020
+#define DRA7XX_RM_CAM_VIP1_CONTEXT_OFFSET			0x0024
+#define DRA7XX_PM_CAM_VIP2_WKDEP_OFFSET				0x0028
+#define DRA7XX_RM_CAM_VIP2_CONTEXT_OFFSET			0x002c
+#define DRA7XX_PM_CAM_VIP3_WKDEP_OFFSET				0x0030
+#define DRA7XX_RM_CAM_VIP3_CONTEXT_OFFSET			0x0034
+#define DRA7XX_RM_CAM_LVDSRX_CONTEXT_OFFSET			0x003c
+#define DRA7XX_RM_CAM_CSI1_CONTEXT_OFFSET			0x0044
+#define DRA7XX_RM_CAM_CSI2_CONTEXT_OFFSET			0x004c
+
+/* PRM.DSS_PRM register offsets */
+#define DRA7XX_PM_DSS_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_DSS_PWRSTST_OFFSET				0x0004
+#define DRA7XX_PM_DSS_DSS_WKDEP_OFFSET				0x0020
+#define DRA7XX_RM_DSS_DSS_CONTEXT_OFFSET			0x0024
+#define DRA7XX_PM_DSS_DSS2_WKDEP_OFFSET				0x0028
+#define DRA7XX_RM_DSS_BB2D_CONTEXT_OFFSET			0x0034
+#define DRA7XX_RM_DSS_SDVENC_CONTEXT_OFFSET			0x003c
+
+/* PRM.GPU_PRM register offsets */
+#define DRA7XX_PM_GPU_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_GPU_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_GPU_GPU_CONTEXT_OFFSET			0x0024
+
+/* PRM.L3INIT_PRM register offsets */
+#define DRA7XX_PM_L3INIT_PWRSTCTRL_OFFSET			0x0000
+#define DRA7XX_PM_L3INIT_PWRSTST_OFFSET				0x0004
+#define DRA7XX_PM_L3INIT_MMC1_WKDEP_OFFSET			0x0028
+#define DRA7XX_RM_L3INIT_MMC1_CONTEXT_OFFSET			0x002c
+#define DRA7XX_PM_L3INIT_MMC2_WKDEP_OFFSET			0x0030
+#define DRA7XX_RM_L3INIT_MMC2_CONTEXT_OFFSET			0x0034
+#define DRA7XX_PM_L3INIT_USB_OTG_SS2_WKDEP_OFFSET		0x0040
+#define DRA7XX_RM_L3INIT_USB_OTG_SS2_CONTEXT_OFFSET		0x0044
+#define DRA7XX_PM_L3INIT_USB_OTG_SS3_WKDEP_OFFSET		0x0048
+#define DRA7XX_RM_L3INIT_USB_OTG_SS3_CONTEXT_OFFSET		0x004c
+#define DRA7XX_PM_L3INIT_USB_OTG_SS4_WKDEP_OFFSET		0x0050
+#define DRA7XX_RM_L3INIT_USB_OTG_SS4_CONTEXT_OFFSET		0x0054
+#define DRA7XX_RM_L3INIT_MLB_SS_CONTEXT_OFFSET			0x005c
+#define DRA7XX_RM_L3INIT_IEEE1500_2_OCP_CONTEXT_OFFSET		0x007c
+#define DRA7XX_PM_L3INIT_SATA_WKDEP_OFFSET			0x0088
+#define DRA7XX_RM_L3INIT_SATA_CONTEXT_OFFSET			0x008c
+#define DRA7XX_RM_GMAC_GMAC_CONTEXT_OFFSET			0x00d4
+#define DRA7XX_RM_L3INIT_OCP2SCP1_CONTEXT_OFFSET		0x00e4
+#define DRA7XX_RM_L3INIT_OCP2SCP3_CONTEXT_OFFSET		0x00ec
+#define DRA7XX_PM_L3INIT_USB_OTG_SS1_WKDEP_OFFSET		0x00f0
+#define DRA7XX_RM_L3INIT_USB_OTG_SS1_CONTEXT_OFFSET		0x00f4
+
+/* PRM.L4PER_PRM register offsets */
+#define DRA7XX_PM_L4PER_PWRSTCTRL_OFFSET			0x0000
+#define DRA7XX_PM_L4PER_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_L4PER2_L4PER2_CONTEXT_OFFSET			0x000c
+#define DRA7XX_RM_L4PER3_L4PER3_CONTEXT_OFFSET			0x0014
+#define DRA7XX_RM_L4PER2_PRUSS1_CONTEXT_OFFSET			0x001c
+#define DRA7XX_RM_L4PER2_PRUSS2_CONTEXT_OFFSET			0x0024
+#define DRA7XX_PM_L4PER_TIMER10_WKDEP_OFFSET			0x0028
+#define DRA7XX_RM_L4PER_TIMER10_CONTEXT_OFFSET			0x002c
+#define DRA7XX_PM_L4PER_TIMER11_WKDEP_OFFSET			0x0030
+#define DRA7XX_RM_L4PER_TIMER11_CONTEXT_OFFSET			0x0034
+#define DRA7XX_PM_L4PER_TIMER2_WKDEP_OFFSET			0x0038
+#define DRA7XX_RM_L4PER_TIMER2_CONTEXT_OFFSET			0x003c
+#define DRA7XX_PM_L4PER_TIMER3_WKDEP_OFFSET			0x0040
+#define DRA7XX_RM_L4PER_TIMER3_CONTEXT_OFFSET			0x0044
+#define DRA7XX_PM_L4PER_TIMER4_WKDEP_OFFSET			0x0048
+#define DRA7XX_RM_L4PER_TIMER4_CONTEXT_OFFSET			0x004c
+#define DRA7XX_PM_L4PER_TIMER9_WKDEP_OFFSET			0x0050
+#define DRA7XX_RM_L4PER_TIMER9_CONTEXT_OFFSET			0x0054
+#define DRA7XX_RM_L4PER_ELM_CONTEXT_OFFSET			0x005c
+#define DRA7XX_PM_L4PER_GPIO2_WKDEP_OFFSET			0x0060
+#define DRA7XX_RM_L4PER_GPIO2_CONTEXT_OFFSET			0x0064
+#define DRA7XX_PM_L4PER_GPIO3_WKDEP_OFFSET			0x0068
+#define DRA7XX_RM_L4PER_GPIO3_CONTEXT_OFFSET			0x006c
+#define DRA7XX_PM_L4PER_GPIO4_WKDEP_OFFSET			0x0070
+#define DRA7XX_RM_L4PER_GPIO4_CONTEXT_OFFSET			0x0074
+#define DRA7XX_PM_L4PER_GPIO5_WKDEP_OFFSET			0x0078
+#define DRA7XX_RM_L4PER_GPIO5_CONTEXT_OFFSET			0x007c
+#define DRA7XX_PM_L4PER_GPIO6_WKDEP_OFFSET			0x0080
+#define DRA7XX_RM_L4PER_GPIO6_CONTEXT_OFFSET			0x0084
+#define DRA7XX_RM_L4PER_HDQ1W_CONTEXT_OFFSET			0x008c
+#define DRA7XX_RM_L4PER2_PWMSS2_CONTEXT_OFFSET			0x0094
+#define DRA7XX_RM_L4PER2_PWMSS3_CONTEXT_OFFSET			0x009c
+#define DRA7XX_PM_L4PER_I2C1_WKDEP_OFFSET			0x00a0
+#define DRA7XX_RM_L4PER_I2C1_CONTEXT_OFFSET			0x00a4
+#define DRA7XX_PM_L4PER_I2C2_WKDEP_OFFSET			0x00a8
+#define DRA7XX_RM_L4PER_I2C2_CONTEXT_OFFSET			0x00ac
+#define DRA7XX_PM_L4PER_I2C3_WKDEP_OFFSET			0x00b0
+#define DRA7XX_RM_L4PER_I2C3_CONTEXT_OFFSET			0x00b4
+#define DRA7XX_PM_L4PER_I2C4_WKDEP_OFFSET			0x00b8
+#define DRA7XX_RM_L4PER_I2C4_CONTEXT_OFFSET			0x00bc
+#define DRA7XX_RM_L4PER_L4PER1_CONTEXT_OFFSET			0x00c0
+#define DRA7XX_RM_L4PER2_PWMSS1_CONTEXT_OFFSET			0x00c4
+#define DRA7XX_PM_L4PER_TIMER13_WKDEP_OFFSET			0x00c8
+#define DRA7XX_RM_L4PER3_TIMER13_CONTEXT_OFFSET			0x00cc
+#define DRA7XX_PM_L4PER_TIMER14_WKDEP_OFFSET			0x00d0
+#define DRA7XX_RM_L4PER3_TIMER14_CONTEXT_OFFSET			0x00d4
+#define DRA7XX_PM_L4PER_TIMER15_WKDEP_OFFSET			0x00d8
+#define DRA7XX_RM_L4PER3_TIMER15_CONTEXT_OFFSET			0x00dc
+#define DRA7XX_PM_L4PER_MCSPI1_WKDEP_OFFSET			0x00f0
+#define DRA7XX_RM_L4PER_MCSPI1_CONTEXT_OFFSET			0x00f4
+#define DRA7XX_PM_L4PER_MCSPI2_WKDEP_OFFSET			0x00f8
+#define DRA7XX_RM_L4PER_MCSPI2_CONTEXT_OFFSET			0x00fc
+#define DRA7XX_PM_L4PER_MCSPI3_WKDEP_OFFSET			0x0100
+#define DRA7XX_RM_L4PER_MCSPI3_CONTEXT_OFFSET			0x0104
+#define DRA7XX_PM_L4PER_MCSPI4_WKDEP_OFFSET			0x0108
+#define DRA7XX_RM_L4PER_MCSPI4_CONTEXT_OFFSET			0x010c
+#define DRA7XX_PM_L4PER_GPIO7_WKDEP_OFFSET			0x0110
+#define DRA7XX_RM_L4PER_GPIO7_CONTEXT_OFFSET			0x0114
+#define DRA7XX_PM_L4PER_GPIO8_WKDEP_OFFSET			0x0118
+#define DRA7XX_RM_L4PER_GPIO8_CONTEXT_OFFSET			0x011c
+#define DRA7XX_PM_L4PER_MMC3_WKDEP_OFFSET			0x0120
+#define DRA7XX_RM_L4PER_MMC3_CONTEXT_OFFSET			0x0124
+#define DRA7XX_PM_L4PER_MMC4_WKDEP_OFFSET			0x0128
+#define DRA7XX_RM_L4PER_MMC4_CONTEXT_OFFSET			0x012c
+#define DRA7XX_PM_L4PER_TIMER16_WKDEP_OFFSET			0x0130
+#define DRA7XX_RM_L4PER3_TIMER16_CONTEXT_OFFSET			0x0134
+#define DRA7XX_PM_L4PER2_QSPI_WKDEP_OFFSET			0x0138
+#define DRA7XX_RM_L4PER2_QSPI_CONTEXT_OFFSET			0x013c
+#define DRA7XX_PM_L4PER_UART1_WKDEP_OFFSET			0x0140
+#define DRA7XX_RM_L4PER_UART1_CONTEXT_OFFSET			0x0144
+#define DRA7XX_PM_L4PER_UART2_WKDEP_OFFSET			0x0148
+#define DRA7XX_RM_L4PER_UART2_CONTEXT_OFFSET			0x014c
+#define DRA7XX_PM_L4PER_UART3_WKDEP_OFFSET			0x0150
+#define DRA7XX_RM_L4PER_UART3_CONTEXT_OFFSET			0x0154
+#define DRA7XX_PM_L4PER_UART4_WKDEP_OFFSET			0x0158
+#define DRA7XX_RM_L4PER_UART4_CONTEXT_OFFSET			0x015c
+#define DRA7XX_PM_L4PER2_MCASP2_WKDEP_OFFSET			0x0160
+#define DRA7XX_RM_L4PER2_MCASP2_CONTEXT_OFFSET			0x0164
+#define DRA7XX_PM_L4PER2_MCASP3_WKDEP_OFFSET			0x0168
+#define DRA7XX_RM_L4PER2_MCASP3_CONTEXT_OFFSET			0x016c
+#define DRA7XX_PM_L4PER_UART5_WKDEP_OFFSET			0x0170
+#define DRA7XX_RM_L4PER_UART5_CONTEXT_OFFSET			0x0174
+#define DRA7XX_PM_L4PER2_MCASP5_WKDEP_OFFSET			0x0178
+#define DRA7XX_RM_L4PER2_MCASP5_CONTEXT_OFFSET			0x017c
+#define DRA7XX_PM_L4PER2_MCASP6_WKDEP_OFFSET			0x0180
+#define DRA7XX_RM_L4PER2_MCASP6_CONTEXT_OFFSET			0x0184
+#define DRA7XX_PM_L4PER2_MCASP7_WKDEP_OFFSET			0x0188
+#define DRA7XX_RM_L4PER2_MCASP7_CONTEXT_OFFSET			0x018c
+#define DRA7XX_PM_L4PER2_MCASP8_WKDEP_OFFSET			0x0190
+#define DRA7XX_RM_L4PER2_MCASP8_CONTEXT_OFFSET			0x0194
+#define DRA7XX_PM_L4PER2_MCASP4_WKDEP_OFFSET			0x0198
+#define DRA7XX_RM_L4PER2_MCASP4_CONTEXT_OFFSET			0x019c
+#define DRA7XX_RM_L4SEC_AES1_CONTEXT_OFFSET			0x01a4
+#define DRA7XX_RM_L4SEC_AES2_CONTEXT_OFFSET			0x01ac
+#define DRA7XX_RM_L4SEC_DES3DES_CONTEXT_OFFSET			0x01b4
+#define DRA7XX_RM_L4SEC_FPKA_CONTEXT_OFFSET			0x01bc
+#define DRA7XX_RM_L4SEC_RNG_CONTEXT_OFFSET			0x01c4
+#define DRA7XX_RM_L4SEC_SHA2MD51_CONTEXT_OFFSET			0x01cc
+#define DRA7XX_PM_L4PER2_UART7_WKDEP_OFFSET			0x01d0
+#define DRA7XX_RM_L4PER2_UART7_CONTEXT_OFFSET			0x01d4
+#define DRA7XX_RM_L4SEC_DMA_CRYPTO_CONTEXT_OFFSET		0x01dc
+#define DRA7XX_PM_L4PER2_UART8_WKDEP_OFFSET			0x01e0
+#define DRA7XX_RM_L4PER2_UART8_CONTEXT_OFFSET			0x01e4
+#define DRA7XX_PM_L4PER2_UART9_WKDEP_OFFSET			0x01e8
+#define DRA7XX_RM_L4PER2_UART9_CONTEXT_OFFSET			0x01ec
+#define DRA7XX_PM_L4PER2_DCAN2_WKDEP_OFFSET			0x01f0
+#define DRA7XX_RM_L4PER2_DCAN2_CONTEXT_OFFSET			0x01f4
+#define DRA7XX_RM_L4SEC_SHA2MD52_CONTEXT_OFFSET			0x01fc
+
+/* PRM.CUSTEFUSE_PRM register offsets */
+#define DRA7XX_PM_CUSTEFUSE_PWRSTCTRL_OFFSET			0x0000
+#define DRA7XX_PM_CUSTEFUSE_PWRSTST_OFFSET			0x0004
+#define DRA7XX_RM_CUSTEFUSE_EFUSE_CTRL_CUST_CONTEXT_OFFSET	0x0024
+
+/* PRM.WKUPAON_PRM register offsets */
+#define DRA7XX_RM_WKUPAON_L4_WKUP_CONTEXT_OFFSET		0x0000
+#define DRA7XX_PM_WKUPAON_WD_TIMER1_WKDEP_OFFSET		0x0004
+#define DRA7XX_RM_WKUPAON_WD_TIMER1_CONTEXT_OFFSET		0x0008
+#define DRA7XX_PM_WKUPAON_WD_TIMER2_WKDEP_OFFSET		0x000c
+#define DRA7XX_RM_WKUPAON_WD_TIMER2_CONTEXT_OFFSET		0x0010
+#define DRA7XX_PM_WKUPAON_GPIO1_WKDEP_OFFSET			0x0014
+#define DRA7XX_RM_WKUPAON_GPIO1_CONTEXT_OFFSET			0x0018
+#define DRA7XX_PM_WKUPAON_TIMER1_WKDEP_OFFSET			0x001c
+#define DRA7XX_RM_WKUPAON_TIMER1_CONTEXT_OFFSET			0x0020
+#define DRA7XX_PM_WKUPAON_TIMER12_WKDEP_OFFSET			0x0024
+#define DRA7XX_RM_WKUPAON_TIMER12_CONTEXT_OFFSET		0x0028
+#define DRA7XX_RM_WKUPAON_COUNTER_32K_CONTEXT_OFFSET		0x0030
+#define DRA7XX_RM_WKUPAON_SAR_RAM_CONTEXT_OFFSET		0x0040
+#define DRA7XX_PM_WKUPAON_KBD_WKDEP_OFFSET			0x0054
+#define DRA7XX_RM_WKUPAON_KBD_CONTEXT_OFFSET			0x0058
+#define DRA7XX_PM_WKUPAON_UART10_WKDEP_OFFSET			0x005c
+#define DRA7XX_RM_WKUPAON_UART10_CONTEXT_OFFSET			0x0060
+#define DRA7XX_PM_WKUPAON_DCAN1_WKDEP_OFFSET			0x0064
+#define DRA7XX_RM_WKUPAON_DCAN1_CONTEXT_OFFSET			0x0068
+#define DRA7XX_PM_WKUPAON_ADC_WKDEP_OFFSET				0x007c
+#define DRA7XX_RM_WKUPAON_ADC_CONTEXT_OFFSET			0x0080
+#define DRA7XX_RM_WKUPAON_SPARE_SAFETY1_CONTEXT_OFFSET		0x0090
+#define DRA7XX_RM_WKUPAON_SPARE_SAFETY2_CONTEXT_OFFSET		0x0098
+#define DRA7XX_RM_WKUPAON_SPARE_SAFETY3_CONTEXT_OFFSET		0x00a0
+#define DRA7XX_RM_WKUPAON_SPARE_SAFETY4_CONTEXT_OFFSET		0x00a8
+#define DRA7XX_RM_WKUPAON_SPARE_UNKNOWN2_CONTEXT_OFFSET		0x00b0
+#define DRA7XX_RM_WKUPAON_SPARE_UNKNOWN3_CONTEXT_OFFSET		0x00b8
+
+/* PRM.WKUPAON_CM register offsets */
+#define DRA7XX_CM_WKUPAON_CLKSTCTRL_OFFSET			0x0000
+#define DRA7XX_CM_WKUPAON_L4_WKUP_CLKCTRL_OFFSET		0x0020
+#define DRA7XX_CM_WKUPAON_L4_WKUP_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0020)
+#define DRA7XX_CM_WKUPAON_WD_TIMER1_CLKCTRL_OFFSET		0x0028
+#define DRA7XX_CM_WKUPAON_WD_TIMER1_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0028)
+#define DRA7XX_CM_WKUPAON_WD_TIMER2_CLKCTRL_OFFSET		0x0030
+#define DRA7XX_CM_WKUPAON_WD_TIMER2_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0030)
+#define DRA7XX_CM_WKUPAON_GPIO1_CLKCTRL_OFFSET			0x0038
+#define DRA7XX_CM_WKUPAON_GPIO1_CLKCTRL				DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0038)
+#define DRA7XX_CM_WKUPAON_TIMER1_CLKCTRL_OFFSET			0x0040
+#define DRA7XX_CM_WKUPAON_TIMER1_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0040)
+#define DRA7XX_CM_WKUPAON_TIMER12_CLKCTRL_OFFSET		0x0048
+#define DRA7XX_CM_WKUPAON_TIMER12_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0048)
+#define DRA7XX_CM_WKUPAON_COUNTER_32K_CLKCTRL_OFFSET		0x0050
+#define DRA7XX_CM_WKUPAON_COUNTER_32K_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0050)
+#define DRA7XX_CM_WKUPAON_SAR_RAM_CLKCTRL_OFFSET		0x0060
+#define DRA7XX_CM_WKUPAON_SAR_RAM_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0060)
+#define DRA7XX_CM_WKUPAON_KBD_CLKCTRL_OFFSET			0x0078
+#define DRA7XX_CM_WKUPAON_KBD_CLKCTRL				DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0078)
+#define DRA7XX_CM_WKUPAON_UART10_CLKCTRL_OFFSET			0x0080
+#define DRA7XX_CM_WKUPAON_UART10_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0080)
+#define DRA7XX_CM_WKUPAON_DCAN1_CLKCTRL_OFFSET			0x0088
+#define DRA7XX_CM_WKUPAON_DCAN1_CLKCTRL				DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0088)
+#define DRA7XX_CM_WKUPAON_SCRM_CLKCTRL_OFFSET			0x0090
+#define DRA7XX_CM_WKUPAON_SCRM_CLKCTRL				DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0090)
+#define DRA7XX_CM_WKUPAON_IO_SRCOMP_CLKCTRL_OFFSET		0x0098
+#define DRA7XX_CM_WKUPAON_IO_SRCOMP_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0098)
+#define DRA7XX_CM_WKUPAON_ADC_CLKCTRL_OFFSET			0x00a0
+#define DRA7XX_CM_WKUPAON_ADC_CLKCTRL				DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x00a0)
+#define DRA7XX_CM_WKUPAON_SPARE_SAFETY1_CLKCTRL_OFFSET		0x00b0
+#define DRA7XX_CM_WKUPAON_SPARE_SAFETY1_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x00b0)
+#define DRA7XX_CM_WKUPAON_SPARE_SAFETY2_CLKCTRL_OFFSET		0x00b8
+#define DRA7XX_CM_WKUPAON_SPARE_SAFETY2_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x00b8)
+#define DRA7XX_CM_WKUPAON_SPARE_SAFETY3_CLKCTRL_OFFSET		0x00c0
+#define DRA7XX_CM_WKUPAON_SPARE_SAFETY3_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x00c0)
+#define DRA7XX_CM_WKUPAON_SPARE_SAFETY4_CLKCTRL_OFFSET		0x00c8
+#define DRA7XX_CM_WKUPAON_SPARE_SAFETY4_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x00c8)
+#define DRA7XX_CM_WKUPAON_SPARE_UNKNOWN2_CLKCTRL_OFFSET		0x00d0
+#define DRA7XX_CM_WKUPAON_SPARE_UNKNOWN2_CLKCTRL		DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x00d0)
+#define DRA7XX_CM_WKUPAON_SPARE_UNKNOWN3_CLKCTRL_OFFSET		0x00d8
+#define DRA7XX_CM_WKUPAON_SPARE_UNKNOWN3_CLKCTRL		DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x00d8)
+
+/* PRM.EMU_PRM register offsets */
+#define DRA7XX_PM_EMU_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_EMU_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_EMU_DEBUGSS_CONTEXT_OFFSET			0x0024
+
+/* PRM.EMU_CM register offsets */
+#define DRA7XX_CM_EMU_CLKSTCTRL_OFFSET				0x0000
+#define DRA7XX_CM_EMU_DEBUGSS_CLKCTRL_OFFSET			0x0004
+#define DRA7XX_CM_EMU_DEBUGSS_CLKCTRL				DRA7XX_PRM_REGADDR(DRA7XX_PRM_EMU_CM_INST, 0x0004)
+#define DRA7XX_CM_EMU_DYNAMICDEP_OFFSET				0x0008
+#define DRA7XX_CM_EMU_MPU_EMU_DBG_CLKCTRL_OFFSET		0x000c
+#define DRA7XX_CM_EMU_MPU_EMU_DBG_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_EMU_CM_INST, 0x000c)
+
+/* PRM.DSP2_PRM register offsets */
+#define DRA7XX_PM_DSP2_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_DSP2_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_DSP2_RSTCTRL_OFFSET				0x0010
+#define DRA7XX_RM_DSP2_RSTST_OFFSET				0x0014
+#define DRA7XX_RM_DSP2_DSP2_CONTEXT_OFFSET			0x0024
+
+/* PRM.EVE1_PRM register offsets */
+#define DRA7XX_PM_EVE1_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_EVE1_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_EVE1_RSTCTRL_OFFSET				0x0010
+#define DRA7XX_RM_EVE1_RSTST_OFFSET				0x0014
+#define DRA7XX_PM_EVE1_EVE1_WKDEP_OFFSET			0x0020
+#define DRA7XX_RM_EVE1_EVE1_CONTEXT_OFFSET			0x0024
+
+/* PRM.EVE2_PRM register offsets */
+#define DRA7XX_PM_EVE2_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_EVE2_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_EVE2_RSTCTRL_OFFSET				0x0010
+#define DRA7XX_RM_EVE2_RSTST_OFFSET				0x0014
+#define DRA7XX_PM_EVE2_EVE2_WKDEP_OFFSET			0x0020
+#define DRA7XX_RM_EVE2_EVE2_CONTEXT_OFFSET			0x0024
+
+/* PRM.EVE3_PRM register offsets */
+#define DRA7XX_PM_EVE3_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_EVE3_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_EVE3_RSTCTRL_OFFSET				0x0010
+#define DRA7XX_RM_EVE3_RSTST_OFFSET				0x0014
+#define DRA7XX_PM_EVE3_EVE3_WKDEP_OFFSET			0x0020
+#define DRA7XX_RM_EVE3_EVE3_CONTEXT_OFFSET			0x0024
+
+/* PRM.EVE4_PRM register offsets */
+#define DRA7XX_PM_EVE4_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_EVE4_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_EVE4_RSTCTRL_OFFSET				0x0010
+#define DRA7XX_RM_EVE4_RSTST_OFFSET				0x0014
+#define DRA7XX_PM_EVE4_EVE4_WKDEP_OFFSET			0x0020
+#define DRA7XX_RM_EVE4_EVE4_CONTEXT_OFFSET			0x0024
+
+/* PRM.RTC_PRM register offsets */
+#define DRA7XX_PM_RTC_RTCSS_WKDEP_OFFSET			0x0000
+#define DRA7XX_RM_RTC_RTCSS_CONTEXT_OFFSET			0x0004
+
+/* PRM.VPE_PRM register offsets */
+#define DRA7XX_PM_VPE_PWRSTCTRL_OFFSET				0x0000
+#define DRA7XX_PM_VPE_PWRSTST_OFFSET				0x0004
+#define DRA7XX_PM_VPE_VPE_WKDEP_OFFSET				0x0020
+#define DRA7XX_RM_VPE_VPE_CONTEXT_OFFSET			0x0024
+
+/* PRM.DEVICE_PRM register offsets */
+#define DRA7XX_PRM_RSTCTRL_OFFSET				0x0000
+#define DRA7XX_PRM_RSTST_OFFSET					0x0004
+#define DRA7XX_PRM_RSTTIME_OFFSET				0x0008
+#define DRA7XX_PRM_CLKREQCTRL_OFFSET				0x000c
+#define DRA7XX_PRM_VOLTCTRL_OFFSET				0x0010
+#define DRA7XX_PRM_PWRREQCTRL_OFFSET				0x0014
+#define DRA7XX_PRM_PSCON_COUNT_OFFSET				0x0018
+#define DRA7XX_PRM_IO_COUNT_OFFSET				0x001c
+#define DRA7XX_PRM_IO_PMCTRL_OFFSET				0x0020
+#define DRA7XX_PRM_VOLTSETUP_WARMRESET_OFFSET			0x0024
+#define DRA7XX_PRM_VOLTSETUP_CORE_OFF_OFFSET			0x0028
+#define DRA7XX_PRM_VOLTSETUP_MPU_OFF_OFFSET			0x002c
+#define DRA7XX_PRM_VOLTSETUP_MM_OFF_OFFSET			0x0030
+#define DRA7XX_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET		0x0034
+#define DRA7XX_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET		0x0038
+#define DRA7XX_PRM_VOLTSETUP_MM_RET_SLEEP_OFFSET		0x003c
+#define DRA7XX_PRM_SRAM_COUNT_OFFSET				0x00bc
+#define DRA7XX_PRM_SRAM_WKUP_SETUP_OFFSET			0x00c0
+#define DRA7XX_PRM_SLDO_CORE_SETUP_OFFSET			0x00c4
+#define DRA7XX_PRM_SLDO_CORE_CTRL_OFFSET			0x00c8
+#define DRA7XX_PRM_SLDO_MPU_SETUP_OFFSET			0x00cc
+#define DRA7XX_PRM_SLDO_MPU_CTRL_OFFSET				0x00d0
+#define DRA7XX_PRM_SLDO_GPU_SETUP_OFFSET			0x00d4
+#define DRA7XX_PRM_SLDO_GPU_CTRL_OFFSET				0x00d8
+#define DRA7XX_PRM_ABBLDO_MPU_SETUP_OFFSET			0x00dc
+#define DRA7XX_PRM_ABBLDO_MPU_CTRL_OFFSET			0x00e0
+#define DRA7XX_PRM_ABBLDO_GPU_SETUP_OFFSET			0x00e4
+#define DRA7XX_PRM_ABBLDO_GPU_CTRL_OFFSET			0x00e8
+#define DRA7XX_PRM_BANDGAP_SETUP_OFFSET				0x00ec
+#define DRA7XX_PRM_DEVICE_OFF_CTRL_OFFSET			0x00f0
+#define DRA7XX_PRM_PHASE1_CNDP_OFFSET				0x00f4
+#define DRA7XX_PRM_PHASE2A_CNDP_OFFSET				0x00f8
+#define DRA7XX_PRM_PHASE2B_CNDP_OFFSET				0x00fc
+#define DRA7XX_PRM_MODEM_IF_CTRL_OFFSET				0x0100
+#define DRA7XX_PRM_VOLTST_MPU_OFFSET				0x0110
+#define DRA7XX_PRM_VOLTST_MM_OFFSET				0x0114
+#define DRA7XX_PRM_SLDO_DSPEVE_SETUP_OFFSET			0x0118
+#define DRA7XX_PRM_SLDO_IVA_SETUP_OFFSET			0x011c
+#define DRA7XX_PRM_ABBLDO_DSPEVE_CTRL_OFFSET			0x0120
+#define DRA7XX_PRM_ABBLDO_IVA_CTRL_OFFSET			0x0124
+#define DRA7XX_PRM_SLDO_DSPEVE_CTRL_OFFSET			0x0128
+#define DRA7XX_PRM_SLDO_IVA_CTRL_OFFSET				0x012c
+#define DRA7XX_PRM_ABBLDO_DSPEVE_SETUP_OFFSET			0x0130
+#define DRA7XX_PRM_ABBLDO_IVA_SETUP_OFFSET			0x0134
+
+#endif
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 228b850..a2e1174 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -24,6 +24,7 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 
+#include "soc.h"
 #include "prm2xxx_3xxx.h"
 #include "prm2xxx.h"
 #include "prm3xxx.h"
@@ -322,6 +323,16 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
 		prcm_irq_chips[i] = gc;
 	}
 
+	if (of_have_populated_dt()) {
+		int irq = omap_prcm_event_to_irq("io");
+		if (cpu_is_omap34xx())
+			omap_pcs_legacy_init(irq,
+				omap3xxx_prm_reconfigure_io_chain);
+		else
+			omap_pcs_legacy_init(irq,
+				omap44xx_prm_reconfigure_io_chain);
+	}
+
 	return 0;
 
 err:
diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c
index c12320c0..6334b96 100644
--- a/arch/arm/mach-omap2/prminst44xx.c
+++ b/arch/arm/mach-omap2/prminst44xx.c
@@ -20,10 +20,13 @@
 #include "common.h"
 #include "prcm-common.h"
 #include "prm44xx.h"
+#include "prm54xx.h"
+#include "prm7xx.h"
 #include "prminst44xx.h"
 #include "prm-regbits-44xx.h"
 #include "prcm44xx.h"
 #include "prcm_mpu44xx.h"
+#include "soc.h"
 
 static void __iomem *_prm_bases[OMAP4_MAX_PRCM_PARTITIONS];
 
@@ -165,10 +168,19 @@ int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst,
 void omap4_prminst_global_warm_sw_reset(void)
 {
 	u32 v;
-
-	v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
-				    OMAP4430_PRM_DEVICE_INST,
-				    OMAP4_PRM_RSTCTRL_OFFSET);
+	s16 dev_inst;
+
+	if (cpu_is_omap44xx())
+		dev_inst = OMAP4430_PRM_DEVICE_INST;
+	else if (soc_is_omap54xx())
+		dev_inst = OMAP54XX_PRM_DEVICE_INST;
+	else if (soc_is_dra7xx())
+		dev_inst = DRA7XX_PRM_DEVICE_INST;
+	else
+		return;
+
+	v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, dev_inst,
+					OMAP4_PRM_RSTCTRL_OFFSET);
 	v |= OMAP4430_RST_GLOBAL_WARM_SW_MASK;
 	omap4_prminst_write_inst_reg(v, OMAP4430_PRM_PARTITION,
 				 OMAP4430_PRM_DEVICE_INST,
diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
index 8c616e4..076bd90 100644
--- a/arch/arm/mach-omap2/soc.h
+++ b/arch/arm/mach-omap2/soc.h
@@ -8,6 +8,7 @@
  * Written by Tony Lindgren <tony.lindgren@nokia.com>
  *
  * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ * Added DRA7xxx specific defines - Sricharan R<r.sricharan@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -35,6 +36,7 @@
 #ifndef __ASSEMBLY__
 
 #include <linux/bitops.h>
+#include <linux/of.h>
 
 /*
  * Test if multicore OMAP support is needed
@@ -105,6 +107,15 @@
 # endif
 #endif
 
+#ifdef CONFIG_SOC_DRA7XX
+# ifdef OMAP_NAME
+#  undef MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME DRA7XX
+# endif
+#endif
+
 /*
  * Omap device type i.e. EMU/HS/TST/GP/BAD
  */
@@ -233,6 +244,7 @@ IS_AM_SUBCLASS(437x, 0x437)
 #define cpu_is_omap447x()		0
 #define soc_is_omap54xx()		0
 #define soc_is_omap543x()		0
+#define soc_is_dra7xx()			0
 
 #if defined(MULTI_OMAP2)
 # if defined(CONFIG_ARCH_OMAP2)
@@ -379,6 +391,11 @@ IS_OMAP_TYPE(3430, 0x3430)
 # define soc_is_omap543x()		is_omap543x()
 #endif
 
+#if defined(CONFIG_SOC_DRA7XX)
+#undef soc_is_dra7xx
+#define soc_is_dra7xx()	(of_machine_is_compatible("ti,dra7"))
+#endif
+
 /* Various silicon revisions for omap2 */
 #define OMAP242X_CLASS		0x24200024
 #define OMAP2420_REV_ES1_0	OMAP242X_CLASS
@@ -438,9 +455,7 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define OMAP4470_REV_ES1_0	(OMAP447X_CLASS | (0x10 << 8))
 
 #define OMAP54XX_CLASS		0x54000054
-#define OMAP5430_REV_ES1_0	(OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8))
 #define OMAP5430_REV_ES2_0	(OMAP54XX_CLASS | (0x30 << 16) | (0x20 << 8))
-#define OMAP5432_REV_ES1_0	(OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8))
 #define OMAP5432_REV_ES2_0	(OMAP54XX_CLASS | (0x32 << 16) | (0x20 << 8))
 
 void omap2xxx_check_revision(void);
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index b37e1fc..3ca81e0 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -55,6 +55,7 @@
 #include "soc.h"
 #include "common.h"
 #include "powerdomain.h"
+#include "omap-secure.h"
 
 #define REALTIME_COUNTER_BASE				0x48243200
 #define INCREMENTER_NUMERATOR_OFFSET			0x10
@@ -66,6 +67,15 @@
 static struct omap_dm_timer clkev;
 static struct clock_event_device clockevent_gpt;
 
+#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
+static unsigned long arch_timer_freq;
+
+void set_cntfreq(void)
+{
+	omap_smc1(OMAP5_DRA7_MON_SET_CNTFRQ_INDEX, arch_timer_freq);
+}
+#endif
+
 static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
 {
 	struct clock_event_device *evt = &clockevent_gpt;
@@ -78,7 +88,7 @@ static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction omap2_gp_timer_irq = {
 	.name		= "gp_timer",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= omap2_gp_timer_interrupt,
 };
 
@@ -515,6 +525,10 @@ static void __init realtime_counter_init(void)
 		num = 8;
 		den = 25;
 		break;
+	case 20000000:
+		num = 192;
+		den = 625;
+		break;
 	case 2600000:
 		num = 384;
 		den = 1625;
@@ -537,11 +551,14 @@ static void __init realtime_counter_init(void)
 	reg |= num;
 	__raw_writel(reg, base + INCREMENTER_NUMERATOR_OFFSET);
 
-	reg = __raw_readl(base + INCREMENTER_NUMERATOR_OFFSET) &
+	reg = __raw_readl(base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET) &
 			NUMERATOR_DENUMERATOR_MASK;
 	reg |= den;
 	__raw_writel(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET);
 
+	arch_timer_freq = (rate / den) * num;
+	set_cntfreq();
+
 	iounmap(base);
 }
 #else
@@ -594,13 +611,14 @@ OMAP_SYS_GP_TIMER_INIT(3, 2, "timer_sys_ck", NULL,
 		       1, "timer_sys_ck", "ti,timer-alwon");
 #endif
 
-#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+	defined(CONFIG_SOC_DRA7XX)
 static OMAP_SYS_32K_TIMER_INIT(4, 1, "timer_32k_ck", "ti,timer-alwon",
 			       2, "sys_clkin_ck", NULL);
 #endif
 
 #ifdef CONFIG_ARCH_OMAP4
-#ifdef CONFIG_LOCAL_TIMERS
+#ifdef CONFIG_HAVE_ARM_TWD
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, OMAP44XX_LOCAL_TWD_BASE, 29);
 void __init omap4_local_timer_init(void)
 {
@@ -619,15 +637,15 @@ void __init omap4_local_timer_init(void)
 			pr_err("twd_local_timer_register failed %d\n", err);
 	}
 }
-#else /* CONFIG_LOCAL_TIMERS */
+#else
 void __init omap4_local_timer_init(void)
 {
 	omap4_sync32k_timer_init();
 }
-#endif /* CONFIG_LOCAL_TIMERS */
+#endif /* CONFIG_HAVE_ARM_TWD */
 #endif /* CONFIG_ARCH_OMAP4 */
 
-#ifdef CONFIG_SOC_OMAP5
+#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)
 void __init omap5_realtime_timer_init(void)
 {
 	omap4_sync32k_timer_init();
@@ -635,7 +653,7 @@ void __init omap5_realtime_timer_init(void)
 
 	clocksource_of_init();
 }
-#endif /* CONFIG_SOC_OMAP5 */
+#endif /* CONFIG_SOC_OMAP5 || CONFIG_SOC_DRA7XX */
 
 /**
  * omap_timer_init - build and register timer device with an
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index c05898f..b0d54da 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -24,6 +24,7 @@
 #include <linux/i2c/twl.h>
 #include <linux/gpio.h>
 #include <linux/string.h>
+#include <linux/phy/phy.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
 
@@ -90,8 +91,18 @@ void __init omap_pmic_late_init(void)
 }
 
 #if defined(CONFIG_ARCH_OMAP3)
+struct phy_consumer consumers[] = {
+	PHY_CONSUMER("musb-hdrc.0", "usb"),
+};
+
+struct phy_init_data init_data = {
+	.consumers = consumers,
+	.num_consumers = ARRAY_SIZE(consumers),
+};
+
 static struct twl4030_usb_data omap3_usb_pdata = {
 	.usb_mode	= T2_USB_MODE_ULPI,
+	.init_data	= &init_data,
 };
 
 static int omap3_batt_table[] = {
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index 2eb19d4..10855eb 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -28,7 +28,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/usb/phy.h>
-#include <linux/usb/nop-usb-xceiv.h>
+#include <linux/usb/usb_phy_gen_xceiv.h>
 
 #include "soc.h"
 #include "omap_device.h"
@@ -349,7 +349,7 @@ static struct fixed_voltage_config hsusb_reg_config = {
 	/* .init_data filled later */
 };
 
-static const char *nop_name = "nop_usb_xceiv"; /* NOP PHY driver */
+static const char *nop_name = "usb_phy_gen_xceiv"; /* NOP PHY driver */
 static const char *reg_name = "reg-fixed-voltage"; /* Regulator driver */
 
 /**
@@ -435,6 +435,7 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
 	struct platform_device *pdev;
 	char *phy_id;
 	struct platform_device_info pdevinfo;
+	struct usb_phy_gen_xceiv_platform_data nop_pdata;
 
 	for (i = 0; i < num_phys; i++) {
 
@@ -455,14 +456,21 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
 			return -ENOMEM;
 		}
 
+		/* set platform data */
+		memset(&nop_pdata, 0, sizeof(nop_pdata));
+		if (gpio_is_valid(phy->vcc_gpio))
+			nop_pdata.needs_vcc = true;
+		nop_pdata.gpio_reset = phy->reset_gpio;
+		nop_pdata.type = USB_PHY_TYPE_USB2;
+
 		/* create a NOP PHY device */
 		memset(&pdevinfo, 0, sizeof(pdevinfo));
 		pdevinfo.name = nop_name;
 		pdevinfo.id = phy->port;
-		pdevinfo.data = phy->platform_data;
-		pdevinfo.size_data = sizeof(struct nop_usb_xceiv_platform_data);
-
-		scnprintf(phy_id, MAX_STR, "nop_usb_xceiv.%d",
+		pdevinfo.data = &nop_pdata;
+		pdevinfo.size_data =
+			sizeof(struct usb_phy_gen_xceiv_platform_data);
+		scnprintf(phy_id, MAX_STR, "usb_phy_gen_xceiv.%d",
 					phy->port);
 		pdev = platform_device_register_full(&pdevinfo);
 		if (IS_ERR(pdev)) {
@@ -474,14 +482,6 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
 
 		usb_bind_phy("ehci-omap.0", phy->port - 1, phy_id);
 
-		/* Do we need RESET regulator ? */
-		if (gpio_is_valid(phy->reset_gpio)) {
-			scnprintf(rail_name, MAX_STR,
-					"hsusb%d_reset", phy->port);
-			usbhs_add_regulator(rail_name, phy_id, "reset",
-						phy->reset_gpio, 1);
-		}
-
 		/* Do we need VCC regulator ? */
 		if (gpio_is_valid(phy->vcc_gpio)) {
 			scnprintf(rail_name, MAX_STR, "hsusb%d_vcc", phy->port);
diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h
index e7261eb..4ba2ae7 100644
--- a/arch/arm/mach-omap2/usb.h
+++ b/arch/arm/mach-omap2/usb.h
@@ -58,7 +58,6 @@ struct usbhs_phy_data {
 	int reset_gpio;
 	int vcc_gpio;
 	bool vcc_polarity;	/* 1 active high, 0 active low */
-	void *platform_data;
 };
 
 extern void usb_musb_init(struct omap_musb_board_data *board_data);
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index b41599f..91a5852 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -174,8 +174,10 @@ void __init orion5x_xor_init(void)
  ****************************************************************************/
 static void __init orion5x_crypto_init(void)
 {
-	mvebu_mbus_add_window("sram", ORION5X_SRAM_PHYS_BASE,
-			      ORION5X_SRAM_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_SRAM_TARGET,
+				    ORION_MBUS_SRAM_ATTR,
+				    ORION5X_SRAM_PHYS_BASE,
+				    ORION5X_SRAM_SIZE);
 	orion_crypto_init(ORION5X_CRYPTO_PHYS_BASE, ORION5X_SRAM_PHYS_BASE,
 			  SZ_8K, IRQ_ORION5X_CESA);
 }
@@ -222,22 +224,24 @@ void orion5x_setup_wins(void)
 	 * The PCIe windows will no longer be statically allocated
 	 * here once Orion5x is migrated to the pci-mvebu driver.
 	 */
-	mvebu_mbus_add_window_remap_flags("pcie0.0", ORION5X_PCIE_IO_PHYS_BASE,
+	mvebu_mbus_add_window_remap_by_id(ORION_MBUS_PCIE_IO_TARGET,
+					  ORION_MBUS_PCIE_IO_ATTR,
+					  ORION5X_PCIE_IO_PHYS_BASE,
 					  ORION5X_PCIE_IO_SIZE,
-					  ORION5X_PCIE_IO_BUS_BASE,
-					  MVEBU_MBUS_PCI_IO);
-	mvebu_mbus_add_window_remap_flags("pcie0.0", ORION5X_PCIE_MEM_PHYS_BASE,
-					  ORION5X_PCIE_MEM_SIZE,
-					  MVEBU_MBUS_NO_REMAP,
-					  MVEBU_MBUS_PCI_MEM);
-	mvebu_mbus_add_window_remap_flags("pci0.0", ORION5X_PCI_IO_PHYS_BASE,
+					  ORION5X_PCIE_IO_BUS_BASE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_PCIE_MEM_TARGET,
+				    ORION_MBUS_PCIE_MEM_ATTR,
+				    ORION5X_PCIE_MEM_PHYS_BASE,
+				    ORION5X_PCIE_MEM_SIZE);
+	mvebu_mbus_add_window_remap_by_id(ORION_MBUS_PCI_IO_TARGET,
+					  ORION_MBUS_PCI_IO_ATTR,
+					  ORION5X_PCI_IO_PHYS_BASE,
 					  ORION5X_PCI_IO_SIZE,
-					  ORION5X_PCI_IO_BUS_BASE,
-					  MVEBU_MBUS_PCI_IO);
-	mvebu_mbus_add_window_remap_flags("pci0.0", ORION5X_PCI_MEM_PHYS_BASE,
-					  ORION5X_PCI_MEM_SIZE,
-					  MVEBU_MBUS_NO_REMAP,
-					  MVEBU_MBUS_PCI_MEM);
+					  ORION5X_PCI_IO_BUS_BASE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_PCI_MEM_TARGET,
+				    ORION_MBUS_PCI_MEM_ATTR,
+				    ORION5X_PCI_MEM_PHYS_BASE,
+				    ORION5X_PCI_MEM_SIZE);
 }
 
 int orion5x_tclk;
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index a909afb..f565f99 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -7,6 +7,23 @@ struct dsa_platform_data;
 struct mv643xx_eth_platform_data;
 struct mv_sata_platform_data;
 
+#define ORION_MBUS_PCIE_MEM_TARGET    0x04
+#define ORION_MBUS_PCIE_MEM_ATTR      0x59
+#define ORION_MBUS_PCIE_IO_TARGET     0x04
+#define ORION_MBUS_PCIE_IO_ATTR       0x51
+#define ORION_MBUS_PCIE_WA_TARGET     0x04
+#define ORION_MBUS_PCIE_WA_ATTR       0x79
+#define ORION_MBUS_PCI_MEM_TARGET     0x03
+#define ORION_MBUS_PCI_MEM_ATTR       0x59
+#define ORION_MBUS_PCI_IO_TARGET      0x03
+#define ORION_MBUS_PCI_IO_ATTR        0x51
+#define ORION_MBUS_DEVBUS_BOOT_TARGET 0x01
+#define ORION_MBUS_DEVBUS_BOOT_ATTR   0x0f
+#define ORION_MBUS_DEVBUS_TARGET(cs)  0x01
+#define ORION_MBUS_DEVBUS_ATTR(cs)    (~(1 << cs))
+#define ORION_MBUS_SRAM_TARGET        0x00
+#define ORION_MBUS_SRAM_ATTR          0x00
+
 /*
  * Basic Orion init functions used early by machine-setup.
  */
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index 16c88bb..8f68b74 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -317,8 +317,10 @@ static void __init d2net_init(void)
 	d2net_sata_power_init();
 	orion5x_sata_init(&d2net_sata_data);
 
-	mvebu_mbus_add_window("devbus-boot", D2NET_NOR_BOOT_BASE,
-			      D2NET_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    D2NET_NOR_BOOT_BASE,
+				    D2NET_NOR_BOOT_SIZE);
 	platform_device_register(&d2net_nor_flash);
 
 	platform_device_register(&d2net_gpio_buttons);
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 4e1263d..4b2aefd 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -340,19 +340,27 @@ static void __init db88f5281_init(void)
 	orion5x_uart0_init();
 	orion5x_uart1_init();
 
-	mvebu_mbus_add_window("devbus-boot", DB88F5281_NOR_BOOT_BASE,
-			      DB88F5281_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    DB88F5281_NOR_BOOT_BASE,
+				    DB88F5281_NOR_BOOT_SIZE);
 	platform_device_register(&db88f5281_boot_flash);
 
-	mvebu_mbus_add_window("devbus-cs0", DB88F5281_7SEG_BASE,
-			      DB88F5281_7SEG_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(0),
+				    ORION_MBUS_DEVBUS_ATTR(0),
+				    DB88F5281_7SEG_BASE,
+				    DB88F5281_7SEG_SIZE);
 
-	mvebu_mbus_add_window("devbus-cs1", DB88F5281_NOR_BASE,
-			      DB88F5281_NOR_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(1),
+				    ORION_MBUS_DEVBUS_ATTR(1),
+				    DB88F5281_NOR_BASE,
+				    DB88F5281_NOR_SIZE);
 	platform_device_register(&db88f5281_nor_flash);
 
-	mvebu_mbus_add_window("devbus-cs2", DB88F5281_NAND_BASE,
-			      DB88F5281_NAND_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(2),
+				    ORION_MBUS_DEVBUS_ATTR(2),
+				    DB88F5281_NAND_BASE,
+				    DB88F5281_NAND_SIZE);
 	platform_device_register(&db88f5281_nand_flash);
 
 	i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 9e6baf5..7097473 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -611,8 +611,10 @@ static void __init dns323_init(void)
 	/* setup flash mapping
 	 * CS3 holds a 8 MB Spansion S29GL064M90TFIR4
 	 */
-	mvebu_mbus_add_window("devbus-boot", DNS323_NOR_BOOT_BASE,
-			      DNS323_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    DNS323_NOR_BOOT_BASE,
+				    DNS323_NOR_BOOT_SIZE);
 	platform_device_register(&dns323_nor_flash);
 
 	/* Sort out LEDs, Buttons and i2c devices */
diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c
index 1476155..f66c1b2 100644
--- a/arch/arm/mach-orion5x/edmini_v2-setup.c
+++ b/arch/arm/mach-orion5x/edmini_v2-setup.c
@@ -23,8 +23,8 @@
 #include <linux/platform_device.h>
 #include <linux/pci.h>
 #include <linux/irq.h>
+#include <linux/mbus.h>
 #include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
 #include <linux/leds.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
@@ -96,14 +96,6 @@ static struct platform_device edmini_v2_nor_flash = {
 };
 
 /*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data edmini_v2_eth_data = {
-	.phy_addr	= 8,
-};
-
-/*****************************************************************************
  * RTC 5C372a on I2C bus
  ****************************************************************************/
 
@@ -152,10 +144,11 @@ void __init edmini_v2_init(void)
 	 * Configure peripherals.
 	 */
 	orion5x_ehci0_init();
-	orion5x_eth_init(&edmini_v2_eth_data);
 
-	mvebu_mbus_add_window("devbus-boot", EDMINI_V2_NOR_BOOT_BASE,
-			      EDMINI_V2_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    EDMINI_V2_NOR_BOOT_BASE,
+				    EDMINI_V2_NOR_BOOT_SIZE);
 	platform_device_register(&edmini_v2_nor_flash);
 
 	pr_notice("edmini_v2: USB device port, flash write and power-off "
diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S
deleted file mode 100644
index f340ed8..0000000
--- a/arch/arm/mach-orion5x/include/mach/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <mach/orion5x.h>
-
-	.macro  addruart, rp, rv, tmp
-	ldr	\rp, =ORION5X_REGS_PHYS_BASE
-	ldr	\rv, =ORION5X_REGS_VIRT_BASE
-	orr	\rp, \rp, #0x00012000
-	orr	\rv, \rv, #0x00012000
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index aae10e4..fe6a48a 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -359,13 +359,17 @@ static void __init kurobox_pro_init(void)
 	orion5x_uart1_init();
 	orion5x_xor_init();
 
-	mvebu_mbus_add_window("devbus-boot", KUROBOX_PRO_NOR_BOOT_BASE,
-			      KUROBOX_PRO_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    KUROBOX_PRO_NOR_BOOT_BASE,
+				    KUROBOX_PRO_NOR_BOOT_SIZE);
 	platform_device_register(&kurobox_pro_nor_flash);
 
 	if (machine_is_kurobox_pro()) {
-		mvebu_mbus_add_window("devbus-cs0", KUROBOX_PRO_NAND_BASE,
-				      KUROBOX_PRO_NAND_SIZE);
+		mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(0),
+					    ORION_MBUS_DEVBUS_ATTR(0),
+					    KUROBOX_PRO_NAND_BASE,
+					    KUROBOX_PRO_NAND_SIZE);
 		platform_device_register(&kurobox_pro_nand_flash);
 	}
 
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
index 6234977..028ea03 100644
--- a/arch/arm/mach-orion5x/ls-chl-setup.c
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -294,8 +294,10 @@ static void __init lschl_init(void)
 	orion5x_uart0_init();
 	orion5x_xor_init();
 
-	mvebu_mbus_add_window("devbus-boot", LSCHL_NOR_BOOT_BASE,
-			      LSCHL_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    LSCHL_NOR_BOOT_BASE,
+				    LSCHL_NOR_BOOT_SIZE);
 	platform_device_register(&lschl_nor_flash);
 
 	platform_device_register(&lschl_leds);
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index fe04c4b..32b7129 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -243,8 +243,10 @@ static void __init ls_hgl_init(void)
 	orion5x_uart0_init();
 	orion5x_xor_init();
 
-	mvebu_mbus_add_window("devbus-boot", LS_HGL_NOR_BOOT_BASE,
-			      LS_HGL_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    LS_HGL_NOR_BOOT_BASE,
+				    LS_HGL_NOR_BOOT_SIZE);
 	platform_device_register(&ls_hgl_nor_flash);
 
 	platform_device_register(&ls_hgl_button_device);
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index ca4dbe9..a6493e7 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -244,8 +244,10 @@ static void __init lsmini_init(void)
 	orion5x_uart0_init();
 	orion5x_xor_init();
 
-	mvebu_mbus_add_window("devbus-boot", LSMINI_NOR_BOOT_BASE,
-			      LSMINI_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    LSMINI_NOR_BOOT_BASE,
+				    LSMINI_NOR_BOOT_SIZE);
 	platform_device_register(&lsmini_nor_flash);
 
 	platform_device_register(&lsmini_button_device);
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 827acba..e105130 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -241,8 +241,10 @@ static void __init mss2_init(void)
 	orion5x_uart0_init();
 	orion5x_xor_init();
 
-	mvebu_mbus_add_window("devbus-boot", MSS2_NOR_BOOT_BASE,
-			      MSS2_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    MSS2_NOR_BOOT_BASE,
+				    MSS2_NOR_BOOT_SIZE);
 	platform_device_register(&mss2_nor_flash);
 
 	platform_device_register(&mss2_button_device);
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index 92600ae..e032f01 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -204,8 +204,10 @@ static void __init mv2120_init(void)
 	orion5x_uart0_init();
 	orion5x_xor_init();
 
-	mvebu_mbus_add_window("devbus-boot", MV2120_NOR_BOOT_BASE,
-			      MV2120_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    MV2120_NOR_BOOT_BASE,
+				    MV2120_NOR_BOOT_SIZE);
 	platform_device_register(&mv2120_nor_flash);
 
 	platform_device_register(&mv2120_button_device);
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index dd0641a..ba73dc7 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -397,8 +397,10 @@ static void __init net2big_init(void)
 	net2big_sata_power_init();
 	orion5x_sata_init(&net2big_sata_data);
 
-	mvebu_mbus_add_window("devbus-boot", NET2BIG_NOR_BOOT_BASE,
-			      NET2BIG_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    NET2BIG_NOR_BOOT_BASE,
+				    NET2BIG_NOR_BOOT_SIZE);
 	platform_device_register(&net2big_nor_flash);
 
 	platform_device_register(&net2big_gpio_buttons);
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index 5033680..7fab670 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -157,11 +157,10 @@ static int __init pcie_setup(struct pci_sys_data *sys)
 	if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) {
 		printk(KERN_NOTICE "Applying Orion-1/Orion-NAS PCIe config "
 				   "read transaction workaround\n");
-		mvebu_mbus_add_window_remap_flags("pcie0.0",
-						  ORION5X_PCIE_WA_PHYS_BASE,
-						  ORION5X_PCIE_WA_SIZE,
-						  MVEBU_MBUS_NO_REMAP,
-						  MVEBU_MBUS_PCI_WA);
+		mvebu_mbus_add_window_by_id(ORION_MBUS_PCIE_WA_TARGET,
+					    ORION_MBUS_PCIE_WA_ATTR,
+					    ORION5X_PCIE_WA_PHYS_BASE,
+					    ORION5X_PCIE_WA_SIZE);
 		pcie_ops.read = pcie_rd_conf_wa;
 	}
 
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 1c4498b..213b3e1 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -123,8 +123,10 @@ static void __init rd88f5181l_fxo_init(void)
 	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data, NO_IRQ);
 	orion5x_uart0_init();
 
-	mvebu_mbus_add_window("devbus-boot", RD88F5181L_FXO_NOR_BOOT_BASE,
-			      RD88F5181L_FXO_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    RD88F5181L_FXO_NOR_BOOT_BASE,
+				    RD88F5181L_FXO_NOR_BOOT_SIZE);
 	platform_device_register(&rd88f5181l_fxo_nor_boot_flash);
 }
 
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index adabe34..594800e 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -130,8 +130,10 @@ static void __init rd88f5181l_ge_init(void)
 	orion5x_i2c_init();
 	orion5x_uart0_init();
 
-	mvebu_mbus_add_window("devbus-boot", RD88F5181L_GE_NOR_BOOT_BASE,
-			      RD88F5181L_GE_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    RD88F5181L_GE_NOR_BOOT_BASE,
+				    RD88F5181L_GE_NOR_BOOT_SIZE);
 	platform_device_register(&rd88f5181l_ge_nor_boot_flash);
 
 	i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1);
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 66e77ec..b1cf684 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -264,11 +264,14 @@ static void __init rd88f5182_init(void)
 	orion5x_uart0_init();
 	orion5x_xor_init();
 
-	mvebu_mbus_add_window("devbus-boot", RD88F5182_NOR_BOOT_BASE,
-			      RD88F5182_NOR_BOOT_SIZE);
-
-	mvebu_mbus_add_window("devbus-cs1", RD88F5182_NOR_BASE,
-			      RD88F5182_NOR_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    RD88F5182_NOR_BOOT_BASE,
+				    RD88F5182_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(1),
+				    ORION_MBUS_DEVBUS_ATTR(1),
+				    RD88F5182_NOR_BASE,
+				    RD88F5182_NOR_SIZE);
 	platform_device_register(&rd88f5182_nor_flash);
 	platform_device_register(&rd88f5182_gpio_leds);
 
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index a0bfa53..7e90648 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -329,8 +329,10 @@ static void __init tsp2_init(void)
 	/*
 	 * Configure peripherals.
 	 */
-	mvebu_mbus_add_window("devbus-boot", TSP2_NOR_BOOT_BASE,
-			      TSP2_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    TSP2_NOR_BOOT_BASE,
+				    TSP2_NOR_BOOT_SIZE);
 	platform_device_register(&tsp2_nor_flash);
 
 	orion5x_ehci0_init();
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 80174f0..e90c061 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -286,8 +286,10 @@ static void __init qnap_ts209_init(void)
 	/*
 	 * Configure peripherals.
 	 */
-	mvebu_mbus_add_window("devbus-boot", QNAP_TS209_NOR_BOOT_BASE,
-			      QNAP_TS209_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    QNAP_TS209_NOR_BOOT_BASE,
+				    QNAP_TS209_NOR_BOOT_SIZE);
 	platform_device_register(&qnap_ts209_nor_flash);
 
 	orion5x_ehci0_init();
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 9259279..5c079d31 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -277,8 +277,10 @@ static void __init qnap_ts409_init(void)
 	/*
 	 * Configure peripherals.
 	 */
-	mvebu_mbus_add_window("devbus-boot", QNAP_TS409_NOR_BOOT_BASE,
-			      QNAP_TS409_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    QNAP_TS409_NOR_BOOT_BASE,
+				    QNAP_TS409_NOR_BOOT_SIZE);
 	platform_device_register(&qnap_ts409_nor_flash);
 
 	orion5x_ehci0_init();
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 6b84863..80a56ee 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -127,8 +127,10 @@ static void __init wnr854t_init(void)
 	orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ);
 	orion5x_uart0_init();
 
-	mvebu_mbus_add_window("devbus-boot", WNR854T_NOR_BOOT_BASE,
-			      WNR854T_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    WNR854T_NOR_BOOT_BASE,
+				    WNR854T_NOR_BOOT_SIZE);
 	platform_device_register(&wnr854t_nor_flash);
 }
 
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index fae684b..670e30d 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -213,8 +213,10 @@ static void __init wrt350n_v2_init(void)
 	orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data, NO_IRQ);
 	orion5x_uart0_init();
 
-	mvebu_mbus_add_window("devbus-boot", WRT350N_V2_NOR_BOOT_BASE,
-			      WRT350N_V2_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    WRT350N_V2_NOR_BOOT_BASE,
+				    WRT350N_V2_NOR_BOOT_SIZE);
 	platform_device_register(&wrt350n_v2_nor_flash);
 	platform_device_register(&wrt350n_v2_leds);
 	platform_device_register(&wrt350n_v2_button_device);
diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c
index e110b6d..d49aff7 100644
--- a/arch/arm/mach-prima2/common.c
+++ b/arch/arm/mach-prima2/common.c
@@ -6,7 +6,6 @@
  * Licensed under GPLv2 or later.
  */
 
-#include <linux/clocksource.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <asm/sizes.h>
@@ -21,13 +20,6 @@ void __init sirfsoc_init_late(void)
 	sirfsoc_pm_init();
 }
 
-static __init void sirfsoc_init_time(void)
-{
-	/* initialize clocking early, we want to set the OS timer */
-	sirfsoc_of_clk_init();
-	clocksource_of_init();
-}
-
 static __init void sirfsoc_map_io(void)
 {
 	sirfsoc_map_lluart();
@@ -43,7 +35,6 @@ static const char *atlas6_dt_match[] __initdata = {
 DT_MACHINE_START(ATLAS6_DT, "Generic ATLAS6 (Flattened Device Tree)")
 	/* Maintainer: Barry Song <baohua.song@csr.com> */
 	.map_io         = sirfsoc_map_io,
-	.init_time	= sirfsoc_init_time,
 	.init_late	= sirfsoc_init_late,
 	.dt_compat      = atlas6_dt_match,
 	.restart	= sirfsoc_restart,
@@ -59,7 +50,6 @@ static const char *prima2_dt_match[] __initdata = {
 DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)")
 	/* Maintainer: Barry Song <baohua.song@csr.com> */
 	.map_io         = sirfsoc_map_io,
-	.init_time	= sirfsoc_init_time,
 	.dma_zone_size	= SZ_256M,
 	.init_late	= sirfsoc_init_late,
 	.dt_compat      = prima2_dt_match,
@@ -77,7 +67,6 @@ DT_MACHINE_START(MARCO_DT, "Generic MARCO (Flattened Device Tree)")
 	/* Maintainer: Barry Song <baohua.song@csr.com> */
 	.smp            = smp_ops(sirfsoc_smp_ops),
 	.map_io         = sirfsoc_map_io,
-	.init_time	= sirfsoc_init_time,
 	.init_late	= sirfsoc_init_late,
 	.dt_compat      = marco_dt_match,
 	.restart	= sirfsoc_restart,
diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h
index a630485..4b76806 100644
--- a/arch/arm/mach-prima2/common.h
+++ b/arch/arm/mach-prima2/common.h
@@ -23,7 +23,6 @@ extern void sirfsoc_secondary_startup(void);
 extern void sirfsoc_cpu_die(unsigned int cpu);
 
 extern void __init sirfsoc_of_irq_init(void);
-extern void __init sirfsoc_of_clk_init(void);
 extern void sirfsoc_restart(enum reboot_mode, const char *);
 extern asmlinkage void __exception_irq_entry sirfsoc_handle_irq(struct pt_regs *regs);
 
diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c
index 02cc3438..c4525a8 100644
--- a/arch/arm/mach-prima2/pm.c
+++ b/arch/arm/mach-prima2/pm.c
@@ -34,7 +34,10 @@ static void sirfsoc_set_wakeup_source(void)
 	pwr_trigger_en_reg = sirfsoc_rtc_iobrg_readl(sirfsoc_pwrc_base +
 		SIRFSOC_PWRC_TRIGGER_EN);
 #define X_ON_KEY_B (1 << 0)
-	sirfsoc_rtc_iobrg_writel(pwr_trigger_en_reg | X_ON_KEY_B,
+#define RTC_ALARM0_B (1 << 2)
+#define RTC_ALARM1_B (1 << 3)
+	sirfsoc_rtc_iobrg_writel(pwr_trigger_en_reg | X_ON_KEY_B |
+		RTC_ALARM0_B | RTC_ALARM1_B,
 		sirfsoc_pwrc_base + SIRFSOC_PWRC_TRIGGER_EN);
 }
 
@@ -85,12 +88,6 @@ static const struct platform_suspend_ops sirfsoc_pm_ops = {
 	.valid = suspend_valid_only_mem,
 };
 
-int __init sirfsoc_pm_init(void)
-{
-	suspend_set_ops(&sirfsoc_pm_ops);
-	return 0;
-}
-
 static const struct of_device_id pwrc_ids[] = {
 	{ .compatible = "sirf,prima2-pwrc" },
 	{}
@@ -118,7 +115,6 @@ static int __init sirfsoc_of_pwrc_init(void)
 
 	return 0;
 }
-postcore_initcall(sirfsoc_of_pwrc_init);
 
 static const struct of_device_id memc_ids[] = {
 	{ .compatible = "sirf,prima2-memc" },
@@ -149,4 +145,11 @@ static int __init sirfsoc_memc_init(void)
 {
 	return platform_driver_register(&sirfsoc_memc_driver);
 }
-postcore_initcall(sirfsoc_memc_init);
+
+int __init sirfsoc_pm_init(void)
+{
+	sirfsoc_of_pwrc_init();
+	sirfsoc_memc_init();
+	suspend_set_ops(&sirfsoc_pm_ops);
+	return 0;
+}
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 8091aac..f942349 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -29,7 +29,7 @@
 #include <linux/pwm_backlight.h>
 
 #include <linux/i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/i2c/pxa-i2c.h>
 
 #include <linux/mfd/da903x.h>
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 3a3362f..8eb4e23 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -30,7 +30,7 @@
 #include <linux/power_supply.h>
 #include <linux/apm-emulation.h>
 #include <linux/i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <linux/regulator/userspace-consumer.h>
 
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index fe31bfc..c98511c 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -73,9 +73,6 @@ static struct pxa2xx_spi_chip mcp251x_chip_info4 = {
 
 static struct mcp251x_platform_data mcp251x_info = {
 	.oscillator_frequency = 16E6,
-	.board_specific_setup = NULL,
-	.power_enable         = NULL,
-	.transceiver_enable   = NULL
 };
 
 static struct spi_board_info mcp251x_board_info[] = {
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 13e5b00..3133ba8 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -408,7 +408,7 @@ struct pxacamera_platform_data pcm990_pxacamera_platform_data = {
 	.mclk_10khz = 1000,
 };
 
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 
 static struct pca953x_platform_data pca9536_data = {
 	.gpio_base	= PXA_NR_BUILTIN_GPIO,
diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c
index 3835979..f6a2c4b 100644
--- a/arch/arm/mach-pxa/pxa-dt.c
+++ b/arch/arm/mach-pxa/pxa-dt.c
@@ -28,7 +28,7 @@ static const struct of_dev_auxdata pxa3xx_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("mrvl,pxa-uart",		0x40700000, "pxa2xx-uart.2", NULL),
 	OF_DEV_AUXDATA("mrvl,pxa-uart",		0x41600000, "pxa2xx-uart.3", NULL),
 	OF_DEV_AUXDATA("marvell,pxa-mmc",	0x41100000, "pxa2xx-mci.0", NULL),
-	OF_DEV_AUXDATA("mrvl,pxa-gpio",		0x40e00000, "pxa-gpio", NULL),
+	OF_DEV_AUXDATA("intel,pxa3xx-gpio",	0x40e00000, "pxa3xx-gpio", NULL),
 	OF_DEV_AUXDATA("marvell,pxa-ohci",	0x4c000000, "pxa27x-ohci", NULL),
 	OF_DEV_AUXDATA("mrvl,pxa-i2c",		0x40301680, "pxa2xx-i2c.0", NULL),
 	OF_DEV_AUXDATA("mrvl,pwri2c",		0x40f500c0, "pxa3xx-i2c.1", NULL),
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 4c29173..0b11c1a 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -20,7 +20,7 @@
 #include <linux/leds.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/spi/corgi_lcd.h>
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index f5d4364..b19d1c3 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -26,9 +26,11 @@
 #include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/apm-emulation.h>
 #include <linux/can/platform/mcp251x.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/suspend.h>
@@ -391,33 +393,34 @@ static struct pxa2xx_spi_master pxa2xx_spi_ssp3_master_info = {
 };
 
 /* CAN bus on SPI */
-static int zeus_mcp2515_setup(struct spi_device *sdev)
-{
-	int err;
-
-	err = gpio_request(ZEUS_CAN_SHDN_GPIO, "CAN shutdown");
-	if (err)
-		return err;
+static struct regulator_consumer_supply can_regulator_consumer =
+	REGULATOR_SUPPLY("vdd", "spi3.0");
 
-	err = gpio_direction_output(ZEUS_CAN_SHDN_GPIO, 1);
-	if (err) {
-		gpio_free(ZEUS_CAN_SHDN_GPIO);
-		return err;
-	}
+static struct regulator_init_data can_regulator_init_data = {
+	.constraints	= {
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+	},
+	.consumer_supplies	= &can_regulator_consumer,
+	.num_consumer_supplies	= 1,
+};
 
-	return 0;
-}
+static struct fixed_voltage_config can_regulator_pdata = {
+	.supply_name	= "CAN_SHDN",
+	.microvolts	= 3300000,
+	.gpio		= ZEUS_CAN_SHDN_GPIO,
+	.init_data	= &can_regulator_init_data,
+};
 
-static int zeus_mcp2515_transceiver_enable(int enable)
-{
-	gpio_set_value(ZEUS_CAN_SHDN_GPIO, !enable);
-	return 0;
-}
+static struct platform_device can_regulator_device = {
+	.name	= "reg-fixed-volage",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &can_regulator_pdata,
+	},
+};
 
 static struct mcp251x_platform_data zeus_mcp2515_pdata = {
 	.oscillator_frequency	= 16*1000*1000,
-	.board_specific_setup	= zeus_mcp2515_setup,
-	.power_enable		= zeus_mcp2515_transceiver_enable,
 };
 
 static struct spi_board_info zeus_spi_board_info[] = {
@@ -516,6 +519,7 @@ static struct platform_device *zeus_devices[] __initdata = {
 	&zeus_leds_device,
 	&zeus_pcmcia_device,
 	&zeus_max6369_device,
+	&can_regulator_device,
 };
 
 /* AC'97 */
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 86e59c0..869bce7 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -18,7 +18,7 @@
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/gpio.h>
 
 #include <mach/pxa300.h>
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index d210c0f..9db2029 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -13,7 +13,7 @@ config REALVIEW_EB_A9MP
 	depends on MACH_REALVIEW_EB
 	select CPU_V7
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
@@ -26,7 +26,7 @@ config REALVIEW_EB_ARM11MP
 	select ARCH_HAS_BARRIERS if SMP
 	select CPU_V6K
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
@@ -48,7 +48,7 @@ config MACH_REALVIEW_PB11MP
 	select ARM_GIC
 	select CPU_V6K
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select HAVE_PATA_PLATFORM
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
@@ -92,7 +92,7 @@ config MACH_REALVIEW_PBX
 	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
 	select ARM_GIC
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select HAVE_PATA_PLATFORM
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
deleted file mode 100644
index 8cc372d..0000000
--- a/arch/arm/mach-realview/include/mach/debug-macro.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/* arch/arm/mach-realview/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifdef CONFIG_DEBUG_REALVIEW_STD_PORT
-#define DEBUG_LL_UART_OFFSET	0x00009000
-#elif defined(CONFIG_DEBUG_REALVIEW_PB1176_PORT)
-#define DEBUG_LL_UART_OFFSET	0x0010c000
-#endif
-
-#ifndef DEBUG_LL_UART_OFFSET
-#error "Unknown RealView platform"
-#endif
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #DEBUG_LL_UART_OFFSET
-		orr	\rv, \rp, #0xfb000000	@ virtual base
-		orr	\rp, \rp, #0x10000000	@ physical base
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index 25ee12b..cf073de 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -5,12 +5,13 @@ config ARCH_ROCKCHIP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_GIC
 	select CACHE_L2X0
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
-	select LOCAL_TIMERS if SMP
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select DW_APB_TIMER_OF
+	select ARM_GLOBAL_TIMER
+	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
 	help
 	  Support for Rockchip's Cortex-A9 Single-to-Quad-Core-SoCs
 	  containing the RK2928, RK30xx and RK31xx series.
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index 724d2d8..82c0b07 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -19,18 +19,10 @@
 #include <linux/init.h>
 #include <linux/of_platform.h>
 #include <linux/irqchip.h>
-#include <linux/dw_apb_timer.h>
-#include <linux/clk-provider.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/hardware/cache-l2x0.h>
 
-static void __init rockchip_timer_init(void)
-{
-	of_clk_init(NULL);
-	clocksource_of_init();
-}
-
 static void __init rockchip_dt_init(void)
 {
 	l2x0_of_init(0, ~0UL);
@@ -47,6 +39,5 @@ static const char * const rockchip_board_dt_compat[] = {
 
 DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)")
 	.init_machine	= rockchip_dt_init,
-	.init_time	= rockchip_timer_init,
 	.dt_compat	= rockchip_board_dt_compat,
 MACHINE_END
diff --git a/arch/arm/mach-rpc/include/mach/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S
deleted file mode 100644
index 6d28cc9..0000000
--- a/arch/arm/mach-rpc/include/mach/debug-macro.S
+++ /dev/null
@@ -1,23 +0,0 @@
-/* arch/arm/mach-rpc/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0x00010000
-		orr	\rp, \rp, #0x00000fe0
-		orr	\rv, \rp, #0xe0000000	@ virtual
-		orr	\rp, \rp, #0x03000000	@ physical
-		.endm
-
-#define UART_SHIFT	2
-#define FLOW_CONTROL
-#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 7791ac7..8f1d327 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -28,9 +28,9 @@ config CPU_S3C2410
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2410
 	select S3C2410_CLOCK
+	select S3C2410_DMA if S3C24XX_DMA
 	select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
 	select S3C2410_PM if PM
-	select SAMSUNG_HRT
 	select SAMSUNG_WDT_RESET
 	help
 	  Support for S3C2410 and S3C2410A family from the S3C24XX line
@@ -42,7 +42,6 @@ config CPU_S3C2412
 	select CPU_LLSERIAL_S3C2440
 	select S3C2412_DMA if S3C24XX_DMA
 	select S3C2412_PM if PM
-	select SAMSUNG_HRT
 	help
 	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
 
@@ -54,7 +53,6 @@ config CPU_S3C2416
 	select S3C2443_COMMON
 	select S3C2443_DMA if S3C24XX_DMA
 	select SAMSUNG_CLKSRC
-	select SAMSUNG_HRT
 	help
 	  Support for the S3C2416 SoC from the S3C24XX line
 
@@ -65,7 +63,6 @@ config CPU_S3C2440
 	select S3C2410_CLOCK
 	select S3C2410_PM if PM
 	select S3C2440_DMA if S3C24XX_DMA
-	select SAMSUNG_HRT
 	help
 	  Support for S3C2440 Samsung Mobile CPU based systems.
 
@@ -74,8 +71,8 @@ config CPU_S3C2442
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2440
 	select S3C2410_CLOCK
+	select S3C2410_DMA if S3C24XX_DMA
 	select S3C2410_PM if PM
-	select SAMSUNG_HRT
 	help
 	  Support for S3C2442 Samsung Mobile CPU based systems.
 
@@ -91,7 +88,6 @@ config CPU_S3C2443
 	select S3C2443_COMMON
 	select S3C2443_DMA if S3C24XX_DMA
 	select SAMSUNG_CLKSRC
-	select SAMSUNG_HRT
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
 
@@ -154,7 +150,6 @@ config S3C2410_DMA_DEBUG
 config S3C2410_DMA
 	bool
 	depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
-	default y if CPU_S3C2410 || CPU_S3C2442
 	help
 	  DMA device selection for S3C2410 and compatible CPUs
 
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c
index 5645536..d39d3c7 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2410.c
@@ -281,6 +281,5 @@ int __init s3c2410_baseclk_add(void)
 	       (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
 	       (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
 
-	s3c_pwmclk_init();
 	return 0;
 }
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2412.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c
index 2cc017d..11b3b28 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2412.c
@@ -484,22 +484,22 @@ static struct clk init_clocks_disable[] = {
 
 static struct clk init_clocks[] = {
 	{
-		.name		= "dma",
+		.name		= "dma.0",
 		.parent		= &clk_h,
 		.enable		= s3c2412_clkcon_enable,
 		.ctrlbit	= S3C2412_CLKCON_DMA0,
 	}, {
-		.name		= "dma",
+		.name		= "dma.1",
 		.parent		= &clk_h,
 		.enable		= s3c2412_clkcon_enable,
 		.ctrlbit	= S3C2412_CLKCON_DMA1,
 	}, {
-		.name		= "dma",
+		.name		= "dma.2",
 		.parent		= &clk_h,
 		.enable		= s3c2412_clkcon_enable,
 		.ctrlbit	= S3C2412_CLKCON_DMA2,
 	}, {
-		.name		= "dma",
+		.name		= "dma.3",
 		.parent		= &clk_h,
 		.enable		= s3c2412_clkcon_enable,
 		.ctrlbit	= S3C2412_CLKCON_DMA3,
@@ -757,6 +757,5 @@ int __init s3c2412_baseclk_add(void)
 	}
 
 	clkdev_add_table(s3c2412_clk_lookup, ARRAY_SIZE(s3c2412_clk_lookup));
-	s3c_pwmclk_init();
 	return 0;
 }
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c
index 036056ce..d421a72 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2416.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2416.c
@@ -168,6 +168,4 @@ void __init s3c2416_init_clocks(int xtal)
 	s3c24xx_register_clock(&hsmmc0_clk);
 	clkdev_add_table(s3c2416_clk_lookup, ARRAY_SIZE(s3c2416_clk_lookup));
 
-	s3c_pwmclk_init();
-
 }
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c
index 0a53051..76cd31f 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c
@@ -209,6 +209,4 @@ void __init s3c2443_init_clocks(int xtal)
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
-
-	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c
index f6b9f2e..65d3eef 100644
--- a/arch/arm/mach-s3c24xx/common-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/common-s3c2443.c
@@ -438,32 +438,32 @@ static struct clk init_clocks_off[] = {
 
 static struct clk init_clocks[] = {
 	{
-		.name		= "dma",
+		.name		= "dma.0",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA0,
 	}, {
-		.name		= "dma",
+		.name		= "dma.1",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA1,
 	}, {
-		.name		= "dma",
+		.name		= "dma.2",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA2,
 	}, {
-		.name		= "dma",
+		.name		= "dma.3",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA3,
 	}, {
-		.name		= "dma",
+		.name		= "dma.4",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA4,
 	}, {
-		.name		= "dma",
+		.name		= "dma.5",
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_DMA5,
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index c157103e..4adaa4b 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -27,9 +27,11 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
+#include <clocksource/samsung_pwm.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/platform_data/dma-s3c24xx.h>
 
 #include <mach/hardware.h>
 #include <mach/regs-clock.h>
@@ -43,12 +45,14 @@
 
 #include <mach/regs-gpio.h>
 #include <plat/regs-serial.h>
+#include <mach/dma.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/clock.h>
 #include <plat/cpu-freq.h>
 #include <plat/pll.h>
+#include <plat/pwm-core.h>
 
 #include "common.h"
 
@@ -216,6 +220,13 @@ static void s3c24xx_default_idle(void)
 		     S3C2410_CLKCON);
 }
 
+static struct samsung_pwm_variant s3c24xx_pwm_variant = {
+	.bits		= 16,
+	.div_base	= 1,
+	.has_tint_cstat	= false,
+	.tclk_mask	= (1 << 4),
+};
+
 void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
 {
 	arm_pm_idle = s3c24xx_default_idle;
@@ -232,6 +243,24 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
 	s3c24xx_init_cpu();
 
 	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+
+	samsung_pwm_set_platdata(&s3c24xx_pwm_variant);
+}
+
+void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+{
+	s3c24xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+	s3c24xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init samsung_timer_init(void)
+{
+	unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+		IRQ_TIMER0, IRQ_TIMER1, IRQ_TIMER2, IRQ_TIMER3, IRQ_TIMER4,
+	};
+
+	samsung_pwm_clocksource_init(S3C_VA_TIMER,
+					timer_irqs, &s3c24xx_pwm_variant);
 }
 
 /* Serial port registrations */
@@ -302,3 +331,207 @@ void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
 	clk_p.rate = pclk;
 	clk_f.rate = fclk;
 }
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
+	defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+static struct resource s3c2410_dma_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
+	[1] = DEFINE_RES_IRQ(IRQ_DMA0),
+	[2] = DEFINE_RES_IRQ(IRQ_DMA1),
+	[3] = DEFINE_RES_IRQ(IRQ_DMA2),
+	[4] = DEFINE_RES_IRQ(IRQ_DMA3),
+};
+#endif
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2442)
+static struct s3c24xx_dma_channel s3c2410_dma_channels[DMACH_MAX] = {
+	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), },
+	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), },
+	[DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) |
+						S3C24XX_DMA_CHANREQ(2, 2) |
+						S3C24XX_DMA_CHANREQ(1, 3),
+	},
+	[DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), },
+	[DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), },
+	[DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), },
+	[DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), },
+	[DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), },
+	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) |
+						 S3C24XX_DMA_CHANREQ(3, 2) |
+						 S3C24XX_DMA_CHANREQ(3, 3),
+	},
+	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) |
+						  S3C24XX_DMA_CHANREQ(1, 2),
+	},
+	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 2), },
+	[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), },
+	[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), },
+	[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), },
+	[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
+};
+
+static struct s3c24xx_dma_platdata s3c2410_dma_platdata = {
+	.num_phy_channels = 4,
+	.channels = s3c2410_dma_channels,
+	.num_channels = DMACH_MAX,
+};
+
+struct platform_device s3c2410_device_dma = {
+	.name		= "s3c2410-dma",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
+	.resource	= s3c2410_dma_resource,
+	.dev	= {
+		.platform_data	= &s3c2410_dma_platdata,
+	},
+};
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+static struct s3c24xx_dma_channel s3c2412_dma_channels[DMACH_MAX] = {
+	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 },
+	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 },
+	[DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 },
+	[DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 },
+	[DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 },
+	[DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 },
+	[DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 },
+	[DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 },
+	[DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 },
+	[DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 },
+	[DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 },
+	[DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 },
+	[DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 },
+	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 },
+	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 },
+	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 },
+	[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, 13 },
+	[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, 14 },
+	[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, 15 },
+	[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, 16 },
+};
+
+static struct s3c24xx_dma_platdata s3c2412_dma_platdata = {
+	.num_phy_channels = 4,
+	.channels = s3c2412_dma_channels,
+	.num_channels = DMACH_MAX,
+};
+
+struct platform_device s3c2412_device_dma = {
+	.name		= "s3c2412-dma",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
+	.resource	= s3c2410_dma_resource,
+	.dev	= {
+		.platform_data	= &s3c2412_dma_platdata,
+	},
+};
+#endif
+
+#if defined(CONFIG_CPU_S3C2440)
+static struct s3c24xx_dma_channel s3c2440_dma_channels[DMACH_MAX] = {
+	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), },
+	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), },
+	[DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) |
+						S3C24XX_DMA_CHANREQ(6, 1) |
+						S3C24XX_DMA_CHANREQ(2, 2) |
+						S3C24XX_DMA_CHANREQ(1, 3),
+	},
+	[DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), },
+	[DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), },
+	[DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), },
+	[DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), },
+	[DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), },
+	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) |
+						 S3C24XX_DMA_CHANREQ(3, 2) |
+						 S3C24XX_DMA_CHANREQ(3, 3),
+	},
+	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) |
+						  S3C24XX_DMA_CHANREQ(1, 2),
+	},
+	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 0) |
+						   S3C24XX_DMA_CHANREQ(0, 2),
+	},
+	[DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 0) |
+						  S3C24XX_DMA_CHANREQ(5, 2),
+	},
+	[DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 1) |
+						  S3C24XX_DMA_CHANREQ(6, 3),
+	},
+	[DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 2) |
+						  S3C24XX_DMA_CHANREQ(5, 3),
+	},
+	[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), },
+	[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), },
+	[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), },
+	[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
+};
+
+static struct s3c24xx_dma_platdata s3c2440_dma_platdata = {
+	.num_phy_channels = 4,
+	.channels = s3c2440_dma_channels,
+	.num_channels = DMACH_MAX,
+};
+
+struct platform_device s3c2440_device_dma = {
+	.name		= "s3c2410-dma",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
+	.resource	= s3c2410_dma_resource,
+	.dev	= {
+		.platform_data	= &s3c2440_dma_platdata,
+	},
+};
+#endif
+
+#if defined(CONFIG_CPUS_3C2443) || defined(CONFIG_CPU_S3C2416)
+static struct resource s3c2443_dma_resource[] = {
+	[0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
+	[1] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA0),
+	[2] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA1),
+	[3] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA2),
+	[4] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA3),
+	[5] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA4),
+	[6] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA5),
+};
+
+static struct s3c24xx_dma_channel s3c2443_dma_channels[DMACH_MAX] = {
+	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 },
+	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 },
+	[DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 },
+	[DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 },
+	[DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 },
+	[DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 },
+	[DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 },
+	[DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 },
+	[DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 },
+	[DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 },
+	[DMACH_UART3] = { S3C24XX_DMA_APB, true, 25 },
+	[DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 },
+	[DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 },
+	[DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 },
+	[DMACH_UART3_SRC2] = { S3C24XX_DMA_APB, true, 26 },
+	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 },
+	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 },
+	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 },
+	[DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, 28 },
+	[DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, 27 },
+	[DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, 29 },
+};
+
+static struct s3c24xx_dma_platdata s3c2443_dma_platdata = {
+	.num_phy_channels = 6,
+	.channels = s3c2443_dma_channels,
+	.num_channels = DMACH_MAX,
+};
+
+struct platform_device s3c2443_device_dma = {
+	.name		= "s3c2443-dma",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2443_dma_resource),
+	.resource	= s3c2443_dma_resource,
+	.dev	= {
+		.platform_data	= &s3c2443_dma_platdata,
+	},
+};
+#endif
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index 84b2806..e46c1041 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -109,4 +109,9 @@ extern void s3c2443_init_irq(void);
 
 extern struct syscore_ops s3c24xx_irq_syscore_ops;
 
+extern struct platform_device s3c2410_device_dma;
+extern struct platform_device s3c2412_device_dma;
+extern struct platform_device s3c2440_device_dma;
+extern struct platform_device s3c2443_device_dma;
+
 #endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/map.h b/arch/arm/mach-s3c24xx/include/mach/map.h
index 8ba381f..444793f 100644
--- a/arch/arm/mach-s3c24xx/include/mach/map.h
+++ b/arch/arm/mach-s3c24xx/include/mach/map.h
@@ -167,4 +167,6 @@
 #define S3C_PA_SPI0		S3C2443_PA_SPI0
 #define S3C_PA_SPI1		S3C2443_PA_SPI1
 
+#define SAMSUNG_PA_TIMER	S3C2410_PA_TIMER
+
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index af4334d..74dd479 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -512,7 +512,7 @@ static struct platform_pwm_backlight_data backlight_data = {
 static struct platform_device h1940_backlight = {
 	.name = "pwm-backlight",
 	.dev  = {
-		.parent = &s3c_device_timer[0].dev,
+		.parent = &samsung_device_pwm.dev,
 		.platform_data = &backlight_data,
 	},
 	.id   = -1,
@@ -632,7 +632,7 @@ static struct platform_device *h1940_devices[] __initdata = {
 	&h1940_device_bluetooth,
 	&s3c_device_sdi,
 	&s3c_device_rtc,
-	&s3c_device_timer[0],
+	&samsung_device_pwm,
 	&h1940_backlight,
 	&h1940_lcd_powerdev,
 	&s3c_device_adc,
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index a45fcd8..43c23e2 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -466,6 +466,7 @@ static struct platform_device *jive_devices[] __initdata = {
 	&jive_device_wm8750,
 	&s3c_device_nand,
 	&s3c_device_usbgadget,
+	&s3c2412_device_dma,
 };
 
 static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 44ca018e..206b1f7 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -530,7 +530,7 @@ static struct platform_pwm_backlight_data rx1950_backlight_data = {
 static struct platform_device rx1950_backlight = {
 	.name = "pwm-backlight",
 	.dev = {
-		.parent = &s3c_device_timer[0].dev,
+		.parent = &samsung_device_pwm.dev,
 		.platform_data = &rx1950_backlight_data,
 	},
 };
@@ -717,8 +717,7 @@ static struct platform_device *rx1950_devices[] __initdata = {
 	&s3c_device_sdi,
 	&s3c_device_adc,
 	&s3c_device_ts,
-	&s3c_device_timer[0],
-	&s3c_device_timer[1],
+	&samsung_device_pwm,
 	&rx1950_backlight,
 	&rx1950_device_gpiokeys,
 	&power_supply,
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
index 8146e92..c9d31ef 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -89,6 +89,7 @@ static struct platform_device *smdk2413_devices[] __initdata = {
 	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_usbgadget,
+	&s3c2412_device_dma,
 };
 
 static void __init smdk2413_fixup(struct tag *tags, char **cmdline,
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c
index cb46847..f88e672 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
@@ -215,6 +215,7 @@ static struct platform_device *smdk2416_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
 	&s3c_device_usb_hsudc,
+	&s3c2443_device_dma,
 };
 
 static void __init smdk2416_map_io(void)
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c
index 9435c3b..d9933fc 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2443.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c
@@ -115,6 +115,7 @@ static struct platform_device *smdk2443_devices[] __initdata = {
 #ifdef CONFIG_SND_SOC_SMDK2443_WM9710
 	&s3c_device_ac97,
 #endif
+	&s3c2443_device_dma,
 };
 
 static void __init smdk2443_map_io(void)
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index b665884..f7ec9c5 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -126,6 +126,7 @@ static struct platform_device *vstms_devices[] __initdata = {
 	&s3c_device_iis,
 	&s3c_device_rtc,
 	&s3c_device_nand,
+	&s3c2412_device_dma,
 };
 
 static void __init vstms_fixup(struct tag *tags, char **cmdline,
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 2057853..2cb8dc5 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -3,27 +3,16 @@
 #
 # Licensed under GPLv2
 
-# temporary until we can eliminate all drivers using it.
-config PLAT_S3C64XX
-	bool
-	depends on ARCH_S3C64XX
-	default y
-	select PM_GENERIC_DOMAINS
-	select SAMSUNG_WAKEMASK
-	help
-	  Base platform code for any Samsung S3C64XX device
-
+if ARCH_S3C64XX
 
 # Configuration options for the S3C6410 CPU
 
 config CPU_S3C6400
-	select SAMSUNG_HRT
 	bool
 	help
 	  Enable S3C6400 CPU support
 
 config CPU_S3C6410
-	select SAMSUNG_HRT
 	bool
 	help
 	  Enable S3C6410 CPU support
@@ -308,3 +297,21 @@ config MACH_WLF_CRAGG_6410
 	select SAMSUNG_GPIO_EXTRA128
 	help
 	  Machine support for the Wolfson Cragganmore S3C6410 variant.
+
+config MACH_S3C64XX_DT
+	bool "Samsung S3C6400/S3C6410 machine using Device Tree"
+	select CLKSRC_OF
+	select CPU_S3C6400
+	select CPU_S3C6410
+	select PINCTRL
+	select PINCTRL_S3C64XX
+	select USE_OF
+	help
+	  Machine support for Samsung S3C6400/S3C6410 machines with Device Tree
+	  enabled.
+	  Select this if a fdt blob is available for your S3C64XX SoC based
+	  board.
+	  Note: This is under development and not all peripherals can be
+	  supported with this machine file.
+
+endif
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 31d0c91..6faedcf 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -12,7 +12,7 @@ obj-				:=
 
 # Core
 
-obj-y				+= common.o clock.o
+obj-y				+= common.o
 
 # Core support
 
@@ -57,3 +57,4 @@ obj-$(CONFIG_MACH_SMARTQ7)		+= mach-smartq7.o
 obj-$(CONFIG_MACH_SMDK6400)		+= mach-smdk6400.o
 obj-$(CONFIG_MACH_SMDK6410)		+= mach-smdk6410.o
 obj-$(CONFIG_MACH_WLF_CRAGG_6410)	+= mach-crag6410.o mach-crag6410-module.o
+obj-$(CONFIG_MACH_S3C64XX_DT)		+= mach-s3c64xx-dt.o
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
deleted file mode 100644
index 8499415..0000000
--- a/arch/arm/mach-s3c64xx/clock.c
+++ /dev/null
@@ -1,1009 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/clock.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX Base clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pll.h>
-
-#include "regs-sys.h"
-
-/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
- * ext_xtal_mux for want of an actual name from the manual.
-*/
-
-static struct clk clk_ext_xtal_mux = {
-	.name		= "ext_xtal",
-};
-
-#define clk_fin_apll clk_ext_xtal_mux
-#define clk_fin_mpll clk_ext_xtal_mux
-#define clk_fin_epll clk_ext_xtal_mux
-
-#define clk_fout_mpll	clk_mpll
-#define clk_fout_epll	clk_epll
-
-struct clk clk_h2 = {
-	.name		= "hclk2",
-	.rate		= 0,
-};
-
-struct clk clk_27m = {
-	.name		= "clk_27m",
-	.rate		= 27000000,
-};
-
-static int clk_48m_ctrl(struct clk *clk, int enable)
-{
-	unsigned long flags;
-	u32 val;
-
-	/* can't rely on clock lock, this register has other usages */
-	local_irq_save(flags);
-
-	val = __raw_readl(S3C64XX_OTHERS);
-	if (enable)
-		val |= S3C64XX_OTHERS_USBMASK;
-	else
-		val &= ~S3C64XX_OTHERS_USBMASK;
-
-	__raw_writel(val, S3C64XX_OTHERS);
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-struct clk clk_48m = {
-	.name		= "clk_48m",
-	.rate		= 48000000,
-	.enable		= clk_48m_ctrl,
-};
-
-struct clk clk_xusbxti = {
-	.name		= "xusbxti",
-	.rate		= 48000000,
-};
-
-static int inline s3c64xx_gate(void __iomem *reg,
-				struct clk *clk,
-				int enable)
-{
-	unsigned int ctrlbit = clk->ctrlbit;
-	u32 con;
-
-	con = __raw_readl(reg);
-
-	if (enable)
-		con |= ctrlbit;
-	else
-		con &= ~ctrlbit;
-
-	__raw_writel(con, reg);
-	return 0;
-}
-
-static int s3c64xx_pclk_ctrl(struct clk *clk, int enable)
-{
-	return s3c64xx_gate(S3C_PCLK_GATE, clk, enable);
-}
-
-static int s3c64xx_hclk_ctrl(struct clk *clk, int enable)
-{
-	return s3c64xx_gate(S3C_HCLK_GATE, clk, enable);
-}
-
-int s3c64xx_sclk_ctrl(struct clk *clk, int enable)
-{
-	return s3c64xx_gate(S3C_SCLK_GATE, clk, enable);
-}
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "nand",
-		.parent		= &clk_h,
-	}, {
-		.name		= "rtc",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_RTC,
-	}, {
-		.name		= "adc",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_TSADC,
-	}, {
-		.name		= "i2c",
-		.devname        = "s3c2440-i2c.0",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_IIC,
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.1",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C6410_CLKCON_PCLK_I2C1,
-	}, {
-		.name		= "keypad",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_KEYPAD,
-	}, {
-		.name		= "spi",
-		.devname	= "s3c6410-spi.0",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_SPI0,
-	}, {
-		.name		= "spi",
-		.devname	= "s3c6410-spi.1",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_SPI1,
-	}, {
-		.name		= "48m",
-		.devname	= "s3c-sdhci.0",
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MMC0_48,
-	}, {
-		.name		= "48m",
-		.devname	= "s3c-sdhci.1",
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MMC1_48,
-	}, {
-		.name		= "48m",
-		.devname	= "s3c-sdhci.2",
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MMC2_48,
-	}, {
-		.name		= "ac97",
-		.parent		= &clk_p,
-		.ctrlbit	= S3C_CLKCON_PCLK_AC97,
-	}, {
-		.name		= "cfcon",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_IHOST,
-	}, {
-		.name		= "dma0",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_DMA0,
-	}, {
-		.name		= "dma1",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_DMA1,
-	}, {
-		.name		= "3dse",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_3DSE,
-	}, {
-		.name		= "hclk_secur",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_SECUR,
-	}, {
-		.name		= "sdma1",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_SDMA1,
-	}, {
-		.name		= "sdma0",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_SDMA0,
-	}, {
-		.name		= "hclk_jpeg",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_JPEG,
-	}, {
-		.name		= "camif",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_CAMIF,
-	}, {
-		.name		= "hclk_scaler",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_SCALER,
-	}, {
-		.name		= "2d",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_2D,
-	}, {
-		.name		= "tv",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_TV,
-	}, {
-		.name		= "post0",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_POST0,
-	}, {
-		.name		= "rot",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_ROT,
-	}, {
-		.name		= "hclk_mfc",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_MFC,
-	}, {
-		.name		= "pclk_mfc",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_MFC,
-	}, {
-		.name		= "dac27",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_DAC27,
-	}, {
-		.name		= "tv27",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_TV27,
-	}, {
-		.name		= "scaler27",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_SCALER27,
-	}, {
-		.name		= "sclk_scaler",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_SCALER,
-	}, {
-		.name		= "post0_27",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_POST0_27,
-	}, {
-		.name		= "secur",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_SECUR,
-	}, {
-		.name		= "sclk_mfc",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MFC,
-	}, {
-		.name		= "sclk_jpeg",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_JPEG,
-	},
-};
-
-static struct clk clk_48m_spi0 = {
-	.name		= "spi_48m",
-	.devname	= "s3c6410-spi.0",
-	.parent		= &clk_48m,
-	.enable		= s3c64xx_sclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_SCLK_SPI0_48,
-};
-
-static struct clk clk_48m_spi1 = {
-	.name		= "spi_48m",
-	.devname	= "s3c6410-spi.1",
-	.parent		= &clk_48m,
-	.enable		= s3c64xx_sclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_SCLK_SPI1_48,
-};
-
-static struct clk clk_i2s0 = {
-	.name		= "iis",
-	.devname	= "samsung-i2s.0",
-	.parent		= &clk_p,
-	.enable		= s3c64xx_pclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_PCLK_IIS0,
-};
-
-static struct clk clk_i2s1 = {
-	.name		= "iis",
-	.devname	= "samsung-i2s.1",
-	.parent		= &clk_p,
-	.enable		= s3c64xx_pclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_PCLK_IIS1,
-};
-
-#ifdef CONFIG_CPU_S3C6410
-static struct clk clk_i2s2 = {
-	.name		= "iis",
-	.devname	= "samsung-i2s.2",
-	.parent		= &clk_p,
-	.enable		= s3c64xx_pclk_ctrl,
-	.ctrlbit	= S3C6410_CLKCON_PCLK_IIS2,
-};
-#endif
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "lcd",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_LCD,
-	}, {
-		.name		= "gpio",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_GPIO,
-	}, {
-		.name		= "usb-host",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_UHOST,
-	}, {
-		.name		= "otg",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_USB,
-	}, {
-		.name		= "timers",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_PWM,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.0",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART0,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.1",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART1,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.2",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART2,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.3",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART3,
-	}, {
-		.name		= "watchdog",
-		.parent		= &clk_p,
-		.ctrlbit	= S3C_CLKCON_PCLK_WDT,
-	},
-};
-
-static struct clk clk_hsmmc0 = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.0",
-	.parent		= &clk_h,
-	.enable		= s3c64xx_hclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_HCLK_HSMMC0,
-};
-
-static struct clk clk_hsmmc1 = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.1",
-	.parent		= &clk_h,
-	.enable		= s3c64xx_hclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_HCLK_HSMMC1,
-};
-
-static struct clk clk_hsmmc2 = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.2",
-	.parent		= &clk_h,
-	.enable		= s3c64xx_hclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_HCLK_HSMMC2,
-};
-
-static struct clk clk_fout_apll = {
-	.name		= "fout_apll",
-};
-
-static struct clk *clk_src_apll_list[] = {
-	[0] = &clk_fin_apll,
-	[1] = &clk_fout_apll,
-};
-
-static struct clksrc_sources clk_src_apll = {
-	.sources	= clk_src_apll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
-};
-
-static struct clksrc_clk clk_mout_apll = {
-	.clk	= {
-		.name		= "mout_apll",
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 0, .size = 1  },
-	.sources	= &clk_src_apll,
-};
-
-static struct clk *clk_src_epll_list[] = {
-	[0] = &clk_fin_epll,
-	[1] = &clk_fout_epll,
-};
-
-static struct clksrc_sources clk_src_epll = {
-	.sources	= clk_src_epll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
-};
-
-static struct clksrc_clk clk_mout_epll = {
-	.clk	= {
-		.name		= "mout_epll",
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 2, .size = 1  },
-	.sources	= &clk_src_epll,
-};
-
-static struct clk *clk_src_mpll_list[] = {
-	[0] = &clk_fin_mpll,
-	[1] = &clk_fout_mpll,
-};
-
-static struct clksrc_sources clk_src_mpll = {
-	.sources	= clk_src_mpll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
-};
-
-static struct clksrc_clk clk_mout_mpll = {
-	.clk = {
-		.name		= "mout_mpll",
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 1, .size = 1  },
-	.sources	= &clk_src_mpll,
-};
-
-static unsigned int armclk_mask;
-
-static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	u32 clkdiv;
-
-	/* divisor mask starts at bit0, so no need to shift */
-	clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask;
-
-	return rate / (clkdiv + 1);
-}
-
-static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
-						unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	u32 div;
-
-	if (parent < rate)
-		return parent;
-
-	div = (parent / rate) - 1;
-	if (div > armclk_mask)
-		div = armclk_mask;
-
-	return parent / (div + 1);
-}
-
-static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	u32 div;
-	u32 val;
-
-	if (rate < parent / (armclk_mask + 1))
-		return -EINVAL;
-
-	rate = clk_round_rate(clk, rate);
-	div = clk_get_rate(clk->parent) / rate;
-
-	val = __raw_readl(S3C_CLK_DIV0);
-	val &= ~armclk_mask;
-	val |= (div - 1);
-	__raw_writel(val, S3C_CLK_DIV0);
-
-	return 0;
-
-}
-
-static struct clk clk_arm = {
-	.name		= "armclk",
-	.parent		= &clk_mout_apll.clk,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c64xx_clk_arm_get_rate,
-		.set_rate	= s3c64xx_clk_arm_set_rate,
-		.round_rate	= s3c64xx_clk_arm_round_rate,
-	},
-};
-
-static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK)
-		rate /= 2;
-
-	return rate;
-}
-
-static struct clk_ops clk_dout_ops = {
-	.get_rate	= s3c64xx_clk_doutmpll_get_rate,
-};
-
-static struct clk clk_dout_mpll = {
-	.name		= "dout_mpll",
-	.parent		= &clk_mout_mpll.clk,
-	.ops		= &clk_dout_ops,
-};
-
-static struct clk *clkset_spi_mmc_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-	&clk_27m,
-};
-
-static struct clksrc_sources clkset_spi_mmc = {
-	.sources	= clkset_spi_mmc_list,
-	.nr_sources	= ARRAY_SIZE(clkset_spi_mmc_list),
-};
-
-static struct clk *clkset_irda_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	NULL,
-	&clk_27m,
-};
-
-static struct clksrc_sources clkset_irda = {
-	.sources	= clkset_irda_list,
-	.nr_sources	= ARRAY_SIZE(clkset_irda_list),
-};
-
-static struct clk *clkset_uart_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	NULL,
-	NULL
-};
-
-static struct clksrc_sources clkset_uart = {
-	.sources	= clkset_uart_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_uhost_list[] = {
-	&clk_48m,
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-};
-
-static struct clksrc_sources clkset_uhost = {
-	.sources	= clkset_uhost_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uhost_list),
-};
-
-/* The peripheral clocks are all controlled via clocksource followed
- * by an optional divider and gate stage. We currently roll this into
- * one clock which hides the intermediate clock from the mux.
- *
- * Note, the JPEG clock can only be an even divider...
- *
- * The scaler and LCD clocks depend on the S3C64XX version, and also
- * have a common parent divisor so are not included here.
- */
-
-/* clocks that feed other parts of the clock source tree */
-
-static struct clk clk_iis_cd0 = {
-	.name		= "iis_cdclk0",
-};
-
-static struct clk clk_iis_cd1 = {
-	.name		= "iis_cdclk1",
-};
-
-static struct clk clk_iisv4_cd = {
-	.name		= "iis_cdclk_v4",
-};
-
-static struct clk clk_pcm_cd = {
-	.name		= "pcm_cdclk",
-};
-
-static struct clk *clkset_audio0_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_dout_mpll,
-	[2] = &clk_fin_epll,
-	[3] = &clk_iis_cd0,
-	[4] = &clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio0 = {
-	.sources	= clkset_audio0_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio0_list),
-};
-
-static struct clk *clkset_audio1_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_dout_mpll,
-	[2] = &clk_fin_epll,
-	[3] = &clk_iis_cd1,
-	[4] = &clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio1 = {
-	.sources	= clkset_audio1_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio1_list),
-};
-
-#ifdef CONFIG_CPU_S3C6410
-static struct clk *clkset_audio2_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_dout_mpll,
-	[2] = &clk_fin_epll,
-	[3] = &clk_iisv4_cd,
-	[4] = &clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio2 = {
-	.sources	= clkset_audio2_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio2_list),
-};
-#endif
-
-static struct clksrc_clk clksrcs[] = {
-	{
-		.clk	= {
-			.name		= "usb-bus-host",
-			.ctrlbit        = S3C_CLKCON_SCLK_UHOST,
-			.enable		= s3c64xx_sclk_ctrl,
-		},
-		.reg_src 	= { .reg = S3C_CLK_SRC, .shift = 5, .size = 2  },
-		.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 20, .size = 4  },
-		.sources	= &clkset_uhost,
-	}, {
-		.clk	= {
-			.name		= "irda-bus",
-			.ctrlbit        = S3C_CLKCON_SCLK_IRDA,
-			.enable		= s3c64xx_sclk_ctrl,
-		},
-		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 24, .size = 2  },
-		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 20, .size = 4  },
-		.sources	= &clkset_irda,
-	}, {
-		.clk	= {
-			.name		= "camera",
-			.ctrlbit        = S3C_CLKCON_SCLK_CAM,
-			.enable		= s3c64xx_sclk_ctrl,
-			.parent		= &clk_h2,
-		},
-		.reg_div	= { .reg = S3C_CLK_DIV0, .shift = 20, .size = 4  },
-	},
-};
-
-/* Where does UCLK0 come from? */
-static struct clksrc_clk clk_sclk_uclk = {
-	.clk	= {
-		.name		= "uclk1",
-		.ctrlbit        = S3C_CLKCON_SCLK_UART,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 13, .size = 1  },
-	.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4  },
-	.sources	= &clkset_uart,
-};
-
-static struct clksrc_clk clk_sclk_mmc0 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.devname	= "s3c-sdhci.0",
-		.ctrlbit        = S3C_CLKCON_SCLK_MMC0,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 18, .size = 2  },
-	.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4  },
-	.sources	= &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_mmc1 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.devname	= "s3c-sdhci.1",
-		.ctrlbit        = S3C_CLKCON_SCLK_MMC1,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 20, .size = 2  },
-	.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4  },
-	.sources	= &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_mmc2 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.devname	= "s3c-sdhci.2",
-		.ctrlbit        = S3C_CLKCON_SCLK_MMC2,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 22, .size = 2  },
-	.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4  },
-	.sources	= &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_spi0 = {
-	.clk	= {
-		.name		= "spi-bus",
-		.devname	= "s3c6410-spi.0",
-		.ctrlbit	= S3C_CLKCON_SCLK_SPI0,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src = { .reg = S3C_CLK_SRC, .shift = 14, .size = 2 },
-	.reg_div = { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4 },
-	.sources = &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_spi1 = {
-	.clk	= {
-		.name		= "spi-bus",
-		.devname	= "s3c6410-spi.1",
-		.ctrlbit	= S3C_CLKCON_SCLK_SPI1,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src = { .reg = S3C_CLK_SRC, .shift = 16, .size = 2 },
-	.reg_div = { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4 },
-	.sources = &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_audio_bus0 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.devname	= "samsung-i2s.0",
-		.ctrlbit	= S3C_CLKCON_SCLK_AUDIO0,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 7, .size = 3  },
-	.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 8, .size = 4  },
-	.sources	= &clkset_audio0,
-};
-
-static struct clksrc_clk clk_audio_bus1 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.devname	= "samsung-i2s.1",
-		.ctrlbit	= S3C_CLKCON_SCLK_AUDIO1,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 10, .size = 3  },
-	.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4  },
-	.sources	= &clkset_audio1,
-};
-
-#ifdef CONFIG_CPU_S3C6410
-static struct clksrc_clk clk_audio_bus2 = {
-	.clk	= {
-		.name		= "audio-bus",
-		.devname	= "samsung-i2s.2",
-		.ctrlbit	= S3C6410_CLKCON_SCLK_AUDIO2,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C6410_CLK_SRC2, .shift = 0, .size = 3  },
-	.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 24, .size = 4  },
-	.sources	= &clkset_audio2,
-};
-#endif
-/* Clock initialisation code */
-
-static struct clksrc_clk *init_parents[] = {
-	&clk_mout_apll,
-	&clk_mout_epll,
-	&clk_mout_mpll,
-};
-
-static struct clksrc_clk *clksrc_cdev[] = {
-	&clk_sclk_uclk,
-	&clk_sclk_mmc0,
-	&clk_sclk_mmc1,
-	&clk_sclk_mmc2,
-	&clk_sclk_spi0,
-	&clk_sclk_spi1,
-	&clk_audio_bus0,
-	&clk_audio_bus1,
-};
-
-static struct clk *clk_cdev[] = {
-	&clk_hsmmc0,
-	&clk_hsmmc1,
-	&clk_hsmmc2,
-	&clk_48m_spi0,
-	&clk_48m_spi1,
-	&clk_i2s0,
-	&clk_i2s1,
-};
-
-static struct clk_lookup s3c64xx_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
-	CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
-	CLKDEV_INIT("s3c6410-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
-	CLKDEV_INIT("s3c6410-spi.0", "spi_busclk2", &clk_48m_spi0),
-	CLKDEV_INIT("s3c6410-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
-	CLKDEV_INIT("s3c6410-spi.1", "spi_busclk2", &clk_48m_spi1),
-	CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0),
-	CLKDEV_INIT("samsung-i2s.0", "i2s_opclk1", &clk_audio_bus0.clk),
-	CLKDEV_INIT("samsung-i2s.1", "i2s_opclk0", &clk_i2s1),
-	CLKDEV_INIT("samsung-i2s.1", "i2s_opclk1", &clk_audio_bus1.clk),
-#ifdef CONFIG_CPU_S3C6410
-	CLKDEV_INIT("samsung-i2s.2", "i2s_opclk0", &clk_i2s2),
-	CLKDEV_INIT("samsung-i2s.2", "i2s_opclk1", &clk_audio_bus2.clk),
-#endif
-};
-
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
-void __init_or_cpufreq s3c64xx_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long hclk2;
-	unsigned long pclk;
-	unsigned long epll;
-	unsigned long apll;
-	unsigned long mpll;
-	unsigned int ptr;
-	u32 clkdiv0;
-
-	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
-	clkdiv0 = __raw_readl(S3C_CLK_DIV0);
-	printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0);
-
-	xtal_clk = clk_get(NULL, "xtal");
-	BUG_ON(IS_ERR(xtal_clk));
-
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
-	/* For now assume the mux always selects the crystal */
-	clk_ext_xtal_mux.parent = xtal_clk;
-
-	epll = s3c_get_pll6553x(xtal, __raw_readl(S3C_EPLL_CON0),
-				__raw_readl(S3C_EPLL_CON1));
-	mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
-	apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
-
-	fclk = mpll;
-
-	printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
-	       apll, mpll, epll);
-
-	if(__raw_readl(S3C64XX_OTHERS) & S3C64XX_OTHERS_SYNCMUXSEL)
-		/* Synchronous mode */
-		hclk2 = apll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
-	else
-		/* Asynchronous mode */
-		hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
-
-	hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
-	pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
-
-	printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n",
-	       hclk2, hclk, pclk);
-
-	clk_fout_mpll.rate = mpll;
-	clk_fout_epll.rate = epll;
-	clk_fout_apll.rate = apll;
-
-	clk_h2.rate = hclk2;
-	clk_h.rate = hclk;
-	clk_p.rate = pclk;
-	clk_f.rate = fclk;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
-		s3c_set_clksrc(init_parents[ptr], true);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_set_clksrc(&clksrcs[ptr], true);
-}
-
-static struct clk *clks1[] __initdata = {
-	&clk_ext_xtal_mux,
-	&clk_iis_cd0,
-	&clk_iis_cd1,
-	&clk_iisv4_cd,
-	&clk_pcm_cd,
-	&clk_mout_epll.clk,
-	&clk_mout_mpll.clk,
-	&clk_dout_mpll,
-	&clk_arm,
-};
-
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_epll,
-	&clk_27m,
-	&clk_48m,
-	&clk_h2,
-	&clk_xusbxti,
-};
-
-/**
- * s3c64xx_register_clocks - register clocks for s3c6400 and s3c6410
- * @xtal: The rate for the clock crystal feeding the PLLs.
- * @armclk_divlimit: Divisor mask for ARMCLK.
- *
- * Register the clocks for the S3C6400 and S3C6410 SoC range, such
- * as ARMCLK as well as the necessary parent clocks.
- *
- * This call does not setup the clocks, which is left to the
- * s3c64xx_setup_clocks() call which may be needed by the cpufreq
- * or resume code to re-set the clocks if the bootloader has changed
- * them.
- */
-void __init s3c64xx_register_clocks(unsigned long xtal, 
-				    unsigned armclk_divlimit)
-{
-	unsigned int cnt;
-
-	armclk_mask = armclk_divlimit;
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
-	s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
-	for (cnt = 0; cnt < ARRAY_SIZE(clk_cdev); cnt++)
-		s3c_disable_clocks(clk_cdev[cnt], 1);
-
-	s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1));
-	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-	for (cnt = 0; cnt < ARRAY_SIZE(clksrc_cdev); cnt++)
-		s3c_register_clksrc(clksrc_cdev[cnt], 1);
-	clkdev_add_table(s3c64xx_clk_lookup, ARRAY_SIZE(s3c64xx_clk_lookup));
-
-	s3c_pwmclk_init();
-}
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index 3f62e46..7a3ce4c 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -14,9 +14,14 @@
  * published by the Free Software Foundation.
  */
 
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/clk-provider.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
@@ -27,6 +32,7 @@
 #include <linux/irq.h>
 #include <linux/gpio.h>
 #include <linux/irqchip/arm-vic.h>
+#include <clocksource/samsung_pwm.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -37,18 +43,30 @@
 #include <mach/regs-gpio.h>
 
 #include <plat/cpu.h>
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
 #include <plat/gpio-cfg.h>
 #include <plat/irq-uart.h>
-#include <plat/irq-vic-timer.h>
+#include <plat/pwm-core.h>
 #include <plat/regs-irqtype.h>
 #include <plat/regs-serial.h>
 #include <plat/watchdog-reset.h>
 
 #include "common.h"
 
+/* External clock frequency */
+static unsigned long xtal_f = 12000000, xusbxti_f = 48000000;
+
+void __init s3c64xx_set_xtal_freq(unsigned long freq)
+{
+	xtal_f = freq;
+}
+
+void __init s3c64xx_set_xusbxti_freq(unsigned long freq)
+{
+	xusbxti_f = freq;
+}
+
 /* uart registration process */
 
 static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
@@ -66,7 +84,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= S3C6400_CPU_ID,
 		.idmask		= S3C64XX_CPU_MASK,
 		.map_io		= s3c6400_map_io,
-		.init_clocks	= s3c6400_init_clocks,
 		.init_uarts	= s3c64xx_init_uarts,
 		.init		= s3c6400_init,
 		.name		= name_s3c6400,
@@ -74,7 +91,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= S3C6410_CPU_ID,
 		.idmask		= S3C64XX_CPU_MASK,
 		.map_io		= s3c6410_map_io,
-		.init_clocks	= s3c6410_init_clocks,
 		.init_uarts	= s3c64xx_init_uarts,
 		.init		= s3c6410_init,
 		.name		= name_s3c6410,
@@ -149,6 +165,30 @@ static struct device s3c64xx_dev = {
 	.bus	= &s3c64xx_subsys,
 };
 
+static struct samsung_pwm_variant s3c64xx_pwm_variant = {
+	.bits		= 32,
+	.div_base	= 0,
+	.has_tint_cstat	= true,
+	.tclk_mask	= (1 << 7) | (1 << 6) | (1 << 5),
+};
+
+void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+{
+	s3c64xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+	s3c64xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init samsung_timer_init(void)
+{
+	unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+		IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
+		IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
+	};
+
+	samsung_pwm_clocksource_init(S3C_VA_TIMER,
+					timer_irqs, &s3c64xx_pwm_variant);
+}
+
 /* read cpu identification code */
 
 void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
@@ -161,10 +201,16 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
 	s3c64xx_init_cpu();
 
 	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+
+	samsung_pwm_set_platdata(&s3c64xx_pwm_variant);
 }
 
 static __init int s3c64xx_dev_init(void)
 {
+	/* Not applicable when using DT. */
+	if (of_have_populated_dt())
+		return 0;
+
 	subsys_system_register(&s3c64xx_subsys, NULL);
 	return device_register(&s3c64xx_dev);
 }
@@ -186,8 +232,10 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
 {
 	/*
 	 * FIXME: there is no better place to put this at the moment
-	 * (samsung_wdt_reset_init needs clocks)
+	 * (s3c64xx_clk_init needs ioremap and must happen before init_time
+	 * samsung_wdt_reset_init needs clocks)
 	 */
+	s3c64xx_clk_init(NULL, xtal_f, xusbxti_f, soc_is_s3c6400(), S3C_VA_SYS);
 	samsung_wdt_reset_init(S3C_VA_WATCHDOG);
 
 	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
@@ -195,9 +243,6 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
 	/* initialise the pair of VICs */
 	vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME);
 	vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME);
-
-	/* add the timer sub-irqs */
-	s3c_init_vic_timer_irq(5, IRQ_TIMER0);
 }
 
 #define eint_offset(irq)	((irq) - IRQ_EINT(0))
@@ -367,6 +412,10 @@ static int __init s3c64xx_init_irq_eint(void)
 {
 	int irq;
 
+	/* On DT-enabled systems EINTs are handled by pinctrl-s3c64xx driver. */
+	if (of_have_populated_dt())
+		return -ENODEV;
+
 	for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
 		irq_set_chip_and_handler(irq, &s3c_irq_eint, handle_level_irq);
 		irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq));
diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h
index e8f990b..bd3bd56 100644
--- a/arch/arm/mach-s3c64xx/common.h
+++ b/arch/arm/mach-s3c64xx/common.h
@@ -22,21 +22,21 @@
 void s3c64xx_init_irq(u32 vic0, u32 vic1);
 void s3c64xx_init_io(struct map_desc *mach_desc, int size);
 
-void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
-void s3c64xx_setup_clocks(void);
-
 void s3c64xx_restart(enum reboot_mode mode, const char *cmd);
 void s3c64xx_init_late(void);
 
+void s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,
+	unsigned long xusbxti_f, bool is_s3c6400, void __iomem *reg_base);
+void s3c64xx_set_xtal_freq(unsigned long freq);
+void s3c64xx_set_xusbxti_freq(unsigned long freq);
+
 #ifdef CONFIG_CPU_S3C6400
 
 extern  int s3c6400_init(void);
 extern void s3c6400_init_irq(void);
 extern void s3c6400_map_io(void);
-extern void s3c6400_init_clocks(int xtal);
 
 #else
-#define s3c6400_init_clocks NULL
 #define s3c6400_map_io NULL
 #define s3c6400_init NULL
 #endif
@@ -46,10 +46,8 @@ extern void s3c6400_init_clocks(int xtal);
 extern  int s3c6410_init(void);
 extern void s3c6410_init_irq(void);
 extern void s3c6410_map_io(void);
-extern void s3c6410_init_clocks(int xtal);
 
 #else
-#define s3c6410_init_clocks NULL
 #define s3c6410_map_io NULL
 #define s3c6410_init NULL
 #endif
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index 759846c..7e22c21 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -12,6 +12,10 @@
  * published by the Free Software Foundation.
 */
 
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
@@ -24,6 +28,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/amba/pl080.h>
+#include <linux/of.h>
 
 #include <mach/dma.h>
 #include <mach/map.h>
@@ -677,7 +682,7 @@ static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
 		goto err_map;
 	}
 
-	clk_enable(dmac->clk);
+	clk_prepare_enable(dmac->clk);
 
 	dmac->regs = regs;
 	dmac->chanbase = chbase;
@@ -711,7 +716,7 @@ static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
 	return 0;
 
 err_clk:
-	clk_disable(dmac->clk);
+	clk_disable_unprepare(dmac->clk);
 	clk_put(dmac->clk);
 err_map:
 	iounmap(regs);
@@ -726,6 +731,10 @@ static int __init s3c64xx_dma_init(void)
 {
 	int ret;
 
+	/* This driver is not supported when booting with device tree. */
+	if (of_have_populated_dt())
+		return -ENODEV;
+
 	printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
 
 	dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0);
diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h
index 96d60e0..67bbd1d 100644
--- a/arch/arm/mach-s3c64xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h
@@ -107,14 +107,6 @@
 #define IRQ_TC			IRQ_PENDN
 #define IRQ_ADC			S3C64XX_IRQ_VIC1(31)
 
-#define S3C64XX_TIMER_IRQ(x)	S3C_IRQ(64 + (x))
-
-#define IRQ_TIMER0		S3C64XX_TIMER_IRQ(0)
-#define IRQ_TIMER1		S3C64XX_TIMER_IRQ(1)
-#define IRQ_TIMER2		S3C64XX_TIMER_IRQ(2)
-#define IRQ_TIMER3		S3C64XX_TIMER_IRQ(3)
-#define IRQ_TIMER4		S3C64XX_TIMER_IRQ(4)
-
 /* compatibility for device defines */
 
 #define IRQ_IIC1		IRQ_S3C6410_IIC1
diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
index 8e2097b..f55ccb1 100644
--- a/arch/arm/mach-s3c64xx/include/mach/map.h
+++ b/arch/arm/mach-s3c64xx/include/mach/map.h
@@ -121,5 +121,6 @@
 #define SAMSUNG_PA_ADC		S3C64XX_PA_ADC
 #define SAMSUNG_PA_CFCON	S3C64XX_PA_CFCON
 #define SAMSUNG_PA_KEYPAD	S3C64XX_PA_KEYPAD
+#define SAMSUNG_PA_TIMER	S3C64XX_PA_TIMER
 
 #endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
index 05332b9..4f44aac 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
@@ -15,145 +15,21 @@
 #ifndef __PLAT_REGS_CLOCK_H
 #define __PLAT_REGS_CLOCK_H __FILE__
 
+/*
+ * FIXME: Remove remaining definitions
+ */
+
 #define S3C_CLKREG(x)		(S3C_VA_SYS + (x))
 
-#define S3C_APLL_LOCK		S3C_CLKREG(0x00)
-#define S3C_MPLL_LOCK		S3C_CLKREG(0x04)
-#define S3C_EPLL_LOCK		S3C_CLKREG(0x08)
-#define S3C_APLL_CON		S3C_CLKREG(0x0C)
-#define S3C_MPLL_CON		S3C_CLKREG(0x10)
-#define S3C_EPLL_CON0		S3C_CLKREG(0x14)
-#define S3C_EPLL_CON1		S3C_CLKREG(0x18)
-#define S3C_CLK_SRC		S3C_CLKREG(0x1C)
-#define S3C_CLK_DIV0		S3C_CLKREG(0x20)
-#define S3C_CLK_DIV1		S3C_CLKREG(0x24)
-#define S3C_CLK_DIV2		S3C_CLKREG(0x28)
-#define S3C_CLK_OUT		S3C_CLKREG(0x2C)
-#define S3C_HCLK_GATE		S3C_CLKREG(0x30)
 #define S3C_PCLK_GATE		S3C_CLKREG(0x34)
-#define S3C_SCLK_GATE		S3C_CLKREG(0x38)
-#define S3C_MEM0_GATE		S3C_CLKREG(0x3C)
 #define S3C6410_CLK_SRC2	S3C_CLKREG(0x10C)
 #define S3C_MEM_SYS_CFG		S3C_CLKREG(0x120)
 
-/* CLKDIV0 */
-#define S3C6400_CLKDIV0_PCLK_MASK	(0xf << 12)
-#define S3C6400_CLKDIV0_PCLK_SHIFT	(12)
-#define S3C6400_CLKDIV0_HCLK2_MASK	(0x7 << 9)
-#define S3C6400_CLKDIV0_HCLK2_SHIFT	(9)
-#define S3C6400_CLKDIV0_HCLK_MASK	(0x1 << 8)
-#define S3C6400_CLKDIV0_HCLK_SHIFT	(8)
-#define S3C6400_CLKDIV0_MPLL_MASK	(0x1 << 4)
-#define S3C6400_CLKDIV0_MPLL_SHIFT	(4)
-
-#define S3C6400_CLKDIV0_ARM_MASK	(0x7 << 0)
-#define S3C6410_CLKDIV0_ARM_MASK	(0xf << 0)
-#define S3C6400_CLKDIV0_ARM_SHIFT	(0)
-
-/* HCLK GATE Registers */
-#define S3C_CLKCON_HCLK_3DSE	(1<<31)
-#define S3C_CLKCON_HCLK_UHOST	(1<<29)
-#define S3C_CLKCON_HCLK_SECUR	(1<<28)
-#define S3C_CLKCON_HCLK_SDMA1	(1<<27)
-#define S3C_CLKCON_HCLK_SDMA0	(1<<26)
-#define S3C_CLKCON_HCLK_IROM	(1<<25)
-#define S3C_CLKCON_HCLK_DDR1	(1<<24)
-#define S3C_CLKCON_HCLK_DDR0	(1<<23)
-#define S3C_CLKCON_HCLK_MEM1	(1<<22)
-#define S3C_CLKCON_HCLK_MEM0	(1<<21)
-#define S3C_CLKCON_HCLK_USB	(1<<20)
-#define S3C_CLKCON_HCLK_HSMMC2	(1<<19)
-#define S3C_CLKCON_HCLK_HSMMC1	(1<<18)
-#define S3C_CLKCON_HCLK_HSMMC0	(1<<17)
-#define S3C_CLKCON_HCLK_MDP	(1<<16)
-#define S3C_CLKCON_HCLK_DHOST	(1<<15)
-#define S3C_CLKCON_HCLK_IHOST	(1<<14)
-#define S3C_CLKCON_HCLK_DMA1	(1<<13)
-#define S3C_CLKCON_HCLK_DMA0	(1<<12)
-#define S3C_CLKCON_HCLK_JPEG	(1<<11)
-#define S3C_CLKCON_HCLK_CAMIF	(1<<10)
-#define S3C_CLKCON_HCLK_SCALER	(1<<9)
-#define S3C_CLKCON_HCLK_2D	(1<<8)
-#define S3C_CLKCON_HCLK_TV	(1<<7)
-#define S3C_CLKCON_HCLK_POST0	(1<<5)
-#define S3C_CLKCON_HCLK_ROT	(1<<4)
-#define S3C_CLKCON_HCLK_LCD	(1<<3)
-#define S3C_CLKCON_HCLK_TZIC	(1<<2)
-#define S3C_CLKCON_HCLK_INTC	(1<<1)
-#define S3C_CLKCON_HCLK_MFC	(1<<0)
-
 /* PCLK GATE Registers */
-#define S3C6410_CLKCON_PCLK_I2C1	(1<<27)
-#define S3C6410_CLKCON_PCLK_IIS2	(1<<26)
-#define S3C_CLKCON_PCLK_SKEY		(1<<24)
-#define S3C_CLKCON_PCLK_CHIPID		(1<<23)
-#define S3C_CLKCON_PCLK_SPI1		(1<<22)
-#define S3C_CLKCON_PCLK_SPI0		(1<<21)
-#define S3C_CLKCON_PCLK_HSIRX		(1<<20)
-#define S3C_CLKCON_PCLK_HSITX		(1<<19)
-#define S3C_CLKCON_PCLK_GPIO		(1<<18)
-#define S3C_CLKCON_PCLK_IIC		(1<<17)
-#define S3C_CLKCON_PCLK_IIS1		(1<<16)
-#define S3C_CLKCON_PCLK_IIS0		(1<<15)
-#define S3C_CLKCON_PCLK_AC97		(1<<14)
-#define S3C_CLKCON_PCLK_TZPC		(1<<13)
-#define S3C_CLKCON_PCLK_TSADC		(1<<12)
-#define S3C_CLKCON_PCLK_KEYPAD		(1<<11)
-#define S3C_CLKCON_PCLK_IRDA		(1<<10)
-#define S3C_CLKCON_PCLK_PCM1		(1<<9)
-#define S3C_CLKCON_PCLK_PCM0		(1<<8)
-#define S3C_CLKCON_PCLK_PWM		(1<<7)
-#define S3C_CLKCON_PCLK_RTC		(1<<6)
-#define S3C_CLKCON_PCLK_WDT		(1<<5)
 #define S3C_CLKCON_PCLK_UART3		(1<<4)
 #define S3C_CLKCON_PCLK_UART2		(1<<3)
 #define S3C_CLKCON_PCLK_UART1		(1<<2)
 #define S3C_CLKCON_PCLK_UART0		(1<<1)
-#define S3C_CLKCON_PCLK_MFC		(1<<0)
-
-/* SCLK GATE Registers */
-#define S3C_CLKCON_SCLK_UHOST		(1<<30)
-#define S3C_CLKCON_SCLK_MMC2_48		(1<<29)
-#define S3C_CLKCON_SCLK_MMC1_48		(1<<28)
-#define S3C_CLKCON_SCLK_MMC0_48		(1<<27)
-#define S3C_CLKCON_SCLK_MMC2		(1<<26)
-#define S3C_CLKCON_SCLK_MMC1		(1<<25)
-#define S3C_CLKCON_SCLK_MMC0		(1<<24)
-#define S3C_CLKCON_SCLK_SPI1_48 	(1<<23)
-#define S3C_CLKCON_SCLK_SPI0_48 	(1<<22)
-#define S3C_CLKCON_SCLK_SPI1		(1<<21)
-#define S3C_CLKCON_SCLK_SPI0		(1<<20)
-#define S3C_CLKCON_SCLK_DAC27		(1<<19)
-#define S3C_CLKCON_SCLK_TV27		(1<<18)
-#define S3C_CLKCON_SCLK_SCALER27	(1<<17)
-#define S3C_CLKCON_SCLK_SCALER		(1<<16)
-#define S3C_CLKCON_SCLK_LCD27		(1<<15)
-#define S3C_CLKCON_SCLK_LCD		(1<<14)
-#define S3C6400_CLKCON_SCLK_POST1_27	(1<<13)
-#define S3C6410_CLKCON_FIMC		(1<<13)
-#define S3C_CLKCON_SCLK_POST0_27	(1<<12)
-#define S3C6400_CLKCON_SCLK_POST1	(1<<11)
-#define S3C6410_CLKCON_SCLK_AUDIO2	(1<<11)
-#define S3C_CLKCON_SCLK_POST0		(1<<10)
-#define S3C_CLKCON_SCLK_AUDIO1		(1<<9)
-#define S3C_CLKCON_SCLK_AUDIO0		(1<<8)
-#define S3C_CLKCON_SCLK_SECUR		(1<<7)
-#define S3C_CLKCON_SCLK_IRDA		(1<<6)
-#define S3C_CLKCON_SCLK_UART		(1<<5)
-#define S3C_CLKCON_SCLK_ONENAND 	(1<<4)
-#define S3C_CLKCON_SCLK_MFC		(1<<3)
-#define S3C_CLKCON_SCLK_CAM		(1<<2)
-#define S3C_CLKCON_SCLK_JPEG		(1<<1)
-
-/* CLKSRC */
-
-#define S3C6400_CLKSRC_APLL_MOUT	(1 << 0)
-#define S3C6400_CLKSRC_MPLL_MOUT	(1 << 1)
-#define S3C6400_CLKSRC_EPLL_MOUT	(1 << 2)
-#define S3C6400_CLKSRC_APLL_MOUT_SHIFT	(0)
-#define S3C6400_CLKSRC_MPLL_MOUT_SHIFT	(1)
-#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT	(2)
-#define S3C6400_CLKSRC_MFC		(1 << 4)
 
 /* MEM_SYS_CFG */
 #define MEM_SYS_CFG_INDEP_CF		0x4000
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
index 0c7e1d9..1649c0d 100644
--- a/arch/arm/mach-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -12,17 +12,21 @@
  * published by the Free Software Foundation.
  */
 
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
 #include <linux/kernel.h>
 #include <linux/syscore_ops.h>
 #include <linux/interrupt.h>
 #include <linux/serial_core.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/of.h>
 
 #include <mach/map.h>
 
 #include <plat/regs-serial.h>
-#include <plat/regs-timer.h>
 #include <mach/regs-gpio.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>
@@ -43,7 +47,6 @@ static struct sleep_save irq_save[] = {
 	SAVE_ITEM(S3C64XX_EINT0FLTCON2),
 	SAVE_ITEM(S3C64XX_EINT0FLTCON3),
 	SAVE_ITEM(S3C64XX_EINT0MASK),
-	SAVE_ITEM(S3C64XX_TINT_CSTAT),
 };
 
 static struct irq_grp_save {
@@ -103,6 +106,10 @@ static struct syscore_ops s3c64xx_irq_syscore_ops = {
 
 static __init int s3c64xx_syscore_init(void)
 {
+	/* Appropriate drivers (pinctrl, uart) handle this when using DT. */
+	if (of_have_populated_dt())
+		return 0;
+
 	register_syscore_ops(&s3c64xx_irq_syscore_ops);
 
 	return 0;
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 35e3f54..d266dd5 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -207,7 +207,7 @@ static struct platform_device *anw6410_devices[] __initdata = {
 static void __init anw6410_map_io(void)
 {
 	s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 8ad88ac..1a911df 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -30,7 +30,7 @@
 #include <linux/basic_mmio_gpio.h>
 #include <linux/spi/spi.h>
 
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/platform_data/s3c-hsotg.h>
 
 #include <video/platform_lcd.h>
@@ -120,7 +120,7 @@ static struct platform_device crag6410_backlight_device = {
 	.name		= "pwm-backlight",
 	.id		= -1,
 	.dev		= {
-		.parent	= &s3c_device_timer[0].dev,
+		.parent	= &samsung_device_pwm.dev,
 		.platform_data = &crag6410_backlight_data,
 	},
 };
@@ -375,7 +375,7 @@ static struct platform_device *crag6410_devices[] __initdata = {
 	&s3c_device_fb,
 	&s3c_device_ohci,
 	&s3c_device_usb_hsotg,
-	&s3c_device_timer[0],
+	&samsung_device_pwm,
 	&s3c64xx_device_iis0,
 	&s3c64xx_device_iis1,
 	&samsung_device_keypad,
@@ -743,7 +743,7 @@ static struct s3c2410_platform_i2c i2c1_pdata = {
 static void __init crag6410_map_io(void)
 {
 	s3c64xx_init_io(NULL, 0);
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 5b7f357..e806404 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -123,7 +123,7 @@ static struct platform_pwm_backlight_data hmt_backlight_data = {
 static struct platform_device hmt_backlight_device = {
 	.name		= "pwm-backlight",
 	.dev		= {
-		.parent	= &s3c_device_timer[1].dev,
+		.parent	= &samsung_device_pwm.dev,
 		.platform_data = &hmt_backlight_data,
 	},
 };
@@ -239,7 +239,7 @@ static struct platform_device *hmt_devices[] __initdata = {
 	&s3c_device_nand,
 	&s3c_device_fb,
 	&s3c_device_ohci,
-	&s3c_device_timer[1],
+	&samsung_device_pwm,
 	&hmt_backlight_device,
 	&hmt_leds_device,
 };
@@ -247,7 +247,7 @@ static struct platform_device *hmt_devices[] __initdata = {
 static void __init hmt_map_io(void)
 {
 	s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index fc043e3..58d46a3 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -231,7 +231,7 @@ static void __init mini6410_map_io(void)
 	u32 tmp;
 
 	s3c64xx_init_io(NULL, 0);
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 7e2c390..2067b0b 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -86,7 +86,7 @@ static struct map_desc ncp_iodesc[] __initdata = {};
 static void __init ncp_map_io(void)
 {
 	s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
diff --git a/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c
new file mode 100644
index 0000000..7eb9a10
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c
@@ -0,0 +1,85 @@
+/*
+ * Samsung's S3C64XX flattened device tree enabled machine
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/clk-provider.h>
+#include <linux/irqchip.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/system_misc.h>
+
+#include <plat/cpu.h>
+#include <plat/watchdog-reset.h>
+
+#include <mach/map.h>
+
+#include "common.h"
+
+/*
+ * IO mapping for shared system controller IP.
+ *
+ * FIXME: Make remaining drivers use dynamic mapping.
+ */
+static struct map_desc s3c64xx_dt_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S3C_VA_SYS,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_SYSCON),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void __init s3c64xx_dt_map_io(void)
+{
+	debug_ll_io_init();
+	iotable_init(s3c64xx_dt_iodesc, ARRAY_SIZE(s3c64xx_dt_iodesc));
+
+	s3c64xx_init_cpu();
+
+	if (!soc_is_s3c64xx())
+		panic("SoC is not S3C64xx!");
+}
+
+static void __init s3c64xx_dt_init_irq(void)
+{
+	of_clk_init(NULL);
+	samsung_wdt_reset_of_init();
+	irqchip_init();
+};
+
+static void __init s3c64xx_dt_init_machine(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static void s3c64xx_dt_restart(enum reboot_mode mode, const char *cmd)
+{
+	if (mode != REBOOT_SOFT)
+		samsung_wdt_reset();
+
+	/* if all else fails, or mode was for soft, jump to 0 */
+	soft_restart(0);
+}
+
+static char const *s3c64xx_dt_compat[] __initdata = {
+	"samsung,s3c6400",
+	"samsung,s3c6410",
+	NULL
+};
+
+DT_MACHINE_START(S3C6400_DT, "Samsung S3C64xx (Flattened Device Tree)")
+	/* Maintainer: Tomasz Figa <tomasz.figa@gmail.com> */
+	.dt_compat	= s3c64xx_dt_compat,
+	.map_io		= s3c64xx_dt_map_io,
+	.init_irq	= s3c64xx_dt_init_irq,
+	.init_machine	= s3c64xx_dt_init_machine,
+	.restart        = s3c64xx_dt_restart,
+MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index 58ac990..0f47237 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -157,7 +157,7 @@ static struct platform_pwm_backlight_data smartq_backlight_data = {
 static struct platform_device smartq_backlight_device = {
 	.name		= "pwm-backlight",
 	.dev		= {
-		.parent	= &s3c_device_timer[1].dev,
+		.parent	= &samsung_device_pwm.dev,
 		.platform_data = &smartq_backlight_data,
 	},
 };
@@ -246,7 +246,7 @@ static struct platform_device *smartq_devices[] __initdata = {
 	&s3c_device_i2c0,
 	&s3c_device_ohci,
 	&s3c_device_rtc,
-	&s3c_device_timer[1],
+	&samsung_device_pwm,
 	&s3c_device_ts,
 	&s3c_device_usb_hsotg,
 	&s3c64xx_device_iis0,
@@ -337,13 +337,6 @@ err:
 	return ret;
 }
 
-static int __init smartq_usb_otg_init(void)
-{
-	clk_xusbxti.rate = 12000000;
-
-	return 0;
-}
-
 static int __init smartq_wifi_init(void)
 {
 	int ret;
@@ -377,7 +370,8 @@ static struct map_desc smartq_iodesc[] __initdata = {};
 void __init smartq_map_io(void)
 {
 	s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc));
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
+	s3c64xx_set_xusbxti_freq(12000000);
 	s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
@@ -399,7 +393,6 @@ void __init smartq_machine_init(void)
 	WARN_ON(smartq_lcd_setup_gpio());
 	WARN_ON(smartq_power_off_init());
 	WARN_ON(smartq_usb_host_init());
-	WARN_ON(smartq_usb_otg_init());
 	WARN_ON(smartq_wifi_init());
 
 	platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index d70c084..27381cf 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -65,7 +65,7 @@ static struct map_desc smdk6400_iodesc[] = {};
 static void __init smdk6400_map_io(void)
 {
 	s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index bd3295a..2a7b32c 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -274,6 +274,7 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 	&s3c_device_i2c1,
 	&s3c_device_fb,
 	&s3c_device_ohci,
+	&samsung_device_pwm,
 	&s3c_device_usb_hsotg,
 	&s3c64xx_device_iisv4,
 	&samsung_device_keypad,
@@ -633,7 +634,7 @@ static void __init smdk6410_map_io(void)
 	u32 tmp;
 
 	s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
-	s3c24xx_init_clocks(12000000);
+	s3c64xx_set_xtal_freq(12000000);
 	s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
@@ -691,9 +692,9 @@ static void __init smdk6410_machine_init(void)
 
 	s3c_ide_set_platdata(&smdk6410_ide_pdata);
 
-	samsung_bl_set(&smdk6410_bl_gpio_info, &smdk6410_bl_data);
-
 	platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
+
+	samsung_bl_set(&smdk6410_bl_gpio_info, &smdk6410_bl_data);
 }
 
 MACHINE_START(SMDK6410, "SMDK6410")
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 6a1f91f..8cdb824 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -194,29 +194,8 @@ void s3c_pm_debug_smdkled(u32 set, u32 clear)
 #endif
 
 static struct sleep_save core_save[] = {
-	SAVE_ITEM(S3C_APLL_LOCK),
-	SAVE_ITEM(S3C_MPLL_LOCK),
-	SAVE_ITEM(S3C_EPLL_LOCK),
-	SAVE_ITEM(S3C_CLK_SRC),
-	SAVE_ITEM(S3C_CLK_DIV0),
-	SAVE_ITEM(S3C_CLK_DIV1),
-	SAVE_ITEM(S3C_CLK_DIV2),
-	SAVE_ITEM(S3C_CLK_OUT),
-	SAVE_ITEM(S3C_HCLK_GATE),
-	SAVE_ITEM(S3C_PCLK_GATE),
-	SAVE_ITEM(S3C_SCLK_GATE),
-	SAVE_ITEM(S3C_MEM0_GATE),
-
-	SAVE_ITEM(S3C_EPLL_CON1),
-	SAVE_ITEM(S3C_EPLL_CON0),
-
 	SAVE_ITEM(S3C64XX_MEM0DRVCON),
 	SAVE_ITEM(S3C64XX_MEM1DRVCON),
-
-#ifndef CONFIG_CPU_FREQ
-	SAVE_ITEM(S3C_APLL_CON),
-	SAVE_ITEM(S3C_MPLL_CON),
-#endif
 };
 
 static struct sleep_save misc_save[] = {
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index 4869714..3db0c98 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -9,6 +9,10 @@
  * published by the Free Software Foundation.
 */
 
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/interrupt.h>
@@ -20,6 +24,7 @@
 #include <linux/device.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -58,12 +63,6 @@ void __init s3c6400_map_io(void)
 	s3c64xx_onenand1_setname("s3c6400-onenand");
 }
 
-void __init s3c6400_init_clocks(int xtal)
-{
-	s3c64xx_register_clocks(xtal, S3C6400_CLKDIV0_ARM_MASK);
-	s3c64xx_setup_clocks();
-}
-
 void __init s3c6400_init_irq(void)
 {
 	/* VIC0 does not have IRQS 5..7,
@@ -82,6 +81,10 @@ static struct device s3c6400_dev = {
 
 static int __init s3c6400_core_init(void)
 {
+	/* Not applicable when using DT. */
+	if (of_have_populated_dt())
+		return 0;
+
 	return subsys_system_register(&s3c6400_subsys, NULL);
 }
 
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index 31c29fd..72b2278 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -10,6 +10,10 @@
  * published by the Free Software Foundation.
 */
 
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/interrupt.h>
@@ -21,6 +25,7 @@
 #include <linux/device.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -62,13 +67,6 @@ void __init s3c6410_map_io(void)
 	s3c_cfcon_setname("s3c64xx-pata");
 }
 
-void __init s3c6410_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
-	s3c64xx_register_clocks(xtal, S3C6410_CLKDIV0_ARM_MASK);
-	s3c64xx_setup_clocks();
-}
-
 void __init s3c6410_init_irq(void)
 {
 	/* VIC0 is missing IRQ7, VIC1 is fully populated. */
@@ -86,6 +84,10 @@ static struct device s3c6410_dev = {
 
 static int __init s3c6410_core_init(void)
 {
+	/* Not applicable when using DT. */
+	if (of_have_populated_dt())
+		return 0;
+
 	return subsys_system_register(&s3c6410_subsys, NULL);
 }
 
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index 5a707bd..bb2111b 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -11,14 +11,12 @@ config CPU_S5P6440
 	bool
 	select S5P_SLEEP if PM
 	select SAMSUNG_DMADEV
-	select SAMSUNG_HRT
 	select SAMSUNG_WAKEMASK if PM
 	help
 	  Enable S5P6440 CPU support
 
 config CPU_S5P6450
 	bool
-	select SAMSUNG_HRT
 	select S5P_SLEEP if PM
 	select SAMSUNG_DMADEV
 	select SAMSUNG_WAKEMASK if PM
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c
index 35378152..ae34a1d 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6440.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c
@@ -629,6 +629,4 @@ void __init s5p6440_register_clocks(void)
 	clkdev_add_table(s5p6440_clk_lookup, ARRAY_SIZE(s5p6440_clk_lookup));
 
 	s3c24xx_register_clock(&dummy_apb_pclk);
-
-	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c
index af384dd..0b3ca2e 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6450.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c
@@ -698,6 +698,4 @@ void __init s5p6450_register_clocks(void)
 	clkdev_add_table(s5p6450_clk_lookup, ARRAY_SIZE(s5p6450_clk_lookup));
 
 	s3c24xx_register_clock(&dummy_apb_pclk);
-
-	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
index dfdfdc3..42e14f2 100644
--- a/arch/arm/mach-s5p64x0/common.c
+++ b/arch/arm/mach-s5p64x0/common.c
@@ -19,6 +19,7 @@
 #include <linux/io.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <clocksource/samsung_pwm.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
 #include <linux/dma-mapping.h>
@@ -47,6 +48,7 @@
 #include <plat/fb-core.h>
 #include <plat/spi-core.h>
 #include <plat/gpio-cfg.h>
+#include <plat/pwm-core.h>
 #include <plat/regs-irqtype.h>
 #include <plat/regs-serial.h>
 #include <plat/watchdog-reset.h>
@@ -157,6 +159,30 @@ static void s5p64x0_idle(void)
 	cpu_do_idle();
 }
 
+static struct samsung_pwm_variant s5p64x0_pwm_variant = {
+	.bits		= 32,
+	.div_base	= 0,
+	.has_tint_cstat	= true,
+	.tclk_mask	= 0,
+};
+
+void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+{
+	s5p64x0_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+	s5p64x0_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init samsung_timer_init(void)
+{
+	unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+		IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
+		IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
+	};
+
+	samsung_pwm_clocksource_init(S3C_VA_TIMER,
+					timer_irqs, &s5p64x0_pwm_variant);
+}
+
 /*
  * s5p64x0_map_io
  *
@@ -176,6 +202,7 @@ void __init s5p64x0_init_io(struct map_desc *mach_desc, int size)
 	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
 	samsung_wdt_reset_init(S3C_VA_WATCHDOG);
 
+	samsung_pwm_set_platdata(&s5p64x0_pwm_variant);
 }
 
 void __init s5p6440_map_io(void)
diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h
index 5b845e8..53982db 100644
--- a/arch/arm/mach-s5p64x0/include/mach/irqs.h
+++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h
@@ -141,8 +141,6 @@
 
 #define IRQ_EINT_GROUP(grp, x)	(IRQ_EINT_GROUP##grp##_BASE + (x))
 
-#define IRQ_TIMER_BASE		(11)
-
 /* Set the default NR_IRQS */
 
 #define NR_IRQS			(IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1)
diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h
index 0c0175d..50a6e96 100644
--- a/arch/arm/mach-s5p64x0/include/mach/map.h
+++ b/arch/arm/mach-s5p64x0/include/mach/map.h
@@ -76,6 +76,7 @@
 #define S5P_PA_TIMER		S5P64X0_PA_TIMER
 
 #define SAMSUNG_PA_ADC		S5P64X0_PA_ADC
+#define SAMSUNG_PA_TIMER	S5P64X0_PA_TIMER
 
 /* UART */
 
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 73f71a6..0b00304 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -162,6 +162,7 @@ static struct platform_device *smdk6440_devices[] __initdata = {
 	&s3c_device_rtc,
 	&s3c_device_i2c0,
 	&s3c_device_i2c1,
+	&samsung_device_pwm,
 	&s3c_device_ts,
 	&s3c_device_wdt,
 	&s5p6440_device_iis,
@@ -254,8 +255,6 @@ static void __init smdk6440_machine_init(void)
 	i2c_register_board_info(1, smdk6440_i2c_devs1,
 			ARRAY_SIZE(smdk6440_i2c_devs1));
 
-	samsung_bl_set(&smdk6440_bl_gpio_info, &smdk6440_bl_data);
-
 	s5p6440_set_lcd_interface();
 	s3c_fb_set_platdata(&smdk6440_lcd_pdata);
 
@@ -264,6 +263,8 @@ static void __init smdk6440_machine_init(void)
 	s3c_sdhci2_set_platdata(&smdk6440_hsmmc2_pdata);
 
 	platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
+
+	samsung_bl_set(&smdk6440_bl_gpio_info, &smdk6440_bl_data);
 }
 
 MACHINE_START(SMDK6440, "SMDK6440")
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index 18303e1..5949296 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -180,6 +180,7 @@ static struct platform_device *smdk6450_devices[] __initdata = {
 	&s3c_device_rtc,
 	&s3c_device_i2c0,
 	&s3c_device_i2c1,
+	&samsung_device_pwm,
 	&s3c_device_ts,
 	&s3c_device_wdt,
 	&s5p6450_device_iis0,
@@ -273,8 +274,6 @@ static void __init smdk6450_machine_init(void)
 	i2c_register_board_info(1, smdk6450_i2c_devs1,
 			ARRAY_SIZE(smdk6450_i2c_devs1));
 
-	samsung_bl_set(&smdk6450_bl_gpio_info, &smdk6450_bl_data);
-
 	s5p6450_set_lcd_interface();
 	s3c_fb_set_platdata(&smdk6450_lcd_pdata);
 
@@ -283,6 +282,8 @@ static void __init smdk6450_machine_init(void)
 	s3c_sdhci2_set_platdata(&smdk6450_hsmmc2_pdata);
 
 	platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices));
+
+	samsung_bl_set(&smdk6450_bl_gpio_info, &smdk6450_bl_data);
 }
 
 MACHINE_START(SMDK6450, "SMDK6450")
diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c
index 97c2a08a..861e15c 100644
--- a/arch/arm/mach-s5p64x0/pm.c
+++ b/arch/arm/mach-s5p64x0/pm.c
@@ -18,7 +18,6 @@
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
-#include <plat/regs-timer.h>
 #include <plat/wakeup-mask.h>
 
 #include <mach/regs-clock.h>
@@ -48,8 +47,6 @@ static struct sleep_save s5p64x0_misc_save[] = {
 	SAVE_ITEM(S5P64X0_MEM0CONSLP1),
 	SAVE_ITEM(S5P64X0_MEM0DRVCON),
 	SAVE_ITEM(S5P64X0_MEM1DRVCON),
-
-	SAVE_ITEM(S3C64XX_TINT_CSTAT),
 };
 
 /* DPLL is present only in S5P6450 */
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index 2f456a4..15170be 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -11,7 +11,6 @@ config CPU_S5PC100
 	bool
 	select S5P_EXT_INT
 	select SAMSUNG_DMADEV
-	select SAMSUNG_HRT
 	help
 	  Enable S5PC100 CPU support
 
diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
index a206dc3..d0dc10e 100644
--- a/arch/arm/mach-s5pc100/clock.c
+++ b/arch/arm/mach-s5pc100/clock.c
@@ -1358,6 +1358,4 @@ void __init s5pc100_register_clocks(void)
 		s3c_disable_clocks(clk_cdev[ptr], 1);
 
 	s3c24xx_register_clock(&dummy_apb_pclk);
-
-	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c
index 4bdfecf..c5a8eea 100644
--- a/arch/arm/mach-s5pc100/common.c
+++ b/arch/arm/mach-s5pc100/common.c
@@ -22,6 +22,7 @@
 #include <linux/io.h>
 #include <linux/device.h>
 #include <linux/serial_core.h>
+#include <clocksource/samsung_pwm.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
 #include <linux/reboot.h>
@@ -46,6 +47,7 @@
 #include <plat/fb-core.h>
 #include <plat/iic-core.h>
 #include <plat/onenand-core.h>
+#include <plat/pwm-core.h>
 #include <plat/spi-core.h>
 #include <plat/regs-serial.h>
 #include <plat/watchdog-reset.h>
@@ -132,6 +134,30 @@ static struct map_desc s5pc100_iodesc[] __initdata = {
 	}
 };
 
+static struct samsung_pwm_variant s5pc100_pwm_variant = {
+	.bits		= 32,
+	.div_base	= 0,
+	.has_tint_cstat	= true,
+	.tclk_mask	= (1 << 5),
+};
+
+void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+{
+	s5pc100_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+	s5pc100_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init samsung_timer_init(void)
+{
+	unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+		IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
+		IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
+	};
+
+	samsung_pwm_clocksource_init(S3C_VA_TIMER,
+					timer_irqs, &s5pc100_pwm_variant);
+}
+
 /*
  * s5pc100_map_io
  *
@@ -149,6 +175,8 @@ void __init s5pc100_init_io(struct map_desc *mach_desc, int size)
 	s5p_init_cpu(S5P_VA_CHIPID);
 
 	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+
+	samsung_pwm_set_platdata(&s5pc100_pwm_variant);
 }
 
 void __init s5pc100_map_io(void)
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
index 2870f12..d2eb475 100644
--- a/arch/arm/mach-s5pc100/include/mach/irqs.h
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -97,8 +97,6 @@
 #define IRQ_SDMFIQ		S5P_IRQ_VIC2(31)
 #define IRQ_VIC_END		S5P_IRQ_VIC2(31)
 
-#define IRQ_TIMER_BASE		(11)
-
 #define S5P_EINT_BASE1		(S5P_IRQ_VIC0(0))
 #define S5P_EINT_BASE2		(IRQ_VIC_END + 1)
 
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
index 54bc4f8..2550b61 100644
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -116,6 +116,7 @@
 #define SAMSUNG_PA_ADC			S5PC100_PA_TSADC
 #define SAMSUNG_PA_CFCON		S5PC100_PA_CFCON
 #define SAMSUNG_PA_KEYPAD		S5PC100_PA_KEYPAD
+#define SAMSUNG_PA_TIMER		S5PC100_PA_TIMER
 
 #define S5PC100_VA_OTHERS		(S3C_VA_SYS + 0x10000)
 
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 8c880f7..7c57a22 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -194,6 +194,7 @@ static struct platform_device *smdkc100_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
 	&s3c_device_hsmmc2,
+	&samsung_device_pwm,
 	&s3c_device_ts,
 	&s3c_device_wdt,
 	&smdkc100_lcd_powerdev,
@@ -246,9 +247,9 @@ static void __init smdkc100_machine_init(void)
 	gpio_request(S5PC100_GPH0(6), "GPH0");
 	smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0);
 
-	samsung_bl_set(&smdkc100_bl_gpio_info, &smdkc100_bl_data);
-
 	platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
+
+	samsung_bl_set(&smdkc100_bl_gpio_info, &smdkc100_bl_data);
 }
 
 MACHINE_START(SMDKC100, "SMDKC100")
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 0963283..caaedaf 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -15,7 +15,6 @@ config CPU_S5PV210
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
 	select SAMSUNG_DMADEV
-	select SAMSUNG_HRT
 	help
 	  Enable S5PV210 CPU support
 
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index f051f53..ca46372 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -1362,5 +1362,4 @@ void __init s5pv210_register_clocks(void)
 	for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
 		s3c_disable_clocks(clk_cdev[ptr], 1);
 
-	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c
index 023f1a7..26027a2 100644
--- a/arch/arm/mach-s5pv210/common.c
+++ b/arch/arm/mach-s5pv210/common.c
@@ -19,6 +19,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/device.h>
+#include <clocksource/samsung_pwm.h>
 #include <linux/platform_device.h>
 #include <linux/sched.h>
 #include <linux/dma-mapping.h>
@@ -42,6 +43,7 @@
 #include <plat/fimc-core.h>
 #include <plat/iic-core.h>
 #include <plat/keypad-core.h>
+#include <plat/pwm-core.h>
 #include <plat/tv-core.h>
 #include <plat/spi-core.h>
 #include <plat/regs-serial.h>
@@ -148,6 +150,30 @@ void s5pv210_restart(enum reboot_mode mode, const char *cmd)
 	__raw_writel(0x1, S5P_SWRESET);
 }
 
+static struct samsung_pwm_variant s5pv210_pwm_variant = {
+	.bits		= 32,
+	.div_base	= 0,
+	.has_tint_cstat	= true,
+	.tclk_mask	= (1 << 5),
+};
+
+void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+{
+	s5pv210_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+	s5pv210_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init samsung_timer_init(void)
+{
+	unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+		IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
+		IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
+	};
+
+	samsung_pwm_clocksource_init(S3C_VA_TIMER,
+					timer_irqs, &s5pv210_pwm_variant);
+}
+
 /*
  * s5pv210_map_io
  *
@@ -165,6 +191,8 @@ void __init s5pv210_init_io(struct map_desc *mach_desc, int size)
 	s5p_init_cpu(S5P_VA_CHIPID);
 
 	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+
+	samsung_pwm_set_platdata(&s5pv210_pwm_variant);
 }
 
 void __init s5pv210_map_io(void)
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
index e777e01..5e0de3a 100644
--- a/arch/arm/mach-s5pv210/include/mach/irqs.h
+++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
@@ -118,8 +118,6 @@
 #define IRQ_MDNIE3		S5P_IRQ_VIC3(8)
 #define IRQ_VIC_END		S5P_IRQ_VIC3(31)
 
-#define IRQ_TIMER_BASE		(11)
-
 #define S5P_EINT_BASE1		(S5P_IRQ_VIC0(0))
 #define S5P_EINT_BASE2		(IRQ_VIC_END + 1)
 
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index b7c8a19..763929a 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -139,6 +139,7 @@
 #define SAMSUNG_PA_ADC			S5PV210_PA_ADC
 #define SAMSUNG_PA_CFCON		S5PV210_PA_CFCON
 #define SAMSUNG_PA_KEYPAD		S5PV210_PA_KEYPAD
+#define SAMSUNG_PA_TIMER		S5PV210_PA_TIMER
 
 /* UART */
 
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
index 032de66..e345584 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
@@ -147,10 +147,6 @@
 #define S5P_HDMI_PHY_CONTROL	S5P_CLKREG(0xE804)
 #define S5P_USB_PHY_CONTROL	S5P_CLKREG(0xE80C)
 #define S5P_DAC_PHY_CONTROL	S5P_CLKREG(0xE810)
-#define S5P_MIPI_DPHY_CONTROL(x) S5P_CLKREG(0xE814)
-#define S5P_MIPI_DPHY_ENABLE	(1 << 0)
-#define S5P_MIPI_DPHY_SRESETN	(1 << 1)
-#define S5P_MIPI_DPHY_MRESETN	(1 << 2)
 
 #define S5P_INFORM0		S5P_CLKREG(0xF000)
 #define S5P_INFORM1		S5P_CLKREG(0xF004)
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index d50b6f1..6d72bb99 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -218,6 +218,7 @@ static struct platform_device *smdkv210_devices[] __initdata = {
 	&s3c_device_i2c0,
 	&s3c_device_i2c1,
 	&s3c_device_i2c2,
+	&samsung_device_pwm,
 	&s3c_device_rtc,
 	&s3c_device_ts,
 	&s3c_device_usb_hsotg,
@@ -316,11 +317,11 @@ static void __init smdkv210_machine_init(void)
 
 	s3c_fb_set_platdata(&smdkv210_lcd0_pdata);
 
-	samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data);
-
 	s3c_hsotg_set_platdata(&smdkv210_hsotg_pdata);
 
 	platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
+
+	samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data);
 }
 
 MACHINE_START(SMDKV210, "SMDKV210")
diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c
index 2b68a67..3cf3f9c 100644
--- a/arch/arm/mach-s5pv210/pm.c
+++ b/arch/arm/mach-s5pv210/pm.c
@@ -21,7 +21,6 @@
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
-#include <plat/regs-timer.h>
 
 #include <mach/regs-irq.h>
 #include <mach/regs-clock.h>
@@ -77,15 +76,6 @@ static struct sleep_save s5pv210_core_save[] = {
 	/* Clock ETC */
 	SAVE_ITEM(S5P_CLK_OUT),
 	SAVE_ITEM(S5P_MDNIE_SEL),
-
-	/* PWM Register */
-	SAVE_ITEM(S3C2410_TCFG0),
-	SAVE_ITEM(S3C2410_TCFG1),
-	SAVE_ITEM(S3C64XX_TINT_CSTAT),
-	SAVE_ITEM(S3C2410_TCON),
-	SAVE_ITEM(S3C2410_TCNTB(0)),
-	SAVE_ITEM(S3C2410_TCMPB(0)),
-	SAVE_ITEM(S3C2410_TCNTO(0)),
 };
 
 static int s5pv210_cpu_suspend(unsigned long arg)
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 612a456..7fb96eb 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -289,7 +289,7 @@ static void collie_flash_exit(void)
 }
 
 static struct flash_platform_data collie_flash_data = {
-	.map_name	= "cfi_probe",
+	.map_name	= "jedec_probe",
 	.init		= collie_flash_init,
 	.set_vpp	= collie_set_vpp,
 	.exit		= collie_flash_exit,
diff --git a/arch/arm/mach-shark/Makefile b/arch/arm/mach-shark/Makefile
deleted file mode 100644
index 2965718..0000000
--- a/arch/arm/mach-shark/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y			:= core.o dma.o irq.o pci.o leds.o
-obj-m			:=
-obj-n			:=
-obj-			:=
diff --git a/arch/arm/mach-shark/Makefile.boot b/arch/arm/mach-shark/Makefile.boot
deleted file mode 100644
index e40e24e..0000000
--- a/arch/arm/mach-shark/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-   zreladdr-y	+= 0x08008000
-
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
deleted file mode 100644
index 1d32c5e..0000000
--- a/arch/arm/mach-shark/core.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- *  linux/arch/arm/mach-shark/arch.c
- *
- *  Architecture specific stuff.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/sched.h>
-#include <linux/serial_8250.h>
-#include <linux/io.h>
-#include <linux/cpu.h>
-#include <linux/reboot.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/param.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#define ROMCARD_SIZE            0x08000000
-#define ROMCARD_START           0x10000000
-
-static void shark_restart(enum reboot_mode mode, const char *cmd)
-{
-        short temp;
-        /* Reset the Machine via pc[3] of the sequoia chipset */
-        outw(0x09,0x24);
-        temp=inw(0x26);
-        temp = temp | (1<<3) | (1<<10);
-        outw(0x09,0x24);
-        outw(temp,0x26);
-}
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.iobase		= 0x3f8,
-		.irq		= 4,
-		.uartclk	= 1843200,
-		.regshift	= 0,
-		.iotype		= UPIO_PORT,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{
-		.iobase		= 0x2f8,
-		.irq		= 3,
-		.uartclk	= 1843200,
-		.regshift	= 0,
-		.iotype		= UPIO_PORT,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
-static struct resource rtc_resources[] = {
-	[0] = {
-		.start	= 0x70,
-		.end	= 0x73,
-		.flags	= IORESOURCE_IO,
-	},
-	[1] = {
-		.start	= IRQ_ISA_RTC_ALARM,
-		.end	= IRQ_ISA_RTC_ALARM,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device rtc_device = {
-	.name		= "rtc_cmos",
-	.id		= -1,
-	.resource	= rtc_resources,
-	.num_resources	= ARRAY_SIZE(rtc_resources),
-};
-
-static int __init shark_init(void)
-{
-	int ret;
-
-	if (machine_is_shark())
-	{
-	        ret = platform_device_register(&rtc_device);
-		if (ret) printk(KERN_ERR "Unable to register RTC device: %d\n", ret);
-		ret = platform_device_register(&serial_device);
-		if (ret) printk(KERN_ERR "Unable to register Serial device: %d\n", ret);
-	}
-	return 0;
-}
-
-arch_initcall(shark_init);
-
-extern void shark_init_irq(void);
-
-#define IRQ_TIMER 0
-#define HZ_TIME ((1193180 + HZ/2) / HZ)
-
-static irqreturn_t
-shark_timer_interrupt(int irq, void *dev_id)
-{
-	timer_tick();
-	return IRQ_HANDLED;
-}
-
-static struct irqaction shark_timer_irq = {
-	.name		= "Shark Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= shark_timer_interrupt,
-};
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-static void __init shark_timer_init(void)
-{
-	outb(0x34, 0x43);               /* binary, mode 0, LSB/MSB, Ch 0 */
-	outb(HZ_TIME & 0xff, 0x40);     /* LSB of count */
-	outb(HZ_TIME >> 8, 0x40);
-
-	setup_irq(IRQ_TIMER, &shark_timer_irq);
-}
-
-static void shark_init_early(void)
-{
-	cpu_idle_poll_ctrl(true);
-}
-
-MACHINE_START(SHARK, "Shark")
-	/* Maintainer: Alexander Schulz */
-	.atag_offset	= 0x3000,
-	.init_early	= shark_init_early,
-	.init_irq	= shark_init_irq,
-	.init_time	= shark_timer_init,
-	.dma_zone_size	= SZ_4M,
-	.restart	= shark_restart,
-MACHINE_END
diff --git a/arch/arm/mach-shark/dma.c b/arch/arm/mach-shark/dma.c
deleted file mode 100644
index 10b5b8b..0000000
--- a/arch/arm/mach-shark/dma.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  linux/arch/arm/mach-shark/dma.c
- *
- *  by Alexander Schulz
- *
- *  derived from:
- *  arch/arm/kernel/dma-ebsa285.c
- *  Copyright (C) 1998 Phil Blundell
- */
-
-#include <linux/init.h>
-
-#include <asm/dma.h>
-#include <asm/mach/dma.h>
-
-static int __init shark_dma_init(void)
-{
-#ifdef CONFIG_ISA_DMA
-	isa_init_dma();
-#endif
-	return 0;
-}
-core_initcall(shark_dma_init);
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
deleted file mode 100644
index d129119..0000000
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ /dev/null
@@ -1,34 +0,0 @@
-/* arch/arm/mach-shark/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0x3f8
-		orr	\rv, \rp, #0xfe000000
-		orr	\rv, \rv, #0x00e00000
-		orr	\rp, \rp, #0x40000000
-		.endm
-
-		.macro	senduart,rd,rx
-		strb	\rd, [\rx]
-		.endm
-
-		.macro waituart,rd,rx
-		.endm
-
-		.macro	busyuart,rd,rx
-		mov	\rd, #0
-1001:		add	\rd, \rd, #1
-		teq	\rd, #0x10000
-		bne	1001b
-		.endm
-
diff --git a/arch/arm/mach-shark/include/mach/entry-macro.S b/arch/arm/mach-shark/include/mach/entry-macro.S
deleted file mode 100644
index c9e49f0..0000000
--- a/arch/arm/mach-shark/include/mach/entry-macro.S
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Shark platform
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-		.macro  get_irqnr_preamble, base, tmp
-		mov	\base, #0xfe000000
-		orr	\base, \base, #0x00e00000
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		mov	\irqstat, #0x0C
-		strb	\irqstat, [\base, #0x20]	@outb(0x0C, 0x20) /* Poll command */
-		ldrb	\irqnr, [\base, #0x20]		@irq = inb(0x20) & 7
-		and	\irqstat, \irqnr, #0x80
-		teq	\irqstat, #0
-		beq	43f
-		and	\irqnr, \irqnr, #7
-		teq	\irqnr, #2
-		bne	44f
-43:		mov	\irqstat, #0x0C
-		strb	\irqstat, [\base, #0xa0]	@outb(0x0C, 0xA0) /* Poll command */
-		ldrb	\irqnr, [\base, #0xa0]		@irq = (inb(0xA0) & 7) + 8
-		and	\irqstat, \irqnr, #0x80
-		teq	\irqstat, #0
-		beq	44f
-		and	\irqnr, \irqnr, #7
-		add	\irqnr, \irqnr, #8
-44:		teq	\irqstat, #0
-		.endm
-
diff --git a/arch/arm/mach-shark/include/mach/framebuffer.h b/arch/arm/mach-shark/include/mach/framebuffer.h
deleted file mode 100644
index 84a5bf6..0000000
--- a/arch/arm/mach-shark/include/mach/framebuffer.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/framebuffer.h
- *
- * by Alexander Schulz
- *
- */
-
-#ifndef __ASM_ARCH_FRAMEBUFFER_H
-#define __ASM_ARCH_FRAMEBUFFER_H
-
-/* defines for the Framebuffer */
-#define FB_START		0x06000000
-#define FB_SIZE			0x01000000
-
-#endif
-
diff --git a/arch/arm/mach-shark/include/mach/hardware.h b/arch/arm/mach-shark/include/mach/hardware.h
deleted file mode 100644
index 663f952..0000000
--- a/arch/arm/mach-shark/include/mach/hardware.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/hardware.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/mach-ebsa110/include/mach/hardware.h
- * Copyright (C) 1996-1999 Russell King.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define UNCACHEABLE_ADDR        0xdf010000
-
-#endif
-
diff --git a/arch/arm/mach-shark/include/mach/irqs.h b/arch/arm/mach-shark/include/mach/irqs.h
deleted file mode 100644
index c8e8a4e..0000000
--- a/arch/arm/mach-shark/include/mach/irqs.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/irqs.h
- *
- * by Alexander Schulz
- */
-
-#define NR_IRQS			16
-
-#define IRQ_ISA_KEYBOARD	 1
-#define IRQ_ISA_RTC_ALARM	 8
-#define I8042_KBD_IRQ		 1
-#define I8042_AUX_IRQ		12
-#define IRQ_HARDDISK            14
diff --git a/arch/arm/mach-shark/include/mach/isa-dma.h b/arch/arm/mach-shark/include/mach/isa-dma.h
deleted file mode 100644
index 96c43b8..0000000
--- a/arch/arm/mach-shark/include/mach/isa-dma.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/isa-dma.h
- *
- * by Alexander Schulz
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#define MAX_DMA_CHANNELS	8
-#define DMA_ISA_CASCADE         4
-
-#endif /* _ASM_ARCH_DMA_H */
-
diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h
deleted file mode 100644
index 1cf8d69..0000000
--- a/arch/arm/mach-shark/include/mach/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/memory.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/mach-ebsa110/include/mach/memory.h
- * Copyright (c) 1996-1999 Russell King.
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET     UL(0x08000000)
-
-/*
- * Cache flushing area
- */
-#define FLUSH_BASE_PHYS		0x80000000
-#define FLUSH_BASE		0xdf000000
-
-#endif
diff --git a/arch/arm/mach-shark/include/mach/timex.h b/arch/arm/mach-shark/include/mach/timex.h
deleted file mode 100644
index bb6eeae..0000000
--- a/arch/arm/mach-shark/include/mach/timex.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/timex.h
- *
- * by Alexander Schulz
- */
-
-#define CLOCK_TICK_RATE 1193180
diff --git a/arch/arm/mach-shark/include/mach/uncompress.h b/arch/arm/mach-shark/include/mach/uncompress.h
deleted file mode 100644
index a168435..0000000
--- a/arch/arm/mach-shark/include/mach/uncompress.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/uncompress.h
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/mach-footbridge/include/mach/uncompress.h
- * Copyright (C) 1996,1997,1998 Russell King
- */
-
-#define SERIAL_BASE ((volatile unsigned char *)0x400003f8)
-
-static inline void putc(int c)
-{
-	volatile int t;
-
-	SERIAL_BASE[0] = c;
-	t=0x10000;
-	while (t--);
-}
-
-static inline void flush(void)
-{
-}
-
-#ifdef DEBUG
-static void putn(unsigned long z)
-{
-	int i;
-	char x;
-
-	putc('0');
-	putc('x');
-	for (i=0;i<8;i++) {
-		x='0'+((z>>((7-i)*4))&0xf);
-		if (x>'9') x=x-'0'+'A'-10;
-		putc(x);
-	}
-}
-
-static void putr()
-{
-	putc('\n');
-	putc('\r');
-}
-#endif
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-shark/irq.c b/arch/arm/mach-shark/irq.c
deleted file mode 100644
index 5dce13e..0000000
--- a/arch/arm/mach-shark/irq.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- *  linux/arch/arm/mach-shark/irq.c
- *
- * by Alexander Schulz
- *
- * derived from linux/arch/ppc/kernel/i8259.c and:
- * arch/arm/mach-ebsa110/include/mach/irq.h
- * Copyright (C) 1996-1998 Russell King
- */
-
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-/*
- * 8259A PIC functions to handle ISA devices:
- */
-
-/*
- * This contains the irq mask for both 8259A irq controllers,
- * Let through the cascade-interrupt no. 2 (ff-(1<<2)==fb)
- */
-static unsigned char cached_irq_mask[2] = { 0xfb, 0xff };
-
-/*
- * These have to be protected by the irq controller spinlock
- * before being called.
- */
-static void shark_disable_8259A_irq(struct irq_data *d)
-{
-	unsigned int mask;
-	if (d->irq<8) {
-	  mask = 1 << d->irq;
-	  cached_irq_mask[0] |= mask;
-	  outb(cached_irq_mask[1],0xA1);
-	} else {
-	  mask = 1 << (d->irq-8);
-	  cached_irq_mask[1] |= mask;
-	  outb(cached_irq_mask[0],0x21);
-	}
-}
-
-static void shark_enable_8259A_irq(struct irq_data *d)
-{
-	unsigned int mask;
-	if (d->irq<8) {
-	  mask = ~(1 << d->irq);
-	  cached_irq_mask[0] &= mask;
-	  outb(cached_irq_mask[0],0x21);
-	} else {
-	  mask = ~(1 << (d->irq-8));
-	  cached_irq_mask[1] &= mask;
-	  outb(cached_irq_mask[1],0xA1);
-	}
-}
-
-static void shark_ack_8259A_irq(struct irq_data *d){}
-
-static irqreturn_t bogus_int(int irq, void *dev_id)
-{
-	printk("Got interrupt %i!\n",irq);
-	return IRQ_NONE;
-}
-
-static struct irqaction cascade;
-
-static struct irq_chip fb_chip = {
-	.name		= "XT-PIC",
-	.irq_ack	= shark_ack_8259A_irq,
-	.irq_mask	= shark_disable_8259A_irq,
-	.irq_unmask	= shark_enable_8259A_irq,
-};
-
-void __init shark_init_irq(void)
-{
-	int irq;
-
-	for (irq = 0; irq < NR_IRQS; irq++) {
-		irq_set_chip_and_handler(irq, &fb_chip, handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	/* init master interrupt controller */
-	outb(0x11, 0x20); /* Start init sequence, edge triggered (level: 0x19)*/
-	outb(0x00, 0x21); /* Vector base */
-	outb(0x04, 0x21); /* Cascade (slave) on IRQ2 */
-	outb(0x03, 0x21); /* Select 8086 mode , auto eoi*/
-	outb(0x0A, 0x20);
-	/* init slave interrupt controller */
-	outb(0x11, 0xA0); /* Start init sequence, edge triggered */
-	outb(0x08, 0xA1); /* Vector base */
-	outb(0x02, 0xA1); /* Cascade (slave) on IRQ2 */
-	outb(0x03, 0xA1); /* Select 8086 mode, auto eoi */
-	outb(0x0A, 0xA0);
-	outb(cached_irq_mask[1],0xA1);
-	outb(cached_irq_mask[0],0x21);
-	//request_region(0x20,0x2,"pic1");
-	//request_region(0xA0,0x2,"pic2");
-
-	cascade.handler = bogus_int;
-	cascade.name = "cascade";
-	setup_irq(2,&cascade);
-}
-
diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c
deleted file mode 100644
index 081c778..0000000
--- a/arch/arm/mach-shark/leds.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * DIGITAL Shark LED control routines.
- *
- * Driver for the 3 user LEDs found on the Shark
- * Based on Versatile and RealView machine LED code
- *
- * License terms: GNU General Public License (GPL) version 2
- * Author: Bryan Wu <bryan.wu@canonical.com>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-
-#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
-struct shark_led {
-	struct led_classdev cdev;
-	u8 mask;
-};
-
-/*
- * The triggers lines up below will only be used if the
- * LED triggers are compiled in.
- */
-static const struct {
-	const char *name;
-	const char *trigger;
-} shark_leds[] = {
-	{ "shark:amber0", "default-on", },	/* Bit 5 */
-	{ "shark:green", "heartbeat", },	/* Bit 6 */
-	{ "shark:amber1", "cpu0" },		/* Bit 7 */
-};
-
-static u16 led_reg_read(void)
-{
-	outw(0x09, 0x24);
-	return inw(0x26);
-}
-
-static void led_reg_write(u16 value)
-{
-	outw(0x09, 0x24);
-	outw(value, 0x26);
-}
-
-static void shark_led_set(struct led_classdev *cdev,
-			      enum led_brightness b)
-{
-	struct shark_led *led = container_of(cdev,
-						 struct shark_led, cdev);
-	u16 reg = led_reg_read();
-
-	if (b != LED_OFF)
-		reg |= led->mask;
-	else
-		reg &= ~led->mask;
-
-	led_reg_write(reg);
-}
-
-static enum led_brightness shark_led_get(struct led_classdev *cdev)
-{
-	struct shark_led *led = container_of(cdev,
-						 struct shark_led, cdev);
-	u16 reg = led_reg_read();
-
-	return (reg & led->mask) ? LED_FULL : LED_OFF;
-}
-
-static int __init shark_leds_init(void)
-{
-	int i;
-	u16 reg;
-
-	if (!machine_is_shark())
-		return -ENODEV;
-
-	for (i = 0; i < ARRAY_SIZE(shark_leds); i++) {
-		struct shark_led *led;
-
-		led = kzalloc(sizeof(*led), GFP_KERNEL);
-		if (!led)
-			break;
-
-		led->cdev.name = shark_leds[i].name;
-		led->cdev.brightness_set = shark_led_set;
-		led->cdev.brightness_get = shark_led_get;
-		led->cdev.default_trigger = shark_leds[i].trigger;
-
-		/* Count in 5 bits offset */
-		led->mask = BIT(i + 5);
-
-		if (led_classdev_register(NULL, &led->cdev) < 0) {
-			kfree(led);
-			break;
-		}
-	}
-
-	/* Make LEDs independent of power-state */
-	request_region(0x24, 4, "led_reg");
-	reg = led_reg_read();
-	reg |= 1 << 10;
-	led_reg_write(reg);
-
-	return 0;
-}
-
-/*
- * Since we may have triggers on any subsystem, defer registration
- * until after subsystem_init.
- */
-fs_initcall(shark_leds_init);
-#endif
diff --git a/arch/arm/mach-shark/pci.c b/arch/arm/mach-shark/pci.c
deleted file mode 100644
index 6d91a91..0000000
--- a/arch/arm/mach-shark/pci.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- *  linux/arch/arm/mach-shark/pci.c
- *
- *  PCI bios-type initialisation for PCI machines
- *
- *  Bits taken from various places.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <video/vga.h>
-
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-#define IO_START	0x40000000
-
-static int __init shark_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (dev->bus->number == 0)
-		if (dev->devfn == 0)
-			return 255;
-		else
-			return 11;
-	else
-		return 255;
-}
-
-extern void __init via82c505_preinit(void);
-
-static struct hw_pci shark_pci __initdata = {
-	.setup		= via82c505_setup,
-	.map_irq	= shark_map_irq,
-	.nr_controllers = 1,
-	.ops		= &via82c505_ops,
-	.preinit	= via82c505_preinit,
-};
-
-static int __init shark_pci_init(void)
-{
-	if (!machine_is_shark())
-		return -ENODEV;
-
-	pcibios_min_io = 0x6000;
-	pcibios_min_mem = 0x50000000;
-	vga_base = 0xe8000000;
-
-	pci_ioremap_io(0, IO_START);
-
-	pci_common_init(&shark_pci);
-
-	return 0;
-}
-
-subsys_initcall(shark_pci_init);
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 3912ce9..a4a4b75 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -1,3 +1,35 @@
+config ARCH_SHMOBILE_MULTI
+	bool "SH-Mobile Series" if ARCH_MULTI_V7
+	depends on MMU
+	select CPU_V7
+	select GENERIC_CLOCKEVENTS
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_SMP
+	select ARM_GIC
+	select MIGHT_HAVE_CACHE_L2X0
+	select NO_IOPORT
+	select PINCTRL
+	select ARCH_REQUIRE_GPIOLIB
+	select CLKDEV_LOOKUP
+
+if ARCH_SHMOBILE_MULTI
+
+comment "SH-Mobile System Type"
+
+config ARCH_EMEV2
+	bool "Emma Mobile EV2"
+
+comment "SH-Mobile Board Type"
+
+config MACH_KZM9D
+	bool "KZM9D board"
+	depends on ARCH_EMEV2
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+
+comment "SH-Mobile System Configuration"
+endif
+
 if ARCH_SHMOBILE
 
 comment "SH-Mobile System Type"
@@ -23,9 +55,10 @@ config ARCH_R8A73A4
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
-	select HAVE_ARM_ARCH_TIMER
 	select SH_CLK_CPG
 	select RENESAS_IRQC
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
 
 config ARCH_R8A7740
 	bool "R-Mobile A1 (R8A77400)"
@@ -59,30 +92,45 @@ config ARCH_R8A7790
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
-	select HAVE_ARM_ARCH_TIMER
 	select SH_CLK_CPG
 	select RENESAS_IRQC
 
+config ARCH_R8A7791
+	bool "R-Car M2 (R8A77910)"
+	select ARM_GIC
+	select CPU_V7
+	select SH_CLK_CPG
+
 config ARCH_EMEV2
 	bool "Emma Mobile EV2"
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
 
-comment "SH-Mobile Board Type"
+config ARCH_R7S72100
+	bool "RZ/A1H (R7S72100)"
+	select ARM_GIC
+	select CPU_V7
+	select SH_CLK_CPG
 
-config MACH_AG5EVM
-	bool "AG5EVM board"
-	depends on ARCH_SH73A0
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SH_LCD_MIPI_DSI
+comment "SH-Mobile Board Type"
 
 config MACH_APE6EVM
 	bool "APE6EVM board"
 	depends on ARCH_R8A73A4
 	select USE_OF
 
+config MACH_APE6EVM_REFERENCE
+	bool "APE6EVM board - Reference Device Tree Implementation"
+	depends on ARCH_R8A73A4
+	select USE_OF
+	---help---
+	   Use reference implementation of APE6EVM board support
+	   which makes a greater use of device tree at the expense
+	   of not supporting a number of devices.
+
+	   This is intended to aid developers
+
 config MACH_MACKEREL
 	bool "mackerel board"
 	depends on ARCH_SH7372
@@ -91,12 +139,6 @@ config MACH_MACKEREL
 	select SND_SOC_AK4642 if SND_SIMPLE_CARD
 	select USE_OF
 
-config MACH_KOTA2
-	bool "KOTA2 board"
-	depends on ARCH_SH73A0
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-
 config MACH_ARMADILLO800EVA
 	bool "Armadillo-800 EVA board"
 	depends on ARCH_R8A7740
@@ -124,6 +166,28 @@ config MACH_BOCKW
 	depends on ARCH_R8A7778
 	select ARCH_REQUIRE_GPIOLIB
 	select RENESAS_INTC_IRQPIN
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select USE_OF
+	select SND_SOC_AK4554 if SND_SIMPLE_CARD
+	select SND_SOC_AK4642 if SND_SIMPLE_CARD
+
+config MACH_BOCKW_REFERENCE
+	bool "BOCK-W  - Reference Device Tree Implementation"
+	depends on ARCH_R8A7778
+	select ARCH_REQUIRE_GPIOLIB
+	select RENESAS_INTC_IRQPIN
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select USE_OF
+	---help---
+	   Use reference implementation of BockW board support
+	   which makes use of device tree at the expense
+	   of not supporting a number of devices.
+
+	   This is intended to aid developers
+
+config MACH_GENMAI
+	bool "Genmai board"
+	depends on ARCH_R7S72100
 	select USE_OF
 
 config MACH_MARZEN
@@ -131,6 +195,7 @@ config MACH_MARZEN
 	depends on ARCH_R8A7779
 	select ARCH_REQUIRE_GPIOLIB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select USE_OF
 
 config MACH_MARZEN_REFERENCE
 	bool "MARZEN board - Reference Device Tree Implementation"
@@ -150,6 +215,22 @@ config MACH_LAGER
 	depends on ARCH_R8A7790
 	select USE_OF
 
+config MACH_LAGER_REFERENCE
+	bool "Lager board - Reference Device Tree Implementation"
+	depends on ARCH_R8A7790
+	select USE_OF
+	---help---
+	   Use reference implementation of Lager board support
+	   which makes use of device tree at the expense
+	   of not supporting a number of devices.
+
+	   This is intended to aid developers
+
+config MACH_KOELSCH
+	bool "Koelsch board"
+	depends on ARCH_R8A7791
+	select USE_OF
+
 config MACH_KZM9D
 	bool "KZM9D board"
 	depends on ARCH_EMEV2
@@ -186,6 +267,15 @@ config CPU_HAS_INTEVT
         bool
 	default y
 
+config SH_CLK_CPG
+	bool
+
+source "drivers/sh/Kconfig"
+
+endif
+
+if ARCH_SHMOBILE || ARCH_SHMOBILE_MULTI
+
 menu "Timer and clock configuration"
 
 config SHMOBILE_TIMER_HZ
@@ -220,9 +310,4 @@ config EM_TIMER_STI
 
 endmenu
 
-config SH_CLK_CPG
-	bool
-
-source "drivers/sh/Kconfig"
-
 endif
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 6165a51..51db2bc 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -2,52 +2,79 @@
 # Makefile for the linux kernel.
 #
 
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/mach-shmobile/include
+
 # Common objects
-obj-y				:= timer.o console.o clock.o
+obj-y				:= timer.o console.o
 
 # CPU objects
-obj-$(CONFIG_ARCH_SH7372)	+= setup-sh7372.o clock-sh7372.o intc-sh7372.o
-obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o
-obj-$(CONFIG_ARCH_R8A73A4)	+= setup-r8a73a4.o clock-r8a73a4.o
-obj-$(CONFIG_ARCH_R8A7740)	+= setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o
-obj-$(CONFIG_ARCH_R8A7778)	+= setup-r8a7778.o clock-r8a7778.o
-obj-$(CONFIG_ARCH_R8A7779)	+= setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o
-obj-$(CONFIG_ARCH_R8A7790)	+= setup-r8a7790.o clock-r8a7790.o
-obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.o clock-emev2.o
+obj-$(CONFIG_ARCH_SH7372)	+= setup-sh7372.o intc-sh7372.o
+obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o intc-sh73a0.o
+obj-$(CONFIG_ARCH_R8A73A4)	+= setup-r8a73a4.o
+obj-$(CONFIG_ARCH_R8A7740)	+= setup-r8a7740.o
+obj-$(CONFIG_ARCH_R8A7778)	+= setup-r8a7778.o
+obj-$(CONFIG_ARCH_R8A7779)	+= setup-r8a7779.o
+obj-$(CONFIG_ARCH_R8A7790)	+= setup-r8a7790.o
+obj-$(CONFIG_ARCH_R8A7790)	+= setup-r8a7790.o setup-rcar-gen2.o
+obj-$(CONFIG_ARCH_R8A7791)	+= setup-r8a7791.o setup-rcar-gen2.o
+obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.o
+obj-$(CONFIG_ARCH_R7S72100)	+= setup-r7s72100.o
+
+# Clock objects
+ifndef CONFIG_COMMON_CLK
+obj-y				+= clock.o
+obj-$(CONFIG_ARCH_SH7372)	+= clock-sh7372.o
+obj-$(CONFIG_ARCH_SH73A0)	+= clock-sh73a0.o
+obj-$(CONFIG_ARCH_R8A73A4)	+= clock-r8a73a4.o
+obj-$(CONFIG_ARCH_R8A7740)	+= clock-r8a7740.o
+obj-$(CONFIG_ARCH_R8A7778)	+= clock-r8a7778.o
+obj-$(CONFIG_ARCH_R8A7779)	+= clock-r8a7779.o
+obj-$(CONFIG_ARCH_R8A7790)	+= clock-r8a7790.o
+obj-$(CONFIG_ARCH_R8A7791)	+= clock-r8a7791.o
+obj-$(CONFIG_ARCH_EMEV2)	+= clock-emev2.o
+obj-$(CONFIG_ARCH_R7S72100)	+= clock-r7s72100.o
+endif
 
 # SMP objects
 smp-y				:= platsmp.o headsmp.o
-smp-$(CONFIG_ARCH_SH73A0)	+= smp-sh73a0.o headsmp-scu.o
-smp-$(CONFIG_ARCH_R8A7779)	+= smp-r8a7779.o headsmp-scu.o
-smp-$(CONFIG_ARCH_EMEV2)	+= smp-emev2.o headsmp-scu.o
+smp-$(CONFIG_ARCH_SH73A0)	+= smp-sh73a0.o headsmp-scu.o platsmp-scu.o
+smp-$(CONFIG_ARCH_R8A7779)	+= smp-r8a7779.o headsmp-scu.o platsmp-scu.o
+smp-$(CONFIG_ARCH_R8A7790)	+= smp-r8a7790.o platsmp-apmu.o
+smp-$(CONFIG_ARCH_R8A7791)	+= smp-r8a7791.o platsmp-apmu.o
+smp-$(CONFIG_ARCH_EMEV2)	+= smp-emev2.o headsmp-scu.o platsmp-scu.o
 
 # IRQ objects
 obj-$(CONFIG_ARCH_SH7372)	+= entry-intc.o
-obj-$(CONFIG_ARCH_R8A7740)	+= entry-intc.o
 
 # PM objects
 obj-$(CONFIG_SUSPEND)		+= suspend.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
-obj-$(CONFIG_ARCH_SHMOBILE)	+= pm-rmobile.o
-obj-$(CONFIG_ARCH_SH7372)	+= pm-sh7372.o sleep-sh7372.o
-obj-$(CONFIG_ARCH_R8A7740)	+= pm-r8a7740.o
-obj-$(CONFIG_ARCH_R8A7779)	+= pm-r8a7779.o
+obj-$(CONFIG_ARCH_SH7372)	+= pm-sh7372.o sleep-sh7372.o pm-rmobile.o
 obj-$(CONFIG_ARCH_SH73A0)	+= pm-sh73a0.o
+obj-$(CONFIG_ARCH_R8A7740)	+= pm-r8a7740.o pm-rmobile.o
+obj-$(CONFIG_ARCH_R8A7779)	+= pm-r8a7779.o
 
 # Board objects
-obj-$(CONFIG_MACH_AG5EVM)	+= board-ag5evm.o
+ifdef CONFIG_ARCH_SHMOBILE_MULTI
+obj-$(CONFIG_MACH_KZM9D)	+= board-kzm9d-reference.o
+else
 obj-$(CONFIG_MACH_APE6EVM)	+= board-ape6evm.o
+obj-$(CONFIG_MACH_APE6EVM_REFERENCE)	+= board-ape6evm-reference.o
 obj-$(CONFIG_MACH_MACKEREL)	+= board-mackerel.o
-obj-$(CONFIG_MACH_KOTA2)	+= board-kota2.o
 obj-$(CONFIG_MACH_BOCKW)	+= board-bockw.o
+obj-$(CONFIG_MACH_BOCKW_REFERENCE)	+= board-bockw-reference.o
+obj-$(CONFIG_MACH_GENMAI)	+= board-genmai.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
 obj-$(CONFIG_MACH_MARZEN_REFERENCE)	+= board-marzen-reference.o
 obj-$(CONFIG_MACH_LAGER)	+= board-lager.o
+obj-$(CONFIG_MACH_LAGER_REFERENCE)	+= board-lager-reference.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE)	+= board-armadillo800eva-reference.o
+obj-$(CONFIG_MACH_KOELSCH)	+= board-koelsch.o
 obj-$(CONFIG_MACH_KZM9D)	+= board-kzm9d.o
 obj-$(CONFIG_MACH_KZM9G)	+= board-kzm9g.o
 obj-$(CONFIG_MACH_KZM9G_REFERENCE)	+= board-kzm9g-reference.o
+endif
 
 # Framework support
 obj-$(CONFIG_SMP)		+= $(smp-y)
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index 84c6868..391d72a 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -1,15 +1,18 @@
 # per-board load address for uImage
 loadaddr-y	:=
-loadaddr-$(CONFIG_MACH_AG5EVM) += 0x40008000
 loadaddr-$(CONFIG_MACH_APE6EVM) += 0x40008000
+loadaddr-$(CONFIG_MACH_APE6EVM_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
 loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
-loadaddr-$(CONFIG_MACH_KOTA2) += 0x41008000
+loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
+loadaddr-$(CONFIG_MACH_GENMAI) += 0x8008000
+loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000
 loadaddr-$(CONFIG_MACH_KZM9D) += 0x40008000
 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
 loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
 loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000
+loadaddr-$(CONFIG_MACH_LAGER_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_MACKEREL) += 0x40008000
 loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000
 loadaddr-$(CONFIG_MACH_MARZEN_REFERENCE) += 0x60008000
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
deleted file mode 100644
index c754071..0000000
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ /dev/null
@@ -1,672 +0,0 @@
-/*
- * arch/arm/mach-shmobile/board-ag5evm.c
- *
- * Copyright (C) 2010  Takashi Yoshii <yoshii.takashi.zj@renesas.com>
- * Copyright (C) 2009  Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/dma-mapping.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/serial_sci.h>
-#include <linux/smsc911x.h>
-#include <linux/gpio.h>
-#include <linux/videodev2.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/mfd/tmio.h>
-#include <linux/sh_clk.h>
-#include <linux/irqchip/arm-gic.h>
-#include <video/sh_mobile_lcdc.h>
-#include <video/sh_mipi_dsi.h>
-#include <sound/sh_fsi.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/sh73a0.h>
-#include <mach/common.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/traps.h>
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-static struct resource smsc9220_resources[] = {
-	[0] = {
-		.start		= 0x14000000,
-		.end		= 0x14000000 + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= SH73A0_PINT0_IRQ(2), /* PINTA2 */
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct smsc911x_platform_config smsc9220_platdata = {
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device eth_device = {
-	.name		= "smsc911x",
-	.id		= 0,
-	.dev  = {
-		.platform_data = &smsc9220_platdata,
-	},
-	.resource	= smsc9220_resources,
-	.num_resources	= ARRAY_SIZE(smsc9220_resources),
-};
-
-static struct sh_keysc_info keysc_platdata = {
-	.mode		= SH_KEYSC_MODE_6,
-	.scan_timing	= 3,
-	.delay		= 100,
-	.keycodes	= {
-		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, KEY_G,
-		KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, KEY_M, KEY_N,
-		KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U,
-		KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP,
-		KEY_SPACE, KEY_9, KEY_6, KEY_3, KEY_WAKEUP, KEY_RIGHT, \
-		KEY_COFFEE,
-		KEY_0, KEY_8, KEY_5, KEY_2, KEY_DOWN, KEY_ENTER, KEY_UP,
-		KEY_KPASTERISK, KEY_7, KEY_4, KEY_1, KEY_STOP, KEY_LEFT, \
-		KEY_COMPUTER,
-	},
-};
-
-static struct resource keysc_resources[] = {
-	[0] = {
-		.name	= "KEYSC",
-		.start	= 0xe61b0000,
-		.end	= 0xe61b0098 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(71),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device keysc_device = {
-	.name		= "sh_keysc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(keysc_resources),
-	.resource	= keysc_resources,
-	.dev		= {
-		.platform_data	= &keysc_platdata,
-	},
-};
-
-/* FSI A */
-static struct resource fsi_resources[] = {
-	[0] = {
-		.name	= "FSI",
-		.start	= 0xEC230000,
-		.end	= 0xEC230400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = gic_spi(146),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device fsi_device = {
-	.name		= "sh_fsi2",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(fsi_resources),
-	.resource	= fsi_resources,
-};
-
-/* Fixed 1.8V regulator to be used by MMCIF */
-static struct regulator_consumer_supply fixed1v8_power_consumers[] =
-{
-	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
-};
-
-static struct resource sh_mmcif_resources[] = {
-	[0] = {
-		.name	= "MMCIF",
-		.start	= 0xe6bd0000,
-		.end	= 0xe6bd00ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(141),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= gic_spi(140),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_platdata = {
-	.sup_pclk	= 0,
-	.ocr		= MMC_VDD_165_195,
-	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
-	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
-	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
-};
-
-static struct platform_device mmc_device = {
-	.name		= "sh_mmcif",
-	.id		= 0,
-	.dev		= {
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &sh_mmcif_platdata,
-	},
-	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
-	.resource	= sh_mmcif_resources,
-};
-
-/* IrDA */
-static struct resource irda_resources[] = {
-	[0] = {
-		.start	= 0xE6D00000,
-		.end	= 0xE6D01FD4 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(95),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device irda_device = {
-	.name           = "sh_irda",
-	.id		= 0,
-	.resource       = irda_resources,
-	.num_resources  = ARRAY_SIZE(irda_resources),
-};
-
-/* MIPI-DSI */
-static struct resource mipidsi0_resources[] = {
-	[0] = {
-		.name	= "DSI0",
-		.start  = 0xfeab0000,
-		.end    = 0xfeab3fff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "DSI0",
-		.start  = 0xfeab4000,
-		.end    = 0xfeab7fff,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static int sh_mipi_set_dot_clock(struct platform_device *pdev,
-				 void __iomem *base,
-				 int enable)
-{
-	struct clk *pck, *phy;
-	int ret;
-
-	pck = clk_get(&pdev->dev, "dsip_clk");
-	if (IS_ERR(pck)) {
-		ret = PTR_ERR(pck);
-		goto sh_mipi_set_dot_clock_pck_err;
-	}
-
-	phy = clk_get(&pdev->dev, "dsiphy_clk");
-	if (IS_ERR(phy)) {
-		ret = PTR_ERR(phy);
-		goto sh_mipi_set_dot_clock_phy_err;
-	}
-
-	if (enable) {
-		clk_set_rate(pck, clk_round_rate(pck,  24000000));
-		clk_set_rate(phy, clk_round_rate(pck, 510000000));
-		clk_enable(pck);
-		clk_enable(phy);
-	} else {
-		clk_disable(pck);
-		clk_disable(phy);
-	}
-
-	ret = 0;
-
-	clk_put(phy);
-sh_mipi_set_dot_clock_phy_err:
-	clk_put(pck);
-sh_mipi_set_dot_clock_pck_err:
-	return ret;
-}
-
-static struct sh_mipi_dsi_info mipidsi0_info = {
-	.data_format	= MIPI_RGB888,
-	.channel	= LCDC_CHAN_MAINLCD,
-	.lane		= 2,
-	.vsynw_offset	= 20,
-	.clksrc		= 1,
-	.flags		= SH_MIPI_DSI_HSABM		|
-			  SH_MIPI_DSI_SYNC_PULSES_MODE	|
-			  SH_MIPI_DSI_HSbyteCLK,
-	.set_dot_clock	= sh_mipi_set_dot_clock,
-};
-
-static struct platform_device mipidsi0_device = {
-	.name           = "sh-mipi-dsi",
-	.num_resources  = ARRAY_SIZE(mipidsi0_resources),
-	.resource       = mipidsi0_resources,
-	.id             = 0,
-	.dev	= {
-		.platform_data	= &mipidsi0_info,
-	},
-};
-
-static unsigned char lcd_backlight_seq[3][2] = {
-	{ 0x04, 0x07 },
-	{ 0x23, 0x80 },
-	{ 0x03, 0x01 },
-};
-
-static int lcd_backlight_set_brightness(int brightness)
-{
-	struct i2c_adapter *adap;
-	struct i2c_msg msg;
-	unsigned int i;
-	int ret;
-
-	if (brightness == 0) {
-		/* Reset the chip */
-		gpio_set_value(235, 0);
-		mdelay(24);
-		gpio_set_value(235, 1);
-		return 0;
-	}
-
-	adap = i2c_get_adapter(1);
-	if (adap == NULL)
-		return -ENODEV;
-
-	for (i = 0; i < ARRAY_SIZE(lcd_backlight_seq); i++) {
-		msg.addr = 0x6d;
-		msg.buf = &lcd_backlight_seq[i][0];
-		msg.len = 2;
-		msg.flags = 0;
-
-		ret = i2c_transfer(adap, &msg, 1);
-		if (ret < 0)
-			break;
-	}
-
-	i2c_put_adapter(adap);
-	return ret < 0 ? ret : 0;
-}
-
-/* LCDC0 */
-static const struct fb_videomode lcdc0_modes[] = {
-	{
-		.name		= "R63302(QHD)",
-		.xres		= 544,
-		.yres		= 961,
-		.left_margin	= 72,
-		.right_margin	= 600,
-		.hsync_len	= 16,
-		.upper_margin	= 8,
-		.lower_margin	= 8,
-		.vsync_len	= 2,
-		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
-	},
-};
-
-static struct sh_mobile_lcdc_info lcdc0_info = {
-	.clock_source = LCDC_CLK_PERIPHERAL,
-	.ch[0] = {
-		.chan = LCDC_CHAN_MAINLCD,
-		.interface_type = RGB24,
-		.clock_divider = 1,
-		.flags = LCDC_FLAGS_DWPOL,
-		.fourcc = V4L2_PIX_FMT_RGB565,
-		.lcd_modes = lcdc0_modes,
-		.num_modes = ARRAY_SIZE(lcdc0_modes),
-		.panel_cfg = {
-			.width = 44,
-			.height = 79,
-		},
-		.bl_info = {
-			.name = "sh_mobile_lcdc_bl",
-			.max_brightness = 1,
-			.set_brightness = lcd_backlight_set_brightness,
-		},
-		.tx_dev = &mipidsi0_device,
-	}
-};
-
-static struct resource lcdc0_resources[] = {
-	[0] = {
-		.name	= "LCDC0",
-		.start	= 0xfe940000, /* P4-only space */
-		.end	= 0xfe943fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x580),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lcdc0_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.num_resources	= ARRAY_SIZE(lcdc0_resources),
-	.resource	= lcdc0_resources,
-	.id             = 0,
-	.dev	= {
-		.platform_data	= &lcdc0_info,
-		.coherent_dma_mask = ~0,
-	},
-};
-
-/* Fixed 2.8V regulators to be used by SDHI0 */
-static struct regulator_consumer_supply fixed2v8_power_consumers[] =
-{
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
-};
-
-/* SDHI0 */
-static struct sh_mobile_sdhi_info sdhi0_info = {
-	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
-	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
-	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
-	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
-	.tmio_ocr_mask	= MMC_VDD_27_28 | MMC_VDD_28_29,
-	.cd_gpio	= 251,
-};
-
-static struct resource sdhi0_resources[] = {
-	[0] = {
-		.name	= "SDHI0",
-		.start	= 0xee100000,
-		.end	= 0xee1000ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT,
-		.start	= gic_spi(83),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
-		.start	= gic_spi(84),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
-		.start	= gic_spi(85),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi0_device = {
-	.name		= "sh_mobile_sdhi",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(sdhi0_resources),
-	.resource	= sdhi0_resources,
-	.dev	= {
-		.platform_data	= &sdhi0_info,
-	},
-};
-
-/* Fixed 3.3V regulator to be used by SDHI1 */
-static struct regulator_consumer_supply cn4_power_consumers[] =
-{
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
-};
-
-static struct regulator_init_data cn4_power_init_data = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(cn4_power_consumers),
-	.consumer_supplies      = cn4_power_consumers,
-};
-
-static struct fixed_voltage_config cn4_power_info = {
-	.supply_name = "CN4 SD/MMC Vdd",
-	.microvolts = 3300000,
-	.gpio = 114,
-	.enable_high = 1,
-	.init_data = &cn4_power_init_data,
-};
-
-static struct platform_device cn4_power = {
-	.name = "reg-fixed-voltage",
-	.id   = 2,
-	.dev  = {
-		.platform_data = &cn4_power_info,
-	},
-};
-
-static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
-{
-	static int power_gpio = -EINVAL;
-
-	if (power_gpio < 0) {
-		int ret = gpio_request_one(114, GPIOF_OUT_INIT_LOW,
-					   "sdhi1_power");
-		if (!ret)
-			power_gpio = 114;
-	}
-
-	/*
-	 * If requesting the GPIO above failed, it means, that the regulator got
-	 * probed and grabbed the GPIO, but we don't know, whether the sdhi
-	 * driver already uses the regulator. If it doesn't, we have to toggle
-	 * the GPIO ourselves, even though it is now owned by the fixed
-	 * regulator driver. We have to live with the race in case the driver
-	 * gets unloaded and the GPIO freed between these two steps.
-	 */
-	gpio_set_value(114, state);
-}
-
-static struct sh_mobile_sdhi_info sh_sdhi1_info = {
-	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
-	.tmio_caps	= MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
-	.tmio_ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.set_pwr	= ag5evm_sdhi1_set_pwr,
-};
-
-static struct resource sdhi1_resources[] = {
-	[0] = {
-		.name	= "SDHI1",
-		.start	= 0xee120000,
-		.end	= 0xee1200ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT,
-		.start	= gic_spi(87),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
-		.start	= gic_spi(88),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
-		.start	= gic_spi(89),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi1_device = {
-	.name		= "sh_mobile_sdhi",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &sh_sdhi1_info,
-	},
-	.num_resources	= ARRAY_SIZE(sdhi1_resources),
-	.resource	= sdhi1_resources,
-};
-
-static struct platform_device *ag5evm_devices[] __initdata = {
-	&cn4_power,
-	&eth_device,
-	&keysc_device,
-	&fsi_device,
-	&mmc_device,
-	&irda_device,
-	&mipidsi0_device,
-	&lcdc0_device,
-	&sdhi0_device,
-	&sdhi1_device,
-};
-
-static unsigned long pin_pullup_conf[] = {
-	PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
-};
-
-static const struct pinctrl_map ag5evm_pinctrl_map[] = {
-	/* FSIA */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
-				  "fsia_mclk_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
-				  "fsia_sclk_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
-				  "fsia_data_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
-				  "fsia_data_out", "fsia"),
-	/* I2C2 & I2C3 */
-	PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.2", "pfc-sh73a0",
-				  "i2c2_0", "i2c2"),
-	PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.3", "pfc-sh73a0",
-				  "i2c3_0", "i2c3"),
-	/* IrDA */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_irda.0", "pfc-sh73a0",
-				  "irda_0", "irda"),
-	/* KEYSC */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_in8", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out04", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out5", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out6_0", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out7_0", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out8_0", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out9_2", "keysc"),
-	PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				      "keysc_in8", pin_pullup_conf),
-	/* MMCIF */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				  "mmc0_data8_0", "mmc0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				  "mmc0_ctrl_0", "mmc0"),
-	PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				    "PORT279", pin_pullup_conf),
-	PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				      "mmc0_data8_0", pin_pullup_conf),
-	/* SCIFA2 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0",
-				  "scifa2_data_0", "scifa2"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0",
-				  "scifa2_ctrl_0", "scifa2"),
-	/* SDHI0 (CN15 [SD I/F]) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_data4", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_ctrl", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_wp", "sdhi0"),
-	/* SDHI1 (CN4 [WLAN I/F]) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
-				  "sdhi1_data4", "sdhi1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
-				  "sdhi1_ctrl", "sdhi1"),
-	PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
-				      "sdhi1_data4", pin_pullup_conf),
-	PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
-				    "PORT263", pin_pullup_conf),
-};
-
-static void __init ag5evm_init(void)
-{
-	regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
-				     ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
-	regulator_register_always_on(1, "fixed-2.8V", fixed2v8_power_consumers,
-				     ARRAY_SIZE(fixed2v8_power_consumers), 3300000);
-	regulator_register_fixed(3, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
-	pinctrl_register_mappings(ag5evm_pinctrl_map,
-				  ARRAY_SIZE(ag5evm_pinctrl_map));
-	sh73a0_pinmux_init();
-
-	/* enable MMCIF */
-	gpio_request_one(208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
-
-	/* enable SMSC911X */
-	gpio_request_one(144, GPIOF_IN, NULL); /* PINTA2 */
-	gpio_request_one(145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
-
-	/* LCD panel */
-	gpio_request_one(217, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
-	mdelay(1);
-	gpio_set_value(217, 1);
-	mdelay(100);
-
-	/* LCD backlight controller */
-	gpio_request_one(235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
-	lcd_backlight_set_brightness(0);
-
-#ifdef CONFIG_CACHE_L2X0
-	/* Shared attribute override enable, 64K*8way */
-	l2x0_init(IOMEM(0xf0100000), 0x00460000, 0xc2000fff);
-#endif
-	sh73a0_add_standard_devices();
-	platform_add_devices(ag5evm_devices, ARRAY_SIZE(ag5evm_devices));
-}
-
-MACHINE_START(AG5EVM, "ag5evm")
-	.smp		= smp_ops(sh73a0_smp_ops),
-	.map_io		= sh73a0_map_io,
-	.init_early	= sh73a0_add_early_devices,
-	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= sh73a0_init_irq,
-	.init_machine	= ag5evm_init,
-	.init_late	= shmobile_init_late,
-	.init_time	= sh73a0_earlytimer_init,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-ape6evm-reference.c b/arch/arm/mach-shmobile/board-ape6evm-reference.c
new file mode 100644
index 0000000..3276afc
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-ape6evm-reference.c
@@ -0,0 +1,63 @@
+/*
+ * APE6EVM board support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/platform_device.h>
+#include <linux/sh_clk.h>
+#include <mach/common.h>
+#include <mach/r8a73a4.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static void __init ape6evm_add_standard_devices(void)
+{
+
+	struct clk *parent;
+	struct clk *mp;
+
+	r8a73a4_clock_init();
+
+	/* MP clock parent = extal2 */
+	parent      = clk_get(NULL, "extal2");
+	mp          = clk_get(NULL, "mp");
+	BUG_ON(IS_ERR(parent) || IS_ERR(mp));
+
+	clk_set_parent(mp, parent);
+	clk_put(parent);
+	clk_put(mp);
+
+	r8a73a4_add_dt_devices();
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	platform_device_register_simple("cpufreq-cpu0", -1, NULL, 0);
+}
+
+static const char *ape6evm_boards_compat_dt[] __initdata = {
+	"renesas,ape6evm-reference",
+	NULL,
+};
+
+DT_MACHINE_START(APE6EVM_DT, "ape6evm")
+	.init_early	= r8a73a4_init_early,
+	.init_machine	= ape6evm_add_standard_devices,
+	.dt_compat	= ape6evm_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c
index 5eb0caa..0fa068e 100644
--- a/arch/arm/mach-shmobile/board-ape6evm.c
+++ b/arch/arm/mach-shmobile/board-ape6evm.c
@@ -19,9 +19,14 @@
  */
 
 #include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 #include <linux/interrupt.h>
-#include <linux/irqchip.h>
 #include <linux/kernel.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/fixed.h>
@@ -34,6 +39,58 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+/* LEDS */
+static struct gpio_led ape6evm_leds[] = {
+	{
+		.name		= "gnss-en",
+		.gpio		= 28,
+		.default_state	= LEDS_GPIO_DEFSTATE_OFF,
+	}, {
+		.name		= "nfc-nrst",
+		.gpio		= 126,
+		.default_state	= LEDS_GPIO_DEFSTATE_OFF,
+	}, {
+		.name		= "gnss-nrst",
+		.gpio		= 132,
+		.default_state	= LEDS_GPIO_DEFSTATE_OFF,
+	}, {
+		.name		= "bt-wakeup",
+		.gpio		= 232,
+		.default_state	= LEDS_GPIO_DEFSTATE_OFF,
+	}, {
+		.name		= "strobe",
+		.gpio		= 250,
+		.default_state	= LEDS_GPIO_DEFSTATE_OFF,
+	}, {
+		.name		= "bbresetout",
+		.gpio		= 288,
+		.default_state	= LEDS_GPIO_DEFSTATE_OFF,
+	},
+};
+
+static __initdata struct gpio_led_platform_data ape6evm_leds_pdata = {
+	.leds		= ape6evm_leds,
+	.num_leds	= ARRAY_SIZE(ape6evm_leds),
+};
+
+/* GPIO KEY */
+#define GPIO_KEY(c, g, d, ...) \
+	{ .code = c, .gpio = g, .desc = d, .active_low = 1 }
+
+static struct gpio_keys_button gpio_buttons[] = {
+	GPIO_KEY(KEY_0,			324,	"S16"),
+	GPIO_KEY(KEY_MENU,		325,	"S17"),
+	GPIO_KEY(KEY_HOME,		326,	"S18"),
+	GPIO_KEY(KEY_BACK,		327,	"S19"),
+	GPIO_KEY(KEY_VOLUMEUP,		328,	"S20"),
+	GPIO_KEY(KEY_VOLUMEDOWN,	329,	"S21"),
+};
+
+static struct gpio_keys_platform_data ape6evm_keys_pdata __initdata = {
+	.buttons	= gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(gpio_buttons),
+};
+
 /* Dummy supplies, where voltage doesn't matter */
 static struct regulator_consumer_supply dummy_supplies[] = {
 	REGULATOR_SUPPLY("vddvario", "smsc911x"),
@@ -41,7 +98,7 @@ static struct regulator_consumer_supply dummy_supplies[] = {
 };
 
 /* SMSC LAN9220 */
-static const struct resource lan9220_res[] = {
+static const struct resource lan9220_res[] __initconst = {
 	DEFINE_RES_MEM(0x08000000, 0x1000),
 	{
 		.start	= irq_pin(40), /* IRQ40 */
@@ -49,19 +106,119 @@ static const struct resource lan9220_res[] = {
 	},
 };
 
-static const struct smsc911x_platform_config lan9220_data = {
+static const struct smsc911x_platform_config lan9220_data __initconst = {
 	.flags		= SMSC911X_USE_32BIT,
 	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
 	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
 };
 
-static const struct pinctrl_map ape6evm_pinctrl_map[] = {
+/*
+ * MMC0 power supplies:
+ * Both Vcc and VccQ to eMMC on APE6EVM are supplied by a tps80032 voltage
+ * regulator. Until support for it is added to this file we simulate the
+ * Vcc supply by a fixed always-on regulator
+ */
+static struct regulator_consumer_supply vcc_mmc0_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+};
+
+/*
+ * SDHI0 power supplies:
+ * Vcc to SDHI0 on APE6EVM is supplied by a GPIO-switchable regulator. VccQ is
+ * provided by the same tps80032 regulator as both MMC0 voltages - see comment
+ * above
+ */
+static struct regulator_consumer_supply vcc_sdhi0_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+};
+
+static struct regulator_init_data vcc_sdhi0_init_data = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = ARRAY_SIZE(vcc_sdhi0_consumers),
+	.consumer_supplies      = vcc_sdhi0_consumers,
+};
+
+static const struct fixed_voltage_config vcc_sdhi0_info __initconst = {
+	.supply_name = "SDHI0 Vcc",
+	.microvolts = 3300000,
+	.gpio = 76,
+	.enable_high = 1,
+	.init_data = &vcc_sdhi0_init_data,
+};
+
+/*
+ * SDHI1 power supplies:
+ * Vcc and VccQ to SDHI1 on APE6EVM are both fixed at 3.3V
+ */
+static struct regulator_consumer_supply vcc_sdhi1_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+};
+
+/* MMCIF */
+static const struct sh_mmcif_plat_data mmcif0_pdata __initconst = {
+	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF0_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF0_RX,
+	.ccs_unsupported = true,
+};
+
+static const struct resource mmcif0_resources[] __initconst = {
+	DEFINE_RES_MEM_NAMED(0xee200000, 0x100, "MMCIF0"),
+	DEFINE_RES_IRQ(gic_spi(169)),
+};
+
+/* SDHI0 */
+static const struct sh_mobile_sdhi_info sdhi0_pdata __initconst = {
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE,
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
+};
+
+static const struct resource sdhi0_resources[] __initconst = {
+	DEFINE_RES_MEM_NAMED(0xee100000, 0x100, "SDHI0"),
+	DEFINE_RES_IRQ(gic_spi(165)),
+};
+
+/* SDHI1 */
+static const struct sh_mobile_sdhi_info sdhi1_pdata __initconst = {
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE,
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
+			  MMC_CAP_NEEDS_POLL,
+};
+
+static const struct resource sdhi1_resources[] __initconst = {
+	DEFINE_RES_MEM_NAMED(0xee120000, 0x100, "SDHI1"),
+	DEFINE_RES_IRQ(gic_spi(166)),
+};
+
+static const struct pinctrl_map ape6evm_pinctrl_map[] __initconst = {
 	/* SCIFA0 console */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a73a4",
 				  "scifa0_data", "scifa0"),
 	/* SMSC */
 	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a73a4",
 				  "irqc_irq40", "irqc"),
+	/* MMCIF0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a73a4",
+				  "mmc0_data8", "mmc0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a73a4",
+				  "mmc0_ctrl", "mmc0"),
+	/* SDHI0: uSD: no WP */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a73a4",
+				  "sdhi0_data4", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a73a4",
+				  "sdhi0_ctrl", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a73a4",
+				  "sdhi0_cd", "sdhi0"),
+	/* SDHI1 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a73a4",
+				  "sdhi1_data4", "sdhi1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a73a4",
+				  "sdhi1_ctrl", "sdhi1"),
 };
 
 static void __init ape6evm_add_standard_devices(void)
@@ -94,6 +251,28 @@ static void __init ape6evm_add_standard_devices(void)
 	platform_device_register_resndata(&platform_bus, "smsc911x", -1,
 					  lan9220_res, ARRAY_SIZE(lan9220_res),
 					  &lan9220_data, sizeof(lan9220_data));
+
+	regulator_register_always_on(1, "MMC0 Vcc", vcc_mmc0_consumers,
+				     ARRAY_SIZE(vcc_mmc0_consumers), 2800000);
+	platform_device_register_resndata(&platform_bus, "sh_mmcif", 0,
+					  mmcif0_resources, ARRAY_SIZE(mmcif0_resources),
+					  &mmcif0_pdata, sizeof(mmcif0_pdata));
+	platform_device_register_data(&platform_bus, "reg-fixed-voltage", 2,
+				      &vcc_sdhi0_info, sizeof(vcc_sdhi0_info));
+	platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 0,
+					  sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
+					  &sdhi0_pdata, sizeof(sdhi0_pdata));
+	regulator_register_always_on(3, "SDHI1 Vcc", vcc_sdhi1_consumers,
+				     ARRAY_SIZE(vcc_sdhi1_consumers), 3300000);
+	platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 1,
+					  sdhi1_resources, ARRAY_SIZE(sdhi1_resources),
+					  &sdhi1_pdata, sizeof(sdhi1_pdata));
+	platform_device_register_data(&platform_bus, "gpio-keys", -1,
+				      &ape6evm_keys_pdata,
+				      sizeof(ape6evm_keys_pdata));
+	platform_device_register_data(&platform_bus, "leds-gpio", -1,
+				      &ape6evm_leds_pdata,
+				      sizeof(ape6evm_leds_pdata));
 }
 
 static const char *ape6evm_boards_compat_dt[] __initdata = {
@@ -102,8 +281,7 @@ static const char *ape6evm_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(APE6EVM_DT, "ape6evm")
-	.init_irq	= irqchip_init,
-	.init_time	= shmobile_timer_init,
+	.init_early	= r8a73a4_init_early,
 	.init_machine	= ape6evm_add_standard_devices,
 	.dt_compat	= ape6evm_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
index 03b85fe..57d1a78 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
@@ -24,7 +24,6 @@
 #include <linux/kernel.h>
 #include <linux/gpio.h>
 #include <linux/io.h>
-#include <linux/pinctrl/machine.h>
 #include <mach/common.h>
 #include <mach/r8a7740.h>
 #include <asm/mach/arch.h>
@@ -119,12 +118,6 @@
  *	usbhsf_power_ctrl()
  */
 
-static const struct pinctrl_map eva_pinctrl_map[] = {
-	/* SCIFA1 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.1", "pfc-r8a7740",
-				  "scifa1_data", "scifa1"),
-};
-
 static void __init eva_clock_init(void)
 {
 	struct clk *system	= clk_get(NULL, "system_clk");
@@ -165,35 +158,26 @@ clock_error:
  */
 static void __init eva_init(void)
 {
-
 	r8a7740_clock_init(MD_CK0 | MD_CK2);
 	eva_clock_init();
 
-	pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map));
-	r8a7740_pinmux_init();
-
 	r8a7740_meram_workaround();
 
-	/*
-	 * Touchscreen
-	 * TODO: Move reset GPIO over to .dts when we can reference it
-	 */
-	gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */
-
 #ifdef CONFIG_CACHE_L2X0
 	/* Early BRESP enable, Shared attribute override enable, 32K*8way */
 	l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff);
 #endif
 
 	r8a7740_add_standard_devices_dt();
+
 	r8a7740_pm_init();
 }
 
 #define RESCNT2 IOMEM(0xe6188020)
-static void eva_restart(char mode, const char *cmd)
+static void eva_restart(enum reboot_mode mode, const char *cmd)
 {
 	/* Do soft power on reset */
-	writel((1 << 31), RESCNT2);
+	writel(1 << 31, RESCNT2);
 }
 
 static const char *eva_boards_compat_dt[] __initdata = {
@@ -206,7 +190,6 @@ DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva-reference")
 	.init_early	= r8a7740_init_delay,
 	.init_irq	= r8a7740_init_irq_of,
 	.init_machine	= eva_init,
-	.init_time	= shmobile_timer_init,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= eva_boards_compat_dt,
 	.restart	= eva_restart,
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index c5be60d..8bc8e4c 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -31,6 +31,8 @@
 #include <linux/gpio_keys.h>
 #include <linux/regulator/driver.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/platform_data/pwm-renesas-tpu.h>
+#include <linux/pwm_backlight.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/gpio-regulator.h>
 #include <linux/regulator/machine.h>
@@ -358,7 +360,6 @@ static struct platform_device usbhsf_device = {
 static struct sh_eth_plat_data sh_eth_platdata = {
 	.phy			= 0x00, /* LAN8710A */
 	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
-	.register_type		= SH_ETH_REG_GIGABIT,
 	.phy_interface		= PHY_INTERFACE_MODE_MII,
 };
 
@@ -387,7 +388,50 @@ static struct platform_device sh_eth_device = {
 	.num_resources = ARRAY_SIZE(sh_eth_resources),
 };
 
-/* LCDC */
+/* PWM */
+static struct resource pwm_resources[] = {
+	[0] = {
+		.start = 0xe6600000,
+		.end = 0xe66000ff,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct tpu_pwm_platform_data pwm_device_data = {
+	.channels[2] = {
+		.polarity = PWM_POLARITY_INVERSED,
+	}
+};
+
+static struct platform_device pwm_device = {
+	.name = "renesas-tpu-pwm",
+	.id = -1,
+	.dev = {
+		.platform_data = &pwm_device_data,
+	},
+	.num_resources = ARRAY_SIZE(pwm_resources),
+	.resource = pwm_resources,
+};
+
+static struct pwm_lookup pwm_lookup[] = {
+	PWM_LOOKUP("renesas-tpu-pwm", 2, "pwm-backlight.0", NULL),
+};
+
+/* LCDC and backlight */
+static struct platform_pwm_backlight_data pwm_backlight_data = {
+	.lth_brightness = 50,
+	.max_brightness = 255,
+	.dft_brightness = 255,
+	.pwm_period_ns = 33333, /* 30kHz */
+};
+
+static struct platform_device pwm_backlight_device = {
+	.name = "pwm-backlight",
+	.dev = {
+		.platform_data = &pwm_backlight_data,
+	},
+};
+
 static struct fb_videomode lcdc0_mode = {
 	.name		= "AMPIER/AM-800480",
 	.xres		= 800,
@@ -679,15 +723,6 @@ static struct platform_device vcc_sdhi1 = {
 };
 
 /* SDHI0 */
-/*
- * FIXME
- *
- * It use polling mode here, since
- * CD (= Card Detect) pin is not connected to SDHI0_CD.
- * We can use IRQ31 as card detect irq,
- * but it needs chattering removal operation
- */
-#define IRQ31	irq_pin(31)
 static struct sh_mobile_sdhi_info sdhi0_info = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
@@ -788,6 +823,9 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = {
 	.caps		= MMC_CAP_4_BIT_DATA |
 			  MMC_CAP_8_BIT_DATA |
 			  MMC_CAP_NONREMOVABLE,
+	.ccs_unsupported = true,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct resource sh_mmcif_resources[] = {
@@ -1030,6 +1068,8 @@ static struct i2c_board_info i2c2_devices[] = {
  */
 static struct platform_device *eva_devices[] __initdata = {
 	&lcdc0_device,
+	&pwm_device,
+	&pwm_backlight_device,
 	&gpio_keys_device,
 	&sh_eth_device,
 	&vcc_sdhi0,
@@ -1069,9 +1109,9 @@ static const struct pinctrl_map eva_pinctrl_map[] = {
 	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-r8a7740",
 				  "fsib_mclk_in", "fsib"),
 	/* GETHER */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740",
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740",
 				  "gether_mii", "gether"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740",
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740",
 				  "gether_int", "gether"),
 	/* HDMI */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-r8a7740",
@@ -1101,6 +1141,9 @@ static const struct pinctrl_map eva_pinctrl_map[] = {
 	/* ST1232 */
 	PIN_MAP_MUX_GROUP_DEFAULT("0-0055", "pfc-r8a7740",
 				  "intc_irq10", "intc"),
+	/* TPU0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("renesas-tpu-pwm", "pfc-r8a7740",
+				  "tpu0_to2_1", "tpu0"),
 	/* USBHS */
 	PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7740",
 				  "intc_irq7_1", "intc"),
@@ -1154,13 +1197,13 @@ static void __init eva_init(void)
 				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
 
 	pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map));
+	pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
 
 	r8a7740_pinmux_init();
 	r8a7740_meram_workaround();
 
 	/* LCDC0 */
 	gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
-	gpio_request_one(202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */
 
 	/* GETHER */
 	gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */
@@ -1271,7 +1314,7 @@ static const char *eva_boards_compat_dt[] __initdata = {
 DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva")
 	.map_io		= r8a7740_map_io,
 	.init_early	= eva_add_early_devices,
-	.init_irq	= r8a7740_init_irq,
+	.init_irq	= r8a7740_init_irq_of,
 	.init_machine	= eva_init,
 	.init_late	= shmobile_init_late,
 	.init_time	= eva_earlytimer_init,
diff --git a/arch/arm/mach-shmobile/board-bockw-reference.c b/arch/arm/mach-shmobile/board-bockw-reference.c
new file mode 100644
index 0000000..ae88fda
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-bockw-reference.c
@@ -0,0 +1,81 @@
+/*
+ * Bock-W board support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/of_platform.h>
+#include <linux/pinctrl/machine.h>
+#include <mach/common.h>
+#include <mach/r8a7778.h>
+#include <asm/mach/arch.h>
+
+/*
+ *	see board-bock.c for checking detail of dip-switch
+ */
+
+static const struct pinctrl_map bockw_pinctrl_map[] = {
+	/* SCIF0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
+				  "scif0_data_a", "scif0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
+				  "scif0_ctrl", "scif0"),
+};
+
+#define FPGA	0x18200000
+#define IRQ0MR	0x30
+#define COMCTLR	0x101c
+static void __init bockw_init(void)
+{
+	static void __iomem *fpga;
+
+	r8a7778_clock_init();
+	r8a7778_init_irq_extpin_dt(1);
+
+	pinctrl_register_mappings(bockw_pinctrl_map,
+				  ARRAY_SIZE(bockw_pinctrl_map));
+	r8a7778_pinmux_init();
+	r8a7778_add_dt_devices();
+
+	fpga = ioremap_nocache(FPGA, SZ_1M);
+	if (fpga) {
+		/*
+		 * CAUTION
+		 *
+		 * IRQ0/1 is cascaded interrupt from FPGA.
+		 * it should be cared in the future
+		 * Now, it is assuming IRQ0 was used only from SMSC.
+		 */
+		u16 val = ioread16(fpga + IRQ0MR);
+		val &= ~(1 << 4); /* enable SMSC911x */
+		iowrite16(val, fpga + IRQ0MR);
+	}
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *bockw_boards_compat_dt[] __initdata = {
+	"renesas,bockw-reference",
+	NULL,
+};
+
+DT_MACHINE_START(BOCKW_DT, "bockw")
+	.init_early	= r8a7778_init_delay,
+	.init_irq	= r8a7778_init_irq_dt,
+	.init_machine	= bockw_init,
+	.dt_compat	= bockw_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c
index 3354a85..38611526 100644
--- a/arch/arm/mach-shmobile/board-bockw.c
+++ b/arch/arm/mach-shmobile/board-bockw.c
@@ -3,6 +3,7 @@
  *
  * Copyright (C) 2013  Renesas Solutions Corp.
  * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ * Copyright (C) 2013  Cogent Embedded, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,18 +21,30 @@
 
 #include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/mmc/sh_mmcif.h>
 #include <linux/mtd/partitions.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/platform_data/usb-rcar-phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/smsc911x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#include <linux/usb/renesas_usbhs.h>
+#include <media/soc_camera.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r8a7778.h>
 #include <asm/mach/arch.h>
+#include <sound/rcar_snd.h>
+#include <sound/simple_card.h>
+
+#define FPGA	0x18200000
+#define IRQ0MR	0x30
+#define COMCTLR	0x101c
+static void __iomem *fpga;
 
 /*
  *	CN9(Upper side) SCIF/RCAN selection
@@ -58,38 +71,152 @@
  * SW19	(MMC)	1 pin
  */
 
+/*
+ *	SSI settings
+ *
+ * SW45: 1-4 side	(SSI5 out, ROUT/LOUT CN19 Mid)
+ * SW46: 1101		(SSI6 Recorde)
+ * SW47: 1110		(SSI5 Playback)
+ * SW48: 11		(Recorde power)
+ * SW49: 1		(SSI slave mode)
+ * SW50: 1111		(SSI7, SSI8)
+ * SW51: 1111		(SSI3, SSI4)
+ * SW54: 1pin		(ak4554 FPGA control)
+ * SW55: 1		(CLKB is 24.5760MHz)
+ * SW60: 1pin		(ak4554 FPGA control)
+ * SW61: 3pin		(use X11 clock)
+ * SW78: 3-6		(ak4642 connects I2C0)
+ *
+ * You can use sound as
+ *
+ * hw0: CN19: SSI56-AK4643
+ * hw1: CN21: SSI3-AK4554(playback)
+ * hw2: CN21: SSI4-AK4554(capture)
+ * hw3: CN20: SSI7-AK4554(playback)
+ * hw4: CN20: SSI8-AK4554(capture)
+ *
+ * this command is required when playback on hw0.
+ *
+ * # amixer set "LINEOUT Mixer DACL" on
+ */
+
+/*
+ * USB
+ *
+ * USB1 (CN29) can be Host/Function
+ *
+ *		Host	Func
+ * SW98		1	2
+ * SW99		1	3
+ */
+
 /* Dummy supplies, where voltage doesn't matter */
 static struct regulator_consumer_supply dummy_supplies[] = {
 	REGULATOR_SUPPLY("vddvario", "smsc911x"),
 	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
 };
 
-static struct smsc911x_platform_config smsc911x_data = {
+static struct smsc911x_platform_config smsc911x_data __initdata = {
 	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
 	.flags		= SMSC911X_USE_32BIT,
 	.phy_interface	= PHY_INTERFACE_MODE_MII,
 };
 
-static struct resource smsc911x_resources[] = {
+static struct resource smsc911x_resources[] __initdata = {
 	DEFINE_RES_MEM(0x18300000, 0x1000),
 	DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */
 };
 
+#if IS_ENABLED(CONFIG_USB_RENESAS_USBHS_UDC)
+/*
+ * When USB1 is Func
+ */
+static int usbhsf_get_id(struct platform_device *pdev)
+{
+	return USBHS_GADGET;
+}
+
+#define SUSPMODE	0x102
+static int usbhsf_power_ctrl(struct platform_device *pdev,
+			     void __iomem *base, int enable)
+{
+	enable = !!enable;
+
+	r8a7778_usb_phy_power(enable);
+
+	iowrite16(enable << 14, base + SUSPMODE);
+
+	return 0;
+}
+
+static struct resource usbhsf_resources[] __initdata = {
+	DEFINE_RES_MEM(0xffe60000, 0x110),
+	DEFINE_RES_IRQ(gic_iid(0x4f)),
+};
+
+static struct renesas_usbhs_platform_info usbhs_info __initdata = {
+	.platform_callback = {
+		.get_id		= usbhsf_get_id,
+		.power_ctrl	= usbhsf_power_ctrl,
+	},
+	.driver_param = {
+		.buswait_bwait	= 4,
+	},
+};
+
+#define USB_PHY_SETTING {.port1_func = 1, .ovc_pin[1].active_high = 1,}
+#define USB1_DEVICE	"renesas_usbhs"
+#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE()			\
+	platform_device_register_resndata(			\
+		&platform_bus, "renesas_usbhs", -1,		\
+		usbhsf_resources,				\
+		ARRAY_SIZE(usbhsf_resources),			\
+		&usbhs_info, sizeof(struct renesas_usbhs_platform_info))
+
+#else
+/*
+ * When USB1 is Host
+ */
+#define USB_PHY_SETTING { }
+#define USB1_DEVICE	"ehci-platform"
+#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE()
+
+#endif
+
 /* USB */
-static struct rcar_phy_platform_data usb_phy_platform_data __initdata;
+static struct resource usb_phy_resources[] __initdata = {
+	DEFINE_RES_MEM(0xffe70800, 0x100),
+	DEFINE_RES_MEM(0xffe76000, 0x100),
+};
+
+static struct rcar_phy_platform_data usb_phy_platform_data __initdata =
+	USB_PHY_SETTING;
+
 
 /* SDHI */
-static struct sh_mobile_sdhi_info sdhi0_info = {
+static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
+	.dma_slave_tx	= HPBDMA_SLAVE_SDHI0_TX,
+	.dma_slave_rx	= HPBDMA_SLAVE_SDHI0_RX,
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
 	.tmio_ocr_mask	= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
 };
 
+static struct resource sdhi0_resources[] __initdata = {
+	DEFINE_RES_MEM(0xFFE4C000, 0x100),
+	DEFINE_RES_IRQ(gic_iid(0x77)),
+};
+
+/* Ether */
+static struct resource ether_resources[] __initdata = {
+	DEFINE_RES_MEM(0xfde00000, 0x400),
+	DEFINE_RES_IRQ(gic_iid(0x89)),
+};
+
 static struct sh_eth_plat_data ether_platform_data __initdata = {
 	.phy		= 0x01,
 	.edmac_endian	= EDMAC_LITTLE_ENDIAN,
-	.register_type	= SH_ETH_REG_FAST_RCAR,
 	.phy_interface	= PHY_INTERFACE_MODE_RMII,
 	/*
 	 * Although the LINK signal is available on the board, it's connected to
@@ -104,7 +231,9 @@ static struct sh_eth_plat_data ether_platform_data __initdata = {
 static struct i2c_board_info i2c0_devices[] = {
 	{
 		I2C_BOARD_INFO("rx8581", 0x51),
-	},
+	}, {
+		I2C_BOARD_INFO("ak4643", 0x12),
+	}
 };
 
 /* HSPI*/
@@ -135,7 +264,12 @@ static struct spi_board_info spi_board_info[] __initdata = {
 };
 
 /* MMC */
-static struct sh_mmcif_plat_data sh_mmcif_plat = {
+static struct resource mmc_resources[] __initdata = {
+	DEFINE_RES_MEM(0xffe4e000, 0x100),
+	DEFINE_RES_IRQ(gic_iid(0x5d)),
+};
+
+static struct sh_mmcif_plat_data sh_mmcif_plat __initdata = {
 	.sup_pclk	= 0,
 	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
 	.caps		= MMC_CAP_4_BIT_DATA |
@@ -143,7 +277,252 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = {
 			  MMC_CAP_NEEDS_POLL,
 };
 
+/* In the default configuration both decoders reside on I2C bus 0 */
+#define BOCKW_CAMERA(idx)						\
+static struct i2c_board_info camera##idx##_info = {			\
+	I2C_BOARD_INFO("ml86v7667", 0x41 + 2 * (idx)),			\
+};									\
+									\
+static struct soc_camera_link iclink##idx##_ml86v7667 __initdata = {	\
+	.bus_id		= idx,						\
+	.i2c_adapter_id	= 0,						\
+	.board_info	= &camera##idx##_info,				\
+}
+
+BOCKW_CAMERA(0);
+BOCKW_CAMERA(1);
+
+/* VIN */
+static struct rcar_vin_platform_data vin_platform_data __initdata = {
+	.flags	= RCAR_VIN_BT656,
+};
+
+#define R8A7778_VIN(idx)						\
+static struct resource vin##idx##_resources[] __initdata = {		\
+	DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000),		\
+	DEFINE_RES_IRQ(gic_iid(0x5a)),					\
+};									\
+									\
+static struct platform_device_info vin##idx##_info __initdata = {	\
+	.parent		= &platform_bus,				\
+	.name		= "r8a7778-vin",				\
+	.id		= idx,						\
+	.res		= vin##idx##_resources,				\
+	.num_res	= ARRAY_SIZE(vin##idx##_resources),		\
+	.dma_mask	= DMA_BIT_MASK(32),				\
+	.data		= &vin_platform_data,				\
+	.size_data	= sizeof(vin_platform_data),			\
+}
+R8A7778_VIN(0);
+R8A7778_VIN(1);
+
+/* Sound */
+static struct resource rsnd_resources[] __initdata = {
+	[RSND_GEN1_SRU] = DEFINE_RES_MEM(0xffd90000, 0x1000),
+	[RSND_GEN1_SSI] = DEFINE_RES_MEM(0xffd91000, 0x1240),
+	[RSND_GEN1_ADG] = DEFINE_RES_MEM(0xfffe0000, 0x24),
+};
+
+static struct rsnd_ssi_platform_info rsnd_ssi[] = {
+	RSND_SSI_UNUSED, /* SSI 0 */
+	RSND_SSI_UNUSED, /* SSI 1 */
+	RSND_SSI_UNUSED, /* SSI 2 */
+	RSND_SSI_SET(1, 0, gic_iid(0x85), RSND_SSI_PLAY),
+	RSND_SSI_SET(2, 0, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE | RSND_SSI_CLK_FROM_ADG),
+	RSND_SSI_SET(0, 0, gic_iid(0x86), RSND_SSI_PLAY),
+	RSND_SSI_SET(0, 0, gic_iid(0x86), 0),
+	RSND_SSI_SET(3, 0, gic_iid(0x86), RSND_SSI_PLAY),
+	RSND_SSI_SET(4, 0, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE | RSND_SSI_CLK_FROM_ADG),
+};
+
+static struct rsnd_scu_platform_info rsnd_scu[9] = {
+	/* no member at this point */
+};
+
+enum {
+	AK4554_34 = 0,
+	AK4643_56,
+	AK4554_78,
+	SOUND_MAX,
+};
+
+static int rsnd_codec_power(int id, int enable)
+{
+	static int sound_user[SOUND_MAX] = {0, 0, 0};
+	int *usr = NULL;
+	u32 bit;
+
+	switch (id) {
+	case 3:
+	case 4:
+		usr = sound_user + AK4554_34;
+		bit = (1 << 10);
+		break;
+	case 5:
+	case 6:
+		usr = sound_user + AK4643_56;
+		bit = (1 << 6);
+		break;
+	case 7:
+	case 8:
+		usr = sound_user + AK4554_78;
+		bit = (1 << 7);
+		break;
+	}
+
+	if (!usr)
+		return -EIO;
+
+	if (enable) {
+		if (*usr == 0) {
+			u32 val = ioread16(fpga + COMCTLR);
+			val &= ~bit;
+			iowrite16(val, fpga + COMCTLR);
+		}
+
+		(*usr)++;
+	} else {
+		if (*usr == 0)
+			return 0;
+
+		(*usr)--;
+
+		if (*usr == 0) {
+			u32 val = ioread16(fpga + COMCTLR);
+			val |= bit;
+			iowrite16(val, fpga + COMCTLR);
+		}
+	}
+
+	return 0;
+}
+
+static int rsnd_start(int id)
+{
+	return rsnd_codec_power(id, 1);
+}
+
+static int rsnd_stop(int id)
+{
+	return rsnd_codec_power(id, 0);
+}
+
+static struct rcar_snd_info rsnd_info = {
+	.flags		= RSND_GEN1,
+	.ssi_info	= rsnd_ssi,
+	.ssi_info_nr	= ARRAY_SIZE(rsnd_ssi),
+	.scu_info	= rsnd_scu,
+	.scu_info_nr	= ARRAY_SIZE(rsnd_scu),
+	.start		= rsnd_start,
+	.stop		= rsnd_stop,
+};
+
+static struct asoc_simple_card_info rsnd_card_info[] = {
+	/* SSI5, SSI6 */
+	{
+		.name		= "AK4643",
+		.card		= "SSI56-AK4643",
+		.codec		= "ak4642-codec.0-0012",
+		.platform	= "rcar_sound",
+		.daifmt		= SND_SOC_DAIFMT_LEFT_J,
+		.cpu_dai = {
+			.name	= "rsnd-dai.0",
+			.fmt	= SND_SOC_DAIFMT_CBS_CFS,
+		},
+		.codec_dai = {
+			.name	= "ak4642-hifi",
+			.fmt	= SND_SOC_DAIFMT_CBM_CFM,
+			.sysclk	= 11289600,
+		},
+	},
+	/* SSI3 */
+	{
+		.name		= "AK4554",
+		.card		= "SSI3-AK4554(playback)",
+		.codec		= "ak4554-adc-dac.0",
+		.platform	= "rcar_sound",
+		.cpu_dai = {
+			.name	= "rsnd-dai.1",
+			.fmt	= SND_SOC_DAIFMT_CBM_CFM |
+				  SND_SOC_DAIFMT_RIGHT_J,
+		},
+		.codec_dai = {
+			.name	= "ak4554-hifi",
+		},
+	},
+	/* SSI4 */
+	{
+		.name		= "AK4554",
+		.card		= "SSI4-AK4554(capture)",
+		.codec		= "ak4554-adc-dac.0",
+		.platform	= "rcar_sound",
+		.cpu_dai = {
+			.name	= "rsnd-dai.2",
+			.fmt	= SND_SOC_DAIFMT_CBM_CFM |
+				  SND_SOC_DAIFMT_LEFT_J,
+		},
+		.codec_dai = {
+			.name	= "ak4554-hifi",
+		},
+	},
+	/* SSI7 */
+	{
+		.name		= "AK4554",
+		.card		= "SSI7-AK4554(playback)",
+		.codec		= "ak4554-adc-dac.1",
+		.platform	= "rcar_sound",
+		.cpu_dai = {
+			.name	= "rsnd-dai.3",
+			.fmt	= SND_SOC_DAIFMT_CBM_CFM |
+				  SND_SOC_DAIFMT_RIGHT_J,
+		},
+		.codec_dai = {
+			.name	= "ak4554-hifi",
+		},
+	},
+	/* SSI8 */
+	{
+		.name		= "AK4554",
+		.card		= "SSI8-AK4554(capture)",
+		.codec		= "ak4554-adc-dac.1",
+		.platform	= "rcar_sound",
+		.cpu_dai = {
+			.name	= "rsnd-dai.4",
+			.fmt	= SND_SOC_DAIFMT_CBM_CFM |
+				  SND_SOC_DAIFMT_LEFT_J,
+		},
+		.codec_dai = {
+			.name	= "ak4554-hifi",
+		},
+	}
+};
+
 static const struct pinctrl_map bockw_pinctrl_map[] = {
+	/* AUDIO */
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "audio_clk_a", "audio_clk"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "audio_clk_b", "audio_clk"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi34_ctrl", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi3_data", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi4_data", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi5_ctrl", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi5_data", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi6_ctrl", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi6_data", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi78_ctrl", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi7_data", "ssi"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
+				  "ssi8_data", "ssi"),
 	/* Ether */
 	PIN_MAP_MUX_GROUP_DEFAULT("r8a777x-ether", "pfc-r8a7778",
 				  "ether_rmii", "ether"),
@@ -163,7 +542,7 @@ static const struct pinctrl_map bockw_pinctrl_map[] = {
 	/* USB */
 	PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778",
 				  "usb0", "usb0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778",
+	PIN_MAP_MUX_GROUP_DEFAULT(USB1_DEVICE, "pfc-r8a7778",
 				  "usb1", "usb1"),
 	/* SDHI0 */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
@@ -174,24 +553,46 @@ static const struct pinctrl_map bockw_pinctrl_map[] = {
 				  "sdhi0_cd", "sdhi0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
 				  "sdhi0_wp", "sdhi0"),
+	/* VIN0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778",
+				  "vin0_clk", "vin0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778",
+				  "vin0_data8", "vin0"),
+	/* VIN1 */
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778",
+				  "vin1_clk", "vin1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778",
+				  "vin1_data8", "vin1"),
 };
 
-#define FPGA	0x18200000
-#define IRQ0MR	0x30
 #define PFC	0xfffc0000
 #define PUPR4	0x110
 static void __init bockw_init(void)
 {
 	void __iomem *base;
+	struct clk *clk;
+	int i;
 
 	r8a7778_clock_init();
 	r8a7778_init_irq_extpin(1);
 	r8a7778_add_standard_devices();
-	r8a7778_add_usb_phy_device(&usb_phy_platform_data);
-	r8a7778_add_ether_device(&ether_platform_data);
-	r8a7778_add_i2c_device(0);
-	r8a7778_add_hspi_device(0);
-	r8a7778_add_mmc_device(&sh_mmcif_plat);
+
+	platform_device_register_resndata(&platform_bus, "r8a777x-ether", -1,
+					  ether_resources,
+					  ARRAY_SIZE(ether_resources),
+					  &ether_platform_data,
+					  sizeof(ether_platform_data));
+
+	platform_device_register_full(&vin0_info);
+	/* VIN1 has a pin conflict with Ether */
+	if (!IS_ENABLED(CONFIG_SH_ETH))
+		platform_device_register_full(&vin1_info);
+	platform_device_register_data(&platform_bus, "soc-camera-pdrv", 0,
+				      &iclink0_ml86v7667,
+				      sizeof(iclink0_ml86v7667));
+	platform_device_register_data(&platform_bus, "soc-camera-pdrv", 1,
+				      &iclink1_ml86v7667,
+				      sizeof(iclink1_ml86v7667));
 
 	i2c_register_board_info(0, i2c0_devices,
 				ARRAY_SIZE(i2c0_devices));
@@ -201,9 +602,22 @@ static void __init bockw_init(void)
 				  ARRAY_SIZE(bockw_pinctrl_map));
 	r8a7778_pinmux_init();
 
+	platform_device_register_resndata(
+		&platform_bus, "sh_mmcif", -1,
+		mmc_resources, ARRAY_SIZE(mmc_resources),
+		&sh_mmcif_plat, sizeof(struct sh_mmcif_plat_data));
+
+	platform_device_register_resndata(
+		&platform_bus, "rcar_usb_phy", -1,
+		usb_phy_resources,
+		ARRAY_SIZE(usb_phy_resources),
+		&usb_phy_platform_data,
+		sizeof(struct rcar_phy_platform_data));
+
+
 	/* for SMSC */
-	base = ioremap_nocache(FPGA, SZ_1M);
-	if (base) {
+	fpga = ioremap_nocache(FPGA, SZ_1M);
+	if (fpga) {
 		/*
 		 * CAUTION
 		 *
@@ -211,10 +625,9 @@ static void __init bockw_init(void)
 		 * it should be cared in the future
 		 * Now, it is assuming IRQ0 was used only from SMSC.
 		 */
-		u16 val = ioread16(base + IRQ0MR);
+		u16 val = ioread16(fpga + IRQ0MR);
 		val &= ~(1 << 4); /* enable SMSC911x */
-		iowrite16(val, base + IRQ0MR);
-		iounmap(base);
+		iowrite16(val, fpga + IRQ0MR);
 
 		regulator_register_fixed(0, dummy_supplies,
 					 ARRAY_SIZE(dummy_supplies));
@@ -236,10 +649,49 @@ static void __init bockw_init(void)
 		iowrite32(ioread32(base + PUPR4) | (3 << 26), base + PUPR4);
 		iounmap(base);
 
-		r8a7778_sdhi_init(0, &sdhi0_info);
+		platform_device_register_resndata(
+			&platform_bus, "sh_mobile_sdhi", 0,
+			sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
+			&sdhi0_info, sizeof(struct sh_mobile_sdhi_info));
+	}
+
+	/* for Audio */
+	clk = clk_get(NULL, "audio_clk_b");
+	clk_set_rate(clk, 24576000);
+	clk_put(clk);
+	rsnd_codec_power(5, 1); /* enable ak4642 */
+
+	platform_device_register_simple(
+		"ak4554-adc-dac", 0, NULL, 0);
+
+	platform_device_register_simple(
+		"ak4554-adc-dac", 1, NULL, 0);
+
+	platform_device_register_resndata(
+		&platform_bus, "rcar_sound", -1,
+		rsnd_resources, ARRAY_SIZE(rsnd_resources),
+		&rsnd_info, sizeof(rsnd_info));
+
+	for (i = 0; i < ARRAY_SIZE(rsnd_card_info); i++) {
+		struct platform_device_info cardinfo = {
+			.parent         = &platform_bus,
+			.name           = "asoc-simple-card",
+			.id             = i,
+			.data           = &rsnd_card_info[i],
+			.size_data      = sizeof(struct asoc_simple_card_info),
+			.dma_mask       = ~0,
+		};
+
+		platform_device_register_full(&cardinfo);
 	}
 }
 
+static void __init bockw_init_late(void)
+{
+	r8a7778_init_late();
+	ADD_USB_FUNC_DEVICE_IF_POSSIBLE();
+}
+
 static const char *bockw_boards_compat_dt[] __initdata = {
 	"renesas,bockw",
 	NULL,
@@ -249,7 +701,6 @@ DT_MACHINE_START(BOCKW_DT, "bockw")
 	.init_early	= r8a7778_init_delay,
 	.init_irq	= r8a7778_init_irq_dt,
 	.init_machine	= bockw_init,
-	.init_time	= shmobile_timer_init,
 	.dt_compat	= bockw_boards_compat_dt,
-	.init_late      = r8a7778_init_late,
+	.init_late      = bockw_init_late,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-genmai.c b/arch/arm/mach-shmobile/board-genmai.c
new file mode 100644
index 0000000..3e92e3c
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-genmai.c
@@ -0,0 +1,43 @@
+/*
+ * Genmai board support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <mach/common.h>
+#include <mach/r7s72100.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static void __init genmai_add_standard_devices(void)
+{
+	r7s72100_clock_init();
+	r7s72100_add_dt_devices();
+}
+
+static const char * const genmai_boards_compat_dt[] __initconst = {
+	"renesas,genmai",
+	NULL,
+};
+
+DT_MACHINE_START(GENMAI_DT, "genmai")
+	.init_early	= r7s72100_init_early,
+	.init_machine	= genmai_add_standard_devices,
+	.dt_compat	= genmai_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c
new file mode 100644
index 0000000..ace1711
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-koelsch.c
@@ -0,0 +1,47 @@
+/*
+ * Koelsch board support
+ *
+ * Copyright (C) 2013  Renesas Electronics Corporation
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <mach/common.h>
+#include <mach/r8a7791.h>
+#include <mach/rcar-gen2.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static void __init koelsch_add_standard_devices(void)
+{
+	r8a7791_clock_init();
+	r8a7791_add_standard_devices();
+}
+
+static const char * const koelsch_boards_compat_dt[] __initconst = {
+	"renesas,koelsch",
+	NULL,
+};
+
+DT_MACHINE_START(KOELSCH_DT, "koelsch")
+	.smp		= smp_ops(r8a7791_smp_ops),
+	.init_early	= r8a7791_init_early,
+	.init_machine	= koelsch_add_standard_devices,
+	.init_time	= rcar_gen2_timer_init,
+	.dt_compat	= koelsch_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
deleted file mode 100644
index ef5ca0e..0000000
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ /dev/null
@@ -1,553 +0,0 @@
-/*
- * kota2 board support
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Magnus Damm
- * Copyright (C) 2010  Takashi Yoshii <yoshii.takashi.zj@renesas.com>
- * Copyright (C) 2009  Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/leds-renesas-tpu.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/sh73a0.h>
-#include <mach/common.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/traps.h>
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-/* SMSC 9220 */
-static struct resource smsc9220_resources[] = {
-	[0] = {
-		.start		= 0x14000000, /* CS5A */
-		.end		= 0x140000ff, /* A1->A7 */
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= SH73A0_PINT0_IRQ(2), /* PINTA2 */
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct smsc911x_platform_config smsc9220_platdata = {
-	.flags		= SMSC911X_USE_32BIT, /* 32-bit SW on 16-bit HW bus */
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device eth_device = {
-	.name		= "smsc911x",
-	.id		= 0,
-	.dev  = {
-		.platform_data = &smsc9220_platdata,
-	},
-	.resource	= smsc9220_resources,
-	.num_resources	= ARRAY_SIZE(smsc9220_resources),
-};
-
-/* KEYSC */
-static struct sh_keysc_info keysc_platdata = {
-	.mode		= SH_KEYSC_MODE_6,
-	.scan_timing	= 3,
-	.delay		= 100,
-	.keycodes	= {
-		KEY_NUMERIC_STAR, KEY_NUMERIC_0, KEY_NUMERIC_POUND,
-		0, 0, 0, 0, 0,
-		KEY_NUMERIC_7, KEY_NUMERIC_8, KEY_NUMERIC_9,
-		0, KEY_DOWN, 0, 0, 0,
-		KEY_NUMERIC_4, KEY_NUMERIC_5, KEY_NUMERIC_6,
-		KEY_LEFT, KEY_ENTER, KEY_RIGHT, 0, 0,
-		KEY_NUMERIC_1, KEY_NUMERIC_2, KEY_NUMERIC_3,
-		0, KEY_UP, 0, 0, 0,
-		0, 0, 0, 0, 0, 0, 0, 0,
-		0, 0, 0, 0, 0, 0, 0, 0,
-		0, 0, 0, 0, 0, 0, 0, 0,
-		0, 0, 0, 0, 0, 0, 0, 0,
-	},
-};
-
-static struct resource keysc_resources[] = {
-	[0] = {
-		.name	= "KEYSC",
-		.start	= 0xe61b0000,
-		.end	= 0xe61b0098 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(71),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device keysc_device = {
-	.name		= "sh_keysc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(keysc_resources),
-	.resource	= keysc_resources,
-	.dev		= {
-		.platform_data	= &keysc_platdata,
-	},
-};
-
-/* GPIO KEY */
-#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
-
-static struct gpio_keys_button gpio_buttons[] = {
-	GPIO_KEY(KEY_VOLUMEUP, 56, "+"), /* S2: VOL+ [IRQ9] */
-	GPIO_KEY(KEY_VOLUMEDOWN, 54, "-"), /* S3: VOL- [IRQ10] */
-	GPIO_KEY(KEY_MENU, 27, "Menu"), /* S4: MENU [IRQ30] */
-	GPIO_KEY(KEY_HOMEPAGE, 26, "Home"), /* S5: HOME [IRQ31] */
-	GPIO_KEY(KEY_BACK, 11, "Back"), /* S6: BACK [IRQ0] */
-	GPIO_KEY(KEY_PHONE, 238, "Tel"), /* S7: TEL [IRQ11] */
-	GPIO_KEY(KEY_POWER, 239, "C1"), /* S8: CAM [IRQ13] */
-	GPIO_KEY(KEY_MAIL, 224, "Mail"), /* S9: MAIL [IRQ3] */
-	/* Omitted button "C3?": 223 - S10: CUST [IRQ8] */
-	GPIO_KEY(KEY_CAMERA, 164, "C2"), /* S11: CAM_HALF [IRQ25] */
-	/* Omitted button "?": 152 - S12: CAM_FULL [No IRQ] */
-};
-
-static struct gpio_keys_platform_data gpio_key_info = {
-	.buttons        = gpio_buttons,
-	.nbuttons       = ARRAY_SIZE(gpio_buttons),
-};
-
-static struct platform_device gpio_keys_device = {
-	.name   = "gpio-keys",
-	.id     = -1,
-	.dev    = {
-		.platform_data  = &gpio_key_info,
-	},
-};
-
-/* GPIO LED */
-#define GPIO_LED(n, g) { .name = n, .gpio = g }
-
-static struct gpio_led gpio_leds[] = {
-	GPIO_LED("G", 20), /* PORT20 [GPO0] -> LED7 -> "G" */
-	GPIO_LED("H", 21), /* PORT21 [GPO1] -> LED8 -> "H" */
-	GPIO_LED("J", 22), /* PORT22 [GPO2] -> LED9 -> "J" */
-};
-
-static struct gpio_led_platform_data gpio_leds_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device gpio_leds_device = {
-	.name   = "leds-gpio",
-	.id     = -1,
-	.dev    = {
-		.platform_data  = &gpio_leds_info,
-	},
-};
-
-/* TPU LED */
-static struct led_renesas_tpu_config led_renesas_tpu12_pdata = {
-	.name		= "V2513",
-	.pin_gpio_fn	= GPIO_FN_TPU1TO2,
-	.pin_gpio	= 153,
-	.channel_offset = 0x90,
-	.timer_bit = 2,
-	.max_brightness = 1000,
-};
-
-static struct resource tpu12_resources[] = {
-	[0] = {
-		.name	= "TPU12",
-		.start	= 0xe6610090,
-		.end	= 0xe66100b5,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device leds_tpu12_device = {
-	.name = "leds-renesas-tpu",
-	.id = 12,
-	.dev = {
-		.platform_data  = &led_renesas_tpu12_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(tpu12_resources),
-	.resource	= tpu12_resources,
-};
-
-static struct led_renesas_tpu_config led_renesas_tpu41_pdata = {
-	.name		= "V2514",
-	.pin_gpio_fn	= GPIO_FN_TPU4TO1,
-	.pin_gpio	= 199,
-	.channel_offset = 0x50,
-	.timer_bit = 1,
-	.max_brightness = 1000,
-};
-
-static struct resource tpu41_resources[] = {
-	[0] = {
-		.name	= "TPU41",
-		.start	= 0xe6640050,
-		.end	= 0xe6640075,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device leds_tpu41_device = {
-	.name = "leds-renesas-tpu",
-	.id = 41,
-	.dev = {
-		.platform_data  = &led_renesas_tpu41_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(tpu41_resources),
-	.resource	= tpu41_resources,
-};
-
-static struct led_renesas_tpu_config led_renesas_tpu21_pdata = {
-	.name		= "V2515",
-	.pin_gpio_fn	= GPIO_FN_TPU2TO1,
-	.pin_gpio	= 197,
-	.channel_offset = 0x50,
-	.timer_bit = 1,
-	.max_brightness = 1000,
-};
-
-static struct resource tpu21_resources[] = {
-	[0] = {
-		.name	= "TPU21",
-		.start	= 0xe6620050,
-		.end	= 0xe6620075,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device leds_tpu21_device = {
-	.name = "leds-renesas-tpu",
-	.id = 21,
-	.dev = {
-		.platform_data  = &led_renesas_tpu21_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(tpu21_resources),
-	.resource	= tpu21_resources,
-};
-
-static struct led_renesas_tpu_config led_renesas_tpu30_pdata = {
-	.name		= "KEYLED",
-	.pin_gpio_fn	= GPIO_FN_TPU3TO0,
-	.pin_gpio	= 163,
-	.channel_offset = 0x10,
-	.timer_bit = 0,
-	.max_brightness = 1000,
-};
-
-static struct resource tpu30_resources[] = {
-	[0] = {
-		.name	= "TPU30",
-		.start	= 0xe6630010,
-		.end	= 0xe6630035,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device leds_tpu30_device = {
-	.name = "leds-renesas-tpu",
-	.id = 30,
-	.dev = {
-		.platform_data  = &led_renesas_tpu30_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(tpu30_resources),
-	.resource	= tpu30_resources,
-};
-
-/* Fixed 1.8V regulator to be used by MMCIF */
-static struct regulator_consumer_supply fixed1v8_power_consumers[] =
-{
-	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
-};
-
-/* MMCIF */
-static struct resource mmcif_resources[] = {
-	[0] = {
-		.name   = "MMCIF",
-		.start  = 0xe6bd0000,
-		.end    = 0xe6bd00ff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = gic_spi(140),
-		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start  = gic_spi(141),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct sh_mmcif_plat_data mmcif_info = {
-	.ocr            = MMC_VDD_165_195,
-	.caps           = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
-};
-
-static struct platform_device mmcif_device = {
-	.name           = "sh_mmcif",
-	.id             = 0,
-	.dev            = {
-		.platform_data          = &mmcif_info,
-	},
-	.num_resources  = ARRAY_SIZE(mmcif_resources),
-	.resource       = mmcif_resources,
-};
-
-/* Fixed 3.3V regulator to be used by SDHI0 and SDHI1 */
-static struct regulator_consumer_supply fixed3v3_power_consumers[] =
-{
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
-};
-
-/* SDHI0 */
-static struct sh_mobile_sdhi_info sdhi0_info = {
-	.tmio_caps      = MMC_CAP_SD_HIGHSPEED,
-	.tmio_flags     = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
-};
-
-static struct resource sdhi0_resources[] = {
-	[0] = {
-		.name   = "SDHI0",
-		.start  = 0xee100000,
-		.end    = 0xee1000ff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = gic_spi(83),
-		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start  = gic_spi(84),
-		.flags  = IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= gic_spi(85),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi0_device = {
-	.name           = "sh_mobile_sdhi",
-	.id             = 0,
-	.num_resources  = ARRAY_SIZE(sdhi0_resources),
-	.resource       = sdhi0_resources,
-	.dev    = {
-		.platform_data  = &sdhi0_info,
-	},
-};
-
-/* SDHI1 */
-static struct sh_mobile_sdhi_info sdhi1_info = {
-	.tmio_caps      = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
-	.tmio_flags     = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
-};
-
-static struct resource sdhi1_resources[] = {
-	[0] = {
-		.name   = "SDHI1",
-		.start  = 0xee120000,
-		.end    = 0xee1200ff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = gic_spi(87),
-		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start  = gic_spi(88),
-		.flags  = IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= gic_spi(89),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi1_device = {
-	.name           = "sh_mobile_sdhi",
-	.id             = 1,
-	.num_resources  = ARRAY_SIZE(sdhi1_resources),
-	.resource       = sdhi1_resources,
-	.dev    = {
-		.platform_data  = &sdhi1_info,
-	},
-};
-
-static struct platform_device *kota2_devices[] __initdata = {
-	&eth_device,
-	&keysc_device,
-	&gpio_keys_device,
-	&gpio_leds_device,
-	&leds_tpu12_device,
-	&leds_tpu41_device,
-	&leds_tpu21_device,
-	&leds_tpu30_device,
-	&mmcif_device,
-	&sdhi0_device,
-	&sdhi1_device,
-};
-
-static unsigned long pin_pullup_conf[] = {
-	PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
-};
-
-static const struct pinctrl_map kota2_pinctrl_map[] = {
-	/* KEYSC */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_in8", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out04", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out5", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out6_0", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out7_0", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out8_0", "keysc"),
-	PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				      "keysc_in8", pin_pullup_conf),
-	/* MMCIF */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				  "mmc0_data8_0", "mmc0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				  "mmc0_ctrl_0", "mmc0"),
-	PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				    "PORT279", pin_pullup_conf),
-	PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				      "mmc0_data8_0", pin_pullup_conf),
-	/* SCIFA2 (UART2) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0",
-				  "scifa2_data_0", "scifa2"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0",
-				  "scifa2_ctrl_0", "scifa2"),
-	/* SCIFA4 (UART1) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
-				  "scifa4_data", "scifa4"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
-				  "scifa4_ctrl", "scifa4"),
-	/* SCIFB (BT) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.8", "pfc-sh73a0",
-				  "scifb_data_0", "scifb"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.8", "pfc-sh73a0",
-				  "scifb_clk_0", "scifb"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.8", "pfc-sh73a0",
-				  "scifb_ctrl_0", "scifb"),
-	/* SDHI0 (microSD) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_data4", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_ctrl", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_cd", "sdhi0"),
-	PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				      "sdhi0_data4", pin_pullup_conf),
-	PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				    "PORT256", pin_pullup_conf),
-	PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				    "PORT251", pin_pullup_conf),
-	/* SDHI1 (BCM4330) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
-				  "sdhi1_data4", "sdhi1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
-				  "sdhi1_ctrl", "sdhi1"),
-	PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
-				      "sdhi1_data4", pin_pullup_conf),
-	PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
-				    "PORT263", pin_pullup_conf),
-	/* SMSC911X */
-	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x.0", "pfc-sh73a0",
-				  "bsc_data_0_7", "bsc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x.0", "pfc-sh73a0",
-				  "bsc_data_8_15", "bsc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x.0", "pfc-sh73a0",
-				  "bsc_cs5_a", "bsc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x.0", "pfc-sh73a0",
-				  "bsc_we0", "bsc"),
-};
-
-static void __init kota2_init(void)
-{
-	regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
-				     ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
-	regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
-				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-	regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
-	pinctrl_register_mappings(kota2_pinctrl_map,
-				  ARRAY_SIZE(kota2_pinctrl_map));
-	sh73a0_pinmux_init();
-
-	/* SMSC911X */
-	gpio_request_one(144, GPIOF_IN, NULL); /* PINTA2 */
-	gpio_request_one(145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
-
-	/* MMCIF */
-	gpio_request_one(208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
-
-#ifdef CONFIG_CACHE_L2X0
-	/* Early BRESP enable, Shared attribute override enable, 64K*8way */
-	l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff);
-#endif
-	sh73a0_add_standard_devices();
-	platform_add_devices(kota2_devices, ARRAY_SIZE(kota2_devices));
-}
-
-MACHINE_START(KOTA2, "kota2")
-	.smp		= smp_ops(sh73a0_smp_ops),
-	.map_io		= sh73a0_map_io,
-	.init_early	= sh73a0_add_early_devices,
-	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= sh73a0_init_irq,
-	.init_machine	= kota2_init,
-	.init_late	= shmobile_init_late,
-	.init_time	= sh73a0_earlytimer_init,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9d-reference.c b/arch/arm/mach-shmobile/board-kzm9d-reference.c
new file mode 100644
index 0000000..054d8d5
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-kzm9d-reference.c
@@ -0,0 +1,48 @@
+/*
+ * kzm9d board support - Reference DT implementation
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <mach/emev2.h>
+#include <mach/common.h>
+#include <asm/mach/arch.h>
+
+static void __init kzm9d_add_standard_devices(void)
+{
+	if (!IS_ENABLED(CONFIG_COMMON_CLK))
+		emev2_clock_init();
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *kzm9d_boards_compat_dt[] __initdata = {
+	"renesas,kzm9d",
+	"renesas,kzm9d-reference",
+	NULL,
+};
+
+DT_MACHINE_START(KZM9D_DT, "kzm9d")
+	.smp		= smp_ops(emev2_smp_ops),
+	.map_io		= emev2_map_io,
+	.init_early	= emev2_init_delay,
+	.init_machine	= kzm9d_add_standard_devices,
+	.init_late	= shmobile_init_late,
+	.dt_compat	= kzm9d_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c
index 4368000..30c2cc6 100644
--- a/arch/arm/mach-shmobile/board-kzm9d.c
+++ b/arch/arm/mach-shmobile/board-kzm9d.c
@@ -85,9 +85,7 @@ static const char *kzm9d_boards_compat_dt[] __initdata = {
 DT_MACHINE_START(KZM9D_DT, "kzm9d")
 	.smp		= smp_ops(emev2_smp_ops),
 	.map_io		= emev2_map_io,
-	.init_early	= emev2_add_early_devices,
-	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= emev2_init_irq,
+	.init_early	= emev2_init_delay,
 	.init_machine	= kzm9d_add_standard_devices,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= kzm9d_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c
index 44055fe..598e324 100644
--- a/arch/arm/mach-shmobile/board-kzm9g-reference.c
+++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c
@@ -21,67 +21,19 @@
  */
 
 #include <linux/delay.h>
-#include <linux/gpio.h>
 #include <linux/io.h>
 #include <linux/irq.h>
-#include <linux/irqchip.h>
 #include <linux/input.h>
 #include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf-generic.h>
 #include <mach/sh73a0.h>
 #include <mach/common.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-static unsigned long pin_pullup_conf[] = {
-	PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
-};
-
-static const struct pinctrl_map kzm_pinctrl_map[] = {
-	PIN_MAP_MUX_GROUP_DEFAULT("e6826000.i2c", "pfc-sh73a0",
-				  "i2c3_1", "i2c3"),
-	/* MMCIF */
-	PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
-				  "mmc0_data8_0", "mmc0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
-				  "mmc0_ctrl_0", "mmc0"),
-	PIN_MAP_CONFIGS_PIN_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
-				    "PORT279", pin_pullup_conf),
-	PIN_MAP_CONFIGS_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
-				      "mmc0_data8_0", pin_pullup_conf),
-	/* SCIFA4 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
-				  "scifa4_data", "scifa4"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
-				  "scifa4_ctrl", "scifa4"),
-	/* SDHI0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
-				  "sdhi0_data4", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
-				  "sdhi0_ctrl", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
-				  "sdhi0_cd", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
-				  "sdhi0_wp", "sdhi0"),
-	/* SDHI2 */
-	PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "pfc-sh73a0",
-				  "sdhi2_data4", "sdhi2"),
-	PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "pfc-sh73a0",
-				  "sdhi2_ctrl", "sdhi2"),
-};
-
 static void __init kzm_init(void)
 {
 	sh73a0_add_standard_devices_dt();
-	pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map));
-	sh73a0_pinmux_init();
-
-	/* enable SD */
-	gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */
-
-	gpio_request_one(14, GPIOF_OUT_INIT_HIGH, NULL); /* power */
 
 #ifdef CONFIG_CACHE_L2X0
 	/* Early BRESP enable, Shared attribute override enable, 64K*8way */
@@ -99,8 +51,6 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g-reference")
 	.map_io		= sh73a0_map_io,
 	.init_early	= sh73a0_init_delay,
 	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= irqchip_init,
 	.init_machine	= kzm_init,
-	.init_time	= shmobile_timer_init,
 	.dt_compat	= kzm9g_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 1068120..fe689b7 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -54,14 +54,14 @@
 /*
  * external GPIO
  */
-#define GPIO_PCF8575_BASE	(GPIO_NR)
-#define GPIO_PCF8575_PORT10	(GPIO_NR + 8)
-#define GPIO_PCF8575_PORT11	(GPIO_NR + 9)
-#define GPIO_PCF8575_PORT12	(GPIO_NR + 10)
-#define GPIO_PCF8575_PORT13	(GPIO_NR + 11)
-#define GPIO_PCF8575_PORT14	(GPIO_NR + 12)
-#define GPIO_PCF8575_PORT15	(GPIO_NR + 13)
-#define GPIO_PCF8575_PORT16	(GPIO_NR + 14)
+#define GPIO_PCF8575_BASE	(310)
+#define GPIO_PCF8575_PORT10	(GPIO_PCF8575_BASE + 8)
+#define GPIO_PCF8575_PORT11	(GPIO_PCF8575_BASE + 9)
+#define GPIO_PCF8575_PORT12	(GPIO_PCF8575_BASE + 10)
+#define GPIO_PCF8575_PORT13	(GPIO_PCF8575_BASE + 11)
+#define GPIO_PCF8575_PORT14	(GPIO_PCF8575_BASE + 12)
+#define GPIO_PCF8575_PORT15	(GPIO_PCF8575_BASE + 13)
+#define GPIO_PCF8575_PORT16	(GPIO_PCF8575_BASE + 14)
 
 /* Dummy supplies, where voltage doesn't matter */
 static struct regulator_consumer_supply dummy_supplies[] = {
@@ -366,6 +366,7 @@ static struct resource sh_mmcif_resources[] = {
 static struct sh_mmcif_plat_data sh_mmcif_platdata = {
 	.ocr		= MMC_VDD_165_195,
 	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
+	.ccs_unsupported = true,
 	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
 	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c
new file mode 100644
index 0000000..1a1a4a8
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-lager-reference.c
@@ -0,0 +1,46 @@
+/*
+ * Lager board support - Reference DT implementation
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Simon Horman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <mach/r8a7790.h>
+#include <asm/mach/arch.h>
+
+static void __init lager_add_standard_devices(void)
+{
+	/* clocks are setup late during boot in the case of DT */
+	r8a7790_clock_init();
+
+	r8a7790_add_dt_devices();
+        of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *lager_boards_compat_dt[] __initdata = {
+	"renesas,lager-reference",
+	NULL,
+};
+
+DT_MACHINE_START(LAGER_DT, "lager")
+	.smp		= smp_ops(r8a7790_smp_ops),
+	.init_early	= r8a7790_init_early,
+	.init_time	= rcar_gen2_timer_init,
+	.init_machine	= lager_add_standard_devices,
+	.dt_compat	= lager_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index 8d6bd5c..a8d3ce6 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -22,17 +22,80 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
-#include <linux/irqchip.h>
 #include <linux/kernel.h>
 #include <linux/leds.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/gpio-rcar.h>
+#include <linux/platform_data/rcar-du.h>
 #include <linux/platform_device.h>
+#include <linux/phy.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/sh_eth.h>
 #include <mach/common.h>
+#include <mach/irqs.h>
 #include <mach/r8a7790.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+/* DU */
+static struct rcar_du_encoder_data lager_du_encoders[] = {
+	{
+		.type = RCAR_DU_ENCODER_VGA,
+		.output = RCAR_DU_OUTPUT_DPAD0,
+	}, {
+		.type = RCAR_DU_ENCODER_NONE,
+		.output = RCAR_DU_OUTPUT_LVDS1,
+		.connector.lvds.panel = {
+			.width_mm = 210,
+			.height_mm = 158,
+			.mode = {
+				.clock = 65000,
+				.hdisplay = 1024,
+				.hsync_start = 1048,
+				.hsync_end = 1184,
+				.htotal = 1344,
+				.vdisplay = 768,
+				.vsync_start = 771,
+				.vsync_end = 777,
+				.vtotal = 806,
+				.flags = 0,
+			},
+		},
+	},
+};
+
+static const struct rcar_du_platform_data lager_du_pdata __initconst = {
+	.encoders = lager_du_encoders,
+	.num_encoders = ARRAY_SIZE(lager_du_encoders),
+};
+
+static const struct resource du_resources[] __initconst = {
+	DEFINE_RES_MEM(0xfeb00000, 0x70000),
+	DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
+	DEFINE_RES_MEM_NAMED(0xfeb94000, 0x1c, "lvds.1"),
+	DEFINE_RES_IRQ(gic_spi(256)),
+	DEFINE_RES_IRQ(gic_spi(268)),
+	DEFINE_RES_IRQ(gic_spi(269)),
+};
+
+static void __init lager_add_du_device(void)
+{
+	struct platform_device_info info = {
+		.name = "rcar-du-r8a7790",
+		.id = -1,
+		.res = du_resources,
+		.num_res = ARRAY_SIZE(du_resources),
+		.data = &lager_du_pdata,
+		.size_data = sizeof(lager_du_pdata),
+		.dma_mask = DMA_BIT_MASK(32),
+	};
+
+	platform_device_register_full(&info);
+}
+
 /* LEDS */
 static struct gpio_led lager_leds[] = {
 	{
@@ -50,7 +113,7 @@ static struct gpio_led lager_leds[] = {
 	},
 };
 
-static __initdata struct gpio_led_platform_data lager_leds_pdata = {
+static const struct gpio_led_platform_data lager_leds_pdata __initconst = {
 	.leds		= lager_leds,
 	.num_leds	= ARRAY_SIZE(lager_leds),
 };
@@ -66,18 +129,70 @@ static struct gpio_keys_button gpio_buttons[] = {
 	GPIO_KEY(KEY_1,		RCAR_GP_PIN(1, 14),	"SW2-pin1"),
 };
 
-static __initdata struct gpio_keys_platform_data lager_keys_pdata = {
+static const struct gpio_keys_platform_data lager_keys_pdata __initconst = {
 	.buttons	= gpio_buttons,
 	.nbuttons	= ARRAY_SIZE(gpio_buttons),
 };
 
+/* Fixed 3.3V regulator to be used by MMCIF */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mmcif.1"),
+};
+
+/* MMCIF */
+static const struct sh_mmcif_plat_data mmcif1_pdata __initconst = {
+	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
+	.clk_ctrl2_present = true,
+	.ccs_unsupported = true,
+};
+
+static const struct resource mmcif1_resources[] __initconst = {
+	DEFINE_RES_MEM_NAMED(0xee220000, 0x80, "MMCIF1"),
+	DEFINE_RES_IRQ(gic_spi(170)),
+};
+
+/* Ether */
+static const struct sh_eth_plat_data ether_pdata __initconst = {
+	.phy			= 0x1,
+	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
+	.phy_interface		= PHY_INTERFACE_MODE_RMII,
+	.ether_link_active_low	= 1,
+};
+
+static const struct resource ether_resources[] __initconst = {
+	DEFINE_RES_MEM(0xee700000, 0x400),
+	DEFINE_RES_IRQ(gic_spi(162)),
+};
+
 static const struct pinctrl_map lager_pinctrl_map[] = {
+	/* DU (CN10: ARGB0, CN13: LVDS) */
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
+				  "du_rgb666", "du"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
+				  "du_sync_1", "du"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
+				  "du_clk_out_0", "du"),
 	/* SCIF0 (CN19: DEBUG SERIAL0) */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790",
 				  "scif0_data", "scif0"),
 	/* SCIF1 (CN20: DEBUG SERIAL1) */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7790",
 				  "scif1_data", "scif1"),
+	/* MMCIF1 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790",
+				  "mmc1_data8", "mmc1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790",
+				  "mmc1_ctrl", "mmc1"),
+	/* Ether */
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
+				  "eth_link", "eth"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
+				  "eth_mdio", "eth"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
+				  "eth_rmii", "eth"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
+				  "intc_irq0", "intc"),
 };
 
 static void __init lager_add_standard_devices(void)
@@ -95,16 +210,53 @@ static void __init lager_add_standard_devices(void)
 	platform_device_register_data(&platform_bus, "gpio-keys", -1,
 				      &lager_keys_pdata,
 				      sizeof(lager_keys_pdata));
+	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+	platform_device_register_resndata(&platform_bus, "sh_mmcif", 1,
+					  mmcif1_resources, ARRAY_SIZE(mmcif1_resources),
+					  &mmcif1_pdata, sizeof(mmcif1_pdata));
+
+	platform_device_register_resndata(&platform_bus, "r8a7790-ether", -1,
+					  ether_resources,
+					  ARRAY_SIZE(ether_resources),
+					  &ether_pdata, sizeof(ether_pdata));
+
+	lager_add_du_device();
+}
+
+/*
+ * Ether LEDs on the Lager board are named LINK and ACTIVE which corresponds
+ * to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits
+ * 14-15. We have to set them back to 01 from the default 00 value each time
+ * the PHY is reset. It's also important because the PHY's LED0 signal is
+ * connected to SoC's ETH_LINK signal and in the PHY's default mode it will
+ * bounce on and off after each packet, which we apparently want to avoid.
+ */
+static int lager_ksz8041_fixup(struct phy_device *phydev)
+{
+	u16 phyctrl1 = phy_read(phydev, 0x1e);
+
+	phyctrl1 &= ~0xc000;
+	phyctrl1 |= 0x4000;
+	return phy_write(phydev, 0x1e, phyctrl1);
+}
+
+static void __init lager_init(void)
+{
+	lager_add_standard_devices();
+
+	phy_register_fixup_for_id("r8a7790-ether-ff:01", lager_ksz8041_fixup);
 }
 
-static const char *lager_boards_compat_dt[] __initdata = {
+static const char * const lager_boards_compat_dt[] __initconst = {
 	"renesas,lager",
 	NULL,
 };
 
 DT_MACHINE_START(LAGER_DT, "lager")
-	.init_irq	= irqchip_init,
-	.init_time	= r8a7790_timer_init,
-	.init_machine	= lager_add_standard_devices,
+	.smp		= smp_ops(r8a7790_smp_ops),
+	.init_early	= r8a7790_init_early,
+	.init_time	= rcar_gen2_timer_init,
+	.init_machine	= lager_init,
 	.dt_compat	= lager_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 85f51a8..af06753 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -41,6 +41,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/sh_flctl.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/platform_data/gpio_backlight.h>
 #include <linux/pm_clock.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
@@ -49,7 +50,6 @@
 #include <linux/tca6416_keypad.h>
 #include <linux/usb/renesas_usbhs.h>
 #include <linux/dma-mapping.h>
-
 #include <video/sh_mobile_hdmi.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
@@ -346,7 +346,7 @@ static struct platform_device meram_device = {
 	},
 };
 
-/* LCDC */
+/* LCDC and backlight */
 static struct fb_videomode mackerel_lcdc_modes[] = {
 	{
 		.name		= "WVGA Panel",
@@ -362,13 +362,6 @@ static struct fb_videomode mackerel_lcdc_modes[] = {
 	},
 };
 
-static int mackerel_set_brightness(int brightness)
-{
-	gpio_set_value(31, brightness);
-
-	return 0;
-}
-
 static const struct sh_mobile_meram_cfg lcd_meram_cfg = {
 	.icb[0] = {
 		.meram_size     = 0x40,
@@ -393,11 +386,6 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 			.width		= 152,
 			.height		= 91,
 		},
-		.bl_info = {
-			.name = "sh_mobile_lcdc_bl",
-			.max_brightness = 1,
-			.set_brightness = mackerel_set_brightness,
-		},
 		.meram_cfg = &lcd_meram_cfg,
 	}
 };
@@ -425,6 +413,20 @@ static struct platform_device lcdc_device = {
 	},
 };
 
+static struct gpio_backlight_platform_data gpio_backlight_data = {
+	.fbdev = &lcdc_device.dev,
+	.gpio = 31,
+	.def_value = 1,
+	.name = "backlight",
+};
+
+static struct platform_device gpio_backlight_device = {
+	.name = "gpio-backlight",
+	.dev = {
+		.platform_data = &gpio_backlight_data,
+	},
+};
+
 /* HDMI */
 static struct sh_mobile_hdmi_info hdmi_info = {
 	.flags		= HDMI_SND_SRC_SPDIF,
@@ -1231,6 +1233,7 @@ static struct platform_device *mackerel_devices[] __initdata = {
 	&nor_flash_device,
 	&smc911x_device,
 	&lcdc_device,
+	&gpio_backlight_device,
 	&usbhs0_device,
 	&usbhs1_device,
 	&leds_device,
@@ -1441,9 +1444,6 @@ static void __init mackerel_init(void)
 				  ARRAY_SIZE(mackerel_pinctrl_map));
 	sh7372_pinmux_init();
 
-	/* backlight, off by default */
-	gpio_request_one(31, GPIOF_OUT_INIT_LOW, NULL);
-
 	gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
 
 	/* USBHS0 */
diff --git a/arch/arm/mach-shmobile/board-marzen-reference.c b/arch/arm/mach-shmobile/board-marzen-reference.c
index 480d882..2773936 100644
--- a/arch/arm/mach-shmobile/board-marzen-reference.c
+++ b/arch/arm/mach-shmobile/board-marzen-reference.c
@@ -19,43 +19,16 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#include <linux/pinctrl/machine.h>
 #include <mach/r8a7779.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 
-static const struct pinctrl_map marzen_pinctrl_map[] = {
-	/* SCIF2 (CN18: DEBUG0) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-r8a7779",
-				  "scif2_data_c", "scif2"),
-	/* SCIF4 (CN19: DEBUG1) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-r8a7779",
-				  "scif4_data", "scif4"),
-	/* SDHI0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
-				  "sdhi0_data4", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
-				  "sdhi0_ctrl", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
-				  "sdhi0_cd", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
-				  "sdhi0_wp", "sdhi0"),
-	/* SMSC */
-	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
-				  "intc_irq1_b", "intc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
-				  "lbsc_ex_cs0", "lbsc"),
-};
-
 static void __init marzen_init(void)
 {
-	pinctrl_register_mappings(marzen_pinctrl_map,
-				  ARRAY_SIZE(marzen_pinctrl_map));
-	r8a7779_pinmux_init();
-
 	r8a7779_add_standard_devices_dt();
+	r8a7779_init_irq_extpin_dt(1); /* IRQ1 as individual interrupt */
 }
 
 static const char *marzen_boards_compat_dt[] __initdata = {
@@ -70,6 +43,5 @@ DT_MACHINE_START(MARZEN, "marzen")
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= r8a7779_init_irq_dt,
 	.init_machine	= marzen_init,
-	.init_time	= shmobile_timer_init,
 	.dt_compat	= marzen_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index a7d1010..da1352f 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -1,8 +1,9 @@
 /*
  * marzen board support
  *
- * Copyright (C) 2011  Renesas Solutions Corp.
+ * Copyright (C) 2011, 2013  Renesas Solutions Corp.
  * Copyright (C) 2011  Magnus Damm
+ * Copyright (C) 2013  Cogent Embedded, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -29,6 +30,8 @@
 #include <linux/dma-mapping.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/gpio-rcar.h>
+#include <linux/platform_data/rcar-du.h>
+#include <linux/platform_data/usb-rcar-phy.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/smsc911x.h>
@@ -37,7 +40,7 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
-#include <mach/hardware.h>
+#include <media/soc_camera.h>
 #include <mach/r8a7779.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
@@ -57,7 +60,26 @@ static struct regulator_consumer_supply dummy_supplies[] = {
 	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
 };
 
-static struct rcar_phy_platform_data usb_phy_platform_data __initdata;
+/* USB PHY */
+static struct resource usb_phy_resources[] = {
+	[0] = {
+		.start		= 0xffe70800,
+		.end		= 0xffe70900 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct rcar_phy_platform_data usb_phy_platform_data;
+
+static struct platform_device usb_phy = {
+	.name		= "rcar_usb_phy",
+	.id		= -1,
+	.dev  = {
+		.platform_data = &usb_phy_platform_data,
+	},
+	.resource	= usb_phy_resources,
+	.num_resources	= ARRAY_SIZE(usb_phy_resources),
+};
 
 /* SMSC LAN89218 */
 static struct resource smsc911x_resources[] = {
@@ -103,6 +125,8 @@ static struct resource sdhi0_resources[] = {
 };
 
 static struct sh_mobile_sdhi_info sdhi0_platform_data = {
+	.dma_slave_tx = HPBDMA_SLAVE_SDHI0_TX,
+	.dma_slave_rx = HPBDMA_SLAVE_SDHI0_RX,
 	.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
 	.tmio_caps = MMC_CAP_SD_HIGHSPEED,
 };
@@ -148,6 +172,63 @@ static struct platform_device hspi_device = {
 	.num_resources	= ARRAY_SIZE(hspi_resources),
 };
 
+/*
+ * DU
+ *
+ * The panel only specifies the [hv]display and [hv]total values. The position
+ * and width of the sync pulses don't matter, they're copied from VESA timings.
+ */
+static struct rcar_du_encoder_data du_encoders[] = {
+	{
+		.type = RCAR_DU_ENCODER_VGA,
+		.output = RCAR_DU_OUTPUT_DPAD0,
+	}, {
+		.type = RCAR_DU_ENCODER_LVDS,
+		.output = RCAR_DU_OUTPUT_DPAD1,
+		.connector.lvds.panel = {
+			.width_mm = 210,
+			.height_mm = 158,
+			.mode = {
+				.clock = 65000,
+				.hdisplay = 1024,
+				.hsync_start = 1048,
+				.hsync_end = 1184,
+				.htotal = 1344,
+				.vdisplay = 768,
+				.vsync_start = 771,
+				.vsync_end = 777,
+				.vtotal = 806,
+				.flags = 0,
+			},
+		},
+	},
+};
+
+static const struct rcar_du_platform_data du_pdata __initconst = {
+	.encoders = du_encoders,
+	.num_encoders = ARRAY_SIZE(du_encoders),
+};
+
+static const struct resource du_resources[] __initconst = {
+	DEFINE_RES_MEM(0xfff80000, 0x40000),
+	DEFINE_RES_IRQ(gic_iid(0x3f)),
+};
+
+static void __init marzen_add_du_device(void)
+{
+	struct platform_device_info info = {
+		.name = "rcar-du-r8a7779",
+		.id = -1,
+		.res = du_resources,
+		.num_res = ARRAY_SIZE(du_resources),
+		.data = &du_pdata,
+		.size_data = sizeof(du_pdata),
+		.dma_mask = DMA_BIT_MASK(32),
+	};
+
+	platform_device_register_full(&info);
+}
+
 /* LEDS */
 static struct gpio_led marzen_leds[] = {
 	{
@@ -178,15 +259,57 @@ static struct platform_device leds_device = {
 	},
 };
 
+static struct rcar_vin_platform_data vin_platform_data __initdata = {
+	.flags	= RCAR_VIN_BT656,
+};
+
+#define MARZEN_CAMERA(idx)					\
+static struct i2c_board_info camera##idx##_info = {		\
+	I2C_BOARD_INFO("adv7180", 0x20 + (idx)),		\
+};								\
+								\
+static struct soc_camera_link iclink##idx##_adv7180 = {		\
+	.bus_id		= 1 + 2 * (idx),			\
+	.i2c_adapter_id	= 0,					\
+	.board_info	= &camera##idx##_info,			\
+};								\
+								\
+static struct platform_device camera##idx##_device = {		\
+	.name	= "soc-camera-pdrv",				\
+	.id	= idx,						\
+	.dev	= {						\
+		.platform_data	= &iclink##idx##_adv7180,	\
+	},							\
+};
+
+MARZEN_CAMERA(0);
+MARZEN_CAMERA(1);
+
 static struct platform_device *marzen_devices[] __initdata = {
 	&eth_device,
 	&sdhi0_device,
 	&thermal_device,
 	&hspi_device,
 	&leds_device,
+	&usb_phy,
+	&camera0_device,
+	&camera1_device,
 };
 
 static const struct pinctrl_map marzen_pinctrl_map[] = {
+	/* DU (CN10: ARGB0, CN13: LVDS) */
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
+				  "du0_rgb888", "du0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
+				  "du0_sync_1", "du0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
+				  "du0_clk_out_0", "du0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
+				  "du1_rgb666", "du1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
+				  "du1_sync_1", "du1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
+				  "du1_clk_out", "du1"),
 	/* HSPI0 */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7779",
 				  "hspi0", "hspi0"),
@@ -219,6 +342,16 @@ static const struct pinctrl_map marzen_pinctrl_map[] = {
 	/* USB2 */
 	PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.1", "pfc-r8a7779",
 				  "usb2", "usb2"),
+	/* VIN1 */
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7779-vin.1", "pfc-r8a7779",
+				  "vin1_clk", "vin1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7779-vin.1", "pfc-r8a7779",
+				  "vin1_data8", "vin1"),
+	/* VIN3 */
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7779-vin.3", "pfc-r8a7779",
+				  "vin3_clk", "vin3"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7779-vin.3", "pfc-r8a7779",
+				  "vin3_data8", "vin3"),
 };
 
 static void __init marzen_init(void)
@@ -234,17 +367,24 @@ static void __init marzen_init(void)
 	r8a7779_init_irq_extpin(1); /* IRQ1 as individual interrupt */
 
 	r8a7779_add_standard_devices();
-	r8a7779_add_usb_phy_device(&usb_phy_platform_data);
+	r8a7779_add_vin_device(1, &vin_platform_data);
+	r8a7779_add_vin_device(3, &vin_platform_data);
 	platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
+	marzen_add_du_device();
 }
 
-MACHINE_START(MARZEN, "marzen")
+static const char *marzen_boards_compat_dt[] __initdata = {
+        "renesas,marzen",
+        NULL,
+};
+
+DT_MACHINE_START(MARZEN, "marzen")
 	.smp		= smp_ops(r8a7779_smp_ops),
 	.map_io		= r8a7779_map_io,
 	.init_early	= r8a7779_add_early_devices,
-	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= r8a7779_init_irq,
+	.init_irq	= r8a7779_init_irq_dt,
 	.init_machine	= marzen_init,
 	.init_late	= r8a7779_init_late,
+	.dt_compat	= marzen_boards_compat_dt,
 	.init_time	= r8a7779_earlytimer_init,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/clock-emev2.c b/arch/arm/mach-shmobile/clock-emev2.c
index 4710f18..5ac13ba 100644
--- a/arch/arm/mach-shmobile/clock-emev2.c
+++ b/arch/arm/mach-shmobile/clock-emev2.c
@@ -40,7 +40,6 @@
 #define USIB2SCLKDIV 0x65c
 #define USIB3SCLKDIV 0x660
 #define STI_CLKSEL 0x688
-#define SMU_GENERAL_REG0 0x7c0
 
 /* not pretty, but hey */
 static void __iomem *smu_base;
@@ -51,11 +50,6 @@ static void emev2_smu_write(unsigned long value, int offs)
 	iowrite32(value, smu_base + offs);
 }
 
-void emev2_set_boot_vector(unsigned long value)
-{
-	emev2_smu_write(value, SMU_GENERAL_REG0);
-}
-
 static struct clk_mapping smu_mapping = {
 	.phys	= EMEV2_SMU_BASE,
 	.len	= PAGE_SIZE,
@@ -205,23 +199,11 @@ static struct clk_lookup lookups[] = {
 void __init emev2_clock_init(void)
 {
 	int k, ret = 0;
-	static int is_setup;
-
-	/* yuck, this is ugly as hell, but the non-smp case of clocks
-	 * code is now designed to rely on ioremap() instead of static
-	 * entity maps. in the case of smp we need access to the SMU
-	 * register earlier than ioremap() is actually working without
-	 * any static maps. to enable SMP in ugly but with dynamic
-	 * mappings we have to call emev2_clock_init() from different
-	 * places depending on UP and SMP...
-	 */
-	if (is_setup++)
-		return;
 
 	smu_base = ioremap(EMEV2_SMU_BASE, PAGE_SIZE);
 	BUG_ON(!smu_base);
 
-	/* setup STI timer to run on 37.768 kHz and deassert reset */
+	/* setup STI timer to run on 32.768 kHz and deassert reset */
 	emev2_smu_write(0, STI_CLKSEL);
 	emev2_smu_write(1, STI_RSTCTRL);
 
diff --git a/arch/arm/mach-shmobile/clock-r7s72100.c b/arch/arm/mach-shmobile/clock-r7s72100.c
new file mode 100644
index 0000000..4aba20c
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-r7s72100.c
@@ -0,0 +1,202 @@
+/*
+ * r7a72100 clock framework support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2012  Phil Edworthy
+ * Copyright (C) 2011  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/sh_clk.h>
+#include <linux/clkdev.h>
+#include <mach/common.h>
+#include <mach/r7s72100.h>
+
+/* registers */
+#define FRQCR		0xfcfe0010
+#define FRQCR2		0xfcfe0014
+#define STBCR3		0xfcfe0420
+#define STBCR4		0xfcfe0424
+
+#define PLL_RATE 30
+
+static struct clk_mapping cpg_mapping = {
+	.phys	= 0xfcfe0000,
+	.len	= 0x1000,
+};
+
+/* Fixed 32 KHz root clock for RTC */
+static struct clk r_clk = {
+	.rate           = 32768,
+};
+
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+static struct clk extal_clk = {
+	.rate		= 13330000,
+	.mapping	= &cpg_mapping,
+};
+
+static unsigned long pll_recalc(struct clk *clk)
+{
+	return clk->parent->rate * PLL_RATE;
+}
+
+static struct sh_clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
+};
+
+static struct clk pll_clk = {
+	.ops		= &pll_clk_ops,
+	.parent		= &extal_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long bus_recalc(struct clk *clk)
+{
+	return clk->parent->rate * 2 / 3;
+}
+
+static struct sh_clk_ops bus_clk_ops = {
+	.recalc		= bus_recalc,
+};
+
+static struct clk bus_clk = {
+	.ops		= &bus_clk_ops,
+	.parent		= &pll_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long peripheral0_recalc(struct clk *clk)
+{
+	return clk->parent->rate / 12;
+}
+
+static struct sh_clk_ops peripheral0_clk_ops = {
+	.recalc		= peripheral0_recalc,
+};
+
+static struct clk peripheral0_clk = {
+	.ops		= &peripheral0_clk_ops,
+	.parent		= &pll_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long peripheral1_recalc(struct clk *clk)
+{
+	return clk->parent->rate / 6;
+}
+
+static struct sh_clk_ops peripheral1_clk_ops = {
+	.recalc		= peripheral1_recalc,
+};
+
+static struct clk peripheral1_clk = {
+	.ops		= &peripheral1_clk_ops,
+	.parent		= &pll_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+struct clk *main_clks[] = {
+	&r_clk,
+	&extal_clk,
+	&pll_clk,
+	&bus_clk,
+	&peripheral0_clk,
+	&peripheral1_clk,
+};
+
+static int div2[] = { 1, 3, 0, 3 }; /* 1, 2/3, reserve, 1/3 */
+static int multipliers[] = { 1, 2, 1, 1 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = div2,
+	.nr_divisors = ARRAY_SIZE(div2),
+	.multipliers = multipliers,
+	.nr_multipliers = ARRAY_SIZE(multipliers),
+};
+
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+};
+
+enum { DIV4_I,
+	DIV4_NR };
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+	SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
+
+/* The mask field specifies the div2 entries that are valid */
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I]  = DIV4(FRQCR, 8, 0xB, CLK_ENABLE_REG_16BIT
+					| CLK_ENABLE_ON_INIT),
+};
+
+enum { MSTP47, MSTP46, MSTP45, MSTP44, MSTP43, MSTP42, MSTP41, MSTP40,
+	MSTP33,	MSTP_NR };
+
+static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP47] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 7, 0), /* SCIF0 */
+	[MSTP46] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 6, 0), /* SCIF1 */
+	[MSTP45] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 5, 0), /* SCIF2 */
+	[MSTP44] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 4, 0), /* SCIF3 */
+	[MSTP43] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 3, 0), /* SCIF4 */
+	[MSTP42] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 2, 0), /* SCIF5 */
+	[MSTP41] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 1, 0), /* SCIF6 */
+	[MSTP40] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 0, 0), /* SCIF7 */
+	[MSTP33] = SH_CLK_MSTP8(&peripheral0_clk, STBCR3, 3, 0), /* MTU2 */
+};
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("rclk", &r_clk),
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+	CLKDEV_CON_ID("peripheral_clk", &peripheral1_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+
+	/* MSTP clocks */
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP47]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP46]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[MSTP45]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.3", &mstp_clks[MSTP44]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.4", &mstp_clks[MSTP43]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP42]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.6", &mstp_clks[MSTP41]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.7", &mstp_clks[MSTP40]),
+};
+
+void __init r7s72100_clock_init(void)
+{
+	int k, ret = 0;
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+	if (!ret)
+		shmobile_clk_init();
+	else
+		panic("failed to setup rza1 clocks\n");
+}
diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
index 5f7fe62..571409b 100644
--- a/arch/arm/mach-shmobile/clock-r8a73a4.c
+++ b/arch/arm/mach-shmobile/clock-r8a73a4.c
@@ -30,10 +30,12 @@
 
 #define SMSTPCR2 0xe6150138
 #define SMSTPCR3 0xe615013c
+#define SMSTPCR4 0xe6150140
 #define SMSTPCR5 0xe6150144
 
 #define FRQCRA		0xE6150000
 #define FRQCRB		0xE6150004
+#define FRQCRC		0xE61500E0
 #define VCLKCR1		0xE6150008
 #define VCLKCR2		0xE615000C
 #define VCLKCR3		0xE615001C
@@ -52,6 +54,7 @@
 #define HSICKCR		0xE615026C
 #define M4CKCR		0xE6150098
 #define PLLECR		0xE61500D0
+#define PLL0CR		0xE61500D8
 #define PLL1CR		0xE6150028
 #define PLL2CR		0xE615002C
 #define PLL2SCR		0xE61501F4
@@ -177,6 +180,7 @@ static struct sh_clk_ops pll_clk_ops = {
 		.mapping	= &cpg_mapping,		\
 	}
 
+PLL_CLOCK(pll0_clk,  &main_clk,      pll_parent_main,      1, 20, PLL0CR,  0);
 PLL_CLOCK(pll1_clk,  &main_clk,      pll_parent_main,       1, 7, PLL1CR,  1);
 PLL_CLOCK(pll2_clk,  &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2CR,  2);
 PLL_CLOCK(pll2s_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2SCR, 4);
@@ -184,6 +188,157 @@ PLL_CLOCK(pll2h_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2HCR, 5);
 
 SH_FIXED_RATIO_CLK(pll1_div2_clk,	pll1_clk,	div2);
 
+static atomic_t frqcr_lock;
+
+/* Several clocks need to access FRQCRB, have to lock */
+static bool frqcr_kick_check(struct clk *clk)
+{
+	return !(ioread32(CPG_MAP(FRQCRB)) & BIT(31));
+}
+
+static int frqcr_kick_do(struct clk *clk)
+{
+	int i;
+
+	/* set KICK bit in FRQCRB to update hardware setting, check success */
+	iowrite32(ioread32(CPG_MAP(FRQCRB)) | BIT(31), CPG_MAP(FRQCRB));
+	for (i = 1000; i; i--)
+		if (ioread32(CPG_MAP(FRQCRB)) & BIT(31))
+			cpu_relax();
+		else
+			return 0;
+
+	return -ETIMEDOUT;
+}
+
+static int zclk_set_rate(struct clk *clk, unsigned long rate)
+{
+	void __iomem *frqcrc;
+	int ret;
+	unsigned long step, p_rate;
+	u32 val;
+
+	if (!clk->parent || !__clk_get(clk->parent))
+		return -ENODEV;
+
+	if (!atomic_inc_and_test(&frqcr_lock) || !frqcr_kick_check(clk)) {
+		ret = -EBUSY;
+		goto done;
+	}
+
+	/*
+	 * Users are supposed to first call clk_set_rate() only with
+	 * clk_round_rate() results. So, we don't fix wrong rates here, but
+	 * guard against them anyway
+	 */
+
+	p_rate = clk_get_rate(clk->parent);
+	if (rate == p_rate) {
+		val = 0;
+	} else {
+		step = DIV_ROUND_CLOSEST(p_rate, 32);
+
+		if (rate > p_rate || rate < step) {
+			ret = -EINVAL;
+			goto done;
+		}
+
+		val = 32 - rate / step;
+	}
+
+	frqcrc = clk->mapped_reg + (FRQCRC - (u32)clk->enable_reg);
+
+	iowrite32((ioread32(frqcrc) & ~(clk->div_mask << clk->enable_bit)) |
+		  (val << clk->enable_bit), frqcrc);
+
+	ret = frqcr_kick_do(clk);
+
+done:
+	atomic_dec(&frqcr_lock);
+	__clk_put(clk->parent);
+	return ret;
+}
+
+static long zclk_round_rate(struct clk *clk, unsigned long rate)
+{
+	/*
+	 * theoretical rate = parent rate * multiplier / 32,
+	 * where 1 <= multiplier <= 32. Therefore we should do
+	 * multiplier = rate * 32 / parent rate
+	 * rounded rate = parent rate * multiplier / 32.
+	 * However, multiplication before division won't fit in 32 bits, so
+	 * we sacrifice some precision by first dividing and then multiplying.
+	 * To find the nearest divisor we calculate both and pick up the best
+	 * one. This avoids 64-bit arithmetics.
+	 */
+	unsigned long step, mul_min, mul_max, rate_min, rate_max;
+
+	rate_max = clk_get_rate(clk->parent);
+
+	/* output freq <= parent */
+	if (rate >= rate_max)
+		return rate_max;
+
+	step = DIV_ROUND_CLOSEST(rate_max, 32);
+	/* output freq >= parent / 32 */
+	if (step >= rate)
+		return step;
+
+	mul_min = rate / step;
+	mul_max = DIV_ROUND_UP(rate, step);
+	rate_min = step * mul_min;
+	if (mul_max == mul_min)
+		return rate_min;
+
+	rate_max = step * mul_max;
+
+	if (rate_max - rate <  rate - rate_min)
+		return rate_max;
+
+	return rate_min;
+}
+
+static unsigned long zclk_recalc(struct clk *clk)
+{
+	void __iomem *frqcrc = FRQCRC - (u32)clk->enable_reg + clk->mapped_reg;
+	unsigned int max = clk->div_mask + 1;
+	unsigned long val = ((ioread32(frqcrc) >> clk->enable_bit) &
+			     clk->div_mask);
+
+	return DIV_ROUND_CLOSEST(clk_get_rate(clk->parent), max) *
+		(max - val);
+}
+
+static struct sh_clk_ops zclk_ops = {
+	.recalc = zclk_recalc,
+	.set_rate = zclk_set_rate,
+	.round_rate = zclk_round_rate,
+};
+
+static struct clk z_clk = {
+	.parent = &pll0_clk,
+	.div_mask = 0x1f,
+	.enable_bit = 8,
+	/* We'll need to access FRQCRB and FRQCRC */
+	.enable_reg = (void __iomem *)FRQCRB,
+	.ops = &zclk_ops,
+};
+
+/*
+ * It seems only 1/2 divider is usable in manual mode. 1/2 / 2/3
+ * switching is only available in auto-DVFS mode
+ */
+SH_FIXED_RATIO_CLK(pll0_div2_clk,	pll0_clk,		div2);
+
+static struct clk z2_clk = {
+	.parent = &pll0_div2_clk,
+	.div_mask = 0x1f,
+	.enable_bit = 0,
+	/* We'll need to access FRQCRB and FRQCRC */
+	.enable_reg = (void __iomem *)FRQCRB,
+	.ops = &zclk_ops,
+};
+
 static struct clk *main_clks[] = {
 	&extalr_clk,
 	&extal1_clk,
@@ -195,22 +350,23 @@ static struct clk *main_clks[] = {
 	&main_div2_clk,
 	&fsiack_clk,
 	&fsibck_clk,
+	&pll0_clk,
 	&pll1_clk,
 	&pll1_div2_clk,
 	&pll2_clk,
 	&pll2s_clk,
 	&pll2h_clk,
+	&z_clk,
+	&pll0_div2_clk,
+	&z2_clk,
 };
 
 /* DIV4 */
 static void div4_kick(struct clk *clk)
 {
-	unsigned long value;
-
-	/* set KICK bit in FRQCRB to update hardware setting */
-	value = ioread32(CPG_MAP(FRQCRB));
-	value |= (1 << 31);
-	iowrite32(value, CPG_MAP(FRQCRB));
+	if (!WARN(!atomic_inc_and_test(&frqcr_lock), "FRQCR* lock broken!\n"))
+		frqcr_kick_do(clk);
+	atomic_dec(&frqcr_lock);
 }
 
 static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, 24, 0, 36, 48, 10};
@@ -348,9 +504,11 @@ static struct clk div6_clks[DIV6_NR] = {
 
 /* MSTP */
 enum {
-	MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203,
-	MSTP315, MSTP314, MSTP313, MSTP312, MSTP305,
-	MSTP522,
+	MSTP218, MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203,
+	MSTP329, MSTP323, MSTP318, MSTP317, MSTP316,
+	MSTP315, MSTP314, MSTP313, MSTP312, MSTP305, MSTP300,
+	MSTP411, MSTP410, MSTP409,
+	MSTP522, MSTP515,
 	MSTP_NR
 };
 
@@ -361,12 +519,23 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP207] = SH_CLK_MSTP32(&div6_clks[DIV6_MP],	SMSTPCR2, 7, 0), /* SCIFB1 */
 	[MSTP216] = SH_CLK_MSTP32(&div6_clks[DIV6_MP],	SMSTPCR2, 16, 0), /* SCIFB2 */
 	[MSTP217] = SH_CLK_MSTP32(&div6_clks[DIV6_MP],	SMSTPCR2, 17, 0), /* SCIFB3 */
+	[MSTP218] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR2, 18, 0), /* DMAC */
+	[MSTP300] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 0, 0), /* IIC2 */
 	[MSTP305] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC1],SMSTPCR3, 5, 0), /* MMCIF1 */
 	[MSTP312] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI2],SMSTPCR3, 12, 0), /* SDHI2 */
 	[MSTP313] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI1],SMSTPCR3, 13, 0), /* SDHI1 */
 	[MSTP314] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI0],SMSTPCR3, 14, 0), /* SDHI0 */
 	[MSTP315] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC0],SMSTPCR3, 15, 0), /* MMCIF0 */
+	[MSTP316] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 16, 0), /* IIC6 */
+	[MSTP317] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 17, 0), /* IIC7 */
+	[MSTP318] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 18, 0), /* IIC0 */
+	[MSTP323] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 23, 0), /* IIC1 */
+	[MSTP329] = SH_CLK_MSTP32(&extalr_clk, SMSTPCR3, 29, 0), /* CMT10 */
+	[MSTP409] = SH_CLK_MSTP32(&main_div2_clk,	SMSTPCR4, 9, 0), /* IIC5 */
+	[MSTP410] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 10, 0), /* IIC4 */
+	[MSTP411] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 11, 0), /* IIC3 */
 	[MSTP522] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR5, 22, 0), /* Thermal */
+	[MSTP515] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR5, 15, 0), /* IIC8 */
 };
 
 static struct clk_lookup lookups[] = {
@@ -386,6 +555,9 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("pll2s",			&pll2s_clk),
 	CLKDEV_CON_ID("pll2h",			&pll2h_clk),
 
+	/* CPU clock */
+	CLKDEV_DEV_ID("cpu0",			&z_clk),
+
 	/* DIV6 */
 	CLKDEV_CON_ID("zb",			&div6_clks[DIV6_ZB]),
 	CLKDEV_CON_ID("vck1",			&div6_clks[DIV6_VCK1]),
@@ -407,7 +579,10 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]),
 	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
 	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]),
+	CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]),
+	CLKDEV_DEV_ID("e6700020.dma-controller", &mstp_clks[MSTP218]),
 	CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
+	CLKDEV_DEV_ID("e6520000.i2c", &mstp_clks[MSTP300]),
 	CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
 	CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]),
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]),
@@ -418,6 +593,15 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]),
 	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]),
 	CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]),
+	CLKDEV_DEV_ID("e6550000.i2c", &mstp_clks[MSTP316]),
+	CLKDEV_DEV_ID("e6560000.i2c", &mstp_clks[MSTP317]),
+	CLKDEV_DEV_ID("e6500000.i2c", &mstp_clks[MSTP318]),
+	CLKDEV_DEV_ID("e6510000.i2c", &mstp_clks[MSTP323]),
+	CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]),
+	CLKDEV_DEV_ID("e60b0000.i2c", &mstp_clks[MSTP409]),
+	CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP410]),
+	CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP411]),
+	CLKDEV_DEV_ID("e6570000.i2c", &mstp_clks[MSTP515]),
 
 	/* for DT */
 	CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
@@ -429,6 +613,8 @@ void __init r8a73a4_clock_init(void)
 	int k, ret = 0;
 	u32 ckscr;
 
+	atomic_set(&frqcr_lock, -1);
+
 	reg = ioremap_nocache(CKSCR, PAGE_SIZE);
 	BUG_ON(!reg);
 	ckscr = ioread32(reg);
diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index de10fd7..c826bca 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -596,7 +596,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("e6bd0000.mmcif",         &mstp_clks[MSTP312]),
 	CLKDEV_DEV_ID("r8a7740-gether",		&mstp_clks[MSTP309]),
 	CLKDEV_DEV_ID("e9a00000.sh-eth",	&mstp_clks[MSTP309]),
-	CLKDEV_DEV_ID("renesas_tpu_pwm",	&mstp_clks[MSTP304]),
+	CLKDEV_DEV_ID("renesas-tpu-pwm",	&mstp_clks[MSTP304]),
+	CLKDEV_DEV_ID("e6600000.pwm",		&mstp_clks[MSTP304]),
 
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2",	&mstp_clks[MSTP415]),
 	CLKDEV_DEV_ID("e6870000.sdhi",          &mstp_clks[MSTP415]),
diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
index a0e9eb7..fb6af83 100644
--- a/arch/arm/mach-shmobile/clock-r8a7778.c
+++ b/arch/arm/mach-shmobile/clock-r8a7778.c
@@ -69,6 +69,15 @@ static struct clk extal_clk = {
 	.mapping = &cpg_mapping,
 };
 
+static struct clk audio_clk_a = {
+};
+
+static struct clk audio_clk_b = {
+};
+
+static struct clk audio_clk_c = {
+};
+
 /*
  * clock ratio of these clock will be updated
  * on r8a7778_clock_init()
@@ -100,17 +109,23 @@ static struct clk *main_clks[] = {
 	&p_clk,
 	&g_clk,
 	&z_clk,
+	&audio_clk_a,
+	&audio_clk_b,
+	&audio_clk_c,
 };
 
 enum {
 	MSTP331,
 	MSTP323, MSTP322, MSTP321,
+	MSTP311, MSTP310,
+	MSTP309, MSTP308, MSTP307,
 	MSTP114,
+	MSTP110, MSTP109,
 	MSTP100,
 	MSTP030,
 	MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
-	MSTP016, MSTP015,
-	MSTP007,
+	MSTP016, MSTP015, MSTP012, MSTP011, MSTP010,
+	MSTP009, MSTP008, MSTP007,
 	MSTP_NR };
 
 static struct clk mstp_clks[MSTP_NR] = {
@@ -118,7 +133,14 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP323] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 23, 0), /* SDHI0 */
 	[MSTP322] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 22, 0), /* SDHI1 */
 	[MSTP321] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 21, 0), /* SDHI2 */
+	[MSTP311] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 11, 0), /* SSI4 */
+	[MSTP310] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 10, 0), /* SSI5 */
+	[MSTP309] = SH_CLK_MSTP32(&p_clk, MSTPCR3,  9, 0), /* SSI6 */
+	[MSTP308] = SH_CLK_MSTP32(&p_clk, MSTPCR3,  8, 0), /* SSI7 */
+	[MSTP307] = SH_CLK_MSTP32(&p_clk, MSTPCR3,  7, 0), /* SSI8 */
 	[MSTP114] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 14, 0), /* Ether */
+	[MSTP110] = SH_CLK_MSTP32(&s_clk, MSTPCR1, 10, 0), /* VIN0 */
+	[MSTP109] = SH_CLK_MSTP32(&s_clk, MSTPCR1,  9, 0), /* VIN1 */
 	[MSTP100] = SH_CLK_MSTP32(&p_clk, MSTPCR1,  0, 0), /* USB0/1 */
 	[MSTP030] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 30, 0), /* I2C0 */
 	[MSTP029] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 29, 0), /* I2C1 */
@@ -132,11 +154,20 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP021] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 21, 0), /* SCIF5 */
 	[MSTP016] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 16, 0), /* TMU0 */
 	[MSTP015] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 15, 0), /* TMU1 */
+	[MSTP012] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 12, 0), /* SSI0 */
+	[MSTP011] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 11, 0), /* SSI1 */
+	[MSTP010] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 10, 0), /* SSI2 */
+	[MSTP009] = SH_CLK_MSTP32(&p_clk, MSTPCR0,  9, 0), /* SSI3 */
+	[MSTP008] = SH_CLK_MSTP32(&p_clk, MSTPCR0,  8, 0), /* SRU */
 	[MSTP007] = SH_CLK_MSTP32(&p_clk, MSTPCR0,  7, 0), /* HSPI */
 };
 
 static struct clk_lookup lookups[] = {
 	/* main */
+	CLKDEV_CON_ID("audio_clk_a",	&audio_clk_a),
+	CLKDEV_CON_ID("audio_clk_b",	&audio_clk_b),
+	CLKDEV_CON_ID("audio_clk_c",	&audio_clk_c),
+	CLKDEV_CON_ID("audio_clk_internal",	&s1_clk),
 	CLKDEV_CON_ID("shyway_clk",	&s_clk),
 	CLKDEV_CON_ID("peripheral_clk",	&p_clk),
 
@@ -146,8 +177,11 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
 	CLKDEV_DEV_ID("r8a777x-ether", &mstp_clks[MSTP114]), /* Ether */
+	CLKDEV_DEV_ID("r8a7778-vin.0", &mstp_clks[MSTP110]), /* VIN0 */
+	CLKDEV_DEV_ID("r8a7778-vin.1", &mstp_clks[MSTP109]), /* VIN1 */
 	CLKDEV_DEV_ID("ehci-platform", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
 	CLKDEV_DEV_ID("ohci-platform", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */
+	CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP100]), /* USB FUNC */
 	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
 	CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */
 	CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */
@@ -163,6 +197,17 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */
 	CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */
 	CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */
+	CLKDEV_DEV_ID("rcar_sound", &mstp_clks[MSTP008]), /* SRU */
+
+	CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP012]),
+	CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP011]),
+	CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP010]),
+	CLKDEV_ICK_ID("ssi.3", "rcar_sound", &mstp_clks[MSTP009]),
+	CLKDEV_ICK_ID("ssi.4", "rcar_sound", &mstp_clks[MSTP311]),
+	CLKDEV_ICK_ID("ssi.5", "rcar_sound", &mstp_clks[MSTP310]),
+	CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP309]),
+	CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP308]),
+	CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP307]),
 };
 
 void __init r8a7778_clock_init(void)
diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index 10340f5..1f7080f 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -112,7 +112,9 @@ static struct clk *main_clks[] = {
 };
 
 enum { MSTP323, MSTP322, MSTP321, MSTP320,
+	MSTP120,
 	MSTP116, MSTP115, MSTP114,
+	MSTP110, MSTP109, MSTP108,
 	MSTP103, MSTP101, MSTP100,
 	MSTP030,
 	MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
@@ -125,9 +127,13 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP322] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 22, 0), /* SDHI1 */
 	[MSTP321] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 21, 0), /* SDHI2 */
 	[MSTP320] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 20, 0), /* SDHI3 */
+	[MSTP120] = SH_CLK_MSTP32(&clks_clk, MSTPCR1, 20, 0), /* VIN3 */
 	[MSTP116] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 16, 0), /* PCIe */
 	[MSTP115] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 15, 0), /* SATA */
 	[MSTP114] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 14, 0), /* Ether */
+	[MSTP110] = SH_CLK_MSTP32(&clks_clk, MSTPCR1, 10, 0), /* VIN0 */
+	[MSTP109] = SH_CLK_MSTP32(&clks_clk, MSTPCR1,  9, 0), /* VIN1 */
+	[MSTP108] = SH_CLK_MSTP32(&clks_clk, MSTPCR1,  8, 0), /* VIN2 */
 	[MSTP103] = SH_CLK_MSTP32(&clks_clk, MSTPCR1,  3, 0), /* DU */
 	[MSTP101] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1,  1, 0), /* USB2 */
 	[MSTP100] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1,  0, 0), /* USB0/1 */
@@ -162,10 +168,14 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("peripheral_clk",	&clkp_clk),
 
 	/* MSTP32 clocks */
+	CLKDEV_DEV_ID("r8a7779-vin.3", &mstp_clks[MSTP120]), /* VIN3 */
 	CLKDEV_DEV_ID("rcar-pcie", &mstp_clks[MSTP116]), /* PCIe */
 	CLKDEV_DEV_ID("sata_rcar", &mstp_clks[MSTP115]), /* SATA */
 	CLKDEV_DEV_ID("fc600000.sata", &mstp_clks[MSTP115]), /* SATA w/DT */
 	CLKDEV_DEV_ID("r8a777x-ether", &mstp_clks[MSTP114]), /* Ether */
+	CLKDEV_DEV_ID("r8a7779-vin.0", &mstp_clks[MSTP110]), /* VIN0 */
+	CLKDEV_DEV_ID("r8a7779-vin.1", &mstp_clks[MSTP109]), /* VIN1 */
+	CLKDEV_DEV_ID("r8a7779-vin.2", &mstp_clks[MSTP108]), /* VIN2 */
 	CLKDEV_DEV_ID("ehci-platform.1", &mstp_clks[MSTP101]), /* USB EHCI port2 */
 	CLKDEV_DEV_ID("ohci-platform.1", &mstp_clks[MSTP101]), /* USB OHCI port2 */
 	CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
@@ -190,7 +200,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP320]), /* SDHI3 */
-	CLKDEV_DEV_ID("rcar-du.0", &mstp_clks[MSTP103]), /* DU */
+	CLKDEV_DEV_ID("rcar-du-r8a7779", &mstp_clks[MSTP103]), /* DU */
 };
 
 void __init r8a7779_clock_init(void)
diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index 5d71313..a64f965 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -24,6 +24,7 @@
 #include <linux/clkdev.h>
 #include <mach/clock.h>
 #include <mach/common.h>
+#include <mach/r8a7790.h>
 
 /*
  *   MD		EXTAL		PLL0	PLL1	PLL3
@@ -42,16 +43,17 @@
  *	see "p1 / 2" on R8A7790_CLOCK_ROOT() below
  */
 
-#define MD(nr)	(1 << nr)
-
 #define CPG_BASE 0xe6150000
 #define CPG_LEN 0x1000
 
+#define SMSTPCR1 0xe6150134
 #define SMSTPCR2 0xe6150138
 #define SMSTPCR3 0xe615013c
+#define SMSTPCR5 0xe6150144
 #define SMSTPCR7 0xe615014c
+#define SMSTPCR8 0xe6150990
+#define SMSTPCR9 0xe6150994
 
-#define MODEMR		0xE6160060
 #define SDCKCR		0xE6150074
 #define SD2CKCR		0xE6150078
 #define SD3CKCR		0xE615007C
@@ -180,16 +182,33 @@ static struct clk div6_clks[DIV6_NR] = {
 
 /* MSTP */
 enum {
-	MSTP721, MSTP720,
+	MSTP931, MSTP930, MSTP929, MSTP928,
+	MSTP813,
+	MSTP726, MSTP725, MSTP724, MSTP723, MSTP722, MSTP721, MSTP720,
 	MSTP717, MSTP716,
+	MSTP522,
 	MSTP315, MSTP314, MSTP313, MSTP312, MSTP311, MSTP305, MSTP304,
 	MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202,
+	MSTP124,
 	MSTP_NR
 };
 
 static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP931] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 31, 0), /* I2C0 */
+	[MSTP930] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 30, 0), /* I2C1 */
+	[MSTP929] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 29, 0), /* I2C2 */
+	[MSTP928] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 28, 0), /* I2C3 */
+	[MSTP813] = SH_CLK_MSTP32(&p_clk, SMSTPCR8, 13, 0), /* Ether */
+	[MSTP726] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 26, 0), /* LVDS0 */
+	[MSTP725] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 25, 0), /* LVDS1 */
+	[MSTP724] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 24, 0), /* DU0 */
+	[MSTP723] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 23, 0), /* DU1 */
+	[MSTP722] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 22, 0), /* DU2 */
 	[MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
 	[MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
+	[MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */
+	[MSTP716] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 16, 0), /* HSCIF1 */
+	[MSTP522] = SH_CLK_MSTP32(&extal_clk, SMSTPCR5, 22, 0), /* Thermal */
 	[MSTP315] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC0], SMSTPCR3, 15, 0), /* MMC0 */
 	[MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_SD0], SMSTPCR3, 14, 0), /* SDHI0 */
 	[MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_SD1], SMSTPCR3, 13, 0), /* SDHI1 */
@@ -203,8 +222,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
 	[MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
 	[MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
-	[MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */
-	[MSTP716] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 16, 0), /* HSCIF1 */
+	[MSTP124] = SH_CLK_MSTP32(&rclk_clk, SMSTPCR1, 24, 0), /* CMT0 */
 };
 
 static struct clk_lookup lookups[] = {
@@ -244,6 +262,11 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("ssprs",		&div6_clks[DIV6_SSPRS]),
 
 	/* MSTP */
+	CLKDEV_ICK_ID("lvds.0", "rcar-du-r8a7790", &mstp_clks[MSTP726]),
+	CLKDEV_ICK_ID("lvds.1", "rcar-du-r8a7790", &mstp_clks[MSTP725]),
+	CLKDEV_ICK_ID("du.0", "rcar-du-r8a7790", &mstp_clks[MSTP724]),
+	CLKDEV_ICK_ID("du.1", "rcar-du-r8a7790", &mstp_clks[MSTP723]),
+	CLKDEV_ICK_ID("du.2", "rcar-du-r8a7790", &mstp_clks[MSTP722]),
 	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
 	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
 	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]),
@@ -254,6 +277,12 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]),
 	CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]),
 	CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]),
+	CLKDEV_DEV_ID("e6508000.i2c", &mstp_clks[MSTP931]),
+	CLKDEV_DEV_ID("e6518000.i2c", &mstp_clks[MSTP930]),
+	CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP929]),
+	CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP928]),
+	CLKDEV_DEV_ID("r8a7790-ether", &mstp_clks[MSTP813]),
+	CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
 	CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]),
 	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]),
 	CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]),
@@ -266,6 +295,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP311]),
 	CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]),
 	CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
+	CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
 };
 
 #define R8A7790_CLOCK_ROOT(e, m, p0, p1, p30, p31)		\
@@ -280,14 +310,9 @@ static struct clk_lookup lookups[] = {
 
 void __init r8a7790_clock_init(void)
 {
-	void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
-	u32 mode;
+	u32 mode = rcar_gen2_read_mode_pins();
 	int k, ret = 0;
 
-	BUG_ON(!modemr);
-	mode = ioread32(modemr);
-	iounmap(modemr);
-
 	switch (mode & (MD(14) | MD(13))) {
 	case 0:
 		R8A7790_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88);
diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c
new file mode 100644
index 0000000..c9a26f1
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-r8a7791.c
@@ -0,0 +1,237 @@
+/*
+ * r8a7791 clock framework support
+ *
+ * Copyright (C) 2013  Renesas Electronics Corporation
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/sh_clk.h>
+#include <linux/clkdev.h>
+#include <mach/clock.h>
+#include <mach/common.h>
+
+/*
+ *   MD		EXTAL		PLL0	PLL1	PLL3
+ * 14 13 19	(MHz)		*1	*1
+ *---------------------------------------------------
+ * 0  0  0	15 x 1		x172/2	x208/2	x106
+ * 0  0  1	15 x 1		x172/2	x208/2	x88
+ * 0  1  0	20 x 1		x130/2	x156/2	x80
+ * 0  1  1	20 x 1		x130/2	x156/2	x66
+ * 1  0  0	26 / 2		x200/2	x240/2	x122
+ * 1  0  1	26 / 2		x200/2	x240/2	x102
+ * 1  1  0	30 / 2		x172/2	x208/2	x106
+ * 1  1  1	30 / 2		x172/2	x208/2	x88
+ *
+ * *1 :	Table 7.6 indicates VCO ouput (PLLx = VCO/2)
+ *	see "p1 / 2" on R8A7791_CLOCK_ROOT() below
+ */
+
+#define MD(nr)	(1 << nr)
+
+#define CPG_BASE 0xe6150000
+#define CPG_LEN 0x1000
+
+#define SMSTPCR0	0xE6150130
+#define SMSTPCR1	0xE6150134
+#define SMSTPCR2	0xe6150138
+#define SMSTPCR3	0xE615013C
+#define SMSTPCR5	0xE6150144
+#define SMSTPCR7	0xe615014c
+#define SMSTPCR8	0xE6150990
+#define SMSTPCR9	0xE6150994
+#define SMSTPCR10	0xE6150998
+#define SMSTPCR11	0xE615099C
+
+#define MODEMR		0xE6160060
+#define SDCKCR		0xE6150074
+#define SD2CKCR		0xE6150078
+#define SD3CKCR		0xE615007C
+#define MMC0CKCR	0xE6150240
+#define MMC1CKCR	0xE6150244
+#define SSPCKCR		0xE6150248
+#define SSPRSCKCR	0xE615024C
+
+static struct clk_mapping cpg_mapping = {
+	.phys   = CPG_BASE,
+	.len    = CPG_LEN,
+};
+
+static struct clk extal_clk = {
+	/* .rate will be updated on r8a7791_clock_init() */
+	.mapping	= &cpg_mapping,
+};
+
+static struct sh_clk_ops followparent_clk_ops = {
+	.recalc	= followparent_recalc,
+};
+
+static struct clk main_clk = {
+	/* .parent will be set r8a73a4_clock_init */
+	.ops	= &followparent_clk_ops,
+};
+
+/*
+ * clock ratio of these clock will be updated
+ * on r8a7791_clock_init()
+ */
+SH_FIXED_RATIO_CLK_SET(pll1_clk,		main_clk,	1, 1);
+SH_FIXED_RATIO_CLK_SET(pll3_clk,		main_clk,	1, 1);
+
+/* fixed ratio clock */
+SH_FIXED_RATIO_CLK_SET(extal_div2_clk,		extal_clk,	1, 2);
+SH_FIXED_RATIO_CLK_SET(cp_clk,			extal_clk,	1, 2);
+
+SH_FIXED_RATIO_CLK_SET(pll1_div2_clk,		pll1_clk,	1, 2);
+SH_FIXED_RATIO_CLK_SET(hp_clk,			pll1_clk,	1, 12);
+SH_FIXED_RATIO_CLK_SET(p_clk,			pll1_clk,	1, 24);
+SH_FIXED_RATIO_CLK_SET(rclk_clk,		pll1_clk,	1, (48 * 1024));
+SH_FIXED_RATIO_CLK_SET(mp_clk,			pll1_div2_clk,	1, 15);
+
+static struct clk *main_clks[] = {
+	&extal_clk,
+	&extal_div2_clk,
+	&main_clk,
+	&pll1_clk,
+	&pll1_div2_clk,
+	&pll3_clk,
+	&hp_clk,
+	&p_clk,
+	&rclk_clk,
+	&mp_clk,
+	&cp_clk,
+};
+
+/* MSTP */
+enum {
+	MSTP721, MSTP720,
+	MSTP719, MSTP718, MSTP715, MSTP714,
+	MSTP216, MSTP207, MSTP206,
+	MSTP204, MSTP203, MSTP202, MSTP1105, MSTP1106, MSTP1107,
+	MSTP124,
+	MSTP_NR
+};
+
+static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
+	[MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
+	[MSTP719] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 19, 0), /* SCIF2 */
+	[MSTP718] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 18, 0), /* SCIF3 */
+	[MSTP715] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 15, 0), /* SCIF4 */
+	[MSTP714] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 14, 0), /* SCIF5 */
+	[MSTP216] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
+	[MSTP207] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
+	[MSTP206] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 6, 0), /* SCIFB0 */
+	[MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
+	[MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
+	[MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
+	[MSTP1105] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 5, 0), /* SCIFA3 */
+	[MSTP1106] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 6, 0), /* SCIFA4 */
+	[MSTP1107] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 7, 0), /* SCIFA5 */
+	[MSTP124] = SH_CLK_MSTP32(&rclk_clk, SMSTPCR1, 24, 0), /* CMT0 */
+};
+
+static struct clk_lookup lookups[] = {
+
+	/* main clocks */
+	CLKDEV_CON_ID("extal",		&extal_clk),
+	CLKDEV_CON_ID("extal_div2",	&extal_div2_clk),
+	CLKDEV_CON_ID("main",		&main_clk),
+	CLKDEV_CON_ID("pll1",		&pll1_clk),
+	CLKDEV_CON_ID("pll1_div2",	&pll1_div2_clk),
+	CLKDEV_CON_ID("pll3",		&pll3_clk),
+	CLKDEV_CON_ID("hp",		&hp_clk),
+	CLKDEV_CON_ID("p",		&p_clk),
+	CLKDEV_CON_ID("rclk",		&rclk_clk),
+	CLKDEV_CON_ID("mp",		&mp_clk),
+	CLKDEV_CON_ID("cp",		&cp_clk),
+	CLKDEV_CON_ID("peripheral_clk", &hp_clk),
+
+	/* MSTP */
+	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
+	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
+	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]), /* SCIFB0 */
+	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]), /* SCIFB1 */
+	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]), /* SCIFB2 */
+	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP202]), /* SCIFA2 */
+	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP721]), /* SCIF0 */
+	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]), /* SCIF1 */
+	CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP719]), /* SCIF2 */
+	CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP718]), /* SCIF3 */
+	CLKDEV_DEV_ID("sh-sci.10", &mstp_clks[MSTP715]), /* SCIF4 */
+	CLKDEV_DEV_ID("sh-sci.11", &mstp_clks[MSTP714]), /* SCIF5 */
+	CLKDEV_DEV_ID("sh-sci.12", &mstp_clks[MSTP1105]), /* SCIFA3 */
+	CLKDEV_DEV_ID("sh-sci.13", &mstp_clks[MSTP1106]), /* SCIFA4 */
+	CLKDEV_DEV_ID("sh-sci.14", &mstp_clks[MSTP1107]), /* SCIFA5 */
+	CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
+};
+
+#define R8A7791_CLOCK_ROOT(e, m, p0, p1, p30, p31)		\
+	extal_clk.rate	= e * 1000 * 1000;			\
+	main_clk.parent	= m;					\
+	SH_CLK_SET_RATIO(&pll1_clk_ratio, p1 / 2, 1);		\
+	if (mode & MD(19))					\
+		SH_CLK_SET_RATIO(&pll3_clk_ratio, p31, 1);	\
+	else							\
+		SH_CLK_SET_RATIO(&pll3_clk_ratio, p30, 1)
+
+
+void __init r8a7791_clock_init(void)
+{
+	void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
+	u32 mode;
+	int k, ret = 0;
+
+	BUG_ON(!modemr);
+	mode = ioread32(modemr);
+	iounmap(modemr);
+
+	switch (mode & (MD(14) | MD(13))) {
+	case 0:
+		R8A7791_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88);
+		break;
+	case MD(13):
+		R8A7791_CLOCK_ROOT(20, &extal_clk, 130, 156, 80, 66);
+		break;
+	case MD(14):
+		R8A7791_CLOCK_ROOT(26, &extal_div2_clk, 200, 240, 122, 102);
+		break;
+	case MD(13) | MD(14):
+		R8A7791_CLOCK_ROOT(30, &extal_div2_clk, 172, 208, 106, 88);
+		break;
+	}
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	if (!ret)
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		shmobile_clk_init();
+	else
+		goto epanic;
+
+	return;
+
+epanic:
+	panic("failed to setup r8a7791 clocks\n");
+}
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index d9fd033..c92c023 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -555,7 +555,7 @@ enum { MSTP001,
 	MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
 	MSTP331, MSTP329, MSTP328, MSTP325, MSTP323, MSTP322,
 	MSTP314, MSTP313, MSTP312, MSTP311,
-	MSTP303, MSTP302, MSTP301, MSTP300,
+	MSTP304, MSTP303, MSTP302, MSTP301, MSTP300,
 	MSTP411, MSTP410, MSTP403,
 	MSTP_NR };
 
@@ -593,6 +593,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */
 	[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
 	[MSTP311] = MSTP(&div6_clks[DIV6_SDHI2], SMSTPCR3, 11, 0), /* SDHI2 */
+	[MSTP304] = MSTP(&main_div2_clk, SMSTPCR3, 4, 0), /* TPU0 */
 	[MSTP303] = MSTP(&main_div2_clk, SMSTPCR3, 3, 0), /* TPU1 */
 	[MSTP302] = MSTP(&main_div2_clk, SMSTPCR3, 2, 0), /* TPU2 */
 	[MSTP301] = MSTP(&main_div2_clk, SMSTPCR3, 1, 0), /* TPU3 */
@@ -615,7 +616,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("smp_twd", &twd_clk), /* smp_twd */
 
 	/* DIV4 clocks */
-	CLKDEV_DEV_ID("cpufreq-cpu0", &div4_clks[DIV4_Z]),
+	CLKDEV_DEV_ID("cpu0", &div4_clks[DIV4_Z]),
 
 	/* DIV6 clocks */
 	CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
@@ -669,10 +670,11 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), /* MMCIF0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */
 	CLKDEV_DEV_ID("ee140000.sdhi", &mstp_clks[MSTP311]), /* SDHI2 */
-	CLKDEV_DEV_ID("leds-renesas-tpu.12", &mstp_clks[MSTP303]), /* TPU1 */
-	CLKDEV_DEV_ID("leds-renesas-tpu.21", &mstp_clks[MSTP302]), /* TPU2 */
-	CLKDEV_DEV_ID("leds-renesas-tpu.30", &mstp_clks[MSTP301]), /* TPU3 */
-	CLKDEV_DEV_ID("leds-renesas-tpu.41", &mstp_clks[MSTP300]), /* TPU4 */
+	CLKDEV_DEV_ID("renesas-tpu-pwm.0", &mstp_clks[MSTP304]), /* TPU0 */
+	CLKDEV_DEV_ID("renesas-tpu-pwm.1", &mstp_clks[MSTP303]), /* TPU1 */
+	CLKDEV_DEV_ID("renesas-tpu-pwm.2", &mstp_clks[MSTP302]), /* TPU2 */
+	CLKDEV_DEV_ID("renesas-tpu-pwm.3", &mstp_clks[MSTP301]), /* TPU3 */
+	CLKDEV_DEV_ID("renesas-tpu-pwm.4", &mstp_clks[MSTP300]), /* TPU4 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */
 	CLKDEV_DEV_ID("e6826000.i2c", &mstp_clks[MSTP411]), /* I2C3 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */
diff --git a/arch/arm/mach-shmobile/headsmp-scu.S b/arch/arm/mach-shmobile/headsmp-scu.S
index bfd9200..f45dde7 100644
--- a/arch/arm/mach-shmobile/headsmp-scu.S
+++ b/arch/arm/mach-shmobile/headsmp-scu.S
@@ -37,13 +37,15 @@ ENTRY(shmobile_boot_scu)
 	lsl	r1, r1, #3		@ we will shift by cpu_id * 8 bits
 	ldr	r2, [r0, #8]		@ SCU Power Status Register
 	mov	r3, #3
-	bic	r2, r2, r3, lsl r1	@ Clear bits of our CPU (Run Mode)
+	lsl	r3, r3, r1
+	bic	r2, r2, r3		@ Clear bits of our CPU (Run Mode)
 	str	r2, [r0, #8]		@ write back
 
 	b	shmobile_invalidate_start
 ENDPROC(shmobile_boot_scu)
 
 	.text
+	.align	2
 	.globl	shmobile_scu_base
 shmobile_scu_base:
 	.space	4
diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S
index a9d2124..e5be5c8 100644
--- a/arch/arm/mach-shmobile/headsmp.S
+++ b/arch/arm/mach-shmobile/headsmp.S
@@ -24,15 +24,71 @@ ENDPROC(shmobile_invalidate_start)
  * This will be mapped at address 0 by SBAR register.
  * We need _long_ jump to the physical address.
  */
+	.arm
 	.align  12
 ENTRY(shmobile_boot_vector)
 	ldr     r0, 2f
-	ldr     pc, 1f
+	ldr     r1, 1f
+	bx	r1
+
 ENDPROC(shmobile_boot_vector)
 
+	.align	2
 	.globl	shmobile_boot_fn
 shmobile_boot_fn:
 1:	.space	4
 	.globl	shmobile_boot_arg
 shmobile_boot_arg:
 2:	.space	4
+	.globl	shmobile_boot_size
+shmobile_boot_size:
+	.long	. - shmobile_boot_vector
+
+/*
+ * Per-CPU SMP boot function/argument selection code based on MPIDR
+ */
+
+ENTRY(shmobile_smp_boot)
+						@ r0 = MPIDR_HWID_BITMASK
+	mrc	p15, 0, r1, c0, c0, 5		@ r1 = MPIDR
+	and	r0, r1, r0			@ r0 = cpu_logical_map() value
+	mov	r1, #0				@ r1 = CPU index
+	adr	r5, 1f				@ array of per-cpu mpidr values
+	adr	r6, 2f				@ array of per-cpu functions
+	adr	r7, 3f				@ array of per-cpu arguments
+
+shmobile_smp_boot_find_mpidr:
+	ldr	r8, [r5, r1, lsl #2]
+	cmp	r8, r0
+	bne	shmobile_smp_boot_next
+
+	ldr	r9, [r6, r1, lsl #2]
+	cmp	r9, #0
+	bne	shmobile_smp_boot_found
+
+shmobile_smp_boot_next:
+	add	r1, r1, #1
+	cmp	r1, #CONFIG_NR_CPUS
+	blo	shmobile_smp_boot_find_mpidr
+
+	b	shmobile_smp_sleep
+
+shmobile_smp_boot_found:
+	ldr	r0, [r7, r1, lsl #2]
+	mov	pc, r9
+ENDPROC(shmobile_smp_boot)
+
+ENTRY(shmobile_smp_sleep)
+	wfi
+	b	shmobile_smp_boot
+ENDPROC(shmobile_smp_sleep)
+
+	.globl	shmobile_smp_mpidr
+shmobile_smp_mpidr:
+1:	.space	CONFIG_NR_CPUS * 4
+	.globl	shmobile_smp_fn
+shmobile_smp_fn:
+2:	.space	CONFIG_NR_CPUS * 4
+	.globl	shmobile_smp_arg
+shmobile_smp_arg:
+3:	.space	CONFIG_NR_CPUS * 4
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index e818f02..e319805 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -2,7 +2,6 @@
 #define __ARCH_MACH_COMMON_H
 
 extern void shmobile_earlytimer_init(void);
-extern void shmobile_timer_init(void);
 extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz,
 			 unsigned int mult, unsigned int div);
 struct twd_local_timer;
@@ -10,7 +9,23 @@ extern void shmobile_setup_console(void);
 extern void shmobile_boot_vector(void);
 extern unsigned long shmobile_boot_fn;
 extern unsigned long shmobile_boot_arg;
+extern unsigned long shmobile_boot_size;
+extern void shmobile_smp_boot(void);
+extern void shmobile_smp_sleep(void);
+extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn,
+			      unsigned long arg);
+extern int shmobile_smp_cpu_disable(unsigned int cpu);
+extern void shmobile_invalidate_start(void);
 extern void shmobile_boot_scu(void);
+extern void shmobile_smp_scu_prepare_cpus(unsigned int max_cpus);
+extern void shmobile_smp_scu_cpu_die(unsigned int cpu);
+extern int shmobile_smp_scu_cpu_kill(unsigned int cpu);
+extern void shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus);
+extern int shmobile_smp_apmu_boot_secondary(unsigned int cpu,
+					    struct task_struct *idle);
+extern void shmobile_smp_apmu_cpu_die(unsigned int cpu);
+extern int shmobile_smp_apmu_cpu_kill(unsigned int cpu);
+extern void shmobile_invalidate_start(void);
 struct clk;
 extern int shmobile_clk_init(void);
 extern void shmobile_handle_irq_intc(struct pt_regs *);
@@ -31,7 +46,6 @@ static inline int shmobile_cpuidle_init(void) { return 0; }
 #endif
 
 extern void __iomem *shmobile_scu_base;
-extern void shmobile_smp_init_cpus(unsigned int ncores);
 
 static inline void __init shmobile_init_late(void)
 {
diff --git a/arch/arm/mach-shmobile/include/mach/dma.h b/arch/arm/mach-shmobile/include/mach/dma.h
deleted file mode 100644
index 40a8c17..0000000
--- a/arch/arm/mach-shmobile/include/mach/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h
index ac37517..c2eb756 100644
--- a/arch/arm/mach-shmobile/include/mach/emev2.h
+++ b/arch/arm/mach-shmobile/include/mach/emev2.h
@@ -2,11 +2,9 @@
 #define __ASM_EMEV2_H__
 
 extern void emev2_map_io(void);
-extern void emev2_init_irq(void);
-extern void emev2_add_early_devices(void);
+extern void emev2_init_delay(void);
 extern void emev2_add_standard_devices(void);
 extern void emev2_clock_init(void);
-extern void emev2_set_boot_vector(unsigned long value);
 
 #define EMEV2_GPIO_BASE 200
 #define EMEV2_GPIO_IRQ(n) (EMEV2_GPIO_BASE + (n))
diff --git a/arch/arm/mach-shmobile/include/mach/hardware.h b/arch/arm/mach-shmobile/include/mach/hardware.h
deleted file mode 100644
index 99264a5..0000000
--- a/arch/arm/mach-shmobile/include/mach/hardware.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASM_MACH_HARDWARE_H
-#define __ASM_MACH_HARDWARE_H
-
-#endif /* __ASM_MACH_HARDWARE_H */
diff --git a/arch/arm/mach-shmobile/include/mach/r7s72100.h b/arch/arm/mach-shmobile/include/mach/r7s72100.h
new file mode 100644
index 0000000..5f34b20
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/r7s72100.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_R7S72100_H__
+#define __ASM_R7S72100_H__
+
+void r7s72100_add_dt_devices(void);
+void r7s72100_clock_init(void);
+void r7s72100_init_early(void);
+
+#endif /* __ASM_R7S72100_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a73a4.h b/arch/arm/mach-shmobile/include/mach/r8a73a4.h
index f043103..ce8bdd1 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a73a4.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a73a4.h
@@ -1,8 +1,19 @@
 #ifndef __ASM_R8A73A4_H__
 #define __ASM_R8A73A4_H__
 
+/* DMA slave IDs */
+enum {
+	SHDMA_SLAVE_INVALID,
+	SHDMA_SLAVE_MMCIF0_TX,
+	SHDMA_SLAVE_MMCIF0_RX,
+	SHDMA_SLAVE_MMCIF1_TX,
+	SHDMA_SLAVE_MMCIF1_RX,
+};
+
 void r8a73a4_add_standard_devices(void);
+void r8a73a4_add_dt_devices(void);
 void r8a73a4_clock_init(void);
 void r8a73a4_pinmux_init(void);
+void r8a73a4_init_early(void);
 
 #endif /* __ASM_R8A73A4_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/include/mach/r8a7740.h
index b34d19b..d07932f 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7740.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7740.h
@@ -42,11 +42,12 @@ enum {
 	SHDMA_SLAVE_FSIB_TX,
 	SHDMA_SLAVE_USBHS_TX,
 	SHDMA_SLAVE_USBHS_RX,
+	SHDMA_SLAVE_MMCIF_TX,
+	SHDMA_SLAVE_MMCIF_RX,
 };
 
 extern void r8a7740_meram_workaround(void);
 extern void r8a7740_init_delay(void);
-extern void r8a7740_init_irq(void);
 extern void r8a7740_init_irq_of(void);
 extern void r8a7740_map_io(void);
 extern void r8a7740_add_early_devices(void);
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h
index 851d027..441886c 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7778.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h
@@ -1,6 +1,7 @@
 /*
  * Copyright (C) 2013  Renesas Solutions Corp.
  * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ * Copyright (C) 2013  Cogent Embedded, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -18,26 +19,28 @@
 #ifndef __ASM_R8A7778_H__
 #define __ASM_R8A7778_H__
 
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/sh_eth.h>
-#include <linux/platform_data/usb-rcar-phy.h>
+#include <linux/platform_data/camera-rcar.h>
+
+/* HPB-DMA slave IDs */
+enum {
+	HPBDMA_SLAVE_DUMMY,
+	HPBDMA_SLAVE_SDHI0_TX,
+	HPBDMA_SLAVE_SDHI0_RX,
+};
 
 extern void r8a7778_add_standard_devices(void);
 extern void r8a7778_add_standard_devices_dt(void);
-extern void r8a7778_add_ether_device(struct sh_eth_plat_data *pdata);
-extern void r8a7778_add_usb_phy_device(struct rcar_phy_platform_data *pdata);
-extern void r8a7778_add_i2c_device(int id);
-extern void r8a7778_add_hspi_device(int id);
-extern void r8a7778_add_mmc_device(struct sh_mmcif_plat_data *info);
+extern void r8a7778_add_dt_devices(void);
 
 extern void r8a7778_init_late(void);
 extern void r8a7778_init_delay(void);
-extern void r8a7778_init_irq(void);
 extern void r8a7778_init_irq_dt(void);
 extern void r8a7778_clock_init(void);
 extern void r8a7778_init_irq_extpin(int irlm);
+extern void r8a7778_init_irq_extpin_dt(int irlm);
 extern void r8a7778_pinmux_init(void);
-extern void r8a7778_sdhi_init(int id, struct sh_mobile_sdhi_info *info);
+
+extern int r8a7778_usb_phy_power(bool enable);
 
 #endif /* __ASM_R8A7778_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h
index fc47073..17af34e 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7779.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h
@@ -4,7 +4,14 @@
 #include <linux/sh_clk.h>
 #include <linux/pm_domain.h>
 #include <linux/sh_eth.h>
-#include <linux/platform_data/usb-rcar-phy.h>
+#include <linux/platform_data/camera-rcar.h>
+
+/* HPB-DMA slave IDs */
+enum {
+	HPBDMA_SLAVE_DUMMY,
+	HPBDMA_SLAVE_SDHI0_TX,
+	HPBDMA_SLAVE_SDHI0_RX,
+};
 
 struct platform_device;
 
@@ -25,8 +32,8 @@ static inline struct r8a7779_pm_ch *to_r8a7779_ch(struct generic_pm_domain *d)
 }
 
 extern void r8a7779_init_delay(void);
-extern void r8a7779_init_irq(void);
 extern void r8a7779_init_irq_extpin(int irlm);
+extern void r8a7779_init_irq_extpin_dt(int irlm);
 extern void r8a7779_init_irq_dt(void);
 extern void r8a7779_map_io(void);
 extern void r8a7779_earlytimer_init(void);
@@ -34,7 +41,8 @@ extern void r8a7779_add_early_devices(void);
 extern void r8a7779_add_standard_devices(void);
 extern void r8a7779_add_standard_devices_dt(void);
 extern void r8a7779_add_ether_device(struct sh_eth_plat_data *pdata);
-extern void r8a7779_add_usb_phy_device(struct rcar_phy_platform_data *pdata);
+extern void r8a7779_add_vin_device(int idx,
+				   struct rcar_vin_platform_data *pdata);
 extern void r8a7779_init_late(void);
 extern void r8a7779_clock_init(void);
 extern void r8a7779_pinmux_init(void);
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/include/mach/r8a7790.h
index 2e919e6..5fbfa28 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7790.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7790.h
@@ -1,9 +1,13 @@
 #ifndef __ASM_R8A7790_H__
 #define __ASM_R8A7790_H__
 
+#include <mach/rcar-gen2.h>
+
 void r8a7790_add_standard_devices(void);
+void r8a7790_add_dt_devices(void);
 void r8a7790_clock_init(void);
 void r8a7790_pinmux_init(void);
-void r8a7790_timer_init(void);
+void r8a7790_init_early(void);
+extern struct smp_operations r8a7790_smp_ops;
 
 #endif /* __ASM_R8A7790_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7791.h b/arch/arm/mach-shmobile/include/mach/r8a7791.h
new file mode 100644
index 0000000..051ead3
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/r8a7791.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_R8A7791_H__
+#define __ASM_R8A7791_H__
+
+void r8a7791_add_standard_devices(void);
+void r8a7791_add_dt_devices(void);
+void r8a7791_clock_init(void);
+void r8a7791_init_early(void);
+extern struct smp_operations r8a7791_smp_ops;
+
+#endif /* __ASM_R8A7791_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/rcar-gen2.h b/arch/arm/mach-shmobile/include/mach/rcar-gen2.h
new file mode 100644
index 0000000..43f606e
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/rcar-gen2.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_RCAR_GEN2_H__
+#define __ASM_RCAR_GEN2_H__
+
+void rcar_gen2_timer_init(void);
+#define MD(nr) BIT(nr)
+u32 rcar_gen2_read_mode_pins(void);
+
+#endif /* __ASM_RCAR_GEN2_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h
index eb7a432..359b582 100644
--- a/arch/arm/mach-shmobile/include/mach/sh73a0.h
+++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h
@@ -1,379 +1,6 @@
 #ifndef __ASM_SH73A0_H__
 #define __ASM_SH73A0_H__
 
-/* Pin Function Controller:
- * GPIO_FN_xx - GPIO used to select pin function and MSEL switch
- * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
- */
-enum {
-	/* Hardware manual Table 25-1 (GPIO) */
-	GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
-	GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
-
-	GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
-	GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
-
-	GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
-	GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
-
-	GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
-	GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
-
-	GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
-	GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
-
-	GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
-	GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
-
-	GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
-	GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
-
-	GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
-	GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
-
-	GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
-	GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
-
-	GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
-	GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
-
-	GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
-	GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
-
-	GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
-	GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118,
-
-	GPIO_PORT128, GPIO_PORT129,
-
-	GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
-	GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
-
-	GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
-	GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
-
-	GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
-	GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
-
-	GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
-
-	GPIO_PORT192, GPIO_PORT193, GPIO_PORT194,
-	GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199,
-
-	GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204,
-	GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209,
-
-	GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214,
-	GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219,
-
-	GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224,
-	GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229,
-
-	GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234,
-	GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239,
-
-	GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244,
-	GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249,
-
-	GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254,
-	GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259,
-
-	GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264,
-	GPIO_PORT265, GPIO_PORT266, GPIO_PORT267, GPIO_PORT268, GPIO_PORT269,
-
-	GPIO_PORT270, GPIO_PORT271, GPIO_PORT272, GPIO_PORT273, GPIO_PORT274,
-	GPIO_PORT275, GPIO_PORT276, GPIO_PORT277, GPIO_PORT278, GPIO_PORT279,
-
-	GPIO_PORT280, GPIO_PORT281, GPIO_PORT282,
-
-	GPIO_PORT288, GPIO_PORT289,
-
-	GPIO_PORT290, GPIO_PORT291, GPIO_PORT292, GPIO_PORT293, GPIO_PORT294,
-	GPIO_PORT295, GPIO_PORT296, GPIO_PORT297, GPIO_PORT298, GPIO_PORT299,
-
-	GPIO_PORT300, GPIO_PORT301, GPIO_PORT302, GPIO_PORT303, GPIO_PORT304,
-	GPIO_PORT305, GPIO_PORT306, GPIO_PORT307, GPIO_PORT308, GPIO_PORT309,
-
-	/* Table 25-1 (Function 0-7) */
-	GPIO_FN_GPI0 = 310,
-	GPIO_FN_GPI1,
-	GPIO_FN_GPI2,
-	GPIO_FN_GPI3,
-	GPIO_FN_GPI4,
-	GPIO_FN_GPI5,
-	GPIO_FN_GPI6,
-	GPIO_FN_GPI7,
-	GPIO_FN_GPO7, GPIO_FN_MFG0_OUT2,
-	GPIO_FN_GPO6, GPIO_FN_MFG1_OUT2,
-	GPIO_FN_GPO5,
-	GPIO_FN_PORT16_VIO_CKOR,
-	GPIO_FN_PORT19_VIO_CKO2,
-	GPIO_FN_GPO0,
-	GPIO_FN_GPO1,
-	GPIO_FN_GPO2, GPIO_FN_STATUS0,
-	GPIO_FN_GPO3, GPIO_FN_STATUS1,
-	GPIO_FN_GPO4, GPIO_FN_STATUS2,
-	GPIO_FN_VINT,
-	GPIO_FN_TCKON,
-	GPIO_FN_XDVFS1,
-	GPIO_FN_MFG0_OUT1, GPIO_FN_PORT27_IROUT,
-	GPIO_FN_XDVFS2,
-	GPIO_FN_PORT28_TPU1TO1,
-	GPIO_FN_SIM_RST, GPIO_FN_PORT29_TPU1TO1,
-	GPIO_FN_SIM_CLK, GPIO_FN_PORT30_VIO_CKOR,
-	GPIO_FN_SIM_D, GPIO_FN_PORT31_IROUT,
-	GPIO_FN_XWUP,
-	GPIO_FN_VACK,
-	GPIO_FN_XTAL1L,
-	GPIO_FN_PORT49_IROUT,
-	GPIO_FN_BBIF2_TSYNC2, GPIO_FN_TPU2TO2,
-
-	GPIO_FN_BBIF2_TSCK2, GPIO_FN_TPU2TO3,
-	GPIO_FN_BBIF2_TXD2,
-	GPIO_FN_TPU3TO3,
-	GPIO_FN_TPU3TO2,
-	GPIO_FN_TPU0TO0,
-	GPIO_FN_A0, GPIO_FN_BS_,
-	GPIO_FN_A12, GPIO_FN_TPU4TO2,
-	GPIO_FN_A13, GPIO_FN_TPU0TO1,
-	GPIO_FN_A14,
-	GPIO_FN_A15,
-	GPIO_FN_A16, GPIO_FN_MSIOF0_SS1,
-	GPIO_FN_A17, GPIO_FN_MSIOF0_TSYNC,
-	GPIO_FN_A18, GPIO_FN_MSIOF0_TSCK,
-	GPIO_FN_A19, GPIO_FN_MSIOF0_TXD,
-	GPIO_FN_A20, GPIO_FN_MSIOF0_RSCK,
-	GPIO_FN_A21, GPIO_FN_MSIOF0_RSYNC,
-	GPIO_FN_A22, GPIO_FN_MSIOF0_MCK0,
-	GPIO_FN_A23, GPIO_FN_MSIOF0_MCK1,
-	GPIO_FN_A24, GPIO_FN_MSIOF0_RXD,
-	GPIO_FN_A25, GPIO_FN_MSIOF0_SS2,
-	GPIO_FN_A26,
-	GPIO_FN_FCE1_,
-	GPIO_FN_DACK0,
-	GPIO_FN_FCE0_,
-	GPIO_FN_WAIT_, GPIO_FN_DREQ0,
-	GPIO_FN_FRB,
-	GPIO_FN_CKO,
-	GPIO_FN_NBRSTOUT_,
-	GPIO_FN_NBRST_,
-	GPIO_FN_BBIF2_TXD,
-	GPIO_FN_BBIF2_RXD,
-	GPIO_FN_BBIF2_SYNC,
-	GPIO_FN_BBIF2_SCK,
-	GPIO_FN_MFG3_IN2,
-	GPIO_FN_MFG3_IN1,
-	GPIO_FN_BBIF1_SS2, GPIO_FN_MFG3_OUT1,
-	GPIO_FN_HSI_RX_DATA, GPIO_FN_BBIF1_RXD,
-	GPIO_FN_HSI_TX_WAKE, GPIO_FN_BBIF1_TSCK,
-	GPIO_FN_HSI_TX_DATA, GPIO_FN_BBIF1_TSYNC,
-	GPIO_FN_HSI_TX_READY, GPIO_FN_BBIF1_TXD,
-	GPIO_FN_HSI_RX_READY, GPIO_FN_BBIF1_RSCK,
-	GPIO_FN_HSI_RX_WAKE, GPIO_FN_BBIF1_RSYNC,
-	GPIO_FN_HSI_RX_FLAG, GPIO_FN_BBIF1_SS1, GPIO_FN_BBIF1_FLOW,
-	GPIO_FN_HSI_TX_FLAG,
-	GPIO_FN_VIO_VD, GPIO_FN_VIO2_VD,
-
-	GPIO_FN_VIO_HD,
-	GPIO_FN_VIO2_HD,
-	GPIO_FN_VIO_D0, GPIO_FN_PORT130_MSIOF2_RXD,
-	GPIO_FN_VIO_D1, GPIO_FN_PORT131_MSIOF2_SS1,
-	GPIO_FN_VIO_D2, GPIO_FN_PORT132_MSIOF2_SS2,
-	GPIO_FN_VIO_D3, GPIO_FN_MSIOF2_TSYNC,
-	GPIO_FN_VIO_D4, GPIO_FN_MSIOF2_TXD,
-	GPIO_FN_VIO_D5, GPIO_FN_MSIOF2_TSCK,
-	GPIO_FN_VIO_D6,
-	GPIO_FN_VIO_D7,
-	GPIO_FN_VIO_D8, GPIO_FN_VIO2_D0,
-	GPIO_FN_VIO_D9, GPIO_FN_VIO2_D1,
-	GPIO_FN_VIO_D10, GPIO_FN_TPU0TO2, GPIO_FN_VIO2_D2,
-	GPIO_FN_VIO_D11, GPIO_FN_TPU0TO3, GPIO_FN_VIO2_D3,
-	GPIO_FN_VIO_D12, GPIO_FN_VIO2_D4,
-	GPIO_FN_VIO_D13,
-	GPIO_FN_VIO2_D5,
-	GPIO_FN_VIO_D14, GPIO_FN_VIO2_D6,
-	GPIO_FN_VIO_D15, GPIO_FN_TPU1TO3,
-	GPIO_FN_VIO2_D7,
-	GPIO_FN_VIO_CLK,
-	GPIO_FN_VIO2_CLK,
-	GPIO_FN_VIO_FIELD, GPIO_FN_VIO2_FIELD,
-	GPIO_FN_VIO_CKO,
-	GPIO_FN_A27, GPIO_FN_MFG0_IN1,
-	GPIO_FN_MFG0_IN2,
-	GPIO_FN_TS_SPSYNC3, GPIO_FN_MSIOF2_RSCK,
-	GPIO_FN_TS_SDAT3, GPIO_FN_MSIOF2_RSYNC,
-	GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT153_MSIOF2_SS1,
-	GPIO_FN_MSIOF2_MCK0,
-	GPIO_FN_MSIOF2_MCK1,
-	GPIO_FN_PORT156_MSIOF2_SS2,
-	GPIO_FN_PORT157_MSIOF2_RXD,
-	GPIO_FN_DINT_, GPIO_FN_TS_SCK3,
-	GPIO_FN_NMI,
-	GPIO_FN_TPU3TO0,
-	GPIO_FN_BBIF2_TSYNC1,
-	GPIO_FN_BBIF2_TSCK1,
-	GPIO_FN_BBIF2_TXD1,
-	GPIO_FN_MFG2_OUT2,
-	GPIO_FN_TPU2TO1,
-	GPIO_FN_TPU4TO1, GPIO_FN_MFG4_OUT2,
-	GPIO_FN_D16,
-	GPIO_FN_D17,
-	GPIO_FN_D18,
-	GPIO_FN_D19,
-	GPIO_FN_D20,
-	GPIO_FN_D21,
-	GPIO_FN_D22,
-	GPIO_FN_PORT207_MSIOF0L_SS1, GPIO_FN_D23,
-	GPIO_FN_PORT208_MSIOF0L_SS2, GPIO_FN_D24,
-	GPIO_FN_D25,
-	GPIO_FN_DREQ2, GPIO_FN_PORT210_MSIOF0L_SS1, GPIO_FN_D26,
-	GPIO_FN_PORT211_MSIOF0L_SS2, GPIO_FN_D27,
-	GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0, GPIO_FN_D28,
-	GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1, GPIO_FN_D29,
-	GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_RSCK, GPIO_FN_D30,
-	GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_RSYNC, GPIO_FN_D31,
-	GPIO_FN_DACK2,
-	GPIO_FN_MSIOF0L_TSYNC, GPIO_FN_VIO2_FIELD3,
-	GPIO_FN_DACK3,
-	GPIO_FN_PORT218_VIO_CKOR,
-	GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_TSCK, GPIO_FN_VIO2_CLK3, \
-	GPIO_FN_DREQ1,
-	GPIO_FN_PWEN, GPIO_FN_MSIOF0L_RXD, GPIO_FN_VIO2_HD3, \
-	GPIO_FN_DACK1, GPIO_FN_OVCN,
-	GPIO_FN_MSIOF0L_TXD, GPIO_FN_VIO2_VD3,
-
-	GPIO_FN_OVCN2,
-	GPIO_FN_EXTLP, GPIO_FN_PORT226_VIO_CKO2,
-	GPIO_FN_IDIN,
-	GPIO_FN_MFG1_IN1,
-	GPIO_FN_MSIOF1_TXD,
-	GPIO_FN_MSIOF1_TSYNC,
-	GPIO_FN_MSIOF1_TSCK,
-	GPIO_FN_MSIOF1_RXD,
-	GPIO_FN_MSIOF1_RSCK, GPIO_FN_VIO2_CLK2,
-	GPIO_FN_MSIOF1_RSYNC, GPIO_FN_MFG1_IN2, GPIO_FN_VIO2_VD2, \
-	GPIO_FN_MSIOF1_MCK0,
-	GPIO_FN_MSIOF1_MCK1,
-	GPIO_FN_MSIOF1_SS1, GPIO_FN_VIO2_FIELD2,
-	GPIO_FN_MSIOF1_SS2, GPIO_FN_VIO2_HD2,
-	GPIO_FN_PORT241_IROUT, GPIO_FN_MFG4_OUT1, \
-	GPIO_FN_TPU4TO0,
-	GPIO_FN_MFG4_IN2,
-	GPIO_FN_PORT243_VIO_CKO2,
-	GPIO_FN_MFG2_IN1,
-	GPIO_FN_MSIOF2R_RXD,
-	GPIO_FN_MFG2_IN2,
-	GPIO_FN_MSIOF2R_TXD,
-	GPIO_FN_MFG1_OUT1,
-	GPIO_FN_TPU1TO0,
-	GPIO_FN_MFG3_OUT2,
-	GPIO_FN_TPU3TO1,
-	GPIO_FN_MFG2_OUT1,
-	GPIO_FN_TPU2TO0,
-	GPIO_FN_MSIOF2R_TSCK,
-	GPIO_FN_PORT249_IROUT, GPIO_FN_MFG4_IN1, \
-	GPIO_FN_MSIOF2R_TSYNC,
-	GPIO_FN_SDHICLK0,
-	GPIO_FN_SDHICD0,
-	GPIO_FN_SDHID0_0,
-	GPIO_FN_SDHID0_1,
-	GPIO_FN_SDHID0_2,
-	GPIO_FN_SDHID0_3,
-	GPIO_FN_SDHICMD0,
-	GPIO_FN_SDHIWP0,
-	GPIO_FN_SDHICLK1,
-	GPIO_FN_SDHID1_0, GPIO_FN_TS_SPSYNC2,
-	GPIO_FN_SDHID1_1, GPIO_FN_TS_SDAT2,
-	GPIO_FN_SDHID1_2, GPIO_FN_TS_SDEN2,
-	GPIO_FN_SDHID1_3, GPIO_FN_TS_SCK2,
-	GPIO_FN_SDHICMD1,
-	GPIO_FN_SDHICLK2,
-	GPIO_FN_SDHID2_0, GPIO_FN_TS_SPSYNC4,
-	GPIO_FN_SDHID2_1, GPIO_FN_TS_SDAT4,
-	GPIO_FN_SDHID2_2, GPIO_FN_TS_SDEN4,
-	GPIO_FN_SDHID2_3, GPIO_FN_TS_SCK4,
-	GPIO_FN_SDHICMD2,
-	GPIO_FN_MMCCLK0,
-	GPIO_FN_MMCD0_0,
-	GPIO_FN_MMCD0_1,
-	GPIO_FN_MMCD0_2,
-	GPIO_FN_MMCD0_3,
-	GPIO_FN_MMCD0_4, GPIO_FN_TS_SPSYNC5,
-	GPIO_FN_MMCD0_5, GPIO_FN_TS_SDAT5,
-	GPIO_FN_MMCD0_6, GPIO_FN_TS_SDEN5,
-	GPIO_FN_MMCD0_7, GPIO_FN_TS_SCK5,
-	GPIO_FN_MMCCMD0,
-	GPIO_FN_RESETOUTS_, GPIO_FN_EXTAL2OUT,
-	GPIO_FN_MCP_WAIT__MCP_FRB,
-	GPIO_FN_MCP_CKO, GPIO_FN_MMCCLK1,
-	GPIO_FN_MCP_D15_MCP_NAF15,
-	GPIO_FN_MCP_D14_MCP_NAF14,
-	GPIO_FN_MCP_D13_MCP_NAF13,
-	GPIO_FN_MCP_D12_MCP_NAF12,
-	GPIO_FN_MCP_D11_MCP_NAF11,
-	GPIO_FN_MCP_D10_MCP_NAF10,
-	GPIO_FN_MCP_D9_MCP_NAF9,
-	GPIO_FN_MCP_D8_MCP_NAF8, GPIO_FN_MMCCMD1,
-	GPIO_FN_MCP_D7_MCP_NAF7, GPIO_FN_MMCD1_7,
-
-	GPIO_FN_MCP_D6_MCP_NAF6, GPIO_FN_MMCD1_6,
-	GPIO_FN_MCP_D5_MCP_NAF5, GPIO_FN_MMCD1_5,
-	GPIO_FN_MCP_D4_MCP_NAF4, GPIO_FN_MMCD1_4,
-	GPIO_FN_MCP_D3_MCP_NAF3, GPIO_FN_MMCD1_3,
-	GPIO_FN_MCP_D2_MCP_NAF2, GPIO_FN_MMCD1_2,
-	GPIO_FN_MCP_D1_MCP_NAF1, GPIO_FN_MMCD1_1,
-	GPIO_FN_MCP_D0_MCP_NAF0, GPIO_FN_MMCD1_0,
-	GPIO_FN_MCP_NBRSTOUT_,
-	GPIO_FN_MCP_WE0__MCP_FWE, GPIO_FN_MCP_RDWR_MCP_FWE,
-
-	/* MSEL2 special case */
-	GPIO_FN_TSIF2_TS_XX1,
-	GPIO_FN_TSIF2_TS_XX2,
-	GPIO_FN_TSIF2_TS_XX3,
-	GPIO_FN_TSIF2_TS_XX4,
-	GPIO_FN_TSIF2_TS_XX5,
-	GPIO_FN_TSIF1_TS_XX1,
-	GPIO_FN_TSIF1_TS_XX2,
-	GPIO_FN_TSIF1_TS_XX3,
-	GPIO_FN_TSIF1_TS_XX4,
-	GPIO_FN_TSIF1_TS_XX5,
-	GPIO_FN_TSIF0_TS_XX1,
-	GPIO_FN_TSIF0_TS_XX2,
-	GPIO_FN_TSIF0_TS_XX3,
-	GPIO_FN_TSIF0_TS_XX4,
-	GPIO_FN_TSIF0_TS_XX5,
-	GPIO_FN_MST1_TS_XX1,
-	GPIO_FN_MST1_TS_XX2,
-	GPIO_FN_MST1_TS_XX3,
-	GPIO_FN_MST1_TS_XX4,
-	GPIO_FN_MST1_TS_XX5,
-	GPIO_FN_MST0_TS_XX1,
-	GPIO_FN_MST0_TS_XX2,
-	GPIO_FN_MST0_TS_XX3,
-	GPIO_FN_MST0_TS_XX4,
-	GPIO_FN_MST0_TS_XX5,
-
-	/* MSEL3 special cases */
-	GPIO_FN_SDHI0_VCCQ_MC0_ON,
-	GPIO_FN_SDHI0_VCCQ_MC0_OFF,
-	GPIO_FN_DEBUG_MON_VIO,
-	GPIO_FN_DEBUG_MON_LCDD,
-	GPIO_FN_LCDC_LCDC0,
-	GPIO_FN_LCDC_LCDC1,
-
-	/* MSEL4 special cases */
-	GPIO_FN_IRQ9_MEM_INT,
-	GPIO_FN_IRQ9_MCP_INT,
-	GPIO_FN_A11,
-	GPIO_FN_TPU4TO3,
-	GPIO_FN_RESETA_N_PU_ON,
-	GPIO_FN_RESETA_N_PU_OFF,
-	GPIO_FN_EDBGREQ_PD,
-	GPIO_FN_EDBGREQ_PU,
-
-	/* end of GPIO */
-	GPIO_NR,
-};
-
 /* DMA slave IDs */
 enum {
 	SHDMA_SLAVE_INVALID,
diff --git a/arch/arm/mach-shmobile/include/mach/zboot.h b/arch/arm/mach-shmobile/include/mach/zboot.h
index f2d8744..c3c4669 100644
--- a/arch/arm/mach-shmobile/include/mach/zboot.h
+++ b/arch/arm/mach-shmobile/include/mach/zboot.h
@@ -1,7 +1,6 @@
 #ifndef ZBOOT_H
 #define ZBOOT_H
 
-#include <asm/mach-types.h>
 #include <mach/zboot_macros.h>
 
 /**************************************************
@@ -11,7 +10,6 @@
  **************************************************/
 
 #ifdef CONFIG_MACH_MACKEREL
-#define MACH_TYPE	MACH_TYPE_MACKEREL
 #define MEMORY_START	0x40000000
 #include "mach/head-mackerel.txt"
 #else
diff --git a/arch/arm/mach-shmobile/intc-r8a7740.c b/arch/arm/mach-shmobile/intc-r8a7740.c
deleted file mode 100644
index 8871f77..0000000
--- a/arch/arm/mach-shmobile/intc-r8a7740.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * R8A7740 processor support
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irqchip.h>
-#include <linux/irqchip/arm-gic.h>
-
-static void __init r8a7740_init_irq_common(void)
-{
-	void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10);
-	void __iomem *intc_msk_base = ioremap_nocache(0xe6900040, 0x10);
-	void __iomem *pfc_inta_ctrl = ioremap_nocache(0xe605807c, 0x4);
-
-	/* route signals to GIC */
-	iowrite32(0x0, pfc_inta_ctrl);
-
-	/*
-	 * To mask the shared interrupt to SPI 149 we must ensure to set
-	 * PRIO *and* MASK. Else we run into IRQ floods when registering
-	 * the intc_irqpin devices
-	 */
-	iowrite32(0x0, intc_prio_base + 0x0);
-	iowrite32(0x0, intc_prio_base + 0x4);
-	iowrite32(0x0, intc_prio_base + 0x8);
-	iowrite32(0x0, intc_prio_base + 0xc);
-	iowrite8(0xff, intc_msk_base + 0x0);
-	iowrite8(0xff, intc_msk_base + 0x4);
-	iowrite8(0xff, intc_msk_base + 0x8);
-	iowrite8(0xff, intc_msk_base + 0xc);
-
-	iounmap(intc_prio_base);
-	iounmap(intc_msk_base);
-	iounmap(pfc_inta_ctrl);
-}
-
-void __init r8a7740_init_irq_of(void)
-{
-	irqchip_init();
-	r8a7740_init_irq_common();
-}
-
-void __init r8a7740_init_irq(void)
-{
-	void __iomem *gic_dist_base = ioremap_nocache(0xc2800000, 0x1000);
-	void __iomem *gic_cpu_base = ioremap_nocache(0xc2000000, 0x1000);
-
-	/* initialize the Generic Interrupt Controller PL390 r0p0 */
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-	r8a7740_init_irq_common();
-}
diff --git a/arch/arm/mach-shmobile/intc-r8a7779.c b/arch/arm/mach-shmobile/intc-r8a7779.c
deleted file mode 100644
index b86dc89..0000000
--- a/arch/arm/mach-shmobile/intc-r8a7779.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * r8a7779 processor support - INTC hardware block
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/irq-renesas-intc-irqpin.h>
-#include <linux/irqchip.h>
-#include <mach/common.h>
-#include <mach/intc.h>
-#include <mach/irqs.h>
-#include <mach/r8a7779.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#define INT2SMSKCR0 IOMEM(0xfe7822a0)
-#define INT2SMSKCR1 IOMEM(0xfe7822a4)
-#define INT2SMSKCR2 IOMEM(0xfe7822a8)
-#define INT2SMSKCR3 IOMEM(0xfe7822ac)
-#define INT2SMSKCR4 IOMEM(0xfe7822b0)
-
-#define INT2NTSR0 IOMEM(0xfe700060)
-#define INT2NTSR1 IOMEM(0xfe700064)
-
-static struct renesas_intc_irqpin_config irqpin0_platform_data = {
-	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
-	.sense_bitfield_width = 2,
-};
-
-static struct resource irqpin0_resources[] = {
-	DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */
-	DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */
-	DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */
-	DEFINE_RES_MEM(0xfe780044, 4), /* INTMSK0 */
-	DEFINE_RES_MEM(0xfe780064, 4), /* INTMSKCLR0 */
-	DEFINE_RES_IRQ(gic_spi(27)), /* IRQ0 */
-	DEFINE_RES_IRQ(gic_spi(28)), /* IRQ1 */
-	DEFINE_RES_IRQ(gic_spi(29)), /* IRQ2 */
-	DEFINE_RES_IRQ(gic_spi(30)), /* IRQ3 */
-};
-
-static struct platform_device irqpin0_device = {
-	.name		= "renesas_intc_irqpin",
-	.id		= 0,
-	.resource	= irqpin0_resources,
-	.num_resources	= ARRAY_SIZE(irqpin0_resources),
-	.dev		= {
-		.platform_data	= &irqpin0_platform_data,
-	},
-};
-
-void __init r8a7779_init_irq_extpin(int irlm)
-{
-	void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE);
-	unsigned long tmp;
-
-	if (icr0) {
-		tmp = ioread32(icr0);
-		if (irlm)
-			tmp |= 1 << 23; /* IRQ0 -> IRQ3 as individual pins */
-		else
-			tmp &= ~(1 << 23); /* IRL mode - not supported */
-		tmp |= (1 << 21); /* LVLMODE = 1 */
-		iowrite32(tmp, icr0);
-		iounmap(icr0);
-
-		if (irlm)
-			platform_device_register(&irqpin0_device);
-	} else
-		pr_warn("r8a7779: unable to setup external irq pin mode\n");
-}
-
-static int r8a7779_set_wake(struct irq_data *data, unsigned int on)
-{
-	return 0; /* always allow wakeup */
-}
-
-static void __init r8a7779_init_irq_common(void)
-{
-	gic_arch_extn.irq_set_wake = r8a7779_set_wake;
-
-	/* route all interrupts to ARM */
-	__raw_writel(0xffffffff, INT2NTSR0);
-	__raw_writel(0x3fffffff, INT2NTSR1);
-
-	/* unmask all known interrupts in INTCS2 */
-	__raw_writel(0xfffffff0, INT2SMSKCR0);
-	__raw_writel(0xfff7ffff, INT2SMSKCR1);
-	__raw_writel(0xfffbffdf, INT2SMSKCR2);
-	__raw_writel(0xbffffffc, INT2SMSKCR3);
-	__raw_writel(0x003fee3f, INT2SMSKCR4);
-}
-
-void __init r8a7779_init_irq(void)
-{
-	void __iomem *gic_dist_base = IOMEM(0xf0001000);
-	void __iomem *gic_cpu_base = IOMEM(0xf0000100);
-
-	/* use GIC to handle interrupts */
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-
-	r8a7779_init_irq_common();
-}
-
-#ifdef CONFIG_OF
-void __init r8a7779_init_irq_dt(void)
-{
-	irqchip_init();
-	r8a7779_init_irq_common();
-}
-#endif
diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c
new file mode 100644
index 0000000..1da5a72
--- /dev/null
+++ b/arch/arm/mach-shmobile/platsmp-apmu.c
@@ -0,0 +1,195 @@
+/*
+ * SMP support for SoCs with APMU
+ *
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/of_address.h>
+#include <linux/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
+#include <asm/smp_plat.h>
+#include <mach/common.h>
+
+static struct {
+	void __iomem *iomem;
+	int bit;
+} apmu_cpus[CONFIG_NR_CPUS];
+
+#define WUPCR_OFFS 0x10
+#define PSTR_OFFS 0x40
+#define CPUNCR_OFFS(n) (0x100 + (0x10 * (n)))
+
+static int apmu_power_on(void __iomem *p, int bit)
+{
+	/* request power on */
+	writel_relaxed(BIT(bit), p + WUPCR_OFFS);
+
+	/* wait for APMU to finish */
+	while (readl_relaxed(p + WUPCR_OFFS) != 0)
+		;
+
+	return 0;
+}
+
+static int apmu_power_off(void __iomem *p, int bit)
+{
+	/* request Core Standby for next WFI */
+	writel_relaxed(3, p + CPUNCR_OFFS(bit));
+	return 0;
+}
+
+static int apmu_power_off_poll(void __iomem *p, int bit)
+{
+	int k;
+
+	for (k = 0; k < 1000; k++) {
+		if (((readl_relaxed(p + PSTR_OFFS) >> (bit * 4)) & 0x03) == 3)
+			return 1;
+
+		mdelay(1);
+	}
+
+	return 0;
+}
+
+static int apmu_wrap(int cpu, int (*fn)(void __iomem *p, int cpu))
+{
+	void __iomem *p = apmu_cpus[cpu].iomem;
+
+	return p ? fn(p, apmu_cpus[cpu].bit) : -EINVAL;
+}
+
+static void apmu_init_cpu(struct resource *res, int cpu, int bit)
+{
+	if (apmu_cpus[cpu].iomem)
+		return;
+
+	apmu_cpus[cpu].iomem = ioremap_nocache(res->start, resource_size(res));
+	apmu_cpus[cpu].bit = bit;
+
+	pr_debug("apmu ioremap %d %d 0x%08x 0x%08x\n", cpu, bit,
+		 res->start, resource_size(res));
+}
+
+static struct {
+	struct resource iomem;
+	int cpus[4];
+} apmu_config[] = {
+	{
+		.iomem = DEFINE_RES_MEM(0xe6152000, 0x88),
+		.cpus = { 0, 1, 2, 3 },
+	},
+	{
+		.iomem = DEFINE_RES_MEM(0xe6151000, 0x88),
+		.cpus = { 0x100, 0x101, 0x102, 0x103 },
+	}
+};
+
+static void apmu_parse_cfg(void (*fn)(struct resource *res, int cpu, int bit))
+{
+	u32 id;
+	int k;
+	int bit, index;
+	bool is_allowed;
+
+	for (k = 0; k < ARRAY_SIZE(apmu_config); k++) {
+		/* only enable the cluster that includes the boot CPU */
+		is_allowed = false;
+		for (bit = 0; bit < ARRAY_SIZE(apmu_config[k].cpus); bit++) {
+			id = apmu_config[k].cpus[bit];
+			if (id >= 0) {
+				if (id == cpu_logical_map(0))
+					is_allowed = true;
+			}
+		}
+		if (!is_allowed)
+			continue;
+
+		for (bit = 0; bit < ARRAY_SIZE(apmu_config[k].cpus); bit++) {
+			id = apmu_config[k].cpus[bit];
+			if (id >= 0) {
+				index = get_logical_index(id);
+				if (index >= 0)
+					fn(&apmu_config[k].iomem, index, bit);
+			}
+		}
+	}
+}
+
+void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus)
+{
+	/* install boot code shared by all CPUs */
+	shmobile_boot_fn = virt_to_phys(shmobile_smp_boot);
+	shmobile_boot_arg = MPIDR_HWID_BITMASK;
+
+	/* perform per-cpu setup */
+	apmu_parse_cfg(apmu_init_cpu);
+}
+
+int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	/* For this particular CPU register boot vector */
+	shmobile_smp_hook(cpu, virt_to_phys(shmobile_invalidate_start), 0);
+
+	return apmu_wrap(cpu, apmu_power_on);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+/* nicked from arch/arm/mach-exynos/hotplug.c */
+static inline void cpu_enter_lowpower_a15(void)
+{
+	unsigned int v;
+
+	asm volatile(
+	"       mrc     p15, 0, %0, c1, c0, 0\n"
+	"       bic     %0, %0, %1\n"
+	"       mcr     p15, 0, %0, c1, c0, 0\n"
+		: "=&r" (v)
+		: "Ir" (CR_C)
+		: "cc");
+
+	flush_cache_louis();
+
+	asm volatile(
+	/*
+	 * Turn off coherency
+	 */
+	"       mrc     p15, 0, %0, c1, c0, 1\n"
+	"       bic     %0, %0, %1\n"
+	"       mcr     p15, 0, %0, c1, c0, 1\n"
+		: "=&r" (v)
+		: "Ir" (0x40)
+		: "cc");
+
+	isb();
+	dsb();
+}
+
+void shmobile_smp_apmu_cpu_die(unsigned int cpu)
+{
+	/* For this particular CPU deregister boot vector */
+	shmobile_smp_hook(cpu, 0, 0);
+
+	/* Select next sleep mode using the APMU */
+	apmu_wrap(cpu, apmu_power_off);
+
+	/* Do ARM specific CPU shutdown */
+	cpu_enter_lowpower_a15();
+
+	/* jump to shared mach-shmobile sleep / reset code */
+	shmobile_smp_sleep();
+}
+
+int shmobile_smp_apmu_cpu_kill(unsigned int cpu)
+{
+	return apmu_wrap(cpu, apmu_power_off_poll);
+}
+#endif
diff --git a/arch/arm/mach-shmobile/platsmp-scu.c b/arch/arm/mach-shmobile/platsmp-scu.c
new file mode 100644
index 0000000..673ad6e
--- /dev/null
+++ b/arch/arm/mach-shmobile/platsmp-scu.c
@@ -0,0 +1,97 @@
+/*
+ * SMP support for SoCs with SCU covered by mach-shmobile
+ *
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/cpu.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
+#include <asm/smp_scu.h>
+#include <mach/common.h>
+
+static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb,
+					  unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (long)hcpu;
+
+	switch (action) {
+	case CPU_UP_PREPARE:
+		/* For this particular CPU register SCU SMP boot vector */
+		shmobile_smp_hook(cpu, virt_to_phys(shmobile_boot_scu),
+				  (unsigned long)shmobile_scu_base);
+		break;
+	};
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block shmobile_smp_scu_notifier = {
+	.notifier_call = shmobile_smp_scu_notifier_call,
+};
+
+void __init shmobile_smp_scu_prepare_cpus(unsigned int max_cpus)
+{
+	/* install boot code shared by all CPUs */
+	shmobile_boot_fn = virt_to_phys(shmobile_smp_boot);
+	shmobile_boot_arg = MPIDR_HWID_BITMASK;
+
+	/* enable SCU and cache coherency on booting CPU */
+	scu_enable(shmobile_scu_base);
+	scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
+
+	/* Use CPU notifier for reset vector control */
+	register_cpu_notifier(&shmobile_smp_scu_notifier);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+void shmobile_smp_scu_cpu_die(unsigned int cpu)
+{
+	/* For this particular CPU deregister boot vector */
+	shmobile_smp_hook(cpu, 0, 0);
+
+	dsb();
+	flush_cache_all();
+
+	/* disable cache coherency */
+	scu_power_mode(shmobile_scu_base, SCU_PM_POWEROFF);
+
+	/* jump to shared mach-shmobile sleep / reset code */
+	shmobile_smp_sleep();
+}
+
+static int shmobile_smp_scu_psr_core_disabled(int cpu)
+{
+	unsigned long mask = SCU_PM_POWEROFF << (cpu * 8);
+
+	if ((__raw_readl(shmobile_scu_base + 8) & mask) == mask)
+		return 1;
+
+	return 0;
+}
+
+int shmobile_smp_scu_cpu_kill(unsigned int cpu)
+{
+	int k;
+
+	/* this function is running on another CPU than the offline target,
+	 * here we need wait for shutdown code in platform_cpu_die() to
+	 * finish before asking SoC-specific code to power off the CPU core.
+	 */
+	for (k = 0; k < 1000; k++) {
+		if (shmobile_smp_scu_psr_core_disabled(cpu))
+			return 1;
+
+		mdelay(1);
+	}
+
+	return 0;
+}
+#endif
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index 1f958d7..9ebc246 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -11,18 +11,28 @@
  * published by the Free Software Foundation.
  */
 #include <linux/init.h>
-#include <linux/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
+#include <mach/common.h>
 
-void __init shmobile_smp_init_cpus(unsigned int ncores)
+extern unsigned long shmobile_smp_fn[];
+extern unsigned long shmobile_smp_arg[];
+extern unsigned long shmobile_smp_mpidr[];
+
+void shmobile_smp_hook(unsigned int cpu, unsigned long fn, unsigned long arg)
 {
-	unsigned int i;
+	shmobile_smp_fn[cpu] = 0;
+	flush_cache_all();
 
-	if (ncores > nr_cpu_ids) {
-		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
-			ncores, nr_cpu_ids);
-		ncores = nr_cpu_ids;
-	}
+	shmobile_smp_mpidr[cpu] = cpu_logical_map(cpu);
+	shmobile_smp_fn[cpu] = fn;
+	shmobile_smp_arg[cpu] = arg;
+	flush_cache_all();
+}
 
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
+#ifdef CONFIG_HOTPLUG_CPU
+int shmobile_smp_cpu_disable(unsigned int cpu)
+{
+	return 0; /* Hotplug of any CPU is supported */
 }
+#endif
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index 1ccddd2..3ad531c 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -20,7 +20,6 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/irqchip.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/gpio-em.h>
 #include <linux/of_platform.h>
@@ -28,7 +27,6 @@
 #include <linux/input.h>
 #include <linux/io.h>
 #include <linux/irqchip/arm-gic.h>
-#include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/emev2.h>
 #include <mach/irqs.h>
@@ -39,13 +37,6 @@
 
 static struct map_desc emev2_io_desc[] __initdata = {
 #ifdef CONFIG_SMP
-	/* 128K entity map for 0xe0100000 (SMU) */
-	{
-		.virtual	= 0xe0100000,
-		.pfn		= __phys_to_pfn(0xe0100000),
-		.length		= SZ_128K,
-		.type		= MT_DEVICE
-	},
 	/* 2M mapping for SCU + L2 controller */
 	{
 		.virtual	= 0xf0000000,
@@ -63,102 +54,40 @@ void __init emev2_map_io(void)
 
 /* UART */
 static struct resource uart0_resources[] = {
-	[0]	= {
-		.start	= 0xe1020000,
-		.end	= 0xe1020037,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1]	= {
-		.start	= 40,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device uart0_device = {
-	.name		= "serial8250-em",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(uart0_resources),
-	.resource	= uart0_resources,
+	DEFINE_RES_MEM(0xe1020000, 0x38),
+	DEFINE_RES_IRQ(40),
 };
 
 static struct resource uart1_resources[] = {
-	[0]	= {
-		.start	= 0xe1030000,
-		.end	= 0xe1030037,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1]	= {
-		.start	= 41,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device uart1_device = {
-	.name		= "serial8250-em",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(uart1_resources),
-	.resource	= uart1_resources,
+	DEFINE_RES_MEM(0xe1030000, 0x38),
+	DEFINE_RES_IRQ(41),
 };
 
 static struct resource uart2_resources[] = {
-	[0]	= {
-		.start	= 0xe1040000,
-		.end	= 0xe1040037,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1]	= {
-		.start	= 42,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device uart2_device = {
-	.name		= "serial8250-em",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(uart2_resources),
-	.resource	= uart2_resources,
+	DEFINE_RES_MEM(0xe1040000, 0x38),
+	DEFINE_RES_IRQ(42),
 };
 
 static struct resource uart3_resources[] = {
-	[0]	= {
-		.start	= 0xe1050000,
-		.end	= 0xe1050037,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1]	= {
-		.start	= 43,
-		.flags	= IORESOURCE_IRQ,
-	}
+	DEFINE_RES_MEM(0xe1050000, 0x38),
+	DEFINE_RES_IRQ(43),
 };
 
-static struct platform_device uart3_device = {
-	.name		= "serial8250-em",
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(uart3_resources),
-	.resource	= uart3_resources,
-};
+#define emev2_register_uart(idx)					\
+	platform_device_register_simple("serial8250-em", idx,		\
+					uart##idx##_resources,		\
+					ARRAY_SIZE(uart##idx##_resources))
 
 /* STI */
 static struct resource sti_resources[] = {
-	[0] = {
-		.name	= "STI",
-		.start	= 0xe0180000,
-		.end	= 0xe0180053,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 157,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sti_device = {
-	.name		= "em_sti",
-	.id		= 0,
-	.resource	= sti_resources,
-	.num_resources	= ARRAY_SIZE(sti_resources),
+	DEFINE_RES_MEM(0xe0180000, 0x54),
+	DEFINE_RES_IRQ(157),
 };
 
+#define emev2_register_sti()					\
+	platform_device_register_simple("em_sti", 0,		\
+					sti_resources,		\
+					ARRAY_SIZE(sti_resources))
 
 /* GIO */
 static struct gpio_em_config gio0_config = {
@@ -168,36 +97,10 @@ static struct gpio_em_config gio0_config = {
 };
 
 static struct resource gio0_resources[] = {
-	[0] = {
-		.name	= "GIO_000",
-		.start	= 0xe0050000,
-		.end	= 0xe005002b,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "GIO_000",
-		.start	= 0xe0050040,
-		.end	= 0xe005005f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= 99,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= 100,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device gio0_device = {
-	.name		= "em_gio",
-	.id		= 0,
-	.resource	= gio0_resources,
-	.num_resources	= ARRAY_SIZE(gio0_resources),
-	.dev		= {
-		.platform_data	= &gio0_config,
-	},
+	DEFINE_RES_MEM(0xe0050000, 0x2c),
+	DEFINE_RES_MEM(0xe0050040, 0x20),
+	DEFINE_RES_IRQ(99),
+	DEFINE_RES_IRQ(100),
 };
 
 static struct gpio_em_config gio1_config = {
@@ -207,36 +110,10 @@ static struct gpio_em_config gio1_config = {
 };
 
 static struct resource gio1_resources[] = {
-	[0] = {
-		.name	= "GIO_032",
-		.start	= 0xe0050080,
-		.end	= 0xe00500ab,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "GIO_032",
-		.start	= 0xe00500c0,
-		.end	= 0xe00500df,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= 101,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= 102,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device gio1_device = {
-	.name		= "em_gio",
-	.id		= 1,
-	.resource	= gio1_resources,
-	.num_resources	= ARRAY_SIZE(gio1_resources),
-	.dev		= {
-		.platform_data	= &gio1_config,
-	},
+	DEFINE_RES_MEM(0xe0050080, 0x2c),
+	DEFINE_RES_MEM(0xe00500c0, 0x20),
+	DEFINE_RES_IRQ(101),
+	DEFINE_RES_IRQ(102),
 };
 
 static struct gpio_em_config gio2_config = {
@@ -246,36 +123,10 @@ static struct gpio_em_config gio2_config = {
 };
 
 static struct resource gio2_resources[] = {
-	[0] = {
-		.name	= "GIO_064",
-		.start	= 0xe0050100,
-		.end	= 0xe005012b,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "GIO_064",
-		.start	= 0xe0050140,
-		.end	= 0xe005015f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= 103,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= 104,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device gio2_device = {
-	.name		= "em_gio",
-	.id		= 2,
-	.resource	= gio2_resources,
-	.num_resources	= ARRAY_SIZE(gio2_resources),
-	.dev		= {
-		.platform_data	= &gio2_config,
-	},
+	DEFINE_RES_MEM(0xe0050100, 0x2c),
+	DEFINE_RES_MEM(0xe0050140, 0x20),
+	DEFINE_RES_IRQ(103),
+	DEFINE_RES_IRQ(104),
 };
 
 static struct gpio_em_config gio3_config = {
@@ -285,36 +136,10 @@ static struct gpio_em_config gio3_config = {
 };
 
 static struct resource gio3_resources[] = {
-	[0] = {
-		.name	= "GIO_096",
-		.start	= 0xe0050180,
-		.end	= 0xe00501ab,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "GIO_096",
-		.start	= 0xe00501c0,
-		.end	= 0xe00501df,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= 105,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= 106,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device gio3_device = {
-	.name		= "em_gio",
-	.id		= 3,
-	.resource	= gio3_resources,
-	.num_resources	= ARRAY_SIZE(gio3_resources),
-	.dev		= {
-		.platform_data	= &gio3_config,
-	},
+	DEFINE_RES_MEM(0xe0050180, 0x2c),
+	DEFINE_RES_MEM(0xe00501c0, 0x20),
+	DEFINE_RES_IRQ(105),
+	DEFINE_RES_IRQ(106),
 };
 
 static struct gpio_em_config gio4_config = {
@@ -324,126 +149,53 @@ static struct gpio_em_config gio4_config = {
 };
 
 static struct resource gio4_resources[] = {
-	[0] = {
-		.name	= "GIO_128",
-		.start	= 0xe0050200,
-		.end	= 0xe005022b,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "GIO_128",
-		.start	= 0xe0050240,
-		.end	= 0xe005025f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= 107,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= 108,
-		.flags	= IORESOURCE_IRQ,
-	},
+	DEFINE_RES_MEM(0xe0050200, 0x2c),
+	DEFINE_RES_MEM(0xe0050240, 0x20),
+	DEFINE_RES_IRQ(107),
+	DEFINE_RES_IRQ(108),
 };
 
-static struct platform_device gio4_device = {
-	.name		= "em_gio",
-	.id		= 4,
-	.resource	= gio4_resources,
-	.num_resources	= ARRAY_SIZE(gio4_resources),
-	.dev		= {
-		.platform_data	= &gio4_config,
-	},
-};
+#define emev2_register_gio(idx)						\
+	platform_device_register_resndata(&platform_bus, "em_gio",	\
+					  idx, gio##idx##_resources,	\
+					  ARRAY_SIZE(gio##idx##_resources), \
+					  &gio##idx##_config,		\
+					  sizeof(struct gpio_em_config))
 
 static struct resource pmu_resources[] = {
-	[0] = {
-		.start	= 152,
-		.end	= 152,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= 153,
-		.end	= 153,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device pmu_device = {
-	.name		= "arm-pmu",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pmu_resources),
-	.resource	= pmu_resources,
+	DEFINE_RES_IRQ(152),
+	DEFINE_RES_IRQ(153),
 };
 
-static struct platform_device *emev2_early_devices[] __initdata = {
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&uart3_device,
-};
-
-static struct platform_device *emev2_late_devices[] __initdata = {
-	&sti_device,
-	&gio0_device,
-	&gio1_device,
-	&gio2_device,
-	&gio3_device,
-	&gio4_device,
-	&pmu_device,
-};
+#define emev2_register_pmu()					\
+	platform_device_register_simple("arm-pmu", -1,		\
+					pmu_resources,		\
+					ARRAY_SIZE(pmu_resources))
 
 void __init emev2_add_standard_devices(void)
 {
-	emev2_clock_init();
-
-	platform_add_devices(emev2_early_devices,
-			     ARRAY_SIZE(emev2_early_devices));
-
-	platform_add_devices(emev2_late_devices,
-			     ARRAY_SIZE(emev2_late_devices));
+	if (!IS_ENABLED(CONFIG_COMMON_CLK))
+		emev2_clock_init();
+
+	emev2_register_uart(0);
+	emev2_register_uart(1);
+	emev2_register_uart(2);
+	emev2_register_uart(3);
+	emev2_register_sti();
+	emev2_register_gio(0);
+	emev2_register_gio(1);
+	emev2_register_gio(2);
+	emev2_register_gio(3);
+	emev2_register_gio(4);
+	emev2_register_pmu();
 }
 
-static void __init emev2_init_delay(void)
+void __init emev2_init_delay(void)
 {
 	shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */
 }
 
-void __init emev2_add_early_devices(void)
-{
-	emev2_init_delay();
-
-	early_platform_add_devices(emev2_early_devices,
-				   ARRAY_SIZE(emev2_early_devices));
-
-	/* setup early console here as well */
-	shmobile_setup_console();
-}
-
-void __init emev2_init_irq(void)
-{
-	void __iomem *gic_dist_base;
-	void __iomem *gic_cpu_base;
-
-	/* Static mappings, never released */
-	gic_dist_base = ioremap(0xe0028000, PAGE_SIZE);
-	gic_cpu_base = ioremap(0xe0020000, PAGE_SIZE);
-	BUG_ON(!gic_dist_base || !gic_cpu_base);
-
-	/* Use GIC to handle interrupts */
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-}
-
 #ifdef CONFIG_USE_OF
-static const struct of_dev_auxdata emev2_auxdata_lookup[] __initconst = {
-	{ }
-};
-
-static void __init emev2_add_standard_devices_dt(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     emev2_auxdata_lookup, NULL);
-}
 
 static const char *emev2_boards_compat_dt[] __initdata = {
 	"renesas,emev2",
@@ -452,10 +204,8 @@ static const char *emev2_boards_compat_dt[] __initdata = {
 
 DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
 	.smp		= smp_ops(emev2_smp_ops),
+	.map_io		= emev2_map_io,
 	.init_early	= emev2_init_delay,
-	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= irqchip_init,
-	.init_machine	= emev2_add_standard_devices_dt,
 	.dt_compat	= emev2_boards_compat_dt,
 MACHINE_END
 
diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c
new file mode 100644
index 0000000..d4eb509
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-r7s72100.c
@@ -0,0 +1,88 @@
+/*
+ * r7s72100 processor support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <linux/serial_sci.h>
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/r7s72100.h>
+#include <asm/mach/arch.h>
+
+#define SCIF_DATA(index, baseaddr, irq)					\
+[index] = {								\
+	.type		= PORT_SCIF,					\
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,		\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,		\
+	.scbrr_algo_id	= SCBRR_ALGO_2,					\
+	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |	\
+			  SCSCR_REIE,					\
+	.mapbase	= baseaddr,					\
+	.irqs		= { irq + 1, irq + 2, irq + 3, irq },		\
+}
+
+enum { SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7 };
+
+static const struct plat_sci_port scif[] __initconst = {
+	SCIF_DATA(SCIF0, 0xe8007000, gic_iid(221)), /* SCIF0 */
+	SCIF_DATA(SCIF1, 0xe8007800, gic_iid(225)), /* SCIF1 */
+	SCIF_DATA(SCIF2, 0xe8008000, gic_iid(229)), /* SCIF2 */
+	SCIF_DATA(SCIF3, 0xe8008800, gic_iid(233)), /* SCIF3 */
+	SCIF_DATA(SCIF4, 0xe8009000, gic_iid(237)), /* SCIF4 */
+	SCIF_DATA(SCIF5, 0xe8009800, gic_iid(241)), /* SCIF5 */
+	SCIF_DATA(SCIF6, 0xe800a000, gic_iid(245)), /* SCIF6 */
+	SCIF_DATA(SCIF7, 0xe800a800, gic_iid(249)), /* SCIF7 */
+};
+
+static inline void r7s72100_register_scif(int idx)
+{
+	platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
+				      sizeof(struct plat_sci_port));
+}
+
+void __init r7s72100_add_dt_devices(void)
+{
+	r7s72100_register_scif(SCIF0);
+	r7s72100_register_scif(SCIF1);
+	r7s72100_register_scif(SCIF2);
+	r7s72100_register_scif(SCIF3);
+	r7s72100_register_scif(SCIF4);
+	r7s72100_register_scif(SCIF5);
+	r7s72100_register_scif(SCIF6);
+	r7s72100_register_scif(SCIF7);
+}
+
+void __init r7s72100_init_early(void)
+{
+	shmobile_setup_delay(400, 1, 3); /* Cortex-A9 @ 400MHz */
+}
+
+#ifdef CONFIG_USE_OF
+static const char *r7s72100_boards_compat_dt[] __initdata = {
+	"renesas,r7s72100",
+	NULL,
+};
+
+DT_MACHINE_START(R7S72100_DT, "Generic R7S72100 (Flattened Device Tree)")
+	.init_early	= r7s72100_init_early,
+	.dt_compat	= r7s72100_boards_compat_dt,
+MACHINE_END
+#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index 7f45c2e..b0f2749 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -18,12 +18,14 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/irq.h>
-#include <linux/irqchip.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
 #include <linux/platform_data/irq-renesas-irqc.h>
 #include <linux/serial_sci.h>
+#include <linux/sh_dma.h>
+#include <linux/sh_timer.h>
 #include <mach/common.h>
+#include <mach/dma-register.h>
 #include <mach/irqs.h>
 #include <mach/r8a73a4.h>
 #include <asm/mach/arch.h>
@@ -169,7 +171,26 @@ static const struct resource thermal0_resources[] = {
 					thermal0_resources,		\
 					ARRAY_SIZE(thermal0_resources))
 
-void __init r8a73a4_add_standard_devices(void)
+static struct sh_timer_config cmt10_platform_data = {
+	.name = "CMT10",
+	.timer_bit = 0,
+	.clockevent_rating = 80,
+};
+
+static struct resource cmt10_resources[] = {
+	DEFINE_RES_MEM(0xe6130010, 0x0c),
+	DEFINE_RES_MEM(0xe6130000, 0x04),
+	DEFINE_RES_IRQ(gic_spi(120)), /* CMT1_0 */
+};
+
+#define r8a7790_register_cmt(idx)					\
+	platform_device_register_resndata(&platform_bus, "sh_cmt",	\
+					  idx, cmt##idx##_resources,	\
+					  ARRAY_SIZE(cmt##idx##_resources), \
+					  &cmt##idx##_platform_data,	\
+					  sizeof(struct sh_timer_config))
+
+void __init r8a73a4_add_dt_devices(void)
 {
 	r8a73a4_register_scif(SCIFA0);
 	r8a73a4_register_scif(SCIFA1);
@@ -177,26 +198,122 @@ void __init r8a73a4_add_standard_devices(void)
 	r8a73a4_register_scif(SCIFB1);
 	r8a73a4_register_scif(SCIFB2);
 	r8a73a4_register_scif(SCIFB3);
+	r8a7790_register_cmt(10);
+}
+
+/* DMA */
+static const struct sh_dmae_slave_config dma_slaves[] = {
+	{
+		.slave_id	= SHDMA_SLAVE_MMCIF0_TX,
+		.addr		= 0xee200034,
+		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
+		.mid_rid	= 0xd1,
+	}, {
+		.slave_id	= SHDMA_SLAVE_MMCIF0_RX,
+		.addr		= 0xee200034,
+		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
+		.mid_rid	= 0xd2,
+	}, {
+		.slave_id	= SHDMA_SLAVE_MMCIF1_TX,
+		.addr		= 0xee220034,
+		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
+		.mid_rid	= 0xe1,
+	}, {
+		.slave_id	= SHDMA_SLAVE_MMCIF1_RX,
+		.addr		= 0xee220034,
+		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
+		.mid_rid	= 0xe2,
+	},
+};
+
+#define DMAE_CHANNEL(a, b)				\
+	{						\
+		.offset         = (a) - 0x20,		\
+		.dmars          = (a) - 0x20 + 0x40,	\
+		.chclr_bit	= (b),			\
+		.chclr_offset	= 0x80 - 0x20,		\
+	}
+
+static const struct sh_dmae_channel dma_channels[] = {
+	DMAE_CHANNEL(0x8000, 0),
+	DMAE_CHANNEL(0x8080, 1),
+	DMAE_CHANNEL(0x8100, 2),
+	DMAE_CHANNEL(0x8180, 3),
+	DMAE_CHANNEL(0x8200, 4),
+	DMAE_CHANNEL(0x8280, 5),
+	DMAE_CHANNEL(0x8300, 6),
+	DMAE_CHANNEL(0x8380, 7),
+	DMAE_CHANNEL(0x8400, 8),
+	DMAE_CHANNEL(0x8480, 9),
+	DMAE_CHANNEL(0x8500, 10),
+	DMAE_CHANNEL(0x8580, 11),
+	DMAE_CHANNEL(0x8600, 12),
+	DMAE_CHANNEL(0x8680, 13),
+	DMAE_CHANNEL(0x8700, 14),
+	DMAE_CHANNEL(0x8780, 15),
+	DMAE_CHANNEL(0x8800, 16),
+	DMAE_CHANNEL(0x8880, 17),
+	DMAE_CHANNEL(0x8900, 18),
+	DMAE_CHANNEL(0x8980, 19),
+};
+
+static const struct sh_dmae_pdata dma_pdata = {
+	.slave		= dma_slaves,
+	.slave_num	= ARRAY_SIZE(dma_slaves),
+	.channel	= dma_channels,
+	.channel_num	= ARRAY_SIZE(dma_channels),
+	.ts_low_shift	= TS_LOW_SHIFT,
+	.ts_low_mask	= TS_LOW_BIT << TS_LOW_SHIFT,
+	.ts_high_shift	= TS_HI_SHIFT,
+	.ts_high_mask	= TS_HI_BIT << TS_HI_SHIFT,
+	.ts_shift	= dma_ts_shift,
+	.ts_shift_num	= ARRAY_SIZE(dma_ts_shift),
+	.dmaor_init     = DMAOR_DME,
+	.chclr_present	= 1,
+	.chclr_bitwise	= 1,
+};
+
+static struct resource dma_resources[] = {
+	DEFINE_RES_MEM(0xe6700020, 0x89e0),
+	DEFINE_RES_IRQ_NAMED(gic_spi(220), "error_irq"),
+	{
+		/* IRQ for channels 0-19 */
+		.start  = gic_spi(200),
+		.end    = gic_spi(219),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+#define r8a73a4_register_dmac()							\
+	platform_device_register_resndata(&platform_bus, "sh-dma-engine", 0,	\
+				dma_resources, ARRAY_SIZE(dma_resources),	\
+				&dma_pdata, sizeof(dma_pdata))
+
+void __init r8a73a4_add_standard_devices(void)
+{
+	r8a73a4_add_dt_devices();
 	r8a73a4_register_irqc(0);
 	r8a73a4_register_irqc(1);
 	r8a73a4_register_thermal();
+	r8a73a4_register_dmac();
 }
 
-#ifdef CONFIG_USE_OF
-void __init r8a73a4_add_standard_devices_dt(void)
+void __init r8a73a4_init_early(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+#ifndef CONFIG_ARM_ARCH_TIMER
+	shmobile_setup_delay(1500, 2, 4); /* Cortex-A15 @ 1500MHz */
+#endif
 }
 
+#ifdef CONFIG_USE_OF
+
 static const char *r8a73a4_boards_compat_dt[] __initdata = {
 	"renesas,r8a73a4",
 	NULL,
 };
 
 DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)")
-	.init_irq	= irqchip_init,
-	.init_machine	= r8a73a4_add_standard_devices_dt,
-	.init_time	= shmobile_timer_init,
+	.init_early	= r8a73a4_init_early,
 	.dt_compat	= r8a73a4_boards_compat_dt,
 MACHINE_END
 #endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 00c5a70..b7d4b2c 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -22,6 +22,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/platform_data/irq-renesas-intc-irqpin.h>
 #include <linux/platform_device.h>
 #include <linux/of_platform.h>
@@ -588,6 +590,16 @@ static const struct sh_dmae_slave_config r8a7740_dmae_slaves[] = {
 		.addr		= 0xfe1f0064,
 		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
 		.mid_rid	= 0xb5,
+	}, {
+		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
+		.addr		= 0xe6bd0034,
+		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
+		.mid_rid	= 0xd1,
+	}, {
+		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
+		.addr		= 0xe6bd0034,
+		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
+		.mid_rid	= 0xd2,
 	},
 };
 
@@ -986,16 +998,22 @@ void __init r8a7740_add_early_devices(void)
 
 #ifdef CONFIG_USE_OF
 
-static const struct of_dev_auxdata r8a7740_auxdata_lookup[] __initconst = {
-	{ }
-};
+void __init r8a7740_add_early_devices_dt(void)
+{
+	shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
+
+	early_platform_add_devices(r8a7740_early_devices,
+				   ARRAY_SIZE(r8a7740_early_devices));
+
+	/* setup early console here as well */
+	shmobile_setup_console();
+}
 
 void __init r8a7740_add_standard_devices_dt(void)
 {
 	platform_add_devices(r8a7740_devices_dt,
 			    ARRAY_SIZE(r8a7740_devices_dt));
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     r8a7740_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 void __init r8a7740_init_delay(void)
@@ -1003,6 +1021,36 @@ void __init r8a7740_init_delay(void)
 	shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
 };
 
+void __init r8a7740_init_irq_of(void)
+{
+	void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10);
+	void __iomem *intc_msk_base = ioremap_nocache(0xe6900040, 0x10);
+	void __iomem *pfc_inta_ctrl = ioremap_nocache(0xe605807c, 0x4);
+
+	irqchip_init();
+
+	/* route signals to GIC */
+	iowrite32(0x0, pfc_inta_ctrl);
+
+	/*
+	 * To mask the shared interrupt to SPI 149 we must ensure to set
+	 * PRIO *and* MASK. Else we run into IRQ floods when registering
+	 * the intc_irqpin devices
+	 */
+	iowrite32(0x0, intc_prio_base + 0x0);
+	iowrite32(0x0, intc_prio_base + 0x4);
+	iowrite32(0x0, intc_prio_base + 0x8);
+	iowrite32(0x0, intc_prio_base + 0xc);
+	iowrite8(0xff, intc_msk_base + 0x0);
+	iowrite8(0xff, intc_msk_base + 0x4);
+	iowrite8(0xff, intc_msk_base + 0x8);
+	iowrite8(0xff, intc_msk_base + 0xc);
+
+	iounmap(intc_prio_base);
+	iounmap(intc_msk_base);
+	iounmap(pfc_inta_ctrl);
+}
+
 static void __init r8a7740_generic_init(void)
 {
 	r8a7740_clock_init(0);
@@ -1019,7 +1067,6 @@ DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)")
 	.init_early	= r8a7740_init_delay,
 	.init_irq	= r8a7740_init_irq_of,
 	.init_machine	= r8a7740_generic_init,
-	.init_time	= shmobile_timer_init,
 	.dt_compat	= r8a7740_boards_compat_dt,
 MACHINE_END
 
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index 80c2039..03fcc59 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -24,6 +24,7 @@
 #include <linux/irqchip/arm-gic.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/platform_data/dma-rcar-hpbdma.h>
 #include <linux/platform_data/gpio-rcar.h>
 #include <linux/platform_data/irq-renesas-intc-irqpin.h>
 #include <linux/platform_device.h>
@@ -53,7 +54,7 @@
 	.irqs		= SCIx_IRQ_MUXED(irq),			\
 }
 
-static struct plat_sci_port scif_platform_data[] = {
+static struct plat_sci_port scif_platform_data[] __initdata = {
 	SCIF_INFO(0xffe40000, gic_iid(0x66)),
 	SCIF_INFO(0xffe41000, gic_iid(0x67)),
 	SCIF_INFO(0xffe42000, gic_iid(0x68)),
@@ -63,24 +64,24 @@ static struct plat_sci_port scif_platform_data[] = {
 };
 
 /* TMU */
-static struct resource sh_tmu0_resources[] = {
+static struct resource sh_tmu0_resources[] __initdata = {
 	DEFINE_RES_MEM(0xffd80008, 12),
 	DEFINE_RES_IRQ(gic_iid(0x40)),
 };
 
-static struct sh_timer_config sh_tmu0_platform_data = {
+static struct sh_timer_config sh_tmu0_platform_data __initdata = {
 	.name			= "TMU00",
 	.channel_offset		= 0x4,
 	.timer_bit		= 0,
 	.clockevent_rating	= 200,
 };
 
-static struct resource sh_tmu1_resources[] = {
+static struct resource sh_tmu1_resources[] __initdata = {
 	DEFINE_RES_MEM(0xffd80014, 12),
 	DEFINE_RES_IRQ(gic_iid(0x41)),
 };
 
-static struct sh_timer_config sh_tmu1_platform_data = {
+static struct sh_timer_config sh_tmu1_platform_data __initdata = {
 	.name			= "TMU01",
 	.channel_offset		= 0x10,
 	.timer_bit		= 1,
@@ -95,43 +96,46 @@ static struct sh_timer_config sh_tmu1_platform_data = {
 		&sh_tmu##idx##_platform_data,		\
 		sizeof(sh_tmu##idx##_platform_data))
 
-/* USB PHY */
-static struct resource usb_phy_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffe70800, 0x100),
-	DEFINE_RES_MEM(0xffe76000, 0x100),
-};
-
-void __init r8a7778_add_usb_phy_device(struct rcar_phy_platform_data *pdata)
+int r8a7778_usb_phy_power(bool enable)
 {
-	platform_device_register_resndata(&platform_bus, "rcar_usb_phy", -1,
-					  usb_phy_resources,
-					  ARRAY_SIZE(usb_phy_resources),
-					  pdata, sizeof(*pdata));
+	static struct usb_phy *phy = NULL;
+	int ret = 0;
+
+	if (!phy)
+		phy = usb_get_phy(USB_PHY_TYPE_USB2);
+
+	if (IS_ERR(phy)) {
+		pr_err("kernel doesn't have usb phy driver\n");
+		return PTR_ERR(phy);
+	}
+
+	if (enable)
+		ret = usb_phy_init(phy);
+	else
+		usb_phy_shutdown(phy);
+
+	return ret;
 }
 
 /* USB */
-static struct usb_phy *phy;
-
 static int usb_power_on(struct platform_device *pdev)
 {
-	if (IS_ERR(phy))
-		return PTR_ERR(phy);
+	int ret = r8a7778_usb_phy_power(true);
+
+	if (ret)
+		return ret;
 
 	pm_runtime_enable(&pdev->dev);
 	pm_runtime_get_sync(&pdev->dev);
 
-	usb_phy_init(phy);
-
 	return 0;
 }
 
 static void usb_power_off(struct platform_device *pdev)
 {
-	if (IS_ERR(phy))
+	if (r8a7778_usb_phy_power(false))
 		return;
 
-	usb_phy_shutdown(phy);
-
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 }
@@ -188,32 +192,18 @@ static struct platform_device_info hci##_info __initdata = {	\
 USB_PLATFORM_INFO(ehci);
 USB_PLATFORM_INFO(ohci);
 
-/* Ether */
-static struct resource ether_resources[] = {
-	DEFINE_RES_MEM(0xfde00000, 0x400),
-	DEFINE_RES_IRQ(gic_iid(0x89)),
-};
-
-void __init r8a7778_add_ether_device(struct sh_eth_plat_data *pdata)
-{
-	platform_device_register_resndata(&platform_bus, "r8a777x-ether", -1,
-					  ether_resources,
-					  ARRAY_SIZE(ether_resources),
-					  pdata, sizeof(*pdata));
-}
-
 /* PFC/GPIO */
-static struct resource pfc_resources[] = {
+static struct resource pfc_resources[] __initdata = {
 	DEFINE_RES_MEM(0xfffc0000, 0x118),
 };
 
 #define R8A7778_GPIO(idx)						\
-static struct resource r8a7778_gpio##idx##_resources[] = {		\
+static struct resource r8a7778_gpio##idx##_resources[] __initdata = {	\
 	DEFINE_RES_MEM(0xffc40000 + 0x1000 * (idx), 0x30),		\
 	DEFINE_RES_IRQ(gic_iid(0x87)),					\
 };									\
 									\
-static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data = {	\
+static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data __initdata = { \
 	.gpio_base	= 32 * (idx),					\
 	.irq_base	= GPIO_IRQ_BASE(idx),				\
 	.number_of_pins	= 32,						\
@@ -248,30 +238,6 @@ void __init r8a7778_pinmux_init(void)
 	r8a7778_register_gpio(4);
 };
 
-/* SDHI */
-static struct resource sdhi_resources[] = {
-	/* SDHI0 */
-	DEFINE_RES_MEM(0xFFE4C000, 0x100),
-	DEFINE_RES_IRQ(gic_iid(0x77)),
-	/* SDHI1 */
-	DEFINE_RES_MEM(0xFFE4D000, 0x100),
-	DEFINE_RES_IRQ(gic_iid(0x78)),
-	/* SDHI2 */
-	DEFINE_RES_MEM(0xFFE4F000, 0x100),
-	DEFINE_RES_IRQ(gic_iid(0x76)),
-};
-
-void __init r8a7778_sdhi_init(int id,
-			      struct sh_mobile_sdhi_info *info)
-{
-	BUG_ON(id < 0 || id > 2);
-
-	platform_device_register_resndata(
-		&platform_bus, "sh_mobile_sdhi", id,
-		sdhi_resources + (2 * id), 2,
-		info, sizeof(*info));
-}
-
 /* I2C */
 static struct resource i2c_resources[] __initdata = {
 	/* I2C0 */
@@ -288,7 +254,7 @@ static struct resource i2c_resources[] __initdata = {
 	DEFINE_RES_IRQ(gic_iid(0x6d)),
 };
 
-void __init r8a7778_add_i2c_device(int id)
+static void __init r8a7778_register_i2c(int id)
 {
 	BUG_ON(id < 0 || id > 3);
 
@@ -310,7 +276,7 @@ static struct resource hspi_resources[] __initdata = {
 	DEFINE_RES_IRQ(gic_iid(0x75)),
 };
 
-void __init r8a7778_add_hspi_device(int id)
+static void __init r8a7778_register_hspi(int id)
 {
 	BUG_ON(id < 0 || id > 2);
 
@@ -319,21 +285,7 @@ void __init r8a7778_add_hspi_device(int id)
 		hspi_resources + (2 * id), 2);
 }
 
-/* MMC */
-static struct resource mmc_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffe4e000, 0x100),
-	DEFINE_RES_IRQ(gic_iid(0x5d)),
-};
-
-void __init r8a7778_add_mmc_device(struct sh_mmcif_plat_data *info)
-{
-	platform_device_register_resndata(
-		&platform_bus, "sh_mmcif", -1,
-		mmc_resources, ARRAY_SIZE(mmc_resources),
-		info, sizeof(*info));
-}
-
-void __init r8a7778_add_standard_devices(void)
+void __init r8a7778_add_dt_devices(void)
 {
 	int i;
 
@@ -357,20 +309,114 @@ void __init r8a7778_add_standard_devices(void)
 	r8a7778_register_tmu(1);
 }
 
-void __init r8a7778_init_late(void)
+/* HPB-DMA */
+
+/* Asynchronous mode register (ASYNCMDR) bits */
+#define HPB_DMAE_ASYNCMDR_ASMD22_MASK	BIT(2)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD22_SINGLE	BIT(2)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD22_MULTI	0	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD21_MASK	BIT(1)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE	BIT(1)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD21_MULTI	0	/* SDHI0 */
+
+static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
+	{
+		.id	= HPBDMA_SLAVE_SDHI0_TX,
+		.addr	= 0xffe4c000 + 0x30,
+		.dcr	= HPB_DMAE_DCR_SPDS_16BIT |
+			  HPB_DMAE_DCR_DMDL |
+			  HPB_DMAE_DCR_DPDS_16BIT,
+		.rstr	= HPB_DMAE_ASYNCRSTR_ASRST21 |
+			  HPB_DMAE_ASYNCRSTR_ASRST22 |
+			  HPB_DMAE_ASYNCRSTR_ASRST23,
+		.mdr	= HPB_DMAE_ASYNCMDR_ASMD21_MULTI,
+		.mdm	= HPB_DMAE_ASYNCMDR_ASMD21_MASK,
+		.port	= 0x0D0C,
+		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
+		.dma_ch	= 21,
+	}, {
+		.id	= HPBDMA_SLAVE_SDHI0_RX,
+		.addr	= 0xffe4c000 + 0x30,
+		.dcr	= HPB_DMAE_DCR_SMDL |
+			  HPB_DMAE_DCR_SPDS_16BIT |
+			  HPB_DMAE_DCR_DPDS_16BIT,
+		.rstr	= HPB_DMAE_ASYNCRSTR_ASRST21 |
+			  HPB_DMAE_ASYNCRSTR_ASRST22 |
+			  HPB_DMAE_ASYNCRSTR_ASRST23,
+		.mdr	= HPB_DMAE_ASYNCMDR_ASMD22_MULTI,
+		.mdm	= HPB_DMAE_ASYNCMDR_ASMD22_MASK,
+		.port	= 0x0D0C,
+		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
+		.dma_ch	= 22,
+	},
+};
+
+static const struct hpb_dmae_channel hpb_dmae_channels[] = {
+	HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */
+	HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */
+};
+
+static struct hpb_dmae_pdata dma_platform_data __initdata = {
+	.slaves			= hpb_dmae_slaves,
+	.num_slaves		= ARRAY_SIZE(hpb_dmae_slaves),
+	.channels		= hpb_dmae_channels,
+	.num_channels		= ARRAY_SIZE(hpb_dmae_channels),
+	.ts_shift		= {
+		[XMIT_SZ_8BIT]	= 0,
+		[XMIT_SZ_16BIT]	= 1,
+		[XMIT_SZ_32BIT]	= 2,
+	},
+	.num_hw_channels	= 39,
+};
+
+static struct resource hpb_dmae_resources[] __initdata = {
+	/* Channel registers */
+	DEFINE_RES_MEM(0xffc08000, 0x1000),
+	/* Common registers */
+	DEFINE_RES_MEM(0xffc09000, 0x170),
+	/* Asynchronous reset registers */
+	DEFINE_RES_MEM(0xffc00300, 4),
+	/* Asynchronous mode registers */
+	DEFINE_RES_MEM(0xffc00400, 4),
+	/* IRQ for DMA channels */
+	DEFINE_RES_NAMED(gic_iid(0x7b), 5, NULL, IORESOURCE_IRQ),
+};
+
+static void __init r8a7778_register_hpb_dmae(void)
 {
-	phy = usb_get_phy(USB_PHY_TYPE_USB2);
+	platform_device_register_resndata(&platform_bus, "hpb-dma-engine", -1,
+					  hpb_dmae_resources,
+					  ARRAY_SIZE(hpb_dmae_resources),
+					  &dma_platform_data,
+					  sizeof(dma_platform_data));
+}
 
+void __init r8a7778_add_standard_devices(void)
+{
+	r8a7778_add_dt_devices();
+	r8a7778_register_i2c(0);
+	r8a7778_register_i2c(1);
+	r8a7778_register_i2c(2);
+	r8a7778_register_i2c(3);
+	r8a7778_register_hspi(0);
+	r8a7778_register_hspi(1);
+	r8a7778_register_hspi(2);
+
+	r8a7778_register_hpb_dmae();
+}
+
+void __init r8a7778_init_late(void)
+{
 	platform_device_register_full(&ehci_info);
 	platform_device_register_full(&ohci_info);
 }
 
-static struct renesas_intc_irqpin_config irqpin_platform_data = {
+static struct renesas_intc_irqpin_config irqpin_platform_data __initdata = {
 	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
 	.sense_bitfield_width = 2,
 };
 
-static struct resource irqpin_resources[] = {
+static struct resource irqpin_resources[] __initdata = {
 	DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */
 	DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */
 	DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */
@@ -382,7 +428,7 @@ static struct resource irqpin_resources[] = {
 	DEFINE_RES_IRQ(gic_iid(0x3e)), /* IRQ3 */
 };
 
-void __init r8a7778_init_irq_extpin(int irlm)
+void __init r8a7778_init_irq_extpin_dt(int irlm)
 {
 	void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE);
 	unsigned long tmp;
@@ -400,7 +446,11 @@ void __init r8a7778_init_irq_extpin(int irlm)
 	tmp |= (1 << 21); /* LVLMODE = 1 */
 	iowrite32(tmp, icr0);
 	iounmap(icr0);
+}
 
+void __init r8a7778_init_irq_extpin(int irlm)
+{
+	r8a7778_init_irq_extpin_dt(irlm);
 	if (irlm)
 		platform_device_register_resndata(
 			&platform_bus, "renesas_intc_irqpin", -1,
@@ -408,17 +458,25 @@ void __init r8a7778_init_irq_extpin(int irlm)
 			&irqpin_platform_data, sizeof(irqpin_platform_data));
 }
 
+void __init r8a7778_init_delay(void)
+{
+	shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
+}
+
+#ifdef CONFIG_USE_OF
 #define INT2SMSKCR0	0x82288 /* 0xfe782288 */
 #define INT2SMSKCR1	0x8228c /* 0xfe78228c */
 
 #define INT2NTSR0	0x00018 /* 0xfe700018 */
 #define INT2NTSR1	0x0002c /* 0xfe70002c */
-static void __init r8a7778_init_irq_common(void)
+void __init r8a7778_init_irq_dt(void)
 {
 	void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000);
 
 	BUG_ON(!base);
 
+	irqchip_init();
+
 	/* route all interrupts to ARM */
 	__raw_writel(0x73ffffff, base + INT2NTSR0);
 	__raw_writel(0xffffffff, base + INT2NTSR1);
@@ -430,43 +488,6 @@ static void __init r8a7778_init_irq_common(void)
 	iounmap(base);
 }
 
-void __init r8a7778_init_irq(void)
-{
-	void __iomem *gic_dist_base;
-	void __iomem *gic_cpu_base;
-
-	gic_dist_base = ioremap_nocache(0xfe438000, PAGE_SIZE);
-	gic_cpu_base  = ioremap_nocache(0xfe430000, PAGE_SIZE);
-	BUG_ON(!gic_dist_base || !gic_cpu_base);
-
-	/* use GIC to handle interrupts */
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-
-	r8a7778_init_irq_common();
-}
-
-void __init r8a7778_init_delay(void)
-{
-	shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
-}
-
-#ifdef CONFIG_USE_OF
-void __init r8a7778_init_irq_dt(void)
-{
-	irqchip_init();
-	r8a7778_init_irq_common();
-}
-
-static const struct of_dev_auxdata r8a7778_auxdata_lookup[] __initconst = {
-	{},
-};
-
-void __init r8a7778_add_standard_devices_dt(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     r8a7778_auxdata_lookup, NULL);
-}
-
 static const char *r8a7778_compat_dt[] __initdata = {
 	"renesas,r8a7778",
 	NULL,
@@ -475,8 +496,6 @@ static const char *r8a7778_compat_dt[] __initdata = {
 DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)")
 	.init_early	= r8a7778_init_delay,
 	.init_irq	= r8a7778_init_irq_dt,
-	.init_machine	= r8a7778_add_standard_devices_dt,
-	.init_time	= shmobile_timer_init,
 	.dt_compat	= r8a7778_compat_dt,
 	.init_late      = r8a7778_init_late,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 3986877..13049e9 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -22,14 +22,17 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/of_platform.h>
+#include <linux/platform_data/dma-rcar-hpbdma.h>
 #include <linux/platform_data/gpio-rcar.h>
+#include <linux/platform_data/irq-renesas-intc-irqpin.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/input.h>
 #include <linux/io.h>
 #include <linux/serial_sci.h>
-#include <linux/sh_intc.h>
 #include <linux/sh_timer.h>
 #include <linux/dma-mapping.h>
 #include <linux/usb/otg.h>
@@ -37,7 +40,6 @@
 #include <linux/usb/ehci_pdriver.h>
 #include <linux/usb/ohci_pdriver.h>
 #include <linux/pm_runtime.h>
-#include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/r8a7779.h>
 #include <mach/common.h>
@@ -69,6 +71,64 @@ void __init r8a7779_map_io(void)
 	iotable_init(r8a7779_io_desc, ARRAY_SIZE(r8a7779_io_desc));
 }
 
+/* IRQ */
+#define INT2SMSKCR0 IOMEM(0xfe7822a0)
+#define INT2SMSKCR1 IOMEM(0xfe7822a4)
+#define INT2SMSKCR2 IOMEM(0xfe7822a8)
+#define INT2SMSKCR3 IOMEM(0xfe7822ac)
+#define INT2SMSKCR4 IOMEM(0xfe7822b0)
+
+#define INT2NTSR0 IOMEM(0xfe700060)
+#define INT2NTSR1 IOMEM(0xfe700064)
+
+static struct renesas_intc_irqpin_config irqpin0_platform_data __initdata = {
+	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
+	.sense_bitfield_width = 2,
+};
+
+static struct resource irqpin0_resources[] __initdata = {
+	DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */
+	DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */
+	DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */
+	DEFINE_RES_MEM(0xfe780044, 4), /* INTMSK0 */
+	DEFINE_RES_MEM(0xfe780064, 4), /* INTMSKCLR0 */
+	DEFINE_RES_IRQ(gic_spi(27)), /* IRQ0 */
+	DEFINE_RES_IRQ(gic_spi(28)), /* IRQ1 */
+	DEFINE_RES_IRQ(gic_spi(29)), /* IRQ2 */
+	DEFINE_RES_IRQ(gic_spi(30)), /* IRQ3 */
+};
+
+void __init r8a7779_init_irq_extpin_dt(int irlm)
+{
+	void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE);
+	u32 tmp;
+
+	if (!icr0) {
+		pr_warn("r8a7779: unable to setup external irq pin mode\n");
+		return;
+	}
+
+	tmp = ioread32(icr0);
+	if (irlm)
+		tmp |= 1 << 23; /* IRQ0 -> IRQ3 as individual pins */
+	else
+		tmp &= ~(1 << 23); /* IRL mode - not supported */
+	tmp |= (1 << 21); /* LVLMODE = 1 */
+	iowrite32(tmp, icr0);
+	iounmap(icr0);
+}
+
+void __init r8a7779_init_irq_extpin(int irlm)
+{
+	r8a7779_init_irq_extpin_dt(irlm);
+	if (irlm)
+		platform_device_register_resndata(
+			&platform_bus, "renesas_intc_irqpin", -1,
+			irqpin0_resources, ARRAY_SIZE(irqpin0_resources),
+			&irqpin0_platform_data, sizeof(irqpin0_platform_data));
+}
+
+/* PFC/GPIO */
 static struct resource r8a7779_pfc_resources[] = {
 	DEFINE_RES_MEM(0xfffc0000, 0x023c),
 };
@@ -388,15 +448,6 @@ static struct platform_device sata_device = {
 	},
 };
 
-/* USB PHY */
-static struct resource usb_phy_resources[] __initdata = {
-	[0] = {
-		.start		= 0xffe70800,
-		.end		= 0xffe70900 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
 /* USB */
 static struct usb_phy *phy;
 
@@ -548,7 +599,7 @@ static struct platform_device ohci1_device = {
 };
 
 /* Ether */
-static struct resource ether_resources[] = {
+static struct resource ether_resources[] __initdata = {
 	{
 		.start	= 0xfde00000,
 		.end	= 0xfde003ff,
@@ -559,6 +610,185 @@ static struct resource ether_resources[] = {
 	},
 };
 
+#define R8A7779_VIN(idx) \
+static struct resource vin##idx##_resources[] __initdata = {		\
+	DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000),		\
+	DEFINE_RES_IRQ(gic_iid(0x5f + (idx))),				\
+};									\
+									\
+static struct platform_device_info vin##idx##_info __initdata = {	\
+	.parent		= &platform_bus,				\
+	.name		= "r8a7779-vin",				\
+	.id		= idx,						\
+	.res		= vin##idx##_resources,				\
+	.num_res	= ARRAY_SIZE(vin##idx##_resources),		\
+	.dma_mask	= DMA_BIT_MASK(32),				\
+}
+
+R8A7779_VIN(0);
+R8A7779_VIN(1);
+R8A7779_VIN(2);
+R8A7779_VIN(3);
+
+static struct platform_device_info *vin_info_table[] __initdata = {
+	&vin0_info,
+	&vin1_info,
+	&vin2_info,
+	&vin3_info,
+};
+
+/* HPB-DMA */
+
+/* Asynchronous mode register bits */
+#define HPB_DMAE_ASYNCMDR_ASMD43_MASK		BIT(23)	/* MMC1 */
+#define HPB_DMAE_ASYNCMDR_ASMD43_SINGLE		BIT(23)	/* MMC1 */
+#define HPB_DMAE_ASYNCMDR_ASMD43_MULTI		0	/* MMC1 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD43_MASK		BIT(22)	/* MMC1 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD43_BURST	BIT(22)	/* MMC1 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD43_NBURST	0	/* MMC1 */
+#define HPB_DMAE_ASYNCMDR_ASMD24_MASK		BIT(21)	/* MMC0 */
+#define HPB_DMAE_ASYNCMDR_ASMD24_SINGLE		BIT(21)	/* MMC0 */
+#define HPB_DMAE_ASYNCMDR_ASMD24_MULTI		0	/* MMC0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD24_MASK		BIT(20)	/* MMC0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD24_BURST	BIT(20)	/* MMC0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD24_NBURST	0	/* MMC0 */
+#define HPB_DMAE_ASYNCMDR_ASMD41_MASK		BIT(19)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD41_SINGLE		BIT(19)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD41_MULTI		0	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD41_MASK		BIT(18)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD41_BURST	BIT(18)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD41_NBURST	0	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD40_MASK		BIT(17)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD40_SINGLE		BIT(17)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD40_MULTI		0	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD40_MASK		BIT(16)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD40_BURST	BIT(16)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD40_NBURST	0	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD39_MASK		BIT(15)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD39_SINGLE		BIT(15)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD39_MULTI		0	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD39_MASK		BIT(14)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD39_BURST	BIT(14)	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD39_NBURST	0	/* SDHI3 */
+#define HPB_DMAE_ASYNCMDR_ASMD27_MASK		BIT(13)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD27_SINGLE		BIT(13)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD27_MULTI		0	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD27_MASK		BIT(12)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD27_BURST	BIT(12)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD27_NBURST	0	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD26_MASK		BIT(11)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD26_SINGLE		BIT(11)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD26_MULTI		0	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD26_MASK		BIT(10)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD26_BURST	BIT(10)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD26_NBURST	0	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD25_MASK		BIT(9)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD25_SINGLE		BIT(9)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD25_MULTI		0	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD25_MASK		BIT(8)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD25_BURST	BIT(8)	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD25_NBURST	0	/* SDHI2 */
+#define HPB_DMAE_ASYNCMDR_ASMD23_MASK		BIT(7)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD23_SINGLE		BIT(7)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD23_MULTI		0	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD23_MASK		BIT(6)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD23_BURST	BIT(6)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD23_NBURST	0	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD22_MASK		BIT(5)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD22_SINGLE		BIT(5)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD22_MULTI		0	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD22_MASK		BIT(4)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD22_BURST	BIT(4)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD22_NBURST	0	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD21_MASK		BIT(3)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE		BIT(3)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD21_MULTI		0	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD21_MASK		BIT(2)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD21_BURST	BIT(2)	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD21_NBURST	0	/* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD20_MASK		BIT(1)	/* SDHI1 */
+#define HPB_DMAE_ASYNCMDR_ASMD20_SINGLE		BIT(1)	/* SDHI1 */
+#define HPB_DMAE_ASYNCMDR_ASMD20_MULTI		0	/* SDHI1 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD20_MASK		BIT(0)	/* SDHI1 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD20_BURST	BIT(0)	/* SDHI1 */
+#define HPB_DMAE_ASYNCMDR_ASBTMD20_NBURST	0	/* SDHI1 */
+
+static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
+	{
+		.id	= HPBDMA_SLAVE_SDHI0_TX,
+		.addr	= 0xffe4c000 + 0x30,
+		.dcr	= HPB_DMAE_DCR_SPDS_16BIT |
+			  HPB_DMAE_DCR_DMDL |
+			  HPB_DMAE_DCR_DPDS_16BIT,
+		.rstr	= HPB_DMAE_ASYNCRSTR_ASRST21 |
+			  HPB_DMAE_ASYNCRSTR_ASRST22 |
+			  HPB_DMAE_ASYNCRSTR_ASRST23,
+		.mdr	= HPB_DMAE_ASYNCMDR_ASMD21_SINGLE |
+			  HPB_DMAE_ASYNCMDR_ASBTMD21_NBURST,
+		.mdm	= HPB_DMAE_ASYNCMDR_ASMD21_MASK |
+			  HPB_DMAE_ASYNCMDR_ASBTMD21_MASK,
+		.port	= 0x0D0C,
+		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
+		.dma_ch	= 21,
+	}, {
+		.id	= HPBDMA_SLAVE_SDHI0_RX,
+		.addr	= 0xffe4c000 + 0x30,
+		.dcr	= HPB_DMAE_DCR_SMDL |
+			  HPB_DMAE_DCR_SPDS_16BIT |
+			  HPB_DMAE_DCR_DPDS_16BIT,
+		.rstr	= HPB_DMAE_ASYNCRSTR_ASRST21 |
+			  HPB_DMAE_ASYNCRSTR_ASRST22 |
+			  HPB_DMAE_ASYNCRSTR_ASRST23,
+		.mdr	= HPB_DMAE_ASYNCMDR_ASMD22_SINGLE |
+			  HPB_DMAE_ASYNCMDR_ASBTMD22_NBURST,
+		.mdm	= HPB_DMAE_ASYNCMDR_ASMD22_MASK |
+			  HPB_DMAE_ASYNCMDR_ASBTMD22_MASK,
+		.port	= 0x0D0C,
+		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
+		.dma_ch	= 22,
+	},
+};
+
+static const struct hpb_dmae_channel hpb_dmae_channels[] = {
+	HPB_DMAE_CHANNEL(0x93, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */
+	HPB_DMAE_CHANNEL(0x93, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */
+};
+
+static struct hpb_dmae_pdata dma_platform_data __initdata = {
+	.slaves			= hpb_dmae_slaves,
+	.num_slaves		= ARRAY_SIZE(hpb_dmae_slaves),
+	.channels		= hpb_dmae_channels,
+	.num_channels		= ARRAY_SIZE(hpb_dmae_channels),
+	.ts_shift		= {
+		[XMIT_SZ_8BIT]	= 0,
+		[XMIT_SZ_16BIT]	= 1,
+		[XMIT_SZ_32BIT]	= 2,
+	},
+	.num_hw_channels	= 44,
+};
+
+static struct resource hpb_dmae_resources[] __initdata = {
+	/* Channel registers */
+	DEFINE_RES_MEM(0xffc08000, 0x1000),
+	/* Common registers */
+	DEFINE_RES_MEM(0xffc09000, 0x170),
+	/* Asynchronous reset registers */
+	DEFINE_RES_MEM(0xffc00300, 4),
+	/* Asynchronous mode registers */
+	DEFINE_RES_MEM(0xffc00400, 4),
+	/* IRQ for DMA channels */
+	DEFINE_RES_NAMED(gic_iid(0x8e), 12, NULL, IORESOURCE_IRQ),
+};
+
+static void __init r8a7779_register_hpb_dmae(void)
+{
+	platform_device_register_resndata(&platform_bus, "hpb-dma-engine", -1,
+					  hpb_dmae_resources,
+					  ARRAY_SIZE(hpb_dmae_resources),
+					  &dma_platform_data,
+					  sizeof(dma_platform_data));
+}
+
 static struct platform_device *r8a7779_devices_dt[] __initdata = {
 	&scif0_device,
 	&scif1_device,
@@ -592,6 +822,7 @@ void __init r8a7779_add_standard_devices(void)
 			    ARRAY_SIZE(r8a7779_devices_dt));
 	platform_add_devices(r8a7779_standard_devices,
 			    ARRAY_SIZE(r8a7779_standard_devices));
+	r8a7779_register_hpb_dmae();
 }
 
 void __init r8a7779_add_ether_device(struct sh_eth_plat_data *pdata)
@@ -602,12 +833,14 @@ void __init r8a7779_add_ether_device(struct sh_eth_plat_data *pdata)
 					  pdata, sizeof(*pdata));
 }
 
-void __init r8a7779_add_usb_phy_device(struct rcar_phy_platform_data *pdata)
+void __init r8a7779_add_vin_device(int id, struct rcar_vin_platform_data *pdata)
 {
-	platform_device_register_resndata(&platform_bus, "rcar_usb_phy", -1,
-					  usb_phy_resources,
-					  ARRAY_SIZE(usb_phy_resources),
-					  pdata, sizeof(*pdata));
+	BUG_ON(id < 0 || id > 3);
+
+	vin_info_table[id]->data = pdata;
+	vin_info_table[id]->size_data = sizeof(*pdata);
+
+	platform_device_register_full(vin_info_table[id]);
 }
 
 /* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
@@ -616,8 +849,8 @@ void __init __weak r8a7779_register_twd(void) { }
 void __init r8a7779_earlytimer_init(void)
 {
 	r8a7779_clock_init();
-	shmobile_earlytimer_init();
 	r8a7779_register_twd();
+	shmobile_earlytimer_init();
 }
 
 void __init r8a7779_add_early_devices(void)
@@ -660,15 +893,34 @@ void __init r8a7779_init_late(void)
 }
 
 #ifdef CONFIG_USE_OF
+static int r8a7779_set_wake(struct irq_data *data, unsigned int on)
+{
+	return 0; /* always allow wakeup */
+}
+
+void __init r8a7779_init_irq_dt(void)
+{
+	gic_arch_extn.irq_set_wake = r8a7779_set_wake;
+
+	irqchip_init();
+
+	/* route all interrupts to ARM */
+	__raw_writel(0xffffffff, INT2NTSR0);
+	__raw_writel(0x3fffffff, INT2NTSR1);
+
+	/* unmask all known interrupts in INTCS2 */
+	__raw_writel(0xfffffff0, INT2SMSKCR0);
+	__raw_writel(0xfff7ffff, INT2SMSKCR1);
+	__raw_writel(0xfffbffdf, INT2SMSKCR2);
+	__raw_writel(0xbffffffc, INT2SMSKCR3);
+	__raw_writel(0x003fee3f, INT2SMSKCR4);
+}
+
 void __init r8a7779_init_delay(void)
 {
 	shmobile_setup_delay(1000, 2, 4); /* Cortex-A9 @ 1000MHz */
 }
 
-static const struct of_dev_auxdata r8a7779_auxdata_lookup[] __initconst = {
-	{},
-};
-
 void __init r8a7779_add_standard_devices_dt(void)
 {
 	/* clocks are setup late during boot in the case of DT */
@@ -676,8 +928,7 @@ void __init r8a7779_add_standard_devices_dt(void)
 
 	platform_add_devices(r8a7779_devices_dt,
 			     ARRAY_SIZE(r8a7779_devices_dt));
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     r8a7779_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char *r8a7779_compat_dt[] __initdata = {
@@ -691,7 +942,6 @@ DT_MACHINE_START(R8A7779_DT, "Generic R8A7779 (Flattened Device Tree)")
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= r8a7779_init_irq_dt,
 	.init_machine	= r8a7779_add_standard_devices_dt,
-	.init_time	= shmobile_timer_init,
 	.init_late	= r8a7779_init_late,
 	.dt_compat	= r8a7779_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 28f9475..c47bcebb 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -19,28 +19,29 @@
  */
 
 #include <linux/irq.h>
-#include <linux/irqchip.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
-#include <linux/serial_sci.h>
 #include <linux/platform_data/gpio-rcar.h>
 #include <linux/platform_data/irq-renesas-irqc.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r8a7790.h>
 #include <asm/mach/arch.h>
 
-static struct resource pfc_resources[] __initdata = {
+static const struct resource pfc_resources[] __initconst = {
 	DEFINE_RES_MEM(0xe6060000, 0x250),
 };
 
 #define R8A7790_GPIO(idx)						\
-static struct resource r8a7790_gpio##idx##_resources[] __initdata = {	\
+static const struct resource r8a7790_gpio##idx##_resources[] __initconst = { \
 	DEFINE_RES_MEM(0xe6050000 + 0x1000 * (idx), 0x50),		\
 	DEFINE_RES_IRQ(gic_spi(4 + (idx))),				\
 };									\
 									\
-static struct gpio_rcar_config r8a7790_gpio##idx##_platform_data __initdata = {	\
+static const struct gpio_rcar_config					\
+r8a7790_gpio##idx##_platform_data __initconst = {			\
 	.gpio_base	= 32 * (idx),					\
 	.irq_base	= 0,						\
 	.number_of_pins	= 32,						\
@@ -111,7 +112,7 @@ void __init r8a7790_pinmux_init(void)
 enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1,
        HSCIF0, HSCIF1 };
 
-static struct plat_sci_port scif[] __initdata = {
+static const struct plat_sci_port scif[] __initconst = {
 	SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
 	SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
 	SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
@@ -130,11 +131,11 @@ static inline void r8a7790_register_scif(int idx)
 				      sizeof(struct plat_sci_port));
 }
 
-static struct renesas_irqc_config irqc0_data __initdata = {
+static const struct renesas_irqc_config irqc0_data __initconst = {
 	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
 };
 
-static struct resource irqc0_resources[] __initdata = {
+static const struct resource irqc0_resources[] __initconst = {
 	DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */
 	DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */
 	DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */
@@ -149,7 +150,37 @@ static struct resource irqc0_resources[] __initdata = {
 					  &irqc##idx##_data,		\
 					  sizeof(struct renesas_irqc_config))
 
-void __init r8a7790_add_standard_devices(void)
+static const struct resource thermal_resources[] __initconst = {
+	DEFINE_RES_MEM(0xe61f0000, 0x14),
+	DEFINE_RES_MEM(0xe61f0100, 0x38),
+	DEFINE_RES_IRQ(gic_spi(69)),
+};
+
+#define r8a7790_register_thermal()					\
+	platform_device_register_simple("rcar_thermal", -1,		\
+					thermal_resources,		\
+					ARRAY_SIZE(thermal_resources))
+
+static const struct sh_timer_config cmt00_platform_data __initconst = {
+	.name = "CMT00",
+	.timer_bit = 0,
+	.clockevent_rating = 80,
+};
+
+static const struct resource cmt00_resources[] __initconst = {
+	DEFINE_RES_MEM(0xffca0510, 0x0c),
+	DEFINE_RES_MEM(0xffca0500, 0x04),
+	DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */
+};
+
+#define r8a7790_register_cmt(idx)					\
+	platform_device_register_resndata(&platform_bus, "sh_cmt",	\
+					  idx, cmt##idx##_resources,	\
+					  ARRAY_SIZE(cmt##idx##_resources), \
+					  &cmt##idx##_platform_data,	\
+					  sizeof(struct sh_timer_config))
+
+void __init r8a7790_add_dt_devices(void)
 {
 	r8a7790_register_scif(SCIFA0);
 	r8a7790_register_scif(SCIFA1);
@@ -161,36 +192,34 @@ void __init r8a7790_add_standard_devices(void)
 	r8a7790_register_scif(SCIF1);
 	r8a7790_register_scif(HSCIF0);
 	r8a7790_register_scif(HSCIF1);
-	r8a7790_register_irqc(0);
+	r8a7790_register_cmt(00);
 }
 
-void __init r8a7790_timer_init(void)
+void __init r8a7790_add_standard_devices(void)
 {
-	void __iomem *cntcr;
-
-	/* make sure arch timer is started by setting bit 0 of CNTCT */
-	cntcr = ioremap(0xe6080000, PAGE_SIZE);
-	iowrite32(1, cntcr);
-	iounmap(cntcr);
-
-	shmobile_timer_init();
+	r8a7790_add_dt_devices();
+	r8a7790_register_irqc(0);
+	r8a7790_register_thermal();
 }
 
-#ifdef CONFIG_USE_OF
-void __init r8a7790_add_standard_devices_dt(void)
+void __init r8a7790_init_early(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+#ifndef CONFIG_ARM_ARCH_TIMER
+	shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
+#endif
 }
 
-static const char *r8a7790_boards_compat_dt[] __initdata = {
+#ifdef CONFIG_USE_OF
+
+static const char * const r8a7790_boards_compat_dt[] __initconst = {
 	"renesas,r8a7790",
 	NULL,
 };
 
 DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
-	.init_irq	= irqchip_init,
-	.init_machine	= r8a7790_add_standard_devices_dt,
-	.init_time	= r8a7790_timer_init,
+	.smp		= smp_ops(r8a7790_smp_ops),
+	.init_early	= r8a7790_init_early,
+	.init_time	= rcar_gen2_timer_init,
 	.dt_compat	= r8a7790_boards_compat_dt,
 MACHINE_END
 #endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
new file mode 100644
index 0000000..d9393d6
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -0,0 +1,184 @@
+/*
+ * r8a7791 processor support
+ *
+ * Copyright (C) 2013  Renesas Electronics Corporation
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <linux/platform_data/irq-renesas-irqc.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/r8a7791.h>
+#include <mach/rcar-gen2.h>
+#include <asm/mach/arch.h>
+
+#define SCIF_COMMON(scif_type, baseaddr, irq)			\
+	.type		= scif_type,				\
+	.mapbase	= baseaddr,				\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,	\
+	.irqs		= SCIx_IRQ_MUXED(irq)
+
+#define SCIFA_DATA(index, baseaddr, irq)		\
+[index] = {						\
+	SCIF_COMMON(PORT_SCIFA, baseaddr, irq),		\
+	.scbrr_algo_id	= SCBRR_ALGO_4,			\
+	.scscr = SCSCR_RE | SCSCR_TE,	\
+}
+
+#define SCIFB_DATA(index, baseaddr, irq)	\
+[index] = {					\
+	SCIF_COMMON(PORT_SCIFB, baseaddr, irq),	\
+	.scbrr_algo_id	= SCBRR_ALGO_4,		\
+	.scscr = SCSCR_RE | SCSCR_TE,		\
+}
+
+#define SCIF_DATA(index, baseaddr, irq)		\
+[index] = {						\
+	SCIF_COMMON(PORT_SCIF, baseaddr, irq),		\
+	.scbrr_algo_id	= SCBRR_ALGO_2,			\
+	.scscr = SCSCR_RE | SCSCR_TE,	\
+}
+
+#define HSCIF_DATA(index, baseaddr, irq)		\
+[index] = {						\
+	SCIF_COMMON(PORT_HSCIF, baseaddr, irq),		\
+	.scbrr_algo_id	= SCBRR_ALGO_6,			\
+	.scscr = SCSCR_RE | SCSCR_TE,	\
+}
+
+enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1,
+	SCIF2, SCIF3, SCIF4, SCIF5, SCIFA3, SCIFA4, SCIFA5 };
+
+static const struct plat_sci_port scif[] __initconst = {
+	SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
+	SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
+	SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
+	SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */
+	SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */
+	SCIFA_DATA(SCIFA2, 0xe6c60000, gic_spi(151)), /* SCIFA2 */
+	SCIF_DATA(SCIF0, 0xe6e60000, gic_spi(152)), /* SCIF0 */
+	SCIF_DATA(SCIF1, 0xe6e68000, gic_spi(153)), /* SCIF1 */
+	SCIF_DATA(SCIF2, 0xe6e58000, gic_spi(22)), /* SCIF2 */
+	SCIF_DATA(SCIF3, 0xe6ea8000, gic_spi(23)), /* SCIF3 */
+	SCIF_DATA(SCIF4, 0xe6ee0000, gic_spi(24)), /* SCIF4 */
+	SCIF_DATA(SCIF5, 0xe6ee8000, gic_spi(25)), /* SCIF5 */
+	SCIFA_DATA(SCIFA3, 0xe6c70000, gic_spi(29)), /* SCIFA3 */
+	SCIFA_DATA(SCIFA4, 0xe6c78000, gic_spi(30)), /* SCIFA4 */
+	SCIFA_DATA(SCIFA5, 0xe6c80000, gic_spi(31)), /* SCIFA5 */
+};
+
+static inline void r8a7791_register_scif(int idx)
+{
+	platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
+				      sizeof(struct plat_sci_port));
+}
+
+static const struct sh_timer_config cmt00_platform_data __initconst = {
+	.name = "CMT00",
+	.timer_bit = 0,
+	.clockevent_rating = 80,
+};
+
+static const struct resource cmt00_resources[] __initconst = {
+	DEFINE_RES_MEM(0xffca0510, 0x0c),
+	DEFINE_RES_MEM(0xffca0500, 0x04),
+	DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */
+};
+
+#define r8a7791_register_cmt(idx)					\
+	platform_device_register_resndata(&platform_bus, "sh_cmt",	\
+					  idx, cmt##idx##_resources,	\
+					  ARRAY_SIZE(cmt##idx##_resources), \
+					  &cmt##idx##_platform_data,	\
+					  sizeof(struct sh_timer_config))
+
+static struct renesas_irqc_config irqc0_data = {
+	.irq_base = irq_pin(0), /* IRQ0 -> IRQ9 */
+};
+
+static struct resource irqc0_resources[] = {
+	DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */
+	DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */
+	DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */
+	DEFINE_RES_IRQ(gic_spi(2)), /* IRQ2 */
+	DEFINE_RES_IRQ(gic_spi(3)), /* IRQ3 */
+	DEFINE_RES_IRQ(gic_spi(12)), /* IRQ4 */
+	DEFINE_RES_IRQ(gic_spi(13)), /* IRQ5 */
+	DEFINE_RES_IRQ(gic_spi(14)), /* IRQ6 */
+	DEFINE_RES_IRQ(gic_spi(15)), /* IRQ7 */
+	DEFINE_RES_IRQ(gic_spi(16)), /* IRQ8 */
+	DEFINE_RES_IRQ(gic_spi(17)), /* IRQ9 */
+};
+
+#define r8a7791_register_irqc(idx)					\
+	platform_device_register_resndata(&platform_bus, "renesas_irqc", \
+					  idx, irqc##idx##_resources,	\
+					  ARRAY_SIZE(irqc##idx##_resources), \
+					  &irqc##idx##_data,		\
+					  sizeof(struct renesas_irqc_config))
+
+void __init r8a7791_add_dt_devices(void)
+{
+	r8a7791_register_scif(SCIFA0);
+	r8a7791_register_scif(SCIFA1);
+	r8a7791_register_scif(SCIFB0);
+	r8a7791_register_scif(SCIFB1);
+	r8a7791_register_scif(SCIFB2);
+	r8a7791_register_scif(SCIFA2);
+	r8a7791_register_scif(SCIF0);
+	r8a7791_register_scif(SCIF1);
+	r8a7791_register_scif(SCIF2);
+	r8a7791_register_scif(SCIF3);
+	r8a7791_register_scif(SCIF4);
+	r8a7791_register_scif(SCIF5);
+	r8a7791_register_scif(SCIFA3);
+	r8a7791_register_scif(SCIFA4);
+	r8a7791_register_scif(SCIFA5);
+	r8a7791_register_cmt(00);
+}
+
+void __init r8a7791_add_standard_devices(void)
+{
+	r8a7791_add_dt_devices();
+	r8a7791_register_irqc(0);
+}
+
+void __init r8a7791_init_early(void)
+{
+#ifndef CONFIG_ARM_ARCH_TIMER
+	shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
+#endif
+}
+
+#ifdef CONFIG_USE_OF
+static const char *r8a7791_boards_compat_dt[] __initdata = {
+	"renesas,r8a7791",
+	NULL,
+};
+
+DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)")
+	.smp		= smp_ops(r8a7791_smp_ops),
+	.init_early	= r8a7791_init_early,
+	.init_time	= rcar_gen2_timer_init,
+	.dt_compat	= r8a7791_boards_compat_dt,
+MACHINE_END
+#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
new file mode 100644
index 0000000..5734c24
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -0,0 +1,91 @@
+/*
+ * R-Car Generation 2 support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/clocksource.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <mach/common.h>
+#include <mach/rcar-gen2.h>
+#include <asm/mach/arch.h>
+
+#define MODEMR 0xe6160060
+
+u32 __init rcar_gen2_read_mode_pins(void)
+{
+	void __iomem *modemr = ioremap_nocache(MODEMR, 4);
+	u32 mode;
+
+	BUG_ON(!modemr);
+	mode = ioread32(modemr);
+	iounmap(modemr);
+
+	return mode;
+}
+
+#define CNTCR 0
+#define CNTFID0 0x20
+
+void __init rcar_gen2_timer_init(void)
+{
+#ifdef CONFIG_ARM_ARCH_TIMER
+	u32 mode = rcar_gen2_read_mode_pins();
+	void __iomem *base;
+	int extal_mhz = 0;
+	u32 freq;
+
+	/* At Linux boot time the r8a7790 arch timer comes up
+	 * with the counter disabled. Moreover, it may also report
+	 * a potentially incorrect fixed 13 MHz frequency. To be
+	 * correct these registers need to be updated to use the
+	 * frequency EXTAL / 2 which can be determined by the MD pins.
+	 */
+
+	switch (mode & (MD(14) | MD(13))) {
+	case 0:
+		extal_mhz = 15;
+		break;
+	case MD(13):
+		extal_mhz = 20;
+		break;
+	case MD(14):
+		extal_mhz = 26;
+		break;
+	case MD(13) | MD(14):
+		extal_mhz = 30;
+		break;
+	}
+
+	/* The arch timer frequency equals EXTAL / 2 */
+	freq = extal_mhz * (1000000 / 2);
+
+	/* Remap "armgcnt address map" space */
+	base = ioremap(0xe6080000, PAGE_SIZE);
+
+	/* Update registers with correct frequency */
+	iowrite32(freq, base + CNTFID0);
+	asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
+
+	/* make sure arch timer is started by setting bit 0 of CNTCR */
+	iowrite32(1, base + CNTCR);
+	iounmap(base);
+#endif /* CONFIG_ARM_ARCH_TIMER */
+
+	clocksource_of_init();
+}
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 5502d62..3118783 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -35,7 +35,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_data/sh_ipmmu.h>
 #include <mach/dma-register.h>
-#include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/sh7372.h>
 #include <mach/common.h>
@@ -1147,10 +1146,6 @@ void __init sh7372_add_early_devices_dt(void)
 	shmobile_setup_console();
 }
 
-static const struct of_dev_auxdata sh7372_auxdata_lookup[] __initconst = {
-	{ }
-};
-
 void __init sh7372_add_standard_devices_dt(void)
 {
 	/* clocks are setup late during boot in the case of DT */
@@ -1159,8 +1154,7 @@ void __init sh7372_add_standard_devices_dt(void)
 	platform_add_devices(sh7372_early_devices,
 			    ARRAY_SIZE(sh7372_early_devices));
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     sh7372_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char *sh7372_boards_compat_dt[] __initdata = {
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index 96e7ca1..22de174 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -22,7 +22,6 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/irqchip.h>
 #include <linux/platform_device.h>
 #include <linux/of_platform.h>
 #include <linux/delay.h>
@@ -35,7 +34,6 @@
 #include <linux/platform_data/sh_ipmmu.h>
 #include <linux/platform_data/irq-renesas-intc-irqpin.h>
 #include <mach/dma-register.h>
-#include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/sh73a0.h>
 #include <mach/common.h>
@@ -61,29 +59,16 @@ void __init sh73a0_map_io(void)
 	iotable_init(sh73a0_io_desc, ARRAY_SIZE(sh73a0_io_desc));
 }
 
-static struct resource sh73a0_pfc_resources[] = {
-	[0] = {
-		.start	= 0xe6050000,
-		.end	= 0xe6057fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0xe605801c,
-		.end	= 0xe6058027,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device sh73a0_pfc_device = {
-	.name		= "pfc-sh73a0",
-	.id		= -1,
-	.resource	= sh73a0_pfc_resources,
-	.num_resources	= ARRAY_SIZE(sh73a0_pfc_resources),
+/* PFC */
+static struct resource pfc_resources[] __initdata = {
+	DEFINE_RES_MEM(0xe6050000, 0x8000),
+	DEFINE_RES_MEM(0xe605801c, 0x000c),
 };
 
 void __init sh73a0_pinmux_init(void)
 {
-	platform_device_register(&sh73a0_pfc_device);
+	platform_device_register_simple("pfc-sh73a0", -1, pfc_resources,
+					ARRAY_SIZE(pfc_resources));
 }
 
 static struct plat_sci_port scif0_platform_data = {
@@ -958,10 +943,6 @@ void __init sh73a0_add_early_devices(void)
 
 #ifdef CONFIG_USE_OF
 
-static const struct of_dev_auxdata sh73a0_auxdata_lookup[] __initconst = {
-	{},
-};
-
 void __init sh73a0_add_standard_devices_dt(void)
 {
 	struct platform_device_info devinfo = { .name = "cpufreq-cpu0", .id = -1, };
@@ -971,8 +952,7 @@ void __init sh73a0_add_standard_devices_dt(void)
 
 	platform_add_devices(sh73a0_devices_dt,
 			     ARRAY_SIZE(sh73a0_devices_dt));
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     sh73a0_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 
 	/* Instantiate cpufreq-cpu0 */
 	platform_device_register_full(&devinfo);
@@ -988,7 +968,6 @@ DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)")
 	.map_io		= sh73a0_map_io,
 	.init_early	= sh73a0_init_delay,
 	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= irqchip_init,
 	.init_machine	= sh73a0_add_standard_devices_dt,
 	.dt_compat	= sh73a0_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/sleep-sh7372.S b/arch/arm/mach-shmobile/sleep-sh7372.S
index 53f4840..9782862 100644
--- a/arch/arm/mach-shmobile/sleep-sh7372.S
+++ b/arch/arm/mach-shmobile/sleep-sh7372.S
@@ -41,6 +41,7 @@
 sh7372_resume_core_standby_sysc:
 	ldr     pc, 1f
 
+	.align	2
 	.globl	sh7372_cpu_resume
 sh7372_cpu_resume:
 1:	.space	4
@@ -96,6 +97,7 @@ sh7372_do_idle_sysc:
 1:
 	b      1b
 
+	.align	2
 kernel_flush:
 	.word v7_flush_dcache_all
 #endif
diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
index 22a05a8..f2ca923 100644
--- a/arch/arm/mach-shmobile/smp-emev2.c
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -29,6 +29,8 @@
 #include <asm/smp_scu.h>
 
 #define EMEV2_SCU_BASE 0x1e000000
+#define EMEV2_SMU_BASE 0xe0110000
+#define SMU_GENERAL_REG0 0x7c0
 
 static int emev2_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
@@ -38,32 +40,21 @@ static int emev2_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static void __init emev2_smp_prepare_cpus(unsigned int max_cpus)
 {
-	scu_enable(shmobile_scu_base);
+	void __iomem *smu;
 
-	/* Tell ROM loader about our vector (in headsmp-scu.S, headsmp.S) */
-	emev2_set_boot_vector(__pa(shmobile_boot_vector));
-	shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
-	shmobile_boot_arg = (unsigned long)shmobile_scu_base;
+	/* Tell ROM loader about our vector (in headsmp.S) */
+	smu = ioremap(EMEV2_SMU_BASE, PAGE_SIZE);
+	if (smu) {
+		iowrite32(__pa(shmobile_boot_vector), smu + SMU_GENERAL_REG0);
+		iounmap(smu);
+	}
 
-	/* enable cache coherency on booting CPU */
-	scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
-}
-
-static void __init emev2_smp_init_cpus(void)
-{
-	unsigned int ncores;
-
-	/* setup EMEV2 specific SCU base */
+	/* setup EMEV2 specific SCU bits */
 	shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE);
-	emev2_clock_init(); /* need ioremapped SMU */
-
-	ncores = shmobile_scu_base ? scu_get_core_count(shmobile_scu_base) : 1;
-
-	shmobile_smp_init_cpus(ncores);
+	shmobile_smp_scu_prepare_cpus(max_cpus);
 }
 
 struct smp_operations emev2_smp_ops __initdata = {
-	.smp_init_cpus		= emev2_smp_init_cpus,
 	.smp_prepare_cpus	= emev2_smp_prepare_cpus,
 	.smp_boot_secondary	= emev2_boot_secondary,
 };
diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index 9bdf810..627c1f0 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -84,30 +84,30 @@ static int r8a7779_platform_cpu_kill(unsigned int cpu)
 static int r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	struct r8a7779_pm_ch *ch = NULL;
-	int ret = -EIO;
+	unsigned int lcpu = cpu_logical_map(cpu);
+	int ret;
 
-	cpu = cpu_logical_map(cpu);
-
-	if (cpu < ARRAY_SIZE(r8a7779_ch_cpu))
-		ch = r8a7779_ch_cpu[cpu];
+	if (lcpu < ARRAY_SIZE(r8a7779_ch_cpu))
+		ch = r8a7779_ch_cpu[lcpu];
 
 	if (ch)
 		ret = r8a7779_sysc_power_up(ch);
+	else
+		ret = -EIO;
 
 	return ret;
 }
 
 static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus)
 {
-	scu_enable(shmobile_scu_base);
-
 	/* Map the reset vector (in headsmp-scu.S, headsmp.S) */
 	__raw_writel(__pa(shmobile_boot_vector), AVECR);
 	shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
 	shmobile_boot_arg = (unsigned long)shmobile_scu_base;
 
-	/* enable cache coherency on booting CPU */
-	scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
+	/* setup r8a7779 specific SCU bits */
+	shmobile_scu_base = IOMEM(R8A7779_SCU_BASE);
+	shmobile_smp_scu_prepare_cpus(max_cpus);
 
 	r8a7779_pm_init();
 
@@ -117,56 +117,15 @@ static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus)
 	r8a7779_platform_cpu_kill(3);
 }
 
-static void __init r8a7779_smp_init_cpus(void)
-{
-	/* setup r8a7779 specific SCU base */
-	shmobile_scu_base = IOMEM(R8A7779_SCU_BASE);
-
-	shmobile_smp_init_cpus(scu_get_core_count(shmobile_scu_base));
-}
-
 #ifdef CONFIG_HOTPLUG_CPU
-static int r8a7779_scu_psr_core_disabled(int cpu)
-{
-	unsigned long mask = 3 << (cpu * 8);
-
-	if ((__raw_readl(shmobile_scu_base + 8) & mask) == mask)
-		return 1;
-
-	return 0;
-}
-
 static int r8a7779_cpu_kill(unsigned int cpu)
 {
-	int k;
-
-	/* this function is running on another CPU than the offline target,
-	 * here we need wait for shutdown code in platform_cpu_die() to
-	 * finish before asking SoC-specific code to power off the CPU core.
-	 */
-	for (k = 0; k < 1000; k++) {
-		if (r8a7779_scu_psr_core_disabled(cpu))
-			return r8a7779_platform_cpu_kill(cpu);
-
-		mdelay(1);
-	}
+	if (shmobile_smp_scu_cpu_kill(cpu))
+		return r8a7779_platform_cpu_kill(cpu);
 
 	return 0;
 }
 
-static void r8a7779_cpu_die(unsigned int cpu)
-{
-	dsb();
-	flush_cache_all();
-
-	/* disable cache coherency */
-	scu_power_mode(shmobile_scu_base, SCU_PM_POWEROFF);
-
-	/* Endless loop until power off from r8a7779_cpu_kill() */
-	while (1)
-		cpu_do_idle();
-}
-
 static int r8a7779_cpu_disable(unsigned int cpu)
 {
 	/* only CPU1->3 have power domains, do not allow hotplug of CPU0 */
@@ -175,12 +134,11 @@ static int r8a7779_cpu_disable(unsigned int cpu)
 #endif /* CONFIG_HOTPLUG_CPU */
 
 struct smp_operations r8a7779_smp_ops  __initdata = {
-	.smp_init_cpus		= r8a7779_smp_init_cpus,
 	.smp_prepare_cpus	= r8a7779_smp_prepare_cpus,
 	.smp_boot_secondary	= r8a7779_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
-	.cpu_kill		= r8a7779_cpu_kill,
-	.cpu_die		= r8a7779_cpu_die,
 	.cpu_disable		= r8a7779_cpu_disable,
+	.cpu_die		= shmobile_smp_scu_cpu_die,
+	.cpu_kill		= r8a7779_cpu_kill,
 #endif
 };
diff --git a/arch/arm/mach-shmobile/smp-r8a7790.c b/arch/arm/mach-shmobile/smp-r8a7790.c
new file mode 100644
index 0000000..015e275
--- /dev/null
+++ b/arch/arm/mach-shmobile/smp-r8a7790.c
@@ -0,0 +1,67 @@
+/*
+ * SMP support for r8a7790
+ *
+ * Copyright (C) 2012-2013 Renesas Solutions Corp.
+ * Copyright (C) 2012 Takashi Yoshii <takashi.yoshii.ze@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <asm/smp_plat.h>
+#include <mach/common.h>
+
+#define RST		0xe6160000
+#define CA15BAR		0x0020
+#define CA7BAR		0x0030
+#define CA15RESCNT	0x0040
+#define CA7RESCNT	0x0044
+#define MERAM		0xe8080000
+
+static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus)
+{
+	void __iomem *p;
+	u32 bar;
+
+	/* let APMU code install data related to shmobile_boot_vector */
+	shmobile_smp_apmu_prepare_cpus(max_cpus);
+
+	/* MERAM for jump stub, because BAR requires 256KB aligned address */
+	p = ioremap_nocache(MERAM, shmobile_boot_size);
+	memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+	iounmap(p);
+
+	/* setup reset vectors */
+	p = ioremap_nocache(RST, 0x63);
+	bar = (MERAM >> 8) & 0xfffffc00;
+	writel_relaxed(bar, p + CA15BAR);
+	writel_relaxed(bar, p + CA7BAR);
+	writel_relaxed(bar | 0x10, p + CA15BAR);
+	writel_relaxed(bar | 0x10, p + CA7BAR);
+
+	/* enable clocks to all CPUs */
+	writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000,
+		       p + CA15RESCNT);
+	writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) | 0x5a5a0000,
+		       p + CA7RESCNT);
+	iounmap(p);
+}
+
+struct smp_operations r8a7790_smp_ops __initdata = {
+	.smp_prepare_cpus	= r8a7790_smp_prepare_cpus,
+	.smp_boot_secondary	= shmobile_smp_apmu_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_disable		= shmobile_smp_cpu_disable,
+	.cpu_die		= shmobile_smp_apmu_cpu_die,
+	.cpu_kill		= shmobile_smp_apmu_cpu_kill,
+#endif
+};
diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c
new file mode 100644
index 0000000..2df5bd1
--- /dev/null
+++ b/arch/arm/mach-shmobile/smp-r8a7791.c
@@ -0,0 +1,62 @@
+/*
+ * SMP support for r8a7791
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <asm/smp_plat.h>
+#include <mach/common.h>
+#include <mach/r8a7791.h>
+
+#define RST		0xe6160000
+#define CA15BAR		0x0020
+#define CA15RESCNT	0x0040
+#define RAM		0xe6300000
+
+static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus)
+{
+	void __iomem *p;
+	u32 bar;
+
+	/* let APMU code install data related to shmobile_boot_vector */
+	shmobile_smp_apmu_prepare_cpus(max_cpus);
+
+	/* RAM for jump stub, because BAR requires 256KB aligned address */
+	p = ioremap_nocache(RAM, shmobile_boot_size);
+	memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+	iounmap(p);
+
+	/* setup reset vectors */
+	p = ioremap_nocache(RST, 0x63);
+	bar = (RAM >> 8) & 0xfffffc00;
+	writel_relaxed(bar, p + CA15BAR);
+	writel_relaxed(bar | 0x10, p + CA15BAR);
+
+	/* enable clocks to all CPUs */
+	writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000,
+		       p + CA15RESCNT);
+	iounmap(p);
+}
+
+struct smp_operations r8a7791_smp_ops __initdata = {
+	.smp_prepare_cpus	= r8a7791_smp_prepare_cpus,
+	.smp_boot_secondary	= shmobile_smp_apmu_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_disable		= shmobile_smp_cpu_disable,
+	.cpu_die		= shmobile_smp_apmu_cpu_die,
+	.cpu_kill		= shmobile_smp_apmu_cpu_kill,
+#endif
+};
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index d5fc3ed..13ba36a 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -20,14 +20,11 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/smp.h>
-#include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <mach/common.h>
-#include <asm/cacheflush.h>
-#include <asm/smp_plat.h>
 #include <mach/sh73a0.h>
-#include <asm/smp_scu.h>
+#include <asm/smp_plat.h>
 #include <asm/smp_twd.h>
 
 #define WUPCR		IOMEM(0xe6151010)
@@ -36,8 +33,6 @@
 #define SBAR		IOMEM(0xe6180020)
 #define APARMBAREA	IOMEM(0xe6f10020)
 
-#define PSTR_SHUTDOWN_MODE	3
-
 #define SH73A0_SCU_BASE 0xf0000000
 
 #ifdef CONFIG_HAVE_ARM_TWD
@@ -50,82 +45,33 @@ void __init sh73a0_register_twd(void)
 
 static int sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	cpu = cpu_logical_map(cpu);
+	unsigned int lcpu = cpu_logical_map(cpu);
 
-	if (((__raw_readl(PSTR) >> (4 * cpu)) & 3) == 3)
-		__raw_writel(1 << cpu, WUPCR);	/* wake up */
+	if (((__raw_readl(PSTR) >> (4 * lcpu)) & 3) == 3)
+		__raw_writel(1 << lcpu, WUPCR);	/* wake up */
 	else
-		__raw_writel(1 << cpu, SRESCR);	/* reset */
+		__raw_writel(1 << lcpu, SRESCR);	/* reset */
 
 	return 0;
 }
 
 static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
 {
-	scu_enable(shmobile_scu_base);
-
-	/* Map the reset vector (in headsmp-scu.S, headsmp.S) */
+	/* Map the reset vector (in headsmp.S) */
 	__raw_writel(0, APARMBAREA);      /* 4k */
 	__raw_writel(__pa(shmobile_boot_vector), SBAR);
-	shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
-	shmobile_boot_arg = (unsigned long)shmobile_scu_base;
-
-	/* enable cache coherency on booting CPU */
-	scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
-}
 
-static void __init sh73a0_smp_init_cpus(void)
-{
-	/* setup sh73a0 specific SCU base */
+	/* setup sh73a0 specific SCU bits */
 	shmobile_scu_base = IOMEM(SH73A0_SCU_BASE);
-
-	shmobile_smp_init_cpus(scu_get_core_count(shmobile_scu_base));
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-static int sh73a0_cpu_kill(unsigned int cpu)
-{
-
-	int k;
-	u32 pstr;
-
-	/*
-	 * wait until the power status register confirms the shutdown of the
-	 * offline target
-	 */
-	for (k = 0; k < 1000; k++) {
-		pstr = (__raw_readl(PSTR) >> (4 * cpu)) & 3;
-		if (pstr == PSTR_SHUTDOWN_MODE)
-			return 1;
-
-		mdelay(1);
-	}
-
-	return 0;
-}
-
-static void sh73a0_cpu_die(unsigned int cpu)
-{
-	/* Set power off mode. This takes the CPU out of the MP cluster */
-	scu_power_mode(shmobile_scu_base, SCU_PM_POWEROFF);
-
-	/* Enter shutdown mode */
-	cpu_do_idle();
-}
-
-static int sh73a0_cpu_disable(unsigned int cpu)
-{
-	return 0; /* CPU0 and CPU1 supported */
+	shmobile_smp_scu_prepare_cpus(max_cpus);
 }
-#endif /* CONFIG_HOTPLUG_CPU */
 
 struct smp_operations sh73a0_smp_ops __initdata = {
-	.smp_init_cpus		= sh73a0_smp_init_cpus,
 	.smp_prepare_cpus	= sh73a0_smp_prepare_cpus,
 	.smp_boot_secondary	= sh73a0_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
-	.cpu_kill		= sh73a0_cpu_kill,
-	.cpu_die		= sh73a0_cpu_die,
-	.cpu_disable		= sh73a0_cpu_disable,
+	.cpu_disable		= shmobile_smp_cpu_disable,
+	.cpu_die		= shmobile_smp_scu_cpu_die,
+	.cpu_kill		= shmobile_smp_scu_cpu_kill,
 #endif
 };
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index f321dbe..62d7052 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -59,7 +59,3 @@ void __init shmobile_earlytimer_init(void)
 	late_time_init = shmobile_late_time_init;
 }
 
-void __init shmobile_timer_init(void)
-{
-	clocksource_of_init();
-}
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index dd86db4..037100a 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -4,7 +4,6 @@ config ARCH_SOCFPGA
 	select ARM_AMBA
 	select ARM_GIC
 	select CACHE_L2X0
-	select CLKDEV_LOOKUP
 	select COMMON_CLK
 	select CPU_V7
 	select DW_APB_TIMER_OF
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
index bfce964..dd0d49c 100644
--- a/arch/arm/mach-socfpga/socfpga.c
+++ b/arch/arm/mach-socfpga/socfpga.c
@@ -14,7 +14,6 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include <linux/clk-provider.h>
 #include <linux/irqchip.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
@@ -107,7 +106,6 @@ static void __init socfpga_cyclone5_init(void)
 {
 	l2x0_of_init(0, ~0UL);
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-	of_clk_init(NULL);
 	socfpga_init_clocks();
 }
 
diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index 442917e..ac1710e6 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -7,11 +7,9 @@ menuconfig PLAT_SPEAR
 	default PLAT_SPEAR_SINGLE
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
-	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
 
 if PLAT_SPEAR
 
@@ -23,7 +21,7 @@ config ARCH_SPEAR13XX
 	select CPU_V7
 	select GPIO_SPEAR_SPICS
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
diff --git a/arch/arm/mach-spear/include/mach/debug-macro.S b/arch/arm/mach-spear/include/mach/debug-macro.S
deleted file mode 100644
index 75b05ad..0000000
--- a/arch/arm/mach-spear/include/mach/debug-macro.S
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/debug-macro.S
- *
- * Debugging macro include header for spear platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/amba/serial.h>
-#include <mach/spear.h>
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #SPEAR_DBG_UART_BASE		@ Physical base
-		mov	\rv, #VA_SPEAR_DBG_UART_BASE		@ Virtual base
-		.endm
-
-		.macro	senduart, rd, rx
-		strb	\rd, [\rx, #UART01x_DR]			@ ASC_TX_BUFFER
-		.endm
-
-		.macro	waituart, rd, rx
-1001:		ldr	\rd, [\rx, #UART01x_FR]			@ FLAG REGISTER
-		tst	\rd, #UART01x_FR_TXFF			@ TX_FULL
-		bne	1001b
-		.endm
-
-		.macro	busyuart, rd, rx
-1002:		ldr	\rd, [\rx, #UART01x_FR]			@ FLAG REGISTER
-		tst	\rd, #UART011_FR_TXFE			@ TX_EMPTY
-		beq	1002b
-		.endm
diff --git a/arch/arm/mach-spear/include/mach/spear.h b/arch/arm/mach-spear/include/mach/spear.h
index cf3a536..5cdc53d 100644
--- a/arch/arm/mach-spear/include/mach/spear.h
+++ b/arch/arm/mach-spear/include/mach/spear.h
@@ -39,7 +39,6 @@
 
 /* Debug uart for linux, will be used for debug and uncompress messages */
 #define SPEAR_DBG_UART_BASE		SPEAR_ICM1_UART_BASE
-#define VA_SPEAR_DBG_UART_BASE		VA_SPEAR_ICM1_UART_BASE
 
 /* Sysctl base for spear platform */
 #define SPEAR_SYS_CTRL_BASE		SPEAR_ICM3_SYS_CTRL_BASE
@@ -86,7 +85,6 @@
 
 /* Debug uart for linux, will be used for debug and uncompress messages */
 #define SPEAR_DBG_UART_BASE			UART_BASE
-#define VA_SPEAR_DBG_UART_BASE			VA_UART_BASE
 
 #endif /* SPEAR13XX */
 
diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c
index 8fe6f0c..1217fb5 100644
--- a/arch/arm/mach-sti/board-dt.c
+++ b/arch/arm/mach-sti/board-dt.c
@@ -7,9 +7,8 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/clk-provider.h>
-#include <linux/clocksource.h>
 #include <linux/irq.h>
+#include <linux/of_platform.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 
@@ -28,11 +27,10 @@ void __init stih41x_l2x0_init(void)
 	l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK);
 }
 
-static void __init stih41x_timer_init(void)
+static void __init stih41x_machine_init(void)
 {
-	of_clk_init(NULL);
-	clocksource_of_init();
 	stih41x_l2x0_init();
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char *stih41x_dt_match[] __initdata = {
@@ -42,7 +40,7 @@ static const char *stih41x_dt_match[] __initdata = {
 };
 
 DT_MACHINE_START(STM, "STiH415/416 SoC with Flattened Device Tree")
-	.init_time	= stih41x_timer_init,
+	.init_machine	= stih41x_machine_init,
 	.smp		= smp_ops(sti_smp_ops),
 	.dt_compat	= stih41x_dt_match,
 MACHINE_END
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 5b045e3..c9e72c8 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -1,12 +1,14 @@
 config ARCH_SUNXI
 	bool "Allwinner A1X SOCs" if ARCH_MULTI_V7
 	select ARCH_REQUIRE_GPIOLIB
+	select ARM_GIC
 	select CLKSRC_MMIO
 	select CLKSRC_OF
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
+	select HAVE_SMP
 	select PINCTRL
+	select PINCTRL_SUNXI
 	select SPARSE_IRQ
 	select SUN4I_TIMER
-	select PINCTRL_SUNXI
diff --git a/arch/arm/mach-sunxi/Makefile.boot b/arch/arm/mach-sunxi/Makefile.boot
deleted file mode 100644
index 46d4cf0..0000000
--- a/arch/arm/mach-sunxi/Makefile.boot
+++ /dev/null
@@ -1 +0,0 @@
-zreladdr-$(CONFIG_ARCH_SUNXI)	+= 0x40008000
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 38a3c55..61d3a38 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -10,7 +10,6 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/clocksource.h>
 #include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -20,17 +19,24 @@
 #include <linux/io.h>
 #include <linux/reboot.h>
 
-#include <linux/clk/sunxi.h>
-
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/system_misc.h>
 
 #define SUN4I_WATCHDOG_CTRL_REG		0x00
-#define SUN4I_WATCHDOG_CTRL_RESTART		(1 << 0)
+#define SUN4I_WATCHDOG_CTRL_RESTART		BIT(0)
 #define SUN4I_WATCHDOG_MODE_REG		0x04
-#define SUN4I_WATCHDOG_MODE_ENABLE		(1 << 0)
-#define SUN4I_WATCHDOG_MODE_RESET_ENABLE	(1 << 1)
+#define SUN4I_WATCHDOG_MODE_ENABLE		BIT(0)
+#define SUN4I_WATCHDOG_MODE_RESET_ENABLE	BIT(1)
+
+#define SUN6I_WATCHDOG1_IRQ_REG		0x00
+#define SUN6I_WATCHDOG1_CTRL_REG	0x10
+#define SUN6I_WATCHDOG1_CTRL_RESTART		BIT(0)
+#define SUN6I_WATCHDOG1_CONFIG_REG	0x14
+#define SUN6I_WATCHDOG1_CONFIG_RESTART		BIT(0)
+#define SUN6I_WATCHDOG1_CONFIG_IRQ		BIT(1)
+#define SUN6I_WATCHDOG1_MODE_REG	0x18
+#define SUN6I_WATCHDOG1_MODE_ENABLE		BIT(0)
 
 static void __iomem *wdt_base;
 
@@ -56,14 +62,41 @@ static void sun4i_restart(enum reboot_mode mode, const char *cmd)
 	}
 }
 
+static void sun6i_restart(enum reboot_mode mode, const char *cmd)
+{
+	if (!wdt_base)
+		return;
+
+	/* Disable interrupts */
+	writel(0, wdt_base + SUN6I_WATCHDOG1_IRQ_REG);
+
+	/* We want to disable the IRQ and just reset the whole system */
+	writel(SUN6I_WATCHDOG1_CONFIG_RESTART,
+		wdt_base + SUN6I_WATCHDOG1_CONFIG_REG);
+
+	/* Enable timer. The default and lowest interval value is 0.5s */
+	writel(SUN6I_WATCHDOG1_MODE_ENABLE,
+		wdt_base + SUN6I_WATCHDOG1_MODE_REG);
+
+	/* Restart the watchdog. */
+	writel(SUN6I_WATCHDOG1_CTRL_RESTART,
+		wdt_base + SUN6I_WATCHDOG1_CTRL_REG);
+
+	while (1) {
+		mdelay(5);
+		writel(SUN6I_WATCHDOG1_MODE_ENABLE,
+			wdt_base + SUN6I_WATCHDOG1_MODE_REG);
+	}
+}
+
 static struct of_device_id sunxi_restart_ids[] = {
-	{ .compatible = "allwinner,sun4i-wdt", .data = sun4i_restart },
+	{ .compatible = "allwinner,sun4i-wdt" },
+	{ .compatible = "allwinner,sun6i-wdt" },
 	{ /*sentinel*/ }
 };
 
 static void sunxi_setup_restart(void)
 {
-	const struct of_device_id *of_id;
 	struct device_node *np;
 
 	np = of_find_matching_node(NULL, sunxi_restart_ids);
@@ -72,17 +105,6 @@ static void sunxi_setup_restart(void)
 
 	wdt_base = of_iomap(np, 0);
 	WARN(!wdt_base, "failed to map watchdog base address");
-
-	of_id = of_match_node(sunxi_restart_ids, np);
-	WARN(!of_id, "restart function not available");
-
-	arm_pm_restart = of_id->data;
-}
-
-static void __init sunxi_timer_init(void)
-{
-	sunxi_init_clocks();
-	clocksource_of_init();
 }
 
 static void __init sunxi_dt_init(void)
@@ -101,6 +123,28 @@ static const char * const sunxi_board_dt_compat[] = {
 
 DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)")
 	.init_machine	= sunxi_dt_init,
-	.init_time	= sunxi_timer_init,
 	.dt_compat	= sunxi_board_dt_compat,
+	.restart	= sun4i_restart,
+MACHINE_END
+
+static const char * const sun6i_board_dt_compat[] = {
+	"allwinner,sun6i-a31",
+	NULL,
+};
+
+DT_MACHINE_START(SUN6I_DT, "Allwinner sun6i (A31) Family")
+	.init_machine	= sunxi_dt_init,
+	.dt_compat	= sun6i_board_dt_compat,
+	.restart	= sun6i_restart,
+MACHINE_END
+
+static const char * const sun7i_board_dt_compat[] = {
+	"allwinner,sun7i-a20",
+	NULL,
+};
+
+DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family")
+	.init_machine	= sunxi_dt_init,
+	.dt_compat	= sun7i_board_dt_compat,
+	.restart	= sun4i_restart,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index ef3a8da..0bf04a0 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -2,18 +2,23 @@ config ARCH_TEGRA
 	bool "NVIDIA Tegra" if ARCH_MULTI_V7
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
+	select ARM_GIC
 	select CLKSRC_MMIO
 	select CLKSRC_OF
 	select COMMON_CLK
+	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
-	select HAVE_CLK
+	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
+	select MIGHT_HAVE_PCI
+	select PINCTRL
 	select SOC_BUS
 	select SPARSE_IRQ
+	select USB_ARCH_HAS_EHCI if USB_SUPPORT
+	select USB_ULPI if USB_PHY
+	select USB_ULPI_VIEWPORT if USB_PHY
 	select USE_OF
 	help
 	  This enables support for NVIDIA Tegra based systems.
@@ -27,15 +32,9 @@ config ARCH_TEGRA_2x_SOC
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_754327 if SMP
 	select ARM_ERRATA_764369 if SMP
-	select ARM_GIC
-	select CPU_V7
-	select PINCTRL
 	select PINCTRL_TEGRA20
 	select PL310_ERRATA_727915 if CACHE_L2X0
 	select PL310_ERRATA_769419 if CACHE_L2X0
-	select USB_ARCH_HAS_EHCI if USB_SUPPORT
-	select USB_ULPI if USB_PHY
-	select USB_ULPI_VIEWPORT if USB_PHY
 	help
 	  Support for NVIDIA Tegra AP20 and T20 processors, based on the
 	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
@@ -44,34 +43,29 @@ config ARCH_TEGRA_3x_SOC
 	bool "Enable support for Tegra30 family"
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
-	select ARM_GIC
-	select CPU_V7
-	select PINCTRL
 	select PINCTRL_TEGRA30
 	select PL310_ERRATA_769419 if CACHE_L2X0
-	select USB_ARCH_HAS_EHCI if USB_SUPPORT
-	select USB_ULPI if USB_PHY
-	select USB_ULPI_VIEWPORT if USB_PHY
 	help
 	  Support for NVIDIA Tegra T30 processor family, based on the
 	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
 
 config ARCH_TEGRA_114_SOC
 	bool "Enable support for Tegra114 family"
-	select HAVE_ARM_ARCH_TIMER
-	select ARM_GIC
+	select ARM_ERRATA_798181
 	select ARM_L1_CACHE_SHIFT_6
-	select CPU_V7
-	select PINCTRL
+	select HAVE_ARM_ARCH_TIMER
 	select PINCTRL_TEGRA114
 	help
 	  Support for NVIDIA Tegra T114 processor family, based on the
 	  ARM CortexA15MP CPU
 
-config TEGRA_PCI
-	bool "PCI Express support"
-	depends on ARCH_TEGRA_2x_SOC
-	select PCI
+config ARCH_TEGRA_124_SOC
+	bool "Enable support for Tegra124 family"
+	select ARM_L1_CACHE_SHIFT_6
+	select HAVE_ARM_ARCH_TIMER
+	help
+	  Support for NVIDIA Tegra T124 processor family, based on the
+	  ARM CortexA15MP CPU
 
 config TEGRA_AHB
 	bool "Enable AHB driver for NVIDIA Tegra SoCs"
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 98b184e..019bb17 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -1,6 +1,5 @@
 asflags-y				+= -march=armv7-a
 
-obj-y                                   += common.o
 obj-y                                   += io.o
 obj-y                                   += irq.o
 obj-y					+= fuse.o
@@ -17,24 +16,29 @@ obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= tegra20_speedo.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= tegra2_emc.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= sleep-tegra20.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= pm-tegra20.o
 ifeq ($(CONFIG_CPU_IDLE),y)
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= cpuidle-tegra20.o
 endif
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= tegra30_speedo.o
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= sleep-tegra30.o
+obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= pm-tegra30.o
 ifeq ($(CONFIG_CPU_IDLE),y)
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= cpuidle-tegra30.o
 endif
 obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
-obj-$(CONFIG_TEGRA_PCI)			+= pcie.o
 
 obj-$(CONFIG_ARCH_TEGRA_114_SOC)	+= tegra114_speedo.o
 obj-$(CONFIG_ARCH_TEGRA_114_SOC)	+= sleep-tegra30.o
+obj-$(CONFIG_ARCH_TEGRA_114_SOC)	+= pm-tegra30.o
 ifeq ($(CONFIG_CPU_IDLE),y)
 obj-$(CONFIG_ARCH_TEGRA_114_SOC)	+= cpuidle-tegra114.o
 endif
-
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= board-harmony-pcie.o
+obj-$(CONFIG_ARCH_TEGRA_124_SOC)	+= sleep-tegra30.o
+obj-$(CONFIG_ARCH_TEGRA_124_SOC)	+= pm-tegra30.o
+ifeq ($(CONFIG_CPU_IDLE),y)
+obj-$(CONFIG_ARCH_TEGRA_124_SOC)	+= cpuidle-tegra114.o
+endif
 
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= board-paz00.o
diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c
deleted file mode 100644
index 035b240..0000000
--- a/arch/arm/mach-tegra/board-harmony-pcie.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-harmony-pcie.c
- *
- * Copyright (C) 2010 CompuLab, Ltd.
- * Mike Rapoport <mike@compulab.co.il>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/err.h>
-#include <linux/of_gpio.h>
-#include <linux/regulator/consumer.h>
-
-#include <asm/mach-types.h>
-
-#include "board.h"
-
-#ifdef CONFIG_TEGRA_PCI
-
-int __init harmony_pcie_init(void)
-{
-	struct device_node *np;
-	int en_vdd_1v05;
-	struct regulator *regulator = NULL;
-	int err;
-
-	np = of_find_node_by_path("/regulators/regulator@3");
-	if (!np) {
-		pr_err("%s: of_find_node_by_path failed\n", __func__);
-		return -ENODEV;
-	}
-
-	en_vdd_1v05 = of_get_named_gpio(np, "gpio", 0);
-	if (en_vdd_1v05 < 0) {
-		pr_err("%s: of_get_named_gpio failed: %d\n", __func__,
-		       en_vdd_1v05);
-		return en_vdd_1v05;
-	}
-
-	err = gpio_request(en_vdd_1v05, "EN_VDD_1V05");
-	if (err) {
-		pr_err("%s: gpio_request failed: %d\n", __func__, err);
-		return err;
-	}
-
-	gpio_direction_output(en_vdd_1v05, 1);
-
-	regulator = regulator_get(NULL, "vdd_ldo0,vddio_pex_clk");
-	if (IS_ERR(regulator)) {
-		err = PTR_ERR(regulator);
-		pr_err("%s: regulator_get failed: %d\n", __func__, err);
-		goto err_reg;
-	}
-
-	err = regulator_enable(regulator);
-	if (err) {
-		pr_err("%s: regulator_enable failed: %d\n", __func__, err);
-		goto err_en;
-	}
-
-	err = tegra_pcie_init(true, true);
-	if (err) {
-		pr_err("%s: tegra_pcie_init failed: %d\n", __func__, err);
-		goto err_pcie;
-	}
-
-	return 0;
-
-err_pcie:
-	regulator_disable(regulator);
-err_en:
-	regulator_put(regulator);
-err_reg:
-	gpio_free(en_vdd_1v05);
-
-	return err;
-}
-
-#endif
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 740e16f..06f0240 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -20,12 +20,11 @@
 #include <linux/platform_device.h>
 #include <linux/rfkill-gpio.h>
 #include "board.h"
-#include "board-paz00.h"
 
 static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = {
 	.name		= "wifi_rfkill",
-	.reset_gpio	= TEGRA_WIFI_RST,
-	.shutdown_gpio	= TEGRA_WIFI_PWRN,
+	.reset_gpio	= 25, /* PD1 */
+	.shutdown_gpio	= 85, /* PK5 */
 	.type	= RFKILL_TYPE_WLAN,
 };
 
diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h
deleted file mode 100644
index 25c08ec..0000000
--- a/arch/arm/mach-tegra/board-paz00.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-paz00.h
- *
- * Copyright (C) 2010 Marc Dietrich <marvin24@gmx.de>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _MACH_TEGRA_BOARD_PAZ00_H
-#define _MACH_TEGRA_BOARD_PAZ00_H
-
-#include "gpio-names.h"
-
-#define TEGRA_WIFI_PWRN			TEGRA_GPIO_PK5
-#define TEGRA_WIFI_RST			TEGRA_GPIO_PD1
-
-#endif
diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h
index 9a6659f..bcf5dbf 100644
--- a/arch/arm/mach-tegra/board.h
+++ b/arch/arm/mach-tegra/board.h
@@ -25,21 +25,8 @@
 #include <linux/types.h>
 #include <linux/reboot.h>
 
-void tegra_assert_system_reset(enum reboot_mode mode, const char *cmd);
-
-void __init tegra_init_early(void);
 void __init tegra_map_common_io(void);
 void __init tegra_init_irq(void);
-void __init tegra_dt_init_irq(void);
-int __init tegra_pcie_init(bool init_port0, bool init_port1);
-
-void tegra_init_late(void);
-
-#ifdef CONFIG_DEBUG_FS
-int tegra_clk_debugfs_init(void);
-#else
-static inline int tegra_clk_debugfs_init(void) { return 0; }
-#endif
 
 int __init tegra_powergate_init(void);
 #if defined(CONFIG_ARCH_TEGRA_2x_SOC) && defined(CONFIG_DEBUG_FS)
@@ -48,13 +35,6 @@ int __init tegra_powergate_debugfs_init(void);
 static inline int tegra_powergate_debugfs_init(void) { return 0; }
 #endif
 
-int __init harmony_regulator_init(void);
-#ifdef CONFIG_TEGRA_PCI
-int __init harmony_pcie_init(void);
-#else
-static inline int harmony_pcie_init(void) { return 0; }
-#endif
-
 void __init tegra_paz00_wifikill_init(void);
 
 #endif
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
deleted file mode 100644
index 94a119a..0000000
--- a/arch/arm/mach-tegra/common.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * arch/arm/mach-tegra/common.c
- *
- * Copyright (c) 2013 NVIDIA Corporation. All rights reserved.
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/reboot.h>
-#include <linux/irqchip.h>
-#include <linux/clk-provider.h>
-
-#include <asm/hardware/cache-l2x0.h>
-
-#include "board.h"
-#include "common.h"
-#include "cpuidle.h"
-#include "fuse.h"
-#include "iomap.h"
-#include "irq.h"
-#include "pmc.h"
-#include "apbio.h"
-#include "sleep.h"
-#include "pm.h"
-#include "reset.h"
-
-/*
- * Storage for debug-macro.S's state.
- *
- * This must be in .data not .bss so that it gets initialized each time the
- * kernel is loaded. The data is declared here rather than debug-macro.S so
- * that multiple inclusions of debug-macro.S point at the same data.
- */
-u32 tegra_uart_config[4] = {
-	/* Debug UART initialization required */
-	1,
-	/* Debug UART physical address */
-	0,
-	/* Debug UART virtual address */
-	0,
-	/* Scratch space for debug macro */
-	0,
-};
-
-#ifdef CONFIG_OF
-void __init tegra_dt_init_irq(void)
-{
-	of_clk_init(NULL);
-	tegra_pmc_init();
-	tegra_init_irq();
-	irqchip_init();
-	tegra_legacy_irq_syscore_init();
-}
-#endif
-
-void tegra_assert_system_reset(enum reboot_mode mode, const char *cmd)
-{
-	void __iomem *reset = IO_ADDRESS(TEGRA_PMC_BASE + 0);
-	u32 reg;
-
-	reg = readl_relaxed(reset);
-	reg |= 0x10;
-	writel_relaxed(reg, reset);
-}
-
-static void __init tegra_init_cache(void)
-{
-#ifdef CONFIG_CACHE_L2X0
-	int ret;
-	void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000;
-	u32 aux_ctrl, cache_type;
-
-	cache_type = readl(p + L2X0_CACHE_TYPE);
-	aux_ctrl = (cache_type & 0x700) << (17-8);
-	aux_ctrl |= 0x7C400001;
-
-	ret = l2x0_of_init(aux_ctrl, 0x8200c3fe);
-	if (!ret)
-		l2x0_saved_regs_addr = virt_to_phys(&l2x0_saved_regs);
-#endif
-
-}
-
-void __init tegra_init_early(void)
-{
-	tegra_cpu_reset_handler_init();
-	tegra_apb_io_init();
-	tegra_init_fuse();
-	tegra_init_cache();
-	tegra_powergate_init();
-	tegra_hotplug_init();
-}
-
-void __init tegra_init_late(void)
-{
-	tegra_init_suspend();
-	tegra_cpuidle_init();
-	tegra_powergate_debugfs_init();
-}
diff --git a/arch/arm/mach-tegra/common.h b/arch/arm/mach-tegra/common.h
index 32f8eb3..5900cc4 100644
--- a/arch/arm/mach-tegra/common.h
+++ b/arch/arm/mach-tegra/common.h
@@ -2,4 +2,3 @@ extern struct smp_operations tegra_smp_ops;
 
 extern int tegra_cpu_kill(unsigned int cpu);
 extern void tegra_cpu_die(unsigned int cpu);
-extern int tegra_cpu_disable(unsigned int cpu);
diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c
index 1d1c602..e0b8730 100644
--- a/arch/arm/mach-tegra/cpuidle-tegra114.c
+++ b/arch/arm/mach-tegra/cpuidle-tegra114.c
@@ -17,15 +17,64 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/cpuidle.h>
+#include <linux/cpu_pm.h>
+#include <linux/clockchips.h>
 
 #include <asm/cpuidle.h>
+#include <asm/suspend.h>
+#include <asm/smp_plat.h>
+
+#include "pm.h"
+#include "sleep.h"
+
+#ifdef CONFIG_PM_SLEEP
+#define TEGRA114_MAX_STATES 2
+#else
+#define TEGRA114_MAX_STATES 1
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+static int tegra114_idle_power_down(struct cpuidle_device *dev,
+				    struct cpuidle_driver *drv,
+				    int index)
+{
+	local_fiq_disable();
+
+	tegra_set_cpu_in_lp2();
+	cpu_pm_enter();
+
+	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu);
+
+	cpu_suspend(0, tegra30_sleep_cpu_secondary_finish);
+
+	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu);
+
+	cpu_pm_exit();
+	tegra_clear_cpu_in_lp2();
+
+	local_fiq_enable();
+
+	return index;
+}
+#endif
 
 static struct cpuidle_driver tegra_idle_driver = {
 	.name = "tegra_idle",
 	.owner = THIS_MODULE,
-	.state_count = 1,
+	.state_count = TEGRA114_MAX_STATES,
 	.states = {
 		[0] = ARM_CPUIDLE_WFI_STATE_PWR(600),
+#ifdef CONFIG_PM_SLEEP
+		[1] = {
+			.enter			= tegra114_idle_power_down,
+			.exit_latency		= 500,
+			.target_residency	= 1000,
+			.power_usage		= 0,
+			.flags			= CPUIDLE_FLAG_TIME_VALID,
+			.name			= "powered-down",
+			.desc			= "CPU power gated",
+		},
+#endif
 	},
 };
 
diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c
index 706aa42..b82dcae 100644
--- a/arch/arm/mach-tegra/cpuidle-tegra20.c
+++ b/arch/arm/mach-tegra/cpuidle-tegra20.c
@@ -211,6 +211,18 @@ static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev,
 }
 #endif
 
+/*
+ * Tegra20 HW appears to have a bug such that PCIe device interrupts, whether
+ * they are legacy IRQs or MSI, are lost when LP2 is enabled. To work around
+ * this, simply disable LP2 if the PCI driver and DT node are both enabled.
+ */
+void tegra20_cpuidle_pcie_irqs_in_use(void)
+{
+	pr_info_once(
+		"Disabling cpuidle LP2 state, since PCIe IRQs are in use\n");
+	tegra_idle_driver.states[1].disabled = true;
+}
+
 int __init tegra20_cpuidle_init(void)
 {
 	return cpuidle_register(&tegra_idle_driver, cpu_possible_mask);
diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c
index e85973c..7bc5d8d 100644
--- a/arch/arm/mach-tegra/cpuidle.c
+++ b/arch/arm/mach-tegra/cpuidle.c
@@ -39,8 +39,20 @@ void __init tegra_cpuidle_init(void)
 			tegra30_cpuidle_init();
 		break;
 	case TEGRA114:
-		if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC))
+	case TEGRA124:
+		if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
+		    IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
 			tegra114_cpuidle_init();
 		break;
 	}
 }
+
+void tegra_cpuidle_pcie_irqs_in_use(void)
+{
+	switch (tegra_chip_id) {
+	case TEGRA20:
+		if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
+			tegra20_cpuidle_pcie_irqs_in_use();
+		break;
+	}
+}
diff --git a/arch/arm/mach-tegra/cpuidle.h b/arch/arm/mach-tegra/cpuidle.h
index 9ec2c1a..c017dab 100644
--- a/arch/arm/mach-tegra/cpuidle.h
+++ b/arch/arm/mach-tegra/cpuidle.h
@@ -19,6 +19,7 @@
 
 #ifdef CONFIG_CPU_IDLE
 int tegra20_cpuidle_init(void);
+void tegra20_cpuidle_pcie_irqs_in_use(void);
 int tegra30_cpuidle_init(void);
 int tegra114_cpuidle_init(void);
 void tegra_cpuidle_init(void);
diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c
index b477ef3..ce8ab8a 100644
--- a/arch/arm/mach-tegra/flowctrl.c
+++ b/arch/arm/mach-tegra/flowctrl.c
@@ -86,6 +86,8 @@ void flowctrl_cpu_suspend_enter(unsigned int cpuid)
 		reg |= TEGRA20_FLOW_CTRL_CSR_WFE_CPU0 << cpuid;
 		break;
 	case TEGRA30:
+	case TEGRA114:
+	case TEGRA124:
 		/* clear wfe bitmap */
 		reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP;
 		/* clear wfi bitmap */
@@ -123,6 +125,8 @@ void flowctrl_cpu_suspend_exit(unsigned int cpuid)
 		reg &= ~TEGRA20_FLOW_CTRL_CSR_WFI_BITMAP;
 		break;
 	case TEGRA30:
+	case TEGRA114:
+	case TEGRA124:
 		/* clear wfe bitmap */
 		reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP;
 		/* clear wfi bitmap */
diff --git a/arch/arm/mach-tegra/flowctrl.h b/arch/arm/mach-tegra/flowctrl.h
index 7a29bae..c89aac6 100644
--- a/arch/arm/mach-tegra/flowctrl.h
+++ b/arch/arm/mach-tegra/flowctrl.h
@@ -28,9 +28,18 @@
 #define FLOW_CTRL_SCLK_RESUME		(1 << 27)
 #define FLOW_CTRL_HALT_CPU_IRQ		(1 << 10)
 #define	FLOW_CTRL_HALT_CPU_FIQ		(1 << 8)
+#define FLOW_CTRL_HALT_LIC_IRQ		(1 << 11)
+#define FLOW_CTRL_HALT_LIC_FIQ		(1 << 10)
+#define FLOW_CTRL_HALT_GIC_IRQ		(1 << 9)
+#define FLOW_CTRL_HALT_GIC_FIQ		(1 << 8)
 #define FLOW_CTRL_CPU0_CSR		0x8
 #define	FLOW_CTRL_CSR_INTR_FLAG		(1 << 15)
 #define FLOW_CTRL_CSR_EVENT_FLAG	(1 << 14)
+#define FLOW_CTRL_CSR_ENABLE_EXT_CRAIL	(1 << 13)
+#define FLOW_CTRL_CSR_ENABLE_EXT_NCPU	(1 << 12)
+#define FLOW_CTRL_CSR_ENABLE_EXT_MASK ( \
+		FLOW_CTRL_CSR_ENABLE_EXT_NCPU | \
+		FLOW_CTRL_CSR_ENABLE_EXT_CRAIL)
 #define FLOW_CTRL_CSR_ENABLE		(1 << 0)
 #define FLOW_CTRL_HALT_CPU1_EVENTS	0x14
 #define FLOW_CTRL_CPU1_CSR		0x18
diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c
index e035cd2..d4639c5 100644
--- a/arch/arm/mach-tegra/fuse.c
+++ b/arch/arm/mach-tegra/fuse.c
@@ -21,14 +21,26 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/export.h>
+#include <linux/random.h>
 #include <linux/tegra-soc.h>
 
 #include "fuse.h"
 #include "iomap.h"
 #include "apbio.h"
 
+/* Tegra20 only */
 #define FUSE_UID_LOW		0x108
 #define FUSE_UID_HIGH		0x10c
+
+/* Tegra30 and later */
+#define FUSE_VENDOR_CODE	0x200
+#define FUSE_FAB_CODE		0x204
+#define FUSE_LOT_CODE_0		0x208
+#define FUSE_LOT_CODE_1		0x20c
+#define FUSE_WAFER_ID		0x210
+#define FUSE_X_COORDINATE	0x214
+#define FUSE_Y_COORDINATE	0x218
+
 #define FUSE_SKU_INFO		0x110
 
 #define TEGRA20_FUSE_SPARE_BIT		0x200
@@ -112,21 +124,51 @@ u32 tegra_read_chipid(void)
 	return readl_relaxed(IO_ADDRESS(TEGRA_APB_MISC_BASE) + 0x804);
 }
 
-void tegra_init_fuse(void)
+static void __init tegra20_fuse_init_randomness(void)
+{
+	u32 randomness[2];
+
+	randomness[0] = tegra_fuse_readl(FUSE_UID_LOW);
+	randomness[1] = tegra_fuse_readl(FUSE_UID_HIGH);
+
+	add_device_randomness(randomness, sizeof(randomness));
+}
+
+/* Applies to Tegra30 or later */
+static void __init tegra30_fuse_init_randomness(void)
+{
+	u32 randomness[7];
+
+	randomness[0] = tegra_fuse_readl(FUSE_VENDOR_CODE);
+	randomness[1] = tegra_fuse_readl(FUSE_FAB_CODE);
+	randomness[2] = tegra_fuse_readl(FUSE_LOT_CODE_0);
+	randomness[3] = tegra_fuse_readl(FUSE_LOT_CODE_1);
+	randomness[4] = tegra_fuse_readl(FUSE_WAFER_ID);
+	randomness[5] = tegra_fuse_readl(FUSE_X_COORDINATE);
+	randomness[6] = tegra_fuse_readl(FUSE_Y_COORDINATE);
+
+	add_device_randomness(randomness, sizeof(randomness));
+}
+
+void __init tegra_init_fuse(void)
 {
 	u32 id;
+	u32 randomness[5];
 
 	u32 reg = readl(IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x48));
 	reg |= 1 << 28;
 	writel(reg, IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x48));
 
 	reg = tegra_fuse_readl(FUSE_SKU_INFO);
+	randomness[0] = reg;
 	tegra_sku_id = reg & 0xFF;
 
 	reg = tegra_apb_readl(TEGRA_APB_MISC_BASE + STRAP_OPT);
+	randomness[1] = reg;
 	tegra_bct_strapping = (reg & RAM_ID_MASK) >> RAM_CODE_SHIFT;
 
 	id = tegra_read_chipid();
+	randomness[2] = id;
 	tegra_chip_id = (id >> 8) & 0xff;
 
 	switch (tegra_chip_id) {
@@ -149,6 +191,18 @@ void tegra_init_fuse(void)
 
 	tegra_revision = tegra_get_revision(id);
 	tegra_init_speedo_data();
+	randomness[3] = (tegra_cpu_process_id << 16) | tegra_core_process_id;
+	randomness[4] = (tegra_cpu_speedo_id << 16) | tegra_soc_speedo_id;
+
+	add_device_randomness(randomness, sizeof(randomness));
+	switch (tegra_chip_id) {
+	case TEGRA20:
+		tegra20_fuse_init_randomness();
+	case TEGRA30:
+	case TEGRA114:
+	default:
+		tegra30_fuse_init_randomness();
+	}
 
 	pr_info("Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n",
 		tegra_revision_name[tegra_revision],
diff --git a/arch/arm/mach-tegra/fuse.h b/arch/arm/mach-tegra/fuse.h
index def7968..c01d047 100644
--- a/arch/arm/mach-tegra/fuse.h
+++ b/arch/arm/mach-tegra/fuse.h
@@ -29,6 +29,7 @@
 #define TEGRA20		0x20
 #define TEGRA30		0x30
 #define TEGRA114	0x35
+#define TEGRA124	0x40
 
 #ifndef __ASSEMBLY__
 enum tegra_revision {
diff --git a/arch/arm/mach-tegra/gpio-names.h b/arch/arm/mach-tegra/gpio-names.h
deleted file mode 100644
index f28220a..0000000
--- a/arch/arm/mach-tegra/gpio-names.h
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/gpio-names.h
- *
- * Copyright (c) 2010 Google, Inc
- *
- * Author:
- *	Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_TEGRA_GPIO_NAMES_H
-#define __MACH_TEGRA_GPIO_NAMES_H
-
-#define TEGRA_GPIO_PA0		0
-#define TEGRA_GPIO_PA1		1
-#define TEGRA_GPIO_PA2		2
-#define TEGRA_GPIO_PA3		3
-#define TEGRA_GPIO_PA4		4
-#define TEGRA_GPIO_PA5		5
-#define TEGRA_GPIO_PA6		6
-#define TEGRA_GPIO_PA7		7
-#define TEGRA_GPIO_PB0		8
-#define TEGRA_GPIO_PB1		9
-#define TEGRA_GPIO_PB2		10
-#define TEGRA_GPIO_PB3		11
-#define TEGRA_GPIO_PB4		12
-#define TEGRA_GPIO_PB5		13
-#define TEGRA_GPIO_PB6		14
-#define TEGRA_GPIO_PB7		15
-#define TEGRA_GPIO_PC0		16
-#define TEGRA_GPIO_PC1		17
-#define TEGRA_GPIO_PC2		18
-#define TEGRA_GPIO_PC3		19
-#define TEGRA_GPIO_PC4		20
-#define TEGRA_GPIO_PC5		21
-#define TEGRA_GPIO_PC6		22
-#define TEGRA_GPIO_PC7		23
-#define TEGRA_GPIO_PD0		24
-#define TEGRA_GPIO_PD1		25
-#define TEGRA_GPIO_PD2		26
-#define TEGRA_GPIO_PD3		27
-#define TEGRA_GPIO_PD4		28
-#define TEGRA_GPIO_PD5		29
-#define TEGRA_GPIO_PD6		30
-#define TEGRA_GPIO_PD7		31
-#define TEGRA_GPIO_PE0		32
-#define TEGRA_GPIO_PE1		33
-#define TEGRA_GPIO_PE2		34
-#define TEGRA_GPIO_PE3		35
-#define TEGRA_GPIO_PE4		36
-#define TEGRA_GPIO_PE5		37
-#define TEGRA_GPIO_PE6		38
-#define TEGRA_GPIO_PE7		39
-#define TEGRA_GPIO_PF0		40
-#define TEGRA_GPIO_PF1		41
-#define TEGRA_GPIO_PF2		42
-#define TEGRA_GPIO_PF3		43
-#define TEGRA_GPIO_PF4		44
-#define TEGRA_GPIO_PF5		45
-#define TEGRA_GPIO_PF6		46
-#define TEGRA_GPIO_PF7		47
-#define TEGRA_GPIO_PG0		48
-#define TEGRA_GPIO_PG1		49
-#define TEGRA_GPIO_PG2		50
-#define TEGRA_GPIO_PG3		51
-#define TEGRA_GPIO_PG4		52
-#define TEGRA_GPIO_PG5		53
-#define TEGRA_GPIO_PG6		54
-#define TEGRA_GPIO_PG7		55
-#define TEGRA_GPIO_PH0		56
-#define TEGRA_GPIO_PH1		57
-#define TEGRA_GPIO_PH2		58
-#define TEGRA_GPIO_PH3		59
-#define TEGRA_GPIO_PH4		60
-#define TEGRA_GPIO_PH5		61
-#define TEGRA_GPIO_PH6		62
-#define TEGRA_GPIO_PH7		63
-#define TEGRA_GPIO_PI0		64
-#define TEGRA_GPIO_PI1		65
-#define TEGRA_GPIO_PI2		66
-#define TEGRA_GPIO_PI3		67
-#define TEGRA_GPIO_PI4		68
-#define TEGRA_GPIO_PI5		69
-#define TEGRA_GPIO_PI6		70
-#define TEGRA_GPIO_PI7		71
-#define TEGRA_GPIO_PJ0		72
-#define TEGRA_GPIO_PJ1		73
-#define TEGRA_GPIO_PJ2		74
-#define TEGRA_GPIO_PJ3		75
-#define TEGRA_GPIO_PJ4		76
-#define TEGRA_GPIO_PJ5		77
-#define TEGRA_GPIO_PJ6		78
-#define TEGRA_GPIO_PJ7		79
-#define TEGRA_GPIO_PK0		80
-#define TEGRA_GPIO_PK1		81
-#define TEGRA_GPIO_PK2		82
-#define TEGRA_GPIO_PK3		83
-#define TEGRA_GPIO_PK4		84
-#define TEGRA_GPIO_PK5		85
-#define TEGRA_GPIO_PK6		86
-#define TEGRA_GPIO_PK7		87
-#define TEGRA_GPIO_PL0		88
-#define TEGRA_GPIO_PL1		89
-#define TEGRA_GPIO_PL2		90
-#define TEGRA_GPIO_PL3		91
-#define TEGRA_GPIO_PL4		92
-#define TEGRA_GPIO_PL5		93
-#define TEGRA_GPIO_PL6		94
-#define TEGRA_GPIO_PL7		95
-#define TEGRA_GPIO_PM0		96
-#define TEGRA_GPIO_PM1		97
-#define TEGRA_GPIO_PM2		98
-#define TEGRA_GPIO_PM3		99
-#define TEGRA_GPIO_PM4		100
-#define TEGRA_GPIO_PM5		101
-#define TEGRA_GPIO_PM6		102
-#define TEGRA_GPIO_PM7		103
-#define TEGRA_GPIO_PN0		104
-#define TEGRA_GPIO_PN1		105
-#define TEGRA_GPIO_PN2		106
-#define TEGRA_GPIO_PN3		107
-#define TEGRA_GPIO_PN4		108
-#define TEGRA_GPIO_PN5		109
-#define TEGRA_GPIO_PN6		110
-#define TEGRA_GPIO_PN7		111
-#define TEGRA_GPIO_PO0		112
-#define TEGRA_GPIO_PO1		113
-#define TEGRA_GPIO_PO2		114
-#define TEGRA_GPIO_PO3		115
-#define TEGRA_GPIO_PO4		116
-#define TEGRA_GPIO_PO5		117
-#define TEGRA_GPIO_PO6		118
-#define TEGRA_GPIO_PO7		119
-#define TEGRA_GPIO_PP0		120
-#define TEGRA_GPIO_PP1		121
-#define TEGRA_GPIO_PP2		122
-#define TEGRA_GPIO_PP3		123
-#define TEGRA_GPIO_PP4		124
-#define TEGRA_GPIO_PP5		125
-#define TEGRA_GPIO_PP6		126
-#define TEGRA_GPIO_PP7		127
-#define TEGRA_GPIO_PQ0		128
-#define TEGRA_GPIO_PQ1		129
-#define TEGRA_GPIO_PQ2		130
-#define TEGRA_GPIO_PQ3		131
-#define TEGRA_GPIO_PQ4		132
-#define TEGRA_GPIO_PQ5		133
-#define TEGRA_GPIO_PQ6		134
-#define TEGRA_GPIO_PQ7		135
-#define TEGRA_GPIO_PR0		136
-#define TEGRA_GPIO_PR1		137
-#define TEGRA_GPIO_PR2		138
-#define TEGRA_GPIO_PR3		139
-#define TEGRA_GPIO_PR4		140
-#define TEGRA_GPIO_PR5		141
-#define TEGRA_GPIO_PR6		142
-#define TEGRA_GPIO_PR7		143
-#define TEGRA_GPIO_PS0		144
-#define TEGRA_GPIO_PS1		145
-#define TEGRA_GPIO_PS2		146
-#define TEGRA_GPIO_PS3		147
-#define TEGRA_GPIO_PS4		148
-#define TEGRA_GPIO_PS5		149
-#define TEGRA_GPIO_PS6		150
-#define TEGRA_GPIO_PS7		151
-#define TEGRA_GPIO_PT0		152
-#define TEGRA_GPIO_PT1		153
-#define TEGRA_GPIO_PT2		154
-#define TEGRA_GPIO_PT3		155
-#define TEGRA_GPIO_PT4		156
-#define TEGRA_GPIO_PT5		157
-#define TEGRA_GPIO_PT6		158
-#define TEGRA_GPIO_PT7		159
-#define TEGRA_GPIO_PU0		160
-#define TEGRA_GPIO_PU1		161
-#define TEGRA_GPIO_PU2		162
-#define TEGRA_GPIO_PU3		163
-#define TEGRA_GPIO_PU4		164
-#define TEGRA_GPIO_PU5		165
-#define TEGRA_GPIO_PU6		166
-#define TEGRA_GPIO_PU7		167
-#define TEGRA_GPIO_PV0		168
-#define TEGRA_GPIO_PV1		169
-#define TEGRA_GPIO_PV2		170
-#define TEGRA_GPIO_PV3		171
-#define TEGRA_GPIO_PV4		172
-#define TEGRA_GPIO_PV5		173
-#define TEGRA_GPIO_PV6		174
-#define TEGRA_GPIO_PV7		175
-#define TEGRA_GPIO_PW0		176
-#define TEGRA_GPIO_PW1		177
-#define TEGRA_GPIO_PW2		178
-#define TEGRA_GPIO_PW3		179
-#define TEGRA_GPIO_PW4		180
-#define TEGRA_GPIO_PW5		181
-#define TEGRA_GPIO_PW6		182
-#define TEGRA_GPIO_PW7		183
-#define TEGRA_GPIO_PX0		184
-#define TEGRA_GPIO_PX1		185
-#define TEGRA_GPIO_PX2		186
-#define TEGRA_GPIO_PX3		187
-#define TEGRA_GPIO_PX4		188
-#define TEGRA_GPIO_PX5		189
-#define TEGRA_GPIO_PX6		190
-#define TEGRA_GPIO_PX7		191
-#define TEGRA_GPIO_PY0		192
-#define TEGRA_GPIO_PY1		193
-#define TEGRA_GPIO_PY2		194
-#define TEGRA_GPIO_PY3		195
-#define TEGRA_GPIO_PY4		196
-#define TEGRA_GPIO_PY5		197
-#define TEGRA_GPIO_PY6		198
-#define TEGRA_GPIO_PY7		199
-#define TEGRA_GPIO_PZ0		200
-#define TEGRA_GPIO_PZ1		201
-#define TEGRA_GPIO_PZ2		202
-#define TEGRA_GPIO_PZ3		203
-#define TEGRA_GPIO_PZ4		204
-#define TEGRA_GPIO_PZ5		205
-#define TEGRA_GPIO_PZ6		206
-#define TEGRA_GPIO_PZ7		207
-#define TEGRA_GPIO_PAA0		208
-#define TEGRA_GPIO_PAA1		209
-#define TEGRA_GPIO_PAA2		210
-#define TEGRA_GPIO_PAA3		211
-#define TEGRA_GPIO_PAA4		212
-#define TEGRA_GPIO_PAA5		213
-#define TEGRA_GPIO_PAA6		214
-#define TEGRA_GPIO_PAA7		215
-#define TEGRA_GPIO_PBB0		216
-#define TEGRA_GPIO_PBB1		217
-#define TEGRA_GPIO_PBB2		218
-#define TEGRA_GPIO_PBB3		219
-#define TEGRA_GPIO_PBB4		220
-#define TEGRA_GPIO_PBB5		221
-#define TEGRA_GPIO_PBB6		222
-#define TEGRA_GPIO_PBB7		223
-
-#endif
diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S
index 045c16f..2072e73 100644
--- a/arch/arm/mach-tegra/headsmp.S
+++ b/arch/arm/mach-tegra/headsmp.S
@@ -6,6 +6,7 @@
         .section ".text.head", "ax"
 
 ENTRY(tegra_secondary_startup)
-        bl      v7_invalidate_l1
+        check_cpu_part_num 0xc09, r8, r9
+        bleq    v7_invalidate_l1
         b       secondary_startup
 ENDPROC(tegra_secondary_startup)
diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c
index a52c10e..ff26af2 100644
--- a/arch/arm/mach-tegra/hotplug.c
+++ b/arch/arm/mach-tegra/hotplug.c
@@ -37,7 +37,7 @@ int tegra_cpu_kill(unsigned cpu)
 void __ref tegra_cpu_die(unsigned int cpu)
 {
 	/* Clean L1 data cache */
-	tegra_disable_clean_inv_dcache();
+	tegra_disable_clean_inv_dcache(TEGRA_FLUSH_CACHE_LOUIS);
 
 	/* Shut down the current CPU. */
 	tegra_hotplug_shutdown();
@@ -46,17 +46,6 @@ void __ref tegra_cpu_die(unsigned int cpu)
 	BUG();
 }
 
-int tegra_cpu_disable(unsigned int cpu)
-{
-	switch (tegra_chip_id) {
-	case TEGRA20:
-	case TEGRA30:
-		return cpu == 0 ? -EPERM : 0;
-	default:
-		return 0;
-	}
-}
-
 void __init tegra_hotplug_init(void)
 {
 	if (!IS_ENABLED(CONFIG_HOTPLUG_CPU))
@@ -68,4 +57,6 @@ void __init tegra_hotplug_init(void)
 		tegra_hotplug_shutdown = tegra30_hotplug_shutdown;
 	if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) && tegra_chip_id == TEGRA114)
 		tegra_hotplug_shutdown = tegra30_hotplug_shutdown;
+	if (IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC) && tegra_chip_id == TEGRA124)
+		tegra_hotplug_shutdown = tegra30_hotplug_shutdown;
 }
diff --git a/arch/arm/mach-tegra/iomap.h b/arch/arm/mach-tegra/iomap.h
index 399fbca..26b1c2a 100644
--- a/arch/arm/mach-tegra/iomap.h
+++ b/arch/arm/mach-tegra/iomap.h
@@ -24,42 +24,12 @@
 #define TEGRA_IRAM_BASE			0x40000000
 #define TEGRA_IRAM_SIZE			SZ_256K
 
-#define TEGRA_HOST1X_BASE		0x50000000
-#define TEGRA_HOST1X_SIZE		0x24000
-
 #define TEGRA_ARM_PERIF_BASE		0x50040000
 #define TEGRA_ARM_PERIF_SIZE		SZ_8K
 
-#define TEGRA_ARM_PL310_BASE		0x50043000
-#define TEGRA_ARM_PL310_SIZE		SZ_4K
-
 #define TEGRA_ARM_INT_DIST_BASE		0x50041000
 #define TEGRA_ARM_INT_DIST_SIZE		SZ_4K
 
-#define TEGRA_MPE_BASE			0x54040000
-#define TEGRA_MPE_SIZE			SZ_256K
-
-#define TEGRA_VI_BASE			0x54080000
-#define TEGRA_VI_SIZE			SZ_256K
-
-#define TEGRA_ISP_BASE			0x54100000
-#define TEGRA_ISP_SIZE			SZ_256K
-
-#define TEGRA_DISPLAY_BASE		0x54200000
-#define TEGRA_DISPLAY_SIZE		SZ_256K
-
-#define TEGRA_DISPLAY2_BASE		0x54240000
-#define TEGRA_DISPLAY2_SIZE		SZ_256K
-
-#define TEGRA_HDMI_BASE			0x54280000
-#define TEGRA_HDMI_SIZE			SZ_256K
-
-#define TEGRA_GART_BASE			0x58000000
-#define TEGRA_GART_SIZE			SZ_32M
-
-#define TEGRA_RES_SEMA_BASE		0x60001000
-#define TEGRA_RES_SEMA_SIZE		SZ_4K
-
 #define TEGRA_PRIMARY_ICTLR_BASE	0x60004000
 #define TEGRA_PRIMARY_ICTLR_SIZE	SZ_64
 
@@ -96,51 +66,15 @@
 #define TEGRA_FLOW_CTRL_BASE		0x60007000
 #define TEGRA_FLOW_CTRL_SIZE		20
 
-#define TEGRA_AHB_DMA_BASE		0x60008000
-#define TEGRA_AHB_DMA_SIZE		SZ_4K
-
-#define TEGRA_AHB_DMA_CH0_BASE		0x60009000
-#define TEGRA_AHB_DMA_CH0_SIZE		32
-
-#define TEGRA_APB_DMA_BASE		0x6000A000
-#define TEGRA_APB_DMA_SIZE		SZ_4K
-
-#define TEGRA_APB_DMA_CH0_BASE		0x6000B000
-#define TEGRA_APB_DMA_CH0_SIZE		32
-
-#define TEGRA_AHB_GIZMO_BASE		0x6000C004
-#define TEGRA_AHB_GIZMO_SIZE		0x10C
-
 #define TEGRA_SB_BASE			0x6000C200
 #define TEGRA_SB_SIZE			256
 
-#define TEGRA_STATMON_BASE		0x6000C400
-#define TEGRA_STATMON_SIZE		SZ_1K
-
-#define TEGRA_GPIO_BASE			0x6000D000
-#define TEGRA_GPIO_SIZE			SZ_4K
-
 #define TEGRA_EXCEPTION_VECTORS_BASE    0x6000F000
 #define TEGRA_EXCEPTION_VECTORS_SIZE    SZ_4K
 
 #define TEGRA_APB_MISC_BASE		0x70000000
 #define TEGRA_APB_MISC_SIZE		SZ_4K
 
-#define TEGRA_APB_MISC_DAS_BASE		0x70000c00
-#define TEGRA_APB_MISC_DAS_SIZE		SZ_128
-
-#define TEGRA_AC97_BASE			0x70002000
-#define TEGRA_AC97_SIZE			SZ_512
-
-#define TEGRA_SPDIF_BASE		0x70002400
-#define TEGRA_SPDIF_SIZE		SZ_512
-
-#define TEGRA_I2S1_BASE			0x70002800
-#define TEGRA_I2S1_SIZE			SZ_256
-
-#define TEGRA_I2S2_BASE			0x70002A00
-#define TEGRA_I2S2_SIZE			SZ_256
-
 #define TEGRA_UARTA_BASE		0x70006000
 #define TEGRA_UARTA_SIZE		SZ_64
 
@@ -156,101 +90,26 @@
 #define TEGRA_UARTE_BASE		0x70006400
 #define TEGRA_UARTE_SIZE		SZ_256
 
-#define TEGRA_NAND_BASE			0x70008000
-#define TEGRA_NAND_SIZE			SZ_256
-
-#define TEGRA_HSMMC_BASE		0x70008500
-#define TEGRA_HSMMC_SIZE		SZ_256
-
-#define TEGRA_SNOR_BASE			0x70009000
-#define TEGRA_SNOR_SIZE			SZ_4K
-
-#define TEGRA_PWFM_BASE			0x7000A000
-#define TEGRA_PWFM_SIZE			SZ_256
-
-#define TEGRA_PWFM0_BASE		0x7000A000
-#define TEGRA_PWFM0_SIZE		4
-
-#define TEGRA_PWFM1_BASE		0x7000A010
-#define TEGRA_PWFM1_SIZE		4
-
-#define TEGRA_PWFM2_BASE		0x7000A020
-#define TEGRA_PWFM2_SIZE		4
-
-#define TEGRA_PWFM3_BASE		0x7000A030
-#define TEGRA_PWFM3_SIZE		4
-
-#define TEGRA_MIPI_BASE			0x7000B000
-#define TEGRA_MIPI_SIZE			SZ_256
-
-#define TEGRA_I2C_BASE			0x7000C000
-#define TEGRA_I2C_SIZE			SZ_256
-
-#define TEGRA_TWC_BASE			0x7000C100
-#define TEGRA_TWC_SIZE			SZ_256
-
-#define TEGRA_SPI_BASE			0x7000C380
-#define TEGRA_SPI_SIZE			48
-
-#define TEGRA_I2C2_BASE			0x7000C400
-#define TEGRA_I2C2_SIZE			SZ_256
-
-#define TEGRA_I2C3_BASE			0x7000C500
-#define TEGRA_I2C3_SIZE			SZ_256
-
-#define TEGRA_OWR_BASE			0x7000C600
-#define TEGRA_OWR_SIZE			80
-
-#define TEGRA_DVC_BASE			0x7000D000
-#define TEGRA_DVC_SIZE			SZ_512
-
-#define TEGRA_SPI1_BASE			0x7000D400
-#define TEGRA_SPI1_SIZE			SZ_512
-
-#define TEGRA_SPI2_BASE			0x7000D600
-#define TEGRA_SPI2_SIZE			SZ_512
-
-#define TEGRA_SPI3_BASE			0x7000D800
-#define TEGRA_SPI3_SIZE			SZ_512
-
-#define TEGRA_SPI4_BASE			0x7000DA00
-#define TEGRA_SPI4_SIZE			SZ_512
-
-#define TEGRA_RTC_BASE			0x7000E000
-#define TEGRA_RTC_SIZE			SZ_256
-
-#define TEGRA_KBC_BASE			0x7000E200
-#define TEGRA_KBC_SIZE			SZ_256
-
 #define TEGRA_PMC_BASE			0x7000E400
 #define TEGRA_PMC_SIZE			SZ_256
 
-#define TEGRA_MC_BASE			0x7000F000
-#define TEGRA_MC_SIZE			SZ_1K
-
 #define TEGRA_EMC_BASE			0x7000F400
 #define TEGRA_EMC_SIZE			SZ_1K
 
 #define TEGRA_FUSE_BASE			0x7000F800
 #define TEGRA_FUSE_SIZE			SZ_1K
 
-#define TEGRA_KFUSE_BASE		0x7000FC00
-#define TEGRA_KFUSE_SIZE		SZ_1K
+#define TEGRA_EMC0_BASE			0x7001A000
+#define TEGRA_EMC0_SIZE			SZ_2K
 
-#define TEGRA_CSITE_BASE		0x70040000
-#define TEGRA_CSITE_SIZE		SZ_256K
-
-#define TEGRA_SDMMC1_BASE		0xC8000000
-#define TEGRA_SDMMC1_SIZE		SZ_512
-
-#define TEGRA_SDMMC2_BASE		0xC8000200
-#define TEGRA_SDMMC2_SIZE		SZ_512
+#define TEGRA_EMC1_BASE			0x7001A800
+#define TEGRA_EMC1_SIZE			SZ_2K
 
-#define TEGRA_SDMMC3_BASE		0xC8000400
-#define TEGRA_SDMMC3_SIZE		SZ_512
+#define TEGRA124_EMC_BASE		0x7001B000
+#define TEGRA124_EMC_SIZE		SZ_2K
 
-#define TEGRA_SDMMC4_BASE		0xC8000600
-#define TEGRA_SDMMC4_SIZE		SZ_512
+#define TEGRA_CSITE_BASE		0x70040000
+#define TEGRA_CSITE_SIZE		SZ_256K
 
 /* On TEGRA, many peripherals are very closely packed in
  * two 256MB io windows (that actually only use about 64KB
@@ -278,9 +137,6 @@
 #define IO_APB_VIRT	IOMEM(0xFE300000)
 #define IO_APB_SIZE	SZ_1M
 
-#define TEGRA_PCIE_BASE		0x80000000
-#define TEGRA_PCIE_IO_BASE	(TEGRA_PCIE_BASE + SZ_4M)
-
 #define IO_TO_VIRT_BETWEEN(p, st, sz)	((p) >= (st) && (p) < ((st) + (sz)))
 #define IO_TO_VIRT_XLATE(p, pst, vst)	(((p) - (pst) + (vst)))
 
diff --git a/arch/arm/mach-tegra/irammap.h b/arch/arm/mach-tegra/irammap.h
index 501952a..e32e174 100644
--- a/arch/arm/mach-tegra/irammap.h
+++ b/arch/arm/mach-tegra/irammap.h
@@ -23,4 +23,10 @@
 #define TEGRA_IRAM_RESET_HANDLER_OFFSET	0
 #define TEGRA_IRAM_RESET_HANDLER_SIZE	SZ_1K
 
+/*
+ * This area is used for LPx resume vector, only while LPx power state is
+ * active. At other times, the AVP may use this area for arbitrary purposes
+ */
+#define TEGRA_IRAM_LPx_RESUME_AREA	(TEGRA_IRAM_BASE + SZ_4K)
+
 #endif
diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c
index 0de4eed..1a74d56 100644
--- a/arch/arm/mach-tegra/irq.c
+++ b/arch/arm/mach-tegra/irq.c
@@ -18,10 +18,12 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/cpu_pm.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/irqchip/arm-gic.h>
 #include <linux/syscore_ops.h>
 
@@ -65,6 +67,7 @@ static u32 cpu_ier[TEGRA_MAX_NUM_ICTLRS];
 static u32 cpu_iep[TEGRA_MAX_NUM_ICTLRS];
 
 static u32 ictlr_wake_mask[TEGRA_MAX_NUM_ICTLRS];
+static void __iomem *tegra_gic_cpu_base;
 #endif
 
 bool tegra_pending_sgi(void)
@@ -213,8 +216,43 @@ int tegra_legacy_irq_syscore_init(void)
 
 	return 0;
 }
+
+static int tegra_gic_notifier(struct notifier_block *self,
+			      unsigned long cmd, void *v)
+{
+	switch (cmd) {
+	case CPU_PM_ENTER:
+		writel_relaxed(0x1E0, tegra_gic_cpu_base + GIC_CPU_CTRL);
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block tegra_gic_notifier_block = {
+	.notifier_call = tegra_gic_notifier,
+};
+
+static const struct of_device_id tegra114_dt_gic_match[] __initconst = {
+	{ .compatible = "arm,cortex-a15-gic" },
+	{ }
+};
+
+static void tegra114_gic_cpu_pm_registration(void)
+{
+	struct device_node *dn;
+
+	dn = of_find_matching_node(NULL, tegra114_dt_gic_match);
+	if (!dn)
+		return;
+
+	tegra_gic_cpu_base = of_iomap(dn, 1);
+
+	cpu_pm_register_notifier(&tegra_gic_notifier_block);
+}
 #else
 #define tegra_set_wake NULL
+static void tegra114_gic_cpu_pm_registration(void) { }
 #endif
 
 void __init tegra_init_irq(void)
@@ -252,4 +290,6 @@ void __init tegra_init_irq(void)
 	if (!of_have_populated_dt())
 		gic_init(0, 29, distbase,
 			IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100));
+
+	tegra114_gic_cpu_pm_registration();
 }
diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c
deleted file mode 100644
index 46144a1..0000000
--- a/arch/arm/mach-tegra/pcie.c
+++ /dev/null
@@ -1,886 +0,0 @@
-/*
- * arch/arm/mach-tegra/pci.c
- *
- * PCIe host controller driver for TEGRA(2) SOCs
- *
- * Copyright (c) 2010, CompuLab, Ltd.
- * Author: Mike Rapoport <mike@compulab.co.il>
- *
- * Based on NVIDIA PCIe driver
- * Copyright (c) 2008-2009, NVIDIA Corporation.
- *
- * Bits taken from arch/arm/mach-dove/pcie.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/export.h>
-#include <linux/clk/tegra.h>
-#include <linux/tegra-powergate.h>
-
-#include <asm/sizes.h>
-#include <asm/mach/pci.h>
-
-#include "board.h"
-#include "iomap.h"
-
-/* Hack - need to parse this from DT */
-#define INT_PCIE_INTR 130
-
-/* register definitions */
-#define AFI_OFFSET	0x3800
-#define PADS_OFFSET	0x3000
-#define RP0_OFFSET	0x0000
-#define RP1_OFFSET	0x1000
-
-#define AFI_AXI_BAR0_SZ	0x00
-#define AFI_AXI_BAR1_SZ	0x04
-#define AFI_AXI_BAR2_SZ	0x08
-#define AFI_AXI_BAR3_SZ	0x0c
-#define AFI_AXI_BAR4_SZ	0x10
-#define AFI_AXI_BAR5_SZ	0x14
-
-#define AFI_AXI_BAR0_START	0x18
-#define AFI_AXI_BAR1_START	0x1c
-#define AFI_AXI_BAR2_START	0x20
-#define AFI_AXI_BAR3_START	0x24
-#define AFI_AXI_BAR4_START	0x28
-#define AFI_AXI_BAR5_START	0x2c
-
-#define AFI_FPCI_BAR0	0x30
-#define AFI_FPCI_BAR1	0x34
-#define AFI_FPCI_BAR2	0x38
-#define AFI_FPCI_BAR3	0x3c
-#define AFI_FPCI_BAR4	0x40
-#define AFI_FPCI_BAR5	0x44
-
-#define AFI_CACHE_BAR0_SZ	0x48
-#define AFI_CACHE_BAR0_ST	0x4c
-#define AFI_CACHE_BAR1_SZ	0x50
-#define AFI_CACHE_BAR1_ST	0x54
-
-#define AFI_MSI_BAR_SZ		0x60
-#define AFI_MSI_FPCI_BAR_ST	0x64
-#define AFI_MSI_AXI_BAR_ST	0x68
-
-#define AFI_CONFIGURATION		0xac
-#define  AFI_CONFIGURATION_EN_FPCI	(1 << 0)
-
-#define AFI_FPCI_ERROR_MASKS	0xb0
-
-#define AFI_INTR_MASK		0xb4
-#define  AFI_INTR_MASK_INT_MASK	(1 << 0)
-#define  AFI_INTR_MASK_MSI_MASK	(1 << 8)
-
-#define AFI_INTR_CODE		0xb8
-#define  AFI_INTR_CODE_MASK	0xf
-#define  AFI_INTR_MASTER_ABORT	4
-#define  AFI_INTR_LEGACY	6
-
-#define AFI_INTR_SIGNATURE	0xbc
-#define AFI_SM_INTR_ENABLE	0xc4
-
-#define AFI_AFI_INTR_ENABLE		0xc8
-#define  AFI_INTR_EN_INI_SLVERR		(1 << 0)
-#define  AFI_INTR_EN_INI_DECERR		(1 << 1)
-#define  AFI_INTR_EN_TGT_SLVERR		(1 << 2)
-#define  AFI_INTR_EN_TGT_DECERR		(1 << 3)
-#define  AFI_INTR_EN_TGT_WRERR		(1 << 4)
-#define  AFI_INTR_EN_DFPCI_DECERR	(1 << 5)
-#define  AFI_INTR_EN_AXI_DECERR		(1 << 6)
-#define  AFI_INTR_EN_FPCI_TIMEOUT	(1 << 7)
-
-#define AFI_PCIE_CONFIG					0x0f8
-#define  AFI_PCIE_CONFIG_PCIEC0_DISABLE_DEVICE		(1 << 1)
-#define  AFI_PCIE_CONFIG_PCIEC1_DISABLE_DEVICE		(1 << 2)
-#define  AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK	(0xf << 20)
-#define  AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_SINGLE	(0x0 << 20)
-#define  AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL	(0x1 << 20)
-
-#define AFI_FUSE			0x104
-#define  AFI_FUSE_PCIE_T0_GEN2_DIS	(1 << 2)
-
-#define AFI_PEX0_CTRL			0x110
-#define AFI_PEX1_CTRL			0x118
-#define  AFI_PEX_CTRL_RST		(1 << 0)
-#define  AFI_PEX_CTRL_REFCLK_EN		(1 << 3)
-
-#define RP_VEND_XP	0x00000F00
-#define  RP_VEND_XP_DL_UP	(1 << 30)
-
-#define RP_LINK_CONTROL_STATUS			0x00000090
-#define  RP_LINK_CONTROL_STATUS_LINKSTAT_MASK	0x3fff0000
-
-#define PADS_CTL_SEL		0x0000009C
-
-#define PADS_CTL		0x000000A0
-#define  PADS_CTL_IDDQ_1L	(1 << 0)
-#define  PADS_CTL_TX_DATA_EN_1L	(1 << 6)
-#define  PADS_CTL_RX_DATA_EN_1L	(1 << 10)
-
-#define PADS_PLL_CTL				0x000000B8
-#define  PADS_PLL_CTL_RST_B4SM			(1 << 1)
-#define  PADS_PLL_CTL_LOCKDET			(1 << 8)
-#define  PADS_PLL_CTL_REFCLK_MASK		(0x3 << 16)
-#define  PADS_PLL_CTL_REFCLK_INTERNAL_CML	(0 << 16)
-#define  PADS_PLL_CTL_REFCLK_INTERNAL_CMOS	(1 << 16)
-#define  PADS_PLL_CTL_REFCLK_EXTERNAL		(2 << 16)
-#define  PADS_PLL_CTL_TXCLKREF_MASK		(0x1 << 20)
-#define  PADS_PLL_CTL_TXCLKREF_DIV10		(0 << 20)
-#define  PADS_PLL_CTL_TXCLKREF_DIV5		(1 << 20)
-
-/* PMC access is required for PCIE xclk (un)clamping */
-#define PMC_SCRATCH42		0x144
-#define PMC_SCRATCH42_PCX_CLAMP	(1 << 0)
-
-static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE);
-
-#define pmc_writel(value, reg) \
-	__raw_writel(value, reg_pmc_base + (reg))
-#define pmc_readl(reg) \
-	__raw_readl(reg_pmc_base + (reg))
-
-/*
- * Tegra2 defines 1GB in the AXI address map for PCIe.
- *
- * That address space is split into different regions, with sizes and
- * offsets as follows:
- *
- * 0x80000000 - 0x80003fff - PCI controller registers
- * 0x80004000 - 0x80103fff - PCI configuration space
- * 0x80104000 - 0x80203fff - PCI extended configuration space
- * 0x80203fff - 0x803fffff - unused
- * 0x80400000 - 0x8040ffff - downstream IO
- * 0x80410000 - 0x8fffffff - unused
- * 0x90000000 - 0x9fffffff - non-prefetchable memory
- * 0xa0000000 - 0xbfffffff - prefetchable memory
- */
-#define PCIE_REGS_SZ		SZ_16K
-#define PCIE_CFG_OFF		PCIE_REGS_SZ
-#define PCIE_CFG_SZ		SZ_1M
-#define PCIE_EXT_CFG_OFF	(PCIE_CFG_SZ + PCIE_CFG_OFF)
-#define PCIE_EXT_CFG_SZ		SZ_1M
-#define PCIE_IOMAP_SZ		(PCIE_REGS_SZ + PCIE_CFG_SZ + PCIE_EXT_CFG_SZ)
-
-#define MEM_BASE_0		(TEGRA_PCIE_BASE + SZ_256M)
-#define MEM_SIZE_0		SZ_128M
-#define MEM_BASE_1		(MEM_BASE_0 + MEM_SIZE_0)
-#define MEM_SIZE_1		SZ_128M
-#define PREFETCH_MEM_BASE_0	(MEM_BASE_1 + MEM_SIZE_1)
-#define PREFETCH_MEM_SIZE_0	SZ_128M
-#define PREFETCH_MEM_BASE_1	(PREFETCH_MEM_BASE_0 + PREFETCH_MEM_SIZE_0)
-#define PREFETCH_MEM_SIZE_1	SZ_128M
-
-#define  PCIE_CONF_BUS(b)	((b) << 16)
-#define  PCIE_CONF_DEV(d)	((d) << 11)
-#define  PCIE_CONF_FUNC(f)	((f) << 8)
-#define  PCIE_CONF_REG(r)	\
-	(((r) & ~0x3) | (((r) < 256) ? PCIE_CFG_OFF : PCIE_EXT_CFG_OFF))
-
-struct tegra_pcie_port {
-	int			index;
-	u8			root_bus_nr;
-	void __iomem		*base;
-
-	bool			link_up;
-
-	char			mem_space_name[16];
-	char			prefetch_space_name[20];
-	struct resource		res[2];
-};
-
-struct tegra_pcie_info {
-	struct tegra_pcie_port	port[2];
-	int			num_ports;
-
-	void __iomem		*regs;
-	struct resource		res_mmio;
-
-	struct clk		*pex_clk;
-	struct clk		*afi_clk;
-	struct clk		*pcie_xclk;
-	struct clk		*pll_e;
-};
-
-static struct tegra_pcie_info tegra_pcie;
-
-static inline void afi_writel(u32 value, unsigned long offset)
-{
-	writel(value, offset + AFI_OFFSET + tegra_pcie.regs);
-}
-
-static inline u32 afi_readl(unsigned long offset)
-{
-	return readl(offset + AFI_OFFSET + tegra_pcie.regs);
-}
-
-static inline void pads_writel(u32 value, unsigned long offset)
-{
-	writel(value, offset + PADS_OFFSET + tegra_pcie.regs);
-}
-
-static inline u32 pads_readl(unsigned long offset)
-{
-	return readl(offset + PADS_OFFSET + tegra_pcie.regs);
-}
-
-static struct tegra_pcie_port *bus_to_port(int bus)
-{
-	int i;
-
-	for (i = tegra_pcie.num_ports - 1; i >= 0; i--) {
-		int rbus = tegra_pcie.port[i].root_bus_nr;
-		if (rbus != -1 && rbus == bus)
-			break;
-	}
-
-	return i >= 0 ? tegra_pcie.port + i : NULL;
-}
-
-static int tegra_pcie_read_conf(struct pci_bus *bus, unsigned int devfn,
-				int where, int size, u32 *val)
-{
-	struct tegra_pcie_port *pp = bus_to_port(bus->number);
-	void __iomem *addr;
-
-	if (pp) {
-		if (devfn != 0) {
-			*val = 0xffffffff;
-			return PCIBIOS_DEVICE_NOT_FOUND;
-		}
-
-		addr = pp->base + (where & ~0x3);
-	} else {
-		addr = tegra_pcie.regs + (PCIE_CONF_BUS(bus->number) +
-					  PCIE_CONF_DEV(PCI_SLOT(devfn)) +
-					  PCIE_CONF_FUNC(PCI_FUNC(devfn)) +
-					  PCIE_CONF_REG(where));
-	}
-
-	*val = readl(addr);
-
-	if (size == 1)
-		*val = (*val >> (8 * (where & 3))) & 0xff;
-	else if (size == 2)
-		*val = (*val >> (8 * (where & 3))) & 0xffff;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int tegra_pcie_write_conf(struct pci_bus *bus, unsigned int devfn,
-				 int where, int size, u32 val)
-{
-	struct tegra_pcie_port *pp = bus_to_port(bus->number);
-	void __iomem *addr;
-
-	u32 mask;
-	u32 tmp;
-
-	if (pp) {
-		if (devfn != 0)
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-		addr = pp->base + (where & ~0x3);
-	} else {
-		addr = tegra_pcie.regs + (PCIE_CONF_BUS(bus->number) +
-					  PCIE_CONF_DEV(PCI_SLOT(devfn)) +
-					  PCIE_CONF_FUNC(PCI_FUNC(devfn)) +
-					  PCIE_CONF_REG(where));
-	}
-
-	if (size == 4) {
-		writel(val, addr);
-		return PCIBIOS_SUCCESSFUL;
-	}
-
-	if (size == 2)
-		mask = ~(0xffff << ((where & 0x3) * 8));
-	else if (size == 1)
-		mask = ~(0xff << ((where & 0x3) * 8));
-	else
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	tmp = readl(addr) & mask;
-	tmp |= val << ((where & 0x3) * 8);
-	writel(tmp, addr);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops tegra_pcie_ops = {
-	.read	= tegra_pcie_read_conf,
-	.write	= tegra_pcie_write_conf,
-};
-
-static void tegra_pcie_fixup_bridge(struct pci_dev *dev)
-{
-	u16 reg;
-
-	if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) {
-		pci_read_config_word(dev, PCI_COMMAND, &reg);
-		reg |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
-			PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
-		pci_write_config_word(dev, PCI_COMMAND, reg);
-	}
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_fixup_bridge);
-
-/* Tegra PCIE root complex wrongly reports device class */
-static void tegra_pcie_fixup_class(struct pci_dev *dev)
-{
-	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
-}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf0, tegra_pcie_fixup_class);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf1, tegra_pcie_fixup_class);
-
-/* Tegra PCIE requires relaxed ordering */
-static void tegra_pcie_relax_enable(struct pci_dev *dev)
-{
-	pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_RELAX_EN);
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_relax_enable);
-
-static int tegra_pcie_setup(int nr, struct pci_sys_data *sys)
-{
-	struct tegra_pcie_port *pp;
-
-	if (nr >= tegra_pcie.num_ports)
-		return 0;
-
-	pp = tegra_pcie.port + nr;
-	pp->root_bus_nr = sys->busnr;
-
-	pci_ioremap_io(nr * SZ_64K, TEGRA_PCIE_IO_BASE);
-
-	/*
-	 * IORESOURCE_MEM
-	 */
-	snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
-		 "PCIe %d MEM", pp->index);
-	pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
-	pp->res[0].name = pp->mem_space_name;
-	if (pp->index == 0) {
-		pp->res[0].start = MEM_BASE_0;
-		pp->res[0].end = pp->res[0].start + MEM_SIZE_0 - 1;
-	} else {
-		pp->res[0].start = MEM_BASE_1;
-		pp->res[0].end = pp->res[0].start + MEM_SIZE_1 - 1;
-	}
-	pp->res[0].flags = IORESOURCE_MEM;
-	if (request_resource(&iomem_resource, &pp->res[0]))
-		panic("Request PCIe Memory resource failed\n");
-	pci_add_resource_offset(&sys->resources, &pp->res[0], sys->mem_offset);
-
-	/*
-	 * IORESOURCE_MEM | IORESOURCE_PREFETCH
-	 */
-	snprintf(pp->prefetch_space_name, sizeof(pp->prefetch_space_name),
-		 "PCIe %d PREFETCH MEM", pp->index);
-	pp->prefetch_space_name[sizeof(pp->prefetch_space_name) - 1] = 0;
-	pp->res[1].name = pp->prefetch_space_name;
-	if (pp->index == 0) {
-		pp->res[1].start = PREFETCH_MEM_BASE_0;
-		pp->res[1].end = pp->res[1].start + PREFETCH_MEM_SIZE_0 - 1;
-	} else {
-		pp->res[1].start = PREFETCH_MEM_BASE_1;
-		pp->res[1].end = pp->res[1].start + PREFETCH_MEM_SIZE_1 - 1;
-	}
-	pp->res[1].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
-	if (request_resource(&iomem_resource, &pp->res[1]))
-		panic("Request PCIe Prefetch Memory resource failed\n");
-	pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset);
-
-	return 1;
-}
-
-static int tegra_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	return INT_PCIE_INTR;
-}
-
-static struct pci_bus __init *tegra_pcie_scan_bus(int nr,
-						  struct pci_sys_data *sys)
-{
-	struct tegra_pcie_port *pp;
-
-	if (nr >= tegra_pcie.num_ports)
-		return NULL;
-
-	pp = tegra_pcie.port + nr;
-	pp->root_bus_nr = sys->busnr;
-
-	return pci_scan_root_bus(NULL, sys->busnr, &tegra_pcie_ops, sys,
-				 &sys->resources);
-}
-
-static struct hw_pci tegra_pcie_hw __initdata = {
-	.nr_controllers	= 2,
-	.setup		= tegra_pcie_setup,
-	.scan		= tegra_pcie_scan_bus,
-	.map_irq	= tegra_pcie_map_irq,
-};
-
-
-static irqreturn_t tegra_pcie_isr(int irq, void *arg)
-{
-	const char *err_msg[] = {
-		"Unknown",
-		"AXI slave error",
-		"AXI decode error",
-		"Target abort",
-		"Master abort",
-		"Invalid write",
-		"Response decoding error",
-		"AXI response decoding error",
-		"Transcation timeout",
-	};
-
-	u32 code, signature;
-
-	code = afi_readl(AFI_INTR_CODE) & AFI_INTR_CODE_MASK;
-	signature = afi_readl(AFI_INTR_SIGNATURE);
-	afi_writel(0, AFI_INTR_CODE);
-
-	if (code == AFI_INTR_LEGACY)
-		return IRQ_NONE;
-
-	if (code >= ARRAY_SIZE(err_msg))
-		code = 0;
-
-	/*
-	 * do not pollute kernel log with master abort reports since they
-	 * happen a lot during enumeration
-	 */
-	if (code == AFI_INTR_MASTER_ABORT)
-		pr_debug("PCIE: %s, signature: %08x\n", err_msg[code], signature);
-	else
-		pr_err("PCIE: %s, signature: %08x\n", err_msg[code], signature);
-
-	return IRQ_HANDLED;
-}
-
-static void tegra_pcie_setup_translations(void)
-{
-	u32 fpci_bar;
-	u32 size;
-	u32 axi_address;
-
-	/* Bar 0: config Bar */
-	fpci_bar = ((u32)0xfdff << 16);
-	size = PCIE_CFG_SZ;
-	axi_address = TEGRA_PCIE_BASE + PCIE_CFG_OFF;
-	afi_writel(axi_address, AFI_AXI_BAR0_START);
-	afi_writel(size >> 12, AFI_AXI_BAR0_SZ);
-	afi_writel(fpci_bar, AFI_FPCI_BAR0);
-
-	/* Bar 1: extended config Bar */
-	fpci_bar = ((u32)0xfe1 << 20);
-	size = PCIE_EXT_CFG_SZ;
-	axi_address = TEGRA_PCIE_BASE + PCIE_EXT_CFG_OFF;
-	afi_writel(axi_address, AFI_AXI_BAR1_START);
-	afi_writel(size >> 12, AFI_AXI_BAR1_SZ);
-	afi_writel(fpci_bar, AFI_FPCI_BAR1);
-
-	/* Bar 2: downstream IO bar */
-	fpci_bar = ((__u32)0xfdfc << 16);
-	size = SZ_128K;
-	axi_address = TEGRA_PCIE_IO_BASE;
-	afi_writel(axi_address, AFI_AXI_BAR2_START);
-	afi_writel(size >> 12, AFI_AXI_BAR2_SZ);
-	afi_writel(fpci_bar, AFI_FPCI_BAR2);
-
-	/* Bar 3: prefetchable memory BAR */
-	fpci_bar = (((PREFETCH_MEM_BASE_0 >> 12) & 0x0fffffff) << 4) | 0x1;
-	size =  PREFETCH_MEM_SIZE_0 +  PREFETCH_MEM_SIZE_1;
-	axi_address = PREFETCH_MEM_BASE_0;
-	afi_writel(axi_address, AFI_AXI_BAR3_START);
-	afi_writel(size >> 12, AFI_AXI_BAR3_SZ);
-	afi_writel(fpci_bar, AFI_FPCI_BAR3);
-
-	/* Bar 4: non prefetchable memory BAR */
-	fpci_bar = (((MEM_BASE_0 >> 12)	& 0x0FFFFFFF) << 4) | 0x1;
-	size = MEM_SIZE_0 + MEM_SIZE_1;
-	axi_address = MEM_BASE_0;
-	afi_writel(axi_address, AFI_AXI_BAR4_START);
-	afi_writel(size >> 12, AFI_AXI_BAR4_SZ);
-	afi_writel(fpci_bar, AFI_FPCI_BAR4);
-
-	/* Bar 5: NULL out the remaining BAR as it is not used */
-	fpci_bar = 0;
-	size = 0;
-	axi_address = 0;
-	afi_writel(axi_address, AFI_AXI_BAR5_START);
-	afi_writel(size >> 12, AFI_AXI_BAR5_SZ);
-	afi_writel(fpci_bar, AFI_FPCI_BAR5);
-
-	/* map all upstream transactions as uncached */
-	afi_writel(PHYS_OFFSET, AFI_CACHE_BAR0_ST);
-	afi_writel(0, AFI_CACHE_BAR0_SZ);
-	afi_writel(0, AFI_CACHE_BAR1_ST);
-	afi_writel(0, AFI_CACHE_BAR1_SZ);
-
-	/* No MSI */
-	afi_writel(0, AFI_MSI_FPCI_BAR_ST);
-	afi_writel(0, AFI_MSI_BAR_SZ);
-	afi_writel(0, AFI_MSI_AXI_BAR_ST);
-	afi_writel(0, AFI_MSI_BAR_SZ);
-}
-
-static int tegra_pcie_enable_controller(void)
-{
-	u32 val, reg;
-	int i, timeout;
-
-	/* Enable slot clock and pulse the reset signals */
-	for (i = 0, reg = AFI_PEX0_CTRL; i < 2; i++, reg += 0x8) {
-		val = afi_readl(reg) |  AFI_PEX_CTRL_REFCLK_EN;
-		afi_writel(val, reg);
-		val &= ~AFI_PEX_CTRL_RST;
-		afi_writel(val, reg);
-
-		val = afi_readl(reg) | AFI_PEX_CTRL_RST;
-		afi_writel(val, reg);
-	}
-
-	/* Enable dual controller and both ports */
-	val = afi_readl(AFI_PCIE_CONFIG);
-	val &= ~(AFI_PCIE_CONFIG_PCIEC0_DISABLE_DEVICE |
-		 AFI_PCIE_CONFIG_PCIEC1_DISABLE_DEVICE |
-		 AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK);
-	val |= AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL;
-	afi_writel(val, AFI_PCIE_CONFIG);
-
-	val = afi_readl(AFI_FUSE) & ~AFI_FUSE_PCIE_T0_GEN2_DIS;
-	afi_writel(val, AFI_FUSE);
-
-	/* Initialze internal PHY, enable up to 16 PCIE lanes */
-	pads_writel(0x0, PADS_CTL_SEL);
-
-	/* override IDDQ to 1 on all 4 lanes */
-	val = pads_readl(PADS_CTL) | PADS_CTL_IDDQ_1L;
-	pads_writel(val, PADS_CTL);
-
-	/*
-	 * set up PHY PLL inputs select PLLE output as refclock,
-	 * set TX ref sel to div10 (not div5)
-	 */
-	val = pads_readl(PADS_PLL_CTL);
-	val &= ~(PADS_PLL_CTL_REFCLK_MASK | PADS_PLL_CTL_TXCLKREF_MASK);
-	val |= (PADS_PLL_CTL_REFCLK_INTERNAL_CML | PADS_PLL_CTL_TXCLKREF_DIV10);
-	pads_writel(val, PADS_PLL_CTL);
-
-	/* take PLL out of reset  */
-	val = pads_readl(PADS_PLL_CTL) | PADS_PLL_CTL_RST_B4SM;
-	pads_writel(val, PADS_PLL_CTL);
-
-	/*
-	 * Hack, set the clock voltage to the DEFAULT provided by hw folks.
-	 * This doesn't exist in the documentation
-	 */
-	pads_writel(0xfa5cfa5c, 0xc8);
-
-	/* Wait for the PLL to lock */
-	timeout = 300;
-	do {
-		val = pads_readl(PADS_PLL_CTL);
-		usleep_range(1000, 1000);
-		if (--timeout == 0) {
-			pr_err("Tegra PCIe error: timeout waiting for PLL\n");
-			return -EBUSY;
-		}
-	} while (!(val & PADS_PLL_CTL_LOCKDET));
-
-	/* turn off IDDQ override */
-	val = pads_readl(PADS_CTL) & ~PADS_CTL_IDDQ_1L;
-	pads_writel(val, PADS_CTL);
-
-	/* enable TX/RX data */
-	val = pads_readl(PADS_CTL);
-	val |= (PADS_CTL_TX_DATA_EN_1L | PADS_CTL_RX_DATA_EN_1L);
-	pads_writel(val, PADS_CTL);
-
-	/* Take the PCIe interface module out of reset */
-	tegra_periph_reset_deassert(tegra_pcie.pcie_xclk);
-
-	/* Finally enable PCIe */
-	val = afi_readl(AFI_CONFIGURATION) | AFI_CONFIGURATION_EN_FPCI;
-	afi_writel(val, AFI_CONFIGURATION);
-
-	val = (AFI_INTR_EN_INI_SLVERR | AFI_INTR_EN_INI_DECERR |
-	       AFI_INTR_EN_TGT_SLVERR | AFI_INTR_EN_TGT_DECERR |
-	       AFI_INTR_EN_TGT_WRERR | AFI_INTR_EN_DFPCI_DECERR);
-	afi_writel(val, AFI_AFI_INTR_ENABLE);
-	afi_writel(0xffffffff, AFI_SM_INTR_ENABLE);
-
-	/* FIXME: No MSI for now, only INT */
-	afi_writel(AFI_INTR_MASK_INT_MASK, AFI_INTR_MASK);
-
-	/* Disable all execptions */
-	afi_writel(0, AFI_FPCI_ERROR_MASKS);
-
-	return 0;
-}
-
-static void tegra_pcie_xclk_clamp(bool clamp)
-{
-	u32 reg;
-
-	reg = pmc_readl(PMC_SCRATCH42) & ~PMC_SCRATCH42_PCX_CLAMP;
-
-	if (clamp)
-		reg |= PMC_SCRATCH42_PCX_CLAMP;
-
-	pmc_writel(reg, PMC_SCRATCH42);
-}
-
-static void tegra_pcie_power_off(void)
-{
-	tegra_periph_reset_assert(tegra_pcie.pcie_xclk);
-	tegra_periph_reset_assert(tegra_pcie.afi_clk);
-	tegra_periph_reset_assert(tegra_pcie.pex_clk);
-
-	tegra_powergate_power_off(TEGRA_POWERGATE_PCIE);
-	tegra_pcie_xclk_clamp(true);
-}
-
-static int tegra_pcie_power_regate(void)
-{
-	int err;
-
-	tegra_pcie_power_off();
-
-	tegra_pcie_xclk_clamp(true);
-
-	tegra_periph_reset_assert(tegra_pcie.pcie_xclk);
-	tegra_periph_reset_assert(tegra_pcie.afi_clk);
-
-	err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_PCIE,
-						tegra_pcie.pex_clk);
-	if (err) {
-		pr_err("PCIE: powerup sequence failed: %d\n", err);
-		return err;
-	}
-
-	tegra_periph_reset_deassert(tegra_pcie.afi_clk);
-
-	tegra_pcie_xclk_clamp(false);
-
-	clk_prepare_enable(tegra_pcie.afi_clk);
-	clk_prepare_enable(tegra_pcie.pex_clk);
-	return clk_prepare_enable(tegra_pcie.pll_e);
-}
-
-static int tegra_pcie_clocks_get(void)
-{
-	int err;
-
-	tegra_pcie.pex_clk = clk_get(NULL, "pex");
-	if (IS_ERR(tegra_pcie.pex_clk))
-		return PTR_ERR(tegra_pcie.pex_clk);
-
-	tegra_pcie.afi_clk = clk_get(NULL, "afi");
-	if (IS_ERR(tegra_pcie.afi_clk)) {
-		err = PTR_ERR(tegra_pcie.afi_clk);
-		goto err_afi_clk;
-	}
-
-	tegra_pcie.pcie_xclk = clk_get(NULL, "pcie_xclk");
-	if (IS_ERR(tegra_pcie.pcie_xclk)) {
-		err =  PTR_ERR(tegra_pcie.pcie_xclk);
-		goto err_pcie_xclk;
-	}
-
-	tegra_pcie.pll_e = clk_get_sys(NULL, "pll_e");
-	if (IS_ERR(tegra_pcie.pll_e)) {
-		err = PTR_ERR(tegra_pcie.pll_e);
-		goto err_pll_e;
-	}
-
-	return 0;
-
-err_pll_e:
-	clk_put(tegra_pcie.pcie_xclk);
-err_pcie_xclk:
-	clk_put(tegra_pcie.afi_clk);
-err_afi_clk:
-	clk_put(tegra_pcie.pex_clk);
-
-	return err;
-}
-
-static void tegra_pcie_clocks_put(void)
-{
-	clk_put(tegra_pcie.pll_e);
-	clk_put(tegra_pcie.pcie_xclk);
-	clk_put(tegra_pcie.afi_clk);
-	clk_put(tegra_pcie.pex_clk);
-}
-
-static int __init tegra_pcie_get_resources(void)
-{
-	int err;
-
-	err = tegra_pcie_clocks_get();
-	if (err) {
-		pr_err("PCIE: failed to get clocks: %d\n", err);
-		return err;
-	}
-
-	err = tegra_pcie_power_regate();
-	if (err) {
-		pr_err("PCIE: failed to power up: %d\n", err);
-		goto err_pwr_on;
-	}
-
-	tegra_pcie.regs = ioremap_nocache(TEGRA_PCIE_BASE, PCIE_IOMAP_SZ);
-	if (tegra_pcie.regs == NULL) {
-		pr_err("PCIE: Failed to map PCI/AFI registers\n");
-		err = -ENOMEM;
-		goto err_map_reg;
-	}
-
-	err = request_irq(INT_PCIE_INTR, tegra_pcie_isr,
-			  IRQF_SHARED, "PCIE", &tegra_pcie);
-	if (err) {
-		pr_err("PCIE: Failed to register IRQ: %d\n", err);
-		goto err_req_io;
-	}
-	set_irq_flags(INT_PCIE_INTR, IRQF_VALID);
-
-	return 0;
-
-err_req_io:
-	iounmap(tegra_pcie.regs);
-err_map_reg:
-	tegra_pcie_power_off();
-err_pwr_on:
-	tegra_pcie_clocks_put();
-
-	return err;
-}
-
-/*
- * FIXME: If there are no PCIe cards attached, then calling this function
- * can result in the increase of the bootup time as there are big timeout
- * loops.
- */
-#define TEGRA_PCIE_LINKUP_TIMEOUT	200	/* up to 1.2 seconds */
-static bool tegra_pcie_check_link(struct tegra_pcie_port *pp, int idx,
-				  u32 reset_reg)
-{
-	u32 reg;
-	int retries = 3;
-	int timeout;
-
-	do {
-		timeout = TEGRA_PCIE_LINKUP_TIMEOUT;
-		while (timeout) {
-			reg = readl(pp->base + RP_VEND_XP);
-
-			if (reg & RP_VEND_XP_DL_UP)
-				break;
-
-			mdelay(1);
-			timeout--;
-		}
-
-		if (!timeout)  {
-			pr_err("PCIE: port %d: link down, retrying\n", idx);
-			goto retry;
-		}
-
-		timeout = TEGRA_PCIE_LINKUP_TIMEOUT;
-		while (timeout) {
-			reg = readl(pp->base + RP_LINK_CONTROL_STATUS);
-
-			if (reg & 0x20000000)
-				return true;
-
-			mdelay(1);
-			timeout--;
-		}
-
-retry:
-		/* Pulse the PEX reset */
-		reg = afi_readl(reset_reg) | AFI_PEX_CTRL_RST;
-		afi_writel(reg, reset_reg);
-		mdelay(1);
-		reg = afi_readl(reset_reg) & ~AFI_PEX_CTRL_RST;
-		afi_writel(reg, reset_reg);
-
-		retries--;
-	} while (retries);
-
-	return false;
-}
-
-static void __init tegra_pcie_add_port(int index, u32 offset, u32 reset_reg)
-{
-	struct tegra_pcie_port *pp;
-
-	pp = tegra_pcie.port + tegra_pcie.num_ports;
-
-	pp->index = -1;
-	pp->base = tegra_pcie.regs + offset;
-	pp->link_up = tegra_pcie_check_link(pp, index, reset_reg);
-
-	if (!pp->link_up) {
-		pp->base = NULL;
-		printk(KERN_INFO "PCIE: port %d: link down, ignoring\n", index);
-		return;
-	}
-
-	tegra_pcie.num_ports++;
-	pp->index = index;
-	pp->root_bus_nr = -1;
-	memset(pp->res, 0, sizeof(pp->res));
-}
-
-int __init tegra_pcie_init(bool init_port0, bool init_port1)
-{
-	int err;
-
-	if (!(init_port0 || init_port1))
-		return -ENODEV;
-
-	pcibios_min_mem = 0;
-
-	err = tegra_pcie_get_resources();
-	if (err)
-		return err;
-
-	err = tegra_pcie_enable_controller();
-	if (err)
-		return err;
-
-	/* setup the AFI address translations */
-	tegra_pcie_setup_translations();
-
-	if (init_port0)
-		tegra_pcie_add_port(0, RP0_OFFSET, AFI_PEX0_CTRL);
-
-	if (init_port1)
-		tegra_pcie_add_port(1, RP1_OFFSET, AFI_PEX1_CTRL);
-
-	pci_common_init(&tegra_pcie_hw);
-
-	return 0;
-}
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index 97b33a2..eb72ae7 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -176,6 +176,8 @@ static int tegra_boot_secondary(unsigned int cpu,
 		return tegra30_boot_secondary(cpu, idle);
 	if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) && tegra_chip_id == TEGRA114)
 		return tegra114_boot_secondary(cpu, idle);
+	if (IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC) && tegra_chip_id == TEGRA124)
+		return tegra114_boot_secondary(cpu, idle);
 
 	return -EINVAL;
 }
@@ -196,6 +198,5 @@ struct smp_operations tegra_smp_ops __initdata = {
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_kill		= tegra_cpu_kill,
 	.cpu_die		= tegra_cpu_die,
-	.cpu_disable		= tegra_cpu_disable,
 #endif
 };
diff --git a/arch/arm/mach-highbank/hotplug.c b/arch/arm/mach-tegra/pm-tegra20.c
index a019e4e..d65e1d7 100644
--- a/arch/arm/mach-highbank/hotplug.c
+++ b/arch/arm/mach-tegra/pm-tegra20.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2011 Calxeda, Inc.
+ * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -10,28 +10,25 @@
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include <linux/kernel.h>
-#include <asm/cacheflush.h>
 
-#include "core.h"
-#include "sysregs.h"
+#include "pm.h"
 
-extern void secondary_startup(void);
+#ifdef CONFIG_PM_SLEEP
+extern u32 tegra20_iram_start, tegra20_iram_end;
+extern void tegra20_sleep_core_finish(unsigned long);
 
-/*
- * platform-specific code to shutdown a CPU
- *
- */
-void __ref highbank_cpu_die(unsigned int cpu)
+void tegra20_lp1_iram_hook(void)
 {
-	highbank_set_cpu_jump(cpu, phys_to_virt(0));
-
-	flush_cache_louis();
-	highbank_set_core_pwr();
+	tegra_lp1_iram.start_addr = &tegra20_iram_start;
+	tegra_lp1_iram.end_addr = &tegra20_iram_end;
+}
 
-	while (1)
-		cpu_do_idle();
+void tegra20_sleep_core_init(void)
+{
+	tegra_sleep_core_finish = tegra20_sleep_core_finish;
 }
+#endif
diff --git a/arch/arm/mach-tegra/pm-tegra30.c b/arch/arm/mach-tegra/pm-tegra30.c
new file mode 100644
index 0000000..8fa326d
--- /dev/null
+++ b/arch/arm/mach-tegra/pm-tegra30.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+
+#include "pm.h"
+
+#ifdef CONFIG_PM_SLEEP
+extern u32 tegra30_iram_start, tegra30_iram_end;
+extern void tegra30_sleep_core_finish(unsigned long);
+
+void tegra30_lp1_iram_hook(void)
+{
+	tegra_lp1_iram.start_addr = &tegra30_iram_start;
+	tegra_lp1_iram.end_addr = &tegra30_iram_end;
+}
+
+void tegra30_sleep_core_init(void)
+{
+	tegra_sleep_core_finish = tegra30_sleep_core_finish;
+}
+#endif
diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c
index 261fec1..4ae0286 100644
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -37,12 +37,18 @@
 #include "reset.h"
 #include "flowctrl.h"
 #include "fuse.h"
+#include "pm.h"
 #include "pmc.h"
 #include "sleep.h"
 
 #ifdef CONFIG_PM_SLEEP
 static DEFINE_SPINLOCK(tegra_lp2_lock);
+static u32 iram_save_size;
+static void *iram_save_addr;
+struct tegra_lp1_iram tegra_lp1_iram;
 void (*tegra_tear_down_cpu)(void);
+void (*tegra_sleep_core_finish)(unsigned long v2p);
+static int (*tegra_sleep_func)(unsigned long v2p);
 
 static void tegra_tear_down_cpu_init(void)
 {
@@ -52,7 +58,11 @@ static void tegra_tear_down_cpu_init(void)
 			tegra_tear_down_cpu = tegra20_tear_down_cpu;
 		break;
 	case TEGRA30:
-		if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC))
+	case TEGRA114:
+	case TEGRA124:
+		if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) ||
+		    IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
+		    IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
 			tegra_tear_down_cpu = tegra30_tear_down_cpu;
 		break;
 	}
@@ -171,19 +181,113 @@ void tegra_idle_lp2_last(void)
 enum tegra_suspend_mode tegra_pm_validate_suspend_mode(
 				enum tegra_suspend_mode mode)
 {
-	/* Tegra114 didn't support any suspending mode yet. */
-	if (tegra_chip_id == TEGRA114)
-		return TEGRA_SUSPEND_NONE;
-
 	/*
-	 * The Tegra devices only support suspending to LP2 currently.
+	 * The Tegra devices support suspending to LP1 or lower currently.
 	 */
-	if (mode > TEGRA_SUSPEND_LP2)
-		return TEGRA_SUSPEND_LP2;
+	if (mode > TEGRA_SUSPEND_LP1)
+		return TEGRA_SUSPEND_LP1;
 
 	return mode;
 }
 
+static int tegra_sleep_core(unsigned long v2p)
+{
+	setup_mm_for_reboot();
+	tegra_sleep_core_finish(v2p);
+
+	/* should never here */
+	BUG();
+
+	return 0;
+}
+
+/*
+ * tegra_lp1_iram_hook
+ *
+ * Hooking the address of LP1 reset vector and SDRAM self-refresh code in
+ * SDRAM. These codes not be copied to IRAM in this fuction. We need to
+ * copy these code to IRAM before LP0/LP1 suspend and restore the content
+ * of IRAM after resume.
+ */
+static bool tegra_lp1_iram_hook(void)
+{
+	switch (tegra_chip_id) {
+	case TEGRA20:
+		if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
+			tegra20_lp1_iram_hook();
+		break;
+	case TEGRA30:
+	case TEGRA114:
+	case TEGRA124:
+		if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) ||
+		    IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
+		    IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
+			tegra30_lp1_iram_hook();
+		break;
+	default:
+		break;
+	}
+
+	if (!tegra_lp1_iram.start_addr || !tegra_lp1_iram.end_addr)
+		return false;
+
+	iram_save_size = tegra_lp1_iram.end_addr - tegra_lp1_iram.start_addr;
+	iram_save_addr = kmalloc(iram_save_size, GFP_KERNEL);
+	if (!iram_save_addr)
+		return false;
+
+	return true;
+}
+
+static bool tegra_sleep_core_init(void)
+{
+	switch (tegra_chip_id) {
+	case TEGRA20:
+		if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
+			tegra20_sleep_core_init();
+		break;
+	case TEGRA30:
+	case TEGRA114:
+	case TEGRA124:
+		if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) ||
+		    IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
+		    IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
+			tegra30_sleep_core_init();
+		break;
+	default:
+		break;
+	}
+
+	if (!tegra_sleep_core_finish)
+		return false;
+
+	return true;
+}
+
+static void tegra_suspend_enter_lp1(void)
+{
+	tegra_pmc_suspend();
+
+	/* copy the reset vector & SDRAM shutdown code into IRAM */
+	memcpy(iram_save_addr, IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA),
+		iram_save_size);
+	memcpy(IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA),
+		tegra_lp1_iram.start_addr, iram_save_size);
+
+	*((u32 *)tegra_cpu_lp1_mask) = 1;
+}
+
+static void tegra_suspend_exit_lp1(void)
+{
+	tegra_pmc_resume();
+
+	/* restore IRAM */
+	memcpy(IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA), iram_save_addr,
+		iram_save_size);
+
+	*(u32 *)tegra_cpu_lp1_mask = 0;
+}
+
 static const char *lp_state[TEGRA_MAX_SUSPEND_MODE] = {
 	[TEGRA_SUSPEND_NONE] = "none",
 	[TEGRA_SUSPEND_LP2] = "LP2",
@@ -207,6 +311,9 @@ static int tegra_suspend_enter(suspend_state_t state)
 
 	suspend_cpu_complex();
 	switch (mode) {
+	case TEGRA_SUSPEND_LP1:
+		tegra_suspend_enter_lp1();
+		break;
 	case TEGRA_SUSPEND_LP2:
 		tegra_set_cpu_in_lp2();
 		break;
@@ -214,9 +321,12 @@ static int tegra_suspend_enter(suspend_state_t state)
 		break;
 	}
 
-	cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu);
+	cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, tegra_sleep_func);
 
 	switch (mode) {
+	case TEGRA_SUSPEND_LP1:
+		tegra_suspend_exit_lp1();
+		break;
 	case TEGRA_SUSPEND_LP2:
 		tegra_clear_cpu_in_lp2();
 		break;
@@ -237,12 +347,36 @@ static const struct platform_suspend_ops tegra_suspend_ops = {
 
 void __init tegra_init_suspend(void)
 {
-	if (tegra_pmc_get_suspend_mode() == TEGRA_SUSPEND_NONE)
+	enum tegra_suspend_mode mode = tegra_pmc_get_suspend_mode();
+
+	if (mode == TEGRA_SUSPEND_NONE)
 		return;
 
 	tegra_tear_down_cpu_init();
 	tegra_pmc_suspend_init();
 
+	if (mode >= TEGRA_SUSPEND_LP1) {
+		if (!tegra_lp1_iram_hook() || !tegra_sleep_core_init()) {
+			pr_err("%s: unable to allocate memory for SDRAM"
+			       "self-refresh -- LP0/LP1 unavailable\n",
+			       __func__);
+			tegra_pmc_set_suspend_mode(TEGRA_SUSPEND_LP2);
+			mode = TEGRA_SUSPEND_LP2;
+		}
+	}
+
+	/* set up sleep function for cpu_suspend */
+	switch (mode) {
+	case TEGRA_SUSPEND_LP1:
+		tegra_sleep_func = tegra_sleep_core;
+		break;
+	case TEGRA_SUSPEND_LP2:
+		tegra_sleep_func = tegra_sleep_cpu;
+		break;
+	default:
+		break;
+	}
+
 	suspend_set_ops(&tegra_suspend_ops);
 }
 #endif
diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h
index 94c4b9d..6e92a7c 100644
--- a/arch/arm/mach-tegra/pm.h
+++ b/arch/arm/mach-tegra/pm.h
@@ -23,10 +23,19 @@
 
 #include "pmc.h"
 
-extern unsigned long l2x0_saved_regs_addr;
+struct tegra_lp1_iram {
+	void	*start_addr;
+	void	*end_addr;
+};
+extern struct tegra_lp1_iram tegra_lp1_iram;
+extern void (*tegra_sleep_core_finish)(unsigned long v2p);
+
+void tegra20_lp1_iram_hook(void);
+void tegra20_sleep_core_init(void);
+void tegra30_lp1_iram_hook(void);
+void tegra30_sleep_core_init(void);
 
-void save_cpu_arch_register(void);
-void restore_cpu_arch_register(void);
+extern unsigned long l2x0_saved_regs_addr;
 
 void tegra_clear_cpu_in_lp2(void);
 bool tegra_set_cpu_in_lp2(void);
diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c
index eb3fa4a..fb79202 100644
--- a/arch/arm/mach-tegra/pmc.c
+++ b/arch/arm/mach-tegra/pmc.c
@@ -20,12 +20,16 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/tegra-powergate.h>
 
+#include "flowctrl.h"
 #include "fuse.h"
 #include "pm.h"
 #include "pmc.h"
 #include "sleep.h"
 
+#define TEGRA_POWER_SYSCLK_POLARITY	(1 << 10)  /* sys clk polarity */
+#define TEGRA_POWER_SYSCLK_OE		(1 << 11)  /* system clock enable */
 #define TEGRA_POWER_EFFECT_LP0		(1 << 14)  /* LP0 when CPU pwr gated */
 #define TEGRA_POWER_CPU_PWRREQ_POLARITY	(1 << 15)  /* CPU pwr req polarity */
 #define TEGRA_POWER_CPU_PWRREQ_OE	(1 << 16)  /* CPU pwr req enable */
@@ -40,12 +44,6 @@
 #define PMC_CPUPWRGOOD_TIMER	0xc8
 #define PMC_CPUPWROFF_TIMER	0xcc
 
-#define TEGRA_POWERGATE_PCIE	3
-#define TEGRA_POWERGATE_VDEC	4
-#define TEGRA_POWERGATE_CPU1	9
-#define TEGRA_POWERGATE_CPU2	10
-#define TEGRA_POWERGATE_CPU3	11
-
 static u8 tegra_cpu_domains[] = {
 	0xFF,			/* not available for CPU0 */
 	TEGRA_POWERGATE_CPU1,
@@ -163,6 +161,15 @@ int tegra_pmc_cpu_remove_clamping(int cpuid)
 	return tegra_pmc_powergate_remove_clamping(id);
 }
 
+void tegra_pmc_restart(enum reboot_mode mode, const char *cmd)
+{
+	u32 val;
+
+	val = tegra_pmc_readl(0);
+	val |= 0x10;
+	tegra_pmc_writel(val, 0);
+}
+
 #ifdef CONFIG_PM_SLEEP
 static void set_power_timers(u32 us_on, u32 us_off, unsigned long rate)
 {
@@ -193,16 +200,50 @@ enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void)
 	return pmc_pm_data.suspend_mode;
 }
 
+void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode)
+{
+	if (mode < TEGRA_SUSPEND_NONE || mode >= TEGRA_MAX_SUSPEND_MODE)
+		return;
+
+	pmc_pm_data.suspend_mode = mode;
+}
+
+void tegra_pmc_suspend(void)
+{
+	tegra_pmc_writel(virt_to_phys(tegra_resume), PMC_SCRATCH41);
+}
+
+void tegra_pmc_resume(void)
+{
+	tegra_pmc_writel(0x0, PMC_SCRATCH41);
+}
+
 void tegra_pmc_pm_set(enum tegra_suspend_mode mode)
 {
-	u32 reg;
+	u32 reg, csr_reg;
 	unsigned long rate = 0;
 
 	reg = tegra_pmc_readl(PMC_CTRL);
 	reg |= TEGRA_POWER_CPU_PWRREQ_OE;
 	reg &= ~TEGRA_POWER_EFFECT_LP0;
 
+	switch (tegra_chip_id) {
+	case TEGRA20:
+	case TEGRA30:
+		break;
+	default:
+		/* Turn off CRAIL */
+		csr_reg = flowctrl_read_cpu_csr(0);
+		csr_reg &= ~FLOW_CTRL_CSR_ENABLE_EXT_MASK;
+		csr_reg |= FLOW_CTRL_CSR_ENABLE_EXT_CRAIL;
+		flowctrl_write_cpu_csr(0, csr_reg);
+		break;
+	}
+
 	switch (mode) {
+	case TEGRA_SUSPEND_LP1:
+		rate = 32768;
+		break;
 	case TEGRA_SUSPEND_LP2:
 		rate = clk_get_rate(tegra_pclk);
 		break;
@@ -224,23 +265,35 @@ void tegra_pmc_suspend_init(void)
 	reg = tegra_pmc_readl(PMC_CTRL);
 	reg |= TEGRA_POWER_CPU_PWRREQ_OE;
 	tegra_pmc_writel(reg, PMC_CTRL);
+
+	reg = tegra_pmc_readl(PMC_CTRL);
+
+	if (!pmc_pm_data.sysclkreq_high)
+		reg |= TEGRA_POWER_SYSCLK_POLARITY;
+	else
+		reg &= ~TEGRA_POWER_SYSCLK_POLARITY;
+
+	/* configure the output polarity while the request is tristated */
+	tegra_pmc_writel(reg, PMC_CTRL);
+
+	/* now enable the request */
+	reg |= TEGRA_POWER_SYSCLK_OE;
+	tegra_pmc_writel(reg, PMC_CTRL);
 }
 #endif
 
 static const struct of_device_id matches[] __initconst = {
+	{ .compatible = "nvidia,tegra124-pmc" },
 	{ .compatible = "nvidia,tegra114-pmc" },
 	{ .compatible = "nvidia,tegra30-pmc" },
 	{ .compatible = "nvidia,tegra20-pmc" },
 	{ }
 };
 
-static void __init tegra_pmc_parse_dt(void)
+void __init tegra_pmc_init_irq(void)
 {
 	struct device_node *np;
-	u32 prop;
-	enum tegra_suspend_mode suspend_mode;
-	u32 core_good_time[2] = {0, 0};
-	u32 lp0_vec[2] = {0, 0};
+	u32 val;
 
 	np = of_find_matching_node(NULL, matches);
 	BUG_ON(!np);
@@ -249,6 +302,26 @@ static void __init tegra_pmc_parse_dt(void)
 
 	tegra_pmc_invert_interrupt = of_property_read_bool(np,
 				     "nvidia,invert-interrupt");
+
+	val = tegra_pmc_readl(PMC_CTRL);
+	if (tegra_pmc_invert_interrupt)
+		val |= PMC_CTRL_INTR_LOW;
+	else
+		val &= ~PMC_CTRL_INTR_LOW;
+	tegra_pmc_writel(val, PMC_CTRL);
+}
+
+void __init tegra_pmc_init(void)
+{
+	struct device_node *np;
+	u32 prop;
+	enum tegra_suspend_mode suspend_mode;
+	u32 core_good_time[2] = {0, 0};
+	u32 lp0_vec[2] = {0, 0};
+
+	np = of_find_matching_node(NULL, matches);
+	BUG_ON(!np);
+
 	tegra_pclk = of_clk_get_by_name(np, "pclk");
 	WARN_ON(IS_ERR(tegra_pclk));
 
@@ -314,17 +387,3 @@ static void __init tegra_pmc_parse_dt(void)
 
 	pmc_pm_data.suspend_mode = suspend_mode;
 }
-
-void __init tegra_pmc_init(void)
-{
-	u32 val;
-
-	tegra_pmc_parse_dt();
-
-	val = tegra_pmc_readl(PMC_CTRL);
-	if (tegra_pmc_invert_interrupt)
-		val |= PMC_CTRL_INTR_LOW;
-	else
-		val &= ~PMC_CTRL_INTR_LOW;
-	tegra_pmc_writel(val, PMC_CTRL);
-}
diff --git a/arch/arm/mach-tegra/pmc.h b/arch/arm/mach-tegra/pmc.h
index e1c2df2..59e19c34 100644
--- a/arch/arm/mach-tegra/pmc.h
+++ b/arch/arm/mach-tegra/pmc.h
@@ -18,6 +18,8 @@
 #ifndef __MACH_TEGRA_PMC_H
 #define __MACH_TEGRA_PMC_H
 
+#include <linux/reboot.h>
+
 enum tegra_suspend_mode {
 	TEGRA_SUSPEND_NONE = 0,
 	TEGRA_SUSPEND_LP2,	/* CPU voltage off */
@@ -28,6 +30,9 @@ enum tegra_suspend_mode {
 
 #ifdef CONFIG_PM_SLEEP
 enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void);
+void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode);
+void tegra_pmc_suspend(void);
+void tegra_pmc_resume(void);
 void tegra_pmc_pm_set(enum tegra_suspend_mode mode);
 void tegra_pmc_suspend_init(void);
 #endif
@@ -36,6 +41,9 @@ bool tegra_pmc_cpu_is_powered(int cpuid);
 int tegra_pmc_cpu_power_on(int cpuid);
 int tegra_pmc_cpu_remove_clamping(int cpuid);
 
+void tegra_pmc_restart(enum reboot_mode mode, const char *cmd);
+
+void tegra_pmc_init_irq(void);
 void tegra_pmc_init(void);
 
 #endif
diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c
index f076f0f..85d28e7 100644
--- a/arch/arm/mach-tegra/powergate.c
+++ b/arch/arm/mach-tegra/powergate.c
@@ -42,8 +42,16 @@
 
 static int tegra_num_powerdomains;
 static int tegra_num_cpu_domains;
-static u8 *tegra_cpu_domains;
-static u8 tegra30_cpu_domains[] = {
+static const u8 *tegra_cpu_domains;
+
+static const u8 tegra30_cpu_domains[] = {
+	TEGRA_POWERGATE_CPU,
+	TEGRA_POWERGATE_CPU1,
+	TEGRA_POWERGATE_CPU2,
+	TEGRA_POWERGATE_CPU3,
+};
+
+static const u8 tegra114_cpu_domains[] = {
 	TEGRA_POWERGATE_CPU0,
 	TEGRA_POWERGATE_CPU1,
 	TEGRA_POWERGATE_CPU2,
@@ -189,6 +197,11 @@ int __init tegra_powergate_init(void)
 		tegra_num_cpu_domains = 4;
 		tegra_cpu_domains = tegra30_cpu_domains;
 		break;
+	case TEGRA114:
+		tegra_num_powerdomains = 23;
+		tegra_num_cpu_domains = 4;
+		tegra_cpu_domains = tegra114_cpu_domains;
+		break;
 	default:
 		/* Unknown Tegra variant. Disable powergating */
 		tegra_num_powerdomains = 0;
@@ -229,6 +242,27 @@ static const char * const powergate_name_t30[] = {
 	[TEGRA_POWERGATE_3D1]	= "3d1",
 };
 
+static const char * const powergate_name_t114[] = {
+	[TEGRA_POWERGATE_CPU]	= "cpu0",
+	[TEGRA_POWERGATE_3D]	= "3d",
+	[TEGRA_POWERGATE_VENC]	= "venc",
+	[TEGRA_POWERGATE_VDEC]	= "vdec",
+	[TEGRA_POWERGATE_MPE]	= "mpe",
+	[TEGRA_POWERGATE_HEG]	= "heg",
+	[TEGRA_POWERGATE_CPU1]	= "cpu1",
+	[TEGRA_POWERGATE_CPU2]	= "cpu2",
+	[TEGRA_POWERGATE_CPU3]	= "cpu3",
+	[TEGRA_POWERGATE_CELP]	= "celp",
+	[TEGRA_POWERGATE_CPU0]	= "cpu0",
+	[TEGRA_POWERGATE_C0NC]	= "c0nc",
+	[TEGRA_POWERGATE_C1NC]	= "c1nc",
+	[TEGRA_POWERGATE_DIS]	= "dis",
+	[TEGRA_POWERGATE_DISB]	= "disb",
+	[TEGRA_POWERGATE_XUSBA]	= "xusba",
+	[TEGRA_POWERGATE_XUSBB]	= "xusbb",
+	[TEGRA_POWERGATE_XUSBC]	= "xusbc",
+};
+
 static int powergate_show(struct seq_file *s, void *data)
 {
 	int i;
@@ -236,9 +270,14 @@ static int powergate_show(struct seq_file *s, void *data)
 	seq_printf(s, " powergate powered\n");
 	seq_printf(s, "------------------\n");
 
-	for (i = 0; i < tegra_num_powerdomains; i++)
+	for (i = 0; i < tegra_num_powerdomains; i++) {
+		if (!powergate_name[i])
+			continue;
+
 		seq_printf(s, " %9s %7s\n", powergate_name[i],
 			tegra_powergate_is_powered(i) ? "yes" : "no");
+	}
+
 	return 0;
 }
 
@@ -265,6 +304,9 @@ int __init tegra_powergate_debugfs_init(void)
 	case TEGRA30:
 		powergate_name = powergate_name_t30;
 		break;
+	case TEGRA114:
+		powergate_name = powergate_name_t114;
+		break;
 	}
 
 	if (powergate_name) {
diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S
index 39dc9e7..8c1ba4fe 100644
--- a/arch/arm/mach-tegra/reset-handler.S
+++ b/arch/arm/mach-tegra/reset-handler.S
@@ -40,19 +40,16 @@
  *	  re-enabling sdram.
  *
  *	r6: SoC ID
+ *	r8: CPU part number
  */
 ENTRY(tegra_resume)
-	bl	v7_invalidate_l1
+	check_cpu_part_num 0xc09, r8, r9
+	bleq	v7_invalidate_l1
 
 	cpu_id	r0
-	tegra_get_soc_id TEGRA_APB_MISC_BASE, r6
-	cmp	r6, #TEGRA114
-	beq	no_cpu0_chk
-
 	cmp	r0, #0				@ CPU0?
  THUMB(	it	ne )
 	bne	cpu_resume			@ no
-no_cpu0_chk:
 
 	/* Are we on Tegra20? */
 	cmp	r6, #TEGRA20
@@ -70,8 +67,9 @@ no_cpu0_chk:
 	str	r1, [r2]
 1:
 
-	check_cpu_part_num 0xc09, r8, r9
-	bne	not_ca9
+	mov32	r9, 0xc09
+	cmp	r8, r9
+	bne	end_ca9_scu_l2_resume
 #ifdef CONFIG_HAVE_ARM_SCU
 	/* enable SCU */
 	mov32	r0, TEGRA_ARM_PERIF_BASE
@@ -82,7 +80,10 @@ no_cpu0_chk:
 
 	/* L2 cache resume & re-enable */
 	l2_cache_resume r0, r1, r2, l2x0_saved_regs_addr
-not_ca9:
+end_ca9_scu_l2_resume:
+	mov32	r9, 0xc0f
+	cmp	r8, r9
+	bleq	tegra_init_l2_for_a15
 
 	b	cpu_resume
 ENDPROC(tegra_resume)
@@ -178,6 +179,19 @@ after_errata:
 1:
 #endif
 
+	/* Waking up from LP1? */
+	ldr	r8, [r12, #RESET_DATA(MASK_LP1)]
+	tst	r8, r11				@ if in_lp1
+	beq	__is_not_lp1
+	cmp	r10, #0
+	bne	__die				@ only CPU0 can be here
+	ldr	lr, [r12, #RESET_DATA(STARTUP_LP1)]
+	cmp	lr, #0
+	bleq	__die				@ no LP1 startup handler
+ THUMB(	add	lr, lr, #1 )			@ switch to Thumb mode
+	bx	lr
+__is_not_lp1:
+
 	/* Waking up from LP2? */
 	ldr	r9, [r12, #RESET_DATA(MASK_LP2)]
 	tst	r9, r11				@ if in_lp2
diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c
index 1ac434e..568f5bb 100644
--- a/arch/arm/mach-tegra/reset.c
+++ b/arch/arm/mach-tegra/reset.c
@@ -81,6 +81,8 @@ void __init tegra_cpu_reset_handler_init(void)
 #endif
 
 #ifdef CONFIG_PM_SLEEP
+	__tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_LP1] =
+		TEGRA_IRAM_LPx_RESUME_AREA;
 	__tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_LP2] =
 		virt_to_phys((void *)tegra_resume);
 #endif
diff --git a/arch/arm/mach-tegra/reset.h b/arch/arm/mach-tegra/reset.h
index c90d8e9..76a9343 100644
--- a/arch/arm/mach-tegra/reset.h
+++ b/arch/arm/mach-tegra/reset.h
@@ -39,6 +39,10 @@ void __tegra_cpu_reset_handler_end(void);
 void tegra_secondary_startup(void);
 
 #ifdef CONFIG_PM_SLEEP
+#define tegra_cpu_lp1_mask \
+	(IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \
+	((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_LP1] - \
+	 (u32)__tegra_cpu_reset_handler_start)))
 #define tegra_cpu_lp2_mask \
 	(IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \
 	((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_LP2] - \
diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S
index e3f2417..aaaf3ab 100644
--- a/arch/arm/mach-tegra/sleep-tegra20.S
+++ b/arch/arm/mach-tegra/sleep-tegra20.S
@@ -23,10 +23,50 @@
 #include <asm/assembler.h>
 #include <asm/proc-fns.h>
 #include <asm/cp15.h>
+#include <asm/cache.h>
 
+#include "irammap.h"
 #include "sleep.h"
 #include "flowctrl.h"
 
+#define EMC_CFG				0xc
+#define EMC_ADR_CFG			0x10
+#define EMC_REFRESH			0x70
+#define EMC_NOP				0xdc
+#define EMC_SELF_REF			0xe0
+#define EMC_REQ_CTRL			0x2b0
+#define EMC_EMC_STATUS			0x2b4
+
+#define CLK_RESET_CCLK_BURST		0x20
+#define CLK_RESET_CCLK_DIVIDER		0x24
+#define CLK_RESET_SCLK_BURST		0x28
+#define CLK_RESET_SCLK_DIVIDER		0x2c
+#define CLK_RESET_PLLC_BASE		0x80
+#define CLK_RESET_PLLM_BASE		0x90
+#define CLK_RESET_PLLP_BASE		0xa0
+
+#define APB_MISC_XM2CFGCPADCTRL		0x8c8
+#define APB_MISC_XM2CFGDPADCTRL		0x8cc
+#define APB_MISC_XM2CLKCFGPADCTRL	0x8d0
+#define APB_MISC_XM2COMPPADCTRL		0x8d4
+#define APB_MISC_XM2VTTGENPADCTRL	0x8d8
+#define APB_MISC_XM2CFGCPADCTRL2	0x8e4
+#define APB_MISC_XM2CFGDPADCTRL2	0x8e8
+
+.macro pll_enable, rd, r_car_base, pll_base
+	ldr	\rd, [\r_car_base, #\pll_base]
+	tst	\rd, #(1 << 30)
+	orreq	\rd, \rd, #(1 << 30)
+	streq	\rd, [\r_car_base, #\pll_base]
+.endm
+
+.macro emc_device_mask, rd, base
+	ldr	\rd, [\base, #EMC_ADR_CFG]
+	tst	\rd, #(0x3 << 24)
+	moveq	\rd, #(0x1 << 8)		@ just 1 device
+	movne	\rd, #(0x3 << 8)		@ 2 devices
+.endm
+
 #if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
 /*
  * tegra20_hotplug_shutdown(void)
@@ -181,6 +221,28 @@ ENTRY(tegra20_cpu_is_resettable_soon)
 ENDPROC(tegra20_cpu_is_resettable_soon)
 
 /*
+ * tegra20_sleep_core_finish(unsigned long v2p)
+ *
+ * Enters suspend in LP0 or LP1 by turning off the mmu and jumping to
+ * tegra20_tear_down_core in IRAM
+ */
+ENTRY(tegra20_sleep_core_finish)
+	/* Flush, disable the L1 data cache and exit SMP */
+	bl	tegra_disable_clean_inv_dcache
+
+	mov32	r3, tegra_shut_off_mmu
+	add	r3, r3, r0
+
+	mov32	r0, tegra20_tear_down_core
+	mov32	r1, tegra20_iram_start
+	sub	r0, r0, r1
+	mov32	r1, TEGRA_IRAM_LPx_RESUME_AREA
+	add	r0, r0, r1
+
+	mov	pc, r3
+ENDPROC(tegra20_sleep_core_finish)
+
+/*
  * tegra20_sleep_cpu_secondary_finish(unsigned long v2p)
  *
  * Enters WFI on secondary CPU by exiting coherency.
@@ -191,6 +253,7 @@ ENTRY(tegra20_sleep_cpu_secondary_finish)
 	mrc	p15, 0, r11, c1, c0, 1  @ save actlr before exiting coherency
 
 	/* Flush and disable the L1 data cache */
+	mov	r0, #TEGRA_FLUSH_CACHE_LOUIS
 	bl	tegra_disable_clean_inv_dcache
 
 	mov32	r0, TEGRA_PMC_VIRT + PMC_SCRATCH41
@@ -250,6 +313,150 @@ ENTRY(tegra20_tear_down_cpu)
 	b	tegra20_enter_sleep
 ENDPROC(tegra20_tear_down_cpu)
 
+/* START OF ROUTINES COPIED TO IRAM */
+	.align L1_CACHE_SHIFT
+	.globl tegra20_iram_start
+tegra20_iram_start:
+
+/*
+ * tegra20_lp1_reset
+ *
+ * reset vector for LP1 restore; copied into IRAM during suspend.
+ * Brings the system back up to a safe staring point (SDRAM out of
+ * self-refresh, PLLC, PLLM and PLLP reenabled, CPU running on PLLP,
+ * system clock running on the same PLL that it suspended at), and
+ * jumps to tegra_resume to restore virtual addressing and PLLX.
+ * The physical address of tegra_resume expected to be stored in
+ * PMC_SCRATCH41.
+ *
+ * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_LPx_RESUME_AREA.
+ */
+ENTRY(tegra20_lp1_reset)
+	/*
+	 * The CPU and system bus are running at 32KHz and executing from
+	 * IRAM when this code is executed; immediately switch to CLKM and
+	 * enable PLLM, PLLP, PLLC.
+	 */
+	mov32	r0, TEGRA_CLK_RESET_BASE
+
+	mov	r1, #(1 << 28)
+	str	r1, [r0, #CLK_RESET_SCLK_BURST]
+	str	r1, [r0, #CLK_RESET_CCLK_BURST]
+	mov	r1, #0
+	str	r1, [r0, #CLK_RESET_CCLK_DIVIDER]
+	str	r1, [r0, #CLK_RESET_SCLK_DIVIDER]
+
+	pll_enable r1, r0, CLK_RESET_PLLM_BASE
+	pll_enable r1, r0, CLK_RESET_PLLP_BASE
+	pll_enable r1, r0, CLK_RESET_PLLC_BASE
+
+	adr	r2, tegra20_sdram_pad_address
+	adr	r4, tegra20_sdram_pad_save
+	mov	r5, #0
+
+	ldr	r6, tegra20_sdram_pad_size
+padload:
+	ldr	r7, [r2, r5]		@ r7 is the addr in the pad_address
+
+	ldr	r1, [r4, r5]
+	str	r1, [r7]		@ restore the value in pad_save
+
+	add	r5, r5, #4
+	cmp	r6, r5
+	bne	padload
+
+padload_done:
+	/* 255uS delay for PLL stabilization */
+	mov32	r7, TEGRA_TMRUS_BASE
+	ldr	r1, [r7]
+	add	r1, r1, #0xff
+	wait_until r1, r7, r9
+
+	adr	r4, tegra20_sclk_save
+	ldr	r4, [r4]
+	str	r4, [r0, #CLK_RESET_SCLK_BURST]
+	mov32	r4, ((1 << 28) | (4))	@ burst policy is PLLP
+	str	r4, [r0, #CLK_RESET_CCLK_BURST]
+
+	mov32	r0, TEGRA_EMC_BASE
+	ldr	r1, [r0, #EMC_CFG]
+	bic	r1, r1, #(1 << 31)	@ disable DRAM_CLK_STOP
+	str	r1, [r0, #EMC_CFG]
+
+	mov	r1, #0
+	str	r1, [r0, #EMC_SELF_REF]	@ take DRAM out of self refresh
+	mov	r1, #1
+	str	r1, [r0, #EMC_NOP]
+	str	r1, [r0, #EMC_NOP]
+	str	r1, [r0, #EMC_REFRESH]
+
+	emc_device_mask r1, r0
+
+exit_selfrefresh_loop:
+	ldr	r2, [r0, #EMC_EMC_STATUS]
+	ands	r2, r2, r1
+	bne	exit_selfrefresh_loop
+
+	mov	r1, #0			@ unstall all transactions
+	str	r1, [r0, #EMC_REQ_CTRL]
+
+	mov32	r0, TEGRA_PMC_BASE
+	ldr	r0, [r0, #PMC_SCRATCH41]
+	mov	pc, r0			@ jump to tegra_resume
+ENDPROC(tegra20_lp1_reset)
+
+/*
+ * tegra20_tear_down_core
+ *
+ * copied into and executed from IRAM
+ * puts memory in self-refresh for LP0 and LP1
+ */
+tegra20_tear_down_core:
+	bl	tegra20_sdram_self_refresh
+	bl	tegra20_switch_cpu_to_clk32k
+	b	tegra20_enter_sleep
+
+/*
+ * tegra20_switch_cpu_to_clk32k
+ *
+ * In LP0 and LP1 all PLLs will be turned off. Switch the CPU and system clock
+ * to the 32KHz clock.
+ */
+tegra20_switch_cpu_to_clk32k:
+	/*
+	 * start by switching to CLKM to safely disable PLLs, then switch to
+	 * CLKS.
+	 */
+	mov	r0, #(1 << 28)
+	str	r0, [r5, #CLK_RESET_SCLK_BURST]
+	str	r0, [r5, #CLK_RESET_CCLK_BURST]
+	mov	r0, #0
+	str	r0, [r5, #CLK_RESET_CCLK_DIVIDER]
+	str	r0, [r5, #CLK_RESET_SCLK_DIVIDER]
+
+	/* 2uS delay delay between changing SCLK and disabling PLLs */
+	mov32	r7, TEGRA_TMRUS_BASE
+	ldr	r1, [r7]
+	add	r1, r1, #2
+	wait_until r1, r7, r9
+
+	/* disable PLLM, PLLP and PLLC */
+	ldr	r0, [r5, #CLK_RESET_PLLM_BASE]
+	bic	r0, r0, #(1 << 30)
+	str	r0, [r5, #CLK_RESET_PLLM_BASE]
+	ldr	r0, [r5, #CLK_RESET_PLLP_BASE]
+	bic	r0, r0, #(1 << 30)
+	str	r0, [r5, #CLK_RESET_PLLP_BASE]
+	ldr	r0, [r5, #CLK_RESET_PLLC_BASE]
+	bic	r0, r0, #(1 << 30)
+	str	r0, [r5, #CLK_RESET_PLLC_BASE]
+
+	/* switch to CLKS */
+	mov	r0, #0	/* brust policy = 32KHz */
+	str	r0, [r5, #CLK_RESET_SCLK_BURST]
+
+	mov	pc, lr
+
 /*
  * tegra20_enter_sleep
  *
@@ -274,4 +481,95 @@ halted:
 	isb
 	b	halted
 
+/*
+ * tegra20_sdram_self_refresh
+ *
+ * called with MMU off and caches disabled
+ * puts sdram in self refresh
+ * must be executed from IRAM
+ */
+tegra20_sdram_self_refresh:
+	mov32	r1, TEGRA_EMC_BASE	@ r1 reserved for emc base addr
+
+	mov	r2, #3
+	str	r2, [r1, #EMC_REQ_CTRL]	@ stall incoming DRAM requests
+
+emcidle:
+	ldr	r2, [r1, #EMC_EMC_STATUS]
+	tst	r2, #4
+	beq	emcidle
+
+	mov	r2, #1
+	str	r2, [r1, #EMC_SELF_REF]
+
+	emc_device_mask r2, r1
+
+emcself:
+	ldr	r3, [r1, #EMC_EMC_STATUS]
+	and	r3, r3, r2
+	cmp	r3, r2
+	bne	emcself			@ loop until DDR in self-refresh
+
+	adr	r2, tegra20_sdram_pad_address
+	adr	r3, tegra20_sdram_pad_safe
+	adr	r4, tegra20_sdram_pad_save
+	mov	r5, #0
+
+	ldr	r6, tegra20_sdram_pad_size
+padsave:
+	ldr	r0, [r2, r5]		@ r0 is the addr in the pad_address
+
+	ldr	r1, [r0]
+	str	r1, [r4, r5]		@ save the content of the addr
+
+	ldr	r1, [r3, r5]
+	str	r1, [r0]		@ set the save val to the addr
+
+	add	r5, r5, #4
+	cmp	r6, r5
+	bne	padsave
+padsave_done:
+
+	mov32	r5, TEGRA_CLK_RESET_BASE
+	ldr	r0, [r5, #CLK_RESET_SCLK_BURST]
+	adr	r2, tegra20_sclk_save
+	str	r0, [r2]
+	dsb
+	mov	pc, lr
+
+tegra20_sdram_pad_address:
+	.word	TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGCPADCTRL
+	.word	TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGDPADCTRL
+	.word	TEGRA_APB_MISC_BASE + APB_MISC_XM2CLKCFGPADCTRL
+	.word	TEGRA_APB_MISC_BASE + APB_MISC_XM2COMPPADCTRL
+	.word	TEGRA_APB_MISC_BASE + APB_MISC_XM2VTTGENPADCTRL
+	.word	TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGCPADCTRL2
+	.word	TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGDPADCTRL2
+
+tegra20_sdram_pad_size:
+	.word	tegra20_sdram_pad_size - tegra20_sdram_pad_address
+
+tegra20_sdram_pad_safe:
+	.word	0x8
+	.word	0x8
+	.word	0x0
+	.word	0x8
+	.word	0x5500
+	.word	0x08080040
+	.word	0x0
+
+tegra20_sclk_save:
+	.word	0x0
+
+tegra20_sdram_pad_save:
+	.rept (tegra20_sdram_pad_size - tegra20_sdram_pad_address) / 4
+	.long	0
+	.endr
+
+	.ltorg
+/* dummy symbol for end of IRAM */
+	.align L1_CACHE_SHIFT
+	.globl tegra20_iram_end
+tegra20_iram_end:
+	b	.
 #endif
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
index ada8821..b16d4a57 100644
--- a/arch/arm/mach-tegra/sleep-tegra30.S
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -18,13 +18,119 @@
 
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
+#include <asm/cache.h>
 
+#include "irammap.h"
 #include "fuse.h"
 #include "sleep.h"
 #include "flowctrl.h"
 
+#define EMC_CFG				0xc
+#define EMC_ADR_CFG			0x10
+#define EMC_TIMING_CONTROL		0x28
+#define EMC_REFRESH			0x70
+#define EMC_NOP				0xdc
+#define EMC_SELF_REF			0xe0
+#define EMC_MRW				0xe8
+#define EMC_FBIO_CFG5			0x104
+#define EMC_AUTO_CAL_CONFIG		0x2a4
+#define EMC_AUTO_CAL_INTERVAL		0x2a8
+#define EMC_AUTO_CAL_STATUS		0x2ac
+#define EMC_REQ_CTRL			0x2b0
+#define EMC_CFG_DIG_DLL			0x2bc
+#define EMC_EMC_STATUS			0x2b4
+#define EMC_ZCAL_INTERVAL		0x2e0
+#define EMC_ZQ_CAL			0x2ec
+#define EMC_XM2VTTGENPADCTRL		0x310
+#define EMC_XM2VTTGENPADCTRL2		0x314
+
+#define PMC_CTRL			0x0
+#define PMC_CTRL_SIDE_EFFECT_LP0 (1 << 14) /* enter LP0 when CPU pwr gated */
+
+#define PMC_PLLP_WB0_OVERRIDE		0xf8
+#define PMC_IO_DPD_REQ			0x1b8
+#define PMC_IO_DPD_STATUS		0x1bc
+
+#define CLK_RESET_CCLK_BURST		0x20
+#define CLK_RESET_CCLK_DIVIDER		0x24
+#define CLK_RESET_SCLK_BURST		0x28
+#define CLK_RESET_SCLK_DIVIDER		0x2c
+
+#define CLK_RESET_PLLC_BASE		0x80
+#define CLK_RESET_PLLC_MISC		0x8c
+#define CLK_RESET_PLLM_BASE		0x90
+#define CLK_RESET_PLLM_MISC		0x9c
+#define CLK_RESET_PLLP_BASE		0xa0
+#define CLK_RESET_PLLP_MISC		0xac
+#define CLK_RESET_PLLA_BASE		0xb0
+#define CLK_RESET_PLLA_MISC		0xbc
+#define CLK_RESET_PLLX_BASE		0xe0
+#define CLK_RESET_PLLX_MISC		0xe4
+#define CLK_RESET_PLLX_MISC3		0x518
+#define CLK_RESET_PLLX_MISC3_IDDQ	3
+#define CLK_RESET_PLLM_MISC_IDDQ	5
+#define CLK_RESET_PLLC_MISC_IDDQ	26
+
+#define CLK_RESET_CLK_SOURCE_MSELECT	0x3b4
+
+#define MSELECT_CLKM			(0x3 << 30)
+
+#define LOCK_DELAY 50 /* safety delay after lock is detected */
+
 #define TEGRA30_POWER_HOTPLUG_SHUTDOWN	(1 << 27) /* Hotplug shutdown */
 
+.macro emc_device_mask, rd, base
+	ldr	\rd, [\base, #EMC_ADR_CFG]
+	tst	\rd, #0x1
+	moveq	\rd, #(0x1 << 8)		@ just 1 device
+	movne	\rd, #(0x3 << 8)		@ 2 devices
+.endm
+
+.macro emc_timing_update, rd, base
+	mov	\rd, #1
+	str	\rd, [\base, #EMC_TIMING_CONTROL]
+1001:
+	ldr	\rd, [\base, #EMC_EMC_STATUS]
+	tst	\rd, #(0x1<<23)	@ wait EMC_STATUS_TIMING_UPDATE_STALLED is clear
+	bne	1001b
+.endm
+
+.macro pll_enable, rd, r_car_base, pll_base, pll_misc
+	ldr	\rd, [\r_car_base, #\pll_base]
+	tst	\rd, #(1 << 30)
+	orreq	\rd, \rd, #(1 << 30)
+	streq	\rd, [\r_car_base, #\pll_base]
+	/* Enable lock detector */
+	.if	\pll_misc
+	ldr	\rd, [\r_car_base, #\pll_misc]
+	bic	\rd, \rd, #(1 << 18)
+	str	\rd, [\r_car_base, #\pll_misc]
+	ldr	\rd, [\r_car_base, #\pll_misc]
+	ldr	\rd, [\r_car_base, #\pll_misc]
+	orr	\rd, \rd, #(1 << 18)
+	str	\rd, [\r_car_base, #\pll_misc]
+	.endif
+.endm
+
+.macro pll_locked, rd, r_car_base, pll_base
+1:
+	ldr	\rd, [\r_car_base, #\pll_base]
+	tst	\rd, #(1 << 27)
+	beq	1b
+.endm
+
+.macro pll_iddq_exit, rd, car, iddq, iddq_bit
+	ldr	\rd, [\car, #\iddq]
+	bic	\rd, \rd, #(1<<\iddq_bit)
+	str	\rd, [\car, #\iddq]
+.endm
+
+.macro pll_iddq_entry, rd, car, iddq, iddq_bit
+	ldr	\rd, [\car, #\iddq]
+	orr	\rd, \rd, #(1<<\iddq_bit)
+	str	\rd, [\car, #\iddq]
+.endm
+
 #if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
 /*
  * tegra30_hotplug_shutdown(void)
@@ -99,6 +205,8 @@ flow_ctrl_setting_for_lp2:
 	cmp	r10, #TEGRA30
 	moveq   r3, #FLOW_CTRL_WAIT_FOR_INTERRUPT	@ For LP2
 	movne	r3, #FLOW_CTRL_WAITEVENT
+	orrne	r3, r3, #FLOW_CTRL_HALT_GIC_IRQ
+	orrne	r3, r3, #FLOW_CTRL_HALT_GIC_FIQ
 flow_ctrl_done:
 	cmp	r10, #TEGRA30
 	str	r3, [r2]
@@ -127,6 +235,41 @@ ENDPROC(tegra30_cpu_shutdown)
 
 #ifdef CONFIG_PM_SLEEP
 /*
+ * tegra30_sleep_core_finish(unsigned long v2p)
+ *
+ * Enters suspend in LP0 or LP1 by turning off the MMU and jumping to
+ * tegra30_tear_down_core in IRAM
+ */
+ENTRY(tegra30_sleep_core_finish)
+	/* Flush, disable the L1 data cache and exit SMP */
+	bl	tegra_disable_clean_inv_dcache
+
+	/*
+	 * Preload all the address literals that are needed for the
+	 * CPU power-gating process, to avoid loading from SDRAM which
+	 * are not supported once SDRAM is put into self-refresh.
+	 * LP0 / LP1 use physical address, since the MMU needs to be
+	 * disabled before putting SDRAM into self-refresh to avoid
+	 * memory access due to page table walks.
+	 */
+	mov32	r4, TEGRA_PMC_BASE
+	mov32	r5, TEGRA_CLK_RESET_BASE
+	mov32	r6, TEGRA_FLOW_CTRL_BASE
+	mov32	r7, TEGRA_TMRUS_BASE
+
+	mov32	r3, tegra_shut_off_mmu
+	add	r3, r3, r0
+
+	mov32	r0, tegra30_tear_down_core
+	mov32	r1, tegra30_iram_start
+	sub	r0, r0, r1
+	mov32	r1, TEGRA_IRAM_LPx_RESUME_AREA
+	add	r0, r0, r1
+
+	mov	pc, r3
+ENDPROC(tegra30_sleep_core_finish)
+
+/*
  * tegra30_sleep_cpu_secondary_finish(unsigned long v2p)
  *
  * Enters LP2 on secondary CPU by exiting coherency and powergating the CPU.
@@ -135,6 +278,7 @@ ENTRY(tegra30_sleep_cpu_secondary_finish)
 	mov	r7, lr
 
 	/* Flush and disable the L1 data cache */
+	mov 	r0, #TEGRA_FLUSH_CACHE_LOUIS
 	bl	tegra_disable_clean_inv_dcache
 
 	/* Powergate this CPU. */
@@ -155,6 +299,368 @@ ENTRY(tegra30_tear_down_cpu)
 	b	tegra30_enter_sleep
 ENDPROC(tegra30_tear_down_cpu)
 
+/* START OF ROUTINES COPIED TO IRAM */
+	.align L1_CACHE_SHIFT
+	.globl tegra30_iram_start
+tegra30_iram_start:
+
+/*
+ * tegra30_lp1_reset
+ *
+ * reset vector for LP1 restore; copied into IRAM during suspend.
+ * Brings the system back up to a safe staring point (SDRAM out of
+ * self-refresh, PLLC, PLLM and PLLP reenabled, CPU running on PLLX,
+ * system clock running on the same PLL that it suspended at), and
+ * jumps to tegra_resume to restore virtual addressing.
+ * The physical address of tegra_resume expected to be stored in
+ * PMC_SCRATCH41.
+ *
+ * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_LPx_RESUME_AREA.
+ */
+ENTRY(tegra30_lp1_reset)
+	/*
+	 * The CPU and system bus are running at 32KHz and executing from
+	 * IRAM when this code is executed; immediately switch to CLKM and
+	 * enable PLLP, PLLM, PLLC, PLLA and PLLX.
+	 */
+	mov32	r0, TEGRA_CLK_RESET_BASE
+
+	mov	r1, #(1 << 28)
+	str	r1, [r0, #CLK_RESET_SCLK_BURST]
+	str	r1, [r0, #CLK_RESET_CCLK_BURST]
+	mov	r1, #0
+	str	r1, [r0, #CLK_RESET_CCLK_DIVIDER]
+	str	r1, [r0, #CLK_RESET_SCLK_DIVIDER]
+
+	tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
+	cmp	r10, #TEGRA30
+	beq	_no_pll_iddq_exit
+
+	pll_iddq_exit r1, r0, CLK_RESET_PLLM_MISC, CLK_RESET_PLLM_MISC_IDDQ
+	pll_iddq_exit r1, r0, CLK_RESET_PLLC_MISC, CLK_RESET_PLLC_MISC_IDDQ
+	pll_iddq_exit r1, r0, CLK_RESET_PLLX_MISC3, CLK_RESET_PLLX_MISC3_IDDQ
+
+	mov32	r7, TEGRA_TMRUS_BASE
+	ldr	r1, [r7]
+	add	r1, r1, #2
+	wait_until r1, r7, r3
+
+	/* enable PLLM via PMC */
+	mov32	r2, TEGRA_PMC_BASE
+	ldr	r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
+	orr	r1, r1, #(1 << 12)
+	str	r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
+
+	pll_enable r1, r0, CLK_RESET_PLLM_BASE, 0
+	pll_enable r1, r0, CLK_RESET_PLLC_BASE, 0
+	pll_enable r1, r0, CLK_RESET_PLLX_BASE, 0
+
+	b	_pll_m_c_x_done
+
+_no_pll_iddq_exit:
+	/* enable PLLM via PMC */
+	mov32	r2, TEGRA_PMC_BASE
+	ldr	r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
+	orr	r1, r1, #(1 << 12)
+	str	r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
+
+	pll_enable r1, r0, CLK_RESET_PLLM_BASE, CLK_RESET_PLLM_MISC
+	pll_enable r1, r0, CLK_RESET_PLLC_BASE, CLK_RESET_PLLC_MISC
+	pll_enable r1, r0, CLK_RESET_PLLX_BASE, CLK_RESET_PLLX_MISC
+
+_pll_m_c_x_done:
+	pll_enable r1, r0, CLK_RESET_PLLP_BASE, CLK_RESET_PLLP_MISC
+	pll_enable r1, r0, CLK_RESET_PLLA_BASE, CLK_RESET_PLLA_MISC
+
+	pll_locked r1, r0, CLK_RESET_PLLM_BASE
+	pll_locked r1, r0, CLK_RESET_PLLP_BASE
+	pll_locked r1, r0, CLK_RESET_PLLA_BASE
+	pll_locked r1, r0, CLK_RESET_PLLC_BASE
+	pll_locked r1, r0, CLK_RESET_PLLX_BASE
+
+	mov32	r7, TEGRA_TMRUS_BASE
+	ldr	r1, [r7]
+	add	r1, r1, #LOCK_DELAY
+	wait_until r1, r7, r3
+
+	adr	r5, tegra_sdram_pad_save
+
+	ldr	r4, [r5, #0x18]		@ restore CLK_SOURCE_MSELECT
+	str	r4, [r0, #CLK_RESET_CLK_SOURCE_MSELECT]
+
+	ldr	r4, [r5, #0x1C]		@ restore SCLK_BURST
+	str	r4, [r0, #CLK_RESET_SCLK_BURST]
+
+	cmp	r10, #TEGRA30
+	movweq	r4, #:lower16:((1 << 28) | (0x8))	@ burst policy is PLLX
+	movteq	r4, #:upper16:((1 << 28) | (0x8))
+	movwne	r4, #:lower16:((1 << 28) | (0xe))
+	movtne	r4, #:upper16:((1 << 28) | (0xe))
+	str	r4, [r0, #CLK_RESET_CCLK_BURST]
+
+	/* Restore pad power state to normal */
+	ldr	r1, [r5, #0x14]		@ PMC_IO_DPD_STATUS
+	mvn	r1, r1
+	bic	r1, r1, #(1 << 31)
+	orr	r1, r1, #(1 << 30)
+	str	r1, [r2, #PMC_IO_DPD_REQ]	@ DPD_OFF
+
+	cmp	r10, #TEGRA30
+	movweq	r0, #:lower16:TEGRA_EMC_BASE	@ r0 reserved for emc base
+	movteq	r0, #:upper16:TEGRA_EMC_BASE
+	cmp	r10, #TEGRA114
+	movweq	r0, #:lower16:TEGRA_EMC0_BASE
+	movteq	r0, #:upper16:TEGRA_EMC0_BASE
+	cmp	r10, #TEGRA124
+	movweq	r0, #:lower16:TEGRA124_EMC_BASE
+	movteq	r0, #:upper16:TEGRA124_EMC_BASE
+
+exit_self_refresh:
+	ldr	r1, [r5, #0xC]		@ restore EMC_XM2VTTGENPADCTRL
+	str	r1, [r0, #EMC_XM2VTTGENPADCTRL]
+	ldr	r1, [r5, #0x10]		@ restore EMC_XM2VTTGENPADCTRL2
+	str	r1, [r0, #EMC_XM2VTTGENPADCTRL2]
+	ldr	r1, [r5, #0x8]		@ restore EMC_AUTO_CAL_INTERVAL
+	str	r1, [r0, #EMC_AUTO_CAL_INTERVAL]
+
+	/* Relock DLL */
+	ldr	r1, [r0, #EMC_CFG_DIG_DLL]
+	orr	r1, r1, #(1 << 30)	@ set DLL_RESET
+	str	r1, [r0, #EMC_CFG_DIG_DLL]
+
+	emc_timing_update r1, r0
+
+	cmp	r10, #TEGRA114
+	movweq	r1, #:lower16:TEGRA_EMC1_BASE
+	movteq	r1, #:upper16:TEGRA_EMC1_BASE
+	cmpeq	r0, r1
+
+	ldr	r1, [r0, #EMC_AUTO_CAL_CONFIG]
+	orr	r1, r1, #(1 << 31)	@ set AUTO_CAL_ACTIVE
+	orreq	r1, r1, #(1 << 27)	@ set slave mode for channel 1
+	str	r1, [r0, #EMC_AUTO_CAL_CONFIG]
+
+emc_wait_auto_cal_onetime:
+	ldr	r1, [r0, #EMC_AUTO_CAL_STATUS]
+	tst	r1, #(1 << 31)		@ wait until AUTO_CAL_ACTIVE is cleared
+	bne	emc_wait_auto_cal_onetime
+
+	ldr	r1, [r0, #EMC_CFG]
+	bic	r1, r1, #(1 << 31)	@ disable DRAM_CLK_STOP_PD
+	str	r1, [r0, #EMC_CFG]
+
+	mov	r1, #0
+	str	r1, [r0, #EMC_SELF_REF]	@ take DRAM out of self refresh
+	mov	r1, #1
+	cmp	r10, #TEGRA30
+	streq	r1, [r0, #EMC_NOP]
+	streq	r1, [r0, #EMC_NOP]
+	streq	r1, [r0, #EMC_REFRESH]
+
+	emc_device_mask r1, r0
+
+exit_selfrefresh_loop:
+	ldr	r2, [r0, #EMC_EMC_STATUS]
+	ands	r2, r2, r1
+	bne	exit_selfrefresh_loop
+
+	lsr	r1, r1, #8		@ devSel, bit0:dev0, bit1:dev1
+
+	mov32	r7, TEGRA_TMRUS_BASE
+	ldr	r2, [r0, #EMC_FBIO_CFG5]
+
+	and	r2, r2,	#3		@ check DRAM_TYPE
+	cmp	r2, #2
+	beq	emc_lpddr2
+
+	/* Issue a ZQ_CAL for dev0 - DDR3 */
+	mov32	r2, 0x80000011		@ DEV_SELECTION=2, LENGTH=LONG, CMD=1
+	str	r2, [r0, #EMC_ZQ_CAL]
+	ldr	r2, [r7]
+	add	r2, r2, #10
+	wait_until r2, r7, r3
+
+	tst	r1, #2
+	beq	zcal_done
+
+	/* Issue a ZQ_CAL for dev1 - DDR3 */
+	mov32	r2, 0x40000011		@ DEV_SELECTION=1, LENGTH=LONG, CMD=1
+	str	r2, [r0, #EMC_ZQ_CAL]
+	ldr	r2, [r7]
+	add	r2, r2, #10
+	wait_until r2, r7, r3
+	b	zcal_done
+
+emc_lpddr2:
+	/* Issue a ZQ_CAL for dev0 - LPDDR2 */
+	mov32	r2, 0x800A00AB		@ DEV_SELECTION=2, MA=10, OP=0xAB
+	str	r2, [r0, #EMC_MRW]
+	ldr	r2, [r7]
+	add	r2, r2, #1
+	wait_until r2, r7, r3
+
+	tst	r1, #2
+	beq	zcal_done
+
+	/* Issue a ZQ_CAL for dev0 - LPDDR2 */
+	mov32	r2, 0x400A00AB		@ DEV_SELECTION=1, MA=10, OP=0xAB
+	str	r2, [r0, #EMC_MRW]
+	ldr	r2, [r7]
+	add	r2, r2, #1
+	wait_until r2, r7, r3
+
+zcal_done:
+	mov	r1, #0			@ unstall all transactions
+	str	r1, [r0, #EMC_REQ_CTRL]
+	ldr	r1, [r5, #0x4]		@ restore EMC_ZCAL_INTERVAL
+	str	r1, [r0, #EMC_ZCAL_INTERVAL]
+	ldr	r1, [r5, #0x0]		@ restore EMC_CFG
+	str	r1, [r0, #EMC_CFG]
+
+	/* Tegra114 had dual EMC channel, now config the other one */
+	cmp	r10, #TEGRA114
+	bne	__no_dual_emc_chanl
+	mov32	r1, TEGRA_EMC1_BASE
+	cmp	r0, r1
+	movne	r0, r1
+	addne	r5, r5, #0x20
+	bne	exit_self_refresh
+__no_dual_emc_chanl:
+
+	mov32	r0, TEGRA_PMC_BASE
+	ldr	r0, [r0, #PMC_SCRATCH41]
+	mov	pc, r0			@ jump to tegra_resume
+ENDPROC(tegra30_lp1_reset)
+
+	.align	L1_CACHE_SHIFT
+tegra30_sdram_pad_address:
+	.word	TEGRA_EMC_BASE + EMC_CFG				@0x0
+	.word	TEGRA_EMC_BASE + EMC_ZCAL_INTERVAL			@0x4
+	.word	TEGRA_EMC_BASE + EMC_AUTO_CAL_INTERVAL			@0x8
+	.word	TEGRA_EMC_BASE + EMC_XM2VTTGENPADCTRL			@0xc
+	.word	TEGRA_EMC_BASE + EMC_XM2VTTGENPADCTRL2			@0x10
+	.word	TEGRA_PMC_BASE + PMC_IO_DPD_STATUS			@0x14
+	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT	@0x18
+	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST		@0x1c
+tegra30_sdram_pad_address_end:
+
+tegra114_sdram_pad_address:
+	.word	TEGRA_EMC0_BASE + EMC_CFG				@0x0
+	.word	TEGRA_EMC0_BASE + EMC_ZCAL_INTERVAL			@0x4
+	.word	TEGRA_EMC0_BASE + EMC_AUTO_CAL_INTERVAL			@0x8
+	.word	TEGRA_EMC0_BASE + EMC_XM2VTTGENPADCTRL			@0xc
+	.word	TEGRA_EMC0_BASE + EMC_XM2VTTGENPADCTRL2			@0x10
+	.word	TEGRA_PMC_BASE + PMC_IO_DPD_STATUS			@0x14
+	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT	@0x18
+	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST		@0x1c
+	.word	TEGRA_EMC1_BASE + EMC_CFG				@0x20
+	.word	TEGRA_EMC1_BASE + EMC_ZCAL_INTERVAL			@0x24
+	.word	TEGRA_EMC1_BASE + EMC_AUTO_CAL_INTERVAL			@0x28
+	.word	TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL			@0x2c
+	.word	TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL2			@0x30
+tegra114_sdram_pad_adress_end:
+
+tegra124_sdram_pad_address:
+	.word	TEGRA124_EMC_BASE + EMC_CFG				@0x0
+	.word	TEGRA124_EMC_BASE + EMC_ZCAL_INTERVAL			@0x4
+	.word	TEGRA124_EMC_BASE + EMC_AUTO_CAL_INTERVAL		@0x8
+	.word	TEGRA124_EMC_BASE + EMC_XM2VTTGENPADCTRL		@0xc
+	.word	TEGRA124_EMC_BASE + EMC_XM2VTTGENPADCTRL2		@0x10
+	.word	TEGRA_PMC_BASE + PMC_IO_DPD_STATUS			@0x14
+	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT	@0x18
+	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST		@0x1c
+tegra124_sdram_pad_address_end:
+
+tegra30_sdram_pad_size:
+	.word	tegra30_sdram_pad_address_end - tegra30_sdram_pad_address
+
+tegra114_sdram_pad_size:
+	.word	tegra114_sdram_pad_adress_end - tegra114_sdram_pad_address
+
+	.type	tegra_sdram_pad_save, %object
+tegra_sdram_pad_save:
+	.rept (tegra114_sdram_pad_adress_end - tegra114_sdram_pad_address) / 4
+	.long	0
+	.endr
+
+/*
+ * tegra30_tear_down_core
+ *
+ * copied into and executed from IRAM
+ * puts memory in self-refresh for LP0 and LP1
+ */
+tegra30_tear_down_core:
+	bl	tegra30_sdram_self_refresh
+	bl	tegra30_switch_cpu_to_clk32k
+	b	tegra30_enter_sleep
+
+/*
+ * tegra30_switch_cpu_to_clk32k
+ *
+ * In LP0 and LP1 all PLLs will be turned off. Switching the CPU and System CLK
+ * to the 32KHz clock.
+ * r4 = TEGRA_PMC_BASE
+ * r5 = TEGRA_CLK_RESET_BASE
+ * r6 = TEGRA_FLOW_CTRL_BASE
+ * r7 = TEGRA_TMRUS_BASE
+ * r10= SoC ID
+ */
+tegra30_switch_cpu_to_clk32k:
+	/*
+	 * start by jumping to CLKM to safely disable PLLs, then jump to
+	 * CLKS.
+	 */
+	mov	r0, #(1 << 28)
+	str	r0, [r5, #CLK_RESET_SCLK_BURST]
+	/* 2uS delay delay between changing SCLK and CCLK */
+	ldr	r1, [r7]
+	add	r1, r1, #2
+	wait_until r1, r7, r9
+	str	r0, [r5, #CLK_RESET_CCLK_BURST]
+	mov	r0, #0
+	str	r0, [r5, #CLK_RESET_CCLK_DIVIDER]
+	str	r0, [r5, #CLK_RESET_SCLK_DIVIDER]
+
+	/* switch the clock source of mselect to be CLK_M */
+	ldr	r0, [r5, #CLK_RESET_CLK_SOURCE_MSELECT]
+	orr	r0, r0, #MSELECT_CLKM
+	str	r0, [r5, #CLK_RESET_CLK_SOURCE_MSELECT]
+
+	/* 2uS delay delay between changing SCLK and disabling PLLs */
+	ldr	r1, [r7]
+	add	r1, r1, #2
+	wait_until r1, r7, r9
+
+	/* disable PLLM via PMC in LP1 */
+	ldr	r0, [r4, #PMC_PLLP_WB0_OVERRIDE]
+	bic	r0, r0, #(1 << 12)
+	str	r0, [r4, #PMC_PLLP_WB0_OVERRIDE]
+
+	/* disable PLLP, PLLA, PLLC and PLLX */
+	ldr	r0, [r5, #CLK_RESET_PLLP_BASE]
+	bic	r0, r0, #(1 << 30)
+	str	r0, [r5, #CLK_RESET_PLLP_BASE]
+	ldr	r0, [r5, #CLK_RESET_PLLA_BASE]
+	bic	r0, r0, #(1 << 30)
+	str	r0, [r5, #CLK_RESET_PLLA_BASE]
+	ldr	r0, [r5, #CLK_RESET_PLLC_BASE]
+	bic	r0, r0, #(1 << 30)
+	str	r0, [r5, #CLK_RESET_PLLC_BASE]
+	ldr	r0, [r5, #CLK_RESET_PLLX_BASE]
+	bic	r0, r0, #(1 << 30)
+	str	r0, [r5, #CLK_RESET_PLLX_BASE]
+
+	cmp	r10, #TEGRA30
+	beq	_no_pll_in_iddq
+	pll_iddq_entry r1, r5, CLK_RESET_PLLX_MISC3, CLK_RESET_PLLX_MISC3_IDDQ
+_no_pll_in_iddq:
+
+	/* switch to CLKS */
+	mov	r0, #0	/* brust policy = 32KHz */
+	str	r0, [r5, #CLK_RESET_SCLK_BURST]
+
+	mov	pc, lr
+
 /*
  * tegra30_enter_sleep
  *
@@ -172,8 +678,12 @@ tegra30_enter_sleep:
 	orr	r0, r0, #FLOW_CTRL_CSR_ENABLE
 	str	r0, [r6, r2]
 
+	tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
+	cmp	r10, #TEGRA30
 	mov	r0, #FLOW_CTRL_WAIT_FOR_INTERRUPT
-	orr	r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ
+	orreq	r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ
+	orrne   r0, r0, #FLOW_CTRL_HALT_LIC_IRQ | FLOW_CTRL_HALT_LIC_FIQ
+
 	cpu_to_halt_reg r2, r1
 	str	r0, [r6, r2]
 	dsb
@@ -187,4 +697,134 @@ halted:
 	/* !!!FIXME!!! Implement halt failure handler */
 	b	halted
 
+/*
+ * tegra30_sdram_self_refresh
+ *
+ * called with MMU off and caches disabled
+ * must be executed from IRAM
+ * r4 = TEGRA_PMC_BASE
+ * r5 = TEGRA_CLK_RESET_BASE
+ * r6 = TEGRA_FLOW_CTRL_BASE
+ * r7 = TEGRA_TMRUS_BASE
+ * r10= SoC ID
+ */
+tegra30_sdram_self_refresh:
+
+	adr	r8, tegra_sdram_pad_save
+	tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
+	cmp	r10, #TEGRA30
+	adreq	r2, tegra30_sdram_pad_address
+	ldreq	r3, tegra30_sdram_pad_size
+	cmp	r10, #TEGRA114
+	adreq	r2, tegra114_sdram_pad_address
+	ldreq	r3, tegra114_sdram_pad_size
+	cmp	r10, #TEGRA124
+	adreq	r2, tegra124_sdram_pad_address
+	ldreq	r3, tegra30_sdram_pad_size
+
+	mov	r9, #0
+
+padsave:
+	ldr	r0, [r2, r9]		@ r0 is the addr in the pad_address
+
+	ldr	r1, [r0]
+	str	r1, [r8, r9]		@ save the content of the addr
+
+	add	r9, r9, #4
+	cmp	r3, r9
+	bne	padsave
+padsave_done:
+
+	dsb
+
+	cmp	r10, #TEGRA30
+	ldreq	r0, =TEGRA_EMC_BASE	@ r0 reserved for emc base addr
+	cmp	r10, #TEGRA114
+	ldreq	r0, =TEGRA_EMC0_BASE
+	cmp	r10, #TEGRA124
+	ldreq	r0, =TEGRA124_EMC_BASE
+
+enter_self_refresh:
+	cmp	r10, #TEGRA30
+	mov	r1, #0
+	str	r1, [r0, #EMC_ZCAL_INTERVAL]
+	str	r1, [r0, #EMC_AUTO_CAL_INTERVAL]
+	ldr	r1, [r0, #EMC_CFG]
+	bic	r1, r1, #(1 << 28)
+	bicne	r1, r1, #(1 << 29)
+	str	r1, [r0, #EMC_CFG]	@ disable DYN_SELF_REF
+
+	emc_timing_update r1, r0
+
+	ldr	r1, [r7]
+	add	r1, r1, #5
+	wait_until r1, r7, r2
+
+emc_wait_auto_cal:
+	ldr	r1, [r0, #EMC_AUTO_CAL_STATUS]
+	tst	r1, #(1 << 31)		@ wait until AUTO_CAL_ACTIVE is cleared
+	bne	emc_wait_auto_cal
+
+	mov	r1, #3
+	str	r1, [r0, #EMC_REQ_CTRL]	@ stall incoming DRAM requests
+
+emcidle:
+	ldr	r1, [r0, #EMC_EMC_STATUS]
+	tst	r1, #4
+	beq	emcidle
+
+	mov	r1, #1
+	str	r1, [r0, #EMC_SELF_REF]
+
+	emc_device_mask r1, r0
+
+emcself:
+	ldr	r2, [r0, #EMC_EMC_STATUS]
+	and	r2, r2, r1
+	cmp	r2, r1
+	bne	emcself			@ loop until DDR in self-refresh
+
+	/* Put VTTGEN in the lowest power mode */
+	ldr	r1, [r0, #EMC_XM2VTTGENPADCTRL]
+	mov32	r2, 0xF8F8FFFF	@ clear XM2VTTGEN_DRVUP and XM2VTTGEN_DRVDN
+	and	r1, r1, r2
+	str	r1, [r0, #EMC_XM2VTTGENPADCTRL]
+	ldr	r1, [r0, #EMC_XM2VTTGENPADCTRL2]
+	cmp	r10, #TEGRA30
+	orreq	r1, r1, #7		@ set E_NO_VTTGEN
+	orrne	r1, r1, #0x3f
+	str	r1, [r0, #EMC_XM2VTTGENPADCTRL2]
+
+	emc_timing_update r1, r0
+
+	/* Tegra114 had dual EMC channel, now config the other one */
+	cmp	r10, #TEGRA114
+	bne	no_dual_emc_chanl
+	mov32	r1, TEGRA_EMC1_BASE
+	cmp	r0, r1
+	movne	r0, r1
+	bne	enter_self_refresh
+no_dual_emc_chanl:
+
+	ldr	r1, [r4, #PMC_CTRL]
+	tst	r1, #PMC_CTRL_SIDE_EFFECT_LP0
+	bne	pmc_io_dpd_skip
+	/*
+	 * Put DDR_DATA, DISC_ADDR_CMD, DDR_ADDR_CMD, POP_ADDR_CMD, POP_CLK
+	 * and COMP in the lowest power mode when LP1.
+	 */
+	mov32	r1, 0x8EC00000
+	str	r1, [r4, #PMC_IO_DPD_REQ]
+pmc_io_dpd_skip:
+
+	dsb
+
+	mov	pc, lr
+
+	.ltorg
+/* dummy symbol for end of IRAM */
+	.align L1_CACHE_SHIFT
+	.global tegra30_iram_end
+tegra30_iram_end:
+	b	.
 #endif
diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S
index 9daaef2..8d06213 100644
--- a/arch/arm/mach-tegra/sleep.S
+++ b/arch/arm/mach-tegra/sleep.S
@@ -56,7 +56,9 @@ ENTRY(tegra_disable_clean_inv_dcache)
 	isb
 
 	/* Flush the D-cache */
-	bl	v7_flush_dcache_louis
+	cmp	r0, #TEGRA_FLUSH_CACHE_ALL
+	blne	v7_flush_dcache_louis
+	bleq	v7_flush_dcache_all
 
 	/* Trun off coherency */
 	exit_smp r4, r5
@@ -67,15 +69,40 @@ ENDPROC(tegra_disable_clean_inv_dcache)
 
 #ifdef CONFIG_PM_SLEEP
 /*
+ * tegra_init_l2_for_a15
+ *
+ * set up the correct L2 cache data RAM latency
+ */
+ENTRY(tegra_init_l2_for_a15)
+	mrc	p15, 0, r0, c0, c0, 5
+	ubfx	r0, r0, #8, #4
+	tst	r0, #1				@ only need for cluster 0
+	bne	_exit_init_l2_a15
+
+	mrc	p15, 0x1, r0, c9, c0, 2
+	and	r0, r0, #7
+	cmp	r0, #2
+	bicne	r0, r0, #7
+	orrne	r0, r0, #2
+	mcrne	p15, 0x1, r0, c9, c0, 2
+_exit_init_l2_a15:
+
+	mov	pc, lr
+ENDPROC(tegra_init_l2_for_a15)
+
+/*
  * tegra_sleep_cpu_finish(unsigned long v2p)
  *
  * enters suspend in LP2 by turning off the mmu and jumping to
  * tegra?_tear_down_cpu
  */
 ENTRY(tegra_sleep_cpu_finish)
+	mov	r4, r0
 	/* Flush and disable the L1 data cache */
+	mov	r0, #TEGRA_FLUSH_CACHE_ALL
 	bl	tegra_disable_clean_inv_dcache
 
+	mov	r0, r4
 	mov32	r6, tegra_tear_down_cpu
 	ldr	r1, [r6]
 	add	r1, r1, r0
@@ -107,10 +134,10 @@ ENTRY(tegra_shut_off_mmu)
 #ifdef CONFIG_CACHE_L2X0
 	/* Disable L2 cache */
 	check_cpu_part_num 0xc09, r9, r10
-	movweq	r4, #:lower16:(TEGRA_ARM_PERIF_BASE + 0x3000)
-	movteq	r4, #:upper16:(TEGRA_ARM_PERIF_BASE + 0x3000)
-	moveq	r5, #0
-	streq	r5, [r4, #L2X0_CTRL]
+	movweq	r2, #:lower16:(TEGRA_ARM_PERIF_BASE + 0x3000)
+	movteq	r2, #:upper16:(TEGRA_ARM_PERIF_BASE + 0x3000)
+	moveq	r3, #0
+	streq	r3, [r2, #L2X0_CTRL]
 #endif
 	mov	pc, r0
 ENDPROC(tegra_shut_off_mmu)
diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h
index 98b7da6..a4edbb3 100644
--- a/arch/arm/mach-tegra/sleep.h
+++ b/arch/arm/mach-tegra/sleep.h
@@ -41,7 +41,19 @@
 #define CPU_NOT_RESETTABLE	0
 #endif
 
+/* flag of tegra_disable_clean_inv_dcache to do LoUIS or all */
+#define TEGRA_FLUSH_CACHE_LOUIS	0
+#define TEGRA_FLUSH_CACHE_ALL	1
+
 #ifdef __ASSEMBLY__
+/* waits until the microsecond counter (base) is > rn */
+.macro wait_until, rn, base, tmp
+	add	\rn, \rn, #1
+1001:	ldr	\tmp, [\base]
+	cmp	\tmp, \rn
+	bmi	1001b
+.endm
+
 /* returns the offset of the flow controller halt register for a cpu */
 .macro cpu_to_halt_reg rd, rcpu
 	cmp	\rcpu, #0
@@ -144,7 +156,7 @@ void tegra_pen_lock(void);
 void tegra_pen_unlock(void);
 void tegra_resume(void);
 int tegra_sleep_cpu_finish(unsigned long);
-void tegra_disable_clean_inv_dcache(void);
+void tegra_disable_clean_inv_dcache(u32 flag);
 
 #ifdef CONFIG_HOTPLUG_CPU
 void tegra20_hotplug_shutdown(void);
diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c
index 0d1e412..ce553d5 100644
--- a/arch/arm/mach-tegra/tegra.c
+++ b/arch/arm/mach-tegra/tegra.c
@@ -16,7 +16,6 @@
  *
  */
 
-#include <linux/clocksource.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -29,56 +28,83 @@
 #include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 #include <linux/pda_power.h>
-#include <linux/platform_data/tegra_usb.h>
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/sys_soc.h>
 #include <linux/usb/tegra_usb_phy.h>
 #include <linux/clk/tegra.h>
+#include <linux/irqchip.h>
 
+#include <asm/hardware/cache-l2x0.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/setup.h>
 
+#include "apbio.h"
 #include "board.h"
 #include "common.h"
+#include "cpuidle.h"
 #include "fuse.h"
 #include "iomap.h"
+#include "irq.h"
+#include "pmc.h"
+#include "pm.h"
+#include "reset.h"
+#include "sleep.h"
 
-static struct tegra_ehci_platform_data tegra_ehci1_pdata = {
-	.operating_mode = TEGRA_USB_OTG,
-	.power_down_on_bus_suspend = 1,
-	.vbus_gpio = -1,
+/*
+ * Storage for debug-macro.S's state.
+ *
+ * This must be in .data not .bss so that it gets initialized each time the
+ * kernel is loaded. The data is declared here rather than debug-macro.S so
+ * that multiple inclusions of debug-macro.S point at the same data.
+ */
+u32 tegra_uart_config[4] = {
+	/* Debug UART initialization required */
+	1,
+	/* Debug UART physical address */
+	0,
+	/* Debug UART virtual address */
+	0,
+	/* Scratch space for debug macro */
+	0,
 };
 
-static struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = {
-	.reset_gpio = -1,
-	.clk = "cdev2",
-};
+static void __init tegra_init_cache(void)
+{
+#ifdef CONFIG_CACHE_L2X0
+	int ret;
+	void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000;
+	u32 aux_ctrl, cache_type;
 
-static struct tegra_ehci_platform_data tegra_ehci2_pdata = {
-	.phy_config = &tegra_ehci2_ulpi_phy_config,
-	.operating_mode = TEGRA_USB_HOST,
-	.power_down_on_bus_suspend = 1,
-	.vbus_gpio = -1,
-};
+	cache_type = readl(p + L2X0_CACHE_TYPE);
+	aux_ctrl = (cache_type & 0x700) << (17-8);
+	aux_ctrl |= 0x7C400001;
 
-static struct tegra_ehci_platform_data tegra_ehci3_pdata = {
-	.operating_mode = TEGRA_USB_HOST,
-	.power_down_on_bus_suspend = 1,
-	.vbus_gpio = -1,
-};
+	ret = l2x0_of_init(aux_ctrl, 0x8200c3fe);
+	if (!ret)
+		l2x0_saved_regs_addr = virt_to_phys(&l2x0_saved_regs);
+#endif
+}
 
-static struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("nvidia,tegra20-ehci", 0xC5000000, "tegra-ehci.0",
-		       &tegra_ehci1_pdata),
-	OF_DEV_AUXDATA("nvidia,tegra20-ehci", 0xC5004000, "tegra-ehci.1",
-		       &tegra_ehci2_pdata),
-	OF_DEV_AUXDATA("nvidia,tegra20-ehci", 0xC5008000, "tegra-ehci.2",
-		       &tegra_ehci3_pdata),
-	{}
-};
+static void __init tegra_init_early(void)
+{
+	tegra_cpu_reset_handler_init();
+	tegra_apb_io_init();
+	tegra_init_fuse();
+	tegra_init_cache();
+	tegra_powergate_init();
+	tegra_hotplug_init();
+}
+
+static void __init tegra_dt_init_irq(void)
+{
+	tegra_pmc_init_irq();
+	tegra_init_irq();
+	irqchip_init();
+	tegra_legacy_irq_syscore_init();
+}
 
 static void __init tegra_dt_init(void)
 {
@@ -86,6 +112,8 @@ static void __init tegra_dt_init(void)
 	struct soc_device *soc_dev;
 	struct device *parent = NULL;
 
+	tegra_pmc_init();
+
 	tegra_clocks_apply_init_table();
 
 	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
@@ -112,30 +140,7 @@ static void __init tegra_dt_init(void)
 	 * devices
 	 */
 out:
-	of_platform_populate(NULL, of_default_bus_match_table,
-				tegra20_auxdata_lookup, parent);
-}
-
-static void __init trimslice_init(void)
-{
-#ifdef CONFIG_TEGRA_PCI
-	int ret;
-
-	ret = tegra_pcie_init(true, true);
-	if (ret)
-		pr_err("tegra_pci_init() failed: %d\n", ret);
-#endif
-}
-
-static void __init harmony_init(void)
-{
-#ifdef CONFIG_TEGRA_PCI
-	int ret;
-
-	ret = harmony_pcie_init();
-	if (ret)
-		pr_err("harmony_pcie_init() failed: %d\n", ret);
-#endif
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
 }
 
 static void __init paz00_init(void)
@@ -148,8 +153,6 @@ static struct {
 	char *machine;
 	void (*init)(void);
 } board_init_funcs[] = {
-	{ "compulab,trimslice", trimslice_init },
-	{ "nvidia,harmony", harmony_init },
 	{ "compal,paz00", paz00_init },
 };
 
@@ -157,7 +160,9 @@ static void __init tegra_dt_init_late(void)
 {
 	int i;
 
-	tegra_init_late();
+	tegra_init_suspend();
+	tegra_cpuidle_init();
+	tegra_powergate_debugfs_init();
 
 	for (i = 0; i < ARRAY_SIZE(board_init_funcs); i++) {
 		if (of_machine_is_compatible(board_init_funcs[i].machine)) {
@@ -168,6 +173,7 @@ static void __init tegra_dt_init_late(void)
 }
 
 static const char * const tegra_dt_board_compat[] = {
+	"nvidia,tegra124",
 	"nvidia,tegra114",
 	"nvidia,tegra30",
 	"nvidia,tegra20",
@@ -179,9 +185,8 @@ DT_MACHINE_START(TEGRA_DT, "NVIDIA Tegra SoC (Flattened Device Tree)")
 	.smp		= smp_ops(tegra_smp_ops),
 	.init_early	= tegra_init_early,
 	.init_irq	= tegra_dt_init_irq,
-	.init_time	= clocksource_of_init,
 	.init_machine	= tegra_dt_init,
 	.init_late	= tegra_dt_init_late,
-	.restart	= tegra_assert_system_reset,
+	.restart	= tegra_pmc_restart,
 	.dt_compat	= tegra_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index a85adcd..8e23071 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -1,7 +1,3 @@
-menu "ST-Ericsson AB U300/U335 Platform"
-
-comment "ST-Ericsson Mobile Platform Products"
-
 config ARCH_U300
 	bool "ST-Ericsson U300 Series" if ARCH_MULTI_V5
 	depends on MMU
@@ -9,7 +5,6 @@ config ARCH_U300
 	select ARM_AMBA
 	select ARM_PATCH_PHYS_VIRT
 	select ARM_VIC
-	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select CLKSRC_OF
 	select COMMON_CLK
@@ -25,7 +20,9 @@ config ARCH_U300
 	help
 	  Support for ST-Ericsson U300 series mobile platforms.
 
-comment "ST-Ericsson U300/U335 Feature Selections"
+if ARCH_U300
+
+menu "ST-Ericsson AB U300/U335 Platform"
 
 config MACH_U300
 	depends on ARCH_U300
@@ -53,3 +50,5 @@ config MACH_U300_SPIDUMMY
 		SPI framework and ARM PL022 support.
 
 endmenu
+
+endif
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index b19b072..c67f8ad 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -1,36 +1,31 @@
 config ARCH_U8500
 	bool "ST-Ericsson U8500 Series" if ARCH_MULTI_V7
 	depends on MMU
+	select AB8500_CORE
+	select ABX500_CORE
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
-	select CLKDEV_LOOKUP
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
-	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
-	help
-	  Support for ST-Ericsson's Ux500 architecture
-
-if ARCH_U8500
-
-config UX500_SOC_COMMON
-	bool
-	default y
-	select ABX500_CORE
-	select AB8500_CORE
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
 	select ARM_GIC
 	select CACHE_L2X0
 	select CLKSRC_NOMADIK_MTU
 	select COMMON_CLK
+	select CPU_V7
+	select GENERIC_CLOCKEVENTS
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select HAVE_SMP
+	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
-	select PINCTRL_NOMADIK
 	select PINCTRL_ABX500
+	select PINCTRL_NOMADIK
 	select PL310_ERRATA_753970 if CACHE_PL310
+	help
+	  Support for ST-Ericsson's Ux500 architecture
+
+if ARCH_U8500
 
 config UX500_SOC_DB8500
 	bool
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index bf9b6be..616b96e 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -2,15 +2,11 @@
 # Makefile for the linux kernel, U8500 machine.
 #
 
-obj-y				:= cpu.o devices.o devices-common.o \
-				   id.o usb.o timer.o pm.o
-obj-$(CONFIG_CPU_IDLE)          += cpuidle.o
+obj-y				:= cpu.o devices.o id.o timer.o pm.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o
 obj-$(CONFIG_MACH_MOP500)	+= board-mop500.o board-mop500-sdi.o \
 				board-mop500-regulators.o \
-				board-mop500-uib.o board-mop500-stuib.o \
-				board-mop500-u8500uib.o \
 				board-mop500-pins.o \
 				board-mop500-audio.o
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c
index bfe443d..154e15f 100644
--- a/arch/arm/mach-ux500/board-mop500-audio.c
+++ b/arch/arm/mach-ux500/board-mop500-audio.c
@@ -17,7 +17,6 @@
 #include "ste-dma40-db8500.h"
 #include "board-mop500.h"
 #include "devices-db8500.h"
-#include "pins-db8500.h"
 
 static struct stedma40_chan_cfg msp0_dma_rx = {
 	.high_priority = true,
@@ -69,40 +68,6 @@ static struct stedma40_chan_cfg msp2_dma_tx = {
 	.phy_channel = 1,
 };
 
-static struct platform_device *db8500_add_msp_i2s(struct device *parent,
-			int id,
-			resource_size_t base, int irq,
-			struct msp_i2s_platform_data *pdata)
-{
-	struct platform_device *pdev;
-	struct resource res[] = {
-		DEFINE_RES_MEM(base, SZ_4K),
-		DEFINE_RES_IRQ(irq),
-	};
-
-	pr_info("Register platform-device 'ux500-msp-i2s', id %d, irq %d\n",
-		id, irq);
-	pdev = platform_device_register_resndata(parent, "ux500-msp-i2s", id,
-						res, ARRAY_SIZE(res),
-						pdata, sizeof(*pdata));
-	if (!pdev) {
-		pr_err("Failed to register platform-device 'ux500-msp-i2s.%d'!\n",
-			id);
-		return NULL;
-	}
-
-	return pdev;
-}
-
-/* Platform device for ASoC MOP500 machine */
-static struct platform_device snd_soc_mop500 = {
-	.name = "snd-soc-mop500",
-	.id = 0,
-	.dev = {
-		.platform_data = NULL,
-	},
-};
-
 struct msp_i2s_platform_data msp2_platform_data = {
 	.id = MSP_I2S_2,
 	.msp_i2s_dma_rx = &msp2_dma_rx,
@@ -114,19 +79,3 @@ struct msp_i2s_platform_data msp3_platform_data = {
 	.msp_i2s_dma_rx	= &msp1_dma_rx,
 	.msp_i2s_dma_tx	= NULL,
 };
-
-void mop500_audio_init(struct device *parent)
-{
-	pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__);
-	platform_device_register(&snd_soc_mop500);
-
-	pr_info("Initialize MSP I2S-devices.\n");
-	db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,
-			   &msp0_platform_data);
-	db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1,
-			   &msp1_platform_data);
-	db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2,
-			   &msp2_platform_data);
-	db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1,
-			   &msp3_platform_data);
-}
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index 7936d40..0efb156 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -14,7 +14,6 @@
 
 #include <asm/mach-types.h>
 
-#include "pins-db8500.h"
 #include "board-mop500.h"
 
 enum custom_pin_cfg_t {
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index b3e61a3..26600a1 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -65,18 +65,6 @@ struct mmci_platform_data mop500_sdi0_data = {
 #endif
 };
 
-static void sdi0_configure(struct device *parent)
-{
-	/* Add the device, force v2 to subrevision 1 */
-	db8500_add_sdi0(parent, &mop500_sdi0_data, U8500_SDI_V2_PERIPHID);
-}
-
-void mop500_sdi_tc35892_init(struct device *parent)
-{
-	mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD;
-	sdi0_configure(parent);
-}
-
 /*
  * SDI1 (SDIO WLAN)
  */
@@ -178,42 +166,3 @@ struct mmci_platform_data mop500_sdi4_data = {
 	.dma_tx_param	= &mop500_sdi4_dma_cfg_tx,
 #endif
 };
-
-void __init mop500_sdi_init(struct device *parent)
-{
-	/* PoP:ed eMMC */
-	db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
-	/* On-board eMMC */
-	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
-
-	/*
-	 * On boards with the TC35892 GPIO expander, sdi0 will finally
-	 * be added when the TC35892 initializes and calls
-	 * mop500_sdi_tc35892_init() above.
-	 */
-}
-
-void __init snowball_sdi_init(struct device *parent)
-{
-	/* On Snowball MMC_CAP_SD_HIGHSPEED isn't supported (Hardware issue?) */
-	mop500_sdi0_data.capabilities &= ~MMC_CAP_SD_HIGHSPEED;
-	/* On-board eMMC */
-	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
-	/* External Micro SD slot */
-	mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
-	mop500_sdi0_data.cd_invert = true;
-	sdi0_configure(parent);
-}
-
-void __init hrefv60_sdi_init(struct device *parent)
-{
-	/* PoP:ed eMMC */
-	db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
-	/* On-board eMMC */
-	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
-	/* External Micro SD slot */
-	mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
-	sdi0_configure(parent);
-	/* WLAN SDIO channel */
-	db8500_add_sdi1(parent, &mop500_sdi1_data, U8500_SDI_V2_PERIPHID);
-}
diff --git a/arch/arm/mach-ux500/board-mop500-stuib.c b/arch/arm/mach-ux500/board-mop500-stuib.c
deleted file mode 100644
index 7e1f294..0000000
--- a/arch/arm/mach-ux500/board-mop500-stuib.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL), version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mfd/stmpe.h>
-#include <linux/input/bu21013.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/input/matrix_keypad.h>
-#include <asm/mach-types.h>
-
-#include "board-mop500.h"
-
-/* STMPE/SKE keypad use this key layout */
-static const unsigned int mop500_keymap[] = {
-	KEY(2, 5, KEY_END),
-	KEY(4, 1, KEY_POWER),
-	KEY(3, 5, KEY_VOLUMEDOWN),
-	KEY(1, 3, KEY_3),
-	KEY(5, 2, KEY_RIGHT),
-	KEY(5, 0, KEY_9),
-
-	KEY(0, 5, KEY_MENU),
-	KEY(7, 6, KEY_ENTER),
-	KEY(4, 5, KEY_0),
-	KEY(6, 7, KEY_2),
-	KEY(3, 4, KEY_UP),
-	KEY(3, 3, KEY_DOWN),
-
-	KEY(6, 4, KEY_SEND),
-	KEY(6, 2, KEY_BACK),
-	KEY(4, 2, KEY_VOLUMEUP),
-	KEY(5, 5, KEY_1),
-	KEY(4, 3, KEY_LEFT),
-	KEY(3, 2, KEY_7),
-};
-
-static const struct matrix_keymap_data mop500_keymap_data = {
-	.keymap		= mop500_keymap,
-	.keymap_size    = ARRAY_SIZE(mop500_keymap),
-};
-/*
- * STMPE1601
- */
-static struct stmpe_keypad_platform_data stmpe1601_keypad_data = {
-	.debounce_ms    = 64,
-	.scan_count     = 8,
-	.no_autorepeat  = true,
-	.keymap_data    = &mop500_keymap_data,
-};
-
-static struct stmpe_platform_data stmpe1601_data = {
-	.id		= 1,
-	.blocks		= STMPE_BLOCK_KEYPAD,
-	.irq_trigger    = IRQF_TRIGGER_FALLING,
-	.irq_base       = MOP500_STMPE1601_IRQ(0),
-	.keypad		= &stmpe1601_keypad_data,
-	.autosleep      = true,
-	.autosleep_timeout = 1024,
-};
-
-static struct i2c_board_info __initdata mop500_i2c0_devices_stuib[] = {
-	{
-		I2C_BOARD_INFO("stmpe1601", 0x40),
-		.irq = NOMADIK_GPIO_TO_IRQ(218),
-		.platform_data = &stmpe1601_data,
-		.flags = I2C_CLIENT_WAKE,
-	},
-};
-
-/*
- * BU21013 ROHM touchscreen interface on the STUIBs
- */
-
-#define TOUCH_GPIO_PIN  84
-
-#define TOUCH_XMAX	384
-#define TOUCH_YMAX	704
-
-#define PRCMU_CLOCK_OCR		0x1CC
-#define TSC_EXT_CLOCK_9_6MHZ	0x840000
-
-static struct bu21013_platform_device tsc_plat_device = {
-	.touch_pin = TOUCH_GPIO_PIN,
-	.touch_x_max = TOUCH_XMAX,
-	.touch_y_max = TOUCH_YMAX,
-	.ext_clk = false,
-	.x_flip = false,
-	.y_flip = true,
-};
-
-static struct i2c_board_info __initdata u8500_i2c3_devices_stuib[] = {
-	{
-		I2C_BOARD_INFO("bu21013_tp", 0x5C),
-		.platform_data = &tsc_plat_device,
-	},
-	{
-		I2C_BOARD_INFO("bu21013_tp", 0x5D),
-		.platform_data = &tsc_plat_device,
-	},
-};
-
-void __init mop500_stuib_init(void)
-{
-	if (machine_is_hrefv60())
-		tsc_plat_device.cs_pin = HREFV60_TOUCH_RST_GPIO;
-	else
-		tsc_plat_device.cs_pin = GPIO_BU21013_CS;
-
-	mop500_uib_i2c_add(0, mop500_i2c0_devices_stuib,
-			ARRAY_SIZE(mop500_i2c0_devices_stuib));
-
-	mop500_uib_i2c_add(3, u8500_i2c3_devices_stuib,
-			ARRAY_SIZE(u8500_i2c3_devices_stuib));
-}
diff --git a/arch/arm/mach-ux500/board-mop500-u8500uib.c b/arch/arm/mach-ux500/board-mop500-u8500uib.c
deleted file mode 100644
index d397c19..0000000
--- a/arch/arm/mach-ux500/board-mop500-u8500uib.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Board data for the U8500 UIB, also known as the New UIB
- * License terms: GNU General Public License (GPL), version 2
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/interrupt.h>
-#include <linux/mfd/tc3589x.h>
-#include <linux/input/matrix_keypad.h>
-
-#include "irqs.h"
-
-#include "board-mop500.h"
-
-static struct i2c_board_info __initdata mop500_i2c3_devices_u8500[] = {
-	{
-		I2C_BOARD_INFO("synaptics_rmi4_i2c", 0x4B),
-		.irq = NOMADIK_GPIO_TO_IRQ(84),
-	},
-};
-
-/*
- * TC35893
- */
-static const unsigned int u8500_keymap[] = {
-	KEY(3, 1, KEY_END),
-	KEY(4, 1, KEY_POWER),
-	KEY(6, 4, KEY_VOLUMEDOWN),
-	KEY(4, 2, KEY_EMAIL),
-	KEY(3, 3, KEY_RIGHT),
-	KEY(2, 5, KEY_BACKSPACE),
-
-	KEY(6, 7, KEY_MENU),
-	KEY(5, 0, KEY_ENTER),
-	KEY(4, 3, KEY_0),
-	KEY(3, 4, KEY_DOT),
-	KEY(5, 2, KEY_UP),
-	KEY(3, 5, KEY_DOWN),
-
-	KEY(4, 5, KEY_SEND),
-	KEY(0, 5, KEY_BACK),
-	KEY(6, 2, KEY_VOLUMEUP),
-	KEY(1, 3, KEY_SPACE),
-	KEY(7, 6, KEY_LEFT),
-	KEY(5, 5, KEY_SEARCH),
-};
-
-static struct matrix_keymap_data u8500_keymap_data = {
-	.keymap		= u8500_keymap,
-	.keymap_size    = ARRAY_SIZE(u8500_keymap),
-};
-
-static struct tc3589x_keypad_platform_data tc35893_data = {
-	.krow = TC_KPD_ROWS,
-	.kcol = TC_KPD_COLUMNS,
-	.debounce_period = TC_KPD_DEBOUNCE_PERIOD,
-	.settle_time = TC_KPD_SETTLE_TIME,
-	.irqtype = IRQF_TRIGGER_FALLING,
-	.enable_wakeup = true,
-	.keymap_data    = &u8500_keymap_data,
-	.no_autorepeat  = true,
-};
-
-static struct tc3589x_platform_data tc3589x_keypad_data = {
-	.block = TC3589x_BLOCK_KEYPAD,
-	.keypad = &tc35893_data,
-	.irq_base = MOP500_EGPIO_IRQ_BASE,
-};
-
-static struct i2c_board_info __initdata mop500_i2c0_devices_u8500[] = {
-	{
-		I2C_BOARD_INFO("tc3589x", 0x44),
-		.platform_data = &tc3589x_keypad_data,
-		.irq = NOMADIK_GPIO_TO_IRQ(218),
-		.flags = I2C_CLIENT_WAKE,
-	},
-};
-
-
-void __init mop500_u8500uib_init(void)
-{
-	mop500_uib_i2c_add(3, mop500_i2c3_devices_u8500,
-			ARRAY_SIZE(mop500_i2c3_devices_u8500));
-
-	mop500_uib_i2c_add(0, mop500_i2c0_devices_u8500,
-			ARRAY_SIZE(mop500_i2c0_devices_u8500));
-
-}
diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c
deleted file mode 100644
index bdaa422..0000000
--- a/arch/arm/mach-ux500/board-mop500-uib.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL), version 2
- */
-
-#define pr_fmt(fmt)	"mop500-uib: " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-
-#include "board-mop500.h"
-#include "id.h"
-
-enum mop500_uib {
-	STUIB,
-	U8500UIB,
-};
-
-struct uib {
-	const char *name;
-	const char *option;
-	void (*init)(void);
-};
-
-static struct uib __initdata mop500_uibs[] = {
-	[STUIB] = {
-		.name	= "ST-UIB",
-		.option	= "stuib",
-		.init	= mop500_stuib_init,
-	},
-	[U8500UIB] = {
-		.name	= "U8500-UIB",
-		.option	= "u8500uib",
-		.init	= mop500_u8500uib_init,
-	},
-};
-
-static struct uib *mop500_uib;
-
-static int __init mop500_uib_setup(char *str)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(mop500_uibs); i++) {
-		struct uib *uib = &mop500_uibs[i];
-
-		if (!strcmp(str, uib->option)) {
-			mop500_uib = uib;
-			break;
-		}
-	}
-
-	if (i == ARRAY_SIZE(mop500_uibs))
-		pr_err("invalid uib= option (%s)\n", str);
-
-	return 1;
-}
-__setup("uib=", mop500_uib_setup);
-
-/*
- * The UIBs are detected after the I2C host controllers are registered, so
- * i2c_register_board_info() can't be used.
- */
-void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
-		unsigned n)
-{
-	struct i2c_adapter *adap;
-	struct i2c_client *client;
-	int i;
-
-	adap = i2c_get_adapter(busnum);
-	if (!adap) {
-		pr_err("failed to get adapter i2c%d\n", busnum);
-		return;
-	}
-
-	for (i = 0; i < n; i++) {
-		client = i2c_new_device(adap, &info[i]);
-		if (!client)
-			pr_err("failed to register %s to i2c%d\n",
-					info[i].type, busnum);
-	}
-
-	i2c_put_adapter(adap);
-}
-
-static void __init __mop500_uib_init(struct uib *uib, const char *why)
-{
-	pr_info("%s (%s)\n", uib->name, why);
-	uib->init();
-}
-
-/*
- * Detect the UIB attached based on the presence or absence of i2c devices.
- */
-int __init mop500_uib_init(void)
-{
-	struct uib *uib = mop500_uib;
-	struct i2c_adapter *i2c0;
-	int ret;
-
-	if (!cpu_is_u8500_family())
-		return -ENODEV;
-
-	if (uib) {
-		__mop500_uib_init(uib, "from uib= boot argument");
-		return 0;
-	}
-
-	i2c0 = i2c_get_adapter(0);
-	if (!i2c0) {
-		__mop500_uib_init(&mop500_uibs[STUIB],
-				"fallback, could not get i2c0");
-		return -ENODEV;
-	}
-
-	/* U8500-UIB has the TC35893 at 0x44 on I2C0, the ST-UIB doesn't. */
-	ret = i2c_smbus_xfer(i2c0, 0x44, 0, I2C_SMBUS_WRITE, 0,
-			I2C_SMBUS_QUICK, NULL);
-	i2c_put_adapter(i2c0);
-
-	if (ret == 0)
-		uib = &mop500_uibs[U8500UIB];
-	else
-		uib = &mop500_uibs[STUIB];
-
-	__mop500_uib_init(uib, "detected");
-
-	return 0;
-}
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index df5d27a..514d40b 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -14,27 +14,16 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-nomadik.h>
 #include <linux/platform_data/db8500_thermal.h>
-#include <linux/gpio.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl022.h>
-#include <linux/amba/serial.h>
-#include <linux/spi/spi.h>
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/regulator/ab8500.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/driver.h>
-#include <linux/regulator/gpio-regulator.h>
-#include <linux/mfd/tc3589x.h>
 #include <linux/mfd/tps6105x.h>
-#include <linux/mfd/abx500/ab8500-gpio.h>
-#include <linux/mfd/abx500/ab8500-codec.h>
 #include <linux/platform_data/leds-lp55xx.h>
 #include <linux/input.h>
-#include <linux/smsc911x.h>
-#include <linux/gpio_keys.h>
 #include <linux/delay.h>
 #include <linux/leds.h>
 #include <linux/pinctrl/consumer.h>
@@ -42,12 +31,10 @@
 #include <linux/platform_data/dma-ste-dma40.h>
 
 #include <asm/mach-types.h>
-#include <asm/mach/arch.h>
 
 #include "setup.h"
 #include "devices.h"
 #include "irqs.h"
-#include <linux/platform_data/crypto-ux500.h>
 
 #include "ste-dma40-db8500.h"
 #include "db8500-regs.h"
@@ -55,392 +42,9 @@
 #include "board-mop500.h"
 #include "board-mop500-regulators.h"
 
-static struct gpio_led snowball_led_array[] = {
-	{
-		.name = "user_led",
-		.default_trigger = "heartbeat",
-		.gpio = 142,
-	},
-};
-
-static struct gpio_led_platform_data snowball_led_data = {
-	.leds = snowball_led_array,
-	.num_leds = ARRAY_SIZE(snowball_led_array),
-};
-
-static struct platform_device snowball_led_dev = {
-	.name = "leds-gpio",
-	.dev = {
-		.platform_data = &snowball_led_data,
-	},
-};
-
-static struct fixed_voltage_config snowball_gpio_en_3v3_data = {
-       .supply_name            = "EN-3V3",
-       .gpio                   = SNOWBALL_EN_3V3_ETH_GPIO,
-       .microvolts             = 3300000,
-       .enable_high            = 1,
-       .init_data              = &gpio_en_3v3_regulator,
-       .startup_delay          = 5000, /* 1200us */
-};
-
-static struct platform_device snowball_gpio_en_3v3_regulator_dev = {
-       .name   = "reg-fixed-voltage",
-       .id     = 1,
-       .dev    = {
-               .platform_data  = &snowball_gpio_en_3v3_data,
-       },
-};
-
-/* Dynamically populated. */
-static struct gpio sdi0_reg_gpios[] = {
-	{ 0, GPIOF_OUT_INIT_LOW, "mmci_vsel" },
-};
-
-static struct gpio_regulator_state sdi0_reg_states[] = {
-	{ .value = 2900000, .gpios = (0 << 0) },
-	{ .value = 1800000, .gpios = (1 << 0) },
-};
-
-static struct gpio_regulator_config sdi0_reg_info = {
-	.supply_name		= "ext-mmc-level-shifter",
-	.gpios			= sdi0_reg_gpios,
-	.nr_gpios		= ARRAY_SIZE(sdi0_reg_gpios),
-	.states			= sdi0_reg_states,
-	.nr_states		= ARRAY_SIZE(sdi0_reg_states),
-	.type			= REGULATOR_VOLTAGE,
-	.enable_high		= 1,
-	.enabled_at_boot	= 0,
-	.init_data		= &sdi0_reg_init_data,
-	.startup_delay		= 100,
-};
-
-static struct platform_device sdi0_regulator = {
-	.name = "gpio-regulator",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &sdi0_reg_info,
-	},
-};
-
-static struct abx500_gpio_platform_data ab8500_gpio_pdata = {
-	.gpio_base		= MOP500_AB8500_PIN_GPIO(1),
-};
-
-/* ab8500-codec */
-static struct ab8500_codec_platform_data ab8500_codec_pdata = {
-	.amics =  {
-		.mic1_type = AMIC_TYPE_DIFFERENTIAL,
-		.mic2_type = AMIC_TYPE_DIFFERENTIAL,
-		.mic1a_micbias = AMIC_MICBIAS_VAMIC1,
-		.mic1b_micbias = AMIC_MICBIAS_VAMIC1,
-		.mic2_micbias = AMIC_MICBIAS_VAMIC2
-	},
-	.ear_cmv = EAR_CMV_0_95V
-};
-
-static struct gpio_keys_button snowball_key_array[] = {
-	{
-		.gpio           = 32,
-		.type           = EV_KEY,
-		.code           = KEY_1,
-		.desc           = "userpb",
-		.active_low     = 1,
-		.debounce_interval = 50,
-		.wakeup         = 1,
-	},
-	{
-		.gpio           = 151,
-		.type           = EV_KEY,
-		.code           = KEY_2,
-		.desc           = "extkb1",
-		.active_low     = 1,
-		.debounce_interval = 50,
-		.wakeup         = 1,
-	},
-	{
-		.gpio           = 152,
-		.type           = EV_KEY,
-		.code           = KEY_3,
-		.desc           = "extkb2",
-		.active_low     = 1,
-		.debounce_interval = 50,
-		.wakeup         = 1,
-	},
-	{
-		.gpio           = 161,
-		.type           = EV_KEY,
-		.code           = KEY_4,
-		.desc           = "extkb3",
-		.active_low     = 1,
-		.debounce_interval = 50,
-		.wakeup         = 1,
-	},
-	{
-		.gpio           = 162,
-		.type           = EV_KEY,
-		.code           = KEY_5,
-		.desc           = "extkb4",
-		.active_low     = 1,
-		.debounce_interval = 50,
-		.wakeup         = 1,
-	},
-};
-
-static struct gpio_keys_platform_data snowball_key_data = {
-	.buttons        = snowball_key_array,
-	.nbuttons       = ARRAY_SIZE(snowball_key_array),
-};
-
-static struct platform_device snowball_key_dev = {
-	.name           = "gpio-keys",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &snowball_key_data,
-	}
-};
-
-static struct smsc911x_platform_config snowball_sbnet_cfg = {
-	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
-	.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
-	.shift = 1,
-};
-
-static struct resource sbnet_res[] = {
-	{
-		.name = "smsc911x-memory",
-		.start = (0x5000 << 16),
-		.end  =  (0x5000 << 16) + 0xffff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = NOMADIK_GPIO_TO_IRQ(140),
-		.end = NOMADIK_GPIO_TO_IRQ(140),
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct platform_device snowball_sbnet_dev = {
-	.name           = "smsc911x",
-	.num_resources  = ARRAY_SIZE(sbnet_res),
-	.resource       = sbnet_res,
-	.dev            = {
-		.platform_data = &snowball_sbnet_cfg,
-	},
-};
-
 struct ab8500_platform_data ab8500_platdata = {
 	.irq_base	= MOP500_AB8500_IRQ_BASE,
 	.regulator	= &ab8500_regulator_plat_data,
-	.gpio		= &ab8500_gpio_pdata,
-	.codec		= &ab8500_codec_pdata,
-};
-
-static struct platform_device u8500_cpufreq_cooling_device = {
-	.name           = "db8500-cpufreq-cooling",
-};
-
-/*
- * TPS61052
- */
-
-static struct tps6105x_platform_data mop500_tps61052_data = {
-	.mode = TPS6105X_MODE_VOLTAGE,
-	.regulator_data = &tps61052_regulator,
-};
-
-/*
- * TC35892
- */
-
-static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base)
-{
-	struct device *parent = NULL;
-#if 0
-	/* FIXME: Is the sdi actually part of tc3589x? */
-	parent = tc3589x->dev;
-#endif
-	mop500_sdi_tc35892_init(parent);
-}
-
-static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = {
-	.gpio_base	= MOP500_EGPIO(0),
-	.setup		= mop500_tc35892_init,
-};
-
-static struct tc3589x_platform_data mop500_tc35892_data = {
-	.block		= TC3589x_BLOCK_GPIO,
-	.gpio		= &mop500_tc35892_gpio_data,
-	.irq_base	= MOP500_EGPIO_IRQ_BASE,
-};
-
-static struct lp55xx_led_config lp5521_pri_led[] = {
-       [0] = {
-	       .chan_nr = 0,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-       [1] = {
-	       .chan_nr = 1,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-       [2] = {
-	       .chan_nr = 2,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-};
-
-static struct lp55xx_platform_data __initdata lp5521_pri_data = {
-       .label = "lp5521_pri",
-       .led_config     = &lp5521_pri_led[0],
-       .num_channels   = 3,
-       .clock_mode     = LP55XX_CLOCK_EXT,
-};
-
-static struct lp55xx_led_config lp5521_sec_led[] = {
-       [0] = {
-	       .chan_nr = 0,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-       [1] = {
-	       .chan_nr = 1,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-       [2] = {
-	       .chan_nr = 2,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-};
-
-static struct lp55xx_platform_data __initdata lp5521_sec_data = {
-       .label = "lp5521_sec",
-       .led_config     = &lp5521_sec_led[0],
-       .num_channels   = 3,
-       .clock_mode     = LP55XX_CLOCK_EXT,
-};
-
-static struct i2c_board_info __initdata mop500_i2c0_devices[] = {
-	{
-		I2C_BOARD_INFO("tc3589x", 0x42),
-		.irq		= NOMADIK_GPIO_TO_IRQ(217),
-		.platform_data  = &mop500_tc35892_data,
-	},
-	/* I2C0 devices only available prior to HREFv60 */
-	{
-		I2C_BOARD_INFO("tps61052", 0x33),
-		.platform_data  = &mop500_tps61052_data,
-	},
-};
-
-#define NUM_PRE_V60_I2C0_DEVICES 1
-
-static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
-	{
-		/* lp5521 LED driver, 1st device */
-		I2C_BOARD_INFO("lp5521", 0x33),
-		.platform_data = &lp5521_pri_data,
-	},
-	{
-		/* lp5521 LED driver, 2st device */
-		I2C_BOARD_INFO("lp5521", 0x34),
-		.platform_data = &lp5521_sec_data,
-	},
-	{
-		/* Light sensor Rohm BH1780GLI */
-		I2C_BOARD_INFO("bh1780", 0x29),
-	},
-};
-
-static void __init mop500_i2c_init(struct device *parent)
-{
-	db8500_add_i2c0(parent, NULL);
-	db8500_add_i2c1(parent, NULL);
-	db8500_add_i2c2(parent, NULL);
-	db8500_add_i2c3(parent, NULL);
-}
-
-static struct gpio_keys_button mop500_gpio_keys[] = {
-	{
-		.desc			= "SFH7741 Proximity Sensor",
-		.type			= EV_SW,
-		.code			= SW_FRONT_PROXIMITY,
-		.active_low		= 0,
-		.can_disable		= 1,
-	}
-};
-
-static struct regulator *prox_regulator;
-static int mop500_prox_activate(struct device *dev);
-static void mop500_prox_deactivate(struct device *dev);
-
-static struct gpio_keys_platform_data mop500_gpio_keys_data = {
-	.buttons	= mop500_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(mop500_gpio_keys),
-	.enable		= mop500_prox_activate,
-	.disable	= mop500_prox_deactivate,
-};
-
-static struct platform_device mop500_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= 0,
-	.dev	= {
-		.platform_data	= &mop500_gpio_keys_data,
-	},
-};
-
-static int mop500_prox_activate(struct device *dev)
-{
-	prox_regulator = regulator_get(&mop500_gpio_keys_device.dev,
-						"vcc");
-	if (IS_ERR(prox_regulator)) {
-		dev_err(&mop500_gpio_keys_device.dev,
-			"no regulator\n");
-		return PTR_ERR(prox_regulator);
-	}
-
-	return regulator_enable(prox_regulator);
-}
-
-static void mop500_prox_deactivate(struct device *dev)
-{
-	regulator_disable(prox_regulator);
-	regulator_put(prox_regulator);
-}
-
-static struct cryp_platform_data u8500_cryp1_platform_data = {
-		.mem_to_engine = {
-				.dir = DMA_MEM_TO_DEV,
-				.dev_type = DB8500_DMA_DEV48_CAC1,
-				.mode = STEDMA40_MODE_LOGICAL,
-		},
-		.engine_to_mem = {
-				.dir = DMA_DEV_TO_MEM,
-				.dev_type = DB8500_DMA_DEV48_CAC1,
-				.mode = STEDMA40_MODE_LOGICAL,
-		}
-};
-
-static struct stedma40_chan_cfg u8500_hash_dma_cfg_tx = {
-		.dir = DMA_MEM_TO_DEV,
-		.dev_type = DB8500_DMA_DEV50_HAC1_TX,
-		.mode = STEDMA40_MODE_LOGICAL,
-};
-
-static struct hash_platform_data u8500_hash1_platform_data = {
-		.mem_to_engine = &u8500_hash_dma_cfg_tx,
-		.dma_filter = stedma40_filter,
-};
-
-/* add any platform devices here - TODO */
-static struct platform_device *mop500_platform_devs[] __initdata = {
-	&mop500_gpio_keys_device,
-	&sdi0_regulator,
 };
 
 #ifdef CONFIG_STE_DMA40
@@ -472,248 +76,3 @@ struct pl022_ssp_controller ssp0_plat = {
 	 */
 	.num_chipselect = 5,
 };
-
-static void __init mop500_spi_init(struct device *parent)
-{
-	db8500_add_ssp0(parent, &ssp0_plat);
-}
-
-#ifdef CONFIG_STE_DMA40
-static struct stedma40_chan_cfg uart0_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type = DB8500_DMA_DEV13_UART0,
-};
-
-static struct stedma40_chan_cfg uart0_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV13_UART0,
-};
-
-static struct stedma40_chan_cfg uart1_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type = DB8500_DMA_DEV12_UART1,
-};
-
-static struct stedma40_chan_cfg uart1_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV12_UART1,
-};
-
-static struct stedma40_chan_cfg uart2_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type = DB8500_DMA_DEV11_UART2,
-};
-
-static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV11_UART2,
-};
-#endif
-
-struct amba_pl011_data uart0_plat = {
-#ifdef CONFIG_STE_DMA40
-	.dma_filter = stedma40_filter,
-	.dma_rx_param = &uart0_dma_cfg_rx,
-	.dma_tx_param = &uart0_dma_cfg_tx,
-#endif
-};
-
-struct amba_pl011_data uart1_plat = {
-#ifdef CONFIG_STE_DMA40
-	.dma_filter = stedma40_filter,
-	.dma_rx_param = &uart1_dma_cfg_rx,
-	.dma_tx_param = &uart1_dma_cfg_tx,
-#endif
-};
-
-struct amba_pl011_data uart2_plat = {
-#ifdef CONFIG_STE_DMA40
-	.dma_filter = stedma40_filter,
-	.dma_rx_param = &uart2_dma_cfg_rx,
-	.dma_tx_param = &uart2_dma_cfg_tx,
-#endif
-};
-
-static void __init mop500_uart_init(struct device *parent)
-{
-	db8500_add_uart0(parent, &uart0_plat);
-	db8500_add_uart1(parent, &uart1_plat);
-	db8500_add_uart2(parent, &uart2_plat);
-}
-
-static void __init u8500_cryp1_hash1_init(struct device *parent)
-{
-	db8500_add_cryp1(parent, &u8500_cryp1_platform_data);
-	db8500_add_hash1(parent, &u8500_hash1_platform_data);
-}
-
-static struct platform_device *snowball_platform_devs[] __initdata = {
-	&snowball_led_dev,
-	&snowball_key_dev,
-	&snowball_sbnet_dev,
-	&snowball_gpio_en_3v3_regulator_dev,
-	&u8500_cpufreq_cooling_device,
-	&sdi0_regulator,
-};
-
-static void __init mop500_init_machine(void)
-{
-	struct device *parent = NULL;
-	int i2c0_devs;
-	int i;
-
-	platform_device_register(&db8500_prcmu_device);
-	mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
-
-	sdi0_reg_info.enable_gpio = GPIO_SDMMC_EN;
-	sdi0_reg_info.gpios[0].gpio = GPIO_SDMMC_1V8_3V_SEL;
-
-	mop500_pinmaps_init();
-	parent = u8500_init_devices();
-
-	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
-		mop500_platform_devs[i]->dev.parent = parent;
-
-	platform_add_devices(mop500_platform_devs,
-			ARRAY_SIZE(mop500_platform_devs));
-
-	mop500_i2c_init(parent);
-	mop500_sdi_init(parent);
-	mop500_spi_init(parent);
-	mop500_audio_init(parent);
-	mop500_uart_init(parent);
-
-	u8500_cryp1_hash1_init(parent);
-
-	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
-
-	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
-	i2c_register_board_info(2, mop500_i2c2_devices,
-				ARRAY_SIZE(mop500_i2c2_devices));
-
-	/* This board has full regulator constraints */
-	regulator_has_full_constraints();
-}
-
-static void __init snowball_init_machine(void)
-{
-	struct device *parent = NULL;
-	int i;
-
-	platform_device_register(&db8500_prcmu_device);
-
-	sdi0_reg_info.enable_gpio = SNOWBALL_SDMMC_EN_GPIO;
-	sdi0_reg_info.gpios[0].gpio = SNOWBALL_SDMMC_1V8_3V_GPIO;
-
-	snowball_pinmaps_init();
-	parent = u8500_init_devices();
-
-	for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
-		snowball_platform_devs[i]->dev.parent = parent;
-
-	platform_add_devices(snowball_platform_devs,
-			ARRAY_SIZE(snowball_platform_devs));
-
-	mop500_i2c_init(parent);
-	snowball_sdi_init(parent);
-	mop500_spi_init(parent);
-	mop500_audio_init(parent);
-	mop500_uart_init(parent);
-
-	u8500_cryp1_hash1_init(parent);
-
-	/* This board has full regulator constraints */
-	regulator_has_full_constraints();
-}
-
-static void __init hrefv60_init_machine(void)
-{
-	struct device *parent = NULL;
-	int i2c0_devs;
-	int i;
-
-	platform_device_register(&db8500_prcmu_device);
-	/*
-	 * The HREFv60 board removed a GPIO expander and routed
-	 * all these GPIO pins to the internal GPIO controller
-	 * instead.
-	 */
-	mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
-
-	sdi0_reg_info.enable_gpio = HREFV60_SDMMC_EN_GPIO;
-	sdi0_reg_info.gpios[0].gpio = HREFV60_SDMMC_1V8_3V_GPIO;
-
-	hrefv60_pinmaps_init();
-	parent = u8500_init_devices();
-
-	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
-		mop500_platform_devs[i]->dev.parent = parent;
-
-	platform_add_devices(mop500_platform_devs,
-			ARRAY_SIZE(mop500_platform_devs));
-
-	mop500_i2c_init(parent);
-	hrefv60_sdi_init(parent);
-	mop500_spi_init(parent);
-	mop500_audio_init(parent);
-	mop500_uart_init(parent);
-
-	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
-
-	i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
-
-	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
-	i2c_register_board_info(2, mop500_i2c2_devices,
-				ARRAY_SIZE(mop500_i2c2_devices));
-
-	/* This board has full regulator constraints */
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
-	/* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(ux500_smp_ops),
-	.map_io		= u8500_map_io,
-	.init_irq	= ux500_init_irq,
-	/* we re-use nomadik timer here */
-	.init_time	= ux500_timer_init,
-	.init_machine	= mop500_init_machine,
-	.init_late	= ux500_init_late,
-MACHINE_END
-
-MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520")
-	.atag_offset	= 0x100,
-	.map_io		= u8500_map_io,
-	.init_irq	= ux500_init_irq,
-	.init_time	= ux500_timer_init,
-	.init_machine	= mop500_init_machine,
-	.init_late	= ux500_init_late,
-MACHINE_END
-
-MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(ux500_smp_ops),
-	.map_io		= u8500_map_io,
-	.init_irq	= ux500_init_irq,
-	.init_time	= ux500_timer_init,
-	.init_machine	= hrefv60_init_machine,
-	.init_late	= ux500_init_late,
-MACHINE_END
-
-MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(ux500_smp_ops),
-	.map_io		= u8500_map_io,
-	.init_irq	= ux500_init_irq,
-	/* we re-use nomadik timer here */
-	.init_time	= ux500_timer_init,
-	.init_machine	= snowball_init_machine,
-	.init_late	= NULL,
-MACHINE_END
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index d6fab16..511d6fe 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -79,7 +79,6 @@
 #define SNOWBALL_EN_3V3_ETH_GPIO	MOP500_AB8500_PIN_GPIO(26)	/* GPIO26 */
 
 struct device;
-struct i2c_board_info;
 extern struct mmci_platform_data mop500_sdi0_data;
 extern struct mmci_platform_data mop500_sdi1_data;
 extern struct mmci_platform_data mop500_sdi2_data;
@@ -88,25 +87,10 @@ extern struct msp_i2s_platform_data msp0_platform_data;
 extern struct msp_i2s_platform_data msp1_platform_data;
 extern struct msp_i2s_platform_data msp2_platform_data;
 extern struct msp_i2s_platform_data msp3_platform_data;
-extern struct arm_pmu_platdata db8500_pmu_platdata;
-extern struct amba_pl011_data uart0_plat;
-extern struct amba_pl011_data uart1_plat;
-extern struct amba_pl011_data uart2_plat;
 extern struct pl022_ssp_controller ssp0_plat;
-extern struct stedma40_platform_data dma40_plat_data;
 
-extern void mop500_sdi_init(struct device *parent);
-extern void snowball_sdi_init(struct device *parent);
-extern void hrefv60_sdi_init(struct device *parent);
-extern void mop500_sdi_tc35892_init(struct device *parent);
-void __init mop500_u8500uib_init(void);
-void __init mop500_stuib_init(void);
 void __init mop500_pinmaps_init(void);
 void __init snowball_pinmaps_init(void);
 void __init hrefv60_pinmaps_init(void);
-void mop500_audio_init(struct device *parent);
 
-int __init mop500_uib_init(void);
-void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
-		unsigned n);
 #endif
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
index 82ccf1d..264f894 100644
--- a/arch/arm/mach-ux500/cache-l2x0.c
+++ b/arch/arm/mach-ux500/cache-l2x0.c
@@ -69,6 +69,7 @@ static int __init ux500_l2x0_init(void)
 	 * some SMI service available.
 	 */
 	outer_cache.disable = NULL;
+	outer_cache.set_debug = NULL;
 
 	return 0;
 }
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 12eee81..2e85c1e 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -26,14 +26,12 @@
 
 #include <asm/pmu.h>
 #include <asm/mach/map.h>
-#include <asm/mach/arch.h>
 
 #include "setup.h"
 #include "devices.h"
 #include "irqs.h"
 
 #include "devices-db8500.h"
-#include "ste-dma40-db8500.h"
 #include "db8500-regs.h"
 #include "board-mop500.h"
 #include "id.h"
@@ -94,14 +92,6 @@ void __init u8500_map_io(void)
 		iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
 }
 
-static struct resource db8500_pmu_resources[] = {
-	[0] = {
-		.start		= IRQ_DB8500_PMU,
-		.end		= IRQ_DB8500_PMU,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
 /*
  * The PMU IRQ lines of two cores are wired together into a single interrupt.
  * Bounce the interrupt to the other core if it's not ours.
@@ -126,53 +116,6 @@ struct arm_pmu_platdata db8500_pmu_platdata = {
 	.handle_irq		= db8500_pmu_handler,
 };
 
-static struct platform_device db8500_pmu_device = {
-	.name			= "arm-pmu",
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(db8500_pmu_resources),
-	.resource		= db8500_pmu_resources,
-	.dev.platform_data	= &db8500_pmu_platdata,
-};
-
-static struct platform_device *platform_devs[] __initdata = {
-	&u8500_dma40_device,
-	&db8500_pmu_device,
-};
-
-static resource_size_t __initdata db8500_gpio_base[] = {
-	U8500_GPIOBANK0_BASE,
-	U8500_GPIOBANK1_BASE,
-	U8500_GPIOBANK2_BASE,
-	U8500_GPIOBANK3_BASE,
-	U8500_GPIOBANK4_BASE,
-	U8500_GPIOBANK5_BASE,
-	U8500_GPIOBANK6_BASE,
-	U8500_GPIOBANK7_BASE,
-	U8500_GPIOBANK8_BASE,
-};
-
-static void __init db8500_add_gpios(struct device *parent)
-{
-	struct nmk_gpio_platform_data pdata = {
-		.supports_sleepmode = true,
-	};
-
-	dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base),
-			 IRQ_DB8500_GPIO0, &pdata);
-	dbx500_add_pinctrl(parent, "pinctrl-db8500", U8500_PRCMU_BASE);
-}
-
-static int usb_db8500_dma_cfg[] = {
-	DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9,
-	DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10,
-	DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11,
-	DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12,
-	DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13,
-	DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14,
-	DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15,
-	DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8
-};
-
 static const char *db8500_read_soc_id(void)
 {
 	void __iomem *uid = __io_address(U8500_BB_UID_BASE);
@@ -192,60 +135,22 @@ static struct device * __init db8500_soc_device_init(void)
 	return ux500_soc_device_init(soc_id);
 }
 
-/*
- * This function is called from the board init
- */
-struct device * __init u8500_init_devices(void)
-{
-	struct device *parent;
-	int i;
-
-	parent = db8500_soc_device_init();
-
-	db8500_add_rtc(parent);
-	db8500_add_gpios(parent);
-	db8500_add_usb(parent, usb_db8500_dma_cfg, usb_db8500_dma_cfg);
-
-	for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
-		platform_devs[i]->dev.parent = parent;
-
-	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
-
-	return parent;
-}
-
 #ifdef CONFIG_MACH_UX500_DT
 static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	/* Requires call-back bindings. */
 	OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
 	/* Requires DMA bindings. */
-	OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", NULL),
-	OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", NULL),
-	OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", NULL),
-	OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0",  &ssp0_plat),
-	OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0",  &mop500_sdi0_data),
-	OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1",  &mop500_sdi1_data),
-	OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2",  &mop500_sdi2_data),
-	OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4",  &mop500_sdi4_data),
-	/* Requires clock name bindings. */
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e000, "gpio.2", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e080, "gpio.3", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e100, "gpio.4", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e180, "gpio.5", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
-	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL),
-	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL),
-	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL),
-	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
-	OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
-	OF_DEV_AUXDATA("stericsson,db8500-musb", 0xa03e0000, "musb-ux500.0", NULL),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
+		       "ux500-msp-i2s.0", &msp0_platform_data),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
+		       "ux500-msp-i2s.1", &msp1_platform_data),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
+		       "ux500-msp-i2s.2", &msp2_platform_data),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
+		       "ux500-msp-i2s.3", &msp3_platform_data),
+	/* Requires non-DT:able platform data. */
 	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
 			&db8500_prcmu_pdata),
-	OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x.0", NULL),
 	OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL),
 	OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL),
 	OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0",
@@ -253,17 +158,6 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	/* Requires device name bindings. */
 	OF_DEV_AUXDATA("stericsson,db8500-pinctrl", U8500_PRCMU_BASE,
 		"pinctrl-db8500", NULL),
-	/* Requires clock name and DMA bindings. */
-	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
-		"ux500-msp-i2s.0", &msp0_platform_data),
-	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
-		"ux500-msp-i2s.1", &msp1_platform_data),
-	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
-		"ux500-msp-i2s.2", &msp2_platform_data),
-	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
-		"ux500-msp-i2s.3", &msp3_platform_data),
-	/* Requires clock name bindings and channel address lookup table. */
-	OF_DEV_AUXDATA("stericsson,db8500-dma40", 0x801C0000, "dma40.0", NULL),
 	{},
 };
 
@@ -325,6 +219,7 @@ DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
 	.init_machine	= u8500_init_machine,
 	.init_late	= NULL,
 	.dt_compat      = stericsson_dt_platform_compat,
+	.restart        = ux500_restart,
 MACHINE_END
 
 #endif
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index e6fb023..f84d439 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -31,6 +31,14 @@
 #include "db8500-regs.h"
 #include "id.h"
 
+void ux500_restart(enum reboot_mode mode, const char *cmd)
+{
+	local_irq_disable();
+	local_fiq_disable();
+
+	prcmu_system_reset(0);
+}
+
 /*
  * FIXME: Should we set up the GPIO domain here?
  *
@@ -70,9 +78,17 @@ void __init ux500_init_irq(void)
 	if (cpu_is_u8500_family()) {
 		prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1);
 		ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1);
-		u8500_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
-			       U8500_CLKRST3_BASE, U8500_CLKRST5_BASE,
-			       U8500_CLKRST6_BASE);
+
+		if (of_have_populated_dt())
+			u8500_of_clk_init(U8500_CLKRST1_BASE,
+					  U8500_CLKRST2_BASE,
+					  U8500_CLKRST3_BASE,
+					  U8500_CLKRST5_BASE,
+					  U8500_CLKRST6_BASE);
+		else
+			u8500_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
+				       U8500_CLKRST3_BASE, U8500_CLKRST5_BASE,
+				       U8500_CLKRST6_BASE);
 	} else if (cpu_is_u9540()) {
 		prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1);
 		ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1);
@@ -88,11 +104,6 @@ void __init ux500_init_irq(void)
 	}
 }
 
-void __init ux500_init_late(void)
-{
-	mop500_uib_init();
-}
-
 static const char * __init ux500_get_machine(void)
 {
 	return kasprintf(GFP_KERNEL, "DB%4x", dbx500_partnumber());
diff --git a/arch/arm/mach-ux500/cpuidle.c b/arch/arm/mach-ux500/cpuidle.c
deleted file mode 100644
index a45dd09..0000000
--- a/arch/arm/mach-ux500/cpuidle.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Copyright (c) 2012 Linaro : Daniel Lezcano <daniel.lezcano@linaro.org> (IBM)
- *
- * Based on the work of Rickard Andersson <rickard.andersson@stericsson.com>
- * and Jonas Aaberg <jonas.aberg@stericsson.com>.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/cpuidle.h>
-#include <linux/spinlock.h>
-#include <linux/atomic.h>
-#include <linux/smp.h>
-#include <linux/mfd/dbx500-prcmu.h>
-#include <linux/platform_data/arm-ux500-pm.h>
-
-#include <asm/cpuidle.h>
-#include <asm/proc-fns.h>
-
-#include "db8500-regs.h"
-#include "id.h"
-
-static atomic_t master = ATOMIC_INIT(0);
-static DEFINE_SPINLOCK(master_lock);
-
-static inline int ux500_enter_idle(struct cpuidle_device *dev,
-				   struct cpuidle_driver *drv, int index)
-{
-	int this_cpu = smp_processor_id();
-	bool recouple = false;
-
-	if (atomic_inc_return(&master) == num_online_cpus()) {
-
-		/* With this lock, we prevent the other cpu to exit and enter
-		 * this function again and become the master */
-		if (!spin_trylock(&master_lock))
-			goto wfi;
-
-		/* decouple the gic from the A9 cores */
-		if (prcmu_gic_decouple()) {
-			spin_unlock(&master_lock);
-			goto out;
-		}
-
-		/* If an error occur, we will have to recouple the gic
-		 * manually */
-		recouple = true;
-
-		/* At this state, as the gic is decoupled, if the other
-		 * cpu is in WFI, we have the guarantee it won't be wake
-		 * up, so we can safely go to retention */
-		if (!prcmu_is_cpu_in_wfi(this_cpu ? 0 : 1))
-			goto out;
-
-		/* The prcmu will be in charge of watching the interrupts
-		 * and wake up the cpus */
-		if (prcmu_copy_gic_settings())
-			goto out;
-
-		/* Check in the meantime an interrupt did
-		 * not occur on the gic ... */
-		if (prcmu_gic_pending_irq())
-			goto out;
-
-		/* ... and the prcmu */
-		if (prcmu_pending_irq())
-			goto out;
-
-		/* Go to the retention state, the prcmu will wait for the
-		 * cpu to go WFI and this is what happens after exiting this
-		 * 'master' critical section */
-		if (prcmu_set_power_state(PRCMU_AP_IDLE, true, true))
-			goto out;
-
-		/* When we switch to retention, the prcmu is in charge
-		 * of recoupling the gic automatically */
-		recouple = false;
-
-		spin_unlock(&master_lock);
-	}
-wfi:
-	cpu_do_idle();
-out:
-	atomic_dec(&master);
-
-	if (recouple) {
-		prcmu_gic_recouple();
-		spin_unlock(&master_lock);
-	}
-
-	return index;
-}
-
-static struct cpuidle_driver ux500_idle_driver = {
-	.name = "ux500_idle",
-	.owner = THIS_MODULE,
-	.states = {
-		ARM_CPUIDLE_WFI_STATE,
-		{
-			.enter		  = ux500_enter_idle,
-			.exit_latency	  = 70,
-			.target_residency = 260,
-			.flags		  = CPUIDLE_FLAG_TIME_VALID |
-			                    CPUIDLE_FLAG_TIMER_STOP,
-			.name		  = "ApIdle",
-			.desc		  = "ARM Retention",
-		},
-	},
-	.safe_state_index = 0,
-	.state_count = 2,
-};
-
-int __init ux500_idle_init(void)
-{
-	if (!(cpu_is_u8500_family() || cpu_is_ux540_family()))
-		return -ENODEV;
-
-	/* Configure wake up reasons */
-	prcmu_enable_wakeups(PRCMU_WAKEUP(ARM) | PRCMU_WAKEUP(RTC) |
-			     PRCMU_WAKEUP(ABB));
-
-	return cpuidle_register(&ux500_idle_driver, NULL);
-}
-
-device_initcall(ux500_idle_init);
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
deleted file mode 100644
index f71b3d7..0000000
--- a/arch/arm/mach-ux500/devices-common.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-#include <linux/kernel.h>
-#include <linux/dma-mapping.h>
-#include <linux/err.h>
-#include <linux/irq.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
-
-#include "irqs.h"
-
-#include "devices-common.h"
-
-static struct platform_device *
-dbx500_add_gpio(struct device *parent, int id, resource_size_t addr, int irq,
-		struct nmk_gpio_platform_data *pdata)
-{
-	struct resource resources[] = {
-		{
-			.start	= addr,
-			.end	= addr + 127,
-			.flags	= IORESOURCE_MEM,
-		},
-		{
-			.start	= irq,
-			.end	= irq,
-			.flags	= IORESOURCE_IRQ,
-		}
-	};
-
-	return platform_device_register_resndata(
-		parent,
-		"gpio",
-		id,
-		resources,
-		ARRAY_SIZE(resources),
-		pdata,
-		sizeof(*pdata));
-}
-
-void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
-		      int irq, struct nmk_gpio_platform_data *pdata)
-{
-	int first = 0;
-	int i;
-
-	for (i = 0; i < num; i++, first += 32, irq++) {
-		pdata->first_gpio = first;
-		pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first);
-		pdata->num_gpio = 32;
-
-		dbx500_add_gpio(parent, i, base[i], irq, pdata);
-	}
-}
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
deleted file mode 100644
index 96fa4ac..0000000
--- a/arch/arm/mach-ux500/devices-common.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-#ifndef __DEVICES_COMMON_H
-#define __DEVICES_COMMON_H
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/sys_soc.h>
-#include <linux/amba/bus.h>
-#include <linux/platform_data/i2c-nomadik.h>
-#include <linux/platform_data/crypto-ux500.h>
-
-struct spi_master_cntlr;
-
-static inline struct amba_device *
-dbx500_add_msp_spi(struct device *parent, const char *name,
-		   resource_size_t base, int irq,
-		   struct spi_master_cntlr *pdata)
-{
-	return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0,
-				   pdata, 0);
-}
-
-static inline struct amba_device *
-dbx500_add_spi(struct device *parent, const char *name, resource_size_t base,
-	       int irq, struct spi_master_cntlr *pdata,
-	       u32 periphid)
-{
-	return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0,
-				   pdata, periphid);
-}
-
-struct mmci_platform_data;
-
-static inline struct amba_device *
-dbx500_add_sdi(struct device *parent, const char *name, resource_size_t base,
-	       int irq, struct mmci_platform_data *pdata, u32 periphid)
-{
-	return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0,
-				   pdata, periphid);
-}
-
-struct amba_pl011_data;
-
-static inline struct amba_device *
-dbx500_add_uart(struct device *parent, const char *name, resource_size_t base,
-		int irq, struct amba_pl011_data *pdata)
-{
-	return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, pdata, 0);
-}
-
-struct nmk_i2c_controller;
-
-static inline struct amba_device *
-dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq,
-	       struct nmk_i2c_controller *data)
-{
-	/* Conjure a name similar to what the platform device used to have */
-	char name[16];
-
-	snprintf(name, sizeof(name), "nmk-i2c.%d", id);
-	return amba_apb_device_add(parent, name, base, SZ_4K, irq, 0, data, 0);
-}
-
-static inline struct amba_device *
-dbx500_add_rtc(struct device *parent, resource_size_t base, int irq)
-{
-	return amba_apb_device_add(parent, "rtc-pl031", base, SZ_4K, irq,
-				0, NULL, 0);
-}
-
-struct cryp_platform_data;
-
-static inline struct platform_device *
-dbx500_add_cryp1(struct device *parent, int id, resource_size_t base, int irq,
-		struct cryp_platform_data *pdata)
-{
-	struct resource res[] = {
-			DEFINE_RES_MEM(base, SZ_4K),
-			DEFINE_RES_IRQ(irq),
-	};
-
-	struct platform_device_info pdevinfo = {
-			.parent = parent,
-			.name = "cryp1",
-			.id = id,
-			.res = res,
-			.num_res = ARRAY_SIZE(res),
-			.data = pdata,
-			.size_data = sizeof(*pdata),
-			.dma_mask = DMA_BIT_MASK(32),
-	};
-
-	return platform_device_register_full(&pdevinfo);
-}
-
-struct hash_platform_data;
-
-static inline struct platform_device *
-dbx500_add_hash1(struct device *parent, int id, resource_size_t base,
-		struct hash_platform_data *pdata)
-{
-	struct resource res[] = {
-			DEFINE_RES_MEM(base, SZ_4K),
-	};
-
-	struct platform_device_info pdevinfo = {
-			.parent = parent,
-			.name = "hash1",
-			.id = id,
-			.res = res,
-			.num_res = ARRAY_SIZE(res),
-			.data = pdata,
-			.size_data = sizeof(*pdata),
-			.dma_mask = DMA_BIT_MASK(32),
-	};
-
-	return platform_device_register_full(&pdevinfo);
-}
-
-struct nmk_gpio_platform_data;
-
-void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
-		      int irq, struct nmk_gpio_platform_data *pdata);
-
-static inline void
-dbx500_add_pinctrl(struct device *parent, const char *name,
-		   resource_size_t base)
-{
-	struct resource res[] = {
-		DEFINE_RES_MEM(base, SZ_8K),
-	};
-	struct platform_device_info pdevinfo = {
-		.parent = parent,
-		.name = name,
-		.id = -1,
-		.res = res,
-		.num_res = ARRAY_SIZE(res),
-	};
-
-	platform_device_register_full(&pdevinfo);
-}
-
-#endif
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 516a6f5..c59f89d 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -9,10 +9,8 @@
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/gpio.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl022.h>
-#include <linux/platform_data/dma-ste-dma40.h>
 #include <linux/mfd/dbx500-prcmu.h>
 
 #include "setup.h"
@@ -20,61 +18,6 @@
 
 #include "db8500-regs.h"
 #include "devices-db8500.h"
-#include "ste-dma40-db8500.h"
-
-static struct resource dma40_resources[] = {
-	[0] = {
-		.start = U8500_DMA_BASE,
-		.end   = U8500_DMA_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-		.name  = "base",
-	},
-	[1] = {
-		.start = U8500_DMA_LCPA_BASE,
-		.end   = U8500_DMA_LCPA_BASE + 2 * SZ_1K - 1,
-		.flags = IORESOURCE_MEM,
-		.name  = "lcpa",
-	},
-	[2] = {
-		.start = IRQ_DB8500_DMA,
-		.end   = IRQ_DB8500_DMA,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-struct stedma40_platform_data dma40_plat_data = {
-	.disabled_channels = {-1},
-};
-
-struct platform_device u8500_dma40_device = {
-	.dev = {
-		.platform_data = &dma40_plat_data,
-	},
-	.name = "dma40",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(dma40_resources),
-	.resource = dma40_resources
-};
-
-struct resource keypad_resources[] = {
-	[0] = {
-		.start = U8500_SKE_BASE,
-		.end = U8500_SKE_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_DB8500_KB,
-		.end = IRQ_DB8500_KB,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device u8500_ske_keypad_device = {
-	.name = "nmk-ske-keypad",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(keypad_resources),
-	.resource = keypad_resources,
-};
 
 struct prcmu_pdata db8500_prcmu_pdata = {
 	.ab_platdata	= &ab8500_platdata,
@@ -83,39 +26,3 @@ struct prcmu_pdata db8500_prcmu_pdata = {
 	.version_offset	= DB8500_PRCMU_FW_VERSION_OFFSET,
 	.legacy_offset	= DB8500_PRCMU_LEGACY_OFFSET,
 };
-
-static struct resource db8500_prcmu_res[] = {
-	{
-		.name  = "prcmu",
-		.start = U8500_PRCMU_BASE,
-		.end   = U8500_PRCMU_BASE + SZ_8K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name  = "prcmu-tcdm",
-		.start = U8500_PRCMU_TCDM_BASE,
-		.end   = U8500_PRCMU_TCDM_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name  = "irq",
-		.start = IRQ_DB8500_PRCMU1,
-		.end   = IRQ_DB8500_PRCMU1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name  = "prcmu-tcpm",
-		.start = U8500_PRCMU_TCPM_BASE,
-		.end   = U8500_PRCMU_TCPM_BASE + SZ_32K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device db8500_prcmu_device = {
-	.name			= "db8500-prcmu",
-	.resource		= db8500_prcmu_res,
-	.num_resources		= ARRAY_SIZE(db8500_prcmu_res),
-	.dev = {
-		.platform_data = &db8500_prcmu_pdata,
-	},
-};
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
index 3219983..b8ffc99 100644
--- a/arch/arm/mach-ux500/devices-db8500.h
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -8,122 +8,12 @@
 #ifndef __DEVICES_DB8500_H
 #define __DEVICES_DB8500_H
 
-#include <linux/platform_data/usb-musb-ux500.h>
 #include "irqs.h"
 #include "db8500-regs.h"
-#include "devices-common.h"
 
-struct ske_keypad_platform_data;
-struct pl022_ssp_controller;
 struct platform_device;
 
 extern struct ab8500_platform_data ab8500_platdata;
 extern struct prcmu_pdata db8500_prcmu_pdata;
-extern struct platform_device db8500_prcmu_device;
 
-static inline struct platform_device *
-db8500_add_ske_keypad(struct device *parent,
-		      struct ske_keypad_platform_data *pdata,
-		      size_t size)
-{
-	struct resource resources[] = {
-		DEFINE_RES_MEM(U8500_SKE_BASE, SZ_4K),
-		DEFINE_RES_IRQ(IRQ_DB8500_KB),
-	};
-
-	return platform_device_register_resndata(parent, "nmk-ske-keypad", -1,
-						 resources, 2, pdata, size);
-}
-
-static inline struct amba_device *
-db8500_add_ssp(struct device *parent, const char *name, resource_size_t base,
-	       int irq, struct pl022_ssp_controller *pdata)
-{
-	return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, pdata, 0);
-}
-
-#define db8500_add_i2c0(parent, pdata) \
-	dbx500_add_i2c(parent, 0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
-#define db8500_add_i2c1(parent, pdata) \
-	dbx500_add_i2c(parent, 1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata)
-#define db8500_add_i2c2(parent, pdata) \
-	dbx500_add_i2c(parent, 2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata)
-#define db8500_add_i2c3(parent, pdata) \
-	dbx500_add_i2c(parent, 3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata)
-#define db8500_add_i2c4(parent, pdata) \
-	dbx500_add_i2c(parent, 4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
-
-#define db8500_add_msp0_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp0", U8500_MSP0_BASE, \
-			   IRQ_DB8500_MSP0, pdata)
-#define db8500_add_msp1_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp1", U8500_MSP1_BASE, \
-			   IRQ_DB8500_MSP1, pdata)
-#define db8500_add_msp2_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp2", U8500_MSP2_BASE, \
-			   IRQ_DB8500_MSP2, pdata)
-#define db8500_add_msp3_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp3", U8500_MSP3_BASE, \
-			   IRQ_DB8500_MSP1, pdata)
-
-#define db8500_add_rtc(parent) \
-	dbx500_add_rtc(parent, U8500_RTC_BASE, IRQ_DB8500_RTC);
-
-#define db8500_add_usb(parent, rx_cfg, tx_cfg) \
-	ux500_add_usb(parent, U8500_USBOTG_BASE, \
-		      IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
-
-#define db8500_add_sdi0(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi0", U8500_SDI0_BASE, \
-		       IRQ_DB8500_SDMMC0, pdata, pid)
-#define db8500_add_sdi1(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi1", U8500_SDI1_BASE, \
-		       IRQ_DB8500_SDMMC1, pdata, pid)
-#define db8500_add_sdi2(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi2", U8500_SDI2_BASE, \
-		       IRQ_DB8500_SDMMC2, pdata, pid)
-#define db8500_add_sdi3(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi3", U8500_SDI3_BASE, \
-		       IRQ_DB8500_SDMMC3, pdata, pid)
-#define db8500_add_sdi4(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi4", U8500_SDI4_BASE, \
-		       IRQ_DB8500_SDMMC4, pdata, pid)
-#define db8500_add_sdi5(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi5", U8500_SDI5_BASE, \
-		       IRQ_DB8500_SDMMC5, pdata, pid)
-
-#define db8500_add_ssp0(parent, pdata) \
-	db8500_add_ssp(parent, "ssp0", U8500_SSP0_BASE, \
-		       IRQ_DB8500_SSP0, pdata)
-#define db8500_add_ssp1(parent, pdata) \
-	db8500_add_ssp(parent, "ssp1", U8500_SSP1_BASE, \
-		       IRQ_DB8500_SSP1, pdata)
-
-#define db8500_add_spi0(parent, pdata) \
-	dbx500_add_spi(parent, "spi0", U8500_SPI0_BASE, \
-		       IRQ_DB8500_SPI0, pdata, 0)
-#define db8500_add_spi1(parent, pdata) \
-	dbx500_add_spi(parent, "spi1", U8500_SPI1_BASE, \
-		       IRQ_DB8500_SPI1, pdata, 0)
-#define db8500_add_spi2(parent, pdata) \
-	dbx500_add_spi(parent, "spi2", U8500_SPI2_BASE, \
-		       IRQ_DB8500_SPI2, pdata, 0)
-#define db8500_add_spi3(parent, pdata) \
-	dbx500_add_spi(parent, "spi3", U8500_SPI3_BASE, \
-		       IRQ_DB8500_SPI3, pdata, 0)
-
-#define db8500_add_uart0(parent, pdata) \
-	dbx500_add_uart(parent, "uart0", U8500_UART0_BASE, \
-			IRQ_DB8500_UART0, pdata)
-#define db8500_add_uart1(parent, pdata) \
-	dbx500_add_uart(parent, "uart1", U8500_UART1_BASE, \
-			IRQ_DB8500_UART1, pdata)
-#define db8500_add_uart2(parent, pdata) \
-	dbx500_add_uart(parent, "uart2", U8500_UART2_BASE, \
-			IRQ_DB8500_UART2, pdata)
-
-#define db8500_add_cryp1(parent, pdata) \
-	dbx500_add_cryp1(parent, -1, U8500_CRYP1_BASE, IRQ_DB8500_CRYP1, pdata)
-#define db8500_add_hash1(parent, pdata) \
-	dbx500_add_hash1(parent, -1, U8500_HASH1_BASE, pdata)
 #endif
diff --git a/arch/arm/mach-ux500/devices.h b/arch/arm/mach-ux500/devices.h
index cbc6f1e..5bca7c6 100644
--- a/arch/arm/mach-ux500/devices.h
+++ b/arch/arm/mach-ux500/devices.h
@@ -10,14 +10,6 @@
 struct platform_device;
 struct amba_device;
 
-extern struct platform_device u8500_gpio_devs[];
-
 extern struct amba_device ux500_pl031_device;
 
-extern struct platform_device ux500_hash1_device;
-extern struct platform_device ux500_cryp1_device;
-
-extern struct platform_device u8500_dma40_device;
-extern struct platform_device ux500_ske_keypad_device;
-
 #endif
diff --git a/arch/arm/mach-ux500/headsmp.S b/arch/arm/mach-ux500/headsmp.S
index 08da5589..9cdea04 100644
--- a/arch/arm/mach-ux500/headsmp.S
+++ b/arch/arm/mach-ux500/headsmp.S
@@ -11,8 +11,6 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
-	__INIT
-
 /*
  * U8500 specific entry point for secondary CPUs.
  */
diff --git a/arch/arm/mach-ux500/pins-db8500.h b/arch/arm/mach-ux500/pins-db8500.h
deleted file mode 100644
index 062c7ac..0000000
--- a/arch/arm/mach-ux500/pins-db8500.h
+++ /dev/null
@@ -1,746 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License, version 2
- * Author: Rabin Vincent <rabin.vincent@stericsson.com>
- */
-
-#ifndef __MACH_PINS_DB8500_H
-#define __MACH_PINS_DB8500_H
-
-/*
- * TODO: Eventually encode all non-board specific pull up/down configuration
- * here.
- */
-
-#define GPIO0_GPIO		PIN_CFG(0, GPIO)
-#define GPIO0_U0_CTSn		PIN_CFG(0, ALT_A)
-#define GPIO0_TRIG_OUT		PIN_CFG(0, ALT_B)
-#define GPIO0_IP_TDO		PIN_CFG(0, ALT_C)
-
-#define GPIO1_GPIO		PIN_CFG(1, GPIO)
-#define GPIO1_U0_RTSn		PIN_CFG(1, ALT_A)
-#define GPIO1_TRIG_IN		PIN_CFG(1, ALT_B)
-#define GPIO1_IP_TDI		PIN_CFG(1, ALT_C)
-
-#define GPIO2_GPIO		PIN_CFG(2, GPIO)
-#define GPIO2_U0_RXD		PIN_CFG(2, ALT_A)
-#define GPIO2_NONE		PIN_CFG(2, ALT_B)
-#define GPIO2_IP_TMS		PIN_CFG(2, ALT_C)
-
-#define GPIO3_GPIO		PIN_CFG(3, GPIO)
-#define GPIO3_U0_TXD		PIN_CFG(3, ALT_A)
-#define GPIO3_NONE		PIN_CFG(3, ALT_B)
-#define GPIO3_IP_TCK		PIN_CFG(3, ALT_C)
-
-#define GPIO4_GPIO		PIN_CFG(4, GPIO)
-#define GPIO4_U1_RXD		PIN_CFG(4, ALT_A)
-#define GPIO4_I2C4_SCL		PIN_CFG(4, ALT_B)
-#define GPIO4_IP_TRSTn		PIN_CFG(4, ALT_C)
-
-#define GPIO5_GPIO		PIN_CFG(5, GPIO)
-#define GPIO5_U1_TXD		PIN_CFG(5, ALT_A)
-#define GPIO5_I2C4_SDA		PIN_CFG(5, ALT_B)
-#define GPIO5_IP_GPIO6		PIN_CFG(5, ALT_C)
-
-#define GPIO6_GPIO		PIN_CFG(6, GPIO)
-#define GPIO6_U1_CTSn		PIN_CFG(6, ALT_A)
-#define GPIO6_I2C1_SCL		PIN_CFG(6, ALT_B)
-#define GPIO6_IP_GPIO0		PIN_CFG(6, ALT_C)
-
-#define GPIO7_GPIO		PIN_CFG(7, GPIO)
-#define GPIO7_U1_RTSn		PIN_CFG(7, ALT_A)
-#define GPIO7_I2C1_SDA		PIN_CFG(7, ALT_B)
-#define GPIO7_IP_GPIO1		PIN_CFG(7, ALT_C)
-
-#define GPIO8_GPIO		PIN_CFG(8, GPIO)
-#define GPIO8_IPI2C_SDA		PIN_CFG(8, ALT_A)
-#define GPIO8_I2C2_SDA		PIN_CFG(8, ALT_B)
-
-#define GPIO9_GPIO		PIN_CFG(9, GPIO)
-#define GPIO9_IPI2C_SCL		PIN_CFG(9, ALT_A)
-#define GPIO9_I2C2_SCL		PIN_CFG(9, ALT_B)
-
-#define GPIO10_GPIO		PIN_CFG(10, GPIO)
-#define GPIO10_IPI2C_SDA	PIN_CFG(10, ALT_A)
-#define GPIO10_I2C2_SDA		PIN_CFG(10, ALT_B)
-#define GPIO10_IP_GPIO3		PIN_CFG(10, ALT_C)
-
-#define GPIO11_GPIO		PIN_CFG(11, GPIO)
-#define GPIO11_IPI2C_SCL	PIN_CFG(11, ALT_A)
-#define GPIO11_I2C2_SCL		PIN_CFG(11, ALT_B)
-#define GPIO11_IP_GPIO2		PIN_CFG(11, ALT_C)
-
-#define GPIO12_GPIO		PIN_CFG(12, GPIO)
-#define GPIO12_MSP0_TXD		PIN_CFG(12, ALT_A)
-#define GPIO12_MSP0_RXD		PIN_CFG(12, ALT_B)
-
-#define GPIO13_GPIO		PIN_CFG(13, GPIO)
-#define GPIO13_MSP0_TFS		PIN_CFG(13, ALT_A)
-
-#define GPIO14_GPIO		PIN_CFG(14, GPIO)
-#define GPIO14_MSP0_TCK		PIN_CFG(14, ALT_A)
-
-#define GPIO15_GPIO		PIN_CFG(15, GPIO)
-#define GPIO15_MSP0_RXD		PIN_CFG(15, ALT_A)
-#define GPIO15_MSP0_TXD		PIN_CFG(15, ALT_B)
-
-#define GPIO16_GPIO		PIN_CFG(16, GPIO)
-#define GPIO16_MSP0_RFS		PIN_CFG(16, ALT_A)
-#define GPIO16_I2C1_SCL		PIN_CFG(16, ALT_B)
-#define GPIO16_SLIM0_DAT	PIN_CFG(16, ALT_C)
-
-#define GPIO17_GPIO		PIN_CFG(17, GPIO)
-#define GPIO17_MSP0_RCK		PIN_CFG(17, ALT_A)
-#define GPIO17_I2C1_SDA		PIN_CFG(17, ALT_B)
-#define GPIO17_SLIM0_CLK	PIN_CFG(17, ALT_C)
-
-#define GPIO18_GPIO		PIN_CFG(18, GPIO)
-#define GPIO18_MC0_CMDDIR	PIN_CFG_INPUT(18, ALT_A, PULLUP)
-#define GPIO18_U2_RXD		PIN_CFG(18, ALT_B)
-#define GPIO18_MS_IEP		PIN_CFG(18, ALT_C)
-
-#define GPIO19_GPIO		PIN_CFG(19, GPIO)
-#define GPIO19_MC0_DAT0DIR	PIN_CFG_INPUT(19, ALT_A, PULLUP)
-#define GPIO19_U2_TXD		PIN_CFG(19, ALT_B)
-#define GPIO19_MS_DAT0DIR	PIN_CFG(19, ALT_C)
-
-#define GPIO20_GPIO		PIN_CFG(20, GPIO)
-#define GPIO20_MC0_DAT2DIR	PIN_CFG_INPUT(20, ALT_A, PULLUP)
-#define GPIO20_UARTMOD_TXD	PIN_CFG(20, ALT_B)
-#define GPIO20_IP_TRIGOUT	PIN_CFG(20, ALT_C)
-
-#define GPIO21_GPIO		PIN_CFG(21, GPIO)
-#define GPIO21_MC0_DAT31DIR	PIN_CFG_INPUT(21, ALT_A, PULLUP)
-#define GPIO21_MSP0_SCK		PIN_CFG(21, ALT_B)
-#define GPIO21_MS_DAT31DIR	PIN_CFG(21, ALT_C)
-
-#define GPIO22_GPIO		PIN_CFG(22, GPIO)
-#define GPIO22_MC0_FBCLK	PIN_CFG_INPUT(22, ALT_A, PULLUP)
-#define GPIO22_UARTMOD_RXD	PIN_CFG(22, ALT_B)
-#define GPIO22_MS_FBCLK		PIN_CFG(22, ALT_C)
-
-#define GPIO23_GPIO		PIN_CFG(23, GPIO)
-#define GPIO23_MC0_CLK		PIN_CFG_INPUT(23, ALT_A, PULLUP)
-#define GPIO23_STMMOD_CLK	PIN_CFG(23, ALT_B)
-#define GPIO23_MS_CLK		PIN_CFG(23, ALT_C)
-
-#define GPIO24_GPIO		PIN_CFG(24, GPIO)
-#define GPIO24_MC0_CMD		PIN_CFG_INPUT(24, ALT_A, PULLUP)
-#define GPIO24_UARTMOD_RXD	PIN_CFG(24, ALT_B)
-#define GPIO24_MS_BS		PIN_CFG(24, ALT_C)
-
-#define GPIO25_GPIO		PIN_CFG(25, GPIO)
-#define GPIO25_MC0_DAT0		PIN_CFG_INPUT(25, ALT_A, PULLUP)
-#define GPIO25_STMMOD_DAT0	PIN_CFG(25, ALT_B)
-#define GPIO25_MS_DAT0		PIN_CFG(25, ALT_C)
-
-#define GPIO26_GPIO		PIN_CFG(26, GPIO)
-#define GPIO26_MC0_DAT1		PIN_CFG_INPUT(26, ALT_A, PULLUP)
-#define GPIO26_STMMOD_DAT1	PIN_CFG(26, ALT_B)
-#define GPIO26_MS_DAT1		PIN_CFG(26, ALT_C)
-
-#define GPIO27_GPIO		PIN_CFG(27, GPIO)
-#define GPIO27_MC0_DAT2		PIN_CFG_INPUT(27, ALT_A, PULLUP)
-#define GPIO27_STMMOD_DAT2	PIN_CFG(27, ALT_B)
-#define GPIO27_MS_DAT2		PIN_CFG(27, ALT_C)
-
-#define GPIO28_GPIO		PIN_CFG(28, GPIO)
-#define GPIO28_MC0_DAT3		PIN_CFG_INPUT(28, ALT_A, PULLUP)
-#define GPIO28_STMMOD_DAT3	PIN_CFG(28, ALT_B)
-#define GPIO28_MS_DAT3		PIN_CFG(28, ALT_C)
-
-#define GPIO29_GPIO		PIN_CFG(29, GPIO)
-#define GPIO29_MC0_DAT4		PIN_CFG(29, ALT_A)
-#define GPIO29_SPI3_CLK		PIN_CFG(29, ALT_B)
-#define GPIO29_U2_RXD		PIN_CFG(29, ALT_C)
-
-#define GPIO30_GPIO		PIN_CFG(30, GPIO)
-#define GPIO30_MC0_DAT5		PIN_CFG(30, ALT_A)
-#define GPIO30_SPI3_RXD		PIN_CFG(30, ALT_B)
-#define GPIO30_U2_TXD		PIN_CFG(30, ALT_C)
-
-#define GPIO31_GPIO		PIN_CFG(31, GPIO)
-#define GPIO31_MC0_DAT6		PIN_CFG(31, ALT_A)
-#define GPIO31_SPI3_FRM		PIN_CFG(31, ALT_B)
-#define GPIO31_U2_CTSn		PIN_CFG(31, ALT_C)
-
-#define GPIO32_GPIO		PIN_CFG(32, GPIO)
-#define GPIO32_MC0_DAT7		PIN_CFG(32, ALT_A)
-#define GPIO32_SPI3_TXD		PIN_CFG(32, ALT_B)
-#define GPIO32_U2_RTSn		PIN_CFG(32, ALT_C)
-
-#define GPIO33_GPIO		PIN_CFG(33, GPIO)
-#define GPIO33_MSP1_TXD		PIN_CFG(33, ALT_A)
-#define GPIO33_MSP1_RXD		PIN_CFG(33, ALT_B)
-#define GPIO33_U0_DTRn		PIN_CFG(33, ALT_C)
-
-#define GPIO34_GPIO		PIN_CFG(34, GPIO)
-#define GPIO34_MSP1_TFS		PIN_CFG(34, ALT_A)
-#define GPIO34_NONE		PIN_CFG(34, ALT_B)
-#define GPIO34_U0_DCDn		PIN_CFG(34, ALT_C)
-
-#define GPIO35_GPIO		PIN_CFG(35, GPIO)
-#define GPIO35_MSP1_TCK		PIN_CFG(35, ALT_A)
-#define GPIO35_NONE		PIN_CFG(35, ALT_B)
-#define GPIO35_U0_DSRn		PIN_CFG(35, ALT_C)
-
-#define GPIO36_GPIO		PIN_CFG(36, GPIO)
-#define GPIO36_MSP1_RXD		PIN_CFG(36, ALT_A)
-#define GPIO36_MSP1_TXD		PIN_CFG(36, ALT_B)
-#define GPIO36_U0_RIn		PIN_CFG(36, ALT_C)
-
-#define GPIO64_GPIO		PIN_CFG(64, GPIO)
-#define GPIO64_LCDB_DE		PIN_CFG(64, ALT_A)
-#define GPIO64_KP_O1		PIN_CFG(64, ALT_B)
-#define GPIO64_IP_GPIO4		PIN_CFG(64, ALT_C)
-
-#define GPIO65_GPIO		PIN_CFG(65, GPIO)
-#define GPIO65_LCDB_HSO		PIN_CFG(65, ALT_A)
-#define GPIO65_KP_O0		PIN_CFG(65, ALT_B)
-#define GPIO65_IP_GPIO5		PIN_CFG(65, ALT_C)
-
-#define GPIO66_GPIO		PIN_CFG(66, GPIO)
-#define GPIO66_LCDB_VSO		PIN_CFG(66, ALT_A)
-#define GPIO66_KP_I1		PIN_CFG(66, ALT_B)
-#define GPIO66_IP_GPIO6		PIN_CFG(66, ALT_C)
-
-#define GPIO67_GPIO		PIN_CFG(67, GPIO)
-#define GPIO67_LCDB_CLK		PIN_CFG(67, ALT_A)
-#define GPIO67_KP_I0		PIN_CFG(67, ALT_B)
-#define GPIO67_IP_GPIO7		PIN_CFG(67, ALT_C)
-
-#define GPIO68_GPIO		PIN_CFG(68, GPIO)
-#define GPIO68_LCD_VSI0		PIN_CFG(68, ALT_A)
-#define GPIO68_KP_O7		PIN_CFG(68, ALT_B)
-#define GPIO68_SM_CLE		PIN_CFG(68, ALT_C)
-
-#define GPIO69_GPIO		PIN_CFG(69, GPIO)
-#define GPIO69_LCD_VSI1		PIN_CFG(69, ALT_A)
-#define GPIO69_KP_I7		PIN_CFG(69, ALT_B)
-#define GPIO69_SM_ALE		PIN_CFG(69, ALT_C)
-
-#define GPIO70_GPIO		PIN_CFG(70, GPIO)
-#define GPIO70_LCD_D0		PIN_CFG(70, ALT_A)
-#define GPIO70_KP_O5		PIN_CFG(70, ALT_B)
-#define GPIO70_STMAPE_CLK	PIN_CFG(70, ALT_C)
-
-#define GPIO71_GPIO		PIN_CFG(71, GPIO)
-#define GPIO71_LCD_D1		PIN_CFG(71, ALT_A)
-#define GPIO71_KP_O4		PIN_CFG(71, ALT_B)
-#define GPIO71_STMAPE_DAT3	PIN_CFG(71, ALT_C)
-
-#define GPIO72_GPIO		PIN_CFG(72, GPIO)
-#define GPIO72_LCD_D2		PIN_CFG(72, ALT_A)
-#define GPIO72_KP_O3		PIN_CFG(72, ALT_B)
-#define GPIO72_STMAPE_DAT2	PIN_CFG(72, ALT_C)
-
-#define GPIO73_GPIO		PIN_CFG(73, GPIO)
-#define GPIO73_LCD_D3		PIN_CFG(73, ALT_A)
-#define GPIO73_KP_O2		PIN_CFG(73, ALT_B)
-#define GPIO73_STMAPE_DAT1	PIN_CFG(73, ALT_C)
-
-#define GPIO74_GPIO		PIN_CFG(74, GPIO)
-#define GPIO74_LCD_D4		PIN_CFG(74, ALT_A)
-#define GPIO74_KP_I5		PIN_CFG(74, ALT_B)
-#define GPIO74_STMAPE_DAT0	PIN_CFG(74, ALT_C)
-
-#define GPIO75_GPIO		PIN_CFG(75, GPIO)
-#define GPIO75_LCD_D5		PIN_CFG(75, ALT_A)
-#define GPIO75_KP_I4		PIN_CFG(75, ALT_B)
-#define GPIO75_U2_RXD		PIN_CFG(75, ALT_C)
-
-#define GPIO76_GPIO		PIN_CFG(76, GPIO)
-#define GPIO76_LCD_D6		PIN_CFG(76, ALT_A)
-#define GPIO76_KP_I3		PIN_CFG(76, ALT_B)
-#define GPIO76_U2_TXD		PIN_CFG(76, ALT_C)
-
-#define GPIO77_GPIO		PIN_CFG(77, GPIO)
-#define GPIO77_LCD_D7		PIN_CFG(77, ALT_A)
-#define GPIO77_KP_I2		PIN_CFG(77, ALT_B)
-#define GPIO77_NONE		PIN_CFG(77, ALT_C)
-
-#define GPIO78_GPIO		PIN_CFG(78, GPIO)
-#define GPIO78_LCD_D8		PIN_CFG(78, ALT_A)
-#define GPIO78_KP_O6		PIN_CFG(78, ALT_B)
-#define GPIO78_IP_GPIO2		PIN_CFG(78, ALT_C)
-
-#define GPIO79_GPIO		PIN_CFG(79, GPIO)
-#define GPIO79_LCD_D9		PIN_CFG(79, ALT_A)
-#define GPIO79_KP_I6		PIN_CFG(79, ALT_B)
-#define GPIO79_IP_GPIO3		PIN_CFG(79, ALT_C)
-
-#define GPIO80_GPIO		PIN_CFG(80, GPIO)
-#define GPIO80_LCD_D10		PIN_CFG(80, ALT_A)
-#define GPIO80_KP_SKA0		PIN_CFG(80, ALT_B)
-#define GPIO80_IP_GPIO4		PIN_CFG(80, ALT_C)
-
-#define GPIO81_GPIO		PIN_CFG(81, GPIO)
-#define GPIO81_LCD_D11		PIN_CFG(81, ALT_A)
-#define GPIO81_KP_SKB0		PIN_CFG(81, ALT_B)
-#define GPIO81_IP_GPIO5		PIN_CFG(81, ALT_C)
-
-#define GPIO82_GPIO		PIN_CFG(82, GPIO)
-#define GPIO82_LCD_D12		PIN_CFG(82, ALT_A)
-#define GPIO82_KP_O5		PIN_CFG(82, ALT_B)
-
-#define GPIO83_GPIO		PIN_CFG(83, GPIO)
-#define GPIO83_LCD_D13		PIN_CFG(83, ALT_A)
-#define GPIO83_KP_O4		PIN_CFG(83, ALT_B)
-
-#define GPIO84_GPIO		PIN_CFG(84, GPIO)
-#define GPIO84_LCD_D14		PIN_CFG(84, ALT_A)
-#define GPIO84_KP_I5		PIN_CFG(84, ALT_B)
-
-#define GPIO85_GPIO		PIN_CFG(85, GPIO)
-#define GPIO85_LCD_D15		PIN_CFG(85, ALT_A)
-#define GPIO85_KP_I4		PIN_CFG(85, ALT_B)
-
-#define GPIO86_GPIO		PIN_CFG(86, GPIO)
-#define GPIO86_LCD_D16		PIN_CFG(86, ALT_A)
-#define GPIO86_SM_ADQ0		PIN_CFG(86, ALT_B)
-#define GPIO86_MC5_DAT0		PIN_CFG(86, ALT_C)
-
-#define GPIO87_GPIO		PIN_CFG(87, GPIO)
-#define GPIO87_LCD_D17		PIN_CFG(87, ALT_A)
-#define GPIO87_SM_ADQ1		PIN_CFG(87, ALT_B)
-#define GPIO87_MC5_DAT1		PIN_CFG(87, ALT_C)
-
-#define GPIO88_GPIO		PIN_CFG(88, GPIO)
-#define GPIO88_LCD_D18		PIN_CFG(88, ALT_A)
-#define GPIO88_SM_ADQ2		PIN_CFG(88, ALT_B)
-#define GPIO88_MC5_DAT2		PIN_CFG(88, ALT_C)
-
-#define GPIO89_GPIO		PIN_CFG(89, GPIO)
-#define GPIO89_LCD_D19		PIN_CFG(89, ALT_A)
-#define GPIO89_SM_ADQ3		PIN_CFG(89, ALT_B)
-#define GPIO89_MC5_DAT3		PIN_CFG(89, ALT_C)
-
-#define GPIO90_GPIO		PIN_CFG(90, GPIO)
-#define GPIO90_LCD_D20		PIN_CFG(90, ALT_A)
-#define GPIO90_SM_ADQ4		PIN_CFG(90, ALT_B)
-#define GPIO90_MC5_CMD		PIN_CFG(90, ALT_C)
-
-#define GPIO91_GPIO		PIN_CFG(91, GPIO)
-#define GPIO91_LCD_D21		PIN_CFG(91, ALT_A)
-#define GPIO91_SM_ADQ5		PIN_CFG(91, ALT_B)
-#define GPIO91_MC5_FBCLK	PIN_CFG(91, ALT_C)
-
-#define GPIO92_GPIO		PIN_CFG(92, GPIO)
-#define GPIO92_LCD_D22		PIN_CFG(92, ALT_A)
-#define GPIO92_SM_ADQ6		PIN_CFG(92, ALT_B)
-#define GPIO92_MC5_CLK		PIN_CFG(92, ALT_C)
-
-#define GPIO93_GPIO		PIN_CFG(93, GPIO)
-#define GPIO93_LCD_D23		PIN_CFG(93, ALT_A)
-#define GPIO93_SM_ADQ7		PIN_CFG(93, ALT_B)
-#define GPIO93_MC5_DAT4		PIN_CFG(93, ALT_C)
-
-#define GPIO94_GPIO		PIN_CFG(94, GPIO)
-#define GPIO94_KP_O7		PIN_CFG(94, ALT_A)
-#define GPIO94_SM_ADVn		PIN_CFG(94, ALT_B)
-#define GPIO94_MC5_DAT5		PIN_CFG(94, ALT_C)
-
-#define GPIO95_GPIO		PIN_CFG(95, GPIO)
-#define GPIO95_KP_I7		PIN_CFG(95, ALT_A)
-#define GPIO95_SM_CS0n		PIN_CFG(95, ALT_B)
-#define GPIO95_SM_PS0n		PIN_CFG(95, ALT_C)
-
-#define GPIO96_GPIO		PIN_CFG(96, GPIO)
-#define GPIO96_KP_O6		PIN_CFG(96, ALT_A)
-#define GPIO96_SM_OEn		PIN_CFG(96, ALT_B)
-#define GPIO96_MC5_DAT6		PIN_CFG(96, ALT_C)
-
-#define GPIO97_GPIO		PIN_CFG(97, GPIO)
-#define GPIO97_KP_I6		PIN_CFG(97, ALT_A)
-#define GPIO97_SM_WEn		PIN_CFG(97, ALT_B)
-#define GPIO97_MC5_DAT7		PIN_CFG(97, ALT_C)
-
-#define GPIO128_GPIO		PIN_CFG(128, GPIO)
-#define GPIO128_MC2_CLK		PIN_CFG_INPUT(128, ALT_A, PULLUP)
-#define GPIO128_SM_CKO		PIN_CFG(128, ALT_B)
-
-#define GPIO129_GPIO		PIN_CFG(129, GPIO)
-#define GPIO129_MC2_CMD		PIN_CFG_INPUT(129, ALT_A, PULLUP)
-#define GPIO129_SM_WAIT0n	PIN_CFG(129, ALT_B)
-
-#define GPIO130_GPIO		PIN_CFG(130, GPIO)
-#define GPIO130_MC2_FBCLK	PIN_CFG_INPUT(130, ALT_A, PULLUP)
-#define GPIO130_SM_FBCLK	PIN_CFG(130, ALT_B)
-#define GPIO130_MC2_RSTN	PIN_CFG(130, ALT_C)
-
-#define GPIO131_GPIO		PIN_CFG(131, GPIO)
-#define GPIO131_MC2_DAT0	PIN_CFG_INPUT(131, ALT_A, PULLUP)
-#define GPIO131_SM_ADQ8		PIN_CFG(131, ALT_B)
-
-#define GPIO132_GPIO		PIN_CFG(132, GPIO)
-#define GPIO132_MC2_DAT1	PIN_CFG_INPUT(132, ALT_A, PULLUP)
-#define GPIO132_SM_ADQ9		PIN_CFG(132, ALT_B)
-
-#define GPIO133_GPIO		PIN_CFG(133, GPIO)
-#define GPIO133_MC2_DAT2	PIN_CFG_INPUT(133, ALT_A, PULLUP)
-#define GPIO133_SM_ADQ10	PIN_CFG(133, ALT_B)
-
-#define GPIO134_GPIO		PIN_CFG(134, GPIO)
-#define GPIO134_MC2_DAT3	PIN_CFG_INPUT(134, ALT_A, PULLUP)
-#define GPIO134_SM_ADQ11	PIN_CFG(134, ALT_B)
-
-#define GPIO135_GPIO		PIN_CFG(135, GPIO)
-#define GPIO135_MC2_DAT4	PIN_CFG_INPUT(135, ALT_A, PULLUP)
-#define GPIO135_SM_ADQ12	PIN_CFG(135, ALT_B)
-
-#define GPIO136_GPIO		PIN_CFG(136, GPIO)
-#define GPIO136_MC2_DAT5	PIN_CFG_INPUT(136, ALT_A, PULLUP)
-#define GPIO136_SM_ADQ13	PIN_CFG(136, ALT_B)
-
-#define GPIO137_GPIO		PIN_CFG(137, GPIO)
-#define GPIO137_MC2_DAT6	PIN_CFG_INPUT(137, ALT_A, PULLUP)
-#define GPIO137_SM_ADQ14	PIN_CFG(137, ALT_B)
-
-#define GPIO138_GPIO		PIN_CFG(138, GPIO)
-#define GPIO138_MC2_DAT7	PIN_CFG_INPUT(138, ALT_A, PULLUP)
-#define GPIO138_SM_ADQ15	PIN_CFG(138, ALT_B)
-
-#define GPIO139_GPIO		PIN_CFG(139, GPIO)
-#define GPIO139_SSP1_RXD	PIN_CFG(139, ALT_A)
-#define GPIO139_SM_WAIT1n	PIN_CFG(139, ALT_B)
-#define GPIO139_KP_O8		PIN_CFG(139, ALT_C)
-
-#define GPIO140_GPIO		PIN_CFG(140, GPIO)
-#define GPIO140_SSP1_TXD	PIN_CFG(140, ALT_A)
-#define GPIO140_IP_GPIO7	PIN_CFG(140, ALT_B)
-#define GPIO140_KP_SKA1		PIN_CFG(140, ALT_C)
-
-#define GPIO141_GPIO		PIN_CFG(141, GPIO)
-#define GPIO141_SSP1_CLK	PIN_CFG(141, ALT_A)
-#define GPIO141_IP_GPIO2	PIN_CFG(141, ALT_B)
-#define GPIO141_KP_O9		PIN_CFG(141, ALT_C)
-
-#define GPIO142_GPIO		PIN_CFG(142, GPIO)
-#define GPIO142_SSP1_FRM	PIN_CFG(142, ALT_A)
-#define GPIO142_IP_GPIO3	PIN_CFG(142, ALT_B)
-#define GPIO142_KP_SKB1		PIN_CFG(142, ALT_C)
-
-#define GPIO143_GPIO		PIN_CFG(143, GPIO)
-#define GPIO143_SSP0_CLK	PIN_CFG(143, ALT_A)
-
-#define GPIO144_GPIO		PIN_CFG(144, GPIO)
-#define GPIO144_SSP0_FRM	PIN_CFG(144, ALT_A)
-
-#define GPIO145_GPIO		PIN_CFG(145, GPIO)
-#define GPIO145_SSP0_RXD	PIN_CFG(145, ALT_A)
-
-#define GPIO146_GPIO		PIN_CFG(146, GPIO)
-#define GPIO146_SSP0_TXD	PIN_CFG(146, ALT_A)
-
-#define GPIO147_GPIO		PIN_CFG(147, GPIO)
-#define GPIO147_I2C0_SCL	PIN_CFG(147, ALT_A)
-
-#define GPIO148_GPIO		PIN_CFG(148, GPIO)
-#define GPIO148_I2C0_SDA	PIN_CFG(148, ALT_A)
-
-#define GPIO149_GPIO		PIN_CFG(149, GPIO)
-#define GPIO149_IP_GPIO0	PIN_CFG(149, ALT_A)
-#define GPIO149_SM_CS1n		PIN_CFG(149, ALT_B)
-#define GPIO149_SM_PS1n		PIN_CFG(149, ALT_C)
-
-#define GPIO150_GPIO		PIN_CFG(150, GPIO)
-#define GPIO150_IP_GPIO1	PIN_CFG(150, ALT_A)
-#define GPIO150_LCDA_CLK	PIN_CFG(150, ALT_B)
-
-#define GPIO151_GPIO		PIN_CFG(151, GPIO)
-#define GPIO151_KP_SKA0		PIN_CFG(151, ALT_A)
-#define GPIO151_LCD_VSI0	PIN_CFG(151, ALT_B)
-#define GPIO151_KP_O8		PIN_CFG(151, ALT_C)
-
-#define GPIO152_GPIO		PIN_CFG(152, GPIO)
-#define GPIO152_KP_SKB0		PIN_CFG(152, ALT_A)
-#define GPIO152_LCD_VSI1	PIN_CFG(152, ALT_B)
-#define GPIO152_KP_O9		PIN_CFG(152, ALT_C)
-
-#define GPIO153_GPIO		PIN_CFG(153, GPIO)
-#define GPIO153_KP_I7		PIN_CFG(153, ALT_A)
-#define GPIO153_LCD_D24		PIN_CFG(153, ALT_B)
-#define GPIO153_U2_RXD		PIN_CFG(153, ALT_C)
-
-#define GPIO154_GPIO		PIN_CFG(154, GPIO)
-#define GPIO154_KP_I6		PIN_CFG(154, ALT_A)
-#define GPIO154_LCD_D25		PIN_CFG(154, ALT_B)
-#define GPIO154_U2_TXD		PIN_CFG(154, ALT_C)
-
-#define GPIO155_GPIO		PIN_CFG(155, GPIO)
-#define GPIO155_KP_I5		PIN_CFG(155, ALT_A)
-#define GPIO155_LCD_D26		PIN_CFG(155, ALT_B)
-#define GPIO155_STMAPE_CLK	PIN_CFG(155, ALT_C)
-
-#define GPIO156_GPIO		PIN_CFG(156, GPIO)
-#define GPIO156_KP_I4		PIN_CFG(156, ALT_A)
-#define GPIO156_LCD_D27		PIN_CFG(156, ALT_B)
-#define GPIO156_STMAPE_DAT3	PIN_CFG(156, ALT_C)
-
-#define GPIO157_GPIO		PIN_CFG(157, GPIO)
-#define GPIO157_KP_O7		PIN_CFG(157, ALT_A)
-#define GPIO157_LCD_D28		PIN_CFG(157, ALT_B)
-#define GPIO157_STMAPE_DAT2	PIN_CFG(157, ALT_C)
-
-#define GPIO158_GPIO		PIN_CFG(158, GPIO)
-#define GPIO158_KP_O6		PIN_CFG(158, ALT_A)
-#define GPIO158_LCD_D29		PIN_CFG(158, ALT_B)
-#define GPIO158_STMAPE_DAT1	PIN_CFG(158, ALT_C)
-
-#define GPIO159_GPIO		PIN_CFG(159, GPIO)
-#define GPIO159_KP_O5		PIN_CFG(159, ALT_A)
-#define GPIO159_LCD_D30		PIN_CFG(159, ALT_B)
-#define GPIO159_STMAPE_DAT0	PIN_CFG(159, ALT_C)
-
-#define GPIO160_GPIO		PIN_CFG(160, GPIO)
-#define GPIO160_KP_O4		PIN_CFG(160, ALT_A)
-#define GPIO160_LCD_D31		PIN_CFG(160, ALT_B)
-#define GPIO160_NONE		PIN_CFG(160, ALT_C)
-
-#define GPIO161_GPIO		PIN_CFG(161, GPIO)
-#define GPIO161_KP_I3		PIN_CFG(161, ALT_A)
-#define GPIO161_LCD_D32		PIN_CFG(161, ALT_B)
-#define GPIO161_UARTMOD_RXD	PIN_CFG(161, ALT_C)
-
-#define GPIO162_GPIO		PIN_CFG(162, GPIO)
-#define GPIO162_KP_I2		PIN_CFG(162, ALT_A)
-#define GPIO162_LCD_D33		PIN_CFG(162, ALT_B)
-#define GPIO162_UARTMOD_TXD	PIN_CFG(162, ALT_C)
-
-#define GPIO163_GPIO		PIN_CFG(163, GPIO)
-#define GPIO163_KP_I1		PIN_CFG(163, ALT_A)
-#define GPIO163_LCD_D34		PIN_CFG(163, ALT_B)
-#define GPIO163_STMMOD_CLK	PIN_CFG(163, ALT_C)
-
-#define GPIO164_GPIO		PIN_CFG(164, GPIO)
-#define GPIO164_KP_I0		PIN_CFG(164, ALT_A)
-#define GPIO164_LCD_D35		PIN_CFG(164, ALT_B)
-#define GPIO164_STMMOD_DAT3	PIN_CFG(164, ALT_C)
-
-#define GPIO165_GPIO		PIN_CFG(165, GPIO)
-#define GPIO165_KP_O3		PIN_CFG(165, ALT_A)
-#define GPIO165_LCD_D36		PIN_CFG(165, ALT_B)
-#define GPIO165_STMMOD_DAT2	PIN_CFG(165, ALT_C)
-
-#define GPIO166_GPIO		PIN_CFG(166, GPIO)
-#define GPIO166_KP_O2		PIN_CFG(166, ALT_A)
-#define GPIO166_LCD_D37		PIN_CFG(166, ALT_B)
-#define GPIO166_STMMOD_DAT1	PIN_CFG(166, ALT_C)
-
-#define GPIO167_GPIO		PIN_CFG(167, GPIO)
-#define GPIO167_KP_O1		PIN_CFG(167, ALT_A)
-#define GPIO167_LCD_D38		PIN_CFG(167, ALT_B)
-#define GPIO167_STMMOD_DAT0	PIN_CFG(167, ALT_C)
-
-#define GPIO168_GPIO		PIN_CFG(168, GPIO)
-#define GPIO168_KP_O0		PIN_CFG(168, ALT_A)
-#define GPIO168_LCD_D39		PIN_CFG(168, ALT_B)
-#define GPIO168_NONE		PIN_CFG(168, ALT_C)
-
-#define GPIO169_GPIO		PIN_CFG(169, GPIO)
-#define GPIO169_RF_PURn		PIN_CFG(169, ALT_A)
-#define GPIO169_LCDA_DE		PIN_CFG(169, ALT_B)
-#define GPIO169_USBSIM_PDC	PIN_CFG(169, ALT_C)
-
-#define GPIO170_GPIO		PIN_CFG(170, GPIO)
-#define GPIO170_MODEM_STATE	PIN_CFG(170, ALT_A)
-#define GPIO170_LCDA_VSO	PIN_CFG(170, ALT_B)
-#define GPIO170_KP_SKA1		PIN_CFG(170, ALT_C)
-
-#define GPIO171_GPIO		PIN_CFG(171, GPIO)
-#define GPIO171_MODEM_PWREN	PIN_CFG(171, ALT_A)
-#define GPIO171_LCDA_HSO	PIN_CFG(171, ALT_B)
-#define GPIO171_KP_SKB1		PIN_CFG(171, ALT_C)
-
-#define GPIO192_GPIO		PIN_CFG(192, GPIO)
-#define GPIO192_MSP2_SCK	PIN_CFG(192, ALT_A)
-
-#define GPIO193_GPIO		PIN_CFG(193, GPIO)
-#define GPIO193_MSP2_TXD	PIN_CFG(193, ALT_A)
-
-#define GPIO194_GPIO		PIN_CFG(194, GPIO)
-#define GPIO194_MSP2_TCK	PIN_CFG(194, ALT_A)
-
-#define GPIO195_GPIO		PIN_CFG(195, GPIO)
-#define GPIO195_MSP2_TFS	PIN_CFG(195, ALT_A)
-
-#define GPIO196_GPIO		PIN_CFG(196, GPIO)
-#define GPIO196_MSP2_RXD	PIN_CFG(196, ALT_A)
-
-#define GPIO197_GPIO		PIN_CFG(197, GPIO)
-#define GPIO197_MC4_DAT3	PIN_CFG_INPUT(197, ALT_A, PULLUP)
-
-#define GPIO198_GPIO		PIN_CFG(198, GPIO)
-#define GPIO198_MC4_DAT2	PIN_CFG_INPUT(198, ALT_A, PULLUP)
-
-#define GPIO199_GPIO		PIN_CFG(199, GPIO)
-#define GPIO199_MC4_DAT1	PIN_CFG_INPUT(199, ALT_A, PULLUP)
-
-#define GPIO200_GPIO		PIN_CFG(200, GPIO)
-#define GPIO200_MC4_DAT0	PIN_CFG_INPUT(200, ALT_A, PULLUP)
-
-#define GPIO201_GPIO		PIN_CFG(201, GPIO)
-#define GPIO201_MC4_CMD		PIN_CFG_INPUT(201, ALT_A, PULLUP)
-
-#define GPIO202_GPIO		PIN_CFG(202, GPIO)
-#define GPIO202_MC4_FBCLK	PIN_CFG_INPUT(202, ALT_A, PULLUP)
-#define GPIO202_PWL		PIN_CFG(202, ALT_B)
-#define GPIO202_MC4_RSTN	PIN_CFG(202, ALT_C)
-
-#define GPIO203_GPIO		PIN_CFG(203, GPIO)
-#define GPIO203_MC4_CLK		PIN_CFG_INPUT(203, ALT_A, PULLUP)
-
-#define GPIO204_GPIO		PIN_CFG(204, GPIO)
-#define GPIO204_MC4_DAT7	PIN_CFG_INPUT(204, ALT_A, PULLUP)
-
-#define GPIO205_GPIO		PIN_CFG(205, GPIO)
-#define GPIO205_MC4_DAT6	PIN_CFG_INPUT(205, ALT_A, PULLUP)
-
-#define GPIO206_GPIO		PIN_CFG(206, GPIO)
-#define GPIO206_MC4_DAT5	PIN_CFG_INPUT(206, ALT_A, PULLUP)
-
-#define GPIO207_GPIO		PIN_CFG(207, GPIO)
-#define GPIO207_MC4_DAT4	PIN_CFG_INPUT(207, ALT_A, PULLUP)
-
-#define GPIO208_GPIO		PIN_CFG(208, GPIO)
-#define GPIO208_MC1_CLK		PIN_CFG(208, ALT_A)
-
-#define GPIO209_GPIO		PIN_CFG(209, GPIO)
-#define GPIO209_MC1_FBCLK	PIN_CFG(209, ALT_A)
-#define GPIO209_SPI1_CLK	PIN_CFG(209, ALT_B)
-
-#define GPIO210_GPIO		PIN_CFG(210, GPIO)
-#define GPIO210_MC1_CMD		PIN_CFG(210, ALT_A)
-
-#define GPIO211_GPIO		PIN_CFG(211, GPIO)
-#define GPIO211_MC1_DAT0	PIN_CFG(211, ALT_A)
-
-#define GPIO212_GPIO		PIN_CFG(212, GPIO)
-#define GPIO212_MC1_DAT1	PIN_CFG(212, ALT_A)
-#define GPIO212_SPI1_FRM	PIN_CFG(212, ALT_B)
-
-#define GPIO213_GPIO		PIN_CFG(213, GPIO)
-#define GPIO213_MC1_DAT2	PIN_CFG(213, ALT_A)
-#define GPIO213_SPI1_TXD	PIN_CFG(213, ALT_B)
-
-#define GPIO214_GPIO		PIN_CFG(214, GPIO)
-#define GPIO214_MC1_DAT3	PIN_CFG(214, ALT_A)
-#define GPIO214_SPI1_RXD	PIN_CFG(214, ALT_B)
-
-#define GPIO215_GPIO		PIN_CFG(215, GPIO)
-#define GPIO215_MC1_CMDDIR	PIN_CFG(215, ALT_A)
-#define GPIO215_MC3_DAT2DIR	PIN_CFG(215, ALT_B)
-#define GPIO215_CLKOUT1		PIN_CFG(215, ALT_C)
-#define GPIO215_SPI2_TXD	PIN_CFG(215, ALT_C)
-
-#define GPIO216_GPIO		PIN_CFG(216, GPIO)
-#define GPIO216_MC1_DAT2DIR	PIN_CFG(216, ALT_A)
-#define GPIO216_MC3_CMDDIR	PIN_CFG(216, ALT_B)
-#define GPIO216_I2C3_SDA	PIN_CFG(216, ALT_C)
-#define GPIO216_SPI2_FRM	PIN_CFG(216, ALT_C)
-
-#define GPIO217_GPIO		PIN_CFG(217, GPIO)
-#define GPIO217_MC1_DAT0DIR	PIN_CFG(217, ALT_A)
-#define GPIO217_MC3_DAT31DIR	PIN_CFG(217, ALT_B)
-#define GPIO217_CLKOUT2		PIN_CFG(217, ALT_C)
-#define GPIO217_SPI2_CLK	PIN_CFG(217, ALT_C)
-
-#define GPIO218_GPIO		PIN_CFG(218, GPIO)
-#define GPIO218_MC1_DAT31DIR	PIN_CFG(218, ALT_A)
-#define GPIO218_MC3_DAT0DIR	PIN_CFG(218, ALT_B)
-#define GPIO218_I2C3_SCL	PIN_CFG(218, ALT_C)
-#define GPIO218_SPI2_RXD	PIN_CFG(218, ALT_C)
-
-#define GPIO219_GPIO		PIN_CFG(219, GPIO)
-#define GPIO219_HSIR_FLA0	PIN_CFG(219, ALT_A)
-#define GPIO219_MC3_CLK		PIN_CFG(219, ALT_B)
-
-#define GPIO220_GPIO		PIN_CFG(220, GPIO)
-#define GPIO220_HSIR_DAT0	PIN_CFG(220, ALT_A)
-#define GPIO220_MC3_FBCLK	PIN_CFG(220, ALT_B)
-#define GPIO220_SPI0_CLK	PIN_CFG(220, ALT_C)
-
-#define GPIO221_GPIO		PIN_CFG(221, GPIO)
-#define GPIO221_HSIR_RDY0	PIN_CFG(221, ALT_A)
-#define GPIO221_MC3_CMD		PIN_CFG(221, ALT_B)
-
-#define GPIO222_GPIO		PIN_CFG(222, GPIO)
-#define GPIO222_HSIT_FLA0	PIN_CFG(222, ALT_A)
-#define GPIO222_MC3_DAT0	PIN_CFG(222, ALT_B)
-
-#define GPIO223_GPIO		PIN_CFG(223, GPIO)
-#define GPIO223_HSIT_DAT0	PIN_CFG(223, ALT_A)
-#define GPIO223_MC3_DAT1	PIN_CFG(223, ALT_B)
-#define GPIO223_SPI0_FRM	PIN_CFG(223, ALT_C)
-
-#define GPIO224_GPIO		PIN_CFG(224, GPIO)
-#define GPIO224_HSIT_RDY0	PIN_CFG(224, ALT_A)
-#define GPIO224_MC3_DAT2	PIN_CFG(224, ALT_B)
-#define GPIO224_SPI0_TXD	PIN_CFG(224, ALT_C)
-
-#define GPIO225_GPIO		PIN_CFG(225, GPIO)
-#define GPIO225_HSIT_CAWAKE0	PIN_CFG(225, ALT_A)
-#define GPIO225_MC3_DAT3	PIN_CFG(225, ALT_B)
-#define GPIO225_SPI0_RXD	PIN_CFG(225, ALT_C)
-
-#define GPIO226_GPIO		PIN_CFG(226, GPIO)
-#define GPIO226_HSIT_ACWAKE0	PIN_CFG(226, ALT_A)
-#define GPIO226_PWL		PIN_CFG(226, ALT_B)
-#define GPIO226_USBSIM_PDC	PIN_CFG(226, ALT_C)
-
-#define GPIO227_GPIO		PIN_CFG(227, GPIO)
-#define GPIO227_CLKOUT1		PIN_CFG(227, ALT_A)
-
-#define GPIO228_GPIO		PIN_CFG(228, GPIO)
-#define GPIO228_CLKOUT2		PIN_CFG(228, ALT_A)
-
-#define GPIO229_GPIO		PIN_CFG(229, GPIO)
-#define GPIO229_CLKOUT1		PIN_CFG(229, ALT_A)
-#define GPIO229_PWL		PIN_CFG(229, ALT_B)
-#define GPIO229_I2C3_SDA	PIN_CFG(229, ALT_C)
-
-#define GPIO230_GPIO		PIN_CFG(230, GPIO)
-#define GPIO230_CLKOUT2		PIN_CFG(230, ALT_A)
-#define GPIO230_PWL		PIN_CFG(230, ALT_B)
-#define GPIO230_I2C3_SCL	PIN_CFG(230, ALT_C)
-
-#define GPIO256_GPIO		PIN_CFG(256, GPIO)
-#define GPIO256_USB_NXT		PIN_CFG(256, ALT_A)
-
-#define GPIO257_GPIO		PIN_CFG(257, GPIO)
-#define GPIO257_USB_STP		PIN_CFG(257, ALT_A)
-
-#define GPIO258_GPIO		PIN_CFG(258, GPIO)
-#define GPIO258_USB_XCLK	PIN_CFG(258, ALT_A)
-#define GPIO258_NONE		PIN_CFG(258, ALT_B)
-#define GPIO258_DDR_TRIG	PIN_CFG(258, ALT_C)
-
-#define GPIO259_GPIO		PIN_CFG(259, GPIO)
-#define GPIO259_USB_DIR		PIN_CFG(259, ALT_A)
-
-#define GPIO260_GPIO		PIN_CFG(260, GPIO)
-#define GPIO260_USB_DAT7	PIN_CFG(260, ALT_A)
-
-#define GPIO261_GPIO		PIN_CFG(261, GPIO)
-#define GPIO261_USB_DAT6	PIN_CFG(261, ALT_A)
-
-#define GPIO262_GPIO		PIN_CFG(262, GPIO)
-#define GPIO262_USB_DAT5	PIN_CFG(262, ALT_A)
-
-#define GPIO263_GPIO		PIN_CFG(263, GPIO)
-#define GPIO263_USB_DAT4	PIN_CFG(263, ALT_A)
-
-#define GPIO264_GPIO		PIN_CFG(264, GPIO)
-#define GPIO264_USB_DAT3	PIN_CFG(264, ALT_A)
-
-#define GPIO265_GPIO		PIN_CFG(265, GPIO)
-#define GPIO265_USB_DAT2	PIN_CFG(265, ALT_A)
-
-#define GPIO266_GPIO		PIN_CFG(266, GPIO)
-#define GPIO266_USB_DAT1	PIN_CFG(266, ALT_A)
-
-#define GPIO267_GPIO		PIN_CFG(267, GPIO)
-#define GPIO267_USB_DAT0	PIN_CFG(267, ALT_A)
-
-#endif
diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h
index cad3ca8..bdb3564 100644
--- a/arch/arm/mach-ux500/setup.h
+++ b/arch/arm/mach-ux500/setup.h
@@ -11,17 +11,19 @@
 #ifndef __ASM_ARCH_SETUP_H
 #define __ASM_ARCH_SETUP_H
 
+#include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <linux/init.h>
 #include <linux/mfd/abx500/ab8500.h>
 
+void ux500_restart(enum reboot_mode mode, const char *cmd);
+
 void __init ux500_map_io(void);
 extern void __init u8500_map_io(void);
 
 extern struct device * __init u8500_init_devices(void);
 
 extern void __init ux500_init_irq(void);
-extern void __init ux500_init_late(void);
 
 extern struct device *ux500_soc_device_init(const char *soc_id);
 
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index b6bd0ef..05a4ff7 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -97,8 +97,8 @@ dt_fail:
 	 * sched_clock with higher rating then MTU since is always-on.
 	 *
 	 */
-
-	nmdk_timer_init(mtu_timer_base, IRQ_MTU0);
+	if (!of_have_populated_dt())
+		nmdk_timer_init(mtu_timer_base, IRQ_MTU0);
 	clksrc_dbx500_prcmu_init(prcmu_timer_base);
 	ux500_twd_init();
 }
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
deleted file mode 100644
index b7bd8d3..0000000
--- a/arch/arm/mach-ux500/usb.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-#include <linux/platform_device.h>
-#include <linux/usb/musb.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_data/usb-musb-ux500.h>
-#include <linux/platform_data/dma-ste-dma40.h>
-
-#include "db8500-regs.h"
-
-#define MUSB_DMA40_RX_CH { \
-		.mode = STEDMA40_MODE_LOGICAL, \
-		.dir = DMA_DEV_TO_MEM, \
-	}
-
-#define MUSB_DMA40_TX_CH { \
-		.mode = STEDMA40_MODE_LOGICAL, \
-		.dir = DMA_MEM_TO_DEV, \
-	}
-
-static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS]
-	= {
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH
-};
-
-static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS]
-	= {
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-};
-
-static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = {
-	&musb_dma_rx_ch[0],
-	&musb_dma_rx_ch[1],
-	&musb_dma_rx_ch[2],
-	&musb_dma_rx_ch[3],
-	&musb_dma_rx_ch[4],
-	&musb_dma_rx_ch[5],
-	&musb_dma_rx_ch[6],
-	&musb_dma_rx_ch[7]
-};
-
-static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = {
-	&musb_dma_tx_ch[0],
-	&musb_dma_tx_ch[1],
-	&musb_dma_tx_ch[2],
-	&musb_dma_tx_ch[3],
-	&musb_dma_tx_ch[4],
-	&musb_dma_tx_ch[5],
-	&musb_dma_tx_ch[6],
-	&musb_dma_tx_ch[7]
-};
-
-static struct ux500_musb_board_data musb_board_data = {
-	.dma_rx_param_array = ux500_dma_rx_param_array,
-	.dma_tx_param_array = ux500_dma_tx_param_array,
-	.dma_filter = stedma40_filter,
-};
-
-static struct musb_hdrc_platform_data musb_platform_data = {
-	.mode = MUSB_OTG,
-	.board_data = &musb_board_data,
-};
-
-static struct resource usb_resources[] = {
-	[0] = {
-		.name	= "usb-mem",
-		.flags	=  IORESOURCE_MEM,
-	},
-
-	[1] = {
-		.name   = "mc", /* hard-coded in musb */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device ux500_musb_device = {
-	.name = "musb-ux500",
-	.id = 0,
-	.dev = {
-		.platform_data = &musb_platform_data,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources = ARRAY_SIZE(usb_resources),
-	.resource = usb_resources,
-};
-
-static inline void ux500_usb_dma_update_rx_ch_config(int *dev_type)
-{
-	u32 idx;
-
-	for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++)
-		musb_dma_rx_ch[idx].dev_type = dev_type[idx];
-}
-
-static inline void ux500_usb_dma_update_tx_ch_config(int *dev_type)
-{
-	u32 idx;
-
-	for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++)
-		musb_dma_tx_ch[idx].dev_type = dev_type[idx];
-}
-
-void ux500_add_usb(struct device *parent, resource_size_t base, int irq,
-		   int *dma_rx_cfg, int *dma_tx_cfg)
-{
-	ux500_musb_device.resource[0].start = base;
-	ux500_musb_device.resource[0].end = base + SZ_64K - 1;
-	ux500_musb_device.resource[1].start = irq;
-	ux500_musb_device.resource[1].end = irq;
-
-	ux500_usb_dma_update_rx_ch_config(dma_rx_cfg);
-	ux500_usb_dma_update_tx_ch_config(dma_tx_cfg);
-
-	ux500_musb_device.dev.parent = parent;
-
-	platform_device_register(&ux500_musb_device);
-}
diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S
deleted file mode 100644
index d0fbd7f..0000000
--- a/arch/arm/mach-versatile/include/mach/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-versatile/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp,      #0x001F0000
-		orr	\rp, \rp, #0x00001000
-		orr	\rv, \rp, #0xf1000000	@ virtual base
-		orr	\rp, \rp,  #0x10000000	@ physical base
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-versatile/include/mach/platform.h b/arch/arm/mach-versatile/include/mach/platform.h
index ec08740..6f938cc 100644
--- a/arch/arm/mach-versatile/include/mach/platform.h
+++ b/arch/arm/mach-versatile/include/mach/platform.h
@@ -231,12 +231,14 @@
 /* PCI space */
 #define VERSATILE_PCI_BASE             0x41000000	/* PCI Interface */
 #define VERSATILE_PCI_CFG_BASE	       0x42000000
+#define VERSATILE_PCI_IO_BASE          0x43000000
 #define VERSATILE_PCI_MEM_BASE0        0x44000000
 #define VERSATILE_PCI_MEM_BASE1        0x50000000
 #define VERSATILE_PCI_MEM_BASE2        0x60000000
 /* Sizes of above maps */
 #define VERSATILE_PCI_BASE_SIZE	       0x01000000
 #define VERSATILE_PCI_CFG_BASE_SIZE    0x02000000
+#define VERSATILE_PCI_IO_BASE_SIZE     0x01000000
 #define VERSATILE_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
 #define VERSATILE_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
 #define VERSATILE_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index e92e5e0..c97be4e 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -43,9 +43,9 @@
 #define PCI_IMAP0		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x0)
 #define PCI_IMAP1		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x4)
 #define PCI_IMAP2		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x8)
-#define PCI_SMAP0		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x10)
-#define PCI_SMAP1		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x14)
-#define PCI_SMAP2		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x18)
+#define PCI_SMAP0		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x14)
+#define PCI_SMAP1		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x18)
+#define PCI_SMAP2		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x1c)
 #define PCI_SELFID		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0xc)
 
 #define DEVICE_ID_OFFSET		0x00
@@ -170,8 +170,8 @@ static struct pci_ops pci_versatile_ops = {
 	.write	= versatile_write_config,
 };
 
-static struct resource io_mem = {
-	.name	= "PCI I/O space",
+static struct resource unused_mem = {
+	.name	= "PCI unused",
 	.start	= VERSATILE_PCI_MEM_BASE0,
 	.end	= VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1,
 	.flags	= IORESOURCE_MEM,
@@ -195,9 +195,9 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys)
 {
 	int ret = 0;
 
-	ret = request_resource(&iomem_resource, &io_mem);
+	ret = request_resource(&iomem_resource, &unused_mem);
 	if (ret) {
-		printk(KERN_ERR "PCI: unable to allocate I/O "
+		printk(KERN_ERR "PCI: unable to allocate unused "
 		       "memory region (%d)\n", ret);
 		goto out;
 	}
@@ -205,7 +205,7 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys)
 	if (ret) {
 		printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
 		       "memory region (%d)\n", ret);
-		goto release_io_mem;
+		goto release_unused_mem;
 	}
 	ret = request_resource(&iomem_resource, &pre_mem);
 	if (ret) {
@@ -225,8 +225,8 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys)
 
  release_non_mem:
 	release_resource(&non_mem);
- release_io_mem:
-	release_resource(&io_mem);
+ release_unused_mem:
+	release_resource(&unused_mem);
  out:
 	return ret;
 }
@@ -246,7 +246,7 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
 		goto out;
 	}
 
-	ret = pci_ioremap_io(0, VERSATILE_PCI_MEM_BASE0);
+	ret = pci_ioremap_io(0, VERSATILE_PCI_IO_BASE);
 	if (ret)
 		goto out;
 
@@ -295,6 +295,19 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
 	__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_2);
 
 	/*
+	 * For many years the kernel and QEMU were symbiotically buggy
+	 * in that they both assumed the same broken IRQ mapping.
+	 * QEMU therefore attempts to auto-detect old broken kernels
+	 * so that they still work on newer QEMU as they did on old
+	 * QEMU. Since we now use the correct (ie matching-hardware)
+	 * IRQ mapping we write a definitely different value to a
+	 * PCI_INTERRUPT_LINE register to tell QEMU that we expect
+	 * real hardware behaviour and it need not be backwards
+	 * compatible for us. This write is harmless on real hardware.
+	 */
+	__raw_writel(0, VERSATILE_PCI_VIRT_BASE+PCI_INTERRUPT_LINE);
+
+	/*
 	 * Do not to map Versatile FPGA PCI device into memory space
 	 */
 	pci_slot_ignore |= (1 << myslot);
@@ -327,13 +340,13 @@ static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq;
 
-	/* slot,  pin,	irq
-	 *  24     1     IRQ_SIC_PCI0
-	 *  25     1     IRQ_SIC_PCI1
-	 *  26     1     IRQ_SIC_PCI2
-	 *  27     1     IRQ_SIC_PCI3
+	/*
+	 * Slot	INTA	INTB	INTC	INTD
+	 * 31	PCI1	PCI2	PCI3	PCI0
+	 * 30	PCI0	PCI1	PCI2	PCI3
+	 * 29	PCI3	PCI0	PCI1	PCI2
 	 */
-	irq = IRQ_SIC_PCI0 + ((slot - 24 + pin - 1) & 3);
+	irq = IRQ_SIC_PCI0 + ((slot + 2 + pin - 1) & 3);
 
 	return irq;
 }
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index b8bbabe..d7e7422 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -4,14 +4,12 @@ config ARCH_VEXPRESS
 	select ARM_AMBA
 	select ARM_GIC
 	select ARM_TIMER_SP804
-	select CLKDEV_LOOKUP
 	select COMMON_CLK
 	select COMMON_CLK_VERSATILE
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
-	select HAVE_CLK
+	select HAVE_ARM_TWD if SMP
 	select HAVE_PATA_PLATFORM
 	select HAVE_SMP
 	select ICST
@@ -66,4 +64,12 @@ config ARCH_VEXPRESS_DCSCB
 	  This is needed to provide CPU and cluster power management
 	  on RTSM implementing big.LITTLE.
 
+config ARCH_VEXPRESS_TC2_PM
+	bool "Versatile Express TC2 power management"
+	depends on MCPM
+	select ARM_CCI
+	help
+	  Support for CPU and cluster power management on Versatile Express
+	  with a TC2 (A15x2 A7x3) big.LITTLE core tile.
+
 endmenu
diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile
index 48ba89a..505e64a 100644
--- a/arch/arm/mach-vexpress/Makefile
+++ b/arch/arm/mach-vexpress/Makefile
@@ -7,5 +7,8 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
 obj-y					:= v2m.o
 obj-$(CONFIG_ARCH_VEXPRESS_CA9X4)	+= ct-ca9x4.o
 obj-$(CONFIG_ARCH_VEXPRESS_DCSCB)	+= dcscb.o	dcscb_setup.o
+CFLAGS_dcscb.o				+= -march=armv7-a
+obj-$(CONFIG_ARCH_VEXPRESS_TC2_PM)	+= tc2_pm.o spc.o
+CFLAGS_tc2_pm.o				+= -march=armv7-a
 obj-$(CONFIG_SMP)			+= platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-vexpress/dcscb.c
index 16d57a8..3a6384c 100644
--- a/arch/arm/mach-vexpress/dcscb.c
+++ b/arch/arm/mach-vexpress/dcscb.c
@@ -136,14 +136,35 @@ static void dcscb_power_down(void)
 		/*
 		 * Flush all cache levels for this cluster.
 		 *
-		 * A15/A7 can hit in the cache with SCTLR.C=0, so we don't need
-		 * a preliminary flush here for those CPUs.  At least, that's
-		 * the theory -- without the extra flush, Linux explodes on
-		 * RTSM (to be investigated).
+		 * To do so we do:
+		 * - Clear the SCTLR.C bit to prevent further cache allocations
+		 * - Flush the whole cache
+		 * - Clear the ACTLR "SMP" bit to disable local coherency
+		 *
+		 * Let's do it in the safest possible way i.e. with
+		 * no memory access within the following sequence
+		 * including to the stack.
+		 *
+		 * Note: fp is preserved to the stack explicitly prior doing
+		 * this since adding it to the clobber list is incompatible
+		 * with having CONFIG_FRAME_POINTER=y.
 		 */
-		flush_cache_all();
-		set_cr(get_cr() & ~CR_C);
-		flush_cache_all();
+		asm volatile(
+		"str	fp, [sp, #-4]! \n\t"
+		"mrc	p15, 0, r0, c1, c0, 0	@ get CR \n\t"
+		"bic	r0, r0, #"__stringify(CR_C)" \n\t"
+		"mcr	p15, 0, r0, c1, c0, 0	@ set CR \n\t"
+		"isb	\n\t"
+		"bl	v7_flush_dcache_all \n\t"
+		"clrex	\n\t"
+		"mrc	p15, 0, r0, c1, c0, 1	@ get AUXCR \n\t"
+		"bic	r0, r0, #(1 << 6)	@ disable local coherency \n\t"
+		"mcr	p15, 0, r0, c1, c0, 1	@ set AUXCR \n\t"
+		"isb	\n\t"
+		"dsb	\n\t"
+		"ldr	fp, [sp], #4"
+		: : : "r0","r1","r2","r3","r4","r5","r6","r7",
+		      "r9","r10","lr","memory");
 
 		/*
 		 * This is a harmless no-op.  On platforms with a real
@@ -152,9 +173,6 @@ static void dcscb_power_down(void)
 		 */
 		outer_flush_all();
 
-		/* Disable local coherency by clearing the ACTLR "SMP" bit: */
-		set_auxcr(get_auxcr() & ~(1 << 6));
-
 		/*
 		 * Disable cluster-level coherency by masking
 		 * incoming snoops and DVM messages:
@@ -167,18 +185,24 @@ static void dcscb_power_down(void)
 
 		/*
 		 * Flush the local CPU cache.
-		 *
-		 * A15/A7 can hit in the cache with SCTLR.C=0, so we don't need
-		 * a preliminary flush here for those CPUs.  At least, that's
-		 * the theory -- without the extra flush, Linux explodes on
-		 * RTSM (to be investigated).
+		 * Let's do it in the safest possible way as above.
 		 */
-		flush_cache_louis();
-		set_cr(get_cr() & ~CR_C);
-		flush_cache_louis();
-
-		/* Disable local coherency by clearing the ACTLR "SMP" bit: */
-		set_auxcr(get_auxcr() & ~(1 << 6));
+		asm volatile(
+		"str	fp, [sp, #-4]! \n\t"
+		"mrc	p15, 0, r0, c1, c0, 0	@ get CR \n\t"
+		"bic	r0, r0, #"__stringify(CR_C)" \n\t"
+		"mcr	p15, 0, r0, c1, c0, 0	@ set CR \n\t"
+		"isb	\n\t"
+		"bl	v7_flush_dcache_louis \n\t"
+		"clrex	\n\t"
+		"mrc	p15, 0, r0, c1, c0, 1	@ get AUXCR \n\t"
+		"bic	r0, r0, #(1 << 6)	@ disable local coherency \n\t"
+		"mcr	p15, 0, r0, c1, c0, 1	@ set AUXCR \n\t"
+		"isb	\n\t"
+		"dsb	\n\t"
+		"ldr	fp, [sp], #4"
+		: : : "r0","r1","r2","r3","r4","r5","r6","r7",
+		      "r9","r10","lr","memory");
 	}
 
 	__mcpm_cpu_down(cpu, cluster);
diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c
new file mode 100644
index 0000000..eefb029
--- /dev/null
+++ b/arch/arm/mach-vexpress/spc.c
@@ -0,0 +1,180 @@
+/*
+ * Versatile Express Serial Power Controller (SPC) support
+ *
+ * Copyright (C) 2013 ARM Ltd.
+ *
+ * Authors: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
+ *          Achin Gupta           <achin.gupta@arm.com>
+ *          Lorenzo Pieralisi     <lorenzo.pieralisi@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#include <asm/cacheflush.h>
+
+#define SPCLOG "vexpress-spc: "
+
+/* SPC wake-up IRQs status and mask */
+#define WAKE_INT_MASK		0x24
+#define WAKE_INT_RAW		0x28
+#define WAKE_INT_STAT		0x2c
+/* SPC power down registers */
+#define A15_PWRDN_EN		0x30
+#define A7_PWRDN_EN		0x34
+/* SPC per-CPU mailboxes */
+#define A15_BX_ADDR0		0x68
+#define A7_BX_ADDR0		0x78
+
+/* wake-up interrupt masks */
+#define GBL_WAKEUP_INT_MSK	(0x3 << 10)
+
+/* TC2 static dual-cluster configuration */
+#define MAX_CLUSTERS		2
+
+struct ve_spc_drvdata {
+	void __iomem *baseaddr;
+	/*
+	 * A15s cluster identifier
+	 * It corresponds to A15 processors MPIDR[15:8] bitfield
+	 */
+	u32 a15_clusid;
+};
+
+static struct ve_spc_drvdata *info;
+
+static inline bool cluster_is_a15(u32 cluster)
+{
+	return cluster == info->a15_clusid;
+}
+
+/**
+ * ve_spc_global_wakeup_irq()
+ *
+ * Function to set/clear global wakeup IRQs. Not protected by locking since
+ * it might be used in code paths where normal cacheable locks are not
+ * working. Locking must be provided by the caller to ensure atomicity.
+ *
+ * @set: if true, global wake-up IRQs are set, if false they are cleared
+ */
+void ve_spc_global_wakeup_irq(bool set)
+{
+	u32 reg;
+
+	reg = readl_relaxed(info->baseaddr + WAKE_INT_MASK);
+
+	if (set)
+		reg |= GBL_WAKEUP_INT_MSK;
+	else
+		reg &= ~GBL_WAKEUP_INT_MSK;
+
+	writel_relaxed(reg, info->baseaddr + WAKE_INT_MASK);
+}
+
+/**
+ * ve_spc_cpu_wakeup_irq()
+ *
+ * Function to set/clear per-CPU wake-up IRQs. Not protected by locking since
+ * it might be used in code paths where normal cacheable locks are not
+ * working. Locking must be provided by the caller to ensure atomicity.
+ *
+ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
+ * @cpu: mpidr[7:0] bitfield describing cpu affinity level
+ * @set: if true, wake-up IRQs are set, if false they are cleared
+ */
+void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set)
+{
+	u32 mask, reg;
+
+	if (cluster >= MAX_CLUSTERS)
+		return;
+
+	mask = 1 << cpu;
+
+	if (!cluster_is_a15(cluster))
+		mask <<= 4;
+
+	reg = readl_relaxed(info->baseaddr + WAKE_INT_MASK);
+
+	if (set)
+		reg |= mask;
+	else
+		reg &= ~mask;
+
+	writel_relaxed(reg, info->baseaddr + WAKE_INT_MASK);
+}
+
+/**
+ * ve_spc_set_resume_addr() - set the jump address used for warm boot
+ *
+ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
+ * @cpu: mpidr[7:0] bitfield describing cpu affinity level
+ * @addr: physical resume address
+ */
+void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr)
+{
+	void __iomem *baseaddr;
+
+	if (cluster >= MAX_CLUSTERS)
+		return;
+
+	if (cluster_is_a15(cluster))
+		baseaddr = info->baseaddr + A15_BX_ADDR0 + (cpu << 2);
+	else
+		baseaddr = info->baseaddr + A7_BX_ADDR0 + (cpu << 2);
+
+	writel_relaxed(addr, baseaddr);
+}
+
+/**
+ * ve_spc_powerdown()
+ *
+ * Function to enable/disable cluster powerdown. Not protected by locking
+ * since it might be used in code paths where normal cacheable locks are not
+ * working. Locking must be provided by the caller to ensure atomicity.
+ *
+ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
+ * @enable: if true enables powerdown, if false disables it
+ */
+void ve_spc_powerdown(u32 cluster, bool enable)
+{
+	u32 pwdrn_reg;
+
+	if (cluster >= MAX_CLUSTERS)
+		return;
+
+	pwdrn_reg = cluster_is_a15(cluster) ? A15_PWRDN_EN : A7_PWRDN_EN;
+	writel_relaxed(enable, info->baseaddr + pwdrn_reg);
+}
+
+int __init ve_spc_init(void __iomem *baseaddr, u32 a15_clusid)
+{
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info) {
+		pr_err(SPCLOG "unable to allocate mem\n");
+		return -ENOMEM;
+	}
+
+	info->baseaddr = baseaddr;
+	info->a15_clusid = a15_clusid;
+
+	/*
+	 * Multi-cluster systems may need this data when non-coherent, during
+	 * cluster power-up/power-down. Make sure driver info reaches main
+	 * memory.
+	 */
+	sync_cache_w(info);
+	sync_cache_w(&info);
+
+	return 0;
+}
diff --git a/arch/arm/mach-vexpress/spc.h b/arch/arm/mach-vexpress/spc.h
new file mode 100644
index 0000000..5f7e4a4
--- /dev/null
+++ b/arch/arm/mach-vexpress/spc.h
@@ -0,0 +1,24 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2012 ARM Limited
+ */
+
+
+#ifndef __SPC_H_
+#define __SPC_H_
+
+int __init ve_spc_init(void __iomem *base, u32 a15_clusid);
+void ve_spc_global_wakeup_irq(bool set);
+void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set);
+void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr);
+void ve_spc_powerdown(u32 cluster, bool enable);
+
+#endif
diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c
new file mode 100644
index 0000000..e6eb481
--- /dev/null
+++ b/arch/arm/mach-vexpress/tc2_pm.c
@@ -0,0 +1,363 @@
+/*
+ * arch/arm/mach-vexpress/tc2_pm.c - TC2 power management support
+ *
+ * Created by:	Nicolas Pitre, October 2012
+ * Copyright:	(C) 2012-2013  Linaro Limited
+ *
+ * Some portions of this file were originally written by Achin Gupta
+ * Copyright:   (C) 2012  ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/irqchip/arm-gic.h>
+
+#include <asm/mcpm.h>
+#include <asm/proc-fns.h>
+#include <asm/cacheflush.h>
+#include <asm/cputype.h>
+#include <asm/cp15.h>
+
+#include <linux/arm-cci.h>
+
+#include "spc.h"
+
+/* SCC conf registers */
+#define A15_CONF		0x400
+#define A7_CONF			0x500
+#define SYS_INFO		0x700
+#define SPC_BASE		0xb00
+
+/*
+ * We can't use regular spinlocks. In the switcher case, it is possible
+ * for an outbound CPU to call power_down() after its inbound counterpart
+ * is already live using the same logical CPU number which trips lockdep
+ * debugging.
+ */
+static arch_spinlock_t tc2_pm_lock = __ARCH_SPIN_LOCK_UNLOCKED;
+
+#define TC2_CLUSTERS			2
+#define TC2_MAX_CPUS_PER_CLUSTER	3
+
+static unsigned int tc2_nr_cpus[TC2_CLUSTERS];
+
+/* Keep per-cpu usage count to cope with unordered up/down requests */
+static int tc2_pm_use_count[TC2_MAX_CPUS_PER_CLUSTER][TC2_CLUSTERS];
+
+#define tc2_cluster_unused(cluster) \
+	(!tc2_pm_use_count[0][cluster] && \
+	 !tc2_pm_use_count[1][cluster] && \
+	 !tc2_pm_use_count[2][cluster])
+
+static int tc2_pm_power_up(unsigned int cpu, unsigned int cluster)
+{
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	if (cluster >= TC2_CLUSTERS || cpu >= tc2_nr_cpus[cluster])
+		return -EINVAL;
+
+	/*
+	 * Since this is called with IRQs enabled, and no arch_spin_lock_irq
+	 * variant exists, we need to disable IRQs manually here.
+	 */
+	local_irq_disable();
+	arch_spin_lock(&tc2_pm_lock);
+
+	if (tc2_cluster_unused(cluster))
+		ve_spc_powerdown(cluster, false);
+
+	tc2_pm_use_count[cpu][cluster]++;
+	if (tc2_pm_use_count[cpu][cluster] == 1) {
+		ve_spc_set_resume_addr(cluster, cpu,
+				       virt_to_phys(mcpm_entry_point));
+		ve_spc_cpu_wakeup_irq(cluster, cpu, true);
+	} else if (tc2_pm_use_count[cpu][cluster] != 2) {
+		/*
+		 * The only possible values are:
+		 * 0 = CPU down
+		 * 1 = CPU (still) up
+		 * 2 = CPU requested to be up before it had a chance
+		 *     to actually make itself down.
+		 * Any other value is a bug.
+		 */
+		BUG();
+	}
+
+	arch_spin_unlock(&tc2_pm_lock);
+	local_irq_enable();
+
+	return 0;
+}
+
+static void tc2_pm_down(u64 residency)
+{
+	unsigned int mpidr, cpu, cluster;
+	bool last_man = false, skip_wfi = false;
+
+	mpidr = read_cpuid_mpidr();
+	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER);
+
+	__mcpm_cpu_going_down(cpu, cluster);
+
+	arch_spin_lock(&tc2_pm_lock);
+	BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP);
+	tc2_pm_use_count[cpu][cluster]--;
+	if (tc2_pm_use_count[cpu][cluster] == 0) {
+		ve_spc_cpu_wakeup_irq(cluster, cpu, true);
+		if (tc2_cluster_unused(cluster)) {
+			ve_spc_powerdown(cluster, true);
+			ve_spc_global_wakeup_irq(true);
+			last_man = true;
+		}
+	} else if (tc2_pm_use_count[cpu][cluster] == 1) {
+		/*
+		 * A power_up request went ahead of us.
+		 * Even if we do not want to shut this CPU down,
+		 * the caller expects a certain state as if the WFI
+		 * was aborted.  So let's continue with cache cleaning.
+		 */
+		skip_wfi = true;
+	} else
+		BUG();
+
+	/*
+	 * If the CPU is committed to power down, make sure
+	 * the power controller will be in charge of waking it
+	 * up upon IRQ, ie IRQ lines are cut from GIC CPU IF
+	 * to the CPU by disabling the GIC CPU IF to prevent wfi
+	 * from completing execution behind power controller back
+	 */
+	if (!skip_wfi)
+		gic_cpu_if_down();
+
+	if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
+		arch_spin_unlock(&tc2_pm_lock);
+
+		if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A15) {
+			/*
+			 * On the Cortex-A15 we need to disable
+			 * L2 prefetching before flushing the cache.
+			 */
+			asm volatile(
+			"mcr	p15, 1, %0, c15, c0, 3 \n\t"
+			"isb	\n\t"
+			"dsb	"
+			: : "r" (0x400) );
+		}
+
+		/*
+		 * We need to disable and flush the whole (L1 and L2) cache.
+		 * Let's do it in the safest possible way i.e. with
+		 * no memory access within the following sequence
+		 * including the stack.
+		 *
+		 * Note: fp is preserved to the stack explicitly prior doing
+		 * this since adding it to the clobber list is incompatible
+		 * with having CONFIG_FRAME_POINTER=y.
+		 */
+		asm volatile(
+		"str	fp, [sp, #-4]! \n\t"
+		"mrc	p15, 0, r0, c1, c0, 0	@ get CR \n\t"
+		"bic	r0, r0, #"__stringify(CR_C)" \n\t"
+		"mcr	p15, 0, r0, c1, c0, 0	@ set CR \n\t"
+		"isb	\n\t"
+		"bl	v7_flush_dcache_all \n\t"
+		"clrex	\n\t"
+		"mrc	p15, 0, r0, c1, c0, 1	@ get AUXCR \n\t"
+		"bic	r0, r0, #(1 << 6)	@ disable local coherency \n\t"
+		"mcr	p15, 0, r0, c1, c0, 1	@ set AUXCR \n\t"
+		"isb	\n\t"
+		"dsb	\n\t"
+		"ldr	fp, [sp], #4"
+		: : : "r0","r1","r2","r3","r4","r5","r6","r7",
+		      "r9","r10","lr","memory");
+
+		cci_disable_port_by_cpu(mpidr);
+
+		__mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN);
+	} else {
+		/*
+		 * If last man then undo any setup done previously.
+		 */
+		if (last_man) {
+			ve_spc_powerdown(cluster, false);
+			ve_spc_global_wakeup_irq(false);
+		}
+
+		arch_spin_unlock(&tc2_pm_lock);
+
+		/*
+		 * We need to disable and flush only the L1 cache.
+		 * Let's do it in the safest possible way as above.
+		 */
+		asm volatile(
+		"str	fp, [sp, #-4]! \n\t"
+		"mrc	p15, 0, r0, c1, c0, 0	@ get CR \n\t"
+		"bic	r0, r0, #"__stringify(CR_C)" \n\t"
+		"mcr	p15, 0, r0, c1, c0, 0	@ set CR \n\t"
+		"isb	\n\t"
+		"bl	v7_flush_dcache_louis \n\t"
+		"clrex	\n\t"
+		"mrc	p15, 0, r0, c1, c0, 1	@ get AUXCR \n\t"
+		"bic	r0, r0, #(1 << 6)	@ disable local coherency \n\t"
+		"mcr	p15, 0, r0, c1, c0, 1	@ set AUXCR \n\t"
+		"isb	\n\t"
+		"dsb	\n\t"
+		"ldr	fp, [sp], #4"
+		: : : "r0","r1","r2","r3","r4","r5","r6","r7",
+		      "r9","r10","lr","memory");
+	}
+
+	__mcpm_cpu_down(cpu, cluster);
+
+	/* Now we are prepared for power-down, do it: */
+	if (!skip_wfi)
+		wfi();
+
+	/* Not dead at this point?  Let our caller cope. */
+}
+
+static void tc2_pm_power_down(void)
+{
+	tc2_pm_down(0);
+}
+
+static void tc2_pm_suspend(u64 residency)
+{
+	unsigned int mpidr, cpu, cluster;
+
+	mpidr = read_cpuid_mpidr();
+	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+	ve_spc_set_resume_addr(cluster, cpu, virt_to_phys(mcpm_entry_point));
+	tc2_pm_down(residency);
+}
+
+static void tc2_pm_powered_up(void)
+{
+	unsigned int mpidr, cpu, cluster;
+	unsigned long flags;
+
+	mpidr = read_cpuid_mpidr();
+	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER);
+
+	local_irq_save(flags);
+	arch_spin_lock(&tc2_pm_lock);
+
+	if (tc2_cluster_unused(cluster)) {
+		ve_spc_powerdown(cluster, false);
+		ve_spc_global_wakeup_irq(false);
+	}
+
+	if (!tc2_pm_use_count[cpu][cluster])
+		tc2_pm_use_count[cpu][cluster] = 1;
+
+	ve_spc_cpu_wakeup_irq(cluster, cpu, false);
+	ve_spc_set_resume_addr(cluster, cpu, 0);
+
+	arch_spin_unlock(&tc2_pm_lock);
+	local_irq_restore(flags);
+}
+
+static const struct mcpm_platform_ops tc2_pm_power_ops = {
+	.power_up	= tc2_pm_power_up,
+	.power_down	= tc2_pm_power_down,
+	.suspend	= tc2_pm_suspend,
+	.powered_up	= tc2_pm_powered_up,
+};
+
+static bool __init tc2_pm_usage_count_init(void)
+{
+	unsigned int mpidr, cpu, cluster;
+
+	mpidr = read_cpuid_mpidr();
+	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	if (cluster >= TC2_CLUSTERS || cpu >= tc2_nr_cpus[cluster]) {
+		pr_err("%s: boot CPU is out of bound!\n", __func__);
+		return false;
+	}
+	tc2_pm_use_count[cpu][cluster] = 1;
+	return true;
+}
+
+/*
+ * Enable cluster-level coherency, in preparation for turning on the MMU.
+ */
+static void __naked tc2_pm_power_up_setup(unsigned int affinity_level)
+{
+	asm volatile (" \n"
+"	cmp	r0, #1 \n"
+"	bxne	lr \n"
+"	b	cci_enable_port_for_self ");
+}
+
+static int __init tc2_pm_init(void)
+{
+	int ret;
+	void __iomem *scc;
+	u32 a15_cluster_id, a7_cluster_id, sys_info;
+	struct device_node *np;
+
+	/*
+	 * The power management-related features are hidden behind
+	 * SCC registers. We need to extract runtime information like
+	 * cluster ids and number of CPUs really available in clusters.
+	 */
+	np = of_find_compatible_node(NULL, NULL,
+			"arm,vexpress-scc,v2p-ca15_a7");
+	scc = of_iomap(np, 0);
+	if (!scc)
+		return -ENODEV;
+
+	a15_cluster_id = readl_relaxed(scc + A15_CONF) & 0xf;
+	a7_cluster_id = readl_relaxed(scc + A7_CONF) & 0xf;
+	if (a15_cluster_id >= TC2_CLUSTERS || a7_cluster_id >= TC2_CLUSTERS)
+		return -EINVAL;
+
+	sys_info = readl_relaxed(scc + SYS_INFO);
+	tc2_nr_cpus[a15_cluster_id] = (sys_info >> 16) & 0xf;
+	tc2_nr_cpus[a7_cluster_id] = (sys_info >> 20) & 0xf;
+
+	/*
+	 * A subset of the SCC registers is also used to communicate
+	 * with the SPC (power controller). We need to be able to
+	 * drive it very early in the boot process to power up
+	 * processors, so we initialize the SPC driver here.
+	 */
+	ret = ve_spc_init(scc + SPC_BASE, a15_cluster_id);
+	if (ret)
+		return ret;
+
+	if (!cci_probed())
+		return -ENODEV;
+
+	if (!tc2_pm_usage_count_init())
+		return -EINVAL;
+
+	ret = mcpm_platform_register(&tc2_pm_power_ops);
+	if (!ret) {
+		mcpm_sync_init(tc2_pm_power_up_setup);
+		pr_info("TC2 power management initialized\n");
+	}
+	return ret;
+}
+
+early_initcall(tc2_pm_init);
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 95a469e..4f8b8cb 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -1,12 +1,10 @@
 /*
  * Versatile Express V2M Motherboard Support
  */
-#include <linux/clocksource.h>
 #include <linux/device.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/mmci.h>
 #include <linux/io.h>
-#include <linux/clocksource.h>
 #include <linux/smp.h>
 #include <linux/init.h>
 #include <linux/of_address.h>
@@ -22,7 +20,6 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/vexpress.h>
-#include <linux/clk-provider.h>
 #include <linux/clkdev.h>
 
 #include <asm/mach-types.h>
@@ -422,16 +419,8 @@ void __init v2m_dt_init_early(void)
 			pr_warning("vexpress: DT HBI (%x) is not matching "
 					"hardware (%x)!\n", dt_hbi, hbi);
 	}
-}
-
-static void __init v2m_dt_timer_init(void)
-{
-	of_clk_init(NULL);
 
-	clocksource_of_init();
-
-	versatile_sched_clock_init(vexpress_get_24mhz_clock_base(),
-				24000000);
+	versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), 24000000);
 }
 
 static const struct of_device_id v2m_dt_bus_match[] __initconst = {
@@ -458,6 +447,5 @@ DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express")
 	.smp_init	= smp_init_ops(vexpress_smp_init_ops),
 	.map_io		= v2m_dt_map_io,
 	.init_early	= v2m_dt_init_early,
-	.init_time	= v2m_dt_timer_init,
 	.init_machine	= v2m_dt_init,
 MACHINE_END
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index 9b25293..927be93 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -5,7 +5,6 @@ config ARCH_VT8500
 	select CLKDEV_LOOKUP
 	select CLKSRC_OF
 	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
 	select VT8500_TIMER
 	select PINCTRL
 	help
diff --git a/arch/arm/mach-vt8500/common.h b/arch/arm/mach-vt8500/common.h
deleted file mode 100644
index 087787a..0000000
--- a/arch/arm/mach-vt8500/common.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/arch/arm/mach-vt8500/dt_common.h
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ARCH_ARM_MACH_VT8500_DT_COMMON_H
-#define __ARCH_ARM_MACH_VT8500_DT_COMMON_H
-
-#include <linux/of.h>
-
-/* defined in drivers/clk/clk-vt8500.c */
-void __init vtwm_clk_init(void __iomem *pmc_base);
-
-#endif
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
index eefaa60..4a73464 100644
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -18,7 +18,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/clocksource.h>
 #include <linux/io.h>
 #include <linux/pm.h>
 #include <linux/reboot.h>
@@ -33,8 +32,6 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 
-#include "common.h"
-
 #define LEGACY_GPIO_BASE	0xD8110000
 #define LEGACY_PMC_BASE		0xD8130000
 
@@ -162,8 +159,6 @@ void __init vt8500_init(void)
 	else
 		pr_err("%s: PMC Hibernation register could not be remapped, not enabling power off!\n", __func__);
 
-	vtwm_clk_init(pmc_base);
-
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
@@ -180,7 +175,6 @@ DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)")
 	.dt_compat	= vt8500_dt_compat,
 	.map_io		= vt8500_map_io,
 	.init_machine	= vt8500_init,
-	.init_time	= clocksource_of_init,
 	.restart	= vt8500_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index c1d61f2..04f8a4a 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -6,7 +6,7 @@ config ARCH_ZYNQ
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select ICST
 	select MIGHT_HAVE_CACHE_L2X0
 	select USE_OF
diff --git a/arch/arm/mach-zynq/hotplug.c b/arch/arm/mach-zynq/hotplug.c
index c89672b..5052c70 100644
--- a/arch/arm/mach-zynq/hotplug.c
+++ b/arch/arm/mach-zynq/hotplug.c
@@ -40,44 +40,6 @@ static inline void zynq_cpu_enter_lowpower(void)
 	  : "cc");
 }
 
-static inline void zynq_cpu_leave_lowpower(void)
-{
-	unsigned int v;
-
-	asm volatile(
-	"	mrc	p15, 0, %0, c1, c0, 0\n"
-	"	orr	%0, %0, %1\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	orr	%0, %0, #0x40\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	  : "=&r" (v)
-	  : "Ir" (CR_C)
-	  : "cc");
-}
-
-static inline void zynq_platform_do_lowpower(unsigned int cpu, int *spurious)
-{
-	/*
-	 * there is no power-control hardware on this platform, so all
-	 * we can do is put the core into WFI; this is safe as the calling
-	 * code will have already disabled interrupts
-	 */
-	for (;;) {
-		dsb();
-		wfi();
-
-		/*
-		 * Getting here, means that we have come out of WFI without
-		 * having been woken up - this shouldn't happen
-		 *
-		 * Just note it happening - when we're woken, we can report
-		 * its occurrence.
-		 */
-		(*spurious)++;
-	}
-}
-
 /*
  * platform-specific code to shutdown a CPU
  *
@@ -85,20 +47,13 @@ static inline void zynq_platform_do_lowpower(unsigned int cpu, int *spurious)
  */
 void zynq_platform_cpu_die(unsigned int cpu)
 {
-	int spurious = 0;
-
-	/*
-	 * we're ready for shutdown now, so do it
-	 */
 	zynq_cpu_enter_lowpower();
-	zynq_platform_do_lowpower(cpu, &spurious);
 
 	/*
-	 * bring this CPU back into the world of cache
-	 * coherency, and then restore interrupts
+	 * there is no power-control hardware on this platform, so all
+	 * we can do is put the core into WFI; this is safe as the calling
+	 * code will have already disabled interrupts
 	 */
-	zynq_cpu_leave_lowpower();
-
-	if (spurious)
-		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
+	for (;;)
+		cpu_do_idle();
 }
diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c
index 50d008d..1836d5a 100644
--- a/arch/arm/mach-zynq/slcr.c
+++ b/arch/arm/mach-zynq/slcr.c
@@ -14,32 +14,21 @@
  * 02139, USA.
  */
 
-#include <linux/export.h>
 #include <linux/io.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/of_address.h>
-#include <linux/uaccess.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/string.h>
 #include <linux/clk/zynq.h>
 #include "common.h"
 
-#define SLCR_UNLOCK_MAGIC		0xDF0D
-#define SLCR_UNLOCK			0x8   /* SCLR unlock register */
-
+/* register offsets */
+#define SLCR_UNLOCK_OFFSET		0x8   /* SCLR unlock register */
 #define SLCR_PS_RST_CTRL_OFFSET		0x200 /* PS Software Reset Control */
+#define SLCR_A9_CPU_RST_CTRL_OFFSET	0x244 /* CPU Software Reset Control */
+#define SLCR_REBOOT_STATUS_OFFSET	0x258 /* PS Reboot Status */
 
+#define SLCR_UNLOCK_MAGIC		0xDF0D
 #define SLCR_A9_CPU_CLKSTOP		0x10
 #define SLCR_A9_CPU_RST			0x1
 
-#define SLCR_A9_CPU_RST_CTRL		0x244 /* CPU Software Reset Control */
-#define SLCR_REBOOT_STATUS		0x258 /* PS Reboot Status */
-
 void __iomem *zynq_slcr_base;
 
 /**
@@ -54,15 +43,15 @@ void zynq_slcr_system_reset(void)
 	 * Note that this seems to require raw i/o
 	 * functions or there's a lockup?
 	 */
-	writel(SLCR_UNLOCK_MAGIC, zynq_slcr_base + SLCR_UNLOCK);
+	writel(SLCR_UNLOCK_MAGIC, zynq_slcr_base + SLCR_UNLOCK_OFFSET);
 
 	/*
 	 * Clear 0x0F000000 bits of reboot status register to workaround
 	 * the FSBL not loading the bitstream after soft-reboot
 	 * This is a temporary solution until we know more.
 	 */
-	reboot = readl(zynq_slcr_base + SLCR_REBOOT_STATUS);
-	writel(reboot & 0xF0FFFFFF, zynq_slcr_base + SLCR_REBOOT_STATUS);
+	reboot = readl(zynq_slcr_base + SLCR_REBOOT_STATUS_OFFSET);
+	writel(reboot & 0xF0FFFFFF, zynq_slcr_base + SLCR_REBOOT_STATUS_OFFSET);
 	writel(1, zynq_slcr_base + SLCR_PS_RST_CTRL_OFFSET);
 }
 
@@ -72,11 +61,11 @@ void zynq_slcr_system_reset(void)
  */
 void zynq_slcr_cpu_start(int cpu)
 {
-	/* enable CPUn */
-	writel(SLCR_A9_CPU_CLKSTOP << cpu,
-	       zynq_slcr_base + SLCR_A9_CPU_RST_CTRL);
-	/* enable CLK for CPUn */
-	writel(0x0 << cpu, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL);
+	u32 reg = readl(zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
+	reg &= ~(SLCR_A9_CPU_RST << cpu);
+	writel(reg, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
+	reg &= ~(SLCR_A9_CPU_CLKSTOP << cpu);
+	writel(reg, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
 }
 
 /**
@@ -85,9 +74,9 @@ void zynq_slcr_cpu_start(int cpu)
  */
 void zynq_slcr_cpu_stop(int cpu)
 {
-	/* stop CLK and reset CPUn */
-	writel((SLCR_A9_CPU_CLKSTOP | SLCR_A9_CPU_RST) << cpu,
-	       zynq_slcr_base + SLCR_A9_CPU_RST_CTRL);
+	u32 reg = readl(zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
+	reg |= (SLCR_A9_CPU_CLKSTOP | SLCR_A9_CPU_RST) << cpu;
+	writel(reg, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
 }
 
 /**
@@ -113,7 +102,7 @@ int __init zynq_slcr_init(void)
 	}
 
 	/* unlock the SLCR so that registers can be changed */
-	writel(SLCR_UNLOCK_MAGIC, zynq_slcr_base + SLCR_UNLOCK);
+	writel(SLCR_UNLOCK_MAGIC, zynq_slcr_base + SLCR_UNLOCK_OFFSET);
 
 	pr_info("%s mapped to %p\n", np->name, zynq_slcr_base);
 
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index d70e0ab..447da6f 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -290,7 +290,7 @@ static void l2x0_disable(void)
 	raw_spin_lock_irqsave(&l2x0_lock, flags);
 	__l2x0_flush_all();
 	writel_relaxed(0, l2x0_base + L2X0_CTRL);
-	dsb();
+	dsb(st);
 	raw_spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 
@@ -417,9 +417,9 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
 		outer_cache.disable = l2x0_disable;
 	}
 
-	printk(KERN_INFO "%s cache controller enabled\n", type);
-	printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n",
-			ways, cache_id, aux, l2x0_size);
+	pr_info("%s cache controller enabled\n", type);
+	pr_info("l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d kB\n",
+		ways, cache_id, aux, l2x0_size >> 10);
 }
 
 #ifdef CONFIG_OF
@@ -929,7 +929,9 @@ static const struct of_device_id l2x0_ids[] __initconst = {
 	  .data = (void *)&aurora_no_outer_data},
 	{ .compatible = "marvell,aurora-outer-cache",
 	  .data = (void *)&aurora_with_outer_data},
-	{ .compatible = "bcm,bcm11351-a2-pl310-cache",
+	{ .compatible = "brcm,bcm11351-a2-pl310-cache",
+	  .data = (void *)&bcm_l2x0_data},
+	{ .compatible = "bcm,bcm11351-a2-pl310-cache", /* deprecated name */
 	  .data = (void *)&bcm_l2x0_data},
 	{}
 };
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 515b000..b5c467a 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -282,7 +282,7 @@ ENTRY(v7_coherent_user_range)
 	add	r12, r12, r2
 	cmp	r12, r1
 	blo	1b
-	dsb
+	dsb	ishst
 	icache_line_size r2, r3
 	sub	r3, r2, #1
 	bic	r12, r0, r3
@@ -294,7 +294,7 @@ ENTRY(v7_coherent_user_range)
 	mov	r0, #0
 	ALT_SMP(mcr	p15, 0, r0, c7, c1, 6)	@ invalidate BTB Inner Shareable
 	ALT_UP(mcr	p15, 0, r0, c7, c5, 6)	@ invalidate BTB
-	dsb
+	dsb	ishst
 	isb
 	mov	pc, lr
 
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index 4a05444..84e6f77 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -162,10 +162,7 @@ static void flush_context(unsigned int cpu)
 	}
 
 	/* Queue a TLB invalidate and flush the I-cache if necessary. */
-	if (!tlb_ops_need_broadcast())
-		cpumask_set_cpu(cpu, &tlb_flush_pending);
-	else
-		cpumask_setall(&tlb_flush_pending);
+	cpumask_setall(&tlb_flush_pending);
 
 	if (icache_is_vivt_asid_tagged())
 		__flush_icache_all();
@@ -245,8 +242,6 @@ void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk)
 	if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) {
 		local_flush_bp_all();
 		local_flush_tlb_all();
-		if (erratum_a15_798181())
-			dummy_flush_tlb_a15_erratum();
 	}
 
 	atomic64_set(&per_cpu(active_asids, cpu), asid);
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 7f9b179..1272ed2 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -358,7 +358,7 @@ static int __init atomic_pool_init(void)
 	if (!pages)
 		goto no_pages;
 
-	if (IS_ENABLED(CONFIG_CMA))
+	if (IS_ENABLED(CONFIG_DMA_CMA))
 		ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page,
 					      atomic_pool_init);
 	else
@@ -455,7 +455,6 @@ static void __dma_remap(struct page *page, size_t size, pgprot_t prot)
 	unsigned end = start + size;
 
 	apply_to_page_range(&init_mm, start, size, __dma_update_pte, &prot);
-	dsb();
 	flush_tlb_kernel_range(start, end);
 }
 
@@ -670,7 +669,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 		addr = __alloc_simple_buffer(dev, size, gfp, &page);
 	else if (!(gfp & __GFP_WAIT))
 		addr = __alloc_from_pool(size, &page);
-	else if (!IS_ENABLED(CONFIG_CMA))
+	else if (!IS_ENABLED(CONFIG_DMA_CMA))
 		addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller);
 	else
 		addr = __alloc_from_contiguous(dev, size, prot, &page, caller);
@@ -759,7 +758,7 @@ static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
 		__dma_free_buffer(page, size);
 	} else if (__free_from_pool(cpu_addr, size)) {
 		return;
-	} else if (!IS_ENABLED(CONFIG_CMA)) {
+	} else if (!IS_ENABLED(CONFIG_DMA_CMA)) {
 		__dma_free_remap(cpu_addr, size);
 		__dma_free_buffer(page, size);
 	} else {
@@ -1233,7 +1232,8 @@ __iommu_create_mapping(struct device *dev, struct page **pages, size_t size)
 				break;
 
 		len = (j - i) << PAGE_SHIFT;
-		ret = iommu_map(mapping->domain, iova, phys, len, 0);
+		ret = iommu_map(mapping->domain, iova, phys, len,
+				IOMMU_READ|IOMMU_WRITE);
 		if (ret < 0)
 			goto fail;
 		iova += len;
@@ -1432,6 +1432,27 @@ static int arm_iommu_get_sgtable(struct device *dev, struct sg_table *sgt,
 					 GFP_KERNEL);
 }
 
+static int __dma_direction_to_prot(enum dma_data_direction dir)
+{
+	int prot;
+
+	switch (dir) {
+	case DMA_BIDIRECTIONAL:
+		prot = IOMMU_READ | IOMMU_WRITE;
+		break;
+	case DMA_TO_DEVICE:
+		prot = IOMMU_READ;
+		break;
+	case DMA_FROM_DEVICE:
+		prot = IOMMU_WRITE;
+		break;
+	default:
+		prot = 0;
+	}
+
+	return prot;
+}
+
 /*
  * Map a part of the scatter-gather list into contiguous io address space
  */
@@ -1445,6 +1466,7 @@ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg,
 	int ret = 0;
 	unsigned int count;
 	struct scatterlist *s;
+	int prot;
 
 	size = PAGE_ALIGN(size);
 	*handle = DMA_ERROR_CODE;
@@ -1461,7 +1483,9 @@ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg,
 			!dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs))
 			__dma_page_cpu_to_dev(sg_page(s), s->offset, s->length, dir);
 
-		ret = iommu_map(mapping->domain, iova, phys, len, 0);
+		prot = __dma_direction_to_prot(dir);
+
+		ret = iommu_map(mapping->domain, iova, phys, len, prot);
 		if (ret < 0)
 			goto fail;
 		count += len >> PAGE_SHIFT;
@@ -1666,19 +1690,7 @@ static dma_addr_t arm_coherent_iommu_map_page(struct device *dev, struct page *p
 	if (dma_addr == DMA_ERROR_CODE)
 		return dma_addr;
 
-	switch (dir) {
-	case DMA_BIDIRECTIONAL:
-		prot = IOMMU_READ | IOMMU_WRITE;
-		break;
-	case DMA_TO_DEVICE:
-		prot = IOMMU_READ;
-		break;
-	case DMA_FROM_DEVICE:
-		prot = IOMMU_WRITE;
-		break;
-	default:
-		prot = 0;
-	}
+	prot = __dma_direction_to_prot(dir);
 
 	ret = iommu_map(mapping->domain, dma_addr, page_to_phys(page), len, prot);
 	if (ret < 0)
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index c97f794..eb8830a 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -261,9 +261,7 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	struct task_struct *tsk;
 	struct mm_struct *mm;
 	int fault, sig, code;
-	int write = fsr & FSR_WRITE;
-	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
-				(write ? FAULT_FLAG_WRITE : 0);
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
 
 	if (notify_page_fault(regs, fsr))
 		return 0;
@@ -282,6 +280,11 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	if (in_atomic() || !mm)
 		goto no_context;
 
+	if (user_mode(regs))
+		flags |= FAULT_FLAG_USER;
+	if (fsr & FSR_WRITE)
+		flags |= FAULT_FLAG_WRITE;
+
 	/*
 	 * As per x86, we may deadlock here.  However, since the kernel only
 	 * validly references user space from well defined areas of the code,
@@ -349,6 +352,13 @@ retry:
 	if (likely(!(fault & (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS))))
 		return 0;
 
+	/*
+	 * If we are in kernel mode at this point, we
+	 * have no context to handle this fault with.
+	 */
+	if (!user_mode(regs))
+		goto no_context;
+
 	if (fault & VM_FAULT_OOM) {
 		/*
 		 * We ran out of memory, call the OOM killer, and return to
@@ -359,13 +369,6 @@ retry:
 		return 0;
 	}
 
-	/*
-	 * If we are in kernel mode at this point, we
-	 * have no context to handle this fault with.
-	 */
-	if (!user_mode(regs))
-		goto no_context;
-
 	if (fault & VM_FAULT_SIGBUS) {
 		/*
 		 * We had some memory, but were unable to
diff --git a/arch/arm/mm/hugetlbpage.c b/arch/arm/mm/hugetlbpage.c
index 3d1e4a2..54ee616 100644
--- a/arch/arm/mm/hugetlbpage.c
+++ b/arch/arm/mm/hugetlbpage.c
@@ -36,22 +36,6 @@
  * of type casting from pmd_t * to pte_t *.
  */
 
-pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
-{
-	pgd_t *pgd;
-	pud_t *pud;
-	pmd_t *pmd = NULL;
-
-	pgd = pgd_offset(mm, addr);
-	if (pgd_present(*pgd)) {
-		pud = pud_offset(pgd, addr);
-		if (pud_present(*pud))
-			pmd = pmd_offset(pud, addr);
-	}
-
-	return (pte_t *)pmd;
-}
-
 struct page *follow_huge_addr(struct mm_struct *mm, unsigned long address,
 			      int write)
 {
@@ -68,34 +52,12 @@ int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
 	return 0;
 }
 
-pte_t *huge_pte_alloc(struct mm_struct *mm,
-			unsigned long addr, unsigned long sz)
-{
-	pgd_t *pgd;
-	pud_t *pud;
-	pte_t *pte = NULL;
-
-	pgd = pgd_offset(mm, addr);
-	pud = pud_alloc(mm, pgd, addr);
-	if (pud)
-		pte = (pte_t *)pmd_alloc(mm, pud, addr);
-
-	return pte;
-}
-
-struct page *
-follow_huge_pmd(struct mm_struct *mm, unsigned long address,
-		pmd_t *pmd, int write)
+int pmd_huge(pmd_t pmd)
 {
-	struct page *page;
-
-	page = pte_page(*(pte_t *)pmd);
-	if (page)
-		page += ((address & ~PMD_MASK) >> PAGE_SHIFT);
-	return page;
+	return pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT);
 }
 
-int pmd_huge(pmd_t pmd)
+int pmd_huge_support(void)
 {
-	return pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT);
+	return 1;
 }
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 15225d8..18ec4c5 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -77,7 +77,7 @@ static int __init parse_tag_initrd2(const struct tag *tag)
 __tagtable(ATAG_INITRD2, parse_tag_initrd2);
 
 #ifdef CONFIG_OF_FLATTREE
-void __init early_init_dt_setup_initrd_arch(unsigned long start, unsigned long end)
+void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
 {
 	phys_initrd_start = start;
 	phys_initrd_size = end - start;
@@ -207,7 +207,7 @@ static void __init arm_bootmem_init(unsigned long start_pfn,
 
 #ifdef CONFIG_ZONE_DMA
 
-unsigned long arm_dma_zone_size __read_mostly;
+phys_addr_t arm_dma_zone_size __read_mostly;
 EXPORT_SYMBOL(arm_dma_zone_size);
 
 /*
@@ -231,7 +231,7 @@ static void __init arm_adjust_dma_zone(unsigned long *size, unsigned long *hole,
 }
 #endif
 
-void __init setup_dma_zone(struct machine_desc *mdesc)
+void __init setup_dma_zone(const struct machine_desc *mdesc)
 {
 #ifdef CONFIG_ZONE_DMA
 	if (mdesc->dma_zone_size) {
@@ -335,7 +335,8 @@ phys_addr_t __init arm_memblock_steal(phys_addr_t size, phys_addr_t align)
 	return phys;
 }
 
-void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc)
+void __init arm_memblock_init(struct meminfo *mi,
+	const struct machine_desc *mdesc)
 {
 	int i;
 
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 53cdbd3..b1d17ee 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -1186,7 +1186,7 @@ void __init arm_mm_memblock_reserve(void)
  * called function.  This means you can't use any function or debugging
  * method which may touch any device, otherwise the kernel _will_ crash.
  */
-static void __init devicemaps_init(struct machine_desc *mdesc)
+static void __init devicemaps_init(const struct machine_desc *mdesc)
 {
 	struct map_desc map;
 	unsigned long addr;
@@ -1319,7 +1319,7 @@ static void __init map_lowmem(void)
  * paging_init() sets up the page tables, initialises the zone memory
  * maps, and sets up the zero page, bad page and bad page tables.
  */
-void __init paging_init(struct machine_desc *mdesc)
+void __init paging_init(const struct machine_desc *mdesc)
 {
 	void *zero_page;
 
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 1fa5010..34d4ab2 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -299,7 +299,7 @@ void __init sanity_check_meminfo(void)
  * paging_init() sets up the page tables, initialises the zone memory
  * maps, and sets up the zero page, bad page and bad page tables.
  */
-void __init paging_init(struct machine_desc *mdesc)
+void __init paging_init(const struct machine_desc *mdesc)
 {
 	early_trap_init((void *)CONFIG_VECTORS_BASE);
 	mpu_setup();
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index d5146b9..db79b62 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -514,6 +514,32 @@ ENTRY(cpu_feroceon_set_pte_ext)
 #endif
 	mov	pc, lr
 
+/* Suspend/resume support: taken from arch/arm/mm/proc-arm926.S */
+.globl	cpu_feroceon_suspend_size
+.equ	cpu_feroceon_suspend_size, 4 * 3
+#ifdef CONFIG_ARM_CPU_SUSPEND
+ENTRY(cpu_feroceon_do_suspend)
+	stmfd	sp!, {r4 - r6, lr}
+	mrc	p15, 0, r4, c13, c0, 0	@ PID
+	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
+	mrc	p15, 0, r6, c1, c0, 0	@ Control register
+	stmia	r0, {r4 - r6}
+	ldmfd	sp!, {r4 - r6, pc}
+ENDPROC(cpu_feroceon_do_suspend)
+
+ENTRY(cpu_feroceon_do_resume)
+	mov	ip, #0
+	mcr	p15, 0, ip, c8, c7, 0	@ invalidate I+D TLBs
+	mcr	p15, 0, ip, c7, c7, 0	@ invalidate I+D caches
+	ldmia	r0, {r4 - r6}
+	mcr	p15, 0, r4, c13, c0, 0	@ PID
+	mcr	p15, 0, r5, c3, c0, 0	@ Domain ID
+	mcr	p15, 0, r1, c2, c0, 0	@ TTB address
+	mov	r0, r6			@ control register
+	b	cpu_resume_mmu
+ENDPROC(cpu_feroceon_do_resume)
+#endif
+
 	.type	__feroceon_setup, #function
 __feroceon_setup:
 	mov	r0, #0
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 73398bc..c63d9bd 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -83,7 +83,7 @@ ENTRY(cpu_v7_dcache_clean_area)
 	add	r0, r0, r2
 	subs	r1, r1, r2
 	bhi	2b
-	dsb
+	dsb	ishst
 	mov	pc, lr
 ENDPROC(cpu_v7_dcache_clean_area)
 
@@ -330,7 +330,19 @@ __v7_setup:
 1:
 #endif
 
-3:	mov	r10, #0
+	/* Cortex-A15 Errata */
+3:	ldr	r10, =0x00000c0f		@ Cortex-A15 primary part number
+	teq	r0, r10
+	bne	4f
+
+#ifdef CONFIG_ARM_ERRATA_773022
+	cmp	r6, #0x4			@ only present up to r0p4
+	mrcle	p15, 0, r10, c1, c0, 1		@ read aux control register
+	orrle	r10, r10, #1 << 1		@ disable loop buffer
+	mcrle	p15, 0, r10, c1, c0, 1		@ write aux control register
+#endif
+
+4:	mov	r10, #0
 	mcr	p15, 0, r10, c7, c5, 0		@ I+BTB cache invalidate
 	dsb
 #ifdef CONFIG_MMU
diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S
index ea94765..3553087 100644
--- a/arch/arm/mm/tlb-v7.S
+++ b/arch/arm/mm/tlb-v7.S
@@ -35,7 +35,7 @@
 ENTRY(v7wbi_flush_user_tlb_range)
 	vma_vm_mm r3, r2			@ get vma->vm_mm
 	mmid	r3, r3				@ get vm_mm->context.id
-	dsb
+	dsb	ish
 	mov	r0, r0, lsr #PAGE_SHIFT		@ align address
 	mov	r1, r1, lsr #PAGE_SHIFT
 	asid	r3, r3				@ mask ASID
@@ -56,7 +56,7 @@ ENTRY(v7wbi_flush_user_tlb_range)
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
 	blo	1b
-	dsb
+	dsb	ish
 	mov	pc, lr
 ENDPROC(v7wbi_flush_user_tlb_range)
 
@@ -69,7 +69,7 @@ ENDPROC(v7wbi_flush_user_tlb_range)
  *	- end   - end address (exclusive, may not be aligned)
  */
 ENTRY(v7wbi_flush_kern_tlb_range)
-	dsb
+	dsb	ish
 	mov	r0, r0, lsr #PAGE_SHIFT		@ align address
 	mov	r1, r1, lsr #PAGE_SHIFT
 	mov	r0, r0, lsl #PAGE_SHIFT
@@ -84,7 +84,7 @@ ENTRY(v7wbi_flush_kern_tlb_range)
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
 	blo	1b
-	dsb
+	dsb	ish
 	isb
 	mov	pc, lr
 ENDPROC(v7wbi_flush_kern_tlb_range)
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
index f50d223..99b44e0 100644
--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -930,4 +930,5 @@ void bpf_jit_free(struct sk_filter *fp)
 {
 	if (fp->bpf_func != sk_run_filter)
 		module_free(NULL, fp->bpf_func);
+	kfree(fp);
 }
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index f82bae2..436ea97 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -106,7 +106,7 @@ config OMAP_32K_TIMER
 	  This timer saves power compared to the OMAP_MPU_TIMER, and has
 	  support for no tick during idle. The 32KHz timer provides less
 	  intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
-	  currently only available for OMAP16XX, 24XX, 34XX and OMAP4/5.
+	  currently only available for OMAP16XX, 24XX, 34XX, OMAP4/5 and DRA7XX.
 
 	  On OMAP2PLUS this value is only used for CONFIG_HZ and
 	  CLOCK_TICK_RATE compile time calculation.
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 4d463ca..01619c2 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1965,7 +1965,6 @@ static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
 static struct irqaction omap24xx_dma_irq = {
 	.name = "DMA",
 	.handler = omap2_dma_irq_handler,
-	.flags = IRQF_DISABLED
 };
 
 #else
@@ -2083,6 +2082,7 @@ static int omap_system_dma_probe(struct platform_device *pdev)
 		dma_irq = platform_get_irq_byname(pdev, irq_name);
 		if (dma_irq < 0) {
 			dev_err(&pdev->dev, "failed: request IRQ %d", dma_irq);
+			ret = dma_irq;
 			goto exit_dma_lch_fail;
 		}
 		ret = setup_irq(dma_irq, &omap24xx_dma_irq);
diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c
index 8db0b98..c492e1b 100644
--- a/arch/arm/plat-orion/irq.c
+++ b/arch/arm/plat-orion/irq.c
@@ -47,7 +47,7 @@ static int __init orion_add_irq_domain(struct device_node *np,
 	do {
 		base = of_iomap(np, i);
 		if (base) {
-			orion_irq_init(i * 32, base);
+			orion_irq_init(i * 32, base + 0x04);
 			i++;
 		}
 	} while (base);
diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
index 8e11e96..3ea0290 100644
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@@ -30,6 +30,8 @@
 #include <linux/platform_device.h>
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <asm/irq.h>
 #include <mach/hardware.h>
@@ -60,6 +62,30 @@ struct ssp_device *pxa_ssp_request(int port, const char *label)
 }
 EXPORT_SYMBOL(pxa_ssp_request);
 
+struct ssp_device *pxa_ssp_request_of(const struct device_node *of_node,
+				      const char *label)
+{
+	struct ssp_device *ssp = NULL;
+
+	mutex_lock(&ssp_lock);
+
+	list_for_each_entry(ssp, &ssp_list, node) {
+		if (ssp->of_node == of_node && ssp->use_count == 0) {
+			ssp->use_count++;
+			ssp->label = label;
+			break;
+		}
+	}
+
+	mutex_unlock(&ssp_lock);
+
+	if (&ssp->node == &ssp_list)
+		return NULL;
+
+	return ssp;
+}
+EXPORT_SYMBOL(pxa_ssp_request_of);
+
 void pxa_ssp_free(struct ssp_device *ssp)
 {
 	mutex_lock(&ssp_lock);
@@ -72,96 +98,136 @@ void pxa_ssp_free(struct ssp_device *ssp)
 }
 EXPORT_SYMBOL(pxa_ssp_free);
 
+#ifdef CONFIG_OF
+static const struct of_device_id pxa_ssp_of_ids[] = {
+	{ .compatible = "mrvl,pxa25x-ssp",	.data = (void *) PXA25x_SSP },
+	{ .compatible = "mvrl,pxa25x-nssp",	.data = (void *) PXA25x_NSSP },
+	{ .compatible = "mrvl,pxa27x-ssp",	.data = (void *) PXA27x_SSP },
+	{ .compatible = "mrvl,pxa3xx-ssp",	.data = (void *) PXA3xx_SSP },
+	{ .compatible = "mvrl,pxa168-ssp",	.data = (void *) PXA168_SSP },
+	{ .compatible = "mrvl,pxa910-ssp",	.data = (void *) PXA910_SSP },
+	{ .compatible = "mrvl,ce4100-ssp",	.data = (void *) CE4100_SSP },
+	{ .compatible = "mrvl,lpss-ssp",	.data = (void *) LPSS_SSP },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, pxa_ssp_of_ids);
+#endif
+
 static int pxa_ssp_probe(struct platform_device *pdev)
 {
-	const struct platform_device_id *id = platform_get_device_id(pdev);
 	struct resource *res;
 	struct ssp_device *ssp;
-	int ret = 0;
+	struct device *dev = &pdev->dev;
 
-	ssp = kzalloc(sizeof(struct ssp_device), GFP_KERNEL);
-	if (ssp == NULL) {
-		dev_err(&pdev->dev, "failed to allocate memory");
+	ssp = devm_kzalloc(dev, sizeof(struct ssp_device), GFP_KERNEL);
+	if (ssp == NULL)
 		return -ENOMEM;
-	}
+
 	ssp->pdev = pdev;
 
-	ssp->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(ssp->clk)) {
-		ret = PTR_ERR(ssp->clk);
-		goto err_free;
-	}
+	ssp->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(ssp->clk))
+		return PTR_ERR(ssp->clk);
 
-	res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "no SSP RX DRCMR defined\n");
-		ret = -ENODEV;
-		goto err_free_clk;
-	}
-	ssp->drcmr_rx = res->start;
+	if (dev->of_node) {
+		struct of_phandle_args dma_spec;
+		struct device_node *np = dev->of_node;
+		int ret;
 
-	res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "no SSP TX DRCMR defined\n");
-		ret = -ENODEV;
-		goto err_free_clk;
+		/*
+		 * FIXME: we should allocate the DMA channel from this
+		 * context and pass the channel down to the ssp users.
+		 * For now, we lookup the rx and tx indices manually
+		 */
+
+		/* rx */
+		ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells",
+						 0, &dma_spec);
+
+		if (ret) {
+			dev_err(dev, "Can't parse dmas property\n");
+			return -ENODEV;
+		}
+		ssp->drcmr_rx = dma_spec.args[0];
+		of_node_put(dma_spec.np);
+
+		/* tx */
+		ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells",
+						 1, &dma_spec);
+		if (ret) {
+			dev_err(dev, "Can't parse dmas property\n");
+			return -ENODEV;
+		}
+		ssp->drcmr_tx = dma_spec.args[0];
+		of_node_put(dma_spec.np);
+	} else {
+		res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+		if (res == NULL) {
+			dev_err(dev, "no SSP RX DRCMR defined\n");
+			return -ENODEV;
+		}
+		ssp->drcmr_rx = res->start;
+
+		res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+		if (res == NULL) {
+			dev_err(dev, "no SSP TX DRCMR defined\n");
+			return -ENODEV;
+		}
+		ssp->drcmr_tx = res->start;
 	}
-	ssp->drcmr_tx = res->start;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (res == NULL) {
-		dev_err(&pdev->dev, "no memory resource defined\n");
-		ret = -ENODEV;
-		goto err_free_clk;
+		dev_err(dev, "no memory resource defined\n");
+		return -ENODEV;
 	}
 
-	res = request_mem_region(res->start, resource_size(res),
-			pdev->name);
+	res = devm_request_mem_region(dev, res->start, resource_size(res),
+				      pdev->name);
 	if (res == NULL) {
-		dev_err(&pdev->dev, "failed to request memory resource\n");
-		ret = -EBUSY;
-		goto err_free_clk;
+		dev_err(dev, "failed to request memory resource\n");
+		return -EBUSY;
 	}
 
 	ssp->phys_base = res->start;
 
-	ssp->mmio_base = ioremap(res->start, resource_size(res));
+	ssp->mmio_base = devm_ioremap(dev, res->start, resource_size(res));
 	if (ssp->mmio_base == NULL) {
-		dev_err(&pdev->dev, "failed to ioremap() registers\n");
-		ret = -ENODEV;
-		goto err_free_mem;
+		dev_err(dev, "failed to ioremap() registers\n");
+		return -ENODEV;
 	}
 
 	ssp->irq = platform_get_irq(pdev, 0);
 	if (ssp->irq < 0) {
-		dev_err(&pdev->dev, "no IRQ resource defined\n");
-		ret = -ENODEV;
-		goto err_free_io;
+		dev_err(dev, "no IRQ resource defined\n");
+		return -ENODEV;
+	}
+
+	if (dev->of_node) {
+		const struct of_device_id *id =
+			of_match_device(of_match_ptr(pxa_ssp_of_ids), dev);
+		ssp->type = (int) id->data;
+	} else {
+		const struct platform_device_id *id =
+			platform_get_device_id(pdev);
+		ssp->type = (int) id->driver_data;
+
+		/* PXA2xx/3xx SSP ports starts from 1 and the internal pdev->id
+		 * starts from 0, do a translation here
+		 */
+		ssp->port_id = pdev->id + 1;
 	}
 
-	/* PXA2xx/3xx SSP ports starts from 1 and the internal pdev->id
-	 * starts from 0, do a translation here
-	 */
-	ssp->port_id = pdev->id + 1;
 	ssp->use_count = 0;
-	ssp->type = (int)id->driver_data;
+	ssp->of_node = dev->of_node;
 
 	mutex_lock(&ssp_lock);
 	list_add(&ssp->node, &ssp_list);
 	mutex_unlock(&ssp_lock);
 
 	platform_set_drvdata(pdev, ssp);
-	return 0;
 
-err_free_io:
-	iounmap(ssp->mmio_base);
-err_free_mem:
-	release_mem_region(res->start, resource_size(res));
-err_free_clk:
-	clk_put(ssp->clk);
-err_free:
-	kfree(ssp);
-	return ret;
+	return 0;
 }
 
 static int pxa_ssp_remove(struct platform_device *pdev)
@@ -201,8 +267,9 @@ static struct platform_driver pxa_ssp_driver = {
 	.probe		= pxa_ssp_probe,
 	.remove		= pxa_ssp_remove,
 	.driver		= {
-		.owner	= THIS_MODULE,
-		.name	= "pxa2xx-ssp",
+		.owner		= THIS_MODULE,
+		.name		= "pxa2xx-ssp",
+		.of_match_table	= of_match_ptr(pxa_ssp_of_ids),
 	},
 	.id_table	= ssp_id_table,
 };
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index a5b5ff6..6d95d60 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -25,7 +25,6 @@ config PLAT_S5P
 	select S5P_GPIO_DRVSTR
 	select SAMSUNG_CLKSRC if !COMMON_CLK
 	select SAMSUNG_GPIOLIB_4BIT
-	select SAMSUNG_IRQ_VIC_TIMER
 	help
 	  Base platform code for Samsung's S5P series SoC.
 
@@ -79,14 +78,6 @@ config SAMSUNG_ATAGS
 
 if SAMSUNG_ATAGS
 
-# timer options
-
-config SAMSUNG_HRT
-	bool
-	select SAMSUNG_DEV_PWM
-	help
-	  Use the High Resolution timer support
-
 # clock options
 
 config SAMSUNG_CLOCK
@@ -106,11 +97,6 @@ config S5P_CLOCK
 
 # options for IRQ support
 
-config SAMSUNG_IRQ_VIC_TIMER
-       bool
-       help
-         Internal configuration to build the VIC timer interrupt code.
-
 config S5P_IRQ
 	def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
 	help
@@ -396,11 +382,6 @@ config S5P_DEV_TV
 	help
 	  Compile in platform device definition for TV interface
 
-config S5P_DEV_USB_EHCI
-	bool
-	help
-	  Compile in platform device definition for USB EHCI
-
 config S3C24XX_PWM
 	bool "PWM device support"
 	select PWM
@@ -409,11 +390,6 @@ config S3C24XX_PWM
 	  Support for exporting the PWM timer blocks via the pwm device
 	  system
 
-config S5P_SETUP_MIPIPHY
-	bool
-	help
-	  Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices
-
 config S3C_SETUP_CAMIF
 	bool
 	help
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 199bbe3..9267d29 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -12,15 +12,12 @@ obj-				:=
 # Objects we always build independent of SoC choice
 
 obj-y				+= init.o cpu.o
-obj-$(CONFIG_SAMSUNG_HRT) 	+= samsung-time.o
 
 obj-$(CONFIG_SAMSUNG_CLOCK)	+= clock.o
-obj-$(CONFIG_SAMSUNG_CLOCK)	+= pwm-clock.o
 
 obj-$(CONFIG_SAMSUNG_CLKSRC)	+= clock-clksrc.o
 obj-$(CONFIG_S5P_CLOCK)		+= s5p-clock.o
 
-obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o
 obj-$(CONFIG_S5P_IRQ)		+= s5p-irq.o
 obj-$(CONFIG_S5P_EXT_INT)	+= s5p-irq-eint.o
 obj-$(CONFIG_S5P_GPIO_INT)	+= s5p-irq-gpioint.o
@@ -41,7 +38,6 @@ obj-$(CONFIG_S5P_DEV_UART)	+= s5p-dev-uart.o
 obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight.o
 
 obj-$(CONFIG_S3C_SETUP_CAMIF)	+= setup-camif.o
-obj-$(CONFIG_S5P_SETUP_MIPIPHY)	+= setup-mipiphy.o
 
 # DMA support
 
diff --git a/arch/arm/plat-samsung/dev-backlight.c b/arch/arm/plat-samsung/dev-backlight.c
index 5f197dc..d51f956 100644
--- a/arch/arm/plat-samsung/dev-backlight.c
+++ b/arch/arm/plat-samsung/dev-backlight.c
@@ -20,13 +20,18 @@
 #include <plat/gpio-cfg.h>
 #include <plat/backlight.h>
 
+struct samsung_bl_drvdata {
+	struct platform_pwm_backlight_data plat_data;
+	struct samsung_bl_gpio_info *gpio_info;
+};
+
 static int samsung_bl_init(struct device *dev)
 {
 	int ret = 0;
-	struct platform_device *timer_dev =
-			container_of(dev->parent, struct platform_device, dev);
-	struct samsung_bl_gpio_info *bl_gpio_info =
-			timer_dev->dev.platform_data;
+	struct platform_pwm_backlight_data *pdata = dev->platform_data;
+	struct samsung_bl_drvdata *drvdata = container_of(pdata,
+					struct samsung_bl_drvdata, plat_data);
+	struct samsung_bl_gpio_info *bl_gpio_info = drvdata->gpio_info;
 
 	ret = gpio_request(bl_gpio_info->no, "Backlight");
 	if (ret) {
@@ -42,10 +47,10 @@ static int samsung_bl_init(struct device *dev)
 
 static void samsung_bl_exit(struct device *dev)
 {
-	struct platform_device *timer_dev =
-			container_of(dev->parent, struct platform_device, dev);
-	struct samsung_bl_gpio_info *bl_gpio_info =
-			timer_dev->dev.platform_data;
+	struct platform_pwm_backlight_data *pdata = dev->platform_data;
+	struct samsung_bl_drvdata *drvdata = container_of(pdata,
+					struct samsung_bl_drvdata, plat_data);
+	struct samsung_bl_gpio_info *bl_gpio_info = drvdata->gpio_info;
 
 	s3c_gpio_cfgpin(bl_gpio_info->no, S3C_GPIO_OUTPUT);
 	gpio_free(bl_gpio_info->no);
@@ -60,12 +65,14 @@ static void samsung_bl_exit(struct device *dev)
  * for their specific boards
  */
 
-static struct platform_pwm_backlight_data samsung_dfl_bl_data __initdata = {
-	.max_brightness = 255,
-	.dft_brightness = 255,
-	.pwm_period_ns  = 78770,
-	.init           = samsung_bl_init,
-	.exit           = samsung_bl_exit,
+static struct samsung_bl_drvdata samsung_dfl_bl_data __initdata = {
+	.plat_data = {
+		.max_brightness = 255,
+		.dft_brightness = 255,
+		.pwm_period_ns  = 78770,
+		.init           = samsung_bl_init,
+		.exit           = samsung_bl_exit,
+	},
 };
 
 static struct platform_device samsung_dfl_bl_device __initdata = {
@@ -82,6 +89,7 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
 {
 	int ret = 0;
 	struct platform_device *samsung_bl_device;
+	struct samsung_bl_drvdata *samsung_bl_drvdata;
 	struct platform_pwm_backlight_data *samsung_bl_data;
 
 	samsung_bl_device = kmemdup(&samsung_dfl_bl_device,
@@ -91,17 +99,19 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
 		return;
 	}
 
-	samsung_bl_data = s3c_set_platdata(&samsung_dfl_bl_data,
-		sizeof(struct platform_pwm_backlight_data), samsung_bl_device);
-	if (!samsung_bl_data) {
+	samsung_bl_drvdata = kmemdup(&samsung_dfl_bl_data,
+				sizeof(samsung_dfl_bl_data), GFP_KERNEL);
+	if (!samsung_bl_drvdata) {
 		printk(KERN_ERR "%s: no memory for platform dev\n", __func__);
 		goto err_data;
 	}
+	samsung_bl_device->dev.platform_data = &samsung_bl_drvdata->plat_data;
+	samsung_bl_drvdata->gpio_info = gpio_info;
+	samsung_bl_data = &samsung_bl_drvdata->plat_data;
 
 	/* Copy board specific data provided by user */
 	samsung_bl_data->pwm_id = bl_data->pwm_id;
-	samsung_bl_device->dev.parent =
-			&s3c_device_timer[samsung_bl_data->pwm_id].dev;
+	samsung_bl_device->dev.parent = &samsung_device_pwm.dev;
 
 	if (bl_data->max_brightness)
 		samsung_bl_data->max_brightness = bl_data->max_brightness;
@@ -122,17 +132,6 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
 	if (bl_data->check_fb)
 		samsung_bl_data->check_fb = bl_data->check_fb;
 
-	/* Keep the GPIO info for future use */
-	s3c_device_timer[samsung_bl_data->pwm_id].dev.platform_data = gpio_info;
-
-	/* Register the specific PWM timer dev for Backlight control */
-	ret = platform_device_register(
-			&s3c_device_timer[samsung_bl_data->pwm_id]);
-	if (ret) {
-		printk(KERN_ERR "failed to register pwm timer for backlight: %d\n", ret);
-		goto err_plat_reg1;
-	}
-
 	/* Register the Backlight dev */
 	ret = platform_device_register(samsung_bl_device);
 	if (ret) {
@@ -143,8 +142,6 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
 	return;
 
 err_plat_reg2:
-	platform_device_unregister(&s3c_device_timer[samsung_bl_data->pwm_id]);
-err_plat_reg1:
 	kfree(samsung_bl_data);
 err_data:
 	kfree(samsung_bl_device);
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 0f9c3f4..99a3590 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -32,6 +32,7 @@
 #include <linux/ioport.h>
 #include <linux/platform_data/s3c-hsudc.h>
 #include <linux/platform_data/s3c-hsotg.h>
+#include <linux/platform_data/dma-s3c24xx.h>
 
 #include <media/s5p_hdmi.h>
 
@@ -49,7 +50,6 @@
 #include <plat/devs.h>
 #include <plat/adc.h>
 #include <linux/platform_data/ata-samsung_cf.h>
-#include <linux/platform_data/usb-ehci-s5p.h>
 #include <plat/fb.h>
 #include <plat/fb-s3c2410.h>
 #include <plat/hdmi.h>
@@ -58,6 +58,7 @@
 #include <plat/keypad.h>
 #include <linux/platform_data/mmc-s3cmci.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <plat/pwm-core.h>
 #include <plat/sdhci.h>
 #include <linux/platform_data/touchscreen-s3c2410.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>
@@ -1097,36 +1098,21 @@ arch_initcall(s5p_pmu_init);
 /* PWM Timer */
 
 #ifdef CONFIG_SAMSUNG_DEV_PWM
+static struct resource samsung_pwm_resource[] = {
+	DEFINE_RES_MEM(SAMSUNG_PA_TIMER, SZ_4K),
+};
 
-#define TIMER_RESOURCE_SIZE (1)
-
-#define TIMER_RESOURCE(_tmr, _irq)			\
-	(struct resource [TIMER_RESOURCE_SIZE]) {	\
-		[0] = {					\
-			.start	= _irq,			\
-			.end	= _irq,			\
-			.flags	= IORESOURCE_IRQ	\
-		}					\
-	}
-
-#define DEFINE_S3C_TIMER(_tmr_no, _irq)			\
-	.name		= "s3c24xx-pwm",		\
-	.id		= _tmr_no,			\
-	.num_resources	= TIMER_RESOURCE_SIZE,		\
-	.resource	= TIMER_RESOURCE(_tmr_no, _irq),	\
-
-/*
- * since we already have an static mapping for the timer,
- * we do not bother setting any IO resource for the base.
- */
-
-struct platform_device s3c_device_timer[] = {
-	[0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) },
-	[1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) },
-	[2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) },
-	[3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) },
-	[4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) },
+struct platform_device samsung_device_pwm = {
+	.name		= "samsung-pwm",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(samsung_pwm_resource),
+	.resource	= samsung_pwm_resource,
 };
+
+void __init samsung_pwm_set_platdata(struct samsung_pwm_variant *pd)
+{
+	samsung_device_pwm.dev.platform_data = pd;
+}
 #endif /* CONFIG_SAMSUNG_DEV_PWM */
 
 /* RTC */
@@ -1373,39 +1359,6 @@ void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd)
 }
 #endif /* CONFIG_PLAT_S3C24XX */
 
-/* USB EHCI Host Controller */
-
-#ifdef CONFIG_S5P_DEV_USB_EHCI
-static struct resource s5p_ehci_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_EHCI, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_USB_HOST),
-};
-
-struct platform_device s5p_device_ehci = {
-	.name		= "s5p-ehci",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p_ehci_resource),
-	.resource	= s5p_ehci_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-
-void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd)
-{
-	struct s5p_ehci_platdata *npd;
-
-	npd = s3c_set_platdata(pd, sizeof(struct s5p_ehci_platdata),
-			&s5p_device_ehci);
-
-	if (!npd->phy_init)
-		npd->phy_init = s5p_usb_phy_init;
-	if (!npd->phy_exit)
-		npd->phy_exit = s5p_usb_phy_exit;
-}
-#endif /* CONFIG_S5P_DEV_USB_EHCI */
-
 /* USB HSOTG */
 
 #ifdef CONFIG_S3C_DEV_USB_HSOTG
@@ -1513,8 +1466,10 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
 	pd.num_cs = num_cs;
 	pd.src_clk_nr = src_clk_nr;
 	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio;
-#ifdef CONFIG_PL330_DMA
+#if defined(CONFIG_PL330_DMA)
 	pd.filter = pl330_filter;
+#elif defined(CONFIG_S3C24XX_DMAC)
+	pd.filter = s3c24xx_dma_filter;
 #endif
 
 	s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0);
diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h
index df45d6e..63239f4 100644
--- a/arch/arm/plat-samsung/include/plat/clock.h
+++ b/arch/arm/plat-samsung/include/plat/clock.h
@@ -145,10 +145,6 @@ extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable);
 
 extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable);
 
-/* Init for pwm clock code */
-
-extern void s3c_pwmclk_init(void);
-
 /* Global watchdog clock used by arch_wtd_reset() callback */
 
 extern struct clk *s3c2410_wdtclk;
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 4fb1f03..335beb3 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -87,8 +87,12 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
 #endif
 
 #if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
+# define soc_is_s3c6400()	is_samsung_s3c6400()
+# define soc_is_s3c6410()	is_samsung_s3c6410()
 # define soc_is_s3c64xx()	(is_samsung_s3c6400() || is_samsung_s3c6410())
 #else
+# define soc_is_s3c6400()	0
+# define soc_is_s3c6410()	0
 # define soc_is_s3c64xx()	0
 #endif
 
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 87d501f..eece188 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -75,7 +75,6 @@ extern struct platform_device s3c_device_usb_hsotg;
 extern struct platform_device s3c_device_usb_hsudc;
 extern struct platform_device s3c_device_wdt;
 
-extern struct platform_device s5p_device_ehci;
 extern struct platform_device s5p_device_fimc0;
 extern struct platform_device s5p_device_fimc1;
 extern struct platform_device s5p_device_fimc2;
@@ -134,6 +133,7 @@ extern struct platform_device exynos4_device_spdif;
 
 extern struct platform_device samsung_asoc_idma;
 extern struct platform_device samsung_device_keypad;
+extern struct platform_device samsung_device_pwm;
 
 /* s3c2440 specific devices */
 
diff --git a/arch/arm/plat-samsung/include/plat/irq-vic-timer.h b/arch/arm/plat-samsung/include/plat/irq-vic-timer.h
deleted file mode 100644
index 5b9c42f..0000000
--- a/arch/arm/plat-samsung/include/plat/irq-vic-timer.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/irq-vic-timer.h
- *
- * Copyright (c) 2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for Samsung SoC IRQ VIC timer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern void s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq);
diff --git a/arch/arm/plat-samsung/include/plat/irqs.h b/arch/arm/plat-samsung/include/plat/irqs.h
index df46b77..039001c 100644
--- a/arch/arm/plat-samsung/include/plat/irqs.h
+++ b/arch/arm/plat-samsung/include/plat/irqs.h
@@ -44,15 +44,6 @@
 #define S5P_IRQ_VIC2(x)		(S5P_VIC2_BASE + (x))
 #define S5P_IRQ_VIC3(x)		(S5P_VIC3_BASE + (x))
 
-#define S5P_TIMER_IRQ(x)	(IRQ_TIMER_BASE + (x))
-
-#define IRQ_TIMER0		S5P_TIMER_IRQ(0)
-#define IRQ_TIMER1		S5P_TIMER_IRQ(1)
-#define IRQ_TIMER2		S5P_TIMER_IRQ(2)
-#define IRQ_TIMER3		S5P_TIMER_IRQ(3)
-#define IRQ_TIMER4		S5P_TIMER_IRQ(4)
-#define IRQ_TIMER_COUNT		(5)
-
 #define IRQ_EINT(x)		((x) < 16 ? ((x) + S5P_EINT_BASE1) \
 					: ((x) - 16 + S5P_EINT_BASE2))
 
diff --git a/arch/arm/plat-samsung/include/plat/pwm-clock.h b/arch/arm/plat-samsung/include/plat/pwm-clock.h
deleted file mode 100644
index bf6a60e..0000000
--- a/arch/arm/plat-samsung/include/plat/pwm-clock.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/pwm-clock.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * SAMSUNG - pwm clock and timer support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_PWM_CLOCK_H
-#define __ASM_PLAT_PWM_CLOCK_H __FILE__
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
-	if (soc_is_s3c24xx())
-		return tcfg == S3C2410_TCFG1_MUX_TCLK;
-	else if (soc_is_s3c64xx() || soc_is_s5pc100())
-		return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
-	else if (soc_is_s5p6440() || soc_is_s5p6450())
-		return 0;
-	else
-		return tcfg == S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
-	if (soc_is_s3c24xx())
-		return 1 << (tcfg1 + 1);
-	else
-		return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
-	if (soc_is_s3c24xx())
-		return 0;
-	else
-		return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
-	if (soc_is_s3c24xx())
-		return ilog2(div) - 1;
-	else
-		return ilog2(div);
-}
-#endif /* __ASM_PLAT_PWM_CLOCK_H */
diff --git a/arch/arm/plat-samsung/include/plat/pwm-core.h b/arch/arm/plat-samsung/include/plat/pwm-core.h
new file mode 100644
index 0000000..5bff1fa
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/pwm-core.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung PWM controller platform data helpers.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_PWM_CORE_H
+#define __ASM_ARCH_PWM_CORE_H __FILE__
+
+#include <clocksource/samsung_pwm.h>
+
+#ifdef CONFIG_SAMSUNG_DEV_PWM
+extern void samsung_pwm_set_platdata(struct samsung_pwm_variant *pd);
+#else
+static inline void samsung_pwm_set_platdata(struct samsung_pwm_variant *pd) { }
+#endif
+
+#endif /* __ASM_ARCH_PWM_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/regs-timer.h b/arch/arm/plat-samsung/include/plat/regs-timer.h
deleted file mode 100644
index d097d92..0000000
--- a/arch/arm/plat-samsung/include/plat/regs-timer.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-timer.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Timer configuration
-*/
-
-#ifndef __ASM_ARCH_REGS_TIMER_H
-#define __ASM_ARCH_REGS_TIMER_H
-
-#define S3C_TIMERREG(x) (S3C_VA_TIMER + (x))
-#define S3C_TIMERREG2(tmr,reg) S3C_TIMERREG((reg)+0x0c+((tmr)*0x0c))
-
-#define S3C2410_TCFG0	      S3C_TIMERREG(0x00)
-#define S3C2410_TCFG1	      S3C_TIMERREG(0x04)
-#define S3C2410_TCON	      S3C_TIMERREG(0x08)
-
-#define S3C64XX_TINT_CSTAT    S3C_TIMERREG(0x44)
-
-#define S3C2410_TCFG_PRESCALER0_MASK (255<<0)
-#define S3C2410_TCFG_PRESCALER1_MASK (255<<8)
-#define S3C2410_TCFG_PRESCALER1_SHIFT (8)
-#define S3C2410_TCFG_DEADZONE_MASK   (255<<16)
-#define S3C2410_TCFG_DEADZONE_SHIFT  (16)
-
-#define S3C2410_TCFG1_MUX4_DIV2	  (0<<16)
-#define S3C2410_TCFG1_MUX4_DIV4	  (1<<16)
-#define S3C2410_TCFG1_MUX4_DIV8	  (2<<16)
-#define S3C2410_TCFG1_MUX4_DIV16  (3<<16)
-#define S3C2410_TCFG1_MUX4_TCLK1  (4<<16)
-#define S3C2410_TCFG1_MUX4_MASK	  (15<<16)
-#define S3C2410_TCFG1_MUX4_SHIFT  (16)
-
-#define S3C2410_TCFG1_MUX3_DIV2	  (0<<12)
-#define S3C2410_TCFG1_MUX3_DIV4	  (1<<12)
-#define S3C2410_TCFG1_MUX3_DIV8	  (2<<12)
-#define S3C2410_TCFG1_MUX3_DIV16  (3<<12)
-#define S3C2410_TCFG1_MUX3_TCLK1  (4<<12)
-#define S3C2410_TCFG1_MUX3_MASK	  (15<<12)
-
-
-#define S3C2410_TCFG1_MUX2_DIV2	  (0<<8)
-#define S3C2410_TCFG1_MUX2_DIV4	  (1<<8)
-#define S3C2410_TCFG1_MUX2_DIV8	  (2<<8)
-#define S3C2410_TCFG1_MUX2_DIV16  (3<<8)
-#define S3C2410_TCFG1_MUX2_TCLK1  (4<<8)
-#define S3C2410_TCFG1_MUX2_MASK	  (15<<8)
-
-
-#define S3C2410_TCFG1_MUX1_DIV2	  (0<<4)
-#define S3C2410_TCFG1_MUX1_DIV4	  (1<<4)
-#define S3C2410_TCFG1_MUX1_DIV8	  (2<<4)
-#define S3C2410_TCFG1_MUX1_DIV16  (3<<4)
-#define S3C2410_TCFG1_MUX1_TCLK0  (4<<4)
-#define S3C2410_TCFG1_MUX1_MASK	  (15<<4)
-
-#define S3C2410_TCFG1_MUX0_DIV2	  (0<<0)
-#define S3C2410_TCFG1_MUX0_DIV4	  (1<<0)
-#define S3C2410_TCFG1_MUX0_DIV8	  (2<<0)
-#define S3C2410_TCFG1_MUX0_DIV16  (3<<0)
-#define S3C2410_TCFG1_MUX0_TCLK0  (4<<0)
-#define S3C2410_TCFG1_MUX0_MASK	  (15<<0)
-
-#define S3C2410_TCFG1_MUX_DIV2	  (0<<0)
-#define S3C2410_TCFG1_MUX_DIV4	  (1<<0)
-#define S3C2410_TCFG1_MUX_DIV8	  (2<<0)
-#define S3C2410_TCFG1_MUX_DIV16   (3<<0)
-#define S3C2410_TCFG1_MUX_TCLK    (4<<0)
-#define S3C2410_TCFG1_MUX_MASK	  (15<<0)
-
-#define S3C64XX_TCFG1_MUX_DIV1	  (0<<0)
-#define S3C64XX_TCFG1_MUX_DIV2	  (1<<0)
-#define S3C64XX_TCFG1_MUX_DIV4	  (2<<0)
-#define S3C64XX_TCFG1_MUX_DIV8    (3<<0)
-#define S3C64XX_TCFG1_MUX_DIV16   (4<<0)
-#define S3C64XX_TCFG1_MUX_TCLK    (5<<0)  /* 3 sets of TCLK */
-#define S3C64XX_TCFG1_MUX_MASK	  (15<<0)
-
-#define S3C2410_TCFG1_SHIFT(x)	  ((x) * 4)
-
-/* for each timer, we have an count buffer, an compare buffer and
- * an observation buffer
-*/
-
-/* WARNING - timer 4 has no buffer reg, and it's observation is at +4 */
-
-#define S3C2410_TCNTB(tmr)    S3C_TIMERREG2(tmr, 0x00)
-#define S3C2410_TCMPB(tmr)    S3C_TIMERREG2(tmr, 0x04)
-#define S3C2410_TCNTO(tmr)    S3C_TIMERREG2(tmr, (((tmr) == 4) ? 0x04 : 0x08))
-
-#define S3C2410_TCON_T4RELOAD	  (1<<22)
-#define S3C2410_TCON_T4MANUALUPD  (1<<21)
-#define S3C2410_TCON_T4START	  (1<<20)
-
-#define S3C2410_TCON_T3RELOAD	  (1<<19)
-#define S3C2410_TCON_T3INVERT	  (1<<18)
-#define S3C2410_TCON_T3MANUALUPD  (1<<17)
-#define S3C2410_TCON_T3START	  (1<<16)
-
-#define S3C2410_TCON_T2RELOAD	  (1<<15)
-#define S3C2410_TCON_T2INVERT	  (1<<14)
-#define S3C2410_TCON_T2MANUALUPD  (1<<13)
-#define S3C2410_TCON_T2START	  (1<<12)
-
-#define S3C2410_TCON_T1RELOAD	  (1<<11)
-#define S3C2410_TCON_T1INVERT	  (1<<10)
-#define S3C2410_TCON_T1MANUALUPD  (1<<9)
-#define S3C2410_TCON_T1START	  (1<<8)
-
-#define S3C2410_TCON_T0DEADZONE	  (1<<4)
-#define S3C2410_TCON_T0RELOAD	  (1<<3)
-#define S3C2410_TCON_T0INVERT	  (1<<2)
-#define S3C2410_TCON_T0MANUALUPD  (1<<1)
-#define S3C2410_TCON_T0START	  (1<<0)
-
-#endif /*  __ASM_ARCH_REGS_TIMER_H */
-
-
-
diff --git a/arch/arm/plat-samsung/include/plat/samsung-time.h b/arch/arm/plat-samsung/include/plat/samsung-time.h
index 4cc99bb..209464a 100644
--- a/arch/arm/plat-samsung/include/plat/samsung-time.h
+++ b/arch/arm/plat-samsung/include/plat/samsung-time.h
@@ -22,29 +22,6 @@ enum samsung_timer_mode {
 	SAMSUNG_PWM4,
 };
 
-struct samsung_timer_source {
-	unsigned int event_id;
-	unsigned int source_id;
-};
-
-/* Be able to sleep for atleast 4 seconds (usually more) */
-#define SAMSUNG_TIMER_MIN_RANGE	4
-
-#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S5PC100)
-#define TCNT_MAX		0xffff
-#define TSCALER_DIV		25
-#define TDIV			50
-#define TSIZE			16
-#else
-#define TCNT_MAX		0xffffffff
-#define TSCALER_DIV		2
-#define TDIV			2
-#define TSIZE			32
-#endif
-
-#define NON_PERIODIC		0
-#define PERIODIC		1
-
 extern void __init samsung_set_timer_source(enum samsung_timer_mode event,
 					enum samsung_timer_mode source);
 
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index ce1d0f7..bf65021 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -260,44 +260,6 @@ static inline void s5pv210_default_sdhci3(void) { }
 
 #endif /* CONFIG_S5PV210_SETUP_SDHCI */
 
-/* EXYNOS4 SDHCI setup */
-#ifdef CONFIG_EXYNOS4_SETUP_SDHCI
-static inline void exynos4_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
-	s3c_hsmmc0_def_platdata.cfg_gpio = exynos4_setup_sdhci0_cfg_gpio;
-#endif
-}
-
-static inline void exynos4_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
-	s3c_hsmmc1_def_platdata.cfg_gpio = exynos4_setup_sdhci1_cfg_gpio;
-#endif
-}
-
-static inline void exynos4_default_sdhci2(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC2
-	s3c_hsmmc2_def_platdata.cfg_gpio = exynos4_setup_sdhci2_cfg_gpio;
-#endif
-}
-
-static inline void exynos4_default_sdhci3(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC3
-	s3c_hsmmc3_def_platdata.cfg_gpio = exynos4_setup_sdhci3_cfg_gpio;
-#endif
-}
-
-#else
-static inline void exynos4_default_sdhci0(void) { }
-static inline void exynos4_default_sdhci1(void) { }
-static inline void exynos4_default_sdhci2(void) { }
-static inline void exynos4_default_sdhci3(void) { }
-
-#endif /* CONFIG_EXYNOS4_SETUP_SDHCI */
-
 static inline void s3c_sdhci_setname(int id, char *name)
 {
 	switch (id) {
diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c
index 50a3ea0..aa9511b 100644
--- a/arch/arm/plat-samsung/init.c
+++ b/arch/arm/plat-samsung/init.c
@@ -11,12 +11,18 @@
  * published by the Free Software Foundation.
 */
 
+/*
+ * NOTE: Code in this file is not used on S3C64xx when booting with
+ * Device Tree support.
+ */
+
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 
 #include <mach/hardware.h>
 
@@ -148,8 +154,12 @@ static int __init s3c_arch_init(void)
 
 	// do the correct init for cpu
 
-	if (cpu == NULL)
+	if (cpu == NULL) {
+		/* Not needed when booting with device tree. */
+		if (of_have_populated_dt())
+			return 0;
 		panic("s3c_arch_init: NULL cpu\n");
+	}
 
 	ret = (cpu->init)();
 	if (ret != 0)
diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c
deleted file mode 100644
index 0fceb42..0000000
--- a/arch/arm/plat-samsung/irq-vic-timer.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/* arch/arm/plat-samsung/irq-vic-timer.c
- *	originally part of arch/arm/plat-s3c64xx/irq.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - Interrupt handling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/irqchip/chained_irq.h>
-#include <linux/io.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <plat/cpu.h>
-#include <plat/irq-vic-timer.h>
-#include <plat/regs-timer.h>
-
-static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_get_chip(irq);
-	chained_irq_enter(chip, desc);
-	generic_handle_irq((int)desc->irq_data.handler_data);
-	chained_irq_exit(chip, desc);
-}
-
-/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
-static void s3c_irq_timer_ack(struct irq_data *d)
-{
-	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
-	u32 mask = (1 << 5) << (d->irq - gc->irq_base);
-
-	irq_reg_writel(mask | gc->mask_cache, gc->reg_base);
-}
-
-/**
- * s3c_init_vic_timer_irq() - initialise timer irq chanined off VIC.\
- * @num: Number of timers to initialize
- * @timer_irq: Base IRQ number to be used for the timers.
- *
- * Register the necessary IRQ chaining and support for the timer IRQs
- * chained of the VIC.
- */
-void __init s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq)
-{
-	unsigned int pirq[5] = { IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
-				 IRQ_TIMER3_VIC, IRQ_TIMER4_VIC };
-	struct irq_chip_generic *s3c_tgc;
-	struct irq_chip_type *ct;
-	unsigned int i;
-
-#ifdef CONFIG_ARCH_EXYNOS
-	if (soc_is_exynos5250()) {
-		pirq[0] = EXYNOS5_IRQ_TIMER0_VIC;
-		pirq[1] = EXYNOS5_IRQ_TIMER1_VIC;
-		pirq[2] = EXYNOS5_IRQ_TIMER2_VIC;
-		pirq[3] = EXYNOS5_IRQ_TIMER3_VIC;
-		pirq[4] = EXYNOS5_IRQ_TIMER4_VIC;
-	} else {
-		pirq[0] = EXYNOS4_IRQ_TIMER0_VIC;
-		pirq[1] = EXYNOS4_IRQ_TIMER1_VIC;
-		pirq[2] = EXYNOS4_IRQ_TIMER2_VIC;
-		pirq[3] = EXYNOS4_IRQ_TIMER3_VIC;
-		pirq[4] = EXYNOS4_IRQ_TIMER4_VIC;
-	}
-#endif
-	s3c_tgc = irq_alloc_generic_chip("s3c-timer", 1, timer_irq,
-					 S3C64XX_TINT_CSTAT, handle_level_irq);
-
-	if (!s3c_tgc) {
-		pr_err("%s: irq_alloc_generic_chip for IRQ %d failed\n",
-		       __func__, timer_irq);
-		return;
-	}
-
-	ct = s3c_tgc->chip_types;
-	ct->chip.irq_mask = irq_gc_mask_clr_bit;
-	ct->chip.irq_unmask = irq_gc_mask_set_bit;
-	ct->chip.irq_ack = s3c_irq_timer_ack;
-	irq_setup_generic_chip(s3c_tgc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
-			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
-	/* Clear the upper bits of the mask_cache*/
-	s3c_tgc->mask_cache &= 0x1f;
-
-	for (i = 0; i < num; i++, timer_irq++) {
-		irq_set_chained_handler(pirq[i], s3c_irq_demux_vic_timer);
-		irq_set_handler_data(pirq[i], (void *)timer_irq);
-	}
-}
diff --git a/arch/arm/plat-samsung/pwm-clock.c b/arch/arm/plat-samsung/pwm-clock.c
deleted file mode 100644
index a35ff3b..0000000
--- a/arch/arm/plat-samsung/pwm-clock.c
+++ /dev/null
@@ -1,474 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/pwm-clock.c
- *
- * Copyright (c) 2007 Simtec Electronics
- * Copyright (c) 2007, 2008 Ben Dooks
- *	Ben Dooks <ben-linux@fluff.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/log2.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <asm/irq.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-#include <plat/regs-timer.h>
-#include <plat/pwm-clock.h>
-
-/* Each of the timers 0 through 5 go through the following
- * clock tree, with the inputs depending on the timers.
- *
- * pclk ---- [ prescaler 0 ] -+---> timer 0
- *			      +---> timer 1
- *
- * pclk ---- [ prescaler 1 ] -+---> timer 2
- *			      +---> timer 3
- *			      \---> timer 4
- *
- * Which are fed into the timers as so:
- *
- * prescaled 0 ---- [ div 2,4,8,16 ] ---\
- *				       [mux] -> timer 0
- * tclk 0 ------------------------------/
- *
- * prescaled 0 ---- [ div 2,4,8,16 ] ---\
- *				       [mux] -> timer 1
- * tclk 0 ------------------------------/
- *
- *
- * prescaled 1 ---- [ div 2,4,8,16 ] ---\
- *				       [mux] -> timer 2
- * tclk 1 ------------------------------/
- *
- * prescaled 1 ---- [ div 2,4,8,16 ] ---\
- *				       [mux] -> timer 3
- * tclk 1 ------------------------------/
- *
- * prescaled 1 ---- [ div 2,4,8, 16 ] --\
- *				       [mux] -> timer 4
- * tclk 1 ------------------------------/
- *
- * Since the mux and the divider are tied together in the
- * same register space, it is impossible to set the parent
- * and the rate at the same time. To avoid this, we add an
- * intermediate 'prescaled-and-divided' clock to select
- * as the parent for the timer input clock called tdiv.
- *
- * prescaled clk --> pwm-tdiv ---\
- *                             [ mux ] --> timer X
- * tclk -------------------------/
-*/
-
-static struct clk clk_timer_scaler[];
-
-static unsigned long clk_pwm_scaler_get_rate(struct clk *clk)
-{
-	unsigned long tcfg0 = __raw_readl(S3C2410_TCFG0);
-
-	if (clk == &clk_timer_scaler[1]) {
-		tcfg0 &= S3C2410_TCFG_PRESCALER1_MASK;
-		tcfg0 >>= S3C2410_TCFG_PRESCALER1_SHIFT;
-	} else {
-		tcfg0 &= S3C2410_TCFG_PRESCALER0_MASK;
-	}
-
-	return clk_get_rate(clk->parent) / (tcfg0 + 1);
-}
-
-static unsigned long clk_pwm_scaler_round_rate(struct clk *clk,
-					       unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long divisor = parent_rate / rate;
-
-	if (divisor > 256)
-		divisor = 256;
-	else if (divisor < 2)
-		divisor = 2;
-
-	return parent_rate / divisor;
-}
-
-static int clk_pwm_scaler_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long round = clk_pwm_scaler_round_rate(clk, rate);
-	unsigned long tcfg0;
-	unsigned long divisor;
-	unsigned long flags;
-
-	divisor = clk_get_rate(clk->parent) / round;
-	divisor--;
-
-	local_irq_save(flags);
-	tcfg0 = __raw_readl(S3C2410_TCFG0);
-
-	if (clk == &clk_timer_scaler[1]) {
-		tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
-		tcfg0 |= divisor << S3C2410_TCFG_PRESCALER1_SHIFT;
-	} else {
-		tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK;
-		tcfg0 |= divisor;
-	}
-
-	__raw_writel(tcfg0, S3C2410_TCFG0);
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static struct clk_ops clk_pwm_scaler_ops = {
-	.get_rate	= clk_pwm_scaler_get_rate,
-	.set_rate	= clk_pwm_scaler_set_rate,
-	.round_rate	= clk_pwm_scaler_round_rate,
-};
-
-static struct clk clk_timer_scaler[] = {
-	[0]	= {
-		.name		= "pwm-scaler0",
-		.id		= -1,
-		.ops		= &clk_pwm_scaler_ops,
-	},
-	[1]	= {
-		.name		= "pwm-scaler1",
-		.id		= -1,
-		.ops		= &clk_pwm_scaler_ops,
-	},
-};
-
-static struct clk clk_timer_tclk[] = {
-	[0]	= {
-		.name		= "pwm-tclk0",
-		.id		= -1,
-	},
-	[1]	= {
-		.name		= "pwm-tclk1",
-		.id		= -1,
-	},
-};
-
-struct pwm_tdiv_clk {
-	struct clk	clk;
-	unsigned int	divisor;
-};
-
-static inline struct pwm_tdiv_clk *to_tdiv(struct clk *clk)
-{
-	return container_of(clk, struct pwm_tdiv_clk, clk);
-}
-
-static unsigned long clk_pwm_tdiv_get_rate(struct clk *clk)
-{
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-	unsigned int divisor;
-
-	tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
-	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
-	if (pwm_cfg_src_is_tclk(tcfg1))
-		divisor = to_tdiv(clk)->divisor;
-	else
-		divisor = tcfg_to_divisor(tcfg1);
-
-	return clk_get_rate(clk->parent) / divisor;
-}
-
-static unsigned long clk_pwm_tdiv_round_rate(struct clk *clk,
-					     unsigned long rate)
-{
-	unsigned long parent_rate;
-	unsigned long divisor;
-
-	parent_rate = clk_get_rate(clk->parent);
-	divisor = parent_rate / rate;
-
-	if (divisor <= 1 && pwm_tdiv_has_div1())
-		divisor = 1;
-	else if (divisor <= 2)
-		divisor = 2;
-	else if (divisor <= 4)
-		divisor = 4;
-	else if (divisor <= 8)
-		divisor = 8;
-	else
-		divisor = 16;
-
-	return parent_rate / divisor;
-}
-
-static unsigned long clk_pwm_tdiv_bits(struct pwm_tdiv_clk *divclk)
-{
-	return pwm_tdiv_div_bits(divclk->divisor);
-}
-
-static void clk_pwm_tdiv_update(struct pwm_tdiv_clk *divclk)
-{
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-	unsigned long bits = clk_pwm_tdiv_bits(divclk);
-	unsigned long flags;
-	unsigned long shift =  S3C2410_TCFG1_SHIFT(divclk->clk.id);
-
-	local_irq_save(flags);
-
-	tcfg1 = __raw_readl(S3C2410_TCFG1);
-	tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
-	tcfg1 |= bits << shift;
-	__raw_writel(tcfg1, S3C2410_TCFG1);
-
-	local_irq_restore(flags);
-}
-
-static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate)
-{
-	struct pwm_tdiv_clk *divclk = to_tdiv(clk);
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long divisor;
-
-	tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
-	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
-	rate = clk_round_rate(clk, rate);
-	divisor = parent_rate / rate;
-
-	if (divisor > 16)
-		return -EINVAL;
-
-	divclk->divisor = divisor;
-
-	/* Update the current MUX settings if we are currently
-	 * selected as the clock source for this clock. */
-
-	if (!pwm_cfg_src_is_tclk(tcfg1))
-		clk_pwm_tdiv_update(divclk);
-
-	return 0;
-}
-
-static struct clk_ops clk_tdiv_ops = {
-	.get_rate	= clk_pwm_tdiv_get_rate,
-	.set_rate	= clk_pwm_tdiv_set_rate,
-	.round_rate	= clk_pwm_tdiv_round_rate,
-};
-
-static struct pwm_tdiv_clk clk_timer_tdiv[] = {
-	[0]	= {
-		.clk	= {
-			.name	= "pwm-tdiv",
-			.devname	= "s3c24xx-pwm.0",
-			.ops	= &clk_tdiv_ops,
-			.parent	= &clk_timer_scaler[0],
-		},
-	},
-	[1]	= {
-		.clk	= {
-			.name	= "pwm-tdiv",
-			.devname	= "s3c24xx-pwm.1",
-			.ops	= &clk_tdiv_ops,
-			.parent	= &clk_timer_scaler[0],
-		}
-	},
-	[2]	= {
-		.clk	= {
-			.name	= "pwm-tdiv",
-			.devname	= "s3c24xx-pwm.2",
-			.ops	= &clk_tdiv_ops,
-			.parent	= &clk_timer_scaler[1],
-		},
-	},
-	[3]	= {
-		.clk	= {
-			.name	= "pwm-tdiv",
-			.devname	= "s3c24xx-pwm.3",
-			.ops	= &clk_tdiv_ops,
-			.parent	= &clk_timer_scaler[1],
-		},
-	},
-	[4]	= {
-		.clk	= {
-			.name	= "pwm-tdiv",
-			.devname	= "s3c24xx-pwm.4",
-			.ops	= &clk_tdiv_ops,
-			.parent	= &clk_timer_scaler[1],
-		},
-	},
-};
-
-static int __init clk_pwm_tdiv_register(unsigned int id)
-{
-	struct pwm_tdiv_clk *divclk = &clk_timer_tdiv[id];
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-
-	tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
-	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
-	divclk->clk.id = id;
-	divclk->divisor = tcfg_to_divisor(tcfg1);
-
-	return s3c24xx_register_clock(&divclk->clk);
-}
-
-static inline struct clk *s3c24xx_pwmclk_tclk(unsigned int id)
-{
-	return (id >= 2) ? &clk_timer_tclk[1] : &clk_timer_tclk[0];
-}
-
-static inline struct clk *s3c24xx_pwmclk_tdiv(unsigned int id)
-{
-	return &clk_timer_tdiv[id].clk;
-}
-
-static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent)
-{
-	unsigned int id = clk->id;
-	unsigned long tcfg1;
-	unsigned long flags;
-	unsigned long bits;
-	unsigned long shift = S3C2410_TCFG1_SHIFT(id);
-
-	unsigned long mux_tclk;
-
-	if (soc_is_s3c24xx())
-		mux_tclk = S3C2410_TCFG1_MUX_TCLK;
-	else if (soc_is_s5p6440() || soc_is_s5p6450())
-		mux_tclk = 0;
-	else
-		mux_tclk = S3C64XX_TCFG1_MUX_TCLK;
-
-	if (parent == s3c24xx_pwmclk_tclk(id))
-		bits = mux_tclk << shift;
-	else if (parent == s3c24xx_pwmclk_tdiv(id))
-		bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	local_irq_save(flags);
-
-	tcfg1 = __raw_readl(S3C2410_TCFG1);
-	tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
-	__raw_writel(tcfg1 | bits, S3C2410_TCFG1);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static struct clk_ops clk_tin_ops = {
-	.set_parent	= clk_pwm_tin_set_parent,
-};
-
-static struct clk clk_tin[] = {
-	[0]	= {
-		.name	= "pwm-tin",
-		.devname	= "s3c24xx-pwm.0",
-		.id	= 0,
-		.ops	= &clk_tin_ops,
-	},
-	[1]	= {
-		.name	= "pwm-tin",
-		.devname	= "s3c24xx-pwm.1",
-		.id	= 1,
-		.ops	= &clk_tin_ops,
-	},
-	[2]	= {
-		.name	= "pwm-tin",
-		.devname	= "s3c24xx-pwm.2",
-		.id	= 2,
-		.ops	= &clk_tin_ops,
-	},
-	[3]	= {
-		.name	= "pwm-tin",
-		.devname	= "s3c24xx-pwm.3",
-		.id	= 3,
-		.ops	= &clk_tin_ops,
-	},
-	[4]	= {
-		.name	= "pwm-tin",
-		.devname	= "s3c24xx-pwm.4",
-		.id	= 4,
-		.ops	= &clk_tin_ops,
-	},
-};
-
-static __init int clk_pwm_tin_register(struct clk *pwm)
-{
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-	unsigned int id = pwm->id;
-
-	struct clk *parent;
-	int ret;
-
-	ret = s3c24xx_register_clock(pwm);
-	if (ret < 0)
-		return ret;
-
-	tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
-	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
-	if (pwm_cfg_src_is_tclk(tcfg1))
-		parent = s3c24xx_pwmclk_tclk(id);
-	else
-		parent = s3c24xx_pwmclk_tdiv(id);
-
-	return clk_set_parent(pwm, parent);
-}
-
-/**
- * s3c_pwmclk_init() - initialise pwm clocks
- *
- * Initialise and register the clocks which provide the inputs for the
- * pwm timer blocks.
- *
- * Note, this call is required by the time core, so must be called after
- * the base clocks are added and before any of the initcalls are run.
- */
-__init void s3c_pwmclk_init(void)
-{
-	struct clk *clk_timers;
-	unsigned int clk;
-	int ret;
-
-	clk_timers = clk_get(NULL, "timers");
-	if (IS_ERR(clk_timers)) {
-		printk(KERN_ERR "%s: no parent clock\n", __func__);
-		return;
-	}
-
-	for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++)
-		clk_timer_scaler[clk].parent = clk_timers;
-
-	s3c_register_clocks(clk_timer_scaler, ARRAY_SIZE(clk_timer_scaler));
-	s3c_register_clocks(clk_timer_tclk, ARRAY_SIZE(clk_timer_tclk));
-
-	for (clk = 0; clk < ARRAY_SIZE(clk_timer_tdiv); clk++) {
-		ret = clk_pwm_tdiv_register(clk);
-
-		if (ret < 0) {
-			printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk);
-			return;
-		}
-	}
-
-	for (clk = 0; clk < ARRAY_SIZE(clk_tin); clk++) {
-		ret = clk_pwm_tin_register(&clk_tin[clk]);
-		if (ret < 0) {
-			printk(KERN_ERR "error adding pwm%d tin clock\n", clk);
-			return;
-		}
-	}
-}
diff --git a/arch/arm/plat-samsung/s3c-dma-ops.c b/arch/arm/plat-samsung/s3c-dma-ops.c
index 0cc40ae..98b10ba 100644
--- a/arch/arm/plat-samsung/s3c-dma-ops.c
+++ b/arch/arm/plat-samsung/s3c-dma-ops.c
@@ -82,7 +82,8 @@ static int s3c_dma_config(unsigned ch, struct samsung_dma_config *param)
 static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep *param)
 {
 	struct cb_data *data;
-	int len = (param->cap == DMA_CYCLIC) ? param->period : param->len;
+	dma_addr_t pos = param->buf;
+	dma_addr_t end = param->buf + param->len;
 
 	list_for_each_entry(data, &dma_list, node)
 		if (data->ch == ch)
@@ -94,7 +95,15 @@ static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep *param)
 		data->fp_param = param->fp_param;
 	}
 
-	s3c2410_dma_enqueue(ch, (void *)data, param->buf, len);
+	if (param->cap != DMA_CYCLIC) {
+		s3c2410_dma_enqueue(ch, (void *)data, param->buf, param->len);
+		return 0;
+	}
+
+	while (pos < end) {
+		s3c2410_dma_enqueue(ch, (void *)data, pos, param->period);
+		pos += param->period;
+	}
 
 	return 0;
 }
diff --git a/arch/arm/plat-samsung/s5p-irq.c b/arch/arm/plat-samsung/s5p-irq.c
index ff1a760..ddfaca9 100644
--- a/arch/arm/plat-samsung/s5p-irq.c
+++ b/arch/arm/plat-samsung/s5p-irq.c
@@ -17,9 +17,7 @@
 
 #include <mach/irqs.h>
 #include <mach/map.h>
-#include <plat/regs-timer.h>
 #include <plat/cpu.h>
-#include <plat/irq-vic-timer.h>
 
 void __init s5p_init_irq(u32 *vic, u32 num_vic)
 {
@@ -30,6 +28,4 @@ void __init s5p_init_irq(u32 *vic, u32 num_vic)
 	for (irq = 0; irq < num_vic; irq++)
 		vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0);
 #endif
-
-	s3c_init_vic_timer_irq(5, IRQ_TIMER0);
 }
diff --git a/arch/arm/plat-samsung/samsung-time.c b/arch/arm/plat-samsung/samsung-time.c
deleted file mode 100644
index 2957075..0000000
--- a/arch/arm/plat-samsung/samsung-time.c
+++ /dev/null
@@ -1,394 +0,0 @@
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * samsung - Common hr-timer support (s3c and s5p)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/clockchips.h>
-#include <linux/platform_device.h>
-#include <linux/sched_clock.h>
-
-#include <asm/smp_twd.h>
-#include <asm/mach/time.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/map.h>
-#include <plat/devs.h>
-#include <plat/regs-timer.h>
-#include <plat/samsung-time.h>
-
-static struct clk *tin_event;
-static struct clk *tin_source;
-static struct clk *tdiv_event;
-static struct clk *tdiv_source;
-static struct clk *timerclk;
-static struct samsung_timer_source timer_source;
-static unsigned long clock_count_per_tick;
-static void samsung_timer_resume(void);
-
-static void samsung_time_stop(enum samsung_timer_mode mode)
-{
-	unsigned long tcon;
-
-	tcon = __raw_readl(S3C2410_TCON);
-
-	switch (mode) {
-	case SAMSUNG_PWM0:
-		tcon &= ~S3C2410_TCON_T0START;
-		break;
-
-	case SAMSUNG_PWM1:
-		tcon &= ~S3C2410_TCON_T1START;
-		break;
-
-	case SAMSUNG_PWM2:
-		tcon &= ~S3C2410_TCON_T2START;
-		break;
-
-	case SAMSUNG_PWM3:
-		tcon &= ~S3C2410_TCON_T3START;
-		break;
-
-	case SAMSUNG_PWM4:
-		tcon &= ~S3C2410_TCON_T4START;
-		break;
-
-	default:
-		printk(KERN_ERR "Invalid Timer %d\n", mode);
-		break;
-	}
-	__raw_writel(tcon, S3C2410_TCON);
-}
-
-static void samsung_time_setup(enum samsung_timer_mode mode, unsigned long tcnt)
-{
-	unsigned long tcon;
-
-	tcon = __raw_readl(S3C2410_TCON);
-
-	tcnt--;
-
-	switch (mode) {
-	case SAMSUNG_PWM0:
-		tcon &= ~(0x0f << 0);
-		tcon |= S3C2410_TCON_T0MANUALUPD;
-		break;
-
-	case SAMSUNG_PWM1:
-		tcon &= ~(0x0f << 8);
-		tcon |= S3C2410_TCON_T1MANUALUPD;
-		break;
-
-	case SAMSUNG_PWM2:
-		tcon &= ~(0x0f << 12);
-		tcon |= S3C2410_TCON_T2MANUALUPD;
-		break;
-
-	case SAMSUNG_PWM3:
-		tcon &= ~(0x0f << 16);
-		tcon |= S3C2410_TCON_T3MANUALUPD;
-		break;
-
-	case SAMSUNG_PWM4:
-		tcon &= ~(0x07 << 20);
-		tcon |= S3C2410_TCON_T4MANUALUPD;
-		break;
-
-	default:
-		printk(KERN_ERR "Invalid Timer %d\n", mode);
-		break;
-	}
-
-	__raw_writel(tcnt, S3C2410_TCNTB(mode));
-	__raw_writel(tcnt, S3C2410_TCMPB(mode));
-	__raw_writel(tcon, S3C2410_TCON);
-}
-
-static void samsung_time_start(enum samsung_timer_mode mode, bool periodic)
-{
-	unsigned long tcon;
-
-	tcon  = __raw_readl(S3C2410_TCON);
-
-	switch (mode) {
-	case SAMSUNG_PWM0:
-		tcon |= S3C2410_TCON_T0START;
-		tcon &= ~S3C2410_TCON_T0MANUALUPD;
-
-		if (periodic)
-			tcon |= S3C2410_TCON_T0RELOAD;
-		else
-			tcon &= ~S3C2410_TCON_T0RELOAD;
-		break;
-
-	case SAMSUNG_PWM1:
-		tcon |= S3C2410_TCON_T1START;
-		tcon &= ~S3C2410_TCON_T1MANUALUPD;
-
-		if (periodic)
-			tcon |= S3C2410_TCON_T1RELOAD;
-		else
-			tcon &= ~S3C2410_TCON_T1RELOAD;
-		break;
-
-	case SAMSUNG_PWM2:
-		tcon |= S3C2410_TCON_T2START;
-		tcon &= ~S3C2410_TCON_T2MANUALUPD;
-
-		if (periodic)
-			tcon |= S3C2410_TCON_T2RELOAD;
-		else
-			tcon &= ~S3C2410_TCON_T2RELOAD;
-		break;
-
-	case SAMSUNG_PWM3:
-		tcon |= S3C2410_TCON_T3START;
-		tcon &= ~S3C2410_TCON_T3MANUALUPD;
-
-		if (periodic)
-			tcon |= S3C2410_TCON_T3RELOAD;
-		else
-			tcon &= ~S3C2410_TCON_T3RELOAD;
-		break;
-
-	case SAMSUNG_PWM4:
-		tcon |= S3C2410_TCON_T4START;
-		tcon &= ~S3C2410_TCON_T4MANUALUPD;
-
-		if (periodic)
-			tcon |= S3C2410_TCON_T4RELOAD;
-		else
-			tcon &= ~S3C2410_TCON_T4RELOAD;
-		break;
-
-	default:
-		printk(KERN_ERR "Invalid Timer %d\n", mode);
-		break;
-	}
-	__raw_writel(tcon, S3C2410_TCON);
-}
-
-static int samsung_set_next_event(unsigned long cycles,
-				struct clock_event_device *evt)
-{
-	samsung_time_setup(timer_source.event_id, cycles);
-	samsung_time_start(timer_source.event_id, NON_PERIODIC);
-
-	return 0;
-}
-
-static void samsung_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *evt)
-{
-	samsung_time_stop(timer_source.event_id);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		samsung_time_setup(timer_source.event_id, clock_count_per_tick);
-		samsung_time_start(timer_source.event_id, PERIODIC);
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-		break;
-
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		break;
-
-	case CLOCK_EVT_MODE_RESUME:
-		samsung_timer_resume();
-		break;
-	}
-}
-
-static void samsung_timer_resume(void)
-{
-	/* event timer restart */
-	samsung_time_setup(timer_source.event_id, clock_count_per_tick);
-	samsung_time_start(timer_source.event_id, PERIODIC);
-
-	/* source timer restart */
-	samsung_time_setup(timer_source.source_id, TCNT_MAX);
-	samsung_time_start(timer_source.source_id, PERIODIC);
-}
-
-void __init samsung_set_timer_source(enum samsung_timer_mode event,
-				 enum samsung_timer_mode source)
-{
-	s3c_device_timer[event].dev.bus = &platform_bus_type;
-	s3c_device_timer[source].dev.bus = &platform_bus_type;
-
-	timer_source.event_id = event;
-	timer_source.source_id = source;
-}
-
-static struct clock_event_device time_event_device = {
-	.name		= "samsung_event_timer",
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 200,
-	.set_next_event	= samsung_set_next_event,
-	.set_mode	= samsung_set_mode,
-};
-
-static irqreturn_t samsung_clock_event_isr(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction samsung_clock_event_irq = {
-	.name		= "samsung_time_irq",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= samsung_clock_event_isr,
-	.dev_id		= &time_event_device,
-};
-
-static void __init samsung_clockevent_init(void)
-{
-	unsigned long pclk;
-	unsigned long clock_rate;
-	unsigned int irq_number;
-	struct clk *tscaler;
-
-	pclk = clk_get_rate(timerclk);
-
-	tscaler = clk_get_parent(tdiv_event);
-
-	clk_set_rate(tscaler, pclk / TSCALER_DIV);
-	clk_set_rate(tdiv_event, pclk / TDIV);
-	clk_set_parent(tin_event, tdiv_event);
-
-	clock_rate = clk_get_rate(tin_event);
-	clock_count_per_tick = clock_rate / HZ;
-
-	time_event_device.cpumask = cpumask_of(0);
-	clockevents_config_and_register(&time_event_device, clock_rate, 1, -1);
-
-	irq_number = timer_source.event_id + IRQ_TIMER0;
-	setup_irq(irq_number, &samsung_clock_event_irq);
-}
-
-static void __iomem *samsung_timer_reg(void)
-{
-	unsigned long offset = 0;
-
-	switch (timer_source.source_id) {
-	case SAMSUNG_PWM0:
-	case SAMSUNG_PWM1:
-	case SAMSUNG_PWM2:
-	case SAMSUNG_PWM3:
-		offset = (timer_source.source_id * 0x0c) + 0x14;
-		break;
-
-	case SAMSUNG_PWM4:
-		offset = 0x40;
-		break;
-
-	default:
-		printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id);
-		return NULL;
-	}
-
-	return S3C_TIMERREG(offset);
-}
-
-/*
- * Override the global weak sched_clock symbol with this
- * local implementation which uses the clocksource to get some
- * better resolution when scheduling the kernel. We accept that
- * this wraps around for now, since it is just a relative time
- * stamp. (Inspired by U300 implementation.)
- */
-static u32 notrace samsung_read_sched_clock(void)
-{
-	void __iomem *reg = samsung_timer_reg();
-
-	if (!reg)
-		return 0;
-
-	return ~__raw_readl(reg);
-}
-
-static void __init samsung_clocksource_init(void)
-{
-	unsigned long pclk;
-	unsigned long clock_rate;
-
-	pclk = clk_get_rate(timerclk);
-
-	clk_set_rate(tdiv_source, pclk / TDIV);
-	clk_set_parent(tin_source, tdiv_source);
-
-	clock_rate = clk_get_rate(tin_source);
-
-	samsung_time_setup(timer_source.source_id, TCNT_MAX);
-	samsung_time_start(timer_source.source_id, PERIODIC);
-
-	setup_sched_clock(samsung_read_sched_clock, TSIZE, clock_rate);
-
-	if (clocksource_mmio_init(samsung_timer_reg(), "samsung_clocksource_timer",
-			clock_rate, 250, TSIZE, clocksource_mmio_readl_down))
-		panic("samsung_clocksource_timer: can't register clocksource\n");
-}
-
-static void __init samsung_timer_resources(void)
-{
-
-	unsigned long event_id = timer_source.event_id;
-	unsigned long source_id = timer_source.source_id;
-	char devname[15];
-
-	timerclk = clk_get(NULL, "timers");
-	if (IS_ERR(timerclk))
-		panic("failed to get timers clock for timer");
-
-	clk_enable(timerclk);
-
-	sprintf(devname, "s3c24xx-pwm.%lu", event_id);
-	s3c_device_timer[event_id].id = event_id;
-	s3c_device_timer[event_id].dev.init_name = devname;
-
-	tin_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tin");
-	if (IS_ERR(tin_event))
-		panic("failed to get pwm-tin clock for event timer");
-
-	tdiv_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tdiv");
-	if (IS_ERR(tdiv_event))
-		panic("failed to get pwm-tdiv clock for event timer");
-
-	clk_enable(tin_event);
-
-	sprintf(devname, "s3c24xx-pwm.%lu", source_id);
-	s3c_device_timer[source_id].id = source_id;
-	s3c_device_timer[source_id].dev.init_name = devname;
-
-	tin_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tin");
-	if (IS_ERR(tin_source))
-		panic("failed to get pwm-tin clock for source timer");
-
-	tdiv_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tdiv");
-	if (IS_ERR(tdiv_source))
-		panic("failed to get pwm-tdiv clock for source timer");
-
-	clk_enable(tin_source);
-}
-
-void __init samsung_timer_init(void)
-{
-	samsung_timer_resources();
-	samsung_clockevent_init();
-	samsung_clocksource_init();
-}
diff --git a/arch/arm/plat-samsung/setup-mipiphy.c b/arch/arm/plat-samsung/setup-mipiphy.c
deleted file mode 100644
index 66df315..0000000
--- a/arch/arm/plat-samsung/setup-mipiphy.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- *
- * S5P - Helper functions for MIPI-CSIS and MIPI-DSIM D-PHY control
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <mach/regs-clock.h>
-
-static int __s5p_mipi_phy_control(int id, bool on, u32 reset)
-{
-	static DEFINE_SPINLOCK(lock);
-	void __iomem *addr;
-	unsigned long flags;
-	u32 cfg;
-
-	id = max(0, id);
-	if (id > 1)
-		return -EINVAL;
-
-	addr = S5P_MIPI_DPHY_CONTROL(id);
-
-	spin_lock_irqsave(&lock, flags);
-
-	cfg = __raw_readl(addr);
-	cfg = on ? (cfg | reset) : (cfg & ~reset);
-	__raw_writel(cfg, addr);
-
-	if (on) {
-		cfg |= S5P_MIPI_DPHY_ENABLE;
-	} else if (!(cfg & (S5P_MIPI_DPHY_SRESETN |
-			    S5P_MIPI_DPHY_MRESETN) & ~reset)) {
-		cfg &= ~S5P_MIPI_DPHY_ENABLE;
-	}
-
-	__raw_writel(cfg, addr);
-	spin_unlock_irqrestore(&lock, flags);
-
-	return 0;
-}
-
-int s5p_csis_phy_enable(int id, bool on)
-{
-	return __s5p_mipi_phy_control(id, on, S5P_MIPI_DPHY_SRESETN);
-}
-EXPORT_SYMBOL(s5p_csis_phy_enable);
-
-int s5p_dsim_phy_enable(struct platform_device *pdev, bool on)
-{
-	return __s5p_mipi_phy_control(pdev->id, on, S5P_MIPI_DPHY_MRESETN);
-}
-EXPORT_SYMBOL(s5p_dsim_phy_enable);
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 8d10dc8..3e5d311 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -78,6 +78,11 @@
 ENTRY(vfp_support_entry)
 	DBGSTR3	"instr %08x pc %08x state %p", r0, r2, r10
 
+	ldr	r3, [sp, #S_PSR]	@ Neither lazy restore nor FP exceptions
+	and	r3, r3, #MODE_MASK	@ are supported in kernel mode
+	teq	r3, #USR_MODE
+	bne	vfp_kmode_exception	@ Returns through lr
+
 	VFPFMRX	r1, FPEXC		@ Is the VFP enabled?
 	DBGSTR1	"fpexc %08x", r1
 	tst	r1, #FPEXC_EN
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 5dfbb0b..52b8f40 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/uaccess.h>
 #include <linux/user.h>
+#include <linux/export.h>
 
 #include <asm/cp15.h>
 #include <asm/cputype.h>
@@ -648,6 +649,72 @@ static int vfp_hotplug(struct notifier_block *b, unsigned long action,
 	return NOTIFY_OK;
 }
 
+void vfp_kmode_exception(void)
+{
+	/*
+	 * If we reach this point, a floating point exception has been raised
+	 * while running in kernel mode. If the NEON/VFP unit was enabled at the
+	 * time, it means a VFP instruction has been issued that requires
+	 * software assistance to complete, something which is not currently
+	 * supported in kernel mode.
+	 * If the NEON/VFP unit was disabled, and the location pointed to below
+	 * is properly preceded by a call to kernel_neon_begin(), something has
+	 * caused the task to be scheduled out and back in again. In this case,
+	 * rebuilding and running with CONFIG_DEBUG_ATOMIC_SLEEP enabled should
+	 * be helpful in localizing the problem.
+	 */
+	if (fmrx(FPEXC) & FPEXC_EN)
+		pr_crit("BUG: unsupported FP instruction in kernel mode\n");
+	else
+		pr_crit("BUG: FP instruction issued in kernel mode with FP unit disabled\n");
+}
+
+#ifdef CONFIG_KERNEL_MODE_NEON
+
+/*
+ * Kernel-side NEON support functions
+ */
+void kernel_neon_begin(void)
+{
+	struct thread_info *thread = current_thread_info();
+	unsigned int cpu;
+	u32 fpexc;
+
+	/*
+	 * Kernel mode NEON is only allowed outside of interrupt context
+	 * with preemption disabled. This will make sure that the kernel
+	 * mode NEON register contents never need to be preserved.
+	 */
+	BUG_ON(in_interrupt());
+	cpu = get_cpu();
+
+	fpexc = fmrx(FPEXC) | FPEXC_EN;
+	fmxr(FPEXC, fpexc);
+
+	/*
+	 * Save the userland NEON/VFP state. Under UP,
+	 * the owner could be a task other than 'current'
+	 */
+	if (vfp_state_in_hw(cpu, thread))
+		vfp_save_state(&thread->vfpstate, fpexc);
+#ifndef CONFIG_SMP
+	else if (vfp_current_hw_state[cpu] != NULL)
+		vfp_save_state(vfp_current_hw_state[cpu], fpexc);
+#endif
+	vfp_current_hw_state[cpu] = NULL;
+}
+EXPORT_SYMBOL(kernel_neon_begin);
+
+void kernel_neon_end(void)
+{
+	/* Disable the NEON/VFP unit. */
+	fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
+	put_cpu();
+}
+EXPORT_SYMBOL(kernel_neon_end);
+
+#endif /* CONFIG_KERNEL_MODE_NEON */
+
 /*
  * VFP support code initialisation.
  */
@@ -731,4 +798,4 @@ static int __init vfp_init(void)
 	return 0;
 }
 
-late_initcall(vfp_init);
+core_initcall(vfp_init);
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index 8a6295c..83e4f95 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -21,6 +21,8 @@
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
+#include <linux/cpuidle.h>
+#include <linux/cpufreq.h>
 
 #include <linux/mm.h>
 
@@ -267,18 +269,28 @@ static int __init xen_guest_init(void)
 	if (!xen_initial_domain())
 		xenbus_probe(NULL);
 
+	/*
+	 * Making sure board specific code will not set up ops for
+	 * cpu idle and cpu freq.
+	 */
+	disable_cpuidle();
+	disable_cpufreq();
+
 	return 0;
 }
 core_initcall(xen_guest_init);
 
 static int __init xen_pm_init(void)
 {
+	if (!xen_domain())
+		return -ENODEV;
+
 	pm_power_off = xen_power_off;
 	arm_pm_restart = xen_restart;
 
 	return 0;
 }
-subsys_initcall(xen_pm_init);
+late_initcall(xen_pm_init);
 
 static irqreturn_t xen_arm_callback(int irq, void *arg)
 {
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 9737e97..ce6ae94 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -1,6 +1,7 @@
 config ARM64
 	def_bool y
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
+	select ARCH_USE_CMPXCHG_LOCKREF
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
 	select ARCH_WANT_FRAME_POINTERS
@@ -23,7 +24,6 @@ config ARM64
 	select HAVE_DMA_API_DEBUG
 	select HAVE_DMA_ATTRS
 	select HAVE_GENERIC_DMA_COHERENT
-	select HAVE_GENERIC_HARDIRQS
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS
 	select HAVE_MEMBLOCK
 	select HAVE_PERF_EVENTS
@@ -62,10 +62,6 @@ config LOCKDEP_SUPPORT
 config TRACE_IRQFLAGS_SUPPORT
 	def_bool y
 
-config GENERIC_LOCKBREAK
-	def_bool y
-	depends on SMP && PREEMPT
-
 config RWSEM_GENERIC_SPINLOCK
 	def_bool y
 
@@ -96,6 +92,9 @@ config SWIOTLB
 config IOMMU_HELPER
 	def_bool SWIOTLB
 
+config KERNEL_MODE_NEON
+	def_bool y
+
 source "init/Kconfig"
 
 source "kernel/Kconfig.freezer"
@@ -136,6 +135,11 @@ config ARM64_64K_PAGES
 	  look-up. AArch32 emulation is not available when this feature
 	  is enabled.
 
+config CPU_BIG_ENDIAN
+       bool "Build big-endian kernel"
+       help
+         Say Y if you plan on running a kernel in big-endian mode.
+
 config SMP
 	bool "Symmetric Multi-Processing"
 	select USE_GENERIC_SMP_HELPERS
@@ -158,6 +162,13 @@ config NR_CPUS
 	default "8" if ARCH_XGENE
 	default "4"
 
+config HOTPLUG_CPU
+	bool "Support for hot-pluggable CPUs"
+	depends on SMP
+	help
+	  Say Y here to experiment with turning CPUs off and on.  CPUs
+	  can be controlled through /sys/devices/system/cpu.
+
 source kernel/Kconfig.preempt
 
 config HZ
diff --git a/arch/arm64/Kconfig.debug b/arch/arm64/Kconfig.debug
index 1a6bfe9..835c559 100644
--- a/arch/arm64/Kconfig.debug
+++ b/arch/arm64/Kconfig.debug
@@ -6,13 +6,6 @@ config FRAME_POINTER
 	bool
 	default y
 
-config DEBUG_STACK_USAGE
-	bool "Enable stack utilization instrumentation"
-	depends on DEBUG_KERNEL
-	help
-	  Enables the display of the minimum amount of free stack which each
-	  task has ever had available in the sysrq-T output.
-
 config EARLY_PRINTK
 	bool "Early printk support"
 	default y
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index d90cf79..2fceb71 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -20,9 +20,15 @@ LIBGCC 		:= $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
 KBUILD_DEFCONFIG := defconfig
 
 KBUILD_CFLAGS	+= -mgeneral-regs-only
+ifeq ($(CONFIG_CPU_BIG_ENDIAN), y)
+KBUILD_CPPFLAGS	+= -mbig-endian
+AS		+= -EB
+LD		+= -EB
+else
 KBUILD_CPPFLAGS	+= -mlittle-endian
 AS		+= -EL
 LD		+= -EL
+endif
 
 comma = ,
 
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 5b3e832..84139be 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -26,7 +26,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_VEXPRESS=y
 CONFIG_ARCH_XGENE=y
 CONFIG_SMP=y
-CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_PREEMPT=y
 CONFIG_CMDLINE="console=ttyAMA0"
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_COMPAT=y
@@ -42,7 +42,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
-# CONFIG_BLK_DEV is not set
+CONFIG_BLK_DEV=y
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
@@ -72,6 +72,7 @@ CONFIG_LOGO=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_FUSE_FS=y
@@ -90,3 +91,5 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_FTRACE is not set
 CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_BLK=y
diff --git a/arch/arm64/include/asm/arch_timer.h b/arch/arm64/include/asm/arch_timer.h
index 98abd47..c9f1d28 100644
--- a/arch/arm64/include/asm/arch_timer.h
+++ b/arch/arm64/include/asm/arch_timer.h
@@ -26,7 +26,13 @@
 
 #include <clocksource/arm_arch_timer.h>
 
-static inline void arch_timer_reg_write(int access, int reg, u32 val)
+/*
+ * These register accessors are marked inline so the compiler can
+ * nicely work out which register we want, and chuck away the rest of
+ * the code.
+ */
+static __always_inline
+void arch_timer_reg_write_cp15(int access, enum arch_timer_reg reg, u32 val)
 {
 	if (access == ARCH_TIMER_PHYS_ACCESS) {
 		switch (reg) {
@@ -36,8 +42,6 @@ static inline void arch_timer_reg_write(int access, int reg, u32 val)
 		case ARCH_TIMER_REG_TVAL:
 			asm volatile("msr cntp_tval_el0, %0" : : "r" (val));
 			break;
-		default:
-			BUILD_BUG();
 		}
 	} else if (access == ARCH_TIMER_VIRT_ACCESS) {
 		switch (reg) {
@@ -47,17 +51,14 @@ static inline void arch_timer_reg_write(int access, int reg, u32 val)
 		case ARCH_TIMER_REG_TVAL:
 			asm volatile("msr cntv_tval_el0, %0" : : "r" (val));
 			break;
-		default:
-			BUILD_BUG();
 		}
-	} else {
-		BUILD_BUG();
 	}
 
 	isb();
 }
 
-static inline u32 arch_timer_reg_read(int access, int reg)
+static __always_inline
+u32 arch_timer_reg_read_cp15(int access, enum arch_timer_reg reg)
 {
 	u32 val;
 
@@ -69,8 +70,6 @@ static inline u32 arch_timer_reg_read(int access, int reg)
 		case ARCH_TIMER_REG_TVAL:
 			asm volatile("mrs %0, cntp_tval_el0" : "=r" (val));
 			break;
-		default:
-			BUILD_BUG();
 		}
 	} else if (access == ARCH_TIMER_VIRT_ACCESS) {
 		switch (reg) {
@@ -80,11 +79,7 @@ static inline u32 arch_timer_reg_read(int access, int reg)
 		case ARCH_TIMER_REG_TVAL:
 			asm volatile("mrs %0, cntv_tval_el0" : "=r" (val));
 			break;
-		default:
-			BUILD_BUG();
 		}
-	} else {
-		BUILD_BUG();
 	}
 
 	return val;
diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h
index 5aceb83..fd3e392 100644
--- a/arch/arm64/include/asm/assembler.h
+++ b/arch/arm64/include/asm/assembler.h
@@ -115,3 +115,34 @@ lr	.req	x30		// link register
 	.align	7
 	b	\label
 	.endm
+
+/*
+ * Select code when configured for BE.
+ */
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define CPU_BE(code...) code
+#else
+#define CPU_BE(code...)
+#endif
+
+/*
+ * Select code when configured for LE.
+ */
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define CPU_LE(code...)
+#else
+#define CPU_LE(code...) code
+#endif
+
+/*
+ * Define a macro that constructs a 64-bit value by concatenating two
+ * 32-bit registers. Note that on big endian systems the order of the
+ * registers is swapped.
+ */
+#ifndef CONFIG_CPU_BIG_ENDIAN
+	.macro	regs_to_64, rd, lbits, hbits
+#else
+	.macro	regs_to_64, rd, hbits, lbits
+#endif
+	orr	\rd, \lbits, \hbits, lsl #32
+	.endm
diff --git a/arch/arm64/include/asm/cmpxchg.h b/arch/arm64/include/asm/cmpxchg.h
index 8a8ce0e..3914c0d 100644
--- a/arch/arm64/include/asm/cmpxchg.h
+++ b/arch/arm64/include/asm/cmpxchg.h
@@ -173,4 +173,6 @@ static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old,
 #define cmpxchg64(ptr,o,n)		cmpxchg((ptr),(o),(n))
 #define cmpxchg64_local(ptr,o,n)	cmpxchg_local((ptr),(o),(n))
 
+#define cmpxchg64_relaxed(ptr,o,n)	cmpxchg_local((ptr),(o),(n))
+
 #endif	/* __ASM_CMPXCHG_H */
diff --git a/arch/arm64/include/asm/compat.h b/arch/arm64/include/asm/compat.h
index 899af80..fda2704 100644
--- a/arch/arm64/include/asm/compat.h
+++ b/arch/arm64/include/asm/compat.h
@@ -26,7 +26,11 @@
 #include <linux/ptrace.h>
 
 #define COMPAT_USER_HZ		100
+#ifdef __AARCH64EB__
+#define COMPAT_UTS_MACHINE	"armv8b\0\0"
+#else
 #define COMPAT_UTS_MACHINE	"armv8l\0\0"
+#endif
 
 typedef u32		compat_size_t;
 typedef s32		compat_ssize_t;
@@ -73,13 +77,23 @@ struct compat_timeval {
 };
 
 struct compat_stat {
+#ifdef __AARCH64EB__
+	short		st_dev;
+	short		__pad1;
+#else
 	compat_dev_t	st_dev;
+#endif
 	compat_ino_t	st_ino;
 	compat_mode_t	st_mode;
 	compat_ushort_t	st_nlink;
 	__compat_uid16_t	st_uid;
 	__compat_gid16_t	st_gid;
+#ifdef __AARCH64EB__
+	short		st_rdev;
+	short		__pad2;
+#else
 	compat_dev_t	st_rdev;
+#endif
 	compat_off_t	st_size;
 	compat_off_t	st_blksize;
 	compat_off_t	st_blocks;
diff --git a/arch/arm64/include/asm/cpu_ops.h b/arch/arm64/include/asm/cpu_ops.h
new file mode 100644
index 0000000..c4cdb5e
--- /dev/null
+++ b/arch/arm64/include/asm/cpu_ops.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2013 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_CPU_OPS_H
+#define __ASM_CPU_OPS_H
+
+#include <linux/init.h>
+#include <linux/threads.h>
+
+struct device_node;
+
+/**
+ * struct cpu_operations - Callback operations for hotplugging CPUs.
+ *
+ * @name:	Name of the property as appears in a devicetree cpu node's
+ *		enable-method property.
+ * @cpu_init:	Reads any data necessary for a specific enable-method from the
+ *		devicetree, for a given cpu node and proposed logical id.
+ * @cpu_prepare: Early one-time preparation step for a cpu. If there is a
+ *		mechanism for doing so, tests whether it is possible to boot
+ *		the given CPU.
+ * @cpu_boot:	Boots a cpu into the kernel.
+ * @cpu_postboot: Optionally, perform any post-boot cleanup or necesary
+ *		synchronisation. Called from the cpu being booted.
+ * @cpu_disable: Prepares a cpu to die. May fail for some mechanism-specific
+ * 		reason, which will cause the hot unplug to be aborted. Called
+ * 		from the cpu to be killed.
+ * @cpu_die:	Makes a cpu leave the kernel. Must not fail. Called from the
+ *		cpu being killed.
+ */
+struct cpu_operations {
+	const char	*name;
+	int		(*cpu_init)(struct device_node *, unsigned int);
+	int		(*cpu_prepare)(unsigned int);
+	int		(*cpu_boot)(unsigned int);
+	void		(*cpu_postboot)(void);
+#ifdef CONFIG_HOTPLUG_CPU
+	int		(*cpu_disable)(unsigned int cpu);
+	void		(*cpu_die)(unsigned int cpu);
+#endif
+};
+
+extern const struct cpu_operations *cpu_ops[NR_CPUS];
+extern int __init cpu_read_ops(struct device_node *dn, int cpu);
+extern void __init cpu_read_bootcpu_ops(void);
+
+#endif /* ifndef __ASM_CPU_OPS_H */
diff --git a/arch/arm64/include/asm/elf.h b/arch/arm64/include/asm/elf.h
index fe32c0e..01d3aab 100644
--- a/arch/arm64/include/asm/elf.h
+++ b/arch/arm64/include/asm/elf.h
@@ -33,8 +33,6 @@ typedef unsigned long elf_greg_t;
 typedef elf_greg_t elf_gregset_t[ELF_NGREG];
 typedef struct user_fpsimd_state elf_fpregset_t;
 
-#define EM_AARCH64		183
-
 /*
  * AArch64 static relocation types.
  */
@@ -92,11 +90,24 @@ typedef struct user_fpsimd_state elf_fpregset_t;
  * These are used to set parameters in the core dumps.
  */
 #define ELF_CLASS	ELFCLASS64
+#ifdef __AARCH64EB__
+#define ELF_DATA	ELFDATA2MSB
+#else
 #define ELF_DATA	ELFDATA2LSB
+#endif
 #define ELF_ARCH	EM_AARCH64
 
+/*
+ * This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization.  This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+ */
 #define ELF_PLATFORM_SIZE	16
+#ifdef __AARCH64EB__
+#define ELF_PLATFORM		("aarch64_be")
+#else
 #define ELF_PLATFORM		("aarch64")
+#endif
 
 /*
  * This is used to ensure we don't load something for the wrong architecture.
@@ -151,8 +162,12 @@ extern unsigned long arch_randomize_brk(struct mm_struct *mm);
 #define arch_randomize_brk arch_randomize_brk
 
 #ifdef CONFIG_COMPAT
-#define EM_ARM				40
+
+#ifdef __AARCH64EB__
+#define COMPAT_ELF_PLATFORM		("v8b")
+#else
 #define COMPAT_ELF_PLATFORM		("v8l")
+#endif
 
 #define COMPAT_ELF_ET_DYN_BASE		(randomize_et_dyn(2 * TASK_SIZE_32 / 3))
 
diff --git a/arch/arm64/include/asm/hwcap.h b/arch/arm64/include/asm/hwcap.h
index 6d4482f..e2950b0 100644
--- a/arch/arm64/include/asm/hwcap.h
+++ b/arch/arm64/include/asm/hwcap.h
@@ -43,6 +43,6 @@
 				 COMPAT_HWCAP_VFPv3|COMPAT_HWCAP_VFPv4|\
 				 COMPAT_HWCAP_NEON|COMPAT_HWCAP_IDIV)
 
-extern unsigned int elf_hwcap;
+extern unsigned long elf_hwcap;
 #endif
 #endif
diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h
index 1d12f89..b56e5b5 100644
--- a/arch/arm64/include/asm/io.h
+++ b/arch/arm64/include/asm/io.h
@@ -224,6 +224,7 @@ extern void __memset_io(volatile void __iomem *, int, size_t);
  */
 extern void __iomem *__ioremap(phys_addr_t phys_addr, size_t size, pgprot_t prot);
 extern void __iounmap(volatile void __iomem *addr);
+extern void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size);
 
 #define PROT_DEFAULT		(PTE_TYPE_PAGE | PTE_AF | PTE_DIRTY)
 #define PROT_DEVICE_nGnRE	(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_DEVICE_nGnRE))
@@ -233,7 +234,6 @@ extern void __iounmap(volatile void __iomem *addr);
 #define ioremap(addr, size)		__ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
 #define ioremap_nocache(addr, size)	__ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
 #define ioremap_wc(addr, size)		__ioremap((addr), (size), __pgprot(PROT_NORMAL_NC))
-#define ioremap_cached(addr, size)	__ioremap((addr), (size), __pgprot(PROT_NORMAL))
 #define iounmap				__iounmap
 
 #define PROT_SECT_DEFAULT	(PMD_TYPE_SECT | PMD_SECT_AF)
diff --git a/arch/arm64/include/asm/irq.h b/arch/arm64/include/asm/irq.h
index 0332fc0..e1f7ecd 100644
--- a/arch/arm64/include/asm/irq.h
+++ b/arch/arm64/include/asm/irq.h
@@ -4,6 +4,7 @@
 #include <asm-generic/irq.h>
 
 extern void (*handle_arch_irq)(struct pt_regs *);
+extern void migrate_irqs(void);
 extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
 
 #endif
diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h
index 20925bc..3776217 100644
--- a/arch/arm64/include/asm/memory.h
+++ b/arch/arm64/include/asm/memory.h
@@ -33,18 +33,23 @@
 #define UL(x) _AC(x, UL)
 
 /*
- * PAGE_OFFSET - the virtual address of the start of the kernel image.
+ * PAGE_OFFSET - the virtual address of the start of the kernel image (top
+ *		 (VA_BITS - 1))
  * VA_BITS - the maximum number of bits for virtual addresses.
  * TASK_SIZE - the maximum size of a user space task.
  * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area.
  * The module space lives between the addresses given by TASK_SIZE
  * and PAGE_OFFSET - it must be within 128MB of the kernel text.
  */
-#define PAGE_OFFSET		UL(0xffffffc000000000)
+#ifdef CONFIG_ARM64_64K_PAGES
+#define VA_BITS			(42)
+#else
+#define VA_BITS			(39)
+#endif
+#define PAGE_OFFSET		(UL(0xffffffffffffffff) << (VA_BITS - 1))
 #define MODULES_END		(PAGE_OFFSET)
 #define MODULES_VADDR		(MODULES_END - SZ_64M)
 #define EARLYCON_IOBASE		(MODULES_VADDR - SZ_4M)
-#define VA_BITS			(39)
 #define TASK_SIZE_64		(UL(1) << VA_BITS)
 
 #ifdef CONFIG_COMPAT
diff --git a/arch/arm/lib/io-shark.c b/arch/arm64/include/asm/neon.h
index 8242539..b0cc58a9 100644
--- a/arch/arm/lib/io-shark.c
+++ b/arch/arm64/include/asm/neon.h
@@ -1,13 +1,14 @@
 /*
- *  linux/arch/arm/lib/io-shark.c
+ * linux/arch/arm64/include/asm/neon.h
  *
- *  by Alexander Schulz
- *
- * derived from:
- * linux/arch/arm/lib/io-ebsa.S
- * Copyright (C) 1995, 1996 Russell King
+ * Copyright (C) 2013 Linaro Ltd <ard.biesheuvel@linaro.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+
+#define cpu_has_neon()		(1)
+
+void kernel_neon_begin(void);
+void kernel_neon_end(void);
diff --git a/arch/arm64/include/asm/pgtable-2level-hwdef.h b/arch/arm64/include/asm/pgtable-2level-hwdef.h
index 0a8ed3f..2593b49 100644
--- a/arch/arm64/include/asm/pgtable-2level-hwdef.h
+++ b/arch/arm64/include/asm/pgtable-2level-hwdef.h
@@ -21,10 +21,10 @@
  * 8192 entries of 8 bytes each, occupying a 64KB page. Levels 0 and 1 are not
  * used. The 2nd level table (PGD for Linux) can cover a range of 4TB, each
  * entry representing 512MB. The user and kernel address spaces are limited to
- * 512GB and therefore we only use 1024 entries in the PGD.
+ * 4TB in the 64KB page configuration.
  */
 #define PTRS_PER_PTE		8192
-#define PTRS_PER_PGD		1024
+#define PTRS_PER_PGD		8192
 
 /*
  * PGDIR_SHIFT determines the size a top-level page table entry can map.
diff --git a/arch/arm64/include/asm/pgtable-2level-types.h b/arch/arm64/include/asm/pgtable-2level-types.h
index 3c3ca7d..5f101e6 100644
--- a/arch/arm64/include/asm/pgtable-2level-types.h
+++ b/arch/arm64/include/asm/pgtable-2level-types.h
@@ -16,6 +16,8 @@
 #ifndef __ASM_PGTABLE_2LEVEL_TYPES_H
 #define __ASM_PGTABLE_2LEVEL_TYPES_H
 
+#include <asm/types.h>
+
 typedef u64 pteval_t;
 typedef u64 pgdval_t;
 typedef pgdval_t pmdval_t;
diff --git a/arch/arm64/include/asm/pgtable-3level-types.h b/arch/arm64/include/asm/pgtable-3level-types.h
index 4489615..4e94424 100644
--- a/arch/arm64/include/asm/pgtable-3level-types.h
+++ b/arch/arm64/include/asm/pgtable-3level-types.h
@@ -16,6 +16,8 @@
 #ifndef __ASM_PGTABLE_3LEVEL_TYPES_H
 #define __ASM_PGTABLE_3LEVEL_TYPES_H
 
+#include <asm/types.h>
+
 typedef u64 pteval_t;
 typedef u64 pmdval_t;
 typedef u64 pgdval_t;
diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h
index e182a35..d57e668 100644
--- a/arch/arm64/include/asm/pgtable-hwdef.h
+++ b/arch/arm64/include/asm/pgtable-hwdef.h
@@ -122,5 +122,6 @@
 #define TCR_TG1_64K		(UL(1) << 30)
 #define TCR_IPS_40BIT		(UL(2) << 32)
 #define TCR_ASID16		(UL(1) << 36)
+#define TCR_TBI0		(UL(1) << 37)
 
 #endif
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index f0bebc5..17bd3af 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -33,7 +33,7 @@
 /*
  * VMALLOC and SPARSEMEM_VMEMMAP ranges.
  */
-#define VMALLOC_START		UL(0xffffff8000000000)
+#define VMALLOC_START		(UL(0xffffffffffffffff) << VA_BITS)
 #define VMALLOC_END		(PAGE_OFFSET - UL(0x400000000) - SZ_64K)
 
 #define vmemmap			((struct page *)(VMALLOC_END + SZ_64K))
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index ab239b2..45b20cd 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -107,6 +107,11 @@ static inline void compat_start_thread(struct pt_regs *regs, unsigned long pc,
 	regs->pstate = COMPAT_PSR_MODE_USR;
 	if (pc & 1)
 		regs->pstate |= COMPAT_PSR_T_BIT;
+
+#ifdef __AARCH64EB__
+	regs->pstate |= COMPAT_PSR_E_BIT;
+#endif
+
 	regs->compat_sp = sp;
 }
 #endif
diff --git a/arch/arm64/include/asm/psci.h b/arch/arm64/include/asm/psci.h
index 0604237..e5312ea 100644
--- a/arch/arm64/include/asm/psci.h
+++ b/arch/arm64/include/asm/psci.h
@@ -14,25 +14,6 @@
 #ifndef __ASM_PSCI_H
 #define __ASM_PSCI_H
 
-#define PSCI_POWER_STATE_TYPE_STANDBY		0
-#define PSCI_POWER_STATE_TYPE_POWER_DOWN	1
-
-struct psci_power_state {
-	u16	id;
-	u8	type;
-	u8	affinity_level;
-};
-
-struct psci_operations {
-	int (*cpu_suspend)(struct psci_power_state state,
-			   unsigned long entry_point);
-	int (*cpu_off)(struct psci_power_state state);
-	int (*cpu_on)(unsigned long cpuid, unsigned long entry_point);
-	int (*migrate)(unsigned long cpuid);
-};
-
-extern struct psci_operations psci_ops;
-
 int psci_init(void);
 
 #endif /* __ASM_PSCI_H */
diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h
index 0dacbbf..0e7fa49 100644
--- a/arch/arm64/include/asm/ptrace.h
+++ b/arch/arm64/include/asm/ptrace.h
@@ -42,6 +42,7 @@
 #define COMPAT_PSR_MODE_UND	0x0000001b
 #define COMPAT_PSR_MODE_SYS	0x0000001f
 #define COMPAT_PSR_T_BIT	0x00000020
+#define COMPAT_PSR_E_BIT	0x00000200
 #define COMPAT_PSR_F_BIT	0x00000040
 #define COMPAT_PSR_I_BIT	0x00000080
 #define COMPAT_PSR_A_BIT	0x00000100
diff --git a/arch/arm64/include/asm/smp.h b/arch/arm64/include/asm/smp.h
index 4b8023c..a498f2c 100644
--- a/arch/arm64/include/asm/smp.h
+++ b/arch/arm64/include/asm/smp.h
@@ -60,21 +60,14 @@ struct secondary_data {
 	void *stack;
 };
 extern struct secondary_data secondary_data;
-extern void secondary_holding_pen(void);
-extern volatile unsigned long secondary_holding_pen_release;
+extern void secondary_entry(void);
 
 extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
 
-struct device_node;
+extern int __cpu_disable(void);
 
-struct smp_enable_ops {
-	const char	*name;
-	int		(*init_cpu)(struct device_node *, int);
-	int		(*prepare_cpu)(int);
-};
-
-extern const struct smp_enable_ops smp_spin_table_ops;
-extern const struct smp_enable_ops smp_psci_ops;
+extern void __cpu_die(unsigned int cpu);
+extern void cpu_die(void);
 
 #endif /* ifndef __ASM_SMP_H */
diff --git a/arch/arm64/include/asm/spinlock.h b/arch/arm64/include/asm/spinlock.h
index 0defa07..3d5cf06 100644
--- a/arch/arm64/include/asm/spinlock.h
+++ b/arch/arm64/include/asm/spinlock.h
@@ -22,17 +22,10 @@
 /*
  * Spinlock implementation.
  *
- * The old value is read exclusively and the new one, if unlocked, is written
- * exclusively. In case of failure, the loop is restarted.
- *
  * The memory barriers are implicit with the load-acquire and store-release
  * instructions.
- *
- * Unlocked value: 0
- * Locked value: 1
  */
 
-#define arch_spin_is_locked(x)		((x)->lock != 0)
 #define arch_spin_unlock_wait(lock) \
 	do { while (arch_spin_is_locked(lock)) cpu_relax(); } while (0)
 
@@ -41,32 +34,51 @@
 static inline void arch_spin_lock(arch_spinlock_t *lock)
 {
 	unsigned int tmp;
+	arch_spinlock_t lockval, newval;
 
 	asm volatile(
-	"	sevl\n"
-	"1:	wfe\n"
-	"2:	ldaxr	%w0, %1\n"
-	"	cbnz	%w0, 1b\n"
-	"	stxr	%w0, %w2, %1\n"
-	"	cbnz	%w0, 2b\n"
-	: "=&r" (tmp), "+Q" (lock->lock)
-	: "r" (1)
-	: "cc", "memory");
+	/* Atomically increment the next ticket. */
+"	prfm	pstl1strm, %3\n"
+"1:	ldaxr	%w0, %3\n"
+"	add	%w1, %w0, %w5\n"
+"	stxr	%w2, %w1, %3\n"
+"	cbnz	%w2, 1b\n"
+	/* Did we get the lock? */
+"	eor	%w1, %w0, %w0, ror #16\n"
+"	cbz	%w1, 3f\n"
+	/*
+	 * No: spin on the owner. Send a local event to avoid missing an
+	 * unlock before the exclusive load.
+	 */
+"	sevl\n"
+"2:	wfe\n"
+"	ldaxrh	%w2, %4\n"
+"	eor	%w1, %w2, %w0, lsr #16\n"
+"	cbnz	%w1, 2b\n"
+	/* We got the lock. Critical section starts here. */
+"3:"
+	: "=&r" (lockval), "=&r" (newval), "=&r" (tmp), "+Q" (*lock)
+	: "Q" (lock->owner), "I" (1 << TICKET_SHIFT)
+	: "memory");
 }
 
 static inline int arch_spin_trylock(arch_spinlock_t *lock)
 {
 	unsigned int tmp;
+	arch_spinlock_t lockval;
 
 	asm volatile(
-	"2:	ldaxr	%w0, %1\n"
-	"	cbnz	%w0, 1f\n"
-	"	stxr	%w0, %w2, %1\n"
-	"	cbnz	%w0, 2b\n"
-	"1:\n"
-	: "=&r" (tmp), "+Q" (lock->lock)
-	: "r" (1)
-	: "cc", "memory");
+"	prfm	pstl1strm, %2\n"
+"1:	ldaxr	%w0, %2\n"
+"	eor	%w1, %w0, %w0, ror #16\n"
+"	cbnz	%w1, 2f\n"
+"	add	%w0, %w0, %3\n"
+"	stxr	%w1, %w0, %2\n"
+"	cbnz	%w1, 1b\n"
+"2:"
+	: "=&r" (lockval), "=&r" (tmp), "+Q" (*lock)
+	: "I" (1 << TICKET_SHIFT)
+	: "memory");
 
 	return !tmp;
 }
@@ -74,9 +86,28 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock)
 static inline void arch_spin_unlock(arch_spinlock_t *lock)
 {
 	asm volatile(
-	"	stlr	%w1, %0\n"
-	: "=Q" (lock->lock) : "r" (0) : "memory");
+"	stlrh	%w1, %0\n"
+	: "=Q" (lock->owner)
+	: "r" (lock->owner + 1)
+	: "memory");
+}
+
+static inline int arch_spin_value_unlocked(arch_spinlock_t lock)
+{
+	return lock.owner == lock.next;
+}
+
+static inline int arch_spin_is_locked(arch_spinlock_t *lock)
+{
+	return !arch_spin_value_unlocked(ACCESS_ONCE(*lock));
+}
+
+static inline int arch_spin_is_contended(arch_spinlock_t *lock)
+{
+	arch_spinlock_t lockval = ACCESS_ONCE(*lock);
+	return (lockval.next - lockval.owner) > 1;
 }
+#define arch_spin_is_contended	arch_spin_is_contended
 
 /*
  * Write lock implementation.
diff --git a/arch/arm64/include/asm/spinlock_types.h b/arch/arm64/include/asm/spinlock_types.h
index 9a49434..b8d3836 100644
--- a/arch/arm64/include/asm/spinlock_types.h
+++ b/arch/arm64/include/asm/spinlock_types.h
@@ -20,14 +20,19 @@
 # error "please don't include this file directly"
 #endif
 
-/* We only require natural alignment for exclusive accesses. */
-#define __lock_aligned
+#define TICKET_SHIFT	16
 
 typedef struct {
-	volatile unsigned int lock;
-} arch_spinlock_t;
+#ifdef __AARCH64EB__
+	u16 next;
+	u16 owner;
+#else
+	u16 owner;
+	u16 next;
+#endif
+} __aligned(4) arch_spinlock_t;
 
-#define __ARCH_SPIN_LOCK_UNLOCKED	{ 0 }
+#define __ARCH_SPIN_LOCK_UNLOCKED	{ 0 , 0 }
 
 typedef struct {
 	volatile unsigned int lock;
diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h
index 89c047f..70ba9d4 100644
--- a/arch/arm64/include/asm/syscall.h
+++ b/arch/arm64/include/asm/syscall.h
@@ -59,6 +59,9 @@ static inline void syscall_get_arguments(struct task_struct *task,
 					 unsigned int i, unsigned int n,
 					 unsigned long *args)
 {
+	if (n == 0)
+		return;
+
 	if (i + n > SYSCALL_MAX_ARGS) {
 		unsigned long *args_bad = args + SYSCALL_MAX_ARGS - i;
 		unsigned int n_bad = n + i - SYSCALL_MAX_ARGS;
@@ -82,6 +85,9 @@ static inline void syscall_set_arguments(struct task_struct *task,
 					 unsigned int i, unsigned int n,
 					 const unsigned long *args)
 {
+	if (n == 0)
+		return;
+
 	if (i + n > SYSCALL_MAX_ARGS) {
 		pr_warning("%s called with max args %d, handling only %d\n",
 			   __func__, i + n, SYSCALL_MAX_ARGS);
diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h
index edb3d5c..7ecc2b2 100644
--- a/arch/arm64/include/asm/uaccess.h
+++ b/arch/arm64/include/asm/uaccess.h
@@ -166,9 +166,10 @@ do {									\
 
 #define get_user(x, ptr)						\
 ({									\
+	__typeof__(*(ptr)) __user *__p = (ptr);				\
 	might_fault();							\
-	access_ok(VERIFY_READ, (ptr), sizeof(*(ptr))) ?			\
-		__get_user((x), (ptr)) :				\
+	access_ok(VERIFY_READ, __p, sizeof(*__p)) ?			\
+		__get_user((x), __p) :					\
 		((x) = 0, -EFAULT);					\
 })
 
@@ -227,9 +228,10 @@ do {									\
 
 #define put_user(x, ptr)						\
 ({									\
+	__typeof__(*(ptr)) __user *__p = (ptr);				\
 	might_fault();							\
-	access_ok(VERIFY_WRITE, (ptr), sizeof(*(ptr))) ?		\
-		__put_user((x), (ptr)) :				\
+	access_ok(VERIFY_WRITE, __p, sizeof(*__p)) ?			\
+		__put_user((x), __p) :					\
 		-EFAULT;						\
 })
 
diff --git a/arch/arm64/include/asm/virt.h b/arch/arm64/include/asm/virt.h
index 26e310c..130e2be 100644
--- a/arch/arm64/include/asm/virt.h
+++ b/arch/arm64/include/asm/virt.h
@@ -18,7 +18,8 @@
 #ifndef __ASM__VIRT_H
 #define __ASM__VIRT_H
 
-#define BOOT_CPU_MODE_EL2	(0x0e12b007)
+#define BOOT_CPU_MODE_EL1	(0xe11)
+#define BOOT_CPU_MODE_EL2	(0xe12)
 
 #ifndef __ASSEMBLY__
 #include <asm/cacheflush.h>
diff --git a/arch/arm64/include/uapi/asm/byteorder.h b/arch/arm64/include/uapi/asm/byteorder.h
index 2b92046..dc19e95 100644
--- a/arch/arm64/include/uapi/asm/byteorder.h
+++ b/arch/arm64/include/uapi/asm/byteorder.h
@@ -16,6 +16,10 @@
 #ifndef __ASM_BYTEORDER_H
 #define __ASM_BYTEORDER_H
 
+#ifdef __AARCH64EB__
+#include <linux/byteorder/big_endian.h>
+#else
 #include <linux/byteorder/little_endian.h>
+#endif
 
 #endif	/* __ASM_BYTEORDER_H */
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index 7b4b564..5ba2fd4 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -9,12 +9,12 @@ AFLAGS_head.o		:= -DTEXT_OFFSET=$(TEXT_OFFSET)
 arm64-obj-y		:= cputable.o debug-monitors.o entry.o irq.o fpsimd.o	\
 			   entry-fpsimd.o process.o ptrace.o setup.o signal.o	\
 			   sys.o stacktrace.o time.o traps.o io.o vdso.o	\
-			   hyp-stub.o psci.o
+			   hyp-stub.o psci.o cpu_ops.o
 
 arm64-obj-$(CONFIG_COMPAT)		+= sys32.o kuser32.o signal32.o 	\
 					   sys_compat.o
 arm64-obj-$(CONFIG_MODULES)		+= arm64ksyms.o module.o
-arm64-obj-$(CONFIG_SMP)			+= smp.o smp_spin_table.o smp_psci.o
+arm64-obj-$(CONFIG_SMP)			+= smp.o smp_spin_table.o
 arm64-obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event.o
 arm64-obj-$(CONFIG_HAVE_HW_BREAKPOINT)+= hw_breakpoint.o
 arm64-obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
diff --git a/arch/arm64/kernel/arm64ksyms.c b/arch/arm64/kernel/arm64ksyms.c
index 41b4f62..e7ee770 100644
--- a/arch/arm64/kernel/arm64ksyms.c
+++ b/arch/arm64/kernel/arm64ksyms.c
@@ -39,6 +39,7 @@ EXPORT_SYMBOL(clear_page);
 EXPORT_SYMBOL(__copy_from_user);
 EXPORT_SYMBOL(__copy_to_user);
 EXPORT_SYMBOL(__clear_user);
+EXPORT_SYMBOL(__copy_in_user);
 
 	/* physical memory */
 EXPORT_SYMBOL(memstart_addr);
diff --git a/arch/arm64/kernel/cpu_ops.c b/arch/arm64/kernel/cpu_ops.c
new file mode 100644
index 0000000..d62d12f
--- /dev/null
+++ b/arch/arm64/kernel/cpu_ops.c
@@ -0,0 +1,87 @@
+/*
+ * CPU kernel entry/exit control
+ *
+ * Copyright (C) 2013 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <asm/cpu_ops.h>
+#include <asm/smp_plat.h>
+#include <linux/errno.h>
+#include <linux/of.h>
+#include <linux/string.h>
+
+extern const struct cpu_operations smp_spin_table_ops;
+extern const struct cpu_operations cpu_psci_ops;
+
+const struct cpu_operations *cpu_ops[NR_CPUS];
+
+static const struct cpu_operations *supported_cpu_ops[] __initconst = {
+#ifdef CONFIG_SMP
+	&smp_spin_table_ops,
+	&cpu_psci_ops,
+#endif
+	NULL,
+};
+
+static const struct cpu_operations * __init cpu_get_ops(const char *name)
+{
+	const struct cpu_operations **ops = supported_cpu_ops;
+
+	while (*ops) {
+		if (!strcmp(name, (*ops)->name))
+			return *ops;
+
+		ops++;
+	}
+
+	return NULL;
+}
+
+/*
+ * Read a cpu's enable method from the device tree and record it in cpu_ops.
+ */
+int __init cpu_read_ops(struct device_node *dn, int cpu)
+{
+	const char *enable_method = of_get_property(dn, "enable-method", NULL);
+	if (!enable_method) {
+		/*
+		 * The boot CPU may not have an enable method (e.g. when
+		 * spin-table is used for secondaries). Don't warn spuriously.
+		 */
+		if (cpu != 0)
+			pr_err("%s: missing enable-method property\n",
+				dn->full_name);
+		return -ENOENT;
+	}
+
+	cpu_ops[cpu] = cpu_get_ops(enable_method);
+	if (!cpu_ops[cpu]) {
+		pr_warn("%s: unsupported enable-method property: %s\n",
+			dn->full_name, enable_method);
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+void __init cpu_read_bootcpu_ops(void)
+{
+	struct device_node *dn = of_get_cpu_node(0, NULL);
+	if (!dn) {
+		pr_err("Failed to find device node for boot cpu\n");
+		return;
+	}
+	cpu_read_ops(dn, 0);
+}
diff --git a/arch/arm64/kernel/cputable.c b/arch/arm64/kernel/cputable.c
index 63cfc4a..fd3993c 100644
--- a/arch/arm64/kernel/cputable.c
+++ b/arch/arm64/kernel/cputable.c
@@ -22,7 +22,7 @@
 
 extern unsigned long __cpu_setup(void);
 
-struct cpu_info __initdata cpu_table[] = {
+struct cpu_info cpu_table[] = {
 	{
 		.cpu_id_val	= 0x000f0000,
 		.cpu_id_mask	= 0x000f0000,
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 6ad781b..e116614 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -311,14 +311,14 @@ el1_irq:
 #endif
 #ifdef CONFIG_PREEMPT
 	get_thread_info tsk
-	ldr	x24, [tsk, #TI_PREEMPT]		// get preempt count
-	add	x0, x24, #1			// increment it
-	str	x0, [tsk, #TI_PREEMPT]
+	ldr	w24, [tsk, #TI_PREEMPT]		// get preempt count
+	add	w0, w24, #1			// increment it
+	str	w0, [tsk, #TI_PREEMPT]
 #endif
 	irq_handler
 #ifdef CONFIG_PREEMPT
-	str	x24, [tsk, #TI_PREEMPT]		// restore preempt count
-	cbnz	x24, 1f				// preempt count != 0
+	str	w24, [tsk, #TI_PREEMPT]		// restore preempt count
+	cbnz	w24, 1f				// preempt count != 0
 	ldr	x0, [tsk, #TI_FLAGS]		// get flags
 	tbz	x0, #TIF_NEED_RESCHED, 1f	// needs rescheduling?
 	bl	el1_preempt
@@ -423,6 +423,7 @@ el0_da:
 	 * Data abort handling
 	 */
 	mrs	x0, far_el1
+	bic	x0, x0, #(0xff << 56)
 	disable_step x1
 	isb
 	enable_dbg
@@ -476,6 +477,8 @@ el0_undef:
 	 * Undefined instruction
 	 */
 	mov	x0, sp
+	// enable interrupts before calling the main handler
+	enable_irq
 	b	do_undefinstr
 el0_dbg:
 	/*
@@ -506,15 +509,15 @@ el0_irq_naked:
 #endif
 	get_thread_info tsk
 #ifdef CONFIG_PREEMPT
-	ldr	x24, [tsk, #TI_PREEMPT]		// get preempt count
-	add	x23, x24, #1			// increment it
-	str	x23, [tsk, #TI_PREEMPT]
+	ldr	w24, [tsk, #TI_PREEMPT]		// get preempt count
+	add	w23, w24, #1			// increment it
+	str	w23, [tsk, #TI_PREEMPT]
 #endif
 	irq_handler
 #ifdef CONFIG_PREEMPT
-	ldr	x0, [tsk, #TI_PREEMPT]
-	str	x24, [tsk, #TI_PREEMPT]
-	cmp	x0, x23
+	ldr	w0, [tsk, #TI_PREEMPT]
+	str	w24, [tsk, #TI_PREEMPT]
+	cmp	w0, w23
 	b.eq	1f
 	mov	x1, #0
 	str	x1, [x1]			// BUG
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index e8b8357..bb785d2 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -21,6 +21,7 @@
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/signal.h>
+#include <linux/hardirq.h>
 
 #include <asm/fpsimd.h>
 #include <asm/cputype.h>
@@ -79,10 +80,39 @@ void fpsimd_thread_switch(struct task_struct *next)
 
 void fpsimd_flush_thread(void)
 {
+	preempt_disable();
 	memset(&current->thread.fpsimd_state, 0, sizeof(struct fpsimd_state));
 	fpsimd_load_state(&current->thread.fpsimd_state);
+	preempt_enable();
 }
 
+#ifdef CONFIG_KERNEL_MODE_NEON
+
+/*
+ * Kernel-side NEON support functions
+ */
+void kernel_neon_begin(void)
+{
+	/* Avoid using the NEON in interrupt context */
+	BUG_ON(in_interrupt());
+	preempt_disable();
+
+	if (current->mm)
+		fpsimd_save_state(&current->thread.fpsimd_state);
+}
+EXPORT_SYMBOL(kernel_neon_begin);
+
+void kernel_neon_end(void)
+{
+	if (current->mm)
+		fpsimd_load_state(&current->thread.fpsimd_state);
+
+	preempt_enable();
+}
+EXPORT_SYMBOL(kernel_neon_end);
+
+#endif /* CONFIG_KERNEL_MODE_NEON */
+
 /*
  * FP/SIMD support code initialisation.
  */
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 53dcae4..7009387 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -112,11 +112,20 @@
 	.quad	TEXT_OFFSET			// Image load offset from start of RAM
 	.quad	0				// reserved
 	.quad	0				// reserved
+	.quad	0				// reserved
+	.quad	0				// reserved
+	.quad	0				// reserved
+	.byte	0x41				// Magic number, "ARM\x64"
+	.byte	0x52
+	.byte	0x4d
+	.byte	0x64
+	.word	0				// reserved
 
 ENTRY(stext)
 	mov	x21, x0				// x21=FDT
+	bl	el2_setup			// Drop to EL1, w20=cpu_boot_mode
 	bl	__calc_phys_offset		// x24=PHYS_OFFSET, x28=PHYS_OFFSET-PAGE_OFFSET
-	bl	el2_setup			// Drop to EL1
+	bl	set_cpu_boot_mode_flag
 	mrs	x22, midr_el1			// x22=cpuid
 	mov	x0, x22
 	bl	lookup_processor_type
@@ -142,21 +151,30 @@ ENDPROC(stext)
 /*
  * If we're fortunate enough to boot at EL2, ensure that the world is
  * sane before dropping to EL1.
+ *
+ * Returns either BOOT_CPU_MODE_EL1 or BOOT_CPU_MODE_EL2 in x20 if
+ * booted in EL1 or EL2 respectively.
  */
 ENTRY(el2_setup)
 	mrs	x0, CurrentEL
 	cmp	x0, #PSR_MODE_EL2t
 	ccmp	x0, #PSR_MODE_EL2h, #0x4, ne
-	ldr	x0, =__boot_cpu_mode		// Compute __boot_cpu_mode
-	add	x0, x0, x28
-	b.eq	1f
-	str	wzr, [x0]			// Remember we don't have EL2...
+	b.ne	1f
+	mrs	x0, sctlr_el2
+CPU_BE(	orr	x0, x0, #(1 << 25)	)	// Set the EE bit for EL2
+CPU_LE(	bic	x0, x0, #(1 << 25)	)	// Clear the EE bit for EL2
+	msr	sctlr_el2, x0
+	b	2f
+1:	mrs	x0, sctlr_el1
+CPU_BE(	orr	x0, x0, #(3 << 24)	)	// Set the EE and E0E bits for EL1
+CPU_LE(	bic	x0, x0, #(3 << 24)	)	// Clear the EE and E0E bits for EL1
+	msr	sctlr_el1, x0
+	mov	w20, #BOOT_CPU_MODE_EL1		// This cpu booted in EL1
+	isb
 	ret
 
 	/* Hyp configuration. */
-1:	ldr	w1, =BOOT_CPU_MODE_EL2
-	str	w1, [x0, #4]			// This CPU has EL2
-	mov	x0, #(1 << 31)			// 64-bit EL1
+2:	mov	x0, #(1 << 31)			// 64-bit EL1
 	msr	hcr_el2, x0
 
 	/* Generic timers. */
@@ -173,7 +191,8 @@ ENTRY(el2_setup)
 
 	/* sctlr_el1 */
 	mov	x0, #0x0800			// Set/clear RES{1,0} bits
-	movk	x0, #0x30d0, lsl #16
+CPU_BE(	movk	x0, #0x33d0, lsl #16	)	// Set EE and E0E on BE systems
+CPU_LE(	movk	x0, #0x30d0, lsl #16	)	// Clear EE and E0E on LE systems
 	msr	sctlr_el1, x0
 
 	/* Coprocessor traps. */
@@ -196,10 +215,25 @@ ENTRY(el2_setup)
 		      PSR_MODE_EL1h)
 	msr	spsr_el2, x0
 	msr	elr_el2, lr
+	mov	w20, #BOOT_CPU_MODE_EL2		// This CPU booted in EL2
 	eret
 ENDPROC(el2_setup)
 
 /*
+ * Sets the __boot_cpu_mode flag depending on the CPU boot mode passed
+ * in x20. See arch/arm64/include/asm/virt.h for more info.
+ */
+ENTRY(set_cpu_boot_mode_flag)
+	ldr	x1, =__boot_cpu_mode		// Compute __boot_cpu_mode
+	add	x1, x1, x28
+	cmp	w20, #BOOT_CPU_MODE_EL2
+	b.ne	1f
+	add	x1, x1, #4
+1:	str	w20, [x1]			// This CPU has booted in EL1
+	ret
+ENDPROC(set_cpu_boot_mode_flag)
+
+/*
  * We need to find out the CPU boot mode long after boot, so we need to
  * store it in a writable variable.
  *
@@ -217,7 +251,6 @@ ENTRY(__boot_cpu_mode)
 	.quad	PAGE_OFFSET
 
 #ifdef CONFIG_SMP
-	.pushsection    .smp.pen.text, "ax"
 	.align	3
 1:	.quad	.
 	.quad	secondary_holding_pen_release
@@ -227,8 +260,9 @@ ENTRY(__boot_cpu_mode)
 	 * cores are held until we're ready for them to initialise.
 	 */
 ENTRY(secondary_holding_pen)
-	bl	__calc_phys_offset		// x24=phys offset
-	bl	el2_setup			// Drop to EL1
+	bl	el2_setup			// Drop to EL1, w20=cpu_boot_mode
+	bl	__calc_phys_offset		// x24=PHYS_OFFSET, x28=PHYS_OFFSET-PAGE_OFFSET
+	bl	set_cpu_boot_mode_flag
 	mrs	x0, mpidr_el1
 	ldr     x1, =MPIDR_HWID_BITMASK
 	and	x0, x0, x1
@@ -242,7 +276,16 @@ pen:	ldr	x4, [x3]
 	wfe
 	b	pen
 ENDPROC(secondary_holding_pen)
-	.popsection
+
+	/*
+	 * Secondary entry point that jumps straight into the kernel. Only to
+	 * be used where CPUs are brought online dynamically by the kernel.
+	 */
+ENTRY(secondary_entry)
+	bl	__calc_phys_offset		// x2=phys offset
+	bl	el2_setup			// Drop to EL1
+	b	secondary_startup
+ENDPROC(secondary_entry)
 
 ENTRY(secondary_startup)
 	/*
diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c
index ecb3354..473e5db 100644
--- a/arch/arm64/kernel/irq.c
+++ b/arch/arm64/kernel/irq.c
@@ -81,3 +81,64 @@ void __init init_IRQ(void)
 	if (!handle_arch_irq)
 		panic("No interrupt controller found.");
 }
+
+#ifdef CONFIG_HOTPLUG_CPU
+static bool migrate_one_irq(struct irq_desc *desc)
+{
+	struct irq_data *d = irq_desc_get_irq_data(desc);
+	const struct cpumask *affinity = d->affinity;
+	struct irq_chip *c;
+	bool ret = false;
+
+	/*
+	 * If this is a per-CPU interrupt, or the affinity does not
+	 * include this CPU, then we have nothing to do.
+	 */
+	if (irqd_is_per_cpu(d) || !cpumask_test_cpu(smp_processor_id(), affinity))
+		return false;
+
+	if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
+		affinity = cpu_online_mask;
+		ret = true;
+	}
+
+	c = irq_data_get_irq_chip(d);
+	if (!c->irq_set_affinity)
+		pr_debug("IRQ%u: unable to set affinity\n", d->irq);
+	else if (c->irq_set_affinity(d, affinity, true) == IRQ_SET_MASK_OK && ret)
+		cpumask_copy(d->affinity, affinity);
+
+	return ret;
+}
+
+/*
+ * The current CPU has been marked offline.  Migrate IRQs off this CPU.
+ * If the affinity settings do not allow other CPUs, force them onto any
+ * available CPU.
+ *
+ * Note: we must iterate over all IRQs, whether they have an attached
+ * action structure or not, as we need to get chained interrupts too.
+ */
+void migrate_irqs(void)
+{
+	unsigned int i;
+	struct irq_desc *desc;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	for_each_irq_desc(i, desc) {
+		bool affinity_broken;
+
+		raw_spin_lock(&desc->lock);
+		affinity_broken = migrate_one_irq(desc);
+		raw_spin_unlock(&desc->lock);
+
+		if (affinity_broken)
+			pr_warn_ratelimited("IRQ%u no longer affine to CPU%u\n",
+					    i, smp_processor_id());
+	}
+
+	local_irq_restore(flags);
+}
+#endif /* CONFIG_HOTPLUG_CPU */
diff --git a/arch/arm64/kernel/kuser32.S b/arch/arm64/kernel/kuser32.S
index 8b69ecb..63c48ff 100644
--- a/arch/arm64/kernel/kuser32.S
+++ b/arch/arm64/kernel/kuser32.S
@@ -27,6 +27,9 @@
  *
  * See Documentation/arm/kernel_user_helpers.txt for formal definitions.
  */
+
+#include <asm/unistd32.h>
+
 	.align	5
 	.globl	__kuser_helper_start
 __kuser_helper_start:
@@ -35,33 +38,30 @@ __kuser_cmpxchg64:			// 0xffff0f60
 	.inst	0xe92d00f0		//	push		{r4, r5, r6, r7}
 	.inst	0xe1c040d0		//	ldrd		r4, r5, [r0]
 	.inst	0xe1c160d0		//	ldrd		r6, r7, [r1]
-	.inst	0xf57ff05f		//	dmb		sy
-	.inst	0xe1b20f9f		// 1:	ldrexd		r0, r1, [r2]
+	.inst	0xe1b20e9f		// 1:	ldaexd		r0, r1, [r2]
 	.inst	0xe0303004		//	eors		r3, r0, r4
 	.inst	0x00313005		//	eoreqs		r3, r1, r5
-	.inst	0x01a23f96		//	strexdeq	r3, r6, [r2]
+	.inst	0x01a23e96		//	stlexdeq	r3, r6, [r2]
 	.inst	0x03330001		//	teqeq		r3, #1
 	.inst	0x0afffff9		//	beq		1b
-	.inst	0xf57ff05f		//	dmb		sy
 	.inst	0xe2730000		//	rsbs		r0, r3, #0
 	.inst	0xe8bd00f0		//	pop		{r4, r5, r6, r7}
 	.inst	0xe12fff1e		//	bx		lr
 
 	.align	5
 __kuser_memory_barrier:			// 0xffff0fa0
-	.inst	0xf57ff05f		//	dmb		sy
+	.inst	0xf57ff05b		//	dmb		ish
 	.inst	0xe12fff1e		//	bx		lr
 
 	.align	5
 __kuser_cmpxchg:			// 0xffff0fc0
-	.inst	0xf57ff05f		//	dmb		sy
-	.inst	0xe1923f9f		// 1:	ldrex		r3, [r2]
+	.inst	0xe1923e9f		// 1:	ldaex		r3, [r2]
 	.inst	0xe0533000		//	subs		r3, r3, r0
-	.inst	0x01823f91		//	strexeq	r3, r1, [r2]
+	.inst	0x01823e91		//	stlexeq		r3, r1, [r2]
 	.inst	0x03330001		//	teqeq		r3, #1
 	.inst	0x0afffffa		//	beq		1b
 	.inst	0xe2730000		//	rsbs		r0, r3, #0
-	.inst	0xeaffffef		//	b		<__kuser_memory_barrier>
+	.inst	0xe12fff1e		//	bx		lr
 
 	.align	5
 __kuser_get_tls:			// 0xffff0fe0
@@ -75,3 +75,42 @@ __kuser_helper_version:			// 0xffff0ffc
 	.word	((__kuser_helper_end - __kuser_helper_start) >> 5)
 	.globl	__kuser_helper_end
 __kuser_helper_end:
+
+/*
+ * AArch32 sigreturn code
+ *
+ * For ARM syscalls, the syscall number has to be loaded into r7.
+ * We do not support an OABI userspace.
+ *
+ * For Thumb syscalls, we also pass the syscall number via r7. We therefore
+ * need two 16-bit instructions.
+ */
+	.globl __aarch32_sigret_code_start
+__aarch32_sigret_code_start:
+
+	/*
+	 * ARM Code
+	 */
+	.byte	__NR_compat_sigreturn, 0x70, 0xa0, 0xe3	// mov	r7, #__NR_compat_sigreturn
+	.byte	__NR_compat_sigreturn, 0x00, 0x00, 0xef	// svc	#__NR_compat_sigreturn
+
+	/*
+	 * Thumb code
+	 */
+	.byte	__NR_compat_sigreturn, 0x27			// svc	#__NR_compat_sigreturn
+	.byte	__NR_compat_sigreturn, 0xdf			// mov	r7, #__NR_compat_sigreturn
+
+	/*
+	 * ARM code
+	 */
+	.byte	__NR_compat_rt_sigreturn, 0x70, 0xa0, 0xe3	// mov	r7, #__NR_compat_rt_sigreturn
+	.byte	__NR_compat_rt_sigreturn, 0x00, 0x00, 0xef	// svc	#__NR_compat_rt_sigreturn
+
+	/*
+	 * Thumb code
+	 */
+	.byte	__NR_compat_rt_sigreturn, 0x27			// svc	#__NR_compat_rt_sigreturn
+	.byte	__NR_compat_rt_sigreturn, 0xdf			// mov	r7, #__NR_compat_rt_sigreturn
+
+        .globl __aarch32_sigret_code_end
+__aarch32_sigret_code_end:
diff --git a/arch/arm64/kernel/module.c b/arch/arm64/kernel/module.c
index ca0e3d5..2c28a6c 100644
--- a/arch/arm64/kernel/module.c
+++ b/arch/arm64/kernel/module.c
@@ -111,6 +111,9 @@ static u32 encode_insn_immediate(enum aarch64_imm_type type, u32 insn, u64 imm)
 	u32 immlo, immhi, lomask, himask, mask;
 	int shift;
 
+	/* The instruction stream is always little endian. */
+	insn = le32_to_cpu(insn);
+
 	switch (type) {
 	case INSN_IMM_MOVNZ:
 		/*
@@ -179,7 +182,7 @@ static u32 encode_insn_immediate(enum aarch64_imm_type type, u32 insn, u64 imm)
 	insn &= ~(mask << shift);
 	insn |= (imm & mask) << shift;
 
-	return insn;
+	return cpu_to_le32(insn);
 }
 
 static int reloc_insn_movw(enum aarch64_reloc_op op, void *place, u64 val,
diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
index 12e6ccb..5d14470 100644
--- a/arch/arm64/kernel/perf_event.c
+++ b/arch/arm64/kernel/perf_event.c
@@ -325,7 +325,10 @@ validate_event(struct pmu_hw_events *hw_events,
 	if (is_software_event(event))
 		return 1;
 
-	if (event->pmu != leader_pmu || event->state <= PERF_EVENT_STATE_OFF)
+	if (event->pmu != leader_pmu || event->state < PERF_EVENT_STATE_OFF)
+		return 1;
+
+	if (event->state == PERF_EVENT_STATE_OFF && !event->attr.enable_on_exec)
 		return 1;
 
 	return armpmu->get_event_idx(hw_events, &fake_event) >= 0;
@@ -781,8 +784,8 @@ static const unsigned armv8_pmuv3_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 /*
  * PMXEVTYPER: Event selection reg
  */
-#define	ARMV8_EVTYPE_MASK	0xc00000ff	/* Mask for writable bits */
-#define	ARMV8_EVTYPE_EVENT	0xff		/* Mask for EVENT bits */
+#define	ARMV8_EVTYPE_MASK	0xc80003ff	/* Mask for writable bits */
+#define	ARMV8_EVTYPE_EVENT	0x3ff		/* Mask for EVENT bits */
 
 /*
  * Event filters for PMUv3
@@ -1172,7 +1175,8 @@ static void armv8pmu_reset(void *info)
 static int armv8_pmuv3_map_event(struct perf_event *event)
 {
 	return map_cpu_event(event, &armv8_pmuv3_perf_map,
-				&armv8_pmuv3_perf_cache_map, 0xFF);
+				&armv8_pmuv3_perf_cache_map,
+				ARMV8_EVTYPE_EVENT);
 }
 
 static struct arm_pmu armv8pmu = {
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index 57fb55c..de17c89 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -102,6 +102,13 @@ void arch_cpu_idle(void)
 	local_irq_enable();
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+void arch_cpu_idle_dead(void)
+{
+       cpu_die();
+}
+#endif
+
 void machine_shutdown(void)
 {
 #ifdef CONFIG_SMP
@@ -143,15 +150,26 @@ void machine_restart(char *cmd)
 
 void __show_regs(struct pt_regs *regs)
 {
-	int i;
+	int i, top_reg;
+	u64 lr, sp;
+
+	if (compat_user_mode(regs)) {
+		lr = regs->compat_lr;
+		sp = regs->compat_sp;
+		top_reg = 12;
+	} else {
+		lr = regs->regs[30];
+		sp = regs->sp;
+		top_reg = 29;
+	}
 
 	show_regs_print_info(KERN_DEFAULT);
 	print_symbol("PC is at %s\n", instruction_pointer(regs));
-	print_symbol("LR is at %s\n", regs->regs[30]);
+	print_symbol("LR is at %s\n", lr);
 	printk("pc : [<%016llx>] lr : [<%016llx>] pstate: %08llx\n",
-	       regs->pc, regs->regs[30], regs->pstate);
-	printk("sp : %016llx\n", regs->sp);
-	for (i = 29; i >= 0; i--) {
+	       regs->pc, lr, regs->pstate);
+	printk("sp : %016llx\n", sp);
+	for (i = top_reg; i >= 0; i--) {
 		printk("x%-2d: %016llx ", i, regs->regs[i]);
 		if (i % 2 == 0)
 			printk("\n");
diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c
index 14f73c4..4f97db3 100644
--- a/arch/arm64/kernel/psci.c
+++ b/arch/arm64/kernel/psci.c
@@ -17,12 +17,32 @@
 
 #include <linux/init.h>
 #include <linux/of.h>
+#include <linux/smp.h>
 
 #include <asm/compiler.h>
+#include <asm/cpu_ops.h>
 #include <asm/errno.h>
 #include <asm/psci.h>
+#include <asm/smp_plat.h>
 
-struct psci_operations psci_ops;
+#define PSCI_POWER_STATE_TYPE_STANDBY		0
+#define PSCI_POWER_STATE_TYPE_POWER_DOWN	1
+
+struct psci_power_state {
+	u16	id;
+	u8	type;
+	u8	affinity_level;
+};
+
+struct psci_operations {
+	int (*cpu_suspend)(struct psci_power_state state,
+			   unsigned long entry_point);
+	int (*cpu_off)(struct psci_power_state state);
+	int (*cpu_on)(unsigned long cpuid, unsigned long entry_point);
+	int (*migrate)(unsigned long cpuid);
+};
+
+static struct psci_operations psci_ops;
 
 static int (*invoke_psci_fn)(u64, u64, u64, u64);
 
@@ -209,3 +229,68 @@ out_put_node:
 	of_node_put(np);
 	return err;
 }
+
+#ifdef CONFIG_SMP
+
+static int __init cpu_psci_cpu_init(struct device_node *dn, unsigned int cpu)
+{
+	return 0;
+}
+
+static int __init cpu_psci_cpu_prepare(unsigned int cpu)
+{
+	if (!psci_ops.cpu_on) {
+		pr_err("no cpu_on method, not booting CPU%d\n", cpu);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int cpu_psci_cpu_boot(unsigned int cpu)
+{
+	int err = psci_ops.cpu_on(cpu_logical_map(cpu), __pa(secondary_entry));
+	if (err)
+		pr_err("psci: failed to boot CPU%d (%d)\n", cpu, err);
+
+	return err;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static int cpu_psci_cpu_disable(unsigned int cpu)
+{
+	/* Fail early if we don't have CPU_OFF support */
+	if (!psci_ops.cpu_off)
+		return -EOPNOTSUPP;
+	return 0;
+}
+
+static void cpu_psci_cpu_die(unsigned int cpu)
+{
+	int ret;
+	/*
+	 * There are no known implementations of PSCI actually using the
+	 * power state field, pass a sensible default for now.
+	 */
+	struct psci_power_state state = {
+		.type = PSCI_POWER_STATE_TYPE_POWER_DOWN,
+	};
+
+	ret = psci_ops.cpu_off(state);
+
+	pr_crit("psci: unable to power off CPU%u (%d)\n", cpu, ret);
+}
+#endif
+
+const struct cpu_operations cpu_psci_ops = {
+	.name		= "psci",
+	.cpu_init	= cpu_psci_cpu_init,
+	.cpu_prepare	= cpu_psci_cpu_prepare,
+	.cpu_boot	= cpu_psci_cpu_boot,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_disable	= cpu_psci_cpu_disable,
+	.cpu_die	= cpu_psci_cpu_die,
+#endif
+};
+
+#endif
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index add6ea6..9cf30f4 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -45,6 +45,7 @@
 #include <asm/cputype.h>
 #include <asm/elf.h>
 #include <asm/cputable.h>
+#include <asm/cpu_ops.h>
 #include <asm/sections.h>
 #include <asm/setup.h>
 #include <asm/smp_plat.h>
@@ -57,7 +58,7 @@
 unsigned int processor_id;
 EXPORT_SYMBOL(processor_id);
 
-unsigned int elf_hwcap __read_mostly;
+unsigned long elf_hwcap __read_mostly;
 EXPORT_SYMBOL_GPL(elf_hwcap);
 
 static const char *cpu_name;
@@ -97,6 +98,11 @@ void __init early_print(const char *str, ...)
 	printk("%s", buf);
 }
 
+bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
+{
+	return phys_id == cpu_logical_map(cpu);
+}
+
 static void __init setup_processor(void)
 {
 	struct cpu_info *cpu_info;
@@ -118,7 +124,7 @@ static void __init setup_processor(void)
 	printk("CPU: %s [%08x] revision %d\n",
 	       cpu_name, read_cpuid_id(), read_cpuid_id() & 15);
 
-	sprintf(init_utsname()->machine, "aarch64");
+	sprintf(init_utsname()->machine, ELF_PLATFORM);
 	elf_hwcap = 0;
 }
 
@@ -190,11 +196,6 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 	memblock_add(base, size);
 }
 
-void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
-{
-	return __va(memblock_alloc(size, align));
-}
-
 /*
  * Limit the memory size that was specified via FDT.
  */
@@ -269,6 +270,7 @@ void __init setup_arch(char **cmdline_p)
 	psci_init();
 
 	cpu_logical_map(0) = read_cpuid_mpidr() & MPIDR_HWID_BITMASK;
+	cpu_read_bootcpu_ops();
 #ifdef CONFIG_SMP
 	smp_init_cpus();
 #endif
@@ -328,9 +330,6 @@ static int c_show(struct seq_file *m, void *v)
 #ifdef CONFIG_SMP
 		seq_printf(m, "processor\t: %d\n", i);
 #endif
-		seq_printf(m, "BogoMIPS\t: %lu.%02lu\n\n",
-			   loops_per_jiffy / (500000UL/HZ),
-			   loops_per_jiffy / (5000UL/HZ) % 100);
 	}
 
 	/* dump out the processor features */
diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c
index e393174..e51bbe7 100644
--- a/arch/arm64/kernel/signal32.c
+++ b/arch/arm64/kernel/signal32.c
@@ -100,34 +100,6 @@ struct compat_rt_sigframe {
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
-/*
- * For ARM syscalls, the syscall number has to be loaded into r7.
- * We do not support an OABI userspace.
- */
-#define MOV_R7_NR_SIGRETURN	(0xe3a07000 | __NR_compat_sigreturn)
-#define SVC_SYS_SIGRETURN	(0xef000000 | __NR_compat_sigreturn)
-#define MOV_R7_NR_RT_SIGRETURN	(0xe3a07000 | __NR_compat_rt_sigreturn)
-#define SVC_SYS_RT_SIGRETURN	(0xef000000 | __NR_compat_rt_sigreturn)
-
-/*
- * For Thumb syscalls, we also pass the syscall number via r7. We therefore
- * need two 16-bit instructions.
- */
-#define SVC_THUMB_SIGRETURN	(((0xdf00 | __NR_compat_sigreturn) << 16) | \
-				   0x2700 | __NR_compat_sigreturn)
-#define SVC_THUMB_RT_SIGRETURN	(((0xdf00 | __NR_compat_rt_sigreturn) << 16) | \
-				   0x2700 | __NR_compat_rt_sigreturn)
-
-const compat_ulong_t aarch32_sigret_code[6] = {
-	/*
-	 * AArch32 sigreturn code.
-	 * We don't construct an OABI SWI - instead we just set the imm24 field
-	 * to the EABI syscall number so that we create a sane disassembly.
-	 */
-	MOV_R7_NR_SIGRETURN,    SVC_SYS_SIGRETURN,    SVC_THUMB_SIGRETURN,
-	MOV_R7_NR_RT_SIGRETURN, SVC_SYS_RT_SIGRETURN, SVC_THUMB_RT_SIGRETURN,
-};
-
 static inline int put_sigset_t(compat_sigset_t __user *uset, sigset_t *set)
 {
 	compat_sigset_t	cset;
@@ -474,12 +446,13 @@ static void compat_setup_return(struct pt_regs *regs, struct k_sigaction *ka,
 	/* Check if the handler is written for ARM or Thumb */
 	thumb = handler & 1;
 
-	if (thumb) {
+	if (thumb)
 		spsr |= COMPAT_PSR_T_BIT;
-		spsr &= ~COMPAT_PSR_IT_MASK;
-	} else {
+	else
 		spsr &= ~COMPAT_PSR_T_BIT;
-	}
+
+	/* The IT state must be cleared for both ARM and Thumb-2 */
+	spsr &= ~COMPAT_PSR_IT_MASK;
 
 	if (ka->sa.sa_flags & SA_RESTORER) {
 		retcode = ptr_to_compat(ka->sa.sa_restorer);
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index fee5cce..a5aeefa 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -39,6 +39,7 @@
 #include <asm/atomic.h>
 #include <asm/cacheflush.h>
 #include <asm/cputype.h>
+#include <asm/cpu_ops.h>
 #include <asm/mmu_context.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
@@ -54,7 +55,6 @@
  * where to place its SVC stack
  */
 struct secondary_data secondary_data;
-volatile unsigned long secondary_holding_pen_release = INVALID_HWID;
 
 enum ipi_msg_type {
 	IPI_RESCHEDULE,
@@ -63,61 +63,16 @@ enum ipi_msg_type {
 	IPI_CPU_STOP,
 };
 
-static DEFINE_RAW_SPINLOCK(boot_lock);
-
-/*
- * Write secondary_holding_pen_release in a way that is guaranteed to be
- * visible to all observers, irrespective of whether they're taking part
- * in coherency or not.  This is necessary for the hotplug code to work
- * reliably.
- */
-static void write_pen_release(u64 val)
-{
-	void *start = (void *)&secondary_holding_pen_release;
-	unsigned long size = sizeof(secondary_holding_pen_release);
-
-	secondary_holding_pen_release = val;
-	__flush_dcache_area(start, size);
-}
-
 /*
  * Boot a secondary CPU, and assign it the specified idle task.
  * This also gives us the initial stack to use for this CPU.
  */
 static int boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	unsigned long timeout;
-
-	/*
-	 * Set synchronisation state between this boot processor
-	 * and the secondary one
-	 */
-	raw_spin_lock(&boot_lock);
-
-	/*
-	 * Update the pen release flag.
-	 */
-	write_pen_release(cpu_logical_map(cpu));
-
-	/*
-	 * Send an event, causing the secondaries to read pen_release.
-	 */
-	sev();
-
-	timeout = jiffies + (1 * HZ);
-	while (time_before(jiffies, timeout)) {
-		if (secondary_holding_pen_release == INVALID_HWID)
-			break;
-		udelay(10);
-	}
-
-	/*
-	 * Now the secondary core is starting up let it run its
-	 * calibrations, then wait for it to finish
-	 */
-	raw_spin_unlock(&boot_lock);
+	if (cpu_ops[cpu]->cpu_boot)
+		return cpu_ops[cpu]->cpu_boot(cpu);
 
-	return secondary_holding_pen_release != INVALID_HWID ? -ENOSYS : 0;
+	return -EOPNOTSUPP;
 }
 
 static DECLARE_COMPLETION(cpu_running);
@@ -187,17 +142,13 @@ asmlinkage void secondary_start_kernel(void)
 	preempt_disable();
 	trace_hardirqs_off();
 
-	/*
-	 * Let the primary processor know we're out of the
-	 * pen, then head off into the C entry point
-	 */
-	write_pen_release(INVALID_HWID);
+	if (cpu_ops[cpu]->cpu_postboot)
+		cpu_ops[cpu]->cpu_postboot();
 
 	/*
-	 * Synchronise with the boot thread.
+	 * Enable GIC and timers.
 	 */
-	raw_spin_lock(&boot_lock);
-	raw_spin_unlock(&boot_lock);
+	notify_cpu_starting(cpu);
 
 	/*
 	 * OK, now it's safe to let the boot CPU continue.  Wait for
@@ -207,11 +158,6 @@ asmlinkage void secondary_start_kernel(void)
 	set_cpu_online(cpu, true);
 	complete(&cpu_running);
 
-	/*
-	 * Enable GIC and timers.
-	 */
-	notify_cpu_starting(cpu);
-
 	local_irq_enable();
 	local_fiq_enable();
 
@@ -221,43 +167,113 @@ asmlinkage void secondary_start_kernel(void)
 	cpu_startup_entry(CPUHP_ONLINE);
 }
 
-void __init smp_cpus_done(unsigned int max_cpus)
+#ifdef CONFIG_HOTPLUG_CPU
+static int op_cpu_disable(unsigned int cpu)
 {
-	unsigned long bogosum = loops_per_jiffy * num_online_cpus();
+	/*
+	 * If we don't have a cpu_die method, abort before we reach the point
+	 * of no return. CPU0 may not have an cpu_ops, so test for it.
+	 */
+	if (!cpu_ops[cpu] || !cpu_ops[cpu]->cpu_die)
+		return -EOPNOTSUPP;
 
-	pr_info("SMP: Total of %d processors activated (%lu.%02lu BogoMIPS).\n",
-		num_online_cpus(), bogosum / (500000/HZ),
-		(bogosum / (5000/HZ)) % 100);
+	/*
+	 * We may need to abort a hot unplug for some other mechanism-specific
+	 * reason.
+	 */
+	if (cpu_ops[cpu]->cpu_disable)
+		return cpu_ops[cpu]->cpu_disable(cpu);
+
+	return 0;
 }
 
-void __init smp_prepare_boot_cpu(void)
+/*
+ * __cpu_disable runs on the processor to be shutdown.
+ */
+int __cpu_disable(void)
 {
-}
+	unsigned int cpu = smp_processor_id();
+	int ret;
 
-static void (*smp_cross_call)(const struct cpumask *, unsigned int);
+	ret = op_cpu_disable(cpu);
+	if (ret)
+		return ret;
 
-static const struct smp_enable_ops *enable_ops[] __initconst = {
-	&smp_spin_table_ops,
-	&smp_psci_ops,
-	NULL,
-};
+	/*
+	 * Take this CPU offline.  Once we clear this, we can't return,
+	 * and we must not schedule until we're ready to give up the cpu.
+	 */
+	set_cpu_online(cpu, false);
 
-static const struct smp_enable_ops *smp_enable_ops[NR_CPUS];
+	/*
+	 * OK - migrate IRQs away from this CPU
+	 */
+	migrate_irqs();
 
-static const struct smp_enable_ops * __init smp_get_enable_ops(const char *name)
-{
-	const struct smp_enable_ops **ops = enable_ops;
+	/*
+	 * Remove this CPU from the vm mask set of all processes.
+	 */
+	clear_tasks_mm_cpumask(cpu);
+
+	return 0;
+}
 
-	while (*ops) {
-		if (!strcmp(name, (*ops)->name))
-			return *ops;
+static DECLARE_COMPLETION(cpu_died);
 
-		ops++;
+/*
+ * called on the thread which is asking for a CPU to be shutdown -
+ * waits until shutdown has completed, or it is timed out.
+ */
+void __cpu_die(unsigned int cpu)
+{
+	if (!wait_for_completion_timeout(&cpu_died, msecs_to_jiffies(5000))) {
+		pr_crit("CPU%u: cpu didn't die\n", cpu);
+		return;
 	}
+	pr_notice("CPU%u: shutdown\n", cpu);
+}
 
-	return NULL;
+/*
+ * Called from the idle thread for the CPU which has been shutdown.
+ *
+ * Note that we disable IRQs here, but do not re-enable them
+ * before returning to the caller. This is also the behaviour
+ * of the other hotplug-cpu capable cores, so presumably coming
+ * out of idle fixes this.
+ */
+void cpu_die(void)
+{
+	unsigned int cpu = smp_processor_id();
+
+	idle_task_exit();
+
+	local_irq_disable();
+
+	/* Tell __cpu_die() that this CPU is now safe to dispose of */
+	complete(&cpu_died);
+
+	/*
+	 * Actually shutdown the CPU. This must never fail. The specific hotplug
+	 * mechanism must perform all required cache maintenance to ensure that
+	 * no dirty lines are lost in the process of shutting down the CPU.
+	 */
+	cpu_ops[cpu]->cpu_die(cpu);
+
+	BUG();
+}
+#endif
+
+void __init smp_cpus_done(unsigned int max_cpus)
+{
+	pr_info("SMP: Total of %d processors activated.\n", num_online_cpus());
+}
+
+void __init smp_prepare_boot_cpu(void)
+{
 }
 
+static void (*smp_cross_call)(const struct cpumask *, unsigned int);
+
 /*
  * Enumerate the possible CPU set from the device tree and build the
  * cpu logical map array containing MPIDR values related to logical
@@ -265,9 +281,8 @@ static const struct smp_enable_ops * __init smp_get_enable_ops(const char *name)
  */
 void __init smp_init_cpus(void)
 {
-	const char *enable_method;
 	struct device_node *dn = NULL;
-	int i, cpu = 1;
+	unsigned int i, cpu = 1;
 	bool bootcpu_valid = false;
 
 	while ((dn = of_find_node_by_type(dn, "cpu"))) {
@@ -336,25 +351,10 @@ void __init smp_init_cpus(void)
 		if (cpu >= NR_CPUS)
 			goto next;
 
-		/*
-		 * We currently support only the "spin-table" enable-method.
-		 */
-		enable_method = of_get_property(dn, "enable-method", NULL);
-		if (!enable_method) {
-			pr_err("%s: missing enable-method property\n",
-				dn->full_name);
+		if (cpu_read_ops(dn, cpu) != 0)
 			goto next;
-		}
-
-		smp_enable_ops[cpu] = smp_get_enable_ops(enable_method);
-
-		if (!smp_enable_ops[cpu]) {
-			pr_err("%s: invalid enable-method property: %s\n",
-			       dn->full_name, enable_method);
-			goto next;
-		}
 
-		if (smp_enable_ops[cpu]->init_cpu(dn, cpu))
+		if (cpu_ops[cpu]->cpu_init(dn, cpu))
 			goto next;
 
 		pr_debug("cpu logical map 0x%llx\n", hwid);
@@ -384,8 +384,8 @@ next:
 
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
-	int cpu, err;
-	unsigned int ncores = num_possible_cpus();
+	int err;
+	unsigned int cpu, ncores = num_possible_cpus();
 
 	/*
 	 * are we trying to boot more cores than exist?
@@ -412,10 +412,10 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 		if (cpu == smp_processor_id())
 			continue;
 
-		if (!smp_enable_ops[cpu])
+		if (!cpu_ops[cpu])
 			continue;
 
-		err = smp_enable_ops[cpu]->prepare_cpu(cpu);
+		err = cpu_ops[cpu]->cpu_prepare(cpu);
 		if (err)
 			continue;
 
@@ -455,7 +455,7 @@ void show_ipi_list(struct seq_file *p, int prec)
 	for (i = 0; i < NR_IPI; i++) {
 		seq_printf(p, "%*s%u:%s", prec - 1, "IPI", i + IPI_RESCHEDULE,
 			   prec >= 4 ? " " : "");
-		for_each_present_cpu(cpu)
+		for_each_online_cpu(cpu)
 			seq_printf(p, "%10u ",
 				   __get_irq_stat(cpu, ipi_irqs[i]));
 		seq_printf(p, "      %s\n", ipi_types[i]);
diff --git a/arch/arm64/kernel/smp_psci.c b/arch/arm64/kernel/smp_psci.c
deleted file mode 100644
index 0c53330..0000000
--- a/arch/arm64/kernel/smp_psci.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * PSCI SMP initialisation
- *
- * Copyright (C) 2013 ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/smp.h>
-
-#include <asm/psci.h>
-#include <asm/smp_plat.h>
-
-static int __init smp_psci_init_cpu(struct device_node *dn, int cpu)
-{
-	return 0;
-}
-
-static int __init smp_psci_prepare_cpu(int cpu)
-{
-	int err;
-
-	if (!psci_ops.cpu_on) {
-		pr_err("psci: no cpu_on method, not booting CPU%d\n", cpu);
-		return -ENODEV;
-	}
-
-	err = psci_ops.cpu_on(cpu_logical_map(cpu), __pa(secondary_holding_pen));
-	if (err) {
-		pr_err("psci: failed to boot CPU%d (%d)\n", cpu, err);
-		return err;
-	}
-
-	return 0;
-}
-
-const struct smp_enable_ops smp_psci_ops __initconst = {
-	.name		= "psci",
-	.init_cpu	= smp_psci_init_cpu,
-	.prepare_cpu	= smp_psci_prepare_cpu,
-};
diff --git a/arch/arm64/kernel/smp_spin_table.c b/arch/arm64/kernel/smp_spin_table.c
index 7c35fa6..44c2280 100644
--- a/arch/arm64/kernel/smp_spin_table.c
+++ b/arch/arm64/kernel/smp_spin_table.c
@@ -16,15 +16,39 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/of.h>
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
+#include <asm/cpu_ops.h>
+#include <asm/cputype.h>
+#include <asm/smp_plat.h>
+
+extern void secondary_holding_pen(void);
+volatile unsigned long secondary_holding_pen_release = INVALID_HWID;
 
 static phys_addr_t cpu_release_addr[NR_CPUS];
+static DEFINE_RAW_SPINLOCK(boot_lock);
+
+/*
+ * Write secondary_holding_pen_release in a way that is guaranteed to be
+ * visible to all observers, irrespective of whether they're taking part
+ * in coherency or not.  This is necessary for the hotplug code to work
+ * reliably.
+ */
+static void write_pen_release(u64 val)
+{
+	void *start = (void *)&secondary_holding_pen_release;
+	unsigned long size = sizeof(secondary_holding_pen_release);
 
-static int __init smp_spin_table_init_cpu(struct device_node *dn, int cpu)
+	secondary_holding_pen_release = val;
+	__flush_dcache_area(start, size);
+}
+
+
+static int smp_spin_table_cpu_init(struct device_node *dn, unsigned int cpu)
 {
 	/*
 	 * Determine the address from which the CPU is polling.
@@ -40,7 +64,7 @@ static int __init smp_spin_table_init_cpu(struct device_node *dn, int cpu)
 	return 0;
 }
 
-static int __init smp_spin_table_prepare_cpu(int cpu)
+static int smp_spin_table_cpu_prepare(unsigned int cpu)
 {
 	void **release_addr;
 
@@ -48,7 +72,16 @@ static int __init smp_spin_table_prepare_cpu(int cpu)
 		return -ENODEV;
 
 	release_addr = __va(cpu_release_addr[cpu]);
-	release_addr[0] = (void *)__pa(secondary_holding_pen);
+
+	/*
+	 * We write the release address as LE regardless of the native
+	 * endianess of the kernel. Therefore, any boot-loaders that
+	 * read this address need to convert this address to the
+	 * boot-loader's endianess before jumping. This is mandated by
+	 * the boot protocol.
+	 */
+	release_addr[0] = (void *) cpu_to_le64(__pa(secondary_holding_pen));
+
 	__flush_dcache_area(release_addr, sizeof(release_addr[0]));
 
 	/*
@@ -59,8 +92,60 @@ static int __init smp_spin_table_prepare_cpu(int cpu)
 	return 0;
 }
 
-const struct smp_enable_ops smp_spin_table_ops __initconst = {
+static int smp_spin_table_cpu_boot(unsigned int cpu)
+{
+	unsigned long timeout;
+
+	/*
+	 * Set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	raw_spin_lock(&boot_lock);
+
+	/*
+	 * Update the pen release flag.
+	 */
+	write_pen_release(cpu_logical_map(cpu));
+
+	/*
+	 * Send an event, causing the secondaries to read pen_release.
+	 */
+	sev();
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		if (secondary_holding_pen_release == INVALID_HWID)
+			break;
+		udelay(10);
+	}
+
+	/*
+	 * Now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	raw_spin_unlock(&boot_lock);
+
+	return secondary_holding_pen_release != INVALID_HWID ? -ENOSYS : 0;
+}
+
+void smp_spin_table_cpu_postboot(void)
+{
+	/*
+	 * Let the primary processor know we're out of the pen.
+	 */
+	write_pen_release(INVALID_HWID);
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	raw_spin_lock(&boot_lock);
+	raw_spin_unlock(&boot_lock);
+}
+
+const struct cpu_operations smp_spin_table_ops = {
 	.name		= "spin-table",
-	.init_cpu 	= smp_spin_table_init_cpu,
-	.prepare_cpu	= smp_spin_table_prepare_cpu,
+	.cpu_init	= smp_spin_table_cpu_init,
+	.cpu_prepare	= smp_spin_table_cpu_prepare,
+	.cpu_boot	= smp_spin_table_cpu_boot,
+	.cpu_postboot	= smp_spin_table_cpu_postboot,
 };
diff --git a/arch/arm64/kernel/sys32.S b/arch/arm64/kernel/sys32.S
index a1b19ed..423a5b3 100644
--- a/arch/arm64/kernel/sys32.S
+++ b/arch/arm64/kernel/sys32.S
@@ -59,48 +59,48 @@ ENDPROC(compat_sys_fstatfs64_wrapper)
  * extension.
  */
 compat_sys_pread64_wrapper:
-	orr	x3, x4, x5, lsl #32
+	regs_to_64	x3, x4, x5
 	b	sys_pread64
 ENDPROC(compat_sys_pread64_wrapper)
 
 compat_sys_pwrite64_wrapper:
-	orr	x3, x4, x5, lsl #32
+	regs_to_64	x3, x4, x5
 	b	sys_pwrite64
 ENDPROC(compat_sys_pwrite64_wrapper)
 
 compat_sys_truncate64_wrapper:
-	orr	x1, x2, x3, lsl #32
+	regs_to_64	x1, x2, x3
 	b	sys_truncate
 ENDPROC(compat_sys_truncate64_wrapper)
 
 compat_sys_ftruncate64_wrapper:
-	orr	x1, x2, x3, lsl #32
+	regs_to_64	x1, x2, x3
 	b	sys_ftruncate
 ENDPROC(compat_sys_ftruncate64_wrapper)
 
 compat_sys_readahead_wrapper:
-	orr	x1, x2, x3, lsl #32
+	regs_to_64	x1, x2, x3
 	mov	w2, w4
 	b	sys_readahead
 ENDPROC(compat_sys_readahead_wrapper)
 
 compat_sys_fadvise64_64_wrapper:
 	mov	w6, w1
-	orr	x1, x2, x3, lsl #32
-	orr	x2, x4, x5, lsl #32
+	regs_to_64	x1, x2, x3
+	regs_to_64	x2, x4, x5
 	mov	w3, w6
 	b	sys_fadvise64_64
 ENDPROC(compat_sys_fadvise64_64_wrapper)
 
 compat_sys_sync_file_range2_wrapper:
-	orr	x2, x2, x3, lsl #32
-	orr	x3, x4, x5, lsl #32
+	regs_to_64	x2, x2, x3
+	regs_to_64	x3, x4, x5
 	b	sys_sync_file_range2
 ENDPROC(compat_sys_sync_file_range2_wrapper)
 
 compat_sys_fallocate_wrapper:
-	orr	x2, x2, x3, lsl #32
-	orr	x3, x4, x5, lsl #32
+	regs_to_64	x2, x2, x3
+	regs_to_64	x3, x4, x5
 	b	sys_fallocate
 ENDPROC(compat_sys_fallocate_wrapper)
 
diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c
index 6a389dc..65d40cf 100644
--- a/arch/arm64/kernel/vdso.c
+++ b/arch/arm64/kernel/vdso.c
@@ -58,7 +58,10 @@ static struct page *vectors_page[1];
 static int alloc_vectors_page(void)
 {
 	extern char __kuser_helper_start[], __kuser_helper_end[];
+	extern char __aarch32_sigret_code_start[], __aarch32_sigret_code_end[];
+
 	int kuser_sz = __kuser_helper_end - __kuser_helper_start;
+	int sigret_sz = __aarch32_sigret_code_end - __aarch32_sigret_code_start;
 	unsigned long vpage;
 
 	vpage = get_zeroed_page(GFP_ATOMIC);
@@ -72,7 +75,7 @@ static int alloc_vectors_page(void)
 
 	/* sigreturn code */
 	memcpy((void *)vpage + AARCH32_KERN_SIGRET_CODE_OFFSET,
-		aarch32_sigret_code, sizeof(aarch32_sigret_code));
+               __aarch32_sigret_code_start, sigret_sz);
 
 	flush_icache_range(vpage, vpage + PAGE_SIZE);
 	vectors_page[0] = virt_to_page(vpage);
diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S
index f5e5574..5161ad9 100644
--- a/arch/arm64/kernel/vmlinux.lds.S
+++ b/arch/arm64/kernel/vmlinux.lds.S
@@ -54,7 +54,6 @@ SECTIONS
 	}
 	.text : {			/* Real text segment		*/
 		_stext = .;		/* Text and read-only data	*/
-			*(.smp.pen.text)
 			__exception_text_start = .;
 			*(.exception.text)
 			__exception_text_end = .;
@@ -71,6 +70,7 @@ SECTIONS
 
 	RO_DATA(PAGE_SIZE)
 	EXCEPTION_TABLE(8)
+	NOTES
 	_etext = .;			/* End of text and rodata section */
 
 	. = ALIGN(PAGE_SIZE);
@@ -96,33 +96,14 @@ SECTIONS
 	PERCPU_SECTION(64)
 
 	__init_end = .;
-	. = ALIGN(THREAD_SIZE);
-	__data_loc = .;
-
-	.data : AT(__data_loc) {
-		_data = .;		/* address in memory */
-		_sdata = .;
-
-		/*
-		 * first, the init task union, aligned
-		 * to an 8192 byte boundary.
-		 */
-		INIT_TASK_DATA(THREAD_SIZE)
-		NOSAVE_DATA
-		CACHELINE_ALIGNED_DATA(64)
-		READ_MOSTLY_DATA(64)
-
-		/*
-		 * and the usual data section
-		 */
-		DATA_DATA
-		CONSTRUCTORS
-
-		_edata = .;
-	}
-	_edata_loc = __data_loc + SIZEOF(.data);
 
-	NOTES
+	. = ALIGN(PAGE_SIZE);
+	_data = .;
+	__data_loc = _data - LOAD_OFFSET;
+	_sdata = .;
+	RW_DATA_SECTION(64, PAGE_SIZE, THREAD_SIZE)
+	_edata = .;
+	_edata_loc = __data_loc + SIZEOF(.data);
 
 	BSS_SECTION(0, 0, 0)
 	_end = .;
diff --git a/arch/arm64/kvm/hyp-init.S b/arch/arm64/kvm/hyp-init.S
index ba84e67..2b0244d 100644
--- a/arch/arm64/kvm/hyp-init.S
+++ b/arch/arm64/kvm/hyp-init.S
@@ -74,7 +74,10 @@ __do_hyp_init:
 	msr	mair_el2, x4
 	isb
 
-	mov	x4, #SCTLR_EL2_FLAGS
+	mrs	x4, sctlr_el2
+	and	x4, x4, #SCTLR_EL2_EE	// preserve endianness of EL2
+	ldr	x5, =SCTLR_EL2_FLAGS
+	orr	x4, x4, x5
 	msr	sctlr_el2, x4
 	isb
 
diff --git a/arch/arm64/kvm/hyp.S b/arch/arm64/kvm/hyp.S
index 1ac0bbb..3b47c36 100644
--- a/arch/arm64/kvm/hyp.S
+++ b/arch/arm64/kvm/hyp.S
@@ -403,6 +403,14 @@ __kvm_hyp_code_start:
 	ldr	w9, [x2, #GICH_ELRSR0]
 	ldr	w10, [x2, #GICH_ELRSR1]
 	ldr	w11, [x2, #GICH_APR]
+CPU_BE(	rev	w4,  w4  )
+CPU_BE(	rev	w5,  w5  )
+CPU_BE(	rev	w6,  w6  )
+CPU_BE(	rev	w7,  w7  )
+CPU_BE(	rev	w8,  w8  )
+CPU_BE(	rev	w9,  w9  )
+CPU_BE(	rev	w10, w10 )
+CPU_BE(	rev	w11, w11 )
 
 	str	w4, [x3, #VGIC_CPU_HCR]
 	str	w5, [x3, #VGIC_CPU_VMCR]
@@ -421,6 +429,7 @@ __kvm_hyp_code_start:
 	ldr	w4, [x3, #VGIC_CPU_NR_LR]
 	add	x3, x3, #VGIC_CPU_LR
 1:	ldr	w5, [x2], #4
+CPU_BE(	rev	w5, w5 )
 	str	w5, [x3], #4
 	sub	w4, w4, #1
 	cbnz	w4, 1b
@@ -446,6 +455,9 @@ __kvm_hyp_code_start:
 	ldr	w4, [x3, #VGIC_CPU_HCR]
 	ldr	w5, [x3, #VGIC_CPU_VMCR]
 	ldr	w6, [x3, #VGIC_CPU_APR]
+CPU_BE(	rev	w4, w4 )
+CPU_BE(	rev	w5, w5 )
+CPU_BE(	rev	w6, w6 )
 
 	str	w4, [x2, #GICH_HCR]
 	str	w5, [x2, #GICH_VMCR]
@@ -456,6 +468,7 @@ __kvm_hyp_code_start:
 	ldr	w4, [x3, #VGIC_CPU_NR_LR]
 	add	x3, x3, #VGIC_CPU_LR
 1:	ldr	w5, [x3], #4
+CPU_BE(	rev	w5, w5 )
 	str	w5, [x2], #4
 	sub	w4, w4, #1
 	cbnz	w4, 1b
diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index 6c8ba25..c23751b 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -130,7 +130,7 @@ static void __do_user_fault(struct task_struct *tsk, unsigned long addr,
 	force_sig_info(sig, &si, tsk);
 }
 
-void do_bad_area(unsigned long addr, unsigned int esr, struct pt_regs *regs)
+static void do_bad_area(unsigned long addr, unsigned int esr, struct pt_regs *regs)
 {
 	struct task_struct *tsk = current;
 	struct mm_struct *mm = tsk->active_mm;
@@ -199,13 +199,6 @@ static int __kprobes do_page_fault(unsigned long addr, unsigned int esr,
 	unsigned long vm_flags = VM_READ | VM_WRITE | VM_EXEC;
 	unsigned int mm_flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
 
-	if (esr & ESR_LNX_EXEC) {
-		vm_flags = VM_EXEC;
-	} else if ((esr & ESR_WRITE) && !(esr & ESR_CM)) {
-		vm_flags = VM_WRITE;
-		mm_flags |= FAULT_FLAG_WRITE;
-	}
-
 	tsk = current;
 	mm  = tsk->mm;
 
@@ -220,6 +213,16 @@ static int __kprobes do_page_fault(unsigned long addr, unsigned int esr,
 	if (in_atomic() || !mm)
 		goto no_context;
 
+	if (user_mode(regs))
+		mm_flags |= FAULT_FLAG_USER;
+
+	if (esr & ESR_LNX_EXEC) {
+		vm_flags = VM_EXEC;
+	} else if ((esr & ESR_WRITE) && !(esr & ESR_CM)) {
+		vm_flags = VM_WRITE;
+		mm_flags |= FAULT_FLAG_WRITE;
+	}
+
 	/*
 	 * As per x86, we may deadlock here. However, since the kernel only
 	 * validly references user space from well defined areas of the code,
@@ -288,6 +291,13 @@ retry:
 			      VM_FAULT_BADACCESS))))
 		return 0;
 
+	/*
+	 * If we are in kernel mode at this point, we have no context to
+	 * handle this fault with.
+	 */
+	if (!user_mode(regs))
+		goto no_context;
+
 	if (fault & VM_FAULT_OOM) {
 		/*
 		 * We ran out of memory, call the OOM killer, and return to
@@ -298,13 +308,6 @@ retry:
 		return 0;
 	}
 
-	/*
-	 * If we are in kernel mode at this point, we have no context to
-	 * handle this fault with.
-	 */
-	if (!user_mode(regs))
-		goto no_context;
-
 	if (fault & VM_FAULT_SIGBUS) {
 		/*
 		 * We had some memory, but were unable to successfully fix up
diff --git a/arch/arm64/mm/hugetlbpage.c b/arch/arm64/mm/hugetlbpage.c
index 2fc8258..5e9aec3 100644
--- a/arch/arm64/mm/hugetlbpage.c
+++ b/arch/arm64/mm/hugetlbpage.c
@@ -54,6 +54,11 @@ int pud_huge(pud_t pud)
 	return !(pud_val(pud) & PUD_TABLE_BIT);
 }
 
+int pmd_huge_support(void)
+{
+	return 1;
+}
+
 static __init int setup_hugepagesz(char *opt)
 {
 	unsigned long ps = memparse(opt, &opt);
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 67e8d7c..de2de5d 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -44,8 +44,7 @@ static unsigned long phys_initrd_size __initdata = 0;
 
 phys_addr_t memstart_addr __read_mostly = 0;
 
-void __init early_init_dt_setup_initrd_arch(unsigned long start,
-					    unsigned long end)
+void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
 {
 	phys_initrd_start = start;
 	phys_initrd_size = end - start;
diff --git a/arch/arm64/mm/ioremap.c b/arch/arm64/mm/ioremap.c
index 1725cd6..2bb1d58 100644
--- a/arch/arm64/mm/ioremap.c
+++ b/arch/arm64/mm/ioremap.c
@@ -77,8 +77,24 @@ EXPORT_SYMBOL(__ioremap);
 
 void __iounmap(volatile void __iomem *io_addr)
 {
-	void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr);
+	unsigned long addr = (unsigned long)io_addr & PAGE_MASK;
 
-	vunmap(addr);
+	/*
+	 * We could get an address outside vmalloc range in case
+	 * of ioremap_cache() reusing a RAM mapping.
+	 */
+	if (VMALLOC_START <= addr && addr < VMALLOC_END)
+		vunmap((void *)addr);
 }
 EXPORT_SYMBOL(__iounmap);
+
+void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size)
+{
+	/* For normal memory we already have a cacheable mapping. */
+	if (pfn_valid(__phys_to_pfn(phys_addr)))
+		return (void __iomem *)__phys_to_virt(phys_addr);
+
+	return __ioremap_caller(phys_addr, size, __pgprot(PROT_NORMAL),
+				__builtin_return_address(0));
+}
+EXPORT_SYMBOL(ioremap_cache);
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index a8d1059..f557ebb 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -296,6 +296,7 @@ void __iomem * __init early_io_map(phys_addr_t phys, unsigned long virt)
 static void __init map_mem(void)
 {
 	struct memblock_region *reg;
+	phys_addr_t limit;
 
 	/*
 	 * Temporarily limit the memblock range. We need to do this as
@@ -303,9 +304,11 @@ static void __init map_mem(void)
 	 * memory addressable from the initial direct kernel mapping.
 	 *
 	 * The initial direct kernel mapping, located at swapper_pg_dir,
-	 * gives us PGDIR_SIZE memory starting from PHYS_OFFSET (aligned).
+	 * gives us PGDIR_SIZE memory starting from PHYS_OFFSET (which must be
+	 * aligned to 2MB as per Documentation/arm64/booting.txt).
 	 */
-	memblock_set_current_limit((PHYS_OFFSET & PGDIR_MASK) + PGDIR_SIZE);
+	limit = PHYS_OFFSET + PGDIR_SIZE;
+	memblock_set_current_limit(limit);
 
 	/* map all the memory banks */
 	for_each_memblock(memory, reg) {
@@ -315,6 +318,22 @@ static void __init map_mem(void)
 		if (start >= end)
 			break;
 
+#ifndef CONFIG_ARM64_64K_PAGES
+		/*
+		 * For the first memory bank align the start address and
+		 * current memblock limit to prevent create_mapping() from
+		 * allocating pte page tables from unmapped memory.
+		 * When 64K pages are enabled, the pte page table for the
+		 * first PGDIR_SIZE is already present in swapper_pg_dir.
+		 */
+		if (start < limit)
+			start = ALIGN(start, PMD_SIZE);
+		if (end < limit) {
+			limit = end & PMD_MASK;
+			memblock_set_current_limit(limit);
+		}
+#endif
+
 		create_mapping(start, __phys_to_virt(start), end - start);
 	}
 
diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
index a82ae88..421b99f 100644
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -95,10 +95,6 @@ ENTRY(cpu_do_switch_mm)
 	ret
 ENDPROC(cpu_do_switch_mm)
 
-cpu_name:
-	.ascii	"AArch64 Processor"
-	.align
-
 	.section ".text.init", #alloc, #execinstr
 
 /*
@@ -151,7 +147,7 @@ ENTRY(__cpu_setup)
 	 * both user and kernel.
 	 */
 	ldr	x10, =TCR_TxSZ(VA_BITS) | TCR_FLAGS | TCR_IPS_40BIT | \
-		      TCR_ASID16 | (1 << 31)
+		      TCR_ASID16 | TCR_TBI0 | (1 << 31)
 #ifdef CONFIG_ARM64_64K_PAGES
 	orr	x10, x10, TCR_TG0_64K
 	orr	x10, x10, TCR_TG1_64K
@@ -166,9 +162,9 @@ ENDPROC(__cpu_setup)
 	 *       CE0      XWHW CZ     ME TEEA S
 	 * .... .IEE .... NEAI TE.I ..AD DEN0 ACAM
 	 * 0011 0... 1101 ..0. ..0. 10.. .... .... < hardware reserved
-	 * .... .100 .... 01.1 11.1 ..01 0001 1101 < software settings
+	 * .... .1.. .... 01.1 11.1 ..01 0001 1101 < software settings
 	 */
 	.type	crval, #object
 crval:
-	.word	0x030802e2			// clear
+	.word	0x000802e2			// clear
 	.word	0x0405d11d			// set
diff --git a/arch/arm64/mm/tlb.S b/arch/arm64/mm/tlb.S
index 8ae80a1..19da91e 100644
--- a/arch/arm64/mm/tlb.S
+++ b/arch/arm64/mm/tlb.S
@@ -35,7 +35,7 @@
  */
 ENTRY(__cpu_flush_user_tlb_range)
 	vma_vm_mm x3, x2			// get vma->vm_mm
-	mmid	x3, x3				// get vm_mm->context.id
+	mmid	w3, x3				// get vm_mm->context.id
 	dsb	sy
 	lsr	x0, x0, #12			// align address
 	lsr	x1, x1, #12
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 549903c..b6878eb 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -6,7 +6,6 @@ config AVR32
 	select HAVE_CLK
 	select HAVE_OPROFILE
 	select HAVE_KPROBES
-	select HAVE_GENERIC_HARDIRQS
 	select VIRT_TO_BUS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_ATOMIC64
diff --git a/arch/avr32/include/asm/Kbuild b/arch/avr32/include/asm/Kbuild
index d22af85..fd79807 100644
--- a/arch/avr32/include/asm/Kbuild
+++ b/arch/avr32/include/asm/Kbuild
@@ -1,5 +1,19 @@
 
 generic-y	+= clkdev.h
+generic-y       += cputime.h
+generic-y       += delay.h
+generic-y       += device.h
+generic-y       += div64.h
+generic-y       += emergency-restart.h
 generic-y	+= exec.h
-generic-y	+= trace_clock.h
+generic-y       += futex.h
+generic-y       += irq_regs.h
 generic-y	+= param.h
+generic-y       += local.h
+generic-y       += local64.h
+generic-y       += percpu.h
+generic-y       += scatterlist.h
+generic-y       += sections.h
+generic-y       += topology.h
+generic-y	+= trace_clock.h
+generic-y       += xor.h
diff --git a/arch/avr32/include/asm/cputime.h b/arch/avr32/include/asm/cputime.h
deleted file mode 100644
index e87e0f8..0000000
--- a/arch/avr32/include/asm/cputime.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_AVR32_CPUTIME_H
-#define __ASM_AVR32_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __ASM_AVR32_CPUTIME_H */
diff --git a/arch/avr32/include/asm/delay.h b/arch/avr32/include/asm/delay.h
deleted file mode 100644
index 9670e12..0000000
--- a/arch/avr32/include/asm/delay.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/delay.h>
diff --git a/arch/avr32/include/asm/device.h b/arch/avr32/include/asm/device.h
deleted file mode 100644
index d8f9872..0000000
--- a/arch/avr32/include/asm/device.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
diff --git a/arch/avr32/include/asm/div64.h b/arch/avr32/include/asm/div64.h
deleted file mode 100644
index d7ddd4f..0000000
--- a/arch/avr32/include/asm/div64.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_AVR32_DIV64_H
-#define __ASM_AVR32_DIV64_H
-
-#include <asm-generic/div64.h>
-
-#endif /* __ASM_AVR32_DIV64_H */
diff --git a/arch/avr32/include/asm/emergency-restart.h b/arch/avr32/include/asm/emergency-restart.h
deleted file mode 100644
index 3e7e014..0000000
--- a/arch/avr32/include/asm/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_AVR32_EMERGENCY_RESTART_H
-#define __ASM_AVR32_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* __ASM_AVR32_EMERGENCY_RESTART_H */
diff --git a/arch/avr32/include/asm/futex.h b/arch/avr32/include/asm/futex.h
deleted file mode 100644
index 10419f1..0000000
--- a/arch/avr32/include/asm/futex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_AVR32_FUTEX_H
-#define __ASM_AVR32_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif /* __ASM_AVR32_FUTEX_H */
diff --git a/arch/avr32/include/asm/irq_regs.h b/arch/avr32/include/asm/irq_regs.h
deleted file mode 100644
index 3dd9c0b..0000000
--- a/arch/avr32/include/asm/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/arch/avr32/include/asm/local.h b/arch/avr32/include/asm/local.h
deleted file mode 100644
index 1c16196..0000000
--- a/arch/avr32/include/asm/local.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_AVR32_LOCAL_H
-#define __ASM_AVR32_LOCAL_H
-
-#include <asm-generic/local.h>
-
-#endif /* __ASM_AVR32_LOCAL_H */
diff --git a/arch/avr32/include/asm/local64.h b/arch/avr32/include/asm/local64.h
deleted file mode 100644
index 36c93b5..0000000
--- a/arch/avr32/include/asm/local64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/local64.h>
diff --git a/arch/avr32/include/asm/percpu.h b/arch/avr32/include/asm/percpu.h
deleted file mode 100644
index 69227b4..0000000
--- a/arch/avr32/include/asm/percpu.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_AVR32_PERCPU_H
-#define __ASM_AVR32_PERCPU_H
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ASM_AVR32_PERCPU_H */
diff --git a/arch/avr32/include/asm/scatterlist.h b/arch/avr32/include/asm/scatterlist.h
deleted file mode 100644
index a5902d98..0000000
--- a/arch/avr32/include/asm/scatterlist.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_AVR32_SCATTERLIST_H
-#define __ASM_AVR32_SCATTERLIST_H
-
-#include <asm-generic/scatterlist.h>
-
-#endif /* __ASM_AVR32_SCATTERLIST_H */
diff --git a/arch/avr32/include/asm/sections.h b/arch/avr32/include/asm/sections.h
deleted file mode 100644
index aa14252..0000000
--- a/arch/avr32/include/asm/sections.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_AVR32_SECTIONS_H
-#define __ASM_AVR32_SECTIONS_H
-
-#include <asm-generic/sections.h>
-
-#endif /* __ASM_AVR32_SECTIONS_H */
diff --git a/arch/avr32/include/asm/topology.h b/arch/avr32/include/asm/topology.h
deleted file mode 100644
index 5b766cb..0000000
--- a/arch/avr32/include/asm/topology.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_AVR32_TOPOLOGY_H
-#define __ASM_AVR32_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif /* __ASM_AVR32_TOPOLOGY_H */
diff --git a/arch/avr32/include/asm/xor.h b/arch/avr32/include/asm/xor.h
deleted file mode 100644
index 99c87aa..0000000
--- a/arch/avr32/include/asm/xor.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_XOR_H
-#define _ASM_XOR_H
-
-#include <asm-generic/xor.h>
-
-#endif
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
index c273100..42a53e74 100644
--- a/arch/avr32/kernel/process.c
+++ b/arch/avr32/kernel/process.c
@@ -289,7 +289,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 		memset(childregs, 0, sizeof(struct pt_regs));
 		p->thread.cpu_context.r0 = arg;
 		p->thread.cpu_context.r1 = usp; /* fn */
-		p->thread.cpu_context.r2 = syscall_return;
+		p->thread.cpu_context.r2 = (unsigned long)syscall_return;
 		p->thread.cpu_context.pc = (unsigned long)ret_from_kernel_thread;
 		childregs->sr = MODE_SUPERVISOR;
 	} else {
diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
index 869a1c6..12f828a 100644
--- a/arch/avr32/kernel/time.c
+++ b/arch/avr32/kernel/time.c
@@ -98,7 +98,14 @@ static void comparator_mode(enum clock_event_mode mode,
 	case CLOCK_EVT_MODE_SHUTDOWN:
 		sysreg_write(COMPARE, 0);
 		pr_debug("%s: stop\n", evdev->name);
-		cpu_idle_poll_ctrl(false);
+		if (evdev->mode == CLOCK_EVT_MODE_ONESHOT ||
+		    evdev->mode == CLOCK_EVT_MODE_RESUME) {
+			/*
+			 * Only disable idle poll if we have forced that
+			 * in a previous call.
+			 */
+			cpu_idle_poll_ctrl(false);
+		}
 		break;
 	default:
 		BUG();
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 7f8759a..a68f3cf 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1983,6 +1983,9 @@ at32_add_device_nand(unsigned int id, struct atmel_nand_data *data)
 				ARRAY_SIZE(smc_cs3_resource)))
 		goto fail;
 
+	/* For at32ap7000, we use the reset workaround for nand driver */
+	data->need_reset_workaround = true;
+
 	if (platform_device_add_data(pdev, data,
 				sizeof(struct atmel_nand_data)))
 		goto fail;
diff --git a/arch/avr32/mm/fault.c b/arch/avr32/mm/fault.c
index b2f2d2d..0eca933 100644
--- a/arch/avr32/mm/fault.c
+++ b/arch/avr32/mm/fault.c
@@ -86,6 +86,8 @@ asmlinkage void do_page_fault(unsigned long ecr, struct pt_regs *regs)
 
 	local_irq_enable();
 
+	if (user_mode(regs))
+		flags |= FAULT_FLAG_USER;
 retry:
 	down_read(&mm->mmap_sem);
 
@@ -228,9 +230,9 @@ no_context:
 	 */
 out_of_memory:
 	up_read(&mm->mmap_sem);
-	pagefault_out_of_memory();
 	if (!user_mode(regs))
 		goto no_context;
+	pagefault_out_of_memory();
 	return;
 
 do_sigbus:
diff --git a/arch/avr32/oprofile/op_model_avr32.c b/arch/avr32/oprofile/op_model_avr32.c
index f74b780..08308be 100644
--- a/arch/avr32/oprofile/op_model_avr32.c
+++ b/arch/avr32/oprofile/op_model_avr32.c
@@ -97,8 +97,7 @@ static irqreturn_t avr32_perf_counter_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int avr32_perf_counter_create_files(struct super_block *sb,
-		struct dentry *root)
+static int avr32_perf_counter_create_files(struct dentry *root)
 {
 	struct dentry *dir;
 	unsigned int i;
@@ -106,21 +105,21 @@ static int avr32_perf_counter_create_files(struct super_block *sb,
 
 	for (i = 0; i < NR_counter; i++) {
 		snprintf(filename, sizeof(filename), "%u", i);
-		dir = oprofilefs_mkdir(sb, root, filename);
+		dir = oprofilefs_mkdir(root, filename);
 
-		oprofilefs_create_ulong(sb, dir, "enabled",
+		oprofilefs_create_ulong(dir, "enabled",
 				&counter[i].enabled);
-		oprofilefs_create_ulong(sb, dir, "event",
+		oprofilefs_create_ulong(dir, "event",
 				&counter[i].event);
-		oprofilefs_create_ulong(sb, dir, "count",
+		oprofilefs_create_ulong(dir, "count",
 				&counter[i].count);
 
 		/* Dummy entries */
-		oprofilefs_create_ulong(sb, dir, "kernel",
+		oprofilefs_create_ulong(dir, "kernel",
 				&counter[i].kernel);
-		oprofilefs_create_ulong(sb, dir, "user",
+		oprofilefs_create_ulong(dir, "user",
 				&counter[i].user);
-		oprofilefs_create_ulong(sb, dir, "unit_mask",
+		oprofilefs_create_ulong(dir, "unit_mask",
 				&counter[i].unit_mask);
 	}
 
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 3b6abc5..f78c9a2 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -32,7 +32,6 @@ config BLACKFIN
 	select HAVE_UNDERSCORE_SYMBOL_PREFIX
 	select VIRT_TO_BUS
 	select ARCH_WANT_IPC_PARSE_VERSION
-	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_ATOMIC64
 	select GENERIC_IRQ_PROBE
 	select USE_GENERIC_SMP_HELPERS if SMP
diff --git a/arch/blackfin/boot/.gitignore b/arch/blackfin/boot/.gitignore
index 229e508..1287a54 100644
--- a/arch/blackfin/boot/.gitignore
+++ b/arch/blackfin/boot/.gitignore
@@ -1,2 +1,3 @@
 vmImage*
 vmlinux*
+uImage*
diff --git a/arch/blackfin/include/asm/scb.h b/arch/blackfin/include/asm/scb.h
new file mode 100644
index 0000000..a294cc0
--- /dev/null
+++ b/arch/blackfin/include/asm/scb.h
@@ -0,0 +1,21 @@
+/*
+ * arch/blackfin/mach-common/scb-init.c - reprogram system cross bar priority
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#define SCB_SLOT_OFFSET	24
+#define SCB_MI_MAX_SLOT 32
+
+struct scb_mi_prio {
+	unsigned long scb_mi_arbr;
+	unsigned long scb_mi_arbw;
+	unsigned char scb_mi_slots;
+	unsigned char scb_mi_prio[SCB_MI_MAX_SLOT];
+};
+
+extern struct scb_mi_prio scb_data[];
+
+extern void init_scb(void);
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 19ad063..3961930 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -35,6 +35,9 @@
 #ifdef CONFIG_BF60x
 #include <mach/pm.h>
 #endif
+#ifdef CONFIG_SCB_PRIORITY
+#include <asm/scb.h>
+#endif
 
 u16 _bfin_swrst;
 EXPORT_SYMBOL(_bfin_swrst);
@@ -1101,6 +1104,9 @@ void __init setup_arch(char **cmdline_p)
 #endif
 	init_exception_vectors();
 	bfin_cache_init();	/* Initialize caches for the boot CPU */
+#ifdef CONFIG_SCB_PRIORITY
+	init_scb();
+#endif
 }
 
 static int __init topology_init(void)
diff --git a/arch/blackfin/mach-bf609/Kconfig b/arch/blackfin/mach-bf609/Kconfig
index 95a4f1b..2bcbf94 100644
--- a/arch/blackfin/mach-bf609/Kconfig
+++ b/arch/blackfin/mach-bf609/Kconfig
@@ -59,6 +59,1661 @@ config SEC_IRQ_PRIORITY_LEVELS
 	  Divide the total number of interrupt priority levels into sub-levels.
 	  There is 2 ^ (SEC_IRQ_PRIORITY_LEVELS + 1) different levels.
 
+
+comment "System Cross Bar Priority Assignment"
+
+config SCB_PRIORITY
+	bool "Init System Cross Bar Priority"
+	default n
+
+menuconfig	SCB0_MI0
+	bool "SCB0 Master Interface 0 (DDR)"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	Core 0	-- 0
+	Core 1	-- 2
+	SCB1	-- 9
+	SCB2	-- 10
+	SCB3	-- 11
+	SCB4	-- 12
+	SCB5	-- 5
+	SCB6	-- 6
+	SCB7	-- 8
+	SCB8	-- 7
+	SCB9	-- 4
+	USB	-- 13
+
+if SCB0_MI0
+
+config SCB0_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 13
+
+config SCB0_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 2
+	range 0 13
+
+config SCB0_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI0_SLOT4
+	int "Slot 4 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI0_SLOT5
+	int "Slot 5 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI0_SLOT6
+	int "Slot 6 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI0_SLOT7
+	int "Slot 7 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI0_SLOT8
+	int "Slot 8 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI0_SLOT9
+	int "Slot 9 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI0_SLOT10
+	int "Slot 10 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI0_SLOT11
+	int "Slot 11 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI0_SLOT12
+	int "Slot 12 slave interface id"
+	default 0
+	range 0 13
+
+config SCB0_MI0_SLOT13
+	int "Slot 13 slave interface id"
+	default 2
+	range 0 13
+
+config SCB0_MI0_SLOT14
+	int "Slot 14 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI0_SLOT15
+	int "Slot 15 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI0_SLOT16
+	int "Slot 16 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI0_SLOT17
+	int "Slot 17 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI0_SLOT18
+	int "Slot 18 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI0_SLOT19
+	int "Slot 19 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI0_SLOT20
+	int "Slot 20 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI0_SLOT21
+	int "Slot 21 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI0_SLOT22
+	int "Slot 22 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI0_SLOT23
+	int "Slot 23 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI0_SLOT24
+	int "Slot 24 slave interface id"
+	default 0
+	range 0 13
+
+config SCB0_MI0_SLOT25
+	int "Slot 25 slave interface id"
+	default 2
+	range 0 13
+
+config SCB0_MI0_SLOT26
+	int "Slot 26 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI0_SLOT27
+	int "Slot 27 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI0_SLOT28
+	int "Slot 28 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI0_SLOT29
+	int "Slot 29 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI0_SLOT30
+	int "Slot 30 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI0_SLOT31
+	int "Slot 31 slave interface id"
+	default 13
+	range 0 13
+
+endif # SCB0_MI0
+
+menuconfig	SCB0_MI1
+	bool "SCB0 Master Interface 1 (SMC)"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	Core 0	-- 0
+	Core 1	-- 2
+	SCB1	-- 9
+	SCB2	-- 10
+	SCB3	-- 11
+	SCB4	-- 12
+	SCB5	-- 5
+	SCB6	-- 6
+	SCB7	-- 8
+	SCB8	-- 7
+	SCB9	-- 4
+	USB	-- 13
+
+if SCB0_MI1
+
+config SCB0_MI1_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 13
+
+config SCB0_MI1_SLOT1
+	int "Slot 1 slave interface id"
+	default 2
+	range 0 13
+
+config SCB0_MI1_SLOT2
+	int "Slot 2 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI1_SLOT3
+	int "Slot 3 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI1_SLOT4
+	int "Slot 4 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI1_SLOT5
+	int "Slot 5 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI1_SLOT6
+	int "Slot 6 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI1_SLOT7
+	int "Slot 7 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI1_SLOT8
+	int "Slot 8 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI1_SLOT9
+	int "Slot 9 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI1_SLOT10
+	int "Slot 10 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI1_SLOT11
+	int "Slot 11 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI1_SLOT12
+	int "Slot 12 slave interface id"
+	default 0
+	range 0 13
+
+config SCB0_MI1_SLOT13
+	int "Slot 13 slave interface id"
+	default 2
+	range 0 13
+
+config SCB0_MI1_SLOT14
+	int "Slot 14 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI1_SLOT15
+	int "Slot 15 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI1_SLOT16
+	int "Slot 16 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI1_SLOT17
+	int "Slot 17 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI1_SLOT18
+	int "Slot 18 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI1_SLOT19
+	int "Slot 19 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI1_SLOT20
+	int "Slot 20 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI1_SLOT21
+	int "Slot 21 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI1_SLOT22
+	int "Slot 22 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI1_SLOT23
+	int "Slot 23 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI1_SLOT24
+	int "Slot 24 slave interface id"
+	default 0
+	range 0 13
+
+config SCB0_MI1_SLOT25
+	int "Slot 25 slave interface id"
+	default 2
+	range 0 13
+
+config SCB0_MI1_SLOT26
+	int "Slot 26 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI1_SLOT27
+	int "Slot 27 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI1_SLOT28
+	int "Slot 28 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI1_SLOT29
+	int "Slot 29 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI1_SLOT30
+	int "Slot 30 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI1_SLOT31
+	int "Slot 31 slave interface id"
+	default 13
+	range 0 13
+
+endif # SCB0_MI1
+
+menuconfig	SCB0_MI2
+	bool "SCB0 Master Interface 2 (Data L2)"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	Core 0	-- 0
+	Core 1	-- 2
+	SCB1	-- 9
+	SCB2	-- 10
+	SCB3	-- 11
+	SCB4	-- 12
+	SCB5	-- 5
+	SCB6	-- 6
+	SCB7	-- 8
+	SCB8	-- 7
+	SCB9	-- 4
+	USB	-- 13
+
+if SCB0_MI2
+
+config SCB0_MI2_SLOT0
+	int "Slot 0 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI2_SLOT1
+	int "Slot 1 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI2_SLOT2
+	int "Slot 2 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI2_SLOT3
+	int "Slot 3 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI2_SLOT4
+	int "Slot 4 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI2_SLOT5
+	int "Slot 5 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI2_SLOT6
+	int "Slot 6 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI2_SLOT7
+	int "Slot 7 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI2_SLOT8
+	int "Slot 8 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI2_SLOT9
+	int "Slot 9 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI2_SLOT10
+	int "Slot 10 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI2_SLOT11
+	int "Slot 11 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI2_SLOT12
+	int "Slot 12 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI2_SLOT13
+	int "Slot 13 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI2_SLOT14
+	int "Slot 14 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI2_SLOT15
+	int "Slot 15 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI2_SLOT16
+	int "Slot 16 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI2_SLOT17
+	int "Slot 17 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI2_SLOT18
+	int "Slot 18 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI2_SLOT19
+	int "Slot 19 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI2_SLOT20
+	int "Slot 20 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI2_SLOT21
+	int "Slot 21 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI2_SLOT22
+	int "Slot 22 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI2_SLOT23
+	int "Slot 23 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI2_SLOT24
+	int "Slot 24 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI2_SLOT25
+	int "Slot 25 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI2_SLOT26
+	int "Slot 26 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI2_SLOT27
+	int "Slot 27 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI2_SLOT28
+	int "Slot 28 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI2_SLOT29
+	int "Slot 29 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI2_SLOT30
+	int "Slot 30 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI2_SLOT31
+	int "Slot 31 slave interface id"
+	default 7
+	range 0 13
+
+endif # SCB0_MI2
+
+menuconfig	SCB0_MI3
+	bool "SCB0 Master Interface 3 (L1A)"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	Core 0	-- 0
+	Core 1	-- 2
+	SCB1	-- 9
+	SCB2	-- 10
+	SCB3	-- 11
+	SCB4	-- 12
+	SCB5	-- 5
+	SCB6	-- 6
+	SCB7	-- 8
+	SCB8	-- 7
+	SCB9	-- 4
+	USB	-- 13
+
+if SCB0_MI3
+
+config SCB0_MI3_SLOT0
+	int "Slot 0 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI3_SLOT1
+	int "Slot 1 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI3_SLOT2
+	int "Slot 2 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI3_SLOT3
+	int "Slot 3 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI3_SLOT4
+	int "Slot 4 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI3_SLOT5
+	int "Slot 5 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI3_SLOT6
+	int "Slot 6 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI3_SLOT7
+	int "Slot 7 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI3_SLOT8
+	int "Slot 8 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI3_SLOT9
+	int "Slot 9 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI3_SLOT10
+	int "Slot 10 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI3_SLOT11
+	int "Slot 11 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI3_SLOT12
+	int "Slot 12 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI3_SLOT13
+	int "Slot 13 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI3_SLOT14
+	int "Slot 14 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI3_SLOT15
+	int "Slot 15 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI3_SLOT16
+	int "Slot 16 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI3_SLOT17
+	int "Slot 17 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI3_SLOT18
+	int "Slot 18 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI3_SLOT19
+	int "Slot 19 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI3_SLOT20
+	int "Slot 20 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI3_SLOT21
+	int "Slot 21 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI3_SLOT22
+	int "Slot 22 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI3_SLOT23
+	int "Slot 23 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI3_SLOT24
+	int "Slot 24 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI3_SLOT25
+	int "Slot 25 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI3_SLOT26
+	int "Slot 26 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI3_SLOT27
+	int "Slot 27 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI3_SLOT28
+	int "Slot 28 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI3_SLOT29
+	int "Slot 29 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI3_SLOT30
+	int "Slot 30 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI3_SLOT31
+	int "Slot 31 slave interface id"
+	default 7
+	range 0 13
+
+endif # SCB0_MI3
+
+menuconfig	SCB0_MI4
+	bool "SCB0 Master Interface 4 (L1B)"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	Core 0	-- 0
+	Core 1	-- 2
+	SCB1	-- 9
+	SCB2	-- 10
+	SCB3	-- 11
+	SCB4	-- 12
+	SCB5	-- 5
+	SCB6	-- 6
+	SCB7	-- 8
+	SCB8	-- 7
+	SCB9	-- 4
+	USB	-- 13
+
+if SCB0_MI4
+
+config SCB0_MI4_SLOT0
+	int "Slot 0 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI4_SLOT1
+	int "Slot 1 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI4_SLOT2
+	int "Slot 2 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI4_SLOT3
+	int "Slot 3 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI4_SLOT4
+	int "Slot 4 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI4_SLOT5
+	int "Slot 5 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI4_SLOT6
+	int "Slot 6 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI4_SLOT7
+	int "Slot 7 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI4_SLOT8
+	int "Slot 8 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI4_SLOT9
+	int "Slot 9 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI4_SLOT10
+	int "Slot 10 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI4_SLOT11
+	int "Slot 11 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI4_SLOT12
+	int "Slot 12 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI4_SLOT13
+	int "Slot 13 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI4_SLOT14
+	int "Slot 14 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI4_SLOT15
+	int "Slot 15 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI4_SLOT16
+	int "Slot 16 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI4_SLOT17
+	int "Slot 17 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI4_SLOT18
+	int "Slot 18 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI4_SLOT19
+	int "Slot 19 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI4_SLOT20
+	int "Slot 20 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI4_SLOT21
+	int "Slot 21 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI4_SLOT22
+	int "Slot 22 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI4_SLOT23
+	int "Slot 23 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI4_SLOT24
+	int "Slot 24 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI4_SLOT25
+	int "Slot 25 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI4_SLOT26
+	int "Slot 26 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI4_SLOT27
+	int "Slot 27 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI4_SLOT28
+	int "Slot 28 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI4_SLOT29
+	int "Slot 29 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI4_SLOT30
+	int "Slot 30 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI4_SLOT31
+	int "Slot 31 slave interface id"
+	default 7
+	range 0 13
+
+endif # SCB0_MI4
+
+menuconfig	SCB0_MI5
+	bool "SCB0 Master Interface 5 (SMMR)"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	MMR0	-- 1
+	MMR1	-- 3
+	SCB2	-- 10
+	SCB4	-- 12
+
+if SCB0_MI5
+
+config SCB0_MI5_SLOT0
+	int "Slot 0 slave interface id"
+	default 1
+	range 0 13
+
+config SCB0_MI5_SLOT1
+	int "Slot 1 slave interface id"
+	default 3
+	range 0 13
+
+config SCB0_MI5_SLOT2
+	int "Slot 2 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI5_SLOT3
+	int "Slot 3 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI5_SLOT4
+	int "Slot 4 slave interface id"
+	default 1
+	range 0 13
+
+config SCB0_MI5_SLOT5
+	int "Slot 5 slave interface id"
+	default 3
+	range 0 13
+
+config SCB0_MI5_SLOT6
+	int "Slot 6 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI5_SLOT7
+	int "Slot 7 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI5_SLOT8
+	int "Slot 8 slave interface id"
+	default 1
+	range 0 13
+
+config SCB0_MI5_SLOT9
+	int "Slot 9 slave interface id"
+	default 3
+	range 0 13
+
+config SCB0_MI5_SLOT10
+	int "Slot 10 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI5_SLOT11
+	int "Slot 11 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI5_SLOT12
+	int "Slot 12 slave interface id"
+	default 1
+	range 0 13
+
+config SCB0_MI5_SLOT13
+	int "Slot 13 slave interface id"
+	default 3
+	range 0 13
+
+config SCB0_MI5_SLOT14
+	int "Slot 14 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI5_SLOT15
+	int "Slot 15 slave interface id"
+	default 12
+	range 0 13
+
+endif # SCB0_MI5
+
+menuconfig	SCB1_MI0
+	bool "SCB1 Master Interface 0"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	SPORT0A	-- 0
+	SPORT0B	-- 1
+	SPORT1A	-- 2
+	SPORT1B	-- 3
+	SPORT2A	-- 4
+	SPORT2B	-- 5
+	SPI0TX	-- 6
+	SPI0RX	-- 7
+	SPI1TX	-- 8
+	SPI1RX	-- 9
+
+if SCB1_MI0
+
+config SCB1_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 9
+
+config SCB1_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 1
+	range 0 9
+
+config SCB1_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 2
+	range 0 9
+
+config SCB1_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 3
+	range 0 9
+
+config SCB1_MI0_SLOT4
+	int "Slot 4 slave interface id"
+	default 4
+	range 0 9
+
+config SCB1_MI0_SLOT5
+	int "Slot 5 slave interface id"
+	default 5
+	range 0 9
+
+config SCB1_MI0_SLOT6
+	int "Slot 6 slave interface id"
+	default 6
+	range 0 9
+
+config SCB1_MI0_SLOT7
+	int "Slot 7 slave interface id"
+	default 7
+	range 0 9
+
+config SCB1_MI0_SLOT8
+	int "Slot 8 slave interface id"
+	default 8
+	range 0 9
+
+config SCB1_MI0_SLOT9
+	int "Slot 9 slave interface id"
+	default 9
+	range 0 9
+
+config SCB1_MI0_SLOT10
+	int "Slot 10 slave interface id"
+	default 0
+	range 0 9
+
+config SCB1_MI0_SLOT11
+	int "Slot 11 slave interface id"
+	default 1
+	range 0 9
+
+config SCB1_MI0_SLOT12
+	int "Slot 12 slave interface id"
+	default 2
+	range 0 9
+
+config SCB1_MI0_SLOT13
+	int "Slot 13 slave interface id"
+	default 3
+	range 0 9
+
+config SCB1_MI0_SLOT14
+	int "Slot 14 slave interface id"
+	default 4
+	range 0 9
+
+config SCB1_MI0_SLOT15
+	int "Slot 15 slave interface id"
+	default 5
+	range 0 9
+
+config SCB1_MI0_SLOT16
+	int "Slot 16 slave interface id"
+	default 6
+	range 0 13
+
+config SCB1_MI0_SLOT17
+	int "Slot 17 slave interface id"
+	default 7
+	range 0 13
+
+config SCB1_MI0_SLOT18
+	int "Slot 18 slave interface id"
+	default 8
+	range 0 13
+
+config SCB1_MI0_SLOT19
+	int "Slot 19 slave interface id"
+	default 9
+	range 0 13
+
+endif # SCB1_MI0
+
+menuconfig	SCB2_MI0
+	bool "SCB2 Master Interface 0"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	RSI	-- 0
+	SDU DMA	-- 1
+	SDU	-- 2
+	EMAC0	-- 3
+	EMAC1	-- 4
+
+if SCB2_MI0
+
+config SCB2_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 4
+
+config SCB2_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 1
+	range 0 4
+
+config SCB2_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 2
+	range 0 4
+
+config SCB2_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 3
+	range 0 4
+
+config SCB2_MI0_SLOT4
+	int "Slot 4 slave interface id"
+	default 4
+	range 0 4
+
+config SCB2_MI0_SLOT5
+	int "Slot 5 slave interface id"
+	default 0
+	range 0 4
+
+config SCB2_MI0_SLOT6
+	int "Slot 6 slave interface id"
+	default 1
+	range 0 4
+
+config SCB2_MI0_SLOT7
+	int "Slot 7 slave interface id"
+	default 2
+	range 0 4
+
+config SCB2_MI0_SLOT8
+	int "Slot 8 slave interface id"
+	default 3
+	range 0 4
+
+config SCB2_MI0_SLOT9
+	int "Slot 9 slave interface id"
+	default 4
+	range 0 4
+
+endif # SCB2_MI0
+
+menuconfig	SCB3_MI0
+	bool "SCB3 Master Interface 0"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	LP0	-- 0
+	LP1	-- 1
+	LP2	-- 2
+	LP3	-- 3
+	UART0TX	-- 4
+	UART0RX	-- 5
+	UART1TX	-- 4
+	UART1RX	-- 5
+
+if SCB3_MI0
+
+config SCB3_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 7
+
+config SCB3_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 1
+	range 0 7
+
+config SCB3_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 2
+	range 0 7
+
+config SCB3_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 3
+	range 0 7
+
+config SCB3_MI0_SLOT4
+	int "Slot 4 slave interface id"
+	default 4
+	range 0 7
+
+config SCB3_MI0_SLOT5
+	int "Slot 5 slave interface id"
+	default 5
+	range 0 7
+
+config SCB3_MI0_SLOT6
+	int "Slot 6 slave interface id"
+	default 6
+	range 0 7
+
+config SCB3_MI0_SLOT7
+	int "Slot 7 slave interface id"
+	default 7
+	range 0 7
+
+config SCB3_MI0_SLOT8
+	int "Slot 8 slave interface id"
+	default 0
+	range 0 7
+
+config SCB3_MI0_SLOT9
+	int "Slot 9 slave interface id"
+	default 1
+	range 0 7
+
+config SCB3_MI0_SLOT10
+	int "Slot 10 slave interface id"
+	default 2
+	range 0 7
+
+config SCB3_MI0_SLOT11
+	int "Slot 11 slave interface id"
+	default 3
+	range 0 7
+
+config SCB3_MI0_SLOT12
+	int "Slot 12 slave interface id"
+	default 4
+	range 0 7
+
+config SCB3_MI0_SLOT13
+	int "Slot 13 slave interface id"
+	default 5
+	range 0 7
+
+config SCB3_MI0_SLOT14
+	int "Slot 14 slave interface id"
+	default 6
+	range 0 7
+
+config SCB3_MI0_SLOT15
+	int "Slot 15 slave interface id"
+	default 7
+	range 0 7
+
+endif # SCB3_MI0
+
+menuconfig	SCB4_MI0
+	bool "SCB4 Master Interface 0"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	MDA21	-- 0
+	MDA22	-- 1
+	MDA23	-- 2
+	MDA24	-- 3
+	MDA25	-- 4
+	MDA26	-- 5
+	MDA27	-- 6
+	MDA28	-- 7
+
+if SCB4_MI0
+
+config SCB4_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 7
+
+config SCB4_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 1
+	range 0 7
+
+config SCB4_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 2
+	range 0 7
+
+config SCB4_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 3
+	range 0 7
+
+config SCB4_MI0_SLOT4
+	int "Slot 4 slave interface id"
+	default 4
+	range 0 7
+
+config SCB4_MI0_SLOT5
+	int "Slot 5 slave interface id"
+	default 5
+	range 0 7
+
+config SCB4_MI0_SLOT6
+	int "Slot 6 slave interface id"
+	default 6
+	range 0 7
+
+config SCB4_MI0_SLOT7
+	int "Slot 7 slave interface id"
+	default 7
+	range 0 7
+
+config SCB4_MI0_SLOT8
+	int "Slot 8 slave interface id"
+	default 0
+	range 0 7
+
+config SCB4_MI0_SLOT9
+	int "Slot 9 slave interface id"
+	default 1
+	range 0 7
+
+config SCB4_MI0_SLOT10
+	int "Slot 10 slave interface id"
+	default 2
+	range 0 7
+
+config SCB4_MI0_SLOT11
+	int "Slot 11 slave interface id"
+	default 3
+	range 0 7
+
+config SCB4_MI0_SLOT12
+	int "Slot 12 slave interface id"
+	default 4
+	range 0 7
+
+config SCB4_MI0_SLOT13
+	int "Slot 13 slave interface id"
+	default 5
+	range 0 7
+
+config SCB4_MI0_SLOT14
+	int "Slot 14 slave interface id"
+	default 6
+	range 0 7
+
+config SCB4_MI0_SLOT15
+	int "Slot 15 slave interface id"
+	default 7
+	range 0 7
+
+endif # SCB4_MI0
+
+menuconfig	SCB5_MI0
+	bool "SCB5 Master Interface 0"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	PPI0 MDA29	-- 0
+	PPI0 MDA30	-- 1
+	PPI2 MDA31	-- 2
+	PPI2 MDA32	-- 3
+
+if SCB5_MI0
+
+config SCB5_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 3
+
+config SCB5_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 1
+	range 0 3
+
+config SCB5_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 2
+	range 0 3
+
+config SCB5_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 3
+	range 0 3
+
+config SCB5_MI0_SLOT4
+	int "Slot 4 slave interface id"
+	default 0
+	range 0 3
+
+config SCB5_MI0_SLOT5
+	int "Slot 5 slave interface id"
+	default 1
+	range 0 3
+
+config SCB5_MI0_SLOT6
+	int "Slot 6 slave interface id"
+	default 2
+	range 0 3
+
+config SCB5_MI0_SLOT7
+	int "Slot 7 slave interface id"
+	default 3
+	range 0 3
+
+endif # SCB5_MI0
+
+menuconfig	SCB6_MI0
+	bool "SCB6 Master Interface 0"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	PPI1 MDA33	-- 0
+	PPI1 MDA34	-- 1
+
+if SCB6_MI0
+
+config SCB6_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 1
+
+config SCB6_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 1
+	range 0 1
+
+config SCB6_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 0
+	range 0 1
+
+config SCB6_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 1
+	range 0 1
+
+endif # SCB6_MI0
+
+menuconfig	SCB7_MI0
+	bool "SCB7 Master Interface 0"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	PIXC0	-- 0
+	PIXC1	-- 1
+	PIXC2	-- 2
+
+if SCB7_MI0
+
+config SCB7_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 2
+
+config SCB7_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 1
+	range 0 2
+
+config SCB7_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 2
+	range 0 2
+
+config SCB7_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 0
+	range 0 2
+
+config SCB7_MI0_SLOT4
+	int "Slot 4 slave interface id"
+	default 1
+	range 0 2
+
+config SCB7_MI0_SLOT5
+	int "Slot 5 slave interface id"
+	default 2
+	range 0 2
+
+endif # SCB7_MI0
+
+menuconfig	SCB8_MI0
+	bool "SCB8 Master Interface 0"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	PVP CPDOB	-- 0
+	PVP CPDOC	-- 1
+	PVP CPCO	-- 2
+	PVP CPCI	-- 3
+
+if SCB8_MI0
+
+config SCB8_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 3
+
+config SCB8_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 1
+	range 0 3
+
+config SCB8_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 2
+	range 0 3
+
+config SCB8_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 3
+	range 0 3
+
+config SCB8_MI0_SLOT4
+	int "Slot 4 slave interface id"
+	default 0
+	range 0 3
+
+config SCB8_MI0_SLOT5
+	int "Slot 5 slave interface id"
+	default 1
+	range 0 3
+
+config SCB8_MI0_SLOT6
+	int "Slot 6 slave interface id"
+	default 2
+	range 0 3
+
+config SCB8_MI0_SLOT7
+	int "Slot 7 slave interface id"
+	default 3
+	range 0 3
+
+endif # SCB8_MI0
+
+menuconfig	SCB9_MI0
+	bool "SCB9 Master Interface 0"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	PVP MPDO	-- 0
+	PVP MPDI	-- 1
+	PVP MPCO	-- 2
+	PVP MPCI	-- 3
+	PVP CPDOA	-- 4
+
+if SCB9_MI0
+
+config SCB9_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 4
+
+config SCB9_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 1
+	range 0 4
+
+config SCB9_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 2
+	range 0 4
+
+config SCB9_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 3
+	range 0 4
+
+config SCB9_MI0_SLOT4
+	int "Slot 4 slave interface id"
+	default 4
+	range 0 4
+
+config SCB9_MI0_SLOT5
+	int "Slot 5 slave interface id"
+	default 0
+	range 0 4
+
+config SCB9_MI0_SLOT6
+	int "Slot 6 slave interface id"
+	default 1
+	range 0 4
+
+config SCB9_MI0_SLOT7
+	int "Slot 7 slave interface id"
+	default 2
+	range 0 4
+
+config SCB9_MI0_SLOT8
+	int "Slot 8 slave interface id"
+	default 3
+	range 0 4
+
+config SCB9_MI0_SLOT9
+	int "Slot 9 slave interface id"
+	default 4
+	range 0 4
+
+endif # SCB9_MI0
+
 endmenu
 
 endif
diff --git a/arch/blackfin/mach-bf609/Makefile b/arch/blackfin/mach-bf609/Makefile
index 234fe1b..60ffaf8 100644
--- a/arch/blackfin/mach-bf609/Makefile
+++ b/arch/blackfin/mach-bf609/Makefile
@@ -4,3 +4,4 @@
 
 obj-y := dma.o clock.o ints-priority.o
 obj-$(CONFIG_PM) += pm.o dpm.o
+obj-$(CONFIG_SCB_PRIORITY) += scb.o
diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c
index 0bc4723..d56a55a 100644
--- a/arch/blackfin/mach-bf609/boards/ezkit.c
+++ b/arch/blackfin/mach-bf609/boards/ezkit.c
@@ -104,6 +104,7 @@ static struct platform_device bfin_rotary_device = {
 
 #if defined(CONFIG_STMMAC_ETH) || defined(CONFIG_STMMAC_ETH_MODULE)
 #include <linux/stmmac.h>
+#include <linux/phy.h>
 
 static unsigned short pins[] = P_RMII0;
 
@@ -111,11 +112,26 @@ static struct stmmac_mdio_bus_data phy_private_data = {
 	.phy_mask = 1,
 };
 
+static struct stmmac_dma_cfg eth_dma_cfg = {
+	.pbl	= 2,
+};
+
+int stmmac_ptp_clk_init(struct platform_device *pdev)
+{
+	bfin_write32(PADS0_EMAC_PTP_CLKSEL, 0);
+	return 0;
+}
+
 static struct plat_stmmacenet_data eth_private_data = {
+	.has_gmac = 1,
 	.bus_id   = 0,
 	.enh_desc = 1,
 	.phy_addr = 1,
 	.mdio_bus_data = &phy_private_data,
+	.dma_cfg  = &eth_dma_cfg,
+	.force_thresh_dma_mode = 1,
+	.interface = PHY_INTERFACE_MODE_RMII,
+	.init = stmmac_ptp_clk_init,
 };
 
 static struct platform_device bfin_eth_device = {
@@ -1107,6 +1123,81 @@ static struct bfin_display_config bfin_display_data = {
 };
 #endif
 
+#if IS_ENABLED(CONFIG_VIDEO_ADV7343)
+#include <media/adv7343.h>
+
+static struct v4l2_output adv7343_outputs[] = {
+	{
+		.index = 0,
+		.name = "Composite",
+		.type = V4L2_OUTPUT_TYPE_ANALOG,
+		.std = V4L2_STD_ALL,
+		.capabilities = V4L2_OUT_CAP_STD,
+	},
+	{
+		.index = 1,
+		.name = "S-Video",
+		.type = V4L2_OUTPUT_TYPE_ANALOG,
+		.std = V4L2_STD_ALL,
+		.capabilities = V4L2_OUT_CAP_STD,
+	},
+	{
+		.index = 2,
+		.name = "Component",
+		.type = V4L2_OUTPUT_TYPE_ANALOG,
+		.std = V4L2_STD_ALL,
+		.capabilities = V4L2_OUT_CAP_STD,
+	},
+
+};
+
+static struct disp_route adv7343_routes[] = {
+	{
+		.output = ADV7343_COMPOSITE_ID,
+	},
+	{
+		.output = ADV7343_SVIDEO_ID,
+	},
+	{
+		.output = ADV7343_COMPONENT_ID,
+	},
+};
+
+static struct adv7343_platform_data adv7343_data = {
+	.mode_config = {
+		.sleep_mode = false,
+		.pll_control = false,
+		.dac_1 = true,
+		.dac_2 = true,
+		.dac_3 = true,
+		.dac_4 = true,
+		.dac_5 = true,
+		.dac_6 = true,
+	},
+	.sd_config = {
+		.sd_dac_out1 = false,
+		.sd_dac_out2 = false,
+	},
+};
+
+static struct bfin_display_config bfin_display_data = {
+	.card_name = "BF609",
+	.outputs = adv7343_outputs,
+	.num_outputs = ARRAY_SIZE(adv7343_outputs),
+	.routes = adv7343_routes,
+	.i2c_adapter_id = 0,
+	.board_info = {
+		.type = "adv7343",
+		.addr = 0x2b,
+		.platform_data = (void *)&adv7343_data,
+	},
+	.ppi_info = &ppi_info_disp,
+	.ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FS1LO_FS2LO
+			| EPPI_CTL_POLC3 | EPPI_CTL_BLANKGEN | EPPI_CTL_SYNC2
+			| EPPI_CTL_NON656 | EPPI_CTL_DIR),
+};
+#endif
+
 static struct platform_device bfin_display_device = {
 	.name = "bfin_display",
 	.dev = {
diff --git a/arch/blackfin/mach-bf609/clock.c b/arch/blackfin/mach-bf609/clock.c
index 437d56c..dab8849 100644
--- a/arch/blackfin/mach-bf609/clock.c
+++ b/arch/blackfin/mach-bf609/clock.c
@@ -220,6 +220,12 @@ unsigned long sys_clk_get_rate(struct clk *clk)
 	}
 }
 
+unsigned long dummy_get_rate(struct clk *clk)
+{
+	clk->parent->rate = clk_get_rate(clk->parent);
+	return clk->parent->rate;
+}
+
 unsigned long sys_clk_round_rate(struct clk *clk, unsigned long rate)
 {
 	unsigned long max_rate;
@@ -283,6 +289,10 @@ static struct clk_ops sys_clk_ops = {
 	.round_rate = sys_clk_round_rate,
 };
 
+static struct clk_ops dummy_clk_ops = {
+	.get_rate = dummy_get_rate,
+};
+
 static struct clk sys_clkin = {
 	.name       = "SYS_CLKIN",
 	.rate       = CONFIG_CLKIN_HZ,
@@ -364,6 +374,12 @@ static struct clk oclk = {
 	.parent     = &pll_clk,
 };
 
+static struct clk ethclk = {
+	.name       = "stmmaceth",
+	.parent     = &sclk0,
+	.ops	    = &dummy_clk_ops,
+};
+
 static struct clk_lookup bf609_clks[] = {
 	CLK(sys_clkin, NULL, "SYS_CLKIN"),
 	CLK(pll_clk, NULL, "PLLCLK"),
@@ -375,6 +391,7 @@ static struct clk_lookup bf609_clks[] = {
 	CLK(sclk1, NULL, "SCLK1"),
 	CLK(dclk, NULL, "DCLK"),
 	CLK(oclk, NULL, "OCLK"),
+	CLK(ethclk, NULL, "stmmaceth"),
 };
 
 int __init clk_init(void)
diff --git a/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h b/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h
index f1a6afa..35caa7b 100644
--- a/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h
+++ b/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h
@@ -839,6 +839,16 @@
 #define PORTG_LOCK                  0xFFC03344         /* PORTG Port x GPIO Lock Register */
 #define PORTG_REVID                 0xFFC0337C         /* PORTG Port x GPIO Revision ID */
 
+/* ==================================================
+        Pads Controller Registers
+   ================================================== */
+
+/* =========================
+        PADS0
+   ========================= */
+#define PADS0_EMAC_PTP_CLKSEL	    0xFFC03404         /* PADS0 Clock Selection for EMAC and PTP */
+#define PADS0_TWI_VSEL		    0xFFC03408         /* PADS0 TWI Voltage Selection */
+#define PADS0_PORTS_HYST	    0xFFC03440         /* PADS0 Hysteresis Enable Register */
 
 /* =========================
         PINT Registers
diff --git a/arch/blackfin/mach-bf609/scb.c b/arch/blackfin/mach-bf609/scb.c
new file mode 100644
index 0000000..ac1f07c
--- /dev/null
+++ b/arch/blackfin/mach-bf609/scb.c
@@ -0,0 +1,363 @@
+/*
+ * arch/blackfin/mach-common/scb-init.c - reprogram system cross bar priority
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <asm/blackfin.h>
+#include <asm/scb.h>
+
+struct scb_mi_prio scb_data[] = {
+#ifdef CONFIG_SCB0_MI0
+	{ REG_SCB0_ARBR0, REG_SCB0_ARBW0, 32, {
+		CONFIG_SCB0_MI0_SLOT0,
+		CONFIG_SCB0_MI0_SLOT1,
+		CONFIG_SCB0_MI0_SLOT2,
+		CONFIG_SCB0_MI0_SLOT3,
+		CONFIG_SCB0_MI0_SLOT4,
+		CONFIG_SCB0_MI0_SLOT5,
+		CONFIG_SCB0_MI0_SLOT6,
+		CONFIG_SCB0_MI0_SLOT7,
+		CONFIG_SCB0_MI0_SLOT8,
+		CONFIG_SCB0_MI0_SLOT9,
+		CONFIG_SCB0_MI0_SLOT10,
+		CONFIG_SCB0_MI0_SLOT11,
+		CONFIG_SCB0_MI0_SLOT12,
+		CONFIG_SCB0_MI0_SLOT13,
+		CONFIG_SCB0_MI0_SLOT14,
+		CONFIG_SCB0_MI0_SLOT15,
+		CONFIG_SCB0_MI0_SLOT16,
+		CONFIG_SCB0_MI0_SLOT17,
+		CONFIG_SCB0_MI0_SLOT18,
+		CONFIG_SCB0_MI0_SLOT19,
+		CONFIG_SCB0_MI0_SLOT20,
+		CONFIG_SCB0_MI0_SLOT21,
+		CONFIG_SCB0_MI0_SLOT22,
+		CONFIG_SCB0_MI0_SLOT23,
+		CONFIG_SCB0_MI0_SLOT24,
+		CONFIG_SCB0_MI0_SLOT25,
+		CONFIG_SCB0_MI0_SLOT26,
+		CONFIG_SCB0_MI0_SLOT27,
+		CONFIG_SCB0_MI0_SLOT28,
+		CONFIG_SCB0_MI0_SLOT29,
+		CONFIG_SCB0_MI0_SLOT30,
+		CONFIG_SCB0_MI0_SLOT31
+		},
+	},
+#endif
+#ifdef CONFIG_SCB0_MI1
+	{ REG_SCB0_ARBR1, REG_SCB0_ARBW1, 32, {
+		CONFIG_SCB0_MI1_SLOT0,
+		CONFIG_SCB0_MI1_SLOT1,
+		CONFIG_SCB0_MI1_SLOT2,
+		CONFIG_SCB0_MI1_SLOT3,
+		CONFIG_SCB0_MI1_SLOT4,
+		CONFIG_SCB0_MI1_SLOT5,
+		CONFIG_SCB0_MI1_SLOT6,
+		CONFIG_SCB0_MI1_SLOT7,
+		CONFIG_SCB0_MI1_SLOT8,
+		CONFIG_SCB0_MI1_SLOT9,
+		CONFIG_SCB0_MI1_SLOT10,
+		CONFIG_SCB0_MI1_SLOT11,
+		CONFIG_SCB0_MI1_SLOT12,
+		CONFIG_SCB0_MI1_SLOT13,
+		CONFIG_SCB0_MI1_SLOT14,
+		CONFIG_SCB0_MI1_SLOT15,
+		CONFIG_SCB0_MI1_SLOT16,
+		CONFIG_SCB0_MI1_SLOT17,
+		CONFIG_SCB0_MI1_SLOT18,
+		CONFIG_SCB0_MI1_SLOT19,
+		CONFIG_SCB0_MI1_SLOT20,
+		CONFIG_SCB0_MI1_SLOT21,
+		CONFIG_SCB0_MI1_SLOT22,
+		CONFIG_SCB0_MI1_SLOT23,
+		CONFIG_SCB0_MI1_SLOT24,
+		CONFIG_SCB0_MI1_SLOT25,
+		CONFIG_SCB0_MI1_SLOT26,
+		CONFIG_SCB0_MI1_SLOT27,
+		CONFIG_SCB0_MI1_SLOT28,
+		CONFIG_SCB0_MI1_SLOT29,
+		CONFIG_SCB0_MI1_SLOT30,
+		CONFIG_SCB0_MI1_SLOT31
+		},
+	},
+#endif
+#ifdef CONFIG_SCB0_MI2
+	{ REG_SCB0_ARBR2, REG_SCB0_ARBW2, 32, {
+		CONFIG_SCB0_MI2_SLOT0,
+		CONFIG_SCB0_MI2_SLOT1,
+		CONFIG_SCB0_MI2_SLOT2,
+		CONFIG_SCB0_MI2_SLOT3,
+		CONFIG_SCB0_MI2_SLOT4,
+		CONFIG_SCB0_MI2_SLOT5,
+		CONFIG_SCB0_MI2_SLOT6,
+		CONFIG_SCB0_MI2_SLOT7,
+		CONFIG_SCB0_MI2_SLOT8,
+		CONFIG_SCB0_MI2_SLOT9,
+		CONFIG_SCB0_MI2_SLOT10,
+		CONFIG_SCB0_MI2_SLOT11,
+		CONFIG_SCB0_MI2_SLOT12,
+		CONFIG_SCB0_MI2_SLOT13,
+		CONFIG_SCB0_MI2_SLOT14,
+		CONFIG_SCB0_MI2_SLOT15,
+		CONFIG_SCB0_MI2_SLOT16,
+		CONFIG_SCB0_MI2_SLOT17,
+		CONFIG_SCB0_MI2_SLOT18,
+		CONFIG_SCB0_MI2_SLOT19,
+		CONFIG_SCB0_MI2_SLOT20,
+		CONFIG_SCB0_MI2_SLOT21,
+		CONFIG_SCB0_MI2_SLOT22,
+		CONFIG_SCB0_MI2_SLOT23,
+		CONFIG_SCB0_MI2_SLOT24,
+		CONFIG_SCB0_MI2_SLOT25,
+		CONFIG_SCB0_MI2_SLOT26,
+		CONFIG_SCB0_MI2_SLOT27,
+		CONFIG_SCB0_MI2_SLOT28,
+		CONFIG_SCB0_MI2_SLOT29,
+		CONFIG_SCB0_MI2_SLOT30,
+		CONFIG_SCB0_MI2_SLOT31
+		},
+	},
+#endif
+#ifdef CONFIG_SCB0_MI3
+	{ REG_SCB0_ARBR3, REG_SCB0_ARBW3, 32, {
+		CONFIG_SCB0_MI3_SLOT0,
+		CONFIG_SCB0_MI3_SLOT1,
+		CONFIG_SCB0_MI3_SLOT2,
+		CONFIG_SCB0_MI3_SLOT3,
+		CONFIG_SCB0_MI3_SLOT4,
+		CONFIG_SCB0_MI3_SLOT5,
+		CONFIG_SCB0_MI3_SLOT6,
+		CONFIG_SCB0_MI3_SLOT7,
+		CONFIG_SCB0_MI3_SLOT8,
+		CONFIG_SCB0_MI3_SLOT9,
+		CONFIG_SCB0_MI3_SLOT10,
+		CONFIG_SCB0_MI3_SLOT11,
+		CONFIG_SCB0_MI3_SLOT12,
+		CONFIG_SCB0_MI3_SLOT13,
+		CONFIG_SCB0_MI3_SLOT14,
+		CONFIG_SCB0_MI3_SLOT15,
+		CONFIG_SCB0_MI3_SLOT16,
+		CONFIG_SCB0_MI3_SLOT17,
+		CONFIG_SCB0_MI3_SLOT18,
+		CONFIG_SCB0_MI3_SLOT19,
+		CONFIG_SCB0_MI3_SLOT20,
+		CONFIG_SCB0_MI3_SLOT21,
+		CONFIG_SCB0_MI3_SLOT22,
+		CONFIG_SCB0_MI3_SLOT23,
+		CONFIG_SCB0_MI3_SLOT24,
+		CONFIG_SCB0_MI3_SLOT25,
+		CONFIG_SCB0_MI3_SLOT26,
+		CONFIG_SCB0_MI3_SLOT27,
+		CONFIG_SCB0_MI3_SLOT28,
+		CONFIG_SCB0_MI3_SLOT29,
+		CONFIG_SCB0_MI3_SLOT30,
+		CONFIG_SCB0_MI3_SLOT31
+		},
+	},
+#endif
+#ifdef CONFIG_SCB0_MI4
+	{ REG_SCB0_ARBR4, REG_SCB4_ARBW0, 32, {
+		CONFIG_SCB0_MI4_SLOT0,
+		CONFIG_SCB0_MI4_SLOT1,
+		CONFIG_SCB0_MI4_SLOT2,
+		CONFIG_SCB0_MI4_SLOT3,
+		CONFIG_SCB0_MI4_SLOT4,
+		CONFIG_SCB0_MI4_SLOT5,
+		CONFIG_SCB0_MI4_SLOT6,
+		CONFIG_SCB0_MI4_SLOT7,
+		CONFIG_SCB0_MI4_SLOT8,
+		CONFIG_SCB0_MI4_SLOT9,
+		CONFIG_SCB0_MI4_SLOT10,
+		CONFIG_SCB0_MI4_SLOT11,
+		CONFIG_SCB0_MI4_SLOT12,
+		CONFIG_SCB0_MI4_SLOT13,
+		CONFIG_SCB0_MI4_SLOT14,
+		CONFIG_SCB0_MI4_SLOT15,
+		CONFIG_SCB0_MI4_SLOT16,
+		CONFIG_SCB0_MI4_SLOT17,
+		CONFIG_SCB0_MI4_SLOT18,
+		CONFIG_SCB0_MI4_SLOT19,
+		CONFIG_SCB0_MI4_SLOT20,
+		CONFIG_SCB0_MI4_SLOT21,
+		CONFIG_SCB0_MI4_SLOT22,
+		CONFIG_SCB0_MI4_SLOT23,
+		CONFIG_SCB0_MI4_SLOT24,
+		CONFIG_SCB0_MI4_SLOT25,
+		CONFIG_SCB0_MI4_SLOT26,
+		CONFIG_SCB0_MI4_SLOT27,
+		CONFIG_SCB0_MI4_SLOT28,
+		CONFIG_SCB0_MI4_SLOT29,
+		CONFIG_SCB0_MI4_SLOT30,
+		CONFIG_SCB0_MI4_SLOT31
+		},
+	},
+#endif
+#ifdef CONFIG_SCB0_MI5
+	{ REG_SCB0_ARBR5, REG_SCB0_ARBW5, 16, {
+		CONFIG_SCB0_MI5_SLOT0,
+		CONFIG_SCB0_MI5_SLOT1,
+		CONFIG_SCB0_MI5_SLOT2,
+		CONFIG_SCB0_MI5_SLOT3,
+		CONFIG_SCB0_MI5_SLOT4,
+		CONFIG_SCB0_MI5_SLOT5,
+		CONFIG_SCB0_MI5_SLOT6,
+		CONFIG_SCB0_MI5_SLOT7,
+		CONFIG_SCB0_MI5_SLOT8,
+		CONFIG_SCB0_MI5_SLOT9,
+		CONFIG_SCB0_MI5_SLOT10,
+		CONFIG_SCB0_MI5_SLOT11,
+		CONFIG_SCB0_MI5_SLOT12,
+		CONFIG_SCB0_MI5_SLOT13,
+		CONFIG_SCB0_MI5_SLOT14,
+		CONFIG_SCB0_MI5_SLOT15
+		},
+	},
+#endif
+#ifdef CONFIG_SCB1_MI0
+	{ REG_SCB1_ARBR0, REG_SCB1_ARBW0, 20, {
+		CONFIG_SCB1_MI0_SLOT0,
+		CONFIG_SCB1_MI0_SLOT1,
+		CONFIG_SCB1_MI0_SLOT2,
+		CONFIG_SCB1_MI0_SLOT3,
+		CONFIG_SCB1_MI0_SLOT4,
+		CONFIG_SCB1_MI0_SLOT5,
+		CONFIG_SCB1_MI0_SLOT6,
+		CONFIG_SCB1_MI0_SLOT7,
+		CONFIG_SCB1_MI0_SLOT8,
+		CONFIG_SCB1_MI0_SLOT9,
+		CONFIG_SCB1_MI0_SLOT10,
+		CONFIG_SCB1_MI0_SLOT11,
+		CONFIG_SCB1_MI0_SLOT12,
+		CONFIG_SCB1_MI0_SLOT13,
+		CONFIG_SCB1_MI0_SLOT14,
+		CONFIG_SCB1_MI0_SLOT15,
+		CONFIG_SCB1_MI0_SLOT16,
+		CONFIG_SCB1_MI0_SLOT17,
+		CONFIG_SCB1_MI0_SLOT18,
+		CONFIG_SCB1_MI0_SLOT19
+		},
+	},
+#endif
+#ifdef CONFIG_SCB2_MI0
+	{ REG_SCB2_ARBR0, REG_SCB2_ARBW0, 10, {
+		CONFIG_SCB2_MI0_SLOT0,
+		CONFIG_SCB2_MI0_SLOT1,
+		CONFIG_SCB2_MI0_SLOT2,
+		CONFIG_SCB2_MI0_SLOT3,
+		CONFIG_SCB2_MI0_SLOT4,
+		CONFIG_SCB2_MI0_SLOT5,
+		CONFIG_SCB2_MI0_SLOT6,
+		CONFIG_SCB2_MI0_SLOT7,
+		CONFIG_SCB2_MI0_SLOT8,
+		CONFIG_SCB2_MI0_SLOT9
+		},
+	},
+#endif
+#ifdef CONFIG_SCB3_MI0
+	{ REG_SCB3_ARBR0, REG_SCB3_ARBW0, 16, {
+		CONFIG_SCB3_MI0_SLOT0,
+		CONFIG_SCB3_MI0_SLOT1,
+		CONFIG_SCB3_MI0_SLOT2,
+		CONFIG_SCB3_MI0_SLOT3,
+		CONFIG_SCB3_MI0_SLOT4,
+		CONFIG_SCB3_MI0_SLOT5,
+		CONFIG_SCB3_MI0_SLOT6,
+		CONFIG_SCB3_MI0_SLOT7,
+		CONFIG_SCB3_MI0_SLOT8,
+		CONFIG_SCB3_MI0_SLOT9,
+		CONFIG_SCB3_MI0_SLOT10,
+		CONFIG_SCB3_MI0_SLOT11,
+		CONFIG_SCB3_MI0_SLOT12,
+		CONFIG_SCB3_MI0_SLOT13,
+		CONFIG_SCB3_MI0_SLOT14,
+		CONFIG_SCB3_MI0_SLOT15
+		},
+	},
+#endif
+#ifdef CONFIG_SCB4_MI0
+	{ REG_SCB4_ARBR0, REG_SCB4_ARBW0, 16, {
+		CONFIG_SCB4_MI0_SLOT0,
+		CONFIG_SCB4_MI0_SLOT1,
+		CONFIG_SCB4_MI0_SLOT2,
+		CONFIG_SCB4_MI0_SLOT3,
+		CONFIG_SCB4_MI0_SLOT4,
+		CONFIG_SCB4_MI0_SLOT5,
+		CONFIG_SCB4_MI0_SLOT6,
+		CONFIG_SCB4_MI0_SLOT7,
+		CONFIG_SCB4_MI0_SLOT8,
+		CONFIG_SCB4_MI0_SLOT9,
+		CONFIG_SCB4_MI0_SLOT10,
+		CONFIG_SCB4_MI0_SLOT11,
+		CONFIG_SCB4_MI0_SLOT12,
+		CONFIG_SCB4_MI0_SLOT13,
+		CONFIG_SCB4_MI0_SLOT14,
+		CONFIG_SCB4_MI0_SLOT15
+		},
+	},
+#endif
+#ifdef CONFIG_SCB5_MI0
+	{ REG_SCB5_ARBR0, REG_SCB5_ARBW0, 8, {
+		CONFIG_SCB5_MI0_SLOT0,
+		CONFIG_SCB5_MI0_SLOT1,
+		CONFIG_SCB5_MI0_SLOT2,
+		CONFIG_SCB5_MI0_SLOT3,
+		CONFIG_SCB5_MI0_SLOT4,
+		CONFIG_SCB5_MI0_SLOT5,
+		CONFIG_SCB5_MI0_SLOT6,
+		CONFIG_SCB5_MI0_SLOT7
+		},
+	},
+#endif
+#ifdef CONFIG_SCB6_MI0
+	{ REG_SCB6_ARBR0, REG_SCB6_ARBW0, 4, {
+		CONFIG_SCB6_MI0_SLOT0,
+		CONFIG_SCB6_MI0_SLOT1,
+		CONFIG_SCB6_MI0_SLOT2,
+		CONFIG_SCB6_MI0_SLOT3
+		},
+	},
+#endif
+#ifdef CONFIG_SCB7_MI0
+	{ REG_SCB7_ARBR0, REG_SCB7_ARBW0, 6, {
+		CONFIG_SCB7_MI0_SLOT0,
+		CONFIG_SCB7_MI0_SLOT1,
+		CONFIG_SCB7_MI0_SLOT2,
+		CONFIG_SCB7_MI0_SLOT3,
+		CONFIG_SCB7_MI0_SLOT4,
+		CONFIG_SCB7_MI0_SLOT5
+		},
+	},
+#endif
+#ifdef CONFIG_SCB8_MI0
+	{ REG_SCB8_ARBR0, REG_SCB8_ARBW0, 8, {
+		CONFIG_SCB8_MI0_SLOT0,
+		CONFIG_SCB8_MI0_SLOT1,
+		CONFIG_SCB8_MI0_SLOT2,
+		CONFIG_SCB8_MI0_SLOT3,
+		CONFIG_SCB8_MI0_SLOT4,
+		CONFIG_SCB8_MI0_SLOT5,
+		CONFIG_SCB8_MI0_SLOT6,
+		CONFIG_SCB8_MI0_SLOT7
+		},
+	},
+#endif
+#ifdef CONFIG_SCB9_MI0
+	{ REG_SCB9_ARBR0, REG_SCB9_ARBW0, 10, {
+		CONFIG_SCB9_MI0_SLOT0,
+		CONFIG_SCB9_MI0_SLOT1,
+		CONFIG_SCB9_MI0_SLOT2,
+		CONFIG_SCB9_MI0_SLOT3,
+		CONFIG_SCB9_MI0_SLOT4,
+		CONFIG_SCB9_MI0_SLOT5,
+		CONFIG_SCB9_MI0_SLOT6,
+		CONFIG_SCB9_MI0_SLOT7,
+		CONFIG_SCB9_MI0_SLOT8,
+		CONFIG_SCB9_MI0_SLOT9
+		},
+	},
+#endif
+	{ 0, }
+};
diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile
index 675466d..f099792 100644
--- a/arch/blackfin/mach-common/Makefile
+++ b/arch/blackfin/mach-common/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_PM)          += pm.o
 ifneq ($(CONFIG_BF60x),y)
 obj-$(CONFIG_PM)	  += dpmc_modes.o
 endif
+obj-$(CONFIG_SCB_PRIORITY)	+= scb-init.o
 obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o
 obj-$(CONFIG_SMP)         += smp.o
 obj-$(CONFIG_BFIN_KERNEL_CLOCK) += clocks-init.o
diff --git a/arch/blackfin/mach-common/scb-init.c b/arch/blackfin/mach-common/scb-init.c
new file mode 100644
index 0000000..2cbfb0b
--- /dev/null
+++ b/arch/blackfin/mach-common/scb-init.c
@@ -0,0 +1,53 @@
+/*
+ * arch/blackfin/mach-common/scb-init.c - reprogram system cross bar priority
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <asm/scb.h>
+
+__attribute__((l1_text))
+inline void scb_mi_write(unsigned long scb_mi_arbw, unsigned int slots,
+		unsigned char *scb_mi_prio)
+{
+	unsigned int i;
+
+	for (i = 0; i < slots; ++i)
+		bfin_write32(scb_mi_arbw, (i << SCB_SLOT_OFFSET) | scb_mi_prio[i]);
+}
+
+__attribute__((l1_text))
+inline void scb_mi_read(unsigned long scb_mi_arbw, unsigned int slots,
+		unsigned char *scb_mi_prio)
+{
+	unsigned int i;
+
+	for (i = 0; i < slots; ++i) {
+		bfin_write32(scb_mi_arbw, (0xFF << SCB_SLOT_OFFSET) | i);
+		scb_mi_prio[i] = bfin_read32(scb_mi_arbw);
+	}
+}
+
+__attribute__((l1_text))
+void init_scb(void)
+{
+	unsigned int i, j;
+	unsigned char scb_tmp_prio[32];
+
+	pr_info("Init System Crossbar\n");
+	for (i = 0; scb_data[i].scb_mi_arbr > 0; ++i) {
+
+		scb_mi_write(scb_data[i].scb_mi_arbw, scb_data[i].scb_mi_slots, scb_data[i].scb_mi_prio);
+
+		pr_debug("scb priority at 0x%lx:\n", scb_data[i].scb_mi_arbr);
+		scb_mi_read(scb_data[i].scb_mi_arbw, scb_data[i].scb_mi_slots, scb_tmp_prio);
+		for (j = 0; j < scb_data[i].scb_mi_slots; ++j)
+			pr_debug("slot %d = %d\n", j, scb_tmp_prio[j]);
+	}
+
+}
diff --git a/arch/c6x/Kconfig b/arch/c6x/Kconfig
index f6a3648..957dd00 100644
--- a/arch/c6x/Kconfig
+++ b/arch/c6x/Kconfig
@@ -10,7 +10,6 @@ config C6X
 	select GENERIC_IRQ_SHOW
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_DMA_API_DEBUG
-	select HAVE_GENERIC_HARDIRQS
 	select HAVE_MEMBLOCK
 	select SPARSE_IRQ
 	select IRQ_DOMAIN
diff --git a/arch/c6x/kernel/devicetree.c b/arch/c6x/kernel/devicetree.c
index bdb56f0..9e15ab9 100644
--- a/arch/c6x/kernel/devicetree.c
+++ b/arch/c6x/kernel/devicetree.c
@@ -33,8 +33,7 @@ void __init early_init_devtree(void *params)
 
 
 #ifdef CONFIG_BLK_DEV_INITRD
-void __init early_init_dt_setup_initrd_arch(unsigned long start,
-		unsigned long end)
+void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
 {
 	initrd_start = (unsigned long)__va(start);
 	initrd_end = (unsigned long)__va(end);
@@ -46,8 +45,3 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 {
 	c6x_add_memory(base, size);
 }
-
-void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
-{
-	return __va(memblock_alloc(size, align));
-}
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 3201ddb..02380be 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -41,7 +41,6 @@ config CRIS
 	default y
 	select HAVE_IDE
 	select GENERIC_ATOMIC64
-	select HAVE_GENERIC_HARDIRQS
 	select HAVE_UID16
 	select VIRT_TO_BUS
 	select ARCH_WANT_IPC_PARSE_VERSION
@@ -99,9 +98,6 @@ config ETRAX_KMALLOCED_MODULES
 	help
 	  Enable module allocation with kmalloc instead of vmalloc.
 
-config OOM_REBOOT
-       bool "Enable reboot at out of memory"
-
 source "kernel/Kconfig.preempt"
 
 source mm/Kconfig
@@ -175,12 +171,6 @@ config ETRAX_FLASH_BUSWIDTH
 	help
 	  Width in bytes of the NOR Flash bus (1, 2 or 4). Is usually 2.
 
-config ETRAX_NANDFLASH_BUSWIDTH
-	int "Buswidth of NAND flash in bytes"
-	default "1"
-	help
-	  Width in bytes of the NAND flash (1 or 2).
-
 config ETRAX_FLASH1_SIZE
        int "FLASH1 size (dec, in MB. 0 = Unknown)"
        default "0"
@@ -272,38 +262,6 @@ config ETRAX_AXISFLASHMAP
 	  This option enables MTD mapping of flash devices.  Needed to use
 	  flash memories.  If unsure, say Y.
 
-config ETRAX_RTC
-	bool "Real Time Clock support"
-	depends on ETRAX_I2C
-	help
-	  Enables drivers for the Real-Time Clock battery-backed chips on
-	  some products. The kernel reads the time when booting, and
-	  the date can be set using ioctl(fd, RTC_SET_TIME, &rt) with rt a
-	  rtc_time struct (see <file:arch/cris/include/asm/rtc.h>) on the
-	  /dev/rtc device.  You can check the time with cat /proc/rtc, but
-	  normal time reading should be done using libc function time and
-	  friends.
-
-choice
-	prompt "RTC chip"
-	depends on ETRAX_RTC
-	default ETRAX_DS1302
-
-config ETRAX_DS1302
-	depends on ETRAX_ARCH_V10
-	bool "DS1302"
-	help
-	  Enables the driver for the DS1302 Real-Time Clock battery-backed
-	  chip on some products.
-
-config ETRAX_PCF8563
-	bool "PCF8563"
-	help
-	  Enables the driver for the PCF8563 Real-Time Clock battery-backed
-	  chip on some products.
-
-endchoice
-
 config ETRAX_SYNCHRONOUS_SERIAL
 	bool "Synchronous serial-port support"
 	help
@@ -578,26 +536,6 @@ config ETRAX_SERIAL_PORT3_DMA5_IN
 	depends on ETRAX_ARCH_V10
 	bool "DMA 5"
 
-config ETRAX_SERIAL_PORT3_DMA9_IN
-	bool "Ser3 uses DMA9 for input"
-	depends on ETRAXFS
-	help
-	  Enables the DMA9 input channel for ser3 (ttyS3).
-	  If you do not enable DMA, an interrupt for each character will be
-	  used when receiving data.
-	  Normally you want to use DMA, unless you use the DMA channel for
-	  something else.
-
-config ETRAX_SERIAL_PORT3_DMA3_IN
-	bool "Ser3 uses DMA3 for input"
-	depends on CRIS_MACH_ARTPEC3
-	help
-	  Enables the DMA3 input channel for ser3 (ttyS3).
-	  If you do not enable DMA, an interrupt for each character will be
-	  used when receiving data.
-	  Normally you want to use DMA, unless you use the DMA channel for
-	  something else.
-
 endchoice
 
 choice
@@ -615,26 +553,6 @@ config ETRAX_SERIAL_PORT3_DMA4_OUT
 	depends on ETRAX_ARCH_V10
 	bool "DMA 4"
 
-config ETRAX_SERIAL_PORT3_DMA8_OUT
-	bool "Ser3 uses DMA8 for output"
-	depends on ETRAXFS
-	help
-	  Enables the DMA8 output channel for ser3 (ttyS3).
-	  If you do not enable DMA, an interrupt for each character will be
-	  used when transmitting data.
-	  Normally you want to use DMA, unless you use the DMA channel for
-	  something else.
-
-config ETRAX_SERIAL_PORT3_DMA2_OUT
-	bool "Ser3 uses DMA2 for output"
-	depends on CRIS_MACH_ARTPEC3
-	help
-	  Enables the DMA2 output channel for ser3 (ttyS3).
-	  If you do not enable DMA, an interrupt for each character will be
-	  used when transmitting data.
-	  Normally you want to use DMA, unless you use the DMA channel for
-	  something else.
-
 endchoice
 
 endmenu
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig
index daf5f19..239dab0 100644
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -417,16 +417,6 @@ config ETRAX_USB_HOST
 	   for CTRL and BULK traffic only, INTR traffic may work as well
 	   however (depending on the requirements of timeliness).
 
-config ETRAX_USB_HOST_PORT1
-	bool "USB port 1 enabled"
-	depends on ETRAX_USB_HOST
-	default n
-
-config ETRAX_USB_HOST_PORT2
-	bool "USB port 2 enabled"
-	depends on ETRAX_USB_HOST
-	default n
-
 config ETRAX_PTABLE_SECTOR
 	int "Byte-offset of partition table sector"
 	depends on ETRAX_AXISFLASHMAP
@@ -527,19 +517,6 @@ config ETRAX_GPIO
 	  Remember that you need to setup the port directions appropriately in
 	  the General configuration.
 
-config ETRAX_PA_BUTTON_BITMASK
-	hex "PA-buttons bitmask"
-	depends on ETRAX_GPIO
-	default "02"
-	help
-	  This is a bitmask with information about what bits on PA that
-	  are used for buttons.
-	  Most products has a so called TEST button on PA1, if that's true
-	  use 02 here.
-	  Use 00 if there are no buttons on PA.
-	  If the bitmask is <> 00 a button driver will be included in the gpio
-	  driver. ETRAX general I/O support must be enabled.
-
 config ETRAX_PA_CHANGEABLE_DIR
 	hex "PA user changeable dir mask"
 	depends on ETRAX_GPIO
@@ -580,51 +557,4 @@ config ETRAX_PB_CHANGEABLE_BITS
 	  Bit set = changeable.
 	  You probably want 00 here.
 
-config ETRAX_DS1302_RST_ON_GENERIC_PORT
-	bool "DS1302 RST on Generic Port"
-	depends on ETRAX_DS1302
-	help
-	  If your product has the RST signal line for the DS1302 RTC on the
-	  Generic Port then say Y here, otherwise leave it as N in which
-	  case the RST signal line is assumed to be connected to Port PB
-	  (just like the SCL and SDA lines).
-
-config ETRAX_DS1302_RSTBIT
-	int "DS1302 RST bit number"
-	depends on ETRAX_DS1302
-	default "2"
-	help
-	  This is the bit number for the RST signal line of the DS1302 RTC on
-	  the selected port. If you have selected the generic port then it
-	  should be bit 27, otherwise your best bet is bit 5.
-
-config ETRAX_DS1302_SCLBIT
-	int "DS1302 SCL bit number"
-	depends on ETRAX_DS1302
-	default "1"
-	help
-	  This is the bit number for the SCL signal line of the DS1302 RTC on
-	  Port PB. This is probably best left at 3.
-
-config ETRAX_DS1302_SDABIT
-	int "DS1302 SDA bit number"
-	depends on ETRAX_DS1302
-	default "0"
-	help
-	  This is the bit number for the SDA signal line of the DS1302 RTC on
-	  Port PB. This is probably best left at 2.
-
-config ETRAX_DS1302_TRICKLE_CHARGE
-	int "DS1302 Trickle charger value"
-	depends on ETRAX_DS1302
-	default "0"
-	help
-	  This controls the initial value of the trickle charge register.
-	  0 = disabled (use this if you are unsure or have a non rechargeable battery)
-	  Otherwise the following values can be OR:ed together to control the
-	  charge current:
-	  1 = 2kohm, 2 = 4kohm, 3 = 4kohm
-	  4 = 1 diode, 8 = 2 diodes
-	  Allowed values are (increasing current): 0, 11, 10, 9, 7, 6, 5
-
 endif
diff --git a/arch/cris/arch-v10/drivers/Makefile b/arch/cris/arch-v10/drivers/Makefile
index 44bf2e8..e5c1318 100644
--- a/arch/cris/arch-v10/drivers/Makefile
+++ b/arch/cris/arch-v10/drivers/Makefile
@@ -6,7 +6,5 @@ obj-$(CONFIG_ETRAX_AXISFLASHMAP)	+= axisflashmap.o
 obj-$(CONFIG_ETRAX_I2C)			+= i2c.o
 obj-$(CONFIG_ETRAX_I2C_EEPROM)		+= eeprom.o
 obj-$(CONFIG_ETRAX_GPIO)		+= gpio.o
-obj-$(CONFIG_ETRAX_DS1302)		+= ds1302.o
-obj-$(CONFIG_ETRAX_PCF8563)		+= pcf8563.o
 obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL)	+= sync_serial.o
 
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index 1d866d3..6792503 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -19,64 +19,6 @@ config ETRAX_NO_PHY
 	  switch. This option should normally be disabled. If enabled,
 	  speed and duplex will be locked to 100 Mbit and full duplex.
 
-config ETRAX_ETHERNET_IFACE0
-	depends on ETRAX_ETHERNET
-	bool "Enable network interface 0"
-
-config ETRAX_ETHERNET_IFACE1
-	depends on (ETRAX_ETHERNET && ETRAXFS)
-	bool "Enable network interface 1 (uses DMA6 and DMA7)"
-
-config ETRAX_ETHERNET_GBIT
-	depends on (ETRAX_ETHERNET && CRIS_MACH_ARTPEC3)
-	bool "Enable gigabit Ethernet support"
-
-choice
-	prompt "Eth0 led group"
-	depends on ETRAX_ETHERNET_IFACE0
-	default ETRAX_ETH0_USE_LEDGRP0
-
-config ETRAX_ETH0_USE_LEDGRP0
-	bool "Use LED grp 0"
-	depends on ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO
-	help
-	  Use LED grp 0 for eth0
-
-config ETRAX_ETH0_USE_LEDGRP1
-	bool "Use LED grp 1"
-	depends on ETRAX_NBR_LED_GRP_TWO
-	help
-	  Use LED grp 1 for eth0
-
-config ETRAX_ETH0_USE_LEDGRPNULL
-	bool "Use no LEDs for eth0"
-	help
-	  Use no LEDs for eth0
-endchoice
-
-choice
-	prompt "Eth1 led group"
-	depends on ETRAX_ETHERNET_IFACE1
-	default ETRAX_ETH1_USE_LEDGRP1
-
-config ETRAX_ETH1_USE_LEDGRP0
-	bool "Use LED grp 0"
-	depends on ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO
-	help
-	  Use LED grp 0 for eth1
-
-config ETRAX_ETH1_USE_LEDGRP1
-	bool "Use LED grp 1"
-	depends on ETRAX_NBR_LED_GRP_TWO
-	help
-	  Use LED grp 1 for eth1
-
-config ETRAX_ETH1_USE_LEDGRPNULL
-	bool "Use no LEDs for eth1"
-	help
-	  Use no LEDs for eth1
-endchoice
-
 config ETRAXFS_SERIAL
 	bool "Serial-port support"
 	depends on ETRAX_ARCH_V32
@@ -108,261 +50,24 @@ config ETRAX_SERIAL_PORT0
 	  if you do not need DMA to something else.
 	  ser0 can use dma4 or dma6 for output and dma5 or dma7 for input.
 
-choice
-	prompt "Ser0 default port type "
-	depends on ETRAX_SERIAL_PORT0
-	default ETRAX_SERIAL_PORT0_TYPE_232
-	help
-	  Type of serial port.
-
-config ETRAX_SERIAL_PORT0_TYPE_232
-	bool "Ser0 is a RS-232 port"
-	help
-	  Configure serial port 0 to be a RS-232 port.
-
-config ETRAX_SERIAL_PORT0_TYPE_485HD
-	bool "Ser0 is a half duplex RS-485 port"
-	depends on ETRAX_RS485
-	help
-	  Configure serial port 0 to be a half duplex (two wires) RS-485 port.
-
-config ETRAX_SERIAL_PORT0_TYPE_485FD
-	bool "Ser0 is a full duplex RS-485 port"
-	depends on ETRAX_RS485
-	help
-	  Configure serial port 0 to be a full duplex (four wires) RS-485 port.
-endchoice
-
-config ETRAX_SER0_DTR_BIT
-	string "Ser 0 DTR bit (empty = not used)"
-	depends on ETRAX_SERIAL_PORT0
-
-config ETRAX_SER0_RI_BIT
-	string "Ser 0 RI bit (empty = not used)"
-	depends on ETRAX_SERIAL_PORT0
-
-config ETRAX_SER0_DSR_BIT
-	string "Ser 0 DSR bit (empty = not used)"
-	depends on ETRAX_SERIAL_PORT0
-
-config ETRAX_SER0_CD_BIT
-	string "Ser 0 CD bit (empty = not used)"
-	depends on ETRAX_SERIAL_PORT0
-
 config ETRAX_SERIAL_PORT1
 	bool "Serial port 1 enabled"
 	depends on ETRAXFS_SERIAL
 	help
 	  Enables the ETRAX FS serial driver for ser1 (ttyS1).
 
-choice
-	prompt "Ser1 default port type"
-	depends on ETRAX_SERIAL_PORT1
-	default ETRAX_SERIAL_PORT1_TYPE_232
-	help
-	  Type of serial port.
-
-config ETRAX_SERIAL_PORT1_TYPE_232
-	bool "Ser1 is a RS-232 port"
-	help
-	  Configure serial port 1 to be a RS-232 port.
-
-config ETRAX_SERIAL_PORT1_TYPE_485HD
-	bool "Ser1 is a half duplex RS-485 port"
-	depends on ETRAX_RS485
-	help
-	  Configure serial port 1 to be a half duplex (two wires) RS-485 port.
-
-config ETRAX_SERIAL_PORT1_TYPE_485FD
-	bool "Ser1 is a full duplex RS-485 port"
-	depends on ETRAX_RS485
-	help
-	  Configure serial port 1 to be a full duplex (four wires) RS-485 port.
-endchoice
-
-config ETRAX_SER1_DTR_BIT
-	string "Ser 1 DTR bit (empty = not used)"
-	depends on ETRAX_SERIAL_PORT1
-
-config ETRAX_SER1_RI_BIT
-	string "Ser 1 RI bit (empty = not used)"
-	depends on ETRAX_SERIAL_PORT1
-
-config ETRAX_SER1_DSR_BIT
-	string "Ser 1 DSR bit (empty = not used)"
-	depends on ETRAX_SERIAL_PORT1
-
-config ETRAX_SER1_CD_BIT
-	string "Ser 1 CD bit (empty = not used)"
-	depends on ETRAX_SERIAL_PORT1
-
 config ETRAX_SERIAL_PORT2
 	bool "Serial port 2 enabled"
 	depends on ETRAXFS_SERIAL
 	help
 	  Enables the ETRAX FS serial driver for ser2 (ttyS2).
 
-choice
-	prompt "Ser2 default port type"
-	depends on ETRAX_SERIAL_PORT2
-	default ETRAX_SERIAL_PORT2_TYPE_232
-	help
-	  What DMA channel to use for ser2
-
-config ETRAX_SERIAL_PORT2_TYPE_232
-	bool "Ser2 is a RS-232 port"
-	help
-	  Configure serial port 2 to be a RS-232 port.
-
-config ETRAX_SERIAL_PORT2_TYPE_485HD
-	bool "Ser2 is a half duplex RS-485 port"
-	depends on ETRAX_RS485
-	help
-	  Configure serial port 2 to be a half duplex (two wires) RS-485 port.
-
-config ETRAX_SERIAL_PORT2_TYPE_485FD
-	bool "Ser2 is a full duplex RS-485 port"
-	depends on ETRAX_RS485
-	help
-	  Configure serial port 2 to be a full duplex (four wires) RS-485 port.
-endchoice
-
-
-config ETRAX_SER2_DTR_BIT
-	string "Ser 2 DTR bit (empty = not used)"
-	depends on ETRAX_SERIAL_PORT2
-
-config ETRAX_SER2_RI_BIT
-	string "Ser 2 RI bit (empty = not used)"
-	depends on ETRAX_SERIAL_PORT2
-
-config ETRAX_SER2_DSR_BIT
-	string "Ser 2 DSR bit (empty = not used)"
-	depends on ETRAX_SERIAL_PORT2
-
-config ETRAX_SER2_CD_BIT
-	string "Ser 2 CD bit (empty = not used)"
-	depends on ETRAX_SERIAL_PORT2
-
 config ETRAX_SERIAL_PORT3
 	bool "Serial port 3 enabled"
 	depends on ETRAXFS_SERIAL
 	help
 	  Enables the ETRAX FS serial driver for ser3 (ttyS3).
 
-choice
-	prompt "Ser3 default port type"
-	depends on ETRAX_SERIAL_PORT3
-	default ETRAX_SERIAL_PORT3_TYPE_232
-	help
-	  What DMA channel to use for ser3.
-
-config ETRAX_SERIAL_PORT3_TYPE_232
-	bool "Ser3 is a RS-232 port"
-	help
-	  Configure serial port 3 to be a RS-232 port.
-
-config ETRAX_SERIAL_PORT3_TYPE_485HD
-	bool "Ser3 is a half duplex RS-485 port"
-	depends on ETRAX_RS485
-	help
-	  Configure serial port 3 to be a half duplex (two wires) RS-485 port.
-
-config ETRAX_SERIAL_PORT3_TYPE_485FD
-	bool "Ser3 is a full duplex RS-485 port"
-	depends on ETRAX_RS485
-	help
-	  Configure serial port 3 to be a full duplex (four wires) RS-485 port.
-endchoice
-
-config ETRAX_SER3_DTR_BIT
-	string "Ser 3 DTR bit (empty = not used)"
-	depends on ETRAX_SERIAL_PORT3
-
-config ETRAX_SER3_RI_BIT
-	string "Ser 3 RI bit (empty = not used)"
-	depends on ETRAX_SERIAL_PORT3
-
-config ETRAX_SER3_DSR_BIT
-	string "Ser 3 DSR bit (empty = not used)"
-	depends on ETRAX_SERIAL_PORT3
-
-config ETRAX_SER3_CD_BIT
-	string "Ser 3 CD bit (empty = not used)"
-	depends on ETRAX_SERIAL_PORT3
-
-config ETRAX_SERIAL_PORT4
-	bool "Serial port 4 enabled"
-	depends on ETRAXFS_SERIAL && CRIS_MACH_ARTPEC3
-	help
-	  Enables the ETRAX FS serial driver for ser4 (ttyS4).
-
-choice
-	prompt "Ser4 default port type"
-	depends on ETRAX_SERIAL_PORT4
-	default ETRAX_SERIAL_PORT4_TYPE_232
-	help
-	  What DMA channel to use for ser4.
-
-config ETRAX_SERIAL_PORT4_TYPE_232
-	bool "Ser4 is a RS-232 port"
-	help
-	  Configure serial port 4 to be a RS-232 port.
-
-config ETRAX_SERIAL_PORT4_TYPE_485HD
-	bool "Ser4 is a half duplex RS-485 port"
-	depends on ETRAX_RS485
-	help
-	  Configure serial port 4 to be a half duplex (two wires) RS-485 port.
-
-config ETRAX_SERIAL_PORT4_TYPE_485FD
-	bool "Ser4 is a full duplex RS-485 port"
-	depends on ETRAX_RS485
-	help
-	  Configure serial port 4 to be a full duplex (four wires) RS-485 port.
-endchoice
-
-choice
-	prompt "Ser4 DMA in channel "
-	depends on ETRAX_SERIAL_PORT4
-	default ETRAX_SERIAL_PORT4_NO_DMA_IN
-	help
-	  What DMA channel to use for ser4.
-
-
-config ETRAX_SERIAL_PORT4_NO_DMA_IN
-	bool "Ser4 uses no DMA for input"
-	help
-	  Do not use DMA for ser4 input.
-
-config ETRAX_SERIAL_PORT4_DMA9_IN
-	bool "Ser4 uses DMA9 for input"
-	depends on ETRAX_SERIAL_PORT4
-	help
-	  Enables the DMA9 input channel for ser4 (ttyS4).
-	  If you do not enable DMA, an interrupt for each character will be
-	  used when receiving data.
-	  Normally you want to use DMA, unless you use the DMA channel for
-	  something else.
-
-endchoice
-
-config ETRAX_SER4_DTR_BIT
-	string "Ser 4 DTR bit (empty = not used)"
-	depends on ETRAX_SERIAL_PORT4
-
-config ETRAX_SER4_RI_BIT
-	string "Ser 4 RI bit (empty = not used)"
-	depends on ETRAX_SERIAL_PORT4
-
-config ETRAX_SER4_DSR_BIT
-	string "Ser 4 DSR bit (empty = not used)"
-	depends on ETRAX_SERIAL_PORT4
-
-config ETRAX_SER4_CD_BIT
-	string "Ser 4 CD bit (empty = not used)"
-	depends on ETRAX_SERIAL_PORT4
-
 config ETRAX_SYNCHRONOUS_SERIAL
 	bool "Synchronous serial-port support"
 	depends on ETRAX_ARCH_V32
@@ -703,32 +408,6 @@ config ETRAX_SPI_SSER0
 	  want to build it as a module, which will be named spi_crisv32_sser.
 	  (You need to select MMC separately.)
 
-config ETRAX_SPI_SSER0_DMA
-	bool "DMA for SPI on sser0 enabled"
-	depends on ETRAX_SPI_SSER0
-	depends on !ETRAX_SERIAL_PORT1_DMA4_OUT && !ETRAX_SERIAL_PORT1_DMA5_IN
-	default y
-	help
-	  Say Y if using DMA (dma4/dma5) for SPI on synchronous serial port 0.
-
-config ETRAX_SPI_MMC_CD_SSER0_PIN
-	string "MMC/SD card detect pin for SPI on sser0"
-	depends on ETRAX_SPI_SSER0 && MMC_SPI
-	default "pd11"
-	help
-	  The pin to use for SD/MMC card detect.  This pin should be pulled up
-	  and grounded when a card is present.  If defined as " " (space), no
-	  pin is selected.  A card must then always be inserted for proper
-	  action.
-
-config ETRAX_SPI_MMC_WP_SSER0_PIN
-	string "MMC/SD card write-protect pin for SPI on sser0"
-	depends on ETRAX_SPI_SSER0 && MMC_SPI
-	default "pd10"
-	help
-	  The pin to use for the SD/MMC write-protect signal for a memory
-	  card.  If defined as " " (space), the card is considered writable.
-
 config ETRAX_SPI_SSER1
 	tristate "SPI using synchronous serial port 1 (sser1)"
 	depends on ETRAX_SPI_MMC
@@ -742,32 +421,6 @@ config ETRAX_SPI_SSER1
 	  want to build it as a module, which will be named spi_crisv32_sser.
 	  (You need to select MMC separately.)
 
-config ETRAX_SPI_SSER1_DMA
-	bool "DMA for SPI on sser1 enabled"
-	depends on ETRAX_SPI_SSER1 && !ETRAX_ETHERNET_IFACE1
-	depends on !ETRAX_SERIAL_PORT0_DMA6_OUT && !ETRAX_SERIAL_PORT0_DMA7_IN
-	default y
-	help
-	  Say Y if using DMA (dma6/dma7) for SPI on synchronous serial port 1.
-
-config ETRAX_SPI_MMC_CD_SSER1_PIN
-	string "MMC/SD card detect pin for SPI on sser1"
-	depends on ETRAX_SPI_SSER1 && MMC_SPI
-	default "pd12"
-	help
-	  The pin to use for SD/MMC card detect.  This pin should be pulled up
-	  and grounded when a card is present.  If defined as " " (space), no
-	  pin is selected.  A card must then always be inserted for proper
-	  action.
-
-config ETRAX_SPI_MMC_WP_SSER1_PIN
-	string "MMC/SD card write-protect pin for SPI on sser1"
-	depends on ETRAX_SPI_SSER1 && MMC_SPI
-	default "pd9"
-	help
-	  The pin to use for the SD/MMC write-protect signal for a memory
-	  card.  If defined as " " (space), the card is considered writable.
-
 config ETRAX_SPI_GPIO
 	tristate "Bitbanged SPI using gpio pins"
 	depends on ETRAX_SPI_MMC
@@ -782,51 +435,4 @@ config ETRAX_SPI_GPIO
 	  Say m to build it as a module, which will be called spi_crisv32_gpio.
 	  (You need to select MMC separately.)
 
-# The default match that of sser0, only because that's how it was tested.
-config ETRAX_SPI_CS_PIN
-	string "SPI chip select pin"
-	depends on ETRAX_SPI_GPIO
-	default "pc3"
-	help
-	  The pin to use for SPI chip select.
-
-config ETRAX_SPI_CLK_PIN
-	string "SPI clock pin"
-	depends on ETRAX_SPI_GPIO
-	default "pc1"
-	help
-	  The pin to use for the SPI clock.
-
-config ETRAX_SPI_DATAIN_PIN
-	string "SPI MISO (data in) pin"
-	depends on ETRAX_SPI_GPIO
-	default "pc16"
-	help
-	  The pin to use for SPI data in from the device.
-
-config ETRAX_SPI_DATAOUT_PIN
-	string "SPI MOSI (data out) pin"
-	depends on ETRAX_SPI_GPIO
-	default "pc0"
-	help
-	  The pin to use for SPI data out to the device.
-
-config ETRAX_SPI_MMC_CD_GPIO_PIN
-	string "MMC/SD card detect pin for SPI using gpio (space for none)"
-	depends on ETRAX_SPI_GPIO && MMC_SPI
-	default "pd11"
-	help
-	  The pin to use for SD/MMC card detect.  This pin should be pulled up
-	  and grounded when a card is present.  If defined as " " (space), no
-	  pin is selected.  A card must then always be inserted for proper
-	  action.
-
-config ETRAX_SPI_MMC_WP_GPIO_PIN
-	string "MMC/SD card write-protect pin for SPI using gpio (space for none)"
-	depends on ETRAX_SPI_GPIO && MMC_SPI
-	default "pd10"
-	help
-	  The pin to use for the SD/MMC write-protect signal for a memory
-	  card.  If defined as " " (space), the card is considered writable.
-
 endif
diff --git a/arch/cris/arch-v32/mach-a3/Kconfig b/arch/cris/arch-v32/mach-a3/Kconfig
index 7796aaf..8754727 100644
--- a/arch/cris/arch-v32/mach-a3/Kconfig
+++ b/arch/cris/arch-v32/mach-a3/Kconfig
@@ -15,10 +15,6 @@ config ETRAX_SERIAL_PORTS
        int
        default 5
 
-config ETRAX_DDR
-       bool
-       default y
-
 config ETRAX_DDR2_MRS
 	hex "DDR2 MRS"
 	default "0"
diff --git a/arch/cris/include/asm/processor.h b/arch/cris/include/asm/processor.h
index c0a29b9..15b815d 100644
--- a/arch/cris/include/asm/processor.h
+++ b/arch/cris/include/asm/processor.h
@@ -47,7 +47,6 @@ struct task_struct;
  */
 
 #define task_pt_regs(task) user_regs(task_thread_info(task))
-#define current_regs() task_pt_regs(current)
 
 unsigned long get_wchan(struct task_struct *p);
 
diff --git a/arch/cris/include/uapi/asm/kvm_para.h b/arch/cris/include/uapi/asm/kvm_para.h
new file mode 100644
index 0000000..14fab8f
--- /dev/null
+++ b/arch/cris/include/uapi/asm/kvm_para.h
@@ -0,0 +1 @@
+#include <asm-generic/kvm_para.h>
diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c
index 73312ab..1790f22 100644
--- a/arch/cris/mm/fault.c
+++ b/arch/cris/mm/fault.c
@@ -58,8 +58,7 @@ do_page_fault(unsigned long address, struct pt_regs *regs,
 	struct vm_area_struct * vma;
 	siginfo_t info;
 	int fault;
-	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
-				((writeaccess & 1) ? FAULT_FLAG_WRITE : 0);
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
 
 	D(printk(KERN_DEBUG
 		 "Page fault for %lX on %X at %lX, prot %d write %d\n",
@@ -117,6 +116,8 @@ do_page_fault(unsigned long address, struct pt_regs *regs,
 	if (in_atomic() || !mm)
 		goto no_context;
 
+	if (user_mode(regs))
+		flags |= FAULT_FLAG_USER;
 retry:
 	down_read(&mm->mmap_sem);
 	vma = find_vma(mm, address);
@@ -155,6 +156,7 @@ retry:
 	} else if (writeaccess == 1) {
 		if (!(vma->vm_flags & VM_WRITE))
 			goto bad_area;
+		flags |= FAULT_FLAG_WRITE;
 	} else {
 		if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
 			goto bad_area;
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index 4b6628e..34aa193 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -5,7 +5,6 @@ config FRV
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_PERF_EVENTS
 	select HAVE_UID16
-	select HAVE_GENERIC_HARDIRQS
 	select VIRT_TO_BUS
 	select GENERIC_IRQ_SHOW
 	select HAVE_DEBUG_BUGVERBOSE
diff --git a/arch/frv/mb93090-mb00/pci-vdk.c b/arch/frv/mb93090-mb00/pci-vdk.c
index 0aa35f0..deb6784 100644
--- a/arch/frv/mb93090-mb00/pci-vdk.c
+++ b/arch/frv/mb93090-mb00/pci-vdk.c
@@ -320,7 +320,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
  *  are examined.
  */
 
-void __init pcibios_fixup_bus(struct pci_bus *bus)
+void pcibios_fixup_bus(struct pci_bus *bus)
 {
 #if 0
 	printk("### PCIBIOS_FIXUP_BUS(%d)\n",bus->number);
diff --git a/arch/frv/mm/fault.c b/arch/frv/mm/fault.c
index 331c1e2..9a66372 100644
--- a/arch/frv/mm/fault.c
+++ b/arch/frv/mm/fault.c
@@ -34,11 +34,11 @@ asmlinkage void do_page_fault(int datammu, unsigned long esr0, unsigned long ear
 	struct vm_area_struct *vma;
 	struct mm_struct *mm;
 	unsigned long _pme, lrai, lrad, fixup;
+	unsigned long flags = 0;
 	siginfo_t info;
 	pgd_t *pge;
 	pud_t *pue;
 	pte_t *pte;
-	int write;
 	int fault;
 
 #if 0
@@ -81,6 +81,9 @@ asmlinkage void do_page_fault(int datammu, unsigned long esr0, unsigned long ear
 	if (in_atomic() || !mm)
 		goto no_context;
 
+	if (user_mode(__frame))
+		flags |= FAULT_FLAG_USER;
+
 	down_read(&mm->mmap_sem);
 
 	vma = find_vma(mm, ear0);
@@ -129,7 +132,6 @@ asmlinkage void do_page_fault(int datammu, unsigned long esr0, unsigned long ear
  */
  good_area:
 	info.si_code = SEGV_ACCERR;
-	write = 0;
 	switch (esr0 & ESR0_ATXC) {
 	default:
 		/* handle write to write protected page */
@@ -140,7 +142,7 @@ asmlinkage void do_page_fault(int datammu, unsigned long esr0, unsigned long ear
 #endif
 		if (!(vma->vm_flags & VM_WRITE))
 			goto bad_area;
-		write = 1;
+		flags |= FAULT_FLAG_WRITE;
 		break;
 
 		 /* handle read from protected page */
@@ -162,7 +164,7 @@ asmlinkage void do_page_fault(int datammu, unsigned long esr0, unsigned long ear
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault.
 	 */
-	fault = handle_mm_fault(mm, vma, ear0, write ? FAULT_FLAG_WRITE : 0);
+	fault = handle_mm_fault(mm, vma, ear0, flags);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index 3d6759e..24b1dc2 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -2,7 +2,6 @@ config H8300
 	bool
 	default y
 	select HAVE_IDE
-	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_ATOMIC64
 	select HAVE_UID16
 	select VIRT_TO_BUS
diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig
index 77d442a..99041b0 100644
--- a/arch/hexagon/Kconfig
+++ b/arch/hexagon/Kconfig
@@ -15,7 +15,6 @@ config HEXAGON
 	# select GENERIC_PENDING_IRQ if SMP
 	select GENERIC_ATOMIC64
 	select HAVE_PERF_EVENTS
-	select HAVE_GENERIC_HARDIRQS
 	# GENERIC_ALLOCATOR is used by dma_alloc_coherent()
 	select GENERIC_ALLOCATOR
 	select GENERIC_IRQ_SHOW
diff --git a/arch/hexagon/mm/vm_fault.c b/arch/hexagon/mm/vm_fault.c
index 1bd276d..8704c93 100644
--- a/arch/hexagon/mm/vm_fault.c
+++ b/arch/hexagon/mm/vm_fault.c
@@ -53,8 +53,7 @@ void do_page_fault(unsigned long address, long cause, struct pt_regs *regs)
 	int si_code = SEGV_MAPERR;
 	int fault;
 	const struct exception_table_entry *fixup;
-	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
-				 (cause > 0 ? FAULT_FLAG_WRITE : 0);
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
 
 	/*
 	 * If we're in an interrupt or have no user context,
@@ -65,6 +64,8 @@ void do_page_fault(unsigned long address, long cause, struct pt_regs *regs)
 
 	local_irq_enable();
 
+	if (user_mode(regs))
+		flags |= FAULT_FLAG_USER;
 retry:
 	down_read(&mm->mmap_sem);
 	vma = find_vma(mm, address);
@@ -96,6 +97,7 @@ good_area:
 	case FLT_STORE:
 		if (!(vma->vm_flags & VM_WRITE))
 			goto bad_area;
+		flags |= FAULT_FLAG_WRITE;
 		break;
 	}
 
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 5a768ad..7740ab1 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -9,7 +9,6 @@ config IA64
 	select PCI if (!IA64_HP_SIM)
 	select ACPI if (!IA64_HP_SIM)
 	select PM if (!IA64_HP_SIM)
-	select ARCH_SUPPORTS_MSI
 	select HAVE_UNSTABLE_SCHED_CLOCK
 	select HAVE_IDE
 	select HAVE_OPROFILE
@@ -22,7 +21,6 @@ config IA64
 	select HAVE_KVM
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_DMA_API_DEBUG
-	select HAVE_GENERIC_HARDIRQS
 	select HAVE_MEMBLOCK
 	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_VIRT_CPU_ACCOUNTING
@@ -43,6 +41,7 @@ config IA64
 	select SYSCTL_ARCH_UNALIGN_NO_WARN
 	select HAVE_MOD_ARCH_SPECIFIC
 	select MODULES_USE_ELF_RELA
+	select ARCH_USE_CMPXCHG_LOCKREF
 	default y
 	help
 	  The Itanium Processor Family is Intel's 64-bit successor to
@@ -565,9 +564,9 @@ config KEXEC
 
 	  It is an ongoing process to be certain the hardware in a machine
 	  is properly shutdown, so do not be surprised if this code does not
-	  initially work for you.  It may help to enable device hotplugging
-	  support.  As of this writing the exact hardware interface is
-	  strongly in flux, so no good recommendation can be made.
+	  initially work for you.  As of this writing the exact hardware
+	  interface is strongly in flux, so no good recommendation can be
+	  made.
 
 config CRASH_DUMP
 	  bool "kernel crash dumps"
diff --git a/arch/ia64/include/asm/Kbuild b/arch/ia64/include/asm/Kbuild
index 05b03ec..a3456f3 100644
--- a/arch/ia64/include/asm/Kbuild
+++ b/arch/ia64/include/asm/Kbuild
@@ -3,3 +3,4 @@ generic-y += clkdev.h
 generic-y += exec.h
 generic-y += kvm_para.h
 generic-y += trace_clock.h
+generic-y += vtime.h
\ No newline at end of file
diff --git a/arch/ia64/include/asm/bitops.h b/arch/ia64/include/asm/bitops.h
index 8e20bff..c27eccd 100644
--- a/arch/ia64/include/asm/bitops.h
+++ b/arch/ia64/include/asm/bitops.h
@@ -425,13 +425,7 @@ __fls (unsigned long x)
 
 #include <asm-generic/bitops/fls64.h>
 
-/*
- * ffs: find first bit set. This is defined the same way as the libc and
- * compiler builtin ffs routines, therefore differs in spirit from the above
- * ffz (man ffs): it operates on "int" values only and the result value is the
- * bit number + 1.  ffs(0) is defined to return zero.
- */
-#define ffs(x)	__builtin_ffs(x)
+#include <asm-generic/bitops/builtin-ffs.h>
 
 /*
  * hweightN: returns the hamming weight (i.e. the number
diff --git a/arch/ia64/include/asm/dmi.h b/arch/ia64/include/asm/dmi.h
index 1ed4c8f..185d3d1 100644
--- a/arch/ia64/include/asm/dmi.h
+++ b/arch/ia64/include/asm/dmi.h
@@ -7,6 +7,6 @@
 /* Use normal IO mappings for DMI */
 #define dmi_ioremap ioremap
 #define dmi_iounmap(x,l) iounmap(x)
-#define dmi_alloc(l) kmalloc(l, GFP_ATOMIC)
+#define dmi_alloc(l) kzalloc(l, GFP_ATOMIC)
 
 #endif
diff --git a/arch/ia64/include/asm/spinlock.h b/arch/ia64/include/asm/spinlock.h
index 54ff557..45698cd 100644
--- a/arch/ia64/include/asm/spinlock.h
+++ b/arch/ia64/include/asm/spinlock.h
@@ -102,6 +102,11 @@ static inline int __ticket_spin_is_contended(arch_spinlock_t *lock)
 	return ((tmp - (tmp >> TICKET_SHIFT)) & TICKET_MASK) > 1;
 }
 
+static __always_inline int arch_spin_value_unlocked(arch_spinlock_t lock)
+{
+	return !(((lock.lock >> TICKET_SHIFT) ^ lock.lock) & TICKET_MASK);
+}
+
 static inline int arch_spin_is_locked(arch_spinlock_t *lock)
 {
 	return __ticket_spin_is_locked(lock);
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 5b2dc0d..bdfd878 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -1560,6 +1560,10 @@ int kvm_arch_create_memslot(struct kvm_memory_slot *slot, unsigned long npages)
 	return 0;
 }
 
+void kvm_arch_memslots_updated(struct kvm *kvm)
+{
+}
+
 int kvm_arch_prepare_memory_region(struct kvm *kvm,
 		struct kvm_memory_slot *memslot,
 		struct kvm_userspace_memory_region *mem,
diff --git a/arch/ia64/mm/fault.c b/arch/ia64/mm/fault.c
index 6cf0341..7225dad 100644
--- a/arch/ia64/mm/fault.c
+++ b/arch/ia64/mm/fault.c
@@ -90,8 +90,6 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re
 	mask = ((((isr >> IA64_ISR_X_BIT) & 1UL) << VM_EXEC_BIT)
 		| (((isr >> IA64_ISR_W_BIT) & 1UL) << VM_WRITE_BIT));
 
-	flags |= ((mask & VM_WRITE) ? FAULT_FLAG_WRITE : 0);
-
 	/* mmap_sem is performance critical.... */
 	prefetchw(&mm->mmap_sem);
 
@@ -119,6 +117,10 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re
 	if (notify_page_fault(regs, TRAP_BRKPT))
 		return;
 
+	if (user_mode(regs))
+		flags |= FAULT_FLAG_USER;
+	if (mask & VM_WRITE)
+		flags |= FAULT_FLAG_WRITE;
 retry:
 	down_read(&mm->mmap_sem);
 
diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c
index 76069c1..68232db 100644
--- a/arch/ia64/mm/hugetlbpage.c
+++ b/arch/ia64/mm/hugetlbpage.c
@@ -114,6 +114,11 @@ int pud_huge(pud_t pud)
 	return 0;
 }
 
+int pmd_huge_support(void)
+{
+	return 0;
+}
+
 struct page *
 follow_huge_pmd(struct mm_struct *mm, unsigned long address, pmd_t *pmd, int write)
 {
diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
index 29a7ef4..75661fb 100644
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@@ -9,7 +9,6 @@ config M32R
 	select HAVE_KERNEL_LZMA
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select HAVE_DEBUG_BUGVERBOSE
-	select HAVE_GENERIC_HARDIRQS
 	select VIRT_TO_BUS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
diff --git a/arch/m32r/mm/fault.c b/arch/m32r/mm/fault.c
index 3cdfa9c..e9c6a80 100644
--- a/arch/m32r/mm/fault.c
+++ b/arch/m32r/mm/fault.c
@@ -78,7 +78,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code,
 	struct mm_struct *mm;
 	struct vm_area_struct * vma;
 	unsigned long page, addr;
-	int write;
+	unsigned long flags = 0;
 	int fault;
 	siginfo_t info;
 
@@ -117,6 +117,9 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code,
 	if (in_atomic() || !mm)
 		goto bad_area_nosemaphore;
 
+	if (error_code & ACE_USERMODE)
+		flags |= FAULT_FLAG_USER;
+
 	/* When running in the kernel we expect faults to occur only to
 	 * addresses in user space.  All other faults represent errors in the
 	 * kernel and should generate an OOPS.  Unfortunately, in the case of an
@@ -166,14 +169,13 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code,
  */
 good_area:
 	info.si_code = SEGV_ACCERR;
-	write = 0;
 	switch (error_code & (ACE_WRITE|ACE_PROTECTION)) {
 		default:	/* 3: write, present */
 			/* fall through */
 		case ACE_WRITE:	/* write, not present */
 			if (!(vma->vm_flags & VM_WRITE))
 				goto bad_area;
-			write++;
+			flags |= FAULT_FLAG_WRITE;
 			break;
 		case ACE_PROTECTION:	/* read, present */
 		case 0:		/* read, not present */
@@ -194,7 +196,7 @@ good_area:
 	 */
 	addr = (address & PAGE_MASK);
 	set_thread_fault_code(error_code);
-	fault = handle_mm_fault(mm, vma, addr, write ? FAULT_FLAG_WRITE : 0);
+	fault = handle_mm_fault(mm, vma, addr, flags);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 821170e..311a300 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -4,13 +4,13 @@ config M68K
 	select HAVE_IDE
 	select HAVE_AOUT if MMU
 	select HAVE_DEBUG_BUGVERBOSE
-	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_SHOW
 	select GENERIC_ATOMIC64
 	select HAVE_UID16
 	select VIRT_TO_BUS
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
 	select GENERIC_CPU_DEVICES
+	select GENERIC_IOMAP
 	select GENERIC_STRNCPY_FROM_USER if MMU
 	select GENERIC_STRNLEN_USER if MMU
 	select FPU if MMU
@@ -72,7 +72,6 @@ source "kernel/Kconfig.freezer"
 config MMU
 	bool "MMU-based Paged Memory Management Support"
 	default y
-	select GENERIC_IOMAP
 	help
 	  Select if you want MMU-based virtualised addressing space
 	  support by paged memory management. If unsure, say 'Y'.
diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
index b9ab0a6..61dc643 100644
--- a/arch/m68k/Kconfig.machine
+++ b/arch/m68k/Kconfig.machine
@@ -150,18 +150,6 @@ config XCOPILOT_BUGS
 	help
 	  Support the bugs of Xcopilot.
 
-config UC5272
-	bool "Arcturus Networks uC5272 dimm board support"
-	depends on M5272
-	help
-	  Support for the Arcturus Networks uC5272 dimm board.
-
-config UC5282
-	bool "Arcturus Networks uC5282 board support"
-	depends on M528x
-	help
-	  Support for the Arcturus Networks uC5282 dimm board.
-
 config UCSIMM
 	bool "uCsimm module support"
 	depends on M68EZ328
@@ -205,23 +193,15 @@ config UCQUICC
 	help
 	  Support for the Lineo uCquicc board.
 
-config ARNEWSH
-	bool
-
 config ARN5206
 	bool "Arnewsh 5206 board support"
 	depends on M5206
-	select ARNEWSH
 	help
 	  Support for the Arnewsh 5206 board.
 
-config FREESCALE
-	bool
-
 config M5206eC3
 	bool "Motorola M5206eC3 board support"
 	depends on M5206e
-	select FREESCALE
 	help
 	  Support for the Motorola M5206eC3 board.
 
@@ -231,88 +211,24 @@ config ELITE
 	help
 	  Support for the Motorola M5206eLITE board.
 
-config M5208EVB
-	bool "Freescale M5208EVB board support"
-	depends on M520x
-	select FREESCALE
-	help
-	  Support for the Freescale Coldfire M5208EVB.
-
 config M5235EVB
 	bool "Freescale M5235EVB support"
 	depends on M523x
-	select FREESCALE
 	help
 	  Support for the Freescale M5235EVB board.
 
 config M5249C3
 	bool "Motorola M5249C3 board support"
 	depends on M5249
-	select FREESCALE
 	help
 	  Support for the Motorola M5249C3 board.
 
-config M5271EVB
-	bool "Freescale (Motorola) M5271EVB board support"
-	depends on M5271
-	select FREESCALE
-	help
-	  Support for the Freescale (Motorola) M5271EVB board.
-
-config M5275EVB
-	bool "Freescale (Motorola) M5275EVB board support"
-	depends on M5275
-	select FREESCALE
-	help
-	  Support for the Freescale (Motorola) M5275EVB board.
-
 config M5272C3
 	bool "Motorola M5272C3 board support"
 	depends on M5272
-	select FREESCALE
 	help
 	  Support for the Motorola M5272C3 board.
 
-config senTec
-	bool
-
-config COBRA5272
-	bool "senTec COBRA5272 board support"
-	depends on M5272
-	select senTec
-	help
-	  Support for the senTec COBRA5272 board.
-
-config AVNET
-	bool
-
-config AVNET5282
-	bool "Avnet 5282 board support"
-	depends on M528x
-	select AVNET
-	help
-	  Support for the Avnet 5282 board.
-
-config M5282EVB
-	bool "Motorola M5282EVB board support"
-	depends on M528x
-	select FREESCALE
-	help
-	  Support for the Motorola M5282EVB board.
-
-config COBRA5282
-	bool "senTec COBRA5282 board support"
-	depends on M528x
-	select senTec
-	help
-	  Support for the senTec COBRA5282 board.
-
-config SOM5282EM
-	bool "EMAC.Inc SOM5282EM board support"
-	depends on M528x
-	help
-	  Support for the EMAC.Inc SOM5282EM module.
-
 config WILDFIRE
 	bool "Intec Automation Inc. WildFire board support"
 	depends on M528x
@@ -328,14 +244,12 @@ config WILDFIREMOD
 config ARN5307
 	bool "Arnewsh 5307 board support"
 	depends on M5307
-	select ARNEWSH
 	help
 	  Support for the Arnewsh 5307 board.
 
 config M5307C3
 	bool "Motorola M5307C3 board support"
 	depends on M5307
-	select FREESCALE
 	help
 	  Support for the Motorola M5307C3 board.
 
@@ -345,30 +259,9 @@ config SECUREEDGEMP3
 	help
 	  Support for the SnapGear SecureEdge/MP3 platform.
 
-config M5329EVB
-	bool "Freescale (Motorola) M5329EVB board support"
-	depends on M532x
-	select FREESCALE
-	help
-	  Support for the Freescale (Motorola) M5329EVB board.
-
-config COBRA5329
-	bool "senTec COBRA5329 board support"
-	depends on M532x
-	help
-	  Support for the senTec COBRA5329 board.
-
-config M5373EVB
-	bool "Freescale M5373EVB board support"
-	depends on M537x
-	select FREESCALE
-	help
-	  Support for the Freescale M5373EVB board.
-
 config M5407C3
 	bool "Motorola M5407C3 board support"
 	depends on M5407
-	select FREESCALE
 	help
 	  Support for the Motorola M5407C3 board.
 
@@ -402,39 +295,12 @@ config NETtel
 	help
 	  Support for the SnapGear NETtel/SecureEdge/SnapGear boards.
 
-config SNAPGEAR
-	bool "SnapGear router board support"
-	depends on NETtel
-	help
-	  Special additional support for SnapGear router boards.
-
-config SNEHA
-	bool
-
-config CPU16B
-	bool "Sneha Technologies S.L. Sarasvati board support"
-	depends on M5272
-	select SNEHA
-	help
-	  Support for the SNEHA CPU16B board.
-
 config MOD5272
 	bool "Netburner MOD-5272 board support"
 	depends on M5272
 	help
 	  Support for the Netburner MOD-5272 board.
 
-config SAVANT
-	bool
-
-config SAVANTrosie1
-	bool "Savant Rosie1 board support"
-	depends on M523x
-	select SAVANT
-	help
-	  Support for the Savant Rosie1 board.
-
-
 if !MMU || COLDFIRE
 
 comment "Machine Options"
diff --git a/arch/m68k/amiga/platform.c b/arch/m68k/amiga/platform.c
index 6083088..dacd9f9 100644
--- a/arch/m68k/amiga/platform.c
+++ b/arch/m68k/amiga/platform.c
@@ -56,7 +56,7 @@ static int __init amiga_init_bus(void)
 	n = AMIGAHW_PRESENT(ZORRO3) ? 4 : 2;
 	pdev = platform_device_register_simple("amiga-zorro", -1,
 					       zorro_resources, n);
-	return PTR_RET(pdev);
+	return PTR_ERR_OR_ZERO(pdev);
 }
 
 subsys_initcall(amiga_init_bus);
diff --git a/arch/m68k/emu/natfeat.c b/arch/m68k/emu/natfeat.c
index fa277ae..121a666 100644
--- a/arch/m68k/emu/natfeat.c
+++ b/arch/m68k/emu/natfeat.c
@@ -18,11 +18,11 @@
 #include <asm/machdep.h>
 #include <asm/natfeat.h>
 
-extern long nf_get_id2(const char *feature_name);
+extern long nf_get_id_phys(unsigned long feature_name);
 
 asm("\n"
-"	.global nf_get_id2,nf_call\n"
-"nf_get_id2:\n"
+"	.global nf_get_id_phys,nf_call\n"
+"nf_get_id_phys:\n"
 "	.short	0x7300\n"
 "	rts\n"
 "nf_call:\n"
@@ -31,7 +31,7 @@ asm("\n"
 "1:	moveq.l	#0,%d0\n"
 "	rts\n"
 "	.section __ex_table,\"a\"\n"
-"	.long	nf_get_id2,1b\n"
+"	.long	nf_get_id_phys,1b\n"
 "	.long	nf_call,1b\n"
 "	.previous");
 EXPORT_SYMBOL_GPL(nf_call);
@@ -46,7 +46,7 @@ long nf_get_id(const char *feature_name)
 	if (n >= sizeof(name_copy))
 		return 0;
 
-	return nf_get_id2(name_copy);
+	return nf_get_id_phys(virt_to_phys(name_copy));
 }
 EXPORT_SYMBOL_GPL(nf_get_id);
 
@@ -58,7 +58,7 @@ void nfprint(const char *fmt, ...)
 
 	va_start(ap, fmt);
 	n = vsnprintf(buf, 256, fmt, ap);
-	nf_call(nf_get_id("NF_STDERR"), buf);
+	nf_call(nf_get_id("NF_STDERR"), virt_to_phys(buf));
 	va_end(ap);
 }
 
@@ -83,7 +83,7 @@ void nf_init(void)
 	id = nf_get_id("NF_NAME");
 	if (!id)
 		return;
-	nf_call(id, buf, 256);
+	nf_call(id, virt_to_phys(buf), 256);
 	buf[255] = 0;
 
 	pr_info("NatFeats found (%s, %lu.%lu)\n", buf, version >> 16,
diff --git a/arch/m68k/emu/nfblock.c b/arch/m68k/emu/nfblock.c
index e301133..0721858 100644
--- a/arch/m68k/emu/nfblock.c
+++ b/arch/m68k/emu/nfblock.c
@@ -41,8 +41,8 @@ static inline s32 nfhd_read_write(u32 major, u32 minor, u32 rwflag, u32 recno,
 static inline s32 nfhd_get_capacity(u32 major, u32 minor, u32 *blocks,
 				    u32 *blocksize)
 {
-	return nf_call(nfhd_id + NFHD_GET_CAPACITY, major, minor, blocks,
-		       blocksize);
+	return nf_call(nfhd_id + NFHD_GET_CAPACITY, major, minor,
+		       virt_to_phys(blocks), virt_to_phys(blocksize));
 }
 
 static LIST_HEAD(nfhd_list);
diff --git a/arch/m68k/emu/nfcon.c b/arch/m68k/emu/nfcon.c
index 6685bf4..57e8c8f 100644
--- a/arch/m68k/emu/nfcon.c
+++ b/arch/m68k/emu/nfcon.c
@@ -15,6 +15,7 @@
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/uaccess.h>
+#include <linux/io.h>
 
 #include <asm/natfeat.h>
 
@@ -25,17 +26,18 @@ static struct tty_driver *nfcon_tty_driver;
 static void nfputs(const char *str, unsigned int count)
 {
 	char buf[68];
+	unsigned long phys = virt_to_phys(buf);
 
 	buf[64] = 0;
 	while (count > 64) {
 		memcpy(buf, str, 64);
-		nf_call(stderr_id, buf);
+		nf_call(stderr_id, phys);
 		str += 64;
 		count -= 64;
 	}
 	memcpy(buf, str, count);
 	buf[count] = 0;
-	nf_call(stderr_id, buf);
+	nf_call(stderr_id, phys);
 }
 
 static void nfcon_write(struct console *con, const char *str,
@@ -79,7 +81,7 @@ static int nfcon_tty_put_char(struct tty_struct *tty, unsigned char ch)
 {
 	char temp[2] = { ch, 0 };
 
-	nf_call(stderr_id, temp);
+	nf_call(stderr_id, virt_to_phys(temp));
 	return 1;
 }
 
diff --git a/arch/m68k/emu/nfeth.c b/arch/m68k/emu/nfeth.c
index 695cd73..a0985fd 100644
--- a/arch/m68k/emu/nfeth.c
+++ b/arch/m68k/emu/nfeth.c
@@ -195,7 +195,8 @@ static struct net_device * __init nfeth_probe(int unit)
 	char mac[ETH_ALEN], host_ip[32], local_ip[32];
 	int err;
 
-	if (!nf_call(nfEtherID + XIF_GET_MAC, unit, mac, ETH_ALEN))
+	if (!nf_call(nfEtherID + XIF_GET_MAC, unit, virt_to_phys(mac),
+		     ETH_ALEN))
 		return NULL;
 
 	dev = alloc_etherdev(sizeof(struct nfeth_private));
@@ -217,9 +218,9 @@ static struct net_device * __init nfeth_probe(int unit)
 	}
 
 	nf_call(nfEtherID + XIF_GET_IPHOST, unit,
-		host_ip, sizeof(host_ip));
+		virt_to_phys(host_ip), sizeof(host_ip));
 	nf_call(nfEtherID + XIF_GET_IPATARI, unit,
-		local_ip, sizeof(local_ip));
+		virt_to_phys(local_ip), sizeof(local_ip));
 
 	netdev_info(dev, KBUILD_MODNAME " addr:%s (%s) HWaddr:%pM\n", host_ip,
 		    local_ip, mac);
diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h
index 353bf75..e153478 100644
--- a/arch/m68k/include/asm/io_no.h
+++ b/arch/m68k/include/asm/io_no.h
@@ -4,6 +4,7 @@
 #ifdef __KERNEL__
 
 #include <asm/virtconvert.h>
+#include <asm-generic/iomap.h>
 
 /*
  * These are for ISA/PCI shared memory _only_ and should never be used
diff --git a/arch/m68k/include/asm/irqflags.h b/arch/m68k/include/asm/irqflags.h
index 7ef4115..a823cd7 100644
--- a/arch/m68k/include/asm/irqflags.h
+++ b/arch/m68k/include/asm/irqflags.h
@@ -3,7 +3,7 @@
 
 #include <linux/types.h>
 #ifdef CONFIG_MMU
-#include <linux/hardirq.h>
+#include <linux/preempt_mask.h>
 #endif
 #include <linux/preempt.h>
 #include <asm/thread_info.h>
@@ -67,6 +67,10 @@ static inline void arch_local_irq_restore(unsigned long flags)
 
 static inline bool arch_irqs_disabled_flags(unsigned long flags)
 {
+	if (MACH_IS_ATARI) {
+		/* Ignore HSYNC = ipl 2 on Atari */
+		return (flags & ~(ALLOWINT | 0x200)) != 0;
+	}
 	return (flags & ~ALLOWINT) != 0;
 }
 
diff --git a/arch/m68k/include/asm/page.h b/arch/m68k/include/asm/page.h
index 7c360da..38b024a 100644
--- a/arch/m68k/include/asm/page.h
+++ b/arch/m68k/include/asm/page.h
@@ -48,6 +48,9 @@ extern unsigned long _ramend;
 #include <asm/page_no.h>
 #endif
 
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
 #include <asm-generic/getorder.h>
 
 #endif /* _M68K_PAGE_H */
diff --git a/arch/m68k/include/asm/page_mm.h b/arch/m68k/include/asm/page_mm.h
index 89f2014..5029f73 100644
--- a/arch/m68k/include/asm/page_mm.h
+++ b/arch/m68k/include/asm/page_mm.h
@@ -173,7 +173,4 @@ static inline __attribute_const__ int __virt_to_node_shift(void)
 
 #endif /* __ASSEMBLY__ */
 
-#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
-				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
 #endif /* _M68K_PAGE_MM_H */
diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c
index 911ba47..5b16f5d 100644
--- a/arch/m68k/kernel/setup_no.c
+++ b/arch/m68k/kernel/setup_no.c
@@ -118,7 +118,7 @@ void (*mach_power_off)(void);
  *
  * Returns:
  */
-void parse_uboot_commandline(char *commandp, int size)
+static void __init parse_uboot_commandline(char *commandp, int size)
 {
 	extern unsigned long _init_sp;
 	unsigned long *sp;
diff --git a/arch/m68k/kernel/signal.c b/arch/m68k/kernel/signal.c
index 2a16df3..57fd286 100644
--- a/arch/m68k/kernel/signal.c
+++ b/arch/m68k/kernel/signal.c
@@ -50,6 +50,7 @@
 #include <asm/pgtable.h>
 #include <asm/traps.h>
 #include <asm/ucontext.h>
+#include <asm/cacheflush.h>
 
 #ifdef CONFIG_MMU
 
@@ -181,6 +182,13 @@ static inline void push_cache (unsigned long vaddr)
 		asm volatile ("movec %0,%%caar\n\t"
 			      "movec %1,%%cacr"
 			      : : "r" (vaddr + 4), "r" (temp));
+	} else {
+		/* CPU_IS_COLDFIRE */
+#if defined(CONFIG_CACHE_COPYBACK)
+		flush_cf_dcache(0, DCACHE_MAX_ADDR);
+#endif
+		/* Invalidate instruction cache for the pushed bytes */
+		clear_cf_icache(vaddr, vaddr + 8);
 	}
 }
 
diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c
index bea6bcf..7eb9792 100644
--- a/arch/m68k/kernel/time.c
+++ b/arch/m68k/kernel/time.c
@@ -90,7 +90,7 @@ static int __init rtc_init(void)
 		return -ENODEV;
 
 	pdev = platform_device_register_simple("rtc-generic", -1, NULL, 0);
-	return PTR_RET(pdev);
+	return PTR_ERR_OR_ZERO(pdev);
 }
 
 module_init(rtc_init);
diff --git a/arch/m68k/mm/fault.c b/arch/m68k/mm/fault.c
index a563727..eb1d61f 100644
--- a/arch/m68k/mm/fault.c
+++ b/arch/m68k/mm/fault.c
@@ -88,6 +88,8 @@ int do_page_fault(struct pt_regs *regs, unsigned long address,
 	if (in_atomic() || !mm)
 		goto no_context;
 
+	if (user_mode(regs))
+		flags |= FAULT_FLAG_USER;
 retry:
 	down_read(&mm->mmap_sem);
 
diff --git a/arch/m68k/platform/68000/m68328.c b/arch/m68k/platform/68000/m68328.c
index a86eb66..e53caf4 100644
--- a/arch/m68k/platform/68000/m68328.c
+++ b/arch/m68k/platform/68000/m68328.c
@@ -15,6 +15,7 @@
 
 /***************************************************************************/
 
+#include <linux/init.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/rtc.h>
@@ -42,7 +43,7 @@ void m68328_reset (void)
 
 /***************************************************************************/
 
-void config_BSP(char *command, int len)
+void __init config_BSP(char *command, int len)
 {
   printk(KERN_INFO "\n68328 support D. Jeff Dionne <jeff@uclinux.org>\n");
   printk(KERN_INFO "68328 support Kenneth Albanowski <kjahds@kjshds.com>\n");
diff --git a/arch/m68k/platform/68000/m68EZ328.c b/arch/m68k/platform/68000/m68EZ328.c
index a6eb72d..332b5e8 100644
--- a/arch/m68k/platform/68000/m68EZ328.c
+++ b/arch/m68k/platform/68000/m68EZ328.c
@@ -13,6 +13,7 @@
 
 /***************************************************************************/
 
+#include <linux/init.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/rtc.h>
@@ -52,7 +53,7 @@ _bsc1(unsigned char *, gethwaddr, int, a)
 _bsc1(char *, getbenv, char *, a)
 #endif
 
-void config_BSP(char *command, int len)
+void __init config_BSP(char *command, int len)
 {
   unsigned char *p;
 
diff --git a/arch/m68k/platform/68000/m68VZ328.c b/arch/m68k/platform/68000/m68VZ328.c
index eb6964f..fd66583 100644
--- a/arch/m68k/platform/68000/m68VZ328.c
+++ b/arch/m68k/platform/68000/m68VZ328.c
@@ -14,6 +14,7 @@
 
 /***************************************************************************/
 
+#include <linux/init.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/kd.h>
@@ -59,7 +60,7 @@ static void m68vz328_reset(void)
 	);
 }
 
-static void init_hardware(char *command, int size)
+static void __init init_hardware(char *command, int size)
 {
 #ifdef CONFIG_DIRECT_IO_ACCESS
 	SCR = 0x10;					/* allow user access to internal registers */
@@ -145,7 +146,7 @@ _bsc0(char *, getserialnum)
 _bsc1(unsigned char *, gethwaddr, int, a)
 _bsc1(char *, getbenv, char *, a)
 
-static void init_hardware(char *command, int size)
+static void __init init_hardware(char *command, int size)
 {
 	char *p;
 
@@ -167,7 +168,7 @@ static void m68vz328_reset(void)
 {
 }
 
-static void init_hardware(char *command, int size)
+static void __init init_hardware(char *command, int size)
 {
 }
 
@@ -175,7 +176,7 @@ static void init_hardware(char *command, int size)
 #endif
 /***************************************************************************/
 
-void config_BSP(char *command, int size)
+void __init config_BSP(char *command, int size)
 {
 	printk(KERN_INFO "68VZ328 DragonBallVZ support (c) 2001 Lineo, Inc.\n");
 
diff --git a/arch/m68k/platform/68360/commproc.c b/arch/m68k/platform/68360/commproc.c
index 8e4e10c..315727b 100644
--- a/arch/m68k/platform/68360/commproc.c
+++ b/arch/m68k/platform/68360/commproc.c
@@ -31,6 +31,7 @@
  */
 
 #include <linux/errno.h>
+#include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
 #include <linux/param.h>
@@ -77,7 +78,7 @@ void m360_cpm_reset(void);
 
 
 
-void m360_cpm_reset()
+void __init m360_cpm_reset()
 {
 /* 	pte_t		   *pte; */
 
diff --git a/arch/m68k/platform/68360/config.c b/arch/m68k/platform/68360/config.c
index fae263e..d493ac4 100644
--- a/arch/m68k/platform/68360/config.c
+++ b/arch/m68k/platform/68360/config.c
@@ -11,6 +11,7 @@
  */
 
 #include <stdarg.h>
+#include <linux/init.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
@@ -140,7 +141,7 @@ _bsc1(char *, getbenv, char *, a)
 #endif
 
 
-void config_BSP(char *command, int len)
+void __init config_BSP(char *command, int len)
 {
   unsigned char *p;
 
diff --git a/arch/m68k/platform/coldfire/pci.c b/arch/m68k/platform/coldfire/pci.c
index b33f97a..df96792 100644
--- a/arch/m68k/platform/coldfire/pci.c
+++ b/arch/m68k/platform/coldfire/pci.c
@@ -319,7 +319,6 @@ static int __init mcf_pci_init(void)
 	pci_fixup_irqs(pci_common_swizzle, mcf_pci_map_irq);
 	pci_bus_size_bridges(rootbus);
 	pci_bus_assign_resources(rootbus);
-	pci_enable_bridges(rootbus);
 	return 0;
 }
 
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index 658542b..078bb74 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -338,6 +338,6 @@ static __init int q40_add_kbd_device(void)
 		return -ENODEV;
 
 	pdev = platform_device_register_simple("q40kbd", -1, NULL, 0);
-	return PTR_RET(pdev);
+	return PTR_ERR_OR_ZERO(pdev);
 }
 arch_initcall(q40_add_kbd_device);
diff --git a/arch/metag/Kconfig b/arch/metag/Kconfig
index cfd831c..36368eb 100644
--- a/arch/metag/Kconfig
+++ b/arch/metag/Kconfig
@@ -13,7 +13,6 @@ config METAG
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
-	select HAVE_GENERIC_HARDIRQS
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZO
diff --git a/arch/metag/Kconfig.soc b/arch/metag/Kconfig.soc
index 2a3c860..973640f 100644
--- a/arch/metag/Kconfig.soc
+++ b/arch/metag/Kconfig.soc
@@ -16,6 +16,8 @@ config META21_FPGA
 
 config SOC_TZ1090
 	bool "Toumaz Xenif TZ1090 SoC (Comet)"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select IMGPDC_IRQ
 	select METAG_LNKGET_AROUND_CACHE
 	select METAG_META21
 	select METAG_SMP_WRITE_REORDERING
diff --git a/arch/metag/boot/dts/tz1090.dtsi b/arch/metag/boot/dts/tz1090.dtsi
index 8537446..24ea7d2 100644
--- a/arch/metag/boot/dts/tz1090.dtsi
+++ b/arch/metag/boot/dts/tz1090.dtsi
@@ -8,6 +8,8 @@
 
 #include "skeleton.dtsi"
 
+#include <dt-bindings/interrupt-controller/irq.h>
+
 / {
 	compatible = "toumaz,tz1090", "img,meta";
 
@@ -26,6 +28,22 @@
 		#size-cells = <1>;
 		ranges;
 
+		pdc: pdc@0x02006000 {
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			reg = <0x02006000 0x1000>;
+			compatible = "img,pdc-intc";
+
+			num-perips = <3>;
+			num-syswakes = <3>;
+
+			interrupts = <18 IRQ_TYPE_LEVEL_HIGH>, /* Syswakes */
+			             <30 IRQ_TYPE_LEVEL_HIGH>, /* Perip 0 (RTC) */
+			             <29 IRQ_TYPE_LEVEL_HIGH>, /* Perip 1 (IR) */
+			             <31 IRQ_TYPE_LEVEL_HIGH>; /* Perip 2 (WDT) */
+		};
+
 		pinctrl: pinctrl@02005800 {
 			#gpio-range-cells = <3>;
 			compatible = "img,tz1090-pinctrl";
@@ -37,5 +55,54 @@
 			compatible = "img,tz1090-pdc-pinctrl";
 			reg = <0x02006500 0x100>;
 		};
+
+		gpios: gpios@02005800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "img,tz1090-gpio";
+			reg = <0x02005800 0x90>;
+
+			gpios0: bank@0 {
+				gpio-controller;
+				interrupt-controller;
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				reg = <0>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-ranges = <&pinctrl 0 0 30>;
+			};
+			gpios1: bank@1 {
+				gpio-controller;
+				interrupt-controller;
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				reg = <1>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-ranges = <&pinctrl 0 30 30>;
+			};
+			gpios2: bank@2 {
+				gpio-controller;
+				interrupt-controller;
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				reg = <2>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-ranges = <&pinctrl 0 60 30>;
+			};
+		};
+
+		pdc_gpios: gpios@02006500 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			compatible = "img,tz1090-pdc-gpio";
+			reg = <0x02006500 0x100>;
+
+			interrupt-parent = <&pdc>;
+			interrupts =	<8  IRQ_TYPE_NONE>,
+					<9  IRQ_TYPE_NONE>,
+					<10 IRQ_TYPE_NONE>;
+			gpio-ranges = <&pdc_pinctrl 0 0 7>;
+		};
 	};
 };
diff --git a/arch/metag/mm/fault.c b/arch/metag/mm/fault.c
index 8fddf46..332680e 100644
--- a/arch/metag/mm/fault.c
+++ b/arch/metag/mm/fault.c
@@ -53,8 +53,7 @@ int do_page_fault(struct pt_regs *regs, unsigned long address,
 	struct vm_area_struct *vma, *prev_vma;
 	siginfo_t info;
 	int fault;
-	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
-				(write_access ? FAULT_FLAG_WRITE : 0);
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
 
 	tsk = current;
 
@@ -109,6 +108,8 @@ int do_page_fault(struct pt_regs *regs, unsigned long address,
 	if (in_atomic() || !mm)
 		goto no_context;
 
+	if (user_mode(regs))
+		flags |= FAULT_FLAG_USER;
 retry:
 	down_read(&mm->mmap_sem);
 
@@ -121,6 +122,7 @@ good_area:
 	if (write_access) {
 		if (!(vma->vm_flags & VM_WRITE))
 			goto bad_area;
+		flags |= FAULT_FLAG_WRITE;
 	} else {
 		if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)))
 			goto bad_area;
diff --git a/arch/metag/mm/hugetlbpage.c b/arch/metag/mm/hugetlbpage.c
index 3c52fa6..0424315 100644
--- a/arch/metag/mm/hugetlbpage.c
+++ b/arch/metag/mm/hugetlbpage.c
@@ -110,6 +110,11 @@ int pud_huge(pud_t pud)
 	return 0;
 }
 
+int pmd_huge_support(void)
+{
+	return 1;
+}
+
 struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 			     pmd_t *pmd, int write)
 {
diff --git a/arch/metag/mm/init.c b/arch/metag/mm/init.c
index 28813f1..1239195 100644
--- a/arch/metag/mm/init.c
+++ b/arch/metag/mm/init.c
@@ -407,10 +407,9 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 #endif
 
 #ifdef CONFIG_OF_FLATTREE
-void __init early_init_dt_setup_initrd_arch(unsigned long start,
-					    unsigned long end)
+void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
 {
-	pr_err("%s(%lx, %lx)\n",
+	pr_err("%s(%llx, %llx)\n",
 	       __func__, start, end);
 }
 #endif /* CONFIG_OF_FLATTREE */
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 4fab522..b82f82b 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -18,7 +18,6 @@ config MICROBLAZE
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select HAVE_DEBUG_KMEMLEAK
 	select IRQ_DOMAIN
-	select HAVE_GENERIC_HARDIRQS
 	select VIRT_TO_BUS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
@@ -29,6 +28,7 @@ config MICROBLAZE
 	select GENERIC_IDLE_POLL_SETUP
 	select MODULES_USE_ELF_RELA
 	select CLONE_BACKWARDS3
+	select CLKSRC_OF
 
 config SWAP
 	def_bool n
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index 0a603d3..40350a3 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -72,7 +72,7 @@ all: linux.bin
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 
-linux.bin linux.bin.gz: vmlinux
+linux.bin linux.bin.gz linux.bin.ub: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
 simpleImage.%: vmlinux
@@ -81,6 +81,7 @@ simpleImage.%: vmlinux
 define archhelp
   echo '* linux.bin    - Create raw binary'
   echo '  linux.bin.gz - Create compressed raw binary'
+  echo '  linux.bin.ub - Create U-Boot wrapped raw binary'
   echo '  simpleImage.<dt> - ELF image with $(arch)/boot/dts/<dt>.dts linked in'
   echo '                   - stripped elf with fdt blob'
   echo '  simpleImage.<dt>.unstrip - full ELF image with fdt blob'
diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile
index 80fe54f..8e211cc 100644
--- a/arch/microblaze/boot/Makefile
+++ b/arch/microblaze/boot/Makefile
@@ -2,12 +2,15 @@
 # arch/microblaze/boot/Makefile
 #
 
-targets := linux.bin linux.bin.gz simpleImage.%
+targets := linux.bin linux.bin.gz linux.bin.ub simpleImage.%
 
 OBJCOPYFLAGS := -R .note -R .comment -R .note.gnu.build-id -O binary
 
 $(obj)/linux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
+	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
+
+$(obj)/linux.bin.ub: $(obj)/linux.bin FORCE
 	$(call if_changed,uimage)
 	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
 
@@ -22,8 +25,6 @@ quiet_cmd_strip = STRIP   $@
 	cmd_strip = $(STRIP) -K microblaze_start -K _end -K __log_buf \
 				-K _fdt_start vmlinux -o $@
 
-UIMAGE_IN = $@
-UIMAGE_OUT = $@.ub
 UIMAGE_LOADADDR = $(CONFIG_KERNEL_BASE_ADDR)
 
 $(obj)/simpleImage.%: vmlinux FORCE
diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
index 20c5e8e..9977816 100644
--- a/arch/microblaze/include/asm/prom.h
+++ b/arch/microblaze/include/asm/prom.h
@@ -50,9 +50,6 @@ void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
 
 extern void kdump_move_device_tree(void);
 
-/* CPU OF node matching */
-struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
-
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
 
diff --git a/arch/microblaze/include/asm/selfmod.h b/arch/microblaze/include/asm/selfmod.h
deleted file mode 100644
index c42aff2..0000000
--- a/arch/microblaze/include/asm/selfmod.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SELFMOD_H
-#define _ASM_MICROBLAZE_SELFMOD_H
-
-/*
- * BARRIER_BASE_ADDR is constant address for selfmod function.
- * do not change this value - selfmod function is in
- * arch/microblaze/kernel/selfmod.c: selfmod_function()
- *
- * last 16 bits is used for storing register offset
- */
-
-#define BARRIER_BASE_ADDR	0x1234ff00
-
-void selfmod_function(const int *arr_fce, const unsigned int base);
-
-#endif /* _ASM_MICROBLAZE_SELFMOD_H */
diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile
index 928c950..5b0e512 100644
--- a/arch/microblaze/kernel/Makefile
+++ b/arch/microblaze/kernel/Makefile
@@ -7,7 +7,6 @@ ifdef CONFIG_FUNCTION_TRACER
 CFLAGS_REMOVE_timer.o = -pg
 CFLAGS_REMOVE_intc.o = -pg
 CFLAGS_REMOVE_early_printk.o = -pg
-CFLAGS_REMOVE_selfmod.o = -pg
 CFLAGS_REMOVE_heartbeat.o = -pg
 CFLAGS_REMOVE_ftrace.o = -pg
 CFLAGS_REMOVE_process.o = -pg
@@ -23,7 +22,6 @@ obj-y += dma.o exceptions.o \
 obj-y += cpu/
 
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
-obj-$(CONFIG_SELFMOD)		+= selfmod.o
 obj-$(CONFIG_HEART_BEAT)	+= heartbeat.o
 obj-$(CONFIG_MODULES)		+= microblaze_ksyms.o module.o
 obj-$(CONFIG_MMU)		+= misc.o
diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c
index 410398f..c9203b1 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo.c
@@ -39,6 +39,8 @@ const struct cpu_ver_key cpu_ver_lookup[] = {
 	{"8.30.a", 0x17},
 	{"8.40.a", 0x18},
 	{"8.40.b", 0x19},
+	{"9.0", 0x1b},
+	{"9.1", 0x1d},
 	{NULL, 0},
 };
 
diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c
index d85fa3a..581451a 100644
--- a/arch/microblaze/kernel/intc.c
+++ b/arch/microblaze/kernel/intc.c
@@ -1,5 +1,6 @@
 /*
- * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2013 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2012-2013 Xilinx, Inc.
  * Copyright (C) 2007-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
@@ -8,23 +9,15 @@
  * for more details.
  */
 
-#include <linux/init.h>
 #include <linux/irqdomain.h>
 #include <linux/irq.h>
-#include <asm/page.h>
+#include <linux/of_address.h>
 #include <linux/io.h>
 #include <linux/bug.h>
 
-#include <asm/prom.h>
-#include <asm/irq.h>
+#include "../../drivers/irqchip/irqchip.h"
 
-#ifdef CONFIG_SELFMOD_INTC
-#include <asm/selfmod.h>
-#define INTC_BASE	BARRIER_BASE_ADDR
-#else
-static unsigned int intc_baseaddr;
-#define INTC_BASE	intc_baseaddr
-#endif
+static void __iomem *intc_baseaddr;
 
 /* No one else should require these constants, so define them locally here. */
 #define ISR 0x00			/* Interrupt Status Register */
@@ -50,21 +43,21 @@ static void intc_enable_or_unmask(struct irq_data *d)
 	 * acks the irq before calling the interrupt handler
 	 */
 	if (irqd_is_level_type(d))
-		out_be32(INTC_BASE + IAR, mask);
+		out_be32(intc_baseaddr + IAR, mask);
 
-	out_be32(INTC_BASE + SIE, mask);
+	out_be32(intc_baseaddr + SIE, mask);
 }
 
 static void intc_disable_or_mask(struct irq_data *d)
 {
 	pr_debug("disable: %ld\n", d->hwirq);
-	out_be32(INTC_BASE + CIE, 1 << d->hwirq);
+	out_be32(intc_baseaddr + CIE, 1 << d->hwirq);
 }
 
 static void intc_ack(struct irq_data *d)
 {
 	pr_debug("ack: %ld\n", d->hwirq);
-	out_be32(INTC_BASE + IAR, 1 << d->hwirq);
+	out_be32(intc_baseaddr + IAR, 1 << d->hwirq);
 }
 
 static void intc_mask_ack(struct irq_data *d)
@@ -72,8 +65,8 @@ static void intc_mask_ack(struct irq_data *d)
 	unsigned long mask = 1 << d->hwirq;
 
 	pr_debug("disable_and_ack: %ld\n", d->hwirq);
-	out_be32(INTC_BASE + CIE, mask);
-	out_be32(INTC_BASE + IAR, mask);
+	out_be32(intc_baseaddr + CIE, mask);
+	out_be32(intc_baseaddr + IAR, mask);
 }
 
 static struct irq_chip intc_dev = {
@@ -90,7 +83,7 @@ unsigned int get_irq(void)
 {
 	unsigned int hwirq, irq = -1;
 
-	hwirq = in_be32(INTC_BASE + IVR);
+	hwirq = in_be32(intc_baseaddr + IVR);
 	if (hwirq != -1U)
 		irq = irq_find_mapping(root_domain, hwirq);
 
@@ -120,40 +113,32 @@ static const struct irq_domain_ops xintc_irq_domain_ops = {
 	.map = xintc_map,
 };
 
-void __init init_IRQ(void)
+static int __init xilinx_intc_of_init(struct device_node *intc,
+					     struct device_node *parent)
 {
 	u32 nr_irq, intr_mask;
-	struct device_node *intc = NULL;
-#ifdef CONFIG_SELFMOD_INTC
-	unsigned int intc_baseaddr = 0;
-	static int arr_func[] = {
-				(int)&get_irq,
-				(int)&intc_enable_or_unmask,
-				(int)&intc_disable_or_mask,
-				(int)&intc_mask_ack,
-				(int)&intc_ack,
-				(int)&intc_end,
-				0
-			};
-#endif
-	intc = of_find_compatible_node(NULL, NULL, "xlnx,xps-intc-1.00.a");
-	BUG_ON(!intc);
-
-	intc_baseaddr = be32_to_cpup(of_get_property(intc, "reg", NULL));
-	intc_baseaddr = (unsigned long) ioremap(intc_baseaddr, PAGE_SIZE);
-	nr_irq = be32_to_cpup(of_get_property(intc,
-						"xlnx,num-intr-inputs", NULL));
-
-	intr_mask =
-		be32_to_cpup(of_get_property(intc, "xlnx,kind-of-intr", NULL));
+	int ret;
+
+	intc_baseaddr = of_iomap(intc, 0);
+	BUG_ON(!intc_baseaddr);
+
+	ret = of_property_read_u32(intc, "xlnx,num-intr-inputs", &nr_irq);
+	if (ret < 0) {
+		pr_err("%s: unable to read xlnx,num-intr-inputs\n", __func__);
+		return -EINVAL;
+	}
+
+	ret = of_property_read_u32(intc, "xlnx,kind-of-intr", &intr_mask);
+	if (ret < 0) {
+		pr_err("%s: unable to read xlnx,kind-of-intr\n", __func__);
+		return -EINVAL;
+	}
+
 	if (intr_mask > (u32)((1ULL << nr_irq) - 1))
 		pr_info(" ERROR: Mismatch in kind-of-intr param\n");
 
-#ifdef CONFIG_SELFMOD_INTC
-	selfmod_function((int *) arr_func, intc_baseaddr);
-#endif
-	pr_info("%s #0 at 0x%08x, num_irq=%d, edge=0x%x\n",
-		intc->name, intc_baseaddr, nr_irq, intr_mask);
+	pr_info("%s: num_irq=%d, edge=0x%x\n",
+		intc->full_name, nr_irq, intr_mask);
 
 	/*
 	 * Disable all external interrupts until they are
@@ -174,4 +159,8 @@ void __init init_IRQ(void)
 							(void *)intr_mask);
 
 	irq_set_default_host(root_domain);
+
+	return 0;
 }
+
+IRQCHIP_DECLARE(xilinx_intc, "xlnx,xps-intc-1.00.a", xilinx_intc_of_init);
diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c
index ace700a..11e24de 100644
--- a/arch/microblaze/kernel/irq.c
+++ b/arch/microblaze/kernel/irq.c
@@ -17,10 +17,8 @@
 #include <linux/seq_file.h>
 #include <linux/kernel_stat.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
 #include <linux/of_irq.h>
-#include <linux/export.h>
-
-#include <asm/prom.h>
 
 static u32 concurrent_irq;
 
@@ -47,3 +45,9 @@ next_irq:
 	set_irq_regs(old_regs);
 	trace_hardirqs_on();
 }
+
+void __init init_IRQ(void)
+{
+	/* process the entire interrupt tree in one go */
+	irqchip_init();
+}
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index 0a2c68f..0c4453f 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -46,11 +46,6 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 	memblock_add(base, size);
 }
 
-void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
-{
-	return __va(memblock_alloc(size, align));
-}
-
 #ifdef CONFIG_EARLY_PRINTK
 static char *stdout;
 
@@ -136,8 +131,7 @@ void __init early_init_devtree(void *params)
 }
 
 #ifdef CONFIG_BLK_DEV_INITRD
-void __init early_init_dt_setup_initrd_arch(unsigned long start,
-		unsigned long end)
+void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
 {
 	initrd_start = (unsigned long)__va(start);
 	initrd_end = (unsigned long)__va(end);
diff --git a/arch/microblaze/kernel/reset.c b/arch/microblaze/kernel/reset.c
index 2e5079a..fbe58c6 100644
--- a/arch/microblaze/kernel/reset.c
+++ b/arch/microblaze/kernel/reset.c
@@ -67,7 +67,11 @@ static void gpio_system_reset(void)
 		pr_notice("Reset GPIO unavailable - halting!\n");
 }
 #else
-#define gpio_system_reset() do {} while (0)
+static void gpio_system_reset(void)
+{
+	pr_notice("No reset GPIO present - halting!\n");
+}
+
 void of_platform_reset_gpio_probe(void)
 {
 	return;
diff --git a/arch/microblaze/kernel/selfmod.c b/arch/microblaze/kernel/selfmod.c
deleted file mode 100644
index 89508bd..0000000
--- a/arch/microblaze/kernel/selfmod.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2009 PetaLogix
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/interrupt.h>
-#include <asm/selfmod.h>
-
-#undef DEBUG
-
-#if __GNUC__ > 3
-#error GCC 4 unsupported SELFMOD. Please disable SELFMOD from menuconfig.
-#endif
-
-#define OPCODE_IMM		0xB0000000
-#define OPCODE_LWI		0xE8000000
-#define OPCODE_LWI_MASK		0xEC000000
-#define OPCODE_RTSD		0xB60F0008 /* return from func: rtsd r15, 8 */
-#define OPCODE_ADDIK		0x30000000
-#define OPCODE_ADDIK_MASK	0xFC000000
-
-#define IMM_BASE	(OPCODE_IMM | (BARRIER_BASE_ADDR >> 16))
-#define LWI_BASE	(OPCODE_LWI | (BARRIER_BASE_ADDR & 0x0000ff00))
-#define LWI_BASE_MASK	(OPCODE_LWI_MASK | (BARRIER_BASE_ADDR & 0x0000ff00))
-#define ADDIK_BASE	(OPCODE_ADDIK | (BARRIER_BASE_ADDR & 0x0000ff00))
-#define ADDIK_BASE_MASK	(OPCODE_ADDIK_MASK | (BARRIER_BASE_ADDR & 0x0000ff00))
-
-#define MODIFY_INSTR {						\
-	pr_debug("%s: curr instr, (%d):0x%x, next(%d):0x%x\n",		\
-		__func__, i, addr[i], i + 1, addr[i + 1]);		\
-	addr[i] = OPCODE_IMM + (base >> 16);				\
-	/* keep instruction opcode and add only last 16bits */		\
-	addr[i + 1] = (addr[i + 1] & 0xffff00ff) + (base & 0xffff);	\
-	__invalidate_icache(addr[i]);					\
-	__invalidate_icache(addr[i + 1]);				\
-	pr_debug("%s: hack instr, (%d):0x%x, next(%d):0x%x\n",		\
-		__func__, i, addr[i], i + 1, addr[i + 1]); }
-
-/* NOTE
- * self-modified part of code for improvement of interrupt controller
- * save instruction in interrupt rutine
- */
-void selfmod_function(const int *arr_fce, const unsigned int base)
-{
-	unsigned int flags, i, j, *addr = NULL;
-
-	local_irq_save(flags);
-	__disable_icache();
-
-	/* zero terminated array */
-	for (j = 0; arr_fce[j] != 0; j++) {
-		/* get start address of function */
-		addr = (unsigned int *) arr_fce[j];
-		pr_debug("%s: func(%d) at 0x%x\n",
-					__func__, j, (unsigned int) addr);
-		for (i = 0; ; i++) {
-			pr_debug("%s: instruction code at %d: 0x%x\n",
-						__func__, i, addr[i]);
-			if (addr[i] == IMM_BASE) {
-				/* detecting of lwi (0xE8) or swi (0xF8) instr
-				 * I can detect both opcode with one mask */
-				if ((addr[i + 1] & LWI_BASE_MASK) == LWI_BASE) {
-					MODIFY_INSTR;
-				} else /* detection addik for ack */
-				if ((addr[i + 1] & ADDIK_BASE_MASK) ==
-								ADDIK_BASE) {
-					MODIFY_INSTR;
-				}
-			} else if (addr[i] == OPCODE_RTSD) {
-				/* return from function means end of function */
-				pr_debug("%s: end of array %d\n", __func__, i);
-				break;
-			}
-		}
-	}
-	local_irq_restore(flags);
-} /* end of self-modified code */
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index 0263da7..0775e03 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -9,6 +9,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/clocksource.h>
 #include <linux/string.h>
 #include <linux/seq_file.h>
 #include <linux/cpu.h>
@@ -68,10 +69,6 @@ void __init setup_arch(char **cmdline_p)
 
 	xilinx_pci_init();
 
-#if defined(CONFIG_SELFMOD_INTC) || defined(CONFIG_SELFMOD_TIMER)
-	pr_notice("Self modified code enable\n");
-#endif
-
 #ifdef CONFIG_VT
 #if defined(CONFIG_XILINX_CONSOLE)
 	conswitchp = &xil_con;
@@ -196,6 +193,11 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
 	per_cpu(CURRENT_SAVE, 0) = (unsigned long)current;
 }
 
+void __init time_init(void)
+{
+	clocksource_of_init();
+}
+
 #ifdef CONFIG_DEBUG_FS
 struct dentry *of_debugfs_root;
 
diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
index aec5020..e4b3f33 100644
--- a/arch/microblaze/kernel/timer.c
+++ b/arch/microblaze/kernel/timer.c
@@ -1,5 +1,6 @@
 /*
- * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2013 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2012-2013 Xilinx, Inc.
  * Copyright (C) 2007-2009 PetaLogix
  * Copyright (C) 2006 Atmark Techno, Inc.
  *
@@ -8,34 +9,16 @@
  * for more details.
  */
 
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
 #include <linux/interrupt.h>
-#include <linux/profile.h>
-#include <linux/irq.h>
 #include <linux/delay.h>
 #include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/err.h>
 #include <linux/clk.h>
-#include <linux/clocksource.h>
 #include <linux/clockchips.h>
-#include <linux/io.h>
-#include <linux/bug.h>
+#include <linux/of_address.h>
 #include <asm/cpuinfo.h>
-#include <asm/setup.h>
-#include <asm/prom.h>
-#include <asm/irq.h>
 #include <linux/cnt32_to_63.h>
 
-#ifdef CONFIG_SELFMOD_TIMER
-#include <asm/selfmod.h>
-#define TIMER_BASE	BARRIER_BASE_ADDR
-#else
-static unsigned int timer_baseaddr;
-#define TIMER_BASE	timer_baseaddr
-#endif
+static void __iomem *timer_baseaddr;
 
 static unsigned int freq_div_hz;
 static unsigned int timer_clock_freq;
@@ -59,19 +42,21 @@ static unsigned int timer_clock_freq;
 #define TCSR_PWMA	(1<<9)
 #define TCSR_ENALL	(1<<10)
 
-static inline void microblaze_timer0_stop(void)
+static inline void xilinx_timer0_stop(void)
 {
-	out_be32(TIMER_BASE + TCSR0, in_be32(TIMER_BASE + TCSR0) & ~TCSR_ENT);
+	out_be32(timer_baseaddr + TCSR0,
+		 in_be32(timer_baseaddr + TCSR0) & ~TCSR_ENT);
 }
 
-static inline void microblaze_timer0_start_periodic(unsigned long load_val)
+static inline void xilinx_timer0_start_periodic(unsigned long load_val)
 {
 	if (!load_val)
 		load_val = 1;
-	out_be32(TIMER_BASE + TLR0, load_val); /* loading value to timer reg */
+	/* loading value to timer reg */
+	out_be32(timer_baseaddr + TLR0, load_val);
 
 	/* load the initial value */
-	out_be32(TIMER_BASE + TCSR0, TCSR_LOAD);
+	out_be32(timer_baseaddr + TCSR0, TCSR_LOAD);
 
 	/* see timer data sheet for detail
 	 * !ENALL - don't enable 'em all
@@ -86,38 +71,39 @@ static inline void microblaze_timer0_start_periodic(unsigned long load_val)
 	 * UDT - set the timer as down counter
 	 * !MDT0 - generate mode
 	 */
-	out_be32(TIMER_BASE + TCSR0,
+	out_be32(timer_baseaddr + TCSR0,
 			TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT);
 }
 
-static inline void microblaze_timer0_start_oneshot(unsigned long load_val)
+static inline void xilinx_timer0_start_oneshot(unsigned long load_val)
 {
 	if (!load_val)
 		load_val = 1;
-	out_be32(TIMER_BASE + TLR0, load_val); /* loading value to timer reg */
+	/* loading value to timer reg */
+	out_be32(timer_baseaddr + TLR0, load_val);
 
 	/* load the initial value */
-	out_be32(TIMER_BASE + TCSR0, TCSR_LOAD);
+	out_be32(timer_baseaddr + TCSR0, TCSR_LOAD);
 
-	out_be32(TIMER_BASE + TCSR0,
+	out_be32(timer_baseaddr + TCSR0,
 			TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT);
 }
 
-static int microblaze_timer_set_next_event(unsigned long delta,
+static int xilinx_timer_set_next_event(unsigned long delta,
 					struct clock_event_device *dev)
 {
 	pr_debug("%s: next event, delta %x\n", __func__, (u32)delta);
-	microblaze_timer0_start_oneshot(delta);
+	xilinx_timer0_start_oneshot(delta);
 	return 0;
 }
 
-static void microblaze_timer_set_mode(enum clock_event_mode mode,
+static void xilinx_timer_set_mode(enum clock_event_mode mode,
 				struct clock_event_device *evt)
 {
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
 		pr_info("%s: periodic\n", __func__);
-		microblaze_timer0_start_periodic(freq_div_hz);
+		xilinx_timer0_start_periodic(freq_div_hz);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
 		pr_info("%s: oneshot\n", __func__);
@@ -127,7 +113,7 @@ static void microblaze_timer_set_mode(enum clock_event_mode mode,
 		break;
 	case CLOCK_EVT_MODE_SHUTDOWN:
 		pr_info("%s: shutdown\n", __func__);
-		microblaze_timer0_stop();
+		xilinx_timer0_stop();
 		break;
 	case CLOCK_EVT_MODE_RESUME:
 		pr_info("%s: resume\n", __func__);
@@ -135,23 +121,23 @@ static void microblaze_timer_set_mode(enum clock_event_mode mode,
 	}
 }
 
-static struct clock_event_device clockevent_microblaze_timer = {
-	.name		= "microblaze_clockevent",
+static struct clock_event_device clockevent_xilinx_timer = {
+	.name		= "xilinx_clockevent",
 	.features       = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
 	.shift		= 8,
 	.rating		= 300,
-	.set_next_event	= microblaze_timer_set_next_event,
-	.set_mode	= microblaze_timer_set_mode,
+	.set_next_event	= xilinx_timer_set_next_event,
+	.set_mode	= xilinx_timer_set_mode,
 };
 
 static inline void timer_ack(void)
 {
-	out_be32(TIMER_BASE + TCSR0, in_be32(TIMER_BASE + TCSR0));
+	out_be32(timer_baseaddr + TCSR0, in_be32(timer_baseaddr + TCSR0));
 }
 
 static irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
-	struct clock_event_device *evt = &clockevent_microblaze_timer;
+	struct clock_event_device *evt = &clockevent_xilinx_timer;
 #ifdef CONFIG_HEART_BEAT
 	heartbeat();
 #endif
@@ -164,73 +150,74 @@ static struct irqaction timer_irqaction = {
 	.handler = timer_interrupt,
 	.flags = IRQF_DISABLED | IRQF_TIMER,
 	.name = "timer",
-	.dev_id = &clockevent_microblaze_timer,
+	.dev_id = &clockevent_xilinx_timer,
 };
 
-static __init void microblaze_clockevent_init(void)
+static __init void xilinx_clockevent_init(void)
 {
-	clockevent_microblaze_timer.mult =
+	clockevent_xilinx_timer.mult =
 		div_sc(timer_clock_freq, NSEC_PER_SEC,
-				clockevent_microblaze_timer.shift);
-	clockevent_microblaze_timer.max_delta_ns =
-		clockevent_delta2ns((u32)~0, &clockevent_microblaze_timer);
-	clockevent_microblaze_timer.min_delta_ns =
-		clockevent_delta2ns(1, &clockevent_microblaze_timer);
-	clockevent_microblaze_timer.cpumask = cpumask_of(0);
-	clockevents_register_device(&clockevent_microblaze_timer);
+				clockevent_xilinx_timer.shift);
+	clockevent_xilinx_timer.max_delta_ns =
+		clockevent_delta2ns((u32)~0, &clockevent_xilinx_timer);
+	clockevent_xilinx_timer.min_delta_ns =
+		clockevent_delta2ns(1, &clockevent_xilinx_timer);
+	clockevent_xilinx_timer.cpumask = cpumask_of(0);
+	clockevents_register_device(&clockevent_xilinx_timer);
 }
 
-static cycle_t microblaze_read(struct clocksource *cs)
+static cycle_t xilinx_read(struct clocksource *cs)
 {
 	/* reading actual value of timer 1 */
-	return (cycle_t) (in_be32(TIMER_BASE + TCR1));
+	return (cycle_t) (in_be32(timer_baseaddr + TCR1));
 }
 
-static struct timecounter microblaze_tc = {
+static struct timecounter xilinx_tc = {
 	.cc = NULL,
 };
 
-static cycle_t microblaze_cc_read(const struct cyclecounter *cc)
+static cycle_t xilinx_cc_read(const struct cyclecounter *cc)
 {
-	return microblaze_read(NULL);
+	return xilinx_read(NULL);
 }
 
-static struct cyclecounter microblaze_cc = {
-	.read = microblaze_cc_read,
+static struct cyclecounter xilinx_cc = {
+	.read = xilinx_cc_read,
 	.mask = CLOCKSOURCE_MASK(32),
 	.shift = 8,
 };
 
-static int __init init_microblaze_timecounter(void)
+static int __init init_xilinx_timecounter(void)
 {
-	microblaze_cc.mult = div_sc(timer_clock_freq, NSEC_PER_SEC,
-				microblaze_cc.shift);
+	xilinx_cc.mult = div_sc(timer_clock_freq, NSEC_PER_SEC,
+				xilinx_cc.shift);
 
-	timecounter_init(&microblaze_tc, &microblaze_cc, sched_clock());
+	timecounter_init(&xilinx_tc, &xilinx_cc, sched_clock());
 
 	return 0;
 }
 
 static struct clocksource clocksource_microblaze = {
-	.name		= "microblaze_clocksource",
+	.name		= "xilinx_clocksource",
 	.rating		= 300,
-	.read		= microblaze_read,
+	.read		= xilinx_read,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static int __init microblaze_clocksource_init(void)
+static int __init xilinx_clocksource_init(void)
 {
 	if (clocksource_register_hz(&clocksource_microblaze, timer_clock_freq))
 		panic("failed to register clocksource");
 
 	/* stop timer1 */
-	out_be32(TIMER_BASE + TCSR1, in_be32(TIMER_BASE + TCSR1) & ~TCSR_ENT);
+	out_be32(timer_baseaddr + TCSR1,
+		 in_be32(timer_baseaddr + TCSR1) & ~TCSR_ENT);
 	/* start timer1 - up counting without interrupt */
-	out_be32(TIMER_BASE + TCSR1, TCSR_TINT|TCSR_ENT|TCSR_ARHT);
+	out_be32(timer_baseaddr + TCSR1, TCSR_TINT|TCSR_ENT|TCSR_ARHT);
 
 	/* register timecounter - for ftrace support */
-	init_microblaze_timecounter();
+	init_xilinx_timecounter();
 	return 0;
 }
 
@@ -240,55 +227,31 @@ static int __init microblaze_clocksource_init(void)
  */
 static int timer_initialized;
 
-void __init time_init(void)
+static void __init xilinx_timer_init(struct device_node *timer)
 {
 	u32 irq;
 	u32 timer_num = 1;
-	struct device_node *timer = NULL;
-	const void *prop;
-#ifdef CONFIG_SELFMOD_TIMER
-	unsigned int timer_baseaddr = 0;
-	int arr_func[] = {
-				(int)&microblaze_read,
-				(int)&timer_interrupt,
-				(int)&microblaze_clocksource_init,
-				(int)&microblaze_timer_set_mode,
-				(int)&microblaze_timer_set_next_event,
-				0
-			};
-#endif
-	prop = of_get_property(of_chosen, "system-timer", NULL);
-	if (prop)
-		timer = of_find_node_by_phandle(be32_to_cpup(prop));
-	else
-		pr_info("No chosen timer found, using default\n");
-
-	if (!timer)
-		timer = of_find_compatible_node(NULL, NULL,
-						"xlnx,xps-timer-1.00.a");
-	BUG_ON(!timer);
-
-	timer_baseaddr = be32_to_cpup(of_get_property(timer, "reg", NULL));
-	timer_baseaddr = (unsigned long) ioremap(timer_baseaddr, PAGE_SIZE);
+	int ret;
+
+	timer_baseaddr = of_iomap(timer, 0);
+	if (!timer_baseaddr) {
+		pr_err("ERROR: invalid timer base address\n");
+		BUG();
+	}
+
 	irq = irq_of_parse_and_map(timer, 0);
-	timer_num = be32_to_cpup(of_get_property(timer,
-						"xlnx,one-timer-only", NULL));
+
+	of_property_read_u32(timer, "xlnx,one-timer-only", &timer_num);
 	if (timer_num) {
-		pr_emerg("Please   enable two timers in HW\n");
+		pr_emerg("Please enable two timers in HW\n");
 		BUG();
 	}
 
-#ifdef CONFIG_SELFMOD_TIMER
-	selfmod_function((int *) arr_func, timer_baseaddr);
-#endif
-	pr_info("%s #0 at 0x%08x, irq=%d\n",
-		timer->name, timer_baseaddr, irq);
+	pr_info("%s: irq=%d\n", timer->full_name, irq);
 
 	/* If there is clock-frequency property than use it */
-	prop = of_get_property(timer, "clock-frequency", NULL);
-	if (prop)
-		timer_clock_freq = be32_to_cpup(prop);
-	else
+	ret = of_property_read_u32(timer, "clock-frequency", &timer_clock_freq);
+	if (ret < 0)
 		timer_clock_freq = cpuinfo.cpu_clock_freq;
 
 	freq_div_hz = timer_clock_freq / HZ;
@@ -297,8 +260,8 @@ void __init time_init(void)
 #ifdef CONFIG_HEART_BEAT
 	setup_heartbeat();
 #endif
-	microblaze_clocksource_init();
-	microblaze_clockevent_init();
+	xilinx_clocksource_init();
+	xilinx_clockevent_init();
 	timer_initialized = 1;
 }
 
@@ -312,3 +275,6 @@ unsigned long long notrace sched_clock(void)
 	}
 	return 0;
 }
+
+CLOCKSOURCE_OF_DECLARE(xilinx_timer, "xlnx,xps-timer-1.00.a",
+		       xilinx_timer_init);
diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c
index 731f739..fa4cf52 100644
--- a/arch/microblaze/mm/fault.c
+++ b/arch/microblaze/mm/fault.c
@@ -92,8 +92,7 @@ void do_page_fault(struct pt_regs *regs, unsigned long address,
 	int code = SEGV_MAPERR;
 	int is_write = error_code & ESR_S;
 	int fault;
-	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
-					 (is_write ? FAULT_FLAG_WRITE : 0);
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
 
 	regs->ear = address;
 	regs->esr = error_code;
@@ -121,6 +120,9 @@ void do_page_fault(struct pt_regs *regs, unsigned long address,
 		die("Weird page fault", regs, SIGSEGV);
 	}
 
+	if (user_mode(regs))
+		flags |= FAULT_FLAG_USER;
+
 	/* When running in the kernel we expect faults to occur only to
 	 * addresses in user space.  All other faults represent errors in the
 	 * kernel and should generate an OOPS.  Unfortunately, in the case of an
@@ -199,6 +201,7 @@ good_area:
 	if (unlikely(is_write)) {
 		if (unlikely(!(vma->vm_flags & VM_WRITE)))
 			goto bad_area;
+		flags |= FAULT_FLAG_WRITE;
 	/* a read */
 	} else {
 		/* protection fault */
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index bdb8ea1..1b93bf0 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -657,67 +657,42 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
 void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 				  struct device_node *dev, int primary)
 {
-	const u32 *ranges;
-	int rlen;
-	int pna = of_n_addr_cells(dev);
-	int np = pna + 5;
 	int memno = 0, isa_hole = -1;
-	u32 pci_space;
-	unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size;
 	unsigned long long isa_mb = 0;
 	struct resource *res;
+	struct of_pci_range range;
+	struct of_pci_range_parser parser;
 
 	pr_info("PCI host bridge %s %s ranges:\n",
 	       dev->full_name, primary ? "(primary)" : "");
 
-	/* Get ranges property */
-	ranges = of_get_property(dev, "ranges", &rlen);
-	if (ranges == NULL)
+	/* Check for ranges property */
+	if (of_pci_range_parser_init(&parser, dev))
 		return;
 
-	/* Parse it */
 	pr_debug("Parsing ranges property...\n");
-	while ((rlen -= np * 4) >= 0) {
+	for_each_of_pci_range(&parser, &range) {
 		/* Read next ranges element */
-		pci_space = ranges[0];
-		pci_addr = of_read_number(ranges + 1, 2);
-		cpu_addr = of_translate_address(dev, ranges + 3);
-		size = of_read_number(ranges + pna + 3, 2);
-
 		pr_debug("pci_space: 0x%08x pci_addr:0x%016llx ",
-				pci_space, pci_addr);
+				range.pci_space, range.pci_addr);
 		pr_debug("cpu_addr:0x%016llx size:0x%016llx\n",
-					cpu_addr, size);
-
-		ranges += np;
+					range.cpu_addr, range.size);
 
 		/* If we failed translation or got a zero-sized region
 		 * (some FW try to feed us with non sensical zero sized regions
 		 * such as power3 which look like some kind of attempt
 		 * at exposing the VGA memory hole)
 		 */
-		if (cpu_addr == OF_BAD_ADDR || size == 0)
+		if (range.cpu_addr == OF_BAD_ADDR || range.size == 0)
 			continue;
 
-		/* Now consume following elements while they are contiguous */
-		for (; rlen >= np * sizeof(u32);
-		     ranges += np, rlen -= np * 4) {
-			if (ranges[0] != pci_space)
-				break;
-			pci_next = of_read_number(ranges + 1, 2);
-			cpu_next = of_translate_address(dev, ranges + 3);
-			if (pci_next != pci_addr + size ||
-			    cpu_next != cpu_addr + size)
-				break;
-			size += of_read_number(ranges + pna + 3, 2);
-		}
-
 		/* Act based on address space type */
 		res = NULL;
-		switch ((pci_space >> 24) & 0x3) {
-		case 1:		/* PCI IO space */
+		switch (range.flags & IORESOURCE_TYPE_BITS) {
+		case IORESOURCE_IO:
 			pr_info("  IO 0x%016llx..0x%016llx -> 0x%016llx\n",
-			       cpu_addr, cpu_addr + size - 1, pci_addr);
+				range.cpu_addr, range.cpu_addr + range.size - 1,
+				range.pci_addr);
 
 			/* We support only one IO range */
 			if (hose->pci_io_size) {
@@ -725,11 +700,12 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 				continue;
 			}
 			/* On 32 bits, limit I/O space to 16MB */
-			if (size > 0x01000000)
-				size = 0x01000000;
+			if (range.size > 0x01000000)
+				range.size = 0x01000000;
 
 			/* 32 bits needs to map IOs here */
-			hose->io_base_virt = ioremap(cpu_addr, size);
+			hose->io_base_virt = ioremap(range.cpu_addr,
+						range.size);
 
 			/* Expect trouble if pci_addr is not 0 */
 			if (primary)
@@ -738,19 +714,20 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 			/* pci_io_size and io_base_phys always represent IO
 			 * space starting at 0 so we factor in pci_addr
 			 */
-			hose->pci_io_size = pci_addr + size;
-			hose->io_base_phys = cpu_addr - pci_addr;
+			hose->pci_io_size = range.pci_addr + range.size;
+			hose->io_base_phys = range.cpu_addr - range.pci_addr;
 
 			/* Build resource */
 			res = &hose->io_resource;
-			res->flags = IORESOURCE_IO;
-			res->start = pci_addr;
+			range.cpu_addr = range.pci_addr;
+
 			break;
-		case 2:		/* PCI Memory space */
-		case 3:		/* PCI 64 bits Memory space */
+		case IORESOURCE_MEM:
 			pr_info(" MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
-			       cpu_addr, cpu_addr + size - 1, pci_addr,
-			       (pci_space & 0x40000000) ? "Prefetch" : "");
+				range.cpu_addr, range.cpu_addr + range.size - 1,
+				range.pci_addr,
+				(range.pci_space & 0x40000000) ?
+				"Prefetch" : "");
 
 			/* We support only 3 memory ranges */
 			if (memno >= 3) {
@@ -758,13 +735,13 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 				continue;
 			}
 			/* Handles ISA memory hole space here */
-			if (pci_addr == 0) {
-				isa_mb = cpu_addr;
+			if (range.pci_addr == 0) {
+				isa_mb = range.cpu_addr;
 				isa_hole = memno;
 				if (primary || isa_mem_base == 0)
-					isa_mem_base = cpu_addr;
-				hose->isa_mem_phys = cpu_addr;
-				hose->isa_mem_size = size;
+					isa_mem_base = range.cpu_addr;
+				hose->isa_mem_phys = range.cpu_addr;
+				hose->isa_mem_size = range.size;
 			}
 
 			/* We get the PCI/Mem offset from the first range or
@@ -772,30 +749,23 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 			 * hole. If they don't match, bugger.
 			 */
 			if (memno == 0 ||
-			    (isa_hole >= 0 && pci_addr != 0 &&
+			    (isa_hole >= 0 && range.pci_addr != 0 &&
 			     hose->pci_mem_offset == isa_mb))
-				hose->pci_mem_offset = cpu_addr - pci_addr;
-			else if (pci_addr != 0 &&
-				 hose->pci_mem_offset != cpu_addr - pci_addr) {
+				hose->pci_mem_offset = range.cpu_addr -
+							range.pci_addr;
+			else if (range.pci_addr != 0 &&
+				 hose->pci_mem_offset != range.cpu_addr -
+							range.pci_addr) {
 				pr_info(" \\--> Skipped (offset mismatch) !\n");
 				continue;
 			}
 
 			/* Build resource */
 			res = &hose->mem_resources[memno++];
-			res->flags = IORESOURCE_MEM;
-			if (pci_space & 0x40000000)
-				res->flags |= IORESOURCE_PREFETCH;
-			res->start = cpu_addr;
 			break;
 		}
-		if (res != NULL) {
-			res->name = dev->full_name;
-			res->end = res->start + size - 1;
-			res->parent = NULL;
-			res->sibling = NULL;
-			res->child = NULL;
-		}
+		if (res != NULL)
+			of_pci_range_to_resource(&range, dev, res);
 	}
 
 	/* If there's an ISA hole and the pci_mem_offset is -not- matching
diff --git a/arch/microblaze/platform/Kconfig.platform b/arch/microblaze/platform/Kconfig.platform
index b174721..db1aa5c 100644
--- a/arch/microblaze/platform/Kconfig.platform
+++ b/arch/microblaze/platform/Kconfig.platform
@@ -18,28 +18,6 @@ config PLATFORM_GENERIC
 
 endchoice
 
-config SELFMOD
-	bool "Use self modified code for intc/timer"
-	depends on NO_MMU
-	default n
-	help
-	  This choice enables self-modified code for interrupt controller
-	  and timer.
-
-config SELFMOD_INTC
-	bool "Use self modified code for intc"
-	depends on SELFMOD
-	default y
-	help
-	  This choice enables self-modified code for interrupt controller.
-
-config SELFMOD_TIMER
-	bool "Use self modified code for timer"
-	depends on SELFMOD
-	default y
-	help
-	  This choice enables self-modified code for timer.
-
 config OPT_LIB_FUNCTION
 	bool "Optimalized lib function"
 	default y
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index d9d81c2..6e23912 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -20,7 +20,6 @@ platforms += mti-sead3
 platforms += netlogic
 platforms += pmcs-msp71xx
 platforms += pnx833x
-platforms += powertv
 platforms += ralink
 platforms += rb532
 platforms += sgi-ip22
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index e12764c..17cc7ff 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -8,6 +8,7 @@ config MIPS
 	select HAVE_PERF_EVENTS
 	select PERF_USE_VMALLOC
 	select HAVE_ARCH_KGDB
+	select HAVE_ARCH_TRACEHOOK
 	select ARCH_HAVE_CUSTOM_GPIO_H
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
@@ -18,6 +19,7 @@ config MIPS
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
 	select HAVE_DEBUG_KMEMLEAK
+	select HAVE_SYSCALL_TRACEPOINTS
 	select ARCH_BINFMT_ELF_RANDOMIZE_PIE
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES && 64BIT
 	select RTC_LIB if !MACH_LOONGSON
@@ -25,7 +27,6 @@ config MIPS
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select HAVE_DMA_ATTRS
 	select HAVE_DMA_API_DEBUG
-	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_PCI_IOMAP
@@ -95,6 +96,7 @@ config ATH79
 	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select HAVE_CLK
+	select CLKDEV_LOOKUP
 	select IRQ_CPU
 	select MIPS_MACHINE
 	select SYS_HAS_CPU_MIPS32_R2
@@ -131,7 +133,6 @@ config BCM63XX
 	select IRQ_CPU
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_BMIPS4350 if !BCM63XX_CPU_6338 && !BCM63XX_CPU_6345 && !BCM63XX_CPU_6348
-	select NR_CPUS_DEFAULT_2
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
@@ -147,6 +148,7 @@ config MIPS_COBALT
 	select CSRC_R4K
 	select CEVT_GT641XX
 	select DMA_NONCOHERENT
+	select EARLY_PRINTK_8250 if EARLY_PRINTK
 	select HW_HAS_PCI
 	select I8253
 	select I8259
@@ -413,23 +415,6 @@ config PMC_MSP
 	  of integrated peripherals, interfaces and DSPs in addition to
 	  a variety of MIPS cores.
 
-config POWERTV
-	bool "Cisco PowerTV"
-	select BOOT_ELF32
-	select CEVT_R4K
-	select CPU_MIPSR2_IRQ_VI
-	select CPU_MIPSR2_IRQ_EI
-	select CSRC_POWERTV
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select SYS_HAS_CPU_MIPS32_R2
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_HIGHMEM
-	select USB_OHCI_LITTLE_ENDIAN
-	help
-	  This enables support for the Cisco PowerTV Platform.
-
 config RALINK
 	bool "Ralink based machines"
 	select CEVT_R4K
@@ -445,6 +430,8 @@ config RALINK
 	select SYS_HAS_EARLY_PRINTK
 	select HAVE_MACH_CLKDEV
 	select CLKDEV_LOOKUP
+	select ARCH_HAS_RESET_CONTROLLER
+	select RESET_CONTROLLER
 
 config SGI_IP22
 	bool "SGI IP22 (Indy/Indigo2)"
@@ -609,7 +596,6 @@ config SIBYTE_SWARM
 	select BOOT_ELF32
 	select DMA_COHERENT
 	select HAVE_PATA_PLATFORM
-	select NR_CPUS_DEFAULT_2
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -623,7 +609,6 @@ config SIBYTE_LITTLESUR
 	select BOOT_ELF32
 	select DMA_COHERENT
 	select HAVE_PATA_PLATFORM
-	select NR_CPUS_DEFAULT_2
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -635,7 +620,6 @@ config SIBYTE_SENTOSA
 	bool "Sibyte BCM91250E-Sentosa"
 	select BOOT_ELF32
 	select DMA_COHERENT
-	select NR_CPUS_DEFAULT_2
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -727,11 +711,11 @@ config CAVIUM_OCTEON_SOC
 	select SYS_HAS_CPU_CAVIUM_OCTEON
 	select SWAP_IO_SPACE
 	select HW_HAS_PCI
-	select ARCH_SUPPORTS_MSI
 	select ZONE_DMA32
 	select USB_ARCH_HAS_OHCI
 	select USB_ARCH_HAS_EHCI
 	select HOLES_IN_ZONE
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  This option supports all of the Octeon reference boards from Cavium
 	  Networks. It builds a kernel that dynamically determines the Octeon
@@ -763,7 +747,6 @@ config NLM_XLR_BOARD
 	select CEVT_R4K
 	select CSRC_R4K
 	select IRQ_CPU
-	select ARCH_SUPPORTS_MSI
 	select ZONE_DMA32 if 64BIT
 	select SYNC_R4K
 	select SYS_HAS_EARLY_PRINTK
@@ -814,7 +797,6 @@ source "arch/mips/jz4740/Kconfig"
 source "arch/mips/lantiq/Kconfig"
 source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmcs-msp71xx/Kconfig"
-source "arch/mips/powertv/Kconfig"
 source "arch/mips/ralink/Kconfig"
 source "arch/mips/sgi-ip27/Kconfig"
 source "arch/mips/sibyte/Kconfig"
@@ -893,9 +875,6 @@ config CSRC_BCM1480
 config CSRC_IOASIC
 	bool
 
-config CSRC_POWERTV
-	bool
-
 config CSRC_R4K
 	bool
 
@@ -1492,8 +1471,10 @@ config SYS_SUPPORTS_ZBOOT
 	bool
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_BZIP2
+	select HAVE_KERNEL_LZ4
 	select HAVE_KERNEL_LZMA
 	select HAVE_KERNEL_LZO
+	select HAVE_KERNEL_XZ
 
 config SYS_SUPPORTS_ZBOOT_UART16550
 	bool
@@ -1862,7 +1843,6 @@ config MIPS_MT_SMP
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_IRQ_EI
 	select MIPS_MT
-	select NR_CPUS_DEFAULT_2
 	select SMP
 	select SYS_SUPPORTS_SCHED_SMT if SMP
 	select SYS_SUPPORTS_SMP
@@ -1981,6 +1961,7 @@ config MIPS_VPE_APSP_API
 config MIPS_CMP
 	bool "MIPS CMP framework support"
 	depends on SYS_SUPPORTS_MIPS_CMP
+	select SMP
 	select SYNC_R4K
 	select SYS_SUPPORTS_SMP
 	select SYS_SUPPORTS_SCHED_SMT if SMP
@@ -2173,12 +2154,6 @@ config SYS_SUPPORTS_MIPS_CMP
 config SYS_SUPPORTS_SMP
 	bool
 
-config NR_CPUS_DEFAULT_1
-	bool
-
-config NR_CPUS_DEFAULT_2
-	bool
-
 config NR_CPUS_DEFAULT_4
 	bool
 
@@ -2196,10 +2171,8 @@ config NR_CPUS_DEFAULT_64
 
 config NR_CPUS
 	int "Maximum number of CPUs (2-64)"
-	range 1 64 if NR_CPUS_DEFAULT_1
+	range 2 64
 	depends on SMP
-	default "1" if NR_CPUS_DEFAULT_1
-	default "2" if NR_CPUS_DEFAULT_2
 	default "4" if NR_CPUS_DEFAULT_4
 	default "8" if NR_CPUS_DEFAULT_8
 	default "16" if NR_CPUS_DEFAULT_16
@@ -2305,9 +2278,9 @@ config KEXEC
 
 	  It is an ongoing process to be certain the hardware in a machine
 	  is properly shutdown, so do not be surprised if this code does not
-	  initially work for you.  It may help to enable device hotplugging
-	  support.  As of this writing the exact hardware interface is
-	  strongly in flux, so no good recommendation can be made.
+	  initially work for you.  As of this writing the exact hardware
+	  interface is strongly in flux, so no good recommendation can be
+	  made.
 
 config CRASH_DUMP
 	  bool "Kernel crash dumps"
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index 37871f0..b147e70 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -20,6 +20,14 @@ config EARLY_PRINTK
 	  doesn't cooperate with an X server. You should normally say N here,
 	  unless you want to debug such a crash.
 
+config EARLY_PRINTK_8250
+	bool "8250/16550 and compatible serial early printk driver"
+	depends on EARLY_PRINTK
+	default n
+	help
+	  If you say Y here, it will be possible to use a 8250/16550 serial
+	  port as the boot console.
+
 config CMDLINE_BOOL
 	bool "Built-in kernel command line"
 	default n
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 37f9ef3..de300b9 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -194,6 +194,8 @@ include $(srctree)/arch/mips/Kbuild.platforms
 ifdef CONFIG_PHYSICAL_START
 load-y					= $(CONFIG_PHYSICAL_START)
 endif
+entry-y				= 0x$(shell $(NM) vmlinux 2>/dev/null \
+					| grep "\bkernel_entry\b" | cut -f1 -d \ )
 
 cflags-y			+= -I$(srctree)/arch/mips/include/asm/mach-generic
 drivers-$(CONFIG_PCI)		+= arch/mips/pci/
@@ -225,6 +227,9 @@ KBUILD_CFLAGS	+= $(cflags-y)
 KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y)
 KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)
 
+bootvars-y	= VMLINUX_LOAD_ADDRESS=$(load-y) \
+		  VMLINUX_ENTRY_ADDRESS=$(entry-y)
+
 LDFLAGS			+= -m $(ld-emul)
 
 ifdef CONFIG_CC_STACKPROTECTOR
@@ -254,9 +259,25 @@ drivers-$(CONFIG_OPROFILE)	+= arch/mips/oprofile/
 # suspend and hibernation support
 drivers-$(CONFIG_PM)	+= arch/mips/power/
 
+# boot image targets (arch/mips/boot/)
+boot-y			:= vmlinux.bin
+boot-y			+= vmlinux.ecoff
+boot-y			+= vmlinux.srec
+ifeq ($(shell expr $(load-y) \< 0xffffffff80000000 2> /dev/null), 0)
+boot-y			+= uImage
+boot-y			+= uImage.gz
+endif
+
+# compressed boot image targets (arch/mips/boot/compressed/)
+bootz-y			:= vmlinuz
+bootz-y			+= vmlinuz.bin
+bootz-y			+= vmlinuz.ecoff
+bootz-y			+= vmlinuz.srec
+
 ifdef CONFIG_LASAT
 rom.bin rom.sw: vmlinux
-	$(Q)$(MAKE) $(build)=arch/mips/lasat/image $@
+	$(Q)$(MAKE) $(build)=arch/mips/lasat/image \
+		$(bootvars-y) $@
 endif
 
 #
@@ -264,29 +285,37 @@ endif
 # Other need ECOFF, so we build a 32-bit ELF binary for them which we then
 # convert to ECOFF using elf2ecoff.
 #
+quiet_cmd_32 = OBJCOPY $@
+	cmd_32 = $(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@
 vmlinux.32: vmlinux
-	$(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@
-
-
-#obj-$(CONFIG_KPROBES)		+= kprobes.o
+	$(call cmd,32)
 
 #
 # The 64-bit ELF tools are pretty broken so at this time we generate 64-bit
 # ELF files from 32-bit files by conversion.
 #
+quiet_cmd_64 = OBJCOPY $@
+	cmd_64 = $(OBJCOPY) -O $(64bit-bfd) $(OBJCOPYFLAGS) $< $@
 vmlinux.64: vmlinux
-	$(OBJCOPY) -O $(64bit-bfd) $(OBJCOPYFLAGS) $< $@
+	$(call cmd,64)
 
 all:	$(all-y)
 
 # boot
-vmlinux.bin vmlinux.ecoff vmlinux.srec: $(vmlinux-32) FORCE
-	$(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) arch/mips/boot/$@
+$(boot-y): $(vmlinux-32) FORCE
+	$(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) \
+		$(bootvars-y) arch/mips/boot/$@
 
+ifdef CONFIG_SYS_SUPPORTS_ZBOOT
 # boot/compressed
-vmlinuz vmlinuz.bin vmlinuz.ecoff vmlinuz.srec: $(vmlinux-32) FORCE
+$(bootz-y): $(vmlinux-32) FORCE
 	$(Q)$(MAKE) $(build)=arch/mips/boot/compressed \
-	   VMLINUX_LOAD_ADDRESS=$(load-y) 32bit-bfd=$(32bit-bfd) $@
+		$(bootvars-y) 32bit-bfd=$(32bit-bfd) $@
+else
+vmlinuz: FORCE
+	@echo '   CONFIG_SYS_SUPPORTS_ZBOOT is not enabled'
+	/bin/false
+endif
 
 
 CLEAN_FILES += vmlinux.32 vmlinux.64
@@ -323,6 +352,8 @@ define archhelp
 	echo '  vmlinuz.ecoff        - ECOFF zboot image'
 	echo '  vmlinuz.bin          - Raw binary zboot image'
 	echo '  vmlinuz.srec         - SREC zboot image'
+	echo '  uImage               - U-Boot image'
+	echo '  uImage.gz            - U-Boot image (gzip)'
 	echo
 	echo '  These will be default as appropriate for a configured platform.'
 endef
diff --git a/arch/mips/alchemy/board-mtx1.c b/arch/mips/alchemy/board-mtx1.c
index 4a9baa9..9969dba 100644
--- a/arch/mips/alchemy/board-mtx1.c
+++ b/arch/mips/alchemy/board-mtx1.c
@@ -276,7 +276,7 @@ static struct platform_device mtx1_pci_host = {
 	.resource	= alchemy_pci_host_res,
 };
 
-static struct __initdata platform_device * mtx1_devs[] = {
+static struct platform_device *mtx1_devs[] __initdata = {
 	&mtx1_pci_host,
 	&mtx1_gpio_leds,
 	&mtx1_wdt,
diff --git a/arch/mips/alchemy/common/usb.c b/arch/mips/alchemy/common/usb.c
index fcc6956..2adc7ed 100644
--- a/arch/mips/alchemy/common/usb.c
+++ b/arch/mips/alchemy/common/usb.c
@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/syscore_ops.h>
+#include <asm/cpu.h>
 #include <asm/mach-au1x00/au1000.h>
 
 /* control register offsets */
@@ -358,7 +359,7 @@ static inline int au1200_coherency_bug(void)
 {
 #if defined(CONFIG_DMA_COHERENT)
 	/* Au1200 AB USB does not support coherent memory */
-	if (!(read_c0_prid() & 0xff)) {
+	if (!(read_c0_prid() & PRID_REV_MASK)) {
 		printk(KERN_INFO "Au1200 USB: this is chip revision AB !!\n");
 		printk(KERN_INFO "Au1200 USB: update your board or re-configure"
 				 " the kernel\n");
diff --git a/arch/mips/alchemy/devboards/db1235.c b/arch/mips/alchemy/devboards/db1235.c
index c76a90f..bac19dc 100644
--- a/arch/mips/alchemy/devboards/db1235.c
+++ b/arch/mips/alchemy/devboards/db1235.c
@@ -59,7 +59,7 @@ void __init board_setup(void)
 		ret = -ENODEV;
 	}
 	if (ret)
-		panic("cannot initialize board support\n");
+		panic("cannot initialize board support");
 }
 
 int __init db1235_arch_init(void)
diff --git a/arch/mips/ath79/clock.c b/arch/mips/ath79/clock.c
index 765ef30..26479f4 100644
--- a/arch/mips/ath79/clock.c
+++ b/arch/mips/ath79/clock.c
@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/clkdev.h>
 
 #include <asm/div64.h>
 
@@ -31,92 +32,132 @@ struct clk {
 	unsigned long rate;
 };
 
-static struct clk ath79_ref_clk;
-static struct clk ath79_cpu_clk;
-static struct clk ath79_ddr_clk;
-static struct clk ath79_ahb_clk;
-static struct clk ath79_wdt_clk;
-static struct clk ath79_uart_clk;
+static void __init ath79_add_sys_clkdev(const char *id, unsigned long rate)
+{
+	struct clk *clk;
+	int err;
+
+	clk = kzalloc(sizeof(*clk), GFP_KERNEL);
+	if (!clk)
+		panic("failed to allocate %s clock structure", id);
+
+	clk->rate = rate;
+
+	err = clk_register_clkdev(clk, id, NULL);
+	if (err)
+		panic("unable to register %s clock device", id);
+}
 
 static void __init ar71xx_clocks_init(void)
 {
+	unsigned long ref_rate;
+	unsigned long cpu_rate;
+	unsigned long ddr_rate;
+	unsigned long ahb_rate;
 	u32 pll;
 	u32 freq;
 	u32 div;
 
-	ath79_ref_clk.rate = AR71XX_BASE_FREQ;
+	ref_rate = AR71XX_BASE_FREQ;
 
 	pll = ath79_pll_rr(AR71XX_PLL_REG_CPU_CONFIG);
 
 	div = ((pll >> AR71XX_PLL_DIV_SHIFT) & AR71XX_PLL_DIV_MASK) + 1;
-	freq = div * ath79_ref_clk.rate;
+	freq = div * ref_rate;
 
 	div = ((pll >> AR71XX_CPU_DIV_SHIFT) & AR71XX_CPU_DIV_MASK) + 1;
-	ath79_cpu_clk.rate = freq / div;
+	cpu_rate = freq / div;
 
 	div = ((pll >> AR71XX_DDR_DIV_SHIFT) & AR71XX_DDR_DIV_MASK) + 1;
-	ath79_ddr_clk.rate = freq / div;
+	ddr_rate = freq / div;
 
 	div = (((pll >> AR71XX_AHB_DIV_SHIFT) & AR71XX_AHB_DIV_MASK) + 1) * 2;
-	ath79_ahb_clk.rate = ath79_cpu_clk.rate / div;
+	ahb_rate = cpu_rate / div;
+
+	ath79_add_sys_clkdev("ref", ref_rate);
+	ath79_add_sys_clkdev("cpu", cpu_rate);
+	ath79_add_sys_clkdev("ddr", ddr_rate);
+	ath79_add_sys_clkdev("ahb", ahb_rate);
 
-	ath79_wdt_clk.rate = ath79_ahb_clk.rate;
-	ath79_uart_clk.rate = ath79_ahb_clk.rate;
+	clk_add_alias("wdt", NULL, "ahb", NULL);
+	clk_add_alias("uart", NULL, "ahb", NULL);
 }
 
 static void __init ar724x_clocks_init(void)
 {
+	unsigned long ref_rate;
+	unsigned long cpu_rate;
+	unsigned long ddr_rate;
+	unsigned long ahb_rate;
 	u32 pll;
 	u32 freq;
 	u32 div;
 
-	ath79_ref_clk.rate = AR724X_BASE_FREQ;
+	ref_rate = AR724X_BASE_FREQ;
 	pll = ath79_pll_rr(AR724X_PLL_REG_CPU_CONFIG);
 
 	div = ((pll >> AR724X_PLL_DIV_SHIFT) & AR724X_PLL_DIV_MASK);
-	freq = div * ath79_ref_clk.rate;
+	freq = div * ref_rate;
 
 	div = ((pll >> AR724X_PLL_REF_DIV_SHIFT) & AR724X_PLL_REF_DIV_MASK);
 	freq *= div;
 
-	ath79_cpu_clk.rate = freq;
+	cpu_rate = freq;
 
 	div = ((pll >> AR724X_DDR_DIV_SHIFT) & AR724X_DDR_DIV_MASK) + 1;
-	ath79_ddr_clk.rate = freq / div;
+	ddr_rate = freq / div;
 
 	div = (((pll >> AR724X_AHB_DIV_SHIFT) & AR724X_AHB_DIV_MASK) + 1) * 2;
-	ath79_ahb_clk.rate = ath79_cpu_clk.rate / div;
+	ahb_rate = cpu_rate / div;
+
+	ath79_add_sys_clkdev("ref", ref_rate);
+	ath79_add_sys_clkdev("cpu", cpu_rate);
+	ath79_add_sys_clkdev("ddr", ddr_rate);
+	ath79_add_sys_clkdev("ahb", ahb_rate);
 
-	ath79_wdt_clk.rate = ath79_ahb_clk.rate;
-	ath79_uart_clk.rate = ath79_ahb_clk.rate;
+	clk_add_alias("wdt", NULL, "ahb", NULL);
+	clk_add_alias("uart", NULL, "ahb", NULL);
 }
 
 static void __init ar913x_clocks_init(void)
 {
+	unsigned long ref_rate;
+	unsigned long cpu_rate;
+	unsigned long ddr_rate;
+	unsigned long ahb_rate;
 	u32 pll;
 	u32 freq;
 	u32 div;
 
-	ath79_ref_clk.rate = AR913X_BASE_FREQ;
+	ref_rate = AR913X_BASE_FREQ;
 	pll = ath79_pll_rr(AR913X_PLL_REG_CPU_CONFIG);
 
 	div = ((pll >> AR913X_PLL_DIV_SHIFT) & AR913X_PLL_DIV_MASK);
-	freq = div * ath79_ref_clk.rate;
+	freq = div * ref_rate;
 
-	ath79_cpu_clk.rate = freq;
+	cpu_rate = freq;
 
 	div = ((pll >> AR913X_DDR_DIV_SHIFT) & AR913X_DDR_DIV_MASK) + 1;
-	ath79_ddr_clk.rate = freq / div;
+	ddr_rate = freq / div;
 
 	div = (((pll >> AR913X_AHB_DIV_SHIFT) & AR913X_AHB_DIV_MASK) + 1) * 2;
-	ath79_ahb_clk.rate = ath79_cpu_clk.rate / div;
+	ahb_rate = cpu_rate / div;
 
-	ath79_wdt_clk.rate = ath79_ahb_clk.rate;
-	ath79_uart_clk.rate = ath79_ahb_clk.rate;
+	ath79_add_sys_clkdev("ref", ref_rate);
+	ath79_add_sys_clkdev("cpu", cpu_rate);
+	ath79_add_sys_clkdev("ddr", ddr_rate);
+	ath79_add_sys_clkdev("ahb", ahb_rate);
+
+	clk_add_alias("wdt", NULL, "ahb", NULL);
+	clk_add_alias("uart", NULL, "ahb", NULL);
 }
 
 static void __init ar933x_clocks_init(void)
 {
+	unsigned long ref_rate;
+	unsigned long cpu_rate;
+	unsigned long ddr_rate;
+	unsigned long ahb_rate;
 	u32 clock_ctrl;
 	u32 cpu_config;
 	u32 freq;
@@ -124,21 +165,21 @@ static void __init ar933x_clocks_init(void)
 
 	t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
 	if (t & AR933X_BOOTSTRAP_REF_CLK_40)
-		ath79_ref_clk.rate = (40 * 1000 * 1000);
+		ref_rate = (40 * 1000 * 1000);
 	else
-		ath79_ref_clk.rate = (25 * 1000 * 1000);
+		ref_rate = (25 * 1000 * 1000);
 
 	clock_ctrl = ath79_pll_rr(AR933X_PLL_CLOCK_CTRL_REG);
 	if (clock_ctrl & AR933X_PLL_CLOCK_CTRL_BYPASS) {
-		ath79_cpu_clk.rate = ath79_ref_clk.rate;
-		ath79_ahb_clk.rate = ath79_ref_clk.rate;
-		ath79_ddr_clk.rate = ath79_ref_clk.rate;
+		cpu_rate = ref_rate;
+		ahb_rate = ref_rate;
+		ddr_rate = ref_rate;
 	} else {
 		cpu_config = ath79_pll_rr(AR933X_PLL_CPU_CONFIG_REG);
 
 		t = (cpu_config >> AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
 		    AR933X_PLL_CPU_CONFIG_REFDIV_MASK;
-		freq = ath79_ref_clk.rate / t;
+		freq = ref_rate / t;
 
 		t = (cpu_config >> AR933X_PLL_CPU_CONFIG_NINT_SHIFT) &
 		    AR933X_PLL_CPU_CONFIG_NINT_MASK;
@@ -153,19 +194,24 @@ static void __init ar933x_clocks_init(void)
 
 		t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT) &
 		     AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK) + 1;
-		ath79_cpu_clk.rate = freq / t;
+		cpu_rate = freq / t;
 
 		t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT) &
 		      AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK) + 1;
-		ath79_ddr_clk.rate = freq / t;
+		ddr_rate = freq / t;
 
 		t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT) &
 		     AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK) + 1;
-		ath79_ahb_clk.rate = freq / t;
+		ahb_rate = freq / t;
 	}
 
-	ath79_wdt_clk.rate = ath79_ref_clk.rate;
-	ath79_uart_clk.rate = ath79_ref_clk.rate;
+	ath79_add_sys_clkdev("ref", ref_rate);
+	ath79_add_sys_clkdev("cpu", cpu_rate);
+	ath79_add_sys_clkdev("ddr", ddr_rate);
+	ath79_add_sys_clkdev("ahb", ahb_rate);
+
+	clk_add_alias("wdt", NULL, "ahb", NULL);
+	clk_add_alias("uart", NULL, "ref", NULL);
 }
 
 static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac,
@@ -174,12 +220,12 @@ static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac,
 	u64 t;
 	u32 ret;
 
-	t = ath79_ref_clk.rate;
+	t = ref;
 	t *= nint;
 	do_div(t, ref_div);
 	ret = t;
 
-	t = ath79_ref_clk.rate;
+	t = ref;
 	t *= nfrac;
 	do_div(t, ref_div * frac);
 	ret += t;
@@ -190,6 +236,10 @@ static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac,
 
 static void __init ar934x_clocks_init(void)
 {
+	unsigned long ref_rate;
+	unsigned long cpu_rate;
+	unsigned long ddr_rate;
+	unsigned long ahb_rate;
 	u32 pll, out_div, ref_div, nint, nfrac, frac, clk_ctrl, postdiv;
 	u32 cpu_pll, ddr_pll;
 	u32 bootstrap;
@@ -199,9 +249,9 @@ static void __init ar934x_clocks_init(void)
 
 	bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
 	if (bootstrap & AR934X_BOOTSTRAP_REF_CLK_40)
-		ath79_ref_clk.rate = 40 * 1000 * 1000;
+		ref_rate = 40 * 1000 * 1000;
 	else
-		ath79_ref_clk.rate = 25 * 1000 * 1000;
+		ref_rate = 25 * 1000 * 1000;
 
 	pll = __raw_readl(dpll_base + AR934X_SRIF_CPU_DPLL2_REG);
 	if (pll & AR934X_SRIF_DPLL2_LOCAL_PLL) {
@@ -227,7 +277,7 @@ static void __init ar934x_clocks_init(void)
 		frac = 1 << 6;
 	}
 
-	cpu_pll = ar934x_get_pll_freq(ath79_ref_clk.rate, ref_div, nint,
+	cpu_pll = ar934x_get_pll_freq(ref_rate, ref_div, nint,
 				      nfrac, frac, out_div);
 
 	pll = __raw_readl(dpll_base + AR934X_SRIF_DDR_DPLL2_REG);
@@ -254,7 +304,7 @@ static void __init ar934x_clocks_init(void)
 		frac = 1 << 10;
 	}
 
-	ddr_pll = ar934x_get_pll_freq(ath79_ref_clk.rate, ref_div, nint,
+	ddr_pll = ar934x_get_pll_freq(ref_rate, ref_div, nint,
 				      nfrac, frac, out_div);
 
 	clk_ctrl = ath79_pll_rr(AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
@@ -263,49 +313,58 @@ static void __init ar934x_clocks_init(void)
 		  AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK;
 
 	if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_PLL_BYPASS)
-		ath79_cpu_clk.rate = ath79_ref_clk.rate;
+		cpu_rate = ref_rate;
 	else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_CPUCLK_FROM_CPUPLL)
-		ath79_cpu_clk.rate = cpu_pll / (postdiv + 1);
+		cpu_rate = cpu_pll / (postdiv + 1);
 	else
-		ath79_cpu_clk.rate = ddr_pll / (postdiv + 1);
+		cpu_rate = ddr_pll / (postdiv + 1);
 
 	postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_SHIFT) &
 		  AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK;
 
 	if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_PLL_BYPASS)
-		ath79_ddr_clk.rate = ath79_ref_clk.rate;
+		ddr_rate = ref_rate;
 	else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL)
-		ath79_ddr_clk.rate = ddr_pll / (postdiv + 1);
+		ddr_rate = ddr_pll / (postdiv + 1);
 	else
-		ath79_ddr_clk.rate = cpu_pll / (postdiv + 1);
+		ddr_rate = cpu_pll / (postdiv + 1);
 
 	postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_SHIFT) &
 		  AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK;
 
 	if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_PLL_BYPASS)
-		ath79_ahb_clk.rate = ath79_ref_clk.rate;
+		ahb_rate = ref_rate;
 	else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL)
-		ath79_ahb_clk.rate = ddr_pll / (postdiv + 1);
+		ahb_rate = ddr_pll / (postdiv + 1);
 	else
-		ath79_ahb_clk.rate = cpu_pll / (postdiv + 1);
+		ahb_rate = cpu_pll / (postdiv + 1);
+
+	ath79_add_sys_clkdev("ref", ref_rate);
+	ath79_add_sys_clkdev("cpu", cpu_rate);
+	ath79_add_sys_clkdev("ddr", ddr_rate);
+	ath79_add_sys_clkdev("ahb", ahb_rate);
 
-	ath79_wdt_clk.rate = ath79_ref_clk.rate;
-	ath79_uart_clk.rate = ath79_ref_clk.rate;
+	clk_add_alias("wdt", NULL, "ref", NULL);
+	clk_add_alias("uart", NULL, "ref", NULL);
 
 	iounmap(dpll_base);
 }
 
 static void __init qca955x_clocks_init(void)
 {
+	unsigned long ref_rate;
+	unsigned long cpu_rate;
+	unsigned long ddr_rate;
+	unsigned long ahb_rate;
 	u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
 	u32 cpu_pll, ddr_pll;
 	u32 bootstrap;
 
 	bootstrap = ath79_reset_rr(QCA955X_RESET_REG_BOOTSTRAP);
 	if (bootstrap &	QCA955X_BOOTSTRAP_REF_CLK_40)
-		ath79_ref_clk.rate = 40 * 1000 * 1000;
+		ref_rate = 40 * 1000 * 1000;
 	else
-		ath79_ref_clk.rate = 25 * 1000 * 1000;
+		ref_rate = 25 * 1000 * 1000;
 
 	pll = ath79_pll_rr(QCA955X_PLL_CPU_CONFIG_REG);
 	out_div = (pll >> QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
@@ -317,8 +376,8 @@ static void __init qca955x_clocks_init(void)
 	frac = (pll >> QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
 	       QCA955X_PLL_CPU_CONFIG_NFRAC_MASK;
 
-	cpu_pll = nint * ath79_ref_clk.rate / ref_div;
-	cpu_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 6));
+	cpu_pll = nint * ref_rate / ref_div;
+	cpu_pll += frac * ref_rate / (ref_div * (1 << 6));
 	cpu_pll /= (1 << out_div);
 
 	pll = ath79_pll_rr(QCA955X_PLL_DDR_CONFIG_REG);
@@ -331,8 +390,8 @@ static void __init qca955x_clocks_init(void)
 	frac = (pll >> QCA955X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
 	       QCA955X_PLL_DDR_CONFIG_NFRAC_MASK;
 
-	ddr_pll = nint * ath79_ref_clk.rate / ref_div;
-	ddr_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 10));
+	ddr_pll = nint * ref_rate / ref_div;
+	ddr_pll += frac * ref_rate / (ref_div * (1 << 10));
 	ddr_pll /= (1 << out_div);
 
 	clk_ctrl = ath79_pll_rr(QCA955X_PLL_CLK_CTRL_REG);
@@ -341,34 +400,39 @@ static void __init qca955x_clocks_init(void)
 		  QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
 
 	if (clk_ctrl & QCA955X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
-		ath79_cpu_clk.rate = ath79_ref_clk.rate;
+		cpu_rate = ref_rate;
 	else if (clk_ctrl & QCA955X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL)
-		ath79_cpu_clk.rate = ddr_pll / (postdiv + 1);
+		cpu_rate = ddr_pll / (postdiv + 1);
 	else
-		ath79_cpu_clk.rate = cpu_pll / (postdiv + 1);
+		cpu_rate = cpu_pll / (postdiv + 1);
 
 	postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
 		  QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
 
 	if (clk_ctrl & QCA955X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
-		ath79_ddr_clk.rate = ath79_ref_clk.rate;
+		ddr_rate = ref_rate;
 	else if (clk_ctrl & QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL)
-		ath79_ddr_clk.rate = cpu_pll / (postdiv + 1);
+		ddr_rate = cpu_pll / (postdiv + 1);
 	else
-		ath79_ddr_clk.rate = ddr_pll / (postdiv + 1);
+		ddr_rate = ddr_pll / (postdiv + 1);
 
 	postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
 		  QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
 
 	if (clk_ctrl & QCA955X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
-		ath79_ahb_clk.rate = ath79_ref_clk.rate;
+		ahb_rate = ref_rate;
 	else if (clk_ctrl & QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
-		ath79_ahb_clk.rate = ddr_pll / (postdiv + 1);
+		ahb_rate = ddr_pll / (postdiv + 1);
 	else
-		ath79_ahb_clk.rate = cpu_pll / (postdiv + 1);
+		ahb_rate = cpu_pll / (postdiv + 1);
 
-	ath79_wdt_clk.rate = ath79_ref_clk.rate;
-	ath79_uart_clk.rate = ath79_ref_clk.rate;
+	ath79_add_sys_clkdev("ref", ref_rate);
+	ath79_add_sys_clkdev("cpu", cpu_rate);
+	ath79_add_sys_clkdev("ddr", ddr_rate);
+	ath79_add_sys_clkdev("ahb", ahb_rate);
+
+	clk_add_alias("wdt", NULL, "ref", NULL);
+	clk_add_alias("uart", NULL, "ref", NULL);
 }
 
 void __init ath79_clocks_init(void)
@@ -387,46 +451,27 @@ void __init ath79_clocks_init(void)
 		qca955x_clocks_init();
 	else
 		BUG();
-
-	pr_info("Clocks: CPU:%lu.%03luMHz, DDR:%lu.%03luMHz, AHB:%lu.%03luMHz, "
-		"Ref:%lu.%03luMHz",
-		ath79_cpu_clk.rate / 1000000,
-		(ath79_cpu_clk.rate / 1000) % 1000,
-		ath79_ddr_clk.rate / 1000000,
-		(ath79_ddr_clk.rate / 1000) % 1000,
-		ath79_ahb_clk.rate / 1000000,
-		(ath79_ahb_clk.rate / 1000) % 1000,
-		ath79_ref_clk.rate / 1000000,
-		(ath79_ref_clk.rate / 1000) % 1000);
 }
 
-/*
- * Linux clock API
- */
-struct clk *clk_get(struct device *dev, const char *id)
+unsigned long __init
+ath79_get_sys_clk_rate(const char *id)
 {
-	if (!strcmp(id, "ref"))
-		return &ath79_ref_clk;
-
-	if (!strcmp(id, "cpu"))
-		return &ath79_cpu_clk;
-
-	if (!strcmp(id, "ddr"))
-		return &ath79_ddr_clk;
-
-	if (!strcmp(id, "ahb"))
-		return &ath79_ahb_clk;
+	struct clk *clk;
+	unsigned long rate;
 
-	if (!strcmp(id, "wdt"))
-		return &ath79_wdt_clk;
+	clk = clk_get(NULL, id);
+	if (IS_ERR(clk))
+		panic("unable to get %s clock, err=%d", id, (int) PTR_ERR(clk));
 
-	if (!strcmp(id, "uart"))
-		return &ath79_uart_clk;
+	rate = clk_get_rate(clk);
+	clk_put(clk);
 
-	return ERR_PTR(-ENOENT);
+	return rate;
 }
-EXPORT_SYMBOL(clk_get);
 
+/*
+ * Linux clock API
+ */
 int clk_enable(struct clk *clk)
 {
 	return 0;
@@ -443,8 +488,3 @@ unsigned long clk_get_rate(struct clk *clk)
 	return clk->rate;
 }
 EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
diff --git a/arch/mips/ath79/common.h b/arch/mips/ath79/common.h
index 561906c..648d2da 100644
--- a/arch/mips/ath79/common.h
+++ b/arch/mips/ath79/common.h
@@ -21,6 +21,8 @@
 #define ATH79_MEM_SIZE_MAX	(128 * 1024 * 1024)
 
 void ath79_clocks_init(void);
+unsigned long ath79_get_sys_clk_rate(const char *id);
+
 void ath79_ddr_wb_flush(unsigned int reg);
 
 void ath79_gpio_function_enable(u32 mask);
diff --git a/arch/mips/ath79/dev-common.c b/arch/mips/ath79/dev-common.c
index a3a2741..516225d 100644
--- a/arch/mips/ath79/dev-common.c
+++ b/arch/mips/ath79/dev-common.c
@@ -20,7 +20,6 @@
 
 #include <asm/mach-ath79/ath79.h>
 #include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ar933x_uart_platform.h>
 #include "common.h"
 #include "dev-common.h"
 
@@ -68,34 +67,27 @@ static struct resource ar933x_uart_resources[] = {
 	},
 };
 
-static struct ar933x_uart_platform_data ar933x_uart_data;
 static struct platform_device ar933x_uart_device = {
 	.name		= "ar933x-uart",
 	.id		= -1,
 	.resource	= ar933x_uart_resources,
 	.num_resources	= ARRAY_SIZE(ar933x_uart_resources),
-	.dev = {
-		.platform_data	= &ar933x_uart_data,
-	},
 };
 
 void __init ath79_register_uart(void)
 {
-	struct clk *clk;
+	unsigned long uart_clk_rate;
 
-	clk = clk_get(NULL, "uart");
-	if (IS_ERR(clk))
-		panic("unable to get UART clock, err=%ld", PTR_ERR(clk));
+	uart_clk_rate = ath79_get_sys_clk_rate("uart");
 
 	if (soc_is_ar71xx() ||
 	    soc_is_ar724x() ||
 	    soc_is_ar913x() ||
 	    soc_is_ar934x() ||
 	    soc_is_qca955x()) {
-		ath79_uart_data[0].uartclk = clk_get_rate(clk);
+		ath79_uart_data[0].uartclk = uart_clk_rate;
 		platform_device_register(&ath79_uart_device);
 	} else if (soc_is_ar933x()) {
-		ar933x_uart_data.uartclk = clk_get_rate(clk);
 		platform_device_register(&ar933x_uart_device);
 	} else {
 		BUG();
diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c
index 80f4ecd..64807a4 100644
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -200,7 +200,6 @@ void __init plat_mem_setup(void)
 
 	ath79_detect_sys_type();
 	detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
-	ath79_clocks_init();
 
 	_machine_restart = ath79_restart;
 	_machine_halt = ath79_halt;
@@ -209,13 +208,25 @@ void __init plat_mem_setup(void)
 
 void __init plat_time_init(void)
 {
-	struct clk *clk;
+	unsigned long cpu_clk_rate;
+	unsigned long ahb_clk_rate;
+	unsigned long ddr_clk_rate;
+	unsigned long ref_clk_rate;
+
+	ath79_clocks_init();
+
+	cpu_clk_rate = ath79_get_sys_clk_rate("cpu");
+	ahb_clk_rate = ath79_get_sys_clk_rate("ahb");
+	ddr_clk_rate = ath79_get_sys_clk_rate("ddr");
+	ref_clk_rate = ath79_get_sys_clk_rate("ref");
 
-	clk = clk_get(NULL, "cpu");
-	if (IS_ERR(clk))
-		panic("unable to get CPU clock, err=%ld", PTR_ERR(clk));
+	pr_info("Clocks: CPU:%lu.%03luMHz, DDR:%lu.%03luMHz, AHB:%lu.%03luMHz, Ref:%lu.%03luMHz",
+		cpu_clk_rate / 1000000, (cpu_clk_rate / 1000) % 1000,
+		ddr_clk_rate / 1000000, (ddr_clk_rate / 1000) % 1000,
+		ahb_clk_rate / 1000000, (ahb_clk_rate / 1000) % 1000,
+		ref_clk_rate / 1000000, (ref_clk_rate / 1000) % 1000);
 
-	mips_hpt_frequency = clk_get_rate(clk) / 2;
+	mips_hpt_frequency = cpu_clk_rate / 2;
 }
 
 static int __init ath79_setup(void)
diff --git a/arch/mips/bcm47xx/Makefile b/arch/mips/bcm47xx/Makefile
index f3bf6d5..c52daf9 100644
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -4,4 +4,5 @@
 #
 
 obj-y				+= irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
+obj-y				+= board.o
 obj-$(CONFIG_BCM47XX_SSB)	+= wgt634u.o
diff --git a/arch/mips/bcm47xx/board.c b/arch/mips/bcm47xx/board.c
new file mode 100644
index 0000000..f3f6bfe
--- /dev/null
+++ b/arch/mips/bcm47xx/board.c
@@ -0,0 +1,309 @@
+#include <linux/export.h>
+#include <linux/string.h>
+#include <bcm47xx_board.h>
+#include <bcm47xx_nvram.h>
+
+struct bcm47xx_board_type {
+	const enum bcm47xx_board board;
+	const char *name;
+};
+
+struct bcm47xx_board_type_list1 {
+	struct bcm47xx_board_type board;
+	const char *value1;
+};
+
+struct bcm47xx_board_type_list2 {
+	struct bcm47xx_board_type board;
+	const char *value1;
+	const char *value2;
+};
+
+struct bcm47xx_board_type_list3 {
+	struct bcm47xx_board_type board;
+	const char *value1;
+	const char *value2;
+	const char *value3;
+};
+
+struct bcm47xx_board_store {
+	enum bcm47xx_board board;
+	char name[BCM47XX_BOARD_MAX_NAME];
+};
+
+/* model_name */
+static const
+struct bcm47xx_board_type_list1 bcm47xx_board_list_model_name[] __initconst = {
+	{{BCM47XX_BOARD_DLINK_DIR130, "D-Link DIR-130"}, "DIR-130"},
+	{{BCM47XX_BOARD_DLINK_DIR330, "D-Link DIR-330"}, "DIR-330"},
+	{ {0}, 0},
+};
+
+/* model_no */
+static const
+struct bcm47xx_board_type_list1 bcm47xx_board_list_model_no[] __initconst = {
+	{{BCM47XX_BOARD_ASUS_WL700GE, "Asus WL700"}, "WL700"},
+	{ {0}, 0},
+};
+
+/* machine_name */
+static const
+struct bcm47xx_board_type_list1 bcm47xx_board_list_machine_name[] __initconst = {
+	{{BCM47XX_BOARD_LINKSYS_WRTSL54GS, "Linksys WRTSL54GS"}, "WRTSL54GS"},
+	{ {0}, 0},
+};
+
+/* hardware_version */
+static const
+struct bcm47xx_board_type_list1 bcm47xx_board_list_hardware_version[] __initconst = {
+	{{BCM47XX_BOARD_ASUS_RTN16, "Asus RT-N16"}, "RT-N16-"},
+	{{BCM47XX_BOARD_ASUS_WL320GE, "Asus WL320GE"}, "WL320G-"},
+	{{BCM47XX_BOARD_ASUS_WL330GE, "Asus WL330GE"}, "WL330GE-"},
+	{{BCM47XX_BOARD_ASUS_WL500GD, "Asus WL500GD"}, "WL500gd-"},
+	{{BCM47XX_BOARD_ASUS_WL500GPV1, "Asus WL500GP V1"}, "WL500gp-"},
+	{{BCM47XX_BOARD_ASUS_WL500GPV2, "Asus WL500GP V2"}, "WL500GPV2-"},
+	{{BCM47XX_BOARD_ASUS_WL500W, "Asus WL500W"}, "WL500gW-"},
+	{{BCM47XX_BOARD_ASUS_WL520GC, "Asus WL520GC"}, "WL520GC-"},
+	{{BCM47XX_BOARD_ASUS_WL520GU, "Asus WL520GU"}, "WL520GU-"},
+	{{BCM47XX_BOARD_BELKIN_F7D4301, "Belkin F7D4301"}, "F7D4301"},
+	{ {0}, 0},
+};
+
+/* productid */
+static const
+struct bcm47xx_board_type_list1 bcm47xx_board_list_productid[] __initconst = {
+	{{BCM47XX_BOARD_ASUS_RTAC66U, "Asus RT-AC66U"}, "RT-AC66U"},
+	{{BCM47XX_BOARD_ASUS_RTN10, "Asus RT-N10"}, "RT-N10"},
+	{{BCM47XX_BOARD_ASUS_RTN10D, "Asus RT-N10D"}, "RT-N10D"},
+	{{BCM47XX_BOARD_ASUS_RTN10U, "Asus RT-N10U"}, "RT-N10U"},
+	{{BCM47XX_BOARD_ASUS_RTN12, "Asus RT-N12"}, "RT-N12"},
+	{{BCM47XX_BOARD_ASUS_RTN12B1, "Asus RT-N12B1"}, "RT-N12B1"},
+	{{BCM47XX_BOARD_ASUS_RTN12C1, "Asus RT-N12C1"}, "RT-N12C1"},
+	{{BCM47XX_BOARD_ASUS_RTN12D1, "Asus RT-N12D1"}, "RT-N12D1"},
+	{{BCM47XX_BOARD_ASUS_RTN12HP, "Asus RT-N12HP"}, "RT-N12HP"},
+	{{BCM47XX_BOARD_ASUS_RTN15U, "Asus RT-N15U"}, "RT-N15U"},
+	{{BCM47XX_BOARD_ASUS_RTN16, "Asus RT-N16"}, "RT-N16"},
+	{{BCM47XX_BOARD_ASUS_RTN53, "Asus RT-N53"}, "RT-N53"},
+	{{BCM47XX_BOARD_ASUS_RTN66U, "Asus RT-N66U"}, "RT-N66U"},
+	{{BCM47XX_BOARD_ASUS_WL300G, "Asus WL300G"}, "WL300g"},
+	{{BCM47XX_BOARD_ASUS_WLHDD, "Asus WLHDD"}, "WLHDD"},
+	{ {0}, 0},
+};
+
+/* ModelId */
+static const
+struct bcm47xx_board_type_list1 bcm47xx_board_list_ModelId[] __initconst = {
+	{{BCM47XX_BOARD_DELL_TM2300, "Dell WX-5565"}, "WX-5565"},
+	{{BCM47XX_BOARD_MOTOROLA_WE800G, "Motorola WE800G"}, "WE800G"},
+	{{BCM47XX_BOARD_MOTOROLA_WR850GP, "Motorola WR850GP"}, "WR850GP"},
+	{{BCM47XX_BOARD_MOTOROLA_WR850GV2V3, "Motorola WR850G"}, "WR850G"},
+	{ {0}, 0},
+};
+
+/* melco_id or buf1falo_id */
+static const
+struct bcm47xx_board_type_list1 bcm47xx_board_list_melco_id[] __initconst = {
+	{{BCM47XX_BOARD_BUFFALO_WBR2_G54, "Buffalo WBR2-G54"}, "29bb0332"},
+	{{BCM47XX_BOARD_BUFFALO_WHR2_A54G54, "Buffalo WHR2-A54G54"}, "290441dd"},
+	{{BCM47XX_BOARD_BUFFALO_WHR_G125, "Buffalo WHR-G125"}, "32093"},
+	{{BCM47XX_BOARD_BUFFALO_WHR_G54S, "Buffalo WHR-G54S"}, "30182"},
+	{{BCM47XX_BOARD_BUFFALO_WHR_HP_G54, "Buffalo WHR-HP-G54"}, "30189"},
+	{{BCM47XX_BOARD_BUFFALO_WLA2_G54L, "Buffalo WLA2-G54L"}, "29129"},
+	{{BCM47XX_BOARD_BUFFALO_WZR_G300N, "Buffalo WZR-G300N"}, "31120"},
+	{{BCM47XX_BOARD_BUFFALO_WZR_RS_G54, "Buffalo WZR-RS-G54"}, "30083"},
+	{{BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP, "Buffalo WZR-RS-G54HP"}, "30103"},
+	{ {0}, 0},
+};
+
+/* boot_hw_model, boot_hw_ver */
+static const
+struct bcm47xx_board_type_list2 bcm47xx_board_list_boot_hw[] __initconst = {
+	/* like WRT160N v3.0 */
+	{{BCM47XX_BOARD_CISCO_M10V1, "Cisco M10"}, "M10", "1.0"},
+	/* like WRT310N v2.0 */
+	{{BCM47XX_BOARD_CISCO_M20V1, "Cisco M20"}, "M20", "1.0"},
+	{{BCM47XX_BOARD_LINKSYS_E900V1, "Linksys E900 V1"}, "E900", "1.0"},
+	/* like WRT160N v3.0 */
+	{{BCM47XX_BOARD_LINKSYS_E1000V1, "Linksys E1000 V1"}, "E100", "1.0"},
+	{{BCM47XX_BOARD_LINKSYS_E1000V2, "Linksys E1000 V2"}, "E1000", "2.0"},
+	{{BCM47XX_BOARD_LINKSYS_E1000V21, "Linksys E1000 V2.1"}, "E1000", "2.1"},
+	{{BCM47XX_BOARD_LINKSYS_E1200V2, "Linksys E1200 V2"}, "E1200", "2.0"},
+	{{BCM47XX_BOARD_LINKSYS_E2000V1, "Linksys E2000 V1"}, "Linksys E2000", "1.0"},
+	/* like WRT610N v2.0 */
+	{{BCM47XX_BOARD_LINKSYS_E3000V1, "Linksys E3000 V1"}, "E300", "1.0"},
+	{{BCM47XX_BOARD_LINKSYS_E3200V1, "Linksys E3200 V1"}, "E3200", "1.0"},
+	{{BCM47XX_BOARD_LINKSYS_E4200V1, "Linksys E4200 V1"}, "E4200", "1.0"},
+	{{BCM47XX_BOARD_LINKSYS_WRT150NV11, "Linksys WRT150N V1.1"}, "WRT150N", "1.1"},
+	{{BCM47XX_BOARD_LINKSYS_WRT150NV1, "Linksys WRT150N V1"}, "WRT150N", "1"},
+	{{BCM47XX_BOARD_LINKSYS_WRT160NV1, "Linksys WRT160N V1"}, "WRT160N", "1.0"},
+	{{BCM47XX_BOARD_LINKSYS_WRT160NV3, "Linksys WRT160N V3"}, "WRT160N", "3.0"},
+	{{BCM47XX_BOARD_LINKSYS_WRT300NV11, "Linksys WRT300N V1.1"}, "WRT300N", "1.1"},
+	{{BCM47XX_BOARD_LINKSYS_WRT310NV1, "Linksys WRT310N V1"}, "WRT310N", "1.0"},
+	{{BCM47XX_BOARD_LINKSYS_WRT310NV2, "Linksys WRT310N V2"}, "WRT310N", "2.0"},
+	{{BCM47XX_BOARD_LINKSYS_WRT54G3GV2, "Linksys WRT54G3GV2-VF"}, "WRT54G3GV2-VF", "1.0"},
+	{{BCM47XX_BOARD_LINKSYS_WRT610NV1, "Linksys WRT610N V1"}, "WRT610N", "1.0"},
+	{{BCM47XX_BOARD_LINKSYS_WRT610NV2, "Linksys WRT610N V2"}, "WRT610N", "2.0"},
+	{ {0}, 0},
+};
+
+/* board_id */
+static const
+struct bcm47xx_board_type_list1 bcm47xx_board_list_board_id[] __initconst = {
+	{{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNDR3300, "Netgear WNDR3300"}, "U12H093T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNDR3400V1, "Netgear WNDR3400 V1"}, "U12H155T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNDR3400V2, "Netgear WNDR3400 V2"}, "U12H187T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNDR3400VCNA, "Netgear WNDR3400 Vcna"}, "U12H155T01_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNDR3700V3, "Netgear WNDR3700 V3"}, "U12H194T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNDR4000, "Netgear WNDR4000"}, "U12H181T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNDR4500V1, "Netgear WNDR4500 V1"}, "U12H189T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNDR4500V2, "Netgear WNDR4500 V2"}, "U12H224T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNR2000, "Netgear WNR2000"}, "U12H114T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "U12H136T99_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNR3500U, "Netgear WNR3500U"}, "U12H136T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNR3500V2, "Netgear WNR3500 V2"}, "U12H127T00_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNR3500V2VC, "Netgear WNR3500 V2vc"}, "U12H127T70_NETGEAR"},
+	{{BCM47XX_BOARD_NETGEAR_WNR834BV2, "Netgear WNR834B V2"}, "U12H081T00_NETGEAR"},
+	{ {0}, 0},
+};
+
+/* boardtype, boardnum, boardrev */
+static const
+struct bcm47xx_board_type_list3 bcm47xx_board_list_board[] __initconst = {
+	{{BCM47XX_BOARD_HUAWEI_E970, "Huawei E970"}, "0x048e", "0x5347", "0x11"},
+	{{BCM47XX_BOARD_PHICOMM_M1, "Phicomm M1"}, "0x0590", "80", "0x1104"},
+	{{BCM47XX_BOARD_ZTE_H218N, "ZTE H218N"}, "0x053d", "1234", "0x1305"},
+	{ {0}, 0},
+};
+
+static const
+struct bcm47xx_board_type bcm47xx_board_unknown[] __initconst = {
+	{BCM47XX_BOARD_UNKNOWN, "Unknown Board"},
+};
+
+static struct bcm47xx_board_store bcm47xx_board = {BCM47XX_BOARD_NO, "Unknown Board"};
+
+static __init const struct bcm47xx_board_type *bcm47xx_board_get_nvram(void)
+{
+	char buf1[30];
+	char buf2[30];
+	char buf3[30];
+	const struct bcm47xx_board_type_list1 *e1;
+	const struct bcm47xx_board_type_list2 *e2;
+	const struct bcm47xx_board_type_list3 *e3;
+
+	if (bcm47xx_nvram_getenv("model_name", buf1, sizeof(buf1)) >= 0) {
+		for (e1 = bcm47xx_board_list_model_name; e1->value1; e1++) {
+			if (!strcmp(buf1, e1->value1))
+				return &e1->board;
+		}
+	}
+
+	if (bcm47xx_nvram_getenv("model_no", buf1, sizeof(buf1)) >= 0) {
+		for (e1 = bcm47xx_board_list_model_no; e1->value1; e1++) {
+			if (strstarts(buf1, e1->value1))
+				return &e1->board;
+		}
+	}
+
+	if (bcm47xx_nvram_getenv("machine_name", buf1, sizeof(buf1)) >= 0) {
+		for (e1 = bcm47xx_board_list_machine_name; e1->value1; e1++) {
+			if (strstarts(buf1, e1->value1))
+				return &e1->board;
+		}
+	}
+
+	if (bcm47xx_nvram_getenv("hardware_version", buf1, sizeof(buf1)) >= 0) {
+		for (e1 = bcm47xx_board_list_hardware_version; e1->value1; e1++) {
+			if (strstarts(buf1, e1->value1))
+				return &e1->board;
+		}
+	}
+
+	if (bcm47xx_nvram_getenv("productid", buf1, sizeof(buf1)) >= 0) {
+		for (e1 = bcm47xx_board_list_productid; e1->value1; e1++) {
+			if (!strcmp(buf1, e1->value1))
+				return &e1->board;
+		}
+	}
+
+	if (bcm47xx_nvram_getenv("ModelId", buf1, sizeof(buf1)) >= 0) {
+		for (e1 = bcm47xx_board_list_ModelId; e1->value1; e1++) {
+			if (!strcmp(buf1, e1->value1))
+				return &e1->board;
+		}
+	}
+
+	if (bcm47xx_nvram_getenv("melco_id", buf1, sizeof(buf1)) >= 0 ||
+	    bcm47xx_nvram_getenv("buf1falo_id", buf1, sizeof(buf1)) >= 0) {
+		/* buffalo hardware, check id for specific hardware matches */
+		for (e1 = bcm47xx_board_list_melco_id; e1->value1; e1++) {
+			if (!strcmp(buf1, e1->value1))
+				return &e1->board;
+		}
+	}
+
+	if (bcm47xx_nvram_getenv("boot_hw_model", buf1, sizeof(buf1)) >= 0 &&
+	    bcm47xx_nvram_getenv("boot_hw_ver", buf2, sizeof(buf2)) >= 0) {
+		for (e2 = bcm47xx_board_list_boot_hw; e2->value1; e2++) {
+			if (!strcmp(buf1, e2->value1) &&
+			    !strcmp(buf2, e2->value2))
+				return &e2->board;
+		}
+	}
+
+	if (bcm47xx_nvram_getenv("board_id", buf1, sizeof(buf1)) >= 0) {
+		for (e1 = bcm47xx_board_list_board_id; e1->value1; e1++) {
+			if (!strcmp(buf1, e1->value1))
+				return &e1->board;
+		}
+	}
+
+	if (bcm47xx_nvram_getenv("boardtype", buf1, sizeof(buf1)) >= 0 &&
+	    bcm47xx_nvram_getenv("boardnum", buf2, sizeof(buf2)) >= 0 &&
+	    bcm47xx_nvram_getenv("boardrev", buf3, sizeof(buf3)) >= 0) {
+		for (e3 = bcm47xx_board_list_board; e3->value1; e3++) {
+			if (!strcmp(buf1, e3->value1) &&
+			    !strcmp(buf2, e3->value2) &&
+			    !strcmp(buf3, e3->value3))
+				return &e3->board;
+		}
+	}
+	return bcm47xx_board_unknown;
+}
+
+void __init bcm47xx_board_detect(void)
+{
+	int err;
+	char buf[10];
+	const struct bcm47xx_board_type *board_detected;
+
+	if (bcm47xx_board.board != BCM47XX_BOARD_NO)
+		return;
+
+	/* check if the nvram is available */
+	err = bcm47xx_nvram_getenv("boardtype", buf, sizeof(buf));
+
+	/* init of nvram failed, probably too early now */
+	if (err == -ENXIO) {
+		return;
+	}
+
+	board_detected = bcm47xx_board_get_nvram();
+	bcm47xx_board.board = board_detected->board;
+	strlcpy(bcm47xx_board.name, board_detected->name,
+		BCM47XX_BOARD_MAX_NAME);
+}
+
+enum bcm47xx_board bcm47xx_board_get(void)
+{
+	return bcm47xx_board.board;
+}
+EXPORT_SYMBOL(bcm47xx_board_get);
+
+const char *bcm47xx_board_get_name(void)
+{
+	return bcm47xx_board.name;
+}
+EXPORT_SYMBOL(bcm47xx_board_get_name);
diff --git a/arch/mips/bcm47xx/nvram.c b/arch/mips/bcm47xx/nvram.c
index cc40b74..b4c585b 100644
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -190,3 +190,23 @@ int bcm47xx_nvram_getenv(char *name, char *val, size_t val_len)
 	return -ENOENT;
 }
 EXPORT_SYMBOL(bcm47xx_nvram_getenv);
+
+int bcm47xx_nvram_gpio_pin(const char *name)
+{
+	int i, err;
+	char nvram_var[10];
+	char buf[30];
+
+	for (i = 0; i < 16; i++) {
+		err = snprintf(nvram_var, sizeof(nvram_var), "gpio%i", i);
+		if (err <= 0)
+			continue;
+		err = bcm47xx_nvram_getenv(nvram_var, buf, sizeof(buf));
+		if (err <= 0)
+			continue;
+		if (!strcmp(name, buf))
+			return i;
+	}
+	return -ENOENT;
+}
+EXPORT_SYMBOL(bcm47xx_nvram_gpio_pin);
diff --git a/arch/mips/bcm47xx/prom.c b/arch/mips/bcm47xx/prom.c
index 8c155af..5cba318 100644
--- a/arch/mips/bcm47xx/prom.c
+++ b/arch/mips/bcm47xx/prom.c
@@ -32,12 +32,37 @@
 #include <asm/bootinfo.h>
 #include <asm/fw/cfe/cfe_api.h>
 #include <asm/fw/cfe/cfe_error.h>
+#include <bcm47xx.h>
+#include <bcm47xx_board.h>
 
 static int cfe_cons_handle;
 
+static u16 get_chip_id(void)
+{
+	switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+	case BCM47XX_BUS_TYPE_SSB:
+		return bcm47xx_bus.ssb.chip_id;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+	case BCM47XX_BUS_TYPE_BCMA:
+		return bcm47xx_bus.bcma.bus.chipinfo.id;
+#endif
+	}
+	return 0;
+}
+
 const char *get_system_type(void)
 {
-	return "Broadcom BCM47XX";
+	static char buf[50];
+	u16 chip_id = get_chip_id();
+
+	snprintf(buf, sizeof(buf),
+		 (chip_id > 0x9999) ? "Broadcom BCM%d (%s)" :
+				      "Broadcom BCM%04X (%s)",
+		 chip_id, bcm47xx_board_get_name());
+
+	return buf;
 }
 
 void prom_putchar(char c)
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index b2246cd..1f30571 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -36,6 +36,7 @@
 #include <asm/time.h>
 #include <bcm47xx.h>
 #include <bcm47xx_nvram.h>
+#include <bcm47xx_board.h>
 
 union bcm47xx_bus bcm47xx_bus;
 EXPORT_SYMBOL(bcm47xx_bus);
@@ -221,6 +222,7 @@ void __init plat_mem_setup(void)
 	_machine_restart = bcm47xx_machine_restart;
 	_machine_halt = bcm47xx_machine_halt;
 	pm_power_off = bcm47xx_machine_halt;
+	bcm47xx_board_detect();
 }
 
 static int __init bcm47xx_register_bus_complete(void)
diff --git a/arch/mips/bcm47xx/time.c b/arch/mips/bcm47xx/time.c
index 536374d..2c85d92 100644
--- a/arch/mips/bcm47xx/time.c
+++ b/arch/mips/bcm47xx/time.c
@@ -27,10 +27,16 @@
 #include <linux/ssb/ssb.h>
 #include <asm/time.h>
 #include <bcm47xx.h>
+#include <bcm47xx_nvram.h>
+#include <bcm47xx_board.h>
 
 void __init plat_time_init(void)
 {
 	unsigned long hz = 0;
+	u16 chip_id = 0;
+	char buf[10];
+	int len;
+	enum bcm47xx_board board = bcm47xx_board_get();
 
 	/*
 	 * Use deterministic values for initial counter interrupt
@@ -43,15 +49,32 @@ void __init plat_time_init(void)
 #ifdef CONFIG_BCM47XX_SSB
 	case BCM47XX_BUS_TYPE_SSB:
 		hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2;
+		chip_id = bcm47xx_bus.ssb.chip_id;
 		break;
 #endif
 #ifdef CONFIG_BCM47XX_BCMA
 	case BCM47XX_BUS_TYPE_BCMA:
 		hz = bcma_cpu_clock(&bcm47xx_bus.bcma.bus.drv_mips) / 2;
+		chip_id = bcm47xx_bus.bcma.bus.chipinfo.id;
 		break;
 #endif
 	}
 
+	if (chip_id == 0x5354) {
+		len = bcm47xx_nvram_getenv("clkfreq", buf, sizeof(buf));
+		if (len >= 0 && !strncmp(buf, "200", 4))
+			hz = 100000000;
+	}
+
+	switch (board) {
+	case BCM47XX_BOARD_ASUS_WL520GC:
+	case BCM47XX_BOARD_ASUS_WL520GU:
+		hz = 100000000;
+		break;
+	default:
+		break;
+	}
+
 	if (!hz)
 		hz = 100000000;
 
diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c
index 7e17374..b713cd6 100644
--- a/arch/mips/bcm63xx/cpu.c
+++ b/arch/mips/bcm63xx/cpu.c
@@ -306,14 +306,14 @@ void __init bcm63xx_cpu_init(void)
 
 	switch (c->cputype) {
 	case CPU_BMIPS3300:
-		if ((read_c0_prid() & 0xff00) != PRID_IMP_BMIPS3300_ALT)
+		if ((read_c0_prid() & PRID_IMP_MASK) != PRID_IMP_BMIPS3300_ALT)
 			__cpu_name[cpu] = "Broadcom BCM6338";
 		/* fall-through */
 	case CPU_BMIPS32:
 		chipid_reg = BCM_6345_PERF_BASE;
 		break;
 	case CPU_BMIPS4350:
-		switch ((read_c0_prid() & 0xff)) {
+		switch ((read_c0_prid() & PRID_REV_MASK)) {
 		case 0x04:
 			chipid_reg = BCM_3368_PERF_BASE;
 			break;
diff --git a/arch/mips/bcm63xx/nvram.c b/arch/mips/bcm63xx/nvram.c
index e652e57..4b50d40 100644
--- a/arch/mips/bcm63xx/nvram.c
+++ b/arch/mips/bcm63xx/nvram.c
@@ -35,6 +35,8 @@ struct bcm963xx_nvram {
 	u32	checksum_high;
 };
 
+#define BCM63XX_DEFAULT_PSI_SIZE	64
+
 static struct bcm963xx_nvram nvram;
 static int mac_addr_used;
 
@@ -114,3 +116,12 @@ int bcm63xx_nvram_get_mac_address(u8 *mac)
 	return 0;
 }
 EXPORT_SYMBOL(bcm63xx_nvram_get_mac_address);
+
+int bcm63xx_nvram_get_psi_size(void)
+{
+	if (nvram.psi_size > 0)
+		return nvram.psi_size;
+
+	return BCM63XX_DEFAULT_PSI_SIZE;
+}
+EXPORT_SYMBOL(bcm63xx_nvram_get_psi_size);
diff --git a/arch/mips/boot/.gitignore b/arch/mips/boot/.gitignore
index f210b09..a73d6e2 100644
--- a/arch/mips/boot/.gitignore
+++ b/arch/mips/boot/.gitignore
@@ -4,3 +4,4 @@ vmlinux.*
 zImage
 zImage.tmp
 calc_vmlinuz_load_addr
+uImage
diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile
index 851261e..1466c00 100644
--- a/arch/mips/boot/Makefile
+++ b/arch/mips/boot/Makefile
@@ -40,3 +40,18 @@ quiet_cmd_srec = OBJCOPY $@
       cmd_srec = $(OBJCOPY) -S -O srec $(strip-flags) $(VMLINUX) $@
 $(obj)/vmlinux.srec: $(VMLINUX) FORCE
 	$(call if_changed,srec)
+
+UIMAGE_LOADADDR  = $(VMLINUX_LOAD_ADDRESS)
+UIMAGE_ENTRYADDR = $(VMLINUX_ENTRY_ADDRESS)
+
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,gzip)
+
+targets += uImage.gz
+$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz FORCE
+	$(call if_changed,uimage,gzip)
+
+targets += uImage
+$(obj)/uImage: $(obj)/uImage.gz FORCE
+	@ln -sf $(notdir $<) $@
+	@echo '  Image $@ is ready'
diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index bb1dbf4..ca0c343 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -25,7 +25,7 @@ KBUILD_CFLAGS := $(LINUXINCLUDE) $(KBUILD_CFLAGS) -D__KERNEL__ \
 
 KBUILD_AFLAGS := $(LINUXINCLUDE) $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
 	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) \
-	-DKERNEL_ENTRY=0x$(shell $(NM) $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | grep " kernel_entry" | cut -f1 -d \ )
+	-DKERNEL_ENTRY=$(VMLINUX_ENTRY_ADDRESS)
 
 targets := head.o decompress.o dbg.o uart-16550.o uart-alchemy.o
 
@@ -37,6 +37,10 @@ vmlinuzobjs-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART16550) += $(obj)/uart-16550.o
 vmlinuzobjs-$(CONFIG_MIPS_ALCHEMY)		   += $(obj)/uart-alchemy.o
 endif
 
+ifdef CONFIG_KERNEL_XZ
+vmlinuzobjs-y += $(obj)/../../lib/ashldi3.o
+endif
+
 targets += vmlinux.bin
 OBJCOPYFLAGS_vmlinux.bin := $(OBJCOPYFLAGS) -O binary -R .comment -S
 $(obj)/vmlinux.bin: $(KBUILD_IMAGE) FORCE
@@ -44,8 +48,10 @@ $(obj)/vmlinux.bin: $(KBUILD_IMAGE) FORCE
 
 tool_$(CONFIG_KERNEL_GZIP)    = gzip
 tool_$(CONFIG_KERNEL_BZIP2)   = bzip2
+tool_$(CONFIG_KERNEL_LZ4)     = lz4
 tool_$(CONFIG_KERNEL_LZMA)    = lzma
 tool_$(CONFIG_KERNEL_LZO)     = lzo
+tool_$(CONFIG_KERNEL_XZ)      = xzkern
 
 targets += vmlinux.bin.z
 $(obj)/vmlinux.bin.z: $(obj)/vmlinux.bin FORCE
diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c
index 2c95730..a8c6fd6 100644
--- a/arch/mips/boot/compressed/decompress.c
+++ b/arch/mips/boot/compressed/decompress.c
@@ -43,7 +43,8 @@ void error(char *x)
 /* activate the code for pre-boot environment */
 #define STATIC static
 
-#ifdef CONFIG_KERNEL_GZIP
+#if defined(CONFIG_KERNEL_GZIP) || defined(CONFIG_KERNEL_XZ) || \
+	defined(CONFIG_KERNEL_LZ4)
 void *memcpy(void *dest, const void *src, size_t n)
 {
 	int i;
@@ -54,6 +55,8 @@ void *memcpy(void *dest, const void *src, size_t n)
 		d[i] = s[i];
 	return dest;
 }
+#endif
+#ifdef CONFIG_KERNEL_GZIP
 #include "../../../../lib/decompress_inflate.c"
 #endif
 
@@ -70,6 +73,10 @@ void *memset(void *s, int c, size_t n)
 #include "../../../../lib/decompress_bunzip2.c"
 #endif
 
+#ifdef CONFIG_KERNEL_LZ4
+#include "../../../../lib/decompress_unlz4.c"
+#endif
+
 #ifdef CONFIG_KERNEL_LZMA
 #include "../../../../lib/decompress_unlzma.c"
 #endif
@@ -78,6 +85,10 @@ void *memset(void *s, int c, size_t n)
 #include "../../../../lib/decompress_unlzo.c"
 #endif
 
+#ifdef CONFIG_KERNEL_XZ
+#include "../../../../lib/decompress_unxz.c"
+#endif
+
 void decompress_kernel(unsigned long boot_heap_start)
 {
 	unsigned long zimage_start, zimage_size;
diff --git a/arch/mips/boot/compressed/ld.script b/arch/mips/boot/compressed/ld.script
index 8e6b07c..5a33409 100644
--- a/arch/mips/boot/compressed/ld.script
+++ b/arch/mips/boot/compressed/ld.script
@@ -8,6 +8,9 @@
 
 OUTPUT_ARCH(mips)
 ENTRY(start)
+PHDRS {
+	text PT_LOAD FLAGS(7); /* RWX */
+}
 SECTIONS
 {
 	/* Text and read-only data */
@@ -15,7 +18,7 @@ SECTIONS
 	.text : {
 		*(.text)
 		*(.rodata)
-	}
+	}: text
 	/* End of text section */
 
 	/* Writable data */
diff --git a/arch/mips/boot/dts/include/dt-bindings b/arch/mips/boot/dts/include/dt-bindings
new file mode 120000
index 0000000..08c00e4
--- /dev/null
+++ b/arch/mips/boot/dts/include/dt-bindings
@@ -0,0 +1 @@
+../../../../../include/dt-bindings
\ No newline at end of file
diff --git a/arch/mips/boot/ecoff.h b/arch/mips/boot/ecoff.h
index 83e5c38..7a75ce2 100644
--- a/arch/mips/boot/ecoff.h
+++ b/arch/mips/boot/ecoff.h
@@ -12,7 +12,6 @@ typedef struct filehdr {
 } FILHDR;
 #define FILHSZ	sizeof(FILHDR)
 
-#define OMAGIC		0407
 #define MIPSEBMAGIC	0x160
 #define MIPSELMAGIC	0x162
 
diff --git a/arch/mips/cavium-octeon/csrc-octeon.c b/arch/mips/cavium-octeon/csrc-octeon.c
index 0219395..b752c4e 100644
--- a/arch/mips/cavium-octeon/csrc-octeon.c
+++ b/arch/mips/cavium-octeon/csrc-octeon.c
@@ -12,6 +12,7 @@
 #include <linux/smp.h>
 
 #include <asm/cpu-info.h>
+#include <asm/cpu-type.h>
 #include <asm/time.h>
 
 #include <asm/octeon/octeon.h>
diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c
index 9d36774..25fbfae 100644
--- a/arch/mips/cavium-octeon/octeon-irq.c
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@@ -1776,7 +1776,7 @@ asmlinkage void plat_irq_dispatch(void)
 
 #ifdef CONFIG_HOTPLUG_CPU
 
-void fixup_irqs(void)
+void octeon_fixup_irqs(void)
 {
 	irq_cpu_offline();
 }
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index 48b08eb..331b837 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -8,6 +8,7 @@
  *   written by Ralf Baechle <ralf@linux-mips.org>
  */
 #include <linux/compiler.h>
+#include <linux/vmalloc.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/console.h>
@@ -998,7 +999,7 @@ void __init plat_mem_setup(void)
 
 	if (total == 0)
 		panic("Unable to allocate memory from "
-		      "cvmx_bootmem_phy_alloc\n");
+		      "cvmx_bootmem_phy_alloc");
 }
 
 /*
@@ -1080,7 +1081,7 @@ void __init device_tree_init(void)
 	/* Copy the default tree from init memory. */
 	initial_boot_params = early_init_dt_alloc_memory_arch(dt_size, 8);
 	if (initial_boot_params == NULL)
-		panic("Could not allocate initial_boot_params\n");
+		panic("Could not allocate initial_boot_params");
 	memcpy(initial_boot_params, fdt, dt_size);
 
 	if (do_prune) {
@@ -1139,3 +1140,30 @@ static int __init edac_devinit(void)
 	return err;
 }
 device_initcall(edac_devinit);
+
+static void __initdata *octeon_dummy_iospace;
+
+static int __init octeon_no_pci_init(void)
+{
+	/*
+	 * Initially assume there is no PCI. The PCI/PCIe platform code will
+	 * later re-initialize these to correct values if they are present.
+	 */
+	octeon_dummy_iospace = vzalloc(IO_SPACE_LIMIT);
+	set_io_port_base((unsigned long)octeon_dummy_iospace);
+	ioport_resource.start = MAX_RESOURCE;
+	ioport_resource.end = 0;
+	return 0;
+}
+core_initcall(octeon_no_pci_init);
+
+static int __init octeon_no_pci_release(void)
+{
+	/*
+	 * Release the allocated memory if a real IO space is there.
+	 */
+	if ((unsigned long)octeon_dummy_iospace != mips_io_port_base)
+		vfree(octeon_dummy_iospace);
+	return 0;
+}
+late_initcall(octeon_no_pci_release);
diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c
index 138cc80..24a2167 100644
--- a/arch/mips/cavium-octeon/smp.c
+++ b/arch/mips/cavium-octeon/smp.c
@@ -255,8 +255,6 @@ static void octeon_cpus_done(void)
 /* State of each CPU. */
 DEFINE_PER_CPU(int, cpu_state);
 
-extern void fixup_irqs(void);
-
 static int octeon_cpu_disable(void)
 {
 	unsigned int cpu = smp_processor_id();
@@ -267,7 +265,7 @@ static int octeon_cpu_disable(void)
 	set_cpu_online(cpu, false);
 	cpu_clear(cpu, cpu_callin_map);
 	local_irq_disable();
-	fixup_irqs();
+	octeon_fixup_irqs();
 	local_irq_enable();
 
 	flush_cache_all();
diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile
index 61a334a..558e949 100644
--- a/arch/mips/cobalt/Makefile
+++ b/arch/mips/cobalt/Makefile
@@ -5,5 +5,4 @@
 obj-y := buttons.o irq.o lcd.o led.o reset.o rtc.o serial.o setup.o time.o
 
 obj-$(CONFIG_PCI)		+= pci.o
-obj-$(CONFIG_EARLY_PRINTK)	+= console.o
 obj-$(CONFIG_MTD_PHYSMAP)	+= mtd.o
diff --git a/arch/mips/cobalt/console.c b/arch/mips/cobalt/console.c
deleted file mode 100644
index d1ba701..0000000
--- a/arch/mips/cobalt/console.c
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * (C) P. Horton 2006
- */
-#include <linux/io.h>
-#include <linux/serial_reg.h>
-
-#include <cobalt.h>
-
-#define UART_BASE	((void __iomem *)CKSEG1ADDR(0x1c800000))
-
-void prom_putchar(char c)
-{
-	if (cobalt_board_id <= COBALT_BRD_ID_QUBE1)
-		return;
-
-	while (!(readb(UART_BASE + UART_LSR) & UART_LSR_THRE))
-		;
-
-	writeb(c, UART_BASE + UART_TX);
-}
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
index ec3b2c4..9a8c2fe 100644
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -17,6 +17,7 @@
 
 #include <asm/bootinfo.h>
 #include <asm/reboot.h>
+#include <asm/setup.h>
 #include <asm/gt64120.h>
 
 #include <cobalt.h>
@@ -112,6 +113,8 @@ void __init prom_init(void)
 	}
 
 	add_memory_region(0x0, memsz, BOOT_MEM_RAM);
+
+	setup_8250_early_printk_port(CKSEG1ADDR(0x1c800000), 0, 0);
 }
 
 void __init prom_free_prom_memory(void)
diff --git a/arch/mips/configs/powertv_defconfig b/arch/mips/configs/powertv_defconfig
deleted file mode 100644
index 7fda0ce5f..0000000
--- a/arch/mips/configs/powertv_defconfig
+++ /dev/null
@@ -1,136 +0,0 @@
-CONFIG_POWERTV=y
-CONFIG_BOOTLOADER_FAMILY="R2"
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HZ_1000=y
-CONFIG_PREEMPT=y
-# CONFIG_SECCOMP is not set
-CONFIG_EXPERIMENTAL=y
-CONFIG_CROSS_COMPILE=""
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_RD_GZIP is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_PCSPKR_PLATFORM is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLUB_DEBUG is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=y
-CONFIG_INET6_ESP=y
-CONFIG_INET6_IPCOMP=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-CONFIG_IPV6_TUNNEL=y
-CONFIG_NETFILTER=y
-# CONFIG_BRIDGE_NETFILTER is not set
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_ARPTABLES=y
-CONFIG_IP_NF_ARPFILTER=y
-CONFIG_IP6_NF_IPTABLES=y
-CONFIG_IP6_NF_FILTER=y
-CONFIG_BRIDGE=y
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_TBF=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_WLAN is not set
-CONFIG_USB_RTL8150=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-# CONFIG_VGA_ARB is not set
-CONFIG_USB_HIDDEV=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_SERIAL_CP210X=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_FUSE_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_EARLY_PRINTK is not set
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/mips/configs/xway_defconfig b/arch/mips/configs/xway_defconfig
new file mode 100644
index 0000000..8987846
--- /dev/null
+++ b/arch/mips/configs/xway_defconfig
@@ -0,0 +1,159 @@
+CONFIG_LANTIQ=y
+CONFIG_XRX200_PHY_FW=y
+CONFIG_CPU_MIPS32_R2=y
+# CONFIG_COMPACTION is not set
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_HZ_100=y
+# CONFIG_SECCOMP is not set
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_RD_GZIP is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_COREDUMP is not set
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_WESTWOOD is not set
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_BRIDGE_NETFILTER is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NF_CONNTRACK_IPV4=m
+# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_RAW=m
+CONFIG_BRIDGE=y
+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
+CONFIG_VLAN_8021Q=y
+CONFIG_NET_SCHED=y
+CONFIG_HAMRADIO=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_LANTIQ=y
+CONFIG_EEPROM_93CX6=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_LANTIQ_ETOP=y
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_PHYLIB=y
+CONFIG_PPP=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOE=m
+CONFIG_PPP_ASYNC=m
+CONFIG_ISDN=y
+CONFIG_INPUT=m
+CONFIG_INPUT_POLLDEV=m
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_GPIO_MM_LANTIQ=y
+CONFIG_GPIO_STP_XWAY=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_HID is not set
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DEBUG=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_STAGING=y
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_XATTR=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+# CONFIG_JFFS2_FS_POSIX_ACL is not set
+# CONFIG_JFFS2_FS_SECURITY is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+# CONFIG_JFFS2_ZLIB is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_ZLIB is not set
+CONFIG_SQUASHFS_XZ=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_FTRACE is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32_SARWATE=y
+CONFIG_AVERAGE=y
diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S
index 22afed1..41a2fa1 100644
--- a/arch/mips/dec/int-handler.S
+++ b/arch/mips/dec/int-handler.S
@@ -118,7 +118,7 @@
  *	       7	FPU/R4k timer
  *
  * We handle the IRQ according to _our_ priority (see setup.c),
- * then we just return.	 If multiple IRQs are pending then we will
+ * then we just return.  If multiple IRQs are pending then we will
  * just take another exception, big deal.
  */
 		.align	5
@@ -146,7 +146,7 @@
 		/*
 		 * Find irq with highest priority
 		 */
-		 PTR_LA t1,cpu_mask_nr_tbl
+		 PTR_LA	t1,cpu_mask_nr_tbl
 1:		lw	t2,(t1)
 		nop
 		and	t2,t0
@@ -195,7 +195,7 @@
 		/*
 		 * Find irq with highest priority
 		 */
-		 PTR_LA t1,asic_mask_nr_tbl
+		 PTR_LA	t1,asic_mask_nr_tbl
 2:		lw	t2,(t1)
 		nop
 		and	t2,t0
@@ -221,7 +221,7 @@
 		FEXPORT(cpu_all_int)		# HALT, timers, software junk
 		li	a0,DEC_CPU_IRQ_BASE
 		srl	t0,CAUSEB_IP
-		li	t1,CAUSEF_IP>>CAUSEB_IP # mask
+		li	t1,CAUSEF_IP>>CAUSEB_IP	# mask
 		b	1f
 		 li	t2,4			# nr of bits / 2
 
diff --git a/arch/mips/dec/ioasic-irq.c b/arch/mips/dec/ioasic-irq.c
index 824e08c..e04d973 100644
--- a/arch/mips/dec/ioasic-irq.c
+++ b/arch/mips/dec/ioasic-irq.c
@@ -1,7 +1,7 @@
 /*
  *	DEC I/O ASIC interrupts.
  *
- *	Copyright (c) 2002, 2003  Maciej W. Rozycki
+ *	Copyright (c) 2002, 2003, 2013  Maciej W. Rozycki
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -51,14 +51,51 @@ static struct irq_chip ioasic_irq_type = {
 	.irq_unmask = unmask_ioasic_irq,
 };
 
+static void clear_ioasic_dma_irq(struct irq_data *d)
+{
+	u32 sir;
+
+	sir = ~(1 << (d->irq - ioasic_irq_base));
+	ioasic_write(IO_REG_SIR, sir);
+	fast_iob();
+}
+
 static struct irq_chip ioasic_dma_irq_type = {
 	.name = "IO-ASIC-DMA",
-	.irq_ack = ack_ioasic_irq,
+	.irq_ack = clear_ioasic_dma_irq,
 	.irq_mask = mask_ioasic_irq,
-	.irq_mask_ack = ack_ioasic_irq,
 	.irq_unmask = unmask_ioasic_irq,
+	.irq_eoi = clear_ioasic_dma_irq,
 };
 
+/*
+ * I/O ASIC implements two kinds of DMA interrupts, informational and
+ * error interrupts.
+ *
+ * The formers do not stop DMA and should be cleared as soon as possible
+ * so that if they retrigger before the handler has completed, usually as
+ * a side effect of actions taken by the handler, then they are reissued.
+ * These use the `handle_edge_irq' handler that clears the request right
+ * away.
+ *
+ * The latters stop DMA and do not resume it until the interrupt has been
+ * cleared.  This cannot be done until after a corrective action has been
+ * taken and this also means they will not retrigger.  Therefore they use
+ * the `handle_fasteoi_irq' handler that only clears the request on the
+ * way out.  Because MIPS processor interrupt inputs, one of which the I/O
+ * ASIC is cascaded to, are level-triggered it is recommended that error
+ * DMA interrupt action handlers are registered with the IRQF_ONESHOT flag
+ * set so that they are run with the interrupt line masked.
+ *
+ * This mask has `1' bits in the positions of informational interrupts.
+ */
+#define IO_IRQ_DMA_INFO							\
+	(IO_IRQ_MASK(IO_INR_SCC0A_RXDMA) |				\
+	 IO_IRQ_MASK(IO_INR_SCC1A_RXDMA) |				\
+	 IO_IRQ_MASK(IO_INR_ISDN_TXDMA) |				\
+	 IO_IRQ_MASK(IO_INR_ISDN_RXDMA) |				\
+	 IO_IRQ_MASK(IO_INR_ASC_DMA))
+
 void __init init_ioasic_irqs(int base)
 {
 	int i;
@@ -71,7 +108,9 @@ void __init init_ioasic_irqs(int base)
 		irq_set_chip_and_handler(i, &ioasic_irq_type,
 					 handle_level_irq);
 	for (; i < base + IO_IRQ_LINES; i++)
-		irq_set_chip(i, &ioasic_dma_irq_type);
+		irq_set_chip_and_handler(i, &ioasic_dma_irq_type,
+					 1 << (i - base) & IO_IRQ_DMA_INFO ?
+					 handle_edge_irq : handle_fasteoi_irq);
 
 	ioasic_irq_base = base;
 }
diff --git a/arch/mips/dec/prom/call_o32.S b/arch/mips/dec/prom/call_o32.S
index c0d1522..8c84981 100644
--- a/arch/mips/dec/prom/call_o32.S
+++ b/arch/mips/dec/prom/call_o32.S
@@ -14,7 +14,7 @@
 
 /* Maximum number of arguments supported.  Must be even!  */
 #define O32_ARGC	32
-/* Number of static registers we save.	*/
+/* Number of static registers we save.  */
 #define O32_STATC	11
 /* Frame size for both of the above.  */
 #define O32_FRAMESZ	(4 * O32_ARGC + SZREG * O32_STATC)
diff --git a/arch/mips/dec/prom/init.c b/arch/mips/dec/prom/init.c
index ab16904..4e1761e 100644
--- a/arch/mips/dec/prom/init.c
+++ b/arch/mips/dec/prom/init.c
@@ -13,6 +13,7 @@
 
 #include <asm/bootinfo.h>
 #include <asm/cpu.h>
+#include <asm/cpu-type.h>
 #include <asm/processor.h>
 
 #include <asm/dec/prom.h>
@@ -103,7 +104,7 @@ void __init prom_init(void)
 	if (prom_is_rex(magic))
 		rex_clear_cache();
 
-	/* Register the early console.	*/
+	/* Register the early console.  */
 	register_prom_console();
 
 	/* Were we compiled with the right CPU option? */
diff --git a/arch/mips/dec/prom/memory.c b/arch/mips/dec/prom/memory.c
index 0aadac7..8c62316 100644
--- a/arch/mips/dec/prom/memory.c
+++ b/arch/mips/dec/prom/memory.c
@@ -22,7 +22,7 @@ volatile unsigned long mem_err;		/* So we know an error occurred */
 
 /*
  * Probe memory in 4MB chunks, waiting for an error to tell us we've fallen
- * off the end of real memory.	Only suitable for the 2100/3100's (PMAX).
+ * off the end of real memory.  Only suitable for the 2100/3100's (PMAX).
  */
 
 #define CHUNK_SIZE 0x400000
diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c
index 741cb42..56e6e2c2 100644
--- a/arch/mips/dec/setup.c
+++ b/arch/mips/dec/setup.c
@@ -65,7 +65,7 @@ EXPORT_SYMBOL(ioasic_base);
 /*
  * IRQ routing and priority tables.  Priorites are set as follows:
  *
- *		KN01	KN230	KN02	KN02-BA KN02-CA KN03
+ *		KN01	KN230	KN02	KN02-BA	KN02-CA	KN03
  *
  * MEMORY	CPU	CPU	CPU	ASIC	CPU	CPU
  * RTC		CPU	CPU	CPU	ASIC	CPU	CPU
@@ -413,7 +413,7 @@ static void __init dec_init_kn02(void)
 
 /*
  * Machine-specific initialisation for KN02-BA, aka DS5000/1xx
- * (xx = 20, 25, 33), aka 3min.	 Also applies to KN04(-BA), aka
+ * (xx = 20, 25, 33), aka 3min.  Also applies to KN04(-BA), aka
  * DS5000/150, aka 4min.
  */
 static int kn02ba_interrupt[DEC_NR_INTS] __initdata = {
diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c
index ea57f39..1914e56 100644
--- a/arch/mips/dec/time.c
+++ b/arch/mips/dec/time.c
@@ -125,13 +125,18 @@ int rtc_mips_set_mmss(unsigned long nowtime)
 
 void __init plat_time_init(void)
 {
+	int ioasic_clock = 0;
 	u32 start, end;
-	int i = HZ / 10;
+	int i = HZ / 8;
 
 	/* Set up the rate of periodic DS1287 interrupts. */
 	ds1287_set_base_clock(HZ);
 
+	/* On some I/O ASIC systems we have the I/O ASIC's counter.  */
+	if (IOASIC)
+		ioasic_clock = dec_ioasic_clocksource_init() == 0;
 	if (cpu_has_counter) {
+		ds1287_timer_state();
 		while (!ds1287_timer_state())
 			;
 
@@ -143,12 +148,24 @@ void __init plat_time_init(void)
 
 		end = read_c0_count();
 
-		mips_hpt_frequency = (end - start) * 10;
+		mips_hpt_frequency = (end - start) * 8;
 		printk(KERN_INFO "MIPS counter frequency %dHz\n",
 			mips_hpt_frequency);
-	} else if (IOASIC)
-		/* For pre-R4k systems we use the I/O ASIC's counter.  */
-		dec_ioasic_clocksource_init();
+
+		/*
+		 * All R4k DECstations suffer from the CP0 Count erratum,
+		 * so we can't use the timer as a clock source, and a clock
+		 * event both at a time.  An accurate wall clock is more
+		 * important than a high-precision interval timer so only
+		 * use the timer as a clock source, and not a clock event
+		 * if there's no I/O ASIC counter available to serve as a
+		 * clock source.
+		 */
+		if (!ioasic_clock) {
+			init_r4k_clocksource();
+			mips_hpt_frequency = 0;
+		}
+	}
 
 	ds1287_clockevent_init(dec_interrupt[DEC_IRQ_RTC]);
 }
diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild
index 9b54b7a..454ddf9 100644
--- a/arch/mips/include/asm/Kbuild
+++ b/arch/mips/include/asm/Kbuild
@@ -1,2 +1,15 @@
 # MIPS headers
+generic-y += cputime.h
+generic-y += current.h
+generic-y += emergency-restart.h
+generic-y += local64.h
+generic-y += mutex.h
+generic-y += parport.h
+generic-y += percpu.h
+generic-y += scatterlist.h
+generic-y += sections.h
+generic-y += segment.h
+generic-y += serial.h
 generic-y += trace_clock.h
+generic-y += ucontext.h
+generic-y += xor.h
diff --git a/arch/mips/include/asm/addrspace.h b/arch/mips/include/asm/addrspace.h
index 13d61c0..3f74545 100644
--- a/arch/mips/include/asm/addrspace.h
+++ b/arch/mips/include/asm/addrspace.h
@@ -58,7 +58,7 @@
 
 /*
  * Memory segments (64bit kernel mode addresses)
- * The compatibility segments use the full 64-bit sign extended value.	Note
+ * The compatibility segments use the full 64-bit sign extended value.  Note
  * the R8000 doesn't have them so don't reference these in generic MIPS code.
  */
 #define XKUSEG			_CONST64_(0x0000000000000000)
@@ -131,7 +131,7 @@
 
 /*
  * The ultimate limited of the 64-bit MIPS architecture:  2 bits for selecting
- * the region, 3 bits for the CCA mode.	 This leaves 59 bits of which the
+ * the region, 3 bits for the CCA mode.  This leaves 59 bits of which the
  * R8000 implements most with its 48-bit physical address space.
  */
 #define TO_PHYS_MASK	_CONST64_(0x07ffffffffffffff)	/* 2^^59 - 1 */
diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h
index 08b6079..7eed2f2 100644
--- a/arch/mips/include/asm/atomic.h
+++ b/arch/mips/include/asm/atomic.h
@@ -1,5 +1,5 @@
 /*
- * Atomic operations that C can't guarantee us.	 Useful for
+ * Atomic operations that C can't guarantee us.  Useful for
  * resource counting etc..
  *
  * But use these as seldom as possible since they are much more slower
diff --git a/arch/mips/include/asm/barrier.h b/arch/mips/include/asm/barrier.h
index 314ab55..f26d8e1 100644
--- a/arch/mips/include/asm/barrier.h
+++ b/arch/mips/include/asm/barrier.h
@@ -18,7 +18,7 @@
  * over this barrier.  All reads preceding this primitive are guaranteed
  * to access memory (but not necessarily other CPUs' caches) before any
  * reads following this primitive that depend on the data return by
- * any of the preceding reads.	This primitive is much lighter weight than
+ * any of the preceding reads.  This primitive is much lighter weight than
  * rmb() on most CPUs, and is never heavier weight than is
  * rmb().
  *
@@ -43,7 +43,7 @@
  * </programlisting>
  *
  * because the read of "*q" depends on the read of "p" and these
- * two reads are separated by a read_barrier_depends().	 However,
+ * two reads are separated by a read_barrier_depends().  However,
  * the following code, with the same initial values for "a" and "b":
  *
  * <programlisting>
@@ -57,7 +57,7 @@
  * </programlisting>
  *
  * does not enforce ordering, since there is no data dependency between
- * the read of "a" and the read of "b".	 Therefore, on some CPUs, such
+ * the read of "a" and the read of "b".  Therefore, on some CPUs, such
  * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
  * in cases like this where there are no data dependencies.
  */
diff --git a/arch/mips/include/asm/bmips.h b/arch/mips/include/asm/bmips.h
index 552a65a..27bd060 100644
--- a/arch/mips/include/asm/bmips.h
+++ b/arch/mips/include/asm/bmips.h
@@ -65,44 +65,33 @@ static inline unsigned long bmips_read_zscm_reg(unsigned int offset)
 {
 	unsigned long ret;
 
-	__asm__ __volatile__(
-		".set push\n"
-		".set noreorder\n"
-		"cache %1, 0(%2)\n"
-		"sync\n"
-		"_ssnop\n"
-		"_ssnop\n"
-		"_ssnop\n"
-		"_ssnop\n"
-		"_ssnop\n"
-		"_ssnop\n"
-		"_ssnop\n"
-		"mfc0 %0, $28, 3\n"
-		"_ssnop\n"
-		".set pop\n"
-		: "=&r" (ret)
-		: "i" (Index_Load_Tag_S), "r" (ZSCM_REG_BASE + offset)
-		: "memory");
+	barrier();
+	cache_op(Index_Load_Tag_S, ZSCM_REG_BASE + offset);
+	__sync();
+	_ssnop();
+	_ssnop();
+	_ssnop();
+	_ssnop();
+	_ssnop();
+	_ssnop();
+	_ssnop();
+	ret = read_c0_ddatalo();
+	_ssnop();
+
 	return ret;
 }
 
 static inline void bmips_write_zscm_reg(unsigned int offset, unsigned long data)
 {
-	__asm__ __volatile__(
-		".set push\n"
-		".set noreorder\n"
-		"mtc0 %0, $28, 3\n"
-		"_ssnop\n"
-		"_ssnop\n"
-		"_ssnop\n"
-		"cache %1, 0(%2)\n"
-		"_ssnop\n"
-		"_ssnop\n"
-		"_ssnop\n"
-		: /* no outputs */
-		: "r" (data),
-		  "i" (Index_Store_Tag_S), "r" (ZSCM_REG_BASE + offset)
-		: "memory");
+	write_c0_ddatalo(data);
+	_ssnop();
+	_ssnop();
+	_ssnop();
+	cache_op(Index_Store_Tag_S, ZSCM_REG_BASE + offset);
+	_ssnop();
+	_ssnop();
+	_ssnop();
+	barrier();
 }
 
 #endif /* !defined(__ASSEMBLY__) */
diff --git a/arch/mips/include/asm/cacheops.h b/arch/mips/include/asm/cacheops.h
index 68f37e3..c75025f 100644
--- a/arch/mips/include/asm/cacheops.h
+++ b/arch/mips/include/asm/cacheops.h
@@ -14,56 +14,52 @@
 /*
  * Cache Operations available on all MIPS processors with R4000-style caches
  */
-#define Index_Invalidate_I	0x00
-#define Index_Writeback_Inv_D	0x01
-#define Index_Load_Tag_I	0x04
-#define Index_Load_Tag_D	0x05
-#define Index_Store_Tag_I	0x08
-#define Index_Store_Tag_D	0x09
-#if defined(CONFIG_CPU_LOONGSON2)
-#define Hit_Invalidate_I	0x00
-#else
-#define Hit_Invalidate_I	0x10
-#endif
-#define Hit_Invalidate_D	0x11
-#define Hit_Writeback_Inv_D	0x15
+#define Index_Invalidate_I		0x00
+#define Index_Writeback_Inv_D		0x01
+#define Index_Load_Tag_I		0x04
+#define Index_Load_Tag_D		0x05
+#define Index_Store_Tag_I		0x08
+#define Index_Store_Tag_D		0x09
+#define Hit_Invalidate_I		0x10
+#define Hit_Invalidate_D		0x11
+#define Hit_Writeback_Inv_D		0x15
 
 /*
  * R4000-specific cacheops
  */
-#define Create_Dirty_Excl_D	0x0d
-#define Fill			0x14
-#define Hit_Writeback_I		0x18
-#define Hit_Writeback_D		0x19
+#define Create_Dirty_Excl_D		0x0d
+#define Fill				0x14
+#define Hit_Writeback_I			0x18
+#define Hit_Writeback_D			0x19
 
 /*
  * R4000SC and R4400SC-specific cacheops
  */
-#define Index_Invalidate_SI	0x02
-#define Index_Writeback_Inv_SD	0x03
-#define Index_Load_Tag_SI	0x06
-#define Index_Load_Tag_SD	0x07
-#define Index_Store_Tag_SI	0x0A
-#define Index_Store_Tag_SD	0x0B
-#define Create_Dirty_Excl_SD	0x0f
-#define Hit_Invalidate_SI	0x12
-#define Hit_Invalidate_SD	0x13
-#define Hit_Writeback_Inv_SD	0x17
-#define Hit_Writeback_SD	0x1b
-#define Hit_Set_Virtual_SI	0x1e
-#define Hit_Set_Virtual_SD	0x1f
+#define Index_Invalidate_SI		0x02
+#define Index_Writeback_Inv_SD		0x03
+#define Index_Load_Tag_SI		0x06
+#define Index_Load_Tag_SD		0x07
+#define Index_Store_Tag_SI		0x0A
+#define Index_Store_Tag_SD		0x0B
+#define Create_Dirty_Excl_SD		0x0f
+#define Hit_Invalidate_SI		0x12
+#define Hit_Invalidate_SD		0x13
+#define Hit_Writeback_Inv_SD		0x17
+#define Hit_Writeback_SD		0x1b
+#define Hit_Set_Virtual_SI		0x1e
+#define Hit_Set_Virtual_SD		0x1f
 
 /*
  * R5000-specific cacheops
  */
-#define R5K_Page_Invalidate_S	0x17
+#define R5K_Page_Invalidate_S		0x17
 
 /*
  * RM7000-specific cacheops
  */
-#define Page_Invalidate_T	0x16
-#define Index_Store_Tag_T	0x0a
-#define Index_Load_Tag_T	0x06
+#define Page_Invalidate_T		0x16
+#define Index_Store_Tag_T		0x0a
+#define Index_Load_Tag_T		0x06
 
 /*
  * R10000-specific cacheops
@@ -71,17 +67,22 @@
  * Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused.
  * Most of the _S cacheops are identical to the R4000SC _SD cacheops.
  */
-#define Index_Writeback_Inv_S	0x03
-#define Index_Load_Tag_S	0x07
-#define Index_Store_Tag_S	0x0B
-#define Hit_Invalidate_S	0x13
-#define Cache_Barrier		0x14
-#define Hit_Writeback_Inv_S	0x17
-#define Index_Load_Data_I	0x18
-#define Index_Load_Data_D	0x19
-#define Index_Load_Data_S	0x1b
-#define Index_Store_Data_I	0x1c
-#define Index_Store_Data_D	0x1d
-#define Index_Store_Data_S	0x1f
+#define Index_Writeback_Inv_S		0x03
+#define Index_Load_Tag_S		0x07
+#define Index_Store_Tag_S		0x0B
+#define Hit_Invalidate_S		0x13
+#define Cache_Barrier			0x14
+#define Hit_Writeback_Inv_S		0x17
+#define Index_Load_Data_I		0x18
+#define Index_Load_Data_D		0x19
+#define Index_Load_Data_S		0x1b
+#define Index_Store_Data_I		0x1c
+#define Index_Store_Data_D		0x1d
+#define Index_Store_Data_S		0x1f
+
+/*
+ * Loongson2-specific cacheops
+ */
+#define Hit_Invalidate_I_Loongson23	0x00
 
 #endif	/* __ASM_CACHEOPS_H */
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index fa44f3e..d445d06 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -13,12 +13,6 @@
 #include <asm/cpu-info.h>
 #include <cpu-feature-overrides.h>
 
-#ifndef current_cpu_type
-#define current_cpu_type()	current_cpu_data.cputype
-#endif
-
-#define boot_cpu_type()		cpu_data[0].cputype
-
 /*
  * SMP assumption: Options of CPU 0 are a superset of all processors.
  * This is true for all known MIPS systems.
@@ -193,7 +187,7 @@
 
 /*
  * MIPS32, MIPS64, VR5500, IDT32332, IDT32334 and maybe a few other
- * pre-MIPS32/MIPS53 processors have CLO, CLZ.	The IDT RC64574 is 64-bit and
+ * pre-MIPS32/MIPS64 processors have CLO, CLZ.	The IDT RC64574 is 64-bit and
  * has CLO and CLZ but not DCLO nor DCLZ.  For 64-bit kernels
  * cpu_has_clo_clz also indicates the availability of DCLO and DCLZ.
  */
diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h
index 41401d8..21c8e29 100644
--- a/arch/mips/include/asm/cpu-info.h
+++ b/arch/mips/include/asm/cpu-info.h
@@ -84,6 +84,7 @@ struct cpuinfo_mips {
 extern struct cpuinfo_mips cpu_data[];
 #define current_cpu_data cpu_data[smp_processor_id()]
 #define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
+#define boot_cpu_data cpu_data[0]
 
 extern void cpu_probe(void);
 extern void cpu_report(void);
diff --git a/arch/mips/include/asm/cpu-type.h b/arch/mips/include/asm/cpu-type.h
new file mode 100644
index 0000000..4a402cc
--- /dev/null
+++ b/arch/mips/include/asm/cpu-type.h
@@ -0,0 +1,203 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2004  Maciej W. Rozycki
+ */
+#ifndef __ASM_CPU_TYPE_H
+#define __ASM_CPU_TYPE_H
+
+#include <linux/smp.h>
+#include <linux/compiler.h>
+
+static inline int __pure __get_cpu_type(const int cpu_type)
+{
+	switch (cpu_type) {
+#if defined(CONFIG_SYS_HAS_CPU_LOONGSON2E) || \
+    defined(CONFIG_SYS_HAS_CPU_LOONGSON2F)
+	case CPU_LOONGSON2:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_LOONGSON1B
+	case CPU_LOONGSON1:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_MIPS32_R1
+	case CPU_4KC:
+	case CPU_ALCHEMY:
+	case CPU_BMIPS3300:
+	case CPU_BMIPS4350:
+	case CPU_PR4450:
+	case CPU_BMIPS32:
+	case CPU_JZRISC:
+#endif
+
+#if defined(CONFIG_SYS_HAS_CPU_MIPS32_R1) || \
+    defined(CONFIG_SYS_HAS_CPU_MIPS32_R2)
+	case CPU_4KEC:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_MIPS32_R2
+	case CPU_4KSC:
+	case CPU_24K:
+	case CPU_34K:
+	case CPU_1004K:
+	case CPU_74K:
+	case CPU_M14KC:
+	case CPU_M14KEC:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_MIPS64_R1
+	case CPU_5KC:
+	case CPU_5KE:
+	case CPU_20KC:
+	case CPU_25KF:
+	case CPU_SB1:
+	case CPU_SB1A:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_MIPS64_R2
+	/*
+	 * All MIPS64 R2 processors have their own special symbols.  That is,
+	 * there currently is no pure R2 core
+	 */
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_R3000
+	case CPU_R2000:
+	case CPU_R3000:
+	case CPU_R3000A:
+	case CPU_R3041:
+	case CPU_R3051:
+	case CPU_R3052:
+	case CPU_R3081:
+	case CPU_R3081E:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_TX39XX
+	case CPU_TX3912:
+	case CPU_TX3922:
+	case CPU_TX3927:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_VR41XX
+	case CPU_VR41XX:
+	case CPU_VR4111:
+	case CPU_VR4121:
+	case CPU_VR4122:
+	case CPU_VR4131:
+	case CPU_VR4133:
+	case CPU_VR4181:
+	case CPU_VR4181A:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_R4300
+	case CPU_R4300:
+	case CPU_R4310:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_R4X00
+	case CPU_R4000PC:
+	case CPU_R4000SC:
+	case CPU_R4000MC:
+	case CPU_R4200:
+	case CPU_R4400PC:
+	case CPU_R4400SC:
+	case CPU_R4400MC:
+	case CPU_R4600:
+	case CPU_R4700:
+	case CPU_R4640:
+	case CPU_R4650:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_TX49XX
+	case CPU_TX49XX:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_R5000
+	case CPU_R5000:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_R5432
+	case CPU_R5432:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_R5500
+	case CPU_R5500:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_R6000
+	case CPU_R6000:
+	case CPU_R6000A:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_NEVADA
+	case CPU_NEVADA:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_R8000
+	case CPU_R8000:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_R10000
+	case CPU_R10000:
+	case CPU_R12000:
+	case CPU_R14000:
+#endif
+#ifdef CONFIG_SYS_HAS_CPU_RM7000
+	case CPU_RM7000:
+	case CPU_SR71000:
+#endif
+#ifdef CONFIG_SYS_HAS_CPU_RM9000
+	case CPU_RM9000:
+#endif
+#ifdef CONFIG_SYS_HAS_CPU_SB1
+	case CPU_SB1:
+	case CPU_SB1A:
+#endif
+#ifdef CONFIG_SYS_HAS_CPU_CAVIUM_OCTEON
+	case CPU_CAVIUM_OCTEON:
+	case CPU_CAVIUM_OCTEON_PLUS:
+	case CPU_CAVIUM_OCTEON2:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_BMIPS4380
+	case CPU_BMIPS4380:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_BMIPS5000
+	case CPU_BMIPS5000:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_XLP
+	case CPU_XLP:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_XLR
+	case CPU_XLR:
+#endif
+		break;
+	default:
+		unreachable();
+	}
+
+	return cpu_type;
+}
+
+static inline int __pure current_cpu_type(void)
+{
+	const int cpu_type = current_cpu_data.cputype;
+
+	return __get_cpu_type(cpu_type);
+}
+
+static inline int __pure boot_cpu_type(void)
+{
+	const int cpu_type = cpu_data[0].cputype;
+
+	return __get_cpu_type(cpu_type);
+}
+
+#endif /* __ASM_CPU_TYPE_H */
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 632bbe5..d2035e1 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -3,15 +3,14 @@
  *	  various MIPS cpu types.
  *
  * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
- * Copyright (C) 2004  Maciej W. Rozycki
+ * Copyright (C) 2004, 2013  Maciej W. Rozycki
  */
 #ifndef _ASM_CPU_H
 #define _ASM_CPU_H
 
-/* Assigned Company values for bits 23:16 of the PRId Register
-   (CP0 register 15, select 0).	 As of the MIPS32 and MIPS64 specs from
-   MTI, the PRId register is defined in this (backwards compatible)
-   way:
+/*
+   As of the MIPS32 and MIPS64 specs from MTI, the PRId register (CP0
+   register 15, select 0) is defined in this (backwards compatible) way:
 
   +----------------+----------------+----------------+----------------+
   | Company Options| Company ID	    | Processor ID   | Revision	      |
@@ -23,6 +22,14 @@
    spec.
 */
 
+#define PRID_OPT_MASK		0xff000000
+
+/*
+ * Assigned Company values for bits 23:16 of the PRId register.
+ */
+
+#define PRID_COMP_MASK		0xff0000
+
 #define PRID_COMP_LEGACY	0x000000
 #define PRID_COMP_MIPS		0x010000
 #define PRID_COMP_BROADCOM	0x020000
@@ -38,10 +45,17 @@
 #define PRID_COMP_INGENIC	0xd00000
 
 /*
- * Assigned values for the product ID register.	 In order to detect a
- * certain CPU type exactly eventually additional registers may need to
- * be examined.	 These are valid when 23:16 == PRID_COMP_LEGACY
+ * Assigned Processor ID (implementation) values for bits 15:8 of the PRId
+ * register.  In order to detect a certain CPU type exactly eventually
+ * additional registers may need to be examined.
  */
+
+#define PRID_IMP_MASK		0xff00
+
+/*
+ * These are valid when 23:16 == PRID_COMP_LEGACY
+ */
+
 #define PRID_IMP_R2000		0x0100
 #define PRID_IMP_AU1_REV1	0x0100
 #define PRID_IMP_AU1_REV2	0x0200
@@ -141,6 +155,9 @@
 #define PRID_IMP_CAVIUM_CN68XX 0x9100
 #define PRID_IMP_CAVIUM_CN66XX 0x9200
 #define PRID_IMP_CAVIUM_CN61XX 0x9300
+#define PRID_IMP_CAVIUM_CNF71XX 0x9400
+#define PRID_IMP_CAVIUM_CN78XX 0x9500
+#define PRID_IMP_CAVIUM_CN70XX 0x9600
 
 /*
  * These are the PRID's for when 23:16 == PRID_COMP_INGENIC
@@ -176,13 +193,18 @@
 
 #define PRID_IMP_NETLOGIC_XLP8XX	0x1000
 #define PRID_IMP_NETLOGIC_XLP3XX	0x1100
+#define PRID_IMP_NETLOGIC_XLP2XX	0x1200
 
 /*
- * Definitions for 7:0 on legacy processors
+ * Particular Revision values for bits 7:0 of the PRId register.
  */
 
 #define PRID_REV_MASK		0x00ff
 
+/*
+ * Definitions for 7:0 on legacy processors
+ */
+
 #define PRID_REV_TX4927		0x0022
 #define PRID_REV_TX4937		0x0030
 #define PRID_REV_R4400		0x0040
@@ -223,6 +245,8 @@
  *  31				   16 15	     8 7	      0
  */
 
+#define FPIR_IMP_MASK		0xff00
+
 #define FPIR_IMP_NONE		0x0000
 
 enum cpu_type_enum {
@@ -272,7 +296,7 @@ enum cpu_type_enum {
 	 */
 	CPU_5KC, CPU_5KE, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
 	CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS, CPU_CAVIUM_OCTEON2,
-	CPU_XLR, CPU_XLP,
+	CPU_CAVIUM_OCTEON3, CPU_XLR, CPU_XLP,
 
 	CPU_LAST
 };
diff --git a/arch/mips/include/asm/cputime.h b/arch/mips/include/asm/cputime.h
deleted file mode 100644
index c00eacb..0000000
--- a/arch/mips/include/asm/cputime.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __MIPS_CPUTIME_H
-#define __MIPS_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __MIPS_CPUTIME_H */
diff --git a/arch/mips/include/asm/current.h b/arch/mips/include/asm/current.h
deleted file mode 100644
index 4c51401..0000000
--- a/arch/mips/include/asm/current.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/current.h>
diff --git a/arch/mips/include/asm/dec/ioasic.h b/arch/mips/include/asm/dec/ioasic.h
index 98badd6..be4d62a 100644
--- a/arch/mips/include/asm/dec/ioasic.h
+++ b/arch/mips/include/asm/dec/ioasic.h
@@ -33,6 +33,6 @@ static inline u32 ioasic_read(unsigned int reg)
 
 extern void init_ioasic_irqs(int base);
 
-extern void dec_ioasic_clocksource_init(void);
+extern int dec_ioasic_clocksource_init(void);
 
 #endif /* __ASM_DEC_IOASIC_H */
diff --git a/arch/mips/include/asm/dec/ioasic_addrs.h b/arch/mips/include/asm/dec/ioasic_addrs.h
index a8665a7..8bd9597 100644
--- a/arch/mips/include/asm/dec/ioasic_addrs.h
+++ b/arch/mips/include/asm/dec/ioasic_addrs.h
@@ -40,7 +40,7 @@
 #define IOASIC_FLOPPY	(11*IOASIC_SLOT_SIZE)	/* FDC (maxine) */
 #define IOASIC_SCSI	(12*IOASIC_SLOT_SIZE)	/* ASC SCSI */
 #define IOASIC_FDC_DMA	(13*IOASIC_SLOT_SIZE)	/* FDC DMA (maxine) */
-#define IOASIC_SCSI_DMA (14*IOASIC_SLOT_SIZE)	/* ??? */
+#define IOASIC_SCSI_DMA	(14*IOASIC_SLOT_SIZE)	/* ??? */
 #define IOASIC_RES_15	(15*IOASIC_SLOT_SIZE)	/* unused? */
 
 
diff --git a/arch/mips/include/asm/dec/kn01.h b/arch/mips/include/asm/dec/kn01.h
index 0eb3241..88d9ffd 100644
--- a/arch/mips/include/asm/dec/kn01.h
+++ b/arch/mips/include/asm/dec/kn01.h
@@ -57,12 +57,12 @@
 /*
  * System Control & Status Register bits.
  */
-#define KN01_CSR_MNFMOD		(1<<15) /* MNFMOD manufacturing jumper */
-#define KN01_CSR_STATUS		(1<<14) /* self-test result status output */
-#define KN01_CSR_PARDIS		(1<<13) /* parity error disable */
-#define KN01_CSR_CRSRTST	(1<<12) /* PCC test output */
-#define KN01_CSR_MONO		(1<<11) /* mono/color fb SIMM installed */
-#define KN01_CSR_MEMERR		(1<<10) /* write timeout error status & ack*/
+#define KN01_CSR_MNFMOD		(1<<15)	/* MNFMOD manufacturing jumper */
+#define KN01_CSR_STATUS		(1<<14)	/* self-test result status output */
+#define KN01_CSR_PARDIS		(1<<13)	/* parity error disable */
+#define KN01_CSR_CRSRTST	(1<<12)	/* PCC test output */
+#define KN01_CSR_MONO		(1<<11)	/* mono/color fb SIMM installed */
+#define KN01_CSR_MEMERR		(1<<10)	/* write timeout error status & ack*/
 #define KN01_CSR_VINT		(1<<9)	/* PCC area detect #2 status & ack */
 #define KN01_CSR_TXDIS		(1<<8)	/* DZ11 transmit disable */
 #define KN01_CSR_VBGTRG		(1<<2)	/* blue DAC voltage over green (r/o) */
diff --git a/arch/mips/include/asm/dec/kn02ca.h b/arch/mips/include/asm/dec/kn02ca.h
index 69dc2a9..92c0fe2 100644
--- a/arch/mips/include/asm/dec/kn02ca.h
+++ b/arch/mips/include/asm/dec/kn02ca.h
@@ -68,7 +68,7 @@
 #define KN03CA_IO_SSR_ISDN_RST	(1<<12)		/* ~ISDN (Am79C30A) reset */
 
 #define KN03CA_IO_SSR_FLOPPY_RST (1<<7)		/* ~FDC (82077) reset */
-#define KN03CA_IO_SSR_VIDEO_RST (1<<6)		/* ~framebuffer reset */
+#define KN03CA_IO_SSR_VIDEO_RST	(1<<6)		/* ~framebuffer reset */
 #define KN03CA_IO_SSR_AB_RST	(1<<5)		/* ACCESS.bus reset */
 #define KN03CA_IO_SSR_RES_4	(1<<4)		/* unused */
 #define KN03CA_IO_SSR_RES_3	(1<<4)		/* unused */
diff --git a/arch/mips/include/asm/dec/prom.h b/arch/mips/include/asm/dec/prom.h
index 4465777..c0ead63 100644
--- a/arch/mips/include/asm/dec/prom.h
+++ b/arch/mips/include/asm/dec/prom.h
@@ -49,7 +49,7 @@
 
 #ifdef CONFIG_64BIT
 
-#define prom_is_rex(magic)	1	/* KN04 and KN05 are REX PROMs.	 */
+#define prom_is_rex(magic)	1	/* KN04 and KN05 are REX PROMs.  */
 
 #else /* !CONFIG_64BIT */
 
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
index cf3ae24..a66359e 100644
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@@ -331,6 +331,7 @@ extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *);
 #define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs)			\
 	dump_task_fpu(tsk, elf_fpregs)
 
+#define CORE_DUMP_USE_REGSET
 #define ELF_EXEC_PAGESIZE	PAGE_SIZE
 
 /* This yields a mask that user programs can use to figure out what
diff --git a/arch/mips/include/asm/emergency-restart.h b/arch/mips/include/asm/emergency-restart.h
deleted file mode 100644
index 108d8c4..0000000
--- a/arch/mips/include/asm/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/mips/include/asm/jump_label.h b/arch/mips/include/asm/jump_label.h
index 4d6d77e..e194f95 100644
--- a/arch/mips/include/asm/jump_label.h
+++ b/arch/mips/include/asm/jump_label.h
@@ -22,7 +22,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key *key)
 {
-	asm goto("1:\tnop\n\t"
+	asm_volatile_goto("1:\tnop\n\t"
 		"nop\n\t"
 		".pushsection __jump_table,  \"aw\"\n\t"
 		WORD_INSN " 1b, %l[l_yes], %0\n\t"
diff --git a/arch/mips/include/asm/local64.h b/arch/mips/include/asm/local64.h
deleted file mode 100644
index 36c93b5..0000000
--- a/arch/mips/include/asm/local64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/local64.h>
diff --git a/arch/mips/include/asm/mach-ath79/ar933x_uart_platform.h b/arch/mips/include/asm/mach-ath79/ar933x_uart_platform.h
deleted file mode 100644
index 6cb30f2..0000000
--- a/arch/mips/include/asm/mach-ath79/ar933x_uart_platform.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  Platform data definition for Atheros AR933X UART
- *
- *  Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#ifndef _AR933X_UART_PLATFORM_H
-#define _AR933X_UART_PLATFORM_H
-
-struct ar933x_uart_platform_data {
-	unsigned	uartclk;
-};
-
-#endif /* _AR933X_UART_PLATFORM_H */
diff --git a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
index ddb947e..0089a74 100644
--- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
@@ -42,8 +42,6 @@
 #define cpu_has_mips64r1	0
 #define cpu_has_mips64r2	0
 
-#define cpu_has_dsp		0
-#define cpu_has_dsp2		0
 #define cpu_has_mipsmt		0
 
 #define cpu_has_64bits		0
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index 3e11a46..54f9e84 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -43,6 +43,8 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 
+#include <asm/cpu.h>
+
 /* cpu pipeline flush */
 void static inline au_sync(void)
 {
@@ -140,7 +142,7 @@ static inline int au1xxx_cpu_needs_config_od(void)
 
 static inline int alchemy_get_cputype(void)
 {
-	switch (read_c0_prid() & 0xffff0000) {
+	switch (read_c0_prid() & (PRID_OPT_MASK | PRID_COMP_MASK)) {
 	case 0x00030000:
 		return ALCHEMY_CPU_AU1000;
 		break;
diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
new file mode 100644
index 0000000..00867dd
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
@@ -0,0 +1,110 @@
+#ifndef __BCM47XX_BOARD_H
+#define __BCM47XX_BOARD_H
+
+enum bcm47xx_board {
+	BCM47XX_BOARD_ASUS_RTAC66U,
+	BCM47XX_BOARD_ASUS_RTN10,
+	BCM47XX_BOARD_ASUS_RTN10D,
+	BCM47XX_BOARD_ASUS_RTN10U,
+	BCM47XX_BOARD_ASUS_RTN12,
+	BCM47XX_BOARD_ASUS_RTN12B1,
+	BCM47XX_BOARD_ASUS_RTN12C1,
+	BCM47XX_BOARD_ASUS_RTN12D1,
+	BCM47XX_BOARD_ASUS_RTN12HP,
+	BCM47XX_BOARD_ASUS_RTN15U,
+	BCM47XX_BOARD_ASUS_RTN16,
+	BCM47XX_BOARD_ASUS_RTN53,
+	BCM47XX_BOARD_ASUS_RTN66U,
+	BCM47XX_BOARD_ASUS_WL300G,
+	BCM47XX_BOARD_ASUS_WL320GE,
+	BCM47XX_BOARD_ASUS_WL330GE,
+	BCM47XX_BOARD_ASUS_WL500GD,
+	BCM47XX_BOARD_ASUS_WL500GPV1,
+	BCM47XX_BOARD_ASUS_WL500GPV2,
+	BCM47XX_BOARD_ASUS_WL500W,
+	BCM47XX_BOARD_ASUS_WL520GC,
+	BCM47XX_BOARD_ASUS_WL520GU,
+	BCM47XX_BOARD_ASUS_WL700GE,
+	BCM47XX_BOARD_ASUS_WLHDD,
+
+	BCM47XX_BOARD_BELKIN_F7D4301,
+
+	BCM47XX_BOARD_BUFFALO_WBR2_G54,
+	BCM47XX_BOARD_BUFFALO_WHR2_A54G54,
+	BCM47XX_BOARD_BUFFALO_WHR_G125,
+	BCM47XX_BOARD_BUFFALO_WHR_G54S,
+	BCM47XX_BOARD_BUFFALO_WHR_HP_G54,
+	BCM47XX_BOARD_BUFFALO_WLA2_G54L,
+	BCM47XX_BOARD_BUFFALO_WZR_G300N,
+	BCM47XX_BOARD_BUFFALO_WZR_RS_G54,
+	BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP,
+
+	BCM47XX_BOARD_CISCO_M10V1,
+	BCM47XX_BOARD_CISCO_M20V1,
+
+	BCM47XX_BOARD_DELL_TM2300,
+
+	BCM47XX_BOARD_DLINK_DIR130,
+	BCM47XX_BOARD_DLINK_DIR330,
+
+	BCM47XX_BOARD_HUAWEI_E970,
+
+	BCM47XX_BOARD_LINKSYS_E900V1,
+	BCM47XX_BOARD_LINKSYS_E1000V1,
+	BCM47XX_BOARD_LINKSYS_E1000V2,
+	BCM47XX_BOARD_LINKSYS_E1000V21,
+	BCM47XX_BOARD_LINKSYS_E1200V2,
+	BCM47XX_BOARD_LINKSYS_E2000V1,
+	BCM47XX_BOARD_LINKSYS_E3000V1,
+	BCM47XX_BOARD_LINKSYS_E3200V1,
+	BCM47XX_BOARD_LINKSYS_E4200V1,
+	BCM47XX_BOARD_LINKSYS_WRT150NV1,
+	BCM47XX_BOARD_LINKSYS_WRT150NV11,
+	BCM47XX_BOARD_LINKSYS_WRT160NV1,
+	BCM47XX_BOARD_LINKSYS_WRT160NV3,
+	BCM47XX_BOARD_LINKSYS_WRT300NV11,
+	BCM47XX_BOARD_LINKSYS_WRT310NV1,
+	BCM47XX_BOARD_LINKSYS_WRT310NV2,
+	BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
+	BCM47XX_BOARD_LINKSYS_WRT610NV1,
+	BCM47XX_BOARD_LINKSYS_WRT610NV2,
+	BCM47XX_BOARD_LINKSYS_WRTSL54GS,
+
+	BCM47XX_BOARD_MOTOROLA_WE800G,
+	BCM47XX_BOARD_MOTOROLA_WR850GP,
+	BCM47XX_BOARD_MOTOROLA_WR850GV2V3,
+
+	BCM47XX_BOARD_NETGEAR_WGR614V8,
+	BCM47XX_BOARD_NETGEAR_WGR614V9,
+	BCM47XX_BOARD_NETGEAR_WNDR3300,
+	BCM47XX_BOARD_NETGEAR_WNDR3400V1,
+	BCM47XX_BOARD_NETGEAR_WNDR3400V2,
+	BCM47XX_BOARD_NETGEAR_WNDR3400VCNA,
+	BCM47XX_BOARD_NETGEAR_WNDR3700V3,
+	BCM47XX_BOARD_NETGEAR_WNDR4000,
+	BCM47XX_BOARD_NETGEAR_WNDR4500V1,
+	BCM47XX_BOARD_NETGEAR_WNDR4500V2,
+	BCM47XX_BOARD_NETGEAR_WNR2000,
+	BCM47XX_BOARD_NETGEAR_WNR3500L,
+	BCM47XX_BOARD_NETGEAR_WNR3500U,
+	BCM47XX_BOARD_NETGEAR_WNR3500V2,
+	BCM47XX_BOARD_NETGEAR_WNR3500V2VC,
+	BCM47XX_BOARD_NETGEAR_WNR834BV2,
+
+	BCM47XX_BOARD_PHICOMM_M1,
+
+	BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE,
+
+	BCM47XX_BOARD_ZTE_H218N,
+
+	BCM47XX_BOARD_UNKNOWN,
+	BCM47XX_BOARD_NO,
+};
+
+#define BCM47XX_BOARD_MAX_NAME 30
+
+void bcm47xx_board_detect(void);
+enum bcm47xx_board bcm47xx_board_get(void);
+const char *bcm47xx_board_get_name(void);
+
+#endif /* __BCM47XX_BOARD_H */
diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h
index b8e7be8..36a3fc1 100644
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h
@@ -48,4 +48,6 @@ static inline void bcm47xx_nvram_parse_macaddr(char *buf, u8 macaddr[6])
 		printk(KERN_WARNING "Can not parse mac address: %s\n", buf);
 }
 
+int bcm47xx_nvram_gpio_pin(const char *name);
+
 #endif /* __BCM47XX_NVRAM_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h
index 4e0b6bc..348df49 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h
@@ -30,4 +30,6 @@ u8 *bcm63xx_nvram_get_name(void);
  */
 int bcm63xx_nvram_get_mac_address(u8 *mac);
 
+int bcm63xx_nvram_get_psi_size(void);
+
 #endif /* BCM63XX_NVRAM_H */
diff --git a/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h b/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
index 47fb247..f9f4486 100644
--- a/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
+++ b/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
@@ -52,23 +52,11 @@ static inline int plat_dma_supported(struct device *dev, u64 mask)
 	return 0;
 }
 
-static inline void plat_extra_sync_for_device(struct device *dev)
-{
-	BUG();
-}
-
 static inline int plat_device_is_coherent(struct device *dev)
 {
 	return 1;
 }
 
-static inline int plat_dma_mapping_error(struct device *dev,
-					 dma_addr_t dma_addr)
-{
-	BUG();
-	return 0;
-}
-
 dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr);
 phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr);
 
diff --git a/arch/mips/include/asm/mach-cavium-octeon/gpio.h b/arch/mips/include/asm/mach-cavium-octeon/gpio.h
new file mode 100644
index 0000000..34e9f7a
--- /dev/null
+++ b/arch/mips/include/asm/mach-cavium-octeon/gpio.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_MACH_CAVIUM_OCTEON_GPIO_H
+#define __ASM_MACH_CAVIUM_OCTEON_GPIO_H
+
+#ifdef CONFIG_GPIOLIB
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#else
+int gpio_request(unsigned gpio, const char *label);
+void gpio_free(unsigned gpio);
+int gpio_direction_input(unsigned gpio);
+int gpio_direction_output(unsigned gpio, int value);
+int gpio_get_value(unsigned gpio);
+void gpio_set_value(unsigned gpio, int value);
+#endif
+
+#include <asm-generic/gpio.h>
+
+#define gpio_to_irq	__gpio_to_irq
+
+#endif /* __ASM_MACH_GENERIC_GPIO_H */
diff --git a/arch/mips/include/asm/mach-dec/cpu-feature-overrides.h b/arch/mips/include/asm/mach-dec/cpu-feature-overrides.h
new file mode 100644
index 0000000..acce27f
--- /dev/null
+++ b/arch/mips/include/asm/mach-dec/cpu-feature-overrides.h
@@ -0,0 +1,87 @@
+/*
+ *	CPU feature overrides for DECstation systems.  Two variations
+ *	are generally applicable.
+ *
+ *	Copyright (C) 2013  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MACH_DEC_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_DEC_CPU_FEATURE_OVERRIDES_H
+
+/* Generic ones first.  */
+#define cpu_has_tlb			1
+#define cpu_has_tx39_cache		0
+#define cpu_has_fpu			1
+#define cpu_has_divec			0
+#define cpu_has_prefetch		0
+#define cpu_has_mcheck			0
+#define cpu_has_ejtag			0
+#define cpu_has_mips16			0
+#define cpu_has_mdmx			0
+#define cpu_has_mips3d			0
+#define cpu_has_smartmips		0
+#define cpu_has_rixi			0
+#define cpu_has_vtag_icache		0
+#define cpu_has_ic_fills_f_dc		0
+#define cpu_has_pindexed_dcache		0
+#define cpu_has_local_ebase		0
+#define cpu_icache_snoops_remote_store	1
+#define cpu_has_mips_4			0
+#define cpu_has_mips_5			0
+#define cpu_has_mips32r1		0
+#define cpu_has_mips32r2		0
+#define cpu_has_mips64r1		0
+#define cpu_has_mips64r2		0
+#define cpu_has_dsp			0
+#define cpu_has_mipsmt			0
+#define cpu_has_userlocal		0
+
+/* R3k-specific ones.  */
+#ifdef CONFIG_CPU_R3000
+#define cpu_has_4kex			0
+#define cpu_has_3k_cache		1
+#define cpu_has_4k_cache		0
+#define cpu_has_32fpr			0
+#define cpu_has_counter			0
+#define cpu_has_watch			0
+#define cpu_has_vce			0
+#define cpu_has_cache_cdex_p		0
+#define cpu_has_cache_cdex_s		0
+#define cpu_has_llsc			0
+#define cpu_has_dc_aliases		0
+#define cpu_has_mips_2			0
+#define cpu_has_mips_3			0
+#define cpu_has_nofpuex			1
+#define cpu_has_inclusive_pcaches	0
+#define cpu_dcache_line_size()		4
+#define cpu_icache_line_size()		4
+#define cpu_scache_line_size()		0
+#endif /* CONFIG_CPU_R3000 */
+
+/* R4k-specific ones.  */
+#ifdef CONFIG_CPU_R4X00
+#define cpu_has_4kex			1
+#define cpu_has_3k_cache		0
+#define cpu_has_4k_cache		1
+#define cpu_has_32fpr			1
+#define cpu_has_counter			1
+#define cpu_has_watch			1
+#define cpu_has_vce			1
+#define cpu_has_cache_cdex_p		1
+#define cpu_has_cache_cdex_s		1
+#define cpu_has_llsc			1
+#define cpu_has_dc_aliases		(PAGE_SIZE < 0x4000)
+#define cpu_has_mips_2			1
+#define cpu_has_mips_3			1
+#define cpu_has_nofpuex			0
+#define cpu_has_inclusive_pcaches	1
+#define cpu_dcache_line_size()		16
+#define cpu_icache_line_size()		16
+#define cpu_scache_line_size()		32
+#endif /* CONFIG_CPU_R4X00 */
+
+#endif /* __ASM_MACH_DEC_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-generic/dma-coherence.h b/arch/mips/include/asm/mach-generic/dma-coherence.h
index 74cb992..a9e8f6b 100644
--- a/arch/mips/include/asm/mach-generic/dma-coherence.h
+++ b/arch/mips/include/asm/mach-generic/dma-coherence.h
@@ -47,16 +47,6 @@ static inline int plat_dma_supported(struct device *dev, u64 mask)
 	return 1;
 }
 
-static inline void plat_extra_sync_for_device(struct device *dev)
-{
-}
-
-static inline int plat_dma_mapping_error(struct device *dev,
-					 dma_addr_t dma_addr)
-{
-	return 0;
-}
-
 static inline int plat_device_is_coherent(struct device *dev)
 {
 #ifdef CONFIG_DMA_COHERENT
diff --git a/arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h
index f4caacd..1bcb642 100644
--- a/arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h
@@ -8,6 +8,8 @@
 #ifndef __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H
 #define __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H
 
+#include <asm/cpu.h>
+
 /*
  * IP22 with a variety of processors so we can't use defaults for everything.
  */
diff --git a/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h
index 1d2b6ff..d6111aa 100644
--- a/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h
@@ -8,6 +8,8 @@
 #ifndef __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H
 #define __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H
 
+#include <asm/cpu.h>
+
 /*
  * IP27 only comes with R10000 family processors all using the same config
  */
diff --git a/arch/mips/include/asm/mach-ip27/dma-coherence.h b/arch/mips/include/asm/mach-ip27/dma-coherence.h
index 06c4419..4ffddfd 100644
--- a/arch/mips/include/asm/mach-ip27/dma-coherence.h
+++ b/arch/mips/include/asm/mach-ip27/dma-coherence.h
@@ -58,16 +58,6 @@ static inline int plat_dma_supported(struct device *dev, u64 mask)
 	return 1;
 }
 
-static inline void plat_extra_sync_for_device(struct device *dev)
-{
-}
-
-static inline int plat_dma_mapping_error(struct device *dev,
-					 dma_addr_t dma_addr)
-{
-	return 0;
-}
-
 static inline int plat_device_is_coherent(struct device *dev)
 {
 	return 1;		/* IP27 non-cohernet mode is unsupported */
diff --git a/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h
index 65e9c85..4cec06d 100644
--- a/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h
@@ -9,6 +9,8 @@
 #ifndef __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H
 #define __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H
 
+#include <asm/cpu.h>
+
 /*
  * IP28 only comes with R10000 family processors all using the same config
  */
diff --git a/arch/mips/include/asm/mach-ip32/dma-coherence.h b/arch/mips/include/asm/mach-ip32/dma-coherence.h
index 073f0c4..104cfbc 100644
--- a/arch/mips/include/asm/mach-ip32/dma-coherence.h
+++ b/arch/mips/include/asm/mach-ip32/dma-coherence.h
@@ -80,17 +80,6 @@ static inline int plat_dma_supported(struct device *dev, u64 mask)
 	return 1;
 }
 
-static inline void plat_extra_sync_for_device(struct device *dev)
-{
-	return;
-}
-
-static inline int plat_dma_mapping_error(struct device *dev,
-					 dma_addr_t dma_addr)
-{
-	return 0;
-}
-
 static inline int plat_device_is_coherent(struct device *dev)
 {
 	return 0;		/* IP32 is non-cohernet */
diff --git a/arch/mips/include/asm/mach-jazz/dma-coherence.h b/arch/mips/include/asm/mach-jazz/dma-coherence.h
index 9fc1e9a..949003e 100644
--- a/arch/mips/include/asm/mach-jazz/dma-coherence.h
+++ b/arch/mips/include/asm/mach-jazz/dma-coherence.h
@@ -48,16 +48,6 @@ static inline int plat_dma_supported(struct device *dev, u64 mask)
 	return 1;
 }
 
-static inline void plat_extra_sync_for_device(struct device *dev)
-{
-}
-
-static inline int plat_dma_mapping_error(struct device *dev,
-					 dma_addr_t dma_addr)
-{
-	return 0;
-}
-
 static inline int plat_device_is_coherent(struct device *dev)
 {
 	return 0;
diff --git a/arch/mips/include/asm/mach-lantiq/falcon/cpu-feature-overrides.h b/arch/mips/include/asm/mach-lantiq/falcon/cpu-feature-overrides.h
new file mode 100644
index 0000000..096a100
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/falcon/cpu-feature-overrides.h
@@ -0,0 +1,58 @@
+/*
+ *  Lantiq FALCON specific CPU feature overrides
+ *
+ *  Copyright (C) 2013 Thomas Langer, Lantiq Deutschland
+ *
+ *  This file was derived from: include/asm-mips/cpu-features.h
+ *	Copyright (C) 2003, 2004 Ralf Baechle
+ *	Copyright (C) 2004 Maciej W. Rozycki
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_MACH_FALCON_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_FALCON_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_tlb		1
+#define cpu_has_4kex		1
+#define cpu_has_3k_cache	0
+#define cpu_has_4k_cache	1
+#define cpu_has_tx39_cache	0
+#define cpu_has_sb1_cache	0
+#define cpu_has_fpu		0
+#define cpu_has_32fpr		0
+#define cpu_has_counter		1
+#define cpu_has_watch		1
+#define cpu_has_divec		1
+
+#define cpu_has_prefetch	1
+#define cpu_has_ejtag		1
+#define cpu_has_llsc		1
+
+#define cpu_has_mips16		1
+#define cpu_has_mdmx		0
+#define cpu_has_mips3d		0
+#define cpu_has_smartmips	0
+
+#define cpu_has_mips32r1	1
+#define cpu_has_mips32r2	1
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+
+#define cpu_has_dsp		1
+#define cpu_has_mipsmt		1
+
+#define cpu_has_vint		1
+#define cpu_has_veic		1
+
+#define cpu_has_64bits		0
+#define cpu_has_64bit_zero_reg	0
+#define cpu_has_64bit_gp_regs	0
+#define cpu_has_64bit_addresses	0
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+
+#endif /* __ASM_MACH_FALCON_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-loongson/dma-coherence.h b/arch/mips/include/asm/mach-loongson/dma-coherence.h
index e143305..aeb2c05 100644
--- a/arch/mips/include/asm/mach-loongson/dma-coherence.h
+++ b/arch/mips/include/asm/mach-loongson/dma-coherence.h
@@ -53,16 +53,6 @@ static inline int plat_dma_supported(struct device *dev, u64 mask)
 	return 1;
 }
 
-static inline void plat_extra_sync_for_device(struct device *dev)
-{
-}
-
-static inline int plat_dma_mapping_error(struct device *dev,
-					 dma_addr_t dma_addr)
-{
-	return 0;
-}
-
 static inline int plat_device_is_coherent(struct device *dev)
 {
 	return 0;
diff --git a/arch/mips/include/asm/mach-powertv/asic.h b/arch/mips/include/asm/mach-powertv/asic.h
deleted file mode 100644
index b341108..0000000
--- a/arch/mips/include/asm/mach-powertv/asic.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Copyright (C) 2009  Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifndef _ASM_MACH_POWERTV_ASIC_H
-#define _ASM_MACH_POWERTV_ASIC_H
-
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <asm/mach-powertv/asic_regs.h>
-
-#define DVR_CAPABLE	(1<<0)
-#define PCIE_CAPABLE	(1<<1)
-#define FFS_CAPABLE	(1<<2)
-#define DISPLAY_CAPABLE (1<<3)
-
-/* Platform Family types
- * For compitability, the new value must be added in the end */
-enum family_type {
-	FAMILY_8500,
-	FAMILY_8500RNG,
-	FAMILY_4500,
-	FAMILY_1500,
-	FAMILY_8600,
-	FAMILY_4600,
-	FAMILY_4600VZA,
-	FAMILY_8600VZB,
-	FAMILY_1500VZE,
-	FAMILY_1500VZF,
-	FAMILY_8700,
-	FAMILIES
-};
-
-/* Register maps for each ASIC */
-extern const struct register_map calliope_register_map;
-extern const struct register_map cronus_register_map;
-extern const struct register_map gaia_register_map;
-extern const struct register_map zeus_register_map;
-
-extern struct resource dvr_cronus_resources[];
-extern struct resource dvr_gaia_resources[];
-extern struct resource dvr_zeus_resources[];
-extern struct resource non_dvr_calliope_resources[];
-extern struct resource non_dvr_cronus_resources[];
-extern struct resource non_dvr_cronuslite_resources[];
-extern struct resource non_dvr_gaia_resources[];
-extern struct resource non_dvr_vz_calliope_resources[];
-extern struct resource non_dvr_vze_calliope_resources[];
-extern struct resource non_dvr_vzf_calliope_resources[];
-extern struct resource non_dvr_zeus_resources[];
-
-extern void powertv_platform_init(void);
-extern void platform_alloc_bootmem(void);
-extern enum asic_type platform_get_asic(void);
-extern enum family_type platform_get_family(void);
-extern int platform_supports_dvr(void);
-extern int platform_supports_ffs(void);
-extern int platform_supports_pcie(void);
-extern int platform_supports_display(void);
-extern void configure_platform(void);
-
-/* Platform Resources */
-#define ASIC_RESOURCE_GET_EXISTS 1
-extern struct resource *asic_resource_get(const char *name);
-extern void platform_release_memory(void *baddr, int size);
-
-/* USB configuration */
-struct usb_hcd;			/* Forward reference */
-extern void platform_configure_usb_ehci(void);
-extern void platform_unconfigure_usb_ehci(void);
-extern void platform_configure_usb_ohci(void);
-extern void platform_unconfigure_usb_ohci(void);
-
-/* Resource for ASIC registers */
-extern struct resource asic_resource;
-extern int platform_usb_devices_init(struct platform_device **echi_dev,
-	struct platform_device **ohci_dev);
-
-/* Reboot Cause */
-extern void set_reboot_cause(char code, unsigned int data, unsigned int data2);
-extern void set_locked_reboot_cause(char code, unsigned int data,
-	unsigned int data2);
-
-enum sys_reboot_type {
-	sys_unknown_reboot = 0x00,	/* Unknown reboot cause */
-	sys_davic_change = 0x01,	/* Reboot due to change in DAVIC
-					 * mode */
-	sys_user_reboot = 0x02,		/* Reboot initiated by user */
-	sys_system_reboot = 0x03,	/* Reboot initiated by OS */
-	sys_trap_reboot = 0x04,		/* Reboot due to a CPU trap */
-	sys_silent_reboot = 0x05,	/* Silent reboot */
-	sys_boot_ldr_reboot = 0x06,	/* Bootloader reboot */
-	sys_power_up_reboot = 0x07,	/* Power on bootup.  Older
-					 * drivers may report as
-					 * userReboot. */
-	sys_code_change = 0x08,		/* Reboot to take code change.
-					 * Older drivers may report as
-					 * userReboot. */
-	sys_hardware_reset = 0x09,	/* HW watchdog or front-panel
-					 * reset button reset.	Older
-					 * drivers may report as
-					 * userReboot. */
-	sys_watchdogInterrupt = 0x0A	/* Pre-watchdog interrupt */
-};
-
-#endif /* _ASM_MACH_POWERTV_ASIC_H */
diff --git a/arch/mips/include/asm/mach-powertv/asic_reg_map.h b/arch/mips/include/asm/mach-powertv/asic_reg_map.h
deleted file mode 100644
index 20348e8..0000000
--- a/arch/mips/include/asm/mach-powertv/asic_reg_map.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- *				asic_reg_map.h
- *
- * A macro-enclosed list of the elements for the register_map structure for
- * use in defining and manipulating the structure.
- *
- * Copyright (C) 2009  Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-REGISTER_MAP_ELEMENT(eic_slow0_strt_add)
-REGISTER_MAP_ELEMENT(eic_cfg_bits)
-REGISTER_MAP_ELEMENT(eic_ready_status)
-REGISTER_MAP_ELEMENT(chipver3)
-REGISTER_MAP_ELEMENT(chipver2)
-REGISTER_MAP_ELEMENT(chipver1)
-REGISTER_MAP_ELEMENT(chipver0)
-REGISTER_MAP_ELEMENT(uart1_intstat)
-REGISTER_MAP_ELEMENT(uart1_inten)
-REGISTER_MAP_ELEMENT(uart1_config1)
-REGISTER_MAP_ELEMENT(uart1_config2)
-REGISTER_MAP_ELEMENT(uart1_divisorhi)
-REGISTER_MAP_ELEMENT(uart1_divisorlo)
-REGISTER_MAP_ELEMENT(uart1_data)
-REGISTER_MAP_ELEMENT(uart1_status)
-REGISTER_MAP_ELEMENT(int_stat_3)
-REGISTER_MAP_ELEMENT(int_stat_2)
-REGISTER_MAP_ELEMENT(int_stat_1)
-REGISTER_MAP_ELEMENT(int_stat_0)
-REGISTER_MAP_ELEMENT(int_config)
-REGISTER_MAP_ELEMENT(int_int_scan)
-REGISTER_MAP_ELEMENT(ien_int_3)
-REGISTER_MAP_ELEMENT(ien_int_2)
-REGISTER_MAP_ELEMENT(ien_int_1)
-REGISTER_MAP_ELEMENT(ien_int_0)
-REGISTER_MAP_ELEMENT(int_level_3_3)
-REGISTER_MAP_ELEMENT(int_level_3_2)
-REGISTER_MAP_ELEMENT(int_level_3_1)
-REGISTER_MAP_ELEMENT(int_level_3_0)
-REGISTER_MAP_ELEMENT(int_level_2_3)
-REGISTER_MAP_ELEMENT(int_level_2_2)
-REGISTER_MAP_ELEMENT(int_level_2_1)
-REGISTER_MAP_ELEMENT(int_level_2_0)
-REGISTER_MAP_ELEMENT(int_level_1_3)
-REGISTER_MAP_ELEMENT(int_level_1_2)
-REGISTER_MAP_ELEMENT(int_level_1_1)
-REGISTER_MAP_ELEMENT(int_level_1_0)
-REGISTER_MAP_ELEMENT(int_level_0_3)
-REGISTER_MAP_ELEMENT(int_level_0_2)
-REGISTER_MAP_ELEMENT(int_level_0_1)
-REGISTER_MAP_ELEMENT(int_level_0_0)
-REGISTER_MAP_ELEMENT(int_docsis_en)
-REGISTER_MAP_ELEMENT(mips_pll_setup)
-REGISTER_MAP_ELEMENT(fs432x4b4_usb_ctl)
-REGISTER_MAP_ELEMENT(test_bus)
-REGISTER_MAP_ELEMENT(crt_spare)
-REGISTER_MAP_ELEMENT(usb2_ohci_int_mask)
-REGISTER_MAP_ELEMENT(usb2_strap)
-REGISTER_MAP_ELEMENT(ehci_hcapbase)
-REGISTER_MAP_ELEMENT(ohci_hc_revision)
-REGISTER_MAP_ELEMENT(bcm1_bs_lmi_steer)
-REGISTER_MAP_ELEMENT(usb2_control)
-REGISTER_MAP_ELEMENT(usb2_stbus_obc)
-REGISTER_MAP_ELEMENT(usb2_stbus_mess_size)
-REGISTER_MAP_ELEMENT(usb2_stbus_chunk_size)
-REGISTER_MAP_ELEMENT(pcie_regs)
-REGISTER_MAP_ELEMENT(tim_ch)
-REGISTER_MAP_ELEMENT(tim_cl)
-REGISTER_MAP_ELEMENT(gpio_dout)
-REGISTER_MAP_ELEMENT(gpio_din)
-REGISTER_MAP_ELEMENT(gpio_dir)
-REGISTER_MAP_ELEMENT(watchdog)
-REGISTER_MAP_ELEMENT(front_panel)
-REGISTER_MAP_ELEMENT(misc_clk_ctl1)
-REGISTER_MAP_ELEMENT(misc_clk_ctl2)
-REGISTER_MAP_ELEMENT(crt_ext_ctl)
-REGISTER_MAP_ELEMENT(register_maps)
diff --git a/arch/mips/include/asm/mach-powertv/asic_regs.h b/arch/mips/include/asm/mach-powertv/asic_regs.h
deleted file mode 100644
index 06712ab..0000000
--- a/arch/mips/include/asm/mach-powertv/asic_regs.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Copyright (C) 2009  Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifndef __ASM_MACH_POWERTV_ASIC_H_
-#define __ASM_MACH_POWERTV_ASIC_H_
-#include <linux/io.h>
-
-/* ASIC types */
-enum asic_type {
-	ASIC_UNKNOWN,
-	ASIC_ZEUS,
-	ASIC_CALLIOPE,
-	ASIC_CRONUS,
-	ASIC_CRONUSLITE,
-	ASIC_GAIA,
-	ASICS			/* Number of supported ASICs */
-};
-
-/* hardcoded values read from Chip Version registers */
-#define CRONUS_10	0x0B4C1C20
-#define CRONUS_11	0x0B4C1C21
-#define CRONUSLITE_10	0x0B4C1C40
-
-#define NAND_FLASH_BASE		0x03000000
-#define CALLIOPE_IO_BASE	0x08000000
-#define GAIA_IO_BASE		0x09000000
-#define CRONUS_IO_BASE		0x09000000
-#define ZEUS_IO_BASE		0x09000000
-
-#define ASIC_IO_SIZE		0x01000000
-
-/* Definitions for backward compatibility */
-#define UART1_INTSTAT	uart1_intstat
-#define UART1_INTEN	uart1_inten
-#define UART1_CONFIG1	uart1_config1
-#define UART1_CONFIG2	uart1_config2
-#define UART1_DIVISORHI uart1_divisorhi
-#define UART1_DIVISORLO uart1_divisorlo
-#define UART1_DATA	uart1_data
-#define UART1_STATUS	uart1_status
-
-/* ASIC register enumeration */
-union register_map_entry {
-	unsigned long phys;
-	u32 *virt;
-};
-
-#define REGISTER_MAP_ELEMENT(x) union register_map_entry x;
-struct register_map {
-#include <asm/mach-powertv/asic_reg_map.h>
-};
-#undef REGISTER_MAP_ELEMENT
-
-/**
- * register_map_offset_phys - add an offset to the physical address
- * @map:	Pointer to the &struct register_map
- * @offset:	Value to add
- *
- * Only adds the base to non-zero physical addresses
- */
-static inline void register_map_offset_phys(struct register_map *map,
-	unsigned long offset)
-{
-#define REGISTER_MAP_ELEMENT(x)		do {				\
-		if (map->x.phys != 0)					\
-			map->x.phys += offset;				\
-	} while (false);
-
-#include <asm/mach-powertv/asic_reg_map.h>
-#undef REGISTER_MAP_ELEMENT
-}
-
-/**
- * register_map_virtualize - Convert &register_map to virtual addresses
- * @map:	Pointer to &register_map to virtualize
- */
-static inline void register_map_virtualize(struct register_map *map)
-{
-#define REGISTER_MAP_ELEMENT(x)		do {				\
-		map->x.virt = (!map->x.phys) ? NULL :			\
-			UNCAC_ADDR(phys_to_virt(map->x.phys));		\
-	} while (false);
-
-#include <asm/mach-powertv/asic_reg_map.h>
-#undef REGISTER_MAP_ELEMENT
-}
-
-extern struct register_map _asic_register_map;
-extern unsigned long asic_phy_base;
-
-/*
- * Macros to interface to registers through their ioremapped address
- * asic_reg_phys_addr	Returns the physical address of the given register
- * asic_reg_addr	Returns the iomapped virtual address of the given
- *			register.
- */
-#define asic_reg_addr(x)	(_asic_register_map.x.virt)
-#define asic_reg_phys_addr(x)	(virt_to_phys((void *) CAC_ADDR(	\
-					(unsigned long) asic_reg_addr(x))))
-
-/*
- * The asic_reg macro is gone. It should be replaced by either asic_read or
- * asic_write, as appropriate.
- */
-
-#define asic_read(x)		readl(asic_reg_addr(x))
-#define asic_write(v, x)	writel(v, asic_reg_addr(x))
-
-extern void asic_irq_init(void);
-#endif
diff --git a/arch/mips/include/asm/mach-powertv/cpu-feature-overrides.h b/arch/mips/include/asm/mach-powertv/cpu-feature-overrides.h
deleted file mode 100644
index 58c76ec..0000000
--- a/arch/mips/include/asm/mach-powertv/cpu-feature-overrides.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) 2010  Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifndef _ASM_MACH_POWERTV_CPU_FEATURE_OVERRIDES_H_
-#define _ASM_MACH_POWERTV_CPU_FEATURE_OVERRIDES_H_
-#define cpu_has_tlb			1
-#define cpu_has_4kex			1
-#define cpu_has_3k_cache		0
-#define cpu_has_4k_cache		1
-#define cpu_has_tx39_cache		0
-#define cpu_has_fpu			0
-#define cpu_has_counter			1
-#define cpu_has_watch			1
-#define cpu_has_divec			1
-#define cpu_has_vce			0
-#define cpu_has_cache_cdex_p		0
-#define cpu_has_cache_cdex_s		0
-#define cpu_has_mcheck			1
-#define cpu_has_ejtag			1
-#define cpu_has_llsc			1
-#define cpu_has_mips16			0
-#define cpu_has_mdmx			0
-#define cpu_has_mips3d			0
-#define cpu_has_smartmips		0
-#define cpu_has_vtag_icache		0
-#define cpu_has_dc_aliases		0
-#define cpu_has_ic_fills_f_dc		0
-#define cpu_has_mips32r1		0
-#define cpu_has_mips32r2		1
-#define cpu_has_mips64r1		0
-#define cpu_has_mips64r2		0
-#define cpu_has_dsp			0
-#define cpu_has_dsp2			0
-#define cpu_has_mipsmt			0
-#define cpu_has_userlocal		0
-#define cpu_has_nofpuex			0
-#define cpu_has_64bits			0
-#define cpu_has_64bit_zero_reg		0
-#define cpu_has_vint			1
-#define cpu_has_veic			1
-#define cpu_has_inclusive_pcaches	0
-
-#define cpu_dcache_line_size()		32
-#define cpu_icache_line_size()		32
-#endif
diff --git a/arch/mips/include/asm/mach-powertv/dma-coherence.h b/arch/mips/include/asm/mach-powertv/dma-coherence.h
deleted file mode 100644
index f831672..0000000
--- a/arch/mips/include/asm/mach-powertv/dma-coherence.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Version from mach-generic modified to support PowerTV port
- * Portions Copyright (C) 2009	Cisco Systems, Inc.
- * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
- *
- */
-
-#ifndef __ASM_MACH_POWERTV_DMA_COHERENCE_H
-#define __ASM_MACH_POWERTV_DMA_COHERENCE_H
-
-#include <linux/sched.h>
-#include <linux/device.h>
-#include <asm/mach-powertv/asic.h>
-
-static inline bool is_kseg2(void *addr)
-{
-	return (unsigned long)addr >= KSEG2;
-}
-
-static inline unsigned long virt_to_phys_from_pte(void *addr)
-{
-	pgd_t *pgd;
-	pud_t *pud;
-	pmd_t *pmd;
-	pte_t *ptep, pte;
-
-	unsigned long virt_addr = (unsigned long)addr;
-	unsigned long phys_addr = 0UL;
-
-	/* get the page global directory. */
-	pgd = pgd_offset_k(virt_addr);
-
-	if (!pgd_none(*pgd)) {
-		/* get the page upper directory */
-		pud = pud_offset(pgd, virt_addr);
-		if (!pud_none(*pud)) {
-			/* get the page middle directory */
-			pmd = pmd_offset(pud, virt_addr);
-			if (!pmd_none(*pmd)) {
-				/* get a pointer to the page table entry */
-				ptep = pte_offset(pmd, virt_addr);
-				pte = *ptep;
-				/* check for a valid page */
-				if (pte_present(pte)) {
-					/* get the physical address the page is
-					 * referring to */
-					phys_addr = (unsigned long)
-						page_to_phys(pte_page(pte));
-					/* add the offset within the page */
-					phys_addr |= (virt_addr & ~PAGE_MASK);
-				}
-			}
-		}
-	}
-
-	return phys_addr;
-}
-
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
-	size_t size)
-{
-	if (is_kseg2(addr))
-		return phys_to_dma(virt_to_phys_from_pte(addr));
-	else
-		return phys_to_dma(virt_to_phys(addr));
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
-	struct page *page)
-{
-	return phys_to_dma(page_to_phys(page));
-}
-
-static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr)
-{
-	return dma_to_phys(dma_addr);
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
-}
-
-static inline void plat_extra_sync_for_device(struct device *dev)
-{
-}
-
-static inline int plat_dma_mapping_error(struct device *dev,
-					 dma_addr_t dma_addr)
-{
-	return 0;
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 0;
-}
-
-#endif /* __ASM_MACH_POWERTV_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-powertv/interrupts.h b/arch/mips/include/asm/mach-powertv/interrupts.h
deleted file mode 100644
index 6c463be..0000000
--- a/arch/mips/include/asm/mach-powertv/interrupts.h
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * Copyright (C) 2009  Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifndef _ASM_MACH_POWERTV_INTERRUPTS_H_
-#define _ASM_MACH_POWERTV_INTERRUPTS_H_
-
-/*
- * Defines for all of the interrupt lines
- */
-
-/* Definitions for backward compatibility */
-#define kIrq_Uart1		irq_uart1
-
-#define ibase 0
-
-/*------------- Register: int_stat_3 */
-/* 126 unused (bit 31) */
-#define irq_asc2video		(ibase+126)	/* ASC 2 Video Interrupt */
-#define irq_asc1video		(ibase+125)	/* ASC 1 Video Interrupt */
-#define irq_comms_block_wd	(ibase+124)	/* ASC 1 Video Interrupt */
-#define irq_fdma_mailbox	(ibase+123)	/* FDMA Mailbox Output */
-#define irq_fdma_gp		(ibase+122)	/* FDMA GP Output */
-#define irq_mips_pic		(ibase+121)	/* MIPS Performance Counter
-						 * Interrupt */
-#define irq_mips_timer		(ibase+120)	/* MIPS Timer Interrupt */
-#define irq_memory_protect	(ibase+119)	/* Memory Protection Interrupt
-						 * -- Ored by glue logic inside
-						 *  SPARC ILC (see
-						 *  INT_MEM_PROT_STAT, below,
-						 *  for individual interrupts)
-						 */
-/* 118 unused (bit 22) */
-#define irq_sbag		(ibase+117)	/* SBAG Interrupt -- Ored by
-						 * glue logic inside SPARC ILC
-						 * (see INT_SBAG_STAT, below,
-						 * for individual interrupts) */
-#define irq_qam_b_fec		(ibase+116)	/* QAM	B FEC Interrupt */
-#define irq_qam_a_fec		(ibase+115)	/* QAM A FEC Interrupt */
-/* 114 unused	(bit 18) */
-#define irq_mailbox		(ibase+113)	/* Mailbox Debug Interrupt  --
-						 * Ored by glue logic inside
-						 * SPARC ILC (see
-						 * INT_MAILBOX_STAT, below, for
-						 * individual interrupts) */
-#define irq_fuse_stat1		(ibase+112)	/* Fuse Status 1 */
-#define irq_fuse_stat2		(ibase+111)	/* Fuse Status 2 */
-#define irq_fuse_stat3		(ibase+110)	/* Blitter Interrupt / Fuse
-						 * Status 3 */
-#define irq_blitter		(ibase+110)	/* Blitter Interrupt / Fuse
-						 * Status 3 */
-#define irq_avc1_pp0		(ibase+109)	/* AVC Decoder #1 PP0
-						 * Interrupt */
-#define irq_avc1_pp1		(ibase+108)	/* AVC Decoder #1 PP1
-						 * Interrupt */
-#define irq_avc1_mbe		(ibase+107)	/* AVC Decoder #1 MBE
-						 * Interrupt */
-#define irq_avc2_pp0		(ibase+106)	/* AVC Decoder #2 PP0
-						 * Interrupt */
-#define irq_avc2_pp1		(ibase+105)	/* AVC Decoder #2 PP1
-						 * Interrupt */
-#define irq_avc2_mbe		(ibase+104)	/* AVC Decoder #2 MBE
-						 * Interrupt */
-#define irq_zbug_spi		(ibase+103)	/* Zbug SPI Slave Interrupt */
-#define irq_qam_mod2		(ibase+102)	/* QAM Modulator 2 DMA
-						 * Interrupt */
-#define irq_ir_rx		(ibase+101)	/* IR RX 2 Interrupt */
-#define irq_aud_dsp2		(ibase+100)	/* Audio DSP #2 Interrupt */
-#define irq_aud_dsp1		(ibase+99)	/* Audio DSP #1 Interrupt */
-#define irq_docsis		(ibase+98)	/* DOCSIS Debug Interrupt */
-#define irq_sd_dvp1		(ibase+97)	/* SD DVP #1 Interrupt */
-#define irq_sd_dvp2		(ibase+96)	/* SD DVP #2 Interrupt */
-/*------------- Register: int_stat_2 */
-#define irq_hd_dvp		(ibase+95)	/* HD DVP Interrupt */
-#define kIrq_Prewatchdog	(ibase+94)	/* watchdog Pre-Interrupt */
-#define irq_timer2		(ibase+93)	/* Programmable Timer
-						 * Interrupt 2 */
-#define irq_1394		(ibase+92)	/* 1394 Firewire Interrupt */
-#define irq_usbohci		(ibase+91)	/* USB 2.0 OHCI Interrupt */
-#define irq_usbehci		(ibase+90)	/* USB 2.0 EHCI Interrupt */
-#define irq_pciexp		(ibase+89)	/* PCI Express 0 Interrupt */
-#define irq_pciexp0		(ibase+89)	/* PCI Express 0 Interrupt */
-#define irq_afe1		(ibase+88)	/* AFE 1 Interrupt */
-#define irq_sata		(ibase+87)	/* SATA 1 Interrupt */
-#define irq_sata1		(ibase+87)	/* SATA 1 Interrupt */
-#define irq_dtcp		(ibase+86)	/* DTCP Interrupt */
-#define irq_pciexp1		(ibase+85)	/* PCI Express 1 Interrupt */
-/* 84 unused	(bit 20) */
-/* 83 unused	(bit 19) */
-/* 82 unused	(bit 18) */
-#define irq_sata2		(ibase+81)	/* SATA2 Interrupt */
-#define irq_uart2		(ibase+80)	/* UART2 Interrupt */
-#define irq_legacy_usb		(ibase+79)	/* Legacy USB Host ISR (1.1
-						 * Host module) */
-#define irq_pod			(ibase+78)	/* POD Interrupt */
-#define irq_slave_usb		(ibase+77)	/* Slave USB */
-#define irq_denc1		(ibase+76)	/* DENC #1 VTG Interrupt */
-#define irq_vbi_vtg		(ibase+75)	/* VBI VTG Interrupt */
-#define irq_afe2		(ibase+74)	/* AFE 2 Interrupt */
-#define irq_denc2		(ibase+73)	/* DENC #2 VTG Interrupt */
-#define irq_asc2		(ibase+72)	/* ASC #2 Interrupt */
-#define irq_asc1		(ibase+71)	/* ASC #1 Interrupt */
-#define irq_mod_dma		(ibase+70)	/* Modulator DMA Interrupt */
-#define irq_byte_eng1		(ibase+69)	/* Byte Engine Interrupt [1] */
-#define irq_byte_eng0		(ibase+68)	/* Byte Engine Interrupt [0] */
-/* 67 unused	(bit 03) */
-/* 66 unused	(bit 02) */
-/* 65 unused	(bit 01) */
-/* 64 unused	(bit 00) */
-/*------------- Register: int_stat_1 */
-/* 63 unused	(bit 31) */
-/* 62 unused	(bit 30) */
-/* 61 unused	(bit 29) */
-/* 60 unused	(bit 28) */
-/* 59 unused	(bit 27) */
-/* 58 unused	(bit 26) */
-/* 57 unused	(bit 25) */
-/* 56 unused	(bit 24) */
-#define irq_buf_dma_mem2mem	(ibase+55)	/* BufDMA Memory to Memory
-						 * Interrupt */
-#define irq_buf_dma_usbtransmit (ibase+54)	/* BufDMA USB Transmit
-						 * Interrupt */
-#define irq_buf_dma_qpskpodtransmit (ibase+53)	/* BufDMA QPSK/POD Tramsit
-						 * Interrupt */
-#define irq_buf_dma_transmit_error (ibase+52)	/* BufDMA Transmit Error
-						 * Interrupt */
-#define irq_buf_dma_usbrecv	(ibase+51)	/* BufDMA USB Receive
-						 * Interrupt */
-#define irq_buf_dma_qpskpodrecv (ibase+50)	/* BufDMA QPSK/POD Receive
-						 * Interrupt */
-#define irq_buf_dma_recv_error	(ibase+49)	/* BufDMA Receive Error
-						 * Interrupt */
-#define irq_qamdma_transmit_play (ibase+48)	/* QAMDMA Transmit/Play
-						 * Interrupt */
-#define irq_qamdma_transmit_error (ibase+47)	/* QAMDMA Transmit Error
-						 * Interrupt */
-#define irq_qamdma_recv2high	(ibase+46)	/* QAMDMA Receive 2 High
-						 * (Chans 63-32) */
-#define irq_qamdma_recv2low	(ibase+45)	/* QAMDMA Receive 2 Low
-						 * (Chans 31-0) */
-#define irq_qamdma_recv1high	(ibase+44)	/* QAMDMA Receive 1 High
-						 * (Chans 63-32) */
-#define irq_qamdma_recv1low	(ibase+43)	/* QAMDMA Receive 1 Low
-						 * (Chans 31-0) */
-#define irq_qamdma_recv_error	(ibase+42)	/* QAMDMA Receive Error
-						 * Interrupt */
-#define irq_mpegsplice		(ibase+41)	/* MPEG Splice Interrupt */
-#define irq_deinterlace_rdy	(ibase+40)	/* Deinterlacer Frame Ready
-						 * Interrupt */
-#define irq_ext_in0		(ibase+39)	/* External Interrupt irq_in0 */
-#define irq_gpio3		(ibase+38)	/* GP I/O IRQ 3 - From GP I/O
-						 * Module */
-#define irq_gpio2		(ibase+37)	/* GP I/O IRQ 2 - From GP I/O
-						 * Module (ABE_intN) */
-#define irq_pcrcmplt1		(ibase+36)	/* PCR Capture Complete	 or
-						 * Discontinuity 1 */
-#define irq_pcrcmplt2		(ibase+35)	/* PCR Capture Complete or
-						 * Discontinuity 2 */
-#define irq_parse_peierr	(ibase+34)	/* PID Parser Error Detect
-						 * (PEI) */
-#define irq_parse_cont_err	(ibase+33)	/* PID Parser continuity error
-						 * detect */
-#define irq_ds1framer		(ibase+32)	/* DS1 Framer Interrupt */
-/*------------- Register: int_stat_0 */
-#define irq_gpio1		(ibase+31)	/* GP I/O IRQ 1 - From GP I/O
-						 * Module */
-#define irq_gpio0		(ibase+30)	/* GP I/O IRQ 0 - From GP I/O
-						 * Module */
-#define irq_qpsk_out_aloha	(ibase+29)	/* QPSK Output Slotted Aloha
-						 * (chan 3) Transmission
-						 * Completed OK */
-#define irq_qpsk_out_tdma	(ibase+28)	/* QPSK Output TDMA (chan 2)
-						 * Transmission Completed OK */
-#define irq_qpsk_out_reserve	(ibase+27)	/* QPSK Output Reservation
-						 * (chan 1) Transmission
-						 * Completed OK */
-#define irq_qpsk_out_aloha_err	(ibase+26)	/* QPSK Output Slotted Aloha
-						 * (chan 3)Transmission
-						 * completed with Errors. */
-#define irq_qpsk_out_tdma_err	(ibase+25)	/* QPSK Output TDMA (chan 2)
-						 * Transmission completed with
-						 * Errors. */
-#define irq_qpsk_out_rsrv_err	(ibase+24)	/* QPSK Output Reservation
-						 * (chan 1) Transmission
-						 * completed with Errors */
-#define irq_aloha_fail		(ibase+23)	/* Unsuccessful Resend of Aloha
-						 * for N times. Aloha retry
-						 * timeout for channel 3. */
-#define irq_timer1		(ibase+22)	/* Programmable Timer
-						 * Interrupt */
-#define irq_keyboard		(ibase+21)	/* Keyboard Module Interrupt */
-#define irq_i2c			(ibase+20)	/* I2C Module Interrupt */
-#define irq_spi			(ibase+19)	/* SPI Module Interrupt */
-#define irq_irblaster		(ibase+18)	/* IR Blaster Interrupt */
-#define irq_splice_detect	(ibase+17)	/* PID Key Change Interrupt or
-						 * Splice Detect Interrupt */
-#define irq_se_micro		(ibase+16)	/* Secure Micro I/F Module
-						 * Interrupt */
-#define irq_uart1		(ibase+15)	/* UART Interrupt */
-#define irq_irrecv		(ibase+14)	/* IR Receiver Interrupt */
-#define irq_host_int1		(ibase+13)	/* Host-to-Host Interrupt 1 */
-#define irq_host_int0		(ibase+12)	/* Host-to-Host Interrupt 0 */
-#define irq_qpsk_hecerr		(ibase+11)	/* QPSK HEC Error Interrupt */
-#define irq_qpsk_crcerr		(ibase+10)	/* QPSK AAL-5 CRC Error
-						 * Interrupt */
-/* 9 unused	(bit 09) */
-/* 8 unused	(bit 08) */
-#define irq_psicrcerr		(ibase+7)	/* QAM PSI CRC Error
-						 * Interrupt */
-#define irq_psilength_err	(ibase+6)	/* QAM PSI Length Error
-						 * Interrupt */
-#define irq_esfforward		(ibase+5)	/* ESF Interrupt Mark From
-						 * Forward Path Reference -
-						 * every 3ms when forward Mbits
-						 * and forward slot control
-						 * bytes are updated. */
-#define irq_esfreverse		(ibase+4)	/* ESF Interrupt Mark from
-						 * Reverse Path Reference -
-						 * delayed from forward mark by
-						 * the ranging delay plus a
-						 * fixed amount. When reverse
-						 * Mbits and reverse slot
-						 * control bytes are updated.
-						 * Occurs every 3ms for 3.0M and
-						 * 1.554 M upstream rates and
-						 * every 6 ms for 256K upstream
-						 * rate. */
-#define irq_aloha_timeout	(ibase+3)	/* Slotted-Aloha timeout on
-						 * Channel 1. */
-#define irq_reservation		(ibase+2)	/* Partial (or Incremental)
-						 * Reservation Message Completed
-						 * or Slotted aloha verify for
-						 * channel 1. */
-#define irq_aloha3		(ibase+1)	/* Slotted-Aloha Message Verify
-						 * Interrupt or Reservation
-						 * increment completed for
-						 * channel 3. */
-#define irq_mpeg_d		(ibase+0)	/* MPEG Decoder Interrupt */
-#endif	/* _ASM_MACH_POWERTV_INTERRUPTS_H_ */
diff --git a/arch/mips/include/asm/mach-powertv/ioremap.h b/arch/mips/include/asm/mach-powertv/ioremap.h
deleted file mode 100644
index c86ef09..0000000
--- a/arch/mips/include/asm/mach-powertv/ioremap.h
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- *
- * Portions Copyright (C)  Cisco Systems, Inc.
- */
-#ifndef __ASM_MACH_POWERTV_IOREMAP_H
-#define __ASM_MACH_POWERTV_IOREMAP_H
-
-#include <linux/types.h>
-#include <linux/log2.h>
-#include <linux/compiler.h>
-
-#include <asm/pgtable-bits.h>
-#include <asm/addrspace.h>
-
-/* We're going to mess with bits, so get sizes */
-#define IOR_BPC			8			/* Bits per char */
-#define IOR_PHYS_BITS		(IOR_BPC * sizeof(phys_addr_t))
-#define IOR_DMA_BITS		(IOR_BPC * sizeof(dma_addr_t))
-
-/*
- * Define the granularity of physical/DMA mapping in terms of the number
- * of bits that defines the offset within a grain. These will be the
- * least significant bits of the address. The rest of a physical or DMA
- * address will be used to index into an appropriate table to find the
- * offset to add to the address to yield the corresponding DMA or physical
- * address, respectively.
- */
-#define IOR_LSBITS		22			/* Bits in a grain */
-
-/*
- * Compute the number of most significant address bits after removing those
- * used for the offset within a grain and then compute the number of table
- * entries for the conversion.
- */
-#define IOR_PHYS_MSBITS		(IOR_PHYS_BITS - IOR_LSBITS)
-#define IOR_NUM_PHYS_TO_DMA	((phys_addr_t) 1 << IOR_PHYS_MSBITS)
-
-#define IOR_DMA_MSBITS		(IOR_DMA_BITS - IOR_LSBITS)
-#define IOR_NUM_DMA_TO_PHYS	((dma_addr_t) 1 << IOR_DMA_MSBITS)
-
-/*
- * Define data structures used as elements in the arrays for the conversion
- * between physical and DMA addresses. We do some slightly fancy math to
- * compute the width of the offset element of the conversion tables so
- * that we can have the smallest conversion tables. Next, round up the
- * sizes to the next higher power of two, i.e. the offset element will have
- * 8, 16, 32, 64, etc. bits. This eliminates the need to mask off any
- * bits.  Finally, we compute a shift value that puts the most significant
- * bits of the offset into the most significant bits of the offset element.
- * This makes it more efficient on processors without barrel shifters and
- * easier to see the values if the conversion table is dumped in binary.
- */
-#define _IOR_OFFSET_WIDTH(n)	(1 << order_base_2(n))
-#define IOR_OFFSET_WIDTH(n) \
-	(_IOR_OFFSET_WIDTH(n) < 8 ? 8 : _IOR_OFFSET_WIDTH(n))
-
-#define IOR_PHYS_OFFSET_BITS	IOR_OFFSET_WIDTH(IOR_PHYS_MSBITS)
-#define IOR_PHYS_SHIFT		(IOR_PHYS_BITS - IOR_PHYS_OFFSET_BITS)
-
-#define IOR_DMA_OFFSET_BITS	IOR_OFFSET_WIDTH(IOR_DMA_MSBITS)
-#define IOR_DMA_SHIFT		(IOR_DMA_BITS - IOR_DMA_OFFSET_BITS)
-
-struct ior_phys_to_dma {
-	dma_addr_t offset:IOR_DMA_OFFSET_BITS __packed
-		__aligned((IOR_DMA_OFFSET_BITS / IOR_BPC));
-};
-
-struct ior_dma_to_phys {
-	dma_addr_t offset:IOR_PHYS_OFFSET_BITS __packed
-		__aligned((IOR_PHYS_OFFSET_BITS / IOR_BPC));
-};
-
-extern struct ior_phys_to_dma _ior_phys_to_dma[IOR_NUM_PHYS_TO_DMA];
-extern struct ior_dma_to_phys _ior_dma_to_phys[IOR_NUM_DMA_TO_PHYS];
-
-static inline dma_addr_t _phys_to_dma_offset_raw(phys_addr_t phys)
-{
-	return (dma_addr_t)_ior_phys_to_dma[phys >> IOR_LSBITS].offset;
-}
-
-static inline dma_addr_t _dma_to_phys_offset_raw(dma_addr_t dma)
-{
-	return (dma_addr_t)_ior_dma_to_phys[dma >> IOR_LSBITS].offset;
-}
-
-/* These are not portable and should not be used in drivers. Drivers should
- * be using ioremap() and friends to map physical addresses to virtual
- * addresses and dma_map*() and friends to map virtual addresses into DMA
- * addresses and back.
- */
-static inline dma_addr_t phys_to_dma(phys_addr_t phys)
-{
-	return phys + (_phys_to_dma_offset_raw(phys) << IOR_PHYS_SHIFT);
-}
-
-static inline phys_addr_t dma_to_phys(dma_addr_t dma)
-{
-	return dma + (_dma_to_phys_offset_raw(dma) << IOR_DMA_SHIFT);
-}
-
-extern void ioremap_add_map(dma_addr_t phys, phys_addr_t alias,
-	dma_addr_t size);
-
-/*
- * Allow physical addresses to be fixed up to help peripherals located
- * outside the low 32-bit range -- generic pass-through version.
- */
-static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
-{
-	return phys_addr;
-}
-
-/*
- * Handle the special case of addresses the area aliased into the first
- * 512 MiB of the processor's physical address space. These turn into either
- * kseg0 or kseg1 addresses, depending on flags.
- */
-static inline void __iomem *plat_ioremap(phys_t start, unsigned long size,
-	unsigned long flags)
-{
-	phys_addr_t start_offset;
-	void __iomem *result = NULL;
-
-	/* Start by checking to see whether this is an aliased address */
-	start_offset = _dma_to_phys_offset_raw(start);
-
-	/*
-	 * If:
-	 * o	the memory is aliased into the first 512 MiB, and
-	 * o	the start and end are in the same RAM bank, and
-	 * o	we don't have a zero size or wrap around, and
-	 * o	we are supposed to create an uncached mapping,
-	 *	handle this is a kseg0 or kseg1 address
-	 */
-	if (start_offset != 0) {
-		phys_addr_t last;
-		dma_addr_t dma_to_phys_offset;
-
-		last = start + size - 1;
-		dma_to_phys_offset =
-			_dma_to_phys_offset_raw(last) << IOR_DMA_SHIFT;
-
-		if (dma_to_phys_offset == start_offset &&
-			size != 0 && start <= last) {
-			phys_t adjusted_start;
-			adjusted_start = start + start_offset;
-			if (flags == _CACHE_UNCACHED)
-				result = (void __iomem *) (unsigned long)
-					CKSEG1ADDR(adjusted_start);
-			else
-				result = (void __iomem *) (unsigned long)
-					CKSEG0ADDR(adjusted_start);
-		}
-	}
-
-	return result;
-}
-
-static inline int plat_iounmap(const volatile void __iomem *addr)
-{
-	return 0;
-}
-#endif /* __ASM_MACH_POWERTV_IOREMAP_H */
diff --git a/arch/mips/include/asm/mach-powertv/powertv-clock.h b/arch/mips/include/asm/mach-powertv/powertv-clock.h
deleted file mode 100644
index 6f3e9a0..0000000
--- a/arch/mips/include/asm/mach-powertv/powertv-clock.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2009  Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-/*
- * Local definitions for the powertv PCI code
- */
-
-#ifndef _POWERTV_PCI_POWERTV_PCI_H_
-#define _POWERTV_PCI_POWERTV_PCI_H_
-extern int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
-extern int asic_pcie_init(void);
-extern int asic_pcie_init(void);
-
-extern int log_level;
-#endif
diff --git a/arch/mips/include/asm/mach-powertv/war.h b/arch/mips/include/asm/mach-powertv/war.h
deleted file mode 100644
index c5651c8..0000000
--- a/arch/mips/include/asm/mach-powertv/war.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * This version for the PowerTV platform copied from the Malta version.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- * Portions copyright (C) 2009 Cisco Systems, Inc.
- */
-#ifndef __ASM_MACH_POWERTV_WAR_H
-#define __ASM_MACH_POWERTV_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR	0
-#define R4600_V1_HIT_CACHEOP_WAR	0
-#define R4600_V2_HIT_CACHEOP_WAR	0
-#define R5432_CP0_INTERRUPT_WAR		0
-#define BCM1250_M3_WAR			0
-#define SIBYTE_1956_WAR			0
-#define MIPS4K_ICACHE_REFILL_WAR	1
-#define MIPS_CACHE_SYNC_WAR		1
-#define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define ICACHE_REFILLS_WORKAROUND_WAR	1
-#define R10000_LLSC_WAR			0
-#define MIPS34K_MISSED_ITLB_WAR		0
-
-#endif /* __ASM_MACH_POWERTV_WAR_H */
diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
index 9809972..6f9b24f 100644
--- a/arch/mips/include/asm/mach-ralink/mt7620.h
+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
@@ -20,6 +20,8 @@
 #define SYSC_REG_CHIP_REV		0x0c
 #define SYSC_REG_SYSTEM_CONFIG0		0x10
 #define SYSC_REG_SYSTEM_CONFIG1		0x14
+#define SYSC_REG_CLKCFG0		0x2c
+#define SYSC_REG_CPU_SYS_CLKCFG		0x3c
 #define SYSC_REG_CPLL_CONFIG0		0x54
 #define SYSC_REG_CPLL_CONFIG1		0x58
 
@@ -29,20 +31,42 @@
 #define MT7620A_CHIP_NAME0		0x3637544d
 #define MT7620A_CHIP_NAME1		0x20203032
 
+#define SYSCFG0_XTAL_FREQ_SEL		BIT(6)
+
 #define CHIP_REV_PKG_MASK		0x1
 #define CHIP_REV_PKG_SHIFT		16
 #define CHIP_REV_VER_MASK		0xf
 #define CHIP_REV_VER_SHIFT		8
 #define CHIP_REV_ECO_MASK		0xf
 
-#define CPLL_SW_CONFIG_SHIFT		31
-#define CPLL_SW_CONFIG_MASK		0x1
-#define CPLL_CPU_CLK_SHIFT		24
-#define CPLL_CPU_CLK_MASK		0x1
-#define CPLL_MULT_RATIO_SHIFT           16
-#define CPLL_MULT_RATIO                 0x7
-#define CPLL_DIV_RATIO_SHIFT            10
-#define CPLL_DIV_RATIO                  0x3
+#define CLKCFG0_PERI_CLK_SEL		BIT(4)
+
+#define CPU_SYS_CLKCFG_OCP_RATIO_SHIFT	16
+#define CPU_SYS_CLKCFG_OCP_RATIO_MASK	0xf
+#define CPU_SYS_CLKCFG_OCP_RATIO_1	0	/* 1:1   (Reserved) */
+#define CPU_SYS_CLKCFG_OCP_RATIO_1_5	1	/* 1:1.5 (Reserved) */
+#define CPU_SYS_CLKCFG_OCP_RATIO_2	2	/* 1:2   */
+#define CPU_SYS_CLKCFG_OCP_RATIO_2_5	3       /* 1:2.5 (Reserved) */
+#define CPU_SYS_CLKCFG_OCP_RATIO_3	4	/* 1:3   */
+#define CPU_SYS_CLKCFG_OCP_RATIO_3_5	5	/* 1:3.5 (Reserved) */
+#define CPU_SYS_CLKCFG_OCP_RATIO_4	6	/* 1:4   */
+#define CPU_SYS_CLKCFG_OCP_RATIO_5	7	/* 1:5   */
+#define CPU_SYS_CLKCFG_OCP_RATIO_10	8	/* 1:10  */
+#define CPU_SYS_CLKCFG_CPU_FDIV_SHIFT	8
+#define CPU_SYS_CLKCFG_CPU_FDIV_MASK	0x1f
+#define CPU_SYS_CLKCFG_CPU_FFRAC_SHIFT	0
+#define CPU_SYS_CLKCFG_CPU_FFRAC_MASK	0x1f
+
+#define CPLL_CFG0_SW_CFG		BIT(31)
+#define CPLL_CFG0_PLL_MULT_RATIO_SHIFT	16
+#define CPLL_CFG0_PLL_MULT_RATIO_MASK   0x7
+#define CPLL_CFG0_LC_CURFCK		BIT(15)
+#define CPLL_CFG0_BYPASS_REF_CLK	BIT(14)
+#define CPLL_CFG0_PLL_DIV_RATIO_SHIFT	10
+#define CPLL_CFG0_PLL_DIV_RATIO_MASK	0x3
+
+#define CPLL_CFG1_CPU_AUX1		BIT(25)
+#define CPLL_CFG1_CPU_AUX0		BIT(24)
 
 #define SYSCFG0_DRAM_TYPE_MASK		0x3
 #define SYSCFG0_DRAM_TYPE_SHIFT		4
diff --git a/arch/mips/include/asm/mach-ralink/mt7620/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/mt7620/cpu-feature-overrides.h
new file mode 100644
index 0000000..f7bb8cf
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/mt7620/cpu-feature-overrides.h
@@ -0,0 +1,57 @@
+/*
+ * Ralink MT7620 specific CPU feature overrides
+ *
+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This file was derived from: include/asm-mips/cpu-features.h
+ *	Copyright (C) 2003, 2004 Ralf Baechle
+ *	Copyright (C) 2004 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+#ifndef _MT7620_CPU_FEATURE_OVERRIDES_H
+#define _MT7620_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_tlb		1
+#define cpu_has_4kex		1
+#define cpu_has_3k_cache	0
+#define cpu_has_4k_cache	1
+#define cpu_has_tx39_cache	0
+#define cpu_has_sb1_cache	0
+#define cpu_has_fpu		0
+#define cpu_has_32fpr		0
+#define cpu_has_counter		1
+#define cpu_has_watch		1
+#define cpu_has_divec		1
+
+#define cpu_has_prefetch	1
+#define cpu_has_ejtag		1
+#define cpu_has_llsc		1
+
+#define cpu_has_mips16		1
+#define cpu_has_mdmx		0
+#define cpu_has_mips3d		0
+#define cpu_has_smartmips	0
+
+#define cpu_has_mips32r1	1
+#define cpu_has_mips32r2	1
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+
+#define cpu_has_dsp		1
+#define cpu_has_dsp2		0
+#define cpu_has_mipsmt		0
+
+#define cpu_has_64bits		0
+#define cpu_has_64bit_zero_reg	0
+#define cpu_has_64bit_gp_regs	0
+#define cpu_has_64bit_addresses	0
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+
+#endif /* _MT7620_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mips-boards/piix4.h b/arch/mips/include/asm/mips-boards/piix4.h
index a02596c..e332279 100644
--- a/arch/mips/include/asm/mips-boards/piix4.h
+++ b/arch/mips/include/asm/mips-boards/piix4.h
@@ -1,6 +1,7 @@
 /*
  * Carsten Langgaard, carstenl@mips.com
  * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 2013 Imagination Technologies Ltd.
  *
  *  This program is free software; you can distribute it and/or modify it
  *  under the terms of the GNU General Public License (Version 2) as
@@ -20,61 +21,26 @@
 #ifndef __ASM_MIPS_BOARDS_PIIX4_H
 #define __ASM_MIPS_BOARDS_PIIX4_H
 
-/************************************************************************
- *  IO register offsets
- ************************************************************************/
-#define PIIX4_ICTLR1_ICW1	0x20
-#define PIIX4_ICTLR1_ICW2	0x21
-#define PIIX4_ICTLR1_ICW3	0x21
-#define PIIX4_ICTLR1_ICW4	0x21
-#define PIIX4_ICTLR2_ICW1	0xa0
-#define PIIX4_ICTLR2_ICW2	0xa1
-#define PIIX4_ICTLR2_ICW3	0xa1
-#define PIIX4_ICTLR2_ICW4	0xa1
-#define PIIX4_ICTLR1_OCW1	0x21
-#define PIIX4_ICTLR1_OCW2	0x20
-#define PIIX4_ICTLR1_OCW3	0x20
-#define PIIX4_ICTLR1_OCW4	0x20
-#define PIIX4_ICTLR2_OCW1	0xa1
-#define PIIX4_ICTLR2_OCW2	0xa0
-#define PIIX4_ICTLR2_OCW3	0xa0
-#define PIIX4_ICTLR2_OCW4	0xa0
-
-
-/************************************************************************
- *  Register encodings.
- ************************************************************************/
-#define PIIX4_OCW2_NSEOI	(0x1 << 5)
-#define PIIX4_OCW2_SEOI		(0x3 << 5)
-#define PIIX4_OCW2_RNSEOI	(0x5 << 5)
-#define PIIX4_OCW2_RAEOIS	(0x4 << 5)
-#define PIIX4_OCW2_RAEOIC	(0x0 << 5)
-#define PIIX4_OCW2_RSEOI	(0x7 << 5)
-#define PIIX4_OCW2_SP		(0x6 << 5)
-#define PIIX4_OCW2_NOP		(0x2 << 5)
-
-#define PIIX4_OCW2_SEL		(0x0 << 3)
-
-#define PIIX4_OCW2_ILS_0	0
-#define PIIX4_OCW2_ILS_1	1
-#define PIIX4_OCW2_ILS_2	2
-#define PIIX4_OCW2_ILS_3	3
-#define PIIX4_OCW2_ILS_4	4
-#define PIIX4_OCW2_ILS_5	5
-#define PIIX4_OCW2_ILS_6	6
-#define PIIX4_OCW2_ILS_7	7
-#define PIIX4_OCW2_ILS_8	0
-#define PIIX4_OCW2_ILS_9	1
-#define PIIX4_OCW2_ILS_10	2
-#define PIIX4_OCW2_ILS_11	3
-#define PIIX4_OCW2_ILS_12	4
-#define PIIX4_OCW2_ILS_13	5
-#define PIIX4_OCW2_ILS_14	6
-#define PIIX4_OCW2_ILS_15	7
-
-#define PIIX4_OCW3_SEL		(0x1 << 3)
-
-#define PIIX4_OCW3_IRR		0x2
-#define PIIX4_OCW3_ISR		0x3
+/* PIRQX Route Control */
+#define PIIX4_FUNC0_PIRQRC			0x60
+#define   PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_DISABLE	(1 << 7)
+#define   PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_MASK		0xf
+#define   PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_MAX		16
+/* Top Of Memory */
+#define PIIX4_FUNC0_TOM				0x69
+#define   PIIX4_FUNC0_TOM_TOP_OF_MEMORY_MASK		0xf0
+/* Deterministic Latency Control */
+#define PIIX4_FUNC0_DLC				0x82
+#define   PIIX4_FUNC0_DLC_USBPR_EN			(1 << 2)
+#define   PIIX4_FUNC0_DLC_PASSIVE_RELEASE_EN		(1 << 1)
+#define   PIIX4_FUNC0_DLC_DELAYED_TRANSACTION_EN	(1 << 0)
+
+/* IDE Timing */
+#define PIIX4_FUNC1_IDETIM_PRIMARY_LO		0x40
+#define PIIX4_FUNC1_IDETIM_PRIMARY_HI		0x41
+#define   PIIX4_FUNC1_IDETIM_PRIMARY_HI_IDE_DECODE_EN	(1 << 7)
+#define PIIX4_FUNC1_IDETIM_SECONDARY_LO		0x42
+#define PIIX4_FUNC1_IDETIM_SECONDARY_HI		0x43
+#define   PIIX4_FUNC1_IDETIM_SECONDARY_HI_IDE_DECODE_EN	(1 << 7)
 
 #endif /* __ASM_MIPS_BOARDS_PIIX4_H */
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index fed1c3e..e033141 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -603,6 +603,13 @@
 #define MIPS_CONF4_MMUEXTDEF	(_ULCAST_(3) << 14)
 #define MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT (_ULCAST_(1) << 14)
 
+#define MIPS_CONF5_NF		(_ULCAST_(1) << 0)
+#define MIPS_CONF5_UFR		(_ULCAST_(1) << 2)
+#define MIPS_CONF5_MSAEN	(_ULCAST_(1) << 27)
+#define MIPS_CONF5_EVA		(_ULCAST_(1) << 28)
+#define MIPS_CONF5_CV		(_ULCAST_(1) << 29)
+#define MIPS_CONF5_K		(_ULCAST_(1) << 30)
+
 #define MIPS_CONF6_SYND		(_ULCAST_(1) << 13)
 
 #define MIPS_CONF7_WII		(_ULCAST_(1) << 31)
diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h
index 3b29079..e277bba 100644
--- a/arch/mips/include/asm/mmu_context.h
+++ b/arch/mips/include/asm/mmu_context.h
@@ -24,21 +24,21 @@
 #endif /* SMTC */
 #include <asm-generic/mm_hooks.h>
 
-#ifdef CONFIG_MIPS_PGD_C0_CONTEXT
-
 #define TLBMISS_HANDLER_SETUP_PGD(pgd)					\
 do {									\
 	extern void tlbmiss_handler_setup_pgd(unsigned long);		\
 	tlbmiss_handler_setup_pgd((unsigned long)(pgd));		\
 } while (0)
 
+#ifdef CONFIG_MIPS_PGD_C0_CONTEXT
 #define TLBMISS_HANDLER_SETUP()						\
 	do {								\
 		TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir);		\
-		write_c0_xcontext((unsigned long) smp_processor_id() << 51); \
+		write_c0_xcontext((unsigned long) smp_processor_id() <<	\
+						SMP_CPUID_REGSHIFT);	\
 	} while (0)
 
-#else /* CONFIG_MIPS_PGD_C0_CONTEXT: using  pgd_current*/
+#else /* !CONFIG_MIPS_PGD_C0_CONTEXT: using  pgd_current*/
 
 /*
  * For the fast tlb miss handlers, we keep a per cpu array of pointers
@@ -47,21 +47,11 @@ do {									\
  */
 extern unsigned long pgd_current[];
 
-#define TLBMISS_HANDLER_SETUP_PGD(pgd) \
-	pgd_current[smp_processor_id()] = (unsigned long)(pgd)
-
-#ifdef CONFIG_32BIT
 #define TLBMISS_HANDLER_SETUP()						\
-	write_c0_context((unsigned long) smp_processor_id() << 25);	\
+	write_c0_context((unsigned long) smp_processor_id() <<		\
+						SMP_CPUID_REGSHIFT);	\
 	back_to_back_c0_hazard();					\
 	TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
-#endif
-#ifdef CONFIG_64BIT
-#define TLBMISS_HANDLER_SETUP()						\
-	write_c0_context((unsigned long) smp_processor_id() << 26);	\
-	back_to_back_c0_hazard();					\
-	TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
-#endif
 #endif /* CONFIG_MIPS_PGD_C0_CONTEXT*/
 #if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
 
diff --git a/arch/mips/include/asm/mutex.h b/arch/mips/include/asm/mutex.h
deleted file mode 100644
index 458c1f7..0000000
--- a/arch/mips/include/asm/mutex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/bridge.h b/arch/mips/include/asm/netlogic/xlp-hal/bridge.h
index 790f0f1..4e8eacb 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/bridge.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/bridge.h
@@ -88,6 +88,7 @@
 #define BRIDGE_DRAM_LIMIT6		0x22
 #define BRIDGE_DRAM_LIMIT7		0x23
 
+#define BRIDGE_DRAM_NODE_TRANSLN(i)	(0x24 + (i))
 #define BRIDGE_DRAM_NODE_TRANSLN0	0x24
 #define BRIDGE_DRAM_NODE_TRANSLN1	0x25
 #define BRIDGE_DRAM_NODE_TRANSLN2	0x26
@@ -96,6 +97,8 @@
 #define BRIDGE_DRAM_NODE_TRANSLN5	0x29
 #define BRIDGE_DRAM_NODE_TRANSLN6	0x2a
 #define BRIDGE_DRAM_NODE_TRANSLN7	0x2b
+
+#define BRIDGE_DRAM_CHNL_TRANSLN(i)	(0x2c + (i))
 #define BRIDGE_DRAM_CHNL_TRANSLN0	0x2c
 #define BRIDGE_DRAM_CHNL_TRANSLN1	0x2d
 #define BRIDGE_DRAM_CHNL_TRANSLN2	0x2e
@@ -104,6 +107,7 @@
 #define BRIDGE_DRAM_CHNL_TRANSLN5	0x31
 #define BRIDGE_DRAM_CHNL_TRANSLN6	0x32
 #define BRIDGE_DRAM_CHNL_TRANSLN7	0x33
+
 #define BRIDGE_PCIEMEM_BASE0		0x34
 #define BRIDGE_PCIEMEM_BASE1		0x35
 #define BRIDGE_PCIEMEM_BASE2		0x36
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/iomap.h b/arch/mips/include/asm/netlogic/xlp-hal/iomap.h
index 9fac46f..55eee77 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/iomap.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/iomap.h
@@ -72,6 +72,12 @@
 #define XLP_IO_USB_OHCI2_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 2, 4)
 #define XLP_IO_USB_OHCI3_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 2, 5)
 
+/* XLP2xx has an updated USB block */
+#define XLP2XX_IO_USB_OFFSET(node, i)	XLP_HDR_OFFSET(node, 0, 4, i)
+#define XLP2XX_IO_USB_XHCI0_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 4, 1)
+#define XLP2XX_IO_USB_XHCI1_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 4, 2)
+#define XLP2XX_IO_USB_XHCI2_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 4, 3)
+
 #define XLP_IO_NAE_OFFSET(node)		XLP_HDR_OFFSET(node, 0, 3, 0)
 #define XLP_IO_POE_OFFSET(node)		XLP_HDR_OFFSET(node, 0, 3, 1)
 
@@ -88,6 +94,9 @@
 #define XLP_IO_I2C0_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 6, 2)
 #define XLP_IO_I2C1_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 6, 3)
 #define XLP_IO_GPIO_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 6, 4)
+/* on 2XX, all I2C busses are on the same block */
+#define XLP2XX_IO_I2C_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 6, 7)
+
 /* system management */
 #define XLP_IO_SYS_OFFSET(node)		XLP_HDR_OFFSET(node, 0, 6, 5)
 #define XLP_IO_JTAG_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 6, 6)
@@ -145,6 +154,7 @@
 #define PCI_DEVICE_ID_NLM_NOR		0x1015
 #define PCI_DEVICE_ID_NLM_NAND		0x1016
 #define PCI_DEVICE_ID_NLM_MMC		0x1018
+#define PCI_DEVICE_ID_NLM_XHCI		0x101d
 
 #ifndef __ASSEMBLY__
 
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/pic.h b/arch/mips/include/asm/netlogic/xlp-hal/pic.h
index 4b5108d..105389b 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/pic.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/pic.h
@@ -208,13 +208,14 @@
 #define PIC_LOCAL_SCHEDULING		1
 #define PIC_GLOBAL_SCHEDULING		0
 
-#define PIC_CLK_HZ			133333333
-
 #define nlm_read_pic_reg(b, r)	nlm_read_reg64(b, r)
 #define nlm_write_pic_reg(b, r, v) nlm_write_reg64(b, r, v)
 #define nlm_get_pic_pcibase(node) nlm_pcicfg_base(XLP_IO_PIC_OFFSET(node))
 #define nlm_get_pic_regbase(node) (nlm_get_pic_pcibase(node) + XLP_IO_PCI_HDRSZ)
 
+/* We use PIC on node 0 as a timer */
+#define pic_timer_freq()		nlm_get_pic_frequency(0)
+
 /* IRT and h/w interrupt routines */
 static inline int
 nlm_pic_read_irt(uint64_t base, int irt_index)
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/sys.h b/arch/mips/include/asm/netlogic/xlp-hal/sys.h
index 470e52b..fcf2833c 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/sys.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/sys.h
@@ -117,6 +117,36 @@
 #define SYS_SCRTCH2				0x4b
 #define SYS_SCRTCH3				0x4c
 
+/* PLL registers XLP2XX */
+#define SYS_PLL_CTRL0				0x240
+#define SYS_PLL_CTRL1				0x241
+#define SYS_PLL_CTRL2				0x242
+#define SYS_PLL_CTRL3				0x243
+#define SYS_DMC_PLL_CTRL0			0x244
+#define SYS_DMC_PLL_CTRL1			0x245
+#define SYS_DMC_PLL_CTRL2			0x246
+#define SYS_DMC_PLL_CTRL3			0x247
+
+#define SYS_PLL_CTRL0_DEVX(x)			(0x248 + (x) * 4)
+#define SYS_PLL_CTRL1_DEVX(x)			(0x249 + (x) * 4)
+#define SYS_PLL_CTRL2_DEVX(x)			(0x24a + (x) * 4)
+#define SYS_PLL_CTRL3_DEVX(x)			(0x24b + (x) * 4)
+
+#define SYS_CPU_PLL_CHG_CTRL			0x288
+#define SYS_PLL_CHG_CTRL			0x289
+#define SYS_CLK_DEV_DIS				0x28a
+#define SYS_CLK_DEV_SEL				0x28b
+#define SYS_CLK_DEV_DIV				0x28c
+#define SYS_CLK_DEV_CHG				0x28d
+#define SYS_CLK_DEV_SEL_REG			0x28e
+#define SYS_CLK_DEV_DIV_REG			0x28f
+#define SYS_CPU_PLL_LOCK			0x29f
+#define SYS_SYS_PLL_LOCK			0x2a0
+#define SYS_PLL_MEM_CMD				0x2a1
+#define SYS_CPU_PLL_MEM_REQ			0x2a2
+#define SYS_SYS_PLL_MEM_REQ			0x2a3
+#define SYS_PLL_MEM_STAT			0x2a4
+
 #ifndef __ASSEMBLY__
 
 #define nlm_read_sys_reg(b, r)		nlm_read_reg(b, r)
@@ -124,5 +154,6 @@
 #define nlm_get_sys_pcibase(node) nlm_pcicfg_base(XLP_IO_SYS_OFFSET(node))
 #define nlm_get_sys_regbase(node) (nlm_get_sys_pcibase(node) + XLP_IO_PCI_HDRSZ)
 
+unsigned int nlm_get_pic_frequency(int node);
 #endif
 #endif
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/xlp.h b/arch/mips/include/asm/netlogic/xlp-hal/xlp.h
index f4ea0f7..17daffb2 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/xlp.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/xlp.h
@@ -41,15 +41,22 @@
 #define PIC_PCIE_LINK_1_IRQ		20
 #define PIC_PCIE_LINK_2_IRQ		21
 #define PIC_PCIE_LINK_3_IRQ		22
+
 #define PIC_EHCI_0_IRQ			23
 #define PIC_EHCI_1_IRQ			24
 #define PIC_OHCI_0_IRQ			25
 #define PIC_OHCI_1_IRQ			26
 #define PIC_OHCI_2_IRQ			27
 #define PIC_OHCI_3_IRQ			28
+#define PIC_2XX_XHCI_0_IRQ		23
+#define PIC_2XX_XHCI_1_IRQ		24
+#define PIC_2XX_XHCI_2_IRQ		25
+
 #define PIC_MMC_IRQ			29
 #define PIC_I2C_0_IRQ			30
 #define PIC_I2C_1_IRQ			31
+#define PIC_I2C_2_IRQ			32
+#define PIC_I2C_3_IRQ			33
 
 #ifndef __ASSEMBLY__
 
@@ -59,7 +66,17 @@ void xlp_wakeup_secondary_cpus(void);
 
 void xlp_mmu_init(void);
 void nlm_hal_init(void);
+int xlp_get_dram_map(int n, uint64_t *dram_map);
+
+/* Device tree related */
 void *xlp_dt_init(void *fdtp);
 
+static inline int cpu_is_xlpii(void)
+{
+	int chip = read_c0_prid() & 0xff00;
+
+	return chip == PRID_IMP_NETLOGIC_XLP2XX;
+}
+
 #endif /* !__ASSEMBLY__ */
 #endif /* _ASM_NLM_XLP_H */
diff --git a/arch/mips/include/asm/netlogic/xlr/pic.h b/arch/mips/include/asm/netlogic/xlr/pic.h
index 63c9917..3c80a75 100644
--- a/arch/mips/include/asm/netlogic/xlr/pic.h
+++ b/arch/mips/include/asm/netlogic/xlr/pic.h
@@ -36,6 +36,8 @@
 #define _ASM_NLM_XLR_PIC_H
 
 #define PIC_CLK_HZ			66666666
+#define pic_timer_freq()		PIC_CLK_HZ
+
 /* PIC hardware interrupt numbers */
 #define PIC_IRT_WD_INDEX		0
 #define PIC_IRT_TIMER_0_INDEX		1
diff --git a/arch/mips/include/asm/octeon/octeon.h b/arch/mips/include/asm/octeon/octeon.h
index a2eed23..f5d77b9 100644
--- a/arch/mips/include/asm/octeon/octeon.h
+++ b/arch/mips/include/asm/octeon/octeon.h
@@ -251,4 +251,6 @@ extern void (*octeon_irq_setup_secondary)(void);
 typedef void (*octeon_irq_ip4_handler_t)(void);
 void octeon_irq_set_ip4_handler(octeon_irq_ip4_handler_t);
 
+extern void octeon_fixup_irqs(void);
+
 #endif /* __ASM_OCTEON_OCTEON_H */
diff --git a/arch/mips/include/asm/parport.h b/arch/mips/include/asm/parport.h
deleted file mode 100644
index cf252af..0000000
--- a/arch/mips/include/asm/parport.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/parport.h>
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index fa8e0aa..12d6842 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -83,6 +83,18 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
 extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 	enum pci_mmap_state mmap_state, int write_combine);
 
+#define HAVE_ARCH_PCI_RESOURCE_TO_USER
+
+static inline void pci_resource_to_user(const struct pci_dev *dev, int bar,
+		const struct resource *rsrc, resource_size_t *start,
+		resource_size_t *end)
+{
+	phys_t size = resource_size(rsrc);
+
+	*start = fixup_bigphys_addr(rsrc->start, size);
+	*end = rsrc->start + size;
+}
+
 /*
  * Dynamic DMA mapping stuff.
  * MIPS has everything mapped statically.
@@ -136,11 +148,6 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 	return channel ? 15 : 14;
 }
 
-#ifdef CONFIG_CPU_CAVIUM_OCTEON
-/* MSI arch hook for OCTEON */
-#define arch_setup_msi_irqs arch_setup_msi_irqs
-#endif
-
 extern char * (*pcibios_plat_setup)(char *str);
 
 #ifdef CONFIG_OF
diff --git a/arch/mips/include/asm/percpu.h b/arch/mips/include/asm/percpu.h
deleted file mode 100644
index 844e763..0000000
--- a/arch/mips/include/asm/percpu.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_PERCPU_H
-#define __ASM_PERCPU_H
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ASM_PERCPU_H */
diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h
index 5e6cd09..7bba9da 100644
--- a/arch/mips/include/asm/ptrace.h
+++ b/arch/mips/include/asm/ptrace.h
@@ -81,7 +81,6 @@ static inline long regs_return_value(struct pt_regs *regs)
 
 #define instruction_pointer(regs) ((regs)->cp0_epc)
 #define profile_pc(regs) instruction_pointer(regs)
-#define user_stack_pointer(r) ((r)->regs[29])
 
 extern asmlinkage void syscall_trace_enter(struct pt_regs *regs);
 extern asmlinkage void syscall_trace_leave(struct pt_regs *regs);
@@ -100,4 +99,17 @@ static inline void die_if_kernel(const char *str, struct pt_regs *regs)
 	(struct pt_regs *)((sp | (THREAD_SIZE - 1)) + 1 - 32) - 1;	\
 })
 
+/* Helpers for working with the user stack pointer */
+
+static inline unsigned long user_stack_pointer(struct pt_regs *regs)
+{
+	return regs->regs[29];
+}
+
+static inline void user_stack_pointer_set(struct pt_regs *regs,
+	unsigned long val)
+{
+	regs->regs[29] = val;
+}
+
 #endif /* _ASM_PTRACE_H */
diff --git a/arch/mips/include/asm/r4kcache.h b/arch/mips/include/asm/r4kcache.h
index a0b2650..34d1a19 100644
--- a/arch/mips/include/asm/r4kcache.h
+++ b/arch/mips/include/asm/r4kcache.h
@@ -15,6 +15,7 @@
 #include <asm/asm.h>
 #include <asm/cacheops.h>
 #include <asm/cpu-features.h>
+#include <asm/cpu-type.h>
 #include <asm/mipsmtregs.h>
 
 /*
@@ -162,7 +163,15 @@ static inline void flush_scache_line_indexed(unsigned long addr)
 static inline void flush_icache_line(unsigned long addr)
 {
 	__iflush_prologue
-	cache_op(Hit_Invalidate_I, addr);
+	switch (boot_cpu_type()) {
+	case CPU_LOONGSON2:
+		cache_op(Hit_Invalidate_I_Loongson23, addr);
+		break;
+
+	default:
+		cache_op(Hit_Invalidate_I, addr);
+		break;
+	}
 	__iflush_epilogue
 }
 
@@ -208,7 +217,15 @@ static inline void flush_scache_line(unsigned long addr)
  */
 static inline void protected_flush_icache_line(unsigned long addr)
 {
-	protected_cache_op(Hit_Invalidate_I, addr);
+	switch (boot_cpu_type()) {
+	case CPU_LOONGSON2:
+		protected_cache_op(Hit_Invalidate_I_Loongson23, addr);
+		break;
+
+	default:
+		protected_cache_op(Hit_Invalidate_I, addr);
+		break;
+	}
 }
 
 /*
@@ -412,8 +429,8 @@ __BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64
 __BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128)
 
 /* build blast_xxx_range, protected_blast_xxx_range */
-#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \
-static inline void prot##blast_##pfx##cache##_range(unsigned long start, \
+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra)	\
+static inline void prot##extra##blast_##pfx##cache##_range(unsigned long start, \
 						    unsigned long end)	\
 {									\
 	unsigned long lsize = cpu_##desc##_line_size();			\
@@ -432,13 +449,15 @@ static inline void prot##blast_##pfx##cache##_range(unsigned long start, \
 	__##pfx##flush_epilogue						\
 }
 
-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_)
-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_)
-__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_)
-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, )
-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, )
+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, )
+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, )
+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, )
+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I_Loongson23, \
+	protected_, loongson23_)
+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , )
+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , )
 /* blast_inv_dcache_range */
-__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, )
-__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, )
+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , )
+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , )
 
 #endif /* _ASM_R4KCACHE_H */
diff --git a/arch/mips/include/asm/scatterlist.h b/arch/mips/include/asm/scatterlist.h
deleted file mode 100644
index 7ee0e64..0000000
--- a/arch/mips/include/asm/scatterlist.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_SCATTERLIST_H
-#define __ASM_SCATTERLIST_H
-
-#include <asm-generic/scatterlist.h>
-
-#endif /* __ASM_SCATTERLIST_H */
diff --git a/arch/mips/include/asm/sections.h b/arch/mips/include/asm/sections.h
deleted file mode 100644
index b7e3726..0000000
--- a/arch/mips/include/asm/sections.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_SECTIONS_H
-#define _ASM_SECTIONS_H
-
-#include <asm-generic/sections.h>
-
-#endif /* _ASM_SECTIONS_H */
diff --git a/arch/mips/include/asm/segment.h b/arch/mips/include/asm/segment.h
deleted file mode 100644
index 92ac001..0000000
--- a/arch/mips/include/asm/segment.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_SEGMENT_H
-#define _ASM_SEGMENT_H
-
-/* Only here because we have some old header files that expect it.. */
-
-#endif /* _ASM_SEGMENT_H */
diff --git a/arch/mips/include/asm/serial.h b/arch/mips/include/asm/serial.h
deleted file mode 100644
index a0cb0caf..0000000
--- a/arch/mips/include/asm/serial.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/serial.h>
diff --git a/arch/mips/include/asm/setup.h b/arch/mips/include/asm/setup.h
index e26589e..d7bfdeb 100644
--- a/arch/mips/include/asm/setup.h
+++ b/arch/mips/include/asm/setup.h
@@ -5,6 +5,14 @@
 
 extern void setup_early_printk(void);
 
+#ifdef CONFIG_EARLY_PRINTK_8250
+extern void setup_8250_early_printk_port(unsigned long base,
+	unsigned int reg_shift, unsigned int timeout);
+#else
+static inline void setup_8250_early_printk_port(unsigned long base,
+	unsigned int reg_shift, unsigned int timeout) {}
+#endif
+
 extern void set_handler(unsigned long offset, void *addr, unsigned long len);
 extern void set_uncached_handler(unsigned long offset, void *addr, unsigned long len);
 
diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h
index 23fc95e..4857e2c 100644
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
@@ -17,6 +17,7 @@
 #include <asm/asmmacro.h>
 #include <asm/mipsregs.h>
 #include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
 
 /*
  * For SMTC kernel, global IE should be left set, and interrupts
@@ -93,21 +94,8 @@
 		.endm
 
 #ifdef CONFIG_SMP
-#ifdef CONFIG_MIPS_MT_SMTC
-#define PTEBASE_SHIFT	19	/* TCBIND */
-#define CPU_ID_REG CP0_TCBIND
-#define CPU_ID_MFC0 mfc0
-#elif defined(CONFIG_MIPS_PGD_C0_CONTEXT)
-#define PTEBASE_SHIFT	48	/* XCONTEXT */
-#define CPU_ID_REG CP0_XCONTEXT
-#define CPU_ID_MFC0 MFC0
-#else
-#define PTEBASE_SHIFT	23	/* CONTEXT */
-#define CPU_ID_REG CP0_CONTEXT
-#define CPU_ID_MFC0 MFC0
-#endif
 		.macro	get_saved_sp	/* SMP variation */
-		CPU_ID_MFC0	k0, CPU_ID_REG
+		ASM_CPUID_MFC0	k0, ASM_SMP_CPUID_REG
 #if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
 		lui	k1, %hi(kernelsp)
 #else
@@ -117,17 +105,17 @@
 		daddiu	k1, %hi(kernelsp)
 		dsll	k1, 16
 #endif
-		LONG_SRL	k0, PTEBASE_SHIFT
+		LONG_SRL	k0, SMP_CPUID_PTRSHIFT
 		LONG_ADDU	k1, k0
 		LONG_L	k1, %lo(kernelsp)(k1)
 		.endm
 
 		.macro	set_saved_sp stackp temp temp2
-		CPU_ID_MFC0	\temp, CPU_ID_REG
-		LONG_SRL	\temp, PTEBASE_SHIFT
+		ASM_CPUID_MFC0	\temp, ASM_SMP_CPUID_REG
+		LONG_SRL	\temp, SMP_CPUID_PTRSHIFT
 		LONG_S	\stackp, kernelsp(\temp)
 		.endm
-#else
+#else /* !CONFIG_SMP */
 		.macro	get_saved_sp	/* Uniprocessor variation */
 #ifdef CONFIG_CPU_JUMP_WORKAROUNDS
 		/*
diff --git a/arch/mips/include/asm/syscall.h b/arch/mips/include/asm/syscall.h
new file mode 100644
index 0000000..81c8913
--- /dev/null
+++ b/arch/mips/include/asm/syscall.h
@@ -0,0 +1,116 @@
+/*
+ * Access to user system call parameters and results
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * See asm-generic/syscall.h for descriptions of what we must do here.
+ *
+ * Copyright (C) 2012 Ralf Baechle <ralf@linux-mips.org>
+ */
+
+#ifndef __ASM_MIPS_SYSCALL_H
+#define __ASM_MIPS_SYSCALL_H
+
+#include <linux/audit.h>
+#include <linux/elf-em.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+#include <asm/ptrace.h>
+
+static inline long syscall_get_nr(struct task_struct *task,
+				  struct pt_regs *regs)
+{
+	return regs->regs[2];
+}
+
+static inline unsigned long mips_get_syscall_arg(unsigned long *arg,
+	struct task_struct *task, struct pt_regs *regs, unsigned int n)
+{
+	unsigned long usp = regs->regs[29];
+
+	switch (n) {
+	case 0: case 1: case 2: case 3:
+		*arg = regs->regs[4 + n];
+
+		return 0;
+
+#ifdef CONFIG_32BIT
+	case 4: case 5: case 6: case 7:
+		return get_user(*arg, (int *)usp + 4 * n);
+#endif
+
+#ifdef CONFIG_64BIT
+	case 4: case 5: case 6: case 7:
+#ifdef CONFIG_MIPS32_O32
+		if (test_thread_flag(TIF_32BIT_REGS))
+			return get_user(*arg, (int *)usp + 4 * n);
+		else
+#endif
+			*arg = regs->regs[4 + n];
+
+		return 0;
+#endif
+
+	default:
+		BUG();
+	}
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->regs[2];
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	if (error) {
+		regs->regs[2] = -error;
+		regs->regs[7] = -1;
+	} else {
+		regs->regs[2] = val;
+		regs->regs[7] = 0;
+	}
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	unsigned long arg;
+	int ret;
+
+	while (n--)
+		ret |= mips_get_syscall_arg(&arg, task, regs, i++);
+
+	/*
+	 * No way to communicate an error because this is a void function.
+	 */
+#if 0
+	return ret;
+#endif
+}
+
+extern const unsigned long sys_call_table[];
+extern const unsigned long sys32_call_table[];
+extern const unsigned long sysn32_call_table[];
+
+static inline int __syscall_get_arch(void)
+{
+	int arch = EM_MIPS;
+#ifdef CONFIG_64BIT
+	arch |=  __AUDIT_ARCH_64BIT;
+#endif
+#if defined(__LITTLE_ENDIAN)
+	arch |=  __AUDIT_ARCH_LE;
+#endif
+	return arch;
+}
+
+#endif	/* __ASM_MIPS_SYSCALL_H */
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index 61215a3..f9b24bf 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -116,6 +116,7 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_32BIT_ADDR		23	/* 32-bit address space (o32/n32) */
 #define TIF_FPUBOUND		24	/* thread bound to FPU-full CPU set */
 #define TIF_LOAD_WATCH		25	/* If set, load watch registers */
+#define TIF_SYSCALL_TRACEPOINT	26	/* syscall tracepoint instrumentation */
 #define TIF_SYSCALL_TRACE	31	/* syscall trace active */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
@@ -132,21 +133,54 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_32BIT_ADDR		(1<<TIF_32BIT_ADDR)
 #define _TIF_FPUBOUND		(1<<TIF_FPUBOUND)
 #define _TIF_LOAD_WATCH		(1<<TIF_LOAD_WATCH)
+#define _TIF_SYSCALL_TRACEPOINT	(1<<TIF_SYSCALL_TRACEPOINT)
 
 #define _TIF_WORK_SYSCALL_ENTRY	(_TIF_NOHZ | _TIF_SYSCALL_TRACE |	\
-				 _TIF_SYSCALL_AUDIT)
+				 _TIF_SYSCALL_AUDIT | _TIF_SYSCALL_TRACEPOINT)
 
 /* work to do in syscall_trace_leave() */
 #define _TIF_WORK_SYSCALL_EXIT	(_TIF_NOHZ | _TIF_SYSCALL_TRACE |	\
-				 _TIF_SYSCALL_AUDIT)
+				 _TIF_SYSCALL_AUDIT | _TIF_SYSCALL_TRACEPOINT)
 
 /* work to do on interrupt/exception return */
 #define _TIF_WORK_MASK		\
 	(_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_NOTIFY_RESUME)
 /* work to do on any return to u-space */
 #define _TIF_ALLWORK_MASK	(_TIF_NOHZ | _TIF_WORK_MASK |		\
-				 _TIF_WORK_SYSCALL_EXIT)
+				 _TIF_WORK_SYSCALL_EXIT |		\
+				 _TIF_SYSCALL_TRACEPOINT)
 
-#endif /* __KERNEL__ */
+/*
+ * We stash processor id into a COP0 register to retrieve it fast
+ * at kernel exception entry.
+ */
+#if defined(CONFIG_MIPS_MT_SMTC)
+#define SMP_CPUID_REG		2, 2	/* TCBIND */
+#define ASM_SMP_CPUID_REG	$2, 2
+#define SMP_CPUID_PTRSHIFT	19
+#elif defined(CONFIG_MIPS_PGD_C0_CONTEXT)
+#define SMP_CPUID_REG		20, 0	/* XCONTEXT */
+#define ASM_SMP_CPUID_REG	$20
+#define SMP_CPUID_PTRSHIFT	48
+#else
+#define SMP_CPUID_REG		4, 0	/* CONTEXT */
+#define ASM_SMP_CPUID_REG	$4
+#define SMP_CPUID_PTRSHIFT	23
+#endif
 
+#ifdef CONFIG_64BIT
+#define SMP_CPUID_REGSHIFT	(SMP_CPUID_PTRSHIFT + 3)
+#else
+#define SMP_CPUID_REGSHIFT	(SMP_CPUID_PTRSHIFT + 2)
+#endif
+
+#ifdef CONFIG_MIPS_MT_SMTC
+#define ASM_CPUID_MFC0		mfc0
+#define UASM_i_CPUID_MFC0	uasm_i_mfc0
+#else
+#define ASM_CPUID_MFC0		MFC0
+#define UASM_i_CPUID_MFC0	UASM_i_MFC0
+#endif
+
+#endif /* __KERNEL__ */
 #endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h
index 2d7b9df..24f534a 100644
--- a/arch/mips/include/asm/time.h
+++ b/arch/mips/include/asm/time.h
@@ -75,7 +75,7 @@ extern int init_r4k_clocksource(void);
 
 static inline int init_mips_clocksource(void)
 {
-#if defined(CONFIG_CSRC_R4K) && !defined(CONFIG_CSRC_GIC)
+#ifdef CONFIG_CSRC_R4K
 	return init_r4k_clocksource();
 #else
 	return 0;
diff --git a/arch/mips/include/asm/timex.h b/arch/mips/include/asm/timex.h
index 6529704..c542475 100644
--- a/arch/mips/include/asm/timex.h
+++ b/arch/mips/include/asm/timex.h
@@ -10,7 +10,9 @@
 
 #ifdef __KERNEL__
 
+#include <asm/cpu-features.h>
 #include <asm/mipsregs.h>
+#include <asm/cpu-type.h>
 
 /*
  * This is the clock rate of the i8253 PIT.  A MIPS system may not have
@@ -33,9 +35,38 @@
 
 typedef unsigned int cycles_t;
 
+/*
+ * On R4000/R4400 before version 5.0 an erratum exists such that if the
+ * cycle counter is read in the exact moment that it is matching the
+ * compare register, no interrupt will be generated.
+ *
+ * There is a suggested workaround and also the erratum can't strike if
+ * the compare interrupt isn't being used as the clock source device.
+ * However for now the implementaton of this function doesn't get these
+ * fine details right.
+ */
 static inline cycles_t get_cycles(void)
 {
-	return 0;
+	switch (boot_cpu_type()) {
+	case CPU_R4400PC:
+	case CPU_R4400SC:
+	case CPU_R4400MC:
+		if ((read_c0_prid() & 0xff) >= 0x0050)
+			return read_c0_count();
+		break;
+
+        case CPU_R4000PC:
+        case CPU_R4000SC:
+        case CPU_R4000MC:
+		break;
+
+	default:
+		if (cpu_has_counter)
+			return read_c0_count();
+		break;
+	}
+
+	return 0;	/* no usable counter */
 }
 
 #endif /* __KERNEL__ */
diff --git a/arch/mips/include/asm/ucontext.h b/arch/mips/include/asm/ucontext.h
deleted file mode 100644
index 9bc07b9..0000000
--- a/arch/mips/include/asm/ucontext.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ucontext.h>
diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h
index 63c9c88..4d3b928 100644
--- a/arch/mips/include/asm/unistd.h
+++ b/arch/mips/include/asm/unistd.h
@@ -14,6 +14,13 @@
 
 #include <uapi/asm/unistd.h>
 
+#ifdef CONFIG_MIPS32_N32
+#define NR_syscalls  (__NR_N32_Linux + __NR_N32_Linux_syscalls)
+#elif defined(CONFIG_64BIT)
+#define NR_syscalls  (__NR_64_Linux + __NR_64_Linux_syscalls)
+#else
+#define NR_syscalls  (__NR_O32_Linux + __NR_O32_Linux_syscalls)
+#endif
 
 #ifndef __ASSEMBLY__
 
diff --git a/arch/mips/include/asm/vga.h b/arch/mips/include/asm/vga.h
index f4cff7e..f82c837 100644
--- a/arch/mips/include/asm/vga.h
+++ b/arch/mips/include/asm/vga.h
@@ -6,6 +6,7 @@
 #ifndef _ASM_VGA_H
 #define _ASM_VGA_H
 
+#include <asm/addrspace.h>
 #include <asm/byteorder.h>
 
 /*
@@ -13,7 +14,7 @@
  *	access the videoram directly without any black magic.
  */
 
-#define VGA_MAP_MEM(x, s)	(0xb0000000L + (unsigned long)(x))
+#define VGA_MAP_MEM(x, s)	CKSEG1ADDR(0x10000000L + (unsigned long)(x))
 
 #define vga_readb(x)	(*(x))
 #define vga_writeb(x, y)	(*(y) = (x))
diff --git a/arch/mips/include/asm/xor.h b/arch/mips/include/asm/xor.h
deleted file mode 100644
index c82eb12..0000000
--- a/arch/mips/include/asm/xor.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/xor.h>
diff --git a/arch/mips/include/uapi/asm/Kbuild b/arch/mips/include/uapi/asm/Kbuild
index 350cccc..be7196e 100644
--- a/arch/mips/include/uapi/asm/Kbuild
+++ b/arch/mips/include/uapi/asm/Kbuild
@@ -1,7 +1,9 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
 
-header-y += auxvec.h
+generic-y += auxvec.h
+generic-y += ipcbuf.h
+
 header-y += bitsperlong.h
 header-y += break.h
 header-y += byteorder.h
@@ -11,7 +13,6 @@ header-y += fcntl.h
 header-y += inst.h
 header-y += ioctl.h
 header-y += ioctls.h
-header-y += ipcbuf.h
 header-y += kvm_para.h
 header-y += mman.h
 header-y += msgbuf.h
diff --git a/arch/mips/include/uapi/asm/auxvec.h b/arch/mips/include/uapi/asm/auxvec.h
deleted file mode 100644
index 7cf7f2d..0000000
--- a/arch/mips/include/uapi/asm/auxvec.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef _ASM_AUXVEC_H
-#define _ASM_AUXVEC_H
-
-#endif /* _ASM_AUXVEC_H */
diff --git a/arch/mips/include/uapi/asm/ipcbuf.h b/arch/mips/include/uapi/asm/ipcbuf.h
deleted file mode 100644
index 84c7e51..0000000
--- a/arch/mips/include/uapi/asm/ipcbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ipcbuf.h>
diff --git a/arch/mips/include/uapi/asm/siginfo.h b/arch/mips/include/uapi/asm/siginfo.h
index 88e292b..e811744 100644
--- a/arch/mips/include/uapi/asm/siginfo.h
+++ b/arch/mips/include/uapi/asm/siginfo.h
@@ -33,6 +33,8 @@ struct siginfo;
 #error _MIPS_SZLONG neither 32 nor 64
 #endif
 
+#define __ARCH_SIGSYS
+
 #include <asm-generic/siginfo.h>
 
 typedef struct siginfo {
@@ -97,6 +99,13 @@ typedef struct siginfo {
 			__ARCH_SI_BAND_T _band; /* POLL_IN, POLL_OUT, POLL_MSG */
 			int _fd;
 		} _sigpoll;
+
+		/* SIGSYS */
+		struct {
+			void __user *_call_addr; /* calling user insn */
+			int _syscall;	/* triggering system call number */
+			unsigned int _arch;	/* AUDIT_ARCH_* of syscall */
+		} _sigsys;
 	} _sifields;
 } siginfo_t;
 
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 423d871..1c1b717 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -26,7 +26,6 @@ obj-$(CONFIG_CEVT_TXX9)		+= cevt-txx9.o
 obj-$(CONFIG_CSRC_BCM1480)	+= csrc-bcm1480.o
 obj-$(CONFIG_CSRC_GIC)		+= csrc-gic.o
 obj-$(CONFIG_CSRC_IOASIC)	+= csrc-ioasic.o
-obj-$(CONFIG_CSRC_POWERTV)	+= csrc-powertv.o
 obj-$(CONFIG_CSRC_R4K)		+= csrc-r4k.o
 obj-$(CONFIG_CSRC_SB1250)	+= csrc-sb1250.o
 obj-$(CONFIG_SYNC_R4K)		+= sync-r4k.o
@@ -35,6 +34,7 @@ obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_MODULES)		+= mips_ksyms.o module.o
 obj-$(CONFIG_MODULES_USE_ELF_RELA) += module-rela.o
 
+obj-$(CONFIG_FTRACE_SYSCALLS)	+= ftrace.o
 obj-$(CONFIG_FUNCTION_TRACER)	+= mcount.o ftrace.o
 
 obj-$(CONFIG_CPU_R4K_FPU)	+= r4k_fpu.o r4k_switch.o
@@ -84,6 +84,7 @@ obj-$(CONFIG_GPIO_TXX9)		+= gpio_txx9.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o crash.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
+obj-$(CONFIG_EARLY_PRINTK_8250)	+= early_printk_8250.o
 obj-$(CONFIG_SPINLOCK_TEST)	+= spinlock_test.o
 obj-$(CONFIG_MIPS_MACHINE)	+= mips_machine.o
 
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 4c6167a..c814287 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -20,6 +20,7 @@
 
 #include <asm/bugs.h>
 #include <asm/cpu.h>
+#include <asm/cpu-type.h>
 #include <asm/fpu.h>
 #include <asm/mipsregs.h>
 #include <asm/watch.h>
@@ -55,7 +56,7 @@ static inline void check_errata(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 
-	switch (c->cputype) {
+	switch (current_cpu_type()) {
 	case CPU_34K:
 		/*
 		 * Erratum "RPS May Cause Incorrect Instruction Execution"
@@ -122,7 +123,7 @@ static inline unsigned long cpu_get_fpu_id(void)
  */
 static inline int __cpu_has_fpu(void)
 {
-	return ((cpu_get_fpu_id() & 0xff00) != FPIR_IMP_NONE);
+	return ((cpu_get_fpu_id() & FPIR_IMP_MASK) != FPIR_IMP_NONE);
 }
 
 static inline void cpu_probe_vmbits(struct cpuinfo_mips *c)
@@ -290,6 +291,17 @@ static inline unsigned int decode_config4(struct cpuinfo_mips *c)
 	return config4 & MIPS_CONF_M;
 }
 
+static inline unsigned int decode_config5(struct cpuinfo_mips *c)
+{
+	unsigned int config5;
+
+	config5 = read_c0_config5();
+	config5 &= ~MIPS_CONF5_UFR;
+	write_c0_config5(config5);
+
+	return config5 & MIPS_CONF_M;
+}
+
 static void decode_configs(struct cpuinfo_mips *c)
 {
 	int ok;
@@ -310,6 +322,8 @@ static void decode_configs(struct cpuinfo_mips *c)
 		ok = decode_config3(c);
 	if (ok)
 		ok = decode_config4(c);
+	if (ok)
+		ok = decode_config5(c);
 
 	mips_probe_watch_registers(c);
 
@@ -322,7 +336,7 @@ static void decode_configs(struct cpuinfo_mips *c)
 
 static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 {
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_R2000:
 		c->cputype = CPU_R2000;
 		__cpu_name[cpu] = "R2000";
@@ -333,7 +347,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		c->tlbsize = 64;
 		break;
 	case PRID_IMP_R3000:
-		if ((c->processor_id & 0xff) == PRID_REV_R3000A) {
+		if ((c->processor_id & PRID_REV_MASK) == PRID_REV_R3000A) {
 			if (cpu_has_confreg()) {
 				c->cputype = CPU_R3081E;
 				__cpu_name[cpu] = "R3081";
@@ -353,7 +367,8 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		break;
 	case PRID_IMP_R4000:
 		if (read_c0_config() & CONF_SC) {
-			if ((c->processor_id & 0xff) >= PRID_REV_R4400) {
+			if ((c->processor_id & PRID_REV_MASK) >=
+			    PRID_REV_R4400) {
 				c->cputype = CPU_R4400PC;
 				__cpu_name[cpu] = "R4400PC";
 			} else {
@@ -361,12 +376,33 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 				__cpu_name[cpu] = "R4000PC";
 			}
 		} else {
-			if ((c->processor_id & 0xff) >= PRID_REV_R4400) {
-				c->cputype = CPU_R4400SC;
-				__cpu_name[cpu] = "R4400SC";
+			int cca = read_c0_config() & CONF_CM_CMASK;
+			int mc;
+
+			/*
+			 * SC and MC versions can't be reliably told apart,
+			 * but only the latter support coherent caching
+			 * modes so assume the firmware has set the KSEG0
+			 * coherency attribute reasonably (if uncached, we
+			 * assume SC).
+			 */
+			switch (cca) {
+			case CONF_CM_CACHABLE_CE:
+			case CONF_CM_CACHABLE_COW:
+			case CONF_CM_CACHABLE_CUW:
+				mc = 1;
+				break;
+			default:
+				mc = 0;
+				break;
+			}
+			if ((c->processor_id & PRID_REV_MASK) >=
+			    PRID_REV_R4400) {
+				c->cputype = mc ? CPU_R4400MC : CPU_R4400SC;
+				__cpu_name[cpu] = mc ? "R4400MC" : "R4400SC";
 			} else {
-				c->cputype = CPU_R4000SC;
-				__cpu_name[cpu] = "R4000SC";
+				c->cputype = mc ? CPU_R4000MC : CPU_R4000SC;
+				__cpu_name[cpu] = mc ? "R4000MC" : "R4000SC";
 			}
 		}
 
@@ -454,7 +490,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 			__cpu_name[cpu] = "TX3927";
 			c->tlbsize = 64;
 		} else {
-			switch (c->processor_id & 0xff) {
+			switch (c->processor_id & PRID_REV_MASK) {
 			case PRID_REV_TX3912:
 				c->cputype = CPU_TX3912;
 				__cpu_name[cpu] = "TX3912";
@@ -640,7 +676,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	decode_configs(c);
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_4KC:
 		c->cputype = CPU_4KC;
 		__cpu_name[cpu] = "MIPS 4Kc";
@@ -711,7 +747,7 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
 static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	decode_configs(c);
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_AU1_REV1:
 	case PRID_IMP_AU1_REV2:
 		c->cputype = CPU_ALCHEMY;
@@ -730,7 +766,7 @@ static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu)
 			break;
 		case 4:
 			__cpu_name[cpu] = "Au1200";
-			if ((c->processor_id & 0xff) == 2)
+			if ((c->processor_id & PRID_REV_MASK) == 2)
 				__cpu_name[cpu] = "Au1250";
 			break;
 		case 5:
@@ -748,12 +784,12 @@ static inline void cpu_probe_sibyte(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	decode_configs(c);
 
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_SB1:
 		c->cputype = CPU_SB1;
 		__cpu_name[cpu] = "SiByte SB1";
 		/* FPU in pass1 is known to have issues. */
-		if ((c->processor_id & 0xff) < 0x02)
+		if ((c->processor_id & PRID_REV_MASK) < 0x02)
 			c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
 		break;
 	case PRID_IMP_SB1A:
@@ -766,7 +802,7 @@ static inline void cpu_probe_sibyte(struct cpuinfo_mips *c, unsigned int cpu)
 static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	decode_configs(c);
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_SR71000:
 		c->cputype = CPU_SR71000;
 		__cpu_name[cpu] = "Sandcraft SR71000";
@@ -779,7 +815,7 @@ static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c, unsigned int cpu)
 static inline void cpu_probe_nxp(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	decode_configs(c);
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_PR4450:
 		c->cputype = CPU_PR4450;
 		__cpu_name[cpu] = "Philips PR4450";
@@ -791,7 +827,7 @@ static inline void cpu_probe_nxp(struct cpuinfo_mips *c, unsigned int cpu)
 static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	decode_configs(c);
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_BMIPS32_REV4:
 	case PRID_IMP_BMIPS32_REV8:
 		c->cputype = CPU_BMIPS32;
@@ -806,7 +842,7 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 		set_elf_platform(cpu, "bmips3300");
 		break;
 	case PRID_IMP_BMIPS43XX: {
-		int rev = c->processor_id & 0xff;
+		int rev = c->processor_id & PRID_REV_MASK;
 
 		if (rev >= PRID_REV_BMIPS4380_LO &&
 				rev <= PRID_REV_BMIPS4380_HI) {
@@ -832,7 +868,7 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	decode_configs(c);
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_CAVIUM_CN38XX:
 	case PRID_IMP_CAVIUM_CN31XX:
 	case PRID_IMP_CAVIUM_CN30XX:
@@ -852,10 +888,17 @@ platform:
 	case PRID_IMP_CAVIUM_CN63XX:
 	case PRID_IMP_CAVIUM_CN66XX:
 	case PRID_IMP_CAVIUM_CN68XX:
+	case PRID_IMP_CAVIUM_CNF71XX:
 		c->cputype = CPU_CAVIUM_OCTEON2;
 		__cpu_name[cpu] = "Cavium Octeon II";
 		set_elf_platform(cpu, "octeon2");
 		break;
+	case PRID_IMP_CAVIUM_CN70XX:
+	case PRID_IMP_CAVIUM_CN78XX:
+		c->cputype = CPU_CAVIUM_OCTEON3;
+		__cpu_name[cpu] = "Cavium Octeon III";
+		set_elf_platform(cpu, "octeon3");
+		break;
 	default:
 		printk(KERN_INFO "Unknown Octeon chip!\n");
 		c->cputype = CPU_UNKNOWN;
@@ -868,7 +911,7 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
 	decode_configs(c);
 	/* JZRISC does not implement the CP0 counter. */
 	c->options &= ~MIPS_CPU_COUNTER;
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_JZRISC:
 		c->cputype = CPU_JZRISC;
 		__cpu_name[cpu] = "Ingenic JZRISC";
@@ -883,7 +926,7 @@ static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu)
 {
 	decode_configs(c);
 
-	if ((c->processor_id & 0xff00) == PRID_IMP_NETLOGIC_AU13XX) {
+	if ((c->processor_id & PRID_IMP_MASK) == PRID_IMP_NETLOGIC_AU13XX) {
 		c->cputype = CPU_ALCHEMY;
 		__cpu_name[cpu] = "Au1300";
 		/* following stuff is not for Alchemy */
@@ -898,7 +941,12 @@ static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu)
 			MIPS_CPU_EJTAG	 |
 			MIPS_CPU_LLSC);
 
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
+	case PRID_IMP_NETLOGIC_XLP2XX:
+		c->cputype = CPU_XLP;
+		__cpu_name[cpu] = "Broadcom XLPII";
+		break;
+
 	case PRID_IMP_NETLOGIC_XLP8XX:
 	case PRID_IMP_NETLOGIC_XLP3XX:
 		c->cputype = CPU_XLP;
@@ -972,7 +1020,7 @@ void cpu_probe(void)
 	c->cputype	= CPU_UNKNOWN;
 
 	c->processor_id = read_c0_prid();
-	switch (c->processor_id & 0xff0000) {
+	switch (c->processor_id & PRID_COMP_MASK) {
 	case PRID_COMP_LEGACY:
 		cpu_probe_legacy(c, cpu);
 		break;
@@ -1051,8 +1099,8 @@ void cpu_report(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 
-	printk(KERN_INFO "CPU revision is: %08x (%s)\n",
-	       c->processor_id, cpu_name_string());
+	pr_info("CPU%d revision is: %08x (%s)\n",
+		smp_processor_id(), c->processor_id, cpu_name_string());
 	if (c->options & MIPS_CPU_FPU)
 		printk(KERN_INFO "FPU revision is: %08x\n", c->fpu_id);
 }
diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c
index 0654bff..6cbbf6e 100644
--- a/arch/mips/kernel/csrc-ioasic.c
+++ b/arch/mips/kernel/csrc-ioasic.c
@@ -37,13 +37,13 @@ static struct clocksource clocksource_dec = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-void __init dec_ioasic_clocksource_init(void)
+int __init dec_ioasic_clocksource_init(void)
 {
 	unsigned int freq;
 	u32 start, end;
-	int i = HZ / 10;
-
+	int i = HZ / 8;
 
+	ds1287_timer_state();
 	while (!ds1287_timer_state())
 		;
 
@@ -55,9 +55,15 @@ void __init dec_ioasic_clocksource_init(void)
 
 	end = dec_ioasic_hpt_read(&clocksource_dec);
 
-	freq = (end - start) * 10;
+	freq = (end - start) * 8;
+
+	/* An early revision of the I/O ASIC didn't have the counter.  */
+	if (!freq)
+		return -ENXIO;
+
 	printk(KERN_INFO "I/O ASIC clock frequency %dHz\n", freq);
 
 	clocksource_dec.rating = 200 + freq / 10000000;
 	clocksource_register_hz(&clocksource_dec, freq);
+	return 0;
 }
diff --git a/arch/mips/kernel/csrc-powertv.c b/arch/mips/kernel/csrc-powertv.c
deleted file mode 100644
index abd99ea..0000000
--- a/arch/mips/kernel/csrc-powertv.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Copyright (C) 2008 Scientific-Atlanta, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-/*
- * The file comes from kernel/csrc-r4k.c
- */
-#include <linux/clocksource.h>
-#include <linux/init.h>
-
-#include <asm/time.h>			/* Not included in linux/time.h */
-
-#include <asm/mach-powertv/asic_regs.h>
-#include "powertv-clock.h"
-
-/* MIPS PLL Register Definitions */
-#define PLL_GET_M(x)		(((x) >> 8) & 0x000000FF)
-#define PLL_GET_N(x)		(((x) >> 16) & 0x000000FF)
-#define PLL_GET_P(x)		(((x) >> 24) & 0x00000007)
-
-/*
- * returns:  Clock frequency in kHz
- */
-unsigned int __init mips_get_pll_freq(void)
-{
-	unsigned int pll_reg, m, n, p;
-	unsigned int fin = 54000; /* Base frequency in kHz */
-	unsigned int fout;
-
-	/* Read PLL register setting */
-	pll_reg = asic_read(mips_pll_setup);
-	m = PLL_GET_M(pll_reg);
-	n = PLL_GET_N(pll_reg);
-	p = PLL_GET_P(pll_reg);
-	pr_info("MIPS PLL Register:0x%x	 M=%d  N=%d  P=%d\n", pll_reg, m, n, p);
-
-	/* Calculate clock frequency = (2 * N * 54MHz) / (M * (2**P)) */
-	fout = ((2 * n * fin) / (m * (0x01 << p)));
-
-	pr_info("MIPS Clock Freq=%d kHz\n", fout);
-
-	return fout;
-}
-
-static cycle_t c0_hpt_read(struct clocksource *cs)
-{
-	return read_c0_count();
-}
-
-static struct clocksource clocksource_mips = {
-	.name		= "powertv-counter",
-	.read		= c0_hpt_read,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static void __init powertv_c0_hpt_clocksource_init(void)
-{
-	unsigned int pll_freq = mips_get_pll_freq();
-
-	pr_info("CPU frequency %d.%02d MHz\n", pll_freq / 1000,
-		(pll_freq % 1000) * 100 / 1000);
-
-	mips_hpt_frequency = pll_freq / 2 * 1000;
-
-	clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
-
-	clocksource_register_hz(&clocksource_mips, mips_hpt_frequency);
-}
-
-/**
- * struct tim_c - free running counter
- * @hi: High 16 bits of the counter
- * @lo: Low 32 bits of the counter
- *
- * Lays out the structure of the free running counter in memory. This counter
- * increments at a rate of 27 MHz/8 on all platforms.
- */
-struct tim_c {
-	unsigned int hi;
-	unsigned int lo;
-};
-
-static struct tim_c *tim_c;
-
-static cycle_t tim_c_read(struct clocksource *cs)
-{
-	unsigned int hi;
-	unsigned int next_hi;
-	unsigned int lo;
-
-	hi = readl(&tim_c->hi);
-
-	for (;;) {
-		lo = readl(&tim_c->lo);
-		next_hi = readl(&tim_c->hi);
-		if (next_hi == hi)
-			break;
-		hi = next_hi;
-	}
-
-pr_crit("%s: read %llx\n", __func__, ((u64) hi << 32) | lo);
-	return ((u64) hi << 32) | lo;
-}
-
-#define TIM_C_SIZE		48		/* # bits in the timer */
-
-static struct clocksource clocksource_tim_c = {
-	.name		= "powertv-tim_c",
-	.read		= tim_c_read,
-	.mask		= CLOCKSOURCE_MASK(TIM_C_SIZE),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-/**
- * powertv_tim_c_clocksource_init - set up a clock source for the TIM_C clock
- *
- * We know that TIM_C counts at 27 MHz/8, so each cycle corresponds to
- * 1 / (27,000,000/8) seconds.
- */
-static void __init powertv_tim_c_clocksource_init(void)
-{
-	const unsigned long	counts_per_second = 27000000 / 8;
-
-	clocksource_tim_c.rating = 200;
-
-	clocksource_register_hz(&clocksource_tim_c, counts_per_second);
-	tim_c = (struct tim_c *) asic_reg_addr(tim_ch);
-}
-
-/**
- powertv_clocksource_init - initialize all clocksources
- */
-void __init powertv_clocksource_init(void)
-{
-	powertv_c0_hpt_clocksource_init();
-	powertv_tim_c_clocksource_init();
-}
diff --git a/arch/mips/kernel/early_printk_8250.c b/arch/mips/kernel/early_printk_8250.c
new file mode 100644
index 0000000..83cea37
--- /dev/null
+++ b/arch/mips/kernel/early_printk_8250.c
@@ -0,0 +1,66 @@
+/*
+ *  8250/16550-type serial ports prom_putchar()
+ *
+ *  Copyright (C) 2010  Yoichi Yuasa <yuasa@linux-mips.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/io.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+
+static void __iomem *serial8250_base;
+static unsigned int serial8250_reg_shift;
+static unsigned int serial8250_tx_timeout;
+
+void setup_8250_early_printk_port(unsigned long base, unsigned int reg_shift,
+				  unsigned int timeout)
+{
+	serial8250_base = (void __iomem *)base;
+	serial8250_reg_shift = reg_shift;
+	serial8250_tx_timeout = timeout;
+}
+
+static inline u8 serial_in(int offset)
+{
+	return readb(serial8250_base + (offset << serial8250_reg_shift));
+}
+
+static inline void serial_out(int offset, char value)
+{
+	writeb(value, serial8250_base + (offset << serial8250_reg_shift));
+}
+
+void prom_putchar(char c)
+{
+	unsigned int timeout;
+	int status, bits;
+
+	if (!serial8250_base)
+		return;
+
+	timeout = serial8250_tx_timeout;
+	bits = UART_LSR_TEMT | UART_LSR_THRE;
+
+	do {
+		status = serial_in(UART_LSR);
+
+		if (--timeout == 0)
+			break;
+	} while ((status & bits) != bits);
+
+	if (timeout)
+		serial_out(UART_TX, c);
+}
diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c
index dba90ec..185ba25 100644
--- a/arch/mips/kernel/ftrace.c
+++ b/arch/mips/kernel/ftrace.c
@@ -11,11 +11,14 @@
 #include <linux/uaccess.h>
 #include <linux/init.h>
 #include <linux/ftrace.h>
+#include <linux/syscalls.h>
 
 #include <asm/asm.h>
 #include <asm/asm-offsets.h>
 #include <asm/cacheflush.h>
+#include <asm/syscall.h>
 #include <asm/uasm.h>
+#include <asm/unistd.h>
 
 #include <asm-generic/sections.h>
 
@@ -364,3 +367,33 @@ out:
 	WARN_ON(1);
 }
 #endif	/* CONFIG_FUNCTION_GRAPH_TRACER */
+
+#ifdef CONFIG_FTRACE_SYSCALLS
+
+#ifdef CONFIG_32BIT
+unsigned long __init arch_syscall_addr(int nr)
+{
+	return (unsigned long)sys_call_table[nr - __NR_O32_Linux];
+}
+#endif
+
+#ifdef CONFIG_64BIT
+
+unsigned long __init arch_syscall_addr(int nr)
+{
+#ifdef CONFIG_MIPS32_N32
+	if (nr >= __NR_N32_Linux && nr <= __NR_N32_Linux + __NR_N32_Linux_syscalls)
+		return (unsigned long)sysn32_call_table[nr - __NR_N32_Linux];
+#endif
+	if (nr >= __NR_64_Linux  && nr <= __NR_64_Linux + __NR_64_Linux_syscalls)
+		return (unsigned long)sys_call_table[nr - __NR_64_Linux];
+#ifdef CONFIG_MIPS32_O32
+	if (nr >= __NR_O32_Linux && nr <= __NR_O32_Linux + __NR_O32_Linux_syscalls)
+		return (unsigned long)sys32_call_table[nr - __NR_O32_Linux];
+#endif
+
+	return (unsigned long) &sys_ni_syscall;
+}
+#endif
+
+#endif /* CONFIG_FTRACE_SYSCALLS */
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index 31fa856..47d7583 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -374,12 +374,20 @@ NESTED(except_vec_nmi, 0, sp)
 NESTED(nmi_handler, PT_SIZE, sp)
 	.set	push
 	.set	noat
+	/*
+	 * Clear ERL - restore segment mapping
+	 * Clear BEV - required for page fault exception handler to work
+	 */
+	mfc0	k0, CP0_STATUS
+	ori     k0, k0, ST0_EXL
+	li	k1, ~(ST0_BEV | ST0_ERL)
+	and     k0, k0, k1
+	mtc0    k0, CP0_STATUS
+	_ehb
 	SAVE_ALL
 	move	a0, sp
 	jal	nmi_exception_handler
-	RESTORE_ALL
-	.set	mips3
-	eret
+	/* nmi_exception_handler never returns */
 	.set	pop
 	END(nmi_handler)
 
diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c
index 0c655de..f7991d9 100644
--- a/arch/mips/kernel/idle.c
+++ b/arch/mips/kernel/idle.c
@@ -18,6 +18,7 @@
 #include <linux/sched.h>
 #include <asm/cpu.h>
 #include <asm/cpu-info.h>
+#include <asm/cpu-type.h>
 #include <asm/idle.h>
 #include <asm/mipsregs.h>
 
@@ -136,7 +137,7 @@ void __init check_wait(void)
 		return;
 	}
 
-	switch (c->cputype) {
+	switch (current_cpu_type()) {
 	case CPU_R3081:
 	case CPU_R3081E:
 		cpu_wait = r3081_wait;
@@ -166,6 +167,7 @@ void __init check_wait(void)
 	case CPU_CAVIUM_OCTEON:
 	case CPU_CAVIUM_OCTEON_PLUS:
 	case CPU_CAVIUM_OCTEON2:
+	case CPU_CAVIUM_OCTEON3:
 	case CPU_JZRISC:
 	case CPU_LOONGSON1:
 	case CPU_XLR:
diff --git a/arch/mips/kernel/irq_cpu.c b/arch/mips/kernel/irq_cpu.c
index 72ef2d2..e498f2b 100644
--- a/arch/mips/kernel/irq_cpu.c
+++ b/arch/mips/kernel/irq_cpu.c
@@ -150,7 +150,7 @@ int __init mips_cpu_intc_init(struct device_node *of_node,
 	domain = irq_domain_add_legacy(of_node, 8, MIPS_CPU_IRQ_BASE, 0,
 				       &mips_cpu_intc_irq_domain_ops, NULL);
 	if (!domain)
-		panic("Failed to add irqdomain for MIPS CPU\n");
+		panic("Failed to add irqdomain for MIPS CPU");
 
 	return 0;
 }
diff --git a/arch/mips/kernel/mcount.S b/arch/mips/kernel/mcount.S
index a03e93c..539b629 100644
--- a/arch/mips/kernel/mcount.S
+++ b/arch/mips/kernel/mcount.S
@@ -83,7 +83,7 @@ _mcount:
 	PTR_S	MCOUNT_RA_ADDRESS_REG, PT_R12(sp)
 #endif
 
-	move	a0, ra		/* arg1: self return address */
+	PTR_SUBU a0, ra, 8	/* arg1: self address */
 	.globl ftrace_call
 ftrace_call:
 	nop	/* a placeholder for the call to a real tracing function */
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index 977a623..2a52568 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -23,6 +23,7 @@
 #include <linux/moduleloader.h>
 #include <linux/elf.h>
 #include <linux/mm.h>
+#include <linux/numa.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
 #include <linux/fs.h>
@@ -46,7 +47,7 @@ static DEFINE_SPINLOCK(dbe_lock);
 void *module_alloc(unsigned long size)
 {
 	return __vmalloc_node_range(size, 1, MODULE_START, MODULE_END,
-				GFP_KERNEL, PAGE_KERNEL, -1,
+				GFP_KERNEL, PAGE_KERNEL, NUMA_NO_NODE,
 				__builtin_return_address(0));
 }
 #endif
diff --git a/arch/mips/kernel/octeon_switch.S b/arch/mips/kernel/octeon_switch.S
index 4204d76..029e002 100644
--- a/arch/mips/kernel/octeon_switch.S
+++ b/arch/mips/kernel/octeon_switch.S
@@ -73,7 +73,7 @@
 3:
 
 #if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
-	PTR_L	t8, __stack_chk_guard
+	PTR_LA	t8, __stack_chk_guard
 	LONG_L	t9, TASK_STACK_CANARY(a1)
 	LONG_S	t9, 0(t8)
 #endif
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index 45f1ffc..24cdf64 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -971,11 +971,11 @@ static const struct mips_perf_event mipsxx74Kcore_cache_map
 [C(LL)] = {
 	[C(OP_READ)] = {
 		[C(RESULT_ACCESS)]	= { 0x1c, CNTR_ODD, P },
-		[C(RESULT_MISS)]	= { 0x1d, CNTR_EVEN | CNTR_ODD, P },
+		[C(RESULT_MISS)]	= { 0x1d, CNTR_EVEN, P },
 	},
 	[C(OP_WRITE)] = {
 		[C(RESULT_ACCESS)]	= { 0x1c, CNTR_ODD, P },
-		[C(RESULT_MISS)]	= { 0x1d, CNTR_EVEN | CNTR_ODD, P },
+		[C(RESULT_MISS)]	= { 0x1d, CNTR_EVEN, P },
 	},
 },
 [C(ITLB)] = {
diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c
index 7e95404..0fa0b69 100644
--- a/arch/mips/kernel/prom.c
+++ b/arch/mips/kernel/prom.c
@@ -58,8 +58,7 @@ void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
 }
 
 #ifdef CONFIG_BLK_DEV_INITRD
-void __init early_init_dt_setup_initrd_arch(unsigned long start,
-					    unsigned long end)
+void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
 {
 	initrd_start = (unsigned long)__va(start);
 	initrd_end = (unsigned long)__va(end);
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index 8ae1ebe..b52e1d2 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -16,16 +16,20 @@
  */
 #include <linux/compiler.h>
 #include <linux/context_tracking.h>
+#include <linux/elf.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
+#include <linux/regset.h>
 #include <linux/smp.h>
 #include <linux/user.h>
 #include <linux/security.h>
+#include <linux/tracehook.h>
 #include <linux/audit.h>
 #include <linux/seccomp.h>
+#include <linux/ftrace.h>
 
 #include <asm/byteorder.h>
 #include <asm/cpu.h>
@@ -35,10 +39,14 @@
 #include <asm/mipsmtregs.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
+#include <asm/syscall.h>
 #include <asm/uaccess.h>
 #include <asm/bootinfo.h>
 #include <asm/reg.h>
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/syscalls.h>
+
 /*
  * Called by kernel/ptrace.c when detaching..
  *
@@ -255,6 +263,133 @@ int ptrace_set_watch_regs(struct task_struct *child,
 	return 0;
 }
 
+/* regset get/set implementations */
+
+static int gpr_get(struct task_struct *target,
+		   const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   void *kbuf, void __user *ubuf)
+{
+	struct pt_regs *regs = task_pt_regs(target);
+
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				   regs, 0, sizeof(*regs));
+}
+
+static int gpr_set(struct task_struct *target,
+		   const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   const void *kbuf, const void __user *ubuf)
+{
+	struct pt_regs newregs;
+	int ret;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &newregs,
+				 0, sizeof(newregs));
+	if (ret)
+		return ret;
+
+	*task_pt_regs(target) = newregs;
+
+	return 0;
+}
+
+static int fpr_get(struct task_struct *target,
+		   const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   void *kbuf, void __user *ubuf)
+{
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				   &target->thread.fpu,
+				   0, sizeof(elf_fpregset_t));
+	/* XXX fcr31  */
+}
+
+static int fpr_set(struct task_struct *target,
+		   const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   const void *kbuf, const void __user *ubuf)
+{
+	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				  &target->thread.fpu,
+				  0, sizeof(elf_fpregset_t));
+	/* XXX fcr31  */
+}
+
+enum mips_regset {
+	REGSET_GPR,
+	REGSET_FPR,
+};
+
+static const struct user_regset mips_regsets[] = {
+	[REGSET_GPR] = {
+		.core_note_type	= NT_PRSTATUS,
+		.n		= ELF_NGREG,
+		.size		= sizeof(unsigned int),
+		.align		= sizeof(unsigned int),
+		.get		= gpr_get,
+		.set		= gpr_set,
+	},
+	[REGSET_FPR] = {
+		.core_note_type	= NT_PRFPREG,
+		.n		= ELF_NFPREG,
+		.size		= sizeof(elf_fpreg_t),
+		.align		= sizeof(elf_fpreg_t),
+		.get		= fpr_get,
+		.set		= fpr_set,
+	},
+};
+
+static const struct user_regset_view user_mips_view = {
+	.name		= "mips",
+	.e_machine	= ELF_ARCH,
+	.ei_osabi	= ELF_OSABI,
+	.regsets	= mips_regsets,
+	.n		= ARRAY_SIZE(mips_regsets),
+};
+
+static const struct user_regset mips64_regsets[] = {
+	[REGSET_GPR] = {
+		.core_note_type	= NT_PRSTATUS,
+		.n		= ELF_NGREG,
+		.size		= sizeof(unsigned long),
+		.align		= sizeof(unsigned long),
+		.get		= gpr_get,
+		.set		= gpr_set,
+	},
+	[REGSET_FPR] = {
+		.core_note_type	= NT_PRFPREG,
+		.n		= ELF_NFPREG,
+		.size		= sizeof(elf_fpreg_t),
+		.align		= sizeof(elf_fpreg_t),
+		.get		= fpr_get,
+		.set		= fpr_set,
+	},
+};
+
+static const struct user_regset_view user_mips64_view = {
+	.name		= "mips",
+	.e_machine	= ELF_ARCH,
+	.ei_osabi	= ELF_OSABI,
+	.regsets	= mips64_regsets,
+	.n		= ARRAY_SIZE(mips_regsets),
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+#ifdef CONFIG_32BIT
+	return &user_mips_view;
+#endif
+
+#ifdef CONFIG_MIPS32_O32
+		if (test_thread_flag(TIF_32BIT_REGS))
+			return &user_mips_view;
+#endif
+
+	return &user_mips64_view;
+}
+
 long arch_ptrace(struct task_struct *child, long request,
 		 unsigned long addr, unsigned long data)
 {
@@ -517,52 +652,27 @@ long arch_ptrace(struct task_struct *child, long request,
 	return ret;
 }
 
-static inline int audit_arch(void)
-{
-	int arch = EM_MIPS;
-#ifdef CONFIG_64BIT
-	arch |=	 __AUDIT_ARCH_64BIT;
-#endif
-#if defined(__LITTLE_ENDIAN)
-	arch |=	 __AUDIT_ARCH_LE;
-#endif
-	return arch;
-}
-
 /*
  * Notification of system call entry/exit
  * - triggered by current->work.syscall_trace
  */
 asmlinkage void syscall_trace_enter(struct pt_regs *regs)
 {
+	long ret = 0;
 	user_exit();
 
 	/* do the secure computing check first */
 	secure_computing_strict(regs->regs[2]);
 
-	if (!(current->ptrace & PT_PTRACED))
-		goto out;
-
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		goto out;
+	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    tracehook_report_syscall_entry(regs))
+		ret = -1;
 
-	/* The 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ?
-				 0x80 : 0));
-
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
+	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
+		trace_sys_enter(regs, regs->regs[2]);
 
-out:
-	audit_syscall_entry(audit_arch(), regs->regs[2],
+	audit_syscall_entry(__syscall_get_arch(),
+			    regs->regs[2],
 			    regs->regs[4], regs->regs[5],
 			    regs->regs[6], regs->regs[7]);
 }
@@ -582,26 +692,11 @@ asmlinkage void syscall_trace_leave(struct pt_regs *regs)
 
 	audit_syscall_exit(regs);
 
-	if (!(current->ptrace & PT_PTRACED))
-		return;
-
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return;
-
-	/* The 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ?
-				 0x80 : 0));
+	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
+		trace_sys_exit(regs, regs->regs[2]);
 
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, 0);
 
 	user_enter();
 }
diff --git a/arch/mips/kernel/r2300_switch.S b/arch/mips/kernel/r2300_switch.S
index 38af83f..20b7b04 100644
--- a/arch/mips/kernel/r2300_switch.S
+++ b/arch/mips/kernel/r2300_switch.S
@@ -67,7 +67,7 @@ LEAF(resume)
 1:
 
 #if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
-	PTR_L	t8, __stack_chk_guard
+	PTR_LA	t8, __stack_chk_guard
 	LONG_L	t9, TASK_STACK_CANARY(a1)
 	LONG_S	t9, 0(t8)
 #endif
diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S
index 921238a..078de5ea 100644
--- a/arch/mips/kernel/r4k_switch.S
+++ b/arch/mips/kernel/r4k_switch.S
@@ -69,7 +69,7 @@
 1:
 
 #if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
-	PTR_L	t8, __stack_chk_guard
+	PTR_LA	t8, __stack_chk_guard
 	LONG_L	t9, TASK_STACK_CANARY(a1)
 	LONG_S	t9, 0(t8)
 #endif
diff --git a/arch/mips/kernel/relocate_kernel.S b/arch/mips/kernel/relocate_kernel.S
index 43d2d78..74bab9d 100644
--- a/arch/mips/kernel/relocate_kernel.S
+++ b/arch/mips/kernel/relocate_kernel.S
@@ -26,6 +26,12 @@ process_entry:
 	PTR_L		s2, (s0)
 	PTR_ADD		s0, s0, SZREG
 
+	/*
+	 * In case of a kdump/crash kernel, the indirection page is not
+	 * populated as the kernel is directly copied to a reserved location
+	 */
+	beqz		s2, done
+
 	/* destination page */
 	and		s3, s2, 0x1
 	beq		s3, zero, 1f
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index e774bb1..e8e541b 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -40,17 +40,58 @@ NESTED(handle_sys, PT_SIZE, sp)
 	sw	t1, PT_EPC(sp)
 	beqz	t0, illegal_syscall
 
-	sll	t0, v0, 3
+	sll	t0, v0, 2
 	la	t1, sys_call_table
 	addu	t1, t0
 	lw	t2, (t1)		# syscall routine
-	lw	t3, 4(t1)		# >= 0 if we need stack arguments
 	beqz	t2, illegal_syscall
 
 	sw	a3, PT_R26(sp)		# save a3 for syscall restarting
-	bgez	t3, stackargs
 
-stack_done:
+	/*
+	 * More than four arguments.  Try to deal with it by copying the
+	 * stack arguments from the user stack to the kernel stack.
+	 * This Sucks (TM).
+	 */
+	lw	t0, PT_R29(sp)		# get old user stack pointer
+
+	/*
+	 * We intentionally keep the kernel stack a little below the top of
+	 * userspace so we don't have to do a slower byte accurate check here.
+	 */
+	lw	t5, TI_ADDR_LIMIT($28)
+	addu	t4, t0, 32
+	and	t5, t4
+	bltz	t5, bad_stack		# -> sp is bad
+
+	/*
+	 * Ok, copy the args from the luser stack to the kernel stack.
+	 * t3 is the precomputed number of instruction bytes needed to
+	 * load or store arguments 6-8.
+	 */
+
+	.set    push
+	.set    noreorder
+	.set	nomacro
+
+1:	lw	t5, 16(t0)		# argument #5 from usp
+4:	lw	t6, 20(t0)		# argument #6 from usp
+3:	lw	t7, 24(t0)		# argument #7 from usp
+2:	lw	t8, 28(t0)		# argument #8 from usp
+
+	sw	t5, 16(sp)		# argument #5 to ksp
+	sw	t6, 20(sp)		# argument #6 to ksp
+	sw	t7, 24(sp)		# argument #7 to ksp
+	sw	t8, 28(sp)		# argument #8 to ksp
+	.set	pop
+
+	.section __ex_table,"a"
+	PTR	1b,bad_stack
+	PTR	2b,bad_stack
+	PTR	3b,bad_stack
+	PTR	4b,bad_stack
+	.previous
+
 	lw	t0, TI_FLAGS($28)	# syscall tracing enabled?
 	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	and	t0, t1
@@ -102,66 +143,6 @@ syscall_trace_entry:
 /* ------------------------------------------------------------------------ */
 
 	/*
-	 * More than four arguments.  Try to deal with it by copying the
-	 * stack arguments from the user stack to the kernel stack.
-	 * This Sucks (TM).
-	 */
-stackargs:
-	lw	t0, PT_R29(sp)		# get old user stack pointer
-
-	/*
-	 * We intentionally keep the kernel stack a little below the top of
-	 * userspace so we don't have to do a slower byte accurate check here.
-	 */
-	lw	t5, TI_ADDR_LIMIT($28)
-	addu	t4, t0, 32
-	and	t5, t4
-	bltz	t5, bad_stack		# -> sp is bad
-
-	/* Ok, copy the args from the luser stack to the kernel stack.
-	 * t3 is the precomputed number of instruction bytes needed to
-	 * load or store arguments 6-8.
-	 */
-
-	la	t1, 5f			# load up to 3 arguments
-	subu	t1, t3
-1:	lw	t5, 16(t0)		# argument #5 from usp
-	.set	push
-	.set	noreorder
-	.set	nomacro
-	jr	t1
-	 addiu	t1, 6f - 5f
-
-2:	lw	t8, 28(t0)		# argument #8 from usp
-3:	lw	t7, 24(t0)		# argument #7 from usp
-4:	lw	t6, 20(t0)		# argument #6 from usp
-5:	jr	t1
-	 sw	t5, 16(sp)		# argument #5 to ksp
-
-#ifdef CONFIG_CPU_MICROMIPS
-	sw	t8, 28(sp)		# argument #8 to ksp
-	nop
-	sw	t7, 24(sp)		# argument #7 to ksp
-	nop
-	sw	t6, 20(sp)		# argument #6 to ksp
-	nop
-#else
-	sw	t8, 28(sp)		# argument #8 to ksp
-	sw	t7, 24(sp)		# argument #7 to ksp
-	sw	t6, 20(sp)		# argument #6 to ksp
-#endif
-6:	j	stack_done		# go back
-	 nop
-	.set	pop
-
-	.section __ex_table,"a"
-	PTR	1b,bad_stack
-	PTR	2b,bad_stack
-	PTR	3b,bad_stack
-	PTR	4b,bad_stack
-	.previous
-
-	/*
 	 * The stackpointer for a call with more than 4 arguments is bad.
 	 * We probably should handle this case a bit more drastic.
 	 */
@@ -187,7 +168,7 @@ illegal_syscall:
 	subu	t0, a0, __NR_O32_Linux	# check syscall number
 	sltiu	v0, t0, __NR_O32_Linux_syscalls + 1
 	beqz	t0, einval		# do not recurse
-	sll	t1, t0, 3
+	sll	t1, t0, 2
 	beqz	v0, einval
 	lw	t2, sys_call_table(t1)		# syscall routine
 
@@ -218,260 +199,248 @@ einval: li	v0, -ENOSYS
 	jr	ra
 	END(sys_syscall)
 
-	.macro	fifty ptr, nargs, from=1, to=50
-	sys	\ptr		\nargs
-	.if	\to-\from
-	fifty	\ptr,\nargs,"(\from+1)",\to
-	.endif
-	.endm
-
-	.macro	mille ptr, nargs, from=1, to=20
-	fifty	\ptr,\nargs
-	.if	\to-\from
-	mille	\ptr,\nargs,"(\from+1)",\to
-	.endif
-	.endm
-
-	.macro	syscalltable
-	sys	sys_syscall		8	/* 4000 */
-	sys	sys_exit		1
-	sys	__sys_fork		0
-	sys	sys_read		3
-	sys	sys_write		3
-	sys	sys_open		3	/* 4005 */
-	sys	sys_close		1
-	sys	sys_waitpid		3
-	sys	sys_creat		2
-	sys	sys_link		2
-	sys	sys_unlink		1	/* 4010 */
-	sys	sys_execve		0
-	sys	sys_chdir		1
-	sys	sys_time		1
-	sys	sys_mknod		3
-	sys	sys_chmod		2	/* 4015 */
-	sys	sys_lchown		3
-	sys	sys_ni_syscall		0
-	sys	sys_ni_syscall		0	/* was sys_stat */
-	sys	sys_lseek		3
-	sys	sys_getpid		0	/* 4020 */
-	sys	sys_mount		5
-	sys	sys_oldumount		1
-	sys	sys_setuid		1
-	sys	sys_getuid		0
-	sys	sys_stime		1	/* 4025 */
-	sys	sys_ptrace		4
-	sys	sys_alarm		1
-	sys	sys_ni_syscall		0	/* was sys_fstat */
-	sys	sys_pause		0
-	sys	sys_utime		2	/* 4030 */
-	sys	sys_ni_syscall		0
-	sys	sys_ni_syscall		0
-	sys	sys_access		2
-	sys	sys_nice		1
-	sys	sys_ni_syscall		0	/* 4035 */
-	sys	sys_sync		0
-	sys	sys_kill		2
-	sys	sys_rename		2
-	sys	sys_mkdir		2
-	sys	sys_rmdir		1	/* 4040 */
-	sys	sys_dup			1
-	sys	sysm_pipe		0
-	sys	sys_times		1
-	sys	sys_ni_syscall		0
-	sys	sys_brk			1	/* 4045 */
-	sys	sys_setgid		1
-	sys	sys_getgid		0
-	sys	sys_ni_syscall		0	/* was signal(2) */
-	sys	sys_geteuid		0
-	sys	sys_getegid		0	/* 4050 */
-	sys	sys_acct		1
-	sys	sys_umount		2
-	sys	sys_ni_syscall		0
-	sys	sys_ioctl		3
-	sys	sys_fcntl		3	/* 4055 */
-	sys	sys_ni_syscall		2
-	sys	sys_setpgid		2
-	sys	sys_ni_syscall		0
-	sys	sys_olduname		1
-	sys	sys_umask		1	/* 4060 */
-	sys	sys_chroot		1
-	sys	sys_ustat		2
-	sys	sys_dup2		2
-	sys	sys_getppid		0
-	sys	sys_getpgrp		0	/* 4065 */
-	sys	sys_setsid		0
-	sys	sys_sigaction		3
-	sys	sys_sgetmask		0
-	sys	sys_ssetmask		1
-	sys	sys_setreuid		2	/* 4070 */
-	sys	sys_setregid		2
-	sys	sys_sigsuspend		0
-	sys	sys_sigpending		1
-	sys	sys_sethostname		2
-	sys	sys_setrlimit		2	/* 4075 */
-	sys	sys_getrlimit		2
-	sys	sys_getrusage		2
-	sys	sys_gettimeofday	2
-	sys	sys_settimeofday	2
-	sys	sys_getgroups		2	/* 4080 */
-	sys	sys_setgroups		2
-	sys	sys_ni_syscall		0	/* old_select */
-	sys	sys_symlink		2
-	sys	sys_ni_syscall		0	/* was sys_lstat */
-	sys	sys_readlink		3	/* 4085 */
-	sys	sys_uselib		1
-	sys	sys_swapon		2
-	sys	sys_reboot		3
-	sys	sys_old_readdir		3
-	sys	sys_mips_mmap		6	/* 4090 */
-	sys	sys_munmap		2
-	sys	sys_truncate		2
-	sys	sys_ftruncate		2
-	sys	sys_fchmod		2
-	sys	sys_fchown		3	/* 4095 */
-	sys	sys_getpriority		2
-	sys	sys_setpriority		3
-	sys	sys_ni_syscall		0
-	sys	sys_statfs		2
-	sys	sys_fstatfs		2	/* 4100 */
-	sys	sys_ni_syscall		0	/* was ioperm(2) */
-	sys	sys_socketcall		2
-	sys	sys_syslog		3
-	sys	sys_setitimer		3
-	sys	sys_getitimer		2	/* 4105 */
-	sys	sys_newstat		2
-	sys	sys_newlstat		2
-	sys	sys_newfstat		2
-	sys	sys_uname		1
-	sys	sys_ni_syscall		0	/* 4110 was iopl(2) */
-	sys	sys_vhangup		0
-	sys	sys_ni_syscall		0	/* was sys_idle() */
-	sys	sys_ni_syscall		0	/* was sys_vm86 */
-	sys	sys_wait4		4
-	sys	sys_swapoff		1	/* 4115 */
-	sys	sys_sysinfo		1
-	sys	sys_ipc			6
-	sys	sys_fsync		1
-	sys	sys_sigreturn		0
-	sys	__sys_clone		6	/* 4120 */
-	sys	sys_setdomainname	2
-	sys	sys_newuname		1
-	sys	sys_ni_syscall		0	/* sys_modify_ldt */
-	sys	sys_adjtimex		1
-	sys	sys_mprotect		3	/* 4125 */
-	sys	sys_sigprocmask		3
-	sys	sys_ni_syscall		0	/* was create_module */
-	sys	sys_init_module		5
-	sys	sys_delete_module	1
-	sys	sys_ni_syscall		0	/* 4130 was get_kernel_syms */
-	sys	sys_quotactl		4
-	sys	sys_getpgid		1
-	sys	sys_fchdir		1
-	sys	sys_bdflush		2
-	sys	sys_sysfs		3	/* 4135 */
-	sys	sys_personality		1
-	sys	sys_ni_syscall		0	/* for afs_syscall */
-	sys	sys_setfsuid		1
-	sys	sys_setfsgid		1
-	sys	sys_llseek		5	/* 4140 */
-	sys	sys_getdents		3
-	sys	sys_select		5
-	sys	sys_flock		2
-	sys	sys_msync		3
-	sys	sys_readv		3	/* 4145 */
-	sys	sys_writev		3
-	sys	sys_cacheflush		3
-	sys	sys_cachectl		3
-	sys	sys_sysmips		4
-	sys	sys_ni_syscall		0	/* 4150 */
-	sys	sys_getsid		1
-	sys	sys_fdatasync		1
-	sys	sys_sysctl		1
-	sys	sys_mlock		2
-	sys	sys_munlock		2	/* 4155 */
-	sys	sys_mlockall		1
-	sys	sys_munlockall		0
-	sys	sys_sched_setparam	2
-	sys	sys_sched_getparam	2
-	sys	sys_sched_setscheduler	3	/* 4160 */
-	sys	sys_sched_getscheduler	1
-	sys	sys_sched_yield		0
-	sys	sys_sched_get_priority_max 1
-	sys	sys_sched_get_priority_min 1
-	sys	sys_sched_rr_get_interval 2	/* 4165 */
-	sys	sys_nanosleep,		2
-	sys	sys_mremap,		5
-	sys	sys_accept		3
-	sys	sys_bind		3
-	sys	sys_connect		3	/* 4170 */
-	sys	sys_getpeername		3
-	sys	sys_getsockname		3
-	sys	sys_getsockopt		5
-	sys	sys_listen		2
-	sys	sys_recv		4	/* 4175 */
-	sys	sys_recvfrom		6
-	sys	sys_recvmsg		3
-	sys	sys_send		4
-	sys	sys_sendmsg		3
-	sys	sys_sendto		6	/* 4180 */
-	sys	sys_setsockopt		5
-	sys	sys_shutdown		2
-	sys	sys_socket		3
-	sys	sys_socketpair		4
-	sys	sys_setresuid		3	/* 4185 */
-	sys	sys_getresuid		3
-	sys	sys_ni_syscall		0	/* was sys_query_module */
-	sys	sys_poll		3
-	sys	sys_ni_syscall		0	/* was nfsservctl */
-	sys	sys_setresgid		3	/* 4190 */
-	sys	sys_getresgid		3
-	sys	sys_prctl		5
-	sys	sys_rt_sigreturn	0
-	sys	sys_rt_sigaction	4
-	sys	sys_rt_sigprocmask	4	/* 4195 */
-	sys	sys_rt_sigpending	2
-	sys	sys_rt_sigtimedwait	4
-	sys	sys_rt_sigqueueinfo	3
-	sys	sys_rt_sigsuspend	0
-	sys	sys_pread64		6	/* 4200 */
-	sys	sys_pwrite64		6
-	sys	sys_chown		3
-	sys	sys_getcwd		2
-	sys	sys_capget		2
-	sys	sys_capset		2	/* 4205 */
-	sys	sys_sigaltstack		0
-	sys	sys_sendfile		4
-	sys	sys_ni_syscall		0
-	sys	sys_ni_syscall		0
-	sys	sys_mips_mmap2		6	/* 4210 */
-	sys	sys_truncate64		4
-	sys	sys_ftruncate64		4
-	sys	sys_stat64		2
-	sys	sys_lstat64		2
-	sys	sys_fstat64		2	/* 4215 */
-	sys	sys_pivot_root		2
-	sys	sys_mincore		3
-	sys	sys_madvise		3
-	sys	sys_getdents64		3
-	sys	sys_fcntl64		3	/* 4220 */
-	sys	sys_ni_syscall		0
-	sys	sys_gettid		0
-	sys	sys_readahead		5
-	sys	sys_setxattr		5
-	sys	sys_lsetxattr		5	/* 4225 */
-	sys	sys_fsetxattr		5
-	sys	sys_getxattr		4
-	sys	sys_lgetxattr		4
-	sys	sys_fgetxattr		4
-	sys	sys_listxattr		3	/* 4230 */
-	sys	sys_llistxattr		3
-	sys	sys_flistxattr		3
-	sys	sys_removexattr		2
-	sys	sys_lremovexattr	2
-	sys	sys_fremovexattr	2	/* 4235 */
-	sys	sys_tkill		2
-	sys	sys_sendfile64		5
-	sys	sys_futex		6
+	.align	2
+	.type	sys_call_table, @object
+EXPORT(sys_call_table)
+	PTR	sys_syscall			/* 4000 */
+	PTR	sys_exit
+	PTR	__sys_fork
+	PTR	sys_read
+	PTR	sys_write
+	PTR	sys_open			/* 4005 */
+	PTR	sys_close
+	PTR	sys_waitpid
+	PTR	sys_creat
+	PTR	sys_link
+	PTR	sys_unlink			/* 4010 */
+	PTR	sys_execve
+	PTR	sys_chdir
+	PTR	sys_time
+	PTR	sys_mknod
+	PTR	sys_chmod			/* 4015 */
+	PTR	sys_lchown
+	PTR	sys_ni_syscall
+	PTR	sys_ni_syscall			/* was sys_stat */
+	PTR	sys_lseek
+	PTR	sys_getpid			/* 4020 */
+	PTR	sys_mount
+	PTR	sys_oldumount
+	PTR	sys_setuid
+	PTR	sys_getuid
+	PTR	sys_stime			/* 4025 */
+	PTR	sys_ptrace
+	PTR	sys_alarm
+	PTR	sys_ni_syscall			/* was sys_fstat */
+	PTR	sys_pause
+	PTR	sys_utime			/* 4030 */
+	PTR	sys_ni_syscall
+	PTR	sys_ni_syscall
+	PTR	sys_access
+	PTR	sys_nice
+	PTR	sys_ni_syscall			/* 4035 */
+	PTR	sys_sync
+	PTR	sys_kill
+	PTR	sys_rename
+	PTR	sys_mkdir
+	PTR	sys_rmdir			/* 4040 */
+	PTR	sys_dup
+	PTR	sysm_pipe
+	PTR	sys_times
+	PTR	sys_ni_syscall
+	PTR	sys_brk				/* 4045 */
+	PTR	sys_setgid
+	PTR	sys_getgid
+	PTR	sys_ni_syscall			/* was signal(2) */
+	PTR	sys_geteuid
+	PTR	sys_getegid			/* 4050 */
+	PTR	sys_acct
+	PTR	sys_umount
+	PTR	sys_ni_syscall
+	PTR	sys_ioctl
+	PTR	sys_fcntl			/* 4055 */
+	PTR	sys_ni_syscall
+	PTR	sys_setpgid
+	PTR	sys_ni_syscall
+	PTR	sys_olduname
+	PTR	sys_umask			/* 4060 */
+	PTR	sys_chroot
+	PTR	sys_ustat
+	PTR	sys_dup2
+	PTR	sys_getppid
+	PTR	sys_getpgrp			/* 4065 */
+	PTR	sys_setsid
+	PTR	sys_sigaction
+	PTR	sys_sgetmask
+	PTR	sys_ssetmask
+	PTR	sys_setreuid			/* 4070 */
+	PTR	sys_setregid
+	PTR	sys_sigsuspend
+	PTR	sys_sigpending
+	PTR	sys_sethostname
+	PTR	sys_setrlimit			/* 4075 */
+	PTR	sys_getrlimit
+	PTR	sys_getrusage
+	PTR	sys_gettimeofday
+	PTR	sys_settimeofday
+	PTR	sys_getgroups			/* 4080 */
+	PTR	sys_setgroups
+	PTR	sys_ni_syscall			/* old_select */
+	PTR	sys_symlink
+	PTR	sys_ni_syscall			/* was sys_lstat */
+	PTR	sys_readlink			/* 4085 */
+	PTR	sys_uselib
+	PTR	sys_swapon
+	PTR	sys_reboot
+	PTR	sys_old_readdir
+	PTR	sys_mips_mmap			/* 4090 */
+	PTR	sys_munmap
+	PTR	sys_truncate
+	PTR	sys_ftruncate
+	PTR	sys_fchmod
+	PTR	sys_fchown			/* 4095 */
+	PTR	sys_getpriority
+	PTR	sys_setpriority
+	PTR	sys_ni_syscall
+	PTR	sys_statfs
+	PTR	sys_fstatfs			/* 4100 */
+	PTR	sys_ni_syscall			/* was ioperm(2) */
+	PTR	sys_socketcall
+	PTR	sys_syslog
+	PTR	sys_setitimer
+	PTR	sys_getitimer			/* 4105 */
+	PTR	sys_newstat
+	PTR	sys_newlstat
+	PTR	sys_newfstat
+	PTR	sys_uname
+	PTR	sys_ni_syscall			/* 4110 was iopl(2) */
+	PTR	sys_vhangup
+	PTR	sys_ni_syscall			/* was sys_idle() */
+	PTR	sys_ni_syscall			/* was sys_vm86 */
+	PTR	sys_wait4
+	PTR	sys_swapoff			/* 4115 */
+	PTR	sys_sysinfo
+	PTR	sys_ipc
+	PTR	sys_fsync
+	PTR	sys_sigreturn
+	PTR	__sys_clone			/* 4120 */
+	PTR	sys_setdomainname
+	PTR	sys_newuname
+	PTR	sys_ni_syscall			/* sys_modify_ldt */
+	PTR	sys_adjtimex
+	PTR	sys_mprotect			/* 4125 */
+	PTR	sys_sigprocmask
+	PTR	sys_ni_syscall			/* was create_module */
+	PTR	sys_init_module
+	PTR	sys_delete_module
+	PTR	sys_ni_syscall			/* 4130 was get_kernel_syms */
+	PTR	sys_quotactl
+	PTR	sys_getpgid
+	PTR	sys_fchdir
+	PTR	sys_bdflush
+	PTR	sys_sysfs			/* 4135 */
+	PTR	sys_personality
+	PTR	sys_ni_syscall			/* for afs_syscall */
+	PTR	sys_setfsuid
+	PTR	sys_setfsgid
+	PTR	sys_llseek			/* 4140 */
+	PTR	sys_getdents
+	PTR	sys_select
+	PTR	sys_flock
+	PTR	sys_msync
+	PTR	sys_readv			/* 4145 */
+	PTR	sys_writev
+	PTR	sys_cacheflush
+	PTR	sys_cachectl
+	PTR	sys_sysmips
+	PTR	sys_ni_syscall			/* 4150 */
+	PTR	sys_getsid
+	PTR	sys_fdatasync
+	PTR	sys_sysctl
+	PTR	sys_mlock
+	PTR	sys_munlock			/* 4155 */
+	PTR	sys_mlockall
+	PTR	sys_munlockall
+	PTR	sys_sched_setparam
+	PTR	sys_sched_getparam
+	PTR	sys_sched_setscheduler		/* 4160 */
+	PTR	sys_sched_getscheduler
+	PTR	sys_sched_yield
+	PTR	sys_sched_get_priority_max
+	PTR	sys_sched_get_priority_min
+	PTR	sys_sched_rr_get_interval	/* 4165 */
+	PTR	sys_nanosleep
+	PTR	sys_mremap
+	PTR	sys_accept
+	PTR	sys_bind
+	PTR	sys_connect			/* 4170 */
+	PTR	sys_getpeername
+	PTR	sys_getsockname
+	PTR	sys_getsockopt
+	PTR	sys_listen
+	PTR	sys_recv			/* 4175 */
+	PTR	sys_recvfrom
+	PTR	sys_recvmsg
+	PTR	sys_send
+	PTR	sys_sendmsg
+	PTR	sys_sendto			/* 4180 */
+	PTR	sys_setsockopt
+	PTR	sys_shutdown
+	PTR	sys_socket
+	PTR	sys_socketpair
+	PTR	sys_setresuid			/* 4185 */
+	PTR	sys_getresuid
+	PTR	sys_ni_syscall			/* was sys_query_module */
+	PTR	sys_poll
+	PTR	sys_ni_syscall			/* was nfsservctl */
+	PTR	sys_setresgid			/* 4190 */
+	PTR	sys_getresgid
+	PTR	sys_prctl
+	PTR	sys_rt_sigreturn
+	PTR	sys_rt_sigaction
+	PTR	sys_rt_sigprocmask		/* 4195 */
+	PTR	sys_rt_sigpending
+	PTR	sys_rt_sigtimedwait
+	PTR	sys_rt_sigqueueinfo
+	PTR	sys_rt_sigsuspend
+	PTR	sys_pread64			/* 4200 */
+	PTR	sys_pwrite64
+	PTR	sys_chown
+	PTR	sys_getcwd
+	PTR	sys_capget
+	PTR	sys_capset			/* 4205 */
+	PTR	sys_sigaltstack
+	PTR	sys_sendfile
+	PTR	sys_ni_syscall
+	PTR	sys_ni_syscall
+	PTR	sys_mips_mmap2			/* 4210 */
+	PTR	sys_truncate64
+	PTR	sys_ftruncate64
+	PTR	sys_stat64
+	PTR	sys_lstat64
+	PTR	sys_fstat64			/* 4215 */
+	PTR	sys_pivot_root
+	PTR	sys_mincore
+	PTR	sys_madvise
+	PTR	sys_getdents64
+	PTR	sys_fcntl64			/* 4220 */
+	PTR	sys_ni_syscall
+	PTR	sys_gettid
+	PTR	sys_readahead
+	PTR	sys_setxattr
+	PTR	sys_lsetxattr			/* 4225 */
+	PTR	sys_fsetxattr
+	PTR	sys_getxattr
+	PTR	sys_lgetxattr
+	PTR	sys_fgetxattr
+	PTR	sys_listxattr			/* 4230 */
+	PTR	sys_llistxattr
+	PTR	sys_flistxattr
+	PTR	sys_removexattr
+	PTR	sys_lremovexattr
+	PTR	sys_fremovexattr		/* 4235 */
+	PTR	sys_tkill
+	PTR	sys_sendfile64
+	PTR	sys_futex
 #ifdef CONFIG_MIPS_MT_FPAFF
 	/*
 	 * For FPU affinity scheduling on MIPS MT processors, we need to
@@ -480,132 +449,117 @@ einval: li	v0, -ENOSYS
 	 * these hooks for the 32-bit kernel - there is no MIPS64 MT processor
 	 * atm.
 	 */
-	sys	mipsmt_sys_sched_setaffinity	3
-	sys	mipsmt_sys_sched_getaffinity	3
+	PTR	mipsmt_sys_sched_setaffinity
+	PTR	mipsmt_sys_sched_getaffinity
 #else
-	sys	sys_sched_setaffinity	3
-	sys	sys_sched_getaffinity	3	/* 4240 */
+	PTR	sys_sched_setaffinity
+	PTR	sys_sched_getaffinity		/* 4240 */
 #endif /* CONFIG_MIPS_MT_FPAFF */
-	sys	sys_io_setup		2
-	sys	sys_io_destroy		1
-	sys	sys_io_getevents	5
-	sys	sys_io_submit		3
-	sys	sys_io_cancel		3	/* 4245 */
-	sys	sys_exit_group		1
-	sys	sys_lookup_dcookie	4
-	sys	sys_epoll_create	1
-	sys	sys_epoll_ctl		4
-	sys	sys_epoll_wait		4	/* 4250 */
-	sys	sys_remap_file_pages	5
-	sys	sys_set_tid_address	1
-	sys	sys_restart_syscall	0
-	sys	sys_fadvise64_64	7
-	sys	sys_statfs64		3	/* 4255 */
-	sys	sys_fstatfs64		2
-	sys	sys_timer_create	3
-	sys	sys_timer_settime	4
-	sys	sys_timer_gettime	2
-	sys	sys_timer_getoverrun	1	/* 4260 */
-	sys	sys_timer_delete	1
-	sys	sys_clock_settime	2
-	sys	sys_clock_gettime	2
-	sys	sys_clock_getres	2
-	sys	sys_clock_nanosleep	4	/* 4265 */
-	sys	sys_tgkill		3
-	sys	sys_utimes		2
-	sys	sys_mbind		4
-	sys	sys_ni_syscall		0	/* sys_get_mempolicy */
-	sys	sys_ni_syscall		0	/* 4270 sys_set_mempolicy */
-	sys	sys_mq_open		4
-	sys	sys_mq_unlink		1
-	sys	sys_mq_timedsend	5
-	sys	sys_mq_timedreceive	5
-	sys	sys_mq_notify		2	/* 4275 */
-	sys	sys_mq_getsetattr	3
-	sys	sys_ni_syscall		0	/* sys_vserver */
-	sys	sys_waitid		5
-	sys	sys_ni_syscall		0	/* available, was setaltroot */
-	sys	sys_add_key		5	/* 4280 */
-	sys	sys_request_key		4
-	sys	sys_keyctl		5
-	sys	sys_set_thread_area	1
-	sys	sys_inotify_init	0
-	sys	sys_inotify_add_watch	3	/* 4285 */
-	sys	sys_inotify_rm_watch	2
-	sys	sys_migrate_pages	4
-	sys	sys_openat		4
-	sys	sys_mkdirat		3
-	sys	sys_mknodat		4	/* 4290 */
-	sys	sys_fchownat		5
-	sys	sys_futimesat		3
-	sys	sys_fstatat64		4
-	sys	sys_unlinkat		3
-	sys	sys_renameat		4	/* 4295 */
-	sys	sys_linkat		5
-	sys	sys_symlinkat		3
-	sys	sys_readlinkat		4
-	sys	sys_fchmodat		3
-	sys	sys_faccessat		3	/* 4300 */
-	sys	sys_pselect6		6
-	sys	sys_ppoll		5
-	sys	sys_unshare		1
-	sys	sys_splice		6
-	sys	sys_sync_file_range	7	/* 4305 */
-	sys	sys_tee			4
-	sys	sys_vmsplice		4
-	sys	sys_move_pages		6
-	sys	sys_set_robust_list	2
-	sys	sys_get_robust_list	3	/* 4310 */
-	sys	sys_kexec_load		4
-	sys	sys_getcpu		3
-	sys	sys_epoll_pwait		6
-	sys	sys_ioprio_set		3
-	sys	sys_ioprio_get		2	/* 4315 */
-	sys	sys_utimensat		4
-	sys	sys_signalfd		3
-	sys	sys_ni_syscall		0	/* was timerfd */
-	sys	sys_eventfd		1
-	sys	sys_fallocate		6	/* 4320 */
-	sys	sys_timerfd_create	2
-	sys	sys_timerfd_gettime	2
-	sys	sys_timerfd_settime	4
-	sys	sys_signalfd4		4
-	sys	sys_eventfd2		2	/* 4325 */
-	sys	sys_epoll_create1	1
-	sys	sys_dup3		3
-	sys	sys_pipe2		2
-	sys	sys_inotify_init1	1
-	sys	sys_preadv		6	/* 4330 */
-	sys	sys_pwritev		6
-	sys	sys_rt_tgsigqueueinfo	4
-	sys	sys_perf_event_open	5
-	sys	sys_accept4		4
-	sys	sys_recvmmsg		5	/* 4335 */
-	sys	sys_fanotify_init	2
-	sys	sys_fanotify_mark	6
-	sys	sys_prlimit64		4
-	sys	sys_name_to_handle_at	5
-	sys	sys_open_by_handle_at	3	/* 4340 */
-	sys	sys_clock_adjtime	2
-	sys	sys_syncfs		1
-	sys	sys_sendmmsg		4
-	sys	sys_setns		2
-	sys	sys_process_vm_readv	6	/* 4345 */
-	sys	sys_process_vm_writev	6
-	sys	sys_kcmp		5
-	sys	sys_finit_module	3
-	.endm
-
-	/* We pre-compute the number of _instruction_ bytes needed to
-	   load or store the arguments 6-8. Negative values are ignored. */
-
-	.macro	sys function, nargs
-	PTR	\function
-	LONG	(\nargs << 2) - (5 << 2)
-	.endm
-
-	.align	3
-	.type	sys_call_table,@object
-EXPORT(sys_call_table)
-	syscalltable
-	.size	sys_call_table, . - sys_call_table
+	PTR	sys_io_setup
+	PTR	sys_io_destroy
+	PTR	sys_io_getevents
+	PTR	sys_io_submit
+	PTR	sys_io_cancel			/* 4245 */
+	PTR	sys_exit_group
+	PTR	sys_lookup_dcookie
+	PTR	sys_epoll_create
+	PTR	sys_epoll_ctl
+	PTR	sys_epoll_wait			/* 4250 */
+	PTR	sys_remap_file_pages
+	PTR	sys_set_tid_address
+	PTR	sys_restart_syscall
+	PTR	sys_fadvise64_64
+	PTR	sys_statfs64			/* 4255 */
+	PTR	sys_fstatfs64
+	PTR	sys_timer_create
+	PTR	sys_timer_settime
+	PTR	sys_timer_gettime
+	PTR	sys_timer_getoverrun		/* 4260 */
+	PTR	sys_timer_delete
+	PTR	sys_clock_settime
+	PTR	sys_clock_gettime
+	PTR	sys_clock_getres
+	PTR	sys_clock_nanosleep		/* 4265 */
+	PTR	sys_tgkill
+	PTR	sys_utimes
+	PTR	sys_mbind
+	PTR	sys_ni_syscall			/* sys_get_mempolicy */
+	PTR	sys_ni_syscall			/* 4270 sys_set_mempolicy */
+	PTR	sys_mq_open
+	PTR	sys_mq_unlink
+	PTR	sys_mq_timedsend
+	PTR	sys_mq_timedreceive
+	PTR	sys_mq_notify			/* 4275 */
+	PTR	sys_mq_getsetattr
+	PTR	sys_ni_syscall			/* sys_vserver */
+	PTR	sys_waitid
+	PTR	sys_ni_syscall			/* available, was setaltroot */
+	PTR	sys_add_key			/* 4280 */
+	PTR	sys_request_key
+	PTR	sys_keyctl
+	PTR	sys_set_thread_area
+	PTR	sys_inotify_init
+	PTR	sys_inotify_add_watch		/* 4285 */
+	PTR	sys_inotify_rm_watch
+	PTR	sys_migrate_pages
+	PTR	sys_openat
+	PTR	sys_mkdirat
+	PTR	sys_mknodat			/* 4290 */
+	PTR	sys_fchownat
+	PTR	sys_futimesat
+	PTR	sys_fstatat64
+	PTR	sys_unlinkat
+	PTR	sys_renameat			/* 4295 */
+	PTR	sys_linkat
+	PTR	sys_symlinkat
+	PTR	sys_readlinkat
+	PTR	sys_fchmodat
+	PTR	sys_faccessat			/* 4300 */
+	PTR	sys_pselect6
+	PTR	sys_ppoll
+	PTR	sys_unshare
+	PTR	sys_splice
+	PTR	sys_sync_file_range		/* 4305 */
+	PTR	sys_tee
+	PTR	sys_vmsplice
+	PTR	sys_move_pages
+	PTR	sys_set_robust_list
+	PTR	sys_get_robust_list		/* 4310 */
+	PTR	sys_kexec_load
+	PTR	sys_getcpu
+	PTR	sys_epoll_pwait
+	PTR	sys_ioprio_set
+	PTR	sys_ioprio_get			/* 4315 */
+	PTR	sys_utimensat
+	PTR	sys_signalfd
+	PTR	sys_ni_syscall			/* was timerfd */
+	PTR	sys_eventfd
+	PTR	sys_fallocate			/* 4320 */
+	PTR	sys_timerfd_create
+	PTR	sys_timerfd_gettime
+	PTR	sys_timerfd_settime
+	PTR	sys_signalfd4
+	PTR	sys_eventfd2			/* 4325 */
+	PTR	sys_epoll_create1
+	PTR	sys_dup3
+	PTR	sys_pipe2
+	PTR	sys_inotify_init1
+	PTR	sys_preadv			/* 4330 */
+	PTR	sys_pwritev
+	PTR	sys_rt_tgsigqueueinfo
+	PTR	sys_perf_event_open
+	PTR	sys_accept4
+	PTR	sys_recvmmsg			/* 4335 */
+	PTR	sys_fanotify_init
+	PTR	sys_fanotify_mark
+	PTR	sys_prlimit64
+	PTR	sys_name_to_handle_at
+	PTR	sys_open_by_handle_at		/* 4340 */
+	PTR	sys_clock_adjtime
+	PTR	sys_syncfs
+	PTR	sys_sendmmsg
+	PTR	sys_setns
+	PTR	sys_process_vm_readv		/* 4345 */
+	PTR	sys_process_vm_writev
+	PTR	sys_kcmp
+	PTR	sys_finit_module
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index be6627e..57e3742 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -114,7 +114,8 @@ illegal_syscall:
 	END(handle_sys64)
 
 	.align	3
-sys_call_table:
+	.type	sys_call_table, @object
+EXPORT(sys_call_table)
 	PTR	sys_read			/* 5000 */
 	PTR	sys_write
 	PTR	sys_open
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index cab1507..2f48f59 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -103,6 +103,7 @@ not_n32_scall:
 
 	END(handle_sysn32)
 
+	.type	sysn32_call_table, @object
 EXPORT(sysn32_call_table)
 	PTR	sys_read			/* 6000 */
 	PTR	sys_write
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 37605dc..f1acdb4 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -53,7 +53,7 @@ NESTED(handle_sys, PT_SIZE, sp)
 	sll	a3, a3, 0
 
 	dsll	t0, v0, 3		# offset into table
-	ld	t2, (sys_call_table - (__NR_O32_Linux * 8))(t0)
+	ld	t2, (sys32_call_table - (__NR_O32_Linux * 8))(t0)
 
 	sd	a3, PT_R26(sp)		# save a3 for syscall restarting
 
@@ -168,7 +168,7 @@ LEAF(sys32_syscall)
 	beqz	t0, einval		# do not recurse
 	dsll	t1, t0, 3
 	beqz	v0, einval
-	ld	t2, sys_call_table(t1)		# syscall routine
+	ld	t2, sys32_call_table(t1)		# syscall routine
 
 	move	a0, a1			# shift argument registers
 	move	a1, a2
@@ -190,8 +190,8 @@ einval: li	v0, -ENOSYS
 	END(sys32_syscall)
 
 	.align	3
-	.type	sys_call_table,@object
-sys_call_table:
+	.type	sys32_call_table,@object
+EXPORT(sys32_call_table)
 	PTR	sys32_syscall			/* 4000 */
 	PTR	sys_exit
 	PTR	__sys_fork
@@ -541,4 +541,4 @@ sys_call_table:
 	PTR	compat_sys_process_vm_writev
 	PTR	sys_kcmp
 	PTR	sys_finit_module
-	.size	sys_call_table,.-sys_call_table
+	.size	sys32_call_table,.-sys32_call_table
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index c7f9051..a842154 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -300,12 +300,13 @@ static void __init bootmem_init(void)
 	int i;
 
 	/*
-	 * Init any data related to initrd. It's a nop if INITRD is
-	 * not selected. Once that done we can determine the low bound
-	 * of usable memory.
+	 * Sanity check any INITRD first. We don't take it into account
+	 * for bootmem setup initially, rely on the end-of-kernel-code
+	 * as our memory range starting point. Once bootmem is inited we
+	 * will reserve the area used for the initrd.
 	 */
-	reserved_end = max(init_initrd(),
-			   (unsigned long) PFN_UP(__pa_symbol(&_end)));
+	init_initrd();
+	reserved_end = (unsigned long) PFN_UP(__pa_symbol(&_end));
 
 	/*
 	 * max_low_pfn is not a number of pages. The number of pages
@@ -362,6 +363,14 @@ static void __init bootmem_init(void)
 		max_low_pfn = PFN_DOWN(HIGHMEM_START);
 	}
 
+#ifdef CONFIG_BLK_DEV_INITRD
+	/*
+	 * mapstart should be after initrd_end
+	 */
+	if (initrd_end)
+		mapstart = max(mapstart, (unsigned long)PFN_UP(__pa(initrd_end)));
+#endif
+
 	/*
 	 * Initialize the boot-time allocator with low memory only.
 	 */
@@ -552,6 +561,52 @@ static void __init arch_mem_addpart(phys_t mem, phys_t end, int type)
 	add_memory_region(mem, size, type);
 }
 
+#ifdef CONFIG_KEXEC
+static inline unsigned long long get_total_mem(void)
+{
+	unsigned long long total;
+
+	total = max_pfn - min_low_pfn;
+	return total << PAGE_SHIFT;
+}
+
+static void __init mips_parse_crashkernel(void)
+{
+	unsigned long long total_mem;
+	unsigned long long crash_size, crash_base;
+	int ret;
+
+	total_mem = get_total_mem();
+	ret = parse_crashkernel(boot_command_line, total_mem,
+				&crash_size, &crash_base);
+	if (ret != 0 || crash_size <= 0)
+		return;
+
+	crashk_res.start = crash_base;
+	crashk_res.end	 = crash_base + crash_size - 1;
+}
+
+static void __init request_crashkernel(struct resource *res)
+{
+	int ret;
+
+	ret = request_resource(res, &crashk_res);
+	if (!ret)
+		pr_info("Reserving %ldMB of memory at %ldMB for crashkernel\n",
+			(unsigned long)((crashk_res.end -
+					 crashk_res.start + 1) >> 20),
+			(unsigned long)(crashk_res.start  >> 20));
+}
+#else /* !defined(CONFIG_KEXEC)		*/
+static void __init mips_parse_crashkernel(void)
+{
+}
+
+static void __init request_crashkernel(struct resource *res)
+{
+}
+#endif /* !defined(CONFIG_KEXEC)  */
+
 static void __init arch_mem_init(char **cmdline_p)
 {
 	extern void plat_mem_setup(void);
@@ -608,6 +663,8 @@ static void __init arch_mem_init(char **cmdline_p)
 				BOOTMEM_DEFAULT);
 	}
 #endif
+
+	mips_parse_crashkernel();
 #ifdef CONFIG_KEXEC
 	if (crashk_res.start != crashk_res.end)
 		reserve_bootmem(crashk_res.start,
@@ -620,52 +677,6 @@ static void __init arch_mem_init(char **cmdline_p)
 	paging_init();
 }
 
-#ifdef CONFIG_KEXEC
-static inline unsigned long long get_total_mem(void)
-{
-	unsigned long long total;
-
-	total = max_pfn - min_low_pfn;
-	return total << PAGE_SHIFT;
-}
-
-static void __init mips_parse_crashkernel(void)
-{
-	unsigned long long total_mem;
-	unsigned long long crash_size, crash_base;
-	int ret;
-
-	total_mem = get_total_mem();
-	ret = parse_crashkernel(boot_command_line, total_mem,
-				&crash_size, &crash_base);
-	if (ret != 0 || crash_size <= 0)
-		return;
-
-	crashk_res.start = crash_base;
-	crashk_res.end	 = crash_base + crash_size - 1;
-}
-
-static void __init request_crashkernel(struct resource *res)
-{
-	int ret;
-
-	ret = request_resource(res, &crashk_res);
-	if (!ret)
-		pr_info("Reserving %ldMB of memory at %ldMB for crashkernel\n",
-			(unsigned long)((crashk_res.end -
-				crashk_res.start + 1) >> 20),
-			(unsigned long)(crashk_res.start  >> 20));
-}
-#else /* !defined(CONFIG_KEXEC)	 */
-static void __init mips_parse_crashkernel(void)
-{
-}
-
-static void __init request_crashkernel(struct resource *res)
-{
-}
-#endif /* !defined(CONFIG_KEXEC)  */
-
 static void __init resource_init(void)
 {
 	int i;
@@ -678,11 +689,6 @@ static void __init resource_init(void)
 	data_resource.start = __pa_symbol(&_etext);
 	data_resource.end = __pa_symbol(&_edata) - 1;
 
-	/*
-	 * Request address space for all standard RAM.
-	 */
-	mips_parse_crashkernel();
-
 	for (i = 0; i < boot_mem_map.nr_map; i++) {
 		struct resource *res;
 		unsigned long start, end;
diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c
index 126da74..2362665 100644
--- a/arch/mips/kernel/smp-bmips.c
+++ b/arch/mips/kernel/smp-bmips.c
@@ -136,10 +136,10 @@ static void bmips_prepare_cpus(unsigned int max_cpus)
 {
 	if (request_irq(IPI0_IRQ, bmips_ipi_interrupt, IRQF_PERCPU,
 			"smp_ipi0", NULL))
-		panic("Can't request IPI0 interrupt\n");
+		panic("Can't request IPI0 interrupt");
 	if (request_irq(IPI1_IRQ, bmips_ipi_interrupt, IRQF_PERCPU,
 			"smp_ipi1", NULL))
-		panic("Can't request IPI1 interrupt\n");
+		panic("Can't request IPI1 interrupt");
 }
 
 /*
diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c
index c2e5d74..5969f1e 100644
--- a/arch/mips/kernel/smp-cmp.c
+++ b/arch/mips/kernel/smp-cmp.c
@@ -99,7 +99,9 @@ static void cmp_init_secondary(void)
 
 	c->core = (read_c0_ebase() >> 1) & 0x1ff;
 #if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
-	c->vpe_id = (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE;
+	if (cpu_has_mipsmt)
+		c->vpe_id = (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) &
+			TCBIND_CURVPE;
 #endif
 #ifdef CONFIG_MIPS_MT_SMTC
 	c->tc_id  = (read_c0_tcbind() & TCBIND_CURTC) >> TCBIND_CURTC_SHIFT;
@@ -177,9 +179,16 @@ void __init cmp_smp_setup(void)
 	}
 
 	if (cpu_has_mipsmt) {
-		unsigned int nvpe, mvpconf0 = read_c0_mvpconf0();
+		unsigned int nvpe = 1;
+#ifdef CONFIG_MIPS_MT_SMP
+		unsigned int mvpconf0 = read_c0_mvpconf0();
+
+		nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
+#elif defined(CONFIG_MIPS_MT_SMTC)
+		unsigned int mvpconf0 = read_c0_mvpconf0();
 
 		nvpe = ((mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
+#endif
 		smp_num_siblings = nvpe;
 	}
 	pr_info("Detected %i available secondary CPU(s)\n", ncpu);
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 5c208ed..0a022ee 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -150,7 +150,6 @@ asmlinkage void start_secondary(void)
 void __irq_entry smp_call_function_interrupt(void)
 {
 	irq_enter();
-	generic_smp_call_function_single_interrupt();
 	generic_smp_call_function_interrupt();
 	irq_exit();
 }
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 9d686bf..dcb8e5d 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -24,6 +24,7 @@
 #include <linux/export.h>
 
 #include <asm/cpu-features.h>
+#include <asm/cpu-type.h>
 #include <asm/div64.h>
 #include <asm/smtc_ipi.h>
 #include <asm/time.h>
@@ -121,6 +122,14 @@ void __init time_init(void)
 {
 	plat_time_init();
 
-	if (!mips_clockevent_init() || !cpu_has_mfc0_count_bug())
+	/*
+	 * The use of the R4k timer as a clock event takes precedence;
+	 * if reading the Count register might interfere with the timer
+	 * interrupt, then we don't use the timer as a clock source.
+	 * We may still use the timer as a clock source though if the
+	 * timer interrupt isn't reliable; the interference doesn't
+	 * matter then, because we don't use the interrupt.
+	 */
+	if (mips_clockevent_init() != 0 || !cpu_has_mfc0_count_bug())
 		init_mips_clocksource();
 }
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index aec3408..f9c8746 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -39,6 +39,7 @@
 #include <asm/break.h>
 #include <asm/cop2.h>
 #include <asm/cpu.h>
+#include <asm/cpu-type.h>
 #include <asm/dsp.h>
 #include <asm/fpu.h>
 #include <asm/fpu_emulator.h>
@@ -329,6 +330,7 @@ void show_regs(struct pt_regs *regs)
 void show_registers(struct pt_regs *regs)
 {
 	const int field = 2 * sizeof(unsigned long);
+	mm_segment_t old_fs = get_fs();
 
 	__show_regs(regs);
 	print_modules();
@@ -343,9 +345,13 @@ void show_registers(struct pt_regs *regs)
 			printk("*HwTLS: %0*lx\n", field, tls);
 	}
 
+	if (!user_mode(regs))
+		/* Necessary for getting the correct stack content */
+		set_fs(KERNEL_DS);
 	show_stacktrace(current, regs);
 	show_code((unsigned int __user *) regs->cp0_epc);
 	printk("\n");
+	set_fs(old_fs);
 }
 
 static int regs_to_trapnr(struct pt_regs *regs)
@@ -365,7 +371,8 @@ void __noreturn die(const char *str, struct pt_regs *regs)
 
 	oops_enter();
 
-	if (notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV) == NOTIFY_STOP)
+	if (notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs),
+		       SIGSEGV) == NOTIFY_STOP)
 		sig = 0;
 
 	console_verbose();
@@ -456,8 +463,8 @@ asmlinkage void do_be(struct pt_regs *regs)
 	printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n",
 	       data ? "Data" : "Instruction",
 	       field, regs->cp0_epc, field, regs->regs[31]);
-	if (notify_die(DIE_OOPS, "bus error", regs, 0, regs_to_trapnr(regs), SIGBUS)
-	    == NOTIFY_STOP)
+	if (notify_die(DIE_OOPS, "bus error", regs, 0, regs_to_trapnr(regs),
+		       SIGBUS) == NOTIFY_STOP)
 		goto out;
 
 	die_if_kernel("Oops", regs);
@@ -622,7 +629,7 @@ static int simulate_rdhwr(struct pt_regs *regs, int rd, int rt)
 		regs->regs[rt] = read_c0_count();
 		return 0;
 	case 3:		/* Count register resolution */
-		switch (current_cpu_data.cputype) {
+		switch (current_cpu_type()) {
 		case CPU_20KC:
 		case CPU_25KF:
 			regs->regs[rt] = 1;
@@ -726,8 +733,8 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 	siginfo_t info = {0};
 
 	prev_state = exception_enter();
-	if (notify_die(DIE_FP, "FP exception", regs, 0, regs_to_trapnr(regs), SIGFPE)
-	    == NOTIFY_STOP)
+	if (notify_die(DIE_FP, "FP exception", regs, 0, regs_to_trapnr(regs),
+		       SIGFPE) == NOTIFY_STOP)
 		goto out;
 	die_if_kernel("FP exception in kernel code", regs);
 
@@ -797,7 +804,8 @@ static void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
 		return;
 #endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */
 
-	if (notify_die(DIE_TRAP, str, regs, code, regs_to_trapnr(regs), SIGTRAP) == NOTIFY_STOP)
+	if (notify_die(DIE_TRAP, str, regs, code, regs_to_trapnr(regs),
+		       SIGTRAP) == NOTIFY_STOP)
 		return;
 
 	/*
@@ -891,12 +899,14 @@ asmlinkage void do_bp(struct pt_regs *regs)
 	 */
 	switch (bcode) {
 	case BRK_KPROBE_BP:
-		if (notify_die(DIE_BREAK, "debug", regs, bcode, regs_to_trapnr(regs), SIGTRAP) == NOTIFY_STOP)
+		if (notify_die(DIE_BREAK, "debug", regs, bcode,
+			       regs_to_trapnr(regs), SIGTRAP) == NOTIFY_STOP)
 			goto out;
 		else
 			break;
 	case BRK_KPROBE_SSTEPBP:
-		if (notify_die(DIE_SSTEPBP, "single_step", regs, bcode, regs_to_trapnr(regs), SIGTRAP) == NOTIFY_STOP)
+		if (notify_die(DIE_SSTEPBP, "single_step", regs, bcode,
+			       regs_to_trapnr(regs), SIGTRAP) == NOTIFY_STOP)
 			goto out;
 		else
 			break;
@@ -960,8 +970,8 @@ asmlinkage void do_ri(struct pt_regs *regs)
 	int status = -1;
 
 	prev_state = exception_enter();
-	if (notify_die(DIE_RI, "RI Fault", regs, 0, regs_to_trapnr(regs), SIGILL)
-	    == NOTIFY_STOP)
+	if (notify_die(DIE_RI, "RI Fault", regs, 0, regs_to_trapnr(regs),
+		       SIGILL) == NOTIFY_STOP)
 		goto out;
 
 	die_if_kernel("Reserved instruction in kernel code", regs);
@@ -1487,10 +1497,14 @@ int register_nmi_notifier(struct notifier_block *nb)
 
 void __noreturn nmi_exception_handler(struct pt_regs *regs)
 {
+	char str[100];
+
 	raw_notifier_call_chain(&nmi_chain, 0, regs);
 	bust_spinlocks(1);
-	printk("NMI taken!!!!\n");
-	die("NMI", regs);
+	snprintf(str, 100, "CPU%d NMI taken, CP0_EPC=%lx\n",
+		 smp_processor_id(), regs->cp0_epc);
+	regs->cp0_epc = read_c0_errorepc();
+	die(str, regs);
 }
 
 #define VECTORSPACING 0x100	/* for EI/VI mode */
@@ -1553,7 +1567,6 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 	unsigned char *b;
 
 	BUG_ON(!cpu_has_veic && !cpu_has_vint);
-	BUG_ON((n < 0) && (n > 9));
 
 	if (addr == NULL) {
 		handler = (unsigned long) do_default_vi;
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 05826d2..3b46f7c 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -179,5 +179,6 @@ SECTIONS
 		*(.options)
 		*(.pdr)
 		*(.reginfo)
+		*(.eh_frame)
 	}
 }
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 1765bab..59b2b3c 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -1335,8 +1335,9 @@ static ssize_t store_kill(struct device *dev, struct device_attribute *attr,
 
 	return len;
 }
+static DEVICE_ATTR(kill, S_IWUSR, NULL, store_kill);
 
-static ssize_t show_ntcs(struct device *cd, struct device_attribute *attr,
+static ssize_t ntcs_show(struct device *cd, struct device_attribute *attr,
 			 char *buf)
 {
 	struct vpe *vpe = get_vpe(tclimit);
@@ -1344,7 +1345,7 @@ static ssize_t show_ntcs(struct device *cd, struct device_attribute *attr,
 	return sprintf(buf, "%d\n", vpe->ntcs);
 }
 
-static ssize_t store_ntcs(struct device *dev, struct device_attribute *attr,
+static ssize_t ntcs_store(struct device *dev, struct device_attribute *attr,
 			  const char *buf, size_t len)
 {
 	struct vpe *vpe = get_vpe(tclimit);
@@ -1365,12 +1366,14 @@ static ssize_t store_ntcs(struct device *dev, struct device_attribute *attr,
 out_einval:
 	return -EINVAL;
 }
+static DEVICE_ATTR_RW(ntcs);
 
-static struct device_attribute vpe_class_attributes[] = {
-	__ATTR(kill, S_IWUSR, NULL, store_kill),
-	__ATTR(ntcs, S_IRUGO | S_IWUSR, show_ntcs, store_ntcs),
-	{}
+static struct attribute *vpe_attrs[] = {
+	&dev_attr_kill.attr,
+	&dev_attr_ntcs.attr,
+	NULL,
 };
+ATTRIBUTE_GROUPS(vpe);
 
 static void vpe_device_release(struct device *cd)
 {
@@ -1381,7 +1384,7 @@ struct class vpe_class = {
 	.name = "vpe",
 	.owner = THIS_MODULE,
 	.dev_release = vpe_device_release,
-	.dev_attrs = vpe_class_attributes,
+	.dev_groups = vpe_groups,
 };
 
 struct device vpe_device;
diff --git a/arch/mips/kvm/kvm_locore.S b/arch/mips/kvm/kvm_locore.S
index dca2aa6..bbace09 100644
--- a/arch/mips/kvm/kvm_locore.S
+++ b/arch/mips/kvm/kvm_locore.S
@@ -1,13 +1,13 @@
 /*
-* This file is subject to the terms and conditions of the GNU General Public
-* License.  See the file "COPYING" in the main directory of this archive
-* for more details.
-*
-* Main entry point for the guest, exception handling.
-*
-* Copyright (C) 2012  MIPS Technologies, Inc.  All rights reserved.
-* Authors: Sanjay Lal <sanjayl@kymasys.com>
-*/
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Main entry point for the guest, exception handling.
+ *
+ * Copyright (C) 2012  MIPS Technologies, Inc.  All rights reserved.
+ * Authors: Sanjay Lal <sanjayl@kymasys.com>
+ */
 
 #include <asm/asm.h>
 #include <asm/asmmacro.h>
@@ -55,195 +55,193 @@
  * a0: run
  * a1: vcpu
  */
+	.set	noreorder
+	.set	noat
 
 FEXPORT(__kvm_mips_vcpu_run)
-    .set    push
-    .set    noreorder
-    .set    noat
-
-    /* k0/k1 not being used in host kernel context */
-	addiu  		k1,sp, -PT_SIZE
-    LONG_S	    $0, PT_R0(k1)
-    LONG_S     	$1, PT_R1(k1)
-    LONG_S     	$2, PT_R2(k1)
-    LONG_S     	$3, PT_R3(k1)
-
-    LONG_S     	$4, PT_R4(k1)
-    LONG_S     	$5, PT_R5(k1)
-    LONG_S     	$6, PT_R6(k1)
-    LONG_S     	$7, PT_R7(k1)
-
-    LONG_S     	$8,  PT_R8(k1)
-    LONG_S     	$9,  PT_R9(k1)
-    LONG_S     	$10, PT_R10(k1)
-    LONG_S     	$11, PT_R11(k1)
-    LONG_S     	$12, PT_R12(k1)
-    LONG_S     	$13, PT_R13(k1)
-    LONG_S     	$14, PT_R14(k1)
-    LONG_S     	$15, PT_R15(k1)
-    LONG_S     	$16, PT_R16(k1)
-    LONG_S     	$17, PT_R17(k1)
-
-    LONG_S     	$18, PT_R18(k1)
-    LONG_S     	$19, PT_R19(k1)
-    LONG_S     	$20, PT_R20(k1)
-    LONG_S     	$21, PT_R21(k1)
-    LONG_S     	$22, PT_R22(k1)
-    LONG_S     	$23, PT_R23(k1)
-    LONG_S     	$24, PT_R24(k1)
-    LONG_S     	$25, PT_R25(k1)
+	/* k0/k1 not being used in host kernel context */
+	INT_ADDIU k1, sp, -PT_SIZE
+	LONG_S	$0, PT_R0(k1)
+	LONG_S	$1, PT_R1(k1)
+	LONG_S	$2, PT_R2(k1)
+	LONG_S	$3, PT_R3(k1)
+
+	LONG_S	$4, PT_R4(k1)
+	LONG_S	$5, PT_R5(k1)
+	LONG_S	$6, PT_R6(k1)
+	LONG_S	$7, PT_R7(k1)
+
+	LONG_S	$8,  PT_R8(k1)
+	LONG_S	$9,  PT_R9(k1)
+	LONG_S	$10, PT_R10(k1)
+	LONG_S	$11, PT_R11(k1)
+	LONG_S	$12, PT_R12(k1)
+	LONG_S	$13, PT_R13(k1)
+	LONG_S	$14, PT_R14(k1)
+	LONG_S	$15, PT_R15(k1)
+	LONG_S	$16, PT_R16(k1)
+	LONG_S	$17, PT_R17(k1)
+
+	LONG_S	$18, PT_R18(k1)
+	LONG_S	$19, PT_R19(k1)
+	LONG_S	$20, PT_R20(k1)
+	LONG_S	$21, PT_R21(k1)
+	LONG_S	$22, PT_R22(k1)
+	LONG_S	$23, PT_R23(k1)
+	LONG_S	$24, PT_R24(k1)
+	LONG_S	$25, PT_R25(k1)
 
 	/* XXXKYMA k0/k1 not saved, not being used if we got here through an ioctl() */
 
-    LONG_S     	$28, PT_R28(k1)
-    LONG_S     	$29, PT_R29(k1)
-    LONG_S     	$30, PT_R30(k1)
-    LONG_S     	$31, PT_R31(k1)
+	LONG_S	$28, PT_R28(k1)
+	LONG_S	$29, PT_R29(k1)
+	LONG_S	$30, PT_R30(k1)
+	LONG_S	$31, PT_R31(k1)
 
-    /* Save hi/lo */
-	mflo		v0
-	LONG_S		v0, PT_LO(k1)
-	mfhi   		v1
-	LONG_S		v1, PT_HI(k1)
+	/* Save hi/lo */
+	mflo	v0
+	LONG_S	v0, PT_LO(k1)
+	mfhi	v1
+	LONG_S	v1, PT_HI(k1)
 
 	/* Save host status */
-	mfc0		v0, CP0_STATUS
-	LONG_S		v0, PT_STATUS(k1)
+	mfc0	v0, CP0_STATUS
+	LONG_S	v0, PT_STATUS(k1)
 
 	/* Save host ASID, shove it into the BVADDR location */
-	mfc0 		v1,CP0_ENTRYHI
-	andi		v1, 0xff
-	LONG_S		v1, PT_HOST_ASID(k1)
+	mfc0	v1, CP0_ENTRYHI
+	andi	v1, 0xff
+	LONG_S	v1, PT_HOST_ASID(k1)
 
-    /* Save DDATA_LO, will be used to store pointer to vcpu */
-    mfc0        v1, CP0_DDATA_LO
-    LONG_S      v1, PT_HOST_USERLOCAL(k1)
+	/* Save DDATA_LO, will be used to store pointer to vcpu */
+	mfc0	v1, CP0_DDATA_LO
+	LONG_S	v1, PT_HOST_USERLOCAL(k1)
 
-    /* DDATA_LO has pointer to vcpu */
-    mtc0        a1,CP0_DDATA_LO
+	/* DDATA_LO has pointer to vcpu */
+	mtc0	a1, CP0_DDATA_LO
 
-    /* Offset into vcpu->arch */
-	addiu		k1, a1, VCPU_HOST_ARCH
+	/* Offset into vcpu->arch */
+	INT_ADDIU k1, a1, VCPU_HOST_ARCH
 
-    /* Save the host stack to VCPU, used for exception processing when we exit from the Guest */
-    LONG_S      sp, VCPU_HOST_STACK(k1)
+	/*
+	 * Save the host stack to VCPU, used for exception processing
+	 * when we exit from the Guest
+	 */
+	LONG_S	sp, VCPU_HOST_STACK(k1)
 
-    /* Save the kernel gp as well */
-    LONG_S      gp, VCPU_HOST_GP(k1)
+	/* Save the kernel gp as well */
+	LONG_S	gp, VCPU_HOST_GP(k1)
 
 	/* Setup status register for running the guest in UM, interrupts are disabled */
-	li			k0,(ST0_EXL | KSU_USER| ST0_BEV)
-	mtc0		k0,CP0_STATUS
-    ehb
-
-    /* load up the new EBASE */
-    LONG_L      k0, VCPU_GUEST_EBASE(k1)
-    mtc0        k0,CP0_EBASE
-
-    /* Now that the new EBASE has been loaded, unset BEV, set interrupt mask as it was
-     * but make sure that timer interrupts are enabled
-     */
-    li          k0,(ST0_EXL | KSU_USER | ST0_IE)
-    andi        v0, v0, ST0_IM
-    or          k0, k0, v0
-    mtc0        k0,CP0_STATUS
-    ehb
+	li	k0, (ST0_EXL | KSU_USER | ST0_BEV)
+	mtc0	k0, CP0_STATUS
+	ehb
+
+	/* load up the new EBASE */
+	LONG_L	k0, VCPU_GUEST_EBASE(k1)
+	mtc0	k0, CP0_EBASE
+
+	/*
+	 * Now that the new EBASE has been loaded, unset BEV, set
+	 * interrupt mask as it was but make sure that timer interrupts
+	 * are enabled
+	 */
+	li	k0, (ST0_EXL | KSU_USER | ST0_IE)
+	andi	v0, v0, ST0_IM
+	or	k0, k0, v0
+	mtc0	k0, CP0_STATUS
+	ehb
 
 
 	/* Set Guest EPC */
-	LONG_L		t0, VCPU_PC(k1)
-	mtc0		t0, CP0_EPC
+	LONG_L	t0, VCPU_PC(k1)
+	mtc0	t0, CP0_EPC
 
 FEXPORT(__kvm_mips_load_asid)
-    /* Set the ASID for the Guest Kernel */
-    sll         t0, t0, 1                       /* with kseg0 @ 0x40000000, kernel */
-                                                /* addresses shift to 0x80000000 */
-    bltz        t0, 1f                          /* If kernel */
-	addiu       t1, k1, VCPU_GUEST_KERNEL_ASID  /* (BD)  */
-    addiu       t1, k1, VCPU_GUEST_USER_ASID    /* else user */
+	/* Set the ASID for the Guest Kernel */
+	INT_SLL	t0, t0, 1	/* with kseg0 @ 0x40000000, kernel */
+			        /* addresses shift to 0x80000000 */
+	bltz	t0, 1f		/* If kernel */
+	 INT_ADDIU t1, k1, VCPU_GUEST_KERNEL_ASID  /* (BD)  */
+	INT_ADDIU t1, k1, VCPU_GUEST_USER_ASID    /* else user */
 1:
-    /* t1: contains the base of the ASID array, need to get the cpu id  */
-    LONG_L      t2, TI_CPU($28)             /* smp_processor_id */
-    sll         t2, t2, 2                   /* x4 */
-    addu        t3, t1, t2
-    LONG_L      k0, (t3)
-    andi        k0, k0, 0xff
-	mtc0		k0,CP0_ENTRYHI
-    ehb
-
-    /* Disable RDHWR access */
-    mtc0    zero,  CP0_HWRENA
-
-    /* Now load up the Guest Context from VCPU */
-    LONG_L     	$1, VCPU_R1(k1)
-    LONG_L     	$2, VCPU_R2(k1)
-    LONG_L     	$3, VCPU_R3(k1)
-
-    LONG_L     	$4, VCPU_R4(k1)
-    LONG_L     	$5, VCPU_R5(k1)
-    LONG_L     	$6, VCPU_R6(k1)
-    LONG_L     	$7, VCPU_R7(k1)
-
-    LONG_L     	$8,  VCPU_R8(k1)
-    LONG_L     	$9,  VCPU_R9(k1)
-    LONG_L     	$10, VCPU_R10(k1)
-    LONG_L     	$11, VCPU_R11(k1)
-    LONG_L     	$12, VCPU_R12(k1)
-    LONG_L     	$13, VCPU_R13(k1)
-    LONG_L     	$14, VCPU_R14(k1)
-    LONG_L     	$15, VCPU_R15(k1)
-    LONG_L     	$16, VCPU_R16(k1)
-    LONG_L     	$17, VCPU_R17(k1)
-    LONG_L     	$18, VCPU_R18(k1)
-    LONG_L     	$19, VCPU_R19(k1)
-    LONG_L     	$20, VCPU_R20(k1)
-    LONG_L     	$21, VCPU_R21(k1)
-    LONG_L     	$22, VCPU_R22(k1)
-    LONG_L     	$23, VCPU_R23(k1)
-    LONG_L     	$24, VCPU_R24(k1)
-    LONG_L     	$25, VCPU_R25(k1)
-
-    /* k0/k1 loaded up later */
-
-    LONG_L     	$28, VCPU_R28(k1)
-    LONG_L     	$29, VCPU_R29(k1)
-    LONG_L     	$30, VCPU_R30(k1)
-    LONG_L     	$31, VCPU_R31(k1)
-
-    /* Restore hi/lo */
-	LONG_L		k0, VCPU_LO(k1)
-	mtlo		k0
-
-	LONG_L		k0, VCPU_HI(k1)
-	mthi   		k0
+	     /* t1: contains the base of the ASID array, need to get the cpu id  */
+	LONG_L	t2, TI_CPU($28)             /* smp_processor_id */
+	INT_SLL	t2, t2, 2                   /* x4 */
+	REG_ADDU t3, t1, t2
+	LONG_L	k0, (t3)
+	andi	k0, k0, 0xff
+	mtc0	k0, CP0_ENTRYHI
+	ehb
+
+	/* Disable RDHWR access */
+	mtc0	zero, CP0_HWRENA
+
+	/* Now load up the Guest Context from VCPU */
+	LONG_L	$1, VCPU_R1(k1)
+	LONG_L	$2, VCPU_R2(k1)
+	LONG_L	$3, VCPU_R3(k1)
+
+	LONG_L	$4, VCPU_R4(k1)
+	LONG_L	$5, VCPU_R5(k1)
+	LONG_L	$6, VCPU_R6(k1)
+	LONG_L	$7, VCPU_R7(k1)
+
+	LONG_L	$8, VCPU_R8(k1)
+	LONG_L	$9, VCPU_R9(k1)
+	LONG_L	$10, VCPU_R10(k1)
+	LONG_L	$11, VCPU_R11(k1)
+	LONG_L	$12, VCPU_R12(k1)
+	LONG_L	$13, VCPU_R13(k1)
+	LONG_L	$14, VCPU_R14(k1)
+	LONG_L	$15, VCPU_R15(k1)
+	LONG_L	$16, VCPU_R16(k1)
+	LONG_L	$17, VCPU_R17(k1)
+	LONG_L	$18, VCPU_R18(k1)
+	LONG_L	$19, VCPU_R19(k1)
+	LONG_L	$20, VCPU_R20(k1)
+	LONG_L	$21, VCPU_R21(k1)
+	LONG_L	$22, VCPU_R22(k1)
+	LONG_L	$23, VCPU_R23(k1)
+	LONG_L	$24, VCPU_R24(k1)
+	LONG_L	$25, VCPU_R25(k1)
+
+	/* k0/k1 loaded up later */
+
+	LONG_L	$28, VCPU_R28(k1)
+	LONG_L	$29, VCPU_R29(k1)
+	LONG_L	$30, VCPU_R30(k1)
+	LONG_L	$31, VCPU_R31(k1)
+
+	/* Restore hi/lo */
+	LONG_L	k0, VCPU_LO(k1)
+	mtlo	k0
+
+	LONG_L	k0, VCPU_HI(k1)
+	mthi	k0
 
 FEXPORT(__kvm_mips_load_k0k1)
 	/* Restore the guest's k0/k1 registers */
-    LONG_L     	k0, VCPU_R26(k1)
-    LONG_L     	k1, VCPU_R27(k1)
+	LONG_L	k0, VCPU_R26(k1)
+	LONG_L	k1, VCPU_R27(k1)
 
-    /* Jump to guest */
+	/* Jump to guest */
 	eret
-	.set	pop
 
 VECTOR(MIPSX(exception), unknown)
 /*
  * Find out what mode we came from and jump to the proper handler.
  */
-    .set    push
-	.set	noat
-    .set    noreorder
-    mtc0    k0, CP0_ERROREPC    #01: Save guest k0
-    ehb                         #02:
-
-    mfc0    k0, CP0_EBASE       #02: Get EBASE
-    srl     k0, k0, 10          #03: Get rid of CPUNum
-    sll     k0, k0, 10          #04
-    LONG_S  k1, 0x3000(k0)      #05: Save k1 @ offset 0x3000
-    addiu   k0, k0, 0x2000      #06: Exception handler is installed @ offset 0x2000
-	j	k0				        #07: jump to the function
-	nop				        	#08: branch delay slot
-	.set	push
+	mtc0	k0, CP0_ERROREPC	#01: Save guest k0
+	ehb				#02:
+
+	mfc0	k0, CP0_EBASE		#02: Get EBASE
+	INT_SRL	k0, k0, 10		#03: Get rid of CPUNum
+	INT_SLL	k0, k0, 10		#04
+	LONG_S	k1, 0x3000(k0)		#05: Save k1 @ offset 0x3000
+	INT_ADDIU k0, k0, 0x2000		#06: Exception handler is installed @ offset 0x2000
+	j	k0			#07: jump to the function
+	 nop				#08: branch delay slot
 VECTOR_END(MIPSX(exceptionEnd))
 .end MIPSX(exception)
 
@@ -253,329 +251,327 @@ VECTOR_END(MIPSX(exceptionEnd))
  *
  */
 NESTED (MIPSX(GuestException), CALLFRAME_SIZ, ra)
-    .set    push
-    .set    noat
-    .set    noreorder
-
-    /* Get the VCPU pointer from DDTATA_LO */
-    mfc0        k1, CP0_DDATA_LO
-	addiu		k1, k1, VCPU_HOST_ARCH
-
-    /* Start saving Guest context to VCPU */
-    LONG_S  $0, VCPU_R0(k1)
-    LONG_S  $1, VCPU_R1(k1)
-    LONG_S  $2, VCPU_R2(k1)
-    LONG_S  $3, VCPU_R3(k1)
-    LONG_S  $4, VCPU_R4(k1)
-    LONG_S  $5, VCPU_R5(k1)
-    LONG_S  $6, VCPU_R6(k1)
-    LONG_S  $7, VCPU_R7(k1)
-    LONG_S  $8, VCPU_R8(k1)
-    LONG_S  $9, VCPU_R9(k1)
-    LONG_S  $10, VCPU_R10(k1)
-    LONG_S  $11, VCPU_R11(k1)
-    LONG_S  $12, VCPU_R12(k1)
-    LONG_S  $13, VCPU_R13(k1)
-    LONG_S  $14, VCPU_R14(k1)
-    LONG_S  $15, VCPU_R15(k1)
-    LONG_S  $16, VCPU_R16(k1)
-    LONG_S  $17,VCPU_R17(k1)
-    LONG_S  $18, VCPU_R18(k1)
-    LONG_S  $19, VCPU_R19(k1)
-    LONG_S  $20, VCPU_R20(k1)
-    LONG_S  $21, VCPU_R21(k1)
-    LONG_S  $22, VCPU_R22(k1)
-    LONG_S  $23, VCPU_R23(k1)
-    LONG_S  $24, VCPU_R24(k1)
-    LONG_S  $25, VCPU_R25(k1)
-
-    /* Guest k0/k1 saved later */
-
-    LONG_S  $28, VCPU_R28(k1)
-    LONG_S  $29, VCPU_R29(k1)
-    LONG_S  $30, VCPU_R30(k1)
-    LONG_S  $31, VCPU_R31(k1)
-
-    /* We need to save hi/lo and restore them on
-     * the way out
-     */
-    mfhi    t0
-    LONG_S  t0, VCPU_HI(k1)
-
-    mflo    t0
-    LONG_S  t0, VCPU_LO(k1)
-
-    /* Finally save guest k0/k1 to VCPU */
-    mfc0    t0, CP0_ERROREPC
-    LONG_S  t0, VCPU_R26(k1)
-
-    /* Get GUEST k1 and save it in VCPU */
-    la      t1, ~0x2ff
-    mfc0    t0, CP0_EBASE
-    and     t0, t0, t1
-    LONG_L  t0, 0x3000(t0)
-    LONG_S  t0, VCPU_R27(k1)
-
-    /* Now that context has been saved, we can use other registers */
-
-    /* Restore vcpu */
-    mfc0        a1, CP0_DDATA_LO
-    move        s1, a1
-
-   /* Restore run (vcpu->run) */
-    LONG_L      a0, VCPU_RUN(a1)
-    /* Save pointer to run in s0, will be saved by the compiler */
-    move        s0, a0
-
-
-    /* Save Host level EPC, BadVaddr and Cause to VCPU, useful to process the exception */
-    mfc0    k0,CP0_EPC
-    LONG_S  k0, VCPU_PC(k1)
-
-    mfc0    k0, CP0_BADVADDR
-    LONG_S  k0, VCPU_HOST_CP0_BADVADDR(k1)
-
-    mfc0    k0, CP0_CAUSE
-    LONG_S  k0, VCPU_HOST_CP0_CAUSE(k1)
-
-    mfc0    k0, CP0_ENTRYHI
-    LONG_S  k0, VCPU_HOST_ENTRYHI(k1)
-
-    /* Now restore the host state just enough to run the handlers */
-
-    /* Swtich EBASE to the one used by Linux */
-    /* load up the host EBASE */
-    mfc0        v0, CP0_STATUS
-
-    .set at
-	or          k0, v0, ST0_BEV
-    .set noat
-
-    mtc0        k0, CP0_STATUS
-    ehb
-
-    LONG_L      k0, VCPU_HOST_EBASE(k1)
-    mtc0        k0,CP0_EBASE
-
-
-    /* Now that the new EBASE has been loaded, unset BEV and KSU_USER */
-    .set at
-	and         v0, v0, ~(ST0_EXL | KSU_USER | ST0_IE)
-    or          v0, v0, ST0_CU0
-    .set noat
-    mtc0        v0, CP0_STATUS
-    ehb
-
-    /* Load up host GP */
-    LONG_L  gp, VCPU_HOST_GP(k1)
-
-    /* Need a stack before we can jump to "C" */
-    LONG_L  sp, VCPU_HOST_STACK(k1)
-
-    /* Saved host state */
-    addiu   sp,sp, -PT_SIZE
+	/* Get the VCPU pointer from DDTATA_LO */
+	mfc0	k1, CP0_DDATA_LO
+	INT_ADDIU k1, k1, VCPU_HOST_ARCH
+
+	/* Start saving Guest context to VCPU */
+	LONG_S	$0, VCPU_R0(k1)
+	LONG_S	$1, VCPU_R1(k1)
+	LONG_S	$2, VCPU_R2(k1)
+	LONG_S	$3, VCPU_R3(k1)
+	LONG_S	$4, VCPU_R4(k1)
+	LONG_S	$5, VCPU_R5(k1)
+	LONG_S	$6, VCPU_R6(k1)
+	LONG_S	$7, VCPU_R7(k1)
+	LONG_S	$8, VCPU_R8(k1)
+	LONG_S	$9, VCPU_R9(k1)
+	LONG_S	$10, VCPU_R10(k1)
+	LONG_S	$11, VCPU_R11(k1)
+	LONG_S	$12, VCPU_R12(k1)
+	LONG_S	$13, VCPU_R13(k1)
+	LONG_S	$14, VCPU_R14(k1)
+	LONG_S	$15, VCPU_R15(k1)
+	LONG_S	$16, VCPU_R16(k1)
+	LONG_S	$17, VCPU_R17(k1)
+	LONG_S	$18, VCPU_R18(k1)
+	LONG_S	$19, VCPU_R19(k1)
+	LONG_S	$20, VCPU_R20(k1)
+	LONG_S	$21, VCPU_R21(k1)
+	LONG_S	$22, VCPU_R22(k1)
+	LONG_S	$23, VCPU_R23(k1)
+	LONG_S	$24, VCPU_R24(k1)
+	LONG_S	$25, VCPU_R25(k1)
+
+	/* Guest k0/k1 saved later */
+
+	LONG_S	$28, VCPU_R28(k1)
+	LONG_S	$29, VCPU_R29(k1)
+	LONG_S	$30, VCPU_R30(k1)
+	LONG_S	$31, VCPU_R31(k1)
+
+	/* We need to save hi/lo and restore them on
+	 * the way out
+	 */
+	mfhi	t0
+	LONG_S	t0, VCPU_HI(k1)
+
+	mflo	t0
+	LONG_S	t0, VCPU_LO(k1)
+
+	/* Finally save guest k0/k1 to VCPU */
+	mfc0	t0, CP0_ERROREPC
+	LONG_S	t0, VCPU_R26(k1)
+
+	/* Get GUEST k1 and save it in VCPU */
+	PTR_LI	t1, ~0x2ff
+	mfc0	t0, CP0_EBASE
+	and	t0, t0, t1
+	LONG_L	t0, 0x3000(t0)
+	LONG_S	t0, VCPU_R27(k1)
+
+	/* Now that context has been saved, we can use other registers */
+
+	/* Restore vcpu */
+	mfc0	a1, CP0_DDATA_LO
+	move	s1, a1
+
+	/* Restore run (vcpu->run) */
+	LONG_L	a0, VCPU_RUN(a1)
+	/* Save pointer to run in s0, will be saved by the compiler */
+	move	s0, a0
+
+	/* Save Host level EPC, BadVaddr and Cause to VCPU, useful to
+	 * process the exception */
+	mfc0	k0,CP0_EPC
+	LONG_S	k0, VCPU_PC(k1)
+
+	mfc0	k0, CP0_BADVADDR
+	LONG_S	k0, VCPU_HOST_CP0_BADVADDR(k1)
+
+	mfc0	k0, CP0_CAUSE
+	LONG_S	k0, VCPU_HOST_CP0_CAUSE(k1)
+
+	mfc0	k0, CP0_ENTRYHI
+	LONG_S	k0, VCPU_HOST_ENTRYHI(k1)
+
+	/* Now restore the host state just enough to run the handlers */
+
+	/* Swtich EBASE to the one used by Linux */
+	/* load up the host EBASE */
+	mfc0	v0, CP0_STATUS
+
+	.set	at
+	or	k0, v0, ST0_BEV
+	.set	noat
+
+	mtc0	k0, CP0_STATUS
+	ehb
+
+	LONG_L	k0, VCPU_HOST_EBASE(k1)
+	mtc0	k0,CP0_EBASE
+
 
-    /* XXXKYMA do we need to load the host ASID, maybe not because the
-     * kernel entries are marked GLOBAL, need to verify
-     */
+	/* Now that the new EBASE has been loaded, unset BEV and KSU_USER */
+	.set	at
+	and	v0, v0, ~(ST0_EXL | KSU_USER | ST0_IE)
+	or	v0, v0, ST0_CU0
+	.set	noat
+	mtc0	v0, CP0_STATUS
+	ehb
+
+	/* Load up host GP */
+	LONG_L	gp, VCPU_HOST_GP(k1)
+
+	/* Need a stack before we can jump to "C" */
+	LONG_L	sp, VCPU_HOST_STACK(k1)
+
+	/* Saved host state */
+	INT_ADDIU sp, sp, -PT_SIZE
 
-    /* Restore host DDATA_LO */
-    LONG_L      k0, PT_HOST_USERLOCAL(sp)
-    mtc0        k0, CP0_DDATA_LO
+	/* XXXKYMA do we need to load the host ASID, maybe not because the
+	 * kernel entries are marked GLOBAL, need to verify
+	 */
 
-    /* Restore RDHWR access */
-    la      k0, 0x2000000F
-    mtc0    k0,  CP0_HWRENA
+	/* Restore host DDATA_LO */
+	LONG_L	k0, PT_HOST_USERLOCAL(sp)
+	mtc0	k0, CP0_DDATA_LO
 
-    /* Jump to handler */
+	/* Restore RDHWR access */
+	PTR_LI	k0, 0x2000000F
+	mtc0	k0, CP0_HWRENA
+
+	/* Jump to handler */
 FEXPORT(__kvm_mips_jump_to_handler)
-    /* XXXKYMA: not sure if this is safe, how large is the stack?? */
-    /* Now jump to the kvm_mips_handle_exit() to see if we can deal with this in the kernel */
-    la          t9,kvm_mips_handle_exit
-    jalr.hb     t9
-    addiu       sp,sp, -CALLFRAME_SIZ           /* BD Slot */
-
-    /* Return from handler Make sure interrupts are disabled */
-    di
-    ehb
-
-    /* XXXKYMA: k0/k1 could have been blown away if we processed an exception
-     * while we were handling the exception from the guest, reload k1
-     */
-    move        k1, s1
-	addiu		k1, k1, VCPU_HOST_ARCH
-
-    /* Check return value, should tell us if we are returning to the host (handle I/O etc)
-     * or resuming the guest
-     */
-    andi        t0, v0, RESUME_HOST
-    bnez        t0, __kvm_mips_return_to_host
-    nop
+	/* XXXKYMA: not sure if this is safe, how large is the stack??
+	 * Now jump to the kvm_mips_handle_exit() to see if we can deal
+	 * with this in the kernel */
+	PTR_LA	t9, kvm_mips_handle_exit
+	jalr.hb	t9
+	 INT_ADDIU sp, sp, -CALLFRAME_SIZ           /* BD Slot */
+
+	/* Return from handler Make sure interrupts are disabled */
+	di
+	ehb
+
+	/* XXXKYMA: k0/k1 could have been blown away if we processed
+	 * an exception while we were handling the exception from the
+	 * guest, reload k1
+	 */
+
+	move	k1, s1
+	INT_ADDIU k1, k1, VCPU_HOST_ARCH
+
+	/* Check return value, should tell us if we are returning to the
+	 * host (handle I/O etc)or resuming the guest
+	 */
+	andi	t0, v0, RESUME_HOST
+	bnez	t0, __kvm_mips_return_to_host
+	 nop
 
 __kvm_mips_return_to_guest:
-    /* Put the saved pointer to vcpu (s1) back into the DDATA_LO Register */
-    mtc0        s1, CP0_DDATA_LO
-
-    /* Load up the Guest EBASE to minimize the window where BEV is set */
-    LONG_L      t0, VCPU_GUEST_EBASE(k1)
-
-    /* Switch EBASE back to the one used by KVM */
-    mfc0        v1, CP0_STATUS
-    .set at
-	or          k0, v1, ST0_BEV
-    .set noat
-    mtc0        k0, CP0_STATUS
-    ehb
-    mtc0        t0,CP0_EBASE
-
-    /* Setup status register for running guest in UM */
-    .set at
-    or     v1, v1, (ST0_EXL | KSU_USER | ST0_IE)
-    and     v1, v1, ~ST0_CU0
-    .set noat
-    mtc0    v1, CP0_STATUS
-    ehb
+	/* Put the saved pointer to vcpu (s1) back into the DDATA_LO Register */
+	mtc0	s1, CP0_DDATA_LO
 
+	/* Load up the Guest EBASE to minimize the window where BEV is set */
+	LONG_L	t0, VCPU_GUEST_EBASE(k1)
+
+	/* Switch EBASE back to the one used by KVM */
+	mfc0	v1, CP0_STATUS
+	.set	at
+	or	k0, v1, ST0_BEV
+	.set	noat
+	mtc0	k0, CP0_STATUS
+	ehb
+	mtc0	t0, CP0_EBASE
+
+	/* Setup status register for running guest in UM */
+	.set	at
+	or	v1, v1, (ST0_EXL | KSU_USER | ST0_IE)
+	and	v1, v1, ~ST0_CU0
+	.set	noat
+	mtc0	v1, CP0_STATUS
+	ehb
 
 	/* Set Guest EPC */
-	LONG_L		t0, VCPU_PC(k1)
-	mtc0		t0, CP0_EPC
-
-    /* Set the ASID for the Guest Kernel */
-    sll         t0, t0, 1                       /* with kseg0 @ 0x40000000, kernel */
-                                                /* addresses shift to 0x80000000 */
-    bltz        t0, 1f                          /* If kernel */
-	addiu       t1, k1, VCPU_GUEST_KERNEL_ASID  /* (BD)  */
-    addiu       t1, k1, VCPU_GUEST_USER_ASID    /* else user */
+	LONG_L	t0, VCPU_PC(k1)
+	mtc0	t0, CP0_EPC
+
+	/* Set the ASID for the Guest Kernel */
+	INT_SLL	t0, t0, 1	/* with kseg0 @ 0x40000000, kernel */
+				/* addresses shift to 0x80000000 */
+	bltz	t0, 1f		/* If kernel */
+	 INT_ADDIU t1, k1, VCPU_GUEST_KERNEL_ASID  /* (BD)  */
+	INT_ADDIU t1, k1, VCPU_GUEST_USER_ASID    /* else user */
 1:
-    /* t1: contains the base of the ASID array, need to get the cpu id  */
-    LONG_L      t2, TI_CPU($28)             /* smp_processor_id */
-    sll         t2, t2, 2                   /* x4 */
-    addu        t3, t1, t2
-    LONG_L      k0, (t3)
-    andi        k0, k0, 0xff
-	mtc0		k0,CP0_ENTRYHI
-    ehb
-
-    /* Disable RDHWR access */
-    mtc0    zero,  CP0_HWRENA
-
-    /* load the guest context from VCPU and return */
-    LONG_L  $0, VCPU_R0(k1)
-    LONG_L  $1, VCPU_R1(k1)
-    LONG_L  $2, VCPU_R2(k1)
-    LONG_L  $3, VCPU_R3(k1)
-    LONG_L  $4, VCPU_R4(k1)
-    LONG_L  $5, VCPU_R5(k1)
-    LONG_L  $6, VCPU_R6(k1)
-    LONG_L  $7, VCPU_R7(k1)
-    LONG_L  $8, VCPU_R8(k1)
-    LONG_L  $9, VCPU_R9(k1)
-    LONG_L  $10, VCPU_R10(k1)
-    LONG_L  $11, VCPU_R11(k1)
-    LONG_L  $12, VCPU_R12(k1)
-    LONG_L  $13, VCPU_R13(k1)
-    LONG_L  $14, VCPU_R14(k1)
-    LONG_L  $15, VCPU_R15(k1)
-    LONG_L  $16, VCPU_R16(k1)
-    LONG_L  $17, VCPU_R17(k1)
-    LONG_L  $18, VCPU_R18(k1)
-    LONG_L  $19, VCPU_R19(k1)
-    LONG_L  $20, VCPU_R20(k1)
-    LONG_L  $21, VCPU_R21(k1)
-    LONG_L  $22, VCPU_R22(k1)
-    LONG_L  $23, VCPU_R23(k1)
-    LONG_L  $24, VCPU_R24(k1)
-    LONG_L  $25, VCPU_R25(k1)
-
-    /* $/k1 loaded later */
-    LONG_L  $28, VCPU_R28(k1)
-    LONG_L  $29, VCPU_R29(k1)
-    LONG_L  $30, VCPU_R30(k1)
-    LONG_L  $31, VCPU_R31(k1)
+	/* t1: contains the base of the ASID array, need to get the cpu id  */
+	LONG_L	t2, TI_CPU($28)		/* smp_processor_id */
+	INT_SLL	t2, t2, 2		/* x4 */
+	REG_ADDU t3, t1, t2
+	LONG_L	k0, (t3)
+	andi	k0, k0, 0xff
+	mtc0	k0,CP0_ENTRYHI
+	ehb
+
+	/* Disable RDHWR access */
+	mtc0    zero,  CP0_HWRENA
+
+	/* load the guest context from VCPU and return */
+	LONG_L	$0, VCPU_R0(k1)
+	LONG_L	$1, VCPU_R1(k1)
+	LONG_L	$2, VCPU_R2(k1)
+	LONG_L	$3, VCPU_R3(k1)
+	LONG_L	$4, VCPU_R4(k1)
+	LONG_L	$5, VCPU_R5(k1)
+	LONG_L	$6, VCPU_R6(k1)
+	LONG_L	$7, VCPU_R7(k1)
+	LONG_L	$8, VCPU_R8(k1)
+	LONG_L	$9, VCPU_R9(k1)
+	LONG_L	$10, VCPU_R10(k1)
+	LONG_L	$11, VCPU_R11(k1)
+	LONG_L	$12, VCPU_R12(k1)
+	LONG_L	$13, VCPU_R13(k1)
+	LONG_L	$14, VCPU_R14(k1)
+	LONG_L	$15, VCPU_R15(k1)
+	LONG_L	$16, VCPU_R16(k1)
+	LONG_L	$17, VCPU_R17(k1)
+	LONG_L	$18, VCPU_R18(k1)
+	LONG_L	$19, VCPU_R19(k1)
+	LONG_L	$20, VCPU_R20(k1)
+	LONG_L	$21, VCPU_R21(k1)
+	LONG_L	$22, VCPU_R22(k1)
+	LONG_L	$23, VCPU_R23(k1)
+	LONG_L	$24, VCPU_R24(k1)
+	LONG_L	$25, VCPU_R25(k1)
+
+	/* $/k1 loaded later */
+	LONG_L	$28, VCPU_R28(k1)
+	LONG_L	$29, VCPU_R29(k1)
+	LONG_L	$30, VCPU_R30(k1)
+	LONG_L	$31, VCPU_R31(k1)
 
 FEXPORT(__kvm_mips_skip_guest_restore)
-    LONG_L  k0, VCPU_HI(k1)
-    mthi    k0
+	LONG_L	k0, VCPU_HI(k1)
+	mthi	k0
 
-    LONG_L  k0, VCPU_LO(k1)
-    mtlo    k0
+	LONG_L	k0, VCPU_LO(k1)
+	mtlo	k0
 
-    LONG_L  k0, VCPU_R26(k1)
-    LONG_L  k1, VCPU_R27(k1)
+	LONG_L	k0, VCPU_R26(k1)
+	LONG_L	k1, VCPU_R27(k1)
 
-    eret
+	eret
 
 __kvm_mips_return_to_host:
-    /* EBASE is already pointing to Linux */
-    LONG_L  k1, VCPU_HOST_STACK(k1)
-	addiu  	k1,k1, -PT_SIZE
-
-    /* Restore host DDATA_LO */
-    LONG_L      k0, PT_HOST_USERLOCAL(k1)
-    mtc0        k0, CP0_DDATA_LO
-
-    /* Restore host ASID */
-    LONG_L      k0, PT_HOST_ASID(sp)
-    andi        k0, 0xff
-    mtc0        k0,CP0_ENTRYHI
-    ehb
-
-    /* Load context saved on the host stack */
-    LONG_L  $0, PT_R0(k1)
-    LONG_L  $1, PT_R1(k1)
-
-    /* r2/v0 is the return code, shift it down by 2 (arithmetic) to recover the err code  */
-    sra     k0, v0, 2
-    move    $2, k0
-
-    LONG_L  $3, PT_R3(k1)
-    LONG_L  $4, PT_R4(k1)
-    LONG_L  $5, PT_R5(k1)
-    LONG_L  $6, PT_R6(k1)
-    LONG_L  $7, PT_R7(k1)
-    LONG_L  $8, PT_R8(k1)
-    LONG_L  $9, PT_R9(k1)
-    LONG_L  $10, PT_R10(k1)
-    LONG_L  $11, PT_R11(k1)
-    LONG_L  $12, PT_R12(k1)
-    LONG_L  $13, PT_R13(k1)
-    LONG_L  $14, PT_R14(k1)
-    LONG_L  $15, PT_R15(k1)
-    LONG_L  $16, PT_R16(k1)
-    LONG_L  $17, PT_R17(k1)
-    LONG_L  $18, PT_R18(k1)
-    LONG_L  $19, PT_R19(k1)
-    LONG_L  $20, PT_R20(k1)
-    LONG_L  $21, PT_R21(k1)
-    LONG_L  $22, PT_R22(k1)
-    LONG_L  $23, PT_R23(k1)
-    LONG_L  $24, PT_R24(k1)
-    LONG_L  $25, PT_R25(k1)
-
-    /* Host k0/k1 were not saved */
-
-    LONG_L  $28, PT_R28(k1)
-    LONG_L  $29, PT_R29(k1)
-    LONG_L  $30, PT_R30(k1)
-
-    LONG_L  k0, PT_HI(k1)
-    mthi    k0
-
-    LONG_L  k0, PT_LO(k1)
-    mtlo    k0
-
-    /* Restore RDHWR access */
-    la      k0, 0x2000000F
-    mtc0    k0,  CP0_HWRENA
-
-
-    /* Restore RA, which is the address we will return to */
-    LONG_L  ra, PT_R31(k1)
-    j       ra
-    nop
-
-    .set    pop
+	/* EBASE is already pointing to Linux */
+	LONG_L	k1, VCPU_HOST_STACK(k1)
+	INT_ADDIU k1,k1, -PT_SIZE
+
+	/* Restore host DDATA_LO */
+	LONG_L	k0, PT_HOST_USERLOCAL(k1)
+	mtc0	k0, CP0_DDATA_LO
+
+	/* Restore host ASID */
+	LONG_L	k0, PT_HOST_ASID(sp)
+	andi	k0, 0xff
+	mtc0	k0,CP0_ENTRYHI
+	ehb
+
+	/* Load context saved on the host stack */
+	LONG_L	$0, PT_R0(k1)
+	LONG_L	$1, PT_R1(k1)
+
+	/* r2/v0 is the return code, shift it down by 2 (arithmetic)
+	 * to recover the err code  */
+	INT_SRA	k0, v0, 2
+	move	$2, k0
+
+	LONG_L	$3, PT_R3(k1)
+	LONG_L	$4, PT_R4(k1)
+	LONG_L	$5, PT_R5(k1)
+	LONG_L	$6, PT_R6(k1)
+	LONG_L	$7, PT_R7(k1)
+	LONG_L	$8, PT_R8(k1)
+	LONG_L	$9, PT_R9(k1)
+	LONG_L	$10, PT_R10(k1)
+	LONG_L	$11, PT_R11(k1)
+	LONG_L	$12, PT_R12(k1)
+	LONG_L	$13, PT_R13(k1)
+	LONG_L	$14, PT_R14(k1)
+	LONG_L	$15, PT_R15(k1)
+	LONG_L	$16, PT_R16(k1)
+	LONG_L	$17, PT_R17(k1)
+	LONG_L	$18, PT_R18(k1)
+	LONG_L	$19, PT_R19(k1)
+	LONG_L	$20, PT_R20(k1)
+	LONG_L	$21, PT_R21(k1)
+	LONG_L	$22, PT_R22(k1)
+	LONG_L	$23, PT_R23(k1)
+	LONG_L	$24, PT_R24(k1)
+	LONG_L	$25, PT_R25(k1)
+
+	/* Host k0/k1 were not saved */
+
+	LONG_L	$28, PT_R28(k1)
+	LONG_L	$29, PT_R29(k1)
+	LONG_L	$30, PT_R30(k1)
+
+	LONG_L	k0, PT_HI(k1)
+	mthi	k0
+
+	LONG_L	k0, PT_LO(k1)
+	mtlo	k0
+
+	/* Restore RDHWR access */
+	PTR_LI	k0, 0x2000000F
+	mtc0	k0,  CP0_HWRENA
+
+
+	/* Restore RA, which is the address we will return to */
+	LONG_L  ra, PT_R31(k1)
+	j       ra
+	 nop
+
 VECTOR_END(MIPSX(GuestExceptionEnd))
 .end MIPSX(GuestException)
 
@@ -627,24 +623,23 @@ MIPSX(exceptions):
 
 #define HW_SYNCI_Step       $1
 LEAF(MIPSX(SyncICache))
-    .set    push
+	.set	push
 	.set	mips32r2
-    beq     a1, zero, 20f
-    nop
-    addu    a1, a0, a1
-    rdhwr   v0, HW_SYNCI_Step
-    beq     v0, zero, 20f
-    nop
-
+	beq	a1, zero, 20f
+	 nop
+	REG_ADDU a1, a0, a1
+	rdhwr	v0, HW_SYNCI_Step
+	beq	v0, zero, 20f
+	 nop
 10:
-    synci   0(a0)
-    addu    a0, a0, v0
-    sltu    v1, a0, a1
-    bne     v1, zero, 10b
-    nop
-    sync
+	synci	0(a0)
+	REG_ADDU a0, a0, v0
+	sltu	v1, a0, a1
+	bne	v1, zero, 10b
+	 nop
+	sync
 20:
-    jr.hb   ra
-    nop
-    .set pop
+	jr.hb	ra
+	 nop
+	.set	pop
 END(MIPSX(SyncICache))
diff --git a/arch/mips/kvm/kvm_mips.c b/arch/mips/kvm/kvm_mips.c
index dd203e5..a7b0445 100644
--- a/arch/mips/kvm/kvm_mips.c
+++ b/arch/mips/kvm/kvm_mips.c
@@ -208,6 +208,10 @@ int kvm_arch_create_memslot(struct kvm_memory_slot *slot, unsigned long npages)
 	return 0;
 }
 
+void kvm_arch_memslots_updated(struct kvm *kvm)
+{
+}
+
 int kvm_arch_prepare_memory_region(struct kvm *kvm,
                                 struct kvm_memory_slot *memslot,
                                 struct kvm_userspace_memory_region *mem,
diff --git a/arch/mips/lantiq/falcon/sysctrl.c b/arch/mips/lantiq/falcon/sysctrl.c
index ff4894a..8f1866d 100644
--- a/arch/mips/lantiq/falcon/sysctrl.c
+++ b/arch/mips/lantiq/falcon/sysctrl.c
@@ -48,6 +48,7 @@
 #define CPU0CC_CPUDIV		0x0001
 
 /* Activation Status Register */
+#define ACTS_ASC0_ACT	0x00001000
 #define ACTS_ASC1_ACT	0x00000800
 #define ACTS_I2C_ACT	0x00004000
 #define ACTS_P0		0x00010000
@@ -108,6 +109,7 @@ static void sysctl_deactivate(struct clk *clk)
 static int sysctl_clken(struct clk *clk)
 {
 	sysctl_w32(clk->module, clk->bits, SYSCTL_CLKEN);
+	sysctl_w32(clk->module, clk->bits, SYSCTL_ACT);
 	sysctl_wait(clk, clk->bits, SYSCTL_CLKS);
 	return 0;
 }
@@ -256,6 +258,7 @@ void __init ltq_soc_init(void)
 	clkdev_add_sys("1e800400.pad", SYSCTL_SYS1, ACTS_PADCTRL1);
 	clkdev_add_sys("1e800500.pad", SYSCTL_SYS1, ACTS_PADCTRL3);
 	clkdev_add_sys("1e800600.pad", SYSCTL_SYS1, ACTS_PADCTRL4);
-	clkdev_add_sys("1e100C00.serial", SYSCTL_SYS1, ACTS_ASC1_ACT);
+	clkdev_add_sys("1e100b00.serial", SYSCTL_SYS1, ACTS_ASC1_ACT);
+	clkdev_add_sys("1e100c00.serial", SYSCTL_SYS1, ACTS_ASC0_ACT);
 	clkdev_add_sys("1e200000.i2c", SYSCTL_SYS1, ACTS_I2C_ACT);
 }
diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
index eb3e186..85685e1 100644
--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
@@ -390,7 +390,7 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
 		ret = of_irq_to_resource_table(eiu_node,
 						ltq_eiu_irq, exin_avail);
 		if (ret != exin_avail)
-			panic("failed to load external irq resources\n");
+			panic("failed to load external irq resources");
 
 		if (request_mem_region(res.start, resource_size(&res),
 							res.name) < 0)
diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
index 7a13660..087497d 100644
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
@@ -1,3 +1,3 @@
-obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o
+obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
 
 obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
diff --git a/arch/mips/lantiq/xway/dcdc.c b/arch/mips/lantiq/xway/dcdc.c
new file mode 100644
index 0000000..7688ac0
--- /dev/null
+++ b/arch/mips/lantiq/xway/dcdc.c
@@ -0,0 +1,63 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ *  Copyright (C) 2010 Sameer Ahmad, Lantiq GmbH
+ */
+
+#include <linux/ioport.h>
+#include <linux/of_platform.h>
+
+#include <lantiq_soc.h>
+
+/* Bias and regulator Setup Register */
+#define DCDC_BIAS_VREG0	0xa
+/* Bias and regulator Setup Register */
+#define DCDC_BIAS_VREG1	0xb
+
+#define dcdc_w8(x, y)	ltq_w8((x), dcdc_membase + (y))
+#define dcdc_r8(x)	ltq_r8(dcdc_membase + (x))
+
+static void __iomem *dcdc_membase;
+
+static int dcdc_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	dcdc_membase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(dcdc_membase))
+		return PTR_ERR(dcdc_membase);
+
+	dev_info(&pdev->dev, "Core Voltage : %d mV\n",
+		dcdc_r8(DCDC_BIAS_VREG1) * 8);
+
+	return 0;
+}
+
+static const struct of_device_id dcdc_match[] = {
+	{ .compatible = "lantiq,dcdc-xrx200" },
+	{},
+};
+
+static struct platform_driver dcdc_driver = {
+	.probe = dcdc_probe,
+	.driver = {
+		.name = "dcdc-xrx200",
+		.owner = THIS_MODULE,
+		.of_match_table = dcdc_match,
+	},
+};
+
+int __init dcdc_init(void)
+{
+	int ret = platform_driver_register(&dcdc_driver);
+
+	if (ret)
+		pr_info("dcdc: Error registering platform driver\n");
+	return ret;
+}
+
+arch_initcall(dcdc_init);
diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
index c24924f..51804b1 100644
--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -128,7 +128,7 @@ static int pmu_enable(struct clk *clk)
 	do {} while (--retry && (pmu_r32(PWDSR(clk->module)) & clk->bits));
 
 	if (!retry)
-		panic("activating PMU module failed!\n");
+		panic("activating PMU module failed!");
 
 	return 0;
 }
diff --git a/arch/mips/lasat/image/Makefile b/arch/mips/lasat/image/Makefile
index dfb509d..fd32075 100644
--- a/arch/mips/lasat/image/Makefile
+++ b/arch/mips/lasat/image/Makefile
@@ -13,13 +13,11 @@ endif
 MKLASATIMG = mklasatimg
 MKLASATIMG_ARCH = mq2,mqpro,sp100,sp200
 KERNEL_IMAGE = vmlinux
-KERNEL_START = $(shell $(NM) $(KERNEL_IMAGE) | grep " _text" | cut -f1 -d\ )
-KERNEL_ENTRY = $(shell $(NM) $(KERNEL_IMAGE) | grep kernel_entry | cut -f1 -d\ )
 
 LDSCRIPT= -L$(srctree)/$(src) -Tromscript.normal
 
-HEAD_DEFINES := -D_kernel_start=0x$(KERNEL_START) \
-		-D_kernel_entry=0x$(KERNEL_ENTRY) \
+HEAD_DEFINES := -D_kernel_start=$(VMLINUX_LOAD_ADDRESS) \
+		-D_kernel_entry=$(VMLINUX_ENTRY_ADDRESS) \
 		-D VERSION="\"$(Version)\"" \
 		-D TIMESTAMP=$(shell date +%s)
 
diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile
index 4c57b3e..9e4484c 100644
--- a/arch/mips/loongson/common/Makefile
+++ b/arch/mips/loongson/common/Makefile
@@ -3,8 +3,9 @@
 #
 
 obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \
-    pci.o bonito-irq.o mem.o machtype.o platform.o
+    bonito-irq.o mem.o machtype.o platform.o
 obj-$(CONFIG_GPIOLIB) += gpio.o
+obj-$(CONFIG_PCI) += pci.o
 
 #
 # Serial port support
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index 46048d2..efe0088 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -436,7 +436,6 @@ static int microMIPS32_to_MIPS32(union mips_instruction *insn_ptr)
 				break;
 			default:
 				return SIGILL;
-				break;
 			}
 			break;
 		case mm_32f_74_op:	/* c.cond.fmt */
@@ -451,12 +450,10 @@ static int microMIPS32_to_MIPS32(union mips_instruction *insn_ptr)
 			break;
 		default:
 			return SIGILL;
-			break;
 		}
 		break;
 	default:
 		return SIGILL;
-		break;
 	}
 
 	*insn_ptr = mips32_insn;
@@ -491,7 +488,6 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 						dec_insn.next_pc_inc;
 				*contpc = regs->regs[insn.mm_i_format.rs];
 				return 1;
-				break;
 			}
 		}
 		break;
@@ -513,7 +509,6 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 					dec_insn.pc_inc +
 					dec_insn.next_pc_inc;
 			return 1;
-			break;
 		case mm_bgezals_op:
 		case mm_bgezal_op:
 			regs->regs[31] = regs->cp0_epc +
@@ -530,7 +525,6 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 					dec_insn.pc_inc +
 					dec_insn.next_pc_inc;
 			return 1;
-			break;
 		case mm_blez_op:
 			if ((long)regs->regs[insn.mm_i_format.rs] <= 0)
 				*contpc = regs->cp0_epc +
@@ -541,7 +535,6 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 					dec_insn.pc_inc +
 					dec_insn.next_pc_inc;
 			return 1;
-			break;
 		case mm_bgtz_op:
 			if ((long)regs->regs[insn.mm_i_format.rs] <= 0)
 				*contpc = regs->cp0_epc +
@@ -552,7 +545,6 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 					dec_insn.pc_inc +
 					dec_insn.next_pc_inc;
 			return 1;
-			break;
 		case mm_bc2f_op:
 		case mm_bc1f_op:
 			bc_false = 1;
@@ -580,7 +572,6 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 				*contpc = regs->cp0_epc +
 					dec_insn.pc_inc + dec_insn.next_pc_inc;
 			return 1;
-			break;
 		}
 		break;
 	case mm_pool16c_op:
@@ -593,7 +584,6 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 		case mm_jr16_op:
 			*contpc = regs->regs[insn.mm_i_format.rs];
 			return 1;
-			break;
 		}
 		break;
 	case mm_beqz16_op:
@@ -605,7 +595,6 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 			*contpc = regs->cp0_epc +
 				dec_insn.pc_inc + dec_insn.next_pc_inc;
 		return 1;
-		break;
 	case mm_bnez16_op:
 		if ((long)regs->regs[reg16to32map[insn.mm_b1_format.rs]] != 0)
 			*contpc = regs->cp0_epc +
@@ -615,12 +604,10 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 			*contpc = regs->cp0_epc +
 				dec_insn.pc_inc + dec_insn.next_pc_inc;
 		return 1;
-		break;
 	case mm_b16_op:
 		*contpc = regs->cp0_epc + dec_insn.pc_inc +
 			 (insn.mm_b0_format.simmediate << 1);
 		return 1;
-		break;
 	case mm_beq32_op:
 		if (regs->regs[insn.mm_i_format.rs] ==
 		    regs->regs[insn.mm_i_format.rt])
@@ -632,7 +619,6 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 				dec_insn.pc_inc +
 				dec_insn.next_pc_inc;
 		return 1;
-		break;
 	case mm_bne32_op:
 		if (regs->regs[insn.mm_i_format.rs] !=
 		    regs->regs[insn.mm_i_format.rt])
@@ -643,7 +629,6 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 			*contpc = regs->cp0_epc +
 				dec_insn.pc_inc + dec_insn.next_pc_inc;
 		return 1;
-		break;
 	case mm_jalx32_op:
 		regs->regs[31] = regs->cp0_epc +
 			dec_insn.pc_inc + dec_insn.next_pc_inc;
@@ -652,7 +637,6 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 		*contpc <<= 28;
 		*contpc |= (insn.j_format.target << 2);
 		return 1;
-		break;
 	case mm_jals32_op:
 	case mm_jal32_op:
 		regs->regs[31] = regs->cp0_epc +
@@ -665,7 +649,6 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 		*contpc |= (insn.j_format.target << 1);
 		set_isa16_mode(*contpc);
 		return 1;
-		break;
 	}
 	return 0;
 }
@@ -694,7 +677,6 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 		case jr_op:
 			*contpc = regs->regs[insn.r_format.rs];
 			return 1;
-			break;
 		}
 		break;
 	case bcond_op:
@@ -716,7 +698,6 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 					dec_insn.pc_inc +
 					dec_insn.next_pc_inc;
 			return 1;
-			break;
 		case bgezal_op:
 		case bgezall_op:
 			regs->regs[31] = regs->cp0_epc +
@@ -734,7 +715,6 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 					dec_insn.pc_inc +
 					dec_insn.next_pc_inc;
 			return 1;
-			break;
 		}
 		break;
 	case jalx_op:
@@ -752,7 +732,6 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 		/* Set microMIPS mode bit: XOR for jalx. */
 		*contpc ^= bit;
 		return 1;
-		break;
 	case beq_op:
 	case beql_op:
 		if (regs->regs[insn.i_format.rs] ==
@@ -765,7 +744,6 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 				dec_insn.pc_inc +
 				dec_insn.next_pc_inc;
 		return 1;
-		break;
 	case bne_op:
 	case bnel_op:
 		if (regs->regs[insn.i_format.rs] !=
@@ -778,7 +756,6 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 				dec_insn.pc_inc +
 				dec_insn.next_pc_inc;
 		return 1;
-		break;
 	case blez_op:
 	case blezl_op:
 		if ((long)regs->regs[insn.i_format.rs] <= 0)
@@ -790,7 +767,6 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 				dec_insn.pc_inc +
 				dec_insn.next_pc_inc;
 		return 1;
-		break;
 	case bgtz_op:
 	case bgtzl_op:
 		if ((long)regs->regs[insn.i_format.rs] > 0)
@@ -802,7 +778,6 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 				dec_insn.pc_inc +
 				dec_insn.next_pc_inc;
 		return 1;
-		break;
 #ifdef CONFIG_CPU_CAVIUM_OCTEON
 	case lwc2_op: /* This is bbit0 on Octeon */
 		if ((regs->regs[insn.i_format.rs] & (1ull<<insn.i_format.rt)) == 0)
@@ -856,7 +831,6 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 						dec_insn.pc_inc +
 						dec_insn.next_pc_inc;
 				return 1;
-				break;
 			case 1:	/* bc1t */
 			case 3:	/* bc1tl */
 				if (fcr31 & (1 << bit))
@@ -868,7 +842,6 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 						dec_insn.pc_inc +
 						dec_insn.next_pc_inc;
 				return 1;
-				break;
 			}
 		}
 		break;
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index a0bcdbb..c8efdb5 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -19,6 +19,7 @@
 #include <asm/bootinfo.h>
 #include <asm/cacheops.h>
 #include <asm/cpu-features.h>
+#include <asm/cpu-type.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/r4kcache.h>
@@ -186,9 +187,10 @@ static void probe_octeon(void)
 	unsigned long dcache_size;
 	unsigned int config1;
 	struct cpuinfo_mips *c = &current_cpu_data;
+	int cputype = current_cpu_type();
 
 	config1 = read_c0_config1();
-	switch (c->cputype) {
+	switch (cputype) {
 	case CPU_CAVIUM_OCTEON:
 	case CPU_CAVIUM_OCTEON_PLUS:
 		c->icache.linesz = 2 << ((config1 >> 19) & 7);
@@ -199,7 +201,7 @@ static void probe_octeon(void)
 			c->icache.sets * c->icache.ways * c->icache.linesz;
 		c->icache.waybit = ffs(icache_size / c->icache.ways) - 1;
 		c->dcache.linesz = 128;
-		if (c->cputype == CPU_CAVIUM_OCTEON_PLUS)
+		if (cputype == CPU_CAVIUM_OCTEON_PLUS)
 			c->dcache.sets = 2; /* CN5XXX has two Dcache sets */
 		else
 			c->dcache.sets = 1; /* CN3XXX has one Dcache set */
@@ -224,6 +226,20 @@ static void probe_octeon(void)
 		c->options |= MIPS_CPU_PREFETCH;
 		break;
 
+	case CPU_CAVIUM_OCTEON3:
+		c->icache.linesz = 128;
+		c->icache.sets = 16;
+		c->icache.ways = 39;
+		c->icache.flags |= MIPS_CACHE_VTAG;
+		icache_size = c->icache.sets * c->icache.ways * c->icache.linesz;
+
+		c->dcache.linesz = 128;
+		c->dcache.ways = 32;
+		c->dcache.sets = 8;
+		dcache_size = c->dcache.sets * c->dcache.ways * c->dcache.linesz;
+		c->options |= MIPS_CPU_PREFETCH;
+		break;
+
 	default:
 		panic("Unsupported Cavium Networks CPU type");
 		break;
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index f749f68..62ffd20 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -12,6 +12,7 @@
 #include <linux/highmem.h>
 #include <linux/kernel.h>
 #include <linux/linkage.h>
+#include <linux/preempt.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/mm.h>
@@ -24,6 +25,7 @@
 #include <asm/cacheops.h>
 #include <asm/cpu.h>
 #include <asm/cpu-features.h>
+#include <asm/cpu-type.h>
 #include <asm/io.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
@@ -344,14 +346,8 @@ static void r4k_blast_scache_setup(void)
 
 static inline void local_r4k___flush_cache_all(void * args)
 {
-#if defined(CONFIG_CPU_LOONGSON2)
-	r4k_blast_scache();
-	return;
-#endif
-	r4k_blast_dcache();
-	r4k_blast_icache();
-
 	switch (current_cpu_type()) {
+	case CPU_LOONGSON2:
 	case CPU_R4000SC:
 	case CPU_R4000MC:
 	case CPU_R4400SC:
@@ -359,7 +355,18 @@ static inline void local_r4k___flush_cache_all(void * args)
 	case CPU_R10000:
 	case CPU_R12000:
 	case CPU_R14000:
+		/*
+		 * These caches are inclusive caches, that is, if something
+		 * is not cached in the S-cache, we know it also won't be
+		 * in one of the primary caches.
+		 */
 		r4k_blast_scache();
+		break;
+
+	default:
+		r4k_blast_dcache();
+		r4k_blast_icache();
+		break;
 	}
 }
 
@@ -570,8 +577,17 @@ static inline void local_r4k_flush_icache_range(unsigned long start, unsigned lo
 
 	if (end - start > icache_size)
 		r4k_blast_icache();
-	else
-		protected_blast_icache_range(start, end);
+	else {
+		switch (boot_cpu_type()) {
+		case CPU_LOONGSON2:
+			protected_blast_icache_range(start, end);
+			break;
+
+		default:
+			protected_loongson23_blast_icache_range(start, end);
+			break;
+		}
+	}
 }
 
 static inline void local_r4k_flush_icache_range_ipi(void *args)
@@ -601,11 +617,13 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 	/* Catch bad driver code */
 	BUG_ON(size == 0);
 
+	preempt_disable();
 	if (cpu_has_inclusive_pcaches) {
 		if (size >= scache_size)
 			r4k_blast_scache();
 		else
 			blast_scache_range(addr, addr + size);
+		preempt_enable();
 		__sync();
 		return;
 	}
@@ -621,6 +639,7 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 		R4600_HIT_CACHEOP_WAR_IMPL;
 		blast_dcache_range(addr, addr + size);
 	}
+	preempt_enable();
 
 	bc_wback_inv(addr, size);
 	__sync();
@@ -631,6 +650,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
 	/* Catch bad driver code */
 	BUG_ON(size == 0);
 
+	preempt_disable();
 	if (cpu_has_inclusive_pcaches) {
 		if (size >= scache_size)
 			r4k_blast_scache();
@@ -645,6 +665,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
 			 */
 			blast_inv_scache_range(addr, addr + size);
 		}
+		preempt_enable();
 		__sync();
 		return;
 	}
@@ -655,6 +676,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
 		R4600_HIT_CACHEOP_WAR_IMPL;
 		blast_inv_dcache_range(addr, addr + size);
 	}
+	preempt_enable();
 
 	bc_inv(addr, size);
 	__sync();
@@ -780,20 +802,30 @@ static inline void rm7k_erratum31(void)
 
 static inline void alias_74k_erratum(struct cpuinfo_mips *c)
 {
+	unsigned int imp = c->processor_id & PRID_IMP_MASK;
+	unsigned int rev = c->processor_id & PRID_REV_MASK;
+
 	/*
 	 * Early versions of the 74K do not update the cache tags on a
 	 * vtag miss/ptag hit which can occur in the case of KSEG0/KUSEG
 	 * aliases. In this case it is better to treat the cache as always
 	 * having aliases.
 	 */
-	if ((c->processor_id & 0xff) <= PRID_REV_ENCODE_332(2, 4, 0))
-		c->dcache.flags |= MIPS_CACHE_VTAG;
-	if ((c->processor_id & 0xff) == PRID_REV_ENCODE_332(2, 4, 0))
-		write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND);
-	if (((c->processor_id & 0xff00) == PRID_IMP_1074K) &&
-	    ((c->processor_id & 0xff) <= PRID_REV_ENCODE_332(1, 1, 0))) {
-		c->dcache.flags |= MIPS_CACHE_VTAG;
-		write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND);
+	switch (imp) {
+	case PRID_IMP_74K:
+		if (rev <= PRID_REV_ENCODE_332(2, 4, 0))
+			c->dcache.flags |= MIPS_CACHE_VTAG;
+		if (rev == PRID_REV_ENCODE_332(2, 4, 0))
+			write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND);
+		break;
+	case PRID_IMP_1074K:
+		if (rev <= PRID_REV_ENCODE_332(1, 1, 0)) {
+			c->dcache.flags |= MIPS_CACHE_VTAG;
+			write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND);
+		}
+		break;
+	default:
+		BUG();
 	}
 }
 
@@ -809,7 +841,7 @@ static void probe_pcache(void)
 	unsigned long config1;
 	unsigned int lsize;
 
-	switch (c->cputype) {
+	switch (current_cpu_type()) {
 	case CPU_R4600:			/* QED style two way caches? */
 	case CPU_R4700:
 	case CPU_R5000:
@@ -1025,7 +1057,8 @@ static void probe_pcache(void)
 	 * presumably no vendor is shipping his hardware in the "bad"
 	 * configuration.
 	 */
-	if ((prid & 0xff00) == PRID_IMP_R4000 && (prid & 0xff) < 0x40 &&
+	if ((prid & PRID_IMP_MASK) == PRID_IMP_R4000 &&
+	    (prid & PRID_REV_MASK) < PRID_REV_R4400 &&
 	    !(config & CONF_SC) && c->icache.linesz != 16 &&
 	    PAGE_SIZE <= 0x8000)
 		panic("Improper R4000SC processor configuration detected");
@@ -1045,7 +1078,7 @@ static void probe_pcache(void)
 	 * normally they'd suffer from aliases but magic in the hardware deals
 	 * with that for us so we don't need to take care ourselves.
 	 */
-	switch (c->cputype) {
+	switch (current_cpu_type()) {
 	case CPU_20KC:
 	case CPU_25KF:
 	case CPU_SB1:
@@ -1065,7 +1098,7 @@ static void probe_pcache(void)
 	case CPU_34K:
 	case CPU_74K:
 	case CPU_1004K:
-		if (c->cputype == CPU_74K)
+		if (current_cpu_type() == CPU_74K)
 			alias_74k_erratum(c);
 		if ((read_c0_config7() & (1 << 16))) {
 			/* effectively physically indexed dcache,
@@ -1078,7 +1111,7 @@ static void probe_pcache(void)
 			c->dcache.flags |= MIPS_CACHE_ALIASES;
 	}
 
-	switch (c->cputype) {
+	switch (current_cpu_type()) {
 	case CPU_20KC:
 		/*
 		 * Some older 20Kc chips doesn't have the 'VI' bit in
@@ -1090,15 +1123,14 @@ static void probe_pcache(void)
 	case CPU_ALCHEMY:
 		c->icache.flags |= MIPS_CACHE_IC_F_DC;
 		break;
-	}
 
-#ifdef	CONFIG_CPU_LOONGSON2
-	/*
-	 * LOONGSON2 has 4 way icache, but when using indexed cache op,
-	 * one op will act on all 4 ways
-	 */
-	c->icache.ways = 1;
-#endif
+	case CPU_LOONGSON2:
+		/*
+		 * LOONGSON2 has 4 way icache, but when using indexed cache op,
+		 * one op will act on all 4 ways
+		 */
+		c->icache.ways = 1;
+	}
 
 	printk("Primary instruction cache %ldkB, %s, %s, linesize %d bytes.\n",
 	       icache_size >> 10,
@@ -1174,7 +1206,6 @@ static int probe_scache(void)
 	return 1;
 }
 
-#if defined(CONFIG_CPU_LOONGSON2)
 static void __init loongson2_sc_init(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
@@ -1190,7 +1221,6 @@ static void __init loongson2_sc_init(void)
 
 	c->options |= MIPS_CPU_INCLUSIVE_CACHES;
 }
-#endif
 
 extern int r5k_sc_init(void);
 extern int rm7k_sc_init(void);
@@ -1207,7 +1237,7 @@ static void setup_scache(void)
 	 * processors don't have a S-cache that would be relevant to the
 	 * Linux memory management.
 	 */
-	switch (c->cputype) {
+	switch (current_cpu_type()) {
 	case CPU_R4000SC:
 	case CPU_R4000MC:
 	case CPU_R4400SC:
@@ -1240,11 +1270,10 @@ static void setup_scache(void)
 #endif
 		return;
 
-#if defined(CONFIG_CPU_LOONGSON2)
 	case CPU_LOONGSON2:
 		loongson2_sc_init();
 		return;
-#endif
+
 	case CPU_XLP:
 		/* don't need to worry about L2, fully coherent */
 		return;
@@ -1384,9 +1413,8 @@ static void r4k_cache_error_setup(void)
 {
 	extern char __weak except_vec2_generic;
 	extern char __weak except_vec2_sb1;
-	struct cpuinfo_mips *c = &current_cpu_data;
 
-	switch (c->cputype) {
+	switch (current_cpu_type()) {
 	case CPU_SB1:
 	case CPU_SB1A:
 		set_uncached_handler(0x100, &except_vec2_sb1, 0x80);
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index aaccf1c..2e94185 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -18,6 +18,7 @@
 #include <linux/highmem.h>
 
 #include <asm/cache.h>
+#include <asm/cpu-type.h>
 #include <asm/io.h>
 
 #include <dma-coherence.h>
@@ -50,16 +51,20 @@ static inline struct page *dma_addr_to_page(struct device *dev,
 }
 
 /*
+ * The affected CPUs below in 'cpu_needs_post_dma_flush()' can
+ * speculatively fill random cachelines with stale data at any time,
+ * requiring an extra flush post-DMA.
+ *
  * Warning on the terminology - Linux calls an uncached area coherent;
  * MIPS terminology calls memory areas with hardware maintained coherency
  * coherent.
  */
-
-static inline int cpu_is_noncoherent_r10000(struct device *dev)
+static inline int cpu_needs_post_dma_flush(struct device *dev)
 {
 	return !plat_device_is_coherent(dev) &&
-	       (current_cpu_type() == CPU_R10000 ||
-	       current_cpu_type() == CPU_R12000);
+	       (boot_cpu_type() == CPU_R10000 ||
+		boot_cpu_type() == CPU_R12000 ||
+		boot_cpu_type() == CPU_BMIPS5000);
 }
 
 static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp)
@@ -230,7 +235,7 @@ static inline void __dma_sync(struct page *page,
 static void mips_dma_unmap_page(struct device *dev, dma_addr_t dma_addr,
 	size_t size, enum dma_data_direction direction, struct dma_attrs *attrs)
 {
-	if (cpu_is_noncoherent_r10000(dev))
+	if (cpu_needs_post_dma_flush(dev))
 		__dma_sync(dma_addr_to_page(dev, dma_addr),
 			   dma_addr & ~PAGE_MASK, size, direction);
 
@@ -284,7 +289,7 @@ static void mips_dma_unmap_sg(struct device *dev, struct scatterlist *sg,
 static void mips_dma_sync_single_for_cpu(struct device *dev,
 	dma_addr_t dma_handle, size_t size, enum dma_data_direction direction)
 {
-	if (cpu_is_noncoherent_r10000(dev))
+	if (cpu_needs_post_dma_flush(dev))
 		__dma_sync(dma_addr_to_page(dev, dma_handle),
 			   dma_handle & ~PAGE_MASK, size, direction);
 }
@@ -292,7 +297,6 @@ static void mips_dma_sync_single_for_cpu(struct device *dev,
 static void mips_dma_sync_single_for_device(struct device *dev,
 	dma_addr_t dma_handle, size_t size, enum dma_data_direction direction)
 {
-	plat_extra_sync_for_device(dev);
 	if (!plat_device_is_coherent(dev))
 		__dma_sync(dma_addr_to_page(dev, dma_handle),
 			   dma_handle & ~PAGE_MASK, size, direction);
@@ -303,12 +307,10 @@ static void mips_dma_sync_sg_for_cpu(struct device *dev,
 {
 	int i;
 
-	/* Make sure that gcc doesn't leave the empty loop body.  */
-	for (i = 0; i < nelems; i++, sg++) {
-		if (cpu_is_noncoherent_r10000(dev))
+	if (cpu_needs_post_dma_flush(dev))
+		for (i = 0; i < nelems; i++, sg++)
 			__dma_sync(sg_page(sg), sg->offset, sg->length,
 				   direction);
-	}
 }
 
 static void mips_dma_sync_sg_for_device(struct device *dev,
@@ -316,17 +318,15 @@ static void mips_dma_sync_sg_for_device(struct device *dev,
 {
 	int i;
 
-	/* Make sure that gcc doesn't leave the empty loop body.  */
-	for (i = 0; i < nelems; i++, sg++) {
-		if (!plat_device_is_coherent(dev))
+	if (!plat_device_is_coherent(dev))
+		for (i = 0; i < nelems; i++, sg++)
 			__dma_sync(sg_page(sg), sg->offset, sg->length,
 				   direction);
-	}
 }
 
 int mips_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
-	return plat_dma_mapping_error(dev, dma_addr);
+	return 0;
 }
 
 int mips_dma_supported(struct device *dev, u64 mask)
@@ -339,7 +339,6 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 {
 	BUG_ON(direction == DMA_NONE);
 
-	plat_extra_sync_for_device(dev);
 	if (!plat_device_is_coherent(dev))
 		__dma_sync_virtual(vaddr, size, direction);
 }
diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c
index 85df1cd..becc42b 100644
--- a/arch/mips/mm/fault.c
+++ b/arch/mips/mm/fault.c
@@ -42,8 +42,7 @@ static void __kprobes __do_page_fault(struct pt_regs *regs, unsigned long write,
 	const int field = sizeof(unsigned long) * 2;
 	siginfo_t info;
 	int fault;
-	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
-						 (write ? FAULT_FLAG_WRITE : 0);
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
 
 #if 0
 	printk("Cpu%d[%s:%d:%0*lx:%ld:%0*lx]\n", raw_smp_processor_id(),
@@ -93,6 +92,8 @@ static void __kprobes __do_page_fault(struct pt_regs *regs, unsigned long write,
 	if (in_atomic() || !mm)
 		goto bad_area_nosemaphore;
 
+	if (user_mode(regs))
+		flags |= FAULT_FLAG_USER;
 retry:
 	down_read(&mm->mmap_sem);
 	vma = find_vma(mm, address);
@@ -114,6 +115,7 @@ good_area:
 	if (write) {
 		if (!(vma->vm_flags & VM_WRITE))
 			goto bad_area;
+		flags |= FAULT_FLAG_WRITE;
 	} else {
 		if (cpu_has_rixi) {
 			if (address == regs->cp0_epc && !(vma->vm_flags & VM_EXEC)) {
@@ -241,6 +243,8 @@ out_of_memory:
 	 * (which will retry the fault, or kill us if we got oom-killed).
 	 */
 	up_read(&mm->mmap_sem);
+	if (!user_mode(regs))
+		goto no_context;
 	pagefault_out_of_memory();
 	return;
 
diff --git a/arch/mips/mm/gup.c b/arch/mips/mm/gup.c
index d4ea5c9..06ce17c 100644
--- a/arch/mips/mm/gup.c
+++ b/arch/mips/mm/gup.c
@@ -12,6 +12,7 @@
 #include <linux/swap.h>
 #include <linux/hugetlb.h>
 
+#include <asm/cpu-features.h>
 #include <asm/pgtable.h>
 
 static inline pte_t gup_get_pte(pte_t *ptep)
@@ -273,7 +274,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 	len = (unsigned long) nr_pages << PAGE_SHIFT;
 
 	end = start + len;
-	if (end < start)
+	if (end < start || cpu_has_dc_aliases)
 		goto slow_irqon;
 
 	/* XXX: batch / limit 'nr' */
diff --git a/arch/mips/mm/hugetlbpage.c b/arch/mips/mm/hugetlbpage.c
index a7fee0d..01fda44 100644
--- a/arch/mips/mm/hugetlbpage.c
+++ b/arch/mips/mm/hugetlbpage.c
@@ -85,6 +85,11 @@ int pud_huge(pud_t pud)
 	return (pud_val(pud) & _PAGE_HUGE) != 0;
 }
 
+int pmd_huge_support(void)
+{
+	return 1;
+}
+
 struct page *
 follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 		pmd_t *pmd, int write)
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 4e73f10..e205ef5 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -254,6 +254,7 @@ void copy_from_user_page(struct vm_area_struct *vma,
 			SetPageDcacheDirty(page);
 	}
 }
+EXPORT_SYMBOL_GPL(copy_from_user_page);
 
 void __init fixrange_init(unsigned long start, unsigned long end,
 	pgd_t *pgd_base)
diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c
index 218c2109..cbd81d1 100644
--- a/arch/mips/mm/page.c
+++ b/arch/mips/mm/page.c
@@ -18,6 +18,7 @@
 
 #include <asm/bugs.h>
 #include <asm/cacheops.h>
+#include <asm/cpu-type.h>
 #include <asm/inst.h>
 #include <asm/io.h>
 #include <asm/page.h>
diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c
index 5d01392..08d05ae 100644
--- a/arch/mips/mm/sc-mips.c
+++ b/arch/mips/mm/sc-mips.c
@@ -6,6 +6,7 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 
+#include <asm/cpu-type.h>
 #include <asm/mipsregs.h>
 #include <asm/bcache.h>
 #include <asm/cacheops.h>
@@ -71,7 +72,7 @@ static inline int mips_sc_is_activated(struct cpuinfo_mips *c)
 	unsigned int tmp;
 
 	/* Check the bypass bit (L2B) */
-	switch (c->cputype) {
+	switch (current_cpu_type()) {
 	case CPU_34K:
 	case CPU_74K:
 	case CPU_1004K:
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index 00b26a6..da3b0b9 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 
 #include <asm/cpu.h>
+#include <asm/cpu-type.h>
 #include <asm/bootinfo.h>
 #include <asm/mmu_context.h>
 #include <asm/pgtable.h>
@@ -51,21 +52,26 @@ extern void build_tlb_refill_handler(void);
 
 #endif /* CONFIG_MIPS_MT_SMTC */
 
-#if defined(CONFIG_CPU_LOONGSON2)
 /*
  * LOONGSON2 has a 4 entry itlb which is a subset of dtlb,
  * unfortrunately, itlb is not totally transparent to software.
  */
-#define FLUSH_ITLB write_c0_diag(4);
-
-#define FLUSH_ITLB_VM(vma) { if ((vma)->vm_flags & VM_EXEC)  write_c0_diag(4); }
-
-#else
-
-#define FLUSH_ITLB
-#define FLUSH_ITLB_VM(vma)
+static inline void flush_itlb(void)
+{
+	switch (current_cpu_type()) {
+	case CPU_LOONGSON2:
+		write_c0_diag(4);
+		break;
+	default:
+		break;
+	}
+}
 
-#endif
+static inline void flush_itlb_vm(struct vm_area_struct *vma)
+{
+	if (vma->vm_flags & VM_EXEC)
+		flush_itlb();
+}
 
 void local_flush_tlb_all(void)
 {
@@ -92,7 +98,7 @@ void local_flush_tlb_all(void)
 	}
 	tlbw_use_hazard();
 	write_c0_entryhi(old_ctx);
-	FLUSH_ITLB;
+	flush_itlb();
 	EXIT_CRITICAL(flags);
 }
 EXPORT_SYMBOL(local_flush_tlb_all);
@@ -154,7 +160,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 		} else {
 			drop_mmu_context(mm, cpu);
 		}
-		FLUSH_ITLB;
+		flush_itlb();
 		EXIT_CRITICAL(flags);
 	}
 }
@@ -196,7 +202,7 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
 	} else {
 		local_flush_tlb_all();
 	}
-	FLUSH_ITLB;
+	flush_itlb();
 	EXIT_CRITICAL(flags);
 }
 
@@ -229,7 +235,7 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
 
 	finish:
 		write_c0_entryhi(oldpid);
-		FLUSH_ITLB_VM(vma);
+		flush_itlb_vm(vma);
 		EXIT_CRITICAL(flags);
 	}
 }
@@ -261,7 +267,7 @@ void local_flush_tlb_one(unsigned long page)
 		tlbw_use_hazard();
 	}
 	write_c0_entryhi(oldpid);
-	FLUSH_ITLB;
+	flush_itlb();
 	EXIT_CRITICAL(flags);
 }
 
@@ -334,7 +340,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
 			tlb_write_indexed();
 	}
 	tlbw_use_hazard();
-	FLUSH_ITLB_VM(vma);
+	flush_itlb_vm(vma);
 	EXIT_CRITICAL(flags);
 }
 
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 556cb48..183f2b5 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -30,6 +30,7 @@
 #include <linux/cache.h>
 
 #include <asm/cacheflush.h>
+#include <asm/cpu-type.h>
 #include <asm/pgtable.h>
 #include <asm/war.h>
 #include <asm/uasm.h>
@@ -85,6 +86,7 @@ static int use_bbit_insns(void)
 	case CPU_CAVIUM_OCTEON:
 	case CPU_CAVIUM_OCTEON_PLUS:
 	case CPU_CAVIUM_OCTEON2:
+	case CPU_CAVIUM_OCTEON3:
 		return 1;
 	default:
 		return 0;
@@ -95,6 +97,7 @@ static int use_lwx_insns(void)
 {
 	switch (current_cpu_type()) {
 	case CPU_CAVIUM_OCTEON2:
+	case CPU_CAVIUM_OCTEON3:
 		return 1;
 	default:
 		return 0;
@@ -337,10 +340,6 @@ static struct work_registers build_get_work_registers(u32 **p)
 {
 	struct work_registers r;
 
-	int smp_processor_id_reg;
-	int smp_processor_id_sel;
-	int smp_processor_id_shift;
-
 	if (scratch_reg >= 0) {
 		/* Save in CPU local C0_KScratch? */
 		UASM_i_MTC0(p, 1, c0_kscratch(), scratch_reg);
@@ -351,25 +350,9 @@ static struct work_registers build_get_work_registers(u32 **p)
 	}
 
 	if (num_possible_cpus() > 1) {
-#ifdef CONFIG_MIPS_PGD_C0_CONTEXT
-		smp_processor_id_shift = 51;
-		smp_processor_id_reg = 20; /* XContext */
-		smp_processor_id_sel = 0;
-#else
-# ifdef CONFIG_32BIT
-		smp_processor_id_shift = 25;
-		smp_processor_id_reg = 4; /* Context */
-		smp_processor_id_sel = 0;
-# endif
-# ifdef CONFIG_64BIT
-		smp_processor_id_shift = 26;
-		smp_processor_id_reg = 4; /* Context */
-		smp_processor_id_sel = 0;
-# endif
-#endif
 		/* Get smp_processor_id */
-		UASM_i_MFC0(p, K0, smp_processor_id_reg, smp_processor_id_sel);
-		UASM_i_SRL_SAFE(p, K0, K0, smp_processor_id_shift);
+		UASM_i_CPUID_MFC0(p, K0, SMP_CPUID_REG);
+		UASM_i_SRL_SAFE(p, K0, K0, SMP_CPUID_REGSHIFT);
 
 		/* handler_reg_save index in K0 */
 		UASM_i_SLL(p, K0, K0, ilog2(sizeof(struct tlb_reg_save)));
@@ -816,11 +799,11 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 	}
 	/* No uasm_i_nop needed here, since the next insn doesn't touch TMP. */
 
-#ifdef CONFIG_MIPS_PGD_C0_CONTEXT
 	if (pgd_reg != -1) {
 		/* pgd is in pgd_reg */
 		UASM_i_MFC0(p, ptr, c0_kscratch(), pgd_reg);
 	} else {
+#if defined(CONFIG_MIPS_PGD_C0_CONTEXT)
 		/*
 		 * &pgd << 11 stored in CONTEXT [23..63].
 		 */
@@ -832,30 +815,18 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 		/* 1 0	1 0 1  << 6  xkphys cached */
 		uasm_i_ori(p, ptr, ptr, 0x540);
 		uasm_i_drotr(p, ptr, ptr, 11);
-	}
 #elif defined(CONFIG_SMP)
-# ifdef	 CONFIG_MIPS_MT_SMTC
-	/*
-	 * SMTC uses TCBind value as "CPU" index
-	 */
-	uasm_i_mfc0(p, ptr, C0_TCBIND);
-	uasm_i_dsrl_safe(p, ptr, ptr, 19);
-# else
-	/*
-	 * 64 bit SMP running in XKPHYS has smp_processor_id() << 3
-	 * stored in CONTEXT.
-	 */
-	uasm_i_dmfc0(p, ptr, C0_CONTEXT);
-	uasm_i_dsrl_safe(p, ptr, ptr, 23);
-# endif
-	UASM_i_LA_mostly(p, tmp, pgdc);
-	uasm_i_daddu(p, ptr, ptr, tmp);
-	uasm_i_dmfc0(p, tmp, C0_BADVADDR);
-	uasm_i_ld(p, ptr, uasm_rel_lo(pgdc), ptr);
+		UASM_i_CPUID_MFC0(p, ptr, SMP_CPUID_REG);
+		uasm_i_dsrl_safe(p, ptr, ptr, SMP_CPUID_PTRSHIFT);
+		UASM_i_LA_mostly(p, tmp, pgdc);
+		uasm_i_daddu(p, ptr, ptr, tmp);
+		uasm_i_dmfc0(p, tmp, C0_BADVADDR);
+		uasm_i_ld(p, ptr, uasm_rel_lo(pgdc), ptr);
 #else
-	UASM_i_LA_mostly(p, ptr, pgdc);
-	uasm_i_ld(p, ptr, uasm_rel_lo(pgdc), ptr);
+		UASM_i_LA_mostly(p, ptr, pgdc);
+		uasm_i_ld(p, ptr, uasm_rel_lo(pgdc), ptr);
 #endif
+	}
 
 	uasm_l_vmalloc_done(l, *p);
 
@@ -950,31 +921,25 @@ build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 static void __maybe_unused
 build_get_pgde32(u32 **p, unsigned int tmp, unsigned int ptr)
 {
-	long pgdc = (long)pgd_current;
+	if (pgd_reg != -1) {
+		/* pgd is in pgd_reg */
+		uasm_i_mfc0(p, ptr, c0_kscratch(), pgd_reg);
+		uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
+	} else {
+		long pgdc = (long)pgd_current;
 
-	/* 32 bit SMP has smp_processor_id() stored in CONTEXT. */
+		/* 32 bit SMP has smp_processor_id() stored in CONTEXT. */
 #ifdef CONFIG_SMP
-#ifdef	CONFIG_MIPS_MT_SMTC
-	/*
-	 * SMTC uses TCBind value as "CPU" index
-	 */
-	uasm_i_mfc0(p, ptr, C0_TCBIND);
-	UASM_i_LA_mostly(p, tmp, pgdc);
-	uasm_i_srl(p, ptr, ptr, 19);
-#else
-	/*
-	 * smp_processor_id() << 2 is stored in CONTEXT.
-	 */
-	uasm_i_mfc0(p, ptr, C0_CONTEXT);
-	UASM_i_LA_mostly(p, tmp, pgdc);
-	uasm_i_srl(p, ptr, ptr, 23);
-#endif
-	uasm_i_addu(p, ptr, tmp, ptr);
+		uasm_i_mfc0(p, ptr, SMP_CPUID_REG);
+		UASM_i_LA_mostly(p, tmp, pgdc);
+		uasm_i_srl(p, ptr, ptr, SMP_CPUID_PTRSHIFT);
+		uasm_i_addu(p, ptr, tmp, ptr);
 #else
-	UASM_i_LA_mostly(p, ptr, pgdc);
+		UASM_i_LA_mostly(p, ptr, pgdc);
 #endif
-	uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
-	uasm_i_lw(p, ptr, uasm_rel_lo(pgdc), ptr);
+		uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
+		uasm_i_lw(p, ptr, uasm_rel_lo(pgdc), ptr);
+	}
 	uasm_i_srl(p, tmp, tmp, PGDIR_SHIFT); /* get pgd only bits */
 	uasm_i_sll(p, tmp, tmp, PGD_T_LOG2);
 	uasm_i_addu(p, ptr, ptr, tmp); /* add in pgd offset */
@@ -1346,95 +1311,100 @@ static void build_r4000_tlb_refill_handler(void)
 	 * need three, with the second nop'ed and the third being
 	 * unused.
 	 */
-	/* Loongson2 ebase is different than r4k, we have more space */
-#if defined(CONFIG_32BIT) || defined(CONFIG_CPU_LOONGSON2)
-	if ((p - tlb_handler) > 64)
-		panic("TLB refill handler space exceeded");
-#else
-	if (((p - tlb_handler) > (MIPS64_REFILL_INSNS * 2) - 1)
-	    || (((p - tlb_handler) > (MIPS64_REFILL_INSNS * 2) - 3)
-		&& uasm_insn_has_bdelay(relocs,
-					tlb_handler + MIPS64_REFILL_INSNS - 3)))
-		panic("TLB refill handler space exceeded");
-#endif
-
-	/*
-	 * Now fold the handler in the TLB refill handler space.
-	 */
-#if defined(CONFIG_32BIT) || defined(CONFIG_CPU_LOONGSON2)
-	f = final_handler;
-	/* Simplest case, just copy the handler. */
-	uasm_copy_handler(relocs, labels, tlb_handler, p, f);
-	final_len = p - tlb_handler;
-#else /* CONFIG_64BIT */
-	f = final_handler + MIPS64_REFILL_INSNS;
-	if ((p - tlb_handler) <= MIPS64_REFILL_INSNS) {
-		/* Just copy the handler. */
-		uasm_copy_handler(relocs, labels, tlb_handler, p, f);
-		final_len = p - tlb_handler;
-	} else {
-#ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
-		const enum label_id ls = label_tlb_huge_update;
-#else
-		const enum label_id ls = label_vmalloc;
-#endif
-		u32 *split;
-		int ov = 0;
-		int i;
-
-		for (i = 0; i < ARRAY_SIZE(labels) && labels[i].lab != ls; i++)
-			;
-		BUG_ON(i == ARRAY_SIZE(labels));
-		split = labels[i].addr;
-
-		/*
-		 * See if we have overflown one way or the other.
-		 */
-		if (split > tlb_handler + MIPS64_REFILL_INSNS ||
-		    split < p - MIPS64_REFILL_INSNS)
-			ov = 1;
-
-		if (ov) {
+	switch (boot_cpu_type()) {
+	default:
+		if (sizeof(long) == 4) {
+	case CPU_LOONGSON2:
+		/* Loongson2 ebase is different than r4k, we have more space */
+			if ((p - tlb_handler) > 64)
+				panic("TLB refill handler space exceeded");
 			/*
-			 * Split two instructions before the end.  One
-			 * for the branch and one for the instruction
-			 * in the delay slot.
+			 * Now fold the handler in the TLB refill handler space.
 			 */
-			split = tlb_handler + MIPS64_REFILL_INSNS - 2;
-
+			f = final_handler;
+			/* Simplest case, just copy the handler. */
+			uasm_copy_handler(relocs, labels, tlb_handler, p, f);
+			final_len = p - tlb_handler;
+			break;
+		} else {
+			if (((p - tlb_handler) > (MIPS64_REFILL_INSNS * 2) - 1)
+			    || (((p - tlb_handler) > (MIPS64_REFILL_INSNS * 2) - 3)
+				&& uasm_insn_has_bdelay(relocs,
+							tlb_handler + MIPS64_REFILL_INSNS - 3)))
+				panic("TLB refill handler space exceeded");
 			/*
-			 * If the branch would fall in a delay slot,
-			 * we must back up an additional instruction
-			 * so that it is no longer in a delay slot.
+			 * Now fold the handler in the TLB refill handler space.
 			 */
-			if (uasm_insn_has_bdelay(relocs, split - 1))
-				split--;
-		}
-		/* Copy first part of the handler. */
-		uasm_copy_handler(relocs, labels, tlb_handler, split, f);
-		f += split - tlb_handler;
-
-		if (ov) {
-			/* Insert branch. */
-			uasm_l_split(&l, final_handler);
-			uasm_il_b(&f, &r, label_split);
-			if (uasm_insn_has_bdelay(relocs, split))
-				uasm_i_nop(&f);
-			else {
-				uasm_copy_handler(relocs, labels,
-						  split, split + 1, f);
-				uasm_move_labels(labels, f, f + 1, -1);
-				f++;
-				split++;
+			f = final_handler + MIPS64_REFILL_INSNS;
+			if ((p - tlb_handler) <= MIPS64_REFILL_INSNS) {
+				/* Just copy the handler. */
+				uasm_copy_handler(relocs, labels, tlb_handler, p, f);
+				final_len = p - tlb_handler;
+			} else {
+#ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
+				const enum label_id ls = label_tlb_huge_update;
+#else
+				const enum label_id ls = label_vmalloc;
+#endif
+				u32 *split;
+				int ov = 0;
+				int i;
+
+				for (i = 0; i < ARRAY_SIZE(labels) && labels[i].lab != ls; i++)
+					;
+				BUG_ON(i == ARRAY_SIZE(labels));
+				split = labels[i].addr;
+
+				/*
+				 * See if we have overflown one way or the other.
+				 */
+				if (split > tlb_handler + MIPS64_REFILL_INSNS ||
+				    split < p - MIPS64_REFILL_INSNS)
+					ov = 1;
+
+				if (ov) {
+					/*
+					 * Split two instructions before the end.  One
+					 * for the branch and one for the instruction
+					 * in the delay slot.
+					 */
+					split = tlb_handler + MIPS64_REFILL_INSNS - 2;
+
+					/*
+					 * If the branch would fall in a delay slot,
+					 * we must back up an additional instruction
+					 * so that it is no longer in a delay slot.
+					 */
+					if (uasm_insn_has_bdelay(relocs, split - 1))
+						split--;
+				}
+				/* Copy first part of the handler. */
+				uasm_copy_handler(relocs, labels, tlb_handler, split, f);
+				f += split - tlb_handler;
+
+				if (ov) {
+					/* Insert branch. */
+					uasm_l_split(&l, final_handler);
+					uasm_il_b(&f, &r, label_split);
+					if (uasm_insn_has_bdelay(relocs, split))
+						uasm_i_nop(&f);
+					else {
+						uasm_copy_handler(relocs, labels,
+								  split, split + 1, f);
+						uasm_move_labels(labels, f, f + 1, -1);
+						f++;
+						split++;
+					}
+				}
+
+				/* Copy the rest of the handler. */
+				uasm_copy_handler(relocs, labels, split, p, final_handler);
+				final_len = (f - (final_handler + MIPS64_REFILL_INSNS)) +
+					    (p - split);
 			}
 		}
-
-		/* Copy the rest of the handler. */
-		uasm_copy_handler(relocs, labels, split, p, final_handler);
-		final_len = (f - (final_handler + MIPS64_REFILL_INSNS)) +
-			    (p - split);
+		break;
 	}
-#endif /* CONFIG_64BIT */
 
 	uasm_resolve_relocs(relocs, labels);
 	pr_debug("Wrote TLB refill handler (%u instructions).\n",
@@ -1448,28 +1418,30 @@ static void build_r4000_tlb_refill_handler(void)
 extern u32 handle_tlbl[], handle_tlbl_end[];
 extern u32 handle_tlbs[], handle_tlbs_end[];
 extern u32 handle_tlbm[], handle_tlbm_end[];
-
-#ifdef CONFIG_MIPS_PGD_C0_CONTEXT
 extern u32 tlbmiss_handler_setup_pgd[], tlbmiss_handler_setup_pgd_end[];
 
-static void build_r4000_setup_pgd(void)
+static void build_setup_pgd(void)
 {
 	const int a0 = 4;
-	const int a1 = 5;
+	const int __maybe_unused a1 = 5;
+	const int __maybe_unused a2 = 6;
 	u32 *p = tlbmiss_handler_setup_pgd;
 	const int tlbmiss_handler_setup_pgd_size =
 		tlbmiss_handler_setup_pgd_end - tlbmiss_handler_setup_pgd;
-	struct uasm_label *l = labels;
-	struct uasm_reloc *r = relocs;
+#ifndef CONFIG_MIPS_PGD_C0_CONTEXT
+	long pgdc = (long)pgd_current;
+#endif
 
 	memset(tlbmiss_handler_setup_pgd, 0, tlbmiss_handler_setup_pgd_size *
 					sizeof(tlbmiss_handler_setup_pgd[0]));
 	memset(labels, 0, sizeof(labels));
 	memset(relocs, 0, sizeof(relocs));
-
 	pgd_reg = allocate_kscratch();
-
+#ifdef CONFIG_MIPS_PGD_C0_CONTEXT
 	if (pgd_reg == -1) {
+		struct uasm_label *l = labels;
+		struct uasm_reloc *r = relocs;
+
 		/* PGD << 11 in c0_Context */
 		/*
 		 * If it is a ckseg0 address, convert to a physical
@@ -1491,6 +1463,26 @@ static void build_r4000_setup_pgd(void)
 		uasm_i_jr(&p, 31);
 		UASM_i_MTC0(&p, a0, c0_kscratch(), pgd_reg);
 	}
+#else
+#ifdef CONFIG_SMP
+	/* Save PGD to pgd_current[smp_processor_id()] */
+	UASM_i_CPUID_MFC0(&p, a1, SMP_CPUID_REG);
+	UASM_i_SRL_SAFE(&p, a1, a1, SMP_CPUID_PTRSHIFT);
+	UASM_i_LA_mostly(&p, a2, pgdc);
+	UASM_i_ADDU(&p, a2, a2, a1);
+	UASM_i_SW(&p, a0, uasm_rel_lo(pgdc), a2);
+#else
+	UASM_i_LA_mostly(&p, a2, pgdc);
+	UASM_i_SW(&p, a0, uasm_rel_lo(pgdc), a2);
+#endif /* SMP */
+	uasm_i_jr(&p, 31);
+
+	/* if pgd_reg is allocated, save PGD also to scratch register */
+	if (pgd_reg != -1)
+		UASM_i_MTC0(&p, a0, c0_kscratch(), pgd_reg);
+	else
+		uasm_i_nop(&p);
+#endif
 	if (p >= tlbmiss_handler_setup_pgd_end)
 		panic("tlbmiss_handler_setup_pgd space exceeded");
 
@@ -1501,7 +1493,6 @@ static void build_r4000_setup_pgd(void)
 	dump_handler("tlbmiss_handler", tlbmiss_handler_setup_pgd,
 					tlbmiss_handler_setup_pgd_size);
 }
-#endif
 
 static void
 iPTE_LW(u32 **p, unsigned int pte, unsigned int ptr)
@@ -2194,10 +2185,8 @@ static void flush_tlb_handlers(void)
 			   (unsigned long)handle_tlbs_end);
 	local_flush_icache_range((unsigned long)handle_tlbm,
 			   (unsigned long)handle_tlbm_end);
-#ifdef CONFIG_MIPS_PGD_C0_CONTEXT
 	local_flush_icache_range((unsigned long)tlbmiss_handler_setup_pgd,
 			   (unsigned long)tlbmiss_handler_setup_pgd_end);
-#endif
 }
 
 void build_tlb_refill_handler(void)
@@ -2229,6 +2218,7 @@ void build_tlb_refill_handler(void)
 		if (!run_once) {
 			if (!cpu_has_local_ebase)
 				build_r3000_tlb_refill_handler();
+			build_setup_pgd();
 			build_r3000_tlb_load_handler();
 			build_r3000_tlb_store_handler();
 			build_r3000_tlb_modify_handler();
@@ -2252,9 +2242,7 @@ void build_tlb_refill_handler(void)
 	default:
 		if (!run_once) {
 			scratch_reg = allocate_kscratch();
-#ifdef CONFIG_MIPS_PGD_C0_CONTEXT
-			build_r4000_setup_pgd();
-#endif
+			build_setup_pgd();
 			build_r4000_tlb_load_handler();
 			build_r4000_tlb_store_handler();
 			build_r4000_tlb_modify_handler();
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index c69da37..0892575 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -37,7 +37,6 @@
 #include <asm/irq_regs.h>
 #include <asm/mips-boards/malta.h>
 #include <asm/mips-boards/maltaint.h>
-#include <asm/mips-boards/piix4.h>
 #include <asm/gt64120.h>
 #include <asm/mips-boards/generic.h>
 #include <asm/mips-boards/msc01_pci.h>
@@ -473,7 +472,7 @@ static void __init fill_ipi_map(void)
 {
 	int cpu;
 
-	for (cpu = 0; cpu < NR_CPUS; cpu++) {
+	for (cpu = 0; cpu < nr_cpu_ids; cpu++) {
 		fill_ipi_map1(gic_resched_int_base, cpu, GIC_CPU_INT1);
 		fill_ipi_map1(gic_call_int_base, cpu, GIC_CPU_INT2);
 	}
@@ -574,8 +573,9 @@ void __init arch_init_irq(void)
 		/* FIXME */
 		int i;
 #if defined(CONFIG_MIPS_MT_SMP)
-		gic_call_int_base = GIC_NUM_INTRS - NR_CPUS;
-		gic_resched_int_base = gic_call_int_base - NR_CPUS;
+		gic_call_int_base = GIC_NUM_INTRS -
+			(NR_CPUS - nr_cpu_ids) * 2 - nr_cpu_ids;
+		gic_resched_int_base = gic_call_int_base - nr_cpu_ids;
 		fill_ipi_map();
 #endif
 		gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map,
@@ -599,7 +599,7 @@ void __init arch_init_irq(void)
 		printk("CPU%d: status register now %08x\n", smp_processor_id(), read_c0_status());
 		write_c0_status(0x1100dc00);
 		printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status());
-		for (i = 0; i < NR_CPUS; i++) {
+		for (i = 0; i < nr_cpu_ids; i++) {
 			arch_init_ipiirq(MIPS_GIC_IRQ_BASE +
 					 GIC_RESCHED_INT(i), &irq_resched);
 			arch_init_ipiirq(MIPS_GIC_IRQ_BASE +
diff --git a/arch/mips/mti-malta/malta-time.c b/arch/mips/mti-malta/malta-time.c
index 53aad4a..a18af5f 100644
--- a/arch/mips/mti-malta/malta-time.c
+++ b/arch/mips/mti-malta/malta-time.c
@@ -27,6 +27,7 @@
 #include <linux/timex.h>
 #include <linux/mc146818rtc.h>
 
+#include <asm/cpu.h>
 #include <asm/mipsregs.h>
 #include <asm/mipsmtregs.h>
 #include <asm/hardirq.h>
@@ -76,7 +77,7 @@ static void __init estimate_frequencies(void)
 #endif
 
 #if defined (CONFIG_KVM_GUEST) && defined (CONFIG_KVM_HOST_FREQ)
-	unsigned int prid = read_c0_prid() & 0xffff00;
+	unsigned int prid = read_c0_prid() & (PRID_COMP_MASK | PRID_IMP_MASK);
 
 	/*
 	 * XXXKYMA: hardwire the CPU frequency to Host Freq/4
@@ -169,7 +170,7 @@ unsigned int get_c0_compare_int(void)
 
 void __init plat_time_init(void)
 {
-	unsigned int prid = read_c0_prid() & 0xffff00;
+	unsigned int prid = read_c0_prid() & (PRID_COMP_MASK | PRID_IMP_MASK);
 	unsigned int freq;
 
 	estimate_frequencies();
diff --git a/arch/mips/mti-sead3/sead3-time.c b/arch/mips/mti-sead3/sead3-time.c
index a43ea3c..552d26c 100644
--- a/arch/mips/mti-sead3/sead3-time.c
+++ b/arch/mips/mti-sead3/sead3-time.c
@@ -7,6 +7,7 @@
  */
 #include <linux/init.h>
 
+#include <asm/cpu.h>
 #include <asm/setup.h>
 #include <asm/time.h>
 #include <asm/irq.h>
@@ -34,7 +35,7 @@ static void __iomem *status_reg = (void __iomem *)0xbf000410;
  */
 static unsigned int __init estimate_cpu_frequency(void)
 {
-	unsigned int prid = read_c0_prid() & 0xffff00;
+	unsigned int prid = read_c0_prid() & (PRID_COMP_MASK | PRID_IMP_MASK);
 	unsigned int tick = 0;
 	unsigned int freq;
 	unsigned int orig;
diff --git a/arch/mips/netlogic/Kconfig b/arch/mips/netlogic/Kconfig
index 2447bf9..852a4ee 100644
--- a/arch/mips/netlogic/Kconfig
+++ b/arch/mips/netlogic/Kconfig
@@ -19,6 +19,15 @@ config DT_XLP_SVP
 	  pointer to the kernel.  The corresponding DTS file is at
 	  arch/mips/netlogic/dts/xlp_svp.dts
 
+config DT_XLP_FVP
+	bool "Built-in device tree for XLP FVP boards"
+	default y
+	help
+	  Add an FDT blob for XLP FVP board into the kernel.
+	  This DTB will be used if the firmware does not pass in a DTB
+	  pointer to the kernel.  The corresponding DTS file is at
+	  arch/mips/netlogic/dts/xlp_fvp.dts
+
 config NLM_MULTINODE
 	bool "Support for multi-chip boards"
 	depends on NLM_XLP_BOARD
diff --git a/arch/mips/netlogic/common/smp.c b/arch/mips/netlogic/common/smp.c
index 4e35d9c..c0eded0 100644
--- a/arch/mips/netlogic/common/smp.c
+++ b/arch/mips/netlogic/common/smp.c
@@ -106,9 +106,7 @@ void nlm_early_init_secondary(int cpu)
 {
 	change_c0_config(CONF_CM_CMASK, 0x3);
 #ifdef CONFIG_CPU_XLP
-	/* mmu init, once per core */
-	if (cpu % NLM_THREADS_PER_CORE == 0)
-		xlp_mmu_init();
+	xlp_mmu_init();
 #endif
 	write_c0_ebase(nlm_current_node()->ebase);
 }
@@ -247,7 +245,7 @@ static int nlm_parse_cpumask(cpumask_t *wakeup_mask)
 	return threadmode;
 
 unsupp:
-	panic("Unsupported CPU mask %lx\n",
+	panic("Unsupported CPU mask %lx",
 		(unsigned long)cpumask_bits(wakeup_mask)[0]);
 	return 0;
 }
diff --git a/arch/mips/netlogic/common/time.c b/arch/mips/netlogic/common/time.c
index 045a396..13391b8 100644
--- a/arch/mips/netlogic/common/time.c
+++ b/arch/mips/netlogic/common/time.c
@@ -45,6 +45,7 @@
 #if defined(CONFIG_CPU_XLP)
 #include <asm/netlogic/xlp-hal/iomap.h>
 #include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/sys.h>
 #include <asm/netlogic/xlp-hal/pic.h>
 #elif defined(CONFIG_CPU_XLR)
 #include <asm/netlogic/xlr/iomap.h>
@@ -91,7 +92,7 @@ static void nlm_init_pic_timer(void)
 		csrc_pic.read	= nlm_get_pic_timer;
 	}
 	csrc_pic.rating = 1000;
-	clocksource_register_hz(&csrc_pic, PIC_CLK_HZ);
+	clocksource_register_hz(&csrc_pic, pic_timer_freq());
 }
 
 void __init plat_time_init(void)
diff --git a/arch/mips/netlogic/dts/Makefile b/arch/mips/netlogic/dts/Makefile
index aecb6fa..0b9be5f 100644
--- a/arch/mips/netlogic/dts/Makefile
+++ b/arch/mips/netlogic/dts/Makefile
@@ -1,2 +1,3 @@
 obj-$(CONFIG_DT_XLP_EVP) := xlp_evp.dtb.o
 obj-$(CONFIG_DT_XLP_SVP) += xlp_svp.dtb.o
+obj-$(CONFIG_DT_XLP_FVP) += xlp_fvp.dtb.o
diff --git a/arch/mips/netlogic/dts/xlp_evp.dts b/arch/mips/netlogic/dts/xlp_evp.dts
index 0640703..89ad048 100644
--- a/arch/mips/netlogic/dts/xlp_evp.dts
+++ b/arch/mips/netlogic/dts/xlp_evp.dts
@@ -9,19 +9,12 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	memory {
-		device_type = "memory";
-		reg =  <0 0x00100000 0 0x0FF00000	// 255M at 1M
-			0 0x20000000 0 0xa0000000	// 2560M at 512M
-			0 0xe0000000 1 0x00000000>;
-	};
-
 	soc {
 		#address-cells = <2>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
 		ranges = <0 0  0 0x18000000  0x04000000   // PCIe CFG
-			  1 0  0 0x16000000  0x01000000>; // GBU chipselects
+			  1 0  0 0x16000000  0x02000000>; // GBU chipselects
 
 		serial0: serial@30000 {
 			device_type = "serial";
diff --git a/arch/mips/netlogic/dts/xlp_fvp.dts b/arch/mips/netlogic/dts/xlp_fvp.dts
new file mode 100644
index 0000000..63e62b7
--- /dev/null
+++ b/arch/mips/netlogic/dts/xlp_fvp.dts
@@ -0,0 +1,118 @@
+/*
+ * XLP2XX Device Tree Source for FVP boards
+ */
+
+/dts-v1/;
+/ {
+	model = "netlogic,XLP-FVP";
+	compatible = "netlogic,xlp";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0 0  0 0x18000000  0x04000000   // PCIe CFG
+			  1 0  0 0x16000000  0x02000000>; // GBU chipselects
+
+		serial0: serial@30000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0 0x30100 0xa00>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <133333333>;
+			interrupt-parent = <&pic>;
+			interrupts = <17>;
+		};
+		serial1: serial@31000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0 0x31100 0xa00>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <133333333>;
+			interrupt-parent = <&pic>;
+			interrupts = <18>;
+		};
+		i2c0: ocores@37100 {
+			compatible = "opencores,i2c-ocores";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x37100 0x20>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <32000000>;
+			interrupt-parent = <&pic>;
+			interrupts = <30>;
+		};
+		i2c1: ocores@37120 {
+			compatible = "opencores,i2c-ocores";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x37120 0x20>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <32000000>;
+			interrupt-parent = <&pic>;
+			interrupts = <31>;
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+
+			dtt@4c {
+				compatible = "national,lm90";
+				reg = <0x4c>;
+			};
+		};
+		pic: pic@4000 {
+			compatible = "netlogic,xlp-pic";
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			reg = <0 0x4000 0x200>;
+			interrupt-controller;
+		};
+
+		nor_flash@1,0 {
+			compatible = "cfi-flash";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <2>;
+			reg = <1 0 0x1000000>;
+
+			partition@0 {
+				label = "x-loader";
+				reg = <0x0 0x100000>; /* 1M */
+				read-only;
+			};
+
+			partition@100000 {
+				label = "u-boot";
+				reg = <0x100000 0x100000>; /* 1M */
+			};
+
+			partition@200000 {
+				label = "kernel";
+				reg = <0x200000 0x500000>; /* 5M */
+			};
+
+			partition@700000 {
+				label = "rootfs";
+				reg = <0x700000 0x800000>; /* 8M */
+			};
+
+			partition@f00000 {
+				label = "env";
+				reg = <0xf00000 0x100000>; /* 1M */
+				read-only;
+			};
+		};
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
+	};
+};
diff --git a/arch/mips/netlogic/dts/xlp_svp.dts b/arch/mips/netlogic/dts/xlp_svp.dts
index 9c5db10..1ebd00ed 100644
--- a/arch/mips/netlogic/dts/xlp_svp.dts
+++ b/arch/mips/netlogic/dts/xlp_svp.dts
@@ -9,19 +9,12 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	memory {
-		device_type = "memory";
-		reg =  <0 0x00100000 0 0x0FF00000	// 255M at 1M
-			0 0x20000000 0 0xa0000000	// 2560M at 512M
-			0 0xe0000000 0 0x40000000>;
-	};
-
 	soc {
 		#address-cells = <2>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
 		ranges = <0 0  0 0x18000000  0x04000000   // PCIe CFG
-			  1 0  0 0x16000000  0x01000000>; // GBU chipselects
+			  1 0  0 0x16000000  0x02000000>; // GBU chipselects
 
 		serial0: serial@30000 {
 			device_type = "serial";
diff --git a/arch/mips/netlogic/xlp/Makefile b/arch/mips/netlogic/xlp/Makefile
index 85ac4a8..ed9a93c 100644
--- a/arch/mips/netlogic/xlp/Makefile
+++ b/arch/mips/netlogic/xlp/Makefile
@@ -1,3 +1,4 @@
 obj-y				+= setup.o nlm_hal.o cop2-ex.o dt.o
 obj-$(CONFIG_SMP)		+= wakeup.o
 obj-$(CONFIG_USB)		+= usb-init.o
+obj-$(CONFIG_USB)		+= usb-init-xlp2.o
diff --git a/arch/mips/netlogic/xlp/dt.c b/arch/mips/netlogic/xlp/dt.c
index a15cdbb..88df445 100644
--- a/arch/mips/netlogic/xlp/dt.c
+++ b/arch/mips/netlogic/xlp/dt.c
@@ -39,12 +39,18 @@
 #include <linux/of_platform.h>
 #include <linux/of_device.h>
 
-extern u32 __dtb_xlp_evp_begin[], __dtb_xlp_svp_begin[], __dtb_start[];
+extern u32 __dtb_xlp_evp_begin[], __dtb_xlp_svp_begin[],
+	__dtb_xlp_fvp_begin[], __dtb_start[];
 
 void __init *xlp_dt_init(void *fdtp)
 {
 	if (!fdtp) {
 		switch (current_cpu_data.processor_id & 0xff00) {
+#ifdef CONFIG_DT_XLP_FVP
+		case PRID_IMP_NETLOGIC_XLP2XX:
+			fdtp = __dtb_xlp_fvp_begin;
+			break;
+#endif
 #ifdef CONFIG_DT_XLP_SVP
 		case PRID_IMP_NETLOGIC_XLP3XX:
 			fdtp = __dtb_xlp_svp_begin;
diff --git a/arch/mips/netlogic/xlp/nlm_hal.c b/arch/mips/netlogic/xlp/nlm_hal.c
index 87560e4..56c50ba 100644
--- a/arch/mips/netlogic/xlp/nlm_hal.c
+++ b/arch/mips/netlogic/xlp/nlm_hal.c
@@ -44,6 +44,7 @@
 #include <asm/netlogic/haldefs.h>
 #include <asm/netlogic/xlp-hal/iomap.h>
 #include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/bridge.h>
 #include <asm/netlogic/xlp-hal/pic.h>
 #include <asm/netlogic/xlp-hal/sys.h>
 
@@ -64,6 +65,7 @@ int nlm_irq_to_irt(int irq)
 	uint64_t pcibase;
 	int devoff, irt;
 
+	devoff = 0;
 	switch (irq) {
 	case PIC_UART_0_IRQ:
 		devoff = XLP_IO_UART0_OFFSET(0);
@@ -71,44 +73,68 @@ int nlm_irq_to_irt(int irq)
 	case PIC_UART_1_IRQ:
 		devoff = XLP_IO_UART1_OFFSET(0);
 		break;
-	case PIC_EHCI_0_IRQ:
-		devoff = XLP_IO_USB_EHCI0_OFFSET(0);
-		break;
-	case PIC_EHCI_1_IRQ:
-		devoff = XLP_IO_USB_EHCI1_OFFSET(0);
-		break;
-	case PIC_OHCI_0_IRQ:
-		devoff = XLP_IO_USB_OHCI0_OFFSET(0);
-		break;
-	case PIC_OHCI_1_IRQ:
-		devoff = XLP_IO_USB_OHCI1_OFFSET(0);
-		break;
-	case PIC_OHCI_2_IRQ:
-		devoff = XLP_IO_USB_OHCI2_OFFSET(0);
-		break;
-	case PIC_OHCI_3_IRQ:
-		devoff = XLP_IO_USB_OHCI3_OFFSET(0);
-		break;
 	case PIC_MMC_IRQ:
 		devoff = XLP_IO_SD_OFFSET(0);
 		break;
-	case PIC_I2C_0_IRQ:
-		devoff = XLP_IO_I2C0_OFFSET(0);
-		break;
+	case PIC_I2C_0_IRQ:	/* I2C will be fixed up */
 	case PIC_I2C_1_IRQ:
-		devoff = XLP_IO_I2C1_OFFSET(0);
+	case PIC_I2C_2_IRQ:
+	case PIC_I2C_3_IRQ:
+		if (cpu_is_xlpii())
+			devoff = XLP2XX_IO_I2C_OFFSET(0);
+		else
+			devoff = XLP_IO_I2C0_OFFSET(0);
 		break;
 	default:
-		devoff = 0;
-		break;
+		if (cpu_is_xlpii()) {
+			switch (irq) {
+				/* XLP2XX has three XHCI USB controller */
+			case PIC_2XX_XHCI_0_IRQ:
+				devoff = XLP2XX_IO_USB_XHCI0_OFFSET(0);
+				break;
+			case PIC_2XX_XHCI_1_IRQ:
+				devoff = XLP2XX_IO_USB_XHCI1_OFFSET(0);
+				break;
+			case PIC_2XX_XHCI_2_IRQ:
+				devoff = XLP2XX_IO_USB_XHCI2_OFFSET(0);
+				break;
+			}
+		} else {
+			switch (irq) {
+			case PIC_EHCI_0_IRQ:
+				devoff = XLP_IO_USB_EHCI0_OFFSET(0);
+				break;
+			case PIC_EHCI_1_IRQ:
+				devoff = XLP_IO_USB_EHCI1_OFFSET(0);
+				break;
+			case PIC_OHCI_0_IRQ:
+				devoff = XLP_IO_USB_OHCI0_OFFSET(0);
+				break;
+			case PIC_OHCI_1_IRQ:
+				devoff = XLP_IO_USB_OHCI1_OFFSET(0);
+				break;
+			case PIC_OHCI_2_IRQ:
+				devoff = XLP_IO_USB_OHCI2_OFFSET(0);
+				break;
+			case PIC_OHCI_3_IRQ:
+				devoff = XLP_IO_USB_OHCI3_OFFSET(0);
+				break;
+			}
+		}
 	}
 
 	if (devoff != 0) {
 		pcibase = nlm_pcicfg_base(devoff);
 		irt = nlm_read_reg(pcibase, XLP_PCI_IRTINFO_REG) & 0xffff;
-		/* HW bug, I2C 1 irt entry is off by one */
-		if (irq == PIC_I2C_1_IRQ)
-			irt = irt + 1;
+		/* HW weirdness, I2C IRT entry has to be fixed up */
+		switch (irq) {
+		case PIC_I2C_1_IRQ:
+			irt = irt + 1; break;
+		case PIC_I2C_2_IRQ:
+			irt = irt + 2; break;
+		case PIC_I2C_3_IRQ:
+			irt = irt + 3; break;
+		}
 	} else if (irq >= PIC_PCIE_LINK_0_IRQ && irq <= PIC_PCIE_LINK_3_IRQ) {
 		/* HW bug, PCI IRT entries are bad on early silicon, fix */
 		irt = PIC_IRT_PCIE_LINK_INDEX(irq - PIC_PCIE_LINK_0_IRQ);
@@ -126,19 +152,160 @@ unsigned int nlm_get_core_frequency(int node, int core)
 
 	sysbase = nlm_get_node(node)->sysbase;
 	rstval = nlm_read_sys_reg(sysbase, SYS_POWER_ON_RESET_CFG);
-	dfsval = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIV_VALUE);
-	pll_divf = ((rstval >> 10) & 0x7f) + 1;
-	pll_divr = ((rstval >> 8)  & 0x3) + 1;
-	ext_div	 = ((rstval >> 30) & 0x3) + 1;
-	dfs_div	 = ((dfsval >> (core * 4)) & 0xf) + 1;
-
-	num = 800000000ULL * pll_divf;
-	denom = 3 * pll_divr * ext_div * dfs_div;
+	if (cpu_is_xlpii()) {
+		num = 1000000ULL * (400 * 3 + 100 * (rstval >> 26));
+		denom = 3;
+	} else {
+		dfsval = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIV_VALUE);
+		pll_divf = ((rstval >> 10) & 0x7f) + 1;
+		pll_divr = ((rstval >> 8)  & 0x3) + 1;
+		ext_div  = ((rstval >> 30) & 0x3) + 1;
+		dfs_div  = ((dfsval >> (core * 4)) & 0xf) + 1;
+
+		num = 800000000ULL * pll_divf;
+		denom = 3 * pll_divr * ext_div * dfs_div;
+	}
 	do_div(num, denom);
 	return (unsigned int)num;
 }
 
+/* Calculate Frequency to the PIC from PLL.
+ * freq_out = ( ref_freq/2 * (6 + ctrl2[7:0]) + ctrl2[20:8]/2^13 ) /
+ * ((2^ctrl0[7:5]) * Table(ctrl0[26:24]))
+ */
+static unsigned int nlm_2xx_get_pic_frequency(int node)
+{
+	u32 ctrl_val0, ctrl_val2, vco_post_div, pll_post_div;
+	u32 mdiv, fdiv, pll_out_freq_den, reg_select, ref_div, pic_div;
+	u64 ref_clk, sysbase, pll_out_freq_num, ref_clk_select;
+
+	sysbase = nlm_get_node(node)->sysbase;
+
+	/* Find ref_clk_base */
+	ref_clk_select =
+		(nlm_read_sys_reg(sysbase, SYS_POWER_ON_RESET_CFG) >> 18) & 0x3;
+	switch (ref_clk_select) {
+	case 0:
+		ref_clk = 200000000ULL;
+		ref_div = 3;
+		break;
+	case 1:
+		ref_clk = 100000000ULL;
+		ref_div = 1;
+		break;
+	case 2:
+		ref_clk = 125000000ULL;
+		ref_div = 1;
+		break;
+	case 3:
+		ref_clk = 400000000ULL;
+		ref_div = 3;
+		break;
+	}
+
+	/* Find the clock source PLL device for PIC */
+	reg_select = (nlm_read_sys_reg(sysbase, SYS_CLK_DEV_SEL) >> 22) & 0x3;
+	switch (reg_select) {
+	case 0:
+		ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0);
+		ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2);
+		break;
+	case 1:
+		ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0_DEVX(0));
+		ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2_DEVX(0));
+		break;
+	case 2:
+		ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0_DEVX(1));
+		ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2_DEVX(1));
+		break;
+	case 3:
+		ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0_DEVX(2));
+		ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2_DEVX(2));
+		break;
+	}
+
+	vco_post_div = (ctrl_val0 >> 5) & 0x7;
+	pll_post_div = (ctrl_val0 >> 24) & 0x7;
+	mdiv = ctrl_val2 & 0xff;
+	fdiv = (ctrl_val2 >> 8) & 0xfff;
+
+	/* Find PLL post divider value */
+	switch (pll_post_div) {
+	case 1:
+		pll_post_div = 2;
+		break;
+	case 3:
+		pll_post_div = 4;
+		break;
+	case 7:
+		pll_post_div = 8;
+		break;
+	case 6:
+		pll_post_div = 16;
+		break;
+	case 0:
+	default:
+		pll_post_div = 1;
+		break;
+	}
+
+	fdiv = fdiv/(1 << 13);
+	pll_out_freq_num = ((ref_clk >> 1) * (6 + mdiv)) + fdiv;
+	pll_out_freq_den = (1 << vco_post_div) * pll_post_div * 3;
+
+	if (pll_out_freq_den > 0)
+		do_div(pll_out_freq_num, pll_out_freq_den);
+
+	/* PIC post divider, which happens after PLL */
+	pic_div = (nlm_read_sys_reg(sysbase, SYS_CLK_DEV_DIV) >> 22) & 0x3;
+	do_div(pll_out_freq_num, 1 << pic_div);
+
+	return pll_out_freq_num;
+}
+
+unsigned int nlm_get_pic_frequency(int node)
+{
+	if (cpu_is_xlpii())
+		return nlm_2xx_get_pic_frequency(node);
+	else
+		return 133333333;
+}
+
 unsigned int nlm_get_cpu_frequency(void)
 {
 	return nlm_get_core_frequency(0, 0);
 }
+
+/*
+ * Fills upto 8 pairs of entries containing the DRAM map of a node
+ * if n < 0, get dram map for all nodes
+ */
+int xlp_get_dram_map(int n, uint64_t *dram_map)
+{
+	uint64_t bridgebase, base, lim;
+	uint32_t val;
+	int i, node, rv;
+
+	/* Look only at mapping on Node 0, we don't handle crazy configs */
+	bridgebase = nlm_get_bridge_regbase(0);
+	rv = 0;
+	for (i = 0; i < 8; i++) {
+		val = nlm_read_bridge_reg(bridgebase,
+					BRIDGE_DRAM_NODE_TRANSLN(i));
+		node = (val >> 1) & 0x3;
+		if (n >= 0 && n != node)
+			continue;
+		val = nlm_read_bridge_reg(bridgebase, BRIDGE_DRAM_BAR(i));
+		val = (val >>  12) & 0xfffff;
+		base = (uint64_t) val << 20;
+		val = nlm_read_bridge_reg(bridgebase, BRIDGE_DRAM_LIMIT(i));
+		val = (val >>  12) & 0xfffff;
+		if (val == 0)   /* BAR not used */
+			continue;
+		lim = ((uint64_t)val + 1) << 20;
+		dram_map[rv] = base;
+		dram_map[rv + 1] = lim;
+		rv += 2;
+	}
+	return rv;
+}
diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c
index 7b638f7..76a7131 100644
--- a/arch/mips/netlogic/xlp/setup.c
+++ b/arch/mips/netlogic/xlp/setup.c
@@ -73,6 +73,23 @@ static void nlm_fixup_mem(void)
 	}
 }
 
+static void __init xlp_init_mem_from_bars(void)
+{
+	uint64_t map[16];
+	int i, n;
+
+	n = xlp_get_dram_map(-1, map);	/* -1: info for all nodes */
+	for (i = 0; i < n; i += 2) {
+		/* exclude 0x1000_0000-0x2000_0000, u-boot device */
+		if (map[i] <= 0x10000000 && map[i+1] > 0x10000000)
+			map[i+1] = 0x10000000;
+		if (map[i] > 0x10000000 && map[i] < 0x20000000)
+			map[i] = 0x20000000;
+
+		add_memory_region(map[i], map[i+1] - map[i], BOOT_MEM_RAM);
+	}
+}
+
 void __init plat_mem_setup(void)
 {
 	panic_timeout	= 5;
@@ -82,12 +99,23 @@ void __init plat_mem_setup(void)
 
 	/* memory and bootargs from DT */
 	early_init_devtree(initial_boot_params);
+
+	if (boot_mem_map.nr_map == 0) {
+		pr_info("Using DRAM BARs for memory map.\n");
+		xlp_init_mem_from_bars();
+	}
+	/* Calculate and setup wired entries for mapped kernel */
 	nlm_fixup_mem();
 }
 
 const char *get_system_type(void)
 {
-	return "Netlogic XLP Series";
+	switch (read_c0_prid() & 0xff00) {
+	case PRID_IMP_NETLOGIC_XLP2XX:
+		return "Broadcom XLPII Series";
+	default:
+		return "Netlogic XLP Series";
+	}
 }
 
 void __init prom_free_prom_memory(void)
@@ -97,12 +125,20 @@ void __init prom_free_prom_memory(void)
 
 void xlp_mmu_init(void)
 {
-	/* enable extended TLB and Large Fixed TLB */
-	write_c0_config6(read_c0_config6() | 0x24);
-
-	/* set page mask of Fixed TLB in config7 */
-	write_c0_config7(PM_DEFAULT_MASK >>
-		(13 + (ffz(PM_DEFAULT_MASK >> 13) / 2)));
+	u32 conf4;
+
+	if (cpu_is_xlpii()) {
+		/* XLPII series has extended pagesize in config 4 */
+		conf4 = read_c0_config4() & ~0x1f00u;
+		write_c0_config4(conf4 | ((PAGE_SHIFT - 10) / 2 << 8));
+	} else {
+		/* enable extended TLB and Large Fixed TLB */
+		write_c0_config6(read_c0_config6() | 0x24);
+
+		/* set page mask of extended Fixed TLB in config7 */
+		write_c0_config7(PM_DEFAULT_MASK >>
+			(13 + (ffz(PM_DEFAULT_MASK >> 13) / 2)));
+	}
 }
 
 void nlm_percpu_init(int hwcpuid)
diff --git a/arch/mips/netlogic/xlp/usb-init-xlp2.c b/arch/mips/netlogic/xlp/usb-init-xlp2.c
new file mode 100644
index 0000000..36e9c22
--- /dev/null
+++ b/arch/mips/netlogic/xlp/usb-init-xlp2.c
@@ -0,0 +1,218 @@
+/*
+ * Copyright (c) 2003-2013 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+
+#include <asm/netlogic/common.h>
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+
+#define XLPII_USB3_CTL_0		0xc0
+#define XLPII_VAUXRST			BIT(0)
+#define XLPII_VCCRST			BIT(1)
+#define XLPII_NUM2PORT			9
+#define XLPII_NUM3PORT			13
+#define XLPII_RTUNEREQ			BIT(20)
+#define XLPII_MS_CSYSREQ		BIT(21)
+#define XLPII_XS_CSYSREQ		BIT(22)
+#define XLPII_RETENABLEN		BIT(23)
+#define XLPII_TX2RX			BIT(24)
+#define XLPII_XHCIREV			BIT(25)
+#define XLPII_ECCDIS			BIT(26)
+
+#define XLPII_USB3_INT_REG		0xc2
+#define XLPII_USB3_INT_MASK		0xc3
+
+#define XLPII_USB_PHY_TEST		0xc6
+#define XLPII_PRESET			BIT(0)
+#define XLPII_ATERESET			BIT(1)
+#define XLPII_LOOPEN			BIT(2)
+#define XLPII_TESTPDHSP			BIT(3)
+#define XLPII_TESTPDSSP			BIT(4)
+#define XLPII_TESTBURNIN		BIT(5)
+
+#define XLPII_USB_PHY_LOS_LV		0xc9
+#define XLPII_LOSLEV			0
+#define XLPII_LOSBIAS			5
+#define XLPII_SQRXTX			8
+#define XLPII_TXBOOST			11
+#define XLPII_RSLKSEL			16
+#define XLPII_FSEL			20
+
+#define XLPII_USB_RFCLK_REG		0xcc
+#define XLPII_VVLD			30
+
+#define nlm_read_usb_reg(b, r)		nlm_read_reg(b, r)
+#define nlm_write_usb_reg(b, r, v)	nlm_write_reg(b, r, v)
+
+#define nlm_xlpii_get_usb_pcibase(node, inst)		\
+	nlm_pcicfg_base(XLP2XX_IO_USB_OFFSET(node, inst))
+#define nlm_xlpii_get_usb_regbase(node, inst)		\
+	(nlm_xlpii_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ)
+
+static void xlpii_usb_ack(struct irq_data *data)
+{
+	u64 port_addr;
+
+	switch (data->irq) {
+	case PIC_2XX_XHCI_0_IRQ:
+		port_addr = nlm_xlpii_get_usb_regbase(0, 1);
+		break;
+	case PIC_2XX_XHCI_1_IRQ:
+		port_addr = nlm_xlpii_get_usb_regbase(0, 2);
+		break;
+	case PIC_2XX_XHCI_2_IRQ:
+		port_addr = nlm_xlpii_get_usb_regbase(0, 3);
+		break;
+	default:
+		pr_err("No matching USB irq!\n");
+		return;
+	}
+	nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff);
+}
+
+static void nlm_xlpii_usb_hw_reset(int node, int port)
+{
+	u64 port_addr, xhci_base, pci_base;
+	void __iomem *corebase;
+	u32 val;
+
+	port_addr = nlm_xlpii_get_usb_regbase(node, port);
+
+	/* Set frequency */
+	val = nlm_read_usb_reg(port_addr, XLPII_USB_PHY_LOS_LV);
+	val &= ~(0x3f << XLPII_FSEL);
+	val |= (0x27 << XLPII_FSEL);
+	nlm_write_usb_reg(port_addr, XLPII_USB_PHY_LOS_LV, val);
+
+	val = nlm_read_usb_reg(port_addr, XLPII_USB_RFCLK_REG);
+	val |= (1 << XLPII_VVLD);
+	nlm_write_usb_reg(port_addr, XLPII_USB_RFCLK_REG, val);
+
+	/* PHY reset */
+	val = nlm_read_usb_reg(port_addr, XLPII_USB_PHY_TEST);
+	val &= (XLPII_ATERESET | XLPII_LOOPEN | XLPII_TESTPDHSP
+		| XLPII_TESTPDSSP | XLPII_TESTBURNIN);
+	nlm_write_usb_reg(port_addr, XLPII_USB_PHY_TEST, val);
+
+	/* Setup control register */
+	val =  XLPII_VAUXRST | XLPII_VCCRST | (1 << XLPII_NUM2PORT)
+		| (1 << XLPII_NUM3PORT) | XLPII_MS_CSYSREQ | XLPII_XS_CSYSREQ
+		| XLPII_RETENABLEN | XLPII_XHCIREV;
+	nlm_write_usb_reg(port_addr, XLPII_USB3_CTL_0, val);
+
+	/* Enable interrupts */
+	nlm_write_usb_reg(port_addr, XLPII_USB3_INT_MASK, 0x00000001);
+
+	/* Clear all interrupts */
+	nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff);
+
+	udelay(2000);
+
+	/* XHCI configuration at PCI mem */
+	pci_base = nlm_xlpii_get_usb_pcibase(node, port);
+	xhci_base = nlm_read_usb_reg(pci_base, 0x4) & ~0xf;
+	corebase = ioremap(xhci_base, 0x10000);
+	if (!corebase)
+		return;
+
+	writel(0x240002, corebase + 0xc2c0);
+	/* GCTL 0xc110 */
+	val = readl(corebase + 0xc110);
+	val &= ~(0x3 << 12);
+	val |= (1 << 12);
+	writel(val, corebase + 0xc110);
+	udelay(100);
+
+	/* PHYCFG 0xc200 */
+	val = readl(corebase + 0xc200);
+	val &= ~(1 << 6);
+	writel(val, corebase + 0xc200);
+	udelay(100);
+
+	/* PIPECTL 0xc2c0 */
+	val = readl(corebase + 0xc2c0);
+	val &= ~(1 << 17);
+	writel(val, corebase + 0xc2c0);
+
+	iounmap(corebase);
+}
+
+static int __init nlm_platform_xlpii_usb_init(void)
+{
+	if (!cpu_is_xlpii())
+		return 0;
+
+	pr_info("Initializing 2XX USB Interface\n");
+	nlm_xlpii_usb_hw_reset(0, 1);
+	nlm_xlpii_usb_hw_reset(0, 2);
+	nlm_xlpii_usb_hw_reset(0, 3);
+	nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_0_IRQ, xlpii_usb_ack);
+	nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_1_IRQ, xlpii_usb_ack);
+	nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_2_IRQ, xlpii_usb_ack);
+
+	return 0;
+}
+
+arch_initcall(nlm_platform_xlpii_usb_init);
+
+static u64 xlp_usb_dmamask = ~(u32)0;
+
+/* Fixup IRQ for USB devices on XLP the SoC PCIe bus */
+static void nlm_usb_fixup_final(struct pci_dev *dev)
+{
+	dev->dev.dma_mask		= &xlp_usb_dmamask;
+	dev->dev.coherent_dma_mask	= DMA_BIT_MASK(32);
+	switch (dev->devfn) {
+	case 0x21:
+		dev->irq = PIC_2XX_XHCI_0_IRQ;
+		break;
+	case 0x22:
+		dev->irq = PIC_2XX_XHCI_1_IRQ;
+		break;
+	case 0x23:
+		dev->irq = PIC_2XX_XHCI_2_IRQ;
+		break;
+	}
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_XHCI,
+		nlm_usb_fixup_final);
diff --git a/arch/mips/netlogic/xlp/usb-init.c b/arch/mips/netlogic/xlp/usb-init.c
index ef3897e..f811798 100644
--- a/arch/mips/netlogic/xlp/usb-init.c
+++ b/arch/mips/netlogic/xlp/usb-init.c
@@ -75,8 +75,7 @@ static void nlm_usb_intr_en(int node, int port)
 	port_addr = nlm_get_usb_regbase(node, port);
 	val = nlm_read_usb_reg(port_addr, USB_INT_EN);
 	val = USB_CTRL_INTERRUPT_EN  | USB_OHCI_INTERRUPT_EN |
-		USB_OHCI_INTERRUPT1_EN | USB_CTRL_INTERRUPT_EN	|
-		USB_OHCI_INTERRUPT_EN | USB_OHCI_INTERRUPT2_EN;
+		USB_OHCI_INTERRUPT1_EN | USB_OHCI_INTERRUPT2_EN;
 	nlm_write_usb_reg(port_addr, USB_INT_EN, val);
 }
 
@@ -100,6 +99,9 @@ static void nlm_usb_hw_reset(int node, int port)
 
 static int __init nlm_platform_usb_init(void)
 {
+	if (cpu_is_xlpii())
+		return 0;
+
 	pr_info("Initializing USB Interface\n");
 	nlm_usb_hw_reset(0, 0);
 	nlm_usb_hw_reset(0, 3);
diff --git a/arch/mips/netlogic/xlp/wakeup.c b/arch/mips/netlogic/xlp/wakeup.c
index 0cce37c..682d563 100644
--- a/arch/mips/netlogic/xlp/wakeup.c
+++ b/arch/mips/netlogic/xlp/wakeup.c
@@ -58,10 +58,12 @@ static int xlp_wakeup_core(uint64_t sysbase, int node, int core)
 
 	coremask = (1 << core);
 
-	/* Enable CPU clock */
-	value = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIS_CTRL);
-	value &= ~coremask;
-	nlm_write_sys_reg(sysbase, SYS_CORE_DFS_DIS_CTRL, value);
+	/* Enable CPU clock in case of 8xx/3xx */
+	if (!cpu_is_xlpii()) {
+		value = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIS_CTRL);
+		value &= ~coremask;
+		nlm_write_sys_reg(sysbase, SYS_CORE_DFS_DIS_CTRL, value);
+	}
 
 	/* Remove CPU Reset */
 	value = nlm_read_sys_reg(sysbase, SYS_CPU_RESET);
diff --git a/arch/mips/netlogic/xlr/fmn-config.c b/arch/mips/netlogic/xlr/fmn-config.c
index ed3bf0e..c7622c6 100644
--- a/arch/mips/netlogic/xlr/fmn-config.c
+++ b/arch/mips/netlogic/xlr/fmn-config.c
@@ -36,6 +36,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 
+#include <asm/cpu.h>
 #include <asm/mipsregs.h>
 #include <asm/netlogic/xlr/fmn.h>
 #include <asm/netlogic/xlr/xlr.h>
@@ -187,7 +188,7 @@ void xlr_board_info_setup(void)
 	int processor_id, num_core;
 
 	num_core = hweight32(nlm_current_node()->coremask);
-	processor_id = read_c0_prid() & 0xff00;
+	processor_id = read_c0_prid() & PRID_IMP_MASK;
 
 	setup_cpu_fmninfo(cpu, num_core);
 	switch (processor_id) {
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index af763e8..4d1736f 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -12,6 +12,7 @@
 #include <linux/oprofile.h>
 #include <linux/smp.h>
 #include <asm/cpu-info.h>
+#include <asm/cpu-type.h>
 
 #include "op_impl.h"
 
@@ -33,7 +34,7 @@ static int op_mips_setup(void)
 	return 0;
 }
 
-static int op_mips_create_files(struct super_block *sb, struct dentry *root)
+static int op_mips_create_files(struct dentry *root)
 {
 	int i;
 
@@ -42,16 +43,16 @@ static int op_mips_create_files(struct super_block *sb, struct dentry *root)
 		char buf[4];
 
 		snprintf(buf, sizeof buf, "%d", i);
-		dir = oprofilefs_mkdir(sb, root, buf);
-
-		oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
-		oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
-		oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
-		oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
-		oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
-		oprofilefs_create_ulong(sb, dir, "exl", &ctr[i].exl);
+		dir = oprofilefs_mkdir(root, buf);
+
+		oprofilefs_create_ulong(dir, "enabled", &ctr[i].enabled);
+		oprofilefs_create_ulong(dir, "event", &ctr[i].event);
+		oprofilefs_create_ulong(dir, "count", &ctr[i].count);
+		oprofilefs_create_ulong(dir, "kernel", &ctr[i].kernel);
+		oprofilefs_create_ulong(dir, "user", &ctr[i].user);
+		oprofilefs_create_ulong(dir, "exl", &ctr[i].exl);
 		/* Dummy.  */
-		oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
+		oprofilefs_create_ulong(dir, "unit_mask", &ctr[i].unit_mask);
 	}
 
 	return 0;
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index c382042..719e455 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80)	+= pci-bcm1480.o pci-bcm1480ht.o
 obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops-sni.o
 obj-$(CONFIG_LANTIQ)		+= fixup-lantiq.o
 obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o ops-lantiq.o
+obj-$(CONFIG_SOC_RT3883)	+= pci-rt3883.o
 obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
 obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
 obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
diff --git a/arch/mips/pci/fixup-malta.c b/arch/mips/pci/fixup-malta.c
index 07ada7f..df36e23 100644
--- a/arch/mips/pci/fixup-malta.c
+++ b/arch/mips/pci/fixup-malta.c
@@ -1,5 +1,6 @@
 #include <linux/init.h>
 #include <linux/pci.h>
+#include <asm/mips-boards/piix4.h>
 
 /* PCI interrupt pins */
 #define PCIA		1
@@ -53,7 +54,8 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
 static void malta_piix_func0_fixup(struct pci_dev *pdev)
 {
 	unsigned char reg_val;
-	static int piixirqmap[16] = {  /* PIIX PIRQC[A:D] irq mappings */
+	/* PIIX PIRQC[A:D] irq mappings */
+	static int piixirqmap[PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_MAX] = {
 		0,  0,	0,  3,
 		4,  5,	6,  7,
 		0,  9, 10, 11,
@@ -63,11 +65,12 @@ static void malta_piix_func0_fixup(struct pci_dev *pdev)
 
 	/* Interrogate PIIX4 to get PCI IRQ mapping */
 	for (i = 0; i <= 3; i++) {
-		pci_read_config_byte(pdev, 0x60+i, &reg_val);
-		if (reg_val & 0x80)
+		pci_read_config_byte(pdev, PIIX4_FUNC0_PIRQRC+i, &reg_val);
+		if (reg_val & PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_DISABLE)
 			pci_irq[PCIA+i] = 0;	/* Disabled */
 		else
-			pci_irq[PCIA+i] = piixirqmap[reg_val & 15];
+			pci_irq[PCIA+i] = piixirqmap[reg_val &
+				PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_MASK];
 	}
 
 	/* Done by YAMON 2.00 onwards */
@@ -76,8 +79,9 @@ static void malta_piix_func0_fixup(struct pci_dev *pdev)
 		 * Set top of main memory accessible by ISA or DMA
 		 * devices to 16 Mb.
 		 */
-		pci_read_config_byte(pdev, 0x69, &reg_val);
-		pci_write_config_byte(pdev, 0x69, reg_val | 0xf0);
+		pci_read_config_byte(pdev, PIIX4_FUNC0_TOM, &reg_val);
+		pci_write_config_byte(pdev, PIIX4_FUNC0_TOM, reg_val |
+				PIIX4_FUNC0_TOM_TOP_OF_MEMORY_MASK);
 	}
 }
 
@@ -93,10 +97,14 @@ static void malta_piix_func1_fixup(struct pci_dev *pdev)
 		/*
 		 * IDE Decode enable.
 		 */
-		pci_read_config_byte(pdev, 0x41, &reg_val);
-		pci_write_config_byte(pdev, 0x41, reg_val|0x80);
-		pci_read_config_byte(pdev, 0x43, &reg_val);
-		pci_write_config_byte(pdev, 0x43, reg_val|0x80);
+		pci_read_config_byte(pdev, PIIX4_FUNC1_IDETIM_PRIMARY_HI,
+			&reg_val);
+		pci_write_config_byte(pdev, PIIX4_FUNC1_IDETIM_PRIMARY_HI,
+			reg_val|PIIX4_FUNC1_IDETIM_PRIMARY_HI_IDE_DECODE_EN);
+		pci_read_config_byte(pdev, PIIX4_FUNC1_IDETIM_SECONDARY_HI,
+			&reg_val);
+		pci_write_config_byte(pdev, PIIX4_FUNC1_IDETIM_SECONDARY_HI,
+			reg_val|PIIX4_FUNC1_IDETIM_SECONDARY_HI_IDE_DECODE_EN);
 	}
 }
 
@@ -108,10 +116,12 @@ static void quirk_dlcsetup(struct pci_dev *dev)
 {
 	u8 odlc, ndlc;
 
-	(void) pci_read_config_byte(dev, 0x82, &odlc);
+	(void) pci_read_config_byte(dev, PIIX4_FUNC0_DLC, &odlc);
 	/* Enable passive releases and delayed transaction */
-	ndlc = odlc | 7;
-	(void) pci_write_config_byte(dev, 0x82, ndlc);
+	ndlc = odlc | PIIX4_FUNC0_DLC_USBPR_EN |
+		      PIIX4_FUNC0_DLC_PASSIVE_RELEASE_EN |
+		      PIIX4_FUNC0_DLC_DELAYED_TRANSACTION_EN;
+	(void) pci_write_config_byte(dev, PIIX4_FUNC0_DLC, ndlc);
 }
 
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0,
diff --git a/arch/mips/pci/pci-ar71xx.c b/arch/mips/pci/pci-ar71xx.c
index 18517dd..d471a26 100644
--- a/arch/mips/pci/pci-ar71xx.c
+++ b/arch/mips/pci/pci-ar71xx.c
@@ -363,9 +363,6 @@ static int ar71xx_pci_probe(struct platform_device *pdev)
 	spin_lock_init(&apc->lock);
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base");
-	if (!res)
-		return -EINVAL;
-
 	apc->cfg_base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(apc->cfg_base))
 		return PTR_ERR(apc->cfg_base);
diff --git a/arch/mips/pci/pci-ar724x.c b/arch/mips/pci/pci-ar724x.c
index 65ec032..785b265 100644
--- a/arch/mips/pci/pci-ar724x.c
+++ b/arch/mips/pci/pci-ar724x.c
@@ -362,25 +362,16 @@ static int ar724x_pci_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl_base");
-	if (!res)
-		return -EINVAL;
-
 	apc->ctrl_base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(apc->ctrl_base))
 		return PTR_ERR(apc->ctrl_base);
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base");
-	if (!res)
-		return -EINVAL;
-
 	apc->devcfg_base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(apc->devcfg_base))
 		return PTR_ERR(apc->devcfg_base);
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "crp_base");
-	if (!res)
-		return -EINVAL;
-
 	apc->crp_base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(apc->crp_base))
 		return PTR_ERR(apc->crp_base);
diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c
index 44dd5aa..5ec2a7b 100644
--- a/arch/mips/pci/pci-bcm1480.c
+++ b/arch/mips/pci/pci-bcm1480.c
@@ -39,6 +39,7 @@
 #include <linux/mm.h>
 #include <linux/console.h>
 #include <linux/tty.h>
+#include <linux/vt.h>
 
 #include <asm/sibyte/bcm1480_regs.h>
 #include <asm/sibyte/bcm1480_scd.h>
diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c
index 95c2ea8..59cccd9 100644
--- a/arch/mips/pci/pci-octeon.c
+++ b/arch/mips/pci/pci-octeon.c
@@ -586,15 +586,16 @@ static int __init octeon_pci_setup(void)
 	else
 		octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_BIG;
 
-	/* PCI I/O and PCI MEM values */
-	set_io_port_base(OCTEON_PCI_IOSPACE_BASE);
-	ioport_resource.start = 0;
-	ioport_resource.end = OCTEON_PCI_IOSPACE_SIZE - 1;
 	if (!octeon_is_pci_host()) {
 		pr_notice("Not in host mode, PCI Controller not initialized\n");
 		return 0;
 	}
 
+	/* PCI I/O and PCI MEM values */
+	set_io_port_base(OCTEON_PCI_IOSPACE_BASE);
+	ioport_resource.start = 0;
+	ioport_resource.end = OCTEON_PCI_IOSPACE_SIZE - 1;
+
 	pr_notice("%s Octeon big bar support\n",
 		  (octeon_dma_bar_type ==
 		  OCTEON_DMA_BAR_TYPE_BIG) ? "Enabling" : "Disabling");
diff --git a/arch/mips/pci/pci-rt3883.c b/arch/mips/pci/pci-rt3883.c
new file mode 100644
index 0000000..95c9d41
--- /dev/null
+++ b/arch/mips/pci/pci-rt3883.c
@@ -0,0 +1,636 @@
+/*
+ *  Ralink RT3662/RT3883 SoC PCI support
+ *
+ *  Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ralink/rt3883.h>
+#include <asm/mach-ralink/ralink_regs.h>
+
+#define RT3883_MEMORY_BASE		0x00000000
+#define RT3883_MEMORY_SIZE		0x02000000
+
+#define RT3883_PCI_REG_PCICFG		0x00
+#define   RT3883_PCICFG_P2P_BR_DEVNUM_M 0xf
+#define   RT3883_PCICFG_P2P_BR_DEVNUM_S 16
+#define   RT3883_PCICFG_PCIRST		BIT(1)
+#define RT3883_PCI_REG_PCIRAW		0x04
+#define RT3883_PCI_REG_PCIINT		0x08
+#define RT3883_PCI_REG_PCIENA		0x0c
+
+#define RT3883_PCI_REG_CFGADDR		0x20
+#define RT3883_PCI_REG_CFGDATA		0x24
+#define RT3883_PCI_REG_MEMBASE		0x28
+#define RT3883_PCI_REG_IOBASE		0x2c
+#define RT3883_PCI_REG_ARBCTL		0x80
+
+#define RT3883_PCI_REG_BASE(_x)		(0x1000 + (_x) * 0x1000)
+#define RT3883_PCI_REG_BAR0SETUP(_x)	(RT3883_PCI_REG_BASE((_x)) + 0x10)
+#define RT3883_PCI_REG_IMBASEBAR0(_x)	(RT3883_PCI_REG_BASE((_x)) + 0x18)
+#define RT3883_PCI_REG_ID(_x)		(RT3883_PCI_REG_BASE((_x)) + 0x30)
+#define RT3883_PCI_REG_CLASS(_x)	(RT3883_PCI_REG_BASE((_x)) + 0x34)
+#define RT3883_PCI_REG_SUBID(_x)	(RT3883_PCI_REG_BASE((_x)) + 0x38)
+#define RT3883_PCI_REG_STATUS(_x)	(RT3883_PCI_REG_BASE((_x)) + 0x50)
+
+#define RT3883_PCI_MODE_NONE	0
+#define RT3883_PCI_MODE_PCI	BIT(0)
+#define RT3883_PCI_MODE_PCIE	BIT(1)
+#define RT3883_PCI_MODE_BOTH	(RT3883_PCI_MODE_PCI | RT3883_PCI_MODE_PCIE)
+
+#define RT3883_PCI_IRQ_COUNT	32
+
+#define RT3883_P2P_BR_DEVNUM	1
+
+struct rt3883_pci_controller {
+	void __iomem *base;
+	spinlock_t lock;
+
+	struct device_node *intc_of_node;
+	struct irq_domain *irq_domain;
+
+	struct pci_controller pci_controller;
+	struct resource io_res;
+	struct resource mem_res;
+
+	bool pcie_ready;
+};
+
+static inline struct rt3883_pci_controller *
+pci_bus_to_rt3883_controller(struct pci_bus *bus)
+{
+	struct pci_controller *hose;
+
+	hose = (struct pci_controller *) bus->sysdata;
+	return container_of(hose, struct rt3883_pci_controller, pci_controller);
+}
+
+static inline u32 rt3883_pci_r32(struct rt3883_pci_controller *rpc,
+				 unsigned reg)
+{
+	return ioread32(rpc->base + reg);
+}
+
+static inline void rt3883_pci_w32(struct rt3883_pci_controller *rpc,
+				  u32 val, unsigned reg)
+{
+	iowrite32(val, rpc->base + reg);
+}
+
+static inline u32 rt3883_pci_get_cfgaddr(unsigned int bus, unsigned int slot,
+					 unsigned int func, unsigned int where)
+{
+	return (bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) |
+	       0x80000000;
+}
+
+static u32 rt3883_pci_read_cfg32(struct rt3883_pci_controller *rpc,
+			       unsigned bus, unsigned slot,
+			       unsigned func, unsigned reg)
+{
+	unsigned long flags;
+	u32 address;
+	u32 ret;
+
+	address = rt3883_pci_get_cfgaddr(bus, slot, func, reg);
+
+	spin_lock_irqsave(&rpc->lock, flags);
+	rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
+	ret = rt3883_pci_r32(rpc, RT3883_PCI_REG_CFGDATA);
+	spin_unlock_irqrestore(&rpc->lock, flags);
+
+	return ret;
+}
+
+static void rt3883_pci_write_cfg32(struct rt3883_pci_controller *rpc,
+				 unsigned bus, unsigned slot,
+				 unsigned func, unsigned reg, u32 val)
+{
+	unsigned long flags;
+	u32 address;
+
+	address = rt3883_pci_get_cfgaddr(bus, slot, func, reg);
+
+	spin_lock_irqsave(&rpc->lock, flags);
+	rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
+	rt3883_pci_w32(rpc, val, RT3883_PCI_REG_CFGDATA);
+	spin_unlock_irqrestore(&rpc->lock, flags);
+}
+
+static void rt3883_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct rt3883_pci_controller *rpc;
+	u32 pending;
+
+	rpc = irq_get_handler_data(irq);
+
+	pending = rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIINT) &
+		  rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
+
+	if (!pending) {
+		spurious_interrupt();
+		return;
+	}
+
+	while (pending) {
+		unsigned bit = __ffs(pending);
+
+		irq = irq_find_mapping(rpc->irq_domain, bit);
+		generic_handle_irq(irq);
+
+		pending &= ~BIT(bit);
+	}
+}
+
+static void rt3883_pci_irq_unmask(struct irq_data *d)
+{
+	struct rt3883_pci_controller *rpc;
+	u32 t;
+
+	rpc = irq_data_get_irq_chip_data(d);
+
+	t = rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
+	rt3883_pci_w32(rpc, t | BIT(d->hwirq), RT3883_PCI_REG_PCIENA);
+	/* flush write */
+	rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
+}
+
+static void rt3883_pci_irq_mask(struct irq_data *d)
+{
+	struct rt3883_pci_controller *rpc;
+	u32 t;
+
+	rpc = irq_data_get_irq_chip_data(d);
+
+	t = rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
+	rt3883_pci_w32(rpc, t & ~BIT(d->hwirq), RT3883_PCI_REG_PCIENA);
+	/* flush write */
+	rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA);
+}
+
+static struct irq_chip rt3883_pci_irq_chip = {
+	.name		= "RT3883 PCI",
+	.irq_mask	= rt3883_pci_irq_mask,
+	.irq_unmask	= rt3883_pci_irq_unmask,
+	.irq_mask_ack	= rt3883_pci_irq_mask,
+};
+
+static int rt3883_pci_irq_map(struct irq_domain *d, unsigned int irq,
+			      irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(irq, &rt3883_pci_irq_chip, handle_level_irq);
+	irq_set_chip_data(irq, d->host_data);
+
+	return 0;
+}
+
+static const struct irq_domain_ops rt3883_pci_irq_domain_ops = {
+	.map = rt3883_pci_irq_map,
+	.xlate = irq_domain_xlate_onecell,
+};
+
+static int rt3883_pci_irq_init(struct device *dev,
+			       struct rt3883_pci_controller *rpc)
+{
+	int irq;
+
+	irq = irq_of_parse_and_map(rpc->intc_of_node, 0);
+	if (irq == 0) {
+		dev_err(dev, "%s has no IRQ",
+			of_node_full_name(rpc->intc_of_node));
+		return -EINVAL;
+	}
+
+	/* disable all interrupts */
+	rt3883_pci_w32(rpc, 0, RT3883_PCI_REG_PCIENA);
+
+	rpc->irq_domain =
+		irq_domain_add_linear(rpc->intc_of_node, RT3883_PCI_IRQ_COUNT,
+				      &rt3883_pci_irq_domain_ops,
+				      rpc);
+	if (!rpc->irq_domain) {
+		dev_err(dev, "unable to add IRQ domain\n");
+		return -ENODEV;
+	}
+
+	irq_set_handler_data(irq, rpc);
+	irq_set_chained_handler(irq, rt3883_pci_irq_handler);
+
+	return 0;
+}
+
+static int rt3883_pci_config_read(struct pci_bus *bus, unsigned int devfn,
+				  int where, int size, u32 *val)
+{
+	struct rt3883_pci_controller *rpc;
+	unsigned long flags;
+	u32 address;
+	u32 data;
+
+	rpc = pci_bus_to_rt3883_controller(bus);
+
+	if (!rpc->pcie_ready && bus->number == 1)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
+					 PCI_FUNC(devfn), where);
+
+	spin_lock_irqsave(&rpc->lock, flags);
+	rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
+	data = rt3883_pci_r32(rpc, RT3883_PCI_REG_CFGDATA);
+	spin_unlock_irqrestore(&rpc->lock, flags);
+
+	switch (size) {
+	case 1:
+		*val = (data >> ((where & 3) << 3)) & 0xff;
+		break;
+	case 2:
+		*val = (data >> ((where & 3) << 3)) & 0xffff;
+		break;
+	case 4:
+		*val = data;
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int rt3883_pci_config_write(struct pci_bus *bus, unsigned int devfn,
+				   int where, int size, u32 val)
+{
+	struct rt3883_pci_controller *rpc;
+	unsigned long flags;
+	u32 address;
+	u32 data;
+
+	rpc = pci_bus_to_rt3883_controller(bus);
+
+	if (!rpc->pcie_ready && bus->number == 1)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
+					 PCI_FUNC(devfn), where);
+
+	spin_lock_irqsave(&rpc->lock, flags);
+	rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR);
+	data = rt3883_pci_r32(rpc, RT3883_PCI_REG_CFGDATA);
+
+	switch (size) {
+	case 1:
+		data = (data & ~(0xff << ((where & 3) << 3))) |
+		       (val << ((where & 3) << 3));
+		break;
+	case 2:
+		data = (data & ~(0xffff << ((where & 3) << 3))) |
+		       (val << ((where & 3) << 3));
+		break;
+	case 4:
+		data = val;
+		break;
+	}
+
+	rt3883_pci_w32(rpc, data, RT3883_PCI_REG_CFGDATA);
+	spin_unlock_irqrestore(&rpc->lock, flags);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops rt3883_pci_ops = {
+	.read	= rt3883_pci_config_read,
+	.write	= rt3883_pci_config_write,
+};
+
+static void rt3883_pci_preinit(struct rt3883_pci_controller *rpc, unsigned mode)
+{
+	u32 syscfg1;
+	u32 rstctrl;
+	u32 clkcfg1;
+	u32 t;
+
+	rstctrl = rt_sysc_r32(RT3883_SYSC_REG_RSTCTRL);
+	syscfg1 = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG1);
+	clkcfg1 = rt_sysc_r32(RT3883_SYSC_REG_CLKCFG1);
+
+	if (mode & RT3883_PCI_MODE_PCIE) {
+		rstctrl |= RT3883_RSTCTRL_PCIE;
+		rt_sysc_w32(rstctrl, RT3883_SYSC_REG_RSTCTRL);
+
+		/* setup PCI PAD drive mode */
+		syscfg1 &= ~(0x30);
+		syscfg1 |= (2 << 4);
+		rt_sysc_w32(syscfg1, RT3883_SYSC_REG_SYSCFG1);
+
+		t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN0);
+		t &= ~BIT(31);
+		rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN0);
+
+		t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN1);
+		t &= 0x80ffffff;
+		rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN1);
+
+		t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN1);
+		t |= 0xa << 24;
+		rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN1);
+
+		t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN0);
+		t |= BIT(31);
+		rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN0);
+
+		msleep(50);
+
+		rstctrl &= ~RT3883_RSTCTRL_PCIE;
+		rt_sysc_w32(rstctrl, RT3883_SYSC_REG_RSTCTRL);
+	}
+
+	syscfg1 |= (RT3883_SYSCFG1_PCIE_RC_MODE | RT3883_SYSCFG1_PCI_HOST_MODE);
+
+	clkcfg1 &= ~(RT3883_CLKCFG1_PCI_CLK_EN | RT3883_CLKCFG1_PCIE_CLK_EN);
+
+	if (mode & RT3883_PCI_MODE_PCI) {
+		clkcfg1 |= RT3883_CLKCFG1_PCI_CLK_EN;
+		rstctrl &= ~RT3883_RSTCTRL_PCI;
+	}
+
+	if (mode & RT3883_PCI_MODE_PCIE) {
+		clkcfg1 |= RT3883_CLKCFG1_PCIE_CLK_EN;
+		rstctrl &= ~RT3883_RSTCTRL_PCIE;
+	}
+
+	rt_sysc_w32(syscfg1, RT3883_SYSC_REG_SYSCFG1);
+	rt_sysc_w32(rstctrl, RT3883_SYSC_REG_RSTCTRL);
+	rt_sysc_w32(clkcfg1, RT3883_SYSC_REG_CLKCFG1);
+
+	msleep(500);
+
+	/*
+	 * setup the device number of the P2P bridge
+	 * and de-assert the reset line
+	 */
+	t = (RT3883_P2P_BR_DEVNUM << RT3883_PCICFG_P2P_BR_DEVNUM_S);
+	rt3883_pci_w32(rpc, t, RT3883_PCI_REG_PCICFG);
+
+	/* flush write */
+	rt3883_pci_r32(rpc, RT3883_PCI_REG_PCICFG);
+	msleep(500);
+
+	if (mode & RT3883_PCI_MODE_PCIE) {
+		msleep(500);
+
+		t = rt3883_pci_r32(rpc, RT3883_PCI_REG_STATUS(1));
+
+		rpc->pcie_ready = t & BIT(0);
+
+		if (!rpc->pcie_ready) {
+			/* reset the PCIe block */
+			t = rt_sysc_r32(RT3883_SYSC_REG_RSTCTRL);
+			t |= RT3883_RSTCTRL_PCIE;
+			rt_sysc_w32(t, RT3883_SYSC_REG_RSTCTRL);
+			t &= ~RT3883_RSTCTRL_PCIE;
+			rt_sysc_w32(t, RT3883_SYSC_REG_RSTCTRL);
+
+			/* turn off PCIe clock */
+			t = rt_sysc_r32(RT3883_SYSC_REG_CLKCFG1);
+			t &= ~RT3883_CLKCFG1_PCIE_CLK_EN;
+			rt_sysc_w32(t, RT3883_SYSC_REG_CLKCFG1);
+
+			t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN0);
+			t &= ~0xf000c080;
+			rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN0);
+		}
+	}
+
+	/* enable PCI arbiter */
+	rt3883_pci_w32(rpc, 0x79, RT3883_PCI_REG_ARBCTL);
+}
+
+static int rt3883_pci_probe(struct platform_device *pdev)
+{
+	struct rt3883_pci_controller *rpc;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct resource *res;
+	struct device_node *child;
+	u32 val;
+	int err;
+	int mode;
+
+	rpc = devm_kzalloc(dev, sizeof(*rpc), GFP_KERNEL);
+	if (!rpc)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -EINVAL;
+
+	rpc->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(rpc->base))
+		return PTR_ERR(rpc->base);
+
+	/* find the interrupt controller child node */
+	for_each_child_of_node(np, child) {
+		if (of_get_property(child, "interrupt-controller", NULL) &&
+		    of_node_get(child)) {
+			rpc->intc_of_node = child;
+			break;
+		}
+	}
+
+	if (!rpc->intc_of_node) {
+		dev_err(dev, "%s has no %s child node",
+			of_node_full_name(rpc->intc_of_node),
+			"interrupt controller");
+		return -EINVAL;
+	}
+
+	/* find the PCI host bridge child node */
+	for_each_child_of_node(np, child) {
+		if (child->type &&
+		    of_node_cmp(child->type, "pci") == 0 &&
+		    of_node_get(child)) {
+			rpc->pci_controller.of_node = child;
+			break;
+		}
+	}
+
+	if (!rpc->pci_controller.of_node) {
+		dev_err(dev, "%s has no %s child node",
+			of_node_full_name(rpc->intc_of_node),
+			"PCI host bridge");
+		err = -EINVAL;
+		goto err_put_intc_node;
+	}
+
+	mode = RT3883_PCI_MODE_NONE;
+	for_each_available_child_of_node(rpc->pci_controller.of_node, child) {
+		int devfn;
+
+		if (!child->type ||
+		    of_node_cmp(child->type, "pci") != 0)
+			continue;
+
+		devfn = of_pci_get_devfn(child);
+		if (devfn < 0)
+			continue;
+
+		switch (PCI_SLOT(devfn)) {
+		case 1:
+			mode |= RT3883_PCI_MODE_PCIE;
+			break;
+
+		case 17:
+		case 18:
+			mode |= RT3883_PCI_MODE_PCI;
+			break;
+		}
+	}
+
+	if (mode == RT3883_PCI_MODE_NONE) {
+		dev_err(dev, "unable to determine PCI mode\n");
+		err = -EINVAL;
+		goto err_put_hb_node;
+	}
+
+	dev_info(dev, "mode:%s%s\n",
+		 (mode & RT3883_PCI_MODE_PCI) ? " PCI" : "",
+		 (mode & RT3883_PCI_MODE_PCIE) ? " PCIe" : "");
+
+	rt3883_pci_preinit(rpc, mode);
+
+	rpc->pci_controller.pci_ops = &rt3883_pci_ops;
+	rpc->pci_controller.io_resource = &rpc->io_res;
+	rpc->pci_controller.mem_resource = &rpc->mem_res;
+
+	/* Load PCI I/O and memory resources from DT */
+	pci_load_of_ranges(&rpc->pci_controller,
+			   rpc->pci_controller.of_node);
+
+	rt3883_pci_w32(rpc, rpc->mem_res.start, RT3883_PCI_REG_MEMBASE);
+	rt3883_pci_w32(rpc, rpc->io_res.start, RT3883_PCI_REG_IOBASE);
+
+	ioport_resource.start = rpc->io_res.start;
+	ioport_resource.end = rpc->io_res.end;
+
+	/* PCI */
+	rt3883_pci_w32(rpc, 0x03ff0000, RT3883_PCI_REG_BAR0SETUP(0));
+	rt3883_pci_w32(rpc, RT3883_MEMORY_BASE, RT3883_PCI_REG_IMBASEBAR0(0));
+	rt3883_pci_w32(rpc, 0x08021814, RT3883_PCI_REG_ID(0));
+	rt3883_pci_w32(rpc, 0x00800001, RT3883_PCI_REG_CLASS(0));
+	rt3883_pci_w32(rpc, 0x28801814, RT3883_PCI_REG_SUBID(0));
+
+	/* PCIe */
+	rt3883_pci_w32(rpc, 0x03ff0000, RT3883_PCI_REG_BAR0SETUP(1));
+	rt3883_pci_w32(rpc, RT3883_MEMORY_BASE, RT3883_PCI_REG_IMBASEBAR0(1));
+	rt3883_pci_w32(rpc, 0x08021814, RT3883_PCI_REG_ID(1));
+	rt3883_pci_w32(rpc, 0x06040001, RT3883_PCI_REG_CLASS(1));
+	rt3883_pci_w32(rpc, 0x28801814, RT3883_PCI_REG_SUBID(1));
+
+	err = rt3883_pci_irq_init(dev, rpc);
+	if (err)
+		goto err_put_hb_node;
+
+	/* PCIe */
+	val = rt3883_pci_read_cfg32(rpc, 0, 0x01, 0, PCI_COMMAND);
+	val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+	rt3883_pci_write_cfg32(rpc, 0, 0x01, 0, PCI_COMMAND, val);
+
+	/* PCI */
+	val = rt3883_pci_read_cfg32(rpc, 0, 0x00, 0, PCI_COMMAND);
+	val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+	rt3883_pci_write_cfg32(rpc, 0, 0x00, 0, PCI_COMMAND, val);
+
+	if (mode == RT3883_PCI_MODE_PCIE) {
+		rt3883_pci_w32(rpc, 0x03ff0001, RT3883_PCI_REG_BAR0SETUP(0));
+		rt3883_pci_w32(rpc, 0x03ff0001, RT3883_PCI_REG_BAR0SETUP(1));
+
+		rt3883_pci_write_cfg32(rpc, 0, RT3883_P2P_BR_DEVNUM, 0,
+				       PCI_BASE_ADDRESS_0,
+				       RT3883_MEMORY_BASE);
+		/* flush write */
+		rt3883_pci_read_cfg32(rpc, 0, RT3883_P2P_BR_DEVNUM, 0,
+				      PCI_BASE_ADDRESS_0);
+	} else {
+		rt3883_pci_write_cfg32(rpc, 0, RT3883_P2P_BR_DEVNUM, 0,
+				       PCI_IO_BASE, 0x00000101);
+	}
+
+	register_pci_controller(&rpc->pci_controller);
+
+	return 0;
+
+err_put_hb_node:
+	of_node_put(rpc->pci_controller.of_node);
+err_put_intc_node:
+	of_node_put(rpc->intc_of_node);
+	return err;
+}
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	struct of_irq dev_irq;
+	int err;
+	int irq;
+
+	err = of_irq_map_pci(dev, &dev_irq);
+	if (err) {
+		pr_err("pci %s: unable to get irq map, err=%d\n",
+		       pci_name((struct pci_dev *) dev), err);
+		return 0;
+	}
+
+	irq = irq_create_of_mapping(dev_irq.controller,
+				    dev_irq.specifier,
+				    dev_irq.size);
+
+	if (irq == 0)
+		pr_crit("pci %s: no irq found for pin %u\n",
+			pci_name((struct pci_dev *) dev), pin);
+	else
+		pr_info("pci %s: using irq %d for pin %u\n",
+			pci_name((struct pci_dev *) dev), irq, pin);
+
+	return irq;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
+
+static const struct of_device_id rt3883_pci_ids[] = {
+	{ .compatible = "ralink,rt3883-pci" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, rt3883_pci_ids);
+
+static struct platform_driver rt3883_pci_driver = {
+	.probe = rt3883_pci_probe,
+	.driver = {
+		.name = "rt3883-pci",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(rt3883_pci_ids),
+	},
+};
+
+static int __init rt3883_pci_init(void)
+{
+	return platform_driver_register(&rt3883_pci_driver);
+}
+
+postcore_initcall(rt3883_pci_init);
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 594e60d..1bf60b1 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -113,7 +113,6 @@ static void pcibios_scanbus(struct pci_controller *hose)
 		if (!pci_has_flag(PCI_PROBE_ONLY)) {
 			pci_bus_size_bridges(bus);
 			pci_bus_assign_resources(bus);
-			pci_enable_bridges(bus);
 		}
 	}
 }
@@ -121,51 +120,37 @@ static void pcibios_scanbus(struct pci_controller *hose)
 #ifdef CONFIG_OF
 void pci_load_of_ranges(struct pci_controller *hose, struct device_node *node)
 {
-	const __be32 *ranges;
-	int rlen;
-	int pna = of_n_addr_cells(node);
-	int np = pna + 5;
+	struct of_pci_range range;
+	struct of_pci_range_parser parser;
 
 	pr_info("PCI host bridge %s ranges:\n", node->full_name);
-	ranges = of_get_property(node, "ranges", &rlen);
-	if (ranges == NULL)
-		return;
 	hose->of_node = node;
 
-	while ((rlen -= np * 4) >= 0) {
-		u32 pci_space;
+	if (of_pci_range_parser_init(&parser, node))
+		return;
+
+	for_each_of_pci_range(&parser, &range) {
 		struct resource *res = NULL;
-		u64 addr, size;
-
-		pci_space = be32_to_cpup(&ranges[0]);
-		addr = of_translate_address(node, ranges + 3);
-		size = of_read_number(ranges + pna + 3, 2);
-		ranges += np;
-		switch ((pci_space >> 24) & 0x3) {
-		case 1:		/* PCI IO space */
+
+		switch (range.flags & IORESOURCE_TYPE_BITS) {
+		case IORESOURCE_IO:
 			pr_info("  IO 0x%016llx..0x%016llx\n",
-					addr, addr + size - 1);
+				range.cpu_addr,
+				range.cpu_addr + range.size - 1);
 			hose->io_map_base =
-				(unsigned long)ioremap(addr, size);
+				(unsigned long)ioremap(range.cpu_addr,
+						       range.size);
 			res = hose->io_resource;
-			res->flags = IORESOURCE_IO;
 			break;
-		case 2:		/* PCI Memory space */
-		case 3:		/* PCI 64 bits Memory space */
+		case IORESOURCE_MEM:
 			pr_info(" MEM 0x%016llx..0x%016llx\n",
-					addr, addr + size - 1);
+				range.cpu_addr,
+				range.cpu_addr + range.size - 1);
 			res = hose->mem_resource;
-			res->flags = IORESOURCE_MEM;
 			break;
 		}
-		if (res != NULL) {
-			res->start = addr;
-			res->name = node->full_name;
-			res->end = res->start + size - 1;
-			res->parent = NULL;
-			res->sibling = NULL;
-			res->child = NULL;
-		}
+		if (res != NULL)
+			of_pci_range_to_resource(&range, node, res);
 	}
 }
 
diff --git a/arch/mips/powertv/Kconfig b/arch/mips/powertv/Kconfig
deleted file mode 100644
index 1a1b03e..0000000
--- a/arch/mips/powertv/Kconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-config BOOTLOADER_DRIVER
-	bool "PowerTV Bootloader Driver Support"
-	default n
-	depends on POWERTV
-	help
-	  Use this option if you want to load bootloader driver.
-
-config BOOTLOADER_FAMILY
-	string "POWERTV Bootloader Family string"
-	default "85"
-	depends on POWERTV && !BOOTLOADER_DRIVER
-	help
-	  This value should be specified when the bootloader driver is disabled
-	  and must be exactly two characters long. Families supported are:
-	    R1 - RNG-100  R2 - RNG-200
-	    A1 - Class A  B1 - Class B
-	    E1 - Class E  F1 - Class F
-	    44 - 45xx     46 - 46xx
-	    85 - 85xx     86 - 86xx
diff --git a/arch/mips/powertv/Makefile b/arch/mips/powertv/Makefile
deleted file mode 100644
index 39ca9f8..0000000
--- a/arch/mips/powertv/Makefile
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# Carsten Langgaard, carstenl@mips.com
-# Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
-#
-# Carsten Langgaard, carstenl@mips.com
-# Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
-# Portions copyright (C)  2009 Cisco Systems, Inc.
-#
-# This program is free software; you can distribute it and/or modify it
-# under the terms of the GNU General Public License (Version 2) as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-#
-# Makefile for the Cisco PowerTV-specific kernel interface routines
-# under Linux.
-#
-
-obj-y += init.o ioremap.o memory.o powertv_setup.o reset.o time.o \
-	asic/ pci/
-
-obj-$(CONFIG_USB) += powertv-usb.o
diff --git a/arch/mips/powertv/Platform b/arch/mips/powertv/Platform
deleted file mode 100644
index 4eb5af1..0000000
--- a/arch/mips/powertv/Platform
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Cisco PowerTV Platform
-#
-platform-$(CONFIG_POWERTV)	+= powertv/
-cflags-$(CONFIG_POWERTV)	+=					\
-		-I$(srctree)/arch/mips/include/asm/mach-powertv
-load-$(CONFIG_POWERTV)		+= 0xffffffff90800000
diff --git a/arch/mips/powertv/asic/Makefile b/arch/mips/powertv/asic/Makefile
deleted file mode 100644
index 35dcc53..0000000
--- a/arch/mips/powertv/asic/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# Copyright (C) 2009  Scientific-Atlanta, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-#
-
-obj-y += asic-calliope.o asic-cronus.o asic-gaia.o asic-zeus.o \
-	asic_devices.o asic_int.o irq_asic.o prealloc-calliope.o \
-	prealloc-cronus.o prealloc-cronuslite.o prealloc-gaia.o prealloc-zeus.o
diff --git a/arch/mips/powertv/asic/asic-calliope.c b/arch/mips/powertv/asic/asic-calliope.c
deleted file mode 100644
index 2f539b4..0000000
--- a/arch/mips/powertv/asic/asic-calliope.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Locations of devices in the Calliope ASIC.
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * Author:	 Ken Eppinett
- *		 David Schleef <ds@schleef.org>
- *
- * Description:	 Defines the platform resources for the SA settop.
- */
-
-#include <linux/init.h>
-#include <asm/mach-powertv/asic.h>
-
-#define CALLIOPE_ADDR(x)	(CALLIOPE_IO_BASE + (x))
-
-const struct register_map calliope_register_map __initconst = {
-	.eic_slow0_strt_add = {.phys = CALLIOPE_ADDR(0x800000)},
-	.eic_cfg_bits = {.phys = CALLIOPE_ADDR(0x800038)},
-	.eic_ready_status = {.phys = CALLIOPE_ADDR(0x80004c)},
-
-	.chipver3 = {.phys = CALLIOPE_ADDR(0xA00800)},
-	.chipver2 = {.phys = CALLIOPE_ADDR(0xA00804)},
-	.chipver1 = {.phys = CALLIOPE_ADDR(0xA00808)},
-	.chipver0 = {.phys = CALLIOPE_ADDR(0xA0080c)},
-
-	/* The registers of IRBlaster */
-	.uart1_intstat = {.phys = CALLIOPE_ADDR(0xA01800)},
-	.uart1_inten = {.phys = CALLIOPE_ADDR(0xA01804)},
-	.uart1_config1 = {.phys = CALLIOPE_ADDR(0xA01808)},
-	.uart1_config2 = {.phys = CALLIOPE_ADDR(0xA0180C)},
-	.uart1_divisorhi = {.phys = CALLIOPE_ADDR(0xA01810)},
-	.uart1_divisorlo = {.phys = CALLIOPE_ADDR(0xA01814)},
-	.uart1_data = {.phys = CALLIOPE_ADDR(0xA01818)},
-	.uart1_status = {.phys = CALLIOPE_ADDR(0xA0181C)},
-
-	.int_stat_3 = {.phys = CALLIOPE_ADDR(0xA02800)},
-	.int_stat_2 = {.phys = CALLIOPE_ADDR(0xA02804)},
-	.int_stat_1 = {.phys = CALLIOPE_ADDR(0xA02808)},
-	.int_stat_0 = {.phys = CALLIOPE_ADDR(0xA0280c)},
-	.int_config = {.phys = CALLIOPE_ADDR(0xA02810)},
-	.int_int_scan = {.phys = CALLIOPE_ADDR(0xA02818)},
-	.ien_int_3 = {.phys = CALLIOPE_ADDR(0xA02830)},
-	.ien_int_2 = {.phys = CALLIOPE_ADDR(0xA02834)},
-	.ien_int_1 = {.phys = CALLIOPE_ADDR(0xA02838)},
-	.ien_int_0 = {.phys = CALLIOPE_ADDR(0xA0283c)},
-	.int_level_3_3 = {.phys = CALLIOPE_ADDR(0xA02880)},
-	.int_level_3_2 = {.phys = CALLIOPE_ADDR(0xA02884)},
-	.int_level_3_1 = {.phys = CALLIOPE_ADDR(0xA02888)},
-	.int_level_3_0 = {.phys = CALLIOPE_ADDR(0xA0288c)},
-	.int_level_2_3 = {.phys = CALLIOPE_ADDR(0xA02890)},
-	.int_level_2_2 = {.phys = CALLIOPE_ADDR(0xA02894)},
-	.int_level_2_1 = {.phys = CALLIOPE_ADDR(0xA02898)},
-	.int_level_2_0 = {.phys = CALLIOPE_ADDR(0xA0289c)},
-	.int_level_1_3 = {.phys = CALLIOPE_ADDR(0xA028a0)},
-	.int_level_1_2 = {.phys = CALLIOPE_ADDR(0xA028a4)},
-	.int_level_1_1 = {.phys = CALLIOPE_ADDR(0xA028a8)},
-	.int_level_1_0 = {.phys = CALLIOPE_ADDR(0xA028ac)},
-	.int_level_0_3 = {.phys = CALLIOPE_ADDR(0xA028b0)},
-	.int_level_0_2 = {.phys = CALLIOPE_ADDR(0xA028b4)},
-	.int_level_0_1 = {.phys = CALLIOPE_ADDR(0xA028b8)},
-	.int_level_0_0 = {.phys = CALLIOPE_ADDR(0xA028bc)},
-	.int_docsis_en = {.phys = CALLIOPE_ADDR(0xA028F4)},
-
-	.mips_pll_setup = {.phys = CALLIOPE_ADDR(0x980000)},
-	.fs432x4b4_usb_ctl = {.phys = CALLIOPE_ADDR(0x980030)},
-	.test_bus = {.phys = CALLIOPE_ADDR(0x9800CC)},
-	.crt_spare = {.phys = CALLIOPE_ADDR(0x9800d4)},
-	.usb2_ohci_int_mask = {.phys = CALLIOPE_ADDR(0x9A000c)},
-	.usb2_strap = {.phys = CALLIOPE_ADDR(0x9A0014)},
-	.ehci_hcapbase = {.phys = CALLIOPE_ADDR(0x9BFE00)},
-	.ohci_hc_revision = {.phys = CALLIOPE_ADDR(0x9BFC00)},
-	.bcm1_bs_lmi_steer = {.phys = CALLIOPE_ADDR(0x9E0004)},
-	.usb2_control = {.phys = CALLIOPE_ADDR(0x9E0054)},
-	.usb2_stbus_obc = {.phys = CALLIOPE_ADDR(0x9BFF00)},
-	.usb2_stbus_mess_size = {.phys = CALLIOPE_ADDR(0x9BFF04)},
-	.usb2_stbus_chunk_size = {.phys = CALLIOPE_ADDR(0x9BFF08)},
-
-	.pcie_regs = {.phys = 0x000000},	/* -doesn't exist- */
-	.tim_ch = {.phys = CALLIOPE_ADDR(0xA02C10)},
-	.tim_cl = {.phys = CALLIOPE_ADDR(0xA02C14)},
-	.gpio_dout = {.phys = CALLIOPE_ADDR(0xA02c20)},
-	.gpio_din = {.phys = CALLIOPE_ADDR(0xA02c24)},
-	.gpio_dir = {.phys = CALLIOPE_ADDR(0xA02c2C)},
-	.watchdog = {.phys = CALLIOPE_ADDR(0xA02c30)},
-	.front_panel = {.phys = 0x000000},	/* -not used- */
-};
diff --git a/arch/mips/powertv/asic/asic-cronus.c b/arch/mips/powertv/asic/asic-cronus.c
deleted file mode 100644
index 7f8f342..0000000
--- a/arch/mips/powertv/asic/asic-cronus.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Locations of devices in the Cronus ASIC
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * Author:	 Ken Eppinett
- *		 David Schleef <ds@schleef.org>
- *
- * Description:	 Defines the platform resources for the SA settop.
- */
-
-#include <linux/init.h>
-#include <asm/mach-powertv/asic.h>
-
-#define CRONUS_ADDR(x)	(CRONUS_IO_BASE + (x))
-
-const struct register_map cronus_register_map __initconst = {
-	.eic_slow0_strt_add = {.phys = CRONUS_ADDR(0x000000)},
-	.eic_cfg_bits = {.phys = CRONUS_ADDR(0x000038)},
-	.eic_ready_status = {.phys = CRONUS_ADDR(0x00004C)},
-
-	.chipver3 = {.phys = CRONUS_ADDR(0x2A0800)},
-	.chipver2 = {.phys = CRONUS_ADDR(0x2A0804)},
-	.chipver1 = {.phys = CRONUS_ADDR(0x2A0808)},
-	.chipver0 = {.phys = CRONUS_ADDR(0x2A080C)},
-
-	/* The registers of IRBlaster */
-	.uart1_intstat = {.phys = CRONUS_ADDR(0x2A1800)},
-	.uart1_inten = {.phys = CRONUS_ADDR(0x2A1804)},
-	.uart1_config1 = {.phys = CRONUS_ADDR(0x2A1808)},
-	.uart1_config2 = {.phys = CRONUS_ADDR(0x2A180C)},
-	.uart1_divisorhi = {.phys = CRONUS_ADDR(0x2A1810)},
-	.uart1_divisorlo = {.phys = CRONUS_ADDR(0x2A1814)},
-	.uart1_data = {.phys = CRONUS_ADDR(0x2A1818)},
-	.uart1_status = {.phys = CRONUS_ADDR(0x2A181C)},
-
-	.int_stat_3 = {.phys = CRONUS_ADDR(0x2A2800)},
-	.int_stat_2 = {.phys = CRONUS_ADDR(0x2A2804)},
-	.int_stat_1 = {.phys = CRONUS_ADDR(0x2A2808)},
-	.int_stat_0 = {.phys = CRONUS_ADDR(0x2A280C)},
-	.int_config = {.phys = CRONUS_ADDR(0x2A2810)},
-	.int_int_scan = {.phys = CRONUS_ADDR(0x2A2818)},
-	.ien_int_3 = {.phys = CRONUS_ADDR(0x2A2830)},
-	.ien_int_2 = {.phys = CRONUS_ADDR(0x2A2834)},
-	.ien_int_1 = {.phys = CRONUS_ADDR(0x2A2838)},
-	.ien_int_0 = {.phys = CRONUS_ADDR(0x2A283C)},
-	.int_level_3_3 = {.phys = CRONUS_ADDR(0x2A2880)},
-	.int_level_3_2 = {.phys = CRONUS_ADDR(0x2A2884)},
-	.int_level_3_1 = {.phys = CRONUS_ADDR(0x2A2888)},
-	.int_level_3_0 = {.phys = CRONUS_ADDR(0x2A288C)},
-	.int_level_2_3 = {.phys = CRONUS_ADDR(0x2A2890)},
-	.int_level_2_2 = {.phys = CRONUS_ADDR(0x2A2894)},
-	.int_level_2_1 = {.phys = CRONUS_ADDR(0x2A2898)},
-	.int_level_2_0 = {.phys = CRONUS_ADDR(0x2A289C)},
-	.int_level_1_3 = {.phys = CRONUS_ADDR(0x2A28A0)},
-	.int_level_1_2 = {.phys = CRONUS_ADDR(0x2A28A4)},
-	.int_level_1_1 = {.phys = CRONUS_ADDR(0x2A28A8)},
-	.int_level_1_0 = {.phys = CRONUS_ADDR(0x2A28AC)},
-	.int_level_0_3 = {.phys = CRONUS_ADDR(0x2A28B0)},
-	.int_level_0_2 = {.phys = CRONUS_ADDR(0x2A28B4)},
-	.int_level_0_1 = {.phys = CRONUS_ADDR(0x2A28B8)},
-	.int_level_0_0 = {.phys = CRONUS_ADDR(0x2A28BC)},
-	.int_docsis_en = {.phys = CRONUS_ADDR(0x2A28F4)},
-
-	.mips_pll_setup = {.phys = CRONUS_ADDR(0x1C0000)},
-	.fs432x4b4_usb_ctl = {.phys = CRONUS_ADDR(0x1C0028)},
-	.test_bus = {.phys = CRONUS_ADDR(0x1C00CC)},
-	.crt_spare = {.phys = CRONUS_ADDR(0x1c00d4)},
-	.usb2_ohci_int_mask = {.phys = CRONUS_ADDR(0x20000C)},
-	.usb2_strap = {.phys = CRONUS_ADDR(0x200014)},
-	.ehci_hcapbase = {.phys = CRONUS_ADDR(0x21FE00)},
-	.ohci_hc_revision = {.phys = CRONUS_ADDR(0x21fc00)},
-	.bcm1_bs_lmi_steer = {.phys = CRONUS_ADDR(0x2E0008)},
-	.usb2_control = {.phys = CRONUS_ADDR(0x2E004C)},
-	.usb2_stbus_obc = {.phys = CRONUS_ADDR(0x21FF00)},
-	.usb2_stbus_mess_size = {.phys = CRONUS_ADDR(0x21FF04)},
-	.usb2_stbus_chunk_size = {.phys = CRONUS_ADDR(0x21FF08)},
-
-	.pcie_regs = {.phys = CRONUS_ADDR(0x220000)},
-	.tim_ch = {.phys = CRONUS_ADDR(0x2A2C10)},
-	.tim_cl = {.phys = CRONUS_ADDR(0x2A2C14)},
-	.gpio_dout = {.phys = CRONUS_ADDR(0x2A2C20)},
-	.gpio_din = {.phys = CRONUS_ADDR(0x2A2C24)},
-	.gpio_dir = {.phys = CRONUS_ADDR(0x2A2C2C)},
-	.watchdog = {.phys = CRONUS_ADDR(0x2A2C30)},
-	.front_panel = {.phys = CRONUS_ADDR(0x2A3800)},
-};
diff --git a/arch/mips/powertv/asic/asic-gaia.c b/arch/mips/powertv/asic/asic-gaia.c
deleted file mode 100644
index 1265b49..0000000
--- a/arch/mips/powertv/asic/asic-gaia.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Locations of devices in the Gaia ASIC
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * Author:	 David VomLehn
- */
-
-#include <linux/init.h>
-#include <asm/mach-powertv/asic.h>
-
-const struct register_map gaia_register_map __initconst = {
-	.eic_slow0_strt_add = {.phys = GAIA_IO_BASE + 0x000000},
-	.eic_cfg_bits = {.phys = GAIA_IO_BASE + 0x000038},
-	.eic_ready_status = {.phys = GAIA_IO_BASE + 0x00004C},
-
-	.chipver3 = {.phys = GAIA_IO_BASE + 0x2A0800},
-	.chipver2 = {.phys = GAIA_IO_BASE + 0x2A0804},
-	.chipver1 = {.phys = GAIA_IO_BASE + 0x2A0808},
-	.chipver0 = {.phys = GAIA_IO_BASE + 0x2A080C},
-
-	/* The registers of IRBlaster */
-	.uart1_intstat = {.phys = GAIA_IO_BASE + 0x2A1800},
-	.uart1_inten = {.phys = GAIA_IO_BASE + 0x2A1804},
-	.uart1_config1 = {.phys = GAIA_IO_BASE + 0x2A1808},
-	.uart1_config2 = {.phys = GAIA_IO_BASE + 0x2A180C},
-	.uart1_divisorhi = {.phys = GAIA_IO_BASE + 0x2A1810},
-	.uart1_divisorlo = {.phys = GAIA_IO_BASE + 0x2A1814},
-	.uart1_data = {.phys = GAIA_IO_BASE + 0x2A1818},
-	.uart1_status = {.phys = GAIA_IO_BASE + 0x2A181C},
-
-	.int_stat_3 = {.phys = GAIA_IO_BASE + 0x2A2800},
-	.int_stat_2 = {.phys = GAIA_IO_BASE + 0x2A2804},
-	.int_stat_1 = {.phys = GAIA_IO_BASE + 0x2A2808},
-	.int_stat_0 = {.phys = GAIA_IO_BASE + 0x2A280C},
-	.int_config = {.phys = GAIA_IO_BASE + 0x2A2810},
-	.int_int_scan = {.phys = GAIA_IO_BASE + 0x2A2818},
-	.ien_int_3 = {.phys = GAIA_IO_BASE + 0x2A2830},
-	.ien_int_2 = {.phys = GAIA_IO_BASE + 0x2A2834},
-	.ien_int_1 = {.phys = GAIA_IO_BASE + 0x2A2838},
-	.ien_int_0 = {.phys = GAIA_IO_BASE + 0x2A283C},
-	.int_level_3_3 = {.phys = GAIA_IO_BASE + 0x2A2880},
-	.int_level_3_2 = {.phys = GAIA_IO_BASE + 0x2A2884},
-	.int_level_3_1 = {.phys = GAIA_IO_BASE + 0x2A2888},
-	.int_level_3_0 = {.phys = GAIA_IO_BASE + 0x2A288C},
-	.int_level_2_3 = {.phys = GAIA_IO_BASE + 0x2A2890},
-	.int_level_2_2 = {.phys = GAIA_IO_BASE + 0x2A2894},
-	.int_level_2_1 = {.phys = GAIA_IO_BASE + 0x2A2898},
-	.int_level_2_0 = {.phys = GAIA_IO_BASE + 0x2A289C},
-	.int_level_1_3 = {.phys = GAIA_IO_BASE + 0x2A28A0},
-	.int_level_1_2 = {.phys = GAIA_IO_BASE + 0x2A28A4},
-	.int_level_1_1 = {.phys = GAIA_IO_BASE + 0x2A28A8},
-	.int_level_1_0 = {.phys = GAIA_IO_BASE + 0x2A28AC},
-	.int_level_0_3 = {.phys = GAIA_IO_BASE + 0x2A28B0},
-	.int_level_0_2 = {.phys = GAIA_IO_BASE + 0x2A28B4},
-	.int_level_0_1 = {.phys = GAIA_IO_BASE + 0x2A28B8},
-	.int_level_0_0 = {.phys = GAIA_IO_BASE + 0x2A28BC},
-	.int_docsis_en = {.phys = GAIA_IO_BASE + 0x2A28F4},
-
-	.mips_pll_setup = {.phys = GAIA_IO_BASE + 0x1C0000},
-	.fs432x4b4_usb_ctl = {.phys = GAIA_IO_BASE + 0x1C0024},
-	.test_bus = {.phys = GAIA_IO_BASE + 0x1C00CC},
-	.crt_spare = {.phys = GAIA_IO_BASE + 0x1c0108},
-	.usb2_ohci_int_mask = {.phys = GAIA_IO_BASE + 0x20000C},
-	.usb2_strap = {.phys = GAIA_IO_BASE + 0x200014},
-	.ehci_hcapbase = {.phys = GAIA_IO_BASE + 0x21FE00},
-	.ohci_hc_revision = {.phys = GAIA_IO_BASE + 0x21fc00},
-	.bcm1_bs_lmi_steer = {.phys = GAIA_IO_BASE + 0x2E0004},
-	.usb2_control = {.phys = GAIA_IO_BASE + 0x2E004C},
-	.usb2_stbus_obc = {.phys = GAIA_IO_BASE + 0x21FF00},
-	.usb2_stbus_mess_size = {.phys = GAIA_IO_BASE + 0x21FF04},
-	.usb2_stbus_chunk_size = {.phys = GAIA_IO_BASE + 0x21FF08},
-
-	.pcie_regs = {.phys = GAIA_IO_BASE + 0x220000},
-	.tim_ch = {.phys = GAIA_IO_BASE + 0x2A2C10},
-	.tim_cl = {.phys = GAIA_IO_BASE + 0x2A2C14},
-	.gpio_dout = {.phys = GAIA_IO_BASE + 0x2A2C20},
-	.gpio_din = {.phys = GAIA_IO_BASE + 0x2A2C24},
-	.gpio_dir = {.phys = GAIA_IO_BASE + 0x2A2C2C},
-	.watchdog = {.phys = GAIA_IO_BASE + 0x2A2C30},
-	.front_panel = {.phys = GAIA_IO_BASE + 0x2A3800},
-};
diff --git a/arch/mips/powertv/asic/asic-zeus.c b/arch/mips/powertv/asic/asic-zeus.c
deleted file mode 100644
index 14e7de1..0000000
--- a/arch/mips/powertv/asic/asic-zeus.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Locations of devices in the Zeus ASIC
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * Author:	 Ken Eppinett
- *		 David Schleef <ds@schleef.org>
- *
- * Description:	 Defines the platform resources for the SA settop.
- */
-
-#include <linux/init.h>
-#include <asm/mach-powertv/asic.h>
-
-#define ZEUS_ADDR(x)	(ZEUS_IO_BASE + (x))
-
-const struct register_map zeus_register_map __initconst = {
-	.eic_slow0_strt_add = {.phys = ZEUS_ADDR(0x000000)},
-	.eic_cfg_bits = {.phys = ZEUS_ADDR(0x000038)},
-	.eic_ready_status = {.phys = ZEUS_ADDR(0x00004c)},
-
-	.chipver3 = {.phys = ZEUS_ADDR(0x280800)},
-	.chipver2 = {.phys = ZEUS_ADDR(0x280804)},
-	.chipver1 = {.phys = ZEUS_ADDR(0x280808)},
-	.chipver0 = {.phys = ZEUS_ADDR(0x28080c)},
-
-	/* The registers of IRBlaster */
-	.uart1_intstat = {.phys = ZEUS_ADDR(0x281800)},
-	.uart1_inten = {.phys = ZEUS_ADDR(0x281804)},
-	.uart1_config1 = {.phys = ZEUS_ADDR(0x281808)},
-	.uart1_config2 = {.phys = ZEUS_ADDR(0x28180C)},
-	.uart1_divisorhi = {.phys = ZEUS_ADDR(0x281810)},
-	.uart1_divisorlo = {.phys = ZEUS_ADDR(0x281814)},
-	.uart1_data = {.phys = ZEUS_ADDR(0x281818)},
-	.uart1_status = {.phys = ZEUS_ADDR(0x28181C)},
-
-	.int_stat_3 = {.phys = ZEUS_ADDR(0x282800)},
-	.int_stat_2 = {.phys = ZEUS_ADDR(0x282804)},
-	.int_stat_1 = {.phys = ZEUS_ADDR(0x282808)},
-	.int_stat_0 = {.phys = ZEUS_ADDR(0x28280c)},
-	.int_config = {.phys = ZEUS_ADDR(0x282810)},
-	.int_int_scan = {.phys = ZEUS_ADDR(0x282818)},
-	.ien_int_3 = {.phys = ZEUS_ADDR(0x282830)},
-	.ien_int_2 = {.phys = ZEUS_ADDR(0x282834)},
-	.ien_int_1 = {.phys = ZEUS_ADDR(0x282838)},
-	.ien_int_0 = {.phys = ZEUS_ADDR(0x28283c)},
-	.int_level_3_3 = {.phys = ZEUS_ADDR(0x282880)},
-	.int_level_3_2 = {.phys = ZEUS_ADDR(0x282884)},
-	.int_level_3_1 = {.phys = ZEUS_ADDR(0x282888)},
-	.int_level_3_0 = {.phys = ZEUS_ADDR(0x28288c)},
-	.int_level_2_3 = {.phys = ZEUS_ADDR(0x282890)},
-	.int_level_2_2 = {.phys = ZEUS_ADDR(0x282894)},
-	.int_level_2_1 = {.phys = ZEUS_ADDR(0x282898)},
-	.int_level_2_0 = {.phys = ZEUS_ADDR(0x28289c)},
-	.int_level_1_3 = {.phys = ZEUS_ADDR(0x2828a0)},
-	.int_level_1_2 = {.phys = ZEUS_ADDR(0x2828a4)},
-	.int_level_1_1 = {.phys = ZEUS_ADDR(0x2828a8)},
-	.int_level_1_0 = {.phys = ZEUS_ADDR(0x2828ac)},
-	.int_level_0_3 = {.phys = ZEUS_ADDR(0x2828b0)},
-	.int_level_0_2 = {.phys = ZEUS_ADDR(0x2828b4)},
-	.int_level_0_1 = {.phys = ZEUS_ADDR(0x2828b8)},
-	.int_level_0_0 = {.phys = ZEUS_ADDR(0x2828bc)},
-	.int_docsis_en = {.phys = ZEUS_ADDR(0x2828F4)},
-
-	.mips_pll_setup = {.phys = ZEUS_ADDR(0x1a0000)},
-	.fs432x4b4_usb_ctl = {.phys = ZEUS_ADDR(0x1a0018)},
-	.test_bus = {.phys = ZEUS_ADDR(0x1a0238)},
-	.crt_spare = {.phys = ZEUS_ADDR(0x1a0090)},
-	.usb2_ohci_int_mask = {.phys = ZEUS_ADDR(0x1e000c)},
-	.usb2_strap = {.phys = ZEUS_ADDR(0x1e0014)},
-	.ehci_hcapbase = {.phys = ZEUS_ADDR(0x1FFE00)},
-	.ohci_hc_revision = {.phys = ZEUS_ADDR(0x1FFC00)},
-	.bcm1_bs_lmi_steer = {.phys = ZEUS_ADDR(0x2C0008)},
-	.usb2_control = {.phys = ZEUS_ADDR(0x2c01a0)},
-	.usb2_stbus_obc = {.phys = ZEUS_ADDR(0x1FFF00)},
-	.usb2_stbus_mess_size = {.phys = ZEUS_ADDR(0x1FFF04)},
-	.usb2_stbus_chunk_size = {.phys = ZEUS_ADDR(0x1FFF08)},
-
-	.pcie_regs = {.phys = ZEUS_ADDR(0x200000)},
-	.tim_ch = {.phys = ZEUS_ADDR(0x282C10)},
-	.tim_cl = {.phys = ZEUS_ADDR(0x282C14)},
-	.gpio_dout = {.phys = ZEUS_ADDR(0x282c20)},
-	.gpio_din = {.phys = ZEUS_ADDR(0x282c24)},
-	.gpio_dir = {.phys = ZEUS_ADDR(0x282c2C)},
-	.watchdog = {.phys = ZEUS_ADDR(0x282c30)},
-	.front_panel = {.phys = ZEUS_ADDR(0x283800)},
-};
diff --git a/arch/mips/powertv/asic/asic_devices.c b/arch/mips/powertv/asic/asic_devices.c
deleted file mode 100644
index 0238af1..0000000
--- a/arch/mips/powertv/asic/asic_devices.c
+++ /dev/null
@@ -1,559 +0,0 @@
-/*
- *
- * Description:	 Defines the platform resources for Gaia-based settops.
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * NOTE: The bootloader allocates persistent memory at an address which is
- * 16 MiB below the end of the highest address in KSEG0. All fixed
- * address memory reservations must avoid this region.
- */
-
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/resource.h>
-#include <linux/serial_reg.h>
-#include <linux/io.h>
-#include <linux/bootmem.h>
-#include <linux/mm.h>
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <asm/page.h>
-#include <linux/swap.h>
-#include <linux/highmem.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/mach-powertv/asic.h>
-#include <asm/mach-powertv/asic_regs.h>
-#include <asm/mach-powertv/interrupts.h>
-
-#ifdef CONFIG_BOOTLOADER_DRIVER
-#include <asm/mach-powertv/kbldr.h>
-#endif
-#include <asm/bootinfo.h>
-
-#define BOOTLDRFAMILY(byte1, byte0) (((byte1) << 8) | (byte0))
-
-/*
- * Forward Prototypes
- */
-static void pmem_setup_resource(void);
-
-/*
- * Global Variables
- */
-enum asic_type asic;
-
-unsigned int platform_features;
-unsigned int platform_family;
-struct register_map _asic_register_map;
-EXPORT_SYMBOL(_asic_register_map);		/* Exported for testing */
-unsigned long asic_phy_base;
-unsigned long asic_base;
-EXPORT_SYMBOL(asic_base);			/* Exported for testing */
-struct resource *gp_resources;
-
-/*
- * Don't recommend to use it directly, it is usually used by kernel internally.
- * Portable code should be using interfaces such as ioremp, dma_map_single, etc.
- */
-unsigned long phys_to_dma_offset;
-EXPORT_SYMBOL(phys_to_dma_offset);
-
-/*
- *
- * IO Resource Definition
- *
- */
-
-struct resource asic_resource = {
-	.name  = "ASIC Resource",
-	.start = 0,
-	.end   = ASIC_IO_SIZE,
-	.flags = IORESOURCE_MEM,
-};
-
-/*
- * Allow override of bootloader-specified model
- * Returns zero on success, a negative errno value on failure.	This parameter
- * allows overriding of the bootloader-specified model.
- */
-static char __initdata cmdline[COMMAND_LINE_SIZE];
-
-#define FORCEFAMILY_PARAM	"forcefamily"
-
-/*
- * check_forcefamily - check for, and parse, forcefamily command line parameter
- * @forced_family:	Pointer to two-character array in which to store the
- *			value of the forcedfamily parameter, if any.
- */
-static __init int check_forcefamily(unsigned char forced_family[2])
-{
-	const char *p;
-
-	forced_family[0] = '\0';
-	forced_family[1] = '\0';
-
-	/* Check the command line for a forcefamily directive */
-	strncpy(cmdline, arcs_cmdline, COMMAND_LINE_SIZE - 1);
-	p = strstr(cmdline, FORCEFAMILY_PARAM);
-	if (p && (p != cmdline) && (*(p - 1) != ' '))
-		p = strstr(p, " " FORCEFAMILY_PARAM "=");
-
-	if (p) {
-		p += strlen(FORCEFAMILY_PARAM "=");
-
-		if (*p == '\0' || *(p + 1) == '\0' ||
-			(*(p + 2) != '\0' && *(p + 2) != ' '))
-			pr_err(FORCEFAMILY_PARAM " must be exactly two "
-				"characters long, ignoring value\n");
-
-		else {
-			forced_family[0] = *p;
-			forced_family[1] = *(p + 1);
-		}
-	}
-
-	return 0;
-}
-
-/*
- * platform_set_family - determine major platform family type.
- *
- * Returns family type; -1 if none
- * Returns the family type; -1 if none
- *
- */
-static __init noinline void platform_set_family(void)
-{
-	unsigned char forced_family[2];
-	unsigned short bootldr_family;
-
-	if (check_forcefamily(forced_family) == 0)
-		bootldr_family = BOOTLDRFAMILY(forced_family[0],
-			forced_family[1]);
-	else {
-
-#ifdef CONFIG_BOOTLOADER_DRIVER
-		bootldr_family = (unsigned short) kbldr_GetSWFamily();
-#else
-#if defined(CONFIG_BOOTLOADER_FAMILY)
-		bootldr_family = (unsigned short) BOOTLDRFAMILY(
-			CONFIG_BOOTLOADER_FAMILY[0],
-			CONFIG_BOOTLOADER_FAMILY[1]);
-#else
-#error "Unknown Bootloader Family"
-#endif
-#endif
-	}
-
-	pr_info("Bootloader Family = 0x%04X\n", bootldr_family);
-
-	switch (bootldr_family) {
-	case BOOTLDRFAMILY('R', '1'):
-		platform_family = FAMILY_1500;
-		break;
-	case BOOTLDRFAMILY('4', '4'):
-		platform_family = FAMILY_4500;
-		break;
-	case BOOTLDRFAMILY('4', '6'):
-		platform_family = FAMILY_4600;
-		break;
-	case BOOTLDRFAMILY('A', '1'):
-		platform_family = FAMILY_4600VZA;
-		break;
-	case BOOTLDRFAMILY('8', '5'):
-		platform_family = FAMILY_8500;
-		break;
-	case BOOTLDRFAMILY('R', '2'):
-		platform_family = FAMILY_8500RNG;
-		break;
-	case BOOTLDRFAMILY('8', '6'):
-		platform_family = FAMILY_8600;
-		break;
-	case BOOTLDRFAMILY('B', '1'):
-		platform_family = FAMILY_8600VZB;
-		break;
-	case BOOTLDRFAMILY('E', '1'):
-		platform_family = FAMILY_1500VZE;
-		break;
-	case BOOTLDRFAMILY('F', '1'):
-		platform_family = FAMILY_1500VZF;
-		break;
-	case BOOTLDRFAMILY('8', '7'):
-		platform_family = FAMILY_8700;
-		break;
-	default:
-		platform_family = -1;
-	}
-}
-
-unsigned int platform_get_family(void)
-{
-	return platform_family;
-}
-EXPORT_SYMBOL(platform_get_family);
-
-/*
- * platform_get_asic - determine the ASIC type.
- *
- * Returns the ASIC type, or ASIC_UNKNOWN if unknown
- *
- */
-enum asic_type platform_get_asic(void)
-{
-	return asic;
-}
-EXPORT_SYMBOL(platform_get_asic);
-
-/*
- * set_register_map - set ASIC register configuration
- * @phys_base:	Physical address of the base of the ASIC registers
- * @map:	Description of key ASIC registers
- */
-static void __init set_register_map(unsigned long phys_base,
-	const struct register_map *map)
-{
-	asic_phy_base = phys_base;
-	_asic_register_map = *map;
-	register_map_virtualize(&_asic_register_map);
-	asic_base = (unsigned long)ioremap_nocache(phys_base, ASIC_IO_SIZE);
-}
-
-/**
- * configure_platform - configuration based on platform type.
- */
-void __init configure_platform(void)
-{
-	platform_set_family();
-
-	switch (platform_family) {
-	case FAMILY_1500:
-	case FAMILY_1500VZE:
-	case FAMILY_1500VZF:
-		platform_features = FFS_CAPABLE;
-		asic = ASIC_CALLIOPE;
-		set_register_map(CALLIOPE_IO_BASE, &calliope_register_map);
-
-		if (platform_family == FAMILY_1500VZE) {
-			gp_resources = non_dvr_vze_calliope_resources;
-			pr_info("Platform: 1500/Vz Class E - "
-				"CALLIOPE, NON_DVR_CAPABLE\n");
-		} else if (platform_family == FAMILY_1500VZF) {
-			gp_resources = non_dvr_vzf_calliope_resources;
-			pr_info("Platform: 1500/Vz Class F - "
-				"CALLIOPE, NON_DVR_CAPABLE\n");
-		} else {
-			gp_resources = non_dvr_calliope_resources;
-			pr_info("Platform: 1500/RNG100 - CALLIOPE, "
-				"NON_DVR_CAPABLE\n");
-		}
-		break;
-
-	case FAMILY_4500:
-		platform_features = FFS_CAPABLE | PCIE_CAPABLE |
-			DISPLAY_CAPABLE;
-		asic = ASIC_ZEUS;
-		set_register_map(ZEUS_IO_BASE, &zeus_register_map);
-		gp_resources = non_dvr_zeus_resources;
-
-		pr_info("Platform: 4500 - ZEUS, NON_DVR_CAPABLE\n");
-		break;
-
-	case FAMILY_4600:
-	{
-		unsigned int chipversion = 0;
-
-		/* The settop has PCIE but it isn't used, so don't advertise
-		 * it*/
-		platform_features = FFS_CAPABLE | DISPLAY_CAPABLE;
-
-		/* Cronus and Cronus Lite have the same register map */
-		set_register_map(CRONUS_IO_BASE, &cronus_register_map);
-
-		/* ASIC version will determine if this is a real CronusLite or
-		 * Castrati(Cronus) */
-		chipversion  = asic_read(chipver3) << 24;
-		chipversion |= asic_read(chipver2) << 16;
-		chipversion |= asic_read(chipver1) << 8;
-		chipversion |= asic_read(chipver0);
-
-		if ((chipversion == CRONUS_10) || (chipversion == CRONUS_11))
-			asic = ASIC_CRONUS;
-		else
-			asic = ASIC_CRONUSLITE;
-
-		gp_resources = non_dvr_cronuslite_resources;
-		pr_info("Platform: 4600 - %s, NON_DVR_CAPABLE, "
-			"chipversion=0x%08X\n",
-			(asic == ASIC_CRONUS) ? "CRONUS" : "CRONUS LITE",
-			chipversion);
-		break;
-	}
-	case FAMILY_4600VZA:
-		platform_features = FFS_CAPABLE | DISPLAY_CAPABLE;
-		asic = ASIC_CRONUS;
-		set_register_map(CRONUS_IO_BASE, &cronus_register_map);
-		gp_resources = non_dvr_cronus_resources;
-
-		pr_info("Platform: Vz Class A - CRONUS, NON_DVR_CAPABLE\n");
-		break;
-
-	case FAMILY_8500:
-	case FAMILY_8500RNG:
-		platform_features = DVR_CAPABLE | PCIE_CAPABLE |
-			DISPLAY_CAPABLE;
-		asic = ASIC_ZEUS;
-		set_register_map(ZEUS_IO_BASE, &zeus_register_map);
-		gp_resources = dvr_zeus_resources;
-
-		pr_info("Platform: 8500/RNG200 - ZEUS, DVR_CAPABLE\n");
-		break;
-
-	case FAMILY_8600:
-	case FAMILY_8600VZB:
-		platform_features = DVR_CAPABLE | PCIE_CAPABLE |
-			DISPLAY_CAPABLE;
-		asic = ASIC_CRONUS;
-		set_register_map(CRONUS_IO_BASE, &cronus_register_map);
-		gp_resources = dvr_cronus_resources;
-
-		pr_info("Platform: 8600/Vz Class B - CRONUS, "
-			"DVR_CAPABLE\n");
-		break;
-
-	case FAMILY_8700:
-		platform_features = FFS_CAPABLE | PCIE_CAPABLE;
-		asic = ASIC_GAIA;
-		set_register_map(GAIA_IO_BASE, &gaia_register_map);
-		gp_resources = dvr_gaia_resources;
-
-		pr_info("Platform: 8700 - GAIA, DVR_CAPABLE\n");
-		break;
-
-	default:
-		pr_crit("Platform:  UNKNOWN PLATFORM\n");
-		break;
-	}
-
-	switch (asic) {
-	case ASIC_ZEUS:
-		phys_to_dma_offset = 0x30000000;
-		break;
-	case ASIC_CALLIOPE:
-		phys_to_dma_offset = 0x10000000;
-		break;
-	case ASIC_CRONUSLITE:
-		/* Fall through */
-	case ASIC_CRONUS:
-		/*
-		 * TODO: We suppose 0x10000000 aliases into 0x20000000-
-		 * 0x2XXXXXXX. If 0x10000000 aliases into 0x60000000-
-		 * 0x6XXXXXXX, the offset should be 0x50000000, not 0x10000000.
-		 */
-		phys_to_dma_offset = 0x10000000;
-		break;
-	default:
-		phys_to_dma_offset = 0x00000000;
-		break;
-	}
-}
-
-/*
- * RESOURCE ALLOCATION
- *
- */
-/*
- * Allocates/reserves the Platform memory resources early in the boot process.
- * This ignores any resources that are designated IORESOURCE_IO
- */
-void __init platform_alloc_bootmem(void)
-{
-	int i;
-	int total = 0;
-
-	/* Get persistent memory data from command line before allocating
-	 * resources. This need to happen before normal command line parsing
-	 * has been done */
-	pmem_setup_resource();
-
-	/* Loop through looking for resources that want a particular address */
-	for (i = 0; gp_resources[i].flags != 0; i++) {
-		int size = resource_size(&gp_resources[i]);
-		if ((gp_resources[i].start != 0) &&
-			((gp_resources[i].flags & IORESOURCE_MEM) != 0)) {
-			reserve_bootmem(dma_to_phys(gp_resources[i].start),
-				size, 0);
-			total += resource_size(&gp_resources[i]);
-			pr_info("reserve resource %s at %08x (%u bytes)\n",
-				gp_resources[i].name, gp_resources[i].start,
-				resource_size(&gp_resources[i]));
-		}
-	}
-
-	/* Loop through assigning addresses for those that are left */
-	for (i = 0; gp_resources[i].flags != 0; i++) {
-		int size = resource_size(&gp_resources[i]);
-		if ((gp_resources[i].start == 0) &&
-			((gp_resources[i].flags & IORESOURCE_MEM) != 0)) {
-			void *mem = alloc_bootmem_pages(size);
-
-			if (mem == NULL)
-				pr_err("Unable to allocate bootmem pages "
-					"for %s\n", gp_resources[i].name);
-
-			else {
-				gp_resources[i].start =
-					phys_to_dma(virt_to_phys(mem));
-				gp_resources[i].end =
-					gp_resources[i].start + size - 1;
-				total += size;
-				pr_info("allocate resource %s at %08x "
-						"(%u bytes)\n",
-					gp_resources[i].name,
-					gp_resources[i].start, size);
-			}
-		}
-	}
-
-	pr_info("Total Platform driver memory allocation: 0x%08x\n", total);
-
-	/* indicate resources that are platform I/O related */
-	for (i = 0; gp_resources[i].flags != 0; i++) {
-		if ((gp_resources[i].start != 0) &&
-			((gp_resources[i].flags & IORESOURCE_IO) != 0)) {
-			pr_info("reserved platform resource %s at %08x\n",
-				gp_resources[i].name, gp_resources[i].start);
-		}
-	}
-}
-
-/*
- *
- * PERSISTENT MEMORY (PMEM) CONFIGURATION
- *
- */
-static unsigned long pmemaddr __initdata;
-
-static int __init early_param_pmemaddr(char *p)
-{
-	pmemaddr = (unsigned long)simple_strtoul(p, NULL, 0);
-	return 0;
-}
-early_param("pmemaddr", early_param_pmemaddr);
-
-static long pmemlen __initdata;
-
-static int __init early_param_pmemlen(char *p)
-{
-/* TODO: we can use this code when and if the bootloader ever changes this */
-#if 0
-	pmemlen = (unsigned long)simple_strtoul(p, NULL, 0);
-#else
-	pmemlen = 0x20000;
-#endif
-	return 0;
-}
-early_param("pmemlen", early_param_pmemlen);
-
-/*
- * Set up persistent memory. If we were given values, we patch the array of
- * resources. Otherwise, persistent memory may be allocated anywhere at all.
- */
-static void __init pmem_setup_resource(void)
-{
-	struct resource *resource;
-	resource = asic_resource_get("DiagPersistentMemory");
-
-	if (resource && pmemaddr && pmemlen) {
-		/* The address provided by bootloader is in kseg0. Convert to
-		 * a bus address. */
-		resource->start = phys_to_dma(pmemaddr - 0x80000000);
-		resource->end = resource->start + pmemlen - 1;
-
-		pr_info("persistent memory: start=0x%x	end=0x%x\n",
-			resource->start, resource->end);
-	}
-}
-
-/*
- *
- * RESOURCE ACCESS FUNCTIONS
- *
- */
-
-/**
- * asic_resource_get - retrieves parameters for a platform resource.
- * @name:	string to match resource
- *
- * Returns a pointer to a struct resource corresponding to the given name.
- *
- * CANNOT BE NAMED platform_resource_get, which would be the obvious choice,
- * as this function name is already declared
- */
-struct resource *asic_resource_get(const char *name)
-{
-	int i;
-
-	for (i = 0; gp_resources[i].flags != 0; i++) {
-		if (strcmp(gp_resources[i].name, name) == 0)
-			return &gp_resources[i];
-	}
-
-	return NULL;
-}
-EXPORT_SYMBOL(asic_resource_get);
-
-/**
- * platform_release_memory - release pre-allocated memory
- * @ptr:	pointer to memory to release
- * @size:	size of resource
- *
- * This must only be called for memory allocated or reserved via the boot
- * memory allocator.
- */
-void platform_release_memory(void *ptr, int size)
-{
-	free_reserved_area(ptr, ptr + size, -1, NULL);
-}
-EXPORT_SYMBOL(platform_release_memory);
-
-/*
- *
- * FEATURE AVAILABILITY FUNCTIONS
- *
- */
-int platform_supports_dvr(void)
-{
-	return (platform_features & DVR_CAPABLE) != 0;
-}
-
-int platform_supports_ffs(void)
-{
-	return (platform_features & FFS_CAPABLE) != 0;
-}
-
-int platform_supports_pcie(void)
-{
-	return (platform_features & PCIE_CAPABLE) != 0;
-}
-
-int platform_supports_display(void)
-{
-	return (platform_features & DISPLAY_CAPABLE) != 0;
-}
diff --git a/arch/mips/powertv/asic/asic_int.c b/arch/mips/powertv/asic/asic_int.c
deleted file mode 100644
index f44cd92..0000000
--- a/arch/mips/powertv/asic/asic_int.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc.
- * Copyright (C) 2001 Ralf Baechle
- * Portions copyright (C) 2009	Cisco Systems, Inc.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Routines for generic manipulation of the interrupts found on the PowerTV
- * platform.
- *
- * The interrupt controller is located in the South Bridge a PIIX4 device
- * with two internal 82C95 interrupt controllers.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/kernel.h>
-#include <linux/random.h>
-
-#include <asm/irq_cpu.h>
-#include <linux/io.h>
-#include <asm/irq_regs.h>
-#include <asm/setup.h>
-#include <asm/mips-boards/generic.h>
-
-#include <asm/mach-powertv/asic_regs.h>
-
-static DEFINE_RAW_SPINLOCK(asic_irq_lock);
-
-static inline int get_int(void)
-{
-	unsigned long flags;
-	int irq;
-
-	raw_spin_lock_irqsave(&asic_irq_lock, flags);
-
-	irq = (asic_read(int_int_scan) >> 4) - 1;
-
-	if (irq == 0 || irq >= NR_IRQS)
-		irq = -1;
-
-	raw_spin_unlock_irqrestore(&asic_irq_lock, flags);
-
-	return irq;
-}
-
-static void asic_irqdispatch(void)
-{
-	int irq;
-
-	irq = get_int();
-	if (irq < 0)
-		return;	 /* interrupt has already been cleared */
-
-	do_IRQ(irq);
-}
-
-static inline int clz(unsigned long x)
-{
-	__asm__(
-	"	.set	push					\n"
-	"	.set	mips32					\n"
-	"	clz	%0, %1					\n"
-	"	.set	pop					\n"
-	: "=r" (x)
-	: "r" (x));
-
-	return x;
-}
-
-/*
- * Version of ffs that only looks at bits 12..15.
- */
-static inline unsigned int irq_ffs(unsigned int pending)
-{
-	return fls(pending) - 1 + CAUSEB_IP;
-}
-
-/*
- * TODO: check how it works under EIC mode.
- */
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
-	int irq;
-
-	irq = irq_ffs(pending);
-
-	if (irq == CAUSEF_IP3)
-		asic_irqdispatch();
-	else if (irq >= 0)
-		do_IRQ(irq);
-	else
-		spurious_interrupt();
-}
-
-void __init arch_init_irq(void)
-{
-	int i;
-
-	asic_irq_init();
-
-	/*
-	 * Initialize interrupt exception vectors.
-	 */
-	if (cpu_has_veic || cpu_has_vint) {
-		int nvec = cpu_has_veic ? 64 : 8;
-		for (i = 0; i < nvec; i++)
-			set_vi_handler(i, asic_irqdispatch);
-	}
-}
diff --git a/arch/mips/powertv/asic/irq_asic.c b/arch/mips/powertv/asic/irq_asic.c
deleted file mode 100644
index 9344902..0000000
--- a/arch/mips/powertv/asic/irq_asic.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Portions copyright (C) 2005-2009 Scientific Atlanta
- * Portions copyright (C) 2009 Cisco Systems, Inc.
- *
- * Modified from arch/mips/kernel/irq-rm7000.c:
- * Copyright (C) 2003 Ralf Baechle
- *
- * This program is free software; you can redistribute	it and/or modify it
- * under  the terms of	the GNU General	 Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/irq.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-
-#include <asm/mach-powertv/asic_regs.h>
-
-static inline void unmask_asic_irq(struct irq_data *d)
-{
-	unsigned long enable_bit;
-	unsigned int irq = d->irq;
-
-	enable_bit = (1 << (irq & 0x1f));
-
-	switch (irq >> 5) {
-	case 0:
-		asic_write(asic_read(ien_int_0) | enable_bit, ien_int_0);
-		break;
-	case 1:
-		asic_write(asic_read(ien_int_1) | enable_bit, ien_int_1);
-		break;
-	case 2:
-		asic_write(asic_read(ien_int_2) | enable_bit, ien_int_2);
-		break;
-	case 3:
-		asic_write(asic_read(ien_int_3) | enable_bit, ien_int_3);
-		break;
-	default:
-		BUG();
-	}
-}
-
-static inline void mask_asic_irq(struct irq_data *d)
-{
-	unsigned long disable_mask;
-	unsigned int irq = d->irq;
-
-	disable_mask = ~(1 << (irq & 0x1f));
-
-	switch (irq >> 5) {
-	case 0:
-		asic_write(asic_read(ien_int_0) & disable_mask, ien_int_0);
-		break;
-	case 1:
-		asic_write(asic_read(ien_int_1) & disable_mask, ien_int_1);
-		break;
-	case 2:
-		asic_write(asic_read(ien_int_2) & disable_mask, ien_int_2);
-		break;
-	case 3:
-		asic_write(asic_read(ien_int_3) & disable_mask, ien_int_3);
-		break;
-	default:
-		BUG();
-	}
-}
-
-static struct irq_chip asic_irq_chip = {
-	.name = "ASIC Level",
-	.irq_mask = mask_asic_irq,
-	.irq_unmask = unmask_asic_irq,
-};
-
-void __init asic_irq_init(void)
-{
-	int i;
-
-	/* set priority to 0 */
-	write_c0_status(read_c0_status() & ~(0x0000fc00));
-
-	asic_write(0, ien_int_0);
-	asic_write(0, ien_int_1);
-	asic_write(0, ien_int_2);
-	asic_write(0, ien_int_3);
-
-	asic_write(0x0fffffff, int_level_3_3);
-	asic_write(0xffffffff, int_level_3_2);
-	asic_write(0xffffffff, int_level_3_1);
-	asic_write(0xffffffff, int_level_3_0);
-	asic_write(0xffffffff, int_level_2_3);
-	asic_write(0xffffffff, int_level_2_2);
-	asic_write(0xffffffff, int_level_2_1);
-	asic_write(0xffffffff, int_level_2_0);
-	asic_write(0xffffffff, int_level_1_3);
-	asic_write(0xffffffff, int_level_1_2);
-	asic_write(0xffffffff, int_level_1_1);
-	asic_write(0xffffffff, int_level_1_0);
-	asic_write(0xffffffff, int_level_0_3);
-	asic_write(0xffffffff, int_level_0_2);
-	asic_write(0xffffffff, int_level_0_1);
-	asic_write(0xffffffff, int_level_0_0);
-
-	asic_write(0xf, int_int_scan);
-
-	/*
-	 * Initialize interrupt handlers.
-	 */
-	for (i = 0; i < NR_IRQS; i++)
-		irq_set_chip_and_handler(i, &asic_irq_chip, handle_level_irq);
-}
diff --git a/arch/mips/powertv/asic/prealloc-calliope.c b/arch/mips/powertv/asic/prealloc-calliope.c
deleted file mode 100644
index 98dc516..0000000
--- a/arch/mips/powertv/asic/prealloc-calliope.c
+++ /dev/null
@@ -1,385 +0,0 @@
-/*
- * Memory pre-allocations for Calliope boxes.
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * Author:	 Ken Eppinett
- *		 David Schleef <ds@schleef.org>
- */
-
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <asm/mach-powertv/asic.h>
-#include "prealloc.h"
-
-/*
- * NON_DVR_CAPABLE CALLIOPE RESOURCES
- */
-struct resource non_dvr_calliope_resources[] __initdata =
-{
-	/*
-	 * VIDEO / LX1
-	 */
-	/* Delta-Mu 1 image (2MiB) */
-	PREALLOC_NORMAL("ST231aImage", 0x24000000, 0x24200000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 monitor (8KiB) */
-	PREALLOC_NORMAL("ST231aMonitor", 0x24200000, 0x24202000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 RAM (~36.9MiB (32MiB - (2MiB + 8KiB))) */
-	PREALLOC_NORMAL("MediaMemory1", 0x24202000, 0x26700000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * Sysaudio Driver
-	 */
-	/* DSP code and data images (1MiB) */
-	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC CPU PCM buffer (40KiB) */
-	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC AUX buffer (128KiB) */
-	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC Main buffer (128KiB) */
-	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * STAVEM driver/STAPI
-	 */
-	/* 6MiB */
-	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00600000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * DOCSIS Subsystem
-	 */
-	/* 7MiB */
-	PREALLOC_DOCSIS("Docsis", 0x27500000, 0x27c00000-1, IORESOURCE_MEM)
-
-	/*
-	 * GHW HAL Driver
-	 */
-	/* PowerTV Graphics Heap (14MiB) */
-	PREALLOC_NORMAL("GraphicsHeap", 0x26700000, 0x26700000+(14*1048576)-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * multi com buffer area
-	 */
-	/* 128KiB */
-	PREALLOC_NORMAL("MulticomSHM", 0x23700000, 0x23720000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * DMA Ring buffer (don't need recording buffers)
-	 */
-	/* 680KiB */
-	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Display bins buffer for unit0
-	 */
-	/* 4KiB */
-	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * AVFS: player HAL memory
-	 */
-	/* 945K * 3 for playback */
-	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * PMEM
-	 */
-	/* Persistent memory for diagnostics (64KiB) */
-	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
-	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Smartcard
-	 */
-	/* Read and write buffers for Internal/External cards (10KiB) */
-	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * NAND Flash
-	 */
-	/* 10KiB */
-	PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * Synopsys GMAC Memory Region
-	 */
-	/* 64KiB */
-	PREALLOC_NORMAL("GMAC", 0x00000000, 0x00010000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * TFTPBuffer
-	 *
-	 *  This buffer is used in some minimal configurations (e.g. two-way
-	 *  loader) for storing software images
-	 */
-	PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Add other resources here
-	 */
-
-	/*
-	 * End of Resource marker
-	 */
-	{
-		.flags	= 0,
-	},
-};
-
-
-struct resource non_dvr_vze_calliope_resources[] __initdata =
-{
-	/*
-	 * VIDEO / LX1
-	 */
-	/* Delta-Mu 1 image (2MiB) */
-	PREALLOC_NORMAL("ST231aImage", 0x22000000, 0x22200000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 monitor (8KiB) */
-	PREALLOC_NORMAL("ST231aMonitor", 0x22200000, 0x22202000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 RAM (10.12MiB) */
-	PREALLOC_NORMAL("MediaMemory1", 0x22202000, 0x22C20B85-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * Sysaudio Driver
-	 */
-	/* DSP code and data images (1MiB) */
-	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC CPU PCM buffer (40KiB) */
-	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC AUX buffer (16KiB) */
-	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00004000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC Main buffer (16KiB) */
-	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00004000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * STAVEM driver/STAPI
-	 */
-	/* 3.125MiB */
-	PREALLOC_NORMAL("AVMEMPartition0", 0x20396000, 0x206B6000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * GHW HAL Driver
-	 */
-	/* PowerTV Graphics Heap (2.59MiB) */
-	PREALLOC_NORMAL("GraphicsHeap", 0x20100000, 0x20396000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * multi com buffer area
-	 */
-	/* 128KiB */
-	PREALLOC_NORMAL("MulticomSHM", 0x206B6000, 0x206D6000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * DMA Ring buffer (don't need recording buffers)
-	 */
-	/* 680KiB */
-	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Display bins buffer for unit0
-	 */
-	/* 4KiB */
-	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * PMEM
-	 */
-	/* Persistent memory for diagnostics (64KiB) */
-	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
-	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Smartcard
-	 */
-	/* Read and write buffers for Internal/External cards (10KiB) */
-	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * NAND Flash
-	 */
-	/* 10KiB */
-	PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * Synopsys GMAC Memory Region
-	 */
-	/* 64KiB */
-	PREALLOC_NORMAL("GMAC", 0x00000000, 0x00010000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Add other resources here
-	 */
-
-	/*
-	 * End of Resource marker
-	 */
-	{
-		.flags	= 0,
-	},
-};
-
-struct resource non_dvr_vzf_calliope_resources[] __initdata =
-{
-	/*
-	 * VIDEO / LX1
-	 */
-	/* Delta-Mu 1 image (2MiB) */
-	PREALLOC_NORMAL("ST231aImage", 0x24000000, 0x24200000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 monitor (8KiB) */
-	PREALLOC_NORMAL("ST231aMonitor", 0x24200000, 0x24202000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 RAM (~19.4 (21.5MiB - (2MiB + 8KiB))) */
-	PREALLOC_NORMAL("MediaMemory1", 0x24202000, 0x25580000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * Sysaudio Driver
-	 */
-	/* DSP code and data images (1MiB) */
-	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC CPU PCM buffer (40KiB) */
-	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC AUX buffer (128KiB) */
-	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC Main buffer (128KiB) */
-	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * STAVEM driver/STAPI
-	 */
-	/* 4.5MiB */
-	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00480000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * GHW HAL Driver
-	 */
-	/* PowerTV Graphics Heap (14MiB) */
-	PREALLOC_NORMAL("GraphicsHeap", 0x25600000, 0x25600000+(14*1048576)-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * multi com buffer area
-	 */
-	/* 128KiB */
-	PREALLOC_NORMAL("MulticomSHM", 0x23700000, 0x23720000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * DMA Ring buffer (don't need recording buffers)
-	 */
-	/* 680KiB */
-	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Display bins buffer for unit0
-	 */
-	/* 4KiB */
-	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Display bins buffer for unit1
-	 */
-	/* 4KiB */
-	PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * AVFS: player HAL memory
-	 */
-	/* 945K * 3 for playback */
-	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * PMEM
-	 */
-	/* Persistent memory for diagnostics (64KiB) */
-	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
-	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Smartcard
-	 */
-	/* Read and write buffers for Internal/External cards (10KiB) */
-	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * NAND Flash
-	 */
-	/* 10KiB */
-	PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * Synopsys GMAC Memory Region
-	 */
-	/* 64KiB */
-	PREALLOC_NORMAL("GMAC", 0x00000000, 0x00010000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Add other resources here
-	 */
-
-	/*
-	 * End of Resource marker
-	 */
-	{
-		.flags	= 0,
-	},
-};
diff --git a/arch/mips/powertv/asic/prealloc-cronus.c b/arch/mips/powertv/asic/prealloc-cronus.c
deleted file mode 100644
index 7c6ce75..0000000
--- a/arch/mips/powertv/asic/prealloc-cronus.c
+++ /dev/null
@@ -1,340 +0,0 @@
-/*
- * Memory pre-allocations for Cronus boxes.
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * Author:	 Ken Eppinett
- *		 David Schleef <ds@schleef.org>
- */
-
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <asm/mach-powertv/asic.h>
-#include "prealloc.h"
-
-/*
- * DVR_CAPABLE CRONUS RESOURCES
- */
-struct resource dvr_cronus_resources[] __initdata =
-{
-	/*
-	 * VIDEO1 / LX1
-	 */
-	/* Delta-Mu 1 image (2MiB) */
-	PREALLOC_NORMAL("ST231aImage", 0x24000000, 0x24200000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 monitor (8KiB) */
-	PREALLOC_NORMAL("ST231aMonitor", 0x24200000, 0x24202000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
-	PREALLOC_NORMAL("MediaMemory1", 0x24202000, 0x26000000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * VIDEO2 / LX2
-	 */
-	/* Delta-Mu 2 image (2MiB) */
-	PREALLOC_NORMAL("ST231bImage", 0x60000000, 0x60200000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 2 monitor (8KiB) */
-	PREALLOC_NORMAL("ST231bMonitor", 0x60200000, 0x60202000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 2 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
-	PREALLOC_NORMAL("MediaMemory2", 0x60202000, 0x62000000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * Sysaudio Driver
-	 */
-	/* DSP code and data images (1MiB) */
-	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC CPU PCM buffer (40KiB) */
-	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC AUX buffer (128KiB) */
-	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC Main buffer (128KiB) */
-	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * STAVEM driver/STAPI
-	 *
-	 *  This memory area is used for allocating buffers for Video decoding
-	 *  purposes.  Allocation/De-allocation within this buffer is managed
-	 *  by the STAVMEM driver of the STAPI.	 They could be Decimated
-	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
-	 *  video decoding purposes, for any video decoders on Zeus.
-	 */
-	/* 12MiB */
-	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00c00000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * DOCSIS Subsystem
-	 */
-	/* 7MiB */
-	PREALLOC_DOCSIS("Docsis", 0x67500000, 0x67c00000-1, IORESOURCE_MEM)
-
-	/*
-	 * GHW HAL Driver
-	 */
-	/* PowerTV Graphics Heap (14MiB) */
-	PREALLOC_NORMAL("GraphicsHeap", 0x62700000, 0x63500000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * multi com buffer area
-	 */
-	/* 128KiB */
-	PREALLOC_NORMAL("MulticomSHM", 0x26000000, 0x26020000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * DMA Ring buffer
-	 */
-	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x002EA000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Display bins buffer for unit0
-	 */
-	/* 4KiB */
-	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Display bins buffer for unit1
-	 */
-	/* 4KiB */
-	PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * ITFS
-	 */
-	/* 815,104 bytes each for 2 ITFS partitions. */
-	PREALLOC_NORMAL("ITFS", 0x00000000, 0x0018E000-1, IORESOURCE_MEM)
-
-	/*
-	 * AVFS
-	 */
-	/* (945K * 8) = (128K * 3) 5 playbacks / 3 server */
-	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x007c2000-1,
-		IORESOURCE_MEM)
-
-	/* 4KiB */
-	PREALLOC_NORMAL("AvfsFileSys", 0x00000000, 0x00001000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * PMEM
-	 */
-	/* Persistent memory for diagnostics (64KiB) */
-	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
-	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Smartcard
-	 */
-	/* Read and write buffers for Internal/External cards (10KiB) */
-	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * KAVNET
-	 */
-	/* NP Reset Vector - must be of the form xxCxxxxx (4KiB) */
-	PREALLOC_NORMAL("NP_Reset_Vector", 0x27c00000, 0x27c01000-1,
-		IORESOURCE_MEM)
-	/* NP Image - must be video bank 1 (320KiB) */
-	PREALLOC_NORMAL("NP_Image", 0x27020000, 0x27070000-1, IORESOURCE_MEM)
-	/* NP IPC - must be video bank 2 (512KiB) */
-	PREALLOC_NORMAL("NP_IPC", 0x63500000, 0x63580000-1, IORESOURCE_MEM)
-
-	/*
-	 * TFTPBuffer
-	 *
-	 *  This buffer is used in some minimal configurations (e.g. two-way
-	 *  loader) for storing software images
-	 */
-	PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Add other resources here
-	 */
-
-	/*
-	 * End of Resource marker
-	 */
-	{
-		.flags	= 0,
-	},
-};
-
-/*
- * NON_DVR_CAPABLE CRONUS RESOURCES
- */
-struct resource non_dvr_cronus_resources[] __initdata =
-{
-	/*
-	 * VIDEO1 / LX1
-	 */
-	/* Delta-Mu 1 image (2MiB) */
-	PREALLOC_NORMAL("ST231aImage", 0x24000000, 0x24200000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 monitor (8KiB) */
-	PREALLOC_NORMAL("ST231aMonitor", 0x24200000, 0x24202000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
-	PREALLOC_NORMAL("MediaMemory1", 0x24202000, 0x26000000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * VIDEO2 / LX2
-	 */
-	/* Delta-Mu 2 image (2MiB) */
-	PREALLOC_NORMAL("ST231bImage", 0x60000000, 0x60200000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 2 monitor (8KiB) */
-	PREALLOC_NORMAL("ST231bMonitor", 0x60200000, 0x60202000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 2 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
-	PREALLOC_NORMAL("MediaMemory2", 0x60202000, 0x62000000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * Sysaudio Driver
-	 */
-	/* DSP code and data images (1MiB) */
-	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC CPU PCM buffer (40KiB) */
-	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC AUX buffer (128KiB) */
-	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC Main buffer (128KiB) */
-	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * STAVEM driver/STAPI
-	 *
-	 *  This memory area is used for allocating buffers for Video decoding
-	 *  purposes.  Allocation/De-allocation within this buffer is managed
-	 *  by the STAVMEM driver of the STAPI.	 They could be Decimated
-	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
-	 *  video decoding purposes, for any video decoders on Zeus.
-	 */
-	/* 12MiB */
-	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00c00000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * DOCSIS Subsystem
-	 */
-	/* 7MiB */
-	PREALLOC_DOCSIS("Docsis", 0x67500000, 0x67c00000-1, IORESOURCE_MEM)
-
-	/*
-	 * GHW HAL Driver
-	 */
-	/* PowerTV Graphics Heap (14MiB) */
-	PREALLOC_NORMAL("GraphicsHeap", 0x62700000, 0x63500000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * multi com buffer area
-	 */
-	/* 128KiB */
-	PREALLOC_NORMAL("MulticomSHM", 0x26000000, 0x26020000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * DMA Ring buffer (don't need recording buffers)
-	 */
-	/* 680KiB */
-	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Display bins buffer for unit0
-	 */
-	/* 4KiB */
-	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Display bins buffer for unit1
-	 */
-	/* 4KiB */
-	PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * AVFS: player HAL memory
-	 */
-	/* 945K * 3 for playback */
-	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1, IORESOURCE_MEM)
-
-	/*
-	 * PMEM
-	 */
-	/* Persistent memory for diagnostics (64KiB) */
-	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
-	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Smartcard
-	 */
-	/* Read and write buffers for Internal/External cards (10KiB) */
-	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1, IORESOURCE_MEM)
-
-	/*
-	 * KAVNET
-	 */
-	/* NP Reset Vector - must be of the form xxCxxxxx (4KiB) */
-	PREALLOC_NORMAL("NP_Reset_Vector", 0x27c00000, 0x27c01000-1,
-		IORESOURCE_MEM)
-	/* NP Image - must be video bank 1 (320KiB) */
-	PREALLOC_NORMAL("NP_Image", 0x27020000, 0x27070000-1, IORESOURCE_MEM)
-	/* NP IPC - must be video bank 2 (512KiB) */
-	PREALLOC_NORMAL("NP_IPC", 0x63500000, 0x63580000-1, IORESOURCE_MEM)
-
-	/*
-	 * NAND Flash
-	 */
-	/* 10KiB */
-	PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * Add other resources here
-	 */
-
-	/*
-	 * End of Resource marker
-	 */
-	{
-		.flags	= 0,
-	},
-};
diff --git a/arch/mips/powertv/asic/prealloc-cronuslite.c b/arch/mips/powertv/asic/prealloc-cronuslite.c
deleted file mode 100644
index a7937ba..0000000
--- a/arch/mips/powertv/asic/prealloc-cronuslite.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * Memory pre-allocations for Cronus Lite boxes.
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * Author:	 Ken Eppinett
- *		 David Schleef <ds@schleef.org>
- */
-
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <asm/mach-powertv/asic.h>
-#include "prealloc.h"
-
-/*
- * NON_DVR_CAPABLE CRONUSLITE RESOURCES
- */
-struct resource non_dvr_cronuslite_resources[] __initdata =
-{
-	/*
-	 * VIDEO2 / LX2
-	 */
-	/* Delta-Mu 1 image (2MiB) */
-	PREALLOC_NORMAL("ST231aImage", 0x60000000, 0x60200000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 monitor (8KiB) */
-	PREALLOC_NORMAL("ST231aMonitor", 0x60200000, 0x60202000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
-	PREALLOC_NORMAL("MediaMemory1", 0x60202000, 0x62000000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * Sysaudio Driver
-	 */
-	/* DSP code and data images (1MiB) */
-	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC CPU PCM buffer (40KiB) */
-	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC AUX buffer (128KiB) */
-	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC Main buffer (128KiB) */
-	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * STAVEM driver/STAPI
-	 *
-	 *  This memory area is used for allocating buffers for Video decoding
-	 *  purposes.  Allocation/De-allocation within this buffer is managed
-	 *  by the STAVMEM driver of the STAPI.	 They could be Decimated
-	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
-	 *  video decoding purposes, for any video decoders on Zeus.
-	 */
-	/* 6MiB */
-	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00600000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * DOCSIS Subsystem
-	 */
-	/* 7MiB */
-	PREALLOC_DOCSIS("Docsis", 0x67500000, 0x67c00000-1, IORESOURCE_MEM)
-
-	/*
-	 * GHW HAL Driver
-	 */
-	/* PowerTV Graphics Heap (14MiB) */
-	PREALLOC_NORMAL("GraphicsHeap", 0x62700000, 0x63500000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * multi com buffer area
-	 */
-	/* 128KiB */
-	PREALLOC_NORMAL("MulticomSHM", 0x26000000, 0x26020000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * DMA Ring buffer (don't need recording buffers)
-	 */
-	/* 680KiB */
-	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Display bins buffer for unit0
-	 */
-	/* 4KiB */
-	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Display bins buffer for unit1
-	 */
-	/* 4KiB */
-	PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * AVFS: player HAL memory
-	 */
-	/* 945K * 3 for playback */
-	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * PMEM
-	 */
-	/* Persistent memory for diagnostics (64KiB) */
-	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
-	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Smartcard
-	 */
-	/* Read and write buffers for Internal/External cards (10KiB) */
-	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1, IORESOURCE_MEM)
-
-	/*
-	 * KAVNET
-	 */
-	/* NP Reset Vector - must be of the form xxCxxxxx (4KiB) */
-	PREALLOC_NORMAL("NP_Reset_Vector", 0x27c00000, 0x27c01000-1,
-		IORESOURCE_MEM)
-	/* NP Image - must be video bank 1 (320KiB) */
-	PREALLOC_NORMAL("NP_Image", 0x27020000, 0x27070000-1, IORESOURCE_MEM)
-	/* NP IPC - must be video bank 2 (512KiB) */
-	PREALLOC_NORMAL("NP_IPC", 0x63500000, 0x63580000-1, IORESOURCE_MEM)
-
-	/*
-	 * NAND Flash
-	 */
-	/* 10KiB */
-	PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * TFTPBuffer
-	 *
-	 *  This buffer is used in some minimal configurations (e.g. two-way
-	 *  loader) for storing software images
-	 */
-	PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Add other resources here
-	 */
-
-	/*
-	 * End of Resource marker
-	 */
-	{
-		.flags	= 0,
-	},
-};
diff --git a/arch/mips/powertv/asic/prealloc-gaia.c b/arch/mips/powertv/asic/prealloc-gaia.c
deleted file mode 100644
index 2303bbf..0000000
--- a/arch/mips/powertv/asic/prealloc-gaia.c
+++ /dev/null
@@ -1,589 +0,0 @@
-/*
- * Memory pre-allocations for Gaia boxes.
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * Author:	 David VomLehn
- */
-
-#include <linux/init.h>
-#include <asm/mach-powertv/asic.h>
-
-/*
- * DVR_CAPABLE GAIA RESOURCES
- */
-struct resource dvr_gaia_resources[] __initdata = {
-	/*
-	 *
-	 * VIDEO1 / LX1
-	 *
-	 */
-	{
-		.name	= "ST231aImage",	/* Delta-Mu 1 image and ram */
-		.start	= 0x24000000,
-		.end	= 0x241FFFFF,		/* 2MiB */
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "ST231aMonitor",	/* 8KiB block ST231a monitor */
-		.start	= 0x24200000,
-		.end	= 0x24201FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "MediaMemory1",
-		.start	= 0x24202000,
-		.end	= 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags	= IORESOURCE_MEM,
-	},
-	/*
-	 *
-	 * VIDEO2 / LX2
-	 *
-	 */
-	{
-		.name	= "ST231bImage",	/* Delta-Mu 2 image and ram */
-		.start	= 0x60000000,
-		.end	= 0x601FFFFF,		/* 2MiB */
-		.flags	= IORESOURCE_IO,
-	},
-	{
-		.name	= "ST231bMonitor",	/* 8KiB block ST231b monitor */
-		.start	= 0x60200000,
-		.end	= 0x60201FFF,
-		.flags	= IORESOURCE_IO,
-	},
-	{
-		.name	= "MediaMemory2",
-		.start	= 0x60202000,
-		.end	= 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * Sysaudio Driver
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  DSP_Image_Buff - DSP code and data images (1MB)
-	 *  ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
-	 *  ADSC_AUX_Buff - ADSC AUX buffer (16KB)
-	 *  ADSC_Main_Buff - ADSC Main buffer (16KB)
-	 *
-	 */
-	{
-		.name	= "DSP_Image_Buff",
-		.start	= 0x00000000,
-		.end	= 0x000FFFFF,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "ADSC_CPU_PCM_Buff",
-		.start	= 0x00000000,
-		.end	= 0x00009FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "ADSC_AUX_Buff",
-		.start	= 0x00000000,
-		.end	= 0x00003FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "ADSC_Main_Buff",
-		.start	= 0x00000000,
-		.end	= 0x00003FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-	/*
-	 *
-	 * STAVEM driver/STAPI
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  This memory area is used for allocating buffers for Video decoding
-	 *  purposes.  Allocation/De-allocation within this buffer is managed
-	 *  by the STAVMEM driver of the STAPI.	 They could be Decimated
-	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
-	 *  video decoding purposes, for any video decoders on Zeus.
-	 *
-	 */
-	{
-		.name	= "AVMEMPartition0",
-		.start	= 0x63580000,
-		.end	= 0x64180000 - 1,  /* 12 MB total */
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * DOCSIS Subsystem
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
-	 */
-	{
-		.name	= "Docsis",
-		.start	= 0x62000000,
-		.end	= 0x62700000 - 1,	/* 7 MB total */
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * GHW HAL Driver
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  GraphicsHeap - PowerTV Graphics Heap
-	 *
-	 */
-	{
-		.name	= "GraphicsHeap",
-		.start	= 0x62700000,
-		.end	= 0x63500000 - 1,	/* 14 MB total */
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * multi com buffer area
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
-	 */
-	{
-		.name	= "MulticomSHM",
-		.start	= 0x26000000,
-		.end	= 0x26020000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	/*
-	 *
-	 * DMA Ring buffer
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
-	 */
-	{
-		.name	= "BMM_Buffer",
-		.start	= 0x00000000,
-		.end	= 0x00280000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	/*
-	 *
-	 * Display bins buffer for unit0
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Display Bins for unit0
-	 *
-	 */
-	{
-		.name	= "DisplayBins0",
-		.start	= 0x00000000,
-		.end	= 0x00000FFF,		/* 4 KB total */
-		.flags	= IORESOURCE_MEM,
-	},
-	/*
-	 *
-	 * Display bins buffer
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Display Bins for unit1
-	 *
-	 */
-	{
-		.name	= "DisplayBins1",
-		.start	= 0x64AD4000,
-		.end	= 0x64AD5000 - 1,  /* 4 KB total */
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * ITFS
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
-	 */
-	{
-		.name	= "ITFS",
-		.start	= 0x64180000,
-		/* 815,104 bytes each for 2 ITFS partitions. */
-		.end	= 0x6430DFFF,
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * AVFS
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
-	 */
-	{
-		.name	= "AvfsDmaMem",
-		.start	= 0x6430E000,
-		/* (945K * 8) = (128K *3) 5 playbacks / 3 server */
-		.end	= 0x64AD0000 - 1,
-		.flags	= IORESOURCE_IO,
-	},
-	{
-		.name	= "AvfsFileSys",
-		.start	= 0x64AD0000,
-		.end	= 0x64AD1000 - 1,  /* 4K */
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * Smartcard
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Read and write buffers for Internal/External cards
-	 *
-	 */
-	{
-		.name	= "SmartCardInfo",
-		.start	= 0x64AD1000,
-		.end	= 0x64AD3800 - 1,
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * KAVNET
-	 *    NP Reset Vector - must be of the form xxCxxxxx
-	 *	   NP Image - must be video bank 1
-	 *	   NP IPC - must be video bank 2
-	 */
-	{
-		.name	= "NP_Reset_Vector",
-		.start	= 0x27c00000,
-		.end	= 0x27c01000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "NP_Image",
-		.start	= 0x27020000,
-		.end	= 0x27060000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "NP_IPC",
-		.start	= 0x63500000,
-		.end	= 0x63580000 - 1,
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 * Add other resources here
-	 */
-	{ },
-};
-
-/*
- * NON_DVR_CAPABLE GAIA RESOURCES
- */
-struct resource non_dvr_gaia_resources[] __initdata = {
-	/*
-	 *
-	 * VIDEO1 / LX1
-	 *
-	 */
-	{
-		.name	= "ST231aImage",	/* Delta-Mu 1 image and ram */
-		.start	= 0x24000000,
-		.end	= 0x241FFFFF,		/* 2MiB */
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "ST231aMonitor",	/* 8KiB block ST231a monitor */
-		.start	= 0x24200000,
-		.end	= 0x24201FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "MediaMemory1",
-		.start	= 0x24202000,
-		.end	= 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags	= IORESOURCE_MEM,
-	},
-	/*
-	 *
-	 * VIDEO2 / LX2
-	 *
-	 */
-	{
-		.name	= "ST231bImage",	/* Delta-Mu 2 image and ram */
-		.start	= 0x60000000,
-		.end	= 0x601FFFFF,		/* 2MiB */
-		.flags	= IORESOURCE_IO,
-	},
-	{
-		.name	= "ST231bMonitor",	/* 8KiB block ST231b monitor */
-		.start	= 0x60200000,
-		.end	= 0x60201FFF,
-		.flags	= IORESOURCE_IO,
-	},
-	{
-		.name	= "MediaMemory2",
-		.start	= 0x60202000,
-		.end	= 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * Sysaudio Driver
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  DSP_Image_Buff - DSP code and data images (1MB)
-	 *  ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
-	 *  ADSC_AUX_Buff - ADSC AUX buffer (16KB)
-	 *  ADSC_Main_Buff - ADSC Main buffer (16KB)
-	 *
-	 */
-	{
-		.name	= "DSP_Image_Buff",
-		.start	= 0x00000000,
-		.end	= 0x000FFFFF,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "ADSC_CPU_PCM_Buff",
-		.start	= 0x00000000,
-		.end	= 0x00009FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "ADSC_AUX_Buff",
-		.start	= 0x00000000,
-		.end	= 0x00003FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "ADSC_Main_Buff",
-		.start	= 0x00000000,
-		.end	= 0x00003FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-	/*
-	 *
-	 * STAVEM driver/STAPI
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  This memory area is used for allocating buffers for Video decoding
-	 *  purposes.  Allocation/De-allocation within this buffer is managed
-	 *  by the STAVMEM driver of the STAPI.	 They could be Decimated
-	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
-	 *  video decoding purposes, for any video decoders on Zeus.
-	 *
-	 */
-	{
-		.name	= "AVMEMPartition0",
-		.start	= 0x63580000,
-		.end	= 0x64180000 - 1,  /* 12 MB total */
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * DOCSIS Subsystem
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
-	 */
-	{
-		.name	= "Docsis",
-		.start	= 0x62000000,
-		.end	= 0x62700000 - 1,	/* 7 MB total */
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * GHW HAL Driver
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  GraphicsHeap - PowerTV Graphics Heap
-	 *
-	 */
-	{
-		.name	= "GraphicsHeap",
-		.start	= 0x62700000,
-		.end	= 0x63500000 - 1,	/* 14 MB total */
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * multi com buffer area
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
-	 */
-	{
-		.name	= "MulticomSHM",
-		.start	= 0x26000000,
-		.end	= 0x26020000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	/*
-	 *
-	 * DMA Ring buffer
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
-	 */
-	{
-		.name	= "BMM_Buffer",
-		.start	= 0x00000000,
-		.end	= 0x000AA000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	/*
-	 *
-	 * Display bins buffer for unit0
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Display Bins for unit0
-	 *
-	 */
-	{
-		.name	= "DisplayBins0",
-		.start	= 0x00000000,
-		.end	= 0x00000FFF,		/* 4 KB total */
-		.flags	= IORESOURCE_MEM,
-	},
-	/*
-	 *
-	 * Display bins buffer
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Display Bins for unit1
-	 *
-	 */
-	{
-		.name	= "DisplayBins1",
-		.start	= 0x64AD4000,
-		.end	= 0x64AD5000 - 1,  /* 4 KB total */
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * AVFS: player HAL memory
-	 *
-	 *
-	 */
-	{
-		.name	= "AvfsDmaMem",
-		.start	= 0x6430E000,
-		.end	= 0x645D2C00 - 1,  /* 945K * 3 for playback */
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * PMEM
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Persistent memory for diagnostics.
-	 *
-	 */
-	{
-		.name	= "DiagPersistentMemory",
-		.start	= 0x00000000,
-		.end	= 0x10000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	/*
-	 *
-	 * Smartcard
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Read and write buffers for Internal/External cards
-	 *
-	 */
-	{
-		.name	= "SmartCardInfo",
-		.start	= 0x64AD1000,
-		.end	= 0x64AD3800 - 1,
-		.flags	= IORESOURCE_IO,
-	},
-	/*
-	 *
-	 * KAVNET
-	 *    NP Reset Vector - must be of the form xxCxxxxx
-	 *	   NP Image - must be video bank 1
-	 *	   NP IPC - must be video bank 2
-	 */
-	{
-		.name	= "NP_Reset_Vector",
-		.start	= 0x27c00000,
-		.end	= 0x27c01000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "NP_Image",
-		.start	= 0x27020000,
-		.end	= 0x27060000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "NP_IPC",
-		.start	= 0x63500000,
-		.end	= 0x63580000 - 1,
-		.flags	= IORESOURCE_IO,
-	},
-	{ },
-};
diff --git a/arch/mips/powertv/asic/prealloc-zeus.c b/arch/mips/powertv/asic/prealloc-zeus.c
deleted file mode 100644
index 6e76f09..0000000
--- a/arch/mips/powertv/asic/prealloc-zeus.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * Memory pre-allocations for Zeus boxes.
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * Author:	 Ken Eppinett
- *		 David Schleef <ds@schleef.org>
- */
-
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <asm/mach-powertv/asic.h>
-#include "prealloc.h"
-
-/*
- * DVR_CAPABLE RESOURCES
- */
-struct resource dvr_zeus_resources[] __initdata =
-{
-	/*
-	 * VIDEO1 / LX1
-	 */
-	/* Delta-Mu 1 image (2MiB) */
-	PREALLOC_NORMAL("ST231aImage", 0x20000000, 0x20200000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 monitor (8KiB) */
-	PREALLOC_NORMAL("ST231aMonitor", 0x20200000, 0x20202000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
-	PREALLOC_NORMAL("MediaMemory1", 0x20202000, 0x22000000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * VIDEO2 / LX2
-	 */
-	/* Delta-Mu 2 image (2MiB) */
-	PREALLOC_NORMAL("ST231bImage", 0x30000000, 0x30200000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 2 monitor (8KiB) */
-	PREALLOC_NORMAL("ST231bMonitor", 0x30200000, 0x30202000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 2 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
-	PREALLOC_NORMAL("MediaMemory2", 0x30202000, 0x32000000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * Sysaudio Driver
-	 */
-	/* DSP code and data images (1MiB) */
-	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC CPU PCM buffer (40KiB) */
-	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC AUX buffer (16KiB) */
-	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00004000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC Main buffer (16KiB) */
-	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00004000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * STAVEM driver/STAPI
-	 *
-	 *  This memory area is used for allocating buffers for Video decoding
-	 *  purposes.  Allocation/De-allocation within this buffer is managed
-	 *  by the STAVMEM driver of the STAPI.	 They could be Decimated
-	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
-	 *  video decoding purposes, for any video decoders on Zeus.
-	 */
-	/* 12MiB */
-	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00c00000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * DOCSIS Subsystem
-	 */
-	/* 7MiB */
-	PREALLOC_DOCSIS("Docsis", 0x40100000, 0x40800000-1, IORESOURCE_MEM)
-
-	/*
-	 * GHW HAL Driver
-	 */
-	/* PowerTV Graphics Heap (14MiB) */
-	PREALLOC_NORMAL("GraphicsHeap", 0x46900000, 0x47700000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * multi com buffer area
-	 */
-	/* 128KiB */
-	PREALLOC_NORMAL("MulticomSHM", 0x47900000, 0x47920000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * DMA Ring buffer
-	 */
-	/* 2.5MiB */
-	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x00280000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Display bins buffer for unit0
-	 */
-	/* 4KiB */
-	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Display bins buffer for unit1
-	 */
-	/* 4KiB */
-	PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * ITFS
-	 */
-	/* 815,104 bytes each for 2 ITFS partitions. */
-	PREALLOC_NORMAL("ITFS", 0x00000000, 0x0018E000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * AVFS
-	 */
-	/* (945K * 8) = (128K * 3) 5 playbacks / 3 server */
-	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x007c2000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* 4KiB */
-	PREALLOC_NORMAL("AvfsFileSys", 0x00000000, 0x00001000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * PMEM
-	 */
-	/* Persistent memory for diagnostics (64KiB) */
-	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
-	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Smartcard
-	 */
-	/* Read and write buffers for Internal/External cards (10KiB) */
-	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * TFTPBuffer
-	 *
-	 *  This buffer is used in some minimal configurations (e.g. two-way
-	 *  loader) for storing software images
-	 */
-	PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Add other resources here
-	 */
-
-	/*
-	 * End of Resource marker
-	 */
-	{
-		.flags	= 0,
-	},
-};
-
-/*
- * NON_DVR_CAPABLE ZEUS RESOURCES
- */
-struct resource non_dvr_zeus_resources[] __initdata =
-{
-	/*
-	 * VIDEO1 / LX1
-	 */
-	/* Delta-Mu 1 image (2MiB) */
-	PREALLOC_NORMAL("ST231aImage", 0x20000000, 0x20200000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 monitor (8KiB) */
-	PREALLOC_NORMAL("ST231aMonitor", 0x20200000, 0x20202000-1,
-		IORESOURCE_MEM)
-	/* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
-	PREALLOC_NORMAL("MediaMemory1", 0x20202000, 0x22000000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * Sysaudio Driver
-	 */
-	/* DSP code and data images (1MiB) */
-	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC CPU PCM buffer (40KiB) */
-	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC AUX buffer (16KiB) */
-	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00004000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-	/* ADSC Main buffer (16KiB) */
-	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00004000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * STAVEM driver/STAPI
-	 */
-	/* 6MiB */
-	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00600000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * DOCSIS Subsystem
-	 */
-	/* 7MiB */
-	PREALLOC_DOCSIS("Docsis", 0x40100000, 0x40800000-1, IORESOURCE_MEM)
-
-	/*
-	 * GHW HAL Driver
-	 */
-	/* PowerTV Graphics Heap (14MiB) */
-	PREALLOC_NORMAL("GraphicsHeap", 0x46900000, 0x47700000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * multi com buffer area
-	 */
-	/* 128KiB */
-	PREALLOC_NORMAL("MulticomSHM", 0x47900000, 0x47920000-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * DMA Ring buffer
-	 */
-	/* 2.5MiB */
-	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x00280000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Display bins buffer for unit0
-	 */
-	/* 4KiB */
-	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * AVFS: player HAL memory
-	 */
-	/* 945K * 3 for playback */
-	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * PMEM
-	 */
-	/* Persistent memory for diagnostics (64KiB) */
-	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
-	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Smartcard
-	 */
-	/* Read and write buffers for Internal/External cards (10KiB) */
-	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * NAND Flash
-	 */
-	/* 10KiB */
-	PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
-		IORESOURCE_MEM)
-
-	/*
-	 * TFTPBuffer
-	 *
-	 *  This buffer is used in some minimal configurations (e.g. two-way
-	 *  loader) for storing software images
-	 */
-	PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1,
-		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
-
-	/*
-	 * Add other resources here
-	 */
-
-	/*
-	 * End of Resource marker
-	 */
-	{
-		.flags	= 0,
-	},
-};
diff --git a/arch/mips/powertv/asic/prealloc.h b/arch/mips/powertv/asic/prealloc.h
deleted file mode 100644
index 8e682df..0000000
--- a/arch/mips/powertv/asic/prealloc.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Definitions for memory preallocations
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef _ARCH_MIPS_POWERTV_ASIC_PREALLOC_H
-#define _ARCH_MIPS_POWERTV_ASIC_PREALLOC_H
-
-#define KIBIBYTE(n) ((n) * 1024)    /* Number of kibibytes */
-#define MEBIBYTE(n) ((n) * KIBIBYTE(1024)) /* Number of mebibytes */
-
-/* "struct resource" array element definition */
-#define PREALLOC(NAME, START, END, FLAGS) {	\
-		.name = (NAME),			\
-		.start = (START),		\
-		.end = (END),			\
-		.flags = (FLAGS)		\
-	},
-
-/* Individual resources in the preallocated resource arrays are defined using
- *  macros.  These macros are conditionally defined based on their
- *  corresponding kernel configuration flag:
- *    - CONFIG_PREALLOC_NORMAL: preallocate resources for a normal settop box
- *    - CONFIG_PREALLOC_TFTP: preallocate the TFTP download resource
- *    - CONFIG_PREALLOC_DOCSIS: preallocate the DOCSIS resource
- *    - CONFIG_PREALLOC_PMEM: reserve space for persistent memory
- */
-#ifdef CONFIG_PREALLOC_NORMAL
-#define PREALLOC_NORMAL(name, start, end, flags) \
-   PREALLOC(name, start, end, flags)
-#else
-#define PREALLOC_NORMAL(name, start, end, flags)
-#endif
-
-#ifdef CONFIG_PREALLOC_TFTP
-#define PREALLOC_TFTP(name, start, end, flags) \
-   PREALLOC(name, start, end, flags)
-#else
-#define PREALLOC_TFTP(name, start, end, flags)
-#endif
-
-#ifdef CONFIG_PREALLOC_DOCSIS
-#define PREALLOC_DOCSIS(name, start, end, flags) \
-   PREALLOC(name, start, end, flags)
-#else
-#define PREALLOC_DOCSIS(name, start, end, flags)
-#endif
-
-#ifdef CONFIG_PREALLOC_PMEM
-#define PREALLOC_PMEM(name, start, end, flags) \
-   PREALLOC(name, start, end, flags)
-#else
-#define PREALLOC_PMEM(name, start, end, flags)
-#endif
-#endif
diff --git a/arch/mips/powertv/init.c b/arch/mips/powertv/init.c
deleted file mode 100644
index a01baff..0000000
--- a/arch/mips/powertv/init.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright (C) 1999, 2000, 2004, 2005	 MIPS Technologies, Inc.
- *	All rights reserved.
- *	Authors: Carsten Langgaard <carstenl@mips.com>
- *		 Maciej W. Rozycki <macro@mips.com>
- * Portions copyright (C) 2009 Cisco Systems, Inc.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * PROM library initialisation code.
- */
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-#include <asm/bootinfo.h>
-#include <linux/io.h>
-#include <asm/cacheflush.h>
-#include <asm/traps.h>
-
-#include <asm/mips-boards/generic.h>
-#include <asm/mach-powertv/asic.h>
-
-#include "init.h"
-
-static int *_prom_envp;
-unsigned long _prom_memsize;
-
-/*
- * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
- * This macro take care of sign extension, if running in 64-bit mode.
- */
-#define prom_envp(index) ((char *)(long)_prom_envp[(index)])
-
-char *prom_getenv(char *envname)
-{
-	char *result = NULL;
-
-	if (_prom_envp != NULL) {
-		/*
-		 * Return a pointer to the given environment variable.
-		 * In 64-bit mode: we're using 64-bit pointers, but all pointers
-		 * in the PROM structures are only 32-bit, so we need some
-		 * workarounds, if we are running in 64-bit mode.
-		 */
-		int i, index = 0;
-
-		i = strlen(envname);
-
-		while (prom_envp(index)) {
-			if (strncmp(envname, prom_envp(index), i) == 0) {
-				result = prom_envp(index + 1);
-				break;
-			}
-			index += 2;
-		}
-	}
-
-	return result;
-}
-
-void __init prom_init(void)
-{
-	int prom_argc;
-	char *prom_argv;
-
-	prom_argc = fw_arg0;
-	prom_argv = (char *) fw_arg1;
-	_prom_envp = (int *) fw_arg2;
-	_prom_memsize = (unsigned long) fw_arg3;
-
-	if (prom_argc == 1) {
-		strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
-		strlcat(arcs_cmdline, prom_argv, COMMAND_LINE_SIZE);
-	}
-
-	configure_platform();
-	prom_meminit();
-
-#ifndef CONFIG_BOOTLOADER_DRIVER
-	pr_info("\nBootloader driver isn't loaded...\n");
-#endif
-}
diff --git a/arch/mips/powertv/init.h b/arch/mips/powertv/init.h
deleted file mode 100644
index c1a8bd0..0000000
--- a/arch/mips/powertv/init.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Definitions from powertv init.c file
- *
- * Copyright (C) 2009  Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- * Author: David VomLehn
- */
-
-#ifndef _POWERTV_INIT_H
-#define _POWERTV_INIT_H
-extern unsigned long _prom_memsize;
-extern void prom_meminit(void);
-extern char *prom_getenv(char *name);
-#endif
diff --git a/arch/mips/powertv/ioremap.c b/arch/mips/powertv/ioremap.c
deleted file mode 100644
index d060478..0000000
--- a/arch/mips/powertv/ioremap.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- *			ioremap.c
- *
- * Support for mapping between dma_addr_t values a phys_addr_t values.
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * Author:	 David VomLehn <dvomlehn@cisco.com>
- *
- * Description:	 Defines the platform resources for the SA settop.
- *
- * NOTE: The bootloader allocates persistent memory at an address which is
- * 16 MiB below the end of the highest address in KSEG0. All fixed
- * address memory reservations must avoid this region.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <asm/mach-powertv/ioremap.h>
-
-/*
- * Define the sizes of and masks for grains in physical and DMA space. The
- * values are the same but the types are not.
- */
-#define IOR_PHYS_GRAIN		((phys_addr_t) 1 << IOR_LSBITS)
-#define IOR_PHYS_GRAIN_MASK	(IOR_PHYS_GRAIN - 1)
-
-#define IOR_DMA_GRAIN		((dma_addr_t) 1 << IOR_LSBITS)
-#define IOR_DMA_GRAIN_MASK	(IOR_DMA_GRAIN - 1)
-
-/*
- * Values that, when accessed by an index derived from a phys_addr_t and
- * added to phys_addr_t value, yield a DMA address
- */
-struct ior_phys_to_dma _ior_phys_to_dma[IOR_NUM_PHYS_TO_DMA];
-EXPORT_SYMBOL(_ior_phys_to_dma);
-
-/*
- * Values that, when accessed by an index derived from a dma_addr_t and
- * added to that dma_addr_t value, yield a physical address
- */
-struct ior_dma_to_phys _ior_dma_to_phys[IOR_NUM_DMA_TO_PHYS];
-EXPORT_SYMBOL(_ior_dma_to_phys);
-
-/**
- * setup_dma_to_phys - set up conversion from DMA to physical addresses
- * @dma_idx:	Top IOR_LSBITS bits of the DMA address, i.e. an index
- *		into the array _dma_to_phys.
- * @delta:	Value that, when added to the DMA address, will yield the
- *		physical address
- * @s:		Number of bytes in the section of memory with the given delta
- *		between DMA and physical addresses.
- */
-static void setup_dma_to_phys(dma_addr_t dma, phys_addr_t delta, dma_addr_t s)
-{
-	int dma_idx, first_idx, last_idx;
-	phys_addr_t first, last;
-
-	/*
-	 * Calculate the first and last indices, rounding the first up and
-	 * the second down.
-	 */
-	first = dma & ~IOR_DMA_GRAIN_MASK;
-	last = (dma + s - 1) & ~IOR_DMA_GRAIN_MASK;
-	first_idx = first >> IOR_LSBITS;		/* Convert to indices */
-	last_idx = last >> IOR_LSBITS;
-
-	for (dma_idx = first_idx; dma_idx <= last_idx; dma_idx++)
-		_ior_dma_to_phys[dma_idx].offset = delta >> IOR_DMA_SHIFT;
-}
-
-/**
- * setup_phys_to_dma - set up conversion from DMA to physical addresses
- * @phys_idx:	Top IOR_LSBITS bits of the DMA address, i.e. an index
- *		into the array _phys_to_dma.
- * @delta:	Value that, when added to the DMA address, will yield the
- *		physical address
- * @s:		Number of bytes in the section of memory with the given delta
- *		between DMA and physical addresses.
- */
-static void setup_phys_to_dma(phys_addr_t phys, dma_addr_t delta, phys_addr_t s)
-{
-	int phys_idx, first_idx, last_idx;
-	phys_addr_t first, last;
-
-	/*
-	 * Calculate the first and last indices, rounding the first up and
-	 * the second down.
-	 */
-	first = phys & ~IOR_PHYS_GRAIN_MASK;
-	last = (phys + s - 1) & ~IOR_PHYS_GRAIN_MASK;
-	first_idx = first >> IOR_LSBITS;		/* Convert to indices */
-	last_idx = last >> IOR_LSBITS;
-
-	for (phys_idx = first_idx; phys_idx <= last_idx; phys_idx++)
-		_ior_phys_to_dma[phys_idx].offset = delta >> IOR_PHYS_SHIFT;
-}
-
-/**
- * ioremap_add_map - add to the physical and DMA address conversion arrays
- * @phys:	Process's view of the address of the start of the memory chunk
- * @dma:	DMA address of the start of the memory chunk
- * @size:	Size, in bytes, of the chunk of memory
- *
- * NOTE: It might be obvious, but the assumption is that all @size bytes have
- * the same offset between the physical address and the DMA address.
- */
-void ioremap_add_map(phys_addr_t phys, phys_addr_t dma, phys_addr_t size)
-{
-	if (size == 0)
-		return;
-
-	if ((dma & IOR_DMA_GRAIN_MASK) != 0 ||
-		(phys & IOR_PHYS_GRAIN_MASK) != 0 ||
-		(size & IOR_PHYS_GRAIN_MASK) != 0)
-		pr_crit("Memory allocation must be in chunks of 0x%x bytes\n",
-			IOR_PHYS_GRAIN);
-
-	setup_dma_to_phys(dma, phys - dma, size);
-	setup_phys_to_dma(phys, dma - phys, size);
-}
diff --git a/arch/mips/powertv/memory.c b/arch/mips/powertv/memory.c
deleted file mode 100644
index bc2f3ca..0000000
--- a/arch/mips/powertv/memory.c
+++ /dev/null
@@ -1,353 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
- * Portions copyright (C) 2009 Cisco Systems, Inc.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Apparently originally from arch/mips/malta-memory.c. Modified to work
- * with the PowerTV bootloader.
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/pfn.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-#include <asm/page.h>
-#include <asm/sections.h>
-
-#include <asm/mach-powertv/asic.h>
-#include <asm/mach-powertv/ioremap.h>
-
-#include "init.h"
-
-/* Memory constants */
-#define KIBIBYTE(n)		((n) * 1024)	/* Number of kibibytes */
-#define MEBIBYTE(n)		((n) * KIBIBYTE(1024)) /* Number of mebibytes */
-#define DEFAULT_MEMSIZE		MEBIBYTE(128)	/* If no memsize provided */
-
-#define BLDR_SIZE	KIBIBYTE(256)		/* Memory reserved for bldr */
-#define RV_SIZE		MEBIBYTE(4)		/* Size of reset vector */
-
-#define LOW_MEM_END	0x20000000		/* Highest low memory address */
-#define BLDR_ALIAS	0x10000000		/* Bootloader address */
-#define RV_PHYS		0x1fc00000		/* Reset vector address */
-#define LOW_RAM_END	RV_PHYS			/* End of real RAM in low mem */
-
-/*
- * Very low-level conversion from processor physical address to device
- * DMA address for the first bank of memory.
- */
-#define PHYS_TO_DMA(paddr)	((paddr) + (CONFIG_LOW_RAM_DMA - LOW_RAM_ALIAS))
-
-unsigned long ptv_memsize;
-
-/*
- * struct low_mem_reserved - Items in low memory that are reserved
- * @start:	Physical address of item
- * @size:	Size, in bytes, of this item
- * @is_aliased: True if this is RAM aliased from another location. If false,
- *		it is something other than aliased RAM and the RAM in the
- *		unaliased address is still visible outside of low memory.
- */
-struct low_mem_reserved {
-	phys_addr_t	start;
-	phys_addr_t	size;
-	bool		is_aliased;
-};
-
-/*
- * Must be in ascending address order
- */
-struct low_mem_reserved low_mem_reserved[] = {
-	{BLDR_ALIAS, BLDR_SIZE, true},	/* Bootloader RAM */
-	{RV_PHYS, RV_SIZE, false},	/* Reset vector */
-};
-
-/*
- * struct mem_layout - layout of a piece of the system RAM
- * @phys:	Physical address of the start of this piece of RAM. This is the
- *		address at which both the processor and I/O devices see the
- *		RAM.
- * @alias:	Alias of this piece of memory in order to make it appear in
- *		the low memory part of the processor's address space. I/O
- *		devices don't see anything here.
- * @size:	Size, in bytes, of this piece of RAM
- */
-struct mem_layout {
-	phys_addr_t	phys;
-	phys_addr_t	alias;
-	phys_addr_t	size;
-};
-
-/*
- * struct mem_layout_list - list descriptor for layouts of system RAM pieces
- * @family:	Specifies the family being described
- * @n:		Number of &struct mem_layout elements
- * @layout:	Pointer to the list of &mem_layout structures
- */
-struct mem_layout_list {
-	enum family_type	family;
-	size_t			n;
-	struct mem_layout	*layout;
-};
-
-static struct mem_layout f1500_layout[] = {
-	{0x20000000, 0x10000000, MEBIBYTE(256)},
-};
-
-static struct mem_layout f4500_layout[] = {
-	{0x40000000, 0x10000000, MEBIBYTE(256)},
-	{0x20000000, 0x20000000, MEBIBYTE(32)},
-};
-
-static struct mem_layout f8500_layout[] = {
-	{0x40000000, 0x10000000, MEBIBYTE(256)},
-	{0x20000000, 0x20000000, MEBIBYTE(32)},
-	{0x30000000, 0x30000000, MEBIBYTE(32)},
-};
-
-static struct mem_layout fx600_layout[] = {
-	{0x20000000, 0x10000000, MEBIBYTE(256)},
-	{0x60000000, 0x60000000, MEBIBYTE(128)},
-};
-
-static struct mem_layout_list layout_list[] = {
-	{FAMILY_1500, ARRAY_SIZE(f1500_layout), f1500_layout},
-	{FAMILY_1500VZE, ARRAY_SIZE(f1500_layout), f1500_layout},
-	{FAMILY_1500VZF, ARRAY_SIZE(f1500_layout), f1500_layout},
-	{FAMILY_4500, ARRAY_SIZE(f4500_layout), f4500_layout},
-	{FAMILY_8500, ARRAY_SIZE(f8500_layout), f8500_layout},
-	{FAMILY_8500RNG, ARRAY_SIZE(f8500_layout), f8500_layout},
-	{FAMILY_4600, ARRAY_SIZE(fx600_layout), fx600_layout},
-	{FAMILY_4600VZA, ARRAY_SIZE(fx600_layout), fx600_layout},
-	{FAMILY_8600, ARRAY_SIZE(fx600_layout), fx600_layout},
-	{FAMILY_8600VZB, ARRAY_SIZE(fx600_layout), fx600_layout},
-};
-
-/* If we can't determine the layout, use this */
-static struct mem_layout default_layout[] = {
-	{0x20000000, 0x10000000, MEBIBYTE(128)},
-};
-
-/**
- * register_non_ram - register low memory not available for RAM usage
- */
-static __init void register_non_ram(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(low_mem_reserved); i++)
-		add_memory_region(low_mem_reserved[i].start,
-			low_mem_reserved[i].size, BOOT_MEM_RESERVED);
-}
-
-/**
- * get_memsize - get the size of memory as a single bank
- */
-static phys_addr_t get_memsize(void)
-{
-	static char cmdline[COMMAND_LINE_SIZE] __initdata;
-	phys_addr_t memsize = 0;
-	char *memsize_str;
-	char *ptr;
-
-	/* Check the command line first for a memsize directive */
-	strcpy(cmdline, arcs_cmdline);
-	ptr = strstr(cmdline, "memsize=");
-	if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
-		ptr = strstr(ptr, " memsize=");
-
-	if (ptr) {
-		memsize = memparse(ptr + 8, &ptr);
-	} else {
-		/* otherwise look in the environment */
-		memsize_str = prom_getenv("memsize");
-
-		if (memsize_str != NULL) {
-			pr_info("prom memsize = %s\n", memsize_str);
-			memsize = simple_strtol(memsize_str, NULL, 0);
-		}
-
-		if (memsize == 0) {
-			if (_prom_memsize != 0) {
-				memsize = _prom_memsize;
-				pr_info("_prom_memsize = 0x%x\n", memsize);
-				/* add in memory that the bootloader doesn't
-				 * report */
-				memsize += BLDR_SIZE;
-			} else {
-				memsize = DEFAULT_MEMSIZE;
-				pr_info("Memsize not passed by bootloader, "
-					"defaulting to 0x%x\n", memsize);
-			}
-		}
-	}
-
-	return memsize;
-}
-
-/**
- * register_low_ram - register an aliased section of RAM
- * @p:		Alias address of memory
- * @n:		Number of bytes in this section of memory
- *
- * Returns the number of bytes registered
- *
- */
-static __init phys_addr_t register_low_ram(phys_addr_t p, phys_addr_t n)
-{
-	phys_addr_t s;
-	int i;
-	phys_addr_t orig_n;
-
-	orig_n = n;
-
-	BUG_ON(p + n > RV_PHYS);
-
-	for (i = 0; n != 0 && i < ARRAY_SIZE(low_mem_reserved); i++) {
-		phys_addr_t start;
-		phys_addr_t size;
-
-		start = low_mem_reserved[i].start;
-		size = low_mem_reserved[i].size;
-
-		/* Handle memory before this low memory section */
-		if (p < start) {
-			phys_addr_t s;
-			s = min(n, start - p);
-			add_memory_region(p, s, BOOT_MEM_RAM);
-			p += s;
-			n -= s;
-		}
-
-		/* Handle the low memory section itself. If it's aliased,
-		 * we reduce the number of byes left, but if not, the RAM
-		 * is available elsewhere and we don't reduce the number of
-		 * bytes remaining. */
-		if (p == start) {
-			if (low_mem_reserved[i].is_aliased) {
-				s = min(n, size);
-				n -= s;
-				p += s;
-			} else
-				p += n;
-		}
-	}
-
-	return orig_n - n;
-}
-
-/*
- * register_ram - register real RAM
- * @p:	Address of memory as seen by devices
- * @alias:	If the memory is seen at an additional address by the processor,
- *		this will be the address, otherwise it is the same as @p.
- * @n:		Number of bytes in this section of memory
- */
-static __init void register_ram(phys_addr_t p, phys_addr_t alias,
-	phys_addr_t n)
-{
-	/*
-	 * If some or all of this memory has an alias, break it into the
-	 * aliased and non-aliased portion.
-	 */
-	if (p != alias) {
-		phys_addr_t alias_size;
-		phys_addr_t registered;
-
-		alias_size = min(n, LOW_RAM_END - alias);
-		registered = register_low_ram(alias, alias_size);
-		ioremap_add_map(alias, p, n);
-		n -= registered;
-		p += registered;
-	}
-
-#ifdef CONFIG_HIGHMEM
-	if (n != 0) {
-		add_memory_region(p, n, BOOT_MEM_RAM);
-		ioremap_add_map(p, p, n);
-	}
-#endif
-}
-
-/**
- * register_address_space - register things in the address space
- * @memsize:	Number of bytes of RAM installed
- *
- * Takes the given number of bytes of RAM and registers as many of the regions,
- * or partial regions, as it can. So, the default configuration might have
- * two regions with 256 MiB each. If the memsize passed in on the command line
- * is 384 MiB, it will register the first region with 256 MiB and the second
- * with 128 MiB.
- */
-static __init void register_address_space(phys_addr_t memsize)
-{
-	int i;
-	phys_addr_t size;
-	size_t n;
-	struct mem_layout *layout;
-	enum family_type family;
-
-	/*
-	 * Register all of the things that aren't available to the kernel as
-	 * memory.
-	 */
-	register_non_ram();
-
-	/* Find the appropriate memory description */
-	family = platform_get_family();
-
-	for (i = 0; i < ARRAY_SIZE(layout_list); i++) {
-		if (layout_list[i].family == family)
-			break;
-	}
-
-	if (i == ARRAY_SIZE(layout_list)) {
-		n = ARRAY_SIZE(default_layout);
-		layout = default_layout;
-	} else {
-		n = layout_list[i].n;
-		layout = layout_list[i].layout;
-	}
-
-	for (i = 0; memsize != 0 && i < n; i++) {
-		size = min(memsize, layout[i].size);
-		register_ram(layout[i].phys, layout[i].alias, size);
-		memsize -= size;
-	}
-}
-
-void __init prom_meminit(void)
-{
-	ptv_memsize = get_memsize();
-	register_address_space(ptv_memsize);
-}
-
-void __init prom_free_prom_memory(void)
-{
-	unsigned long addr;
-	int i;
-
-	for (i = 0; i < boot_mem_map.nr_map; i++) {
-		if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
-			continue;
-
-		addr = boot_mem_map.map[i].addr;
-		free_init_pages("prom memory",
-				addr, addr + boot_mem_map.map[i].size);
-	}
-}
diff --git a/arch/mips/powertv/pci/Makefile b/arch/mips/powertv/pci/Makefile
deleted file mode 100644
index 2610a6a..0000000
--- a/arch/mips/powertv/pci/Makefile
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# Copyright (C) 2009  Scientific-Atlanta, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-#
-
-obj-$(CONFIG_PCI)	+= fixup-powertv.o
diff --git a/arch/mips/powertv/pci/fixup-powertv.c b/arch/mips/powertv/pci/fixup-powertv.c
deleted file mode 100644
index d7ecbae..0000000
--- a/arch/mips/powertv/pci/fixup-powertv.c
+++ /dev/null
@@ -1,37 +0,0 @@
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/pci.h>
-#include <asm/mach-powertv/interrupts.h>
-#include "powertv-pci.h"
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	return asic_pcie_map_irq(dev, slot, pin);
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}
-
-/*
- * asic_pcie_map_irq
- *
- * Parameters:
- * *dev - pointer to a pci_dev structure  (not used)
- * slot - slot number  (not used)
- * pin - pin number  (not used)
- *
- * Return Value:
- * Returns: IRQ number (always the PCI Express IRQ number)
- *
- * Description:
- * asic_pcie_map_irq will return the IRQ number of the PCI Express interrupt.
- *
- */
-int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	return irq_pciexp;
-}
-EXPORT_SYMBOL(asic_pcie_map_irq);
diff --git a/arch/mips/powertv/powertv-clock.h b/arch/mips/powertv/powertv-clock.h
deleted file mode 100644
index d94c543..0000000
--- a/arch/mips/powertv/powertv-clock.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 2009  Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- * Author: David VomLehn
- */
-
-#ifndef _POWERTV_POWERTV_CLOCK_H
-#define _POWERTV_POWERTV_CLOCK_H
-extern int powertv_clockevent_init(void);
-extern void powertv_clocksource_init(void);
-extern unsigned int mips_get_pll_freq(void);
-#endif
diff --git a/arch/mips/powertv/powertv-usb.c b/arch/mips/powertv/powertv-usb.c
deleted file mode 100644
index d845eac..0000000
--- a/arch/mips/powertv/powertv-usb.c
+++ /dev/null
@@ -1,404 +0,0 @@
-/*
- *				powertv-usb.c
- *
- * Description:	 ASIC-specific USB device setup and shutdown
- *
- * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
- * Copyright (C) 2009 Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * Author:	 Ken Eppinett
- *		 David Schleef <ds@schleef.org>
- *
- * NOTE: The bootloader allocates persistent memory at an address which is
- * 16 MiB below the end of the highest address in KSEG0. All fixed
- * address memory reservations must avoid this region.
- */
-
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <asm/mach-powertv/asic.h>
-#include <asm/mach-powertv/interrupts.h>
-
-/* misc_clk_ctl1 values */
-#define MCC1_30MHZ_POWERUP_SELECT	(1 << 14)
-#define MCC1_DIV9			(1 << 13)
-#define MCC1_ETHMIPS_POWERUP_SELECT	(1 << 11)
-#define MCC1_USB_POWERUP_SELECT		(1 << 1)
-#define MCC1_CLOCK108_POWERUP_SELECT	(1 << 0)
-
-/* Possible values for clock select */
-#define MCC1_USB_CLOCK_HIGH_Z		(0 << 4)
-#define MCC1_USB_CLOCK_48MHZ		(1 << 4)
-#define MCC1_USB_CLOCK_24MHZ		(2 << 4)
-#define MCC1_USB_CLOCK_6MHZ		(3 << 4)
-
-#define MCC1_CONFIG	(MCC1_30MHZ_POWERUP_SELECT |		\
-			 MCC1_DIV9 |				\
-			 MCC1_ETHMIPS_POWERUP_SELECT |		\
-			 MCC1_USB_POWERUP_SELECT |		\
-			 MCC1_CLOCK108_POWERUP_SELECT)
-
-/* misc_clk_ctl2 values */
-#define MCC2_GMII_GCLK_TO_PAD		(1 << 31)
-#define MCC2_ETHER125_0_CLOCK_SELECT	(1 << 29)
-#define MCC2_RMII_0_CLOCK_SELECT	(1 << 28)
-#define MCC2_GMII_TX0_CLOCK_SELECT	(1 << 27)
-#define MCC2_GMII_RX0_CLOCK_SELECT	(1 << 26)
-#define MCC2_ETHER125_1_CLOCK_SELECT	(1 << 24)
-#define MCC2_RMII_1_CLOCK_SELECT	(1 << 23)
-#define MCC2_GMII_TX1_CLOCK_SELECT	(1 << 22)
-#define MCC2_GMII_RX1_CLOCK_SELECT	(1 << 21)
-#define MCC2_ETHER125_2_CLOCK_SELECT	(1 << 19)
-#define MCC2_RMII_2_CLOCK_SELECT	(1 << 18)
-#define MCC2_GMII_TX2_CLOCK_SELECT	(1 << 17)
-#define MCC2_GMII_RX2_CLOCK_SELECT	(1 << 16)
-
-#define ETHER_CLK_CONFIG	(MCC2_GMII_GCLK_TO_PAD |	\
-				 MCC2_ETHER125_0_CLOCK_SELECT | \
-				 MCC2_RMII_0_CLOCK_SELECT |	\
-				 MCC2_GMII_TX0_CLOCK_SELECT |	\
-				 MCC2_GMII_RX0_CLOCK_SELECT |	\
-				 MCC2_ETHER125_1_CLOCK_SELECT | \
-				 MCC2_RMII_1_CLOCK_SELECT |	\
-				 MCC2_GMII_TX1_CLOCK_SELECT |	\
-				 MCC2_GMII_RX1_CLOCK_SELECT |	\
-				 MCC2_ETHER125_2_CLOCK_SELECT | \
-				 MCC2_RMII_2_CLOCK_SELECT |	\
-				 MCC2_GMII_TX2_CLOCK_SELECT |	\
-				 MCC2_GMII_RX2_CLOCK_SELECT)
-
-/* misc_clk_ctl2 definitions for Gaia */
-#define FSX4A_REF_SELECT		(1 << 16)
-#define FSX4B_REF_SELECT		(1 << 17)
-#define FSX4C_REF_SELECT		(1 << 18)
-#define DDR_PLL_REF_SELECT		(1 << 19)
-#define MIPS_PLL_REF_SELECT		(1 << 20)
-
-/* Definitions for the QAM frequency select register FS432X4A4_QAM_CTL */
-#define QAM_FS_SDIV_SHIFT		29
-#define QAM_FS_MD_SHIFT			24
-#define QAM_FS_MD_MASK			0x1f	/* Cut down to 5 bits */
-#define QAM_FS_PE_SHIFT			8
-
-#define QAM_FS_DISABLE_DIVIDE_BY_3		(1 << 5)
-#define QAM_FS_ENABLE_PROGRAM			(1 << 4)
-#define QAM_FS_ENABLE_OUTPUT			(1 << 3)
-#define QAM_FS_SELECT_TEST_BYPASS		(1 << 2)
-#define QAM_FS_DISABLE_DIGITAL_STANDBY		(1 << 1)
-#define QAM_FS_CHOOSE_FS			(1 << 0)
-
-/* Definitions for fs432x4a_ctl register */
-#define QAM_FS_NSDIV_54MHZ			(1 << 2)
-
-/* Definitions for bcm1_usb2_ctl register */
-#define BCM1_USB2_CTL_BISTOK				(1 << 11)
-#define BCM1_USB2_CTL_PORT2_SHIFT_JK			(1 << 7)
-#define BCM1_USB2_CTL_PORT1_SHIFT_JK			(1 << 6)
-#define BCM1_USB2_CTL_PORT2_FAST_EDGE			(1 << 5)
-#define BCM1_USB2_CTL_PORT1_FAST_EDGE			(1 << 4)
-#define BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH		(1 << 1)
-#define BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH	(1 << 0)
-
-/* Definitions for crt_spare register */
-#define CRT_SPARE_PORT2_SHIFT_JK			(1 << 21)
-#define CRT_SPARE_PORT1_SHIFT_JK			(1 << 20)
-#define CRT_SPARE_PORT2_FAST_EDGE			(1 << 19)
-#define CRT_SPARE_PORT1_FAST_EDGE			(1 << 18)
-#define CRT_SPARE_DIVIDE_BY_9_FROM_432			(1 << 17)
-#define CRT_SPARE_USB_DIVIDE_BY_9			(1 << 16)
-
-/* Definitions for usb2_stbus_obc register */
-#define USB_STBUS_OBC_STORE32_LOAD32			0x3
-
-/* Definitions for usb2_stbus_mess_size register */
-#define USB2_STBUS_MESS_SIZE_2				0x1	/* 2 packets */
-
-/* Definitions for usb2_stbus_chunk_size register */
-#define USB2_STBUS_CHUNK_SIZE_2				0x1	/* 2 packets */
-
-/* Definitions for usb2_strap register */
-#define USB2_STRAP_HFREQ_SELECT				0x1
-
-/*
- * USB Host Resource Definition
- */
-
-static struct resource ehci_resources[] = {
-	{
-		.parent = &asic_resource,
-		.start	= 0,
-		.end	= 0xff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= irq_usbehci,
-		.end	= irq_usbehci,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 ehci_dmamask = 0xffffffffULL;
-
-static struct platform_device ehci_device = {
-	.name = "powertv-ehci",
-	.id = 0,
-	.num_resources = 2,
-	.resource = ehci_resources,
-	.dev = {
-		.dma_mask = &ehci_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-static struct resource ohci_resources[] = {
-	{
-		.parent = &asic_resource,
-		.start	= 0,
-		.end	= 0xff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= irq_usbohci,
-		.end	= irq_usbohci,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 ohci_dmamask = 0xffffffffULL;
-
-static struct platform_device ohci_device = {
-	.name = "powertv-ohci",
-	.id = 0,
-	.num_resources = 2,
-	.resource = ohci_resources,
-	.dev = {
-		.dma_mask = &ohci_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-static unsigned usb_users;
-static DEFINE_SPINLOCK(usb_regs_lock);
-
-/*
- *
- * fs_update - set frequency synthesizer for USB
- * @pe_bits		Phase tap setting
- * @md_bits		Coarse selector bus for algorithm of phase tap
- * @sdiv_bits		Output divider setting
- * @disable_div_by_3	Either QAM_FS_DISABLE_DIVIDE_BY_3 or zero
- * @standby		Either QAM_FS_DISABLE_DIGITAL_STANDBY or zero
- *
- * QAM frequency selection code, which affects the frequency at which USB
- * runs. The frequency is calculated as:
- *			       2^15 * ndiv * Fin
- * Fout = ------------------------------------------------------------
- *	  (sdiv * (ipe * (1 + md/32) - (ipe - 2^15)*(1 + (md + 1)/32)))
- * where:
- * Fin		54 MHz
- * ndiv		QAM_FS_NSDIV_54MHZ ? 8 : 16
- * sdiv		1 << (sdiv_bits + 1)
- * ipe		Same as pe_bits
- * md		A five-bit, two's-complement integer (range [-16, 15]), which
- *		is the lower 5 bits of md_bits.
- */
-static void fs_update(u32 pe_bits, int md_bits, u32 sdiv_bits,
-	u32 disable_div_by_3, u32 standby)
-{
-	u32 val;
-
-	val = ((sdiv_bits << QAM_FS_SDIV_SHIFT) |
-		((md_bits & QAM_FS_MD_MASK) << QAM_FS_MD_SHIFT) |
-		(pe_bits << QAM_FS_PE_SHIFT) |
-		QAM_FS_ENABLE_OUTPUT |
-		standby |
-		disable_div_by_3);
-	asic_write(val, fs432x4b4_usb_ctl);
-	asic_write(val | QAM_FS_ENABLE_PROGRAM, fs432x4b4_usb_ctl);
-	asic_write(val | QAM_FS_ENABLE_PROGRAM | QAM_FS_CHOOSE_FS,
-		fs432x4b4_usb_ctl);
-}
-
-/*
- * usb_eye_configure - for optimizing the shape USB eye waveform
- * @set:	Bits to set in the register
- * @clear:	Bits to clear in the register; each bit with a one will
- *		be set in the register, zero bits will not be modified
- */
-static void usb_eye_configure(u32 set, u32 clear)
-{
-	u32 old;
-
-	old = asic_read(crt_spare);
-	old |= set;
-	old &= ~clear;
-	asic_write(old, crt_spare);
-}
-
-/*
- * platform_configure_usb - usb configuration based on platform type.
- */
-static void platform_configure_usb(void)
-{
-	u32 bcm1_usb2_ctl_value;
-	enum asic_type asic_type;
-	unsigned long flags;
-
-	spin_lock_irqsave(&usb_regs_lock, flags);
-	usb_users++;
-
-	if (usb_users != 1) {
-		spin_unlock_irqrestore(&usb_regs_lock, flags);
-		return;
-	}
-
-	asic_type = platform_get_asic();
-
-	switch (asic_type) {
-	case ASIC_ZEUS:
-		fs_update(0x0000, -15, 0x02, 0, 0);
-		bcm1_usb2_ctl_value = BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |
-			BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;
-		break;
-
-	case ASIC_CRONUS:
-	case ASIC_CRONUSLITE:
-		usb_eye_configure(0, CRT_SPARE_USB_DIVIDE_BY_9);
-		fs_update(0x8000, -14, 0x03, QAM_FS_DISABLE_DIVIDE_BY_3,
-			QAM_FS_DISABLE_DIGITAL_STANDBY);
-		bcm1_usb2_ctl_value = BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |
-			BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;
-		break;
-
-	case ASIC_CALLIOPE:
-		fs_update(0x0000, -15, 0x02, QAM_FS_DISABLE_DIVIDE_BY_3,
-			QAM_FS_DISABLE_DIGITAL_STANDBY);
-
-		switch (platform_get_family()) {
-		case FAMILY_1500VZE:
-			break;
-
-		case FAMILY_1500VZF:
-			usb_eye_configure(CRT_SPARE_PORT2_SHIFT_JK |
-				CRT_SPARE_PORT1_SHIFT_JK |
-				CRT_SPARE_PORT2_FAST_EDGE |
-				CRT_SPARE_PORT1_FAST_EDGE, 0);
-			break;
-
-		default:
-			usb_eye_configure(CRT_SPARE_PORT2_SHIFT_JK |
-				CRT_SPARE_PORT1_SHIFT_JK, 0);
-			break;
-		}
-
-		bcm1_usb2_ctl_value = BCM1_USB2_CTL_BISTOK |
-			BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |
-			BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;
-		break;
-
-	case ASIC_GAIA:
-		fs_update(0x8000, -14, 0x03, QAM_FS_DISABLE_DIVIDE_BY_3,
-			QAM_FS_DISABLE_DIGITAL_STANDBY);
-		bcm1_usb2_ctl_value = BCM1_USB2_CTL_BISTOK |
-			BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |
-			BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;
-		break;
-
-	default:
-		pr_err("Unknown ASIC type: %d\n", asic_type);
-		bcm1_usb2_ctl_value = 0;
-		break;
-	}
-
-	/* turn on USB power */
-	asic_write(0, usb2_strap);
-	/* Enable all OHCI interrupts */
-	asic_write(bcm1_usb2_ctl_value, usb2_control);
-	/* usb2_stbus_obc store32/load32 */
-	asic_write(USB_STBUS_OBC_STORE32_LOAD32, usb2_stbus_obc);
-	/* usb2_stbus_mess_size 2 packets */
-	asic_write(USB2_STBUS_MESS_SIZE_2, usb2_stbus_mess_size);
-	/* usb2_stbus_chunk_size 2 packets */
-	asic_write(USB2_STBUS_CHUNK_SIZE_2, usb2_stbus_chunk_size);
-	spin_unlock_irqrestore(&usb_regs_lock, flags);
-}
-
-static void platform_unconfigure_usb(void)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&usb_regs_lock, flags);
-	usb_users--;
-	if (usb_users == 0)
-		asic_write(USB2_STRAP_HFREQ_SELECT, usb2_strap);
-	spin_unlock_irqrestore(&usb_regs_lock, flags);
-}
-
-/*
- * Set up the USB EHCI interface
- */
-void platform_configure_usb_ehci()
-{
-	platform_configure_usb();
-}
-EXPORT_SYMBOL(platform_configure_usb_ehci);
-
-/*
- * Set up the USB OHCI interface
- */
-void platform_configure_usb_ohci()
-{
-	platform_configure_usb();
-}
-EXPORT_SYMBOL(platform_configure_usb_ohci);
-
-/*
- * Shut the USB EHCI interface down
- */
-void platform_unconfigure_usb_ehci()
-{
-	platform_unconfigure_usb();
-}
-EXPORT_SYMBOL(platform_unconfigure_usb_ehci);
-
-/*
- * Shut the USB OHCI interface down
- */
-void platform_unconfigure_usb_ohci()
-{
-	platform_unconfigure_usb();
-}
-EXPORT_SYMBOL(platform_unconfigure_usb_ohci);
-
-/**
- * platform_devices_init - sets up USB device resourse.
- */
-int __init platform_usb_devices_init(struct platform_device **ehci_dev,
-	struct platform_device **ohci_dev)
-{
-	*ehci_dev = &ehci_device;
-	ehci_resources[0].start = asic_reg_phys_addr(ehci_hcapbase);
-	ehci_resources[0].end += ehci_resources[0].start;
-
-	*ohci_dev = &ohci_device;
-	ohci_resources[0].start = asic_reg_phys_addr(ohci_hc_revision);
-	ohci_resources[0].end += ohci_resources[0].start;
-
-	return 0;
-}
diff --git a/arch/mips/powertv/powertv_setup.c b/arch/mips/powertv/powertv_setup.c
deleted file mode 100644
index 24689bf..0000000
--- a/arch/mips/powertv/powertv_setup.c
+++ /dev/null
@@ -1,319 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- * Portions copyright (C) 2009 Cisco Systems, Inc.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/screen_info.h>
-#include <linux/notifier.h>
-#include <linux/etherdevice.h>
-#include <linux/if_ether.h>
-#include <linux/ctype.h>
-#include <linux/cpu.h>
-#include <linux/time.h>
-
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mips-boards/generic.h>
-#include <asm/dma.h>
-#include <asm/asm.h>
-#include <asm/traps.h>
-#include <asm/asm-offsets.h>
-#include "reset.h"
-
-#define VAL(n)		STR(n)
-
-/*
- * Macros for loading addresses and storing registers:
- * LONG_L_	Stringified version of LONG_L for use in asm() statement
- * LONG_S_	Stringified version of LONG_S for use in asm() statement
- * PTR_LA_	Stringified version of PTR_LA for use in asm() statement
- * REG_SIZE	Number of 8-bit bytes in a full width register
- */
-#define LONG_L_		VAL(LONG_L) " "
-#define LONG_S_		VAL(LONG_S) " "
-#define PTR_LA_		VAL(PTR_LA) " "
-
-#ifdef CONFIG_64BIT
-#warning TODO: 64-bit code needs to be verified
-#define REG_SIZE	"8"		/* In bytes */
-#endif
-
-#ifdef CONFIG_32BIT
-#define REG_SIZE	"4"		/* In bytes */
-#endif
-
-static void register_panic_notifier(void);
-static int panic_handler(struct notifier_block *notifier_block,
-	unsigned long event, void *cause_string);
-
-const char *get_system_type(void)
-{
-	return "PowerTV";
-}
-
-void __init plat_mem_setup(void)
-{
-	panic_on_oops = 1;
-	register_panic_notifier();
-
-#if 0
-	mips_pcibios_init();
-#endif
-	mips_reboot_setup();
-}
-
-/*
- * Install a panic notifier for platform-specific diagnostics
- */
-static void register_panic_notifier()
-{
-	static struct notifier_block panic_notifier = {
-		.notifier_call = panic_handler,
-		.next = NULL,
-		.priority	= INT_MAX
-	};
-	atomic_notifier_chain_register(&panic_notifier_list, &panic_notifier);
-}
-
-static int panic_handler(struct notifier_block *notifier_block,
-	unsigned long event, void *cause_string)
-{
-	struct pt_regs	my_regs;
-
-	/* Save all of the registers */
-	{
-		unsigned long	at, v0, v1; /* Must be on the stack */
-
-		/* Start by saving $at and v0 on the stack. We use $at
-		 * ourselves, but it looks like the compiler may use v0 or v1
-		 * to load the address of the pt_regs structure. We'll come
-		 * back later to store the registers in the pt_regs
-		 * structure. */
-		__asm__ __volatile__ (
-			".set	noat\n"
-			LONG_S_		"$at, %[at]\n"
-			LONG_S_		"$2, %[v0]\n"
-			LONG_S_		"$3, %[v1]\n"
-		:
-			[at] "=m" (at),
-			[v0] "=m" (v0),
-			[v1] "=m" (v1)
-		:
-		:	"at"
-		);
-
-		__asm__ __volatile__ (
-			".set	noat\n"
-			"move		$at, %[pt_regs]\n"
-
-			/* Argument registers */
-			LONG_S_		"$4, " VAL(PT_R4) "($at)\n"
-			LONG_S_		"$5, " VAL(PT_R5) "($at)\n"
-			LONG_S_		"$6, " VAL(PT_R6) "($at)\n"
-			LONG_S_		"$7, " VAL(PT_R7) "($at)\n"
-
-			/* Temporary regs */
-			LONG_S_		"$8, " VAL(PT_R8) "($at)\n"
-			LONG_S_		"$9, " VAL(PT_R9) "($at)\n"
-			LONG_S_		"$10, " VAL(PT_R10) "($at)\n"
-			LONG_S_		"$11, " VAL(PT_R11) "($at)\n"
-			LONG_S_		"$12, " VAL(PT_R12) "($at)\n"
-			LONG_S_		"$13, " VAL(PT_R13) "($at)\n"
-			LONG_S_		"$14, " VAL(PT_R14) "($at)\n"
-			LONG_S_		"$15, " VAL(PT_R15) "($at)\n"
-
-			/* "Saved" registers */
-			LONG_S_		"$16, " VAL(PT_R16) "($at)\n"
-			LONG_S_		"$17, " VAL(PT_R17) "($at)\n"
-			LONG_S_		"$18, " VAL(PT_R18) "($at)\n"
-			LONG_S_		"$19, " VAL(PT_R19) "($at)\n"
-			LONG_S_		"$20, " VAL(PT_R20) "($at)\n"
-			LONG_S_		"$21, " VAL(PT_R21) "($at)\n"
-			LONG_S_		"$22, " VAL(PT_R22) "($at)\n"
-			LONG_S_		"$23, " VAL(PT_R23) "($at)\n"
-
-			/* Add'l temp regs */
-			LONG_S_		"$24, " VAL(PT_R24) "($at)\n"
-			LONG_S_		"$25, " VAL(PT_R25) "($at)\n"
-
-			/* Kernel temp regs */
-			LONG_S_		"$26, " VAL(PT_R26) "($at)\n"
-			LONG_S_		"$27, " VAL(PT_R27) "($at)\n"
-
-			/* Global pointer, stack pointer, frame pointer and
-			 * return address */
-			LONG_S_		"$gp, " VAL(PT_R28) "($at)\n"
-			LONG_S_		"$sp, " VAL(PT_R29) "($at)\n"
-			LONG_S_		"$fp, " VAL(PT_R30) "($at)\n"
-			LONG_S_		"$ra, " VAL(PT_R31) "($at)\n"
-
-			/* Now we can get the $at and v0 registers back and
-			 * store them */
-			LONG_L_		"$8, %[at]\n"
-			LONG_S_		"$8, " VAL(PT_R1) "($at)\n"
-			LONG_L_		"$8, %[v0]\n"
-			LONG_S_		"$8, " VAL(PT_R2) "($at)\n"
-			LONG_L_		"$8, %[v1]\n"
-			LONG_S_		"$8, " VAL(PT_R3) "($at)\n"
-		:
-		:
-			[at] "m" (at),
-			[v0] "m" (v0),
-			[v1] "m" (v1),
-			[pt_regs] "r" (&my_regs)
-		:	"at", "t0"
-		);
-
-		/* Set the current EPC value to be the current location in this
-		 * function */
-		__asm__ __volatile__ (
-			".set	noat\n"
-		"1:\n"
-			PTR_LA_		"$at, 1b\n"
-			LONG_S_		"$at, %[cp0_epc]\n"
-		:
-			[cp0_epc] "=m" (my_regs.cp0_epc)
-		:
-		:	"at"
-		);
-
-		my_regs.cp0_cause = read_c0_cause();
-		my_regs.cp0_status = read_c0_status();
-	}
-
-	pr_crit("I'm feeling a bit sleepy. hmmmmm... perhaps a nap would... "
-		"zzzz... \n");
-
-	return NOTIFY_DONE;
-}
-
-/* Information about the RF MAC address, if one was supplied on the
- * command line. */
-static bool have_rfmac;
-static u8 rfmac[ETH_ALEN];
-
-static int rfmac_param(char *p)
-{
-	u8	*q;
-	bool	is_high_nibble;
-	int	c;
-
-	/* Skip a leading "0x", if present */
-	if (*p == '0' && *(p+1) == 'x')
-		p += 2;
-
-	q = rfmac;
-	is_high_nibble = true;
-
-	for (c = (unsigned char) *p++;
-		isxdigit(c) && q - rfmac < ETH_ALEN;
-		c = (unsigned char) *p++) {
-		int	nibble;
-
-		nibble = (isdigit(c) ? (c - '0') :
-			(isupper(c) ? c - 'A' + 10 : c - 'a' + 10));
-
-		if (is_high_nibble)
-			*q = nibble << 4;
-		else
-			*q++ |= nibble;
-
-		is_high_nibble = !is_high_nibble;
-	}
-
-	/* If we parsed all the way to the end of the parameter value and
-	 * parsed all ETH_ALEN bytes, we have a usable RF MAC address */
-	have_rfmac = (c == '\0' && q - rfmac == ETH_ALEN);
-
-	return 0;
-}
-
-early_param("rfmac", rfmac_param);
-
-/*
- * Generate an Ethernet MAC address that has a good chance of being unique.
- * @addr:	Pointer to six-byte array containing the Ethernet address
- * Generates an Ethernet MAC address that is highly likely to be unique for
- * this particular system on a network with other systems of the same type.
- *
- * The problem we are solving is that, when eth_random_addr() is used to
- * generate MAC addresses at startup, there isn't much entropy for the random
- * number generator to use and the addresses it produces are fairly likely to
- * be the same as those of other identical systems on the same local network.
- * This is true even for relatively small numbers of systems (for the reason
- * why, see the Wikipedia entry for "Birthday problem" at:
- *	http://en.wikipedia.org/wiki/Birthday_problem
- *
- * The good news is that we already have a MAC address known to be unique, the
- * RF MAC address. The bad news is that this address is already in use on the
- * RF interface. Worse, the obvious trick, taking the RF MAC address and
- * turning on the locally managed bit, has already been used for other devices.
- * Still, this does give us something to work with.
- *
- * The approach we take is:
- * 1.	If we can't get the RF MAC Address, just call eth_random_addr.
- * 2.	Use the 24-bit NIC-specific bits of the RF MAC address as the last 24
- *	bits of the new address. This is very likely to be unique, except for
- *	the current box.
- * 3.	To avoid using addresses already on the current box, we set the top
- *	six bits of the address with a value different from any currently
- *	registered Scientific Atlanta organizationally unique identifyer
- *	(OUI). This avoids duplication with any addresses on the system that
- *	were generated from valid Scientific Atlanta-registered address by
- *	simply flipping the locally managed bit.
- * 4.	We aren't generating a multicast address, so we leave the multicast
- *	bit off. Since we aren't using a registered address, we have to set
- *	the locally managed bit.
- * 5.	We then randomly generate the remaining 16-bits. This does two
- *	things:
- *	a.	It allows us to call this function for more than one device
- *		in this system
- *	b.	It ensures that things will probably still work even if
- *		some device on the device network has a locally managed
- *		address that matches the top six bits from step 2.
- */
-void platform_random_ether_addr(u8 addr[ETH_ALEN])
-{
-	const int num_random_bytes = 2;
-	const unsigned char non_sciatl_oui_bits = 0xc0u;
-	const unsigned char mac_addr_locally_managed = (1 << 1);
-
-	if (!have_rfmac) {
-		pr_warning("rfmac not available on command line; "
-			"generating random MAC address\n");
-		eth_random_addr(addr);
-	}
-
-	else {
-		int	i;
-
-		/* Set the first byte to something that won't match a Scientific
-		 * Atlanta OUI, is locally managed, and isn't a multicast
-		 * address */
-		addr[0] = non_sciatl_oui_bits | mac_addr_locally_managed;
-
-		/* Get some bytes of random address information */
-		get_random_bytes(&addr[1], num_random_bytes);
-
-		/* Copy over the NIC-specific bits of the RF MAC address */
-		for (i = 1 + num_random_bytes; i < ETH_ALEN; i++)
-			addr[i] = rfmac[i];
-	}
-}
diff --git a/arch/mips/powertv/reset.c b/arch/mips/powertv/reset.c
deleted file mode 100644
index 0007652..0000000
--- a/arch/mips/powertv/reset.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
- * Portions copyright (C) 2009 Cisco Systems, Inc.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/pm.h>
-
-#include <linux/io.h>
-#include <asm/reboot.h>			/* Not included by linux/reboot.h */
-
-#ifdef CONFIG_BOOTLOADER_DRIVER
-#include <asm/mach-powertv/kbldr.h>
-#endif
-
-#include <asm/mach-powertv/asic_regs.h>
-#include "reset.h"
-
-static void mips_machine_restart(char *command)
-{
-#ifdef CONFIG_BOOTLOADER_DRIVER
-	/*
-	 * Call the bootloader's reset function to ensure
-	 * that persistent data is flushed before hard reset
-	 */
-	kbldr_SetCauseAndReset();
-#else
-	writel(0x1, asic_reg_addr(watchdog));
-#endif
-}
-
-void mips_reboot_setup(void)
-{
-	_machine_restart = mips_machine_restart;
-}
diff --git a/arch/mips/powertv/reset.h b/arch/mips/powertv/reset.h
deleted file mode 100644
index 888fd09..0000000
--- a/arch/mips/powertv/reset.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Definitions from powertv reset.c file
- *
- * Copyright (C) 2009  Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- * Author: David VomLehn
- */
-
-#ifndef _POWERTV_POWERTV_RESET_H
-#define _POWERTV_POWERTV_RESET_H
-extern void mips_reboot_setup(void);
-#endif
diff --git a/arch/mips/powertv/time.c b/arch/mips/powertv/time.c
deleted file mode 100644
index f38b0d4..0000000
--- a/arch/mips/powertv/time.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
- * Portions copyright (C) 2009 Cisco Systems, Inc.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Setting up the clock on the MIPS boards.
- */
-
-#include <linux/init.h>
-#include <asm/mach-powertv/interrupts.h>
-#include <asm/time.h>
-
-#include "powertv-clock.h"
-
-unsigned int get_c0_compare_int(void)
-{
-	return irq_mips_timer;
-}
-
-void __init plat_time_init(void)
-{
-	powertv_clocksource_init();
-}
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index 026e823..424f034 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -1,5 +1,12 @@
 if RALINK
 
+config CLKEVT_RT3352
+	bool
+	depends on SOC_RT305X || SOC_MT7620
+	default y
+	select CLKSRC_OF
+	select CLKSRC_MMIO
+
 choice
 	prompt "Ralink SoC selection"
 	default SOC_RT305X
@@ -19,9 +26,12 @@ choice
 		bool "RT3883"
 		select USB_ARCH_HAS_OHCI
 		select USB_ARCH_HAS_EHCI
+		select HW_HAS_PCI
 
 	config SOC_MT7620
 		bool "MT7620"
+		select USB_ARCH_HAS_OHCI
+		select USB_ARCH_HAS_EHCI
 
 endchoice
 
diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
index 38cf1a8..98ae349 100644
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -6,7 +6,9 @@
 # Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
 # Copyright (C) 2013 John Crispin <blogic@openwrt.org>
 
-obj-y := prom.o of.o reset.o clk.o irq.o
+obj-y := prom.o of.o reset.o clk.o irq.o timer.o
+
+obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o
 
 obj-$(CONFIG_SOC_RT288X) += rt288x.o
 obj-$(CONFIG_SOC_RT305X) += rt305x.o
diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
index cda4b66..6d9c8c4 100644
--- a/arch/mips/ralink/Platform
+++ b/arch/mips/ralink/Platform
@@ -26,3 +26,4 @@ cflags-$(CONFIG_SOC_RT3883)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/rt
 # Ralink MT7620
 #
 load-$(CONFIG_SOC_MT7620)	+= 0xffffffff80000000
+cflags-$(CONFIG_SOC_MT7620)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7620
diff --git a/arch/mips/ralink/cevt-rt3352.c b/arch/mips/ralink/cevt-rt3352.c
new file mode 100644
index 0000000..cc17566
--- /dev/null
+++ b/arch/mips/ralink/cevt-rt3352.c
@@ -0,0 +1,145 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 by John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/reset.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#define SYSTICK_FREQ		(50 * 1000)
+
+#define SYSTICK_CONFIG		0x00
+#define SYSTICK_COMPARE		0x04
+#define SYSTICK_COUNT		0x08
+
+/* route systick irq to mips irq 7 instead of the r4k-timer */
+#define CFG_EXT_STK_EN		0x2
+/* enable the counter */
+#define CFG_CNT_EN		0x1
+
+struct systick_device {
+	void __iomem *membase;
+	struct clock_event_device dev;
+	int irq_requested;
+	int freq_scale;
+};
+
+static void systick_set_clock_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt);
+
+static int systick_next_event(unsigned long delta,
+				struct clock_event_device *evt)
+{
+	struct systick_device *sdev;
+	u32 count;
+
+	sdev = container_of(evt, struct systick_device, dev);
+	count = ioread32(sdev->membase + SYSTICK_COUNT);
+	count = (count + delta) % SYSTICK_FREQ;
+	iowrite32(count + delta, sdev->membase + SYSTICK_COMPARE);
+
+	return 0;
+}
+
+static void systick_event_handler(struct clock_event_device *dev)
+{
+	/* noting to do here */
+}
+
+static irqreturn_t systick_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *dev = (struct clock_event_device *) dev_id;
+
+	dev->event_handler(dev);
+
+	return IRQ_HANDLED;
+}
+
+static struct systick_device systick = {
+	.dev = {
+		/*
+		 * cevt-r4k uses 300, make sure systick
+		 * gets used if available
+		 */
+		.rating		= 310,
+		.features	= CLOCK_EVT_FEAT_ONESHOT,
+		.set_next_event	= systick_next_event,
+		.set_mode	= systick_set_clock_mode,
+		.event_handler	= systick_event_handler,
+	},
+};
+
+static struct irqaction systick_irqaction = {
+	.handler = systick_interrupt,
+	.flags = IRQF_PERCPU | IRQF_TIMER,
+	.dev_id = &systick.dev,
+};
+
+static void systick_set_clock_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
+{
+	struct systick_device *sdev;
+
+	sdev = container_of(evt, struct systick_device, dev);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_ONESHOT:
+		if (!sdev->irq_requested)
+			setup_irq(systick.dev.irq, &systick_irqaction);
+		sdev->irq_requested = 1;
+		iowrite32(CFG_EXT_STK_EN | CFG_CNT_EN,
+				systick.membase + SYSTICK_CONFIG);
+		break;
+
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		if (sdev->irq_requested)
+			free_irq(systick.dev.irq, &systick_irqaction);
+		sdev->irq_requested = 0;
+		iowrite32(0, systick.membase + SYSTICK_CONFIG);
+		break;
+
+	default:
+		pr_err("%s: Unhandeled mips clock_mode\n", systick.dev.name);
+		break;
+	}
+}
+
+static void __init ralink_systick_init(struct device_node *np)
+{
+	systick.membase = of_iomap(np, 0);
+	if (!systick.membase)
+		return;
+
+	systick_irqaction.name = np->name;
+	systick.dev.name = np->name;
+	clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60);
+	systick.dev.max_delta_ns = clockevent_delta2ns(0x7fff, &systick.dev);
+	systick.dev.min_delta_ns = clockevent_delta2ns(0x3, &systick.dev);
+	systick.dev.irq = irq_of_parse_and_map(np, 0);
+	if (!systick.dev.irq) {
+		pr_err("%s: request_irq failed", np->name);
+		return;
+	}
+
+	clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name,
+			SYSTICK_FREQ, 301, 16, clocksource_mmio_readl_up);
+
+	clockevents_register_device(&systick.dev);
+
+	pr_info("%s: runing - mult: %d, shift: %d\n",
+			np->name, systick.dev.mult, systick.dev.shift);
+}
+
+CLOCKSOURCE_OF_DECLARE(systick, "ralink,cevt-systick", ralink_systick_init);
diff --git a/arch/mips/ralink/clk.c b/arch/mips/ralink/clk.c
index 8dfa22f..5d0983d 100644
--- a/arch/mips/ralink/clk.c
+++ b/arch/mips/ralink/clk.c
@@ -26,7 +26,7 @@ void ralink_clk_add(const char *dev, unsigned long rate)
 	struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
 
 	if (!clk)
-		panic("failed to add clock\n");
+		panic("failed to add clock");
 
 	clk->cl.dev_id = dev;
 	clk->cl.clk = clk;
@@ -69,4 +69,5 @@ void __init plat_time_init(void)
 	pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000);
 	mips_hpt_frequency = clk_get_rate(clk) / 2;
 	clk_put(clk);
+	clocksource_of_init();
 }
diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
index 83144c3f..42dfd61 100644
--- a/arch/mips/ralink/common.h
+++ b/arch/mips/ralink/common.h
@@ -46,6 +46,8 @@ extern void ralink_of_remap(void);
 extern void ralink_clk_init(void);
 extern void ralink_clk_add(const char *dev, unsigned long rate);
 
+extern void ralink_rst_init(void);
+
 extern void prom_soc_init(struct ralink_soc_info *soc_info);
 
 __iomem void *plat_of_remap_node(const char *node);
diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
index 0018b1a..a3ad56c 100644
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -23,9 +23,6 @@
 /* does the board have sdram or ddram */
 static int dram_type;
 
-/* the pll dividers */
-static u32 mt7620_clk_divider[] = { 2, 3, 4, 8 };
-
 static struct ralink_pinmux_grp mode_mux[] = {
 	{
 		.name = "i2c",
@@ -140,34 +137,189 @@ struct ralink_pinmux rt_gpio_pinmux = {
 	.uart_mask = MT7620_GPIO_MODE_UART0_MASK,
 };
 
-void __init ralink_clk_init(void)
+static __init u32
+mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div)
 {
-	unsigned long cpu_rate, sys_rate;
-	u32 c0 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0);
-	u32 c1 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1);
-	u32 swconfig = (c0 >> CPLL_SW_CONFIG_SHIFT) & CPLL_SW_CONFIG_MASK;
-	u32 cpu_clk = (c1 >> CPLL_CPU_CLK_SHIFT) & CPLL_CPU_CLK_MASK;
-
-	if (cpu_clk) {
-		cpu_rate = 480000000;
-	} else if (!swconfig) {
-		cpu_rate = 600000000;
-	} else {
-		u32 m = (c0 >> CPLL_MULT_RATIO_SHIFT) & CPLL_MULT_RATIO;
-		u32 d = (c0 >> CPLL_DIV_RATIO_SHIFT) & CPLL_DIV_RATIO;
+	u64 t;
 
-		cpu_rate = ((40 * (m + 24)) / mt7620_clk_divider[d]) * 1000000;
-	}
+	t = ref_rate;
+	t *= mul;
+	do_div(t, div);
+
+	return t;
+}
+
+#define MHZ(x)		((x) * 1000 * 1000)
+
+static __init unsigned long
+mt7620_get_xtal_rate(void)
+{
+	u32 reg;
+
+	reg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0);
+	if (reg & SYSCFG0_XTAL_FREQ_SEL)
+		return MHZ(40);
+
+	return MHZ(20);
+}
+
+static __init unsigned long
+mt7620_get_periph_rate(unsigned long xtal_rate)
+{
+	u32 reg;
+
+	reg = rt_sysc_r32(SYSC_REG_CLKCFG0);
+	if (reg & CLKCFG0_PERI_CLK_SEL)
+		return xtal_rate;
+
+	return MHZ(40);
+}
+
+static const u32 mt7620_clk_divider[] __initconst = { 2, 3, 4, 8 };
+
+static __init unsigned long
+mt7620_get_cpu_pll_rate(unsigned long xtal_rate)
+{
+	u32 reg;
+	u32 mul;
+	u32 div;
+
+	reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0);
+	if (reg & CPLL_CFG0_BYPASS_REF_CLK)
+		return xtal_rate;
+
+	if ((reg & CPLL_CFG0_SW_CFG) == 0)
+		return MHZ(600);
+
+	mul = (reg >> CPLL_CFG0_PLL_MULT_RATIO_SHIFT) &
+	      CPLL_CFG0_PLL_MULT_RATIO_MASK;
+	mul += 24;
+	if (reg & CPLL_CFG0_LC_CURFCK)
+		mul *= 2;
+
+	div = (reg >> CPLL_CFG0_PLL_DIV_RATIO_SHIFT) &
+	      CPLL_CFG0_PLL_DIV_RATIO_MASK;
+
+	WARN_ON(div >= ARRAY_SIZE(mt7620_clk_divider));
+
+	return mt7620_calc_rate(xtal_rate, mul, mt7620_clk_divider[div]);
+}
+
+static __init unsigned long
+mt7620_get_pll_rate(unsigned long xtal_rate, unsigned long cpu_pll_rate)
+{
+	u32 reg;
+
+	reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1);
+	if (reg & CPLL_CFG1_CPU_AUX1)
+		return xtal_rate;
+
+	if (reg & CPLL_CFG1_CPU_AUX0)
+		return MHZ(480);
 
+	return cpu_pll_rate;
+}
+
+static __init unsigned long
+mt7620_get_cpu_rate(unsigned long pll_rate)
+{
+	u32 reg;
+	u32 mul;
+	u32 div;
+
+	reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
+
+	mul = reg & CPU_SYS_CLKCFG_CPU_FFRAC_MASK;
+	div = (reg >> CPU_SYS_CLKCFG_CPU_FDIV_SHIFT) &
+	      CPU_SYS_CLKCFG_CPU_FDIV_MASK;
+
+	return mt7620_calc_rate(pll_rate, mul, div);
+}
+
+static const u32 mt7620_ocp_dividers[16] __initconst = {
+	[CPU_SYS_CLKCFG_OCP_RATIO_2] = 2,
+	[CPU_SYS_CLKCFG_OCP_RATIO_3] = 3,
+	[CPU_SYS_CLKCFG_OCP_RATIO_4] = 4,
+	[CPU_SYS_CLKCFG_OCP_RATIO_5] = 5,
+	[CPU_SYS_CLKCFG_OCP_RATIO_10] = 10,
+};
+
+static __init unsigned long
+mt7620_get_dram_rate(unsigned long pll_rate)
+{
 	if (dram_type == SYSCFG0_DRAM_TYPE_SDRAM)
-		sys_rate = cpu_rate / 4;
-	else
-		sys_rate = cpu_rate / 3;
+		return pll_rate / 4;
+
+	return pll_rate / 3;
+}
+
+static __init unsigned long
+mt7620_get_sys_rate(unsigned long cpu_rate)
+{
+	u32 reg;
+	u32 ocp_ratio;
+	u32 div;
+
+	reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
+
+	ocp_ratio = (reg >> CPU_SYS_CLKCFG_OCP_RATIO_SHIFT) &
+		    CPU_SYS_CLKCFG_OCP_RATIO_MASK;
+
+	if (WARN_ON(ocp_ratio >= ARRAY_SIZE(mt7620_ocp_dividers)))
+		return cpu_rate;
+
+	div = mt7620_ocp_dividers[ocp_ratio];
+	if (WARN(!div, "invalid divider for OCP ratio %u", ocp_ratio))
+		return cpu_rate;
+
+	return cpu_rate / div;
+}
+
+void __init ralink_clk_init(void)
+{
+	unsigned long xtal_rate;
+	unsigned long cpu_pll_rate;
+	unsigned long pll_rate;
+	unsigned long cpu_rate;
+	unsigned long sys_rate;
+	unsigned long dram_rate;
+	unsigned long periph_rate;
+
+	xtal_rate = mt7620_get_xtal_rate();
+
+	cpu_pll_rate = mt7620_get_cpu_pll_rate(xtal_rate);
+	pll_rate = mt7620_get_pll_rate(xtal_rate, cpu_pll_rate);
+
+	cpu_rate = mt7620_get_cpu_rate(pll_rate);
+	dram_rate = mt7620_get_dram_rate(pll_rate);
+	sys_rate = mt7620_get_sys_rate(cpu_rate);
+	periph_rate = mt7620_get_periph_rate(xtal_rate);
+
+#define RFMT(label)	label ":%lu.%03luMHz "
+#define RINT(x)		((x) / 1000000)
+#define RFRAC(x)	(((x) / 1000) % 1000)
+
+	pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"),
+		 RINT(xtal_rate), RFRAC(xtal_rate),
+		 RINT(cpu_pll_rate), RFRAC(cpu_pll_rate),
+		 RINT(pll_rate), RFRAC(pll_rate));
+
+	pr_debug(RFMT("CPU") RFMT("DRAM") RFMT("SYS") RFMT("PERIPH"),
+		 RINT(cpu_rate), RFRAC(cpu_rate),
+		 RINT(dram_rate), RFRAC(dram_rate),
+		 RINT(sys_rate), RFRAC(sys_rate),
+		 RINT(periph_rate), RFRAC(periph_rate));
+
+#undef RFRAC
+#undef RINT
+#undef RFMT
 
 	ralink_clk_add("cpu", cpu_rate);
-	ralink_clk_add("10000100.timer", 40000000);
-	ralink_clk_add("10000500.uart", 40000000);
-	ralink_clk_add("10000c00.uartlite", 40000000);
+	ralink_clk_add("10000100.timer", periph_rate);
+	ralink_clk_add("10000120.watchdog", periph_rate);
+	ralink_clk_add("10000500.uart", periph_rate);
+	ralink_clk_add("10000b00.spi", sys_rate);
+	ralink_clk_add("10000c00.uartlite", periph_rate);
 }
 
 void __init ralink_of_remap(void)
@@ -198,7 +350,7 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 		name = "MT7620A";
 		soc_info->compatible = "ralink,mt7620a-soc";
 	} else {
-		panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
+		panic("mt7620: unknown SoC, n0:%08x n1:%08x", n0, n1);
 	}
 
 	rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
@@ -214,16 +366,19 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 
 	switch (dram_type) {
 	case SYSCFG0_DRAM_TYPE_SDRAM:
+		pr_info("Board has SDRAM\n");
 		soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN;
 		soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX;
 		break;
 
 	case SYSCFG0_DRAM_TYPE_DDR1:
+		pr_info("Board has DDR1\n");
 		soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
 		soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
 		break;
 
 	case SYSCFG0_DRAM_TYPE_DDR2:
+		pr_info("Board has DDR2\n");
 		soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
 		soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
 		break;
diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
index f25ea5b..15f21ea 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -108,7 +108,10 @@ static int __init plat_of_setup(void)
 	strncpy(of_ids[1].compatible, "palmbus", len);
 
 	if (of_platform_populate(NULL, of_ids, NULL, NULL))
-		panic("failed to populate DT\n");
+		panic("failed to populate DT");
+
+	/* make sure ithat the reset controller is setup early */
+	ralink_rst_init();
 
 	return 0;
 }
diff --git a/arch/mips/ralink/reset.c b/arch/mips/ralink/reset.c
index 22120e5..55c7ec5 100644
--- a/arch/mips/ralink/reset.c
+++ b/arch/mips/ralink/reset.c
@@ -10,6 +10,8 @@
 
 #include <linux/pm.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/reset-controller.h>
 
 #include <asm/reboot.h>
 
@@ -19,6 +21,66 @@
 #define SYSC_REG_RESET_CTRL     0x034
 #define RSTCTL_RESET_SYSTEM     BIT(0)
 
+static int ralink_assert_device(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	u32 val;
+
+	if (id < 8)
+		return -1;
+
+	val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
+	val |= BIT(id);
+	rt_sysc_w32(val, SYSC_REG_RESET_CTRL);
+
+	return 0;
+}
+
+static int ralink_deassert_device(struct reset_controller_dev *rcdev,
+				  unsigned long id)
+{
+	u32 val;
+
+	if (id < 8)
+		return -1;
+
+	val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
+	val &= ~BIT(id);
+	rt_sysc_w32(val, SYSC_REG_RESET_CTRL);
+
+	return 0;
+}
+
+static int ralink_reset_device(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	ralink_assert_device(rcdev, id);
+	return ralink_deassert_device(rcdev, id);
+}
+
+static struct reset_control_ops reset_ops = {
+	.reset = ralink_reset_device,
+	.assert = ralink_assert_device,
+	.deassert = ralink_deassert_device,
+};
+
+static struct reset_controller_dev reset_dev = {
+	.ops			= &reset_ops,
+	.owner			= THIS_MODULE,
+	.nr_resets		= 32,
+	.of_reset_n_cells	= 1,
+};
+
+void ralink_rst_init(void)
+{
+	reset_dev.of_node = of_find_compatible_node(NULL, NULL,
+						"ralink,rt2880-reset");
+	if (!reset_dev.of_node)
+		pr_err("Failed to find reset controller node");
+	else
+		reset_controller_register(&reset_dev);
+}
+
 static void ralink_restart(char *command)
 {
 	local_irq_disable();
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
index ca7ee3a..bb82a82 100644
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -276,7 +276,7 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 		name = "RT5350";
 		soc_info->compatible = "ralink,rt5350-soc";
 	} else {
-		panic("rt305x: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
+		panic("rt305x: unknown SoC, n0:%08x n1:%08x", n0, n1);
 	}
 
 	id = __raw_readl(sysc + SYSC_REG_CHIP_ID);
diff --git a/arch/mips/ralink/timer.c b/arch/mips/ralink/timer.c
new file mode 100644
index 0000000..2027857
--- /dev/null
+++ b/arch/mips/ralink/timer.c
@@ -0,0 +1,185 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+*/
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/of_gpio.h>
+#include <linux/clk.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#define TIMER_REG_TMRSTAT		0x00
+#define TIMER_REG_TMR0LOAD		0x10
+#define TIMER_REG_TMR0CTL		0x18
+
+#define TMRSTAT_TMR0INT			BIT(0)
+
+#define TMR0CTL_ENABLE			BIT(7)
+#define TMR0CTL_MODE_PERIODIC		BIT(4)
+#define TMR0CTL_PRESCALER		1
+#define TMR0CTL_PRESCALE_VAL		(0xf - TMR0CTL_PRESCALER)
+#define TMR0CTL_PRESCALE_DIV		(65536 / BIT(TMR0CTL_PRESCALER))
+
+struct rt_timer {
+	struct device	*dev;
+	void __iomem	*membase;
+	int		irq;
+	unsigned long	timer_freq;
+	unsigned long	timer_div;
+};
+
+static inline void rt_timer_w32(struct rt_timer *rt, u8 reg, u32 val)
+{
+	__raw_writel(val, rt->membase + reg);
+}
+
+static inline u32 rt_timer_r32(struct rt_timer *rt, u8 reg)
+{
+	return __raw_readl(rt->membase + reg);
+}
+
+static irqreturn_t rt_timer_irq(int irq, void *_rt)
+{
+	struct rt_timer *rt =  (struct rt_timer *) _rt;
+
+	rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
+	rt_timer_w32(rt, TIMER_REG_TMRSTAT, TMRSTAT_TMR0INT);
+
+	return IRQ_HANDLED;
+}
+
+
+static int rt_timer_request(struct rt_timer *rt)
+{
+	int err = request_irq(rt->irq, rt_timer_irq, IRQF_DISABLED,
+						dev_name(rt->dev), rt);
+	if (err) {
+		dev_err(rt->dev, "failed to request irq\n");
+	} else {
+		u32 t = TMR0CTL_MODE_PERIODIC | TMR0CTL_PRESCALE_VAL;
+		rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
+	}
+	return err;
+}
+
+static void rt_timer_free(struct rt_timer *rt)
+{
+	free_irq(rt->irq, rt);
+}
+
+static int rt_timer_config(struct rt_timer *rt, unsigned long divisor)
+{
+	if (rt->timer_freq < divisor)
+		rt->timer_div = rt->timer_freq;
+	else
+		rt->timer_div = divisor;
+
+	rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
+
+	return 0;
+}
+
+static int rt_timer_enable(struct rt_timer *rt)
+{
+	u32 t;
+
+	rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
+
+	t = rt_timer_r32(rt, TIMER_REG_TMR0CTL);
+	t |= TMR0CTL_ENABLE;
+	rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
+
+	return 0;
+}
+
+static void rt_timer_disable(struct rt_timer *rt)
+{
+	u32 t;
+
+	t = rt_timer_r32(rt, TIMER_REG_TMR0CTL);
+	t &= ~TMR0CTL_ENABLE;
+	rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
+}
+
+static int rt_timer_probe(struct platform_device *pdev)
+{
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct rt_timer *rt;
+	struct clk *clk;
+
+	rt = devm_kzalloc(&pdev->dev, sizeof(*rt), GFP_KERNEL);
+	if (!rt) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	rt->irq = platform_get_irq(pdev, 0);
+	if (!rt->irq) {
+		dev_err(&pdev->dev, "failed to load irq\n");
+		return -ENOENT;
+	}
+
+	rt->membase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(rt->membase))
+		return PTR_ERR(rt->membase);
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed get clock rate\n");
+		return PTR_ERR(clk);
+	}
+
+	rt->timer_freq = clk_get_rate(clk) / TMR0CTL_PRESCALE_DIV;
+	if (!rt->timer_freq)
+		return -EINVAL;
+
+	rt->dev = &pdev->dev;
+	platform_set_drvdata(pdev, rt);
+
+	rt_timer_request(rt);
+	rt_timer_config(rt, 2);
+	rt_timer_enable(rt);
+
+	dev_info(&pdev->dev, "maximum frequncy is %luHz\n", rt->timer_freq);
+
+	return 0;
+}
+
+static int rt_timer_remove(struct platform_device *pdev)
+{
+	struct rt_timer *rt = platform_get_drvdata(pdev);
+
+	rt_timer_disable(rt);
+	rt_timer_free(rt);
+
+	return 0;
+}
+
+static const struct of_device_id rt_timer_match[] = {
+	{ .compatible = "ralink,rt2880-timer" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, rt_timer_match);
+
+static struct platform_driver rt_timer_driver = {
+	.probe = rt_timer_probe,
+	.remove = rt_timer_remove,
+	.driver = {
+		.name		= "rt-timer",
+		.owner          = THIS_MODULE,
+		.of_match_table	= rt_timer_match
+	},
+};
+
+module_platform_driver(rt_timer_driver);
+
+MODULE_DESCRIPTION("Ralink RT2880 timer");
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org");
+MODULE_LICENSE("GPL");
diff --git a/arch/mips/sibyte/bcm1480/setup.c b/arch/mips/sibyte/bcm1480/setup.c
index 05ed92c..8e2e04f 100644
--- a/arch/mips/sibyte/bcm1480/setup.c
+++ b/arch/mips/sibyte/bcm1480/setup.c
@@ -22,6 +22,7 @@
 #include <linux/string.h>
 
 #include <asm/bootinfo.h>
+#include <asm/cpu.h>
 #include <asm/mipsregs.h>
 #include <asm/io.h>
 #include <asm/sibyte/sb1250.h>
@@ -119,7 +120,7 @@ void __init bcm1480_setup(void)
 	uint64_t sys_rev;
 	int plldiv;
 
-	sb1_pass = read_c0_prid() & 0xff;
+	sb1_pass = read_c0_prid() & PRID_REV_MASK;
 	sys_rev = __raw_readq(IOADDR(A_SCD_SYSTEM_REVISION));
 	soc_type = SYS_SOC_TYPE(sys_rev);
 	part_type = G_SYS_PART(sys_rev);
diff --git a/arch/mips/sibyte/sb1250/setup.c b/arch/mips/sibyte/sb1250/setup.c
index a14bd4c..3c02b2a 100644
--- a/arch/mips/sibyte/sb1250/setup.c
+++ b/arch/mips/sibyte/sb1250/setup.c
@@ -22,6 +22,7 @@
 #include <linux/string.h>
 
 #include <asm/bootinfo.h>
+#include <asm/cpu.h>
 #include <asm/mipsregs.h>
 #include <asm/io.h>
 #include <asm/sibyte/sb1250.h>
@@ -182,7 +183,7 @@ void __init sb1250_setup(void)
 	int plldiv;
 	int bad_config = 0;
 
-	sb1_pass = read_c0_prid() & 0xff;
+	sb1_pass = read_c0_prid() & PRID_REV_MASK;
 	sys_rev = __raw_readq(IOADDR(A_SCD_SYSTEM_REVISION));
 	soc_type = SYS_SOC_TYPE(sys_rev);
 	soc_pass = G_SYS_REVISION(sys_rev);
diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c
index dd0ab98..f9407e1 100644
--- a/arch/mips/sni/a20r.c
+++ b/arch/mips/sni/a20r.c
@@ -122,7 +122,6 @@ static struct resource sc26xx_rsrc[] = {
 
 static struct sccnxp_pdata sccnxp_data = {
 	.reg_shift	= 2,
-	.frequency	= 3686400,
 	.mctrl_cfg[0]	= MCTRL_SIG(DTR_OP, LINE_OP7) |
 			  MCTRL_SIG(RTS_OP, LINE_OP3) |
 			  MCTRL_SIG(DSR_IP, LINE_IP5) |
diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c
index 5b09b35..efad85c 100644
--- a/arch/mips/sni/setup.c
+++ b/arch/mips/sni/setup.c
@@ -25,6 +25,7 @@
 #endif
 
 #include <asm/bootinfo.h>
+#include <asm/cpu.h>
 #include <asm/io.h>
 #include <asm/reboot.h>
 #include <asm/sni.h>
@@ -173,7 +174,7 @@ void __init plat_mem_setup(void)
 		system_type = "RM300-Cxx";
 		break;
 	case SNI_BRD_PCI_DESKTOP:
-		switch (read_c0_prid() & 0xff00) {
+		switch (read_c0_prid() & PRID_IMP_MASK) {
 		case PRID_IMP_R4600:
 		case PRID_IMP_R4700:
 			system_type = "RM200-C20";
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index 681e7f8..2b0b83c 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -350,7 +350,7 @@ static void __init select_board(void)
 	}
 
 	/* select "default" board */
-#ifdef CONFIG_CPU_TX39XX
+#ifdef CONFIG_TOSHIBA_JMR3927
 	txx9_board_vec = &jmr3927_vec;
 #endif
 #ifdef CONFIG_CPU_TX49XX
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
index 70e4f66..6aaa160 100644
--- a/arch/mn10300/Kconfig
+++ b/arch/mn10300/Kconfig
@@ -1,7 +1,6 @@
 config MN10300
 	def_bool y
 	select HAVE_OPROFILE
-	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_SHOW
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select HAVE_ARCH_TRACEHOOK
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index 222152a..177d61d 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -171,10 +171,10 @@ ret_from_intr:
 	mov	(REG_EPSW,fp),d0	# need to deliver signals before
 					# returning to userspace
 	and	EPSW_nSL,d0
-	beq	resume_kernel		# returning to supervisor mode
+	bne	resume_userspace	# returning to userspace
 
 #ifdef CONFIG_PREEMPT
-ENTRY(resume_kernel)
+resume_kernel:
 	LOCAL_IRQ_DISABLE
 	mov	(TI_preempt_count,a2),d0	# non-zero preempt_count ?
 	cmp	0,d0
@@ -189,6 +189,8 @@ need_resched:
 	bne	restore_all
 	call	preempt_schedule_irq[],0
 	jmp	need_resched
+#else
+	jmp	resume_kernel
 #endif
 
 
diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c
index 8a2e6de..3516cbd 100644
--- a/arch/mn10300/mm/fault.c
+++ b/arch/mn10300/mm/fault.c
@@ -171,6 +171,8 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long fault_code,
 	if (in_atomic() || !mm)
 		goto no_context;
 
+	if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR)
+		flags |= FAULT_FLAG_USER;
 retry:
 	down_read(&mm->mmap_sem);
 
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index d60bf98..9488209 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -11,7 +11,6 @@ config OPENRISC
 	select HAVE_MEMBLOCK
 	select ARCH_REQUIRE_GPIOLIB
         select HAVE_ARCH_TRACEHOOK
-	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_CHIP
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
diff --git a/arch/openrisc/include/asm/prom.h b/arch/openrisc/include/asm/prom.h
index bbb34e5..93c9980 100644
--- a/arch/openrisc/include/asm/prom.h
+++ b/arch/openrisc/include/asm/prom.h
@@ -14,56 +14,9 @@
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */
-
-#include <linux/of.h>	/* linux/of.h gets to determine #include ordering */
-
 #ifndef _ASM_OPENRISC_PROM_H
 #define _ASM_OPENRISC_PROM_H
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
 
-#include <linux/types.h>
-#include <asm/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/atomic.h>
-#include <linux/of_irq.h>
-#include <linux/of_fdt.h>
-#include <linux/of_address.h>
-#include <linux/proc_fs.h>
-#include <linux/platform_device.h>
 #define HAVE_ARCH_DEVTREE_FIXUPS
 
-/* Other Prototypes */
-extern int early_uartlite_console(void);
-
-/* Parse the ibm,dma-window property of an OF node into the busno, phys and
- * size parameters.
- */
-void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
-		unsigned long *busno, unsigned long *phys, unsigned long *size);
-
-extern void kdump_move_device_tree(void);
-
-/* CPU OF node matching */
-struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
-
-/* Get the MAC address */
-extern const void *of_get_mac_address(struct device_node *np);
-
-/**
- * of_irq_map_pci - Resolve the interrupt for a PCI device
- * @pdev:	the device whose interrupt is to be resolved
- * @out_irq:	structure of_irq filled by this function
- *
- * This function resolves the PCI interrupt for a given PCI device. If a
- * device-node exists for a given pci_dev, it will use normal OF tree
- * walking. If not, it will implement standard swizzling and walk up the
- * PCI tree until an device-node is found, at which point it will finish
- * resolving using the OF tree walking.
- */
-struct pci_dev;
-extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
 #endif /* _ASM_OPENRISC_PROM_H */
diff --git a/arch/openrisc/kernel/prom.c b/arch/openrisc/kernel/prom.c
index 5869e3f..a63e768 100644
--- a/arch/openrisc/kernel/prom.c
+++ b/arch/openrisc/kernel/prom.c
@@ -55,11 +55,6 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 	memblock_add(base, size);
 }
 
-void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
-{
-	return __va(memblock_alloc(size, align));
-}
-
 void __init early_init_devtree(void *params)
 {
 	void *alloc;
@@ -96,8 +91,7 @@ void __init early_init_devtree(void *params)
 }
 
 #ifdef CONFIG_BLK_DEV_INITRD
-void __init early_init_dt_setup_initrd_arch(unsigned long start,
-		unsigned long end)
+void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
 {
 	initrd_start = (unsigned long)__va(start);
 	initrd_end = (unsigned long)__va(end);
diff --git a/arch/openrisc/mm/fault.c b/arch/openrisc/mm/fault.c
index 4a41f84..0703acf 100644
--- a/arch/openrisc/mm/fault.c
+++ b/arch/openrisc/mm/fault.c
@@ -86,6 +86,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long address,
 	if (user_mode(regs)) {
 		/* Exception was in userspace: reenable interrupts */
 		local_irq_enable();
+		flags |= FAULT_FLAG_USER;
 	} else {
 		/* If exception was in a syscall, then IRQ's may have
 		 * been enabled or disabled.  If they were enabled,
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index aa399a5..7dcde53 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -14,7 +14,6 @@ config PARISC
 	select HAVE_PERF_EVENTS
 	select GENERIC_ATOMIC64 if !64BIT
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
-	select HAVE_GENERIC_HARDIRQS
 	select BROKEN_RODATA
 	select GENERIC_IRQ_PROBE
 	select GENERIC_PCI_IOMAP
@@ -288,6 +287,9 @@ config SYSVIPC_COMPAT
 	def_bool y
 	depends on COMPAT && SYSVIPC
 
+config AUDIT_ARCH
+	def_bool y
+
 config HPUX
 	bool "Support for HP-UX binaries"
 	depends on !64BIT
diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
index e02f665..7187664 100644
--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@@ -94,7 +94,7 @@ PALOCONF := $(shell if [ -f $(src)/palo.conf ]; then echo $(src)/palo.conf; \
 	else echo $(obj)/palo.conf; \
 	fi)
 
-palo: vmlinuz
+palo lifimage: vmlinuz
 	@if test ! -x "$(PALO)"; then \
 		echo 'ERROR: Please install palo first (apt-get install palo)';\
 		echo 'or build it from source and install it somewhere in your $$PATH';\
@@ -109,16 +109,23 @@ palo: vmlinuz
 	fi
 	$(PALO) -f $(PALOCONF)
 
-# Shorthands for known targets not supported by parisc, use vmlinux/vmlinuz as default
+BOOT_TARGETS    = zImage Image palo lifimage
+INSTALL_TARGETS = zinstall install
+
+PHONY += bzImage $(BOOT_TARGETS) $(INSTALL_TARGETS)
+
+bzImage zImage: vmlinuz
 Image: vmlinux
-zImage bzImage: vmlinuz
 
 vmlinuz: vmlinux
 	@gzip -cf -9 $< > $@
 
-install: vmlinuz
-	sh $(src)/arch/parisc/install.sh \
-			$(KERNELRELEASE) $< System.map "$(INSTALL_PATH)"
+install:
+	$(CONFIG_SHELL) $(src)/arch/parisc/install.sh \
+			$(KERNELRELEASE) vmlinux System.map "$(INSTALL_PATH)"
+zinstall:
+	$(CONFIG_SHELL) $(src)/arch/parisc/install.sh \
+			$(KERNELRELEASE) vmlinuz System.map "$(INSTALL_PATH)"
 
 CLEAN_FILES	+= lifimage
 MRPROPER_FILES	+= palo.conf
@@ -127,10 +134,11 @@ define archhelp
 	@echo  '* vmlinux	- Uncompressed kernel image (./vmlinux)'
 	@echo  '  vmlinuz	- Compressed kernel image (./vmlinuz)'
 	@echo  '  palo		- Bootable image (./lifimage)'
-	@echo  '  install	- Install kernel using'
+	@echo  '  install	- Install uncompressed vmlinux kernel using'
 	@echo  '		  (your) ~/bin/$(INSTALLKERNEL) or'
 	@echo  '		  (distribution) /sbin/$(INSTALLKERNEL) or'
 	@echo  '		  copy to $$(INSTALL_PATH)'
+	@echo  '  zinstall	- Install compressed vmlinuz kernel'
 endef
 
 # we require gcc 3.3 or above to compile the kernel
diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig
index 0f90569..9387cc2 100644
--- a/arch/parisc/configs/712_defconfig
+++ b/arch/parisc/configs/712_defconfig
@@ -40,6 +40,8 @@ CONFIG_IP_NF_QUEUE=m
 CONFIG_LLC2=m
 CONFIG_NET_PKTGEN=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_PARPORT=y
diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig
index b647b18..9002532 100644
--- a/arch/parisc/configs/a500_defconfig
+++ b/arch/parisc/configs/a500_defconfig
@@ -79,6 +79,8 @@ CONFIG_IP_DCCP=m
 CONFIG_LLC2=m
 CONFIG_NET_PKTGEN=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_BLK_DEV_UMEM=m
diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig
index e289f5b..f1a0c25 100644
--- a/arch/parisc/configs/b180_defconfig
+++ b/arch/parisc/configs/b180_defconfig
@@ -4,6 +4,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODVERSIONS=y
@@ -27,6 +28,8 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_LRO is not set
 CONFIG_IPV6=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=y
diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig
index 311ca36..ec1b014 100644
--- a/arch/parisc/configs/c3000_defconfig
+++ b/arch/parisc/configs/c3000_defconfig
@@ -5,6 +5,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
@@ -39,6 +40,8 @@ CONFIG_NETFILTER_DEBUG=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_NET_PKTGEN=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_BLK_DEV_UMEM=m
diff --git a/arch/parisc/configs/c8000_defconfig b/arch/parisc/configs/c8000_defconfig
index f110063..e1c8d20 100644
--- a/arch/parisc/configs/c8000_defconfig
+++ b/arch/parisc/configs/c8000_defconfig
@@ -62,6 +62,8 @@ CONFIG_TIPC=m
 CONFIG_LLC2=m
 CONFIG_DNS_RESOLVER=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=y
diff --git a/arch/parisc/configs/default_defconfig b/arch/parisc/configs/default_defconfig
index dfe88f6..ba61495 100644
--- a/arch/parisc/configs/default_defconfig
+++ b/arch/parisc/configs/default_defconfig
@@ -49,6 +49,8 @@ CONFIG_INET6_ESP=y
 CONFIG_INET6_IPCOMP=y
 CONFIG_LLC2=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_PARPORT=y
diff --git a/arch/parisc/configs/generic-32bit_defconfig b/arch/parisc/configs/generic-32bit_defconfig
new file mode 100644
index 0000000..33b148f
--- /dev/null
+++ b/arch/parisc/configs/generic-32bit_defconfig
@@ -0,0 +1,328 @@
+CONFIG_LOCALVERSION="-32bit"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_EXPERT=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_PERF_EVENTS=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PA7100LC=y
+CONFIG_SMP=y
+CONFIG_HZ_100=y
+CONFIG_IOMMU_CCIO=y
+CONFIG_GSC_LASI=y
+CONFIG_GSC_WAX=y
+CONFIG_EISA=y
+CONFIG_PCI=y
+CONFIG_GSC_DINO=y
+CONFIG_PCI_LBA=y
+CONFIG_PCCARD=m
+CONFIG_YENTA=m
+# CONFIG_PDC_CHASSIS is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=m
+CONFIG_LLC2=m
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_1284=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=6144
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_NS87415=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_LASI700=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_ZALON=y
+CONFIG_SCSI_DH=y
+CONFIG_ATA=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_TUN=m
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_ADAPTEC is not set
+# CONFIG_NET_VENDOR_ALTEON is not set
+# CONFIG_NET_VENDOR_AMD is not set
+# CONFIG_NET_VENDOR_ATHEROS is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_BROCADE is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CISCO is not set
+CONFIG_NET_TULIP=y
+CONFIG_TULIP=y
+# CONFIG_NET_VENDOR_DLINK is not set
+# CONFIG_NET_VENDOR_EMULEX is not set
+# CONFIG_NET_VENDOR_EXAR is not set
+# CONFIG_NET_VENDOR_HP is not set
+CONFIG_LASI_82596=y
+# CONFIG_NET_VENDOR_MELLANOX is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MYRI is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NVIDIA is not set
+# CONFIG_NET_VENDOR_OKI is not set
+# CONFIG_NET_PACKET_ENGINE is not set
+# CONFIG_NET_VENDOR_QLOGIC is not set
+# CONFIG_NET_VENDOR_REALTEK is not set
+# CONFIG_NET_VENDOR_RDC is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SILAN is not set
+# CONFIG_NET_VENDOR_SIS is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SUN is not set
+# CONFIG_NET_VENDOR_TEHUTI is not set
+# CONFIG_NET_VENDOR_TI is not set
+# CONFIG_NET_VENDOR_VIA is not set
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPPOE=m
+# CONFIG_WLAN is not set
+CONFIG_INPUT_POLLDEV=y
+CONFIG_KEYBOARD_HIL_OLD=m
+CONFIG_KEYBOARD_HIL=m
+CONFIG_MOUSE_SERIAL=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+CONFIG_LEGACY_PTY_COUNT=64
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_PRINTER=m
+CONFIG_PPDEV=m
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_POWER_SUPPLY=y
+# CONFIG_HWMON is not set
+CONFIG_AGP=y
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_MATROX=m
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_VOODOO1=m
+CONFIG_DUMMY_CONSOLE_COLUMNS=128
+CONFIG_DUMMY_CONSOLE_ROWS=48
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_HARMONY=m
+CONFIG_HIDRAW=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_LOGITECH_DJ=m
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_ORTEK=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+CONFIG_HID_SMARTJOYPLUS=y
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+CONFIG_HID_ZEROPLUS=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_DMADEVICES=y
+CONFIG_AUXDISPLAY=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_RT=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+CONFIG_QFMT_V2=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_XATTR=y
+CONFIG_NFS_FS=m
+# CONFIG_NFS_V2 is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+CONFIG_CIFS=m
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_RT_MUTEX_TESTER=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_RCU_CPU_STALL_INFO=y
+CONFIG_LATENCYTOP=y
+CONFIG_LKDTM=m
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_T10DIF=y
+CONFIG_FONTS=y
diff --git a/arch/parisc/configs/generic-64bit_defconfig b/arch/parisc/configs/generic-64bit_defconfig
new file mode 100644
index 0000000..5874ceb
--- /dev/null
+++ b/arch/parisc/configs/generic-64bit_defconfig
@@ -0,0 +1,346 @@
+CONFIG_LOCALVERSION="-64bit"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_BLK_DEV_INTEGRITY=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_PA8X00=y
+CONFIG_MLONGCALLS=y
+CONFIG_64BIT=y
+CONFIG_SMP=y
+# CONFIG_COMPACTION is not set
+CONFIG_HPPB=y
+CONFIG_IOMMU_CCIO=y
+CONFIG_GSC_LASI=y
+CONFIG_GSC_WAX=y
+CONFIG_PCI=y
+CONFIG_PCI_STUB=m
+CONFIG_PCI_IOV=y
+CONFIG_GSC_DINO=y
+CONFIG_PCI_LBA=y
+CONFIG_BINFMT_MISC=m
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_ADVANCED is not set
+CONFIG_NETFILTER_NETLINK_LOG=y
+CONFIG_DCB=y
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_IDE=y
+CONFIG_IDE_GD=m
+CONFIG_IDE_GD_ATAPI=y
+CONFIG_BLK_DEV_IDECD=m
+CONFIG_BLK_DEV_NS87415=y
+CONFIG_BLK_DEV_SIIMAGE=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_SCSI_ISCSI_ATTRS=y
+CONFIG_SCSI_SRP_ATTRS=y
+CONFIG_ISCSI_BOOT_SYSFS=y
+CONFIG_SCSI_MPT2SAS=y
+CONFIG_SCSI_LASI700=m
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_ZALON=y
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_DH=y
+CONFIG_ATA=y
+CONFIG_ATA_GENERIC=y
+CONFIG_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_RAID=m
+CONFIG_DM_UEVENT=y
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_SAS=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_TUN=y
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_ADAPTEC is not set
+# CONFIG_NET_VENDOR_ALTEON is not set
+# CONFIG_NET_VENDOR_AMD is not set
+# CONFIG_NET_VENDOR_ATHEROS is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_BROCADE is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CISCO is not set
+CONFIG_NET_TULIP=y
+CONFIG_TULIP=y
+# CONFIG_NET_VENDOR_DLINK is not set
+# CONFIG_NET_VENDOR_EMULEX is not set
+# CONFIG_NET_VENDOR_EXAR is not set
+CONFIG_HP100=m
+CONFIG_E1000=y
+CONFIG_LASI_82596=y
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MELLANOX is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MYRI is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NVIDIA is not set
+# CONFIG_NET_VENDOR_OKI is not set
+CONFIG_QLA3XXX=m
+CONFIG_QLCNIC=m
+CONFIG_QLGE=m
+# CONFIG_NET_VENDOR_REALTEK is not set
+# CONFIG_NET_VENDOR_RDC is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SILAN is not set
+# CONFIG_NET_VENDOR_SIS is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SUN is not set
+# CONFIG_NET_VENDOR_TEHUTI is not set
+# CONFIG_NET_VENDOR_TI is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_PHYLIB=y
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_HIL_OLD is not set
+# CONFIG_KEYBOARD_HIL is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_MISC=y
+CONFIG_SERIO_SERPORT=m
+# CONFIG_HP_SDC is not set
+CONFIG_SERIO_RAW=m
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_NOZOMI=m
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=8
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_JSM=m
+CONFIG_IPMI_HANDLER=y
+CONFIG_IPMI_DEVICE_INTERFACE=y
+CONFIG_IPMI_SI=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_TCG_TPM=m
+CONFIG_TCG_ATMEL=m
+CONFIG_PTP_1588_CLOCK=m
+CONFIG_SENSORS_I5K_AMB=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_WATCHDOG=y
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_SSB=m
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_HTC_PASIC3=m
+CONFIG_LPC_SCH=m
+CONFIG_MFD_SM501=m
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_AGP=y
+CONFIG_AGP_PARISC=y
+CONFIG_DRM=y
+CONFIG_DRM_RADEON=y
+CONFIG_DRM_RADEON_UMS=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+CONFIG_HID=m
+CONFIG_HIDRAW=y
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_KYE=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_HID_NTRIG=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_MON=m
+CONFIG_USB_WUSB_CBAF=m
+CONFIG_USB_XHCI_HCD=m
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_R8A66597_HCD=m
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+CONFIG_UIO=y
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+CONFIG_STAGING=y
+# CONFIG_NET_VENDOR_SILICOM is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_XFS_FS=m
+CONFIG_BTRFS_FS=m
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+CONFIG_QFMT_V2=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_ISO9660_FS=y
+CONFIG_UDF_FS=y
+CONFIG_VFAT_FS=m
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_XATTR=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_SYSV_FS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V4=m
+CONFIG_NFS_V4_1=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V4=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_UTF8=m
+CONFIG_PRINTK_TIME=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=m
+CONFIG_LIBCRC32C=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
diff --git a/arch/parisc/include/asm/assembly.h b/arch/parisc/include/asm/assembly.h
index 0da8482..b3069fd 100644
--- a/arch/parisc/include/asm/assembly.h
+++ b/arch/parisc/include/asm/assembly.h
@@ -515,5 +515,17 @@
 	nop	/* 7 */
 	.endm
 
+	/*
+	 * ASM_EXCEPTIONTABLE_ENTRY
+	 *
+	 * Creates an exception table entry.
+	 * Do not convert to a assembler macro. This won't work.
+	 */
+#define ASM_EXCEPTIONTABLE_ENTRY(fault_addr, except_addr)	\
+	.section __ex_table,"aw"			!	\
+	ASM_ULONG_INSN	fault_addr, except_addr		!	\
+	.previous
+
+
 #endif /* __ASSEMBLY__ */
 #endif
diff --git a/arch/parisc/include/asm/delay.h b/arch/parisc/include/asm/delay.h
index 912ee7e..08e58e6 100644
--- a/arch/parisc/include/asm/delay.h
+++ b/arch/parisc/include/asm/delay.h
@@ -1,15 +1,5 @@
-#ifndef _PARISC_DELAY_H
-#define _PARISC_DELAY_H
-
-#include <asm/special_insns.h>    /* for mfctl() */
-#include <asm/processor.h> /* for boot_cpu_data */
-
-
-/*
- * Copyright (C) 1993 Linus Torvalds
- *
- * Delay routines
- */
+#ifndef _ASM_PARISC_DELAY_H
+#define _ASM_PARISC_DELAY_H
 
 static __inline__ void __delay(unsigned long loops) {
 	asm volatile(
@@ -19,25 +9,14 @@ static __inline__ void __delay(unsigned long loops) {
 		: "=r" (loops) : "0" (loops));
 }
 
-static __inline__ void __cr16_delay(unsigned long clocks) {
-	unsigned long start;
-
-	/*
-	 * Note: Due to unsigned math, cr16 rollovers shouldn't be
-	 * a problem here. However, on 32 bit, we need to make sure
-	 * we don't pass in too big a value. The current default
-	 * value of MAX_UDELAY_MS should help prevent this.
-	 */
+extern void __udelay(unsigned long usecs);
+extern void __udelay_bad(unsigned long usecs);
 
-	start = mfctl(16);
-	while ((mfctl(16) - start) < clocks)
-	    ;
+static inline void udelay(unsigned long usecs)
+{
+	if (__builtin_constant_p(usecs) && (usecs) > 20000)
+		__udelay_bad(usecs);
+	__udelay(usecs);
 }
 
-static __inline__ void __udelay(unsigned long usecs) {
-	__cr16_delay(usecs * ((unsigned long)boot_cpu_data.cpu_hz / 1000000UL));
-}
-
-#define udelay(n) __udelay(n)
-
-#endif /* defined(_PARISC_DELAY_H) */
+#endif /* _ASM_PARISC_DELAY_H */
diff --git a/arch/parisc/include/asm/hardirq.h b/arch/parisc/include/asm/hardirq.h
index 241c345..9b3bd03 100644
--- a/arch/parisc/include/asm/hardirq.h
+++ b/arch/parisc/include/asm/hardirq.h
@@ -21,7 +21,6 @@ typedef struct {
 	unsigned int irq_stack_usage;
 #ifdef CONFIG_SMP
 	unsigned int irq_resched_count;
-	unsigned int irq_call_count;
 #endif
 	unsigned int irq_unaligned_count;
 	unsigned int irq_fpassist_count;
diff --git a/arch/parisc/include/asm/ptrace.h b/arch/parisc/include/asm/ptrace.h
index a2db278..3c3cb00 100644
--- a/arch/parisc/include/asm/ptrace.h
+++ b/arch/parisc/include/asm/ptrace.h
@@ -19,5 +19,9 @@
 #define user_stack_pointer(regs)	((regs)->gr[30])
 unsigned long profile_pc(struct pt_regs *);
 
+static inline unsigned long regs_return_value(struct pt_regs *regs)
+{
+	return regs->gr[20];
+}
 
 #endif
diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h
index 540c88f..bc7cf12 100644
--- a/arch/parisc/include/asm/thread_info.h
+++ b/arch/parisc/include/asm/thread_info.h
@@ -59,6 +59,7 @@ struct thread_info {
 #define TIF_32BIT               4       /* 32 bit binary */
 #define TIF_MEMDIE		5	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	6	/* restore saved signal mask */
+#define TIF_SYSCALL_AUDIT	7	/* syscall auditing active */
 #define TIF_NOTIFY_RESUME	8	/* callback before returning to user */
 #define TIF_SINGLESTEP		9	/* single stepping? */
 #define TIF_BLOCKSTEP		10	/* branch stepping? */
@@ -68,6 +69,7 @@ struct thread_info {
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
 #define _TIF_32BIT		(1 << TIF_32BIT)
+#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
 #define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
 #define _TIF_BLOCKSTEP		(1 << TIF_BLOCKSTEP)
@@ -75,7 +77,7 @@ struct thread_info {
 #define _TIF_USER_WORK_MASK     (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | \
                                  _TIF_NEED_RESCHED)
 #define _TIF_SYSCALL_TRACE_MASK (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP |	\
-				 _TIF_BLOCKSTEP)
+				 _TIF_BLOCKSTEP | _TIF_SYSCALL_AUDIT)
 
 #endif /* __KERNEL__ */
 
diff --git a/arch/parisc/include/asm/traps.h b/arch/parisc/include/asm/traps.h
index 1945f99..4736020 100644
--- a/arch/parisc/include/asm/traps.h
+++ b/arch/parisc/include/asm/traps.h
@@ -6,7 +6,7 @@ struct pt_regs;
 
 /* traps.c */
 void parisc_terminate(char *msg, struct pt_regs *regs,
-		int code, unsigned long offset);
+		int code, unsigned long offset) __noreturn __cold;
 
 /* mm/fault.c */
 void do_page_fault(struct pt_regs *regs, unsigned long code,
diff --git a/arch/parisc/include/asm/uaccess.h b/arch/parisc/include/asm/uaccess.h
index e0a8235..63f4dd0 100644
--- a/arch/parisc/include/asm/uaccess.h
+++ b/arch/parisc/include/asm/uaccess.h
@@ -4,11 +4,14 @@
 /*
  * User space memory access functions
  */
+#include <asm/processor.h>
 #include <asm/page.h>
 #include <asm/cache.h>
 #include <asm/errno.h>
 #include <asm-generic/uaccess-unaligned.h>
 
+#include <linux/sched.h>
+
 #define VERIFY_READ 0
 #define VERIFY_WRITE 1
 
@@ -33,12 +36,43 @@ extern int __get_user_bad(void);
 extern int __put_kernel_bad(void);
 extern int __put_user_bad(void);
 
-static inline long access_ok(int type, const void __user * addr,
-		unsigned long size)
+
+/*
+ * Test whether a block of memory is a valid user space address.
+ * Returns 0 if the range is valid, nonzero otherwise.
+ */
+static inline int __range_not_ok(unsigned long addr, unsigned long size,
+				 unsigned long limit)
 {
-	return 1;
+	unsigned long __newaddr = addr + size;
+	return (__newaddr < addr || __newaddr > limit || size > limit);
 }
 
+/**
+ * access_ok: - Checks if a user space pointer is valid
+ * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE.  Note that
+ *        %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
+ *        to write to a block, it is always safe to read from it.
+ * @addr: User space pointer to start of block to check
+ * @size: Size of block to check
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Checks if a pointer to a block of memory in user space is valid.
+ *
+ * Returns true (nonzero) if the memory block may be valid, false (zero)
+ * if it is definitely invalid.
+ *
+ * Note that, depending on architecture, this function probably just
+ * checks that the pointer is in the user space range - after calling
+ * this function, memory access functions may still return -EFAULT.
+ */
+#define access_ok(type, addr, size)					\
+(	__chk_user_ptr(addr),						\
+	!__range_not_ok((unsigned long) (__force void *) (addr),	\
+			size, user_addr_max())				\
+)
+
 #define put_user __put_user
 #define get_user __get_user
 
@@ -59,12 +93,13 @@ static inline long access_ok(int type, const void __user * addr,
 /*
  * The exception table contains two values: the first is an address
  * for an instruction that is allowed to fault, and the second is
- * the address to the fixup routine. 
+ * the address to the fixup routine. Even on a 64bit kernel we could
+ * use a 32bit (unsigned int) address here.
  */
 
 struct exception_table_entry {
-	unsigned long insn;  /* address of insn that is allowed to fault.   */
-	long fixup;          /* fixup routine */
+	unsigned long insn;	/* address of insn that is allowed to fault. */
+	unsigned long fixup;	/* fixup routine */
 };
 
 #define ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr )\
@@ -218,7 +253,11 @@ extern long lstrnlen_user(const char __user *,long);
 /*
  * Complex access routines -- macros
  */
-#define user_addr_max() (~0UL)
+#ifdef CONFIG_COMPAT
+#define user_addr_max() (TASK_SIZE)
+#else
+#define user_addr_max() (DEFAULT_TASK_SIZE)
+#endif
 
 #define strnlen_user lstrnlen_user
 #define strlen_user(str) lstrnlen_user(str, 0x7fffffffL)
diff --git a/arch/parisc/install.sh b/arch/parisc/install.sh
index 4da682b..6f68784 100644
--- a/arch/parisc/install.sh
+++ b/arch/parisc/install.sh
@@ -19,20 +19,48 @@
 #   $4 - default install path (blank if root directory)
 #
 
+verify () {
+	if [ ! -f "$1" ]; then
+		echo ""                                                   1>&2
+		echo " *** Missing file: $1"                              1>&2
+		echo ' *** You need to run "make" before "make install".' 1>&2
+		echo ""                                                   1>&2
+		exit 1
+	fi
+}
+
+# Make sure the files actually exist
+
+verify "$2"
+verify "$3"
+
 # User may have a custom install script
 
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
+if [ -n "${INSTALLKERNEL}" ]; then
+  if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+  if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
+fi
 
 # Default install
 
-if [ -f $4/vmlinuz ]; then
-	mv $4/vmlinuz $4/vmlinuz.old
+if [ "$(basename $2)" = "zImage" ]; then
+# Compressed install
+  echo "Installing compressed kernel"
+  base=vmlinuz
+else
+# Normal install
+  echo "Installing normal kernel"
+  base=vmlinux
+fi
+
+if [ -f $4/$base-$1 ]; then
+  mv $4/$base-$1 $4/$base-$1.old
 fi
+cat $2 > $4/$base-$1
 
-if [ -f $4/System.map ]; then
-	mv $4/System.map $4/System.old
+# Install system map file
+if [ -f $4/System.map-$1 ]; then
+  mv $4/System.map-$1 $4/System.map-$1.old
 fi
+cp $3 $4/System.map-$1
 
-cat $2 > $4/vmlinuz
-cp $3 $4/System.map
diff --git a/arch/parisc/kernel/Makefile b/arch/parisc/kernel/Makefile
index 66ee3f1..ff87b46 100644
--- a/arch/parisc/kernel/Makefile
+++ b/arch/parisc/kernel/Makefile
@@ -29,7 +29,9 @@ obj-$(CONFIG_PCI)	+= pci.o
 obj-$(CONFIG_MODULES)	+= module.o
 obj-$(CONFIG_64BIT)	+= binfmt_elf32.o sys_parisc32.o signal32.o
 obj-$(CONFIG_STACKTRACE)+= stacktrace.o
+obj-$(CONFIG_AUDIT)	+= audit.o
+obj64-$(CONFIG_AUDIT)	+= compat_audit.o
 # only supported for PCX-W/U in 64-bit mode at the moment
-obj-$(CONFIG_64BIT)	+= perf.o perf_asm.o
+obj-$(CONFIG_64BIT)	+= perf.o perf_asm.o $(obj64-y)
 obj-$(CONFIG_FUNCTION_TRACER)		+= ftrace.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
diff --git a/arch/parisc/kernel/audit.c b/arch/parisc/kernel/audit.c
new file mode 100644
index 0000000..eb64a61
--- /dev/null
+++ b/arch/parisc/kernel/audit.c
@@ -0,0 +1,81 @@
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/audit.h>
+#include <asm/unistd.h>
+
+static unsigned dir_class[] = {
+#include <asm-generic/audit_dir_write.h>
+~0U
+};
+
+static unsigned read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+static unsigned write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
+static unsigned chattr_class[] = {
+#include <asm-generic/audit_change_attr.h>
+~0U
+};
+
+static unsigned signal_class[] = {
+#include <asm-generic/audit_signal.h>
+~0U
+};
+
+int audit_classify_arch(int arch)
+{
+#ifdef CONFIG_COMPAT
+	if (arch == AUDIT_ARCH_PARISC)
+		return 1;
+#endif
+	return 0;
+}
+
+int audit_classify_syscall(int abi, unsigned syscall)
+{
+#ifdef CONFIG_COMPAT
+	extern int parisc32_classify_syscall(unsigned);
+	if (abi == AUDIT_ARCH_PARISC)
+		return parisc32_classify_syscall(syscall);
+#endif
+	switch (syscall) {
+	case __NR_open:
+		return 2;
+	case __NR_openat:
+		return 3;
+	case __NR_execve:
+		return 5;
+	default:
+		return 0;
+	}
+}
+
+static int __init audit_classes_init(void)
+{
+#ifdef CONFIG_COMPAT
+	extern __u32 parisc32_dir_class[];
+	extern __u32 parisc32_write_class[];
+	extern __u32 parisc32_read_class[];
+	extern __u32 parisc32_chattr_class[];
+	extern __u32 parisc32_signal_class[];
+	audit_register_class(AUDIT_CLASS_WRITE_32, parisc32_write_class);
+	audit_register_class(AUDIT_CLASS_READ_32, parisc32_read_class);
+	audit_register_class(AUDIT_CLASS_DIR_WRITE_32, parisc32_dir_class);
+	audit_register_class(AUDIT_CLASS_CHATTR_32, parisc32_chattr_class);
+	audit_register_class(AUDIT_CLASS_SIGNAL_32, parisc32_signal_class);
+#endif
+	audit_register_class(AUDIT_CLASS_WRITE, write_class);
+	audit_register_class(AUDIT_CLASS_READ, read_class);
+	audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
+	audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
+	audit_register_class(AUDIT_CLASS_SIGNAL, signal_class);
+	return 0;
+}
+
+__initcall(audit_classes_init);
diff --git a/arch/parisc/kernel/compat_audit.c b/arch/parisc/kernel/compat_audit.c
new file mode 100644
index 0000000..c74478f6
--- /dev/null
+++ b/arch/parisc/kernel/compat_audit.c
@@ -0,0 +1,40 @@
+#include <asm/unistd.h>
+
+unsigned int parisc32_dir_class[] = {
+#include <asm-generic/audit_dir_write.h>
+~0U
+};
+
+unsigned int parisc32_chattr_class[] = {
+#include <asm-generic/audit_change_attr.h>
+~0U
+};
+
+unsigned int parisc32_write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
+unsigned int parisc32_read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+unsigned int parisc32_signal_class[] = {
+#include <asm-generic/audit_signal.h>
+~0U
+};
+
+int parisc32_classify_syscall(unsigned syscall)
+{
+	switch (syscall) {
+	case __NR_open:
+		return 2;
+	case __NR_openat:
+		return 3;
+	case __NR_execve:
+		return 5;
+	default:
+		return 1;
+	}
+}
diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S
index 37aabd7..d2d5825 100644
--- a/arch/parisc/kernel/head.S
+++ b/arch/parisc/kernel/head.S
@@ -195,6 +195,8 @@ common_stext:
 	ldw             MEM_PDC_HI(%r0),%r6
 	depd            %r6, 31, 32, %r3        /* move to upper word */
 
+	mfctl		%cr30,%r6		/* PCX-W2 firmware bug */
+
 	ldo             PDC_PSW(%r0),%arg0              /* 21 */
 	ldo             PDC_PSW_SET_DEFAULTS(%r0),%arg1 /* 2 */
 	ldo             PDC_PSW_WIDE_BIT(%r0),%arg2     /* 2 */
@@ -203,6 +205,8 @@ common_stext:
 	copy            %r0,%arg3
 
 stext_pdc_ret:
+	mtctl		%r6,%cr30		/* restore task thread info */
+
 	/* restore rfi target address*/
 	ldd             TI_TASK-THREAD_SZ_ALGN(%sp), %r10
 	tophys_r1       %r10
diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index 2e6443b..501ac8b 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -179,10 +179,6 @@ int arch_show_interrupts(struct seq_file *p, int prec)
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", irq_stats(j)->irq_resched_count);
 	seq_puts(p, "  Rescheduling interrupts\n");
-	seq_printf(p, "%*s: ", prec, "CAL");
-	for_each_online_cpu(j)
-		seq_printf(p, "%10u ", irq_stats(j)->irq_call_count);
-	seq_puts(p, "  Function call interrupts\n");
 #endif
 	seq_printf(p, "%*s: ", prec, "UAH");
 	for_each_online_cpu(j)
diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c
index 534abd4..e842ee2 100644
--- a/arch/parisc/kernel/ptrace.c
+++ b/arch/parisc/kernel/ptrace.c
@@ -19,6 +19,7 @@
 #include <linux/security.h>
 #include <linux/compat.h>
 #include <linux/signal.h>
+#include <linux/audit.h>
 
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -267,11 +268,28 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 
 long do_syscall_trace_enter(struct pt_regs *regs)
 {
+	long ret = 0;
+
 	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
 	    tracehook_report_syscall_entry(regs))
-		return -1L;
-
-	return regs->gr[20];
+		ret = -1L;
+
+#ifdef CONFIG_64BIT
+	if (!is_compat_task())
+		audit_syscall_entry(AUDIT_ARCH_PARISC64,
+			regs->gr[20],
+			regs->gr[26], regs->gr[25],
+			regs->gr[24], regs->gr[23]);
+	else
+#endif
+		audit_syscall_entry(AUDIT_ARCH_PARISC,
+			regs->gr[20] & 0xffffffff,
+			regs->gr[26] & 0xffffffff,
+			regs->gr[25] & 0xffffffff,
+			regs->gr[24] & 0xffffffff,
+			regs->gr[23] & 0xffffffff);
+
+	return ret ? : regs->gr[20];
 }
 
 void do_syscall_trace_exit(struct pt_regs *regs)
@@ -279,6 +297,8 @@ void do_syscall_trace_exit(struct pt_regs *regs)
 	int stepping = test_thread_flag(TIF_SINGLESTEP) ||
 		test_thread_flag(TIF_BLOCKSTEP);
 
+	audit_syscall_exit(regs);
+
 	if (stepping || test_thread_flag(TIF_SYSCALL_TRACE))
 		tracehook_report_syscall_exit(regs, stepping);
 }
diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c
index 7349a3f..72a3c65 100644
--- a/arch/parisc/kernel/setup.c
+++ b/arch/parisc/kernel/setup.c
@@ -318,8 +318,12 @@ static int __init parisc_init(void)
 	pdc_stable_write(0x40, &osid, sizeof(osid));
 	
 	processor_init();
-	printk(KERN_INFO "CPU(s): %d x %s at %d.%06d MHz\n",
-			num_present_cpus(),
+#ifdef CONFIG_SMP
+	pr_info("CPU(s): %d out of %d %s at %d.%06d MHz online\n",
+		num_online_cpus(), num_present_cpus(),
+#else
+	pr_info("CPU(s): 1 x %s at %d.%06d MHz\n",
+#endif
 			boot_cpu_data.cpu_name,
 			boot_cpu_data.cpu_hz / 1000000,
 			boot_cpu_data.cpu_hz % 1000000	);
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index 07349b0..1cba8f2 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -78,7 +78,7 @@ restore_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs)
 	err |= __copy_from_user(regs->iaoq, sc->sc_iaoq, sizeof(regs->iaoq));
 	err |= __copy_from_user(regs->iasq, sc->sc_iasq, sizeof(regs->iasq));
 	err |= __get_user(regs->sar, &sc->sc_sar);
-	DBG(2,"restore_sigcontext: iaoq is 0x%#lx / 0x%#lx\n", 
+	DBG(2,"restore_sigcontext: iaoq is %#lx / %#lx\n",
 			regs->iaoq[0],regs->iaoq[1]);
 	DBG(2,"restore_sigcontext: r28 is %ld\n", regs->gr[28]);
 	return err;
diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c
index 8a252f2..ceda229 100644
--- a/arch/parisc/kernel/smp.c
+++ b/arch/parisc/kernel/smp.c
@@ -72,7 +72,6 @@ enum ipi_message_type {
 	IPI_NOP=0,
 	IPI_RESCHEDULE=1,
 	IPI_CALL_FUNC,
-	IPI_CALL_FUNC_SINGLE,
 	IPI_CPU_START,
 	IPI_CPU_STOP,
 	IPI_CPU_TEST
@@ -126,11 +125,6 @@ ipi_interrupt(int irq, void *dev_id)
 	unsigned long ops;
 	unsigned long flags;
 
-	/* Count this now; we may make a call that never returns. */
-	inc_irq_stat(irq_call_count);
-
-	mb();	/* Order interrupt and bit testing. */
-
 	for (;;) {
 		spinlock_t *lock = &per_cpu(ipi_lock, this_cpu);
 		spin_lock_irqsave(lock, flags);
@@ -164,11 +158,6 @@ ipi_interrupt(int irq, void *dev_id)
 				generic_smp_call_function_interrupt();
 				break;
 
-			case IPI_CALL_FUNC_SINGLE:
-				smp_debug(100, KERN_DEBUG "CPU%d IPI_CALL_FUNC_SINGLE\n", this_cpu);
-				generic_smp_call_function_single_interrupt();
-				break;
-
 			case IPI_CPU_START:
 				smp_debug(100, KERN_DEBUG "CPU%d IPI_CPU_START\n", this_cpu);
 				break;
@@ -260,7 +249,7 @@ void arch_send_call_function_ipi_mask(const struct cpumask *mask)
 
 void arch_send_call_function_single_ipi(int cpu)
 {
-	send_IPI_single(cpu, IPI_CALL_FUNC_SINGLE);
+	send_IPI_single(cpu, IPI_CALL_FUNC);
 }
 
 /*
diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S
index e767ab7..a63bb179 100644
--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -649,10 +649,8 @@ cas_action:
 	/* Two exception table entries, one for the load,
 	   the other for the store. Either return -EFAULT.
 	   Each of the entries must be relocated. */
-	.section __ex_table,"aw"
-	ASM_ULONG_INSN (1b - linux_gateway_page), (3b - linux_gateway_page)
-	ASM_ULONG_INSN (2b - linux_gateway_page), (3b - linux_gateway_page)
-	.previous
+	ASM_EXCEPTIONTABLE_ENTRY(1b-linux_gateway_page, 3b-linux_gateway_page)
+	ASM_EXCEPTIONTABLE_ENTRY(2b-linux_gateway_page, 3b-linux_gateway_page)
 
 
 	/* Make sure nothing else is placed on this page */
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index 04e47c6..1cd1d0c 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -291,11 +291,6 @@ void die_if_kernel(char *str, struct pt_regs *regs, long err)
 	do_exit(SIGSEGV);
 }
 
-int syscall_ipi(int (*syscall) (struct pt_regs *), struct pt_regs *regs)
-{
-	return syscall(regs);
-}
-
 /* gdb uses break 4,8 */
 #define GDB_BREAK_INSN 0x10004
 static void handle_gdb_break(struct pt_regs *regs, int wot)
@@ -805,14 +800,14 @@ void notrace handle_interruption(int code, struct pt_regs *regs)
 	else {
 
 	    /*
-	     * The kernel should never fault on its own address space.
+	     * The kernel should never fault on its own address space,
+	     * unless pagefault_disable() was called before.
 	     */
 
-	    if (fault_space == 0) 
+	    if (fault_space == 0 && !in_atomic())
 	    {
 		pdc_chassis_send_status(PDC_CHASSIS_DIRECT_PANIC);
 		parisc_terminate("Kernel Fault", regs, code, fault_address);
-	
 	    }
 	}
 
diff --git a/arch/parisc/lib/Makefile b/arch/parisc/lib/Makefile
index 5651536..8fa92b8 100644
--- a/arch/parisc/lib/Makefile
+++ b/arch/parisc/lib/Makefile
@@ -3,6 +3,6 @@
 #
 
 lib-y	:= lusercopy.o bitops.o checksum.o io.o memset.o fixup.o memcpy.o \
-	   ucmpdi2.o
+	   ucmpdi2.o delay.o
 
 obj-y	:= iomap.o
diff --git a/arch/parisc/lib/delay.c b/arch/parisc/lib/delay.c
new file mode 100644
index 0000000..ec9255f
--- /dev/null
+++ b/arch/parisc/lib/delay.c
@@ -0,0 +1,73 @@
+/*
+ *	Precise Delay Loops for parisc
+ *
+ *	based on code by:
+ *	Copyright (C) 1993 Linus Torvalds
+ *	Copyright (C) 1997 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
+ *	Copyright (C) 2008 Jiri Hladky <hladky _dot_ jiri _at_ gmail _dot_ com>
+ *
+ *	parisc implementation:
+ *	Copyright (C) 2013 Helge Deller <deller@gmx.de>
+ */
+
+
+#include <linux/module.h>
+#include <linux/preempt.h>
+#include <linux/init.h>
+
+#include <asm/processor.h>
+#include <asm/delay.h>
+
+#include <asm/special_insns.h>    /* for mfctl() */
+#include <asm/processor.h> /* for boot_cpu_data */
+
+/* CR16 based delay: */
+static void __cr16_delay(unsigned long __loops)
+{
+	/*
+	 * Note: Due to unsigned math, cr16 rollovers shouldn't be
+	 * a problem here. However, on 32 bit, we need to make sure
+	 * we don't pass in too big a value. The current default
+	 * value of MAX_UDELAY_MS should help prevent this.
+	 */
+	u32 bclock, now, loops = __loops;
+	int cpu;
+
+	preempt_disable();
+	cpu = smp_processor_id();
+	bclock = mfctl(16);
+	for (;;) {
+		now = mfctl(16);
+		if ((now - bclock) >= loops)
+			break;
+
+		/* Allow RT tasks to run */
+		preempt_enable();
+		asm volatile("	nop\n");
+		barrier();
+		preempt_disable();
+
+		/*
+		 * It is possible that we moved to another CPU, and
+		 * since CR16's are per-cpu we need to calculate
+		 * that. The delay must guarantee that we wait "at
+		 * least" the amount of time. Being moved to another
+		 * CPU could make the wait longer but we just need to
+		 * make sure we waited long enough. Rebalance the
+		 * counter for this CPU.
+		 */
+		if (unlikely(cpu != smp_processor_id())) {
+			loops -= (now - bclock);
+			cpu = smp_processor_id();
+			bclock = mfctl(16);
+		}
+	}
+	preempt_enable();
+}
+
+
+void __udelay(unsigned long usecs)
+{
+	__cr16_delay(usecs * ((unsigned long)boot_cpu_data.cpu_hz / 1000000UL));
+}
+EXPORT_SYMBOL(__udelay);
diff --git a/arch/parisc/lib/lusercopy.S b/arch/parisc/lib/lusercopy.S
index 6f2d935..a512f07 100644
--- a/arch/parisc/lib/lusercopy.S
+++ b/arch/parisc/lib/lusercopy.S
@@ -88,9 +88,7 @@ ENDPROC(lclear_user)
 	ldo        1(%r25),%r25
 	.previous
 
-	.section __ex_table,"aw"
-	ASM_ULONG_INSN 1b,2b
-	.previous
+	ASM_EXCEPTIONTABLE_ENTRY(1b,2b)
 
 	.procend
 
@@ -129,10 +127,8 @@ ENDPROC(lstrnlen_user)
 	copy        %r24,%r26    /* reset r26 so 0 is returned on fault */
 	.previous
 
-	.section __ex_table,"aw"
-	ASM_ULONG_INSN 1b,3b
-	ASM_ULONG_INSN 2b,3b
-	.previous
+	ASM_EXCEPTIONTABLE_ENTRY(1b,3b)
+	ASM_EXCEPTIONTABLE_ENTRY(2b,3b)
 
 	.procend
 
diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c
index ac4370b..b5507ec 100644
--- a/arch/parisc/lib/memcpy.c
+++ b/arch/parisc/lib/memcpy.c
@@ -56,7 +56,7 @@
 #ifdef __KERNEL__
 #include <linux/module.h>
 #include <linux/compiler.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #define s_space "%%sr1"
 #define d_space "%%sr2"
 #else
@@ -524,4 +524,17 @@ EXPORT_SYMBOL(copy_to_user);
 EXPORT_SYMBOL(copy_from_user);
 EXPORT_SYMBOL(copy_in_user);
 EXPORT_SYMBOL(memcpy);
+
+long probe_kernel_read(void *dst, const void *src, size_t size)
+{
+	unsigned long addr = (unsigned long)src;
+
+	if (size < 0 || addr < PAGE_SIZE)
+		return -EFAULT;
+
+	/* check for I/O space F_EXTEND(0xfff00000) access as well? */
+
+	return __probe_kernel_read(dst, src, size);
+}
+
 #endif
diff --git a/arch/parisc/math-emu/float.h b/arch/parisc/math-emu/float.h
index ce76f6d..7a51f97 100644
--- a/arch/parisc/math-emu/float.h
+++ b/arch/parisc/math-emu/float.h
@@ -484,7 +484,6 @@ typedef int VOID;
  * |                                                     |G|L|E|U|X|
  * +-------+-------+-------+-------+-------+-------+-------+-------+
  */
-#define Allexception(object) (object)
 #define Greaterthanbit(object) Bitfield_extract( 27, 1,object)
 #define Lessthanbit(object) Bitfield_extract( 28, 1,object)
 #define Equalbit(object) Bitfield_extract( 29, 1,object)
diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c
index f247a34..7584a5d 100644
--- a/arch/parisc/mm/fault.c
+++ b/arch/parisc/mm/fault.c
@@ -142,6 +142,12 @@ int fixup_exception(struct pt_regs *regs)
 {
 	const struct exception_table_entry *fix;
 
+	/* If we only stored 32bit addresses in the exception table we can drop
+	 * out if we faulted on a 64bit address. */
+	if ((sizeof(regs->iaoq[0]) > sizeof(fix->insn))
+		&& (regs->iaoq[0] >> 32))
+			return 0;
+
 	fix = search_exception_tables(regs->iaoq[0]);
 	if (fix) {
 		struct exception_data *d;
@@ -171,15 +177,27 @@ void do_page_fault(struct pt_regs *regs, unsigned long code,
 			      unsigned long address)
 {
 	struct vm_area_struct *vma, *prev_vma;
-	struct task_struct *tsk = current;
-	struct mm_struct *mm = tsk->mm;
+	struct task_struct *tsk;
+	struct mm_struct *mm;
 	unsigned long acc_type;
 	int fault;
-	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
+	unsigned int flags;
+
+	if (in_atomic())
+		goto no_context;
 
-	if (in_atomic() || !mm)
+	tsk = current;
+	mm = tsk->mm;
+	if (!mm)
 		goto no_context;
 
+	flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
+	if (user_mode(regs))
+		flags |= FAULT_FLAG_USER;
+
+	acc_type = parisc_acctyp(code, regs->iir);
+	if (acc_type & VM_WRITE)
+		flags |= FAULT_FLAG_WRITE;
 retry:
 	down_read(&mm->mmap_sem);
 	vma = find_vma_prev(mm, address, &prev_vma);
@@ -192,8 +210,6 @@ retry:
 
 good_area:
 
-	acc_type = parisc_acctyp(code,regs->iir);
-
 	if ((vma->vm_flags & acc_type) != acc_type)
 		goto bad_area;
 
@@ -203,8 +219,7 @@ good_area:
 	 * fault.
 	 */
 
-	fault = handle_mm_fault(mm, vma, address,
-			flags | ((acc_type & VM_WRITE) ? FAULT_FLAG_WRITE : 0));
+	fault = handle_mm_fault(mm, vma, address, flags);
 
 	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
 		return;
@@ -265,12 +280,22 @@ bad_area:
 		}
 		show_regs(regs);
 #endif
-		/* FIXME: actually we need to get the signo and code correct */
-		si.si_signo = SIGSEGV;
+		switch (code) {
+		case 15:	/* Data TLB miss fault/Data page fault */
+		case 17:	/* NA data TLB miss / page fault */
+		case 18:	/* Unaligned access - PCXS only */
+			si.si_signo = SIGBUS;
+			si.si_code = BUS_ADRERR;
+			break;
+		case 16:	/* Non-access instruction TLB miss fault */
+		case 26:	/* PCXL: Data memory access rights trap */
+		default:
+			si.si_signo = SIGSEGV;
+			si.si_code = SEGV_MAPERR;
+		}
 		si.si_errno = 0;
-		si.si_code = SEGV_MAPERR;
 		si.si_addr = (void __user *) address;
-		force_sig_info(SIGSEGV, &si, current);
+		force_sig_info(si.si_signo, &si, current);
 		return;
 	}
 
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 9cf59816d..38f3b7e 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -114,7 +114,6 @@ config PPC
 	select HAVE_PERF_EVENTS
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS && PPC_BOOK3S_64
-	select HAVE_GENERIC_HARDIRQS
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select SPARSE_IRQ
 	select IRQ_DOMAIN
@@ -312,6 +311,26 @@ config MATH_EMULATION
 	  such as fsqrt on cores that do have an FPU but do not implement
 	  them (such as Freescale BookE).
 
+choice
+	prompt "Math emulation options"
+	default MATH_EMULATION_FULL
+	depends on MATH_EMULATION
+
+config	MATH_EMULATION_FULL
+	bool "Emulate all the floating point instructions"
+	---help---
+	  Select this option will enable the kernel to support to emulate
+	  all the floating point instructions. If your SoC doesn't have
+	  a FPU, you should select this.
+
+config MATH_EMULATION_HW_UNIMPLEMENTED
+	bool "Just emulate the FPU unimplemented instructions"
+	---help---
+	  Select this if you know there does have a hardware FPU on your
+	  SoC, but some floating point instructions are not implemented by that.
+
+endchoice
+
 config PPC_TRANSACTIONAL_MEM
        bool "Transactional Memory support for POWERPC"
        depends on PPC_BOOK3S_64
@@ -369,9 +388,9 @@ config KEXEC
 
 	  It is an ongoing process to be certain the hardware in a machine
 	  is properly shutdown, so do not be surprised if this code does not
-	  initially work for you.  It may help to enable device hotplugging
-	  support.  As of this writing the exact hardware interface is
-	  strongly in flux, so no good recommendation can be made.
+	  initially work for you.  As of this writing the exact hardware
+	  interface is strongly in flux, so no good recommendation can be
+	  made.
 
 config CRASH_DUMP
 	bool "Build a kdump crash kernel"
@@ -727,7 +746,6 @@ config PCI
 	default y if !40x && !CPM2 && !8xx && !PPC_83xx \
 		&& !PPC_85xx && !PPC_86xx && !GAMECUBE_COMMON
 	default PCI_QSPAN if !4xx && !CPM2 && 8xx
-	select ARCH_SUPPORTS_MSI
 	select GENERIC_PCI_IOMAP
 	help
 	  Find out whether your system includes a PCI bus. PCI is the name of
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 967fd23..51cfb78 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -88,13 +88,30 @@ CFLAGS-$(CONFIG_PPC64)	+= $(call cc-option,-mcmodel=medium,-mminimal-toc)
 CFLAGS-$(CONFIG_PPC64)	+= $(call cc-option,-mno-pointers-to-nested-functions)
 CFLAGS-$(CONFIG_PPC32)	:= -ffixed-r2 -mmultiple
 
+ifeq ($(CONFIG_PPC_BOOK3S_64),y)
 CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=power7,-mtune=power4)
+else
+CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=powerpc64
+endif
+
 CFLAGS-$(CONFIG_CELL_CPU) += $(call cc-option,-mcpu=cell)
 CFLAGS-$(CONFIG_POWER4_CPU) += $(call cc-option,-mcpu=power4)
 CFLAGS-$(CONFIG_POWER5_CPU) += $(call cc-option,-mcpu=power5)
 CFLAGS-$(CONFIG_POWER6_CPU) += $(call cc-option,-mcpu=power6)
 CFLAGS-$(CONFIG_POWER7_CPU) += $(call cc-option,-mcpu=power7)
 
+E5500_CPU := $(call cc-option,-mcpu=e500mc64,-mcpu=powerpc64)
+CFLAGS-$(CONFIG_E5500_CPU) += $(E5500_CPU)
+CFLAGS-$(CONFIG_E6500_CPU) += $(call cc-option,-mcpu=e6500,$(E5500_CPU))
+
+ifeq ($(CONFIG_PPC32),y)
+ifeq ($(CONFIG_PPC_E500MC),y)
+CFLAGS-y += $(call cc-option,-mcpu=e500mc,-mcpu=powerpc)
+else
+CFLAGS-$(CONFIG_E500) += $(call cc-option,-mcpu=8540 -msoft-float,-mcpu=powerpc)
+endif
+endif
+
 CFLAGS-$(CONFIG_TUNE_CELL) += $(call cc-option,-mtune=cell)
 
 KBUILD_CPPFLAGS	+= -Iarch/$(ARCH)
@@ -139,7 +156,6 @@ endif
 
 cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
 cpu-as-$(CONFIG_ALTIVEC)	+= -Wa,-maltivec
-cpu-as-$(CONFIG_E500)		+= -Wa,-me500
 cpu-as-$(CONFIG_E200)		+= -Wa,-me200
 
 KBUILD_AFLAGS += $(cpu-as-y)
diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore
index c32ae5c..554734f 100644
--- a/arch/powerpc/boot/.gitignore
+++ b/arch/powerpc/boot/.gitignore
@@ -22,6 +22,7 @@ zImage.initrd
 zImage.bin.*
 zImage.chrp
 zImage.coff
+zImage.epapr
 zImage.holly
 zImage.*lds
 zImage.miboot
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 6a15c96..15ca225 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -74,7 +74,7 @@ src-wlib-$(CONFIG_8xx) += mpc8xx.c planetcore.c
 src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c
 src-wlib-$(CONFIG_EMBEDDED6xx) += mv64x60.c mv64x60_i2c.c ugecon.c
 
-src-plat-y := of.c
+src-plat-y := of.c epapr.c
 src-plat-$(CONFIG_40x) += fixed-head.S ep405.c cuboot-hotfoot.c \
 				treeboot-walnut.c cuboot-acadia.c \
 				cuboot-kilauea.c simpleboot.c \
@@ -97,7 +97,7 @@ src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \
 					prpmc2800.c
 src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c
 src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c
-src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c
+src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c
 
 src-wlib := $(sort $(src-wlib-y))
 src-plat := $(sort $(src-plat-y))
diff --git a/arch/powerpc/boot/dts/ac14xx.dts b/arch/powerpc/boot/dts/ac14xx.dts
index a27a460..a543c40 100644
--- a/arch/powerpc/boot/dts/ac14xx.dts
+++ b/arch/powerpc/boot/dts/ac14xx.dts
@@ -10,7 +10,7 @@
  */
 
 
-/include/ "mpc5121.dtsi"
+#include <mpc5121.dtsi>
 
 / {
 	model = "ac14xx";
diff --git a/arch/powerpc/boot/dts/b4420qds.dts b/arch/powerpc/boot/dts/b4420qds.dts
index 923156d0..508dbdf 100644
--- a/arch/powerpc/boot/dts/b4420qds.dts
+++ b/arch/powerpc/boot/dts/b4420qds.dts
@@ -33,7 +33,7 @@
  */
 
 /include/ "fsl/b4420si-pre.dtsi"
-/include/ "b4qds.dts"
+/include/ "b4qds.dtsi"
 
 / {
 	model = "fsl,B4420QDS";
diff --git a/arch/powerpc/boot/dts/b4860qds.dts b/arch/powerpc/boot/dts/b4860qds.dts
index 78907f3..6bb3707 100644
--- a/arch/powerpc/boot/dts/b4860qds.dts
+++ b/arch/powerpc/boot/dts/b4860qds.dts
@@ -33,7 +33,7 @@
  */
 
 /include/ "fsl/b4860si-pre.dtsi"
-/include/ "b4qds.dts"
+/include/ "b4qds.dtsi"
 
 / {
 	model = "fsl,B4860QDS";
diff --git a/arch/powerpc/boot/dts/b4qds.dts b/arch/powerpc/boot/dts/b4qds.dtsi
index e6d2f8f..e6d2f8f 100644
--- a/arch/powerpc/boot/dts/b4qds.dts
+++ b/arch/powerpc/boot/dts/b4qds.dtsi
diff --git a/arch/powerpc/boot/dts/c293pcie.dts b/arch/powerpc/boot/dts/c293pcie.dts
new file mode 100644
index 0000000..1238bda
--- /dev/null
+++ b/arch/powerpc/boot/dts/c293pcie.dts
@@ -0,0 +1,223 @@
+/*
+ * C293 PCIE Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/c293si-pre.dtsi"
+
+/ {
+	model = "fsl,C293PCIE";
+	compatible = "fsl,C293PCIE";
+
+	memory {
+		device_type = "memory";
+	};
+
+	ifc: ifc@fffe1e000 {
+		reg = <0xf 0xffe1e000 0 0x2000>;
+		ranges = <0x0 0x0 0xf 0xec000000 0x04000000
+			  0x2 0x0 0xf 0xffdf0000 0x00010000>;
+
+	};
+
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+&ifc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x4000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* 1MB for DTB Image */
+			reg = <0x0 0x00100000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@100000 {
+			/* 8 MB for Linux Kernel Image */
+			reg = <0x00100000 0x00800000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@900000 {
+			/* 53MB for rootfs */
+			reg = <0x00900000 0x03500000>;
+			label = "NOR Rootfs Image";
+		};
+
+		partition@3e00000 {
+			/* 1MB for blob encrypted key */
+			reg = <0x03e00000 0x00100000>;
+			label = "NOR blob encrypted key";
+		};
+
+		partition@3f00000 {
+			/* 512KB for u-boot Bootloader Image and evn */
+			reg = <0x03f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,ifc-nand";
+		reg = <0x1 0x0 0x10000>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 1MB for u-boot Bootloader Image */
+			reg = <0x0 0x00100000>;
+			label = "NAND U-Boot Image";
+			read-only;
+		};
+
+		partition@100000 {
+			/* 1MB for DTB Image */
+			reg = <0x00100000 0x00100000>;
+			label = "NAND DTB Image";
+		};
+
+		partition@200000 {
+			/* 16MB for Linux Kernel Image */
+			reg = <0x00200000 0x01000000>;
+			label = "NAND Linux Kernel Image";
+		};
+
+		partition@1200000 {
+			/* 4078MB for Root file System Image */
+			reg = <0x00600000 0xfee00000>;
+			label = "NAND RFS Image";
+		};
+	};
+
+	cpld@2,0 {
+		compatible = "fsl,c293pcie-cpld";
+		reg = <0x2 0x0 0x20>;
+	};
+};
+
+&soc {
+	i2c@3000 {
+		eeprom@50 {
+			compatible = "st,24c1024";
+			reg = <0x50>;
+		};
+
+		adt7461@4c {
+			compatible = "adi,adt7461";
+			reg = <0x4c>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+
+			partition@0 {
+				/* 1MB for u-boot Bootloader Image */
+				/* 1MB for Environment */
+				reg = <0x0 0x00100000>;
+				label = "SPI Flash U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 512KB for DTB Image */
+				reg = <0x00100000 0x00080000>;
+				label = "SPI Flash DTB Image";
+			};
+
+			partition@180000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00180000 0x00400000>;
+				label = "SPI Flash Linux Kernel Image";
+			};
+
+			partition@580000 {
+				/* 10.5MB for RFS Image */
+				reg = <0x00580000 0x00a80000>;
+				label = "SPI Flash RFS Image";
+			};
+		};
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupts = <2 1 0 0>;
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			interrupts = <2 1 0 0>;
+			reg = <0x2>;
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};
+/include/ "fsl/c293si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
index 7399154..4c617bf 100644
--- a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
@@ -204,7 +204,7 @@
 		};
 	};
 
-/include/ "qoriq-mpic.dtsi"
+/include/ "qoriq-mpic4.3.dtsi"
 
 	guts: global-utilities@e0000 {
 		compatible = "fsl,b4-device-config";
diff --git a/arch/powerpc/boot/dts/fsl/c293si-post.dtsi b/arch/powerpc/boot/dts/fsl/c293si-post.dtsi
new file mode 100644
index 0000000..bd20832
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/c293si-post.dtsi
@@ -0,0 +1,193 @@
+/*
+ * C293 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+/* controller at 0xa000 */
+&pci0 {
+	compatible = "fsl,qoriq-pcie-v2.2", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,c293-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,c293-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+	spi0: spi@7000 {
+		fsl,espi-num-chipselects = <1>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,c293-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x80000>; // L2,512K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		compatible = "fsl,c293-esdhc", "fsl,esdhc";
+		sdhci,auto-cmd12;
+	};
+
+	crypto@80000 {
+/include/ "qoriq-sec6.0-0.dtsi"
+	};
+
+	crypto@80000 {
+		reg = <0x80000 0x20000>;
+		ranges = <0x0 0x80000 0x20000>;
+
+		jr@1000{
+			interrupts = <45 2 0 0>;
+		};
+		jr@2000{
+			interrupts = <57 2 0 0>;
+		};
+	};
+
+	crypto@a0000 {
+/include/ "qoriq-sec6.0-0.dtsi"
+	};
+
+	crypto@a0000 {
+		reg = <0xa0000 0x20000>;
+		ranges = <0x0 0xa0000 0x20000>;
+
+		jr@1000{
+			interrupts = <49 2 0 0>;
+		};
+		jr@2000{
+			interrupts = <50 2 0 0>;
+		};
+	};
+
+	crypto@c0000 {
+/include/ "qoriq-sec6.0-0.dtsi"
+	};
+
+	crypto@c0000 {
+		reg = <0xc0000 0x20000>;
+		ranges = <0x0 0xc0000 0x20000>;
+
+		jr@1000{
+			interrupts = <55 2 0 0>;
+		};
+		jr@2000{
+			interrupts = <56 2 0 0>;
+		};
+	};
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+	enet0: ethernet@b0000 {
+		queue-group@b0000 {
+			reg = <0x10000 0x1000>;
+			fsl,rx-bit-map = <0xff>;
+			fsl,tx-bit-map = <0xff>;
+		};
+	};
+
+/include/ "pq3-etsec2-1.dtsi"
+	enet1: ethernet@b1000 {
+		queue-group@b1000 {
+			reg = <0x11000 0x1000>;
+			fsl,rx-bit-map = <0xff>;
+			fsl,tx-bit-map = <0xff>;
+		};
+	};
+
+	global-utilities@e0000 {
+		compatible = "fsl,c293-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/c293si-pre.dtsi b/arch/powerpc/boot/dts/fsl/c293si-pre.dtsi
new file mode 100644
index 0000000..065049d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/c293si-pre.dtsi
@@ -0,0 +1,63 @@
+/*
+ * C293 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,C293";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,e500v2@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-mpic4.3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-mpic4.3.dtsi
new file mode 100644
index 0000000..64f713c
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-mpic4.3.dtsi
@@ -0,0 +1,149 @@
+/*
+ * QorIQ MPIC device tree stub [ controller @ offset 0x40000 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+mpic: pic@40000 {
+	interrupt-controller;
+	#address-cells = <0>;
+	#interrupt-cells = <4>;
+	reg = <0x40000 0x40000>;
+	compatible = "fsl,mpic";
+	device_type = "open-pic";
+	clock-frequency = <0x0>;
+};
+
+timer@41100 {
+	compatible = "fsl,mpic-global-timer";
+	reg = <0x41100 0x100 0x41300 4>;
+	interrupts = <0 0 3 0
+		      1 0 3 0
+		      2 0 3 0
+		      3 0 3 0>;
+};
+
+msi0: msi@41600 {
+	compatible = "fsl,mpic-msi-v4.3";
+	reg = <0x41600 0x200 0x44148 4>;
+	interrupts = <
+		0xe0 0 0 0
+		0xe1 0 0 0
+		0xe2 0 0 0
+		0xe3 0 0 0
+		0xe4 0 0 0
+		0xe5 0 0 0
+		0xe6 0 0 0
+		0xe7 0 0 0
+		0x100 0 0 0
+		0x101 0 0 0
+		0x102 0 0 0
+		0x103 0 0 0
+		0x104 0 0 0
+		0x105 0 0 0
+		0x106 0 0 0
+		0x107 0 0 0>;
+};
+
+msi1: msi@41800 {
+	compatible = "fsl,mpic-msi-v4.3";
+	reg = <0x41800 0x200 0x45148 4>;
+	interrupts = <
+		0xe8 0 0 0
+		0xe9 0 0 0
+		0xea 0 0 0
+		0xeb 0 0 0
+		0xec 0 0 0
+		0xed 0 0 0
+		0xee 0 0 0
+		0xef 0 0 0
+		0x108 0 0 0
+		0x109 0 0 0
+		0x10a 0 0 0
+		0x10b 0 0 0
+		0x10c 0 0 0
+		0x10d 0 0 0
+		0x10e 0 0 0
+		0x10f 0 0 0>;
+};
+
+msi2: msi@41a00 {
+	compatible = "fsl,mpic-msi-v4.3";
+	reg = <0x41a00 0x200 0x46148 4>;
+	interrupts = <
+		0xf0 0 0 0
+		0xf1 0 0 0
+		0xf2 0 0 0
+		0xf3 0 0 0
+		0xf4 0 0 0
+		0xf5 0 0 0
+		0xf6 0 0 0
+		0xf7 0 0 0
+		0x110 0 0 0
+		0x111 0 0 0
+		0x112 0 0 0
+		0x113 0 0 0
+		0x114 0 0 0
+		0x115 0 0 0
+		0x116 0 0 0
+		0x117 0 0 0>;
+};
+
+msi3: msi@41c00 {
+	compatible = "fsl,mpic-msi-v4.3";
+	reg = <0x41c00 0x200 0x47148 4>;
+	interrupts = <
+		0xf8 0 0 0
+		0xf9 0 0 0
+		0xfa 0 0 0
+		0xfb 0 0 0
+		0xfc 0 0 0
+		0xfd 0 0 0
+		0xfe 0 0 0
+		0xff 0 0 0
+		0x118 0 0 0
+		0x119 0 0 0
+		0x11a 0 0 0
+		0x11b 0 0 0
+		0x11c 0 0 0
+		0x11d 0 0 0
+		0x11e 0 0 0
+		0x11f 0 0 0>;
+};
+
+timer@42100 {
+	compatible = "fsl,mpic-global-timer";
+	reg = <0x42100 0x100 0x42300 4>;
+	interrupts = <4 0 3 0
+		      5 0 3 0
+		      6 0 3 0
+		      7 0 3 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi
new file mode 100644
index 0000000..f75b4f820
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi
@@ -0,0 +1,56 @@
+/*
+ * QorIQ Sec/Crypto 6.0 device tree stub
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+	compatible = "fsl,sec-v6.0";
+	fsl,sec-era = <6>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	jr@1000 {
+		compatible = "fsl,sec-v6.0-job-ring",
+			     "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.4-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg	   = <0x1000 0x1000>;
+	};
+
+	jr@2000 {
+		compatible = "fsl,sec-v6.0-job-ring",
+			     "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.4-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg	   = <0x2000 0x1000>;
+	};
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
index bd611a9c..510afa3 100644
--- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
@@ -358,7 +358,7 @@
 			16 2 1 30>;
 	};
 
-/include/ "qoriq-mpic.dtsi"
+/include/ "qoriq-mpic4.3.dtsi"
 
 	guts: global-utilities@e0000 {
 		compatible = "fsl,t4240-device-config", "fsl,qoriq-device-config-2.0";
diff --git a/arch/powerpc/boot/dts/include/dt-bindings b/arch/powerpc/boot/dts/include/dt-bindings
new file mode 120000
index 0000000..08c00e4
--- /dev/null
+++ b/arch/powerpc/boot/dts/include/dt-bindings
@@ -0,0 +1 @@
+../../../../../include/dt-bindings
\ No newline at end of file
diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts
index 7d3cb79..c228a0a 100644
--- a/arch/powerpc/boot/dts/mpc5121ads.dts
+++ b/arch/powerpc/boot/dts/mpc5121ads.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "mpc5121.dtsi"
+#include <mpc5121.dtsi>
 
 / {
 	model = "mpc5121ads";
diff --git a/arch/powerpc/boot/dts/p1020rdb-pd.dts b/arch/powerpc/boot/dts/p1020rdb-pd.dts
new file mode 100644
index 0000000..987017e
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1020rdb-pd.dts
@@ -0,0 +1,280 @@
+/*
+ * P1020 RDB-PD Device Tree Source (32-bit address map)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020RDB-PD";
+	compatible = "fsl,P1020RDB-PD";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0x0 0xffe05000 0x0 0x1000>;
+
+		/* NOR, NAND flash, L2 switch and CPLD */
+		ranges = <0x0 0x0 0x0 0xec000000 0x04000000
+			  0x1 0x0 0x0 0xff800000 0x00040000
+			  0x2 0x0 0x0 0xffa00000 0x00020000
+			  0x3 0x0 0x0 0xffb00000 0x00020000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x4000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				/* 128KB for DTB Image */
+				reg = <0x0 0x00020000>;
+				label = "NOR DTB Image";
+			};
+
+			partition@20000 {
+				/* 3.875 MB for Linux Kernel Image */
+				reg = <0x00020000 0x003e0000>;
+				label = "NOR Linux Kernel Image";
+			};
+
+			partition@400000 {
+				/* 58MB for Root file System */
+				reg = <0x00400000 0x03a00000>;
+				label = "NOR Root File System";
+			};
+
+			partition@3e00000 {
+				/* This location must not be altered  */
+				/* 1M for Vitesse 7385 Switch firmware */
+				reg = <0x3e00000 0x00100000>;
+				label = "NOR Vitesse-7385 Firmware";
+				read-only;
+			};
+
+			partition@3f00000 {
+				/* This location must not be altered  */
+				/* 512KB for u-boot Bootloader Image */
+				/* 512KB for u-boot Environment Variables */
+				reg = <0x03f00000 0x00100000>;
+				label = "NOR U-Boot Image";
+				read-only;
+			};
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1020-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x40000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND DTB Image";
+			};
+
+			partition@200000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00200000 0x00400000>;
+				label = "NAND Linux Kernel Image";
+			};
+
+			partition@600000 {
+				/* 122MB for File System Image */
+				reg = <0x00600000 0x07a00000>;
+				label = "NAND File System Image";
+			};
+		};
+
+		cpld@2,0 {
+			compatible = "fsl,p1020rdb-pd-cpld";
+			reg = <0x2 0x0 0x20000>;
+		};
+
+		L2switch@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "vitesse-7385";
+			reg = <0x3 0x0 0x20000>;
+		};
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+
+		i2c@3000 {
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+		};
+
+		spi@7000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25sl12801";
+				reg = <0>;
+				/* input clock */
+				spi-max-frequency = <40000000>;
+
+				partition@0 {
+					/* 512KB for u-boot Bootloader Image */
+					reg = <0x0 0x00080000>;
+					label = "SPI U-Boot Image";
+					read-only;
+				};
+
+				partition@80000 {
+					/* 512KB for DTB Image*/
+					reg = <0x00080000 0x00080000>;
+					label = "SPI DTB Image";
+				};
+
+				partition@100000 {
+					/* 4MB for Linux Kernel Image */
+					reg = <0x00100000 0x00400000>;
+					label = "SPI Linux Kernel Image";
+				};
+
+				partition@500000 {
+					/* 11MB for FS System Image */
+					reg = <0x00500000 0x00b00000>;
+					label = "SPI File System Image";
+				};
+			};
+
+			slic@0 {
+				compatible = "zarlink,le88266";
+				reg = <1>;
+				spi-max-frequency = <8000000>;
+			};
+
+			slic@1 {
+				compatible = "zarlink,le88266";
+				reg = <2>;
+				spi-max-frequency = <8000000>;
+			};
+		};
+
+		mdio@24000 {
+			phy0: ethernet-phy@0 {
+				interrupts = <3 1 0 0>;
+				reg = <0x0>;
+			};
+
+			phy1: ethernet-phy@1 {
+				interrupts = <2 1 0 0>;
+				reg = <0x1>;
+			};
+		};
+
+		mdio@25000 {
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@26000 {
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet0: ethernet@b0000 {
+			fixed-link = <1 1 1000 0 0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		enet1: ethernet@b1000 {
+			phy-handle = <&phy0>;
+			tbi-handle = <&tbi1>;
+			phy-connection-type = "sgmii";
+		};
+
+		enet2: ethernet@b2000 {
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		usb@22000 {
+			phy_type = "ulpi";
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		reg = <0x0 0xffe09000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0x0 0xffe0a000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "fsl/p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1023rdb.dts b/arch/powerpc/boot/dts/p1023rdb.dts
new file mode 100644
index 0000000..0a06a88
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1023rdb.dts
@@ -0,0 +1,234 @@
+/*
+ * P1023 RDB Device Tree Source
+ *
+ *    Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Author: Chunhe Lan <Chunhe.Lan@freescale.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1023si-pre.dtsi"
+
+/ {
+	model = "fsl,P1023";
+	compatible = "fsl,P1023RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	memory {
+		device_type = "memory";
+	};
+
+	soc: soc@ff600000 {
+		ranges = <0x0 0x0 0xff600000 0x200000>;
+
+		i2c@3000 {
+			eeprom@53 {
+				compatible = "at24,24c04";
+				reg = <0x53>;
+			};
+
+			rtc@6f {
+				compatible = "microchip,mcp7941x";
+				reg = <0x6f>;
+			};
+		};
+
+		usb@22000 {
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
+	};
+
+	lbc: localbus@ff605000 {
+		reg = <0 0xff605000 0 0x1000>;
+
+		/* NOR, NAND Flashes */
+		ranges = <0x0 0x0 0x0 0xec000000 0x04000000
+			  0x1 0x0 0x0 0xffa00000 0x08000000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x04000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				/* 48MB for Root File System */
+				reg = <0x00000000 0x03000000>;
+				label = "NOR Root File System";
+			};
+
+			partition@3000000 {
+				/* 1MB for DTB Image */
+				reg = <0x03000000 0x00100000>;
+				label = "NOR DTB Image";
+			};
+
+			partition@3100000 {
+				/* 14MB for Linux Kernel Image */
+				reg = <0x03100000 0x00e00000>;
+				label = "NOR Linux Kernel Image";
+			};
+
+			partition@3f00000 {
+				/* This location must not be altered  */
+				/* 512KB for u-boot Bootloader Image */
+				/* 512KB for u-boot Environment Variables */
+				reg = <0x03f00000 0x00100000>;
+				label = "NOR U-Boot Image";
+				read-only;
+			};
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x40000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND DTB Image";
+			};
+
+			partition@200000 {
+				/* 14MB for Linux Kernel Image */
+				reg = <0x00200000 0x00e00000>;
+				label = "NAND Linux Kernel Image";
+			};
+
+			partition@1000000 {
+				/* 96MB for Root File System Image */
+				reg = <0x01000000 0x06000000>;
+				label = "NAND Root File System";
+			};
+
+			partition@7000000 {
+				/* 16MB for User Writable Area */
+				reg = <0x07000000 0x01000000>;
+				label = "NAND Writable User area";
+			};
+		};
+	};
+
+	pci0: pcie@ff60a000 {
+		reg = <0 0xff60a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		pcie@0 {
+			/* IRQ[0:3] are pulled up on board, set to active-low */
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 0x0 */
+				0000 0 0 1 &mpic 0 1 0 0
+				0000 0 0 2 &mpic 1 1 0 0
+				0000 0 0 3 &mpic 2 1 0 0
+				0000 0 0 4 &mpic 3 1 0 0
+				>;
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	board_pci1: pci1: pcie@ff609000 {
+		reg = <0 0xff609000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			/*
+			 * IRQ[4:6] only for PCIe, set to active-high,
+			 * IRQ[7] is pulled up on board, set to active-low
+			 */
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 0x0 */
+				0000 0 0 1 &mpic 4 2 0 0
+				0000 0 0 2 &mpic 5 2 0 0
+				0000 0 0 3 &mpic 6 2 0 0
+				0000 0 0 4 &mpic 7 1 0 0
+				>;
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci2: pcie@ff60b000 {
+		reg = <0 0xff60b000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			/*
+			 * IRQ[8:10] are pulled up on board, set to active-low
+			 * IRQ[11] only for PCIe, set to active-high,
+			 */
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 0x0 */
+				0000 0 0 1 &mpic 8 1 0 0
+				0000 0 0 2 &mpic 9 1 0 0
+				0000 0 0 3 &mpic 10 1 0 0
+				0000 0 0 4 &mpic 11 2 0 0
+				>;
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+};
+
+/include/ "fsl/p1023si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/pdm360ng.dts b/arch/powerpc/boot/dts/pdm360ng.dts
index 7433740..871c16d 100644
--- a/arch/powerpc/boot/dts/pdm360ng.dts
+++ b/arch/powerpc/boot/dts/pdm360ng.dts
@@ -13,7 +13,7 @@
  * option) any later version.
  */
 
-/include/ "mpc5121.dtsi"
+#include <mpc5121.dtsi>
 
 / {
 	model = "pdm360ng";
diff --git a/arch/powerpc/boot/epapr-wrapper.c b/arch/powerpc/boot/epapr-wrapper.c
new file mode 100644
index 0000000..c101910
--- /dev/null
+++ b/arch/powerpc/boot/epapr-wrapper.c
@@ -0,0 +1,9 @@
+extern void epapr_platform_init(unsigned long r3, unsigned long r4,
+				unsigned long r5, unsigned long r6,
+				unsigned long r7);
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		   unsigned long r6, unsigned long r7)
+{
+	epapr_platform_init(r3, r4, r5, r6, r7);
+}
diff --git a/arch/powerpc/boot/epapr.c b/arch/powerpc/boot/epapr.c
index 06c1961..02e91aa 100644
--- a/arch/powerpc/boot/epapr.c
+++ b/arch/powerpc/boot/epapr.c
@@ -48,8 +48,8 @@ static void platform_fixups(void)
 		       fdt_addr, fdt_totalsize((void *)fdt_addr), ima_size);
 }
 
-void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-		   unsigned long r6, unsigned long r7)
+void epapr_platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+			 unsigned long r6, unsigned long r7)
 {
 	epapr_magic = r6;
 	ima_size = r7;
diff --git a/arch/powerpc/boot/of.c b/arch/powerpc/boot/of.c
index 61d9899..62e2f43 100644
--- a/arch/powerpc/boot/of.c
+++ b/arch/powerpc/boot/of.c
@@ -26,6 +26,9 @@
 
 static unsigned long claim_base;
 
+void epapr_platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+			 unsigned long r6, unsigned long r7);
+
 static void *of_try_claim(unsigned long size)
 {
 	unsigned long addr = 0;
@@ -61,7 +64,7 @@ static void of_image_hdr(const void *hdr)
 	}
 }
 
-void platform_init(unsigned long a1, unsigned long a2, void *promptr)
+static void of_platform_init(unsigned long a1, unsigned long a2, void *promptr)
 {
 	platform_ops.image_hdr = of_image_hdr;
 	platform_ops.malloc = of_try_claim;
@@ -81,3 +84,14 @@ void platform_init(unsigned long a1, unsigned long a2, void *promptr)
 		loader_info.initrd_size = a2;
 	}
 }
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		   unsigned long r6, unsigned long r7)
+{
+	/* Detect OF vs. ePAPR boot */
+	if (r5)
+		of_platform_init(r3, r4, (void *)r5);
+	else
+		epapr_platform_init(r3, r4, r5, r6, r7);
+}
+
diff --git a/arch/powerpc/boot/ppc_asm.h b/arch/powerpc/boot/ppc_asm.h
index 1c2c281..eb0e98b 100644
--- a/arch/powerpc/boot/ppc_asm.h
+++ b/arch/powerpc/boot/ppc_asm.h
@@ -59,4 +59,7 @@
 #define	r30	30
 #define	r31	31
 
+#define SPRN_TBRL	268
+#define SPRN_TBRU	269
+
 #endif /* _PPC64_PPC_ASM_H */
diff --git a/arch/powerpc/boot/util.S b/arch/powerpc/boot/util.S
index 427ddfc..5143228 100644
--- a/arch/powerpc/boot/util.S
+++ b/arch/powerpc/boot/util.S
@@ -71,18 +71,18 @@ udelay:
 	add	r4,r4,r5
 	addi	r4,r4,-1
 	divw	r4,r4,r5	/* BUS ticks */
-1:	mftbu	r5
-	mftb	r6
-	mftbu	r7
+1:	mfspr	r5, SPRN_TBRU
+	mfspr	r6, SPRN_TBRL
+	mfspr	r7, SPRN_TBRU
 	cmpw	0,r5,r7
 	bne	1b		/* Get [synced] base time */
 	addc	r9,r6,r4	/* Compute end time */
 	addze	r8,r5
-2:	mftbu	r5
+2:	mfspr	r5, SPRN_TBRU
 	cmpw	0,r5,r8
 	blt	2b
 	bgt	3f
-	mftb	r6
+	mfspr	r6, SPRN_TBRL
 	cmpw	0,r6,r9
 	blt	2b
 3:	blr
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 6761c74..cd7af84 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -148,18 +148,18 @@ make_space=y
 
 case "$platform" in
 pseries)
-    platformo=$object/of.o
+    platformo="$object/of.o $object/epapr.o"
     link_address='0x4000000'
     ;;
 maple)
-    platformo=$object/of.o
+    platformo="$object/of.o $object/epapr.o"
     link_address='0x400000'
     ;;
 pmac|chrp)
-    platformo=$object/of.o
+    platformo="$object/of.o $object/epapr.o"
     ;;
 coff)
-    platformo="$object/crt0.o $object/of.o"
+    platformo="$object/crt0.o $object/of.o $object/epapr.o"
     lds=$object/zImage.coff.lds
     link_address='0x500000'
     pie=
@@ -253,6 +253,7 @@ treeboot-iss4xx-mpic)
     platformo="$object/treeboot-iss4xx.o"
     ;;
 epapr)
+    platformo="$object/epapr.o $object/epapr-wrapper.o"
     link_address='0x20000000'
     pie=-pie
     ;;
diff --git a/arch/powerpc/configs/85xx/p1023rds_defconfig b/arch/powerpc/configs/85xx/p1023_defconfig
index b80bcc6..b06d37d 100644
--- a/arch/powerpc/configs/85xx/p1023rds_defconfig
+++ b/arch/powerpc/configs/85xx/p1023_defconfig
@@ -1,14 +1,13 @@
 CONFIG_PPC_85xx=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_AUDIT=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -22,6 +21,8 @@ CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_MAC_PARTITION=y
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_P1023_RDB=y
 CONFIG_P1023_RDS=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
@@ -63,10 +64,21 @@ CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_LEGACY=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
@@ -82,6 +94,8 @@ CONFIG_DUMMY=y
 CONFIG_FS_ENET=y
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_E1000E=y
+CONFIG_PHYLIB=y
+CONFIG_AT803X_PHY=y
 CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_CICADA_PHY=y
@@ -96,12 +110,15 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-CONFIG_SERIAL_QE=m
+CONFIG_HW_RANDOM=y
 CONFIG_NVRAM=y
 CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_CPM=m
 CONFIG_I2C_MPC=y
 CONFIG_GPIO_MPC8XXX=y
@@ -121,6 +138,7 @@ CONFIG_USB_STORAGE=y
 CONFIG_EDAC=y
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_CMOS=y
 CONFIG_DMADEVICES=y
 CONFIG_FSL_DMA=y
@@ -161,6 +179,7 @@ CONFIG_DEBUG_FS=y
 CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
+CONFIG_STRICT_DEVMEM=y
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig
index 60027c2..3dfab4c 100644
--- a/arch/powerpc/configs/corenet32_smp_defconfig
+++ b/arch/powerpc/configs/corenet32_smp_defconfig
@@ -70,6 +70,7 @@ CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig
index 6c8b020..fa94fb3 100644
--- a/arch/powerpc/configs/corenet64_smp_defconfig
+++ b/arch/powerpc/configs/corenet64_smp_defconfig
@@ -27,6 +27,8 @@ CONFIG_P5040_DS=y
 CONFIG_T4240_QDS=y
 # CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
 CONFIG_BINFMT_MISC=m
+CONFIG_MATH_EMULATION=y
+CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED=y
 CONFIG_FSL_IFC=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCI_MSI=y
@@ -59,6 +61,7 @@ CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_OF_PARTS=y
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 09116c6..23fec79 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -42,6 +42,7 @@ CONFIG_INET_ESP=y
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
 CONFIG_MTD_CHAR=y
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 5a58882..dc098d9 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -27,6 +27,7 @@ CONFIG_MPC85xx_MDS=y
 CONFIG_MPC8536_DS=y
 CONFIG_MPC85xx_DS=y
 CONFIG_MPC85xx_RDB=y
+CONFIG_C293_PCIE=y
 CONFIG_P1010_RDB=y
 CONFIG_P1022_DS=y
 CONFIG_P1022_RDK=y
@@ -78,6 +79,7 @@ CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_OF_PARTS=y
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index 152fa05..5bca601 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -30,6 +30,7 @@ CONFIG_MPC85xx_MDS=y
 CONFIG_MPC8536_DS=y
 CONFIG_MPC85xx_DS=y
 CONFIG_MPC85xx_RDB=y
+CONFIG_C293_PCIE=y
 CONFIG_P1010_RDB=y
 CONFIG_P1022_DS=y
 CONFIG_P1022_RDK=y
@@ -81,6 +82,7 @@ CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_OF_PARTS=y
diff --git a/arch/powerpc/include/asm/Kbuild b/arch/powerpc/include/asm/Kbuild
index 650757c..704e6f1 100644
--- a/arch/powerpc/include/asm/Kbuild
+++ b/arch/powerpc/include/asm/Kbuild
@@ -2,3 +2,4 @@
 generic-y += clkdev.h
 generic-y += rwsem.h
 generic-y += trace_clock.h
+generic-y += vtime.h
\ No newline at end of file
diff --git a/arch/powerpc/include/asm/asm-compat.h b/arch/powerpc/include/asm/asm-compat.h
index 6e82f5f..4b237aa 100644
--- a/arch/powerpc/include/asm/asm-compat.h
+++ b/arch/powerpc/include/asm/asm-compat.h
@@ -32,6 +32,15 @@
 #define PPC_MTOCRF(FXM, RS) MTOCRF((FXM), RS)
 #define PPC_LR_STKOFF	16
 #define PPC_MIN_STKFRM	112
+
+#ifdef __BIG_ENDIAN__
+#define LDX_BE	stringify_in_c(ldx)
+#define STDX_BE	stringify_in_c(stdx)
+#else
+#define LDX_BE	stringify_in_c(ldbrx)
+#define STDX_BE	stringify_in_c(stdbrx)
+#endif
+
 #else /* 32-bit */
 
 /* operations for longs and pointers */
diff --git a/arch/powerpc/include/asm/btext.h b/arch/powerpc/include/asm/btext.h
index 906f46e..89fc382 100644
--- a/arch/powerpc/include/asm/btext.h
+++ b/arch/powerpc/include/asm/btext.h
@@ -13,6 +13,7 @@ extern void btext_update_display(unsigned long phys, int width, int height,
 extern void btext_setup_display(int width, int height, int depth, int pitch,
 				unsigned long address);
 extern void btext_prepare_BAT(void);
+extern void btext_map(void);
 extern void btext_unmap(void);
 
 extern void btext_drawchar(char c);
diff --git a/arch/powerpc/include/asm/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h
index b843e35..5b93122 100644
--- a/arch/powerpc/include/asm/cacheflush.h
+++ b/arch/powerpc/include/asm/cacheflush.h
@@ -32,13 +32,7 @@ extern void flush_dcache_page(struct page *page);
 
 extern void __flush_disable_L1(void);
 
-extern void __flush_icache_range(unsigned long, unsigned long);
-static inline void flush_icache_range(unsigned long start, unsigned long stop)
-{
-	if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
-		__flush_icache_range(start, stop);
-}
-
+extern void flush_icache_range(unsigned long, unsigned long);
 extern void flush_icache_user_range(struct vm_area_struct *vma,
 				    struct page *page, unsigned long addr,
 				    int len);
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index 6f3887d..0d4939b 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -371,14 +371,19 @@ extern const char *powerpc_base_platform;
 #define CPU_FTRS_E500MC	(CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \
 	    CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \
 	    CPU_FTR_DBELL | CPU_FTR_DEBUG_LVL_EXC | CPU_FTR_EMB_HV)
+/*
+ * e5500/e6500 erratum A-006958 is a timebase bug that can use the
+ * same workaround as CPU_FTR_CELL_TB_BUG.
+ */
 #define CPU_FTRS_E5500	(CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \
 	    CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \
 	    CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
-	    CPU_FTR_DEBUG_LVL_EXC | CPU_FTR_EMB_HV)
+	    CPU_FTR_DEBUG_LVL_EXC | CPU_FTR_EMB_HV | CPU_FTR_CELL_TB_BUG)
 #define CPU_FTRS_E6500	(CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \
 	    CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \
 	    CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
-	    CPU_FTR_DEBUG_LVL_EXC | CPU_FTR_EMB_HV | CPU_FTR_ALTIVEC_COMP)
+	    CPU_FTR_DEBUG_LVL_EXC | CPU_FTR_EMB_HV | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_CELL_TB_BUG)
 #define CPU_FTRS_GENERIC_32	(CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
 
 /* 64-bit CPUs */
diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index 77e97dd..38faede 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -28,6 +28,9 @@ struct dev_archdata {
 		void		*iommu_table_base;
 	} dma_data;
 
+#ifdef CONFIG_IOMMU_API
+	void			*iommu_domain;
+#endif
 #ifdef CONFIG_SWIOTLB
 	dma_addr_t		max_direct_dma_addr;
 #endif
diff --git a/arch/powerpc/include/asm/emulated_ops.h b/arch/powerpc/include/asm/emulated_ops.h
index 63f2a22..5a8b82a 100644
--- a/arch/powerpc/include/asm/emulated_ops.h
+++ b/arch/powerpc/include/asm/emulated_ops.h
@@ -46,8 +46,6 @@ extern struct ppc_emulated {
 	struct ppc_emulated_entry unaligned;
 #ifdef CONFIG_MATH_EMULATION
 	struct ppc_emulated_entry math;
-#elif defined(CONFIG_8XX_MINIMAL_FPEMU)
-	struct ppc_emulated_entry 8xx;
 #endif
 #ifdef CONFIG_VSX
 	struct ppc_emulated_entry vsx;
diff --git a/arch/powerpc/include/asm/epapr_hcalls.h b/arch/powerpc/include/asm/epapr_hcalls.h
index d3d6342..86b0ac7 100644
--- a/arch/powerpc/include/asm/epapr_hcalls.h
+++ b/arch/powerpc/include/asm/epapr_hcalls.h
@@ -105,6 +105,12 @@
 extern bool epapr_paravirt_enabled;
 extern u32 epapr_hypercall_start[];
 
+#ifdef CONFIG_EPAPR_PARAVIRT
+int __init epapr_paravirt_early_init(void);
+#else
+static inline int epapr_paravirt_early_init(void) { return 0; }
+#endif
+
 /*
  * We use "uintptr_t" to define a register because it's guaranteed to be a
  * 32-bit integer on a 32-bit platform, and a 64-bit integer on a 64-bit
diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index 07ca627..cca12f0 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -48,17 +48,18 @@
 #define EX_LR		72
 #define EX_CFAR		80
 #define EX_PPR		88	/* SMT thread status register (priority) */
+#define EX_CTR		96
 
 #ifdef CONFIG_RELOCATABLE
 #define __EXCEPTION_RELON_PROLOG_PSERIES_1(label, h)			\
 	ld	r12,PACAKBASE(r13);	/* get high part of &label */	\
 	mfspr	r11,SPRN_##h##SRR0;	/* save SRR0 */			\
 	LOAD_HANDLER(r12,label);					\
-	mtlr	r12;							\
+	mtctr	r12;							\
 	mfspr	r12,SPRN_##h##SRR1;	/* and SRR1 */			\
 	li	r10,MSR_RI;						\
 	mtmsrd 	r10,1;			/* Set RI (EE=0) */		\
-	blr;
+	bctr;
 #else
 /* If not relocatable, we can jump directly -- and save messing with LR */
 #define __EXCEPTION_RELON_PROLOG_PSERIES_1(label, h)			\
@@ -97,18 +98,18 @@
 
 #if defined(CONFIG_RELOCATABLE)
 /*
- * If we support interrupts with relocation on AND we're a relocatable
- * kernel, we need to use LR to get to the 2nd level handler.  So, save/restore
- * it when required.
+ * If we support interrupts with relocation on AND we're a relocatable kernel,
+ * we need to use CTR to get to the 2nd level handler.  So, save/restore it
+ * when required.
  */
-#define SAVE_LR(reg, area)	mflr	reg ; 	std	reg,area+EX_LR(r13)
-#define GET_LR(reg, area) 			ld	reg,area+EX_LR(r13)
-#define RESTORE_LR(reg, area)	ld	reg,area+EX_LR(r13) ; mtlr reg
+#define SAVE_CTR(reg, area)	mfctr	reg ; 	std	reg,area+EX_CTR(r13)
+#define GET_CTR(reg, area) 			ld	reg,area+EX_CTR(r13)
+#define RESTORE_CTR(reg, area)	ld	reg,area+EX_CTR(r13) ; mtctr reg
 #else
-/* ...else LR is unused and in register. */
-#define SAVE_LR(reg, area)
-#define GET_LR(reg, area) 	mflr	reg
-#define RESTORE_LR(reg, area)
+/* ...else CTR is unused and in register. */
+#define SAVE_CTR(reg, area)
+#define GET_CTR(reg, area) 	mfctr	reg
+#define RESTORE_CTR(reg, area)
 #endif
 
 /*
@@ -164,7 +165,7 @@ END_FTR_SECTION_NESTED(ftr,ftr,943)
 #define __EXCEPTION_PROLOG_1(area, extra, vec)				\
 	OPT_SAVE_REG_TO_PACA(area+EX_PPR, r9, CPU_FTR_HAS_PPR);		\
 	OPT_SAVE_REG_TO_PACA(area+EX_CFAR, r10, CPU_FTR_CFAR);		\
-	SAVE_LR(r10, area);						\
+	SAVE_CTR(r10, area);						\
 	mfcr	r9;							\
 	extra(vec);							\
 	std	r11,area+EX_R11(r13);					\
@@ -270,7 +271,7 @@ do_kvm_##n:								\
 	sth	r1,PACA_TRAP_SAVE(r13);					   \
 	std	r3,area+EX_R3(r13);					   \
 	addi	r3,r13,area;		/* r3 -> where regs are saved*/	   \
-	RESTORE_LR(r1, area);						   \
+	RESTORE_CTR(r1, area);						   \
 	b	bad_stack;						   \
 3:	std	r9,_CCR(r1);		/* save CR in stackframe	*/ \
 	std	r11,_NIP(r1);		/* save SRR0 in stackframe	*/ \
@@ -298,10 +299,10 @@ do_kvm_##n:								\
 	ld	r10,area+EX_CFAR(r13);					   \
 	std	r10,ORIG_GPR3(r1);					   \
 	END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66);		   \
-	GET_LR(r9,area);		/* Get LR, later save to stack	*/ \
+	mflr	r9;			/* Get LR, later save to stack	*/ \
 	ld	r2,PACATOC(r13);	/* get kernel TOC into r2	*/ \
 	std	r9,_LINK(r1);						   \
-	mfctr	r10;			/* save CTR in stackframe	*/ \
+	GET_CTR(r10, area);						   \
 	std	r10,_CTR(r1);						   \
 	lbz	r10,PACASOFTIRQEN(r13);				   \
 	mfspr	r11,SPRN_XER;		/* save XER in stackframe	*/ \
@@ -479,7 +480,7 @@ label##_relon_hv:							\
  */
 
 /* Exception addition: Hard disable interrupts */
-#define DISABLE_INTS	SOFT_DISABLE_INTS(r10,r11)
+#define DISABLE_INTS	RECONCILE_IRQ_STATE(r10,r11)
 
 #define ADD_NVGPRS				\
 	bl	.save_nvgprs
diff --git a/arch/powerpc/include/asm/fsl_pamu_stash.h b/arch/powerpc/include/asm/fsl_pamu_stash.h
new file mode 100644
index 0000000..caa1b21
--- /dev/null
+++ b/arch/powerpc/include/asm/fsl_pamu_stash.h
@@ -0,0 +1,39 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ */
+
+#ifndef __FSL_PAMU_STASH_H
+#define __FSL_PAMU_STASH_H
+
+/* cache stash targets */
+enum pamu_stash_target {
+	PAMU_ATTR_CACHE_L1 = 1,
+	PAMU_ATTR_CACHE_L2,
+	PAMU_ATTR_CACHE_L3,
+};
+
+/*
+ * This attribute allows configuring stashig specific parameters
+ * in the PAMU hardware.
+ */
+
+struct pamu_stash_attribute {
+	u32 	cpu;	/* cpu number */
+	u32 	cache;	/* cache to stash to: L1,L2,L3 */
+};
+
+#endif  /* __FSL_PAMU_STASH_H */
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
index dd15e5e..5a64757 100644
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -69,8 +69,18 @@ extern unsigned long pci_dram_offset;
 
 extern resource_size_t isa_mem_base;
 
-#if defined(CONFIG_PPC32) && defined(CONFIG_PPC_INDIRECT_IO)
-#error CONFIG_PPC_INDIRECT_IO is not yet supported on 32 bits
+/* Boolean set by platform if PIO accesses are suppored while _IO_BASE
+ * is not set or addresses cannot be translated to MMIO. This is typically
+ * set when the platform supports "special" PIO accesses via a non memory
+ * mapped mechanism, and allows things like the early udbg UART code to
+ * function.
+ */
+extern bool isa_io_special;
+
+#ifdef CONFIG_PPC32
+#if defined(CONFIG_PPC_INDIRECT_PIO) || defined(CONFIG_PPC_INDIRECT_MMIO)
+#error CONFIG_PPC_INDIRECT_{PIO,MMIO} are not yet supported on 32 bits
+#endif
 #endif
 
 /*
@@ -222,9 +232,9 @@ extern void _memcpy_toio(volatile void __iomem *dest, const void *src,
  * for PowerPC is as close as possible to the x86 version of these, and thus
  * provides fairly heavy weight barriers for the non-raw versions
  *
- * In addition, they support a hook mechanism when CONFIG_PPC_INDIRECT_IO
- * allowing the platform to provide its own implementation of some or all
- * of the accessors.
+ * In addition, they support a hook mechanism when CONFIG_PPC_INDIRECT_MMIO
+ * or CONFIG_PPC_INDIRECT_PIO are set allowing the platform to provide its
+ * own implementation of some or all of the accessors.
  */
 
 /*
@@ -240,8 +250,8 @@ extern void _memcpy_toio(volatile void __iomem *dest, const void *src,
 
 /* Indirect IO address tokens:
  *
- * When CONFIG_PPC_INDIRECT_IO is set, the platform can provide hooks
- * on all IOs. (Note that this is all 64 bits only for now)
+ * When CONFIG_PPC_INDIRECT_MMIO is set, the platform can provide hooks
+ * on all MMIOs. (Note that this is all 64 bits only for now)
  *
  * To help platforms who may need to differenciate MMIO addresses in
  * their hooks, a bitfield is reserved for use by the platform near the
@@ -263,11 +273,14 @@ extern void _memcpy_toio(volatile void __iomem *dest, const void *src,
  *
  * The direct IO mapping operations will then mask off those bits
  * before doing the actual access, though that only happen when
- * CONFIG_PPC_INDIRECT_IO is set, thus be careful when you use that
+ * CONFIG_PPC_INDIRECT_MMIO is set, thus be careful when you use that
  * mechanism
+ *
+ * For PIO, there is a separate CONFIG_PPC_INDIRECT_PIO which makes
+ * all PIO functions call through a hook.
  */
 
-#ifdef CONFIG_PPC_INDIRECT_IO
+#ifdef CONFIG_PPC_INDIRECT_MMIO
 #define PCI_IO_IND_TOKEN_MASK	0x0fff000000000000ul
 #define PCI_IO_IND_TOKEN_SHIFT	48
 #define PCI_FIX_ADDR(addr)						\
@@ -672,7 +685,7 @@ extern void __iomem * __ioremap_at(phys_addr_t pa, void *ea,
 extern void __iounmap_at(void *ea, unsigned long size);
 
 /*
- * When CONFIG_PPC_INDIRECT_IO is set, we use the generic iomap implementation
+ * When CONFIG_PPC_INDIRECT_PIO is set, we use the generic iomap implementation
  * which needs some additional definitions here. They basically allow PIO
  * space overall to be 1GB. This will work as long as we never try to use
  * iomap to map MMIO below 1GB which should be fine on ppc64
diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
index 0e40843..41f13ce 100644
--- a/arch/powerpc/include/asm/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -69,9 +69,9 @@ extern struct thread_info *softirq_ctx[NR_CPUS];
 
 extern void irq_ctx_init(void);
 extern void call_do_softirq(struct thread_info *tp);
-extern int call_handle_irq(int irq, void *p1,
-			   struct thread_info *tp, void *func);
+extern void call_do_irq(struct pt_regs *regs, struct thread_info *tp);
 extern void do_IRQ(struct pt_regs *regs);
+extern void __do_irq(struct pt_regs *regs);
 
 int irq_choose_cpu(const struct cpumask *mask);
 
diff --git a/arch/powerpc/include/asm/irqflags.h b/arch/powerpc/include/asm/irqflags.h
index 6f9b6e2..f51a558 100644
--- a/arch/powerpc/include/asm/irqflags.h
+++ b/arch/powerpc/include/asm/irqflags.h
@@ -40,9 +40,10 @@
 #define TRACE_DISABLE_INTS	TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_off)
 
 /*
- * This is used by assembly code to soft-disable interrupts
+ * This is used by assembly code to soft-disable interrupts first and
+ * reconcile irq state.
  */
-#define SOFT_DISABLE_INTS(__rA, __rB)		\
+#define RECONCILE_IRQ_STATE(__rA, __rB)		\
 	lbz	__rA,PACASOFTIRQEN(r13);	\
 	lbz	__rB,PACAIRQHAPPENED(r13);	\
 	cmpwi	cr0,__rA,0;			\
@@ -58,7 +59,7 @@
 #define TRACE_ENABLE_INTS
 #define TRACE_DISABLE_INTS
 
-#define SOFT_DISABLE_INTS(__rA, __rB)		\
+#define RECONCILE_IRQ_STATE(__rA, __rB)		\
 	lbz	__rA,PACAIRQHAPPENED(r13);	\
 	li	__rB,0;				\
 	ori	__rA,__rA,PACA_IRQ_HARD_DIS;	\
diff --git a/arch/powerpc/include/asm/jump_label.h b/arch/powerpc/include/asm/jump_label.h
index ae098c4..f016bb6 100644
--- a/arch/powerpc/include/asm/jump_label.h
+++ b/arch/powerpc/include/asm/jump_label.h
@@ -19,7 +19,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key *key)
 {
-	asm goto("1:\n\t"
+	asm_volatile_goto("1:\n\t"
 		 "nop\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 JUMP_ENTRY_TYPE "1b, %l[l_yes], %c0\n\t"
diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index 08891d0..fa19e2f 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -334,6 +334,27 @@ static inline u32 kvmppc_get_last_inst(struct kvm_vcpu *vcpu)
 	return r;
 }
 
+/*
+ * Like kvmppc_get_last_inst(), but for fetching a sc instruction.
+ * Because the sc instruction sets SRR0 to point to the following
+ * instruction, we have to fetch from pc - 4.
+ */
+static inline u32 kvmppc_get_last_sc(struct kvm_vcpu *vcpu)
+{
+	ulong pc = kvmppc_get_pc(vcpu) - 4;
+	struct kvmppc_book3s_shadow_vcpu *svcpu = svcpu_get(vcpu);
+	u32 r;
+
+	/* Load the instruction manually if it failed to do so in the
+	 * exit path */
+	if (svcpu->last_inst == KVM_INST_FETCH_FAILED)
+		kvmppc_ld(vcpu, &pc, sizeof(u32), &svcpu->last_inst, false);
+
+	r = svcpu->last_inst;
+	svcpu_put(svcpu);
+	return r;
+}
+
 static inline ulong kvmppc_get_fault_dar(struct kvm_vcpu *vcpu)
 {
 	struct kvmppc_book3s_shadow_vcpu *svcpu = svcpu_get(vcpu);
@@ -446,6 +467,23 @@ static inline u32 kvmppc_get_last_inst(struct kvm_vcpu *vcpu)
 	return vcpu->arch.last_inst;
 }
 
+/*
+ * Like kvmppc_get_last_inst(), but for fetching a sc instruction.
+ * Because the sc instruction sets SRR0 to point to the following
+ * instruction, we have to fetch from pc - 4.
+ */
+static inline u32 kvmppc_get_last_sc(struct kvm_vcpu *vcpu)
+{
+	ulong pc = kvmppc_get_pc(vcpu) - 4;
+
+	/* Load the instruction manually if it failed to do so in the
+	 * exit path */
+	if (vcpu->arch.last_inst == KVM_INST_FETCH_FAILED)
+		kvmppc_ld(vcpu, &pc, sizeof(u32), &vcpu->arch.last_inst, false);
+
+	return vcpu->arch.last_inst;
+}
+
 static inline ulong kvmppc_get_fault_dar(struct kvm_vcpu *vcpu)
 {
 	return vcpu->arch.fault_dar;
diff --git a/arch/powerpc/include/asm/kvm_book3s_64.h b/arch/powerpc/include/asm/kvm_book3s_64.h
index a1ecb14..86d638a 100644
--- a/arch/powerpc/include/asm/kvm_book3s_64.h
+++ b/arch/powerpc/include/asm/kvm_book3s_64.h
@@ -37,7 +37,7 @@ static inline void svcpu_put(struct kvmppc_book3s_shadow_vcpu *svcpu)
 
 #ifdef CONFIG_KVM_BOOK3S_64_HV
 #define KVM_DEFAULT_HPT_ORDER	24	/* 16MB HPT by default */
-extern int kvm_hpt_order;		/* order of preallocated HPTs */
+extern unsigned long kvm_rma_pages;
 #endif
 
 #define VRMA_VSID	0x1ffffffUL	/* 1TB VSID reserved for VRMA */
@@ -100,7 +100,7 @@ static inline unsigned long compute_tlbie_rb(unsigned long v, unsigned long r,
 			/* (masks depend on page size) */
 			rb |= 0x1000;		/* page encoding in LP field */
 			rb |= (va_low & 0x7f) << 16; /* 7b of VA in AVA/LP field */
-			rb |= (va_low & 0xfe);	/* AVAL field (P7 doesn't seem to care) */
+			rb |= ((va_low << 4) & 0xf0);	/* AVAL field (P7 doesn't seem to care) */
 		}
 	} else {
 		/* 4kB page */
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index af326cd..3328353 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -183,13 +183,9 @@ struct kvmppc_spapr_tce_table {
 	struct page *pages[0];
 };
 
-struct kvmppc_linear_info {
-	void		*base_virt;
-	unsigned long	 base_pfn;
-	unsigned long	 npages;
-	struct list_head list;
-	atomic_t	 use_count;
-	int		 type;
+struct kvm_rma_info {
+	atomic_t use_count;
+	unsigned long base_pfn;
 };
 
 /* XICS components, defined in book3s_xics.c */
@@ -246,7 +242,7 @@ struct kvm_arch {
 	int tlbie_lock;
 	unsigned long lpcr;
 	unsigned long rmor;
-	struct kvmppc_linear_info *rma;
+	struct kvm_rma_info *rma;
 	unsigned long vrma_slb_v;
 	int rma_setup_done;
 	int using_mmu_notifiers;
@@ -259,7 +255,7 @@ struct kvm_arch {
 	spinlock_t slot_phys_lock;
 	cpumask_t need_tlb_flush;
 	struct kvmppc_vcore *vcores[KVM_MAX_VCORES];
-	struct kvmppc_linear_info *hpt_li;
+	int hpt_cma_alloc;
 #endif /* CONFIG_KVM_BOOK3S_64_HV */
 #ifdef CONFIG_PPC_BOOK3S_64
 	struct list_head spapr_tce_tables;
diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index a5287fe..b15554a 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -137,10 +137,10 @@ extern long kvmppc_h_put_tce(struct kvm_vcpu *vcpu, unsigned long liobn,
 			     unsigned long ioba, unsigned long tce);
 extern long kvm_vm_ioctl_allocate_rma(struct kvm *kvm,
 				struct kvm_allocate_rma *rma);
-extern struct kvmppc_linear_info *kvm_alloc_rma(void);
-extern void kvm_release_rma(struct kvmppc_linear_info *ri);
-extern struct kvmppc_linear_info *kvm_alloc_hpt(void);
-extern void kvm_release_hpt(struct kvmppc_linear_info *li);
+extern struct kvm_rma_info *kvm_alloc_rma(void);
+extern void kvm_release_rma(struct kvm_rma_info *ri);
+extern struct page *kvm_alloc_hpt(unsigned long nr_pages);
+extern void kvm_release_hpt(struct page *page, unsigned long nr_pages);
 extern int kvmppc_core_init_vm(struct kvm *kvm);
 extern void kvmppc_core_destroy_vm(struct kvm *kvm);
 extern void kvmppc_core_free_memslot(struct kvm_memory_slot *free,
@@ -261,6 +261,7 @@ void kvmppc_set_pid(struct kvm_vcpu *vcpu, u32 pid);
 struct openpic;
 
 #ifdef CONFIG_KVM_BOOK3S_64_HV
+extern void kvm_cma_reserve(void) __init;
 static inline void kvmppc_set_xics_phys(int cpu, unsigned long addr)
 {
 	paca[cpu].kvm_hstate.xics_phys = addr;
@@ -281,13 +282,12 @@ static inline void kvmppc_set_host_ipi(int cpu, u8 host_ipi)
 }
 
 extern void kvmppc_fast_vcpu_kick(struct kvm_vcpu *vcpu);
-extern void kvm_linear_init(void);
 
 #else
-static inline void kvmppc_set_xics_phys(int cpu, unsigned long addr)
+static inline void __init kvm_cma_reserve(void)
 {}
 
-static inline void kvm_linear_init(void)
+static inline void kvmppc_set_xics_phys(int cpu, unsigned long addr)
 {}
 
 static inline u32 kvmppc_get_xics_latch(void)
@@ -394,10 +394,15 @@ static inline void kvmppc_mmu_flush_icache(pfn_t pfn)
 	}
 }
 
-/* Please call after prepare_to_enter. This function puts the lazy ee state
-   back to normal mode, without actually enabling interrupts. */
-static inline void kvmppc_lazy_ee_enable(void)
+/*
+ * Please call after prepare_to_enter. This function puts the lazy ee and irq
+ * disabled tracking state back to normal mode, without actually enabling
+ * interrupts.
+ */
+static inline void kvmppc_fix_ee_before_entry(void)
 {
+	trace_hardirqs_on();
+
 #ifdef CONFIG_PPC64
 	/* Only need to enable IRQs by hard enabling them after this */
 	local_paca->irq_happened = 0;
diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h
index 9b12f88..4470d1e 100644
--- a/arch/powerpc/include/asm/lppaca.h
+++ b/arch/powerpc/include/asm/lppaca.h
@@ -48,15 +48,13 @@
 struct lppaca {
 	/* cacheline 1 contains read-only data */
 
-	u32	desc;			/* Eye catcher 0xD397D781 */
-	u16	size;			/* Size of this struct */
-	u16	reserved1;
-	u16	reserved2:14;
-	u8	shared_proc:1;		/* Shared processor indicator */
-	u8	secondary_thread:1;	/* Secondary thread indicator */
+	__be32	desc;			/* Eye catcher 0xD397D781 */
+	__be16	size;			/* Size of this struct */
+	u8	reserved1[3];
+	u8	__old_status;		/* Old status, including shared proc */
 	u8	reserved3[14];
-	volatile u32 dyn_hw_node_id;	/* Dynamic hardware node id */
-	volatile u32 dyn_hw_proc_id;	/* Dynamic hardware proc id */
+	volatile __be32 dyn_hw_node_id;	/* Dynamic hardware node id */
+	volatile __be32 dyn_hw_proc_id;	/* Dynamic hardware proc id */
 	u8	reserved4[56];
 	volatile u8 vphn_assoc_counts[8]; /* Virtual processor home node */
 					  /* associativity change counters */
@@ -73,9 +71,9 @@ struct lppaca {
 	u8	fpregs_in_use;
 	u8	pmcregs_in_use;
 	u8	reserved8[28];
-	u64	wait_state_cycles;	/* Wait cycles for this proc */
+	__be64	wait_state_cycles;	/* Wait cycles for this proc */
 	u8	reserved9[28];
-	u16	slb_count;		/* # of SLBs to maintain */
+	__be16	slb_count;		/* # of SLBs to maintain */
 	u8	idle;			/* Indicate OS is idle */
 	u8	vmxregs_in_use;
 
@@ -89,17 +87,17 @@ struct lppaca {
 	 * NOTE: This value will ALWAYS be zero for dedicated processors and
 	 * will NEVER be zero for shared processors (ie, initialized to a 1).
 	 */
-	volatile u32 yield_count;
-	volatile u32 dispersion_count;	/* dispatch changed physical cpu */
-	volatile u64 cmo_faults;	/* CMO page fault count */
-	volatile u64 cmo_fault_time;	/* CMO page fault time */
+	volatile __be32 yield_count;
+	volatile __be32 dispersion_count; /* dispatch changed physical cpu */
+	volatile __be64 cmo_faults;	/* CMO page fault count */
+	volatile __be64 cmo_fault_time;	/* CMO page fault time */
 	u8	reserved10[104];
 
 	/* cacheline 4-5 */
 
-	u32	page_ins;		/* CMO Hint - # page ins by OS */
+	__be32	page_ins;		/* CMO Hint - # page ins by OS */
 	u8	reserved11[148];
-	volatile u64 dtl_idx;		/* Dispatch Trace Log head index */
+	volatile __be64 dtl_idx;		/* Dispatch Trace Log head index */
 	u8	reserved12[96];
 } __attribute__((__aligned__(0x400)));
 
@@ -108,17 +106,29 @@ extern struct lppaca lppaca[];
 #define lppaca_of(cpu)	(*paca[cpu].lppaca_ptr)
 
 /*
+ * Old kernels used a reserved bit in the VPA to determine if it was running
+ * in shared processor mode. New kernels look for a non zero yield count
+ * but KVM still needs to set the bit to keep the old stuff happy.
+ */
+#define LPPACA_OLD_SHARED_PROC		2
+
+static inline bool lppaca_shared_proc(struct lppaca *l)
+{
+	return l->yield_count != 0;
+}
+
+/*
  * SLB shadow buffer structure as defined in the PAPR.  The save_area
  * contains adjacent ESID and VSID pairs for each shadowed SLB.  The
  * ESID is stored in the lower 64bits, then the VSID.
  */
 struct slb_shadow {
-	u32	persistent;		/* Number of persistent SLBs */
-	u32	buffer_length;		/* Total shadow buffer length */
-	u64	reserved;
+	__be32	persistent;		/* Number of persistent SLBs */
+	__be32	buffer_length;		/* Total shadow buffer length */
+	__be64	reserved;
 	struct	{
-		u64     esid;
-		u64	vsid;
+		__be64     esid;
+		__be64	vsid;
 	} save_area[SLB_NUM_BOLTED];
 } ____cacheline_aligned;
 
@@ -130,14 +140,14 @@ extern struct slb_shadow slb_shadow[];
 struct dtl_entry {
 	u8	dispatch_reason;
 	u8	preempt_reason;
-	u16	processor_id;
-	u32	enqueue_to_dispatch_time;
-	u32	ready_to_enqueue_time;
-	u32	waiting_to_ready_time;
-	u64	timebase;
-	u64	fault_addr;
-	u64	srr0;
-	u64	srr1;
+	__be16	processor_id;
+	__be32	enqueue_to_dispatch_time;
+	__be32	ready_to_enqueue_time;
+	__be32	waiting_to_ready_time;
+	__be64	timebase;
+	__be64	fault_addr;
+	__be64	srr0;
+	__be64	srr1;
 };
 
 #define DISPATCH_LOG_BYTES	4096	/* bytes per cpu */
diff --git a/arch/powerpc/include/asm/mpc5121.h b/arch/powerpc/include/asm/mpc5121.h
index 8ae133e..887d3d6 100644
--- a/arch/powerpc/include/asm/mpc5121.h
+++ b/arch/powerpc/include/asm/mpc5121.h
@@ -32,25 +32,11 @@ struct mpc512x_ccm {
 	u32	scfr2;	/* System Clock Frequency Register 2 */
 	u32	scfr2s;	/* System Clock Frequency Shadow Register 2 */
 	u32	bcr;	/* Bread Crumb Register */
-	u32	p0ccr;	/* PSC0 Clock Control Register */
-	u32	p1ccr;	/* PSC1 CCR */
-	u32	p2ccr;	/* PSC2 CCR */
-	u32	p3ccr;	/* PSC3 CCR */
-	u32	p4ccr;	/* PSC4 CCR */
-	u32	p5ccr;	/* PSC5 CCR */
-	u32	p6ccr;	/* PSC6 CCR */
-	u32	p7ccr;	/* PSC7 CCR */
-	u32	p8ccr;	/* PSC8 CCR */
-	u32	p9ccr;	/* PSC9 CCR */
-	u32	p10ccr;	/* PSC10 CCR */
-	u32	p11ccr;	/* PSC11 CCR */
+	u32	psc_ccr[12];	/* PSC Clock Control Registers */
 	u32	spccr;	/* SPDIF Clock Control Register */
 	u32	cccr;	/* CFM Clock Control Register */
 	u32	dccr;	/* DIU Clock Control Register */
-	u32	m1ccr;	/* MSCAN1 CCR */
-	u32	m2ccr;	/* MSCAN2 CCR */
-	u32	m3ccr;	/* MSCAN3 CCR */
-	u32	m4ccr;	/* MSCAN4 CCR */
+	u32	mscan_ccr[4];	/* MSCAN Clock Control Registers */
 	u8	res[0x98]; /* Reserved */
 };
 
diff --git a/arch/powerpc/include/asm/mpc85xx.h b/arch/powerpc/include/asm/mpc85xx.h
new file mode 100644
index 0000000..736d4ac
--- /dev/null
+++ b/arch/powerpc/include/asm/mpc85xx.h
@@ -0,0 +1,92 @@
+/*
+ * MPC85xx cpu type detection
+ *
+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_PPC_MPC85XX_H
+#define __ASM_PPC_MPC85XX_H
+
+#define SVR_REV(svr)	((svr) & 0xFF)		/* SOC design resision */
+#define SVR_MAJ(svr)	(((svr) >>  4) & 0xF)	/* Major revision field*/
+#define SVR_MIN(svr)	(((svr) >>  0) & 0xF)	/* Minor revision field*/
+
+/* Some parts define SVR[0:23] as the SOC version */
+#define SVR_SOC_VER(svr) (((svr) >> 8) & 0xFFF7FF)	/* SOC Version fields */
+
+#define SVR_8533	0x803400
+#define SVR_8535	0x803701
+#define SVR_8536	0x803700
+#define SVR_8540	0x803000
+#define SVR_8541	0x807200
+#define SVR_8543	0x803200
+#define SVR_8544	0x803401
+#define SVR_8545	0x803102
+#define SVR_8547	0x803101
+#define SVR_8548	0x803100
+#define SVR_8555	0x807100
+#define SVR_8560	0x807000
+#define SVR_8567	0x807501
+#define SVR_8568	0x807500
+#define SVR_8569	0x808000
+#define SVR_8572	0x80E000
+#define SVR_P1010	0x80F100
+#define SVR_P1011	0x80E500
+#define SVR_P1012	0x80E501
+#define SVR_P1013	0x80E700
+#define SVR_P1014	0x80F101
+#define SVR_P1017	0x80F700
+#define SVR_P1020	0x80E400
+#define SVR_P1021	0x80E401
+#define SVR_P1022	0x80E600
+#define SVR_P1023	0x80F600
+#define SVR_P1024	0x80E402
+#define SVR_P1025	0x80E403
+#define SVR_P2010	0x80E300
+#define SVR_P2020	0x80E200
+#define SVR_P2040	0x821000
+#define SVR_P2041	0x821001
+#define SVR_P3041	0x821103
+#define SVR_P4040	0x820100
+#define SVR_P4080	0x820000
+#define SVR_P5010	0x822100
+#define SVR_P5020	0x822000
+#define SVR_P5021	0X820500
+#define SVR_P5040	0x820400
+#define SVR_T4240	0x824000
+#define SVR_T4120	0x824001
+#define SVR_T4160	0x824100
+#define SVR_C291	0x850000
+#define SVR_C292	0x850020
+#define SVR_C293	0x850030
+#define SVR_B4860	0X868000
+#define SVR_G4860	0x868001
+#define SVR_G4060	0x868003
+#define SVR_B4440	0x868100
+#define SVR_G4440	0x868101
+#define SVR_B4420	0x868102
+#define SVR_B4220	0x868103
+#define SVR_T1040	0x852000
+#define SVR_T1041	0x852001
+#define SVR_T1042	0x852002
+#define SVR_T1020	0x852100
+#define SVR_T1021	0x852101
+#define SVR_T1022	0x852102
+
+#define SVR_8610	0x80A000
+#define SVR_8641	0x809000
+#define SVR_8641D	0x809001
+
+#define SVR_9130	0x860001
+#define SVR_9131	0x860000
+#define SVR_9132	0x861000
+#define SVR_9232	0x861400
+
+#define SVR_Unknown	0xFFFFFF
+
+#endif
diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h
index 4a1ac9f..754f93d 100644
--- a/arch/powerpc/include/asm/mpic.h
+++ b/arch/powerpc/include/asm/mpic.h
@@ -396,7 +396,14 @@ extern struct bus_type mpic_subsys;
 #define	MPIC_REGSET_TSI108		MPIC_REGSET(1)	/* Tsi108/109 PIC */
 
 /* Get the version of primary MPIC */
+#ifdef CONFIG_MPIC
 extern u32 fsl_mpic_primary_get_version(void);
+#else
+static inline u32 fsl_mpic_primary_get_version(void)
+{
+	return 0;
+}
+#endif
 
 /* Allocate the controller structure and setup the linux irq descs
  * for the range if interrupts passed in. No HW initialization is
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 029fe85..c5cd728 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -124,6 +124,11 @@ extern int opal_enter_rtas(struct rtas_args *args,
 #define OPAL_PCI_POLL				62
 #define OPAL_PCI_MSI_EOI			63
 #define OPAL_PCI_GET_PHB_DIAG_DATA2		64
+#define OPAL_XSCOM_READ				65
+#define OPAL_XSCOM_WRITE			66
+#define OPAL_LPC_READ				67
+#define OPAL_LPC_WRITE				68
+#define OPAL_RETURN_CPU				69
 
 #ifndef __ASSEMBLY__
 
@@ -337,6 +342,17 @@ enum OpalEpowStatus {
 	OPAL_EPOW_OVER_INTERNAL_TEMP = 3
 };
 
+/*
+ * Address cycle types for LPC accesses. These also correspond
+ * to the content of the first cell of the "reg" property for
+ * device nodes on the LPC bus
+ */
+enum OpalLPCAddressType {
+	OPAL_LPC_MEM	= 0,
+	OPAL_LPC_IO	= 1,
+	OPAL_LPC_FW	= 2,
+};
+
 struct opal_machine_check_event {
 	enum OpalMCE_Version	version:8;	/* 0x00 */
 	uint8_t			in_use;		/* 0x01 */
@@ -631,6 +647,15 @@ int64_t opal_set_system_attention_led(uint8_t led_action);
 int64_t opal_pci_next_error(uint64_t phb_id, uint64_t *first_frozen_pe,
 			    uint16_t *pci_error_type, uint16_t *severity);
 int64_t opal_pci_poll(uint64_t phb_id);
+int64_t opal_return_cpu(void);
+
+int64_t opal_xscom_read(uint32_t gcid, uint32_t pcb_addr, uint64_t *val);
+int64_t opal_xscom_write(uint32_t gcid, uint32_t pcb_addr, uint64_t val);
+
+int64_t opal_lpc_write(uint32_t chip_id, enum OpalLPCAddressType addr_type,
+		       uint32_t addr, uint32_t data, uint32_t sz);
+int64_t opal_lpc_read(uint32_t chip_id, enum OpalLPCAddressType addr_type,
+		      uint32_t addr, uint32_t *data, uint32_t sz);
 
 /* Internal functions */
 extern int early_init_dt_scan_opal(unsigned long node, const char *uname, int depth, void *data);
@@ -664,6 +689,8 @@ extern int opal_machine_check(struct pt_regs *regs);
 
 extern void opal_shutdown(void);
 
+extern void opal_lpc_init(void);
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* __OPAL_H */
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index 77c91e7..a5954ce 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -68,8 +68,13 @@ struct paca_struct {
 	 * instruction.  They must travel together and be properly
 	 * aligned.
 	 */
+#ifdef __BIG_ENDIAN__
 	u16 lock_token;			/* Constant 0x8000, used in locks */
 	u16 paca_index;			/* Logical processor number */
+#else
+	u16 paca_index;			/* Logical processor number */
+	u16 lock_token;			/* Constant 0x8000, used in locks */
+#endif
 
 	u64 kernel_toc;			/* Kernel TOC address */
 	u64 kernelbase;			/* Base address of kernel */
@@ -93,9 +98,9 @@ struct paca_struct {
 	 * Now, starting in cacheline 2, the exception save areas
 	 */
 	/* used for most interrupts/exceptions */
-	u64 exgen[12] __attribute__((aligned(0x80)));
-	u64 exmc[12];		/* used for machine checks */
-	u64 exslb[12];		/* used for SLB/segment table misses
+	u64 exgen[13] __attribute__((aligned(0x80)));
+	u64 exmc[13];		/* used for machine checks */
+	u64 exslb[13];		/* used for SLB/segment table misses
  				 * on the linear mapping */
 	/* SLB related definitions */
 	u16 vmalloc_sllp;
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 32d0d20..4ca90a3 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -159,7 +159,7 @@ struct pci_dn {
 
 	int	pci_ext_config_space;	/* for pci devices */
 
-	int	force_32bit_msi:1;
+	bool	force_32bit_msi;
 
 	struct	pci_dev *pcidev;	/* back-pointer to the pci device */
 #ifdef CONFIG_EEH
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index 6653f27..95145a1 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -113,11 +113,6 @@ extern int pci_domain_nr(struct pci_bus *bus);
 /* Decide whether to display the domain number in /proc */
 extern int pci_proc_domain(struct pci_bus *bus);
 
-/* MSI arch hooks */
-#define arch_setup_msi_irqs arch_setup_msi_irqs
-#define arch_teardown_msi_irqs arch_teardown_msi_irqs
-#define arch_msi_check_device arch_msi_check_device
-
 struct vm_area_struct;
 /* Map a range of PCI memory or I/O space for a device into user space */
 int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
diff --git a/arch/powerpc/include/asm/perf_event_fsl_emb.h b/arch/powerpc/include/asm/perf_event_fsl_emb.h
index 718a9fa..a581654 100644
--- a/arch/powerpc/include/asm/perf_event_fsl_emb.h
+++ b/arch/powerpc/include/asm/perf_event_fsl_emb.h
@@ -13,7 +13,7 @@
 #include <linux/types.h>
 #include <asm/hw_irq.h>
 
-#define MAX_HWEVENTS 4
+#define MAX_HWEVENTS 6
 
 /* event flags */
 #define FSL_EMB_EVENT_VALID      1
diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h
index 8b24926..3fd2f1b6 100644
--- a/arch/powerpc/include/asm/perf_event_server.h
+++ b/arch/powerpc/include/asm/perf_event_server.h
@@ -138,11 +138,11 @@ extern ssize_t power_events_sysfs_show(struct device *dev,
 #define	EVENT_PTR(_id, _suffix)		&EVENT_VAR(_id, _suffix).attr.attr
 
 #define	EVENT_ATTR(_name, _id, _suffix)					\
-	PMU_EVENT_ATTR(_name, EVENT_VAR(_id, _suffix), PME_PM_##_id,	\
+	PMU_EVENT_ATTR(_name, EVENT_VAR(_id, _suffix), PME_##_id,	\
 			power_events_sysfs_show)
 
 #define	GENERIC_EVENT_ATTR(_name, _id)	EVENT_ATTR(_name, _id, _g)
 #define	GENERIC_EVENT_PTR(_id)		EVENT_PTR(_id, _g)
 
-#define	POWER_EVENT_ATTR(_name, _id)	EVENT_ATTR(PM_##_name, _id, _p)
+#define	POWER_EVENT_ATTR(_name, _id)	EVENT_ATTR(_name, _id, _p)
 #define	POWER_EVENT_PTR(_id)		EVENT_PTR(_id, _p)
diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/include/asm/plpar_wrappers.h
index f35787b..a63b045 100644
--- a/arch/powerpc/platforms/pseries/plpar_wrappers.h
+++ b/arch/powerpc/include/asm/plpar_wrappers.h
@@ -1,5 +1,5 @@
-#ifndef _PSERIES_PLPAR_WRAPPERS_H
-#define _PSERIES_PLPAR_WRAPPERS_H
+#ifndef _ASM_POWERPC_PLPAR_WRAPPERS_H
+#define _ASM_POWERPC_PLPAR_WRAPPERS_H
 
 #include <linux/string.h>
 #include <linux/irqflags.h>
@@ -256,30 +256,6 @@ static inline long plpar_tce_stuff(unsigned long liobn, unsigned long ioba,
 	return plpar_hcall_norets(H_STUFF_TCE, liobn, ioba, tceval, count);
 }
 
-static inline long plpar_get_term_char(unsigned long termno,
-		unsigned long *len_ret, char *buf_ret)
-{
-	long rc;
-	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
-	unsigned long *lbuf = (unsigned long *)buf_ret;	/* TODO: alignment? */
-
-	rc = plpar_hcall(H_GET_TERM_CHAR, retbuf, termno);
-
-	*len_ret = retbuf[0];
-	lbuf[0] = retbuf[1];
-	lbuf[1] = retbuf[2];
-
-	return rc;
-}
-
-static inline long plpar_put_term_char(unsigned long termno, unsigned long len,
-		const char *buffer)
-{
-	unsigned long *lbuf = (unsigned long *)buffer;	/* TODO: alignment? */
-	return plpar_hcall_norets(H_PUT_TERM_CHAR, termno, len, lbuf[0],
-			lbuf[1]);
-}
-
 /* Set various resource mode parameters */
 static inline long plpar_set_mode(unsigned long mflags, unsigned long resource,
 		unsigned long value1, unsigned long value2)
@@ -321,4 +297,4 @@ static inline long plapr_set_watchpoint0(unsigned long dawr0, unsigned long dawr
 	return plpar_set_mode(0, 2, dawr0, dawrx0);
 }
 
-#endif /* _PSERIES_PLPAR_WRAPPERS_H */
+#endif /* _ASM_POWERPC_PLPAR_WRAPPERS_H */
diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index eccfc16..d7fe9f5 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -81,6 +81,53 @@
 #define	__REGA0_R30	30
 #define	__REGA0_R31	31
 
+/* opcode and xopcode for instructions */
+#define OP_TRAP 3
+#define OP_TRAP_64 2
+
+#define OP_31_XOP_TRAP      4
+#define OP_31_XOP_LWZX      23
+#define OP_31_XOP_DCBST     54
+#define OP_31_XOP_LWZUX     55
+#define OP_31_XOP_TRAP_64   68
+#define OP_31_XOP_DCBF      86
+#define OP_31_XOP_LBZX      87
+#define OP_31_XOP_STWX      151
+#define OP_31_XOP_STBX      215
+#define OP_31_XOP_LBZUX     119
+#define OP_31_XOP_STBUX     247
+#define OP_31_XOP_LHZX      279
+#define OP_31_XOP_LHZUX     311
+#define OP_31_XOP_MFSPR     339
+#define OP_31_XOP_LHAX      343
+#define OP_31_XOP_LHAUX     375
+#define OP_31_XOP_STHX      407
+#define OP_31_XOP_STHUX     439
+#define OP_31_XOP_MTSPR     467
+#define OP_31_XOP_DCBI      470
+#define OP_31_XOP_LWBRX     534
+#define OP_31_XOP_TLBSYNC   566
+#define OP_31_XOP_STWBRX    662
+#define OP_31_XOP_LHBRX     790
+#define OP_31_XOP_STHBRX    918
+
+#define OP_LWZ  32
+#define OP_LD   58
+#define OP_LWZU 33
+#define OP_LBZ  34
+#define OP_LBZU 35
+#define OP_STW  36
+#define OP_STWU 37
+#define OP_STD  62
+#define OP_STB  38
+#define OP_STBU 39
+#define OP_LHZ  40
+#define OP_LHZU 41
+#define OP_LHA  42
+#define OP_LHAU 43
+#define OP_STH  44
+#define OP_STHU 45
+
 /* sorted alphabetically */
 #define PPC_INST_BHRBE			0x7c00025c
 #define PPC_INST_CLRBHRB		0x7c00035c
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 2f1b6c5..5995457 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -54,7 +54,8 @@ BEGIN_FW_FTR_SECTION;							\
 	/* from user - see if there are any DTL entries to process */	\
 	ld	r10,PACALPPACAPTR(r13);	/* get ptr to VPA */		\
 	ld	r11,PACA_DTL_RIDX(r13);	/* get log read index */	\
-	ld	r10,LPPACA_DTLIDX(r10);	/* get log write index */	\
+	addi	r10,r10,LPPACA_DTLIDX;					\
+	LDX_BE	r10,0,r10;		/* get log write index */	\
 	cmpd	cr1,r11,r10;						\
 	beq+	cr1,33f;						\
 	bl	.accumulate_stolen_time;				\
@@ -219,19 +220,6 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
 #define REST_8VSRS(n,b,base)	REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base)
 #define REST_16VSRS(n,b,base)	REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base)
 #define REST_32VSRS(n,b,base)	REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base)
-/* Save the upper 32 VSRs (32-63) in the thread VSX region (0-31) */
-#define SAVE_VSRU(n,b,base)	li b,THREAD_VR0+(16*(n));  STXVD2X(n+32,R##base,R##b)
-#define SAVE_2VSRSU(n,b,base)	SAVE_VSRU(n,b,base); SAVE_VSRU(n+1,b,base)
-#define SAVE_4VSRSU(n,b,base)	SAVE_2VSRSU(n,b,base); SAVE_2VSRSU(n+2,b,base)
-#define SAVE_8VSRSU(n,b,base)	SAVE_4VSRSU(n,b,base); SAVE_4VSRSU(n+4,b,base)
-#define SAVE_16VSRSU(n,b,base)	SAVE_8VSRSU(n,b,base); SAVE_8VSRSU(n+8,b,base)
-#define SAVE_32VSRSU(n,b,base)	SAVE_16VSRSU(n,b,base); SAVE_16VSRSU(n+16,b,base)
-#define REST_VSRU(n,b,base)	li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,R##base,R##b)
-#define REST_2VSRSU(n,b,base)	REST_VSRU(n,b,base); REST_VSRU(n+1,b,base)
-#define REST_4VSRSU(n,b,base)	REST_2VSRSU(n,b,base); REST_2VSRSU(n+2,b,base)
-#define REST_8VSRSU(n,b,base)	REST_4VSRSU(n,b,base); REST_4VSRSU(n+4,b,base)
-#define REST_16VSRSU(n,b,base)	REST_8VSRSU(n,b,base); REST_8VSRSU(n+8,b,base)
-#define REST_32VSRSU(n,b,base)	REST_16VSRSU(n,b,base); REST_16VSRSU(n+16,b,base)
 
 /*
  * b = base register for addressing, o = base offset from register of 1st EVR
@@ -443,15 +431,15 @@ END_FTR_SECTION_IFSET(CPU_FTR_601)
 #define ISYNC_601
 #endif
 
-#ifdef CONFIG_PPC_CELL
+#if defined(CONFIG_PPC_CELL) || defined(CONFIG_PPC_FSL_BOOK3E)
 #define MFTB(dest)			\
-90:	mftb  dest;			\
+90:	mfspr dest, SPRN_TBRL;		\
 BEGIN_FTR_SECTION_NESTED(96);		\
 	cmpwi dest,0;			\
 	beq-  90b;			\
 END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96)
 #else
-#define MFTB(dest)			mftb dest
+#define MFTB(dest)			mfspr dest, SPRN_TBRL
 #endif
 
 #ifndef CONFIG_SMP
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index e378ccc..ce4de5a 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -149,8 +149,6 @@ typedef struct {
 
 struct thread_struct {
 	unsigned long	ksp;		/* Kernel stack pointer */
-	unsigned long	ksp_limit;	/* if ksp <= ksp_limit stack overflow */
-
 #ifdef CONFIG_PPC64
 	unsigned long	ksp_vsid;
 #endif
@@ -162,6 +160,7 @@ struct thread_struct {
 #endif
 #ifdef CONFIG_PPC32
 	void		*pgdir;		/* root of page-table tree */
+	unsigned long	ksp_limit;	/* if ksp <= ksp_limit stack overflow */
 #endif
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
 	/*
@@ -321,7 +320,6 @@ struct thread_struct {
 #else
 #define INIT_THREAD  { \
 	.ksp = INIT_SP, \
-	.ksp_limit = INIT_SP_LIMIT, \
 	.regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \
 	.fs = KERNEL_DS, \
 	.fpr = {{0}}, \
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index bc2da15..7d0c7f3 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -38,14 +38,12 @@ extern unsigned long pci_address_to_pio(phys_addr_t address);
 /* Parse the ibm,dma-window property of an OF node into the busno, phys and
  * size parameters.
  */
-void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
-		unsigned long *busno, unsigned long *phys, unsigned long *size);
+void of_parse_dma_window(struct device_node *dn, const __be32 *dma_window,
+			 unsigned long *busno, unsigned long *phys,
+			 unsigned long *size);
 
 extern void kdump_move_device_tree(void);
 
-/* CPU OF node matching */
-struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
-
 /* cache lookup */
 struct device_node *of_find_next_cache_node(struct device_node *np);
 
@@ -58,6 +56,8 @@ static inline int of_node_to_nid(struct device_node *device) { return 0; }
 
 extern void of_instantiate_rtc(void);
 
+extern int of_get_ibm_chip_id(struct device_node *np);
+
 /* The of_drconf_cell struct defines the layout of the LMB array
  * specified in the device tree property
  * ibm,dynamic-reconfiguration-memory/ibm,dynamic-memory
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 99222e2..10d1ef0 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -115,10 +115,10 @@
 #define MSR_64BIT	MSR_SF
 
 /* Server variant */
-#define MSR_		MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV
-#define MSR_KERNEL	MSR_ | MSR_64BIT
-#define MSR_USER32	MSR_ | MSR_PR | MSR_EE
-#define MSR_USER64	MSR_USER32 | MSR_64BIT
+#define MSR_		(MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV)
+#define MSR_KERNEL	(MSR_ | MSR_64BIT)
+#define MSR_USER32	(MSR_ | MSR_PR | MSR_EE)
+#define MSR_USER64	(MSR_USER32 | MSR_64BIT)
 #elif defined(CONFIG_PPC_BOOK3S_32) || defined(CONFIG_8xx)
 /* Default MSR for kernel mode. */
 #define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_IR|MSR_DR)
@@ -258,8 +258,8 @@
 #define FSCR_TAR_LG	8	/* Enable Target Address Register */
 #define FSCR_EBB_LG	7	/* Enable Event Based Branching */
 #define FSCR_TM_LG	5	/* Enable Transactional Memory */
-#define FSCR_PM_LG	4	/* Enable prob/priv access to PMU SPRs */
-#define FSCR_BHRB_LG	3	/* Enable Branch History Rolling Buffer*/
+#define FSCR_BHRB_LG	4	/* Enable Branch History Rolling Buffer*/
+#define FSCR_PM_LG	3	/* Enable prob/priv access to PMU SPRs */
 #define FSCR_DSCR_LG	2	/* Enable Data Stream Control Register */
 #define FSCR_VECVSX_LG	1	/* Enable VMX/VSX  */
 #define FSCR_FP_LG	0	/* Enable Floating Point */
@@ -1126,10 +1126,10 @@
 				     : "memory")
 
 #ifdef __powerpc64__
-#ifdef CONFIG_PPC_CELL
+#if defined(CONFIG_PPC_CELL) || defined(CONFIG_PPC_FSL_BOOK3E)
 #define mftb()		({unsigned long rval;				\
 			asm volatile(					\
-				"90:	mftb %0;\n"			\
+				"90:	mfspr %0, %2;\n"		\
 				"97:	cmpwi %0,0;\n"			\
 				"	beq- 90b;\n"			\
 				"99:\n"					\
@@ -1143,18 +1143,23 @@
 				"	.llong 0\n"			\
 				"	.llong 0\n"			\
 				".previous"				\
-			: "=r" (rval) : "i" (CPU_FTR_CELL_TB_BUG)); rval;})
+			: "=r" (rval) \
+			: "i" (CPU_FTR_CELL_TB_BUG), "i" (SPRN_TBRL)); \
+			rval;})
 #else
 #define mftb()		({unsigned long rval;	\
-			asm volatile("mftb %0" : "=r" (rval)); rval;})
+			asm volatile("mfspr %0, %1" : \
+				     "=r" (rval) : "i" (SPRN_TBRL)); rval;})
 #endif /* !CONFIG_PPC_CELL */
 
 #else /* __powerpc64__ */
 
 #define mftbl()		({unsigned long rval;	\
-			asm volatile("mftbl %0" : "=r" (rval)); rval;})
+			asm volatile("mfspr %0, %1" : "=r" (rval) : \
+				"i" (SPRN_TBRL)); rval;})
 #define mftbu()		({unsigned long rval;	\
-			asm volatile("mftbu %0" : "=r" (rval)); rval;})
+			asm volatile("mfspr %0, %1" : "=r" (rval) : \
+				"i" (SPRN_TBRU)); rval;})
 #endif /* !__powerpc64__ */
 
 #define mttbl(v)	asm volatile("mttbl %0":: "r"(v))
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index b417de3..ed8f836 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -29,10 +29,10 @@
 #if defined(CONFIG_PPC_BOOK3E_64)
 #define MSR_64BIT	MSR_CM
 
-#define MSR_		MSR_ME | MSR_CE
-#define MSR_KERNEL	MSR_ | MSR_64BIT
-#define MSR_USER32	MSR_ | MSR_PR | MSR_EE
-#define MSR_USER64	MSR_USER32 | MSR_64BIT
+#define MSR_		(MSR_ME | MSR_CE)
+#define MSR_KERNEL	(MSR_ | MSR_64BIT)
+#define MSR_USER32	(MSR_ | MSR_PR | MSR_EE)
+#define MSR_USER64	(MSR_USER32 | MSR_64BIT)
 #elif defined (CONFIG_40x)
 #define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)
 #define MSR_USER	(MSR_KERNEL|MSR_PR|MSR_EE)
diff --git a/arch/powerpc/include/asm/reg_fsl_emb.h b/arch/powerpc/include/asm/reg_fsl_emb.h
index 77bb71c..0e3ddf5 100644
--- a/arch/powerpc/include/asm/reg_fsl_emb.h
+++ b/arch/powerpc/include/asm/reg_fsl_emb.h
@@ -17,12 +17,16 @@
 /* Freescale Book E Performance Monitor APU Registers */
 #define PMRN_PMC0	0x010	/* Performance Monitor Counter 0 */
 #define PMRN_PMC1	0x011	/* Performance Monitor Counter 1 */
-#define PMRN_PMC2	0x012	/* Performance Monitor Counter 1 */
-#define PMRN_PMC3	0x013	/* Performance Monitor Counter 1 */
+#define PMRN_PMC2	0x012	/* Performance Monitor Counter 2 */
+#define PMRN_PMC3	0x013	/* Performance Monitor Counter 3 */
+#define PMRN_PMC4	0x014	/* Performance Monitor Counter 4 */
+#define PMRN_PMC5	0x015	/* Performance Monitor Counter 5 */
 #define PMRN_PMLCA0	0x090	/* PM Local Control A0 */
 #define PMRN_PMLCA1	0x091	/* PM Local Control A1 */
 #define PMRN_PMLCA2	0x092	/* PM Local Control A2 */
 #define PMRN_PMLCA3	0x093	/* PM Local Control A3 */
+#define PMRN_PMLCA4	0x094	/* PM Local Control A4 */
+#define PMRN_PMLCA5	0x095	/* PM Local Control A5 */
 
 #define PMLCA_FC	0x80000000	/* Freeze Counter */
 #define PMLCA_FCS	0x40000000	/* Freeze in Supervisor */
@@ -30,14 +34,18 @@
 #define PMLCA_FCM1	0x10000000	/* Freeze when PMM==1 */
 #define PMLCA_FCM0	0x08000000	/* Freeze when PMM==0 */
 #define PMLCA_CE	0x04000000	/* Condition Enable */
+#define PMLCA_FGCS1	0x00000002	/* Freeze in guest state */
+#define PMLCA_FGCS0	0x00000001	/* Freeze in hypervisor state */
 
-#define PMLCA_EVENT_MASK 0x00ff0000	/* Event field */
+#define PMLCA_EVENT_MASK 0x01ff0000	/* Event field */
 #define PMLCA_EVENT_SHIFT	16
 
 #define PMRN_PMLCB0	0x110	/* PM Local Control B0 */
 #define PMRN_PMLCB1	0x111	/* PM Local Control B1 */
 #define PMRN_PMLCB2	0x112	/* PM Local Control B2 */
 #define PMRN_PMLCB3	0x113	/* PM Local Control B3 */
+#define PMRN_PMLCB4	0x114	/* PM Local Control B4 */
+#define PMRN_PMLCB5	0x115	/* PM Local Control B5 */
 
 #define PMLCB_THRESHMUL_MASK	0x0700	/* Threshold Multiple Field */
 #define PMLCB_THRESHMUL_SHIFT	8
@@ -55,16 +63,22 @@
 
 #define PMRN_UPMC0	0x000	/* User Performance Monitor Counter 0 */
 #define PMRN_UPMC1	0x001	/* User Performance Monitor Counter 1 */
-#define PMRN_UPMC2	0x002	/* User Performance Monitor Counter 1 */
-#define PMRN_UPMC3	0x003	/* User Performance Monitor Counter 1 */
+#define PMRN_UPMC2	0x002	/* User Performance Monitor Counter 2 */
+#define PMRN_UPMC3	0x003	/* User Performance Monitor Counter 3 */
+#define PMRN_UPMC4	0x004	/* User Performance Monitor Counter 4 */
+#define PMRN_UPMC5	0x005	/* User Performance Monitor Counter 5 */
 #define PMRN_UPMLCA0	0x080	/* User PM Local Control A0 */
 #define PMRN_UPMLCA1	0x081	/* User PM Local Control A1 */
 #define PMRN_UPMLCA2	0x082	/* User PM Local Control A2 */
 #define PMRN_UPMLCA3	0x083	/* User PM Local Control A3 */
+#define PMRN_UPMLCA4	0x084	/* User PM Local Control A4 */
+#define PMRN_UPMLCA5	0x085	/* User PM Local Control A5 */
 #define PMRN_UPMLCB0	0x100	/* User PM Local Control B0 */
 #define PMRN_UPMLCB1	0x101	/* User PM Local Control B1 */
 #define PMRN_UPMLCB2	0x102	/* User PM Local Control B2 */
 #define PMRN_UPMLCB3	0x103	/* User PM Local Control B3 */
+#define PMRN_UPMLCB4	0x104	/* User PM Local Control B4 */
+#define PMRN_UPMLCB5	0x105	/* User PM Local Control B5 */
 #define PMRN_UPMGC0	0x180	/* User PM Global Control 0 */
 
 
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index c7a8bfc..9bd52c6 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -44,12 +44,12 @@
  *
  */
 
-typedef u32 rtas_arg_t;
+typedef __be32 rtas_arg_t;
 
 struct rtas_args {
-	u32 token;
-	u32 nargs;
-	u32 nret; 
+	__be32 token;
+	__be32 nargs;
+	__be32 nret; 
 	rtas_arg_t args[16];
 	rtas_arg_t *rets;     /* Pointer to return values in args[]. */
 };  
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index 48cfc85..98da78e 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -112,6 +112,7 @@ static inline struct cpumask *cpu_core_mask(int cpu)
 }
 
 extern int cpu_to_core_id(int cpu);
+extern int cpu_to_chip_id(int cpu);
 
 /* Since OpenPIC has only 4 IPIs, we use slightly different message numbers.
  *
@@ -186,6 +187,8 @@ extern int smt_enabled_at_boot;
 extern int smp_mpic_probe(void);
 extern void smp_mpic_setup_cpu(int cpu);
 extern int smp_generic_kick_cpu(int nr);
+extern int smp_generic_cpu_bootable(unsigned int nr);
+
 
 extern void smp_generic_give_timebase(void);
 extern void smp_generic_take_timebase(void);
diff --git a/arch/powerpc/include/asm/spinlock.h b/arch/powerpc/include/asm/spinlock.h
index 5b23f91..5f54a74 100644
--- a/arch/powerpc/include/asm/spinlock.h
+++ b/arch/powerpc/include/asm/spinlock.h
@@ -32,8 +32,12 @@
 
 #ifdef CONFIG_PPC64
 /* use 0x800000yy when locked, where yy == CPU number */
+#ifdef __BIG_ENDIAN__
 #define LOCK_TOKEN	(*(u32 *)(&get_paca()->lock_token))
 #else
+#define LOCK_TOKEN	(*(u32 *)(&get_paca()->paca_index))
+#endif
+#else
 #define LOCK_TOKEN	1
 #endif
 
@@ -96,7 +100,7 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock)
 
 #if defined(CONFIG_PPC_SPLPAR)
 /* We only yield to the hypervisor if we are in shared processor mode */
-#define SHARED_PROCESSOR (local_paca->lppaca_ptr->shared_proc)
+#define SHARED_PROCESSOR (lppaca_shared_proc(local_paca->lppaca_ptr))
 extern void __spin_yield(arch_spinlock_t *lock);
 extern void __rw_yield(arch_rwlock_t *lock);
 #else /* SPLPAR */
diff --git a/arch/powerpc/include/asm/switch_to.h b/arch/powerpc/include/asm/switch_to.h
index 294c2ce..2be5618 100644
--- a/arch/powerpc/include/asm/switch_to.h
+++ b/arch/powerpc/include/asm/switch_to.h
@@ -25,11 +25,8 @@ static inline void save_tar(struct thread_struct *prev)
 static inline void save_tar(struct thread_struct *prev) {}
 #endif
 
-extern void giveup_fpu(struct task_struct *);
 extern void load_up_fpu(void);
-extern void disable_kernel_fp(void);
 extern void enable_kernel_fp(void);
-extern void flush_fp_to_thread(struct task_struct *);
 extern void enable_kernel_altivec(void);
 extern void load_up_altivec(struct task_struct *);
 extern int emulate_altivec(struct pt_regs *);
@@ -47,6 +44,14 @@ static inline void discard_lazy_cpu_state(void)
 }
 #endif
 
+#ifdef CONFIG_PPC_FPU
+extern void flush_fp_to_thread(struct task_struct *);
+extern void giveup_fpu(struct task_struct *);
+#else
+static inline void flush_fp_to_thread(struct task_struct *t) { }
+static inline void giveup_fpu(struct task_struct *t) { }
+#endif
+
 #ifdef CONFIG_ALTIVEC
 extern void flush_altivec_to_thread(struct task_struct *);
 extern void giveup_altivec(struct task_struct *);
diff --git a/arch/powerpc/include/asm/timex.h b/arch/powerpc/include/asm/timex.h
index c55e14f..18908ca 100644
--- a/arch/powerpc/include/asm/timex.h
+++ b/arch/powerpc/include/asm/timex.h
@@ -29,7 +29,7 @@ static inline cycles_t get_cycles(void)
 	ret = 0;
 
 	__asm__ __volatile__(
-		"97:	mftb %0\n"
+		"97:	mfspr %0, %2\n"
 		"99:\n"
 		".section __ftr_fixup,\"a\"\n"
 		".align 2\n"
@@ -41,7 +41,7 @@ static inline cycles_t get_cycles(void)
 		"	.long 0\n"
 		"	.long 0\n"
 		".previous"
-		: "=r" (ret) : "i" (CPU_FTR_601));
+		: "=r" (ret) : "i" (CPU_FTR_601), "i" (SPRN_TBRL));
 	return ret;
 #endif
 }
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index 161ab66..89e3ef2 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -96,6 +96,7 @@ static inline int prrn_is_enabled(void)
 #ifdef CONFIG_PPC64
 #include <asm/smp.h>
 
+#define topology_physical_package_id(cpu)	(cpu_to_chip_id(cpu))
 #define topology_thread_cpumask(cpu)	(per_cpu(cpu_sibling_map, cpu))
 #define topology_core_cpumask(cpu)	(per_cpu(cpu_core_map, cpu))
 #define topology_core_id(cpu)		(cpu_to_core_id(cpu))
diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h
index dc59091..b51fba1 100644
--- a/arch/powerpc/include/asm/udbg.h
+++ b/arch/powerpc/include/asm/udbg.h
@@ -27,10 +27,11 @@ extern void udbg_printf(const char *fmt, ...)
 	__attribute__ ((format (printf, 1, 2)));
 extern void udbg_progress(char *s, unsigned short hex);
 
-extern void udbg_init_uart(void __iomem *comport, unsigned int speed,
-			   unsigned int clock);
-extern unsigned int udbg_probe_uart_speed(void __iomem *comport,
-					  unsigned int clock);
+extern void udbg_uart_init_mmio(void __iomem *addr, unsigned int stride);
+extern void udbg_uart_init_pio(unsigned long port, unsigned int stride);
+
+extern void udbg_uart_setup(unsigned int speed, unsigned int clock);
+extern unsigned int udbg_probe_uart_speed(unsigned int clock);
 
 struct device_node;
 extern void udbg_scc_init(int force_scc);
diff --git a/arch/powerpc/include/uapi/asm/elf.h b/arch/powerpc/include/uapi/asm/elf.h
index 05b8d56..7e39c91 100644
--- a/arch/powerpc/include/uapi/asm/elf.h
+++ b/arch/powerpc/include/uapi/asm/elf.h
@@ -107,26 +107,25 @@ typedef elf_gregset_t32 compat_elf_gregset_t;
 # define ELF_NVRREG	34	/* includes vscr & vrsave in split vectors */
 # define ELF_NVSRHALFREG 32	/* Half the vsx registers */
 # define ELF_GREG_TYPE	elf_greg_t64
+# define ELF_ARCH	EM_PPC64
+# define ELF_CLASS	ELFCLASS64
+typedef elf_greg_t64 elf_greg_t;
+typedef elf_gregset_t64 elf_gregset_t;
 #else
 # define ELF_NEVRREG	34	/* includes acc (as 2) */
 # define ELF_NVRREG	33	/* includes vscr */
 # define ELF_GREG_TYPE	elf_greg_t32
 # define ELF_ARCH	EM_PPC
 # define ELF_CLASS	ELFCLASS32
-# define ELF_DATA	ELFDATA2MSB
+typedef elf_greg_t32 elf_greg_t;
+typedef elf_gregset_t32 elf_gregset_t;
 #endif /* __powerpc64__ */
 
-#ifndef ELF_ARCH
-# define ELF_ARCH	EM_PPC64
-# define ELF_CLASS	ELFCLASS64
-# define ELF_DATA	ELFDATA2MSB
-  typedef elf_greg_t64 elf_greg_t;
-  typedef elf_gregset_t64 elf_gregset_t;
+#ifdef __BIG_ENDIAN__
+#define ELF_DATA	ELFDATA2MSB
 #else
-  /* Assumption: ELF_ARCH == EM_PPC and ELF_CLASS == ELFCLASS32 */
-  typedef elf_greg_t32 elf_greg_t;
-  typedef elf_gregset_t32 elf_gregset_t;
-#endif /* ELF_ARCH */
+#define ELF_DATA	ELFDATA2LSB
+#endif
 
 /* Floating point registers */
 typedef double elf_fpreg_t;
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index a8619bf..445cb6e 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -55,7 +55,6 @@ obj-$(CONFIG_PPC_RTAS)		+= rtas.o rtas-rtc.o $(rtaspci-y-y)
 obj-$(CONFIG_PPC_RTAS_DAEMON)	+= rtasd.o
 obj-$(CONFIG_RTAS_FLASH)	+= rtas_flash.o
 obj-$(CONFIG_RTAS_PROC)		+= rtas-proc.o
-obj-$(CONFIG_LPARCFG)		+= lparcfg.o
 obj-$(CONFIG_IBMVIO)		+= vio.o
 obj-$(CONFIG_IBMEBUS)           += ibmebus.o
 obj-$(CONFIG_EEH)              += eeh.o eeh_pe.o eeh_dev.o eeh_cache.o \
@@ -117,9 +116,7 @@ obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
 obj-$(CONFIG_FTRACE_SYSCALLS)	+= ftrace.o
 
-obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o
-
-ifneq ($(CONFIG_PPC_INDIRECT_IO),y)
+ifneq ($(CONFIG_PPC_INDIRECT_PIO),y)
 obj-y				+= iomap.o
 endif
 
diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index ee5b690..a27ccd5 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -651,6 +651,10 @@ static int emulate_vsx(unsigned char __user *addr, unsigned int reg,
 	int sw = 0;
 	int i, j;
 
+	/* userland only */
+	if (unlikely(!user_mode(regs)))
+		return 0;
+
 	flush_vsx_to_thread(current);
 
 	if (reg < 32)
@@ -764,6 +768,16 @@ int fix_alignment(struct pt_regs *regs)
 	nb = aligninfo[instr].len;
 	flags = aligninfo[instr].flags;
 
+	/* ldbrx/stdbrx overlap lfs/stfs in the DSISR unfortunately */
+	if (IS_XFORM(instruction) && ((instruction >> 1) & 0x3ff) == 532) {
+		nb = 8;
+		flags = LD+SW;
+	} else if (IS_XFORM(instruction) &&
+		   ((instruction >> 1) & 0x3ff) == 660) {
+		nb = 8;
+		flags = ST+SW;
+	}
+
 	/* Byteswap little endian loads and stores */
 	swiz = 0;
 	if (regs->msr & MSR_LE) {
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 8207459..502c7a4 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -80,10 +80,11 @@ int main(void)
 	DEFINE(TASKTHREADPPR, offsetof(struct task_struct, thread.ppr));
 #else
 	DEFINE(THREAD_INFO, offsetof(struct task_struct, stack));
+	DEFINE(THREAD_INFO_GAP, _ALIGN_UP(sizeof(struct thread_info), 16));
+	DEFINE(KSP_LIMIT, offsetof(struct thread_struct, ksp_limit));
 #endif /* CONFIG_PPC64 */
 
 	DEFINE(KSP, offsetof(struct thread_struct, ksp));
-	DEFINE(KSP_LIMIT, offsetof(struct thread_struct, ksp_limit));
 	DEFINE(PT_REGS, offsetof(struct thread_struct, regs));
 #ifdef CONFIG_BOOKE
 	DEFINE(THREAD_NORMSAVES, offsetof(struct thread_struct, normsave[0]));
@@ -454,6 +455,7 @@ int main(void)
 	DEFINE(VCPU_SPRG2, offsetof(struct kvm_vcpu, arch.shregs.sprg2));
 	DEFINE(VCPU_SPRG3, offsetof(struct kvm_vcpu, arch.shregs.sprg3));
 #endif
+	DEFINE(VCPU_SHARED_SPRG3, offsetof(struct kvm_vcpu_arch_shared, sprg3));
 	DEFINE(VCPU_SHARED_SPRG4, offsetof(struct kvm_vcpu_arch_shared, sprg4));
 	DEFINE(VCPU_SHARED_SPRG5, offsetof(struct kvm_vcpu_arch_shared, sprg5));
 	DEFINE(VCPU_SHARED_SPRG6, offsetof(struct kvm_vcpu_arch_shared, sprg6));
diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index ac8f527..41c011c 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -25,11 +25,6 @@
 static void scrollscreen(void);
 #endif
 
-static void draw_byte(unsigned char c, long locX, long locY);
-static void draw_byte_32(unsigned char *bits, unsigned int *base, int rb);
-static void draw_byte_16(unsigned char *bits, unsigned int *base, int rb);
-static void draw_byte_8(unsigned char *bits, unsigned int *base, int rb);
-
 #define __force_data __attribute__((__section__(".data")))
 
 static int g_loc_X __force_data;
@@ -52,6 +47,26 @@ static unsigned char vga_font[cmapsz];
 int boot_text_mapped __force_data = 0;
 int force_printk_to_btext = 0;
 
+extern void rmci_on(void);
+extern void rmci_off(void);
+
+static inline void rmci_maybe_on(void)
+{
+#if defined(CONFIG_PPC_EARLY_DEBUG_BOOTX) && defined(CONFIG_PPC64)
+	if (!(mfmsr() & MSR_DR))
+		rmci_on();
+#endif
+}
+
+static inline void rmci_maybe_off(void)
+{
+#if defined(CONFIG_PPC_EARLY_DEBUG_BOOTX) && defined(CONFIG_PPC64)
+	if (!(mfmsr() & MSR_DR))
+		rmci_off();
+#endif
+}
+
+
 #ifdef CONFIG_PPC32
 /* Calc BAT values for mapping the display and store them
  * in disp_BAT.  Those values are then used from head.S to map
@@ -134,7 +149,7 @@ void __init btext_unmap(void)
  *    changes.
  */
 
-static void map_boot_text(void)
+void btext_map(void)
 {
 	unsigned long base, offset, size;
 	unsigned char *vbase;
@@ -209,7 +224,7 @@ int btext_initialize(struct device_node *np)
 	dispDeviceRect[2] = width;
 	dispDeviceRect[3] = height;
 
-	map_boot_text();
+	btext_map();
 
 	return 0;
 }
@@ -283,7 +298,7 @@ void btext_update_display(unsigned long phys, int width, int height,
 		iounmap(logicalDisplayBase);
 		boot_text_mapped = 0;
 	}
-	map_boot_text();
+	btext_map();
 	g_loc_X = 0;
 	g_loc_Y = 0;
 	g_max_loc_X = width / 8;
@@ -298,6 +313,7 @@ void btext_clearscreen(void)
 					(dispDeviceDepth >> 3)) >> 2;
 	int i,j;
 
+	rmci_maybe_on();
 	for (i=0; i<(dispDeviceRect[3] - dispDeviceRect[1]); i++)
 	{
 		unsigned int *ptr = base;
@@ -305,6 +321,7 @@ void btext_clearscreen(void)
 			*(ptr++) = 0;
 		base += (dispDeviceRowBytes >> 2);
 	}
+	rmci_maybe_off();
 }
 
 void btext_flushscreen(void)
@@ -355,6 +372,8 @@ static void scrollscreen(void)
 				   (dispDeviceDepth >> 3)) >> 2;
 	int i,j;
 
+	rmci_maybe_on();
+
 	for (i=0; i<(dispDeviceRect[3] - dispDeviceRect[1] - 16); i++)
 	{
 		unsigned int *src_ptr = src;
@@ -371,9 +390,116 @@ static void scrollscreen(void)
 			*(dst_ptr++) = 0;
 		dst += (dispDeviceRowBytes >> 2);
 	}
+
+	rmci_maybe_off();
 }
 #endif /* ndef NO_SCROLL */
 
+static unsigned int expand_bits_8[16] = {
+	0x00000000,
+	0x000000ff,
+	0x0000ff00,
+	0x0000ffff,
+	0x00ff0000,
+	0x00ff00ff,
+	0x00ffff00,
+	0x00ffffff,
+	0xff000000,
+	0xff0000ff,
+	0xff00ff00,
+	0xff00ffff,
+	0xffff0000,
+	0xffff00ff,
+	0xffffff00,
+	0xffffffff
+};
+
+static unsigned int expand_bits_16[4] = {
+	0x00000000,
+	0x0000ffff,
+	0xffff0000,
+	0xffffffff
+};
+
+
+static void draw_byte_32(unsigned char *font, unsigned int *base, int rb)
+{
+	int l, bits;
+	int fg = 0xFFFFFFFFUL;
+	int bg = 0x00000000UL;
+
+	for (l = 0; l < 16; ++l)
+	{
+		bits = *font++;
+		base[0] = (-(bits >> 7) & fg) ^ bg;
+		base[1] = (-((bits >> 6) & 1) & fg) ^ bg;
+		base[2] = (-((bits >> 5) & 1) & fg) ^ bg;
+		base[3] = (-((bits >> 4) & 1) & fg) ^ bg;
+		base[4] = (-((bits >> 3) & 1) & fg) ^ bg;
+		base[5] = (-((bits >> 2) & 1) & fg) ^ bg;
+		base[6] = (-((bits >> 1) & 1) & fg) ^ bg;
+		base[7] = (-(bits & 1) & fg) ^ bg;
+		base = (unsigned int *) ((char *)base + rb);
+	}
+}
+
+static inline void draw_byte_16(unsigned char *font, unsigned int *base, int rb)
+{
+	int l, bits;
+	int fg = 0xFFFFFFFFUL;
+	int bg = 0x00000000UL;
+	unsigned int *eb = (int *)expand_bits_16;
+
+	for (l = 0; l < 16; ++l)
+	{
+		bits = *font++;
+		base[0] = (eb[bits >> 6] & fg) ^ bg;
+		base[1] = (eb[(bits >> 4) & 3] & fg) ^ bg;
+		base[2] = (eb[(bits >> 2) & 3] & fg) ^ bg;
+		base[3] = (eb[bits & 3] & fg) ^ bg;
+		base = (unsigned int *) ((char *)base + rb);
+	}
+}
+
+static inline void draw_byte_8(unsigned char *font, unsigned int *base, int rb)
+{
+	int l, bits;
+	int fg = 0x0F0F0F0FUL;
+	int bg = 0x00000000UL;
+	unsigned int *eb = (int *)expand_bits_8;
+
+	for (l = 0; l < 16; ++l)
+	{
+		bits = *font++;
+		base[0] = (eb[bits >> 4] & fg) ^ bg;
+		base[1] = (eb[bits & 0xf] & fg) ^ bg;
+		base = (unsigned int *) ((char *)base + rb);
+	}
+}
+
+static noinline void draw_byte(unsigned char c, long locX, long locY)
+{
+	unsigned char *base	= calc_base(locX << 3, locY << 4);
+	unsigned char *font	= &vga_font[((unsigned int)c) * 16];
+	int rb			= dispDeviceRowBytes;
+
+	rmci_maybe_on();
+	switch(dispDeviceDepth) {
+	case 24:
+	case 32:
+		draw_byte_32(font, (unsigned int *)base, rb);
+		break;
+	case 15:
+	case 16:
+		draw_byte_16(font, (unsigned int *)base, rb);
+		break;
+	case 8:
+		draw_byte_8(font, (unsigned int *)base, rb);
+		break;
+	}
+	rmci_maybe_off();
+}
+
 void btext_drawchar(char c)
 {
 	int cline = 0;
@@ -465,107 +591,12 @@ void btext_drawhex(unsigned long v)
 	btext_drawchar(' ');
 }
 
-static void draw_byte(unsigned char c, long locX, long locY)
-{
-	unsigned char *base	= calc_base(locX << 3, locY << 4);
-	unsigned char *font	= &vga_font[((unsigned int)c) * 16];
-	int rb			= dispDeviceRowBytes;
-
-	switch(dispDeviceDepth) {
-	case 24:
-	case 32:
-		draw_byte_32(font, (unsigned int *)base, rb);
-		break;
-	case 15:
-	case 16:
-		draw_byte_16(font, (unsigned int *)base, rb);
-		break;
-	case 8:
-		draw_byte_8(font, (unsigned int *)base, rb);
-		break;
-	}
-}
-
-static unsigned int expand_bits_8[16] = {
-	0x00000000,
-	0x000000ff,
-	0x0000ff00,
-	0x0000ffff,
-	0x00ff0000,
-	0x00ff00ff,
-	0x00ffff00,
-	0x00ffffff,
-	0xff000000,
-	0xff0000ff,
-	0xff00ff00,
-	0xff00ffff,
-	0xffff0000,
-	0xffff00ff,
-	0xffffff00,
-	0xffffffff
-};
-
-static unsigned int expand_bits_16[4] = {
-	0x00000000,
-	0x0000ffff,
-	0xffff0000,
-	0xffffffff
-};
-
-
-static void draw_byte_32(unsigned char *font, unsigned int *base, int rb)
-{
-	int l, bits;
-	int fg = 0xFFFFFFFFUL;
-	int bg = 0x00000000UL;
-
-	for (l = 0; l < 16; ++l)
-	{
-		bits = *font++;
-		base[0] = (-(bits >> 7) & fg) ^ bg;
-		base[1] = (-((bits >> 6) & 1) & fg) ^ bg;
-		base[2] = (-((bits >> 5) & 1) & fg) ^ bg;
-		base[3] = (-((bits >> 4) & 1) & fg) ^ bg;
-		base[4] = (-((bits >> 3) & 1) & fg) ^ bg;
-		base[5] = (-((bits >> 2) & 1) & fg) ^ bg;
-		base[6] = (-((bits >> 1) & 1) & fg) ^ bg;
-		base[7] = (-(bits & 1) & fg) ^ bg;
-		base = (unsigned int *) ((char *)base + rb);
-	}
-}
-
-static void draw_byte_16(unsigned char *font, unsigned int *base, int rb)
-{
-	int l, bits;
-	int fg = 0xFFFFFFFFUL;
-	int bg = 0x00000000UL;
-	unsigned int *eb = (int *)expand_bits_16;
-
-	for (l = 0; l < 16; ++l)
-	{
-		bits = *font++;
-		base[0] = (eb[bits >> 6] & fg) ^ bg;
-		base[1] = (eb[(bits >> 4) & 3] & fg) ^ bg;
-		base[2] = (eb[(bits >> 2) & 3] & fg) ^ bg;
-		base[3] = (eb[bits & 3] & fg) ^ bg;
-		base = (unsigned int *) ((char *)base + rb);
-	}
-}
-
-static void draw_byte_8(unsigned char *font, unsigned int *base, int rb)
+void __init udbg_init_btext(void)
 {
-	int l, bits;
-	int fg = 0x0F0F0F0FUL;
-	int bg = 0x00000000UL;
-	unsigned int *eb = (int *)expand_bits_8;
-
-	for (l = 0; l < 16; ++l)
-	{
-		bits = *font++;
-		base[0] = (eb[bits >> 4] & fg) ^ bg;
-		base[1] = (eb[bits & 0xf] & fg) ^ bg;
-		base = (unsigned int *) ((char *)base + rb);
-	}
+	/* If btext is enabled, we might have a BAT setup for early display,
+	 * thus we do enable some very basic udbg output
+	 */
+	udbg_putc = btext_drawchar;
 }
 
 static unsigned char vga_font[cmapsz] = {
@@ -913,10 +944,3 @@ static unsigned char vga_font[cmapsz] = {
 0x00, 0x00, 0x00, 0x00,
 };
 
-void __init udbg_init_btext(void)
-{
-	/* If btext is enabled, we might have a BAT setup for early display,
-	 * thus we do enable some very basic udbg output
-	 */
-	udbg_putc = btext_drawchar;
-}
diff --git a/arch/powerpc/kernel/cacheinfo.c b/arch/powerpc/kernel/cacheinfo.c
index 9262cf2..6549327 100644
--- a/arch/powerpc/kernel/cacheinfo.c
+++ b/arch/powerpc/kernel/cacheinfo.c
@@ -196,7 +196,7 @@ static void cache_cpu_set(struct cache *cache, int cpu)
 static int cache_size(const struct cache *cache, unsigned int *ret)
 {
 	const char *propname;
-	const u32 *cache_size;
+	const __be32 *cache_size;
 
 	propname = cache_type_info[cache->type].size_prop;
 
@@ -204,7 +204,7 @@ static int cache_size(const struct cache *cache, unsigned int *ret)
 	if (!cache_size)
 		return -ENODEV;
 
-	*ret = *cache_size;
+	*ret = of_read_number(cache_size, 1);
 	return 0;
 }
 
@@ -222,7 +222,7 @@ static int cache_size_kb(const struct cache *cache, unsigned int *ret)
 /* not cache_line_size() because that's a macro in include/linux/cache.h */
 static int cache_get_line_size(const struct cache *cache, unsigned int *ret)
 {
-	const u32 *line_size;
+	const __be32 *line_size;
 	int i, lim;
 
 	lim = ARRAY_SIZE(cache_type_info[cache->type].line_size_props);
@@ -239,14 +239,14 @@ static int cache_get_line_size(const struct cache *cache, unsigned int *ret)
 	if (!line_size)
 		return -ENODEV;
 
-	*ret = *line_size;
+	*ret = of_read_number(line_size, 1);
 	return 0;
 }
 
 static int cache_nr_sets(const struct cache *cache, unsigned int *ret)
 {
 	const char *propname;
-	const u32 *nr_sets;
+	const __be32 *nr_sets;
 
 	propname = cache_type_info[cache->type].nr_sets_prop;
 
@@ -254,7 +254,7 @@ static int cache_nr_sets(const struct cache *cache, unsigned int *ret)
 	if (!nr_sets)
 		return -ENODEV;
 
-	*ret = *nr_sets;
+	*ret = of_read_number(nr_sets, 1);
 	return 0;
 }
 
diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
index 0b9af01..bfb18c7 100644
--- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S
+++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
@@ -75,7 +75,7 @@ _GLOBAL(__setup_cpu_e500v2)
 	bl	__e500_icache_setup
 	bl	__e500_dcache_setup
 	bl	__setup_e500_ivors
-#ifdef CONFIG_FSL_RIO
+#if defined(CONFIG_FSL_RIO) || defined(CONFIG_FSL_PCI)
 	/* Ensure that RFXE is set */
 	mfspr	r3,SPRN_HID1
 	oris	r3,r3,HID1_RFXE@h
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 22973a7..597d954 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -2105,7 +2105,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 			MMU_FTR_USE_TLBILX,
 		.icache_bsize		= 64,
 		.dcache_bsize		= 64,
-		.num_pmcs		= 4,
+		.num_pmcs		= 6,
 		.oprofile_cpu_type	= "ppc/e6500",
 		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.cpu_setup		= __setup_cpu_e6500,
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 2bd0b88..c04cdf7 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -102,7 +102,8 @@ BEGIN_FW_FTR_SECTION
 	/* if from user, see if there are any DTL entries to process */
 	ld	r10,PACALPPACAPTR(r13)	/* get ptr to VPA */
 	ld	r11,PACA_DTL_RIDX(r13)	/* get log read index */
-	ld	r10,LPPACA_DTLIDX(r10)	/* get log write index */
+	addi	r10,r10,LPPACA_DTLIDX
+	LDX_BE	r10,0,r10		/* get log write index */
 	cmpd	cr1,r11,r10
 	beq+	cr1,33f
 	bl	.accumulate_stolen_time
@@ -522,9 +523,11 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 	 */
 	ld	r9,PACA_SLBSHADOWPTR(r13)
 	li	r12,0
-	std	r12,SLBSHADOW_STACKESID(r9) /* Clear ESID */
-	std	r7,SLBSHADOW_STACKVSID(r9)  /* Save VSID */
-	std	r0,SLBSHADOW_STACKESID(r9)  /* Save ESID */
+	std	r12,SLBSHADOW_STACKESID(r9)	/* Clear ESID */
+	li	r12,SLBSHADOW_STACKVSID
+	STDX_BE	r7,r12,r9			/* Save VSID */
+	li	r12,SLBSHADOW_STACKESID
+	STDX_BE	r0,r12,r9			/* Save ESID */
 
 	/* No need to check for MMU_FTR_NO_SLBIE_B here, since when
 	 * we have 1TB segments, the only CPUs known to have the errata
@@ -575,34 +578,15 @@ BEGIN_FTR_SECTION
 	ld	r7,DSCR_DEFAULT@toc(2)
 	ld	r0,THREAD_DSCR(r4)
 	cmpwi	r6,0
-	li	r8, FSCR_DSCR
 	bne	1f
 	ld	r0,0(r7)
-	b	3f
 1:
-  BEGIN_FTR_SECTION_NESTED(70)
-	mfspr	r6, SPRN_FSCR
-	or	r6, r6, r8
-	mtspr	SPRN_FSCR, r6
-    BEGIN_FTR_SECTION_NESTED(69)
-	mfspr	r6, SPRN_HFSCR
-	or	r6, r6, r8
-	mtspr	SPRN_HFSCR, r6
-    END_FTR_SECTION_NESTED(CPU_FTR_HVMODE, CPU_FTR_HVMODE, 69)
-	b	4f
-  END_FTR_SECTION_NESTED(CPU_FTR_ARCH_207S, CPU_FTR_ARCH_207S, 70)
-3:
-  BEGIN_FTR_SECTION_NESTED(70)
-	mfspr	r6, SPRN_FSCR
-	andc	r6, r6, r8
-	mtspr	SPRN_FSCR, r6
-    BEGIN_FTR_SECTION_NESTED(69)
-	mfspr	r6, SPRN_HFSCR
-	andc	r6, r6, r8
-	mtspr	SPRN_HFSCR, r6
-    END_FTR_SECTION_NESTED(CPU_FTR_HVMODE, CPU_FTR_HVMODE, 69)
-  END_FTR_SECTION_NESTED(CPU_FTR_ARCH_207S, CPU_FTR_ARCH_207S, 70)
-4:	cmpd	r0,r25
+BEGIN_FTR_SECTION_NESTED(70)
+	mfspr	r8, SPRN_FSCR
+	rldimi	r8, r6, FSCR_DSCR_LG, (63 - FSCR_DSCR_LG)
+	mtspr	SPRN_FSCR, r8
+END_FTR_SECTION_NESTED(CPU_FTR_ARCH_207S, CPU_FTR_ARCH_207S, 70)
+	cmpd	r0,r25
 	beq	2f
 	mtspr	SPRN_DSCR,r0
 2:
@@ -737,9 +721,9 @@ resume_kernel:
 
 	/*
 	 * Here we are preempting the current task. We want to make
-	 * sure we are soft-disabled first
+	 * sure we are soft-disabled first and reconcile irq state.
 	 */
-	SOFT_DISABLE_INTS(r3,r4)
+	RECONCILE_IRQ_STATE(r3,r4)
 1:	bl	.preempt_schedule_irq
 
 	/* Re-test flags and eventually loop */
diff --git a/arch/powerpc/kernel/epapr_paravirt.c b/arch/powerpc/kernel/epapr_paravirt.c
index d44a571..6300c13 100644
--- a/arch/powerpc/kernel/epapr_paravirt.c
+++ b/arch/powerpc/kernel/epapr_paravirt.c
@@ -30,22 +30,20 @@ extern u32 epapr_ev_idle_start[];
 
 bool epapr_paravirt_enabled;
 
-static int __init epapr_paravirt_init(void)
+static int __init early_init_dt_scan_epapr(unsigned long node,
+					   const char *uname,
+					   int depth, void *data)
 {
-	struct device_node *hyper_node;
 	const u32 *insts;
-	int len, i;
+	unsigned long len;
+	int i;
 
-	hyper_node = of_find_node_by_path("/hypervisor");
-	if (!hyper_node)
-		return -ENODEV;
-
-	insts = of_get_property(hyper_node, "hcall-instructions", &len);
+	insts = of_get_flat_dt_prop(node, "hcall-instructions", &len);
 	if (!insts)
-		return -ENODEV;
+		return 0;
 
 	if (len % 4 || len > (4 * 4))
-		return -ENODEV;
+		return -1;
 
 	for (i = 0; i < (len / 4); i++) {
 		patch_instruction(epapr_hypercall_start + i, insts[i]);
@@ -55,13 +53,19 @@ static int __init epapr_paravirt_init(void)
 	}
 
 #if !defined(CONFIG_64BIT) || defined(CONFIG_PPC_BOOK3E_64)
-	if (of_get_property(hyper_node, "has-idle", NULL))
+	if (of_get_flat_dt_prop(node, "has-idle", NULL))
 		ppc_md.power_save = epapr_ev_idle;
 #endif
 
 	epapr_paravirt_enabled = true;
 
+	return 1;
+}
+
+int __init epapr_paravirt_early_init(void)
+{
+	of_scan_flat_dt(early_init_dt_scan_epapr, NULL);
+
 	return 0;
 }
 
-early_initcall(epapr_paravirt_init);
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 645170a..2d06704 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -198,9 +198,9 @@ exc_##n##_common:							    \
 /* This second version is meant for exceptions that don't immediately
  * hard-enable. We set a bit in paca->irq_happened to ensure that
  * a subsequent call to arch_local_irq_restore() will properly
- * hard-enable and avoid the fast-path
+ * hard-enable and avoid the fast-path, and then reconcile irq state.
  */
-#define INTS_DISABLE	SOFT_DISABLE_INTS(r3,r4)
+#define INTS_DISABLE	RECONCILE_IRQ_STATE(r3,r4)
 
 /* This is called by exceptions that used INTS_KEEP (that did not touch
  * irq indicators in the PACA). This will restore MSR:EE to it's previous
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 902ca3c..3a9ed6a 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -293,27 +293,31 @@ system_call_pSeries:
 	 * out of line to handle them
 	 */
 	. = 0xe00
-hv_exception_trampoline:
+hv_data_storage_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	h_data_storage_hv
 
 	. = 0xe20
+hv_instr_storage_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	h_instr_storage_hv
 
 	. = 0xe40
+emulation_assist_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	emulation_assist_hv
 
 	. = 0xe60
+hv_exception_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	hmi_exception_hv
 
 	. = 0xe80
+hv_doorbell_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	h_doorbell_hv
@@ -323,32 +327,32 @@ hv_exception_trampoline:
 	 * prolog code of the PerformanceMonitor one. A little
 	 * trickery is thus necessary
 	 */
-performance_monitor_pSeries_1:
 	. = 0xf00
+performance_monitor_pseries_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	performance_monitor_pSeries
 
-altivec_unavailable_pSeries_1:
 	. = 0xf20
+altivec_unavailable_pseries_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	altivec_unavailable_pSeries
 
-vsx_unavailable_pSeries_1:
 	. = 0xf40
+vsx_unavailable_pseries_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	vsx_unavailable_pSeries
 
-facility_unavailable_trampoline:
 	. = 0xf60
+facility_unavailable_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	facility_unavailable_pSeries
 
-hv_facility_unavailable_trampoline:
 	. = 0xf80
+hv_facility_unavailable_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	facility_unavailable_hv
@@ -367,11 +371,7 @@ denorm_exception_hv:
 	HMT_MEDIUM_PPR_DISCARD
 	mtspr	SPRN_SPRG_HSCRATCH0,r13
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	std	r11,PACA_EXGEN+EX_R11(r13)
-	std	r12,PACA_EXGEN+EX_R12(r13)
-	mfspr	r9,SPRN_SPRG_HSCRATCH0
-	std	r9,PACA_EXGEN+EX_R13(r13)
-	mfcr	r9
+	EXCEPTION_PROLOG_1(PACA_EXGEN, NOTEST, 0x1500)
 
 #ifdef CONFIG_PPC_DENORMALISATION
 	mfspr	r10,SPRN_HSRR1
@@ -381,6 +381,7 @@ denorm_exception_hv:
 	bne+	denorm_assist
 #endif
 
+	KVMTEST(0x1500)
 	EXCEPTION_PROLOG_PSERIES_1(denorm_common, EXC_HV)
 	KVM_HANDLER_SKIP(PACA_EXGEN, EXC_STD, 0x1500)
 
@@ -501,6 +502,10 @@ denorm_done:
 	mtcrf	0x80,r9
 	ld	r9,PACA_EXGEN+EX_R9(r13)
 	RESTORE_PPR_PACA(PACA_EXGEN, r10)
+BEGIN_FTR_SECTION
+	ld	r10,PACA_EXGEN+EX_CFAR(r13)
+	mtspr	SPRN_CFAR,r10
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 	ld	r10,PACA_EXGEN+EX_R10(r13)
 	ld	r11,PACA_EXGEN+EX_R11(r13)
 	ld	r12,PACA_EXGEN+EX_R12(r13)
@@ -808,6 +813,7 @@ system_call_relon_pSeries:
 	b	.	/* Can't happen, see v2.07 Book III-S section 6.5 */
 
 	. = 0x4e40
+emulation_assist_relon_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	emulation_assist_relon_hv
@@ -816,36 +822,37 @@ system_call_relon_pSeries:
 	b	.	/* Can't happen, see v2.07 Book III-S section 6.5 */
 
 	. = 0x4e80
+h_doorbell_relon_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	h_doorbell_relon_hv
 
-performance_monitor_relon_pSeries_1:
 	. = 0x4f00
+performance_monitor_relon_pseries_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	performance_monitor_relon_pSeries
 
-altivec_unavailable_relon_pSeries_1:
 	. = 0x4f20
+altivec_unavailable_relon_pseries_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	altivec_unavailable_relon_pSeries
 
-vsx_unavailable_relon_pSeries_1:
 	. = 0x4f40
+vsx_unavailable_relon_pseries_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	vsx_unavailable_relon_pSeries
 
-facility_unavailable_relon_trampoline:
 	. = 0x4f60
+facility_unavailable_relon_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	facility_unavailable_relon_pSeries
 
-hv_facility_unavailable_relon_trampoline:
 	. = 0x4f80
+hv_facility_unavailable_relon_trampoline:
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	b	hv_facility_unavailable_relon_hv
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index 8a9b6f5..67ee0d6 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -822,14 +822,6 @@ finish_tlb_load:
 	rfi			/* Should sync shadow TLBs */
 	b	.		/* prevent prefetch past rfi */
 
-/* extern void giveup_fpu(struct task_struct *prev)
- *
- * The PowerPC 4xx family of processors do not have an FPU, so this just
- * returns.
- */
-_ENTRY(giveup_fpu)
-	blr
-
 /* This is where the main kernel code starts.
  */
 start_here:
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index 97e2671..c334f53 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -784,16 +784,6 @@ _GLOBAL(__fixup_440A_mcheck)
 	sync
 	blr
 
-/*
- * extern void giveup_fpu(struct task_struct *prev)
- *
- * The 44x core does not have an FPU.
- */
-#ifndef CONFIG_PPC_FPU
-_GLOBAL(giveup_fpu)
-	blr
-#endif
-
 _GLOBAL(set_context)
 
 #ifdef CONFIG_BDI_SWITCH
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index b61363d..3d11d80 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -703,6 +703,7 @@ _GLOBAL(relative_toc)
 	mtlr	r0
 	blr
 
+.balign 8
 p_toc:	.llong	__toc_start + 0x8000 - 0b
 
 /*
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index b2a5860..1b92a97 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -691,10 +691,6 @@ modified_instr:
 	b	151b
 #endif
 
-	.globl	giveup_fpu
-giveup_fpu:
-	blr
-
 /*
  * This is where the main kernel code starts.
  */
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index d10a7ca..289afaf 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -948,16 +948,6 @@ _GLOBAL(giveup_spe)
 #endif /* CONFIG_SPE */
 
 /*
- * extern void giveup_fpu(struct task_struct *prev)
- *
- * Not all FSL Book-E cores have an FPU
- */
-#ifndef CONFIG_PPC_FPU
-_GLOBAL(giveup_fpu)
-	blr
-#endif
-
-/*
  * extern void abort(void)
  *
  * At present, this routine just applies a system reset.
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index 16a7c23..1114d13 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -292,6 +292,7 @@ out:
 		return rc;
 	return count;
 }
+static BUS_ATTR(probe, S_IWUSR, NULL, ibmebus_store_probe);
 
 static ssize_t ibmebus_store_remove(struct bus_type *bus,
 				    const char *buf, size_t count)
@@ -317,13 +318,14 @@ static ssize_t ibmebus_store_remove(struct bus_type *bus,
 		return -ENODEV;
 	}
 }
+static BUS_ATTR(remove, S_IWUSR, NULL, ibmebus_store_remove);
 
-
-static struct bus_attribute ibmebus_bus_attrs[] = {
-	__ATTR(probe, S_IWUSR, NULL, ibmebus_store_probe),
-	__ATTR(remove, S_IWUSR, NULL, ibmebus_store_remove),
-	__ATTR_NULL
+static struct attribute *ibmbus_bus_attrs[] = {
+	&bus_attr_probe.attr,
+	&bus_attr_remove.attr,
+	NULL,
 };
+ATTRIBUTE_GROUPS(ibmbus_bus);
 
 static int ibmebus_bus_bus_match(struct device *dev, struct device_driver *drv)
 {
@@ -713,7 +715,7 @@ static struct dev_pm_ops ibmebus_bus_dev_pm_ops = {
 struct bus_type ibmebus_bus_type = {
 	.name      = "ibmebus",
 	.uevent    = of_device_uevent_modalias,
-	.bus_attrs = ibmebus_bus_attrs,
+	.bus_groups = ibmbus_bus_groups,
 	.match     = ibmebus_bus_bus_match,
 	.probe     = ibmebus_bus_device_probe,
 	.remove    = ibmebus_bus_device_remove,
diff --git a/arch/powerpc/kernel/io-workarounds.c b/arch/powerpc/kernel/io-workarounds.c
index fa0b54b..24b968f 100644
--- a/arch/powerpc/kernel/io-workarounds.c
+++ b/arch/powerpc/kernel/io-workarounds.c
@@ -53,6 +53,7 @@ static struct iowa_bus *iowa_pci_find(unsigned long vaddr, unsigned long paddr)
 	return NULL;
 }
 
+#ifdef CONFIG_PPC_INDIRECT_MMIO
 struct iowa_bus *iowa_mem_find_bus(const PCI_IO_ADDR addr)
 {
 	unsigned hugepage_shift;
@@ -90,13 +91,25 @@ struct iowa_bus *iowa_mem_find_bus(const PCI_IO_ADDR addr)
 
 	return bus;
 }
+#else /* CONFIG_PPC_INDIRECT_MMIO */
+struct iowa_bus *iowa_mem_find_bus(const PCI_IO_ADDR addr)
+{
+	return NULL;
+}
+#endif /* !CONFIG_PPC_INDIRECT_MMIO */
 
+#ifdef CONFIG_PPC_INDIRECT_PIO
 struct iowa_bus *iowa_pio_find_bus(unsigned long port)
 {
 	unsigned long vaddr = (unsigned long)pci_io_base + port;
 	return iowa_pci_find(vaddr, 0);
 }
-
+#else
+struct iowa_bus *iowa_pio_find_bus(unsigned long port)
+{
+	return NULL;
+}
+#endif
 
 #define DEF_PCI_AC_RET(name, ret, at, al, space, aa)		\
 static ret iowa_##name at					\
@@ -137,6 +150,7 @@ static const struct ppc_pci_io iowa_pci_io = {
 
 };
 
+#ifdef CONFIG_PPC_INDIRECT_MMIO
 static void __iomem *iowa_ioremap(phys_addr_t addr, unsigned long size,
 				  unsigned long flags, void *caller)
 {
@@ -151,6 +165,9 @@ static void __iomem *iowa_ioremap(phys_addr_t addr, unsigned long size,
 	}
 	return res;
 }
+#else /* CONFIG_PPC_INDIRECT_MMIO */
+#define iowa_ioremap NULL
+#endif /* !CONFIG_PPC_INDIRECT_MMIO */
 
 /* Enable IO workaround */
 static void io_workaround_init(void)
diff --git a/arch/powerpc/kernel/io.c b/arch/powerpc/kernel/io.c
index 886381f..2a2b4ae 100644
--- a/arch/powerpc/kernel/io.c
+++ b/arch/powerpc/kernel/io.c
@@ -25,6 +25,9 @@
 #include <asm/firmware.h>
 #include <asm/bug.h>
 
+/* See definition in io.h */
+bool isa_io_special;
+
 void _insb(const volatile u8 __iomem *port, void *buf, long count)
 {
 	u8 *tbuf = buf;
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index b20ff17..572bb5b 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -105,7 +105,7 @@ static int __init fail_iommu_debugfs(void)
 	struct dentry *dir = fault_create_debugfs_attr("fail_iommu",
 						       NULL, &fail_iommu);
 
-	return PTR_RET(dir);
+	return PTR_ERR_OR_ZERO(dir);
 }
 late_initcall(fail_iommu_debugfs);
 
@@ -661,7 +661,7 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid)
 	/* number of bytes needed for the bitmap */
 	sz = BITS_TO_LONGS(tbl->it_size) * sizeof(unsigned long);
 
-	page = alloc_pages_node(nid, GFP_ATOMIC, get_order(sz));
+	page = alloc_pages_node(nid, GFP_KERNEL, get_order(sz));
 	if (!page)
 		panic("iommu_init_table: Can't allocate %ld bytes\n", sz);
 	tbl->it_map = page_address(page);
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index c69440c..c7cb8c2 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -441,50 +441,6 @@ void migrate_irqs(void)
 }
 #endif
 
-static inline void handle_one_irq(unsigned int irq)
-{
-	struct thread_info *curtp, *irqtp;
-	unsigned long saved_sp_limit;
-	struct irq_desc *desc;
-
-	desc = irq_to_desc(irq);
-	if (!desc)
-		return;
-
-	/* Switch to the irq stack to handle this */
-	curtp = current_thread_info();
-	irqtp = hardirq_ctx[smp_processor_id()];
-
-	if (curtp == irqtp) {
-		/* We're already on the irq stack, just handle it */
-		desc->handle_irq(irq, desc);
-		return;
-	}
-
-	saved_sp_limit = current->thread.ksp_limit;
-
-	irqtp->task = curtp->task;
-	irqtp->flags = 0;
-
-	/* Copy the softirq bits in preempt_count so that the
-	 * softirq checks work in the hardirq context. */
-	irqtp->preempt_count = (irqtp->preempt_count & ~SOFTIRQ_MASK) |
-			       (curtp->preempt_count & SOFTIRQ_MASK);
-
-	current->thread.ksp_limit = (unsigned long)irqtp +
-		_ALIGN_UP(sizeof(struct thread_info), 16);
-
-	call_handle_irq(irq, desc, irqtp, desc->handle_irq);
-	current->thread.ksp_limit = saved_sp_limit;
-	irqtp->task = NULL;
-
-	/* Set any flag that may have been set on the
-	 * alternate stack
-	 */
-	if (irqtp->flags)
-		set_bits(irqtp->flags, &curtp->flags);
-}
-
 static inline void check_stack_overflow(void)
 {
 #ifdef CONFIG_DEBUG_STACKOVERFLOW
@@ -501,9 +457,9 @@ static inline void check_stack_overflow(void)
 #endif
 }
 
-void do_IRQ(struct pt_regs *regs)
+void __do_irq(struct pt_regs *regs)
 {
-	struct pt_regs *old_regs = set_irq_regs(regs);
+	struct irq_desc *desc;
 	unsigned int irq;
 
 	irq_enter();
@@ -519,18 +475,57 @@ void do_IRQ(struct pt_regs *regs)
 	 */
 	irq = ppc_md.get_irq();
 
-	/* We can hard enable interrupts now */
+	/* We can hard enable interrupts now to allow perf interrupts */
 	may_hard_irq_enable();
 
 	/* And finally process it */
-	if (irq != NO_IRQ)
-		handle_one_irq(irq);
-	else
+	if (unlikely(irq == NO_IRQ))
 		__get_cpu_var(irq_stat).spurious_irqs++;
+	else {
+		desc = irq_to_desc(irq);
+		if (likely(desc))
+			desc->handle_irq(irq, desc);
+	}
 
 	trace_irq_exit(regs);
 
 	irq_exit();
+}
+
+void do_IRQ(struct pt_regs *regs)
+{
+	struct pt_regs *old_regs = set_irq_regs(regs);
+	struct thread_info *curtp, *irqtp, *sirqtp;
+
+	/* Switch to the irq stack to handle this */
+	curtp = current_thread_info();
+	irqtp = hardirq_ctx[raw_smp_processor_id()];
+	sirqtp = softirq_ctx[raw_smp_processor_id()];
+
+	/* Already there ? */
+	if (unlikely(curtp == irqtp || curtp == sirqtp)) {
+		__do_irq(regs);
+		set_irq_regs(old_regs);
+		return;
+	}
+
+	/* Prepare the thread_info in the irq stack */
+	irqtp->task = curtp->task;
+	irqtp->flags = 0;
+
+	/* Copy the preempt_count so that the [soft]irq checks work. */
+	irqtp->preempt_count = curtp->preempt_count;
+
+	/* Switch stack and call */
+	call_do_irq(regs, irqtp);
+
+	/* Restore stack limit */
+	irqtp->task = NULL;
+
+	/* Copy back updates to the thread_info */
+	if (irqtp->flags)
+		set_bits(irqtp->flags, &curtp->flags);
+
 	set_irq_regs(old_regs);
 }
 
@@ -592,28 +587,22 @@ void irq_ctx_init(void)
 		memset((void *)softirq_ctx[i], 0, THREAD_SIZE);
 		tp = softirq_ctx[i];
 		tp->cpu = i;
-		tp->preempt_count = 0;
 
 		memset((void *)hardirq_ctx[i], 0, THREAD_SIZE);
 		tp = hardirq_ctx[i];
 		tp->cpu = i;
-		tp->preempt_count = HARDIRQ_OFFSET;
 	}
 }
 
 static inline void do_softirq_onstack(void)
 {
 	struct thread_info *curtp, *irqtp;
-	unsigned long saved_sp_limit = current->thread.ksp_limit;
 
 	curtp = current_thread_info();
 	irqtp = softirq_ctx[smp_processor_id()];
 	irqtp->task = curtp->task;
 	irqtp->flags = 0;
-	current->thread.ksp_limit = (unsigned long)irqtp +
-				    _ALIGN_UP(sizeof(struct thread_info), 16);
 	call_do_softirq(irqtp);
-	current->thread.ksp_limit = saved_sp_limit;
 	irqtp->task = NULL;
 
 	/* Set any flag that may have been set on the
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 0733b05..22e88dd 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -99,7 +99,7 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
 		legacy_serial_count = index + 1;
 
 	/* Check if there is a port who already claimed our slot */
-	if (legacy_serial_infos[index].np != 0) {
+	if (legacy_serial_infos[index].np != NULL) {
 		/* if we still have some room, move it, else override */
 		if (legacy_serial_count < MAX_LEGACY_SERIAL_PORTS) {
 			printk(KERN_DEBUG "Moved legacy port %d -> %d\n",
@@ -152,7 +152,7 @@ static int __init add_legacy_soc_port(struct device_node *np,
 				      struct device_node *soc_dev)
 {
 	u64 addr;
-	const u32 *addrp;
+	const __be32 *addrp;
 	upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ
 		| UPF_FIXED_PORT;
 	struct device_node *tsi = of_get_parent(np);
@@ -221,14 +221,19 @@ static int __init add_legacy_isa_port(struct device_node *np,
 	/* Translate ISA address. If it fails, we still register the port
 	 * with no translated address so that it can be picked up as an IO
 	 * port later by the serial driver
+	 *
+	 * Note: Don't even try on P8 lpc, we know it's not directly mapped
 	 */
-	taddr = of_translate_address(np, reg);
-	if (taddr == OF_BAD_ADDR)
+	if (!of_device_is_compatible(isa_brg, "ibm,power8-lpc")) {
+		taddr = of_translate_address(np, reg);
+		if (taddr == OF_BAD_ADDR)
+			taddr = 0;
+	} else
 		taddr = 0;
 
 	/* Add port, irq will be dealt with later */
-	return add_legacy_port(np, index, UPIO_PORT, be32_to_cpu(reg[1]), taddr,
-			       NO_IRQ, UPF_BOOT_AUTOCONF, 0);
+	return add_legacy_port(np, index, UPIO_PORT, be32_to_cpu(reg[1]),
+			       taddr, NO_IRQ, UPF_BOOT_AUTOCONF, 0);
 
 }
 
@@ -237,7 +242,7 @@ static int __init add_legacy_pci_port(struct device_node *np,
 				      struct device_node *pci_dev)
 {
 	u64 addr, base;
-	const u32 *addrp;
+	const __be32 *addrp;
 	unsigned int flags;
 	int iotype, index = -1, lindex = 0;
 
@@ -270,7 +275,7 @@ static int __init add_legacy_pci_port(struct device_node *np,
 	if (iotype == UPIO_MEM)
 		base = addr;
 	else
-		base = addrp[2];
+		base = of_read_number(&addrp[2], 1);
 
 	/* Try to guess an index... If we have subdevices of the pci dev,
 	 * we get to their "reg" property
@@ -307,19 +312,31 @@ static int __init add_legacy_pci_port(struct device_node *np,
 
 static void __init setup_legacy_serial_console(int console)
 {
-	struct legacy_serial_info *info =
-		&legacy_serial_infos[console];
+	struct legacy_serial_info *info = &legacy_serial_infos[console];
+	struct plat_serial8250_port *port = &legacy_serial_ports[console];
 	void __iomem *addr;
 
-	if (info->taddr == 0)
-		return;
-	addr = ioremap(info->taddr, 0x1000);
-	if (addr == NULL)
-		return;
+	/* Check if a translated MMIO address has been found */
+	if (info->taddr) {
+		addr = ioremap(info->taddr, 0x1000);
+		if (addr == NULL)
+			return;
+		udbg_uart_init_mmio(addr, 1);
+	} else {
+		/* Check if it's PIO and we support untranslated PIO */
+		if (port->iotype == UPIO_PORT && isa_io_special)
+			udbg_uart_init_pio(port->iobase, 1);
+		else
+			return;
+	}
+
+	/* Try to query the current speed */
 	if (info->speed == 0)
-		info->speed = udbg_probe_uart_speed(addr, info->clock);
+		info->speed = udbg_probe_uart_speed(info->clock);
+
+	/* Set it up */
 	DBG("default console speed = %d\n", info->speed);
-	udbg_init_uart(addr, info->speed, info->clock);
+	udbg_uart_setup(info->speed, info->clock);
 }
 
 /*
@@ -367,10 +384,13 @@ void __init find_legacy_serial_ports(void)
 	/* Next, fill our array with ISA ports */
 	for_each_node_by_type(np, "serial") {
 		struct device_node *isa = of_get_parent(np);
-		if (isa && !strcmp(isa->name, "isa")) {
-			index = add_legacy_isa_port(np, isa);
-			if (index >= 0 && np == stdout)
-				legacy_serial_console = index;
+		if (isa && (!strcmp(isa->name, "isa") ||
+			    !strcmp(isa->name, "lpc"))) {
+			if (of_device_is_available(np)) {
+				index = add_legacy_isa_port(np, isa);
+				if (index >= 0 && np == stdout)
+					legacy_serial_console = index;
+			}
 		}
 		of_node_put(isa);
 	}
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index e469f30..2b0ad98 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -36,26 +36,41 @@
 
 	.text
 
+/*
+ * We store the saved ksp_limit in the unused part
+ * of the STACK_FRAME_OVERHEAD
+ */
 _GLOBAL(call_do_softirq)
 	mflr	r0
 	stw	r0,4(r1)
+	lwz	r10,THREAD+KSP_LIMIT(r2)
+	addi	r11,r3,THREAD_INFO_GAP
 	stwu	r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3)
 	mr	r1,r3
+	stw	r10,8(r1)
+	stw	r11,THREAD+KSP_LIMIT(r2)
 	bl	__do_softirq
+	lwz	r10,8(r1)
 	lwz	r1,0(r1)
 	lwz	r0,4(r1)
+	stw	r10,THREAD+KSP_LIMIT(r2)
 	mtlr	r0
 	blr
 
-_GLOBAL(call_handle_irq)
+_GLOBAL(call_do_irq)
 	mflr	r0
 	stw	r0,4(r1)
-	mtctr	r6
-	stwu	r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r5)
-	mr	r1,r5
-	bctrl
+	lwz	r10,THREAD+KSP_LIMIT(r2)
+	addi	r11,r3,THREAD_INFO_GAP
+	stwu	r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r4)
+	mr	r1,r4
+	stw	r10,8(r1)
+	stw	r11,THREAD+KSP_LIMIT(r2)
+	bl	__do_irq
+	lwz	r10,8(r1)
 	lwz	r1,0(r1)
 	lwz	r0,4(r1)
+	stw	r10,THREAD+KSP_LIMIT(r2)
 	mtlr	r0
 	blr
 
@@ -327,8 +342,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_UNIFIED_ID_CACHE)
  *
  * flush_icache_range(unsigned long start, unsigned long stop)
  */
-_KPROBE(__flush_icache_range)
+_KPROBE(flush_icache_range)
 BEGIN_FTR_SECTION
+	isync
 	blr				/* for 601, do nothing */
 END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
 	li	r5,L1_CACHE_BYTES-1
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index 6820e45..e59caf8 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -40,14 +40,12 @@ _GLOBAL(call_do_softirq)
 	mtlr	r0
 	blr
 
-_GLOBAL(call_handle_irq)
-	ld	r8,0(r6)
+_GLOBAL(call_do_irq)
 	mflr	r0
 	std	r0,16(r1)
-	mtctr	r8
-	stdu	r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r5)
-	mr	r1,r5
-	bctrl
+	stdu	r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r4)
+	mr	r1,r4
+	bl	.__do_irq
 	ld	r1,0(r1)
 	ld	r0,16(r1)
 	mtlr	r0
@@ -67,8 +65,10 @@ PPC64_CACHES:
  *   flush all bytes from start through stop-1 inclusive
  */
 
-_KPROBE(__flush_icache_range)
-
+_KPROBE(flush_icache_range)
+BEGIN_FTR_SECTION
+	blr
+END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
 /*
  * Flush the data cache to memory 
  * 
@@ -247,6 +247,37 @@ _GLOBAL(__bswapdi2)
 	blr
 
 #if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE)
+
+_GLOBAL(rmci_on)
+	sync
+	isync
+	li	r3,0x100
+	rldicl	r3,r3,32,0
+	mfspr	r5,SPRN_HID4
+	or	r5,r5,r3
+	sync
+	mtspr	SPRN_HID4,r5
+	isync
+	slbia
+	isync
+	sync
+	blr
+
+_GLOBAL(rmci_off)
+	sync
+	isync
+	li	r3,0x100
+	rldicl	r3,r3,32,0
+	mfspr	r5,SPRN_HID4
+	andc	r5,r5,r3
+	sync
+	mtspr	SPRN_HID4,r5
+	isync
+	slbia
+	isync
+	sync
+	blr
+
 /*
  * Do an IO access in real mode
  */
@@ -416,19 +447,6 @@ _GLOBAL(scom970_write)
 	blr
 #endif /* CONFIG_CPU_FREQ_PMAC64 || CONFIG_CPU_FREQ_MAPLE */
 
-
-/*
- * disable_kernel_fp()
- * Disable the FPU.
- */
-_GLOBAL(disable_kernel_fp)
-	mfmsr	r3
-	rldicl	r0,r3,(63-MSR_FP_LG),1
-	rldicl	r3,r0,(MSR_FP_LG+1),0
-	mtmsrd	r3			/* disable use of fpu now */
-	isync
-	blr
-
 /* kexec_wait(phys_cpu)
  *
  * wait for the flag to change, indicating this kernel is going away but
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index f8f2468..3fc16e3 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -34,10 +34,10 @@ extern unsigned long __toc_start;
  */
 struct lppaca lppaca[] = {
 	[0 ... (NR_LPPACAS-1)] = {
-		.desc = 0xd397d781,	/* "LpPa" */
-		.size = sizeof(struct lppaca),
+		.desc = cpu_to_be32(0xd397d781),	/* "LpPa" */
+		.size = cpu_to_be16(sizeof(struct lppaca)),
 		.fpregs_in_use = 1,
-		.slb_count = 64,
+		.slb_count = cpu_to_be16(64),
 		.vmxregs_in_use = 0,
 		.page_ins = 0,
 	},
@@ -101,8 +101,8 @@ static inline void free_lppacas(void) { }
  */
 struct slb_shadow slb_shadow[] __cacheline_aligned = {
 	[0 ... (NR_CPUS-1)] = {
-		.persistent = SLB_NUM_BOLTED,
-		.buffer_length = sizeof(struct slb_shadow),
+		.persistent = cpu_to_be32(SLB_NUM_BOLTED),
+		.buffer_length = cpu_to_be32(sizeof(struct slb_shadow)),
 	},
 };
 
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 7d22a67..905a24b 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -306,7 +306,7 @@ static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
 	unsigned long io_offset = 0;
 	int i, res_bit;
 
-	if (hose == 0)
+	if (hose == NULL)
 		return NULL;		/* should never happen */
 
 	/* If memory, add on the PCI bridge address offset */
@@ -667,7 +667,7 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
 void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 				  struct device_node *dev, int primary)
 {
-	const u32 *ranges;
+	const __be32 *ranges;
 	int rlen;
 	int pna = of_n_addr_cells(dev);
 	int np = pna + 5;
@@ -687,7 +687,7 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 	/* Parse it */
 	while ((rlen -= np * 4) >= 0) {
 		/* Read next ranges element */
-		pci_space = ranges[0];
+		pci_space = of_read_number(ranges, 1);
 		pci_addr = of_read_number(ranges + 1, 2);
 		cpu_addr = of_translate_address(dev, ranges + 3);
 		size = of_read_number(ranges + pna + 3, 2);
@@ -704,7 +704,7 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 		/* Now consume following elements while they are contiguous */
 		for (; rlen >= np * sizeof(u32);
 		     ranges += np, rlen -= np * 4) {
-			if (ranges[0] != pci_space)
+			if (of_read_number(ranges, 1) != pci_space)
 				break;
 			pci_next = of_read_number(ranges + 1, 2);
 			cpu_next = of_translate_address(dev, ranges + 3);
@@ -1055,8 +1055,7 @@ void pcibios_fixup_bus(struct pci_bus *bus)
 	 * bases. This is -not- called when generating the PCI tree from
 	 * the OF device-tree.
 	 */
-	if (bus->self != NULL)
-		pci_read_bridge_bases(bus);
+	pci_read_bridge_bases(bus);
 
 	/* Now fixup the bus bus */
 	pcibios_setup_bus_self(bus);
@@ -1578,7 +1577,7 @@ fake_pci_bus(struct pci_controller *hose, int busnr)
 {
 	static struct pci_bus bus;
 
-	if (hose == 0) {
+	if (hose == NULL) {
 		printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
 	}
 	bus.number = busnr;
@@ -1674,12 +1673,8 @@ void pcibios_scan_phb(struct pci_controller *hose)
 	/* Configure PCI Express settings */
 	if (bus && !pci_has_flag(PCI_PROBE_ONLY)) {
 		struct pci_bus *child;
-		list_for_each_entry(child, &bus->children, node) {
-			struct pci_dev *self = child->self;
-			if (!self)
-				continue;
-			pcie_bus_configure_settings(child, self->pcie_mpss);
-		}
+		list_for_each_entry(child, &bus->children, node)
+			pcie_bus_configure_settings(child);
 	}
 }
 
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 2e86296..a9e311f 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -109,7 +109,7 @@ int pcibios_unmap_io_space(struct pci_bus *bus)
 	hose = pci_bus_to_host(bus);
 
 	/* Check if we have IOs allocated */
-	if (hose->io_base_alloc == 0)
+	if (hose->io_base_alloc == NULL)
 		return 0;
 
 	pr_debug("IO unmapping for PHB %s\n", hose->dn->full_name);
@@ -272,7 +272,7 @@ static void quirk_radeon_32bit_msi(struct pci_dev *dev)
 	struct pci_dn *pdn = pci_get_pdn(dev);
 
 	if (pdn)
-		pdn->force_32bit_msi = 1;
+		pdn->force_32bit_msi = true;
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x68f2, quirk_radeon_32bit_msi);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0xaa68, quirk_radeon_32bit_msi);
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index df03844..1f61fab 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -47,9 +47,8 @@ struct pci_dn *pci_get_pdn(struct pci_dev *pdev)
 void *update_dn_pci_info(struct device_node *dn, void *data)
 {
 	struct pci_controller *phb = data;
-	const int *type =
-		of_get_property(dn, "ibm,pci-config-space-type", NULL);
-	const u32 *regs;
+	const __be32 *type = of_get_property(dn, "ibm,pci-config-space-type", NULL);
+	const __be32 *regs;
 	struct pci_dn *pdn;
 
 	pdn = zalloc_maybe_bootmem(sizeof(*pdn), GFP_KERNEL);
@@ -63,12 +62,14 @@ void *update_dn_pci_info(struct device_node *dn, void *data)
 #endif
 	regs = of_get_property(dn, "reg", NULL);
 	if (regs) {
+		u32 addr = of_read_number(regs, 1);
+
 		/* First register entry is addr (00BBSS00)  */
-		pdn->busno = (regs[0] >> 16) & 0xff;
-		pdn->devfn = (regs[0] >> 8) & 0xff;
+		pdn->busno = (addr >> 16) & 0xff;
+		pdn->devfn = (addr >> 8) & 0xff;
 	}
 
-	pdn->pci_ext_config_space = (type && *type == 1);
+	pdn->pci_ext_config_space = (type && of_read_number(type, 1) == 1);
 	return NULL;
 }
 
@@ -98,12 +99,13 @@ void *traverse_pci_devices(struct device_node *start, traverse_func pre,
 
 	/* We started with a phb, iterate all childs */
 	for (dn = start->child; dn; dn = nextdn) {
-		const u32 *classp;
-		u32 class;
+		const __be32 *classp;
+		u32 class = 0;
 
 		nextdn = NULL;
 		classp = of_get_property(dn, "class-code", NULL);
-		class = classp ? *classp : 0;
+		if (classp)
+			class = of_read_number(classp, 1);
 
 		if (pre && ((ret = pre(dn, data)) != NULL))
 			return ret;
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index 15d9105..4368ec6 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -24,12 +24,12 @@
  */
 static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
 {
-	const u32 *prop;
+	const __be32 *prop;
 	int len;
 
 	prop = of_get_property(np, name, &len);
 	if (prop && len >= 4)
-		return *prop;
+		return of_read_number(prop, 1);
 	return def;
 }
 
@@ -77,7 +77,7 @@ static void of_pci_parse_addrs(struct device_node *node, struct pci_dev *dev)
 	unsigned int flags;
 	struct pci_bus_region region;
 	struct resource *res;
-	const u32 *addrs;
+	const __be32 *addrs;
 	u32 i;
 	int proplen;
 
@@ -86,14 +86,14 @@ static void of_pci_parse_addrs(struct device_node *node, struct pci_dev *dev)
 		return;
 	pr_debug("    parse addresses (%d bytes) @ %p\n", proplen, addrs);
 	for (; proplen >= 20; proplen -= 20, addrs += 5) {
-		flags = pci_parse_of_flags(addrs[0], 0);
+		flags = pci_parse_of_flags(of_read_number(addrs, 1), 0);
 		if (!flags)
 			continue;
 		base = of_read_number(&addrs[1], 2);
 		size = of_read_number(&addrs[3], 2);
 		if (!size)
 			continue;
-		i = addrs[0] & 0xff;
+		i = of_read_number(addrs, 1) & 0xff;
 		pr_debug("  base: %llx, size: %llx, i: %x\n",
 			 (unsigned long long)base,
 			 (unsigned long long)size, i);
@@ -207,7 +207,7 @@ void of_scan_pci_bridge(struct pci_dev *dev)
 {
 	struct device_node *node = dev->dev.of_node;
 	struct pci_bus *bus;
-	const u32 *busrange, *ranges;
+	const __be32 *busrange, *ranges;
 	int len, i, mode;
 	struct pci_bus_region region;
 	struct resource *res;
@@ -230,9 +230,11 @@ void of_scan_pci_bridge(struct pci_dev *dev)
 		return;
 	}
 
-	bus = pci_find_bus(pci_domain_nr(dev->bus), busrange[0]);
+	bus = pci_find_bus(pci_domain_nr(dev->bus),
+			   of_read_number(busrange, 1));
 	if (!bus) {
-		bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
+		bus = pci_add_new_bus(dev->bus, dev,
+				      of_read_number(busrange, 1));
 		if (!bus) {
 			printk(KERN_ERR "Failed to create pci bus for %s\n",
 			       node->full_name);
@@ -241,7 +243,8 @@ void of_scan_pci_bridge(struct pci_dev *dev)
 	}
 
 	bus->primary = dev->bus->number;
-	pci_bus_insert_busn_res(bus, busrange[0], busrange[1]);
+	pci_bus_insert_busn_res(bus, of_read_number(busrange, 1),
+				of_read_number(busrange+1, 1));
 	bus->bridge_ctl = 0;
 
 	/* parse ranges property */
@@ -254,7 +257,7 @@ void of_scan_pci_bridge(struct pci_dev *dev)
 	}
 	i = 1;
 	for (; len >= 32; len -= 32, ranges += 8) {
-		flags = pci_parse_of_flags(ranges[0], 1);
+		flags = pci_parse_of_flags(of_read_number(ranges, 1), 1);
 		size = of_read_number(&ranges[6], 2);
 		if (flags == 0 || size == 0)
 			continue;
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index c296665..21646db 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -96,7 +96,9 @@ EXPORT_SYMBOL(pci_dram_offset);
 
 EXPORT_SYMBOL(start_thread);
 
+#ifdef CONFIG_PPC_FPU
 EXPORT_SYMBOL(giveup_fpu);
+#endif
 #ifdef CONFIG_ALTIVEC
 EXPORT_SYMBOL(giveup_altivec);
 #endif /* CONFIG_ALTIVEC */
@@ -111,7 +113,6 @@ EXPORT_SYMBOL(giveup_spe);
 #ifndef CONFIG_PPC64
 EXPORT_SYMBOL(flush_instruction_cache);
 #endif
-EXPORT_SYMBOL(__flush_icache_range);
 EXPORT_SYMBOL(flush_dcache_range);
 
 #ifdef CONFIG_SMP
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 8083be2..96d2fdf 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -74,6 +74,7 @@ struct task_struct *last_task_used_vsx = NULL;
 struct task_struct *last_task_used_spe = NULL;
 #endif
 
+#ifdef CONFIG_PPC_FPU
 /*
  * Make sure the floating-point register state in the
  * the thread_struct is up to date for task tsk.
@@ -107,6 +108,7 @@ void flush_fp_to_thread(struct task_struct *tsk)
 	}
 }
 EXPORT_SYMBOL_GPL(flush_fp_to_thread);
+#endif
 
 void enable_kernel_fp(void)
 {
@@ -998,9 +1000,10 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	kregs = (struct pt_regs *) sp;
 	sp -= STACK_FRAME_OVERHEAD;
 	p->thread.ksp = sp;
+#ifdef CONFIG_PPC32
 	p->thread.ksp_limit = (unsigned long)task_stack_page(p) +
 				_ALIGN_UP(sizeof(struct thread_info), 16);
-
+#endif
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 	p->thread.ptrace_bps[0] = NULL;
 #endif
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index eb23ac9..b7634ce 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -215,16 +215,16 @@ static void __init check_cpu_pa_features(unsigned long node)
 #ifdef CONFIG_PPC_STD_MMU_64
 static void __init check_cpu_slb_size(unsigned long node)
 {
-	u32 *slb_size_ptr;
+	__be32 *slb_size_ptr;
 
 	slb_size_ptr = of_get_flat_dt_prop(node, "slb-size", NULL);
 	if (slb_size_ptr != NULL) {
-		mmu_slb_size = *slb_size_ptr;
+		mmu_slb_size = be32_to_cpup(slb_size_ptr);
 		return;
 	}
 	slb_size_ptr = of_get_flat_dt_prop(node, "ibm,slb-size", NULL);
 	if (slb_size_ptr != NULL) {
-		mmu_slb_size = *slb_size_ptr;
+		mmu_slb_size = be32_to_cpup(slb_size_ptr);
 	}
 }
 #else
@@ -279,11 +279,11 @@ static void __init check_cpu_feature_properties(unsigned long node)
 {
 	unsigned long i;
 	struct feature_property *fp = feature_properties;
-	const u32 *prop;
+	const __be32 *prop;
 
 	for (i = 0; i < ARRAY_SIZE(feature_properties); ++i, ++fp) {
 		prop = of_get_flat_dt_prop(node, fp->name, NULL);
-		if (prop && *prop >= fp->min_value) {
+		if (prop && be32_to_cpup(prop) >= fp->min_value) {
 			cur_cpu_spec->cpu_features |= fp->cpu_feature;
 			cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftr;
 		}
@@ -295,8 +295,8 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
 					  void *data)
 {
 	char *type = of_get_flat_dt_prop(node, "device_type", NULL);
-	const u32 *prop;
-	const u32 *intserv;
+	const __be32 *prop;
+	const __be32 *intserv;
 	int i, nthreads;
 	unsigned long len;
 	int found = -1;
@@ -324,8 +324,9 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
 		 * version 2 of the kexec param format adds the phys cpuid of
 		 * booted proc.
 		 */
-		if (initial_boot_params->version >= 2) {
-			if (intserv[i] == initial_boot_params->boot_cpuid_phys) {
+		if (be32_to_cpu(initial_boot_params->version) >= 2) {
+			if (be32_to_cpu(intserv[i]) ==
+			    be32_to_cpu(initial_boot_params->boot_cpuid_phys)) {
 				found = boot_cpu_count;
 				found_thread = i;
 			}
@@ -347,9 +348,10 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
 
 	if (found >= 0) {
 		DBG("boot cpu: logical %d physical %d\n", found,
-			intserv[found_thread]);
+			be32_to_cpu(intserv[found_thread]));
 		boot_cpuid = found;
-		set_hard_smp_processor_id(found, intserv[found_thread]);
+		set_hard_smp_processor_id(found,
+			be32_to_cpu(intserv[found_thread]));
 
 		/*
 		 * PAPR defines "logical" PVR values for cpus that
@@ -366,8 +368,8 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
 		 * it uses 0x0f000001.
 		 */
 		prop = of_get_flat_dt_prop(node, "cpu-version", NULL);
-		if (prop && (*prop & 0xff000000) == 0x0f000000)
-			identify_cpu(0, *prop);
+		if (prop && (be32_to_cpup(prop) & 0xff000000) == 0x0f000000)
+			identify_cpu(0, be32_to_cpup(prop));
 
 		identical_pvr_fixup(node);
 	}
@@ -389,7 +391,7 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
 int __init early_init_dt_scan_chosen_ppc(unsigned long node, const char *uname,
 					 int depth, void *data)
 {
-	unsigned long *lprop;
+	unsigned long *lprop; /* All these set by kernel, so no need to convert endian */
 
 	/* Use common scan routine to determine if this is the chosen node */
 	if (early_init_dt_scan_chosen(node, uname, depth, data) == 0)
@@ -454,7 +456,7 @@ static int __init early_init_dt_scan_drconf_memory(unsigned long node)
 	if (dm == NULL || l < sizeof(__be32))
 		return 0;
 
-	n = *dm++;	/* number of entries */
+	n = of_read_number(dm++, 1);	/* number of entries */
 	if (l < (n * (dt_root_addr_cells + 4) + 1) * sizeof(__be32))
 		return 0;
 
@@ -466,7 +468,7 @@ static int __init early_init_dt_scan_drconf_memory(unsigned long node)
 
 	for (; n != 0; --n) {
 		base = dt_mem_next_cell(dt_root_addr_cells, &dm);
-		flags = dm[3];
+		flags = of_read_number(&dm[3], 1);
 		/* skip DRC index, pad, assoc. list index, flags */
 		dm += 4;
 		/* skip this block if the reserved bit is set in flags (0x80)
@@ -544,14 +546,8 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 	memblock_add(base, size);
 }
 
-void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
-{
-	return __va(memblock_alloc(size, align));
-}
-
 #ifdef CONFIG_BLK_DEV_INITRD
-void __init early_init_dt_setup_initrd_arch(unsigned long start,
-		unsigned long end)
+void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
 {
 	initrd_start = (unsigned long)__va(start);
 	initrd_end = (unsigned long)__va(end);
@@ -591,16 +587,16 @@ static void __init early_reserve_mem_dt(void)
 static void __init early_reserve_mem(void)
 {
 	u64 base, size;
-	u64 *reserve_map;
+	__be64 *reserve_map;
 	unsigned long self_base;
 	unsigned long self_size;
 
-	reserve_map = (u64 *)(((unsigned long)initial_boot_params) +
-					initial_boot_params->off_mem_rsvmap);
+	reserve_map = (__be64 *)(((unsigned long)initial_boot_params) +
+			be32_to_cpu(initial_boot_params->off_mem_rsvmap));
 
 	/* before we do anything, lets reserve the dt blob */
 	self_base = __pa((unsigned long)initial_boot_params);
-	self_size = initial_boot_params->totalsize;
+	self_size = be32_to_cpu(initial_boot_params->totalsize);
 	memblock_reserve(self_base, self_size);
 
 	/* Look for the new "reserved-regions" property in the DT */
@@ -620,15 +616,15 @@ static void __init early_reserve_mem(void)
 	 * Handle the case where we might be booting from an old kexec
 	 * image that setup the mem_rsvmap as pairs of 32-bit values
 	 */
-	if (*reserve_map > 0xffffffffull) {
+	if (be64_to_cpup(reserve_map) > 0xffffffffull) {
 		u32 base_32, size_32;
-		u32 *reserve_map_32 = (u32 *)reserve_map;
+		__be32 *reserve_map_32 = (__be32 *)reserve_map;
 
 		DBG("Found old 32-bit reserve map\n");
 
 		while (1) {
-			base_32 = *(reserve_map_32++);
-			size_32 = *(reserve_map_32++);
+			base_32 = be32_to_cpup(reserve_map_32++);
+			size_32 = be32_to_cpup(reserve_map_32++);
 			if (size_32 == 0)
 				break;
 			/* skip if the reservation is for the blob */
@@ -644,8 +640,8 @@ static void __init early_reserve_mem(void)
 
 	/* Handle the reserve map in the fdt blob if it exists */
 	while (1) {
-		base = *(reserve_map++);
-		size = *(reserve_map++);
+		base = be64_to_cpup(reserve_map++);
+		size = be64_to_cpup(reserve_map++);
 		if (size == 0)
 			break;
 		DBG("reserving: %llx -> %llx\n", base, size);
@@ -795,6 +791,32 @@ struct device_node *of_find_next_cache_node(struct device_node *np)
 	return NULL;
 }
 
+/**
+ * of_get_ibm_chip_id - Returns the IBM "chip-id" of a device
+ * @np: device node of the device
+ *
+ * This looks for a property "ibm,chip-id" in the node or any
+ * of its parents and returns its content, or -1 if it cannot
+ * be found.
+ */
+int of_get_ibm_chip_id(struct device_node *np)
+{
+	of_node_get(np);
+	while(np) {
+		struct device_node *old = np;
+		const __be32 *prop;
+
+		prop = of_get_property(np, "ibm,chip-id", NULL);
+		if (prop) {
+			of_node_put(np);
+			return be32_to_cpup(prop);
+		}
+		np = of_get_parent(np);
+		of_node_put(old);
+	}
+	return -1;
+}
+
 #ifdef CONFIG_PPC_PSERIES
 /*
  * Fix up the uninitialized fields in a new device node:
@@ -865,49 +887,10 @@ static int __init prom_reconfig_setup(void)
 __initcall(prom_reconfig_setup);
 #endif
 
-/* Find the device node for a given logical cpu number, also returns the cpu
- * local thread number (index in ibm,interrupt-server#s) if relevant and
- * asked for (non NULL)
- */
-struct device_node *of_get_cpu_node(int cpu, unsigned int *thread)
+bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
 {
-	int hardid;
-	struct device_node *np;
-
-	hardid = get_hard_smp_processor_id(cpu);
-
-	for_each_node_by_type(np, "cpu") {
-		const u32 *intserv;
-		unsigned int plen, t;
-
-		/* Check for ibm,ppc-interrupt-server#s. If it doesn't exist
-		 * fallback to "reg" property and assume no threads
-		 */
-		intserv = of_get_property(np, "ibm,ppc-interrupt-server#s",
-				&plen);
-		if (intserv == NULL) {
-			const u32 *reg = of_get_property(np, "reg", NULL);
-			if (reg == NULL)
-				continue;
-			if (*reg == hardid) {
-				if (thread)
-					*thread = 0;
-				return np;
-			}
-		} else {
-			plen /= sizeof(u32);
-			for (t = 0; t < plen; t++) {
-				if (hardid == intserv[t]) {
-					if (thread)
-						*thread = t;
-					return np;
-				}
-			}
-		}
-	}
-	return NULL;
+	return (int)phys_id == get_hard_smp_processor_id(cpu);
 }
-EXPORT_SYMBOL(of_get_cpu_node);
 
 #if defined(CONFIG_DEBUG_FS) && defined(DEBUG)
 static struct debugfs_blob_wrapper flat_dt_blob;
@@ -917,7 +900,7 @@ static int __init export_flat_device_tree(void)
 	struct dentry *d;
 
 	flat_dt_blob.data = initial_boot_params;
-	flat_dt_blob.size = initial_boot_params->totalsize;
+	flat_dt_blob.size = be32_to_cpu(initial_boot_params->totalsize);
 
 	d = debugfs_create_blob("flat-device-tree", S_IFREG | S_IRUSR,
 				powerpc_debugfs_root, &flat_dt_blob);
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 6079024..5fe2842 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -107,10 +107,10 @@ int of_workarounds;
 typedef u32 prom_arg_t;
 
 struct prom_args {
-        u32 service;
-        u32 nargs;
-        u32 nret;
-        prom_arg_t args[10];
+        __be32 service;
+        __be32 nargs;
+        __be32 nret;
+        __be32 args[10];
 };
 
 struct prom_t {
@@ -123,11 +123,11 @@ struct prom_t {
 };
 
 struct mem_map_entry {
-	u64	base;
-	u64	size;
+	__be64	base;
+	__be64	size;
 };
 
-typedef u32 cell_t;
+typedef __be32 cell_t;
 
 extern void __start(unsigned long r3, unsigned long r4, unsigned long r5,
 		    unsigned long r6, unsigned long r7, unsigned long r8,
@@ -196,6 +196,8 @@ static int __initdata mem_reserve_cnt;
 
 static cell_t __initdata regbuf[1024];
 
+static bool rtas_has_query_cpu_stopped;
+
 
 /*
  * Error results ... some OF calls will return "-1" on error, some
@@ -219,13 +221,13 @@ static int __init call_prom(const char *service, int nargs, int nret, ...)
 	struct prom_args args;
 	va_list list;
 
-	args.service = ADDR(service);
-	args.nargs = nargs;
-	args.nret = nret;
+	args.service = cpu_to_be32(ADDR(service));
+	args.nargs = cpu_to_be32(nargs);
+	args.nret = cpu_to_be32(nret);
 
 	va_start(list, nret);
 	for (i = 0; i < nargs; i++)
-		args.args[i] = va_arg(list, prom_arg_t);
+		args.args[i] = cpu_to_be32(va_arg(list, prom_arg_t));
 	va_end(list);
 
 	for (i = 0; i < nret; i++)
@@ -234,7 +236,7 @@ static int __init call_prom(const char *service, int nargs, int nret, ...)
 	if (enter_prom(&args, prom_entry) < 0)
 		return PROM_ERROR;
 
-	return (nret > 0) ? args.args[nargs] : 0;
+	return (nret > 0) ? be32_to_cpu(args.args[nargs]) : 0;
 }
 
 static int __init call_prom_ret(const char *service, int nargs, int nret,
@@ -244,13 +246,13 @@ static int __init call_prom_ret(const char *service, int nargs, int nret,
 	struct prom_args args;
 	va_list list;
 
-	args.service = ADDR(service);
-	args.nargs = nargs;
-	args.nret = nret;
+	args.service = cpu_to_be32(ADDR(service));
+	args.nargs = cpu_to_be32(nargs);
+	args.nret = cpu_to_be32(nret);
 
 	va_start(list, rets);
 	for (i = 0; i < nargs; i++)
-		args.args[i] = va_arg(list, prom_arg_t);
+		args.args[i] = cpu_to_be32(va_arg(list, prom_arg_t));
 	va_end(list);
 
 	for (i = 0; i < nret; i++)
@@ -261,9 +263,9 @@ static int __init call_prom_ret(const char *service, int nargs, int nret,
 
 	if (rets != NULL)
 		for (i = 1; i < nret; ++i)
-			rets[i-1] = args.args[nargs+i];
+			rets[i-1] = be32_to_cpu(args.args[nargs+i]);
 
-	return (nret > 0) ? args.args[nargs] : 0;
+	return (nret > 0) ? be32_to_cpu(args.args[nargs]) : 0;
 }
 
 
@@ -527,7 +529,7 @@ static int __init prom_setprop(phandle node, const char *nodename,
 #define islower(c)	('a' <= (c) && (c) <= 'z')
 #define toupper(c)	(islower(c) ? ((c) - 'a' + 'A') : (c))
 
-unsigned long prom_strtoul(const char *cp, const char **endp)
+static unsigned long prom_strtoul(const char *cp, const char **endp)
 {
 	unsigned long result = 0, base = 10, value;
 
@@ -552,7 +554,7 @@ unsigned long prom_strtoul(const char *cp, const char **endp)
 	return result;
 }
 
-unsigned long prom_memparse(const char *ptr, const char **retptr)
+static unsigned long prom_memparse(const char *ptr, const char **retptr)
 {
 	unsigned long ret = prom_strtoul(ptr, retptr);
 	int shift = 0;
@@ -724,7 +726,8 @@ unsigned char ibm_architecture_vec[] = {
 
 };
 
-/* Old method - ELF header with PT_NOTE sections */
+/* Old method - ELF header with PT_NOTE sections only works on BE */
+#ifdef __BIG_ENDIAN__
 static struct fake_elf {
 	Elf32_Ehdr	elfhdr;
 	Elf32_Phdr	phdr[2];
@@ -810,6 +813,7 @@ static struct fake_elf {
 		}
 	}
 };
+#endif /* __BIG_ENDIAN__ */
 
 static int __init prom_count_smt_threads(void)
 {
@@ -852,9 +856,9 @@ static int __init prom_count_smt_threads(void)
 
 static void __init prom_send_capabilities(void)
 {
-	ihandle elfloader, root;
+	ihandle root;
 	prom_arg_t ret;
-	u32 *cores;
+	__be32 *cores;
 
 	root = call_prom("open", 1, 1, ADDR("/"));
 	if (root != 0) {
@@ -864,15 +868,15 @@ static void __init prom_send_capabilities(void)
 		 * (we assume this is the same for all cores) and use it to
 		 * divide NR_CPUS.
 		 */
-		cores = (u32 *)&ibm_architecture_vec[IBM_ARCH_VEC_NRCORES_OFFSET];
-		if (*cores != NR_CPUS) {
+		cores = (__be32 *)&ibm_architecture_vec[IBM_ARCH_VEC_NRCORES_OFFSET];
+		if (be32_to_cpup(cores) != NR_CPUS) {
 			prom_printf("WARNING ! "
 				    "ibm_architecture_vec structure inconsistent: %lu!\n",
-				    *cores);
+				    be32_to_cpup(cores));
 		} else {
-			*cores = DIV_ROUND_UP(NR_CPUS, prom_count_smt_threads());
+			*cores = cpu_to_be32(DIV_ROUND_UP(NR_CPUS, prom_count_smt_threads()));
 			prom_printf("Max number of cores passed to firmware: %lu (NR_CPUS = %lu)\n",
-				    *cores, NR_CPUS);
+				    be32_to_cpup(cores), NR_CPUS);
 		}
 
 		/* try calling the ibm,client-architecture-support method */
@@ -893,17 +897,24 @@ static void __init prom_send_capabilities(void)
 		prom_printf(" not implemented\n");
 	}
 
-	/* no ibm,client-architecture-support call, try the old way */
-	elfloader = call_prom("open", 1, 1, ADDR("/packages/elf-loader"));
-	if (elfloader == 0) {
-		prom_printf("couldn't open /packages/elf-loader\n");
-		return;
+#ifdef __BIG_ENDIAN__
+	{
+		ihandle elfloader;
+
+		/* no ibm,client-architecture-support call, try the old way */
+		elfloader = call_prom("open", 1, 1,
+				      ADDR("/packages/elf-loader"));
+		if (elfloader == 0) {
+			prom_printf("couldn't open /packages/elf-loader\n");
+			return;
+		}
+		call_prom("call-method", 3, 1, ADDR("process-elf-header"),
+			  elfloader, ADDR(&fake_elf));
+		call_prom("close", 1, 0, elfloader);
 	}
-	call_prom("call-method", 3, 1, ADDR("process-elf-header"),
-			elfloader, ADDR(&fake_elf));
-	call_prom("close", 1, 0, elfloader);
+#endif /* __BIG_ENDIAN__ */
 }
-#endif
+#endif /* #if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */
 
 /*
  * Memory allocation strategy... our layout is normally:
@@ -1050,11 +1061,11 @@ static unsigned long __init prom_next_cell(int s, cell_t **cellp)
 		p++;
 		s--;
 	}
-	r = *p++;
+	r = be32_to_cpu(*p++);
 #ifdef CONFIG_PPC64
 	if (s > 1) {
 		r <<= 32;
-		r |= *(p++);
+		r |= be32_to_cpu(*(p++));
 	}
 #endif
 	*cellp = p;
@@ -1087,8 +1098,8 @@ static void __init reserve_mem(u64 base, u64 size)
 
 	if (cnt >= (MEM_RESERVE_MAP_SIZE - 1))
 		prom_panic("Memory reserve map exhausted !\n");
-	mem_reserve_map[cnt].base = base;
-	mem_reserve_map[cnt].size = size;
+	mem_reserve_map[cnt].base = cpu_to_be64(base);
+	mem_reserve_map[cnt].size = cpu_to_be64(size);
 	mem_reserve_cnt = cnt + 1;
 }
 
@@ -1102,6 +1113,7 @@ static void __init prom_init_mem(void)
 	char *path, type[64];
 	unsigned int plen;
 	cell_t *p, *endp;
+	__be32 val;
 	u32 rac, rsc;
 
 	/*
@@ -1109,12 +1121,14 @@ static void __init prom_init_mem(void)
 	 * 1) top of RMO (first node)
 	 * 2) top of memory
 	 */
-	rac = 2;
-	prom_getprop(prom.root, "#address-cells", &rac, sizeof(rac));
-	rsc = 1;
-	prom_getprop(prom.root, "#size-cells", &rsc, sizeof(rsc));
-	prom_debug("root_addr_cells: %x\n", (unsigned long) rac);
-	prom_debug("root_size_cells: %x\n", (unsigned long) rsc);
+	val = cpu_to_be32(2);
+	prom_getprop(prom.root, "#address-cells", &val, sizeof(val));
+	rac = be32_to_cpu(val);
+	val = cpu_to_be32(1);
+	prom_getprop(prom.root, "#size-cells", &val, sizeof(rsc));
+	rsc = be32_to_cpu(val);
+	prom_debug("root_addr_cells: %x\n", rac);
+	prom_debug("root_size_cells: %x\n", rsc);
 
 	prom_debug("scanning memory:\n");
 	path = prom_scratch;
@@ -1222,25 +1236,23 @@ static void __init prom_init_mem(void)
 
 static void __init prom_close_stdin(void)
 {
-	ihandle val;
+	__be32 val;
+	ihandle stdin;
 
-	if (prom_getprop(prom.chosen, "stdin", &val, sizeof(val)) > 0)
-		call_prom("close", 1, 0, val);
+	if (prom_getprop(prom.chosen, "stdin", &val, sizeof(val)) > 0) {
+		stdin = be32_to_cpu(val);
+		call_prom("close", 1, 0, stdin);
+	}
 }
 
 #ifdef CONFIG_PPC_POWERNV
 
-static u64 __initdata prom_opal_size;
-static u64 __initdata prom_opal_align;
-static int __initdata prom_rtas_start_cpu;
-static u64 __initdata prom_rtas_data;
-static u64 __initdata prom_rtas_entry;
-
 #ifdef CONFIG_PPC_EARLY_DEBUG_OPAL
 static u64 __initdata prom_opal_base;
 static u64 __initdata prom_opal_entry;
 #endif
 
+#ifdef __BIG_ENDIAN__
 /* XXX Don't change this structure without updating opal-takeover.S */
 static struct opal_secondary_data {
 	s64				ack;	/*  0 */
@@ -1248,6 +1260,12 @@ static struct opal_secondary_data {
 	struct opal_takeover_args	args;	/* 16 */
 } opal_secondary_data;
 
+static u64 __initdata prom_opal_align;
+static u64 __initdata prom_opal_size;
+static int __initdata prom_rtas_start_cpu;
+static u64 __initdata prom_rtas_data;
+static u64 __initdata prom_rtas_entry;
+
 extern char opal_secondary_entry;
 
 static void __init prom_query_opal(void)
@@ -1265,6 +1283,7 @@ static void __init prom_query_opal(void)
 	}
 
 	prom_printf("Querying for OPAL presence... ");
+
 	rc = opal_query_takeover(&prom_opal_size,
 				 &prom_opal_align);
 	prom_debug("(rc = %ld) ", rc);
@@ -1280,7 +1299,8 @@ static void __init prom_query_opal(void)
 		prom_opal_align = 0x10000;
 }
 
-static int prom_rtas_call(int token, int nargs, int nret, int *outputs, ...)
+static int __init prom_rtas_call(int token, int nargs, int nret,
+				 int *outputs, ...)
 {
 	struct rtas_args rtas_args;
 	va_list list;
@@ -1425,6 +1445,7 @@ static void __init prom_opal_takeover(void)
 	for (;;)
 		opal_do_takeover(args);
 }
+#endif /* __BIG_ENDIAN__ */
 
 /*
  * Allocate room for and instantiate OPAL
@@ -1435,6 +1456,7 @@ static void __init prom_instantiate_opal(void)
 	ihandle opal_inst;
 	u64 base, entry;
 	u64 size = 0, align = 0x10000;
+	__be64 val64;
 	u32 rets[2];
 
 	prom_debug("prom_instantiate_opal: start...\n");
@@ -1444,11 +1466,14 @@ static void __init prom_instantiate_opal(void)
 	if (!PHANDLE_VALID(opal_node))
 		return;
 
-	prom_getprop(opal_node, "opal-runtime-size", &size, sizeof(size));
+	val64 = 0;
+	prom_getprop(opal_node, "opal-runtime-size", &val64, sizeof(val64));
+	size = be64_to_cpu(val64);
 	if (size == 0)
 		return;
-	prom_getprop(opal_node, "opal-runtime-alignment", &align,
-		     sizeof(align));
+	val64 = 0;
+	prom_getprop(opal_node, "opal-runtime-alignment", &val64,sizeof(val64));
+	align = be64_to_cpu(val64);
 
 	base = alloc_down(size, align, 0);
 	if (base == 0) {
@@ -1505,6 +1530,7 @@ static void __init prom_instantiate_rtas(void)
 	phandle rtas_node;
 	ihandle rtas_inst;
 	u32 base, entry = 0;
+	__be32 val;
 	u32 size = 0;
 
 	prom_debug("prom_instantiate_rtas: start...\n");
@@ -1514,7 +1540,9 @@ static void __init prom_instantiate_rtas(void)
 	if (!PHANDLE_VALID(rtas_node))
 		return;
 
-	prom_getprop(rtas_node, "rtas-size", &size, sizeof(size));
+	val = 0;
+	prom_getprop(rtas_node, "rtas-size", &val, sizeof(size));
+	size = be32_to_cpu(val);
 	if (size == 0)
 		return;
 
@@ -1541,12 +1569,19 @@ static void __init prom_instantiate_rtas(void)
 
 	reserve_mem(base, size);
 
+	val = cpu_to_be32(base);
 	prom_setprop(rtas_node, "/rtas", "linux,rtas-base",
-		     &base, sizeof(base));
+		     &val, sizeof(val));
+	val = cpu_to_be32(entry);
 	prom_setprop(rtas_node, "/rtas", "linux,rtas-entry",
-		     &entry, sizeof(entry));
+		     &val, sizeof(val));
 
-#ifdef CONFIG_PPC_POWERNV
+	/* Check if it supports "query-cpu-stopped-state" */
+	if (prom_getprop(rtas_node, "query-cpu-stopped-state",
+			 &val, sizeof(val)) != PROM_ERROR)
+		rtas_has_query_cpu_stopped = true;
+
+#if defined(CONFIG_PPC_POWERNV) && defined(__BIG_ENDIAN__)
 	/* PowerVN takeover hack */
 	prom_rtas_data = base;
 	prom_rtas_entry = entry;
@@ -1620,6 +1655,7 @@ static void __init prom_instantiate_sml(void)
 /*
  * Allocate room for and initialize TCE tables
  */
+#ifdef __BIG_ENDIAN__
 static void __init prom_initialize_tce_table(void)
 {
 	phandle node;
@@ -1748,7 +1784,8 @@ static void __init prom_initialize_tce_table(void)
 	/* Flag the first invalid entry */
 	prom_debug("ending prom_initialize_tce_table\n");
 }
-#endif
+#endif /* __BIG_ENDIAN__ */
+#endif /* CONFIG_PPC64 */
 
 /*
  * With CHRP SMP we need to use the OF to start the other processors.
@@ -1777,7 +1814,6 @@ static void __init prom_initialize_tce_table(void)
 static void __init prom_hold_cpus(void)
 {
 	unsigned long i;
-	unsigned int reg;
 	phandle node;
 	char type[64];
 	unsigned long *spinloop
@@ -1786,6 +1822,18 @@ static void __init prom_hold_cpus(void)
 		= (void *) LOW_ADDR(__secondary_hold_acknowledge);
 	unsigned long secondary_hold = LOW_ADDR(__secondary_hold);
 
+	/*
+	 * On pseries, if RTAS supports "query-cpu-stopped-state",
+	 * we skip this stage, the CPUs will be started by the
+	 * kernel using RTAS.
+	 */
+	if ((of_platform == PLATFORM_PSERIES ||
+	     of_platform == PLATFORM_PSERIES_LPAR) &&
+	    rtas_has_query_cpu_stopped) {
+		prom_printf("prom_hold_cpus: skipped\n");
+		return;
+	}
+
 	prom_debug("prom_hold_cpus: start...\n");
 	prom_debug("    1) spinloop       = 0x%x\n", (unsigned long)spinloop);
 	prom_debug("    1) *spinloop      = 0x%x\n", *spinloop);
@@ -1803,6 +1851,9 @@ static void __init prom_hold_cpus(void)
 
 	/* look for cpus */
 	for (node = 0; prom_next_node(&node); ) {
+		unsigned int cpu_no;
+		__be32 reg;
+
 		type[0] = 0;
 		prom_getprop(node, "device_type", type, sizeof(type));
 		if (strcmp(type, "cpu") != 0)
@@ -1813,10 +1864,11 @@ static void __init prom_hold_cpus(void)
 			if (strcmp(type, "okay") != 0)
 				continue;
 
-		reg = -1;
+		reg = cpu_to_be32(-1); /* make sparse happy */
 		prom_getprop(node, "reg", &reg, sizeof(reg));
+		cpu_no = be32_to_cpu(reg);
 
-		prom_debug("cpu hw idx   = %lu\n", reg);
+		prom_debug("cpu hw idx   = %lu\n", cpu_no);
 
 		/* Init the acknowledge var which will be reset by
 		 * the secondary cpu when it awakens from its OF
@@ -1824,24 +1876,24 @@ static void __init prom_hold_cpus(void)
 		 */
 		*acknowledge = (unsigned long)-1;
 
-		if (reg != prom.cpu) {
+		if (cpu_no != prom.cpu) {
 			/* Primary Thread of non-boot cpu or any thread */
-			prom_printf("starting cpu hw idx %lu... ", reg);
+			prom_printf("starting cpu hw idx %lu... ", cpu_no);
 			call_prom("start-cpu", 3, 0, node,
-				  secondary_hold, reg);
+				  secondary_hold, cpu_no);
 
 			for (i = 0; (i < 100000000) && 
 			     (*acknowledge == ((unsigned long)-1)); i++ )
 				mb();
 
-			if (*acknowledge == reg)
+			if (*acknowledge == cpu_no)
 				prom_printf("done\n");
 			else
 				prom_printf("failed: %x\n", *acknowledge);
 		}
 #ifdef CONFIG_SMP
 		else
-			prom_printf("boot cpu hw idx %lu\n", reg);
+			prom_printf("boot cpu hw idx %lu\n", cpu_no);
 #endif /* CONFIG_SMP */
 	}
 
@@ -1895,6 +1947,7 @@ static void __init prom_find_mmu(void)
 	prom.memory = call_prom("open", 1, 1, ADDR("/memory"));
 	prom_getprop(prom.chosen, "mmu", &prom.mmumap,
 		     sizeof(prom.mmumap));
+	prom.mmumap = be32_to_cpu(prom.mmumap);
 	if (!IHANDLE_VALID(prom.memory) || !IHANDLE_VALID(prom.mmumap))
 		of_workarounds &= ~OF_WA_CLAIM;		/* hmmm */
 }
@@ -1906,17 +1959,19 @@ static void __init prom_init_stdout(void)
 {
 	char *path = of_stdout_device;
 	char type[16];
-	u32 val;
+	phandle stdout_node;
+	__be32 val;
 
 	if (prom_getprop(prom.chosen, "stdout", &val, sizeof(val)) <= 0)
 		prom_panic("cannot find stdout");
 
-	prom.stdout = val;
+	prom.stdout = be32_to_cpu(val);
 
 	/* Get the full OF pathname of the stdout device */
 	memset(path, 0, 256);
 	call_prom("instance-to-path", 3, 1, prom.stdout, path, 255);
-	val = call_prom("instance-to-package", 1, 1, prom.stdout);
+	stdout_node = call_prom("instance-to-package", 1, 1, prom.stdout);
+	val = cpu_to_be32(stdout_node);
 	prom_setprop(prom.chosen, "/chosen", "linux,stdout-package",
 		     &val, sizeof(val));
 	prom_printf("OF stdout device is: %s\n", of_stdout_device);
@@ -1925,9 +1980,9 @@ static void __init prom_init_stdout(void)
 
 	/* If it's a display, note it */
 	memset(type, 0, sizeof(type));
-	prom_getprop(val, "device_type", type, sizeof(type));
+	prom_getprop(stdout_node, "device_type", type, sizeof(type));
 	if (strcmp(type, "display") == 0)
-		prom_setprop(val, path, "linux,boot-display", NULL, 0);
+		prom_setprop(stdout_node, path, "linux,boot-display", NULL, 0);
 }
 
 static int __init prom_find_machine_type(void)
@@ -2082,6 +2137,22 @@ static void __init prom_check_displays(void)
 					   clut[2]) != 0)
 				break;
 #endif /* CONFIG_LOGO_LINUX_CLUT224 */
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_BOOTX
+		if (prom_getprop(node, "linux,boot-display", NULL, 0) !=
+		    PROM_ERROR) {
+			u32 width, height, pitch, addr;
+
+			prom_printf("Setting btext !\n");
+			prom_getprop(node, "width", &width, 4);
+			prom_getprop(node, "height", &height, 4);
+			prom_getprop(node, "linebytes", &pitch, 4);
+			prom_getprop(node, "address", &addr, 4);
+			prom_printf("W=%d H=%d LB=%d addr=0x%x\n",
+				    width, height, pitch, addr);
+			btext_setup_display(width, height, 8, pitch, addr);
+		}
+#endif /* CONFIG_PPC_EARLY_DEBUG_BOOTX */
 	}
 }
 
@@ -2117,8 +2188,10 @@ static void __init *make_room(unsigned long *mem_start, unsigned long *mem_end,
 	return ret;
 }
 
-#define dt_push_token(token, mem_start, mem_end) \
-	do { *((u32 *)make_room(mem_start, mem_end, 4, 4)) = token; } while(0)
+#define dt_push_token(token, mem_start, mem_end) do { 			\
+		void *room = make_room(mem_start, mem_end, 4, 4);	\
+		*(__be32 *)room = cpu_to_be32(token);			\
+	} while(0)
 
 static unsigned long __init dt_find_string(char *str)
 {
@@ -2291,7 +2364,7 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start,
 			dt_push_token(4, mem_start, mem_end);
 			dt_push_token(soff, mem_start, mem_end);
 			valp = make_room(mem_start, mem_end, 4, 4);
-			*(u32 *)valp = node;
+			*(__be32 *)valp = cpu_to_be32(node);
 		}
 	}
 
@@ -2364,16 +2437,16 @@ static void __init flatten_device_tree(void)
 	dt_struct_end = PAGE_ALIGN(mem_start);
 
 	/* Finish header */
-	hdr->boot_cpuid_phys = prom.cpu;
-	hdr->magic = OF_DT_HEADER;
-	hdr->totalsize = dt_struct_end - dt_header_start;
-	hdr->off_dt_struct = dt_struct_start - dt_header_start;
-	hdr->off_dt_strings = dt_string_start - dt_header_start;
-	hdr->dt_strings_size = dt_string_end - dt_string_start;
-	hdr->off_mem_rsvmap = ((unsigned long)rsvmap) - dt_header_start;
-	hdr->version = OF_DT_VERSION;
+	hdr->boot_cpuid_phys = cpu_to_be32(prom.cpu);
+	hdr->magic = cpu_to_be32(OF_DT_HEADER);
+	hdr->totalsize = cpu_to_be32(dt_struct_end - dt_header_start);
+	hdr->off_dt_struct = cpu_to_be32(dt_struct_start - dt_header_start);
+	hdr->off_dt_strings = cpu_to_be32(dt_string_start - dt_header_start);
+	hdr->dt_strings_size = cpu_to_be32(dt_string_end - dt_string_start);
+	hdr->off_mem_rsvmap = cpu_to_be32(((unsigned long)rsvmap) - dt_header_start);
+	hdr->version = cpu_to_be32(OF_DT_VERSION);
 	/* Version 16 is not backward compatible */
-	hdr->last_comp_version = 0x10;
+	hdr->last_comp_version = cpu_to_be32(0x10);
 
 	/* Copy the reserve map in */
 	memcpy(rsvmap, mem_reserve_map, sizeof(mem_reserve_map));
@@ -2384,8 +2457,8 @@ static void __init flatten_device_tree(void)
 		prom_printf("reserved memory map:\n");
 		for (i = 0; i < mem_reserve_cnt; i++)
 			prom_printf("  %x - %x\n",
-				    mem_reserve_map[i].base,
-				    mem_reserve_map[i].size);
+				    be64_to_cpu(mem_reserve_map[i].base),
+				    be64_to_cpu(mem_reserve_map[i].size));
 	}
 #endif
 	/* Bump mem_reserve_cnt to cause further reservations to fail
@@ -2397,7 +2470,6 @@ static void __init flatten_device_tree(void)
 		    dt_string_start, dt_string_end);
 	prom_printf("Device tree struct  0x%x -> 0x%x\n",
 		    dt_struct_start, dt_struct_end);
-
 }
 
 #ifdef CONFIG_PPC_MAPLE
@@ -2730,18 +2802,19 @@ static void __init fixup_device_tree(void)
 
 static void __init prom_find_boot_cpu(void)
 {
-	u32 getprop_rval;
+	__be32 rval;
 	ihandle prom_cpu;
 	phandle cpu_pkg;
 
-	prom.cpu = 0;
-	if (prom_getprop(prom.chosen, "cpu", &prom_cpu, sizeof(prom_cpu)) <= 0)
+	rval = 0;
+	if (prom_getprop(prom.chosen, "cpu", &rval, sizeof(rval)) <= 0)
 		return;
+	prom_cpu = be32_to_cpu(rval);
 
 	cpu_pkg = call_prom("instance-to-package", 1, 1, prom_cpu);
 
-	prom_getprop(cpu_pkg, "reg", &getprop_rval, sizeof(getprop_rval));
-	prom.cpu = getprop_rval;
+	prom_getprop(cpu_pkg, "reg", &rval, sizeof(rval));
+	prom.cpu = be32_to_cpu(rval);
 
 	prom_debug("Booting CPU hw index = %lu\n", prom.cpu);
 }
@@ -2750,15 +2823,15 @@ static void __init prom_check_initrd(unsigned long r3, unsigned long r4)
 {
 #ifdef CONFIG_BLK_DEV_INITRD
 	if (r3 && r4 && r4 != 0xdeadbeef) {
-		unsigned long val;
+		__be64 val;
 
 		prom_initrd_start = is_kernel_addr(r3) ? __pa(r3) : r3;
 		prom_initrd_end = prom_initrd_start + r4;
 
-		val = prom_initrd_start;
+		val = cpu_to_be64(prom_initrd_start);
 		prom_setprop(prom.chosen, "/chosen", "linux,initrd-start",
 			     &val, sizeof(val));
-		val = prom_initrd_end;
+		val = cpu_to_be64(prom_initrd_end);
 		prom_setprop(prom.chosen, "/chosen", "linux,initrd-end",
 			     &val, sizeof(val));
 
@@ -2915,7 +2988,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	 */
 	prom_check_displays();
 
-#ifdef CONFIG_PPC64
+#if defined(CONFIG_PPC64) && defined(__BIG_ENDIAN__)
 	/*
 	 * Initialize IOMMU (TCE tables) on pSeries. Do that before anything else
 	 * that uses the allocator, we need to make sure we get the top of memory
@@ -2934,6 +3007,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 		prom_instantiate_rtas();
 
 #ifdef CONFIG_PPC_POWERNV
+#ifdef __BIG_ENDIAN__
 	/* Detect HAL and try instanciating it & doing takeover */
 	if (of_platform == PLATFORM_PSERIES_LPAR) {
 		prom_query_opal();
@@ -2941,9 +3015,11 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 			prom_opal_hold_cpus();
 			prom_opal_takeover();
 		}
-	} else if (of_platform == PLATFORM_OPAL)
+	} else
+#endif /* __BIG_ENDIAN__ */
+	if (of_platform == PLATFORM_OPAL)
 		prom_instantiate_opal();
-#endif
+#endif /* CONFIG_PPC_POWERNV */
 
 #ifdef CONFIG_PPC64
 	/* instantiate sml */
@@ -2954,6 +3030,8 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	 * On non-powermacs, put all CPUs in spin-loops.
 	 *
 	 * PowerMacs use a different mechanism to spin CPUs
+	 *
+	 * (This must be done after instanciating RTAS)
 	 */
 	if (of_platform != PLATFORM_POWERMAC &&
 	    of_platform != PLATFORM_OPAL)
@@ -2962,10 +3040,11 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	/*
 	 * Fill in some infos for use by the kernel later on
 	 */
-	if (prom_memory_limit)
+	if (prom_memory_limit) {
+		__be64 val = cpu_to_be64(prom_memory_limit);
 		prom_setprop(prom.chosen, "/chosen", "linux,memory-limit",
-			     &prom_memory_limit,
-			     sizeof(prom_memory_limit));
+			     &val, sizeof(val));
+	}
 #ifdef CONFIG_PPC64
 	if (prom_iommu_off)
 		prom_setprop(prom.chosen, "/chosen", "linux,iommu-off",
diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh
index 3765da6..b0c263d 100644
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -22,7 +22,8 @@ __secondary_hold_acknowledge __secondary_hold_spinloop __start
 strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224
 reloc_got2 kernstart_addr memstart_addr linux_banner _stext
 opal_query_takeover opal_do_takeover opal_enter_rtas opal_secondary_entry
-boot_command_line __prom_init_toc_start __prom_init_toc_end"
+boot_command_line __prom_init_toc_start __prom_init_toc_end
+btext_setup_display"
 
 NM="$1"
 OBJ="$2"
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 4e1331b..6295e64 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -7,28 +7,27 @@
 #include <linux/of_address.h>
 #include <asm/prom.h>
 
-void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
-		unsigned long *busno, unsigned long *phys, unsigned long *size)
+void of_parse_dma_window(struct device_node *dn, const __be32 *dma_window,
+			 unsigned long *busno, unsigned long *phys,
+			 unsigned long *size)
 {
-	const u32 *dma_window;
 	u32 cells;
-	const unsigned char *prop;
-
-	dma_window = dma_window_prop;
+	const __be32 *prop;
 
 	/* busno is always one cell */
-	*busno = *(dma_window++);
+	*busno = of_read_number(dma_window, 1);
+	dma_window++;
 
 	prop = of_get_property(dn, "ibm,#dma-address-cells", NULL);
 	if (!prop)
 		prop = of_get_property(dn, "#address-cells", NULL);
 
-	cells = prop ? *(u32 *)prop : of_n_addr_cells(dn);
+	cells = prop ? of_read_number(prop, 1) : of_n_addr_cells(dn);
 	*phys = of_read_number(dma_window, cells);
 
 	dma_window += cells;
 
 	prop = of_get_property(dn, "ibm,#dma-size-cells", NULL);
-	cells = prop ? *(u32 *)prop : of_n_size_cells(dn);
+	cells = prop ? of_read_number(prop, 1) : of_n_size_cells(dn);
 	*size = of_read_number(dma_window, cells);
 }
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 80b5ef4..4cf674d 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -91,7 +91,7 @@ static void unlock_rtas(unsigned long flags)
  * are designed only for very early low-level debugging, which
  * is why the token is hard-coded to 10.
  */
-static void call_rtas_display_status(char c)
+static void call_rtas_display_status(unsigned char c)
 {
 	struct rtas_args *args = &rtas.args;
 	unsigned long s;
@@ -100,11 +100,11 @@ static void call_rtas_display_status(char c)
 		return;
 	s = lock_rtas();
 
-	args->token = 10;
-	args->nargs = 1;
-	args->nret  = 1;
-	args->rets  = (rtas_arg_t *)&(args->args[1]);
-	args->args[0] = (unsigned char)c;
+	args->token = cpu_to_be32(10);
+	args->nargs = cpu_to_be32(1);
+	args->nret  = cpu_to_be32(1);
+	args->rets  = &(args->args[1]);
+	args->args[0] = cpu_to_be32(c);
 
 	enter_rtas(__pa(args));
 
@@ -204,7 +204,7 @@ void rtas_progress(char *s, unsigned short hex)
 {
 	struct device_node *root;
 	int width;
-	const int *p;
+	const __be32 *p;
 	char *os;
 	static int display_character, set_indicator;
 	static int display_width, display_lines, form_feed;
@@ -221,13 +221,13 @@ void rtas_progress(char *s, unsigned short hex)
 		if ((root = of_find_node_by_path("/rtas"))) {
 			if ((p = of_get_property(root,
 					"ibm,display-line-length", NULL)))
-				display_width = *p;
+				display_width = be32_to_cpu(*p);
 			if ((p = of_get_property(root,
 					"ibm,form-feed", NULL)))
-				form_feed = *p;
+				form_feed = be32_to_cpu(*p);
 			if ((p = of_get_property(root,
 					"ibm,display-number-of-lines", NULL)))
-				display_lines = *p;
+				display_lines = be32_to_cpu(*p);
 			row_width = of_get_property(root,
 					"ibm,display-truncation-length", NULL);
 			of_node_put(root);
@@ -322,11 +322,11 @@ EXPORT_SYMBOL(rtas_progress);		/* needed by rtas_flash module */
 
 int rtas_token(const char *service)
 {
-	const int *tokp;
+	const __be32 *tokp;
 	if (rtas.dev == NULL)
 		return RTAS_UNKNOWN_SERVICE;
 	tokp = of_get_property(rtas.dev, service, NULL);
-	return tokp ? *tokp : RTAS_UNKNOWN_SERVICE;
+	return tokp ? be32_to_cpu(*tokp) : RTAS_UNKNOWN_SERVICE;
 }
 EXPORT_SYMBOL(rtas_token);
 
@@ -380,11 +380,11 @@ static char *__fetch_rtas_last_error(char *altbuf)
 
 	bufsz = rtas_get_error_log_max();
 
-	err_args.token = rtas_last_error_token;
-	err_args.nargs = 2;
-	err_args.nret = 1;
-	err_args.args[0] = (rtas_arg_t)__pa(rtas_err_buf);
-	err_args.args[1] = bufsz;
+	err_args.token = cpu_to_be32(rtas_last_error_token);
+	err_args.nargs = cpu_to_be32(2);
+	err_args.nret = cpu_to_be32(1);
+	err_args.args[0] = cpu_to_be32(__pa(rtas_err_buf));
+	err_args.args[1] = cpu_to_be32(bufsz);
 	err_args.args[2] = 0;
 
 	save_args = rtas.args;
@@ -433,13 +433,13 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...)
 	s = lock_rtas();
 	rtas_args = &rtas.args;
 
-	rtas_args->token = token;
-	rtas_args->nargs = nargs;
-	rtas_args->nret  = nret;
-	rtas_args->rets  = (rtas_arg_t *)&(rtas_args->args[nargs]);
+	rtas_args->token = cpu_to_be32(token);
+	rtas_args->nargs = cpu_to_be32(nargs);
+	rtas_args->nret  = cpu_to_be32(nret);
+	rtas_args->rets  = &(rtas_args->args[nargs]);
 	va_start(list, outputs);
 	for (i = 0; i < nargs; ++i)
-		rtas_args->args[i] = va_arg(list, rtas_arg_t);
+		rtas_args->args[i] = cpu_to_be32(va_arg(list, __u32));
 	va_end(list);
 
 	for (i = 0; i < nret; ++i)
@@ -449,13 +449,13 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...)
 
 	/* A -1 return code indicates that the last command couldn't
 	   be completed due to a hardware error. */
-	if (rtas_args->rets[0] == -1)
+	if (be32_to_cpu(rtas_args->rets[0]) == -1)
 		buff_copy = __fetch_rtas_last_error(NULL);
 
 	if (nret > 1 && outputs != NULL)
 		for (i = 0; i < nret-1; ++i)
-			outputs[i] = rtas_args->rets[i+1];
-	ret = (nret > 0)? rtas_args->rets[0]: 0;
+			outputs[i] = be32_to_cpu(rtas_args->rets[i+1]);
+	ret = (nret > 0)? be32_to_cpu(rtas_args->rets[0]): 0;
 
 	unlock_rtas(s);
 
@@ -588,8 +588,8 @@ bool rtas_indicator_present(int token, int *maxindex)
 {
 	int proplen, count, i;
 	const struct indicator_elem {
-		u32 token;
-		u32 maxindex;
+		__be32 token;
+		__be32 maxindex;
 	} *indicators;
 
 	indicators = of_get_property(rtas.dev, "rtas-indicators", &proplen);
@@ -599,10 +599,10 @@ bool rtas_indicator_present(int token, int *maxindex)
 	count = proplen / sizeof(struct indicator_elem);
 
 	for (i = 0; i < count; i++) {
-		if (indicators[i].token != token)
+		if (__be32_to_cpu(indicators[i].token) != token)
 			continue;
 		if (maxindex)
-			*maxindex = indicators[i].maxindex;
+			*maxindex = __be32_to_cpu(indicators[i].maxindex);
 		return true;
 	}
 
@@ -1097,19 +1097,19 @@ void __init rtas_initialize(void)
 	 */
 	rtas.dev = of_find_node_by_name(NULL, "rtas");
 	if (rtas.dev) {
-		const u32 *basep, *entryp, *sizep;
+		const __be32 *basep, *entryp, *sizep;
 
 		basep = of_get_property(rtas.dev, "linux,rtas-base", NULL);
 		sizep = of_get_property(rtas.dev, "rtas-size", NULL);
 		if (basep != NULL && sizep != NULL) {
-			rtas.base = *basep;
-			rtas.size = *sizep;
+			rtas.base = __be32_to_cpu(*basep);
+			rtas.size = __be32_to_cpu(*sizep);
 			entryp = of_get_property(rtas.dev,
 					"linux,rtas-entry", NULL);
 			if (entryp == NULL) /* Ugh */
 				rtas.entry = rtas.base;
 			else
-				rtas.entry = *entryp;
+				rtas.entry = __be32_to_cpu(*entryp);
 		} else
 			rtas.dev = NULL;
 	}
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 63d051f..3d261c0 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -436,7 +436,8 @@ void __init smp_setup_cpu_maps(void)
 	DBG("smp_setup_cpu_maps()\n");
 
 	while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < nr_cpu_ids) {
-		const int *intserv;
+		const __be32 *intserv;
+		__be32 cpu_be;
 		int j, len;
 
 		DBG("  * %s...\n", dn->full_name);
@@ -450,15 +451,17 @@ void __init smp_setup_cpu_maps(void)
 		} else {
 			DBG("    no ibm,ppc-interrupt-server#s -> 1 thread\n");
 			intserv = of_get_property(dn, "reg", NULL);
-			if (!intserv)
-				intserv = &cpu;	/* assume logical == phys */
+			if (!intserv) {
+				cpu_be = cpu_to_be32(cpu);
+				intserv = &cpu_be;	/* assume logical == phys */
+			}
 		}
 
 		for (j = 0; j < nthreads && cpu < nr_cpu_ids; j++) {
 			DBG("    thread %d -> cpu %d (hard id %d)\n",
-			    j, cpu, intserv[j]);
+			    j, cpu, be32_to_cpu(intserv[j]));
 			set_cpu_present(cpu, true);
-			set_hard_smp_processor_id(cpu, intserv[j]);
+			set_hard_smp_processor_id(cpu, be32_to_cpu(intserv[j]));
 			set_cpu_possible(cpu, true);
 			cpu++;
 		}
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index a8f54ec..a4bbcae 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -38,6 +38,7 @@
 #include <asm/serial.h>
 #include <asm/udbg.h>
 #include <asm/mmu_context.h>
+#include <asm/epapr_hcalls.h>
 
 #include "setup.h"
 
@@ -128,6 +129,8 @@ notrace void __init machine_init(u64 dt_ptr)
 	/* Do some early initialization based on the flat device tree */
 	early_init_devtree(__va(dt_ptr));
 
+	epapr_paravirt_early_init();
+
 	early_init_mmu();
 
 	probe_machine();
@@ -326,5 +329,4 @@ void __init setup_arch(char **cmdline_p)
 
 	/* Initialize the MMU context management stuff */
 	mmu_context_init();
-
 }
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 389fb807..278ca93 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -10,7 +10,7 @@
  *      2 of the License, or (at your option) any later version.
  */
 
-#undef DEBUG
+#define DEBUG
 
 #include <linux/export.h>
 #include <linux/string.h>
@@ -66,6 +66,7 @@
 #include <asm/code-patching.h>
 #include <asm/kvm_ppc.h>
 #include <asm/hugetlb.h>
+#include <asm/epapr_hcalls.h>
 
 #include "setup.h"
 
@@ -215,6 +216,8 @@ void __init early_setup(unsigned long dt_ptr)
 	 */
 	early_init_devtree(__va(dt_ptr));
 
+	epapr_paravirt_early_init();
+
 	/* Now we know the logical id of our boot cpu, setup the paca. */
 	setup_paca(&paca[boot_cpuid]);
 	fixup_boot_paca();
@@ -229,6 +232,8 @@ void __init early_setup(unsigned long dt_ptr)
 	/* Initialize the hash table or TLB handling */
 	early_init_mmu();
 
+	kvm_cma_reserve();
+
 	/*
 	 * Reserve any gigantic pages requested on the command line.
 	 * memblock needs to have been initialized by the time this is
@@ -237,6 +242,18 @@ void __init early_setup(unsigned long dt_ptr)
 	reserve_hugetlb_gpages();
 
 	DBG(" <- early_setup()\n");
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_BOOTX
+	/*
+	 * This needs to be done *last* (after the above DBG() even)
+	 *
+	 * Right after we return from this function, we turn on the MMU
+	 * which means the real-mode access trick that btext does will
+	 * no longer work, it needs to switch to using a real MMU
+	 * mapping. This call will ensure that it does
+	 */
+	btext_map();
+#endif /* CONFIG_PPC_EARLY_DEBUG_BOOTX */
 }
 
 #ifdef CONFIG_SMP
@@ -305,14 +322,14 @@ static void __init initialize_cache_info(void)
 		 * d-cache and i-cache sizes... -Peter
 		 */
 		if (num_cpus == 1) {
-			const u32 *sizep, *lsizep;
+			const __be32 *sizep, *lsizep;
 			u32 size, lsize;
 
 			size = 0;
 			lsize = cur_cpu_spec->dcache_bsize;
 			sizep = of_get_property(np, "d-cache-size", NULL);
 			if (sizep != NULL)
-				size = *sizep;
+				size = be32_to_cpu(*sizep);
 			lsizep = of_get_property(np, "d-cache-block-size",
 						 NULL);
 			/* fallback if block size missing */
@@ -321,8 +338,8 @@ static void __init initialize_cache_info(void)
 							 "d-cache-line-size",
 							 NULL);
 			if (lsizep != NULL)
-				lsize = *lsizep;
-			if (sizep == 0 || lsizep == 0)
+				lsize = be32_to_cpu(*lsizep);
+			if (sizep == NULL || lsizep == NULL)
 				DBG("Argh, can't find dcache properties ! "
 				    "sizep: %p, lsizep: %p\n", sizep, lsizep);
 
@@ -335,7 +352,7 @@ static void __init initialize_cache_info(void)
 			lsize = cur_cpu_spec->icache_bsize;
 			sizep = of_get_property(np, "i-cache-size", NULL);
 			if (sizep != NULL)
-				size = *sizep;
+				size = be32_to_cpu(*sizep);
 			lsizep = of_get_property(np, "i-cache-block-size",
 						 NULL);
 			if (lsizep == NULL)
@@ -343,8 +360,8 @@ static void __init initialize_cache_info(void)
 							 "i-cache-line-size",
 							 NULL);
 			if (lsizep != NULL)
-				lsize = *lsizep;
-			if (sizep == 0 || lsizep == 0)
+				lsize = be32_to_cpu(*lsizep);
+			if (sizep == NULL || lsizep == NULL)
 				DBG("Argh, can't find icache properties ! "
 				    "sizep: %p, lsizep: %p\n", sizep, lsizep);
 
@@ -609,8 +626,6 @@ void __init setup_arch(char **cmdline_p)
 	/* Initialize the MMU context management stuff */
 	mmu_context_init();
 
-	kvm_linear_init();
-
 	/* Interrupt code needs to be 64K-aligned */
 	if ((unsigned long)_stext & 0xffff)
 		panic("Kernelbase not 64K-aligned (0x%lx)!\n",
@@ -701,8 +716,7 @@ void __init setup_per_cpu_areas(void)
 #endif
 
 
-#ifdef CONFIG_PPC_INDIRECT_IO
+#if defined(CONFIG_PPC_INDIRECT_PIO) || defined(CONFIG_PPC_INDIRECT_MMIO)
 struct ppc_pci_io ppc_pci_io;
 EXPORT_SYMBOL(ppc_pci_io);
-#endif /* CONFIG_PPC_INDIRECT_IO */
-
+#endif
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index 0f83122..bebdf1a 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -436,7 +436,10 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
 	 * use altivec. Since VSCR only contains 32 bits saved in the least
 	 * significant bits of a vector, we "cheat" and stuff VRSAVE in the
 	 * most significant bits of that same vector. --BenH
+	 * Note that the current VRSAVE value is in the SPR at this point.
 	 */
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+		current->thread.vrsave = mfspr(SPRN_VRSAVE);
 	if (__put_user(current->thread.vrsave, (u32 __user *)&frame->mc_vregs[32]))
 		return 1;
 #endif /* CONFIG_ALTIVEC */
@@ -557,6 +560,8 @@ static int save_tm_user_regs(struct pt_regs *regs,
 	 * significant bits of a vector, we "cheat" and stuff VRSAVE in the
 	 * most significant bits of that same vector. --BenH
 	 */
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+		current->thread.vrsave = mfspr(SPRN_VRSAVE);
 	if (__put_user(current->thread.vrsave,
 		       (u32 __user *)&frame->mc_vregs[32]))
 		return 1;
@@ -696,6 +701,8 @@ static long restore_user_regs(struct pt_regs *regs,
 	/* Always get VRSAVE back */
 	if (__get_user(current->thread.vrsave, (u32 __user *)&sr->mc_vregs[32]))
 		return 1;
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+		mtspr(SPRN_VRSAVE, current->thread.vrsave);
 #endif /* CONFIG_ALTIVEC */
 	if (copy_fpr_from_user(current, &sr->mc_fregs))
 		return 1;
@@ -809,6 +816,8 @@ static long restore_tm_user_regs(struct pt_regs *regs,
 	    __get_user(current->thread.transact_vrsave,
 		       (u32 __user *)&tm_sr->mc_vregs[32]))
 		return 1;
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+		mtspr(SPRN_VRSAVE, current->thread.vrsave);
 #endif /* CONFIG_ALTIVEC */
 
 	regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1);
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index 887e99d..f93ec28 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -96,8 +96,6 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 	unsigned long msr = regs->msr;
 	long err = 0;
 
-	flush_fp_to_thread(current);
-
 #ifdef CONFIG_ALTIVEC
 	err |= __put_user(v_regs, &sc->v_regs);
 
@@ -114,6 +112,8 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 	/* We always copy to/from vrsave, it's 0 if we don't have or don't
 	 * use altivec.
 	 */
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+		current->thread.vrsave = mfspr(SPRN_VRSAVE);
 	err |= __put_user(current->thread.vrsave, (u32 __user *)&v_regs[33]);
 #else /* CONFIG_ALTIVEC */
 	err |= __put_user(0, &sc->v_regs);
@@ -217,6 +217,8 @@ static long setup_tm_sigcontexts(struct sigcontext __user *sc,
 	/* We always copy to/from vrsave, it's 0 if we don't have or don't
 	 * use altivec.
 	 */
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+		current->thread.vrsave = mfspr(SPRN_VRSAVE);
 	err |= __put_user(current->thread.vrsave, (u32 __user *)&v_regs[33]);
 	if (msr & MSR_VEC)
 		err |= __put_user(current->thread.transact_vrsave,
@@ -346,16 +348,18 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig,
 	if (v_regs && !access_ok(VERIFY_READ, v_regs, 34 * sizeof(vector128)))
 		return -EFAULT;
 	/* Copy 33 vec registers (vr0..31 and vscr) from the stack */
-	if (v_regs != 0 && (msr & MSR_VEC) != 0)
+	if (v_regs != NULL && (msr & MSR_VEC) != 0)
 		err |= __copy_from_user(current->thread.vr, v_regs,
 					33 * sizeof(vector128));
 	else if (current->thread.used_vr)
 		memset(current->thread.vr, 0, 33 * sizeof(vector128));
 	/* Always get VRSAVE back */
-	if (v_regs != 0)
+	if (v_regs != NULL)
 		err |= __get_user(current->thread.vrsave, (u32 __user *)&v_regs[33]);
 	else
 		current->thread.vrsave = 0;
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+		mtspr(SPRN_VRSAVE, current->thread.vrsave);
 #endif /* CONFIG_ALTIVEC */
 	/* restore floating point */
 	err |= copy_fpr_from_user(current, &sc->fp_regs);
@@ -463,7 +467,7 @@ static long restore_tm_sigcontexts(struct pt_regs *regs,
 				    tm_v_regs, 34 * sizeof(vector128)))
 		return -EFAULT;
 	/* Copy 33 vec registers (vr0..31 and vscr) from the stack */
-	if (v_regs != 0 && tm_v_regs != 0 && (msr & MSR_VEC) != 0) {
+	if (v_regs != NULL && tm_v_regs != NULL && (msr & MSR_VEC) != 0) {
 		err |= __copy_from_user(current->thread.vr, v_regs,
 					33 * sizeof(vector128));
 		err |= __copy_from_user(current->thread.transact_vr, tm_v_regs,
@@ -474,7 +478,7 @@ static long restore_tm_sigcontexts(struct pt_regs *regs,
 		memset(current->thread.transact_vr, 0, 33 * sizeof(vector128));
 	}
 	/* Always get VRSAVE back */
-	if (v_regs != 0 && tm_v_regs != 0) {
+	if (v_regs != NULL && tm_v_regs != NULL) {
 		err |= __get_user(current->thread.vrsave,
 				  (u32 __user *)&v_regs[33]);
 		err |= __get_user(current->thread.transact_vrsave,
@@ -484,6 +488,8 @@ static long restore_tm_sigcontexts(struct pt_regs *regs,
 		current->thread.vrsave = 0;
 		current->thread.transact_vrsave = 0;
 	}
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+		mtspr(SPRN_VRSAVE, current->thread.vrsave);
 #endif /* CONFIG_ALTIVEC */
 	/* restore floating point */
 	err |= copy_fpr_from_user(current, &sc->fp_regs);
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 38b0ba6..8e59abc 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -81,6 +81,28 @@ int smt_enabled_at_boot = 1;
 
 static void (*crash_ipi_function_ptr)(struct pt_regs *) = NULL;
 
+/*
+ * Returns 1 if the specified cpu should be brought up during boot.
+ * Used to inhibit booting threads if they've been disabled or
+ * limited on the command line
+ */
+int smp_generic_cpu_bootable(unsigned int nr)
+{
+	/* Special case - we inhibit secondary thread startup
+	 * during boot if the user requests it.
+	 */
+	if (system_state == SYSTEM_BOOTING && cpu_has_feature(CPU_FTR_SMT)) {
+		if (!smt_enabled_at_boot && cpu_thread_in_core(nr) != 0)
+			return 0;
+		if (smt_enabled_at_boot
+		    && cpu_thread_in_core(nr) >= smt_enabled_at_boot)
+			return 0;
+	}
+
+	return 1;
+}
+
+
 #ifdef CONFIG_PPC64
 int smp_generic_kick_cpu(int nr)
 {
@@ -172,7 +194,7 @@ int smp_request_message_ipi(int virq, int msg)
 #endif
 	err = request_irq(virq, smp_ipi_action[msg],
 			  IRQF_PERCPU | IRQF_NO_THREAD | IRQF_NO_SUSPEND,
-			  smp_ipi_name[msg], 0);
+			  smp_ipi_name[msg], NULL);
 	WARN(err < 0, "unable to request_irq %d for %s (rc %d)\n",
 		virq, smp_ipi_name[msg], err);
 
@@ -210,6 +232,12 @@ void smp_muxed_ipi_message_pass(int cpu, int msg)
 	smp_ops->cause_ipi(cpu, info->data);
 }
 
+#ifdef __BIG_ENDIAN__
+#define IPI_MESSAGE(A) (1 << (24 - 8 * (A)))
+#else
+#define IPI_MESSAGE(A) (1 << (8 * (A)))
+#endif
+
 irqreturn_t smp_ipi_demux(void)
 {
 	struct cpu_messages *info = &__get_cpu_var(ipi_message);
@@ -219,19 +247,14 @@ irqreturn_t smp_ipi_demux(void)
 
 	do {
 		all = xchg(&info->messages, 0);
-
-#ifdef __BIG_ENDIAN
-		if (all & (1 << (24 - 8 * PPC_MSG_CALL_FUNCTION)))
+		if (all & IPI_MESSAGE(PPC_MSG_CALL_FUNCTION))
 			generic_smp_call_function_interrupt();
-		if (all & (1 << (24 - 8 * PPC_MSG_RESCHEDULE)))
+		if (all & IPI_MESSAGE(PPC_MSG_RESCHEDULE))
 			scheduler_ipi();
-		if (all & (1 << (24 - 8 * PPC_MSG_CALL_FUNC_SINGLE)))
+		if (all & IPI_MESSAGE(PPC_MSG_CALL_FUNC_SINGLE))
 			generic_smp_call_function_single_interrupt();
-		if (all & (1 << (24 - 8 * PPC_MSG_DEBUGGER_BREAK)))
+		if (all & IPI_MESSAGE(PPC_MSG_DEBUGGER_BREAK))
 			debug_ipi_action(0, NULL);
-#else
-#error Unsupported ENDIAN
-#endif
 	} while (info->messages);
 
 	return IRQ_HANDLED;
@@ -574,6 +597,22 @@ out:
 	return id;
 }
 
+/* Return the value of the chip-id property corresponding
+ * to the given logical cpu.
+ */
+int cpu_to_chip_id(int cpu)
+{
+	struct device_node *np;
+
+	np = of_get_cpu_node(cpu, NULL);
+	if (!np)
+		return -1;
+
+	of_node_put(np);
+	return of_get_ibm_chip_id(np);
+}
+EXPORT_SYMBOL(cpu_to_chip_id);
+
 /* Helper routines for cpu to core mapping */
 int cpu_core_index_of_thread(int cpu)
 {
@@ -587,6 +626,33 @@ int cpu_first_thread_of_core(int core)
 }
 EXPORT_SYMBOL_GPL(cpu_first_thread_of_core);
 
+static void traverse_siblings_chip_id(int cpu, bool add, int chipid)
+{
+	const struct cpumask *mask;
+	struct device_node *np;
+	int i, plen;
+	const __be32 *prop;
+
+	mask = add ? cpu_online_mask : cpu_present_mask;
+	for_each_cpu(i, mask) {
+		np = of_get_cpu_node(i, NULL);
+		if (!np)
+			continue;
+		prop = of_get_property(np, "ibm,chip-id", &plen);
+		if (prop && plen == sizeof(int) &&
+		    of_read_number(prop, 1) == chipid) {
+			if (add) {
+				cpumask_set_cpu(cpu, cpu_core_mask(i));
+				cpumask_set_cpu(i, cpu_core_mask(cpu));
+			} else {
+				cpumask_clear_cpu(cpu, cpu_core_mask(i));
+				cpumask_clear_cpu(i, cpu_core_mask(cpu));
+			}
+		}
+		of_node_put(np);
+	}
+}
+
 /* Must be called when no change can occur to cpu_present_mask,
  * i.e. during cpu online or offline.
  */
@@ -609,11 +675,51 @@ static struct device_node *cpu_to_l2cache(int cpu)
 	return cache;
 }
 
+static void traverse_core_siblings(int cpu, bool add)
+{
+	struct device_node *l2_cache, *np;
+	const struct cpumask *mask;
+	int i, chip, plen;
+	const __be32 *prop;
+
+	/* First see if we have ibm,chip-id properties in cpu nodes */
+	np = of_get_cpu_node(cpu, NULL);
+	if (np) {
+		chip = -1;
+		prop = of_get_property(np, "ibm,chip-id", &plen);
+		if (prop && plen == sizeof(int))
+			chip = of_read_number(prop, 1);
+		of_node_put(np);
+		if (chip >= 0) {
+			traverse_siblings_chip_id(cpu, add, chip);
+			return;
+		}
+	}
+
+	l2_cache = cpu_to_l2cache(cpu);
+	mask = add ? cpu_online_mask : cpu_present_mask;
+	for_each_cpu(i, mask) {
+		np = cpu_to_l2cache(i);
+		if (!np)
+			continue;
+		if (np == l2_cache) {
+			if (add) {
+				cpumask_set_cpu(cpu, cpu_core_mask(i));
+				cpumask_set_cpu(i, cpu_core_mask(cpu));
+			} else {
+				cpumask_clear_cpu(cpu, cpu_core_mask(i));
+				cpumask_clear_cpu(i, cpu_core_mask(cpu));
+			}
+		}
+		of_node_put(np);
+	}
+	of_node_put(l2_cache);
+}
+
 /* Activate a secondary processor. */
 void start_secondary(void *unused)
 {
 	unsigned int cpu = smp_processor_id();
-	struct device_node *l2_cache;
 	int i, base;
 
 	atomic_inc(&init_mm.mm_count);
@@ -652,18 +758,7 @@ void start_secondary(void *unused)
 		cpumask_set_cpu(cpu, cpu_core_mask(base + i));
 		cpumask_set_cpu(base + i, cpu_core_mask(cpu));
 	}
-	l2_cache = cpu_to_l2cache(cpu);
-	for_each_online_cpu(i) {
-		struct device_node *np = cpu_to_l2cache(i);
-		if (!np)
-			continue;
-		if (np == l2_cache) {
-			cpumask_set_cpu(cpu, cpu_core_mask(i));
-			cpumask_set_cpu(i, cpu_core_mask(cpu));
-		}
-		of_node_put(np);
-	}
-	of_node_put(l2_cache);
+	traverse_core_siblings(cpu, true);
 
 	smp_wmb();
 	notify_cpu_starting(cpu);
@@ -719,7 +814,6 @@ int arch_sd_sibling_asym_packing(void)
 #ifdef CONFIG_HOTPLUG_CPU
 int __cpu_disable(void)
 {
-	struct device_node *l2_cache;
 	int cpu = smp_processor_id();
 	int base, i;
 	int err;
@@ -739,20 +833,7 @@ int __cpu_disable(void)
 		cpumask_clear_cpu(cpu, cpu_core_mask(base + i));
 		cpumask_clear_cpu(base + i, cpu_core_mask(cpu));
 	}
-
-	l2_cache = cpu_to_l2cache(cpu);
-	for_each_present_cpu(i) {
-		struct device_node *np = cpu_to_l2cache(i);
-		if (!np)
-			continue;
-		if (np == l2_cache) {
-			cpumask_clear_cpu(cpu, cpu_core_mask(i));
-			cpumask_clear_cpu(i, cpu_core_mask(cpu));
-		}
-		of_node_put(np);
-	}
-	of_node_put(l2_cache);
-
+	traverse_core_siblings(cpu, false);
 
 	return 0;
 }
diff --git a/arch/powerpc/kernel/softemu8xx.c b/arch/powerpc/kernel/softemu8xx.c
deleted file mode 100644
index 29b2f81..0000000
--- a/arch/powerpc/kernel/softemu8xx.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * Software emulation of some PPC instructions for the 8xx core.
- *
- * Copyright (C) 1998 Dan Malek (dmalek@jlc.net)
- *
- * Software floating emuation for the MPC8xx processor.  I did this mostly
- * because it was easier than trying to get the libraries compiled for
- * software floating point.  The goal is still to get the libraries done,
- * but I lost patience and needed some hacks to at least get init and
- * shells running.  The first problem is the setjmp/longjmp that save
- * and restore the floating point registers.
- *
- * For this emulation, our working registers are found on the register
- * save area.
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/interrupt.h>
-
-#include <asm/pgtable.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-
-/* Eventually we may need a look-up table, but this works for now.
-*/
-#define LFS	48
-#define LFD	50
-#define LFDU	51
-#define STFD	54
-#define STFDU	55
-#define FMR	63
-
-void print_8xx_pte(struct mm_struct *mm, unsigned long addr)
-{
-	pgd_t *pgd;
-	pmd_t *pmd;
-	pte_t *pte;
-
-	printk(" pte @ 0x%8lx: ", addr);
-	pgd = pgd_offset(mm, addr & PAGE_MASK);
-	if (pgd) {
-		pmd = pmd_offset(pud_offset(pgd, addr & PAGE_MASK),
-		                 addr & PAGE_MASK);
-		if (pmd && pmd_present(*pmd)) {
-			pte = pte_offset_kernel(pmd, addr & PAGE_MASK);
-			if (pte) {
-				printk(" (0x%08lx)->(0x%08lx)->0x%08lx\n",
-				        (long)pgd, (long)pte, (long)pte_val(*pte));
-#define pp ((long)pte_val(*pte))
-				printk(" RPN: %05lx PP: %lx SPS: %lx SH: %lx "
-				       "CI: %lx v: %lx\n",
-				       pp>>12,    /* rpn */
-				       (pp>>10)&3, /* pp */
-				       (pp>>3)&1, /* small */
-				       (pp>>2)&1, /* shared */
-				       (pp>>1)&1, /* cache inhibit */
-				       pp&1       /* valid */
-				       );
-#undef pp
-			}
-			else {
-				printk("no pte\n");
-			}
-		}
-		else {
-			printk("no pmd\n");
-		}
-	}
-	else {
-		printk("no pgd\n");
-	}
-}
-
-int get_8xx_pte(struct mm_struct *mm, unsigned long addr)
-{
-	pgd_t *pgd;
-	pmd_t *pmd;
-	pte_t *pte;
-	int retval = 0;
-
-	pgd = pgd_offset(mm, addr & PAGE_MASK);
-	if (pgd) {
-		pmd = pmd_offset(pud_offset(pgd, addr & PAGE_MASK),
-		                 addr & PAGE_MASK);
-		if (pmd && pmd_present(*pmd)) {
-			pte = pte_offset_kernel(pmd, addr & PAGE_MASK);
-			if (pte) {
-				retval = (int)pte_val(*pte);
-			}
-		}
-	}
-	return retval;
-}
-
-/*
- * We return 0 on success, 1 on unimplemented instruction, and EFAULT
- * if a load/store faulted.
- */
-int Soft_emulate_8xx(struct pt_regs *regs)
-{
-	u32 inst, instword;
-	u32 flreg, idxreg, disp;
-	int retval;
-	s16 sdisp;
-	u32 *ea, *ip;
-
-	retval = 0;
-
-	instword = *((u32 *)regs->nip);
-	inst = instword >> 26;
-
-	flreg = (instword >> 21) & 0x1f;
-	idxreg = (instword >> 16) & 0x1f;
-	disp = instword & 0xffff;
-
-	ea = (u32 *)(regs->gpr[idxreg] + disp);
-	ip = (u32 *)&current->thread.TS_FPR(flreg);
-
-	switch ( inst )
-	{
-	case LFD:
-		/* this is a 16 bit quantity that is sign extended
-		 * so use a signed short here -- Cort
-		 */
-		sdisp = (instword & 0xffff);
-		ea = (u32 *)(regs->gpr[idxreg] + sdisp);
-		if (copy_from_user(ip, ea, sizeof(double)))
-			retval = -EFAULT;
-		break;
-
-	case LFDU:
-		if (copy_from_user(ip, ea, sizeof(double)))
-			retval = -EFAULT;
-		else
-			regs->gpr[idxreg] = (u32)ea;
-		break;
-	case LFS:
-		sdisp = (instword & 0xffff);
-		ea = (u32 *)(regs->gpr[idxreg] + sdisp);
-		if (copy_from_user(ip, ea, sizeof(float)))
-			retval = -EFAULT;
-		break;
-	case STFD:
-		/* this is a 16 bit quantity that is sign extended
-		 * so use a signed short here -- Cort
-		 */
-		sdisp = (instword & 0xffff);
-		ea = (u32 *)(regs->gpr[idxreg] + sdisp);
-		if (copy_to_user(ea, ip, sizeof(double)))
-			retval = -EFAULT;
-		break;
-
-	case STFDU:
-		if (copy_to_user(ea, ip, sizeof(double)))
-			retval = -EFAULT;
-		else
-			regs->gpr[idxreg] = (u32)ea;
-		break;
-	case FMR:
-		/* assume this is a fp move -- Cort */
-		memcpy(ip, &current->thread.TS_FPR((instword>>11)&0x1f),
-		       sizeof(double));
-		break;
-	default:
-		retval = 1;
-		printk("Bad emulation %s/%d\n"
-		       " NIP: %08lx instruction: %08x opcode: %x "
-		       "A: %x B: %x C: %x code: %x rc: %x\n",
-		       current->comm,current->pid,
-		       regs->nip,
-		       instword,inst,
-		       (instword>>16)&0x1f,
-		       (instword>>11)&0x1f,
-		       (instword>>6)&0x1f,
-		       (instword>>1)&0x3ff,
-		       instword&1);
-		{
-			int pa;
-			print_8xx_pte(current->mm,regs->nip);
-			pa = get_8xx_pte(current->mm,regs->nip) & PAGE_MASK;
-			pa |= (regs->nip & ~PAGE_MASK);
-			pa = (unsigned long)__va(pa);
-			printk("Kernel VA for NIP %x ", pa);
-			print_8xx_pte(current->mm,pa);
-		}
-	}
-
-	if (retval == 0)
-		regs->nip += 4;
-
-	return retval;
-}
diff --git a/arch/powerpc/kernel/swsusp_asm64.S b/arch/powerpc/kernel/swsusp_asm64.S
index 86ac1d9..2204598 100644
--- a/arch/powerpc/kernel/swsusp_asm64.S
+++ b/arch/powerpc/kernel/swsusp_asm64.S
@@ -46,10 +46,19 @@
 #define SL_r29		0xe8
 #define SL_r30		0xf0
 #define SL_r31		0xf8
-#define SL_SIZE		SL_r31+8
+#define SL_SPRG1	0x100
+#define SL_TCR		0x108
+#define SL_SIZE		SL_TCR+8
 
 /* these macros rely on the save area being
  * pointed to by r11 */
+
+#define SAVE_SPR(register)		\
+	mfspr	r0, SPRN_##register	;\
+	std	r0, SL_##register(r11)
+#define RESTORE_SPR(register)		\
+	ld	r0, SL_##register(r11)	;\
+	mtspr	SPRN_##register, r0
 #define SAVE_SPECIAL(special)		\
 	mf##special	r0		;\
 	std	r0, SL_##special(r11)
@@ -103,8 +112,15 @@ _GLOBAL(swsusp_arch_suspend)
 	SAVE_REGISTER(r30)
 	SAVE_REGISTER(r31)
 	SAVE_SPECIAL(MSR)
-	SAVE_SPECIAL(SDR1)
 	SAVE_SPECIAL(XER)
+#ifdef CONFIG_PPC_BOOK3S_64
+	SAVE_SPECIAL(SDR1)
+#else
+	SAVE_SPR(TCR)
+
+	/* Save SPRG1, SPRG1 be used save paca */
+	SAVE_SPR(SPRG1)
+#endif
 
 	/* we push the stack up 128 bytes but don't store the
 	 * stack pointer on the stack like a real stackframe */
@@ -151,6 +167,7 @@ copy_page_loop:
 	bne+	copyloop
 nothing_to_copy:
 
+#ifdef CONFIG_PPC_BOOK3S_64
 	/* flush caches */
 	lis	r3, 0x10
 	mtctr	r3
@@ -167,6 +184,7 @@ nothing_to_copy:
 	sync
 
 	tlbia
+#endif
 
 	ld	r11,swsusp_save_area_ptr@toc(r2)
 
@@ -208,16 +226,39 @@ nothing_to_copy:
 	RESTORE_REGISTER(r29)
 	RESTORE_REGISTER(r30)
 	RESTORE_REGISTER(r31)
+
+#ifdef CONFIG_PPC_BOOK3S_64
 	/* can't use RESTORE_SPECIAL(MSR) */
 	ld	r0, SL_MSR(r11)
 	mtmsrd	r0, 0
 	RESTORE_SPECIAL(SDR1)
+#else
+	/* Restore SPRG1, be used to save paca */
+	ld	r0, SL_SPRG1(r11)
+	mtsprg	1, r0
+
+	RESTORE_SPECIAL(MSR)
+
+	/* Restore TCR and clear any pending bits in TSR. */
+	RESTORE_SPR(TCR)
+	lis	r0, (TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS)@h
+	mtspr	SPRN_TSR, r0
+
+	/* Kick decrementer */
+	li	r0, 1
+	mtdec	r0
+
+	/* Invalidate all tlbs */
+	bl	_tlbil_all
+#endif
 	RESTORE_SPECIAL(XER)
 
 	sync
 
 	addi	r1,r1,-128
+#ifdef CONFIG_PPC_BOOK3S_64
 	bl	slb_flush_and_rebolt
+#endif
 	bl	do_after_copyback
 	addi	r1,r1,128
 
diff --git a/arch/powerpc/kernel/swsusp_booke.S b/arch/powerpc/kernel/swsusp_booke.S
index 11a3930..0f20405 100644
--- a/arch/powerpc/kernel/swsusp_booke.S
+++ b/arch/powerpc/kernel/swsusp_booke.S
@@ -141,6 +141,14 @@ _GLOBAL(swsusp_arch_resume)
 	lis	r11,swsusp_save_area@h
 	ori	r11,r11,swsusp_save_area@l
 
+	/*
+	 * Mappings from virtual addresses to physical addresses may be
+	 * different than they were prior to restoring hibernation state. 
+	 * Invalidate the TLB so that the boot CPU is using the new
+	 * mappings.
+	 */
+	bl	_tlbil_all
+
 	lwz	r4,SL_SPRG0(r11)
 	mtsprg	0,r4
 	lwz	r4,SL_SPRG1(r11)
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index 27a90b9..b4e6676 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -17,6 +17,7 @@
 #include <asm/machdep.h>
 #include <asm/smp.h>
 #include <asm/pmc.h>
+#include <asm/firmware.h>
 
 #include "cacheinfo.h"
 
@@ -179,15 +180,25 @@ SYSFS_PMCSETUP(spurr, SPRN_SPURR);
 SYSFS_PMCSETUP(dscr, SPRN_DSCR);
 SYSFS_PMCSETUP(pir, SPRN_PIR);
 
+/*
+  Lets only enable read for phyp resources and
+  enable write when needed with a separate function.
+  Lets be conservative and default to pseries.
+*/
 static DEVICE_ATTR(mmcra, 0600, show_mmcra, store_mmcra);
 static DEVICE_ATTR(spurr, 0400, show_spurr, NULL);
 static DEVICE_ATTR(dscr, 0600, show_dscr, store_dscr);
-static DEVICE_ATTR(purr, 0600, show_purr, store_purr);
+static DEVICE_ATTR(purr, 0400, show_purr, store_purr);
 static DEVICE_ATTR(pir, 0400, show_pir, NULL);
 
 unsigned long dscr_default = 0;
 EXPORT_SYMBOL(dscr_default);
 
+static void add_write_permission_dev_attr(struct device_attribute *attr)
+{
+	attr->attr.mode |= 0200;
+}
+
 static ssize_t show_dscr_default(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
@@ -394,8 +405,11 @@ static void register_cpu_online(unsigned int cpu)
 	if (cpu_has_feature(CPU_FTR_MMCRA))
 		device_create_file(s, &dev_attr_mmcra);
 
-	if (cpu_has_feature(CPU_FTR_PURR))
+	if (cpu_has_feature(CPU_FTR_PURR)) {
+		if (!firmware_has_feature(FW_FEATURE_LPAR))
+			add_write_permission_dev_attr(&dev_attr_purr);
 		device_create_file(s, &dev_attr_purr);
+	}
 
 	if (cpu_has_feature(CPU_FTR_SPURR))
 		device_create_file(s, &dev_attr_spurr);
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 65ab9e9..192b051 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -210,18 +210,18 @@ static u64 scan_dispatch_log(u64 stop_tb)
 	if (!dtl)
 		return 0;
 
-	if (i == vpa->dtl_idx)
+	if (i == be64_to_cpu(vpa->dtl_idx))
 		return 0;
-	while (i < vpa->dtl_idx) {
+	while (i < be64_to_cpu(vpa->dtl_idx)) {
 		if (dtl_consumer)
 			dtl_consumer(dtl, i);
-		dtb = dtl->timebase;
-		tb_delta = dtl->enqueue_to_dispatch_time +
-			dtl->ready_to_enqueue_time;
+		dtb = be64_to_cpu(dtl->timebase);
+		tb_delta = be32_to_cpu(dtl->enqueue_to_dispatch_time) +
+			be32_to_cpu(dtl->ready_to_enqueue_time);
 		barrier();
-		if (i + N_DISPATCH_LOG < vpa->dtl_idx) {
+		if (i + N_DISPATCH_LOG < be64_to_cpu(vpa->dtl_idx)) {
 			/* buffer has overflowed */
-			i = vpa->dtl_idx - N_DISPATCH_LOG;
+			i = be64_to_cpu(vpa->dtl_idx) - N_DISPATCH_LOG;
 			dtl = local_paca->dispatch_log + (i % N_DISPATCH_LOG);
 			continue;
 		}
@@ -269,7 +269,7 @@ static inline u64 calculate_stolen_time(u64 stop_tb)
 {
 	u64 stolen = 0;
 
-	if (get_paca()->dtl_ridx != get_paca()->lppaca_ptr->dtl_idx) {
+	if (get_paca()->dtl_ridx != be64_to_cpu(get_lppaca()->dtl_idx)) {
 		stolen = scan_dispatch_log(stop_tb);
 		get_paca()->system_time -= stolen;
 	}
@@ -612,7 +612,7 @@ unsigned long long sched_clock(void)
 static int __init get_freq(char *name, int cells, unsigned long *val)
 {
 	struct device_node *cpu;
-	const unsigned int *fp;
+	const __be32 *fp;
 	int found = 0;
 
 	/* The cpu node should have timebase and clock frequency properties */
@@ -1049,7 +1049,7 @@ static int __init rtc_init(void)
 
 	pdev = platform_device_register_simple("rtc-generic", -1, NULL, 0);
 
-	return PTR_RET(pdev);
+	return PTR_ERR_OR_ZERO(pdev);
 }
 
 module_init(rtc_init);
diff --git a/arch/powerpc/kernel/tm.S b/arch/powerpc/kernel/tm.S
index 0554d1f..cd809ea 100644
--- a/arch/powerpc/kernel/tm.S
+++ b/arch/powerpc/kernel/tm.S
@@ -79,6 +79,11 @@ _GLOBAL(tm_abort)
 	TABORT(R3)
 	blr
 
+	.section	".toc","aw"
+DSCR_DEFAULT:
+	.tc dscr_default[TC],dscr_default
+
+	.section	".text"
 
 /* void tm_reclaim(struct thread_struct *thread,
  *                 unsigned long orig_msr,
@@ -123,6 +128,7 @@ _GLOBAL(tm_reclaim)
 	mr	r15, r14
 	ori	r15, r15, MSR_FP
 	li	r16, MSR_RI
+	ori	r16, r16, MSR_EE /* IRQs hard off */
 	andc	r15, r15, r16
 	oris	r15, r15, MSR_VEC@h
 #ifdef CONFIG_VSX
@@ -155,10 +161,10 @@ _GLOBAL(tm_reclaim)
 	mfvscr	vr0
 	li	r6, THREAD_TRANSACT_VSCR
 	stvx	vr0, r3, r6
+dont_backup_vec:
 	mfspr	r0, SPRN_VRSAVE
 	std	r0, THREAD_TRANSACT_VRSAVE(r3)
 
-dont_backup_vec:
 	andi.	r0, r4, MSR_FP
 	beq	dont_backup_fp
 
@@ -187,11 +193,18 @@ dont_backup_fp:
 	std	r1, PACATMSCRATCH(r13)
 	ld	r1, PACAR1(r13)
 
+	/* Store the PPR in r11 and reset to decent value */
+	std	r11, GPR11(r1)			/* Temporary stash */
+	mfspr	r11, SPRN_PPR
+	HMT_MEDIUM
+
 	/* Now get some more GPRS free */
 	std	r7, GPR7(r1)			/* Temporary stash */
 	std	r12, GPR12(r1)			/* ''   ''    ''   */
 	ld	r12, STACK_PARAM(0)(r1)		/* Param 0, thread_struct * */
 
+	std	r11, THREAD_TM_PPR(r12)		/* Store PPR and free r11 */
+
 	addi	r7, r12, PT_CKPT_REGS		/* Thread's ckpt_regs */
 
 	/* Make r7 look like an exception frame so that we
@@ -203,15 +216,19 @@ dont_backup_fp:
 	SAVE_GPR(0, r7)				/* user r0 */
 	SAVE_GPR(2, r7)			/* user r2 */
 	SAVE_4GPRS(3, r7)			/* user r3-r6 */
-	SAVE_4GPRS(8, r7)			/* user r8-r11 */
+	SAVE_GPR(8, r7)				/* user r8 */
+	SAVE_GPR(9, r7)				/* user r9 */
+	SAVE_GPR(10, r7)			/* user r10 */
 	ld	r3, PACATMSCRATCH(r13)		/* user r1 */
 	ld	r4, GPR7(r1)			/* user r7 */
-	ld	r5, GPR12(r1)			/* user r12 */
-	GET_SCRATCH0(6)				/* user r13 */
+	ld	r5, GPR11(r1)			/* user r11 */
+	ld	r6, GPR12(r1)			/* user r12 */
+	GET_SCRATCH0(8)				/* user r13 */
 	std	r3, GPR1(r7)
 	std	r4, GPR7(r7)
-	std	r5, GPR12(r7)
-	std	r6, GPR13(r7)
+	std	r5, GPR11(r7)
+	std	r6, GPR12(r7)
+	std	r8, GPR13(r7)
 
 	SAVE_NVGPRS(r7)				/* user r14-r31 */
 
@@ -234,14 +251,12 @@ dont_backup_fp:
 	std	r6, _XER(r7)
 
 
-	/* ******************** TAR, PPR, DSCR ********** */
+	/* ******************** TAR, DSCR ********** */
 	mfspr	r3, SPRN_TAR
-	mfspr	r4, SPRN_PPR
-	mfspr	r5, SPRN_DSCR
+	mfspr	r4, SPRN_DSCR
 
 	std	r3, THREAD_TM_TAR(r12)
-	std	r4, THREAD_TM_PPR(r12)
-	std	r5, THREAD_TM_DSCR(r12)
+	std	r4, THREAD_TM_DSCR(r12)
 
 	/* MSR and flags:  We don't change CRs, and we don't need to alter
 	 * MSR.
@@ -258,7 +273,7 @@ dont_backup_fp:
 	std	r3, THREAD_TM_TFHAR(r12)
 	std	r4, THREAD_TM_TFIAR(r12)
 
-	/* AMR and PPR are checkpointed too, but are unsupported by Linux. */
+	/* AMR is checkpointed too, but is unsupported by Linux. */
 
 	/* Restore original MSR/IRQ state & clear TM mode */
 	ld	r14, TM_FRAME_L0(r1)		/* Orig MSR */
@@ -274,6 +289,12 @@ dont_backup_fp:
 	mtcr	r4
 	mtlr	r0
 	ld	r2, 40(r1)
+
+	/* Load system default DSCR */
+	ld	r4, DSCR_DEFAULT@toc(r2)
+	ld	r0, 0(r4)
+	mtspr	SPRN_DSCR, r0
+
 	blr
 
 
@@ -341,11 +362,11 @@ _GLOBAL(tm_recheckpoint)
 	lvx	vr0, r3, r5
 	mtvscr	vr0
 	REST_32VRS(0, r5, r3)			/* r5 scratch, r3 THREAD ptr */
+dont_restore_vec:
 	ld	r5, THREAD_VRSAVE(r3)
 	mtspr	SPRN_VRSAVE, r5
 #endif
 
-dont_restore_vec:
 	andi.	r0, r4, MSR_FP
 	beq	dont_restore_fp
 
@@ -358,25 +379,24 @@ dont_restore_fp:
 
 restore_gprs:
 
-	/* ******************** TAR, PPR, DSCR ********** */
-	ld	r4, THREAD_TM_TAR(r3)
-	ld	r5, THREAD_TM_PPR(r3)
-	ld	r6, THREAD_TM_DSCR(r3)
+	/* ******************** CR,LR,CCR,MSR ********** */
+	ld	r4, _CTR(r7)
+	ld	r5, _LINK(r7)
+	ld	r6, _CCR(r7)
+	ld	r8, _XER(r7)
 
-	mtspr	SPRN_TAR,	r4
-	mtspr	SPRN_PPR,	r5
-	mtspr	SPRN_DSCR,	r6
+	mtctr	r4
+	mtlr	r5
+	mtcr	r6
+	mtxer	r8
 
-	/* ******************** CR,LR,CCR,MSR ********** */
-	ld	r3, _CTR(r7)
-	ld	r4, _LINK(r7)
-	ld	r5, _CCR(r7)
-	ld	r6, _XER(r7)
+	/* ******************** TAR ******************** */
+	ld	r4, THREAD_TM_TAR(r3)
+	mtspr	SPRN_TAR,	r4
 
-	mtctr	r3
-	mtlr	r4
-	mtcr	r5
-	mtxer	r6
+	/* Load up the PPR and DSCR in GPRs only at this stage */
+	ld	r5, THREAD_TM_DSCR(r3)
+	ld	r6, THREAD_TM_PPR(r3)
 
 	/* Clear the MSR RI since we are about to change R1.  EE is already off
 	 */
@@ -384,19 +404,26 @@ restore_gprs:
 	mtmsrd	r4, 1
 
 	REST_4GPRS(0, r7)			/* GPR0-3 */
-	REST_GPR(4, r7)				/* GPR4-6 */
-	REST_GPR(5, r7)
-	REST_GPR(6, r7)
+	REST_GPR(4, r7)				/* GPR4 */
 	REST_4GPRS(8, r7)			/* GPR8-11 */
 	REST_2GPRS(12, r7)			/* GPR12-13 */
 
 	REST_NVGPRS(r7)				/* GPR14-31 */
 
-	ld	r7, GPR7(r7)			/* GPR7 */
+	/* Load up PPR and DSCR here so we don't run with user values for long
+	 */
+	mtspr	SPRN_DSCR, r5
+	mtspr	SPRN_PPR, r6
+
+	REST_GPR(5, r7)				/* GPR5-7 */
+	REST_GPR(6, r7)
+	ld	r7, GPR7(r7)
 
 	/* Commit register state as checkpointed state: */
 	TRECHKPT
 
+	HMT_MEDIUM
+
 	/* Our transactional state has now changed.
 	 *
 	 * Now just get out of here.  Transactional (current) state will be
@@ -419,6 +446,12 @@ restore_gprs:
 	mtcr	r4
 	mtlr	r0
 	ld	r2, 40(r1)
+
+	/* Load system default DSCR */
+	ld	r4, DSCR_DEFAULT@toc(r2)
+	ld	r0, 0(r4)
+	mtspr	SPRN_DSCR, r0
+
 	blr
 
 	/* ****************************************************************** */
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index e435bc0..f783c93 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -60,6 +60,7 @@
 #include <asm/switch_to.h>
 #include <asm/tm.h>
 #include <asm/debug.h>
+#include <sysdev/fsl_pci.h>
 
 #if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
 int (*__debugger)(struct pt_regs *regs) __read_mostly;
@@ -565,6 +566,8 @@ int machine_check_e500(struct pt_regs *regs)
 	if (reason & MCSR_BUS_RBERR) {
 		if (fsl_rio_mcheck_exception(regs))
 			return 1;
+		if (fsl_pci_mcheck_exception(regs))
+			return 1;
 	}
 
 	printk("Machine check in kernel mode.\n");
@@ -962,7 +965,7 @@ static int emulate_instruction(struct pt_regs *regs)
 	u32 instword;
 	u32 rd;
 
-	if (!user_mode(regs) || (regs->msr & MSR_LE))
+	if (!user_mode(regs))
 		return -EINVAL;
 	CHECK_FULL_REGS(regs);
 
@@ -1050,11 +1053,41 @@ int is_valid_bugaddr(unsigned long addr)
 	return is_kernel_addr(addr);
 }
 
+#ifdef CONFIG_MATH_EMULATION
+static int emulate_math(struct pt_regs *regs)
+{
+	int ret;
+	extern int do_mathemu(struct pt_regs *regs);
+
+	ret = do_mathemu(regs);
+	if (ret >= 0)
+		PPC_WARN_EMULATED(math, regs);
+
+	switch (ret) {
+	case 0:
+		emulate_single_step(regs);
+		return 0;
+	case 1: {
+			int code = 0;
+			code = __parse_fpscr(current->thread.fpscr.val);
+			_exception(SIGFPE, regs, code, regs->nip);
+			return 0;
+		}
+	case -EFAULT:
+		_exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip);
+		return 0;
+	}
+
+	return -1;
+}
+#else
+static inline int emulate_math(struct pt_regs *regs) { return -1; }
+#endif
+
 void __kprobes program_check_exception(struct pt_regs *regs)
 {
 	enum ctx_state prev_state = exception_enter();
 	unsigned int reason = get_reason(regs);
-	extern int do_mathemu(struct pt_regs *regs);
 
 	/* We can now get here via a FP Unavailable exception if the core
 	 * has no FPU, in that case the reason flags will be 0 */
@@ -1116,11 +1149,20 @@ void __kprobes program_check_exception(struct pt_regs *regs)
 	}
 #endif
 
+	/*
+	 * If we took the program check in the kernel skip down to sending a
+	 * SIGILL. The subsequent cases all relate to emulating instructions
+	 * which we should only do for userspace. We also do not want to enable
+	 * interrupts for kernel faults because that might lead to further
+	 * faults, and loose the context of the original exception.
+	 */
+	if (!user_mode(regs))
+		goto sigill;
+
 	/* We restore the interrupt state now */
 	if (!arch_irq_disabled_regs(regs))
 		local_irq_enable();
 
-#ifdef CONFIG_MATH_EMULATION
 	/* (reason & REASON_ILLEGAL) would be the obvious thing here,
 	 * but there seems to be a hardware bug on the 405GP (RevD)
 	 * that means ESR is sometimes set incorrectly - either to
@@ -1129,31 +1171,8 @@ void __kprobes program_check_exception(struct pt_regs *regs)
 	 * instruction or only on FP instructions, whether there is a
 	 * pattern to occurrences etc. -dgibson 31/Mar/2003
 	 */
-
-	/*
-	 * If we support a HW FPU, we need to ensure the FP state
-	 * if flushed into the thread_struct before attempting
-	 * emulation
-	 */
-#ifdef CONFIG_PPC_FPU
-	flush_fp_to_thread(current);
-#endif
-	switch (do_mathemu(regs)) {
-	case 0:
-		emulate_single_step(regs);
-		goto bail;
-	case 1: {
-			int code = 0;
-			code = __parse_fpscr(current->thread.fpscr.val);
-			_exception(SIGFPE, regs, code, regs->nip);
-			goto bail;
-		}
-	case -EFAULT:
-		_exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip);
+	if (!emulate_math(regs))
 		goto bail;
-	}
-	/* fall through on any other errors */
-#endif /* CONFIG_MATH_EMULATION */
 
 	/* Try to emulate it if we should. */
 	if (reason & (REASON_ILLEGAL | REASON_PRIVILEGED)) {
@@ -1168,6 +1187,7 @@ void __kprobes program_check_exception(struct pt_regs *regs)
 		}
 	}
 
+sigill:
 	if (reason & REASON_PRIVILEGED)
 		_exception(SIGILL, regs, ILL_PRVOPC, regs->nip);
 	else
@@ -1322,13 +1342,10 @@ void facility_unavailable_exception(struct pt_regs *regs)
 	if (status == FSCR_DSCR_LG) {
 		/* User is acessing the DSCR.  Set the inherit bit and allow
 		 * the user to set it directly in future by setting via the
-		 * H/FSCR DSCR bit.
+		 * FSCR DSCR bit.  We always leave HFSCR DSCR set.
 		 */
 		current->thread.dscr_inherit = 1;
-		if (hv)
-			mtspr(SPRN_HFSCR, value | HFSCR_DSCR);
-		else
-			mtspr(SPRN_FSCR,  value | FSCR_DSCR);
+		mtspr(SPRN_FSCR, value | FSCR_DSCR);
 		return;
 	}
 
@@ -1444,11 +1461,6 @@ void performance_monitor_exception(struct pt_regs *regs)
 #ifdef CONFIG_8xx
 void SoftwareEmulation(struct pt_regs *regs)
 {
-	extern int do_mathemu(struct pt_regs *);
-#if defined(CONFIG_MATH_EMULATION)
-	int errcode;
-#endif
-
 	CHECK_FULL_REGS(regs);
 
 	if (!user_mode(regs)) {
@@ -1456,31 +1468,10 @@ void SoftwareEmulation(struct pt_regs *regs)
 		die("Kernel Mode Software FPU Emulation", regs, SIGFPE);
 	}
 
-#ifdef CONFIG_MATH_EMULATION
-	errcode = do_mathemu(regs);
-	if (errcode >= 0)
-		PPC_WARN_EMULATED(math, regs);
-
-	switch (errcode) {
-	case 0:
-		emulate_single_step(regs);
+	if (!emulate_math(regs))
 		return;
-	case 1: {
-			int code = 0;
-			code = __parse_fpscr(current->thread.fpscr.val);
-			_exception(SIGFPE, regs, code, regs->nip);
-			return;
-		}
-	case -EFAULT:
-		_exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip);
-		return;
-	default:
-		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
-		return;
-	}
-#else
+
 	_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
-#endif
 }
 #endif /* CONFIG_8xx */
 
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index 6837f83..75702e2 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -18,23 +18,19 @@ extern void real_writeb(u8 data, volatile u8 __iomem *addr);
 extern u8 real_205_readb(volatile u8 __iomem  *addr);
 extern void real_205_writeb(u8 data, volatile u8 __iomem *addr);
 
-struct NS16550 {
-	/* this struct must be packed */
-	unsigned char rbr;  /* 0 */
-	unsigned char ier;  /* 1 */
-	unsigned char fcr;  /* 2 */
-	unsigned char lcr;  /* 3 */
-	unsigned char mcr;  /* 4 */
-	unsigned char lsr;  /* 5 */
-	unsigned char msr;  /* 6 */
-	unsigned char scr;  /* 7 */
-};
-
-#define thr rbr
-#define iir fcr
-#define dll rbr
-#define dlm ier
-#define dlab lcr
+#define UART_RBR	0
+#define UART_IER	1
+#define UART_FCR	2
+#define UART_LCR	3
+#define UART_MCR	4
+#define UART_LSR	5
+#define UART_MSR	6
+#define UART_SCR	7
+#define UART_THR	UART_RBR
+#define UART_IIR	UART_FCR
+#define UART_DLL	UART_RBR
+#define UART_DLM	UART_IER
+#define UART_DLAB	UART_LCR
 
 #define LSR_DR   0x01  /* Data ready */
 #define LSR_OE   0x02  /* Overrun */
@@ -47,52 +43,62 @@ struct NS16550 {
 
 #define LCR_DLAB 0x80
 
-static struct NS16550 __iomem *udbg_comport;
+static u8 (*udbg_uart_in)(unsigned int reg);
+static void (*udbg_uart_out)(unsigned int reg, u8 data);
 
-static void udbg_550_flush(void)
+static void udbg_uart_flush(void)
 {
-	if (udbg_comport) {
-		while ((in_8(&udbg_comport->lsr) & LSR_THRE) == 0)
-			/* wait for idle */;
-	}
+	if (!udbg_uart_in)
+		return;
+
+	/* wait for idle */
+	while ((udbg_uart_in(UART_LSR) & LSR_THRE) == 0)
+		cpu_relax();
 }
 
-static void udbg_550_putc(char c)
+static void udbg_uart_putc(char c)
 {
-	if (udbg_comport) {
-		if (c == '\n')
-			udbg_550_putc('\r');
-		udbg_550_flush();
-		out_8(&udbg_comport->thr, c);
-	}
+	if (!udbg_uart_out)
+		return;
+
+	if (c == '\n')
+		udbg_uart_putc('\r');
+	udbg_uart_flush();
+	udbg_uart_out(UART_THR, c);
 }
 
-static int udbg_550_getc_poll(void)
+static int udbg_uart_getc_poll(void)
 {
-	if (udbg_comport) {
-		if ((in_8(&udbg_comport->lsr) & LSR_DR) != 0)
-			return in_8(&udbg_comport->rbr);
-		else
-			return -1;
-	}
+	if (!udbg_uart_in || !(udbg_uart_in(UART_LSR) & LSR_DR))
+		return udbg_uart_in(UART_RBR);
 	return -1;
 }
 
-static int udbg_550_getc(void)
+static int udbg_uart_getc(void)
 {
-	if (udbg_comport) {
-		while ((in_8(&udbg_comport->lsr) & LSR_DR) == 0)
-			/* wait for char */;
-		return in_8(&udbg_comport->rbr);
-	}
-	return -1;
+	if (!udbg_uart_in)
+		return -1;
+	/* wait for char */
+	while (!(udbg_uart_in(UART_LSR) & LSR_DR))
+		cpu_relax();
+	return udbg_uart_in(UART_RBR);
+}
+
+static void udbg_use_uart(void)
+{
+	udbg_putc = udbg_uart_putc;
+	udbg_flush = udbg_uart_flush;
+	udbg_getc = udbg_uart_getc;
+	udbg_getc_poll = udbg_uart_getc_poll;
 }
 
-void udbg_init_uart(void __iomem *comport, unsigned int speed,
-		    unsigned int clock)
+void udbg_uart_setup(unsigned int speed, unsigned int clock)
 {
 	unsigned int dll, base_bauds;
 
+	if (!udbg_uart_out)
+		return;
+
 	if (clock == 0)
 		clock = 1843200;
 	if (speed == 0)
@@ -101,51 +107,43 @@ void udbg_init_uart(void __iomem *comport, unsigned int speed,
 	base_bauds = clock / 16;
 	dll = base_bauds / speed;
 
-	if (comport) {
-		udbg_comport = (struct NS16550 __iomem *)comport;
-		out_8(&udbg_comport->lcr, 0x00);
-		out_8(&udbg_comport->ier, 0xff);
-		out_8(&udbg_comport->ier, 0x00);
-		out_8(&udbg_comport->lcr, LCR_DLAB);
-		out_8(&udbg_comport->dll, dll & 0xff);
-		out_8(&udbg_comport->dlm, dll >> 8);
-		/* 8 data, 1 stop, no parity */
-		out_8(&udbg_comport->lcr, 0x03);
-		/* RTS/DTR */
-		out_8(&udbg_comport->mcr, 0x03);
-		/* Clear & enable FIFOs */
-		out_8(&udbg_comport->fcr ,0x07);
-		udbg_putc = udbg_550_putc;
-		udbg_flush = udbg_550_flush;
-		udbg_getc = udbg_550_getc;
-		udbg_getc_poll = udbg_550_getc_poll;
-	}
+	udbg_uart_out(UART_LCR, 0x00);
+	udbg_uart_out(UART_IER, 0xff);
+	udbg_uart_out(UART_IER, 0x00);
+	udbg_uart_out(UART_LCR, LCR_DLAB);
+	udbg_uart_out(UART_DLL, dll & 0xff);
+	udbg_uart_out(UART_DLM, dll >> 8);
+	/* 8 data, 1 stop, no parity */
+	udbg_uart_out(UART_LCR, 0x3);
+	/* RTS/DTR */
+	udbg_uart_out(UART_MCR, 0x3);
+	/* Clear & enable FIFOs */
+	udbg_uart_out(UART_FCR, 0x7);
 }
 
-unsigned int udbg_probe_uart_speed(void __iomem *comport, unsigned int clock)
+unsigned int udbg_probe_uart_speed(unsigned int clock)
 {
 	unsigned int dll, dlm, divisor, prescaler, speed;
 	u8 old_lcr;
-	struct NS16550 __iomem *port = comport;
 
-	old_lcr = in_8(&port->lcr);
+	old_lcr = udbg_uart_in(UART_LCR);
 
 	/* select divisor latch registers.  */
-	out_8(&port->lcr, LCR_DLAB);
+	udbg_uart_out(UART_LCR, old_lcr | LCR_DLAB);
 
 	/* now, read the divisor */
-	dll = in_8(&port->dll);
-	dlm = in_8(&port->dlm);
+	dll = udbg_uart_in(UART_DLL);
+	dlm = udbg_uart_in(UART_DLM);
 	divisor = dlm << 8 | dll;
 
 	/* check prescaling */
-	if (in_8(&port->mcr) & 0x80)
+	if (udbg_uart_in(UART_MCR) & 0x80)
 		prescaler = 4;
 	else
 		prescaler = 1;
 
 	/* restore the LCR */
-	out_8(&port->lcr, old_lcr);
+	udbg_uart_out(UART_LCR, old_lcr);
 
 	/* calculate speed */
 	speed = (clock / prescaler) / (divisor * 16);
@@ -157,195 +155,155 @@ unsigned int udbg_probe_uart_speed(void __iomem *comport, unsigned int clock)
 	return speed;
 }
 
-#ifdef CONFIG_PPC_MAPLE
-void udbg_maple_real_flush(void)
+static union {
+	unsigned char __iomem *mmio_base;
+	unsigned long pio_base;
+} udbg_uart;
+
+static unsigned int udbg_uart_stride = 1;
+
+static u8 udbg_uart_in_pio(unsigned int reg)
 {
-	if (udbg_comport) {
-		while ((real_readb(&udbg_comport->lsr) & LSR_THRE) == 0)
-			/* wait for idle */;
-	}
+	return inb(udbg_uart.pio_base + (reg * udbg_uart_stride));
 }
 
-void udbg_maple_real_putc(char c)
+static void udbg_uart_out_pio(unsigned int reg, u8 data)
 {
-	if (udbg_comport) {
-		if (c == '\n')
-			udbg_maple_real_putc('\r');
-		udbg_maple_real_flush();
-		real_writeb(c, &udbg_comport->thr); eieio();
-	}
+	outb(data, udbg_uart.pio_base + (reg * udbg_uart_stride));
 }
 
-void __init udbg_init_maple_realmode(void)
+void udbg_uart_init_pio(unsigned long port, unsigned int stride)
 {
-	udbg_comport = (struct NS16550 __iomem *)0xf40003f8;
-
-	udbg_putc = udbg_maple_real_putc;
-	udbg_flush = udbg_maple_real_flush;
-	udbg_getc = NULL;
-	udbg_getc_poll = NULL;
+	if (!port)
+		return;
+	udbg_uart.pio_base = port;
+	udbg_uart_stride = stride;
+	udbg_uart_in = udbg_uart_in_pio;
+	udbg_uart_out = udbg_uart_out_pio;
+	udbg_use_uart();
 }
-#endif /* CONFIG_PPC_MAPLE */
 
-#ifdef CONFIG_PPC_PASEMI
-void udbg_pas_real_flush(void)
+static u8 udbg_uart_in_mmio(unsigned int reg)
 {
-	if (udbg_comport) {
-		while ((real_205_readb(&udbg_comport->lsr) & LSR_THRE) == 0)
-			/* wait for idle */;
-	}
+	return in_8(udbg_uart.mmio_base + (reg * udbg_uart_stride));
 }
 
-void udbg_pas_real_putc(char c)
+static void udbg_uart_out_mmio(unsigned int reg, u8 data)
 {
-	if (udbg_comport) {
-		if (c == '\n')
-			udbg_pas_real_putc('\r');
-		udbg_pas_real_flush();
-		real_205_writeb(c, &udbg_comport->thr); eieio();
-	}
+	out_8(udbg_uart.mmio_base + (reg * udbg_uart_stride), data);
 }
 
-void udbg_init_pas_realmode(void)
-{
-	udbg_comport = (struct NS16550 __iomem *)0xfcff03f8UL;
 
-	udbg_putc = udbg_pas_real_putc;
-	udbg_flush = udbg_pas_real_flush;
-	udbg_getc = NULL;
-	udbg_getc_poll = NULL;
+void udbg_uart_init_mmio(void __iomem *addr, unsigned int stride)
+{
+	if (!addr)
+		return;
+	udbg_uart.mmio_base = addr;
+	udbg_uart_stride = stride;
+	udbg_uart_in = udbg_uart_in_mmio;
+	udbg_uart_out = udbg_uart_out_mmio;
+	udbg_use_uart();
 }
-#endif /* CONFIG_PPC_MAPLE */
 
-#ifdef CONFIG_PPC_EARLY_DEBUG_44x
-#include <platforms/44x/44x.h>
+#ifdef CONFIG_PPC_MAPLE
+
+#define UDBG_UART_MAPLE_ADDR	((void __iomem *)0xf40003f8)
 
-static void udbg_44x_as1_flush(void)
+static u8 udbg_uart_in_maple(unsigned int reg)
 {
-	if (udbg_comport) {
-		while ((as1_readb(&udbg_comport->lsr) & LSR_THRE) == 0)
-			/* wait for idle */;
-	}
+	return real_readb(UDBG_UART_MAPLE_ADDR + reg);
 }
 
-static void udbg_44x_as1_putc(char c)
+static void udbg_uart_out_maple(unsigned int reg, u8 val)
 {
-	if (udbg_comport) {
-		if (c == '\n')
-			udbg_44x_as1_putc('\r');
-		udbg_44x_as1_flush();
-		as1_writeb(c, &udbg_comport->thr); eieio();
-	}
+	real_writeb(val, UDBG_UART_MAPLE_ADDR + reg);
 }
 
-static int udbg_44x_as1_getc(void)
+void __init udbg_init_maple_realmode(void)
 {
-	if (udbg_comport) {
-		while ((as1_readb(&udbg_comport->lsr) & LSR_DR) == 0)
-			; /* wait for char */
-		return as1_readb(&udbg_comport->rbr);
-	}
-	return -1;
+	udbg_uart_in = udbg_uart_in_maple;
+	udbg_uart_out = udbg_uart_out_maple;
+	udbg_use_uart();
 }
 
-void __init udbg_init_44x_as1(void)
-{
-	udbg_comport =
-		(struct NS16550 __iomem *)PPC44x_EARLY_DEBUG_VIRTADDR;
+#endif /* CONFIG_PPC_MAPLE */
 
-	udbg_putc = udbg_44x_as1_putc;
-	udbg_flush = udbg_44x_as1_flush;
-	udbg_getc = udbg_44x_as1_getc;
-}
-#endif /* CONFIG_PPC_EARLY_DEBUG_44x */
+#ifdef CONFIG_PPC_PASEMI
 
-#ifdef CONFIG_PPC_EARLY_DEBUG_40x
-static void udbg_40x_real_flush(void)
+#define UDBG_UART_PAS_ADDR	((void __iomem *)0xfcff03f8UL)
+
+static u8 udbg_uart_in_pas(unsigned int reg)
 {
-	if (udbg_comport) {
-		while ((real_readb(&udbg_comport->lsr) & LSR_THRE) == 0)
-			/* wait for idle */;
-	}
+	return real_205_readb(UDBG_UART_PAS_ADDR + reg);
 }
 
-static void udbg_40x_real_putc(char c)
+static void udbg_uart_out_pas(unsigned int reg, u8 val)
 {
-	if (udbg_comport) {
-		if (c == '\n')
-			udbg_40x_real_putc('\r');
-		udbg_40x_real_flush();
-		real_writeb(c, &udbg_comport->thr); eieio();
-	}
+	real_205_writeb(val, UDBG_UART_PAS_ADDR + reg);
 }
 
-static int udbg_40x_real_getc(void)
+void __init udbg_init_pas_realmode(void)
 {
-	if (udbg_comport) {
-		while ((real_readb(&udbg_comport->lsr) & LSR_DR) == 0)
-			; /* wait for char */
-		return real_readb(&udbg_comport->rbr);
-	}
-	return -1;
+	udbg_uart_in = udbg_uart_in_pas;
+	udbg_uart_out = udbg_uart_out_pas;
+	udbg_use_uart();
 }
 
-void __init udbg_init_40x_realmode(void)
-{
-	udbg_comport = (struct NS16550 __iomem *)
-		CONFIG_PPC_EARLY_DEBUG_40x_PHYSADDR;
+#endif /* CONFIG_PPC_PASEMI */
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_44x
 
-	udbg_putc = udbg_40x_real_putc;
-	udbg_flush = udbg_40x_real_flush;
-	udbg_getc = udbg_40x_real_getc;
-	udbg_getc_poll = NULL;
+#include <platforms/44x/44x.h>
+
+static u8 udbg_uart_in_44x_as1(unsigned int reg)
+{
+	return as1_readb((void __iomem *)PPC44x_EARLY_DEBUG_VIRTADDR + reg);
 }
-#endif /* CONFIG_PPC_EARLY_DEBUG_40x */
 
-#ifdef CONFIG_PPC_EARLY_DEBUG_WSP
-static void udbg_wsp_flush(void)
+static void udbg_uart_out_44x_as1(unsigned int reg, u8 val)
 {
-	if (udbg_comport) {
-		while ((readb(&udbg_comport->lsr) & LSR_THRE) == 0)
-			/* wait for idle */;
-	}
+	as1_writeb(val, (void __iomem *)PPC44x_EARLY_DEBUG_VIRTADDR + reg);
 }
 
-static void udbg_wsp_putc(char c)
+void __init udbg_init_44x_as1(void)
 {
-	if (udbg_comport) {
-		if (c == '\n')
-			udbg_wsp_putc('\r');
-		udbg_wsp_flush();
-		writeb(c, &udbg_comport->thr); eieio();
-	}
+	udbg_uart_in = udbg_uart_in_44x_as1;
+	udbg_uart_out = udbg_uart_out_44x_as1;
+	udbg_use_uart();
 }
 
-static int udbg_wsp_getc(void)
+#endif /* CONFIG_PPC_EARLY_DEBUG_44x */
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_40x
+
+static u8 udbg_uart_in_40x(unsigned int reg)
 {
-	if (udbg_comport) {
-		while ((readb(&udbg_comport->lsr) & LSR_DR) == 0)
-			; /* wait for char */
-		return readb(&udbg_comport->rbr);
-	}
-	return -1;
+	return real_readb((void __iomem *)CONFIG_PPC_EARLY_DEBUG_40x_PHYSADDR
+			  + reg);
 }
 
-static int udbg_wsp_getc_poll(void)
+static void udbg_uart_out_40x(unsigned int reg, u8 val)
 {
-	if (udbg_comport)
-		if (readb(&udbg_comport->lsr) & LSR_DR)
-			return readb(&udbg_comport->rbr);
-	return -1;
+	real_writeb(val, (void __iomem *)CONFIG_PPC_EARLY_DEBUG_40x_PHYSADDR
+		    + reg);
 }
 
-void __init udbg_init_wsp(void)
+void __init udbg_init_40x_realmode(void)
 {
-	udbg_comport = (struct NS16550 __iomem *)WSP_UART_VIRT;
+	udbg_uart_in = udbg_uart_in_40x;
+	udbg_uart_out = udbg_uart_out_40x;
+	udbg_use_uart();
+}
 
-	udbg_init_uart(udbg_comport, 57600, 50000000);
+#endif /* CONFIG_PPC_EARLY_DEBUG_40x */
+
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_WSP
 
-	udbg_putc = udbg_wsp_putc;
-	udbg_flush = udbg_wsp_flush;
-	udbg_getc = udbg_wsp_getc;
-	udbg_getc_poll = udbg_wsp_getc_poll;
+void __init udbg_init_wsp(void)
+{
+	udbg_uart_init_mmio((void *)WSP_UART_VIRT, 1);
+	udbg_uart_setup(57600, 50000000);
 }
+
 #endif /* CONFIG_PPC_EARLY_DEBUG_WSP */
diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S
index 27e2f62..6b1f2a6 100644
--- a/arch/powerpc/kernel/vdso32/gettimeofday.S
+++ b/arch/powerpc/kernel/vdso32/gettimeofday.S
@@ -232,9 +232,9 @@ __do_get_tspec:
 	lwz	r6,(CFG_TB_ORIG_STAMP+4)(r9)
 
 	/* Get a stable TB value */
-2:	mftbu	r3
-	mftbl	r4
-	mftbu	r0
+2:	mfspr	r3, SPRN_TBRU
+	mfspr	r4, SPRN_TBRL
+	mfspr	r0, SPRN_TBRU
 	cmplw	cr0,r3,r0
 	bne-	2b
 
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index 536016d..408956f 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -997,21 +997,36 @@ static struct device_attribute vio_cmo_dev_attrs[] = {
 /* sysfs bus functions and data structures for CMO */
 
 #define viobus_cmo_rd_attr(name)                                        \
-static ssize_t                                                          \
-viobus_cmo_##name##_show(struct bus_type *bt, char *buf)                \
+static ssize_t cmo_##name##_show(struct bus_type *bt, char *buf)        \
 {                                                                       \
 	return sprintf(buf, "%lu\n", vio_cmo.name);                     \
-}
+}                                                                       \
+static BUS_ATTR_RO(cmo_##name)
 
 #define viobus_cmo_pool_rd_attr(name, var)                              \
 static ssize_t                                                          \
-viobus_cmo_##name##_pool_show_##var(struct bus_type *bt, char *buf)     \
+cmo_##name##_##var##_show(struct bus_type *bt, char *buf)               \
 {                                                                       \
 	return sprintf(buf, "%lu\n", vio_cmo.name.var);                 \
+}                                                                       \
+static BUS_ATTR_RO(cmo_##name##_##var)
+
+viobus_cmo_rd_attr(entitled);
+viobus_cmo_rd_attr(spare);
+viobus_cmo_rd_attr(min);
+viobus_cmo_rd_attr(desired);
+viobus_cmo_rd_attr(curr);
+viobus_cmo_pool_rd_attr(reserve, size);
+viobus_cmo_pool_rd_attr(excess, size);
+viobus_cmo_pool_rd_attr(excess, free);
+
+static ssize_t cmo_high_show(struct bus_type *bt, char *buf)
+{
+	return sprintf(buf, "%lu\n", vio_cmo.high);
 }
 
-static ssize_t viobus_cmo_high_reset(struct bus_type *bt, const char *buf,
-                                     size_t count)
+static ssize_t cmo_high_store(struct bus_type *bt, const char *buf,
+			      size_t count)
 {
 	unsigned long flags;
 
@@ -1021,35 +1036,26 @@ static ssize_t viobus_cmo_high_reset(struct bus_type *bt, const char *buf,
 
 	return count;
 }
-
-viobus_cmo_rd_attr(entitled);
-viobus_cmo_pool_rd_attr(reserve, size);
-viobus_cmo_pool_rd_attr(excess, size);
-viobus_cmo_pool_rd_attr(excess, free);
-viobus_cmo_rd_attr(spare);
-viobus_cmo_rd_attr(min);
-viobus_cmo_rd_attr(desired);
-viobus_cmo_rd_attr(curr);
-viobus_cmo_rd_attr(high);
-
-static struct bus_attribute vio_cmo_bus_attrs[] = {
-	__ATTR(cmo_entitled, S_IRUGO, viobus_cmo_entitled_show, NULL),
-	__ATTR(cmo_reserve_size, S_IRUGO, viobus_cmo_reserve_pool_show_size, NULL),
-	__ATTR(cmo_excess_size, S_IRUGO, viobus_cmo_excess_pool_show_size, NULL),
-	__ATTR(cmo_excess_free, S_IRUGO, viobus_cmo_excess_pool_show_free, NULL),
-	__ATTR(cmo_spare,   S_IRUGO, viobus_cmo_spare_show,   NULL),
-	__ATTR(cmo_min,     S_IRUGO, viobus_cmo_min_show,     NULL),
-	__ATTR(cmo_desired, S_IRUGO, viobus_cmo_desired_show, NULL),
-	__ATTR(cmo_curr,    S_IRUGO, viobus_cmo_curr_show,    NULL),
-	__ATTR(cmo_high,    S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH,
-	       viobus_cmo_high_show, viobus_cmo_high_reset),
-	__ATTR_NULL
+static BUS_ATTR_RW(cmo_high);
+
+static struct attribute *vio_bus_attrs[] = {
+	&bus_attr_cmo_entitled.attr,
+	&bus_attr_cmo_spare.attr,
+	&bus_attr_cmo_min.attr,
+	&bus_attr_cmo_desired.attr,
+	&bus_attr_cmo_curr.attr,
+	&bus_attr_cmo_high.attr,
+	&bus_attr_cmo_reserve_size.attr,
+	&bus_attr_cmo_excess_size.attr,
+	&bus_attr_cmo_excess_free.attr,
+	NULL,
 };
+ATTRIBUTE_GROUPS(vio_bus);
 
 static void vio_cmo_sysfs_init(void)
 {
 	vio_bus_type.dev_attrs = vio_cmo_dev_attrs;
-	vio_bus_type.bus_attrs = vio_cmo_bus_attrs;
+	vio_bus_type.bus_groups = vio_bus_groups;
 }
 #else /* CONFIG_PPC_SMLPAR */
 int vio_cmo_entitlement_update(size_t new_entitlement) { return 0; }
@@ -1153,7 +1159,7 @@ EXPORT_SYMBOL(vio_h_cop_sync);
 
 static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev)
 {
-	const unsigned char *dma_window;
+	const __be32 *dma_window;
 	struct iommu_table *tbl;
 	unsigned long offset, size;
 
@@ -1312,8 +1318,7 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node)
 {
 	struct vio_dev *viodev;
 	struct device_node *parent_node;
-	const unsigned int *unit_address;
-	const unsigned int *pfo_resid = NULL;
+	const __be32 *prop;
 	enum vio_dev_family family;
 	const char *of_node_name = of_node->name ? of_node->name : "<unknown>";
 
@@ -1360,6 +1365,8 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node)
 	/* we need the 'device_type' property, in order to match with drivers */
 	viodev->family = family;
 	if (viodev->family == VDEVICE) {
+		unsigned int unit_address;
+
 		if (of_node->type != NULL)
 			viodev->type = of_node->type;
 		else {
@@ -1368,24 +1375,24 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node)
 			goto out;
 		}
 
-		unit_address = of_get_property(of_node, "reg", NULL);
-		if (unit_address == NULL) {
+		prop = of_get_property(of_node, "reg", NULL);
+		if (prop == NULL) {
 			pr_warn("%s: node %s missing 'reg'\n",
 					__func__, of_node_name);
 			goto out;
 		}
-		dev_set_name(&viodev->dev, "%x", *unit_address);
+		unit_address = of_read_number(prop, 1);
+		dev_set_name(&viodev->dev, "%x", unit_address);
 		viodev->irq = irq_of_parse_and_map(of_node, 0);
-		viodev->unit_address = *unit_address;
+		viodev->unit_address = unit_address;
 	} else {
 		/* PFO devices need their resource_id for submitting COP_OPs
 		 * This is an optional field for devices, but is required when
 		 * performing synchronous ops */
-		pfo_resid = of_get_property(of_node, "ibm,resource-id", NULL);
-		if (pfo_resid != NULL)
-			viodev->resource_id = *pfo_resid;
+		prop = of_get_property(of_node, "ibm,resource-id", NULL);
+		if (prop != NULL)
+			viodev->resource_id = of_read_number(prop, 1);
 
-		unit_address = NULL;
 		dev_set_name(&viodev->dev, "%s", of_node_name);
 		viodev->type = of_node_name;
 		viodev->irq = 0;
@@ -1529,11 +1536,15 @@ static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
 	const char *cp;
 
 	dn = dev->of_node;
-	if (!dn)
-		return -ENODEV;
+	if (!dn) {
+		strcat(buf, "\n");
+		return strlen(buf);
+	}
 	cp = of_get_property(dn, "compatible", NULL);
-	if (!cp)
-		return -ENODEV;
+	if (!cp) {
+		strcat(buf, "\n");
+		return strlen(buf);
+	}
 
 	return sprintf(buf, "vio:T%sS%s\n", vio_dev->type, cp);
 }
@@ -1622,7 +1633,6 @@ static struct vio_dev *vio_find_name(const char *name)
  */
 struct vio_dev *vio_find_node(struct device_node *vnode)
 {
-	const uint32_t *unit_address;
 	char kobj_name[20];
 	struct device_node *vnode_parent;
 	const char *dev_type;
@@ -1638,10 +1648,13 @@ struct vio_dev *vio_find_node(struct device_node *vnode)
 
 	/* construct the kobject name from the device node */
 	if (!strcmp(dev_type, "vdevice")) {
-		unit_address = of_get_property(vnode, "reg", NULL);
-		if (!unit_address)
+		const __be32 *prop;
+		
+		prop = of_get_property(vnode, "reg", NULL);
+		if (!prop)
 			return NULL;
-		snprintf(kobj_name, sizeof(kobj_name), "%x", *unit_address);
+		snprintf(kobj_name, sizeof(kobj_name), "%x",
+			 (uint32_t)of_read_number(prop, 1));
 	} else if (!strcmp(dev_type, "ibm,platform-facilities"))
 		snprintf(kobj_name, sizeof(kobj_name), "%s", vnode->name);
 	else
diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig
index eb643f8..ffaef2c 100644
--- a/arch/powerpc/kvm/Kconfig
+++ b/arch/powerpc/kvm/Kconfig
@@ -72,6 +72,7 @@ config KVM_BOOK3S_64_HV
 	bool "KVM support for POWER7 and PPC970 using hypervisor mode in host"
 	depends on KVM_BOOK3S_64
 	select MMU_NOTIFIER
+	select CMA
 	---help---
 	  Support running unmodified book3s_64 guest kernels in
 	  virtual machines on POWER7 and PPC970 processors that have
diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
index 008cd85..6646c95 100644
--- a/arch/powerpc/kvm/Makefile
+++ b/arch/powerpc/kvm/Makefile
@@ -81,6 +81,7 @@ kvm-book3s_64-builtin-objs-$(CONFIG_KVM_BOOK3S_64_HV) := \
 	book3s_64_vio_hv.o \
 	book3s_hv_ras.o \
 	book3s_hv_builtin.o \
+	book3s_hv_cma.o \
 	$(kvm-book3s_64-builtin-xics-objs-y)
 
 kvm-book3s_64-objs-$(CONFIG_KVM_XICS) += \
diff --git a/arch/powerpc/kvm/book3s_64_mmu.c b/arch/powerpc/kvm/book3s_64_mmu.c
index 739bfba..7e345e0 100644
--- a/arch/powerpc/kvm/book3s_64_mmu.c
+++ b/arch/powerpc/kvm/book3s_64_mmu.c
@@ -182,10 +182,13 @@ static int kvmppc_mmu_book3s_64_xlate(struct kvm_vcpu *vcpu, gva_t eaddr,
 	hva_t ptegp;
 	u64 pteg[16];
 	u64 avpn = 0;
+	u64 v, r;
+	u64 v_val, v_mask;
+	u64 eaddr_mask;
 	int i;
-	u8 key = 0;
+	u8 pp, key = 0;
 	bool found = false;
-	int second = 0;
+	bool second = false;
 	ulong mp_ea = vcpu->arch.magic_page_ea;
 
 	/* Magic page override */
@@ -208,8 +211,16 @@ static int kvmppc_mmu_book3s_64_xlate(struct kvm_vcpu *vcpu, gva_t eaddr,
 		goto no_seg_found;
 
 	avpn = kvmppc_mmu_book3s_64_get_avpn(slbe, eaddr);
+	v_val = avpn & HPTE_V_AVPN;
+
 	if (slbe->tb)
-		avpn |= SLB_VSID_B_1T;
+		v_val |= SLB_VSID_B_1T;
+	if (slbe->large)
+		v_val |= HPTE_V_LARGE;
+	v_val |= HPTE_V_VALID;
+
+	v_mask = SLB_VSID_B | HPTE_V_AVPN | HPTE_V_LARGE | HPTE_V_VALID |
+		HPTE_V_SECONDARY;
 
 do_second:
 	ptegp = kvmppc_mmu_book3s_64_get_pteg(vcpu_book3s, slbe, eaddr, second);
@@ -227,91 +238,74 @@ do_second:
 		key = 4;
 
 	for (i=0; i<16; i+=2) {
-		u64 v = pteg[i];
-		u64 r = pteg[i+1];
-
-		/* Valid check */
-		if (!(v & HPTE_V_VALID))
-			continue;
-		/* Hash check */
-		if ((v & HPTE_V_SECONDARY) != second)
-			continue;
-
-		/* AVPN compare */
-		if (HPTE_V_COMPARE(avpn, v)) {
-			u8 pp = (r & HPTE_R_PP) | key;
-			int eaddr_mask = 0xFFF;
-
-			gpte->eaddr = eaddr;
-			gpte->vpage = kvmppc_mmu_book3s_64_ea_to_vp(vcpu,
-								    eaddr,
-								    data);
-			if (slbe->large)
-				eaddr_mask = 0xFFFFFF;
-			gpte->raddr = (r & HPTE_R_RPN) | (eaddr & eaddr_mask);
-			gpte->may_execute = ((r & HPTE_R_N) ? false : true);
-			gpte->may_read = false;
-			gpte->may_write = false;
-
-			switch (pp) {
-			case 0:
-			case 1:
-			case 2:
-			case 6:
-				gpte->may_write = true;
-				/* fall through */
-			case 3:
-			case 5:
-			case 7:
-				gpte->may_read = true;
-				break;
-			}
-
-			dprintk("KVM MMU: Translated 0x%lx [0x%llx] -> 0x%llx "
-				"-> 0x%lx\n",
-				eaddr, avpn, gpte->vpage, gpte->raddr);
+		/* Check all relevant fields of 1st dword */
+		if ((pteg[i] & v_mask) == v_val) {
 			found = true;
 			break;
 		}
 	}
 
-	/* Update PTE R and C bits, so the guest's swapper knows we used the
-	 * page */
-	if (found) {
-		u32 oldr = pteg[i+1];
+	if (!found) {
+		if (second)
+			goto no_page_found;
+		v_val |= HPTE_V_SECONDARY;
+		second = true;
+		goto do_second;
+	}
 
-		if (gpte->may_read) {
-			/* Set the accessed flag */
-			pteg[i+1] |= HPTE_R_R;
-		}
-		if (gpte->may_write) {
-			/* Set the dirty flag */
-			pteg[i+1] |= HPTE_R_C;
-		} else {
-			dprintk("KVM: Mapping read-only page!\n");
-		}
+	v = pteg[i];
+	r = pteg[i+1];
+	pp = (r & HPTE_R_PP) | key;
+	eaddr_mask = 0xFFF;
+
+	gpte->eaddr = eaddr;
+	gpte->vpage = kvmppc_mmu_book3s_64_ea_to_vp(vcpu, eaddr, data);
+	if (slbe->large)
+		eaddr_mask = 0xFFFFFF;
+	gpte->raddr = (r & HPTE_R_RPN & ~eaddr_mask) | (eaddr & eaddr_mask);
+	gpte->may_execute = ((r & HPTE_R_N) ? false : true);
+	gpte->may_read = false;
+	gpte->may_write = false;
+
+	switch (pp) {
+	case 0:
+	case 1:
+	case 2:
+	case 6:
+		gpte->may_write = true;
+		/* fall through */
+	case 3:
+	case 5:
+	case 7:
+		gpte->may_read = true;
+		break;
+	}
 
-		/* Write back into the PTEG */
-		if (pteg[i+1] != oldr)
-			copy_to_user((void __user *)ptegp, pteg, sizeof(pteg));
+	dprintk("KVM MMU: Translated 0x%lx [0x%llx] -> 0x%llx "
+		"-> 0x%lx\n",
+		eaddr, avpn, gpte->vpage, gpte->raddr);
 
-		if (!gpte->may_read)
-			return -EPERM;
-		return 0;
-	} else {
-		dprintk("KVM MMU: No PTE found (ea=0x%lx sdr1=0x%llx "
-			"ptegp=0x%lx)\n",
-			eaddr, to_book3s(vcpu)->sdr1, ptegp);
-		for (i = 0; i < 16; i += 2)
-			dprintk("   %02d: 0x%llx - 0x%llx (0x%llx)\n",
-				i, pteg[i], pteg[i+1], avpn);
-
-		if (!second) {
-			second = HPTE_V_SECONDARY;
-			goto do_second;
-		}
+	/* Update PTE R and C bits, so the guest's swapper knows we used the
+	 * page */
+	if (gpte->may_read) {
+		/* Set the accessed flag */
+		r |= HPTE_R_R;
+	}
+	if (data && gpte->may_write) {
+		/* Set the dirty flag -- XXX even if not writing */
+		r |= HPTE_R_C;
+	}
+
+	/* Write back into the PTEG */
+	if (pteg[i+1] != r) {
+		pteg[i+1] = r;
+		copy_to_user((void __user *)ptegp, pteg, sizeof(pteg));
 	}
 
+	if (!gpte->may_read)
+		return -EPERM;
+	return 0;
+
 no_page_found:
 	return -ENOENT;
 
diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c
index 710d313..043eec8 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_hv.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c
@@ -37,6 +37,8 @@
 #include <asm/ppc-opcode.h>
 #include <asm/cputable.h>
 
+#include "book3s_hv_cma.h"
+
 /* POWER7 has 10-bit LPIDs, PPC970 has 6-bit LPIDs */
 #define MAX_LPID_970	63
 
@@ -52,8 +54,8 @@ long kvmppc_alloc_hpt(struct kvm *kvm, u32 *htab_orderp)
 {
 	unsigned long hpt;
 	struct revmap_entry *rev;
-	struct kvmppc_linear_info *li;
-	long order = kvm_hpt_order;
+	struct page *page = NULL;
+	long order = KVM_DEFAULT_HPT_ORDER;
 
 	if (htab_orderp) {
 		order = *htab_orderp;
@@ -61,26 +63,23 @@ long kvmppc_alloc_hpt(struct kvm *kvm, u32 *htab_orderp)
 			order = PPC_MIN_HPT_ORDER;
 	}
 
+	kvm->arch.hpt_cma_alloc = 0;
 	/*
-	 * If the user wants a different size from default,
 	 * try first to allocate it from the kernel page allocator.
+	 * We keep the CMA reserved for failed allocation.
 	 */
-	hpt = 0;
-	if (order != kvm_hpt_order) {
-		hpt = __get_free_pages(GFP_KERNEL|__GFP_ZERO|__GFP_REPEAT|
-				       __GFP_NOWARN, order - PAGE_SHIFT);
-		if (!hpt)
-			--order;
-	}
+	hpt = __get_free_pages(GFP_KERNEL | __GFP_ZERO | __GFP_REPEAT |
+			       __GFP_NOWARN, order - PAGE_SHIFT);
 
 	/* Next try to allocate from the preallocated pool */
 	if (!hpt) {
-		li = kvm_alloc_hpt();
-		if (li) {
-			hpt = (ulong)li->base_virt;
-			kvm->arch.hpt_li = li;
-			order = kvm_hpt_order;
-		}
+		VM_BUG_ON(order < KVM_CMA_CHUNK_ORDER);
+		page = kvm_alloc_hpt(1 << (order - PAGE_SHIFT));
+		if (page) {
+			hpt = (unsigned long)pfn_to_kaddr(page_to_pfn(page));
+			kvm->arch.hpt_cma_alloc = 1;
+		} else
+			--order;
 	}
 
 	/* Lastly try successively smaller sizes from the page allocator */
@@ -118,8 +117,8 @@ long kvmppc_alloc_hpt(struct kvm *kvm, u32 *htab_orderp)
 	return 0;
 
  out_freehpt:
-	if (kvm->arch.hpt_li)
-		kvm_release_hpt(kvm->arch.hpt_li);
+	if (kvm->arch.hpt_cma_alloc)
+		kvm_release_hpt(page, 1 << (order - PAGE_SHIFT));
 	else
 		free_pages(hpt, order - PAGE_SHIFT);
 	return -ENOMEM;
@@ -165,8 +164,9 @@ void kvmppc_free_hpt(struct kvm *kvm)
 {
 	kvmppc_free_lpid(kvm->arch.lpid);
 	vfree(kvm->arch.revmap);
-	if (kvm->arch.hpt_li)
-		kvm_release_hpt(kvm->arch.hpt_li);
+	if (kvm->arch.hpt_cma_alloc)
+		kvm_release_hpt(virt_to_page(kvm->arch.hpt_virt),
+				1 << (kvm->arch.hpt_order - PAGE_SHIFT));
 	else
 		free_pages(kvm->arch.hpt_virt,
 			   kvm->arch.hpt_order - PAGE_SHIFT);
@@ -1579,7 +1579,7 @@ int kvm_vm_ioctl_get_htab_fd(struct kvm *kvm, struct kvm_get_htab_fd *ghf)
 	ctx->first_pass = 1;
 
 	rwflag = (ghf->flags & KVM_GET_HTAB_WRITE) ? O_WRONLY : O_RDONLY;
-	ret = anon_inode_getfd("kvm-htab", &kvm_htab_fops, ctx, rwflag);
+	ret = anon_inode_getfd("kvm-htab", &kvm_htab_fops, ctx, rwflag | O_CLOEXEC);
 	if (ret < 0) {
 		kvm_put_kvm(kvm);
 		return ret;
diff --git a/arch/powerpc/kvm/book3s_64_slb.S b/arch/powerpc/kvm/book3s_64_slb.S
index 4f0caec..4f12e8f 100644
--- a/arch/powerpc/kvm/book3s_64_slb.S
+++ b/arch/powerpc/kvm/book3s_64_slb.S
@@ -17,6 +17,10 @@
  * Authors: Alexander Graf <agraf@suse.de>
  */
 
+#ifdef __LITTLE_ENDIAN__
+#error Need to fix SLB shadow accesses in little endian mode
+#endif
+
 #define SHADOW_SLB_ESID(num)	(SLBSHADOW_SAVEAREA + (num * 0x10))
 #define SHADOW_SLB_VSID(num)	(SLBSHADOW_SAVEAREA + (num * 0x10) + 0x8)
 #define UNBOLT_SLB_ENTRY(num) \
diff --git a/arch/powerpc/kvm/book3s_64_vio.c b/arch/powerpc/kvm/book3s_64_vio.c
index b2d3f3b..54cf9bc 100644
--- a/arch/powerpc/kvm/book3s_64_vio.c
+++ b/arch/powerpc/kvm/book3s_64_vio.c
@@ -136,7 +136,7 @@ long kvm_vm_ioctl_create_spapr_tce(struct kvm *kvm,
 	mutex_unlock(&kvm->lock);
 
 	return anon_inode_getfd("kvm-spapr-tce", &kvm_spapr_tce_fops,
-				stt, O_RDWR);
+				stt, O_RDWR | O_CLOEXEC);
 
 fail:
 	if (stt) {
diff --git a/arch/powerpc/kvm/book3s_emulate.c b/arch/powerpc/kvm/book3s_emulate.c
index 1f6344c..360ce68 100644
--- a/arch/powerpc/kvm/book3s_emulate.c
+++ b/arch/powerpc/kvm/book3s_emulate.c
@@ -458,6 +458,7 @@ int kvmppc_core_emulate_mtspr(struct kvm_vcpu *vcpu, int sprn, ulong spr_val)
 	case SPRN_PMC4_GEKKO:
 	case SPRN_WPAR_GEKKO:
 	case SPRN_MSSSR0:
+	case SPRN_DABR:
 		break;
 unprivileged:
 	default:
@@ -555,6 +556,7 @@ int kvmppc_core_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, ulong *spr_val)
 	case SPRN_PMC4_GEKKO:
 	case SPRN_WPAR_GEKKO:
 	case SPRN_MSSSR0:
+	case SPRN_DABR:
 		*spr_val = 0;
 		break;
 	default:
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 7629cd3..62a2b5a 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -217,7 +217,7 @@ struct kvm_vcpu *kvmppc_find_vcpu(struct kvm *kvm, int id)
 
 static void init_vpa(struct kvm_vcpu *vcpu, struct lppaca *vpa)
 {
-	vpa->shared_proc = 1;
+	vpa->__old_status |= LPPACA_OLD_SHARED_PROC;
 	vpa->yield_count = 1;
 }
 
@@ -680,13 +680,12 @@ static int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 }
 
 int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
-                                  struct kvm_sregs *sregs)
+				  struct kvm_sregs *sregs)
 {
 	int i;
 
-	sregs->pvr = vcpu->arch.pvr;
-
 	memset(sregs, 0, sizeof(struct kvm_sregs));
+	sregs->pvr = vcpu->arch.pvr;
 	for (i = 0; i < vcpu->arch.slb_max; i++) {
 		sregs->u.s.ppc64.slb[i].slbe = vcpu->arch.slb[i].orige;
 		sregs->u.s.ppc64.slb[i].slbv = vcpu->arch.slb[i].origv;
@@ -696,7 +695,7 @@ int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
 }
 
 int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
-                                  struct kvm_sregs *sregs)
+				  struct kvm_sregs *sregs)
 {
 	int i, j;
 
@@ -1511,10 +1510,10 @@ static inline int lpcr_rmls(unsigned long rma_size)
 
 static int kvm_rma_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 {
-	struct kvmppc_linear_info *ri = vma->vm_file->private_data;
 	struct page *page;
+	struct kvm_rma_info *ri = vma->vm_file->private_data;
 
-	if (vmf->pgoff >= ri->npages)
+	if (vmf->pgoff >= kvm_rma_pages)
 		return VM_FAULT_SIGBUS;
 
 	page = pfn_to_page(ri->base_pfn + vmf->pgoff);
@@ -1536,7 +1535,7 @@ static int kvm_rma_mmap(struct file *file, struct vm_area_struct *vma)
 
 static int kvm_rma_release(struct inode *inode, struct file *filp)
 {
-	struct kvmppc_linear_info *ri = filp->private_data;
+	struct kvm_rma_info *ri = filp->private_data;
 
 	kvm_release_rma(ri);
 	return 0;
@@ -1549,18 +1548,27 @@ static const struct file_operations kvm_rma_fops = {
 
 long kvm_vm_ioctl_allocate_rma(struct kvm *kvm, struct kvm_allocate_rma *ret)
 {
-	struct kvmppc_linear_info *ri;
 	long fd;
+	struct kvm_rma_info *ri;
+	/*
+	 * Only do this on PPC970 in HV mode
+	 */
+	if (!cpu_has_feature(CPU_FTR_HVMODE) ||
+	    !cpu_has_feature(CPU_FTR_ARCH_201))
+		return -EINVAL;
+
+	if (!kvm_rma_pages)
+		return -EINVAL;
 
 	ri = kvm_alloc_rma();
 	if (!ri)
 		return -ENOMEM;
 
-	fd = anon_inode_getfd("kvm-rma", &kvm_rma_fops, ri, O_RDWR);
+	fd = anon_inode_getfd("kvm-rma", &kvm_rma_fops, ri, O_RDWR | O_CLOEXEC);
 	if (fd < 0)
 		kvm_release_rma(ri);
 
-	ret->rma_size = ri->npages << PAGE_SHIFT;
+	ret->rma_size = kvm_rma_pages << PAGE_SHIFT;
 	return fd;
 }
 
@@ -1725,7 +1733,7 @@ static int kvmppc_hv_setup_htab_rma(struct kvm_vcpu *vcpu)
 {
 	int err = 0;
 	struct kvm *kvm = vcpu->kvm;
-	struct kvmppc_linear_info *ri = NULL;
+	struct kvm_rma_info *ri = NULL;
 	unsigned long hva;
 	struct kvm_memory_slot *memslot;
 	struct vm_area_struct *vma;
@@ -1803,7 +1811,7 @@ static int kvmppc_hv_setup_htab_rma(struct kvm_vcpu *vcpu)
 
 	} else {
 		/* Set up to use an RMO region */
-		rma_size = ri->npages;
+		rma_size = kvm_rma_pages;
 		if (rma_size > memslot->npages)
 			rma_size = memslot->npages;
 		rma_size <<= PAGE_SHIFT;
@@ -1831,14 +1839,14 @@ static int kvmppc_hv_setup_htab_rma(struct kvm_vcpu *vcpu)
 			/* POWER7 */
 			lpcr &= ~(LPCR_VPM0 | LPCR_VRMA_L);
 			lpcr |= rmls << LPCR_RMLS_SH;
-			kvm->arch.rmor = kvm->arch.rma->base_pfn << PAGE_SHIFT;
+			kvm->arch.rmor = ri->base_pfn << PAGE_SHIFT;
 		}
 		kvm->arch.lpcr = lpcr;
 		pr_info("KVM: Using RMO at %lx size %lx (LPCR = %lx)\n",
 			ri->base_pfn << PAGE_SHIFT, rma_size, lpcr);
 
 		/* Initialize phys addrs of pages in RMO */
-		npages = ri->npages;
+		npages = kvm_rma_pages;
 		porder = __ilog2(npages);
 		physp = memslot->arch.slot_phys;
 		if (physp) {
diff --git a/arch/powerpc/kvm/book3s_hv_builtin.c b/arch/powerpc/kvm/book3s_hv_builtin.c
index ec0a9e5..8cd0dae 100644
--- a/arch/powerpc/kvm/book3s_hv_builtin.c
+++ b/arch/powerpc/kvm/book3s_hv_builtin.c
@@ -13,33 +13,34 @@
 #include <linux/spinlock.h>
 #include <linux/bootmem.h>
 #include <linux/init.h>
+#include <linux/memblock.h>
+#include <linux/sizes.h>
 
 #include <asm/cputable.h>
 #include <asm/kvm_ppc.h>
 #include <asm/kvm_book3s.h>
 
-#define KVM_LINEAR_RMA		0
-#define KVM_LINEAR_HPT		1
-
-static void __init kvm_linear_init_one(ulong size, int count, int type);
-static struct kvmppc_linear_info *kvm_alloc_linear(int type);
-static void kvm_release_linear(struct kvmppc_linear_info *ri);
-
-int kvm_hpt_order = KVM_DEFAULT_HPT_ORDER;
-EXPORT_SYMBOL_GPL(kvm_hpt_order);
-
-/*************** RMA *************/
-
+#include "book3s_hv_cma.h"
+/*
+ * Hash page table alignment on newer cpus(CPU_FTR_ARCH_206)
+ * should be power of 2.
+ */
+#define HPT_ALIGN_PAGES		((1 << 18) >> PAGE_SHIFT) /* 256k */
+/*
+ * By default we reserve 5% of memory for hash pagetable allocation.
+ */
+static unsigned long kvm_cma_resv_ratio = 5;
 /*
- * This maintains a list of RMAs (real mode areas) for KVM guests to use.
+ * We allocate RMAs (real mode areas) for KVM guests from the KVM CMA area.
  * Each RMA has to be physically contiguous and of a size that the
  * hardware supports.  PPC970 and POWER7 support 64MB, 128MB and 256MB,
  * and other larger sizes.  Since we are unlikely to be allocate that
  * much physically contiguous memory after the system is up and running,
- * we preallocate a set of RMAs in early boot for KVM to use.
+ * we preallocate a set of RMAs in early boot using CMA.
+ * should be power of 2.
  */
-static unsigned long kvm_rma_size = 64 << 20;	/* 64MB */
-static unsigned long kvm_rma_count;
+unsigned long kvm_rma_pages = (1 << 27) >> PAGE_SHIFT;	/* 128MB */
+EXPORT_SYMBOL_GPL(kvm_rma_pages);
 
 /* Work out RMLS (real mode limit selector) field value for a given RMA size.
    Assumes POWER7 or PPC970. */
@@ -69,165 +70,114 @@ static inline int lpcr_rmls(unsigned long rma_size)
 
 static int __init early_parse_rma_size(char *p)
 {
-	if (!p)
-		return 1;
+	unsigned long kvm_rma_size;
 
+	pr_debug("%s(%s)\n", __func__, p);
+	if (!p)
+		return -EINVAL;
 	kvm_rma_size = memparse(p, &p);
-
+	/*
+	 * Check that the requested size is one supported in hardware
+	 */
+	if (lpcr_rmls(kvm_rma_size) < 0) {
+		pr_err("RMA size of 0x%lx not supported\n", kvm_rma_size);
+		return -EINVAL;
+	}
+	kvm_rma_pages = kvm_rma_size >> PAGE_SHIFT;
 	return 0;
 }
 early_param("kvm_rma_size", early_parse_rma_size);
 
-static int __init early_parse_rma_count(char *p)
+struct kvm_rma_info *kvm_alloc_rma()
 {
-	if (!p)
-		return 1;
-
-	kvm_rma_count = simple_strtoul(p, NULL, 0);
-
-	return 0;
-}
-early_param("kvm_rma_count", early_parse_rma_count);
-
-struct kvmppc_linear_info *kvm_alloc_rma(void)
-{
-	return kvm_alloc_linear(KVM_LINEAR_RMA);
+	struct page *page;
+	struct kvm_rma_info *ri;
+
+	ri = kmalloc(sizeof(struct kvm_rma_info), GFP_KERNEL);
+	if (!ri)
+		return NULL;
+	page = kvm_alloc_cma(kvm_rma_pages, kvm_rma_pages);
+	if (!page)
+		goto err_out;
+	atomic_set(&ri->use_count, 1);
+	ri->base_pfn = page_to_pfn(page);
+	return ri;
+err_out:
+	kfree(ri);
+	return NULL;
 }
 EXPORT_SYMBOL_GPL(kvm_alloc_rma);
 
-void kvm_release_rma(struct kvmppc_linear_info *ri)
+void kvm_release_rma(struct kvm_rma_info *ri)
 {
-	kvm_release_linear(ri);
+	if (atomic_dec_and_test(&ri->use_count)) {
+		kvm_release_cma(pfn_to_page(ri->base_pfn), kvm_rma_pages);
+		kfree(ri);
+	}
 }
 EXPORT_SYMBOL_GPL(kvm_release_rma);
 
-/*************** HPT *************/
-
-/*
- * This maintains a list of big linear HPT tables that contain the GVA->HPA
- * memory mappings. If we don't reserve those early on, we might not be able
- * to get a big (usually 16MB) linear memory region from the kernel anymore.
- */
-
-static unsigned long kvm_hpt_count;
-
-static int __init early_parse_hpt_count(char *p)
+static int __init early_parse_kvm_cma_resv(char *p)
 {
+	pr_debug("%s(%s)\n", __func__, p);
 	if (!p)
-		return 1;
-
-	kvm_hpt_count = simple_strtoul(p, NULL, 0);
-
-	return 0;
+		return -EINVAL;
+	return kstrtoul(p, 0, &kvm_cma_resv_ratio);
 }
-early_param("kvm_hpt_count", early_parse_hpt_count);
+early_param("kvm_cma_resv_ratio", early_parse_kvm_cma_resv);
 
-struct kvmppc_linear_info *kvm_alloc_hpt(void)
+struct page *kvm_alloc_hpt(unsigned long nr_pages)
 {
-	return kvm_alloc_linear(KVM_LINEAR_HPT);
+	unsigned long align_pages = HPT_ALIGN_PAGES;
+
+	/* Old CPUs require HPT aligned on a multiple of its size */
+	if (!cpu_has_feature(CPU_FTR_ARCH_206))
+		align_pages = nr_pages;
+	return kvm_alloc_cma(nr_pages, align_pages);
 }
 EXPORT_SYMBOL_GPL(kvm_alloc_hpt);
 
-void kvm_release_hpt(struct kvmppc_linear_info *li)
+void kvm_release_hpt(struct page *page, unsigned long nr_pages)
 {
-	kvm_release_linear(li);
+	kvm_release_cma(page, nr_pages);
 }
 EXPORT_SYMBOL_GPL(kvm_release_hpt);
 
-/*************** generic *************/
-
-static LIST_HEAD(free_linears);
-static DEFINE_SPINLOCK(linear_lock);
-
-static void __init kvm_linear_init_one(ulong size, int count, int type)
-{
-	unsigned long i;
-	unsigned long j, npages;
-	void *linear;
-	struct page *pg;
-	const char *typestr;
-	struct kvmppc_linear_info *linear_info;
-
-	if (!count)
-		return;
-
-	typestr = (type == KVM_LINEAR_RMA) ? "RMA" : "HPT";
-
-	npages = size >> PAGE_SHIFT;
-	linear_info = alloc_bootmem(count * sizeof(struct kvmppc_linear_info));
-	for (i = 0; i < count; ++i) {
-		linear = alloc_bootmem_align(size, size);
-		pr_debug("Allocated KVM %s at %p (%ld MB)\n", typestr, linear,
-			 size >> 20);
-		linear_info[i].base_virt = linear;
-		linear_info[i].base_pfn = __pa(linear) >> PAGE_SHIFT;
-		linear_info[i].npages = npages;
-		linear_info[i].type = type;
-		list_add_tail(&linear_info[i].list, &free_linears);
-		atomic_set(&linear_info[i].use_count, 0);
-
-		pg = pfn_to_page(linear_info[i].base_pfn);
-		for (j = 0; j < npages; ++j) {
-			atomic_inc(&pg->_count);
-			++pg;
-		}
-	}
-}
-
-static struct kvmppc_linear_info *kvm_alloc_linear(int type)
-{
-	struct kvmppc_linear_info *ri, *ret;
-
-	ret = NULL;
-	spin_lock(&linear_lock);
-	list_for_each_entry(ri, &free_linears, list) {
-		if (ri->type != type)
-			continue;
-
-		list_del(&ri->list);
-		atomic_inc(&ri->use_count);
-		memset(ri->base_virt, 0, ri->npages << PAGE_SHIFT);
-		ret = ri;
-		break;
-	}
-	spin_unlock(&linear_lock);
-	return ret;
-}
-
-static void kvm_release_linear(struct kvmppc_linear_info *ri)
-{
-	if (atomic_dec_and_test(&ri->use_count)) {
-		spin_lock(&linear_lock);
-		list_add_tail(&ri->list, &free_linears);
-		spin_unlock(&linear_lock);
-
-	}
-}
-
-/*
- * Called at boot time while the bootmem allocator is active,
- * to allocate contiguous physical memory for the hash page
- * tables for guests.
+/**
+ * kvm_cma_reserve() - reserve area for kvm hash pagetable
+ *
+ * This function reserves memory from early allocator. It should be
+ * called by arch specific code once the early allocator (memblock or bootmem)
+ * has been activated and all other subsystems have already allocated/reserved
+ * memory.
  */
-void __init kvm_linear_init(void)
+void __init kvm_cma_reserve(void)
 {
-	/* HPT */
-	kvm_linear_init_one(1 << kvm_hpt_order, kvm_hpt_count, KVM_LINEAR_HPT);
-
-	/* RMA */
-	/* Only do this on PPC970 in HV mode */
-	if (!cpu_has_feature(CPU_FTR_HVMODE) ||
-	    !cpu_has_feature(CPU_FTR_ARCH_201))
-		return;
-
-	if (!kvm_rma_size || !kvm_rma_count)
-		return;
-
-	/* Check that the requested size is one supported in hardware */
-	if (lpcr_rmls(kvm_rma_size) < 0) {
-		pr_err("RMA size of 0x%lx not supported\n", kvm_rma_size);
-		return;
+	unsigned long align_size;
+	struct memblock_region *reg;
+	phys_addr_t selected_size = 0;
+	/*
+	 * We cannot use memblock_phys_mem_size() here, because
+	 * memblock_analyze() has not been called yet.
+	 */
+	for_each_memblock(memory, reg)
+		selected_size += memblock_region_memory_end_pfn(reg) -
+				 memblock_region_memory_base_pfn(reg);
+
+	selected_size = (selected_size * kvm_cma_resv_ratio / 100) << PAGE_SHIFT;
+	if (selected_size) {
+		pr_debug("%s: reserving %ld MiB for global area\n", __func__,
+			 (unsigned long)selected_size / SZ_1M);
+		/*
+		 * Old CPUs require HPT aligned on a multiple of its size. So for them
+		 * make the alignment as max size we could request.
+		 */
+		if (!cpu_has_feature(CPU_FTR_ARCH_206))
+			align_size = __rounddown_pow_of_two(selected_size);
+		else
+			align_size = HPT_ALIGN_PAGES << PAGE_SHIFT;
+
+		align_size = max(kvm_rma_pages << PAGE_SHIFT, align_size);
+		kvm_cma_declare_contiguous(selected_size, align_size);
 	}
-
-	kvm_linear_init_one(kvm_rma_size, kvm_rma_count, KVM_LINEAR_RMA);
 }
diff --git a/arch/powerpc/kvm/book3s_hv_cma.c b/arch/powerpc/kvm/book3s_hv_cma.c
new file mode 100644
index 0000000..d9d3d85
--- /dev/null
+++ b/arch/powerpc/kvm/book3s_hv_cma.c
@@ -0,0 +1,240 @@
+/*
+ * Contiguous Memory Allocator for ppc KVM hash pagetable  based on CMA
+ * for DMA mapping framework
+ *
+ * Copyright IBM Corporation, 2013
+ * Author Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License or (at your optional) any later version of the license.
+ *
+ */
+#define pr_fmt(fmt) "kvm_cma: " fmt
+
+#ifdef CONFIG_CMA_DEBUG
+#ifndef DEBUG
+#  define DEBUG
+#endif
+#endif
+
+#include <linux/memblock.h>
+#include <linux/mutex.h>
+#include <linux/sizes.h>
+#include <linux/slab.h>
+
+#include "book3s_hv_cma.h"
+
+struct kvm_cma {
+	unsigned long	base_pfn;
+	unsigned long	count;
+	unsigned long	*bitmap;
+};
+
+static DEFINE_MUTEX(kvm_cma_mutex);
+static struct kvm_cma kvm_cma_area;
+
+/**
+ * kvm_cma_declare_contiguous() - reserve area for contiguous memory handling
+ *			          for kvm hash pagetable
+ * @size:  Size of the reserved memory.
+ * @alignment:  Alignment for the contiguous memory area
+ *
+ * This function reserves memory for kvm cma area. It should be
+ * called by arch code when early allocator (memblock or bootmem)
+ * is still activate.
+ */
+long __init kvm_cma_declare_contiguous(phys_addr_t size, phys_addr_t alignment)
+{
+	long base_pfn;
+	phys_addr_t addr;
+	struct kvm_cma *cma = &kvm_cma_area;
+
+	pr_debug("%s(size %lx)\n", __func__, (unsigned long)size);
+
+	if (!size)
+		return -EINVAL;
+	/*
+	 * Sanitise input arguments.
+	 * We should be pageblock aligned for CMA.
+	 */
+	alignment = max(alignment, (phys_addr_t)(PAGE_SIZE << pageblock_order));
+	size = ALIGN(size, alignment);
+	/*
+	 * Reserve memory
+	 * Use __memblock_alloc_base() since
+	 * memblock_alloc_base() panic()s.
+	 */
+	addr = __memblock_alloc_base(size, alignment, 0);
+	if (!addr) {
+		base_pfn = -ENOMEM;
+		goto err;
+	} else
+		base_pfn = PFN_DOWN(addr);
+
+	/*
+	 * Each reserved area must be initialised later, when more kernel
+	 * subsystems (like slab allocator) are available.
+	 */
+	cma->base_pfn = base_pfn;
+	cma->count    = size >> PAGE_SHIFT;
+	pr_info("CMA: reserved %ld MiB\n", (unsigned long)size / SZ_1M);
+	return 0;
+err:
+	pr_err("CMA: failed to reserve %ld MiB\n", (unsigned long)size / SZ_1M);
+	return base_pfn;
+}
+
+/**
+ * kvm_alloc_cma() - allocate pages from contiguous area
+ * @nr_pages: Requested number of pages.
+ * @align_pages: Requested alignment in number of pages
+ *
+ * This function allocates memory buffer for hash pagetable.
+ */
+struct page *kvm_alloc_cma(unsigned long nr_pages, unsigned long align_pages)
+{
+	int ret;
+	struct page *page = NULL;
+	struct kvm_cma *cma = &kvm_cma_area;
+	unsigned long chunk_count, nr_chunk;
+	unsigned long mask, pfn, pageno, start = 0;
+
+
+	if (!cma || !cma->count)
+		return NULL;
+
+	pr_debug("%s(cma %p, count %lu, align pages %lu)\n", __func__,
+		 (void *)cma, nr_pages, align_pages);
+
+	if (!nr_pages)
+		return NULL;
+	/*
+	 * align mask with chunk size. The bit tracks pages in chunk size
+	 */
+	VM_BUG_ON(!is_power_of_2(align_pages));
+	mask = (align_pages >> (KVM_CMA_CHUNK_ORDER - PAGE_SHIFT)) - 1;
+	BUILD_BUG_ON(PAGE_SHIFT > KVM_CMA_CHUNK_ORDER);
+
+	chunk_count = cma->count >>  (KVM_CMA_CHUNK_ORDER - PAGE_SHIFT);
+	nr_chunk = nr_pages >> (KVM_CMA_CHUNK_ORDER - PAGE_SHIFT);
+
+	mutex_lock(&kvm_cma_mutex);
+	for (;;) {
+		pageno = bitmap_find_next_zero_area(cma->bitmap, chunk_count,
+						    start, nr_chunk, mask);
+		if (pageno >= chunk_count)
+			break;
+
+		pfn = cma->base_pfn + (pageno << (KVM_CMA_CHUNK_ORDER - PAGE_SHIFT));
+		ret = alloc_contig_range(pfn, pfn + nr_pages, MIGRATE_CMA);
+		if (ret == 0) {
+			bitmap_set(cma->bitmap, pageno, nr_chunk);
+			page = pfn_to_page(pfn);
+			memset(pfn_to_kaddr(pfn), 0, nr_pages << PAGE_SHIFT);
+			break;
+		} else if (ret != -EBUSY) {
+			break;
+		}
+		pr_debug("%s(): memory range at %p is busy, retrying\n",
+			 __func__, pfn_to_page(pfn));
+		/* try again with a bit different memory target */
+		start = pageno + mask + 1;
+	}
+	mutex_unlock(&kvm_cma_mutex);
+	pr_debug("%s(): returned %p\n", __func__, page);
+	return page;
+}
+
+/**
+ * kvm_release_cma() - release allocated pages for hash pagetable
+ * @pages: Allocated pages.
+ * @nr_pages: Number of allocated pages.
+ *
+ * This function releases memory allocated by kvm_alloc_cma().
+ * It returns false when provided pages do not belong to contiguous area and
+ * true otherwise.
+ */
+bool kvm_release_cma(struct page *pages, unsigned long nr_pages)
+{
+	unsigned long pfn;
+	unsigned long nr_chunk;
+	struct kvm_cma *cma = &kvm_cma_area;
+
+	if (!cma || !pages)
+		return false;
+
+	pr_debug("%s(page %p count %lu)\n", __func__, (void *)pages, nr_pages);
+
+	pfn = page_to_pfn(pages);
+
+	if (pfn < cma->base_pfn || pfn >= cma->base_pfn + cma->count)
+		return false;
+
+	VM_BUG_ON(pfn + nr_pages > cma->base_pfn + cma->count);
+	nr_chunk = nr_pages >>  (KVM_CMA_CHUNK_ORDER - PAGE_SHIFT);
+
+	mutex_lock(&kvm_cma_mutex);
+	bitmap_clear(cma->bitmap,
+		     (pfn - cma->base_pfn) >> (KVM_CMA_CHUNK_ORDER - PAGE_SHIFT),
+		     nr_chunk);
+	free_contig_range(pfn, nr_pages);
+	mutex_unlock(&kvm_cma_mutex);
+
+	return true;
+}
+
+static int __init kvm_cma_activate_area(unsigned long base_pfn,
+					unsigned long count)
+{
+	unsigned long pfn = base_pfn;
+	unsigned i = count >> pageblock_order;
+	struct zone *zone;
+
+	WARN_ON_ONCE(!pfn_valid(pfn));
+	zone = page_zone(pfn_to_page(pfn));
+	do {
+		unsigned j;
+		base_pfn = pfn;
+		for (j = pageblock_nr_pages; j; --j, pfn++) {
+			WARN_ON_ONCE(!pfn_valid(pfn));
+			/*
+			 * alloc_contig_range requires the pfn range
+			 * specified to be in the same zone. Make this
+			 * simple by forcing the entire CMA resv range
+			 * to be in the same zone.
+			 */
+			if (page_zone(pfn_to_page(pfn)) != zone)
+				return -EINVAL;
+		}
+		init_cma_reserved_pageblock(pfn_to_page(base_pfn));
+	} while (--i);
+	return 0;
+}
+
+static int __init kvm_cma_init_reserved_areas(void)
+{
+	int bitmap_size, ret;
+	unsigned long chunk_count;
+	struct kvm_cma *cma = &kvm_cma_area;
+
+	pr_debug("%s()\n", __func__);
+	if (!cma->count)
+		return 0;
+	chunk_count = cma->count >> (KVM_CMA_CHUNK_ORDER - PAGE_SHIFT);
+	bitmap_size = BITS_TO_LONGS(chunk_count) * sizeof(long);
+	cma->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
+	if (!cma->bitmap)
+		return -ENOMEM;
+
+	ret = kvm_cma_activate_area(cma->base_pfn, cma->count);
+	if (ret)
+		goto error;
+	return 0;
+
+error:
+	kfree(cma->bitmap);
+	return ret;
+}
+core_initcall(kvm_cma_init_reserved_areas);
diff --git a/arch/powerpc/kvm/book3s_hv_cma.h b/arch/powerpc/kvm/book3s_hv_cma.h
new file mode 100644
index 0000000..655144f
--- /dev/null
+++ b/arch/powerpc/kvm/book3s_hv_cma.h
@@ -0,0 +1,27 @@
+/*
+ * Contiguous Memory Allocator for ppc KVM hash pagetable  based on CMA
+ * for DMA mapping framework
+ *
+ * Copyright IBM Corporation, 2013
+ * Author Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License or (at your optional) any later version of the license.
+ *
+ */
+
+#ifndef __POWERPC_KVM_CMA_ALLOC_H__
+#define __POWERPC_KVM_CMA_ALLOC_H__
+/*
+ * Both RMA and Hash page allocation will be multiple of 256K.
+ */
+#define KVM_CMA_CHUNK_ORDER	18
+
+extern struct page *kvm_alloc_cma(unsigned long nr_pages,
+				  unsigned long align_pages);
+extern bool kvm_release_cma(struct page *pages, unsigned long nr_pages);
+extern long kvm_cma_declare_contiguous(phys_addr_t size,
+				       phys_addr_t alignment) __init;
+#endif
diff --git a/arch/powerpc/kvm/book3s_hv_rm_mmu.c b/arch/powerpc/kvm/book3s_hv_rm_mmu.c
index fc25689..9c51544 100644
--- a/arch/powerpc/kvm/book3s_hv_rm_mmu.c
+++ b/arch/powerpc/kvm/book3s_hv_rm_mmu.c
@@ -363,7 +363,11 @@ long kvmppc_h_enter(struct kvm_vcpu *vcpu, unsigned long flags,
 				 vcpu->arch.pgdir, true, &vcpu->arch.gpr[4]);
 }
 
+#ifdef __BIG_ENDIAN__
 #define LOCK_TOKEN	(*(u32 *)(&get_paca()->lock_token))
+#else
+#define LOCK_TOKEN	(*(u32 *)(&get_paca()->paca_index))
+#endif
 
 static inline int try_lock_tlbie(unsigned int *lock)
 {
@@ -383,6 +387,80 @@ static inline int try_lock_tlbie(unsigned int *lock)
 	return old == 0;
 }
 
+/*
+ * tlbie/tlbiel is a bit different on the PPC970 compared to later
+ * processors such as POWER7; the large page bit is in the instruction
+ * not RB, and the top 16 bits and the bottom 12 bits of the VA
+ * in RB must be 0.
+ */
+static void do_tlbies_970(struct kvm *kvm, unsigned long *rbvalues,
+			  long npages, int global, bool need_sync)
+{
+	long i;
+
+	if (global) {
+		while (!try_lock_tlbie(&kvm->arch.tlbie_lock))
+			cpu_relax();
+		if (need_sync)
+			asm volatile("ptesync" : : : "memory");
+		for (i = 0; i < npages; ++i) {
+			unsigned long rb = rbvalues[i];
+
+			if (rb & 1)		/* large page */
+				asm volatile("tlbie %0,1" : :
+					     "r" (rb & 0x0000fffffffff000ul));
+			else
+				asm volatile("tlbie %0,0" : :
+					     "r" (rb & 0x0000fffffffff000ul));
+		}
+		asm volatile("eieio; tlbsync; ptesync" : : : "memory");
+		kvm->arch.tlbie_lock = 0;
+	} else {
+		if (need_sync)
+			asm volatile("ptesync" : : : "memory");
+		for (i = 0; i < npages; ++i) {
+			unsigned long rb = rbvalues[i];
+
+			if (rb & 1)		/* large page */
+				asm volatile("tlbiel %0,1" : :
+					     "r" (rb & 0x0000fffffffff000ul));
+			else
+				asm volatile("tlbiel %0,0" : :
+					     "r" (rb & 0x0000fffffffff000ul));
+		}
+		asm volatile("ptesync" : : : "memory");
+	}
+}
+
+static void do_tlbies(struct kvm *kvm, unsigned long *rbvalues,
+		      long npages, int global, bool need_sync)
+{
+	long i;
+
+	if (cpu_has_feature(CPU_FTR_ARCH_201)) {
+		/* PPC970 tlbie instruction is a bit different */
+		do_tlbies_970(kvm, rbvalues, npages, global, need_sync);
+		return;
+	}
+	if (global) {
+		while (!try_lock_tlbie(&kvm->arch.tlbie_lock))
+			cpu_relax();
+		if (need_sync)
+			asm volatile("ptesync" : : : "memory");
+		for (i = 0; i < npages; ++i)
+			asm volatile(PPC_TLBIE(%1,%0) : :
+				     "r" (rbvalues[i]), "r" (kvm->arch.lpid));
+		asm volatile("eieio; tlbsync; ptesync" : : : "memory");
+		kvm->arch.tlbie_lock = 0;
+	} else {
+		if (need_sync)
+			asm volatile("ptesync" : : : "memory");
+		for (i = 0; i < npages; ++i)
+			asm volatile("tlbiel %0" : : "r" (rbvalues[i]));
+		asm volatile("ptesync" : : : "memory");
+	}
+}
+
 long kvmppc_do_h_remove(struct kvm *kvm, unsigned long flags,
 			unsigned long pte_index, unsigned long avpn,
 			unsigned long *hpret)
@@ -408,19 +486,7 @@ long kvmppc_do_h_remove(struct kvm *kvm, unsigned long flags,
 	if (v & HPTE_V_VALID) {
 		hpte[0] &= ~HPTE_V_VALID;
 		rb = compute_tlbie_rb(v, hpte[1], pte_index);
-		if (global_invalidates(kvm, flags)) {
-			while (!try_lock_tlbie(&kvm->arch.tlbie_lock))
-				cpu_relax();
-			asm volatile("ptesync" : : : "memory");
-			asm volatile(PPC_TLBIE(%1,%0)"; eieio; tlbsync"
-				     : : "r" (rb), "r" (kvm->arch.lpid));
-			asm volatile("ptesync" : : : "memory");
-			kvm->arch.tlbie_lock = 0;
-		} else {
-			asm volatile("ptesync" : : : "memory");
-			asm volatile("tlbiel %0" : : "r" (rb));
-			asm volatile("ptesync" : : : "memory");
-		}
+		do_tlbies(kvm, &rb, 1, global_invalidates(kvm, flags), true);
 		/* Read PTE low word after tlbie to get final R/C values */
 		remove_revmap_chain(kvm, pte_index, rev, v, hpte[1]);
 	}
@@ -448,12 +514,11 @@ long kvmppc_h_bulk_remove(struct kvm_vcpu *vcpu)
 	unsigned long *hp, *hptes[4], tlbrb[4];
 	long int i, j, k, n, found, indexes[4];
 	unsigned long flags, req, pte_index, rcbits;
-	long int local = 0;
+	int global;
 	long int ret = H_SUCCESS;
 	struct revmap_entry *rev, *revs[4];
 
-	if (atomic_read(&kvm->online_vcpus) == 1)
-		local = 1;
+	global = global_invalidates(kvm, 0);
 	for (i = 0; i < 4 && ret == H_SUCCESS; ) {
 		n = 0;
 		for (; i < 4; ++i) {
@@ -529,22 +594,7 @@ long kvmppc_h_bulk_remove(struct kvm_vcpu *vcpu)
 			break;
 
 		/* Now that we've collected a batch, do the tlbies */
-		if (!local) {
-			while(!try_lock_tlbie(&kvm->arch.tlbie_lock))
-				cpu_relax();
-			asm volatile("ptesync" : : : "memory");
-			for (k = 0; k < n; ++k)
-				asm volatile(PPC_TLBIE(%1,%0) : :
-					     "r" (tlbrb[k]),
-					     "r" (kvm->arch.lpid));
-			asm volatile("eieio; tlbsync; ptesync" : : : "memory");
-			kvm->arch.tlbie_lock = 0;
-		} else {
-			asm volatile("ptesync" : : : "memory");
-			for (k = 0; k < n; ++k)
-				asm volatile("tlbiel %0" : : "r" (tlbrb[k]));
-			asm volatile("ptesync" : : : "memory");
-		}
+		do_tlbies(kvm, tlbrb, n, global, true);
 
 		/* Read PTE low words after tlbie to get final R/C values */
 		for (k = 0; k < n; ++k) {
@@ -603,19 +653,7 @@ long kvmppc_h_protect(struct kvm_vcpu *vcpu, unsigned long flags,
 	if (v & HPTE_V_VALID) {
 		rb = compute_tlbie_rb(v, r, pte_index);
 		hpte[0] = v & ~HPTE_V_VALID;
-		if (global_invalidates(kvm, flags)) {
-			while(!try_lock_tlbie(&kvm->arch.tlbie_lock))
-				cpu_relax();
-			asm volatile("ptesync" : : : "memory");
-			asm volatile(PPC_TLBIE(%1,%0)"; eieio; tlbsync"
-				     : : "r" (rb), "r" (kvm->arch.lpid));
-			asm volatile("ptesync" : : : "memory");
-			kvm->arch.tlbie_lock = 0;
-		} else {
-			asm volatile("ptesync" : : : "memory");
-			asm volatile("tlbiel %0" : : "r" (rb));
-			asm volatile("ptesync" : : : "memory");
-		}
+		do_tlbies(kvm, &rb, 1, global_invalidates(kvm, flags), true);
 		/*
 		 * If the host has this page as readonly but the guest
 		 * wants to make it read/write, reduce the permissions.
@@ -686,13 +724,7 @@ void kvmppc_invalidate_hpte(struct kvm *kvm, unsigned long *hptep,
 
 	hptep[0] &= ~HPTE_V_VALID;
 	rb = compute_tlbie_rb(hptep[0], hptep[1], pte_index);
-	while (!try_lock_tlbie(&kvm->arch.tlbie_lock))
-		cpu_relax();
-	asm volatile("ptesync" : : : "memory");
-	asm volatile(PPC_TLBIE(%1,%0)"; eieio; tlbsync"
-		     : : "r" (rb), "r" (kvm->arch.lpid));
-	asm volatile("ptesync" : : : "memory");
-	kvm->arch.tlbie_lock = 0;
+	do_tlbies(kvm, &rb, 1, 1, true);
 }
 EXPORT_SYMBOL_GPL(kvmppc_invalidate_hpte);
 
@@ -706,12 +738,7 @@ void kvmppc_clear_ref_hpte(struct kvm *kvm, unsigned long *hptep,
 	rbyte = (hptep[1] & ~HPTE_R_R) >> 8;
 	/* modify only the second-last byte, which contains the ref bit */
 	*((char *)hptep + 14) = rbyte;
-	while (!try_lock_tlbie(&kvm->arch.tlbie_lock))
-		cpu_relax();
-	asm volatile(PPC_TLBIE(%1,%0)"; eieio; tlbsync"
-		     : : "r" (rb), "r" (kvm->arch.lpid));
-	asm volatile("ptesync" : : : "memory");
-	kvm->arch.tlbie_lock = 0;
+	do_tlbies(kvm, &rb, 1, 1, false);
 }
 EXPORT_SYMBOL_GPL(kvmppc_clear_ref_hpte);
 
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index b02f91e..c71103b 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -29,6 +29,10 @@
 #include <asm/kvm_book3s_asm.h>
 #include <asm/mmu-hash64.h>
 
+#ifdef __LITTLE_ENDIAN__
+#error Need to fix lppaca and SLB shadow accesses in little endian mode
+#endif
+
 /*****************************************************************************
  *                                                                           *
  *        Real Mode handlers that need to be in the linear mapping           *
@@ -389,7 +393,11 @@ toc_tlbie_lock:
 	.tc	native_tlbie_lock[TC],native_tlbie_lock
 	.previous
 	ld	r3,toc_tlbie_lock@toc(2)
+#ifdef __BIG_ENDIAN__
 	lwz	r8,PACA_LOCK_TOKEN(r13)
+#else
+	lwz	r8,PACAPACAINDEX(r13)
+#endif
 24:	lwarx	r0,0,r3
 	cmpwi	r0,0
 	bne	24b
@@ -964,7 +972,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
 32:	ld	r4,VCPU_KVM(r9)		/* pointer to struct kvm */
 
 	/* Take the guest's tlbie_lock */
+#ifdef __BIG_ENDIAN__
 	lwz	r8,PACA_LOCK_TOKEN(r13)
+#else
+	lwz	r8,PACAPACAINDEX(r13)
+#endif
 	addi	r3,r4,KVM_TLBIE_LOCK
 24:	lwarx	r0,0,r3
 	cmpwi	r0,0
@@ -1054,7 +1066,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206)
 BEGIN_FTR_SECTION
 	mfspr	r8, SPRN_DSCR
 	ld	r7, HSTATE_DSCR(r13)
-	std	r8, VCPU_DSCR(r7)
+	std	r8, VCPU_DSCR(r9)
 	mtspr	SPRN_DSCR, r7
 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206)
 
@@ -1381,7 +1393,7 @@ hcall_try_real_mode:
 	cmpldi	r3,hcall_real_table_end - hcall_real_table
 	bge	guest_exit_cont
 	LOAD_REG_ADDR(r4, hcall_real_table)
-	lwzx	r3,r3,r4
+	lwax	r3,r3,r4
 	cmpwi	r3,0
 	beq	guest_exit_cont
 	add	r3,r3,r4
diff --git a/arch/powerpc/kvm/book3s_interrupts.S b/arch/powerpc/kvm/book3s_interrupts.S
index 48cbbf8..17cfae5 100644
--- a/arch/powerpc/kvm/book3s_interrupts.S
+++ b/arch/powerpc/kvm/book3s_interrupts.S
@@ -92,6 +92,11 @@ kvm_start_lightweight:
 	PPC_LL	r3, VCPU_HFLAGS(r4)
 	rldicl	r3, r3, 0, 63		/* r3 &= 1 */
 	stb	r3, HSTATE_RESTORE_HID5(r13)
+
+	/* Load up guest SPRG3 value, since it's user readable */
+	ld	r3, VCPU_SHARED(r4)
+	ld	r3, VCPU_SHARED_SPRG3(r3)
+	mtspr	SPRN_SPRG3, r3
 #endif /* CONFIG_PPC_BOOK3S_64 */
 
 	PPC_LL	r4, VCPU_SHADOW_MSR(r4)	/* get shadow_msr */
@@ -123,6 +128,15 @@ kvmppc_handler_highmem:
 	/* R7 = vcpu */
 	PPC_LL	r7, GPR4(r1)
 
+#ifdef CONFIG_PPC_BOOK3S_64
+	/*
+	 * Reload kernel SPRG3 value.
+	 * No need to save guest value as usermode can't modify SPRG3.
+	 */
+	ld	r3, PACA_SPRG3(r13)
+	mtspr	SPRN_SPRG3, r3
+#endif /* CONFIG_PPC_BOOK3S_64 */
+
 	PPC_STL	r14, VCPU_GPR(R14)(r7)
 	PPC_STL	r15, VCPU_GPR(R15)(r7)
 	PPC_STL	r16, VCPU_GPR(R16)(r7)
diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c
index c6e13d9..27db1e6 100644
--- a/arch/powerpc/kvm/book3s_pr.c
+++ b/arch/powerpc/kvm/book3s_pr.c
@@ -468,7 +468,8 @@ void kvmppc_giveup_ext(struct kvm_vcpu *vcpu, ulong msr)
 		 * both the traditional FP registers and the added VSX
 		 * registers into thread.fpr[].
 		 */
-		giveup_fpu(current);
+		if (current->thread.regs->msr & MSR_FP)
+			giveup_fpu(current);
 		for (i = 0; i < ARRAY_SIZE(vcpu->arch.fpr); i++)
 			vcpu_fpr[i] = thread_fpr[get_fpr_index(i)];
 
@@ -483,7 +484,8 @@ void kvmppc_giveup_ext(struct kvm_vcpu *vcpu, ulong msr)
 
 #ifdef CONFIG_ALTIVEC
 	if (msr & MSR_VEC) {
-		giveup_altivec(current);
+		if (current->thread.regs->msr & MSR_VEC)
+			giveup_altivec(current);
 		memcpy(vcpu->arch.vr, t->vr, sizeof(vcpu->arch.vr));
 		vcpu->arch.vscr = t->vscr;
 	}
@@ -575,8 +577,6 @@ static int kvmppc_handle_ext(struct kvm_vcpu *vcpu, unsigned int exit_nr,
 	printk(KERN_INFO "Loading up ext 0x%lx\n", msr);
 #endif
 
-	current->thread.regs->msr |= msr;
-
 	if (msr & MSR_FP) {
 		for (i = 0; i < ARRAY_SIZE(vcpu->arch.fpr); i++)
 			thread_fpr[get_fpr_index(i)] = vcpu_fpr[i];
@@ -598,12 +598,32 @@ static int kvmppc_handle_ext(struct kvm_vcpu *vcpu, unsigned int exit_nr,
 #endif
 	}
 
+	current->thread.regs->msr |= msr;
 	vcpu->arch.guest_owned_ext |= msr;
 	kvmppc_recalc_shadow_msr(vcpu);
 
 	return RESUME_GUEST;
 }
 
+/*
+ * Kernel code using FP or VMX could have flushed guest state to
+ * the thread_struct; if so, get it back now.
+ */
+static void kvmppc_handle_lost_ext(struct kvm_vcpu *vcpu)
+{
+	unsigned long lost_ext;
+
+	lost_ext = vcpu->arch.guest_owned_ext & ~current->thread.regs->msr;
+	if (!lost_ext)
+		return;
+
+	if (lost_ext & MSR_FP)
+		kvmppc_load_up_fpu();
+	if (lost_ext & MSR_VEC)
+		kvmppc_load_up_altivec();
+	current->thread.regs->msr |= lost_ext;
+}
+
 int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
                        unsigned int exit_nr)
 {
@@ -772,7 +792,7 @@ program_interrupt:
 	}
 	case BOOK3S_INTERRUPT_SYSCALL:
 		if (vcpu->arch.papr_enabled &&
-		    (kvmppc_get_last_inst(vcpu) == 0x44000022) &&
+		    (kvmppc_get_last_sc(vcpu) == 0x44000022) &&
 		    !(vcpu->arch.shared->msr & MSR_PR)) {
 			/* SC 1 papr hypercalls */
 			ulong cmd = kvmppc_get_gpr(vcpu, 3);
@@ -890,8 +910,9 @@ program_interrupt:
 			local_irq_enable();
 			r = s;
 		} else {
-			kvmppc_lazy_ee_enable();
+			kvmppc_fix_ee_before_entry();
 		}
+		kvmppc_handle_lost_ext(vcpu);
 	}
 
 	trace_kvm_book3s_reenter(r, vcpu);
@@ -1162,7 +1183,7 @@ int kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 	if (vcpu->arch.shared->msr & MSR_FP)
 		kvmppc_handle_ext(vcpu, BOOK3S_INTERRUPT_FP_UNAVAIL, MSR_FP);
 
-	kvmppc_lazy_ee_enable();
+	kvmppc_fix_ee_before_entry();
 
 	ret = __kvmppc_vcpu_run(kvm_run, vcpu);
 
diff --git a/arch/powerpc/kvm/book3s_xics.c b/arch/powerpc/kvm/book3s_xics.c
index 94c1dd4..a3a5cb8 100644
--- a/arch/powerpc/kvm/book3s_xics.c
+++ b/arch/powerpc/kvm/book3s_xics.c
@@ -19,6 +19,7 @@
 #include <asm/hvcall.h>
 #include <asm/xics.h>
 #include <asm/debug.h>
+#include <asm/time.h>
 
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index dcc94f0..17722d8 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -674,8 +674,6 @@ int kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 		goto out;
 	}
 
-	kvm_guest_enter();
-
 #ifdef CONFIG_PPC_FPU
 	/* Save userspace FPU state in stack */
 	enable_kernel_fp();
@@ -698,7 +696,7 @@ int kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 	kvmppc_load_guest_fp(vcpu);
 #endif
 
-	kvmppc_lazy_ee_enable();
+	kvmppc_fix_ee_before_entry();
 
 	ret = __kvmppc_vcpu_run(kvm_run, vcpu);
 
@@ -1168,7 +1166,7 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 			local_irq_enable();
 			r = (s << 2) | RESUME_HOST | (r & RESUME_FLAG_NV);
 		} else {
-			kvmppc_lazy_ee_enable();
+			kvmppc_fix_ee_before_entry();
 		}
 	}
 
diff --git a/arch/powerpc/kvm/e500_mmu_host.c b/arch/powerpc/kvm/e500_mmu_host.c
index 1c6a9d72..c65593a 100644
--- a/arch/powerpc/kvm/e500_mmu_host.c
+++ b/arch/powerpc/kvm/e500_mmu_host.c
@@ -332,6 +332,13 @@ static inline int kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500,
 	unsigned long hva;
 	int pfnmap = 0;
 	int tsize = BOOK3E_PAGESZ_4K;
+	int ret = 0;
+	unsigned long mmu_seq;
+	struct kvm *kvm = vcpu_e500->vcpu.kvm;
+
+	/* used to check for invalidations in progress */
+	mmu_seq = kvm->mmu_notifier_seq;
+	smp_rmb();
 
 	/*
 	 * Translate guest physical to true physical, acquiring
@@ -449,6 +456,12 @@ static inline int kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500,
 		gvaddr &= ~((tsize_pages << PAGE_SHIFT) - 1);
 	}
 
+	spin_lock(&kvm->mmu_lock);
+	if (mmu_notifier_retry(kvm, mmu_seq)) {
+		ret = -EAGAIN;
+		goto out;
+	}
+
 	kvmppc_e500_ref_setup(ref, gtlbe, pfn);
 
 	kvmppc_e500_setup_stlbe(&vcpu_e500->vcpu, gtlbe, tsize,
@@ -457,10 +470,13 @@ static inline int kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500,
 	/* Clear i-cache for new pages */
 	kvmppc_mmu_flush_icache(pfn);
 
+out:
+	spin_unlock(&kvm->mmu_lock);
+
 	/* Drop refcount on page, so that mmu notifiers can clear it */
 	kvm_release_pfn_clean(pfn);
 
-	return 0;
+	return ret;
 }
 
 /* XXX only map the one-one case, for now use TLB0 */
diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c
index 2c52ada..751cd45 100644
--- a/arch/powerpc/kvm/emulate.c
+++ b/arch/powerpc/kvm/emulate.c
@@ -30,53 +30,10 @@
 #include <asm/byteorder.h>
 #include <asm/kvm_ppc.h>
 #include <asm/disassemble.h>
+#include <asm/ppc-opcode.h>
 #include "timing.h"
 #include "trace.h"
 
-#define OP_TRAP 3
-#define OP_TRAP_64 2
-
-#define OP_31_XOP_TRAP      4
-#define OP_31_XOP_LWZX      23
-#define OP_31_XOP_DCBST     54
-#define OP_31_XOP_TRAP_64   68
-#define OP_31_XOP_DCBF      86
-#define OP_31_XOP_LBZX      87
-#define OP_31_XOP_STWX      151
-#define OP_31_XOP_STBX      215
-#define OP_31_XOP_LBZUX     119
-#define OP_31_XOP_STBUX     247
-#define OP_31_XOP_LHZX      279
-#define OP_31_XOP_LHZUX     311
-#define OP_31_XOP_MFSPR     339
-#define OP_31_XOP_LHAX      343
-#define OP_31_XOP_STHX      407
-#define OP_31_XOP_STHUX     439
-#define OP_31_XOP_MTSPR     467
-#define OP_31_XOP_DCBI      470
-#define OP_31_XOP_LWBRX     534
-#define OP_31_XOP_TLBSYNC   566
-#define OP_31_XOP_STWBRX    662
-#define OP_31_XOP_LHBRX     790
-#define OP_31_XOP_STHBRX    918
-
-#define OP_LWZ  32
-#define OP_LD   58
-#define OP_LWZU 33
-#define OP_LBZ  34
-#define OP_LBZU 35
-#define OP_STW  36
-#define OP_STWU 37
-#define OP_STD  62
-#define OP_STB  38
-#define OP_STBU 39
-#define OP_LHZ  40
-#define OP_LHZU 41
-#define OP_LHA  42
-#define OP_LHAU 43
-#define OP_STH  44
-#define OP_STHU 45
-
 void kvmppc_emulate_dec(struct kvm_vcpu *vcpu)
 {
 	unsigned long dec_nsec;
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 6316ee3..07c0106 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -117,8 +117,6 @@ int kvmppc_prepare_to_enter(struct kvm_vcpu *vcpu)
 			kvm_guest_exit();
 			continue;
 		}
-
-		trace_hardirqs_on();
 #endif
 
 		kvm_guest_enter();
@@ -420,6 +418,10 @@ int kvm_arch_create_memslot(struct kvm_memory_slot *slot, unsigned long npages)
 	return kvmppc_core_create_memslot(slot, npages);
 }
 
+void kvm_arch_memslots_updated(struct kvm *kvm)
+{
+}
+
 int kvm_arch_prepare_memory_region(struct kvm *kvm,
 				   struct kvm_memory_slot *memslot,
 				   struct kvm_userspace_memory_region *mem,
@@ -823,39 +825,39 @@ static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu,
 #endif
 #ifdef CONFIG_KVM_MPIC
 	case KVM_CAP_IRQ_MPIC: {
-		struct file *filp;
+		struct fd f;
 		struct kvm_device *dev;
 
 		r = -EBADF;
-		filp = fget(cap->args[0]);
-		if (!filp)
+		f = fdget(cap->args[0]);
+		if (!f.file)
 			break;
 
 		r = -EPERM;
-		dev = kvm_device_from_filp(filp);
+		dev = kvm_device_from_filp(f.file);
 		if (dev)
 			r = kvmppc_mpic_connect_vcpu(dev, vcpu, cap->args[1]);
 
-		fput(filp);
+		fdput(f);
 		break;
 	}
 #endif
 #ifdef CONFIG_KVM_XICS
 	case KVM_CAP_IRQ_XICS: {
-		struct file *filp;
+		struct fd f;
 		struct kvm_device *dev;
 
 		r = -EBADF;
-		filp = fget(cap->args[0]);
-		if (!filp)
+		f = fdget(cap->args[0]);
+		if (!f.file)
 			break;
 
 		r = -EPERM;
-		dev = kvm_device_from_filp(filp);
+		dev = kvm_device_from_filp(f.file);
 		if (dev)
 			r = kvmppc_xics_connect_vcpu(dev, vcpu, cap->args[1]);
 
-		fput(filp);
+		fdput(f);
 		break;
 	}
 #endif /* CONFIG_KVM_XICS */
diff --git a/arch/powerpc/lib/checksum_64.S b/arch/powerpc/lib/checksum_64.S
index 167f725..57a0720 100644
--- a/arch/powerpc/lib/checksum_64.S
+++ b/arch/powerpc/lib/checksum_64.S
@@ -226,19 +226,35 @@ _GLOBAL(csum_partial)
 	blr
 
 
-	.macro source
+	.macro srcnr
 100:
 	.section __ex_table,"a"
 	.align 3
-	.llong 100b,.Lsrc_error
+	.llong 100b,.Lsrc_error_nr
 	.previous
 	.endm
 
-	.macro dest
+	.macro source
+150:
+	.section __ex_table,"a"
+	.align 3
+	.llong 150b,.Lsrc_error
+	.previous
+	.endm
+
+	.macro dstnr
 200:
 	.section __ex_table,"a"
 	.align 3
-	.llong 200b,.Ldest_error
+	.llong 200b,.Ldest_error_nr
+	.previous
+	.endm
+
+	.macro dest
+250:
+	.section __ex_table,"a"
+	.align 3
+	.llong 250b,.Ldest_error
 	.previous
 	.endm
 
@@ -269,16 +285,16 @@ _GLOBAL(csum_partial_copy_generic)
 	rldicl. r6,r3,64-1,64-2		/* r6 = (r3 & 0x3) >> 1 */
 	beq	.Lcopy_aligned
 
-	li	r7,4
-	sub	r6,r7,r6
+	li	r9,4
+	sub	r6,r9,r6
 	mtctr	r6
 
 1:
-source;	lhz	r6,0(r3)		/* align to doubleword */
+srcnr;	lhz	r6,0(r3)		/* align to doubleword */
 	subi	r5,r5,2
 	addi	r3,r3,2
 	adde	r0,r0,r6
-dest;	sth	r6,0(r4)
+dstnr;	sth	r6,0(r4)
 	addi	r4,r4,2
 	bdnz	1b
 
@@ -392,10 +408,10 @@ dest;	std	r16,56(r4)
 
 	mtctr	r6
 3:
-source;	ld	r6,0(r3)
+srcnr;	ld	r6,0(r3)
 	addi	r3,r3,8
 	adde	r0,r0,r6
-dest;	std	r6,0(r4)
+dstnr;	std	r6,0(r4)
 	addi	r4,r4,8
 	bdnz	3b
 
@@ -405,10 +421,10 @@ dest;	std	r6,0(r4)
 	srdi.	r6,r5,2
 	beq	.Lcopy_tail_halfword
 
-source;	lwz	r6,0(r3)
+srcnr;	lwz	r6,0(r3)
 	addi	r3,r3,4
 	adde	r0,r0,r6
-dest;	stw	r6,0(r4)
+dstnr;	stw	r6,0(r4)
 	addi	r4,r4,4
 	subi	r5,r5,4
 
@@ -416,10 +432,10 @@ dest;	stw	r6,0(r4)
 	srdi.	r6,r5,1
 	beq	.Lcopy_tail_byte
 
-source;	lhz	r6,0(r3)
+srcnr;	lhz	r6,0(r3)
 	addi	r3,r3,2
 	adde	r0,r0,r6
-dest;	sth	r6,0(r4)
+dstnr;	sth	r6,0(r4)
 	addi	r4,r4,2
 	subi	r5,r5,2
 
@@ -427,10 +443,10 @@ dest;	sth	r6,0(r4)
 	andi.	r6,r5,1
 	beq	.Lcopy_finish
 
-source;	lbz	r6,0(r3)
+srcnr;	lbz	r6,0(r3)
 	sldi	r9,r6,8			/* Pad the byte out to 16 bits */
 	adde	r0,r0,r9
-dest;	stb	r6,0(r4)
+dstnr;	stb	r6,0(r4)
 
 .Lcopy_finish:
 	addze	r0,r0			/* add in final carry */
@@ -440,6 +456,11 @@ dest;	stb	r6,0(r4)
 	blr
 
 .Lsrc_error:
+	ld	r14,STK_REG(R14)(r1)
+	ld	r15,STK_REG(R15)(r1)
+	ld	r16,STK_REG(R16)(r1)
+	addi	r1,r1,STACKFRAMESIZE
+.Lsrc_error_nr:
 	cmpdi	0,r7,0
 	beqlr
 	li	r6,-EFAULT
@@ -447,6 +468,11 @@ dest;	stb	r6,0(r4)
 	blr
 
 .Ldest_error:
+	ld	r14,STK_REG(R14)(r1)
+	ld	r15,STK_REG(R15)(r1)
+	ld	r16,STK_REG(R16)(r1)
+	addi	r1,r1,STACKFRAMESIZE
+.Ldest_error_nr:
 	cmpdi	0,r8,0
 	beqlr
 	li	r6,-EFAULT
diff --git a/arch/powerpc/lib/locks.c b/arch/powerpc/lib/locks.c
index bb7cfec..0c9c8d7 100644
--- a/arch/powerpc/lib/locks.c
+++ b/arch/powerpc/lib/locks.c
@@ -32,7 +32,7 @@ void __spin_yield(arch_spinlock_t *lock)
 		return;
 	holder_cpu = lock_value & 0xffff;
 	BUG_ON(holder_cpu >= NR_CPUS);
-	yield_count = lppaca_of(holder_cpu).yield_count;
+	yield_count = be32_to_cpu(lppaca_of(holder_cpu).yield_count);
 	if ((yield_count & 1) == 0)
 		return;		/* virtual cpu is currently running */
 	rmb();
@@ -57,7 +57,7 @@ void __rw_yield(arch_rwlock_t *rw)
 		return;		/* no write lock at present */
 	holder_cpu = lock_value & 0xffff;
 	BUG_ON(holder_cpu >= NR_CPUS);
-	yield_count = lppaca_of(holder_cpu).yield_count;
+	yield_count = be32_to_cpu(lppaca_of(holder_cpu).yield_count);
 	if ((yield_count & 1) == 0)
 		return;		/* virtual cpu is currently running */
 	rmb();
diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c
index 99c7fc1..b1faa15 100644
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -100,8 +100,10 @@ static unsigned long __kprobes dform_ea(unsigned int instr, struct pt_regs *regs
 	ea = (signed short) instr;		/* sign-extend */
 	if (ra) {
 		ea += regs->gpr[ra];
-		if (instr & 0x04000000)		/* update forms */
-			regs->gpr[ra] = ea;
+		if (instr & 0x04000000) {		/* update forms */
+			if ((instr>>26) != 47) 		/* stmw is not an update form */
+				regs->gpr[ra] = ea;
+		}
 	}
 
 	return truncate_if_32bit(regs->msr, ea);
@@ -279,7 +281,7 @@ static int __kprobes write_mem_unaligned(unsigned long val, unsigned long ea,
 		err = write_mem_aligned(val >> (nb - c) * 8, ea, c);
 		if (err)
 			return err;
-		++ea;
+		ea += c;
 	}
 	return 0;
 }
@@ -1503,6 +1505,7 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
 		 */
 		if ((ra == 1) && !(regs->msr & MSR_PR) \
 			&& (val3 >= (regs->gpr[1] - STACK_INT_FRAME_SIZE))) {
+#ifdef CONFIG_PPC32
 			/*
 			 * Check if we will touch kernel sack overflow
 			 */
@@ -1511,7 +1514,7 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
 				err = -EINVAL;
 				break;
 			}
-
+#endif /* CONFIG_PPC32 */
 			/*
 			 * Check if we already set since that means we'll
 			 * lose the previous value.
diff --git a/arch/powerpc/math-emu/Makefile b/arch/powerpc/math-emu/Makefile
index 8d035d2..1b46ab4 100644
--- a/arch/powerpc/math-emu/Makefile
+++ b/arch/powerpc/math-emu/Makefile
@@ -1,15 +1,15 @@
-
-obj-$(CONFIG_MATH_EMULATION)	+= fabs.o fadd.o fadds.o fcmpo.o fcmpu.o \
-					fctiw.o fctiwz.o fdiv.o fdivs.o \
-					fmadd.o fmadds.o fmsub.o fmsubs.o \
-					fmul.o fmuls.o fnabs.o fneg.o \
-					fnmadd.o fnmadds.o fnmsub.o fnmsubs.o \
-					fres.o fre.o frsp.o fsel.o lfs.o \
-					frsqrte.o frsqrtes.o \
-					fsqrt.o	fsqrts.o fsub.o fsubs.o \
-					mcrfs.o mffs.o mtfsb0.o mtfsb1.o \
-					mtfsf.o mtfsfi.o stfiwx.o stfs.o \
-					math.o fmr.o lfd.o stfd.o
+math-emu-common-objs = math.o fre.o fsqrt.o fsqrts.o frsqrtes.o mtfsf.o mtfsfi.o
+obj-$(CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED) += $(math-emu-common-objs)
+obj-$(CONFIG_MATH_EMULATION_FULL) += $(math-emu-common-objs) fabs.o fadd.o \
+					fadds.o fcmpo.o fcmpu.o fctiw.o \
+					fctiwz.o fdiv.o fdivs.o  fmadd.o \
+					fmadds.o fmsub.o fmsubs.o fmul.o \
+					fmuls.o fnabs.o fneg.o fnmadd.o \
+					fnmadds.o fnmsub.o fnmsubs.o fres.o \
+					frsp.o fsel.o lfs.o frsqrte.o fsub.o \
+					fsubs.o  mcrfs.o mffs.o mtfsb0.o \
+					mtfsb1.o stfiwx.o stfs.o math.o \
+					fmr.o lfd.o stfd.o
 
 obj-$(CONFIG_SPE)		+= math_efp.o
 
diff --git a/arch/powerpc/math-emu/math.c b/arch/powerpc/math-emu/math.c
index 0328e66..ab151f0 100644
--- a/arch/powerpc/math-emu/math.c
+++ b/arch/powerpc/math-emu/math.c
@@ -7,12 +7,27 @@
 
 #include <asm/uaccess.h>
 #include <asm/reg.h>
+#include <asm/switch_to.h>
 
 #include <asm/sfp-machine.h>
 #include <math-emu/double.h>
 
 #define FLOATFUNC(x)	extern int x(void *, void *, void *, void *)
 
+/* The instructions list which may be not implemented by a hardware FPU */
+FLOATFUNC(fre);
+FLOATFUNC(frsqrtes);
+FLOATFUNC(fsqrt);
+FLOATFUNC(fsqrts);
+FLOATFUNC(mtfsf);
+FLOATFUNC(mtfsfi);
+
+#ifdef CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED
+#undef FLOATFUNC(x)
+#define FLOATFUNC(x)	static inline int x(void *op1, void *op2, void *op3, \
+						 void *op4) { }
+#endif
+
 FLOATFUNC(fadd);
 FLOATFUNC(fadds);
 FLOATFUNC(fdiv);
@@ -42,8 +57,6 @@ FLOATFUNC(mcrfs);
 FLOATFUNC(mffs);
 FLOATFUNC(mtfsb0);
 FLOATFUNC(mtfsb1);
-FLOATFUNC(mtfsf);
-FLOATFUNC(mtfsfi);
 
 FLOATFUNC(lfd);
 FLOATFUNC(lfs);
@@ -58,13 +71,9 @@ FLOATFUNC(fnabs);
 FLOATFUNC(fneg);
 
 /* Optional */
-FLOATFUNC(fre);
 FLOATFUNC(fres);
 FLOATFUNC(frsqrte);
-FLOATFUNC(frsqrtes);
 FLOATFUNC(fsel);
-FLOATFUNC(fsqrt);
-FLOATFUNC(fsqrts);
 
 
 #define OP31		0x1f		/*   31 */
@@ -154,7 +163,6 @@ FLOATFUNC(fsqrts);
 #define XEU	15
 #define XFLB	10
 
-#ifdef CONFIG_MATH_EMULATION
 static int
 record_exception(struct pt_regs *regs, int eflag)
 {
@@ -212,7 +220,6 @@ record_exception(struct pt_regs *regs, int eflag)
 
 	return (fpscr & FPSCR_FEX) ? 1 : 0;
 }
-#endif /* CONFIG_MATH_EMULATION */
 
 int
 do_mathemu(struct pt_regs *regs)
@@ -222,56 +229,13 @@ do_mathemu(struct pt_regs *regs)
 	signed short sdisp;
 	u32 insn = 0;
 	int idx = 0;
-#ifdef CONFIG_MATH_EMULATION
 	int (*func)(void *, void *, void *, void *);
 	int type = 0;
 	int eflag, trap;
-#endif
 
 	if (get_user(insn, (u32 *)pc))
 		return -EFAULT;
 
-#ifndef CONFIG_MATH_EMULATION
-	switch (insn >> 26) {
-	case LFD:
-		idx = (insn >> 16) & 0x1f;
-		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
-		op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp);
-		lfd(op0, op1, op2, op3);
-		break;
-	case LFDU:
-		idx = (insn >> 16) & 0x1f;
-		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
-		op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp);
-		lfd(op0, op1, op2, op3);
-		regs->gpr[idx] = (unsigned long)op1;
-		break;
-	case STFD:
-		idx = (insn >> 16) & 0x1f;
-		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
-		op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp);
-		stfd(op0, op1, op2, op3);
-		break;
-	case STFDU:
-		idx = (insn >> 16) & 0x1f;
-		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
-		op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp);
-		stfd(op0, op1, op2, op3);
-		regs->gpr[idx] = (unsigned long)op1;
-		break;
-	case OP63:
-		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
-		op1 = (void *)&current->thread.TS_FPR((insn >> 11) & 0x1f);
-		fmr(op0, op1, op2, op3);
-		break;
-	default:
-		goto illegal;
-	}
-#else /* CONFIG_MATH_EMULATION */
 	switch (insn >> 26) {
 	case LFS:	func = lfs;	type = D;	break;
 	case LFSU:	func = lfs;	type = DU;	break;
@@ -416,21 +380,16 @@ do_mathemu(struct pt_regs *regs)
 	case XE:
 		idx = (insn >> 16) & 0x1f;
 		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
-		if (!idx) {
-			if (((insn >> 1) & 0x3ff) == STFIWX)
-				op1 = (void *)(regs->gpr[(insn >> 11) & 0x1f]);
-			else
-				goto illegal;
-		} else {
-			op1 = (void *)(regs->gpr[idx] + regs->gpr[(insn >> 11) & 0x1f]);
-		}
-
+		op1 = (void *)((idx ? regs->gpr[idx] : 0)
+				+ regs->gpr[(insn >> 11) & 0x1f]);
 		break;
 
 	case XEU:
 		idx = (insn >> 16) & 0x1f;
+		if (!idx)
+			goto illegal;
 		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
-		op1 = (void *)((idx ? regs->gpr[idx] : 0)
+		op1 = (void *)(regs->gpr[idx]
 				+ regs->gpr[(insn >> 11) & 0x1f]);
 		break;
 
@@ -465,6 +424,13 @@ do_mathemu(struct pt_regs *regs)
 		goto illegal;
 	}
 
+	/*
+	 * If we support a HW FPU, we need to ensure the FP state
+	 * is flushed into the thread_struct before attempting
+	 * emulation
+	 */
+	flush_fp_to_thread(current);
+
 	eflag = func(op0, op1, op2, op3);
 
 	if (insn & 1) {
@@ -485,7 +451,6 @@ do_mathemu(struct pt_regs *regs)
 	default:
 		break;
 	}
-#endif /* CONFIG_MATH_EMULATION */
 
 	regs->nip += 4;
 	return 0;
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 8726779..51ab9e7 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -206,7 +206,7 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address,
 	int trap = TRAP(regs);
  	int is_exec = trap == 0x400;
 	int fault;
-	int rc = 0;
+	int rc = 0, store_update_sp = 0;
 
 #if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
 	/*
@@ -223,9 +223,6 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address,
 	is_write = error_code & ESR_DST;
 #endif /* CONFIG_4xx || CONFIG_BOOKE */
 
-	if (is_write)
-		flags |= FAULT_FLAG_WRITE;
-
 #ifdef CONFIG_PPC_ICSWX
 	/*
 	 * we need to do this early because this "data storage
@@ -280,6 +277,17 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address,
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 
+	/*
+	 * We want to do this outside mmap_sem, because reading code around nip
+	 * can result in fault, which will cause a deadlock when called with
+	 * mmap_sem held
+	 */
+	if (user_mode(regs))
+		store_update_sp = store_updates_sp(regs);
+
+	if (user_mode(regs))
+		flags |= FAULT_FLAG_USER;
+
 	/* When running in the kernel we expect faults to occur only to
 	 * addresses in user space.  All other faults represent errors in the
 	 * kernel and should generate an OOPS.  Unfortunately, in the case of an
@@ -345,8 +353,7 @@ retry:
 		 * between the last mapped region and the stack will
 		 * expand the stack rather than segfaulting.
 		 */
-		if (address + 2048 < uregs->gpr[1]
-		    && (!user_mode(regs) || !store_updates_sp(regs)))
+		if (address + 2048 < uregs->gpr[1] && !store_update_sp)
 			goto bad_area;
 	}
 	if (expand_stack(vma, address))
@@ -408,6 +415,7 @@ good_area:
 	} else if (is_write) {
 		if (!(vma->vm_flags & VM_WRITE))
 			goto bad_area;
+		flags |= FAULT_FLAG_WRITE;
 	/* a read */
 	} else {
 		/* protection fault */
@@ -443,8 +451,12 @@ good_area:
 				      regs, address);
 #ifdef CONFIG_PPC_SMLPAR
 			if (firmware_has_feature(FW_FEATURE_CMO)) {
+				u32 page_ins;
+
 				preempt_disable();
-				get_lppaca()->page_ins += (1 << PAGE_FACTOR);
+				page_ins = be32_to_cpu(get_lppaca()->page_ins);
+				page_ins += 1 << PAGE_FACTOR;
+				get_lppaca()->page_ins = cpu_to_be32(page_ins);
 				preempt_enable();
 			}
 #endif /* CONFIG_PPC_SMLPAR */
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
index 49822d9..6936547 100644
--- a/arch/powerpc/mm/gup.c
+++ b/arch/powerpc/mm/gup.c
@@ -117,8 +117,8 @@ static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end,
 	return 1;
 }
 
-int get_user_pages_fast(unsigned long start, int nr_pages, int write,
-			struct page **pages)
+int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
+			  struct page **pages)
 {
 	struct mm_struct *mm = current->mm;
 	unsigned long addr, len, end;
@@ -135,7 +135,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 
 	if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
 					start, len)))
-		goto slow_irqon;
+		return 0;
 
 	pr_devel("  aligned: %lx .. %lx\n", start, end);
 
@@ -166,30 +166,35 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 			 (void *)pgd_val(pgd));
 		next = pgd_addr_end(addr, end);
 		if (pgd_none(pgd))
-			goto slow;
+			break;
 		if (pgd_huge(pgd)) {
 			if (!gup_hugepte((pte_t *)pgdp, PGDIR_SIZE, addr, next,
 					 write, pages, &nr))
-				goto slow;
+				break;
 		} else if (is_hugepd(pgdp)) {
 			if (!gup_hugepd((hugepd_t *)pgdp, PGDIR_SHIFT,
 					addr, next, write, pages, &nr))
-				goto slow;
+				break;
 		} else if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
-			goto slow;
+			break;
 	} while (pgdp++, addr = next, addr != end);
 
 	local_irq_enable();
 
-	VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT);
 	return nr;
+}
 
-	{
-		int ret;
+int get_user_pages_fast(unsigned long start, int nr_pages, int write,
+			struct page **pages)
+{
+	struct mm_struct *mm = current->mm;
+	int nr, ret;
+
+	start &= PAGE_MASK;
+	nr = __get_user_pages_fast(start, nr_pages, write, pages);
+	ret = nr;
 
-slow:
-		local_irq_enable();
-slow_irqon:
+	if (nr < nr_pages) {
 		pr_devel("  slow path ! nr = %d\n", nr);
 
 		/* Try to get the remaining pages with get_user_pages */
@@ -198,7 +203,7 @@ slow_irqon:
 
 		down_read(&mm->mmap_sem);
 		ret = get_user_pages(current, mm, start,
-			(end - start) >> PAGE_SHIFT, write, 0, pages, NULL);
+				     nr_pages - nr, write, 0, pages, NULL);
 		up_read(&mm->mmap_sem);
 
 		/* Have to be a bit careful with return values */
@@ -208,9 +213,9 @@ slow_irqon:
 			else
 				ret += nr;
 		}
-
-		return ret;
 	}
+
+	return ret;
 }
 
 #endif /* __HAVE_ARCH_PTE_SPECIAL */
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 6ecc38b..bde8b55 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -907,7 +907,7 @@ static int subpage_protection(struct mm_struct *mm, unsigned long ea)
 
 	if (ea >= spt->maxaddr)
 		return 0;
-	if (ea < 0x100000000) {
+	if (ea < 0x100000000UL) {
 		/* addresses below 4GB use spt->low_prot */
 		sbpm = spt->low_prot;
 	} else {
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 834ca8e..d67db4b 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -86,6 +86,11 @@ int pgd_huge(pgd_t pgd)
 	 */
 	return ((pgd_val(pgd) & 0x3) != 0x0);
 }
+
+int pmd_huge_support(void)
+{
+	return 1;
+}
 #else
 int pmd_huge(pmd_t pmd)
 {
@@ -101,6 +106,11 @@ int pgd_huge(pgd_t pgd)
 {
 	return 0;
 }
+
+int pmd_huge_support(void)
+{
+	return 0;
+}
 #endif
 
 pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 01e2db9..d47d3dab 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -52,7 +52,7 @@
 #if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL)
 /* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */
 #if (CONFIG_LOWMEM_SIZE > (0xF0000000 - PAGE_OFFSET))
-#error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL"
+#error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_KERNEL_START"
 #endif
 #endif
 #define MAX_LOW_MEM	CONFIG_LOWMEM_SIZE
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index d0cd9e4..8ed035d 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -300,5 +300,9 @@ void vmemmap_free(unsigned long start, unsigned long end)
 {
 }
 
+void register_page_bootmem_memmap(unsigned long section_nr,
+				  struct page *start_page, unsigned long size)
+{
+}
 #endif /* CONFIG_SPARSEMEM_VMEMMAP */
 
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 7f4bea1..3fa93dc 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -297,12 +297,21 @@ void __init paging_init(void)
 }
 #endif /* ! CONFIG_NEED_MULTIPLE_NODES */
 
+static void __init register_page_bootmem_info(void)
+{
+	int i;
+
+	for_each_online_node(i)
+		register_page_bootmem_info_node(NODE_DATA(i));
+}
+
 void __init mem_init(void)
 {
 #ifdef CONFIG_SWIOTLB
 	swiotlb_init(0);
 #endif
 
+	register_page_bootmem_info();
 	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
 	set_max_mapnr(max_pfn);
 	free_all_bootmem();
@@ -514,7 +523,7 @@ static int add_system_ram_resources(void)
 			res->name = "System RAM";
 			res->start = base;
 			res->end = base + size - 1;
-			res->flags = IORESOURCE_MEM;
+			res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
 			WARN_ON(request_resource(&iomem_resource, res) < 0);
 		}
 	}
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 5850798..c916127 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -58,7 +58,7 @@ static int form1_affinity;
 
 #define MAX_DISTANCE_REF_POINTS 4
 static int distance_ref_points_depth;
-static const unsigned int *distance_ref_points;
+static const __be32 *distance_ref_points;
 static int distance_lookup_table[MAX_NUMNODES][MAX_DISTANCE_REF_POINTS];
 
 /*
@@ -179,7 +179,7 @@ static void unmap_cpu_from_node(unsigned long cpu)
 #endif /* CONFIG_HOTPLUG_CPU || CONFIG_PPC_SPLPAR */
 
 /* must hold reference to node during call */
-static const int *of_get_associativity(struct device_node *dev)
+static const __be32 *of_get_associativity(struct device_node *dev)
 {
 	return of_get_property(dev, "ibm,associativity", NULL);
 }
@@ -189,9 +189,9 @@ static const int *of_get_associativity(struct device_node *dev)
  * it exists (the property exists only in kexec/kdump kernels,
  * added by kexec-tools)
  */
-static const u32 *of_get_usable_memory(struct device_node *memory)
+static const __be32 *of_get_usable_memory(struct device_node *memory)
 {
-	const u32 *prop;
+	const __be32 *prop;
 	u32 len;
 	prop = of_get_property(memory, "linux,drconf-usable-memory", &len);
 	if (!prop || len < sizeof(unsigned int))
@@ -219,7 +219,7 @@ int __node_distance(int a, int b)
 }
 
 static void initialize_distance_lookup_table(int nid,
-		const unsigned int *associativity)
+		const __be32 *associativity)
 {
 	int i;
 
@@ -227,29 +227,32 @@ static void initialize_distance_lookup_table(int nid,
 		return;
 
 	for (i = 0; i < distance_ref_points_depth; i++) {
-		distance_lookup_table[nid][i] =
-			associativity[distance_ref_points[i]];
+		const __be32 *entry;
+
+		entry = &associativity[be32_to_cpu(distance_ref_points[i])];
+		distance_lookup_table[nid][i] = of_read_number(entry, 1);
 	}
 }
 
 /* Returns nid in the range [0..MAX_NUMNODES-1], or -1 if no useful numa
  * info is found.
  */
-static int associativity_to_nid(const unsigned int *associativity)
+static int associativity_to_nid(const __be32 *associativity)
 {
 	int nid = -1;
 
 	if (min_common_depth == -1)
 		goto out;
 
-	if (associativity[0] >= min_common_depth)
-		nid = associativity[min_common_depth];
+	if (of_read_number(associativity, 1) >= min_common_depth)
+		nid = of_read_number(&associativity[min_common_depth], 1);
 
 	/* POWER4 LPAR uses 0xffff as invalid node */
 	if (nid == 0xffff || nid >= MAX_NUMNODES)
 		nid = -1;
 
-	if (nid > 0 && associativity[0] >= distance_ref_points_depth)
+	if (nid > 0 &&
+	    of_read_number(associativity, 1) >= distance_ref_points_depth)
 		initialize_distance_lookup_table(nid, associativity);
 
 out:
@@ -262,7 +265,7 @@ out:
 static int of_node_to_nid_single(struct device_node *device)
 {
 	int nid = -1;
-	const unsigned int *tmp;
+	const __be32 *tmp;
 
 	tmp = of_get_associativity(device);
 	if (tmp)
@@ -334,7 +337,7 @@ static int __init find_min_common_depth(void)
 	}
 
 	if (form1_affinity) {
-		depth = distance_ref_points[0];
+		depth = of_read_number(distance_ref_points, 1);
 	} else {
 		if (distance_ref_points_depth < 2) {
 			printk(KERN_WARNING "NUMA: "
@@ -342,7 +345,7 @@ static int __init find_min_common_depth(void)
 			goto err;
 		}
 
-		depth = distance_ref_points[1];
+		depth = of_read_number(&distance_ref_points[1], 1);
 	}
 
 	/*
@@ -376,12 +379,12 @@ static void __init get_n_mem_cells(int *n_addr_cells, int *n_size_cells)
 	of_node_put(memory);
 }
 
-static unsigned long read_n_cells(int n, const unsigned int **buf)
+static unsigned long read_n_cells(int n, const __be32 **buf)
 {
 	unsigned long result = 0;
 
 	while (n--) {
-		result = (result << 32) | **buf;
+		result = (result << 32) | of_read_number(*buf, 1);
 		(*buf)++;
 	}
 	return result;
@@ -391,17 +394,17 @@ static unsigned long read_n_cells(int n, const unsigned int **buf)
  * Read the next memblock list entry from the ibm,dynamic-memory property
  * and return the information in the provided of_drconf_cell structure.
  */
-static void read_drconf_cell(struct of_drconf_cell *drmem, const u32 **cellp)
+static void read_drconf_cell(struct of_drconf_cell *drmem, const __be32 **cellp)
 {
-	const u32 *cp;
+	const __be32 *cp;
 
 	drmem->base_addr = read_n_cells(n_mem_addr_cells, cellp);
 
 	cp = *cellp;
-	drmem->drc_index = cp[0];
-	drmem->reserved = cp[1];
-	drmem->aa_index = cp[2];
-	drmem->flags = cp[3];
+	drmem->drc_index = of_read_number(cp, 1);
+	drmem->reserved = of_read_number(&cp[1], 1);
+	drmem->aa_index = of_read_number(&cp[2], 1);
+	drmem->flags = of_read_number(&cp[3], 1);
 
 	*cellp = cp + 4;
 }
@@ -413,16 +416,16 @@ static void read_drconf_cell(struct of_drconf_cell *drmem, const u32 **cellp)
  * list entries followed by N memblock list entries.  Each memblock list entry
  * contains information as laid out in the of_drconf_cell struct above.
  */
-static int of_get_drconf_memory(struct device_node *memory, const u32 **dm)
+static int of_get_drconf_memory(struct device_node *memory, const __be32 **dm)
 {
-	const u32 *prop;
+	const __be32 *prop;
 	u32 len, entries;
 
 	prop = of_get_property(memory, "ibm,dynamic-memory", &len);
 	if (!prop || len < sizeof(unsigned int))
 		return 0;
 
-	entries = *prop++;
+	entries = of_read_number(prop++, 1);
 
 	/* Now that we know the number of entries, revalidate the size
 	 * of the property read in to ensure we have everything
@@ -440,7 +443,7 @@ static int of_get_drconf_memory(struct device_node *memory, const u32 **dm)
  */
 static u64 of_get_lmb_size(struct device_node *memory)
 {
-	const u32 *prop;
+	const __be32 *prop;
 	u32 len;
 
 	prop = of_get_property(memory, "ibm,lmb-size", &len);
@@ -453,7 +456,7 @@ static u64 of_get_lmb_size(struct device_node *memory)
 struct assoc_arrays {
 	u32	n_arrays;
 	u32	array_sz;
-	const u32 *arrays;
+	const __be32 *arrays;
 };
 
 /*
@@ -469,15 +472,15 @@ struct assoc_arrays {
 static int of_get_assoc_arrays(struct device_node *memory,
 			       struct assoc_arrays *aa)
 {
-	const u32 *prop;
+	const __be32 *prop;
 	u32 len;
 
 	prop = of_get_property(memory, "ibm,associativity-lookup-arrays", &len);
 	if (!prop || len < 2 * sizeof(unsigned int))
 		return -1;
 
-	aa->n_arrays = *prop++;
-	aa->array_sz = *prop++;
+	aa->n_arrays = of_read_number(prop++, 1);
+	aa->array_sz = of_read_number(prop++, 1);
 
 	/* Now that we know the number of arrays and size of each array,
 	 * revalidate the size of the property read in.
@@ -504,7 +507,7 @@ static int of_drconf_to_nid_single(struct of_drconf_cell *drmem,
 	    !(drmem->flags & DRCONF_MEM_AI_INVALID) &&
 	    drmem->aa_index < aa->n_arrays) {
 		index = drmem->aa_index * aa->array_sz + min_common_depth - 1;
-		nid = aa->arrays[index];
+		nid = of_read_number(&aa->arrays[index], 1);
 
 		if (nid == 0xffff || nid >= MAX_NUMNODES)
 			nid = default_nid;
@@ -595,7 +598,7 @@ static unsigned long __init numa_enforce_memory_limit(unsigned long start,
  * Reads the counter for a given entry in
  * linux,drconf-usable-memory property
  */
-static inline int __init read_usm_ranges(const u32 **usm)
+static inline int __init read_usm_ranges(const __be32 **usm)
 {
 	/*
 	 * For each lmb in ibm,dynamic-memory a corresponding
@@ -612,7 +615,7 @@ static inline int __init read_usm_ranges(const u32 **usm)
  */
 static void __init parse_drconf_memory(struct device_node *memory)
 {
-	const u32 *uninitialized_var(dm), *usm;
+	const __be32 *uninitialized_var(dm), *usm;
 	unsigned int n, rc, ranges, is_kexec_kdump = 0;
 	unsigned long lmb_size, base, size, sz;
 	int nid;
@@ -721,7 +724,7 @@ static int __init parse_numa_properties(void)
 		unsigned long size;
 		int nid;
 		int ranges;
-		const unsigned int *memcell_buf;
+		const __be32 *memcell_buf;
 		unsigned int len;
 
 		memcell_buf = of_get_property(memory,
@@ -1106,7 +1109,7 @@ early_param("numa", early_numa);
 static int hot_add_drconf_scn_to_nid(struct device_node *memory,
 				     unsigned long scn_addr)
 {
-	const u32 *dm;
+	const __be32 *dm;
 	unsigned int drconf_cell_cnt, rc;
 	unsigned long lmb_size;
 	struct assoc_arrays aa;
@@ -1159,7 +1162,7 @@ int hot_add_node_scn_to_nid(unsigned long scn_addr)
 	for_each_node_by_type(memory, "memory") {
 		unsigned long start, size;
 		int ranges;
-		const unsigned int *memcell_buf;
+		const __be32 *memcell_buf;
 		unsigned int len;
 
 		memcell_buf = of_get_property(memory, "reg", &len);
@@ -1232,7 +1235,7 @@ static u64 hot_add_drconf_memory_max(void)
         struct device_node *memory = NULL;
         unsigned int drconf_cell_cnt = 0;
         u64 lmb_size = 0;
-        const u32 *dm = 0;
+	const __be32 *dm = 0;
 
         memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
         if (memory) {
@@ -1337,40 +1340,41 @@ static int update_cpu_associativity_changes_mask(void)
  * Convert the associativity domain numbers returned from the hypervisor
  * to the sequence they would appear in the ibm,associativity property.
  */
-static int vphn_unpack_associativity(const long *packed, unsigned int *unpacked)
+static int vphn_unpack_associativity(const long *packed, __be32 *unpacked)
 {
 	int i, nr_assoc_doms = 0;
-	const u16 *field = (const u16*) packed;
+	const __be16 *field = (const __be16 *) packed;
 
 #define VPHN_FIELD_UNUSED	(0xffff)
 #define VPHN_FIELD_MSB		(0x8000)
 #define VPHN_FIELD_MASK		(~VPHN_FIELD_MSB)
 
 	for (i = 1; i < VPHN_ASSOC_BUFSIZE; i++) {
-		if (*field == VPHN_FIELD_UNUSED) {
+		if (be16_to_cpup(field) == VPHN_FIELD_UNUSED) {
 			/* All significant fields processed, and remaining
 			 * fields contain the reserved value of all 1's.
 			 * Just store them.
 			 */
-			unpacked[i] = *((u32*)field);
+			unpacked[i] = *((__be32 *)field);
 			field += 2;
-		} else if (*field & VPHN_FIELD_MSB) {
+		} else if (be16_to_cpup(field) & VPHN_FIELD_MSB) {
 			/* Data is in the lower 15 bits of this field */
-			unpacked[i] = *field & VPHN_FIELD_MASK;
+			unpacked[i] = cpu_to_be32(
+				be16_to_cpup(field) & VPHN_FIELD_MASK);
 			field++;
 			nr_assoc_doms++;
 		} else {
 			/* Data is in the lower 15 bits of this field
 			 * concatenated with the next 16 bit field
 			 */
-			unpacked[i] = *((u32*)field);
+			unpacked[i] = *((__be32 *)field);
 			field += 2;
 			nr_assoc_doms++;
 		}
 	}
 
 	/* The first cell contains the length of the property */
-	unpacked[0] = nr_assoc_doms;
+	unpacked[0] = cpu_to_be32(nr_assoc_doms);
 
 	return nr_assoc_doms;
 }
@@ -1379,7 +1383,7 @@ static int vphn_unpack_associativity(const long *packed, unsigned int *unpacked)
  * Retrieve the new associativity information for a virtual processor's
  * home node.
  */
-static long hcall_vphn(unsigned long cpu, unsigned int *associativity)
+static long hcall_vphn(unsigned long cpu, __be32 *associativity)
 {
 	long rc;
 	long retbuf[PLPAR_HCALL9_BUFSIZE] = {0};
@@ -1393,7 +1397,7 @@ static long hcall_vphn(unsigned long cpu, unsigned int *associativity)
 }
 
 static long vphn_get_associativity(unsigned long cpu,
-					unsigned int *associativity)
+					__be32 *associativity)
 {
 	long rc;
 
@@ -1450,7 +1454,7 @@ int arch_update_cpu_topology(void)
 {
 	unsigned int cpu, sibling, changed = 0;
 	struct topology_update_data *updates, *ud;
-	unsigned int associativity[VPHN_ASSOC_BUFSIZE] = {0};
+	__be32 associativity[VPHN_ASSOC_BUFSIZE] = {0};
 	cpumask_t updated_cpus;
 	struct device *dev;
 	int weight, new_nid, i = 0;
@@ -1609,7 +1613,7 @@ int start_topology_update(void)
 #endif
 		}
 	} else if (firmware_has_feature(FW_FEATURE_VPHN) &&
-		   get_lppaca()->shared_proc) {
+		   lppaca_shared_proc(get_lppaca())) {
 		if (!vphn_enabled) {
 			prrn_enabled = 0;
 			vphn_enabled = 1;
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index a538c80..9d1d33c 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -66,8 +66,10 @@ static inline void slb_shadow_update(unsigned long ea, int ssize,
 	 * we only update the current CPU's SLB shadow buffer.
 	 */
 	get_slb_shadow()->save_area[entry].esid = 0;
-	get_slb_shadow()->save_area[entry].vsid = mk_vsid_data(ea, ssize, flags);
-	get_slb_shadow()->save_area[entry].esid = mk_esid_data(ea, ssize, entry);
+	get_slb_shadow()->save_area[entry].vsid =
+				cpu_to_be64(mk_vsid_data(ea, ssize, flags));
+	get_slb_shadow()->save_area[entry].esid =
+				cpu_to_be64(mk_esid_data(ea, ssize, entry));
 }
 
 static inline void slb_shadow_clear(unsigned long entry)
@@ -112,7 +114,8 @@ static void __slb_flush_and_rebolt(void)
 	} else {
 		/* Update stack entry; others don't change */
 		slb_shadow_update(get_paca()->kstack, mmu_kernel_ssize, lflags, 2);
-		ksp_vsid_data = get_slb_shadow()->save_area[2].vsid;
+		ksp_vsid_data =
+			be64_to_cpu(get_slb_shadow()->save_area[2].vsid);
 	}
 
 	/* We need to do this all in asm, so we're sure we don't touch
diff --git a/arch/powerpc/mm/subpage-prot.c b/arch/powerpc/mm/subpage-prot.c
index aa74acb..a770df2d 100644
--- a/arch/powerpc/mm/subpage-prot.c
+++ b/arch/powerpc/mm/subpage-prot.c
@@ -105,7 +105,7 @@ static void subpage_prot_clear(unsigned long addr, unsigned long len)
 		limit = spt->maxaddr;
 	for (; addr < limit; addr = next) {
 		next = pmd_addr_end(addr, limit);
-		if (addr < 0x100000000) {
+		if (addr < 0x100000000UL) {
 			spm = spt->low_prot;
 		} else {
 			spm = spt->protptrs[addr >> SBP_L3_SHIFT];
@@ -219,7 +219,7 @@ long sys_subpage_prot(unsigned long addr, unsigned long len, u32 __user *map)
 	for (limit = addr + len; addr < limit; addr = next) {
 		next = pmd_addr_end(addr, limit);
 		err = -ENOMEM;
-		if (addr < 0x100000000) {
+		if (addr < 0x100000000UL) {
 			spm = spt->low_prot;
 		} else {
 			spm = spt->protptrs[addr >> SBP_L3_SHIFT];
diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c
index bf56e33..2345bdb 100644
--- a/arch/powerpc/net/bpf_jit_comp.c
+++ b/arch/powerpc/net/bpf_jit_comp.c
@@ -691,4 +691,5 @@ void bpf_jit_free(struct sk_filter *fp)
 {
 	if (fp->bpf_func != sk_run_filter)
 		module_free(NULL, fp->bpf_func);
+	kfree(fp);
 }
diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c
index 4f51025..c77348c 100644
--- a/arch/powerpc/oprofile/common.c
+++ b/arch/powerpc/oprofile/common.c
@@ -119,7 +119,7 @@ static void op_powerpc_stop(void)
                 model->global_stop();
 }
 
-static int op_powerpc_create_files(struct super_block *sb, struct dentry *root)
+static int op_powerpc_create_files(struct dentry *root)
 {
 	int i;
 
@@ -128,9 +128,9 @@ static int op_powerpc_create_files(struct super_block *sb, struct dentry *root)
 	 * There is one mmcr0, mmcr1 and mmcra for setting the events for
 	 * all of the counters.
 	 */
-	oprofilefs_create_ulong(sb, root, "mmcr0", &sys.mmcr0);
-	oprofilefs_create_ulong(sb, root, "mmcr1", &sys.mmcr1);
-	oprofilefs_create_ulong(sb, root, "mmcra", &sys.mmcra);
+	oprofilefs_create_ulong(root, "mmcr0", &sys.mmcr0);
+	oprofilefs_create_ulong(root, "mmcr1", &sys.mmcr1);
+	oprofilefs_create_ulong(root, "mmcra", &sys.mmcra);
 #ifdef CONFIG_OPROFILE_CELL
 	/* create a file the user tool can check to see what level of profiling
 	 * support exits with this kernel. Initialize bit mask to indicate
@@ -142,7 +142,7 @@ static int op_powerpc_create_files(struct super_block *sb, struct dentry *root)
 	 * If the file does not exist, then the kernel only supports SPU
 	 * cycle profiling, PPU event and cycle profiling.
 	 */
-	oprofilefs_create_ulong(sb, root, "cell_support", &sys.cell_support);
+	oprofilefs_create_ulong(root, "cell_support", &sys.cell_support);
 	sys.cell_support = 0x1; /* Note, the user OProfile tool must check
 				 * that this bit is set before attempting to
 				 * user SPU event profiling.  Older kernels
@@ -160,11 +160,11 @@ static int op_powerpc_create_files(struct super_block *sb, struct dentry *root)
 		char buf[4];
 
 		snprintf(buf, sizeof buf, "%d", i);
-		dir = oprofilefs_mkdir(sb, root, buf);
+		dir = oprofilefs_mkdir(root, buf);
 
-		oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
-		oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
-		oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
+		oprofilefs_create_ulong(dir, "enabled", &ctr[i].enabled);
+		oprofilefs_create_ulong(dir, "event", &ctr[i].event);
+		oprofilefs_create_ulong(dir, "count", &ctr[i].count);
 
 		/*
 		 * Classic PowerPC doesn't support per-counter
@@ -173,14 +173,14 @@ static int op_powerpc_create_files(struct super_block *sb, struct dentry *root)
 		 * Book-E style performance monitors, we do
 		 * support them.
 		 */
-		oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
-		oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
+		oprofilefs_create_ulong(dir, "kernel", &ctr[i].kernel);
+		oprofilefs_create_ulong(dir, "user", &ctr[i].user);
 
-		oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
+		oprofilefs_create_ulong(dir, "unit_mask", &ctr[i].unit_mask);
 	}
 
-	oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel);
-	oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user);
+	oprofilefs_create_ulong(root, "enable_kernel", &sys.enable_kernel);
+	oprofilefs_create_ulong(root, "enable_user", &sys.enable_user);
 
 	/* Default to tracing both kernel and user */
 	sys.enable_kernel = 1;
diff --git a/arch/powerpc/oprofile/op_model_fsl_emb.c b/arch/powerpc/oprofile/op_model_fsl_emb.c
index ccc1daa..2a82d3e 100644
--- a/arch/powerpc/oprofile/op_model_fsl_emb.c
+++ b/arch/powerpc/oprofile/op_model_fsl_emb.c
@@ -46,6 +46,12 @@ static inline u32 get_pmlca(int ctr)
 		case 3:
 			pmlca = mfpmr(PMRN_PMLCA3);
 			break;
+		case 4:
+			pmlca = mfpmr(PMRN_PMLCA4);
+			break;
+		case 5:
+			pmlca = mfpmr(PMRN_PMLCA5);
+			break;
 		default:
 			panic("Bad ctr number\n");
 	}
@@ -68,6 +74,12 @@ static inline void set_pmlca(int ctr, u32 pmlca)
 		case 3:
 			mtpmr(PMRN_PMLCA3, pmlca);
 			break;
+		case 4:
+			mtpmr(PMRN_PMLCA4, pmlca);
+			break;
+		case 5:
+			mtpmr(PMRN_PMLCA5, pmlca);
+			break;
 		default:
 			panic("Bad ctr number\n");
 	}
@@ -84,6 +96,10 @@ static inline unsigned int ctr_read(unsigned int i)
 			return mfpmr(PMRN_PMC2);
 		case 3:
 			return mfpmr(PMRN_PMC3);
+		case 4:
+			return mfpmr(PMRN_PMC4);
+		case 5:
+			return mfpmr(PMRN_PMC5);
 		default:
 			return 0;
 	}
@@ -104,6 +120,12 @@ static inline void ctr_write(unsigned int i, unsigned int val)
 		case 3:
 			mtpmr(PMRN_PMC3, val);
 			break;
+		case 4:
+			mtpmr(PMRN_PMC4, val);
+			break;
+		case 5:
+			mtpmr(PMRN_PMC5, val);
+			break;
 		default:
 			break;
 	}
@@ -133,6 +155,14 @@ static void init_pmc_stop(int ctr)
 			mtpmr(PMRN_PMLCA3, pmlca);
 			mtpmr(PMRN_PMLCB3, pmlcb);
 			break;
+		case 4:
+			mtpmr(PMRN_PMLCA4, pmlca);
+			mtpmr(PMRN_PMLCB4, pmlcb);
+			break;
+		case 5:
+			mtpmr(PMRN_PMLCA5, pmlca);
+			mtpmr(PMRN_PMLCB5, pmlcb);
+			break;
 		default:
 			panic("Bad ctr number!\n");
 	}
diff --git a/arch/powerpc/perf/Makefile b/arch/powerpc/perf/Makefile
index 510fae1..60d71ee 100644
--- a/arch/powerpc/perf/Makefile
+++ b/arch/powerpc/perf/Makefile
@@ -9,7 +9,7 @@ obj64-$(CONFIG_PPC_PERF_CTRS)	+= power4-pmu.o ppc970-pmu.o power5-pmu.o \
 obj32-$(CONFIG_PPC_PERF_CTRS)	+= mpc7450-pmu.o
 
 obj-$(CONFIG_FSL_EMB_PERF_EVENT) += core-fsl-emb.o
-obj-$(CONFIG_FSL_EMB_PERF_EVENT_E500) += e500-pmu.o
+obj-$(CONFIG_FSL_EMB_PERF_EVENT_E500) += e500-pmu.o e6500-pmu.o
 
 obj-$(CONFIG_PPC64)		+= $(obj64-y)
 obj-$(CONFIG_PPC32)		+= $(obj32-y)
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index eeae308..29b89e8 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -24,7 +24,7 @@
 #define BHRB_MAX_ENTRIES	32
 #define BHRB_TARGET		0x0000000000000002
 #define BHRB_PREDICTION		0x0000000000000001
-#define BHRB_EA			0xFFFFFFFFFFFFFFFC
+#define BHRB_EA			0xFFFFFFFFFFFFFFFCUL
 
 struct cpu_hw_events {
 	int n_events;
diff --git a/arch/powerpc/perf/core-fsl-emb.c b/arch/powerpc/perf/core-fsl-emb.c
index 106c533..d35ae52 100644
--- a/arch/powerpc/perf/core-fsl-emb.c
+++ b/arch/powerpc/perf/core-fsl-emb.c
@@ -70,6 +70,12 @@ static unsigned long read_pmc(int idx)
 	case 3:
 		val = mfpmr(PMRN_PMC3);
 		break;
+	case 4:
+		val = mfpmr(PMRN_PMC4);
+		break;
+	case 5:
+		val = mfpmr(PMRN_PMC5);
+		break;
 	default:
 		printk(KERN_ERR "oops trying to read PMC%d\n", idx);
 		val = 0;
@@ -95,6 +101,12 @@ static void write_pmc(int idx, unsigned long val)
 	case 3:
 		mtpmr(PMRN_PMC3, val);
 		break;
+	case 4:
+		mtpmr(PMRN_PMC4, val);
+		break;
+	case 5:
+		mtpmr(PMRN_PMC5, val);
+		break;
 	default:
 		printk(KERN_ERR "oops trying to write PMC%d\n", idx);
 	}
@@ -120,6 +132,12 @@ static void write_pmlca(int idx, unsigned long val)
 	case 3:
 		mtpmr(PMRN_PMLCA3, val);
 		break;
+	case 4:
+		mtpmr(PMRN_PMLCA4, val);
+		break;
+	case 5:
+		mtpmr(PMRN_PMLCA5, val);
+		break;
 	default:
 		printk(KERN_ERR "oops trying to write PMLCA%d\n", idx);
 	}
@@ -145,6 +163,12 @@ static void write_pmlcb(int idx, unsigned long val)
 	case 3:
 		mtpmr(PMRN_PMLCB3, val);
 		break;
+	case 4:
+		mtpmr(PMRN_PMLCB4, val);
+		break;
+	case 5:
+		mtpmr(PMRN_PMLCB5, val);
+		break;
 	default:
 		printk(KERN_ERR "oops trying to write PMLCB%d\n", idx);
 	}
@@ -462,6 +486,12 @@ static int fsl_emb_pmu_event_init(struct perf_event *event)
 	int num_restricted;
 	int i;
 
+	if (ppmu->n_counter > MAX_HWEVENTS) {
+		WARN(1, "No. of perf counters (%d) is higher than max array size(%d)\n",
+			ppmu->n_counter, MAX_HWEVENTS);
+		ppmu->n_counter = MAX_HWEVENTS;
+	}
+
 	switch (event->attr.type) {
 	case PERF_TYPE_HARDWARE:
 		ev = event->attr.config;
diff --git a/arch/powerpc/perf/e6500-pmu.c b/arch/powerpc/perf/e6500-pmu.c
new file mode 100644
index 0000000..3d877aa
--- /dev/null
+++ b/arch/powerpc/perf/e6500-pmu.c
@@ -0,0 +1,121 @@
+/*
+ * Performance counter support for e6500 family processors.
+ *
+ * Author: Priyanka Jain, Priyanka.Jain@freescale.com
+ * Based on e500-pmu.c
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/string.h>
+#include <linux/perf_event.h>
+#include <asm/reg.h>
+#include <asm/cputable.h>
+
+/*
+ * Map of generic hardware event types to hardware events
+ * Zero if unsupported
+ */
+static int e6500_generic_events[] = {
+	[PERF_COUNT_HW_CPU_CYCLES] = 1,
+	[PERF_COUNT_HW_INSTRUCTIONS] = 2,
+	[PERF_COUNT_HW_CACHE_MISSES] = 221,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 12,
+	[PERF_COUNT_HW_BRANCH_MISSES] = 15,
+};
+
+#define C(x)	PERF_COUNT_HW_CACHE_##x
+
+/*
+ * Table of generalized cache-related events.
+ * 0 means not supported, -1 means nonsensical, other values
+ * are event codes.
+ */
+static int e6500_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+	[C(L1D)] = {
+				/*RESULT_ACCESS		RESULT_MISS */
+		[C(OP_READ)] = {	27,		222	},
+		[C(OP_WRITE)] = {	28,		223	},
+		[C(OP_PREFETCH)] = {	29,		0	},
+	},
+	[C(L1I)] = {
+				/*RESULT_ACCESS		RESULT_MISS */
+		[C(OP_READ)] = {	2,		254	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	37,		0	},
+	},
+	/*
+	 * Assuming LL means L2, it's not a good match for this model.
+	 * It does not have separate read/write events (but it does have
+	 * separate instruction/data events).
+	 */
+	[C(LL)] = {
+				/*RESULT_ACCESS		RESULT_MISS */
+		[C(OP_READ)] = {	0,		0	},
+		[C(OP_WRITE)] = {	0,		0	},
+		[C(OP_PREFETCH)] = {	0,		0	},
+	},
+	/*
+	 * There are data/instruction MMU misses, but that's a miss on
+	 * the chip's internal level-one TLB which is probably not
+	 * what the user wants.  Instead, unified level-two TLB misses
+	 * are reported here.
+	 */
+	[C(DTLB)] = {
+				/*RESULT_ACCESS		RESULT_MISS */
+		[C(OP_READ)] = {	26,		66	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+	[C(BPU)] = {
+				/*RESULT_ACCESS		RESULT_MISS */
+		[C(OP_READ)] = {	12,		15	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+	[C(NODE)] = {
+				/* RESULT_ACCESS	RESULT_MISS */
+		[C(OP_READ)] = {	-1,		-1	},
+		[C(OP_WRITE)] = {	-1,		-1	},
+		[C(OP_PREFETCH)] = {	-1,		-1	},
+	},
+};
+
+static int num_events = 512;
+
+/* Upper half of event id is PMLCb, for threshold events */
+static u64 e6500_xlate_event(u64 event_id)
+{
+	u32 event_low = (u32)event_id;
+	if (event_low >= num_events ||
+		(event_id & (FSL_EMB_EVENT_THRESHMUL | FSL_EMB_EVENT_THRESH)))
+		return 0;
+
+	return FSL_EMB_EVENT_VALID;
+}
+
+static struct fsl_emb_pmu e6500_pmu = {
+	.name			= "e6500 family",
+	.n_counter		= 6,
+	.n_restricted		= 0,
+	.xlate_event		= e6500_xlate_event,
+	.n_generic		= ARRAY_SIZE(e6500_generic_events),
+	.generic_events		= e6500_generic_events,
+	.cache_events		= &e6500_cache_events,
+};
+
+static int init_e6500_pmu(void)
+{
+	if (!cur_cpu_spec->oprofile_cpu_type ||
+		strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/e6500"))
+		return -ENODEV;
+
+	return register_fsl_emb_pmu(&e6500_pmu);
+}
+
+early_initcall(init_e6500_pmu);
diff --git a/arch/powerpc/perf/power7-events-list.h b/arch/powerpc/perf/power7-events-list.h
new file mode 100644
index 0000000..687790a
--- /dev/null
+++ b/arch/powerpc/perf/power7-events-list.h
@@ -0,0 +1,548 @@
+/*
+ * Performance counter support for POWER7 processors.
+ *
+ * Copyright 2013 Runzhen Wang, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+EVENT(PM_IC_DEMAND_L2_BR_ALL,                 0x04898)
+EVENT(PM_GCT_UTIL_7_TO_10_SLOTS,              0x020a0)
+EVENT(PM_PMC2_SAVED,                          0x10022)
+EVENT(PM_CMPLU_STALL_DFU,                     0x2003c)
+EVENT(PM_VSU0_16FLOP,                         0x0a0a4)
+EVENT(PM_MRK_LSU_DERAT_MISS,                  0x3d05a)
+EVENT(PM_MRK_ST_CMPL,                         0x10034)
+EVENT(PM_NEST_PAIR3_ADD,                      0x40881)
+EVENT(PM_L2_ST_DISP,                          0x46180)
+EVENT(PM_L2_CASTOUT_MOD,                      0x16180)
+EVENT(PM_ISEG,                                0x020a4)
+EVENT(PM_MRK_INST_TIMEO,                      0x40034)
+EVENT(PM_L2_RCST_DISP_FAIL_ADDR,              0x36282)
+EVENT(PM_LSU1_DC_PREF_STREAM_CONFIRM,         0x0d0b6)
+EVENT(PM_IERAT_WR_64K,                        0x040be)
+EVENT(PM_MRK_DTLB_MISS_16M,                   0x4d05e)
+EVENT(PM_IERAT_MISS,                          0x100f6)
+EVENT(PM_MRK_PTEG_FROM_LMEM,                  0x4d052)
+EVENT(PM_FLOP,                                0x100f4)
+EVENT(PM_THRD_PRIO_4_5_CYC,                   0x040b4)
+EVENT(PM_BR_PRED_TA,                          0x040aa)
+EVENT(PM_CMPLU_STALL_FXU,                     0x20014)
+EVENT(PM_EXT_INT,                             0x200f8)
+EVENT(PM_VSU_FSQRT_FDIV,                      0x0a888)
+EVENT(PM_MRK_LD_MISS_EXPOSED_CYC,             0x1003e)
+EVENT(PM_LSU1_LDF,                            0x0c086)
+EVENT(PM_IC_WRITE_ALL,                        0x0488c)
+EVENT(PM_LSU0_SRQ_STFWD,                      0x0c0a0)
+EVENT(PM_PTEG_FROM_RL2L3_MOD,                 0x1c052)
+EVENT(PM_MRK_DATA_FROM_L31_SHR,               0x1d04e)
+EVENT(PM_DATA_FROM_L21_MOD,                   0x3c046)
+EVENT(PM_VSU1_SCAL_DOUBLE_ISSUED,             0x0b08a)
+EVENT(PM_VSU0_8FLOP,                          0x0a0a0)
+EVENT(PM_POWER_EVENT1,                        0x1006e)
+EVENT(PM_DISP_CLB_HELD_BAL,                   0x02092)
+EVENT(PM_VSU1_2FLOP,                          0x0a09a)
+EVENT(PM_LWSYNC_HELD,                         0x0209a)
+EVENT(PM_PTEG_FROM_DL2L3_SHR,                 0x3c054)
+EVENT(PM_INST_FROM_L21_MOD,                   0x34046)
+EVENT(PM_IERAT_XLATE_WR_16MPLUS,              0x040bc)
+EVENT(PM_IC_REQ_ALL,                          0x04888)
+EVENT(PM_DSLB_MISS,                           0x0d090)
+EVENT(PM_L3_MISS,                             0x1f082)
+EVENT(PM_LSU0_L1_PREF,                        0x0d0b8)
+EVENT(PM_VSU_SCALAR_SINGLE_ISSUED,            0x0b884)
+EVENT(PM_LSU1_DC_PREF_STREAM_CONFIRM_STRIDE,  0x0d0be)
+EVENT(PM_L2_INST,                             0x36080)
+EVENT(PM_VSU0_FRSP,                           0x0a0b4)
+EVENT(PM_FLUSH_DISP,                          0x02082)
+EVENT(PM_PTEG_FROM_L2MISS,                    0x4c058)
+EVENT(PM_VSU1_DQ_ISSUED,                      0x0b09a)
+EVENT(PM_CMPLU_STALL_LSU,                     0x20012)
+EVENT(PM_MRK_DATA_FROM_DMEM,                  0x1d04a)
+EVENT(PM_LSU_FLUSH_ULD,                       0x0c8b0)
+EVENT(PM_PTEG_FROM_LMEM,                      0x4c052)
+EVENT(PM_MRK_DERAT_MISS_16M,                  0x3d05c)
+EVENT(PM_THRD_ALL_RUN_CYC,                    0x2000c)
+EVENT(PM_MEM0_PREFETCH_DISP,                  0x20083)
+EVENT(PM_MRK_STALL_CMPLU_CYC_COUNT,           0x3003f)
+EVENT(PM_DATA_FROM_DL2L3_MOD,                 0x3c04c)
+EVENT(PM_VSU_FRSP,                            0x0a8b4)
+EVENT(PM_MRK_DATA_FROM_L21_MOD,               0x3d046)
+EVENT(PM_PMC1_OVERFLOW,                       0x20010)
+EVENT(PM_VSU0_SINGLE,                         0x0a0a8)
+EVENT(PM_MRK_PTEG_FROM_L3MISS,                0x2d058)
+EVENT(PM_MRK_PTEG_FROM_L31_SHR,               0x2d056)
+EVENT(PM_VSU0_VECTOR_SP_ISSUED,               0x0b090)
+EVENT(PM_VSU1_FEST,                           0x0a0ba)
+EVENT(PM_MRK_INST_DISP,                       0x20030)
+EVENT(PM_VSU0_COMPLEX_ISSUED,                 0x0b096)
+EVENT(PM_LSU1_FLUSH_UST,                      0x0c0b6)
+EVENT(PM_INST_CMPL,                           0x00002)
+EVENT(PM_FXU_IDLE,                            0x1000e)
+EVENT(PM_LSU0_FLUSH_ULD,                      0x0c0b0)
+EVENT(PM_MRK_DATA_FROM_DL2L3_MOD,             0x3d04c)
+EVENT(PM_LSU_LMQ_SRQ_EMPTY_ALL_CYC,           0x3001c)
+EVENT(PM_LSU1_REJECT_LMQ_FULL,                0x0c0a6)
+EVENT(PM_INST_PTEG_FROM_L21_MOD,              0x3e056)
+EVENT(PM_INST_FROM_RL2L3_MOD,                 0x14042)
+EVENT(PM_SHL_CREATED,                         0x05082)
+EVENT(PM_L2_ST_HIT,                           0x46182)
+EVENT(PM_DATA_FROM_DMEM,                      0x1c04a)
+EVENT(PM_L3_LD_MISS,                          0x2f082)
+EVENT(PM_FXU1_BUSY_FXU0_IDLE,                 0x4000e)
+EVENT(PM_DISP_CLB_HELD_RES,                   0x02094)
+EVENT(PM_L2_SN_SX_I_DONE,                     0x36382)
+EVENT(PM_GRP_CMPL,                            0x30004)
+EVENT(PM_STCX_CMPL,                           0x0c098)
+EVENT(PM_VSU0_2FLOP,                          0x0a098)
+EVENT(PM_L3_PREF_MISS,                        0x3f082)
+EVENT(PM_LSU_SRQ_SYNC_CYC,                    0x0d096)
+EVENT(PM_LSU_REJECT_ERAT_MISS,                0x20064)
+EVENT(PM_L1_ICACHE_MISS,                      0x200fc)
+EVENT(PM_LSU1_FLUSH_SRQ,                      0x0c0be)
+EVENT(PM_LD_REF_L1_LSU0,                      0x0c080)
+EVENT(PM_VSU0_FEST,                           0x0a0b8)
+EVENT(PM_VSU_VECTOR_SINGLE_ISSUED,            0x0b890)
+EVENT(PM_FREQ_UP,                             0x4000c)
+EVENT(PM_DATA_FROM_LMEM,                      0x3c04a)
+EVENT(PM_LSU1_LDX,                            0x0c08a)
+EVENT(PM_PMC3_OVERFLOW,                       0x40010)
+EVENT(PM_MRK_BR_MPRED,                        0x30036)
+EVENT(PM_SHL_MATCH,                           0x05086)
+EVENT(PM_MRK_BR_TAKEN,                        0x10036)
+EVENT(PM_CMPLU_STALL_BRU,                     0x4004e)
+EVENT(PM_ISLB_MISS,                           0x0d092)
+EVENT(PM_CYC,                                 0x0001e)
+EVENT(PM_DISP_HELD_THERMAL,                   0x30006)
+EVENT(PM_INST_PTEG_FROM_RL2L3_SHR,            0x2e054)
+EVENT(PM_LSU1_SRQ_STFWD,                      0x0c0a2)
+EVENT(PM_GCT_NOSLOT_BR_MPRED,                 0x4001a)
+EVENT(PM_1PLUS_PPC_CMPL,                      0x100f2)
+EVENT(PM_PTEG_FROM_DMEM,                      0x2c052)
+EVENT(PM_VSU_2FLOP,                           0x0a898)
+EVENT(PM_GCT_FULL_CYC,                        0x04086)
+EVENT(PM_MRK_DATA_FROM_L3_CYC,                0x40020)
+EVENT(PM_LSU_SRQ_S0_ALLOC,                    0x0d09d)
+EVENT(PM_MRK_DERAT_MISS_4K,                   0x1d05c)
+EVENT(PM_BR_MPRED_TA,                         0x040ae)
+EVENT(PM_INST_PTEG_FROM_L2MISS,               0x4e058)
+EVENT(PM_DPU_HELD_POWER,                      0x20006)
+EVENT(PM_RUN_INST_CMPL,                       0x400fa)
+EVENT(PM_MRK_VSU_FIN,                         0x30032)
+EVENT(PM_LSU_SRQ_S0_VALID,                    0x0d09c)
+EVENT(PM_GCT_EMPTY_CYC,                       0x20008)
+EVENT(PM_IOPS_DISP,                           0x30014)
+EVENT(PM_RUN_SPURR,                           0x10008)
+EVENT(PM_PTEG_FROM_L21_MOD,                   0x3c056)
+EVENT(PM_VSU0_1FLOP,                          0x0a080)
+EVENT(PM_SNOOP_TLBIE,                         0x0d0b2)
+EVENT(PM_DATA_FROM_L3MISS,                    0x2c048)
+EVENT(PM_VSU_SINGLE,                          0x0a8a8)
+EVENT(PM_DTLB_MISS_16G,                       0x1c05e)
+EVENT(PM_CMPLU_STALL_VECTOR,                  0x2001c)
+EVENT(PM_FLUSH,                               0x400f8)
+EVENT(PM_L2_LD_HIT,                           0x36182)
+EVENT(PM_NEST_PAIR2_AND,                      0x30883)
+EVENT(PM_VSU1_1FLOP,                          0x0a082)
+EVENT(PM_IC_PREF_REQ,                         0x0408a)
+EVENT(PM_L3_LD_HIT,                           0x2f080)
+EVENT(PM_GCT_NOSLOT_IC_MISS,                  0x2001a)
+EVENT(PM_DISP_HELD,                           0x10006)
+EVENT(PM_L2_LD,                               0x16080)
+EVENT(PM_LSU_FLUSH_SRQ,                       0x0c8bc)
+EVENT(PM_BC_PLUS_8_CONV,                      0x040b8)
+EVENT(PM_MRK_DATA_FROM_L31_MOD_CYC,           0x40026)
+EVENT(PM_CMPLU_STALL_VECTOR_LONG,             0x4004a)
+EVENT(PM_L2_RCST_BUSY_RC_FULL,                0x26282)
+EVENT(PM_TB_BIT_TRANS,                        0x300f8)
+EVENT(PM_THERMAL_MAX,                         0x40006)
+EVENT(PM_LSU1_FLUSH_ULD,                      0x0c0b2)
+EVENT(PM_LSU1_REJECT_LHS,                     0x0c0ae)
+EVENT(PM_LSU_LRQ_S0_ALLOC,                    0x0d09f)
+EVENT(PM_L3_CO_L31,                           0x4f080)
+EVENT(PM_POWER_EVENT4,                        0x4006e)
+EVENT(PM_DATA_FROM_L31_SHR,                   0x1c04e)
+EVENT(PM_BR_UNCOND,                           0x0409e)
+EVENT(PM_LSU1_DC_PREF_STREAM_ALLOC,           0x0d0aa)
+EVENT(PM_PMC4_REWIND,                         0x10020)
+EVENT(PM_L2_RCLD_DISP,                        0x16280)
+EVENT(PM_THRD_PRIO_2_3_CYC,                   0x040b2)
+EVENT(PM_MRK_PTEG_FROM_L2MISS,                0x4d058)
+EVENT(PM_IC_DEMAND_L2_BHT_REDIRECT,           0x04098)
+EVENT(PM_LSU_DERAT_MISS,                      0x200f6)
+EVENT(PM_IC_PREF_CANCEL_L2,                   0x04094)
+EVENT(PM_MRK_FIN_STALL_CYC_COUNT,             0x1003d)
+EVENT(PM_BR_PRED_CCACHE,                      0x040a0)
+EVENT(PM_GCT_UTIL_1_TO_2_SLOTS,               0x0209c)
+EVENT(PM_MRK_ST_CMPL_INT,                     0x30034)
+EVENT(PM_LSU_TWO_TABLEWALK_CYC,               0x0d0a6)
+EVENT(PM_MRK_DATA_FROM_L3MISS,                0x2d048)
+EVENT(PM_GCT_NOSLOT_CYC,                      0x100f8)
+EVENT(PM_LSU_SET_MPRED,                       0x0c0a8)
+EVENT(PM_FLUSH_DISP_TLBIE,                    0x0208a)
+EVENT(PM_VSU1_FCONV,                          0x0a0b2)
+EVENT(PM_DERAT_MISS_16G,                      0x4c05c)
+EVENT(PM_INST_FROM_LMEM,                      0x3404a)
+EVENT(PM_IC_DEMAND_L2_BR_REDIRECT,            0x0409a)
+EVENT(PM_CMPLU_STALL_SCALAR_LONG,             0x20018)
+EVENT(PM_INST_PTEG_FROM_L2,                   0x1e050)
+EVENT(PM_PTEG_FROM_L2,                        0x1c050)
+EVENT(PM_MRK_DATA_FROM_L21_SHR_CYC,           0x20024)
+EVENT(PM_MRK_DTLB_MISS_4K,                    0x2d05a)
+EVENT(PM_VSU0_FPSCR,                          0x0b09c)
+EVENT(PM_VSU1_VECT_DOUBLE_ISSUED,             0x0b082)
+EVENT(PM_MRK_PTEG_FROM_RL2L3_MOD,             0x1d052)
+EVENT(PM_MEM0_RQ_DISP,                        0x10083)
+EVENT(PM_L2_LD_MISS,                          0x26080)
+EVENT(PM_VMX_RESULT_SAT_1,                    0x0b0a0)
+EVENT(PM_L1_PREF,                             0x0d8b8)
+EVENT(PM_MRK_DATA_FROM_LMEM_CYC,              0x2002c)
+EVENT(PM_GRP_IC_MISS_NONSPEC,                 0x1000c)
+EVENT(PM_PB_NODE_PUMP,                        0x10081)
+EVENT(PM_SHL_MERGED,                          0x05084)
+EVENT(PM_NEST_PAIR1_ADD,                      0x20881)
+EVENT(PM_DATA_FROM_L3,                        0x1c048)
+EVENT(PM_LSU_FLUSH,                           0x0208e)
+EVENT(PM_LSU_SRQ_SYNC_COUNT,                  0x0d097)
+EVENT(PM_PMC2_OVERFLOW,                       0x30010)
+EVENT(PM_LSU_LDF,                             0x0c884)
+EVENT(PM_POWER_EVENT3,                        0x3006e)
+EVENT(PM_DISP_WT,                             0x30008)
+EVENT(PM_CMPLU_STALL_REJECT,                  0x40016)
+EVENT(PM_IC_BANK_CONFLICT,                    0x04082)
+EVENT(PM_BR_MPRED_CR_TA,                      0x048ae)
+EVENT(PM_L2_INST_MISS,                        0x36082)
+EVENT(PM_CMPLU_STALL_ERAT_MISS,               0x40018)
+EVENT(PM_NEST_PAIR2_ADD,                      0x30881)
+EVENT(PM_MRK_LSU_FLUSH,                       0x0d08c)
+EVENT(PM_L2_LDST,                             0x16880)
+EVENT(PM_INST_FROM_L31_SHR,                   0x1404e)
+EVENT(PM_VSU0_FIN,                            0x0a0bc)
+EVENT(PM_LARX_LSU,                            0x0c894)
+EVENT(PM_INST_FROM_RMEM,                      0x34042)
+EVENT(PM_DISP_CLB_HELD_TLBIE,                 0x02096)
+EVENT(PM_MRK_DATA_FROM_DMEM_CYC,              0x2002e)
+EVENT(PM_BR_PRED_CR,                          0x040a8)
+EVENT(PM_LSU_REJECT,                          0x10064)
+EVENT(PM_GCT_UTIL_3_TO_6_SLOTS,               0x0209e)
+EVENT(PM_CMPLU_STALL_END_GCT_NOSLOT,          0x10028)
+EVENT(PM_LSU0_REJECT_LMQ_FULL,                0x0c0a4)
+EVENT(PM_VSU_FEST,                            0x0a8b8)
+EVENT(PM_NEST_PAIR0_AND,                      0x10883)
+EVENT(PM_PTEG_FROM_L3,                        0x2c050)
+EVENT(PM_POWER_EVENT2,                        0x2006e)
+EVENT(PM_IC_PREF_CANCEL_PAGE,                 0x04090)
+EVENT(PM_VSU0_FSQRT_FDIV,                     0x0a088)
+EVENT(PM_MRK_GRP_CMPL,                        0x40030)
+EVENT(PM_VSU0_SCAL_DOUBLE_ISSUED,             0x0b088)
+EVENT(PM_GRP_DISP,                            0x3000a)
+EVENT(PM_LSU0_LDX,                            0x0c088)
+EVENT(PM_DATA_FROM_L2,                        0x1c040)
+EVENT(PM_MRK_DATA_FROM_RL2L3_MOD,             0x1d042)
+EVENT(PM_LD_REF_L1,                           0x0c880)
+EVENT(PM_VSU0_VECT_DOUBLE_ISSUED,             0x0b080)
+EVENT(PM_VSU1_2FLOP_DOUBLE,                   0x0a08e)
+EVENT(PM_THRD_PRIO_6_7_CYC,                   0x040b6)
+EVENT(PM_BC_PLUS_8_RSLV_TAKEN,                0x040ba)
+EVENT(PM_BR_MPRED_CR,                         0x040ac)
+EVENT(PM_L3_CO_MEM,                           0x4f082)
+EVENT(PM_LD_MISS_L1,                          0x400f0)
+EVENT(PM_DATA_FROM_RL2L3_MOD,                 0x1c042)
+EVENT(PM_LSU_SRQ_FULL_CYC,                    0x1001a)
+EVENT(PM_TABLEWALK_CYC,                       0x10026)
+EVENT(PM_MRK_PTEG_FROM_RMEM,                  0x3d052)
+EVENT(PM_LSU_SRQ_STFWD,                       0x0c8a0)
+EVENT(PM_INST_PTEG_FROM_RMEM,                 0x3e052)
+EVENT(PM_FXU0_FIN,                            0x10004)
+EVENT(PM_LSU1_L1_SW_PREF,                     0x0c09e)
+EVENT(PM_PTEG_FROM_L31_MOD,                   0x1c054)
+EVENT(PM_PMC5_OVERFLOW,                       0x10024)
+EVENT(PM_LD_REF_L1_LSU1,                      0x0c082)
+EVENT(PM_INST_PTEG_FROM_L21_SHR,              0x4e056)
+EVENT(PM_CMPLU_STALL_THRD,                    0x1001c)
+EVENT(PM_DATA_FROM_RMEM,                      0x3c042)
+EVENT(PM_VSU0_SCAL_SINGLE_ISSUED,             0x0b084)
+EVENT(PM_BR_MPRED_LSTACK,                     0x040a6)
+EVENT(PM_MRK_DATA_FROM_RL2L3_MOD_CYC,         0x40028)
+EVENT(PM_LSU0_FLUSH_UST,                      0x0c0b4)
+EVENT(PM_LSU_NCST,                            0x0c090)
+EVENT(PM_BR_TAKEN,                            0x20004)
+EVENT(PM_INST_PTEG_FROM_LMEM,                 0x4e052)
+EVENT(PM_GCT_NOSLOT_BR_MPRED_IC_MISS,         0x4001c)
+EVENT(PM_DTLB_MISS_4K,                        0x2c05a)
+EVENT(PM_PMC4_SAVED,                          0x30022)
+EVENT(PM_VSU1_PERMUTE_ISSUED,                 0x0b092)
+EVENT(PM_SLB_MISS,                            0x0d890)
+EVENT(PM_LSU1_FLUSH_LRQ,                      0x0c0ba)
+EVENT(PM_DTLB_MISS,                           0x300fc)
+EVENT(PM_VSU1_FRSP,                           0x0a0b6)
+EVENT(PM_VSU_VECTOR_DOUBLE_ISSUED,            0x0b880)
+EVENT(PM_L2_CASTOUT_SHR,                      0x16182)
+EVENT(PM_DATA_FROM_DL2L3_SHR,                 0x3c044)
+EVENT(PM_VSU1_STF,                            0x0b08e)
+EVENT(PM_ST_FIN,                              0x200f0)
+EVENT(PM_PTEG_FROM_L21_SHR,                   0x4c056)
+EVENT(PM_L2_LOC_GUESS_WRONG,                  0x26480)
+EVENT(PM_MRK_STCX_FAIL,                       0x0d08e)
+EVENT(PM_LSU0_REJECT_LHS,                     0x0c0ac)
+EVENT(PM_IC_PREF_CANCEL_HIT,                  0x04092)
+EVENT(PM_L3_PREF_BUSY,                        0x4f080)
+EVENT(PM_MRK_BRU_FIN,                         0x2003a)
+EVENT(PM_LSU1_NCLD,                           0x0c08e)
+EVENT(PM_INST_PTEG_FROM_L31_MOD,              0x1e054)
+EVENT(PM_LSU_NCLD,                            0x0c88c)
+EVENT(PM_LSU_LDX,                             0x0c888)
+EVENT(PM_L2_LOC_GUESS_CORRECT,                0x16480)
+EVENT(PM_THRESH_TIMEO,                        0x10038)
+EVENT(PM_L3_PREF_ST,                          0x0d0ae)
+EVENT(PM_DISP_CLB_HELD_SYNC,                  0x02098)
+EVENT(PM_VSU_SIMPLE_ISSUED,                   0x0b894)
+EVENT(PM_VSU1_SINGLE,                         0x0a0aa)
+EVENT(PM_DATA_TABLEWALK_CYC,                  0x3001a)
+EVENT(PM_L2_RC_ST_DONE,                       0x36380)
+EVENT(PM_MRK_PTEG_FROM_L21_MOD,               0x3d056)
+EVENT(PM_LARX_LSU1,                           0x0c096)
+EVENT(PM_MRK_DATA_FROM_RMEM,                  0x3d042)
+EVENT(PM_DISP_CLB_HELD,                       0x02090)
+EVENT(PM_DERAT_MISS_4K,                       0x1c05c)
+EVENT(PM_L2_RCLD_DISP_FAIL_ADDR,              0x16282)
+EVENT(PM_SEG_EXCEPTION,                       0x028a4)
+EVENT(PM_FLUSH_DISP_SB,                       0x0208c)
+EVENT(PM_L2_DC_INV,                           0x26182)
+EVENT(PM_PTEG_FROM_DL2L3_MOD,                 0x4c054)
+EVENT(PM_DSEG,                                0x020a6)
+EVENT(PM_BR_PRED_LSTACK,                      0x040a2)
+EVENT(PM_VSU0_STF,                            0x0b08c)
+EVENT(PM_LSU_FX_FIN,                          0x10066)
+EVENT(PM_DERAT_MISS_16M,                      0x3c05c)
+EVENT(PM_MRK_PTEG_FROM_DL2L3_MOD,             0x4d054)
+EVENT(PM_GCT_UTIL_11_PLUS_SLOTS,              0x020a2)
+EVENT(PM_INST_FROM_L3,                        0x14048)
+EVENT(PM_MRK_IFU_FIN,                         0x3003a)
+EVENT(PM_ITLB_MISS,                           0x400fc)
+EVENT(PM_VSU_STF,                             0x0b88c)
+EVENT(PM_LSU_FLUSH_UST,                       0x0c8b4)
+EVENT(PM_L2_LDST_MISS,                        0x26880)
+EVENT(PM_FXU1_FIN,                            0x40004)
+EVENT(PM_SHL_DEALLOCATED,                     0x05080)
+EVENT(PM_L2_SN_M_WR_DONE,                     0x46382)
+EVENT(PM_LSU_REJECT_SET_MPRED,                0x0c8a8)
+EVENT(PM_L3_PREF_LD,                          0x0d0ac)
+EVENT(PM_L2_SN_M_RD_DONE,                     0x46380)
+EVENT(PM_MRK_DERAT_MISS_16G,                  0x4d05c)
+EVENT(PM_VSU_FCONV,                           0x0a8b0)
+EVENT(PM_ANY_THRD_RUN_CYC,                    0x100fa)
+EVENT(PM_LSU_LMQ_FULL_CYC,                    0x0d0a4)
+EVENT(PM_MRK_LSU_REJECT_LHS,                  0x0d082)
+EVENT(PM_MRK_LD_MISS_L1_CYC,                  0x4003e)
+EVENT(PM_MRK_DATA_FROM_L2_CYC,                0x20020)
+EVENT(PM_INST_IMC_MATCH_DISP,                 0x30016)
+EVENT(PM_MRK_DATA_FROM_RMEM_CYC,              0x4002c)
+EVENT(PM_VSU0_SIMPLE_ISSUED,                  0x0b094)
+EVENT(PM_CMPLU_STALL_DIV,                     0x40014)
+EVENT(PM_MRK_PTEG_FROM_RL2L3_SHR,             0x2d054)
+EVENT(PM_VSU_FMA_DOUBLE,                      0x0a890)
+EVENT(PM_VSU_4FLOP,                           0x0a89c)
+EVENT(PM_VSU1_FIN,                            0x0a0be)
+EVENT(PM_NEST_PAIR1_AND,                      0x20883)
+EVENT(PM_INST_PTEG_FROM_RL2L3_MOD,            0x1e052)
+EVENT(PM_RUN_CYC,                             0x200f4)
+EVENT(PM_PTEG_FROM_RMEM,                      0x3c052)
+EVENT(PM_LSU_LRQ_S0_VALID,                    0x0d09e)
+EVENT(PM_LSU0_LDF,                            0x0c084)
+EVENT(PM_FLUSH_COMPLETION,                    0x30012)
+EVENT(PM_ST_MISS_L1,                          0x300f0)
+EVENT(PM_L2_NODE_PUMP,                        0x36480)
+EVENT(PM_INST_FROM_DL2L3_SHR,                 0x34044)
+EVENT(PM_MRK_STALL_CMPLU_CYC,                 0x3003e)
+EVENT(PM_VSU1_DENORM,                         0x0a0ae)
+EVENT(PM_MRK_DATA_FROM_L31_SHR_CYC,           0x20026)
+EVENT(PM_NEST_PAIR0_ADD,                      0x10881)
+EVENT(PM_INST_FROM_L3MISS,                    0x24048)
+EVENT(PM_EE_OFF_EXT_INT,                      0x02080)
+EVENT(PM_INST_PTEG_FROM_DMEM,                 0x2e052)
+EVENT(PM_INST_FROM_DL2L3_MOD,                 0x3404c)
+EVENT(PM_PMC6_OVERFLOW,                       0x30024)
+EVENT(PM_VSU_2FLOP_DOUBLE,                    0x0a88c)
+EVENT(PM_TLB_MISS,                            0x20066)
+EVENT(PM_FXU_BUSY,                            0x2000e)
+EVENT(PM_L2_RCLD_DISP_FAIL_OTHER,             0x26280)
+EVENT(PM_LSU_REJECT_LMQ_FULL,                 0x0c8a4)
+EVENT(PM_IC_RELOAD_SHR,                       0x04096)
+EVENT(PM_GRP_MRK,                             0x10031)
+EVENT(PM_MRK_ST_NEST,                         0x20034)
+EVENT(PM_VSU1_FSQRT_FDIV,                     0x0a08a)
+EVENT(PM_LSU0_FLUSH_LRQ,                      0x0c0b8)
+EVENT(PM_LARX_LSU0,                           0x0c094)
+EVENT(PM_IBUF_FULL_CYC,                       0x04084)
+EVENT(PM_MRK_DATA_FROM_DL2L3_SHR_CYC,         0x2002a)
+EVENT(PM_LSU_DC_PREF_STREAM_ALLOC,            0x0d8a8)
+EVENT(PM_GRP_MRK_CYC,                         0x10030)
+EVENT(PM_MRK_DATA_FROM_RL2L3_SHR_CYC,         0x20028)
+EVENT(PM_L2_GLOB_GUESS_CORRECT,               0x16482)
+EVENT(PM_LSU_REJECT_LHS,                      0x0c8ac)
+EVENT(PM_MRK_DATA_FROM_LMEM,                  0x3d04a)
+EVENT(PM_INST_PTEG_FROM_L3,                   0x2e050)
+EVENT(PM_FREQ_DOWN,                           0x3000c)
+EVENT(PM_PB_RETRY_NODE_PUMP,                  0x30081)
+EVENT(PM_INST_FROM_RL2L3_SHR,                 0x1404c)
+EVENT(PM_MRK_INST_ISSUED,                     0x10032)
+EVENT(PM_PTEG_FROM_L3MISS,                    0x2c058)
+EVENT(PM_RUN_PURR,                            0x400f4)
+EVENT(PM_MRK_GRP_IC_MISS,                     0x40038)
+EVENT(PM_MRK_DATA_FROM_L3,                    0x1d048)
+EVENT(PM_CMPLU_STALL_DCACHE_MISS,             0x20016)
+EVENT(PM_PTEG_FROM_RL2L3_SHR,                 0x2c054)
+EVENT(PM_LSU_FLUSH_LRQ,                       0x0c8b8)
+EVENT(PM_MRK_DERAT_MISS_64K,                  0x2d05c)
+EVENT(PM_INST_PTEG_FROM_DL2L3_MOD,            0x4e054)
+EVENT(PM_L2_ST_MISS,                          0x26082)
+EVENT(PM_MRK_PTEG_FROM_L21_SHR,               0x4d056)
+EVENT(PM_LWSYNC,                              0x0d094)
+EVENT(PM_LSU0_DC_PREF_STREAM_CONFIRM_STRIDE,  0x0d0bc)
+EVENT(PM_MRK_LSU_FLUSH_LRQ,                   0x0d088)
+EVENT(PM_INST_IMC_MATCH_CMPL,                 0x100f0)
+EVENT(PM_NEST_PAIR3_AND,                      0x40883)
+EVENT(PM_PB_RETRY_SYS_PUMP,                   0x40081)
+EVENT(PM_MRK_INST_FIN,                        0x30030)
+EVENT(PM_MRK_PTEG_FROM_DL2L3_SHR,             0x3d054)
+EVENT(PM_INST_FROM_L31_MOD,                   0x14044)
+EVENT(PM_MRK_DTLB_MISS_64K,                   0x3d05e)
+EVENT(PM_LSU_FIN,                             0x30066)
+EVENT(PM_MRK_LSU_REJECT,                      0x40064)
+EVENT(PM_L2_CO_FAIL_BUSY,                     0x16382)
+EVENT(PM_MEM0_WQ_DISP,                        0x40083)
+EVENT(PM_DATA_FROM_L31_MOD,                   0x1c044)
+EVENT(PM_THERMAL_WARN,                        0x10016)
+EVENT(PM_VSU0_4FLOP,                          0x0a09c)
+EVENT(PM_BR_MPRED_CCACHE,                     0x040a4)
+EVENT(PM_CMPLU_STALL_IFU,                     0x4004c)
+EVENT(PM_L1_DEMAND_WRITE,                     0x0408c)
+EVENT(PM_FLUSH_BR_MPRED,                      0x02084)
+EVENT(PM_MRK_DTLB_MISS_16G,                   0x1d05e)
+EVENT(PM_MRK_PTEG_FROM_DMEM,                  0x2d052)
+EVENT(PM_L2_RCST_DISP,                        0x36280)
+EVENT(PM_CMPLU_STALL,                         0x4000a)
+EVENT(PM_LSU_PARTIAL_CDF,                     0x0c0aa)
+EVENT(PM_DISP_CLB_HELD_SB,                    0x020a8)
+EVENT(PM_VSU0_FMA_DOUBLE,                     0x0a090)
+EVENT(PM_FXU0_BUSY_FXU1_IDLE,                 0x3000e)
+EVENT(PM_IC_DEMAND_CYC,                       0x10018)
+EVENT(PM_MRK_DATA_FROM_L21_SHR,               0x3d04e)
+EVENT(PM_MRK_LSU_FLUSH_UST,                   0x0d086)
+EVENT(PM_INST_PTEG_FROM_L3MISS,               0x2e058)
+EVENT(PM_VSU_DENORM,                          0x0a8ac)
+EVENT(PM_MRK_LSU_PARTIAL_CDF,                 0x0d080)
+EVENT(PM_INST_FROM_L21_SHR,                   0x3404e)
+EVENT(PM_IC_PREF_WRITE,                       0x0408e)
+EVENT(PM_BR_PRED,                             0x0409c)
+EVENT(PM_INST_FROM_DMEM,                      0x1404a)
+EVENT(PM_IC_PREF_CANCEL_ALL,                  0x04890)
+EVENT(PM_LSU_DC_PREF_STREAM_CONFIRM,          0x0d8b4)
+EVENT(PM_MRK_LSU_FLUSH_SRQ,                   0x0d08a)
+EVENT(PM_MRK_FIN_STALL_CYC,                   0x1003c)
+EVENT(PM_L2_RCST_DISP_FAIL_OTHER,             0x46280)
+EVENT(PM_VSU1_DD_ISSUED,                      0x0b098)
+EVENT(PM_PTEG_FROM_L31_SHR,                   0x2c056)
+EVENT(PM_DATA_FROM_L21_SHR,                   0x3c04e)
+EVENT(PM_LSU0_NCLD,                           0x0c08c)
+EVENT(PM_VSU1_4FLOP,                          0x0a09e)
+EVENT(PM_VSU1_8FLOP,                          0x0a0a2)
+EVENT(PM_VSU_8FLOP,                           0x0a8a0)
+EVENT(PM_LSU_LMQ_SRQ_EMPTY_CYC,               0x2003e)
+EVENT(PM_DTLB_MISS_64K,                       0x3c05e)
+EVENT(PM_THRD_CONC_RUN_INST,                  0x300f4)
+EVENT(PM_MRK_PTEG_FROM_L2,                    0x1d050)
+EVENT(PM_PB_SYS_PUMP,                         0x20081)
+EVENT(PM_VSU_FIN,                             0x0a8bc)
+EVENT(PM_MRK_DATA_FROM_L31_MOD,               0x1d044)
+EVENT(PM_THRD_PRIO_0_1_CYC,                   0x040b0)
+EVENT(PM_DERAT_MISS_64K,                      0x2c05c)
+EVENT(PM_PMC2_REWIND,                         0x30020)
+EVENT(PM_INST_FROM_L2,                        0x14040)
+EVENT(PM_GRP_BR_MPRED_NONSPEC,                0x1000a)
+EVENT(PM_INST_DISP,                           0x200f2)
+EVENT(PM_MEM0_RD_CANCEL_TOTAL,                0x30083)
+EVENT(PM_LSU0_DC_PREF_STREAM_CONFIRM,         0x0d0b4)
+EVENT(PM_L1_DCACHE_RELOAD_VALID,              0x300f6)
+EVENT(PM_VSU_SCALAR_DOUBLE_ISSUED,            0x0b888)
+EVENT(PM_L3_PREF_HIT,                         0x3f080)
+EVENT(PM_MRK_PTEG_FROM_L31_MOD,               0x1d054)
+EVENT(PM_CMPLU_STALL_STORE,                   0x2004a)
+EVENT(PM_MRK_FXU_FIN,                         0x20038)
+EVENT(PM_PMC4_OVERFLOW,                       0x10010)
+EVENT(PM_MRK_PTEG_FROM_L3,                    0x2d050)
+EVENT(PM_LSU0_LMQ_LHR_MERGE,                  0x0d098)
+EVENT(PM_BTAC_HIT,                            0x0508a)
+EVENT(PM_L3_RD_BUSY,                          0x4f082)
+EVENT(PM_LSU0_L1_SW_PREF,                     0x0c09c)
+EVENT(PM_INST_FROM_L2MISS,                    0x44048)
+EVENT(PM_LSU0_DC_PREF_STREAM_ALLOC,           0x0d0a8)
+EVENT(PM_L2_ST,                               0x16082)
+EVENT(PM_VSU0_DENORM,                         0x0a0ac)
+EVENT(PM_MRK_DATA_FROM_DL2L3_SHR,             0x3d044)
+EVENT(PM_BR_PRED_CR_TA,                       0x048aa)
+EVENT(PM_VSU0_FCONV,                          0x0a0b0)
+EVENT(PM_MRK_LSU_FLUSH_ULD,                   0x0d084)
+EVENT(PM_BTAC_MISS,                           0x05088)
+EVENT(PM_MRK_LD_MISS_EXPOSED_CYC_COUNT,       0x1003f)
+EVENT(PM_MRK_DATA_FROM_L2,                    0x1d040)
+EVENT(PM_LSU_DCACHE_RELOAD_VALID,             0x0d0a2)
+EVENT(PM_VSU_FMA,                             0x0a884)
+EVENT(PM_LSU0_FLUSH_SRQ,                      0x0c0bc)
+EVENT(PM_LSU1_L1_PREF,                        0x0d0ba)
+EVENT(PM_IOPS_CMPL,                           0x10014)
+EVENT(PM_L2_SYS_PUMP,                         0x36482)
+EVENT(PM_L2_RCLD_BUSY_RC_FULL,                0x46282)
+EVENT(PM_LSU_LMQ_S0_ALLOC,                    0x0d0a1)
+EVENT(PM_FLUSH_DISP_SYNC,                     0x02088)
+EVENT(PM_MRK_DATA_FROM_DL2L3_MOD_CYC,         0x4002a)
+EVENT(PM_L2_IC_INV,                           0x26180)
+EVENT(PM_MRK_DATA_FROM_L21_MOD_CYC,           0x40024)
+EVENT(PM_L3_PREF_LDST,                        0x0d8ac)
+EVENT(PM_LSU_SRQ_EMPTY_CYC,                   0x40008)
+EVENT(PM_LSU_LMQ_S0_VALID,                    0x0d0a0)
+EVENT(PM_FLUSH_PARTIAL,                       0x02086)
+EVENT(PM_VSU1_FMA_DOUBLE,                     0x0a092)
+EVENT(PM_1PLUS_PPC_DISP,                      0x400f2)
+EVENT(PM_DATA_FROM_L2MISS,                    0x200fe)
+EVENT(PM_SUSPENDED,                           0x00000)
+EVENT(PM_VSU0_FMA,                            0x0a084)
+EVENT(PM_CMPLU_STALL_SCALAR,                  0x40012)
+EVENT(PM_STCX_FAIL,                           0x0c09a)
+EVENT(PM_VSU0_FSQRT_FDIV_DOUBLE,              0x0a094)
+EVENT(PM_DC_PREF_DST,                         0x0d0b0)
+EVENT(PM_VSU1_SCAL_SINGLE_ISSUED,             0x0b086)
+EVENT(PM_L3_HIT,                              0x1f080)
+EVENT(PM_L2_GLOB_GUESS_WRONG,                 0x26482)
+EVENT(PM_MRK_DFU_FIN,                         0x20032)
+EVENT(PM_INST_FROM_L1,                        0x04080)
+EVENT(PM_BRU_FIN,                             0x10068)
+EVENT(PM_IC_DEMAND_REQ,                       0x04088)
+EVENT(PM_VSU1_FSQRT_FDIV_DOUBLE,              0x0a096)
+EVENT(PM_VSU1_FMA,                            0x0a086)
+EVENT(PM_MRK_LD_MISS_L1,                      0x20036)
+EVENT(PM_VSU0_2FLOP_DOUBLE,                   0x0a08c)
+EVENT(PM_LSU_DC_PREF_STRIDED_STREAM_CONFIRM,  0x0d8bc)
+EVENT(PM_INST_PTEG_FROM_L31_SHR,              0x2e056)
+EVENT(PM_MRK_LSU_REJECT_ERAT_MISS,            0x30064)
+EVENT(PM_MRK_DATA_FROM_L2MISS,                0x4d048)
+EVENT(PM_DATA_FROM_RL2L3_SHR,                 0x1c04c)
+EVENT(PM_INST_FROM_PREF,                      0x14046)
+EVENT(PM_VSU1_SQ,                             0x0b09e)
+EVENT(PM_L2_LD_DISP,                          0x36180)
+EVENT(PM_L2_DISP_ALL,                         0x46080)
+EVENT(PM_THRD_GRP_CMPL_BOTH_CYC,              0x10012)
+EVENT(PM_VSU_FSQRT_FDIV_DOUBLE,               0x0a894)
+EVENT(PM_BR_MPRED,                            0x400f6)
+EVENT(PM_INST_PTEG_FROM_DL2L3_SHR,            0x3e054)
+EVENT(PM_VSU_1FLOP,                           0x0a880)
+EVENT(PM_HV_CYC,                              0x2000a)
+EVENT(PM_MRK_LSU_FIN,                         0x40032)
+EVENT(PM_MRK_DATA_FROM_RL2L3_SHR,             0x1d04c)
+EVENT(PM_DTLB_MISS_16M,                       0x4c05e)
+EVENT(PM_LSU1_LMQ_LHR_MERGE,                  0x0d09a)
+EVENT(PM_IFU_FIN,                             0x40066)
diff --git a/arch/powerpc/perf/power7-pmu.c b/arch/powerpc/perf/power7-pmu.c
index d1821b8..56c67bc 100644
--- a/arch/powerpc/perf/power7-pmu.c
+++ b/arch/powerpc/perf/power7-pmu.c
@@ -53,37 +53,13 @@
 /*
  * Power7 event codes.
  */
-#define	PME_PM_CYC			0x1e
-#define	PME_PM_GCT_NOSLOT_CYC		0x100f8
-#define	PME_PM_CMPLU_STALL		0x4000a
-#define	PME_PM_INST_CMPL		0x2
-#define	PME_PM_LD_REF_L1		0xc880
-#define	PME_PM_LD_MISS_L1		0x400f0
-#define	PME_PM_BRU_FIN			0x10068
-#define	PME_PM_BR_MPRED			0x400f6
-
-#define PME_PM_CMPLU_STALL_FXU			0x20014
-#define PME_PM_CMPLU_STALL_DIV			0x40014
-#define PME_PM_CMPLU_STALL_SCALAR		0x40012
-#define PME_PM_CMPLU_STALL_SCALAR_LONG		0x20018
-#define PME_PM_CMPLU_STALL_VECTOR		0x2001c
-#define PME_PM_CMPLU_STALL_VECTOR_LONG		0x4004a
-#define PME_PM_CMPLU_STALL_LSU			0x20012
-#define PME_PM_CMPLU_STALL_REJECT		0x40016
-#define PME_PM_CMPLU_STALL_ERAT_MISS		0x40018
-#define PME_PM_CMPLU_STALL_DCACHE_MISS		0x20016
-#define PME_PM_CMPLU_STALL_STORE		0x2004a
-#define PME_PM_CMPLU_STALL_THRD			0x1001c
-#define PME_PM_CMPLU_STALL_IFU			0x4004c
-#define PME_PM_CMPLU_STALL_BRU			0x4004e
-#define PME_PM_GCT_NOSLOT_IC_MISS		0x2001a
-#define PME_PM_GCT_NOSLOT_BR_MPRED		0x4001a
-#define PME_PM_GCT_NOSLOT_BR_MPRED_IC_MISS	0x4001c
-#define PME_PM_GRP_CMPL				0x30004
-#define PME_PM_1PLUS_PPC_CMPL			0x100f2
-#define PME_PM_CMPLU_STALL_DFU			0x2003c
-#define PME_PM_RUN_CYC				0x200f4
-#define PME_PM_RUN_INST_CMPL			0x400fa
+#define EVENT(_name, _code) \
+	PME_##_name = _code,
+
+enum {
+#include "power7-events-list.h"
+};
+#undef EVENT
 
 /*
  * Layout of constraint bits:
@@ -398,96 +374,36 @@ static int power7_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
 };
 
 
-GENERIC_EVENT_ATTR(cpu-cycles,			CYC);
-GENERIC_EVENT_ATTR(stalled-cycles-frontend,	GCT_NOSLOT_CYC);
-GENERIC_EVENT_ATTR(stalled-cycles-backend,	CMPLU_STALL);
-GENERIC_EVENT_ATTR(instructions,		INST_CMPL);
-GENERIC_EVENT_ATTR(cache-references,		LD_REF_L1);
-GENERIC_EVENT_ATTR(cache-misses,		LD_MISS_L1);
-GENERIC_EVENT_ATTR(branch-instructions,		BRU_FIN);
-GENERIC_EVENT_ATTR(branch-misses,		BR_MPRED);
-
-POWER_EVENT_ATTR(CYC,				CYC);
-POWER_EVENT_ATTR(GCT_NOSLOT_CYC,		GCT_NOSLOT_CYC);
-POWER_EVENT_ATTR(CMPLU_STALL,			CMPLU_STALL);
-POWER_EVENT_ATTR(INST_CMPL,			INST_CMPL);
-POWER_EVENT_ATTR(LD_REF_L1,			LD_REF_L1);
-POWER_EVENT_ATTR(LD_MISS_L1,			LD_MISS_L1);
-POWER_EVENT_ATTR(BRU_FIN,			BRU_FIN)
-POWER_EVENT_ATTR(BR_MPRED,			BR_MPRED);
-
-POWER_EVENT_ATTR(CMPLU_STALL_FXU,		CMPLU_STALL_FXU);
-POWER_EVENT_ATTR(CMPLU_STALL_DIV,		CMPLU_STALL_DIV);
-POWER_EVENT_ATTR(CMPLU_STALL_SCALAR,		CMPLU_STALL_SCALAR);
-POWER_EVENT_ATTR(CMPLU_STALL_SCALAR_LONG,	CMPLU_STALL_SCALAR_LONG);
-POWER_EVENT_ATTR(CMPLU_STALL_VECTOR,		CMPLU_STALL_VECTOR);
-POWER_EVENT_ATTR(CMPLU_STALL_VECTOR_LONG,	CMPLU_STALL_VECTOR_LONG);
-POWER_EVENT_ATTR(CMPLU_STALL_LSU,		CMPLU_STALL_LSU);
-POWER_EVENT_ATTR(CMPLU_STALL_REJECT,		CMPLU_STALL_REJECT);
-
-POWER_EVENT_ATTR(CMPLU_STALL_ERAT_MISS,		CMPLU_STALL_ERAT_MISS);
-POWER_EVENT_ATTR(CMPLU_STALL_DCACHE_MISS,	CMPLU_STALL_DCACHE_MISS);
-POWER_EVENT_ATTR(CMPLU_STALL_STORE,		CMPLU_STALL_STORE);
-POWER_EVENT_ATTR(CMPLU_STALL_THRD,		CMPLU_STALL_THRD);
-POWER_EVENT_ATTR(CMPLU_STALL_IFU,		CMPLU_STALL_IFU);
-POWER_EVENT_ATTR(CMPLU_STALL_BRU,		CMPLU_STALL_BRU);
-POWER_EVENT_ATTR(GCT_NOSLOT_IC_MISS,		GCT_NOSLOT_IC_MISS);
-
-POWER_EVENT_ATTR(GCT_NOSLOT_BR_MPRED,		GCT_NOSLOT_BR_MPRED);
-POWER_EVENT_ATTR(GCT_NOSLOT_BR_MPRED_IC_MISS,	GCT_NOSLOT_BR_MPRED_IC_MISS);
-POWER_EVENT_ATTR(GRP_CMPL,			GRP_CMPL);
-POWER_EVENT_ATTR(1PLUS_PPC_CMPL,		1PLUS_PPC_CMPL);
-POWER_EVENT_ATTR(CMPLU_STALL_DFU,		CMPLU_STALL_DFU);
-POWER_EVENT_ATTR(RUN_CYC,			RUN_CYC);
-POWER_EVENT_ATTR(RUN_INST_CMPL,			RUN_INST_CMPL);
+GENERIC_EVENT_ATTR(cpu-cycles,			PM_CYC);
+GENERIC_EVENT_ATTR(stalled-cycles-frontend,	PM_GCT_NOSLOT_CYC);
+GENERIC_EVENT_ATTR(stalled-cycles-backend,	PM_CMPLU_STALL);
+GENERIC_EVENT_ATTR(instructions,		PM_INST_CMPL);
+GENERIC_EVENT_ATTR(cache-references,		PM_LD_REF_L1);
+GENERIC_EVENT_ATTR(cache-misses,		PM_LD_MISS_L1);
+GENERIC_EVENT_ATTR(branch-instructions,		PM_BRU_FIN);
+GENERIC_EVENT_ATTR(branch-misses,		PM_BR_MPRED);
+
+#define EVENT(_name, _code)     POWER_EVENT_ATTR(_name, _name);
+#include "power7-events-list.h"
+#undef EVENT
+
+#define EVENT(_name, _code)     POWER_EVENT_PTR(_name),
 
 static struct attribute *power7_events_attr[] = {
-	GENERIC_EVENT_PTR(CYC),
-	GENERIC_EVENT_PTR(GCT_NOSLOT_CYC),
-	GENERIC_EVENT_PTR(CMPLU_STALL),
-	GENERIC_EVENT_PTR(INST_CMPL),
-	GENERIC_EVENT_PTR(LD_REF_L1),
-	GENERIC_EVENT_PTR(LD_MISS_L1),
-	GENERIC_EVENT_PTR(BRU_FIN),
-	GENERIC_EVENT_PTR(BR_MPRED),
-
-	POWER_EVENT_PTR(CYC),
-	POWER_EVENT_PTR(GCT_NOSLOT_CYC),
-	POWER_EVENT_PTR(CMPLU_STALL),
-	POWER_EVENT_PTR(INST_CMPL),
-	POWER_EVENT_PTR(LD_REF_L1),
-	POWER_EVENT_PTR(LD_MISS_L1),
-	POWER_EVENT_PTR(BRU_FIN),
-	POWER_EVENT_PTR(BR_MPRED),
-
-	POWER_EVENT_PTR(CMPLU_STALL_FXU),
-	POWER_EVENT_PTR(CMPLU_STALL_DIV),
-	POWER_EVENT_PTR(CMPLU_STALL_SCALAR),
-	POWER_EVENT_PTR(CMPLU_STALL_SCALAR_LONG),
-	POWER_EVENT_PTR(CMPLU_STALL_VECTOR),
-	POWER_EVENT_PTR(CMPLU_STALL_VECTOR_LONG),
-	POWER_EVENT_PTR(CMPLU_STALL_LSU),
-	POWER_EVENT_PTR(CMPLU_STALL_REJECT),
-
-	POWER_EVENT_PTR(CMPLU_STALL_ERAT_MISS),
-	POWER_EVENT_PTR(CMPLU_STALL_DCACHE_MISS),
-	POWER_EVENT_PTR(CMPLU_STALL_STORE),
-	POWER_EVENT_PTR(CMPLU_STALL_THRD),
-	POWER_EVENT_PTR(CMPLU_STALL_IFU),
-	POWER_EVENT_PTR(CMPLU_STALL_BRU),
-	POWER_EVENT_PTR(GCT_NOSLOT_IC_MISS),
-	POWER_EVENT_PTR(GCT_NOSLOT_BR_MPRED),
-
-	POWER_EVENT_PTR(GCT_NOSLOT_BR_MPRED_IC_MISS),
-	POWER_EVENT_PTR(GRP_CMPL),
-	POWER_EVENT_PTR(1PLUS_PPC_CMPL),
-	POWER_EVENT_PTR(CMPLU_STALL_DFU),
-	POWER_EVENT_PTR(RUN_CYC),
-	POWER_EVENT_PTR(RUN_INST_CMPL),
+	GENERIC_EVENT_PTR(PM_CYC),
+	GENERIC_EVENT_PTR(PM_GCT_NOSLOT_CYC),
+	GENERIC_EVENT_PTR(PM_CMPLU_STALL),
+	GENERIC_EVENT_PTR(PM_INST_CMPL),
+	GENERIC_EVENT_PTR(PM_LD_REF_L1),
+	GENERIC_EVENT_PTR(PM_LD_MISS_L1),
+	GENERIC_EVENT_PTR(PM_BRU_FIN),
+	GENERIC_EVENT_PTR(PM_BR_MPRED),
+
+	#include "power7-events-list.h"
+	#undef EVENT
 	NULL
 };
 
-
 static struct attribute_group power7_pmu_events_group = {
 	.name = "events",
 	.attrs = power7_events_attr,
diff --git a/arch/powerpc/perf/power8-pmu.c b/arch/powerpc/perf/power8-pmu.c
index 2ee4a70..a3f7abd 100644
--- a/arch/powerpc/perf/power8-pmu.c
+++ b/arch/powerpc/perf/power8-pmu.c
@@ -199,6 +199,7 @@
 #define MMCR1_UNIT_SHIFT(pmc)		(60 - (4 * ((pmc) - 1)))
 #define MMCR1_COMBINE_SHIFT(pmc)	(35 - ((pmc) - 1))
 #define MMCR1_PMCSEL_SHIFT(pmc)		(24 - (((pmc) - 1)) * 8)
+#define MMCR1_FAB_SHIFT			36
 #define MMCR1_DC_QUAL_SHIFT		47
 #define MMCR1_IC_QUAL_SHIFT		46
 
@@ -388,8 +389,8 @@ static int power8_compute_mmcr(u64 event[], int n_ev,
 		 * the threshold bits are used for the match value.
 		 */
 		if (event_is_fab_match(event[i])) {
-			mmcr1 |= (event[i] >> EVENT_THR_CTL_SHIFT) &
-				  EVENT_THR_CTL_MASK;
+			mmcr1 |= ((event[i] >> EVENT_THR_CTL_SHIFT) &
+				  EVENT_THR_CTL_MASK) << MMCR1_FAB_SHIFT;
 		} else {
 			val = (event[i] >> EVENT_THR_CTL_SHIFT) & EVENT_THR_CTL_MASK;
 			mmcra |= val << MMCRA_THR_CTL_SHIFT;
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 4cfa499..534574a 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -16,7 +16,6 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/of_gpio.h>
-#include <linux/of_i2c.h>
 #include <linux/slab.h>
 #include <linux/export.h>
 
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
index b89ef65..b69221b 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
@@ -373,8 +373,9 @@ static int mpc52xx_irqhost_map(struct irq_domain *h, unsigned int virq,
 	case MPC52xx_IRQ_L1_PERP: irqchip = &mpc52xx_periph_irqchip; break;
 	case MPC52xx_IRQ_L1_SDMA: irqchip = &mpc52xx_sdma_irqchip; break;
 	case MPC52xx_IRQ_L1_CRIT:
+	default:
 		pr_warn("%s: Critical IRQ #%d is unsupported! Nopping it.\n",
-			__func__, l2irq);
+			__func__, l1irq);
 		irq_set_chip(virq, &no_irq_chip);
 		return 0;
 	}
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index efdd37c..de2eb93 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -32,6 +32,12 @@ config BSC9131_RDB
 	  StarCore SC3850 DSP
 	  Manufacturer : Freescale Semiconductor, Inc
 
+config C293_PCIE
+	  bool "Freescale C293PCIE"
+	  select DEFAULT_UIMAGE
+	  help
+	  This option enables support for the C293PCIE board
+
 config MPC8540_ADS
 	bool "Freescale MPC8540 ADS"
 	select DEFAULT_UIMAGE
@@ -112,10 +118,10 @@ config P1022_RDK
 	  reference board.
 
 config P1023_RDS
-	bool "Freescale P1023 RDS"
+	bool "Freescale P1023 RDS/RDB"
 	select DEFAULT_UIMAGE
 	help
-	  This option enables support for the P1023 RDS board
+	  This option enables support for the P1023 RDS and RDB boards
 
 config SOCRATES
 	bool "Socrates"
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 2eab37e..53c9f75 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_SMP) += smp.o
 obj-y += common.o
 
 obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
+obj-$(CONFIG_C293_PCIE)   += c293pcie.o
 obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
diff --git a/arch/powerpc/platforms/85xx/c293pcie.c b/arch/powerpc/platforms/85xx/c293pcie.c
new file mode 100644
index 0000000..6208e49
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/c293pcie.c
@@ -0,0 +1,75 @@
+/*
+ * C293PCIE Board Setup
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include "mpc85xx.h"
+
+void __init c293_pcie_pic_init(void)
+{
+	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
+	  MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC  ");
+
+	BUG_ON(mpic == NULL);
+
+	mpic_init(mpic);
+}
+
+
+/*
+ * Setup the architecture
+ */
+static void __init c293_pcie_setup_arch(void)
+{
+	if (ppc_md.progress)
+		ppc_md.progress("c293_pcie_setup_arch()", 0);
+
+	fsl_pci_assign_primary();
+
+	printk(KERN_INFO "C293 PCIE board from Freescale Semiconductor\n");
+}
+
+machine_arch_initcall(c293_pcie, mpc85xx_common_publish_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init c293_pcie_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (of_flat_dt_is_compatible(root, "fsl,C293PCIE"))
+		return 1;
+	return 0;
+}
+
+define_machine(c293_pcie) {
+	.name			= "C293 PCIE",
+	.probe			= c293_pcie_probe,
+	.setup_arch		= c293_pcie_setup_arch,
+	.init_IRQ		= c293_pcie_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/corenet_ds.c b/arch/powerpc/platforms/85xx/corenet_ds.c
index c59c617..aa3690b 100644
--- a/arch/powerpc/platforms/85xx/corenet_ds.c
+++ b/arch/powerpc/platforms/85xx/corenet_ds.c
@@ -53,12 +53,6 @@ void __init corenet_ds_setup_arch(void)
 {
 	mpc85xx_smp_init();
 
-#if defined(CONFIG_PCI) && defined(CONFIG_PPC64)
-	pci_devs_phb_init();
-#endif
-
-	fsl_pci_assign_primary();
-
 	swiotlb_detect_4g();
 
 	pr_info("%s board from Freescale Semiconductor\n", ppc_md.name);
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index ede8771..53b6fb0 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -160,6 +160,7 @@ machine_arch_initcall(p2020_rdb_pc, mpc85xx_common_publish_devices);
 machine_arch_initcall(p1020_mbg_pc, mpc85xx_common_publish_devices);
 machine_arch_initcall(p1020_rdb, mpc85xx_common_publish_devices);
 machine_arch_initcall(p1020_rdb_pc, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1020_rdb_pd, mpc85xx_common_publish_devices);
 machine_arch_initcall(p1020_utm_pc, mpc85xx_common_publish_devices);
 machine_arch_initcall(p1021_rdb_pc, mpc85xx_common_publish_devices);
 machine_arch_initcall(p1025_rdb, mpc85xx_common_publish_devices);
@@ -193,6 +194,13 @@ static int __init p1020_rdb_pc_probe(void)
 	return of_flat_dt_is_compatible(root, "fsl,P1020RDB-PC");
 }
 
+static int __init p1020_rdb_pd_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,P1020RDB-PD");
+}
+
 static int __init p1021_rdb_pc_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
@@ -351,6 +359,20 @@ define_machine(p1020_rdb_pc) {
 	.progress		= udbg_progress,
 };
 
+define_machine(p1020_rdb_pd) {
+	.name			= "P1020RDB-PD",
+	.probe			= p1020_rdb_pd_probe,
+	.setup_arch		= mpc85xx_rdb_setup_arch,
+	.init_IRQ		= mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
+
 define_machine(p1024_rdb) {
 	.name			= "P1024 RDB",
 	.probe			= p1024_rdb_probe,
diff --git a/arch/powerpc/platforms/85xx/p1023_rds.c b/arch/powerpc/platforms/85xx/p1023_rds.c
index 9cc60a7..2ae9d49 100644
--- a/arch/powerpc/platforms/85xx/p1023_rds.c
+++ b/arch/powerpc/platforms/85xx/p1023_rds.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright 2010-2011, 2013 Freescale Semiconductor, Inc.
  *
  * Author: Roy Zang <tie-fei.zang@freescale.com>
  *
@@ -86,6 +86,7 @@ static void __init mpc85xx_rds_setup_arch(void)
 }
 
 machine_arch_initcall(p1023_rds, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1023_rdb, mpc85xx_common_publish_devices);
 
 static void __init mpc85xx_rds_pic_init(void)
 {
@@ -106,6 +107,14 @@ static int __init p1023_rds_probe(void)
 
 }
 
+static int __init p1023_rdb_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,P1023RDB");
+
+}
+
 define_machine(p1023_rds) {
 	.name			= "P1023 RDS",
 	.probe			= p1023_rds_probe,
@@ -120,3 +129,16 @@ define_machine(p1023_rds) {
 #endif
 };
 
+define_machine(p1023_rdb) {
+	.name			= "P1023 RDB",
+	.probe			= p1023_rdb_probe,
+	.setup_arch		= mpc85xx_rds_setup_arch,
+	.init_IRQ		= mpc85xx_rds_pic_init,
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+};
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 5ced4f5..281b7f0 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -69,7 +69,32 @@ static void mpc85xx_give_timebase(void)
 	tb_req = 0;
 
 	mpc85xx_timebase_freeze(1);
+#ifdef CONFIG_PPC64
+	/*
+	 * e5500/e6500 have a workaround for erratum A-006958 in place
+	 * that will reread the timebase until TBL is non-zero.
+	 * That would be a bad thing when the timebase is frozen.
+	 *
+	 * Thus, we read it manually, and instead of checking that
+	 * TBL is non-zero, we ensure that TB does not change.  We don't
+	 * do that for the main mftb implementation, because it requires
+	 * a scratch register
+	 */
+	{
+		u64 prev;
+
+		asm volatile("mfspr %0, %1" : "=r" (timebase) :
+			     "i" (SPRN_TBRL));
+
+		do {
+			prev = timebase;
+			asm volatile("mfspr %0, %1" : "=r" (timebase) :
+				     "i" (SPRN_TBRL));
+		} while (prev != timebase);
+	}
+#else
 	timebase = get_tb();
+#endif
 	mb();
 	tb_valid = 1;
 
@@ -255,6 +280,7 @@ out:
 
 struct smp_ops_t smp_85xx_ops = {
 	.kick_cpu = smp_85xx_kick_cpu,
+	.cpu_bootable = smp_generic_cpu_bootable,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_disable	= generic_cpu_disable,
 	.cpu_die	= generic_cpu_die,
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index d703775..bf9c6d4 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -202,17 +202,12 @@ config PPC_P7_NAP
 	bool
 	default n
 
-config PPC_INDIRECT_IO
-	bool
-	select GENERIC_IOMAP
-
 config PPC_INDIRECT_PIO
 	bool
-	select PPC_INDIRECT_IO
+	select GENERIC_IOMAP
 
 config PPC_INDIRECT_MMIO
 	bool
-	select PPC_INDIRECT_IO
 
 config PPC_IO_WORKAROUNDS
 	bool
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 47d9a03..6704e2e 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -96,18 +96,31 @@ config GENERIC_CPU
 
 config CELL_CPU
 	bool "Cell Broadband Engine"
+	depends on PPC_BOOK3S_64
 
 config POWER4_CPU
 	bool "POWER4"
+	depends on PPC_BOOK3S_64
 
 config POWER5_CPU
 	bool "POWER5"
+	depends on PPC_BOOK3S_64
 
 config POWER6_CPU
 	bool "POWER6"
+	depends on PPC_BOOK3S_64
 
 config POWER7_CPU
 	bool "POWER7"
+	depends on PPC_BOOK3S_64
+
+config E5500_CPU
+	bool "Freescale e5500"
+	depends on E500
+
+config E6500_CPU
+	bool "Freescale e6500"
+	depends on E500
 
 endchoice
 
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 946306b..b535606 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -697,7 +697,7 @@ static int __init cell_iommu_get_window(struct device_node *np,
 					 unsigned long *base,
 					 unsigned long *size)
 {
-	const void *dma_window;
+	const __be32 *dma_window;
 	unsigned long index;
 
 	/* Use ibm,dma-window if available, else, hard code ! */
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index f75f6fc..90745ea 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -136,25 +136,12 @@ static int smp_cell_kick_cpu(int nr)
 	return 0;
 }
 
-static int smp_cell_cpu_bootable(unsigned int nr)
-{
-	/* Special case - we inhibit secondary thread startup
-	 * during boot if the user requests it.  Odd-numbered
-	 * cpus are assumed to be secondary threads.
-	 */
-	if (system_state == SYSTEM_BOOTING &&
-	    cpu_has_feature(CPU_FTR_SMT) &&
-	    !smt_enabled_at_boot && cpu_thread_in_core(nr) != 0)
-		return 0;
-
-	return 1;
-}
 static struct smp_ops_t bpa_iic_smp_ops = {
 	.message_pass	= iic_message_pass,
 	.probe		= smp_iic_probe,
 	.kick_cpu	= smp_cell_kick_cpu,
 	.setup_cpu	= smp_cell_setup_cpu,
-	.cpu_bootable	= smp_cell_cpu_bootable,
+	.cpu_bootable	= smp_generic_cpu_bootable,
 };
 
 /* This is called very early */
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index f390042..87ba7cf 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -620,12 +620,16 @@ spufs_parse_options(struct super_block *sb, char *options, struct inode *root)
 		case Opt_uid:
 			if (match_int(&args[0], &option))
 				return 0;
-			root->i_uid = option;
+			root->i_uid = make_kuid(current_user_ns(), option);
+			if (!uid_valid(root->i_uid))
+				return 0;
 			break;
 		case Opt_gid:
 			if (match_int(&args[0], &option))
 				return 0;
-			root->i_gid = option;
+			root->i_gid = make_kgid(current_user_ns(), option);
+			if (!gid_valid(root->i_gid))
+				return 0;
 			break;
 		case Opt_mode:
 			if (match_octal(&args[0], &option))
diff --git a/arch/powerpc/platforms/powernv/Kconfig b/arch/powerpc/platforms/powernv/Kconfig
index c24684c..6fae5eb 100644
--- a/arch/powerpc/platforms/powernv/Kconfig
+++ b/arch/powerpc/platforms/powernv/Kconfig
@@ -7,6 +7,8 @@ config PPC_POWERNV
 	select PPC_P7_NAP
 	select PPC_PCI_CHOICE if EMBEDDED
 	select EPAPR_BOOT
+	select PPC_INDIRECT_PIO
+	select PPC_UDBG_16550
 	default y
 
 config POWERNV_MSI
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index 7fe5951..300c437d 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -1,5 +1,5 @@
 obj-y			+= setup.o opal-takeover.o opal-wrappers.o opal.o
-obj-y			+= opal-rtc.o opal-nvram.o
+obj-y			+= opal-rtc.o opal-nvram.o opal-lpc.o
 
 obj-$(CONFIG_SMP)	+= smp.o
 obj-$(CONFIG_PCI)	+= pci.o pci-p5ioc2.o pci-ioda.o
diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c
index 0cd1c4a..cf42e74 100644
--- a/arch/powerpc/platforms/powernv/eeh-ioda.c
+++ b/arch/powerpc/platforms/powernv/eeh-ioda.c
@@ -36,13 +36,6 @@
 #include "powernv.h"
 #include "pci.h"
 
-/* Debugging option */
-#ifdef IODA_EEH_DBG_ON
-#define IODA_EEH_DBG(args...)	pr_info(args)
-#else
-#define IODA_EEH_DBG(args...)
-#endif
-
 static char *hub_diag = NULL;
 static int ioda_eeh_nb_init = 0;
 
@@ -823,17 +816,17 @@ static int ioda_eeh_next_error(struct eeh_pe **pe)
 
 		/* If OPAL API returns error, we needn't proceed */
 		if (rc != OPAL_SUCCESS) {
-			IODA_EEH_DBG("%s: Invalid return value on "
-				     "PHB#%x (0x%lx) from opal_pci_next_error",
-				     __func__, hose->global_number, rc);
+			pr_devel("%s: Invalid return value on "
+				 "PHB#%x (0x%lx) from opal_pci_next_error",
+				 __func__, hose->global_number, rc);
 			continue;
 		}
 
 		/* If the PHB doesn't have error, stop processing */
 		if (err_type == OPAL_EEH_NO_ERROR ||
 		    severity == OPAL_EEH_SEV_NO_ERROR) {
-			IODA_EEH_DBG("%s: No error found on PHB#%x\n",
-				     __func__, hose->global_number);
+			pr_devel("%s: No error found on PHB#%x\n",
+				 __func__, hose->global_number);
 			continue;
 		}
 
@@ -842,8 +835,9 @@ static int ioda_eeh_next_error(struct eeh_pe **pe)
 		 * highest priority reported upon multiple errors on the
 		 * specific PHB.
 		 */
-		IODA_EEH_DBG("%s: Error (%d, %d, %d) on PHB#%x\n",
-			err_type, severity, pe_no, hose->global_number);
+		pr_devel("%s: Error (%d, %d, %llu) on PHB#%x\n",
+			 __func__, err_type, severity,
+			 frozen_pe_no, hose->global_number);
 		switch (err_type) {
 		case OPAL_EEH_IOC_ERROR:
 			if (severity == OPAL_EEH_SEV_IOC_DEAD) {
diff --git a/arch/powerpc/platforms/powernv/opal-lpc.c b/arch/powerpc/platforms/powernv/opal-lpc.c
new file mode 100644
index 0000000..a7614bb
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/opal-lpc.c
@@ -0,0 +1,203 @@
+/*
+ * PowerNV LPC bus handling.
+ *
+ * Copyright 2013 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/bug.h>
+
+#include <asm/machdep.h>
+#include <asm/firmware.h>
+#include <asm/xics.h>
+#include <asm/opal.h>
+
+static int opal_lpc_chip_id = -1;
+
+static u8 opal_lpc_inb(unsigned long port)
+{
+	int64_t rc;
+	uint32_t data;
+
+	if (opal_lpc_chip_id < 0 || port > 0xffff)
+		return 0xff;
+	rc = opal_lpc_read(opal_lpc_chip_id, OPAL_LPC_IO, port, &data, 1);
+	return rc ? 0xff : data;
+}
+
+static __le16 __opal_lpc_inw(unsigned long port)
+{
+	int64_t rc;
+	uint32_t data;
+
+	if (opal_lpc_chip_id < 0 || port > 0xfffe)
+		return 0xffff;
+	if (port & 1)
+		return (__le16)opal_lpc_inb(port) << 8 | opal_lpc_inb(port + 1);
+	rc = opal_lpc_read(opal_lpc_chip_id, OPAL_LPC_IO, port, &data, 2);
+	return rc ? 0xffff : data;
+}
+static u16 opal_lpc_inw(unsigned long port)
+{
+	return le16_to_cpu(__opal_lpc_inw(port));
+}
+
+static __le32 __opal_lpc_inl(unsigned long port)
+{
+	int64_t rc;
+	uint32_t data;
+
+	if (opal_lpc_chip_id < 0 || port > 0xfffc)
+		return 0xffffffff;
+	if (port & 3)
+		return (__le32)opal_lpc_inb(port    ) << 24 |
+		       (__le32)opal_lpc_inb(port + 1) << 16 |
+		       (__le32)opal_lpc_inb(port + 2) <<  8 |
+			       opal_lpc_inb(port + 3);
+	rc = opal_lpc_read(opal_lpc_chip_id, OPAL_LPC_IO, port, &data, 4);
+	return rc ? 0xffffffff : data;
+}
+
+static u32 opal_lpc_inl(unsigned long port)
+{
+	return le32_to_cpu(__opal_lpc_inl(port));
+}
+
+static void opal_lpc_outb(u8 val, unsigned long port)
+{
+	if (opal_lpc_chip_id < 0 || port > 0xffff)
+		return;
+	opal_lpc_write(opal_lpc_chip_id, OPAL_LPC_IO, port, val, 1);
+}
+
+static void __opal_lpc_outw(__le16 val, unsigned long port)
+{
+	if (opal_lpc_chip_id < 0 || port > 0xfffe)
+		return;
+	if (port & 1) {
+		opal_lpc_outb(val >> 8, port);
+		opal_lpc_outb(val     , port + 1);
+		return;
+	}
+	opal_lpc_write(opal_lpc_chip_id, OPAL_LPC_IO, port, val, 2);
+}
+
+static void opal_lpc_outw(u16 val, unsigned long port)
+{
+	__opal_lpc_outw(cpu_to_le16(val), port);
+}
+
+static void __opal_lpc_outl(__le32 val, unsigned long port)
+{
+	if (opal_lpc_chip_id < 0 || port > 0xfffc)
+		return;
+	if (port & 3) {
+		opal_lpc_outb(val >> 24, port);
+		opal_lpc_outb(val >> 16, port + 1);
+		opal_lpc_outb(val >>  8, port + 2);
+		opal_lpc_outb(val      , port + 3);
+		return;
+	}
+	opal_lpc_write(opal_lpc_chip_id, OPAL_LPC_IO, port, val, 4);
+}
+
+static void opal_lpc_outl(u32 val, unsigned long port)
+{
+	__opal_lpc_outl(cpu_to_le32(val), port);
+}
+
+static void opal_lpc_insb(unsigned long p, void *b, unsigned long c)
+{
+	u8 *ptr = b;
+
+	while(c--)
+		*(ptr++) = opal_lpc_inb(p);
+}
+
+static void opal_lpc_insw(unsigned long p, void *b, unsigned long c)
+{
+	__le16 *ptr = b;
+
+	while(c--)
+		*(ptr++) = __opal_lpc_inw(p);
+}
+
+static void opal_lpc_insl(unsigned long p, void *b, unsigned long c)
+{
+	__le32 *ptr = b;
+
+	while(c--)
+		*(ptr++) = __opal_lpc_inl(p);
+}
+
+static void opal_lpc_outsb(unsigned long p, const void *b, unsigned long c)
+{
+	const u8 *ptr = b;
+
+	while(c--)
+		opal_lpc_outb(*(ptr++), p);
+}
+
+static void opal_lpc_outsw(unsigned long p, const void *b, unsigned long c)
+{
+	const __le16 *ptr = b;
+
+	while(c--)
+		__opal_lpc_outw(*(ptr++), p);
+}
+
+static void opal_lpc_outsl(unsigned long p, const void *b, unsigned long c)
+{
+	const __le32 *ptr = b;
+
+	while(c--)
+		__opal_lpc_outl(*(ptr++), p);
+}
+
+static const struct ppc_pci_io opal_lpc_io = {
+	.inb	= opal_lpc_inb,
+	.inw	= opal_lpc_inw,
+	.inl	= opal_lpc_inl,
+	.outb	= opal_lpc_outb,
+	.outw	= opal_lpc_outw,
+	.outl	= opal_lpc_outl,
+	.insb	= opal_lpc_insb,
+	.insw	= opal_lpc_insw,
+	.insl	= opal_lpc_insl,
+	.outsb	= opal_lpc_outsb,
+	.outsw	= opal_lpc_outsw,
+	.outsl	= opal_lpc_outsl,
+};
+
+void opal_lpc_init(void)
+{
+	struct device_node *np;
+
+	/*
+	 * Look for a Power8 LPC bus tagged as "primary",
+	 * we currently support only one though the OPAL APIs
+	 * support any number.
+	 */
+	for_each_compatible_node(np, NULL, "ibm,power8-lpc") {
+		if (!of_device_is_available(np))
+			continue;
+		if (!of_get_property(np, "primary", NULL))
+			continue;
+		opal_lpc_chip_id = of_get_ibm_chip_id(np);
+		break;
+	}
+	if (opal_lpc_chip_id < 0)
+		return;
+
+	/* Setup special IO ops */
+	ppc_pci_io = opal_lpc_io;
+	isa_io_special = true;
+
+	pr_info("OPAL: Power8 LPC bus found, chip ID %d\n", opal_lpc_chip_id);
+}
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index e88863f..8f38445 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -111,3 +111,8 @@ OPAL_CALL(opal_pci_next_error,			OPAL_PCI_NEXT_ERROR);
 OPAL_CALL(opal_pci_poll,			OPAL_PCI_POLL);
 OPAL_CALL(opal_pci_msi_eoi,			OPAL_PCI_MSI_EOI);
 OPAL_CALL(opal_pci_get_phb_diag_data2,		OPAL_PCI_GET_PHB_DIAG_DATA2);
+OPAL_CALL(opal_xscom_read,			OPAL_XSCOM_READ);
+OPAL_CALL(opal_xscom_write,			OPAL_XSCOM_WRITE);
+OPAL_CALL(opal_lpc_read,			OPAL_LPC_READ);
+OPAL_CALL(opal_lpc_write,			OPAL_LPC_WRITE);
+OPAL_CALL(opal_return_cpu,			OPAL_RETURN_CPU);
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index 106301f..2911abe 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -380,18 +380,20 @@ static int __init opal_init(void)
 		pr_warn("opal: Node not found\n");
 		return -ENODEV;
 	}
+
+	/* Register OPAL consoles if any ports */
 	if (firmware_has_feature(FW_FEATURE_OPALv2))
 		consoles = of_find_node_by_path("/ibm,opal/consoles");
 	else
 		consoles = of_node_get(opal_node);
-
-	/* Register serial ports */
-	for_each_child_of_node(consoles, np) {
-		if (strcmp(np->name, "serial"))
-			continue;
-		of_platform_device_create(np, NULL, NULL);
+	if (consoles) {
+		for_each_child_of_node(consoles, np) {
+			if (strcmp(np->name, "serial"))
+				continue;
+			of_platform_device_create(np, NULL, NULL);
+		}
+		of_node_put(consoles);
 	}
-	of_node_put(consoles);
 
 	/* Find all OPAL interrupts and request them */
 	irqs = of_get_property(opal_node, "opal-interrupts", &irqlen);
@@ -422,7 +424,7 @@ void opal_shutdown(void)
 
 	for (i = 0; i < opal_irq_count; i++) {
 		if (opal_irqs[i])
-			free_irq(opal_irqs[i], 0);
+			free_irq(opal_irqs[i], NULL);
 		opal_irqs[i] = 0;
 	}
 }
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index d8140b1..74a5a57 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1104,16 +1104,16 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
 				  u64 hub_id, int ioda_type)
 {
 	struct pci_controller *hose;
-	static int primary = 1;
 	struct pnv_phb *phb;
 	unsigned long size, m32map_off, iomap_off, pemap_off;
 	const u64 *prop64;
 	const u32 *prop32;
+	int len;
 	u64 phb_id;
 	void *aux;
 	long rc;
 
-	pr_info(" Initializing IODA%d OPAL PHB %s\n", ioda_type, np->full_name);
+	pr_info("Initializing IODA%d OPAL PHB %s\n", ioda_type, np->full_name);
 
 	prop64 = of_get_property(np, "ibm,opal-phbid", NULL);
 	if (!prop64) {
@@ -1124,20 +1124,31 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	pr_debug("  PHB-ID  : 0x%016llx\n", phb_id);
 
 	phb = alloc_bootmem(sizeof(struct pnv_phb));
-	if (phb) {
-		memset(phb, 0, sizeof(struct pnv_phb));
-		phb->hose = hose = pcibios_alloc_controller(np);
+	if (!phb) {
+		pr_err("  Out of memory !\n");
+		return;
 	}
-	if (!phb || !phb->hose) {
-		pr_err("PCI: Failed to allocate PCI controller for %s\n",
+
+	/* Allocate PCI controller */
+	memset(phb, 0, sizeof(struct pnv_phb));
+	phb->hose = hose = pcibios_alloc_controller(np);
+	if (!phb->hose) {
+		pr_err("  Can't allocate PCI controller for %s\n",
 		       np->full_name);
+		free_bootmem((unsigned long)phb, sizeof(struct pnv_phb));
 		return;
 	}
 
 	spin_lock_init(&phb->lock);
-	/* XXX Use device-tree */
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
+	prop32 = of_get_property(np, "bus-range", &len);
+	if (prop32 && len == 8) {
+		hose->first_busno = prop32[0];
+		hose->last_busno = prop32[1];
+	} else {
+		pr_warn("  Broken <bus-range> on %s\n", np->full_name);
+		hose->first_busno = 0;
+		hose->last_busno = 0xff;
+	}
 	hose->private_data = phb;
 	phb->hub_id = hub_id;
 	phb->opal_id = phb_id;
@@ -1152,8 +1163,7 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
 		phb->model = PNV_PHB_MODEL_UNKNOWN;
 
 	/* Parse 32-bit and IO ranges (if any) */
-	pci_process_bridge_OF_ranges(phb->hose, np, primary);
-	primary = 0;
+	pci_process_bridge_OF_ranges(hose, np, !hose->global_number);
 
 	/* Get registers */
 	phb->regs = of_iomap(np, 0);
@@ -1177,22 +1187,23 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	phb->ioda.io_segsize = phb->ioda.io_size / phb->ioda.total_pe;
 	phb->ioda.io_pci_base = 0; /* XXX calculate this ? */
 
-	/* Allocate aux data & arrays
-	 *
-	 * XXX TODO: Don't allocate io segmap on PHB3
-	 */
+	/* Allocate aux data & arrays. We don't have IO ports on PHB3 */
 	size = _ALIGN_UP(phb->ioda.total_pe / 8, sizeof(unsigned long));
 	m32map_off = size;
 	size += phb->ioda.total_pe * sizeof(phb->ioda.m32_segmap[0]);
 	iomap_off = size;
-	size += phb->ioda.total_pe * sizeof(phb->ioda.io_segmap[0]);
+	if (phb->type == PNV_PHB_IODA1) {
+		iomap_off = size;
+		size += phb->ioda.total_pe * sizeof(phb->ioda.io_segmap[0]);
+	}
 	pemap_off = size;
 	size += phb->ioda.total_pe * sizeof(struct pnv_ioda_pe);
 	aux = alloc_bootmem(size);
 	memset(aux, 0, size);
 	phb->ioda.pe_alloc = aux;
 	phb->ioda.m32_segmap = aux + m32map_off;
-	phb->ioda.io_segmap = aux + iomap_off;
+	if (phb->type == PNV_PHB_IODA1)
+		phb->ioda.io_segmap = aux + iomap_off;
 	phb->ioda.pe_array = aux + pemap_off;
 	set_bit(0, phb->ioda.pe_alloc);
 
diff --git a/arch/powerpc/platforms/powernv/powernv.h b/arch/powerpc/platforms/powernv/powernv.h
index a1c6f83..de6819b 100644
--- a/arch/powerpc/platforms/powernv/powernv.h
+++ b/arch/powerpc/platforms/powernv/powernv.h
@@ -15,4 +15,6 @@ static inline void pnv_pci_init(void) { }
 static inline void pnv_pci_shutdown(void) { }
 #endif
 
+extern void pnv_lpc_init(void);
+
 #endif /* _POWERNV_H */
diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
index 84438af..e239dcf 100644
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -31,6 +31,7 @@
 #include <asm/xics.h>
 #include <asm/rtas.h>
 #include <asm/opal.h>
+#include <asm/kexec.h>
 
 #include "powernv.h"
 
@@ -54,6 +55,12 @@ static void __init pnv_setup_arch(void)
 
 static void __init pnv_init_early(void)
 {
+	/*
+	 * Initialize the LPC bus now so that legacy serial
+	 * ports can be found on it
+	 */
+	opal_lpc_init();
+
 #ifdef CONFIG_HVC_OPAL
 	if (firmware_has_feature(FW_FEATURE_OPAL))
 		hvc_opal_init_early();
@@ -147,6 +154,16 @@ static void pnv_shutdown(void)
 static void pnv_kexec_cpu_down(int crash_shutdown, int secondary)
 {
 	xics_kexec_teardown_cpu(secondary);
+
+	/* Return secondary CPUs to firmware on OPAL v3 */
+	if (firmware_has_feature(FW_FEATURE_OPALv3) && secondary) {
+		mb();
+		get_paca()->kexec_state = KEXEC_STATE_REAL_MODE;
+		mb();
+
+		/* Return the CPU to OPAL */
+		opal_return_cpu();
+	}
 }
 #endif /* CONFIG_KEXEC */
 
diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c
index 89e3857..908672b 100644
--- a/arch/powerpc/platforms/powernv/smp.c
+++ b/arch/powerpc/platforms/powernv/smp.c
@@ -46,22 +46,6 @@ static void pnv_smp_setup_cpu(int cpu)
 		xics_setup_cpu();
 }
 
-static int pnv_smp_cpu_bootable(unsigned int nr)
-{
-	/* Special case - we inhibit secondary thread startup
-	 * during boot if the user requests it.
-	 */
-	if (system_state == SYSTEM_BOOTING && cpu_has_feature(CPU_FTR_SMT)) {
-		if (!smt_enabled_at_boot && cpu_thread_in_core(nr) != 0)
-			return 0;
-		if (smt_enabled_at_boot
-		    && cpu_thread_in_core(nr) >= smt_enabled_at_boot)
-			return 0;
-	}
-
-	return 1;
-}
-
 int pnv_smp_kick_cpu(int nr)
 {
 	unsigned int pcpu = get_hard_smp_processor_id(nr);
@@ -195,7 +179,7 @@ static struct smp_ops_t pnv_smp_ops = {
 	.probe		= xics_smp_probe,
 	.kick_cpu	= pnv_smp_kick_cpu,
 	.setup_cpu	= pnv_smp_setup_cpu,
-	.cpu_bootable	= pnv_smp_cpu_bootable,
+	.cpu_bootable	= smp_generic_cpu_bootable,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_disable	= pnv_smp_cpu_disable,
 	.cpu_die	= generic_cpu_die,
diff --git a/arch/powerpc/platforms/ps3/time.c b/arch/powerpc/platforms/ps3/time.c
index cba1e6b..ce73ce8 100644
--- a/arch/powerpc/platforms/ps3/time.c
+++ b/arch/powerpc/platforms/ps3/time.c
@@ -90,7 +90,7 @@ static int __init ps3_rtc_init(void)
 
 	pdev = platform_device_register_simple("rtc-ps3", -1, NULL, 0);
 
-	return PTR_RET(pdev);
+	return PTR_ERR_OR_ZERO(pdev);
 }
 
 module_init(ps3_rtc_init);
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 8ae0103..6c61ec5 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_CMM)		+= cmm.o
 obj-$(CONFIG_DTL)		+= dtl.o
 obj-$(CONFIG_IO_EVENT_IRQ)	+= io_event_irq.o
 obj-$(CONFIG_PSERIES_IDLE)	+= processor_idle.o
+obj-$(CONFIG_LPARCFG)		+= lparcfg.o
 
 ifeq ($(CONFIG_PPC_PSERIES),y)
 obj-$(CONFIG_SUSPEND)		+= suspend.o
diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c
index c638535..1e561be 100644
--- a/arch/powerpc/platforms/pseries/cmm.c
+++ b/arch/powerpc/platforms/pseries/cmm.c
@@ -40,8 +40,7 @@
 #include <asm/pgalloc.h>
 #include <asm/uaccess.h>
 #include <linux/memory.h>
-
-#include "plpar_wrappers.h"
+#include <asm/plpar_wrappers.h>
 
 #define CMM_DRIVER_VERSION	"1.0.0"
 #define CMM_DEFAULT_DELAY	1
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index a1a7b9a..7cfdaae 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -63,26 +63,32 @@ static struct property *dlpar_parse_cc_property(struct cc_workarea *ccwa)
 	return prop;
 }
 
-static struct device_node *dlpar_parse_cc_node(struct cc_workarea *ccwa)
+static struct device_node *dlpar_parse_cc_node(struct cc_workarea *ccwa,
+					       const char *path)
 {
 	struct device_node *dn;
 	char *name;
 
+	/* If parent node path is "/" advance path to NULL terminator to
+	 * prevent double leading slashs in full_name.
+	 */
+	if (!path[1])
+		path++;
+
 	dn = kzalloc(sizeof(*dn), GFP_KERNEL);
 	if (!dn)
 		return NULL;
 
-	/* The configure connector reported name does not contain a
-	 * preceding '/', so we allocate a buffer large enough to
-	 * prepend this to the full_name.
-	 */
 	name = (char *)ccwa + ccwa->name_offset;
-	dn->full_name = kasprintf(GFP_KERNEL, "/%s", name);
+	dn->full_name = kasprintf(GFP_KERNEL, "%s/%s", path, name);
 	if (!dn->full_name) {
 		kfree(dn);
 		return NULL;
 	}
 
+	of_node_set_flag(dn, OF_DYNAMIC);
+	kref_init(&dn->kref);
+
 	return dn;
 }
 
@@ -120,7 +126,8 @@ void dlpar_free_cc_nodes(struct device_node *dn)
 #define CALL_AGAIN	-2
 #define ERR_CFG_USE     -9003
 
-struct device_node *dlpar_configure_connector(u32 drc_index)
+struct device_node *dlpar_configure_connector(u32 drc_index,
+					      struct device_node *parent)
 {
 	struct device_node *dn;
 	struct device_node *first_dn = NULL;
@@ -129,6 +136,7 @@ struct device_node *dlpar_configure_connector(u32 drc_index)
 	struct property *last_property = NULL;
 	struct cc_workarea *ccwa;
 	char *data_buf;
+	const char *parent_path = parent->full_name;
 	int cc_token;
 	int rc = -1;
 
@@ -162,7 +170,7 @@ struct device_node *dlpar_configure_connector(u32 drc_index)
 			break;
 
 		case NEXT_SIBLING:
-			dn = dlpar_parse_cc_node(ccwa);
+			dn = dlpar_parse_cc_node(ccwa, parent_path);
 			if (!dn)
 				goto cc_error;
 
@@ -172,13 +180,17 @@ struct device_node *dlpar_configure_connector(u32 drc_index)
 			break;
 
 		case NEXT_CHILD:
-			dn = dlpar_parse_cc_node(ccwa);
+			if (first_dn)
+				parent_path = last_dn->full_name;
+
+			dn = dlpar_parse_cc_node(ccwa, parent_path);
 			if (!dn)
 				goto cc_error;
 
-			if (!first_dn)
+			if (!first_dn) {
+				dn->parent = parent;
 				first_dn = dn;
-			else {
+			} else {
 				dn->parent = last_dn;
 				if (last_dn)
 					last_dn->child = dn;
@@ -202,6 +214,7 @@ struct device_node *dlpar_configure_connector(u32 drc_index)
 
 		case PREV_PARENT:
 			last_dn = last_dn->parent;
+			parent_path = last_dn->parent->full_name;
 			break;
 
 		case CALL_AGAIN:
@@ -256,8 +269,6 @@ int dlpar_attach_node(struct device_node *dn)
 {
 	int rc;
 
-	of_node_set_flag(dn, OF_DYNAMIC);
-	kref_init(&dn->kref);
 	dn->parent = derive_parent(dn->full_name);
 	if (!dn->parent)
 		return -ENOMEM;
@@ -275,8 +286,15 @@ int dlpar_attach_node(struct device_node *dn)
 
 int dlpar_detach_node(struct device_node *dn)
 {
+	struct device_node *child;
 	int rc;
 
+	child = of_get_next_child(dn, NULL);
+	while (child) {
+		dlpar_detach_node(child);
+		child = of_get_next_child(dn, child);
+	}
+
 	rc = of_detach_node(dn);
 	if (rc)
 		return rc;
@@ -382,9 +400,8 @@ out:
 
 static ssize_t dlpar_cpu_probe(const char *buf, size_t count)
 {
-	struct device_node *dn;
+	struct device_node *dn, *parent;
 	unsigned long drc_index;
-	char *cpu_name;
 	int rc;
 
 	cpu_hotplug_driver_lock();
@@ -394,25 +411,19 @@ static ssize_t dlpar_cpu_probe(const char *buf, size_t count)
 		goto out;
 	}
 
-	dn = dlpar_configure_connector(drc_index);
-	if (!dn) {
-		rc = -EINVAL;
+	parent = of_find_node_by_path("/cpus");
+	if (!parent) {
+		rc = -ENODEV;
 		goto out;
 	}
 
-	/* configure-connector reports cpus as living in the base
-	 * directory of the device tree.  CPUs actually live in the
-	 * cpus directory so we need to fixup the full_name.
-	 */
-	cpu_name = kasprintf(GFP_KERNEL, "/cpus%s", dn->full_name);
-	if (!cpu_name) {
-		dlpar_free_cc_nodes(dn);
-		rc = -ENOMEM;
+	dn = dlpar_configure_connector(drc_index, parent);
+	if (!dn) {
+		rc = -EINVAL;
 		goto out;
 	}
 
-	kfree(dn->full_name);
-	dn->full_name = cpu_name;
+	of_node_put(parent);
 
 	rc = dlpar_acquire_drc(drc_index);
 	if (rc) {
diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c
index 0cc0ac0..5db66f1 100644
--- a/arch/powerpc/platforms/pseries/dtl.c
+++ b/arch/powerpc/platforms/pseries/dtl.c
@@ -29,8 +29,7 @@
 #include <asm/firmware.h>
 #include <asm/lppaca.h>
 #include <asm/debug.h>
-
-#include "plpar_wrappers.h"
+#include <asm/plpar_wrappers.h>
 
 struct dtl {
 	struct dtl_entry	*buf;
@@ -87,7 +86,7 @@ static void consume_dtle(struct dtl_entry *dtle, u64 index)
 	barrier();
 
 	/* check for hypervisor ring buffer overflow, ignore this entry if so */
-	if (index + N_DISPATCH_LOG < vpa->dtl_idx)
+	if (index + N_DISPATCH_LOG < be64_to_cpu(vpa->dtl_idx))
 		return;
 
 	++wp;
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
index 217ca5c..82789e7 100644
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -30,7 +30,8 @@
 #include <asm/machdep.h>
 #include <asm/vdso_datapage.h>
 #include <asm/xics.h>
-#include "plpar_wrappers.h"
+#include <asm/plpar_wrappers.h>
+
 #include "offline_states.h"
 
 /* This version can't take the spinlock, because it never returns */
@@ -123,7 +124,7 @@ static void pseries_mach_cpu_die(void)
 		cede_latency_hint = 2;
 
 		get_lppaca()->idle = 1;
-		if (!get_lppaca()->shared_proc)
+		if (!lppaca_shared_proc(get_lppaca()))
 			get_lppaca()->donate_dedicated_cpu = 1;
 
 		while (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) {
@@ -137,7 +138,7 @@ static void pseries_mach_cpu_die(void)
 
 		local_irq_disable();
 
-		if (!get_lppaca()->shared_proc)
+		if (!lppaca_shared_proc(get_lppaca()))
 			get_lppaca()->donate_dedicated_cpu = 0;
 		get_lppaca()->idle = 0;
 
diff --git a/arch/powerpc/platforms/pseries/hvconsole.c b/arch/powerpc/platforms/pseries/hvconsole.c
index b344f94..849b29b 100644
--- a/arch/powerpc/platforms/pseries/hvconsole.c
+++ b/arch/powerpc/platforms/pseries/hvconsole.c
@@ -28,7 +28,7 @@
 #include <linux/errno.h>
 #include <asm/hvcall.h>
 #include <asm/hvconsole.h>
-#include "plpar_wrappers.h"
+#include <asm/plpar_wrappers.h>
 
 /**
  * hvc_get_chars - retrieve characters from firmware for denoted vterm adatper
@@ -40,10 +40,16 @@
  */
 int hvc_get_chars(uint32_t vtermno, char *buf, int count)
 {
-	unsigned long got;
+	long ret;
+	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
+	unsigned long *lbuf = (unsigned long *)buf;
+
+	ret = plpar_hcall(H_GET_TERM_CHAR, retbuf, vtermno);
+	lbuf[0] = be64_to_cpu(retbuf[1]);
+	lbuf[1] = be64_to_cpu(retbuf[2]);
 
-	if (plpar_get_term_char(vtermno, &got, buf) == H_SUCCESS)
-		return got;
+	if (ret == H_SUCCESS)
+		return retbuf[0];
 
 	return 0;
 }
@@ -69,8 +75,9 @@ int hvc_put_chars(uint32_t vtermno, const char *buf, int count)
 	if (count > MAX_VIO_PUT_CHARS)
 		count = MAX_VIO_PUT_CHARS;
 
-	ret = plpar_hcall_norets(H_PUT_TERM_CHAR, vtermno, count, lbuf[0],
-				 lbuf[1]);
+	ret = plpar_hcall_norets(H_PUT_TERM_CHAR, vtermno, count,
+				 cpu_to_be64(lbuf[0]),
+				 cpu_to_be64(lbuf[1]));
 	if (ret == H_SUCCESS)
 		return count;
 	if (ret == H_BUSY)
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 23fc1dc..0307901 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -48,8 +48,7 @@
 #include <asm/ppc-pci.h>
 #include <asm/udbg.h>
 #include <asm/mmzone.h>
-
-#include "plpar_wrappers.h"
+#include <asm/plpar_wrappers.h>
 
 
 static void tce_invalidate_pSeries_sw(struct iommu_table *tbl,
@@ -530,7 +529,7 @@ static void iommu_table_setparms(struct pci_controller *phb,
 static void iommu_table_setparms_lpar(struct pci_controller *phb,
 				      struct device_node *dn,
 				      struct iommu_table *tbl,
-				      const void *dma_window)
+				      const __be32 *dma_window)
 {
 	unsigned long offset, size;
 
@@ -630,7 +629,7 @@ static void pci_dma_bus_setup_pSeriesLP(struct pci_bus *bus)
 	struct iommu_table *tbl;
 	struct device_node *dn, *pdn;
 	struct pci_dn *ppci;
-	const void *dma_window = NULL;
+	const __be32 *dma_window = NULL;
 
 	dn = pci_bus_to_OF_node(bus);
 
@@ -1152,7 +1151,7 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
 {
 	struct device_node *pdn, *dn;
 	struct iommu_table *tbl;
-	const void *dma_window = NULL;
+	const __be32 *dma_window = NULL;
 	struct pci_dn *pci;
 
 	pr_debug("pci_dma_dev_setup_pSeriesLP: %s\n", pci_name(dev));
@@ -1201,7 +1200,7 @@ static int dma_set_mask_pSeriesLP(struct device *dev, u64 dma_mask)
 	bool ddw_enabled = false;
 	struct device_node *pdn, *dn;
 	struct pci_dev *pdev;
-	const void *dma_window = NULL;
+	const __be32 *dma_window = NULL;
 	u64 dma_offset;
 
 	if (!dev->dma_mask)
diff --git a/arch/powerpc/platforms/pseries/kexec.c b/arch/powerpc/platforms/pseries/kexec.c
index 7d94bdc..13fa95b3 100644
--- a/arch/powerpc/platforms/pseries/kexec.c
+++ b/arch/powerpc/platforms/pseries/kexec.c
@@ -17,9 +17,9 @@
 #include <asm/mpic.h>
 #include <asm/xics.h>
 #include <asm/smp.h>
+#include <asm/plpar_wrappers.h>
 
 #include "pseries.h"
-#include "plpar_wrappers.h"
 
 static void pseries_kexec_cpu_down(int crash_shutdown, int secondary)
 {
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 8bad880..356bc75 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -41,8 +41,8 @@
 #include <asm/smp.h>
 #include <asm/trace.h>
 #include <asm/firmware.h>
+#include <asm/plpar_wrappers.h>
 
-#include "plpar_wrappers.h"
 #include "pseries.h"
 
 /* Flag bits for H_BULK_REMOVE */
@@ -68,6 +68,12 @@ void vpa_init(int cpu)
 	struct paca_struct *pp;
 	struct dtl_entry *dtl;
 
+	/*
+	 * The spec says it "may be problematic" if CPU x registers the VPA of
+	 * CPU y. We should never do that, but wail if we ever do.
+	 */
+	WARN_ON(cpu != smp_processor_id());
+
 	if (cpu_has_feature(CPU_FTR_ALTIVEC))
 		lppaca_of(cpu).vmxregs_in_use = 1;
 
@@ -106,7 +112,7 @@ void vpa_init(int cpu)
 		lppaca_of(cpu).dtl_idx = 0;
 
 		/* hypervisor reads buffer length from this field */
-		dtl->enqueue_to_dispatch_time = DISPATCH_LOG_BYTES;
+		dtl->enqueue_to_dispatch_time = cpu_to_be32(DISPATCH_LOG_BYTES);
 		ret = register_dtl(hwcpu, __pa(dtl));
 		if (ret)
 			pr_err("WARNING: DTL registration of cpu %d (hw %d) "
@@ -724,7 +730,7 @@ int h_get_mpp(struct hvcall_mpp_data *mpp_data)
 
 	mpp_data->mem_weight = (retbuf[3] >> 7 * 8) & 0xff;
 	mpp_data->unallocated_mem_weight = (retbuf[3] >> 6 * 8) & 0xff;
-	mpp_data->unallocated_entitlement = retbuf[3] & 0xffffffffffff;
+	mpp_data->unallocated_entitlement = retbuf[3] & 0xffffffffffffUL;
 
 	mpp_data->pool_size = retbuf[4];
 	mpp_data->loan_request = retbuf[5];
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/platforms/pseries/lparcfg.c
index e2a0a16..e738007 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/platforms/pseries/lparcfg.c
@@ -171,7 +171,7 @@ static void parse_ppp_data(struct seq_file *m)
 	           ppp_data.active_system_procs);
 
 	/* pool related entries are appropriate for shared configs */
-	if (lppaca_of(0).shared_proc) {
+	if (lppaca_shared_proc(get_lppaca())) {
 		unsigned long pool_idle_time, pool_procs;
 
 		seq_printf(m, "pool=%d\n", ppp_data.pool_num);
@@ -393,8 +393,8 @@ static void pseries_cmo_data(struct seq_file *m)
 		return;
 
 	for_each_possible_cpu(cpu) {
-		cmo_faults += lppaca_of(cpu).cmo_faults;
-		cmo_fault_time += lppaca_of(cpu).cmo_fault_time;
+		cmo_faults += be64_to_cpu(lppaca_of(cpu).cmo_faults);
+		cmo_fault_time += be64_to_cpu(lppaca_of(cpu).cmo_fault_time);
 	}
 
 	seq_printf(m, "cmo_faults=%lu\n", cmo_faults);
@@ -412,8 +412,9 @@ static void splpar_dispatch_data(struct seq_file *m)
 	unsigned long dispatch_dispersions = 0;
 
 	for_each_possible_cpu(cpu) {
-		dispatches += lppaca_of(cpu).yield_count;
-		dispatch_dispersions += lppaca_of(cpu).dispersion_count;
+		dispatches += be32_to_cpu(lppaca_of(cpu).yield_count);
+		dispatch_dispersions +=
+			be32_to_cpu(lppaca_of(cpu).dispersion_count);
 	}
 
 	seq_printf(m, "dispatches=%lu\n", dispatches);
@@ -480,7 +481,8 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
 	seq_printf(m, "partition_potential_processors=%d\n",
 		   partition_potential_processors);
 
-	seq_printf(m, "shared_processor_mode=%d\n", lppaca_of(0).shared_proc);
+	seq_printf(m, "shared_processor_mode=%d\n",
+		   lppaca_shared_proc(get_lppaca()));
 
 	seq_printf(m, "slb_size=%d\n", mmu_slb_size);
 
diff --git a/arch/powerpc/platforms/pseries/mobility.c b/arch/powerpc/platforms/pseries/mobility.c
index 3d01eee..cde4e0a 100644
--- a/arch/powerpc/platforms/pseries/mobility.c
+++ b/arch/powerpc/platforms/pseries/mobility.c
@@ -28,7 +28,7 @@ struct update_props_workarea {
 	u32 state;
 	u64 reserved;
 	u32 nprops;
-};
+} __packed;
 
 #define NODE_ACTION_MASK	0xff000000
 #define NODE_COUNT_MASK		0x00ffffff
@@ -62,6 +62,7 @@ static int delete_dt_node(u32 phandle)
 		return -ENOENT;
 
 	dlpar_detach_node(dn);
+	of_node_put(dn);
 	return 0;
 }
 
@@ -119,7 +120,7 @@ static int update_dt_property(struct device_node *dn, struct property **prop,
 
 	if (!more) {
 		of_update_property(dn, new_prop);
-		new_prop = NULL;
+		*prop = NULL;
 	}
 
 	return 0;
@@ -130,7 +131,7 @@ static int update_dt_node(u32 phandle, s32 scope)
 	struct update_props_workarea *upwa;
 	struct device_node *dn;
 	struct property *prop = NULL;
-	int i, rc;
+	int i, rc, rtas_rc;
 	char *prop_data;
 	char *rtas_buf;
 	int update_properties_token;
@@ -154,25 +155,26 @@ static int update_dt_node(u32 phandle, s32 scope)
 	upwa->phandle = phandle;
 
 	do {
-		rc = mobility_rtas_call(update_properties_token, rtas_buf,
+		rtas_rc = mobility_rtas_call(update_properties_token, rtas_buf,
 					scope);
-		if (rc < 0)
+		if (rtas_rc < 0)
 			break;
 
 		prop_data = rtas_buf + sizeof(*upwa);
 
-		/* The first element of the buffer is the path of the node
-		 * being updated in the form of a 8 byte string length
-		 * followed by the string. Skip past this to get to the
-		 * properties being updated.
+		/* On the first call to ibm,update-properties for a node the
+		 * the first property value descriptor contains an empty
+		 * property name, the property value length encoded as u32,
+		 * and the property value is the node path being updated.
 		 */
-		vd = *prop_data++;
-		prop_data += vd;
+		if (*prop_data == 0) {
+			prop_data++;
+			vd = *(u32 *)prop_data;
+			prop_data += vd + sizeof(vd);
+			upwa->nprops--;
+		}
 
-		/* The path we skipped over is counted as one of the elements
-		 * returned so start counting at one.
-		 */
-		for (i = 1; i < upwa->nprops; i++) {
+		for (i = 0; i < upwa->nprops; i++) {
 			char *prop_name;
 
 			prop_name = prop_data;
@@ -202,7 +204,7 @@ static int update_dt_node(u32 phandle, s32 scope)
 				prop_data += vd;
 			}
 		}
-	} while (rc == 1);
+	} while (rtas_rc == 1);
 
 	of_node_put(dn);
 	kfree(rtas_buf);
@@ -215,17 +217,14 @@ static int add_dt_node(u32 parent_phandle, u32 drc_index)
 	struct device_node *parent_dn;
 	int rc;
 
-	dn = dlpar_configure_connector(drc_index);
-	if (!dn)
+	parent_dn = of_find_node_by_phandle(parent_phandle);
+	if (!parent_dn)
 		return -ENOENT;
 
-	parent_dn = of_find_node_by_phandle(parent_phandle);
-	if (!parent_dn) {
-		dlpar_free_cc_nodes(dn);
+	dn = dlpar_configure_connector(drc_index, parent_dn);
+	if (!dn)
 		return -ENOENT;
-	}
 
-	dn->parent = parent_dn;
 	rc = dlpar_attach_node(dn);
 	if (rc)
 		dlpar_free_cc_nodes(dn);
diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c
index 6a5f2b1..d276cd3 100644
--- a/arch/powerpc/platforms/pseries/nvram.c
+++ b/arch/powerpc/platforms/pseries/nvram.c
@@ -539,36 +539,6 @@ static int zip_oops(size_t text_len)
 }
 
 #ifdef CONFIG_PSTORE
-/* Derived from logfs_uncompress */
-int nvram_decompress(void *in, void *out, size_t inlen, size_t outlen)
-{
-	int err, ret;
-
-	ret = -EIO;
-	err = zlib_inflateInit(&stream);
-	if (err != Z_OK)
-		goto error;
-
-	stream.next_in = in;
-	stream.avail_in = inlen;
-	stream.total_in = 0;
-	stream.next_out = out;
-	stream.avail_out = outlen;
-	stream.total_out = 0;
-
-	err = zlib_inflate(&stream, Z_FINISH);
-	if (err != Z_STREAM_END)
-		goto error;
-
-	err = zlib_inflateEnd(&stream);
-	if (err != Z_OK)
-		goto error;
-
-	ret = stream.total_out;
-error:
-	return ret;
-}
-
 static int nvram_pstore_open(struct pstore_info *psi)
 {
 	/* Reset the iterator to start reading partitions again */
@@ -584,7 +554,7 @@ static int nvram_pstore_open(struct pstore_info *psi)
  * @part:               pstore writes data to registered buffer in parts,
  *                      part number will indicate the same.
  * @count:              Indicates oops count
- * @hsize:              Size of header added by pstore
+ * @compressed:         Flag to indicate the log is compressed
  * @size:               number of bytes written to the registered buffer
  * @psi:                registered pstore_info structure
  *
@@ -595,7 +565,7 @@ static int nvram_pstore_open(struct pstore_info *psi)
 static int nvram_pstore_write(enum pstore_type_id type,
 				enum kmsg_dump_reason reason,
 				u64 *id, unsigned int part, int count,
-				size_t hsize, size_t size,
+				bool compressed, size_t size,
 				struct pstore_info *psi)
 {
 	int rc;
@@ -611,30 +581,11 @@ static int nvram_pstore_write(enum pstore_type_id type,
 	oops_hdr->report_length = (u16) size;
 	oops_hdr->timestamp = get_seconds();
 
-	if (big_oops_buf) {
-		rc = zip_oops(size);
-		/*
-		 * If compression fails copy recent log messages from
-		 * big_oops_buf to oops_data.
-		 */
-		if (rc != 0) {
-			size_t diff = size - oops_data_sz + hsize;
-
-			if (size > oops_data_sz) {
-				memcpy(oops_data, big_oops_buf, hsize);
-				memcpy(oops_data + hsize, big_oops_buf + diff,
-					oops_data_sz - hsize);
-
-				oops_hdr->report_length = (u16) oops_data_sz;
-			} else
-				memcpy(oops_data, big_oops_buf, size);
-		} else
-			err_type = ERR_TYPE_KERNEL_PANIC_GZ;
-	}
+	if (compressed)
+		err_type = ERR_TYPE_KERNEL_PANIC_GZ;
 
 	rc = nvram_write_os_partition(&oops_log_partition, oops_buf,
-		(int) (sizeof(*oops_hdr) + oops_hdr->report_length), err_type,
-		count);
+		(int) (sizeof(*oops_hdr) + size), err_type, count);
 
 	if (rc != 0)
 		return rc;
@@ -650,12 +601,12 @@ static int nvram_pstore_write(enum pstore_type_id type,
  */
 static ssize_t nvram_pstore_read(u64 *id, enum pstore_type_id *type,
 				int *count, struct timespec *time, char **buf,
-				struct pstore_info *psi)
+				bool *compressed, struct pstore_info *psi)
 {
 	struct oops_log_info *oops_hdr;
 	unsigned int err_type, id_no, size = 0;
 	struct nvram_os_partition *part = NULL;
-	char *buff = NULL, *big_buff = NULL;
+	char *buff = NULL;
 	int sig = 0;
 	loff_t p;
 
@@ -719,8 +670,7 @@ static ssize_t nvram_pstore_read(u64 *id, enum pstore_type_id *type,
 		*id = id_no;
 
 	if (nvram_type_ids[read_type] == PSTORE_TYPE_DMESG) {
-		int length, unzipped_len;
-		size_t hdr_size;
+		size_t length, hdr_size;
 
 		oops_hdr = (struct oops_log_info *)buff;
 		if (oops_hdr->version < OOPS_HDR_VERSION) {
@@ -741,23 +691,10 @@ static ssize_t nvram_pstore_read(u64 *id, enum pstore_type_id *type,
 		memcpy(*buf, buff + hdr_size, length);
 		kfree(buff);
 
-		if (err_type == ERR_TYPE_KERNEL_PANIC_GZ) {
-			big_buff = kmalloc(big_oops_buf_sz, GFP_KERNEL);
-			if (!big_buff)
-				return -ENOMEM;
-
-			unzipped_len = nvram_decompress(*buf, big_buff,
-						length, big_oops_buf_sz);
-
-			if (unzipped_len < 0) {
-				pr_err("nvram: decompression failed, returned "
-					"rc %d\n", unzipped_len);
-				kfree(big_buff);
-			} else {
-				*buf = big_buff;
-				length = unzipped_len;
-			}
-		}
+		if (err_type == ERR_TYPE_KERNEL_PANIC_GZ)
+			*compressed = true;
+		else
+			*compressed = false;
 		return length;
 	}
 
@@ -777,13 +714,8 @@ static int nvram_pstore_init(void)
 {
 	int rc = 0;
 
-	if (big_oops_buf) {
-		nvram_pstore_info.buf = big_oops_buf;
-		nvram_pstore_info.bufsize = big_oops_buf_sz;
-	} else {
-		nvram_pstore_info.buf = oops_data;
-		nvram_pstore_info.bufsize = oops_data_sz;
-	}
+	nvram_pstore_info.buf = oops_data;
+	nvram_pstore_info.bufsize = oops_data_sz;
 
 	rc = pstore_register(&nvram_pstore_info);
 	if (rc != 0)
@@ -802,7 +734,6 @@ static int nvram_pstore_init(void)
 static void __init nvram_init_oops_partition(int rtas_partition_exists)
 {
 	int rc;
-	size_t size;
 
 	rc = pseries_nvram_init_os_partition(&oops_log_partition);
 	if (rc != 0) {
@@ -823,6 +754,11 @@ static void __init nvram_init_oops_partition(int rtas_partition_exists)
 	oops_data = oops_buf + sizeof(struct oops_log_info);
 	oops_data_sz = oops_log_partition.size - sizeof(struct oops_log_info);
 
+	rc = nvram_pstore_init();
+
+	if (!rc)
+		return;
+
 	/*
 	 * Figure compression (preceded by elimination of each line's <n>
 	 * severity prefix) will reduce the oops/panic report to at most
@@ -831,9 +767,8 @@ static void __init nvram_init_oops_partition(int rtas_partition_exists)
 	big_oops_buf_sz = (oops_data_sz * 100) / 45;
 	big_oops_buf = kmalloc(big_oops_buf_sz, GFP_KERNEL);
 	if (big_oops_buf) {
-		size = max(zlib_deflate_workspacesize(WINDOW_BITS, MEM_LEVEL),
-			zlib_inflate_workspacesize());
-		stream.workspace = kmalloc(size, GFP_KERNEL);
+		stream.workspace =  kmalloc(zlib_deflate_workspacesize(
+					WINDOW_BITS, MEM_LEVEL), GFP_KERNEL);
 		if (!stream.workspace) {
 			pr_err("nvram: No memory for compression workspace; "
 				"skipping compression of %s partition data\n",
@@ -847,11 +782,6 @@ static void __init nvram_init_oops_partition(int rtas_partition_exists)
 		stream.workspace = NULL;
 	}
 
-	rc = nvram_pstore_init();
-
-	if (!rc)
-		return;
-
 	rc = kmsg_dump_register(&nvram_kmsg_dumper);
 	if (rc != 0) {
 		pr_err("nvram: kmsg_dump_register() failed; returned %d\n", rc);
diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c
index 4644efa0..a166e38 100644
--- a/arch/powerpc/platforms/pseries/processor_idle.c
+++ b/arch/powerpc/platforms/pseries/processor_idle.c
@@ -18,9 +18,7 @@
 #include <asm/machdep.h>
 #include <asm/firmware.h>
 #include <asm/runlatch.h>
-
-#include "plpar_wrappers.h"
-#include "pseries.h"
+#include <asm/plpar_wrappers.h>
 
 struct cpuidle_driver pseries_idle_driver = {
 	.name             = "pseries_idle",
@@ -45,7 +43,11 @@ static inline void idle_loop_prolog(unsigned long *in_purr)
 
 static inline void idle_loop_epilog(unsigned long in_purr)
 {
-	get_lppaca()->wait_state_cycles += mfspr(SPRN_PURR) - in_purr;
+	u64 wait_cycles;
+
+	wait_cycles = be64_to_cpu(get_lppaca()->wait_state_cycles);
+	wait_cycles += mfspr(SPRN_PURR) - in_purr;
+	get_lppaca()->wait_state_cycles = cpu_to_be64(wait_cycles);
 	get_lppaca()->idle = 0;
 }
 
@@ -308,7 +310,7 @@ static int pseries_idle_probe(void)
 		return -EPERM;
 	}
 
-	if (get_lppaca()->shared_proc)
+	if (lppaca_shared_proc(get_lppaca()))
 		cpuidle_state_table = shared_states;
 	else
 		cpuidle_state_table = dedicated_states;
diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h
index c2a3a25..9921953 100644
--- a/arch/powerpc/platforms/pseries/pseries.h
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -56,13 +56,10 @@ extern void hvc_vio_init_early(void);
 /* Dynamic logical Partitioning/Mobility */
 extern void dlpar_free_cc_nodes(struct device_node *);
 extern void dlpar_free_cc_property(struct property *);
-extern struct device_node *dlpar_configure_connector(u32);
+extern struct device_node *dlpar_configure_connector(u32, struct device_node *);
 extern int dlpar_attach_node(struct device_node *);
 extern int dlpar_detach_node(struct device_node *);
 
-/* Snooze Delay, pseries_idle */
-DECLARE_PER_CPU(long, smt_snooze_delay);
-
 /* PCI root bridge prepare function override for pseries */
 struct pci_host_bridge;
 int pseries_root_bridge_prepare(struct pci_host_bridge *bridge);
diff --git a/arch/powerpc/platforms/pseries/pseries_energy.c b/arch/powerpc/platforms/pseries/pseries_energy.c
index a91e6da..9276779 100644
--- a/arch/powerpc/platforms/pseries/pseries_energy.c
+++ b/arch/powerpc/platforms/pseries/pseries_energy.c
@@ -108,8 +108,8 @@ err:
  * energy consumption.
  */
 
-#define FLAGS_MODE1	0x004E200000080E01
-#define FLAGS_MODE2	0x004E200000080401
+#define FLAGS_MODE1	0x004E200000080E01UL
+#define FLAGS_MODE2	0x004E200000080401UL
 #define FLAGS_ACTIVATE  0x100
 
 static ssize_t get_best_energy_list(char *page, int activate)
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index c11c823..1f97e2b 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -66,8 +66,8 @@
 #include <asm/firmware.h>
 #include <asm/eeh.h>
 #include <asm/reg.h>
+#include <asm/plpar_wrappers.h>
 
-#include "plpar_wrappers.h"
 #include "pseries.h"
 
 int CMO_PrPSP = -1;
@@ -183,7 +183,7 @@ static void __init pseries_mpic_init_IRQ(void)
 	np = of_find_node_by_path("/");
 	naddr = of_n_addr_cells(np);
 	opprop = of_get_property(np, "platform-open-pic", &opplen);
-	if (opprop != 0) {
+	if (opprop != NULL) {
 		openpic_addr = of_read_number(opprop, naddr);
 		printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr);
 	}
@@ -323,7 +323,7 @@ static int alloc_dispatch_logs(void)
 	get_paca()->lppaca_ptr->dtl_idx = 0;
 
 	/* hypervisor reads buffer length from this field */
-	dtl->enqueue_to_dispatch_time = DISPATCH_LOG_BYTES;
+	dtl->enqueue_to_dispatch_time = cpu_to_be32(DISPATCH_LOG_BYTES);
 	ret = register_dtl(hard_smp_processor_id(), __pa(dtl));
 	if (ret)
 		pr_err("WARNING: DTL registration of cpu %d (hw %d) failed "
@@ -354,7 +354,7 @@ static int alloc_dispatch_log_kmem_cache(void)
 }
 early_initcall(alloc_dispatch_log_kmem_cache);
 
-static void pSeries_idle(void)
+static void pseries_lpar_idle(void)
 {
 	/* This would call on the cpuidle framework, and the back-end pseries
 	 * driver to  go to idle states
@@ -362,10 +362,22 @@ static void pSeries_idle(void)
 	if (cpuidle_idle_call()) {
 		/* On error, execute default handler
 		 * to go into low thread priority and possibly
-		 * low power mode.
+		 * low power mode by cedeing processor to hypervisor
 		 */
-		HMT_low();
-		HMT_very_low();
+
+		/* Indicate to hypervisor that we are idle. */
+		get_lppaca()->idle = 1;
+
+		/*
+		 * Yield the processor to the hypervisor.  We return if
+		 * an external interrupt occurs (which are driven prior
+		 * to returning here) or if a prod occurs from another
+		 * processor. When returning here, external interrupts
+		 * are enabled.
+		 */
+		cede_processor();
+
+		get_lppaca()->idle = 0;
 	}
 }
 
@@ -456,15 +468,14 @@ static void __init pSeries_setup_arch(void)
 
 	pSeries_nvram_init();
 
-	if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
+	if (firmware_has_feature(FW_FEATURE_LPAR)) {
 		vpa_init(boot_cpuid);
-		ppc_md.power_save = pSeries_idle;
-	}
-
-	if (firmware_has_feature(FW_FEATURE_LPAR))
+		ppc_md.power_save = pseries_lpar_idle;
 		ppc_md.enable_pmcs = pseries_lpar_enable_pmcs;
-	else
+	} else {
+		/* No special idle routine */
 		ppc_md.enable_pmcs = power4_enable_pmcs;
+	}
 
 	ppc_md.pcibios_root_bridge_prepare = pseries_root_bridge_prepare;
 
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 306643c..24f58cb 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -43,8 +43,8 @@
 #include <asm/cputhreads.h>
 #include <asm/xics.h>
 #include <asm/dbell.h>
+#include <asm/plpar_wrappers.h>
 
-#include "plpar_wrappers.h"
 #include "pseries.h"
 #include "offline_states.h"
 
@@ -187,22 +187,6 @@ static int smp_pSeries_kick_cpu(int nr)
 	return 0;
 }
 
-static int smp_pSeries_cpu_bootable(unsigned int nr)
-{
-	/* Special case - we inhibit secondary thread startup
-	 * during boot if the user requests it.
-	 */
-	if (system_state == SYSTEM_BOOTING && cpu_has_feature(CPU_FTR_SMT)) {
-		if (!smt_enabled_at_boot && cpu_thread_in_core(nr) != 0)
-			return 0;
-		if (smt_enabled_at_boot
-		    && cpu_thread_in_core(nr) >= smt_enabled_at_boot)
-			return 0;
-	}
-
-	return 1;
-}
-
 /* Only used on systems that support multiple IPI mechanisms */
 static void pSeries_cause_ipi_mux(int cpu, unsigned long data)
 {
@@ -237,7 +221,7 @@ static struct smp_ops_t pSeries_xics_smp_ops = {
 	.probe		= pSeries_smp_probe,
 	.kick_cpu	= smp_pSeries_kick_cpu,
 	.setup_cpu	= smp_xics_setup_cpu,
-	.cpu_bootable	= smp_pSeries_cpu_bootable,
+	.cpu_bootable	= smp_generic_cpu_bootable,
 };
 
 /* This is called very early */
@@ -249,18 +233,24 @@ static void __init smp_init_pseries(void)
 
 	alloc_bootmem_cpumask_var(&of_spin_mask);
 
-	/* Mark threads which are still spinning in hold loops. */
-	if (cpu_has_feature(CPU_FTR_SMT)) {
-		for_each_present_cpu(i) { 
-			if (cpu_thread_in_core(i) == 0)
-				cpumask_set_cpu(i, of_spin_mask);
-		}
-	} else {
-		cpumask_copy(of_spin_mask, cpu_present_mask);
+	/*
+	 * Mark threads which are still spinning in hold loops
+	 *
+	 * We know prom_init will not have started them if RTAS supports
+	 * query-cpu-stopped-state.
+	 */
+	if (rtas_token("query-cpu-stopped-state") == RTAS_UNKNOWN_SERVICE) {
+		if (cpu_has_feature(CPU_FTR_SMT)) {
+			for_each_present_cpu(i) {
+				if (cpu_thread_in_core(i) == 0)
+					cpumask_set_cpu(i, of_spin_mask);
+			}
+		} else
+			cpumask_copy(of_spin_mask, cpu_present_mask);
+
+		cpumask_clear_cpu(boot_cpuid, of_spin_mask);
 	}
 
-	cpumask_clear_cpu(boot_cpuid, of_spin_mask);
-
 	/* Non-lpar has additional take/give timebase */
 	if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
 		smp_ops->give_timebase = rtas_give_timebase;
diff --git a/arch/powerpc/platforms/wsp/wsp.h b/arch/powerpc/platforms/wsp/wsp.h
index 62ef21a..a563a8a 100644
--- a/arch/powerpc/platforms/wsp/wsp.h
+++ b/arch/powerpc/platforms/wsp/wsp.h
@@ -17,7 +17,6 @@ extern void scom_init_wsp(void);
 extern void a2_setup_smp(void);
 extern int a2_scom_startup_cpu(unsigned int lcpu, int thr_idx,
 			       struct device_node *np);
-extern int smp_a2_cpu_bootable(unsigned int nr);
 extern int smp_a2_kick_cpu(int nr);
 
 extern void opb_pic_init(void);
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
index ab02db3..77efbae 100644
--- a/arch/powerpc/sysdev/fsl_msi.c
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -28,6 +28,18 @@
 #include "fsl_msi.h"
 #include "fsl_pci.h"
 
+#define MSIIR_OFFSET_MASK	0xfffff
+#define MSIIR_IBS_SHIFT		0
+#define MSIIR_SRS_SHIFT		5
+#define MSIIR1_IBS_SHIFT	4
+#define MSIIR1_SRS_SHIFT	0
+#define MSI_SRS_MASK		0xf
+#define MSI_IBS_MASK		0x1f
+
+#define msi_hwirq(msi, msir_index, intr_index) \
+		((msir_index) << (msi)->srs_shift | \
+		 ((intr_index) << (msi)->ibs_shift))
+
 static LIST_HEAD(msi_head);
 
 struct fsl_msi_feature {
@@ -80,18 +92,19 @@ static const struct irq_domain_ops fsl_msi_host_ops = {
 
 static int fsl_msi_init_allocator(struct fsl_msi *msi_data)
 {
-	int rc;
+	int rc, hwirq;
 
-	rc = msi_bitmap_alloc(&msi_data->bitmap, NR_MSI_IRQS,
+	rc = msi_bitmap_alloc(&msi_data->bitmap, NR_MSI_IRQS_MAX,
 			      msi_data->irqhost->of_node);
 	if (rc)
 		return rc;
 
-	rc = msi_bitmap_reserve_dt_hwirqs(&msi_data->bitmap);
-	if (rc < 0) {
-		msi_bitmap_free(&msi_data->bitmap);
-		return rc;
-	}
+	/*
+	 * Reserve all the hwirqs
+	 * The available hwirqs will be released in fsl_msi_setup_hwirq()
+	 */
+	for (hwirq = 0; hwirq < NR_MSI_IRQS_MAX; hwirq++)
+		msi_bitmap_reserve_hwirq(&msi_data->bitmap, hwirq);
 
 	return 0;
 }
@@ -144,8 +157,9 @@ static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq,
 
 	msg->data = hwirq;
 
-	pr_debug("%s: allocated srs: %d, ibs: %d\n",
-		__func__, hwirq / IRQS_PER_MSI_REG, hwirq % IRQS_PER_MSI_REG);
+	pr_debug("%s: allocated srs: %d, ibs: %d\n", __func__,
+		 (hwirq >> msi_data->srs_shift) & MSI_SRS_MASK,
+		 (hwirq >> msi_data->ibs_shift) & MSI_IBS_MASK);
 }
 
 static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
@@ -255,7 +269,7 @@ static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc)
 
 	msir_index = cascade_data->index;
 
-	if (msir_index >= NR_MSI_REG)
+	if (msir_index >= NR_MSI_REG_MAX)
 		cascade_irq = NO_IRQ;
 
 	irqd_set_chained_irq_inprogress(idata);
@@ -285,8 +299,8 @@ static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc)
 		intr_index = ffs(msir_value) - 1;
 
 		cascade_irq = irq_linear_revmap(msi_data->irqhost,
-				msir_index * IRQS_PER_MSI_REG +
-					intr_index + have_shift);
+				msi_hwirq(msi_data, msir_index,
+					  intr_index + have_shift));
 		if (cascade_irq != NO_IRQ)
 			generic_handle_irq(cascade_irq);
 		have_shift += intr_index + 1;
@@ -316,7 +330,7 @@ static int fsl_of_msi_remove(struct platform_device *ofdev)
 
 	if (msi->list.prev != NULL)
 		list_del(&msi->list);
-	for (i = 0; i < NR_MSI_REG; i++) {
+	for (i = 0; i < NR_MSI_REG_MAX; i++) {
 		virq = msi->msi_virqs[i];
 		if (virq != NO_IRQ) {
 			cascade_data = irq_get_handler_data(virq);
@@ -339,7 +353,7 @@ static int fsl_msi_setup_hwirq(struct fsl_msi *msi, struct platform_device *dev,
 			       int offset, int irq_index)
 {
 	struct fsl_msi_cascade_data *cascade_data = NULL;
-	int virt_msir;
+	int virt_msir, i;
 
 	virt_msir = irq_of_parse_and_map(dev->dev.of_node, irq_index);
 	if (virt_msir == NO_IRQ) {
@@ -360,6 +374,11 @@ static int fsl_msi_setup_hwirq(struct fsl_msi *msi, struct platform_device *dev,
 	irq_set_handler_data(virt_msir, cascade_data);
 	irq_set_chained_handler(virt_msir, fsl_msi_cascade);
 
+	/* Release the hwirqs corresponding to this MSI register */
+	for (i = 0; i < IRQS_PER_MSI_REG; i++)
+		msi_bitmap_free_hwirqs(&msi->bitmap,
+				       msi_hwirq(msi, offset, i), 1);
+
 	return 0;
 }
 
@@ -368,14 +387,12 @@ static int fsl_of_msi_probe(struct platform_device *dev)
 {
 	const struct of_device_id *match;
 	struct fsl_msi *msi;
-	struct resource res;
+	struct resource res, msiir;
 	int err, i, j, irq_index, count;
-	int rc;
 	const u32 *p;
 	const struct fsl_msi_feature *features;
 	int len;
 	u32 offset;
-	static const u32 all_avail[] = { 0, NR_MSI_IRQS };
 
 	match = of_match_device(fsl_of_msi_ids, &dev->dev);
 	if (!match)
@@ -392,7 +409,7 @@ static int fsl_of_msi_probe(struct platform_device *dev)
 	platform_set_drvdata(dev, msi);
 
 	msi->irqhost = irq_domain_add_linear(dev->dev.of_node,
-				      NR_MSI_IRQS, &fsl_msi_host_ops, msi);
+				      NR_MSI_IRQS_MAX, &fsl_msi_host_ops, msi);
 
 	if (msi->irqhost == NULL) {
 		dev_err(&dev->dev, "No memory for MSI irqhost\n");
@@ -421,6 +438,16 @@ static int fsl_of_msi_probe(struct platform_device *dev)
 		}
 		msi->msiir_offset =
 			features->msiir_offset + (res.start & 0xfffff);
+
+		/*
+		 * First read the MSIIR/MSIIR1 offset from dts
+		 * On failure use the hardcode MSIIR offset
+		 */
+		if (of_address_to_resource(dev->dev.of_node, 1, &msiir))
+			msi->msiir_offset = features->msiir_offset +
+					    (res.start & MSIIR_OFFSET_MASK);
+		else
+			msi->msiir_offset = msiir.start & MSIIR_OFFSET_MASK;
 	}
 
 	msi->feature = features->fsl_pic_ip;
@@ -431,42 +458,66 @@ static int fsl_of_msi_probe(struct platform_device *dev)
 	 */
 	msi->phandle = dev->dev.of_node->phandle;
 
-	rc = fsl_msi_init_allocator(msi);
-	if (rc) {
+	err = fsl_msi_init_allocator(msi);
+	if (err) {
 		dev_err(&dev->dev, "Error allocating MSI bitmap\n");
 		goto error_out;
 	}
 
 	p = of_get_property(dev->dev.of_node, "msi-available-ranges", &len);
-	if (p && len % (2 * sizeof(u32)) != 0) {
-		dev_err(&dev->dev, "%s: Malformed msi-available-ranges property\n",
-			__func__);
-		err = -EINVAL;
-		goto error_out;
-	}
 
-	if (!p) {
-		p = all_avail;
-		len = sizeof(all_avail);
-	}
+	if (of_device_is_compatible(dev->dev.of_node, "fsl,mpic-msi-v4.3")) {
+		msi->srs_shift = MSIIR1_SRS_SHIFT;
+		msi->ibs_shift = MSIIR1_IBS_SHIFT;
+		if (p)
+			dev_warn(&dev->dev, "%s: dose not support msi-available-ranges property\n",
+				__func__);
+
+		for (irq_index = 0; irq_index < NR_MSI_REG_MSIIR1;
+		     irq_index++) {
+			err = fsl_msi_setup_hwirq(msi, dev,
+						  irq_index, irq_index);
+			if (err)
+				goto error_out;
+		}
+	} else {
+		static const u32 all_avail[] =
+			{ 0, NR_MSI_REG_MSIIR * IRQS_PER_MSI_REG };
 
-	for (irq_index = 0, i = 0; i < len / (2 * sizeof(u32)); i++) {
-		if (p[i * 2] % IRQS_PER_MSI_REG ||
-		    p[i * 2 + 1] % IRQS_PER_MSI_REG) {
-			printk(KERN_WARNING "%s: %s: msi available range of %u at %u is not IRQ-aligned\n",
-			       __func__, dev->dev.of_node->full_name,
-			       p[i * 2 + 1], p[i * 2]);
+		msi->srs_shift = MSIIR_SRS_SHIFT;
+		msi->ibs_shift = MSIIR_IBS_SHIFT;
+
+		if (p && len % (2 * sizeof(u32)) != 0) {
+			dev_err(&dev->dev, "%s: Malformed msi-available-ranges property\n",
+				__func__);
 			err = -EINVAL;
 			goto error_out;
 		}
 
-		offset = p[i * 2] / IRQS_PER_MSI_REG;
-		count = p[i * 2 + 1] / IRQS_PER_MSI_REG;
+		if (!p) {
+			p = all_avail;
+			len = sizeof(all_avail);
+		}
 
-		for (j = 0; j < count; j++, irq_index++) {
-			err = fsl_msi_setup_hwirq(msi, dev, offset + j, irq_index);
-			if (err)
+		for (irq_index = 0, i = 0; i < len / (2 * sizeof(u32)); i++) {
+			if (p[i * 2] % IRQS_PER_MSI_REG ||
+			    p[i * 2 + 1] % IRQS_PER_MSI_REG) {
+				pr_warn("%s: %s: msi available range of %u at %u is not IRQ-aligned\n",
+				       __func__, dev->dev.of_node->full_name,
+				       p[i * 2 + 1], p[i * 2]);
+				err = -EINVAL;
 				goto error_out;
+			}
+
+			offset = p[i * 2] / IRQS_PER_MSI_REG;
+			count = p[i * 2 + 1] / IRQS_PER_MSI_REG;
+
+			for (j = 0; j < count; j++, irq_index++) {
+				err = fsl_msi_setup_hwirq(msi, dev, offset + j,
+							  irq_index);
+				if (err)
+					goto error_out;
+			}
 		}
 	}
 
@@ -509,6 +560,10 @@ static const struct of_device_id fsl_of_msi_ids[] = {
 		.data = &mpic_msi_feature,
 	},
 	{
+		.compatible = "fsl,mpic-msi-v4.3",
+		.data = &mpic_msi_feature,
+	},
+	{
 		.compatible = "fsl,ipic-msi",
 		.data = &ipic_msi_feature,
 	},
diff --git a/arch/powerpc/sysdev/fsl_msi.h b/arch/powerpc/sysdev/fsl_msi.h
index 8225f86..df9aa9f 100644
--- a/arch/powerpc/sysdev/fsl_msi.h
+++ b/arch/powerpc/sysdev/fsl_msi.h
@@ -16,9 +16,11 @@
 #include <linux/of.h>
 #include <asm/msi_bitmap.h>
 
-#define NR_MSI_REG		8
+#define NR_MSI_REG_MSIIR	8  /* MSIIR can index 8 MSI registers */
+#define NR_MSI_REG_MSIIR1	16 /* MSIIR1 can index 16 MSI registers */
+#define NR_MSI_REG_MAX		NR_MSI_REG_MSIIR1
 #define IRQS_PER_MSI_REG	32
-#define NR_MSI_IRQS	(NR_MSI_REG * IRQS_PER_MSI_REG)
+#define NR_MSI_IRQS_MAX	(NR_MSI_REG_MAX * IRQS_PER_MSI_REG)
 
 #define FSL_PIC_IP_MASK   0x0000000F
 #define FSL_PIC_IP_MPIC   0x00000001
@@ -31,9 +33,11 @@ struct fsl_msi {
 	unsigned long cascade_irq;
 
 	u32 msiir_offset; /* Offset of MSIIR, relative to start of CCSR */
+	u32 ibs_shift; /* Shift of interrupt bit select */
+	u32 srs_shift; /* Shift of the shared interrupt register select */
 	void __iomem *msi_regs;
 	u32 feature;
-	int msi_virqs[NR_MSI_REG];
+	int msi_virqs[NR_MSI_REG_MAX];
 
 	struct msi_bitmap bitmap;
 
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 46ac1dd..ccfb50d 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -26,11 +26,15 @@
 #include <linux/memblock.h>
 #include <linux/log2.h>
 #include <linux/slab.h>
+#include <linux/uaccess.h>
 
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
 #include <asm/machdep.h>
+#include <asm/disassemble.h>
+#include <asm/ppc-opcode.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
@@ -64,7 +68,7 @@ static int fsl_pcie_check_link(struct pci_controller *hose)
 	if (hose->indirect_type & PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK) {
 		if (hose->ops->read == fsl_indirect_read_config) {
 			struct pci_bus bus;
-			bus.number = 0;
+			bus.number = hose->first_busno;
 			bus.sysdata = hose;
 			bus.ops = hose->ops;
 			indirect_read_config(&bus, 0, PCIE_LTSSM, 4, &val);
@@ -297,10 +301,10 @@ static void setup_pci_atmu(struct pci_controller *hose)
 	if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
 		/* Size window to exact size if power-of-two or one size up */
 		if ((1ull << mem_log) != mem) {
+			mem_log++;
 			if ((1ull << mem_log) > mem)
 				pr_info("%s: Setting PCI inbound window "
 					"greater than memory size\n", name);
-			mem_log++;
 		}
 
 		piwar |= ((mem_log - 1) & PIWAR_SZ_MASK);
@@ -373,7 +377,9 @@ static void setup_pci_atmu(struct pci_controller *hose)
 	}
 
 	if (hose->dma_window_size < mem) {
-#ifndef CONFIG_SWIOTLB
+#ifdef CONFIG_SWIOTLB
+		ppc_swiotlb_enable = 1;
+#else
 		pr_err("%s: ERROR: Memory size exceeds PCI ATMU ability to "
 			"map - enable CONFIG_SWIOTLB to avoid dma errors.\n",
 			 name);
@@ -868,6 +874,160 @@ u64 fsl_pci_immrbar_base(struct pci_controller *hose)
 	return 0;
 }
 
+#ifdef CONFIG_E500
+static int mcheck_handle_load(struct pt_regs *regs, u32 inst)
+{
+	unsigned int rd, ra, rb, d;
+
+	rd = get_rt(inst);
+	ra = get_ra(inst);
+	rb = get_rb(inst);
+	d = get_d(inst);
+
+	switch (get_op(inst)) {
+	case 31:
+		switch (get_xop(inst)) {
+		case OP_31_XOP_LWZX:
+		case OP_31_XOP_LWBRX:
+			regs->gpr[rd] = 0xffffffff;
+			break;
+
+		case OP_31_XOP_LWZUX:
+			regs->gpr[rd] = 0xffffffff;
+			regs->gpr[ra] += regs->gpr[rb];
+			break;
+
+		case OP_31_XOP_LBZX:
+			regs->gpr[rd] = 0xff;
+			break;
+
+		case OP_31_XOP_LBZUX:
+			regs->gpr[rd] = 0xff;
+			regs->gpr[ra] += regs->gpr[rb];
+			break;
+
+		case OP_31_XOP_LHZX:
+		case OP_31_XOP_LHBRX:
+			regs->gpr[rd] = 0xffff;
+			break;
+
+		case OP_31_XOP_LHZUX:
+			regs->gpr[rd] = 0xffff;
+			regs->gpr[ra] += regs->gpr[rb];
+			break;
+
+		case OP_31_XOP_LHAX:
+			regs->gpr[rd] = ~0UL;
+			break;
+
+		case OP_31_XOP_LHAUX:
+			regs->gpr[rd] = ~0UL;
+			regs->gpr[ra] += regs->gpr[rb];
+			break;
+
+		default:
+			return 0;
+		}
+		break;
+
+	case OP_LWZ:
+		regs->gpr[rd] = 0xffffffff;
+		break;
+
+	case OP_LWZU:
+		regs->gpr[rd] = 0xffffffff;
+		regs->gpr[ra] += (s16)d;
+		break;
+
+	case OP_LBZ:
+		regs->gpr[rd] = 0xff;
+		break;
+
+	case OP_LBZU:
+		regs->gpr[rd] = 0xff;
+		regs->gpr[ra] += (s16)d;
+		break;
+
+	case OP_LHZ:
+		regs->gpr[rd] = 0xffff;
+		break;
+
+	case OP_LHZU:
+		regs->gpr[rd] = 0xffff;
+		regs->gpr[ra] += (s16)d;
+		break;
+
+	case OP_LHA:
+		regs->gpr[rd] = ~0UL;
+		break;
+
+	case OP_LHAU:
+		regs->gpr[rd] = ~0UL;
+		regs->gpr[ra] += (s16)d;
+		break;
+
+	default:
+		return 0;
+	}
+
+	return 1;
+}
+
+static int is_in_pci_mem_space(phys_addr_t addr)
+{
+	struct pci_controller *hose;
+	struct resource *res;
+	int i;
+
+	list_for_each_entry(hose, &hose_list, list_node) {
+		if (!(hose->indirect_type & PPC_INDIRECT_TYPE_EXT_REG))
+			continue;
+
+		for (i = 0; i < 3; i++) {
+			res = &hose->mem_resources[i];
+			if ((res->flags & IORESOURCE_MEM) &&
+				addr >= res->start && addr <= res->end)
+				return 1;
+		}
+	}
+	return 0;
+}
+
+int fsl_pci_mcheck_exception(struct pt_regs *regs)
+{
+	u32 inst;
+	int ret;
+	phys_addr_t addr = 0;
+
+	/* Let KVM/QEMU deal with the exception */
+	if (regs->msr & MSR_GS)
+		return 0;
+
+#ifdef CONFIG_PHYS_64BIT
+	addr = mfspr(SPRN_MCARU);
+	addr <<= 32;
+#endif
+	addr += mfspr(SPRN_MCAR);
+
+	if (is_in_pci_mem_space(addr)) {
+		if (user_mode(regs)) {
+			pagefault_disable();
+			ret = get_user(regs->nip, &inst);
+			pagefault_enable();
+		} else {
+			ret = probe_kernel_address(regs->nip, inst);
+		}
+
+		if (mcheck_handle_load(regs, inst)) {
+			regs->nip += 4;
+			return 1;
+		}
+	}
+
+	return 0;
+}
+#endif
+
 #if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
 static const struct of_device_id pci_ids[] = {
 	{ .compatible = "fsl,mpc8540-pci", },
@@ -928,28 +1088,10 @@ static int fsl_pci_probe(struct platform_device *pdev)
 {
 	int ret;
 	struct device_node *node;
-#ifdef CONFIG_SWIOTLB
-	struct pci_controller *hose;
-#endif
 
 	node = pdev->dev.of_node;
 	ret = fsl_add_bridge(pdev, fsl_pci_primary == node);
 
-#ifdef CONFIG_SWIOTLB
-	if (ret == 0) {
-		hose = pci_find_hose_for_OF_device(pdev->dev.of_node);
-
-		/*
-		 * if we couldn't map all of DRAM via the dma windows
-		 * we need SWIOTLB to handle buffers located outside of
-		 * dma capable memory region
-		 */
-		if (memblock_end_of_DRAM() - 1 > hose->dma_window_base_cur +
-				hose->dma_window_size)
-			ppc_swiotlb_enable = 1;
-	}
-#endif
-
 	mpc85xx_pci_err_probe(pdev);
 
 	return 0;
diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h
index 72b5625..8d455df 100644
--- a/arch/powerpc/sysdev/fsl_pci.h
+++ b/arch/powerpc/sysdev/fsl_pci.h
@@ -16,6 +16,11 @@
 
 struct platform_device;
 
+
+/* FSL PCI controller BRR1 register */
+#define PCI_FSL_BRR1      0xbf8
+#define PCI_FSL_BRR1_VER 0xffff
+
 #define PCIE_LTSSM	0x0404		/* PCIE Link Training and Status */
 #define PCIE_LTSSM_L0	0x16		/* L0 state */
 #define PCIE_IP_REV_2_2		0x02080202 /* PCIE IP block version Rev2.2 */
@@ -126,5 +131,11 @@ static inline int mpc85xx_pci_err_probe(struct platform_device *op)
 }
 #endif
 
+#ifdef CONFIG_FSL_PCI
+extern int fsl_pci_mcheck_exception(struct pt_regs *);
+#else
+static inline int fsl_pci_mcheck_exception(struct pt_regs *regs) {return 0; }
+#endif
+
 #endif /* __POWERPC_FSL_PCI_H */
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/sysdev/rtc_cmos_setup.c b/arch/powerpc/sysdev/rtc_cmos_setup.c
index af79e1e..af0f9be 100644
--- a/arch/powerpc/sysdev/rtc_cmos_setup.c
+++ b/arch/powerpc/sysdev/rtc_cmos_setup.c
@@ -62,7 +62,7 @@ static int  __init add_rtc(void)
 	pd = platform_device_register_simple("rtc_cmos", -1,
 					     &res[0], num_res);
 
-	return PTR_RET(pd);
+	return PTR_ERR_OR_ZERO(pd);
 }
 fs_initcall(add_rtc);
 
diff --git a/arch/powerpc/sysdev/xics/icp-native.c b/arch/powerpc/sysdev/xics/icp-native.c
index 7cd728b..9dee470 100644
--- a/arch/powerpc/sysdev/xics/icp-native.c
+++ b/arch/powerpc/sysdev/xics/icp-native.c
@@ -216,7 +216,7 @@ static int __init icp_native_init_one_node(struct device_node *np,
 					   unsigned int *indx)
 {
 	unsigned int ilen;
-	const u32 *ireg;
+	const __be32 *ireg;
 	int i;
 	int reg_tuple_size;
 	int num_servers = 0;
diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c
index 9049d9f..fe0cca4 100644
--- a/arch/powerpc/sysdev/xics/xics-common.c
+++ b/arch/powerpc/sysdev/xics/xics-common.c
@@ -49,7 +49,7 @@ void xics_update_irq_servers(void)
 	int i, j;
 	struct device_node *np;
 	u32 ilen;
-	const u32 *ireg;
+	const __be32 *ireg;
 	u32 hcpuid;
 
 	/* Find the server numbers for the boot cpu. */
@@ -75,8 +75,8 @@ void xics_update_irq_servers(void)
 	 * default distribution server
 	 */
 	for (j = 0; j < i; j += 2) {
-		if (ireg[j] == hcpuid) {
-			xics_default_distrib_server = ireg[j+1];
+		if (be32_to_cpu(ireg[j]) == hcpuid) {
+			xics_default_distrib_server = be32_to_cpu(ireg[j+1]);
 			break;
 		}
 	}
@@ -383,7 +383,7 @@ void __init xics_register_ics(struct ics *ics)
 static void __init xics_get_server_size(void)
 {
 	struct device_node *np;
-	const u32 *isize;
+	const __be32 *isize;
 
 	/* We fetch the interrupt server size from the first ICS node
 	 * we find if any
@@ -394,7 +394,7 @@ static void __init xics_get_server_size(void)
 	isize = of_get_property(np, "ibm,interrupt-server#-size", NULL);
 	if (!isize)
 		return;
-	xics_interrupt_server_size = *isize;
+	xics_interrupt_server_size = be32_to_cpu(*isize);
 	of_node_put(np);
 }
 
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 96bf5bd..af9d346 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -972,27 +972,27 @@ static void bootcmds(void)
 static int cpu_cmd(void)
 {
 #ifdef CONFIG_SMP
-	unsigned long cpu;
+	unsigned long cpu, first_cpu, last_cpu;
 	int timeout;
-	int count;
 
 	if (!scanhex(&cpu)) {
 		/* print cpus waiting or in xmon */
 		printf("cpus stopped:");
-		count = 0;
+		last_cpu = first_cpu = NR_CPUS;
 		for_each_possible_cpu(cpu) {
 			if (cpumask_test_cpu(cpu, &cpus_in_xmon)) {
-				if (count == 0)
-					printf(" %x", cpu);
-				++count;
-			} else {
-				if (count > 1)
-					printf("-%x", cpu - 1);
-				count = 0;
+				if (cpu == last_cpu + 1) {
+					last_cpu = cpu;
+				} else {
+					if (last_cpu != first_cpu)
+						printf("-%lx", last_cpu);
+					last_cpu = first_cpu = cpu;
+					printf(" %lx", cpu);
+				}
 			}
 		}
-		if (count > 1)
-			printf("-%x", NR_CPUS - 1);
+		if (last_cpu != first_cpu)
+			printf("-%lx", last_cpu);
 		printf("\n");
 		return 0;
 	}
@@ -1256,11 +1256,18 @@ const char *getvecname(unsigned long vec)
 	case 0x700:	ret = "(Program Check)"; break;
 	case 0x800:	ret = "(FPU Unavailable)"; break;
 	case 0x900:	ret = "(Decrementer)"; break;
+	case 0x980:	ret = "(Hypervisor Decrementer)"; break;
+	case 0xa00:	ret = "(Doorbell)"; break;
 	case 0xc00:	ret = "(System Call)"; break;
 	case 0xd00:	ret = "(Single Step)"; break;
+	case 0xe40:	ret = "(Emulation Assist)"; break;
+	case 0xe60:	ret = "(HMI)"; break;
+	case 0xe80:	ret = "(Hypervisor Doorbell)"; break;
 	case 0xf00:	ret = "(Performance Monitor)"; break;
 	case 0xf20:	ret = "(Altivec Unavailable)"; break;
 	case 0x1300:	ret = "(Instruction Breakpoint)"; break;
+	case 0x1500:	ret = "(Denormalisation)"; break;
+	case 0x1700:	ret = "(Altivec Assist)"; break;
 	default: ret = "";
 	}
 	return ret;
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 8a4cae7..f75d7e5 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -62,6 +62,7 @@ config S390
 	def_bool y
 	select ARCH_DISCARD_MEMBLOCK
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
+	select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select ARCH_INLINE_READ_LOCK
 	select ARCH_INLINE_READ_LOCK_BH
@@ -91,18 +92,18 @@ config S390
 	select ARCH_INLINE_WRITE_UNLOCK_BH
 	select ARCH_INLINE_WRITE_UNLOCK_IRQ
 	select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
-	select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS
 	select ARCH_SAVE_PAGE_KEYS if HIBERNATION
+	select ARCH_USE_CMPXCHG_LOCKREF
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select BUILDTIME_EXTABLE_SORT
 	select CLONE_BACKWARDS2
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CPU_DEVICES if !SMP
+	select GENERIC_FIND_FIRST_BIT
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_TIME_VSYSCALL_OLD
 	select HAVE_ALIGNED_STRUCT_PAGE if SLUB
 	select HAVE_ARCH_JUMP_LABEL if !MARCH_G5
-	select HAVE_ARCH_MUTEX_CPU_RELAX
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if 64BIT
@@ -134,15 +135,15 @@ config S390
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_UID16 if 32BIT
 	select HAVE_VIRT_CPU_ACCOUNTING
-	select VIRT_TO_BUS
 	select INIT_ALL_POSSIBLE
 	select KTIME_SCALAR if 32BIT
 	select MODULES_USE_ELF_RELA
-	select OLD_SIGSUSPEND3
 	select OLD_SIGACTION
+	select OLD_SIGSUSPEND3
 	select SYSCTL_EXCEPTION_TRACE
 	select USE_GENERIC_SMP_HELPERS if SMP
 	select VIRT_CPU_ACCOUNTING
+	select VIRT_TO_BUS
 
 config SCHED_OMIT_FRAME_POINTER
 	def_bool y
@@ -237,6 +238,67 @@ config MARCH_ZEC12
 
 endchoice
 
+config MARCH_G5_TUNE
+	def_bool TUNE_G5 || MARCH_G5 && TUNE_DEFAULT
+
+config MARCH_Z900_TUNE
+	def_bool TUNE_Z900 || MARCH_Z900 && TUNE_DEFAULT
+
+config MARCH_Z990_TUNE
+	def_bool TUNE_Z990 || MARCH_Z990 && TUNE_DEFAULT
+
+config MARCH_Z9_109_TUNE
+	def_bool TUNE_Z9_109 || MARCH_Z9_109 && TUNE_DEFAULT
+
+config MARCH_Z10_TUNE
+	def_bool TUNE_Z10 || MARCH_Z10 && TUNE_DEFAULT
+
+config MARCH_Z196_TUNE
+	def_bool TUNE_Z196 || MARCH_Z196 && TUNE_DEFAULT
+
+config MARCH_ZEC12_TUNE
+	def_bool TUNE_ZEC12 || MARCH_ZEC12 && TUNE_DEFAULT
+
+choice
+	prompt "Tune code generation"
+	default TUNE_DEFAULT
+	help
+	  Cause the compiler to tune (-mtune) the generated code for a machine.
+	  This will make the code run faster on the selected machine but
+	  somewhat slower on other machines.
+	  This option only changes how the compiler emits instructions, not the
+	  selection of instructions itself, so the resulting kernel will run on
+	  all other machines.
+
+config TUNE_DEFAULT
+	bool "Default"
+	help
+	  Tune the generated code for the target processor for which the kernel
+	  will be compiled.
+
+config TUNE_G5
+	bool "System/390 model G5 and G6"
+
+config TUNE_Z900
+	bool "IBM zSeries model z800 and z900"
+
+config TUNE_Z990
+	bool "IBM zSeries model z890 and z990"
+
+config TUNE_Z9_109
+	bool "IBM System z9"
+
+config TUNE_Z10
+	bool "IBM System z10"
+
+config TUNE_Z196
+	bool "IBM zEnterprise 114 and 196"
+
+config TUNE_ZEC12
+	bool "IBM zBC12 and zEC12"
+
+endchoice
+
 config 64BIT
 	def_bool y
 	prompt "64 bit kernel"
@@ -430,7 +492,6 @@ menuconfig PCI
 	bool "PCI support"
 	default n
 	depends on 64BIT
-	select ARCH_SUPPORTS_MSI
 	select PCI_MSI
 	help
 	  Enable PCI support.
@@ -445,6 +506,16 @@ config PCI_NR_FUNCTIONS
 	  This allows you to specify the maximum number of PCI functions which
 	  this kernel will support.
 
+config PCI_NR_MSI
+	int "Maximum number of MSI interrupts (64-32768)"
+	range 64 32768
+	default "256"
+	help
+	  This defines the number of virtual interrupts the kernel will
+	  provide for MSI interrupts. If you configure your system to have
+	  too few drivers will fail to allocate MSI interrupts for all
+	  PCI devices.
+
 source "drivers/pci/Kconfig"
 source "drivers/pci/pcie/Kconfig"
 source "drivers/pci/hotplug/Kconfig"
@@ -516,6 +587,7 @@ config CRASH_DUMP
 	bool "kernel crash dumps"
 	depends on 64BIT && SMP
 	select KEXEC
+	select ZFCPDUMP
 	help
 	  Generate crash dump after being started by kexec.
 	  Crash dump kernels are loaded in the main kernel with kexec-tools
@@ -526,7 +598,7 @@ config CRASH_DUMP
 config ZFCPDUMP
 	def_bool n
 	prompt "zfcpdump support"
-	select SMP
+	depends on SMP
 	help
 	  Select this option if you want to build an zfcpdump enabled kernel.
 	  Refer to <file:Documentation/s390/zfcpdump.txt> for more details on this.
diff --git a/arch/s390/Makefile b/arch/s390/Makefile
index a7d68a4..874e6d6 100644
--- a/arch/s390/Makefile
+++ b/arch/s390/Makefile
@@ -35,13 +35,21 @@ endif
 
 export LD_BFD
 
-cflags-$(CONFIG_MARCH_G5)   += $(call cc-option,-march=g5)
-cflags-$(CONFIG_MARCH_Z900) += $(call cc-option,-march=z900)
-cflags-$(CONFIG_MARCH_Z990) += $(call cc-option,-march=z990)
-cflags-$(CONFIG_MARCH_Z9_109) += $(call cc-option,-march=z9-109)
-cflags-$(CONFIG_MARCH_Z10) += $(call cc-option,-march=z10)
-cflags-$(CONFIG_MARCH_Z196) += $(call cc-option,-march=z196)
-cflags-$(CONFIG_MARCH_ZEC12) += $(call cc-option,-march=zEC12)
+cflags-$(CONFIG_MARCH_G5)     += -march=g5
+cflags-$(CONFIG_MARCH_Z900)   += -march=z900
+cflags-$(CONFIG_MARCH_Z990)   += -march=z990
+cflags-$(CONFIG_MARCH_Z9_109) += -march=z9-109
+cflags-$(CONFIG_MARCH_Z10)    += -march=z10
+cflags-$(CONFIG_MARCH_Z196)   += -march=z196
+cflags-$(CONFIG_MARCH_ZEC12)  += -march=zEC12
+
+cflags-$(CONFIG_MARCH_G5_TUNE)		+= -mtune=g5
+cflags-$(CONFIG_MARCH_Z900_TUNE)	+= -mtune=z900
+cflags-$(CONFIG_MARCH_Z990_TUNE)	+= -mtune=z990
+cflags-$(CONFIG_MARCH_Z9_109_TUNE)	+= -mtune=z9-109
+cflags-$(CONFIG_MARCH_Z10_TUNE)		+= -mtune=z10
+cflags-$(CONFIG_MARCH_Z196_TUNE)	+= -mtune=z196
+cflags-$(CONFIG_MARCH_ZEC12_TUNE)	+= -mtune=zEC12
 
 #KBUILD_IMAGE is necessary for make rpm
 KBUILD_IMAGE	:=arch/s390/boot/image
diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c
index 87a2209..4c4a1ce 100644
--- a/arch/s390/appldata/appldata_base.c
+++ b/arch/s390/appldata/appldata_base.c
@@ -48,9 +48,9 @@ static struct platform_device *appldata_pdev;
  * /proc entries (sysctl)
  */
 static const char appldata_proc_name[APPLDATA_PROC_NAME_LENGTH] = "appldata";
-static int appldata_timer_handler(ctl_table *ctl, int write,
+static int appldata_timer_handler(struct ctl_table *ctl, int write,
 				  void __user *buffer, size_t *lenp, loff_t *ppos);
-static int appldata_interval_handler(ctl_table *ctl, int write,
+static int appldata_interval_handler(struct ctl_table *ctl, int write,
 					 void __user *buffer,
 					 size_t *lenp, loff_t *ppos);
 
@@ -201,10 +201,10 @@ static void __appldata_vtimer_setup(int cmd)
  * Start/Stop timer, show status of timer (0 = not active, 1 = active)
  */
 static int
-appldata_timer_handler(ctl_table *ctl, int write,
+appldata_timer_handler(struct ctl_table *ctl, int write,
 			   void __user *buffer, size_t *lenp, loff_t *ppos)
 {
-	int len;
+	unsigned int len;
 	char buf[2];
 
 	if (!*lenp || *ppos) {
@@ -243,10 +243,11 @@ out:
  * current timer interval.
  */
 static int
-appldata_interval_handler(ctl_table *ctl, int write,
+appldata_interval_handler(struct ctl_table *ctl, int write,
 			   void __user *buffer, size_t *lenp, loff_t *ppos)
 {
-	int len, interval;
+	unsigned int len;
+	int interval;
 	char buf[16];
 
 	if (!*lenp || *ppos) {
@@ -286,11 +287,12 @@ out:
  * monitoring (0 = not in process, 1 = in process)
  */
 static int
-appldata_generic_handler(ctl_table *ctl, int write,
+appldata_generic_handler(struct ctl_table *ctl, int write,
 			   void __user *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct appldata_ops *ops = NULL, *tmp_ops;
-	int rc, len, found;
+	unsigned int len;
+	int rc, found;
 	char buf[2];
 	struct list_head *lh;
 
diff --git a/arch/s390/configs/default_defconfig b/arch/s390/configs/default_defconfig
new file mode 100644
index 0000000..e0af2ee
--- /dev/null
+++ b/arch/s390/configs/default_defconfig
@@ -0,0 +1,655 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_AUDIT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_RCU_FAST_NO_HZ=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_PERF=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_KPROBES=y
+CONFIG_JUMP_LABEL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_BLK_DEV_THROTTLING=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_IBM_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_DEFAULT_DEADLINE=y
+CONFIG_MARCH_Z9_109=y
+CONFIG_PREEMPT=y
+CONFIG_HZ_100=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_KSM=y
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_PCI=y
+CONFIG_PCI_DEBUG=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_S390=y
+CONFIG_CHSC_SCH=y
+CONFIG_CRASH_DUMP=y
+CONFIG_ZFCPDUMP=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_HIBERNATION=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=m
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_GRE=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CONNTRACK_TIMEOUT=y
+CONFIG_NF_CONNTRACK_TIMESTAMP=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_PE_SIP=m
+CONFIG_NF_CONNTRACK_IPV4=m
+# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT_IPV4=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+CONFIG_NF_NAT_IPV6=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NET_SCTPPROBE=m
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+CONFIG_RDS_DEBUG=y
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_CODEL=m
+CONFIG_NET_SCH_FQ_CODEL=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_PLUG=m
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+CONFIG_DNS_RESOLVER=y
+CONFIG_BPF_JIT=y
+CONFIG_NET_PKTGEN=m
+CONFIG_NET_TCPPROBE=m
+CONFIG_DEVTMPFS=y
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_XIP=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=y
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_ISCSI_TCP=m
+CONFIG_LIBFCOE=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_ZFCP=y
+CONFIG_SCSI_VIRTIO=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+CONFIG_DM_DELAY=m
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+CONFIG_DM_SWITCH=m
+CONFIG_NETDEVICES=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_IFB=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_VXLAN=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_NLMON=m
+CONFIG_VHOST_NET=m
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+CONFIG_MLX4_EN=m
+# CONFIG_NET_VENDOR_NATSEMI is not set
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTY_COUNT=0
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_RAW_DRIVER=m
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TN3270_FS=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ZVM_WATCHDOG=m
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_VIRTIO_BALLOON=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_JBD_DEBUG=y
+CONFIG_JBD2_DEBUG=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+CONFIG_JFS_STATISTICS=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_XFS_RT=y
+CONFIG_XFS_DEBUG=y
+CONFIG_GFS2_FS=m
+CONFIG_OCFS2_FS=m
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
+CONFIG_FANOTIFY=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_FSCACHE=m
+CONFIG_CACHEFILES=m
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_NTFS_FS=m
+CONFIG_NTFS_RW=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_HUGETLBFS=y
+CONFIG_CONFIGFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_ROMFS_FS=m
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=m
+CONFIG_NFS_SWAP=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_V4_SECURITY_LABEL=y
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_UPCALL=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG is not set
+CONFIG_CIFS_DFS_UPCALL=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_READABLE_ASM=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_PAGEALLOC=y
+CONFIG_SLUB_DEBUG_ON=y
+CONFIG_SLUB_STATS=y
+CONFIG_DEBUG_STACK_USAGE=y
+CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_VM_RB=y
+CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m
+CONFIG_DEBUG_PER_CPU_MAPS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_RT_MUTEX_TESTER=y
+CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCK_STAT=y
+CONFIG_DEBUG_LOCKDEP=y
+CONFIG_DEBUG_ATOMIC_SLEEP=y
+CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
+CONFIG_DEBUG_WRITECOUNT=y
+CONFIG_DEBUG_LIST=y
+CONFIG_DEBUG_SG=y
+CONFIG_DEBUG_NOTIFIERS=y
+CONFIG_DEBUG_CREDENTIALS=y
+CONFIG_PROVE_RCU=y
+CONFIG_RCU_TORTURE_TEST=m
+CONFIG_RCU_CPU_STALL_TIMEOUT=300
+CONFIG_NOTIFIER_ERROR_INJECTION=m
+CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+CONFIG_PM_NOTIFIER_ERROR_INJECT=m
+CONFIG_FAULT_INJECTION=y
+CONFIG_FAILSLAB=y
+CONFIG_FAIL_PAGE_ALLOC=y
+CONFIG_FAIL_MAKE_REQUEST=y
+CONFIG_FAIL_IO_TIMEOUT=y
+CONFIG_FAULT_INJECTION_DEBUG_FS=y
+CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
+CONFIG_LATENCYTOP=y
+CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_KPROBE_EVENT is not set
+CONFIG_LKDTM=m
+CONFIG_KPROBES_SANITY_TEST=y
+CONFIG_RBTREE_TEST=m
+CONFIG_INTERVAL_TREE_TEST=m
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_DMA_API_DEBUG=y
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_S390_PTDUMP=y
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_IMA=y
+CONFIG_IMA_APPRAISE=y
+CONFIG_CRYPTO_USER=m
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_CRC32=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ZLIB=y
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_LZ4=m
+CONFIG_CRYPTO_LZ4HC=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_ZCRYPT=m
+CONFIG_CRYPTO_SHA1_S390=m
+CONFIG_CRYPTO_SHA256_S390=m
+CONFIG_CRYPTO_SHA512_S390=m
+CONFIG_CRYPTO_DES_S390=m
+CONFIG_CRYPTO_AES_S390=m
+CONFIG_CRYPTO_GHASH_S390=m
+CONFIG_ASYMMETRIC_KEY_TYPE=m
+CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
+CONFIG_PUBLIC_KEY_ALGO_RSA=m
+CONFIG_X509_CERTIFICATE_PARSER=m
+CONFIG_CRC7=m
+CONFIG_CRC8=m
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_CORDIC=m
+CONFIG_CMM=m
+CONFIG_APPLDATA_BASE=y
+CONFIG_KVM=m
+CONFIG_KVM_S390_UCONTROL=y
diff --git a/arch/s390/configs/gcov_defconfig b/arch/s390/configs/gcov_defconfig
new file mode 100644
index 0000000..b9f6b4c
--- /dev/null
+++ b/arch/s390/configs/gcov_defconfig
@@ -0,0 +1,618 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_AUDIT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_RCU_FAST_NO_HZ=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_PERF=y
+CONFIG_BLK_CGROUP=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_KPROBES=y
+CONFIG_JUMP_LABEL=y
+CONFIG_GCOV_KERNEL=y
+CONFIG_GCOV_PROFILE_ALL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_BLK_DEV_THROTTLING=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_IBM_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_DEFAULT_DEADLINE=y
+CONFIG_MARCH_Z9_109=y
+CONFIG_HZ_100=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_KSM=y
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_PCI=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_S390=y
+CONFIG_CHSC_SCH=y
+CONFIG_CRASH_DUMP=y
+CONFIG_ZFCPDUMP=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_HIBERNATION=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=m
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_GRE=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CONNTRACK_TIMEOUT=y
+CONFIG_NF_CONNTRACK_TIMESTAMP=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_PE_SIP=m
+CONFIG_NF_CONNTRACK_IPV4=m
+# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT_IPV4=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+CONFIG_NF_NAT_IPV6=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NET_SCTPPROBE=m
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_CODEL=m
+CONFIG_NET_SCH_FQ_CODEL=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_PLUG=m
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+CONFIG_DNS_RESOLVER=y
+CONFIG_BPF_JIT=y
+CONFIG_NET_PKTGEN=m
+CONFIG_NET_TCPPROBE=m
+CONFIG_DEVTMPFS=y
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_XIP=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=y
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_ISCSI_TCP=m
+CONFIG_LIBFCOE=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_ZFCP=y
+CONFIG_SCSI_VIRTIO=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+CONFIG_DM_DELAY=m
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+CONFIG_DM_SWITCH=m
+CONFIG_NETDEVICES=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_IFB=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_VXLAN=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_NLMON=m
+CONFIG_VHOST_NET=m
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+CONFIG_MLX4_EN=m
+# CONFIG_NET_VENDOR_NATSEMI is not set
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTY_COUNT=0
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_RAW_DRIVER=m
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TN3270_FS=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ZVM_WATCHDOG=m
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_VIRTIO_BALLOON=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_JBD_DEBUG=y
+CONFIG_JBD2_DEBUG=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+CONFIG_JFS_STATISTICS=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_XFS_RT=y
+CONFIG_GFS2_FS=m
+CONFIG_OCFS2_FS=m
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
+CONFIG_FANOTIFY=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_FSCACHE=m
+CONFIG_CACHEFILES=m
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_NTFS_FS=m
+CONFIG_NTFS_RW=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_HUGETLBFS=y
+CONFIG_CONFIGFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_ROMFS_FS=m
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=m
+CONFIG_NFS_SWAP=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_V4_SECURITY_LABEL=y
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_UPCALL=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG is not set
+CONFIG_CIFS_DFS_UPCALL=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m
+CONFIG_TIMER_STATS=y
+CONFIG_RCU_TORTURE_TEST=m
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+CONFIG_NOTIFIER_ERROR_INJECTION=m
+CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+CONFIG_PM_NOTIFIER_ERROR_INJECT=m
+CONFIG_LATENCYTOP=y
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_KPROBE_EVENT is not set
+CONFIG_LKDTM=m
+CONFIG_RBTREE_TEST=m
+CONFIG_INTERVAL_TREE_TEST=m
+CONFIG_ATOMIC64_SELFTEST=y
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_S390_PTDUMP=y
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_IMA=y
+CONFIG_IMA_APPRAISE=y
+CONFIG_CRYPTO_USER=m
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_CRC32=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ZLIB=y
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_LZ4=m
+CONFIG_CRYPTO_LZ4HC=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_ZCRYPT=m
+CONFIG_CRYPTO_SHA1_S390=m
+CONFIG_CRYPTO_SHA256_S390=m
+CONFIG_CRYPTO_SHA512_S390=m
+CONFIG_CRYPTO_DES_S390=m
+CONFIG_CRYPTO_AES_S390=m
+CONFIG_CRYPTO_GHASH_S390=m
+CONFIG_ASYMMETRIC_KEY_TYPE=m
+CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
+CONFIG_PUBLIC_KEY_ALGO_RSA=m
+CONFIG_X509_CERTIFICATE_PARSER=m
+CONFIG_CRC7=m
+CONFIG_CRC8=m
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_CORDIC=m
+CONFIG_CMM=m
+CONFIG_APPLDATA_BASE=y
+CONFIG_KVM=m
+CONFIG_KVM_S390_UCONTROL=y
diff --git a/arch/s390/configs/performance_defconfig b/arch/s390/configs/performance_defconfig
new file mode 100644
index 0000000..91087b4
--- /dev/null
+++ b/arch/s390/configs/performance_defconfig
@@ -0,0 +1,610 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_AUDIT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_RCU_FAST_NO_HZ=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_PERF=y
+CONFIG_BLK_CGROUP=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_KPROBES=y
+CONFIG_JUMP_LABEL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_BLK_DEV_THROTTLING=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_IBM_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_DEFAULT_DEADLINE=y
+CONFIG_MARCH_Z9_109=y
+CONFIG_HZ_100=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_KSM=y
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_PCI=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_S390=y
+CONFIG_CHSC_SCH=y
+CONFIG_CRASH_DUMP=y
+CONFIG_ZFCPDUMP=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_HIBERNATION=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=m
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_NET_IPVTI=m
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_GRE=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CONNTRACK_TIMEOUT=y
+CONFIG_NF_CONNTRACK_TIMESTAMP=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_PE_SIP=m
+CONFIG_NF_CONNTRACK_IPV4=m
+# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT_IPV4=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+CONFIG_NF_NAT_IPV6=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NET_SCTPPROBE=m
+CONFIG_RDS=m
+CONFIG_RDS_RDMA=m
+CONFIG_RDS_TCP=m
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_L2TP_V3=y
+CONFIG_L2TP_IP=m
+CONFIG_L2TP_ETH=m
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_CODEL=m
+CONFIG_NET_SCH_FQ_CODEL=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_PLUG=m
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+CONFIG_DNS_RESOLVER=y
+CONFIG_BPF_JIT=y
+CONFIG_NET_PKTGEN=m
+CONFIG_NET_TCPPROBE=m
+CONFIG_DEVTMPFS=y
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_OSD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_XIP=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_ATA_OVER_ETH=m
+CONFIG_VIRTIO_BLK=y
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_ISCSI_TCP=m
+CONFIG_LIBFCOE=m
+CONFIG_SCSI_DEBUG=m
+CONFIG_ZFCP=y
+CONFIG_SCSI_VIRTIO=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+CONFIG_DM_DELAY=m
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+CONFIG_DM_SWITCH=m
+CONFIG_NETDEVICES=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_EQUALIZER=m
+CONFIG_IFB=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_VXLAN=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_NLMON=m
+CONFIG_VHOST_NET=m
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+CONFIG_MLX4_EN=m
+# CONFIG_NET_VENDOR_NATSEMI is not set
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_LEGACY_PTY_COUNT=0
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_RAW_DRIVER=m
+CONFIG_HANGCHECK_TIMER=m
+CONFIG_TN3270_FS=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_ZVM_WATCHDOG=m
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_VIRTIO_BALLOON=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_JBD_DEBUG=y
+CONFIG_JBD2_DEBUG=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+CONFIG_JFS_STATISTICS=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_XFS_RT=y
+CONFIG_GFS2_FS=m
+CONFIG_OCFS2_FS=m
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
+CONFIG_FANOTIFY=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_FSCACHE=m
+CONFIG_CACHEFILES=m
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_NTFS_FS=m
+CONFIG_NTFS_RW=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_HUGETLBFS=y
+CONFIG_CONFIGFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_ROMFS_FS=m
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=m
+CONFIG_NFS_SWAP=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_V4_SECURITY_LABEL=y
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_UPCALL=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG is not set
+CONFIG_CIFS_DFS_UPCALL=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_TIMER_STATS=y
+CONFIG_RCU_TORTURE_TEST=m
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+CONFIG_LATENCYTOP=y
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_KPROBE_EVENT is not set
+CONFIG_LKDTM=m
+CONFIG_ATOMIC64_SELFTEST=y
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_S390_PTDUMP=y
+CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_IMA=y
+CONFIG_IMA_APPRAISE=y
+CONFIG_CRYPTO_USER=m
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_CRC32=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_ZLIB=y
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_LZ4=m
+CONFIG_CRYPTO_LZ4HC=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_ZCRYPT=m
+CONFIG_CRYPTO_SHA1_S390=m
+CONFIG_CRYPTO_SHA256_S390=m
+CONFIG_CRYPTO_SHA512_S390=m
+CONFIG_CRYPTO_DES_S390=m
+CONFIG_CRYPTO_AES_S390=m
+CONFIG_CRYPTO_GHASH_S390=m
+CONFIG_ASYMMETRIC_KEY_TYPE=m
+CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
+CONFIG_PUBLIC_KEY_ALGO_RSA=m
+CONFIG_X509_CERTIFICATE_PARSER=m
+CONFIG_CRC7=m
+CONFIG_CRC8=m
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_CORDIC=m
+CONFIG_CMM=m
+CONFIG_APPLDATA_BASE=y
+CONFIG_KVM=m
+CONFIG_KVM_S390_UCONTROL=y
diff --git a/arch/s390/configs/zfcpdump_defconfig b/arch/s390/configs/zfcpdump_defconfig
new file mode 100644
index 0000000..d725c4d
--- /dev/null
+++ b/arch/s390/configs/zfcpdump_defconfig
@@ -0,0 +1,86 @@
+# CONFIG_SWAP is not set
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_RCU_FAST_NO_HZ=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_IBM_PARTITION=y
+CONFIG_DEFAULT_DEADLINE=y
+CONFIG_MARCH_Z9_109=y
+# CONFIG_COMPAT is not set
+CONFIG_NR_CPUS=2
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_HZ_100=y
+# CONFIG_COMPACTION is not set
+# CONFIG_MIGRATION is not set
+# CONFIG_CHECK_STACK is not set
+# CONFIG_CHSC_SCH is not set
+# CONFIG_SCM_BUS is not set
+CONFIG_CRASH_DUMP=y
+CONFIG_ZFCPDUMP=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_IUCV is not set
+CONFIG_ATM=y
+CONFIG_ATM_LANE=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_BLK_DEV_XPRAM is not set
+# CONFIG_DCSSBLK is not set
+# CONFIG_DASD is not set
+CONFIG_ENCLOSURE_SERVICES=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_ENCLOSURE=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SRP_ATTRS=y
+CONFIG_ZFCP=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_HVC_IUCV is not set
+CONFIG_RAW_DRIVER=y
+# CONFIG_SCLP_ASYNC is not set
+# CONFIG_HMC_DRV is not set
+# CONFIG_S390_TAPE is not set
+# CONFIG_VMCP is not set
+# CONFIG_MONWRITER is not set
+# CONFIG_S390_VMUR is not set
+# CONFIG_HID is not set
+CONFIG_MEMSTICK=y
+CONFIG_MEMSTICK_DEBUG=y
+CONFIG_MEMSTICK_UNSAFE_RESUME=y
+CONFIG_MSPRO_BLOCK=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_INOTIFY_USER is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_FTRACE is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+# CONFIG_PFAULT is not set
+# CONFIG_S390_HYPFS_FS is not set
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_S390_GUEST is not set
diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c
index b4dbade..46cae13 100644
--- a/arch/s390/crypto/aes_s390.c
+++ b/arch/s390/crypto/aes_s390.c
@@ -725,6 +725,8 @@ static struct crypto_alg xts_aes_alg = {
 	}
 };
 
+static int xts_aes_alg_reg;
+
 static int ctr_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
 			   unsigned int key_len)
 {
@@ -846,6 +848,8 @@ static struct crypto_alg ctr_aes_alg = {
 	}
 };
 
+static int ctr_aes_alg_reg;
+
 static int __init aes_s390_init(void)
 {
 	int ret;
@@ -884,6 +888,7 @@ static int __init aes_s390_init(void)
 		ret = crypto_register_alg(&xts_aes_alg);
 		if (ret)
 			goto xts_aes_err;
+		xts_aes_alg_reg = 1;
 	}
 
 	if (crypt_s390_func_available(KMCTR_AES_128_ENCRYPT,
@@ -902,6 +907,7 @@ static int __init aes_s390_init(void)
 			free_page((unsigned long) ctrblk);
 			goto ctr_aes_err;
 		}
+		ctr_aes_alg_reg = 1;
 	}
 
 out:
@@ -921,9 +927,12 @@ aes_err:
 
 static void __exit aes_s390_fini(void)
 {
-	crypto_unregister_alg(&ctr_aes_alg);
-	free_page((unsigned long) ctrblk);
-	crypto_unregister_alg(&xts_aes_alg);
+	if (ctr_aes_alg_reg) {
+		crypto_unregister_alg(&ctr_aes_alg);
+		free_page((unsigned long) ctrblk);
+	}
+	if (xts_aes_alg_reg)
+		crypto_unregister_alg(&xts_aes_alg);
 	crypto_unregister_alg(&cbc_aes_alg);
 	crypto_unregister_alg(&ecb_aes_alg);
 	crypto_unregister_alg(&aes_alg);
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index b74400e..33f5751 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -1,14 +1,13 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_FHANDLE=y
+CONFIG_AUDIT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
 CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_AUDIT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_RCU_FAST_NO_HZ=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
@@ -27,6 +26,7 @@ CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
 CONFIG_RD_XZ=y
 CONFIG_RD_LZO=y
+CONFIG_RD_LZ4=y
 CONFIG_EXPERT=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
@@ -39,10 +39,13 @@ CONFIG_MODVERSIONS=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_IBM_PARTITION=y
 CONFIG_DEFAULT_DEADLINE=y
+CONFIG_MARCH_Z196=y
 CONFIG_HZ_100=y
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_KSM=y
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_CMA=y
 CONFIG_CRASH_DUMP=y
 CONFIG_BINFMT_MISC=m
 CONFIG_HIBERNATION=y
@@ -92,40 +95,49 @@ CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_ZFCP=y
+CONFIG_SCSI_VIRTIO=y
 CONFIG_NETDEVICES=y
 CONFIG_BONDING=m
 CONFIG_DUMMY=m
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
 CONFIG_VIRTIO_NET=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
 CONFIG_RAW_DRIVER=m
 CONFIG_VIRTIO_BALLOON=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
+CONFIG_XFS_FS=y
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_XFS_RT=y
+CONFIG_BTRFS_FS=y
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_FANOTIFY=y
+CONFIG_FUSE_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_HUGETLBFS=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_PAGEALLOC=y
 CONFIG_TIMER_STATS=y
 CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
 CONFIG_LOCK_STAT=y
 CONFIG_DEBUG_LOCKDEP=y
 CONFIG_DEBUG_LIST=y
 CONFIG_DEBUG_NOTIFIERS=y
+CONFIG_PROVE_RCU=y
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
 CONFIG_RCU_TRACE=y
-CONFIG_KPROBES_SANITY_TEST=y
-CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
 CONFIG_LATENCYTOP=y
-CONFIG_DEBUG_PAGEALLOC=y
 CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_KPROBES_SANITY_TEST=y
 # CONFIG_STRICT_DEVMEM is not set
-CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -137,8 +149,11 @@ CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_CRC32=m
+CONFIG_CRYPTO_CRCT10DIF=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD128=m
@@ -165,6 +180,8 @@ CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_LZ4=m
+CONFIG_CRYPTO_LZ4HC=m
 CONFIG_ZCRYPT=m
 CONFIG_CRYPTO_SHA1_S390=m
 CONFIG_CRYPTO_SHA256_S390=m
diff --git a/arch/s390/hypfs/hypfs.h b/arch/s390/hypfs/hypfs.h
index f41e0ef..79f2ac5 100644
--- a/arch/s390/hypfs/hypfs.h
+++ b/arch/s390/hypfs/hypfs.h
@@ -18,26 +18,23 @@
 #define UPDATE_FILE_MODE 0220
 #define DIR_MODE         0550
 
-extern struct dentry *hypfs_mkdir(struct super_block *sb, struct dentry *parent,
-				  const char *name);
+extern struct dentry *hypfs_mkdir(struct dentry *parent, const char *name);
 
-extern struct dentry *hypfs_create_u64(struct super_block *sb,
-				       struct dentry *dir, const char *name,
+extern struct dentry *hypfs_create_u64(struct dentry *dir, const char *name,
 				       __u64 value);
 
-extern struct dentry *hypfs_create_str(struct super_block *sb,
-				       struct dentry *dir, const char *name,
+extern struct dentry *hypfs_create_str(struct dentry *dir, const char *name,
 				       char *string);
 
 /* LPAR Hypervisor */
 extern int hypfs_diag_init(void);
 extern void hypfs_diag_exit(void);
-extern int hypfs_diag_create_files(struct super_block *sb, struct dentry *root);
+extern int hypfs_diag_create_files(struct dentry *root);
 
 /* VM Hypervisor */
 extern int hypfs_vm_init(void);
 extern void hypfs_vm_exit(void);
-extern int hypfs_vm_create_files(struct super_block *sb, struct dentry *root);
+extern int hypfs_vm_create_files(struct dentry *root);
 
 /* debugfs interface */
 struct hypfs_dbfs_file;
diff --git a/arch/s390/hypfs/hypfs_dbfs.c b/arch/s390/hypfs/hypfs_dbfs.c
index bb5dd49..17ab8b7 100644
--- a/arch/s390/hypfs/hypfs_dbfs.c
+++ b/arch/s390/hypfs/hypfs_dbfs.c
@@ -105,7 +105,7 @@ void hypfs_dbfs_remove_file(struct hypfs_dbfs_file *df)
 int hypfs_dbfs_init(void)
 {
 	dbfs_dir = debugfs_create_dir("s390_hypfs", NULL);
-	return PTR_RET(dbfs_dir);
+	return PTR_ERR_OR_ZERO(dbfs_dir);
 }
 
 void hypfs_dbfs_exit(void)
diff --git a/arch/s390/hypfs/hypfs_diag.c b/arch/s390/hypfs/hypfs_diag.c
index 138893e..5eeffee 100644
--- a/arch/s390/hypfs/hypfs_diag.c
+++ b/arch/s390/hypfs/hypfs_diag.c
@@ -623,8 +623,7 @@ void hypfs_diag_exit(void)
  * *******************************************
  */
 
-static int hypfs_create_cpu_files(struct super_block *sb,
-				  struct dentry *cpus_dir, void *cpu_info)
+static int hypfs_create_cpu_files(struct dentry *cpus_dir, void *cpu_info)
 {
 	struct dentry *cpu_dir;
 	char buffer[TMP_SIZE];
@@ -632,30 +631,29 @@ static int hypfs_create_cpu_files(struct super_block *sb,
 
 	snprintf(buffer, TMP_SIZE, "%d", cpu_info__cpu_addr(diag204_info_type,
 							    cpu_info));
-	cpu_dir = hypfs_mkdir(sb, cpus_dir, buffer);
-	rc = hypfs_create_u64(sb, cpu_dir, "mgmtime",
+	cpu_dir = hypfs_mkdir(cpus_dir, buffer);
+	rc = hypfs_create_u64(cpu_dir, "mgmtime",
 			      cpu_info__acc_time(diag204_info_type, cpu_info) -
 			      cpu_info__lp_time(diag204_info_type, cpu_info));
 	if (IS_ERR(rc))
 		return PTR_ERR(rc);
-	rc = hypfs_create_u64(sb, cpu_dir, "cputime",
+	rc = hypfs_create_u64(cpu_dir, "cputime",
 			      cpu_info__lp_time(diag204_info_type, cpu_info));
 	if (IS_ERR(rc))
 		return PTR_ERR(rc);
 	if (diag204_info_type == INFO_EXT) {
-		rc = hypfs_create_u64(sb, cpu_dir, "onlinetime",
+		rc = hypfs_create_u64(cpu_dir, "onlinetime",
 				      cpu_info__online_time(diag204_info_type,
 							    cpu_info));
 		if (IS_ERR(rc))
 			return PTR_ERR(rc);
 	}
 	diag224_idx2name(cpu_info__ctidx(diag204_info_type, cpu_info), buffer);
-	rc = hypfs_create_str(sb, cpu_dir, "type", buffer);
+	rc = hypfs_create_str(cpu_dir, "type", buffer);
 	return PTR_RET(rc);
 }
 
-static void *hypfs_create_lpar_files(struct super_block *sb,
-				     struct dentry *systems_dir, void *part_hdr)
+static void *hypfs_create_lpar_files(struct dentry *systems_dir, void *part_hdr)
 {
 	struct dentry *cpus_dir;
 	struct dentry *lpar_dir;
@@ -665,16 +663,16 @@ static void *hypfs_create_lpar_files(struct super_block *sb,
 
 	part_hdr__part_name(diag204_info_type, part_hdr, lpar_name);
 	lpar_name[LPAR_NAME_LEN] = 0;
-	lpar_dir = hypfs_mkdir(sb, systems_dir, lpar_name);
+	lpar_dir = hypfs_mkdir(systems_dir, lpar_name);
 	if (IS_ERR(lpar_dir))
 		return lpar_dir;
-	cpus_dir = hypfs_mkdir(sb, lpar_dir, "cpus");
+	cpus_dir = hypfs_mkdir(lpar_dir, "cpus");
 	if (IS_ERR(cpus_dir))
 		return cpus_dir;
 	cpu_info = part_hdr + part_hdr__size(diag204_info_type);
 	for (i = 0; i < part_hdr__rcpus(diag204_info_type, part_hdr); i++) {
 		int rc;
-		rc = hypfs_create_cpu_files(sb, cpus_dir, cpu_info);
+		rc = hypfs_create_cpu_files(cpus_dir, cpu_info);
 		if (rc)
 			return ERR_PTR(rc);
 		cpu_info += cpu_info__size(diag204_info_type);
@@ -682,8 +680,7 @@ static void *hypfs_create_lpar_files(struct super_block *sb,
 	return cpu_info;
 }
 
-static int hypfs_create_phys_cpu_files(struct super_block *sb,
-				       struct dentry *cpus_dir, void *cpu_info)
+static int hypfs_create_phys_cpu_files(struct dentry *cpus_dir, void *cpu_info)
 {
 	struct dentry *cpu_dir;
 	char buffer[TMP_SIZE];
@@ -691,32 +688,31 @@ static int hypfs_create_phys_cpu_files(struct super_block *sb,
 
 	snprintf(buffer, TMP_SIZE, "%i", phys_cpu__cpu_addr(diag204_info_type,
 							    cpu_info));
-	cpu_dir = hypfs_mkdir(sb, cpus_dir, buffer);
+	cpu_dir = hypfs_mkdir(cpus_dir, buffer);
 	if (IS_ERR(cpu_dir))
 		return PTR_ERR(cpu_dir);
-	rc = hypfs_create_u64(sb, cpu_dir, "mgmtime",
+	rc = hypfs_create_u64(cpu_dir, "mgmtime",
 			      phys_cpu__mgm_time(diag204_info_type, cpu_info));
 	if (IS_ERR(rc))
 		return PTR_ERR(rc);
 	diag224_idx2name(phys_cpu__ctidx(diag204_info_type, cpu_info), buffer);
-	rc = hypfs_create_str(sb, cpu_dir, "type", buffer);
+	rc = hypfs_create_str(cpu_dir, "type", buffer);
 	return PTR_RET(rc);
 }
 
-static void *hypfs_create_phys_files(struct super_block *sb,
-				     struct dentry *parent_dir, void *phys_hdr)
+static void *hypfs_create_phys_files(struct dentry *parent_dir, void *phys_hdr)
 {
 	int i;
 	void *cpu_info;
 	struct dentry *cpus_dir;
 
-	cpus_dir = hypfs_mkdir(sb, parent_dir, "cpus");
+	cpus_dir = hypfs_mkdir(parent_dir, "cpus");
 	if (IS_ERR(cpus_dir))
 		return cpus_dir;
 	cpu_info = phys_hdr + phys_hdr__size(diag204_info_type);
 	for (i = 0; i < phys_hdr__cpus(diag204_info_type, phys_hdr); i++) {
 		int rc;
-		rc = hypfs_create_phys_cpu_files(sb, cpus_dir, cpu_info);
+		rc = hypfs_create_phys_cpu_files(cpus_dir, cpu_info);
 		if (rc)
 			return ERR_PTR(rc);
 		cpu_info += phys_cpu__size(diag204_info_type);
@@ -724,7 +720,7 @@ static void *hypfs_create_phys_files(struct super_block *sb,
 	return cpu_info;
 }
 
-int hypfs_diag_create_files(struct super_block *sb, struct dentry *root)
+int hypfs_diag_create_files(struct dentry *root)
 {
 	struct dentry *systems_dir, *hyp_dir;
 	void *time_hdr, *part_hdr;
@@ -735,7 +731,7 @@ int hypfs_diag_create_files(struct super_block *sb, struct dentry *root)
 	if (IS_ERR(buffer))
 		return PTR_ERR(buffer);
 
-	systems_dir = hypfs_mkdir(sb, root, "systems");
+	systems_dir = hypfs_mkdir(root, "systems");
 	if (IS_ERR(systems_dir)) {
 		rc = PTR_ERR(systems_dir);
 		goto err_out;
@@ -743,25 +739,25 @@ int hypfs_diag_create_files(struct super_block *sb, struct dentry *root)
 	time_hdr = (struct x_info_blk_hdr *)buffer;
 	part_hdr = time_hdr + info_blk_hdr__size(diag204_info_type);
 	for (i = 0; i < info_blk_hdr__npar(diag204_info_type, time_hdr); i++) {
-		part_hdr = hypfs_create_lpar_files(sb, systems_dir, part_hdr);
+		part_hdr = hypfs_create_lpar_files(systems_dir, part_hdr);
 		if (IS_ERR(part_hdr)) {
 			rc = PTR_ERR(part_hdr);
 			goto err_out;
 		}
 	}
 	if (info_blk_hdr__flags(diag204_info_type, time_hdr) & LPAR_PHYS_FLG) {
-		ptr = hypfs_create_phys_files(sb, root, part_hdr);
+		ptr = hypfs_create_phys_files(root, part_hdr);
 		if (IS_ERR(ptr)) {
 			rc = PTR_ERR(ptr);
 			goto err_out;
 		}
 	}
-	hyp_dir = hypfs_mkdir(sb, root, "hyp");
+	hyp_dir = hypfs_mkdir(root, "hyp");
 	if (IS_ERR(hyp_dir)) {
 		rc = PTR_ERR(hyp_dir);
 		goto err_out;
 	}
-	ptr = hypfs_create_str(sb, hyp_dir, "type", "LPAR Hypervisor");
+	ptr = hypfs_create_str(hyp_dir, "type", "LPAR Hypervisor");
 	if (IS_ERR(ptr)) {
 		rc = PTR_ERR(ptr);
 		goto err_out;
diff --git a/arch/s390/hypfs/hypfs_vm.c b/arch/s390/hypfs/hypfs_vm.c
index f364dcf..24908ce 100644
--- a/arch/s390/hypfs/hypfs_vm.c
+++ b/arch/s390/hypfs/hypfs_vm.c
@@ -107,16 +107,15 @@ static void diag2fc_free(const void *data)
 	vfree(data);
 }
 
-#define ATTRIBUTE(sb, dir, name, member) \
+#define ATTRIBUTE(dir, name, member) \
 do { \
 	void *rc; \
-	rc = hypfs_create_u64(sb, dir, name, member); \
+	rc = hypfs_create_u64(dir, name, member); \
 	if (IS_ERR(rc)) \
 		return PTR_ERR(rc); \
 } while(0)
 
-static int hpyfs_vm_create_guest(struct super_block *sb,
-				 struct dentry *systems_dir,
+static int hpyfs_vm_create_guest(struct dentry *systems_dir,
 				 struct diag2fc_data *data)
 {
 	char guest_name[NAME_LEN + 1] = {};
@@ -130,46 +129,46 @@ static int hpyfs_vm_create_guest(struct super_block *sb,
 	memcpy(guest_name, data->guest_name, NAME_LEN);
 	EBCASC(guest_name, NAME_LEN);
 	strim(guest_name);
-	guest_dir = hypfs_mkdir(sb, systems_dir, guest_name);
+	guest_dir = hypfs_mkdir(systems_dir, guest_name);
 	if (IS_ERR(guest_dir))
 		return PTR_ERR(guest_dir);
-	ATTRIBUTE(sb, guest_dir, "onlinetime_us", data->el_time);
+	ATTRIBUTE(guest_dir, "onlinetime_us", data->el_time);
 
 	/* logical cpu information */
-	cpus_dir = hypfs_mkdir(sb, guest_dir, "cpus");
+	cpus_dir = hypfs_mkdir(guest_dir, "cpus");
 	if (IS_ERR(cpus_dir))
 		return PTR_ERR(cpus_dir);
-	ATTRIBUTE(sb, cpus_dir, "cputime_us", data->used_cpu);
-	ATTRIBUTE(sb, cpus_dir, "capped", capped_value);
-	ATTRIBUTE(sb, cpus_dir, "dedicated", dedicated_flag);
-	ATTRIBUTE(sb, cpus_dir, "count", data->vcpus);
-	ATTRIBUTE(sb, cpus_dir, "weight_min", data->cpu_min);
-	ATTRIBUTE(sb, cpus_dir, "weight_max", data->cpu_max);
-	ATTRIBUTE(sb, cpus_dir, "weight_cur", data->cpu_shares);
+	ATTRIBUTE(cpus_dir, "cputime_us", data->used_cpu);
+	ATTRIBUTE(cpus_dir, "capped", capped_value);
+	ATTRIBUTE(cpus_dir, "dedicated", dedicated_flag);
+	ATTRIBUTE(cpus_dir, "count", data->vcpus);
+	ATTRIBUTE(cpus_dir, "weight_min", data->cpu_min);
+	ATTRIBUTE(cpus_dir, "weight_max", data->cpu_max);
+	ATTRIBUTE(cpus_dir, "weight_cur", data->cpu_shares);
 
 	/* memory information */
-	mem_dir = hypfs_mkdir(sb, guest_dir, "mem");
+	mem_dir = hypfs_mkdir(guest_dir, "mem");
 	if (IS_ERR(mem_dir))
 		return PTR_ERR(mem_dir);
-	ATTRIBUTE(sb, mem_dir, "min_KiB", data->mem_min_kb);
-	ATTRIBUTE(sb, mem_dir, "max_KiB", data->mem_max_kb);
-	ATTRIBUTE(sb, mem_dir, "used_KiB", data->mem_used_kb);
-	ATTRIBUTE(sb, mem_dir, "share_KiB", data->mem_share_kb);
+	ATTRIBUTE(mem_dir, "min_KiB", data->mem_min_kb);
+	ATTRIBUTE(mem_dir, "max_KiB", data->mem_max_kb);
+	ATTRIBUTE(mem_dir, "used_KiB", data->mem_used_kb);
+	ATTRIBUTE(mem_dir, "share_KiB", data->mem_share_kb);
 
 	/* samples */
-	samples_dir = hypfs_mkdir(sb, guest_dir, "samples");
+	samples_dir = hypfs_mkdir(guest_dir, "samples");
 	if (IS_ERR(samples_dir))
 		return PTR_ERR(samples_dir);
-	ATTRIBUTE(sb, samples_dir, "cpu_using", data->cpu_use_samp);
-	ATTRIBUTE(sb, samples_dir, "cpu_delay", data->cpu_delay_samp);
-	ATTRIBUTE(sb, samples_dir, "mem_delay", data->page_wait_samp);
-	ATTRIBUTE(sb, samples_dir, "idle", data->idle_samp);
-	ATTRIBUTE(sb, samples_dir, "other", data->other_samp);
-	ATTRIBUTE(sb, samples_dir, "total", data->total_samp);
+	ATTRIBUTE(samples_dir, "cpu_using", data->cpu_use_samp);
+	ATTRIBUTE(samples_dir, "cpu_delay", data->cpu_delay_samp);
+	ATTRIBUTE(samples_dir, "mem_delay", data->page_wait_samp);
+	ATTRIBUTE(samples_dir, "idle", data->idle_samp);
+	ATTRIBUTE(samples_dir, "other", data->other_samp);
+	ATTRIBUTE(samples_dir, "total", data->total_samp);
 	return 0;
 }
 
-int hypfs_vm_create_files(struct super_block *sb, struct dentry *root)
+int hypfs_vm_create_files(struct dentry *root)
 {
 	struct dentry *dir, *file;
 	struct diag2fc_data *data;
@@ -181,38 +180,38 @@ int hypfs_vm_create_files(struct super_block *sb, struct dentry *root)
 		return PTR_ERR(data);
 
 	/* Hpervisor Info */
-	dir = hypfs_mkdir(sb, root, "hyp");
+	dir = hypfs_mkdir(root, "hyp");
 	if (IS_ERR(dir)) {
 		rc = PTR_ERR(dir);
 		goto failed;
 	}
-	file = hypfs_create_str(sb, dir, "type", "z/VM Hypervisor");
+	file = hypfs_create_str(dir, "type", "z/VM Hypervisor");
 	if (IS_ERR(file)) {
 		rc = PTR_ERR(file);
 		goto failed;
 	}
 
 	/* physical cpus */
-	dir = hypfs_mkdir(sb, root, "cpus");
+	dir = hypfs_mkdir(root, "cpus");
 	if (IS_ERR(dir)) {
 		rc = PTR_ERR(dir);
 		goto failed;
 	}
-	file = hypfs_create_u64(sb, dir, "count", data->lcpus);
+	file = hypfs_create_u64(dir, "count", data->lcpus);
 	if (IS_ERR(file)) {
 		rc = PTR_ERR(file);
 		goto failed;
 	}
 
 	/* guests */
-	dir = hypfs_mkdir(sb, root, "systems");
+	dir = hypfs_mkdir(root, "systems");
 	if (IS_ERR(dir)) {
 		rc = PTR_ERR(dir);
 		goto failed;
 	}
 
 	for (i = 0; i < count; i++) {
-		rc = hpyfs_vm_create_guest(sb, dir, &(data[i]));
+		rc = hpyfs_vm_create_guest(dir, &(data[i]));
 		if (rc)
 			goto failed;
 	}
diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c
index 7a539f4..ddfe09b 100644
--- a/arch/s390/hypfs/inode.c
+++ b/arch/s390/hypfs/inode.c
@@ -28,8 +28,7 @@
 #define HYPFS_MAGIC 0x687970	/* ASCII 'hyp' */
 #define TMP_SIZE 64		/* size of temporary buffers */
 
-static struct dentry *hypfs_create_update_file(struct super_block *sb,
-					       struct dentry *dir);
+static struct dentry *hypfs_create_update_file(struct dentry *dir);
 
 struct hypfs_sb_info {
 	kuid_t uid;			/* uid used for files and dirs */
@@ -193,9 +192,9 @@ static ssize_t hypfs_aio_write(struct kiocb *iocb, const struct iovec *iov,
 	}
 	hypfs_delete_tree(sb->s_root);
 	if (MACHINE_IS_VM)
-		rc = hypfs_vm_create_files(sb, sb->s_root);
+		rc = hypfs_vm_create_files(sb->s_root);
 	else
-		rc = hypfs_diag_create_files(sb, sb->s_root);
+		rc = hypfs_diag_create_files(sb->s_root);
 	if (rc) {
 		pr_err("Updating the hypfs tree failed\n");
 		hypfs_delete_tree(sb->s_root);
@@ -302,12 +301,12 @@ static int hypfs_fill_super(struct super_block *sb, void *data, int silent)
 	if (!root_dentry)
 		return -ENOMEM;
 	if (MACHINE_IS_VM)
-		rc = hypfs_vm_create_files(sb, root_dentry);
+		rc = hypfs_vm_create_files(root_dentry);
 	else
-		rc = hypfs_diag_create_files(sb, root_dentry);
+		rc = hypfs_diag_create_files(root_dentry);
 	if (rc)
 		return rc;
-	sbi->update_file = hypfs_create_update_file(sb, root_dentry);
+	sbi->update_file = hypfs_create_update_file(root_dentry);
 	if (IS_ERR(sbi->update_file))
 		return PTR_ERR(sbi->update_file);
 	hypfs_update_update(sb);
@@ -334,8 +333,7 @@ static void hypfs_kill_super(struct super_block *sb)
 	kill_litter_super(sb);
 }
 
-static struct dentry *hypfs_create_file(struct super_block *sb,
-					struct dentry *parent, const char *name,
+static struct dentry *hypfs_create_file(struct dentry *parent, const char *name,
 					char *data, umode_t mode)
 {
 	struct dentry *dentry;
@@ -347,7 +345,7 @@ static struct dentry *hypfs_create_file(struct super_block *sb,
 		dentry = ERR_PTR(-ENOMEM);
 		goto fail;
 	}
-	inode = hypfs_make_inode(sb, mode);
+	inode = hypfs_make_inode(parent->d_sb, mode);
 	if (!inode) {
 		dput(dentry);
 		dentry = ERR_PTR(-ENOMEM);
@@ -373,24 +371,22 @@ fail:
 	return dentry;
 }
 
-struct dentry *hypfs_mkdir(struct super_block *sb, struct dentry *parent,
-			   const char *name)
+struct dentry *hypfs_mkdir(struct dentry *parent, const char *name)
 {
 	struct dentry *dentry;
 
-	dentry = hypfs_create_file(sb, parent, name, NULL, S_IFDIR | DIR_MODE);
+	dentry = hypfs_create_file(parent, name, NULL, S_IFDIR | DIR_MODE);
 	if (IS_ERR(dentry))
 		return dentry;
 	hypfs_add_dentry(dentry);
 	return dentry;
 }
 
-static struct dentry *hypfs_create_update_file(struct super_block *sb,
-					       struct dentry *dir)
+static struct dentry *hypfs_create_update_file(struct dentry *dir)
 {
 	struct dentry *dentry;
 
-	dentry = hypfs_create_file(sb, dir, "update", NULL,
+	dentry = hypfs_create_file(dir, "update", NULL,
 				   S_IFREG | UPDATE_FILE_MODE);
 	/*
 	 * We do not put the update file on the 'delete' list with
@@ -400,7 +396,7 @@ static struct dentry *hypfs_create_update_file(struct super_block *sb,
 	return dentry;
 }
 
-struct dentry *hypfs_create_u64(struct super_block *sb, struct dentry *dir,
+struct dentry *hypfs_create_u64(struct dentry *dir,
 				const char *name, __u64 value)
 {
 	char *buffer;
@@ -412,7 +408,7 @@ struct dentry *hypfs_create_u64(struct super_block *sb, struct dentry *dir,
 	if (!buffer)
 		return ERR_PTR(-ENOMEM);
 	dentry =
-	    hypfs_create_file(sb, dir, name, buffer, S_IFREG | REG_FILE_MODE);
+	    hypfs_create_file(dir, name, buffer, S_IFREG | REG_FILE_MODE);
 	if (IS_ERR(dentry)) {
 		kfree(buffer);
 		return ERR_PTR(-ENOMEM);
@@ -421,7 +417,7 @@ struct dentry *hypfs_create_u64(struct super_block *sb, struct dentry *dir,
 	return dentry;
 }
 
-struct dentry *hypfs_create_str(struct super_block *sb, struct dentry *dir,
+struct dentry *hypfs_create_str(struct dentry *dir,
 				const char *name, char *string)
 {
 	char *buffer;
@@ -432,7 +428,7 @@ struct dentry *hypfs_create_str(struct super_block *sb, struct dentry *dir,
 		return ERR_PTR(-ENOMEM);
 	sprintf(buffer, "%s\n", string);
 	dentry =
-	    hypfs_create_file(sb, dir, name, buffer, S_IFREG | REG_FILE_MODE);
+	    hypfs_create_file(dir, name, buffer, S_IFREG | REG_FILE_MODE);
 	if (IS_ERR(dentry)) {
 		kfree(buffer);
 		return ERR_PTR(-ENOMEM);
diff --git a/arch/s390/include/asm/airq.h b/arch/s390/include/asm/airq.h
index 4066cee..4bbb595 100644
--- a/arch/s390/include/asm/airq.h
+++ b/arch/s390/include/asm/airq.h
@@ -9,6 +9,8 @@
 #ifndef _ASM_S390_AIRQ_H
 #define _ASM_S390_AIRQ_H
 
+#include <linux/bit_spinlock.h>
+
 struct airq_struct {
 	struct hlist_node list;		/* Handler queueing. */
 	void (*handler)(struct airq_struct *);	/* Thin-interrupt handler */
@@ -23,4 +25,69 @@ struct airq_struct {
 int register_adapter_interrupt(struct airq_struct *airq);
 void unregister_adapter_interrupt(struct airq_struct *airq);
 
+/* Adapter interrupt bit vector */
+struct airq_iv {
+	unsigned long *vector;	/* Adapter interrupt bit vector */
+	unsigned long *avail;	/* Allocation bit mask for the bit vector */
+	unsigned long *bitlock;	/* Lock bit mask for the bit vector */
+	unsigned long *ptr;	/* Pointer associated with each bit */
+	unsigned int *data;	/* 32 bit value associated with each bit */
+	unsigned long bits;	/* Number of bits in the vector */
+	unsigned long end;	/* Number of highest allocated bit + 1 */
+	spinlock_t lock;	/* Lock to protect alloc & free */
+};
+
+#define AIRQ_IV_ALLOC	1	/* Use an allocation bit mask */
+#define AIRQ_IV_BITLOCK	2	/* Allocate the lock bit mask */
+#define AIRQ_IV_PTR	4	/* Allocate the ptr array */
+#define AIRQ_IV_DATA	8	/* Allocate the data array */
+
+struct airq_iv *airq_iv_create(unsigned long bits, unsigned long flags);
+void airq_iv_release(struct airq_iv *iv);
+unsigned long airq_iv_alloc_bit(struct airq_iv *iv);
+void airq_iv_free_bit(struct airq_iv *iv, unsigned long bit);
+unsigned long airq_iv_scan(struct airq_iv *iv, unsigned long start,
+			   unsigned long end);
+
+static inline unsigned long airq_iv_end(struct airq_iv *iv)
+{
+	return iv->end;
+}
+
+static inline void airq_iv_lock(struct airq_iv *iv, unsigned long bit)
+{
+	const unsigned long be_to_le = BITS_PER_LONG - 1;
+	bit_spin_lock(bit ^ be_to_le, iv->bitlock);
+}
+
+static inline void airq_iv_unlock(struct airq_iv *iv, unsigned long bit)
+{
+	const unsigned long be_to_le = BITS_PER_LONG - 1;
+	bit_spin_unlock(bit ^ be_to_le, iv->bitlock);
+}
+
+static inline void airq_iv_set_data(struct airq_iv *iv, unsigned long bit,
+				    unsigned int data)
+{
+	iv->data[bit] = data;
+}
+
+static inline unsigned int airq_iv_get_data(struct airq_iv *iv,
+					    unsigned long bit)
+{
+	return iv->data[bit];
+}
+
+static inline void airq_iv_set_ptr(struct airq_iv *iv, unsigned long bit,
+				   unsigned long ptr)
+{
+	iv->ptr[bit] = ptr;
+}
+
+static inline unsigned long airq_iv_get_ptr(struct airq_iv *iv,
+					    unsigned long bit)
+{
+	return iv->ptr[bit];
+}
+
 #endif /* _ASM_S390_AIRQ_H */
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index c797832..fa9aaf7 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -19,21 +19,50 @@
 
 #define ATOMIC_INIT(i)  { (i) }
 
-#define __CS_LOOP(ptr, op_val, op_string) ({				\
+#ifdef CONFIG_HAVE_MARCH_Z196_FEATURES
+
+#define __ATOMIC_OR	"lao"
+#define __ATOMIC_AND	"lan"
+#define __ATOMIC_ADD	"laa"
+
+#define __ATOMIC_LOOP(ptr, op_val, op_string)				\
+({									\
+	int old_val;							\
+									\
+	typecheck(atomic_t *, ptr);					\
+	asm volatile(							\
+		op_string "	%0,%2,%1\n"				\
+		: "=d" (old_val), "+Q" ((ptr)->counter)			\
+		: "d" (op_val)						\
+		: "cc", "memory");					\
+	old_val;							\
+})
+
+#else /* CONFIG_HAVE_MARCH_Z196_FEATURES */
+
+#define __ATOMIC_OR	"or"
+#define __ATOMIC_AND	"nr"
+#define __ATOMIC_ADD	"ar"
+
+#define __ATOMIC_LOOP(ptr, op_val, op_string)				\
+({									\
 	int old_val, new_val;						\
+									\
+	typecheck(atomic_t *, ptr);					\
 	asm volatile(							\
 		"	l	%0,%2\n"				\
 		"0:	lr	%1,%0\n"				\
 		op_string "	%1,%3\n"				\
 		"	cs	%0,%1,%2\n"				\
 		"	jl	0b"					\
-		: "=&d" (old_val), "=&d" (new_val),			\
-		  "=Q" (((atomic_t *)(ptr))->counter)			\
-		: "d" (op_val),	 "Q" (((atomic_t *)(ptr))->counter)	\
+		: "=&d" (old_val), "=&d" (new_val), "+Q" ((ptr)->counter)\
+		: "d" (op_val)						\
 		: "cc", "memory");					\
-	new_val;							\
+	old_val;							\
 })
 
+#endif /* CONFIG_HAVE_MARCH_Z196_FEATURES */
+
 static inline int atomic_read(const atomic_t *v)
 {
 	int c;
@@ -53,32 +82,45 @@ static inline void atomic_set(atomic_t *v, int i)
 
 static inline int atomic_add_return(int i, atomic_t *v)
 {
-	return __CS_LOOP(v, i, "ar");
+	return __ATOMIC_LOOP(v, i, __ATOMIC_ADD) + i;
 }
-#define atomic_add(_i, _v)		atomic_add_return(_i, _v)
-#define atomic_add_negative(_i, _v)	(atomic_add_return(_i, _v) < 0)
-#define atomic_inc(_v)			atomic_add_return(1, _v)
-#define atomic_inc_return(_v)		atomic_add_return(1, _v)
-#define atomic_inc_and_test(_v)		(atomic_add_return(1, _v) == 0)
 
-static inline int atomic_sub_return(int i, atomic_t *v)
+static inline void atomic_add(int i, atomic_t *v)
 {
-	return __CS_LOOP(v, i, "sr");
+#ifdef CONFIG_HAVE_MARCH_Z196_FEATURES
+	if (__builtin_constant_p(i) && (i > -129) && (i < 128)) {
+		asm volatile(
+			"asi	%0,%1\n"
+			: "+Q" (v->counter)
+			: "i" (i)
+			: "cc", "memory");
+	} else {
+		atomic_add_return(i, v);
+	}
+#else
+	atomic_add_return(i, v);
+#endif
 }
-#define atomic_sub(_i, _v)		atomic_sub_return(_i, _v)
+
+#define atomic_add_negative(_i, _v)	(atomic_add_return(_i, _v) < 0)
+#define atomic_inc(_v)			atomic_add(1, _v)
+#define atomic_inc_return(_v)		atomic_add_return(1, _v)
+#define atomic_inc_and_test(_v)		(atomic_add_return(1, _v) == 0)
+#define atomic_sub(_i, _v)		atomic_add(-(int)(_i), _v)
+#define atomic_sub_return(_i, _v)	atomic_add_return(-(int)(_i), _v)
 #define atomic_sub_and_test(_i, _v)	(atomic_sub_return(_i, _v) == 0)
-#define atomic_dec(_v)			atomic_sub_return(1, _v)
+#define atomic_dec(_v)			atomic_sub(1, _v)
 #define atomic_dec_return(_v)		atomic_sub_return(1, _v)
 #define atomic_dec_and_test(_v)		(atomic_sub_return(1, _v) == 0)
 
-static inline void atomic_clear_mask(unsigned long mask, atomic_t *v)
+static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
 {
-	__CS_LOOP(v, ~mask, "nr");
+	__ATOMIC_LOOP(v, ~mask, __ATOMIC_AND);
 }
 
-static inline void atomic_set_mask(unsigned long mask, atomic_t *v)
+static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
 {
-	__CS_LOOP(v, mask, "or");
+	__ATOMIC_LOOP(v, mask, __ATOMIC_OR);
 }
 
 #define atomic_xchg(v, new) (xchg(&((v)->counter), new))
@@ -87,8 +129,8 @@ static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
 {
 	asm volatile(
 		"	cs	%0,%2,%1"
-		: "+d" (old), "=Q" (v->counter)
-		: "d" (new), "Q" (v->counter)
+		: "+d" (old), "+Q" (v->counter)
+		: "d" (new)
 		: "cc", "memory");
 	return old;
 }
@@ -109,27 +151,56 @@ static inline int __atomic_add_unless(atomic_t *v, int a, int u)
 }
 
 
-#undef __CS_LOOP
+#undef __ATOMIC_LOOP
 
 #define ATOMIC64_INIT(i)  { (i) }
 
 #ifdef CONFIG_64BIT
 
-#define __CSG_LOOP(ptr, op_val, op_string) ({				\
+#ifdef CONFIG_HAVE_MARCH_Z196_FEATURES
+
+#define __ATOMIC64_OR	"laog"
+#define __ATOMIC64_AND	"lang"
+#define __ATOMIC64_ADD	"laag"
+
+#define __ATOMIC64_LOOP(ptr, op_val, op_string)				\
+({									\
+	long long old_val;						\
+									\
+	typecheck(atomic64_t *, ptr);					\
+	asm volatile(							\
+		op_string "	%0,%2,%1\n"				\
+		: "=d" (old_val), "+Q" ((ptr)->counter)			\
+		: "d" (op_val)						\
+		: "cc", "memory");					\
+	old_val;							\
+})
+
+#else /* CONFIG_HAVE_MARCH_Z196_FEATURES */
+
+#define __ATOMIC64_OR	"ogr"
+#define __ATOMIC64_AND	"ngr"
+#define __ATOMIC64_ADD	"agr"
+
+#define __ATOMIC64_LOOP(ptr, op_val, op_string)				\
+({									\
 	long long old_val, new_val;					\
+									\
+	typecheck(atomic64_t *, ptr);					\
 	asm volatile(							\
 		"	lg	%0,%2\n"				\
 		"0:	lgr	%1,%0\n"				\
 		op_string "	%1,%3\n"				\
 		"	csg	%0,%1,%2\n"				\
 		"	jl	0b"					\
-		: "=&d" (old_val), "=&d" (new_val),			\
-		  "=Q" (((atomic_t *)(ptr))->counter)			\
-		: "d" (op_val),	"Q" (((atomic_t *)(ptr))->counter)	\
+		: "=&d" (old_val), "=&d" (new_val), "+Q" ((ptr)->counter)\
+		: "d" (op_val)						\
 		: "cc", "memory");					\
-	new_val;							\
+	old_val;							\
 })
 
+#endif /* CONFIG_HAVE_MARCH_Z196_FEATURES */
+
 static inline long long atomic64_read(const atomic64_t *v)
 {
 	long long c;
@@ -149,22 +220,17 @@ static inline void atomic64_set(atomic64_t *v, long long i)
 
 static inline long long atomic64_add_return(long long i, atomic64_t *v)
 {
-	return __CSG_LOOP(v, i, "agr");
-}
-
-static inline long long atomic64_sub_return(long long i, atomic64_t *v)
-{
-	return __CSG_LOOP(v, i, "sgr");
+	return __ATOMIC64_LOOP(v, i, __ATOMIC64_ADD) + i;
 }
 
 static inline void atomic64_clear_mask(unsigned long mask, atomic64_t *v)
 {
-	__CSG_LOOP(v, ~mask, "ngr");
+	__ATOMIC64_LOOP(v, ~mask, __ATOMIC64_AND);
 }
 
 static inline void atomic64_set_mask(unsigned long mask, atomic64_t *v)
 {
-	__CSG_LOOP(v, mask, "ogr");
+	__ATOMIC64_LOOP(v, mask, __ATOMIC64_OR);
 }
 
 #define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
@@ -174,13 +240,13 @@ static inline long long atomic64_cmpxchg(atomic64_t *v,
 {
 	asm volatile(
 		"	csg	%0,%2,%1"
-		: "+d" (old), "=Q" (v->counter)
-		: "d" (new), "Q" (v->counter)
+		: "+d" (old), "+Q" (v->counter)
+		: "d" (new)
 		: "cc", "memory");
 	return old;
 }
 
-#undef __CSG_LOOP
+#undef __ATOMIC64_LOOP
 
 #else /* CONFIG_64BIT */
 
@@ -216,8 +282,8 @@ static inline long long atomic64_xchg(atomic64_t *v, long long new)
 		"	lm	%0,%N0,%1\n"
 		"0:	cds	%0,%2,%1\n"
 		"	jl	0b\n"
-		: "=&d" (rp_old), "=Q" (v->counter)
-		: "d" (rp_new), "Q" (v->counter)
+		: "=&d" (rp_old), "+Q" (v->counter)
+		: "d" (rp_new)
 		: "cc");
 	return rp_old.pair;
 }
@@ -230,8 +296,8 @@ static inline long long atomic64_cmpxchg(atomic64_t *v,
 
 	asm volatile(
 		"	cds	%0,%2,%1"
-		: "+&d" (rp_old), "=Q" (v->counter)
-		: "d" (rp_new), "Q" (v->counter)
+		: "+&d" (rp_old), "+Q" (v->counter)
+		: "d" (rp_new)
 		: "cc");
 	return rp_old.pair;
 }
@@ -248,17 +314,6 @@ static inline long long atomic64_add_return(long long i, atomic64_t *v)
 	return new;
 }
 
-static inline long long atomic64_sub_return(long long i, atomic64_t *v)
-{
-	long long old, new;
-
-	do {
-		old = atomic64_read(v);
-		new = old - i;
-	} while (atomic64_cmpxchg(v, old, new) != old);
-	return new;
-}
-
 static inline void atomic64_set_mask(unsigned long long mask, atomic64_t *v)
 {
 	long long old, new;
@@ -281,7 +336,24 @@ static inline void atomic64_clear_mask(unsigned long long mask, atomic64_t *v)
 
 #endif /* CONFIG_64BIT */
 
-static inline int atomic64_add_unless(atomic64_t *v, long long a, long long u)
+static inline void atomic64_add(long long i, atomic64_t *v)
+{
+#ifdef CONFIG_HAVE_MARCH_Z196_FEATURES
+	if (__builtin_constant_p(i) && (i > -129) && (i < 128)) {
+		asm volatile(
+			"agsi	%0,%1\n"
+			: "+Q" (v->counter)
+			: "i" (i)
+			: "cc", "memory");
+	} else {
+		atomic64_add_return(i, v);
+	}
+#else
+	atomic64_add_return(i, v);
+#endif
+}
+
+static inline int atomic64_add_unless(atomic64_t *v, long long i, long long u)
 {
 	long long c, old;
 
@@ -289,7 +361,7 @@ static inline int atomic64_add_unless(atomic64_t *v, long long a, long long u)
 	for (;;) {
 		if (unlikely(c == u))
 			break;
-		old = atomic64_cmpxchg(v, c, c + a);
+		old = atomic64_cmpxchg(v, c, c + i);
 		if (likely(old == c))
 			break;
 		c = old;
@@ -314,14 +386,14 @@ static inline long long atomic64_dec_if_positive(atomic64_t *v)
 	return dec;
 }
 
-#define atomic64_add(_i, _v)		atomic64_add_return(_i, _v)
 #define atomic64_add_negative(_i, _v)	(atomic64_add_return(_i, _v) < 0)
-#define atomic64_inc(_v)		atomic64_add_return(1, _v)
+#define atomic64_inc(_v)		atomic64_add(1, _v)
 #define atomic64_inc_return(_v)		atomic64_add_return(1, _v)
 #define atomic64_inc_and_test(_v)	(atomic64_add_return(1, _v) == 0)
-#define atomic64_sub(_i, _v)		atomic64_sub_return(_i, _v)
+#define atomic64_sub_return(_i, _v)	atomic64_add_return(-(long long)(_i), _v)
+#define atomic64_sub(_i, _v)		atomic64_add(-(long long)(_i), _v)
 #define atomic64_sub_and_test(_i, _v)	(atomic64_sub_return(_i, _v) == 0)
-#define atomic64_dec(_v)		atomic64_sub_return(1, _v)
+#define atomic64_dec(_v)		atomic64_sub(1, _v)
 #define atomic64_dec_return(_v)		atomic64_sub_return(1, _v)
 #define atomic64_dec_and_test(_v)	(atomic64_sub_return(1, _v) == 0)
 #define atomic64_inc_not_zero(v)	atomic64_add_unless((v), 1, 0)
diff --git a/arch/s390/include/asm/bitops.h b/arch/s390/include/asm/bitops.h
index 7d46767..6e6ad06 100644
--- a/arch/s390/include/asm/bitops.h
+++ b/arch/s390/include/asm/bitops.h
@@ -1,10 +1,40 @@
 /*
- *  S390 version
- *    Copyright IBM Corp. 1999
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *    Copyright IBM Corp. 1999,2013
  *
- *  Derived from "include/asm-i386/bitops.h"
- *    Copyright (C) 1992, Linus Torvalds
+ *    Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>,
+ *
+ * The description below was taken in large parts from the powerpc
+ * bitops header file:
+ * Within a word, bits are numbered LSB first.  Lot's of places make
+ * this assumption by directly testing bits with (val & (1<<nr)).
+ * This can cause confusion for large (> 1 word) bitmaps on a
+ * big-endian system because, unlike little endian, the number of each
+ * bit depends on the word size.
+ *
+ * The bitop functions are defined to work on unsigned longs, so for an
+ * s390x system the bits end up numbered:
+ *   |63..............0|127............64|191...........128|255...........196|
+ * and on s390:
+ *   |31.....0|63....31|95....64|127...96|159..128|191..160|223..192|255..224|
+ *
+ * There are a few little-endian macros used mostly for filesystem
+ * bitmaps, these work on similar bit arrays layouts, but
+ * byte-oriented:
+ *   |7...0|15...8|23...16|31...24|39...32|47...40|55...48|63...56|
+ *
+ * The main difference is that bit 3-5 (64b) or 3-4 (32b) in the bit
+ * number field needs to be reversed compared to the big-endian bit
+ * fields. This can be achieved by XOR with 0x38 (64b) or 0x18 (32b).
+ *
+ * We also have special functions which work with an MSB0 encoding:
+ * on an s390x system the bits are numbered:
+ *   |0..............63|64............127|128...........191|192...........255|
+ * and on s390:
+ *   |0.....31|31....63|64....95|96...127|128..159|160..191|192..223|224..255|
+ *
+ * The main difference is that bit 0-63 (64b) or 0-31 (32b) in the bit
+ * number field needs to be reversed compared to the LSB0 encoded bit
+ * fields. This can be achieved by XOR with 0x3f (64b) or 0x1f (32b).
  *
  */
 
@@ -15,556 +45,348 @@
 #error only <linux/bitops.h> can be included directly
 #endif
 
+#include <linux/typecheck.h>
 #include <linux/compiler.h>
 
-/*
- * 32 bit bitops format:
- * bit 0 is the LSB of *addr; bit 31 is the MSB of *addr;
- * bit 32 is the LSB of *(addr+4). That combined with the
- * big endian byte order on S390 give the following bit
- * order in memory:
- *    1f 1e 1d 1c 1b 1a 19 18 17 16 15 14 13 12 11 10 \
- *    0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00
- * after that follows the next long with bit numbers
- *    3f 3e 3d 3c 3b 3a 39 38 37 36 35 34 33 32 31 30
- *    2f 2e 2d 2c 2b 2a 29 28 27 26 25 24 23 22 21 20
- * The reason for this bit ordering is the fact that
- * in the architecture independent code bits operations
- * of the form "flags |= (1 << bitnr)" are used INTERMIXED
- * with operation of the form "set_bit(bitnr, flags)".
- *
- * 64 bit bitops format:
- * bit 0 is the LSB of *addr; bit 63 is the MSB of *addr;
- * bit 64 is the LSB of *(addr+8). That combined with the
- * big endian byte order on S390 give the following bit
- * order in memory:
- *    3f 3e 3d 3c 3b 3a 39 38 37 36 35 34 33 32 31 30
- *    2f 2e 2d 2c 2b 2a 29 28 27 26 25 24 23 22 21 20
- *    1f 1e 1d 1c 1b 1a 19 18 17 16 15 14 13 12 11 10
- *    0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00
- * after that follows the next long with bit numbers
- *    7f 7e 7d 7c 7b 7a 79 78 77 76 75 74 73 72 71 70
- *    6f 6e 6d 6c 6b 6a 69 68 67 66 65 64 63 62 61 60
- *    5f 5e 5d 5c 5b 5a 59 58 57 56 55 54 53 52 51 50
- *    4f 4e 4d 4c 4b 4a 49 48 47 46 45 44 43 42 41 40
- * The reason for this bit ordering is the fact that
- * in the architecture independent code bits operations
- * of the form "flags |= (1 << bitnr)" are used INTERMIXED
- * with operation of the form "set_bit(bitnr, flags)".
- */
-
-/* bitmap tables from arch/s390/kernel/bitmap.c */
-extern const char _oi_bitmap[];
-extern const char _ni_bitmap[];
-extern const char _zb_findmap[];
-extern const char _sb_findmap[];
-
 #ifndef CONFIG_64BIT
 
 #define __BITOPS_OR		"or"
 #define __BITOPS_AND		"nr"
 #define __BITOPS_XOR		"xr"
 
-#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
+#define __BITOPS_LOOP(__addr, __val, __op_string)		\
+({								\
+	unsigned long __old, __new;				\
+								\
+	typecheck(unsigned long *, (__addr));			\
 	asm volatile(						\
 		"	l	%0,%2\n"			\
 		"0:	lr	%1,%0\n"			\
 		__op_string "	%1,%3\n"			\
 		"	cs	%0,%1,%2\n"			\
 		"	jl	0b"				\
-		: "=&d" (__old), "=&d" (__new),			\
-		  "=Q" (*(unsigned long *) __addr)		\
-		: "d" (__val), "Q" (*(unsigned long *) __addr)	\
-		: "cc");
+		: "=&d" (__old), "=&d" (__new), "+Q" (*(__addr))\
+		: "d" (__val)					\
+		: "cc");					\
+	__old;							\
+})
 
 #else /* CONFIG_64BIT */
 
+#ifdef CONFIG_HAVE_MARCH_Z196_FEATURES
+
+#define __BITOPS_OR		"laog"
+#define __BITOPS_AND		"lang"
+#define __BITOPS_XOR		"laxg"
+
+#define __BITOPS_LOOP(__addr, __val, __op_string)		\
+({								\
+	unsigned long __old;					\
+								\
+	typecheck(unsigned long *, (__addr));			\
+	asm volatile(						\
+		__op_string "	%0,%2,%1\n"			\
+		: "=d" (__old),	"+Q" (*(__addr))		\
+		: "d" (__val)					\
+		: "cc");					\
+	__old;							\
+})
+
+#else /* CONFIG_HAVE_MARCH_Z196_FEATURES */
+
 #define __BITOPS_OR		"ogr"
 #define __BITOPS_AND		"ngr"
 #define __BITOPS_XOR		"xgr"
 
-#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
+#define __BITOPS_LOOP(__addr, __val, __op_string)		\
+({								\
+	unsigned long __old, __new;				\
+								\
+	typecheck(unsigned long *, (__addr));			\
 	asm volatile(						\
 		"	lg	%0,%2\n"			\
 		"0:	lgr	%1,%0\n"			\
 		__op_string "	%1,%3\n"			\
 		"	csg	%0,%1,%2\n"			\
 		"	jl	0b"				\
-		: "=&d" (__old), "=&d" (__new),			\
-		  "=Q" (*(unsigned long *) __addr)		\
-		: "d" (__val), "Q" (*(unsigned long *) __addr)	\
-		: "cc");
+		: "=&d" (__old), "=&d" (__new), "+Q" (*(__addr))\
+		: "d" (__val)					\
+		: "cc");					\
+	__old;							\
+})
+
+#endif /* CONFIG_HAVE_MARCH_Z196_FEATURES */
 
 #endif /* CONFIG_64BIT */
 
 #define __BITOPS_WORDS(bits) (((bits) + BITS_PER_LONG - 1) / BITS_PER_LONG)
 
-#ifdef CONFIG_SMP
-/*
- * SMP safe set_bit routine based on compare and swap (CS)
- */
-static inline void set_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+static inline unsigned long *
+__bitops_word(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+
+	addr = (unsigned long)ptr + ((nr ^ (nr & (BITS_PER_LONG - 1))) >> 3);
+	return (unsigned long *)addr;
+}
+
+static inline unsigned char *
+__bitops_byte(unsigned long nr, volatile unsigned long *ptr)
 {
-        unsigned long addr, old, new, mask;
+	return ((unsigned char *)ptr) + ((nr ^ (BITS_PER_LONG - 8)) >> 3);
+}
+
+static inline void set_bit(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long *addr = __bitops_word(nr, ptr);
+	unsigned long mask;
 
-	addr = (unsigned long) ptr;
-	/* calculate address for CS */
-	addr += (nr ^ (nr & (BITS_PER_LONG - 1))) >> 3;
-	/* make OR mask */
+#ifdef CONFIG_HAVE_MARCH_ZEC12_FEATURES
+	if (__builtin_constant_p(nr)) {
+		unsigned char *caddr = __bitops_byte(nr, ptr);
+
+		asm volatile(
+			"oi	%0,%b1\n"
+			: "+Q" (*caddr)
+			: "i" (1 << (nr & 7))
+			: "cc");
+		return;
+	}
+#endif
 	mask = 1UL << (nr & (BITS_PER_LONG - 1));
-	/* Do the atomic update. */
-	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_OR);
+	__BITOPS_LOOP(addr, mask, __BITOPS_OR);
 }
 
-/*
- * SMP safe clear_bit routine based on compare and swap (CS)
- */
-static inline void clear_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+static inline void clear_bit(unsigned long nr, volatile unsigned long *ptr)
 {
-        unsigned long addr, old, new, mask;
+	unsigned long *addr = __bitops_word(nr, ptr);
+	unsigned long mask;
+
+#ifdef CONFIG_HAVE_MARCH_ZEC12_FEATURES
+	if (__builtin_constant_p(nr)) {
+		unsigned char *caddr = __bitops_byte(nr, ptr);
 
-	addr = (unsigned long) ptr;
-	/* calculate address for CS */
-	addr += (nr ^ (nr & (BITS_PER_LONG - 1))) >> 3;
-	/* make AND mask */
+		asm volatile(
+			"ni	%0,%b1\n"
+			: "+Q" (*caddr)
+			: "i" (~(1 << (nr & 7)))
+			: "cc");
+		return;
+	}
+#endif
 	mask = ~(1UL << (nr & (BITS_PER_LONG - 1)));
-	/* Do the atomic update. */
-	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_AND);
+	__BITOPS_LOOP(addr, mask, __BITOPS_AND);
 }
 
-/*
- * SMP safe change_bit routine based on compare and swap (CS)
- */
-static inline void change_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+static inline void change_bit(unsigned long nr, volatile unsigned long *ptr)
 {
-        unsigned long addr, old, new, mask;
+	unsigned long *addr = __bitops_word(nr, ptr);
+	unsigned long mask;
+
+#ifdef CONFIG_HAVE_MARCH_ZEC12_FEATURES
+	if (__builtin_constant_p(nr)) {
+		unsigned char *caddr = __bitops_byte(nr, ptr);
 
-	addr = (unsigned long) ptr;
-	/* calculate address for CS */
-	addr += (nr ^ (nr & (BITS_PER_LONG - 1))) >> 3;
-	/* make XOR mask */
+		asm volatile(
+			"xi	%0,%b1\n"
+			: "+Q" (*caddr)
+			: "i" (1 << (nr & 7))
+			: "cc");
+		return;
+	}
+#endif
 	mask = 1UL << (nr & (BITS_PER_LONG - 1));
-	/* Do the atomic update. */
-	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_XOR);
+	__BITOPS_LOOP(addr, mask, __BITOPS_XOR);
 }
 
-/*
- * SMP safe test_and_set_bit routine based on compare and swap (CS)
- */
 static inline int
-test_and_set_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+test_and_set_bit(unsigned long nr, volatile unsigned long *ptr)
 {
-        unsigned long addr, old, new, mask;
+	unsigned long *addr = __bitops_word(nr, ptr);
+	unsigned long old, mask;
 
-	addr = (unsigned long) ptr;
-	/* calculate address for CS */
-	addr += (nr ^ (nr & (BITS_PER_LONG - 1))) >> 3;
-	/* make OR/test mask */
 	mask = 1UL << (nr & (BITS_PER_LONG - 1));
-	/* Do the atomic update. */
-	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_OR);
+	old = __BITOPS_LOOP(addr, mask, __BITOPS_OR);
 	barrier();
 	return (old & mask) != 0;
 }
 
-/*
- * SMP safe test_and_clear_bit routine based on compare and swap (CS)
- */
 static inline int
-test_and_clear_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+test_and_clear_bit(unsigned long nr, volatile unsigned long *ptr)
 {
-        unsigned long addr, old, new, mask;
+	unsigned long *addr = __bitops_word(nr, ptr);
+	unsigned long old, mask;
 
-	addr = (unsigned long) ptr;
-	/* calculate address for CS */
-	addr += (nr ^ (nr & (BITS_PER_LONG - 1))) >> 3;
-	/* make AND/test mask */
 	mask = ~(1UL << (nr & (BITS_PER_LONG - 1)));
-	/* Do the atomic update. */
-	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_AND);
+	old = __BITOPS_LOOP(addr, mask, __BITOPS_AND);
 	barrier();
-	return (old ^ new) != 0;
+	return (old & ~mask) != 0;
 }
 
-/*
- * SMP safe test_and_change_bit routine based on compare and swap (CS) 
- */
 static inline int
-test_and_change_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+test_and_change_bit(unsigned long nr, volatile unsigned long *ptr)
 {
-        unsigned long addr, old, new, mask;
+	unsigned long *addr = __bitops_word(nr, ptr);
+	unsigned long old, mask;
 
-	addr = (unsigned long) ptr;
-	/* calculate address for CS */
-	addr += (nr ^ (nr & (BITS_PER_LONG - 1))) >> 3;
-	/* make XOR/test mask */
 	mask = 1UL << (nr & (BITS_PER_LONG - 1));
-	/* Do the atomic update. */
-	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_XOR);
+	old = __BITOPS_LOOP(addr, mask, __BITOPS_XOR);
 	barrier();
 	return (old & mask) != 0;
 }
-#endif /* CONFIG_SMP */
 
-/*
- * fast, non-SMP set_bit routine
- */
 static inline void __set_bit(unsigned long nr, volatile unsigned long *ptr)
 {
-	unsigned long addr;
-
-	addr = (unsigned long) ptr + ((nr ^ (BITS_PER_LONG - 8)) >> 3);
-	asm volatile(
-		"	oc	%O0(1,%R0),%1"
-		: "=Q" (*(char *) addr) : "Q" (_oi_bitmap[nr & 7]) : "cc" );
-}
-
-static inline void 
-__constant_set_bit(const unsigned long nr, volatile unsigned long *ptr)
-{
-	unsigned long addr;
+	unsigned char *addr = __bitops_byte(nr, ptr);
 
-	addr = ((unsigned long) ptr) + ((nr ^ (BITS_PER_LONG - 8)) >> 3);
-	*(unsigned char *) addr |= 1 << (nr & 7);
+	*addr |= 1 << (nr & 7);
 }
 
-#define set_bit_simple(nr,addr) \
-(__builtin_constant_p((nr)) ? \
- __constant_set_bit((nr),(addr)) : \
- __set_bit((nr),(addr)) )
-
-/*
- * fast, non-SMP clear_bit routine
- */
 static inline void 
 __clear_bit(unsigned long nr, volatile unsigned long *ptr)
 {
-	unsigned long addr;
-
-	addr = (unsigned long) ptr + ((nr ^ (BITS_PER_LONG - 8)) >> 3);
-	asm volatile(
-		"	nc	%O0(1,%R0),%1"
-		: "=Q" (*(char *) addr) : "Q" (_ni_bitmap[nr & 7]) : "cc" );
-}
-
-static inline void 
-__constant_clear_bit(const unsigned long nr, volatile unsigned long *ptr)
-{
-	unsigned long addr;
+	unsigned char *addr = __bitops_byte(nr, ptr);
 
-	addr = ((unsigned long) ptr) + ((nr ^ (BITS_PER_LONG - 8)) >> 3);
-	*(unsigned char *) addr &= ~(1 << (nr & 7));
+	*addr &= ~(1 << (nr & 7));
 }
 
-#define clear_bit_simple(nr,addr) \
-(__builtin_constant_p((nr)) ? \
- __constant_clear_bit((nr),(addr)) : \
- __clear_bit((nr),(addr)) )
-
-/* 
- * fast, non-SMP change_bit routine 
- */
 static inline void __change_bit(unsigned long nr, volatile unsigned long *ptr)
 {
-	unsigned long addr;
-
-	addr = (unsigned long) ptr + ((nr ^ (BITS_PER_LONG - 8)) >> 3);
-	asm volatile(
-		"	xc	%O0(1,%R0),%1"
-		: "=Q" (*(char *) addr) : "Q" (_oi_bitmap[nr & 7]) : "cc" );
-}
-
-static inline void 
-__constant_change_bit(const unsigned long nr, volatile unsigned long *ptr) 
-{
-	unsigned long addr;
+	unsigned char *addr = __bitops_byte(nr, ptr);
 
-	addr = ((unsigned long) ptr) + ((nr ^ (BITS_PER_LONG - 8)) >> 3);
-	*(unsigned char *) addr ^= 1 << (nr & 7);
+	*addr ^= 1 << (nr & 7);
 }
 
-#define change_bit_simple(nr,addr) \
-(__builtin_constant_p((nr)) ? \
- __constant_change_bit((nr),(addr)) : \
- __change_bit((nr),(addr)) )
-
-/*
- * fast, non-SMP test_and_set_bit routine
- */
 static inline int
-test_and_set_bit_simple(unsigned long nr, volatile unsigned long *ptr)
+__test_and_set_bit(unsigned long nr, volatile unsigned long *ptr)
 {
-	unsigned long addr;
+	unsigned char *addr = __bitops_byte(nr, ptr);
 	unsigned char ch;
 
-	addr = (unsigned long) ptr + ((nr ^ (BITS_PER_LONG - 8)) >> 3);
-	ch = *(unsigned char *) addr;
-	asm volatile(
-		"	oc	%O0(1,%R0),%1"
-		: "=Q" (*(char *) addr)	: "Q" (_oi_bitmap[nr & 7])
-		: "cc", "memory");
+	ch = *addr;
+	*addr |= 1 << (nr & 7);
 	return (ch >> (nr & 7)) & 1;
 }
-#define __test_and_set_bit(X,Y)		test_and_set_bit_simple(X,Y)
 
-/*
- * fast, non-SMP test_and_clear_bit routine
- */
 static inline int
-test_and_clear_bit_simple(unsigned long nr, volatile unsigned long *ptr)
+__test_and_clear_bit(unsigned long nr, volatile unsigned long *ptr)
 {
-	unsigned long addr;
+	unsigned char *addr = __bitops_byte(nr, ptr);
 	unsigned char ch;
 
-	addr = (unsigned long) ptr + ((nr ^ (BITS_PER_LONG - 8)) >> 3);
-	ch = *(unsigned char *) addr;
-	asm volatile(
-		"	nc	%O0(1,%R0),%1"
-		: "=Q" (*(char *) addr)	: "Q" (_ni_bitmap[nr & 7])
-		: "cc", "memory");
+	ch = *addr;
+	*addr &= ~(1 << (nr & 7));
 	return (ch >> (nr & 7)) & 1;
 }
-#define __test_and_clear_bit(X,Y)	test_and_clear_bit_simple(X,Y)
 
-/*
- * fast, non-SMP test_and_change_bit routine
- */
 static inline int
-test_and_change_bit_simple(unsigned long nr, volatile unsigned long *ptr)
+__test_and_change_bit(unsigned long nr, volatile unsigned long *ptr)
 {
-	unsigned long addr;
+	unsigned char *addr = __bitops_byte(nr, ptr);
 	unsigned char ch;
 
-	addr = (unsigned long) ptr + ((nr ^ (BITS_PER_LONG - 8)) >> 3);
-	ch = *(unsigned char *) addr;
-	asm volatile(
-		"	xc	%O0(1,%R0),%1"
-		: "=Q" (*(char *) addr)	: "Q" (_oi_bitmap[nr & 7])
-		: "cc", "memory");
+	ch = *addr;
+	*addr ^= 1 << (nr & 7);
 	return (ch >> (nr & 7)) & 1;
 }
-#define __test_and_change_bit(X,Y)	test_and_change_bit_simple(X,Y)
-
-#ifdef CONFIG_SMP
-#define set_bit             set_bit_cs
-#define clear_bit           clear_bit_cs
-#define change_bit          change_bit_cs
-#define test_and_set_bit    test_and_set_bit_cs
-#define test_and_clear_bit  test_and_clear_bit_cs
-#define test_and_change_bit test_and_change_bit_cs
-#else
-#define set_bit             set_bit_simple
-#define clear_bit           clear_bit_simple
-#define change_bit          change_bit_simple
-#define test_and_set_bit    test_and_set_bit_simple
-#define test_and_clear_bit  test_and_clear_bit_simple
-#define test_and_change_bit test_and_change_bit_simple
-#endif
-
-
-/*
- * This routine doesn't need to be atomic.
- */
 
-static inline int __test_bit(unsigned long nr, const volatile unsigned long *ptr)
+static inline int test_bit(unsigned long nr, const volatile unsigned long *ptr)
 {
-	unsigned long addr;
-	unsigned char ch;
-
-	addr = (unsigned long) ptr + ((nr ^ (BITS_PER_LONG - 8)) >> 3);
-	ch = *(volatile unsigned char *) addr;
-	return (ch >> (nr & 7)) & 1;
-}
+	const volatile unsigned char *addr;
 
-static inline int 
-__constant_test_bit(unsigned long nr, const volatile unsigned long *addr) {
-    return (((volatile char *) addr)
-	    [(nr^(BITS_PER_LONG-8))>>3] & (1<<(nr&7))) != 0;
+	addr = ((const volatile unsigned char *)ptr);
+	addr += (nr ^ (BITS_PER_LONG - 8)) >> 3;
+	return (*addr >> (nr & 7)) & 1;
 }
 
-#define test_bit(nr,addr) \
-(__builtin_constant_p((nr)) ? \
- __constant_test_bit((nr),(addr)) : \
- __test_bit((nr),(addr)) )
-
 /*
- * Optimized find bit helper functions.
- */
-
-/**
- * __ffz_word_loop - find byte offset of first long != -1UL
- * @addr: pointer to array of unsigned long
- * @size: size of the array in bits
+ * Functions which use MSB0 bit numbering.
+ * On an s390x system the bits are numbered:
+ *   |0..............63|64............127|128...........191|192...........255|
+ * and on s390:
+ *   |0.....31|31....63|64....95|96...127|128..159|160..191|192..223|224..255|
  */
-static inline unsigned long __ffz_word_loop(const unsigned long *addr,
-					    unsigned long size)
-{
-	typedef struct { long _[__BITOPS_WORDS(size)]; } addrtype;
-	unsigned long bytes = 0;
-
-	asm volatile(
-#ifndef CONFIG_64BIT
-		"	ahi	%1,-1\n"
-		"	sra	%1,5\n"
-		"	jz	1f\n"
-		"0:	c	%2,0(%0,%3)\n"
-		"	jne	1f\n"
-		"	la	%0,4(%0)\n"
-		"	brct	%1,0b\n"
-		"1:\n"
-#else
-		"	aghi	%1,-1\n"
-		"	srag	%1,%1,6\n"
-		"	jz	1f\n"
-		"0:	cg	%2,0(%0,%3)\n"
-		"	jne	1f\n"
-		"	la	%0,8(%0)\n"
-		"	brct	%1,0b\n"
-		"1:\n"
-#endif
-		: "+&a" (bytes), "+&d" (size)
-		: "d" (-1UL), "a" (addr), "m" (*(addrtype *) addr)
-		: "cc" );
-	return bytes;
-}
+unsigned long find_first_bit_inv(const unsigned long *addr, unsigned long size);
+unsigned long find_next_bit_inv(const unsigned long *addr, unsigned long size,
+				unsigned long offset);
 
-/**
- * __ffs_word_loop - find byte offset of first long != 0UL
- * @addr: pointer to array of unsigned long
- * @size: size of the array in bits
- */
-static inline unsigned long __ffs_word_loop(const unsigned long *addr,
-					    unsigned long size)
+static inline void set_bit_inv(unsigned long nr, volatile unsigned long *ptr)
 {
-	typedef struct { long _[__BITOPS_WORDS(size)]; } addrtype;
-	unsigned long bytes = 0;
-
-	asm volatile(
-#ifndef CONFIG_64BIT
-		"	ahi	%1,-1\n"
-		"	sra	%1,5\n"
-		"	jz	1f\n"
-		"0:	c	%2,0(%0,%3)\n"
-		"	jne	1f\n"
-		"	la	%0,4(%0)\n"
-		"	brct	%1,0b\n"
-		"1:\n"
-#else
-		"	aghi	%1,-1\n"
-		"	srag	%1,%1,6\n"
-		"	jz	1f\n"
-		"0:	cg	%2,0(%0,%3)\n"
-		"	jne	1f\n"
-		"	la	%0,8(%0)\n"
-		"	brct	%1,0b\n"
-		"1:\n"
-#endif
-		: "+&a" (bytes), "+&a" (size)
-		: "d" (0UL), "a" (addr), "m" (*(addrtype *) addr)
-		: "cc" );
-	return bytes;
+	return set_bit(nr ^ (BITS_PER_LONG - 1), ptr);
 }
 
-/**
- * __ffz_word - add number of the first unset bit
- * @nr: base value the bit number is added to
- * @word: the word that is searched for unset bits
- */
-static inline unsigned long __ffz_word(unsigned long nr, unsigned long word)
+static inline void clear_bit_inv(unsigned long nr, volatile unsigned long *ptr)
 {
-#ifdef CONFIG_64BIT
-	if ((word & 0xffffffff) == 0xffffffff) {
-		word >>= 32;
-		nr += 32;
-	}
-#endif
-	if ((word & 0xffff) == 0xffff) {
-		word >>= 16;
-		nr += 16;
-	}
-	if ((word & 0xff) == 0xff) {
-		word >>= 8;
-		nr += 8;
-	}
-	return nr + _zb_findmap[(unsigned char) word];
+	return clear_bit(nr ^ (BITS_PER_LONG - 1), ptr);
 }
 
-/**
- * __ffs_word - add number of the first set bit
- * @nr: base value the bit number is added to
- * @word: the word that is searched for set bits
- */
-static inline unsigned long __ffs_word(unsigned long nr, unsigned long word)
+static inline void __set_bit_inv(unsigned long nr, volatile unsigned long *ptr)
 {
-#ifdef CONFIG_64BIT
-	if ((word & 0xffffffff) == 0) {
-		word >>= 32;
-		nr += 32;
-	}
-#endif
-	if ((word & 0xffff) == 0) {
-		word >>= 16;
-		nr += 16;
-	}
-	if ((word & 0xff) == 0) {
-		word >>= 8;
-		nr += 8;
-	}
-	return nr + _sb_findmap[(unsigned char) word];
+	return __set_bit(nr ^ (BITS_PER_LONG - 1), ptr);
 }
 
-
-/**
- * __load_ulong_be - load big endian unsigned long
- * @p: pointer to array of unsigned long
- * @offset: byte offset of source value in the array
- */
-static inline unsigned long __load_ulong_be(const unsigned long *p,
-					    unsigned long offset)
+static inline void __clear_bit_inv(unsigned long nr, volatile unsigned long *ptr)
 {
-	p = (unsigned long *)((unsigned long) p + offset);
-	return *p;
+	return __clear_bit(nr ^ (BITS_PER_LONG - 1), ptr);
 }
 
-/**
- * __load_ulong_le - load little endian unsigned long
- * @p: pointer to array of unsigned long
- * @offset: byte offset of source value in the array
- */
-static inline unsigned long __load_ulong_le(const unsigned long *p,
-					    unsigned long offset)
+static inline int test_bit_inv(unsigned long nr,
+			       const volatile unsigned long *ptr)
 {
-	unsigned long word;
-
-	p = (unsigned long *)((unsigned long) p + offset);
-#ifndef CONFIG_64BIT
-	asm volatile(
-		"	ic	%0,%O1(%R1)\n"
-		"	icm	%0,2,%O1+1(%R1)\n"
-		"	icm	%0,4,%O1+2(%R1)\n"
-		"	icm	%0,8,%O1+3(%R1)"
-		: "=&d" (word) : "Q" (*p) : "cc");
-#else
-	asm volatile(
-		"	lrvg	%0,%1"
-		: "=d" (word) : "m" (*p) );
-#endif
-	return word;
+	return test_bit(nr ^ (BITS_PER_LONG - 1), ptr);
 }
 
-/*
- * The various find bit functions.
- */
+#ifdef CONFIG_HAVE_MARCH_Z9_109_FEATURES
 
-/*
- * ffz - find first zero in word.
- * @word: The word to search
+/**
+ * __flogr - find leftmost one
+ * @word - The word to search
  *
- * Undefined if no zero exists, so code should check against ~0UL first.
- */
-static inline unsigned long ffz(unsigned long word)
-{
-	return __ffz_word(0, word);
+ * Returns the bit number of the most significant bit set,
+ * where the most significant bit has bit number 0.
+ * If no bit is set this function returns 64.
+ */
+static inline unsigned char __flogr(unsigned long word)
+{
+	if (__builtin_constant_p(word)) {
+		unsigned long bit = 0;
+
+		if (!word)
+			return 64;
+		if (!(word & 0xffffffff00000000UL)) {
+			word <<= 32;
+			bit += 32;
+		}
+		if (!(word & 0xffff000000000000UL)) {
+			word <<= 16;
+			bit += 16;
+		}
+		if (!(word & 0xff00000000000000UL)) {
+			word <<= 8;
+			bit += 8;
+		}
+		if (!(word & 0xf000000000000000UL)) {
+			word <<= 4;
+			bit += 4;
+		}
+		if (!(word & 0xc000000000000000UL)) {
+			word <<= 2;
+			bit += 2;
+		}
+		if (!(word & 0x8000000000000000UL)) {
+			word <<= 1;
+			bit += 1;
+		}
+		return bit;
+	} else {
+		register unsigned long bit asm("4") = word;
+		register unsigned long out asm("5");
+
+		asm volatile(
+			"       flogr   %[bit],%[bit]\n"
+			: [bit] "+d" (bit), [out] "=d" (out) : : "cc");
+		return bit;
+	}
 }
 
 /**
@@ -573,337 +395,83 @@ static inline unsigned long ffz(unsigned long word)
  *
  * Undefined if no bit exists, so code should check against 0 first.
  */
-static inline unsigned long __ffs (unsigned long word)
+static inline unsigned long __ffs(unsigned long word)
 {
-	return __ffs_word(0, word);
+	return __flogr(-word & word) ^ (BITS_PER_LONG - 1);
 }
 
 /**
  * ffs - find first bit set
- * @x: the word to search
+ * @word: the word to search
  *
- * This is defined the same way as
- * the libc and compiler builtin ffs routines, therefore
- * differs in spirit from the above ffz (man ffs).
+ * This is defined the same way as the libc and
+ * compiler builtin ffs routines (man ffs).
  */
-static inline int ffs(int x)
+static inline int ffs(int word)
 {
-	if (!x)
-		return 0;
-	return __ffs_word(1, x);
+	unsigned long mask = 2 * BITS_PER_LONG - 1;
+	unsigned int val = (unsigned int)word;
+
+	return (1 + (__flogr(-val & val) ^ (BITS_PER_LONG - 1))) & mask;
 }
 
 /**
- * find_first_zero_bit - find the first zero bit in a memory region
- * @addr: The address to start the search at
- * @size: The maximum size to search
+ * __fls - find last (most-significant) set bit in a long word
+ * @word: the word to search
  *
- * Returns the bit-number of the first zero bit, not the number of the byte
- * containing a bit.
+ * Undefined if no set bit exists, so code should check against 0 first.
  */
-static inline unsigned long find_first_zero_bit(const unsigned long *addr,
-						unsigned long size)
+static inline unsigned long __fls(unsigned long word)
 {
-	unsigned long bytes, bits;
-
-        if (!size)
-                return 0;
-	bytes = __ffz_word_loop(addr, size);
-	bits = __ffz_word(bytes*8, __load_ulong_be(addr, bytes));
-	return (bits < size) ? bits : size;
+	return __flogr(word) ^ (BITS_PER_LONG - 1);
 }
-#define find_first_zero_bit find_first_zero_bit
 
 /**
- * find_first_bit - find the first set bit in a memory region
- * @addr: The address to start the search at
- * @size: The maximum size to search
+ * fls64 - find last set bit in a 64-bit word
+ * @word: the word to search
  *
- * Returns the bit-number of the first set bit, not the number of the byte
- * containing a bit.
- */
-static inline unsigned long find_first_bit(const unsigned long * addr,
-					   unsigned long size)
-{
-	unsigned long bytes, bits;
-
-        if (!size)
-                return 0;
-	bytes = __ffs_word_loop(addr, size);
-	bits = __ffs_word(bytes*8, __load_ulong_be(addr, bytes));
-	return (bits < size) ? bits : size;
-}
-#define find_first_bit find_first_bit
-
-/*
- * Big endian variant whichs starts bit counting from left using
- * the flogr (find leftmost one) instruction.
- */
-static inline unsigned long __flo_word(unsigned long nr, unsigned long val)
-{
-	register unsigned long bit asm("2") = val;
-	register unsigned long out asm("3");
-
-	asm volatile (
-		"	.insn	rre,0xb9830000,%[bit],%[bit]\n"
-		: [bit] "+d" (bit), [out] "=d" (out) : : "cc");
-	return nr + bit;
-}
-
-/*
- * 64 bit special left bitops format:
- * order in memory:
- *    00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
- *    10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f
- *    20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
- *    30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f
- * after that follows the next long with bit numbers
- *    40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f
- *    50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f
- *    60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f
- *    70 71 72 73 74 75 76 77 78 79 7a 7b 7c 7d 7e 7f
- * The reason for this bit ordering is the fact that
- * the hardware sets bits in a bitmap starting at bit 0
- * and we don't want to scan the bitmap from the 'wrong
- * end'.
+ * This is defined in a similar way as the libc and compiler builtin
+ * ffsll, but returns the position of the most significant set bit.
+ *
+ * fls64(value) returns 0 if value is 0 or the position of the last
+ * set bit if value is nonzero. The last (most significant) bit is
+ * at position 64.
  */
-static inline unsigned long find_first_bit_left(const unsigned long *addr,
-						unsigned long size)
-{
-	unsigned long bytes, bits;
-
-	if (!size)
-		return 0;
-	bytes = __ffs_word_loop(addr, size);
-	bits = __flo_word(bytes * 8, __load_ulong_be(addr, bytes));
-	return (bits < size) ? bits : size;
-}
-
-static inline int find_next_bit_left(const unsigned long *addr,
-				     unsigned long size,
-				     unsigned long offset)
+static inline int fls64(unsigned long word)
 {
-	const unsigned long *p;
-	unsigned long bit, set;
-
-	if (offset >= size)
-		return size;
-	bit = offset & (BITS_PER_LONG - 1);
-	offset -= bit;
-	size -= offset;
-	p = addr + offset / BITS_PER_LONG;
-	if (bit) {
-		set = __flo_word(0, *p & (~0UL >> bit));
-		if (set >= size)
-			return size + offset;
-		if (set < BITS_PER_LONG)
-			return set + offset;
-		offset += BITS_PER_LONG;
-		size -= BITS_PER_LONG;
-		p++;
-	}
-	return offset + find_first_bit_left(p, size);
-}
-
-#define for_each_set_bit_left(bit, addr, size)				\
-	for ((bit) = find_first_bit_left((addr), (size));		\
-	     (bit) < (size);						\
-	     (bit) = find_next_bit_left((addr), (size), (bit) + 1))
-
-/* same as for_each_set_bit() but use bit as value to start with */
-#define for_each_set_bit_left_cont(bit, addr, size)			\
-	for ((bit) = find_next_bit_left((addr), (size), (bit));		\
-	     (bit) < (size);						\
-	     (bit) = find_next_bit_left((addr), (size), (bit) + 1))
+	unsigned long mask = 2 * BITS_PER_LONG - 1;
 
-/**
- * find_next_zero_bit - find the first zero bit in a memory region
- * @addr: The address to base the search on
- * @offset: The bitnumber to start searching at
- * @size: The maximum size to search
- */
-static inline int find_next_zero_bit (const unsigned long * addr,
-				      unsigned long size,
-				      unsigned long offset)
-{
-        const unsigned long *p;
-	unsigned long bit, set;
-
-	if (offset >= size)
-		return size;
-	bit = offset & (BITS_PER_LONG - 1);
-	offset -= bit;
-	size -= offset;
-	p = addr + offset / BITS_PER_LONG;
-	if (bit) {
-		/*
-		 * __ffz_word returns BITS_PER_LONG
-		 * if no zero bit is present in the word.
-		 */
-		set = __ffz_word(bit, *p >> bit);
-		if (set >= size)
-			return size + offset;
-		if (set < BITS_PER_LONG)
-			return set + offset;
-		offset += BITS_PER_LONG;
-		size -= BITS_PER_LONG;
-		p++;
-	}
-	return offset + find_first_zero_bit(p, size);
+	return (1 + (__flogr(word) ^ (BITS_PER_LONG - 1))) & mask;
 }
-#define find_next_zero_bit find_next_zero_bit
 
 /**
- * find_next_bit - find the first set bit in a memory region
- * @addr: The address to base the search on
- * @offset: The bitnumber to start searching at
- * @size: The maximum size to search
+ * fls - find last (most-significant) bit set
+ * @word: the word to search
+ *
+ * This is defined the same way as ffs.
+ * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
  */
-static inline int find_next_bit (const unsigned long * addr,
-				 unsigned long size,
-				 unsigned long offset)
+static inline int fls(int word)
 {
-        const unsigned long *p;
-	unsigned long bit, set;
-
-	if (offset >= size)
-		return size;
-	bit = offset & (BITS_PER_LONG - 1);
-	offset -= bit;
-	size -= offset;
-	p = addr + offset / BITS_PER_LONG;
-	if (bit) {
-		/*
-		 * __ffs_word returns BITS_PER_LONG
-		 * if no one bit is present in the word.
-		 */
-		set = __ffs_word(0, *p & (~0UL << bit));
-		if (set >= size)
-			return size + offset;
-		if (set < BITS_PER_LONG)
-			return set + offset;
-		offset += BITS_PER_LONG;
-		size -= BITS_PER_LONG;
-		p++;
-	}
-	return offset + find_first_bit(p, size);
+	return fls64((unsigned int)word);
 }
-#define find_next_bit find_next_bit
 
-/*
- * Every architecture must define this function. It's the fastest
- * way of searching a 140-bit bitmap where the first 100 bits are
- * unlikely to be set. It's guaranteed that at least one of the 140
- * bits is cleared.
- */
-static inline int sched_find_first_bit(unsigned long *b)
-{
-	return find_first_bit(b, 140);
-}
+#else /* CONFIG_HAVE_MARCH_Z9_109_FEATURES */
 
-#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/ffs.h>
 #include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/fls.h>
 #include <asm-generic/bitops/fls64.h>
 
+#endif /* CONFIG_HAVE_MARCH_Z9_109_FEATURES */
+
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/find.h>
 #include <asm-generic/bitops/hweight.h>
 #include <asm-generic/bitops/lock.h>
-
-/*
- * ATTENTION: intel byte ordering convention for ext2 and minix !!
- * bit 0 is the LSB of addr; bit 31 is the MSB of addr;
- * bit 32 is the LSB of (addr+4).
- * That combined with the little endian byte order of Intel gives the
- * following bit order in memory:
- *    07 06 05 04 03 02 01 00 15 14 13 12 11 10 09 08 \
- *    23 22 21 20 19 18 17 16 31 30 29 28 27 26 25 24
- */
-
-static inline int find_first_zero_bit_le(void *vaddr, unsigned int size)
-{
-	unsigned long bytes, bits;
-
-        if (!size)
-                return 0;
-	bytes = __ffz_word_loop(vaddr, size);
-	bits = __ffz_word(bytes*8, __load_ulong_le(vaddr, bytes));
-	return (bits < size) ? bits : size;
-}
-#define find_first_zero_bit_le find_first_zero_bit_le
-
-static inline int find_next_zero_bit_le(void *vaddr, unsigned long size,
-					  unsigned long offset)
-{
-        unsigned long *addr = vaddr, *p;
-	unsigned long bit, set;
-
-        if (offset >= size)
-                return size;
-	bit = offset & (BITS_PER_LONG - 1);
-	offset -= bit;
-	size -= offset;
-	p = addr + offset / BITS_PER_LONG;
-        if (bit) {
-		/*
-		 * s390 version of ffz returns BITS_PER_LONG
-		 * if no zero bit is present in the word.
-		 */
-		set = __ffz_word(bit, __load_ulong_le(p, 0) >> bit);
-		if (set >= size)
-			return size + offset;
-		if (set < BITS_PER_LONG)
-			return set + offset;
-		offset += BITS_PER_LONG;
-		size -= BITS_PER_LONG;
-		p++;
-        }
-	return offset + find_first_zero_bit_le(p, size);
-}
-#define find_next_zero_bit_le find_next_zero_bit_le
-
-static inline unsigned long find_first_bit_le(void *vaddr, unsigned long size)
-{
-	unsigned long bytes, bits;
-
-	if (!size)
-		return 0;
-	bytes = __ffs_word_loop(vaddr, size);
-	bits = __ffs_word(bytes*8, __load_ulong_le(vaddr, bytes));
-	return (bits < size) ? bits : size;
-}
-#define find_first_bit_le find_first_bit_le
-
-static inline int find_next_bit_le(void *vaddr, unsigned long size,
-				     unsigned long offset)
-{
-	unsigned long *addr = vaddr, *p;
-	unsigned long bit, set;
-
-	if (offset >= size)
-		return size;
-	bit = offset & (BITS_PER_LONG - 1);
-	offset -= bit;
-	size -= offset;
-	p = addr + offset / BITS_PER_LONG;
-	if (bit) {
-		/*
-		 * s390 version of ffz returns BITS_PER_LONG
-		 * if no zero bit is present in the word.
-		 */
-		set = __ffs_word(0, __load_ulong_le(p, 0) & (~0UL << bit));
-		if (set >= size)
-			return size + offset;
-		if (set < BITS_PER_LONG)
-			return set + offset;
-		offset += BITS_PER_LONG;
-		size -= BITS_PER_LONG;
-		p++;
-	}
-	return offset + find_first_bit_le(p, size);
-}
-#define find_next_bit_le find_next_bit_le
-
+#include <asm-generic/bitops/sched.h>
 #include <asm-generic/bitops/le.h>
-
 #include <asm-generic/bitops/ext2-atomic-setbit.h>
 
 #endif /* _S390_BITOPS_H */
diff --git a/arch/s390/include/asm/cio.h b/arch/s390/include/asm/cio.h
index ffb8989..d426250 100644
--- a/arch/s390/include/asm/cio.h
+++ b/arch/s390/include/asm/cio.h
@@ -296,6 +296,7 @@ static inline int ccw_dev_id_is_equal(struct ccw_dev_id *dev_id1,
 	return 0;
 }
 
+void channel_subsystem_reinit(void);
 extern void css_schedule_reprobe(void);
 
 extern void reipl_ccw_dev(struct ccw_dev_id *id);
diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h
index c1e7c64..4bf9da0 100644
--- a/arch/s390/include/asm/compat.h
+++ b/arch/s390/include/asm/compat.h
@@ -22,6 +22,7 @@
 #define PSW32_MASK_ASC		0x0000C000UL
 #define PSW32_MASK_CC		0x00003000UL
 #define PSW32_MASK_PM		0x00000f00UL
+#define PSW32_MASK_RI		0x00000080UL
 
 #define PSW32_MASK_USER		0x0000FF00UL
 
@@ -35,7 +36,9 @@
 #define PSW32_ASC_SECONDARY	0x00008000UL
 #define PSW32_ASC_HOME		0x0000C000UL
 
-extern u32 psw32_user_bits;
+#define PSW32_USER_BITS (PSW32_MASK_DAT | PSW32_MASK_IO | PSW32_MASK_EXT | \
+			 PSW32_DEFAULT_KEY | PSW32_MASK_BASE | \
+			 PSW32_MASK_MCHECK | PSW32_MASK_PSTATE | PSW32_ASC_HOME)
 
 #define COMPAT_USER_HZ		100
 #define COMPAT_UTS_MACHINE	"s390\0\0\0\0"
diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h
index d2ff4137..f65bd36 100644
--- a/arch/s390/include/asm/cputime.h
+++ b/arch/s390/include/asm/cputime.h
@@ -13,9 +13,6 @@
 #include <asm/div64.h>
 
 
-#define __ARCH_HAS_VTIME_ACCOUNT
-#define __ARCH_HAS_VTIME_TASK_SWITCH
-
 /* We want to use full resolution of the CPU timer: 2**-12 micro-seconds. */
 
 typedef unsigned long long __nocast cputime_t;
diff --git a/arch/s390/include/asm/ctl_reg.h b/arch/s390/include/asm/ctl_reg.h
index debfda3..9b69c0b 100644
--- a/arch/s390/include/asm/ctl_reg.h
+++ b/arch/s390/include/asm/ctl_reg.h
@@ -8,69 +8,59 @@
 #define __ASM_CTL_REG_H
 
 #ifdef CONFIG_64BIT
-
-#define __ctl_load(array, low, high) ({				\
-	typedef struct { char _[sizeof(array)]; } addrtype;	\
-	asm volatile(						\
-		"	lctlg	%1,%2,%0\n"			\
-		: : "Q" (*(addrtype *)(&array)),		\
-		    "i" (low), "i" (high));			\
-	})
-
-#define __ctl_store(array, low, high) ({			\
-	typedef struct { char _[sizeof(array)]; } addrtype;	\
-	asm volatile(						\
-		"	stctg	%1,%2,%0\n"			\
-		: "=Q" (*(addrtype *)(&array))			\
-		: "i" (low), "i" (high));			\
-	})
-
-#else /* CONFIG_64BIT */
-
-#define __ctl_load(array, low, high) ({				\
-	typedef struct { char _[sizeof(array)]; } addrtype;	\
-	asm volatile(						\
-		"	lctl	%1,%2,%0\n"			\
-		: : "Q" (*(addrtype *)(&array)),		\
-		    "i" (low), "i" (high));			\
-})
-
-#define __ctl_store(array, low, high) ({			\
-	typedef struct { char _[sizeof(array)]; } addrtype;	\
-	asm volatile(						\
-		"	stctl	%1,%2,%0\n"			\
-		: "=Q" (*(addrtype *)(&array))			\
-		: "i" (low), "i" (high));			\
-	})
-
-#endif /* CONFIG_64BIT */
-
-#define __ctl_set_bit(cr, bit) ({	\
-	unsigned long __dummy;		\
-	__ctl_store(__dummy, cr, cr);	\
-	__dummy |= 1UL << (bit);	\
-	__ctl_load(__dummy, cr, cr);	\
-})
-
-#define __ctl_clear_bit(cr, bit) ({	\
-	unsigned long __dummy;		\
-	__ctl_store(__dummy, cr, cr);	\
-	__dummy &= ~(1UL << (bit));	\
-	__ctl_load(__dummy, cr, cr);	\
-})
+# define __CTL_LOAD	"lctlg"
+# define __CTL_STORE	"stctg"
+#else
+# define __CTL_LOAD	"lctl"
+# define __CTL_STORE	"stctl"
+#endif
+
+#define __ctl_load(array, low, high) {					\
+	typedef struct { char _[sizeof(array)]; } addrtype;		\
+									\
+	BUILD_BUG_ON(sizeof(addrtype) != (high - low + 1) * sizeof(long));\
+	asm volatile(							\
+		__CTL_LOAD " %1,%2,%0\n"				\
+		: : "Q" (*(addrtype *)(&array)), "i" (low), "i" (high));\
+}
+
+#define __ctl_store(array, low, high) {					\
+	typedef struct { char _[sizeof(array)]; } addrtype;		\
+									\
+	BUILD_BUG_ON(sizeof(addrtype) != (high - low + 1) * sizeof(long));\
+	asm volatile(							\
+		__CTL_STORE " %1,%2,%0\n"				\
+		: "=Q" (*(addrtype *)(&array))				\
+		: "i" (low), "i" (high));				\
+}
+
+static inline void __ctl_set_bit(unsigned int cr, unsigned int bit)
+{
+	unsigned long reg;
+
+	__ctl_store(reg, cr, cr);
+	reg |= 1UL << bit;
+	__ctl_load(reg, cr, cr);
+}
+
+static inline void __ctl_clear_bit(unsigned int cr, unsigned int bit)
+{
+	unsigned long reg;
+
+	__ctl_store(reg, cr, cr);
+	reg &= ~(1UL << bit);
+	__ctl_load(reg, cr, cr);
+}
+
+void smp_ctl_set_bit(int cr, int bit);
+void smp_ctl_clear_bit(int cr, int bit);
 
 #ifdef CONFIG_SMP
-
-extern void smp_ctl_set_bit(int cr, int bit);
-extern void smp_ctl_clear_bit(int cr, int bit);
-#define ctl_set_bit(cr, bit) smp_ctl_set_bit(cr, bit)
-#define ctl_clear_bit(cr, bit) smp_ctl_clear_bit(cr, bit)
-
+# define ctl_set_bit(cr, bit) smp_ctl_set_bit(cr, bit)
+# define ctl_clear_bit(cr, bit) smp_ctl_clear_bit(cr, bit)
 #else
-
-#define ctl_set_bit(cr, bit) __ctl_set_bit(cr, bit)
-#define ctl_clear_bit(cr, bit) __ctl_clear_bit(cr, bit)
-
-#endif /* CONFIG_SMP */
+# define ctl_set_bit(cr, bit) __ctl_set_bit(cr, bit)
+# define ctl_clear_bit(cr, bit) __ctl_clear_bit(cr, bit)
+#endif
 
 #endif /* __ASM_CTL_REG_H */
diff --git a/arch/s390/include/asm/debug.h b/arch/s390/include/asm/debug.h
index 188c505..530c15e 100644
--- a/arch/s390/include/asm/debug.h
+++ b/arch/s390/include/asm/debug.h
@@ -107,6 +107,11 @@ void debug_set_level(debug_info_t* id, int new_level);
 void debug_set_critical(void);
 void debug_stop_all(void);
 
+static inline bool debug_level_enabled(debug_info_t* id, int level)
+{
+	return level <= id->level;
+}
+
 static inline debug_entry_t*
 debug_event(debug_info_t* id, int level, void* data, int length)
 {
diff --git a/arch/s390/include/asm/dis.h b/arch/s390/include/asm/dis.h
new file mode 100644
index 0000000..04a83f5
--- /dev/null
+++ b/arch/s390/include/asm/dis.h
@@ -0,0 +1,52 @@
+/*
+ * Disassemble s390 instructions.
+ *
+ * Copyright IBM Corp. 2007
+ * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
+ */
+
+#ifndef __ASM_S390_DIS_H__
+#define __ASM_S390_DIS_H__
+
+/* Type of operand */
+#define OPERAND_GPR	0x1	/* Operand printed as %rx */
+#define OPERAND_FPR	0x2	/* Operand printed as %fx */
+#define OPERAND_AR	0x4	/* Operand printed as %ax */
+#define OPERAND_CR	0x8	/* Operand printed as %cx */
+#define OPERAND_DISP	0x10	/* Operand printed as displacement */
+#define OPERAND_BASE	0x20	/* Operand printed as base register */
+#define OPERAND_INDEX	0x40	/* Operand printed as index register */
+#define OPERAND_PCREL	0x80	/* Operand printed as pc-relative symbol */
+#define OPERAND_SIGNED	0x100	/* Operand printed as signed value */
+#define OPERAND_LENGTH	0x200	/* Operand printed as length (+1) */
+
+
+struct s390_operand {
+	int bits;		/* The number of bits in the operand. */
+	int shift;		/* The number of bits to shift. */
+	int flags;		/* One bit syntax flags. */
+};
+
+struct s390_insn {
+	const char name[5];
+	unsigned char opfrag;
+	unsigned char format;
+};
+
+
+static inline int insn_length(unsigned char code)
+{
+	return ((((int) code + 64) >> 7) + 1) << 1;
+}
+
+void show_code(struct pt_regs *regs);
+void print_fn_code(unsigned char *code, unsigned long len);
+int insn_to_mnemonic(unsigned char *instruction, char *buf, unsigned int len);
+struct s390_insn *find_insn(unsigned char *code);
+
+static inline int is_known_insn(unsigned char *code)
+{
+	return !!find_insn(code);
+}
+
+#endif /* __ASM_S390_DIS_H__ */
diff --git a/arch/s390/include/asm/fcx.h b/arch/s390/include/asm/fcx.h
index ef61709..7ecb92b 100644
--- a/arch/s390/include/asm/fcx.h
+++ b/arch/s390/include/asm/fcx.h
@@ -12,9 +12,9 @@
 
 #define TCW_FORMAT_DEFAULT		0
 #define TCW_TIDAW_FORMAT_DEFAULT	0
-#define TCW_FLAGS_INPUT_TIDA		1 << (23 - 5)
-#define TCW_FLAGS_TCCB_TIDA		1 << (23 - 6)
-#define TCW_FLAGS_OUTPUT_TIDA		1 << (23 - 7)
+#define TCW_FLAGS_INPUT_TIDA		(1 << (23 - 5))
+#define TCW_FLAGS_TCCB_TIDA		(1 << (23 - 6))
+#define TCW_FLAGS_OUTPUT_TIDA		(1 << (23 - 7))
 #define TCW_FLAGS_TIDAW_FORMAT(x)	((x) & 3) << (23 - 9)
 #define TCW_FLAGS_GET_TIDAW_FORMAT(x)	(((x) >> (23 - 9)) & 3)
 
@@ -54,11 +54,11 @@ struct tcw {
 	u32 intrg;
 } __attribute__ ((packed, aligned(64)));
 
-#define TIDAW_FLAGS_LAST		1 << (7 - 0)
-#define TIDAW_FLAGS_SKIP		1 << (7 - 1)
-#define TIDAW_FLAGS_DATA_INT		1 << (7 - 2)
-#define TIDAW_FLAGS_TTIC		1 << (7 - 3)
-#define TIDAW_FLAGS_INSERT_CBC		1 << (7 - 4)
+#define TIDAW_FLAGS_LAST		(1 << (7 - 0))
+#define TIDAW_FLAGS_SKIP		(1 << (7 - 1))
+#define TIDAW_FLAGS_DATA_INT		(1 << (7 - 2))
+#define TIDAW_FLAGS_TTIC		(1 << (7 - 3))
+#define TIDAW_FLAGS_INSERT_CBC		(1 << (7 - 4))
 
 /**
  * struct tidaw - Transport-Indirect-Addressing Word (TIDAW)
@@ -106,9 +106,9 @@ struct tsa_ddpc {
 	u8 sense[32];
 } __attribute__ ((packed));
 
-#define TSA_INTRG_FLAGS_CU_STATE_VALID		1 << (7 - 0)
-#define TSA_INTRG_FLAGS_DEV_STATE_VALID		1 << (7 - 1)
-#define TSA_INTRG_FLAGS_OP_STATE_VALID		1 << (7 - 2)
+#define TSA_INTRG_FLAGS_CU_STATE_VALID		(1 << (7 - 0))
+#define TSA_INTRG_FLAGS_DEV_STATE_VALID		(1 << (7 - 1))
+#define TSA_INTRG_FLAGS_OP_STATE_VALID		(1 << (7 - 2))
 
 /**
  * struct tsa_intrg - Interrogate Transport-Status Area (Intrg. TSA)
@@ -140,10 +140,10 @@ struct tsa_intrg {
 #define TSB_FORMAT_DDPC		2
 #define TSB_FORMAT_INTRG	3
 
-#define TSB_FLAGS_DCW_OFFSET_VALID	1 << (7 - 0)
-#define TSB_FLAGS_COUNT_VALID		1 << (7 - 1)
-#define TSB_FLAGS_CACHE_MISS		1 << (7 - 2)
-#define TSB_FLAGS_TIME_VALID		1 << (7 - 3)
+#define TSB_FLAGS_DCW_OFFSET_VALID	(1 << (7 - 0))
+#define TSB_FLAGS_COUNT_VALID		(1 << (7 - 1))
+#define TSB_FLAGS_CACHE_MISS		(1 << (7 - 2))
+#define TSB_FLAGS_TIME_VALID		(1 << (7 - 3))
 #define TSB_FLAGS_FORMAT(x)		((x) & 7)
 #define TSB_FORMAT(t)			((t)->flags & 7)
 
@@ -179,9 +179,9 @@ struct tsb {
 #define DCW_INTRG_RCQ_PRIMARY		1
 #define DCW_INTRG_RCQ_SECONDARY		2
 
-#define DCW_INTRG_FLAGS_MPM		1 < (7 - 0)
-#define DCW_INTRG_FLAGS_PPR		1 < (7 - 1)
-#define DCW_INTRG_FLAGS_CRIT		1 < (7 - 2)
+#define DCW_INTRG_FLAGS_MPM		(1 << (7 - 0))
+#define DCW_INTRG_FLAGS_PPR		(1 << (7 - 1))
+#define DCW_INTRG_FLAGS_CRIT		(1 << (7 - 2))
 
 /**
  * struct dcw_intrg_data - Interrogate DCW data
@@ -216,7 +216,7 @@ struct dcw_intrg_data {
 	u8  prog_data[0];
 } __attribute__ ((packed));
 
-#define DCW_FLAGS_CC		1 << (7 - 1)
+#define DCW_FLAGS_CC		(1 << (7 - 1))
 
 #define DCW_CMD_WRITE		0x01
 #define DCW_CMD_READ		0x02
diff --git a/arch/s390/include/asm/hardirq.h b/arch/s390/include/asm/hardirq.h
index 0c82ba8..a908d29 100644
--- a/arch/s390/include/asm/hardirq.h
+++ b/arch/s390/include/asm/hardirq.h
@@ -20,4 +20,9 @@
 
 #define HARDIRQ_BITS	8
 
+static inline void ack_bad_irq(unsigned int irq)
+{
+	printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq);
+}
+
 #endif /* __ASM_HARDIRQ_H */
diff --git a/arch/s390/include/asm/hugetlb.h b/arch/s390/include/asm/hugetlb.h
index bd90359..11eae5f 100644
--- a/arch/s390/include/asm/hugetlb.h
+++ b/arch/s390/include/asm/hugetlb.h
@@ -17,6 +17,9 @@
 
 void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
 		     pte_t *ptep, pte_t pte);
+pte_t huge_ptep_get(pte_t *ptep);
+pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
+			      unsigned long addr, pte_t *ptep);
 
 /*
  * If the arch doesn't supply something else, assume that hugepage
@@ -38,147 +41,75 @@ static inline int prepare_hugepage_range(struct file *file,
 int arch_prepare_hugepage(struct page *page);
 void arch_release_hugepage(struct page *page);
 
-static inline pte_t huge_pte_wrprotect(pte_t pte)
+static inline void huge_pte_clear(struct mm_struct *mm, unsigned long addr,
+				  pte_t *ptep)
 {
-	pte_val(pte) |= _PAGE_RO;
-	return pte;
+	pte_val(*ptep) = _SEGMENT_ENTRY_EMPTY;
 }
 
-static inline int huge_pte_none(pte_t pte)
+static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
+					 unsigned long address, pte_t *ptep)
 {
-	return (pte_val(pte) & _SEGMENT_ENTRY_INV) &&
-		!(pte_val(pte) & _SEGMENT_ENTRY_RO);
+	huge_ptep_get_and_clear(vma->vm_mm, address, ptep);
 }
 
-static inline pte_t huge_ptep_get(pte_t *ptep)
+static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
+					     unsigned long addr, pte_t *ptep,
+					     pte_t pte, int dirty)
 {
-	pte_t pte = *ptep;
-	unsigned long mask;
-
-	if (!MACHINE_HAS_HPAGE) {
-		ptep = (pte_t *) (pte_val(pte) & _SEGMENT_ENTRY_ORIGIN);
-		if (ptep) {
-			mask = pte_val(pte) &
-				(_SEGMENT_ENTRY_INV | _SEGMENT_ENTRY_RO);
-			pte = pte_mkhuge(*ptep);
-			pte_val(pte) |= mask;
-		}
+	int changed = !pte_same(huge_ptep_get(ptep), pte);
+	if (changed) {
+		huge_ptep_get_and_clear(vma->vm_mm, addr, ptep);
+		set_huge_pte_at(vma->vm_mm, addr, ptep, pte);
 	}
-	return pte;
+	return changed;
 }
 
-static inline void __pmd_csp(pmd_t *pmdp)
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+					   unsigned long addr, pte_t *ptep)
 {
-	register unsigned long reg2 asm("2") = pmd_val(*pmdp);
-	register unsigned long reg3 asm("3") = pmd_val(*pmdp) |
-					       _SEGMENT_ENTRY_INV;
-	register unsigned long reg4 asm("4") = ((unsigned long) pmdp) + 5;
-
-	asm volatile(
-		"	csp %1,%3"
-		: "=m" (*pmdp)
-		: "d" (reg2), "d" (reg3), "d" (reg4), "m" (*pmdp) : "cc");
+	pte_t pte = huge_ptep_get_and_clear(mm, addr, ptep);
+	set_huge_pte_at(mm, addr, ptep, pte_wrprotect(pte));
 }
 
-static inline void huge_ptep_invalidate(struct mm_struct *mm,
-					unsigned long address, pte_t *ptep)
-{
-	pmd_t *pmdp = (pmd_t *) ptep;
-
-	if (MACHINE_HAS_IDTE)
-		__pmd_idte(address, pmdp);
-	else
-		__pmd_csp(pmdp);
-	pmd_val(*pmdp) = _SEGMENT_ENTRY_INV | _SEGMENT_ENTRY;
-}
-
-static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
-					    unsigned long addr, pte_t *ptep)
-{
-	pte_t pte = huge_ptep_get(ptep);
-
-	huge_ptep_invalidate(mm, addr, ptep);
-	return pte;
-}
-
-#define huge_ptep_set_access_flags(__vma, __addr, __ptep, __entry, __dirty) \
-({									    \
-	int __changed = !pte_same(huge_ptep_get(__ptep), __entry);	    \
-	if (__changed) {						    \
-		huge_ptep_invalidate((__vma)->vm_mm, __addr, __ptep);	    \
-		set_huge_pte_at((__vma)->vm_mm, __addr, __ptep, __entry);   \
-	}								    \
-	__changed;							    \
-})
-
-#define huge_ptep_set_wrprotect(__mm, __addr, __ptep)			\
-({									\
-	pte_t __pte = huge_ptep_get(__ptep);				\
-	if (huge_pte_write(__pte)) {					\
-		huge_ptep_invalidate(__mm, __addr, __ptep);		\
-		set_huge_pte_at(__mm, __addr, __ptep,			\
-				huge_pte_wrprotect(__pte));		\
-	}								\
-})
-
-static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
-					 unsigned long address, pte_t *ptep)
+static inline pte_t mk_huge_pte(struct page *page, pgprot_t pgprot)
 {
-	huge_ptep_invalidate(vma->vm_mm, address, ptep);
+	return mk_pte(page, pgprot);
 }
 
-static inline pte_t mk_huge_pte(struct page *page, pgprot_t pgprot)
+static inline int huge_pte_none(pte_t pte)
 {
-	pte_t pte;
-	pmd_t pmd;
-
-	pmd = mk_pmd_phys(page_to_phys(page), pgprot);
-	pte_val(pte) = pmd_val(pmd);
-	return pte;
+	return pte_none(pte);
 }
 
 static inline int huge_pte_write(pte_t pte)
 {
-	pmd_t pmd;
-
-	pmd_val(pmd) = pte_val(pte);
-	return pmd_write(pmd);
+	return pte_write(pte);
 }
 
 static inline int huge_pte_dirty(pte_t pte)
 {
-	/* No dirty bit in the segment table entry. */
-	return 0;
+	return pte_dirty(pte);
 }
 
 static inline pte_t huge_pte_mkwrite(pte_t pte)
 {
-	pmd_t pmd;
-
-	pmd_val(pmd) = pte_val(pte);
-	pte_val(pte) = pmd_val(pmd_mkwrite(pmd));
-	return pte;
+	return pte_mkwrite(pte);
 }
 
 static inline pte_t huge_pte_mkdirty(pte_t pte)
 {
-	/* No dirty bit in the segment table entry. */
-	return pte;
+	return pte_mkdirty(pte);
 }
 
-static inline pte_t huge_pte_modify(pte_t pte, pgprot_t newprot)
+static inline pte_t huge_pte_wrprotect(pte_t pte)
 {
-	pmd_t pmd;
-
-	pmd_val(pmd) = pte_val(pte);
-	pte_val(pte) = pmd_val(pmd_modify(pmd, newprot));
-	return pte;
+	return pte_wrprotect(pte);
 }
 
-static inline void huge_pte_clear(struct mm_struct *mm, unsigned long addr,
-				  pte_t *ptep)
+static inline pte_t huge_pte_modify(pte_t pte, pgprot_t newprot)
 {
-	pmd_clear((pmd_t *) ptep);
+	return pte_modify(pte, newprot);
 }
 
 #endif /* _ASM_S390_HUGETLB_H */
diff --git a/arch/s390/include/asm/hw_irq.h b/arch/s390/include/asm/hw_irq.h
index 7e3d258..ee96a8b 100644
--- a/arch/s390/include/asm/hw_irq.h
+++ b/arch/s390/include/asm/hw_irq.h
@@ -4,19 +4,8 @@
 #include <linux/msi.h>
 #include <linux/pci.h>
 
-static inline struct msi_desc *irq_get_msi_desc(unsigned int irq)
-{
-	return __irq_get_msi_desc(irq);
-}
-
-/* Must be called with msi map lock held */
-static inline int irq_set_msi_desc(unsigned int irq, struct msi_desc *msi)
-{
-	if (!msi)
-		return -EINVAL;
-
-	msi->irq = irq;
-	return 0;
-}
+void __init init_airq_interrupts(void);
+void __init init_cio_interrupts(void);
+void __init init_ext_interrupts(void);
 
 #endif
diff --git a/arch/s390/include/asm/ipl.h b/arch/s390/include/asm/ipl.h
index 2bd6cb89..2fcccc0 100644
--- a/arch/s390/include/asm/ipl.h
+++ b/arch/s390/include/asm/ipl.h
@@ -7,6 +7,7 @@
 #ifndef _ASM_S390_IPL_H
 #define _ASM_S390_IPL_H
 
+#include <asm/lowcore.h>
 #include <asm/types.h>
 #include <asm/cio.h>
 #include <asm/setup.h>
@@ -86,7 +87,14 @@ struct ipl_parameter_block {
  */
 extern u32 ipl_flags;
 extern u32 dump_prefix_page;
-extern unsigned int zfcpdump_prefix_array[];
+
+struct dump_save_areas {
+	struct save_area **areas;
+	int count;
+};
+
+extern struct dump_save_areas dump_save_areas;
+struct save_area *dump_save_area_create(int cpu);
 
 extern void do_reipl(void);
 extern void do_halt(void);
diff --git a/arch/s390/include/asm/irq.h b/arch/s390/include/asm/irq.h
index 87c17bf..5f8bcc5 100644
--- a/arch/s390/include/asm/irq.h
+++ b/arch/s390/include/asm/irq.h
@@ -1,17 +1,28 @@
 #ifndef _ASM_IRQ_H
 #define _ASM_IRQ_H
 
+#define EXT_INTERRUPT	1
+#define IO_INTERRUPT	2
+#define THIN_INTERRUPT	3
+
+#define NR_IRQS_BASE	4
+
+#ifdef CONFIG_PCI_NR_MSI
+# define NR_IRQS	(NR_IRQS_BASE + CONFIG_PCI_NR_MSI)
+#else
+# define NR_IRQS	NR_IRQS_BASE
+#endif
+
+/* This number is used when no interrupt has been assigned */
+#define NO_IRQ		0
+
+#ifndef __ASSEMBLY__
+
 #include <linux/hardirq.h>
 #include <linux/percpu.h>
 #include <linux/cache.h>
 #include <linux/types.h>
 
-enum interruption_main_class {
-	EXTERNAL_INTERRUPT,
-	IO_INTERRUPT,
-	NR_IRQS
-};
-
 enum interruption_class {
 	IRQEXT_CLK,
 	IRQEXT_EXC,
@@ -67,19 +78,17 @@ typedef void (*ext_int_handler_t)(struct ext_code, unsigned int, unsigned long);
 
 int register_external_interrupt(u16 code, ext_int_handler_t handler);
 int unregister_external_interrupt(u16 code, ext_int_handler_t handler);
-void service_subclass_irq_register(void);
-void service_subclass_irq_unregister(void);
-void measurement_alert_subclass_register(void);
-void measurement_alert_subclass_unregister(void);
-
-#ifdef CONFIG_LOCKDEP
-#  define disable_irq_nosync_lockdep(irq)	disable_irq_nosync(irq)
-#  define disable_irq_nosync_lockdep_irqsave(irq, flags) \
-						disable_irq_nosync(irq)
-#  define disable_irq_lockdep(irq)		disable_irq(irq)
-#  define enable_irq_lockdep(irq)		enable_irq(irq)
-#  define enable_irq_lockdep_irqrestore(irq, flags) \
-						enable_irq(irq)
-#endif
+
+enum irq_subclass {
+	IRQ_SUBCLASS_MEASUREMENT_ALERT = 5,
+	IRQ_SUBCLASS_SERVICE_SIGNAL = 9,
+};
+
+void irq_subclass_register(enum irq_subclass subclass);
+void irq_subclass_unregister(enum irq_subclass subclass);
+
+#define irq_canonicalize(irq)  (irq)
+
+#endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_IRQ_H */
diff --git a/arch/s390/include/asm/jump_label.h b/arch/s390/include/asm/jump_label.h
index 6c32190..346b1c8 100644
--- a/arch/s390/include/asm/jump_label.h
+++ b/arch/s390/include/asm/jump_label.h
@@ -15,7 +15,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key *key)
 {
-	asm goto("0:	brcl 0,0\n"
+	asm_volatile_goto("0:	brcl 0,0\n"
 		".pushsection __jump_table, \"aw\"\n"
 		ASM_ALIGN "\n"
 		ASM_PTR " 0b, %l[label], %0\n"
diff --git a/arch/s390/include/asm/kprobes.h b/arch/s390/include/asm/kprobes.h
index dcf6948..4176dfe 100644
--- a/arch/s390/include/asm/kprobes.h
+++ b/arch/s390/include/asm/kprobes.h
@@ -31,6 +31,8 @@
 #include <linux/ptrace.h>
 #include <linux/percpu.h>
 
+#define __ARCH_WANT_KPROBES_INSN_SLOT
+
 struct pt_regs;
 struct kprobe;
 
@@ -57,7 +59,7 @@ typedef u16 kprobe_opcode_t;
 /* Architecture specific copy of original instruction */
 struct arch_specific_insn {
 	/* copy of original instruction */
-	kprobe_opcode_t insn[MAX_INSN_SIZE];
+	kprobe_opcode_t *insn;
 };
 
 struct prev_kprobe {
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index 3238d40..e87ecaa 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -274,6 +274,14 @@ struct kvm_arch{
 	int css_support;
 };
 
+#define KVM_HVA_ERR_BAD		(-1UL)
+#define KVM_HVA_ERR_RO_BAD	(-2UL)
+
+static inline bool kvm_is_error_hva(unsigned long addr)
+{
+	return IS_ERR_VALUE(addr);
+}
+
 extern int sie64a(struct kvm_s390_sie_block *, u64 *);
 extern char sie_exit;
 #endif
diff --git a/arch/s390/include/asm/mmu.h b/arch/s390/include/asm/mmu.h
index 6340178..ff132ac 100644
--- a/arch/s390/include/asm/mmu.h
+++ b/arch/s390/include/asm/mmu.h
@@ -12,8 +12,6 @@ typedef struct {
 	unsigned long asce_bits;
 	unsigned long asce_limit;
 	unsigned long vdso_base;
-	/* Cloned contexts will be created with extended page tables. */
-	unsigned int alloc_pgste:1;
 	/* The mmu context has extended page tables. */
 	unsigned int has_pgste:1;
 } mm_context_t;
diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h
index 084e775..5d1f950 100644
--- a/arch/s390/include/asm/mmu_context.h
+++ b/arch/s390/include/asm/mmu_context.h
@@ -21,24 +21,7 @@ static inline int init_new_context(struct task_struct *tsk,
 #ifdef CONFIG_64BIT
 	mm->context.asce_bits |= _ASCE_TYPE_REGION3;
 #endif
-	if (current->mm && current->mm->context.alloc_pgste) {
-		/*
-		 * alloc_pgste indicates, that any NEW context will be created
-		 * with extended page tables. The old context is unchanged. The
-		 * page table allocation and the page table operations will
-		 * look at has_pgste to distinguish normal and extended page
-		 * tables. The only way to create extended page tables is to
-		 * set alloc_pgste and then create a new context (e.g. dup_mm).
-		 * The page table allocation is called after init_new_context
-		 * and if has_pgste is set, it will create extended page
-		 * tables.
-		 */
-		mm->context.has_pgste = 1;
-		mm->context.alloc_pgste = 1;
-	} else {
-		mm->context.has_pgste = 0;
-		mm->context.alloc_pgste = 0;
-	}
+	mm->context.has_pgste = 0;
 	mm->context.asce_limit = STACK_TOP_MAX;
 	crst_table_init((unsigned long *) mm->pgd, pgd_entry_type(mm));
 	return 0;
@@ -57,14 +40,8 @@ static inline void update_mm(struct mm_struct *mm, struct task_struct *tsk)
 	pgd_t *pgd = mm->pgd;
 
 	S390_lowcore.user_asce = mm->context.asce_bits | __pa(pgd);
-	if (s390_user_mode != HOME_SPACE_MODE) {
-		/* Load primary space page table origin. */
-		asm volatile(LCTL_OPCODE" 1,1,%0\n"
-			     : : "m" (S390_lowcore.user_asce) );
-	} else
-		/* Load home space page table origin. */
-		asm volatile(LCTL_OPCODE" 13,13,%0"
-			     : : "m" (S390_lowcore.user_asce) );
+	/* Load primary space page table origin. */
+	asm volatile(LCTL_OPCODE" 1,1,%0\n" : : "m" (S390_lowcore.user_asce));
 	set_fs(current->thread.mm_segment);
 }
 
@@ -77,8 +54,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	WARN_ON(atomic_read(&prev->context.attach_count) < 0);
 	atomic_inc(&next->context.attach_count);
 	/* Check for TLBs not flushed yet */
-	if (next->context.flush_mm)
-		__tlb_flush_mm(next);
+	__tlb_flush_mm_lazy(next);
 }
 
 #define enter_lazy_tlb(mm,tsk)	do { } while (0)
diff --git a/arch/s390/include/asm/mutex.h b/arch/s390/include/asm/mutex.h
index 688271f..458c1f7 100644
--- a/arch/s390/include/asm/mutex.h
+++ b/arch/s390/include/asm/mutex.h
@@ -7,5 +7,3 @@
  */
 
 #include <asm-generic/mutex-dec.h>
-
-#define arch_mutex_cpu_relax()	barrier()
diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h
index 5d64fb7..316c850 100644
--- a/arch/s390/include/asm/page.h
+++ b/arch/s390/include/asm/page.h
@@ -30,16 +30,11 @@
 #include <asm/setup.h>
 #ifndef __ASSEMBLY__
 
-void storage_key_init_range(unsigned long start, unsigned long end);
-
-static inline unsigned long pfmf(unsigned long function, unsigned long address)
+static inline void storage_key_init_range(unsigned long start, unsigned long end)
 {
-	asm volatile(
-		"	.insn	rre,0xb9af0000,%[function],%[address]"
-		: [address] "+a" (address)
-		: [function] "d" (function)
-		: "memory");
-	return address;
+#if PAGE_DEFAULT_KEY
+	__storage_key_init_range(start, end);
+#endif
 }
 
 static inline void clear_page(void *page)
@@ -150,15 +145,6 @@ static inline int page_reset_referenced(unsigned long addr)
 #define _PAGE_FP_BIT		0x08	/* HW fetch protection bit	*/
 #define _PAGE_ACC_BITS		0xf0	/* HW access control bits	*/
 
-/*
- * Test and clear referenced bit in storage key.
- */
-#define __HAVE_ARCH_PAGE_TEST_AND_CLEAR_YOUNG
-static inline int page_test_and_clear_young(unsigned long pfn)
-{
-	return page_reset_referenced(pfn << PAGE_SHIFT);
-}
-
 struct page;
 void arch_free_page(struct page *page, int order);
 void arch_alloc_page(struct page *page, int order);
diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h
index 6e577ba..1cc185d 100644
--- a/arch/s390/include/asm/pci.h
+++ b/arch/s390/include/asm/pci.h
@@ -6,6 +6,7 @@
 /* must be set before including pci_clp.h */
 #define PCI_BAR_COUNT	6
 
+#include <linux/pci.h>
 #include <asm-generic/pci.h>
 #include <asm-generic/pci-dma-compat.h>
 #include <asm/pci_clp.h>
@@ -21,10 +22,6 @@ void pci_iounmap(struct pci_dev *, void __iomem *);
 int pci_domain_nr(struct pci_bus *);
 int pci_proc_domain(struct pci_bus *);
 
-/* MSI arch hooks */
-#define arch_setup_msi_irqs	arch_setup_msi_irqs
-#define arch_teardown_msi_irqs	arch_teardown_msi_irqs
-
 #define ZPCI_BUS_NR			0	/* default bus number */
 #define ZPCI_DEVFN			0	/* default device number */
 
@@ -53,14 +50,9 @@ struct zpci_fmb {
 	atomic64_t unmapped_pages;
 } __packed __aligned(16);
 
-struct msi_map {
-	unsigned long irq;
-	struct msi_desc *msi;
-	struct hlist_node msi_chain;
-};
-
-#define ZPCI_NR_MSI_VECS	64
-#define ZPCI_MSI_MASK		(ZPCI_NR_MSI_VECS - 1)
+#define ZPCI_MSI_VEC_BITS	11
+#define ZPCI_MSI_VEC_MAX	(1 << ZPCI_MSI_VEC_BITS)
+#define ZPCI_MSI_VEC_MASK	(ZPCI_MSI_VEC_MAX - 1)
 
 enum zpci_state {
 	ZPCI_FN_STATE_RESERVED,
@@ -91,8 +83,7 @@ struct zpci_dev {
 
 	/* IRQ stuff */
 	u64		msi_addr;	/* MSI address */
-	struct zdev_irq_map *irq_map;
-	struct msi_map *msi_map[ZPCI_NR_MSI_VECS];
+	struct airq_iv *aibv;		/* adapter interrupt bit vector */
 	unsigned int	aisb;		/* number of the summary bit */
 
 	/* DMA stuff */
@@ -122,11 +113,6 @@ struct zpci_dev {
 	struct dentry	*debugfs_perf;
 };
 
-struct pci_hp_callback_ops {
-	int (*create_slot)	(struct zpci_dev *zdev);
-	void (*remove_slot)	(struct zpci_dev *zdev);
-};
-
 static inline bool zdev_enabled(struct zpci_dev *zdev)
 {
 	return (zdev->fh & (1UL << 31)) ? true : false;
@@ -146,32 +132,38 @@ int zpci_register_ioat(struct zpci_dev *, u8, u64, u64, u64);
 int zpci_unregister_ioat(struct zpci_dev *, u8);
 
 /* CLP */
-int clp_find_pci_devices(void);
+int clp_scan_pci_devices(void);
+int clp_rescan_pci_devices(void);
+int clp_rescan_pci_devices_simple(void);
 int clp_add_pci_device(u32, u32, int);
 int clp_enable_fh(struct zpci_dev *, u8);
 int clp_disable_fh(struct zpci_dev *);
 
-/* MSI */
-struct msi_desc *__irq_get_msi_desc(unsigned int);
-int zpci_msi_set_mask_bits(struct msi_desc *, u32, u32);
-int zpci_setup_msi_irq(struct zpci_dev *, struct msi_desc *, unsigned int, int);
-void zpci_teardown_msi_irq(struct zpci_dev *, struct msi_desc *);
-int zpci_msihash_init(void);
-void zpci_msihash_exit(void);
-
 #ifdef CONFIG_PCI
 /* Error handling and recovery */
 void zpci_event_error(void *);
 void zpci_event_availability(void *);
+void zpci_rescan(void);
 #else /* CONFIG_PCI */
 static inline void zpci_event_error(void *e) {}
 static inline void zpci_event_availability(void *e) {}
+static inline void zpci_rescan(void) {}
 #endif /* CONFIG_PCI */
 
+#ifdef CONFIG_HOTPLUG_PCI_S390
+int zpci_init_slot(struct zpci_dev *);
+void zpci_exit_slot(struct zpci_dev *);
+#else /* CONFIG_HOTPLUG_PCI_S390 */
+static inline int zpci_init_slot(struct zpci_dev *zdev)
+{
+	return 0;
+}
+static inline void zpci_exit_slot(struct zpci_dev *zdev) {}
+#endif /* CONFIG_HOTPLUG_PCI_S390 */
+
 /* Helpers */
 struct zpci_dev *get_zdev(struct pci_dev *);
 struct zpci_dev *get_zdev_by_fid(u32);
-bool zpci_fid_present(u32);
 
 /* sysfs */
 int zpci_sysfs_add_device(struct device *);
@@ -181,14 +173,6 @@ void zpci_sysfs_remove_device(struct device *);
 int zpci_dma_init(void);
 void zpci_dma_exit(void);
 
-/* Hotplug */
-extern struct mutex zpci_list_lock;
-extern struct list_head zpci_list;
-extern unsigned int s390_pci_probe;
-
-void zpci_register_hp_ops(struct pci_hp_callback_ops *);
-void zpci_deregister_hp_ops(void);
-
 /* FMB */
 int zpci_fmb_enable_device(struct zpci_dev *);
 int zpci_fmb_disable_device(struct zpci_dev *);
diff --git a/arch/s390/include/asm/pci_debug.h b/arch/s390/include/asm/pci_debug.h
index 1ca5d10..ac24b26 100644
--- a/arch/s390/include/asm/pci_debug.h
+++ b/arch/s390/include/asm/pci_debug.h
@@ -6,14 +6,9 @@
 extern debug_info_t *pci_debug_msg_id;
 extern debug_info_t *pci_debug_err_id;
 
-#ifdef CONFIG_PCI_DEBUG
 #define zpci_dbg(imp, fmt, args...)				\
 	debug_sprintf_event(pci_debug_msg_id, imp, fmt, ##args)
 
-#else /* !CONFIG_PCI_DEBUG */
-#define zpci_dbg(imp, fmt, args...) do { } while (0)
-#endif
-
 #define zpci_err(text...)							\
 	do {									\
 		char debug_buffer[16];						\
diff --git a/arch/s390/include/asm/pci_insn.h b/arch/s390/include/asm/pci_insn.h
index e6a2bdd..649eb62 100644
--- a/arch/s390/include/asm/pci_insn.h
+++ b/arch/s390/include/asm/pci_insn.h
@@ -54,11 +54,9 @@
 struct zpci_fib {
 	u32 fmt		:  8;	/* format */
 	u32		: 24;
-	u32 reserved1;
+	u32		: 32;
 	u8 fc;			/* function controls */
-	u8 reserved2;
-	u16 reserved3;
-	u32 reserved4;
+	u64		: 56;
 	u64 pba;		/* PCI base address */
 	u64 pal;		/* PCI address limit */
 	u64 iota;		/* I/O Translation Anchor */
@@ -70,20 +68,19 @@ struct zpci_fib {
 	u32 sum		:  1;	/* Adapter int summary bit enabled */
 	u32		:  1;
 	u32 aisbo	:  6;	/* Adapter int summary bit offset */
-	u32 reserved5;
+	u32		: 32;
 	u64 aibv;		/* Adapter int bit vector address */
 	u64 aisb;		/* Adapter int summary bit address */
 	u64 fmb_addr;		/* Function measurement block address and key */
-	u64 reserved6;
-	u64 reserved7;
-} __packed;
+	u32		: 32;
+	u32 gd;
+} __packed __aligned(8);
 
-
-int s390pci_mod_fc(u64 req, struct zpci_fib *fib);
-int s390pci_refresh_trans(u64 fn, u64 addr, u64 range);
-int s390pci_load(u64 *data, u64 req, u64 offset);
-int s390pci_store(u64 data, u64 req, u64 offset);
-int s390pci_store_block(const u64 *data, u64 req, u64 offset);
-void set_irq_ctrl(u16 ctl, char *unused, u8 isc);
+int zpci_mod_fc(u64 req, struct zpci_fib *fib);
+int zpci_refresh_trans(u64 fn, u64 addr, u64 range);
+int zpci_load(u64 *data, u64 req, u64 offset);
+int zpci_store(u64 data, u64 req, u64 offset);
+int zpci_store_block(const u64 *data, u64 req, u64 offset);
+void zpci_set_irq_ctrl(u16 ctl, char *unused, u8 isc);
 
 #endif
diff --git a/arch/s390/include/asm/pci_io.h b/arch/s390/include/asm/pci_io.h
index 83a9caa..d194d54 100644
--- a/arch/s390/include/asm/pci_io.h
+++ b/arch/s390/include/asm/pci_io.h
@@ -36,7 +36,7 @@ static inline RETTYPE zpci_read_##RETTYPE(const volatile void __iomem *addr)	\
 	u64 data;								\
 	int rc;									\
 										\
-	rc = s390pci_load(&data, req, ZPCI_OFFSET(addr));			\
+	rc = zpci_load(&data, req, ZPCI_OFFSET(addr));				\
 	if (rc)									\
 		data = -1ULL;							\
 	return (RETTYPE) data;							\
@@ -50,7 +50,7 @@ static inline void zpci_write_##VALTYPE(VALTYPE val,				\
 	u64 req = ZPCI_CREATE_REQ(entry->fh, entry->bar, LENGTH);		\
 	u64 data = (VALTYPE) val;						\
 										\
-	s390pci_store(data, req, ZPCI_OFFSET(addr));				\
+	zpci_store(data, req, ZPCI_OFFSET(addr));				\
 }
 
 zpci_read(8, u64)
@@ -83,7 +83,7 @@ static inline int zpci_write_single(u64 req, const u64 *data, u64 offset, u8 len
 		val = 0;		/* let FW report error */
 		break;
 	}
-	return s390pci_store(val, req, offset);
+	return zpci_store(val, req, offset);
 }
 
 static inline int zpci_read_single(u64 req, u64 *dst, u64 offset, u8 len)
@@ -91,7 +91,7 @@ static inline int zpci_read_single(u64 req, u64 *dst, u64 offset, u8 len)
 	u64 data;
 	int cc;
 
-	cc = s390pci_load(&data, req, offset);
+	cc = zpci_load(&data, req, offset);
 	if (cc)
 		goto out;
 
@@ -115,7 +115,7 @@ out:
 
 static inline int zpci_write_block(u64 req, const u64 *data, u64 offset)
 {
-	return s390pci_store_block(data, req, offset);
+	return zpci_store_block(data, req, offset);
 }
 
 static inline u8 zpci_get_max_write_size(u64 src, u64 dst, int len, int max)
diff --git a/arch/s390/include/asm/percpu.h b/arch/s390/include/asm/percpu.h
index 86fe0ee..fa91e00 100644
--- a/arch/s390/include/asm/percpu.h
+++ b/arch/s390/include/asm/percpu.h
@@ -10,16 +10,22 @@
  */
 #define __my_cpu_offset S390_lowcore.percpu_offset
 
+#ifdef CONFIG_64BIT
+
 /*
  * For 64 bit module code, the module may be more than 4G above the
  * per cpu area, use weak definitions to force the compiler to
  * generate external references.
  */
-#if defined(CONFIG_SMP) && defined(CONFIG_64BIT) && defined(MODULE)
+#if defined(CONFIG_SMP) && defined(MODULE)
 #define ARCH_NEEDS_WEAK_PER_CPU
 #endif
 
-#define arch_this_cpu_to_op(pcp, val, op)				\
+/*
+ * We use a compare-and-swap loop since that uses less cpu cycles than
+ * disabling and enabling interrupts like the generic variant would do.
+ */
+#define arch_this_cpu_to_op_simple(pcp, val, op)			\
 ({									\
 	typedef typeof(pcp) pcp_op_T__;					\
 	pcp_op_T__ old__, new__, prev__;				\
@@ -30,42 +36,101 @@
 	do {								\
 		old__ = prev__;						\
 		new__ = old__ op (val);					\
-		switch (sizeof(*ptr__)) {				\
-		case 8:							\
-			prev__ = cmpxchg64(ptr__, old__, new__);	\
-			break;						\
-		default:						\
-			prev__ = cmpxchg(ptr__, old__, new__);		\
-		}							\
+		prev__ = cmpxchg(ptr__, old__, new__);			\
 	} while (prev__ != old__);					\
 	preempt_enable();						\
 	new__;								\
 })
 
-#define this_cpu_add_1(pcp, val) arch_this_cpu_to_op(pcp, val, +)
-#define this_cpu_add_2(pcp, val) arch_this_cpu_to_op(pcp, val, +)
-#define this_cpu_add_4(pcp, val) arch_this_cpu_to_op(pcp, val, +)
-#define this_cpu_add_8(pcp, val) arch_this_cpu_to_op(pcp, val, +)
+#define this_cpu_add_1(pcp, val)	arch_this_cpu_to_op_simple(pcp, val, +)
+#define this_cpu_add_2(pcp, val)	arch_this_cpu_to_op_simple(pcp, val, +)
+#define this_cpu_add_return_1(pcp, val) arch_this_cpu_to_op_simple(pcp, val, +)
+#define this_cpu_add_return_2(pcp, val) arch_this_cpu_to_op_simple(pcp, val, +)
+#define this_cpu_and_1(pcp, val)	arch_this_cpu_to_op_simple(pcp, val, &)
+#define this_cpu_and_2(pcp, val)	arch_this_cpu_to_op_simple(pcp, val, &)
+#define this_cpu_or_1(pcp, val)		arch_this_cpu_to_op_simple(pcp, val, |)
+#define this_cpu_or_2(pcp, val)		arch_this_cpu_to_op_simple(pcp, val, |)
+
+#ifndef CONFIG_HAVE_MARCH_Z196_FEATURES
+
+#define this_cpu_add_4(pcp, val)	arch_this_cpu_to_op_simple(pcp, val, +)
+#define this_cpu_add_8(pcp, val)	arch_this_cpu_to_op_simple(pcp, val, +)
+#define this_cpu_add_return_4(pcp, val) arch_this_cpu_to_op_simple(pcp, val, +)
+#define this_cpu_add_return_8(pcp, val) arch_this_cpu_to_op_simple(pcp, val, +)
+#define this_cpu_and_4(pcp, val)	arch_this_cpu_to_op_simple(pcp, val, &)
+#define this_cpu_and_8(pcp, val)	arch_this_cpu_to_op_simple(pcp, val, &)
+#define this_cpu_or_4(pcp, val)		arch_this_cpu_to_op_simple(pcp, val, |)
+#define this_cpu_or_8(pcp, val)		arch_this_cpu_to_op_simple(pcp, val, |)
+
+#else /* CONFIG_HAVE_MARCH_Z196_FEATURES */
+
+#define arch_this_cpu_add(pcp, val, op1, op2, szcast)			\
+{									\
+	typedef typeof(pcp) pcp_op_T__; 				\
+	pcp_op_T__ val__ = (val);					\
+	pcp_op_T__ old__, *ptr__;					\
+	preempt_disable();						\
+	ptr__ = __this_cpu_ptr(&(pcp)); 				\
+	if (__builtin_constant_p(val__) &&				\
+	    ((szcast)val__ > -129) && ((szcast)val__ < 128)) {		\
+		asm volatile(						\
+			op2 "   %[ptr__],%[val__]\n"			\
+			: [ptr__] "+Q" (*ptr__) 			\
+			: [val__] "i" ((szcast)val__)			\
+			: "cc");					\
+	} else {							\
+		asm volatile(						\
+			op1 "   %[old__],%[val__],%[ptr__]\n"		\
+			: [old__] "=d" (old__), [ptr__] "+Q" (*ptr__)	\
+			: [val__] "d" (val__)				\
+			: "cc");					\
+	}								\
+	preempt_enable();						\
+}
 
-#define this_cpu_add_return_1(pcp, val) arch_this_cpu_to_op(pcp, val, +)
-#define this_cpu_add_return_2(pcp, val) arch_this_cpu_to_op(pcp, val, +)
-#define this_cpu_add_return_4(pcp, val) arch_this_cpu_to_op(pcp, val, +)
-#define this_cpu_add_return_8(pcp, val) arch_this_cpu_to_op(pcp, val, +)
+#define this_cpu_add_4(pcp, val) arch_this_cpu_add(pcp, val, "laa", "asi", int)
+#define this_cpu_add_8(pcp, val) arch_this_cpu_add(pcp, val, "laag", "agsi", long)
 
-#define this_cpu_and_1(pcp, val) arch_this_cpu_to_op(pcp, val, &)
-#define this_cpu_and_2(pcp, val) arch_this_cpu_to_op(pcp, val, &)
-#define this_cpu_and_4(pcp, val) arch_this_cpu_to_op(pcp, val, &)
-#define this_cpu_and_8(pcp, val) arch_this_cpu_to_op(pcp, val, &)
+#define arch_this_cpu_add_return(pcp, val, op)				\
+({									\
+	typedef typeof(pcp) pcp_op_T__; 				\
+	pcp_op_T__ val__ = (val);					\
+	pcp_op_T__ old__, *ptr__;					\
+	preempt_disable();						\
+	ptr__ = __this_cpu_ptr(&(pcp)); 				\
+	asm volatile(							\
+		op "    %[old__],%[val__],%[ptr__]\n"			\
+		: [old__] "=d" (old__), [ptr__] "+Q" (*ptr__)		\
+		: [val__] "d" (val__)					\
+		: "cc");						\
+	preempt_enable();						\
+	old__ + val__;							\
+})
 
-#define this_cpu_or_1(pcp, val) arch_this_cpu_to_op(pcp, val, |)
-#define this_cpu_or_2(pcp, val) arch_this_cpu_to_op(pcp, val, |)
-#define this_cpu_or_4(pcp, val) arch_this_cpu_to_op(pcp, val, |)
-#define this_cpu_or_8(pcp, val) arch_this_cpu_to_op(pcp, val, |)
+#define this_cpu_add_return_4(pcp, val) arch_this_cpu_add_return(pcp, val, "laa")
+#define this_cpu_add_return_8(pcp, val) arch_this_cpu_add_return(pcp, val, "laag")
 
-#define this_cpu_xor_1(pcp, val) arch_this_cpu_to_op(pcp, val, ^)
-#define this_cpu_xor_2(pcp, val) arch_this_cpu_to_op(pcp, val, ^)
-#define this_cpu_xor_4(pcp, val) arch_this_cpu_to_op(pcp, val, ^)
-#define this_cpu_xor_8(pcp, val) arch_this_cpu_to_op(pcp, val, ^)
+#define arch_this_cpu_to_op(pcp, val, op)				\
+{									\
+	typedef typeof(pcp) pcp_op_T__; 				\
+	pcp_op_T__ val__ = (val);					\
+	pcp_op_T__ old__, *ptr__;					\
+	preempt_disable();						\
+	ptr__ = __this_cpu_ptr(&(pcp)); 				\
+	asm volatile(							\
+		op "    %[old__],%[val__],%[ptr__]\n"			\
+		: [old__] "=d" (old__), [ptr__] "+Q" (*ptr__)		\
+		: [val__] "d" (val__)					\
+		: "cc");						\
+	preempt_enable();						\
+}
+
+#define this_cpu_and_4(pcp, val)	arch_this_cpu_to_op(pcp, val, "lan")
+#define this_cpu_and_8(pcp, val)	arch_this_cpu_to_op(pcp, val, "lang")
+#define this_cpu_or_4(pcp, val)		arch_this_cpu_to_op(pcp, val, "lao")
+#define this_cpu_or_8(pcp, val)		arch_this_cpu_to_op(pcp, val, "laog")
+
+#endif /* CONFIG_HAVE_MARCH_Z196_FEATURES */
 
 #define arch_this_cpu_cmpxchg(pcp, oval, nval)				\
 ({									\
@@ -74,13 +139,7 @@
 	pcp_op_T__ *ptr__;						\
 	preempt_disable();						\
 	ptr__ = __this_cpu_ptr(&(pcp));					\
-	switch (sizeof(*ptr__)) {					\
-	case 8:								\
-		ret__ = cmpxchg64(ptr__, oval, nval);			\
-		break;							\
-	default:							\
-		ret__ = cmpxchg(ptr__, oval, nval);			\
-	}								\
+	ret__ = cmpxchg(ptr__, oval, nval);				\
 	preempt_enable();						\
 	ret__;								\
 })
@@ -104,9 +163,7 @@
 #define this_cpu_xchg_1(pcp, nval) arch_this_cpu_xchg(pcp, nval)
 #define this_cpu_xchg_2(pcp, nval) arch_this_cpu_xchg(pcp, nval)
 #define this_cpu_xchg_4(pcp, nval) arch_this_cpu_xchg(pcp, nval)
-#ifdef CONFIG_64BIT
 #define this_cpu_xchg_8(pcp, nval) arch_this_cpu_xchg(pcp, nval)
-#endif
 
 #define arch_this_cpu_cmpxchg_double(pcp1, pcp2, o1, o2, n1, n2)	\
 ({									\
@@ -124,9 +181,9 @@
 })
 
 #define this_cpu_cmpxchg_double_4 arch_this_cpu_cmpxchg_double
-#ifdef CONFIG_64BIT
 #define this_cpu_cmpxchg_double_8 arch_this_cpu_cmpxchg_double
-#endif
+
+#endif /* CONFIG_64BIT */
 
 #include <asm-generic/percpu.h>
 
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 75fb726..2204400 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -217,63 +217,57 @@ extern unsigned long MODULES_END;
 
 /* Hardware bits in the page table entry */
 #define _PAGE_CO	0x100		/* HW Change-bit override */
-#define _PAGE_RO	0x200		/* HW read-only bit  */
+#define _PAGE_PROTECT	0x200		/* HW read-only bit  */
 #define _PAGE_INVALID	0x400		/* HW invalid bit    */
+#define _PAGE_LARGE	0x800		/* Bit to mark a large pte */
 
 /* Software bits in the page table entry */
-#define _PAGE_SWT	0x001		/* SW pte type bit t */
-#define _PAGE_SWX	0x002		/* SW pte type bit x */
-#define _PAGE_SWC	0x004		/* SW pte changed bit */
-#define _PAGE_SWR	0x008		/* SW pte referenced bit */
-#define _PAGE_SWW	0x010		/* SW pte write bit */
-#define _PAGE_SPECIAL	0x020		/* SW associated with special page */
+#define _PAGE_PRESENT	0x001		/* SW pte present bit */
+#define _PAGE_TYPE	0x002		/* SW pte type bit */
+#define _PAGE_YOUNG	0x004		/* SW pte young bit */
+#define _PAGE_DIRTY	0x008		/* SW pte dirty bit */
+#define _PAGE_READ	0x010		/* SW pte read bit */
+#define _PAGE_WRITE	0x020		/* SW pte write bit */
+#define _PAGE_SPECIAL	0x040		/* SW associated with special page */
 #define __HAVE_ARCH_PTE_SPECIAL
 
 /* Set of bits not changed in pte_modify */
 #define _PAGE_CHG_MASK		(PAGE_MASK | _PAGE_SPECIAL | _PAGE_CO | \
-				 _PAGE_SWC | _PAGE_SWR)
-
-/* Six different types of pages. */
-#define _PAGE_TYPE_EMPTY	0x400
-#define _PAGE_TYPE_NONE		0x401
-#define _PAGE_TYPE_SWAP		0x403
-#define _PAGE_TYPE_FILE		0x601	/* bit 0x002 is used for offset !! */
-#define _PAGE_TYPE_RO		0x200
-#define _PAGE_TYPE_RW		0x000
-
-/*
- * Only four types for huge pages, using the invalid bit and protection bit
- * of a segment table entry.
- */
-#define _HPAGE_TYPE_EMPTY	0x020	/* _SEGMENT_ENTRY_INV */
-#define _HPAGE_TYPE_NONE	0x220
-#define _HPAGE_TYPE_RO		0x200	/* _SEGMENT_ENTRY_RO  */
-#define _HPAGE_TYPE_RW		0x000
+				 _PAGE_DIRTY | _PAGE_YOUNG)
 
 /*
- * PTE type bits are rather complicated. handle_pte_fault uses pte_present,
- * pte_none and pte_file to find out the pte type WITHOUT holding the page
- * table lock. ptep_clear_flush on the other hand uses ptep_clear_flush to
- * invalidate a given pte. ipte sets the hw invalid bit and clears all tlbs
- * for the page. The page table entry is set to _PAGE_TYPE_EMPTY afterwards.
- * This change is done while holding the lock, but the intermediate step
- * of a previously valid pte with the hw invalid bit set can be observed by
- * handle_pte_fault. That makes it necessary that all valid pte types with
- * the hw invalid bit set must be distinguishable from the four pte types
- * empty, none, swap and file.
+ * handle_pte_fault uses pte_present, pte_none and pte_file to find out the
+ * pte type WITHOUT holding the page table lock. The _PAGE_PRESENT bit
+ * is used to distinguish present from not-present ptes. It is changed only
+ * with the page table lock held.
+ *
+ * The following table gives the different possible bit combinations for
+ * the pte hardware and software bits in the last 12 bits of a pte:
  *
- *			irxt  ipte  irxt
- * _PAGE_TYPE_EMPTY	1000   ->   1000
- * _PAGE_TYPE_NONE	1001   ->   1001
- * _PAGE_TYPE_SWAP	1011   ->   1011
- * _PAGE_TYPE_FILE	11?1   ->   11?1
- * _PAGE_TYPE_RO	0100   ->   1100
- * _PAGE_TYPE_RW	0000   ->   1000
+ *				842100000000
+ *				000084210000
+ *				000000008421
+ *				.IR...wrdytp
+ * empty			.10...000000
+ * swap				.10...xxxx10
+ * file				.11...xxxxx0
+ * prot-none, clean, old	.11...000001
+ * prot-none, clean, young	.11...000101
+ * prot-none, dirty, old	.10...001001
+ * prot-none, dirty, young	.10...001101
+ * read-only, clean, old	.11...010001
+ * read-only, clean, young	.01...010101
+ * read-only, dirty, old	.11...011001
+ * read-only, dirty, young	.01...011101
+ * read-write, clean, old	.11...110001
+ * read-write, clean, young	.01...110101
+ * read-write, dirty, old	.10...111001
+ * read-write, dirty, young	.00...111101
  *
- * pte_none is true for bits combinations 1000, 1010, 1100, 1110
- * pte_present is true for bits combinations 0000, 0010, 0100, 0110, 1001
- * pte_file is true for bits combinations 1101, 1111
- * swap pte is 1011 and 0001, 0011, 0101, 0111 are invalid.
+ * pte_present is true for the bit pattern .xx...xxxxx1, (pte & 0x001) == 0x001
+ * pte_none    is true for the bit pattern .10...xxxx00, (pte & 0x603) == 0x400
+ * pte_file    is true for the bit pattern .11...xxxxx0, (pte & 0x601) == 0x600
+ * pte_swap    is true for the bit pattern .10...xxxx10, (pte & 0x603) == 0x402
  */
 
 #ifndef CONFIG_64BIT
@@ -286,14 +280,25 @@ extern unsigned long MODULES_END;
 #define _ASCE_TABLE_LENGTH	0x7f	/* 128 x 64 entries = 8k	    */
 
 /* Bits in the segment table entry */
+#define _SEGMENT_ENTRY_BITS	0x7fffffffUL	/* Valid segment table bits */
 #define _SEGMENT_ENTRY_ORIGIN	0x7fffffc0UL	/* page table origin	    */
-#define _SEGMENT_ENTRY_RO	0x200	/* page protection bit		    */
-#define _SEGMENT_ENTRY_INV	0x20	/* invalid segment table entry	    */
+#define _SEGMENT_ENTRY_PROTECT	0x200	/* page protection bit		    */
+#define _SEGMENT_ENTRY_INVALID	0x20	/* invalid segment table entry	    */
 #define _SEGMENT_ENTRY_COMMON	0x10	/* common segment bit		    */
 #define _SEGMENT_ENTRY_PTL	0x0f	/* page table length		    */
+#define _SEGMENT_ENTRY_NONE	_SEGMENT_ENTRY_PROTECT
 
 #define _SEGMENT_ENTRY		(_SEGMENT_ENTRY_PTL)
-#define _SEGMENT_ENTRY_EMPTY	(_SEGMENT_ENTRY_INV)
+#define _SEGMENT_ENTRY_EMPTY	(_SEGMENT_ENTRY_INVALID)
+
+/*
+ * Segment table entry encoding (I = invalid, R = read-only bit):
+ *		..R...I.....
+ * prot-none	..1...1.....
+ * read-only	..1...0.....
+ * read-write	..0...0.....
+ * empty	..0...1.....
+ */
 
 /* Page status table bits for virtualization */
 #define PGSTE_ACC_BITS	0xf0000000UL
@@ -303,9 +308,7 @@ extern unsigned long MODULES_END;
 #define PGSTE_HC_BIT	0x00200000UL
 #define PGSTE_GR_BIT	0x00040000UL
 #define PGSTE_GC_BIT	0x00020000UL
-#define PGSTE_UR_BIT	0x00008000UL
-#define PGSTE_UC_BIT	0x00004000UL	/* user dirty (migration) */
-#define PGSTE_IN_BIT	0x00002000UL	/* IPTE notify bit */
+#define PGSTE_IN_BIT	0x00008000UL	/* IPTE notify bit */
 
 #else /* CONFIG_64BIT */
 
@@ -324,8 +327,8 @@ extern unsigned long MODULES_END;
 
 /* Bits in the region table entry */
 #define _REGION_ENTRY_ORIGIN	~0xfffUL/* region/segment table origin	    */
-#define _REGION_ENTRY_RO	0x200	/* region protection bit	    */
-#define _REGION_ENTRY_INV	0x20	/* invalid region table entry	    */
+#define _REGION_ENTRY_PROTECT	0x200	/* region protection bit	    */
+#define _REGION_ENTRY_INVALID	0x20	/* invalid region table entry	    */
 #define _REGION_ENTRY_TYPE_MASK	0x0c	/* region/segment table type mask   */
 #define _REGION_ENTRY_TYPE_R1	0x0c	/* region first table type	    */
 #define _REGION_ENTRY_TYPE_R2	0x08	/* region second table type	    */
@@ -333,29 +336,47 @@ extern unsigned long MODULES_END;
 #define _REGION_ENTRY_LENGTH	0x03	/* region third length		    */
 
 #define _REGION1_ENTRY		(_REGION_ENTRY_TYPE_R1 | _REGION_ENTRY_LENGTH)
-#define _REGION1_ENTRY_EMPTY	(_REGION_ENTRY_TYPE_R1 | _REGION_ENTRY_INV)
+#define _REGION1_ENTRY_EMPTY	(_REGION_ENTRY_TYPE_R1 | _REGION_ENTRY_INVALID)
 #define _REGION2_ENTRY		(_REGION_ENTRY_TYPE_R2 | _REGION_ENTRY_LENGTH)
-#define _REGION2_ENTRY_EMPTY	(_REGION_ENTRY_TYPE_R2 | _REGION_ENTRY_INV)
+#define _REGION2_ENTRY_EMPTY	(_REGION_ENTRY_TYPE_R2 | _REGION_ENTRY_INVALID)
 #define _REGION3_ENTRY		(_REGION_ENTRY_TYPE_R3 | _REGION_ENTRY_LENGTH)
-#define _REGION3_ENTRY_EMPTY	(_REGION_ENTRY_TYPE_R3 | _REGION_ENTRY_INV)
+#define _REGION3_ENTRY_EMPTY	(_REGION_ENTRY_TYPE_R3 | _REGION_ENTRY_INVALID)
 
 #define _REGION3_ENTRY_LARGE	0x400	/* RTTE-format control, large page  */
 #define _REGION3_ENTRY_RO	0x200	/* page protection bit		    */
 #define _REGION3_ENTRY_CO	0x100	/* change-recording override	    */
 
 /* Bits in the segment table entry */
+#define _SEGMENT_ENTRY_BITS	0xfffffffffffffe33UL
+#define _SEGMENT_ENTRY_BITS_LARGE 0xfffffffffff1ff33UL
 #define _SEGMENT_ENTRY_ORIGIN_LARGE ~0xfffffUL /* large page address	    */
 #define _SEGMENT_ENTRY_ORIGIN	~0x7ffUL/* segment table origin		    */
-#define _SEGMENT_ENTRY_RO	0x200	/* page protection bit		    */
-#define _SEGMENT_ENTRY_INV	0x20	/* invalid segment table entry	    */
+#define _SEGMENT_ENTRY_PROTECT	0x200	/* page protection bit		    */
+#define _SEGMENT_ENTRY_INVALID	0x20	/* invalid segment table entry	    */
 
 #define _SEGMENT_ENTRY		(0)
-#define _SEGMENT_ENTRY_EMPTY	(_SEGMENT_ENTRY_INV)
+#define _SEGMENT_ENTRY_EMPTY	(_SEGMENT_ENTRY_INVALID)
 
 #define _SEGMENT_ENTRY_LARGE	0x400	/* STE-format control, large page   */
 #define _SEGMENT_ENTRY_CO	0x100	/* change-recording override   */
+#define _SEGMENT_ENTRY_SPLIT	0x001	/* THP splitting bit */
+#define _SEGMENT_ENTRY_YOUNG	0x002	/* SW segment young bit */
+#define _SEGMENT_ENTRY_NONE	_SEGMENT_ENTRY_YOUNG
+
+/*
+ * Segment table entry encoding (R = read-only, I = invalid, y = young bit):
+ *			..R...I...y.
+ * prot-none, old	..0...1...1.
+ * prot-none, young	..1...1...1.
+ * read-only, old	..1...1...0.
+ * read-only, young	..1...0...1.
+ * read-write, old	..0...1...0.
+ * read-write, young	..0...0...1.
+ * The segment table origin is used to distinguish empty (origin==0) from
+ * read-write, old segment table entries (origin!=0)
+ */
+
 #define _SEGMENT_ENTRY_SPLIT_BIT 0	/* THP splitting bit number */
-#define _SEGMENT_ENTRY_SPLIT	(1UL << _SEGMENT_ENTRY_SPLIT_BIT)
 
 /* Set of bits not changed in pmd_modify */
 #define _SEGMENT_CHG_MASK	(_SEGMENT_ENTRY_ORIGIN | _SEGMENT_ENTRY_LARGE \
@@ -369,9 +390,7 @@ extern unsigned long MODULES_END;
 #define PGSTE_HC_BIT	0x0020000000000000UL
 #define PGSTE_GR_BIT	0x0004000000000000UL
 #define PGSTE_GC_BIT	0x0002000000000000UL
-#define PGSTE_UR_BIT	0x0000800000000000UL
-#define PGSTE_UC_BIT	0x0000400000000000UL	/* user dirty (migration) */
-#define PGSTE_IN_BIT	0x0000200000000000UL	/* IPTE notify bit */
+#define PGSTE_IN_BIT	0x0000800000000000UL	/* IPTE notify bit */
 
 #endif /* CONFIG_64BIT */
 
@@ -386,14 +405,18 @@ extern unsigned long MODULES_END;
 /*
  * Page protection definitions.
  */
-#define PAGE_NONE	__pgprot(_PAGE_TYPE_NONE)
-#define PAGE_RO		__pgprot(_PAGE_TYPE_RO)
-#define PAGE_RW		__pgprot(_PAGE_TYPE_RO | _PAGE_SWW)
-#define PAGE_RWC	__pgprot(_PAGE_TYPE_RW | _PAGE_SWW | _PAGE_SWC)
-
-#define PAGE_KERNEL	PAGE_RWC
-#define PAGE_SHARED	PAGE_KERNEL
-#define PAGE_COPY	PAGE_RO
+#define PAGE_NONE	__pgprot(_PAGE_PRESENT | _PAGE_INVALID)
+#define PAGE_READ	__pgprot(_PAGE_PRESENT | _PAGE_READ | \
+				 _PAGE_INVALID | _PAGE_PROTECT)
+#define PAGE_WRITE	__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
+				 _PAGE_INVALID | _PAGE_PROTECT)
+
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
+				 _PAGE_YOUNG | _PAGE_DIRTY)
+#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
+				 _PAGE_YOUNG | _PAGE_DIRTY)
+#define PAGE_KERNEL_RO	__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_YOUNG | \
+				 _PAGE_PROTECT)
 
 /*
  * On s390 the page table entry has an invalid bit and a read-only bit.
@@ -402,35 +425,31 @@ extern unsigned long MODULES_END;
  */
          /*xwr*/
 #define __P000	PAGE_NONE
-#define __P001	PAGE_RO
-#define __P010	PAGE_RO
-#define __P011	PAGE_RO
-#define __P100	PAGE_RO
-#define __P101	PAGE_RO
-#define __P110	PAGE_RO
-#define __P111	PAGE_RO
+#define __P001	PAGE_READ
+#define __P010	PAGE_READ
+#define __P011	PAGE_READ
+#define __P100	PAGE_READ
+#define __P101	PAGE_READ
+#define __P110	PAGE_READ
+#define __P111	PAGE_READ
 
 #define __S000	PAGE_NONE
-#define __S001	PAGE_RO
-#define __S010	PAGE_RW
-#define __S011	PAGE_RW
-#define __S100	PAGE_RO
-#define __S101	PAGE_RO
-#define __S110	PAGE_RW
-#define __S111	PAGE_RW
+#define __S001	PAGE_READ
+#define __S010	PAGE_WRITE
+#define __S011	PAGE_WRITE
+#define __S100	PAGE_READ
+#define __S101	PAGE_READ
+#define __S110	PAGE_WRITE
+#define __S111	PAGE_WRITE
 
 /*
  * Segment entry (large page) protection definitions.
  */
-#define SEGMENT_NONE	__pgprot(_HPAGE_TYPE_NONE)
-#define SEGMENT_RO	__pgprot(_HPAGE_TYPE_RO)
-#define SEGMENT_RW	__pgprot(_HPAGE_TYPE_RW)
-
-static inline int mm_exclusive(struct mm_struct *mm)
-{
-	return likely(mm == current->active_mm &&
-		      atomic_read(&mm->context.attach_count) <= 1);
-}
+#define SEGMENT_NONE	__pgprot(_SEGMENT_ENTRY_INVALID | \
+				 _SEGMENT_ENTRY_NONE)
+#define SEGMENT_READ	__pgprot(_SEGMENT_ENTRY_INVALID | \
+				 _SEGMENT_ENTRY_PROTECT)
+#define SEGMENT_WRITE	__pgprot(_SEGMENT_ENTRY_INVALID)
 
 static inline int mm_has_pgste(struct mm_struct *mm)
 {
@@ -467,7 +486,7 @@ static inline int pgd_none(pgd_t pgd)
 {
 	if ((pgd_val(pgd) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R2)
 		return 0;
-	return (pgd_val(pgd) & _REGION_ENTRY_INV) != 0UL;
+	return (pgd_val(pgd) & _REGION_ENTRY_INVALID) != 0UL;
 }
 
 static inline int pgd_bad(pgd_t pgd)
@@ -478,7 +497,7 @@ static inline int pgd_bad(pgd_t pgd)
 	 * invalid for either table entry.
 	 */
 	unsigned long mask =
-		~_SEGMENT_ENTRY_ORIGIN & ~_REGION_ENTRY_INV &
+		~_SEGMENT_ENTRY_ORIGIN & ~_REGION_ENTRY_INVALID &
 		~_REGION_ENTRY_TYPE_MASK & ~_REGION_ENTRY_LENGTH;
 	return (pgd_val(pgd) & mask) != 0;
 }
@@ -494,7 +513,7 @@ static inline int pud_none(pud_t pud)
 {
 	if ((pud_val(pud) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R3)
 		return 0;
-	return (pud_val(pud) & _REGION_ENTRY_INV) != 0UL;
+	return (pud_val(pud) & _REGION_ENTRY_INVALID) != 0UL;
 }
 
 static inline int pud_large(pud_t pud)
@@ -512,7 +531,7 @@ static inline int pud_bad(pud_t pud)
 	 * invalid for either table entry.
 	 */
 	unsigned long mask =
-		~_SEGMENT_ENTRY_ORIGIN & ~_REGION_ENTRY_INV &
+		~_SEGMENT_ENTRY_ORIGIN & ~_REGION_ENTRY_INVALID &
 		~_REGION_ENTRY_TYPE_MASK & ~_REGION_ENTRY_LENGTH;
 	return (pud_val(pud) & mask) != 0;
 }
@@ -521,30 +540,36 @@ static inline int pud_bad(pud_t pud)
 
 static inline int pmd_present(pmd_t pmd)
 {
-	unsigned long mask = _SEGMENT_ENTRY_INV | _SEGMENT_ENTRY_RO;
-	return (pmd_val(pmd) & mask) == _HPAGE_TYPE_NONE ||
-	       !(pmd_val(pmd) & _SEGMENT_ENTRY_INV);
+	return pmd_val(pmd) != _SEGMENT_ENTRY_INVALID;
 }
 
 static inline int pmd_none(pmd_t pmd)
 {
-	return (pmd_val(pmd) & _SEGMENT_ENTRY_INV) &&
-	       !(pmd_val(pmd) & _SEGMENT_ENTRY_RO);
+	return pmd_val(pmd) == _SEGMENT_ENTRY_INVALID;
 }
 
 static inline int pmd_large(pmd_t pmd)
 {
 #ifdef CONFIG_64BIT
-	return !!(pmd_val(pmd) & _SEGMENT_ENTRY_LARGE);
+	return (pmd_val(pmd) & _SEGMENT_ENTRY_LARGE) != 0;
 #else
 	return 0;
 #endif
 }
 
+static inline int pmd_prot_none(pmd_t pmd)
+{
+	return (pmd_val(pmd) & _SEGMENT_ENTRY_INVALID) &&
+		(pmd_val(pmd) & _SEGMENT_ENTRY_NONE);
+}
+
 static inline int pmd_bad(pmd_t pmd)
 {
-	unsigned long mask = ~_SEGMENT_ENTRY_ORIGIN & ~_SEGMENT_ENTRY_INV;
-	return (pmd_val(pmd) & mask) != _SEGMENT_ENTRY;
+#ifdef CONFIG_64BIT
+	if (pmd_large(pmd))
+		return (pmd_val(pmd) & ~_SEGMENT_ENTRY_BITS_LARGE) != 0;
+#endif
+	return (pmd_val(pmd) & ~_SEGMENT_ENTRY_BITS) != 0;
 }
 
 #define __HAVE_ARCH_PMDP_SPLITTING_FLUSH
@@ -563,31 +588,40 @@ extern int pmdp_clear_flush_young(struct vm_area_struct *vma,
 #define __HAVE_ARCH_PMD_WRITE
 static inline int pmd_write(pmd_t pmd)
 {
-	return (pmd_val(pmd) & _SEGMENT_ENTRY_RO) == 0;
+	if (pmd_prot_none(pmd))
+		return 0;
+	return (pmd_val(pmd) & _SEGMENT_ENTRY_PROTECT) == 0;
 }
 
 static inline int pmd_young(pmd_t pmd)
 {
-	return 0;
+	int young = 0;
+#ifdef CONFIG_64BIT
+	if (pmd_prot_none(pmd))
+		young = (pmd_val(pmd) & _SEGMENT_ENTRY_PROTECT) != 0;
+	else
+		young = (pmd_val(pmd) & _SEGMENT_ENTRY_YOUNG) != 0;
+#endif
+	return young;
 }
 
-static inline int pte_none(pte_t pte)
+static inline int pte_present(pte_t pte)
 {
-	return (pte_val(pte) & _PAGE_INVALID) && !(pte_val(pte) & _PAGE_SWT);
+	/* Bit pattern: (pte & 0x001) == 0x001 */
+	return (pte_val(pte) & _PAGE_PRESENT) != 0;
 }
 
-static inline int pte_present(pte_t pte)
+static inline int pte_none(pte_t pte)
 {
-	unsigned long mask = _PAGE_RO | _PAGE_INVALID | _PAGE_SWT | _PAGE_SWX;
-	return (pte_val(pte) & mask) == _PAGE_TYPE_NONE ||
-		(!(pte_val(pte) & _PAGE_INVALID) &&
-		 !(pte_val(pte) & _PAGE_SWT));
+	/* Bit pattern: pte == 0x400 */
+	return pte_val(pte) == _PAGE_INVALID;
 }
 
 static inline int pte_file(pte_t pte)
 {
-	unsigned long mask = _PAGE_RO | _PAGE_INVALID | _PAGE_SWT;
-	return (pte_val(pte) & mask) == _PAGE_TYPE_FILE;
+	/* Bit pattern: (pte & 0x601) == 0x600 */
+	return (pte_val(pte) & (_PAGE_INVALID | _PAGE_PROTECT | _PAGE_PRESENT))
+		== (_PAGE_INVALID | _PAGE_PROTECT);
 }
 
 static inline int pte_special(pte_t pte)
@@ -634,6 +668,15 @@ static inline void pgste_set_unlock(pte_t *ptep, pgste_t pgste)
 #endif
 }
 
+static inline pgste_t pgste_get(pte_t *ptep)
+{
+	unsigned long pgste = 0;
+#ifdef CONFIG_PGSTE
+	pgste = *(unsigned long *)(ptep + PTRS_PER_PTE);
+#endif
+	return __pgste(pgste);
+}
+
 static inline void pgste_set(pte_t *ptep, pgste_t pgste)
 {
 #ifdef CONFIG_PGSTE
@@ -644,33 +687,28 @@ static inline void pgste_set(pte_t *ptep, pgste_t pgste)
 static inline pgste_t pgste_update_all(pte_t *ptep, pgste_t pgste)
 {
 #ifdef CONFIG_PGSTE
-	unsigned long address, bits;
-	unsigned char skey;
+	unsigned long address, bits, skey;
 
 	if (pte_val(*ptep) & _PAGE_INVALID)
 		return pgste;
 	address = pte_val(*ptep) & PAGE_MASK;
-	skey = page_get_storage_key(address);
+	skey = (unsigned long) page_get_storage_key(address);
 	bits = skey & (_PAGE_CHANGED | _PAGE_REFERENCED);
-	/* Clear page changed & referenced bit in the storage key */
-	if (bits & _PAGE_CHANGED)
+	if (!(pgste_val(pgste) & PGSTE_HC_BIT) && (bits & _PAGE_CHANGED)) {
+		/* Transfer dirty + referenced bit to host bits in pgste */
+		pgste_val(pgste) |= bits << 52;
 		page_set_storage_key(address, skey ^ bits, 0);
-	else if (bits)
+	} else if (!(pgste_val(pgste) & PGSTE_HR_BIT) &&
+		   (bits & _PAGE_REFERENCED)) {
+		/* Transfer referenced bit to host bit in pgste */
+		pgste_val(pgste) |= PGSTE_HR_BIT;
 		page_reset_referenced(address);
+	}
 	/* Transfer page changed & referenced bit to guest bits in pgste */
 	pgste_val(pgste) |= bits << 48;		/* GR bit & GC bit */
-	/* Get host changed & referenced bits from pgste */
-	bits |= (pgste_val(pgste) & (PGSTE_HR_BIT | PGSTE_HC_BIT)) >> 52;
-	/* Transfer page changed & referenced bit to kvm user bits */
-	pgste_val(pgste) |= bits << 45;		/* PGSTE_UR_BIT & PGSTE_UC_BIT */
-	/* Clear relevant host bits in pgste. */
-	pgste_val(pgste) &= ~(PGSTE_HR_BIT | PGSTE_HC_BIT);
-	pgste_val(pgste) &= ~(PGSTE_ACC_BITS | PGSTE_FP_BIT);
 	/* Copy page access key and fetch protection bit to pgste */
-	pgste_val(pgste) |=
-		(unsigned long) (skey & (_PAGE_ACC_BITS | _PAGE_FP_BIT)) << 56;
-	/* Transfer referenced bit to pte */
-	pte_val(*ptep) |= (bits & _PAGE_REFERENCED) << 1;
+	pgste_val(pgste) &= ~(PGSTE_ACC_BITS | PGSTE_FP_BIT);
+	pgste_val(pgste) |= (skey & (_PAGE_ACC_BITS | _PAGE_FP_BIT)) << 56;
 #endif
 	return pgste;
 
@@ -679,24 +717,11 @@ static inline pgste_t pgste_update_all(pte_t *ptep, pgste_t pgste)
 static inline pgste_t pgste_update_young(pte_t *ptep, pgste_t pgste)
 {
 #ifdef CONFIG_PGSTE
-	int young;
-
 	if (pte_val(*ptep) & _PAGE_INVALID)
 		return pgste;
 	/* Get referenced bit from storage key */
-	young = page_reset_referenced(pte_val(*ptep) & PAGE_MASK);
-	if (young)
-		pgste_val(pgste) |= PGSTE_GR_BIT;
-	/* Get host referenced bit from pgste */
-	if (pgste_val(pgste) & PGSTE_HR_BIT) {
-		pgste_val(pgste) &= ~PGSTE_HR_BIT;
-		young = 1;
-	}
-	/* Transfer referenced bit to kvm user bits and pte */
-	if (young) {
-		pgste_val(pgste) |= PGSTE_UR_BIT;
-		pte_val(*ptep) |= _PAGE_SWR;
-	}
+	if (page_reset_referenced(pte_val(*ptep) & PAGE_MASK))
+		pgste_val(pgste) |= PGSTE_HR_BIT | PGSTE_GR_BIT;
 #endif
 	return pgste;
 }
@@ -723,13 +748,15 @@ static inline void pgste_set_key(pte_t *ptep, pgste_t pgste, pte_t entry)
 
 static inline void pgste_set_pte(pte_t *ptep, pte_t entry)
 {
-	if (!MACHINE_HAS_ESOP && (pte_val(entry) & _PAGE_SWW)) {
+	if (!MACHINE_HAS_ESOP &&
+	    (pte_val(entry) & _PAGE_PRESENT) &&
+	    (pte_val(entry) & _PAGE_WRITE)) {
 		/*
 		 * Without enhanced suppression-on-protection force
 		 * the dirty bit on for all writable ptes.
 		 */
-		pte_val(entry) |= _PAGE_SWC;
-		pte_val(entry) &= ~_PAGE_RO;
+		pte_val(entry) |= _PAGE_DIRTY;
+		pte_val(entry) &= ~_PAGE_PROTECT;
 	}
 	*ptep = entry;
 }
@@ -841,21 +868,17 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
  */
 static inline int pte_write(pte_t pte)
 {
-	return (pte_val(pte) & _PAGE_SWW) != 0;
+	return (pte_val(pte) & _PAGE_WRITE) != 0;
 }
 
 static inline int pte_dirty(pte_t pte)
 {
-	return (pte_val(pte) & _PAGE_SWC) != 0;
+	return (pte_val(pte) & _PAGE_DIRTY) != 0;
 }
 
 static inline int pte_young(pte_t pte)
 {
-#ifdef CONFIG_PGSTE
-	if (pte_val(pte) & _PAGE_SWR)
-		return 1;
-#endif
-	return 0;
+	return (pte_val(pte) & _PAGE_YOUNG) != 0;
 }
 
 /*
@@ -880,12 +903,12 @@ static inline void pud_clear(pud_t *pud)
 
 static inline void pmd_clear(pmd_t *pmdp)
 {
-	pmd_val(*pmdp) = _SEGMENT_ENTRY_EMPTY;
+	pmd_val(*pmdp) = _SEGMENT_ENTRY_INVALID;
 }
 
 static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
-	pte_val(*ptep) = _PAGE_TYPE_EMPTY;
+	pte_val(*ptep) = _PAGE_INVALID;
 }
 
 /*
@@ -896,55 +919,63 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
 	pte_val(pte) &= _PAGE_CHG_MASK;
 	pte_val(pte) |= pgprot_val(newprot);
-	if ((pte_val(pte) & _PAGE_SWC) && (pte_val(pte) & _PAGE_SWW))
-		pte_val(pte) &= ~_PAGE_RO;
+	/*
+	 * newprot for PAGE_NONE, PAGE_READ and PAGE_WRITE has the
+	 * invalid bit set, clear it again for readable, young pages
+	 */
+	if ((pte_val(pte) & _PAGE_YOUNG) && (pte_val(pte) & _PAGE_READ))
+		pte_val(pte) &= ~_PAGE_INVALID;
+	/*
+	 * newprot for PAGE_READ and PAGE_WRITE has the page protection
+	 * bit set, clear it again for writable, dirty pages
+	 */
+	if ((pte_val(pte) & _PAGE_DIRTY) && (pte_val(pte) & _PAGE_WRITE))
+		pte_val(pte) &= ~_PAGE_PROTECT;
 	return pte;
 }
 
 static inline pte_t pte_wrprotect(pte_t pte)
 {
-	pte_val(pte) &= ~_PAGE_SWW;
-	/* Do not clobber _PAGE_TYPE_NONE pages!  */
-	if (!(pte_val(pte) & _PAGE_INVALID))
-		pte_val(pte) |= _PAGE_RO;
+	pte_val(pte) &= ~_PAGE_WRITE;
+	pte_val(pte) |= _PAGE_PROTECT;
 	return pte;
 }
 
 static inline pte_t pte_mkwrite(pte_t pte)
 {
-	pte_val(pte) |= _PAGE_SWW;
-	if (pte_val(pte) & _PAGE_SWC)
-		pte_val(pte) &= ~_PAGE_RO;
+	pte_val(pte) |= _PAGE_WRITE;
+	if (pte_val(pte) & _PAGE_DIRTY)
+		pte_val(pte) &= ~_PAGE_PROTECT;
 	return pte;
 }
 
 static inline pte_t pte_mkclean(pte_t pte)
 {
-	pte_val(pte) &= ~_PAGE_SWC;
-	/* Do not clobber _PAGE_TYPE_NONE pages!  */
-	if (!(pte_val(pte) & _PAGE_INVALID))
-		pte_val(pte) |= _PAGE_RO;
+	pte_val(pte) &= ~_PAGE_DIRTY;
+	pte_val(pte) |= _PAGE_PROTECT;
 	return pte;
 }
 
 static inline pte_t pte_mkdirty(pte_t pte)
 {
-	pte_val(pte) |= _PAGE_SWC;
-	if (pte_val(pte) & _PAGE_SWW)
-		pte_val(pte) &= ~_PAGE_RO;
+	pte_val(pte) |= _PAGE_DIRTY;
+	if (pte_val(pte) & _PAGE_WRITE)
+		pte_val(pte) &= ~_PAGE_PROTECT;
 	return pte;
 }
 
 static inline pte_t pte_mkold(pte_t pte)
 {
-#ifdef CONFIG_PGSTE
-	pte_val(pte) &= ~_PAGE_SWR;
-#endif
+	pte_val(pte) &= ~_PAGE_YOUNG;
+	pte_val(pte) |= _PAGE_INVALID;
 	return pte;
 }
 
 static inline pte_t pte_mkyoung(pte_t pte)
 {
+	pte_val(pte) |= _PAGE_YOUNG;
+	if (pte_val(pte) & _PAGE_READ)
+		pte_val(pte) &= ~_PAGE_INVALID;
 	return pte;
 }
 
@@ -957,7 +988,7 @@ static inline pte_t pte_mkspecial(pte_t pte)
 #ifdef CONFIG_HUGETLB_PAGE
 static inline pte_t pte_mkhuge(pte_t pte)
 {
-	pte_val(pte) |= (_SEGMENT_ENTRY_LARGE | _SEGMENT_ENTRY_CO);
+	pte_val(pte) |= _PAGE_LARGE;
 	return pte;
 }
 #endif
@@ -974,8 +1005,8 @@ static inline int ptep_test_and_clear_user_dirty(struct mm_struct *mm,
 	if (mm_has_pgste(mm)) {
 		pgste = pgste_get_lock(ptep);
 		pgste = pgste_update_all(ptep, pgste);
-		dirty = !!(pgste_val(pgste) & PGSTE_UC_BIT);
-		pgste_val(pgste) &= ~PGSTE_UC_BIT;
+		dirty = !!(pgste_val(pgste) & PGSTE_HC_BIT);
+		pgste_val(pgste) &= ~PGSTE_HC_BIT;
 		pgste_set_unlock(ptep, pgste);
 		return dirty;
 	}
@@ -994,59 +1025,75 @@ static inline int ptep_test_and_clear_user_young(struct mm_struct *mm,
 	if (mm_has_pgste(mm)) {
 		pgste = pgste_get_lock(ptep);
 		pgste = pgste_update_young(ptep, pgste);
-		young = !!(pgste_val(pgste) & PGSTE_UR_BIT);
-		pgste_val(pgste) &= ~PGSTE_UR_BIT;
+		young = !!(pgste_val(pgste) & PGSTE_HR_BIT);
+		pgste_val(pgste) &= ~PGSTE_HR_BIT;
 		pgste_set_unlock(ptep, pgste);
 	}
 	return young;
 }
 
+static inline void __ptep_ipte(unsigned long address, pte_t *ptep)
+{
+	if (!(pte_val(*ptep) & _PAGE_INVALID)) {
+#ifndef CONFIG_64BIT
+		/* pto must point to the start of the segment table */
+		pte_t *pto = (pte_t *) (((unsigned long) ptep) & 0x7ffffc00);
+#else
+		/* ipte in zarch mode can do the math */
+		pte_t *pto = ptep;
+#endif
+		asm volatile(
+			"	ipte	%2,%3"
+			: "=m" (*ptep) : "m" (*ptep),
+			  "a" (pto), "a" (address));
+	}
+}
+
+static inline void ptep_flush_lazy(struct mm_struct *mm,
+				   unsigned long address, pte_t *ptep)
+{
+	int active = (mm == current->active_mm) ? 1 : 0;
+
+	if (atomic_read(&mm->context.attach_count) > active)
+		__ptep_ipte(address, ptep);
+	else
+		mm->context.flush_mm = 1;
+}
+
 #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
 static inline int ptep_test_and_clear_young(struct vm_area_struct *vma,
 					    unsigned long addr, pte_t *ptep)
 {
 	pgste_t pgste;
 	pte_t pte;
+	int young;
 
 	if (mm_has_pgste(vma->vm_mm)) {
 		pgste = pgste_get_lock(ptep);
-		pgste = pgste_update_young(ptep, pgste);
-		pte = *ptep;
-		*ptep = pte_mkold(pte);
-		pgste_set_unlock(ptep, pgste);
-		return pte_young(pte);
+		pgste = pgste_ipte_notify(vma->vm_mm, addr, ptep, pgste);
 	}
-	return 0;
+
+	pte = *ptep;
+	__ptep_ipte(addr, ptep);
+	young = pte_young(pte);
+	pte = pte_mkold(pte);
+
+	if (mm_has_pgste(vma->vm_mm)) {
+		pgste_set_pte(ptep, pte);
+		pgste_set_unlock(ptep, pgste);
+	} else
+		*ptep = pte;
+
+	return young;
 }
 
 #define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
 static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
 					 unsigned long address, pte_t *ptep)
 {
-	/* No need to flush TLB
-	 * On s390 reference bits are in storage key and never in TLB
-	 * With virtualization we handle the reference bit, without we
-	 * we can simply return */
 	return ptep_test_and_clear_young(vma, address, ptep);
 }
 
-static inline void __ptep_ipte(unsigned long address, pte_t *ptep)
-{
-	if (!(pte_val(*ptep) & _PAGE_INVALID)) {
-#ifndef CONFIG_64BIT
-		/* pto must point to the start of the segment table */
-		pte_t *pto = (pte_t *) (((unsigned long) ptep) & 0x7ffffc00);
-#else
-		/* ipte in zarch mode can do the math */
-		pte_t *pto = ptep;
-#endif
-		asm volatile(
-			"	ipte	%2,%3"
-			: "=m" (*ptep) : "m" (*ptep),
-			  "a" (pto), "a" (address));
-	}
-}
-
 /*
  * This is hard to understand. ptep_get_and_clear and ptep_clear_flush
  * both clear the TLB for the unmapped pte. The reason is that
@@ -1067,16 +1114,14 @@ static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
 	pgste_t pgste;
 	pte_t pte;
 
-	mm->context.flush_mm = 1;
 	if (mm_has_pgste(mm)) {
 		pgste = pgste_get_lock(ptep);
 		pgste = pgste_ipte_notify(mm, address, ptep, pgste);
 	}
 
 	pte = *ptep;
-	if (!mm_exclusive(mm))
-		__ptep_ipte(address, ptep);
-	pte_val(*ptep) = _PAGE_TYPE_EMPTY;
+	ptep_flush_lazy(mm, address, ptep);
+	pte_val(*ptep) = _PAGE_INVALID;
 
 	if (mm_has_pgste(mm)) {
 		pgste = pgste_update_all(&pte, pgste);
@@ -1093,15 +1138,14 @@ static inline pte_t ptep_modify_prot_start(struct mm_struct *mm,
 	pgste_t pgste;
 	pte_t pte;
 
-	mm->context.flush_mm = 1;
 	if (mm_has_pgste(mm)) {
 		pgste = pgste_get_lock(ptep);
 		pgste_ipte_notify(mm, address, ptep, pgste);
 	}
 
 	pte = *ptep;
-	if (!mm_exclusive(mm))
-		__ptep_ipte(address, ptep);
+	ptep_flush_lazy(mm, address, ptep);
+	pte_val(*ptep) |= _PAGE_INVALID;
 
 	if (mm_has_pgste(mm)) {
 		pgste = pgste_update_all(&pte, pgste);
@@ -1117,7 +1161,7 @@ static inline void ptep_modify_prot_commit(struct mm_struct *mm,
 	pgste_t pgste;
 
 	if (mm_has_pgste(mm)) {
-		pgste = *(pgste_t *)(ptep + PTRS_PER_PTE);
+		pgste = pgste_get(ptep);
 		pgste_set_key(ptep, pgste, pte);
 		pgste_set_pte(ptep, pte);
 		pgste_set_unlock(ptep, pgste);
@@ -1139,7 +1183,7 @@ static inline pte_t ptep_clear_flush(struct vm_area_struct *vma,
 
 	pte = *ptep;
 	__ptep_ipte(address, ptep);
-	pte_val(*ptep) = _PAGE_TYPE_EMPTY;
+	pte_val(*ptep) = _PAGE_INVALID;
 
 	if (mm_has_pgste(vma->vm_mm)) {
 		pgste = pgste_update_all(&pte, pgste);
@@ -1163,18 +1207,17 @@ static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm,
 	pgste_t pgste;
 	pte_t pte;
 
-	if (mm_has_pgste(mm)) {
+	if (!full && mm_has_pgste(mm)) {
 		pgste = pgste_get_lock(ptep);
-		if (!full)
-			pgste = pgste_ipte_notify(mm, address, ptep, pgste);
+		pgste = pgste_ipte_notify(mm, address, ptep, pgste);
 	}
 
 	pte = *ptep;
 	if (!full)
-		__ptep_ipte(address, ptep);
-	pte_val(*ptep) = _PAGE_TYPE_EMPTY;
+		ptep_flush_lazy(mm, address, ptep);
+	pte_val(*ptep) = _PAGE_INVALID;
 
-	if (mm_has_pgste(mm)) {
+	if (!full && mm_has_pgste(mm)) {
 		pgste = pgste_update_all(&pte, pgste);
 		pgste_set_unlock(ptep, pgste);
 	}
@@ -1189,14 +1232,12 @@ static inline pte_t ptep_set_wrprotect(struct mm_struct *mm,
 	pte_t pte = *ptep;
 
 	if (pte_write(pte)) {
-		mm->context.flush_mm = 1;
 		if (mm_has_pgste(mm)) {
 			pgste = pgste_get_lock(ptep);
 			pgste = pgste_ipte_notify(mm, address, ptep, pgste);
 		}
 
-		if (!mm_exclusive(mm))
-			__ptep_ipte(address, ptep);
+		ptep_flush_lazy(mm, address, ptep);
 		pte = pte_wrprotect(pte);
 
 		if (mm_has_pgste(mm)) {
@@ -1240,7 +1281,7 @@ static inline pte_t mk_pte_phys(unsigned long physpage, pgprot_t pgprot)
 {
 	pte_t __pte;
 	pte_val(__pte) = physpage + pgprot_val(pgprot);
-	return __pte;
+	return pte_mkyoung(__pte);
 }
 
 static inline pte_t mk_pte(struct page *page, pgprot_t pgprot)
@@ -1248,10 +1289,8 @@ static inline pte_t mk_pte(struct page *page, pgprot_t pgprot)
 	unsigned long physpage = page_to_phys(page);
 	pte_t __pte = mk_pte_phys(physpage, pgprot);
 
-	if ((pte_val(__pte) & _PAGE_SWW) && PageDirty(page)) {
-		pte_val(__pte) |= _PAGE_SWC;
-		pte_val(__pte) &= ~_PAGE_RO;
-	}
+	if (pte_write(__pte) && PageDirty(page))
+		__pte = pte_mkdirty(__pte);
 	return __pte;
 }
 
@@ -1313,7 +1352,7 @@ static inline void __pmd_idte(unsigned long address, pmd_t *pmdp)
 	unsigned long sto = (unsigned long) pmdp -
 			    pmd_index(address) * sizeof(pmd_t);
 
-	if (!(pmd_val(*pmdp) & _SEGMENT_ENTRY_INV)) {
+	if (!(pmd_val(*pmdp) & _SEGMENT_ENTRY_INVALID)) {
 		asm volatile(
 			"	.insn	rrf,0xb98e0000,%2,%3,0,0"
 			: "=m" (*pmdp)
@@ -1324,24 +1363,68 @@ static inline void __pmd_idte(unsigned long address, pmd_t *pmdp)
 	}
 }
 
+static inline void __pmd_csp(pmd_t *pmdp)
+{
+	register unsigned long reg2 asm("2") = pmd_val(*pmdp);
+	register unsigned long reg3 asm("3") = pmd_val(*pmdp) |
+					       _SEGMENT_ENTRY_INVALID;
+	register unsigned long reg4 asm("4") = ((unsigned long) pmdp) + 5;
+
+	asm volatile(
+		"	csp %1,%3"
+		: "=m" (*pmdp)
+		: "d" (reg2), "d" (reg3), "d" (reg4), "m" (*pmdp) : "cc");
+}
+
 #if defined(CONFIG_TRANSPARENT_HUGEPAGE) || defined(CONFIG_HUGETLB_PAGE)
 static inline unsigned long massage_pgprot_pmd(pgprot_t pgprot)
 {
 	/*
-	 * pgprot is PAGE_NONE, PAGE_RO, or PAGE_RW (see __Pxxx / __Sxxx)
+	 * pgprot is PAGE_NONE, PAGE_READ, or PAGE_WRITE (see __Pxxx / __Sxxx)
 	 * Convert to segment table entry format.
 	 */
 	if (pgprot_val(pgprot) == pgprot_val(PAGE_NONE))
 		return pgprot_val(SEGMENT_NONE);
-	if (pgprot_val(pgprot) == pgprot_val(PAGE_RO))
-		return pgprot_val(SEGMENT_RO);
-	return pgprot_val(SEGMENT_RW);
+	if (pgprot_val(pgprot) == pgprot_val(PAGE_READ))
+		return pgprot_val(SEGMENT_READ);
+	return pgprot_val(SEGMENT_WRITE);
+}
+
+static inline pmd_t pmd_mkyoung(pmd_t pmd)
+{
+#ifdef CONFIG_64BIT
+	if (pmd_prot_none(pmd)) {
+		pmd_val(pmd) |= _SEGMENT_ENTRY_PROTECT;
+	} else {
+		pmd_val(pmd) |= _SEGMENT_ENTRY_YOUNG;
+		pmd_val(pmd) &= ~_SEGMENT_ENTRY_INVALID;
+	}
+#endif
+	return pmd;
+}
+
+static inline pmd_t pmd_mkold(pmd_t pmd)
+{
+#ifdef CONFIG_64BIT
+	if (pmd_prot_none(pmd)) {
+		pmd_val(pmd) &= ~_SEGMENT_ENTRY_PROTECT;
+	} else {
+		pmd_val(pmd) &= ~_SEGMENT_ENTRY_YOUNG;
+		pmd_val(pmd) |= _SEGMENT_ENTRY_INVALID;
+	}
+#endif
+	return pmd;
 }
 
 static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
 {
+	int young;
+
+	young = pmd_young(pmd);
 	pmd_val(pmd) &= _SEGMENT_CHG_MASK;
 	pmd_val(pmd) |= massage_pgprot_pmd(newprot);
+	if (young)
+		pmd = pmd_mkyoung(pmd);
 	return pmd;
 }
 
@@ -1349,18 +1432,29 @@ static inline pmd_t mk_pmd_phys(unsigned long physpage, pgprot_t pgprot)
 {
 	pmd_t __pmd;
 	pmd_val(__pmd) = physpage + massage_pgprot_pmd(pgprot);
-	return __pmd;
+	return pmd_mkyoung(__pmd);
 }
 
 static inline pmd_t pmd_mkwrite(pmd_t pmd)
 {
-	/* Do not clobber _HPAGE_TYPE_NONE pages! */
-	if (!(pmd_val(pmd) & _SEGMENT_ENTRY_INV))
-		pmd_val(pmd) &= ~_SEGMENT_ENTRY_RO;
+	/* Do not clobber PROT_NONE segments! */
+	if (!pmd_prot_none(pmd))
+		pmd_val(pmd) &= ~_SEGMENT_ENTRY_PROTECT;
 	return pmd;
 }
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE || CONFIG_HUGETLB_PAGE */
 
+static inline void pmdp_flush_lazy(struct mm_struct *mm,
+				   unsigned long address, pmd_t *pmdp)
+{
+	int active = (mm == current->active_mm) ? 1 : 0;
+
+	if ((atomic_read(&mm->context.attach_count) & 0xffff) > active)
+		__pmd_idte(address, pmdp);
+	else
+		mm->context.flush_mm = 1;
+}
+
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 
 #define __HAVE_ARCH_PGTABLE_DEPOSIT
@@ -1378,7 +1472,7 @@ static inline int pmd_trans_splitting(pmd_t pmd)
 static inline void set_pmd_at(struct mm_struct *mm, unsigned long addr,
 			      pmd_t *pmdp, pmd_t entry)
 {
-	if (!(pmd_val(entry) & _SEGMENT_ENTRY_INV) && MACHINE_HAS_EDAT1)
+	if (!(pmd_val(entry) & _SEGMENT_ENTRY_INVALID) && MACHINE_HAS_EDAT1)
 		pmd_val(entry) |= _SEGMENT_ENTRY_CO;
 	*pmdp = entry;
 }
@@ -1391,7 +1485,9 @@ static inline pmd_t pmd_mkhuge(pmd_t pmd)
 
 static inline pmd_t pmd_wrprotect(pmd_t pmd)
 {
-	pmd_val(pmd) |= _SEGMENT_ENTRY_RO;
+	/* Do not clobber PROT_NONE segments! */
+	if (!pmd_prot_none(pmd))
+		pmd_val(pmd) |= _SEGMENT_ENTRY_PROTECT;
 	return pmd;
 }
 
@@ -1401,50 +1497,16 @@ static inline pmd_t pmd_mkdirty(pmd_t pmd)
 	return pmd;
 }
 
-static inline pmd_t pmd_mkold(pmd_t pmd)
-{
-	/* No referenced bit in the segment table entry. */
-	return pmd;
-}
-
-static inline pmd_t pmd_mkyoung(pmd_t pmd)
-{
-	/* No referenced bit in the segment table entry. */
-	return pmd;
-}
-
 #define __HAVE_ARCH_PMDP_TEST_AND_CLEAR_YOUNG
 static inline int pmdp_test_and_clear_young(struct vm_area_struct *vma,
 					    unsigned long address, pmd_t *pmdp)
 {
-	unsigned long pmd_addr = pmd_val(*pmdp) & HPAGE_MASK;
-	long tmp, rc;
-	int counter;
+	pmd_t pmd;
 
-	rc = 0;
-	if (MACHINE_HAS_RRBM) {
-		counter = PTRS_PER_PTE >> 6;
-		asm volatile(
-			"0:	.insn	rre,0xb9ae0000,%0,%3\n"	/* rrbm */
-			"	ogr	%1,%0\n"
-			"	la	%3,0(%4,%3)\n"
-			"	brct	%2,0b\n"
-			: "=&d" (tmp), "+&d" (rc), "+d" (counter),
-			  "+a" (pmd_addr)
-			: "a" (64 * 4096UL) : "cc");
-		rc = !!rc;
-	} else {
-		counter = PTRS_PER_PTE;
-		asm volatile(
-			"0:	rrbe	0,%2\n"
-			"	la	%2,0(%3,%2)\n"
-			"	brc	12,1f\n"
-			"	lhi	%0,1\n"
-			"1:	brct	%1,0b\n"
-			: "+d" (rc), "+d" (counter), "+a" (pmd_addr)
-			: "a" (4096UL) : "cc");
-	}
-	return rc;
+	pmd = *pmdp;
+	__pmd_idte(address, pmdp);
+	*pmdp = pmd_mkold(pmd);
+	return pmd_young(pmd);
 }
 
 #define __HAVE_ARCH_PMDP_GET_AND_CLEAR
@@ -1510,10 +1572,8 @@ static inline unsigned long pmd_pfn(pmd_t pmd)
  * exception will occur instead of a page translation exception. The
  * specifiation exception has the bad habit not to store necessary
  * information in the lowcore.
- * Bit 21 and bit 22 are the page invalid bit and the page protection
- * bit. We set both to indicate a swapped page.
- * Bit 30 and 31 are used to distinguish the different page types. For
- * a swapped page these bits need to be zero.
+ * Bits 21, 22, 30 and 31 are used to indicate the page type.
+ * A swap pte is indicated by bit pattern (pte & 0x603) == 0x402
  * This leaves the bits 1-19 and bits 24-29 to store type and offset.
  * We use the 5 bits from 25-29 for the type and the 20 bits from 1-19
  * plus 24 for the offset.
@@ -1527,10 +1587,8 @@ static inline unsigned long pmd_pfn(pmd_t pmd)
  * exception will occur instead of a page translation exception. The
  * specifiation exception has the bad habit not to store necessary
  * information in the lowcore.
- * Bit 53 and bit 54 are the page invalid bit and the page protection
- * bit. We set both to indicate a swapped page.
- * Bit 62 and 63 are used to distinguish the different page types. For
- * a swapped page these bits need to be zero.
+ * Bits 53, 54, 62 and 63 are used to indicate the page type.
+ * A swap pte is indicated by bit pattern (pte & 0x603) == 0x402
  * This leaves the bits 0-51 and bits 56-61 to store type and offset.
  * We use the 5 bits from 57-61 for the type and the 53 bits from 0-51
  * plus 56 for the offset.
@@ -1547,7 +1605,7 @@ static inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
 {
 	pte_t pte;
 	offset &= __SWP_OFFSET_MASK;
-	pte_val(pte) = _PAGE_TYPE_SWAP | ((type & 0x1f) << 2) |
+	pte_val(pte) = _PAGE_INVALID | _PAGE_TYPE | ((type & 0x1f) << 2) |
 		((offset & 1UL) << 7) | ((offset & ~1UL) << 11);
 	return pte;
 }
@@ -1570,7 +1628,7 @@ static inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
 
 #define pgoff_to_pte(__off) \
 	((pte_t) { ((((__off) & 0x7f) << 1) + (((__off) >> 7) << 12)) \
-		   | _PAGE_TYPE_FILE })
+		   | _PAGE_INVALID | _PAGE_PROTECT })
 
 #endif /* !__ASSEMBLY__ */
 
diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
index b0e6435..0a876bc 100644
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@@ -43,6 +43,7 @@ extern void execve_tail(void);
 #ifndef CONFIG_64BIT
 
 #define TASK_SIZE		(1UL << 31)
+#define TASK_MAX_SIZE		(1UL << 31)
 #define TASK_UNMAPPED_BASE	(1UL << 30)
 
 #else /* CONFIG_64BIT */
@@ -51,6 +52,7 @@ extern void execve_tail(void);
 #define TASK_UNMAPPED_BASE	(test_thread_flag(TIF_31BIT) ? \
 					(1UL << 30) : (1UL << 41))
 #define TASK_SIZE		TASK_SIZE_OF(current)
+#define TASK_MAX_SIZE		(1UL << 53)
 
 #endif /* CONFIG_64BIT */
 
@@ -132,19 +134,17 @@ struct stack_frame {
  * Do necessary setup to start up a new thread.
  */
 #define start_thread(regs, new_psw, new_stackp) do {			\
-	regs->psw.mask	= psw_user_bits | PSW_MASK_EA | PSW_MASK_BA;	\
+	regs->psw.mask	= PSW_USER_BITS | PSW_MASK_EA | PSW_MASK_BA;	\
 	regs->psw.addr	= new_psw | PSW_ADDR_AMODE;			\
 	regs->gprs[15]	= new_stackp;					\
 	execve_tail();							\
 } while (0)
 
 #define start_thread31(regs, new_psw, new_stackp) do {			\
-	regs->psw.mask	= psw_user_bits | PSW_MASK_BA;			\
+	regs->psw.mask	= PSW_USER_BITS | PSW_MASK_BA;			\
 	regs->psw.addr	= new_psw | PSW_ADDR_AMODE;			\
 	regs->gprs[15]	= new_stackp;					\
-	__tlb_flush_mm(current->mm);					\
 	crst_table_downgrade(current->mm, 1UL << 31);			\
-	update_mm(current->mm, current);				\
 	execve_tail();							\
 } while (0)
 
@@ -167,17 +167,15 @@ extern void release_thread(struct task_struct *);
  */
 extern unsigned long thread_saved_pc(struct task_struct *t);
 
-extern void show_code(struct pt_regs *regs);
-extern void print_fn_code(unsigned char *code, unsigned long len);
-extern int insn_to_mnemonic(unsigned char *instruction, char *buf,
-			    unsigned int len);
-
 unsigned long get_wchan(struct task_struct *p);
 #define task_pt_regs(tsk) ((struct pt_regs *) \
         (task_stack_page(tsk) + THREAD_SIZE) - 1)
 #define KSTK_EIP(tsk)	(task_pt_regs(tsk)->psw.addr)
 #define KSTK_ESP(tsk)	(task_pt_regs(tsk)->gprs[15])
 
+/* Has task runtime instrumentation enabled ? */
+#define is_ri_task(tsk) (!!(tsk)->thread.ri_cb)
+
 static inline unsigned short stap(void)
 {
 	unsigned short cpu_address;
@@ -196,6 +194,8 @@ static inline void cpu_relax(void)
 	barrier();
 }
 
+#define arch_mutex_cpu_relax()  barrier()
+
 static inline void psw_set_key(unsigned int key)
 {
 	asm volatile("spka 0(%0)" : : "d" (key));
@@ -344,9 +344,9 @@ __set_psw_mask(unsigned long mask)
 }
 
 #define local_mcck_enable() \
-	__set_psw_mask(psw_kernel_bits | PSW_MASK_DAT | PSW_MASK_MCHECK)
+	__set_psw_mask(PSW_KERNEL_BITS | PSW_MASK_DAT | PSW_MASK_MCHECK)
 #define local_mcck_disable() \
-	__set_psw_mask(psw_kernel_bits | PSW_MASK_DAT)
+	__set_psw_mask(PSW_KERNEL_BITS | PSW_MASK_DAT)
 
 /*
  * Basic Machine Check/Program Check Handler.
diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h
index 52b5653..9c82ceb 100644
--- a/arch/s390/include/asm/ptrace.h
+++ b/arch/s390/include/asm/ptrace.h
@@ -10,8 +10,11 @@
 
 #ifndef __ASSEMBLY__
 
-extern long psw_kernel_bits;
-extern long psw_user_bits;
+#define PSW_KERNEL_BITS	(PSW_DEFAULT_KEY | PSW_MASK_BASE | PSW_ASC_HOME | \
+			 PSW_MASK_EA | PSW_MASK_BA)
+#define PSW_USER_BITS	(PSW_MASK_DAT | PSW_MASK_IO | PSW_MASK_EXT | \
+			 PSW_DEFAULT_KEY | PSW_MASK_BASE | PSW_MASK_MCHECK | \
+			 PSW_MASK_PSTATE | PSW_ASC_PRIMARY)
 
 /*
  * The pt_regs struct defines the way the registers are stored on
diff --git a/arch/s390/include/asm/sclp.h b/arch/s390/include/asm/sclp.h
index 06a1361..7dc7f9c 100644
--- a/arch/s390/include/asm/sclp.h
+++ b/arch/s390/include/asm/sclp.h
@@ -56,5 +56,6 @@ bool sclp_has_linemode(void);
 bool sclp_has_vt220(void);
 int sclp_pci_configure(u32 fid);
 int sclp_pci_deconfigure(u32 fid);
+int memcpy_hsa(void *dest, unsigned long src, size_t count, int mode);
 
 #endif /* _ASM_S390_SCLP_H */
diff --git a/arch/s390/include/asm/serial.h b/arch/s390/include/asm/serial.h
new file mode 100644
index 0000000..5b3e48e
--- /dev/null
+++ b/arch/s390/include/asm/serial.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_S390_SERIAL_H
+#define _ASM_S390_SERIAL_H
+
+#define BASE_BAUD 0
+
+#endif /* _ASM_S390_SERIAL_H */
diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h
index 59880dba..df802ee 100644
--- a/arch/s390/include/asm/setup.h
+++ b/arch/s390/include/asm/setup.h
@@ -48,13 +48,6 @@ void detect_memory_layout(struct mem_chunk chunk[], unsigned long maxsize);
 void create_mem_hole(struct mem_chunk mem_chunk[], unsigned long addr,
 		     unsigned long size);
 
-#define PRIMARY_SPACE_MODE	0
-#define ACCESS_REGISTER_MODE	1
-#define SECONDARY_SPACE_MODE	2
-#define HOME_SPACE_MODE		3
-
-extern unsigned int s390_user_mode;
-
 /*
  * Machine features detected in head.S
  */
diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h
index b64f15c..ac9bed8 100644
--- a/arch/s390/include/asm/smp.h
+++ b/arch/s390/include/asm/smp.h
@@ -14,7 +14,6 @@
 #define raw_smp_processor_id()	(S390_lowcore.cpu_nr)
 
 extern struct mutex smp_cpu_state_mutex;
-extern struct save_area *zfcpdump_save_areas[NR_CPUS + 1];
 
 extern int __cpu_up(unsigned int cpu, struct task_struct *tidle);
 
diff --git a/arch/s390/include/asm/spinlock.h b/arch/s390/include/asm/spinlock.h
index 701fe8c..83e5d216 100644
--- a/arch/s390/include/asm/spinlock.h
+++ b/arch/s390/include/asm/spinlock.h
@@ -44,6 +44,11 @@ extern void arch_spin_lock_wait_flags(arch_spinlock_t *, unsigned long flags);
 extern int arch_spin_trylock_retry(arch_spinlock_t *);
 extern void arch_spin_relax(arch_spinlock_t *lock);
 
+static inline int arch_spin_value_unlocked(arch_spinlock_t lock)
+{
+	return lock.owner_cpu == 0;
+}
+
 static inline void arch_spin_lock(arch_spinlock_t *lp)
 {
 	int old;
diff --git a/arch/s390/include/asm/switch_to.h b/arch/s390/include/asm/switch_to.h
index 80b6f11..29c81f8 100644
--- a/arch/s390/include/asm/switch_to.h
+++ b/arch/s390/include/asm/switch_to.h
@@ -8,82 +8,125 @@
 #define __ASM_SWITCH_TO_H
 
 #include <linux/thread_info.h>
+#include <asm/ptrace.h>
 
 extern struct task_struct *__switch_to(void *, void *);
 extern void update_cr_regs(struct task_struct *task);
 
-static inline void save_fp_regs(s390_fp_regs *fpregs)
+static inline int test_fp_ctl(u32 fpc)
 {
+	u32 orig_fpc;
+	int rc;
+
+	if (!MACHINE_HAS_IEEE)
+		return 0;
+
 	asm volatile(
-		"	std	0,%O0+8(%R0)\n"
-		"	std	2,%O0+24(%R0)\n"
-		"	std	4,%O0+40(%R0)\n"
-		"	std	6,%O0+56(%R0)"
-		: "=Q" (*fpregs) : "Q" (*fpregs));
+		"	efpc    %1\n"
+		"	sfpc	%2\n"
+		"0:	sfpc	%1\n"
+		"	la	%0,0\n"
+		"1:\n"
+		EX_TABLE(0b,1b)
+		: "=d" (rc), "=d" (orig_fpc)
+		: "d" (fpc), "0" (-EINVAL));
+	return rc;
+}
+
+static inline void save_fp_ctl(u32 *fpc)
+{
 	if (!MACHINE_HAS_IEEE)
 		return;
+
 	asm volatile(
-		"	stfpc	%0\n"
-		"	std	1,%O0+16(%R0)\n"
-		"	std	3,%O0+32(%R0)\n"
-		"	std	5,%O0+48(%R0)\n"
-		"	std	7,%O0+64(%R0)\n"
-		"	std	8,%O0+72(%R0)\n"
-		"	std	9,%O0+80(%R0)\n"
-		"	std	10,%O0+88(%R0)\n"
-		"	std	11,%O0+96(%R0)\n"
-		"	std	12,%O0+104(%R0)\n"
-		"	std	13,%O0+112(%R0)\n"
-		"	std	14,%O0+120(%R0)\n"
-		"	std	15,%O0+128(%R0)\n"
-		: "=Q" (*fpregs) : "Q" (*fpregs));
+		"       stfpc   %0\n"
+		: "+Q" (*fpc));
 }
 
-static inline void restore_fp_regs(s390_fp_regs *fpregs)
+static inline int restore_fp_ctl(u32 *fpc)
 {
+	int rc;
+
+	if (!MACHINE_HAS_IEEE)
+		return 0;
+
 	asm volatile(
-		"	ld	0,%O0+8(%R0)\n"
-		"	ld	2,%O0+24(%R0)\n"
-		"	ld	4,%O0+40(%R0)\n"
-		"	ld	6,%O0+56(%R0)"
-		: : "Q" (*fpregs));
+		"0:	lfpc    %1\n"
+		"	la	%0,0\n"
+		"1:\n"
+		EX_TABLE(0b,1b)
+		: "=d" (rc) : "Q" (*fpc), "0" (-EINVAL));
+	return rc;
+}
+
+static inline void save_fp_regs(freg_t *fprs)
+{
+	asm volatile("std 0,%0" : "=Q" (fprs[0]));
+	asm volatile("std 2,%0" : "=Q" (fprs[2]));
+	asm volatile("std 4,%0" : "=Q" (fprs[4]));
+	asm volatile("std 6,%0" : "=Q" (fprs[6]));
 	if (!MACHINE_HAS_IEEE)
 		return;
-	asm volatile(
-		"	lfpc	%0\n"
-		"	ld	1,%O0+16(%R0)\n"
-		"	ld	3,%O0+32(%R0)\n"
-		"	ld	5,%O0+48(%R0)\n"
-		"	ld	7,%O0+64(%R0)\n"
-		"	ld	8,%O0+72(%R0)\n"
-		"	ld	9,%O0+80(%R0)\n"
-		"	ld	10,%O0+88(%R0)\n"
-		"	ld	11,%O0+96(%R0)\n"
-		"	ld	12,%O0+104(%R0)\n"
-		"	ld	13,%O0+112(%R0)\n"
-		"	ld	14,%O0+120(%R0)\n"
-		"	ld	15,%O0+128(%R0)\n"
-		: : "Q" (*fpregs));
+	asm volatile("std 1,%0" : "=Q" (fprs[1]));
+	asm volatile("std 3,%0" : "=Q" (fprs[3]));
+	asm volatile("std 5,%0" : "=Q" (fprs[5]));
+	asm volatile("std 7,%0" : "=Q" (fprs[7]));
+	asm volatile("std 8,%0" : "=Q" (fprs[8]));
+	asm volatile("std 9,%0" : "=Q" (fprs[9]));
+	asm volatile("std 10,%0" : "=Q" (fprs[10]));
+	asm volatile("std 11,%0" : "=Q" (fprs[11]));
+	asm volatile("std 12,%0" : "=Q" (fprs[12]));
+	asm volatile("std 13,%0" : "=Q" (fprs[13]));
+	asm volatile("std 14,%0" : "=Q" (fprs[14]));
+	asm volatile("std 15,%0" : "=Q" (fprs[15]));
+}
+
+static inline void restore_fp_regs(freg_t *fprs)
+{
+	asm volatile("ld 0,%0" : : "Q" (fprs[0]));
+	asm volatile("ld 2,%0" : : "Q" (fprs[2]));
+	asm volatile("ld 4,%0" : : "Q" (fprs[4]));
+	asm volatile("ld 6,%0" : : "Q" (fprs[6]));
+	if (!MACHINE_HAS_IEEE)
+		return;
+	asm volatile("ld 1,%0" : : "Q" (fprs[1]));
+	asm volatile("ld 3,%0" : : "Q" (fprs[3]));
+	asm volatile("ld 5,%0" : : "Q" (fprs[5]));
+	asm volatile("ld 7,%0" : : "Q" (fprs[7]));
+	asm volatile("ld 8,%0" : : "Q" (fprs[8]));
+	asm volatile("ld 9,%0" : : "Q" (fprs[9]));
+	asm volatile("ld 10,%0" : : "Q" (fprs[10]));
+	asm volatile("ld 11,%0" : : "Q" (fprs[11]));
+	asm volatile("ld 12,%0" : : "Q" (fprs[12]));
+	asm volatile("ld 13,%0" : : "Q" (fprs[13]));
+	asm volatile("ld 14,%0" : : "Q" (fprs[14]));
+	asm volatile("ld 15,%0" : : "Q" (fprs[15]));
 }
 
 static inline void save_access_regs(unsigned int *acrs)
 {
-	asm volatile("stam 0,15,%0" : "=Q" (*acrs));
+	typedef struct { int _[NUM_ACRS]; } acrstype;
+
+	asm volatile("stam 0,15,%0" : "=Q" (*(acrstype *)acrs));
 }
 
 static inline void restore_access_regs(unsigned int *acrs)
 {
-	asm volatile("lam 0,15,%0" : : "Q" (*acrs));
+	typedef struct { int _[NUM_ACRS]; } acrstype;
+
+	asm volatile("lam 0,15,%0" : : "Q" (*(acrstype *)acrs));
 }
 
 #define switch_to(prev,next,last) do {					\
 	if (prev->mm) {							\
-		save_fp_regs(&prev->thread.fp_regs);			\
+		save_fp_ctl(&prev->thread.fp_regs.fpc);			\
+		save_fp_regs(prev->thread.fp_regs.fprs);		\
 		save_access_regs(&prev->thread.acrs[0]);		\
 		save_ri_cb(prev->thread.ri_cb);				\
 	}								\
 	if (next->mm) {							\
-		restore_fp_regs(&next->thread.fp_regs);			\
+		restore_fp_ctl(&next->thread.fp_regs.fpc);		\
+		restore_fp_regs(next->thread.fp_regs.fprs);		\
 		restore_access_regs(&next->thread.acrs[0]);		\
 		restore_ri_cb(next->thread.ri_cb, prev->thread.ri_cb);	\
 		update_cr_regs(next);					\
diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h
index 8ad8af9..8beee1c 100644
--- a/arch/s390/include/asm/timex.h
+++ b/arch/s390/include/asm/timex.h
@@ -71,30 +71,32 @@ static inline void local_tick_enable(unsigned long long comp)
 
 typedef unsigned long long cycles_t;
 
-static inline unsigned long long get_tod_clock(void)
+static inline void get_tod_clock_ext(char clk[16])
 {
-	unsigned long long clk;
-
-#ifdef CONFIG_HAVE_MARCH_Z9_109_FEATURES
-	asm volatile(".insn s,0xb27c0000,%0" : "=Q" (clk) : : "cc");
-#else
-	asm volatile("stck %0" : "=Q" (clk) : : "cc");
-#endif
-	return clk;
-}
+	typedef struct { char _[sizeof(clk)]; } addrtype;
 
-static inline void get_tod_clock_ext(char *clk)
-{
-	asm volatile("stcke %0" : "=Q" (*clk) : : "cc");
+	asm volatile("stcke %0" : "=Q" (*(addrtype *) clk) : : "cc");
 }
 
-static inline unsigned long long get_tod_clock_xt(void)
+static inline unsigned long long get_tod_clock(void)
 {
 	unsigned char clk[16];
 	get_tod_clock_ext(clk);
 	return *((unsigned long long *)&clk[1]);
 }
 
+static inline unsigned long long get_tod_clock_fast(void)
+{
+#ifdef CONFIG_HAVE_MARCH_Z9_109_FEATURES
+	unsigned long long clk;
+
+	asm volatile("stckf %0" : "=Q" (clk) : : "cc");
+	return clk;
+#else
+	return get_tod_clock();
+#endif
+}
+
 static inline cycles_t get_cycles(void)
 {
 	return (cycles_t) get_tod_clock() >> 2;
@@ -125,7 +127,7 @@ extern u64 sched_clock_base_cc;
  */
 static inline unsigned long long get_tod_clock_monotonic(void)
 {
-	return get_tod_clock_xt() - sched_clock_base_cc;
+	return get_tod_clock() - sched_clock_base_cc;
 }
 
 /**
diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h
index 6d6d92b..2cb846c 100644
--- a/arch/s390/include/asm/tlb.h
+++ b/arch/s390/include/asm/tlb.h
@@ -63,13 +63,14 @@ static inline void tlb_gather_mmu(struct mmu_gather *tlb,
 
 static inline void tlb_flush_mmu(struct mmu_gather *tlb)
 {
+	__tlb_flush_mm_lazy(tlb->mm);
 	tlb_table_flush(tlb);
 }
 
 static inline void tlb_finish_mmu(struct mmu_gather *tlb,
 				  unsigned long start, unsigned long end)
 {
-	tlb_table_flush(tlb);
+	tlb_flush_mmu(tlb);
 }
 
 /*
diff --git a/arch/s390/include/asm/tlbflush.h b/arch/s390/include/asm/tlbflush.h
index 6b32af3..f9fef04 100644
--- a/arch/s390/include/asm/tlbflush.h
+++ b/arch/s390/include/asm/tlbflush.h
@@ -86,7 +86,7 @@ static inline void __tlb_flush_mm(struct mm_struct * mm)
 		__tlb_flush_full(mm);
 }
 
-static inline void __tlb_flush_mm_cond(struct mm_struct * mm)
+static inline void __tlb_flush_mm_lazy(struct mm_struct * mm)
 {
 	if (mm->context.flush_mm) {
 		__tlb_flush_mm(mm);
@@ -118,13 +118,13 @@ static inline void __tlb_flush_mm_cond(struct mm_struct * mm)
 
 static inline void flush_tlb_mm(struct mm_struct *mm)
 {
-	__tlb_flush_mm_cond(mm);
+	__tlb_flush_mm_lazy(mm);
 }
 
 static inline void flush_tlb_range(struct vm_area_struct *vma,
 				   unsigned long start, unsigned long end)
 {
-	__tlb_flush_mm_cond(vma->vm_mm);
+	__tlb_flush_mm_lazy(vma->vm_mm);
 }
 
 static inline void flush_tlb_kernel_range(unsigned long start,
diff --git a/arch/s390/include/asm/uaccess.h b/arch/s390/include/asm/uaccess.h
index 9c33ed4..79330af 100644
--- a/arch/s390/include/asm/uaccess.h
+++ b/arch/s390/include/asm/uaccess.h
@@ -94,9 +94,7 @@ static inline unsigned long extable_fixup(const struct exception_table_entry *x)
 
 struct uaccess_ops {
 	size_t (*copy_from_user)(size_t, const void __user *, void *);
-	size_t (*copy_from_user_small)(size_t, const void __user *, void *);
 	size_t (*copy_to_user)(size_t, void __user *, const void *);
-	size_t (*copy_to_user_small)(size_t, void __user *, const void *);
 	size_t (*copy_in_user)(size_t, void __user *, const void __user *);
 	size_t (*clear_user)(size_t, void __user *);
 	size_t (*strnlen_user)(size_t, const char __user *);
@@ -106,22 +104,20 @@ struct uaccess_ops {
 };
 
 extern struct uaccess_ops uaccess;
-extern struct uaccess_ops uaccess_std;
 extern struct uaccess_ops uaccess_mvcos;
-extern struct uaccess_ops uaccess_mvcos_switch;
 extern struct uaccess_ops uaccess_pt;
 
 extern int __handle_fault(unsigned long, unsigned long, int);
 
 static inline int __put_user_fn(size_t size, void __user *ptr, void *x)
 {
-	size = uaccess.copy_to_user_small(size, ptr, x);
+	size = uaccess.copy_to_user(size, ptr, x);
 	return size ? -EFAULT : size;
 }
 
 static inline int __get_user_fn(size_t size, const void __user *ptr, void *x)
 {
-	size = uaccess.copy_from_user_small(size, ptr, x);
+	size = uaccess.copy_from_user(size, ptr, x);
 	return size ? -EFAULT : size;
 }
 
@@ -226,10 +222,7 @@ extern int __get_user_bad(void) __attribute__((noreturn));
 static inline unsigned long __must_check
 __copy_to_user(void __user *to, const void *from, unsigned long n)
 {
-	if (__builtin_constant_p(n) && (n <= 256))
-		return uaccess.copy_to_user_small(n, to, from);
-	else
-		return uaccess.copy_to_user(n, to, from);
+	return uaccess.copy_to_user(n, to, from);
 }
 
 #define __copy_to_user_inatomic __copy_to_user
@@ -275,10 +268,7 @@ copy_to_user(void __user *to, const void *from, unsigned long n)
 static inline unsigned long __must_check
 __copy_from_user(void *to, const void __user *from, unsigned long n)
 {
-	if (__builtin_constant_p(n) && (n <= 256))
-		return uaccess.copy_from_user_small(n, from, to);
-	else
-		return uaccess.copy_from_user(n, from, to);
+	return uaccess.copy_from_user(n, from, to);
 }
 
 extern void copy_from_user_overflow(void)
diff --git a/arch/s390/include/asm/vtime.h b/arch/s390/include/asm/vtime.h
new file mode 100644
index 0000000..af9896c
--- /dev/null
+++ b/arch/s390/include/asm/vtime.h
@@ -0,0 +1,7 @@
+#ifndef _S390_VTIME_H
+#define _S390_VTIME_H
+
+#define __ARCH_HAS_VTIME_ACCOUNT
+#define __ARCH_HAS_VTIME_TASK_SWITCH
+
+#endif /* _S390_VTIME_H */
diff --git a/arch/s390/include/uapi/asm/ptrace.h b/arch/s390/include/uapi/asm/ptrace.h
index 7a84619..7e0b498 100644
--- a/arch/s390/include/uapi/asm/ptrace.h
+++ b/arch/s390/include/uapi/asm/ptrace.h
@@ -199,6 +199,7 @@ typedef union
 typedef struct
 {
 	__u32   fpc;
+	__u32	pad;
 	freg_t  fprs[NUM_FPRS];              
 } s390_fp_regs;
 
@@ -206,7 +207,6 @@ typedef struct
 #define FPC_FLAGS_MASK          0x00F80000
 #define FPC_DXC_MASK            0x0000FF00
 #define FPC_RM_MASK             0x00000003
-#define FPC_VALID_MASK          0xF8F8FF03
 
 /* this typedef defines how a Program Status Word looks like */
 typedef struct 
@@ -263,7 +263,7 @@ typedef struct
 #define PSW_MASK_EA		0x0000000100000000UL
 #define PSW_MASK_BA		0x0000000080000000UL
 
-#define PSW_MASK_USER		0x0000FF8180000000UL
+#define PSW_MASK_USER		0x0000FF0180000000UL
 
 #define PSW_ADDR_AMODE		0x0000000000000000UL
 #define PSW_ADDR_INSN		0xFFFFFFFFFFFFFFFFUL
diff --git a/arch/s390/include/uapi/asm/sigcontext.h b/arch/s390/include/uapi/asm/sigcontext.h
index 584787f..b30de9c 100644
--- a/arch/s390/include/uapi/asm/sigcontext.h
+++ b/arch/s390/include/uapi/asm/sigcontext.h
@@ -49,6 +49,7 @@ typedef struct
 typedef struct
 {
 	unsigned int fpc;
+	unsigned int pad;
 	double   fprs[__NUM_FPRS];
 } _s390_fp_regs;
 
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index 4bb2a46..2403303 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -28,7 +28,7 @@ CFLAGS_ptrace.o		+= -DUTS_MACHINE='"$(UTS_MACHINE)"'
 
 CFLAGS_sysinfo.o += -Iinclude/math-emu -Iarch/s390/math-emu -w
 
-obj-y	:= bitmap.o traps.o time.o process.o base.o early.o setup.o vtime.o
+obj-y	:= traps.o time.o process.o base.o early.o setup.o vtime.o
 obj-y	+= processor.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o nmi.o
 obj-y	+= debug.o irq.o ipl.o dis.o diag.o sclp.o vdso.o
 obj-y	+= sysinfo.o jump_label.o lgr.o os_info.o machine_kexec.o pgm_check.o
diff --git a/arch/s390/kernel/bitmap.c b/arch/s390/kernel/bitmap.c
deleted file mode 100644
index 102da5e..0000000
--- a/arch/s390/kernel/bitmap.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- *    Bitmaps for set_bit, clear_bit, test_and_set_bit, ...
- *    See include/asm/{bitops.h|posix_types.h} for details
- *
- *    Copyright IBM Corp. 1999, 2009
- *    Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>,
- */
-
-#include <linux/bitops.h>
-#include <linux/module.h>
-
-const char _oi_bitmap[] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 };
-EXPORT_SYMBOL(_oi_bitmap);
-
-const char _ni_bitmap[] = { 0xfe, 0xfd, 0xfb, 0xf7, 0xef, 0xdf, 0xbf, 0x7f };
-EXPORT_SYMBOL(_ni_bitmap);
-
-const char _zb_findmap[] = {
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,6,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,7,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,6,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,5,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,4,
-	0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,8 };
-EXPORT_SYMBOL(_zb_findmap);
-
-const char _sb_findmap[] = {
-	8,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	5,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	6,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	5,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	7,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	5,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	6,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	5,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0,
-	4,0,1,0,2,0,1,0,3,0,1,0,2,0,1,0 };
-EXPORT_SYMBOL(_sb_findmap);
diff --git a/arch/s390/kernel/cache.c b/arch/s390/kernel/cache.c
index dd62071..3a414c0 100644
--- a/arch/s390/kernel/cache.c
+++ b/arch/s390/kernel/cache.c
@@ -146,15 +146,14 @@ static void __init cache_build_info(void)
 	ct.raw = ecag(EXTRACT_TOPOLOGY, 0, 0);
 	for (level = 0; level < CACHE_MAX_LEVEL; level++) {
 		switch (ct.ci[level].scope) {
-		case CACHE_SCOPE_NOTEXISTS:
-		case CACHE_SCOPE_RESERVED:
-			return;
 		case CACHE_SCOPE_SHARED:
 			private = 0;
 			break;
 		case CACHE_SCOPE_PRIVATE:
 			private = 1;
 			break;
+		default:
+			return;
 		}
 		if (ct.ci[level].type == CACHE_TYPE_SEPARATE) {
 			rc  = cache_add(level, private, CACHE_TYPE_DATA);
diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index 8b6e4f5..e030d2b 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -58,10 +58,6 @@
 
 #include "compat_linux.h"
 
-u32 psw32_user_bits = PSW32_MASK_DAT | PSW32_MASK_IO | PSW32_MASK_EXT |
-		      PSW32_DEFAULT_KEY | PSW32_MASK_BASE | PSW32_MASK_MCHECK |
-		      PSW32_MASK_PSTATE | PSW32_ASC_HOME;
- 
 /* For this source file, we want overflow handling. */
 
 #undef high2lowuid
@@ -221,25 +217,26 @@ static int groups16_from_user(struct group_info *group_info, u16 __user *groupli
 
 asmlinkage long sys32_getgroups16(int gidsetsize, u16 __user *grouplist)
 {
+	const struct cred *cred = current_cred();
 	int i;
 
 	if (gidsetsize < 0)
 		return -EINVAL;
 
-	get_group_info(current->cred->group_info);
-	i = current->cred->group_info->ngroups;
+	get_group_info(cred->group_info);
+	i = cred->group_info->ngroups;
 	if (gidsetsize) {
 		if (i > gidsetsize) {
 			i = -EINVAL;
 			goto out;
 		}
-		if (groups16_to_user(grouplist, current->cred->group_info)) {
+		if (groups16_to_user(grouplist, cred->group_info)) {
 			i = -EFAULT;
 			goto out;
 		}
 	}
 out:
-	put_group_info(current->cred->group_info);
+	put_group_info(cred->group_info);
 	return i;
 }
 
diff --git a/arch/s390/kernel/compat_linux.h b/arch/s390/kernel/compat_linux.h
index 976518c..1bfda3e 100644
--- a/arch/s390/kernel/compat_linux.h
+++ b/arch/s390/kernel/compat_linux.h
@@ -27,6 +27,7 @@ typedef union
 typedef struct
 {
 	unsigned int	fpc;
+	unsigned int	pad;
 	freg_t32	fprs[__NUM_FPRS];              
 } _s390_fp_regs32;
 
diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c
index c439ac9..5a3ab5c 100644
--- a/arch/s390/kernel/compat_signal.c
+++ b/arch/s390/kernel/compat_signal.c
@@ -99,7 +99,7 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
 			break;
 		}
 	}
-	return err;
+	return err ? -EFAULT : 0;
 }
 
 int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
@@ -148,62 +148,71 @@ int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
 			break;
 		}
 	}
-	return err;
+	return err ? -EFAULT : 0;
 }
 
 static int save_sigregs32(struct pt_regs *regs, _sigregs32 __user *sregs)
 {
-	_s390_regs_common32 regs32;
-	int err, i;
+	_sigregs32 user_sregs;
+	int i;
 
-	regs32.psw.mask = psw32_user_bits |
-		((__u32)(regs->psw.mask >> 32) & PSW32_MASK_USER);
-	regs32.psw.addr = (__u32) regs->psw.addr |
+	user_sregs.regs.psw.mask = (__u32)(regs->psw.mask >> 32);
+	user_sregs.regs.psw.mask &= PSW32_MASK_USER | PSW32_MASK_RI;
+	user_sregs.regs.psw.mask |= PSW32_USER_BITS;
+	user_sregs.regs.psw.addr = (__u32) regs->psw.addr |
 		(__u32)(regs->psw.mask & PSW_MASK_BA);
 	for (i = 0; i < NUM_GPRS; i++)
-		regs32.gprs[i] = (__u32) regs->gprs[i];
+		user_sregs.regs.gprs[i] = (__u32) regs->gprs[i];
 	save_access_regs(current->thread.acrs);
-	memcpy(regs32.acrs, current->thread.acrs, sizeof(regs32.acrs));
-	err = __copy_to_user(&sregs->regs, &regs32, sizeof(regs32));
-	if (err)
-		return err;
-	save_fp_regs(&current->thread.fp_regs);
-	/* s390_fp_regs and _s390_fp_regs32 are the same ! */
-	return __copy_to_user(&sregs->fpregs, &current->thread.fp_regs,
-			      sizeof(_s390_fp_regs32));
+	memcpy(&user_sregs.regs.acrs, current->thread.acrs,
+	       sizeof(user_sregs.regs.acrs));
+	save_fp_ctl(&current->thread.fp_regs.fpc);
+	save_fp_regs(current->thread.fp_regs.fprs);
+	memcpy(&user_sregs.fpregs, &current->thread.fp_regs,
+	       sizeof(user_sregs.fpregs));
+	if (__copy_to_user(sregs, &user_sregs, sizeof(_sigregs32)))
+		return -EFAULT;
+	return 0;
 }
 
 static int restore_sigregs32(struct pt_regs *regs,_sigregs32 __user *sregs)
 {
-	_s390_regs_common32 regs32;
-	int err, i;
+	_sigregs32 user_sregs;
+	int i;
 
 	/* Alwys make any pending restarted system call return -EINTR */
 	current_thread_info()->restart_block.fn = do_no_restart_syscall;
 
-	err = __copy_from_user(&regs32, &sregs->regs, sizeof(regs32));
-	if (err)
-		return err;
+	if (__copy_from_user(&user_sregs, &sregs->regs, sizeof(user_sregs)))
+		return -EFAULT;
+
+	if (!is_ri_task(current) && (user_sregs.regs.psw.mask & PSW32_MASK_RI))
+		return -EINVAL;
+
+	/* Loading the floating-point-control word can fail. Do that first. */
+	if (restore_fp_ctl(&user_sregs.fpregs.fpc))
+		return -EINVAL;
+
+	/* Use regs->psw.mask instead of PSW_USER_BITS to preserve PER bit. */
 	regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) |
-		(__u64)(regs32.psw.mask & PSW32_MASK_USER) << 32 |
-		(__u64)(regs32.psw.addr & PSW32_ADDR_AMODE);
+		(__u64)(user_sregs.regs.psw.mask & PSW32_MASK_USER) << 32 |
+		(__u64)(user_sregs.regs.psw.mask & PSW32_MASK_RI) << 32 |
+		(__u64)(user_sregs.regs.psw.addr & PSW32_ADDR_AMODE);
 	/* Check for invalid user address space control. */
-	if ((regs->psw.mask & PSW_MASK_ASC) >= (psw_kernel_bits & PSW_MASK_ASC))
-		regs->psw.mask = (psw_user_bits & PSW_MASK_ASC) |
+	if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_HOME)
+		regs->psw.mask = PSW_ASC_PRIMARY |
 			(regs->psw.mask & ~PSW_MASK_ASC);
-	regs->psw.addr = (__u64)(regs32.psw.addr & PSW32_ADDR_INSN);
+	regs->psw.addr = (__u64)(user_sregs.regs.psw.addr & PSW32_ADDR_INSN);
 	for (i = 0; i < NUM_GPRS; i++)
-		regs->gprs[i] = (__u64) regs32.gprs[i];
-	memcpy(current->thread.acrs, regs32.acrs, sizeof(current->thread.acrs));
+		regs->gprs[i] = (__u64) user_sregs.regs.gprs[i];
+	memcpy(&current->thread.acrs, &user_sregs.regs.acrs,
+	       sizeof(current->thread.acrs));
 	restore_access_regs(current->thread.acrs);
 
-	err = __copy_from_user(&current->thread.fp_regs, &sregs->fpregs,
-			       sizeof(_s390_fp_regs32));
-	current->thread.fp_regs.fpc &= FPC_VALID_MASK;
-	if (err)
-		return err;
+	memcpy(&current->thread.fp_regs, &user_sregs.fpregs,
+	       sizeof(current->thread.fp_regs));
 
-	restore_fp_regs(&current->thread.fp_regs);
+	restore_fp_regs(current->thread.fp_regs.fprs);
 	clear_thread_flag(TIF_SYSCALL);	/* No longer in a system call */
 	return 0;
 }
@@ -215,18 +224,18 @@ static int save_sigregs_gprs_high(struct pt_regs *regs, __u32 __user *uregs)
 
 	for (i = 0; i < NUM_GPRS; i++)
 		gprs_high[i] = regs->gprs[i] >> 32;
-
-	return __copy_to_user(uregs, &gprs_high, sizeof(gprs_high));
+	if (__copy_to_user(uregs, &gprs_high, sizeof(gprs_high)))
+		return -EFAULT;
+	return 0;
 }
 
 static int restore_sigregs_gprs_high(struct pt_regs *regs, __u32 __user *uregs)
 {
 	__u32 gprs_high[NUM_GPRS];
-	int err, i;
+	int i;
 
-	err = __copy_from_user(&gprs_high, uregs, sizeof(gprs_high));
-	if (err)
-		return err;
+	if (__copy_from_user(&gprs_high, uregs, sizeof(gprs_high)))
+		return -EFAULT;
 	for (i = 0; i < NUM_GPRS; i++)
 		*(__u32 *)&regs->gprs[i] = gprs_high[i];
 	return 0;
@@ -332,9 +341,9 @@ static int setup_frame32(int sig, struct k_sigaction *ka,
 	/* Set up to return from userspace.  If provided, use a stub
 	   already in userspace.  */
 	if (ka->sa.sa_flags & SA_RESTORER) {
-		regs->gprs[14] = (__u64) ka->sa.sa_restorer | PSW32_ADDR_AMODE;
+		regs->gprs[14] = (__u64 __force) ka->sa.sa_restorer | PSW32_ADDR_AMODE;
 	} else {
-		regs->gprs[14] = (__u64) frame->retcode | PSW32_ADDR_AMODE;
+		regs->gprs[14] = (__u64 __force) frame->retcode | PSW32_ADDR_AMODE;
 		if (__put_user(S390_SYSCALL_OPCODE | __NR_sigreturn,
 			       (u16 __force __user *)(frame->retcode)))
 			goto give_sigsegv;
@@ -348,7 +357,7 @@ static int setup_frame32(int sig, struct k_sigaction *ka,
 	regs->gprs[15] = (__force __u64) frame;
 	/* Force 31 bit amode and default user address space control. */
 	regs->psw.mask = PSW_MASK_BA |
-		(psw_user_bits & PSW_MASK_ASC) |
+		(PSW_USER_BITS & PSW_MASK_ASC) |
 		(regs->psw.mask & ~PSW_MASK_ASC);
 	regs->psw.addr = (__force __u64) ka->sa.sa_handler;
 
@@ -400,9 +409,9 @@ static int setup_rt_frame32(int sig, struct k_sigaction *ka, siginfo_t *info,
 	/* Set up to return from userspace.  If provided, use a stub
 	   already in userspace.  */
 	if (ka->sa.sa_flags & SA_RESTORER) {
-		regs->gprs[14] = (__u64) ka->sa.sa_restorer | PSW32_ADDR_AMODE;
+		regs->gprs[14] = (__u64 __force) ka->sa.sa_restorer | PSW32_ADDR_AMODE;
 	} else {
-		regs->gprs[14] = (__u64) frame->retcode | PSW32_ADDR_AMODE;
+		regs->gprs[14] = (__u64 __force) frame->retcode | PSW32_ADDR_AMODE;
 		err |= __put_user(S390_SYSCALL_OPCODE | __NR_rt_sigreturn,
 				  (u16 __force __user *)(frame->retcode));
 	}
@@ -415,9 +424,9 @@ static int setup_rt_frame32(int sig, struct k_sigaction *ka, siginfo_t *info,
 	regs->gprs[15] = (__force __u64) frame;
 	/* Force 31 bit amode and default user address space control. */
 	regs->psw.mask = PSW_MASK_BA |
-		(psw_user_bits & PSW_MASK_ASC) |
+		(PSW_USER_BITS & PSW_MASK_ASC) |
 		(regs->psw.mask & ~PSW_MASK_ASC);
-	regs->psw.addr = (__u64) ka->sa.sa_handler;
+	regs->psw.addr = (__u64 __force) ka->sa.sa_handler;
 
 	regs->gprs[2] = map_signal(sig);
 	regs->gprs[3] = (__force __u64) &frame->info;
diff --git a/arch/s390/kernel/crash_dump.c b/arch/s390/kernel/crash_dump.c
index d8f3556..f45b2ab 100644
--- a/arch/s390/kernel/crash_dump.c
+++ b/arch/s390/kernel/crash_dump.c
@@ -16,11 +16,38 @@
 #include <asm/os_info.h>
 #include <asm/elf.h>
 #include <asm/ipl.h>
+#include <asm/sclp.h>
 
 #define PTR_ADD(x, y) (((char *) (x)) + ((unsigned long) (y)))
 #define PTR_SUB(x, y) (((char *) (x)) - ((unsigned long) (y)))
 #define PTR_DIFF(x, y) ((unsigned long)(((char *) (x)) - ((unsigned long) (y))))
 
+struct dump_save_areas dump_save_areas;
+
+/*
+ * Allocate and add a save area for a CPU
+ */
+struct save_area *dump_save_area_create(int cpu)
+{
+	struct save_area **save_areas, *save_area;
+
+	save_area = kmalloc(sizeof(*save_area), GFP_KERNEL);
+	if (!save_area)
+		return NULL;
+	if (cpu + 1 > dump_save_areas.count) {
+		dump_save_areas.count = cpu + 1;
+		save_areas = krealloc(dump_save_areas.areas,
+				      dump_save_areas.count * sizeof(void *),
+				      GFP_KERNEL | __GFP_ZERO);
+		if (!save_areas) {
+			kfree(save_area);
+			return NULL;
+		}
+		dump_save_areas.areas = save_areas;
+	}
+	dump_save_areas.areas[cpu] = save_area;
+	return save_area;
+}
 
 /*
  * Return physical address for virtual address
@@ -39,47 +66,68 @@ static inline void *load_real_addr(void *addr)
 }
 
 /*
- * Copy up to one page to vmalloc or real memory
+ * Copy real to virtual or real memory
  */
-static ssize_t copy_page_real(void *buf, void *src, size_t csize)
+static int copy_from_realmem(void *dest, void *src, size_t count)
 {
-	size_t size;
+	unsigned long size;
 
-	if (is_vmalloc_addr(buf)) {
-		BUG_ON(csize >= PAGE_SIZE);
-		/* If buf is not page aligned, copy first part */
-		size = min(roundup(__pa(buf), PAGE_SIZE) - __pa(buf), csize);
-		if (size) {
-			if (memcpy_real(load_real_addr(buf), src, size))
-				return -EFAULT;
-			buf += size;
-			src += size;
-		}
-		/* Copy second part */
-		size = csize - size;
-		return (size) ? memcpy_real(load_real_addr(buf), src, size) : 0;
+	if (!count)
+		return 0;
+	if (!is_vmalloc_or_module_addr(dest))
+		return memcpy_real(dest, src, count);
+	do {
+		size = min(count, PAGE_SIZE - (__pa(dest) & ~PAGE_MASK));
+		if (memcpy_real(load_real_addr(dest), src, size))
+			return -EFAULT;
+		count -= size;
+		dest += size;
+		src += size;
+	} while (count);
+	return 0;
+}
+
+/*
+ * Pointer to ELF header in new kernel
+ */
+static void *elfcorehdr_newmem;
+
+/*
+ * Copy one page from zfcpdump "oldmem"
+ *
+ * For pages below ZFCPDUMP_HSA_SIZE memory from the HSA is copied. Otherwise
+ * real memory copy is used.
+ */
+static ssize_t copy_oldmem_page_zfcpdump(char *buf, size_t csize,
+					 unsigned long src, int userbuf)
+{
+	int rc;
+
+	if (src < ZFCPDUMP_HSA_SIZE) {
+		rc = memcpy_hsa(buf, src, csize, userbuf);
 	} else {
-		return memcpy_real(buf, src, csize);
+		if (userbuf)
+			rc = copy_to_user_real((void __force __user *) buf,
+					       (void *) src, csize);
+		else
+			rc = memcpy_real(buf, (void *) src, csize);
 	}
+	return rc ? rc : csize;
 }
 
 /*
- * Copy one page from "oldmem"
+ * Copy one page from kdump "oldmem"
  *
  * For the kdump reserved memory this functions performs a swap operation:
  *  - [OLDMEM_BASE - OLDMEM_BASE + OLDMEM_SIZE] is mapped to [0 - OLDMEM_SIZE].
  *  - [0 - OLDMEM_SIZE] is mapped to [OLDMEM_BASE - OLDMEM_BASE + OLDMEM_SIZE]
  */
-ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
-			 size_t csize, unsigned long offset, int userbuf)
+static ssize_t copy_oldmem_page_kdump(char *buf, size_t csize,
+				      unsigned long src, int userbuf)
+
 {
-	unsigned long src;
 	int rc;
 
-	if (!csize)
-		return 0;
-
-	src = (pfn << PAGE_SHIFT) + offset;
 	if (src < OLDMEM_SIZE)
 		src += OLDMEM_BASE;
 	else if (src > OLDMEM_BASE &&
@@ -89,8 +137,89 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
 		rc = copy_to_user_real((void __force __user *) buf,
 				       (void *) src, csize);
 	else
-		rc = copy_page_real(buf, (void *) src, csize);
-	return (rc == 0) ? csize : rc;
+		rc = copy_from_realmem(buf, (void *) src, csize);
+	return (rc == 0) ? rc : csize;
+}
+
+/*
+ * Copy one page from "oldmem"
+ */
+ssize_t copy_oldmem_page(unsigned long pfn, char *buf, size_t csize,
+			 unsigned long offset, int userbuf)
+{
+	unsigned long src;
+
+	if (!csize)
+		return 0;
+	src = (pfn << PAGE_SHIFT) + offset;
+	if (OLDMEM_BASE)
+		return copy_oldmem_page_kdump(buf, csize, src, userbuf);
+	else
+		return copy_oldmem_page_zfcpdump(buf, csize, src, userbuf);
+}
+
+/*
+ * Remap "oldmem" for kdump
+ *
+ * For the kdump reserved memory this functions performs a swap operation:
+ * [0 - OLDMEM_SIZE] is mapped to [OLDMEM_BASE - OLDMEM_BASE + OLDMEM_SIZE]
+ */
+static int remap_oldmem_pfn_range_kdump(struct vm_area_struct *vma,
+					unsigned long from, unsigned long pfn,
+					unsigned long size, pgprot_t prot)
+{
+	unsigned long size_old;
+	int rc;
+
+	if (pfn < OLDMEM_SIZE >> PAGE_SHIFT) {
+		size_old = min(size, OLDMEM_SIZE - (pfn << PAGE_SHIFT));
+		rc = remap_pfn_range(vma, from,
+				     pfn + (OLDMEM_BASE >> PAGE_SHIFT),
+				     size_old, prot);
+		if (rc || size == size_old)
+			return rc;
+		size -= size_old;
+		from += size_old;
+		pfn += size_old >> PAGE_SHIFT;
+	}
+	return remap_pfn_range(vma, from, pfn, size, prot);
+}
+
+/*
+ * Remap "oldmem" for zfcpdump
+ *
+ * We only map available memory above ZFCPDUMP_HSA_SIZE. Memory below
+ * ZFCPDUMP_HSA_SIZE is read on demand using the copy_oldmem_page() function.
+ */
+static int remap_oldmem_pfn_range_zfcpdump(struct vm_area_struct *vma,
+					   unsigned long from,
+					   unsigned long pfn,
+					   unsigned long size, pgprot_t prot)
+{
+	unsigned long size_hsa;
+
+	if (pfn < ZFCPDUMP_HSA_SIZE >> PAGE_SHIFT) {
+		size_hsa = min(size, ZFCPDUMP_HSA_SIZE - (pfn << PAGE_SHIFT));
+		if (size == size_hsa)
+			return 0;
+		size -= size_hsa;
+		from += size_hsa;
+		pfn += size_hsa >> PAGE_SHIFT;
+	}
+	return remap_pfn_range(vma, from, pfn, size, prot);
+}
+
+/*
+ * Remap "oldmem" for kdump or zfcpdump
+ */
+int remap_oldmem_pfn_range(struct vm_area_struct *vma, unsigned long from,
+			   unsigned long pfn, unsigned long size, pgprot_t prot)
+{
+	if (OLDMEM_BASE)
+		return remap_oldmem_pfn_range_kdump(vma, from, pfn, size, prot);
+	else
+		return remap_oldmem_pfn_range_zfcpdump(vma, from, pfn, size,
+						       prot);
 }
 
 /*
@@ -101,13 +230,23 @@ int copy_from_oldmem(void *dest, void *src, size_t count)
 	unsigned long copied = 0;
 	int rc;
 
-	if ((unsigned long) src < OLDMEM_SIZE) {
-		copied = min(count, OLDMEM_SIZE - (unsigned long) src);
-		rc = memcpy_real(dest, src + OLDMEM_BASE, copied);
-		if (rc)
-			return rc;
+	if (OLDMEM_BASE) {
+		if ((unsigned long) src < OLDMEM_SIZE) {
+			copied = min(count, OLDMEM_SIZE - (unsigned long) src);
+			rc = copy_from_realmem(dest, src + OLDMEM_BASE, copied);
+			if (rc)
+				return rc;
+		}
+	} else {
+		if ((unsigned long) src < ZFCPDUMP_HSA_SIZE) {
+			copied = min(count,
+				     ZFCPDUMP_HSA_SIZE - (unsigned long) src);
+			rc = memcpy_hsa(dest, (unsigned long) src, copied, 0);
+			if (rc)
+				return rc;
+		}
 	}
-	return memcpy_real(dest + copied, src + copied, count - copied);
+	return copy_from_realmem(dest + copied, src + copied, count - copied);
 }
 
 /*
@@ -337,8 +476,8 @@ static int get_cpu_cnt(void)
 {
 	int i, cpus = 0;
 
-	for (i = 0; zfcpdump_save_areas[i]; i++) {
-		if (zfcpdump_save_areas[i]->pref_reg == 0)
+	for (i = 0; i < dump_save_areas.count; i++) {
+		if (dump_save_areas.areas[i]->pref_reg == 0)
 			continue;
 		cpus++;
 	}
@@ -368,14 +507,6 @@ static int get_mem_chunk_cnt(void)
 }
 
 /*
- * Relocate pointer in order to allow vmcore code access the data
- */
-static inline unsigned long relocate(unsigned long addr)
-{
-	return OLDMEM_BASE + addr;
-}
-
-/*
  * Initialize ELF loads (new kernel)
  */
 static int loads_init(Elf64_Phdr *phdr, u64 loads_offset)
@@ -417,8 +548,8 @@ static void *notes_init(Elf64_Phdr *phdr, void *ptr, u64 notes_offset)
 
 	ptr = nt_prpsinfo(ptr);
 
-	for (i = 0; zfcpdump_save_areas[i]; i++) {
-		sa = zfcpdump_save_areas[i];
+	for (i = 0; i < dump_save_areas.count; i++) {
+		sa = dump_save_areas.areas[i];
 		if (sa->pref_reg == 0)
 			continue;
 		ptr = fill_cpu_elf_notes(ptr, sa);
@@ -426,7 +557,7 @@ static void *notes_init(Elf64_Phdr *phdr, void *ptr, u64 notes_offset)
 	ptr = nt_vmcoreinfo(ptr);
 	memset(phdr, 0, sizeof(*phdr));
 	phdr->p_type = PT_NOTE;
-	phdr->p_offset = relocate(notes_offset);
+	phdr->p_offset = notes_offset;
 	phdr->p_filesz = (unsigned long) PTR_SUB(ptr, ptr_start);
 	phdr->p_memsz = phdr->p_filesz;
 	return ptr;
@@ -435,7 +566,7 @@ static void *notes_init(Elf64_Phdr *phdr, void *ptr, u64 notes_offset)
 /*
  * Create ELF core header (new kernel)
  */
-static void s390_elf_corehdr_create(char **elfcorebuf, size_t *elfcorebuf_sz)
+int elfcorehdr_alloc(unsigned long long *addr, unsigned long long *size)
 {
 	Elf64_Phdr *phdr_notes, *phdr_loads;
 	int mem_chunk_cnt;
@@ -443,6 +574,12 @@ static void s390_elf_corehdr_create(char **elfcorebuf, size_t *elfcorebuf_sz)
 	u32 alloc_size;
 	u64 hdr_off;
 
+	/* If we are not in kdump or zfcpdump mode return */
+	if (!OLDMEM_BASE && ipl_info.type != IPL_TYPE_FCP_DUMP)
+		return 0;
+	/* If elfcorehdr= has been passed via cmdline, we use that one */
+	if (elfcorehdr_addr != ELFCORE_ADDR_MAX)
+		return 0;
 	mem_chunk_cnt = get_mem_chunk_cnt();
 
 	alloc_size = 0x1000 + get_cpu_cnt() * 0x300 +
@@ -460,27 +597,52 @@ static void s390_elf_corehdr_create(char **elfcorebuf, size_t *elfcorebuf_sz)
 	ptr = notes_init(phdr_notes, ptr, ((unsigned long) hdr) + hdr_off);
 	/* Init loads */
 	hdr_off = PTR_DIFF(ptr, hdr);
-	loads_init(phdr_loads, ((unsigned long) hdr) + hdr_off);
-	*elfcorebuf_sz = hdr_off;
-	*elfcorebuf = (void *) relocate((unsigned long) hdr);
-	BUG_ON(*elfcorebuf_sz > alloc_size);
+	loads_init(phdr_loads, hdr_off);
+	*addr = (unsigned long long) hdr;
+	elfcorehdr_newmem = hdr;
+	*size = (unsigned long long) hdr_off;
+	BUG_ON(elfcorehdr_size > alloc_size);
+	return 0;
 }
 
 /*
- * Create kdump ELF core header in new kernel, if it has not been passed via
- * the "elfcorehdr" kernel parameter
+ * Free ELF core header (new kernel)
  */
-static int setup_kdump_elfcorehdr(void)
+void elfcorehdr_free(unsigned long long addr)
 {
-	size_t elfcorebuf_sz;
-	char *elfcorebuf;
+	if (!elfcorehdr_newmem)
+		return;
+	kfree((void *)(unsigned long)addr);
+}
 
-	if (!OLDMEM_BASE || is_kdump_kernel())
-		return -EINVAL;
-	s390_elf_corehdr_create(&elfcorebuf, &elfcorebuf_sz);
-	elfcorehdr_addr = (unsigned long long) elfcorebuf;
-	elfcorehdr_size = elfcorebuf_sz;
-	return 0;
+/*
+ * Read from ELF header
+ */
+ssize_t elfcorehdr_read(char *buf, size_t count, u64 *ppos)
+{
+	void *src = (void *)(unsigned long)*ppos;
+
+	src = elfcorehdr_newmem ? src : src - OLDMEM_BASE;
+	memcpy(buf, src, count);
+	*ppos += count;
+	return count;
 }
 
-subsys_initcall(setup_kdump_elfcorehdr);
+/*
+ * Read from ELF notes data
+ */
+ssize_t elfcorehdr_read_notes(char *buf, size_t count, u64 *ppos)
+{
+	void *src = (void *)(unsigned long)*ppos;
+	int rc;
+
+	if (elfcorehdr_newmem) {
+		memcpy(buf, src, count);
+	} else {
+		rc = copy_from_oldmem(buf, src, count);
+		if (rc)
+			return rc;
+	}
+	*ppos += count;
+	return count;
+}
diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index f1279dc..ee8390d 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -867,7 +867,7 @@ static inline void
 debug_finish_entry(debug_info_t * id, debug_entry_t* active, int level,
 			int exception)
 {
-	active->id.stck = get_tod_clock();
+	active->id.stck = get_tod_clock_fast();
 	active->id.fields.cpuid = smp_processor_id();
 	active->caller = __builtin_return_address(0);
 	active->id.fields.exception = exception;
@@ -889,7 +889,7 @@ static int debug_active=1;
  * if debug_active is already off
  */
 static int
-s390dbf_procactive(ctl_table *table, int write,
+s390dbf_procactive(struct ctl_table *table, int write,
                      void __user *buffer, size_t *lenp, loff_t *ppos)
 {
 	if (!write || debug_stoppable || !debug_active)
diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c
index be87d3e..993efe6 100644
--- a/arch/s390/kernel/dis.c
+++ b/arch/s390/kernel/dis.c
@@ -23,6 +23,7 @@
 #include <linux/kdebug.h>
 
 #include <asm/uaccess.h>
+#include <asm/dis.h>
 #include <asm/io.h>
 #include <linux/atomic.h>
 #include <asm/mathemu.h>
@@ -37,17 +38,6 @@
 #define ONELONG "%016lx: "
 #endif /* CONFIG_64BIT */
 
-#define OPERAND_GPR	0x1	/* Operand printed as %rx */
-#define OPERAND_FPR	0x2	/* Operand printed as %fx */
-#define OPERAND_AR	0x4	/* Operand printed as %ax */
-#define OPERAND_CR	0x8	/* Operand printed as %cx */
-#define OPERAND_DISP	0x10	/* Operand printed as displacement */
-#define OPERAND_BASE	0x20	/* Operand printed as base register */
-#define OPERAND_INDEX	0x40	/* Operand printed as index register */
-#define OPERAND_PCREL	0x80	/* Operand printed as pc-relative symbol */
-#define OPERAND_SIGNED	0x100	/* Operand printed as signed value */
-#define OPERAND_LENGTH	0x200	/* Operand printed as length (+1) */
-
 enum {
 	UNUSED,	/* Indicates the end of the operand list */
 	R_8,	/* GPR starting at position 8 */
@@ -155,19 +145,7 @@ enum {
 	INSTR_S_00, INSTR_S_RD,
 };
 
-struct operand {
-	int bits;		/* The number of bits in the operand. */
-	int shift;		/* The number of bits to shift. */
-	int flags;		/* One bit syntax flags. */
-};
-
-struct insn {
-	const char name[5];
-	unsigned char opfrag;
-	unsigned char format;
-};
-
-static const struct operand operands[] =
+static const struct s390_operand operands[] =
 {
 	[UNUSED]  = { 0, 0, 0 },
 	[R_8]	 = {  4,  8, OPERAND_GPR },
@@ -479,7 +457,7 @@ static char *long_insn_name[] = {
 	[LONG_INSN_PCISTB] = "pcistb",
 };
 
-static struct insn opcode[] = {
+static struct s390_insn opcode[] = {
 #ifdef CONFIG_64BIT
 	{ "bprp", 0xc5, INSTR_MII_UPI },
 	{ "bpp", 0xc7, INSTR_SMI_U0RDP },
@@ -668,7 +646,7 @@ static struct insn opcode[] = {
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_01[] = {
+static struct s390_insn opcode_01[] = {
 #ifdef CONFIG_64BIT
 	{ "ptff", 0x04, INSTR_E },
 	{ "pfpo", 0x0a, INSTR_E },
@@ -684,7 +662,7 @@ static struct insn opcode_01[] = {
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_a5[] = {
+static struct s390_insn opcode_a5[] = {
 #ifdef CONFIG_64BIT
 	{ "iihh", 0x00, INSTR_RI_RU },
 	{ "iihl", 0x01, INSTR_RI_RU },
@@ -706,7 +684,7 @@ static struct insn opcode_a5[] = {
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_a7[] = {
+static struct s390_insn opcode_a7[] = {
 #ifdef CONFIG_64BIT
 	{ "tmhh", 0x02, INSTR_RI_RU },
 	{ "tmhl", 0x03, INSTR_RI_RU },
@@ -728,7 +706,7 @@ static struct insn opcode_a7[] = {
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_aa[] = {
+static struct s390_insn opcode_aa[] = {
 #ifdef CONFIG_64BIT
 	{ { 0, LONG_INSN_RINEXT }, 0x00, INSTR_RI_RI },
 	{ "rion", 0x01, INSTR_RI_RI },
@@ -739,7 +717,7 @@ static struct insn opcode_aa[] = {
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_b2[] = {
+static struct s390_insn opcode_b2[] = {
 #ifdef CONFIG_64BIT
 	{ "stckf", 0x7c, INSTR_S_RD },
 	{ "lpp", 0x80, INSTR_S_RD },
@@ -851,7 +829,7 @@ static struct insn opcode_b2[] = {
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_b3[] = {
+static struct s390_insn opcode_b3[] = {
 #ifdef CONFIG_64BIT
 	{ "maylr", 0x38, INSTR_RRF_F0FF },
 	{ "mylr", 0x39, INSTR_RRF_F0FF },
@@ -1034,7 +1012,7 @@ static struct insn opcode_b3[] = {
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_b9[] = {
+static struct s390_insn opcode_b9[] = {
 #ifdef CONFIG_64BIT
 	{ "lpgr", 0x00, INSTR_RRE_RR },
 	{ "lngr", 0x01, INSTR_RRE_RR },
@@ -1167,7 +1145,7 @@ static struct insn opcode_b9[] = {
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_c0[] = {
+static struct s390_insn opcode_c0[] = {
 #ifdef CONFIG_64BIT
 	{ "lgfi", 0x01, INSTR_RIL_RI },
 	{ "xihf", 0x06, INSTR_RIL_RU },
@@ -1187,7 +1165,7 @@ static struct insn opcode_c0[] = {
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_c2[] = {
+static struct s390_insn opcode_c2[] = {
 #ifdef CONFIG_64BIT
 	{ "msgfi", 0x00, INSTR_RIL_RI },
 	{ "msfi", 0x01, INSTR_RIL_RI },
@@ -1205,7 +1183,7 @@ static struct insn opcode_c2[] = {
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_c4[] = {
+static struct s390_insn opcode_c4[] = {
 #ifdef CONFIG_64BIT
 	{ "llhrl", 0x02, INSTR_RIL_RP },
 	{ "lghrl", 0x04, INSTR_RIL_RP },
@@ -1222,7 +1200,7 @@ static struct insn opcode_c4[] = {
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_c6[] = {
+static struct s390_insn opcode_c6[] = {
 #ifdef CONFIG_64BIT
 	{ "exrl", 0x00, INSTR_RIL_RP },
 	{ "pfdrl", 0x02, INSTR_RIL_UP },
@@ -1240,7 +1218,7 @@ static struct insn opcode_c6[] = {
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_c8[] = {
+static struct s390_insn opcode_c8[] = {
 #ifdef CONFIG_64BIT
 	{ "mvcos", 0x00, INSTR_SSF_RRDRD },
 	{ "ectg", 0x01, INSTR_SSF_RRDRD },
@@ -1251,7 +1229,7 @@ static struct insn opcode_c8[] = {
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_cc[] = {
+static struct s390_insn opcode_cc[] = {
 #ifdef CONFIG_64BIT
 	{ "brcth", 0x06, INSTR_RIL_RP },
 	{ "aih", 0x08, INSTR_RIL_RI },
@@ -1263,7 +1241,7 @@ static struct insn opcode_cc[] = {
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_e3[] = {
+static struct s390_insn opcode_e3[] = {
 #ifdef CONFIG_64BIT
 	{ "ltg", 0x02, INSTR_RXY_RRRD },
 	{ "lrag", 0x03, INSTR_RXY_RRRD },
@@ -1369,7 +1347,7 @@ static struct insn opcode_e3[] = {
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_e5[] = {
+static struct s390_insn opcode_e5[] = {
 #ifdef CONFIG_64BIT
 	{ "strag", 0x02, INSTR_SSE_RDRD },
 	{ "mvhhi", 0x44, INSTR_SIL_RDI },
@@ -1391,7 +1369,7 @@ static struct insn opcode_e5[] = {
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_eb[] = {
+static struct s390_insn opcode_eb[] = {
 #ifdef CONFIG_64BIT
 	{ "lmg", 0x04, INSTR_RSY_RRRD },
 	{ "srag", 0x0a, INSTR_RSY_RRRD },
@@ -1465,7 +1443,7 @@ static struct insn opcode_eb[] = {
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_ec[] = {
+static struct s390_insn opcode_ec[] = {
 #ifdef CONFIG_64BIT
 	{ "brxhg", 0x44, INSTR_RIE_RRP },
 	{ "brxlg", 0x45, INSTR_RIE_RRP },
@@ -1504,7 +1482,7 @@ static struct insn opcode_ec[] = {
 	{ "", 0, INSTR_INVALID }
 };
 
-static struct insn opcode_ed[] = {
+static struct s390_insn opcode_ed[] = {
 #ifdef CONFIG_64BIT
 	{ "mayl", 0x38, INSTR_RXF_FRRDF },
 	{ "myl", 0x39, INSTR_RXF_FRRDF },
@@ -1572,7 +1550,7 @@ static struct insn opcode_ed[] = {
 
 /* Extracts an operand value from an instruction.  */
 static unsigned int extract_operand(unsigned char *code,
-				    const struct operand *operand)
+				    const struct s390_operand *operand)
 {
 	unsigned int val;
 	int bits;
@@ -1608,16 +1586,11 @@ static unsigned int extract_operand(unsigned char *code,
 	return val;
 }
 
-static inline int insn_length(unsigned char code)
-{
-	return ((((int) code + 64) >> 7) + 1) << 1;
-}
-
-static struct insn *find_insn(unsigned char *code)
+struct s390_insn *find_insn(unsigned char *code)
 {
 	unsigned char opfrag = code[1];
 	unsigned char opmask;
-	struct insn *table;
+	struct s390_insn *table;
 
 	switch (code[0]) {
 	case 0x01:
@@ -1706,7 +1679,7 @@ static struct insn *find_insn(unsigned char *code)
  */
 int insn_to_mnemonic(unsigned char *instruction, char *buf, unsigned int len)
 {
-	struct insn *insn;
+	struct s390_insn *insn;
 
 	insn = find_insn(instruction);
 	if (!insn)
@@ -1722,9 +1695,9 @@ EXPORT_SYMBOL_GPL(insn_to_mnemonic);
 
 static int print_insn(char *buffer, unsigned char *code, unsigned long addr)
 {
-	struct insn *insn;
+	struct s390_insn *insn;
 	const unsigned char *ops;
-	const struct operand *operand;
+	const struct s390_operand *operand;
 	unsigned int value;
 	char separator;
 	char *ptr;
diff --git a/arch/s390/kernel/dumpstack.c b/arch/s390/kernel/dumpstack.c
index 87acc38..e6af940 100644
--- a/arch/s390/kernel/dumpstack.c
+++ b/arch/s390/kernel/dumpstack.c
@@ -15,6 +15,7 @@
 #include <linux/sched.h>
 #include <asm/processor.h>
 #include <asm/debug.h>
+#include <asm/dis.h>
 #include <asm/ipl.h>
 
 #ifndef CONFIG_64BIT
@@ -40,14 +41,15 @@ __show_trace(unsigned long sp, unsigned long low, unsigned long high)
 {
 	struct stack_frame *sf;
 	struct pt_regs *regs;
+	unsigned long addr;
 
 	while (1) {
 		sp = sp & PSW_ADDR_INSN;
 		if (sp < low || sp > high - sizeof(*sf))
 			return sp;
 		sf = (struct stack_frame *) sp;
-		printk("([<%016lx>] ", sf->gprs[8] & PSW_ADDR_INSN);
-		print_symbol("%s)\n", sf->gprs[8] & PSW_ADDR_INSN);
+		addr = sf->gprs[8] & PSW_ADDR_INSN;
+		printk("([<%016lx>] %pSR)\n", addr, (void *)addr);
 		/* Follow the backchain. */
 		while (1) {
 			low = sp;
@@ -57,16 +59,16 @@ __show_trace(unsigned long sp, unsigned long low, unsigned long high)
 			if (sp <= low || sp > high - sizeof(*sf))
 				return sp;
 			sf = (struct stack_frame *) sp;
-			printk(" [<%016lx>] ", sf->gprs[8] & PSW_ADDR_INSN);
-			print_symbol("%s\n", sf->gprs[8] & PSW_ADDR_INSN);
+			addr = sf->gprs[8] & PSW_ADDR_INSN;
+			printk(" [<%016lx>] %pSR\n", addr, (void *)addr);
 		}
 		/* Zero backchain detected, check for interrupt frame. */
 		sp = (unsigned long) (sf + 1);
 		if (sp <= low || sp > high - sizeof(*regs))
 			return sp;
 		regs = (struct pt_regs *) sp;
-		printk(" [<%016lx>] ", regs->psw.addr & PSW_ADDR_INSN);
-		print_symbol("%s\n", regs->psw.addr & PSW_ADDR_INSN);
+		addr = regs->psw.addr & PSW_ADDR_INSN;
+		printk(" [<%016lx>] %pSR\n", addr, (void *)addr);
 		low = sp;
 		sp = regs->gprs[15];
 	}
@@ -128,8 +130,7 @@ static void show_last_breaking_event(struct pt_regs *regs)
 {
 #ifdef CONFIG_64BIT
 	printk("Last Breaking-Event-Address:\n");
-	printk(" [<%016lx>] ", regs->args[0] & PSW_ADDR_INSN);
-	print_symbol("%s\n", regs->args[0] & PSW_ADDR_INSN);
+	printk(" [<%016lx>] %pSR\n", regs->args[0], (void *)regs->args[0]);
 #endif
 }
 
@@ -143,10 +144,10 @@ void show_registers(struct pt_regs *regs)
 	char *mode;
 
 	mode = user_mode(regs) ? "User" : "Krnl";
-	printk("%s PSW : %p %p",
+	printk("%s PSW : %p %p (%pSR)\n",
 	       mode, (void *) regs->psw.mask,
+	       (void *) regs->psw.addr,
 	       (void *) regs->psw.addr);
-	print_symbol(" (%s)\n", regs->psw.addr & PSW_ADDR_INSN);
 	printk("           R:%x T:%x IO:%x EX:%x Key:%x M:%x W:%x "
 	       "P:%x AS:%x CC:%x PM:%x", mask_bits(regs, PSW_MASK_PER),
 	       mask_bits(regs, PSW_MASK_DAT), mask_bits(regs, PSW_MASK_IO),
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index dc8770d..96543ac 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -206,6 +206,7 @@ static noinline __init void clear_bss_section(void)
  */
 static noinline __init void init_kernel_storage_key(void)
 {
+#if PAGE_DEFAULT_KEY
 	unsigned long end_pfn, init_pfn;
 
 	end_pfn = PFN_UP(__pa(&_end));
@@ -213,6 +214,7 @@ static noinline __init void init_kernel_storage_key(void)
 	for (init_pfn = 0 ; init_pfn < end_pfn; init_pfn++)
 		page_set_storage_key(init_pfn << PAGE_SHIFT,
 				     PAGE_DEFAULT_KEY, 0);
+#endif
 }
 
 static __initdata char sysinfo_page[PAGE_SIZE] __aligned(PAGE_SIZE);
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index be7a408..0dc2b6d 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -18,6 +18,7 @@
 #include <asm/unistd.h>
 #include <asm/page.h>
 #include <asm/sigp.h>
+#include <asm/irq.h>
 
 __PT_R0      =	__PT_GPRS
 __PT_R1      =	__PT_GPRS + 4
@@ -265,6 +266,7 @@ sysc_sigpending:
 	tm	__TI_flags+3(%r12),_TIF_SYSCALL
 	jno	sysc_return
 	lm	%r2,%r7,__PT_R2(%r11)	# load svc arguments
+	l	%r10,__TI_sysc_table(%r12)	# 31 bit system call table
 	xr	%r8,%r8			# svc 0 returns -ENOSYS
 	clc	__PT_INT_CODE+2(2,%r11),BASED(.Lnr_syscalls+2)
 	jnl	sysc_nr_ok		# invalid svc number -> do svc 0
@@ -435,6 +437,11 @@ io_skip:
 io_loop:
 	l	%r1,BASED(.Ldo_IRQ)
 	lr	%r2,%r11		# pass pointer to pt_regs
+	lhi	%r3,IO_INTERRUPT
+	tm	__PT_INT_CODE+8(%r11),0x80	# adapter interrupt ?
+	jz	io_call
+	lhi	%r3,THIN_INTERRUPT
+io_call:
 	basr	%r14,%r1		# call do_IRQ
 	tm	__LC_MACHINE_FLAGS+2,0x10	# MACHINE_FLAG_LPAR
 	jz	io_return
@@ -584,9 +591,10 @@ ext_skip:
 	mvc	__PT_INT_CODE(4,%r11),__LC_EXT_CPU_ADDR
 	mvc	__PT_INT_PARM(4,%r11),__LC_EXT_PARAMS
 	TRACE_IRQS_OFF
+	l	%r1,BASED(.Ldo_IRQ)
 	lr	%r2,%r11		# pass pointer to pt_regs
-	l	%r1,BASED(.Ldo_extint)
-	basr	%r14,%r1		# call do_extint
+	lhi	%r3,EXT_INTERRUPT
+	basr	%r14,%r1		# call do_IRQ
 	j	io_return
 
 /*
@@ -879,13 +887,13 @@ cleanup_idle:
 	stm	%r9,%r10,__LC_SYSTEM_TIMER
 	mvc	__LC_LAST_UPDATE_TIMER(8),__TIMER_IDLE_EXIT(%r2)
 	# prepare return psw
-	n	%r8,BASED(cleanup_idle_wait)	# clear wait state bit
+	n	%r8,BASED(cleanup_idle_wait)	# clear irq & wait state bits
 	l	%r9,24(%r11)			# return from psw_idle
 	br	%r14
 cleanup_idle_insn:
 	.long	psw_idle_lpsw + 0x80000000
 cleanup_idle_wait:
-	.long	0xfffdffff
+	.long	0xfcfdffff
 
 /*
  * Integer constants
@@ -902,7 +910,6 @@ cleanup_idle_wait:
 .Ldo_machine_check:	.long	s390_do_machine_check
 .Lhandle_mcck:		.long	s390_handle_mcck
 .Ldo_IRQ:		.long	do_IRQ
-.Ldo_extint:		.long	do_extint
 .Ldo_signal:		.long	do_signal
 .Ldo_notify_resume:	.long	do_notify_resume
 .Ldo_per_trap:		.long	do_per_trap
diff --git a/arch/s390/kernel/entry.h b/arch/s390/kernel/entry.h
index 3ddbc26..cb533f7 100644
--- a/arch/s390/kernel/entry.h
+++ b/arch/s390/kernel/entry.h
@@ -23,7 +23,6 @@ asmlinkage void do_syscall_trace_exit(struct pt_regs *regs);
 
 void do_protection_exception(struct pt_regs *regs);
 void do_dat_exception(struct pt_regs *regs);
-void do_asce_exception(struct pt_regs *regs);
 
 void addressing_exception(struct pt_regs *regs);
 void data_exception(struct pt_regs *regs);
@@ -53,27 +52,21 @@ void handle_signal32(unsigned long sig, struct k_sigaction *ka,
 		    siginfo_t *info, sigset_t *oldset, struct pt_regs *regs);
 void do_notify_resume(struct pt_regs *regs);
 
-struct ext_code;
-void do_extint(struct pt_regs *regs);
+void __init init_IRQ(void);
+void do_IRQ(struct pt_regs *regs, int irq);
 void do_restart(void);
 void __init startup_init(void);
 void die(struct pt_regs *regs, const char *str);
-
+int setup_profiling_timer(unsigned int multiplier);
 void __init time_init(void);
+int pfn_is_nosave(unsigned long);
+void s390_early_resume(void);
+unsigned long prepare_ftrace_return(unsigned long parent, unsigned long ip);
 
 struct s390_mmap_arg_struct;
 struct fadvise64_64_args;
 struct old_sigaction;
 
-long sys_mmap2(struct s390_mmap_arg_struct __user  *arg);
-long sys_s390_ipc(uint call, int first, unsigned long second,
-	     unsigned long third, void __user *ptr);
-long sys_s390_personality(unsigned int personality);
-long sys_s390_fadvise64(int fd, u32 offset_high, u32 offset_low,
-		    size_t len, int advice);
-long sys_s390_fadvise64_64(struct fadvise64_64_args __user *args);
-long sys_s390_fallocate(int fd, int mode, loff_t offset, u32 len_high,
-			u32 len_low);
 long sys_sigreturn(void);
 long sys_rt_sigreturn(void);
 long sys32_sigreturn(void);
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index 1c039d0..e5b43c9 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -19,6 +19,7 @@
 #include <asm/unistd.h>
 #include <asm/page.h>
 #include <asm/sigp.h>
+#include <asm/irq.h>
 
 __PT_R0      =	__PT_GPRS
 __PT_R1      =	__PT_GPRS + 8
@@ -296,6 +297,7 @@ sysc_sigpending:
 	tm	__TI_flags+7(%r12),_TIF_SYSCALL
 	jno	sysc_return
 	lmg	%r2,%r7,__PT_R2(%r11)	# load svc arguments
+	lg	%r10,__TI_sysc_table(%r12)	# address of system call table
 	lghi	%r8,0			# svc 0 returns -ENOSYS
 	llgh	%r1,__PT_INT_CODE+2(%r11)	# load new svc number
 	cghi	%r1,NR_syscalls
@@ -468,6 +470,11 @@ io_skip:
 	xc	__SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
 io_loop:
 	lgr	%r2,%r11		# pass pointer to pt_regs
+	lghi	%r3,IO_INTERRUPT
+	tm	__PT_INT_CODE+8(%r11),0x80	# adapter interrupt ?
+	jz	io_call
+	lghi	%r3,THIN_INTERRUPT
+io_call:
 	brasl	%r14,do_IRQ
 	tm	__LC_MACHINE_FLAGS+6,0x10	# MACHINE_FLAG_LPAR
 	jz	io_return
@@ -623,7 +630,8 @@ ext_skip:
 	TRACE_IRQS_OFF
 	xc	__SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
 	lgr	%r2,%r11		# pass pointer to pt_regs
-	brasl	%r14,do_extint
+	lghi	%r3,EXT_INTERRUPT
+	brasl	%r14,do_IRQ
 	j	io_return
 
 /*
@@ -922,7 +930,7 @@ cleanup_idle:
 	stg	%r9,__LC_SYSTEM_TIMER
 	mvc	__LC_LAST_UPDATE_TIMER(8),__TIMER_IDLE_EXIT(%r2)
 	# prepare return psw
-	nihh	%r8,0xfffd		# clear wait state bit
+	nihh	%r8,0xfcfd		# clear irq & wait state bits
 	lg	%r9,48(%r11)		# return from psw_idle
 	br	%r14
 cleanup_idle_insn:
diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c
index e3043ae..224db03 100644
--- a/arch/s390/kernel/ftrace.c
+++ b/arch/s390/kernel/ftrace.c
@@ -15,6 +15,7 @@
 #include <linux/kprobes.h>
 #include <trace/syscall.h>
 #include <asm/asm-offsets.h>
+#include "entry.h"
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 
@@ -150,14 +151,13 @@ unsigned long __kprobes prepare_ftrace_return(unsigned long parent,
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		goto out;
 	ip = (ip & PSW_ADDR_INSN) - MCOUNT_INSN_SIZE;
-	if (ftrace_push_return_trace(parent, ip, &trace.depth, 0) == -EBUSY)
-		goto out;
 	trace.func = ip;
+	trace.depth = current->curr_ret_stack + 1;
 	/* Only trace if the calling function expects to. */
-	if (!ftrace_graph_entry(&trace)) {
-		current->curr_ret_stack--;
+	if (!ftrace_graph_entry(&trace))
+		goto out;
+	if (ftrace_push_return_trace(parent, ip, &trace.depth, 0) == -EBUSY)
 		goto out;
-	}
 	parent = (unsigned long) return_to_handler;
 out:
 	return parent;
@@ -177,7 +177,7 @@ int ftrace_enable_ftrace_graph_caller(void)
 
 	offset = ((void *) prepare_ftrace_return -
 		  (void *) ftrace_graph_caller) / 2;
-	return probe_kernel_write(ftrace_graph_caller + 2,
+	return probe_kernel_write((void *) ftrace_graph_caller + 2,
 				  &offset, sizeof(offset));
 }
 
@@ -185,7 +185,7 @@ int ftrace_disable_ftrace_graph_caller(void)
 {
 	static unsigned short offset = 0x0002;
 
-	return probe_kernel_write(ftrace_graph_caller + 2,
+	return probe_kernel_write((void *) ftrace_graph_caller + 2,
 				  &offset, sizeof(offset));
 }
 
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index fd8db63..429afcc 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -437,7 +437,7 @@ ENTRY(startup_kdump)
 
 #if defined(CONFIG_64BIT)
 #if defined(CONFIG_MARCH_ZEC12)
-	.long 3, 0xc100efe3, 0xf46ce000, 0x00400000
+	.long 3, 0xc100efe3, 0xf46ce800, 0x00400000
 #elif defined(CONFIG_MARCH_Z196)
 	.long 2, 0xc100efe3, 0xf46c0000
 #elif defined(CONFIG_MARCH_Z10)
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index feb719d..633ca75 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -2051,12 +2051,12 @@ void s390_reset_system(void (*func)(void *), void *data)
 	__ctl_clear_bit(0,28);
 
 	/* Set new machine check handler */
-	S390_lowcore.mcck_new_psw.mask = psw_kernel_bits | PSW_MASK_DAT;
+	S390_lowcore.mcck_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_DAT;
 	S390_lowcore.mcck_new_psw.addr =
 		PSW_ADDR_AMODE | (unsigned long) s390_base_mcck_handler;
 
 	/* Set new program check handler */
-	S390_lowcore.program_new_psw.mask = psw_kernel_bits | PSW_MASK_DAT;
+	S390_lowcore.program_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_DAT;
 	S390_lowcore.program_new_psw.addr =
 		PSW_ADDR_AMODE | (unsigned long) s390_base_pgm_handler;
 
diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c
index 54b0995..8ac2097 100644
--- a/arch/s390/kernel/irq.c
+++ b/arch/s390/kernel/irq.c
@@ -22,6 +22,7 @@
 #include <asm/cputime.h>
 #include <asm/lowcore.h>
 #include <asm/irq.h>
+#include <asm/hw_irq.h>
 #include "entry.h"
 
 DEFINE_PER_CPU_SHARED_ALIGNED(struct irq_stat, irq_stat);
@@ -42,9 +43,10 @@ struct irq_class {
  * Since the external and I/O interrupt fields are already sums we would end
  * up with having a sum which accounts each interrupt twice.
  */
-static const struct irq_class irqclass_main_desc[NR_IRQS] = {
-	[EXTERNAL_INTERRUPT] = {.name = "EXT"},
-	[IO_INTERRUPT]	     = {.name = "I/O"}
+static const struct irq_class irqclass_main_desc[NR_IRQS_BASE] = {
+	[EXT_INTERRUPT]  = {.name = "EXT"},
+	[IO_INTERRUPT]	 = {.name = "I/O"},
+	[THIN_INTERRUPT] = {.name = "AIO"},
 };
 
 /*
@@ -86,6 +88,28 @@ static const struct irq_class irqclass_sub_desc[NR_ARCH_IRQS] = {
 	[CPU_RST]    = {.name = "RST", .desc = "[CPU] CPU Restart"},
 };
 
+void __init init_IRQ(void)
+{
+	irq_reserve_irqs(0, THIN_INTERRUPT);
+	init_cio_interrupts();
+	init_airq_interrupts();
+	init_ext_interrupts();
+}
+
+void do_IRQ(struct pt_regs *regs, int irq)
+{
+	struct pt_regs *old_regs;
+
+	old_regs = set_irq_regs(regs);
+	irq_enter();
+	if (S390_lowcore.int_clock >= S390_lowcore.clock_comparator)
+		/* Serve timer interrupts first. */
+		clock_comparator_work();
+	generic_handle_irq(irq);
+	irq_exit();
+	set_irq_regs(old_regs);
+}
+
 /*
  * show_interrupts is needed by /proc/interrupts.
  */
@@ -100,27 +124,36 @@ int show_interrupts(struct seq_file *p, void *v)
 		for_each_online_cpu(cpu)
 			seq_printf(p, "CPU%d       ", cpu);
 		seq_putc(p, '\n');
+		goto out;
 	}
 	if (irq < NR_IRQS) {
+		if (irq >= NR_IRQS_BASE)
+			goto out;
 		seq_printf(p, "%s: ", irqclass_main_desc[irq].name);
 		for_each_online_cpu(cpu)
-			seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[irq]);
+			seq_printf(p, "%10u ", kstat_irqs_cpu(irq, cpu));
 		seq_putc(p, '\n');
-		goto skip_arch_irqs;
+		goto out;
 	}
 	for (irq = 0; irq < NR_ARCH_IRQS; irq++) {
 		seq_printf(p, "%s: ", irqclass_sub_desc[irq].name);
 		for_each_online_cpu(cpu)
-			seq_printf(p, "%10u ", per_cpu(irq_stat, cpu).irqs[irq]);
+			seq_printf(p, "%10u ",
+				   per_cpu(irq_stat, cpu).irqs[irq]);
 		if (irqclass_sub_desc[irq].desc)
 			seq_printf(p, "  %s", irqclass_sub_desc[irq].desc);
 		seq_putc(p, '\n');
 	}
-skip_arch_irqs:
+out:
 	put_online_cpus();
 	return 0;
 }
 
+int arch_show_interrupts(struct seq_file *p, int prec)
+{
+	return 0;
+}
+
 /*
  * Switch to the asynchronous interrupt stack for softirq execution.
  */
@@ -159,41 +192,27 @@ asmlinkage void do_softirq(void)
 	local_irq_restore(flags);
 }
 
-#ifdef CONFIG_PROC_FS
-void init_irq_proc(void)
-{
-	if (proc_mkdir("irq", NULL))
-		create_prof_cpu_mask();
-}
-#endif
-
 /*
  * ext_int_hash[index] is the list head for all external interrupts that hash
  * to this index.
  */
-static struct list_head ext_int_hash[256];
+static struct hlist_head ext_int_hash[32] ____cacheline_aligned;
 
 struct ext_int_info {
 	ext_int_handler_t handler;
-	u16 code;
-	struct list_head entry;
+	struct hlist_node entry;
 	struct rcu_head rcu;
+	u16 code;
 };
 
 /* ext_int_hash_lock protects the handler lists for external interrupts */
-DEFINE_SPINLOCK(ext_int_hash_lock);
-
-static void __init init_external_interrupts(void)
-{
-	int idx;
-
-	for (idx = 0; idx < ARRAY_SIZE(ext_int_hash); idx++)
-		INIT_LIST_HEAD(&ext_int_hash[idx]);
-}
+static DEFINE_SPINLOCK(ext_int_hash_lock);
 
 static inline int ext_hash(u16 code)
 {
-	return (code + (code >> 9)) & 0xff;
+	BUILD_BUG_ON(!is_power_of_2(ARRAY_SIZE(ext_int_hash)));
+
+	return (code + (code >> 9)) & (ARRAY_SIZE(ext_int_hash) - 1);
 }
 
 int register_external_interrupt(u16 code, ext_int_handler_t handler)
@@ -210,7 +229,7 @@ int register_external_interrupt(u16 code, ext_int_handler_t handler)
 	index = ext_hash(code);
 
 	spin_lock_irqsave(&ext_int_hash_lock, flags);
-	list_add_rcu(&p->entry, &ext_int_hash[index]);
+	hlist_add_head_rcu(&p->entry, &ext_int_hash[index]);
 	spin_unlock_irqrestore(&ext_int_hash_lock, flags);
 	return 0;
 }
@@ -223,9 +242,9 @@ int unregister_external_interrupt(u16 code, ext_int_handler_t handler)
 	int index = ext_hash(code);
 
 	spin_lock_irqsave(&ext_int_hash_lock, flags);
-	list_for_each_entry_rcu(p, &ext_int_hash[index], entry) {
+	hlist_for_each_entry_rcu(p, &ext_int_hash[index], entry) {
 		if (p->code == code && p->handler == handler) {
-			list_del_rcu(&p->entry);
+			hlist_del_rcu(&p->entry);
 			kfree_rcu(p, rcu);
 		}
 	}
@@ -234,148 +253,64 @@ int unregister_external_interrupt(u16 code, ext_int_handler_t handler)
 }
 EXPORT_SYMBOL(unregister_external_interrupt);
 
-void __irq_entry do_extint(struct pt_regs *regs)
+static irqreturn_t do_ext_interrupt(int irq, void *dummy)
 {
+	struct pt_regs *regs = get_irq_regs();
 	struct ext_code ext_code;
-	struct pt_regs *old_regs;
 	struct ext_int_info *p;
 	int index;
 
-	old_regs = set_irq_regs(regs);
-	irq_enter();
-	if (S390_lowcore.int_clock >= S390_lowcore.clock_comparator) {
-		/* Serve timer interrupts first. */
-		clock_comparator_work();
-	}
-	kstat_incr_irqs_this_cpu(EXTERNAL_INTERRUPT, NULL);
 	ext_code = *(struct ext_code *) &regs->int_code;
 	if (ext_code.code != 0x1004)
 		__get_cpu_var(s390_idle).nohz_delay = 1;
 
 	index = ext_hash(ext_code.code);
 	rcu_read_lock();
-	list_for_each_entry_rcu(p, &ext_int_hash[index], entry)
-		if (likely(p->code == ext_code.code))
-			p->handler(ext_code, regs->int_parm,
-				   regs->int_parm_long);
+	hlist_for_each_entry_rcu(p, &ext_int_hash[index], entry) {
+		if (unlikely(p->code != ext_code.code))
+			continue;
+		p->handler(ext_code, regs->int_parm, regs->int_parm_long);
+	}
 	rcu_read_unlock();
-	irq_exit();
-	set_irq_regs(old_regs);
+	return IRQ_HANDLED;
 }
 
-void __init init_IRQ(void)
-{
-	init_external_interrupts();
-}
-
-static DEFINE_SPINLOCK(sc_irq_lock);
-static int sc_irq_refcount;
-
-void service_subclass_irq_register(void)
-{
-	spin_lock(&sc_irq_lock);
-	if (!sc_irq_refcount)
-		ctl_set_bit(0, 9);
-	sc_irq_refcount++;
-	spin_unlock(&sc_irq_lock);
-}
-EXPORT_SYMBOL(service_subclass_irq_register);
-
-void service_subclass_irq_unregister(void)
-{
-	spin_lock(&sc_irq_lock);
-	sc_irq_refcount--;
-	if (!sc_irq_refcount)
-		ctl_clear_bit(0, 9);
-	spin_unlock(&sc_irq_lock);
-}
-EXPORT_SYMBOL(service_subclass_irq_unregister);
-
-static DEFINE_SPINLOCK(ma_subclass_lock);
-static int ma_subclass_refcount;
-
-void measurement_alert_subclass_register(void)
-{
-	spin_lock(&ma_subclass_lock);
-	if (!ma_subclass_refcount)
-		ctl_set_bit(0, 5);
-	ma_subclass_refcount++;
-	spin_unlock(&ma_subclass_lock);
-}
-EXPORT_SYMBOL(measurement_alert_subclass_register);
-
-void measurement_alert_subclass_unregister(void)
-{
-	spin_lock(&ma_subclass_lock);
-	ma_subclass_refcount--;
-	if (!ma_subclass_refcount)
-		ctl_clear_bit(0, 5);
-	spin_unlock(&ma_subclass_lock);
-}
-EXPORT_SYMBOL(measurement_alert_subclass_unregister);
-
-#ifdef CONFIG_SMP
-void synchronize_irq(unsigned int irq)
-{
-	/*
-	 * Not needed, the handler is protected by a lock and IRQs that occur
-	 * after the handler is deleted are just NOPs.
-	 */
-}
-EXPORT_SYMBOL_GPL(synchronize_irq);
-#endif
-
-#ifndef CONFIG_PCI
-
-/* Only PCI devices have dynamically-defined IRQ handlers */
-
-int request_irq(unsigned int irq, irq_handler_t handler,
-		unsigned long irqflags, const char *devname, void *dev_id)
-{
-	return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(request_irq);
-
-void free_irq(unsigned int irq, void *dev_id)
-{
-	WARN_ON(1);
-}
-EXPORT_SYMBOL_GPL(free_irq);
-
-void enable_irq(unsigned int irq)
-{
-	WARN_ON(1);
-}
-EXPORT_SYMBOL_GPL(enable_irq);
+static struct irqaction external_interrupt = {
+	.name	 = "EXT",
+	.handler = do_ext_interrupt,
+};
 
-void disable_irq(unsigned int irq)
+void __init init_ext_interrupts(void)
 {
-	WARN_ON(1);
-}
-EXPORT_SYMBOL_GPL(disable_irq);
+	int idx;
 
-#endif /* !CONFIG_PCI */
+	for (idx = 0; idx < ARRAY_SIZE(ext_int_hash); idx++)
+		INIT_HLIST_HEAD(&ext_int_hash[idx]);
 
-void disable_irq_nosync(unsigned int irq)
-{
-	disable_irq(irq);
+	irq_set_chip_and_handler(EXT_INTERRUPT,
+				 &dummy_irq_chip, handle_percpu_irq);
+	setup_irq(EXT_INTERRUPT, &external_interrupt);
 }
-EXPORT_SYMBOL_GPL(disable_irq_nosync);
 
-unsigned long probe_irq_on(void)
-{
-	return 0;
-}
-EXPORT_SYMBOL_GPL(probe_irq_on);
+static DEFINE_SPINLOCK(irq_subclass_lock);
+static unsigned char irq_subclass_refcount[64];
 
-int probe_irq_off(unsigned long val)
+void irq_subclass_register(enum irq_subclass subclass)
 {
-	return 0;
+	spin_lock(&irq_subclass_lock);
+	if (!irq_subclass_refcount[subclass])
+		ctl_set_bit(0, subclass);
+	irq_subclass_refcount[subclass]++;
+	spin_unlock(&irq_subclass_lock);
 }
-EXPORT_SYMBOL_GPL(probe_irq_off);
+EXPORT_SYMBOL(irq_subclass_register);
 
-unsigned int probe_irq_mask(unsigned long val)
+void irq_subclass_unregister(enum irq_subclass subclass)
 {
-	return val;
+	spin_lock(&irq_subclass_lock);
+	irq_subclass_refcount[subclass]--;
+	if (!irq_subclass_refcount[subclass])
+		ctl_clear_bit(0, subclass);
+	spin_unlock(&irq_subclass_lock);
 }
-EXPORT_SYMBOL_GPL(probe_irq_mask);
+EXPORT_SYMBOL(irq_subclass_unregister);
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 3388b2b..59a9c35 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -26,19 +26,42 @@
 #include <linux/stop_machine.h>
 #include <linux/kdebug.h>
 #include <linux/uaccess.h>
-#include <asm/cacheflush.h>
-#include <asm/sections.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/hardirq.h>
+#include <asm/cacheflush.h>
+#include <asm/sections.h>
+#include <asm/dis.h>
 
 DEFINE_PER_CPU(struct kprobe *, current_kprobe);
 DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
 
 struct kretprobe_blackpoint kretprobe_blacklist[] = { };
 
+DEFINE_INSN_CACHE_OPS(dmainsn);
+
+static void *alloc_dmainsn_page(void)
+{
+	return (void *)__get_free_page(GFP_KERNEL | GFP_DMA);
+}
+
+static void free_dmainsn_page(void *page)
+{
+	free_page((unsigned long)page);
+}
+
+struct kprobe_insn_cache kprobe_dmainsn_slots = {
+	.mutex = __MUTEX_INITIALIZER(kprobe_dmainsn_slots.mutex),
+	.alloc = alloc_dmainsn_page,
+	.free = free_dmainsn_page,
+	.pages = LIST_HEAD_INIT(kprobe_dmainsn_slots.pages),
+	.insn_size = MAX_INSN_SIZE,
+};
+
 static int __kprobes is_prohibited_opcode(kprobe_opcode_t *insn)
 {
+	if (!is_known_insn((unsigned char *)insn))
+		return -EINVAL;
 	switch (insn[0] >> 8) {
 	case 0x0c:	/* bassm */
 	case 0x0b:	/* bsm	 */
@@ -47,6 +70,11 @@ static int __kprobes is_prohibited_opcode(kprobe_opcode_t *insn)
 	case 0xac:	/* stnsm */
 	case 0xad:	/* stosm */
 		return -EINVAL;
+	case 0xc6:
+		switch (insn[0] & 0x0f) {
+		case 0x00: /* exrl   */
+			return -EINVAL;
+		}
 	}
 	switch (insn[0]) {
 	case 0x0101:	/* pr	 */
@@ -100,35 +128,160 @@ static int __kprobes get_fixup_type(kprobe_opcode_t *insn)
 			fixup |= FIXUP_RETURN_REGISTER;
 		break;
 	case 0xc0:
-		if ((insn[0] & 0x0f) == 0x00 ||	/* larl  */
-		    (insn[0] & 0x0f) == 0x05)	/* brasl */
-		fixup |= FIXUP_RETURN_REGISTER;
+		if ((insn[0] & 0x0f) == 0x05)	/* brasl */
+			fixup |= FIXUP_RETURN_REGISTER;
 		break;
 	case 0xeb:
-		if ((insn[2] & 0xff) == 0x44 ||	/* bxhg  */
-		    (insn[2] & 0xff) == 0x45)	/* bxleg */
+		switch (insn[2] & 0xff) {
+		case 0x44: /* bxhg  */
+		case 0x45: /* bxleg */
 			fixup = FIXUP_BRANCH_NOT_TAKEN;
+			break;
+		}
 		break;
 	case 0xe3:	/* bctg	*/
 		if ((insn[2] & 0xff) == 0x46)
 			fixup = FIXUP_BRANCH_NOT_TAKEN;
 		break;
+	case 0xec:
+		switch (insn[2] & 0xff) {
+		case 0xe5: /* clgrb */
+		case 0xe6: /* cgrb  */
+		case 0xf6: /* crb   */
+		case 0xf7: /* clrb  */
+		case 0xfc: /* cgib  */
+		case 0xfd: /* cglib */
+		case 0xfe: /* cib   */
+		case 0xff: /* clib  */
+			fixup = FIXUP_BRANCH_NOT_TAKEN;
+			break;
+		}
+		break;
 	}
 	return fixup;
 }
 
+static int __kprobes is_insn_relative_long(kprobe_opcode_t *insn)
+{
+	/* Check if we have a RIL-b or RIL-c format instruction which
+	 * we need to modify in order to avoid instruction emulation. */
+	switch (insn[0] >> 8) {
+	case 0xc0:
+		if ((insn[0] & 0x0f) == 0x00) /* larl */
+			return true;
+		break;
+	case 0xc4:
+		switch (insn[0] & 0x0f) {
+		case 0x02: /* llhrl  */
+		case 0x04: /* lghrl  */
+		case 0x05: /* lhrl   */
+		case 0x06: /* llghrl */
+		case 0x07: /* sthrl  */
+		case 0x08: /* lgrl   */
+		case 0x0b: /* stgrl  */
+		case 0x0c: /* lgfrl  */
+		case 0x0d: /* lrl    */
+		case 0x0e: /* llgfrl */
+		case 0x0f: /* strl   */
+			return true;
+		}
+		break;
+	case 0xc6:
+		switch (insn[0] & 0x0f) {
+		case 0x02: /* pfdrl  */
+		case 0x04: /* cghrl  */
+		case 0x05: /* chrl   */
+		case 0x06: /* clghrl */
+		case 0x07: /* clhrl  */
+		case 0x08: /* cgrl   */
+		case 0x0a: /* clgrl  */
+		case 0x0c: /* cgfrl  */
+		case 0x0d: /* crl    */
+		case 0x0e: /* clgfrl */
+		case 0x0f: /* clrl   */
+			return true;
+		}
+		break;
+	}
+	return false;
+}
+
+static void __kprobes copy_instruction(struct kprobe *p)
+{
+	s64 disp, new_disp;
+	u64 addr, new_addr;
+
+	memcpy(p->ainsn.insn, p->addr, insn_length(p->opcode >> 8));
+	if (!is_insn_relative_long(p->ainsn.insn))
+		return;
+	/*
+	 * For pc-relative instructions in RIL-b or RIL-c format patch the
+	 * RI2 displacement field. We have already made sure that the insn
+	 * slot for the patched instruction is within the same 2GB area
+	 * as the original instruction (either kernel image or module area).
+	 * Therefore the new displacement will always fit.
+	 */
+	disp = *(s32 *)&p->ainsn.insn[1];
+	addr = (u64)(unsigned long)p->addr;
+	new_addr = (u64)(unsigned long)p->ainsn.insn;
+	new_disp = ((addr + (disp * 2)) - new_addr) / 2;
+	*(s32 *)&p->ainsn.insn[1] = new_disp;
+}
+
+static inline int is_kernel_addr(void *addr)
+{
+	return addr < (void *)_end;
+}
+
+static inline int is_module_addr(void *addr)
+{
+#ifdef CONFIG_64BIT
+	BUILD_BUG_ON(MODULES_LEN > (1UL << 31));
+	if (addr < (void *)MODULES_VADDR)
+		return 0;
+	if (addr > (void *)MODULES_END)
+		return 0;
+#endif
+	return 1;
+}
+
+static int __kprobes s390_get_insn_slot(struct kprobe *p)
+{
+	/*
+	 * Get an insn slot that is within the same 2GB area like the original
+	 * instruction. That way instructions with a 32bit signed displacement
+	 * field can be patched and executed within the insn slot.
+	 */
+	p->ainsn.insn = NULL;
+	if (is_kernel_addr(p->addr))
+		p->ainsn.insn = get_dmainsn_slot();
+	else if (is_module_addr(p->addr))
+		p->ainsn.insn = get_insn_slot();
+	return p->ainsn.insn ? 0 : -ENOMEM;
+}
+
+static void __kprobes s390_free_insn_slot(struct kprobe *p)
+{
+	if (!p->ainsn.insn)
+		return;
+	if (is_kernel_addr(p->addr))
+		free_dmainsn_slot(p->ainsn.insn, 0);
+	else
+		free_insn_slot(p->ainsn.insn, 0);
+	p->ainsn.insn = NULL;
+}
+
 int __kprobes arch_prepare_kprobe(struct kprobe *p)
 {
 	if ((unsigned long) p->addr & 0x01)
 		return -EINVAL;
-
 	/* Make sure the probe isn't going on a difficult instruction */
 	if (is_prohibited_opcode(p->addr))
 		return -EINVAL;
-
+	if (s390_get_insn_slot(p))
+		return -ENOMEM;
 	p->opcode = *p->addr;
-	memcpy(p->ainsn.insn, p->addr, ((p->opcode >> 14) + 3) & -2);
-
+	copy_instruction(p);
 	return 0;
 }
 
@@ -169,6 +322,7 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p)
 
 void __kprobes arch_remove_kprobe(struct kprobe *p)
 {
+	s390_free_insn_slot(p);
 }
 
 static void __kprobes enable_singlestep(struct kprobe_ctlblk *kcb,
@@ -457,7 +611,7 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
 		ip += (unsigned long) p->addr - (unsigned long) p->ainsn.insn;
 
 	if (fixup & FIXUP_BRANCH_NOT_TAKEN) {
-		int ilen = ((p->ainsn.insn[0] >> 14) + 3) & -2;
+		int ilen = insn_length(p->ainsn.insn[0] >> 8);
 		if (ip - (unsigned long) p->ainsn.insn == ilen)
 			ip = (unsigned long) p->addr + ilen;
 	}
diff --git a/arch/s390/kernel/machine_kexec.c b/arch/s390/kernel/machine_kexec.c
index ac21781..719e27b 100644
--- a/arch/s390/kernel/machine_kexec.c
+++ b/arch/s390/kernel/machine_kexec.c
@@ -50,7 +50,7 @@ static void add_elf_notes(int cpu)
 /*
  * Initialize CPU ELF notes
  */
-void setup_regs(void)
+static void setup_regs(void)
 {
 	unsigned long sa = S390_lowcore.prefixreg_save_area + SAVE_AREA_BASE;
 	int cpu, this_cpu;
diff --git a/arch/s390/kernel/nmi.c b/arch/s390/kernel/nmi.c
index 504175e..c4c0338 100644
--- a/arch/s390/kernel/nmi.c
+++ b/arch/s390/kernel/nmi.c
@@ -214,10 +214,7 @@ static int notrace s390_revalidate_registers(struct mci *mci)
 			: "0", "cc");
 #endif
 	/* Revalidate clock comparator register */
-	if (S390_lowcore.clock_comparator == -1)
-		set_clock_comparator(S390_lowcore.mcck_clock);
-	else
-		set_clock_comparator(S390_lowcore.clock_comparator);
+	set_clock_comparator(S390_lowcore.clock_comparator);
 	/* Check if old PSW is valid */
 	if (!mci->wp)
 		/*
diff --git a/arch/s390/kernel/perf_cpum_cf.c b/arch/s390/kernel/perf_cpum_cf.c
index fb99c20..1105502 100644
--- a/arch/s390/kernel/perf_cpum_cf.c
+++ b/arch/s390/kernel/perf_cpum_cf.c
@@ -274,7 +274,7 @@ static int reserve_pmc_hardware(void)
 	int flags = PMC_INIT;
 
 	on_each_cpu(setup_pmc_cpu, &flags, 1);
-	measurement_alert_subclass_register();
+	irq_subclass_register(IRQ_SUBCLASS_MEASUREMENT_ALERT);
 
 	return 0;
 }
@@ -285,7 +285,7 @@ static void release_pmc_hardware(void)
 	int flags = PMC_RELEASE;
 
 	on_each_cpu(setup_pmc_cpu, &flags, 1);
-	measurement_alert_subclass_unregister();
+	irq_subclass_unregister(IRQ_SUBCLASS_MEASUREMENT_ALERT);
 }
 
 /* Release the PMU if event is the last perf event */
diff --git a/arch/s390/kernel/perf_event.c b/arch/s390/kernel/perf_event.c
index 500aa10..2343c21 100644
--- a/arch/s390/kernel/perf_event.c
+++ b/arch/s390/kernel/perf_event.c
@@ -105,13 +105,10 @@ void perf_event_print_debug(void)
 
 	cpu = smp_processor_id();
 	memset(&cf_info, 0, sizeof(cf_info));
-	if (!qctri(&cf_info)) {
+	if (!qctri(&cf_info))
 		pr_info("CPU[%i] CPUM_CF: ver=%u.%u A=%04x E=%04x C=%04x\n",
 			cpu, cf_info.cfvn, cf_info.csvn,
 			cf_info.auth_ctl, cf_info.enable_ctl, cf_info.act_ctl);
-		print_hex_dump_bytes("CPUMF Query: ", DUMP_PREFIX_OFFSET,
-				     &cf_info, sizeof(cf_info));
-	}
 
 	local_irq_restore(flags);
 }
diff --git a/arch/s390/kernel/pgm_check.S b/arch/s390/kernel/pgm_check.S
index 14bdecb..4a460c4 100644
--- a/arch/s390/kernel/pgm_check.S
+++ b/arch/s390/kernel/pgm_check.S
@@ -78,7 +78,7 @@ PGM_CHECK_DEFAULT			/* 34 */
 PGM_CHECK_DEFAULT			/* 35 */
 PGM_CHECK_DEFAULT			/* 36 */
 PGM_CHECK_DEFAULT			/* 37 */
-PGM_CHECK_64BIT(do_asce_exception)	/* 38 */
+PGM_CHECK_DEFAULT			/* 38 */
 PGM_CHECK_64BIT(do_dat_exception)	/* 39 */
 PGM_CHECK_64BIT(do_dat_exception)	/* 3a */
 PGM_CHECK_64BIT(do_dat_exception)	/* 3b */
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 2bc3edd..7ed0d4e 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -71,6 +71,7 @@ void arch_cpu_idle(void)
 	}
 	/* Halt the cpu and keep track of cpu time accounting. */
 	vtime_stop_cpu();
+	local_irq_enable();
 }
 
 void arch_cpu_idle_exit(void)
@@ -138,7 +139,7 @@ int copy_thread(unsigned long clone_flags, unsigned long new_stackp,
 	if (unlikely(p->flags & PF_KTHREAD)) {
 		/* kernel thread */
 		memset(&frame->childregs, 0, sizeof(struct pt_regs));
-		frame->childregs.psw.mask = psw_kernel_bits | PSW_MASK_DAT |
+		frame->childregs.psw.mask = PSW_KERNEL_BITS | PSW_MASK_DAT |
 				PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK;
 		frame->childregs.psw.addr = PSW_ADDR_AMODE |
 				(unsigned long) kernel_thread_starter;
@@ -164,7 +165,8 @@ int copy_thread(unsigned long clone_flags, unsigned long new_stackp,
 	 * save fprs to current->thread.fp_regs to merge them with
 	 * the emulated registers and then copy the result to the child.
 	 */
-	save_fp_regs(&current->thread.fp_regs);
+	save_fp_ctl(&current->thread.fp_regs.fpc);
+	save_fp_regs(current->thread.fp_regs.fprs);
 	memcpy(&p->thread.fp_regs, &current->thread.fp_regs,
 	       sizeof(s390_fp_regs));
 	/* Set a new TLS ?  */
@@ -172,7 +174,9 @@ int copy_thread(unsigned long clone_flags, unsigned long new_stackp,
 		p->thread.acrs[0] = frame->childregs.gprs[6];
 #else /* CONFIG_64BIT */
 	/* Save the fpu registers to new thread structure. */
-	save_fp_regs(&p->thread.fp_regs);
+	save_fp_ctl(&p->thread.fp_regs.fpc);
+	save_fp_regs(p->thread.fp_regs.fprs);
+	p->thread.fp_regs.pad = 0;
 	/* Set a new TLS ?  */
 	if (clone_flags & CLONE_SETTLS) {
 		unsigned long tls = frame->childregs.gprs[6];
@@ -204,10 +208,12 @@ int dump_fpu (struct pt_regs * regs, s390_fp_regs *fpregs)
 	 * save fprs to current->thread.fp_regs to merge them with
 	 * the emulated registers and then copy the result to the dump.
 	 */
-	save_fp_regs(&current->thread.fp_regs);
+	save_fp_ctl(&current->thread.fp_regs.fpc);
+	save_fp_regs(current->thread.fp_regs.fprs);
 	memcpy(fpregs, &current->thread.fp_regs, sizeof(s390_fp_regs));
 #else /* CONFIG_64BIT */
-	save_fp_regs(fpregs);
+	save_fp_ctl(&fpregs->fpc);
+	save_fp_regs(fpregs->fprs);
 #endif /* CONFIG_64BIT */
 	return 1;
 }
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index e9fadb0..e65c91c 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -60,11 +60,11 @@ void update_cr_regs(struct task_struct *task)
 
 		__ctl_store(cr, 0, 2);
 		cr_new[1] = cr[1];
-		/* Set or clear transaction execution TXC/PIFO bits 8 and 9. */
+		/* Set or clear transaction execution TXC bit 8. */
 		if (task->thread.per_flags & PER_FLAG_NO_TE)
-			cr_new[0] = cr[0] & ~(3UL << 54);
+			cr_new[0] = cr[0] & ~(1UL << 55);
 		else
-			cr_new[0] = cr[0] | (3UL << 54);
+			cr_new[0] = cr[0] | (1UL << 55);
 		/* Set or clear transaction execution TDC bits 62 and 63. */
 		cr_new[2] = cr[2] & ~3UL;
 		if (task->thread.per_flags & PER_FLAG_TE_ABORT_RAND) {
@@ -198,9 +198,11 @@ static unsigned long __peek_user(struct task_struct *child, addr_t addr)
 		 * psw and gprs are stored on the stack
 		 */
 		tmp = *(addr_t *)((addr_t) &task_pt_regs(child)->psw + addr);
-		if (addr == (addr_t) &dummy->regs.psw.mask)
+		if (addr == (addr_t) &dummy->regs.psw.mask) {
 			/* Return a clean psw mask. */
-			tmp = psw_user_bits | (tmp & PSW_MASK_USER);
+			tmp &= PSW_MASK_USER | PSW_MASK_RI;
+			tmp |= PSW_USER_BITS;
+		}
 
 	} else if (addr < (addr_t) &dummy->regs.orig_gpr2) {
 		/*
@@ -239,8 +241,7 @@ static unsigned long __peek_user(struct task_struct *child, addr_t addr)
 		offset = addr - (addr_t) &dummy->regs.fp_regs;
 		tmp = *(addr_t *)((addr_t) &child->thread.fp_regs + offset);
 		if (addr == (addr_t) &dummy->regs.fp_regs.fpc)
-			tmp &= (unsigned long) FPC_VALID_MASK
-				<< (BITS_PER_LONG - 32);
+			tmp <<= BITS_PER_LONG - 32;
 
 	} else if (addr < (addr_t) (&dummy->regs.per_info + 1)) {
 		/*
@@ -321,11 +322,15 @@ static int __poke_user(struct task_struct *child, addr_t addr, addr_t data)
 		/*
 		 * psw and gprs are stored on the stack
 		 */
-		if (addr == (addr_t) &dummy->regs.psw.mask &&
-		    ((data & ~PSW_MASK_USER) != psw_user_bits ||
-		     ((data & PSW_MASK_EA) && !(data & PSW_MASK_BA))))
-			/* Invalid psw mask. */
-			return -EINVAL;
+		if (addr == (addr_t) &dummy->regs.psw.mask) {
+			unsigned long mask = PSW_MASK_USER;
+
+			mask |= is_ri_task(child) ? PSW_MASK_RI : 0;
+			if ((data & ~mask) != PSW_USER_BITS)
+				return -EINVAL;
+			if ((data & PSW_MASK_EA) && !(data & PSW_MASK_BA))
+				return -EINVAL;
+		}
 		*(addr_t *)((addr_t) &task_pt_regs(child)->psw + addr) = data;
 
 	} else if (addr < (addr_t) (&dummy->regs.orig_gpr2)) {
@@ -363,10 +368,10 @@ static int __poke_user(struct task_struct *child, addr_t addr, addr_t data)
 		/*
 		 * floating point regs. are stored in the thread structure
 		 */
-		if (addr == (addr_t) &dummy->regs.fp_regs.fpc &&
-		    (data & ~((unsigned long) FPC_VALID_MASK
-			      << (BITS_PER_LONG - 32))) != 0)
-			return -EINVAL;
+		if (addr == (addr_t) &dummy->regs.fp_regs.fpc)
+			if ((unsigned int) data != 0 ||
+			    test_fp_ctl(data >> (BITS_PER_LONG - 32)))
+				return -EINVAL;
 		offset = addr - (addr_t) &dummy->regs.fp_regs;
 		*(addr_t *)((addr_t) &child->thread.fp_regs + offset) = data;
 
@@ -557,7 +562,8 @@ static u32 __peek_user_compat(struct task_struct *child, addr_t addr)
 		if (addr == (addr_t) &dummy32->regs.psw.mask) {
 			/* Fake a 31 bit psw mask. */
 			tmp = (__u32)(regs->psw.mask >> 32);
-			tmp = psw32_user_bits | (tmp & PSW32_MASK_USER);
+			tmp &= PSW32_MASK_USER | PSW32_MASK_RI;
+			tmp |= PSW32_USER_BITS;
 		} else if (addr == (addr_t) &dummy32->regs.psw.addr) {
 			/* Fake a 31 bit psw address. */
 			tmp = (__u32) regs->psw.addr |
@@ -654,13 +660,16 @@ static int __poke_user_compat(struct task_struct *child,
 		 * psw, gprs, acrs and orig_gpr2 are stored on the stack
 		 */
 		if (addr == (addr_t) &dummy32->regs.psw.mask) {
+			__u32 mask = PSW32_MASK_USER;
+
+			mask |= is_ri_task(child) ? PSW32_MASK_RI : 0;
 			/* Build a 64 bit psw mask from 31 bit mask. */
-			if ((tmp & ~PSW32_MASK_USER) != psw32_user_bits)
+			if ((tmp & ~mask) != PSW32_USER_BITS)
 				/* Invalid psw mask. */
 				return -EINVAL;
 			regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) |
 				(regs->psw.mask & PSW_MASK_BA) |
-				(__u64)(tmp & PSW32_MASK_USER) << 32;
+				(__u64)(tmp & mask) << 32;
 		} else if (addr == (addr_t) &dummy32->regs.psw.addr) {
 			/* Build a 64 bit psw address from 31 bit address. */
 			regs->psw.addr = (__u64) tmp & PSW32_ADDR_INSN;
@@ -696,8 +705,7 @@ static int __poke_user_compat(struct task_struct *child,
 		 * floating point regs. are stored in the thread structure 
 		 */
 		if (addr == (addr_t) &dummy32->regs.fp_regs.fpc &&
-		    (tmp & ~FPC_VALID_MASK) != 0)
-			/* Invalid floating point control. */
+		    test_fp_ctl(tmp))
 			return -EINVAL;
 	        offset = addr - (addr_t) &dummy32->regs.fp_regs;
 		*(__u32 *)((addr_t) &child->thread.fp_regs + offset) = tmp;
@@ -895,8 +903,10 @@ static int s390_fpregs_get(struct task_struct *target,
 			   const struct user_regset *regset, unsigned int pos,
 			   unsigned int count, void *kbuf, void __user *ubuf)
 {
-	if (target == current)
-		save_fp_regs(&target->thread.fp_regs);
+	if (target == current) {
+		save_fp_ctl(&target->thread.fp_regs.fpc);
+		save_fp_regs(target->thread.fp_regs.fprs);
+	}
 
 	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				   &target->thread.fp_regs, 0, -1);
@@ -909,19 +919,21 @@ static int s390_fpregs_set(struct task_struct *target,
 {
 	int rc = 0;
 
-	if (target == current)
-		save_fp_regs(&target->thread.fp_regs);
+	if (target == current) {
+		save_fp_ctl(&target->thread.fp_regs.fpc);
+		save_fp_regs(target->thread.fp_regs.fprs);
+	}
 
 	/* If setting FPC, must validate it first. */
 	if (count > 0 && pos < offsetof(s390_fp_regs, fprs)) {
-		u32 fpc[2] = { target->thread.fp_regs.fpc, 0 };
-		rc = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &fpc,
+		u32 ufpc[2] = { target->thread.fp_regs.fpc, 0 };
+		rc = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &ufpc,
 					0, offsetof(s390_fp_regs, fprs));
 		if (rc)
 			return rc;
-		if ((fpc[0] & ~FPC_VALID_MASK) != 0 || fpc[1] != 0)
+		if (ufpc[1] != 0 || test_fp_ctl(ufpc[0]))
 			return -EINVAL;
-		target->thread.fp_regs.fpc = fpc[0];
+		target->thread.fp_regs.fpc = ufpc[0];
 	}
 
 	if (rc == 0 && count > 0)
@@ -929,8 +941,10 @@ static int s390_fpregs_set(struct task_struct *target,
 					target->thread.fp_regs.fprs,
 					offsetof(s390_fp_regs, fprs), -1);
 
-	if (rc == 0 && target == current)
-		restore_fp_regs(&target->thread.fp_regs);
+	if (rc == 0 && target == current) {
+		restore_fp_ctl(&target->thread.fp_regs.fpc);
+		restore_fp_regs(target->thread.fp_regs.fprs);
+	}
 
 	return rc;
 }
@@ -1299,7 +1313,7 @@ int regs_query_register_offset(const char *name)
 
 	if (!name || *name != 'r')
 		return -EINVAL;
-	if (strict_strtoul(name + 1, 10, &offset))
+	if (kstrtoul(name + 1, 10, &offset))
 		return -EINVAL;
 	if (offset >= NUM_GPRS)
 		return -EINVAL;
diff --git a/arch/s390/kernel/runtime_instr.c b/arch/s390/kernel/runtime_instr.c
index 077a993..d817cce 100644
--- a/arch/s390/kernel/runtime_instr.c
+++ b/arch/s390/kernel/runtime_instr.c
@@ -40,8 +40,6 @@ static void disable_runtime_instr(void)
 static void init_runtime_instr_cb(struct runtime_instr_cb *cb)
 {
 	cb->buf_limit = 0xfff;
-	if (s390_user_mode == HOME_SPACE_MODE)
-		cb->home_space = 1;
 	cb->int_requested = 1;
 	cb->pstate = 1;
 	cb->pstate_set_buf = 1;
@@ -139,10 +137,10 @@ static int __init runtime_instr_init(void)
 	if (!runtime_instr_avail())
 		return 0;
 
-	measurement_alert_subclass_register();
+	irq_subclass_register(IRQ_SUBCLASS_MEASUREMENT_ALERT);
 	rc = register_external_interrupt(0x1407, runtime_instr_int_handler);
 	if (rc)
-		measurement_alert_subclass_unregister();
+		irq_subclass_unregister(IRQ_SUBCLASS_MEASUREMENT_ALERT);
 	else
 		pr_info("Runtime instrumentation facility initialized\n");
 	return rc;
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index aeed8a6..ffe1c53 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -64,12 +64,6 @@
 #include <asm/sclp.h>
 #include "entry.h"
 
-long psw_kernel_bits	= PSW_DEFAULT_KEY | PSW_MASK_BASE | PSW_ASC_PRIMARY |
-			  PSW_MASK_EA | PSW_MASK_BA;
-long psw_user_bits	= PSW_MASK_DAT | PSW_MASK_IO | PSW_MASK_EXT |
-			  PSW_DEFAULT_KEY | PSW_MASK_BASE | PSW_MASK_MCHECK |
-			  PSW_MASK_PSTATE | PSW_ASC_HOME;
-
 /*
  * User copy operations.
  */
@@ -300,43 +294,14 @@ static int __init parse_vmalloc(char *arg)
 }
 early_param("vmalloc", parse_vmalloc);
 
-unsigned int s390_user_mode = PRIMARY_SPACE_MODE;
-EXPORT_SYMBOL_GPL(s390_user_mode);
-
-static void __init set_user_mode_primary(void)
-{
-	psw_kernel_bits = (psw_kernel_bits & ~PSW_MASK_ASC) | PSW_ASC_HOME;
-	psw_user_bits = (psw_user_bits & ~PSW_MASK_ASC) | PSW_ASC_PRIMARY;
-#ifdef CONFIG_COMPAT
-	psw32_user_bits =
-		(psw32_user_bits & ~PSW32_MASK_ASC) | PSW32_ASC_PRIMARY;
-#endif
-	uaccess = MACHINE_HAS_MVCOS ? uaccess_mvcos_switch : uaccess_pt;
-}
-
 static int __init early_parse_user_mode(char *p)
 {
-	if (p && strcmp(p, "primary") == 0)
-		s390_user_mode = PRIMARY_SPACE_MODE;
-	else if (!p || strcmp(p, "home") == 0)
-		s390_user_mode = HOME_SPACE_MODE;
-	else
-		return 1;
-	return 0;
+	if (!p || strcmp(p, "primary") == 0)
+		return 0;
+	return 1;
 }
 early_param("user_mode", early_parse_user_mode);
 
-static void __init setup_addressing_mode(void)
-{
-	if (s390_user_mode != PRIMARY_SPACE_MODE)
-		return;
-	set_user_mode_primary();
-	if (MACHINE_HAS_MVCOS)
-		pr_info("Address spaces switched, mvcos available\n");
-	else
-		pr_info("Address spaces switched, mvcos not available\n");
-}
-
 void *restart_stack __attribute__((__section__(".data")));
 
 static void __init setup_lowcore(void)
@@ -348,24 +313,24 @@ static void __init setup_lowcore(void)
 	 */
 	BUILD_BUG_ON(sizeof(struct _lowcore) != LC_PAGES * 4096);
 	lc = __alloc_bootmem_low(LC_PAGES * PAGE_SIZE, LC_PAGES * PAGE_SIZE, 0);
-	lc->restart_psw.mask = psw_kernel_bits;
+	lc->restart_psw.mask = PSW_KERNEL_BITS;
 	lc->restart_psw.addr =
 		PSW_ADDR_AMODE | (unsigned long) restart_int_handler;
-	lc->external_new_psw.mask = psw_kernel_bits |
+	lc->external_new_psw.mask = PSW_KERNEL_BITS |
 		PSW_MASK_DAT | PSW_MASK_MCHECK;
 	lc->external_new_psw.addr =
 		PSW_ADDR_AMODE | (unsigned long) ext_int_handler;
-	lc->svc_new_psw.mask = psw_kernel_bits |
+	lc->svc_new_psw.mask = PSW_KERNEL_BITS |
 		PSW_MASK_DAT | PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK;
 	lc->svc_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) system_call;
-	lc->program_new_psw.mask = psw_kernel_bits |
+	lc->program_new_psw.mask = PSW_KERNEL_BITS |
 		PSW_MASK_DAT | PSW_MASK_MCHECK;
 	lc->program_new_psw.addr =
 		PSW_ADDR_AMODE | (unsigned long) pgm_check_handler;
-	lc->mcck_new_psw.mask = psw_kernel_bits;
+	lc->mcck_new_psw.mask = PSW_KERNEL_BITS;
 	lc->mcck_new_psw.addr =
 		PSW_ADDR_AMODE | (unsigned long) mcck_int_handler;
-	lc->io_new_psw.mask = psw_kernel_bits |
+	lc->io_new_psw.mask = PSW_KERNEL_BITS |
 		PSW_MASK_DAT | PSW_MASK_MCHECK;
 	lc->io_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) io_int_handler;
 	lc->clock_comparator = -1ULL;
@@ -1043,10 +1008,7 @@ void __init setup_arch(char **cmdline_p)
 	init_mm.end_data = (unsigned long) &_edata;
 	init_mm.brk = (unsigned long) &_end;
 
-	if (MACHINE_HAS_MVCOS)
-		memcpy(&uaccess, &uaccess_mvcos, sizeof(uaccess));
-	else
-		memcpy(&uaccess, &uaccess_std, sizeof(uaccess));
+	uaccess = MACHINE_HAS_MVCOS ? uaccess_mvcos : uaccess_pt;
 
 	parse_early_param();
 	detect_memory_layout(memory_chunk, memory_end);
@@ -1054,7 +1016,6 @@ void __init setup_arch(char **cmdline_p)
 	setup_ipl();
 	reserve_oldmem();
 	setup_memory_end();
-	setup_addressing_mode();
 	reserve_crashkernel();
 	setup_memory();
 	setup_resources();
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index c45becf..fb53587 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -57,40 +57,48 @@ static int save_sigregs(struct pt_regs *regs, _sigregs __user *sregs)
 
 	/* Copy a 'clean' PSW mask to the user to avoid leaking
 	   information about whether PER is currently on.  */
-	user_sregs.regs.psw.mask = psw_user_bits |
-		(regs->psw.mask & PSW_MASK_USER);
+	user_sregs.regs.psw.mask = PSW_USER_BITS |
+		(regs->psw.mask & (PSW_MASK_USER | PSW_MASK_RI));
 	user_sregs.regs.psw.addr = regs->psw.addr;
 	memcpy(&user_sregs.regs.gprs, &regs->gprs, sizeof(sregs->regs.gprs));
 	memcpy(&user_sregs.regs.acrs, current->thread.acrs,
-	       sizeof(sregs->regs.acrs));
+	       sizeof(user_sregs.regs.acrs));
 	/* 
 	 * We have to store the fp registers to current->thread.fp_regs
 	 * to merge them with the emulated registers.
 	 */
-	save_fp_regs(&current->thread.fp_regs);
+	save_fp_ctl(&current->thread.fp_regs.fpc);
+	save_fp_regs(current->thread.fp_regs.fprs);
 	memcpy(&user_sregs.fpregs, &current->thread.fp_regs,
-	       sizeof(s390_fp_regs));
-	return __copy_to_user(sregs, &user_sregs, sizeof(_sigregs));
+	       sizeof(user_sregs.fpregs));
+	if (__copy_to_user(sregs, &user_sregs, sizeof(_sigregs)))
+		return -EFAULT;
+	return 0;
 }
 
-/* Returns positive number on error */
 static int restore_sigregs(struct pt_regs *regs, _sigregs __user *sregs)
 {
-	int err;
 	_sigregs user_sregs;
 
 	/* Alwys make any pending restarted system call return -EINTR */
 	current_thread_info()->restart_block.fn = do_no_restart_syscall;
 
-	err = __copy_from_user(&user_sregs, sregs, sizeof(_sigregs));
-	if (err)
-		return err;
-	/* Use regs->psw.mask instead of psw_user_bits to preserve PER bit. */
+	if (__copy_from_user(&user_sregs, sregs, sizeof(user_sregs)))
+		return -EFAULT;
+
+	if (!is_ri_task(current) && (user_sregs.regs.psw.mask & PSW_MASK_RI))
+		return -EINVAL;
+
+	/* Loading the floating-point-control word can fail. Do that first. */
+	if (restore_fp_ctl(&user_sregs.fpregs.fpc))
+		return -EINVAL;
+
+	/* Use regs->psw.mask instead of PSW_USER_BITS to preserve PER bit. */
 	regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) |
-		(user_sregs.regs.psw.mask & PSW_MASK_USER);
+		(user_sregs.regs.psw.mask & (PSW_MASK_USER | PSW_MASK_RI));
 	/* Check for invalid user address space control. */
-	if ((regs->psw.mask & PSW_MASK_ASC) >= (psw_kernel_bits & PSW_MASK_ASC))
-		regs->psw.mask = (psw_user_bits & PSW_MASK_ASC) |
+	if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_HOME)
+		regs->psw.mask = PSW_ASC_PRIMARY |
 			(regs->psw.mask & ~PSW_MASK_ASC);
 	/* Check for invalid amode */
 	if (regs->psw.mask & PSW_MASK_EA)
@@ -98,14 +106,13 @@ static int restore_sigregs(struct pt_regs *regs, _sigregs __user *sregs)
 	regs->psw.addr = user_sregs.regs.psw.addr;
 	memcpy(&regs->gprs, &user_sregs.regs.gprs, sizeof(sregs->regs.gprs));
 	memcpy(&current->thread.acrs, &user_sregs.regs.acrs,
-	       sizeof(sregs->regs.acrs));
+	       sizeof(current->thread.acrs));
 	restore_access_regs(current->thread.acrs);
 
 	memcpy(&current->thread.fp_regs, &user_sregs.fpregs,
-	       sizeof(s390_fp_regs));
-	current->thread.fp_regs.fpc &= FPC_VALID_MASK;
+	       sizeof(current->thread.fp_regs));
 
-	restore_fp_regs(&current->thread.fp_regs);
+	restore_fp_regs(current->thread.fp_regs.fprs);
 	clear_thread_flag(TIF_SYSCALL);	/* No longer in a system call */
 	return 0;
 }
@@ -224,7 +231,7 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 	regs->gprs[15] = (unsigned long) frame;
 	/* Force default amode and default user address space control. */
 	regs->psw.mask = PSW_MASK_EA | PSW_MASK_BA |
-		(psw_user_bits & PSW_MASK_ASC) |
+		(PSW_USER_BITS & PSW_MASK_ASC) |
 		(regs->psw.mask & ~PSW_MASK_ASC);
 	regs->psw.addr = (unsigned long) ka->sa.sa_handler | PSW_ADDR_AMODE;
 
@@ -295,7 +302,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	regs->gprs[15] = (unsigned long) frame;
 	/* Force default amode and default user address space control. */
 	regs->psw.mask = PSW_MASK_EA | PSW_MASK_BA |
-		(psw_user_bits & PSW_MASK_ASC) |
+		(PSW_USER_BITS & PSW_MASK_ASC) |
 		(regs->psw.mask & ~PSW_MASK_ASC);
 	regs->psw.addr = (unsigned long) ka->sa.sa_handler | PSW_ADDR_AMODE;
 
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index d386c4e..dc4a534 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -283,7 +283,7 @@ static void pcpu_delegate(struct pcpu *pcpu, void (*func)(void *),
 	struct _lowcore *lc = lowcore_ptr[pcpu - pcpu_devices];
 	unsigned long source_cpu = stap();
 
-	__load_psw_mask(psw_kernel_bits);
+	__load_psw_mask(PSW_KERNEL_BITS);
 	if (pcpu->address == source_cpu)
 		func(data);	/* should not return */
 	/* Stop target cpu (if func returns this stops the current cpu). */
@@ -362,7 +362,7 @@ void smp_yield_cpu(int cpu)
  * Send cpus emergency shutdown signal. This gives the cpus the
  * opportunity to complete outstanding interrupts.
  */
-void smp_emergency_stop(cpumask_t *cpumask)
+static void smp_emergency_stop(cpumask_t *cpumask)
 {
 	u64 end;
 	int cpu;
@@ -395,7 +395,7 @@ void smp_send_stop(void)
 	int cpu;
 
 	/* Disable all interrupts/machine checks */
-	__load_psw_mask(psw_kernel_bits | PSW_MASK_DAT);
+	__load_psw_mask(PSW_KERNEL_BITS | PSW_MASK_DAT);
 	trace_hardirqs_off();
 
 	debug_set_critical();
@@ -533,9 +533,6 @@ EXPORT_SYMBOL(smp_ctl_clear_bit);
 
 #if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_CRASH_DUMP)
 
-struct save_area *zfcpdump_save_areas[NR_CPUS + 1];
-EXPORT_SYMBOL_GPL(zfcpdump_save_areas);
-
 static void __init smp_get_save_area(int cpu, u16 address)
 {
 	void *lc = pcpu_devices[0].lowcore;
@@ -546,15 +543,9 @@ static void __init smp_get_save_area(int cpu, u16 address)
 	if (!OLDMEM_BASE && (address == boot_cpu_address ||
 			     ipl_info.type != IPL_TYPE_FCP_DUMP))
 		return;
-	if (cpu >= NR_CPUS) {
-		pr_warning("CPU %i exceeds the maximum %i and is excluded "
-			   "from the dump\n", cpu, NR_CPUS - 1);
-		return;
-	}
-	save_area = kmalloc(sizeof(struct save_area), GFP_KERNEL);
+	save_area = dump_save_area_create(cpu);
 	if (!save_area)
 		panic("could not allocate memory for save area\n");
-	zfcpdump_save_areas[cpu] = save_area;
 #ifdef CONFIG_CRASH_DUMP
 	if (address == boot_cpu_address) {
 		/* Copy the registers of the boot cpu. */
@@ -693,7 +684,7 @@ static void smp_start_secondary(void *cpuvoid)
 	S390_lowcore.restart_source = -1UL;
 	restore_access_regs(S390_lowcore.access_regs_save_area);
 	__ctl_load(S390_lowcore.cregs_save_area, 0, 15);
-	__load_psw_mask(psw_kernel_bits | PSW_MASK_DAT);
+	__load_psw_mask(PSW_KERNEL_BITS | PSW_MASK_DAT);
 	cpu_init();
 	preempt_disable();
 	init_cpu_timer();
@@ -929,7 +920,7 @@ static ssize_t show_idle_count(struct device *dev,
 		idle_count = ACCESS_ONCE(idle->idle_count);
 		if (ACCESS_ONCE(idle->clock_idle_enter))
 			idle_count++;
-	} while ((sequence & 1) || (idle->sequence != sequence));
+	} while ((sequence & 1) || (ACCESS_ONCE(idle->sequence) != sequence));
 	return sprintf(buf, "%llu\n", idle_count);
 }
 static DEVICE_ATTR(idle_count, 0444, show_idle_count, NULL);
@@ -947,7 +938,7 @@ static ssize_t show_idle_time(struct device *dev,
 		idle_time = ACCESS_ONCE(idle->idle_time);
 		idle_enter = ACCESS_ONCE(idle->clock_idle_enter);
 		idle_exit = ACCESS_ONCE(idle->clock_idle_exit);
-	} while ((sequence & 1) || (idle->sequence != sequence));
+	} while ((sequence & 1) || (ACCESS_ONCE(idle->sequence) != sequence));
 	idle_time += idle_enter ? ((idle_exit ? : now) - idle_enter) : 0;
 	return sprintf(buf, "%llu\n", idle_time >> 12);
 }
diff --git a/arch/s390/kernel/suspend.c b/arch/s390/kernel/suspend.c
index c479d2f..a7a7537 100644
--- a/arch/s390/kernel/suspend.c
+++ b/arch/s390/kernel/suspend.c
@@ -10,6 +10,10 @@
 #include <linux/suspend.h>
 #include <linux/mm.h>
 #include <asm/ctl_reg.h>
+#include <asm/ipl.h>
+#include <asm/cio.h>
+#include <asm/pci.h>
+#include "entry.h"
 
 /*
  * References to section boundaries
@@ -211,3 +215,11 @@ void restore_processor_state(void)
 	__ctl_set_bit(0,28);
 	local_mcck_enable();
 }
+
+/* Called at the end of swsusp_arch_resume */
+void s390_early_resume(void)
+{
+	lgr_info_log();
+	channel_subsystem_reinit();
+	zpci_rescan();
+}
diff --git a/arch/s390/kernel/swsusp_asm64.S b/arch/s390/kernel/swsusp_asm64.S
index c487be4..6b09fdf 100644
--- a/arch/s390/kernel/swsusp_asm64.S
+++ b/arch/s390/kernel/swsusp_asm64.S
@@ -281,11 +281,8 @@ restore_registers:
 	lghi	%r2,0
 	brasl	%r14,arch_set_page_states
 
-	/* Log potential guest relocation */
-	brasl	%r14,lgr_info_log
-
-	/* Reinitialize the channel subsystem */
-	brasl	%r14,channel_subsystem_reinit
+	/* Call arch specific early resume code */
+	brasl	%r14,s390_early_resume
 
 	/* Return 0 */
 	lmg	%r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 876546b..064c308 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -92,7 +92,6 @@ void clock_comparator_work(void)
 	struct clock_event_device *cd;
 
 	S390_lowcore.clock_comparator = -1ULL;
-	set_clock_comparator(S390_lowcore.clock_comparator);
 	cd = &__get_cpu_var(comparators);
 	cd->event_handler(cd);
 }
diff --git a/arch/s390/kernel/vdso.c b/arch/s390/kernel/vdso.c
index d777628..a84476f 100644
--- a/arch/s390/kernel/vdso.c
+++ b/arch/s390/kernel/vdso.c
@@ -63,7 +63,7 @@ static int __init vdso_setup(char *s)
 	else if (strncmp(s, "off", 4) == 0)
 		vdso_enabled = 0;
 	else {
-		rc = strict_strtoul(s, 0, &val);
+		rc = kstrtoul(s, 0, &val);
 		vdso_enabled = rc ? 0 : !!val;
 	}
 	return !rc;
@@ -84,8 +84,7 @@ struct vdso_data *vdso_data = &vdso_data_store.data;
  */
 static void vdso_init_data(struct vdso_data *vd)
 {
-	vd->ectg_available =
-		s390_user_mode != HOME_SPACE_MODE && test_facility(31);
+	vd->ectg_available = test_facility(31);
 }
 
 #ifdef CONFIG_64BIT
@@ -102,7 +101,7 @@ int vdso_alloc_per_cpu(struct _lowcore *lowcore)
 
 	lowcore->vdso_per_cpu_data = __LC_PASTE;
 
-	if (s390_user_mode == HOME_SPACE_MODE || !vdso_enabled)
+	if (!vdso_enabled)
 		return 0;
 
 	segment_table = __get_free_pages(GFP_KERNEL, SEGMENT_ORDER);
@@ -113,11 +112,11 @@ int vdso_alloc_per_cpu(struct _lowcore *lowcore)
 
 	clear_table((unsigned long *) segment_table, _SEGMENT_ENTRY_EMPTY,
 		    PAGE_SIZE << SEGMENT_ORDER);
-	clear_table((unsigned long *) page_table, _PAGE_TYPE_EMPTY,
+	clear_table((unsigned long *) page_table, _PAGE_INVALID,
 		    256*sizeof(unsigned long));
 
 	*(unsigned long *) segment_table = _SEGMENT_ENTRY + page_table;
-	*(unsigned long *) page_table = _PAGE_RO + page_frame;
+	*(unsigned long *) page_table = _PAGE_PROTECT + page_frame;
 
 	psal = (u32 *) (page_table + 256*sizeof(unsigned long));
 	aste = psal + 32;
@@ -147,7 +146,7 @@ void vdso_free_per_cpu(struct _lowcore *lowcore)
 	unsigned long segment_table, page_table, page_frame;
 	u32 *psal, *aste;
 
-	if (s390_user_mode == HOME_SPACE_MODE || !vdso_enabled)
+	if (!vdso_enabled)
 		return;
 
 	psal = (u32 *)(addr_t) lowcore->paste[4];
@@ -165,7 +164,7 @@ static void vdso_init_cr5(void)
 {
 	unsigned long cr5;
 
-	if (s390_user_mode == HOME_SPACE_MODE || !vdso_enabled)
+	if (!vdso_enabled)
 		return;
 	cr5 = offsetof(struct _lowcore, paste);
 	__ctl_load(cr5, 5, 5);
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index 9b9c1b7..8c34363 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -19,6 +19,7 @@
 #include <asm/irq_regs.h>
 #include <asm/cputime.h>
 #include <asm/vtimer.h>
+#include <asm/vtime.h>
 #include <asm/irq.h>
 #include "entry.h"
 
@@ -160,7 +161,7 @@ void __kprobes vtime_stop_cpu(void)
 	trace_hardirqs_on();
 
 	/* Wait for external, I/O or machine check interrupt. */
-	psw_mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_DAT |
+	psw_mask = PSW_KERNEL_BITS | PSW_MASK_WAIT | PSW_MASK_DAT |
 		PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK;
 	idle->nohz_delay = 0;
 
@@ -190,7 +191,7 @@ cputime64_t s390_get_idle_time(int cpu)
 		sequence = ACCESS_ONCE(idle->sequence);
 		idle_enter = ACCESS_ONCE(idle->clock_idle_enter);
 		idle_exit = ACCESS_ONCE(idle->clock_idle_exit);
-	} while ((sequence & 1) || (idle->sequence != sequence));
+	} while ((sequence & 1) || (ACCESS_ONCE(idle->sequence) != sequence));
 	return idle_enter ? ((idle_exit ?: now) - idle_enter) : 0;
 }
 
diff --git a/arch/s390/kvm/diag.c b/arch/s390/kvm/diag.c
index 3074475..3a74d8a 100644
--- a/arch/s390/kvm/diag.c
+++ b/arch/s390/kvm/diag.c
@@ -119,12 +119,21 @@ static int __diag_virtio_hypercall(struct kvm_vcpu *vcpu)
 	 * The layout is as follows:
 	 * - gpr 2 contains the subchannel id (passed as addr)
 	 * - gpr 3 contains the virtqueue index (passed as datamatch)
+	 * - gpr 4 contains the index on the bus (optionally)
 	 */
-	ret = kvm_io_bus_write(vcpu->kvm, KVM_VIRTIO_CCW_NOTIFY_BUS,
-				vcpu->run->s.regs.gprs[2],
-				8, &vcpu->run->s.regs.gprs[3]);
+	ret = kvm_io_bus_write_cookie(vcpu->kvm, KVM_VIRTIO_CCW_NOTIFY_BUS,
+				      vcpu->run->s.regs.gprs[2],
+				      8, &vcpu->run->s.regs.gprs[3],
+				      vcpu->run->s.regs.gprs[4]);
 	srcu_read_unlock(&vcpu->kvm->srcu, idx);
-	/* kvm_io_bus_write returns -EOPNOTSUPP if it found no match. */
+
+	/*
+	 * Return cookie in gpr 2, but don't overwrite the register if the
+	 * diagnose will be handled by userspace.
+	 */
+	if (ret != -EOPNOTSUPP)
+		vcpu->run->s.regs.gprs[2] = ret;
+	/* kvm_io_bus_write_cookie returns -EOPNOTSUPP if it found no match. */
 	return ret < 0 ? ret : 0;
 }
 
diff --git a/arch/s390/kvm/gaccess.h b/arch/s390/kvm/gaccess.h
index 302e0e5..99d789e 100644
--- a/arch/s390/kvm/gaccess.h
+++ b/arch/s390/kvm/gaccess.h
@@ -42,9 +42,11 @@ static inline void __user *__gptr_to_uptr(struct kvm_vcpu *vcpu,
 ({								\
 	__typeof__(gptr) __uptr = __gptr_to_uptr(vcpu, gptr, 1);\
 	int __mask = sizeof(__typeof__(*(gptr))) - 1;		\
-	int __ret = PTR_RET((void __force *)__uptr);		\
+	int __ret;						\
 								\
-	if (!__ret) {						\
+	if (IS_ERR((void __force *)__uptr)) {			\
+		__ret = PTR_ERR((void __force *)__uptr);	\
+	} else {						\
 		BUG_ON((unsigned long)__uptr & __mask);		\
 		__ret = get_user(x, __uptr);			\
 	}							\
@@ -55,9 +57,11 @@ static inline void __user *__gptr_to_uptr(struct kvm_vcpu *vcpu,
 ({								\
 	__typeof__(gptr) __uptr = __gptr_to_uptr(vcpu, gptr, 1);\
 	int __mask = sizeof(__typeof__(*(gptr))) - 1;		\
-	int __ret = PTR_RET((void __force *)__uptr);		\
+	int __ret;						\
 								\
-	if (!__ret) {						\
+	if (IS_ERR((void __force *)__uptr)) {			\
+		__ret = PTR_ERR((void __force *)__uptr);	\
+	} else {						\
 		BUG_ON((unsigned long)__uptr & __mask);		\
 		__ret = put_user(x, __uptr);			\
 	}							\
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index 7f35cb3..7f1f7ac 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -385,7 +385,7 @@ static int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu)
 	}
 
 	if ((!rc) && (vcpu->arch.sie_block->ckc <
-		get_tod_clock() + vcpu->arch.sie_block->epoch)) {
+		get_tod_clock_fast() + vcpu->arch.sie_block->epoch)) {
 		if ((!psw_extint_disabled(vcpu)) &&
 			(vcpu->arch.sie_block->gcr[0] & 0x800ul))
 			rc = 1;
@@ -425,7 +425,7 @@ int kvm_s390_handle_wait(struct kvm_vcpu *vcpu)
 		goto no_timer;
 	}
 
-	now = get_tod_clock() + vcpu->arch.sie_block->epoch;
+	now = get_tod_clock_fast() + vcpu->arch.sie_block->epoch;
 	if (vcpu->arch.sie_block->ckc < now) {
 		__unset_cpu_idle(vcpu);
 		return 0;
@@ -515,7 +515,7 @@ void kvm_s390_deliver_pending_interrupts(struct kvm_vcpu *vcpu)
 	}
 
 	if ((vcpu->arch.sie_block->ckc <
-		get_tod_clock() + vcpu->arch.sie_block->epoch))
+		get_tod_clock_fast() + vcpu->arch.sie_block->epoch))
 		__try_deliver_ckc_interrupt(vcpu);
 
 	if (atomic_read(&fi->active)) {
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 34c1c9a..ed8064c 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -28,6 +28,7 @@
 #include <asm/pgtable.h>
 #include <asm/nmi.h>
 #include <asm/switch_to.h>
+#include <asm/facility.h>
 #include <asm/sclp.h>
 #include "kvm-s390.h"
 #include "gaccess.h"
@@ -84,9 +85,15 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ NULL }
 };
 
-static unsigned long long *facilities;
+unsigned long *vfacilities;
 static struct gmap_notifier gmap_notifier;
 
+/* test availability of vfacility */
+static inline int test_vfacility(unsigned long nr)
+{
+	return __test_facility(nr, (void *) vfacilities);
+}
+
 /* Section: not file related */
 int kvm_arch_hardware_enable(void *garbage)
 {
@@ -336,10 +343,11 @@ void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu)
 
 void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 {
-	save_fp_regs(&vcpu->arch.host_fpregs);
+	save_fp_ctl(&vcpu->arch.host_fpregs.fpc);
+	save_fp_regs(vcpu->arch.host_fpregs.fprs);
 	save_access_regs(vcpu->arch.host_acrs);
-	vcpu->arch.guest_fpregs.fpc &= FPC_VALID_MASK;
-	restore_fp_regs(&vcpu->arch.guest_fpregs);
+	restore_fp_ctl(&vcpu->arch.guest_fpregs.fpc);
+	restore_fp_regs(vcpu->arch.guest_fpregs.fprs);
 	restore_access_regs(vcpu->run->s.regs.acrs);
 	gmap_enable(vcpu->arch.gmap);
 	atomic_set_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
@@ -349,9 +357,11 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 {
 	atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
 	gmap_disable(vcpu->arch.gmap);
-	save_fp_regs(&vcpu->arch.guest_fpregs);
+	save_fp_ctl(&vcpu->arch.guest_fpregs.fpc);
+	save_fp_regs(vcpu->arch.guest_fpregs.fprs);
 	save_access_regs(vcpu->run->s.regs.acrs);
-	restore_fp_regs(&vcpu->arch.host_fpregs);
+	restore_fp_ctl(&vcpu->arch.host_fpregs.fpc);
+	restore_fp_regs(vcpu->arch.host_fpregs.fprs);
 	restore_access_regs(vcpu->arch.host_acrs);
 }
 
@@ -387,7 +397,7 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 	vcpu->arch.sie_block->ecb   = 6;
 	vcpu->arch.sie_block->ecb2  = 8;
 	vcpu->arch.sie_block->eca   = 0xC1002001U;
-	vcpu->arch.sie_block->fac   = (int) (long) facilities;
+	vcpu->arch.sie_block->fac   = (int) (long) vfacilities;
 	hrtimer_init(&vcpu->arch.ckc_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
 	tasklet_init(&vcpu->arch.tasklet, kvm_s390_tasklet,
 		     (unsigned long) vcpu);
@@ -611,9 +621,12 @@ int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
 
 int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
 {
+	if (test_fp_ctl(fpu->fpc))
+		return -EINVAL;
 	memcpy(&vcpu->arch.guest_fpregs.fprs, &fpu->fprs, sizeof(fpu->fprs));
-	vcpu->arch.guest_fpregs.fpc = fpu->fpc & FPC_VALID_MASK;
-	restore_fp_regs(&vcpu->arch.guest_fpregs);
+	vcpu->arch.guest_fpregs.fpc = fpu->fpc;
+	restore_fp_ctl(&vcpu->arch.guest_fpregs.fpc);
+	restore_fp_regs(vcpu->arch.guest_fpregs.fprs);
 	return 0;
 }
 
@@ -869,7 +882,8 @@ int kvm_s390_vcpu_store_status(struct kvm_vcpu *vcpu, unsigned long addr)
 	 * copying in vcpu load/put. Lets update our copies before we save
 	 * it into the save area
 	 */
-	save_fp_regs(&vcpu->arch.guest_fpregs);
+	save_fp_ctl(&vcpu->arch.guest_fpregs.fpc);
+	save_fp_regs(vcpu->arch.guest_fpregs.fprs);
 	save_access_regs(vcpu->run->s.regs.acrs);
 
 	if (__guestcopy(vcpu, addr + offsetof(struct save_area, fp_regs),
@@ -1063,6 +1077,10 @@ int kvm_arch_create_memslot(struct kvm_memory_slot *slot, unsigned long npages)
 	return 0;
 }
 
+void kvm_arch_memslots_updated(struct kvm *kvm)
+{
+}
+
 /* Section: memory related */
 int kvm_arch_prepare_memory_region(struct kvm *kvm,
 				   struct kvm_memory_slot *memslot,
@@ -1129,20 +1147,20 @@ static int __init kvm_s390_init(void)
 	 * to hold the maximum amount of facilities. On the other hand, we
 	 * only set facilities that are known to work in KVM.
 	 */
-	facilities = (unsigned long long *) get_zeroed_page(GFP_KERNEL|GFP_DMA);
-	if (!facilities) {
+	vfacilities = (unsigned long *) get_zeroed_page(GFP_KERNEL|GFP_DMA);
+	if (!vfacilities) {
 		kvm_exit();
 		return -ENOMEM;
 	}
-	memcpy(facilities, S390_lowcore.stfle_fac_list, 16);
-	facilities[0] &= 0xff82fff3f47c0000ULL;
-	facilities[1] &= 0x001c000000000000ULL;
+	memcpy(vfacilities, S390_lowcore.stfle_fac_list, 16);
+	vfacilities[0] &= 0xff82fff3f47c0000UL;
+	vfacilities[1] &= 0x001c000000000000UL;
 	return 0;
 }
 
 static void __exit kvm_s390_exit(void)
 {
-	free_page((unsigned long) facilities);
+	free_page((unsigned long) vfacilities);
 	kvm_exit();
 }
 
diff --git a/arch/s390/kvm/kvm-s390.h b/arch/s390/kvm/kvm-s390.h
index 028ca9f..dc99f1c 100644
--- a/arch/s390/kvm/kvm-s390.h
+++ b/arch/s390/kvm/kvm-s390.h
@@ -24,6 +24,9 @@
 
 typedef int (*intercept_handler_t)(struct kvm_vcpu *vcpu);
 
+/* declare vfacilities extern */
+extern unsigned long *vfacilities;
+
 /* negativ values are error codes, positive values for internal conditions */
 #define SIE_INTERCEPT_RERUNVCPU		(1<<0)
 #define SIE_INTERCEPT_UCONTROL		(1<<1)
@@ -112,6 +115,13 @@ static inline u64 kvm_s390_get_base_disp_rs(struct kvm_vcpu *vcpu)
 	return (base2 ? vcpu->run->s.regs.gprs[base2] : 0) + disp2;
 }
 
+/* Set the condition code in the guest program status word */
+static inline void kvm_s390_set_psw_cc(struct kvm_vcpu *vcpu, unsigned long cc)
+{
+	vcpu->arch.sie_block->gpsw.mask &= ~(3UL << 44);
+	vcpu->arch.sie_block->gpsw.mask |= cc << 44;
+}
+
 int kvm_s390_handle_wait(struct kvm_vcpu *vcpu);
 enum hrtimer_restart kvm_s390_idle_wakeup(struct hrtimer *timer);
 void kvm_s390_tasklet(unsigned long parm);
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index 4cdc54e..59200ee 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -164,8 +164,7 @@ static int handle_tpi(struct kvm_vcpu *vcpu)
 	kfree(inti);
 no_interrupt:
 	/* Set condition code and we're done. */
-	vcpu->arch.sie_block->gpsw.mask &= ~(3ul << 44);
-	vcpu->arch.sie_block->gpsw.mask |= (cc & 3ul) << 44;
+	kvm_s390_set_psw_cc(vcpu, cc);
 	return 0;
 }
 
@@ -220,15 +219,13 @@ static int handle_io_inst(struct kvm_vcpu *vcpu)
 		 * Set condition code 3 to stop the guest from issueing channel
 		 * I/O instructions.
 		 */
-		vcpu->arch.sie_block->gpsw.mask &= ~(3ul << 44);
-		vcpu->arch.sie_block->gpsw.mask |= (3 & 3ul) << 44;
+		kvm_s390_set_psw_cc(vcpu, 3);
 		return 0;
 	}
 }
 
 static int handle_stfl(struct kvm_vcpu *vcpu)
 {
-	unsigned int facility_list;
 	int rc;
 
 	vcpu->stat.instruction_stfl++;
@@ -236,15 +233,13 @@ static int handle_stfl(struct kvm_vcpu *vcpu)
 	if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE)
 		return kvm_s390_inject_program_int(vcpu, PGM_PRIVILEGED_OP);
 
-	/* only pass the facility bits, which we can handle */
-	facility_list = S390_lowcore.stfl_fac_list & 0xff82fff3;
-
 	rc = copy_to_guest(vcpu, offsetof(struct _lowcore, stfl_fac_list),
-			   &facility_list, sizeof(facility_list));
+			   vfacilities, 4);
 	if (rc)
 		return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
-	VCPU_EVENT(vcpu, 5, "store facility list value %x", facility_list);
-	trace_kvm_s390_handle_stfl(vcpu, facility_list);
+	VCPU_EVENT(vcpu, 5, "store facility list value %x",
+		   *(unsigned int *) vfacilities);
+	trace_kvm_s390_handle_stfl(vcpu, *(unsigned int *) vfacilities);
 	return 0;
 }
 
@@ -387,7 +382,7 @@ static int handle_stsi(struct kvm_vcpu *vcpu)
 		return kvm_s390_inject_program_int(vcpu, PGM_PRIVILEGED_OP);
 
 	if (fc > 3) {
-		vcpu->arch.sie_block->gpsw.mask |= 3ul << 44;	  /* cc 3 */
+		kvm_s390_set_psw_cc(vcpu, 3);
 		return 0;
 	}
 
@@ -397,7 +392,7 @@ static int handle_stsi(struct kvm_vcpu *vcpu)
 
 	if (fc == 0) {
 		vcpu->run->s.regs.gprs[0] = 3 << 28;
-		vcpu->arch.sie_block->gpsw.mask &= ~(3ul << 44);  /* cc 0 */
+		kvm_s390_set_psw_cc(vcpu, 0);
 		return 0;
 	}
 
@@ -431,12 +426,11 @@ static int handle_stsi(struct kvm_vcpu *vcpu)
 	}
 	trace_kvm_s390_handle_stsi(vcpu, fc, sel1, sel2, operand2);
 	free_page(mem);
-	vcpu->arch.sie_block->gpsw.mask &= ~(3ul << 44);
+	kvm_s390_set_psw_cc(vcpu, 0);
 	vcpu->run->s.regs.gprs[0] = 0;
 	return 0;
 out_no_data:
-	/* condition code 3 */
-	vcpu->arch.sie_block->gpsw.mask |= 3ul << 44;
+	kvm_s390_set_psw_cc(vcpu, 3);
 out_exception:
 	free_page(mem);
 	return rc;
@@ -494,12 +488,12 @@ static int handle_epsw(struct kvm_vcpu *vcpu)
 	kvm_s390_get_regs_rre(vcpu, &reg1, &reg2);
 
 	/* This basically extracts the mask half of the psw. */
-	vcpu->run->s.regs.gprs[reg1] &= 0xffffffff00000000;
+	vcpu->run->s.regs.gprs[reg1] &= 0xffffffff00000000UL;
 	vcpu->run->s.regs.gprs[reg1] |= vcpu->arch.sie_block->gpsw.mask >> 32;
 	if (reg2) {
-		vcpu->run->s.regs.gprs[reg2] &= 0xffffffff00000000;
+		vcpu->run->s.regs.gprs[reg2] &= 0xffffffff00000000UL;
 		vcpu->run->s.regs.gprs[reg2] |=
-			vcpu->arch.sie_block->gpsw.mask & 0x00000000ffffffff;
+			vcpu->arch.sie_block->gpsw.mask & 0x00000000ffffffffUL;
 	}
 	return 0;
 }
diff --git a/arch/s390/kvm/trace.h b/arch/s390/kvm/trace.h
index c2f582bb1c..0c991c6 100644
--- a/arch/s390/kvm/trace.h
+++ b/arch/s390/kvm/trace.h
@@ -4,6 +4,7 @@
 #include <linux/tracepoint.h>
 #include <asm/sigp.h>
 #include <asm/debug.h>
+#include <asm/dis.h>
 
 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM kvm
diff --git a/arch/s390/lib/Makefile b/arch/s390/lib/Makefile
index 20b0e97..b068729 100644
--- a/arch/s390/lib/Makefile
+++ b/arch/s390/lib/Makefile
@@ -2,7 +2,7 @@
 # Makefile for s390-specific library files..
 #
 
-lib-y += delay.o string.o uaccess_std.o uaccess_pt.o
+lib-y += delay.o string.o uaccess_pt.o find.o
 obj-$(CONFIG_32BIT) += div64.o qrnnd.o ucmpdi2.o mem32.o
 obj-$(CONFIG_64BIT) += mem64.o
 lib-$(CONFIG_64BIT) += uaccess_mvcos.o
diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c
index c61b9fa..a9f3d00 100644
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -44,8 +44,7 @@ static void __udelay_disabled(unsigned long long usecs)
 	do {
 		set_clock_comparator(end);
 		vtime_stop_cpu();
-		local_irq_disable();
-	} while (get_tod_clock() < end);
+	} while (get_tod_clock_fast() < end);
 	lockdep_on();
 	__ctl_load(cr0, 0, 0);
 	__ctl_load(cr6, 6, 6);
@@ -56,7 +55,7 @@ static void __udelay_enabled(unsigned long long usecs)
 {
 	u64 clock_saved, end;
 
-	end = get_tod_clock() + (usecs << 12);
+	end = get_tod_clock_fast() + (usecs << 12);
 	do {
 		clock_saved = 0;
 		if (end < S390_lowcore.clock_comparator) {
@@ -64,10 +63,9 @@ static void __udelay_enabled(unsigned long long usecs)
 			set_clock_comparator(end);
 		}
 		vtime_stop_cpu();
-		local_irq_disable();
 		if (clock_saved)
 			local_tick_enable(clock_saved);
-	} while (get_tod_clock() < end);
+	} while (get_tod_clock_fast() < end);
 }
 
 /*
@@ -111,8 +109,8 @@ void udelay_simple(unsigned long long usecs)
 {
 	u64 end;
 
-	end = get_tod_clock() + (usecs << 12);
-	while (get_tod_clock() < end)
+	end = get_tod_clock_fast() + (usecs << 12);
+	while (get_tod_clock_fast() < end)
 		cpu_relax();
 }
 
@@ -122,10 +120,10 @@ void __ndelay(unsigned long long nsecs)
 
 	nsecs <<= 9;
 	do_div(nsecs, 125);
-	end = get_tod_clock() + nsecs;
+	end = get_tod_clock_fast() + nsecs;
 	if (nsecs & ~0xfffUL)
 		__udelay(nsecs >> 12);
-	while (get_tod_clock() < end)
+	while (get_tod_clock_fast() < end)
 		barrier();
 }
 EXPORT_SYMBOL(__ndelay);
diff --git a/arch/s390/lib/find.c b/arch/s390/lib/find.c
new file mode 100644
index 0000000..620d34d
--- /dev/null
+++ b/arch/s390/lib/find.c
@@ -0,0 +1,77 @@
+/*
+ * MSB0 numbered special bitops handling.
+ *
+ * On s390x the bits are numbered:
+ *   |0..............63|64............127|128...........191|192...........255|
+ * and on s390:
+ *   |0.....31|31....63|64....95|96...127|128..159|160..191|192..223|224..255|
+ *
+ * The reason for this bit numbering is the fact that the hardware sets bits
+ * in a bitmap starting at bit 0 (MSB) and we don't want to scan the bitmap
+ * from the 'wrong end'.
+ */
+
+#include <linux/compiler.h>
+#include <linux/bitops.h>
+#include <linux/export.h>
+
+unsigned long find_first_bit_inv(const unsigned long *addr, unsigned long size)
+{
+	const unsigned long *p = addr;
+	unsigned long result = 0;
+	unsigned long tmp;
+
+	while (size & ~(BITS_PER_LONG - 1)) {
+		if ((tmp = *(p++)))
+			goto found;
+		result += BITS_PER_LONG;
+		size -= BITS_PER_LONG;
+	}
+	if (!size)
+		return result;
+	tmp = (*p) & (~0UL << (BITS_PER_LONG - size));
+	if (!tmp)		/* Are any bits set? */
+		return result + size;	/* Nope. */
+found:
+	return result + (__fls(tmp) ^ (BITS_PER_LONG - 1));
+}
+EXPORT_SYMBOL(find_first_bit_inv);
+
+unsigned long find_next_bit_inv(const unsigned long *addr, unsigned long size,
+				unsigned long offset)
+{
+	const unsigned long *p = addr + (offset / BITS_PER_LONG);
+	unsigned long result = offset & ~(BITS_PER_LONG - 1);
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset %= BITS_PER_LONG;
+	if (offset) {
+		tmp = *(p++);
+		tmp &= (~0UL >> offset);
+		if (size < BITS_PER_LONG)
+			goto found_first;
+		if (tmp)
+			goto found_middle;
+		size -= BITS_PER_LONG;
+		result += BITS_PER_LONG;
+	}
+	while (size & ~(BITS_PER_LONG-1)) {
+		if ((tmp = *(p++)))
+			goto found_middle;
+		result += BITS_PER_LONG;
+		size -= BITS_PER_LONG;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+found_first:
+	tmp &= (~0UL << (BITS_PER_LONG - size));
+	if (!tmp)		/* Are any bits set? */
+		return result + size;	/* Nope. */
+found_middle:
+	return result + (__fls(tmp) ^ (BITS_PER_LONG - 1));
+}
+EXPORT_SYMBOL(find_next_bit_inv);
diff --git a/arch/s390/lib/uaccess_mvcos.c b/arch/s390/lib/uaccess_mvcos.c
index 1829742..4b7993b 100644
--- a/arch/s390/lib/uaccess_mvcos.c
+++ b/arch/s390/lib/uaccess_mvcos.c
@@ -65,13 +65,6 @@ static size_t copy_from_user_mvcos(size_t size, const void __user *ptr, void *x)
 	return size;
 }
 
-static size_t copy_from_user_mvcos_check(size_t size, const void __user *ptr, void *x)
-{
-	if (size <= 256)
-		return copy_from_user_std(size, ptr, x);
-	return copy_from_user_mvcos(size, ptr, x);
-}
-
 static size_t copy_to_user_mvcos(size_t size, void __user *ptr, const void *x)
 {
 	register unsigned long reg0 asm("0") = 0x810000UL;
@@ -101,14 +94,6 @@ static size_t copy_to_user_mvcos(size_t size, void __user *ptr, const void *x)
 	return size;
 }
 
-static size_t copy_to_user_mvcos_check(size_t size, void __user *ptr,
-				       const void *x)
-{
-	if (size <= 256)
-		return copy_to_user_std(size, ptr, x);
-	return copy_to_user_mvcos(size, ptr, x);
-}
-
 static size_t copy_in_user_mvcos(size_t size, void __user *to,
 				 const void __user *from)
 {
@@ -201,23 +186,8 @@ static size_t strncpy_from_user_mvcos(size_t count, const char __user *src,
 }
 
 struct uaccess_ops uaccess_mvcos = {
-	.copy_from_user = copy_from_user_mvcos_check,
-	.copy_from_user_small = copy_from_user_std,
-	.copy_to_user = copy_to_user_mvcos_check,
-	.copy_to_user_small = copy_to_user_std,
-	.copy_in_user = copy_in_user_mvcos,
-	.clear_user = clear_user_mvcos,
-	.strnlen_user = strnlen_user_std,
-	.strncpy_from_user = strncpy_from_user_std,
-	.futex_atomic_op = futex_atomic_op_std,
-	.futex_atomic_cmpxchg = futex_atomic_cmpxchg_std,
-};
-
-struct uaccess_ops uaccess_mvcos_switch = {
 	.copy_from_user = copy_from_user_mvcos,
-	.copy_from_user_small = copy_from_user_mvcos,
 	.copy_to_user = copy_to_user_mvcos,
-	.copy_to_user_small = copy_to_user_mvcos,
 	.copy_in_user = copy_in_user_mvcos,
 	.clear_user = clear_user_mvcos,
 	.strnlen_user = strnlen_user_mvcos,
diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c
index 50ea137..97e03ca 100644
--- a/arch/s390/lib/uaccess_pt.c
+++ b/arch/s390/lib/uaccess_pt.c
@@ -86,28 +86,28 @@ static unsigned long follow_table(struct mm_struct *mm,
 	switch (mm->context.asce_bits & _ASCE_TYPE_MASK) {
 	case _ASCE_TYPE_REGION1:
 		table = table + ((address >> 53) & 0x7ff);
-		if (unlikely(*table & _REGION_ENTRY_INV))
+		if (unlikely(*table & _REGION_ENTRY_INVALID))
 			return -0x39UL;
 		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
 		/* fallthrough */
 	case _ASCE_TYPE_REGION2:
 		table = table + ((address >> 42) & 0x7ff);
-		if (unlikely(*table & _REGION_ENTRY_INV))
+		if (unlikely(*table & _REGION_ENTRY_INVALID))
 			return -0x3aUL;
 		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
 		/* fallthrough */
 	case _ASCE_TYPE_REGION3:
 		table = table + ((address >> 31) & 0x7ff);
-		if (unlikely(*table & _REGION_ENTRY_INV))
+		if (unlikely(*table & _REGION_ENTRY_INVALID))
 			return -0x3bUL;
 		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
 		/* fallthrough */
 	case _ASCE_TYPE_SEGMENT:
 		table = table + ((address >> 20) & 0x7ff);
-		if (unlikely(*table & _SEGMENT_ENTRY_INV))
+		if (unlikely(*table & _SEGMENT_ENTRY_INVALID))
 			return -0x10UL;
 		if (unlikely(*table & _SEGMENT_ENTRY_LARGE)) {
-			if (write && (*table & _SEGMENT_ENTRY_RO))
+			if (write && (*table & _SEGMENT_ENTRY_PROTECT))
 				return -0x04UL;
 			return (*table & _SEGMENT_ENTRY_ORIGIN_LARGE) +
 				(address & ~_SEGMENT_ENTRY_ORIGIN_LARGE);
@@ -117,7 +117,7 @@ static unsigned long follow_table(struct mm_struct *mm,
 	table = table + ((address >> 12) & 0xff);
 	if (unlikely(*table & _PAGE_INVALID))
 		return -0x11UL;
-	if (write && (*table & _PAGE_RO))
+	if (write && (*table & _PAGE_PROTECT))
 		return -0x04UL;
 	return (*table & PAGE_MASK) + (address & ~PAGE_MASK);
 }
@@ -130,13 +130,13 @@ static unsigned long follow_table(struct mm_struct *mm,
 	unsigned long *table = (unsigned long *)__pa(mm->pgd);
 
 	table = table + ((address >> 20) & 0x7ff);
-	if (unlikely(*table & _SEGMENT_ENTRY_INV))
+	if (unlikely(*table & _SEGMENT_ENTRY_INVALID))
 		return -0x10UL;
 	table = (unsigned long *)(*table & _SEGMENT_ENTRY_ORIGIN);
 	table = table + ((address >> 12) & 0xff);
 	if (unlikely(*table & _PAGE_INVALID))
 		return -0x11UL;
-	if (write && (*table & _PAGE_RO))
+	if (write && (*table & _PAGE_PROTECT))
 		return -0x04UL;
 	return (*table & PAGE_MASK) + (address & ~PAGE_MASK);
 }
@@ -461,9 +461,7 @@ int futex_atomic_cmpxchg_pt(u32 *uval, u32 __user *uaddr,
 
 struct uaccess_ops uaccess_pt = {
 	.copy_from_user		= copy_from_user_pt,
-	.copy_from_user_small	= copy_from_user_pt,
 	.copy_to_user		= copy_to_user_pt,
-	.copy_to_user_small	= copy_to_user_pt,
 	.copy_in_user		= copy_in_user_pt,
 	.clear_user		= clear_user_pt,
 	.strnlen_user		= strnlen_user_pt,
diff --git a/arch/s390/lib/uaccess_std.c b/arch/s390/lib/uaccess_std.c
deleted file mode 100644
index 4a75d47..0000000
--- a/arch/s390/lib/uaccess_std.c
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- *  Standard user space access functions based on mvcp/mvcs and doing
- *  interesting things in the secondary space mode.
- *
- *    Copyright IBM Corp. 2006
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
- *		 Gerald Schaefer (gerald.schaefer@de.ibm.com)
- */
-
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/uaccess.h>
-#include <asm/futex.h>
-#include "uaccess.h"
-
-#ifndef CONFIG_64BIT
-#define AHI	"ahi"
-#define ALR	"alr"
-#define CLR	"clr"
-#define LHI	"lhi"
-#define SLR	"slr"
-#else
-#define AHI	"aghi"
-#define ALR	"algr"
-#define CLR	"clgr"
-#define LHI	"lghi"
-#define SLR	"slgr"
-#endif
-
-size_t copy_from_user_std(size_t size, const void __user *ptr, void *x)
-{
-	unsigned long tmp1, tmp2;
-
-	tmp1 = -256UL;
-	asm volatile(
-		"0: mvcp  0(%0,%2),0(%1),%3\n"
-		"10:jz    8f\n"
-		"1:"ALR"  %0,%3\n"
-		"   la    %1,256(%1)\n"
-		"   la    %2,256(%2)\n"
-		"2: mvcp  0(%0,%2),0(%1),%3\n"
-		"11:jnz   1b\n"
-		"   j     8f\n"
-		"3: la    %4,255(%1)\n"	/* %4 = ptr + 255 */
-		"  "LHI"  %3,-4096\n"
-		"   nr    %4,%3\n"	/* %4 = (ptr + 255) & -4096 */
-		"  "SLR"  %4,%1\n"
-		"  "CLR"  %0,%4\n"	/* copy crosses next page boundary? */
-		"   jnh   5f\n"
-		"4: mvcp  0(%4,%2),0(%1),%3\n"
-		"12:"SLR"  %0,%4\n"
-		"  "ALR"  %2,%4\n"
-		"5:"LHI"  %4,-1\n"
-		"  "ALR"  %4,%0\n"	/* copy remaining size, subtract 1 */
-		"   bras  %3,7f\n"	/* memset loop */
-		"   xc    0(1,%2),0(%2)\n"
-		"6: xc    0(256,%2),0(%2)\n"
-		"   la    %2,256(%2)\n"
-		"7:"AHI"  %4,-256\n"
-		"   jnm   6b\n"
-		"   ex    %4,0(%3)\n"
-		"   j     9f\n"
-		"8:"SLR"  %0,%0\n"
-		"9: \n"
-		EX_TABLE(0b,3b) EX_TABLE(2b,3b) EX_TABLE(4b,5b)
-		EX_TABLE(10b,3b) EX_TABLE(11b,3b) EX_TABLE(12b,5b)
-		: "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2)
-		: : "cc", "memory");
-	return size;
-}
-
-static size_t copy_from_user_std_check(size_t size, const void __user *ptr,
-				       void *x)
-{
-	if (size <= 1024)
-		return copy_from_user_std(size, ptr, x);
-	return copy_from_user_pt(size, ptr, x);
-}
-
-size_t copy_to_user_std(size_t size, void __user *ptr, const void *x)
-{
-	unsigned long tmp1, tmp2;
-
-	tmp1 = -256UL;
-	asm volatile(
-		"0: mvcs  0(%0,%1),0(%2),%3\n"
-		"7: jz    5f\n"
-		"1:"ALR"  %0,%3\n"
-		"   la    %1,256(%1)\n"
-		"   la    %2,256(%2)\n"
-		"2: mvcs  0(%0,%1),0(%2),%3\n"
-		"8: jnz   1b\n"
-		"   j     5f\n"
-		"3: la    %4,255(%1)\n" /* %4 = ptr + 255 */
-		"  "LHI"  %3,-4096\n"
-		"   nr    %4,%3\n"	/* %4 = (ptr + 255) & -4096 */
-		"  "SLR"  %4,%1\n"
-		"  "CLR"  %0,%4\n"	/* copy crosses next page boundary? */
-		"   jnh   6f\n"
-		"4: mvcs  0(%4,%1),0(%2),%3\n"
-		"9:"SLR"  %0,%4\n"
-		"   j     6f\n"
-		"5:"SLR"  %0,%0\n"
-		"6: \n"
-		EX_TABLE(0b,3b) EX_TABLE(2b,3b) EX_TABLE(4b,6b)
-		EX_TABLE(7b,3b) EX_TABLE(8b,3b) EX_TABLE(9b,6b)
-		: "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2)
-		: : "cc", "memory");
-	return size;
-}
-
-static size_t copy_to_user_std_check(size_t size, void __user *ptr,
-				     const void *x)
-{
-	if (size <= 1024)
-		return copy_to_user_std(size, ptr, x);
-	return copy_to_user_pt(size, ptr, x);
-}
-
-static size_t copy_in_user_std(size_t size, void __user *to,
-			       const void __user *from)
-{
-	unsigned long tmp1;
-
-	asm volatile(
-		"   sacf  256\n"
-		"  "AHI"  %0,-1\n"
-		"   jo    5f\n"
-		"   bras  %3,3f\n"
-		"0:"AHI"  %0,257\n"
-		"1: mvc   0(1,%1),0(%2)\n"
-		"   la    %1,1(%1)\n"
-		"   la    %2,1(%2)\n"
-		"  "AHI"  %0,-1\n"
-		"   jnz   1b\n"
-		"   j     5f\n"
-		"2: mvc   0(256,%1),0(%2)\n"
-		"   la    %1,256(%1)\n"
-		"   la    %2,256(%2)\n"
-		"3:"AHI"  %0,-256\n"
-		"   jnm   2b\n"
-		"4: ex    %0,1b-0b(%3)\n"
-		"5: "SLR"  %0,%0\n"
-		"6: sacf  0\n"
-		EX_TABLE(1b,6b) EX_TABLE(2b,0b) EX_TABLE(4b,0b)
-		: "+a" (size), "+a" (to), "+a" (from), "=a" (tmp1)
-		: : "cc", "memory");
-	return size;
-}
-
-static size_t clear_user_std(size_t size, void __user *to)
-{
-	unsigned long tmp1, tmp2;
-
-	asm volatile(
-		"   sacf  256\n"
-		"  "AHI"  %0,-1\n"
-		"   jo    5f\n"
-		"   bras  %3,3f\n"
-		"   xc    0(1,%1),0(%1)\n"
-		"0:"AHI"  %0,257\n"
-		"   la    %2,255(%1)\n" /* %2 = ptr + 255 */
-		"   srl   %2,12\n"
-		"   sll   %2,12\n"	/* %2 = (ptr + 255) & -4096 */
-		"  "SLR"  %2,%1\n"
-		"  "CLR"  %0,%2\n"	/* clear crosses next page boundary? */
-		"   jnh   5f\n"
-		"  "AHI"  %2,-1\n"
-		"1: ex    %2,0(%3)\n"
-		"  "AHI"  %2,1\n"
-		"  "SLR"  %0,%2\n"
-		"   j     5f\n"
-		"2: xc    0(256,%1),0(%1)\n"
-		"   la    %1,256(%1)\n"
-		"3:"AHI"  %0,-256\n"
-		"   jnm   2b\n"
-		"4: ex    %0,0(%3)\n"
-		"5: "SLR"  %0,%0\n"
-		"6: sacf  0\n"
-		EX_TABLE(1b,6b) EX_TABLE(2b,0b) EX_TABLE(4b,0b)
-		: "+a" (size), "+a" (to), "=a" (tmp1), "=a" (tmp2)
-		: : "cc", "memory");
-	return size;
-}
-
-size_t strnlen_user_std(size_t size, const char __user *src)
-{
-	register unsigned long reg0 asm("0") = 0UL;
-	unsigned long tmp1, tmp2;
-
-	if (unlikely(!size))
-		return 0;
-	asm volatile(
-		"   la    %2,0(%1)\n"
-		"   la    %3,0(%0,%1)\n"
-		"  "SLR"  %0,%0\n"
-		"   sacf  256\n"
-		"0: srst  %3,%2\n"
-		"   jo    0b\n"
-		"   la    %0,1(%3)\n"	/* strnlen_user results includes \0 */
-		"  "SLR"  %0,%1\n"
-		"1: sacf  0\n"
-		EX_TABLE(0b,1b)
-		: "+a" (size), "+a" (src), "=a" (tmp1), "=a" (tmp2)
-		: "d" (reg0) : "cc", "memory");
-	return size;
-}
-
-size_t strncpy_from_user_std(size_t count, const char __user *src, char *dst)
-{
-	size_t done, len, offset, len_str;
-
-	if (unlikely(!count))
-		return 0;
-	done = 0;
-	do {
-		offset = (size_t)src & ~PAGE_MASK;
-		len = min(count - done, PAGE_SIZE - offset);
-		if (copy_from_user_std(len, src, dst))
-			return -EFAULT;
-		len_str = strnlen(dst, len);
-		done += len_str;
-		src += len_str;
-		dst += len_str;
-	} while ((len_str == len) && (done < count));
-	return done;
-}
-
-#define __futex_atomic_op(insn, ret, oldval, newval, uaddr, oparg)	\
-	asm volatile(							\
-		"   sacf  256\n"					\
-		"0: l     %1,0(%6)\n"					\
-		"1:"insn						\
-		"2: cs    %1,%2,0(%6)\n"				\
-		"3: jl    1b\n"						\
-		"   lhi   %0,0\n"					\
-		"4: sacf  0\n"						\
-		EX_TABLE(0b,4b) EX_TABLE(2b,4b) EX_TABLE(3b,4b)		\
-		: "=d" (ret), "=&d" (oldval), "=&d" (newval),		\
-		  "=m" (*uaddr)						\
-		: "0" (-EFAULT), "d" (oparg), "a" (uaddr),		\
-		  "m" (*uaddr) : "cc");
-
-int futex_atomic_op_std(int op, u32 __user *uaddr, int oparg, int *old)
-{
-	int oldval = 0, newval, ret;
-
-	switch (op) {
-	case FUTEX_OP_SET:
-		__futex_atomic_op("lr %2,%5\n",
-				  ret, oldval, newval, uaddr, oparg);
-		break;
-	case FUTEX_OP_ADD:
-		__futex_atomic_op("lr %2,%1\nar %2,%5\n",
-				  ret, oldval, newval, uaddr, oparg);
-		break;
-	case FUTEX_OP_OR:
-		__futex_atomic_op("lr %2,%1\nor %2,%5\n",
-				  ret, oldval, newval, uaddr, oparg);
-		break;
-	case FUTEX_OP_ANDN:
-		__futex_atomic_op("lr %2,%1\nnr %2,%5\n",
-				  ret, oldval, newval, uaddr, oparg);
-		break;
-	case FUTEX_OP_XOR:
-		__futex_atomic_op("lr %2,%1\nxr %2,%5\n",
-				  ret, oldval, newval, uaddr, oparg);
-		break;
-	default:
-		ret = -ENOSYS;
-	}
-	*old = oldval;
-	return ret;
-}
-
-int futex_atomic_cmpxchg_std(u32 *uval, u32 __user *uaddr,
-			     u32 oldval, u32 newval)
-{
-	int ret;
-
-	asm volatile(
-		"   sacf 256\n"
-		"0: cs   %1,%4,0(%5)\n"
-		"1: la   %0,0\n"
-		"2: sacf 0\n"
-		EX_TABLE(0b,2b) EX_TABLE(1b,2b)
-		: "=d" (ret), "+d" (oldval), "=m" (*uaddr)
-		: "0" (-EFAULT), "d" (newval), "a" (uaddr), "m" (*uaddr)
-		: "cc", "memory" );
-	*uval = oldval;
-	return ret;
-}
-
-struct uaccess_ops uaccess_std = {
-	.copy_from_user = copy_from_user_std_check,
-	.copy_from_user_small = copy_from_user_std,
-	.copy_to_user = copy_to_user_std_check,
-	.copy_to_user_small = copy_to_user_std,
-	.copy_in_user = copy_in_user_std,
-	.clear_user = clear_user_std,
-	.strnlen_user = strnlen_user_std,
-	.strncpy_from_user = strncpy_from_user_std,
-	.futex_atomic_op = futex_atomic_op_std,
-	.futex_atomic_cmpxchg = futex_atomic_cmpxchg_std,
-};
diff --git a/arch/s390/math-emu/math.c b/arch/s390/math-emu/math.c
index 58bff54..a6ba0d7 100644
--- a/arch/s390/math-emu/math.c
+++ b/arch/s390/math-emu/math.c
@@ -19,6 +19,8 @@
 #include <math-emu/double.h>
 #include <math-emu/quad.h>
 
+#define FPC_VALID_MASK		0xF8F8FF03
+
 /*
  * I miss a macro to round a floating point number to the
  * nearest integer in the same floating point format.
diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c
index 9d84a1f..79ddd58 100644
--- a/arch/s390/mm/cmm.c
+++ b/arch/s390/mm/cmm.c
@@ -253,12 +253,12 @@ static int cmm_skip_blanks(char *cp, char **endp)
 
 static struct ctl_table cmm_table[];
 
-static int cmm_pages_handler(ctl_table *ctl, int write, void __user *buffer,
-			     size_t *lenp, loff_t *ppos)
+static int cmm_pages_handler(struct ctl_table *ctl, int write,
+			     void __user *buffer, size_t *lenp, loff_t *ppos)
 {
 	char buf[16], *p;
+	unsigned int len;
 	long nr;
-	int len;
 
 	if (!*lenp || (*ppos && !write)) {
 		*lenp = 0;
@@ -293,12 +293,12 @@ static int cmm_pages_handler(ctl_table *ctl, int write, void __user *buffer,
 	return 0;
 }
 
-static int cmm_timeout_handler(ctl_table *ctl, int write,  void __user *buffer,
-			       size_t *lenp, loff_t *ppos)
+static int cmm_timeout_handler(struct ctl_table *ctl, int write,
+			       void __user *buffer, size_t *lenp, loff_t *ppos)
 {
 	char buf[64], *p;
 	long nr, seconds;
-	int len;
+	unsigned int len;
 
 	if (!*lenp || (*ppos && !write)) {
 		*lenp = 0;
diff --git a/arch/s390/mm/dump_pagetables.c b/arch/s390/mm/dump_pagetables.c
index 3ad65b0..46d517c 100644
--- a/arch/s390/mm/dump_pagetables.c
+++ b/arch/s390/mm/dump_pagetables.c
@@ -53,7 +53,7 @@ static void print_prot(struct seq_file *m, unsigned int pr, int level)
 		seq_printf(m, "I\n");
 		return;
 	}
-	seq_printf(m, "%s", pr & _PAGE_RO ? "RO " : "RW ");
+	seq_printf(m, "%s", pr & _PAGE_PROTECT ? "RO " : "RW ");
 	seq_printf(m, "%s", pr & _PAGE_CO ? "CO " : "   ");
 	seq_putc(m, '\n');
 }
@@ -105,12 +105,12 @@ static void note_page(struct seq_file *m, struct pg_state *st,
 }
 
 /*
- * The actual page table walker functions. In order to keep the implementation
- * of print_prot() short, we only check and pass _PAGE_INVALID and _PAGE_RO
- * flags to note_page() if a region, segment or page table entry is invalid or
- * read-only.
- * After all it's just a hint that the current level being walked contains an
- * invalid or read-only entry.
+ * The actual page table walker functions. In order to keep the
+ * implementation of print_prot() short, we only check and pass
+ * _PAGE_INVALID and _PAGE_PROTECT flags to note_page() if a region,
+ * segment or page table entry is invalid or read-only.
+ * After all it's just a hint that the current level being walked
+ * contains an invalid or read-only entry.
  */
 static void walk_pte_level(struct seq_file *m, struct pg_state *st,
 			   pmd_t *pmd, unsigned long addr)
@@ -122,14 +122,14 @@ static void walk_pte_level(struct seq_file *m, struct pg_state *st,
 	for (i = 0; i < PTRS_PER_PTE && addr < max_addr; i++) {
 		st->current_address = addr;
 		pte = pte_offset_kernel(pmd, addr);
-		prot = pte_val(*pte) & (_PAGE_RO | _PAGE_INVALID);
+		prot = pte_val(*pte) & (_PAGE_PROTECT | _PAGE_INVALID);
 		note_page(m, st, prot, 4);
 		addr += PAGE_SIZE;
 	}
 }
 
 #ifdef CONFIG_64BIT
-#define _PMD_PROT_MASK (_SEGMENT_ENTRY_RO | _SEGMENT_ENTRY_CO)
+#define _PMD_PROT_MASK (_SEGMENT_ENTRY_PROTECT | _SEGMENT_ENTRY_CO)
 #else
 #define _PMD_PROT_MASK 0
 #endif
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index f00aefb..d95265b2 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -115,13 +115,8 @@ static inline int user_space_fault(unsigned long trans_exc_code)
 	if (trans_exc_code == 2)
 		/* Access via secondary space, set_fs setting decides */
 		return current->thread.mm_segment.ar4;
-	if (s390_user_mode == HOME_SPACE_MODE)
-		/* User space if the access has been done via home space. */
-		return trans_exc_code == 3;
 	/*
-	 * If the user space is not the home space the kernel runs in home
-	 * space. Access via secondary space has already been covered,
-	 * access via primary space or access register is from user space
+	 * Access via primary space or access register is from user space
 	 * and access via home space is from the kernel.
 	 */
 	return trans_exc_code != 3;
@@ -302,6 +297,8 @@ static inline int do_exception(struct pt_regs *regs, int access)
 	address = trans_exc_code & __FAIL_ADDR_MASK;
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 	flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
+	if (user_mode(regs))
+		flags |= FAULT_FLAG_USER;
 	if (access == VM_WRITE || (trans_exc_code & store_indication) == 0x400)
 		flags |= FAULT_FLAG_WRITE;
 	down_read(&mm->mmap_sem);
@@ -426,50 +423,13 @@ void __kprobes do_dat_exception(struct pt_regs *regs)
 		do_fault_error(regs, fault);
 }
 
-#ifdef CONFIG_64BIT
-void __kprobes do_asce_exception(struct pt_regs *regs)
-{
-	struct mm_struct *mm = current->mm;
-	struct vm_area_struct *vma;
-	unsigned long trans_exc_code;
-
-	/*
-	 * The instruction that caused the program check has
-	 * been nullified. Don't signal single step via SIGTRAP.
-	 */
-	clear_tsk_thread_flag(current, TIF_PER_TRAP);
-
-	trans_exc_code = regs->int_parm_long;
-	if (unlikely(!user_space_fault(trans_exc_code) || in_atomic() || !mm))
-		goto no_context;
-
-	down_read(&mm->mmap_sem);
-	vma = find_vma(mm, trans_exc_code & __FAIL_ADDR_MASK);
-	up_read(&mm->mmap_sem);
-
-	if (vma) {
-		update_mm(mm, current);
-		return;
-	}
-
-	/* User mode accesses just cause a SIGSEGV */
-	if (user_mode(regs)) {
-		do_sigsegv(regs, SEGV_MAPERR);
-		return;
-	}
-
-no_context:
-	do_no_context(regs);
-}
-#endif
-
 int __handle_fault(unsigned long uaddr, unsigned long pgm_int_code, int write)
 {
 	struct pt_regs regs;
 	int access, fault;
 
 	/* Emulate a uaccess fault from kernel mode. */
-	regs.psw.mask = psw_kernel_bits | PSW_MASK_DAT | PSW_MASK_MCHECK;
+	regs.psw.mask = PSW_KERNEL_BITS | PSW_MASK_DAT | PSW_MASK_MCHECK;
 	if (!irqs_disabled())
 		regs.psw.mask |= PSW_MASK_IO | PSW_MASK_EXT;
 	regs.psw.addr = (unsigned long) __builtin_return_address(0);
@@ -673,7 +633,7 @@ static int __init pfault_irq_init(void)
 	rc = pfault_init() == 0 ? 0 : -EOPNOTSUPP;
 	if (rc)
 		goto out_pfault;
-	service_subclass_irq_register();
+	irq_subclass_register(IRQ_SUBCLASS_SERVICE_SIGNAL);
 	hotcpu_notifier(pfault_cpu_notify, 0);
 	return 0;
 
diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c
index 1f5315d1..639fce46 100644
--- a/arch/s390/mm/gup.c
+++ b/arch/s390/mm/gup.c
@@ -24,7 +24,7 @@ static inline int gup_pte_range(pmd_t *pmdp, pmd_t pmd, unsigned long addr,
 	pte_t *ptep, pte;
 	struct page *page;
 
-	mask = (write ? _PAGE_RO : 0) | _PAGE_INVALID | _PAGE_SPECIAL;
+	mask = (write ? _PAGE_PROTECT : 0) | _PAGE_INVALID | _PAGE_SPECIAL;
 
 	ptep = ((pte_t *) pmd_deref(pmd)) + pte_index(addr);
 	do {
@@ -55,8 +55,8 @@ static inline int gup_huge_pmd(pmd_t *pmdp, pmd_t pmd, unsigned long addr,
 	struct page *head, *page, *tail;
 	int refs;
 
-	result = write ? 0 : _SEGMENT_ENTRY_RO;
-	mask = result | _SEGMENT_ENTRY_INV;
+	result = write ? 0 : _SEGMENT_ENTRY_PROTECT;
+	mask = result | _SEGMENT_ENTRY_INVALID;
 	if ((pmd_val(pmd) & mask) != result)
 		return 0;
 	VM_BUG_ON(!pfn_valid(pmd_val(pmd) >> PAGE_SHIFT));
@@ -180,9 +180,15 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
 	addr = start;
 	len = (unsigned long) nr_pages << PAGE_SHIFT;
 	end = start + len;
-	if ((end < start) || (end > TASK_SIZE))
+	if ((end <= start) || (end > TASK_SIZE))
 		return 0;
-
+	/*
+	 * local_irq_save() doesn't prevent pagetable teardown, but does
+	 * prevent the pagetables from being freed on s390.
+	 *
+	 * So long as we atomically load page table pointers versus teardown,
+	 * we can follow the address down to the the page and take a ref on it.
+	 */
 	local_irq_save(flags);
 	pgdp = pgd_offset(mm, addr);
 	do {
@@ -219,63 +225,22 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 			struct page **pages)
 {
 	struct mm_struct *mm = current->mm;
-	unsigned long addr, len, end;
-	unsigned long next;
-	pgd_t *pgdp, pgd;
-	int nr = 0;
+	int nr, ret;
 
 	start &= PAGE_MASK;
-	addr = start;
-	len = (unsigned long) nr_pages << PAGE_SHIFT;
-	end = start + len;
-	if ((end < start) || (end > TASK_SIZE))
-		goto slow_irqon;
-
-	/*
-	 * local_irq_disable() doesn't prevent pagetable teardown, but does
-	 * prevent the pagetables from being freed on s390.
-	 *
-	 * So long as we atomically load page table pointers versus teardown,
-	 * we can follow the address down to the the page and take a ref on it.
-	 */
-	local_irq_disable();
-	pgdp = pgd_offset(mm, addr);
-	do {
-		pgd = *pgdp;
-		barrier();
-		next = pgd_addr_end(addr, end);
-		if (pgd_none(pgd))
-			goto slow;
-		if (!gup_pud_range(pgdp, pgd, addr, next, write, pages, &nr))
-			goto slow;
-	} while (pgdp++, addr = next, addr != end);
-	local_irq_enable();
-
-	VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT);
-	return nr;
-
-	{
-		int ret;
-slow:
-		local_irq_enable();
-slow_irqon:
-		/* Try to get the remaining pages with get_user_pages */
-		start += nr << PAGE_SHIFT;
-		pages += nr;
-
-		down_read(&mm->mmap_sem);
-		ret = get_user_pages(current, mm, start,
-			(end - start) >> PAGE_SHIFT, write, 0, pages, NULL);
-		up_read(&mm->mmap_sem);
-
-		/* Have to be a bit careful with return values */
-		if (nr > 0) {
-			if (ret < 0)
-				ret = nr;
-			else
-				ret += nr;
-		}
-
-		return ret;
-	}
+	nr = __get_user_pages_fast(start, nr_pages, write, pages);
+	if (nr == nr_pages)
+		return nr;
+
+	/* Try to get the remaining pages with get_user_pages */
+	start += nr << PAGE_SHIFT;
+	pages += nr;
+	down_read(&mm->mmap_sem);
+	ret = get_user_pages(current, mm, start,
+			     nr_pages - nr, write, 0, pages, NULL);
+	up_read(&mm->mmap_sem);
+	/* Have to be a bit careful with return values */
+	if (nr > 0)
+		ret = (ret < 0) ? nr : ret + nr;
+	return ret;
 }
diff --git a/arch/s390/mm/hugetlbpage.c b/arch/s390/mm/hugetlbpage.c
index 121089d..d261c62 100644
--- a/arch/s390/mm/hugetlbpage.c
+++ b/arch/s390/mm/hugetlbpage.c
@@ -8,21 +8,127 @@
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
 
+static inline pmd_t __pte_to_pmd(pte_t pte)
+{
+	int none, young, prot;
+	pmd_t pmd;
+
+	/*
+	 * Convert encoding		  pte bits	  pmd bits
+	 *				.IR...wrdytp	..R...I...y.
+	 * empty			.10...000000 -> ..0...1...0.
+	 * prot-none, clean, old	.11...000001 -> ..0...1...1.
+	 * prot-none, clean, young	.11...000101 -> ..1...1...1.
+	 * prot-none, dirty, old	.10...001001 -> ..0...1...1.
+	 * prot-none, dirty, young	.10...001101 -> ..1...1...1.
+	 * read-only, clean, old	.11...010001 -> ..1...1...0.
+	 * read-only, clean, young	.01...010101 -> ..1...0...1.
+	 * read-only, dirty, old	.11...011001 -> ..1...1...0.
+	 * read-only, dirty, young	.01...011101 -> ..1...0...1.
+	 * read-write, clean, old	.11...110001 -> ..0...1...0.
+	 * read-write, clean, young	.01...110101 -> ..0...0...1.
+	 * read-write, dirty, old	.10...111001 -> ..0...1...0.
+	 * read-write, dirty, young	.00...111101 -> ..0...0...1.
+	 * Huge ptes are dirty by definition, a clean pte is made dirty
+	 * by the conversion.
+	 */
+	if (pte_present(pte)) {
+		pmd_val(pmd) = pte_val(pte) & PAGE_MASK;
+		if (pte_val(pte) & _PAGE_INVALID)
+			pmd_val(pmd) |= _SEGMENT_ENTRY_INVALID;
+		none = (pte_val(pte) & _PAGE_PRESENT) &&
+			!(pte_val(pte) & _PAGE_READ) &&
+			!(pte_val(pte) & _PAGE_WRITE);
+		prot = (pte_val(pte) & _PAGE_PROTECT) &&
+			!(pte_val(pte) & _PAGE_WRITE);
+		young = pte_val(pte) & _PAGE_YOUNG;
+		if (none || young)
+			pmd_val(pmd) |= _SEGMENT_ENTRY_YOUNG;
+		if (prot || (none && young))
+			pmd_val(pmd) |= _SEGMENT_ENTRY_PROTECT;
+	} else
+		pmd_val(pmd) = _SEGMENT_ENTRY_INVALID;
+	return pmd;
+}
+
+static inline pte_t __pmd_to_pte(pmd_t pmd)
+{
+	pte_t pte;
+
+	/*
+	 * Convert encoding	  pmd bits	  pte bits
+	 *			..R...I...y.	.IR...wrdytp
+	 * empty		..0...1...0. -> .10...000000
+	 * prot-none, old	..0...1...1. -> .10...001001
+	 * prot-none, young	..1...1...1. -> .10...001101
+	 * read-only, old	..1...1...0. -> .11...011001
+	 * read-only, young	..1...0...1. -> .01...011101
+	 * read-write, old	..0...1...0. -> .10...111001
+	 * read-write, young	..0...0...1. -> .00...111101
+	 * Huge ptes are dirty by definition
+	 */
+	if (pmd_present(pmd)) {
+		pte_val(pte) = _PAGE_PRESENT | _PAGE_LARGE | _PAGE_DIRTY |
+			(pmd_val(pmd) & PAGE_MASK);
+		if (pmd_val(pmd) & _SEGMENT_ENTRY_INVALID)
+			pte_val(pte) |= _PAGE_INVALID;
+		if (pmd_prot_none(pmd)) {
+			if (pmd_val(pmd) & _SEGMENT_ENTRY_PROTECT)
+				pte_val(pte) |= _PAGE_YOUNG;
+		} else {
+			pte_val(pte) |= _PAGE_READ;
+			if (pmd_val(pmd) & _SEGMENT_ENTRY_PROTECT)
+				pte_val(pte) |= _PAGE_PROTECT;
+			else
+				pte_val(pte) |= _PAGE_WRITE;
+			if (pmd_val(pmd) & _SEGMENT_ENTRY_YOUNG)
+				pte_val(pte) |= _PAGE_YOUNG;
+		}
+	} else
+		pte_val(pte) = _PAGE_INVALID;
+	return pte;
+}
 
 void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
-				   pte_t *pteptr, pte_t pteval)
+		     pte_t *ptep, pte_t pte)
 {
-	pmd_t *pmdp = (pmd_t *) pteptr;
-	unsigned long mask;
+	pmd_t pmd;
 
+	pmd = __pte_to_pmd(pte);
 	if (!MACHINE_HAS_HPAGE) {
-		pteptr = (pte_t *) pte_page(pteval)[1].index;
-		mask = pte_val(pteval) &
-				(_SEGMENT_ENTRY_INV | _SEGMENT_ENTRY_RO);
-		pte_val(pteval) = (_SEGMENT_ENTRY + __pa(pteptr)) | mask;
+		pmd_val(pmd) &= ~_SEGMENT_ENTRY_ORIGIN;
+		pmd_val(pmd) |= pte_page(pte)[1].index;
+	} else
+		pmd_val(pmd) |= _SEGMENT_ENTRY_LARGE | _SEGMENT_ENTRY_CO;
+	*(pmd_t *) ptep = pmd;
+}
+
+pte_t huge_ptep_get(pte_t *ptep)
+{
+	unsigned long origin;
+	pmd_t pmd;
+
+	pmd = *(pmd_t *) ptep;
+	if (!MACHINE_HAS_HPAGE && pmd_present(pmd)) {
+		origin = pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN;
+		pmd_val(pmd) &= ~_SEGMENT_ENTRY_ORIGIN;
+		pmd_val(pmd) |= *(unsigned long *) origin;
 	}
+	return __pmd_to_pte(pmd);
+}
 
-	pmd_val(*pmdp) = pte_val(pteval);
+pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
+			      unsigned long addr, pte_t *ptep)
+{
+	pmd_t *pmdp = (pmd_t *) ptep;
+	pte_t pte = huge_ptep_get(ptep);
+
+	if (MACHINE_HAS_IDTE)
+		__pmd_idte(addr, pmdp);
+	else
+		__pmd_csp(pmdp);
+	pmd_val(*pmdp) = _SEGMENT_ENTRY_EMPTY;
+	return pte;
 }
 
 int arch_prepare_hugepage(struct page *page)
@@ -58,7 +164,7 @@ void arch_release_hugepage(struct page *page)
 	ptep = (pte_t *) page[1].index;
 	if (!ptep)
 		return;
-	clear_table((unsigned long *) ptep, _PAGE_TYPE_EMPTY,
+	clear_table((unsigned long *) ptep, _PAGE_INVALID,
 		    PTRS_PER_PTE * sizeof(pte_t));
 	page_table_free(&init_mm, (unsigned long *) ptep);
 	page[1].index = 0;
@@ -117,6 +223,11 @@ int pud_huge(pud_t pud)
 	return 0;
 }
 
+int pmd_huge_support(void)
+{
+	return 1;
+}
+
 struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 			     pmd_t *pmdp, int write)
 {
diff --git a/arch/s390/mm/maccess.c b/arch/s390/mm/maccess.c
index 921fa54..d1e0e0c 100644
--- a/arch/s390/mm/maccess.c
+++ b/arch/s390/mm/maccess.c
@@ -14,6 +14,7 @@
 #include <linux/gfp.h>
 #include <linux/cpu.h>
 #include <asm/ctl_reg.h>
+#include <asm/io.h>
 
 /*
  * This function writes to kernel memory bypassing DAT and possible
diff --git a/arch/s390/mm/mmap.c b/arch/s390/mm/mmap.c
index 4002329..6bcb045 100644
--- a/arch/s390/mm/mmap.c
+++ b/arch/s390/mm/mmap.c
@@ -101,18 +101,12 @@ void arch_pick_mmap_layout(struct mm_struct *mm)
 
 int s390_mmap_check(unsigned long addr, unsigned long len, unsigned long flags)
 {
-	int rc;
-
 	if (is_compat_task() || (TASK_SIZE >= (1UL << 53)))
 		return 0;
 	if (!(flags & MAP_FIXED))
 		addr = 0;
-	if ((addr + len) >= TASK_SIZE) {
-		rc = crst_table_upgrade(current->mm, 1UL << 53);
-		if (rc)
-			return rc;
-		update_mm(current->mm, current);
-	}
+	if ((addr + len) >= TASK_SIZE)
+		return crst_table_upgrade(current->mm, 1UL << 53);
 	return 0;
 }
 
@@ -132,7 +126,6 @@ s390_get_unmapped_area(struct file *filp, unsigned long addr,
 		rc = crst_table_upgrade(mm, 1UL << 53);
 		if (rc)
 			return (unsigned long) rc;
-		update_mm(mm, current);
 		area = arch_get_unmapped_area(filp, addr, len, pgoff, flags);
 	}
 	return area;
@@ -155,7 +148,6 @@ s390_get_unmapped_area_topdown(struct file *filp, const unsigned long addr,
 		rc = crst_table_upgrade(mm, 1UL << 53);
 		if (rc)
 			return (unsigned long) rc;
-		update_mm(mm, current);
 		area = arch_get_unmapped_area_topdown(filp, addr, len,
 						      pgoff, flags);
 	}
diff --git a/arch/s390/mm/pageattr.c b/arch/s390/mm/pageattr.c
index 80adfbf..8400f49 100644
--- a/arch/s390/mm/pageattr.c
+++ b/arch/s390/mm/pageattr.c
@@ -9,6 +9,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 
+#if PAGE_DEFAULT_KEY
 static inline unsigned long sske_frame(unsigned long addr, unsigned char skey)
 {
 	asm volatile(".insn rrf,0xb22b0000,%[skey],%[addr],9,0"
@@ -16,7 +17,7 @@ static inline unsigned long sske_frame(unsigned long addr, unsigned char skey)
 	return addr;
 }
 
-void storage_key_init_range(unsigned long start, unsigned long end)
+void __storage_key_init_range(unsigned long start, unsigned long end)
 {
 	unsigned long boundary, size;
 
@@ -36,6 +37,7 @@ void storage_key_init_range(unsigned long start, unsigned long end)
 		start += PAGE_SIZE;
 	}
 }
+#endif
 
 static pte_t *walk_page_table(unsigned long addr)
 {
@@ -118,7 +120,7 @@ void kernel_map_pages(struct page *page, int numpages, int enable)
 		pte = pte_offset_kernel(pmd, address);
 		if (!enable) {
 			__ptep_ipte(address, pte);
-			pte_val(*pte) = _PAGE_TYPE_EMPTY;
+			pte_val(*pte) = _PAGE_INVALID;
 			continue;
 		}
 		pte_val(*pte) = __pa(address);
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index a8154a1..0a2e5e0 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -48,12 +48,23 @@ void crst_table_free(struct mm_struct *mm, unsigned long *table)
 }
 
 #ifdef CONFIG_64BIT
+static void __crst_table_upgrade(void *arg)
+{
+	struct mm_struct *mm = arg;
+
+	if (current->active_mm == mm)
+		update_mm(mm, current);
+	__tlb_flush_local();
+}
+
 int crst_table_upgrade(struct mm_struct *mm, unsigned long limit)
 {
 	unsigned long *table, *pgd;
 	unsigned long entry;
+	int flush;
 
 	BUG_ON(limit > (1UL << 53));
+	flush = 0;
 repeat:
 	table = crst_table_alloc(mm);
 	if (!table)
@@ -79,12 +90,15 @@ repeat:
 		mm->pgd = (pgd_t *) table;
 		mm->task_size = mm->context.asce_limit;
 		table = NULL;
+		flush = 1;
 	}
 	spin_unlock_bh(&mm->page_table_lock);
 	if (table)
 		crst_table_free(mm, table);
 	if (mm->context.asce_limit < limit)
 		goto repeat;
+	if (flush)
+		on_each_cpu(__crst_table_upgrade, mm, 0);
 	return 0;
 }
 
@@ -92,6 +106,8 @@ void crst_table_downgrade(struct mm_struct *mm, unsigned long limit)
 {
 	pgd_t *pgd;
 
+	if (current->active_mm == mm)
+		__tlb_flush_mm(mm);
 	while (mm->context.asce_limit > limit) {
 		pgd = mm->pgd;
 		switch (pgd_val(*pgd) & _REGION_ENTRY_TYPE_MASK) {
@@ -114,6 +130,8 @@ void crst_table_downgrade(struct mm_struct *mm, unsigned long limit)
 		mm->task_size = mm->context.asce_limit;
 		crst_table_free(mm, (unsigned long *) pgd);
 	}
+	if (current->active_mm == mm)
+		update_mm(mm, current);
 }
 #endif
 
@@ -161,7 +179,7 @@ static int gmap_unlink_segment(struct gmap *gmap, unsigned long *table)
 	struct gmap_rmap *rmap;
 	struct page *page;
 
-	if (*table & _SEGMENT_ENTRY_INV)
+	if (*table & _SEGMENT_ENTRY_INVALID)
 		return 0;
 	page = pfn_to_page(*table >> PAGE_SHIFT);
 	mp = (struct gmap_pgtable *) page->index;
@@ -172,7 +190,7 @@ static int gmap_unlink_segment(struct gmap *gmap, unsigned long *table)
 		kfree(rmap);
 		break;
 	}
-	*table = _SEGMENT_ENTRY_INV | _SEGMENT_ENTRY_RO | mp->vmaddr;
+	*table = mp->vmaddr | _SEGMENT_ENTRY_INVALID | _SEGMENT_ENTRY_PROTECT;
 	return 1;
 }
 
@@ -245,7 +263,9 @@ EXPORT_SYMBOL_GPL(gmap_disable);
  * gmap_alloc_table is assumed to be called with mmap_sem held
  */
 static int gmap_alloc_table(struct gmap *gmap,
-			       unsigned long *table, unsigned long init)
+			    unsigned long *table, unsigned long init)
+	__releases(&gmap->mm->page_table_lock)
+	__acquires(&gmap->mm->page_table_lock)
 {
 	struct page *page;
 	unsigned long *new;
@@ -258,7 +278,7 @@ static int gmap_alloc_table(struct gmap *gmap,
 		return -ENOMEM;
 	new = (unsigned long *) page_to_phys(page);
 	crst_table_init(new, init);
-	if (*table & _REGION_ENTRY_INV) {
+	if (*table & _REGION_ENTRY_INVALID) {
 		list_add(&page->lru, &gmap->crst_list);
 		*table = (unsigned long) new | _REGION_ENTRY_LENGTH |
 			(*table & _REGION_ENTRY_TYPE_MASK);
@@ -292,22 +312,22 @@ int gmap_unmap_segment(struct gmap *gmap, unsigned long to, unsigned long len)
 	for (off = 0; off < len; off += PMD_SIZE) {
 		/* Walk the guest addr space page table */
 		table = gmap->table + (((to + off) >> 53) & 0x7ff);
-		if (*table & _REGION_ENTRY_INV)
+		if (*table & _REGION_ENTRY_INVALID)
 			goto out;
 		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
 		table = table + (((to + off) >> 42) & 0x7ff);
-		if (*table & _REGION_ENTRY_INV)
+		if (*table & _REGION_ENTRY_INVALID)
 			goto out;
 		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
 		table = table + (((to + off) >> 31) & 0x7ff);
-		if (*table & _REGION_ENTRY_INV)
+		if (*table & _REGION_ENTRY_INVALID)
 			goto out;
 		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
 		table = table + (((to + off) >> 20) & 0x7ff);
 
 		/* Clear segment table entry in guest address space. */
 		flush |= gmap_unlink_segment(gmap, table);
-		*table = _SEGMENT_ENTRY_INV;
+		*table = _SEGMENT_ENTRY_INVALID;
 	}
 out:
 	spin_unlock(&gmap->mm->page_table_lock);
@@ -335,7 +355,7 @@ int gmap_map_segment(struct gmap *gmap, unsigned long from,
 
 	if ((from | to | len) & (PMD_SIZE - 1))
 		return -EINVAL;
-	if (len == 0 || from + len > PGDIR_SIZE ||
+	if (len == 0 || from + len > TASK_MAX_SIZE ||
 	    from + len < from || to + len < to)
 		return -EINVAL;
 
@@ -345,17 +365,17 @@ int gmap_map_segment(struct gmap *gmap, unsigned long from,
 	for (off = 0; off < len; off += PMD_SIZE) {
 		/* Walk the gmap address space page table */
 		table = gmap->table + (((to + off) >> 53) & 0x7ff);
-		if ((*table & _REGION_ENTRY_INV) &&
+		if ((*table & _REGION_ENTRY_INVALID) &&
 		    gmap_alloc_table(gmap, table, _REGION2_ENTRY_EMPTY))
 			goto out_unmap;
 		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
 		table = table + (((to + off) >> 42) & 0x7ff);
-		if ((*table & _REGION_ENTRY_INV) &&
+		if ((*table & _REGION_ENTRY_INVALID) &&
 		    gmap_alloc_table(gmap, table, _REGION3_ENTRY_EMPTY))
 			goto out_unmap;
 		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
 		table = table + (((to + off) >> 31) & 0x7ff);
-		if ((*table & _REGION_ENTRY_INV) &&
+		if ((*table & _REGION_ENTRY_INVALID) &&
 		    gmap_alloc_table(gmap, table, _SEGMENT_ENTRY_EMPTY))
 			goto out_unmap;
 		table = (unsigned long *) (*table & _REGION_ENTRY_ORIGIN);
@@ -363,7 +383,8 @@ int gmap_map_segment(struct gmap *gmap, unsigned long from,
 
 		/* Store 'from' address in an invalid segment table entry. */
 		flush |= gmap_unlink_segment(gmap, table);
-		*table = _SEGMENT_ENTRY_INV | _SEGMENT_ENTRY_RO | (from + off);
+		*table =  (from + off) | (_SEGMENT_ENTRY_INVALID |
+					  _SEGMENT_ENTRY_PROTECT);
 	}
 	spin_unlock(&gmap->mm->page_table_lock);
 	up_read(&gmap->mm->mmap_sem);
@@ -384,15 +405,15 @@ static unsigned long *gmap_table_walk(unsigned long address, struct gmap *gmap)
 	unsigned long *table;
 
 	table = gmap->table + ((address >> 53) & 0x7ff);
-	if (unlikely(*table & _REGION_ENTRY_INV))
+	if (unlikely(*table & _REGION_ENTRY_INVALID))
 		return ERR_PTR(-EFAULT);
 	table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
 	table = table + ((address >> 42) & 0x7ff);
-	if (unlikely(*table & _REGION_ENTRY_INV))
+	if (unlikely(*table & _REGION_ENTRY_INVALID))
 		return ERR_PTR(-EFAULT);
 	table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
 	table = table + ((address >> 31) & 0x7ff);
-	if (unlikely(*table & _REGION_ENTRY_INV))
+	if (unlikely(*table & _REGION_ENTRY_INVALID))
 		return ERR_PTR(-EFAULT);
 	table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
 	table = table + ((address >> 20) & 0x7ff);
@@ -422,11 +443,11 @@ unsigned long __gmap_translate(unsigned long address, struct gmap *gmap)
 		return PTR_ERR(segment_ptr);
 	/* Convert the gmap address to an mm address. */
 	segment = *segment_ptr;
-	if (!(segment & _SEGMENT_ENTRY_INV)) {
+	if (!(segment & _SEGMENT_ENTRY_INVALID)) {
 		page = pfn_to_page(segment >> PAGE_SHIFT);
 		mp = (struct gmap_pgtable *) page->index;
 		return mp->vmaddr | (address & ~PMD_MASK);
-	} else if (segment & _SEGMENT_ENTRY_RO) {
+	} else if (segment & _SEGMENT_ENTRY_PROTECT) {
 		vmaddr = segment & _SEGMENT_ENTRY_ORIGIN;
 		return vmaddr | (address & ~PMD_MASK);
 	}
@@ -517,8 +538,8 @@ static void gmap_disconnect_pgtable(struct mm_struct *mm, unsigned long *table)
 	page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
 	mp = (struct gmap_pgtable *) page->index;
 	list_for_each_entry_safe(rmap, next, &mp->mapper, list) {
-		*rmap->entry =
-			_SEGMENT_ENTRY_INV | _SEGMENT_ENTRY_RO | mp->vmaddr;
+		*rmap->entry = mp->vmaddr | (_SEGMENT_ENTRY_INVALID |
+					     _SEGMENT_ENTRY_PROTECT);
 		list_del(&rmap->list);
 		kfree(rmap);
 		flush = 1;
@@ -545,13 +566,13 @@ unsigned long __gmap_fault(unsigned long address, struct gmap *gmap)
 	/* Convert the gmap address to an mm address. */
 	while (1) {
 		segment = *segment_ptr;
-		if (!(segment & _SEGMENT_ENTRY_INV)) {
+		if (!(segment & _SEGMENT_ENTRY_INVALID)) {
 			/* Page table is present */
 			page = pfn_to_page(segment >> PAGE_SHIFT);
 			mp = (struct gmap_pgtable *) page->index;
 			return mp->vmaddr | (address & ~PMD_MASK);
 		}
-		if (!(segment & _SEGMENT_ENTRY_RO))
+		if (!(segment & _SEGMENT_ENTRY_PROTECT))
 			/* Nothing mapped in the gmap address space. */
 			break;
 		rc = gmap_connect_pgtable(address, segment, segment_ptr, gmap);
@@ -586,25 +607,25 @@ void gmap_discard(unsigned long from, unsigned long to, struct gmap *gmap)
 	while (address < to) {
 		/* Walk the gmap address space page table */
 		table = gmap->table + ((address >> 53) & 0x7ff);
-		if (unlikely(*table & _REGION_ENTRY_INV)) {
+		if (unlikely(*table & _REGION_ENTRY_INVALID)) {
 			address = (address + PMD_SIZE) & PMD_MASK;
 			continue;
 		}
 		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
 		table = table + ((address >> 42) & 0x7ff);
-		if (unlikely(*table & _REGION_ENTRY_INV)) {
+		if (unlikely(*table & _REGION_ENTRY_INVALID)) {
 			address = (address + PMD_SIZE) & PMD_MASK;
 			continue;
 		}
 		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
 		table = table + ((address >> 31) & 0x7ff);
-		if (unlikely(*table & _REGION_ENTRY_INV)) {
+		if (unlikely(*table & _REGION_ENTRY_INVALID)) {
 			address = (address + PMD_SIZE) & PMD_MASK;
 			continue;
 		}
 		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
 		table = table + ((address >> 20) & 0x7ff);
-		if (unlikely(*table & _SEGMENT_ENTRY_INV)) {
+		if (unlikely(*table & _SEGMENT_ENTRY_INVALID)) {
 			address = (address + PMD_SIZE) & PMD_MASK;
 			continue;
 		}
@@ -687,7 +708,7 @@ int gmap_ipte_notify(struct gmap *gmap, unsigned long start, unsigned long len)
 			continue;
 		/* Set notification bit in the pgste of the pte */
 		entry = *ptep;
-		if ((pte_val(entry) & (_PAGE_INVALID | _PAGE_RO)) == 0) {
+		if ((pte_val(entry) & (_PAGE_INVALID | _PAGE_PROTECT)) == 0) {
 			pgste = pgste_get_lock(ptep);
 			pgste_val(pgste) |= PGSTE_IN_BIT;
 			pgste_set_unlock(ptep, pgste);
@@ -731,6 +752,11 @@ void gmap_do_ipte_notify(struct mm_struct *mm, unsigned long addr, pte_t *pte)
 	spin_unlock(&gmap_notifier_lock);
 }
 
+static inline int page_table_with_pgste(struct page *page)
+{
+	return atomic_read(&page->_mapcount) == 0;
+}
+
 static inline unsigned long *page_table_alloc_pgste(struct mm_struct *mm,
 						    unsigned long vmaddr)
 {
@@ -750,10 +776,11 @@ static inline unsigned long *page_table_alloc_pgste(struct mm_struct *mm,
 	mp->vmaddr = vmaddr & PMD_MASK;
 	INIT_LIST_HEAD(&mp->mapper);
 	page->index = (unsigned long) mp;
-	atomic_set(&page->_mapcount, 3);
+	atomic_set(&page->_mapcount, 0);
 	table = (unsigned long *) page_to_phys(page);
-	clear_table(table, _PAGE_TYPE_EMPTY, PAGE_SIZE/2);
-	clear_table(table + PTRS_PER_PTE, 0, PAGE_SIZE/2);
+	clear_table(table, _PAGE_INVALID, PAGE_SIZE/2);
+	clear_table(table + PTRS_PER_PTE, PGSTE_HR_BIT | PGSTE_HC_BIT,
+		    PAGE_SIZE/2);
 	return table;
 }
 
@@ -791,26 +818,21 @@ int set_guest_storage_key(struct mm_struct *mm, unsigned long addr,
 	pgste_val(new) |= (key & (_PAGE_CHANGED | _PAGE_REFERENCED)) << 48;
 	pgste_val(new) |= (key & (_PAGE_ACC_BITS | _PAGE_FP_BIT)) << 56;
 	if (!(pte_val(*ptep) & _PAGE_INVALID)) {
-		unsigned long address, bits;
-		unsigned char skey;
+		unsigned long address, bits, skey;
 
 		address = pte_val(*ptep) & PAGE_MASK;
-		skey = page_get_storage_key(address);
+		skey = (unsigned long) page_get_storage_key(address);
 		bits = skey & (_PAGE_CHANGED | _PAGE_REFERENCED);
+		skey = key & (_PAGE_ACC_BITS | _PAGE_FP_BIT);
 		/* Set storage key ACC and FP */
-		page_set_storage_key(address,
-				(key & (_PAGE_ACC_BITS | _PAGE_FP_BIT)),
-				!nq);
-
+		page_set_storage_key(address, skey, !nq);
 		/* Merge host changed & referenced into pgste  */
 		pgste_val(new) |= bits << 52;
-		/* Transfer skey changed & referenced bit to kvm user bits */
-		pgste_val(new) |= bits << 45;	/* PGSTE_UR_BIT & PGSTE_UC_BIT */
 	}
 	/* changing the guest storage key is considered a change of the page */
 	if ((pgste_val(new) ^ pgste_val(old)) &
 	    (PGSTE_ACC_BITS | PGSTE_FP_BIT | PGSTE_GR_BIT | PGSTE_GC_BIT))
-		pgste_val(new) |= PGSTE_UC_BIT;
+		pgste_val(new) |= PGSTE_HC_BIT;
 
 	pgste_set_unlock(ptep, new);
 	pte_unmap_unlock(*ptep, ptl);
@@ -821,6 +843,11 @@ EXPORT_SYMBOL(set_guest_storage_key);
 
 #else /* CONFIG_PGSTE */
 
+static inline int page_table_with_pgste(struct page *page)
+{
+	return 0;
+}
+
 static inline unsigned long *page_table_alloc_pgste(struct mm_struct *mm,
 						    unsigned long vmaddr)
 {
@@ -878,7 +905,7 @@ unsigned long *page_table_alloc(struct mm_struct *mm, unsigned long vmaddr)
 		pgtable_page_ctor(page);
 		atomic_set(&page->_mapcount, 1);
 		table = (unsigned long *) page_to_phys(page);
-		clear_table(table, _PAGE_TYPE_EMPTY, PAGE_SIZE);
+		clear_table(table, _PAGE_INVALID, PAGE_SIZE);
 		spin_lock_bh(&mm->context.list_lock);
 		list_add(&page->lru, &mm->context.pgtable_list);
 	} else {
@@ -897,12 +924,12 @@ void page_table_free(struct mm_struct *mm, unsigned long *table)
 	struct page *page;
 	unsigned int bit, mask;
 
-	if (mm_has_pgste(mm)) {
+	page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
+	if (page_table_with_pgste(page)) {
 		gmap_disconnect_pgtable(mm, table);
 		return page_table_free_pgste(table);
 	}
 	/* Free 1K/2K page table fragment of a 4K page */
-	page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
 	bit = 1 << ((__pa(table) & ~PAGE_MASK)/(PTRS_PER_PTE*sizeof(pte_t)));
 	spin_lock_bh(&mm->context.list_lock);
 	if ((atomic_read(&page->_mapcount) & FRAG_MASK) != FRAG_MASK)
@@ -940,14 +967,14 @@ void page_table_free_rcu(struct mmu_gather *tlb, unsigned long *table)
 	unsigned int bit, mask;
 
 	mm = tlb->mm;
-	if (mm_has_pgste(mm)) {
+	page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
+	if (page_table_with_pgste(page)) {
 		gmap_disconnect_pgtable(mm, table);
 		table = (unsigned long *) (__pa(table) | FRAG_MASK);
 		tlb_remove_table(tlb, table);
 		return;
 	}
 	bit = 1 << ((__pa(table) & ~PAGE_MASK) / (PTRS_PER_PTE*sizeof(pte_t)));
-	page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
 	spin_lock_bh(&mm->context.list_lock);
 	if ((atomic_read(&page->_mapcount) & FRAG_MASK) != FRAG_MASK)
 		list_del(&page->lru);
@@ -959,7 +986,7 @@ void page_table_free_rcu(struct mmu_gather *tlb, unsigned long *table)
 	tlb_remove_table(tlb, table);
 }
 
-void __tlb_remove_table(void *_table)
+static void __tlb_remove_table(void *_table)
 {
 	const unsigned long mask = (FRAG_MASK << 4) | FRAG_MASK;
 	void *table = (void *)((unsigned long) _table & ~mask);
@@ -1007,7 +1034,6 @@ void tlb_table_flush(struct mmu_gather *tlb)
 	struct mmu_table_batch **batch = &tlb->batch;
 
 	if (*batch) {
-		__tlb_flush_mm(tlb->mm);
 		call_rcu_sched(&(*batch)->rcu, tlb_remove_table_rcu);
 		*batch = NULL;
 	}
@@ -1017,11 +1043,12 @@ void tlb_remove_table(struct mmu_gather *tlb, void *table)
 {
 	struct mmu_table_batch **batch = &tlb->batch;
 
+	tlb->mm->context.flush_mm = 1;
 	if (*batch == NULL) {
 		*batch = (struct mmu_table_batch *)
 			__get_free_page(GFP_NOWAIT | __GFP_NOWARN);
 		if (*batch == NULL) {
-			__tlb_flush_mm(tlb->mm);
+			__tlb_flush_mm_lazy(tlb->mm);
 			tlb_remove_table_one(table);
 			return;
 		}
@@ -1029,100 +1056,144 @@ void tlb_remove_table(struct mmu_gather *tlb, void *table)
 	}
 	(*batch)->tables[(*batch)->nr++] = table;
 	if ((*batch)->nr == MAX_TABLE_BATCH)
-		tlb_table_flush(tlb);
+		tlb_flush_mmu(tlb);
 }
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
-void thp_split_vma(struct vm_area_struct *vma)
+static inline void thp_split_vma(struct vm_area_struct *vma)
 {
 	unsigned long addr;
-	struct page *page;
 
-	for (addr = vma->vm_start; addr < vma->vm_end; addr += PAGE_SIZE) {
-		page = follow_page(vma, addr, FOLL_SPLIT);
-	}
+	for (addr = vma->vm_start; addr < vma->vm_end; addr += PAGE_SIZE)
+		follow_page(vma, addr, FOLL_SPLIT);
 }
 
-void thp_split_mm(struct mm_struct *mm)
+static inline void thp_split_mm(struct mm_struct *mm)
 {
-	struct vm_area_struct *vma = mm->mmap;
+	struct vm_area_struct *vma;
 
-	while (vma != NULL) {
+	for (vma = mm->mmap; vma != NULL; vma = vma->vm_next) {
 		thp_split_vma(vma);
 		vma->vm_flags &= ~VM_HUGEPAGE;
 		vma->vm_flags |= VM_NOHUGEPAGE;
-		vma = vma->vm_next;
 	}
+	mm->def_flags |= VM_NOHUGEPAGE;
+}
+#else
+static inline void thp_split_mm(struct mm_struct *mm)
+{
 }
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 
+static unsigned long page_table_realloc_pmd(struct mmu_gather *tlb,
+				struct mm_struct *mm, pud_t *pud,
+				unsigned long addr, unsigned long end)
+{
+	unsigned long next, *table, *new;
+	struct page *page;
+	pmd_t *pmd;
+
+	pmd = pmd_offset(pud, addr);
+	do {
+		next = pmd_addr_end(addr, end);
+again:
+		if (pmd_none_or_clear_bad(pmd))
+			continue;
+		table = (unsigned long *) pmd_deref(*pmd);
+		page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
+		if (page_table_with_pgste(page))
+			continue;
+		/* Allocate new page table with pgstes */
+		new = page_table_alloc_pgste(mm, addr);
+		if (!new)
+			return -ENOMEM;
+
+		spin_lock(&mm->page_table_lock);
+		if (likely((unsigned long *) pmd_deref(*pmd) == table)) {
+			/* Nuke pmd entry pointing to the "short" page table */
+			pmdp_flush_lazy(mm, addr, pmd);
+			pmd_clear(pmd);
+			/* Copy ptes from old table to new table */
+			memcpy(new, table, PAGE_SIZE/2);
+			clear_table(table, _PAGE_INVALID, PAGE_SIZE/2);
+			/* Establish new table */
+			pmd_populate(mm, pmd, (pte_t *) new);
+			/* Free old table with rcu, there might be a walker! */
+			page_table_free_rcu(tlb, table);
+			new = NULL;
+		}
+		spin_unlock(&mm->page_table_lock);
+		if (new) {
+			page_table_free_pgste(new);
+			goto again;
+		}
+	} while (pmd++, addr = next, addr != end);
+
+	return addr;
+}
+
+static unsigned long page_table_realloc_pud(struct mmu_gather *tlb,
+				   struct mm_struct *mm, pgd_t *pgd,
+				   unsigned long addr, unsigned long end)
+{
+	unsigned long next;
+	pud_t *pud;
+
+	pud = pud_offset(pgd, addr);
+	do {
+		next = pud_addr_end(addr, end);
+		if (pud_none_or_clear_bad(pud))
+			continue;
+		next = page_table_realloc_pmd(tlb, mm, pud, addr, next);
+		if (unlikely(IS_ERR_VALUE(next)))
+			return next;
+	} while (pud++, addr = next, addr != end);
+
+	return addr;
+}
+
+static unsigned long page_table_realloc(struct mmu_gather *tlb, struct mm_struct *mm,
+					unsigned long addr, unsigned long end)
+{
+	unsigned long next;
+	pgd_t *pgd;
+
+	pgd = pgd_offset(mm, addr);
+	do {
+		next = pgd_addr_end(addr, end);
+		if (pgd_none_or_clear_bad(pgd))
+			continue;
+		next = page_table_realloc_pud(tlb, mm, pgd, addr, next);
+		if (unlikely(IS_ERR_VALUE(next)))
+			return next;
+	} while (pgd++, addr = next, addr != end);
+
+	return 0;
+}
+
 /*
  * switch on pgstes for its userspace process (for kvm)
  */
 int s390_enable_sie(void)
 {
 	struct task_struct *tsk = current;
-	struct mm_struct *mm, *old_mm;
-
-	/* Do we have switched amode? If no, we cannot do sie */
-	if (s390_user_mode == HOME_SPACE_MODE)
-		return -EINVAL;
+	struct mm_struct *mm = tsk->mm;
+	struct mmu_gather tlb;
 
 	/* Do we have pgstes? if yes, we are done */
 	if (mm_has_pgste(tsk->mm))
 		return 0;
 
-	/* lets check if we are allowed to replace the mm */
-	task_lock(tsk);
-	if (!tsk->mm || atomic_read(&tsk->mm->mm_users) > 1 ||
-#ifdef CONFIG_AIO
-	    !hlist_empty(&tsk->mm->ioctx_list) ||
-#endif
-	    tsk->mm != tsk->active_mm) {
-		task_unlock(tsk);
-		return -EINVAL;
-	}
-	task_unlock(tsk);
-
-	/* we copy the mm and let dup_mm create the page tables with_pgstes */
-	tsk->mm->context.alloc_pgste = 1;
-	/* make sure that both mms have a correct rss state */
-	sync_mm_rss(tsk->mm);
-	mm = dup_mm(tsk);
-	tsk->mm->context.alloc_pgste = 0;
-	if (!mm)
-		return -ENOMEM;
-
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+	down_write(&mm->mmap_sem);
 	/* split thp mappings and disable thp for future mappings */
 	thp_split_mm(mm);
-	mm->def_flags |= VM_NOHUGEPAGE;
-#endif
-
-	/* Now lets check again if something happened */
-	task_lock(tsk);
-	if (!tsk->mm || atomic_read(&tsk->mm->mm_users) > 1 ||
-#ifdef CONFIG_AIO
-	    !hlist_empty(&tsk->mm->ioctx_list) ||
-#endif
-	    tsk->mm != tsk->active_mm) {
-		mmput(mm);
-		task_unlock(tsk);
-		return -EINVAL;
-	}
-
-	/* ok, we are alone. No ptrace, no threads, etc. */
-	old_mm = tsk->mm;
-	tsk->mm = tsk->active_mm = mm;
-	preempt_disable();
-	update_mm(mm, tsk);
-	atomic_inc(&mm->context.attach_count);
-	atomic_dec(&old_mm->context.attach_count);
-	cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm));
-	preempt_enable();
-	task_unlock(tsk);
-	mmput(old_mm);
-	return 0;
+	/* Reallocate the page tables with pgstes */
+	tlb_gather_mmu(&tlb, mm, 0, TASK_SIZE);
+	if (!page_table_realloc(&tlb, mm, 0, TASK_SIZE))
+		mm->context.has_pgste = 1;
+	tlb_finish_mmu(&tlb, 0, TASK_SIZE);
+	up_write(&mm->mmap_sem);
+	return mm->context.has_pgste ? 0 : -ENOMEM;
 }
 EXPORT_SYMBOL_GPL(s390_enable_sie);
 
@@ -1198,9 +1269,9 @@ pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp)
 		list_del(lh);
 	}
 	ptep = (pte_t *) pgtable;
-	pte_val(*ptep) = _PAGE_TYPE_EMPTY;
+	pte_val(*ptep) = _PAGE_INVALID;
 	ptep++;
-	pte_val(*ptep) = _PAGE_TYPE_EMPTY;
+	pte_val(*ptep) = _PAGE_INVALID;
 	return pgtable;
 }
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c
index 8b268fc..bcfb70b 100644
--- a/arch/s390/mm/vmem.c
+++ b/arch/s390/mm/vmem.c
@@ -69,7 +69,7 @@ static pte_t __ref *vmem_pte_alloc(unsigned long address)
 		pte = alloc_bootmem(PTRS_PER_PTE * sizeof(pte_t));
 	if (!pte)
 		return NULL;
-	clear_table((unsigned long *) pte, _PAGE_TYPE_EMPTY,
+	clear_table((unsigned long *) pte, _PAGE_INVALID,
 		    PTRS_PER_PTE * sizeof(pte_t));
 	return pte;
 }
@@ -101,7 +101,7 @@ static int vmem_add_mem(unsigned long start, unsigned long size, int ro)
 		    !(address & ~PUD_MASK) && (address + PUD_SIZE <= end)) {
 			pud_val(*pu_dir) = __pa(address) |
 				_REGION_ENTRY_TYPE_R3 | _REGION3_ENTRY_LARGE |
-				(ro ? _REGION_ENTRY_RO : 0);
+				(ro ? _REGION_ENTRY_PROTECT : 0);
 			address += PUD_SIZE;
 			continue;
 		}
@@ -118,7 +118,8 @@ static int vmem_add_mem(unsigned long start, unsigned long size, int ro)
 		    !(address & ~PMD_MASK) && (address + PMD_SIZE <= end)) {
 			pmd_val(*pm_dir) = __pa(address) |
 				_SEGMENT_ENTRY | _SEGMENT_ENTRY_LARGE |
-				(ro ? _SEGMENT_ENTRY_RO : 0);
+				_SEGMENT_ENTRY_YOUNG |
+				(ro ? _SEGMENT_ENTRY_PROTECT : 0);
 			address += PMD_SIZE;
 			continue;
 		}
@@ -131,7 +132,8 @@ static int vmem_add_mem(unsigned long start, unsigned long size, int ro)
 		}
 
 		pt_dir = pte_offset_kernel(pm_dir, address);
-		pte_val(*pt_dir) = __pa(address) | (ro ? _PAGE_RO : 0);
+		pte_val(*pt_dir) = __pa(address) |
+			pgprot_val(ro ? PAGE_KERNEL_RO : PAGE_KERNEL);
 		address += PAGE_SIZE;
 	}
 	ret = 0;
@@ -154,7 +156,7 @@ static void vmem_remove_range(unsigned long start, unsigned long size)
 	pte_t *pt_dir;
 	pte_t  pte;
 
-	pte_val(pte) = _PAGE_TYPE_EMPTY;
+	pte_val(pte) = _PAGE_INVALID;
 	while (address < end) {
 		pg_dir = pgd_offset_k(address);
 		if (pgd_none(*pg_dir)) {
@@ -255,7 +257,8 @@ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node)
 			new_page =__pa(vmem_alloc_pages(0));
 			if (!new_page)
 				goto out;
-			pte_val(*pt_dir) = __pa(new_page);
+			pte_val(*pt_dir) =
+				__pa(new_page) | pgprot_val(PAGE_KERNEL);
 		}
 		address += PAGE_SIZE;
 	}
diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index d5f10a4..16871da 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -12,8 +12,8 @@
 #include <linux/random.h>
 #include <linux/init.h>
 #include <asm/cacheflush.h>
-#include <asm/processor.h>
 #include <asm/facility.h>
+#include <asm/dis.h>
 
 /*
  * Conventions:
@@ -156,8 +156,8 @@ static void bpf_jit_prologue(struct bpf_jit *jit)
 		EMIT6(0xeb8ff058, 0x0024);
 		/* lgr %r14,%r15 */
 		EMIT4(0xb90400ef);
-		/* ahi %r15,<offset> */
-		EMIT4_IMM(0xa7fa0000, (jit->seen & SEEN_MEM) ? -112 : -80);
+		/* aghi %r15,<offset> */
+		EMIT4_IMM(0xa7fb0000, (jit->seen & SEEN_MEM) ? -112 : -80);
 		/* stg %r14,152(%r15) */
 		EMIT6(0xe3e0f098, 0x0024);
 	} else if ((jit->seen & SEEN_XREG) && (jit->seen & SEEN_LITERAL))
@@ -805,7 +805,7 @@ static struct bpf_binary_header *bpf_alloc_binary(unsigned int bpfsize,
 		return NULL;
 	memset(header, 0, sz);
 	header->pages = sz / PAGE_SIZE;
-	hole = sz - bpfsize + sizeof(*header);
+	hole = sz - (bpfsize + sizeof(*header));
 	/* Insert random number of illegal instructions before BPF code
 	 * and make sure the first instruction starts at an even address.
 	 */
@@ -881,7 +881,9 @@ void bpf_jit_free(struct sk_filter *fp)
 	struct bpf_binary_header *header = (void *)addr;
 
 	if (fp->bpf_func == sk_run_filter)
-		return;
+		goto free_filter;
 	set_memory_rw(addr, header->pages);
 	module_free(NULL, header);
+free_filter:
+	kfree(fp);
 }
diff --git a/arch/s390/oprofile/hwsampler.c b/arch/s390/oprofile/hwsampler.c
index b5b2916..231ceca 100644
--- a/arch/s390/oprofile/hwsampler.c
+++ b/arch/s390/oprofile/hwsampler.c
@@ -1001,7 +1001,7 @@ int hwsampler_deallocate(void)
 	if (hws_state != HWS_STOPPED)
 		goto deallocate_exit;
 
-	measurement_alert_subclass_unregister();
+	irq_subclass_unregister(IRQ_SUBCLASS_MEASUREMENT_ALERT);
 	deallocate_sdbt();
 
 	hws_state = HWS_DEALLOCATED;
@@ -1115,7 +1115,7 @@ int hwsampler_shutdown(void)
 		mutex_lock(&hws_sem);
 
 		if (hws_state == HWS_STOPPED) {
-			measurement_alert_subclass_unregister();
+			irq_subclass_unregister(IRQ_SUBCLASS_MEASUREMENT_ALERT);
 			deallocate_sdbt();
 		}
 		if (hws_wq) {
@@ -1190,7 +1190,7 @@ start_all_exit:
 	hws_oom = 1;
 	hws_flush_all = 0;
 	/* now let them in, 1407 CPUMF external interrupts */
-	measurement_alert_subclass_register();
+	irq_subclass_register(IRQ_SUBCLASS_MEASUREMENT_ALERT);
 
 	return 0;
 }
diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c
index 930783d..04e1b6a 100644
--- a/arch/s390/oprofile/init.c
+++ b/arch/s390/oprofile/init.c
@@ -346,16 +346,15 @@ static const struct file_operations timer_enabled_fops = {
 };
 
 
-static int oprofile_create_hwsampling_files(struct super_block *sb,
-					    struct dentry *root)
+static int oprofile_create_hwsampling_files(struct dentry *root)
 {
 	struct dentry *dir;
 
-	dir = oprofilefs_mkdir(sb, root, "timer");
+	dir = oprofilefs_mkdir(root, "timer");
 	if (!dir)
 		return -EINVAL;
 
-	oprofilefs_create_file(sb, dir, "enabled", &timer_enabled_fops);
+	oprofilefs_create_file(dir, "enabled", &timer_enabled_fops);
 
 	if (!hwsampler_available)
 		return 0;
@@ -376,17 +375,17 @@ static int oprofile_create_hwsampling_files(struct super_block *sb,
 		 * and can only be set to 0.
 		 */
 
-		dir = oprofilefs_mkdir(sb, root, "0");
+		dir = oprofilefs_mkdir(root, "0");
 		if (!dir)
 			return -EINVAL;
 
-		oprofilefs_create_file(sb, dir, "enabled", &hwsampler_fops);
-		oprofilefs_create_file(sb, dir, "event", &zero_fops);
-		oprofilefs_create_file(sb, dir, "count", &hw_interval_fops);
-		oprofilefs_create_file(sb, dir, "unit_mask", &zero_fops);
-		oprofilefs_create_file(sb, dir, "kernel", &kernel_fops);
-		oprofilefs_create_file(sb, dir, "user", &user_fops);
-		oprofilefs_create_ulong(sb, dir, "hw_sdbt_blocks",
+		oprofilefs_create_file(dir, "enabled", &hwsampler_fops);
+		oprofilefs_create_file(dir, "event", &zero_fops);
+		oprofilefs_create_file(dir, "count", &hw_interval_fops);
+		oprofilefs_create_file(dir, "unit_mask", &zero_fops);
+		oprofilefs_create_file(dir, "kernel", &kernel_fops);
+		oprofilefs_create_file(dir, "user", &user_fops);
+		oprofilefs_create_ulong(dir, "hw_sdbt_blocks",
 					&oprofile_sdbt_blocks);
 
 	} else {
@@ -396,19 +395,19 @@ static int oprofile_create_hwsampling_files(struct super_block *sb,
 		 * space tools.  The /dev/oprofile/hwsampling fs is
 		 * provided in that case.
 		 */
-		dir = oprofilefs_mkdir(sb, root, "hwsampling");
+		dir = oprofilefs_mkdir(root, "hwsampling");
 		if (!dir)
 			return -EINVAL;
 
-		oprofilefs_create_file(sb, dir, "hwsampler",
+		oprofilefs_create_file(dir, "hwsampler",
 				       &hwsampler_fops);
-		oprofilefs_create_file(sb, dir, "hw_interval",
+		oprofilefs_create_file(dir, "hw_interval",
 				       &hw_interval_fops);
-		oprofilefs_create_ro_ulong(sb, dir, "hw_min_interval",
+		oprofilefs_create_ro_ulong(dir, "hw_min_interval",
 					   &oprofile_min_interval);
-		oprofilefs_create_ro_ulong(sb, dir, "hw_max_interval",
+		oprofilefs_create_ro_ulong(dir, "hw_max_interval",
 					   &oprofile_max_interval);
-		oprofilefs_create_ulong(sb, dir, "hw_sdbt_blocks",
+		oprofilefs_create_ulong(dir, "hw_sdbt_blocks",
 					&oprofile_sdbt_blocks);
 	}
 	return 0;
diff --git a/arch/s390/pci/Makefile b/arch/s390/pci/Makefile
index 086a2e3..a9e1dc4 100644
--- a/arch/s390/pci/Makefile
+++ b/arch/s390/pci/Makefile
@@ -2,5 +2,5 @@
 # Makefile for the s390 PCI subsystem.
 #
 
-obj-$(CONFIG_PCI)	+= pci.o pci_dma.o pci_clp.o pci_msi.o pci_sysfs.o \
+obj-$(CONFIG_PCI)	+= pci.o pci_dma.o pci_clp.o pci_sysfs.o \
 			   pci_event.o pci_debug.o pci_insn.o
diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index e2956ad..0c9a177 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -42,45 +42,26 @@
 #define	SIC_IRQ_MODE_SINGLE		1
 
 #define ZPCI_NR_DMA_SPACES		1
-#define ZPCI_MSI_VEC_BITS		6
 #define ZPCI_NR_DEVICES			CONFIG_PCI_NR_FUNCTIONS
 
 /* list of all detected zpci devices */
-LIST_HEAD(zpci_list);
-EXPORT_SYMBOL_GPL(zpci_list);
-DEFINE_MUTEX(zpci_list_lock);
-EXPORT_SYMBOL_GPL(zpci_list_lock);
+static LIST_HEAD(zpci_list);
+static DEFINE_SPINLOCK(zpci_list_lock);
 
-static struct pci_hp_callback_ops *hotplug_ops;
+static void zpci_enable_irq(struct irq_data *data);
+static void zpci_disable_irq(struct irq_data *data);
 
-static DECLARE_BITMAP(zpci_domain, ZPCI_NR_DEVICES);
-static DEFINE_SPINLOCK(zpci_domain_lock);
-
-struct callback {
-	irq_handler_t	handler;
-	void		*data;
+static struct irq_chip zpci_irq_chip = {
+	.name = "zPCI",
+	.irq_unmask = zpci_enable_irq,
+	.irq_mask = zpci_disable_irq,
 };
 
-struct zdev_irq_map {
-	unsigned long	aibv;		/* AI bit vector */
-	int		msi_vecs;	/* consecutive MSI-vectors used */
-	int		__unused;
-	struct callback	cb[ZPCI_NR_MSI_VECS]; /* callback handler array */
-	spinlock_t	lock;		/* protect callbacks against de-reg */
-};
-
-struct intr_bucket {
-	/* amap of adapters, one bit per dev, corresponds to one irq nr */
-	unsigned long	*alloc;
-	/* AI summary bit, global page for all devices */
-	unsigned long	*aisb;
-	/* pointer to aibv and callback data in zdev */
-	struct zdev_irq_map *imap[ZPCI_NR_DEVICES];
-	/* protects the whole bucket struct */
-	spinlock_t	lock;
-};
+static DECLARE_BITMAP(zpci_domain, ZPCI_NR_DEVICES);
+static DEFINE_SPINLOCK(zpci_domain_lock);
 
-static struct intr_bucket *bucket;
+static struct airq_iv *zpci_aisb_iv;
+static struct airq_iv *zpci_aibv[ZPCI_NR_DEVICES];
 
 /* Adapter interrupt definitions */
 static void zpci_irq_handler(struct airq_struct *airq);
@@ -96,27 +77,8 @@ static DECLARE_BITMAP(zpci_iomap, ZPCI_IOMAP_MAX_ENTRIES);
 struct zpci_iomap_entry *zpci_iomap_start;
 EXPORT_SYMBOL_GPL(zpci_iomap_start);
 
-/* highest irq summary bit */
-static int __read_mostly aisb_max;
-
-static struct kmem_cache *zdev_irq_cache;
 static struct kmem_cache *zdev_fmb_cache;
 
-static inline int irq_to_msi_nr(unsigned int irq)
-{
-	return irq & ZPCI_MSI_MASK;
-}
-
-static inline int irq_to_dev_nr(unsigned int irq)
-{
-	return irq >> ZPCI_MSI_VEC_BITS;
-}
-
-static inline struct zdev_irq_map *get_imap(unsigned int irq)
-{
-	return bucket->imap[irq_to_dev_nr(irq)];
-}
-
 struct zpci_dev *get_zdev(struct pci_dev *pdev)
 {
 	return (struct zpci_dev *) pdev->sysdata;
@@ -126,22 +88,17 @@ struct zpci_dev *get_zdev_by_fid(u32 fid)
 {
 	struct zpci_dev *tmp, *zdev = NULL;
 
-	mutex_lock(&zpci_list_lock);
+	spin_lock(&zpci_list_lock);
 	list_for_each_entry(tmp, &zpci_list, entry) {
 		if (tmp->fid == fid) {
 			zdev = tmp;
 			break;
 		}
 	}
-	mutex_unlock(&zpci_list_lock);
+	spin_unlock(&zpci_list_lock);
 	return zdev;
 }
 
-bool zpci_fid_present(u32 fid)
-{
-	return (get_zdev_by_fid(fid) != NULL) ? true : false;
-}
-
 static struct zpci_dev *get_zdev_by_bus(struct pci_bus *bus)
 {
 	return (bus && bus->sysdata) ? (struct zpci_dev *) bus->sysdata : NULL;
@@ -160,30 +117,20 @@ int pci_proc_domain(struct pci_bus *bus)
 EXPORT_SYMBOL_GPL(pci_proc_domain);
 
 /* Modify PCI: Register adapter interruptions */
-static int zpci_register_airq(struct zpci_dev *zdev, unsigned int aisb,
-			      u64 aibv)
+static int zpci_set_airq(struct zpci_dev *zdev)
 {
 	u64 req = ZPCI_CREATE_REQ(zdev->fh, 0, ZPCI_MOD_FC_REG_INT);
-	struct zpci_fib *fib;
-	int rc;
-
-	fib = (void *) get_zeroed_page(GFP_KERNEL);
-	if (!fib)
-		return -ENOMEM;
-
-	fib->isc = PCI_ISC;
-	fib->noi = zdev->irq_map->msi_vecs;
-	fib->sum = 1;		/* enable summary notifications */
-	fib->aibv = aibv;
-	fib->aibvo = 0;		/* every function has its own page */
-	fib->aisb = (u64) bucket->aisb + aisb / 8;
-	fib->aisbo = aisb & ZPCI_MSI_MASK;
+	struct zpci_fib fib = {0};
 
-	rc = s390pci_mod_fc(req, fib);
-	pr_debug("%s mpcifc returned noi: %d\n", __func__, fib->noi);
+	fib.isc = PCI_ISC;
+	fib.sum = 1;		/* enable summary notifications */
+	fib.noi = airq_iv_end(zdev->aibv);
+	fib.aibv = (unsigned long) zdev->aibv->vector;
+	fib.aibvo = 0;		/* each zdev has its own interrupt vector */
+	fib.aisb = (unsigned long) zpci_aisb_iv->vector + (zdev->aisb/64)*8;
+	fib.aisbo = zdev->aisb & 63;
 
-	free_page((unsigned long) fib);
-	return rc;
+	return zpci_mod_fc(req, &fib);
 }
 
 struct mod_pci_args {
@@ -196,22 +143,14 @@ struct mod_pci_args {
 static int mod_pci(struct zpci_dev *zdev, int fn, u8 dmaas, struct mod_pci_args *args)
 {
 	u64 req = ZPCI_CREATE_REQ(zdev->fh, dmaas, fn);
-	struct zpci_fib *fib;
-	int rc;
-
-	/* The FIB must be available even if it's not used */
-	fib = (void *) get_zeroed_page(GFP_KERNEL);
-	if (!fib)
-		return -ENOMEM;
+	struct zpci_fib fib = {0};
 
-	fib->pba = args->base;
-	fib->pal = args->limit;
-	fib->iota = args->iota;
-	fib->fmb_addr = args->fmb_addr;
+	fib.pba = args->base;
+	fib.pal = args->limit;
+	fib.iota = args->iota;
+	fib.fmb_addr = args->fmb_addr;
 
-	rc = s390pci_mod_fc(req, fib);
-	free_page((unsigned long) fib);
-	return rc;
+	return zpci_mod_fc(req, &fib);
 }
 
 /* Modify PCI: Register I/O address translation parameters */
@@ -234,7 +173,7 @@ int zpci_unregister_ioat(struct zpci_dev *zdev, u8 dmaas)
 }
 
 /* Modify PCI: Unregister adapter interruptions */
-static int zpci_unregister_airq(struct zpci_dev *zdev)
+static int zpci_clear_airq(struct zpci_dev *zdev)
 {
 	struct mod_pci_args args = { 0, 0, 0, 0 };
 
@@ -283,7 +222,7 @@ static int zpci_cfg_load(struct zpci_dev *zdev, int offset, u32 *val, u8 len)
 	u64 data;
 	int rc;
 
-	rc = s390pci_load(&data, req, offset);
+	rc = zpci_load(&data, req, offset);
 	if (!rc) {
 		data = data << ((8 - len) * 8);
 		data = le64_to_cpu(data);
@@ -301,25 +240,46 @@ static int zpci_cfg_store(struct zpci_dev *zdev, int offset, u32 val, u8 len)
 
 	data = cpu_to_le64(data);
 	data = data >> ((8 - len) * 8);
-	rc = s390pci_store(data, req, offset);
+	rc = zpci_store(data, req, offset);
 	return rc;
 }
 
-void enable_irq(unsigned int irq)
+static int zpci_msi_set_mask_bits(struct msi_desc *msi, u32 mask, u32 flag)
+{
+	int offset, pos;
+	u32 mask_bits;
+
+	if (msi->msi_attrib.is_msix) {
+		offset = msi->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
+			PCI_MSIX_ENTRY_VECTOR_CTRL;
+		msi->masked = readl(msi->mask_base + offset);
+		writel(flag, msi->mask_base + offset);
+	} else if (msi->msi_attrib.maskbit) {
+		pos = (long) msi->mask_base;
+		pci_read_config_dword(msi->dev, pos, &mask_bits);
+		mask_bits &= ~(mask);
+		mask_bits |= flag & mask;
+		pci_write_config_dword(msi->dev, pos, mask_bits);
+	} else
+		return 0;
+
+	msi->msi_attrib.maskbit = !!flag;
+	return 1;
+}
+
+static void zpci_enable_irq(struct irq_data *data)
 {
-	struct msi_desc *msi = irq_get_msi_desc(irq);
+	struct msi_desc *msi = irq_get_msi_desc(data->irq);
 
 	zpci_msi_set_mask_bits(msi, 1, 0);
 }
-EXPORT_SYMBOL_GPL(enable_irq);
 
-void disable_irq(unsigned int irq)
+static void zpci_disable_irq(struct irq_data *data)
 {
-	struct msi_desc *msi = irq_get_msi_desc(irq);
+	struct msi_desc *msi = irq_get_msi_desc(data->irq);
 
 	zpci_msi_set_mask_bits(msi, 1, 1);
 }
-EXPORT_SYMBOL_GPL(disable_irq);
 
 void pcibios_fixup_bus(struct pci_bus *bus)
 {
@@ -404,152 +364,141 @@ static struct pci_ops pci_root_ops = {
 	.write = pci_write,
 };
 
-/* store the last handled bit to implement fair scheduling of devices */
-static DEFINE_PER_CPU(unsigned long, next_sbit);
-
 static void zpci_irq_handler(struct airq_struct *airq)
 {
-	unsigned long sbit, mbit, last = 0, start = __get_cpu_var(next_sbit);
-	int rescan = 0, max = aisb_max;
-	struct zdev_irq_map *imap;
+	unsigned long si, ai;
+	struct airq_iv *aibv;
+	int irqs_on = 0;
 
 	inc_irq_stat(IRQIO_PCI);
-	sbit = start;
-
-scan:
-	/* find summary_bit */
-	for_each_set_bit_left_cont(sbit, bucket->aisb, max) {
-		clear_bit(63 - (sbit & 63), bucket->aisb + (sbit >> 6));
-		last = sbit;
+	for (si = 0;;) {
+		/* Scan adapter summary indicator bit vector */
+		si = airq_iv_scan(zpci_aisb_iv, si, airq_iv_end(zpci_aisb_iv));
+		if (si == -1UL) {
+			if (irqs_on++)
+				/* End of second scan with interrupts on. */
+				break;
+			/* First scan complete, reenable interrupts. */
+			zpci_set_irq_ctrl(SIC_IRQ_MODE_SINGLE, NULL, PCI_ISC);
+			si = 0;
+			continue;
+		}
 
-		/* find vector bit */
-		imap = bucket->imap[sbit];
-		for_each_set_bit_left(mbit, &imap->aibv, imap->msi_vecs) {
+		/* Scan the adapter interrupt vector for this device. */
+		aibv = zpci_aibv[si];
+		for (ai = 0;;) {
+			ai = airq_iv_scan(aibv, ai, airq_iv_end(aibv));
+			if (ai == -1UL)
+				break;
 			inc_irq_stat(IRQIO_MSI);
-			clear_bit(63 - mbit, &imap->aibv);
-
-			spin_lock(&imap->lock);
-			if (imap->cb[mbit].handler)
-				imap->cb[mbit].handler(mbit,
-					imap->cb[mbit].data);
-			spin_unlock(&imap->lock);
+			airq_iv_lock(aibv, ai);
+			generic_handle_irq(airq_iv_get_data(aibv, ai));
+			airq_iv_unlock(aibv, ai);
 		}
 	}
-
-	if (rescan)
-		goto out;
-
-	/* scan the skipped bits */
-	if (start > 0) {
-		sbit = 0;
-		max = start;
-		start = 0;
-		goto scan;
-	}
-
-	/* enable interrupts again */
-	set_irq_ctrl(SIC_IRQ_MODE_SINGLE, NULL, PCI_ISC);
-
-	/* check again to not lose initiative */
-	rmb();
-	max = aisb_max;
-	sbit = find_first_bit_left(bucket->aisb, max);
-	if (sbit != max) {
-		rescan++;
-		goto scan;
-	}
-out:
-	/* store next device bit to scan */
-	__get_cpu_var(next_sbit) = (++last >= aisb_max) ? 0 : last;
 }
 
-/* msi_vecs - number of requested interrupts, 0 place function to error state */
-static int zpci_setup_msi(struct pci_dev *pdev, int msi_vecs)
+int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 {
 	struct zpci_dev *zdev = get_zdev(pdev);
-	unsigned int aisb, msi_nr;
+	unsigned int hwirq, irq, msi_vecs;
+	unsigned long aisb;
 	struct msi_desc *msi;
+	struct msi_msg msg;
 	int rc;
 
-	/* store the number of used MSI vectors */
-	zdev->irq_map->msi_vecs = min(msi_vecs, ZPCI_NR_MSI_VECS);
-
-	spin_lock(&bucket->lock);
-	aisb = find_first_zero_bit(bucket->alloc, PAGE_SIZE);
-	/* alloc map exhausted? */
-	if (aisb == PAGE_SIZE) {
-		spin_unlock(&bucket->lock);
-		return -EIO;
-	}
-	set_bit(aisb, bucket->alloc);
-	spin_unlock(&bucket->lock);
+	if (type != PCI_CAP_ID_MSIX && type != PCI_CAP_ID_MSI)
+		return -EINVAL;
+	msi_vecs = min(nvec, ZPCI_MSI_VEC_MAX);
+	msi_vecs = min_t(unsigned int, msi_vecs, CONFIG_PCI_NR_MSI);
 
+	/* Allocate adapter summary indicator bit */
+	rc = -EIO;
+	aisb = airq_iv_alloc_bit(zpci_aisb_iv);
+	if (aisb == -1UL)
+		goto out;
 	zdev->aisb = aisb;
-	if (aisb + 1 > aisb_max)
-		aisb_max = aisb + 1;
 
-	/* wire up IRQ shortcut pointer */
-	bucket->imap[zdev->aisb] = zdev->irq_map;
-	pr_debug("%s: imap[%u] linked to %p\n", __func__, zdev->aisb, zdev->irq_map);
+	/* Create adapter interrupt vector */
+	rc = -ENOMEM;
+	zdev->aibv = airq_iv_create(msi_vecs, AIRQ_IV_DATA | AIRQ_IV_BITLOCK);
+	if (!zdev->aibv)
+		goto out_si;
 
-	/* TODO: irq number 0 wont be found if we return less than requested MSIs.
-	 * ignore it for now and fix in common code.
-	 */
-	msi_nr = aisb << ZPCI_MSI_VEC_BITS;
+	/* Wire up shortcut pointer */
+	zpci_aibv[aisb] = zdev->aibv;
 
+	/* Request MSI interrupts */
+	hwirq = 0;
 	list_for_each_entry(msi, &pdev->msi_list, list) {
-		rc = zpci_setup_msi_irq(zdev, msi, msi_nr,
-					  aisb << ZPCI_MSI_VEC_BITS);
+		rc = -EIO;
+		irq = irq_alloc_desc(0);	/* Alloc irq on node 0 */
+		if (irq == NO_IRQ)
+			goto out_msi;
+		rc = irq_set_msi_desc(irq, msi);
 		if (rc)
-			return rc;
-		msi_nr++;
+			goto out_msi;
+		irq_set_chip_and_handler(irq, &zpci_irq_chip,
+					 handle_simple_irq);
+		msg.data = hwirq;
+		msg.address_lo = zdev->msi_addr & 0xffffffff;
+		msg.address_hi = zdev->msi_addr >> 32;
+		write_msi_msg(irq, &msg);
+		airq_iv_set_data(zdev->aibv, hwirq, irq);
+		hwirq++;
 	}
 
-	rc = zpci_register_airq(zdev, aisb, (u64) &zdev->irq_map->aibv);
-	if (rc) {
-		clear_bit(aisb, bucket->alloc);
-		dev_err(&pdev->dev, "register MSI failed with: %d\n", rc);
-		return rc;
+	/* Enable adapter interrupts */
+	rc = zpci_set_airq(zdev);
+	if (rc)
+		goto out_msi;
+
+	return (msi_vecs == nvec) ? 0 : msi_vecs;
+
+out_msi:
+	list_for_each_entry(msi, &pdev->msi_list, list) {
+		if (hwirq-- == 0)
+			break;
+		irq_set_msi_desc(msi->irq, NULL);
+		irq_free_desc(msi->irq);
+		msi->msg.address_lo = 0;
+		msi->msg.address_hi = 0;
+		msi->msg.data = 0;
+		msi->irq = 0;
 	}
-	return (zdev->irq_map->msi_vecs == msi_vecs) ?
-		0 : zdev->irq_map->msi_vecs;
+	zpci_aibv[aisb] = NULL;
+	airq_iv_release(zdev->aibv);
+out_si:
+	airq_iv_free_bit(zpci_aisb_iv, aisb);
+out:
+	return rc;
 }
 
-static void zpci_teardown_msi(struct pci_dev *pdev)
+void arch_teardown_msi_irqs(struct pci_dev *pdev)
 {
 	struct zpci_dev *zdev = get_zdev(pdev);
 	struct msi_desc *msi;
-	int aisb, rc;
+	int rc;
 
-	rc = zpci_unregister_airq(zdev);
-	if (rc) {
-		dev_err(&pdev->dev, "deregister MSI failed with: %d\n", rc);
+	/* Disable adapter interrupts */
+	rc = zpci_clear_airq(zdev);
+	if (rc)
 		return;
-	}
-
-	msi = list_first_entry(&pdev->msi_list, struct msi_desc, list);
-	aisb = irq_to_dev_nr(msi->irq);
 
-	list_for_each_entry(msi, &pdev->msi_list, list)
-		zpci_teardown_msi_irq(zdev, msi);
-
-	clear_bit(aisb, bucket->alloc);
-	if (aisb + 1 == aisb_max)
-		aisb_max--;
-}
-
-int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
-{
-	pr_debug("%s: requesting %d MSI-X interrupts...", __func__, nvec);
-	if (type != PCI_CAP_ID_MSIX && type != PCI_CAP_ID_MSI)
-		return -EINVAL;
-	return zpci_setup_msi(pdev, nvec);
-}
+	/* Release MSI interrupts */
+	list_for_each_entry(msi, &pdev->msi_list, list) {
+		zpci_msi_set_mask_bits(msi, 1, 1);
+		irq_set_msi_desc(msi->irq, NULL);
+		irq_free_desc(msi->irq);
+		msi->msg.address_lo = 0;
+		msi->msg.address_hi = 0;
+		msi->msg.data = 0;
+		msi->irq = 0;
+	}
 
-void arch_teardown_msi_irqs(struct pci_dev *pdev)
-{
-	pr_info("%s: on pdev: %p\n", __func__, pdev);
-	zpci_teardown_msi(pdev);
+	zpci_aibv[zdev->aisb] = NULL;
+	airq_iv_release(zdev->aibv);
+	airq_iv_free_bit(zpci_aisb_iv, zdev->aisb);
 }
 
 static void zpci_map_resources(struct zpci_dev *zdev)
@@ -564,8 +513,6 @@ static void zpci_map_resources(struct zpci_dev *zdev)
 			continue;
 		pdev->resource[i].start = (resource_size_t) pci_iomap(pdev, i, 0);
 		pdev->resource[i].end = pdev->resource[i].start + len - 1;
-		pr_debug("BAR%i: -> start: %Lx  end: %Lx\n",
-			i, pdev->resource[i].start, pdev->resource[i].end);
 	}
 }
 
@@ -589,162 +536,47 @@ struct zpci_dev *zpci_alloc_device(void)
 
 	/* Alloc memory for our private pci device data */
 	zdev = kzalloc(sizeof(*zdev), GFP_KERNEL);
-	if (!zdev)
-		return ERR_PTR(-ENOMEM);
-
-	/* Alloc aibv & callback space */
-	zdev->irq_map = kmem_cache_zalloc(zdev_irq_cache, GFP_KERNEL);
-	if (!zdev->irq_map)
-		goto error;
-	WARN_ON((u64) zdev->irq_map & 0xff);
-	return zdev;
-
-error:
-	kfree(zdev);
-	return ERR_PTR(-ENOMEM);
+	return zdev ? : ERR_PTR(-ENOMEM);
 }
 
 void zpci_free_device(struct zpci_dev *zdev)
 {
-	kmem_cache_free(zdev_irq_cache, zdev->irq_map);
 	kfree(zdev);
 }
 
-/*
- * Too late for any s390 specific setup, since interrupts must be set up
- * already which requires DMA setup too and the pci scan will access the
- * config space, which only works if the function handle is enabled.
- */
-int pcibios_enable_device(struct pci_dev *pdev, int mask)
-{
-	struct resource *res;
-	u16 cmd;
-	int i;
-
-	pci_read_config_word(pdev, PCI_COMMAND, &cmd);
-
-	for (i = 0; i < PCI_BAR_COUNT; i++) {
-		res = &pdev->resource[i];
-
-		if (res->flags & IORESOURCE_IO)
-			return -EINVAL;
-
-		if (res->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	pci_write_config_word(pdev, PCI_COMMAND, cmd);
-	return 0;
-}
-
 int pcibios_add_platform_entries(struct pci_dev *pdev)
 {
 	return zpci_sysfs_add_device(&pdev->dev);
 }
 
-int zpci_request_irq(unsigned int irq, irq_handler_t handler, void *data)
-{
-	int msi_nr = irq_to_msi_nr(irq);
-	struct zdev_irq_map *imap;
-	struct msi_desc *msi;
-
-	msi = irq_get_msi_desc(irq);
-	if (!msi)
-		return -EIO;
-
-	imap = get_imap(irq);
-	spin_lock_init(&imap->lock);
-
-	pr_debug("%s: register handler for IRQ:MSI %d:%d\n", __func__, irq >> 6, msi_nr);
-	imap->cb[msi_nr].handler = handler;
-	imap->cb[msi_nr].data = data;
-
-	/*
-	 * The generic MSI code returns with the interrupt disabled on the
-	 * card, using the MSI mask bits. Firmware doesn't appear to unmask
-	 * at that level, so we do it here by hand.
-	 */
-	zpci_msi_set_mask_bits(msi, 1, 0);
-	return 0;
-}
-
-void zpci_free_irq(unsigned int irq)
-{
-	struct zdev_irq_map *imap = get_imap(irq);
-	int msi_nr = irq_to_msi_nr(irq);
-	unsigned long flags;
-
-	pr_debug("%s: for irq: %d\n", __func__, irq);
-
-	spin_lock_irqsave(&imap->lock, flags);
-	imap->cb[msi_nr].handler = NULL;
-	imap->cb[msi_nr].data = NULL;
-	spin_unlock_irqrestore(&imap->lock, flags);
-}
-
-int request_irq(unsigned int irq, irq_handler_t handler,
-		unsigned long irqflags, const char *devname, void *dev_id)
-{
-	pr_debug("%s: irq: %d  handler: %p  flags: %lx  dev: %s\n",
-		__func__, irq, handler, irqflags, devname);
-
-	return zpci_request_irq(irq, handler, dev_id);
-}
-EXPORT_SYMBOL_GPL(request_irq);
-
-void free_irq(unsigned int irq, void *dev_id)
-{
-	zpci_free_irq(irq);
-}
-EXPORT_SYMBOL_GPL(free_irq);
-
 static int __init zpci_irq_init(void)
 {
-	int cpu, rc;
-
-	bucket = kzalloc(sizeof(*bucket), GFP_KERNEL);
-	if (!bucket)
-		return -ENOMEM;
-
-	bucket->aisb = (unsigned long *) get_zeroed_page(GFP_KERNEL);
-	if (!bucket->aisb) {
-		rc = -ENOMEM;
-		goto out_aisb;
-	}
-
-	bucket->alloc = (unsigned long *) get_zeroed_page(GFP_KERNEL);
-	if (!bucket->alloc) {
-		rc = -ENOMEM;
-		goto out_alloc;
-	}
+	int rc;
 
 	rc = register_adapter_interrupt(&zpci_airq);
 	if (rc)
-		goto out_ai;
+		goto out;
 	/* Set summary to 1 to be called every time for the ISC. */
 	*zpci_airq.lsi_ptr = 1;
 
-	for_each_online_cpu(cpu)
-		per_cpu(next_sbit, cpu) = 0;
+	rc = -ENOMEM;
+	zpci_aisb_iv = airq_iv_create(ZPCI_NR_DEVICES, AIRQ_IV_ALLOC);
+	if (!zpci_aisb_iv)
+		goto out_airq;
 
-	spin_lock_init(&bucket->lock);
-	set_irq_ctrl(SIC_IRQ_MODE_SINGLE, NULL, PCI_ISC);
+	zpci_set_irq_ctrl(SIC_IRQ_MODE_SINGLE, NULL, PCI_ISC);
 	return 0;
 
-out_ai:
-	free_page((unsigned long) bucket->alloc);
-out_alloc:
-	free_page((unsigned long) bucket->aisb);
-out_aisb:
-	kfree(bucket);
+out_airq:
+	unregister_adapter_interrupt(&zpci_airq);
+out:
 	return rc;
 }
 
 static void zpci_irq_exit(void)
 {
-	free_page((unsigned long) bucket->alloc);
-	free_page((unsigned long) bucket->aisb);
+	airq_iv_release(zpci_aisb_iv);
 	unregister_adapter_interrupt(&zpci_airq);
-	kfree(bucket);
 }
 
 static struct resource *zpci_alloc_bus_resource(unsigned long start, unsigned long size,
@@ -770,8 +602,11 @@ static struct resource *zpci_alloc_bus_resource(unsigned long start, unsigned lo
 	r->name = name;
 
 	rc = request_resource(&iomem_resource, r);
-	if (rc)
-		pr_debug("request resource %pR failed\n", r);
+	if (rc) {
+		kfree(r->name);
+		kfree(r);
+		return ERR_PTR(-ENOMEM);
+	}
 	return r;
 }
 
@@ -801,16 +636,49 @@ static void zpci_free_iomap(struct zpci_dev *zdev, int entry)
 int pcibios_add_device(struct pci_dev *pdev)
 {
 	struct zpci_dev *zdev = get_zdev(pdev);
+	struct resource *res;
+	int i;
+
+	zdev->pdev = pdev;
+	zpci_map_resources(zdev);
+
+	for (i = 0; i < PCI_BAR_COUNT; i++) {
+		res = &pdev->resource[i];
+		if (res->parent || !res->flags)
+			continue;
+		pci_claim_resource(pdev, i);
+	}
+
+	return 0;
+}
+
+int pcibios_enable_device(struct pci_dev *pdev, int mask)
+{
+	struct zpci_dev *zdev = get_zdev(pdev);
+	struct resource *res;
+	u16 cmd;
+	int i;
 
 	zdev->pdev = pdev;
 	zpci_debug_init_device(zdev);
 	zpci_fmb_enable_device(zdev);
 	zpci_map_resources(zdev);
 
+	pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+	for (i = 0; i < PCI_BAR_COUNT; i++) {
+		res = &pdev->resource[i];
+
+		if (res->flags & IORESOURCE_IO)
+			return -EINVAL;
+
+		if (res->flags & IORESOURCE_MEM)
+			cmd |= PCI_COMMAND_MEMORY;
+	}
+	pci_write_config_word(pdev, PCI_COMMAND, cmd);
 	return 0;
 }
 
-void pcibios_release_device(struct pci_dev *pdev)
+void pcibios_disable_device(struct pci_dev *pdev)
 {
 	struct zpci_dev *zdev = get_zdev(pdev);
 
@@ -820,6 +688,47 @@ void pcibios_release_device(struct pci_dev *pdev)
 	zdev->pdev = NULL;
 }
 
+#ifdef CONFIG_HIBERNATE_CALLBACKS
+static int zpci_restore(struct device *dev)
+{
+	struct zpci_dev *zdev = get_zdev(to_pci_dev(dev));
+	int ret = 0;
+
+	if (zdev->state != ZPCI_FN_STATE_ONLINE)
+		goto out;
+
+	ret = clp_enable_fh(zdev, ZPCI_NR_DMA_SPACES);
+	if (ret)
+		goto out;
+
+	zpci_map_resources(zdev);
+	zpci_register_ioat(zdev, 0, zdev->start_dma + PAGE_OFFSET,
+			   zdev->start_dma + zdev->iommu_size - 1,
+			   (u64) zdev->dma_table);
+
+out:
+	return ret;
+}
+
+static int zpci_freeze(struct device *dev)
+{
+	struct zpci_dev *zdev = get_zdev(to_pci_dev(dev));
+
+	if (zdev->state != ZPCI_FN_STATE_ONLINE)
+		return 0;
+
+	zpci_unregister_ioat(zdev, 0);
+	return clp_disable_fh(zdev);
+}
+
+struct dev_pm_ops pcibios_pm_ops = {
+	.thaw_noirq = zpci_restore,
+	.freeze_noirq = zpci_freeze,
+	.restore_noirq = zpci_restore,
+	.poweroff_noirq = zpci_freeze,
+};
+#endif /* CONFIG_HIBERNATE_CALLBACKS */
+
 static int zpci_scan_bus(struct zpci_dev *zdev)
 {
 	struct resource *res;
@@ -893,11 +802,12 @@ int zpci_enable_device(struct zpci_dev *zdev)
 	rc = clp_enable_fh(zdev, ZPCI_NR_DMA_SPACES);
 	if (rc)
 		goto out;
-	pr_info("Enabled fh: 0x%x fid: 0x%x\n", zdev->fh, zdev->fid);
 
 	rc = zpci_dma_init_device(zdev);
 	if (rc)
 		goto out_dma;
+
+	zdev->state = ZPCI_FN_STATE_ONLINE;
 	return 0;
 
 out_dma:
@@ -926,18 +836,16 @@ int zpci_create_device(struct zpci_dev *zdev)
 		rc = zpci_enable_device(zdev);
 		if (rc)
 			goto out_free;
-
-		zdev->state = ZPCI_FN_STATE_ONLINE;
 	}
 	rc = zpci_scan_bus(zdev);
 	if (rc)
 		goto out_disable;
 
-	mutex_lock(&zpci_list_lock);
+	spin_lock(&zpci_list_lock);
 	list_add_tail(&zdev->entry, &zpci_list);
-	if (hotplug_ops)
-		hotplug_ops->create_slot(zdev);
-	mutex_unlock(&zpci_list_lock);
+	spin_unlock(&zpci_list_lock);
+
+	zpci_init_slot(zdev);
 
 	return 0;
 
@@ -967,15 +875,10 @@ static inline int barsize(u8 size)
 
 static int zpci_mem_init(void)
 {
-	zdev_irq_cache = kmem_cache_create("PCI_IRQ_cache", sizeof(struct zdev_irq_map),
-				L1_CACHE_BYTES, SLAB_HWCACHE_ALIGN, NULL);
-	if (!zdev_irq_cache)
-		goto error_zdev;
-
 	zdev_fmb_cache = kmem_cache_create("PCI_FMB_cache", sizeof(struct zpci_fmb),
 				16, 0, NULL);
 	if (!zdev_fmb_cache)
-		goto error_fmb;
+		goto error_zdev;
 
 	/* TODO: use realloc */
 	zpci_iomap_start = kzalloc(ZPCI_IOMAP_MAX_ENTRIES * sizeof(*zpci_iomap_start),
@@ -986,8 +889,6 @@ static int zpci_mem_init(void)
 
 error_iomap:
 	kmem_cache_destroy(zdev_fmb_cache);
-error_fmb:
-	kmem_cache_destroy(zdev_irq_cache);
 error_zdev:
 	return -ENOMEM;
 }
@@ -995,28 +896,10 @@ error_zdev:
 static void zpci_mem_exit(void)
 {
 	kfree(zpci_iomap_start);
-	kmem_cache_destroy(zdev_irq_cache);
 	kmem_cache_destroy(zdev_fmb_cache);
 }
 
-void zpci_register_hp_ops(struct pci_hp_callback_ops *ops)
-{
-	mutex_lock(&zpci_list_lock);
-	hotplug_ops = ops;
-	mutex_unlock(&zpci_list_lock);
-}
-EXPORT_SYMBOL_GPL(zpci_register_hp_ops);
-
-void zpci_deregister_hp_ops(void)
-{
-	mutex_lock(&zpci_list_lock);
-	hotplug_ops = NULL;
-	mutex_unlock(&zpci_list_lock);
-}
-EXPORT_SYMBOL_GPL(zpci_deregister_hp_ops);
-
-unsigned int s390_pci_probe;
-EXPORT_SYMBOL_GPL(s390_pci_probe);
+static unsigned int s390_pci_probe;
 
 char * __init pcibios_setup(char *str)
 {
@@ -1038,22 +921,14 @@ static int __init pci_base_init(void)
 	    || !test_facility(71) || !test_facility(72))
 		return 0;
 
-	pr_info("Probing PCI hardware: PCI:%d  SID:%d  AEN:%d\n",
-		test_facility(69), test_facility(70),
-		test_facility(71));
-
 	rc = zpci_debug_init();
 	if (rc)
-		return rc;
+		goto out;
 
 	rc = zpci_mem_init();
 	if (rc)
 		goto out_mem;
 
-	rc = zpci_msihash_init();
-	if (rc)
-		goto out_hash;
-
 	rc = zpci_irq_init();
 	if (rc)
 		goto out_irq;
@@ -1062,7 +937,7 @@ static int __init pci_base_init(void)
 	if (rc)
 		goto out_dma;
 
-	rc = clp_find_pci_devices();
+	rc = clp_scan_pci_devices();
 	if (rc)
 		goto out_find;
 
@@ -1073,11 +948,15 @@ out_find:
 out_dma:
 	zpci_irq_exit();
 out_irq:
-	zpci_msihash_exit();
-out_hash:
 	zpci_mem_exit();
 out_mem:
 	zpci_debug_exit();
+out:
 	return rc;
 }
-subsys_initcall(pci_base_init);
+subsys_initcall_sync(pci_base_init);
+
+void zpci_rescan(void)
+{
+	clp_rescan_pci_devices_simple();
+}
diff --git a/arch/s390/pci/pci_clp.c b/arch/s390/pci/pci_clp.c
index 2e95396..8414798 100644
--- a/arch/s390/pci/pci_clp.c
+++ b/arch/s390/pci/pci_clp.c
@@ -16,6 +16,16 @@
 #include <asm/pci_debug.h>
 #include <asm/pci_clp.h>
 
+static inline void zpci_err_clp(unsigned int rsp, int rc)
+{
+	struct {
+		unsigned int rsp;
+		int rc;
+	} __packed data = {rsp, rc};
+
+	zpci_err_hex(&data, sizeof(data));
+}
+
 /*
  * Call Logical Processor
  * Retry logic is handled by the caller.
@@ -36,9 +46,9 @@ static inline u8 clp_instr(void *data)
 	return cc;
 }
 
-static void *clp_alloc_block(void)
+static void *clp_alloc_block(gfp_t gfp_mask)
 {
-	return (void *) __get_free_pages(GFP_KERNEL, get_order(CLP_BLK_SIZE));
+	return (void *) __get_free_pages(gfp_mask, get_order(CLP_BLK_SIZE));
 }
 
 static void clp_free_block(void *ptr)
@@ -54,7 +64,6 @@ static void clp_store_query_pci_fngrp(struct zpci_dev *zdev,
 	zdev->msi_addr = response->msia;
 	zdev->fmb_update = response->mui;
 
-	pr_debug("Supported number of MSI vectors: %u\n", response->noi);
 	switch (response->version) {
 	case 1:
 		zdev->max_bus_speed = PCIE_SPEED_5_0GT;
@@ -70,7 +79,7 @@ static int clp_query_pci_fngrp(struct zpci_dev *zdev, u8 pfgid)
 	struct clp_req_rsp_query_pci_grp *rrb;
 	int rc;
 
-	rrb = clp_alloc_block();
+	rrb = clp_alloc_block(GFP_KERNEL);
 	if (!rrb)
 		return -ENOMEM;
 
@@ -84,8 +93,8 @@ static int clp_query_pci_fngrp(struct zpci_dev *zdev, u8 pfgid)
 	if (!rc && rrb->response.hdr.rsp == CLP_RC_OK)
 		clp_store_query_pci_fngrp(zdev, &rrb->response);
 	else {
-		pr_err("Query PCI FNGRP failed with response: %x  cc: %d\n",
-			rrb->response.hdr.rsp, rc);
+		zpci_err("Q PCI FGRP:\n");
+		zpci_err_clp(rrb->response.hdr.rsp, rc);
 		rc = -EIO;
 	}
 	clp_free_block(rrb);
@@ -113,7 +122,7 @@ static int clp_query_pci_fn(struct zpci_dev *zdev, u32 fh)
 	struct clp_req_rsp_query_pci *rrb;
 	int rc;
 
-	rrb = clp_alloc_block();
+	rrb = clp_alloc_block(GFP_KERNEL);
 	if (!rrb)
 		return -ENOMEM;
 
@@ -131,8 +140,8 @@ static int clp_query_pci_fn(struct zpci_dev *zdev, u32 fh)
 		if (rrb->response.pfgid)
 			rc = clp_query_pci_fngrp(zdev, rrb->response.pfgid);
 	} else {
-		pr_err("Query PCI failed with response: %x  cc: %d\n",
-			 rrb->response.hdr.rsp, rc);
+		zpci_err("Q PCI FN:\n");
+		zpci_err_clp(rrb->response.hdr.rsp, rc);
 		rc = -EIO;
 	}
 out:
@@ -179,9 +188,9 @@ error:
 static int clp_set_pci_fn(u32 *fh, u8 nr_dma_as, u8 command)
 {
 	struct clp_req_rsp_set_pci *rrb;
-	int rc, retries = 1000;
+	int rc, retries = 100;
 
-	rrb = clp_alloc_block();
+	rrb = clp_alloc_block(GFP_KERNEL);
 	if (!rrb)
 		return -ENOMEM;
 
@@ -199,15 +208,15 @@ static int clp_set_pci_fn(u32 *fh, u8 nr_dma_as, u8 command)
 			retries--;
 			if (retries < 0)
 				break;
-			msleep(1);
+			msleep(20);
 		}
 	} while (rrb->response.hdr.rsp == CLP_RC_SETPCIFN_BUSY);
 
 	if (!rc && rrb->response.hdr.rsp == CLP_RC_OK)
 		*fh = rrb->response.fh;
 	else {
-		zpci_dbg(0, "SPF fh:%x, cc:%d, resp:%x\n", *fh, rc,
-			 rrb->response.hdr.rsp);
+		zpci_err("Set PCI FN:\n");
+		zpci_err_clp(rrb->response.hdr.rsp, rc);
 		rc = -EIO;
 	}
 	clp_free_block(rrb);
@@ -245,83 +254,129 @@ int clp_disable_fh(struct zpci_dev *zdev)
 	return rc;
 }
 
-static void clp_check_pcifn_entry(struct clp_fh_list_entry *entry)
+static int clp_list_pci(struct clp_req_rsp_list_pci *rrb,
+			void (*cb)(struct clp_fh_list_entry *entry))
 {
-	int present, rc;
+	u64 resume_token = 0;
+	int entries, i, rc;
+
+	do {
+		memset(rrb, 0, sizeof(*rrb));
+		rrb->request.hdr.len = sizeof(rrb->request);
+		rrb->request.hdr.cmd = CLP_LIST_PCI;
+		/* store as many entries as possible */
+		rrb->response.hdr.len = CLP_BLK_SIZE - LIST_PCI_HDR_LEN;
+		rrb->request.resume_token = resume_token;
+
+		/* Get PCI function handle list */
+		rc = clp_instr(rrb);
+		if (rc || rrb->response.hdr.rsp != CLP_RC_OK) {
+			zpci_err("List PCI FN:\n");
+			zpci_err_clp(rrb->response.hdr.rsp, rc);
+			rc = -EIO;
+			goto out;
+		}
+
+		WARN_ON_ONCE(rrb->response.entry_size !=
+			sizeof(struct clp_fh_list_entry));
 
+		entries = (rrb->response.hdr.len - LIST_PCI_HDR_LEN) /
+			rrb->response.entry_size;
+
+		resume_token = rrb->response.resume_token;
+		for (i = 0; i < entries; i++)
+			cb(&rrb->response.fh_list[i]);
+	} while (resume_token);
+out:
+	return rc;
+}
+
+static void __clp_add(struct clp_fh_list_entry *entry)
+{
 	if (!entry->vendor_id)
 		return;
 
-	/* TODO: be a little bit more scalable */
-	present = zpci_fid_present(entry->fid);
+	clp_add_pci_device(entry->fid, entry->fh, entry->config_state);
+}
+
+static void __clp_rescan(struct clp_fh_list_entry *entry)
+{
+	struct zpci_dev *zdev;
 
-	if (present)
-		pr_debug("%s: device %x already present\n", __func__, entry->fid);
+	if (!entry->vendor_id)
+		return;
 
-	/* skip already used functions */
-	if (present && entry->config_state)
+	zdev = get_zdev_by_fid(entry->fid);
+	if (!zdev) {
+		clp_add_pci_device(entry->fid, entry->fh, entry->config_state);
 		return;
+	}
 
-	/* aev 306: function moved to stand-by state */
-	if (present && !entry->config_state) {
+	if (!entry->config_state) {
 		/*
 		 * The handle is already disabled, that means no iota/irq freeing via
 		 * the firmware interfaces anymore. Need to free resources manually
 		 * (DMA memory, debug, sysfs)...
 		 */
-		zpci_stop_device(get_zdev_by_fid(entry->fid));
-		return;
+		zpci_stop_device(zdev);
 	}
+}
 
-	rc = clp_add_pci_device(entry->fid, entry->fh, entry->config_state);
-	if (rc)
-		pr_err("Failed to add fid: 0x%x\n", entry->fid);
+static void __clp_update(struct clp_fh_list_entry *entry)
+{
+	struct zpci_dev *zdev;
+
+	if (!entry->vendor_id)
+		return;
+
+	zdev = get_zdev_by_fid(entry->fid);
+	if (!zdev)
+		return;
+
+	zdev->fh = entry->fh;
 }
 
-int clp_find_pci_devices(void)
+int clp_scan_pci_devices(void)
 {
 	struct clp_req_rsp_list_pci *rrb;
-	u64 resume_token = 0;
-	int entries, i, rc;
+	int rc;
 
-	rrb = clp_alloc_block();
+	rrb = clp_alloc_block(GFP_KERNEL);
 	if (!rrb)
 		return -ENOMEM;
 
-	do {
-		memset(rrb, 0, sizeof(*rrb));
-		rrb->request.hdr.len = sizeof(rrb->request);
-		rrb->request.hdr.cmd = CLP_LIST_PCI;
-		/* store as many entries as possible */
-		rrb->response.hdr.len = CLP_BLK_SIZE - LIST_PCI_HDR_LEN;
-		rrb->request.resume_token = resume_token;
+	rc = clp_list_pci(rrb, __clp_add);
 
-		/* Get PCI function handle list */
-		rc = clp_instr(rrb);
-		if (rc || rrb->response.hdr.rsp != CLP_RC_OK) {
-			pr_err("List PCI failed with response: 0x%x  cc: %d\n",
-				rrb->response.hdr.rsp, rc);
-			rc = -EIO;
-			goto out;
-		}
+	clp_free_block(rrb);
+	return rc;
+}
 
-		WARN_ON_ONCE(rrb->response.entry_size !=
-			sizeof(struct clp_fh_list_entry));
+int clp_rescan_pci_devices(void)
+{
+	struct clp_req_rsp_list_pci *rrb;
+	int rc;
 
-		entries = (rrb->response.hdr.len - LIST_PCI_HDR_LEN) /
-			rrb->response.entry_size;
-		pr_info("Detected number of PCI functions: %u\n", entries);
+	rrb = clp_alloc_block(GFP_KERNEL);
+	if (!rrb)
+		return -ENOMEM;
 
-		/* Store the returned resume token as input for the next call */
-		resume_token = rrb->response.resume_token;
+	rc = clp_list_pci(rrb, __clp_rescan);
 
-		for (i = 0; i < entries; i++)
-			clp_check_pcifn_entry(&rrb->response.fh_list[i]);
-	} while (resume_token);
+	clp_free_block(rrb);
+	return rc;
+}
+
+int clp_rescan_pci_devices_simple(void)
+{
+	struct clp_req_rsp_list_pci *rrb;
+	int rc;
+
+	rrb = clp_alloc_block(GFP_NOWAIT);
+	if (!rrb)
+		return -ENOMEM;
+
+	rc = clp_list_pci(rrb, __clp_update);
 
-	pr_debug("Maximum number of supported PCI functions: %u\n",
-		rrb->response.max_fn);
-out:
 	clp_free_block(rrb);
 	return rc;
 }
diff --git a/arch/s390/pci/pci_dma.c b/arch/s390/pci/pci_dma.c
index a2343c1..9b83d08 100644
--- a/arch/s390/pci/pci_dma.c
+++ b/arch/s390/pci/pci_dma.c
@@ -10,6 +10,7 @@
 #include <linux/export.h>
 #include <linux/iommu-helper.h>
 #include <linux/dma-mapping.h>
+#include <linux/vmalloc.h>
 #include <linux/pci.h>
 #include <asm/pci_dma.h>
 
@@ -144,10 +145,8 @@ static int dma_update_trans(struct zpci_dev *zdev, unsigned long pa,
 		return -EINVAL;
 
 	spin_lock_irqsave(&zdev->dma_table_lock, irq_flags);
-	if (!zdev->dma_table) {
-		dev_err(&zdev->pdev->dev, "Missing DMA table\n");
+	if (!zdev->dma_table)
 		goto no_refresh;
-	}
 
 	for (i = 0; i < nr_pages; i++) {
 		dma_update_cpu_trans(zdev, page_addr, dma_addr, flags);
@@ -170,8 +169,8 @@ static int dma_update_trans(struct zpci_dev *zdev, unsigned long pa,
 		 */
 		goto no_refresh;
 
-	rc = s390pci_refresh_trans((u64) zdev->fh << 32, start_dma_addr,
-				   nr_pages * PAGE_SIZE);
+	rc = zpci_refresh_trans((u64) zdev->fh << 32, start_dma_addr,
+				nr_pages * PAGE_SIZE);
 
 no_refresh:
 	spin_unlock_irqrestore(&zdev->dma_table_lock, irq_flags);
@@ -279,11 +278,8 @@ static dma_addr_t s390_dma_map_pages(struct device *dev, struct page *page,
 	size = nr_pages * PAGE_SIZE;
 
 	dma_addr = zdev->start_dma + iommu_page_index * PAGE_SIZE;
-	if (dma_addr + size > zdev->end_dma) {
-		dev_err(dev, "(dma_addr: 0x%16.16LX + size: 0x%16.16lx) > end_dma: 0x%16.16Lx\n",
-			 dma_addr, size, zdev->end_dma);
+	if (dma_addr + size > zdev->end_dma)
 		goto out_free;
-	}
 
 	if (direction == DMA_NONE || direction == DMA_TO_DEVICE)
 		flags |= ZPCI_TABLE_PROTECTED;
@@ -296,7 +292,8 @@ static dma_addr_t s390_dma_map_pages(struct device *dev, struct page *page,
 out_free:
 	dma_free_iommu(zdev, iommu_page_index, nr_pages);
 out_err:
-	dev_err(dev, "Failed to map addr: %lx\n", pa);
+	zpci_err("map error:\n");
+	zpci_err_hex(&pa, sizeof(pa));
 	return DMA_ERROR_CODE;
 }
 
@@ -311,8 +308,10 @@ static void s390_dma_unmap_pages(struct device *dev, dma_addr_t dma_addr,
 	npages = iommu_num_pages(dma_addr, size, PAGE_SIZE);
 	dma_addr = dma_addr & PAGE_MASK;
 	if (dma_update_trans(zdev, 0, dma_addr, npages * PAGE_SIZE,
-			     ZPCI_TABLE_PROTECTED | ZPCI_PTE_INVALID))
-		dev_err(dev, "Failed to unmap addr: %Lx\n", dma_addr);
+			     ZPCI_TABLE_PROTECTED | ZPCI_PTE_INVALID)) {
+		zpci_err("unmap error:\n");
+		zpci_err_hex(&dma_addr, sizeof(dma_addr));
+	}
 
 	atomic64_add(npages, (atomic64_t *) &zdev->fmb->unmapped_pages);
 	iommu_page_index = (dma_addr - zdev->start_dma) >> PAGE_SHIFT;
@@ -407,7 +406,6 @@ static void s390_dma_unmap_sg(struct device *dev, struct scatterlist *sg,
 
 int zpci_dma_init_device(struct zpci_dev *zdev)
 {
-	unsigned int bitmap_order;
 	int rc;
 
 	spin_lock_init(&zdev->iommu_bitmap_lock);
@@ -421,12 +419,7 @@ int zpci_dma_init_device(struct zpci_dev *zdev)
 
 	zdev->iommu_size = (unsigned long) high_memory - PAGE_OFFSET;
 	zdev->iommu_pages = zdev->iommu_size >> PAGE_SHIFT;
-	bitmap_order = get_order(zdev->iommu_pages / 8);
-	pr_info("iommu_size: 0x%lx  iommu_pages: 0x%lx  bitmap_order: %i\n",
-		 zdev->iommu_size, zdev->iommu_pages, bitmap_order);
-
-	zdev->iommu_bitmap = (void *) __get_free_pages(GFP_KERNEL | __GFP_ZERO,
-						       bitmap_order);
+	zdev->iommu_bitmap = vzalloc(zdev->iommu_pages / 8);
 	if (!zdev->iommu_bitmap) {
 		rc = -ENOMEM;
 		goto out_reg;
@@ -451,8 +444,7 @@ void zpci_dma_exit_device(struct zpci_dev *zdev)
 {
 	zpci_unregister_ioat(zdev, 0);
 	dma_cleanup_tables(zdev);
-	free_pages((unsigned long) zdev->iommu_bitmap,
-		   get_order(zdev->iommu_pages / 8));
+	vfree(zdev->iommu_bitmap);
 	zdev->iommu_bitmap = NULL;
 	zdev->next_bit = 0;
 }
diff --git a/arch/s390/pci/pci_event.c b/arch/s390/pci/pci_event.c
index ec62e3a..278e671 100644
--- a/arch/s390/pci/pci_event.c
+++ b/arch/s390/pci/pci_event.c
@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/pci.h>
+#include <asm/pci_debug.h>
 
 /* Content Code Description for PCI Function Error */
 struct zpci_ccdf_err {
@@ -41,25 +42,15 @@ struct zpci_ccdf_avail {
 	u16 pec;			/* PCI event code */
 } __packed;
 
-static void zpci_event_log_err(struct zpci_ccdf_err *ccdf)
-{
-	struct zpci_dev *zdev = get_zdev_by_fid(ccdf->fid);
-
-	zpci_err("SEI error CCD:\n");
-	zpci_err_hex(ccdf, sizeof(*ccdf));
-	dev_err(&zdev->pdev->dev, "event code: 0x%x\n", ccdf->pec);
-}
-
 static void zpci_event_log_avail(struct zpci_ccdf_avail *ccdf)
 {
 	struct zpci_dev *zdev = get_zdev_by_fid(ccdf->fid);
+	struct pci_dev *pdev = zdev ? zdev->pdev : NULL;
 
-	pr_err("%s%s: availability event: fh: 0x%x  fid: 0x%x  event code: 0x%x  reason:",
-		(zdev) ? dev_driver_string(&zdev->pdev->dev) : "?",
-		(zdev) ? dev_name(&zdev->pdev->dev) : "?",
-		ccdf->fh, ccdf->fid, ccdf->pec);
-	print_hex_dump(KERN_CONT, "ccdf", DUMP_PREFIX_OFFSET,
-		       16, 1, ccdf, sizeof(*ccdf), false);
+	pr_info("%s: Event 0x%x reconfigured PCI function 0x%x\n",
+		pdev ? pci_name(pdev) : "n/a", ccdf->pec, ccdf->fid);
+	zpci_err("avail CCDF:\n");
+	zpci_err_hex(ccdf, sizeof(*ccdf));
 
 	switch (ccdf->pec) {
 	case 0x0301:
@@ -69,7 +60,7 @@ static void zpci_event_log_avail(struct zpci_ccdf_avail *ccdf)
 		clp_add_pci_device(ccdf->fid, ccdf->fh, 0);
 		break;
 	case 0x0306:
-		clp_find_pci_devices();
+		clp_rescan_pci_devices();
 		break;
 	default:
 		break;
@@ -79,14 +70,16 @@ static void zpci_event_log_avail(struct zpci_ccdf_avail *ccdf)
 void zpci_event_error(void *data)
 {
 	struct zpci_ccdf_err *ccdf = data;
-	struct zpci_dev *zdev;
+	struct zpci_dev *zdev = get_zdev_by_fid(ccdf->fid);
+
+	zpci_err("error CCDF:\n");
+	zpci_err_hex(ccdf, sizeof(*ccdf));
 
-	zpci_event_log_err(ccdf);
-	zdev = get_zdev_by_fid(ccdf->fid);
-	if (!zdev) {
-		pr_err("Error event for unknown fid: %x", ccdf->fid);
+	if (!zdev)
 		return;
-	}
+
+	pr_err("%s: Event 0x%x reports an error for PCI function 0x%x\n",
+	       pci_name(zdev->pdev), ccdf->pec, ccdf->fid);
 }
 
 void zpci_event_availability(void *data)
diff --git a/arch/s390/pci/pci_insn.c b/arch/s390/pci/pci_insn.c
index 22eeb9d..85267c0 100644
--- a/arch/s390/pci/pci_insn.c
+++ b/arch/s390/pci/pci_insn.c
@@ -27,7 +27,7 @@ static inline u8 __mpcifc(u64 req, struct zpci_fib *fib, u8 *status)
 	return cc;
 }
 
-int s390pci_mod_fc(u64 req, struct zpci_fib *fib)
+int zpci_mod_fc(u64 req, struct zpci_fib *fib)
 {
 	u8 cc, status;
 
@@ -61,7 +61,7 @@ static inline u8 __rpcit(u64 fn, u64 addr, u64 range, u8 *status)
 	return cc;
 }
 
-int s390pci_refresh_trans(u64 fn, u64 addr, u64 range)
+int zpci_refresh_trans(u64 fn, u64 addr, u64 range)
 {
 	u8 cc, status;
 
@@ -78,7 +78,7 @@ int s390pci_refresh_trans(u64 fn, u64 addr, u64 range)
 }
 
 /* Set Interruption Controls */
-void set_irq_ctrl(u16 ctl, char *unused, u8 isc)
+void zpci_set_irq_ctrl(u16 ctl, char *unused, u8 isc)
 {
 	asm volatile (
 		"	.insn	rsy,0xeb00000000d1,%[ctl],%[isc],%[u]\n"
@@ -109,7 +109,7 @@ static inline int __pcilg(u64 *data, u64 req, u64 offset, u8 *status)
 	return cc;
 }
 
-int s390pci_load(u64 *data, u64 req, u64 offset)
+int zpci_load(u64 *data, u64 req, u64 offset)
 {
 	u8 status;
 	int cc;
@@ -125,7 +125,7 @@ int s390pci_load(u64 *data, u64 req, u64 offset)
 			    __func__, cc, status, req, offset);
 	return (cc > 0) ? -EIO : cc;
 }
-EXPORT_SYMBOL_GPL(s390pci_load);
+EXPORT_SYMBOL_GPL(zpci_load);
 
 /* PCI Store */
 static inline int __pcistg(u64 data, u64 req, u64 offset, u8 *status)
@@ -147,7 +147,7 @@ static inline int __pcistg(u64 data, u64 req, u64 offset, u8 *status)
 	return cc;
 }
 
-int s390pci_store(u64 data, u64 req, u64 offset)
+int zpci_store(u64 data, u64 req, u64 offset)
 {
 	u8 status;
 	int cc;
@@ -163,7 +163,7 @@ int s390pci_store(u64 data, u64 req, u64 offset)
 			__func__, cc, status, req, offset);
 	return (cc > 0) ? -EIO : cc;
 }
-EXPORT_SYMBOL_GPL(s390pci_store);
+EXPORT_SYMBOL_GPL(zpci_store);
 
 /* PCI Store Block */
 static inline int __pcistb(const u64 *data, u64 req, u64 offset, u8 *status)
@@ -183,7 +183,7 @@ static inline int __pcistb(const u64 *data, u64 req, u64 offset, u8 *status)
 	return cc;
 }
 
-int s390pci_store_block(const u64 *data, u64 req, u64 offset)
+int zpci_store_block(const u64 *data, u64 req, u64 offset)
 {
 	u8 status;
 	int cc;
@@ -199,4 +199,4 @@ int s390pci_store_block(const u64 *data, u64 req, u64 offset)
 			    __func__, cc, status, req, offset);
 	return (cc > 0) ? -EIO : cc;
 }
-EXPORT_SYMBOL_GPL(s390pci_store_block);
+EXPORT_SYMBOL_GPL(zpci_store_block);
diff --git a/arch/s390/pci/pci_msi.c b/arch/s390/pci/pci_msi.c
deleted file mode 100644
index b097aed..0000000
--- a/arch/s390/pci/pci_msi.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * Copyright IBM Corp. 2012
- *
- * Author(s):
- *   Jan Glauber <jang@linux.vnet.ibm.com>
- */
-
-#define COMPONENT "zPCI"
-#define pr_fmt(fmt) COMPONENT ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/rculist.h>
-#include <linux/hash.h>
-#include <linux/pci.h>
-#include <linux/msi.h>
-#include <asm/hw_irq.h>
-
-/* mapping of irq numbers to msi_desc */
-static struct hlist_head *msi_hash;
-static const unsigned int msi_hash_bits = 8;
-#define MSI_HASH_BUCKETS (1U << msi_hash_bits)
-#define msi_hashfn(nr)	hash_long(nr, msi_hash_bits)
-
-static DEFINE_SPINLOCK(msi_map_lock);
-
-struct msi_desc *__irq_get_msi_desc(unsigned int irq)
-{
-	struct msi_map *map;
-
-	hlist_for_each_entry_rcu(map,
-			&msi_hash[msi_hashfn(irq)], msi_chain)
-		if (map->irq == irq)
-			return map->msi;
-	return NULL;
-}
-
-int zpci_msi_set_mask_bits(struct msi_desc *msi, u32 mask, u32 flag)
-{
-	if (msi->msi_attrib.is_msix) {
-		int offset = msi->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
-			PCI_MSIX_ENTRY_VECTOR_CTRL;
-		msi->masked = readl(msi->mask_base + offset);
-		writel(flag, msi->mask_base + offset);
-	} else {
-		if (msi->msi_attrib.maskbit) {
-			int pos;
-			u32 mask_bits;
-
-			pos = (long) msi->mask_base;
-			pci_read_config_dword(msi->dev, pos, &mask_bits);
-			mask_bits &= ~(mask);
-			mask_bits |= flag & mask;
-			pci_write_config_dword(msi->dev, pos, mask_bits);
-		} else {
-			return 0;
-		}
-	}
-
-	msi->msi_attrib.maskbit = !!flag;
-	return 1;
-}
-
-int zpci_setup_msi_irq(struct zpci_dev *zdev, struct msi_desc *msi,
-			unsigned int nr, int offset)
-{
-	struct msi_map *map;
-	struct msi_msg msg;
-	int rc;
-
-	map = kmalloc(sizeof(*map), GFP_KERNEL);
-	if (map == NULL)
-		return -ENOMEM;
-
-	map->irq = nr;
-	map->msi = msi;
-	zdev->msi_map[nr & ZPCI_MSI_MASK] = map;
-	INIT_HLIST_NODE(&map->msi_chain);
-
-	pr_debug("%s hashing irq: %u  to bucket nr: %llu\n",
-		__func__, nr, msi_hashfn(nr));
-	hlist_add_head_rcu(&map->msi_chain, &msi_hash[msi_hashfn(nr)]);
-
-	spin_lock(&msi_map_lock);
-	rc = irq_set_msi_desc(nr, msi);
-	if (rc) {
-		spin_unlock(&msi_map_lock);
-		hlist_del_rcu(&map->msi_chain);
-		kfree(map);
-		zdev->msi_map[nr & ZPCI_MSI_MASK] = NULL;
-		return rc;
-	}
-	spin_unlock(&msi_map_lock);
-
-	msg.data = nr - offset;
-	msg.address_lo = zdev->msi_addr & 0xffffffff;
-	msg.address_hi = zdev->msi_addr >> 32;
-	write_msi_msg(nr, &msg);
-	return 0;
-}
-
-void zpci_teardown_msi_irq(struct zpci_dev *zdev, struct msi_desc *msi)
-{
-	int irq = msi->irq & ZPCI_MSI_MASK;
-	struct msi_map *map;
-
-	msi->msg.address_lo = 0;
-	msi->msg.address_hi = 0;
-	msi->msg.data = 0;
-	msi->irq = 0;
-	zpci_msi_set_mask_bits(msi, 1, 1);
-
-	spin_lock(&msi_map_lock);
-	map = zdev->msi_map[irq];
-	hlist_del_rcu(&map->msi_chain);
-	kfree(map);
-	zdev->msi_map[irq] = NULL;
-	spin_unlock(&msi_map_lock);
-}
-
-/*
- * The msi hash table has 256 entries which is good for 4..20
- * devices (a typical device allocates 10 + CPUs MSI's). Maybe make
- * the hash table size adjustable later.
- */
-int __init zpci_msihash_init(void)
-{
-	unsigned int i;
-
-	msi_hash = kmalloc(MSI_HASH_BUCKETS * sizeof(*msi_hash), GFP_KERNEL);
-	if (!msi_hash)
-		return -ENOMEM;
-
-	for (i = 0; i < MSI_HASH_BUCKETS; i++)
-		INIT_HLIST_HEAD(&msi_hash[i]);
-	return 0;
-}
-
-void __init zpci_msihash_exit(void)
-{
-	kfree(msi_hash);
-}
diff --git a/arch/s390/pci/pci_sysfs.c b/arch/s390/pci/pci_sysfs.c
index e99a255..cf8a12f 100644
--- a/arch/s390/pci/pci_sysfs.c
+++ b/arch/s390/pci/pci_sysfs.c
@@ -48,11 +48,38 @@ static ssize_t show_pfgid(struct device *dev, struct device_attribute *attr,
 }
 static DEVICE_ATTR(pfgid, S_IRUGO, show_pfgid, NULL);
 
+static void recover_callback(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct zpci_dev *zdev = get_zdev(pdev);
+	int ret;
+
+	pci_stop_and_remove_bus_device(pdev);
+	ret = zpci_disable_device(zdev);
+	if (ret)
+		return;
+
+	ret = zpci_enable_device(zdev);
+	if (ret)
+		return;
+
+	pci_rescan_bus(zdev->bus);
+}
+
+static ssize_t store_recover(struct device *dev, struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	int rc = device_schedule_callback(dev, recover_callback);
+	return rc ? rc : count;
+}
+static DEVICE_ATTR(recover, S_IWUSR, NULL, store_recover);
+
 static struct device_attribute *zpci_dev_attrs[] = {
 	&dev_attr_function_id,
 	&dev_attr_function_handle,
 	&dev_attr_pchid,
 	&dev_attr_pfgid,
+	&dev_attr_recover,
 	NULL,
 };
 
diff --git a/arch/score/Kconfig b/arch/score/Kconfig
index 5fc2375..305f7ee 100644
--- a/arch/score/Kconfig
+++ b/arch/score/Kconfig
@@ -111,3 +111,6 @@ source "security/Kconfig"
 source "crypto/Kconfig"
 
 source "lib/Kconfig"
+
+config NO_IOMEM
+       def_bool y
diff --git a/arch/score/Makefile b/arch/score/Makefile
index 974aefe..9e3e060 100644
--- a/arch/score/Makefile
+++ b/arch/score/Makefile
@@ -20,8 +20,8 @@ cflags-y += -G0 -pipe -mel -mnhwloop -D__SCOREEL__ \
 #
 KBUILD_AFLAGS += $(cflags-y)
 KBUILD_CFLAGS += $(cflags-y)
-KBUILD_AFLAGS_MODULE += -mlong-calls
-KBUILD_CFLAGS_MODULE += -mlong-calls
+KBUILD_AFLAGS_MODULE +=
+KBUILD_CFLAGS_MODULE +=
 LDFLAGS += --oformat elf32-littlescore
 LDFLAGS_vmlinux	+= -G0 -static -nostdlib
 
diff --git a/arch/score/include/asm/checksum.h b/arch/score/include/asm/checksum.h
index f909ac3..961bd64 100644
--- a/arch/score/include/asm/checksum.h
+++ b/arch/score/include/asm/checksum.h
@@ -184,48 +184,57 @@ static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
 				__wsum sum)
 {
 	__asm__ __volatile__(
-		".set\tnoreorder\t\t\t# csum_ipv6_magic\n\t"
-		".set\tnoat\n\t"
-		"addu\t%0, %5\t\t\t# proto (long in network byte order)\n\t"
-		"sltu\t$1, %0, %5\n\t"
-		"addu\t%0, $1\n\t"
-		"addu\t%0, %6\t\t\t# csum\n\t"
-		"sltu\t$1, %0, %6\n\t"
-		"lw\t%1, 0(%2)\t\t\t# four words source address\n\t"
-		"addu\t%0, $1\n\t"
-		"addu\t%0, %1\n\t"
-		"sltu\t$1, %0, %1\n\t"
-		"lw\t%1, 4(%2)\n\t"
-		"addu\t%0, $1\n\t"
-		"addu\t%0, %1\n\t"
-		"sltu\t$1, %0, %1\n\t"
-		"lw\t%1, 8(%2)\n\t"
-		"addu\t%0, $1\n\t"
-		"addu\t%0, %1\n\t"
-		"sltu\t$1, %0, %1\n\t"
-		"lw\t%1, 12(%2)\n\t"
-		"addu\t%0, $1\n\t"
-		"addu\t%0, %1\n\t"
-		"sltu\t$1, %0, %1\n\t"
-		"lw\t%1, 0(%3)\n\t"
-		"addu\t%0, $1\n\t"
-		"addu\t%0, %1\n\t"
-		"sltu\t$1, %0, %1\n\t"
-		"lw\t%1, 4(%3)\n\t"
-		"addu\t%0, $1\n\t"
-		"addu\t%0, %1\n\t"
-		"sltu\t$1, %0, %1\n\t"
-		"lw\t%1, 8(%3)\n\t"
-		"addu\t%0, $1\n\t"
-		"addu\t%0, %1\n\t"
-		"sltu\t$1, %0, %1\n\t"
-		"lw\t%1, 12(%3)\n\t"
-		"addu\t%0, $1\n\t"
-		"addu\t%0, %1\n\t"
-		"sltu\t$1, %0, %1\n\t"
-		"addu\t%0, $1\t\t\t# Add final carry\n\t"
-		".set\tnoat\n\t"
-		".set\tnoreorder"
+		".set\tvolatile\t\t\t# csum_ipv6_magic\n\t"
+		"add\t%0, %0, %5\t\t\t# proto (long in network byte order)\n\t"
+		"cmp.c\t%5, %0\n\t"
+		"bleu 1f\n\t"
+		"addi\t%0, 0x1\n\t"
+		"1:add\t%0, %0, %6\t\t\t# csum\n\t"
+		"cmp.c\t%6, %0\n\t"
+		"lw\t%1, [%2, 0]\t\t\t# four words source address\n\t"
+		"bleu 1f\n\t"
+		"addi\t%0, 0x1\n\t"
+		"1:add\t%0, %0, %1\n\t"
+		"cmp.c\t%1, %0\n\t"
+		"1:lw\t%1, [%2, 4]\n\t"
+		"bleu 1f\n\t"
+		"addi\t%0, 0x1\n\t"
+		"1:add\t%0, %0, %1\n\t"
+		"cmp.c\t%1, %0\n\t"
+		"lw\t%1, [%2,8]\n\t"
+		"bleu 1f\n\t"
+		"addi\t%0, 0x1\n\t"
+		"1:add\t%0, %0, %1\n\t"
+		"cmp.c\t%1, %0\n\t"
+		"lw\t%1, [%2, 12]\n\t"
+		"bleu 1f\n\t"
+		"addi\t%0, 0x1\n\t"
+		"1:add\t%0, %0,%1\n\t"
+		"cmp.c\t%1, %0\n\t"
+		"lw\t%1, [%3, 0]\n\t"
+		"bleu 1f\n\t"
+		"addi\t%0, 0x1\n\t"
+		"1:add\t%0, %0, %1\n\t"
+		"cmp.c\t%1, %0\n\t"
+		"lw\t%1, [%3, 4]\n\t"
+		"bleu 1f\n\t"
+		"addi\t%0, 0x1\n\t"
+		"1:add\t%0, %0, %1\n\t"
+		"cmp.c\t%1, %0\n\t"
+		"lw\t%1, [%3, 8]\n\t"
+		"bleu 1f\n\t"
+		"addi\t%0, 0x1\n\t"
+		"1:add\t%0, %0, %1\n\t"
+		"cmp.c\t%1, %0\n\t"
+		"lw\t%1, [%3, 12]\n\t"
+		"bleu 1f\n\t"
+		"addi\t%0, 0x1\n\t"
+		"1:add\t%0, %0, %1\n\t"
+		"cmp.c\t%1, %0\n\t"
+		"bleu 1f\n\t"
+		"addi\t%0, 0x1\n\t"
+		"1:\n\t"
+		".set\toptimize"
 		: "=r" (sum), "=r" (proto)
 		: "r" (saddr), "r" (daddr),
 		  "0" (htonl(len)), "1" (htonl(proto)), "r" (sum));
diff --git a/arch/score/include/asm/io.h b/arch/score/include/asm/io.h
index fbbfd71..574c8827 100644
--- a/arch/score/include/asm/io.h
+++ b/arch/score/include/asm/io.h
@@ -5,5 +5,4 @@
 
 #define virt_to_bus	virt_to_phys
 #define bus_to_virt	phys_to_virt
-
 #endif /* _ASM_SCORE_IO_H */
diff --git a/arch/score/include/asm/pgalloc.h b/arch/score/include/asm/pgalloc.h
index 059a61b..716b3fd 100644
--- a/arch/score/include/asm/pgalloc.h
+++ b/arch/score/include/asm/pgalloc.h
@@ -2,7 +2,7 @@
 #define _ASM_SCORE_PGALLOC_H
 
 #include <linux/mm.h>
-
+#include <linux/highmem.h>
 static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
 	pte_t *pte)
 {
diff --git a/arch/score/kernel/entry.S b/arch/score/kernel/entry.S
index 7234ed0..befb87d 100644
--- a/arch/score/kernel/entry.S
+++ b/arch/score/kernel/entry.S
@@ -264,7 +264,7 @@ resume_kernel:
 	disable_irq
 	lw	r8, [r28, TI_PRE_COUNT]
 	cmpz.c	r8
-	bne	r8, restore_all
+	bne	restore_all
 need_resched:
 	lw	r8, [r28, TI_FLAGS]
 	andri.c	r9, r8, _TIF_NEED_RESCHED
@@ -415,7 +415,7 @@ ENTRY(handle_sys)
 	sw	r9, [r0, PT_EPC]
 
 	cmpi.c	r27, __NR_syscalls 	# check syscall number
-	bgeu	illegal_syscall
+	bcs	illegal_syscall
 
 	slli	r8, r27, 2		# get syscall routine
 	la	r11, sys_call_table
diff --git a/arch/score/kernel/process.c b/arch/score/kernel/process.c
index f4c6d02..a1519ad3 100644
--- a/arch/score/kernel/process.c
+++ b/arch/score/kernel/process.c
@@ -78,8 +78,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	p->thread.reg0 = (unsigned long) childregs;
 	if (unlikely(p->flags & PF_KTHREAD)) {
 		memset(childregs, 0, sizeof(struct pt_regs));
-		p->thread->reg12 = usp;
-		p->thread->reg13 = arg;
+		p->thread.reg12 = usp;
+		p->thread.reg13 = arg;
 		p->thread.reg3 = (unsigned long) ret_from_kernel_thread;
 	} else {
 		*childregs = *current_pt_regs();
diff --git a/arch/score/mm/fault.c b/arch/score/mm/fault.c
index 6b18fb0..52238983 100644
--- a/arch/score/mm/fault.c
+++ b/arch/score/mm/fault.c
@@ -47,6 +47,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write,
 	struct task_struct *tsk = current;
 	struct mm_struct *mm = tsk->mm;
 	const int field = sizeof(unsigned long) * 2;
+	unsigned long flags = 0;
 	siginfo_t info;
 	int fault;
 
@@ -75,6 +76,9 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write,
 	if (in_atomic() || !mm)
 		goto bad_area_nosemaphore;
 
+	if (user_mode(regs))
+		flags |= FAULT_FLAG_USER;
+
 	down_read(&mm->mmap_sem);
 	vma = find_vma(mm, address);
 	if (!vma)
@@ -95,18 +99,18 @@ good_area:
 	if (write) {
 		if (!(vma->vm_flags & VM_WRITE))
 			goto bad_area;
+		flags |= FAULT_FLAG_WRITE;
 	} else {
 		if (!(vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC)))
 			goto bad_area;
 	}
 
-survive:
 	/*
 	* If for any reason at all we couldn't handle the fault,
 	* make sure we exit gracefully rather than endlessly redo
 	* the fault.
 	*/
-	fault = handle_mm_fault(mm, vma, address, write);
+	fault = handle_mm_fault(mm, vma, address, flags);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
@@ -167,11 +171,6 @@ no_context:
 	*/
 out_of_memory:
 	up_read(&mm->mmap_sem);
-	if (is_global_init(tsk)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
 	if (!user_mode(regs))
 		goto no_context;
 	pagefault_out_of_memory();
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 1020dd8..224f4bc 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -26,7 +26,6 @@ config SUPERH
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_REGS_AND_STACK_ACCESS_API
-	select HAVE_GENERIC_HARDIRQS
 	select MAY_HAVE_SPARSE_IRQ
 	select IRQ_FORCED_THREADING
 	select RTC_LIB
@@ -643,9 +642,9 @@ config KEXEC
 
 	  It is an ongoing process to be certain the hardware in a machine
 	  is properly shutdown, so do not be surprised if this code does not
-	  initially work for you.  It may help to enable device hotplugging
-	  support.  As of this writing the exact hardware interface is
-	  strongly in flux, so no good recommendation can be made.
+	  initially work for you.  As of this writing the exact hardware
+	  interface is strongly in flux, so no good recommendation can be
+	  made.
 
 config CRASH_DUMP
 	bool "kernel crash dumps (EXPERIMENTAL)"
diff --git a/arch/sh/boards/board-espt.c b/arch/sh/boards/board-espt.c
index 4d94dff..7291e2f 100644
--- a/arch/sh/boards/board-espt.c
+++ b/arch/sh/boards/board-espt.c
@@ -80,7 +80,6 @@ static struct resource sh_eth_resources[] = {
 static struct sh_eth_plat_data sh7763_eth_pdata = {
 	.phy = 0,
 	.edmac_endian = EDMAC_LITTLE_ENDIAN,
-	.register_type = SH_ETH_REG_GIGABIT,
 	.phy_interface = PHY_INTERFACE_MODE_MII,
 };
 
diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
index 4f114d1..25c5a93 100644
--- a/arch/sh/boards/board-sh7757lcr.c
+++ b/arch/sh/boards/board-sh7757lcr.c
@@ -77,7 +77,6 @@ static struct resource sh_eth0_resources[] = {
 static struct sh_eth_plat_data sh7757_eth0_pdata = {
 	.phy = 1,
 	.edmac_endian = EDMAC_LITTLE_ENDIAN,
-	.register_type = SH_ETH_REG_FAST_SH4,
 	.set_mdio_gate = sh7757_eth_set_mdio_gate,
 };
 
@@ -106,7 +105,6 @@ static struct resource sh_eth1_resources[] = {
 static struct sh_eth_plat_data sh7757_eth1_pdata = {
 	.phy = 1,
 	.edmac_endian = EDMAC_LITTLE_ENDIAN,
-	.register_type = SH_ETH_REG_FAST_SH4,
 	.set_mdio_gate = sh7757_eth_set_mdio_gate,
 };
 
@@ -151,7 +149,6 @@ static struct resource sh_eth_giga0_resources[] = {
 static struct sh_eth_plat_data sh7757_eth_giga0_pdata = {
 	.phy = 18,
 	.edmac_endian = EDMAC_LITTLE_ENDIAN,
-	.register_type = SH_ETH_REG_GIGABIT,
 	.set_mdio_gate = sh7757_eth_giga_set_mdio_gate,
 	.phy_interface = PHY_INTERFACE_MODE_RGMII_ID,
 };
@@ -186,7 +183,6 @@ static struct resource sh_eth_giga1_resources[] = {
 static struct sh_eth_plat_data sh7757_eth_giga1_pdata = {
 	.phy = 19,
 	.edmac_endian = EDMAC_LITTLE_ENDIAN,
-	.register_type = SH_ETH_REG_GIGABIT,
 	.set_mdio_gate = sh7757_eth_giga_set_mdio_gate,
 	.phy_interface = PHY_INTERFACE_MODE_RGMII_ID,
 };
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 61fade0f..1fa8be4 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -30,6 +30,7 @@
 #include <linux/spi/mmc_spi.h>
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
+#include <linux/platform_data/gpio_backlight.h>
 #include <linux/sh_eth.h>
 #include <linux/sh_intc.h>
 #include <linux/videodev2.h>
@@ -159,7 +160,6 @@ static struct resource sh_eth_resources[] = {
 static struct sh_eth_plat_data sh_eth_plat = {
 	.phy = 0x1f, /* SMSC LAN8700 */
 	.edmac_endian = EDMAC_LITTLE_ENDIAN,
-	.register_type = SH_ETH_REG_FAST_SH4,
 	.phy_interface = PHY_INTERFACE_MODE_MII,
 	.ether_link_active_low = 1
 };
@@ -303,7 +303,7 @@ static struct platform_device usbhs_device = {
 	.resource	= usbhs_resources,
 };
 
-/* LCDC */
+/* LCDC and backlight */
 static const struct fb_videomode ecovec_lcd_modes[] = {
 	{
 		.name		= "Panel",
@@ -334,13 +334,6 @@ static const struct fb_videomode ecovec_dvi_modes[] = {
 	},
 };
 
-static int ecovec24_set_brightness(int brightness)
-{
-	gpio_set_value(GPIO_PTR1, brightness);
-
-	return 0;
-}
-
 static struct sh_mobile_lcdc_info lcdc_info = {
 	.ch[0] = {
 		.interface_type = RGB18,
@@ -350,11 +343,6 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 			.width = 152,
 			.height = 91,
 		},
-		.bl_info = {
-			.name = "sh_mobile_lcdc_bl",
-			.max_brightness = 1,
-			.set_brightness = ecovec24_set_brightness,
-		},
 	}
 };
 
@@ -380,6 +368,20 @@ static struct platform_device lcdc_device = {
 	},
 };
 
+static struct gpio_backlight_platform_data gpio_backlight_data = {
+	.fbdev = &lcdc_device.dev,
+	.gpio = GPIO_PTR1,
+	.def_value = 1,
+	.name = "backlight",
+};
+
+static struct platform_device gpio_backlight_device = {
+	.name = "gpio-backlight",
+	.dev = {
+		.platform_data = &gpio_backlight_data,
+	},
+};
+
 /* CEU0 */
 static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
 	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
@@ -598,37 +600,13 @@ static struct platform_device sdhi0_power = {
 	},
 };
 
-static void sdhi0_set_pwr(struct platform_device *pdev, int state)
-{
-	static int power_gpio = -EINVAL;
-
-	if (power_gpio < 0) {
-		int ret = gpio_request(GPIO_PTB6, NULL);
-		if (!ret) {
-			power_gpio = GPIO_PTB6;
-			gpio_direction_output(power_gpio, 0);
-		}
-	}
-
-	/*
-	 * Toggle the GPIO regardless, whether we managed to grab it above or
-	 * the fixed regulator driver did.
-	 */
-	gpio_set_value(GPIO_PTB6, state);
-}
-
-static int sdhi0_get_cd(struct platform_device *pdev)
-{
-	return !gpio_get_value(GPIO_PTY7);
-}
-
 static struct sh_mobile_sdhi_info sdhi0_info = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
-	.set_pwr	= sdhi0_set_pwr,
 	.tmio_caps      = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD |
 			  MMC_CAP_NEEDS_POLL,
-	.get_cd		= sdhi0_get_cd,
+	.tmio_flags	= TMIO_MMC_USE_GPIO_CD,
+	.cd_gpio	= GPIO_PTY7,
 };
 
 static struct resource sdhi0_resources[] = {
@@ -654,39 +632,15 @@ static struct platform_device sdhi0_device = {
 	},
 };
 
-static void cn12_set_pwr(struct platform_device *pdev, int state)
-{
-	static int power_gpio = -EINVAL;
-
-	if (power_gpio < 0) {
-		int ret = gpio_request(GPIO_PTB7, NULL);
-		if (!ret) {
-			power_gpio = GPIO_PTB7;
-			gpio_direction_output(power_gpio, 0);
-		}
-	}
-
-	/*
-	 * Toggle the GPIO regardless, whether we managed to grab it above or
-	 * the fixed regulator driver did.
-	 */
-	gpio_set_value(GPIO_PTB7, state);
-}
-
 #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
 /* SDHI1 */
-static int sdhi1_get_cd(struct platform_device *pdev)
-{
-	return !gpio_get_value(GPIO_PTW7);
-}
-
 static struct sh_mobile_sdhi_info sdhi1_info = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI1_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI1_RX,
 	.tmio_caps      = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD |
 			  MMC_CAP_NEEDS_POLL,
-	.set_pwr	= cn12_set_pwr,
-	.get_cd		= sdhi1_get_cd,
+	.tmio_flags	= TMIO_MMC_USE_GPIO_CD,
+	.cd_gpio	= GPIO_PTW7,
 };
 
 static struct resource sdhi1_resources[] = {
@@ -716,27 +670,19 @@ static struct platform_device sdhi1_device = {
 #else
 
 /* MMC SPI */
-static int mmc_spi_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_PTY6);
-}
-
-static int mmc_spi_get_cd(struct device *dev)
-{
-	return !gpio_get_value(GPIO_PTY7);
-}
-
 static void mmc_spi_setpower(struct device *dev, unsigned int maskval)
 {
 	gpio_set_value(GPIO_PTB6, maskval ? 1 : 0);
 }
 
 static struct mmc_spi_platform_data mmc_spi_info = {
-	.get_ro = mmc_spi_get_ro,
-	.get_cd = mmc_spi_get_cd,
 	.caps = MMC_CAP_NEEDS_POLL,
+	.caps2 = MMC_CAP2_RO_ACTIVE_HIGH,
 	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* 3.3V only */
 	.setpower = mmc_spi_setpower,
+	.flags = MMC_SPI_USE_CD_GPIO | MMC_SPI_USE_RO_GPIO,
+	.cd_gpio = GPIO_PTY7,
+	.ro_gpio = GPIO_PTY6,
 };
 
 static struct spi_board_info spi_bus[] = {
@@ -996,11 +942,6 @@ static struct platform_device vou_device = {
 
 #if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
 /* SH_MMCIF */
-static void mmcif_down_pwr(struct platform_device *pdev)
-{
-	cn12_set_pwr(pdev, 0);
-}
-
 static struct resource sh_mmcif_resources[] = {
 	[0] = {
 		.name	= "SH_MMCIF",
@@ -1021,8 +962,6 @@ static struct resource sh_mmcif_resources[] = {
 };
 
 static struct sh_mmcif_plat_data sh_mmcif_plat = {
-	.set_pwr	= cn12_set_pwr,
-	.down_pwr	= mmcif_down_pwr,
 	.sup_pclk	= 0, /* SH7724: Max Pclk/2 */
 	.caps		= MMC_CAP_4_BIT_DATA |
 			  MMC_CAP_8_BIT_DATA |
@@ -1049,6 +988,7 @@ static struct platform_device *ecovec_devices[] __initdata = {
 	&usb1_common_device,
 	&usbhs_device,
 	&lcdc_device,
+	&gpio_backlight_device,
 	&ceu0_device,
 	&ceu1_device,
 	&keysc_device,
@@ -1239,11 +1179,9 @@ static int __init arch_setup(void)
 
 	gpio_request(GPIO_PTE6, NULL);
 	gpio_request(GPIO_PTU1, NULL);
-	gpio_request(GPIO_PTR1, NULL);
 	gpio_request(GPIO_PTA2, NULL);
 	gpio_direction_input(GPIO_PTE6);
 	gpio_direction_output(GPIO_PTU1, 0);
-	gpio_direction_output(GPIO_PTR1, 0);
 	gpio_direction_output(GPIO_PTA2, 0);
 
 	/* I/O buffer drive ability is high */
@@ -1256,6 +1194,9 @@ static int __init arch_setup(void)
 		lcdc_info.ch[0].lcd_modes		= ecovec_dvi_modes;
 		lcdc_info.ch[0].num_modes		= ARRAY_SIZE(ecovec_dvi_modes);
 
+		/* No backlight */
+		gpio_backlight_data.fbdev = NULL;
+
 		gpio_set_value(GPIO_PTA2, 1);
 		gpio_set_value(GPIO_PTU1, 1);
 	} else {
@@ -1265,8 +1206,6 @@ static int __init arch_setup(void)
 		lcdc_info.ch[0].lcd_modes		= ecovec_lcd_modes;
 		lcdc_info.ch[0].num_modes		= ARRAY_SIZE(ecovec_lcd_modes);
 
-		gpio_set_value(GPIO_PTR1, 1);
-
 		/* FIXME
 		 *
 		 * LCDDON control is needed for Panel,
@@ -1339,10 +1278,6 @@ static int __init arch_setup(void)
 	gpio_direction_input(GPIO_PTR6);
 
 	/* SD-card slot CN11 */
-	/* Card-detect, used on CN11, either with SDHI0 or with SPI */
-	gpio_request(GPIO_PTY7, NULL);
-	gpio_direction_input(GPIO_PTY7);
-
 #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
 	/* enable SDHI0 on CN11 (needs DS2.4 set to ON) */
 	gpio_request(GPIO_FN_SDHI0WP,  NULL);
@@ -1361,8 +1296,6 @@ static int __init arch_setup(void)
 	gpio_direction_output(GPIO_PTM4, 1); /* active low CS */
 	gpio_request(GPIO_PTB6, NULL); /* 3.3V power control */
 	gpio_direction_output(GPIO_PTB6, 0); /* disable power by default */
-	gpio_request(GPIO_PTY6, NULL); /* write protect */
-	gpio_direction_input(GPIO_PTY6);
 
 	spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
 #endif
@@ -1392,10 +1325,6 @@ static int __init arch_setup(void)
 	gpio_request(GPIO_FN_SDHI1D1,  NULL);
 	gpio_request(GPIO_FN_SDHI1D0,  NULL);
 
-	/* Card-detect, used on CN12 with SDHI1 */
-	gpio_request(GPIO_PTW7, NULL);
-	gpio_direction_input(GPIO_PTW7);
-
 	cn12_enabled = true;
 #endif
 
diff --git a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
index c620503..355a78a 100644
--- a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
+++ b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
@@ -276,51 +276,3 @@ void kfr2r09_lcd_start(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so)
 {
 	write_memory_start(sohandle, so);
 }
-
-#define CTRL_CKSW       0x10
-#define CTRL_C10        0x20
-#define CTRL_CPSW       0x80
-#define MAIN_MLED4      0x40
-#define MAIN_MSW        0x80
-
-int kfr2r09_lcd_set_brightness(int brightness)
-{
-	struct i2c_adapter *a;
-	struct i2c_msg msg;
-	unsigned char buf[2];
-	int ret;
-
-	a = i2c_get_adapter(0);
-	if (!a)
-		return -ENODEV;
-
-	buf[0] = 0x00;
-	if (brightness)
-		buf[1] = CTRL_CPSW | CTRL_C10 | CTRL_CKSW;
-	else
-		buf[1] = 0;
-
-	msg.addr = 0x75;
-	msg.buf = buf;
-	msg.len = 2;
-	msg.flags = 0;
-	ret = i2c_transfer(a, &msg, 1);
-	if (ret != 1)
-		return -ENODEV;
-
-	buf[0] = 0x01;
-	if (brightness)
-		buf[1] = MAIN_MSW | MAIN_MLED4 | 0x0c;
-	else
-		buf[1] = 0;
-
-	msg.addr = 0x75;
-	msg.buf = buf;
-	msg.len = 2;
-	msg.flags = 0;
-	ret = i2c_transfer(a, &msg, 1);
-	if (ret != 1)
-		return -ENODEV;
-
-	return 0;
-}
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index ab502f12..1df4398 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -21,6 +21,7 @@
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
 #include <linux/i2c.h>
+#include <linux/platform_data/lv5207lp.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/usb/r8a66597.h>
@@ -159,11 +160,6 @@ static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
 			.setup_sys = kfr2r09_lcd_setup,
 			.start_transfer = kfr2r09_lcd_start,
 		},
-		.bl_info = {
-			.name = "sh_mobile_lcdc_bl",
-			.max_brightness = 1,
-			.set_brightness = kfr2r09_lcd_set_brightness,
-		},
 		.sys_bus_cfg = {
 			.ldmt2r = 0x07010904,
 			.ldmt3r = 0x14012914,
@@ -195,6 +191,17 @@ static struct platform_device kfr2r09_sh_lcdc_device = {
 	},
 };
 
+static struct lv5207lp_platform_data kfr2r09_backlight_data = {
+	.fbdev = &kfr2r09_sh_lcdc_device.dev,
+	.def_value = 13,
+	.max_value = 13,
+};
+
+static struct i2c_board_info kfr2r09_backlight_board_info = {
+	I2C_BOARD_INFO("lv5207lp", 0x75),
+	.platform_data = &kfr2r09_backlight_data,
+};
+
 static struct r8a66597_platdata kfr2r09_usb0_gadget_data = {
 	.on_chip = 1,
 };
@@ -627,6 +634,8 @@ static int __init kfr2r09_devices_setup(void)
 	gpio_request(GPIO_FN_SDHI0CMD, NULL);
 	gpio_request(GPIO_FN_SDHI0CLK, NULL);
 
+	i2c_register_board_info(0, &kfr2r09_backlight_board_info, 1);
+
 	return platform_add_devices(kfr2r09_devices,
 				    ARRAY_SIZE(kfr2r09_devices));
 }
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index b70180e..21e4230 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -365,7 +365,7 @@ static struct platform_device keysc_device = {
 static struct resource sh_eth_resources[] = {
 	[0] = {
 		.start = SH_ETH_ADDR,
-		.end   = SH_ETH_ADDR + 0x1FC,
+		.end   = SH_ETH_ADDR + 0x1FC - 1,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -377,6 +377,7 @@ static struct resource sh_eth_resources[] = {
 static struct sh_eth_plat_data sh_eth_plat = {
 	.phy = 0x1f, /* SMSC LAN8187 */
 	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
 };
 
 static struct platform_device sh_eth_device = {
diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c
index 50ba481..2c8fb04 100644
--- a/arch/sh/boards/mach-sh7763rdp/setup.c
+++ b/arch/sh/boards/mach-sh7763rdp/setup.c
@@ -88,7 +88,6 @@ static struct resource sh_eth_resources[] = {
 static struct sh_eth_plat_data sh7763_eth_pdata = {
 	.phy = 1,
 	.edmac_endian = EDMAC_LITTLE_ENDIAN,
-	.register_type = SH_ETH_REG_GIGABIT,
 	.phy_interface = PHY_INTERFACE_MODE_MII,
 };
 
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 102f5d5..60ed3e1 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -69,7 +69,6 @@ static void pcibios_scanbus(struct pci_channel *hose)
 
 		pci_bus_size_bridges(bus);
 		pci_bus_assign_resources(bus);
-		pci_enable_bridges(bus);
 	} else {
 		pci_free_resource_list(&resources);
 	}
diff --git a/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h b/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
index c20c9e5..79f154e 100644
--- a/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
+++ b/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
@@ -4,13 +4,11 @@
 #include <video/sh_mobile_lcdc.h>
 
 #if defined(CONFIG_FB_SH_MOBILE_LCDC) || defined(CONFIG_FB_SH_MOBILE_LCDC_MODULE)
-int kfr2r09_lcd_set_brightness(int brightness);
 int kfr2r09_lcd_setup(void *sys_ops_handle,
 		      struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
 void kfr2r09_lcd_start(void *sys_ops_handle,
 		       struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
 #else
-static int kfr2r09_lcd_set_brightness(int brightness) {}
 static int kfr2r09_lcd_setup(void *sys_ops_handle,
 				struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
 {
diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
index bb11e19..4df4d4f 100644
--- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
+#include <linux/sh_eth.h>
 #include <linux/sh_timer.h>
 #include <linux/io.h>
 
@@ -110,10 +111,16 @@ static struct platform_device scif2_device = {
 	},
 };
 
+static struct sh_eth_plat_data eth_platform_data = {
+	.phy		= 1,
+	.edmac_endian	= EDMAC_LITTLE_ENDIAN,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
 static struct resource eth_resources[] = {
 	[0] = {
 		.start = 0xfb000000,
-		.end =   0xfb0001c8,
+		.end = 0xfb0001c7,
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -127,7 +134,7 @@ static struct platform_device eth_device = {
 	.name = "sh7619-ether",
 	.id = -1,
 	.dev = {
-		.platform_data = (void *)1,
+		.platform_data = &eth_platform_data,
 	},
 	.num_resources = ARRAY_SIZE(eth_resources),
 	.resource = eth_resources,
diff --git a/arch/sh/kernel/cpu/shmobile/cpuidle.c b/arch/sh/kernel/cpu/shmobile/cpuidle.c
index d306225..e3abfd4 100644
--- a/arch/sh/kernel/cpu/shmobile/cpuidle.c
+++ b/arch/sh/kernel/cpu/shmobile/cpuidle.c
@@ -91,13 +91,11 @@ static struct cpuidle_driver cpuidle_driver = {
 
 int __init sh_mobile_setup_cpuidle(void)
 {
-	int ret;
-
 	if (sh_mobile_sleep_supported & SUSP_SH_SF)
 		cpuidle_driver.states[1].disabled = false;
 
 	if (sh_mobile_sleep_supported & SUSP_SH_STANDBY)
 		cpuidle_driver.states[2].disabled = false;
 
-	return cpuidle_register(&cpuidle_driver);
+	return cpuidle_register(&cpuidle_driver, NULL);
 }
diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c
index 1f49c28a..541dc61 100644
--- a/arch/sh/mm/fault.c
+++ b/arch/sh/mm/fault.c
@@ -400,9 +400,7 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 	struct mm_struct *mm;
 	struct vm_area_struct * vma;
 	int fault;
-	int write = error_code & FAULT_CODE_WRITE;
-	unsigned int flags = (FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
-			      (write ? FAULT_FLAG_WRITE : 0));
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
 
 	tsk = current;
 	mm = tsk->mm;
@@ -476,6 +474,11 @@ good_area:
 
 	set_thread_fault_code(error_code);
 
+	if (user_mode(regs))
+		flags |= FAULT_FLAG_USER;
+	if (error_code & FAULT_CODE_WRITE)
+		flags |= FAULT_FLAG_WRITE;
+
 	/*
 	 * If for any reason at all we couldn't handle the fault,
 	 * make sure we exit gracefully rather than endlessly redo
diff --git a/arch/sh/mm/hugetlbpage.c b/arch/sh/mm/hugetlbpage.c
index d776234..0d676a4 100644
--- a/arch/sh/mm/hugetlbpage.c
+++ b/arch/sh/mm/hugetlbpage.c
@@ -83,6 +83,11 @@ int pud_huge(pud_t pud)
 	return 0;
 }
 
+int pmd_huge_support(void)
+{
+	return 0;
+}
+
 struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 			     pmd_t *pmd, int write)
 {
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index a00cbd3..78c4fdb 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -26,7 +26,6 @@ config SPARC
 	select HAVE_DMA_ATTRS
 	select HAVE_DMA_API_DEBUG
 	select HAVE_ARCH_JUMP_LABEL
-	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_SHOW
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select USE_GENERIC_SMP_HELPERS if SMP
@@ -52,7 +51,6 @@ config SPARC32
 
 config SPARC64
 	def_bool 64BIT
-	select ARCH_SUPPORTS_MSI
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_GRAPH_FP_TEST
@@ -508,12 +506,17 @@ config SUN_OPENPROMFS
 	  Only choose N if you know in advance that you will not need to modify
 	  OpenPROM settings on the running system.
 
-# Makefile helper
+# Makefile helpers
 config SPARC64_PCI
 	bool
 	default y
 	depends on SPARC64 && PCI
 
+config SPARC64_PCI_MSI
+	bool
+	default y
+	depends on SPARC64_PCI && PCI_MSI
+
 endmenu
 
 menu "Executable file formats"
diff --git a/arch/sparc/include/asm/floppy_64.h b/arch/sparc/include/asm/floppy_64.h
index e204f90..7c90c50 100644
--- a/arch/sparc/include/asm/floppy_64.h
+++ b/arch/sparc/include/asm/floppy_64.h
@@ -254,7 +254,7 @@ static int sun_fd_request_irq(void)
 		once = 1;
 
 		error = request_irq(FLOPPY_IRQ, sparc_floppy_irq,
-				    IRQF_DISABLED, "floppy", NULL);
+				    0, "floppy", NULL);
 
 		return ((error == 0) ? 0 : -1);
 	}
diff --git a/arch/sparc/include/asm/jump_label.h b/arch/sparc/include/asm/jump_label.h
index 5080d16..ec2e2e2 100644
--- a/arch/sparc/include/asm/jump_label.h
+++ b/arch/sparc/include/asm/jump_label.h
@@ -9,7 +9,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key *key)
 {
-		asm goto("1:\n\t"
+		asm_volatile_goto("1:\n\t"
 			 "nop\n\t"
 			 "nop\n\t"
 			 ".pushsection __jump_table,  \"aw\"\n\t"
diff --git a/arch/sparc/include/asm/switch_to_64.h b/arch/sparc/include/asm/switch_to_64.h
index c7de332..8d28480 100644
--- a/arch/sparc/include/asm/switch_to_64.h
+++ b/arch/sparc/include/asm/switch_to_64.h
@@ -48,8 +48,8 @@ do {	save_and_clear_fpu();						\
 	"wrpr	%%g0, 14, %%pil\n\t"					\
 	"brz,pt %%o7, switch_to_pc\n\t"					\
 	" mov	%%g7, %0\n\t"						\
-	"sethi	%%hi(ret_from_syscall), %%g1\n\t"			\
-	"jmpl	%%g1 + %%lo(ret_from_syscall), %%g0\n\t"		\
+	"sethi	%%hi(ret_from_fork), %%g1\n\t"				\
+	"jmpl	%%g1 + %%lo(ret_from_fork), %%g0\n\t"			\
 	" nop\n\t"							\
 	".globl switch_to_pc\n\t"					\
 	"switch_to_pc:\n\t"						\
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index d432fb2..d15cc17 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -1,3 +1,4 @@
+
 #
 # Makefile for the linux kernel.
 #
@@ -99,7 +100,7 @@ obj-$(CONFIG_STACKTRACE)     += stacktrace.o
 obj-$(CONFIG_SPARC64_PCI)    += pci.o pci_common.o psycho_common.o
 obj-$(CONFIG_SPARC64_PCI)    += pci_psycho.o pci_sabre.o pci_schizo.o
 obj-$(CONFIG_SPARC64_PCI)    += pci_sun4v.o pci_sun4v_asm.o pci_fire.o
-obj-$(CONFIG_PCI_MSI)        += pci_msi.o
+obj-$(CONFIG_SPARC64_PCI_MSI) += pci_msi.o
 
 obj-$(CONFIG_COMPAT)         += sys32.o sys_sparc32.o signal32.o
 
diff --git a/arch/sparc/kernel/cpumap.c b/arch/sparc/kernel/cpumap.c
index e4de74c..cb5d272 100644
--- a/arch/sparc/kernel/cpumap.c
+++ b/arch/sparc/kernel/cpumap.c
@@ -327,6 +327,7 @@ static int iterate_cpu(struct cpuinfo_tree *t, unsigned int root_index)
 	case SUN4V_CHIP_NIAGARA3:
 	case SUN4V_CHIP_NIAGARA4:
 	case SUN4V_CHIP_NIAGARA5:
+	case SUN4V_CHIP_SPARC64X:
 		rover_inc_table = niagara_iterate_method;
 		break;
 	default:
diff --git a/arch/sparc/kernel/ds.c b/arch/sparc/kernel/ds.c
index 62d6b15..dff60ab 100644
--- a/arch/sparc/kernel/ds.c
+++ b/arch/sparc/kernel/ds.c
@@ -849,9 +849,8 @@ void ldom_reboot(const char *boot_command)
 	if (boot_command && strlen(boot_command)) {
 		unsigned long len;
 
-		strcpy(full_boot_str, "boot ");
-		strlcpy(full_boot_str + strlen("boot "), boot_command,
-			sizeof(full_boot_str + strlen("boot ")));
+		snprintf(full_boot_str, sizeof(full_boot_str), "boot %s",
+			 boot_command);
 		len = strlen(full_boot_str);
 
 		if (reboot_data_supported) {
diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index e2a0300..33c02b1 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -839,7 +839,7 @@ sys_sigreturn:
 	 nop
 
 	call	syscall_trace
-	 nop
+	 mov	1, %o1
 
 1:
 	/* We don't want to muck with user registers like a
diff --git a/arch/sparc/kernel/kgdb_64.c b/arch/sparc/kernel/kgdb_64.c
index c875955..53c0a82 100644
--- a/arch/sparc/kernel/kgdb_64.c
+++ b/arch/sparc/kernel/kgdb_64.c
@@ -42,7 +42,7 @@ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
 {
 	struct thread_info *t = task_thread_info(p);
 	extern unsigned int switch_to_pc;
-	extern unsigned int ret_from_syscall;
+	extern unsigned int ret_from_fork;
 	struct reg_window *win;
 	unsigned long pc, cwp;
 	int i;
@@ -66,7 +66,7 @@ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
 		gdb_regs[i] = 0;
 
 	if (t->new_child)
-		pc = (unsigned long) &ret_from_syscall;
+		pc = (unsigned long) &ret_from_fork;
 	else
 		pc = (unsigned long) &switch_to_pc;
 
diff --git a/arch/sparc/kernel/ktlb.S b/arch/sparc/kernel/ktlb.S
index 0746e5e..fde5a41 100644
--- a/arch/sparc/kernel/ktlb.S
+++ b/arch/sparc/kernel/ktlb.S
@@ -25,11 +25,10 @@ kvmap_itlb:
 	 */
 kvmap_itlb_4v:
 
-kvmap_itlb_nonlinear:
 	/* Catch kernel NULL pointer calls.  */
 	sethi		%hi(PAGE_SIZE), %g5
 	cmp		%g4, %g5
-	bleu,pn		%xcc, kvmap_dtlb_longpath
+	blu,pn		%xcc, kvmap_itlb_longpath
 	 nop
 
 	KERN_TSB_LOOKUP_TL1(%g4, %g6, %g5, %g1, %g2, %g3, kvmap_itlb_load)
diff --git a/arch/sparc/kernel/ldc.c b/arch/sparc/kernel/ldc.c
index 54df554..e01d75d 100644
--- a/arch/sparc/kernel/ldc.c
+++ b/arch/sparc/kernel/ldc.c
@@ -1249,12 +1249,12 @@ int ldc_bind(struct ldc_channel *lp, const char *name)
 	snprintf(lp->rx_irq_name, LDC_IRQ_NAME_MAX, "%s RX", name);
 	snprintf(lp->tx_irq_name, LDC_IRQ_NAME_MAX, "%s TX", name);
 
-	err = request_irq(lp->cfg.rx_irq, ldc_rx, IRQF_DISABLED,
+	err = request_irq(lp->cfg.rx_irq, ldc_rx, 0,
 			  lp->rx_irq_name, lp);
 	if (err)
 		return err;
 
-	err = request_irq(lp->cfg.tx_irq, ldc_tx, IRQF_DISABLED,
+	err = request_irq(lp->cfg.tx_irq, ldc_tx, 0,
 			  lp->tx_irq_name, lp);
 	if (err) {
 		free_irq(lp->cfg.rx_irq, lp);
diff --git a/arch/sparc/kernel/ptrace_64.c b/arch/sparc/kernel/ptrace_64.c
index 7ff45e4..773c1f2 100644
--- a/arch/sparc/kernel/ptrace_64.c
+++ b/arch/sparc/kernel/ptrace_64.c
@@ -14,6 +14,7 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/errno.h>
+#include <linux/export.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
 #include <linux/smp.h>
@@ -116,6 +117,7 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 
 	preempt_enable();
 }
+EXPORT_SYMBOL_GPL(flush_ptrace_access);
 
 static int get_from_target(struct task_struct *target, unsigned long uaddr,
 			   void *kbuf, int len)
@@ -1087,7 +1089,7 @@ asmlinkage void syscall_trace_leave(struct pt_regs *regs)
 	audit_syscall_exit(regs);
 
 	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
-		trace_sys_exit(regs, regs->u_regs[UREG_G1]);
+		trace_sys_exit(regs, regs->u_regs[UREG_I0]);
 
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
 		tracehook_report_syscall_exit(regs, 0);
diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c
index 1378554..3fdb455 100644
--- a/arch/sparc/kernel/setup_64.c
+++ b/arch/sparc/kernel/setup_64.c
@@ -499,12 +499,14 @@ static void __init init_sparc64_elf_hwcap(void)
 		    sun4v_chip_type == SUN4V_CHIP_NIAGARA2 ||
 		    sun4v_chip_type == SUN4V_CHIP_NIAGARA3 ||
 		    sun4v_chip_type == SUN4V_CHIP_NIAGARA4 ||
-		    sun4v_chip_type == SUN4V_CHIP_NIAGARA5)
+		    sun4v_chip_type == SUN4V_CHIP_NIAGARA5 ||
+		    sun4v_chip_type == SUN4V_CHIP_SPARC64X)
 			cap |= HWCAP_SPARC_BLKINIT;
 		if (sun4v_chip_type == SUN4V_CHIP_NIAGARA2 ||
 		    sun4v_chip_type == SUN4V_CHIP_NIAGARA3 ||
 		    sun4v_chip_type == SUN4V_CHIP_NIAGARA4 ||
-		    sun4v_chip_type == SUN4V_CHIP_NIAGARA5)
+		    sun4v_chip_type == SUN4V_CHIP_NIAGARA5 ||
+		    sun4v_chip_type == SUN4V_CHIP_SPARC64X)
 			cap |= HWCAP_SPARC_N2;
 	}
 
@@ -530,13 +532,15 @@ static void __init init_sparc64_elf_hwcap(void)
 			if (sun4v_chip_type == SUN4V_CHIP_NIAGARA2 ||
 			    sun4v_chip_type == SUN4V_CHIP_NIAGARA3 ||
 			    sun4v_chip_type == SUN4V_CHIP_NIAGARA4 ||
-			    sun4v_chip_type == SUN4V_CHIP_NIAGARA5)
+			    sun4v_chip_type == SUN4V_CHIP_NIAGARA5 ||
+			    sun4v_chip_type == SUN4V_CHIP_SPARC64X)
 				cap |= (AV_SPARC_VIS | AV_SPARC_VIS2 |
 					AV_SPARC_ASI_BLK_INIT |
 					AV_SPARC_POPC);
 			if (sun4v_chip_type == SUN4V_CHIP_NIAGARA3 ||
 			    sun4v_chip_type == SUN4V_CHIP_NIAGARA4 ||
-			    sun4v_chip_type == SUN4V_CHIP_NIAGARA5)
+			    sun4v_chip_type == SUN4V_CHIP_NIAGARA5 ||
+			    sun4v_chip_type == SUN4V_CHIP_SPARC64X)
 				cap |= (AV_SPARC_VIS3 | AV_SPARC_HPC |
 					AV_SPARC_FMAF);
 		}
diff --git a/arch/sparc/kernel/sys_sparc32.c b/arch/sparc/kernel/sys_sparc32.c
index 3d0ddbc..7136885 100644
--- a/arch/sparc/kernel/sys_sparc32.c
+++ b/arch/sparc/kernel/sys_sparc32.c
@@ -169,10 +169,10 @@ COMPAT_SYSCALL_DEFINE5(rt_sigaction, int, sig,
 		new_ka.ka_restorer = restorer;
 		ret = get_user(u_handler, &act->sa_handler);
 		new_ka.sa.sa_handler =  compat_ptr(u_handler);
-		ret |= __copy_from_user(&set32, &act->sa_mask, sizeof(compat_sigset_t));
+		ret |= copy_from_user(&set32, &act->sa_mask, sizeof(compat_sigset_t));
 		sigset_from_compat(&new_ka.sa.sa_mask, &set32);
-		ret |= __get_user(new_ka.sa.sa_flags, &act->sa_flags);
-		ret |= __get_user(u_restorer, &act->sa_restorer);
+		ret |= get_user(new_ka.sa.sa_flags, &act->sa_flags);
+		ret |= get_user(u_restorer, &act->sa_restorer);
 		new_ka.sa.sa_restorer = compat_ptr(u_restorer);
                 if (ret)
                 	return -EFAULT;
@@ -183,9 +183,9 @@ COMPAT_SYSCALL_DEFINE5(rt_sigaction, int, sig,
 	if (!ret && oact) {
 		sigset_to_compat(&set32, &old_ka.sa.sa_mask);
 		ret = put_user(ptr_to_compat(old_ka.sa.sa_handler), &oact->sa_handler);
-		ret |= __copy_to_user(&oact->sa_mask, &set32, sizeof(compat_sigset_t));
-		ret |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
-		ret |= __put_user(ptr_to_compat(old_ka.sa.sa_restorer), &oact->sa_restorer);
+		ret |= copy_to_user(&oact->sa_mask, &set32, sizeof(compat_sigset_t));
+		ret |= put_user(old_ka.sa.sa_flags, &oact->sa_flags);
+		ret |= put_user(ptr_to_compat(old_ka.sa.sa_restorer), &oact->sa_restorer);
 		if (ret)
 			ret = -EFAULT;
         }
diff --git a/arch/sparc/kernel/syscalls.S b/arch/sparc/kernel/syscalls.S
index 22a1098..d950197 100644
--- a/arch/sparc/kernel/syscalls.S
+++ b/arch/sparc/kernel/syscalls.S
@@ -98,8 +98,8 @@ sys_clone:
 	ba,pt	%xcc, sparc_do_fork
 	 add	%sp, PTREGS_OFF, %o2
 
-	.globl	ret_from_syscall
-ret_from_syscall:
+	.globl	ret_from_fork
+ret_from_fork:
 	/* Clear current_thread_info()->new_child. */
 	stb	%g0, [%g6 + TI_NEW_CHILD]
 	call	schedule_tail
@@ -152,7 +152,7 @@ linux_syscall_trace32:
 	srl	%i4, 0, %o4
 	srl	%i1, 0, %o1
 	srl	%i2, 0, %o2
-	ba,pt	%xcc, 2f
+	ba,pt	%xcc, 5f
 	 srl	%i3, 0, %o3
 
 linux_syscall_trace:
@@ -182,13 +182,13 @@ linux_sparc_syscall32:
 	srl	%i1, 0, %o1				! IEU0	Group
 	ldx	[%g6 + TI_FLAGS], %l0		! Load
 
-	srl	%i5, 0, %o5				! IEU1
+	srl	%i3, 0, %o3				! IEU0
 	srl	%i2, 0, %o2				! IEU0	Group
 	andcc	%l0, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT|_TIF_SYSCALL_TRACEPOINT), %g0
 	bne,pn	%icc, linux_syscall_trace32		! CTI
 	 mov	%i0, %l5				! IEU1
-	call	%l7					! CTI	Group brk forced
-	 srl	%i3, 0, %o3				! IEU0
+5:	call	%l7					! CTI	Group brk forced
+	 srl	%i5, 0, %o5				! IEU1
 	ba,a,pt	%xcc, 3f
 
 	/* Linux native system calls enter here... */
diff --git a/arch/sparc/kernel/trampoline_64.S b/arch/sparc/kernel/trampoline_64.S
index e0b1e13..ad4bde3 100644
--- a/arch/sparc/kernel/trampoline_64.S
+++ b/arch/sparc/kernel/trampoline_64.S
@@ -129,7 +129,6 @@ startup_continue:
 	clr		%l5
 	sethi		%hi(num_kernel_image_mappings), %l6
 	lduw		[%l6 + %lo(num_kernel_image_mappings)], %l6
-	add		%l6, 1, %l6
 
 	mov		15, %l7
 	BRANCH_IF_ANY_CHEETAH(g1,g5,2f)
@@ -222,7 +221,6 @@ niagara_lock_tlb:
 	clr		%l5
 	sethi		%hi(num_kernel_image_mappings), %l6
 	lduw		[%l6 + %lo(num_kernel_image_mappings)], %l6
-	add		%l6, 1, %l6
 
 1:
 	mov		HV_FAST_MMU_MAP_PERM_ADDR, %o5
diff --git a/arch/sparc/lib/ksyms.c b/arch/sparc/lib/ksyms.c
index 0c4e35e..323335b 100644
--- a/arch/sparc/lib/ksyms.c
+++ b/arch/sparc/lib/ksyms.c
@@ -98,15 +98,6 @@ EXPORT_SYMBOL(___copy_from_user);
 EXPORT_SYMBOL(___copy_in_user);
 EXPORT_SYMBOL(__clear_user);
 
-/* RW semaphores */
-EXPORT_SYMBOL(__down_read);
-EXPORT_SYMBOL(__down_read_trylock);
-EXPORT_SYMBOL(__down_write);
-EXPORT_SYMBOL(__down_write_trylock);
-EXPORT_SYMBOL(__up_read);
-EXPORT_SYMBOL(__up_write);
-EXPORT_SYMBOL(__downgrade_write);
-
 /* Atomic counter implementation. */
 EXPORT_SYMBOL(atomic_add);
 EXPORT_SYMBOL(atomic_add_ret);
diff --git a/arch/sparc/mm/fault_32.c b/arch/sparc/mm/fault_32.c
index e98bfda..59dbd46 100644
--- a/arch/sparc/mm/fault_32.c
+++ b/arch/sparc/mm/fault_32.c
@@ -177,8 +177,7 @@ asmlinkage void do_sparc_fault(struct pt_regs *regs, int text_fault, int write,
 	unsigned long g2;
 	int from_user = !(regs->psr & PSR_PS);
 	int fault, code;
-	unsigned int flags = (FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
-			      (write ? FAULT_FLAG_WRITE : 0));
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
 
 	if (text_fault)
 		address = regs->pc;
@@ -235,6 +234,11 @@ good_area:
 			goto bad_area;
 	}
 
+	if (from_user)
+		flags |= FAULT_FLAG_USER;
+	if (write)
+		flags |= FAULT_FLAG_WRITE;
+
 	/*
 	 * If for any reason at all we couldn't handle the fault,
 	 * make sure we exit gracefully rather than endlessly redo
@@ -383,6 +387,7 @@ static void force_user_fault(unsigned long address, int write)
 	struct vm_area_struct *vma;
 	struct task_struct *tsk = current;
 	struct mm_struct *mm = tsk->mm;
+	unsigned int flags = FAULT_FLAG_USER;
 	int code;
 
 	code = SEGV_MAPERR;
@@ -402,11 +407,12 @@ good_area:
 	if (write) {
 		if (!(vma->vm_flags & VM_WRITE))
 			goto bad_area;
+		flags |= FAULT_FLAG_WRITE;
 	} else {
 		if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
 			goto bad_area;
 	}
-	switch (handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0)) {
+	switch (handle_mm_fault(mm, vma, address, flags)) {
 	case VM_FAULT_SIGBUS:
 	case VM_FAULT_OOM:
 		goto do_sigbus;
diff --git a/arch/sparc/mm/fault_64.c b/arch/sparc/mm/fault_64.c
index 5062ff3..2ebec26 100644
--- a/arch/sparc/mm/fault_64.c
+++ b/arch/sparc/mm/fault_64.c
@@ -315,7 +315,8 @@ asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs)
 			bad_kernel_pc(regs, address);
 			return;
 		}
-	}
+	} else
+		flags |= FAULT_FLAG_USER;
 
 	/*
 	 * If we're in an interrupt or have no user
@@ -418,13 +419,14 @@ good_area:
 		    vma->vm_file != NULL)
 			set_thread_fault_code(fault_code |
 					      FAULT_CODE_BLKCOMMIT);
+
+		flags |= FAULT_FLAG_WRITE;
 	} else {
 		/* Allow reads even for write-only mappings */
 		if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
 			goto bad_area;
 	}
 
-	flags |= ((fault_code & FAULT_CODE_WRITE) ? FAULT_FLAG_WRITE : 0);
 	fault = handle_mm_fault(mm, vma, address, flags);
 
 	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
diff --git a/arch/sparc/mm/hugetlbpage.c b/arch/sparc/mm/hugetlbpage.c
index d2b5944..9639964 100644
--- a/arch/sparc/mm/hugetlbpage.c
+++ b/arch/sparc/mm/hugetlbpage.c
@@ -234,6 +234,11 @@ int pud_huge(pud_t pud)
 	return 0;
 }
 
+int pmd_huge_support(void)
+{
+	return 0;
+}
+
 struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 			     pmd_t *pmd, int write)
 {
diff --git a/arch/sparc/net/bpf_jit_comp.c b/arch/sparc/net/bpf_jit_comp.c
index 9c7be59e..218b6b2 100644
--- a/arch/sparc/net/bpf_jit_comp.c
+++ b/arch/sparc/net/bpf_jit_comp.c
@@ -808,4 +808,5 @@ void bpf_jit_free(struct sk_filter *fp)
 {
 	if (fp->bpf_func != sk_run_filter)
 		module_free(NULL, fp->bpf_func);
+	kfree(fp);
 }
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index 24565a7..d45a2c4 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -11,7 +11,6 @@ config TILE
 	select USE_GENERIC_SMP_HELPERS
 	select CC_OPTIMIZE_FOR_SIZE
 	select HAVE_DEBUG_KMEMLEAK
-	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_PENDING_IRQ if SMP
 	select GENERIC_IRQ_SHOW
@@ -26,6 +25,7 @@ config TILE
 	select HAVE_SYSCALL_TRACEPOINTS
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select HAVE_DEBUG_STACKOVERFLOW
+	select ARCH_WANT_FRAME_POINTERS
 
 # FIXME: investigate whether we need/want these options.
 #	select HAVE_IOREMAP_PROT
@@ -64,6 +64,9 @@ config HUGETLB_SUPER_PAGES
 	depends on HUGETLB_PAGE && TILEGX
 	def_bool y
 
+config GENERIC_TIME_VSYSCALL
+	def_bool y
+
 # FIXME: tilegx can implement a more efficient rwsem.
 config RWSEM_GENERIC_SPINLOCK
 	def_bool y
@@ -112,10 +115,19 @@ config SMP
 config HVC_TILE
 	depends on TTY
 	select HVC_DRIVER
+	select HVC_IRQ if TILEGX
 	def_bool y
 
 config TILEGX
-	bool "Building with TILE-Gx (64-bit) compiler and toolchain"
+	bool "Building for TILE-Gx (64-bit) processor"
+	select HAVE_FUNCTION_TRACER
+	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
+	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_DYNAMIC_FTRACE
+	select HAVE_FTRACE_MCOUNT_RECORD
+	select HAVE_KPROBES
+	select HAVE_KRETPROBES
+	select HAVE_ARCH_KGDB
 
 config TILEPRO
 	def_bool !TILEGX
@@ -194,7 +206,7 @@ config SYSVIPC_COMPAT
 	def_bool y
 	depends on COMPAT && SYSVIPC
 
-# We do not currently support disabling HIGHMEM on tile64 and tilepro.
+# We do not currently support disabling HIGHMEM on tilepro.
 config HIGHMEM
 	bool # "Support for more than 512 MB of RAM"
 	default !TILEGX
@@ -300,6 +312,8 @@ config PAGE_OFFSET
 
 source "mm/Kconfig"
 
+source "kernel/Kconfig.preempt"
+
 config CMDLINE_BOOL
 	bool "Built-in kernel command line"
 	default n
@@ -347,7 +361,7 @@ config CMDLINE_OVERRIDE
 
 config VMALLOC_RESERVE
 	hex
-	default 0x1000000
+	default 0x2000000
 
 config HARDWALL
 	bool "Hardwall support to allow access to user dynamic network"
@@ -380,7 +394,6 @@ config PCI
 	select PCI_DOMAINS
 	select GENERIC_PCI_IOMAP
 	select TILE_GXIO_TRIO if TILEGX
-	select ARCH_SUPPORTS_MSI if TILEGX
 	select PCI_MSI if TILEGX
 	---help---
 	  Enable PCI root complex support, so PCIe endpoint devices can
@@ -396,8 +409,20 @@ config NO_IOMEM
 config NO_IOPORT
 	def_bool !PCI
 
+config TILE_PCI_IO
+	bool "PCI I/O space support"
+	default n
+	depends on PCI
+	depends on TILEGX
+	---help---
+	  Enable PCI I/O space support on TILEGx. Since the PCI I/O space
+	  is used by few modern PCIe endpoint devices, its support is disabled
+	  by default to save the TRIO PIO Region resource for other purposes.
+
 source "drivers/pci/Kconfig"
 
+source "drivers/pci/pcie/Kconfig"
+
 config TILE_USB
 	tristate "Tilera USB host adapter support"
 	default y
diff --git a/arch/tile/Kconfig.debug b/arch/tile/Kconfig.debug
index 9165ea9..19734d3 100644
--- a/arch/tile/Kconfig.debug
+++ b/arch/tile/Kconfig.debug
@@ -14,14 +14,12 @@ config EARLY_PRINTK
 	  with klogd/syslogd. You should normally N here,
 	  unless you want to debug such a crash.
 
-config DEBUG_EXTRA_FLAGS
-	string "Additional compiler arguments when building with '-g'"
-	depends on DEBUG_INFO
-	default ""
+config TILE_HVGLUE_TRACE
+	bool "Provide wrapper functions for hypervisor ABI calls"
+	default n
 	help
-	  Debug info can be large, and flags like
-	  `-femit-struct-debug-baseonly' can reduce the kernel file
-	  size and build time noticeably.  Such flags are often
-	  helpful if the main use of debug info is line number info.
+	  Provide wrapper functions for the hypervisor ABI calls
+	  defined in arch/tile/kernel/hvglue.S.  This allows tracing
+	  mechanisms, etc., to have visibility into those calls.
 
 endmenu
diff --git a/arch/tile/Makefile b/arch/tile/Makefile
index 3d15364..4dc380a 100644
--- a/arch/tile/Makefile
+++ b/arch/tile/Makefile
@@ -30,10 +30,6 @@ endif
 # In kernel modules, this causes load failures due to unsupported relocations.
 KBUILD_CFLAGS   += -fno-asynchronous-unwind-tables
 
-ifneq ($(CONFIG_DEBUG_EXTRA_FLAGS),"")
-KBUILD_CFLAGS   += $(CONFIG_DEBUG_EXTRA_FLAGS)
-endif
-
 LIBGCC_PATH     := \
   $(shell $(CC) $(KBUILD_CFLAGS) $(KCFLAGS) -print-libgcc-file-name)
 
diff --git a/arch/tile/configs/tilegx_defconfig b/arch/tile/configs/tilegx_defconfig
index 4768481..730e40d 100644
--- a/arch/tile/configs/tilegx_defconfig
+++ b/arch/tile/configs/tilegx_defconfig
@@ -1,16 +1,15 @@
 CONFIG_TILEGX=y
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_AUDIT=y
+CONFIG_NO_HZ=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_FHANDLE=y
 CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
 CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_AUDIT=y
 CONFIG_LOG_BUF_SHIFT=19
 CONFIG_CGROUPS=y
 CONFIG_CGROUP_DEBUG=y
@@ -18,18 +17,18 @@ CONFIG_CGROUP_DEVICE=y
 CONFIG_CPUSETS=y
 CONFIG_CGROUP_CPUACCT=y
 CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_MEMCG=y
-CONFIG_CGROUP_MEMCG_SWAP=y
 CONFIG_CGROUP_SCHED=y
 CONFIG_RT_GROUP_SCHED=y
 CONFIG_BLK_CGROUP=y
 CONFIG_NAMESPACES=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_RD_XZ=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
+CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
@@ -45,12 +44,12 @@ CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_SGI_PARTITION=y
 CONFIG_SUN_PARTITION=y
 CONFIG_KARMA_PARTITION=y
-CONFIG_EFI_PARTITION=y
 CONFIG_CFQ_GROUP_IOSCHED=y
 CONFIG_NR_CPUS=100
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_HZ_100=y
+# CONFIG_COMPACTION is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_TILE_PCI_IO=y
 CONFIG_PCI_DEBUG=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_MISC=y
@@ -108,150 +107,9 @@ CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_MROUTE=y
 CONFIG_IPV6_PIMSM_V2=y
 CONFIG_NETLABEL=y
-CONFIG_NETFILTER=y
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_ZONES=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NETFILTER_TPROXY=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CT=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_TEE=m
-CONFIG_NETFILTER_XT_TARGET_TPROXY=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_IPVS=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OSF=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_SOCKET=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_IP_VS=m
-CONFIG_IP_VS_IPV6=y
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-CONFIG_IP_VS_PROTO_SCTP=y
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-CONFIG_NF_CONNTRACK_IPV4=m
-# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_SECURITY=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP6_NF_SECURITY=m
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_IP6=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_ULOG=m
-CONFIG_BRIDGE_EBT_NFLOG=m
 CONFIG_RDS=m
 CONFIG_RDS_TCP=m
 CONFIG_BRIDGE=m
-CONFIG_NET_DSA=y
 CONFIG_VLAN_8021Q=m
 CONFIG_VLAN_8021Q_GVRP=y
 CONFIG_PHONET=m
@@ -292,13 +150,13 @@ CONFIG_NET_ACT_POLICE=m
 CONFIG_NET_ACT_GACT=m
 CONFIG_GACT_PROB=y
 CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
 CONFIG_NET_ACT_NAT=m
 CONFIG_NET_ACT_PEDIT=m
 CONFIG_NET_ACT_SIMP=m
 CONFIG_NET_ACT_SKBEDIT=m
 CONFIG_NET_CLS_IND=y
 CONFIG_DCB=y
+CONFIG_DNS_RESOLVER=y
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
@@ -317,10 +175,12 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SAS_ATA=y
+CONFIG_ISCSI_TCP=m
 CONFIG_SCSI_MVSAS=y
 # CONFIG_SCSI_MVSAS_DEBUG is not set
 CONFIG_SCSI_MVSAS_TASKLET=y
 CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
 CONFIG_SATA_SIL24=y
 # CONFIG_ATA_SFF is not set
 CONFIG_MD=y
@@ -343,6 +203,12 @@ CONFIG_DM_MULTIPATH_QL=m
 CONFIG_DM_MULTIPATH_ST=m
 CONFIG_DM_DELAY=m
 CONFIG_DM_UEVENT=y
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_ISCSI_TARGET=m
 CONFIG_FUSION=y
 CONFIG_FUSION_SAS=y
 CONFIG_NETDEVICES=y
@@ -359,42 +225,8 @@ CONFIG_VETH=m
 CONFIG_NET_DSA_MV88E6060=y
 CONFIG_NET_DSA_MV88E6131=y
 CONFIG_NET_DSA_MV88E6123_61_65=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_ADAPTEC is not set
-# CONFIG_NET_VENDOR_ALTEON is not set
-# CONFIG_NET_VENDOR_AMD is not set
-# CONFIG_NET_VENDOR_ATHEROS is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_BROCADE is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_CISCO is not set
-# CONFIG_NET_VENDOR_DEC is not set
-# CONFIG_NET_VENDOR_DLINK is not set
-# CONFIG_NET_VENDOR_EMULEX is not set
-# CONFIG_NET_VENDOR_EXAR is not set
-# CONFIG_NET_VENDOR_HP is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MELLANOX is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_MYRI is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_NVIDIA is not set
-# CONFIG_NET_VENDOR_OKI is not set
-# CONFIG_NET_PACKET_ENGINE is not set
-# CONFIG_NET_VENDOR_QLOGIC is not set
-# CONFIG_NET_VENDOR_REALTEK is not set
-# CONFIG_NET_VENDOR_RDC is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SILAN is not set
-# CONFIG_NET_VENDOR_SIS is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SUN is not set
-# CONFIG_NET_VENDOR_TEHUTI is not set
-# CONFIG_NET_VENDOR_TI is not set
-# CONFIG_TILE_NET is not set
-# CONFIG_NET_VENDOR_VIA is not set
+CONFIG_SKY2=y
+CONFIG_PTP_1588_CLOCK_TILEGX=y
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
@@ -402,6 +234,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
 # CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_TILEGX=y
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_TIMERIOMEM=m
 CONFIG_I2C=y
@@ -410,13 +243,16 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
 # CONFIG_VGA_ARB is not set
-# CONFIG_HID_SUPPORT is not set
+CONFIG_DRM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_MGA=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
 CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
 CONFIG_EDAC=y
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_RTC_CLASS=y
@@ -464,9 +300,8 @@ CONFIG_ECRYPT_FS=m
 CONFIG_CRAMFS=m
 CONFIG_SQUASHFS=m
 CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
+CONFIG_NFS_V4=m
 CONFIG_NFS_V4_1=y
 CONFIG_NFS_FSCACHE=y
 CONFIG_NFSD=m
@@ -519,25 +354,28 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
 CONFIG_DLM_DEBUG=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_REDUCED=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_FS=y
 CONFIG_HEADERS_CHECK=y
+# CONFIG_FRAME_POINTER is not set
+CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
+CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_LOCKUP_DETECTOR=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_INFO_REDUCED=y
-CONFIG_DEBUG_VM=y
-CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_LIST=y
 CONFIG_DEBUG_CREDENTIALS=y
-CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
-CONFIG_DYNAMIC_DEBUG=y
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
 CONFIG_ASYNC_RAID6_TEST=m
-CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_KGDB=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_SECURITYFS=y
@@ -546,7 +384,6 @@ CONFIG_SECURITY_NETWORK_XFRM=y
 CONFIG_SECURITY_SELINUX=y
 CONFIG_SECURITY_SELINUX_BOOTPARAM=y
 CONFIG_SECURITY_SELINUX_DISABLE=y
-CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_PCRYPT=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
@@ -559,14 +396,12 @@ CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_CRC32C=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD128=m
 CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
diff --git a/arch/tile/configs/tilepro_defconfig b/arch/tile/configs/tilepro_defconfig
index dd2b8f0..80fc32e 100644
--- a/arch/tile/configs/tilepro_defconfig
+++ b/arch/tile/configs/tilepro_defconfig
@@ -1,15 +1,14 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_AUDIT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_FHANDLE=y
 CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
 CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_AUDIT=y
 CONFIG_LOG_BUF_SHIFT=19
 CONFIG_CGROUPS=y
 CONFIG_CGROUP_DEBUG=y
@@ -17,14 +16,13 @@ CONFIG_CGROUP_DEVICE=y
 CONFIG_CPUSETS=y
 CONFIG_CGROUP_CPUACCT=y
 CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_MEMCG=y
-CONFIG_CGROUP_MEMCG_SWAP=y
 CONFIG_CGROUP_SCHED=y
 CONFIG_RT_GROUP_SCHED=y
 CONFIG_BLK_CGROUP=y
 CONFIG_NAMESPACES=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_RD_XZ=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
 # CONFIG_COMPAT_BRK is not set
@@ -44,11 +42,10 @@ CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_SGI_PARTITION=y
 CONFIG_SUN_PARTITION=y
 CONFIG_KARMA_PARTITION=y
-CONFIG_EFI_PARTITION=y
 CONFIG_CFQ_GROUP_IOSCHED=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_HZ_100=y
+# CONFIG_COMPACTION is not set
+CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_PCI_DEBUG=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_MISC=y
@@ -122,16 +119,15 @@ CONFIG_NF_CONNTRACK_PPTP=m
 CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NETFILTER_TPROXY=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CT=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_TEE=m
 CONFIG_NETFILTER_XT_TARGET_TPROXY=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
@@ -189,14 +185,12 @@ CONFIG_IP_VS_SED=m
 CONFIG_IP_VS_NQ=m
 CONFIG_NF_CONNTRACK_IPV4=m
 # CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
-CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=y
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=y
 CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -207,8 +201,6 @@ CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
@@ -218,7 +210,6 @@ CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
@@ -249,7 +240,6 @@ CONFIG_BRIDGE_EBT_NFLOG=m
 CONFIG_RDS=m
 CONFIG_RDS_TCP=m
 CONFIG_BRIDGE=m
-CONFIG_NET_DSA=y
 CONFIG_VLAN_8021Q=m
 CONFIG_VLAN_8021Q_GVRP=y
 CONFIG_PHONET=m
@@ -297,6 +287,7 @@ CONFIG_NET_ACT_SIMP=m
 CONFIG_NET_ACT_SKBEDIT=m
 CONFIG_NET_CLS_IND=y
 CONFIG_DCB=y
+CONFIG_DNS_RESOLVER=y
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
@@ -354,40 +345,7 @@ CONFIG_NET_DSA_MV88E6060=y
 CONFIG_NET_DSA_MV88E6131=y
 CONFIG_NET_DSA_MV88E6123_61_65=y
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_ADAPTEC is not set
-# CONFIG_NET_VENDOR_ALTEON is not set
-# CONFIG_NET_VENDOR_AMD is not set
-# CONFIG_NET_VENDOR_ATHEROS is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_BROCADE is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_CISCO is not set
-# CONFIG_NET_VENDOR_DEC is not set
-# CONFIG_NET_VENDOR_DLINK is not set
-# CONFIG_NET_VENDOR_EMULEX is not set
-# CONFIG_NET_VENDOR_EXAR is not set
-# CONFIG_NET_VENDOR_HP is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MELLANOX is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_MYRI is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_NVIDIA is not set
-# CONFIG_NET_VENDOR_OKI is not set
-# CONFIG_NET_PACKET_ENGINE is not set
-# CONFIG_NET_VENDOR_QLOGIC is not set
-# CONFIG_NET_VENDOR_REALTEK is not set
-# CONFIG_NET_VENDOR_RDC is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SILAN is not set
-# CONFIG_NET_VENDOR_SIS is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SUN is not set
-# CONFIG_NET_VENDOR_TEHUTI is not set
-# CONFIG_NET_VENDOR_TI is not set
-# CONFIG_NET_VENDOR_VIA is not set
+CONFIG_E1000E=y
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
@@ -403,7 +361,6 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
 # CONFIG_VGA_ARB is not set
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_EDAC=y
 CONFIG_EDAC_MM_EDAC=y
@@ -448,13 +405,13 @@ CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_HUGETLBFS=y
+CONFIG_CONFIGFS_FS=m
 CONFIG_ECRYPT_FS=m
 CONFIG_CRAMFS=m
 CONFIG_SQUASHFS=m
 CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
+CONFIG_NFS_V4=m
 CONFIG_NFS_V4_1=y
 CONFIG_NFS_FSCACHE=y
 CONFIG_NFSD=m
@@ -508,26 +465,29 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
 CONFIG_DLM_DEBUG=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_REDUCED=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 CONFIG_FRAME_WARN=2048
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_FS=y
 CONFIG_HEADERS_CHECK=y
+# CONFIG_FRAME_POINTER is not set
+CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_LOCKUP_DETECTOR=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_INFO_REDUCED=y
-CONFIG_DEBUG_VM=y
-CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_LIST=y
 CONFIG_DEBUG_CREDENTIALS=y
-CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
-CONFIG_DYNAMIC_DEBUG=y
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
 CONFIG_ASYNC_RAID6_TEST=m
-CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_SECURITYFS=y
@@ -536,7 +496,6 @@ CONFIG_SECURITY_NETWORK_XFRM=y
 CONFIG_SECURITY_SELINUX=y
 CONFIG_SECURITY_SELINUX_BOOTPARAM=y
 CONFIG_SECURITY_SELINUX_DISABLE=y
-CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_PCRYPT=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
@@ -549,14 +508,12 @@ CONFIG_CRYPTO_XTS=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_CRC32C=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD128=m
 CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
diff --git a/arch/tile/gxio/Kconfig b/arch/tile/gxio/Kconfig
index d221f8d..d4e10d5 100644
--- a/arch/tile/gxio/Kconfig
+++ b/arch/tile/gxio/Kconfig
@@ -26,3 +26,8 @@ config TILE_GXIO_TRIO
 config TILE_GXIO_USB_HOST
 	bool
 	select TILE_GXIO
+
+# Support direct access to the TILE-Gx UART hardware from kernel space.
+config TILE_GXIO_UART
+	bool
+	select TILE_GXIO
diff --git a/arch/tile/gxio/Makefile b/arch/tile/gxio/Makefile
index 8684bca..26ae2c7 100644
--- a/arch/tile/gxio/Makefile
+++ b/arch/tile/gxio/Makefile
@@ -6,4 +6,5 @@ obj-$(CONFIG_TILE_GXIO) += iorpc_globals.o kiorpc.o
 obj-$(CONFIG_TILE_GXIO_DMA) += dma_queue.o
 obj-$(CONFIG_TILE_GXIO_MPIPE) += mpipe.o iorpc_mpipe.o iorpc_mpipe_info.o
 obj-$(CONFIG_TILE_GXIO_TRIO) += trio.o iorpc_trio.o
+obj-$(CONFIG_TILE_GXIO_UART) += uart.o iorpc_uart.o
 obj-$(CONFIG_TILE_GXIO_USB_HOST) += usb_host.o iorpc_usb_host.o
diff --git a/arch/tile/gxio/iorpc_mpipe.c b/arch/tile/gxio/iorpc_mpipe.c
index 31b87bf..e19325c 100644
--- a/arch/tile/gxio/iorpc_mpipe.c
+++ b/arch/tile/gxio/iorpc_mpipe.c
@@ -21,7 +21,7 @@ struct alloc_buffer_stacks_param {
 	unsigned int flags;
 };
 
-int gxio_mpipe_alloc_buffer_stacks(gxio_mpipe_context_t * context,
+int gxio_mpipe_alloc_buffer_stacks(gxio_mpipe_context_t *context,
 				   unsigned int count, unsigned int first,
 				   unsigned int flags)
 {
@@ -45,7 +45,7 @@ struct init_buffer_stack_aux_param {
 	unsigned int buffer_size_enum;
 };
 
-int gxio_mpipe_init_buffer_stack_aux(gxio_mpipe_context_t * context,
+int gxio_mpipe_init_buffer_stack_aux(gxio_mpipe_context_t *context,
 				     void *mem_va, size_t mem_size,
 				     unsigned int mem_flags, unsigned int stack,
 				     unsigned int buffer_size_enum)
@@ -80,7 +80,7 @@ struct alloc_notif_rings_param {
 	unsigned int flags;
 };
 
-int gxio_mpipe_alloc_notif_rings(gxio_mpipe_context_t * context,
+int gxio_mpipe_alloc_notif_rings(gxio_mpipe_context_t *context,
 				 unsigned int count, unsigned int first,
 				 unsigned int flags)
 {
@@ -102,7 +102,7 @@ struct init_notif_ring_aux_param {
 	unsigned int ring;
 };
 
-int gxio_mpipe_init_notif_ring_aux(gxio_mpipe_context_t * context, void *mem_va,
+int gxio_mpipe_init_notif_ring_aux(gxio_mpipe_context_t *context, void *mem_va,
 				   size_t mem_size, unsigned int mem_flags,
 				   unsigned int ring)
 {
@@ -133,7 +133,7 @@ struct request_notif_ring_interrupt_param {
 	unsigned int ring;
 };
 
-int gxio_mpipe_request_notif_ring_interrupt(gxio_mpipe_context_t * context,
+int gxio_mpipe_request_notif_ring_interrupt(gxio_mpipe_context_t *context,
 					    int inter_x, int inter_y,
 					    int inter_ipi, int inter_event,
 					    unsigned int ring)
@@ -158,7 +158,7 @@ struct enable_notif_ring_interrupt_param {
 	unsigned int ring;
 };
 
-int gxio_mpipe_enable_notif_ring_interrupt(gxio_mpipe_context_t * context,
+int gxio_mpipe_enable_notif_ring_interrupt(gxio_mpipe_context_t *context,
 					   unsigned int ring)
 {
 	struct enable_notif_ring_interrupt_param temp;
@@ -179,7 +179,7 @@ struct alloc_notif_groups_param {
 	unsigned int flags;
 };
 
-int gxio_mpipe_alloc_notif_groups(gxio_mpipe_context_t * context,
+int gxio_mpipe_alloc_notif_groups(gxio_mpipe_context_t *context,
 				  unsigned int count, unsigned int first,
 				  unsigned int flags)
 {
@@ -201,7 +201,7 @@ struct init_notif_group_param {
 	gxio_mpipe_notif_group_bits_t bits;
 };
 
-int gxio_mpipe_init_notif_group(gxio_mpipe_context_t * context,
+int gxio_mpipe_init_notif_group(gxio_mpipe_context_t *context,
 				unsigned int group,
 				gxio_mpipe_notif_group_bits_t bits)
 {
@@ -223,7 +223,7 @@ struct alloc_buckets_param {
 	unsigned int flags;
 };
 
-int gxio_mpipe_alloc_buckets(gxio_mpipe_context_t * context, unsigned int count,
+int gxio_mpipe_alloc_buckets(gxio_mpipe_context_t *context, unsigned int count,
 			     unsigned int first, unsigned int flags)
 {
 	struct alloc_buckets_param temp;
@@ -244,7 +244,7 @@ struct init_bucket_param {
 	MPIPE_LBL_INIT_DAT_BSTS_TBL_t bucket_info;
 };
 
-int gxio_mpipe_init_bucket(gxio_mpipe_context_t * context, unsigned int bucket,
+int gxio_mpipe_init_bucket(gxio_mpipe_context_t *context, unsigned int bucket,
 			   MPIPE_LBL_INIT_DAT_BSTS_TBL_t bucket_info)
 {
 	struct init_bucket_param temp;
@@ -265,7 +265,7 @@ struct alloc_edma_rings_param {
 	unsigned int flags;
 };
 
-int gxio_mpipe_alloc_edma_rings(gxio_mpipe_context_t * context,
+int gxio_mpipe_alloc_edma_rings(gxio_mpipe_context_t *context,
 				unsigned int count, unsigned int first,
 				unsigned int flags)
 {
@@ -288,7 +288,7 @@ struct init_edma_ring_aux_param {
 	unsigned int channel;
 };
 
-int gxio_mpipe_init_edma_ring_aux(gxio_mpipe_context_t * context, void *mem_va,
+int gxio_mpipe_init_edma_ring_aux(gxio_mpipe_context_t *context, void *mem_va,
 				  size_t mem_size, unsigned int mem_flags,
 				  unsigned int ring, unsigned int channel)
 {
@@ -315,7 +315,7 @@ int gxio_mpipe_init_edma_ring_aux(gxio_mpipe_context_t * context, void *mem_va,
 EXPORT_SYMBOL(gxio_mpipe_init_edma_ring_aux);
 
 
-int gxio_mpipe_commit_rules(gxio_mpipe_context_t * context, const void *blob,
+int gxio_mpipe_commit_rules(gxio_mpipe_context_t *context, const void *blob,
 			    size_t blob_size)
 {
 	const void *params = blob;
@@ -332,7 +332,7 @@ struct register_client_memory_param {
 	unsigned int flags;
 };
 
-int gxio_mpipe_register_client_memory(gxio_mpipe_context_t * context,
+int gxio_mpipe_register_client_memory(gxio_mpipe_context_t *context,
 				      unsigned int iotlb, HV_PTE pte,
 				      unsigned int flags)
 {
@@ -355,7 +355,7 @@ struct link_open_aux_param {
 	unsigned int flags;
 };
 
-int gxio_mpipe_link_open_aux(gxio_mpipe_context_t * context,
+int gxio_mpipe_link_open_aux(gxio_mpipe_context_t *context,
 			     _gxio_mpipe_link_name_t name, unsigned int flags)
 {
 	struct link_open_aux_param temp;
@@ -374,7 +374,7 @@ struct link_close_aux_param {
 	int mac;
 };
 
-int gxio_mpipe_link_close_aux(gxio_mpipe_context_t * context, int mac)
+int gxio_mpipe_link_close_aux(gxio_mpipe_context_t *context, int mac)
 {
 	struct link_close_aux_param temp;
 	struct link_close_aux_param *params = &temp;
@@ -387,6 +387,27 @@ int gxio_mpipe_link_close_aux(gxio_mpipe_context_t * context, int mac)
 
 EXPORT_SYMBOL(gxio_mpipe_link_close_aux);
 
+struct link_set_attr_aux_param {
+	int mac;
+	uint32_t attr;
+	int64_t val;
+};
+
+int gxio_mpipe_link_set_attr_aux(gxio_mpipe_context_t *context, int mac,
+				 uint32_t attr, int64_t val)
+{
+	struct link_set_attr_aux_param temp;
+	struct link_set_attr_aux_param *params = &temp;
+
+	params->mac = mac;
+	params->attr = attr;
+	params->val = val;
+
+	return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params,
+			     sizeof(*params), GXIO_MPIPE_OP_LINK_SET_ATTR_AUX);
+}
+
+EXPORT_SYMBOL(gxio_mpipe_link_set_attr_aux);
 
 struct get_timestamp_aux_param {
 	uint64_t sec;
@@ -394,8 +415,8 @@ struct get_timestamp_aux_param {
 	uint64_t cycles;
 };
 
-int gxio_mpipe_get_timestamp_aux(gxio_mpipe_context_t * context, uint64_t * sec,
-				 uint64_t * nsec, uint64_t * cycles)
+int gxio_mpipe_get_timestamp_aux(gxio_mpipe_context_t *context, uint64_t *sec,
+				 uint64_t *nsec, uint64_t *cycles)
 {
 	int __result;
 	struct get_timestamp_aux_param temp;
@@ -419,7 +440,7 @@ struct set_timestamp_aux_param {
 	uint64_t cycles;
 };
 
-int gxio_mpipe_set_timestamp_aux(gxio_mpipe_context_t * context, uint64_t sec,
+int gxio_mpipe_set_timestamp_aux(gxio_mpipe_context_t *context, uint64_t sec,
 				 uint64_t nsec, uint64_t cycles)
 {
 	struct set_timestamp_aux_param temp;
@@ -439,8 +460,7 @@ struct adjust_timestamp_aux_param {
 	int64_t nsec;
 };
 
-int gxio_mpipe_adjust_timestamp_aux(gxio_mpipe_context_t * context,
-				    int64_t nsec)
+int gxio_mpipe_adjust_timestamp_aux(gxio_mpipe_context_t *context, int64_t nsec)
 {
 	struct adjust_timestamp_aux_param temp;
 	struct adjust_timestamp_aux_param *params = &temp;
@@ -454,11 +474,55 @@ int gxio_mpipe_adjust_timestamp_aux(gxio_mpipe_context_t * context,
 
 EXPORT_SYMBOL(gxio_mpipe_adjust_timestamp_aux);
 
+struct config_edma_ring_blks_param {
+	unsigned int ering;
+	unsigned int max_blks;
+	unsigned int min_snf_blks;
+	unsigned int db;
+};
+
+int gxio_mpipe_config_edma_ring_blks(gxio_mpipe_context_t *context,
+				     unsigned int ering, unsigned int max_blks,
+				     unsigned int min_snf_blks, unsigned int db)
+{
+	struct config_edma_ring_blks_param temp;
+	struct config_edma_ring_blks_param *params = &temp;
+
+	params->ering = ering;
+	params->max_blks = max_blks;
+	params->min_snf_blks = min_snf_blks;
+	params->db = db;
+
+	return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params,
+			     sizeof(*params),
+			     GXIO_MPIPE_OP_CONFIG_EDMA_RING_BLKS);
+}
+
+EXPORT_SYMBOL(gxio_mpipe_config_edma_ring_blks);
+
+struct adjust_timestamp_freq_param {
+	int32_t ppb;
+};
+
+int gxio_mpipe_adjust_timestamp_freq(gxio_mpipe_context_t *context, int32_t ppb)
+{
+	struct adjust_timestamp_freq_param temp;
+	struct adjust_timestamp_freq_param *params = &temp;
+
+	params->ppb = ppb;
+
+	return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params,
+			     sizeof(*params),
+			     GXIO_MPIPE_OP_ADJUST_TIMESTAMP_FREQ);
+}
+
+EXPORT_SYMBOL(gxio_mpipe_adjust_timestamp_freq);
+
 struct arm_pollfd_param {
 	union iorpc_pollfd pollfd;
 };
 
-int gxio_mpipe_arm_pollfd(gxio_mpipe_context_t * context, int pollfd_cookie)
+int gxio_mpipe_arm_pollfd(gxio_mpipe_context_t *context, int pollfd_cookie)
 {
 	struct arm_pollfd_param temp;
 	struct arm_pollfd_param *params = &temp;
@@ -475,7 +539,7 @@ struct close_pollfd_param {
 	union iorpc_pollfd pollfd;
 };
 
-int gxio_mpipe_close_pollfd(gxio_mpipe_context_t * context, int pollfd_cookie)
+int gxio_mpipe_close_pollfd(gxio_mpipe_context_t *context, int pollfd_cookie)
 {
 	struct close_pollfd_param temp;
 	struct close_pollfd_param *params = &temp;
@@ -492,7 +556,7 @@ struct get_mmio_base_param {
 	HV_PTE base;
 };
 
-int gxio_mpipe_get_mmio_base(gxio_mpipe_context_t * context, HV_PTE *base)
+int gxio_mpipe_get_mmio_base(gxio_mpipe_context_t *context, HV_PTE *base)
 {
 	int __result;
 	struct get_mmio_base_param temp;
@@ -513,7 +577,7 @@ struct check_mmio_offset_param {
 	unsigned long size;
 };
 
-int gxio_mpipe_check_mmio_offset(gxio_mpipe_context_t * context,
+int gxio_mpipe_check_mmio_offset(gxio_mpipe_context_t *context,
 				 unsigned long offset, unsigned long size)
 {
 	struct check_mmio_offset_param temp;
diff --git a/arch/tile/gxio/iorpc_mpipe_info.c b/arch/tile/gxio/iorpc_mpipe_info.c
index d0254aa..77019c6 100644
--- a/arch/tile/gxio/iorpc_mpipe_info.c
+++ b/arch/tile/gxio/iorpc_mpipe_info.c
@@ -15,16 +15,33 @@
 /* This file is machine-generated; DO NOT EDIT! */
 #include "gxio/iorpc_mpipe_info.h"
 
+struct instance_aux_param {
+	_gxio_mpipe_link_name_t name;
+};
+
+int gxio_mpipe_info_instance_aux(gxio_mpipe_info_context_t *context,
+				 _gxio_mpipe_link_name_t name)
+{
+	struct instance_aux_param temp;
+	struct instance_aux_param *params = &temp;
+
+	params->name = name;
+
+	return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params,
+			     sizeof(*params), GXIO_MPIPE_INFO_OP_INSTANCE_AUX);
+}
+
+EXPORT_SYMBOL(gxio_mpipe_info_instance_aux);
 
 struct enumerate_aux_param {
 	_gxio_mpipe_link_name_t name;
 	_gxio_mpipe_link_mac_t mac;
 };
 
-int gxio_mpipe_info_enumerate_aux(gxio_mpipe_info_context_t * context,
+int gxio_mpipe_info_enumerate_aux(gxio_mpipe_info_context_t *context,
 				  unsigned int idx,
-				  _gxio_mpipe_link_name_t * name,
-				  _gxio_mpipe_link_mac_t * mac)
+				  _gxio_mpipe_link_name_t *name,
+				  _gxio_mpipe_link_mac_t *mac)
 {
 	int __result;
 	struct enumerate_aux_param temp;
@@ -32,7 +49,7 @@ int gxio_mpipe_info_enumerate_aux(gxio_mpipe_info_context_t * context,
 
 	__result =
 	    hv_dev_pread(context->fd, 0, (HV_VirtAddr) params, sizeof(*params),
-			 (((uint64_t) idx << 32) |
+			 (((uint64_t)idx << 32) |
 			  GXIO_MPIPE_INFO_OP_ENUMERATE_AUX));
 	*name = params->name;
 	*mac = params->mac;
@@ -46,7 +63,7 @@ struct get_mmio_base_param {
 	HV_PTE base;
 };
 
-int gxio_mpipe_info_get_mmio_base(gxio_mpipe_info_context_t * context,
+int gxio_mpipe_info_get_mmio_base(gxio_mpipe_info_context_t *context,
 				  HV_PTE *base)
 {
 	int __result;
@@ -68,7 +85,7 @@ struct check_mmio_offset_param {
 	unsigned long size;
 };
 
-int gxio_mpipe_info_check_mmio_offset(gxio_mpipe_info_context_t * context,
+int gxio_mpipe_info_check_mmio_offset(gxio_mpipe_info_context_t *context,
 				      unsigned long offset, unsigned long size)
 {
 	struct check_mmio_offset_param temp;
diff --git a/arch/tile/gxio/iorpc_trio.c b/arch/tile/gxio/iorpc_trio.c
index cef4b22..1d3cedb 100644
--- a/arch/tile/gxio/iorpc_trio.c
+++ b/arch/tile/gxio/iorpc_trio.c
@@ -21,7 +21,7 @@ struct alloc_asids_param {
 	unsigned int flags;
 };
 
-int gxio_trio_alloc_asids(gxio_trio_context_t * context, unsigned int count,
+int gxio_trio_alloc_asids(gxio_trio_context_t *context, unsigned int count,
 			  unsigned int first, unsigned int flags)
 {
 	struct alloc_asids_param temp;
@@ -44,7 +44,7 @@ struct alloc_memory_maps_param {
 	unsigned int flags;
 };
 
-int gxio_trio_alloc_memory_maps(gxio_trio_context_t * context,
+int gxio_trio_alloc_memory_maps(gxio_trio_context_t *context,
 				unsigned int count, unsigned int first,
 				unsigned int flags)
 {
@@ -61,6 +61,29 @@ int gxio_trio_alloc_memory_maps(gxio_trio_context_t * context,
 
 EXPORT_SYMBOL(gxio_trio_alloc_memory_maps);
 
+struct alloc_scatter_queues_param {
+	unsigned int count;
+	unsigned int first;
+	unsigned int flags;
+};
+
+int gxio_trio_alloc_scatter_queues(gxio_trio_context_t *context,
+				   unsigned int count, unsigned int first,
+				   unsigned int flags)
+{
+	struct alloc_scatter_queues_param temp;
+	struct alloc_scatter_queues_param *params = &temp;
+
+	params->count = count;
+	params->first = first;
+	params->flags = flags;
+
+	return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params,
+			     sizeof(*params),
+			     GXIO_TRIO_OP_ALLOC_SCATTER_QUEUES);
+}
+
+EXPORT_SYMBOL(gxio_trio_alloc_scatter_queues);
 
 struct alloc_pio_regions_param {
 	unsigned int count;
@@ -68,7 +91,7 @@ struct alloc_pio_regions_param {
 	unsigned int flags;
 };
 
-int gxio_trio_alloc_pio_regions(gxio_trio_context_t * context,
+int gxio_trio_alloc_pio_regions(gxio_trio_context_t *context,
 				unsigned int count, unsigned int first,
 				unsigned int flags)
 {
@@ -92,7 +115,7 @@ struct init_pio_region_aux_param {
 	unsigned int flags;
 };
 
-int gxio_trio_init_pio_region_aux(gxio_trio_context_t * context,
+int gxio_trio_init_pio_region_aux(gxio_trio_context_t *context,
 				  unsigned int pio_region, unsigned int mac,
 				  uint32_t bus_address_hi, unsigned int flags)
 {
@@ -122,7 +145,7 @@ struct init_memory_map_mmu_aux_param {
 	unsigned int order_mode;
 };
 
-int gxio_trio_init_memory_map_mmu_aux(gxio_trio_context_t * context,
+int gxio_trio_init_memory_map_mmu_aux(gxio_trio_context_t *context,
 				      unsigned int map, unsigned long va,
 				      uint64_t size, unsigned int asid,
 				      unsigned int mac, uint64_t bus_address,
@@ -152,7 +175,7 @@ struct get_port_property_param {
 	struct pcie_trio_ports_property trio_ports;
 };
 
-int gxio_trio_get_port_property(gxio_trio_context_t * context,
+int gxio_trio_get_port_property(gxio_trio_context_t *context,
 				struct pcie_trio_ports_property *trio_ports)
 {
 	int __result;
@@ -175,7 +198,7 @@ struct config_legacy_intr_param {
 	unsigned int intx;
 };
 
-int gxio_trio_config_legacy_intr(gxio_trio_context_t * context, int inter_x,
+int gxio_trio_config_legacy_intr(gxio_trio_context_t *context, int inter_x,
 				 int inter_y, int inter_ipi, int inter_event,
 				 unsigned int mac, unsigned int intx)
 {
@@ -204,7 +227,7 @@ struct config_msi_intr_param {
 	unsigned int asid;
 };
 
-int gxio_trio_config_msi_intr(gxio_trio_context_t * context, int inter_x,
+int gxio_trio_config_msi_intr(gxio_trio_context_t *context, int inter_x,
 			      int inter_y, int inter_ipi, int inter_event,
 			      unsigned int mac, unsigned int mem_map,
 			      uint64_t mem_map_base, uint64_t mem_map_limit,
@@ -236,7 +259,7 @@ struct set_mps_mrs_param {
 	unsigned int mac;
 };
 
-int gxio_trio_set_mps_mrs(gxio_trio_context_t * context, uint16_t mps,
+int gxio_trio_set_mps_mrs(gxio_trio_context_t *context, uint16_t mps,
 			  uint16_t mrs, unsigned int mac)
 {
 	struct set_mps_mrs_param temp;
@@ -256,7 +279,7 @@ struct force_rc_link_up_param {
 	unsigned int mac;
 };
 
-int gxio_trio_force_rc_link_up(gxio_trio_context_t * context, unsigned int mac)
+int gxio_trio_force_rc_link_up(gxio_trio_context_t *context, unsigned int mac)
 {
 	struct force_rc_link_up_param temp;
 	struct force_rc_link_up_param *params = &temp;
@@ -273,7 +296,7 @@ struct force_ep_link_up_param {
 	unsigned int mac;
 };
 
-int gxio_trio_force_ep_link_up(gxio_trio_context_t * context, unsigned int mac)
+int gxio_trio_force_ep_link_up(gxio_trio_context_t *context, unsigned int mac)
 {
 	struct force_ep_link_up_param temp;
 	struct force_ep_link_up_param *params = &temp;
@@ -290,7 +313,7 @@ struct get_mmio_base_param {
 	HV_PTE base;
 };
 
-int gxio_trio_get_mmio_base(gxio_trio_context_t * context, HV_PTE *base)
+int gxio_trio_get_mmio_base(gxio_trio_context_t *context, HV_PTE *base)
 {
 	int __result;
 	struct get_mmio_base_param temp;
@@ -311,7 +334,7 @@ struct check_mmio_offset_param {
 	unsigned long size;
 };
 
-int gxio_trio_check_mmio_offset(gxio_trio_context_t * context,
+int gxio_trio_check_mmio_offset(gxio_trio_context_t *context,
 				unsigned long offset, unsigned long size)
 {
 	struct check_mmio_offset_param temp;
diff --git a/arch/tile/gxio/iorpc_uart.c b/arch/tile/gxio/iorpc_uart.c
new file mode 100644
index 0000000..b9a6d61
--- /dev/null
+++ b/arch/tile/gxio/iorpc_uart.c
@@ -0,0 +1,77 @@
+/*
+ * Copyright 2013 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/* This file is machine-generated; DO NOT EDIT! */
+#include "gxio/iorpc_uart.h"
+
+struct cfg_interrupt_param {
+	union iorpc_interrupt interrupt;
+};
+
+int gxio_uart_cfg_interrupt(gxio_uart_context_t *context, int inter_x,
+			    int inter_y, int inter_ipi, int inter_event)
+{
+	struct cfg_interrupt_param temp;
+	struct cfg_interrupt_param *params = &temp;
+
+	params->interrupt.kernel.x = inter_x;
+	params->interrupt.kernel.y = inter_y;
+	params->interrupt.kernel.ipi = inter_ipi;
+	params->interrupt.kernel.event = inter_event;
+
+	return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params,
+			     sizeof(*params), GXIO_UART_OP_CFG_INTERRUPT);
+}
+
+EXPORT_SYMBOL(gxio_uart_cfg_interrupt);
+
+struct get_mmio_base_param {
+	HV_PTE base;
+};
+
+int gxio_uart_get_mmio_base(gxio_uart_context_t *context, HV_PTE *base)
+{
+	int __result;
+	struct get_mmio_base_param temp;
+	struct get_mmio_base_param *params = &temp;
+
+	__result =
+	    hv_dev_pread(context->fd, 0, (HV_VirtAddr) params, sizeof(*params),
+			 GXIO_UART_OP_GET_MMIO_BASE);
+	*base = params->base;
+
+	return __result;
+}
+
+EXPORT_SYMBOL(gxio_uart_get_mmio_base);
+
+struct check_mmio_offset_param {
+	unsigned long offset;
+	unsigned long size;
+};
+
+int gxio_uart_check_mmio_offset(gxio_uart_context_t *context,
+				unsigned long offset, unsigned long size)
+{
+	struct check_mmio_offset_param temp;
+	struct check_mmio_offset_param *params = &temp;
+
+	params->offset = offset;
+	params->size = size;
+
+	return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params,
+			     sizeof(*params), GXIO_UART_OP_CHECK_MMIO_OFFSET);
+}
+
+EXPORT_SYMBOL(gxio_uart_check_mmio_offset);
diff --git a/arch/tile/gxio/iorpc_usb_host.c b/arch/tile/gxio/iorpc_usb_host.c
index cf3c3cc..9c82007 100644
--- a/arch/tile/gxio/iorpc_usb_host.c
+++ b/arch/tile/gxio/iorpc_usb_host.c
@@ -19,7 +19,7 @@ struct cfg_interrupt_param {
 	union iorpc_interrupt interrupt;
 };
 
-int gxio_usb_host_cfg_interrupt(gxio_usb_host_context_t * context, int inter_x,
+int gxio_usb_host_cfg_interrupt(gxio_usb_host_context_t *context, int inter_x,
 				int inter_y, int inter_ipi, int inter_event)
 {
 	struct cfg_interrupt_param temp;
@@ -41,7 +41,7 @@ struct register_client_memory_param {
 	unsigned int flags;
 };
 
-int gxio_usb_host_register_client_memory(gxio_usb_host_context_t * context,
+int gxio_usb_host_register_client_memory(gxio_usb_host_context_t *context,
 					 HV_PTE pte, unsigned int flags)
 {
 	struct register_client_memory_param temp;
@@ -61,7 +61,7 @@ struct get_mmio_base_param {
 	HV_PTE base;
 };
 
-int gxio_usb_host_get_mmio_base(gxio_usb_host_context_t * context, HV_PTE *base)
+int gxio_usb_host_get_mmio_base(gxio_usb_host_context_t *context, HV_PTE *base)
 {
 	int __result;
 	struct get_mmio_base_param temp;
@@ -82,7 +82,7 @@ struct check_mmio_offset_param {
 	unsigned long size;
 };
 
-int gxio_usb_host_check_mmio_offset(gxio_usb_host_context_t * context,
+int gxio_usb_host_check_mmio_offset(gxio_usb_host_context_t *context,
 				    unsigned long offset, unsigned long size)
 {
 	struct check_mmio_offset_param temp;
diff --git a/arch/tile/gxio/mpipe.c b/arch/tile/gxio/mpipe.c
index e71c633..5301a9f 100644
--- a/arch/tile/gxio/mpipe.c
+++ b/arch/tile/gxio/mpipe.c
@@ -36,8 +36,14 @@ int gxio_mpipe_init(gxio_mpipe_context_t *context, unsigned int mpipe_index)
 	int fd;
 	int i;
 
+	if (mpipe_index >= GXIO_MPIPE_INSTANCE_MAX)
+		return -EINVAL;
+
 	snprintf(file, sizeof(file), "mpipe/%d/iorpc", mpipe_index);
 	fd = hv_dev_open((HV_VirtAddr) file, 0);
+
+	context->fd = fd;
+
 	if (fd < 0) {
 		if (fd >= GXIO_ERR_MIN && fd <= GXIO_ERR_MAX)
 			return fd;
@@ -45,8 +51,6 @@ int gxio_mpipe_init(gxio_mpipe_context_t *context, unsigned int mpipe_index)
 			return -ENODEV;
 	}
 
-	context->fd = fd;
-
 	/* Map in the MMIO space. */
 	context->mmio_cfg_base = (void __force *)
 		iorpc_ioremap(fd, HV_MPIPE_CONFIG_MMIO_OFFSET,
@@ -64,12 +68,15 @@ int gxio_mpipe_init(gxio_mpipe_context_t *context, unsigned int mpipe_index)
 	for (i = 0; i < 8; i++)
 		context->__stacks.stacks[i] = 255;
 
+	context->instance = mpipe_index;
+
 	return 0;
 
       fast_failed:
 	iounmap((void __force __iomem *)(context->mmio_cfg_base));
       cfg_failed:
 	hv_dev_close(context->fd);
+	context->fd = -1;
 	return -ENODEV;
 }
 
@@ -383,7 +390,7 @@ EXPORT_SYMBOL_GPL(gxio_mpipe_iqueue_init);
 
 int gxio_mpipe_equeue_init(gxio_mpipe_equeue_t *equeue,
 			   gxio_mpipe_context_t *context,
-			   unsigned int edma_ring_id,
+			   unsigned int ering,
 			   unsigned int channel,
 			   void *mem, unsigned int mem_size,
 			   unsigned int mem_flags)
@@ -394,7 +401,7 @@ int gxio_mpipe_equeue_init(gxio_mpipe_equeue_t *equeue,
 	/* Offset used to read number of completed commands. */
 	MPIPE_EDMA_POST_REGION_ADDR_t offset;
 
-	int result = gxio_mpipe_init_edma_ring(context, edma_ring_id, channel,
+	int result = gxio_mpipe_init_edma_ring(context, ering, channel,
 					       mem, mem_size, mem_flags);
 	if (result < 0)
 		return result;
@@ -405,7 +412,7 @@ int gxio_mpipe_equeue_init(gxio_mpipe_equeue_t *equeue,
 	offset.region =
 		MPIPE_MMIO_ADDR__REGION_VAL_EDMA -
 		MPIPE_MMIO_ADDR__REGION_VAL_IDMA;
-	offset.ring = edma_ring_id;
+	offset.ring = ering;
 
 	__gxio_dma_queue_init(&equeue->dma_queue,
 			      context->mmio_fast_base + offset.word,
@@ -413,6 +420,9 @@ int gxio_mpipe_equeue_init(gxio_mpipe_equeue_t *equeue,
 	equeue->edescs = mem;
 	equeue->mask_num_entries = num_entries - 1;
 	equeue->log2_num_entries = __builtin_ctz(num_entries);
+	equeue->context = context;
+	equeue->ering = ering;
+	equeue->channel = channel;
 
 	return 0;
 }
@@ -493,6 +503,20 @@ static gxio_mpipe_context_t *_gxio_get_link_context(void)
 	return contextp;
 }
 
+int gxio_mpipe_link_instance(const char *link_name)
+{
+	_gxio_mpipe_link_name_t name;
+	gxio_mpipe_context_t *context = _gxio_get_link_context();
+
+	if (!context)
+		return GXIO_ERR_NO_DEVICE;
+
+	strncpy(name.name, link_name, sizeof(name.name));
+	name.name[GXIO_MPIPE_LINK_NAME_LEN - 1] = '\0';
+
+	return gxio_mpipe_info_instance_aux(context, name);
+}
+
 int gxio_mpipe_link_enumerate_mac(int idx, char *link_name, uint8_t *link_mac)
 {
 	int rv;
@@ -543,3 +567,12 @@ int gxio_mpipe_link_close(gxio_mpipe_link_t *link)
 }
 
 EXPORT_SYMBOL_GPL(gxio_mpipe_link_close);
+
+int gxio_mpipe_link_set_attr(gxio_mpipe_link_t *link, uint32_t attr,
+			     int64_t val)
+{
+	return gxio_mpipe_link_set_attr_aux(link->context, link->mac, attr,
+					    val);
+}
+
+EXPORT_SYMBOL_GPL(gxio_mpipe_link_set_attr);
diff --git a/arch/tile/gxio/uart.c b/arch/tile/gxio/uart.c
new file mode 100644
index 0000000..ba58517
--- /dev/null
+++ b/arch/tile/gxio/uart.c
@@ -0,0 +1,87 @@
+/*
+ * Copyright 2013 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/*
+ * Implementation of UART gxio calls.
+ */
+
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+
+#include <gxio/uart.h>
+#include <gxio/iorpc_globals.h>
+#include <gxio/iorpc_uart.h>
+#include <gxio/kiorpc.h>
+
+int gxio_uart_init(gxio_uart_context_t *context, int uart_index)
+{
+	char file[32];
+	int fd;
+
+	snprintf(file, sizeof(file), "uart/%d/iorpc", uart_index);
+	fd = hv_dev_open((HV_VirtAddr) file, 0);
+	if (fd < 0) {
+		if (fd >= GXIO_ERR_MIN && fd <= GXIO_ERR_MAX)
+			return fd;
+		else
+			return -ENODEV;
+	}
+
+	context->fd = fd;
+
+	/* Map in the MMIO space. */
+	context->mmio_base = (void __force *)
+		iorpc_ioremap(fd, HV_UART_MMIO_OFFSET, HV_UART_MMIO_SIZE);
+
+	if (context->mmio_base == NULL) {
+		hv_dev_close(context->fd);
+		context->fd = -1;
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+EXPORT_SYMBOL_GPL(gxio_uart_init);
+
+int gxio_uart_destroy(gxio_uart_context_t *context)
+{
+	iounmap((void __force __iomem *)(context->mmio_base));
+	hv_dev_close(context->fd);
+
+	context->mmio_base = NULL;
+	context->fd = -1;
+
+	return 0;
+}
+
+EXPORT_SYMBOL_GPL(gxio_uart_destroy);
+
+/* UART register write wrapper. */
+void gxio_uart_write(gxio_uart_context_t *context, uint64_t offset,
+		     uint64_t word)
+{
+	__gxio_mmio_write(context->mmio_base + offset, word);
+}
+
+EXPORT_SYMBOL_GPL(gxio_uart_write);
+
+/* UART register read wrapper. */
+uint64_t gxio_uart_read(gxio_uart_context_t *context, uint64_t offset)
+{
+	return __gxio_mmio_read(context->mmio_base + offset);
+}
+
+EXPORT_SYMBOL_GPL(gxio_uart_read);
diff --git a/arch/tile/gxio/usb_host.c b/arch/tile/gxio/usb_host.c
index 66b002f..785afad 100644
--- a/arch/tile/gxio/usb_host.c
+++ b/arch/tile/gxio/usb_host.c
@@ -26,7 +26,7 @@
 #include <gxio/kiorpc.h>
 #include <gxio/usb_host.h>
 
-int gxio_usb_host_init(gxio_usb_host_context_t * context, int usb_index,
+int gxio_usb_host_init(gxio_usb_host_context_t *context, int usb_index,
 		       int is_ehci)
 {
 	char file[32];
@@ -63,7 +63,7 @@ int gxio_usb_host_init(gxio_usb_host_context_t * context, int usb_index,
 
 EXPORT_SYMBOL_GPL(gxio_usb_host_init);
 
-int gxio_usb_host_destroy(gxio_usb_host_context_t * context)
+int gxio_usb_host_destroy(gxio_usb_host_context_t *context)
 {
 	iounmap((void __force __iomem *)(context->mmio_base));
 	hv_dev_close(context->fd);
@@ -76,14 +76,14 @@ int gxio_usb_host_destroy(gxio_usb_host_context_t * context)
 
 EXPORT_SYMBOL_GPL(gxio_usb_host_destroy);
 
-void *gxio_usb_host_get_reg_start(gxio_usb_host_context_t * context)
+void *gxio_usb_host_get_reg_start(gxio_usb_host_context_t *context)
 {
 	return context->mmio_base;
 }
 
 EXPORT_SYMBOL_GPL(gxio_usb_host_get_reg_start);
 
-size_t gxio_usb_host_get_reg_len(gxio_usb_host_context_t * context)
+size_t gxio_usb_host_get_reg_len(gxio_usb_host_context_t *context)
 {
 	return HV_USB_HOST_MMIO_SIZE;
 }
diff --git a/arch/tile/include/arch/mpipe.h b/arch/tile/include/arch/mpipe.h
index 8a33912..904538e 100644
--- a/arch/tile/include/arch/mpipe.h
+++ b/arch/tile/include/arch/mpipe.h
@@ -176,7 +176,18 @@ typedef union
      */
     uint_reg_t stack_idx    : 5;
     /* Reserved. */
-    uint_reg_t __reserved_2 : 5;
+    uint_reg_t __reserved_2 : 3;
+    /*
+     * Instance ID.  For devices that support automatic buffer return between
+     * mPIPE instances, this field indicates the buffer owner.  If the INST
+     * field does not match the mPIPE's instance number when a packet is
+     * egressed, buffers with HWB set will be returned to the other mPIPE
+     * instance.  Note that not all devices support multi-mPIPE buffer
+     * return.  The MPIPE_EDMA_INFO.REMOTE_BUFF_RTN_SUPPORT bit indicates
+     * whether the INST field in the buffer descriptor is populated by iDMA
+     * hardware. This field is ignored on writes.
+     */
+    uint_reg_t inst         : 2;
     /*
      * Reads as one to indicate that this is a hardware managed buffer.
      * Ignored on writes since all buffers on a given stack are the same size.
@@ -205,7 +216,8 @@ typedef union
     uint_reg_t c            : 2;
     uint_reg_t size         : 3;
     uint_reg_t hwb          : 1;
-    uint_reg_t __reserved_2 : 5;
+    uint_reg_t inst         : 2;
+    uint_reg_t __reserved_2 : 3;
     uint_reg_t stack_idx    : 5;
     uint_reg_t __reserved_1 : 6;
     int_reg_t va           : 35;
@@ -231,9 +243,9 @@ typedef union
     /* Reserved. */
     uint_reg_t __reserved_0 : 3;
     /* eDMA ring being accessed */
-    uint_reg_t ring         : 5;
+    uint_reg_t ring         : 6;
     /* Reserved. */
-    uint_reg_t __reserved_1 : 18;
+    uint_reg_t __reserved_1 : 17;
     /*
      * This field of the address selects the region (address space) to be
      * accessed.  For the egress DMA post region, this field must be 5.
@@ -250,8 +262,8 @@ typedef union
     uint_reg_t svc_dom      : 5;
     uint_reg_t __reserved_2 : 6;
     uint_reg_t region       : 3;
-    uint_reg_t __reserved_1 : 18;
-    uint_reg_t ring         : 5;
+    uint_reg_t __reserved_1 : 17;
+    uint_reg_t ring         : 6;
     uint_reg_t __reserved_0 : 3;
 #endif
   };
diff --git a/arch/tile/include/arch/mpipe_constants.h b/arch/tile/include/arch/mpipe_constants.h
index 410a040..84022ac5 100644
--- a/arch/tile/include/arch/mpipe_constants.h
+++ b/arch/tile/include/arch/mpipe_constants.h
@@ -16,13 +16,13 @@
 #ifndef __ARCH_MPIPE_CONSTANTS_H__
 #define __ARCH_MPIPE_CONSTANTS_H__
 
-#define MPIPE_NUM_CLASSIFIERS 10
+#define MPIPE_NUM_CLASSIFIERS 16
 #define MPIPE_CLS_MHZ 1200
 
-#define MPIPE_NUM_EDMA_RINGS 32
+#define MPIPE_NUM_EDMA_RINGS 64
 
 #define MPIPE_NUM_SGMII_MACS 16
-#define MPIPE_NUM_XAUI_MACS 4
+#define MPIPE_NUM_XAUI_MACS 16
 #define MPIPE_NUM_LOOPBACK_CHANNELS 4
 #define MPIPE_NUM_NON_LB_CHANNELS 28
 
diff --git a/arch/tile/include/arch/mpipe_shm.h b/arch/tile/include/arch/mpipe_shm.h
index f2e9e12..13b3c43 100644
--- a/arch/tile/include/arch/mpipe_shm.h
+++ b/arch/tile/include/arch/mpipe_shm.h
@@ -44,8 +44,14 @@ typedef union
      * descriptors toggles each time the ring tail pointer wraps.
      */
     uint_reg_t gen        : 1;
+    /**
+     * For devices with EDMA reorder support, this field allows the
+     * descriptor to select the egress FIFO.  The associated DMA ring must
+     * have ALLOW_EFIFO_SEL enabled.
+     */
+    uint_reg_t efifo_sel  : 6;
     /** Reserved.  Must be zero. */
-    uint_reg_t r0         : 7;
+    uint_reg_t r0         : 1;
     /** Checksum generation enabled for this transfer. */
     uint_reg_t csum       : 1;
     /**
@@ -110,7 +116,8 @@ typedef union
     uint_reg_t notif      : 1;
     uint_reg_t ns         : 1;
     uint_reg_t csum       : 1;
-    uint_reg_t r0         : 7;
+    uint_reg_t r0         : 1;
+    uint_reg_t efifo_sel  : 6;
     uint_reg_t gen        : 1;
 #endif
 
@@ -126,14 +133,16 @@ typedef union
     /** Reserved. */
     uint_reg_t __reserved_1 : 3;
     /**
-     * Instance ID.  For devices that support more than one mPIPE instance,
-     * this field indicates the buffer owner.  If the INST field does not
-     * match the mPIPE's instance number when a packet is egressed, buffers
-     * with HWB set will be returned to the other mPIPE instance.
+     * Instance ID.  For devices that support automatic buffer return between
+     * mPIPE instances, this field indicates the buffer owner.  If the INST
+     * field does not match the mPIPE's instance number when a packet is
+     * egressed, buffers with HWB set will be returned to the other mPIPE
+     * instance.  Note that not all devices support multi-mPIPE buffer
+     * return.  The MPIPE_EDMA_INFO.REMOTE_BUFF_RTN_SUPPORT bit indicates
+     * whether the INST field in the buffer descriptor is populated by iDMA
+     * hardware.
      */
-    uint_reg_t inst         : 1;
-    /** Reserved. */
-    uint_reg_t __reserved_2 : 1;
+    uint_reg_t inst         : 2;
     /**
      * Always set to one by hardware in iDMA packet descriptors.  For eDMA,
      * indicates whether the buffer will be released to the buffer stack
@@ -166,8 +175,7 @@ typedef union
     uint_reg_t c            : 2;
     uint_reg_t size         : 3;
     uint_reg_t hwb          : 1;
-    uint_reg_t __reserved_2 : 1;
-    uint_reg_t inst         : 1;
+    uint_reg_t inst         : 2;
     uint_reg_t __reserved_1 : 3;
     uint_reg_t stack_idx    : 5;
     uint_reg_t __reserved_0 : 6;
@@ -408,7 +416,10 @@ typedef union
     /**
      * Sequence number applied when packet is distributed.   Classifier
      * selects which sequence number is to be applied by writing the 13-bit
-     * SQN-selector into this field.
+     * SQN-selector into this field.  For devices that support EXT_SQN (as
+     * indicated in IDMA_INFO.EXT_SQN_SUPPORT), the GP_SQN can be extended to
+     * 32-bits via the IDMA_CTL.EXT_SQN register.  In this case the
+     * PACKET_SQN will be reduced to 32 bits.
      */
     uint_reg_t gp_sqn     : 16;
     /**
@@ -451,14 +462,16 @@ typedef union
     /** Reserved. */
     uint_reg_t __reserved_5 : 3;
     /**
-     * Instance ID.  For devices that support more than one mPIPE instance,
-     * this field indicates the buffer owner.  If the INST field does not
-     * match the mPIPE's instance number when a packet is egressed, buffers
-     * with HWB set will be returned to the other mPIPE instance.
+     * Instance ID.  For devices that support automatic buffer return between
+     * mPIPE instances, this field indicates the buffer owner.  If the INST
+     * field does not match the mPIPE's instance number when a packet is
+     * egressed, buffers with HWB set will be returned to the other mPIPE
+     * instance.  Note that not all devices support multi-mPIPE buffer
+     * return.  The MPIPE_EDMA_INFO.REMOTE_BUFF_RTN_SUPPORT bit indicates
+     * whether the INST field in the buffer descriptor is populated by iDMA
+     * hardware.
      */
-    uint_reg_t inst         : 1;
-    /** Reserved. */
-    uint_reg_t __reserved_6 : 1;
+    uint_reg_t inst         : 2;
     /**
      * Always set to one by hardware in iDMA packet descriptors.  For eDMA,
      * indicates whether the buffer will be released to the buffer stack
@@ -491,8 +504,7 @@ typedef union
     uint_reg_t c            : 2;
     uint_reg_t size         : 3;
     uint_reg_t hwb          : 1;
-    uint_reg_t __reserved_6 : 1;
-    uint_reg_t inst         : 1;
+    uint_reg_t inst         : 2;
     uint_reg_t __reserved_5 : 3;
     uint_reg_t stack_idx    : 5;
     uint_reg_t __reserved_4 : 6;
diff --git a/arch/tile/include/arch/trio.h b/arch/tile/include/arch/trio.h
index d3000a8..c0ddedc 100644
--- a/arch/tile/include/arch/trio.h
+++ b/arch/tile/include/arch/trio.h
@@ -23,6 +23,45 @@
 #ifndef __ASSEMBLER__
 
 /*
+ * Map SQ Doorbell Format.
+ * This describes the format of the write-only doorbell register that exists
+ * in the last 8-bytes of the MAP_SQ_BASE/LIM range.  This register is only
+ * writable from PCIe space.  Writes to this register will not be written to
+ * Tile memory space and thus no IO VA translation is required if the last
+ * page of the BASE/LIM range is not otherwise written.
+ */
+
+__extension__
+typedef union
+{
+  struct
+  {
+#ifndef __BIG_ENDIAN__
+    /*
+     * When written with a 1, the associated MAP_SQ region's doorbell
+     * interrupt will be triggered once all previous writes are visible to
+     * Tile software.
+     */
+    uint_reg_t doorbell   : 1;
+    /*
+     * When written with a 1, the descriptor at the head of the associated
+     * MAP_SQ's FIFO will be dequeued.
+     */
+    uint_reg_t pop        : 1;
+    /* Reserved. */
+    uint_reg_t __reserved : 62;
+#else   /* __BIG_ENDIAN__ */
+    uint_reg_t __reserved : 62;
+    uint_reg_t pop        : 1;
+    uint_reg_t doorbell   : 1;
+#endif
+  };
+
+  uint_reg_t word;
+} TRIO_MAP_SQ_DOORBELL_FMT_t;
+
+
+/*
  * Tile PIO Region Configuration - CFG Address Format.
  * This register describes the address format for PIO accesses when the
  * associated region is setup with TYPE=CFG.
diff --git a/arch/tile/include/arch/trio_constants.h b/arch/tile/include/arch/trio_constants.h
index 628b045..85647e9 100644
--- a/arch/tile/include/arch/trio_constants.h
+++ b/arch/tile/include/arch/trio_constants.h
@@ -16,21 +16,21 @@
 #ifndef __ARCH_TRIO_CONSTANTS_H__
 #define __ARCH_TRIO_CONSTANTS_H__
 
-#define TRIO_NUM_ASIDS 16
+#define TRIO_NUM_ASIDS 32
 #define TRIO_NUM_TLBS_PER_ASID 16
 
 #define TRIO_NUM_TPIO_REGIONS 8
 #define TRIO_LOG2_NUM_TPIO_REGIONS 3
 
-#define TRIO_NUM_MAP_MEM_REGIONS 16
-#define TRIO_LOG2_NUM_MAP_MEM_REGIONS 4
+#define TRIO_NUM_MAP_MEM_REGIONS 32
+#define TRIO_LOG2_NUM_MAP_MEM_REGIONS 5
 #define TRIO_NUM_MAP_SQ_REGIONS 8
 #define TRIO_LOG2_NUM_MAP_SQ_REGIONS 3
 
 #define TRIO_LOG2_NUM_SQ_FIFO_ENTRIES 6
 
-#define TRIO_NUM_PUSH_DMA_RINGS 32
+#define TRIO_NUM_PUSH_DMA_RINGS 64
 
-#define TRIO_NUM_PULL_DMA_RINGS 32
+#define TRIO_NUM_PULL_DMA_RINGS 64
 
 #endif /* __ARCH_TRIO_CONSTANTS_H__ */
diff --git a/arch/tile/include/arch/uart.h b/arch/tile/include/arch/uart.h
new file mode 100644
index 0000000..0796697
--- /dev/null
+++ b/arch/tile/include/arch/uart.h
@@ -0,0 +1,300 @@
+/*
+ * Copyright 2013 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/* Machine-generated file; do not edit. */
+
+#ifndef __ARCH_UART_H__
+#define __ARCH_UART_H__
+
+#include <arch/abi.h>
+#include <arch/uart_def.h>
+
+#ifndef __ASSEMBLER__
+
+/* Divisor. */
+
+__extension__
+typedef union
+{
+  struct
+  {
+#ifndef __BIG_ENDIAN__
+    /*
+     * Baud Rate Divisor.  Desired_baud_rate = REF_CLK frequency / (baud *
+     * 16).
+     *                       Note: REF_CLK is always 125 MHz, the default
+     * divisor = 68, baud rate = 125M/(68*16) = 115200 baud.
+     */
+    uint_reg_t divisor    : 12;
+    /* Reserved. */
+    uint_reg_t __reserved : 52;
+#else   /* __BIG_ENDIAN__ */
+    uint_reg_t __reserved : 52;
+    uint_reg_t divisor    : 12;
+#endif
+  };
+
+  uint_reg_t word;
+} UART_DIVISOR_t;
+
+/* FIFO Count. */
+
+__extension__
+typedef union
+{
+  struct
+  {
+#ifndef __BIG_ENDIAN__
+    /*
+     * n: n active entries in the receive FIFO (max is 2**8). Each entry has
+     * 8 bits.
+     * 0: no active entry in the receive FIFO (that is empty).
+     */
+    uint_reg_t rfifo_count  : 9;
+    /* Reserved. */
+    uint_reg_t __reserved_0 : 7;
+    /*
+     * n: n active entries in the transmit FIFO (max is 2**8). Each entry has
+     * 8 bits.
+     * 0: no active entry in the transmit FIFO (that is empty).
+     */
+    uint_reg_t tfifo_count  : 9;
+    /* Reserved. */
+    uint_reg_t __reserved_1 : 7;
+    /*
+     * n: n active entries in the write FIFO (max is 2**2). Each entry has 8
+     * bits.
+     * 0: no active entry in the write FIFO (that is empty).
+     */
+    uint_reg_t wfifo_count  : 3;
+    /* Reserved. */
+    uint_reg_t __reserved_2 : 29;
+#else   /* __BIG_ENDIAN__ */
+    uint_reg_t __reserved_2 : 29;
+    uint_reg_t wfifo_count  : 3;
+    uint_reg_t __reserved_1 : 7;
+    uint_reg_t tfifo_count  : 9;
+    uint_reg_t __reserved_0 : 7;
+    uint_reg_t rfifo_count  : 9;
+#endif
+  };
+
+  uint_reg_t word;
+} UART_FIFO_COUNT_t;
+
+/* FLAG. */
+
+__extension__
+typedef union
+{
+  struct
+  {
+#ifndef __BIG_ENDIAN__
+    /* Reserved. */
+    uint_reg_t __reserved_0 : 1;
+    /* 1: receive FIFO is empty */
+    uint_reg_t rfifo_empty  : 1;
+    /* 1: write FIFO is empty. */
+    uint_reg_t wfifo_empty  : 1;
+    /* 1: transmit FIFO is empty. */
+    uint_reg_t tfifo_empty  : 1;
+    /* 1: receive FIFO is full. */
+    uint_reg_t rfifo_full   : 1;
+    /* 1: write FIFO is full. */
+    uint_reg_t wfifo_full   : 1;
+    /* 1: transmit FIFO is full. */
+    uint_reg_t tfifo_full   : 1;
+    /* Reserved. */
+    uint_reg_t __reserved_1 : 57;
+#else   /* __BIG_ENDIAN__ */
+    uint_reg_t __reserved_1 : 57;
+    uint_reg_t tfifo_full   : 1;
+    uint_reg_t wfifo_full   : 1;
+    uint_reg_t rfifo_full   : 1;
+    uint_reg_t tfifo_empty  : 1;
+    uint_reg_t wfifo_empty  : 1;
+    uint_reg_t rfifo_empty  : 1;
+    uint_reg_t __reserved_0 : 1;
+#endif
+  };
+
+  uint_reg_t word;
+} UART_FLAG_t;
+
+/*
+ * Interrupt Vector Mask.
+ * Each bit in this register corresponds to a specific interrupt. When set,
+ * the associated interrupt will not be dispatched.
+ */
+
+__extension__
+typedef union
+{
+  struct
+  {
+#ifndef __BIG_ENDIAN__
+    /* Read data FIFO read and no data available */
+    uint_reg_t rdat_err       : 1;
+    /* Write FIFO was written but it was full */
+    uint_reg_t wdat_err       : 1;
+    /* Stop bit not found when current data was received */
+    uint_reg_t frame_err      : 1;
+    /* Parity error was detected when current data was received */
+    uint_reg_t parity_err     : 1;
+    /* Data was received but the receive FIFO was full */
+    uint_reg_t rfifo_overflow : 1;
+    /*
+     * An almost full event is reached when data is to be written to the
+     * receive FIFO, and the receive FIFO has more than or equal to
+     * BUFFER_THRESHOLD.RFIFO_AFULL bytes.
+     */
+    uint_reg_t rfifo_afull    : 1;
+    /* Reserved. */
+    uint_reg_t __reserved_0   : 1;
+    /* An entry in the transmit FIFO was popped */
+    uint_reg_t tfifo_re       : 1;
+    /* An entry has been pushed into the receive FIFO */
+    uint_reg_t rfifo_we       : 1;
+    /* An entry of the write FIFO has been popped */
+    uint_reg_t wfifo_re       : 1;
+    /* Rshim read receive FIFO in protocol mode */
+    uint_reg_t rfifo_err      : 1;
+    /*
+     * An almost empty event is reached when data is to be read from the
+     * transmit FIFO, and the transmit FIFO has less than or equal to
+     * BUFFER_THRESHOLD.TFIFO_AEMPTY bytes.
+     */
+    uint_reg_t tfifo_aempty   : 1;
+    /* Reserved. */
+    uint_reg_t __reserved_1   : 52;
+#else   /* __BIG_ENDIAN__ */
+    uint_reg_t __reserved_1   : 52;
+    uint_reg_t tfifo_aempty   : 1;
+    uint_reg_t rfifo_err      : 1;
+    uint_reg_t wfifo_re       : 1;
+    uint_reg_t rfifo_we       : 1;
+    uint_reg_t tfifo_re       : 1;
+    uint_reg_t __reserved_0   : 1;
+    uint_reg_t rfifo_afull    : 1;
+    uint_reg_t rfifo_overflow : 1;
+    uint_reg_t parity_err     : 1;
+    uint_reg_t frame_err      : 1;
+    uint_reg_t wdat_err       : 1;
+    uint_reg_t rdat_err       : 1;
+#endif
+  };
+
+  uint_reg_t word;
+} UART_INTERRUPT_MASK_t;
+
+/*
+ * Interrupt vector, write-one-to-clear.
+ * Each bit in this register corresponds to a specific interrupt. Hardware
+ * sets the bit when the associated condition has occurred. Writing a 1
+ * clears the status bit.
+ */
+
+__extension__
+typedef union
+{
+  struct
+  {
+#ifndef __BIG_ENDIAN__
+    /* Read data FIFO read and no data available */
+    uint_reg_t rdat_err       : 1;
+    /* Write FIFO was written but it was full */
+    uint_reg_t wdat_err       : 1;
+    /* Stop bit not found when current data was received */
+    uint_reg_t frame_err      : 1;
+    /* Parity error was detected when current data was received */
+    uint_reg_t parity_err     : 1;
+    /* Data was received but the receive FIFO was full */
+    uint_reg_t rfifo_overflow : 1;
+    /*
+     * Data was received and the receive FIFO is now almost full (more than
+     * BUFFER_THRESHOLD.RFIFO_AFULL bytes in it)
+     */
+    uint_reg_t rfifo_afull    : 1;
+    /* Reserved. */
+    uint_reg_t __reserved_0   : 1;
+    /* An entry in the transmit FIFO was popped */
+    uint_reg_t tfifo_re       : 1;
+    /* An entry has been pushed into the receive FIFO */
+    uint_reg_t rfifo_we       : 1;
+    /* An entry of the write FIFO has been popped */
+    uint_reg_t wfifo_re       : 1;
+    /* Rshim read receive FIFO in protocol mode */
+    uint_reg_t rfifo_err      : 1;
+    /*
+     * Data was read from the transmit FIFO and now it is almost empty (less
+     * than or equal to BUFFER_THRESHOLD.TFIFO_AEMPTY bytes in it).
+     */
+    uint_reg_t tfifo_aempty   : 1;
+    /* Reserved. */
+    uint_reg_t __reserved_1   : 52;
+#else   /* __BIG_ENDIAN__ */
+    uint_reg_t __reserved_1   : 52;
+    uint_reg_t tfifo_aempty   : 1;
+    uint_reg_t rfifo_err      : 1;
+    uint_reg_t wfifo_re       : 1;
+    uint_reg_t rfifo_we       : 1;
+    uint_reg_t tfifo_re       : 1;
+    uint_reg_t __reserved_0   : 1;
+    uint_reg_t rfifo_afull    : 1;
+    uint_reg_t rfifo_overflow : 1;
+    uint_reg_t parity_err     : 1;
+    uint_reg_t frame_err      : 1;
+    uint_reg_t wdat_err       : 1;
+    uint_reg_t rdat_err       : 1;
+#endif
+  };
+
+  uint_reg_t word;
+} UART_INTERRUPT_STATUS_t;
+
+/* Type. */
+
+__extension__
+typedef union
+{
+  struct
+  {
+#ifndef __BIG_ENDIAN__
+    /* Number of stop bits, rx and tx */
+    uint_reg_t sbits        : 1;
+    /* Reserved. */
+    uint_reg_t __reserved_0 : 1;
+    /* Data word size, rx and tx */
+    uint_reg_t dbits        : 1;
+    /* Reserved. */
+    uint_reg_t __reserved_1 : 1;
+    /* Parity selection, rx and tx */
+    uint_reg_t ptype        : 3;
+    /* Reserved. */
+    uint_reg_t __reserved_2 : 57;
+#else   /* __BIG_ENDIAN__ */
+    uint_reg_t __reserved_2 : 57;
+    uint_reg_t ptype        : 3;
+    uint_reg_t __reserved_1 : 1;
+    uint_reg_t dbits        : 1;
+    uint_reg_t __reserved_0 : 1;
+    uint_reg_t sbits        : 1;
+#endif
+  };
+
+  uint_reg_t word;
+} UART_TYPE_t;
+#endif /* !defined(__ASSEMBLER__) */
+
+#endif /* !defined(__ARCH_UART_H__) */
diff --git a/arch/tile/include/arch/uart_def.h b/arch/tile/include/arch/uart_def.h
new file mode 100644
index 0000000..42bcaf5
--- /dev/null
+++ b/arch/tile/include/arch/uart_def.h
@@ -0,0 +1,120 @@
+/*
+ * Copyright 2013 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/* Machine-generated file; do not edit. */
+
+#ifndef __ARCH_UART_DEF_H__
+#define __ARCH_UART_DEF_H__
+#define UART_DIVISOR 0x0158
+#define UART_FIFO_COUNT 0x0110
+#define UART_FLAG 0x0108
+#define UART_INTERRUPT_MASK 0x0208
+#define UART_INTERRUPT_MASK__RDAT_ERR_SHIFT 0
+#define UART_INTERRUPT_MASK__RDAT_ERR_WIDTH 1
+#define UART_INTERRUPT_MASK__RDAT_ERR_RESET_VAL 1
+#define UART_INTERRUPT_MASK__RDAT_ERR_RMASK 0x1
+#define UART_INTERRUPT_MASK__RDAT_ERR_MASK  0x1
+#define UART_INTERRUPT_MASK__RDAT_ERR_FIELD 0,0
+#define UART_INTERRUPT_MASK__WDAT_ERR_SHIFT 1
+#define UART_INTERRUPT_MASK__WDAT_ERR_WIDTH 1
+#define UART_INTERRUPT_MASK__WDAT_ERR_RESET_VAL 1
+#define UART_INTERRUPT_MASK__WDAT_ERR_RMASK 0x1
+#define UART_INTERRUPT_MASK__WDAT_ERR_MASK  0x2
+#define UART_INTERRUPT_MASK__WDAT_ERR_FIELD 1,1
+#define UART_INTERRUPT_MASK__FRAME_ERR_SHIFT 2
+#define UART_INTERRUPT_MASK__FRAME_ERR_WIDTH 1
+#define UART_INTERRUPT_MASK__FRAME_ERR_RESET_VAL 1
+#define UART_INTERRUPT_MASK__FRAME_ERR_RMASK 0x1
+#define UART_INTERRUPT_MASK__FRAME_ERR_MASK  0x4
+#define UART_INTERRUPT_MASK__FRAME_ERR_FIELD 2,2
+#define UART_INTERRUPT_MASK__PARITY_ERR_SHIFT 3
+#define UART_INTERRUPT_MASK__PARITY_ERR_WIDTH 1
+#define UART_INTERRUPT_MASK__PARITY_ERR_RESET_VAL 1
+#define UART_INTERRUPT_MASK__PARITY_ERR_RMASK 0x1
+#define UART_INTERRUPT_MASK__PARITY_ERR_MASK  0x8
+#define UART_INTERRUPT_MASK__PARITY_ERR_FIELD 3,3
+#define UART_INTERRUPT_MASK__RFIFO_OVERFLOW_SHIFT 4
+#define UART_INTERRUPT_MASK__RFIFO_OVERFLOW_WIDTH 1
+#define UART_INTERRUPT_MASK__RFIFO_OVERFLOW_RESET_VAL 1
+#define UART_INTERRUPT_MASK__RFIFO_OVERFLOW_RMASK 0x1
+#define UART_INTERRUPT_MASK__RFIFO_OVERFLOW_MASK  0x10
+#define UART_INTERRUPT_MASK__RFIFO_OVERFLOW_FIELD 4,4
+#define UART_INTERRUPT_MASK__RFIFO_AFULL_SHIFT 5
+#define UART_INTERRUPT_MASK__RFIFO_AFULL_WIDTH 1
+#define UART_INTERRUPT_MASK__RFIFO_AFULL_RESET_VAL 1
+#define UART_INTERRUPT_MASK__RFIFO_AFULL_RMASK 0x1
+#define UART_INTERRUPT_MASK__RFIFO_AFULL_MASK  0x20
+#define UART_INTERRUPT_MASK__RFIFO_AFULL_FIELD 5,5
+#define UART_INTERRUPT_MASK__TFIFO_RE_SHIFT 7
+#define UART_INTERRUPT_MASK__TFIFO_RE_WIDTH 1
+#define UART_INTERRUPT_MASK__TFIFO_RE_RESET_VAL 1
+#define UART_INTERRUPT_MASK__TFIFO_RE_RMASK 0x1
+#define UART_INTERRUPT_MASK__TFIFO_RE_MASK  0x80
+#define UART_INTERRUPT_MASK__TFIFO_RE_FIELD 7,7
+#define UART_INTERRUPT_MASK__RFIFO_WE_SHIFT 8
+#define UART_INTERRUPT_MASK__RFIFO_WE_WIDTH 1
+#define UART_INTERRUPT_MASK__RFIFO_WE_RESET_VAL 1
+#define UART_INTERRUPT_MASK__RFIFO_WE_RMASK 0x1
+#define UART_INTERRUPT_MASK__RFIFO_WE_MASK  0x100
+#define UART_INTERRUPT_MASK__RFIFO_WE_FIELD 8,8
+#define UART_INTERRUPT_MASK__WFIFO_RE_SHIFT 9
+#define UART_INTERRUPT_MASK__WFIFO_RE_WIDTH 1
+#define UART_INTERRUPT_MASK__WFIFO_RE_RESET_VAL 1
+#define UART_INTERRUPT_MASK__WFIFO_RE_RMASK 0x1
+#define UART_INTERRUPT_MASK__WFIFO_RE_MASK  0x200
+#define UART_INTERRUPT_MASK__WFIFO_RE_FIELD 9,9
+#define UART_INTERRUPT_MASK__RFIFO_ERR_SHIFT 10
+#define UART_INTERRUPT_MASK__RFIFO_ERR_WIDTH 1
+#define UART_INTERRUPT_MASK__RFIFO_ERR_RESET_VAL 1
+#define UART_INTERRUPT_MASK__RFIFO_ERR_RMASK 0x1
+#define UART_INTERRUPT_MASK__RFIFO_ERR_MASK  0x400
+#define UART_INTERRUPT_MASK__RFIFO_ERR_FIELD 10,10
+#define UART_INTERRUPT_MASK__TFIFO_AEMPTY_SHIFT 11
+#define UART_INTERRUPT_MASK__TFIFO_AEMPTY_WIDTH 1
+#define UART_INTERRUPT_MASK__TFIFO_AEMPTY_RESET_VAL 1
+#define UART_INTERRUPT_MASK__TFIFO_AEMPTY_RMASK 0x1
+#define UART_INTERRUPT_MASK__TFIFO_AEMPTY_MASK  0x800
+#define UART_INTERRUPT_MASK__TFIFO_AEMPTY_FIELD 11,11
+#define UART_INTERRUPT_STATUS 0x0200
+#define UART_RECEIVE_DATA 0x0148
+#define UART_TRANSMIT_DATA 0x0140
+#define UART_TYPE 0x0160
+#define UART_TYPE__SBITS_SHIFT 0
+#define UART_TYPE__SBITS_WIDTH 1
+#define UART_TYPE__SBITS_RESET_VAL 1
+#define UART_TYPE__SBITS_RMASK 0x1
+#define UART_TYPE__SBITS_MASK  0x1
+#define UART_TYPE__SBITS_FIELD 0,0
+#define UART_TYPE__SBITS_VAL_ONE_SBITS 0x0
+#define UART_TYPE__SBITS_VAL_TWO_SBITS 0x1
+#define UART_TYPE__DBITS_SHIFT 2
+#define UART_TYPE__DBITS_WIDTH 1
+#define UART_TYPE__DBITS_RESET_VAL 0
+#define UART_TYPE__DBITS_RMASK 0x1
+#define UART_TYPE__DBITS_MASK  0x4
+#define UART_TYPE__DBITS_FIELD 2,2
+#define UART_TYPE__DBITS_VAL_EIGHT_DBITS 0x0
+#define UART_TYPE__DBITS_VAL_SEVEN_DBITS 0x1
+#define UART_TYPE__PTYPE_SHIFT 4
+#define UART_TYPE__PTYPE_WIDTH 3
+#define UART_TYPE__PTYPE_RESET_VAL 3
+#define UART_TYPE__PTYPE_RMASK 0x7
+#define UART_TYPE__PTYPE_MASK  0x70
+#define UART_TYPE__PTYPE_FIELD 4,6
+#define UART_TYPE__PTYPE_VAL_NONE 0x0
+#define UART_TYPE__PTYPE_VAL_MARK 0x1
+#define UART_TYPE__PTYPE_VAL_SPACE 0x2
+#define UART_TYPE__PTYPE_VAL_EVEN 0x3
+#define UART_TYPE__PTYPE_VAL_ODD 0x4
+#endif /* !defined(__ARCH_UART_DEF_H__) */
diff --git a/arch/tile/include/asm/Kbuild b/arch/tile/include/asm/Kbuild
index b17b9b8..664d6ad 100644
--- a/arch/tile/include/asm/Kbuild
+++ b/arch/tile/include/asm/Kbuild
@@ -11,12 +11,13 @@ generic-y += errno.h
 generic-y += exec.h
 generic-y += fb.h
 generic-y += fcntl.h
+generic-y += hw_irq.h
 generic-y += ioctl.h
 generic-y += ioctls.h
 generic-y += ipcbuf.h
 generic-y += irq_regs.h
-generic-y += kdebug.h
 generic-y += local.h
+generic-y += local64.h
 generic-y += msgbuf.h
 generic-y += mutex.h
 generic-y += param.h
diff --git a/arch/tile/include/asm/atomic.h b/arch/tile/include/asm/atomic.h
index e71387a..7097984 100644
--- a/arch/tile/include/asm/atomic.h
+++ b/arch/tile/include/asm/atomic.h
@@ -114,6 +114,32 @@ static inline int atomic_read(const atomic_t *v)
 #define atomic_inc_and_test(v)		(atomic_inc_return(v) == 0)
 
 /**
+ * atomic_xchg - atomically exchange contents of memory with a new value
+ * @v: pointer of type atomic_t
+ * @i: integer value to store in memory
+ *
+ * Atomically sets @v to @i and returns old @v
+ */
+static inline int atomic_xchg(atomic_t *v, int n)
+{
+	return xchg(&v->counter, n);
+}
+
+/**
+ * atomic_cmpxchg - atomically exchange contents of memory if it matches
+ * @v: pointer of type atomic_t
+ * @o: old value that memory should have
+ * @n: new value to write to memory if it matches
+ *
+ * Atomically checks if @v holds @o and replaces it with @n if so.
+ * Returns the old value at @v.
+ */
+static inline int atomic_cmpxchg(atomic_t *v, int o, int n)
+{
+	return cmpxchg(&v->counter, o, n);
+}
+
+/**
  * atomic_add_negative - add and test if negative
  * @v: pointer of type atomic_t
  * @i: integer value to add
@@ -133,6 +159,33 @@ static inline int atomic_read(const atomic_t *v)
 
 #ifndef __ASSEMBLY__
 
+/**
+ * atomic64_xchg - atomically exchange contents of memory with a new value
+ * @v: pointer of type atomic64_t
+ * @i: integer value to store in memory
+ *
+ * Atomically sets @v to @i and returns old @v
+ */
+static inline long long atomic64_xchg(atomic64_t *v, long long n)
+{
+	return xchg64(&v->counter, n);
+}
+
+/**
+ * atomic64_cmpxchg - atomically exchange contents of memory if it matches
+ * @v: pointer of type atomic64_t
+ * @o: old value that memory should have
+ * @n: new value to write to memory if it matches
+ *
+ * Atomically checks if @v holds @o and replaces it with @n if so.
+ * Returns the old value at @v.
+ */
+static inline long long atomic64_cmpxchg(atomic64_t *v, long long o,
+					long long n)
+{
+	return cmpxchg64(&v->counter, o, n);
+}
+
 static inline long long atomic64_dec_if_positive(atomic64_t *v)
 {
 	long long c, old, dec;
diff --git a/arch/tile/include/asm/atomic_32.h b/arch/tile/include/asm/atomic_32.h
index e7fb5cf..1ad4a1f 100644
--- a/arch/tile/include/asm/atomic_32.h
+++ b/arch/tile/include/asm/atomic_32.h
@@ -22,40 +22,6 @@
 
 #ifndef __ASSEMBLY__
 
-/* Tile-specific routines to support <linux/atomic.h>. */
-int _atomic_xchg(atomic_t *v, int n);
-int _atomic_xchg_add(atomic_t *v, int i);
-int _atomic_xchg_add_unless(atomic_t *v, int a, int u);
-int _atomic_cmpxchg(atomic_t *v, int o, int n);
-
-/**
- * atomic_xchg - atomically exchange contents of memory with a new value
- * @v: pointer of type atomic_t
- * @i: integer value to store in memory
- *
- * Atomically sets @v to @i and returns old @v
- */
-static inline int atomic_xchg(atomic_t *v, int n)
-{
-	smp_mb();  /* barrier for proper semantics */
-	return _atomic_xchg(v, n);
-}
-
-/**
- * atomic_cmpxchg - atomically exchange contents of memory if it matches
- * @v: pointer of type atomic_t
- * @o: old value that memory should have
- * @n: new value to write to memory if it matches
- *
- * Atomically checks if @v holds @o and replaces it with @n if so.
- * Returns the old value at @v.
- */
-static inline int atomic_cmpxchg(atomic_t *v, int o, int n)
-{
-	smp_mb();  /* barrier for proper semantics */
-	return _atomic_cmpxchg(v, o, n);
-}
-
 /**
  * atomic_add - add integer to atomic variable
  * @i: integer value to add
@@ -65,7 +31,7 @@ static inline int atomic_cmpxchg(atomic_t *v, int o, int n)
  */
 static inline void atomic_add(int i, atomic_t *v)
 {
-	_atomic_xchg_add(v, i);
+	_atomic_xchg_add(&v->counter, i);
 }
 
 /**
@@ -78,7 +44,7 @@ static inline void atomic_add(int i, atomic_t *v)
 static inline int atomic_add_return(int i, atomic_t *v)
 {
 	smp_mb();  /* barrier for proper semantics */
-	return _atomic_xchg_add(v, i) + i;
+	return _atomic_xchg_add(&v->counter, i) + i;
 }
 
 /**
@@ -93,7 +59,7 @@ static inline int atomic_add_return(int i, atomic_t *v)
 static inline int __atomic_add_unless(atomic_t *v, int a, int u)
 {
 	smp_mb();  /* barrier for proper semantics */
-	return _atomic_xchg_add_unless(v, a, u);
+	return _atomic_xchg_add_unless(&v->counter, a, u);
 }
 
 /**
@@ -108,64 +74,31 @@ static inline int __atomic_add_unless(atomic_t *v, int a, int u)
  */
 static inline void atomic_set(atomic_t *v, int n)
 {
-	_atomic_xchg(v, n);
+	_atomic_xchg(&v->counter, n);
 }
 
 /* A 64bit atomic type */
 
 typedef struct {
-	u64 __aligned(8) counter;
+	long long counter;
 } atomic64_t;
 
 #define ATOMIC64_INIT(val) { (val) }
 
-u64 _atomic64_xchg(atomic64_t *v, u64 n);
-u64 _atomic64_xchg_add(atomic64_t *v, u64 i);
-u64 _atomic64_xchg_add_unless(atomic64_t *v, u64 a, u64 u);
-u64 _atomic64_cmpxchg(atomic64_t *v, u64 o, u64 n);
-
 /**
  * atomic64_read - read atomic variable
  * @v: pointer of type atomic64_t
  *
  * Atomically reads the value of @v.
  */
-static inline u64 atomic64_read(const atomic64_t *v)
+static inline long long atomic64_read(const atomic64_t *v)
 {
 	/*
 	 * Requires an atomic op to read both 32-bit parts consistently.
 	 * Casting away const is safe since the atomic support routines
 	 * do not write to memory if the value has not been modified.
 	 */
-	return _atomic64_xchg_add((atomic64_t *)v, 0);
-}
-
-/**
- * atomic64_xchg - atomically exchange contents of memory with a new value
- * @v: pointer of type atomic64_t
- * @i: integer value to store in memory
- *
- * Atomically sets @v to @i and returns old @v
- */
-static inline u64 atomic64_xchg(atomic64_t *v, u64 n)
-{
-	smp_mb();  /* barrier for proper semantics */
-	return _atomic64_xchg(v, n);
-}
-
-/**
- * atomic64_cmpxchg - atomically exchange contents of memory if it matches
- * @v: pointer of type atomic64_t
- * @o: old value that memory should have
- * @n: new value to write to memory if it matches
- *
- * Atomically checks if @v holds @o and replaces it with @n if so.
- * Returns the old value at @v.
- */
-static inline u64 atomic64_cmpxchg(atomic64_t *v, u64 o, u64 n)
-{
-	smp_mb();  /* barrier for proper semantics */
-	return _atomic64_cmpxchg(v, o, n);
+	return _atomic64_xchg_add((long long *)&v->counter, 0);
 }
 
 /**
@@ -175,9 +108,9 @@ static inline u64 atomic64_cmpxchg(atomic64_t *v, u64 o, u64 n)
  *
  * Atomically adds @i to @v.
  */
-static inline void atomic64_add(u64 i, atomic64_t *v)
+static inline void atomic64_add(long long i, atomic64_t *v)
 {
-	_atomic64_xchg_add(v, i);
+	_atomic64_xchg_add(&v->counter, i);
 }
 
 /**
@@ -187,10 +120,10 @@ static inline void atomic64_add(u64 i, atomic64_t *v)
  *
  * Atomically adds @i to @v and returns @i + @v
  */
-static inline u64 atomic64_add_return(u64 i, atomic64_t *v)
+static inline long long atomic64_add_return(long long i, atomic64_t *v)
 {
 	smp_mb();  /* barrier for proper semantics */
-	return _atomic64_xchg_add(v, i) + i;
+	return _atomic64_xchg_add(&v->counter, i) + i;
 }
 
 /**
@@ -202,10 +135,11 @@ static inline u64 atomic64_add_return(u64 i, atomic64_t *v)
  * Atomically adds @a to @v, so long as @v was not already @u.
  * Returns non-zero if @v was not @u, and zero otherwise.
  */
-static inline u64 atomic64_add_unless(atomic64_t *v, u64 a, u64 u)
+static inline long long atomic64_add_unless(atomic64_t *v, long long a,
+					long long u)
 {
 	smp_mb();  /* barrier for proper semantics */
-	return _atomic64_xchg_add_unless(v, a, u) != u;
+	return _atomic64_xchg_add_unless(&v->counter, a, u) != u;
 }
 
 /**
@@ -218,9 +152,9 @@ static inline u64 atomic64_add_unless(atomic64_t *v, u64 a, u64 u)
  * atomic64_set() can't be just a raw store, since it would be lost if it
  * fell between the load and store of one of the other atomic ops.
  */
-static inline void atomic64_set(atomic64_t *v, u64 n)
+static inline void atomic64_set(atomic64_t *v, long long n)
 {
-	_atomic64_xchg(v, n);
+	_atomic64_xchg(&v->counter, n);
 }
 
 #define atomic64_add_negative(a, v)	(atomic64_add_return((a), (v)) < 0)
@@ -252,21 +186,6 @@ static inline void atomic64_set(atomic64_t *v, u64 n)
  * Internal definitions only beyond this point.
  */
 
-#define ATOMIC_LOCKS_FOUND_VIA_TABLE() \
-  (!CHIP_HAS_CBOX_HOME_MAP() && defined(CONFIG_SMP))
-
-#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
-
-/* Number of entries in atomic_lock_ptr[]. */
-#define ATOMIC_HASH_L1_SHIFT 6
-#define ATOMIC_HASH_L1_SIZE (1 << ATOMIC_HASH_L1_SHIFT)
-
-/* Number of locks in each struct pointed to by atomic_lock_ptr[]. */
-#define ATOMIC_HASH_L2_SHIFT (CHIP_L2_LOG_LINE_SIZE() - 2)
-#define ATOMIC_HASH_L2_SIZE (1 << ATOMIC_HASH_L2_SHIFT)
-
-#else /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
-
 /*
  * Number of atomic locks in atomic_locks[]. Must be a power of two.
  * There is no reason for more than PAGE_SIZE / 8 entries, since that
@@ -281,8 +200,6 @@ static inline void atomic64_set(atomic64_t *v, u64 n)
 extern int atomic_locks[];
 #endif
 
-#endif /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
-
 /*
  * All the code that may fault while holding an atomic lock must
  * place the pointer to the lock in ATOMIC_LOCK_REG so the fault code
@@ -320,11 +237,13 @@ extern struct __get_user __atomic_xchg_add_unless(volatile int *p,
 extern struct __get_user __atomic_or(volatile int *p, int *lock, int n);
 extern struct __get_user __atomic_andn(volatile int *p, int *lock, int n);
 extern struct __get_user __atomic_xor(volatile int *p, int *lock, int n);
-extern u64 __atomic64_cmpxchg(volatile u64 *p, int *lock, u64 o, u64 n);
-extern u64 __atomic64_xchg(volatile u64 *p, int *lock, u64 n);
-extern u64 __atomic64_xchg_add(volatile u64 *p, int *lock, u64 n);
-extern u64 __atomic64_xchg_add_unless(volatile u64 *p,
-				      int *lock, u64 o, u64 n);
+extern long long __atomic64_cmpxchg(volatile long long *p, int *lock,
+					long long o, long long n);
+extern long long __atomic64_xchg(volatile long long *p, int *lock, long long n);
+extern long long __atomic64_xchg_add(volatile long long *p, int *lock,
+					long long n);
+extern long long __atomic64_xchg_add_unless(volatile long long *p,
+					int *lock, long long o, long long n);
 
 /* Return failure from the atomic wrappers. */
 struct __get_user __atomic_bad_address(int __user *addr);
diff --git a/arch/tile/include/asm/atomic_64.h b/arch/tile/include/asm/atomic_64.h
index f4500c6..ad220ee 100644
--- a/arch/tile/include/asm/atomic_64.h
+++ b/arch/tile/include/asm/atomic_64.h
@@ -32,25 +32,6 @@
  * on any routine which updates memory and returns a value.
  */
 
-static inline int atomic_cmpxchg(atomic_t *v, int o, int n)
-{
-	int val;
-	__insn_mtspr(SPR_CMPEXCH_VALUE, o);
-	smp_mb();  /* barrier for proper semantics */
-	val = __insn_cmpexch4((void *)&v->counter, n);
-	smp_mb();  /* barrier for proper semantics */
-	return val;
-}
-
-static inline int atomic_xchg(atomic_t *v, int n)
-{
-	int val;
-	smp_mb();  /* barrier for proper semantics */
-	val = __insn_exch4((void *)&v->counter, n);
-	smp_mb();  /* barrier for proper semantics */
-	return val;
-}
-
 static inline void atomic_add(int i, atomic_t *v)
 {
 	__insn_fetchadd4((void *)&v->counter, i);
@@ -72,7 +53,7 @@ static inline int __atomic_add_unless(atomic_t *v, int a, int u)
 		if (oldval == u)
 			break;
 		guess = oldval;
-		oldval = atomic_cmpxchg(v, guess, guess + a);
+		oldval = cmpxchg(&v->counter, guess, guess + a);
 	} while (guess != oldval);
 	return oldval;
 }
@@ -84,25 +65,6 @@ static inline int __atomic_add_unless(atomic_t *v, int a, int u)
 #define atomic64_read(v)		((v)->counter)
 #define atomic64_set(v, i) ((v)->counter = (i))
 
-static inline long atomic64_cmpxchg(atomic64_t *v, long o, long n)
-{
-	long val;
-	smp_mb();  /* barrier for proper semantics */
-	__insn_mtspr(SPR_CMPEXCH_VALUE, o);
-	val = __insn_cmpexch((void *)&v->counter, n);
-	smp_mb();  /* barrier for proper semantics */
-	return val;
-}
-
-static inline long atomic64_xchg(atomic64_t *v, long n)
-{
-	long val;
-	smp_mb();  /* barrier for proper semantics */
-	val = __insn_exch((void *)&v->counter, n);
-	smp_mb();  /* barrier for proper semantics */
-	return val;
-}
-
 static inline void atomic64_add(long i, atomic64_t *v)
 {
 	__insn_fetchadd((void *)&v->counter, i);
@@ -124,7 +86,7 @@ static inline long atomic64_add_unless(atomic64_t *v, long a, long u)
 		if (oldval == u)
 			break;
 		guess = oldval;
-		oldval = atomic64_cmpxchg(v, guess, guess + a);
+		oldval = cmpxchg(&v->counter, guess, guess + a);
 	} while (guess != oldval);
 	return oldval != u;
 }
diff --git a/arch/tile/include/asm/barrier.h b/arch/tile/include/asm/barrier.h
index 990a217..a9a73da 100644
--- a/arch/tile/include/asm/barrier.h
+++ b/arch/tile/include/asm/barrier.h
@@ -77,7 +77,6 @@
 
 #define __sync()	__insn_mf()
 
-#if !CHIP_HAS_MF_WAITS_FOR_VICTIMS()
 #include <hv/syscall_public.h>
 /*
  * Issue an uncacheable load to each memory controller, then
@@ -96,7 +95,6 @@ static inline void __mb_incoherent(void)
 		       "r20", "r21", "r22", "r23", "r24",
 		       "r25", "r26", "r27", "r28", "r29");
 }
-#endif
 
 /* Fence to guarantee visibility of stores to incoherent memory. */
 static inline void
@@ -104,7 +102,6 @@ mb_incoherent(void)
 {
 	__insn_mf();
 
-#if !CHIP_HAS_MF_WAITS_FOR_VICTIMS()
 	{
 #if CHIP_HAS_TILE_WRITE_PENDING()
 		const unsigned long WRITE_TIMEOUT_CYCLES = 400;
@@ -116,7 +113,6 @@ mb_incoherent(void)
 #endif /* CHIP_HAS_TILE_WRITE_PENDING() */
 		(void) __mb_incoherent();
 	}
-#endif /* CHIP_HAS_MF_WAITS_FOR_VICTIMS() */
 }
 
 #define fast_wmb()	__sync()
diff --git a/arch/tile/include/asm/bitops.h b/arch/tile/include/asm/bitops.h
index bd186c4..d5a2068 100644
--- a/arch/tile/include/asm/bitops.h
+++ b/arch/tile/include/asm/bitops.h
@@ -29,17 +29,6 @@
 #endif
 
 /**
- * __ffs - find first set bit in word
- * @word: The word to search
- *
- * Undefined if no set bit exists, so code should check against 0 first.
- */
-static inline unsigned long __ffs(unsigned long word)
-{
-	return __builtin_ctzl(word);
-}
-
-/**
  * ffz - find first zero bit in word
  * @word: The word to search
  *
@@ -50,33 +39,6 @@ static inline unsigned long ffz(unsigned long word)
 	return __builtin_ctzl(~word);
 }
 
-/**
- * __fls - find last set bit in word
- * @word: The word to search
- *
- * Undefined if no set bit exists, so code should check against 0 first.
- */
-static inline unsigned long __fls(unsigned long word)
-{
-	return (sizeof(word) * 8) - 1 - __builtin_clzl(word);
-}
-
-/**
- * ffs - find first set bit in word
- * @x: the word to search
- *
- * This is defined the same way as the libc and compiler builtin ffs
- * routines, therefore differs in spirit from the other bitops.
- *
- * ffs(value) returns 0 if value is 0 or the position of the first
- * set bit if value is nonzero. The first (least significant) bit
- * is at position 1.
- */
-static inline int ffs(int x)
-{
-	return __builtin_ffs(x);
-}
-
 static inline int fls64(__u64 w)
 {
 	return (sizeof(__u64) * 8) - __builtin_clzll(w);
@@ -118,6 +80,9 @@ static inline unsigned long __arch_hweight64(__u64 w)
 	return __builtin_popcountll(w);
 }
 
+#include <asm-generic/bitops/builtin-__ffs.h>
+#include <asm-generic/bitops/builtin-__fls.h>
+#include <asm-generic/bitops/builtin-ffs.h>
 #include <asm-generic/bitops/const_hweight.h>
 #include <asm-generic/bitops/lock.h>
 #include <asm-generic/bitops/find.h>
diff --git a/arch/tile/include/asm/bitops_32.h b/arch/tile/include/asm/bitops_32.h
index ddc4c1e..386865ad 100644
--- a/arch/tile/include/asm/bitops_32.h
+++ b/arch/tile/include/asm/bitops_32.h
@@ -16,7 +16,7 @@
 #define _ASM_TILE_BITOPS_32_H
 
 #include <linux/compiler.h>
-#include <linux/atomic.h>
+#include <asm/barrier.h>
 
 /* Tile-specific routines to support <asm/bitops.h>. */
 unsigned long _atomic_or(volatile unsigned long *p, unsigned long mask);
diff --git a/arch/tile/include/asm/bitops_64.h b/arch/tile/include/asm/bitops_64.h
index 60b87ee..ad34cd0 100644
--- a/arch/tile/include/asm/bitops_64.h
+++ b/arch/tile/include/asm/bitops_64.h
@@ -16,7 +16,7 @@
 #define _ASM_TILE_BITOPS_64_H
 
 #include <linux/compiler.h>
-#include <linux/atomic.h>
+#include <asm/cmpxchg.h>
 
 /* See <asm/bitops.h> for API comments. */
 
@@ -44,8 +44,7 @@ static inline void change_bit(unsigned nr, volatile unsigned long *addr)
 	oldval = *addr;
 	do {
 		guess = oldval;
-		oldval = atomic64_cmpxchg((atomic64_t *)addr,
-					  guess, guess ^ mask);
+		oldval = cmpxchg(addr, guess, guess ^ mask);
 	} while (guess != oldval);
 }
 
@@ -90,8 +89,7 @@ static inline int test_and_change_bit(unsigned nr,
 	oldval = *addr;
 	do {
 		guess = oldval;
-		oldval = atomic64_cmpxchg((atomic64_t *)addr,
-					  guess, guess ^ mask);
+		oldval = cmpxchg(addr, guess, guess ^ mask);
 	} while (guess != oldval);
 	return (oldval & mask) != 0;
 }
diff --git a/arch/tile/include/asm/cache.h b/arch/tile/include/asm/cache.h
index a9a5299..6160761 100644
--- a/arch/tile/include/asm/cache.h
+++ b/arch/tile/include/asm/cache.h
@@ -49,9 +49,16 @@
 #define __read_mostly __attribute__((__section__(".data..read_mostly")))
 
 /*
- * Attribute for data that is kept read/write coherent until the end of
- * initialization, then bumped to read/only incoherent for performance.
+ * Originally we used small TLB pages for kernel data and grouped some
+ * things together as "write once", enforcing the property at the end
+ * of initialization by making those pages read-only and non-coherent.
+ * This allowed better cache utilization since cache inclusion did not
+ * need to be maintained.  However, to do this requires an extra TLB
+ * entry, which on balance is more of a performance hit than the
+ * non-coherence is a performance gain, so we now just make "read
+ * mostly" and "write once" be synonyms.  We keep the attribute
+ * separate in case we change our minds at a future date.
  */
-#define __write_once __attribute__((__section__(".w1data")))
+#define __write_once __read_mostly
 
 #endif /* _ASM_TILE_CACHE_H */
diff --git a/arch/tile/include/asm/cacheflush.h b/arch/tile/include/asm/cacheflush.h
index 0fc63c4..92ee4c8 100644
--- a/arch/tile/include/asm/cacheflush.h
+++ b/arch/tile/include/asm/cacheflush.h
@@ -75,23 +75,6 @@ static inline void copy_to_user_page(struct vm_area_struct *vma,
 #define copy_from_user_page(vma, page, vaddr, dst, src, len) \
 	memcpy((dst), (src), (len))
 
-/*
- * Invalidate a VA range; pads to L2 cacheline boundaries.
- *
- * Note that on TILE64, __inv_buffer() actually flushes modified
- * cache lines in addition to invalidating them, i.e., it's the
- * same as __finv_buffer().
- */
-static inline void __inv_buffer(void *buffer, size_t size)
-{
-	char *next = (char *)((long)buffer & -L2_CACHE_BYTES);
-	char *finish = (char *)L2_CACHE_ALIGN((long)buffer + size);
-	while (next < finish) {
-		__insn_inv(next);
-		next += CHIP_INV_STRIDE();
-	}
-}
-
 /* Flush a VA range; pads to L2 cacheline boundaries. */
 static inline void __flush_buffer(void *buffer, size_t size)
 {
@@ -115,13 +98,6 @@ static inline void __finv_buffer(void *buffer, size_t size)
 }
 
 
-/* Invalidate a VA range and wait for it to be complete. */
-static inline void inv_buffer(void *buffer, size_t size)
-{
-	__inv_buffer(buffer, size);
-	mb();
-}
-
 /*
  * Flush a locally-homecached VA range and wait for the evicted
  * cachelines to hit memory.
@@ -142,6 +118,26 @@ static inline void finv_buffer_local(void *buffer, size_t size)
 	mb_incoherent();
 }
 
+#ifdef __tilepro__
+/* Invalidate a VA range; pads to L2 cacheline boundaries. */
+static inline void __inv_buffer(void *buffer, size_t size)
+{
+	char *next = (char *)((long)buffer & -L2_CACHE_BYTES);
+	char *finish = (char *)L2_CACHE_ALIGN((long)buffer + size);
+	while (next < finish) {
+		__insn_inv(next);
+		next += CHIP_INV_STRIDE();
+	}
+}
+
+/* Invalidate a VA range and wait for it to be complete. */
+static inline void inv_buffer(void *buffer, size_t size)
+{
+	__inv_buffer(buffer, size);
+	mb();
+}
+#endif
+
 /*
  * Flush and invalidate a VA range that is homed remotely, waiting
  * until the memory controller holds the flushed values.  If "hfh" is
diff --git a/arch/tile/include/asm/cmpxchg.h b/arch/tile/include/asm/cmpxchg.h
index 276f067..0ccda3c 100644
--- a/arch/tile/include/asm/cmpxchg.h
+++ b/arch/tile/include/asm/cmpxchg.h
@@ -20,53 +20,114 @@
 
 #ifndef __ASSEMBLY__
 
-/* Nonexistent functions intended to cause link errors. */
-extern unsigned long __xchg_called_with_bad_pointer(void);
-extern unsigned long __cmpxchg_called_with_bad_pointer(void);
+#include <asm/barrier.h>
 
-#define xchg(ptr, x)							\
+/* Nonexistent functions intended to cause compile errors. */
+extern void __xchg_called_with_bad_pointer(void)
+	__compiletime_error("Bad argument size for xchg");
+extern void __cmpxchg_called_with_bad_pointer(void)
+	__compiletime_error("Bad argument size for cmpxchg");
+
+#ifndef __tilegx__
+
+/* Note the _atomic_xxx() routines include a final mb(). */
+int _atomic_xchg(int *ptr, int n);
+int _atomic_xchg_add(int *v, int i);
+int _atomic_xchg_add_unless(int *v, int a, int u);
+int _atomic_cmpxchg(int *ptr, int o, int n);
+long long _atomic64_xchg(long long *v, long long n);
+long long _atomic64_xchg_add(long long *v, long long i);
+long long _atomic64_xchg_add_unless(long long *v, long long a, long long u);
+long long _atomic64_cmpxchg(long long *v, long long o, long long n);
+
+#define xchg(ptr, n)							\
+	({								\
+		if (sizeof(*(ptr)) != 4)				\
+			__xchg_called_with_bad_pointer();		\
+		smp_mb();						\
+		(typeof(*(ptr)))_atomic_xchg((int *)(ptr), (int)(n));	\
+	})
+
+#define cmpxchg(ptr, o, n)						\
+	({								\
+		if (sizeof(*(ptr)) != 4)				\
+			__cmpxchg_called_with_bad_pointer();		\
+		smp_mb();						\
+		(typeof(*(ptr)))_atomic_cmpxchg((int *)ptr, (int)o,	\
+						(int)n);		\
+	})
+
+#define xchg64(ptr, n)							\
+	({								\
+		if (sizeof(*(ptr)) != 8)				\
+			__xchg_called_with_bad_pointer();		\
+		smp_mb();						\
+		(typeof(*(ptr)))_atomic64_xchg((long long *)(ptr),	\
+						(long long)(n));	\
+	})
+
+#define cmpxchg64(ptr, o, n)						\
+	({								\
+		if (sizeof(*(ptr)) != 8)				\
+			__cmpxchg_called_with_bad_pointer();		\
+		smp_mb();						\
+		(typeof(*(ptr)))_atomic64_cmpxchg((long long *)ptr,	\
+					(long long)o, (long long)n);	\
+	})
+
+#else
+
+#define xchg(ptr, n)							\
 	({								\
 		typeof(*(ptr)) __x;					\
+		smp_mb();						\
 		switch (sizeof(*(ptr))) {				\
 		case 4:							\
-			__x = (typeof(__x))(typeof(__x-__x))atomic_xchg( \
-				(atomic_t *)(ptr),			\
-				(u32)(typeof((x)-(x)))(x));		\
+			__x = (typeof(__x))(unsigned long)		\
+				__insn_exch4((ptr),			\
+					(u32)(unsigned long)(n));	\
 			break;						\
 		case 8:							\
-			__x = (typeof(__x))(typeof(__x-__x))atomic64_xchg( \
-				(atomic64_t *)(ptr),			\
-				(u64)(typeof((x)-(x)))(x));		\
+			__x = (typeof(__x))				\
+				__insn_exch((ptr), (unsigned long)(n));	\
 			break;						\
 		default:						\
 			__xchg_called_with_bad_pointer();		\
+			break;						\
 		}							\
+		smp_mb();						\
 		__x;							\
 	})
 
 #define cmpxchg(ptr, o, n)						\
 	({								\
 		typeof(*(ptr)) __x;					\
+		__insn_mtspr(SPR_CMPEXCH_VALUE, (unsigned long)(o));	\
+		smp_mb();						\
 		switch (sizeof(*(ptr))) {				\
 		case 4:							\
-			__x = (typeof(__x))(typeof(__x-__x))atomic_cmpxchg( \
-				(atomic_t *)(ptr),			\
-				(u32)(typeof((o)-(o)))(o),		\
-				(u32)(typeof((n)-(n)))(n));		\
+			__x = (typeof(__x))(unsigned long)		\
+				__insn_cmpexch4((ptr),			\
+					(u32)(unsigned long)(n));	\
 			break;						\
 		case 8:							\
-			__x = (typeof(__x))(typeof(__x-__x))atomic64_cmpxchg( \
-				(atomic64_t *)(ptr),			\
-				(u64)(typeof((o)-(o)))(o),		\
-				(u64)(typeof((n)-(n)))(n));		\
+			__x = (typeof(__x))__insn_cmpexch((ptr),	\
+						(long long)(n));	\
 			break;						\
 		default:						\
 			__cmpxchg_called_with_bad_pointer();		\
+			break;						\
 		}							\
+		smp_mb();						\
 		__x;							\
 	})
 
-#define tas(ptr) (xchg((ptr), 1))
+#define xchg64 xchg
+#define cmpxchg64 cmpxchg
+
+#endif
+
+#define tas(ptr) xchg((ptr), 1)
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/tile/include/asm/device.h b/arch/tile/include/asm/device.h
index 5182705..6ab8bf1 100644
--- a/arch/tile/include/asm/device.h
+++ b/arch/tile/include/asm/device.h
@@ -23,7 +23,10 @@ struct dev_archdata {
 	/* Offset of the DMA address from the PA. */
 	dma_addr_t		dma_offset;
 
-	/* Highest DMA address that can be generated by this device. */
+	/*
+	 * Highest DMA address that can be generated by devices that
+	 * have limited DMA capability, i.e. non 64-bit capable.
+	 */
 	dma_addr_t		max_direct_dma_addr;
 };
 
diff --git a/arch/tile/include/asm/dma-mapping.h b/arch/tile/include/asm/dma-mapping.h
index f2ff191..1eae359 100644
--- a/arch/tile/include/asm/dma-mapping.h
+++ b/arch/tile/include/asm/dma-mapping.h
@@ -20,9 +20,14 @@
 #include <linux/cache.h>
 #include <linux/io.h>
 
+#ifdef __tilegx__
+#define ARCH_HAS_DMA_GET_REQUIRED_MASK
+#endif
+
 extern struct dma_map_ops *tile_dma_map_ops;
 extern struct dma_map_ops *gx_pci_dma_map_ops;
 extern struct dma_map_ops *gx_legacy_pci_dma_map_ops;
+extern struct dma_map_ops *gx_hybrid_pci_dma_map_ops;
 
 static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 {
@@ -44,12 +49,12 @@ static inline void set_dma_offset(struct device *dev, dma_addr_t off)
 
 static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
-	return paddr + get_dma_offset(dev);
+	return paddr;
 }
 
 static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
 {
-	return daddr - get_dma_offset(dev);
+	return daddr;
 }
 
 static inline void dma_mark_clean(void *addr, size_t size) {}
@@ -87,11 +92,19 @@ dma_set_mask(struct device *dev, u64 mask)
 {
 	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
-	/* Handle legacy PCI devices with limited memory addressability. */
-	if ((dma_ops == gx_pci_dma_map_ops) && (mask <= DMA_BIT_MASK(32))) {
-		set_dma_ops(dev, gx_legacy_pci_dma_map_ops);
-		set_dma_offset(dev, 0);
-		if (mask > dev->archdata.max_direct_dma_addr)
+	/*
+	 * For PCI devices with 64-bit DMA addressing capability, promote
+	 * the dma_ops to hybrid, with the consistent memory DMA space limited
+	 * to 32-bit. For 32-bit capable devices, limit the streaming DMA
+	 * address range to max_direct_dma_addr.
+	 */
+	if (dma_ops == gx_pci_dma_map_ops ||
+	    dma_ops == gx_hybrid_pci_dma_map_ops ||
+	    dma_ops == gx_legacy_pci_dma_map_ops) {
+		if (mask == DMA_BIT_MASK(64) &&
+		    dma_ops == gx_legacy_pci_dma_map_ops)
+			set_dma_ops(dev, gx_hybrid_pci_dma_map_ops);
+		else if (mask > dev->archdata.max_direct_dma_addr)
 			mask = dev->archdata.max_direct_dma_addr;
 	}
 
diff --git a/arch/tile/include/asm/elf.h b/arch/tile/include/asm/elf.h
index ff8a934..41d9878 100644
--- a/arch/tile/include/asm/elf.h
+++ b/arch/tile/include/asm/elf.h
@@ -30,7 +30,6 @@ typedef unsigned long elf_greg_t;
 #define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
 typedef elf_greg_t elf_gregset_t[ELF_NGREG];
 
-#define EM_TILE64  187
 #define EM_TILEPRO 188
 #define EM_TILEGX  191
 
@@ -132,6 +131,15 @@ extern int dump_task_regs(struct task_struct *, elf_gregset_t *);
 struct linux_binprm;
 extern int arch_setup_additional_pages(struct linux_binprm *bprm,
 				       int executable_stack);
+#define ARCH_DLINFO \
+do { \
+	NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE); \
+} while (0)
+
+struct mm_struct;
+extern unsigned long arch_randomize_brk(struct mm_struct *mm);
+#define arch_randomize_brk arch_randomize_brk
+
 #ifdef CONFIG_COMPAT
 
 #define COMPAT_ELF_PLATFORM "tilegx-m32"
diff --git a/arch/tile/include/asm/fixmap.h b/arch/tile/include/asm/fixmap.h
index e16dbf9..c6b9c1b 100644
--- a/arch/tile/include/asm/fixmap.h
+++ b/arch/tile/include/asm/fixmap.h
@@ -78,14 +78,6 @@ enum fixed_addresses {
 #endif
 };
 
-extern void __set_fixmap(enum fixed_addresses idx,
-			 unsigned long phys, pgprot_t flags);
-
-#define set_fixmap(idx, phys) \
-		__set_fixmap(idx, phys, PAGE_KERNEL)
-#define clear_fixmap(idx) \
-		__set_fixmap(idx, 0, __pgprot(0))
-
 #define __FIXADDR_SIZE	(__end_of_permanent_fixed_addresses << PAGE_SHIFT)
 #define __FIXADDR_BOOT_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
 #define FIXADDR_START		(FIXADDR_TOP + PAGE_SIZE - __FIXADDR_SIZE)
diff --git a/arch/tile/include/asm/ftrace.h b/arch/tile/include/asm/ftrace.h
index 461459b..13a9bb8 100644
--- a/arch/tile/include/asm/ftrace.h
+++ b/arch/tile/include/asm/ftrace.h
@@ -15,6 +15,26 @@
 #ifndef _ASM_TILE_FTRACE_H
 #define _ASM_TILE_FTRACE_H
 
-/* empty */
+#ifdef CONFIG_FUNCTION_TRACER
+
+#define MCOUNT_ADDR ((unsigned long)(__mcount))
+#define MCOUNT_INSN_SIZE 8		/* sizeof mcount call */
+
+#ifndef __ASSEMBLY__
+extern void __mcount(void);
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+static inline unsigned long ftrace_call_adjust(unsigned long addr)
+{
+	return addr;
+}
+
+struct dyn_arch_ftrace {
+};
+#endif /*  CONFIG_DYNAMIC_FTRACE */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* CONFIG_FUNCTION_TRACER */
 
 #endif /* _ASM_TILE_FTRACE_H */
diff --git a/arch/tile/include/asm/futex.h b/arch/tile/include/asm/futex.h
index 5909ac3..1a6ef1b 100644
--- a/arch/tile/include/asm/futex.h
+++ b/arch/tile/include/asm/futex.h
@@ -43,6 +43,7 @@
 	    ".pushsection .fixup,\"ax\"\n"			\
 	    "0: { movei %0, %5; j 9f }\n"			\
 	    ".section __ex_table,\"a\"\n"			\
+	    ".align 8\n"					\
 	    ".quad 1b, 0b\n"					\
 	    ".popsection\n"					\
 	    "9:"						\
diff --git a/arch/tile/include/asm/homecache.h b/arch/tile/include/asm/homecache.h
index 7b77713..7ddd1b8 100644
--- a/arch/tile/include/asm/homecache.h
+++ b/arch/tile/include/asm/homecache.h
@@ -33,8 +33,7 @@ struct zone;
 
 /*
  * Is this page immutable (unwritable) and thus able to be cached more
- * widely than would otherwise be possible?  On tile64 this means we
- * mark the PTE to cache locally; on tilepro it means we have "nc" set.
+ * widely than would otherwise be possible?  This means we have "nc" set.
  */
 #define PAGE_HOME_IMMUTABLE -2
 
@@ -44,16 +43,8 @@ struct zone;
  */
 #define PAGE_HOME_INCOHERENT -3
 
-#if CHIP_HAS_CBOX_HOME_MAP()
 /* Home for the page is distributed via hash-for-home. */
 #define PAGE_HOME_HASH -4
-#endif
-
-/* Homing is unknown or unspecified.  Not valid for page_home(). */
-#define PAGE_HOME_UNKNOWN -5
-
-/* Home on the current cpu.  Not valid for page_home(). */
-#define PAGE_HOME_HERE -6
 
 /* Support wrapper to use instead of explicit hv_flush_remote(). */
 extern void flush_remote(unsigned long cache_pfn, unsigned long cache_length,
diff --git a/arch/tile/include/asm/io.h b/arch/tile/include/asm/io.h
index 3167291..9fe4349 100644
--- a/arch/tile/include/asm/io.h
+++ b/arch/tile/include/asm/io.h
@@ -19,7 +19,8 @@
 #include <linux/bug.h>
 #include <asm/page.h>
 
-#define IO_SPACE_LIMIT 0xfffffffful
+/* Maximum PCI I/O space address supported. */
+#define IO_SPACE_LIMIT 0xffffffff
 
 /*
  * Convert a physical pointer to a virtual kernel pointer for /dev/mem
@@ -254,7 +255,7 @@ static inline void writeq(u64 val, unsigned long addr)
 
 static inline void memset_io(volatile void *dst, int val, size_t len)
 {
-	int x;
+	size_t x;
 	BUG_ON((unsigned long)dst & 0x3);
 	val = (val & 0xff) * 0x01010101;
 	for (x = 0; x < len; x += 4)
@@ -264,7 +265,7 @@ static inline void memset_io(volatile void *dst, int val, size_t len)
 static inline void memcpy_fromio(void *dst, const volatile void __iomem *src,
 				 size_t len)
 {
-	int x;
+	size_t x;
 	BUG_ON((unsigned long)src & 0x3);
 	for (x = 0; x < len; x += 4)
 		*(u32 *)(dst + x) = readl(src + x);
@@ -273,7 +274,7 @@ static inline void memcpy_fromio(void *dst, const volatile void __iomem *src,
 static inline void memcpy_toio(volatile void __iomem *dst, const void *src,
 				size_t len)
 {
-	int x;
+	size_t x;
 	BUG_ON((unsigned long)dst & 0x3);
 	for (x = 0; x < len; x += 4)
 		writel(*(u32 *)(src + x), dst + x);
@@ -281,8 +282,108 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src,
 
 #endif
 
+#if CHIP_HAS_MMIO() && defined(CONFIG_TILE_PCI_IO)
+
+static inline u8 inb(unsigned long addr)
+{
+	return readb((volatile void __iomem *) addr);
+}
+
+static inline u16 inw(unsigned long addr)
+{
+	return readw((volatile void __iomem *) addr);
+}
+
+static inline u32 inl(unsigned long addr)
+{
+	return readl((volatile void __iomem *) addr);
+}
+
+static inline void outb(u8 b, unsigned long addr)
+{
+	writeb(b, (volatile void __iomem *) addr);
+}
+
+static inline void outw(u16 b, unsigned long addr)
+{
+	writew(b, (volatile void __iomem *) addr);
+}
+
+static inline void outl(u32 b, unsigned long addr)
+{
+	writel(b, (volatile void __iomem *) addr);
+}
+
+static inline void insb(unsigned long addr, void *buffer, int count)
+{
+	if (count) {
+		u8 *buf = buffer;
+		do {
+			u8 x = inb(addr);
+			*buf++ = x;
+		} while (--count);
+	}
+}
+
+static inline void insw(unsigned long addr, void *buffer, int count)
+{
+	if (count) {
+		u16 *buf = buffer;
+		do {
+			u16 x = inw(addr);
+			*buf++ = x;
+		} while (--count);
+	}
+}
+
+static inline void insl(unsigned long addr, void *buffer, int count)
+{
+	if (count) {
+		u32 *buf = buffer;
+		do {
+			u32 x = inl(addr);
+			*buf++ = x;
+		} while (--count);
+	}
+}
+
+static inline void outsb(unsigned long addr, const void *buffer, int count)
+{
+	if (count) {
+		const u8 *buf = buffer;
+		do {
+			outb(*buf++, addr);
+		} while (--count);
+	}
+}
+
+static inline void outsw(unsigned long addr, const void *buffer, int count)
+{
+	if (count) {
+		const u16 *buf = buffer;
+		do {
+			outw(*buf++, addr);
+		} while (--count);
+	}
+}
+
+static inline void outsl(unsigned long addr, const void *buffer, int count)
+{
+	if (count) {
+		const u32 *buf = buffer;
+		do {
+			outl(*buf++, addr);
+		} while (--count);
+	}
+}
+
+extern void __iomem *ioport_map(unsigned long port, unsigned int len);
+extern void ioport_unmap(void __iomem *addr);
+
+#else
+
 /*
- * The Tile architecture does not support IOPORT, even with PCI.
+ * The TilePro architecture does not support IOPORT, even with PCI.
  * Unfortunately we can't yet simply not declare these methods,
  * since some generic code that compiles into the kernel, but
  * we never run, uses them unconditionally.
@@ -290,7 +391,12 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src,
 
 static inline long ioport_panic(void)
 {
+#ifdef __tilegx__
+	panic("PCI IO space support is disabled. Configure the kernel with"
+	      " CONFIG_TILE_PCI_IO to enable it");
+#else
 	panic("inb/outb and friends do not exist on tile");
+#endif
 	return 0;
 }
 
@@ -335,13 +441,6 @@ static inline void outl(u32 b, unsigned long addr)
 	ioport_panic();
 }
 
-#define inb_p(addr)	inb(addr)
-#define inw_p(addr)	inw(addr)
-#define inl_p(addr)	inl(addr)
-#define outb_p(x, addr)	outb((x), (addr))
-#define outw_p(x, addr)	outw((x), (addr))
-#define outl_p(x, addr)	outl((x), (addr))
-
 static inline void insb(unsigned long addr, void *buffer, int count)
 {
 	ioport_panic();
@@ -372,6 +471,15 @@ static inline void outsl(unsigned long addr, const void *buffer, int count)
 	ioport_panic();
 }
 
+#endif /* CHIP_HAS_MMIO() && defined(CONFIG_TILE_PCI_IO) */
+
+#define inb_p(addr)	inb(addr)
+#define inw_p(addr)	inw(addr)
+#define inl_p(addr)	inl(addr)
+#define outb_p(x, addr)	outb((x), (addr))
+#define outw_p(x, addr)	outw((x), (addr))
+#define outl_p(x, addr)	outl((x), (addr))
+
 #define ioread16be(addr)	be16_to_cpu(ioread16(addr))
 #define ioread32be(addr)	be32_to_cpu(ioread32(addr))
 #define iowrite16be(v, addr)	iowrite16(be16_to_cpu(v), (addr))
diff --git a/arch/tile/include/asm/irqflags.h b/arch/tile/include/asm/irqflags.h
index c96f9bb..71af574 100644
--- a/arch/tile/include/asm/irqflags.h
+++ b/arch/tile/include/asm/irqflags.h
@@ -124,6 +124,12 @@
 DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
 #define INITIAL_INTERRUPTS_ENABLED (1ULL << INT_MEM_ERROR)
 
+#ifdef CONFIG_DEBUG_PREEMPT
+/* Due to inclusion issues, we can't rely on <linux/smp.h> here. */
+extern unsigned int debug_smp_processor_id(void);
+# define smp_processor_id() debug_smp_processor_id()
+#endif
+
 /* Disable interrupts. */
 #define arch_local_irq_disable() \
 	interrupt_mask_set_mask(LINUX_MASKABLE_INTERRUPTS)
@@ -132,9 +138,18 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
 #define arch_local_irq_disable_all() \
 	interrupt_mask_set_mask(-1ULL)
 
+/*
+ * Read the set of maskable interrupts.
+ * We avoid the preemption warning here via __this_cpu_ptr since even
+ * if irqs are already enabled, it's harmless to read the wrong cpu's
+ * enabled mask.
+ */
+#define arch_local_irqs_enabled() \
+	(*__this_cpu_ptr(&interrupts_enabled_mask))
+
 /* Re-enable all maskable interrupts. */
 #define arch_local_irq_enable() \
-	interrupt_mask_reset_mask(__get_cpu_var(interrupts_enabled_mask))
+	interrupt_mask_reset_mask(arch_local_irqs_enabled())
 
 /* Disable or enable interrupts based on flag argument. */
 #define arch_local_irq_restore(disabled) do { \
@@ -161,7 +176,7 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
 
 /* Prevent the given interrupt from being enabled next time we enable irqs. */
 #define arch_local_irq_mask(interrupt) \
-	(__get_cpu_var(interrupts_enabled_mask) &= ~(1ULL << (interrupt)))
+	this_cpu_and(interrupts_enabled_mask, ~(1ULL << (interrupt)))
 
 /* Prevent the given interrupt from being enabled immediately. */
 #define arch_local_irq_mask_now(interrupt) do { \
@@ -171,7 +186,7 @@ DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
 
 /* Allow the given interrupt to be enabled next time we enable irqs. */
 #define arch_local_irq_unmask(interrupt) \
-	(__get_cpu_var(interrupts_enabled_mask) |= (1ULL << (interrupt)))
+	this_cpu_or(interrupts_enabled_mask, (1ULL << (interrupt)))
 
 /* Allow the given interrupt to be enabled immediately, if !irqs_disabled. */
 #define arch_local_irq_unmask_now(interrupt) do { \
diff --git a/arch/tile/include/asm/hw_irq.h b/arch/tile/include/asm/kdebug.h
index 4fac5fbf..5bbbfa9 100644
--- a/arch/tile/include/asm/hw_irq.h
+++ b/arch/tile/include/asm/kdebug.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
  *
  *   This program is free software; you can redistribute it and/or
  *   modify it under the terms of the GNU General Public License
@@ -12,7 +12,17 @@
  *   more details.
  */
 
-#ifndef _ASM_TILE_HW_IRQ_H
-#define _ASM_TILE_HW_IRQ_H
+#ifndef _ASM_TILE_KDEBUG_H
+#define _ASM_TILE_KDEBUG_H
 
-#endif /* _ASM_TILE_HW_IRQ_H */
+#include <linux/notifier.h>
+
+enum die_val {
+	DIE_OOPS = 1,
+	DIE_BREAK,
+	DIE_SSTEPBP,
+	DIE_PAGE_FAULT,
+	DIE_COMPILED_BPT
+};
+
+#endif /* _ASM_TILE_KDEBUG_H */
diff --git a/arch/tile/include/asm/kgdb.h b/arch/tile/include/asm/kgdb.h
new file mode 100644
index 0000000..280c181
--- /dev/null
+++ b/arch/tile/include/asm/kgdb.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright 2013 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * TILE-Gx KGDB support.
+ */
+
+#ifndef __TILE_KGDB_H__
+#define __TILE_KGDB_H__
+
+#include <linux/kdebug.h>
+#include <arch/opcode.h>
+
+#define GDB_SIZEOF_REG		sizeof(unsigned long)
+
+/*
+ * TILE-Gx gdb is expecting the following register layout:
+ * 56 GPRs(R0 - R52, TP, SP, LR), 8 special GPRs(networks and ZERO),
+ * plus the PC and the faultnum.
+ *
+ * Even though kernel not use the 8 special GPRs, they need to be present
+ * in the registers sent for correct processing in the host-side gdb.
+ *
+ */
+#define DBG_MAX_REG_NUM		(56+8+2)
+#define NUMREGBYTES		(DBG_MAX_REG_NUM * GDB_SIZEOF_REG)
+
+/*
+ * BUFMAX defines the maximum number of characters in inbound/outbound
+ * buffers at least NUMREGBYTES*2 are needed for register packets,
+ * Longer buffer is needed to list all threads.
+ */
+#define BUFMAX			2048
+
+#define BREAK_INSTR_SIZE	TILEGX_BUNDLE_SIZE_IN_BYTES
+
+/*
+ * Require cache flush for set/clear a software breakpoint or write memory.
+ */
+#define CACHE_FLUSH_IS_SAFE	1
+
+/*
+ * The compiled-in breakpoint instruction can be used to "break" into
+ * the debugger via magic system request key (sysrq-G).
+ */
+static tile_bundle_bits compiled_bpt = TILEGX_BPT_BUNDLE | DIE_COMPILED_BPT;
+
+enum tilegx_regnum {
+	TILEGX_PC_REGNUM = TREG_LAST_GPR + 9,
+	TILEGX_FAULTNUM_REGNUM,
+};
+
+/*
+ * Generate a breakpoint exception to "break" into the debugger.
+ */
+static inline void arch_kgdb_breakpoint(void)
+{
+	asm volatile (".quad %0\n\t"
+		      ::""(compiled_bpt));
+}
+
+#endif /* __TILE_KGDB_H__ */
diff --git a/arch/tile/include/asm/kprobes.h b/arch/tile/include/asm/kprobes.h
new file mode 100644
index 0000000..d8f9a83
--- /dev/null
+++ b/arch/tile/include/asm/kprobes.h
@@ -0,0 +1,79 @@
+/*
+ * arch/tile/include/asm/kprobes.h
+ *
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_KPROBES_H
+#define _ASM_TILE_KPROBES_H
+
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/percpu.h>
+
+#include <arch/opcode.h>
+
+#define __ARCH_WANT_KPROBES_INSN_SLOT
+#define MAX_INSN_SIZE			2
+
+#define kretprobe_blacklist_size 0
+
+typedef tile_bundle_bits kprobe_opcode_t;
+
+#define flush_insn_slot(p)						\
+	flush_icache_range((unsigned long)p->addr,			\
+			   (unsigned long)p->addr +			\
+			   (MAX_INSN_SIZE * sizeof(kprobe_opcode_t)))
+
+struct kprobe;
+
+/* Architecture specific copy of original instruction. */
+struct arch_specific_insn {
+	kprobe_opcode_t *insn;
+};
+
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned long status;
+	unsigned long saved_pc;
+};
+
+#define MAX_JPROBES_STACK_SIZE 128
+#define MAX_JPROBES_STACK_ADDR \
+	(((unsigned long)current_thread_info()) + THREAD_SIZE - 32 \
+		- sizeof(struct pt_regs))
+
+#define MIN_JPROBES_STACK_SIZE(ADDR)					\
+	((((ADDR) + MAX_JPROBES_STACK_SIZE) > MAX_JPROBES_STACK_ADDR)	\
+		? MAX_JPROBES_STACK_ADDR - (ADDR)			\
+		: MAX_JPROBES_STACK_SIZE)
+
+/* per-cpu kprobe control block. */
+struct kprobe_ctlblk {
+	unsigned long kprobe_status;
+	unsigned long kprobe_saved_pc;
+	unsigned long jprobe_saved_sp;
+	struct prev_kprobe prev_kprobe;
+	struct pt_regs jprobe_saved_regs;
+	char jprobes_stack[MAX_JPROBES_STACK_SIZE];
+};
+
+extern tile_bundle_bits breakpoint2_insn;
+extern tile_bundle_bits breakpoint_insn;
+
+void arch_remove_kprobe(struct kprobe *);
+
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+			     unsigned long val, void *data);
+
+#endif /* _ASM_TILE_KPROBES_H */
diff --git a/arch/tile/include/asm/mmu.h b/arch/tile/include/asm/mmu.h
index e2c7890..0cab118 100644
--- a/arch/tile/include/asm/mmu.h
+++ b/arch/tile/include/asm/mmu.h
@@ -22,6 +22,7 @@ struct mm_context {
 	 * semaphore but atomically, but it is conservatively set.
 	 */
 	unsigned long priority_cached;
+	unsigned long vdso_base;
 };
 
 typedef struct mm_context mm_context_t;
diff --git a/arch/tile/include/asm/mmu_context.h b/arch/tile/include/asm/mmu_context.h
index 37f0b74..4734215 100644
--- a/arch/tile/include/asm/mmu_context.h
+++ b/arch/tile/include/asm/mmu_context.h
@@ -45,7 +45,7 @@ static inline void __install_page_table(pgd_t *pgdir, int asid, pgprot_t prot)
 
 static inline void install_page_table(pgd_t *pgdir, int asid)
 {
-	pte_t *ptep = virt_to_pte(NULL, (unsigned long)pgdir);
+	pte_t *ptep = virt_to_kpte((unsigned long)pgdir);
 	__install_page_table(pgdir, asid, *ptep);
 }
 
diff --git a/arch/tile/include/asm/mmzone.h b/arch/tile/include/asm/mmzone.h
index 9d3dbce..804f109 100644
--- a/arch/tile/include/asm/mmzone.h
+++ b/arch/tile/include/asm/mmzone.h
@@ -42,7 +42,7 @@ static inline int pfn_to_nid(unsigned long pfn)
 
 #define kern_addr_valid(kaddr)	virt_addr_valid((void *)kaddr)
 
-static inline int pfn_valid(int pfn)
+static inline int pfn_valid(unsigned long pfn)
 {
 	int nid = pfn_to_nid(pfn);
 
diff --git a/arch/tile/include/asm/page.h b/arch/tile/include/asm/page.h
index dd033a4..6727680 100644
--- a/arch/tile/include/asm/page.h
+++ b/arch/tile/include/asm/page.h
@@ -39,6 +39,12 @@
 #define HPAGE_MASK	(~(HPAGE_SIZE - 1))
 
 /*
+ * We do define AT_SYSINFO_EHDR to support vDSO,
+ * but don't use the gate mechanism.
+ */
+#define __HAVE_ARCH_GATE_AREA		1
+
+/*
  * If the Kconfig doesn't specify, set a maximum zone order that
  * is enough so that we can create huge pages from small pages given
  * the respective sizes of the two page types.  See <linux/mmzone.h>.
@@ -142,8 +148,12 @@ static inline __attribute_const__ int get_order(unsigned long size)
 #define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
 #endif
 
+/* Allow overriding how much VA or PA the kernel will use. */
+#define MAX_PA_WIDTH CHIP_PA_WIDTH()
+#define MAX_VA_WIDTH CHIP_VA_WIDTH()
+
 /* Each memory controller has PAs distinct in their high bits. */
-#define NR_PA_HIGHBIT_SHIFT (CHIP_PA_WIDTH() - CHIP_LOG_NUM_MSHIMS())
+#define NR_PA_HIGHBIT_SHIFT (MAX_PA_WIDTH - CHIP_LOG_NUM_MSHIMS())
 #define NR_PA_HIGHBIT_VALUES (1 << CHIP_LOG_NUM_MSHIMS())
 #define __pa_to_highbits(pa) ((phys_addr_t)(pa) >> NR_PA_HIGHBIT_SHIFT)
 #define __pfn_to_highbits(pfn) ((pfn) >> (NR_PA_HIGHBIT_SHIFT - PAGE_SHIFT))
@@ -154,7 +164,7 @@ static inline __attribute_const__ int get_order(unsigned long size)
  * We reserve the lower half of memory for user-space programs, and the
  * upper half for system code.  We re-map all of physical memory in the
  * upper half, which takes a quarter of our VA space.  Then we have
- * the vmalloc regions.  The supervisor code lives at 0xfffffff700000000,
+ * the vmalloc regions.  The supervisor code lives at the highest address,
  * with the hypervisor above that.
  *
  * Loadable kernel modules are placed immediately after the static
@@ -166,26 +176,18 @@ static inline __attribute_const__ int get_order(unsigned long size)
  * Similarly, for now we don't play any struct page mapping games.
  */
 
-#if CHIP_PA_WIDTH() + 2 > CHIP_VA_WIDTH()
+#if MAX_PA_WIDTH + 2 > MAX_VA_WIDTH
 # error Too much PA to map with the VA available!
 #endif
-#define HALF_VA_SPACE           (_AC(1, UL) << (CHIP_VA_WIDTH() - 1))
 
-#define MEM_LOW_END		(HALF_VA_SPACE - 1)         /* low half */
-#define MEM_HIGH_START		(-HALF_VA_SPACE)            /* high half */
-#define PAGE_OFFSET		MEM_HIGH_START
-#define FIXADDR_BASE		_AC(0xfffffff400000000, UL) /* 4 GB */
-#define FIXADDR_TOP		_AC(0xfffffff500000000, UL) /* 4 GB */
+#define PAGE_OFFSET		(-(_AC(1, UL) << (MAX_VA_WIDTH - 1)))
+#define KERNEL_HIGH_VADDR	_AC(0xfffffff800000000, UL)  /* high 32GB */
+#define FIXADDR_BASE		(KERNEL_HIGH_VADDR - 0x300000000) /* 4 GB */
+#define FIXADDR_TOP		(KERNEL_HIGH_VADDR - 0x200000000) /* 4 GB */
 #define _VMALLOC_START		FIXADDR_TOP
-#define HUGE_VMAP_BASE		_AC(0xfffffff600000000, UL) /* 4 GB */
-#define MEM_SV_START		_AC(0xfffffff700000000, UL) /* 256 MB */
-#define MEM_SV_INTRPT		MEM_SV_START
-#define MEM_MODULE_START	_AC(0xfffffff710000000, UL) /* 256 MB */
+#define MEM_SV_START		(KERNEL_HIGH_VADDR - 0x100000000) /* 256 MB */
+#define MEM_MODULE_START	(MEM_SV_START + (256*1024*1024)) /* 256 MB */
 #define MEM_MODULE_END		(MEM_MODULE_START + (256*1024*1024))
-#define MEM_HV_START		_AC(0xfffffff800000000, UL) /* 32 GB */
-
-/* Highest DTLB address we will use */
-#define KERNEL_HIGH_VADDR	MEM_SV_START
 
 #else /* !__tilegx__ */
 
@@ -207,25 +209,18 @@ static inline __attribute_const__ int get_order(unsigned long size)
  * values, and after that, we show "typical" values, since the actual
  * addresses depend on kernel #defines.
  *
- * MEM_HV_INTRPT                   0xfe000000
- * MEM_SV_INTRPT (kernel code)     0xfd000000
+ * MEM_HV_START                    0xfe000000
+ * MEM_SV_START  (kernel code)     0xfd000000
  * MEM_USER_INTRPT (user vector)   0xfc000000
- * FIX_KMAP_xxx                    0xf8000000 (via NR_CPUS * KM_TYPE_NR)
- * PKMAP_BASE                      0xf7000000 (via LAST_PKMAP)
- * HUGE_VMAP                       0xf3000000 (via CONFIG_NR_HUGE_VMAPS)
- * VMALLOC_START                   0xf0000000 (via __VMALLOC_RESERVE)
+ * FIX_KMAP_xxx                    0xfa000000 (via NR_CPUS * KM_TYPE_NR)
+ * PKMAP_BASE                      0xf9000000 (via LAST_PKMAP)
+ * VMALLOC_START                   0xf7000000 (via VMALLOC_RESERVE)
  * mapped LOWMEM                   0xc0000000
  */
 
 #define MEM_USER_INTRPT		_AC(0xfc000000, UL)
-#if CONFIG_KERNEL_PL == 1
-#define MEM_SV_INTRPT		_AC(0xfd000000, UL)
-#define MEM_HV_INTRPT		_AC(0xfe000000, UL)
-#else
-#define MEM_GUEST_INTRPT	_AC(0xfd000000, UL)
-#define MEM_SV_INTRPT		_AC(0xfe000000, UL)
-#define MEM_HV_INTRPT		_AC(0xff000000, UL)
-#endif
+#define MEM_SV_START		_AC(0xfd000000, UL)
+#define MEM_HV_START		_AC(0xfe000000, UL)
 
 #define INTRPT_SIZE		0x4000
 
@@ -246,7 +241,7 @@ static inline __attribute_const__ int get_order(unsigned long size)
 
 #endif /* __tilegx__ */
 
-#ifndef __ASSEMBLY__
+#if !defined(__ASSEMBLY__) && !defined(VDSO_BUILD)
 
 #ifdef CONFIG_HIGHMEM
 
@@ -332,6 +327,7 @@ static inline int pfn_valid(unsigned long pfn)
 
 struct mm_struct;
 extern pte_t *virt_to_pte(struct mm_struct *mm, unsigned long addr);
+extern pte_t *virt_to_kpte(unsigned long kaddr);
 
 #endif /* !__ASSEMBLY__ */
 
diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h
index 54a9242..dfedd7a 100644
--- a/arch/tile/include/asm/pci.h
+++ b/arch/tile/include/asm/pci.h
@@ -17,7 +17,6 @@
 
 #include <linux/dma-mapping.h>
 #include <linux/pci.h>
-#include <linux/numa.h>
 #include <asm-generic/pci_iomap.h>
 
 #ifndef __tilegx__
@@ -29,7 +28,6 @@ struct pci_controller {
 	int index;		/* PCI domain number */
 	struct pci_bus *root_bus;
 
-	int first_busno;
 	int last_busno;
 
 	int hv_cfg_fd[2];	/* config{0,1} fds for this PCIe controller */
@@ -124,6 +122,11 @@ static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {}
  * the CPA plus TILE_PCI_MEM_MAP_BASE_OFFSET. To support 32-bit
  * devices, we create a separate map region that handles the low
  * 4GB.
+ *
+ * This design lets us avoid the "PCI hole" problem where the host bridge
+ * won't pass DMA traffic with target addresses that happen to fall within the
+ * BAR space. This enables us to use all the physical memory for DMA, instead
+ * of wasting the same amount of physical memory as the BAR window size.
  */
 #define	TILE_PCI_MEM_MAP_BASE_OFFSET	(1ULL << CHIP_PA_WIDTH())
 
@@ -145,6 +148,10 @@ struct pci_controller {
 
 	int pio_mem_index;	/* PIO region index for memory access */
 
+#ifdef CONFIG_TILE_PCI_IO
+	int pio_io_index;	/* PIO region index for I/O space access */
+#endif
+
 	/*
 	 * Mem-Map regions for all the memory controllers so that Linux can
 	 * map all of its physical memory space to the PCI bus.
@@ -154,6 +161,10 @@ struct pci_controller {
 	int index;		/* PCI domain number */
 	struct pci_bus *root_bus;
 
+	/* PCI I/O space resource for this controller. */
+	struct resource io_space;
+	char io_space_name[32];
+
 	/* PCI memory space resource for this controller. */
 	struct resource mem_space;
 	char mem_space_name[32];
@@ -166,13 +177,11 @@ struct pci_controller {
 
 	/* Table that maps the INTx numbers to Linux irq numbers. */
 	int irq_intx_table[4];
-
-	/* Address ranges that are routed to this controller/bridge. */
-	struct resource mem_resources[3];
 };
 
 extern struct pci_controller pci_controllers[TILEGX_NUM_TRIO * TILEGX_TRIO_PCIES];
 extern gxio_trio_context_t trio_contexts[TILEGX_NUM_TRIO];
+extern int num_trio_shims;
 
 extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
 
@@ -211,7 +220,8 @@ static inline int pcibios_assign_all_busses(void)
 }
 
 #define PCIBIOS_MIN_MEM		0
-#define PCIBIOS_MIN_IO		0
+/* Minimum PCI I/O address, starting at the page boundary. */
+#define PCIBIOS_MIN_IO		PAGE_SIZE
 
 /* Use any cpu for PCI. */
 #define cpumask_of_pcibus(bus) cpu_online_mask
diff --git a/arch/tile/include/asm/percpu.h b/arch/tile/include/asm/percpu.h
index 63294f5..4f7ae39 100644
--- a/arch/tile/include/asm/percpu.h
+++ b/arch/tile/include/asm/percpu.h
@@ -15,9 +15,37 @@
 #ifndef _ASM_TILE_PERCPU_H
 #define _ASM_TILE_PERCPU_H
 
-register unsigned long __my_cpu_offset __asm__("tp");
-#define __my_cpu_offset __my_cpu_offset
-#define set_my_cpu_offset(tp) (__my_cpu_offset = (tp))
+register unsigned long my_cpu_offset_reg asm("tp");
+
+#ifdef CONFIG_PREEMPT
+/*
+ * For full preemption, we can't just use the register variable
+ * directly, since we need barrier() to hazard against it, causing the
+ * compiler to reload anything computed from a previous "tp" value.
+ * But we also don't want to use volatile asm, since we'd like the
+ * compiler to be able to cache the value across multiple percpu reads.
+ * So we use a fake stack read as a hazard against barrier().
+ * The 'U' constraint is like 'm' but disallows postincrement.
+ */
+static inline unsigned long __my_cpu_offset(void)
+{
+	unsigned long tp;
+	register unsigned long *sp asm("sp");
+	asm("move %0, tp" : "=r" (tp) : "U" (*sp));
+	return tp;
+}
+#define __my_cpu_offset __my_cpu_offset()
+#else
+/*
+ * We don't need to hazard against barrier() since "tp" doesn't ever
+ * change with PREEMPT_NONE, and with PREEMPT_VOLUNTARY it only
+ * changes at function call points, at which we are already re-reading
+ * the value of "tp" due to "my_cpu_offset_reg" being a global variable.
+ */
+#define __my_cpu_offset my_cpu_offset_reg
+#endif
+
+#define set_my_cpu_offset(tp) (my_cpu_offset_reg = (tp))
 
 #include <asm-generic/percpu.h>
 
diff --git a/arch/tile/include/asm/pgtable_32.h b/arch/tile/include/asm/pgtable_32.h
index 4ce4a7a..d26a422 100644
--- a/arch/tile/include/asm/pgtable_32.h
+++ b/arch/tile/include/asm/pgtable_32.h
@@ -55,17 +55,9 @@
 #define PKMAP_BASE   ((FIXADDR_BOOT_START - PAGE_SIZE*LAST_PKMAP) & PGDIR_MASK)
 
 #ifdef CONFIG_HIGHMEM
-# define __VMAPPING_END	(PKMAP_BASE & ~(HPAGE_SIZE-1))
+# define _VMALLOC_END	(PKMAP_BASE & ~(HPAGE_SIZE-1))
 #else
-# define __VMAPPING_END	(FIXADDR_START & ~(HPAGE_SIZE-1))
-#endif
-
-#ifdef CONFIG_HUGEVMAP
-#define HUGE_VMAP_END	__VMAPPING_END
-#define HUGE_VMAP_BASE	(HUGE_VMAP_END - CONFIG_NR_HUGE_VMAPS * HPAGE_SIZE)
-#define _VMALLOC_END	HUGE_VMAP_BASE
-#else
-#define _VMALLOC_END	__VMAPPING_END
+# define _VMALLOC_END	(FIXADDR_START & ~(HPAGE_SIZE-1))
 #endif
 
 /*
@@ -84,10 +76,12 @@ extern unsigned long VMALLOC_RESERVE /* = CONFIG_VMALLOC_RESERVE */;
 /* We have no pmd or pud since we are strictly a two-level page table */
 #include <asm-generic/pgtable-nopmd.h>
 
+static inline int pud_huge_page(pud_t pud)	{ return 0; }
+
 /* We don't define any pgds for these addresses. */
 static inline int pgd_addr_invalid(unsigned long addr)
 {
-	return addr >= MEM_HV_INTRPT;
+	return addr >= MEM_HV_START;
 }
 
 /*
diff --git a/arch/tile/include/asm/pgtable_64.h b/arch/tile/include/asm/pgtable_64.h
index 2492fa5..2c8a9cd 100644
--- a/arch/tile/include/asm/pgtable_64.h
+++ b/arch/tile/include/asm/pgtable_64.h
@@ -52,17 +52,24 @@
  * memory allocation code).  The vmalloc code puts in an internal
  * guard page between each allocation.
  */
-#define _VMALLOC_END	HUGE_VMAP_BASE
+#define _VMALLOC_END	MEM_SV_START
 #define VMALLOC_END	_VMALLOC_END
 #define VMALLOC_START	_VMALLOC_START
 
-#define HUGE_VMAP_END	(HUGE_VMAP_BASE + PGDIR_SIZE)
-
 #ifndef __ASSEMBLY__
 
 /* We have no pud since we are a three-level page table. */
 #include <asm-generic/pgtable-nopud.h>
 
+/*
+ * pmds are the same as pgds and ptes, so converting is a no-op.
+ */
+#define pmd_pte(pmd) (pmd)
+#define pmdp_ptep(pmdp) (pmdp)
+#define pte_pmd(pte) (pte)
+
+#define pud_pte(pud) ((pud).pgd)
+
 static inline int pud_none(pud_t pud)
 {
 	return pud_val(pud) == 0;
@@ -73,6 +80,11 @@ static inline int pud_present(pud_t pud)
 	return pud_val(pud) & _PAGE_PRESENT;
 }
 
+static inline int pud_huge_page(pud_t pud)
+{
+	return pud_val(pud) & _PAGE_HUGE_PAGE;
+}
+
 #define pmd_ERROR(e) \
 	pr_err("%s:%d: bad pmd 0x%016llx.\n", __FILE__, __LINE__, pmd_val(e))
 
@@ -89,6 +101,9 @@ static inline int pud_bad(pud_t pud)
 /* Return the page-table frame number (ptfn) that a pud_t points at. */
 #define pud_ptfn(pud) hv_pte_get_ptfn((pud).pgd)
 
+/* Return the page frame number (pfn) that a pud_t points at. */
+#define pud_pfn(pud) pte_pfn(pud_pte(pud))
+
 /*
  * A given kernel pud_t maps to a kernel pmd_t table at a specific
  * virtual address.  Since kernel pmd_t tables can be aligned at
@@ -123,8 +138,7 @@ static inline unsigned long pgd_addr_normalize(unsigned long addr)
 /* We don't define any pgds for these addresses. */
 static inline int pgd_addr_invalid(unsigned long addr)
 {
-	return addr >= MEM_HV_START ||
-		(addr > MEM_LOW_END && addr < MEM_HIGH_START);
+	return addr >= KERNEL_HIGH_VADDR || addr != pgd_addr_normalize(addr);
 }
 
 /*
@@ -152,13 +166,6 @@ static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
 	return hv_pte(__insn_exch(&ptep->val, 0UL));
 }
 
-/*
- * pmds are the same as pgds and ptes, so converting is a no-op.
- */
-#define pmd_pte(pmd) (pmd)
-#define pmdp_ptep(pmdp) (pmdp)
-#define pte_pmd(pte) (pte)
-
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_TILE_PGTABLE_64_H */
diff --git a/arch/tile/include/asm/processor.h b/arch/tile/include/asm/processor.h
index b3f1049..4232363 100644
--- a/arch/tile/include/asm/processor.h
+++ b/arch/tile/include/asm/processor.h
@@ -15,6 +15,8 @@
 #ifndef _ASM_TILE_PROCESSOR_H
 #define _ASM_TILE_PROCESSOR_H
 
+#include <arch/chip.h>
+
 #ifndef __ASSEMBLY__
 
 /*
@@ -25,7 +27,6 @@
 #include <asm/ptrace.h>
 #include <asm/percpu.h>
 
-#include <arch/chip.h>
 #include <arch/spr_def.h>
 
 struct task_struct;
@@ -110,18 +111,16 @@ struct thread_struct {
 	unsigned long long interrupt_mask;
 	/* User interrupt-control 0 state */
 	unsigned long intctrl_0;
-#if CHIP_HAS_PROC_STATUS_SPR()
+	/* Is this task currently doing a backtrace? */
+	bool in_backtrace;
 	/* Any other miscellaneous processor state bits */
 	unsigned long proc_status;
-#endif
 #if !CHIP_HAS_FIXED_INTVEC_BASE()
 	/* Interrupt base for PL0 interrupts */
 	unsigned long interrupt_vector_base;
 #endif
-#if CHIP_HAS_TILE_RTF_HWM()
 	/* Tile cache retry fifo high-water mark */
 	unsigned long tile_rtf_hwm;
-#endif
 #if CHIP_HAS_DSTREAM_PF()
 	/* Data stream prefetch control */
 	unsigned long dstream_pf;
@@ -134,21 +133,16 @@ struct thread_struct {
 	/* Async DMA TLB fault information */
 	struct async_tlb dma_async_tlb;
 #endif
-#if CHIP_HAS_SN_PROC()
-	/* Was static network processor when we were switched out? */
-	int sn_proc_running;
-	/* Async SNI TLB fault information */
-	struct async_tlb sn_async_tlb;
-#endif
 };
 
 #endif /* !__ASSEMBLY__ */
 
 /*
  * Start with "sp" this many bytes below the top of the kernel stack.
- * This preserves the invariant that a called function may write to *sp.
+ * This allows us to be cache-aware when handling the initial save
+ * of the pt_regs value to the stack.
  */
-#define STACK_TOP_DELTA 8
+#define STACK_TOP_DELTA 64
 
 /*
  * When entering the kernel via a fault, start with the top of the
@@ -164,7 +158,7 @@ struct thread_struct {
 #ifndef __ASSEMBLY__
 
 #ifdef __tilegx__
-#define TASK_SIZE_MAX		(MEM_LOW_END + 1)
+#define TASK_SIZE_MAX		(_AC(1, UL) << (MAX_VA_WIDTH - 1))
 #else
 #define TASK_SIZE_MAX		PAGE_OFFSET
 #endif
@@ -178,10 +172,10 @@ struct thread_struct {
 #define TASK_SIZE		TASK_SIZE_MAX
 #endif
 
-/* We provide a minimal "vdso" a la x86; just the sigreturn code for now. */
-#define VDSO_BASE		(TASK_SIZE - PAGE_SIZE)
+#define VDSO_BASE	((unsigned long)current->active_mm->context.vdso_base)
+#define VDSO_SYM(x)	(VDSO_BASE + (unsigned long)(x))
 
-#define STACK_TOP		VDSO_BASE
+#define STACK_TOP		TASK_SIZE
 
 /* STACK_TOP_MAX is used temporarily in execve and should not check COMPAT. */
 #define STACK_TOP_MAX		TASK_SIZE_MAX
@@ -232,21 +226,28 @@ extern int do_work_pending(struct pt_regs *regs, u32 flags);
 unsigned long get_wchan(struct task_struct *p);
 
 /* Return initial ksp value for given task. */
-#define task_ksp0(task) ((unsigned long)(task)->stack + THREAD_SIZE)
+#define task_ksp0(task) \
+	((unsigned long)(task)->stack + THREAD_SIZE - STACK_TOP_DELTA)
 
 /* Return some info about the user process TASK. */
-#define KSTK_TOP(task)	(task_ksp0(task) - STACK_TOP_DELTA)
 #define task_pt_regs(task) \
-  ((struct pt_regs *)(task_ksp0(task) - KSTK_PTREGS_GAP) - 1)
+	((struct pt_regs *)(task_ksp0(task) - KSTK_PTREGS_GAP) - 1)
 #define current_pt_regs()                                   \
-  ((struct pt_regs *)((stack_pointer | (THREAD_SIZE - 1)) - \
-                      (KSTK_PTREGS_GAP - 1)) - 1)
+	((struct pt_regs *)((stack_pointer | (THREAD_SIZE - 1)) - \
+			    STACK_TOP_DELTA - (KSTK_PTREGS_GAP - 1)) - 1)
 #define task_sp(task)	(task_pt_regs(task)->sp)
 #define task_pc(task)	(task_pt_regs(task)->pc)
 /* Aliases for pc and sp (used in fs/proc/array.c) */
 #define KSTK_EIP(task)	task_pc(task)
 #define KSTK_ESP(task)	task_sp(task)
 
+/* Fine-grained unaligned JIT support */
+#define GET_UNALIGN_CTL(tsk, adr)	get_unalign_ctl((tsk), (adr))
+#define SET_UNALIGN_CTL(tsk, val)	set_unalign_ctl((tsk), (val))
+
+extern int get_unalign_ctl(struct task_struct *tsk, unsigned long adr);
+extern int set_unalign_ctl(struct task_struct *tsk, unsigned int val);
+
 /* Standard format for printing registers and other word-size data. */
 #ifdef __tilegx__
 # define REGFMT "0x%016lx"
@@ -275,7 +276,6 @@ extern char chip_model[64];
 /* Data on which physical memory controller corresponds to which NUMA node. */
 extern int node_controller[];
 
-#if CHIP_HAS_CBOX_HOME_MAP()
 /* Does the heap allocator return hash-for-home pages by default? */
 extern int hash_default;
 
@@ -285,11 +285,6 @@ extern int kstack_hash;
 /* Does MAP_ANONYMOUS return hash-for-home pages by default? */
 #define uheap_hash hash_default
 
-#else
-#define hash_default 0
-#define kstack_hash 0
-#define uheap_hash 0
-#endif
 
 /* Are we using huge pages in the TLB for kernel data? */
 extern int kdata_huge;
@@ -337,7 +332,6 @@ extern int kdata_huge;
 
 /*
  * Provide symbolic constants for PLs.
- * Note that assembly code assumes that USER_PL is zero.
  */
 #define USER_PL 0
 #if CONFIG_KERNEL_PL == 2
@@ -346,20 +340,38 @@ extern int kdata_huge;
 #define KERNEL_PL CONFIG_KERNEL_PL
 
 /* SYSTEM_SAVE_K_0 holds the current cpu number ORed with ksp0. */
-#define CPU_LOG_MASK_VALUE 12
-#define CPU_MASK_VALUE ((1 << CPU_LOG_MASK_VALUE) - 1)
-#if CONFIG_NR_CPUS > CPU_MASK_VALUE
-# error Too many cpus!
+#ifdef __tilegx__
+#define CPU_SHIFT 48
+#if CHIP_VA_WIDTH() > CPU_SHIFT
+# error Too many VA bits!
 #endif
+#define MAX_CPU_ID ((1 << (64 - CPU_SHIFT)) - 1)
+#define raw_smp_processor_id() \
+	((int)(__insn_mfspr(SPR_SYSTEM_SAVE_K_0) >> CPU_SHIFT))
+#define get_current_ksp0() \
+	((unsigned long)(((long)__insn_mfspr(SPR_SYSTEM_SAVE_K_0) << \
+			  (64 - CPU_SHIFT)) >> (64 - CPU_SHIFT)))
+#define next_current_ksp0(task) ({ \
+	unsigned long __ksp0 = task_ksp0(task) & ((1UL << CPU_SHIFT) - 1); \
+	unsigned long __cpu = (long)raw_smp_processor_id() << CPU_SHIFT; \
+	__ksp0 | __cpu; \
+})
+#else
+#define LOG2_NR_CPU_IDS 6
+#define MAX_CPU_ID ((1 << LOG2_NR_CPU_IDS) - 1)
 #define raw_smp_processor_id() \
-	((int)__insn_mfspr(SPR_SYSTEM_SAVE_K_0) & CPU_MASK_VALUE)
+	((int)__insn_mfspr(SPR_SYSTEM_SAVE_K_0) & MAX_CPU_ID)
 #define get_current_ksp0() \
-	(__insn_mfspr(SPR_SYSTEM_SAVE_K_0) & ~CPU_MASK_VALUE)
+	(__insn_mfspr(SPR_SYSTEM_SAVE_K_0) & ~MAX_CPU_ID)
 #define next_current_ksp0(task) ({ \
 	unsigned long __ksp0 = task_ksp0(task); \
 	int __cpu = raw_smp_processor_id(); \
-	BUG_ON(__ksp0 & CPU_MASK_VALUE); \
+	BUG_ON(__ksp0 & MAX_CPU_ID); \
 	__ksp0 | __cpu; \
 })
+#endif
+#if CONFIG_NR_CPUS > (MAX_CPU_ID + 1)
+# error Too many cpus!
+#endif
 
 #endif /* _ASM_TILE_PROCESSOR_H */
diff --git a/arch/tile/include/asm/ptrace.h b/arch/tile/include/asm/ptrace.h
index fd41226..b9620c0 100644
--- a/arch/tile/include/asm/ptrace.h
+++ b/arch/tile/include/asm/ptrace.h
@@ -33,12 +33,13 @@ typedef unsigned long pt_reg_t;
 
 #ifndef __ASSEMBLY__
 
+#define regs_return_value(regs) ((regs)->regs[0])
 #define instruction_pointer(regs) ((regs)->pc)
 #define profile_pc(regs) instruction_pointer(regs)
 #define user_stack_pointer(regs) ((regs)->sp)
 
 /* Does the process account for user or for system time? */
-#define user_mode(regs) (EX1_PL((regs)->ex1) == USER_PL)
+#define user_mode(regs) (EX1_PL((regs)->ex1) < KERNEL_PL)
 
 /* Fill in a struct pt_regs with the current kernel registers. */
 struct pt_regs *get_pt_regs(struct pt_regs *);
@@ -79,8 +80,7 @@ extern void single_step_execve(void);
 
 struct task_struct;
 
-extern void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs,
-			 int error_code);
+extern void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs);
 
 #ifdef __tilegx__
 /* We need this since sigval_t has a user pointer in it, for GETSIGINFO etc. */
diff --git a/arch/tile/include/asm/sections.h b/arch/tile/include/asm/sections.h
index 7d8a935..5d5d3b7 100644
--- a/arch/tile/include/asm/sections.h
+++ b/arch/tile/include/asm/sections.h
@@ -25,10 +25,16 @@ extern char _sinitdata[], _einitdata[];
 /* Write-once data is writable only till the end of initialization. */
 extern char __w1data_begin[], __w1data_end[];
 
+extern char vdso_start[], vdso_end[];
+#ifdef CONFIG_COMPAT
+extern char vdso32_start[], vdso32_end[];
+#endif
 
 /* Not exactly sections, but PC comparison points in the code. */
 extern char __rt_sigreturn[], __rt_sigreturn_end[];
-#ifndef __tilegx__
+#ifdef __tilegx__
+extern char __start_unalign_asm_code[], __end_unalign_asm_code[];
+#else
 extern char sys_cmpxchg[], __sys_cmpxchg_end[];
 extern char __sys_cmpxchg_grab_lock[];
 extern char __start_atomic_asm_code[], __end_atomic_asm_code[];
diff --git a/arch/tile/include/asm/setup.h b/arch/tile/include/asm/setup.h
index d048888..e989090 100644
--- a/arch/tile/include/asm/setup.h
+++ b/arch/tile/include/asm/setup.h
@@ -24,9 +24,8 @@
  */
 #define MAXMEM_PFN	PFN_DOWN(MAXMEM)
 
+int tile_console_write(const char *buf, int count);
 void early_panic(const char *fmt, ...);
-void warn_early_printk(void);
-void __init disable_early_printk(void);
 
 /* Init-time routine to do tile-specific per-cpu setup. */
 void setup_cpu(int boot);
diff --git a/arch/tile/include/asm/smp.h b/arch/tile/include/asm/smp.h
index 1aa759a..9a326b6 100644
--- a/arch/tile/include/asm/smp.h
+++ b/arch/tile/include/asm/smp.h
@@ -101,10 +101,8 @@ void print_disabled_cpus(void);
 extern struct cpumask cpu_lotar_map;
 #define cpu_is_valid_lotar(cpu) cpumask_test_cpu((cpu), &cpu_lotar_map)
 
-#if CHIP_HAS_CBOX_HOME_MAP()
 /* Which processors are used for hash-for-home mapping */
 extern struct cpumask hash_for_home_map;
-#endif
 
 /* Which cpus can have their cache flushed by hv_flush_remote(). */
 extern struct cpumask cpu_cacheable_map;
diff --git a/arch/tile/include/asm/spinlock_64.h b/arch/tile/include/asm/spinlock_64.h
index 5f8b6a0..9a12b9c 100644
--- a/arch/tile/include/asm/spinlock_64.h
+++ b/arch/tile/include/asm/spinlock_64.h
@@ -27,7 +27,7 @@
  * Return the "current" portion of a ticket lock value,
  * i.e. the number that currently owns the lock.
  */
-static inline int arch_spin_current(u32 val)
+static inline u32 arch_spin_current(u32 val)
 {
 	return val >> __ARCH_SPIN_CURRENT_SHIFT;
 }
@@ -36,7 +36,7 @@ static inline int arch_spin_current(u32 val)
  * Return the "next" portion of a ticket lock value,
  * i.e. the number that the next task to try to acquire the lock will get.
  */
-static inline int arch_spin_next(u32 val)
+static inline u32 arch_spin_next(u32 val)
 {
 	return val & __ARCH_SPIN_NEXT_MASK;
 }
diff --git a/arch/tile/include/asm/string.h b/arch/tile/include/asm/string.h
index 7535cf1..92b271b 100644
--- a/arch/tile/include/asm/string.h
+++ b/arch/tile/include/asm/string.h
@@ -21,8 +21,10 @@
 #define __HAVE_ARCH_MEMMOVE
 #define __HAVE_ARCH_STRCHR
 #define __HAVE_ARCH_STRLEN
+#define __HAVE_ARCH_STRNLEN
 
 extern __kernel_size_t strlen(const char *);
+extern __kernel_size_t strnlen(const char *, __kernel_size_t);
 extern char *strchr(const char *s, int c);
 extern void *memchr(const void *s, int c, size_t n);
 extern void *memset(void *, int, __kernel_size_t);
diff --git a/arch/tile/include/asm/thread_info.h b/arch/tile/include/asm/thread_info.h
index d1733de..b8aa6df 100644
--- a/arch/tile/include/asm/thread_info.h
+++ b/arch/tile/include/asm/thread_info.h
@@ -39,6 +39,11 @@ struct thread_info {
 	struct restart_block	restart_block;
 	struct single_step_state *step_state;	/* single step state
 						   (if non-zero) */
+	int			align_ctl;	/* controls unaligned access */
+#ifdef __tilegx__
+	unsigned long		unalign_jit_tmp[4]; /* temp r0..r3 storage */
+	void __user		*unalign_jit_base; /* unalign fixup JIT base */
+#endif
 };
 
 /*
@@ -56,6 +61,7 @@ struct thread_info {
 		.fn = do_no_restart_syscall,	\
 	},					\
 	.step_state	= NULL,			\
+	.align_ctl	= 0,			\
 }
 
 #define init_thread_info	(init_thread_union.thread_info)
diff --git a/arch/tile/include/asm/topology.h b/arch/tile/include/asm/topology.h
index d5e86c9..d15c0d8 100644
--- a/arch/tile/include/asm/topology.h
+++ b/arch/tile/include/asm/topology.h
@@ -89,9 +89,6 @@ static inline const struct cpumask *cpumask_of_node(int node)
 #define topology_core_id(cpu)                   (cpu)
 #define topology_core_cpumask(cpu)              ((void)(cpu), cpu_online_mask)
 #define topology_thread_cpumask(cpu)            cpumask_of(cpu)
-
-/* indicates that pointers to the topology struct cpumask maps are valid */
-#define arch_provides_topology_pointers         yes
 #endif
 
 #endif /* _ASM_TILE_TOPOLOGY_H */
diff --git a/arch/tile/include/asm/traps.h b/arch/tile/include/asm/traps.h
index e28c3df4..4b99a1c 100644
--- a/arch/tile/include/asm/traps.h
+++ b/arch/tile/include/asm/traps.h
@@ -15,12 +15,13 @@
 #ifndef _ASM_TILE_TRAPS_H
 #define _ASM_TILE_TRAPS_H
 
+#ifndef __ASSEMBLY__
 #include <arch/chip.h>
 
 /* mm/fault.c */
 void do_page_fault(struct pt_regs *, int fault_num,
 		   unsigned long address, unsigned long write);
-#if CHIP_HAS_TILE_DMA() || CHIP_HAS_SN_PROC()
+#if CHIP_HAS_TILE_DMA()
 void do_async_page_fault(struct pt_regs *);
 #endif
 
@@ -69,6 +70,16 @@ void gx_singlestep_handle(struct pt_regs *, int fault_num);
 
 /* kernel/intvec_64.S */
 void fill_ra_stack(void);
+
+/* Handle unalign data fixup. */
+extern void do_unaligned(struct pt_regs *regs, int vecnum);
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __tilegx__
+/* 128 byte JIT per unalign fixup. */
+#define UNALIGN_JIT_SHIFT    7
 #endif
 
 #endif /* _ASM_TILE_TRAPS_H */
diff --git a/arch/tile/include/asm/uaccess.h b/arch/tile/include/asm/uaccess.h
index e4d44bd..b6cde32 100644
--- a/arch/tile/include/asm/uaccess.h
+++ b/arch/tile/include/asm/uaccess.h
@@ -127,8 +127,10 @@ extern int fixup_exception(struct pt_regs *regs);
 
 #ifdef __LP64__
 #define _ASM_PTR	".quad"
+#define _ASM_ALIGN	".align 8"
 #else
 #define _ASM_PTR	".long"
+#define _ASM_ALIGN	".align 4"
 #endif
 
 #define __get_user_asm(OP, x, ptr, ret)					\
@@ -137,6 +139,7 @@ extern int fixup_exception(struct pt_regs *regs);
 		     "0: { movei %1, 0; movei %0, %3 }\n"		\
 		     "j 9f\n"						\
 		     ".section __ex_table,\"a\"\n"			\
+		     _ASM_ALIGN "\n"					\
 		     _ASM_PTR " 1b, 0b\n"				\
 		     ".popsection\n"					\
 		     "9:"						\
@@ -168,6 +171,7 @@ extern int fixup_exception(struct pt_regs *regs);
 			     "0: { movei %1, 0; movei %2, 0 }\n"	\
 			     "{ movei %0, %4; j 9f }\n"			\
 			     ".section __ex_table,\"a\"\n"		\
+			     ".align 4\n"				\
 			     ".word 1b, 0b\n"				\
 			     ".word 2b, 0b\n"				\
 			     ".popsection\n"				\
@@ -224,6 +228,7 @@ extern int __get_user_bad(void)
 		     ".pushsection .fixup,\"ax\"\n"			\
 		     "0: { movei %0, %3; j 9f }\n"			\
 		     ".section __ex_table,\"a\"\n"			\
+		     _ASM_ALIGN "\n"					\
 		     _ASM_PTR " 1b, 0b\n"				\
 		     ".popsection\n"					\
 		     "9:"						\
@@ -248,6 +253,7 @@ extern int __get_user_bad(void)
 			     ".pushsection .fixup,\"ax\"\n"		\
 			     "0: { movei %0, %4; j 9f }\n"		\
 			     ".section __ex_table,\"a\"\n"		\
+			     ".align 4\n"				\
 			     ".word 1b, 0b\n"				\
 			     ".word 2b, 0b\n"				\
 			     ".popsection\n"				\
@@ -567,37 +573,6 @@ static inline unsigned long __must_check flush_user(
 }
 
 /**
- * inv_user: - Invalidate a block of memory in user space from cache.
- * @mem:   Destination address, in user space.
- * @len:   Number of bytes to invalidate.
- *
- * Returns number of bytes that could not be invalidated.
- * On success, this will be zero.
- *
- * Note that on Tile64, the "inv" operation is in fact a
- * "flush and invalidate", so cache write-backs will occur prior
- * to the cache being marked invalid.
- */
-extern unsigned long inv_user_asm(void __user *mem, unsigned long len);
-static inline unsigned long __must_check __inv_user(
-	void __user *mem, unsigned long len)
-{
-	int retval;
-
-	might_fault();
-	retval = inv_user_asm(mem, len);
-	mb_incoherent();
-	return retval;
-}
-static inline unsigned long __must_check inv_user(
-	void __user *mem, unsigned long len)
-{
-	if (access_ok(VERIFY_WRITE, mem, len))
-		return __inv_user(mem, len);
-	return len;
-}
-
-/**
  * finv_user: - Flush-inval a block of memory in user space from cache.
  * @mem:   Destination address, in user space.
  * @len:   Number of bytes to invalidate.
diff --git a/arch/tile/include/asm/unaligned.h b/arch/tile/include/asm/unaligned.h
index 37dfbe5..5a58a0d 100644
--- a/arch/tile/include/asm/unaligned.h
+++ b/arch/tile/include/asm/unaligned.h
@@ -15,11 +15,15 @@
 #ifndef _ASM_TILE_UNALIGNED_H
 #define _ASM_TILE_UNALIGNED_H
 
-#include <linux/unaligned/le_struct.h>
-#include <linux/unaligned/be_byteshift.h>
-#include <linux/unaligned/generic.h>
-#define get_unaligned	__get_unaligned_le
-#define put_unaligned	__put_unaligned_le
+/*
+ * We could implement faster get_unaligned_[be/le]64 using the ldna
+ * instruction on tilegx; however, we need to either copy all of the
+ * other generic functions to here (which is pretty ugly) or else
+ * modify both the generic code and other arch code to allow arch
+ * specific unaligned data access functions.  Given these functions
+ * are not often called, we'll stick with the generic version.
+ */
+#include <asm-generic/unaligned.h>
 
 /*
  * Is the kernel doing fixups of unaligned accesses?  If <0, no kernel
diff --git a/arch/tile/include/asm/vdso.h b/arch/tile/include/asm/vdso.h
new file mode 100644
index 0000000..9f6a78d
--- /dev/null
+++ b/arch/tile/include/asm/vdso.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef __TILE_VDSO_H__
+#define __TILE_VDSO_H__
+
+#include <linux/types.h>
+
+/*
+ * Note about the vdso_data structure:
+ *
+ * NEVER USE THEM IN USERSPACE CODE DIRECTLY. The layout of the
+ * structure is supposed to be known only to the function in the vdso
+ * itself and may change without notice.
+ */
+
+struct vdso_data {
+	__u64 tz_update_count;  /* Timezone atomicity ctr             */
+	__u64 tb_update_count;  /* Timebase atomicity ctr             */
+	__u64 xtime_tod_stamp;  /* TOD clock for xtime                */
+	__u64 xtime_clock_sec;  /* Kernel time second                 */
+	__u64 xtime_clock_nsec; /* Kernel time nanosecond             */
+	__u64 wtom_clock_sec;   /* Wall to monotonic clock second     */
+	__u64 wtom_clock_nsec;  /* Wall to monotonic clock nanosecond */
+	__u32 mult;             /* Cycle to nanosecond multiplier     */
+	__u32 shift;            /* Cycle to nanosecond divisor (power of two) */
+	__u32 tz_minuteswest;   /* Minutes west of Greenwich          */
+	__u32 tz_dsttime;       /* Type of dst correction             */
+};
+
+extern struct vdso_data *vdso_data;
+
+/* __vdso_rt_sigreturn is defined with the addresses in the vdso page. */
+extern void __vdso_rt_sigreturn(void);
+
+extern int setup_vdso_pages(void);
+
+#endif /* __TILE_VDSO_H__ */
diff --git a/arch/tile/include/gxio/iorpc_mpipe.h b/arch/tile/include/gxio/iorpc_mpipe.h
index 9d50fce..4cda03d 100644
--- a/arch/tile/include/gxio/iorpc_mpipe.h
+++ b/arch/tile/include/gxio/iorpc_mpipe.h
@@ -44,93 +44,101 @@
 #define GXIO_MPIPE_OP_REGISTER_CLIENT_MEMORY IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1210)
 #define GXIO_MPIPE_OP_LINK_OPEN_AUX    IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1211)
 #define GXIO_MPIPE_OP_LINK_CLOSE_AUX   IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1212)
+#define GXIO_MPIPE_OP_LINK_SET_ATTR_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1213)
 
-#define GXIO_MPIPE_OP_GET_TIMESTAMP_AUX IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x121e)
-#define GXIO_MPIPE_OP_SET_TIMESTAMP_AUX IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x121f)
-#define GXIO_MPIPE_OP_ADJUST_TIMESTAMP_AUX IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1220)
+#define GXIO_MPIPE_OP_GET_TIMESTAMP_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x121e)
+#define GXIO_MPIPE_OP_SET_TIMESTAMP_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x121f)
+#define GXIO_MPIPE_OP_ADJUST_TIMESTAMP_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1220)
+#define GXIO_MPIPE_OP_CONFIG_EDMA_RING_BLKS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1221)
+#define GXIO_MPIPE_OP_ADJUST_TIMESTAMP_FREQ IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1222)
 #define GXIO_MPIPE_OP_ARM_POLLFD       IORPC_OPCODE(IORPC_FORMAT_KERNEL_POLLFD, 0x9000)
 #define GXIO_MPIPE_OP_CLOSE_POLLFD     IORPC_OPCODE(IORPC_FORMAT_KERNEL_POLLFD, 0x9001)
 #define GXIO_MPIPE_OP_GET_MMIO_BASE    IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000)
 #define GXIO_MPIPE_OP_CHECK_MMIO_OFFSET IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001)
 
-int gxio_mpipe_alloc_buffer_stacks(gxio_mpipe_context_t * context,
+int gxio_mpipe_alloc_buffer_stacks(gxio_mpipe_context_t *context,
 				   unsigned int count, unsigned int first,
 				   unsigned int flags);
 
-int gxio_mpipe_init_buffer_stack_aux(gxio_mpipe_context_t * context,
+int gxio_mpipe_init_buffer_stack_aux(gxio_mpipe_context_t *context,
 				     void *mem_va, size_t mem_size,
 				     unsigned int mem_flags, unsigned int stack,
 				     unsigned int buffer_size_enum);
 
 
-int gxio_mpipe_alloc_notif_rings(gxio_mpipe_context_t * context,
+int gxio_mpipe_alloc_notif_rings(gxio_mpipe_context_t *context,
 				 unsigned int count, unsigned int first,
 				 unsigned int flags);
 
-int gxio_mpipe_init_notif_ring_aux(gxio_mpipe_context_t * context, void *mem_va,
+int gxio_mpipe_init_notif_ring_aux(gxio_mpipe_context_t *context, void *mem_va,
 				   size_t mem_size, unsigned int mem_flags,
 				   unsigned int ring);
 
-int gxio_mpipe_request_notif_ring_interrupt(gxio_mpipe_context_t * context,
+int gxio_mpipe_request_notif_ring_interrupt(gxio_mpipe_context_t *context,
 					    int inter_x, int inter_y,
 					    int inter_ipi, int inter_event,
 					    unsigned int ring);
 
-int gxio_mpipe_enable_notif_ring_interrupt(gxio_mpipe_context_t * context,
+int gxio_mpipe_enable_notif_ring_interrupt(gxio_mpipe_context_t *context,
 					   unsigned int ring);
 
-int gxio_mpipe_alloc_notif_groups(gxio_mpipe_context_t * context,
+int gxio_mpipe_alloc_notif_groups(gxio_mpipe_context_t *context,
 				  unsigned int count, unsigned int first,
 				  unsigned int flags);
 
-int gxio_mpipe_init_notif_group(gxio_mpipe_context_t * context,
+int gxio_mpipe_init_notif_group(gxio_mpipe_context_t *context,
 				unsigned int group,
 				gxio_mpipe_notif_group_bits_t bits);
 
-int gxio_mpipe_alloc_buckets(gxio_mpipe_context_t * context, unsigned int count,
+int gxio_mpipe_alloc_buckets(gxio_mpipe_context_t *context, unsigned int count,
 			     unsigned int first, unsigned int flags);
 
-int gxio_mpipe_init_bucket(gxio_mpipe_context_t * context, unsigned int bucket,
+int gxio_mpipe_init_bucket(gxio_mpipe_context_t *context, unsigned int bucket,
 			   MPIPE_LBL_INIT_DAT_BSTS_TBL_t bucket_info);
 
-int gxio_mpipe_alloc_edma_rings(gxio_mpipe_context_t * context,
+int gxio_mpipe_alloc_edma_rings(gxio_mpipe_context_t *context,
 				unsigned int count, unsigned int first,
 				unsigned int flags);
 
-int gxio_mpipe_init_edma_ring_aux(gxio_mpipe_context_t * context, void *mem_va,
+int gxio_mpipe_init_edma_ring_aux(gxio_mpipe_context_t *context, void *mem_va,
 				  size_t mem_size, unsigned int mem_flags,
 				  unsigned int ring, unsigned int channel);
 
 
-int gxio_mpipe_commit_rules(gxio_mpipe_context_t * context, const void *blob,
+int gxio_mpipe_commit_rules(gxio_mpipe_context_t *context, const void *blob,
 			    size_t blob_size);
 
-int gxio_mpipe_register_client_memory(gxio_mpipe_context_t * context,
+int gxio_mpipe_register_client_memory(gxio_mpipe_context_t *context,
 				      unsigned int iotlb, HV_PTE pte,
 				      unsigned int flags);
 
-int gxio_mpipe_link_open_aux(gxio_mpipe_context_t * context,
+int gxio_mpipe_link_open_aux(gxio_mpipe_context_t *context,
 			     _gxio_mpipe_link_name_t name, unsigned int flags);
 
-int gxio_mpipe_link_close_aux(gxio_mpipe_context_t * context, int mac);
+int gxio_mpipe_link_close_aux(gxio_mpipe_context_t *context, int mac);
 
+int gxio_mpipe_link_set_attr_aux(gxio_mpipe_context_t *context, int mac,
+				 uint32_t attr, int64_t val);
 
-int gxio_mpipe_get_timestamp_aux(gxio_mpipe_context_t * context, uint64_t * sec,
-				 uint64_t * nsec, uint64_t * cycles);
+int gxio_mpipe_get_timestamp_aux(gxio_mpipe_context_t *context, uint64_t *sec,
+				 uint64_t *nsec, uint64_t *cycles);
 
-int gxio_mpipe_set_timestamp_aux(gxio_mpipe_context_t * context, uint64_t sec,
+int gxio_mpipe_set_timestamp_aux(gxio_mpipe_context_t *context, uint64_t sec,
 				 uint64_t nsec, uint64_t cycles);
 
-int gxio_mpipe_adjust_timestamp_aux(gxio_mpipe_context_t * context,
+int gxio_mpipe_adjust_timestamp_aux(gxio_mpipe_context_t *context,
 				    int64_t nsec);
 
-int gxio_mpipe_arm_pollfd(gxio_mpipe_context_t * context, int pollfd_cookie);
+int gxio_mpipe_adjust_timestamp_freq(gxio_mpipe_context_t *context,
+				     int32_t ppb);
 
-int gxio_mpipe_close_pollfd(gxio_mpipe_context_t * context, int pollfd_cookie);
+int gxio_mpipe_arm_pollfd(gxio_mpipe_context_t *context, int pollfd_cookie);
 
-int gxio_mpipe_get_mmio_base(gxio_mpipe_context_t * context, HV_PTE *base);
+int gxio_mpipe_close_pollfd(gxio_mpipe_context_t *context, int pollfd_cookie);
 
-int gxio_mpipe_check_mmio_offset(gxio_mpipe_context_t * context,
+int gxio_mpipe_get_mmio_base(gxio_mpipe_context_t *context, HV_PTE *base);
+
+int gxio_mpipe_check_mmio_offset(gxio_mpipe_context_t *context,
 				 unsigned long offset, unsigned long size);
 
 #endif /* !__GXIO_MPIPE_LINUX_RPC_H__ */
diff --git a/arch/tile/include/gxio/iorpc_mpipe_info.h b/arch/tile/include/gxio/iorpc_mpipe_info.h
index 0bcf3f7..f0b0428 100644
--- a/arch/tile/include/gxio/iorpc_mpipe_info.h
+++ b/arch/tile/include/gxio/iorpc_mpipe_info.h
@@ -27,20 +27,24 @@
 #include <asm/pgtable.h>
 
 
+#define GXIO_MPIPE_INFO_OP_INSTANCE_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1250)
 #define GXIO_MPIPE_INFO_OP_ENUMERATE_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1251)
 #define GXIO_MPIPE_INFO_OP_GET_MMIO_BASE IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000)
 #define GXIO_MPIPE_INFO_OP_CHECK_MMIO_OFFSET IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001)
 
 
-int gxio_mpipe_info_enumerate_aux(gxio_mpipe_info_context_t * context,
+int gxio_mpipe_info_instance_aux(gxio_mpipe_info_context_t *context,
+				 _gxio_mpipe_link_name_t name);
+
+int gxio_mpipe_info_enumerate_aux(gxio_mpipe_info_context_t *context,
 				  unsigned int idx,
-				  _gxio_mpipe_link_name_t * name,
-				  _gxio_mpipe_link_mac_t * mac);
+				  _gxio_mpipe_link_name_t *name,
+				  _gxio_mpipe_link_mac_t *mac);
 
-int gxio_mpipe_info_get_mmio_base(gxio_mpipe_info_context_t * context,
+int gxio_mpipe_info_get_mmio_base(gxio_mpipe_info_context_t *context,
 				  HV_PTE *base);
 
-int gxio_mpipe_info_check_mmio_offset(gxio_mpipe_info_context_t * context,
+int gxio_mpipe_info_check_mmio_offset(gxio_mpipe_info_context_t *context,
 				      unsigned long offset, unsigned long size);
 
 #endif /* !__GXIO_MPIPE_INFO_LINUX_RPC_H__ */
diff --git a/arch/tile/include/gxio/iorpc_trio.h b/arch/tile/include/gxio/iorpc_trio.h
index 58105c3..376a4f7 100644
--- a/arch/tile/include/gxio/iorpc_trio.h
+++ b/arch/tile/include/gxio/iorpc_trio.h
@@ -30,6 +30,7 @@
 
 #define GXIO_TRIO_OP_ALLOC_MEMORY_MAPS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1404)
 
+#define GXIO_TRIO_OP_ALLOC_SCATTER_QUEUES IORPC_OPCODE(IORPC_FORMAT_NONE, 0x140e)
 #define GXIO_TRIO_OP_ALLOC_PIO_REGIONS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1412)
 
 #define GXIO_TRIO_OP_INIT_PIO_REGION_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1414)
@@ -45,55 +46,59 @@
 #define GXIO_TRIO_OP_GET_MMIO_BASE     IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000)
 #define GXIO_TRIO_OP_CHECK_MMIO_OFFSET IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001)
 
-int gxio_trio_alloc_asids(gxio_trio_context_t * context, unsigned int count,
+int gxio_trio_alloc_asids(gxio_trio_context_t *context, unsigned int count,
 			  unsigned int first, unsigned int flags);
 
 
-int gxio_trio_alloc_memory_maps(gxio_trio_context_t * context,
+int gxio_trio_alloc_memory_maps(gxio_trio_context_t *context,
 				unsigned int count, unsigned int first,
 				unsigned int flags);
 
 
-int gxio_trio_alloc_pio_regions(gxio_trio_context_t * context,
+int gxio_trio_alloc_scatter_queues(gxio_trio_context_t *context,
+				   unsigned int count, unsigned int first,
+				   unsigned int flags);
+
+int gxio_trio_alloc_pio_regions(gxio_trio_context_t *context,
 				unsigned int count, unsigned int first,
 				unsigned int flags);
 
-int gxio_trio_init_pio_region_aux(gxio_trio_context_t * context,
+int gxio_trio_init_pio_region_aux(gxio_trio_context_t *context,
 				  unsigned int pio_region, unsigned int mac,
 				  uint32_t bus_address_hi, unsigned int flags);
 
 
-int gxio_trio_init_memory_map_mmu_aux(gxio_trio_context_t * context,
+int gxio_trio_init_memory_map_mmu_aux(gxio_trio_context_t *context,
 				      unsigned int map, unsigned long va,
 				      uint64_t size, unsigned int asid,
 				      unsigned int mac, uint64_t bus_address,
 				      unsigned int node,
 				      unsigned int order_mode);
 
-int gxio_trio_get_port_property(gxio_trio_context_t * context,
+int gxio_trio_get_port_property(gxio_trio_context_t *context,
 				struct pcie_trio_ports_property *trio_ports);
 
-int gxio_trio_config_legacy_intr(gxio_trio_context_t * context, int inter_x,
+int gxio_trio_config_legacy_intr(gxio_trio_context_t *context, int inter_x,
 				 int inter_y, int inter_ipi, int inter_event,
 				 unsigned int mac, unsigned int intx);
 
-int gxio_trio_config_msi_intr(gxio_trio_context_t * context, int inter_x,
+int gxio_trio_config_msi_intr(gxio_trio_context_t *context, int inter_x,
 			      int inter_y, int inter_ipi, int inter_event,
 			      unsigned int mac, unsigned int mem_map,
 			      uint64_t mem_map_base, uint64_t mem_map_limit,
 			      unsigned int asid);
 
 
-int gxio_trio_set_mps_mrs(gxio_trio_context_t * context, uint16_t mps,
+int gxio_trio_set_mps_mrs(gxio_trio_context_t *context, uint16_t mps,
 			  uint16_t mrs, unsigned int mac);
 
-int gxio_trio_force_rc_link_up(gxio_trio_context_t * context, unsigned int mac);
+int gxio_trio_force_rc_link_up(gxio_trio_context_t *context, unsigned int mac);
 
-int gxio_trio_force_ep_link_up(gxio_trio_context_t * context, unsigned int mac);
+int gxio_trio_force_ep_link_up(gxio_trio_context_t *context, unsigned int mac);
 
-int gxio_trio_get_mmio_base(gxio_trio_context_t * context, HV_PTE *base);
+int gxio_trio_get_mmio_base(gxio_trio_context_t *context, HV_PTE *base);
 
-int gxio_trio_check_mmio_offset(gxio_trio_context_t * context,
+int gxio_trio_check_mmio_offset(gxio_trio_context_t *context,
 				unsigned long offset, unsigned long size);
 
 #endif /* !__GXIO_TRIO_LINUX_RPC_H__ */
diff --git a/arch/tile/include/gxio/iorpc_uart.h b/arch/tile/include/gxio/iorpc_uart.h
new file mode 100644
index 0000000..55429d4
--- /dev/null
+++ b/arch/tile/include/gxio/iorpc_uart.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright 2013 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/* This file is machine-generated; DO NOT EDIT! */
+#ifndef __GXIO_UART_LINUX_RPC_H__
+#define __GXIO_UART_LINUX_RPC_H__
+
+#include <hv/iorpc.h>
+
+#include <hv/drv_uart_intf.h>
+#include <gxio/uart.h>
+#include <gxio/kiorpc.h>
+#include <linux/string.h>
+#include <linux/module.h>
+#include <asm/pgtable.h>
+
+#define GXIO_UART_OP_CFG_INTERRUPT     IORPC_OPCODE(IORPC_FORMAT_KERNEL_INTERRUPT, 0x1900)
+#define GXIO_UART_OP_GET_MMIO_BASE     IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000)
+#define GXIO_UART_OP_CHECK_MMIO_OFFSET IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001)
+
+int gxio_uart_cfg_interrupt(gxio_uart_context_t *context, int inter_x,
+			    int inter_y, int inter_ipi, int inter_event);
+
+int gxio_uart_get_mmio_base(gxio_uart_context_t *context, HV_PTE *base);
+
+int gxio_uart_check_mmio_offset(gxio_uart_context_t *context,
+				unsigned long offset, unsigned long size);
+
+#endif /* !__GXIO_UART_LINUX_RPC_H__ */
diff --git a/arch/tile/include/gxio/iorpc_usb_host.h b/arch/tile/include/gxio/iorpc_usb_host.h
index 8622e7d..79962a9 100644
--- a/arch/tile/include/gxio/iorpc_usb_host.h
+++ b/arch/tile/include/gxio/iorpc_usb_host.h
@@ -31,16 +31,16 @@
 #define GXIO_USB_HOST_OP_GET_MMIO_BASE IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000)
 #define GXIO_USB_HOST_OP_CHECK_MMIO_OFFSET IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001)
 
-int gxio_usb_host_cfg_interrupt(gxio_usb_host_context_t * context, int inter_x,
+int gxio_usb_host_cfg_interrupt(gxio_usb_host_context_t *context, int inter_x,
 				int inter_y, int inter_ipi, int inter_event);
 
-int gxio_usb_host_register_client_memory(gxio_usb_host_context_t * context,
+int gxio_usb_host_register_client_memory(gxio_usb_host_context_t *context,
 					 HV_PTE pte, unsigned int flags);
 
-int gxio_usb_host_get_mmio_base(gxio_usb_host_context_t * context,
+int gxio_usb_host_get_mmio_base(gxio_usb_host_context_t *context,
 				HV_PTE *base);
 
-int gxio_usb_host_check_mmio_offset(gxio_usb_host_context_t * context,
+int gxio_usb_host_check_mmio_offset(gxio_usb_host_context_t *context,
 				    unsigned long offset, unsigned long size);
 
 #endif /* !__GXIO_USB_HOST_LINUX_RPC_H__ */
diff --git a/arch/tile/include/gxio/mpipe.h b/arch/tile/include/gxio/mpipe.h
index b74f470..e37cf4f 100644
--- a/arch/tile/include/gxio/mpipe.h
+++ b/arch/tile/include/gxio/mpipe.h
@@ -220,6 +220,13 @@ typedef MPIPE_PDESC_t gxio_mpipe_idesc_t;
  */
 typedef MPIPE_EDMA_DESC_t gxio_mpipe_edesc_t;
 
+/*
+ * Max # of mpipe instances. 2 currently.
+ */
+#define GXIO_MPIPE_INSTANCE_MAX  HV_MPIPE_INSTANCE_MAX
+
+#define NR_MPIPE_MAX   GXIO_MPIPE_INSTANCE_MAX
+
 /* Get the "va" field from an "idesc".
  *
  * This is the address at which the ingress hardware copied the first
@@ -311,6 +318,9 @@ typedef struct {
 	/* File descriptor for calling up to Linux (and thus the HV). */
 	int fd;
 
+	/* Corresponding mpipe instance #. */
+	int instance;
+
 	/* The VA at which configuration registers are mapped. */
 	char *mmio_cfg_base;
 
@@ -810,7 +820,7 @@ extern int gxio_mpipe_alloc_edma_rings(gxio_mpipe_context_t *context,
 /* Initialize an eDMA ring, using the given memory and size.
  *
  * @param context An initialized mPIPE context.
- * @param ring The eDMA ring index.
+ * @param ering The eDMA ring index.
  * @param channel The channel to use.  This must be one of the channels
  * associated with the context's set of open links.
  * @param mem A physically contiguous region of memory to be filled
@@ -823,10 +833,37 @@ extern int gxio_mpipe_alloc_edma_rings(gxio_mpipe_context_t *context,
  * ::GXIO_ERR_INVAL_MEMORY_SIZE on failure.
  */
 extern int gxio_mpipe_init_edma_ring(gxio_mpipe_context_t *context,
-				     unsigned int ring, unsigned int channel,
+				     unsigned int ering, unsigned int channel,
 				     void *mem, size_t mem_size,
 				     unsigned int mem_flags);
 
+/* Set the "max_blks", "min_snf_blks", and "db" fields of
+ * ::MPIPE_EDMA_RG_INIT_DAT_THRESH_t for a given edma ring.
+ *
+ * The global pool of dynamic blocks will be automatically adjusted.
+ *
+ * This function should not be called after any egress has been done
+ * on the edma ring.
+ *
+ * Most applications should just use gxio_mpipe_equeue_set_snf_size().
+ *
+ * @param context An initialized mPIPE context.
+ * @param ering The eDMA ring index.
+ * @param max_blks The number of blocks to dedicate to the ring
+ * (normally min_snf_blks + 1).  Must be greater than min_snf_blocks.
+ * @param min_snf_blks The number of blocks which must be stored
+ * prior to starting to send the packet (normally 12).
+ * @param db Whether to allow use of dynamic blocks by the ring
+ * (normally 1).
+ *
+ * @return 0 on success, negative on error.
+ */
+extern int gxio_mpipe_config_edma_ring_blks(gxio_mpipe_context_t *context,
+					    unsigned int ering,
+					    unsigned int max_blks,
+					    unsigned int min_snf_blks,
+					    unsigned int db);
+
 /*****************************************************************
  *                      Classifier Program                        *
  ******************************************************************/
@@ -1288,15 +1325,39 @@ typedef struct {
 	/* The log2() of the number of entries. */
 	unsigned long log2_num_entries;
 
+	/* The context. */
+	gxio_mpipe_context_t *context;
+
+	/* The ering. */
+	unsigned int ering;
+
+	/* The channel. */
+	unsigned int channel;
+
 } gxio_mpipe_equeue_t;
 
 /* Initialize an "equeue".
  *
- * Takes the equeue plus the same args as gxio_mpipe_init_edma_ring().
+ * This function uses gxio_mpipe_init_edma_ring() to initialize the
+ * underlying edma_ring using the provided arguments.
+ *
+ * @param equeue An egress queue to be initialized.
+ * @param context An initialized mPIPE context.
+ * @param ering The eDMA ring index.
+ * @param channel The channel to use.  This must be one of the channels
+ * associated with the context's set of open links.
+ * @param mem A physically contiguous region of memory to be filled
+ * with a ring of ::gxio_mpipe_edesc_t structures.
+ * @param mem_size Number of bytes in the ring.  Must be 512, 2048,
+ * 8192 or 65536, times 16 (i.e. sizeof(gxio_mpipe_edesc_t)).
+ * @param mem_flags ::gxio_mpipe_mem_flags_e memory flags.
+ *
+ * @return 0 on success, ::GXIO_MPIPE_ERR_BAD_EDMA_RING or
+ * ::GXIO_ERR_INVAL_MEMORY_SIZE on failure.
  */
 extern int gxio_mpipe_equeue_init(gxio_mpipe_equeue_t *equeue,
 				  gxio_mpipe_context_t *context,
-				  unsigned int edma_ring_id,
+				  unsigned int ering,
 				  unsigned int channel,
 				  void *mem, unsigned int mem_size,
 				  unsigned int mem_flags);
@@ -1494,6 +1555,37 @@ static inline int gxio_mpipe_equeue_is_complete(gxio_mpipe_equeue_t *equeue,
 					    completion_slot, update);
 }
 
+/* Set the snf (store and forward) size for an equeue.
+ *
+ * The snf size for an equeue defaults to 1536, and encodes the size
+ * of the largest packet for which egress is guaranteed to avoid
+ * transmission underruns and/or corrupt checksums under heavy load.
+ *
+ * The snf size affects a global resource pool which cannot support,
+ * for example, all 24 equeues each requesting an snf size of 8K.
+ *
+ * To ensure that jumbo packets can be egressed properly, the snf size
+ * should be set to the size of the largest possible packet, which
+ * will usually be limited by the size of the app's largest buffer.
+ *
+ * This is a convenience wrapper around
+ * gxio_mpipe_config_edma_ring_blks().
+ *
+ * This function should not be called after any egress has been done
+ * on the equeue.
+ *
+ * @param equeue An egress queue initialized via gxio_mpipe_equeue_init().
+ * @param size The snf size, in bytes.
+ * @return Zero on success, negative error otherwise.
+ */
+static inline int gxio_mpipe_equeue_set_snf_size(gxio_mpipe_equeue_t *equeue,
+						 size_t size)
+{
+	int blks = (size + 127) / 128;
+	return gxio_mpipe_config_edma_ring_blks(equeue->context, equeue->ering,
+						blks + 1, blks, 1);
+}
+
 /*****************************************************************
  *                        Link Management                         *
  ******************************************************************/
@@ -1634,6 +1726,24 @@ typedef struct {
 	uint8_t mac;
 } gxio_mpipe_link_t;
 
+/* Translate a link name to the instance number of the mPIPE shim which is
+ *  connected to that link.  This call does not verify whether the link is
+ *  currently available, and does not reserve any link resources;
+ *  gxio_mpipe_link_open() must be called to perform those functions.
+ *
+ *  Typically applications will call this function to translate a link name
+ *  to an mPIPE instance number; call gxio_mpipe_init(), passing it that
+ *  instance number, to initialize the mPIPE shim; and then call
+ *  gxio_mpipe_link_open(), passing it the same link name plus the mPIPE
+ *  context, to configure the link.
+ *
+ * @param link_name Name of the link; see @ref gxio_mpipe_link_names.
+ * @return The mPIPE instance number which is associated with the named
+ *  link, or a negative error code (::GXIO_ERR_NO_DEVICE) if the link does
+ *  not exist.
+ */
+extern int gxio_mpipe_link_instance(const char *link_name);
+
 /* Retrieve one of this system's legal link names, and its MAC address.
  *
  * @param index Link name index.  If a system supports N legal link names,
@@ -1697,6 +1807,17 @@ static inline int gxio_mpipe_link_channel(gxio_mpipe_link_t *link)
 	return link->channel;
 }
 
+/* Set a link attribute.
+ *
+ * @param link A properly initialized link state object.
+ * @param attr An attribute from the set of @ref gxio_mpipe_link_attrs.
+ * @param val New value of the attribute.
+ * @return 0 if the attribute was successfully set, or a negative error
+ *  code.
+ */
+extern int gxio_mpipe_link_set_attr(gxio_mpipe_link_t *link, uint32_t attr,
+				    int64_t val);
+
 ///////////////////////////////////////////////////////////////////
 //                             Timestamp                         //
 ///////////////////////////////////////////////////////////////////
@@ -1733,4 +1854,18 @@ extern int gxio_mpipe_set_timestamp(gxio_mpipe_context_t *context,
 extern int gxio_mpipe_adjust_timestamp(gxio_mpipe_context_t *context,
 				       int64_t delta);
 
+/** Adjust the mPIPE timestamp clock frequency.
+ *
+ * @param context An initialized mPIPE context.
+ * @param ppb A 32-bit signed PPB (Parts Per Billion) value to adjust.
+ * The absolute value of ppb must be less than or equal to 1000000000.
+ * Values less than about 30000 will generally cause a GXIO_ERR_INVAL
+ * return due to the granularity of the hardware that converts reference
+ * clock cycles into seconds and nanoseconds.
+ * @return If the call was successful, zero; otherwise, a negative error
+ *  code.
+ */
+extern int gxio_mpipe_adjust_timestamp_freq(gxio_mpipe_context_t* context,
+                                            int32_t ppb);
+
 #endif /* !_GXIO_MPIPE_H_ */
diff --git a/arch/tile/include/gxio/uart.h b/arch/tile/include/gxio/uart.h
new file mode 100644
index 0000000..438ee7e
--- /dev/null
+++ b/arch/tile/include/gxio/uart.h
@@ -0,0 +1,105 @@
+/*
+ * Copyright 2013 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _GXIO_UART_H_
+#define _GXIO_UART_H_
+
+#include "common.h"
+
+#include <hv/drv_uart_intf.h>
+#include <hv/iorpc.h>
+
+/*
+ *
+ * An API for manipulating UART interface.
+ */
+
+/*
+ *
+ * The Rshim allows access to the processor's UART interface.
+ */
+
+/* A context object used to manage UART resources. */
+typedef struct {
+
+	/* File descriptor for calling up to the hypervisor. */
+	int fd;
+
+	/* The VA at which our MMIO registers are mapped. */
+	char *mmio_base;
+
+} gxio_uart_context_t;
+
+/* Request UART interrupts.
+ *
+ *  Request that interrupts be delivered to a tile when the UART's
+ *  Receive FIFO is written, or the Write FIFO is read.
+ *
+ * @param context Pointer to a properly initialized gxio_uart_context_t.
+ * @param bind_cpu_x X coordinate of CPU to which interrupt will be delivered.
+ * @param bind_cpu_y Y coordinate of CPU to which interrupt will be delivered.
+ * @param bind_interrupt IPI interrupt number.
+ * @param bind_event Sub-interrupt event bit number; a negative value can
+ *  disable the interrupt.
+ * @return Zero if all of the requested UART events were successfully
+ *  configured to interrupt.
+ */
+extern int gxio_uart_cfg_interrupt(gxio_uart_context_t *context,
+				   int bind_cpu_x,
+				   int bind_cpu_y,
+				   int bind_interrupt, int bind_event);
+
+/* Initialize a UART context.
+ *
+ *  A properly initialized context must be obtained before any of the other
+ *  gxio_uart routines may be used.
+ *
+ * @param context Pointer to a gxio_uart_context_t, which will be initialized
+ *  by this routine, if it succeeds.
+ * @param uart_index Index of the UART to use.
+ * @return Zero if the context was successfully initialized, else a
+ *  GXIO_ERR_xxx error code.
+ */
+extern int gxio_uart_init(gxio_uart_context_t *context, int uart_index);
+
+/* Destroy a UART context.
+ *
+ *  Once destroyed, a context may not be used with any gxio_uart routines
+ *  other than gxio_uart_init().  After this routine returns, no further
+ *  interrupts requested on this context will be delivered.  The state and
+ *  configuration of the pins which had been attached to this context are
+ *  unchanged by this operation.
+ *
+ * @param context Pointer to a gxio_uart_context_t.
+ * @return Zero if the context was successfully destroyed, else a
+ *  GXIO_ERR_xxx error code.
+ */
+extern int gxio_uart_destroy(gxio_uart_context_t *context);
+
+/* Write UART register.
+ * @param context Pointer to a gxio_uart_context_t.
+ * @param offset UART register offset.
+ * @param word Data will be wrote to UART reigister.
+ */
+extern void gxio_uart_write(gxio_uart_context_t *context, uint64_t offset,
+			    uint64_t word);
+
+/* Read UART register.
+ * @param context Pointer to a gxio_uart_context_t.
+ * @param offset UART register offset.
+ * @return Data read from UART register.
+ */
+extern uint64_t gxio_uart_read(gxio_uart_context_t *context, uint64_t offset);
+
+#endif /* _GXIO_UART_H_ */
diff --git a/arch/tile/include/gxio/usb_host.h b/arch/tile/include/gxio/usb_host.h
index 5eedec0..93c9636 100644
--- a/arch/tile/include/gxio/usb_host.h
+++ b/arch/tile/include/gxio/usb_host.h
@@ -53,7 +53,7 @@ typedef struct {
  * @return Zero if the context was successfully initialized, else a
  *  GXIO_ERR_xxx error code.
  */
-extern int gxio_usb_host_init(gxio_usb_host_context_t * context, int usb_index,
+extern int gxio_usb_host_init(gxio_usb_host_context_t *context, int usb_index,
 			      int is_ehci);
 
 /* Destroy a USB context.
@@ -68,20 +68,20 @@ extern int gxio_usb_host_init(gxio_usb_host_context_t * context, int usb_index,
  * @return Zero if the context was successfully destroyed, else a
  *  GXIO_ERR_xxx error code.
  */
-extern int gxio_usb_host_destroy(gxio_usb_host_context_t * context);
+extern int gxio_usb_host_destroy(gxio_usb_host_context_t *context);
 
 /* Retrieve the address of the shim's MMIO registers.
  *
  * @param context Pointer to a properly initialized gxio_usb_host_context_t.
  * @return The address of the shim's MMIO registers.
  */
-extern void *gxio_usb_host_get_reg_start(gxio_usb_host_context_t * context);
+extern void *gxio_usb_host_get_reg_start(gxio_usb_host_context_t *context);
 
 /* Retrieve the length of the shim's MMIO registers.
  *
  * @param context Pointer to a properly initialized gxio_usb_host_context_t.
  * @return The length of the shim's MMIO registers.
  */
-extern size_t gxio_usb_host_get_reg_len(gxio_usb_host_context_t * context);
+extern size_t gxio_usb_host_get_reg_len(gxio_usb_host_context_t *context);
 
 #endif /* _GXIO_USB_H_ */
diff --git a/arch/tile/include/hv/drv_mpipe_intf.h b/arch/tile/include/hv/drv_mpipe_intf.h
index 6cdae3b..c97e416 100644
--- a/arch/tile/include/hv/drv_mpipe_intf.h
+++ b/arch/tile/include/hv/drv_mpipe_intf.h
@@ -23,6 +23,9 @@
 #include <arch/mpipe_constants.h>
 
 
+/** Number of mPIPE instances supported */
+#define HV_MPIPE_INSTANCE_MAX   (2)
+
 /** Number of buffer stacks (32). */
 #define HV_MPIPE_NUM_BUFFER_STACKS \
   (MPIPE_MMIO_INIT_DAT_GX36_1__BUFFER_STACK_MASK_WIDTH)
diff --git a/arch/tile/include/hv/drv_trio_intf.h b/arch/tile/include/hv/drv_trio_intf.h
index ef9f3f5..237e04d 100644
--- a/arch/tile/include/hv/drv_trio_intf.h
+++ b/arch/tile/include/hv/drv_trio_intf.h
@@ -64,8 +64,9 @@ struct pcie_port_property
    *  will not consider it an error if the link comes up as a x8 link. */
   uint8_t allow_x8: 1;
 
-  /** Reserved. */
-  uint8_t reserved: 1;
+  /** If true, this link is connected to a device which may or may not
+   *  be present. */
+  uint8_t removable: 1;
 
 };
 
@@ -167,6 +168,9 @@ pcie_stream_intr_config_sel_t;
 struct pcie_trio_ports_property
 {
   struct pcie_port_property ports[TILEGX_TRIO_PCIES];
+
+  /** Set if this TRIO belongs to a Gx72 device. */
+  uint8_t is_gx72;
 };
 
 /* Flags indicating traffic class. */
diff --git a/arch/tile/include/hv/drv_uart_intf.h b/arch/tile/include/hv/drv_uart_intf.h
new file mode 100644
index 0000000..f5379e2
--- /dev/null
+++ b/arch/tile/include/hv/drv_uart_intf.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2013 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/**
+ * Interface definitions for the UART driver.
+ */
+
+#ifndef _SYS_HV_DRV_UART_INTF_H
+#define _SYS_HV_DRV_UART_INTF_H
+
+#include <arch/uart.h>
+
+/** Number of UART ports supported. */
+#define TILEGX_UART_NR        2
+
+/** The mmap file offset (PA) of the UART MMIO region. */
+#define HV_UART_MMIO_OFFSET   0
+
+/** The maximum size of the UARTs MMIO region (64K Bytes). */
+#define HV_UART_MMIO_SIZE     (1UL << 16)
+
+#endif /* _SYS_HV_DRV_UART_INTF_H */
diff --git a/arch/tile/include/hv/hypervisor.h b/arch/tile/include/hv/hypervisor.h
index 837dca5..dfcdeb6 100644
--- a/arch/tile/include/hv/hypervisor.h
+++ b/arch/tile/include/hv/hypervisor.h
@@ -318,8 +318,11 @@
 /** hv_set_pte_super_shift */
 #define HV_DISPATCH_SET_PTE_SUPER_SHIFT           57
 
+/** hv_console_set_ipi */
+#define HV_DISPATCH_CONSOLE_SET_IPI               63
+
 /** One more than the largest dispatch value */
-#define _HV_DISPATCH_END                          58
+#define _HV_DISPATCH_END                          64
 
 
 #ifndef __ASSEMBLER__
@@ -541,14 +544,24 @@ typedef enum {
   HV_CONFSTR_CPUMOD_REV      = 18,
 
   /** Human-readable CPU module description. */
-  HV_CONFSTR_CPUMOD_DESC     = 19
+  HV_CONFSTR_CPUMOD_DESC     = 19,
+
+  /** Per-tile hypervisor statistics.  When this identifier is specified,
+   *  the hv_confstr call takes two extra arguments.  The first is the
+   *  HV_XY_TO_LOTAR of the target tile's coordinates.  The second is
+   *  a flag word.  The only current flag is the lowest bit, which means
+   *  "zero out the stats instead of retrieving them"; in this case the
+   *  buffer and buffer length are ignored. */
+  HV_CONFSTR_HV_STATS        = 20
 
 } HV_ConfstrQuery;
 
 /** Query a configuration string from the hypervisor.
  *
  * @param query Identifier for the specific string to be retrieved
- *        (HV_CONFSTR_xxx).
+ *        (HV_CONFSTR_xxx).  Some strings may require or permit extra
+ *        arguments to be appended which select specific objects to be
+ *        described; see the string descriptions above.
  * @param buf Buffer in which to place the string.
  * @param len Length of the buffer.
  * @return If query is valid, then the length of the corresponding string,
@@ -556,21 +569,16 @@ typedef enum {
  *        was truncated.  If query is invalid, HV_EINVAL.  If the specified
  *        buffer is not writable by the client, HV_EFAULT.
  */
-int hv_confstr(HV_ConfstrQuery query, HV_VirtAddr buf, int len);
+int hv_confstr(HV_ConfstrQuery query, HV_VirtAddr buf, int len, ...);
 
 /** Tile coordinate */
 typedef struct
 {
-#ifndef __BIG_ENDIAN__
   /** X coordinate, relative to supervisor's top-left coordinate */
   int x;
 
   /** Y coordinate, relative to supervisor's top-left coordinate */
   int y;
-#else
-  int y;
-  int x;
-#endif
 } HV_Coord;
 
 
@@ -585,6 +593,30 @@ typedef struct
  */
 int hv_get_ipi_pte(HV_Coord tile, int pl, HV_PTE* pte);
 
+/** Configure the console interrupt.
+ *
+ * When the console client interrupt is enabled, the hypervisor will
+ * deliver the specified IPI to the client in the following situations:
+ *
+ * - The console has at least one character available for input.
+ *
+ * - The console can accept new characters for output, and the last call
+ *   to hv_console_write() did not write all of the characters requested
+ *   by the client.
+ *
+ * Note that in some system configurations, console interrupt will not
+ * be available; clients should be prepared for this routine to fail and
+ * to fall back to periodic console polling in that case.
+ *
+ * @param ipi Index of the IPI register which will receive the interrupt.
+ * @param event IPI event number for console interrupt. If less than 0,
+ *        disable the console IPI interrupt.
+ * @param coord Tile to be targeted for console interrupt.
+ * @return 0 on success, otherwise, HV_EINVAL if illegal parameter,
+ *         HV_ENOTSUP if console interrupt are not available.
+ */
+int hv_console_set_ipi(int ipi, int event, HV_Coord coord);
+
 #else /* !CHIP_HAS_IPI() */
 
 /** A set of interrupts. */
@@ -1092,13 +1124,8 @@ HV_VirtAddrRange hv_inquire_virtual(int idx);
 /** A range of ASID values. */
 typedef struct
 {
-#ifndef __BIG_ENDIAN__
   HV_ASID start;        /**< First ASID in the range. */
   unsigned int size;    /**< Number of ASIDs. Zero for an invalid range. */
-#else
-  unsigned int size;    /**< Number of ASIDs. Zero for an invalid range. */
-  HV_ASID start;        /**< First ASID in the range. */
-#endif
 } HV_ASIDRange;
 
 /** Returns information about a range of ASIDs.
@@ -1422,7 +1449,6 @@ typedef enum
 /** Message recipient. */
 typedef struct
 {
-#ifndef __BIG_ENDIAN__
   /** X coordinate, relative to supervisor's top-left coordinate */
   unsigned int x:11;
 
@@ -1431,11 +1457,6 @@ typedef struct
 
   /** Status of this recipient */
   HV_Recip_State state:10;
-#else //__BIG_ENDIAN__
-  HV_Recip_State state:10;
-  unsigned int y:11;
-  unsigned int x:11;
-#endif
 } HV_Recipient;
 
 /** Send a message to a set of recipients.
diff --git a/arch/tile/include/uapi/arch/Kbuild b/arch/tile/include/uapi/arch/Kbuild
index 4ebc34f..97dfbec 100644
--- a/arch/tile/include/uapi/arch/Kbuild
+++ b/arch/tile/include/uapi/arch/Kbuild
@@ -1,7 +1,6 @@
 # UAPI Header export list
 header-y += abi.h
 header-y += chip.h
-header-y += chip_tile64.h
 header-y += chip_tilegx.h
 header-y += chip_tilepro.h
 header-y += icache.h
diff --git a/arch/tile/include/uapi/arch/chip.h b/arch/tile/include/uapi/arch/chip.h
index 926d3db..4c91f90 100644
--- a/arch/tile/include/uapi/arch/chip.h
+++ b/arch/tile/include/uapi/arch/chip.h
@@ -12,9 +12,7 @@
  *   more details.
  */
 
-#if __tile_chip__ == 0
-#include <arch/chip_tile64.h>
-#elif __tile_chip__ == 1
+#if __tile_chip__ == 1
 #include <arch/chip_tilepro.h>
 #elif defined(__tilegx__)
 #include <arch/chip_tilegx.h>
diff --git a/arch/tile/include/uapi/arch/chip_tile64.h b/arch/tile/include/uapi/arch/chip_tile64.h
deleted file mode 100644
index 261aaba..0000000
--- a/arch/tile/include/uapi/arch/chip_tile64.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * Copyright 2010 Tilera Corporation. All Rights Reserved.
- *
- *   This program is free software; you can redistribute it and/or
- *   modify it under the terms of the GNU General Public License
- *   as published by the Free Software Foundation, version 2.
- *
- *   This program is distributed in the hope that it will be useful, but
- *   WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- *   NON INFRINGEMENT.  See the GNU General Public License for
- *   more details.
- */
-
-/*
- * @file
- * Global header file.
- * This header file specifies defines for TILE64.
- */
-
-#ifndef __ARCH_CHIP_H__
-#define __ARCH_CHIP_H__
-
-/** Specify chip version.
- * When possible, prefer the CHIP_xxx symbols below for future-proofing.
- * This is intended for cross-compiling; native compilation should
- * use the predefined __tile_chip__ symbol.
- */
-#define TILE_CHIP 0
-
-/** Specify chip revision.
- * This provides for the case of a respin of a particular chip type;
- * the normal value for this symbol is "0".
- * This is intended for cross-compiling; native compilation should
- * use the predefined __tile_chip_rev__ symbol.
- */
-#define TILE_CHIP_REV 0
-
-/** The name of this architecture. */
-#define CHIP_ARCH_NAME "tile64"
-
-/** The ELF e_machine type for binaries for this chip. */
-#define CHIP_ELF_TYPE() EM_TILE64
-
-/** The alternate ELF e_machine type for binaries for this chip. */
-#define CHIP_COMPAT_ELF_TYPE() 0x2506
-
-/** What is the native word size of the machine? */
-#define CHIP_WORD_SIZE() 32
-
-/** How many bits of a virtual address are used. Extra bits must be
- * the sign extension of the low bits.
- */
-#define CHIP_VA_WIDTH() 32
-
-/** How many bits are in a physical address? */
-#define CHIP_PA_WIDTH() 36
-
-/** Size of the L2 cache, in bytes. */
-#define CHIP_L2_CACHE_SIZE() 65536
-
-/** Log size of an L2 cache line in bytes. */
-#define CHIP_L2_LOG_LINE_SIZE() 6
-
-/** Size of an L2 cache line, in bytes. */
-#define CHIP_L2_LINE_SIZE() (1 << CHIP_L2_LOG_LINE_SIZE())
-
-/** Associativity of the L2 cache. */
-#define CHIP_L2_ASSOC() 2
-
-/** Size of the L1 data cache, in bytes. */
-#define CHIP_L1D_CACHE_SIZE() 8192
-
-/** Log size of an L1 data cache line in bytes. */
-#define CHIP_L1D_LOG_LINE_SIZE() 4
-
-/** Size of an L1 data cache line, in bytes. */
-#define CHIP_L1D_LINE_SIZE() (1 << CHIP_L1D_LOG_LINE_SIZE())
-
-/** Associativity of the L1 data cache. */
-#define CHIP_L1D_ASSOC() 2
-
-/** Size of the L1 instruction cache, in bytes. */
-#define CHIP_L1I_CACHE_SIZE() 8192
-
-/** Log size of an L1 instruction cache line in bytes. */
-#define CHIP_L1I_LOG_LINE_SIZE() 6
-
-/** Size of an L1 instruction cache line, in bytes. */
-#define CHIP_L1I_LINE_SIZE() (1 << CHIP_L1I_LOG_LINE_SIZE())
-
-/** Associativity of the L1 instruction cache. */
-#define CHIP_L1I_ASSOC() 1
-
-/** Stride with which flush instructions must be issued. */
-#define CHIP_FLUSH_STRIDE() CHIP_L2_LINE_SIZE()
-
-/** Stride with which inv instructions must be issued. */
-#define CHIP_INV_STRIDE() CHIP_L1D_LINE_SIZE()
-
-/** Stride with which finv instructions must be issued. */
-#define CHIP_FINV_STRIDE() CHIP_L1D_LINE_SIZE()
-
-/** Can the local cache coherently cache data that is homed elsewhere? */
-#define CHIP_HAS_COHERENT_LOCAL_CACHE() 0
-
-/** How many simultaneous outstanding victims can the L2 cache have? */
-#define CHIP_MAX_OUTSTANDING_VICTIMS() 2
-
-/** Does the TLB support the NC and NOALLOC bits? */
-#define CHIP_HAS_NC_AND_NOALLOC_BITS() 0
-
-/** Does the chip support hash-for-home caching? */
-#define CHIP_HAS_CBOX_HOME_MAP() 0
-
-/** Number of entries in the chip's home map tables. */
-/* #define CHIP_CBOX_HOME_MAP_SIZE() -- does not apply to chip 0 */
-
-/** Do uncacheable requests miss in the cache regardless of whether
- * there is matching data? */
-#define CHIP_HAS_ENFORCED_UNCACHEABLE_REQUESTS() 0
-
-/** Does the mf instruction wait for victims? */
-#define CHIP_HAS_MF_WAITS_FOR_VICTIMS() 1
-
-/** Does the chip have an "inv" instruction that doesn't also flush? */
-#define CHIP_HAS_INV() 0
-
-/** Does the chip have a "wh64" instruction? */
-#define CHIP_HAS_WH64() 0
-
-/** Does this chip have a 'dword_align' instruction? */
-#define CHIP_HAS_DWORD_ALIGN() 0
-
-/** Number of performance counters. */
-#define CHIP_PERFORMANCE_COUNTERS() 2
-
-/** Does this chip have auxiliary performance counters? */
-#define CHIP_HAS_AUX_PERF_COUNTERS() 0
-
-/** Is the CBOX_MSR1 SPR supported? */
-#define CHIP_HAS_CBOX_MSR1() 0
-
-/** Is the TILE_RTF_HWM SPR supported? */
-#define CHIP_HAS_TILE_RTF_HWM() 0
-
-/** Is the TILE_WRITE_PENDING SPR supported? */
-#define CHIP_HAS_TILE_WRITE_PENDING() 0
-
-/** Is the PROC_STATUS SPR supported? */
-#define CHIP_HAS_PROC_STATUS_SPR() 0
-
-/** Is the DSTREAM_PF SPR supported? */
-#define CHIP_HAS_DSTREAM_PF() 0
-
-/** Log of the number of mshims we have. */
-#define CHIP_LOG_NUM_MSHIMS() 2
-
-/** Are the bases of the interrupt vector areas fixed? */
-#define CHIP_HAS_FIXED_INTVEC_BASE() 1
-
-/** Are the interrupt masks split up into 2 SPRs? */
-#define CHIP_HAS_SPLIT_INTR_MASK() 1
-
-/** Is the cycle count split up into 2 SPRs? */
-#define CHIP_HAS_SPLIT_CYCLE() 1
-
-/** Does the chip have a static network? */
-#define CHIP_HAS_SN() 1
-
-/** Does the chip have a static network processor? */
-#define CHIP_HAS_SN_PROC() 1
-
-/** Size of the L1 static network processor instruction cache, in bytes. */
-#define CHIP_L1SNI_CACHE_SIZE() 2048
-
-/** Does the chip have DMA support in each tile? */
-#define CHIP_HAS_TILE_DMA() 1
-
-/** Does the chip have the second revision of the directly accessible
- *  dynamic networks?  This encapsulates a number of characteristics,
- *  including the absence of the catch-all, the absence of inline message
- *  tags, the absence of support for network context-switching, and so on.
- */
-#define CHIP_HAS_REV1_XDN() 0
-
-/** Does the chip have cmpexch and similar (fetchadd, exch, etc.)? */
-#define CHIP_HAS_CMPEXCH() 0
-
-/** Does the chip have memory-mapped I/O support? */
-#define CHIP_HAS_MMIO() 0
-
-/** Does the chip have post-completion interrupts? */
-#define CHIP_HAS_POST_COMPLETION_INTERRUPTS() 0
-
-/** Does the chip have native single step support? */
-#define CHIP_HAS_SINGLE_STEP() 0
-
-#ifndef __OPEN_SOURCE__  /* features only relevant to hypervisor-level code */
-
-/** How many entries are present in the instruction TLB? */
-#define CHIP_ITLB_ENTRIES() 8
-
-/** How many entries are present in the data TLB? */
-#define CHIP_DTLB_ENTRIES() 16
-
-/** How many MAF entries does the XAUI shim have? */
-#define CHIP_XAUI_MAF_ENTRIES() 16
-
-/** Does the memory shim have a source-id table? */
-#define CHIP_HAS_MSHIM_SRCID_TABLE() 1
-
-/** Does the L1 instruction cache clear on reset? */
-#define CHIP_HAS_L1I_CLEAR_ON_RESET() 0
-
-/** Does the chip come out of reset with valid coordinates on all tiles?
- * Note that if defined, this also implies that the upper left is 1,1.
- */
-#define CHIP_HAS_VALID_TILE_COORD_RESET() 0
-
-/** Does the chip have unified packet formats? */
-#define CHIP_HAS_UNIFIED_PACKET_FORMATS() 0
-
-/** Does the chip support write reordering? */
-#define CHIP_HAS_WRITE_REORDERING() 0
-
-/** Does the chip support Y-X routing as well as X-Y? */
-#define CHIP_HAS_Y_X_ROUTING() 0
-
-/** Is INTCTRL_3 managed with the correct MPL? */
-#define CHIP_HAS_INTCTRL_3_STATUS_FIX() 0
-
-/** Is it possible to configure the chip to be big-endian? */
-#define CHIP_HAS_BIG_ENDIAN_CONFIG() 0
-
-/** Is the CACHE_RED_WAY_OVERRIDDEN SPR supported? */
-#define CHIP_HAS_CACHE_RED_WAY_OVERRIDDEN() 0
-
-/** Is the DIAG_TRACE_WAY SPR supported? */
-#define CHIP_HAS_DIAG_TRACE_WAY() 0
-
-/** Is the MEM_STRIPE_CONFIG SPR supported? */
-#define CHIP_HAS_MEM_STRIPE_CONFIG() 0
-
-/** Are the TLB_PERF SPRs supported? */
-#define CHIP_HAS_TLB_PERF() 0
-
-/** Is the VDN_SNOOP_SHIM_CTL SPR supported? */
-#define CHIP_HAS_VDN_SNOOP_SHIM_CTL() 0
-
-/** Does the chip support rev1 DMA packets? */
-#define CHIP_HAS_REV1_DMA_PACKETS() 0
-
-/** Does the chip have an IPI shim? */
-#define CHIP_HAS_IPI() 0
-
-#endif /* !__OPEN_SOURCE__ */
-#endif /* __ARCH_CHIP_H__ */
diff --git a/arch/tile/include/uapi/arch/opcode_tilegx.h b/arch/tile/include/uapi/arch/opcode_tilegx.h
index c14d02c..d76ff2d 100644
--- a/arch/tile/include/uapi/arch/opcode_tilegx.h
+++ b/arch/tile/include/uapi/arch/opcode_tilegx.h
@@ -61,6 +61,7 @@ typedef tilegx_bundle_bits tile_bundle_bits;
 #define TILE_BUNDLE_ALIGNMENT_IN_BYTES TILEGX_BUNDLE_ALIGNMENT_IN_BYTES
 #define TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES \
   TILEGX_LOG2_BUNDLE_ALIGNMENT_IN_BYTES
+#define TILE_BPT_BUNDLE TILEGX_BPT_BUNDLE
 
 /* 64-bit pattern for a { bpt ; nop } bundle. */
 #define TILEGX_BPT_BUNDLE 0x286a44ae51485000ULL
diff --git a/arch/tile/include/uapi/arch/opcode_tilepro.h b/arch/tile/include/uapi/arch/opcode_tilepro.h
index 71b763b..4451cff 100644
--- a/arch/tile/include/uapi/arch/opcode_tilepro.h
+++ b/arch/tile/include/uapi/arch/opcode_tilepro.h
@@ -71,6 +71,7 @@ typedef tilepro_bundle_bits tile_bundle_bits;
 #define TILE_BUNDLE_ALIGNMENT_IN_BYTES TILEPRO_BUNDLE_ALIGNMENT_IN_BYTES
 #define TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES \
   TILEPRO_LOG2_BUNDLE_ALIGNMENT_IN_BYTES
+#define TILE_BPT_BUNDLE TILEPRO_BPT_BUNDLE
 
 /* 64-bit pattern for a { bpt ; nop } bundle. */
 #define TILEPRO_BPT_BUNDLE 0x400b3cae70166000ULL
diff --git a/arch/tile/include/uapi/arch/spr_def_32.h b/arch/tile/include/uapi/arch/spr_def_32.h
index c689446..78daa31 100644
--- a/arch/tile/include/uapi/arch/spr_def_32.h
+++ b/arch/tile/include/uapi/arch/spr_def_32.h
@@ -200,8 +200,6 @@
 #define SPR_SIM_CONTROL 0x4e0c
 #define SPR_SNCTL 0x0805
 #define SPR_SNCTL__FRZFABRIC_MASK  0x1
-#define SPR_SNCTL__FRZPROC_MASK  0x2
-#define SPR_SNPC 0x080b
 #define SPR_SNSTATIC 0x080c
 #define SPR_SYSTEM_SAVE_0_0 0x4b00
 #define SPR_SYSTEM_SAVE_0_1 0x4b01
diff --git a/arch/tile/include/uapi/asm/auxvec.h b/arch/tile/include/uapi/asm/auxvec.h
index 1d393ed..c93e927 100644
--- a/arch/tile/include/uapi/asm/auxvec.h
+++ b/arch/tile/include/uapi/asm/auxvec.h
@@ -15,6 +15,7 @@
 #ifndef _ASM_TILE_AUXVEC_H
 #define _ASM_TILE_AUXVEC_H
 
-/* No extensions to auxvec */
+/* The vDSO location. */
+#define AT_SYSINFO_EHDR         33
 
 #endif /* _ASM_TILE_AUXVEC_H */
diff --git a/arch/tile/include/uapi/asm/cachectl.h b/arch/tile/include/uapi/asm/cachectl.h
index af4c9f9..572ddca 100644
--- a/arch/tile/include/uapi/asm/cachectl.h
+++ b/arch/tile/include/uapi/asm/cachectl.h
@@ -29,8 +29,8 @@
  * to honor the arguments at some point.)
  *
  * Flush and invalidation of memory can normally be performed with the
- * __insn_flush(), __insn_inv(), and __insn_finv() instructions from
- * userspace.  The DCACHE option to the system call allows userspace
+ * __insn_flush() and __insn_finv() instructions from userspace.
+ * The DCACHE option to the system call allows userspace
  * to flush the entire L1+L2 data cache from the core.  In this case,
  * the address and length arguments are not used.  The DCACHE flush is
  * restricted to the current core, not all cores in the address space.
diff --git a/arch/tile/kernel/Makefile b/arch/tile/kernel/Makefile
index 5334be8..27a2bf3 100644
--- a/arch/tile/kernel/Makefile
+++ b/arch/tile/kernel/Makefile
@@ -3,11 +3,17 @@
 #
 
 extra-y := vmlinux.lds head_$(BITS).o
-obj-y := backtrace.o entry.o irq.o messaging.o \
+obj-y := backtrace.o entry.o hvglue.o irq.o messaging.o \
 	pci-dma.o proc.o process.o ptrace.o reboot.o \
-	setup.o signal.o single_step.o stack.o sys.o sysfs.o time.o traps.o \
+	setup.o signal.o single_step.o stack.o sys.o \
+	sysfs.o time.o traps.o unaligned.o vdso.o \
 	intvec_$(BITS).o regs_$(BITS).o tile-desc_$(BITS).o
 
+ifdef CONFIG_FUNCTION_TRACER
+CFLAGS_REMOVE_ftrace.o = -pg
+CFLAGS_REMOVE_early_printk.o = -pg
+endif
+
 obj-$(CONFIG_HARDWALL)		+= hardwall.o
 obj-$(CONFIG_COMPAT)		+= compat.o compat_signal.o
 obj-$(CONFIG_SMP)		+= smpboot.o smp.o tlb.o
@@ -20,3 +26,9 @@ else
 obj-$(CONFIG_PCI)		+= pci.o
 endif
 obj-$(CONFIG_TILE_USB)		+= usb.o
+obj-$(CONFIG_TILE_HVGLUE_TRACE)	+= hvglue_trace.o
+obj-$(CONFIG_FUNCTION_TRACER)	+= ftrace.o mcount_64.o
+obj-$(CONFIG_KPROBES)		+= kprobes.o
+obj-$(CONFIG_KGDB)		+= kgdb.o
+
+obj-y				+= vdso/
diff --git a/arch/tile/kernel/asm-offsets.c b/arch/tile/kernel/asm-offsets.c
index 01ddf19..375e7c3 100644
--- a/arch/tile/kernel/asm-offsets.c
+++ b/arch/tile/kernel/asm-offsets.c
@@ -14,13 +14,6 @@
  * Generates definitions from c-type structures used by assembly sources.
  */
 
-#include <linux/kbuild.h>
-#include <linux/thread_info.h>
-#include <linux/sched.h>
-#include <linux/hardirq.h>
-#include <linux/ptrace.h>
-#include <hv/hypervisor.h>
-
 /* Check for compatible compiler early in the build. */
 #ifdef CONFIG_TILEGX
 # ifndef __tilegx__
@@ -31,46 +24,61 @@
 # endif
 #else
 # ifdef __tilegx__
-#  error Can not build TILEPro/TILE64 configurations with tilegx compiler
+#  error Can not build TILEPro configurations with tilegx compiler
 # endif
 #endif
 
+#include <linux/kbuild.h>
+#include <linux/thread_info.h>
+#include <linux/sched.h>
+#include <linux/hardirq.h>
+#include <linux/ptrace.h>
+#include <hv/hypervisor.h>
+
 void foo(void)
 {
-	DEFINE(SINGLESTEP_STATE_BUFFER_OFFSET, \
+	DEFINE(SINGLESTEP_STATE_BUFFER_OFFSET,
 	       offsetof(struct single_step_state, buffer));
-	DEFINE(SINGLESTEP_STATE_FLAGS_OFFSET, \
+	DEFINE(SINGLESTEP_STATE_FLAGS_OFFSET,
 	       offsetof(struct single_step_state, flags));
-	DEFINE(SINGLESTEP_STATE_ORIG_PC_OFFSET, \
+	DEFINE(SINGLESTEP_STATE_ORIG_PC_OFFSET,
 	       offsetof(struct single_step_state, orig_pc));
-	DEFINE(SINGLESTEP_STATE_NEXT_PC_OFFSET, \
+	DEFINE(SINGLESTEP_STATE_NEXT_PC_OFFSET,
 	       offsetof(struct single_step_state, next_pc));
-	DEFINE(SINGLESTEP_STATE_BRANCH_NEXT_PC_OFFSET, \
+	DEFINE(SINGLESTEP_STATE_BRANCH_NEXT_PC_OFFSET,
 	       offsetof(struct single_step_state, branch_next_pc));
-	DEFINE(SINGLESTEP_STATE_UPDATE_VALUE_OFFSET, \
+	DEFINE(SINGLESTEP_STATE_UPDATE_VALUE_OFFSET,
 	       offsetof(struct single_step_state, update_value));
 
-	DEFINE(THREAD_INFO_TASK_OFFSET, \
+	DEFINE(THREAD_INFO_TASK_OFFSET,
 	       offsetof(struct thread_info, task));
-	DEFINE(THREAD_INFO_FLAGS_OFFSET, \
+	DEFINE(THREAD_INFO_FLAGS_OFFSET,
 	       offsetof(struct thread_info, flags));
-	DEFINE(THREAD_INFO_STATUS_OFFSET, \
+	DEFINE(THREAD_INFO_STATUS_OFFSET,
 	       offsetof(struct thread_info, status));
-	DEFINE(THREAD_INFO_HOMECACHE_CPU_OFFSET, \
+	DEFINE(THREAD_INFO_HOMECACHE_CPU_OFFSET,
 	       offsetof(struct thread_info, homecache_cpu));
-	DEFINE(THREAD_INFO_STEP_STATE_OFFSET, \
+	DEFINE(THREAD_INFO_PREEMPT_COUNT_OFFSET,
+	       offsetof(struct thread_info, preempt_count));
+	DEFINE(THREAD_INFO_STEP_STATE_OFFSET,
 	       offsetof(struct thread_info, step_state));
+#ifdef __tilegx__
+	DEFINE(THREAD_INFO_UNALIGN_JIT_BASE_OFFSET,
+	       offsetof(struct thread_info, unalign_jit_base));
+	DEFINE(THREAD_INFO_UNALIGN_JIT_TMP_OFFSET,
+	       offsetof(struct thread_info, unalign_jit_tmp));
+#endif
 
 	DEFINE(TASK_STRUCT_THREAD_KSP_OFFSET,
 	       offsetof(struct task_struct, thread.ksp));
 	DEFINE(TASK_STRUCT_THREAD_PC_OFFSET,
 	       offsetof(struct task_struct, thread.pc));
 
-	DEFINE(HV_TOPOLOGY_WIDTH_OFFSET, \
+	DEFINE(HV_TOPOLOGY_WIDTH_OFFSET,
 	       offsetof(HV_Topology, width));
-	DEFINE(HV_TOPOLOGY_HEIGHT_OFFSET, \
+	DEFINE(HV_TOPOLOGY_HEIGHT_OFFSET,
 	       offsetof(HV_Topology, height));
 
-	DEFINE(IRQ_CPUSTAT_SYSCALL_COUNT_OFFSET, \
+	DEFINE(IRQ_CPUSTAT_SYSCALL_COUNT_OFFSET,
 	       offsetof(irq_cpustat_t, irq_syscall_count));
 }
diff --git a/arch/tile/kernel/compat.c b/arch/tile/kernel/compat.c
index ed37841..4912084 100644
--- a/arch/tile/kernel/compat.c
+++ b/arch/tile/kernel/compat.c
@@ -84,7 +84,7 @@ COMPAT_SYSCALL_DEFINE5(llseek, unsigned int, fd, unsigned int, offset_high,
 {
 	return sys_llseek(fd, offset_high, offset_low, result, origin);
 }
- 
+
 /* Provide the compat syscall number to call mapping. */
 #undef __SYSCALL
 #define __SYSCALL(nr, call) [nr] = (call),
diff --git a/arch/tile/kernel/compat_signal.c b/arch/tile/kernel/compat_signal.c
index d0a052e..85e00b2 100644
--- a/arch/tile/kernel/compat_signal.c
+++ b/arch/tile/kernel/compat_signal.c
@@ -32,6 +32,7 @@
 #include <asm/ucontext.h>
 #include <asm/sigframe.h>
 #include <asm/syscalls.h>
+#include <asm/vdso.h>
 #include <arch/interrupts.h>
 
 struct compat_ucontext {
@@ -227,7 +228,7 @@ int compat_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	if (err)
 		goto give_sigsegv;
 
-	restorer = VDSO_BASE;
+	restorer = VDSO_SYM(&__vdso_rt_sigreturn);
 	if (ka->sa.sa_flags & SA_RESTORER)
 		restorer = ptr_to_compat_reg(ka->sa.sa_restorer);
 
diff --git a/arch/tile/kernel/early_printk.c b/arch/tile/kernel/early_printk.c
index 34d72a1..b608e00 100644
--- a/arch/tile/kernel/early_printk.c
+++ b/arch/tile/kernel/early_printk.c
@@ -23,19 +23,24 @@
 
 static void early_hv_write(struct console *con, const char *s, unsigned n)
 {
-	hv_console_write((HV_VirtAddr) s, n);
+	tile_console_write(s, n);
+
+	/*
+	 * Convert NL to NLCR (close enough to CRNL) during early boot.
+	 * We assume newlines are at the ends of strings, which turns out
+	 * to be good enough for early boot console output.
+	 */
+	if (n && s[n-1] == '\n')
+		tile_console_write("\r", 1);
 }
 
 static struct console early_hv_console = {
 	.name =		"earlyhv",
 	.write =	early_hv_write,
-	.flags =	CON_PRINTBUFFER,
+	.flags =	CON_PRINTBUFFER | CON_BOOT,
 	.index =	-1,
 };
 
-/* Direct interface for emergencies */
-static int early_console_complete;
-
 void early_panic(const char *fmt, ...)
 {
 	va_list ap;
@@ -43,51 +48,21 @@ void early_panic(const char *fmt, ...)
 	va_start(ap, fmt);
 	early_printk("Kernel panic - not syncing: ");
 	early_vprintk(fmt, ap);
-	early_console->write(early_console, "\n", 1);
+	early_printk("\n");
 	va_end(ap);
 	dump_stack();
 	hv_halt();
 }
 
-static int __initdata keep_early;
-
 static int __init setup_early_printk(char *str)
 {
 	if (early_console)
 		return 1;
 
-	if (str != NULL && strncmp(str, "keep", 4) == 0)
-		keep_early = 1;
-
 	early_console = &early_hv_console;
 	register_console(early_console);
 
 	return 0;
 }
 
-void __init disable_early_printk(void)
-{
-	early_console_complete = 1;
-	if (!early_console)
-		return;
-	if (!keep_early) {
-		early_printk("disabling early console\n");
-		unregister_console(early_console);
-		early_console = NULL;
-	} else {
-		early_printk("keeping early console\n");
-	}
-}
-
-void warn_early_printk(void)
-{
-	if (early_console_complete || early_console)
-		return;
-	early_printk("\
-Machine shutting down before console output is fully initialized.\n\
-You may wish to reboot and add the option 'earlyprintk' to your\n\
-boot command line to see any diagnostic early console output.\n\
-");
-}
-
 early_param("earlyprintk", setup_early_printk);
diff --git a/arch/tile/kernel/entry.S b/arch/tile/kernel/entry.S
index f116cb0..3d91759 100644
--- a/arch/tile/kernel/entry.S
+++ b/arch/tile/kernel/entry.S
@@ -27,22 +27,6 @@ STD_ENTRY(current_text_addr)
 	{ move r0, lr; jrp lr }
 	STD_ENDPROC(current_text_addr)
 
-/*
- * We don't run this function directly, but instead copy it to a page
- * we map into every user process.  See vdso_setup().
- *
- * Note that libc has a copy of this function that it uses to compare
- * against the PC when a stack backtrace ends, so if this code is
- * changed, the libc implementation(s) should also be updated.
- */
-	.pushsection .data
-ENTRY(__rt_sigreturn)
-	moveli TREG_SYSCALL_NR_NAME,__NR_rt_sigreturn
-	swint1
-	ENDPROC(__rt_sigreturn)
-	ENTRY(__rt_sigreturn_end)
-	.popsection
-
 STD_ENTRY(dump_stack)
 	{ move r2, lr; lnk r1 }
 	{ move r4, r52; addli r1, r1, dump_stack - . }
diff --git a/arch/tile/kernel/ftrace.c b/arch/tile/kernel/ftrace.c
new file mode 100644
index 0000000..f1c4520
--- /dev/null
+++ b/arch/tile/kernel/ftrace.c
@@ -0,0 +1,246 @@
+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * TILE-Gx specific ftrace support
+ */
+
+#include <linux/ftrace.h>
+#include <linux/uaccess.h>
+
+#include <asm/cacheflush.h>
+#include <asm/ftrace.h>
+#include <asm/sections.h>
+
+#include <arch/opcode.h>
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+static inline tilegx_bundle_bits NOP(void)
+{
+	return create_UnaryOpcodeExtension_X0(FNOP_UNARY_OPCODE_X0) |
+		create_RRROpcodeExtension_X0(UNARY_RRR_0_OPCODE_X0) |
+		create_Opcode_X0(RRR_0_OPCODE_X0) |
+		create_UnaryOpcodeExtension_X1(NOP_UNARY_OPCODE_X1) |
+		create_RRROpcodeExtension_X1(UNARY_RRR_0_OPCODE_X1) |
+		create_Opcode_X1(RRR_0_OPCODE_X1);
+}
+
+static int machine_stopped __read_mostly;
+
+int ftrace_arch_code_modify_prepare(void)
+{
+	machine_stopped = 1;
+	return 0;
+}
+
+int ftrace_arch_code_modify_post_process(void)
+{
+	flush_icache_range(0, CHIP_L1I_CACHE_SIZE());
+	machine_stopped = 0;
+	return 0;
+}
+
+/*
+ * Put { move r10, lr; jal ftrace_caller } in a bundle, this lets dynamic
+ * tracer just add one cycle overhead to every kernel function when disabled.
+ */
+static unsigned long ftrace_gen_branch(unsigned long pc, unsigned long addr,
+				       bool link)
+{
+	tilegx_bundle_bits opcode_x0, opcode_x1;
+	long pcrel_by_instr = (addr - pc) >> TILEGX_LOG2_BUNDLE_SIZE_IN_BYTES;
+
+	if (link) {
+		/* opcode: jal addr */
+		opcode_x1 =
+			create_Opcode_X1(JUMP_OPCODE_X1) |
+			create_JumpOpcodeExtension_X1(JAL_JUMP_OPCODE_X1) |
+			create_JumpOff_X1(pcrel_by_instr);
+	} else {
+		/* opcode: j addr */
+		opcode_x1 =
+			create_Opcode_X1(JUMP_OPCODE_X1) |
+			create_JumpOpcodeExtension_X1(J_JUMP_OPCODE_X1) |
+			create_JumpOff_X1(pcrel_by_instr);
+	}
+
+	if (addr == FTRACE_ADDR) {
+		/* opcode: or r10, lr, zero */
+		opcode_x0 =
+			create_Dest_X0(10) |
+			create_SrcA_X0(TREG_LR) |
+			create_SrcB_X0(TREG_ZERO) |
+			create_RRROpcodeExtension_X0(OR_RRR_0_OPCODE_X0) |
+			create_Opcode_X0(RRR_0_OPCODE_X0);
+	} else {
+		/* opcode: fnop */
+		opcode_x0 =
+			create_UnaryOpcodeExtension_X0(FNOP_UNARY_OPCODE_X0) |
+			create_RRROpcodeExtension_X0(UNARY_RRR_0_OPCODE_X0) |
+			create_Opcode_X0(RRR_0_OPCODE_X0);
+	}
+
+	return opcode_x1 | opcode_x0;
+}
+
+static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec)
+{
+	return NOP();
+}
+
+static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
+{
+	return ftrace_gen_branch(pc, addr, true);
+}
+
+static int ftrace_modify_code(unsigned long pc, unsigned long old,
+			      unsigned long new)
+{
+	unsigned long pc_wr;
+
+	/* Check if the address is in kernel text space and module space. */
+	if (!kernel_text_address(pc))
+		return -EINVAL;
+
+	/* Operate on writable kernel text mapping. */
+	pc_wr = pc - MEM_SV_START + PAGE_OFFSET;
+
+	if (probe_kernel_write((void *)pc_wr, &new, MCOUNT_INSN_SIZE))
+		return -EPERM;
+
+	smp_wmb();
+
+	if (!machine_stopped && num_online_cpus() > 1)
+		flush_icache_range(pc, pc + MCOUNT_INSN_SIZE);
+
+	return 0;
+}
+
+int ftrace_update_ftrace_func(ftrace_func_t func)
+{
+	unsigned long pc, old;
+	unsigned long new;
+	int ret;
+
+	pc = (unsigned long)&ftrace_call;
+	memcpy(&old, &ftrace_call, MCOUNT_INSN_SIZE);
+	new = ftrace_call_replace(pc, (unsigned long)func);
+
+	ret = ftrace_modify_code(pc, old, new);
+
+	return ret;
+}
+
+int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+	unsigned long new, old;
+	unsigned long ip = rec->ip;
+
+	old = ftrace_nop_replace(rec);
+	new = ftrace_call_replace(ip, addr);
+
+	return ftrace_modify_code(rec->ip, old, new);
+}
+
+int ftrace_make_nop(struct module *mod,
+		    struct dyn_ftrace *rec, unsigned long addr)
+{
+	unsigned long ip = rec->ip;
+	unsigned long old;
+	unsigned long new;
+	int ret;
+
+	old = ftrace_call_replace(ip, addr);
+	new = ftrace_nop_replace(rec);
+	ret = ftrace_modify_code(ip, old, new);
+
+	return ret;
+}
+
+int __init ftrace_dyn_arch_init(void *data)
+{
+	*(unsigned long *)data = 0;
+
+	return 0;
+}
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
+			   unsigned long frame_pointer)
+{
+	unsigned long return_hooker = (unsigned long) &return_to_handler;
+	struct ftrace_graph_ent trace;
+	unsigned long old;
+	int err;
+
+	if (unlikely(atomic_read(&current->tracing_graph_pause)))
+		return;
+
+	old = *parent;
+	*parent = return_hooker;
+
+	err = ftrace_push_return_trace(old, self_addr, &trace.depth,
+				       frame_pointer);
+	if (err == -EBUSY) {
+		*parent = old;
+		return;
+	}
+
+	trace.func = self_addr;
+
+	/* Only trace if the calling function expects to */
+	if (!ftrace_graph_entry(&trace)) {
+		current->curr_ret_stack--;
+		*parent = old;
+	}
+}
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+extern unsigned long ftrace_graph_call;
+
+static int __ftrace_modify_caller(unsigned long *callsite,
+				  void (*func) (void), bool enable)
+{
+	unsigned long caller_fn = (unsigned long) func;
+	unsigned long pc = (unsigned long) callsite;
+	unsigned long branch = ftrace_gen_branch(pc, caller_fn, false);
+	unsigned long nop = NOP();
+	unsigned long old = enable ? nop : branch;
+	unsigned long new = enable ? branch : nop;
+
+	return ftrace_modify_code(pc, old, new);
+}
+
+static int ftrace_modify_graph_caller(bool enable)
+{
+	int ret;
+
+	ret = __ftrace_modify_caller(&ftrace_graph_call,
+				     ftrace_graph_caller,
+				     enable);
+
+	return ret;
+}
+
+int ftrace_enable_ftrace_graph_caller(void)
+{
+	return ftrace_modify_graph_caller(true);
+}
+
+int ftrace_disable_ftrace_graph_caller(void)
+{
+	return ftrace_modify_graph_caller(false);
+}
+#endif /* CONFIG_DYNAMIC_FTRACE */
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
diff --git a/arch/tile/kernel/futex_64.S b/arch/tile/kernel/futex_64.S
deleted file mode 100644
index f465d1e..0000000
--- a/arch/tile/kernel/futex_64.S
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2011 Tilera Corporation. All Rights Reserved.
- *
- *   This program is free software; you can redistribute it and/or
- *   modify it under the terms of the GNU General Public License
- *   as published by the Free Software Foundation, version 2.
- *
- *   This program is distributed in the hope that it will be useful, but
- *   WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- *   NON INFRINGEMENT.  See the GNU General Public License for
- *   more details.
- *
- * Atomically access user memory, but use MMU to avoid propagating
- * kernel exceptions.
- */
-
-#include <linux/linkage.h>
-#include <asm/errno.h>
-#include <asm/futex.h>
-#include <asm/page.h>
-#include <asm/processor.h>
-
-/*
- * Provide a set of atomic memory operations supporting <asm/futex.h>.
- *
- * r0: user address to manipulate
- * r1: new value to write, or for cmpxchg, old value to compare against
- * r2: (cmpxchg only) new value to write
- *
- * Return __get_user struct, r0 with value, r1 with error.
- */
-#define FUTEX_OP(name, ...) \
-STD_ENTRY(futex_##name)			\
-	__VA_ARGS__;			\
-	{				\
-	 move   r1, zero;		\
-	 jrp    lr			\
-	};				\
-	STD_ENDPROC(futex_##name);	\
-	.pushsection __ex_table,"a";	\
-	.quad 1b, get_user_fault;	\
-	.popsection
-
-	.pushsection .fixup,"ax"
-get_user_fault:
-	{ movei r1, -EFAULT; jrp lr }
-	ENDPROC(get_user_fault)
-	.popsection
-
-FUTEX_OP(cmpxchg, mtspr CMPEXCH_VALUE, r1; 1: cmpexch4 r0, r0, r2)
-FUTEX_OP(set, 1: exch4 r0, r0, r1)
-FUTEX_OP(add, 1: fetchadd4 r0, r0, r1)
-FUTEX_OP(or, 1: fetchor4 r0, r0, r1)
-FUTEX_OP(andn, nor r1, r1, zero; 1: fetchand4 r0, r0, r1)
diff --git a/arch/tile/kernel/hardwall.c b/arch/tile/kernel/hardwall.c
index 38ac189..531f4c3 100644
--- a/arch/tile/kernel/hardwall.c
+++ b/arch/tile/kernel/hardwall.c
@@ -66,7 +66,7 @@ static struct hardwall_type hardwall_types[] = {
 		0,
 		"udn",
 		LIST_HEAD_INIT(hardwall_types[HARDWALL_UDN].list),
-		__SPIN_LOCK_INITIALIZER(hardwall_types[HARDWALL_UDN].lock),
+		__SPIN_LOCK_UNLOCKED(hardwall_types[HARDWALL_UDN].lock),
 		NULL
 	},
 #ifndef __tilepro__
@@ -77,7 +77,7 @@ static struct hardwall_type hardwall_types[] = {
 		1,  /* disabled pending hypervisor support */
 		"idn",
 		LIST_HEAD_INIT(hardwall_types[HARDWALL_IDN].list),
-		__SPIN_LOCK_INITIALIZER(hardwall_types[HARDWALL_IDN].lock),
+		__SPIN_LOCK_UNLOCKED(hardwall_types[HARDWALL_IDN].lock),
 		NULL
 	},
 	{  /* access to user-space IPI */
@@ -87,7 +87,7 @@ static struct hardwall_type hardwall_types[] = {
 		0,
 		"ipi",
 		LIST_HEAD_INIT(hardwall_types[HARDWALL_IPI].list),
-		__SPIN_LOCK_INITIALIZER(hardwall_types[HARDWALL_IPI].lock),
+		__SPIN_LOCK_UNLOCKED(hardwall_types[HARDWALL_IPI].lock),
 		NULL
 	},
 #endif
@@ -272,9 +272,9 @@ static void hardwall_setup_func(void *info)
 	struct hardwall_info *r = info;
 	struct hardwall_type *hwt = r->type;
 
-	int cpu = smp_processor_id();
-	int x = cpu % smp_width;
-	int y = cpu / smp_width;
+	int cpu = smp_processor_id();  /* on_each_cpu disables preemption */
+	int x = cpu_x(cpu);
+	int y = cpu_y(cpu);
 	int bits = 0;
 	if (x == r->ulhc_x)
 		bits |= W_PROTECT;
@@ -317,6 +317,7 @@ static void hardwall_protect_rectangle(struct hardwall_info *r)
 	on_each_cpu_mask(&rect_cpus, hardwall_setup_func, r, 1);
 }
 
+/* Entered from INT_xDN_FIREWALL interrupt vector with irqs disabled. */
 void __kprobes do_hardwall_trap(struct pt_regs* regs, int fault_num)
 {
 	struct hardwall_info *rect;
@@ -325,7 +326,6 @@ void __kprobes do_hardwall_trap(struct pt_regs* regs, int fault_num)
 	struct siginfo info;
 	int cpu = smp_processor_id();
 	int found_processes;
-	unsigned long flags;
 	struct pt_regs *old_regs = set_irq_regs(regs);
 
 	irq_enter();
@@ -346,7 +346,7 @@ void __kprobes do_hardwall_trap(struct pt_regs* regs, int fault_num)
 	BUG_ON(hwt->disabled);
 
 	/* This tile trapped a network access; find the rectangle. */
-	spin_lock_irqsave(&hwt->lock, flags);
+	spin_lock(&hwt->lock);
 	list_for_each_entry(rect, &hwt->list, list) {
 		if (cpumask_test_cpu(cpu, &rect->cpumask))
 			break;
@@ -401,7 +401,7 @@ void __kprobes do_hardwall_trap(struct pt_regs* regs, int fault_num)
 		pr_notice("hardwall: no associated processes!\n");
 
  done:
-	spin_unlock_irqrestore(&hwt->lock, flags);
+	spin_unlock(&hwt->lock);
 
 	/*
 	 * We have to disable firewall interrupts now, or else when we
@@ -540,6 +540,14 @@ static struct hardwall_info *hardwall_create(struct hardwall_type *hwt,
 		}
 	}
 
+	/*
+	 * Eliminate cpus that are not part of this Linux client.
+	 * Note that this allows for configurations that we might not want to
+	 * support, such as one client on every even cpu, another client on
+	 * every odd cpu.
+	 */
+	cpumask_and(&info->cpumask, &info->cpumask, cpu_online_mask);
+
 	/* Confirm it doesn't overlap and add it to the list. */
 	spin_lock_irqsave(&hwt->lock, flags);
 	list_for_each_entry(iter, &hwt->list, list) {
@@ -612,7 +620,7 @@ static int hardwall_activate(struct hardwall_info *info)
 
 /*
  * Deactivate a task's hardwall.  Must hold lock for hardwall_type.
- * This method may be called from free_task(), so we don't want to
+ * This method may be called from exit_thread(), so we don't want to
  * rely on too many fields of struct task_struct still being valid.
  * We assume the cpus_allowed, pid, and comm fields are still valid.
  */
@@ -653,7 +661,7 @@ static int hardwall_deactivate(struct hardwall_type *hwt,
 		return -EINVAL;
 
 	printk(KERN_DEBUG "Pid %d (%s) deactivated for %s hardwall: cpu %d\n",
-	       task->pid, task->comm, hwt->name, smp_processor_id());
+	       task->pid, task->comm, hwt->name, raw_smp_processor_id());
 	return 0;
 }
 
@@ -795,8 +803,8 @@ static void reset_xdn_network_state(struct hardwall_type *hwt)
 	/* Reset UDN coordinates to their standard value */
 	{
 		unsigned int cpu = smp_processor_id();
-		unsigned int x = cpu % smp_width;
-		unsigned int y = cpu / smp_width;
+		unsigned int x = cpu_x(cpu);
+		unsigned int y = cpu_y(cpu);
 		__insn_mtspr(SPR_UDN_TILE_COORD, (x << 18) | (y << 7));
 	}
 
diff --git a/arch/tile/kernel/head_32.S b/arch/tile/kernel/head_32.S
index ac11530..8d5b40f 100644
--- a/arch/tile/kernel/head_32.S
+++ b/arch/tile/kernel/head_32.S
@@ -39,12 +39,12 @@ ENTRY(_start)
 	}
 	{
 	  moveli r0, _HV_VERSION_OLD_HV_INIT
-	  jal hv_init
+	  jal _hv_init
 	}
 	/* Get a reasonable default ASID in r0 */
 	{
 	  move r0, zero
-	  jal hv_inquire_asid
+	  jal _hv_inquire_asid
 	}
 	/* Install the default page table */
 	{
@@ -64,7 +64,7 @@ ENTRY(_start)
 	  auli r0, r0, ha16(swapper_pg_dir - PAGE_OFFSET)
 	}
 	{
-	  inv r6
+	  finv r6
 	  move r1, zero   /* high 32 bits of CPA is zero */
 	}
 	{
@@ -73,12 +73,12 @@ ENTRY(_start)
 	}
 	{
 	  auli lr, lr, ha16(1f)
-	  j hv_install_context
+	  j _hv_install_context
 	}
 1:
 
 	/* Get our processor number and save it away in SAVE_K_0. */
-	jal hv_inquire_topology
+	jal _hv_inquire_topology
 	mulll_uu r4, r1, r2        /* r1 == y, r2 == width */
 	add r4, r4, r0             /* r0 == x, so r4 == cpu == y*width + x */
 
@@ -86,7 +86,7 @@ ENTRY(_start)
 	/*
 	 * Load up our per-cpu offset.  When the first (master) tile
 	 * boots, this value is still zero, so we will load boot_pc
-	 * with start_kernel, and boot_sp with init_stack + THREAD_SIZE.
+	 * with start_kernel, and boot_sp at the top of init_stack.
 	 * The master tile initializes the per-cpu offset array, so that
 	 * when subsequent (secondary) tiles boot, they will instead load
 	 * from their per-cpu versions of boot_sp and boot_pc.
@@ -126,7 +126,6 @@ ENTRY(_start)
 	lw sp, r1
 	or r4, sp, r4
 	mtspr SPR_SYSTEM_SAVE_K_0, r4  /* save ksp0 + cpu */
-	addi sp, sp, -STACK_TOP_DELTA
 	{
 	  move lr, zero   /* stop backtraces in the called function */
 	  jr r0
@@ -163,8 +162,8 @@ ENTRY(swapper_pg_dir)
 	.set addr, addr + PGDIR_SIZE
 	.endr
 
-	/* The true text VAs are mapped as VA = PA + MEM_SV_INTRPT */
-	PTE MEM_SV_INTRPT, 0, (1 << (HV_PTE_INDEX_READABLE - 32)) | \
+	/* The true text VAs are mapped as VA = PA + MEM_SV_START */
+	PTE MEM_SV_START, 0, (1 << (HV_PTE_INDEX_READABLE - 32)) | \
 			      (1 << (HV_PTE_INDEX_EXECUTABLE - 32))
 	.org swapper_pg_dir + PGDIR_SIZE
 	END(swapper_pg_dir)
diff --git a/arch/tile/kernel/head_64.S b/arch/tile/kernel/head_64.S
index 6093964..bd0e12f 100644
--- a/arch/tile/kernel/head_64.S
+++ b/arch/tile/kernel/head_64.S
@@ -25,6 +25,15 @@
 #include <arch/chip.h>
 #include <arch/spr_def.h>
 
+/* Extract two 32-bit bit values that were read into one register. */
+#ifdef __BIG_ENDIAN__
+#define GET_FIRST_INT(rd, rs) shrsi rd, rs, 32
+#define GET_SECOND_INT(rd, rs) addxi rd, rs, 0
+#else
+#define GET_FIRST_INT(rd, rs) addxi rd, rs, 0
+#define GET_SECOND_INT(rd, rs) shrsi rd, rs, 32
+#endif
+
 /*
  * This module contains the entry code for kernel images. It performs the
  * minimal setup needed to call the generic C routines.
@@ -46,11 +55,11 @@ ENTRY(_start)
 	  movei r2, TILE_CHIP_REV
 	  movei r3, KERNEL_PL
 	}
-	jal hv_init
+	jal _hv_init
 	/* Get a reasonable default ASID in r0 */
 	{
 	  move r0, zero
-	  jal hv_inquire_asid
+	  jal _hv_inquire_asid
 	}
 
 	/*
@@ -61,7 +70,7 @@ ENTRY(_start)
 	 * other CPUs should see a properly-constructed page table.
 	 */
 	{
-	  v4int_l r2, zero, r0    /* ASID for hv_install_context */
+	  GET_FIRST_INT(r2, r0)    /* ASID for hv_install_context */
 	  moveli r4, hw1_last(swapper_pgprot - PAGE_OFFSET)
 	}
 	{
@@ -77,7 +86,7 @@ ENTRY(_start)
 	{
 	  /* After initializing swapper_pgprot, HV_PTE_GLOBAL is set. */
 	  bfextu r7, r1, HV_PTE_INDEX_GLOBAL, HV_PTE_INDEX_GLOBAL
-	  inv r4
+	  finv r4
 	}
 	bnez r7, .Lno_write
 	{
@@ -121,29 +130,24 @@ ENTRY(_start)
 	}
 	{
 	  moveli r3, CTX_PAGE_FLAG
-	  j hv_install_context
+	  j _hv_install_context
 	}
 1:
 
 	/* Install the interrupt base. */
-	moveli r0, hw2_last(MEM_SV_START)
-	shl16insli r0, r0, hw1(MEM_SV_START)
-	shl16insli r0, r0, hw0(MEM_SV_START)
+	moveli r0, hw2_last(intrpt_start)
+	shl16insli r0, r0, hw1(intrpt_start)
+	shl16insli r0, r0, hw0(intrpt_start)
 	mtspr SPR_INTERRUPT_VECTOR_BASE_K, r0
 
-	/*
-	 * Get our processor number and save it away in SAVE_K_0.
-	 * Extract stuff from the topology structure: r4 = y, r6 = x,
-	 * r5 = width.  FIXME: consider whether we want to just make these
-	 * 64-bit values (and if so fix smp_topology write below, too).
-	 */
-	jal hv_inquire_topology
+	/* Get our processor number and save it away in SAVE_K_0. */
+	jal _hv_inquire_topology
 	{
-	  v4int_l r5, zero, r1    /* r5 = width */
-	  shrui r4, r0, 32        /* r4 = y */
+	  GET_FIRST_INT(r5, r1)   /* r5 = width */
+	  GET_SECOND_INT(r4, r0)  /* r4 = y */
 	}
 	{
-	  v4int_l r6, zero, r0    /* r6 = x */
+	  GET_FIRST_INT(r6, r0)   /* r6 = x */
 	  mul_lu_lu r4, r4, r5
 	}
 	{
@@ -154,7 +158,7 @@ ENTRY(_start)
 	/*
 	 * Load up our per-cpu offset.  When the first (master) tile
 	 * boots, this value is still zero, so we will load boot_pc
-	 * with start_kernel, and boot_sp with init_stack + THREAD_SIZE.
+	 * with start_kernel, and boot_sp with at the top of init_stack.
 	 * The master tile initializes the per-cpu offset array, so that
 	 * when subsequent (secondary) tiles boot, they will instead load
 	 * from their per-cpu versions of boot_sp and boot_pc.
@@ -198,9 +202,9 @@ ENTRY(_start)
 	}
 	ld r0, r0
 	ld sp, r1
-	or r4, sp, r4
+	shli r4, r4, CPU_SHIFT
+	bfins r4, sp, 0, CPU_SHIFT-1
 	mtspr SPR_SYSTEM_SAVE_K_0, r4  /* save ksp0 + cpu */
-	addi sp, sp, -STACK_TOP_DELTA
 	{
 	  move lr, zero   /* stop backtraces in the called function */
 	  jr r0
diff --git a/arch/tile/kernel/hvglue.S b/arch/tile/kernel/hvglue.S
new file mode 100644
index 0000000..2ab4566
--- /dev/null
+++ b/arch/tile/kernel/hvglue.S
@@ -0,0 +1,74 @@
+/* Hypervisor call vector addresses; see <hv/hypervisor.h> */
+.macro gensym sym, val, size
+.org \val
+.global _\sym
+.type _\sym,function
+_\sym:
+.size _\sym,\size
+#ifndef CONFIG_TILE_HVGLUE_TRACE
+.globl \sym
+.set \sym,_\sym
+#endif
+.endm
+
+.section .hvglue,"x",@nobits
+.align 8
+gensym hv_init, 0x20, 32
+gensym hv_install_context, 0x40, 32
+gensym hv_sysconf, 0x60, 32
+gensym hv_get_rtc, 0x80, 32
+gensym hv_set_rtc, 0xa0, 32
+gensym hv_flush_asid, 0xc0, 32
+gensym hv_flush_page, 0xe0, 32
+gensym hv_flush_pages, 0x100, 32
+gensym hv_restart, 0x120, 32
+gensym hv_halt, 0x140, 32
+gensym hv_power_off, 0x160, 32
+gensym hv_inquire_physical, 0x180, 32
+gensym hv_inquire_memory_controller, 0x1a0, 32
+gensym hv_inquire_virtual, 0x1c0, 32
+gensym hv_inquire_asid, 0x1e0, 32
+gensym hv_nanosleep, 0x200, 32
+gensym hv_console_read_if_ready, 0x220, 32
+gensym hv_console_write, 0x240, 32
+gensym hv_downcall_dispatch, 0x260, 32
+gensym hv_inquire_topology, 0x280, 32
+gensym hv_fs_findfile, 0x2a0, 32
+gensym hv_fs_fstat, 0x2c0, 32
+gensym hv_fs_pread, 0x2e0, 32
+gensym hv_physaddr_read64, 0x300, 32
+gensym hv_physaddr_write64, 0x320, 32
+gensym hv_get_command_line, 0x340, 32
+gensym hv_set_caching, 0x360, 32
+gensym hv_bzero_page, 0x380, 32
+gensym hv_register_message_state, 0x3a0, 32
+gensym hv_send_message, 0x3c0, 32
+gensym hv_receive_message, 0x3e0, 32
+gensym hv_inquire_context, 0x400, 32
+gensym hv_start_all_tiles, 0x420, 32
+gensym hv_dev_open, 0x440, 32
+gensym hv_dev_close, 0x460, 32
+gensym hv_dev_pread, 0x480, 32
+gensym hv_dev_pwrite, 0x4a0, 32
+gensym hv_dev_poll, 0x4c0, 32
+gensym hv_dev_poll_cancel, 0x4e0, 32
+gensym hv_dev_preada, 0x500, 32
+gensym hv_dev_pwritea, 0x520, 32
+gensym hv_flush_remote, 0x540, 32
+gensym hv_console_putc, 0x560, 32
+gensym hv_inquire_tiles, 0x580, 32
+gensym hv_confstr, 0x5a0, 32
+gensym hv_reexec, 0x5c0, 32
+gensym hv_set_command_line, 0x5e0, 32
+gensym hv_clear_intr, 0x600, 32
+gensym hv_enable_intr, 0x620, 32
+gensym hv_disable_intr, 0x640, 32
+gensym hv_raise_intr, 0x660, 32
+gensym hv_trigger_ipi, 0x680, 32
+gensym hv_store_mapping, 0x6a0, 32
+gensym hv_inquire_realpa, 0x6c0, 32
+gensym hv_flush_all, 0x6e0, 32
+gensym hv_get_ipi_pte, 0x700, 32
+gensym hv_set_pte_super_shift, 0x720, 32
+gensym hv_console_set_ipi, 0x7e0, 32
+gensym hv_glue_internals, 0x800, 30720
diff --git a/arch/tile/kernel/hvglue.lds b/arch/tile/kernel/hvglue.lds
deleted file mode 100644
index d44c5a6..0000000
--- a/arch/tile/kernel/hvglue.lds
+++ /dev/null
@@ -1,59 +0,0 @@
-/* Hypervisor call vector addresses; see <hv/hypervisor.h> */
-hv_init = TEXT_OFFSET + 0x10020;
-hv_install_context = TEXT_OFFSET + 0x10040;
-hv_sysconf = TEXT_OFFSET + 0x10060;
-hv_get_rtc = TEXT_OFFSET + 0x10080;
-hv_set_rtc = TEXT_OFFSET + 0x100a0;
-hv_flush_asid = TEXT_OFFSET + 0x100c0;
-hv_flush_page = TEXT_OFFSET + 0x100e0;
-hv_flush_pages = TEXT_OFFSET + 0x10100;
-hv_restart = TEXT_OFFSET + 0x10120;
-hv_halt = TEXT_OFFSET + 0x10140;
-hv_power_off = TEXT_OFFSET + 0x10160;
-hv_inquire_physical = TEXT_OFFSET + 0x10180;
-hv_inquire_memory_controller = TEXT_OFFSET + 0x101a0;
-hv_inquire_virtual = TEXT_OFFSET + 0x101c0;
-hv_inquire_asid = TEXT_OFFSET + 0x101e0;
-hv_nanosleep = TEXT_OFFSET + 0x10200;
-hv_console_read_if_ready = TEXT_OFFSET + 0x10220;
-hv_console_write = TEXT_OFFSET + 0x10240;
-hv_downcall_dispatch = TEXT_OFFSET + 0x10260;
-hv_inquire_topology = TEXT_OFFSET + 0x10280;
-hv_fs_findfile = TEXT_OFFSET + 0x102a0;
-hv_fs_fstat = TEXT_OFFSET + 0x102c0;
-hv_fs_pread = TEXT_OFFSET + 0x102e0;
-hv_physaddr_read64 = TEXT_OFFSET + 0x10300;
-hv_physaddr_write64 = TEXT_OFFSET + 0x10320;
-hv_get_command_line = TEXT_OFFSET + 0x10340;
-hv_set_caching = TEXT_OFFSET + 0x10360;
-hv_bzero_page = TEXT_OFFSET + 0x10380;
-hv_register_message_state = TEXT_OFFSET + 0x103a0;
-hv_send_message = TEXT_OFFSET + 0x103c0;
-hv_receive_message = TEXT_OFFSET + 0x103e0;
-hv_inquire_context = TEXT_OFFSET + 0x10400;
-hv_start_all_tiles = TEXT_OFFSET + 0x10420;
-hv_dev_open = TEXT_OFFSET + 0x10440;
-hv_dev_close = TEXT_OFFSET + 0x10460;
-hv_dev_pread = TEXT_OFFSET + 0x10480;
-hv_dev_pwrite = TEXT_OFFSET + 0x104a0;
-hv_dev_poll = TEXT_OFFSET + 0x104c0;
-hv_dev_poll_cancel = TEXT_OFFSET + 0x104e0;
-hv_dev_preada = TEXT_OFFSET + 0x10500;
-hv_dev_pwritea = TEXT_OFFSET + 0x10520;
-hv_flush_remote = TEXT_OFFSET + 0x10540;
-hv_console_putc = TEXT_OFFSET + 0x10560;
-hv_inquire_tiles = TEXT_OFFSET + 0x10580;
-hv_confstr = TEXT_OFFSET + 0x105a0;
-hv_reexec = TEXT_OFFSET + 0x105c0;
-hv_set_command_line = TEXT_OFFSET + 0x105e0;
-hv_clear_intr = TEXT_OFFSET + 0x10600;
-hv_enable_intr = TEXT_OFFSET + 0x10620;
-hv_disable_intr = TEXT_OFFSET + 0x10640;
-hv_raise_intr = TEXT_OFFSET + 0x10660;
-hv_trigger_ipi = TEXT_OFFSET + 0x10680;
-hv_store_mapping = TEXT_OFFSET + 0x106a0;
-hv_inquire_realpa = TEXT_OFFSET + 0x106c0;
-hv_flush_all = TEXT_OFFSET + 0x106e0;
-hv_get_ipi_pte = TEXT_OFFSET + 0x10700;
-hv_set_pte_super_shift = TEXT_OFFSET + 0x10720;
-hv_glue_internals = TEXT_OFFSET + 0x10740;
diff --git a/arch/tile/kernel/hvglue_trace.c b/arch/tile/kernel/hvglue_trace.c
new file mode 100644
index 0000000..85c74ad
--- /dev/null
+++ b/arch/tile/kernel/hvglue_trace.c
@@ -0,0 +1,266 @@
+/*
+ * Copyright 2013 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/*
+ * Pull in the hypervisor header so we declare all the ABI functions
+ * with the underscore versions, then undef the names so that we can
+ * provide our own wrapper versions.
+ */
+#define hv_init _hv_init
+#define hv_install_context _hv_install_context
+#define hv_sysconf _hv_sysconf
+#define hv_get_rtc _hv_get_rtc
+#define hv_set_rtc _hv_set_rtc
+#define hv_flush_asid _hv_flush_asid
+#define hv_flush_page _hv_flush_page
+#define hv_flush_pages _hv_flush_pages
+#define hv_restart _hv_restart
+#define hv_halt _hv_halt
+#define hv_power_off _hv_power_off
+#define hv_inquire_physical _hv_inquire_physical
+#define hv_inquire_memory_controller _hv_inquire_memory_controller
+#define hv_inquire_virtual _hv_inquire_virtual
+#define hv_inquire_asid _hv_inquire_asid
+#define hv_nanosleep _hv_nanosleep
+#define hv_console_read_if_ready _hv_console_read_if_ready
+#define hv_console_write _hv_console_write
+#define hv_downcall_dispatch _hv_downcall_dispatch
+#define hv_inquire_topology _hv_inquire_topology
+#define hv_fs_findfile _hv_fs_findfile
+#define hv_fs_fstat _hv_fs_fstat
+#define hv_fs_pread _hv_fs_pread
+#define hv_physaddr_read64 _hv_physaddr_read64
+#define hv_physaddr_write64 _hv_physaddr_write64
+#define hv_get_command_line _hv_get_command_line
+#define hv_set_caching _hv_set_caching
+#define hv_bzero_page _hv_bzero_page
+#define hv_register_message_state _hv_register_message_state
+#define hv_send_message _hv_send_message
+#define hv_receive_message _hv_receive_message
+#define hv_inquire_context _hv_inquire_context
+#define hv_start_all_tiles _hv_start_all_tiles
+#define hv_dev_open _hv_dev_open
+#define hv_dev_close _hv_dev_close
+#define hv_dev_pread _hv_dev_pread
+#define hv_dev_pwrite _hv_dev_pwrite
+#define hv_dev_poll _hv_dev_poll
+#define hv_dev_poll_cancel _hv_dev_poll_cancel
+#define hv_dev_preada _hv_dev_preada
+#define hv_dev_pwritea _hv_dev_pwritea
+#define hv_flush_remote _hv_flush_remote
+#define hv_console_putc _hv_console_putc
+#define hv_inquire_tiles _hv_inquire_tiles
+#define hv_confstr _hv_confstr
+#define hv_reexec _hv_reexec
+#define hv_set_command_line _hv_set_command_line
+#define hv_clear_intr _hv_clear_intr
+#define hv_enable_intr _hv_enable_intr
+#define hv_disable_intr _hv_disable_intr
+#define hv_raise_intr _hv_raise_intr
+#define hv_trigger_ipi _hv_trigger_ipi
+#define hv_store_mapping _hv_store_mapping
+#define hv_inquire_realpa _hv_inquire_realpa
+#define hv_flush_all _hv_flush_all
+#define hv_get_ipi_pte _hv_get_ipi_pte
+#define hv_set_pte_super_shift _hv_set_pte_super_shift
+#define hv_console_set_ipi _hv_console_set_ipi
+#include <hv/hypervisor.h>
+#undef hv_init
+#undef hv_install_context
+#undef hv_sysconf
+#undef hv_get_rtc
+#undef hv_set_rtc
+#undef hv_flush_asid
+#undef hv_flush_page
+#undef hv_flush_pages
+#undef hv_restart
+#undef hv_halt
+#undef hv_power_off
+#undef hv_inquire_physical
+#undef hv_inquire_memory_controller
+#undef hv_inquire_virtual
+#undef hv_inquire_asid
+#undef hv_nanosleep
+#undef hv_console_read_if_ready
+#undef hv_console_write
+#undef hv_downcall_dispatch
+#undef hv_inquire_topology
+#undef hv_fs_findfile
+#undef hv_fs_fstat
+#undef hv_fs_pread
+#undef hv_physaddr_read64
+#undef hv_physaddr_write64
+#undef hv_get_command_line
+#undef hv_set_caching
+#undef hv_bzero_page
+#undef hv_register_message_state
+#undef hv_send_message
+#undef hv_receive_message
+#undef hv_inquire_context
+#undef hv_start_all_tiles
+#undef hv_dev_open
+#undef hv_dev_close
+#undef hv_dev_pread
+#undef hv_dev_pwrite
+#undef hv_dev_poll
+#undef hv_dev_poll_cancel
+#undef hv_dev_preada
+#undef hv_dev_pwritea
+#undef hv_flush_remote
+#undef hv_console_putc
+#undef hv_inquire_tiles
+#undef hv_confstr
+#undef hv_reexec
+#undef hv_set_command_line
+#undef hv_clear_intr
+#undef hv_enable_intr
+#undef hv_disable_intr
+#undef hv_raise_intr
+#undef hv_trigger_ipi
+#undef hv_store_mapping
+#undef hv_inquire_realpa
+#undef hv_flush_all
+#undef hv_get_ipi_pte
+#undef hv_set_pte_super_shift
+#undef hv_console_set_ipi
+
+/*
+ * Provide macros based on <linux/syscalls.h> to provide a wrapper
+ * function that invokes the same function with an underscore prefix.
+ * We can't use the existing __SC_xxx macros because we need to
+ * support up to nine arguments rather than up to six, and also this
+ * way the file stands alone from possible changes in the
+ * implementation of <linux/syscalls.h>.
+ */
+#define HV_WRAP0(type, name)					\
+	type name(void);					\
+	type name(void)						\
+	{							\
+		return _##name();				\
+	}
+#define __HV_DECL1(t1, a1)	t1 a1
+#define __HV_DECL2(t2, a2, ...) t2 a2, __HV_DECL1(__VA_ARGS__)
+#define __HV_DECL3(t3, a3, ...) t3 a3, __HV_DECL2(__VA_ARGS__)
+#define __HV_DECL4(t4, a4, ...) t4 a4, __HV_DECL3(__VA_ARGS__)
+#define __HV_DECL5(t5, a5, ...) t5 a5, __HV_DECL4(__VA_ARGS__)
+#define __HV_DECL6(t6, a6, ...) t6 a6, __HV_DECL5(__VA_ARGS__)
+#define __HV_DECL7(t7, a7, ...) t7 a7, __HV_DECL6(__VA_ARGS__)
+#define __HV_DECL8(t8, a8, ...) t8 a8, __HV_DECL7(__VA_ARGS__)
+#define __HV_DECL9(t9, a9, ...) t9 a9, __HV_DECL8(__VA_ARGS__)
+#define __HV_PASS1(t1, a1)	a1
+#define __HV_PASS2(t2, a2, ...) a2, __HV_PASS1(__VA_ARGS__)
+#define __HV_PASS3(t3, a3, ...) a3, __HV_PASS2(__VA_ARGS__)
+#define __HV_PASS4(t4, a4, ...) a4, __HV_PASS3(__VA_ARGS__)
+#define __HV_PASS5(t5, a5, ...) a5, __HV_PASS4(__VA_ARGS__)
+#define __HV_PASS6(t6, a6, ...) a6, __HV_PASS5(__VA_ARGS__)
+#define __HV_PASS7(t7, a7, ...) a7, __HV_PASS6(__VA_ARGS__)
+#define __HV_PASS8(t8, a8, ...) a8, __HV_PASS7(__VA_ARGS__)
+#define __HV_PASS9(t9, a9, ...) a9, __HV_PASS8(__VA_ARGS__)
+#define HV_WRAPx(x, type, name, ...)				\
+	type name(__HV_DECL##x(__VA_ARGS__));			\
+	type name(__HV_DECL##x(__VA_ARGS__))			\
+	{							\
+		return _##name(__HV_PASS##x(__VA_ARGS__));	\
+	}
+#define HV_WRAP1(type, name, ...) HV_WRAPx(1, type, name, __VA_ARGS__)
+#define HV_WRAP2(type, name, ...) HV_WRAPx(2, type, name, __VA_ARGS__)
+#define HV_WRAP3(type, name, ...) HV_WRAPx(3, type, name, __VA_ARGS__)
+#define HV_WRAP4(type, name, ...) HV_WRAPx(4, type, name, __VA_ARGS__)
+#define HV_WRAP5(type, name, ...) HV_WRAPx(5, type, name, __VA_ARGS__)
+#define HV_WRAP6(type, name, ...) HV_WRAPx(6, type, name, __VA_ARGS__)
+#define HV_WRAP7(type, name, ...) HV_WRAPx(7, type, name, __VA_ARGS__)
+#define HV_WRAP8(type, name, ...) HV_WRAPx(8, type, name, __VA_ARGS__)
+#define HV_WRAP9(type, name, ...) HV_WRAPx(9, type, name, __VA_ARGS__)
+
+/* List all the hypervisor API functions. */
+HV_WRAP4(void, hv_init, HV_VersionNumber, interface_version_number,
+	 int, chip_num, int, chip_rev_num, int, client_pl)
+HV_WRAP1(long, hv_sysconf, HV_SysconfQuery, query)
+HV_WRAP3(int, hv_confstr, HV_ConfstrQuery, query, HV_VirtAddr, buf, int, len)
+#if CHIP_HAS_IPI()
+HV_WRAP3(int, hv_get_ipi_pte, HV_Coord, tile, int, pl, HV_PTE*, pte)
+HV_WRAP3(int, hv_console_set_ipi, int, ipi, int, event, HV_Coord, coord);
+#else
+HV_WRAP1(void, hv_enable_intr, HV_IntrMask, enab_mask)
+HV_WRAP1(void, hv_disable_intr, HV_IntrMask, disab_mask)
+HV_WRAP1(void, hv_clear_intr, HV_IntrMask, clear_mask)
+HV_WRAP1(void, hv_raise_intr, HV_IntrMask, raise_mask)
+HV_WRAP2(HV_Errno, hv_trigger_ipi, HV_Coord, tile, int, interrupt)
+#endif /* !CHIP_HAS_IPI() */
+HV_WRAP3(int, hv_store_mapping, HV_VirtAddr, va, unsigned int, len,
+	 HV_PhysAddr, pa)
+HV_WRAP2(HV_PhysAddr, hv_inquire_realpa, HV_PhysAddr, cpa, unsigned int, len)
+HV_WRAP0(HV_RTCTime, hv_get_rtc)
+HV_WRAP1(void, hv_set_rtc, HV_RTCTime, time)
+HV_WRAP4(int, hv_install_context, HV_PhysAddr, page_table, HV_PTE, access,
+	 HV_ASID, asid, __hv32, flags)
+HV_WRAP2(int, hv_set_pte_super_shift, int, level, int, log2_count)
+HV_WRAP0(HV_Context, hv_inquire_context)
+HV_WRAP1(int, hv_flush_asid, HV_ASID, asid)
+HV_WRAP2(int, hv_flush_page, HV_VirtAddr, address, HV_PageSize, page_size)
+HV_WRAP3(int, hv_flush_pages, HV_VirtAddr, start, HV_PageSize, page_size,
+	 unsigned long, size)
+HV_WRAP1(int, hv_flush_all, int, preserve_global)
+HV_WRAP2(void, hv_restart, HV_VirtAddr, cmd, HV_VirtAddr, args)
+HV_WRAP0(void, hv_halt)
+HV_WRAP0(void, hv_power_off)
+HV_WRAP1(int, hv_reexec, HV_PhysAddr, entry)
+HV_WRAP0(HV_Topology, hv_inquire_topology)
+HV_WRAP3(HV_Errno, hv_inquire_tiles, HV_InqTileSet, set, HV_VirtAddr, cpumask,
+	 int, length)
+HV_WRAP1(HV_PhysAddrRange, hv_inquire_physical, int, idx)
+HV_WRAP2(HV_MemoryControllerInfo, hv_inquire_memory_controller, HV_Coord, coord,
+	 int, controller)
+HV_WRAP1(HV_VirtAddrRange, hv_inquire_virtual, int, idx)
+HV_WRAP1(HV_ASIDRange, hv_inquire_asid, int, idx)
+HV_WRAP1(void, hv_nanosleep, int, nanosecs)
+HV_WRAP0(int, hv_console_read_if_ready)
+HV_WRAP1(void, hv_console_putc, int, byte)
+HV_WRAP2(int, hv_console_write, HV_VirtAddr, bytes, int, len)
+HV_WRAP0(void, hv_downcall_dispatch)
+HV_WRAP1(int, hv_fs_findfile, HV_VirtAddr, filename)
+HV_WRAP1(HV_FS_StatInfo, hv_fs_fstat, int, inode)
+HV_WRAP4(int, hv_fs_pread, int, inode, HV_VirtAddr, buf,
+	 int, length, int, offset)
+HV_WRAP2(unsigned long long, hv_physaddr_read64, HV_PhysAddr, addr,
+	 HV_PTE, access)
+HV_WRAP3(void, hv_physaddr_write64, HV_PhysAddr, addr, HV_PTE, access,
+	 unsigned long long, val)
+HV_WRAP2(int, hv_get_command_line, HV_VirtAddr, buf, int, length)
+HV_WRAP2(HV_Errno, hv_set_command_line, HV_VirtAddr, buf, int, length)
+HV_WRAP1(void, hv_set_caching, unsigned long, bitmask)
+HV_WRAP2(void, hv_bzero_page, HV_VirtAddr, va, unsigned int, size)
+HV_WRAP1(HV_Errno, hv_register_message_state, HV_MsgState*, msgstate)
+HV_WRAP4(int, hv_send_message, HV_Recipient *, recips, int, nrecip,
+	 HV_VirtAddr, buf, int, buflen)
+HV_WRAP3(HV_RcvMsgInfo, hv_receive_message, HV_MsgState, msgstate,
+	 HV_VirtAddr, buf, int, buflen)
+HV_WRAP0(void, hv_start_all_tiles)
+HV_WRAP2(int, hv_dev_open, HV_VirtAddr, name, __hv32, flags)
+HV_WRAP1(int, hv_dev_close, int, devhdl)
+HV_WRAP5(int, hv_dev_pread, int, devhdl, __hv32, flags, HV_VirtAddr, va,
+	 __hv32, len, __hv64, offset)
+HV_WRAP5(int, hv_dev_pwrite, int, devhdl, __hv32, flags, HV_VirtAddr, va,
+	 __hv32, len, __hv64, offset)
+HV_WRAP3(int, hv_dev_poll, int, devhdl, __hv32, events, HV_IntArg, intarg)
+HV_WRAP1(int, hv_dev_poll_cancel, int, devhdl)
+HV_WRAP6(int, hv_dev_preada, int, devhdl, __hv32, flags, __hv32, sgl_len,
+	 HV_SGL *, sglp, __hv64, offset, HV_IntArg, intarg)
+HV_WRAP6(int, hv_dev_pwritea, int, devhdl, __hv32, flags, __hv32, sgl_len,
+	 HV_SGL *, sglp, __hv64, offset, HV_IntArg, intarg)
+HV_WRAP9(int, hv_flush_remote, HV_PhysAddr, cache_pa,
+	 unsigned long, cache_control, unsigned long*, cache_cpumask,
+	 HV_VirtAddr, tlb_va, unsigned long, tlb_length,
+	 unsigned long, tlb_pgsize, unsigned long*, tlb_cpumask,
+	 HV_Remote_ASID*, asids, int, asidcount)
diff --git a/arch/tile/kernel/intvec_32.S b/arch/tile/kernel/intvec_32.S
index cb52d66..2cbe6d5 100644
--- a/arch/tile/kernel/intvec_32.S
+++ b/arch/tile/kernel/intvec_32.S
@@ -28,20 +28,10 @@
 #include <arch/interrupts.h>
 #include <arch/spr_def.h>
 
-#ifdef CONFIG_PREEMPT
-# error "No support for kernel preemption currently"
-#endif
-
 #define PTREGS_PTR(reg, ptreg) addli reg, sp, C_ABI_SAVE_AREA_SIZE + (ptreg)
 
 #define PTREGS_OFFSET_SYSCALL PTREGS_OFFSET_REG(TREG_SYSCALL_NR)
 
-#if !CHIP_HAS_WH64()
-	/* By making this an empty macro, we can use wh64 in the code. */
-	.macro  wh64 reg
-	.endm
-#endif
-
 	.macro  push_reg reg, ptr=sp, delta=-4
 	{
 	 sw     \ptr, \reg
@@ -189,7 +179,7 @@ intvec_\vecname:
 	 * point sp at the top aligned address on the actual stack page.
 	 */
 	mfspr   r0, SPR_SYSTEM_SAVE_K_0
-	mm      r0, r0, zero, LOG2_THREAD_SIZE, 31
+	mm      r0, r0, zero, LOG2_NR_CPU_IDS, 31
 
 0:
 	/*
@@ -207,6 +197,9 @@ intvec_\vecname:
 	 *    cache line 1: r14...r29
 	 *    cache line 0: 2 x frame, r0..r13
 	 */
+#if STACK_TOP_DELTA != 64
+#error STACK_TOP_DELTA must be 64 for assumptions here and in task_pt_regs()
+#endif
 	andi    r0, r0, -64
 
 	/*
@@ -326,18 +319,14 @@ intvec_\vecname:
 	 movei  r3, -1   /* not used, but set for consistency */
 	}
 	.else
-#if CHIP_HAS_AUX_PERF_COUNTERS()
 	.ifc \c_routine, op_handle_aux_perf_interrupt
 	{
 	 mfspr  r2, AUX_PERF_COUNT_STS
 	 movei  r3, -1   /* not used, but set for consistency */
 	}
 	.else
-#endif
 	movei   r3, 0
-#if CHIP_HAS_AUX_PERF_COUNTERS()
 	.endif
-#endif
 	.endif
 	.endif
 	.endif
@@ -354,7 +343,7 @@ intvec_\vecname:
 #ifdef __COLLECT_LINKER_FEEDBACK__
 	.pushsection .text.intvec_feedback,"ax"
 	.org    (\vecnum << 5)
-	FEEDBACK_ENTER_EXPLICIT(intvec_\vecname, .intrpt1, 1 << 8)
+	FEEDBACK_ENTER_EXPLICIT(intvec_\vecname, .intrpt, 1 << 8)
 	jrp     lr
 	.popsection
 #endif
@@ -468,7 +457,7 @@ intvec_\vecname:
 	}
 	{
 	 auli   r21, r21, ha16(__per_cpu_offset)
-	 mm     r20, r20, zero, 0, LOG2_THREAD_SIZE-1
+	 mm     r20, r20, zero, 0, LOG2_NR_CPU_IDS-1
 	}
 	s2a     r20, r20, r21
 	lw      tp, r20
@@ -562,7 +551,6 @@ intvec_\vecname:
 	.endif
 	mtspr   INTERRUPT_CRITICAL_SECTION, zero
 
-#if CHIP_HAS_WH64()
 	/*
 	 * Prepare the first 256 stack bytes to be rapidly accessible
 	 * without having to fetch the background data.  We don't really
@@ -583,7 +571,6 @@ intvec_\vecname:
 	 addi   r52, r52, -64
 	}
 	wh64    r52
-#endif
 
 #ifdef CONFIG_TRACE_IRQFLAGS
 	.ifnc \function,handle_nmi
@@ -762,7 +749,7 @@ intvec_\vecname:
 	.macro  dc_dispatch vecnum, vecname
 	.org    (\vecnum << 8)
 intvec_\vecname:
-	j       hv_downcall_dispatch
+	j       _hv_downcall_dispatch
 	ENDPROC(intvec_\vecname)
 	.endm
 
@@ -812,17 +799,37 @@ STD_ENTRY(interrupt_return)
 	}
 	lw      r29, r29
 	andi    r29, r29, SPR_EX_CONTEXT_1_1__PL_MASK  /* mask off ICS */
+	bzt     r29, .Lresume_userspace
+
+#ifdef CONFIG_PREEMPT
+	/* Returning to kernel space. Check if we need preemption. */
+	GET_THREAD_INFO(r29)
+	addli   r28, r29, THREAD_INFO_FLAGS_OFFSET
 	{
-	 bzt    r29, .Lresume_userspace
-	 PTREGS_PTR(r29, PTREGS_OFFSET_PC)
+	 lw     r28, r28
+	 addli  r29, r29, THREAD_INFO_PREEMPT_COUNT_OFFSET
 	}
+	{
+	 andi   r28, r28, _TIF_NEED_RESCHED
+	 lw     r29, r29
+	}
+	bzt     r28, 1f
+	bnz     r29, 1f
+	/* Disable interrupts explicitly for preemption. */
+	IRQ_DISABLE(r20,r21)
+	TRACE_IRQS_OFF
+	jal     preempt_schedule_irq
+	FEEDBACK_REENTER(interrupt_return)
+1:
+#endif
 
 	/* If we're resuming to _cpu_idle_nap, bump PC forward by 8. */
 	{
-	 lw     r28, r29
+	 PTREGS_PTR(r29, PTREGS_OFFSET_PC)
 	 moveli r27, lo16(_cpu_idle_nap)
 	}
 	{
+	 lw     r28, r29
 	 auli   r27, r27, ha16(_cpu_idle_nap)
 	}
 	{
@@ -1420,7 +1427,6 @@ handle_ill:
 	{
 	 lw     r0, r0          /* indirect thru thread_info to get task_info*/
 	 addi   r1, sp, C_ABI_SAVE_AREA_SIZE  /* put ptregs pointer into r1 */
-	 move   r2, zero        /* load error code into r2 */
 	}
 
 	jal     send_sigtrap    /* issue a SIGTRAP */
@@ -1518,12 +1524,10 @@ STD_ENTRY(_sys_clone)
 	__HEAD
 	.align 64
 	/* Align much later jump on the start of a cache line. */
-#if !ATOMIC_LOCKS_FOUND_VIA_TABLE()
 	nop
 #if PAGE_SIZE >= 0x10000
 	nop
 #endif
-#endif
 ENTRY(sys_cmpxchg)
 
 	/*
@@ -1557,45 +1561,6 @@ ENTRY(sys_cmpxchg)
 # error Code here assumes PAGE_OFFSET can be loaded with just hi16()
 #endif
 
-#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
-	{
-	 /* Check for unaligned input. */
-	 bnz    sp, .Lcmpxchg_badaddr
-	 mm     r25, r0, zero, 3, PAGE_SHIFT-1
-	}
-	{
-	 crc32_32 r25, zero, r25
-	 moveli r21, lo16(atomic_lock_ptr)
-	}
-	{
-	 auli   r21, r21, ha16(atomic_lock_ptr)
-	 auli   r23, zero, hi16(PAGE_OFFSET)  /* hugepage-aligned */
-	}
-	{
-	 shri	r20, r25, 32 - ATOMIC_HASH_L1_SHIFT
-	 slt_u  r23, r0, r23
-	 lw	r26, r0  /* see comment in the "#else" for the "lw r26". */
-	}
-	{
-	 s2a    r21, r20, r21
-	 bbns   r23, .Lcmpxchg_badaddr
-	}
-	{
-	 lw     r21, r21
-	 seqi	r23, TREG_SYSCALL_NR_NAME, __NR_FAST_cmpxchg64
-	 andi	r25, r25, ATOMIC_HASH_L2_SIZE - 1
-	}
-	{
-	 /* Branch away at this point if we're doing a 64-bit cmpxchg. */
-	 bbs    r23, .Lcmpxchg64
-	 andi   r23, r0, 7       /* Precompute alignment for cmpxchg64. */
-	}
-	{
-	 s2a	ATOMIC_LOCK_REG_NAME, r25, r21
-	 j      .Lcmpxchg32_tns   /* see comment in the #else for the jump. */
-	}
-
-#else /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
 	{
 	 /* Check for unaligned input. */
 	 bnz    sp, .Lcmpxchg_badaddr
@@ -1609,7 +1574,7 @@ ENTRY(sys_cmpxchg)
 	  * Because of C pointer arithmetic, we want to compute this:
 	  *
 	  * ((char*)atomic_locks +
-	  *  (((r0 >> 3) & (1 << (ATOMIC_HASH_SIZE - 1))) << 2))
+	  *  (((r0 >> 3) & ((1 << ATOMIC_HASH_SHIFT) - 1)) << 2))
 	  *
 	  * Instead of two shifts we just ">> 1", and use 'mm'
 	  * to ignore the low and high bits we don't want.
@@ -1620,12 +1585,9 @@ ENTRY(sys_cmpxchg)
 
 	 /*
 	  * Ensure that the TLB is loaded before we take out the lock.
-	  * On tilepro, this will start fetching the value all the way
-	  * into our L1 as well (and if it gets modified before we
-	  * grab the lock, it will be invalidated from our cache
-	  * before we reload it).  On tile64, we'll start fetching it
-	  * into our L1 if we're the home, and if we're not, we'll
-	  * still at least start fetching it into the home's L2.
+	  * This will start fetching the value all the way into our L1
+	  * as well (and if it gets modified before we grab the lock,
+	  * it will be invalidated from our cache before we reload it).
 	  */
 	 lw	r26, r0
 	}
@@ -1668,8 +1630,6 @@ ENTRY(sys_cmpxchg)
 	 j      .Lcmpxchg32_tns
 	}
 
-#endif /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
-
 /* Symbol for do_page_fault_ics() to use to compare against the PC. */
 .global __sys_cmpxchg_grab_lock
 __sys_cmpxchg_grab_lock:
@@ -1807,9 +1767,6 @@ __sys_cmpxchg_grab_lock:
 	.align 64
 .Lcmpxchg64:
 	{
-#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
-	 s2a	ATOMIC_LOCK_REG_NAME, r25, r21
-#endif
 	 bzt     r23, .Lcmpxchg64_tns
 	}
 	j       .Lcmpxchg_badaddr
@@ -1875,8 +1832,8 @@ int_unalign:
 	push_extra_callee_saves r0
 	j       do_trap
 
-/* Include .intrpt1 array of interrupt vectors */
-	.section ".intrpt1", "ax"
+/* Include .intrpt array of interrupt vectors */
+	.section ".intrpt", "ax"
 
 #define op_handle_perf_interrupt bad_intr
 #define op_handle_aux_perf_interrupt bad_intr
@@ -1944,10 +1901,8 @@ int_unalign:
 		     do_page_fault
 	int_hand     INT_SN_CPL, SN_CPL, bad_intr
 	int_hand     INT_DOUBLE_FAULT, DOUBLE_FAULT, do_trap
-#if CHIP_HAS_AUX_PERF_COUNTERS()
 	int_hand     INT_AUX_PERF_COUNT, AUX_PERF_COUNT, \
 		     op_handle_aux_perf_interrupt, handle_nmi
-#endif
 
 	/* Synthetic interrupt delivered only by the simulator */
 	int_hand     INT_BREAKPOINT, BREAKPOINT, do_breakpoint
diff --git a/arch/tile/kernel/intvec_64.S b/arch/tile/kernel/intvec_64.S
index 85d4839..b8fc497 100644
--- a/arch/tile/kernel/intvec_64.S
+++ b/arch/tile/kernel/intvec_64.S
@@ -17,25 +17,33 @@
 #include <linux/linkage.h>
 #include <linux/errno.h>
 #include <linux/unistd.h>
+#include <linux/init.h>
 #include <asm/ptrace.h>
 #include <asm/thread_info.h>
 #include <asm/irqflags.h>
 #include <asm/asm-offsets.h>
 #include <asm/types.h>
+#include <asm/traps.h>
 #include <asm/signal.h>
 #include <hv/hypervisor.h>
 #include <arch/abi.h>
 #include <arch/interrupts.h>
 #include <arch/spr_def.h>
 
-#ifdef CONFIG_PREEMPT
-# error "No support for kernel preemption currently"
-#endif
-
 #define PTREGS_PTR(reg, ptreg) addli reg, sp, C_ABI_SAVE_AREA_SIZE + (ptreg)
 
 #define PTREGS_OFFSET_SYSCALL PTREGS_OFFSET_REG(TREG_SYSCALL_NR)
 
+#if CONFIG_KERNEL_PL == 1 || CONFIG_KERNEL_PL == 2
+/*
+ * Set "result" non-zero if ex1 holds the PL of the kernel
+ * (with or without ICS being set).  Note this works only
+ * because we never find the PL at level 3.
+ */
+# define IS_KERNEL_EX1(result, ex1) andi result, ex1, CONFIG_KERNEL_PL
+#else
+# error Recode IS_KERNEL_EX1 for CONFIG_KERNEL_PL
+#endif
 
 	.macro  push_reg reg, ptr=sp, delta=-8
 	{
@@ -98,6 +106,185 @@
 	}
 	.endm
 
+	/*
+	 * Unalign data exception fast handling: In order to handle
+	 * unaligned data access, a fast JIT version is generated and stored
+	 * in a specific area in user space. We first need to do a quick poke
+	 * to see if the JIT is available. We use certain bits in the fault
+	 * PC (3 to 9 is used for 16KB page size) as index to address the JIT
+	 * code area. The first 64bit word is the fault PC, and the 2nd one is
+	 * the fault bundle itself. If these 2 words both match, then we
+	 * directly "iret" to JIT code. If not, a slow path is invoked to
+	 * generate new JIT code. Note: the current JIT code WILL be
+	 * overwritten if it existed. So, ideally we can handle 128 unalign
+	 * fixups via JIT. For lookup efficiency and to effectively support
+	 * tight loops with multiple unaligned reference, a simple
+	 * direct-mapped cache is used.
+	 *
+	 * SPR_EX_CONTEXT_K_0 is modified to return to JIT code.
+	 * SPR_EX_CONTEXT_K_1 has ICS set.
+	 * SPR_EX_CONTEXT_0_0 is setup to user program's next PC.
+	 * SPR_EX_CONTEXT_0_1 = 0.
+	 */
+	.macro int_hand_unalign_fast  vecnum, vecname
+	.org  (\vecnum << 8)
+intvec_\vecname:
+	/* Put r3 in SPR_SYSTEM_SAVE_K_1.  */
+	mtspr   SPR_SYSTEM_SAVE_K_1, r3
+
+	mfspr   r3, SPR_EX_CONTEXT_K_1
+	/*
+	 * Examine if exception comes from user without ICS set.
+	 * If not, just go directly to the slow path.
+	 */
+	bnez    r3, hand_unalign_slow_nonuser
+
+	mfspr   r3, SPR_SYSTEM_SAVE_K_0
+
+	/* Get &thread_info->unalign_jit_tmp[0] in r3. */
+	bfexts  r3, r3, 0, CPU_SHIFT-1
+	mm      r3, zero, LOG2_THREAD_SIZE, 63
+	addli   r3, r3, THREAD_INFO_UNALIGN_JIT_TMP_OFFSET
+
+	/*
+	 * Save r0, r1, r2 into thread_info array r3 points to
+	 * from low to high memory in order.
+	 */
+	st_add  r3, r0, 8
+	st_add  r3, r1, 8
+	{
+	 st_add r3, r2, 8
+	 andi   r2, sp, 7
+	}
+
+	/* Save stored r3 value so we can revert it on a page fault. */
+	mfspr   r1, SPR_SYSTEM_SAVE_K_1
+	st      r3, r1
+
+	{
+	 /* Generate a SIGBUS if sp is not 8-byte aligned. */
+	 bnez   r2, hand_unalign_slow_badsp
+	}
+
+	/*
+	 * Get the thread_info in r0; load r1 with pc. Set the low bit of sp
+	 * as an indicator to the page fault code in case we fault.
+	 */
+	{
+	 ori    sp, sp, 1
+	 mfspr  r1, SPR_EX_CONTEXT_K_0
+	}
+
+	/* Add the jit_info offset in thread_info; extract r1 [3:9] into r2. */
+	{
+	 addli  r0, r3, THREAD_INFO_UNALIGN_JIT_BASE_OFFSET - \
+	  (THREAD_INFO_UNALIGN_JIT_TMP_OFFSET + (3 * 8))
+	 bfextu r2, r1, 3, (2 + PAGE_SHIFT - UNALIGN_JIT_SHIFT)
+	}
+
+	/* Load the jit_info; multiply r2 by 128. */
+	{
+	 ld     r0, r0
+	 shli   r2, r2, UNALIGN_JIT_SHIFT
+	}
+
+	/*
+	 * If r0 is NULL, the JIT page is not mapped, so go to slow path;
+	 * add offset r2 to r0 at the same time.
+	 */
+	{
+	 beqz   r0, hand_unalign_slow
+	 add    r2, r0, r2
+	}
+
+        /*
+	 * We are loading from userspace (both the JIT info PC and
+	 * instruction word, and the instruction word we executed)
+	 * and since either could fault while holding the interrupt
+	 * critical section, we must tag this region and check it in
+	 * do_page_fault() to handle it properly.
+	 */
+ENTRY(__start_unalign_asm_code)
+
+	/* Load first word of JIT in r0 and increment r2 by 8. */
+	ld_add  r0, r2, 8
+
+	/*
+	 * Compare the PC with the 1st word in JIT; load the fault bundle
+	 * into r1.
+	 */
+	{
+	 cmpeq  r0, r0, r1
+	 ld     r1, r1
+	}
+
+	/* Go to slow path if PC doesn't match. */
+	beqz    r0, hand_unalign_slow
+
+	/*
+	 * Load the 2nd word of JIT, which is supposed to be the fault
+	 * bundle for a cache hit. Increment r2; after this bundle r2 will
+	 * point to the potential start of the JIT code we want to run.
+	 */
+	ld_add  r0, r2, 8
+
+	/* No further accesses to userspace are done after this point. */
+ENTRY(__end_unalign_asm_code)
+
+	/* Compare the real bundle with what is saved in the JIT area. */
+	{
+	 cmpeq  r0, r1, r0
+	 mtspr  SPR_EX_CONTEXT_0_1, zero
+	}
+
+	/* Go to slow path if the fault bundle does not match. */
+	beqz    r0, hand_unalign_slow
+
+	/*
+	 * A cache hit is found.
+	 * r2 points to start of JIT code (3rd word).
+	 * r0 is the fault pc.
+	 * r1 is the fault bundle.
+	 * Reset the low bit of sp.
+	 */
+	{
+	 mfspr  r0, SPR_EX_CONTEXT_K_0
+	 andi   sp, sp, ~1
+	}
+
+	/* Write r2 into EX_CONTEXT_K_0 and increment PC. */
+	{
+	 mtspr  SPR_EX_CONTEXT_K_0, r2
+	 addi   r0, r0, 8
+	}
+
+	/*
+	 * Set ICS on kernel EX_CONTEXT_K_1 in order to "iret" to
+	 * user with ICS set. This way, if the JIT fixup causes another
+	 * unalign exception (which shouldn't be possible) the user
+	 * process will be terminated with SIGBUS. Also, our fixup will
+	 * run without interleaving with external interrupts.
+	 * Each fixup is at most 14 bundles, so it won't hold ICS for long.
+	 */
+	{
+	 movei  r1, PL_ICS_EX1(USER_PL, 1)
+	 mtspr  SPR_EX_CONTEXT_0_0, r0
+	}
+
+	{
+	 mtspr  SPR_EX_CONTEXT_K_1, r1
+	 addi   r3, r3, -(3 * 8)
+	}
+
+	/* Restore r0..r3. */
+	ld_add  r0, r3, 8
+	ld_add  r1, r3, 8
+	ld_add  r2, r3, 8
+	ld      r3, r3
+
+	iret
+	ENDPROC(intvec_\vecname)
+	.endm
 
 #ifdef __COLLECT_LINKER_FEEDBACK__
 	.pushsection .text.intvec_feedback,"ax"
@@ -118,15 +305,21 @@ intvec_feedback:
 	 * The "processing" argument specifies the code for processing
 	 * the interrupt. Defaults to "handle_interrupt".
 	 */
-	.macro  int_hand vecnum, vecname, c_routine, processing=handle_interrupt
-	.org    (\vecnum << 8)
+	.macro __int_hand vecnum, vecname, c_routine,processing=handle_interrupt
 intvec_\vecname:
 	/* Temporarily save a register so we have somewhere to work. */
 
 	mtspr   SPR_SYSTEM_SAVE_K_1, r0
 	mfspr   r0, SPR_EX_CONTEXT_K_1
 
-	andi    r0, r0, SPR_EX_CONTEXT_1_1__PL_MASK  /* mask off ICS */
+	/*
+	 * The unalign data fastpath code sets the low bit in sp to
+	 * force us to reset it here on fault.
+	 */
+	{
+	 blbs   sp, 2f
+	 IS_KERNEL_EX1(r0, r0)
+	}
 
 	.ifc    \vecnum, INT_DOUBLE_FAULT
 	/*
@@ -176,15 +369,15 @@ intvec_\vecname:
 	}
 	.endif
 
-
+2:
 	/*
-	 * SYSTEM_SAVE_K_0 holds the cpu number in the low bits, and
-	 * the current stack top in the higher bits.  So we recover
-	 * our stack top by just masking off the low bits, then
+	 * SYSTEM_SAVE_K_0 holds the cpu number in the high bits, and
+	 * the current stack top in the lower bits.  So we recover
+	 * our starting stack value by sign-extending the low bits, then
 	 * point sp at the top aligned address on the actual stack page.
 	 */
 	mfspr   r0, SPR_SYSTEM_SAVE_K_0
-	mm      r0, zero, LOG2_THREAD_SIZE, 63
+	bfexts  r0, r0, 0, CPU_SHIFT-1
 
 0:
 	/*
@@ -206,6 +399,9 @@ intvec_\vecname:
 	 *    cache line 1: r6...r13
 	 *    cache line 0: 2 x frame, r0..r5
 	 */
+#if STACK_TOP_DELTA != 64
+#error STACK_TOP_DELTA must be 64 for assumptions here and in task_pt_regs()
+#endif
 	andi    r0, r0, -64
 
 	/*
@@ -305,7 +501,7 @@ intvec_\vecname:
 	mfspr   r3, SPR_SYSTEM_SAVE_K_2   /* info about page fault */
 	.else
 	.ifc \vecnum, INT_ILL_TRANS
-	mfspr   r2, ILL_TRANS_REASON
+	mfspr   r2, ILL_VA_PC
 	.else
 	.ifc \vecnum, INT_DOUBLE_FAULT
 	mfspr   r2, SPR_SYSTEM_SAVE_K_2   /* double fault info from HV */
@@ -315,12 +511,10 @@ intvec_\vecname:
 	.else
 	.ifc \c_routine, op_handle_perf_interrupt
 	mfspr   r2, PERF_COUNT_STS
-#if CHIP_HAS_AUX_PERF_COUNTERS()
 	.else
 	.ifc \c_routine, op_handle_aux_perf_interrupt
 	mfspr   r2, AUX_PERF_COUNT_STS
 	.endif
-#endif
 	.endif
 	.endif
 	.endif
@@ -339,7 +533,7 @@ intvec_\vecname:
 #ifdef __COLLECT_LINKER_FEEDBACK__
 	.pushsection .text.intvec_feedback,"ax"
 	.org    (\vecnum << 5)
-	FEEDBACK_ENTER_EXPLICIT(intvec_\vecname, .intrpt1, 1 << 8)
+	FEEDBACK_ENTER_EXPLICIT(intvec_\vecname, .intrpt, 1 << 8)
 	jrp     lr
 	.popsection
 #endif
@@ -455,11 +649,12 @@ intvec_\vecname:
 	/*
 	 * If we will be returning to the kernel, we will need to
 	 * reset the interrupt masks to the state they had before.
-	 * Set DISABLE_IRQ in flags iff we came from PL1 with irqs disabled.
+	 * Set DISABLE_IRQ in flags iff we came from kernel pl with
+	 * irqs disabled.
 	 */
 	mfspr   r32, SPR_EX_CONTEXT_K_1
 	{
-	 andi   r32, r32, SPR_EX_CONTEXT_1_1__PL_MASK  /* mask off ICS */
+	 IS_KERNEL_EX1(r22, r22)
 	 PTREGS_PTR(r21, PTREGS_OFFSET_FLAGS)
 	}
 	beqzt   r32, 1f       /* zero if from user space */
@@ -503,7 +698,7 @@ intvec_\vecname:
 	}
 	{
 	 shl16insli r21, r21, hw1(__per_cpu_offset)
-	 bfextu r20, r20, 0, LOG2_THREAD_SIZE-1
+	 bfextu r20, r20, CPU_SHIFT, 63
 	}
 	shl16insli r21, r21, hw0(__per_cpu_offset)
 	shl3add r20, r20, r21
@@ -585,7 +780,7 @@ intvec_\vecname:
 	.macro  dc_dispatch vecnum, vecname
 	.org    (\vecnum << 8)
 intvec_\vecname:
-	j       hv_downcall_dispatch
+	j       _hv_downcall_dispatch
 	ENDPROC(intvec_\vecname)
 	.endm
 
@@ -626,14 +821,39 @@ STD_ENTRY(interrupt_return)
 	 PTREGS_PTR(r29, PTREGS_OFFSET_EX1)
 	}
 	ld      r29, r29
-	andi    r29, r29, SPR_EX_CONTEXT_1_1__PL_MASK  /* mask off ICS */
+	IS_KERNEL_EX1(r29, r29)
 	{
 	 beqzt  r29, .Lresume_userspace
-	 PTREGS_PTR(r29, PTREGS_OFFSET_PC)
+	 move   r29, sp
+	}
+
+#ifdef CONFIG_PREEMPT
+	/* Returning to kernel space. Check if we need preemption. */
+	EXTRACT_THREAD_INFO(r29)
+	addli   r28, r29, THREAD_INFO_FLAGS_OFFSET
+	{
+	 ld     r28, r28
+	 addli  r29, r29, THREAD_INFO_PREEMPT_COUNT_OFFSET
+	}
+	{
+	 andi   r28, r28, _TIF_NEED_RESCHED
+	 ld4s   r29, r29
 	}
+	beqzt   r28, 1f
+	bnez    r29, 1f
+	/* Disable interrupts explicitly for preemption. */
+	IRQ_DISABLE(r20,r21)
+	TRACE_IRQS_OFF
+	jal     preempt_schedule_irq
+	FEEDBACK_REENTER(interrupt_return)
+1:
+#endif
 
 	/* If we're resuming to _cpu_idle_nap, bump PC forward by 8. */
-	moveli  r27, hw2_last(_cpu_idle_nap)
+	{
+	 moveli r27, hw2_last(_cpu_idle_nap)
+	 PTREGS_PTR(r29, PTREGS_OFFSET_PC)
+	}
 	{
 	 ld     r28, r29
 	 shl16insli r27, r27, hw1(_cpu_idle_nap)
@@ -728,7 +948,7 @@ STD_ENTRY(interrupt_return)
 	 PTREGS_PTR(r32, PTREGS_OFFSET_FLAGS)
 	}
 	{
-	 andi   r0, r0, SPR_EX_CONTEXT_1_1__PL_MASK
+	 IS_KERNEL_EX1(r0, r0)
 	 ld     r32, r32
 	}
 	bnez    r0, 1f
@@ -799,7 +1019,7 @@ STD_ENTRY(interrupt_return)
 	pop_reg r21, sp, PTREGS_OFFSET_REG(31) - PTREGS_OFFSET_PC
 	{
 	 mtspr  SPR_EX_CONTEXT_K_1, lr
-	 andi   lr, lr, SPR_EX_CONTEXT_1_1__PL_MASK  /* mask off ICS */
+	 IS_KERNEL_EX1(lr, lr)
 	}
 	{
 	 mtspr  SPR_EX_CONTEXT_K_0, r21
@@ -1223,10 +1443,31 @@ STD_ENTRY(_sys_clone)
 	j       sys_clone
 	STD_ENDPROC(_sys_clone)
 
-/* The single-step support may need to read all the registers. */
+	/*
+	 * Recover r3, r2, r1 and r0 here saved by unalign fast vector.
+	 * The vector area limit is 32 bundles, so we handle the reload here.
+	 * r0, r1, r2 are in thread_info from low to high memory in order.
+	 * r3 points to location the original r3 was saved.
+	 * We put this code in the __HEAD section so it can be reached
+	 * via a conditional branch from the fast path.
+	 */
+	__HEAD
+hand_unalign_slow:
+	andi    sp, sp, ~1
+hand_unalign_slow_badsp:
+	addi    r3, r3, -(3 * 8)
+	ld_add  r0, r3, 8
+	ld_add  r1, r3, 8
+	ld      r2, r3
+hand_unalign_slow_nonuser:
+	mfspr   r3, SPR_SYSTEM_SAVE_K_1
+	__int_hand     INT_UNALIGN_DATA, UNALIGN_DATA_SLOW, int_unalign
+
+/* The unaligned data support needs to read all the registers. */
 int_unalign:
 	push_extra_callee_saves r0
-	j       do_trap
+	j       do_unaligned
+ENDPROC(hand_unalign_slow)
 
 /* Fill the return address stack with nonzero entries. */
 STD_ENTRY(fill_ra_stack)
@@ -1240,8 +1481,15 @@ STD_ENTRY(fill_ra_stack)
 4:	jrp	r0
 	STD_ENDPROC(fill_ra_stack)
 
-/* Include .intrpt1 array of interrupt vectors */
-	.section ".intrpt1", "ax"
+	.macro int_hand  vecnum, vecname, c_routine, processing=handle_interrupt
+	.org   (\vecnum << 8)
+		__int_hand   \vecnum, \vecname, \c_routine, \processing
+	.endm
+
+/* Include .intrpt array of interrupt vectors */
+	.section ".intrpt", "ax"
+	.global intrpt_start
+intrpt_start:
 
 #define op_handle_perf_interrupt bad_intr
 #define op_handle_aux_perf_interrupt bad_intr
@@ -1272,7 +1520,7 @@ STD_ENTRY(fill_ra_stack)
 	int_hand     INT_SWINT_1, SWINT_1, SYSCALL, handle_syscall
 	int_hand     INT_SWINT_0, SWINT_0, do_trap
 	int_hand     INT_ILL_TRANS, ILL_TRANS, do_trap
-	int_hand     INT_UNALIGN_DATA, UNALIGN_DATA, int_unalign
+	int_hand_unalign_fast INT_UNALIGN_DATA, UNALIGN_DATA
 	int_hand     INT_DTLB_MISS, DTLB_MISS, do_page_fault
 	int_hand     INT_DTLB_ACCESS, DTLB_ACCESS, do_page_fault
 	int_hand     INT_IDN_FIREWALL, IDN_FIREWALL, do_hardwall_trap
diff --git a/arch/tile/kernel/irq.c b/arch/tile/kernel/irq.c
index 3ccf2cd..0586fdb 100644
--- a/arch/tile/kernel/irq.c
+++ b/arch/tile/kernel/irq.c
@@ -55,7 +55,8 @@ static DEFINE_PER_CPU(int, irq_depth);
 
 /* State for allocating IRQs on Gx. */
 #if CHIP_HAS_IPI()
-static unsigned long available_irqs = ~(1UL << IRQ_RESCHEDULE);
+static unsigned long available_irqs = ((1UL << NR_IRQS) - 1) &
+				      (~(1UL << IRQ_RESCHEDULE));
 static DEFINE_SPINLOCK(available_irqs_lock);
 #endif
 
@@ -73,7 +74,8 @@ static DEFINE_SPINLOCK(available_irqs_lock);
 
 /*
  * The interrupt handling path, implemented in terms of HV interrupt
- * emulation on TILE64 and TILEPro, and IPI hardware on TILE-Gx.
+ * emulation on TILEPro, and IPI hardware on TILE-Gx.
+ * Entered with interrupts disabled.
  */
 void tile_dev_intr(struct pt_regs *regs, int intnum)
 {
@@ -233,7 +235,7 @@ void tile_irq_activate(unsigned int irq, int tile_irq_type)
 {
 	/*
 	 * We use handle_level_irq() by default because the pending
-	 * interrupt vector (whether modeled by the HV on TILE64 and
+	 * interrupt vector (whether modeled by the HV on
 	 * TILEPro or implemented in hardware on TILE-Gx) has
 	 * level-style semantics for each bit.  An interrupt fires
 	 * whenever a bit is high, not just at edges.
diff --git a/arch/tile/kernel/kgdb.c b/arch/tile/kernel/kgdb.c
new file mode 100644
index 0000000..4cd8838
--- /dev/null
+++ b/arch/tile/kernel/kgdb.c
@@ -0,0 +1,499 @@
+/*
+ * Copyright 2013 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * TILE-Gx KGDB support.
+ */
+
+#include <linux/ptrace.h>
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
+#include <linux/uaccess.h>
+#include <linux/module.h>
+#include <asm/cacheflush.h>
+
+static tile_bundle_bits singlestep_insn = TILEGX_BPT_BUNDLE | DIE_SSTEPBP;
+static unsigned long stepped_addr;
+static tile_bundle_bits stepped_instr;
+
+struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] = {
+	{ "r0", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[0])},
+	{ "r1", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[1])},
+	{ "r2", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[2])},
+	{ "r3", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[3])},
+	{ "r4", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[4])},
+	{ "r5", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[5])},
+	{ "r6", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[6])},
+	{ "r7", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[7])},
+	{ "r8", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[8])},
+	{ "r9", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[9])},
+	{ "r10", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[10])},
+	{ "r11", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[11])},
+	{ "r12", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[12])},
+	{ "r13", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[13])},
+	{ "r14", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[14])},
+	{ "r15", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[15])},
+	{ "r16", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[16])},
+	{ "r17", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[17])},
+	{ "r18", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[18])},
+	{ "r19", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[19])},
+	{ "r20", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[20])},
+	{ "r21", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[21])},
+	{ "r22", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[22])},
+	{ "r23", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[23])},
+	{ "r24", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[24])},
+	{ "r25", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[25])},
+	{ "r26", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[26])},
+	{ "r27", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[27])},
+	{ "r28", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[28])},
+	{ "r29", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[29])},
+	{ "r30", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[30])},
+	{ "r31", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[31])},
+	{ "r32", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[32])},
+	{ "r33", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[33])},
+	{ "r34", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[34])},
+	{ "r35", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[35])},
+	{ "r36", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[36])},
+	{ "r37", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[37])},
+	{ "r38", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[38])},
+	{ "r39", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[39])},
+	{ "r40", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[40])},
+	{ "r41", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[41])},
+	{ "r42", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[42])},
+	{ "r43", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[43])},
+	{ "r44", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[44])},
+	{ "r45", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[45])},
+	{ "r46", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[46])},
+	{ "r47", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[47])},
+	{ "r48", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[48])},
+	{ "r49", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[49])},
+	{ "r50", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[50])},
+	{ "r51", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[51])},
+	{ "r52", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[52])},
+	{ "tp", GDB_SIZEOF_REG, offsetof(struct pt_regs, tp)},
+	{ "sp", GDB_SIZEOF_REG, offsetof(struct pt_regs, sp)},
+	{ "lr", GDB_SIZEOF_REG, offsetof(struct pt_regs, lr)},
+	{ "sn", GDB_SIZEOF_REG, -1},
+	{ "idn0", GDB_SIZEOF_REG, -1},
+	{ "idn1", GDB_SIZEOF_REG, -1},
+	{ "udn0", GDB_SIZEOF_REG, -1},
+	{ "udn1", GDB_SIZEOF_REG, -1},
+	{ "udn2", GDB_SIZEOF_REG, -1},
+	{ "udn3", GDB_SIZEOF_REG, -1},
+	{ "zero", GDB_SIZEOF_REG, -1},
+	{ "pc", GDB_SIZEOF_REG, offsetof(struct pt_regs, pc)},
+	{ "faultnum", GDB_SIZEOF_REG, offsetof(struct pt_regs, faultnum)},
+};
+
+char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs)
+{
+	if (regno >= DBG_MAX_REG_NUM || regno < 0)
+		return NULL;
+
+	if (dbg_reg_def[regno].offset != -1)
+		memcpy(mem, (void *)regs + dbg_reg_def[regno].offset,
+		       dbg_reg_def[regno].size);
+	else
+		memset(mem, 0, dbg_reg_def[regno].size);
+	return dbg_reg_def[regno].name;
+}
+
+int dbg_set_reg(int regno, void *mem, struct pt_regs *regs)
+{
+	if (regno >= DBG_MAX_REG_NUM || regno < 0)
+		return -EINVAL;
+
+	if (dbg_reg_def[regno].offset != -1)
+		memcpy((void *)regs + dbg_reg_def[regno].offset, mem,
+		       dbg_reg_def[regno].size);
+	return 0;
+}
+
+/*
+ * Similar to pt_regs_to_gdb_regs() except that process is sleeping and so
+ * we may not be able to get all the info.
+ */
+void
+sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task)
+{
+	int reg;
+	struct pt_regs *thread_regs;
+	unsigned long *ptr = gdb_regs;
+
+	if (task == NULL)
+		return;
+
+	/* Initialize to zero. */
+	memset(gdb_regs, 0, NUMREGBYTES);
+
+	thread_regs = task_pt_regs(task);
+	for (reg = 0; reg <= TREG_LAST_GPR; reg++)
+		*(ptr++) = thread_regs->regs[reg];
+
+	gdb_regs[TILEGX_PC_REGNUM] = thread_regs->pc;
+	gdb_regs[TILEGX_FAULTNUM_REGNUM] = thread_regs->faultnum;
+}
+
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc)
+{
+	regs->pc = pc;
+}
+
+static void kgdb_call_nmi_hook(void *ignored)
+{
+	kgdb_nmicallback(raw_smp_processor_id(), NULL);
+}
+
+void kgdb_roundup_cpus(unsigned long flags)
+{
+	local_irq_enable();
+	smp_call_function(kgdb_call_nmi_hook, NULL, 0);
+	local_irq_disable();
+}
+
+/*
+ * Convert a kernel address to the writable kernel text mapping.
+ */
+static unsigned long writable_address(unsigned long addr)
+{
+	unsigned long ret = 0;
+
+	if (core_kernel_text(addr))
+		ret = addr - MEM_SV_START + PAGE_OFFSET;
+	else if (is_module_text_address(addr))
+		ret = addr;
+	else
+		pr_err("Unknown virtual address 0x%lx\n", addr);
+
+	return ret;
+}
+
+/*
+ * Calculate the new address for after a step.
+ */
+static unsigned long get_step_address(struct pt_regs *regs)
+{
+	int src_reg;
+	int jump_off;
+	int br_off;
+	unsigned long addr;
+	unsigned int opcode;
+	tile_bundle_bits bundle;
+
+	/* Move to the next instruction by default. */
+	addr = regs->pc + TILEGX_BUNDLE_SIZE_IN_BYTES;
+	bundle = *(unsigned long *)instruction_pointer(regs);
+
+	/* 0: X mode, Otherwise: Y mode. */
+	if (bundle & TILEGX_BUNDLE_MODE_MASK) {
+		if (get_Opcode_Y1(bundle) == RRR_1_OPCODE_Y1 &&
+		    get_RRROpcodeExtension_Y1(bundle) ==
+		    UNARY_RRR_1_OPCODE_Y1) {
+			opcode = get_UnaryOpcodeExtension_Y1(bundle);
+
+			switch (opcode) {
+			case JALR_UNARY_OPCODE_Y1:
+			case JALRP_UNARY_OPCODE_Y1:
+			case JR_UNARY_OPCODE_Y1:
+			case JRP_UNARY_OPCODE_Y1:
+				src_reg = get_SrcA_Y1(bundle);
+				dbg_get_reg(src_reg, &addr, regs);
+				break;
+			}
+		}
+	} else if (get_Opcode_X1(bundle) == RRR_0_OPCODE_X1) {
+		if (get_RRROpcodeExtension_X1(bundle) ==
+		    UNARY_RRR_0_OPCODE_X1) {
+			opcode = get_UnaryOpcodeExtension_X1(bundle);
+
+			switch (opcode) {
+			case JALR_UNARY_OPCODE_X1:
+			case JALRP_UNARY_OPCODE_X1:
+			case JR_UNARY_OPCODE_X1:
+			case JRP_UNARY_OPCODE_X1:
+				src_reg = get_SrcA_X1(bundle);
+				dbg_get_reg(src_reg, &addr, regs);
+				break;
+			}
+		}
+	} else if (get_Opcode_X1(bundle) == JUMP_OPCODE_X1) {
+		opcode = get_JumpOpcodeExtension_X1(bundle);
+
+		switch (opcode) {
+		case JAL_JUMP_OPCODE_X1:
+		case J_JUMP_OPCODE_X1:
+			jump_off = sign_extend(get_JumpOff_X1(bundle), 27);
+			addr = regs->pc +
+				(jump_off << TILEGX_LOG2_BUNDLE_SIZE_IN_BYTES);
+			break;
+		}
+	} else if (get_Opcode_X1(bundle) == BRANCH_OPCODE_X1) {
+		br_off = 0;
+		opcode = get_BrType_X1(bundle);
+
+		switch (opcode) {
+		case BEQZT_BRANCH_OPCODE_X1:
+		case BEQZ_BRANCH_OPCODE_X1:
+			if (get_SrcA_X1(bundle) == 0)
+				br_off = get_BrOff_X1(bundle);
+			break;
+		case BGEZT_BRANCH_OPCODE_X1:
+		case BGEZ_BRANCH_OPCODE_X1:
+			if (get_SrcA_X1(bundle) >= 0)
+				br_off = get_BrOff_X1(bundle);
+			break;
+		case BGTZT_BRANCH_OPCODE_X1:
+		case BGTZ_BRANCH_OPCODE_X1:
+			if (get_SrcA_X1(bundle) > 0)
+				br_off = get_BrOff_X1(bundle);
+			break;
+		case BLBCT_BRANCH_OPCODE_X1:
+		case BLBC_BRANCH_OPCODE_X1:
+			if (!(get_SrcA_X1(bundle) & 1))
+				br_off = get_BrOff_X1(bundle);
+			break;
+		case BLBST_BRANCH_OPCODE_X1:
+		case BLBS_BRANCH_OPCODE_X1:
+			if (get_SrcA_X1(bundle) & 1)
+				br_off = get_BrOff_X1(bundle);
+			break;
+		case BLEZT_BRANCH_OPCODE_X1:
+		case BLEZ_BRANCH_OPCODE_X1:
+			if (get_SrcA_X1(bundle) <= 0)
+				br_off = get_BrOff_X1(bundle);
+			break;
+		case BLTZT_BRANCH_OPCODE_X1:
+		case BLTZ_BRANCH_OPCODE_X1:
+			if (get_SrcA_X1(bundle) < 0)
+				br_off = get_BrOff_X1(bundle);
+			break;
+		case BNEZT_BRANCH_OPCODE_X1:
+		case BNEZ_BRANCH_OPCODE_X1:
+			if (get_SrcA_X1(bundle) != 0)
+				br_off = get_BrOff_X1(bundle);
+			break;
+		}
+
+		if (br_off != 0) {
+			br_off = sign_extend(br_off, 17);
+			addr = regs->pc +
+				(br_off << TILEGX_LOG2_BUNDLE_SIZE_IN_BYTES);
+		}
+	}
+
+	return addr;
+}
+
+/*
+ * Replace the next instruction after the current instruction with a
+ * breakpoint instruction.
+ */
+static void do_single_step(struct pt_regs *regs)
+{
+	unsigned long addr_wr;
+
+	/* Determine where the target instruction will send us to. */
+	stepped_addr = get_step_address(regs);
+	probe_kernel_read((char *)&stepped_instr, (char *)stepped_addr,
+			  BREAK_INSTR_SIZE);
+
+	addr_wr = writable_address(stepped_addr);
+	probe_kernel_write((char *)addr_wr, (char *)&singlestep_insn,
+			   BREAK_INSTR_SIZE);
+	smp_wmb();
+	flush_icache_range(stepped_addr, stepped_addr + BREAK_INSTR_SIZE);
+}
+
+static void undo_single_step(struct pt_regs *regs)
+{
+	unsigned long addr_wr;
+
+	if (stepped_instr == 0)
+		return;
+
+	addr_wr = writable_address(stepped_addr);
+	probe_kernel_write((char *)addr_wr, (char *)&stepped_instr,
+			   BREAK_INSTR_SIZE);
+	stepped_instr = 0;
+	smp_wmb();
+	flush_icache_range(stepped_addr, stepped_addr + BREAK_INSTR_SIZE);
+}
+
+/*
+ * Calls linux_debug_hook before the kernel dies. If KGDB is enabled,
+ * then try to fall into the debugger.
+ */
+static int
+kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr)
+{
+	int ret;
+	unsigned long flags;
+	struct die_args *args = (struct die_args *)ptr;
+	struct pt_regs *regs = args->regs;
+
+#ifdef CONFIG_KPROBES
+	/*
+	 * Return immediately if the kprobes fault notifier has set
+	 * DIE_PAGE_FAULT.
+	 */
+	if (cmd == DIE_PAGE_FAULT)
+		return NOTIFY_DONE;
+#endif /* CONFIG_KPROBES */
+
+	switch (cmd) {
+	case DIE_BREAK:
+	case DIE_COMPILED_BPT:
+		break;
+	case DIE_SSTEPBP:
+		local_irq_save(flags);
+		kgdb_handle_exception(0, SIGTRAP, 0, regs);
+		local_irq_restore(flags);
+		return NOTIFY_STOP;
+	default:
+		/* Userspace events, ignore. */
+		if (user_mode(regs))
+			return NOTIFY_DONE;
+	}
+
+	local_irq_save(flags);
+	ret = kgdb_handle_exception(args->trapnr, args->signr, args->err, regs);
+	local_irq_restore(flags);
+	if (ret)
+		return NOTIFY_DONE;
+
+	return NOTIFY_STOP;
+}
+
+static struct notifier_block kgdb_notifier = {
+	.notifier_call = kgdb_notify,
+};
+
+/*
+ * kgdb_arch_handle_exception - Handle architecture specific GDB packets.
+ * @vector: The error vector of the exception that happened.
+ * @signo: The signal number of the exception that happened.
+ * @err_code: The error code of the exception that happened.
+ * @remcom_in_buffer: The buffer of the packet we have read.
+ * @remcom_out_buffer: The buffer of %BUFMAX bytes to write a packet into.
+ * @regs: The &struct pt_regs of the current process.
+ *
+ * This function MUST handle the 'c' and 's' command packets,
+ * as well packets to set / remove a hardware breakpoint, if used.
+ * If there are additional packets which the hardware needs to handle,
+ * they are handled here. The code should return -1 if it wants to
+ * process more packets, and a %0 or %1 if it wants to exit from the
+ * kgdb callback.
+ */
+int kgdb_arch_handle_exception(int vector, int signo, int err_code,
+			       char *remcom_in_buffer, char *remcom_out_buffer,
+			       struct pt_regs *regs)
+{
+	char *ptr;
+	unsigned long address;
+
+	/* Undo any stepping we may have done. */
+	undo_single_step(regs);
+
+	switch (remcom_in_buffer[0]) {
+	case 'c':
+	case 's':
+	case 'D':
+	case 'k':
+		/*
+		 * Try to read optional parameter, pc unchanged if no parm.
+		 * If this was a compiled-in breakpoint, we need to move
+		 * to the next instruction or we will just breakpoint
+		 * over and over again.
+		 */
+		ptr = &remcom_in_buffer[1];
+		if (kgdb_hex2long(&ptr, &address))
+			regs->pc = address;
+		else if (*(unsigned long *)regs->pc == compiled_bpt)
+			regs->pc += BREAK_INSTR_SIZE;
+
+		if (remcom_in_buffer[0] == 's') {
+			do_single_step(regs);
+			kgdb_single_step = 1;
+			atomic_set(&kgdb_cpu_doing_single_step,
+				   raw_smp_processor_id());
+		} else
+			atomic_set(&kgdb_cpu_doing_single_step, -1);
+
+		return 0;
+	}
+
+	return -1; /* this means that we do not want to exit from the handler */
+}
+
+struct kgdb_arch arch_kgdb_ops;
+
+/*
+ * kgdb_arch_init - Perform any architecture specific initalization.
+ *
+ * This function will handle the initalization of any architecture
+ * specific callbacks.
+ */
+int kgdb_arch_init(void)
+{
+	tile_bundle_bits bundle = TILEGX_BPT_BUNDLE;
+
+	memcpy(arch_kgdb_ops.gdb_bpt_instr, &bundle, BREAK_INSTR_SIZE);
+	return register_die_notifier(&kgdb_notifier);
+}
+
+/*
+ * kgdb_arch_exit - Perform any architecture specific uninitalization.
+ *
+ * This function will handle the uninitalization of any architecture
+ * specific callbacks, for dynamic registration and unregistration.
+ */
+void kgdb_arch_exit(void)
+{
+	unregister_die_notifier(&kgdb_notifier);
+}
+
+int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt)
+{
+	int err;
+	unsigned long addr_wr = writable_address(bpt->bpt_addr);
+
+	if (addr_wr == 0)
+		return -1;
+
+	err = probe_kernel_read(bpt->saved_instr, (char *)bpt->bpt_addr,
+				BREAK_INSTR_SIZE);
+	if (err)
+		return err;
+
+	err = probe_kernel_write((char *)addr_wr, arch_kgdb_ops.gdb_bpt_instr,
+				 BREAK_INSTR_SIZE);
+	smp_wmb();
+	flush_icache_range((unsigned long)bpt->bpt_addr,
+			   (unsigned long)bpt->bpt_addr + BREAK_INSTR_SIZE);
+	return err;
+}
+
+int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt)
+{
+	int err;
+	unsigned long addr_wr = writable_address(bpt->bpt_addr);
+
+	if (addr_wr == 0)
+		return -1;
+
+	err = probe_kernel_write((char *)addr_wr, (char *)bpt->saved_instr,
+				 BREAK_INSTR_SIZE);
+	smp_wmb();
+	flush_icache_range((unsigned long)bpt->bpt_addr,
+			   (unsigned long)bpt->bpt_addr + BREAK_INSTR_SIZE);
+	return err;
+}
diff --git a/arch/tile/kernel/kprobes.c b/arch/tile/kernel/kprobes.c
new file mode 100644
index 0000000..27cdcac
--- /dev/null
+++ b/arch/tile/kernel/kprobes.c
@@ -0,0 +1,528 @@
+/*
+ * arch/tile/kernel/kprobes.c
+ * Kprobes on TILE-Gx
+ *
+ * Some portions copied from the MIPS version.
+ *
+ * Copyright (C) IBM Corporation, 2002, 2004
+ * Copyright 2006 Sony Corp.
+ * Copyright 2010 Cavium Networks
+ *
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/kprobes.h>
+#include <linux/kdebug.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <asm/cacheflush.h>
+
+#include <arch/opcode.h>
+
+DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
+DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
+
+tile_bundle_bits breakpoint_insn = TILEGX_BPT_BUNDLE;
+tile_bundle_bits breakpoint2_insn = TILEGX_BPT_BUNDLE | DIE_SSTEPBP;
+
+/*
+ * Check whether instruction is branch or jump, or if executing it
+ * has different results depending on where it is executed (e.g. lnk).
+ */
+static int __kprobes insn_has_control(kprobe_opcode_t insn)
+{
+	if (get_Mode(insn) != 0) {   /* Y-format bundle */
+		if (get_Opcode_Y1(insn) != RRR_1_OPCODE_Y1 ||
+		    get_RRROpcodeExtension_Y1(insn) != UNARY_RRR_1_OPCODE_Y1)
+			return 0;
+
+		switch (get_UnaryOpcodeExtension_Y1(insn)) {
+		case JALRP_UNARY_OPCODE_Y1:
+		case JALR_UNARY_OPCODE_Y1:
+		case JRP_UNARY_OPCODE_Y1:
+		case JR_UNARY_OPCODE_Y1:
+		case LNK_UNARY_OPCODE_Y1:
+			return 1;
+		default:
+			return 0;
+		}
+	}
+
+	switch (get_Opcode_X1(insn)) {
+	case BRANCH_OPCODE_X1:	/* branch instructions */
+	case JUMP_OPCODE_X1:	/* jump instructions: j and jal */
+		return 1;
+
+	case RRR_0_OPCODE_X1:   /* other jump instructions */
+		if (get_RRROpcodeExtension_X1(insn) != UNARY_RRR_0_OPCODE_X1)
+			return 0;
+		switch (get_UnaryOpcodeExtension_X1(insn)) {
+		case JALRP_UNARY_OPCODE_X1:
+		case JALR_UNARY_OPCODE_X1:
+		case JRP_UNARY_OPCODE_X1:
+		case JR_UNARY_OPCODE_X1:
+		case LNK_UNARY_OPCODE_X1:
+			return 1;
+		default:
+			return 0;
+		}
+	default:
+		return 0;
+	}
+}
+
+int __kprobes arch_prepare_kprobe(struct kprobe *p)
+{
+	unsigned long addr = (unsigned long)p->addr;
+
+	if (addr & (sizeof(kprobe_opcode_t) - 1))
+		return -EINVAL;
+
+	if (insn_has_control(*p->addr)) {
+		pr_notice("Kprobes for control instructions are not "
+			  "supported\n");
+		return -EINVAL;
+	}
+
+	/* insn: must be on special executable page on tile. */
+	p->ainsn.insn = get_insn_slot();
+	if (!p->ainsn.insn)
+		return -ENOMEM;
+
+	/*
+	 * In the kprobe->ainsn.insn[] array we store the original
+	 * instruction at index zero and a break trap instruction at
+	 * index one.
+	 */
+	memcpy(&p->ainsn.insn[0], p->addr, sizeof(kprobe_opcode_t));
+	p->ainsn.insn[1] = breakpoint2_insn;
+	p->opcode = *p->addr;
+
+	return 0;
+}
+
+void __kprobes arch_arm_kprobe(struct kprobe *p)
+{
+	unsigned long addr_wr;
+
+	/* Operate on writable kernel text mapping. */
+	addr_wr = (unsigned long)p->addr - MEM_SV_START + PAGE_OFFSET;
+
+	if (probe_kernel_write((void *)addr_wr, &breakpoint_insn,
+		sizeof(breakpoint_insn)))
+		pr_err("%s: failed to enable kprobe\n", __func__);
+
+	smp_wmb();
+	flush_insn_slot(p);
+}
+
+void __kprobes arch_disarm_kprobe(struct kprobe *kp)
+{
+	unsigned long addr_wr;
+
+	/* Operate on writable kernel text mapping. */
+	addr_wr = (unsigned long)kp->addr - MEM_SV_START + PAGE_OFFSET;
+
+	if (probe_kernel_write((void *)addr_wr, &kp->opcode,
+		sizeof(kp->opcode)))
+		pr_err("%s: failed to enable kprobe\n", __func__);
+
+	smp_wmb();
+	flush_insn_slot(kp);
+}
+
+void __kprobes arch_remove_kprobe(struct kprobe *p)
+{
+	if (p->ainsn.insn) {
+		free_insn_slot(p->ainsn.insn, 0);
+		p->ainsn.insn = NULL;
+	}
+}
+
+static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+	kcb->prev_kprobe.kp = kprobe_running();
+	kcb->prev_kprobe.status = kcb->kprobe_status;
+	kcb->prev_kprobe.saved_pc = kcb->kprobe_saved_pc;
+}
+
+static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+	__this_cpu_write(current_kprobe, kcb->prev_kprobe.kp);
+	kcb->kprobe_status = kcb->prev_kprobe.status;
+	kcb->kprobe_saved_pc = kcb->prev_kprobe.saved_pc;
+}
+
+static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
+			struct kprobe_ctlblk *kcb)
+{
+	__this_cpu_write(current_kprobe, p);
+	kcb->kprobe_saved_pc = regs->pc;
+}
+
+static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
+{
+	/* Single step inline if the instruction is a break. */
+	if (p->opcode == breakpoint_insn ||
+	    p->opcode == breakpoint2_insn)
+		regs->pc = (unsigned long)p->addr;
+	else
+		regs->pc = (unsigned long)&p->ainsn.insn[0];
+}
+
+static int __kprobes kprobe_handler(struct pt_regs *regs)
+{
+	struct kprobe *p;
+	int ret = 0;
+	kprobe_opcode_t *addr;
+	struct kprobe_ctlblk *kcb;
+
+	addr = (kprobe_opcode_t *)regs->pc;
+
+	/*
+	 * We don't want to be preempted for the entire
+	 * duration of kprobe processing.
+	 */
+	preempt_disable();
+	kcb = get_kprobe_ctlblk();
+
+	/* Check we're not actually recursing. */
+	if (kprobe_running()) {
+		p = get_kprobe(addr);
+		if (p) {
+			if (kcb->kprobe_status == KPROBE_HIT_SS &&
+			    p->ainsn.insn[0] == breakpoint_insn) {
+				goto no_kprobe;
+			}
+			/*
+			 * We have reentered the kprobe_handler(), since
+			 * another probe was hit while within the handler.
+			 * We here save the original kprobes variables and
+			 * just single step on the instruction of the new probe
+			 * without calling any user handlers.
+			 */
+			save_previous_kprobe(kcb);
+			set_current_kprobe(p, regs, kcb);
+			kprobes_inc_nmissed_count(p);
+			prepare_singlestep(p, regs);
+			kcb->kprobe_status = KPROBE_REENTER;
+			return 1;
+		} else {
+			if (*addr != breakpoint_insn) {
+				/*
+				 * The breakpoint instruction was removed by
+				 * another cpu right after we hit, no further
+				 * handling of this interrupt is appropriate.
+				 */
+				ret = 1;
+				goto no_kprobe;
+			}
+			p = __this_cpu_read(current_kprobe);
+			if (p->break_handler && p->break_handler(p, regs))
+				goto ss_probe;
+		}
+		goto no_kprobe;
+	}
+
+	p = get_kprobe(addr);
+	if (!p) {
+		if (*addr != breakpoint_insn) {
+			/*
+			 * The breakpoint instruction was removed right
+			 * after we hit it.  Another cpu has removed
+			 * either a probepoint or a debugger breakpoint
+			 * at this address.  In either case, no further
+			 * handling of this interrupt is appropriate.
+			 */
+			ret = 1;
+		}
+		/* Not one of ours: let kernel handle it. */
+		goto no_kprobe;
+	}
+
+	set_current_kprobe(p, regs, kcb);
+	kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+
+	if (p->pre_handler && p->pre_handler(p, regs)) {
+		/* Handler has already set things up, so skip ss setup. */
+		return 1;
+	}
+
+ss_probe:
+	prepare_singlestep(p, regs);
+	kcb->kprobe_status = KPROBE_HIT_SS;
+	return 1;
+
+no_kprobe:
+	preempt_enable_no_resched();
+	return ret;
+}
+
+/*
+ * Called after single-stepping.  p->addr is the address of the
+ * instruction that has been replaced by the breakpoint. To avoid the
+ * SMP problems that can occur when we temporarily put back the
+ * original opcode to single-step, we single-stepped a copy of the
+ * instruction.  The address of this copy is p->ainsn.insn.
+ *
+ * This function prepares to return from the post-single-step
+ * breakpoint trap.
+ */
+static void __kprobes resume_execution(struct kprobe *p,
+				       struct pt_regs *regs,
+				       struct kprobe_ctlblk *kcb)
+{
+	unsigned long orig_pc = kcb->kprobe_saved_pc;
+	regs->pc = orig_pc + 8;
+}
+
+static inline int post_kprobe_handler(struct pt_regs *regs)
+{
+	struct kprobe *cur = kprobe_running();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	if (!cur)
+		return 0;
+
+	if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
+		kcb->kprobe_status = KPROBE_HIT_SSDONE;
+		cur->post_handler(cur, regs, 0);
+	}
+
+	resume_execution(cur, regs, kcb);
+
+	/* Restore back the original saved kprobes variables and continue. */
+	if (kcb->kprobe_status == KPROBE_REENTER) {
+		restore_previous_kprobe(kcb);
+		goto out;
+	}
+	reset_current_kprobe();
+out:
+	preempt_enable_no_resched();
+
+	return 1;
+}
+
+static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+{
+	struct kprobe *cur = kprobe_running();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
+		return 1;
+
+	if (kcb->kprobe_status & KPROBE_HIT_SS) {
+		/*
+		 * We are here because the instruction being single
+		 * stepped caused a page fault. We reset the current
+		 * kprobe and the ip points back to the probe address
+		 * and allow the page fault handler to continue as a
+		 * normal page fault.
+		 */
+		resume_execution(cur, regs, kcb);
+		reset_current_kprobe();
+		preempt_enable_no_resched();
+	}
+	return 0;
+}
+
+/*
+ * Wrapper routine for handling exceptions.
+ */
+int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
+				       unsigned long val, void *data)
+{
+	struct die_args *args = (struct die_args *)data;
+	int ret = NOTIFY_DONE;
+
+	switch (val) {
+	case DIE_BREAK:
+		if (kprobe_handler(args->regs))
+			ret = NOTIFY_STOP;
+		break;
+	case DIE_SSTEPBP:
+		if (post_kprobe_handler(args->regs))
+			ret = NOTIFY_STOP;
+		break;
+	case DIE_PAGE_FAULT:
+		/* kprobe_running() needs smp_processor_id(). */
+		preempt_disable();
+
+		if (kprobe_running()
+		    && kprobe_fault_handler(args->regs, args->trapnr))
+			ret = NOTIFY_STOP;
+		preempt_enable();
+		break;
+	default:
+		break;
+	}
+	return ret;
+}
+
+int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+	struct jprobe *jp = container_of(p, struct jprobe, kp);
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	kcb->jprobe_saved_regs = *regs;
+	kcb->jprobe_saved_sp = regs->sp;
+
+	memcpy(kcb->jprobes_stack, (void *)kcb->jprobe_saved_sp,
+	       MIN_JPROBES_STACK_SIZE(kcb->jprobe_saved_sp));
+
+	regs->pc = (unsigned long)(jp->entry);
+
+	return 1;
+}
+
+/* Defined in the inline asm below. */
+void jprobe_return_end(void);
+
+void __kprobes jprobe_return(void)
+{
+	asm volatile(
+		"bpt\n\t"
+		".globl jprobe_return_end\n"
+		"jprobe_return_end:\n");
+}
+
+int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
+{
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	if (regs->pc >= (unsigned long)jprobe_return &&
+	    regs->pc <= (unsigned long)jprobe_return_end) {
+		*regs = kcb->jprobe_saved_regs;
+		memcpy((void *)kcb->jprobe_saved_sp, kcb->jprobes_stack,
+		       MIN_JPROBES_STACK_SIZE(kcb->jprobe_saved_sp));
+		preempt_enable_no_resched();
+
+		return 1;
+	}
+	return 0;
+}
+
+/*
+ * Function return probe trampoline:
+ * - init_kprobes() establishes a probepoint here
+ * - When the probed function returns, this probe causes the
+ *   handlers to fire
+ */
+static void __used kretprobe_trampoline_holder(void)
+{
+	asm volatile(
+		"nop\n\t"
+		".global kretprobe_trampoline\n"
+		"kretprobe_trampoline:\n\t"
+		"nop\n\t"
+		: : : "memory");
+}
+
+void kretprobe_trampoline(void);
+
+void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
+				      struct pt_regs *regs)
+{
+	ri->ret_addr = (kprobe_opcode_t *) regs->lr;
+
+	/* Replace the return addr with trampoline addr */
+	regs->lr = (unsigned long)kretprobe_trampoline;
+}
+
+/*
+ * Called when the probe at kretprobe trampoline is hit.
+ */
+static int __kprobes trampoline_probe_handler(struct kprobe *p,
+						struct pt_regs *regs)
+{
+	struct kretprobe_instance *ri = NULL;
+	struct hlist_head *head, empty_rp;
+	struct hlist_node *tmp;
+	unsigned long flags, orig_ret_address = 0;
+	unsigned long trampoline_address = (unsigned long)kretprobe_trampoline;
+
+	INIT_HLIST_HEAD(&empty_rp);
+	kretprobe_hash_lock(current, &head, &flags);
+
+	/*
+	 * It is possible to have multiple instances associated with a given
+	 * task either because multiple functions in the call path have
+	 * a return probe installed on them, and/or more than one return
+	 * return probe was registered for a target function.
+	 *
+	 * We can handle this because:
+	 *     - instances are always inserted at the head of the list
+	 *     - when multiple return probes are registered for the same
+	 *       function, the first instance's ret_addr will point to the
+	 *       real return address, and all the rest will point to
+	 *       kretprobe_trampoline
+	 */
+	hlist_for_each_entry_safe(ri, tmp, head, hlist) {
+		if (ri->task != current)
+			/* another task is sharing our hash bucket */
+			continue;
+
+		if (ri->rp && ri->rp->handler)
+			ri->rp->handler(ri, regs);
+
+		orig_ret_address = (unsigned long)ri->ret_addr;
+		recycle_rp_inst(ri, &empty_rp);
+
+		if (orig_ret_address != trampoline_address) {
+			/*
+			 * This is the real return address. Any other
+			 * instances associated with this task are for
+			 * other calls deeper on the call stack
+			 */
+			break;
+		}
+	}
+
+	kretprobe_assert(ri, orig_ret_address, trampoline_address);
+	instruction_pointer(regs) = orig_ret_address;
+
+	reset_current_kprobe();
+	kretprobe_hash_unlock(current, &flags);
+	preempt_enable_no_resched();
+
+	hlist_for_each_entry_safe(ri, tmp, &empty_rp, hlist) {
+		hlist_del(&ri->hlist);
+		kfree(ri);
+	}
+	/*
+	 * By returning a non-zero value, we are telling
+	 * kprobe_handler() that we don't want the post_handler
+	 * to run (and have re-enabled preemption)
+	 */
+	return 1;
+}
+
+int __kprobes arch_trampoline_kprobe(struct kprobe *p)
+{
+	if (p->addr == (kprobe_opcode_t *)kretprobe_trampoline)
+		return 1;
+
+	return 0;
+}
+
+static struct kprobe trampoline_p = {
+	.addr = (kprobe_opcode_t *)kretprobe_trampoline,
+	.pre_handler = trampoline_probe_handler
+};
+
+int __init arch_init_kprobes(void)
+{
+	register_kprobe(&trampoline_p);
+	return 0;
+}
diff --git a/arch/tile/kernel/mcount_64.S b/arch/tile/kernel/mcount_64.S
new file mode 100644
index 0000000..70d7bb0
--- /dev/null
+++ b/arch/tile/kernel/mcount_64.S
@@ -0,0 +1,224 @@
+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * TILE-Gx specific __mcount support
+ */
+
+#include <linux/linkage.h>
+#include <asm/ftrace.h>
+
+#define REGSIZE 8
+
+	.text
+	.global __mcount
+
+	.macro	MCOUNT_SAVE_REGS
+	addli	sp, sp, -REGSIZE
+	{
+	 st     sp, lr
+	 addli	r29, sp, - (12 * REGSIZE)
+	}
+	{
+	 addli	sp, sp, - (13 * REGSIZE)
+	 st     r29, sp
+	}
+	addli	r29, r29, REGSIZE
+	{ st	r29, r0; addli	r29, r29, REGSIZE }
+	{ st	r29, r1; addli	r29, r29, REGSIZE }
+	{ st	r29, r2; addli	r29, r29, REGSIZE }
+	{ st	r29, r3; addli	r29, r29, REGSIZE }
+	{ st	r29, r4; addli	r29, r29, REGSIZE }
+	{ st	r29, r5; addli	r29, r29, REGSIZE }
+	{ st	r29, r6; addli	r29, r29, REGSIZE }
+	{ st	r29, r7; addli	r29, r29, REGSIZE }
+	{ st	r29, r8; addli	r29, r29, REGSIZE }
+	{ st	r29, r9; addli	r29, r29, REGSIZE }
+	{ st	r29, r10; addli	r29, r29, REGSIZE }
+	.endm
+
+	.macro	MCOUNT_RESTORE_REGS
+	addli	r29, sp, (2 * REGSIZE)
+	{ ld	r0, r29; addli	r29, r29, REGSIZE }
+	{ ld	r1, r29; addli	r29, r29, REGSIZE }
+	{ ld	r2, r29; addli	r29, r29, REGSIZE }
+	{ ld	r3, r29; addli	r29, r29, REGSIZE }
+	{ ld	r4, r29; addli	r29, r29, REGSIZE }
+	{ ld	r5, r29; addli	r29, r29, REGSIZE }
+	{ ld	r6, r29; addli	r29, r29, REGSIZE }
+	{ ld	r7, r29; addli	r29, r29, REGSIZE }
+	{ ld	r8, r29; addli	r29, r29, REGSIZE }
+	{ ld	r9, r29; addli	r29, r29, REGSIZE }
+	{ ld	r10, r29; addli	lr, sp, (13 * REGSIZE) }
+	{ ld	lr, lr;  addli	sp, sp, (14 * REGSIZE) }
+	.endm
+
+	.macro  RETURN_BACK
+	{ move	r12, lr; move	lr, r10 }
+	jrp	r12
+	.endm
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+	.align	64
+STD_ENTRY(__mcount)
+__mcount:
+	j	ftrace_stub
+STD_ENDPROC(__mcount)
+
+	.align	64
+STD_ENTRY(ftrace_caller)
+	moveli	r11, hw2_last(function_trace_stop)
+	{ shl16insli	r11, r11, hw1(function_trace_stop); move r12, lr }
+	{ shl16insli	r11, r11, hw0(function_trace_stop); move lr, r10 }
+	ld	r11, r11
+	beqz	r11, 1f
+	jrp	r12
+
+1:
+	{ move	r10, lr; move	lr, r12 }
+	MCOUNT_SAVE_REGS
+
+	/* arg1: self return address */
+	/* arg2: parent's return address */
+	{ move	r0, lr; move	r1, r10 }
+
+	.global	ftrace_call
+ftrace_call:
+	/*
+	 * a placeholder for the call to a real tracing function, i.e.
+	 * ftrace_trace_function()
+	 */
+	nop
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	.global	ftrace_graph_call
+ftrace_graph_call:
+	/*
+	 * a placeholder for the call to a real tracing function, i.e.
+	 * ftrace_graph_caller()
+	 */
+	nop
+#endif
+	MCOUNT_RESTORE_REGS
+	.global	ftrace_stub
+ftrace_stub:
+	RETURN_BACK
+STD_ENDPROC(ftrace_caller)
+
+#else /* ! CONFIG_DYNAMIC_FTRACE */
+
+	.align	64
+STD_ENTRY(__mcount)
+	moveli	r11, hw2_last(function_trace_stop)
+	{ shl16insli	r11, r11, hw1(function_trace_stop); move r12, lr }
+	{ shl16insli	r11, r11, hw0(function_trace_stop); move lr, r10 }
+	ld	r11, r11
+	beqz	r11, 1f
+	jrp	r12
+
+1:
+	{ move	r10, lr; move	lr, r12 }
+	{
+	 moveli	r11, hw2_last(ftrace_trace_function)
+	 moveli	r13, hw2_last(ftrace_stub)
+	}
+	{
+	 shl16insli	r11, r11, hw1(ftrace_trace_function)
+	 shl16insli	r13, r13, hw1(ftrace_stub)
+	}
+	{
+	 shl16insli	r11, r11, hw0(ftrace_trace_function)
+	 shl16insli	r13, r13, hw0(ftrace_stub)
+	}
+
+	ld	r11, r11
+	sub	r14, r13, r11
+	bnez	r14, static_trace
+
+#ifdef	CONFIG_FUNCTION_GRAPH_TRACER
+	moveli	r15, hw2_last(ftrace_graph_return)
+	shl16insli	r15, r15, hw1(ftrace_graph_return)
+	shl16insli	r15, r15, hw0(ftrace_graph_return)
+	ld	r15, r15
+	sub	r15, r15, r13
+	bnez	r15, ftrace_graph_caller
+
+	{
+	 moveli	r16, hw2_last(ftrace_graph_entry)
+	 moveli	r17, hw2_last(ftrace_graph_entry_stub)
+	}
+	{
+	 shl16insli	r16, r16, hw1(ftrace_graph_entry)
+	 shl16insli	r17, r17, hw1(ftrace_graph_entry_stub)
+	}
+	{
+	 shl16insli	r16, r16, hw0(ftrace_graph_entry)
+	 shl16insli	r17, r17, hw0(ftrace_graph_entry_stub)
+	}
+	ld	r16, r16
+	sub	r17, r16, r17
+	bnez	r17, ftrace_graph_caller
+
+#endif
+	RETURN_BACK
+
+static_trace:
+	MCOUNT_SAVE_REGS
+
+	/* arg1: self return address */
+	/* arg2: parent's return address */
+	{ move	r0, lr; move	r1, r10 }
+
+	/* call ftrace_trace_function() */
+	jalr	r11
+
+	MCOUNT_RESTORE_REGS
+
+	.global ftrace_stub
+ftrace_stub:
+	RETURN_BACK
+STD_ENDPROC(__mcount)
+
+#endif	/* ! CONFIG_DYNAMIC_FTRACE */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+
+STD_ENTRY(ftrace_graph_caller)
+ftrace_graph_caller:
+#ifndef CONFIG_DYNAMIC_FTRACE
+	MCOUNT_SAVE_REGS
+#endif
+
+	/* arg1: Get the location of the parent's return address */
+	addi	r0, sp, 12 * REGSIZE
+	/* arg2: Get self return address */
+	move	r1, lr
+
+	jal prepare_ftrace_return
+
+	MCOUNT_RESTORE_REGS
+	RETURN_BACK
+STD_ENDPROC(ftrace_graph_caller)
+
+	.global return_to_handler
+return_to_handler:
+	MCOUNT_SAVE_REGS
+
+	jal	ftrace_return_to_handler
+	/* restore the real parent address */
+	move	r11, r0
+
+	MCOUNT_RESTORE_REGS
+	jr	r11
+
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
diff --git a/arch/tile/kernel/pci-dma.c b/arch/tile/kernel/pci-dma.c
index b9fe80e..09b5870 100644
--- a/arch/tile/kernel/pci-dma.c
+++ b/arch/tile/kernel/pci-dma.c
@@ -36,8 +36,9 @@ static void *tile_dma_alloc_coherent(struct device *dev, size_t size,
 				     dma_addr_t *dma_handle, gfp_t gfp,
 				     struct dma_attrs *attrs)
 {
-	u64 dma_mask = dev->coherent_dma_mask ?: DMA_BIT_MASK(32);
-	int node = dev_to_node(dev);
+	u64 dma_mask = (dev && dev->coherent_dma_mask) ?
+		dev->coherent_dma_mask : DMA_BIT_MASK(32);
+	int node = dev ? dev_to_node(dev) : 0;
 	int order = get_order(size);
 	struct page *pg;
 	dma_addr_t addr;
@@ -256,7 +257,7 @@ static void tile_dma_unmap_page(struct device *dev, dma_addr_t dma_address,
 	BUG_ON(!valid_dma_direction(direction));
 
 	__dma_complete_page(pfn_to_page(PFN_DOWN(dma_address)),
-			    dma_address & PAGE_OFFSET, size, direction);
+			    dma_address & (PAGE_SIZE - 1), size, direction);
 }
 
 static void tile_dma_sync_single_for_cpu(struct device *dev,
@@ -357,7 +358,7 @@ static void *tile_pci_dma_alloc_coherent(struct device *dev, size_t size,
 
 	addr = page_to_phys(pg);
 
-	*dma_handle = phys_to_dma(dev, addr);
+	*dma_handle = addr + get_dma_offset(dev);
 
 	return page_address(pg);
 }
@@ -387,7 +388,7 @@ static int tile_pci_dma_map_sg(struct device *dev, struct scatterlist *sglist,
 		sg->dma_address = sg_phys(sg);
 		__dma_prep_pa_range(sg->dma_address, sg->length, direction);
 
-		sg->dma_address = phys_to_dma(dev, sg->dma_address);
+		sg->dma_address = sg->dma_address + get_dma_offset(dev);
 #ifdef CONFIG_NEED_SG_DMA_LENGTH
 		sg->dma_length = sg->length;
 #endif
@@ -422,7 +423,7 @@ static dma_addr_t tile_pci_dma_map_page(struct device *dev, struct page *page,
 	BUG_ON(offset + size > PAGE_SIZE);
 	__dma_prep_page(page, offset, size, direction);
 
-	return phys_to_dma(dev, page_to_pa(page) + offset);
+	return page_to_pa(page) + offset + get_dma_offset(dev);
 }
 
 static void tile_pci_dma_unmap_page(struct device *dev, dma_addr_t dma_address,
@@ -432,10 +433,10 @@ static void tile_pci_dma_unmap_page(struct device *dev, dma_addr_t dma_address,
 {
 	BUG_ON(!valid_dma_direction(direction));
 
-	dma_address = dma_to_phys(dev, dma_address);
+	dma_address -= get_dma_offset(dev);
 
 	__dma_complete_page(pfn_to_page(PFN_DOWN(dma_address)),
-			    dma_address & PAGE_OFFSET, size, direction);
+			    dma_address & (PAGE_SIZE - 1), size, direction);
 }
 
 static void tile_pci_dma_sync_single_for_cpu(struct device *dev,
@@ -445,7 +446,7 @@ static void tile_pci_dma_sync_single_for_cpu(struct device *dev,
 {
 	BUG_ON(!valid_dma_direction(direction));
 
-	dma_handle = dma_to_phys(dev, dma_handle);
+	dma_handle -= get_dma_offset(dev);
 
 	__dma_complete_pa_range(dma_handle, size, direction);
 }
@@ -456,7 +457,7 @@ static void tile_pci_dma_sync_single_for_device(struct device *dev,
 						enum dma_data_direction
 						direction)
 {
-	dma_handle = dma_to_phys(dev, dma_handle);
+	dma_handle -= get_dma_offset(dev);
 
 	__dma_prep_pa_range(dma_handle, size, direction);
 }
@@ -558,22 +559,47 @@ static struct dma_map_ops pci_swiotlb_dma_ops = {
 	.mapping_error = swiotlb_dma_mapping_error,
 };
 
+static struct dma_map_ops pci_hybrid_dma_ops = {
+	.alloc = tile_swiotlb_alloc_coherent,
+	.free = tile_swiotlb_free_coherent,
+	.map_page = tile_pci_dma_map_page,
+	.unmap_page = tile_pci_dma_unmap_page,
+	.map_sg = tile_pci_dma_map_sg,
+	.unmap_sg = tile_pci_dma_unmap_sg,
+	.sync_single_for_cpu = tile_pci_dma_sync_single_for_cpu,
+	.sync_single_for_device = tile_pci_dma_sync_single_for_device,
+	.sync_sg_for_cpu = tile_pci_dma_sync_sg_for_cpu,
+	.sync_sg_for_device = tile_pci_dma_sync_sg_for_device,
+	.mapping_error = tile_pci_dma_mapping_error,
+	.dma_supported = tile_pci_dma_supported
+};
+
 struct dma_map_ops *gx_legacy_pci_dma_map_ops = &pci_swiotlb_dma_ops;
+struct dma_map_ops *gx_hybrid_pci_dma_map_ops = &pci_hybrid_dma_ops;
 #else
 struct dma_map_ops *gx_legacy_pci_dma_map_ops;
+struct dma_map_ops *gx_hybrid_pci_dma_map_ops;
 #endif
 EXPORT_SYMBOL(gx_legacy_pci_dma_map_ops);
+EXPORT_SYMBOL(gx_hybrid_pci_dma_map_ops);
 
 #ifdef CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK
 int dma_set_coherent_mask(struct device *dev, u64 mask)
 {
 	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
-	/* Handle legacy PCI devices with limited memory addressability. */
-	if (((dma_ops == gx_pci_dma_map_ops) ||
-	    (dma_ops == gx_legacy_pci_dma_map_ops)) &&
-	    (mask <= DMA_BIT_MASK(32))) {
-		if (mask > dev->archdata.max_direct_dma_addr)
+	/*
+	 * For PCI devices with 64-bit DMA addressing capability, promote
+	 * the dma_ops to full capability for both streams and consistent
+	 * memory access. For 32-bit capable devices, limit the consistent 
+	 * memory DMA range to max_direct_dma_addr.
+	 */
+	if (dma_ops == gx_pci_dma_map_ops ||
+	    dma_ops == gx_hybrid_pci_dma_map_ops ||
+	    dma_ops == gx_legacy_pci_dma_map_ops) {
+		if (mask == DMA_BIT_MASK(64))
+			set_dma_ops(dev, gx_pci_dma_map_ops);
+		else if (mask > dev->archdata.max_direct_dma_addr)
 			mask = dev->archdata.max_direct_dma_addr;
 	}
 
@@ -584,3 +610,21 @@ int dma_set_coherent_mask(struct device *dev, u64 mask)
 }
 EXPORT_SYMBOL(dma_set_coherent_mask);
 #endif
+
+#ifdef ARCH_HAS_DMA_GET_REQUIRED_MASK
+/*
+ * The generic dma_get_required_mask() uses the highest physical address
+ * (max_pfn) to provide the hint to the PCI drivers regarding 32-bit or
+ * 64-bit DMA configuration. Since TILEGx has I/O TLB/MMU, allowing the
+ * DMAs to use the full 64-bit PCI address space and not limited by
+ * the physical memory space, we always let the PCI devices use
+ * 64-bit DMA if they have that capability, by returning the 64-bit
+ * DMA mask here. The device driver has the option to use 32-bit DMA if
+ * the device is not capable of 64-bit DMA.
+ */
+u64 dma_get_required_mask(struct device *dev)
+{
+	return DMA_BIT_MASK(64);
+}
+EXPORT_SYMBOL_GPL(dma_get_required_mask);
+#endif
diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c
index 67237d3..b7180e6 100644
--- a/arch/tile/kernel/pci.c
+++ b/arch/tile/kernel/pci.c
@@ -20,7 +20,6 @@
 #include <linux/capability.h>
 #include <linux/sched.h>
 #include <linux/errno.h>
-#include <linux/bootmem.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/uaccess.h>
@@ -52,6 +51,8 @@
  *
  */
 
+static int pci_probe = 1;
+
 /*
  * This flag tells if the platform is TILEmpower that needs
  * special configuration for the PLX switch chip.
@@ -144,6 +145,11 @@ int __init tile_pci_init(void)
 {
 	int i;
 
+	if (!pci_probe) {
+		pr_info("PCI: disabled by boot argument\n");
+		return 0;
+	}
+
 	pr_info("PCI: Searching for controllers...\n");
 
 	/* Re-init number of PCIe controllers to support hot-plug feature. */
@@ -192,7 +198,6 @@ int __init tile_pci_init(void)
 			controller->hv_cfg_fd[0] = hv_cfg_fd0;
 			controller->hv_cfg_fd[1] = hv_cfg_fd1;
 			controller->hv_mem_fd = hv_mem_fd;
-			controller->first_busno = 0;
 			controller->last_busno = 0xff;
 			controller->ops = &tile_cfg_ops;
 
@@ -283,7 +288,7 @@ int __init pcibios_init(void)
 	 * known to require at least 20ms here, but we use a more
 	 * conservative value.
 	 */
-	mdelay(250);
+	msleep(250);
 
 	/* Scan all of the recorded PCI controllers.  */
 	for (i = 0; i < TILE_NUM_PCIE; i++) {
@@ -304,18 +309,10 @@ int __init pcibios_init(void)
 
 			pr_info("PCI: initializing controller #%d\n", i);
 
-			/*
-			 * This comes from the generic Linux PCI driver.
-			 *
-			 * It reads the PCI tree for this bus into the Linux
-			 * data structures.
-			 *
-			 * This is inlined in linux/pci.h and calls into
-			 * pci_scan_bus_parented() in probe.c.
-			 */
 			pci_add_resource(&resources, &ioport_resource);
 			pci_add_resource(&resources, &iomem_resource);
-			bus = pci_scan_root_bus(NULL, 0, controller->ops, controller, &resources);
+			bus = pci_scan_root_bus(NULL, 0, controller->ops,
+						controller, &resources);
 			controller->root_bus = bus;
 			controller->last_busno = bus->busn_res.end;
 		}
@@ -388,6 +385,16 @@ void pcibios_set_master(struct pci_dev *dev)
 	/* No special bus mastering setup handling. */
 }
 
+/* Process any "pci=" kernel boot arguments. */
+char *__init pcibios_setup(char *str)
+{
+	if (!strcmp(str, "off")) {
+		pci_probe = 0;
+		return NULL;
+	}
+	return str;
+}
+
 /*
  * Enable memory and/or address decoding, as appropriate, for the
  * device described by the 'dev' struct.
diff --git a/arch/tile/kernel/pci_gx.c b/arch/tile/kernel/pci_gx.c
index 1142563..a97a645 100644
--- a/arch/tile/kernel/pci_gx.c
+++ b/arch/tile/kernel/pci_gx.c
@@ -69,19 +69,32 @@ static int pcie_rc[TILEGX_NUM_TRIO][TILEGX_TRIO_PCIES];
  * a HW PCIe link-training bug. The exact delay is specified with
  * a kernel boot argument in the form of "pcie_rc_delay=T,P,S",
  * where T is the TRIO instance number, P is the port number and S is
- * the delay in seconds. If the delay is not provided, the value
- * will be DEFAULT_RC_DELAY.
+ * the delay in seconds. If the argument is specified, but the delay is
+ * not provided, the value will be DEFAULT_RC_DELAY.
  */
 static int rc_delay[TILEGX_NUM_TRIO][TILEGX_TRIO_PCIES];
 
 /* Default number of seconds that the PCIe RC port probe can be delayed. */
 #define DEFAULT_RC_DELAY	10
 
-/* Max number of seconds that the PCIe RC port probe can be delayed. */
-#define MAX_RC_DELAY		20
+/* The PCI I/O space size in each PCI domain. */
+#define IO_SPACE_SIZE		0x10000
+
+/* Provide shorter versions of some very long constant names. */
+#define AUTO_CONFIG_RC	\
+	TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_RC
+#define AUTO_CONFIG_RC_G1	\
+	TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_RC_G1
+#define AUTO_CONFIG_EP	\
+	TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_ENDPOINT
+#define AUTO_CONFIG_EP_G1	\
+	TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_ENDPOINT_G1
 
 /* Array of the PCIe ports configuration info obtained from the BIB. */
-struct pcie_port_property pcie_ports[TILEGX_NUM_TRIO][TILEGX_TRIO_PCIES];
+struct pcie_trio_ports_property pcie_ports[TILEGX_NUM_TRIO];
+
+/* Number of configured TRIO instances. */
+int num_trio_shims;
 
 /* All drivers share the TRIO contexts defined here. */
 gxio_trio_context_t trio_contexts[TILEGX_NUM_TRIO];
@@ -89,24 +102,21 @@ gxio_trio_context_t trio_contexts[TILEGX_NUM_TRIO];
 /* Pointer to an array of PCIe RC controllers. */
 struct pci_controller pci_controllers[TILEGX_NUM_TRIO * TILEGX_TRIO_PCIES];
 int num_rc_controllers;
-static int num_ep_controllers;
 
 static struct pci_ops tile_cfg_ops;
 
 /* Mask of CPUs that should receive PCIe interrupts. */
 static struct cpumask intr_cpus_map;
 
-/*
- * We don't need to worry about the alignment of resources.
- */
+/* We don't need to worry about the alignment of resources. */
 resource_size_t pcibios_align_resource(void *data, const struct resource *res,
-				resource_size_t size, resource_size_t align)
+				       resource_size_t size,
+				       resource_size_t align)
 {
 	return res->start;
 }
 EXPORT_SYMBOL(pcibios_align_resource);
 
-
 /*
  * Pick a CPU to receive and handle the PCIe interrupts, based on the IRQ #.
  * For now, we simply send interrupts to non-dataplane CPUs.
@@ -134,24 +144,19 @@ static int tile_irq_cpu(int irq)
 	return cpu;
 }
 
-/*
- * Open a file descriptor to the TRIO shim.
- */
+/* Open a file descriptor to the TRIO shim. */
 static int tile_pcie_open(int trio_index)
 {
 	gxio_trio_context_t *context = &trio_contexts[trio_index];
 	int ret;
+	int mac;
 
-	/*
-	 * This opens a file descriptor to the TRIO shim.
-	 */
+	/* This opens a file descriptor to the TRIO shim. */
 	ret = gxio_trio_init(context, trio_index);
 	if (ret < 0)
-		return ret;
+		goto gxio_trio_init_failure;
 
-	/*
-	 * Allocate an ASID for the kernel.
-	 */
+	/* Allocate an ASID for the kernel. */
 	ret = gxio_trio_alloc_asids(context, 1, 0, 0);
 	if (ret < 0) {
 		pr_err("PCI: ASID alloc failure on TRIO %d, give up\n",
@@ -189,31 +194,97 @@ static int tile_pcie_open(int trio_index)
 	}
 #endif
 
+	/* Get the properties of the PCIe ports on this TRIO instance. */
+	ret = gxio_trio_get_port_property(context, &pcie_ports[trio_index]);
+	if (ret < 0) {
+		pr_err("PCI: PCIE_GET_PORT_PROPERTY failure, error %d,"
+		       " on TRIO %d\n", ret, trio_index);
+		goto get_port_property_failure;
+	}
+
+	context->mmio_base_mac =
+		iorpc_ioremap(context->fd, 0, HV_TRIO_CONFIG_IOREMAP_SIZE);
+	if (context->mmio_base_mac == NULL) {
+		pr_err("PCI: TRIO config space mapping failure, error %d,"
+		       " on TRIO %d\n", ret, trio_index);
+		ret = -ENOMEM;
+
+		goto trio_mmio_mapping_failure;
+	}
+
+	/* Check the port strap state which will override the BIB setting. */
+	for (mac = 0; mac < TILEGX_TRIO_PCIES; mac++) {
+		TRIO_PCIE_INTFC_PORT_CONFIG_t port_config;
+		unsigned int reg_offset;
+
+		/* Ignore ports that are not specified in the BIB. */
+		if (!pcie_ports[trio_index].ports[mac].allow_rc &&
+		    !pcie_ports[trio_index].ports[mac].allow_ep)
+			continue;
+
+		reg_offset =
+			(TRIO_PCIE_INTFC_PORT_CONFIG <<
+				TRIO_CFG_REGION_ADDR__REG_SHIFT) |
+			(TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE <<
+				TRIO_CFG_REGION_ADDR__INTFC_SHIFT) |
+			(mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT);
+
+		port_config.word =
+			__gxio_mmio_read(context->mmio_base_mac + reg_offset);
+
+		if (port_config.strap_state != AUTO_CONFIG_RC &&
+		    port_config.strap_state != AUTO_CONFIG_RC_G1) {
+			/*
+			 * If this is really intended to be an EP port, record
+			 * it so that the endpoint driver will know about it.
+			 */
+			if (port_config.strap_state == AUTO_CONFIG_EP ||
+			    port_config.strap_state == AUTO_CONFIG_EP_G1)
+				pcie_ports[trio_index].ports[mac].allow_ep = 1;
+		}
+	}
+
 	return ret;
 
+trio_mmio_mapping_failure:
+get_port_property_failure:
 asid_alloc_failure:
 #ifdef USE_SHARED_PCIE_CONFIG_REGION
 pio_alloc_failure:
 #endif
 	hv_dev_close(context->fd);
+gxio_trio_init_failure:
+	context->fd = -1;
 
 	return ret;
 }
 
-static void
-tilegx_legacy_irq_ack(struct irq_data *d)
+static int __init tile_trio_init(void)
+{
+	int i;
+
+	/* We loop over all the TRIO shims. */
+	for (i = 0; i < TILEGX_NUM_TRIO; i++) {
+		if (tile_pcie_open(i) < 0)
+			continue;
+		num_trio_shims++;
+	}
+
+	return 0;
+}
+postcore_initcall(tile_trio_init);
+
+static void tilegx_legacy_irq_ack(struct irq_data *d)
 {
 	__insn_mtspr(SPR_IPI_EVENT_RESET_K, 1UL << d->irq);
 }
 
-static void
-tilegx_legacy_irq_mask(struct irq_data *d)
+static void tilegx_legacy_irq_mask(struct irq_data *d)
 {
 	__insn_mtspr(SPR_IPI_MASK_SET_K, 1UL << d->irq);
 }
 
-static void
-tilegx_legacy_irq_unmask(struct irq_data *d)
+static void tilegx_legacy_irq_unmask(struct irq_data *d)
 {
 	__insn_mtspr(SPR_IPI_MASK_RESET_K, 1UL << d->irq);
 }
@@ -234,8 +305,7 @@ static struct irq_chip tilegx_legacy_irq_chip = {
  * to Linux which just calls handle_level_irq() after clearing the
  * MAC INTx Assert status bit associated with this interrupt.
  */
-static void
-trio_handle_level_irq(unsigned int irq, struct irq_desc *desc)
+static void trio_handle_level_irq(unsigned int irq, struct irq_desc *desc)
 {
 	struct pci_controller *controller = irq_desc_get_handler_data(desc);
 	gxio_trio_context_t *trio_context = controller->trio;
@@ -301,9 +371,7 @@ static int tile_init_irqs(struct pci_controller *controller)
 			goto free_irqs;
 		}
 
-		/*
-		 * Register the IRQ handler with the kernel.
-		 */
+		/* Register the IRQ handler with the kernel. */
 		irq_set_chip_and_handler(irq, &tilegx_legacy_irq_chip,
 					trio_handle_level_irq);
 		irq_set_chip_data(irq, (void *)(uint64_t)i);
@@ -320,14 +388,39 @@ free_irqs:
 }
 
 /*
+ * Return 1 if the port is strapped to operate in RC mode.
+ */
+static int
+strapped_for_rc(gxio_trio_context_t *trio_context, int mac)
+{
+	TRIO_PCIE_INTFC_PORT_CONFIG_t port_config;
+	unsigned int reg_offset;
+
+	/* Check the port configuration. */
+	reg_offset =
+		(TRIO_PCIE_INTFC_PORT_CONFIG <<
+			TRIO_CFG_REGION_ADDR__REG_SHIFT) |
+		(TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE <<
+			TRIO_CFG_REGION_ADDR__INTFC_SHIFT) |
+		(mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT);
+	port_config.word =
+		__gxio_mmio_read(trio_context->mmio_base_mac + reg_offset);
+
+	if (port_config.strap_state == AUTO_CONFIG_RC ||
+	    port_config.strap_state == AUTO_CONFIG_RC_G1)
+		return 1;
+	else
+		return 0;
+}
+
+/*
  * Find valid controllers and fill in pci_controller structs for each
  * of them.
  *
- * Returns the number of controllers discovered.
+ * Return the number of controllers discovered.
  */
 int __init tile_pci_init(void)
 {
-	int num_trio_shims = 0;
 	int ctl_index = 0;
 	int i, j;
 
@@ -338,64 +431,62 @@ int __init tile_pci_init(void)
 
 	pr_info("PCI: Searching for controllers...\n");
 
-	/*
-	 * We loop over all the TRIO shims.
-	 */
-	for (i = 0; i < TILEGX_NUM_TRIO; i++) {
-		int ret;
-
-		ret = tile_pcie_open(i);
-		if (ret < 0)
-			continue;
-
-		num_trio_shims++;
-	}
-
 	if (num_trio_shims == 0 || sim_is_simulator())
 		return 0;
 
 	/*
-	 * Now determine which PCIe ports are configured to operate in RC mode.
-	 * We look at the Board Information Block first and then see if there
-	 * are any overriding configuration by the HW strapping pin.
+	 * Now determine which PCIe ports are configured to operate in RC
+	 * mode. There is a differece in the port configuration capability
+	 * between the Gx36 and Gx72 devices.
+	 *
+	 * The Gx36 has configuration capability for each of the 3 PCIe
+	 * interfaces (disable, auto endpoint, auto RC, etc.).
+	 * On the Gx72, you can only select one of the 3 PCIe interfaces per
+	 * TRIO to train automatically. Further, the allowable training modes
+	 * are reduced to four options (auto endpoint, auto RC, stream x1,
+	 * stream x4).
+	 *
+	 * For Gx36 ports, it must be allowed to be in RC mode by the
+	 * Board Information Block, and the hardware strapping pins must be
+	 * set to RC mode.
+	 *
+	 * For Gx72 ports, the port will operate in RC mode if either of the
+	 * following is true:
+	 * 1. It is allowed to be in RC mode by the Board Information Block,
+	 *    and the BIB doesn't allow the EP mode.
+	 * 2. It is allowed to be in either the RC or the EP mode by the BIB,
+	 *    and the hardware strapping pin is set to RC mode.
 	 */
 	for (i = 0; i < TILEGX_NUM_TRIO; i++) {
 		gxio_trio_context_t *context = &trio_contexts[i];
-		int ret;
 
 		if (context->fd < 0)
 			continue;
 
-		ret = hv_dev_pread(context->fd, 0,
-			(HV_VirtAddr)&pcie_ports[i][0],
-			sizeof(struct pcie_port_property) * TILEGX_TRIO_PCIES,
-			GXIO_TRIO_OP_GET_PORT_PROPERTY);
-		if (ret < 0) {
-			pr_err("PCI: PCIE_GET_PORT_PROPERTY failure, error %d,"
-				" on TRIO %d\n", ret, i);
-			continue;
-		}
-
 		for (j = 0; j < TILEGX_TRIO_PCIES; j++) {
-			if (pcie_ports[i][j].allow_rc) {
+			int is_rc = 0;
+
+			if (pcie_ports[i].is_gx72 &&
+			    pcie_ports[i].ports[j].allow_rc) {
+				if (!pcie_ports[i].ports[j].allow_ep ||
+				    strapped_for_rc(context, j))
+					is_rc = 1;
+			} else if (pcie_ports[i].ports[j].allow_rc &&
+				   strapped_for_rc(context, j)) {
+				is_rc = 1;
+			}
+			if (is_rc) {
 				pcie_rc[i][j] = 1;
 				num_rc_controllers++;
 			}
-			else if (pcie_ports[i][j].allow_ep) {
-				num_ep_controllers++;
-			}
 		}
 	}
 
-	/*
-	 * Return if no PCIe ports are configured to operate in RC mode.
-	 */
+	/* Return if no PCIe ports are configured to operate in RC mode. */
 	if (num_rc_controllers == 0)
 		return 0;
 
-	/*
-	 * Set the TRIO pointer and MAC index for each PCIe RC port.
-	 */
+	/* Set the TRIO pointer and MAC index for each PCIe RC port. */
 	for (i = 0; i < TILEGX_NUM_TRIO; i++) {
 		for (j = 0; j < TILEGX_TRIO_PCIES; j++) {
 			if (pcie_rc[i][j]) {
@@ -411,26 +502,32 @@ int __init tile_pci_init(void)
 	}
 
 out:
-	/*
-	 * Configure each PCIe RC port.
-	 */
+	/* Configure each PCIe RC port. */
 	for (i = 0; i < num_rc_controllers; i++) {
-		/*
-		 * Configure the PCIe MAC to run in RC mode.
-		 */
 
+		/* Configure the PCIe MAC to run in RC mode. */
 		struct pci_controller *controller = &pci_controllers[i];
 
 		controller->index = i;
 		controller->ops = &tile_cfg_ops;
 
+		controller->io_space.start = PCIBIOS_MIN_IO +
+			(i * IO_SPACE_SIZE);
+		controller->io_space.end = controller->io_space.start +
+			IO_SPACE_SIZE - 1;
+		BUG_ON(controller->io_space.end > IO_SPACE_LIMIT);
+		controller->io_space.flags = IORESOURCE_IO;
+		snprintf(controller->io_space_name,
+			 sizeof(controller->io_space_name),
+			 "PCI I/O domain %d", i);
+		controller->io_space.name = controller->io_space_name;
+
 		/*
 		 * The PCI memory resource is located above the PA space.
 		 * For every host bridge, the BAR window or the MMIO aperture
 		 * is in range [3GB, 4GB - 1] of a 4GB space beyond the
 		 * PA space.
 		 */
-
 		controller->mem_offset = TILE_PCI_MEM_START +
 			(i * TILE_PCI_BAR_WINDOW_TOP);
 		controller->mem_space.start = controller->mem_offset +
@@ -458,7 +555,6 @@ static int tile_map_irq(const struct pci_dev *dev, u8 device, u8 pin)
 	return controller->irq_intx_table[pin - 1];
 }
 
-
 static void fixup_read_and_payload_sizes(struct pci_controller *controller)
 {
 	gxio_trio_context_t *trio_context = controller->trio;
@@ -472,9 +568,7 @@ static void fixup_read_and_payload_sizes(struct pci_controller *controller)
 
 	mac = controller->mac;
 
-	/*
-	 * Set our max read request size to be 4KB.
-	 */
+	/* Set our max read request size to be 4KB. */
 	reg_offset =
 		(TRIO_PCIE_RC_DEVICE_CONTROL <<
 			TRIO_CFG_REGION_ADDR__REG_SHIFT) |
@@ -483,10 +577,10 @@ static void fixup_read_and_payload_sizes(struct pci_controller *controller)
 		(mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT);
 
 	dev_control.word = __gxio_mmio_read32(trio_context->mmio_base_mac +
-						reg_offset);
+					      reg_offset);
 	dev_control.max_read_req_sz = 5;
 	__gxio_mmio_write32(trio_context->mmio_base_mac + reg_offset,
-						dev_control.word);
+			    dev_control.word);
 
 	/*
 	 * Set the max payload size supported by this Gx PCIe MAC.
@@ -502,19 +596,14 @@ static void fixup_read_and_payload_sizes(struct pci_controller *controller)
 		(mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT);
 
 	rc_dev_cap.word = __gxio_mmio_read32(trio_context->mmio_base_mac +
-						reg_offset);
+					     reg_offset);
 	rc_dev_cap.mps_sup = 1;
 	__gxio_mmio_write32(trio_context->mmio_base_mac + reg_offset,
-						rc_dev_cap.word);
+			    rc_dev_cap.word);
 
 	/* Configure PCI Express MPS setting. */
-	list_for_each_entry(child, &root_bus->children, node) {
-		struct pci_dev *self = child->self;
-		if (!self)
-			continue;
-
-		pcie_bus_configure_settings(child, self->pcie_mpss);
-	}
+	list_for_each_entry(child, &root_bus->children, node)
+		pcie_bus_configure_settings(child);
 
 	/*
 	 * Set the mac_config register in trio based on the MPS/MRS of the link.
@@ -533,7 +622,7 @@ static void fixup_read_and_payload_sizes(struct pci_controller *controller)
 				    dev_control.max_payload_size,
 				    dev_control.max_read_req_sz,
 				    mac);
-        if (err < 0) {
+	if (err < 0) {
 		pr_err("PCI: PCIE_CONFIGURE_MAC_MPS_MRS failure, "
 			"MAC %d on TRIO %d\n",
 			mac, controller->trio_index);
@@ -570,21 +659,14 @@ static int setup_pcie_rc_delay(char *str)
 		if (!isdigit(*str))
 			return -EINVAL;
 		delay = simple_strtoul(str, (char **)&str, 10);
-		if (delay > MAX_RC_DELAY)
-			return -EINVAL;
 	}
 
 	rc_delay[trio_index][mac] = delay ? : DEFAULT_RC_DELAY;
-	pr_info("Delaying PCIe RC link training for %u sec"
-		" on MAC %lu on TRIO %lu\n", rc_delay[trio_index][mac],
-		mac, trio_index);
 	return 0;
 }
 early_param("pcie_rc_delay", setup_pcie_rc_delay);
 
-/*
- * PCI initialization entry point, called by subsys_initcall.
- */
+/* PCI initialization entry point, called by subsys_initcall. */
 int __init pcibios_init(void)
 {
 	resource_size_t offset;
@@ -594,35 +676,10 @@ int __init pcibios_init(void)
 
 	tile_pci_init();
 
-	if (num_rc_controllers == 0 && num_ep_controllers == 0)
+	if (num_rc_controllers == 0)
 		return 0;
 
 	/*
-	 * We loop over all the TRIO shims and set up the MMIO mappings.
-	 */
-	for (i = 0; i < TILEGX_NUM_TRIO; i++) {
-		gxio_trio_context_t *context = &trio_contexts[i];
-
-		if (context->fd < 0)
-			continue;
-
-		/*
-		 * Map in the MMIO space for the MAC.
-		 */
-		offset = 0;
-		context->mmio_base_mac =
-			iorpc_ioremap(context->fd, offset,
-				      HV_TRIO_CONFIG_IOREMAP_SIZE);
-		if (context->mmio_base_mac == NULL) {
-			pr_err("PCI: MAC map failure on TRIO %d\n", i);
-
-			hv_dev_close(context->fd);
-			context->fd = -1;
-			continue;
-		}
-	}
-
-	/*
 	 * Delay a bit in case devices aren't ready.  Some devices are
 	 * known to require at least 20ms here, but we use a more
 	 * conservative value.
@@ -633,7 +690,6 @@ int __init pcibios_init(void)
 	for (next_busno = 0, i = 0; i < num_rc_controllers; i++) {
 		struct pci_controller *controller = &pci_controllers[i];
 		gxio_trio_context_t *trio_context = controller->trio;
-		TRIO_PCIE_INTFC_PORT_CONFIG_t port_config;
 		TRIO_PCIE_INTFC_PORT_STATUS_t port_status;
 		TRIO_PCIE_INTFC_TX_FIFO_CTL_t tx_fifo_ctl;
 		struct pci_bus *bus;
@@ -650,75 +706,64 @@ int __init pcibios_init(void)
 		mac = controller->mac;
 
 		/*
-		 * Check the port strap state which will override the BIB
-		 * setting.
+		 * Check for PCIe link-up status to decide if we need
+		 * to force the link to come up.
 		 */
-
 		reg_offset =
-			(TRIO_PCIE_INTFC_PORT_CONFIG <<
+			(TRIO_PCIE_INTFC_PORT_STATUS <<
 				TRIO_CFG_REGION_ADDR__REG_SHIFT) |
 			(TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE <<
-				TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) |
+				TRIO_CFG_REGION_ADDR__INTFC_SHIFT) |
 			(mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT);
 
-		port_config.word =
+		port_status.word =
 			__gxio_mmio_read(trio_context->mmio_base_mac +
 					 reg_offset);
-
-		if ((port_config.strap_state !=
-			TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_RC) &&
-			(port_config.strap_state !=
-			TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_RC_G1)) {
-			/*
-			 * If this is really intended to be an EP port,
-			 * record it so that the endpoint driver will know about it.
-			 */
-			if (port_config.strap_state ==
-			TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_ENDPOINT ||
-			port_config.strap_state ==
-			TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_ENDPOINT_G1)
-				pcie_ports[trio_index][mac].allow_ep = 1;
-
-			continue;
+		if (!port_status.dl_up) {
+			if (rc_delay[trio_index][mac]) {
+				pr_info("Delaying PCIe RC TRIO init %d sec"
+					" on MAC %d on TRIO %d\n",
+					rc_delay[trio_index][mac], mac,
+					trio_index);
+				msleep(rc_delay[trio_index][mac] * 1000);
+			}
+			ret = gxio_trio_force_rc_link_up(trio_context, mac);
+			if (ret < 0)
+				pr_err("PCI: PCIE_FORCE_LINK_UP failure, "
+					"MAC %d on TRIO %d\n", mac, trio_index);
 		}
 
-		/*
-		 * Delay the RC link training if needed.
-		 */
-		if (rc_delay[trio_index][mac])
-			msleep(rc_delay[trio_index][mac] * 1000);
-
-		ret = gxio_trio_force_rc_link_up(trio_context, mac);
-		if (ret < 0)
-			pr_err("PCI: PCIE_FORCE_LINK_UP failure, "
-				"MAC %d on TRIO %d\n", mac, trio_index);
-
 		pr_info("PCI: Found PCI controller #%d on TRIO %d MAC %d\n", i,
 			trio_index, controller->mac);
 
-		/*
-		 * Wait a bit here because some EP devices take longer
-		 * to come up.
-		 */
-		msleep(1000);
-
-		/*
-		 * Check for PCIe link-up status.
-		 */
-
-		reg_offset =
-			(TRIO_PCIE_INTFC_PORT_STATUS <<
-				TRIO_CFG_REGION_ADDR__REG_SHIFT) |
-			(TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE <<
-				TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) |
-			(mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT);
+		/* Delay the bus probe if needed. */
+		if (rc_delay[trio_index][mac]) {
+			pr_info("Delaying PCIe RC bus enumerating %d sec"
+				" on MAC %d on TRIO %d\n",
+				rc_delay[trio_index][mac], mac,
+				trio_index);
+			msleep(rc_delay[trio_index][mac] * 1000);
+		} else {
+			/*
+			 * Wait a bit here because some EP devices
+			 * take longer to come up.
+			 */
+			msleep(1000);
+		}
 
+		/* Check for PCIe link-up status again. */
 		port_status.word =
 			__gxio_mmio_read(trio_context->mmio_base_mac +
 					 reg_offset);
 		if (!port_status.dl_up) {
-			pr_err("PCI: link is down, MAC %d on TRIO %d\n",
-				mac, trio_index);
+			if (pcie_ports[trio_index].ports[mac].removable) {
+				pr_info("PCI: link is down, MAC %d on TRIO %d\n",
+					mac, trio_index);
+				pr_info("This is expected if no PCIe card"
+					" is connected to this link\n");
+			} else
+				pr_err("PCI: link is down, MAC %d on TRIO %d\n",
+					mac, trio_index);
 			continue;
 		}
 
@@ -744,7 +789,6 @@ int __init pcibios_init(void)
 		 * Change the device ID so that Linux bus crawl doesn't confuse
 		 * the internal bridge with any Tilera endpoints.
 		 */
-
 		reg_offset =
 			(TRIO_PCIE_RC_DEVICE_ID_VEN_ID <<
 				TRIO_CFG_REGION_ADDR__REG_SHIFT) |
@@ -757,10 +801,7 @@ int __init pcibios_init(void)
 				    TRIO_PCIE_RC_DEVICE_ID_VEN_ID__DEV_ID_SHIFT) |
 				    TILERA_VENDOR_ID);
 
-		/*
-		 * Set the internal P2P bridge class code.
-		 */
-
+		/* Set the internal P2P bridge class code. */
 		reg_offset =
 			(TRIO_PCIE_RC_REVISION_ID <<
 				TRIO_CFG_REGION_ADDR__REG_SHIFT) |
@@ -771,26 +812,22 @@ int __init pcibios_init(void)
 		class_code_revision =
 			__gxio_mmio_read32(trio_context->mmio_base_mac +
 					   reg_offset);
-		class_code_revision = (class_code_revision & 0xff ) |
-					(PCI_CLASS_BRIDGE_PCI << 16);
+		class_code_revision = (class_code_revision & 0xff) |
+			(PCI_CLASS_BRIDGE_PCI << 16);
 
 		__gxio_mmio_write32(trio_context->mmio_base_mac +
 				    reg_offset, class_code_revision);
 
 #ifdef USE_SHARED_PCIE_CONFIG_REGION
 
-		/*
-		 * Map in the MMIO space for the PIO region.
-		 */
+		/* Map in the MMIO space for the PIO region. */
 		offset = HV_TRIO_PIO_OFFSET(trio_context->pio_cfg_index) |
 			(((unsigned long long)mac) <<
 			TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT);
 
 #else
 
-		/*
-		 * Alloc a PIO region for PCI config access per MAC.
-		 */
+		/* Alloc a PIO region for PCI config access per MAC. */
 		ret = gxio_trio_alloc_pio_regions(trio_context, 1, 0, 0);
 		if (ret < 0) {
 			pr_err("PCI: PCI CFG PIO alloc failure for mac %d "
@@ -801,9 +838,7 @@ int __init pcibios_init(void)
 
 		trio_context->pio_cfg_index[mac] = ret;
 
-		/*
-		 * For PIO CFG, the bus_address_hi parameter is 0.
-		 */
+		/* For PIO CFG, the bus_address_hi parameter is 0. */
 		ret = gxio_trio_init_pio_region_aux(trio_context,
 			trio_context->pio_cfg_index[mac],
 			mac, 0, HV_TRIO_PIO_FLAG_CONFIG_SPACE);
@@ -820,9 +855,15 @@ int __init pcibios_init(void)
 
 #endif
 
+		/*
+		 * To save VMALLOC space, we take advantage of the fact that
+		 * bit 29 in the PIO CFG address format is reserved 0. With
+		 * TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT being 30,
+		 * this cuts VMALLOC space usage from 1GB to 512MB per mac.
+		 */
 		trio_context->mmio_base_pio_cfg[mac] =
-			iorpc_ioremap(trio_context->fd, offset,
-			(1 << TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT));
+			iorpc_ioremap(trio_context->fd, offset, (1UL <<
+			(TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT - 1)));
 		if (trio_context->mmio_base_pio_cfg[mac] == NULL) {
 			pr_err("PCI: PIO map failure for mac %d on TRIO %d\n",
 				mac, trio_index);
@@ -830,9 +871,7 @@ int __init pcibios_init(void)
 			continue;
 		}
 
-		/*
-		 * Initialize the PCIe interrupts.
-		 */
+		/* Initialize the PCIe interrupts. */
 		if (tile_init_irqs(controller)) {
 			pr_err("PCI: IRQs init failure for mac %d on TRIO %d\n",
 				mac, trio_index);
@@ -843,17 +882,16 @@ int __init pcibios_init(void)
 		/*
 		 * The PCI memory resource is located above the PA space.
 		 * The memory range for the PCI root bus should not overlap
-		 * with the physical RAM
+		 * with the physical RAM.
 		 */
 		pci_add_resource_offset(&resources, &controller->mem_space,
 					controller->mem_offset);
-
+		pci_add_resource(&resources, &controller->io_space);
 		controller->first_busno = next_busno;
 		bus = pci_scan_root_bus(NULL, next_busno, controller->ops,
 					controller, &resources);
 		controller->root_bus = bus;
 		next_busno = bus->busn_res.end + 1;
-
 	}
 
 	/* Do machine dependent PCI interrupt routing */
@@ -865,7 +903,6 @@ int __init pcibios_init(void)
 	 * It allocates all of the resources (I/O memory, etc)
 	 * associated with the devices read in above.
 	 */
-
 	pci_assign_unassigned_resources();
 
 	/* Record the I/O resources in the PCI controller structure. */
@@ -873,9 +910,6 @@ int __init pcibios_init(void)
 		struct pci_controller *controller = &pci_controllers[i];
 		gxio_trio_context_t *trio_context = controller->trio;
 		struct pci_bus *root_bus = pci_controllers[i].root_bus;
-		struct pci_bus *next_bus;
-		uint32_t bus_address_hi;
-		struct pci_dev *dev;
 		int ret;
 		int j;
 
@@ -889,43 +923,12 @@ int __init pcibios_init(void)
 		/* Configure the max_payload_size values for this domain. */
 		fixup_read_and_payload_sizes(controller);
 
-		list_for_each_entry(dev, &root_bus->devices, bus_list) {
-			/* Find the PCI host controller, ie. the 1st bridge. */
-			if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
-				(PCI_SLOT(dev->devfn) == 0)) {
-				next_bus = dev->subordinate;
-				pci_controllers[i].mem_resources[0] =
-					*next_bus->resource[0];
-				pci_controllers[i].mem_resources[1] =
-					 *next_bus->resource[1];
-				pci_controllers[i].mem_resources[2] =
-					 *next_bus->resource[2];
-
-				break;
-			}
-		}
-
-		if (pci_controllers[i].mem_resources[1].flags & IORESOURCE_MEM)
-			bus_address_hi =
-				pci_controllers[i].mem_resources[1].start >> 32;
-		else if (pci_controllers[i].mem_resources[2].flags & IORESOURCE_PREFETCH)
-			bus_address_hi =
-				pci_controllers[i].mem_resources[2].start >> 32;
-		else {
-			/* This is unlikely. */
-			pr_err("PCI: no memory resources on TRIO %d mac %d\n",
-				controller->trio_index, controller->mac);
-			continue;
-		}
-
-		/*
-		 * Alloc a PIO region for PCI memory access for each RC port.
-		 */
+		/* Alloc a PIO region for PCI memory access for each RC port. */
 		ret = gxio_trio_alloc_pio_regions(trio_context, 1, 0, 0);
 		if (ret < 0) {
 			pr_err("PCI: MEM PIO alloc failure on TRIO %d mac %d, "
-				"give up\n", controller->trio_index,
-				controller->mac);
+			       "give up\n", controller->trio_index,
+			       controller->mac);
 
 			continue;
 		}
@@ -943,12 +946,45 @@ int __init pcibios_init(void)
 						    0);
 		if (ret < 0) {
 			pr_err("PCI: MEM PIO init failure on TRIO %d mac %d, "
-				"give up\n", controller->trio_index,
-				controller->mac);
+			       "give up\n", controller->trio_index,
+			       controller->mac);
+
+			continue;
+		}
+
+#ifdef CONFIG_TILE_PCI_IO
+		/*
+		 * Alloc a PIO region for PCI I/O space access for each RC port.
+		 */
+		ret = gxio_trio_alloc_pio_regions(trio_context, 1, 0, 0);
+		if (ret < 0) {
+			pr_err("PCI: I/O PIO alloc failure on TRIO %d mac %d, "
+			       "give up\n", controller->trio_index,
+			       controller->mac);
 
 			continue;
 		}
 
+		controller->pio_io_index = ret;
+
+		/*
+		 * For PIO IO, the bus_address_hi parameter is hard-coded 0
+		 * because PCI I/O address space is 32-bit.
+		 */
+		ret = gxio_trio_init_pio_region_aux(trio_context,
+						    controller->pio_io_index,
+						    controller->mac,
+						    0,
+						    HV_TRIO_PIO_FLAG_IO_SPACE);
+		if (ret < 0) {
+			pr_err("PCI: I/O PIO init failure on TRIO %d mac %d, "
+			       "give up\n", controller->trio_index,
+			       controller->mac);
+
+			continue;
+		}
+#endif
+
 		/*
 		 * Configure a Mem-Map region for each memory controller so
 		 * that Linux can map all of its PA space to the PCI bus.
@@ -963,9 +999,9 @@ int __init pcibios_init(void)
 							  0);
 			if (ret < 0) {
 				pr_err("PCI: Mem-Map alloc failure on TRIO %d "
-					"mac %d for MC %d, give up\n",
-					controller->trio_index,
-					controller->mac, j);
+				       "mac %d for MC %d, give up\n",
+				       controller->trio_index,
+				       controller->mac, j);
 
 				goto alloc_mem_map_failed;
 			}
@@ -996,9 +1032,9 @@ int __init pcibios_init(void)
 				GXIO_TRIO_ORDER_MODE_UNORDERED);
 			if (ret < 0) {
 				pr_err("PCI: Mem-Map init failure on TRIO %d "
-					"mac %d for MC %d, give up\n",
-					controller->trio_index,
-					controller->mac, j);
+				       "mac %d for MC %d, give up\n",
+				       controller->trio_index,
+				       controller->mac, j);
 
 				goto alloc_mem_map_failed;
 			}
@@ -1007,23 +1043,19 @@ int __init pcibios_init(void)
 alloc_mem_map_failed:
 			break;
 		}
-
 	}
 
 	return 0;
 }
 subsys_initcall(pcibios_init);
 
-/* Note: to be deleted after Linux 3.6 merge. */
+/* No bus fixups needed. */
 void pcibios_fixup_bus(struct pci_bus *bus)
 {
 }
 
-/*
- * This can be called from the generic PCI layer, but doesn't need to
- * do anything.
- */
-char *pcibios_setup(char *str)
+/* Process any "pci=" kernel boot arguments. */
+char *__init pcibios_setup(char *str)
 {
 	if (!strcmp(str, "off")) {
 		pci_probe = 0;
@@ -1034,8 +1066,7 @@ char *pcibios_setup(char *str)
 
 /*
  * Enable memory address decoding, as appropriate, for the
- * device described by the 'dev' struct. The I/O decoding
- * is disabled, though the TILE-Gx supports I/O addressing.
+ * device described by the 'dev' struct.
  *
  * This is called from the generic PCI layer, and can be called
  * for bridges or endpoints.
@@ -1045,13 +1076,24 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
 	return pci_enable_resources(dev, mask);
 }
 
-/* Called for each device after PCI setup is done. */
+/*
+ * Called for each device after PCI setup is done.
+ * We initialize the PCI device capabilities conservatively, assuming that
+ * all devices can only address the 32-bit DMA space. The exception here is
+ * that the device dma_offset is set to the value that matches the 64-bit
+ * capable devices. This is OK because dma_offset is not used by legacy
+ * dma_ops, nor by the hybrid dma_ops's streaming DMAs, which are 64-bit ops.
+ * This implementation matches the kernel design of setting PCI devices'
+ * coherent_dma_mask to 0xffffffffull by default, allowing the device drivers
+ * to skip calling pci_set_consistent_dma_mask(DMA_BIT_MASK(32)).
+ */
 static void pcibios_fixup_final(struct pci_dev *pdev)
 {
-	set_dma_ops(&pdev->dev, gx_pci_dma_map_ops);
+	set_dma_ops(&pdev->dev, gx_legacy_pci_dma_map_ops);
 	set_dma_offset(&pdev->dev, TILE_PCI_MEM_MAP_BASE_OFFSET);
 	pdev->dev.archdata.max_direct_dma_addr =
 		TILE_PCI_MAX_DIRECT_DMA_ADDRESS;
+	pdev->dev.coherent_dma_mask = TILE_PCI_MAX_DIRECT_DMA_ADDRESS;
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_final);
 
@@ -1065,19 +1107,15 @@ void __iomem *ioremap(resource_size_t phys_addr, unsigned long size)
 	resource_size_t start;
 	resource_size_t end;
 	int trio_fd;
-	int i, j;
+	int i;
 
 	start = phys_addr;
 	end = phys_addr + size - 1;
 
 	/*
-	 * In the following, each PCI controller's mem_resources[1]
-	 * represents its (non-prefetchable) PCI memory resource and
-	 * mem_resources[2] refers to its prefetchable PCI memory resource.
-	 * By searching phys_addr in each controller's mem_resources[], we can
+	 * By searching phys_addr in each controller's mem_space, we can
 	 * determine the controller that should accept the PCI memory access.
 	 */
-
 	for (i = 0; i < num_rc_controllers; i++) {
 		/*
 		 * Skip controllers that are not properly initialized or
@@ -1086,25 +1124,18 @@ void __iomem *ioremap(resource_size_t phys_addr, unsigned long size)
 		if (pci_controllers[i].root_bus == NULL)
 			continue;
 
-		for (j = 1; j < 3; j++) {
-			bar_start =
-				pci_controllers[i].mem_resources[j].start;
-			bar_end =
-				pci_controllers[i].mem_resources[j].end;
+		bar_start = pci_controllers[i].mem_space.start;
+		bar_end = pci_controllers[i].mem_space.end;
 
-			if ((start >= bar_start) && (end <= bar_end)) {
-
-				controller = &pci_controllers[i];
-
-				goto got_it;
-			}
+		if ((start >= bar_start) && (end <= bar_end)) {
+			controller = &pci_controllers[i];
+			break;
 		}
 	}
 
 	if (controller == NULL)
 		return NULL;
 
-got_it:
 	trio_fd = controller->trio->fd;
 
 	/* Convert the resource start to the bus address offset. */
@@ -1112,14 +1143,71 @@ got_it:
 
 	offset = HV_TRIO_PIO_OFFSET(controller->pio_mem_index) + start;
 
-	/*
-	 * We need to keep the PCI bus address's in-page offset in the VA.
-	 */
+	/* We need to keep the PCI bus address's in-page offset in the VA. */
 	return iorpc_ioremap(trio_fd, offset, size) +
-		(phys_addr & (PAGE_SIZE - 1));
+		(start & (PAGE_SIZE - 1));
 }
 EXPORT_SYMBOL(ioremap);
 
+#ifdef CONFIG_TILE_PCI_IO
+/* Map a PCI I/O address into VA space. */
+void __iomem *ioport_map(unsigned long port, unsigned int size)
+{
+	struct pci_controller *controller = NULL;
+	resource_size_t bar_start;
+	resource_size_t bar_end;
+	resource_size_t offset;
+	resource_size_t start;
+	resource_size_t end;
+	int trio_fd;
+	int i;
+
+	start = port;
+	end = port + size - 1;
+
+	/*
+	 * By searching the port in each controller's io_space, we can
+	 * determine the controller that should accept the PCI I/O access.
+	 */
+	for (i = 0; i < num_rc_controllers; i++) {
+		/*
+		 * Skip controllers that are not properly initialized or
+		 * have down links.
+		 */
+		if (pci_controllers[i].root_bus == NULL)
+			continue;
+
+		bar_start = pci_controllers[i].io_space.start;
+		bar_end = pci_controllers[i].io_space.end;
+
+		if ((start >= bar_start) && (end <= bar_end)) {
+			controller = &pci_controllers[i];
+			break;
+		}
+	}
+
+	if (controller == NULL)
+		return NULL;
+
+	trio_fd = controller->trio->fd;
+
+	/* Convert the resource start to the bus address offset. */
+	port -= controller->io_space.start;
+
+	offset = HV_TRIO_PIO_OFFSET(controller->pio_io_index) + port;
+
+	/* We need to keep the PCI bus address's in-page offset in the VA. */
+	return iorpc_ioremap(trio_fd, offset, size) + (port & (PAGE_SIZE - 1));
+}
+EXPORT_SYMBOL(ioport_map);
+
+void ioport_unmap(void __iomem *addr)
+{
+	iounmap(addr);
+}
+EXPORT_SYMBOL(ioport_unmap);
+#endif
+
 void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
 {
 	iounmap(addr);
@@ -1141,7 +1229,6 @@ EXPORT_SYMBOL(pci_iounmap);
  * offset is in bytes, from the start of config space for the
  * specified bus & device.
  */
-
 static int tile_cfg_read(struct pci_bus *bus, unsigned int devfn, int offset,
 			 int size, u32 *val)
 {
@@ -1191,7 +1278,6 @@ static int tile_cfg_read(struct pci_bus *bus, unsigned int devfn, int offset,
 	 * Accesses to the directly attached device have to be
 	 * sent as type-0 configs.
 	 */
-
 	if (busnum == (controller->first_busno + 1)) {
 		/*
 		 * There is only one device off of our built-in P2P bridge.
@@ -1213,9 +1299,8 @@ static int tile_cfg_read(struct pci_bus *bus, unsigned int devfn, int offset,
 	 * Note that we don't set the mac field in cfg_addr because the
 	 * mapping is per port.
 	 */
-
 	mmio_addr = trio_context->mmio_base_pio_cfg[controller->mac] +
-			cfg_addr.word;
+		cfg_addr.word;
 
 valid_device:
 
@@ -1319,7 +1404,6 @@ static int tile_cfg_write(struct pci_bus *bus, unsigned int devfn, int offset,
 	 * Accesses to the directly attached device have to be
 	 * sent as type-0 configs.
 	 */
-
 	if (busnum == (controller->first_busno + 1)) {
 		/*
 		 * There is only one device off of our built-in P2P bridge.
@@ -1341,7 +1425,6 @@ static int tile_cfg_write(struct pci_bus *bus, unsigned int devfn, int offset,
 	 * Note that we don't set the mac field in cfg_addr because the
 	 * mapping is per port.
 	 */
-
 	mmio_addr = trio_context->mmio_base_pio_cfg[controller->mac] +
 			cfg_addr.word;
 
@@ -1379,11 +1462,8 @@ static struct pci_ops tile_cfg_ops = {
 };
 
 
-/*
- * MSI support starts here.
- */
-static unsigned int
-tilegx_msi_startup(struct irq_data *d)
+/* MSI support starts here. */
+static unsigned int tilegx_msi_startup(struct irq_data *d)
 {
 	if (d->msi_desc)
 		unmask_msi_irq(d);
@@ -1391,21 +1471,18 @@ tilegx_msi_startup(struct irq_data *d)
 	return 0;
 }
 
-static void
-tilegx_msi_ack(struct irq_data *d)
+static void tilegx_msi_ack(struct irq_data *d)
 {
 	__insn_mtspr(SPR_IPI_EVENT_RESET_K, 1UL << d->irq);
 }
 
-static void
-tilegx_msi_mask(struct irq_data *d)
+static void tilegx_msi_mask(struct irq_data *d)
 {
 	mask_msi_irq(d);
 	__insn_mtspr(SPR_IPI_MASK_SET_K, 1UL << d->irq);
 }
 
-static void
-tilegx_msi_unmask(struct irq_data *d)
+static void tilegx_msi_unmask(struct irq_data *d)
 {
 	__insn_mtspr(SPR_IPI_MASK_RESET_K, 1UL << d->irq);
 	unmask_msi_irq(d);
@@ -1462,32 +1539,55 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 	trio_context = controller->trio;
 
 	/*
-	 * Allocate the Mem-Map that will accept the MSI write and
-	 * trigger the TILE-side interrupts.
+	 * Allocate a scatter-queue that will accept the MSI write and
+	 * trigger the TILE-side interrupts. We use the scatter-queue regions
+	 * before the mem map regions, because the latter are needed by more
+	 * applications.
 	 */
-	mem_map = gxio_trio_alloc_memory_maps(trio_context, 1, 0, 0);
-	if (mem_map < 0) {
-		dev_printk(KERN_INFO, &pdev->dev,
-			"%s Mem-Map alloc failure. "
-			"Failed to initialize MSI interrupts. "
-			"Falling back to legacy interrupts.\n",
-			desc->msi_attrib.is_msix ? "MSI-X" : "MSI");
+	mem_map = gxio_trio_alloc_scatter_queues(trio_context, 1, 0, 0);
+	if (mem_map >= 0) {
+		TRIO_MAP_SQ_DOORBELL_FMT_t doorbell_template = {{
+			.pop = 0,
+			.doorbell = 1,
+		}};
+
+		mem_map += TRIO_NUM_MAP_MEM_REGIONS;
+		mem_map_base = MEM_MAP_INTR_REGIONS_BASE +
+			mem_map * MEM_MAP_INTR_REGION_SIZE;
+		mem_map_limit = mem_map_base + MEM_MAP_INTR_REGION_SIZE - 1;
+
+		msi_addr = mem_map_base + MEM_MAP_INTR_REGION_SIZE - 8;
+		msg.data = (unsigned int)doorbell_template.word;
+	} else {
+		/* SQ regions are out, allocate from map mem regions. */
+		mem_map = gxio_trio_alloc_memory_maps(trio_context, 1, 0, 0);
+		if (mem_map < 0) {
+			dev_printk(KERN_INFO, &pdev->dev,
+				"%s Mem-Map alloc failure. "
+				"Failed to initialize MSI interrupts. "
+				"Falling back to legacy interrupts.\n",
+				desc->msi_attrib.is_msix ? "MSI-X" : "MSI");
+			ret = -ENOMEM;
+			goto msi_mem_map_alloc_failure;
+		}
 
-		ret = -ENOMEM;
-		goto msi_mem_map_alloc_failure;
+		mem_map_base = MEM_MAP_INTR_REGIONS_BASE +
+			mem_map * MEM_MAP_INTR_REGION_SIZE;
+		mem_map_limit = mem_map_base + MEM_MAP_INTR_REGION_SIZE - 1;
+
+		msi_addr = mem_map_base + TRIO_MAP_MEM_REG_INT3 -
+			TRIO_MAP_MEM_REG_INT0;
+
+		msg.data = mem_map;
 	}
 
 	/* We try to distribute different IRQs to different tiles. */
 	cpu = tile_irq_cpu(irq);
 
 	/*
-	 * Now call up to the HV to configure the Mem-Map interrupt and
+	 * Now call up to the HV to configure the MSI interrupt and
 	 * set up the IPI binding.
 	 */
-	mem_map_base = MEM_MAP_INTR_REGIONS_BASE +
-		mem_map * MEM_MAP_INTR_REGION_SIZE;
-	mem_map_limit = mem_map_base + MEM_MAP_INTR_REGION_SIZE - 1;
-
 	ret = gxio_trio_config_msi_intr(trio_context, cpu_x(cpu), cpu_y(cpu),
 					KERNEL_PL, irq, controller->mac,
 					mem_map, mem_map_base, mem_map_limit,
@@ -1500,13 +1600,9 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 
 	irq_set_msi_desc(irq, desc);
 
-	msi_addr = mem_map_base + TRIO_MAP_MEM_REG_INT3 - TRIO_MAP_MEM_REG_INT0;
-
 	msg.address_hi = msi_addr >> 32;
 	msg.address_lo = msi_addr & 0xffffffff;
 
-	msg.data = mem_map;
-
 	write_msi_msg(irq, &msg);
 	irq_set_chip_and_handler(irq, &tilegx_msi_chip, handle_level_irq);
 	irq_set_handler_data(irq, controller);
diff --git a/arch/tile/kernel/proc.c b/arch/tile/kernel/proc.c
index dafc447..681100c 100644
--- a/arch/tile/kernel/proc.c
+++ b/arch/tile/kernel/proc.c
@@ -113,7 +113,6 @@ arch_initcall(proc_tile_init);
  * Support /proc/sys/tile directory
  */
 
-#ifndef __tilegx__  /* FIXME: GX: no support for unaligned access yet */
 static ctl_table unaligned_subtable[] = {
 	{
 		.procname	= "enabled",
@@ -160,4 +159,3 @@ static int __init proc_sys_tile_init(void)
 }
 
 arch_initcall(proc_sys_tile_init);
-#endif
diff --git a/arch/tile/kernel/process.c b/arch/tile/kernel/process.c
index 8ac3044..16ed589 100644
--- a/arch/tile/kernel/process.c
+++ b/arch/tile/kernel/process.c
@@ -33,6 +33,7 @@
 #include <asm/syscalls.h>
 #include <asm/traps.h>
 #include <asm/setup.h>
+#include <asm/uaccess.h>
 #ifdef CONFIG_HARDWALL
 #include <asm/hardwall.h>
 #endif
@@ -74,19 +75,6 @@ void arch_release_thread_info(struct thread_info *info)
 {
 	struct single_step_state *step_state = info->step_state;
 
-#ifdef CONFIG_HARDWALL
-	/*
-	 * We free a thread_info from the context of the task that has
-	 * been scheduled next, so the original task is already dead.
-	 * Calling deactivate here just frees up the data structures.
-	 * If the task we're freeing held the last reference to a
-	 * hardwall fd, it would have been released prior to this point
-	 * anyway via exit_files(), and the hardwall_task.info pointers
-	 * would be NULL by now.
-	 */
-	hardwall_deactivate_all(info->task);
-#endif
-
 	if (step_state) {
 
 		/*
@@ -160,6 +148,14 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 	 */
 	task_thread_info(p)->step_state = NULL;
 
+#ifdef __tilegx__
+	/*
+	 * Do not clone unalign jit fixup from the parent; each thread
+	 * must allocate its own on demand.
+	 */
+	task_thread_info(p)->unalign_jit_base = NULL;
+#endif
+
 	/*
 	 * Copy the registers onto the kernel stack so the
 	 * return-from-interrupt code will reload it into registers.
@@ -191,16 +187,8 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 	memset(&p->thread.dma_async_tlb, 0, sizeof(struct async_tlb));
 #endif
 
-#if CHIP_HAS_SN_PROC()
-	/* Likewise, the new thread is not running static processor code. */
-	p->thread.sn_proc_running = 0;
-	memset(&p->thread.sn_async_tlb, 0, sizeof(struct async_tlb));
-#endif
-
-#if CHIP_HAS_PROC_STATUS_SPR()
 	/* New thread has its miscellaneous processor state bits clear. */
 	p->thread.proc_status = 0;
-#endif
 
 #ifdef CONFIG_HARDWALL
 	/* New thread does not own any networks. */
@@ -218,19 +206,32 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 	return 0;
 }
 
+int set_unalign_ctl(struct task_struct *tsk, unsigned int val)
+{
+	task_thread_info(tsk)->align_ctl = val;
+	return 0;
+}
+
+int get_unalign_ctl(struct task_struct *tsk, unsigned long adr)
+{
+	return put_user(task_thread_info(tsk)->align_ctl,
+			(unsigned int __user *)adr);
+}
+
+static struct task_struct corrupt_current = { .comm = "<corrupt>" };
+
 /*
  * Return "current" if it looks plausible, or else a pointer to a dummy.
  * This can be helpful if we are just trying to emit a clean panic.
  */
 struct task_struct *validate_current(void)
 {
-	static struct task_struct corrupt = { .comm = "<corrupt>" };
 	struct task_struct *tsk = current;
 	if (unlikely((unsigned long)tsk < PAGE_OFFSET ||
 		     (high_memory && (void *)tsk > high_memory) ||
 		     ((unsigned long)tsk & (__alignof__(*tsk) - 1)) != 0)) {
 		pr_err("Corrupt 'current' %p (sp %#lx)\n", tsk, stack_pointer);
-		tsk = &corrupt;
+		tsk = &corrupt_current;
 	}
 	return tsk;
 }
@@ -369,15 +370,11 @@ static void save_arch_state(struct thread_struct *t)
 	t->system_save[2] = __insn_mfspr(SPR_SYSTEM_SAVE_0_2);
 	t->system_save[3] = __insn_mfspr(SPR_SYSTEM_SAVE_0_3);
 	t->intctrl_0 = __insn_mfspr(SPR_INTCTRL_0_STATUS);
-#if CHIP_HAS_PROC_STATUS_SPR()
 	t->proc_status = __insn_mfspr(SPR_PROC_STATUS);
-#endif
 #if !CHIP_HAS_FIXED_INTVEC_BASE()
 	t->interrupt_vector_base = __insn_mfspr(SPR_INTERRUPT_VECTOR_BASE_0);
 #endif
-#if CHIP_HAS_TILE_RTF_HWM()
 	t->tile_rtf_hwm = __insn_mfspr(SPR_TILE_RTF_HWM);
-#endif
 #if CHIP_HAS_DSTREAM_PF()
 	t->dstream_pf = __insn_mfspr(SPR_DSTREAM_PF);
 #endif
@@ -398,15 +395,11 @@ static void restore_arch_state(const struct thread_struct *t)
 	__insn_mtspr(SPR_SYSTEM_SAVE_0_2, t->system_save[2]);
 	__insn_mtspr(SPR_SYSTEM_SAVE_0_3, t->system_save[3]);
 	__insn_mtspr(SPR_INTCTRL_0_STATUS, t->intctrl_0);
-#if CHIP_HAS_PROC_STATUS_SPR()
 	__insn_mtspr(SPR_PROC_STATUS, t->proc_status);
-#endif
 #if !CHIP_HAS_FIXED_INTVEC_BASE()
 	__insn_mtspr(SPR_INTERRUPT_VECTOR_BASE_0, t->interrupt_vector_base);
 #endif
-#if CHIP_HAS_TILE_RTF_HWM()
 	__insn_mtspr(SPR_TILE_RTF_HWM, t->tile_rtf_hwm);
-#endif
 #if CHIP_HAS_DSTREAM_PF()
 	__insn_mtspr(SPR_DSTREAM_PF, t->dstream_pf);
 #endif
@@ -415,26 +408,11 @@ static void restore_arch_state(const struct thread_struct *t)
 
 void _prepare_arch_switch(struct task_struct *next)
 {
-#if CHIP_HAS_SN_PROC()
-	int snctl;
-#endif
 #if CHIP_HAS_TILE_DMA()
 	struct tile_dma_state *dma = &current->thread.tile_dma_state;
 	if (dma->enabled)
 		save_tile_dma_state(dma);
 #endif
-#if CHIP_HAS_SN_PROC()
-	/*
-	 * Suspend the static network processor if it was running.
-	 * We do not suspend the fabric itself, just like we don't
-	 * try to suspend the UDN.
-	 */
-	snctl = __insn_mfspr(SPR_SNCTL);
-	current->thread.sn_proc_running =
-		(snctl & SPR_SNCTL__FRZPROC_MASK) == 0;
-	if (current->thread.sn_proc_running)
-		__insn_mtspr(SPR_SNCTL, snctl | SPR_SNCTL__FRZPROC_MASK);
-#endif
 }
 
 
@@ -462,17 +440,6 @@ struct task_struct *__sched _switch_to(struct task_struct *prev,
 	/* Restore other arch state. */
 	restore_arch_state(&next->thread);
 
-#if CHIP_HAS_SN_PROC()
-	/*
-	 * Restart static network processor in the new process
-	 * if it was running before.
-	 */
-	if (next->thread.sn_proc_running) {
-		int snctl = __insn_mfspr(SPR_SNCTL);
-		__insn_mtspr(SPR_SNCTL, snctl & ~SPR_SNCTL__FRZPROC_MASK);
-	}
-#endif
-
 #ifdef CONFIG_HARDWALL
 	/* Enable or disable access to the network registers appropriately. */
 	hardwall_switch_tasks(prev, next);
@@ -514,7 +481,7 @@ int do_work_pending(struct pt_regs *regs, u32 thread_info_flags)
 		schedule();
 		return 1;
 	}
-#if CHIP_HAS_TILE_DMA() || CHIP_HAS_SN_PROC()
+#if CHIP_HAS_TILE_DMA()
 	if (thread_info_flags & _TIF_ASYNC_TLB) {
 		do_async_page_fault(regs);
 		return 1;
@@ -564,7 +531,15 @@ void flush_thread(void)
  */
 void exit_thread(void)
 {
-	/* Nothing */
+#ifdef CONFIG_HARDWALL
+	/*
+	 * Remove the task from the list of tasks that are associated
+	 * with any live hardwalls.  (If the task that is exiting held
+	 * the last reference to a hardwall fd, it would already have
+	 * been released and deactivated at this point.)
+	 */
+	hardwall_deactivate_all(current);
+#endif
 }
 
 void show_regs(struct pt_regs *regs)
@@ -573,23 +548,24 @@ void show_regs(struct pt_regs *regs)
 	int i;
 
 	pr_err("\n");
-	show_regs_print_info(KERN_ERR);
+	if (tsk != &corrupt_current)
+		show_regs_print_info(KERN_ERR);
 #ifdef __tilegx__
-	for (i = 0; i < 51; i += 3)
+	for (i = 0; i < 17; i++)
 		pr_err(" r%-2d: "REGFMT" r%-2d: "REGFMT" r%-2d: "REGFMT"\n",
-		       i, regs->regs[i], i+1, regs->regs[i+1],
-		       i+2, regs->regs[i+2]);
-	pr_err(" r51: "REGFMT" r52: "REGFMT" tp : "REGFMT"\n",
-	       regs->regs[51], regs->regs[52], regs->tp);
+		       i, regs->regs[i], i+18, regs->regs[i+18],
+		       i+36, regs->regs[i+36]);
+	pr_err(" r17: "REGFMT" r35: "REGFMT" tp : "REGFMT"\n",
+	       regs->regs[17], regs->regs[35], regs->tp);
 	pr_err(" sp : "REGFMT" lr : "REGFMT"\n", regs->sp, regs->lr);
 #else
-	for (i = 0; i < 52; i += 4)
+	for (i = 0; i < 13; i++)
 		pr_err(" r%-2d: "REGFMT" r%-2d: "REGFMT
 		       " r%-2d: "REGFMT" r%-2d: "REGFMT"\n",
-		       i, regs->regs[i], i+1, regs->regs[i+1],
-		       i+2, regs->regs[i+2], i+3, regs->regs[i+3]);
-	pr_err(" r52: "REGFMT" tp : "REGFMT" sp : "REGFMT" lr : "REGFMT"\n",
-	       regs->regs[52], regs->tp, regs->sp, regs->lr);
+		       i, regs->regs[i], i+14, regs->regs[i+14],
+		       i+27, regs->regs[i+27], i+40, regs->regs[i+40]);
+	pr_err(" r13: "REGFMT" tp : "REGFMT" sp : "REGFMT" lr : "REGFMT"\n",
+	       regs->regs[13], regs->tp, regs->sp, regs->lr);
 #endif
 	pr_err(" pc : "REGFMT" ex1: %ld     faultnum: %ld\n",
 	       regs->pc, regs->ex1, regs->faultnum);
diff --git a/arch/tile/kernel/ptrace.c b/arch/tile/kernel/ptrace.c
index 0f83ed4..de98c6d 100644
--- a/arch/tile/kernel/ptrace.c
+++ b/arch/tile/kernel/ptrace.c
@@ -265,6 +265,21 @@ int do_syscall_trace_enter(struct pt_regs *regs)
 
 void do_syscall_trace_exit(struct pt_regs *regs)
 {
+	long errno;
+
+	/*
+	 * The standard tile calling convention returns the value (or negative
+	 * errno) in r0, and zero (or positive errno) in r1.
+	 * It saves a couple of cycles on the hot path to do this work in
+	 * registers only as we return, rather than updating the in-memory
+	 * struct ptregs.
+	 */
+	errno = (long) regs->regs[0];
+	if (errno < 0 && errno > -4096)
+		regs->regs[1] = -errno;
+	else
+		regs->regs[1] = 0;
+
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
 		tracehook_report_syscall_exit(regs, 0);
 
@@ -272,7 +287,7 @@ void do_syscall_trace_exit(struct pt_regs *regs)
 		trace_sys_exit(regs, regs->regs[0]);
 }
 
-void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code)
+void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs)
 {
 	struct siginfo info;
 
@@ -288,5 +303,5 @@ void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code)
 /* Handle synthetic interrupt delivered only by the simulator. */
 void __kprobes do_breakpoint(struct pt_regs* regs, int fault_num)
 {
-	send_sigtrap(current, regs, fault_num);
+	send_sigtrap(current, regs);
 }
diff --git a/arch/tile/kernel/reboot.c b/arch/tile/kernel/reboot.c
index d1b5c91..6c5d2c0 100644
--- a/arch/tile/kernel/reboot.c
+++ b/arch/tile/kernel/reboot.c
@@ -27,7 +27,6 @@
 
 void machine_halt(void)
 {
-	warn_early_printk();
 	arch_local_irq_disable_all();
 	smp_send_stop();
 	hv_halt();
@@ -35,7 +34,6 @@ void machine_halt(void)
 
 void machine_power_off(void)
 {
-	warn_early_printk();
 	arch_local_irq_disable_all();
 	smp_send_stop();
 	hv_power_off();
diff --git a/arch/tile/kernel/regs_32.S b/arch/tile/kernel/regs_32.S
index c12280c..542cae1 100644
--- a/arch/tile/kernel/regs_32.S
+++ b/arch/tile/kernel/regs_32.S
@@ -20,7 +20,7 @@
 #include <asm/switch_to.h>
 
 /*
- * See <asm/system.h>; called with prev and next task_struct pointers.
+ * See <asm/switch_to.h>; called with prev and next task_struct pointers.
  * "prev" is returned in r0 for _switch_to and also for ret_from_fork.
  *
  * We want to save pc/sp in "prev", and get the new pc/sp from "next".
@@ -39,7 +39,7 @@
  */
 
 #if CALLEE_SAVED_REGS_COUNT != 24
-# error Mismatch between <asm/system.h> and kernel/entry.S
+# error Mismatch between <asm/switch_to.h> and kernel/entry.S
 #endif
 #define FRAME_SIZE ((2 + CALLEE_SAVED_REGS_COUNT) * 4)
 
diff --git a/arch/tile/kernel/regs_64.S b/arch/tile/kernel/regs_64.S
index 0829fd0..bbffcc6 100644
--- a/arch/tile/kernel/regs_64.S
+++ b/arch/tile/kernel/regs_64.S
@@ -20,7 +20,7 @@
 #include <asm/switch_to.h>
 
 /*
- * See <asm/system.h>; called with prev and next task_struct pointers.
+ * See <asm/switch_to.h>; called with prev and next task_struct pointers.
  * "prev" is returned in r0 for _switch_to and also for ret_from_fork.
  *
  * We want to save pc/sp in "prev", and get the new pc/sp from "next".
@@ -39,7 +39,7 @@
  */
 
 #if CALLEE_SAVED_REGS_COUNT != 24
-# error Mismatch between <asm/system.h> and kernel/entry.S
+# error Mismatch between <asm/switch_to.h> and kernel/entry.S
 #endif
 #define FRAME_SIZE ((2 + CALLEE_SAVED_REGS_COUNT) * 8)
 
diff --git a/arch/tile/kernel/relocate_kernel_32.S b/arch/tile/kernel/relocate_kernel_32.S
index 010b418..e44fbcf 100644
--- a/arch/tile/kernel/relocate_kernel_32.S
+++ b/arch/tile/kernel/relocate_kernel_32.S
@@ -20,15 +20,6 @@
 #include <asm/page.h>
 #include <hv/hypervisor.h>
 
-#define ___hvb	MEM_SV_INTRPT + HV_GLUE_START_CPA
-
-#define ___hv_dispatch(f) (___hvb + (HV_DISPATCH_ENTRY_SIZE * f))
-
-#define ___hv_console_putc ___hv_dispatch(HV_DISPATCH_CONSOLE_PUTC)
-#define ___hv_halt         ___hv_dispatch(HV_DISPATCH_HALT)
-#define ___hv_reexec       ___hv_dispatch(HV_DISPATCH_REEXEC)
-#define ___hv_flush_remote ___hv_dispatch(HV_DISPATCH_FLUSH_REMOTE)
-
 #undef RELOCATE_NEW_KERNEL_VERBOSE
 
 STD_ENTRY(relocate_new_kernel)
@@ -43,8 +34,8 @@ STD_ENTRY(relocate_new_kernel)
 	addi	sp, sp, -8
 	/* we now have a stack (whether we need one or not) */
 
-	moveli	r40, lo16(___hv_console_putc)
-	auli	r40, r40, ha16(___hv_console_putc)
+	moveli	r40, lo16(hv_console_putc)
+	auli	r40, r40, ha16(hv_console_putc)
 
 #ifdef RELOCATE_NEW_KERNEL_VERBOSE
 	moveli	r0, 'r'
@@ -86,7 +77,6 @@ STD_ENTRY(relocate_new_kernel)
 	move	r30, sp
 	addi	sp, sp, -8
 
-#if CHIP_HAS_CBOX_HOME_MAP()
 	/*
 	 * On TILEPro, we need to flush all tiles' caches, since we may
 	 * have been doing hash-for-home caching there.  Note that we
@@ -114,15 +104,14 @@ STD_ENTRY(relocate_new_kernel)
 	}
 	{
 	 move	r8, zero	 /* asids */
-	 moveli	r20, lo16(___hv_flush_remote)
+	 moveli	r20, lo16(hv_flush_remote)
 	}
 	{
 	 move	r9, zero	 /* asidcount */
-	 auli	r20, r20, ha16(___hv_flush_remote)
+	 auli	r20, r20, ha16(hv_flush_remote)
 	}
 
 	jalr	r20
-#endif
 
 	/* r33 is destination pointer, default to zero */
 
@@ -175,8 +164,8 @@ STD_ENTRY(relocate_new_kernel)
 	move	r0, r32
 	moveli	r1, 0		/* arg to hv_reexec is 64 bits */
 
-	moveli	r41, lo16(___hv_reexec)
-	auli	r41, r41, ha16(___hv_reexec)
+	moveli	r41, lo16(hv_reexec)
+	auli	r41, r41, ha16(hv_reexec)
 
 	jalr	r41
 
@@ -267,8 +256,8 @@ STD_ENTRY(relocate_new_kernel)
 	moveli	r0, '\n'
 	jalr	r40
 .Lhalt:
-	moveli	r41, lo16(___hv_halt)
-	auli	r41, r41, ha16(___hv_halt)
+	moveli	r41, lo16(hv_halt)
+	auli	r41, r41, ha16(hv_halt)
 
 	jalr	r41
 	STD_ENDPROC(relocate_new_kernel)
diff --git a/arch/tile/kernel/relocate_kernel_64.S b/arch/tile/kernel/relocate_kernel_64.S
index 1c09a4f..d9d8cf6 100644
--- a/arch/tile/kernel/relocate_kernel_64.S
+++ b/arch/tile/kernel/relocate_kernel_64.S
@@ -34,11 +34,11 @@ STD_ENTRY(relocate_new_kernel)
 	addi	sp, sp, -8
 	/* we now have a stack (whether we need one or not) */
 
+#ifdef RELOCATE_NEW_KERNEL_VERBOSE
 	moveli	r40, hw2_last(hv_console_putc)
 	shl16insli r40, r40, hw1(hv_console_putc)
 	shl16insli r40, r40, hw0(hv_console_putc)
 
-#ifdef RELOCATE_NEW_KERNEL_VERBOSE
 	moveli	r0, 'r'
 	jalr	r40
 
@@ -78,7 +78,6 @@ STD_ENTRY(relocate_new_kernel)
 	move	r30, sp
 	addi	sp, sp, -16
 
-#if CHIP_HAS_CBOX_HOME_MAP()
 	/*
 	 * On TILE-GX, we need to flush all tiles' caches, since we may
 	 * have been doing hash-for-home caching there.  Note that we
@@ -116,7 +115,6 @@ STD_ENTRY(relocate_new_kernel)
 	shl16insli	r20, r20, hw0(hv_flush_remote)
 
 	jalr	r20
-#endif
 
 	/* r33 is destination pointer, default to zero */
 
@@ -176,10 +174,12 @@ STD_ENTRY(relocate_new_kernel)
 
 	/* we should not get here */
 
+#ifdef RELOCATE_NEW_KERNEL_VERBOSE
 	moveli	r0, '?'
 	jalr	r40
 	moveli	r0, '\n'
 	jalr	r40
+#endif
 
 	j	.Lhalt
 
@@ -237,7 +237,9 @@ STD_ENTRY(relocate_new_kernel)
 	j	.Lloop
 
 
-.Lerr:	moveli	r0, 'e'
+.Lerr:
+#ifdef RELOCATE_NEW_KERNEL_VERBOSE
+	moveli	r0, 'e'
 	jalr	r40
 	moveli	r0, 'r'
 	jalr	r40
@@ -245,6 +247,7 @@ STD_ENTRY(relocate_new_kernel)
 	jalr	r40
 	moveli	r0, '\n'
 	jalr	r40
+#endif
 .Lhalt:
 	moveli r41, hw2_last(hv_halt)
 	shl16insli r41, r41, hw1(hv_halt)
diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c
index eceb834..74c9172 100644
--- a/arch/tile/kernel/setup.c
+++ b/arch/tile/kernel/setup.c
@@ -154,6 +154,65 @@ static int __init setup_maxnodemem(char *str)
 }
 early_param("maxnodemem", setup_maxnodemem);
 
+struct memmap_entry {
+	u64 addr;	/* start of memory segment */
+	u64 size;	/* size of memory segment */
+};
+static struct memmap_entry memmap_map[64];
+static int memmap_nr;
+
+static void add_memmap_region(u64 addr, u64 size)
+{
+	if (memmap_nr >= ARRAY_SIZE(memmap_map)) {
+		pr_err("Ooops! Too many entries in the memory map!\n");
+		return;
+	}
+	memmap_map[memmap_nr].addr = addr;
+	memmap_map[memmap_nr].size = size;
+	memmap_nr++;
+}
+
+static int __init setup_memmap(char *p)
+{
+	char *oldp;
+	u64 start_at, mem_size;
+
+	if (!p)
+		return -EINVAL;
+
+	if (!strncmp(p, "exactmap", 8)) {
+		pr_err("\"memmap=exactmap\" not valid on tile\n");
+		return 0;
+	}
+
+	oldp = p;
+	mem_size = memparse(p, &p);
+	if (p == oldp)
+		return -EINVAL;
+
+	if (*p == '@') {
+		pr_err("\"memmap=nn@ss\" (force RAM) invalid on tile\n");
+	} else if (*p == '#') {
+		pr_err("\"memmap=nn#ss\" (force ACPI data) invalid on tile\n");
+	} else if (*p == '$') {
+		start_at = memparse(p+1, &p);
+		add_memmap_region(start_at, mem_size);
+	} else {
+		if (mem_size == 0)
+			return -EINVAL;
+		maxmem_pfn = (mem_size >> HPAGE_SHIFT) <<
+			(HPAGE_SHIFT - PAGE_SHIFT);
+	}
+	return *p == '\0' ? 0 : -EINVAL;
+}
+early_param("memmap", setup_memmap);
+
+static int __init setup_mem(char *str)
+{
+	return setup_maxmem(str);
+}
+early_param("mem", setup_mem);  /* compatibility with x86 */
+
 static int __init setup_isolnodes(char *str)
 {
 	char buf[MAX_NUMNODES * 5];
@@ -209,7 +268,7 @@ early_param("vmalloc", parse_vmalloc);
 /*
  * Determine for each controller where its lowmem is mapped and how much of
  * it is mapped there.  On controller zero, the first few megabytes are
- * already mapped in as code at MEM_SV_INTRPT, so in principle we could
+ * already mapped in as code at MEM_SV_START, so in principle we could
  * start our data mappings higher up, but for now we don't bother, to avoid
  * additional confusion.
  *
@@ -614,11 +673,12 @@ static void __init setup_bootmem_allocator_node(int i)
 	/*
 	 * Throw away any memory aliased by the PCI region.
 	 */
-	if (pci_reserve_start_pfn < end && pci_reserve_end_pfn > start)
-		reserve_bootmem(PFN_PHYS(pci_reserve_start_pfn),
-				PFN_PHYS(pci_reserve_end_pfn -
-					 pci_reserve_start_pfn),
+	if (pci_reserve_start_pfn < end && pci_reserve_end_pfn > start) {
+		start = max(pci_reserve_start_pfn, start);
+		end = min(pci_reserve_end_pfn, end);
+		reserve_bootmem(PFN_PHYS(start), PFN_PHYS(end - start),
 				BOOTMEM_EXCLUSIVE);
+	}
 #endif
 }
 
@@ -628,6 +688,31 @@ static void __init setup_bootmem_allocator(void)
 	for (i = 0; i < MAX_NUMNODES; ++i)
 		setup_bootmem_allocator_node(i);
 
+	/* Reserve any memory excluded by "memmap" arguments. */
+	for (i = 0; i < memmap_nr; ++i) {
+		struct memmap_entry *m = &memmap_map[i];
+		reserve_bootmem(m->addr, m->size, 0);
+	}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (initrd_start) {
+		/* Make sure the initrd memory region is not modified. */
+		if (reserve_bootmem(initrd_start, initrd_end - initrd_start,
+				    BOOTMEM_EXCLUSIVE)) {
+			pr_crit("The initrd memory region has been polluted. Disabling it.\n");
+			initrd_start = 0;
+			initrd_end = 0;
+		} else {
+			/*
+			 * Translate initrd_start & initrd_end from PA to VA for
+			 * future access.
+			 */
+			initrd_start += PAGE_OFFSET;
+			initrd_end += PAGE_OFFSET;
+		}
+	}
+#endif
+
 #ifdef CONFIG_KEXEC
 	if (crashk_res.start != crashk_res.end)
 		reserve_bootmem(crashk_res.start, resource_size(&crashk_res), 0);
@@ -961,9 +1046,6 @@ void setup_cpu(int boot)
 	arch_local_irq_unmask(INT_DMATLB_MISS);
 	arch_local_irq_unmask(INT_DMATLB_ACCESS);
 #endif
-#if CHIP_HAS_SN_PROC()
-	arch_local_irq_unmask(INT_SNITLB_MISS);
-#endif
 #ifdef __tilegx__
 	arch_local_irq_unmask(INT_SINGLE_STEP_K);
 #endif
@@ -978,10 +1060,6 @@ void setup_cpu(int boot)
 	/* Static network is not restricted. */
 	__insn_mtspr(SPR_MPL_SN_ACCESS_SET_0, 1);
 #endif
-#if CHIP_HAS_SN_PROC()
-	__insn_mtspr(SPR_MPL_SN_NOTIFY_SET_0, 1);
-	__insn_mtspr(SPR_MPL_SN_CPL_SET_0, 1);
-#endif
 
 	/*
 	 * Set the MPL for interrupt control 0 & 1 to the corresponding
@@ -1029,6 +1107,10 @@ static void __init load_hv_initrd(void)
 	int fd, rc;
 	void *initrd;
 
+	/* If initrd has already been set, skip initramfs file in hvfs. */
+	if (initrd_start)
+		return;
+
 	fd = hv_fs_findfile((HV_VirtAddr) initramfs_file);
 	if (fd == HV_ENOENT) {
 		if (set_initramfs_file) {
@@ -1067,6 +1149,25 @@ void __init free_initrd_mem(unsigned long begin, unsigned long end)
 	free_bootmem(__pa(begin), end - begin);
 }
 
+static int __init setup_initrd(char *str)
+{
+	char *endp;
+	unsigned long initrd_size;
+
+	initrd_size = str ? simple_strtoul(str, &endp, 0) : 0;
+	if (initrd_size == 0 || *endp != '@')
+		return -EINVAL;
+
+	initrd_start = simple_strtoul(endp+1, &endp, 0);
+	if (initrd_start == 0)
+		return -EINVAL;
+
+	initrd_end = initrd_start + initrd_size;
+
+	return 0;
+}
+early_param("initrd", setup_initrd);
+
 #else
 static inline void load_hv_initrd(void) {}
 #endif /* CONFIG_BLK_DEV_INITRD */
@@ -1134,7 +1235,7 @@ static void __init validate_va(void)
 #ifndef __tilegx__   /* FIXME: GX: probably some validation relevant here */
 	/*
 	 * Similarly, make sure we're only using allowed VAs.
-	 * We assume we can contiguously use MEM_USER_INTRPT .. MEM_HV_INTRPT,
+	 * We assume we can contiguously use MEM_USER_INTRPT .. MEM_HV_START,
 	 * and 0 .. KERNEL_HIGH_VADDR.
 	 * In addition, make sure we CAN'T use the end of memory, since
 	 * we use the last chunk of each pgd for the pgd_list.
@@ -1149,7 +1250,7 @@ static void __init validate_va(void)
 		if (range.size == 0)
 			break;
 		if (range.start <= MEM_USER_INTRPT &&
-		    range.start + range.size >= MEM_HV_INTRPT)
+		    range.start + range.size >= MEM_HV_START)
 			user_kernel_ok = 1;
 		if (range.start == 0)
 			max_va = range.size;
@@ -1167,8 +1268,7 @@ static void __init validate_va(void)
 	if ((long)VMALLOC_START >= 0)
 		early_panic(
 			"Linux VMALLOC region below the 2GB line (%#lx)!\n"
-			"Reconfigure the kernel with fewer NR_HUGE_VMAPS\n"
-			"or smaller VMALLOC_RESERVE.\n",
+			"Reconfigure the kernel with smaller VMALLOC_RESERVE.\n",
 			VMALLOC_START);
 #endif
 }
@@ -1183,7 +1283,6 @@ static void __init validate_va(void)
 struct cpumask __write_once cpu_lotar_map;
 EXPORT_SYMBOL(cpu_lotar_map);
 
-#if CHIP_HAS_CBOX_HOME_MAP()
 /*
  * hash_for_home_map lists all the tiles that hash-for-home data
  * will be cached on.  Note that this may includes tiles that are not
@@ -1193,7 +1292,6 @@ EXPORT_SYMBOL(cpu_lotar_map);
  */
 struct cpumask hash_for_home_map;
 EXPORT_SYMBOL(hash_for_home_map);
-#endif
 
 /*
  * cpu_cacheable_map lists all the cpus whose caches the hypervisor can
@@ -1286,7 +1384,6 @@ static void __init setup_cpu_maps(void)
 		cpu_lotar_map = *cpu_possible_mask;
 	}
 
-#if CHIP_HAS_CBOX_HOME_MAP()
 	/* Retrieve set of CPUs used for hash-for-home caching */
 	rc = hv_inquire_tiles(HV_INQ_TILES_HFH_CACHE,
 			      (HV_VirtAddr) hash_for_home_map.bits,
@@ -1294,9 +1391,6 @@ static void __init setup_cpu_maps(void)
 	if (rc < 0)
 		early_panic("hv_inquire_tiles(HFH_CACHE) failed: rc %d\n", rc);
 	cpumask_or(&cpu_cacheable_map, cpu_possible_mask, &hash_for_home_map);
-#else
-	cpu_cacheable_map = *cpu_possible_mask;
-#endif
 }
 
 
@@ -1492,7 +1586,7 @@ void __init setup_per_cpu_areas(void)
 
 			/* Update the vmalloc mapping and page home. */
 			unsigned long addr = (unsigned long)ptr + i;
-			pte_t *ptep = virt_to_pte(NULL, addr);
+			pte_t *ptep = virt_to_kpte(addr);
 			pte_t pte = *ptep;
 			BUG_ON(pfn != pte_pfn(pte));
 			pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_TILE_L3);
@@ -1501,12 +1595,12 @@ void __init setup_per_cpu_areas(void)
 
 			/* Update the lowmem mapping for consistency. */
 			lowmem_va = (unsigned long)pfn_to_kaddr(pfn);
-			ptep = virt_to_pte(NULL, lowmem_va);
+			ptep = virt_to_kpte(lowmem_va);
 			if (pte_huge(*ptep)) {
 				printk(KERN_DEBUG "early shatter of huge page"
 				       " at %#lx\n", lowmem_va);
 				shatter_pmd((pmd_t *)ptep);
-				ptep = virt_to_pte(NULL, lowmem_va);
+				ptep = virt_to_kpte(lowmem_va);
 				BUG_ON(pte_huge(*ptep));
 			}
 			BUG_ON(pfn != pte_pfn(*ptep));
@@ -1548,6 +1642,8 @@ insert_non_bus_resource(void)
 {
 	struct resource *res =
 		kzalloc(sizeof(struct resource), GFP_ATOMIC);
+	if (!res)
+		return NULL;
 	res->name = "Non-Bus Physical Address Space";
 	res->start = (1ULL << 32);
 	res->end = -1LL;
@@ -1561,11 +1657,13 @@ insert_non_bus_resource(void)
 #endif
 
 static struct resource* __init
-insert_ram_resource(u64 start_pfn, u64 end_pfn)
+insert_ram_resource(u64 start_pfn, u64 end_pfn, bool reserved)
 {
 	struct resource *res =
 		kzalloc(sizeof(struct resource), GFP_ATOMIC);
-	res->name = "System RAM";
+	if (!res)
+		return NULL;
+	res->name = reserved ? "Reserved" : "System RAM";
 	res->start = start_pfn << PAGE_SHIFT;
 	res->end = (end_pfn << PAGE_SHIFT) - 1;
 	res->flags = IORESOURCE_BUSY | IORESOURCE_MEM;
@@ -1585,7 +1683,7 @@ insert_ram_resource(u64 start_pfn, u64 end_pfn)
 static int __init request_standard_resources(void)
 {
 	int i;
-	enum { CODE_DELTA = MEM_SV_INTRPT - PAGE_OFFSET };
+	enum { CODE_DELTA = MEM_SV_START - PAGE_OFFSET };
 
 #if defined(CONFIG_PCI) && !defined(__tilegx__)
 	insert_non_bus_resource();
@@ -1600,11 +1698,11 @@ static int __init request_standard_resources(void)
 		    end_pfn > pci_reserve_start_pfn) {
 			if (end_pfn > pci_reserve_end_pfn)
 				insert_ram_resource(pci_reserve_end_pfn,
-						     end_pfn);
+						    end_pfn, 0);
 			end_pfn = pci_reserve_start_pfn;
 		}
 #endif
-		insert_ram_resource(start_pfn, end_pfn);
+		insert_ram_resource(start_pfn, end_pfn, 0);
 	}
 
 	code_resource.start = __pa(_text - CODE_DELTA);
@@ -1615,6 +1713,13 @@ static int __init request_standard_resources(void)
 	insert_resource(&iomem_resource, &code_resource);
 	insert_resource(&iomem_resource, &data_resource);
 
+	/* Mark any "memmap" regions busy for the resource manager. */
+	for (i = 0; i < memmap_nr; ++i) {
+		struct memmap_entry *m = &memmap_map[i];
+		insert_ram_resource(PFN_DOWN(m->addr),
+				    PFN_UP(m->addr + m->size - 1), 1);
+	}
+
 #ifdef CONFIG_KEXEC
 	insert_resource(&iomem_resource, &crashk_res);
 #endif
diff --git a/arch/tile/kernel/signal.c b/arch/tile/kernel/signal.c
index 9531845b..2d1dbf3 100644
--- a/arch/tile/kernel/signal.c
+++ b/arch/tile/kernel/signal.c
@@ -33,6 +33,7 @@
 #include <asm/ucontext.h>
 #include <asm/sigframe.h>
 #include <asm/syscalls.h>
+#include <asm/vdso.h>
 #include <arch/interrupts.h>
 
 #define DEBUG_SIG 0
@@ -190,7 +191,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	if (err)
 		goto give_sigsegv;
 
-	restorer = VDSO_BASE;
+	restorer = VDSO_SYM(&__vdso_rt_sigreturn);
 	if (ka->sa.sa_flags & SA_RESTORER)
 		restorer = (unsigned long) ka->sa.sa_restorer;
 
diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c
index 27742e8..de07fa7 100644
--- a/arch/tile/kernel/single_step.c
+++ b/arch/tile/kernel/single_step.c
@@ -12,41 +12,30 @@
  *   more details.
  *
  * A code-rewriter that enables instruction single-stepping.
- * Derived from iLib's single-stepping code.
  */
 
-#ifndef __tilegx__   /* Hardware support for single step unavailable. */
-
-/* These functions are only used on the TILE platform */
+#include <linux/smp.h>
+#include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/thread_info.h>
 #include <linux/uaccess.h>
 #include <linux/mman.h>
 #include <linux/types.h>
 #include <linux/err.h>
+#include <linux/prctl.h>
 #include <asm/cacheflush.h>
+#include <asm/traps.h>
+#include <asm/uaccess.h>
 #include <asm/unaligned.h>
 #include <arch/abi.h>
+#include <arch/spr_def.h>
 #include <arch/opcode.h>
 
-#define signExtend17(val) sign_extend((val), 17)
-#define TILE_X1_MASK (0xffffffffULL << 31)
-
-int unaligned_printk;
 
-static int __init setup_unaligned_printk(char *str)
-{
-	long val;
-	if (strict_strtol(str, 0, &val) != 0)
-		return 0;
-	unaligned_printk = val;
-	pr_info("Printk for each unaligned data accesses is %s\n",
-		unaligned_printk ? "enabled" : "disabled");
-	return 1;
-}
-__setup("unaligned_printk=", setup_unaligned_printk);
+#ifndef __tilegx__   /* Hardware support for single step unavailable. */
 
-unsigned int unaligned_fixup_count;
+#define signExtend17(val) sign_extend((val), 17)
+#define TILE_X1_MASK (0xffffffffULL << 31)
 
 enum mem_op {
 	MEMOP_NONE,
@@ -56,12 +45,13 @@ enum mem_op {
 	MEMOP_STORE_POSTINCR
 };
 
-static inline tile_bundle_bits set_BrOff_X1(tile_bundle_bits n, s32 offset)
+static inline tilepro_bundle_bits set_BrOff_X1(tilepro_bundle_bits n,
+	s32 offset)
 {
-	tile_bundle_bits result;
+	tilepro_bundle_bits result;
 
 	/* mask out the old offset */
-	tile_bundle_bits mask = create_BrOff_X1(-1);
+	tilepro_bundle_bits mask = create_BrOff_X1(-1);
 	result = n & (~mask);
 
 	/* or in the new offset */
@@ -70,10 +60,11 @@ static inline tile_bundle_bits set_BrOff_X1(tile_bundle_bits n, s32 offset)
 	return result;
 }
 
-static inline tile_bundle_bits move_X1(tile_bundle_bits n, int dest, int src)
+static inline tilepro_bundle_bits move_X1(tilepro_bundle_bits n, int dest,
+	int src)
 {
-	tile_bundle_bits result;
-	tile_bundle_bits op;
+	tilepro_bundle_bits result;
+	tilepro_bundle_bits op;
 
 	result = n & (~TILE_X1_MASK);
 
@@ -87,13 +78,13 @@ static inline tile_bundle_bits move_X1(tile_bundle_bits n, int dest, int src)
 	return result;
 }
 
-static inline tile_bundle_bits nop_X1(tile_bundle_bits n)
+static inline tilepro_bundle_bits nop_X1(tilepro_bundle_bits n)
 {
 	return move_X1(n, TREG_ZERO, TREG_ZERO);
 }
 
-static inline tile_bundle_bits addi_X1(
-	tile_bundle_bits n, int dest, int src, int imm)
+static inline tilepro_bundle_bits addi_X1(
+	tilepro_bundle_bits n, int dest, int src, int imm)
 {
 	n &= ~TILE_X1_MASK;
 
@@ -107,15 +98,26 @@ static inline tile_bundle_bits addi_X1(
 	return n;
 }
 
-static tile_bundle_bits rewrite_load_store_unaligned(
+static tilepro_bundle_bits rewrite_load_store_unaligned(
 	struct single_step_state *state,
-	tile_bundle_bits bundle,
+	tilepro_bundle_bits bundle,
 	struct pt_regs *regs,
 	enum mem_op mem_op,
 	int size, int sign_ext)
 {
 	unsigned char __user *addr;
 	int val_reg, addr_reg, err, val;
+	int align_ctl;
+
+	align_ctl = unaligned_fixup;
+	switch (task_thread_info(current)->align_ctl) {
+	case PR_UNALIGN_NOPRINT:
+		align_ctl = 1;
+		break;
+	case PR_UNALIGN_SIGBUS:
+		align_ctl = 0;
+		break;
+	}
 
 	/* Get address and value registers */
 	if (bundle & TILEPRO_BUNDLE_Y_ENCODING_MASK) {
@@ -160,7 +162,7 @@ static tile_bundle_bits rewrite_load_store_unaligned(
 	 * tilepro hardware would be doing, if it could provide us with the
 	 * actual bad address in an SPR, which it doesn't.
 	 */
-	if (unaligned_fixup == 0) {
+	if (align_ctl == 0) {
 		siginfo_t info = {
 			.si_signo = SIGBUS,
 			.si_code = BUS_ADRALN,
@@ -209,14 +211,14 @@ static tile_bundle_bits rewrite_load_store_unaligned(
 
 	if (err) {
 		siginfo_t info = {
-			.si_signo = SIGSEGV,
-			.si_code = SEGV_MAPERR,
+			.si_signo = SIGBUS,
+			.si_code = BUS_ADRALN,
 			.si_addr = addr
 		};
-		trace_unhandled_signal("segfault", regs,
-				       (unsigned long)addr, SIGSEGV);
+		trace_unhandled_signal("bad address for unaligned fixup", regs,
+				       (unsigned long)addr, SIGBUS);
 		force_sig_info(info.si_signo, &info, current);
-		return (tile_bundle_bits) 0;
+		return (tilepro_bundle_bits) 0;
 	}
 
 	if (unaligned_printk || unaligned_fixup_count == 0) {
@@ -285,7 +287,7 @@ void single_step_execve(void)
 	ti->step_state = NULL;
 }
 
-/**
+/*
  * single_step_once() - entry point when single stepping has been triggered.
  * @regs: The machine register state
  *
@@ -304,20 +306,31 @@ void single_step_execve(void)
  */
 void single_step_once(struct pt_regs *regs)
 {
-	extern tile_bundle_bits __single_step_ill_insn;
-	extern tile_bundle_bits __single_step_j_insn;
-	extern tile_bundle_bits __single_step_addli_insn;
-	extern tile_bundle_bits __single_step_auli_insn;
+	extern tilepro_bundle_bits __single_step_ill_insn;
+	extern tilepro_bundle_bits __single_step_j_insn;
+	extern tilepro_bundle_bits __single_step_addli_insn;
+	extern tilepro_bundle_bits __single_step_auli_insn;
 	struct thread_info *info = (void *)current_thread_info();
 	struct single_step_state *state = info->step_state;
 	int is_single_step = test_ti_thread_flag(info, TIF_SINGLESTEP);
-	tile_bundle_bits __user *buffer, *pc;
-	tile_bundle_bits bundle;
+	tilepro_bundle_bits __user *buffer, *pc;
+	tilepro_bundle_bits bundle;
 	int temp_reg;
 	int target_reg = TREG_LR;
 	int err;
 	enum mem_op mem_op = MEMOP_NONE;
 	int size = 0, sign_ext = 0;  /* happy compiler */
+	int align_ctl;
+
+	align_ctl = unaligned_fixup;
+	switch (task_thread_info(current)->align_ctl) {
+	case PR_UNALIGN_NOPRINT:
+		align_ctl = 1;
+		break;
+	case PR_UNALIGN_SIGBUS:
+		align_ctl = 0;
+		break;
+	}
 
 	asm(
 "    .pushsection .rodata.single_step\n"
@@ -390,7 +403,7 @@ void single_step_once(struct pt_regs *regs)
 	if (regs->faultnum == INT_SWINT_1)
 		regs->pc -= 8;
 
-	pc = (tile_bundle_bits __user *)(regs->pc);
+	pc = (tilepro_bundle_bits __user *)(regs->pc);
 	if (get_user(bundle, pc) != 0) {
 		pr_err("Couldn't read instruction at %p trying to step\n", pc);
 		return;
@@ -533,7 +546,6 @@ void single_step_once(struct pt_regs *regs)
 			}
 			break;
 
-#if CHIP_HAS_WH64()
 		/* postincrement operations */
 		case IMM_0_OPCODE_X1:
 			switch (get_ImmOpcodeExtension_X1(bundle)) {
@@ -568,7 +580,6 @@ void single_step_once(struct pt_regs *regs)
 				break;
 			}
 			break;
-#endif /* CHIP_HAS_WH64() */
 		}
 
 		if (state->update) {
@@ -627,9 +638,9 @@ void single_step_once(struct pt_regs *regs)
 
 	/*
 	 * Check if we need to rewrite an unaligned load/store.
-	 * Returning zero is a special value meaning we need to SIGSEGV.
+	 * Returning zero is a special value meaning we generated a signal.
 	 */
-	if (mem_op != MEMOP_NONE && unaligned_fixup >= 0) {
+	if (mem_op != MEMOP_NONE && align_ctl >= 0) {
 		bundle = rewrite_load_store_unaligned(state, bundle, regs,
 						      mem_op, size, sign_ext);
 		if (bundle == 0)
@@ -668,9 +679,9 @@ void single_step_once(struct pt_regs *regs)
 		}
 
 		/* End with a jump back to the next instruction */
-		delta = ((regs->pc + TILE_BUNDLE_SIZE_IN_BYTES) -
+		delta = ((regs->pc + TILEPRO_BUNDLE_SIZE_IN_BYTES) -
 			(unsigned long)buffer) >>
-			TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES;
+			TILEPRO_LOG2_BUNDLE_ALIGNMENT_IN_BYTES;
 		bundle = __single_step_j_insn;
 		bundle |= create_JOffLong_X1(delta);
 		err |= __put_user(bundle, buffer++);
@@ -698,9 +709,6 @@ void single_step_once(struct pt_regs *regs)
 }
 
 #else
-#include <linux/smp.h>
-#include <linux/ptrace.h>
-#include <arch/spr_def.h>
 
 static DEFINE_PER_CPU(unsigned long, ss_saved_pc);
 
@@ -743,10 +751,10 @@ void gx_singlestep_handle(struct pt_regs *regs, int fault_num)
 	} else if ((*ss_pc != regs->pc) ||
 		   (!(control & SPR_SINGLE_STEP_CONTROL_1__CANCELED_MASK))) {
 
-		ptrace_notify(SIGTRAP);
 		control |= SPR_SINGLE_STEP_CONTROL_1__CANCELED_MASK;
 		control |= SPR_SINGLE_STEP_CONTROL_1__INHIBIT_MASK;
 		__insn_mtspr(SPR_SINGLE_STEP_CONTROL_K, control);
+		send_sigtrap(current, regs);
 	}
 }
 
diff --git a/arch/tile/kernel/smp.c b/arch/tile/kernel/smp.c
index cbc73a8..01e8ab2 100644
--- a/arch/tile/kernel/smp.c
+++ b/arch/tile/kernel/smp.c
@@ -20,8 +20,13 @@
 #include <linux/irq.h>
 #include <linux/module.h>
 #include <asm/cacheflush.h>
+#include <asm/homecache.h>
 
-HV_Topology smp_topology __write_once;
+/*
+ * We write to width and height with a single store in head_NN.S,
+ * so make the variable aligned to "long".
+ */
+HV_Topology smp_topology __write_once __aligned(sizeof(long));
 EXPORT_SYMBOL(smp_topology);
 
 #if CHIP_HAS_IPI()
@@ -100,8 +105,8 @@ static void smp_start_cpu_interrupt(void)
 /* Handler to stop the current cpu. */
 static void smp_stop_cpu_interrupt(void)
 {
-	set_cpu_online(smp_processor_id(), 0);
 	arch_local_irq_disable_all();
+	set_cpu_online(smp_processor_id(), 0);
 	for (;;)
 		asm("nap; nop");
 }
@@ -167,9 +172,16 @@ static void ipi_flush_icache_range(void *info)
 void flush_icache_range(unsigned long start, unsigned long end)
 {
 	struct ipi_flush flush = { start, end };
-	preempt_disable();
-	on_each_cpu(ipi_flush_icache_range, &flush, 1);
-	preempt_enable();
+
+	/* If invoked with irqs disabled, we can not issue IPIs. */
+	if (irqs_disabled())
+		flush_remote(0, HV_FLUSH_EVICT_L1I, NULL, 0, 0, 0,
+			NULL, NULL, 0);
+	else {
+		preempt_disable();
+		on_each_cpu(ipi_flush_icache_range, &flush, 1);
+		preempt_enable();
+	}
 }
 
 
diff --git a/arch/tile/kernel/smpboot.c b/arch/tile/kernel/smpboot.c
index a535655..732e9d1 100644
--- a/arch/tile/kernel/smpboot.c
+++ b/arch/tile/kernel/smpboot.c
@@ -142,13 +142,15 @@ static struct cpumask cpu_started;
  */
 static void start_secondary(void)
 {
-	int cpuid = smp_processor_id();
+	int cpuid;
+
+	preempt_disable();
+
+	cpuid = smp_processor_id();
 
 	/* Set our thread pointer appropriately. */
 	set_my_cpu_offset(__per_cpu_offset[cpuid]);
 
-	preempt_disable();
-
 	/*
 	 * In large machines even this will slow us down, since we
 	 * will be contending for for the printk spinlock.
diff --git a/arch/tile/kernel/stack.c b/arch/tile/kernel/stack.c
index af8dfc9..c93977a 100644
--- a/arch/tile/kernel/stack.c
+++ b/arch/tile/kernel/stack.c
@@ -23,12 +23,14 @@
 #include <linux/mmzone.h>
 #include <linux/dcache.h>
 #include <linux/fs.h>
+#include <linux/string.h>
 #include <asm/backtrace.h>
 #include <asm/page.h>
 #include <asm/ucontext.h>
 #include <asm/switch_to.h>
 #include <asm/sigframe.h>
 #include <asm/stack.h>
+#include <asm/vdso.h>
 #include <arch/abi.h>
 #include <arch/interrupts.h>
 
@@ -102,9 +104,8 @@ static struct pt_regs *valid_fault_handler(struct KBacktraceIterator* kbt)
 	    p->sp >= sp) {
 		if (kbt->verbose)
 			pr_err("  <%s while in kernel mode>\n", fault);
-	} else if (EX1_PL(p->ex1) == USER_PL &&
-	    p->pc < PAGE_OFFSET &&
-	    p->sp < PAGE_OFFSET) {
+	} else if (user_mode(p) &&
+		   p->sp < PAGE_OFFSET && p->sp != 0) {
 		if (kbt->verbose)
 			pr_err("  <%s while in user mode>\n", fault);
 	} else if (kbt->verbose) {
@@ -120,7 +121,7 @@ static struct pt_regs *valid_fault_handler(struct KBacktraceIterator* kbt)
 /* Is the pc pointing to a sigreturn trampoline? */
 static int is_sigreturn(unsigned long pc)
 {
-	return (pc == VDSO_BASE);
+	return current->mm && (pc == VDSO_SYM(&__vdso_rt_sigreturn));
 }
 
 /* Return a pt_regs pointer for a valid signal handler frame */
@@ -129,7 +130,7 @@ static struct pt_regs *valid_sigframe(struct KBacktraceIterator* kbt,
 {
 	BacktraceIterator *b = &kbt->it;
 
-	if (b->pc == VDSO_BASE && b->sp < PAGE_OFFSET &&
+	if (is_sigreturn(b->pc) && b->sp < PAGE_OFFSET &&
 	    b->sp % sizeof(long) == 0) {
 		int retval;
 		pagefault_disable();
@@ -195,21 +196,21 @@ static int KBacktraceIterator_next_item_inclusive(
  */
 static void validate_stack(struct pt_regs *regs)
 {
-	int cpu = smp_processor_id();
+	int cpu = raw_smp_processor_id();
 	unsigned long ksp0 = get_current_ksp0();
-	unsigned long ksp0_base = ksp0 - THREAD_SIZE;
+	unsigned long ksp0_base = ksp0 & -THREAD_SIZE;
 	unsigned long sp = stack_pointer;
 
 	if (EX1_PL(regs->ex1) == KERNEL_PL && regs->sp >= ksp0) {
-		pr_err("WARNING: cpu %d: kernel stack page %#lx underrun!\n"
+		pr_err("WARNING: cpu %d: kernel stack %#lx..%#lx underrun!\n"
 		       "  sp %#lx (%#lx in caller), caller pc %#lx, lr %#lx\n",
-		       cpu, ksp0_base, sp, regs->sp, regs->pc, regs->lr);
+		       cpu, ksp0_base, ksp0, sp, regs->sp, regs->pc, regs->lr);
 	}
 
 	else if (sp < ksp0_base + sizeof(struct thread_info)) {
-		pr_err("WARNING: cpu %d: kernel stack page %#lx overrun!\n"
+		pr_err("WARNING: cpu %d: kernel stack %#lx..%#lx overrun!\n"
 		       "  sp %#lx (%#lx in caller), caller pc %#lx, lr %#lx\n",
-		       cpu, ksp0_base, sp, regs->sp, regs->pc, regs->lr);
+		       cpu, ksp0_base, ksp0, sp, regs->sp, regs->pc, regs->lr);
 	}
 }
 
@@ -332,26 +333,43 @@ static void describe_addr(struct KBacktraceIterator *kbt,
 	}
 
 	if (vma->vm_file) {
-		char *s;
 		p = d_path(&vma->vm_file->f_path, buf, bufsize);
 		if (IS_ERR(p))
 			p = "?";
-		s = strrchr(p, '/');
-		if (s)
-			p = s+1;
+		name = kbasename(p);
 	} else {
-		p = "anon";
+		name = "anon";
 	}
 
 	/* Generate a string description of the vma info. */
-	namelen = strlen(p);
+	namelen = strlen(name);
 	remaining = (bufsize - 1) - namelen;
-	memmove(buf, p, namelen);
+	memmove(buf, name, namelen);
 	snprintf(buf + namelen, remaining, "[%lx+%lx] ",
 		 vma->vm_start, vma->vm_end - vma->vm_start);
 }
 
 /*
+ * Avoid possible crash recursion during backtrace.  If it happens, it
+ * makes it easy to lose the actual root cause of the failure, so we
+ * put a simple guard on all the backtrace loops.
+ */
+static bool start_backtrace(void)
+{
+	if (current->thread.in_backtrace) {
+		pr_err("Backtrace requested while in backtrace!\n");
+		return false;
+	}
+	current->thread.in_backtrace = true;
+	return true;
+}
+
+static void end_backtrace(void)
+{
+	current->thread.in_backtrace = false;
+}
+
+/*
  * This method wraps the backtracer's more generic support.
  * It is only invoked from the architecture-specific code; show_stack()
  * and dump_stack() (in entry.S) are architecture-independent entry points.
@@ -361,6 +379,8 @@ void tile_show_stack(struct KBacktraceIterator *kbt, int headers)
 	int i;
 	int have_mmap_sem = 0;
 
+	if (!start_backtrace())
+		return;
 	if (headers) {
 		/*
 		 * Add a blank line since if we are called from panic(),
@@ -371,7 +391,7 @@ void tile_show_stack(struct KBacktraceIterator *kbt, int headers)
 		pr_err("Starting stack dump of tid %d, pid %d (%s)"
 		       " on cpu %d at cycle %lld\n",
 		       kbt->task->pid, kbt->task->tgid, kbt->task->comm,
-		       smp_processor_id(), get_cycles());
+		       raw_smp_processor_id(), get_cycles());
 	}
 	kbt->verbose = 1;
 	i = 0;
@@ -402,6 +422,7 @@ void tile_show_stack(struct KBacktraceIterator *kbt, int headers)
 		pr_err("Stack dump complete\n");
 	if (have_mmap_sem)
 		up_read(&kbt->task->mm->mmap_sem);
+	end_backtrace();
 }
 EXPORT_SYMBOL(tile_show_stack);
 
@@ -463,6 +484,8 @@ void save_stack_trace_tsk(struct task_struct *task, struct stack_trace *trace)
 	int skip = trace->skip;
 	int i = 0;
 
+	if (!start_backtrace())
+		goto done;
 	if (task == NULL || task == current)
 		KBacktraceIterator_init_current(&kbt);
 	else
@@ -476,6 +499,8 @@ void save_stack_trace_tsk(struct task_struct *task, struct stack_trace *trace)
 			break;
 		trace->entries[i++] = kbt.it.pc;
 	}
+	end_backtrace();
+done:
 	trace->nr_entries = i;
 }
 EXPORT_SYMBOL(save_stack_trace_tsk);
diff --git a/arch/tile/kernel/sys.c b/arch/tile/kernel/sys.c
index b881a7be..38debe7 100644
--- a/arch/tile/kernel/sys.c
+++ b/arch/tile/kernel/sys.c
@@ -38,8 +38,10 @@
 SYSCALL_DEFINE3(cacheflush, unsigned long, addr, unsigned long, len,
 		unsigned long, flags)
 {
+	/* DCACHE is not particularly effective if not bound to one cpu. */
 	if (flags & DCACHE)
-		homecache_evict(cpumask_of(smp_processor_id()));
+		homecache_evict(cpumask_of(raw_smp_processor_id()));
+
 	if (flags & ICACHE)
 		flush_remote(0, HV_FLUSH_EVICT_L1I, mm_cpumask(current->mm),
 			     0, 0, 0, NULL, NULL, 0);
diff --git a/arch/tile/kernel/sysfs.c b/arch/tile/kernel/sysfs.c
index e25b0a8..a3ed12f 100644
--- a/arch/tile/kernel/sysfs.c
+++ b/arch/tile/kernel/sysfs.c
@@ -157,6 +157,67 @@ hvconfig_bin_read(struct file *filp, struct kobject *kobj,
 	return count;
 }
 
+static ssize_t hv_stats_show(struct device *dev,
+			     struct device_attribute *attr,
+			     char *page)
+{
+	int cpu = dev->id;
+	long lotar = HV_XY_TO_LOTAR(cpu_x(cpu), cpu_y(cpu));
+
+	ssize_t n = hv_confstr(HV_CONFSTR_HV_STATS,
+			       (unsigned long)page, PAGE_SIZE - 1,
+			       lotar, 0);
+	n = n < 0 ? 0 : min(n, (ssize_t)PAGE_SIZE - 1);
+	page[n] = '\0';
+	return n;
+}
+
+static ssize_t hv_stats_store(struct device *dev,
+			      struct device_attribute *attr,
+			      const char *page,
+			      size_t count)
+{
+	int cpu = dev->id;
+	long lotar = HV_XY_TO_LOTAR(cpu_x(cpu), cpu_y(cpu));
+
+	ssize_t n = hv_confstr(HV_CONFSTR_HV_STATS, 0, 0, lotar, 1);
+	return n < 0 ? n : count;
+}
+
+static DEVICE_ATTR(hv_stats, 0644, hv_stats_show, hv_stats_store);
+
+static int hv_stats_device_add(struct device *dev, struct subsys_interface *sif)
+{
+	int err, cpu = dev->id;
+
+	if (!cpu_online(cpu))
+		return 0;
+
+	err = sysfs_create_file(&dev->kobj, &dev_attr_hv_stats.attr);
+
+	return err;
+}
+
+static int hv_stats_device_remove(struct device *dev,
+				  struct subsys_interface *sif)
+{
+	int cpu = dev->id;
+
+	if (!cpu_online(cpu))
+		return 0;
+
+	sysfs_remove_file(&dev->kobj, &dev_attr_hv_stats.attr);
+	return 0;
+}
+
+
+static struct subsys_interface hv_stats_interface = {
+	.name			= "hv_stats",
+	.subsys			= &cpu_subsys,
+	.add_dev		= hv_stats_device_add,
+	.remove_dev		= hv_stats_device_remove,
+};
+
 static int __init create_sysfs_entries(void)
 {
 	int err = 0;
@@ -188,6 +249,21 @@ static int __init create_sysfs_entries(void)
 		err = sysfs_create_bin_file(hypervisor_kobj, &hvconfig_bin);
 	}
 
+	if (!err) {
+		/*
+		 * Don't bother adding the hv_stats files on each CPU if
+		 * our hypervisor doesn't supply statistics.
+		 */
+		int cpu = raw_smp_processor_id();
+		long lotar = HV_XY_TO_LOTAR(cpu_x(cpu), cpu_y(cpu));
+		char dummy;
+		ssize_t n = hv_confstr(HV_CONFSTR_HV_STATS,
+				       (unsigned long) &dummy, 1,
+				       lotar, 0);
+		if (n >= 0)
+			err = subsys_interface_register(&hv_stats_interface);
+	}
+
 	return err;
 }
 subsys_initcall(create_sysfs_entries);
diff --git a/arch/tile/kernel/time.c b/arch/tile/kernel/time.c
index 7c353d8..5d10642 100644
--- a/arch/tile/kernel/time.c
+++ b/arch/tile/kernel/time.c
@@ -23,8 +23,10 @@
 #include <linux/smp.h>
 #include <linux/delay.h>
 #include <linux/module.h>
+#include <linux/timekeeper_internal.h>
 #include <asm/irq_regs.h>
 #include <asm/traps.h>
+#include <asm/vdso.h>
 #include <hv/hypervisor.h>
 #include <arch/interrupts.h>
 #include <arch/spr_def.h>
@@ -110,7 +112,6 @@ void __init time_init(void)
 	setup_tile_timer();
 }
 
-
 /*
  * Define the tile timer clock event device.  The timer is driven by
  * the TILE_TIMER_CONTROL register, which consists of a 31-bit down
@@ -237,3 +238,37 @@ cycles_t ns2cycles(unsigned long nsecs)
 	struct clock_event_device *dev = &__raw_get_cpu_var(tile_timer);
 	return ((u64)nsecs * dev->mult) >> dev->shift;
 }
+
+void update_vsyscall_tz(void)
+{
+	/* Userspace gettimeofday will spin while this value is odd. */
+	++vdso_data->tz_update_count;
+	smp_wmb();
+	vdso_data->tz_minuteswest = sys_tz.tz_minuteswest;
+	vdso_data->tz_dsttime = sys_tz.tz_dsttime;
+	smp_wmb();
+	++vdso_data->tz_update_count;
+}
+
+void update_vsyscall(struct timekeeper *tk)
+{
+	struct timespec wall_time = tk_xtime(tk);
+	struct timespec *wtm = &tk->wall_to_monotonic;
+	struct clocksource *clock = tk->clock;
+
+	if (clock != &cycle_counter_cs)
+		return;
+
+	/* Userspace gettimeofday will spin while this value is odd. */
+	++vdso_data->tb_update_count;
+	smp_wmb();
+	vdso_data->xtime_tod_stamp = clock->cycle_last;
+	vdso_data->xtime_clock_sec = wall_time.tv_sec;
+	vdso_data->xtime_clock_nsec = wall_time.tv_nsec;
+	vdso_data->wtom_clock_sec = wtm->tv_sec;
+	vdso_data->wtom_clock_nsec = wtm->tv_nsec;
+	vdso_data->mult = clock->mult;
+	vdso_data->shift = clock->shift;
+	smp_wmb();
+	++vdso_data->tb_update_count;
+}
diff --git a/arch/tile/kernel/tlb.c b/arch/tile/kernel/tlb.c
index 3fd54d5..f23b535 100644
--- a/arch/tile/kernel/tlb.c
+++ b/arch/tile/kernel/tlb.c
@@ -91,8 +91,14 @@ void flush_tlb_all(void)
 	}
 }
 
+/*
+ * Callers need to flush the L1I themselves if necessary, e.g. for
+ * kernel module unload.  Otherwise we assume callers are not using
+ * executable pgprot_t's.  Using EVICT_L1I means that dataplane cpus
+ * will get an unnecessary interrupt otherwise.
+ */
 void flush_tlb_kernel_range(unsigned long start, unsigned long end)
 {
-	flush_remote(0, HV_FLUSH_EVICT_L1I, cpu_online_mask,
+	flush_remote(0, 0, NULL,
 		     start, end - start, PAGE_SIZE, cpu_online_mask, NULL, 0);
 }
diff --git a/arch/tile/kernel/traps.c b/arch/tile/kernel/traps.c
index 5b19a23..6b603d5 100644
--- a/arch/tile/kernel/traps.c
+++ b/arch/tile/kernel/traps.c
@@ -15,6 +15,7 @@
 #include <linux/sched.h>
 #include <linux/kernel.h>
 #include <linux/kprobes.h>
+#include <linux/kdebug.h>
 #include <linux/module.h>
 #include <linux/reboot.h>
 #include <linux/uaccess.h>
@@ -29,7 +30,7 @@
 
 void __init trap_init(void)
 {
-	/* Nothing needed here since we link code at .intrpt1 */
+	/* Nothing needed here since we link code at .intrpt */
 }
 
 int unaligned_fixup = 1;
@@ -100,13 +101,7 @@ static int retry_gpv(unsigned int gpv_reason)
 
 #endif /* CHIP_HAS_TILE_DMA() */
 
-#ifdef __tilegx__
-#define bundle_bits tilegx_bundle_bits
-#else
-#define bundle_bits tile_bundle_bits
-#endif
-
-extern bundle_bits bpt_code;
+extern tile_bundle_bits bpt_code;
 
 asm(".pushsection .rodata.bpt_code,\"a\";"
     ".align 8;"
@@ -114,7 +109,7 @@ asm(".pushsection .rodata.bpt_code,\"a\";"
     ".size bpt_code,.-bpt_code;"
     ".popsection");
 
-static int special_ill(bundle_bits bundle, int *sigp, int *codep)
+static int special_ill(tile_bundle_bits bundle, int *sigp, int *codep)
 {
 	int sig, code, maxcode;
 
@@ -214,24 +209,73 @@ static const char *const int_name[] = {
 #endif
 };
 
+static int do_bpt(struct pt_regs *regs)
+{
+	unsigned long bundle, bcode, bpt;
+
+	bundle = *(unsigned long *)instruction_pointer(regs);
+
+	/*
+	 * bpt shoule be { bpt; nop }, which is 0x286a44ae51485000ULL.
+	 * we encode the unused least significant bits for other purpose.
+	 */
+	bpt = bundle & ~((1ULL << 12) - 1);
+	if (bpt != TILE_BPT_BUNDLE)
+		return 0;
+
+	bcode = bundle & ((1ULL << 12) - 1);
+	/*
+	 * notify the kprobe handlers, if instruction is likely to
+	 * pertain to them.
+	 */
+	switch (bcode) {
+	/* breakpoint_insn */
+	case 0:
+		notify_die(DIE_BREAK, "debug", regs, bundle,
+			INT_ILL, SIGTRAP);
+		break;
+	/* compiled_bpt */
+	case DIE_COMPILED_BPT:
+		notify_die(DIE_COMPILED_BPT, "debug", regs, bundle,
+			INT_ILL, SIGTRAP);
+		break;
+	/* breakpoint2_insn */
+	case DIE_SSTEPBP:
+		notify_die(DIE_SSTEPBP, "single_step", regs, bundle,
+			INT_ILL, SIGTRAP);
+		break;
+	default:
+		return 0;
+	}
+
+	return 1;
+}
+
 void __kprobes do_trap(struct pt_regs *regs, int fault_num,
 		       unsigned long reason)
 {
 	siginfo_t info = { 0 };
 	int signo, code;
 	unsigned long address = 0;
-	bundle_bits instr;
+	tile_bundle_bits instr;
+	int is_kernel = !user_mode(regs);
+
+	/* Handle breakpoints, etc. */
+	if (is_kernel && fault_num == INT_ILL && do_bpt(regs))
+		return;
 
-	/* Re-enable interrupts. */
-	local_irq_enable();
+	/* Re-enable interrupts, if they were previously enabled. */
+	if (!(regs->flags & PT_FLAGS_DISABLE_IRQ))
+		local_irq_enable();
 
 	/*
 	 * If it hits in kernel mode and we can't fix it up, just exit the
 	 * current process and hope for the best.
 	 */
-	if (!user_mode(regs)) {
+	if (is_kernel) {
 		const char *name;
-		if (fixup_exception(regs))  /* only UNALIGN_DATA in practice */
+		char buf[100];
+		if (fixup_exception(regs))  /* ILL_TRANS or UNALIGN_DATA */
 			return;
 		if (fault_num >= 0 &&
 		    fault_num < sizeof(int_name)/sizeof(int_name[0]) &&
@@ -239,10 +283,16 @@ void __kprobes do_trap(struct pt_regs *regs, int fault_num,
 			name = int_name[fault_num];
 		else
 			name = "Unknown interrupt";
-		pr_alert("Kernel took bad trap %d (%s) at PC %#lx\n",
-			 fault_num, name, regs->pc);
 		if (fault_num == INT_GPV)
-			pr_alert("GPV_REASON is %#lx\n", reason);
+			snprintf(buf, sizeof(buf), "; GPV_REASON %#lx", reason);
+#ifdef __tilegx__
+		else if (fault_num == INT_ILL_TRANS)
+			snprintf(buf, sizeof(buf), "; address %#lx", reason);
+#endif
+		else
+			buf[0] = '\0';
+		pr_alert("Kernel took bad trap %d (%s) at PC %#lx%s\n",
+			 fault_num, name, regs->pc, buf);
 		show_regs(regs);
 		do_exit(SIGKILL);  /* FIXME: implement i386 die() */
 		return;
@@ -324,11 +374,8 @@ void __kprobes do_trap(struct pt_regs *regs, int fault_num,
 		fill_ra_stack();
 
 		signo = SIGSEGV;
+		address = reason;
 		code = SEGV_MAPERR;
-		if (reason & SPR_ILL_TRANS_REASON__I_STREAM_VA_RMASK)
-			address = regs->pc;
-		else
-			address = 0;  /* FIXME: GX: single-step for address */
 		break;
 	}
 #endif
diff --git a/arch/tile/kernel/unaligned.c b/arch/tile/kernel/unaligned.c
new file mode 100644
index 0000000..b030b4e
--- /dev/null
+++ b/arch/tile/kernel/unaligned.c
@@ -0,0 +1,1609 @@
+/*
+ * Copyright 2013 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * A code-rewriter that handles unaligned exception.
+ */
+
+#include <linux/smp.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/thread_info.h>
+#include <linux/uaccess.h>
+#include <linux/mman.h>
+#include <linux/types.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/compat.h>
+#include <linux/prctl.h>
+#include <asm/cacheflush.h>
+#include <asm/traps.h>
+#include <asm/uaccess.h>
+#include <asm/unaligned.h>
+#include <arch/abi.h>
+#include <arch/spr_def.h>
+#include <arch/opcode.h>
+
+
+/*
+ * This file handles unaligned exception for tile-Gx. The tilepro's unaligned
+ * exception is supported out of single_step.c
+ */
+
+int unaligned_printk;
+
+static int __init setup_unaligned_printk(char *str)
+{
+	long val;
+	if (kstrtol(str, 0, &val) != 0)
+		return 0;
+	unaligned_printk = val;
+	pr_info("Printk for each unaligned data accesses is %s\n",
+		unaligned_printk ? "enabled" : "disabled");
+	return 1;
+}
+__setup("unaligned_printk=", setup_unaligned_printk);
+
+unsigned int unaligned_fixup_count;
+
+#ifdef __tilegx__
+
+/*
+ * Unalign data jit fixup code fragement. Reserved space is 128 bytes.
+ * The 1st 64-bit word saves fault PC address, 2nd word is the fault
+ * instruction bundle followed by 14 JIT bundles.
+ */
+
+struct unaligned_jit_fragment {
+	unsigned long       pc;
+	tilegx_bundle_bits  bundle;
+	tilegx_bundle_bits  insn[14];
+};
+
+/*
+ * Check if a nop or fnop at bundle's pipeline X0.
+ */
+
+static bool is_bundle_x0_nop(tilegx_bundle_bits bundle)
+{
+	return (((get_UnaryOpcodeExtension_X0(bundle) ==
+		  NOP_UNARY_OPCODE_X0) &&
+		 (get_RRROpcodeExtension_X0(bundle) ==
+		  UNARY_RRR_0_OPCODE_X0) &&
+		 (get_Opcode_X0(bundle) ==
+		  RRR_0_OPCODE_X0)) ||
+		((get_UnaryOpcodeExtension_X0(bundle) ==
+		  FNOP_UNARY_OPCODE_X0) &&
+		 (get_RRROpcodeExtension_X0(bundle) ==
+		  UNARY_RRR_0_OPCODE_X0) &&
+		 (get_Opcode_X0(bundle) ==
+		  RRR_0_OPCODE_X0)));
+}
+
+/*
+ * Check if nop or fnop at bundle's pipeline X1.
+ */
+
+static bool is_bundle_x1_nop(tilegx_bundle_bits bundle)
+{
+	return (((get_UnaryOpcodeExtension_X1(bundle) ==
+		  NOP_UNARY_OPCODE_X1) &&
+		 (get_RRROpcodeExtension_X1(bundle) ==
+		  UNARY_RRR_0_OPCODE_X1) &&
+		 (get_Opcode_X1(bundle) ==
+		  RRR_0_OPCODE_X1)) ||
+		((get_UnaryOpcodeExtension_X1(bundle) ==
+		  FNOP_UNARY_OPCODE_X1) &&
+		 (get_RRROpcodeExtension_X1(bundle) ==
+		  UNARY_RRR_0_OPCODE_X1) &&
+		 (get_Opcode_X1(bundle) ==
+		  RRR_0_OPCODE_X1)));
+}
+
+/*
+ * Check if nop or fnop at bundle's Y0 pipeline.
+ */
+
+static bool is_bundle_y0_nop(tilegx_bundle_bits bundle)
+{
+	return (((get_UnaryOpcodeExtension_Y0(bundle) ==
+		  NOP_UNARY_OPCODE_Y0) &&
+		 (get_RRROpcodeExtension_Y0(bundle) ==
+		  UNARY_RRR_1_OPCODE_Y0) &&
+		 (get_Opcode_Y0(bundle) ==
+		  RRR_1_OPCODE_Y0)) ||
+		((get_UnaryOpcodeExtension_Y0(bundle) ==
+		  FNOP_UNARY_OPCODE_Y0) &&
+		 (get_RRROpcodeExtension_Y0(bundle) ==
+		  UNARY_RRR_1_OPCODE_Y0) &&
+		 (get_Opcode_Y0(bundle) ==
+		  RRR_1_OPCODE_Y0)));
+}
+
+/*
+ * Check if nop or fnop at bundle's pipeline Y1.
+ */
+
+static bool is_bundle_y1_nop(tilegx_bundle_bits bundle)
+{
+	return (((get_UnaryOpcodeExtension_Y1(bundle) ==
+		  NOP_UNARY_OPCODE_Y1) &&
+		 (get_RRROpcodeExtension_Y1(bundle) ==
+		  UNARY_RRR_1_OPCODE_Y1) &&
+		 (get_Opcode_Y1(bundle) ==
+		  RRR_1_OPCODE_Y1)) ||
+		((get_UnaryOpcodeExtension_Y1(bundle) ==
+		  FNOP_UNARY_OPCODE_Y1) &&
+		 (get_RRROpcodeExtension_Y1(bundle) ==
+		  UNARY_RRR_1_OPCODE_Y1) &&
+		 (get_Opcode_Y1(bundle) ==
+		  RRR_1_OPCODE_Y1)));
+}
+
+/*
+ * Test if a bundle's y0 and y1 pipelines are both nop or fnop.
+ */
+
+static bool is_y0_y1_nop(tilegx_bundle_bits bundle)
+{
+	return is_bundle_y0_nop(bundle) && is_bundle_y1_nop(bundle);
+}
+
+/*
+ * Test if a bundle's x0 and x1 pipelines are both nop or fnop.
+ */
+
+static bool is_x0_x1_nop(tilegx_bundle_bits bundle)
+{
+	return is_bundle_x0_nop(bundle) && is_bundle_x1_nop(bundle);
+}
+
+/*
+ * Find the destination, source registers of fault unalign access instruction
+ * at X1 or Y2. Also, allocate up to 3 scratch registers clob1, clob2 and
+ * clob3, which are guaranteed different from any register used in the fault
+ * bundle. r_alias is used to return if the other instructions other than the
+ * unalign load/store shares same register with ra, rb and rd.
+ */
+
+static void find_regs(tilegx_bundle_bits bundle, uint64_t *rd, uint64_t *ra,
+		      uint64_t *rb, uint64_t *clob1, uint64_t *clob2,
+		      uint64_t *clob3, bool *r_alias)
+{
+	int i;
+	uint64_t reg;
+	uint64_t reg_map = 0, alias_reg_map = 0, map;
+	bool alias;
+
+	*ra = -1;
+	*rb = -1;
+
+	if (rd)
+		*rd = -1;
+
+	*clob1 = -1;
+	*clob2 = -1;
+	*clob3 = -1;
+	alias = false;
+
+	/*
+	 * Parse fault bundle, find potential used registers and mark
+	 * corresponding bits in reg_map and alias_map. These 2 bit maps
+	 * are used to find the scratch registers and determine if there
+	 * is register alais.
+	 */
+	if (bundle & TILEGX_BUNDLE_MODE_MASK) {  /* Y Mode Bundle. */
+
+		reg = get_SrcA_Y2(bundle);
+		reg_map |= 1ULL << reg;
+		*ra = reg;
+		reg = get_SrcBDest_Y2(bundle);
+		reg_map |= 1ULL << reg;
+
+		if (rd) {
+			/* Load. */
+			*rd = reg;
+			alias_reg_map = (1ULL << *rd) | (1ULL << *ra);
+		} else {
+			/* Store. */
+			*rb = reg;
+			alias_reg_map = (1ULL << *ra) | (1ULL << *rb);
+		}
+
+		if (!is_bundle_y1_nop(bundle)) {
+			reg = get_SrcA_Y1(bundle);
+			reg_map |= (1ULL << reg);
+			map = (1ULL << reg);
+
+			reg = get_SrcB_Y1(bundle);
+			reg_map |= (1ULL << reg);
+			map |= (1ULL << reg);
+
+			reg = get_Dest_Y1(bundle);
+			reg_map |= (1ULL << reg);
+			map |= (1ULL << reg);
+
+			if (map & alias_reg_map)
+				alias = true;
+		}
+
+		if (!is_bundle_y0_nop(bundle)) {
+			reg = get_SrcA_Y0(bundle);
+			reg_map |= (1ULL << reg);
+			map = (1ULL << reg);
+
+			reg = get_SrcB_Y0(bundle);
+			reg_map |= (1ULL << reg);
+			map |= (1ULL << reg);
+
+			reg = get_Dest_Y0(bundle);
+			reg_map |= (1ULL << reg);
+			map |= (1ULL << reg);
+
+			if (map & alias_reg_map)
+				alias = true;
+		}
+	} else	{ /* X Mode Bundle. */
+
+		reg = get_SrcA_X1(bundle);
+		reg_map |= (1ULL << reg);
+		*ra = reg;
+		if (rd)	{
+			/* Load. */
+			reg = get_Dest_X1(bundle);
+			reg_map |= (1ULL << reg);
+			*rd = reg;
+			alias_reg_map = (1ULL << *rd) | (1ULL << *ra);
+		} else {
+			/* Store. */
+			reg = get_SrcB_X1(bundle);
+			reg_map |= (1ULL << reg);
+			*rb = reg;
+			alias_reg_map = (1ULL << *ra) | (1ULL << *rb);
+		}
+
+		if (!is_bundle_x0_nop(bundle)) {
+			reg = get_SrcA_X0(bundle);
+			reg_map |= (1ULL << reg);
+			map = (1ULL << reg);
+
+			reg = get_SrcB_X0(bundle);
+			reg_map |= (1ULL << reg);
+			map |= (1ULL << reg);
+
+			reg = get_Dest_X0(bundle);
+			reg_map |= (1ULL << reg);
+			map |= (1ULL << reg);
+
+			if (map & alias_reg_map)
+				alias = true;
+		}
+	}
+
+	/*
+	 * "alias" indicates if the unalign access registers have collision
+	 * with others in the same bundle. We jsut simply test all register
+	 * operands case (RRR), ignored the case with immidate. If a bundle
+	 * has no register alias, we may do fixup in a simple or fast manner.
+	 * So if an immidata field happens to hit with a register, we may end
+	 * up fall back to the generic handling.
+	 */
+
+	*r_alias = alias;
+
+	/* Flip bits on reg_map. */
+	reg_map ^= -1ULL;
+
+	/* Scan reg_map lower 54(TREG_SP) bits to find 3 set bits. */
+	for (i = 0; i < TREG_SP; i++) {
+		if (reg_map & (0x1ULL << i)) {
+			if (*clob1 == -1) {
+				*clob1 = i;
+			} else if (*clob2 == -1) {
+				*clob2 = i;
+			} else if (*clob3 == -1) {
+				*clob3 = i;
+				return;
+			}
+		}
+	}
+}
+
+/*
+ * Sanity check for register ra, rb, rd, clob1/2/3. Return true if any of them
+ * is unexpected.
+ */
+
+static bool check_regs(uint64_t rd, uint64_t ra, uint64_t rb,
+		       uint64_t clob1, uint64_t clob2,  uint64_t clob3)
+{
+	bool unexpected = false;
+	if ((ra >= 56) && (ra != TREG_ZERO))
+		unexpected = true;
+
+	if ((clob1 >= 56) || (clob2 >= 56) || (clob3 >= 56))
+		unexpected = true;
+
+	if (rd != -1) {
+		if ((rd >= 56) && (rd != TREG_ZERO))
+			unexpected = true;
+	} else {
+		if ((rb >= 56) && (rb != TREG_ZERO))
+			unexpected = true;
+	}
+	return unexpected;
+}
+
+
+#define  GX_INSN_X0_MASK   ((1ULL << 31) - 1)
+#define  GX_INSN_X1_MASK   (((1ULL << 31) - 1) << 31)
+#define  GX_INSN_Y0_MASK   ((0xFULL << 27) | (0xFFFFFULL))
+#define  GX_INSN_Y1_MASK   (GX_INSN_Y0_MASK << 31)
+#define  GX_INSN_Y2_MASK   ((0x7FULL << 51) | (0x7FULL << 20))
+
+#ifdef __LITTLE_ENDIAN
+#define  GX_INSN_BSWAP(_bundle_)    (_bundle_)
+#else
+#define  GX_INSN_BSWAP(_bundle_)    swab64(_bundle_)
+#endif /* __LITTLE_ENDIAN */
+
+/*
+ * __JIT_CODE(.) creates template bundles in .rodata.unalign_data section.
+ * The corresponding static function jix_x#_###(.) generates partial or
+ * whole bundle based on the template and given arguments.
+ */
+
+#define __JIT_CODE(_X_)						\
+	asm (".pushsection .rodata.unalign_data, \"a\"\n"	\
+	     _X_"\n"						\
+	     ".popsection\n")
+
+__JIT_CODE("__unalign_jit_x1_mtspr:   {mtspr 0,  r0}");
+static tilegx_bundle_bits jit_x1_mtspr(int spr, int reg)
+{
+	extern  tilegx_bundle_bits __unalign_jit_x1_mtspr;
+	return (GX_INSN_BSWAP(__unalign_jit_x1_mtspr) & GX_INSN_X1_MASK) |
+		create_MT_Imm14_X1(spr) | create_SrcA_X1(reg);
+}
+
+__JIT_CODE("__unalign_jit_x1_mfspr:   {mfspr r0, 0}");
+static tilegx_bundle_bits  jit_x1_mfspr(int reg, int spr)
+{
+	extern  tilegx_bundle_bits __unalign_jit_x1_mfspr;
+	return (GX_INSN_BSWAP(__unalign_jit_x1_mfspr) & GX_INSN_X1_MASK) |
+		create_MF_Imm14_X1(spr) | create_Dest_X1(reg);
+}
+
+__JIT_CODE("__unalign_jit_x0_addi:   {addi  r0, r0, 0; iret}");
+static tilegx_bundle_bits  jit_x0_addi(int rd, int ra, int imm8)
+{
+	extern  tilegx_bundle_bits __unalign_jit_x0_addi;
+	return (GX_INSN_BSWAP(__unalign_jit_x0_addi) & GX_INSN_X0_MASK) |
+		create_Dest_X0(rd) | create_SrcA_X0(ra) |
+		create_Imm8_X0(imm8);
+}
+
+__JIT_CODE("__unalign_jit_x1_ldna:   {ldna  r0, r0}");
+static tilegx_bundle_bits  jit_x1_ldna(int rd, int ra)
+{
+	extern  tilegx_bundle_bits __unalign_jit_x1_ldna;
+	return (GX_INSN_BSWAP(__unalign_jit_x1_ldna) &  GX_INSN_X1_MASK) |
+		create_Dest_X1(rd) | create_SrcA_X1(ra);
+}
+
+__JIT_CODE("__unalign_jit_x0_dblalign:   {dblalign r0, r0 ,r0}");
+static tilegx_bundle_bits  jit_x0_dblalign(int rd, int ra, int rb)
+{
+	extern  tilegx_bundle_bits __unalign_jit_x0_dblalign;
+	return (GX_INSN_BSWAP(__unalign_jit_x0_dblalign) & GX_INSN_X0_MASK) |
+		create_Dest_X0(rd) | create_SrcA_X0(ra) |
+		create_SrcB_X0(rb);
+}
+
+__JIT_CODE("__unalign_jit_x1_iret:   {iret}");
+static tilegx_bundle_bits  jit_x1_iret(void)
+{
+	extern  tilegx_bundle_bits __unalign_jit_x1_iret;
+	return GX_INSN_BSWAP(__unalign_jit_x1_iret) & GX_INSN_X1_MASK;
+}
+
+__JIT_CODE("__unalign_jit_x01_fnop:   {fnop;fnop}");
+static tilegx_bundle_bits  jit_x0_fnop(void)
+{
+	extern  tilegx_bundle_bits __unalign_jit_x01_fnop;
+	return GX_INSN_BSWAP(__unalign_jit_x01_fnop) & GX_INSN_X0_MASK;
+}
+
+static tilegx_bundle_bits  jit_x1_fnop(void)
+{
+	extern  tilegx_bundle_bits __unalign_jit_x01_fnop;
+	return GX_INSN_BSWAP(__unalign_jit_x01_fnop) & GX_INSN_X1_MASK;
+}
+
+__JIT_CODE("__unalign_jit_y2_dummy:   {fnop; fnop; ld zero, sp}");
+static tilegx_bundle_bits  jit_y2_dummy(void)
+{
+	extern  tilegx_bundle_bits __unalign_jit_y2_dummy;
+	return GX_INSN_BSWAP(__unalign_jit_y2_dummy) & GX_INSN_Y2_MASK;
+}
+
+static tilegx_bundle_bits  jit_y1_fnop(void)
+{
+	extern  tilegx_bundle_bits __unalign_jit_y2_dummy;
+	return GX_INSN_BSWAP(__unalign_jit_y2_dummy) & GX_INSN_Y1_MASK;
+}
+
+__JIT_CODE("__unalign_jit_x1_st1_add:  {st1_add r1, r0, 0}");
+static tilegx_bundle_bits  jit_x1_st1_add(int ra, int rb, int imm8)
+{
+	extern  tilegx_bundle_bits __unalign_jit_x1_st1_add;
+	return (GX_INSN_BSWAP(__unalign_jit_x1_st1_add) &
+		(~create_SrcA_X1(-1)) &
+		GX_INSN_X1_MASK) | create_SrcA_X1(ra) |
+		create_SrcB_X1(rb) | create_Dest_Imm8_X1(imm8);
+}
+
+__JIT_CODE("__unalign_jit_x1_st:  {crc32_8 r1, r0, r0; st  r0, r0}");
+static tilegx_bundle_bits  jit_x1_st(int ra, int rb)
+{
+	extern  tilegx_bundle_bits __unalign_jit_x1_st;
+	return (GX_INSN_BSWAP(__unalign_jit_x1_st) & GX_INSN_X1_MASK) |
+		create_SrcA_X1(ra) | create_SrcB_X1(rb);
+}
+
+__JIT_CODE("__unalign_jit_x1_st_add:  {st_add  r1, r0, 0}");
+static tilegx_bundle_bits  jit_x1_st_add(int ra, int rb, int imm8)
+{
+	extern  tilegx_bundle_bits __unalign_jit_x1_st_add;
+	return (GX_INSN_BSWAP(__unalign_jit_x1_st_add) &
+		(~create_SrcA_X1(-1)) &
+		GX_INSN_X1_MASK) | create_SrcA_X1(ra) |
+		create_SrcB_X1(rb) | create_Dest_Imm8_X1(imm8);
+}
+
+__JIT_CODE("__unalign_jit_x1_ld:  {crc32_8 r1, r0, r0; ld  r0, r0}");
+static tilegx_bundle_bits  jit_x1_ld(int rd, int ra)
+{
+	extern  tilegx_bundle_bits __unalign_jit_x1_ld;
+	return (GX_INSN_BSWAP(__unalign_jit_x1_ld) & GX_INSN_X1_MASK) |
+		create_Dest_X1(rd) | create_SrcA_X1(ra);
+}
+
+__JIT_CODE("__unalign_jit_x1_ld_add:  {ld_add  r1, r0, 0}");
+static tilegx_bundle_bits  jit_x1_ld_add(int rd, int ra, int imm8)
+{
+	extern  tilegx_bundle_bits __unalign_jit_x1_ld_add;
+	return (GX_INSN_BSWAP(__unalign_jit_x1_ld_add) &
+		(~create_Dest_X1(-1)) &
+		GX_INSN_X1_MASK) | create_Dest_X1(rd) |
+		create_SrcA_X1(ra) | create_Imm8_X1(imm8);
+}
+
+__JIT_CODE("__unalign_jit_x0_bfexts:  {bfexts r0, r0, 0, 0}");
+static tilegx_bundle_bits  jit_x0_bfexts(int rd, int ra, int bfs, int bfe)
+{
+	extern  tilegx_bundle_bits __unalign_jit_x0_bfexts;
+	return (GX_INSN_BSWAP(__unalign_jit_x0_bfexts) &
+		GX_INSN_X0_MASK) |
+		create_Dest_X0(rd) | create_SrcA_X0(ra) |
+		create_BFStart_X0(bfs) | create_BFEnd_X0(bfe);
+}
+
+__JIT_CODE("__unalign_jit_x0_bfextu:  {bfextu r0, r0, 0, 0}");
+static tilegx_bundle_bits  jit_x0_bfextu(int rd, int ra, int bfs, int bfe)
+{
+	extern  tilegx_bundle_bits __unalign_jit_x0_bfextu;
+	return (GX_INSN_BSWAP(__unalign_jit_x0_bfextu) &
+		GX_INSN_X0_MASK) |
+		create_Dest_X0(rd) | create_SrcA_X0(ra) |
+		create_BFStart_X0(bfs) | create_BFEnd_X0(bfe);
+}
+
+__JIT_CODE("__unalign_jit_x1_addi:  {bfextu r1, r1, 0, 0; addi r0, r0, 0}");
+static tilegx_bundle_bits  jit_x1_addi(int rd, int ra, int imm8)
+{
+	extern  tilegx_bundle_bits __unalign_jit_x1_addi;
+	return (GX_INSN_BSWAP(__unalign_jit_x1_addi) & GX_INSN_X1_MASK) |
+		create_Dest_X1(rd) | create_SrcA_X1(ra) |
+		create_Imm8_X1(imm8);
+}
+
+__JIT_CODE("__unalign_jit_x0_shrui:  {shrui r0, r0, 0; iret}");
+static tilegx_bundle_bits  jit_x0_shrui(int rd, int ra, int imm6)
+{
+	extern  tilegx_bundle_bits __unalign_jit_x0_shrui;
+	return (GX_INSN_BSWAP(__unalign_jit_x0_shrui) &
+		GX_INSN_X0_MASK) |
+		create_Dest_X0(rd) | create_SrcA_X0(ra) |
+		create_ShAmt_X0(imm6);
+}
+
+__JIT_CODE("__unalign_jit_x0_rotli:  {rotli r0, r0, 0; iret}");
+static tilegx_bundle_bits  jit_x0_rotli(int rd, int ra, int imm6)
+{
+	extern  tilegx_bundle_bits __unalign_jit_x0_rotli;
+	return (GX_INSN_BSWAP(__unalign_jit_x0_rotli) &
+		GX_INSN_X0_MASK) |
+		create_Dest_X0(rd) | create_SrcA_X0(ra) |
+		create_ShAmt_X0(imm6);
+}
+
+__JIT_CODE("__unalign_jit_x1_bnezt:  {bnezt r0, __unalign_jit_x1_bnezt}");
+static tilegx_bundle_bits  jit_x1_bnezt(int ra, int broff)
+{
+	extern  tilegx_bundle_bits __unalign_jit_x1_bnezt;
+	return (GX_INSN_BSWAP(__unalign_jit_x1_bnezt) &
+		GX_INSN_X1_MASK) |
+		create_SrcA_X1(ra) | create_BrOff_X1(broff);
+}
+
+#undef __JIT_CODE
+
+/*
+ * This function generates unalign fixup JIT.
+ *
+ * We first find unalign load/store instruction's destination, source
+ * registers: ra, rb and rd. and 3 scratch registers by calling
+ * find_regs(...). 3 scratch clobbers should not alias with any register
+ * used in the fault bundle. Then analyze the fault bundle to determine
+ * if it's a load or store, operand width, branch or address increment etc.
+ * At last generated JIT is copied into JIT code area in user space.
+ */
+
+static
+void jit_bundle_gen(struct pt_regs *regs, tilegx_bundle_bits bundle,
+		    int align_ctl)
+{
+	struct thread_info *info = current_thread_info();
+	struct unaligned_jit_fragment frag;
+	struct unaligned_jit_fragment *jit_code_area;
+	tilegx_bundle_bits bundle_2 = 0;
+	/* If bundle_2_enable = false, bundle_2 is fnop/nop operation. */
+	bool     bundle_2_enable = true;
+	uint64_t ra, rb, rd = -1, clob1, clob2, clob3;
+	/*
+	 * Indicate if the unalign access
+	 * instruction's registers hit with
+	 * others in the same bundle.
+	 */
+	bool     alias = false;
+	bool     load_n_store = true;
+	bool     load_store_signed = false;
+	unsigned int  load_store_size = 8;
+	bool     y1_br = false;  /* True, for a branch in same bundle at Y1.*/
+	int      y1_br_reg = 0;
+	/* True for link operation. i.e. jalr or lnk at Y1 */
+	bool     y1_lr = false;
+	int      y1_lr_reg = 0;
+	bool     x1_add = false;/* True, for load/store ADD instruction at X1*/
+	int      x1_add_imm8 = 0;
+	bool     unexpected = false;
+	int      n = 0, k;
+
+	jit_code_area =
+		(struct unaligned_jit_fragment *)(info->unalign_jit_base);
+
+	memset((void *)&frag, 0, sizeof(frag));
+
+	/* 0: X mode, Otherwise: Y mode. */
+	if (bundle & TILEGX_BUNDLE_MODE_MASK) {
+		unsigned int mod, opcode;
+
+		if (get_Opcode_Y1(bundle) == RRR_1_OPCODE_Y1 &&
+		    get_RRROpcodeExtension_Y1(bundle) ==
+		    UNARY_RRR_1_OPCODE_Y1) {
+
+			opcode = get_UnaryOpcodeExtension_Y1(bundle);
+
+			/*
+			 * Test "jalr", "jalrp", "jr", "jrp" instruction at Y1
+			 * pipeline.
+			 */
+			switch (opcode) {
+			case JALR_UNARY_OPCODE_Y1:
+			case JALRP_UNARY_OPCODE_Y1:
+				y1_lr = true;
+				y1_lr_reg = 55; /* Link register. */
+				/* FALLTHROUGH */
+			case JR_UNARY_OPCODE_Y1:
+			case JRP_UNARY_OPCODE_Y1:
+				y1_br = true;
+				y1_br_reg = get_SrcA_Y1(bundle);
+				break;
+			case LNK_UNARY_OPCODE_Y1:
+				/* "lnk" at Y1 pipeline. */
+				y1_lr = true;
+				y1_lr_reg = get_Dest_Y1(bundle);
+				break;
+			}
+		}
+
+		opcode = get_Opcode_Y2(bundle);
+		mod = get_Mode(bundle);
+
+		/*
+		 *  bundle_2 is bundle after making Y2 as a dummy operation
+		 *  - ld zero, sp
+		 */
+		bundle_2 = (bundle & (~GX_INSN_Y2_MASK)) | jit_y2_dummy();
+
+		/* Make Y1 as fnop if Y1 is a branch or lnk operation. */
+		if (y1_br || y1_lr) {
+			bundle_2 &= ~(GX_INSN_Y1_MASK);
+			bundle_2 |= jit_y1_fnop();
+		}
+
+		if (is_y0_y1_nop(bundle_2))
+			bundle_2_enable = false;
+
+		if (mod == MODE_OPCODE_YC2) {
+			/* Store. */
+			load_n_store = false;
+			load_store_size = 1 << opcode;
+			load_store_signed = false;
+			find_regs(bundle, 0, &ra, &rb, &clob1, &clob2,
+				  &clob3, &alias);
+			if (load_store_size > 8)
+				unexpected = true;
+		} else {
+			/* Load. */
+			load_n_store = true;
+			if (mod == MODE_OPCODE_YB2) {
+				switch (opcode) {
+				case LD_OPCODE_Y2:
+					load_store_signed = false;
+					load_store_size = 8;
+					break;
+				case LD4S_OPCODE_Y2:
+					load_store_signed = true;
+					load_store_size = 4;
+					break;
+				case LD4U_OPCODE_Y2:
+					load_store_signed = false;
+					load_store_size = 4;
+					break;
+				default:
+					unexpected = true;
+				}
+			} else if (mod == MODE_OPCODE_YA2) {
+				if (opcode == LD2S_OPCODE_Y2) {
+					load_store_signed = true;
+					load_store_size = 2;
+				} else if (opcode == LD2U_OPCODE_Y2) {
+					load_store_signed = false;
+					load_store_size = 2;
+				} else
+					unexpected = true;
+			} else
+				unexpected = true;
+			find_regs(bundle, &rd, &ra, &rb, &clob1, &clob2,
+				  &clob3, &alias);
+		}
+	} else {
+		unsigned int opcode;
+
+		/* bundle_2 is bundle after making X1 as "fnop". */
+		bundle_2 = (bundle & (~GX_INSN_X1_MASK)) | jit_x1_fnop();
+
+		if (is_x0_x1_nop(bundle_2))
+			bundle_2_enable = false;
+
+		if (get_Opcode_X1(bundle) == RRR_0_OPCODE_X1) {
+			opcode = get_UnaryOpcodeExtension_X1(bundle);
+
+			if (get_RRROpcodeExtension_X1(bundle) ==
+			    UNARY_RRR_0_OPCODE_X1) {
+				load_n_store = true;
+				find_regs(bundle, &rd, &ra, &rb, &clob1,
+					  &clob2, &clob3, &alias);
+
+				switch (opcode) {
+				case LD_UNARY_OPCODE_X1:
+					load_store_signed = false;
+					load_store_size = 8;
+					break;
+				case LD4S_UNARY_OPCODE_X1:
+					load_store_signed = true;
+					/* FALLTHROUGH */
+				case LD4U_UNARY_OPCODE_X1:
+					load_store_size = 4;
+					break;
+
+				case LD2S_UNARY_OPCODE_X1:
+					load_store_signed = true;
+					/* FALLTHROUGH */
+				case LD2U_UNARY_OPCODE_X1:
+					load_store_size = 2;
+					break;
+				default:
+					unexpected = true;
+				}
+			} else {
+				load_n_store = false;
+				load_store_signed = false;
+				find_regs(bundle, 0, &ra, &rb,
+					  &clob1, &clob2, &clob3,
+					  &alias);
+
+				opcode = get_RRROpcodeExtension_X1(bundle);
+				switch (opcode)	{
+				case ST_RRR_0_OPCODE_X1:
+					load_store_size = 8;
+					break;
+				case ST4_RRR_0_OPCODE_X1:
+					load_store_size = 4;
+					break;
+				case ST2_RRR_0_OPCODE_X1:
+					load_store_size = 2;
+					break;
+				default:
+					unexpected = true;
+				}
+			}
+		} else if (get_Opcode_X1(bundle) == IMM8_OPCODE_X1) {
+			load_n_store = true;
+			opcode = get_Imm8OpcodeExtension_X1(bundle);
+			switch (opcode)	{
+			case LD_ADD_IMM8_OPCODE_X1:
+				load_store_size = 8;
+				break;
+
+			case LD4S_ADD_IMM8_OPCODE_X1:
+				load_store_signed = true;
+				/* FALLTHROUGH */
+			case LD4U_ADD_IMM8_OPCODE_X1:
+				load_store_size = 4;
+				break;
+
+			case LD2S_ADD_IMM8_OPCODE_X1:
+				load_store_signed = true;
+				/* FALLTHROUGH */
+			case LD2U_ADD_IMM8_OPCODE_X1:
+				load_store_size = 2;
+				break;
+
+			case ST_ADD_IMM8_OPCODE_X1:
+				load_n_store = false;
+				load_store_size = 8;
+				break;
+			case ST4_ADD_IMM8_OPCODE_X1:
+				load_n_store = false;
+				load_store_size = 4;
+				break;
+			case ST2_ADD_IMM8_OPCODE_X1:
+				load_n_store = false;
+				load_store_size = 2;
+				break;
+			default:
+				unexpected = true;
+			}
+
+			if (!unexpected) {
+				x1_add = true;
+				if (load_n_store)
+					x1_add_imm8 = get_Imm8_X1(bundle);
+				else
+					x1_add_imm8 = get_Dest_Imm8_X1(bundle);
+			}
+
+			find_regs(bundle, load_n_store ? (&rd) : NULL,
+				  &ra, &rb, &clob1, &clob2, &clob3, &alias);
+		} else
+			unexpected = true;
+	}
+
+	/*
+	 * Some sanity check for register numbers extracted from fault bundle.
+	 */
+	if (check_regs(rd, ra, rb, clob1, clob2, clob3) == true)
+		unexpected = true;
+
+	/* Give warning if register ra has an aligned address. */
+	if (!unexpected)
+		WARN_ON(!((load_store_size - 1) & (regs->regs[ra])));
+
+
+	/*
+	 * Fault came from kernel space, here we only need take care of
+	 * unaligned "get_user/put_user" macros defined in "uaccess.h".
+	 * Basically, we will handle bundle like this:
+	 * {ld/2u/4s rd, ra; movei rx, 0} or {st/2/4 ra, rb; movei rx, 0}
+	 * (Refer to file "arch/tile/include/asm/uaccess.h" for details).
+	 * For either load or store, byte-wise operation is performed by calling
+	 * get_user() or put_user(). If the macro returns non-zero value,
+	 * set the value to rx, otherwise set zero to rx. Finally make pc point
+	 * to next bundle and return.
+	 */
+
+	if (EX1_PL(regs->ex1) != USER_PL) {
+
+		unsigned long rx = 0;
+		unsigned long x = 0, ret = 0;
+
+		if (y1_br || y1_lr || x1_add ||
+		    (load_store_signed !=
+		     (load_n_store && load_store_size == 4))) {
+			/* No branch, link, wrong sign-ext or load/store add. */
+			unexpected = true;
+		} else if (!unexpected) {
+			if (bundle & TILEGX_BUNDLE_MODE_MASK) {
+				/*
+				 * Fault bundle is Y mode.
+				 * Check if the Y1 and Y0 is the form of
+				 * { movei rx, 0; nop/fnop }, if yes,
+				 * find the rx.
+				 */
+
+				if ((get_Opcode_Y1(bundle) == ADDI_OPCODE_Y1)
+				    && (get_SrcA_Y1(bundle) == TREG_ZERO) &&
+				    (get_Imm8_Y1(bundle) == 0) &&
+				    is_bundle_y0_nop(bundle)) {
+					rx = get_Dest_Y1(bundle);
+				} else if ((get_Opcode_Y0(bundle) ==
+					    ADDI_OPCODE_Y0) &&
+					   (get_SrcA_Y0(bundle) == TREG_ZERO) &&
+					   (get_Imm8_Y0(bundle) == 0) &&
+					   is_bundle_y1_nop(bundle)) {
+					rx = get_Dest_Y0(bundle);
+				} else {
+					unexpected = true;
+				}
+			} else {
+				/*
+				 * Fault bundle is X mode.
+				 * Check if the X0 is 'movei rx, 0',
+				 * if yes, find the rx.
+				 */
+
+				if ((get_Opcode_X0(bundle) == IMM8_OPCODE_X0)
+				    && (get_Imm8OpcodeExtension_X0(bundle) ==
+					ADDI_IMM8_OPCODE_X0) &&
+				    (get_SrcA_X0(bundle) == TREG_ZERO) &&
+				    (get_Imm8_X0(bundle) == 0)) {
+					rx = get_Dest_X0(bundle);
+				} else {
+					unexpected = true;
+				}
+			}
+
+			/* rx should be less than 56. */
+			if (!unexpected && (rx >= 56))
+				unexpected = true;
+		}
+
+		if (!search_exception_tables(regs->pc)) {
+			/* No fixup in the exception tables for the pc. */
+			unexpected = true;
+		}
+
+		if (unexpected) {
+			/* Unexpected unalign kernel fault. */
+			struct task_struct *tsk = validate_current();
+
+			bust_spinlocks(1);
+
+			show_regs(regs);
+
+			if (unlikely(tsk->pid < 2)) {
+				panic("Kernel unalign fault running %s!",
+				      tsk->pid ? "init" : "the idle task");
+			}
+#ifdef SUPPORT_DIE
+			die("Oops", regs);
+#endif
+			bust_spinlocks(1);
+
+			do_group_exit(SIGKILL);
+
+		} else {
+			unsigned long i, b = 0;
+			unsigned char *ptr =
+				(unsigned char *)regs->regs[ra];
+			if (load_n_store) {
+				/* handle get_user(x, ptr) */
+				for (i = 0; i < load_store_size; i++) {
+					ret = get_user(b, ptr++);
+					if (!ret) {
+						/* Success! update x. */
+#ifdef __LITTLE_ENDIAN
+						x |= (b << (8 * i));
+#else
+						x <<= 8;
+						x |= b;
+#endif /* __LITTLE_ENDIAN */
+					} else {
+						x = 0;
+						break;
+					}
+				}
+
+				/* Sign-extend 4-byte loads. */
+				if (load_store_size == 4)
+					x = (long)(int)x;
+
+				/* Set register rd. */
+				regs->regs[rd] = x;
+
+				/* Set register rx. */
+				regs->regs[rx] = ret;
+
+				/* Bump pc. */
+				regs->pc += 8;
+
+			} else {
+				/* Handle put_user(x, ptr) */
+				x = regs->regs[rb];
+#ifdef __LITTLE_ENDIAN
+				b = x;
+#else
+				/*
+				 * Swap x in order to store x from low
+				 * to high memory same as the
+				 * little-endian case.
+				 */
+				switch (load_store_size) {
+				case 8:
+					b = swab64(x);
+					break;
+				case 4:
+					b = swab32(x);
+					break;
+				case 2:
+					b = swab16(x);
+					break;
+				}
+#endif /* __LITTLE_ENDIAN */
+				for (i = 0; i < load_store_size; i++) {
+					ret = put_user(b, ptr++);
+					if (ret)
+						break;
+					/* Success! shift 1 byte. */
+					b >>= 8;
+				}
+				/* Set register rx. */
+				regs->regs[rx] = ret;
+
+				/* Bump pc. */
+				regs->pc += 8;
+			}
+		}
+
+		unaligned_fixup_count++;
+
+		if (unaligned_printk) {
+			pr_info("%s/%d. Unalign fixup for kernel access "
+				"to userspace %lx.",
+				current->comm, current->pid, regs->regs[ra]);
+		}
+
+		/* Done! Return to the exception handler. */
+		return;
+	}
+
+	if ((align_ctl == 0) || unexpected) {
+		siginfo_t info = {
+			.si_signo = SIGBUS,
+			.si_code = BUS_ADRALN,
+			.si_addr = (unsigned char __user *)0
+		};
+		if (unaligned_printk)
+			pr_info("Unalign bundle: unexp @%llx, %llx",
+				(unsigned long long)regs->pc,
+				(unsigned long long)bundle);
+
+		if (ra < 56) {
+			unsigned long uaa = (unsigned long)regs->regs[ra];
+			/* Set bus Address. */
+			info.si_addr = (unsigned char __user *)uaa;
+		}
+
+		unaligned_fixup_count++;
+
+		trace_unhandled_signal("unaligned fixup trap", regs,
+				       (unsigned long)info.si_addr, SIGBUS);
+		force_sig_info(info.si_signo, &info, current);
+		return;
+	}
+
+#ifdef __LITTLE_ENDIAN
+#define UA_FIXUP_ADDR_DELTA          1
+#define UA_FIXUP_BFEXT_START(_B_)    0
+#define UA_FIXUP_BFEXT_END(_B_)     (8 * (_B_) - 1)
+#else /* __BIG_ENDIAN */
+#define UA_FIXUP_ADDR_DELTA          -1
+#define UA_FIXUP_BFEXT_START(_B_)   (64 - 8 * (_B_))
+#define UA_FIXUP_BFEXT_END(_B_)      63
+#endif /* __LITTLE_ENDIAN */
+
+
+
+	if ((ra != rb) && (rd != TREG_SP) && !alias &&
+	    !y1_br && !y1_lr && !x1_add) {
+		/*
+		 * Simple case: ra != rb and no register alias found,
+		 * and no branch or link. This will be the majority.
+		 * We can do a little better for simplae case than the
+		 * generic scheme below.
+		 */
+		if (!load_n_store) {
+			/*
+			 * Simple store: ra != rb, no need for scratch register.
+			 * Just store and rotate to right bytewise.
+			 */
+#ifdef __BIG_ENDIAN
+			frag.insn[n++] =
+				jit_x0_addi(ra, ra, load_store_size - 1) |
+				jit_x1_fnop();
+#endif /* __BIG_ENDIAN */
+			for (k = 0; k < load_store_size; k++) {
+				/* Store a byte. */
+				frag.insn[n++] =
+					jit_x0_rotli(rb, rb, 56) |
+					jit_x1_st1_add(ra, rb,
+						       UA_FIXUP_ADDR_DELTA);
+			}
+#ifdef __BIG_ENDIAN
+			frag.insn[n] = jit_x1_addi(ra, ra, 1);
+#else
+			frag.insn[n] = jit_x1_addi(ra, ra,
+						   -1 * load_store_size);
+#endif /* __LITTLE_ENDIAN */
+
+			if (load_store_size == 8) {
+				frag.insn[n] |= jit_x0_fnop();
+			} else if (load_store_size == 4) {
+				frag.insn[n] |= jit_x0_rotli(rb, rb, 32);
+			} else { /* = 2 */
+				frag.insn[n] |= jit_x0_rotli(rb, rb, 16);
+			}
+			n++;
+			if (bundle_2_enable)
+				frag.insn[n++] = bundle_2;
+			frag.insn[n++] = jit_x0_fnop() | jit_x1_iret();
+		} else {
+			if (rd == ra) {
+				/* Use two clobber registers: clob1/2. */
+				frag.insn[n++] =
+					jit_x0_addi(TREG_SP, TREG_SP, -16) |
+					jit_x1_fnop();
+				frag.insn[n++] =
+					jit_x0_addi(clob1, ra, 7) |
+					jit_x1_st_add(TREG_SP, clob1, -8);
+				frag.insn[n++] =
+					jit_x0_addi(clob2, ra, 0) |
+					jit_x1_st(TREG_SP, clob2);
+				frag.insn[n++] =
+					jit_x0_fnop() |
+					jit_x1_ldna(rd, ra);
+				frag.insn[n++] =
+					jit_x0_fnop() |
+					jit_x1_ldna(clob1, clob1);
+				/*
+				 * Note: we must make sure that rd must not
+				 * be sp. Recover clob1/2 from stack.
+				 */
+				frag.insn[n++] =
+					jit_x0_dblalign(rd, clob1, clob2) |
+					jit_x1_ld_add(clob2, TREG_SP, 8);
+				frag.insn[n++] =
+					jit_x0_fnop() |
+					jit_x1_ld_add(clob1, TREG_SP, 16);
+			} else {
+				/* Use one clobber register: clob1 only. */
+				frag.insn[n++] =
+					jit_x0_addi(TREG_SP, TREG_SP, -16) |
+					jit_x1_fnop();
+				frag.insn[n++] =
+					jit_x0_addi(clob1, ra, 7) |
+					jit_x1_st(TREG_SP, clob1);
+				frag.insn[n++] =
+					jit_x0_fnop() |
+					jit_x1_ldna(rd, ra);
+				frag.insn[n++] =
+					jit_x0_fnop() |
+					jit_x1_ldna(clob1, clob1);
+				/*
+				 * Note: we must make sure that rd must not
+				 * be sp. Recover clob1 from stack.
+				 */
+				frag.insn[n++] =
+					jit_x0_dblalign(rd, clob1, ra) |
+					jit_x1_ld_add(clob1, TREG_SP, 16);
+			}
+
+			if (bundle_2_enable)
+				frag.insn[n++] = bundle_2;
+			/*
+			 * For non 8-byte load, extract corresponding bytes and
+			 * signed extension.
+			 */
+			if (load_store_size == 4) {
+				if (load_store_signed)
+					frag.insn[n++] =
+						jit_x0_bfexts(
+							rd, rd,
+							UA_FIXUP_BFEXT_START(4),
+							UA_FIXUP_BFEXT_END(4)) |
+						jit_x1_fnop();
+				else
+					frag.insn[n++] =
+						jit_x0_bfextu(
+							rd, rd,
+							UA_FIXUP_BFEXT_START(4),
+							UA_FIXUP_BFEXT_END(4)) |
+						jit_x1_fnop();
+			} else if (load_store_size == 2) {
+				if (load_store_signed)
+					frag.insn[n++] =
+						jit_x0_bfexts(
+							rd, rd,
+							UA_FIXUP_BFEXT_START(2),
+							UA_FIXUP_BFEXT_END(2)) |
+						jit_x1_fnop();
+				else
+					frag.insn[n++] =
+						jit_x0_bfextu(
+							rd, rd,
+							UA_FIXUP_BFEXT_START(2),
+							UA_FIXUP_BFEXT_END(2)) |
+						jit_x1_fnop();
+			}
+
+			frag.insn[n++] =
+				jit_x0_fnop()  |
+				jit_x1_iret();
+		}
+	} else if (!load_n_store) {
+
+		/*
+		 * Generic memory store cases: use 3 clobber registers.
+		 *
+		 * Alloc space for saveing clob2,1,3 on user's stack.
+		 * register clob3 points to where clob2 saved, followed by
+		 * clob1 and 3 from high to low memory.
+		 */
+		frag.insn[n++] =
+			jit_x0_addi(TREG_SP, TREG_SP, -32)    |
+			jit_x1_fnop();
+		frag.insn[n++] =
+			jit_x0_addi(clob3, TREG_SP, 16)  |
+			jit_x1_st_add(TREG_SP, clob3, 8);
+#ifdef __LITTLE_ENDIAN
+		frag.insn[n++] =
+			jit_x0_addi(clob1, ra, 0)   |
+			jit_x1_st_add(TREG_SP, clob1, 8);
+#else
+		frag.insn[n++] =
+			jit_x0_addi(clob1, ra, load_store_size - 1)   |
+			jit_x1_st_add(TREG_SP, clob1, 8);
+#endif
+		if (load_store_size == 8) {
+			/*
+			 * We save one byte a time, not for fast, but compact
+			 * code. After each store, data source register shift
+			 * right one byte. unchanged after 8 stores.
+			 */
+			frag.insn[n++] =
+				jit_x0_addi(clob2, TREG_ZERO, 7)     |
+				jit_x1_st_add(TREG_SP, clob2, 16);
+			frag.insn[n++] =
+				jit_x0_rotli(rb, rb, 56)      |
+				jit_x1_st1_add(clob1, rb, UA_FIXUP_ADDR_DELTA);
+			frag.insn[n++] =
+				jit_x0_addi(clob2, clob2, -1) |
+				jit_x1_bnezt(clob2, -1);
+			frag.insn[n++] =
+				jit_x0_fnop()                 |
+				jit_x1_addi(clob2, y1_br_reg, 0);
+		} else if (load_store_size == 4) {
+			frag.insn[n++] =
+				jit_x0_addi(clob2, TREG_ZERO, 3)     |
+				jit_x1_st_add(TREG_SP, clob2, 16);
+			frag.insn[n++] =
+				jit_x0_rotli(rb, rb, 56)      |
+				jit_x1_st1_add(clob1, rb, UA_FIXUP_ADDR_DELTA);
+			frag.insn[n++] =
+				jit_x0_addi(clob2, clob2, -1) |
+				jit_x1_bnezt(clob2, -1);
+			/*
+			 * same as 8-byte case, but need shift another 4
+			 * byte to recover rb for 4-byte store.
+			 */
+			frag.insn[n++] = jit_x0_rotli(rb, rb, 32)      |
+				jit_x1_addi(clob2, y1_br_reg, 0);
+		} else { /* =2 */
+			frag.insn[n++] =
+				jit_x0_addi(clob2, rb, 0)     |
+				jit_x1_st_add(TREG_SP, clob2, 16);
+			for (k = 0; k < 2; k++) {
+				frag.insn[n++] =
+					jit_x0_shrui(rb, rb, 8)  |
+					jit_x1_st1_add(clob1, rb,
+						       UA_FIXUP_ADDR_DELTA);
+			}
+			frag.insn[n++] =
+				jit_x0_addi(rb, clob2, 0)       |
+				jit_x1_addi(clob2, y1_br_reg, 0);
+		}
+
+		if (bundle_2_enable)
+			frag.insn[n++] = bundle_2;
+
+		if (y1_lr) {
+			frag.insn[n++] =
+				jit_x0_fnop()                    |
+				jit_x1_mfspr(y1_lr_reg,
+					     SPR_EX_CONTEXT_0_0);
+		}
+		if (y1_br) {
+			frag.insn[n++] =
+				jit_x0_fnop()                    |
+				jit_x1_mtspr(SPR_EX_CONTEXT_0_0,
+					     clob2);
+		}
+		if (x1_add) {
+			frag.insn[n++] =
+				jit_x0_addi(ra, ra, x1_add_imm8) |
+				jit_x1_ld_add(clob2, clob3, -8);
+		} else {
+			frag.insn[n++] =
+				jit_x0_fnop()                    |
+				jit_x1_ld_add(clob2, clob3, -8);
+		}
+		frag.insn[n++] =
+			jit_x0_fnop()   |
+			jit_x1_ld_add(clob1, clob3, -8);
+		frag.insn[n++] = jit_x0_fnop()   | jit_x1_ld(clob3, clob3);
+		frag.insn[n++] = jit_x0_fnop()   | jit_x1_iret();
+
+	} else {
+		/*
+		 * Generic memory load cases.
+		 *
+		 * Alloc space for saveing clob1,2,3 on user's stack.
+		 * register clob3 points to where clob1 saved, followed
+		 * by clob2 and 3 from high to low memory.
+		 */
+
+		frag.insn[n++] =
+			jit_x0_addi(TREG_SP, TREG_SP, -32) |
+			jit_x1_fnop();
+		frag.insn[n++] =
+			jit_x0_addi(clob3, TREG_SP, 16) |
+			jit_x1_st_add(TREG_SP, clob3, 8);
+		frag.insn[n++] =
+			jit_x0_addi(clob2, ra, 0) |
+			jit_x1_st_add(TREG_SP, clob2, 8);
+
+		if (y1_br) {
+			frag.insn[n++] =
+				jit_x0_addi(clob1, y1_br_reg, 0) |
+				jit_x1_st_add(TREG_SP, clob1, 16);
+		} else {
+			frag.insn[n++] =
+				jit_x0_fnop() |
+				jit_x1_st_add(TREG_SP, clob1, 16);
+		}
+
+		if (bundle_2_enable)
+			frag.insn[n++] = bundle_2;
+
+		if (y1_lr) {
+			frag.insn[n++] =
+				jit_x0_fnop()  |
+				jit_x1_mfspr(y1_lr_reg,
+					     SPR_EX_CONTEXT_0_0);
+		}
+
+		if (y1_br) {
+			frag.insn[n++] =
+				jit_x0_fnop() |
+				jit_x1_mtspr(SPR_EX_CONTEXT_0_0,
+					     clob1);
+		}
+
+		frag.insn[n++] =
+			jit_x0_addi(clob1, clob2, 7)      |
+			jit_x1_ldna(rd, clob2);
+		frag.insn[n++] =
+			jit_x0_fnop()                     |
+			jit_x1_ldna(clob1, clob1);
+		frag.insn[n++] =
+			jit_x0_dblalign(rd, clob1, clob2) |
+			jit_x1_ld_add(clob1, clob3, -8);
+		if (x1_add) {
+			frag.insn[n++] =
+				jit_x0_addi(ra, ra, x1_add_imm8) |
+				jit_x1_ld_add(clob2, clob3, -8);
+		} else {
+			frag.insn[n++] =
+				jit_x0_fnop()  |
+				jit_x1_ld_add(clob2, clob3, -8);
+		}
+
+		frag.insn[n++] =
+			jit_x0_fnop() |
+			jit_x1_ld(clob3, clob3);
+
+		if (load_store_size == 4) {
+			if (load_store_signed)
+				frag.insn[n++] =
+					jit_x0_bfexts(
+						rd, rd,
+						UA_FIXUP_BFEXT_START(4),
+						UA_FIXUP_BFEXT_END(4)) |
+					jit_x1_fnop();
+			else
+				frag.insn[n++] =
+					jit_x0_bfextu(
+						rd, rd,
+						UA_FIXUP_BFEXT_START(4),
+						UA_FIXUP_BFEXT_END(4)) |
+					jit_x1_fnop();
+		} else if (load_store_size == 2) {
+			if (load_store_signed)
+				frag.insn[n++] =
+					jit_x0_bfexts(
+						rd, rd,
+						UA_FIXUP_BFEXT_START(2),
+						UA_FIXUP_BFEXT_END(2)) |
+					jit_x1_fnop();
+			else
+				frag.insn[n++] =
+					jit_x0_bfextu(
+						rd, rd,
+						UA_FIXUP_BFEXT_START(2),
+						UA_FIXUP_BFEXT_END(2)) |
+					jit_x1_fnop();
+		}
+
+		frag.insn[n++] = jit_x0_fnop() | jit_x1_iret();
+	}
+
+	/* Max JIT bundle count is 14. */
+	WARN_ON(n > 14);
+
+	if (!unexpected) {
+		int status = 0;
+		int idx = (regs->pc >> 3) &
+			((1ULL << (PAGE_SHIFT - UNALIGN_JIT_SHIFT)) - 1);
+
+		frag.pc = regs->pc;
+		frag.bundle = bundle;
+
+		if (unaligned_printk) {
+			pr_info("%s/%d, Unalign fixup: pc=%lx "
+				"bundle=%lx %d %d %d %d %d %d %d %d.",
+				current->comm, current->pid,
+				(unsigned long)frag.pc,
+				(unsigned long)frag.bundle,
+				(int)alias, (int)rd, (int)ra,
+				(int)rb, (int)bundle_2_enable,
+				(int)y1_lr, (int)y1_br, (int)x1_add);
+
+			for (k = 0; k < n; k += 2)
+				pr_info("[%d] %016llx %016llx", k,
+					(unsigned long long)frag.insn[k],
+					(unsigned long long)frag.insn[k+1]);
+		}
+
+		/* Swap bundle byte order for big endian sys. */
+#ifdef __BIG_ENDIAN
+		frag.bundle = GX_INSN_BSWAP(frag.bundle);
+		for (k = 0; k < n; k++)
+			frag.insn[k] = GX_INSN_BSWAP(frag.insn[k]);
+#endif /* __BIG_ENDIAN */
+
+		status = copy_to_user((void __user *)&jit_code_area[idx],
+				      &frag, sizeof(frag));
+		if (status) {
+			/* Fail to copy JIT into user land. send SIGSEGV. */
+			siginfo_t info = {
+				.si_signo = SIGSEGV,
+				.si_code = SEGV_MAPERR,
+				.si_addr = (void __user *)&jit_code_area[idx]
+			};
+
+			pr_warn("Unalign fixup: pid=%d %s jit_code_area=%llx",
+				current->pid, current->comm,
+				(unsigned long long)&jit_code_area[idx]);
+
+			trace_unhandled_signal("segfault in unalign fixup",
+					       regs,
+					       (unsigned long)info.si_addr,
+					       SIGSEGV);
+			force_sig_info(info.si_signo, &info, current);
+			return;
+		}
+
+
+		/* Do a cheaper increment, not accurate. */
+		unaligned_fixup_count++;
+		__flush_icache_range((unsigned long)&jit_code_area[idx],
+				     (unsigned long)&jit_code_area[idx] +
+				     sizeof(frag));
+
+		/* Setup SPR_EX_CONTEXT_0_0/1 for returning to user program.*/
+		__insn_mtspr(SPR_EX_CONTEXT_0_0, regs->pc + 8);
+		__insn_mtspr(SPR_EX_CONTEXT_0_1, PL_ICS_EX1(USER_PL, 0));
+
+		/* Modify pc at the start of new JIT. */
+		regs->pc = (unsigned long)&jit_code_area[idx].insn[0];
+		/* Set ICS in SPR_EX_CONTEXT_K_1. */
+		regs->ex1 = PL_ICS_EX1(USER_PL, 1);
+	}
+}
+
+
+/*
+ * C function to generate unalign data JIT. Called from unalign data
+ * interrupt handler.
+ *
+ * First check if unalign fix is disabled or exception did not not come from
+ * user space or sp register points to unalign address, if true, generate a
+ * SIGBUS. Then map a page into user space as JIT area if it is not mapped
+ * yet. Genenerate JIT code by calling jit_bundle_gen(). After that return
+ * back to exception handler.
+ *
+ * The exception handler will "iret" to new generated JIT code after
+ * restoring caller saved registers. In theory, the JIT code will perform
+ * another "iret" to resume user's program.
+ */
+
+void do_unaligned(struct pt_regs *regs, int vecnum)
+{
+	tilegx_bundle_bits __user  *pc;
+	tilegx_bundle_bits bundle;
+	struct thread_info *info = current_thread_info();
+	int align_ctl;
+
+	/* Checks the per-process unaligned JIT flags */
+	align_ctl = unaligned_fixup;
+	switch (task_thread_info(current)->align_ctl) {
+	case PR_UNALIGN_NOPRINT:
+		align_ctl = 1;
+		break;
+	case PR_UNALIGN_SIGBUS:
+		align_ctl = 0;
+		break;
+	}
+
+	/* Enable iterrupt in order to access user land. */
+	local_irq_enable();
+
+	/*
+	 * The fault came from kernel space. Two choices:
+	 * (a) unaligned_fixup < 1, we will first call get/put_user fixup
+	 *     to return -EFAULT. If no fixup, simply panic the kernel.
+	 * (b) unaligned_fixup >=1, we will try to fix the unaligned access
+	 *     if it was triggered by get_user/put_user() macros. Panic the
+	 *     kernel if it is not fixable.
+	 */
+
+	if (EX1_PL(regs->ex1) != USER_PL) {
+
+		if (align_ctl < 1) {
+			unaligned_fixup_count++;
+			/* If exception came from kernel, try fix it up. */
+			if (fixup_exception(regs)) {
+				if (unaligned_printk)
+					pr_info("Unalign fixup: %d %llx @%llx",
+						(int)unaligned_fixup,
+						(unsigned long long)regs->ex1,
+						(unsigned long long)regs->pc);
+				return;
+			}
+			/* Not fixable. Go panic. */
+			panic("Unalign exception in Kernel. pc=%lx",
+			      regs->pc);
+			return;
+		} else {
+			/*
+			 * Try to fix the exception. If we can't, panic the
+			 * kernel.
+			 */
+			bundle = GX_INSN_BSWAP(
+				*((tilegx_bundle_bits *)(regs->pc)));
+			jit_bundle_gen(regs, bundle, align_ctl);
+			return;
+		}
+	}
+
+	/*
+	 * Fault came from user with ICS or stack is not aligned.
+	 * If so, we will trigger SIGBUS.
+	 */
+	if ((regs->sp & 0x7) || (regs->ex1) || (align_ctl < 0)) {
+		siginfo_t info = {
+			.si_signo = SIGBUS,
+			.si_code = BUS_ADRALN,
+			.si_addr = (unsigned char __user *)0
+		};
+
+		if (unaligned_printk)
+			pr_info("Unalign fixup: %d %llx @%llx",
+				(int)unaligned_fixup,
+				(unsigned long long)regs->ex1,
+				(unsigned long long)regs->pc);
+
+		unaligned_fixup_count++;
+
+		trace_unhandled_signal("unaligned fixup trap", regs, 0, SIGBUS);
+		force_sig_info(info.si_signo, &info, current);
+		return;
+	}
+
+
+	/* Read the bundle casued the exception! */
+	pc = (tilegx_bundle_bits __user *)(regs->pc);
+	if (get_user(bundle, pc) != 0) {
+		/* Probably never be here since pc is valid user address.*/
+		siginfo_t info = {
+			.si_signo = SIGSEGV,
+			.si_code = SEGV_MAPERR,
+			.si_addr = (void __user *)pc
+		};
+		pr_err("Couldn't read instruction at %p trying to step\n", pc);
+		trace_unhandled_signal("segfault in unalign fixup", regs,
+				       (unsigned long)info.si_addr, SIGSEGV);
+		force_sig_info(info.si_signo, &info, current);
+		return;
+	}
+
+	if (!info->unalign_jit_base) {
+		void __user *user_page;
+
+		/*
+		 * Allocate a page in userland.
+		 * For 64-bit processes we try to place the mapping far
+		 * from anything else that might be going on (specifically
+		 * 64 GB below the top of the user address space).  If it
+		 * happens not to be possible to put it there, it's OK;
+		 * the kernel will choose another location and we'll
+		 * remember it for later.
+		 */
+		if (is_compat_task())
+			user_page = NULL;
+		else
+			user_page = (void __user *)(TASK_SIZE - (1UL << 36)) +
+				(current->pid << PAGE_SHIFT);
+
+		user_page = (void __user *) vm_mmap(NULL,
+						    (unsigned long)user_page,
+						    PAGE_SIZE,
+						    PROT_EXEC | PROT_READ |
+						    PROT_WRITE,
+#ifdef CONFIG_HOMECACHE
+						    MAP_CACHE_HOME_TASK |
+#endif
+						    MAP_PRIVATE |
+						    MAP_ANONYMOUS,
+						    0);
+
+		if (IS_ERR((void __force *)user_page)) {
+			pr_err("Out of kernel pages trying do_mmap.\n");
+			return;
+		}
+
+		/* Save the address in the thread_info struct */
+		info->unalign_jit_base = user_page;
+		if (unaligned_printk)
+			pr_info("Unalign bundle: %d:%d, allocate page @%llx",
+				raw_smp_processor_id(), current->pid,
+				(unsigned long long)user_page);
+	}
+
+	/* Generate unalign JIT */
+	jit_bundle_gen(regs, GX_INSN_BSWAP(bundle), align_ctl);
+}
+
+#endif /* __tilegx__ */
diff --git a/arch/tile/kernel/vdso.c b/arch/tile/kernel/vdso.c
new file mode 100644
index 0000000..1533af2
--- /dev/null
+++ b/arch/tile/kernel/vdso.c
@@ -0,0 +1,212 @@
+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/binfmts.h>
+#include <linux/compat.h>
+#include <linux/elf.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+
+#include <asm/vdso.h>
+#include <asm/mman.h>
+#include <asm/sections.h>
+
+#include <arch/sim.h>
+
+/* The alignment of the vDSO. */
+#define VDSO_ALIGNMENT  PAGE_SIZE
+
+
+static unsigned int vdso_pages;
+static struct page **vdso_pagelist;
+
+#ifdef CONFIG_COMPAT
+static unsigned int vdso32_pages;
+static struct page **vdso32_pagelist;
+#endif
+static int vdso_ready;
+
+/*
+ * The vdso data page.
+ */
+static union {
+	struct vdso_data	data;
+	u8			page[PAGE_SIZE];
+} vdso_data_store __page_aligned_data;
+
+struct vdso_data *vdso_data = &vdso_data_store.data;
+
+static unsigned int __read_mostly vdso_enabled = 1;
+
+static struct page **vdso_setup(void *vdso_kbase, unsigned int pages)
+{
+	int i;
+	struct page **pagelist;
+
+	pagelist = kzalloc(sizeof(struct page *) * (pages + 1), GFP_KERNEL);
+	BUG_ON(pagelist == NULL);
+	for (i = 0; i < pages - 1; i++) {
+		struct page *pg = virt_to_page(vdso_kbase + i*PAGE_SIZE);
+		ClearPageReserved(pg);
+		pagelist[i] = pg;
+	}
+	pagelist[pages - 1] = virt_to_page(vdso_data);
+	pagelist[pages] = NULL;
+
+	return pagelist;
+}
+
+static int __init vdso_init(void)
+{
+	int data_pages = sizeof(vdso_data_store) >> PAGE_SHIFT;
+
+	/*
+	 * We can disable vDSO support generally, but we need to retain
+	 * one page to support the two-bundle (16-byte) rt_sigreturn path.
+	 */
+	if (!vdso_enabled) {
+		size_t offset = (unsigned long)&__vdso_rt_sigreturn;
+		static struct page *sigret_page;
+		sigret_page = alloc_page(GFP_KERNEL | __GFP_ZERO);
+		BUG_ON(sigret_page == NULL);
+		vdso_pagelist = &sigret_page;
+		vdso_pages = 1;
+		BUG_ON(offset >= PAGE_SIZE);
+		memcpy(page_address(sigret_page) + offset,
+		       vdso_start + offset, 16);
+#ifdef CONFIG_COMPAT
+		vdso32_pages = vdso_pages;
+		vdso32_pagelist = vdso_pagelist;
+#endif
+		vdso_ready = 1;
+		return 0;
+	}
+
+	vdso_pages = (vdso_end - vdso_start) >> PAGE_SHIFT;
+	vdso_pages += data_pages;
+	vdso_pagelist = vdso_setup(vdso_start, vdso_pages);
+
+#ifdef CONFIG_COMPAT
+	vdso32_pages = (vdso32_end - vdso32_start) >> PAGE_SHIFT;
+	vdso32_pages += data_pages;
+	vdso32_pagelist = vdso_setup(vdso32_start, vdso32_pages);
+#endif
+
+	smp_wmb();
+	vdso_ready = 1;
+
+	return 0;
+}
+arch_initcall(vdso_init);
+
+const char *arch_vma_name(struct vm_area_struct *vma)
+{
+	if (vma->vm_mm && vma->vm_start == VDSO_BASE)
+		return "[vdso]";
+#ifndef __tilegx__
+	if (vma->vm_start == MEM_USER_INTRPT)
+		return "[intrpt]";
+#endif
+	return NULL;
+}
+
+struct vm_area_struct *get_gate_vma(struct mm_struct *mm)
+{
+	return NULL;
+}
+
+int in_gate_area(struct mm_struct *mm, unsigned long address)
+{
+	return 0;
+}
+
+int in_gate_area_no_mm(unsigned long address)
+{
+	return 0;
+}
+
+int setup_vdso_pages(void)
+{
+	struct page **pagelist;
+	unsigned long pages;
+	struct mm_struct *mm = current->mm;
+	unsigned long vdso_base = 0;
+	int retval = 0;
+
+	if (!vdso_ready)
+		return 0;
+
+	mm->context.vdso_base = 0;
+
+	pagelist = vdso_pagelist;
+	pages = vdso_pages;
+#ifdef CONFIG_COMPAT
+	if (is_compat_task()) {
+		pagelist = vdso32_pagelist;
+		pages = vdso32_pages;
+	}
+#endif
+
+	/*
+	 * vDSO has a problem and was disabled, just don't "enable" it for the
+	 * process.
+	 */
+	if (pages == 0)
+		return 0;
+
+	vdso_base = get_unmapped_area(NULL, vdso_base,
+				      (pages << PAGE_SHIFT) +
+				      ((VDSO_ALIGNMENT - 1) & PAGE_MASK),
+				      0, 0);
+	if (IS_ERR_VALUE(vdso_base)) {
+		retval = vdso_base;
+		return retval;
+	}
+
+	/* Add required alignment. */
+	vdso_base = ALIGN(vdso_base, VDSO_ALIGNMENT);
+
+	/*
+	 * Put vDSO base into mm struct. We need to do this before calling
+	 * install_special_mapping or the perf counter mmap tracking code
+	 * will fail to recognise it as a vDSO (since arch_vma_name fails).
+	 */
+	mm->context.vdso_base = vdso_base;
+
+	/*
+	 * our vma flags don't have VM_WRITE so by default, the process isn't
+	 * allowed to write those pages.
+	 * gdb can break that with ptrace interface, and thus trigger COW on
+	 * those pages but it's then your responsibility to never do that on
+	 * the "data" page of the vDSO or you'll stop getting kernel updates
+	 * and your nice userland gettimeofday will be totally dead.
+	 * It's fine to use that for setting breakpoints in the vDSO code
+	 * pages though
+	 */
+	retval = install_special_mapping(mm, vdso_base,
+					 pages << PAGE_SHIFT,
+					 VM_READ|VM_EXEC |
+					 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
+					 pagelist);
+	if (retval)
+		mm->context.vdso_base = 0;
+
+	return retval;
+}
+
+static __init int vdso_func(char *s)
+{
+	return kstrtouint(s, 0, &vdso_enabled);
+}
+__setup("vdso=", vdso_func);
diff --git a/arch/tile/kernel/vdso/Makefile b/arch/tile/kernel/vdso/Makefile
new file mode 100644
index 0000000..e2b7a2f
--- /dev/null
+++ b/arch/tile/kernel/vdso/Makefile
@@ -0,0 +1,118 @@
+# Symbols present in the vdso
+vdso-syms = rt_sigreturn gettimeofday
+
+# Files to link into the vdso
+obj-vdso = $(patsubst %, v%.o, $(vdso-syms))
+
+# Build rules
+targets := $(obj-vdso) vdso.so vdso.so.dbg vdso.lds
+obj-vdso := $(addprefix $(obj)/, $(obj-vdso))
+
+# vdso32 is only for tilegx -m32 compat task.
+VDSO32-$(CONFIG_COMPAT) := y
+
+obj-y += vdso.o
+obj-$(VDSO32-y) += vdso32.o
+extra-y += vdso.lds
+CPPFLAGS_vdso.lds += -P -C -U$(ARCH)
+
+# vDSO code runs in userspace and -pg doesn't help with profiling anyway.
+CFLAGS_REMOVE_vdso.o = -pg
+CFLAGS_REMOVE_vdso32.o = -pg
+CFLAGS_REMOVE_vrt_sigreturn.o = -pg
+CFLAGS_REMOVE_vrt_sigreturn32.o = -pg
+CFLAGS_REMOVE_vgettimeofday.o = -pg
+CFLAGS_REMOVE_vgettimeofday32.o = -pg
+
+ifdef CONFIG_FEEDBACK_COLLECT
+# vDSO code runs in userspace, not collecting feedback data.
+CFLAGS_REMOVE_vdso.o = -ffeedback-generate
+CFLAGS_REMOVE_vdso32.o = -ffeedback-generate
+CFLAGS_REMOVE_vrt_sigreturn.o = -ffeedback-generate
+CFLAGS_REMOVE_vrt_sigreturn32.o = -ffeedback-generate
+CFLAGS_REMOVE_vgettimeofday.o = -ffeedback-generate
+CFLAGS_REMOVE_vgettimeofday32.o = -ffeedback-generate
+endif
+
+# Disable gcov profiling for VDSO code
+GCOV_PROFILE := n
+
+# Force dependency
+$(obj)/vdso.o: $(obj)/vdso.so
+
+# link rule for the .so file, .lds has to be first
+SYSCFLAGS_vdso.so.dbg = $(c_flags)
+$(obj)/vdso.so.dbg: $(src)/vdso.lds $(obj-vdso)
+	$(call if_changed,vdsold)
+
+
+# We also create a special relocatable object that should mirror the symbol
+# table and layout of the linked DSO.  With ld -R we can then refer to
+# these symbols in the kernel code rather than hand-coded addresses.
+extra-y += vdso-syms.o
+$(obj)/built-in.o: $(obj)/vdso-syms.o
+$(obj)/built-in.o: ld_flags += -R $(obj)/vdso-syms.o
+
+SYSCFLAGS_vdso.so.dbg = -shared -s -Wl,-soname=linux-vdso.so.1 \
+                            $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
+SYSCFLAGS_vdso_syms.o = -r
+$(obj)/vdso-syms.o: $(src)/vdso.lds $(obj)/vrt_sigreturn.o FORCE
+	$(call if_changed,vdsold)
+
+
+# strip rule for the .so file
+$(obj)/%.so: OBJCOPYFLAGS := -S
+$(obj)/%.so: $(obj)/%.so.dbg FORCE
+	$(call if_changed,objcopy)
+
+# actual build commands
+# The DSO images are built using a special linker script
+# Add -lgcc so tilepro gets static muldi3 and lshrdi3 definitions.
+# Make sure only to export the intended __vdso_xxx symbol offsets.
+quiet_cmd_vdsold = VDSOLD  $@
+      cmd_vdsold = $(CC) $(KCFLAGS) -nostdlib $(SYSCFLAGS_$(@F)) \
+                           -Wl,-T,$(filter-out FORCE,$^) -o $@.tmp -lgcc && \
+                   $(CROSS_COMPILE)objcopy \
+                           $(patsubst %, -G __vdso_%, $(vdso-syms)) $@.tmp $@
+
+# install commands for the unstripped file
+quiet_cmd_vdso_install = INSTALL $@
+      cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@
+
+vdso.so: $(obj)/vdso.so.dbg
+	@mkdir -p $(MODLIB)/vdso
+	$(call cmd,vdso_install)
+
+vdso32.so: $(obj)/vdso32.so.dbg
+	$(call cmd,vdso_install)
+
+vdso_install: vdso.so
+vdso32_install: vdso32.so
+
+
+KBUILD_AFLAGS_32 := $(filter-out -m64,$(KBUILD_AFLAGS))
+KBUILD_AFLAGS_32 += -m32 -s
+KBUILD_CFLAGS_32 := $(filter-out -m64,$(KBUILD_CFLAGS))
+KBUILD_CFLAGS_32 += -m32 -fPIC -shared
+
+obj-vdso32 = $(patsubst %, v%32.o, $(vdso-syms))
+obj-vdso32 := $(addprefix $(obj)/, $(obj-vdso32))
+
+targets += $(obj-vdso32) vdso32.so vdso32.so.dbg
+
+$(obj-vdso32:%=%): KBUILD_AFLAGS = $(KBUILD_AFLAGS_32)
+$(obj-vdso32:%=%): KBUILD_CFLAGS = $(KBUILD_CFLAGS_32)
+
+$(obj)/vgettimeofday32.o: $(obj)/vgettimeofday.c
+	$(call if_changed,cc_o_c)
+
+$(obj)/vrt_sigreturn32.o: $(obj)/vrt_sigreturn.S
+	$(call if_changed,as_o_S)
+
+# Force dependency
+$(obj)/vdso32.o: $(obj)/vdso32.so
+
+SYSCFLAGS_vdso32.so.dbg = -m32 -shared -s -Wl,-soname=linux-vdso32.so.1 \
+			    $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
+$(obj)/vdso32.so.dbg: $(src)/vdso.lds $(obj-vdso32)
+	$(call if_changed,vdsold)
diff --git a/arch/tile/kernel/vdso/vdso.S b/arch/tile/kernel/vdso/vdso.S
new file mode 100644
index 0000000..3467adb
--- /dev/null
+++ b/arch/tile/kernel/vdso/vdso.S
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <asm/page.h>
+
+	__PAGE_ALIGNED_DATA
+
+	.global vdso_start, vdso_end
+	.align PAGE_SIZE
+vdso_start:
+	.incbin "arch/tile/kernel/vdso/vdso.so"
+	.align PAGE_SIZE
+vdso_end:
+
+	.previous
diff --git a/arch/tile/kernel/vdso/vdso.lds.S b/arch/tile/kernel/vdso/vdso.lds.S
new file mode 100644
index 0000000..041cd6c
--- /dev/null
+++ b/arch/tile/kernel/vdso/vdso.lds.S
@@ -0,0 +1,87 @@
+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#define VDSO_VERSION_STRING	LINUX_2.6
+
+
+OUTPUT_ARCH(tile)
+
+/* The ELF entry point can be used to set the AT_SYSINFO value. */
+ENTRY(__vdso_rt_sigreturn);
+
+
+SECTIONS
+{
+	. = SIZEOF_HEADERS;
+
+	.hash		: { *(.hash) }			:text
+	.gnu.hash	: { *(.gnu.hash) }
+	.dynsym		: { *(.dynsym) }
+	.dynstr		: { *(.dynstr) }
+	.gnu.version	: { *(.gnu.version) }
+	.gnu.version_d	: { *(.gnu.version_d) }
+	.gnu.version_r	: { *(.gnu.version_r) }
+
+	.note		: { *(.note.*) }		:text	:note
+	.dynamic	: { *(.dynamic) }		:text	:dynamic
+
+	.eh_frame_hdr	: { *(.eh_frame_hdr) }		:text	:eh_frame_hdr
+	.eh_frame	: { KEEP (*(.eh_frame)) }	:text
+
+	.rodata	 : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
+
+	/*
+	 * This linker script is used both with -r and with -shared.
+	 * For the layouts to match, we need to skip more than enough
+	 * space for the dynamic symbol table et al. If this amount
+	 * is insufficient, ld -shared will barf. Just increase it here.
+	 */
+	. = 0x1000;
+	.text		: { *(.text .text.*) }		:text
+
+	.data		: {
+		*(.got.plt) *(.got)
+		*(.data .data.* .gnu.linkonce.d.*)
+		*(.dynbss)
+		*(.bss .bss.* .gnu.linkonce.b.*)
+	}
+}
+
+
+/*
+ * We must supply the ELF program headers explicitly to get just one
+ * PT_LOAD segment, and set the flags explicitly to make segments read-only.
+ */
+PHDRS
+{
+	text		PT_LOAD		FLAGS(5) FILEHDR PHDRS;	/* PF_R|PF_X */
+	dynamic		PT_DYNAMIC	FLAGS(4);		/* PF_R */
+	note		PT_NOTE		FLAGS(4);		/* PF_R */
+	eh_frame_hdr	PT_GNU_EH_FRAME;
+}
+
+
+/*
+ * This controls what userland symbols we export from the vDSO.
+ */
+VERSION
+{
+	VDSO_VERSION_STRING {
+	global:
+		__vdso_rt_sigreturn;
+		__vdso_gettimeofday;
+		gettimeofday;
+	local:*;
+	};
+}
diff --git a/arch/tile/kernel/vdso/vdso32.S b/arch/tile/kernel/vdso/vdso32.S
new file mode 100644
index 0000000..1d1ac32
--- /dev/null
+++ b/arch/tile/kernel/vdso/vdso32.S
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2013 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <asm/page.h>
+
+	__PAGE_ALIGNED_DATA
+
+	.global vdso32_start, vdso32_end
+	.align PAGE_SIZE
+vdso32_start:
+	.incbin "arch/tile/kernel/vdso/vdso32.so"
+	.align PAGE_SIZE
+vdso32_end:
+
+	.previous
diff --git a/arch/tile/kernel/vdso/vgettimeofday.c b/arch/tile/kernel/vdso/vgettimeofday.c
new file mode 100644
index 0000000..51ec8e4
--- /dev/null
+++ b/arch/tile/kernel/vdso/vgettimeofday.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#define VDSO_BUILD  /* avoid some shift warnings for -m32 in <asm/page.h> */
+#include <linux/time.h>
+#include <asm/timex.h>
+#include <asm/vdso.h>
+
+#if CHIP_HAS_SPLIT_CYCLE()
+static inline cycles_t get_cycles_inline(void)
+{
+	unsigned int high = __insn_mfspr(SPR_CYCLE_HIGH);
+	unsigned int low = __insn_mfspr(SPR_CYCLE_LOW);
+	unsigned int high2 = __insn_mfspr(SPR_CYCLE_HIGH);
+
+	while (unlikely(high != high2)) {
+		low = __insn_mfspr(SPR_CYCLE_LOW);
+		high = high2;
+		high2 = __insn_mfspr(SPR_CYCLE_HIGH);
+	}
+
+	return (((cycles_t)high) << 32) | low;
+}
+#define get_cycles get_cycles_inline
+#endif
+
+/*
+ * Find out the vDSO data page address in the process address space.
+ */
+inline unsigned long get_datapage(void)
+{
+	unsigned long ret;
+
+	/* vdso data page located in the 2nd vDSO page. */
+	asm volatile ("lnk %0" : "=r"(ret));
+	ret &= ~(PAGE_SIZE - 1);
+	ret += PAGE_SIZE;
+
+	return ret;
+}
+
+int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz)
+{
+	cycles_t cycles;
+	unsigned long count, sec, ns;
+	volatile struct vdso_data *vdso_data;
+
+	vdso_data = (struct vdso_data *)get_datapage();
+	/* The use of the timezone is obsolete, normally tz is NULL. */
+	if (unlikely(tz != NULL)) {
+		while (1) {
+			/* Spin until the update finish. */
+			count = vdso_data->tz_update_count;
+			if (count & 1)
+				continue;
+
+			tz->tz_minuteswest = vdso_data->tz_minuteswest;
+			tz->tz_dsttime = vdso_data->tz_dsttime;
+
+			/* Check whether updated, read again if so. */
+			if (count == vdso_data->tz_update_count)
+				break;
+		}
+	}
+
+	if (unlikely(tv == NULL))
+		return 0;
+
+	while (1) {
+		/* Spin until the update finish. */
+		count = vdso_data->tb_update_count;
+		if (count & 1)
+			continue;
+
+		cycles = (get_cycles() - vdso_data->xtime_tod_stamp);
+		ns = (cycles * vdso_data->mult) >> vdso_data->shift;
+		sec = vdso_data->xtime_clock_sec;
+		ns += vdso_data->xtime_clock_nsec;
+		if (ns >= NSEC_PER_SEC) {
+			ns -= NSEC_PER_SEC;
+			sec += 1;
+		}
+
+		/* Check whether updated, read again if so. */
+		if (count == vdso_data->tb_update_count)
+			break;
+	}
+
+	tv->tv_sec = sec;
+	tv->tv_usec = ns / 1000;
+
+	return 0;
+}
+
+int gettimeofday(struct timeval *tv, struct timezone *tz)
+	__attribute__((weak, alias("__vdso_gettimeofday")));
diff --git a/arch/tile/kernel/vdso/vrt_sigreturn.S b/arch/tile/kernel/vdso/vrt_sigreturn.S
new file mode 100644
index 0000000..6326caf
--- /dev/null
+++ b/arch/tile/kernel/vdso/vrt_sigreturn.S
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/linkage.h>
+#include <arch/abi.h>
+#include <asm/unistd.h>
+
+/*
+ * Note that libc has a copy of this function that it uses to compare
+ * against the PC when a stack backtrace ends, so if this code is
+ * changed, the libc implementation(s) should also be updated.
+ */
+ENTRY(__vdso_rt_sigreturn)
+	moveli TREG_SYSCALL_NR_NAME, __NR_rt_sigreturn
+	swint1
+	/* We don't use ENDPROC to avoid tagging this symbol as FUNC,
+	 * which confuses the perf tool.
+	 */
+	END(__vdso_rt_sigreturn)
diff --git a/arch/tile/kernel/vmlinux.lds.S b/arch/tile/kernel/vmlinux.lds.S
index a13ed90..f1819423 100644
--- a/arch/tile/kernel/vmlinux.lds.S
+++ b/arch/tile/kernel/vmlinux.lds.S
@@ -5,7 +5,7 @@
 #include <hv/hypervisor.h>
 
 /* Text loads starting from the supervisor interrupt vector address. */
-#define TEXT_OFFSET MEM_SV_INTRPT
+#define TEXT_OFFSET MEM_SV_START
 
 OUTPUT_ARCH(tile)
 ENTRY(_start)
@@ -13,7 +13,7 @@ jiffies = jiffies_64;
 
 PHDRS
 {
-  intrpt1 PT_LOAD ;
+  intrpt PT_LOAD ;
   text PT_LOAD ;
   data PT_LOAD ;
 }
@@ -24,14 +24,17 @@ SECTIONS
   #define LOAD_OFFSET TEXT_OFFSET
 
   /* Interrupt vectors */
-  .intrpt1 (LOAD_OFFSET) : AT ( 0 )   /* put at the start of physical memory */
+  .intrpt (LOAD_OFFSET) : AT ( 0 )   /* put at the start of physical memory */
   {
     _text = .;
-    *(.intrpt1)
-  } :intrpt1 =0
+    *(.intrpt)
+  } :intrpt =0
 
   /* Hypervisor call vectors */
-  #include "hvglue.lds"
+  . = ALIGN(0x10000);
+  .hvglue : AT (ADDR(.hvglue) - LOAD_OFFSET) {
+    *(.hvglue)
+  } :NONE
 
   /* Now the real code */
   . = ALIGN(0x20000);
@@ -40,7 +43,11 @@ SECTIONS
     HEAD_TEXT
     SCHED_TEXT
     LOCK_TEXT
+    KPROBES_TEXT
+    IRQENTRY_TEXT
     __fix_text_end = .;   /* tile-cpack won't rearrange before this */
+    ALIGN_FUNCTION();
+    *(.hottext*)
     TEXT_TEXT
     *(.text.*)
     *(.coldtext*)
@@ -67,20 +74,8 @@ SECTIONS
   __init_end = .;
 
   _sdata = .;                   /* Start of data section */
-
   RO_DATA_SECTION(PAGE_SIZE)
-
-  /* initially writeable, then read-only */
-  . = ALIGN(PAGE_SIZE);
-  __w1data_begin = .;
-  .w1data : AT(ADDR(.w1data) - LOAD_OFFSET) {
-    VMLINUX_SYMBOL(__w1data_begin) = .;
-    *(.w1data)
-    VMLINUX_SYMBOL(__w1data_end) = .;
-  }
-
   RW_DATA_SECTION(L2_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
-
   _edata = .;
 
   EXCEPTION_TABLE(L2_CACHE_BYTES)
diff --git a/arch/tile/lib/Makefile b/arch/tile/lib/Makefile
index 985f598..c4211cb 100644
--- a/arch/tile/lib/Makefile
+++ b/arch/tile/lib/Makefile
@@ -4,15 +4,15 @@
 
 lib-y = cacheflush.o checksum.o cpumask.o delay.o uaccess.o \
 	memmove.o memcpy_$(BITS).o memchr_$(BITS).o memset_$(BITS).o \
-	strchr_$(BITS).o strlen_$(BITS).o
-
-ifeq ($(CONFIG_TILEGX),y)
-CFLAGS_REMOVE_memcpy_user_64.o = -fno-omit-frame-pointer
-lib-y += memcpy_user_64.o
-else
-lib-y += atomic_32.o atomic_asm_32.o memcpy_tile64.o
-endif
+	strchr_$(BITS).o strlen_$(BITS).o strnlen_$(BITS).o
 
+lib-$(CONFIG_TILEGX) += memcpy_user_64.o
+lib-$(CONFIG_TILEPRO) += atomic_32.o atomic_asm_32.o
 lib-$(CONFIG_SMP) += spinlock_$(BITS).o usercopy_$(BITS).o
 
 obj-$(CONFIG_MODULES) += exports.o
+
+# The finv_buffer_remote() and copy_{to,from}_user() routines can't
+# have -pg added, since they both rely on being leaf functions.
+CFLAGS_REMOVE_cacheflush.o = -pg
+CFLAGS_REMOVE_memcpy_user_64.o = -pg
diff --git a/arch/tile/lib/atomic_32.c b/arch/tile/lib/atomic_32.c
index f5cada7..c89b211 100644
--- a/arch/tile/lib/atomic_32.c
+++ b/arch/tile/lib/atomic_32.c
@@ -20,50 +20,12 @@
 #include <linux/atomic.h>
 #include <arch/chip.h>
 
-/* See <asm/atomic_32.h> */
-#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
-
-/*
- * A block of memory containing locks for atomic ops. Each instance of this
- * struct will be homed on a different CPU.
- */
-struct atomic_locks_on_cpu {
-	int lock[ATOMIC_HASH_L2_SIZE];
-} __attribute__((aligned(ATOMIC_HASH_L2_SIZE * 4)));
-
-static DEFINE_PER_CPU(struct atomic_locks_on_cpu, atomic_lock_pool);
-
-/* The locks we'll use until __init_atomic_per_cpu is called. */
-static struct atomic_locks_on_cpu __initdata initial_atomic_locks;
-
-/* Hash into this vector to get a pointer to lock for the given atomic. */
-struct atomic_locks_on_cpu *atomic_lock_ptr[ATOMIC_HASH_L1_SIZE]
-	__write_once = {
-	[0 ... ATOMIC_HASH_L1_SIZE-1] (&initial_atomic_locks)
-};
-
-#else /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
-
 /* This page is remapped on startup to be hash-for-home. */
 int atomic_locks[PAGE_SIZE / sizeof(int)] __page_aligned_bss;
 
-#endif /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
-
 int *__atomic_hashed_lock(volatile void *v)
 {
 	/* NOTE: this code must match "sys_cmpxchg" in kernel/intvec_32.S */
-#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
-	unsigned long i =
-		(unsigned long) v & ((PAGE_SIZE-1) & -sizeof(long long));
-	unsigned long n = __insn_crc32_32(0, i);
-
-	/* Grab high bits for L1 index. */
-	unsigned long l1_index = n >> ((sizeof(n) * 8) - ATOMIC_HASH_L1_SHIFT);
-	/* Grab low bits for L2 index. */
-	unsigned long l2_index = n & (ATOMIC_HASH_L2_SIZE - 1);
-
-	return &atomic_lock_ptr[l1_index]->lock[l2_index];
-#else
 	/*
 	 * Use bits [3, 3 + ATOMIC_HASH_SHIFT) as the lock index.
 	 * Using mm works here because atomic_locks is page aligned.
@@ -72,26 +34,13 @@ int *__atomic_hashed_lock(volatile void *v)
 				      (unsigned long)atomic_locks,
 				      2, (ATOMIC_HASH_SHIFT + 2) - 1);
 	return (int *)ptr;
-#endif
 }
 
 #ifdef CONFIG_SMP
 /* Return whether the passed pointer is a valid atomic lock pointer. */
 static int is_atomic_lock(int *p)
 {
-#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
-	int i;
-	for (i = 0; i < ATOMIC_HASH_L1_SIZE; ++i) {
-
-		if (p >= &atomic_lock_ptr[i]->lock[0] &&
-		    p < &atomic_lock_ptr[i]->lock[ATOMIC_HASH_L2_SIZE]) {
-			return 1;
-		}
-	}
-	return 0;
-#else
 	return p >= &atomic_locks[0] && p < &atomic_locks[ATOMIC_HASH_SIZE];
-#endif
 }
 
 void __atomic_fault_unlock(int *irqlock_word)
@@ -110,33 +59,32 @@ static inline int *__atomic_setup(volatile void *v)
 	return __atomic_hashed_lock(v);
 }
 
-int _atomic_xchg(atomic_t *v, int n)
+int _atomic_xchg(int *v, int n)
 {
-	return __atomic_xchg(&v->counter, __atomic_setup(v), n).val;
+	return __atomic_xchg(v, __atomic_setup(v), n).val;
 }
 EXPORT_SYMBOL(_atomic_xchg);
 
-int _atomic_xchg_add(atomic_t *v, int i)
+int _atomic_xchg_add(int *v, int i)
 {
-	return __atomic_xchg_add(&v->counter, __atomic_setup(v), i).val;
+	return __atomic_xchg_add(v, __atomic_setup(v), i).val;
 }
 EXPORT_SYMBOL(_atomic_xchg_add);
 
-int _atomic_xchg_add_unless(atomic_t *v, int a, int u)
+int _atomic_xchg_add_unless(int *v, int a, int u)
 {
 	/*
 	 * Note: argument order is switched here since it is easier
 	 * to use the first argument consistently as the "old value"
 	 * in the assembly, as is done for _atomic_cmpxchg().
 	 */
-	return __atomic_xchg_add_unless(&v->counter, __atomic_setup(v), u, a)
-		.val;
+	return __atomic_xchg_add_unless(v, __atomic_setup(v), u, a).val;
 }
 EXPORT_SYMBOL(_atomic_xchg_add_unless);
 
-int _atomic_cmpxchg(atomic_t *v, int o, int n)
+int _atomic_cmpxchg(int *v, int o, int n)
 {
-	return __atomic_cmpxchg(&v->counter, __atomic_setup(v), o, n).val;
+	return __atomic_cmpxchg(v, __atomic_setup(v), o, n).val;
 }
 EXPORT_SYMBOL(_atomic_cmpxchg);
 
@@ -159,33 +107,32 @@ unsigned long _atomic_xor(volatile unsigned long *p, unsigned long mask)
 EXPORT_SYMBOL(_atomic_xor);
 
 
-u64 _atomic64_xchg(atomic64_t *v, u64 n)
+long long _atomic64_xchg(long long *v, long long n)
 {
-	return __atomic64_xchg(&v->counter, __atomic_setup(v), n);
+	return __atomic64_xchg(v, __atomic_setup(v), n);
 }
 EXPORT_SYMBOL(_atomic64_xchg);
 
-u64 _atomic64_xchg_add(atomic64_t *v, u64 i)
+long long _atomic64_xchg_add(long long *v, long long i)
 {
-	return __atomic64_xchg_add(&v->counter, __atomic_setup(v), i);
+	return __atomic64_xchg_add(v, __atomic_setup(v), i);
 }
 EXPORT_SYMBOL(_atomic64_xchg_add);
 
-u64 _atomic64_xchg_add_unless(atomic64_t *v, u64 a, u64 u)
+long long _atomic64_xchg_add_unless(long long *v, long long a, long long u)
 {
 	/*
 	 * Note: argument order is switched here since it is easier
 	 * to use the first argument consistently as the "old value"
 	 * in the assembly, as is done for _atomic_cmpxchg().
 	 */
-	return __atomic64_xchg_add_unless(&v->counter, __atomic_setup(v),
-					  u, a);
+	return __atomic64_xchg_add_unless(v, __atomic_setup(v), u, a);
 }
 EXPORT_SYMBOL(_atomic64_xchg_add_unless);
 
-u64 _atomic64_cmpxchg(atomic64_t *v, u64 o, u64 n)
+long long _atomic64_cmpxchg(long long *v, long long o, long long n)
 {
-	return __atomic64_cmpxchg(&v->counter, __atomic_setup(v), o, n);
+	return __atomic64_cmpxchg(v, __atomic_setup(v), o, n);
 }
 EXPORT_SYMBOL(_atomic64_cmpxchg);
 
@@ -208,54 +155,8 @@ struct __get_user __atomic_bad_address(int __user *addr)
 }
 
 
-#if CHIP_HAS_CBOX_HOME_MAP()
-static int __init noatomichash(char *str)
-{
-	pr_warning("noatomichash is deprecated.\n");
-	return 1;
-}
-__setup("noatomichash", noatomichash);
-#endif
-
 void __init __init_atomic_per_cpu(void)
 {
-#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
-
-	unsigned int i;
-	int actual_cpu;
-
-	/*
-	 * Before this is called from setup, we just have one lock for
-	 * all atomic objects/operations.  Here we replace the
-	 * elements of atomic_lock_ptr so that they point at per_cpu
-	 * integers.  This seemingly over-complex approach stems from
-	 * the fact that DEFINE_PER_CPU defines an entry for each cpu
-	 * in the grid, not each cpu from 0..ATOMIC_HASH_SIZE-1.  But
-	 * for efficient hashing of atomics to their locks we want a
-	 * compile time constant power of 2 for the size of this
-	 * table, so we use ATOMIC_HASH_SIZE.
-	 *
-	 * Here we populate atomic_lock_ptr from the per cpu
-	 * atomic_lock_pool, interspersing by actual cpu so that
-	 * subsequent elements are homed on consecutive cpus.
-	 */
-
-	actual_cpu = cpumask_first(cpu_possible_mask);
-
-	for (i = 0; i < ATOMIC_HASH_L1_SIZE; ++i) {
-		/*
-		 * Preincrement to slightly bias against using cpu 0,
-		 * which has plenty of stuff homed on it already.
-		 */
-		actual_cpu = cpumask_next(actual_cpu, cpu_possible_mask);
-		if (actual_cpu >= nr_cpu_ids)
-			actual_cpu = cpumask_first(cpu_possible_mask);
-
-		atomic_lock_ptr[i] = &per_cpu(atomic_lock_pool, actual_cpu);
-	}
-
-#else /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
-
 	/* Validate power-of-two and "bigger than cpus" assumption */
 	BUILD_BUG_ON(ATOMIC_HASH_SIZE & (ATOMIC_HASH_SIZE-1));
 	BUG_ON(ATOMIC_HASH_SIZE < nr_cpu_ids);
@@ -279,6 +180,4 @@ void __init __init_atomic_per_cpu(void)
 	 * That should not produce more indices than ATOMIC_HASH_SIZE.
 	 */
 	BUILD_BUG_ON((PAGE_SIZE >> 3) > ATOMIC_HASH_SIZE);
-
-#endif /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
 }
diff --git a/arch/tile/lib/atomic_asm_32.S b/arch/tile/lib/atomic_asm_32.S
index 3063804..6bda313 100644
--- a/arch/tile/lib/atomic_asm_32.S
+++ b/arch/tile/lib/atomic_asm_32.S
@@ -164,6 +164,7 @@ STD_ENTRY_SECTION(__atomic\name, .text.atomic)
 	STD_ENDPROC(__atomic\name)
 	.ifc \bitwidth,32
 	.pushsection __ex_table,"a"
+	.align  4
 	.word   1b, __atomic\name
 	.word   2b, __atomic\name
 	.word   __atomic\name, __atomic_bad_address
diff --git a/arch/tile/lib/cacheflush.c b/arch/tile/lib/cacheflush.c
index 8f8ad81..9c0ec22 100644
--- a/arch/tile/lib/cacheflush.c
+++ b/arch/tile/lib/cacheflush.c
@@ -36,7 +36,8 @@ static inline void force_load(char *p)
  * core (if "!hfh") or homed via hash-for-home (if "hfh"), waiting
  * until the memory controller holds the flushed values.
  */
-void finv_buffer_remote(void *buffer, size_t size, int hfh)
+void __attribute__((optimize("omit-frame-pointer")))
+finv_buffer_remote(void *buffer, size_t size, int hfh)
 {
 	char *p, *base;
 	size_t step_size, load_count;
@@ -147,18 +148,21 @@ void finv_buffer_remote(void *buffer, size_t size, int hfh)
 		force_load(p);
 
 	/*
-	 * Repeat, but with inv's instead of loads, to get rid of the
+	 * Repeat, but with finv's instead of loads, to get rid of the
 	 * data we just loaded into our own cache and the old home L3.
-	 * No need to unroll since inv's don't target a register.
+	 * No need to unroll since finv's don't target a register.
+	 * The finv's are guaranteed not to actually flush the data in
+	 * the buffer back to their home, since we just read it, so the
+	 * lines are clean in cache; we will only invalidate those lines.
 	 */
 	p = (char *)buffer + size - 1;
-	__insn_inv(p);
+	__insn_finv(p);
 	p -= step_size;
 	p = (char *)((unsigned long)p | (step_size - 1));
 	for (; p >= base; p -= step_size)
-		__insn_inv(p);
+		__insn_finv(p);
 
-	/* Wait for the load+inv's (and thus finvs) to have completed. */
+	/* Wait for these finv's (and thus the first finvs) to be done. */
 	__insn_mf();
 
 #ifdef __tilegx__
diff --git a/arch/tile/lib/exports.c b/arch/tile/lib/exports.c
index a93b02a..82733c8 100644
--- a/arch/tile/lib/exports.c
+++ b/arch/tile/lib/exports.c
@@ -22,7 +22,6 @@ EXPORT_SYMBOL(strnlen_user_asm);
 EXPORT_SYMBOL(strncpy_from_user_asm);
 EXPORT_SYMBOL(clear_user_asm);
 EXPORT_SYMBOL(flush_user_asm);
-EXPORT_SYMBOL(inv_user_asm);
 EXPORT_SYMBOL(finv_user_asm);
 
 /* arch/tile/kernel/entry.S */
@@ -34,6 +33,12 @@ EXPORT_SYMBOL(dump_stack);
 /* arch/tile/kernel/head.S */
 EXPORT_SYMBOL(empty_zero_page);
 
+#ifdef CONFIG_FUNCTION_TRACER
+/* arch/tile/kernel/mcount_64.S */
+#include <asm/ftrace.h>
+EXPORT_SYMBOL(__mcount);
+#endif /* CONFIG_FUNCTION_TRACER */
+
 /* arch/tile/lib/, various memcpy files */
 EXPORT_SYMBOL(memcpy);
 EXPORT_SYMBOL(__copy_to_user_inatomic);
diff --git a/arch/tile/lib/memchr_64.c b/arch/tile/lib/memchr_64.c
index 6f867db..f8196b3 100644
--- a/arch/tile/lib/memchr_64.c
+++ b/arch/tile/lib/memchr_64.c
@@ -36,7 +36,7 @@ void *memchr(const void *s, int c, size_t n)
 	p = (const uint64_t *)(s_int & -8);
 
 	/* Create eight copies of the byte for which we are looking. */
-	goal = 0x0101010101010101ULL * (uint8_t) c;
+	goal = copy_byte(c);
 
 	/* Read the first word, but munge it so that bytes before the array
 	 * will not match goal.
diff --git a/arch/tile/lib/memcpy_32.S b/arch/tile/lib/memcpy_32.S
index 2a419a6..a2771ae 100644
--- a/arch/tile/lib/memcpy_32.S
+++ b/arch/tile/lib/memcpy_32.S
@@ -22,14 +22,6 @@
 
 #include <linux/linkage.h>
 
-/* On TILE64, we wrap these functions via arch/tile/lib/memcpy_tile64.c */
-#if !CHIP_HAS_COHERENT_LOCAL_CACHE()
-#define memcpy __memcpy_asm
-#define __copy_to_user_inatomic __copy_to_user_inatomic_asm
-#define __copy_from_user_inatomic __copy_from_user_inatomic_asm
-#define __copy_from_user_zeroing __copy_from_user_zeroing_asm
-#endif
-
 #define IS_MEMCPY	  0
 #define IS_COPY_FROM_USER  1
 #define IS_COPY_FROM_USER_ZEROING  2
@@ -44,6 +36,7 @@
  */
 #define EX \
 	.pushsection __ex_table, "a"; \
+	.align 4; \
 	.word 9f, memcpy_common_fixup; \
 	.popsection; \
 	9
@@ -158,12 +151,9 @@ EX:	{ sw r0, r3; addi r0, r0, 4; addi r2, r2, -4 }
 
 	{ addi r3, r1, 60; andi r9, r9, -64 }
 
-#if CHIP_HAS_WH64()
 	/* No need to prefetch dst, we'll just do the wh64
 	 * right before we copy a line.
 	 */
-#endif
-
 EX:	{ lw r5, r3; addi r3, r3, 64; movei r4, 1 }
 	/* Intentionally stall for a few cycles to leave L2 cache alone. */
 	{ bnzt zero, .; move r27, lr }
@@ -171,21 +161,6 @@ EX:	{ lw r6, r3; addi r3, r3, 64 }
 	/* Intentionally stall for a few cycles to leave L2 cache alone. */
 	{ bnzt zero, . }
 EX:	{ lw r7, r3; addi r3, r3, 64 }
-#if !CHIP_HAS_WH64()
-	/* Prefetch the dest */
-	/* Intentionally stall for a few cycles to leave L2 cache alone. */
-	{ bnzt zero, . }
-	/* Use a real load to cause a TLB miss if necessary.  We aren't using
-	 * r28, so this should be fine.
-	 */
-EX:	{ lw r28, r9; addi r9, r9, 64 }
-	/* Intentionally stall for a few cycles to leave L2 cache alone. */
-	{ bnzt zero, . }
-	{ prefetch r9; addi r9, r9, 64 }
-	/* Intentionally stall for a few cycles to leave L2 cache alone. */
-	{ bnzt zero, . }
-	{ prefetch r9; addi r9, r9, 64 }
-#endif
 	/* Intentionally stall for a few cycles to leave L2 cache alone. */
 	{ bz zero, .Lbig_loop2 }
 
@@ -286,13 +261,8 @@ EX:	{ lw r7, r3; addi r3, r3, 64 }
 	/* Fill second L1D line. */
 EX:	{ lw r17, r17; addi r1, r1, 48; mvz r3, r13, r1 } /* r17 = WORD_4 */
 
-#if CHIP_HAS_WH64()
 	/* Prepare destination line for writing. */
 EX:	{ wh64 r9; addi r9, r9, 64 }
-#else
-	/* Prefetch dest line */
-	{ prefetch r9; addi r9, r9, 64 }
-#endif
 	/* Load seven words that are L1D hits to cover wh64 L2 usage. */
 
 	/* Load the three remaining words from the last L1D line, which
@@ -330,16 +300,7 @@ EX:	{ lw r18, r1; addi r1, r1, 4 }                  /* r18 = WORD_8 */
 EX:	{ sw r0, r16; addi r0, r0, 4; add r16, r0, r2 } /* store(WORD_0) */
 EX:	{ sw r0, r13; addi r0, r0, 4; andi r16, r16, -64 } /* store(WORD_1) */
 EX:	{ sw r0, r14; addi r0, r0, 4; slt_u r16, r9, r16 } /* store(WORD_2) */
-#if CHIP_HAS_WH64()
 EX:	{ sw r0, r15; addi r0, r0, 4; addi r13, sp, -64 } /* store(WORD_3) */
-#else
-	/* Back up the r9 to a cache line we are already storing to
-	 * if it gets past the end of the dest vector.  Strictly speaking,
-	 * we don't need to back up to the start of a cache line, but it's free
-	 * and tidy, so why not?
-	 */
-EX:	{ sw r0, r15; addi r0, r0, 4; andi r13, r0, -64 } /* store(WORD_3) */
-#endif
 	/* Store second L1D line. */
 EX:	{ sw r0, r17; addi r0, r0, 4; mvz r9, r16, r13 }/* store(WORD_4) */
 EX:	{ sw r0, r19; addi r0, r0, 4 }                  /* store(WORD_5) */
@@ -403,7 +364,6 @@ EX:	{ sb r0, r3;   addi r0, r0, 1; addi r2, r2, -1 }
 
 .Ldest_is_word_aligned:
 
-#if CHIP_HAS_DWORD_ALIGN()
 EX:	{ andi r8, r0, 63; lwadd_na r6, r1, 4}
 	{ slti_u r9, r2, 64; bz r8, .Ldest_is_L2_line_aligned }
 
@@ -511,26 +471,6 @@ EX:	{ swadd r0, r13, 4; addi r2, r2, -32 }
 	/* Move r1 back to the point where it corresponds to r0. */
 	{ addi r1, r1, -4 }
 
-#else /* !CHIP_HAS_DWORD_ALIGN() */
-
-	/* Compute right/left shift counts and load initial source words. */
-	{ andi r5, r1, -4; andi r3, r1, 3 }
-EX:	{ lw r6, r5; addi r5, r5, 4; shli r3, r3, 3 }
-EX:	{ lw r7, r5; addi r5, r5, 4; sub r4, zero, r3 }
-
-	/* Load and store one word at a time, using shifts and ORs
-	 * to correct for the misaligned src.
-	 */
-.Lcopy_unaligned_src_loop:
-	{ shr r6, r6, r3; shl r8, r7, r4 }
-EX:	{ lw r7, r5; or r8, r8, r6; move r6, r7 }
-EX:	{ sw r0, r8; addi r0, r0, 4; addi r2, r2, -4 }
-	{ addi r5, r5, 4; slti_u r8, r2, 8 }
-	{ bzt r8, .Lcopy_unaligned_src_loop; addi r1, r1, 4 }
-
-	{ bz r2, .Lcopy_unaligned_done }
-#endif /* !CHIP_HAS_DWORD_ALIGN() */
-
 	/* Fall through */
 
 /*
@@ -614,5 +554,6 @@ memcpy_fixup_loop:
 	.size memcpy_common_fixup, . - memcpy_common_fixup
 
 	.section __ex_table,"a"
+	.align 4
 	.word .Lcfu, .Lcopy_from_user_fixup_zero_remainder
 	.word .Lctu, .Lcopy_to_user_fixup_done
diff --git a/arch/tile/lib/memcpy_64.c b/arch/tile/lib/memcpy_64.c
index c79b8e7..4815354 100644
--- a/arch/tile/lib/memcpy_64.c
+++ b/arch/tile/lib/memcpy_64.c
@@ -18,14 +18,17 @@
 /* EXPORT_SYMBOL() is in arch/tile/lib/exports.c since this should be asm. */
 
 /* Must be 8 bytes in size. */
-#define word_t uint64_t
+#define op_t uint64_t
 
-#if CHIP_L2_LINE_SIZE() != 64 && CHIP_L2_LINE_SIZE() != 128
-#error "Assumes 64 or 128 byte line size"
+/* Threshold value for when to enter the unrolled loops. */
+#define	OP_T_THRES	16
+
+#if CHIP_L2_LINE_SIZE() != 64
+#error "Assumes 64 byte line size"
 #endif
 
 /* How many cache lines ahead should we prefetch? */
-#define PREFETCH_LINES_AHEAD 3
+#define PREFETCH_LINES_AHEAD 4
 
 /*
  * Provide "base versions" of load and store for the normal code path.
@@ -51,15 +54,16 @@ void *memcpy(void *__restrict dstv, const void *__restrict srcv, size_t n)
  * macros to return a count of uncopied bytes due to mm fault.
  */
 #define RETVAL 0
-int USERCOPY_FUNC(void *__restrict dstv, const void *__restrict srcv, size_t n)
+int __attribute__((optimize("omit-frame-pointer")))
+USERCOPY_FUNC(void *__restrict dstv, const void *__restrict srcv, size_t n)
 #endif
 {
 	char *__restrict dst1 = (char *)dstv;
 	const char *__restrict src1 = (const char *)srcv;
 	const char *__restrict src1_end;
 	const char *__restrict prefetch;
-	word_t *__restrict dst8;    /* 8-byte pointer to destination memory. */
-	word_t final; /* Final bytes to write to trailing word, if any */
+	op_t *__restrict dst8;    /* 8-byte pointer to destination memory. */
+	op_t final; /* Final bytes to write to trailing word, if any */
 	long i;
 
 	if (n < 16) {
@@ -79,104 +83,228 @@ int USERCOPY_FUNC(void *__restrict dstv, const void *__restrict srcv, size_t n)
 	for (i = 0; i < PREFETCH_LINES_AHEAD; i++) {
 		__insn_prefetch(prefetch);
 		prefetch += CHIP_L2_LINE_SIZE();
-		prefetch = (prefetch > src1_end) ? prefetch : src1;
+		prefetch = (prefetch < src1_end) ? prefetch : src1;
 	}
 
 	/* Copy bytes until dst is word-aligned. */
-	for (; (uintptr_t)dst1 & (sizeof(word_t) - 1); n--)
+	for (; (uintptr_t)dst1 & (sizeof(op_t) - 1); n--)
 		ST1(dst1++, LD1(src1++));
 
 	/* 8-byte pointer to destination memory. */
-	dst8 = (word_t *)dst1;
-
-	if (__builtin_expect((uintptr_t)src1 & (sizeof(word_t) - 1), 0)) {
-		/*
-		 * Misaligned copy.  Copy 8 bytes at a time, but don't
-		 * bother with other fanciness.
-		 *
-		 * TODO: Consider prefetching and using wh64 as well.
-		 */
-
-		/* Create an aligned src8. */
-		const word_t *__restrict src8 =
-			(const word_t *)((uintptr_t)src1 & -sizeof(word_t));
-		word_t b;
-
-		word_t a = LD8(src8++);
-		for (; n >= sizeof(word_t); n -= sizeof(word_t)) {
-			b = LD8(src8++);
-			a = __insn_dblalign(a, b, src1);
-			ST8(dst8++, a);
-			a = b;
+	dst8 = (op_t *)dst1;
+
+	if (__builtin_expect((uintptr_t)src1 & (sizeof(op_t) - 1), 0)) {
+		/* Unaligned copy. */
+
+		op_t  tmp0 = 0, tmp1 = 0, tmp2, tmp3;
+		const op_t *src8 = (const op_t *) ((uintptr_t)src1 &
+						   -sizeof(op_t));
+		const void *srci = (void *)src1;
+		int m;
+
+		m = (CHIP_L2_LINE_SIZE() << 2) -
+			(((uintptr_t)dst8) & ((CHIP_L2_LINE_SIZE() << 2) - 1));
+		m = (n < m) ? n : m;
+		m /= sizeof(op_t);
+
+		/* Copy until 'dst' is cache-line-aligned. */
+		n -= (sizeof(op_t) * m);
+
+		switch (m % 4) {
+		case 0:
+			if (__builtin_expect(!m, 0))
+				goto _M0;
+			tmp1 = LD8(src8++);
+			tmp2 = LD8(src8++);
+			goto _8B3;
+		case 2:
+			m += 2;
+			tmp3 = LD8(src8++);
+			tmp0 = LD8(src8++);
+			goto _8B1;
+		case 3:
+			m += 1;
+			tmp2 = LD8(src8++);
+			tmp3 = LD8(src8++);
+			goto _8B2;
+		case 1:
+			m--;
+			tmp0 = LD8(src8++);
+			tmp1 = LD8(src8++);
+			if (__builtin_expect(!m, 0))
+				goto _8B0;
+		}
+
+		do {
+			tmp2 = LD8(src8++);
+			tmp0 =  __insn_dblalign(tmp0, tmp1, srci);
+			ST8(dst8++, tmp0);
+_8B3:
+			tmp3 = LD8(src8++);
+			tmp1 = __insn_dblalign(tmp1, tmp2, srci);
+			ST8(dst8++, tmp1);
+_8B2:
+			tmp0 = LD8(src8++);
+			tmp2 = __insn_dblalign(tmp2, tmp3, srci);
+			ST8(dst8++, tmp2);
+_8B1:
+			tmp1 = LD8(src8++);
+			tmp3 = __insn_dblalign(tmp3, tmp0, srci);
+			ST8(dst8++, tmp3);
+			m -= 4;
+		} while (m);
+
+_8B0:
+		tmp0 = __insn_dblalign(tmp0, tmp1, srci);
+		ST8(dst8++, tmp0);
+		src8--;
+
+_M0:
+		if (__builtin_expect(n >= CHIP_L2_LINE_SIZE(), 0)) {
+			op_t tmp4, tmp5, tmp6, tmp7, tmp8;
+
+			prefetch = ((const char *)src8) +
+				CHIP_L2_LINE_SIZE() * PREFETCH_LINES_AHEAD;
+
+			for (tmp0 = LD8(src8++); n >= CHIP_L2_LINE_SIZE();
+			     n -= CHIP_L2_LINE_SIZE()) {
+				/* Prefetch and advance to next line to
+				   prefetch, but don't go past the end.  */
+				__insn_prefetch(prefetch);
+
+				/* Make sure prefetch got scheduled
+				   earlier.  */
+				__asm__ ("" : : : "memory");
+
+				prefetch += CHIP_L2_LINE_SIZE();
+				prefetch = (prefetch < src1_end) ? prefetch :
+					(const char *) src8;
+
+				tmp1 = LD8(src8++);
+				tmp2 = LD8(src8++);
+				tmp3 = LD8(src8++);
+				tmp4 = LD8(src8++);
+				tmp5 = LD8(src8++);
+				tmp6 = LD8(src8++);
+				tmp7 = LD8(src8++);
+				tmp8 = LD8(src8++);
+
+				tmp0 = __insn_dblalign(tmp0, tmp1, srci);
+				tmp1 = __insn_dblalign(tmp1, tmp2, srci);
+				tmp2 = __insn_dblalign(tmp2, tmp3, srci);
+				tmp3 = __insn_dblalign(tmp3, tmp4, srci);
+				tmp4 = __insn_dblalign(tmp4, tmp5, srci);
+				tmp5 = __insn_dblalign(tmp5, tmp6, srci);
+				tmp6 = __insn_dblalign(tmp6, tmp7, srci);
+				tmp7 = __insn_dblalign(tmp7, tmp8, srci);
+
+				__insn_wh64(dst8);
+
+				ST8(dst8++, tmp0);
+				ST8(dst8++, tmp1);
+				ST8(dst8++, tmp2);
+				ST8(dst8++, tmp3);
+				ST8(dst8++, tmp4);
+				ST8(dst8++, tmp5);
+				ST8(dst8++, tmp6);
+				ST8(dst8++, tmp7);
+
+				tmp0 = tmp8;
+			}
+			src8--;
+		}
+
+		/* Copy the rest 8-byte chunks. */
+		if (n >= sizeof(op_t)) {
+			tmp0 = LD8(src8++);
+			for (; n >= sizeof(op_t); n -= sizeof(op_t)) {
+				tmp1 = LD8(src8++);
+				tmp0 = __insn_dblalign(tmp0, tmp1, srci);
+				ST8(dst8++, tmp0);
+				tmp0 = tmp1;
+			}
+			src8--;
 		}
 
 		if (n == 0)
 			return RETVAL;
 
-		b = ((const char *)src8 <= src1_end) ? *src8 : 0;
+		tmp0 = LD8(src8++);
+		tmp1 = ((const char *)src8 <= src1_end)
+			? LD8((op_t *)src8) : 0;
+		final = __insn_dblalign(tmp0, tmp1, srci);
 
-		/*
-		 * Final source bytes to write to trailing partial
-		 * word, if any.
-		 */
-		final = __insn_dblalign(a, b, src1);
 	} else {
 		/* Aligned copy. */
 
-		const word_t* __restrict src8 = (const word_t *)src1;
+		const op_t *__restrict src8 = (const op_t *)src1;
 
 		/* src8 and dst8 are both word-aligned. */
 		if (n >= CHIP_L2_LINE_SIZE()) {
 			/* Copy until 'dst' is cache-line-aligned. */
 			for (; (uintptr_t)dst8 & (CHIP_L2_LINE_SIZE() - 1);
-			     n -= sizeof(word_t))
+			     n -= sizeof(op_t))
 				ST8(dst8++, LD8(src8++));
 
 			for (; n >= CHIP_L2_LINE_SIZE(); ) {
-				__insn_wh64(dst8);
+				op_t tmp0, tmp1, tmp2, tmp3;
+				op_t tmp4, tmp5, tmp6, tmp7;
 
 				/*
 				 * Prefetch and advance to next line
-				 * to prefetch, but don't go past the end
+				 * to prefetch, but don't go past the
+				 * end.
 				 */
 				__insn_prefetch(prefetch);
+
+				/* Make sure prefetch got scheduled
+				   earlier.  */
+				__asm__ ("" : : : "memory");
+
 				prefetch += CHIP_L2_LINE_SIZE();
-				prefetch = (prefetch > src1_end) ? prefetch :
+				prefetch = (prefetch < src1_end) ? prefetch :
 					(const char *)src8;
 
 				/*
-				 * Copy an entire cache line.  Manually
-				 * unrolled to avoid idiosyncracies of
-				 * compiler unrolling.
+				 * Do all the loads before wh64.  This
+				 * is necessary if [src8, src8+7] and
+				 * [dst8, dst8+7] share the same cache
+				 * line and dst8 <= src8, as can be
+				 * the case when called from memmove,
+				 * or with code tested on x86 whose
+				 * memcpy always works with forward
+				 * copies.
 				 */
-#define COPY_WORD(offset) ({ ST8(dst8+offset, LD8(src8+offset)); n -= 8; })
-				COPY_WORD(0);
-				COPY_WORD(1);
-				COPY_WORD(2);
-				COPY_WORD(3);
-				COPY_WORD(4);
-				COPY_WORD(5);
-				COPY_WORD(6);
-				COPY_WORD(7);
-#if CHIP_L2_LINE_SIZE() == 128
-				COPY_WORD(8);
-				COPY_WORD(9);
-				COPY_WORD(10);
-				COPY_WORD(11);
-				COPY_WORD(12);
-				COPY_WORD(13);
-				COPY_WORD(14);
-				COPY_WORD(15);
-#elif CHIP_L2_LINE_SIZE() != 64
-# error Fix code that assumes particular L2 cache line sizes
-#endif
+				tmp0 = LD8(src8++);
+				tmp1 = LD8(src8++);
+				tmp2 = LD8(src8++);
+				tmp3 = LD8(src8++);
+				tmp4 = LD8(src8++);
+				tmp5 = LD8(src8++);
+				tmp6 = LD8(src8++);
+				tmp7 = LD8(src8++);
+
+				/* wh64 and wait for tmp7 load completion. */
+				__asm__ ("move %0, %0; wh64 %1\n"
+					 : : "r"(tmp7), "r"(dst8));
 
-				dst8 += CHIP_L2_LINE_SIZE() / sizeof(word_t);
-				src8 += CHIP_L2_LINE_SIZE() / sizeof(word_t);
+				ST8(dst8++, tmp0);
+				ST8(dst8++, tmp1);
+				ST8(dst8++, tmp2);
+				ST8(dst8++, tmp3);
+				ST8(dst8++, tmp4);
+				ST8(dst8++, tmp5);
+				ST8(dst8++, tmp6);
+				ST8(dst8++, tmp7);
+
+				n -= CHIP_L2_LINE_SIZE();
 			}
+#if CHIP_L2_LINE_SIZE() != 64
+# error "Fix code that assumes particular L2 cache line size."
+#endif
 		}
 
-		for (; n >= sizeof(word_t); n -= sizeof(word_t))
+		for (; n >= sizeof(op_t); n -= sizeof(op_t))
 			ST8(dst8++, LD8(src8++));
 
 		if (__builtin_expect(n == 0, 1))
diff --git a/arch/tile/lib/memcpy_tile64.c b/arch/tile/lib/memcpy_tile64.c
deleted file mode 100644
index 3bc4b4e..0000000
--- a/arch/tile/lib/memcpy_tile64.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- * Copyright 2010 Tilera Corporation. All Rights Reserved.
- *
- *   This program is free software; you can redistribute it and/or
- *   modify it under the terms of the GNU General Public License
- *   as published by the Free Software Foundation, version 2.
- *
- *   This program is distributed in the hope that it will be useful, but
- *   WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- *   NON INFRINGEMENT.  See the GNU General Public License for
- *   more details.
- */
-
-#include <linux/string.h>
-#include <linux/smp.h>
-#include <linux/module.h>
-#include <linux/uaccess.h>
-#include <asm/fixmap.h>
-#include <asm/kmap_types.h>
-#include <asm/tlbflush.h>
-#include <hv/hypervisor.h>
-#include <arch/chip.h>
-
-
-#if !CHIP_HAS_COHERENT_LOCAL_CACHE()
-
-/* Defined in memcpy.S */
-extern unsigned long __memcpy_asm(void *to, const void *from, unsigned long n);
-extern unsigned long __copy_to_user_inatomic_asm(
-	void __user *to, const void *from, unsigned long n);
-extern unsigned long __copy_from_user_inatomic_asm(
-	void *to, const void __user *from, unsigned long n);
-extern unsigned long __copy_from_user_zeroing_asm(
-	void *to, const void __user *from, unsigned long n);
-
-typedef unsigned long (*memcpy_t)(void *, const void *, unsigned long);
-
-/* Size above which to consider TLB games for performance */
-#define LARGE_COPY_CUTOFF 2048
-
-/* Communicate to the simulator what we are trying to do. */
-#define sim_allow_multiple_caching(b) \
-  __insn_mtspr(SPR_SIM_CONTROL, \
-   SIM_CONTROL_ALLOW_MULTIPLE_CACHING | ((b) << _SIM_CONTROL_OPERATOR_BITS))
-
-/*
- * Copy memory by briefly enabling incoherent cacheline-at-a-time mode.
- *
- * We set up our own source and destination PTEs that we fully control.
- * This is the only way to guarantee that we don't race with another
- * thread that is modifying the PTE; we can't afford to try the
- * copy_{to,from}_user() technique of catching the interrupt, since
- * we must run with interrupts disabled to avoid the risk of some
- * other code seeing the incoherent data in our cache.  (Recall that
- * our cache is indexed by PA, so even if the other code doesn't use
- * our kmap_atomic virtual addresses, they'll still hit in cache using
- * the normal VAs that aren't supposed to hit in cache.)
- */
-static void memcpy_multicache(void *dest, const void *source,
-			      pte_t dst_pte, pte_t src_pte, int len)
-{
-	int idx;
-	unsigned long flags, newsrc, newdst;
-	pmd_t *pmdp;
-	pte_t *ptep;
-	int type0, type1;
-	int cpu = get_cpu();
-
-	/*
-	 * Disable interrupts so that we don't recurse into memcpy()
-	 * in an interrupt handler, nor accidentally reference
-	 * the PA of the source from an interrupt routine.  Also
-	 * notify the simulator that we're playing games so we don't
-	 * generate spurious coherency warnings.
-	 */
-	local_irq_save(flags);
-	sim_allow_multiple_caching(1);
-
-	/* Set up the new dest mapping */
-	type0 = kmap_atomic_idx_push();
-	idx = FIX_KMAP_BEGIN + (KM_TYPE_NR * cpu) + type0;
-	newdst = __fix_to_virt(idx) + ((unsigned long)dest & (PAGE_SIZE-1));
-	pmdp = pmd_offset(pud_offset(pgd_offset_k(newdst), newdst), newdst);
-	ptep = pte_offset_kernel(pmdp, newdst);
-	if (pte_val(*ptep) != pte_val(dst_pte)) {
-		set_pte(ptep, dst_pte);
-		local_flush_tlb_page(NULL, newdst, PAGE_SIZE);
-	}
-
-	/* Set up the new source mapping */
-	type1 = kmap_atomic_idx_push();
-	idx += (type0 - type1);
-	src_pte = hv_pte_set_nc(src_pte);
-	src_pte = hv_pte_clear_writable(src_pte);  /* be paranoid */
-	newsrc = __fix_to_virt(idx) + ((unsigned long)source & (PAGE_SIZE-1));
-	pmdp = pmd_offset(pud_offset(pgd_offset_k(newsrc), newsrc), newsrc);
-	ptep = pte_offset_kernel(pmdp, newsrc);
-	__set_pte(ptep, src_pte);   /* set_pte() would be confused by this */
-	local_flush_tlb_page(NULL, newsrc, PAGE_SIZE);
-
-	/* Actually move the data. */
-	__memcpy_asm((void *)newdst, (const void *)newsrc, len);
-
-	/*
-	 * Remap the source as locally-cached and not OLOC'ed so that
-	 * we can inval without also invaling the remote cpu's cache.
-	 * This also avoids known errata with inv'ing cacheable oloc data.
-	 */
-	src_pte = hv_pte_set_mode(src_pte, HV_PTE_MODE_CACHE_NO_L3);
-	src_pte = hv_pte_set_writable(src_pte); /* need write access for inv */
-	__set_pte(ptep, src_pte);   /* set_pte() would be confused by this */
-	local_flush_tlb_page(NULL, newsrc, PAGE_SIZE);
-
-	/*
-	 * Do the actual invalidation, covering the full L2 cache line
-	 * at the end since __memcpy_asm() is somewhat aggressive.
-	 */
-	__inv_buffer((void *)newsrc, len);
-
-	/*
-	 * We're done: notify the simulator that all is back to normal,
-	 * and re-enable interrupts and pre-emption.
-	 */
-	kmap_atomic_idx_pop();
-	kmap_atomic_idx_pop();
-	sim_allow_multiple_caching(0);
-	local_irq_restore(flags);
-	put_cpu();
-}
-
-/*
- * Identify large copies from remotely-cached memory, and copy them
- * via memcpy_multicache() if they look good, otherwise fall back
- * to the particular kind of copying passed as the memcpy_t function.
- */
-static unsigned long fast_copy(void *dest, const void *source, int len,
-			       memcpy_t func)
-{
-	/*
-	 * Check if it's big enough to bother with.  We may end up doing a
-	 * small copy via TLB manipulation if we're near a page boundary,
-	 * but presumably we'll make it up when we hit the second page.
-	 */
-	while (len >= LARGE_COPY_CUTOFF) {
-		int copy_size, bytes_left_on_page;
-		pte_t *src_ptep, *dst_ptep;
-		pte_t src_pte, dst_pte;
-		struct page *src_page, *dst_page;
-
-		/* Is the source page oloc'ed to a remote cpu? */
-retry_source:
-		src_ptep = virt_to_pte(current->mm, (unsigned long)source);
-		if (src_ptep == NULL)
-			break;
-		src_pte = *src_ptep;
-		if (!hv_pte_get_present(src_pte) ||
-		    !hv_pte_get_readable(src_pte) ||
-		    hv_pte_get_mode(src_pte) != HV_PTE_MODE_CACHE_TILE_L3)
-			break;
-		if (get_remote_cache_cpu(src_pte) == smp_processor_id())
-			break;
-		src_page = pfn_to_page(pte_pfn(src_pte));
-		get_page(src_page);
-		if (pte_val(src_pte) != pte_val(*src_ptep)) {
-			put_page(src_page);
-			goto retry_source;
-		}
-		if (pte_huge(src_pte)) {
-			/* Adjust the PTE to correspond to a small page */
-			int pfn = pte_pfn(src_pte);
-			pfn += (((unsigned long)source & (HPAGE_SIZE-1))
-				>> PAGE_SHIFT);
-			src_pte = pfn_pte(pfn, src_pte);
-			src_pte = pte_mksmall(src_pte);
-		}
-
-		/* Is the destination page writable? */
-retry_dest:
-		dst_ptep = virt_to_pte(current->mm, (unsigned long)dest);
-		if (dst_ptep == NULL) {
-			put_page(src_page);
-			break;
-		}
-		dst_pte = *dst_ptep;
-		if (!hv_pte_get_present(dst_pte) ||
-		    !hv_pte_get_writable(dst_pte)) {
-			put_page(src_page);
-			break;
-		}
-		dst_page = pfn_to_page(pte_pfn(dst_pte));
-		if (dst_page == src_page) {
-			/*
-			 * Source and dest are on the same page; this
-			 * potentially exposes us to incoherence if any
-			 * part of src and dest overlap on a cache line.
-			 * Just give up rather than trying to be precise.
-			 */
-			put_page(src_page);
-			break;
-		}
-		get_page(dst_page);
-		if (pte_val(dst_pte) != pte_val(*dst_ptep)) {
-			put_page(dst_page);
-			goto retry_dest;
-		}
-		if (pte_huge(dst_pte)) {
-			/* Adjust the PTE to correspond to a small page */
-			int pfn = pte_pfn(dst_pte);
-			pfn += (((unsigned long)dest & (HPAGE_SIZE-1))
-				>> PAGE_SHIFT);
-			dst_pte = pfn_pte(pfn, dst_pte);
-			dst_pte = pte_mksmall(dst_pte);
-		}
-
-		/* All looks good: create a cachable PTE and copy from it */
-		copy_size = len;
-		bytes_left_on_page =
-			PAGE_SIZE - (((int)source) & (PAGE_SIZE-1));
-		if (copy_size > bytes_left_on_page)
-			copy_size = bytes_left_on_page;
-		bytes_left_on_page =
-			PAGE_SIZE - (((int)dest) & (PAGE_SIZE-1));
-		if (copy_size > bytes_left_on_page)
-			copy_size = bytes_left_on_page;
-		memcpy_multicache(dest, source, dst_pte, src_pte, copy_size);
-
-		/* Release the pages */
-		put_page(dst_page);
-		put_page(src_page);
-
-		/* Continue on the next page */
-		dest += copy_size;
-		source += copy_size;
-		len -= copy_size;
-	}
-
-	return func(dest, source, len);
-}
-
-void *memcpy(void *to, const void *from, __kernel_size_t n)
-{
-	if (n < LARGE_COPY_CUTOFF)
-		return (void *)__memcpy_asm(to, from, n);
-	else
-		return (void *)fast_copy(to, from, n, __memcpy_asm);
-}
-
-unsigned long __copy_to_user_inatomic(void __user *to, const void *from,
-				      unsigned long n)
-{
-	if (n < LARGE_COPY_CUTOFF)
-		return __copy_to_user_inatomic_asm(to, from, n);
-	else
-		return fast_copy(to, from, n, __copy_to_user_inatomic_asm);
-}
-
-unsigned long __copy_from_user_inatomic(void *to, const void __user *from,
-					unsigned long n)
-{
-	if (n < LARGE_COPY_CUTOFF)
-		return __copy_from_user_inatomic_asm(to, from, n);
-	else
-		return fast_copy(to, from, n, __copy_from_user_inatomic_asm);
-}
-
-unsigned long __copy_from_user_zeroing(void *to, const void __user *from,
-				       unsigned long n)
-{
-	if (n < LARGE_COPY_CUTOFF)
-		return __copy_from_user_zeroing_asm(to, from, n);
-	else
-		return fast_copy(to, from, n, __copy_from_user_zeroing_asm);
-}
-
-#endif /* !CHIP_HAS_COHERENT_LOCAL_CACHE() */
diff --git a/arch/tile/lib/memcpy_user_64.c b/arch/tile/lib/memcpy_user_64.c
index 37440ca..88c7016 100644
--- a/arch/tile/lib/memcpy_user_64.c
+++ b/arch/tile/lib/memcpy_user_64.c
@@ -31,6 +31,7 @@
 		    ".pushsection .coldtext.memcpy,\"ax\";"	\
 		    "2: { move r0, %2; jrp lr };"		\
 		    ".section __ex_table,\"a\";"		\
+		    ".align 8;"					\
 		    ".quad 1b, 2b;"				\
 		    ".popsection"				\
 		    : "=m" (*(p)) : "r" (v), "r" (n));		\
@@ -43,6 +44,7 @@
 		    ".pushsection .coldtext.memcpy,\"ax\";"	\
 		    "2: { move r0, %2; jrp lr };"		\
 		    ".section __ex_table,\"a\";"		\
+		    ".align 8;"					\
 		    ".quad 1b, 2b;"				\
 		    ".popsection"				\
 		    : "=r" (__v) : "m" (*(p)), "r" (n));	\
diff --git a/arch/tile/lib/memset_32.c b/arch/tile/lib/memset_32.c
index 57dbb3a..2042bfe 100644
--- a/arch/tile/lib/memset_32.c
+++ b/arch/tile/lib/memset_32.c
@@ -12,13 +12,10 @@
  *   more details.
  */
 
-#include <arch/chip.h>
-
 #include <linux/types.h>
 #include <linux/string.h>
 #include <linux/module.h>
-
-#undef memset
+#include <arch/chip.h>
 
 void *memset(void *s, int c, size_t n)
 {
@@ -26,11 +23,7 @@ void *memset(void *s, int c, size_t n)
 	int n32;
 	uint32_t v16, v32;
 	uint8_t *out8 = s;
-#if !CHIP_HAS_WH64()
-	int ahead32;
-#else
 	int to_align32;
-#endif
 
 	/* Experimentation shows that a trivial tight loop is a win up until
 	 * around a size of 20, where writing a word at a time starts to win.
@@ -61,21 +54,6 @@ void *memset(void *s, int c, size_t n)
 		return s;
 	}
 
-#if !CHIP_HAS_WH64()
-	/* Use a spare issue slot to start prefetching the first cache
-	 * line early. This instruction is free as the store can be buried
-	 * in otherwise idle issue slots doing ALU ops.
-	 */
-	__insn_prefetch(out8);
-
-	/* We prefetch the end so that a short memset that spans two cache
-	 * lines gets some prefetching benefit. Again we believe this is free
-	 * to issue.
-	 */
-	__insn_prefetch(&out8[n - 1]);
-#endif /* !CHIP_HAS_WH64() */
-
-
 	/* Align 'out8'. We know n >= 3 so this won't write past the end. */
 	while (((uintptr_t) out8 & 3) != 0) {
 		*out8++ = c;
@@ -96,90 +74,6 @@ void *memset(void *s, int c, size_t n)
 	/* This must be at least 8 or the following loop doesn't work. */
 #define CACHE_LINE_SIZE_IN_WORDS (CHIP_L2_LINE_SIZE() / 4)
 
-#if !CHIP_HAS_WH64()
-
-	ahead32 = CACHE_LINE_SIZE_IN_WORDS;
-
-	/* We already prefetched the first and last cache lines, so
-	 * we only need to do more prefetching if we are storing
-	 * to more than two cache lines.
-	 */
-	if (n32 > CACHE_LINE_SIZE_IN_WORDS * 2) {
-		int i;
-
-		/* Prefetch the next several cache lines.
-		 * This is the setup code for the software-pipelined
-		 * loop below.
-		 */
-#define MAX_PREFETCH 5
-		ahead32 = n32 & -CACHE_LINE_SIZE_IN_WORDS;
-		if (ahead32 > MAX_PREFETCH * CACHE_LINE_SIZE_IN_WORDS)
-			ahead32 = MAX_PREFETCH * CACHE_LINE_SIZE_IN_WORDS;
-
-		for (i = CACHE_LINE_SIZE_IN_WORDS;
-		     i < ahead32; i += CACHE_LINE_SIZE_IN_WORDS)
-			__insn_prefetch(&out32[i]);
-	}
-
-	if (n32 > ahead32) {
-		while (1) {
-			int j;
-
-			/* Prefetch by reading one word several cache lines
-			 * ahead.  Since loads are non-blocking this will
-			 * cause the full cache line to be read while we are
-			 * finishing earlier cache lines.  Using a store
-			 * here causes microarchitectural performance
-			 * problems where a victimizing store miss goes to
-			 * the head of the retry FIFO and locks the pipe for
-			 * a few cycles.  So a few subsequent stores in this
-			 * loop go into the retry FIFO, and then later
-			 * stores see other stores to the same cache line
-			 * are already in the retry FIFO and themselves go
-			 * into the retry FIFO, filling it up and grinding
-			 * to a halt waiting for the original miss to be
-			 * satisfied.
-			 */
-			__insn_prefetch(&out32[ahead32]);
-
-#if CACHE_LINE_SIZE_IN_WORDS % 4 != 0
-#error "Unhandled CACHE_LINE_SIZE_IN_WORDS"
-#endif
-
-			n32 -= CACHE_LINE_SIZE_IN_WORDS;
-
-			/* Save icache space by only partially unrolling
-			 * this loop.
-			 */
-			for (j = CACHE_LINE_SIZE_IN_WORDS / 4; j > 0; j--) {
-				*out32++ = v32;
-				*out32++ = v32;
-				*out32++ = v32;
-				*out32++ = v32;
-			}
-
-			/* To save compiled code size, reuse this loop even
-			 * when we run out of prefetching to do by dropping
-			 * ahead32 down.
-			 */
-			if (n32 <= ahead32) {
-				/* Not even a full cache line left,
-				 * so stop now.
-				 */
-				if (n32 < CACHE_LINE_SIZE_IN_WORDS)
-					break;
-
-				/* Choose a small enough value that we don't
-				 * prefetch past the end.  There's no sense
-				 * in touching cache lines we don't have to.
-				 */
-				ahead32 = CACHE_LINE_SIZE_IN_WORDS - 1;
-			}
-		}
-	}
-
-#else /* CHIP_HAS_WH64() */
-
 	/* Determine how many words we need to emit before the 'out32'
 	 * pointer becomes aligned modulo the cache line size.
 	 */
@@ -236,8 +130,6 @@ void *memset(void *s, int c, size_t n)
 		n32 &= CACHE_LINE_SIZE_IN_WORDS - 1;
 	}
 
-#endif /* CHIP_HAS_WH64() */
-
 	/* Now handle any leftover values. */
 	if (n32 != 0) {
 		do {
diff --git a/arch/tile/lib/memset_64.c b/arch/tile/lib/memset_64.c
index 3873085..03ef69c 100644
--- a/arch/tile/lib/memset_64.c
+++ b/arch/tile/lib/memset_64.c
@@ -12,13 +12,11 @@
  *   more details.
  */
 
-#include <arch/chip.h>
-
 #include <linux/types.h>
 #include <linux/string.h>
 #include <linux/module.h>
-
-#undef memset
+#include <arch/chip.h>
+#include "string-endian.h"
 
 void *memset(void *s, int c, size_t n)
 {
@@ -70,8 +68,7 @@ void *memset(void *s, int c, size_t n)
 	n64 = n >> 3;
 
 	/* Tile input byte out to 64 bits. */
-	/* KLUDGE */
-	v64 = 0x0101010101010101ULL * (uint8_t)c;
+	v64 = copy_byte(c);
 
 	/* This must be at least 8 or the following loop doesn't work. */
 #define CACHE_LINE_SIZE_IN_DOUBLEWORDS (CHIP_L2_LINE_SIZE() / 8)
diff --git a/arch/tile/lib/strchr_32.c b/arch/tile/lib/strchr_32.c
index c94e6f7..841fe69 100644
--- a/arch/tile/lib/strchr_32.c
+++ b/arch/tile/lib/strchr_32.c
@@ -16,8 +16,6 @@
 #include <linux/string.h>
 #include <linux/module.h>
 
-#undef strchr
-
 char *strchr(const char *s, int c)
 {
 	int z, g;
diff --git a/arch/tile/lib/strchr_64.c b/arch/tile/lib/strchr_64.c
index f39f9dc..fe6e31c 100644
--- a/arch/tile/lib/strchr_64.c
+++ b/arch/tile/lib/strchr_64.c
@@ -26,7 +26,7 @@ char *strchr(const char *s, int c)
 	const uint64_t *p = (const uint64_t *)(s_int & -8);
 
 	/* Create eight copies of the byte for which we are looking. */
-	const uint64_t goal = 0x0101010101010101ULL * (uint8_t) c;
+	const uint64_t goal = copy_byte(c);
 
 	/* Read the first aligned word, but force bytes before the string to
 	 * match neither zero nor goal (we make sure the high bit of each
diff --git a/arch/tile/lib/string-endian.h b/arch/tile/lib/string-endian.h
index c0eed7c..2e49cbf 100644
--- a/arch/tile/lib/string-endian.h
+++ b/arch/tile/lib/string-endian.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2011 Tilera Corporation. All Rights Reserved.
+ * Copyright 2013 Tilera Corporation. All Rights Reserved.
  *
  *   This program is free software; you can redistribute it and/or
  *   modify it under the terms of the GNU General Public License
@@ -31,3 +31,14 @@
 #define CFZ(x) __insn_clz(x)
 #define REVCZ(x) __insn_ctz(x)
 #endif
+
+/*
+ * Create eight copies of the byte in a uint64_t.  Byte Shuffle uses
+ * the bytes of srcB as the index into the dest vector to select a
+ * byte.  With all indices of zero, the first byte is copied into all
+ * the other bytes.
+ */
+static inline uint64_t copy_byte(uint8_t byte)
+{
+	return __insn_shufflebytes(byte, 0, 0);
+}
diff --git a/arch/tile/lib/strlen_32.c b/arch/tile/lib/strlen_32.c
index 4974292..f26f88e 100644
--- a/arch/tile/lib/strlen_32.c
+++ b/arch/tile/lib/strlen_32.c
@@ -16,8 +16,6 @@
 #include <linux/string.h>
 #include <linux/module.h>
 
-#undef strlen
-
 size_t strlen(const char *s)
 {
 	/* Get an aligned pointer. */
diff --git a/arch/tile/lib/strnlen_32.c b/arch/tile/lib/strnlen_32.c
new file mode 100644
index 0000000..1434141
--- /dev/null
+++ b/arch/tile/lib/strnlen_32.c
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2013 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/module.h>
+
+size_t strnlen(const char *s, size_t count)
+{
+	/* Get an aligned pointer. */
+	const uintptr_t s_int = (uintptr_t) s;
+	const uint32_t *p = (const uint32_t *)(s_int & -4);
+	size_t bytes_read = sizeof(*p) - (s_int & (sizeof(*p) - 1));
+	size_t len;
+	uint32_t v, bits;
+
+	/* Avoid page fault risk by not reading any bytes when count is 0. */
+	if (count == 0)
+		return 0;
+
+	/* Read first word, but force bytes before the string to be nonzero. */
+	v = *p | ((1 << ((s_int << 3) & 31)) - 1);
+
+	while ((bits = __insn_seqb(v, 0)) == 0) {
+		if (bytes_read >= count) {
+			/* Read COUNT bytes and didn't find the terminator. */
+			return count;
+		}
+		v = *++p;
+		bytes_read += sizeof(v);
+	}
+
+	len = ((const char *) p) + (__insn_ctz(bits) >> 3) - s;
+	return (len < count ? len : count);
+}
+EXPORT_SYMBOL(strnlen);
diff --git a/arch/tile/lib/strnlen_64.c b/arch/tile/lib/strnlen_64.c
new file mode 100644
index 0000000..2e8de6a
--- /dev/null
+++ b/arch/tile/lib/strnlen_64.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2013 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/module.h>
+#include "string-endian.h"
+
+size_t strnlen(const char *s, size_t count)
+{
+	/* Get an aligned pointer. */
+	const uintptr_t s_int = (uintptr_t) s;
+	const uint64_t *p = (const uint64_t *)(s_int & -8);
+	size_t bytes_read = sizeof(*p) - (s_int & (sizeof(*p) - 1));
+	size_t len;
+	uint64_t v, bits;
+
+	/* Avoid page fault risk by not reading any bytes when count is 0. */
+	if (count == 0)
+		return 0;
+
+	/* Read and MASK the first word. */
+	v = *p | MASK(s_int);
+
+	while ((bits = __insn_v1cmpeqi(v, 0)) == 0) {
+		if (bytes_read >= count) {
+			/* Read COUNT bytes and didn't find the terminator. */
+			return count;
+		}
+		v = *++p;
+		bytes_read += sizeof(v);
+	}
+
+	len = ((const char *) p) + (CFZ(bits) >> 3) - s;
+	return (len < count ? len : count);
+}
+EXPORT_SYMBOL(strnlen);
diff --git a/arch/tile/lib/usercopy_32.S b/arch/tile/lib/usercopy_32.S
index b62d002..1bc1622 100644
--- a/arch/tile/lib/usercopy_32.S
+++ b/arch/tile/lib/usercopy_32.S
@@ -36,6 +36,7 @@ strnlen_user_fault:
 	{ move r0, zero; jrp lr }
 	ENDPROC(strnlen_user_fault)
 	.section __ex_table,"a"
+	.align 4
 	.word 1b, strnlen_user_fault
 	.popsection
 
@@ -47,18 +48,20 @@ strnlen_user_fault:
  */
 STD_ENTRY(strncpy_from_user_asm)
 	{ bz r2, 2f; move r3, r0 }
-1:      { lb_u r4, r1; addi r1, r1, 1; addi r2, r2, -1 }
+1:	{ lb_u r4, r1; addi r1, r1, 1; addi r2, r2, -1 }
 	{ sb r0, r4; addi r0, r0, 1 }
-	bz r2, 2f
-	bnzt r4, 1b
-	addi r0, r0, -1   /* don't count the trailing NUL */
-2:      { sub r0, r0, r3; jrp lr }
+	bz r4, 2f
+	bnzt r2, 1b
+	{ sub r0, r0, r3; jrp lr }
+2:	addi r0, r0, -1   /* don't count the trailing NUL */
+	{ sub r0, r0, r3; jrp lr }
 	STD_ENDPROC(strncpy_from_user_asm)
 	.pushsection .fixup,"ax"
 strncpy_from_user_fault:
 	{ movei r0, -EFAULT; jrp lr }
 	ENDPROC(strncpy_from_user_fault)
 	.section __ex_table,"a"
+	.align 4
 	.word 1b, strncpy_from_user_fault
 	.popsection
 
@@ -77,6 +80,7 @@ STD_ENTRY(clear_user_asm)
 	bnzt r1, 1b
 2:      { move r0, r1; jrp lr }
 	.pushsection __ex_table,"a"
+	.align 4
 	.word 1b, 2b
 	.popsection
 
@@ -86,6 +90,7 @@ STD_ENTRY(clear_user_asm)
 2:      { move r0, r1; jrp lr }
 	STD_ENDPROC(clear_user_asm)
 	.pushsection __ex_table,"a"
+	.align 4
 	.word 1b, 2b
 	.popsection
 
@@ -105,25 +110,7 @@ STD_ENTRY(flush_user_asm)
 2:      { move r0, r1; jrp lr }
 	STD_ENDPROC(flush_user_asm)
 	.pushsection __ex_table,"a"
-	.word 1b, 2b
-	.popsection
-
-/*
- * inv_user_asm takes the user target address in r0 and the
- * number of bytes to invalidate in r1.
- * It returns the number of not inv'able bytes (hopefully zero) in r0.
- */
-STD_ENTRY(inv_user_asm)
-	bz r1, 2f
-	{ movei r2, L2_CACHE_BYTES; add r1, r0, r1 }
-	{ sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 }
-	{ and r0, r0, r2; and r1, r1, r2 }
-	{ sub r1, r1, r0 }
-1:      { inv r0; addi r1, r1, -CHIP_INV_STRIDE() }
-	{ addi r0, r0, CHIP_INV_STRIDE(); bnzt r1, 1b }
-2:      { move r0, r1; jrp lr }
-	STD_ENDPROC(inv_user_asm)
-	.pushsection __ex_table,"a"
+	.align 4
 	.word 1b, 2b
 	.popsection
 
@@ -143,5 +130,6 @@ STD_ENTRY(finv_user_asm)
 2:      { move r0, r1; jrp lr }
 	STD_ENDPROC(finv_user_asm)
 	.pushsection __ex_table,"a"
+	.align 4
 	.word 1b, 2b
 	.popsection
diff --git a/arch/tile/lib/usercopy_64.S b/arch/tile/lib/usercopy_64.S
index adb2dbb..b3b31a3 100644
--- a/arch/tile/lib/usercopy_64.S
+++ b/arch/tile/lib/usercopy_64.S
@@ -36,6 +36,7 @@ strnlen_user_fault:
 	{ move r0, zero; jrp lr }
 	ENDPROC(strnlen_user_fault)
 	.section __ex_table,"a"
+	.align 8
 	.quad 1b, strnlen_user_fault
 	.popsection
 
@@ -47,18 +48,20 @@ strnlen_user_fault:
  */
 STD_ENTRY(strncpy_from_user_asm)
 	{ beqz r2, 2f; move r3, r0 }
-1:      { ld1u r4, r1; addi r1, r1, 1; addi r2, r2, -1 }
+1:	{ ld1u r4, r1; addi r1, r1, 1; addi r2, r2, -1 }
 	{ st1 r0, r4; addi r0, r0, 1 }
-	beqz r2, 2f
-	bnezt r4, 1b
-	addi r0, r0, -1   /* don't count the trailing NUL */
-2:      { sub r0, r0, r3; jrp lr }
+	beqz r4, 2f
+	bnezt r2, 1b
+	{ sub r0, r0, r3; jrp lr }
+2:	addi r0, r0, -1   /* don't count the trailing NUL */
+	{ sub r0, r0, r3; jrp lr }
 	STD_ENDPROC(strncpy_from_user_asm)
 	.pushsection .fixup,"ax"
 strncpy_from_user_fault:
 	{ movei r0, -EFAULT; jrp lr }
 	ENDPROC(strncpy_from_user_fault)
 	.section __ex_table,"a"
+	.align 8
 	.quad 1b, strncpy_from_user_fault
 	.popsection
 
@@ -77,6 +80,7 @@ STD_ENTRY(clear_user_asm)
 	bnezt r1, 1b
 2:      { move r0, r1; jrp lr }
 	.pushsection __ex_table,"a"
+	.align 8
 	.quad 1b, 2b
 	.popsection
 
@@ -86,6 +90,7 @@ STD_ENTRY(clear_user_asm)
 2:      { move r0, r1; jrp lr }
 	STD_ENDPROC(clear_user_asm)
 	.pushsection __ex_table,"a"
+	.align 8
 	.quad 1b, 2b
 	.popsection
 
@@ -105,25 +110,7 @@ STD_ENTRY(flush_user_asm)
 2:      { move r0, r1; jrp lr }
 	STD_ENDPROC(flush_user_asm)
 	.pushsection __ex_table,"a"
-	.quad 1b, 2b
-	.popsection
-
-/*
- * inv_user_asm takes the user target address in r0 and the
- * number of bytes to invalidate in r1.
- * It returns the number of not inv'able bytes (hopefully zero) in r0.
- */
-STD_ENTRY(inv_user_asm)
-	beqz r1, 2f
-	{ movei r2, L2_CACHE_BYTES; add r1, r0, r1 }
-	{ sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 }
-	{ and r0, r0, r2; and r1, r1, r2 }
-	{ sub r1, r1, r0 }
-1:      { inv r0; addi r1, r1, -CHIP_INV_STRIDE() }
-	{ addi r0, r0, CHIP_INV_STRIDE(); bnezt r1, 1b }
-2:      { move r0, r1; jrp lr }
-	STD_ENDPROC(inv_user_asm)
-	.pushsection __ex_table,"a"
+	.align 8
 	.quad 1b, 2b
 	.popsection
 
@@ -143,5 +130,6 @@ STD_ENTRY(finv_user_asm)
 2:      { move r0, r1; jrp lr }
 	STD_ENDPROC(finv_user_asm)
 	.pushsection __ex_table,"a"
+	.align 8
 	.quad 1b, 2b
 	.popsection
diff --git a/arch/tile/mm/elf.c b/arch/tile/mm/elf.c
index 743c951..23f044e 100644
--- a/arch/tile/mm/elf.c
+++ b/arch/tile/mm/elf.c
@@ -21,7 +21,8 @@
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/sections.h>
-#include <arch/sim_def.h>
+#include <asm/vdso.h>
+#include <arch/sim.h>
 
 /* Notify a running simulator, if any, that an exec just occurred. */
 static void sim_notify_exec(const char *binary_name)
@@ -38,21 +39,55 @@ static void sim_notify_exec(const char *binary_name)
 
 static int notify_exec(struct mm_struct *mm)
 {
-	int retval = 0;  /* failure */
-
-	if (mm->exe_file) {
-		char *buf = (char *) __get_free_page(GFP_KERNEL);
-		if (buf) {
-			char *path = d_path(&mm->exe_file->f_path,
-					    buf, PAGE_SIZE);
-			if (!IS_ERR(path)) {
-				sim_notify_exec(path);
-				retval = 1;
-			}
-			free_page((unsigned long)buf);
+	char *buf, *path;
+	struct vm_area_struct *vma;
+
+	if (!sim_is_simulator())
+		return 1;
+
+	if (mm->exe_file == NULL)
+		return 0;
+
+	for (vma = current->mm->mmap; ; vma = vma->vm_next) {
+		if (vma == NULL)
+			return 0;
+		if (vma->vm_file == mm->exe_file)
+			break;
+	}
+
+	buf = (char *) __get_free_page(GFP_KERNEL);
+	if (buf == NULL)
+		return 0;
+
+	path = d_path(&mm->exe_file->f_path, buf, PAGE_SIZE);
+	if (IS_ERR(path)) {
+		free_page((unsigned long)buf);
+		return 0;
+	}
+
+	/*
+	 * Notify simulator of an ET_DYN object so we know the load address.
+	 * The somewhat cryptic overuse of SIM_CONTROL_DLOPEN allows us
+	 * to be backward-compatible with older simulator releases.
+	 */
+	if (vma->vm_start == (ELF_ET_DYN_BASE & PAGE_MASK)) {
+		char buf[64];
+		int i;
+
+		snprintf(buf, sizeof(buf), "0x%lx:@", vma->vm_start);
+		for (i = 0; ; ++i) {
+			char c = buf[i];
+			__insn_mtspr(SPR_SIM_CONTROL,
+				     (SIM_CONTROL_DLOPEN
+				      | (c << _SIM_CONTROL_OPERATOR_BITS)));
+			if (c == '\0')
+				break;
 		}
 	}
-	return retval;
+
+	sim_notify_exec(path);
+	free_page((unsigned long)buf);
+	return 1;
 }
 
 /* Notify a running simulator, if any, that we loaded an interpreter. */
@@ -68,37 +103,10 @@ static void sim_notify_interp(unsigned long load_addr)
 }
 
 
-/* Kernel address of page used to map read-only kernel data into userspace. */
-static void *vdso_page;
-
-/* One-entry array used for install_special_mapping. */
-static struct page *vdso_pages[1];
-
-static int __init vdso_setup(void)
-{
-	vdso_page = (void *)get_zeroed_page(GFP_ATOMIC);
-	memcpy(vdso_page, __rt_sigreturn, __rt_sigreturn_end - __rt_sigreturn);
-	vdso_pages[0] = virt_to_page(vdso_page);
-	return 0;
-}
-device_initcall(vdso_setup);
-
-const char *arch_vma_name(struct vm_area_struct *vma)
-{
-	if (vma->vm_private_data == vdso_pages)
-		return "[vdso]";
-#ifndef __tilegx__
-	if (vma->vm_start == MEM_USER_INTRPT)
-		return "[intrpt]";
-#endif
-	return NULL;
-}
-
 int arch_setup_additional_pages(struct linux_binprm *bprm,
 				int executable_stack)
 {
 	struct mm_struct *mm = current->mm;
-	unsigned long vdso_base;
 	int retval = 0;
 
 	down_write(&mm->mmap_sem);
@@ -111,14 +119,7 @@ int arch_setup_additional_pages(struct linux_binprm *bprm,
 	if (!notify_exec(mm))
 		sim_notify_exec(bprm->filename);
 
-	/*
-	 * MAYWRITE to allow gdb to COW and set breakpoints
-	 */
-	vdso_base = VDSO_BASE;
-	retval = install_special_mapping(mm, vdso_base, PAGE_SIZE,
-					 VM_READ|VM_EXEC|
-					 VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC,
-					 vdso_pages);
+	retval = setup_vdso_pages();
 
 #ifndef __tilegx__
 	/*
diff --git a/arch/tile/mm/fault.c b/arch/tile/mm/fault.c
index f7f99f9..6c05712 100644
--- a/arch/tile/mm/fault.c
+++ b/arch/tile/mm/fault.c
@@ -34,6 +34,7 @@
 #include <linux/hugetlb.h>
 #include <linux/syscalls.h>
 #include <linux/uaccess.h>
+#include <linux/kdebug.h>
 
 #include <asm/pgalloc.h>
 #include <asm/sections.h>
@@ -122,10 +123,9 @@ static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
 	pmd_k = pmd_offset(pud_k, address);
 	if (!pmd_present(*pmd_k))
 		return NULL;
-	if (!pmd_present(*pmd)) {
+	if (!pmd_present(*pmd))
 		set_pmd(pmd, *pmd_k);
-		arch_flush_lazy_mmu_mode();
-	} else
+	else
 		BUG_ON(pmd_ptfn(*pmd) != pmd_ptfn(*pmd_k));
 	return pmd_k;
 }
@@ -149,8 +149,6 @@ static inline int vmalloc_fault(pgd_t *pgd, unsigned long address)
 	pmd_k = vmalloc_sync_one(pgd, address);
 	if (!pmd_k)
 		return -1;
-	if (pmd_huge(*pmd_k))
-		return 0;   /* support TILE huge_vmap() API */
 	pte_k = pte_offset_kernel(pmd_k, address);
 	if (!pte_present(*pte_k))
 		return -1;
@@ -280,10 +278,9 @@ static int handle_page_fault(struct pt_regs *regs,
 	if (!is_page_fault)
 		write = 1;
 
-	flags = (FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
-		 (write ? FAULT_FLAG_WRITE : 0));
+	flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
 
-	is_kernel_mode = (EX1_PL(regs->ex1) != USER_PL);
+	is_kernel_mode = !user_mode(regs);
 
 	tsk = validate_current();
 
@@ -365,6 +362,9 @@ static int handle_page_fault(struct pt_regs *regs,
 		goto bad_area_nosemaphore;
 	}
 
+	if (!is_kernel_mode)
+		flags |= FAULT_FLAG_USER;
+
 	/*
 	 * When running in the kernel we expect faults to occur only to
 	 * addresses in user space.  All other faults represent errors in the
@@ -425,12 +425,12 @@ good_area:
 #endif
 		if (!(vma->vm_flags & VM_WRITE))
 			goto bad_area;
+		flags |= FAULT_FLAG_WRITE;
 	} else {
 		if (!is_page_fault || !(vma->vm_flags & VM_READ))
 			goto bad_area;
 	}
 
- survive:
 	/*
 	 * If for any reason at all we couldn't handle the fault,
 	 * make sure we exit gracefully rather than endlessly redo
@@ -466,28 +466,15 @@ good_area:
 		}
 	}
 
-#if CHIP_HAS_TILE_DMA() || CHIP_HAS_SN_PROC()
-	/*
-	 * If this was an asynchronous fault,
-	 * restart the appropriate engine.
-	 */
-	switch (fault_num) {
 #if CHIP_HAS_TILE_DMA()
+	/* If this was a DMA TLB fault, restart the DMA engine. */
+	switch (fault_num) {
 	case INT_DMATLB_MISS:
 	case INT_DMATLB_MISS_DWNCL:
 	case INT_DMATLB_ACCESS:
 	case INT_DMATLB_ACCESS_DWNCL:
 		__insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__REQUEST_MASK);
 		break;
-#endif
-#if CHIP_HAS_SN_PROC()
-	case INT_SNITLB_MISS:
-	case INT_SNITLB_MISS_DWNCL:
-		__insn_mtspr(SPR_SNCTL,
-			     __insn_mfspr(SPR_SNCTL) &
-			     ~SPR_SNCTL__FRZPROC_MASK);
-		break;
-#endif
 	}
 #endif
 
@@ -568,11 +555,6 @@ no_context:
  */
 out_of_memory:
 	up_read(&mm->mmap_sem);
-	if (is_global_init(tsk)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
 	if (is_kernel_mode)
 		goto no_context;
 	pagefault_out_of_memory();
@@ -722,8 +704,60 @@ void do_page_fault(struct pt_regs *regs, int fault_num,
 {
 	int is_page_fault;
 
+#ifdef CONFIG_KPROBES
+	/*
+	 * This is to notify the fault handler of the kprobes.  The
+	 * exception code is redundant as it is also carried in REGS,
+	 * but we pass it anyhow.
+	 */
+	if (notify_die(DIE_PAGE_FAULT, "page fault", regs, -1,
+		       regs->faultnum, SIGSEGV) == NOTIFY_STOP)
+		return;
+#endif
+
+#ifdef __tilegx__
+	/*
+	 * We don't need early do_page_fault_ics() support, since unlike
+	 * Pro we don't need to worry about unlocking the atomic locks.
+	 * There is only one current case in GX where we touch any memory
+	 * under ICS other than our own kernel stack, and we handle that
+	 * here.  (If we crash due to trying to touch our own stack,
+	 * we're in too much trouble for C code to help out anyway.)
+	 */
+	if (write & ~1) {
+		unsigned long pc = write & ~1;
+		if (pc >= (unsigned long) __start_unalign_asm_code &&
+		    pc < (unsigned long) __end_unalign_asm_code) {
+			struct thread_info *ti = current_thread_info();
+			/*
+			 * Our EX_CONTEXT is still what it was from the
+			 * initial unalign exception, but now we've faulted
+			 * on the JIT page.  We would like to complete the
+			 * page fault however is appropriate, and then retry
+			 * the instruction that caused the unalign exception.
+			 * Our state has been "corrupted" by setting the low
+			 * bit in "sp", and stashing r0..r3 in the
+			 * thread_info area, so we revert all of that, then
+			 * continue as if this were a normal page fault.
+			 */
+			regs->sp &= ~1UL;
+			regs->regs[0] = ti->unalign_jit_tmp[0];
+			regs->regs[1] = ti->unalign_jit_tmp[1];
+			regs->regs[2] = ti->unalign_jit_tmp[2];
+			regs->regs[3] = ti->unalign_jit_tmp[3];
+			write &= 1;
+		} else {
+			pr_alert("%s/%d: ICS set at page fault at %#lx: %#lx\n",
+				 current->comm, current->pid, pc, address);
+			show_regs(regs);
+			do_group_exit(SIGKILL);
+			return;
+		}
+	}
+#else
 	/* This case should have been handled by do_page_fault_ics(). */
 	BUG_ON(write & ~1);
+#endif
 
 #if CHIP_HAS_TILE_DMA()
 	/*
@@ -752,10 +786,6 @@ void do_page_fault(struct pt_regs *regs, int fault_num,
 	case INT_DMATLB_MISS:
 	case INT_DMATLB_MISS_DWNCL:
 #endif
-#if CHIP_HAS_SN_PROC()
-	case INT_SNITLB_MISS:
-	case INT_SNITLB_MISS_DWNCL:
-#endif
 		is_page_fault = 1;
 		break;
 
@@ -771,8 +801,8 @@ void do_page_fault(struct pt_regs *regs, int fault_num,
 		panic("Bad fault number %d in do_page_fault", fault_num);
 	}
 
-#if CHIP_HAS_TILE_DMA() || CHIP_HAS_SN_PROC()
-	if (EX1_PL(regs->ex1) != USER_PL) {
+#if CHIP_HAS_TILE_DMA()
+	if (!user_mode(regs)) {
 		struct async_tlb *async;
 		switch (fault_num) {
 #if CHIP_HAS_TILE_DMA()
@@ -783,12 +813,6 @@ void do_page_fault(struct pt_regs *regs, int fault_num,
 			async = &current->thread.dma_async_tlb;
 			break;
 #endif
-#if CHIP_HAS_SN_PROC()
-		case INT_SNITLB_MISS:
-		case INT_SNITLB_MISS_DWNCL:
-			async = &current->thread.sn_async_tlb;
-			break;
-#endif
 		default:
 			async = NULL;
 		}
@@ -821,14 +845,22 @@ void do_page_fault(struct pt_regs *regs, int fault_num,
 }
 
 
-#if CHIP_HAS_TILE_DMA() || CHIP_HAS_SN_PROC()
+#if CHIP_HAS_TILE_DMA()
 /*
- * Check an async_tlb structure to see if a deferred fault is waiting,
- * and if so pass it to the page-fault code.
+ * This routine effectively re-issues asynchronous page faults
+ * when we are returning to user space.
  */
-static void handle_async_page_fault(struct pt_regs *regs,
-				    struct async_tlb *async)
+void do_async_page_fault(struct pt_regs *regs)
 {
+	struct async_tlb *async = &current->thread.dma_async_tlb;
+
+	/*
+	 * Clear thread flag early.  If we re-interrupt while processing
+	 * code here, we will reset it and recall this routine before
+	 * returning to user space.
+	 */
+	clear_thread_flag(TIF_ASYNC_TLB);
+
 	if (async->fault_num) {
 		/*
 		 * Clear async->fault_num before calling the page-fault
@@ -842,35 +874,15 @@ static void handle_async_page_fault(struct pt_regs *regs,
 				  async->address, async->is_write);
 	}
 }
-
-/*
- * This routine effectively re-issues asynchronous page faults
- * when we are returning to user space.
- */
-void do_async_page_fault(struct pt_regs *regs)
-{
-	/*
-	 * Clear thread flag early.  If we re-interrupt while processing
-	 * code here, we will reset it and recall this routine before
-	 * returning to user space.
-	 */
-	clear_thread_flag(TIF_ASYNC_TLB);
-
-#if CHIP_HAS_TILE_DMA()
-	handle_async_page_fault(regs, &current->thread.dma_async_tlb);
-#endif
-#if CHIP_HAS_SN_PROC()
-	handle_async_page_fault(regs, &current->thread.sn_async_tlb);
-#endif
-}
-#endif /* CHIP_HAS_TILE_DMA() || CHIP_HAS_SN_PROC() */
+#endif /* CHIP_HAS_TILE_DMA() */
 
 
 void vmalloc_sync_all(void)
 {
 #ifdef __tilegx__
 	/* Currently all L1 kernel pmd's are static and shared. */
-	BUG_ON(pgd_index(VMALLOC_END) != pgd_index(VMALLOC_START));
+	BUILD_BUG_ON(pgd_index(VMALLOC_END - PAGE_SIZE) !=
+		     pgd_index(VMALLOC_START));
 #else
 	/*
 	 * Note that races in the updates of insync and start aren't
diff --git a/arch/tile/mm/highmem.c b/arch/tile/mm/highmem.c
index 347d123..0dc2182 100644
--- a/arch/tile/mm/highmem.c
+++ b/arch/tile/mm/highmem.c
@@ -114,7 +114,6 @@ static void kmap_atomic_register(struct page *page, int type,
 
 	list_add(&amp->list, &amp_list);
 	set_pte(ptep, pteval);
-	arch_flush_lazy_mmu_mode();
 
 	spin_unlock(&amp_lock);
 	homecache_kpte_unlock(flags);
@@ -259,7 +258,6 @@ void __kunmap_atomic(void *kvaddr)
 		BUG_ON(vaddr >= (unsigned long)high_memory);
 	}
 
-	arch_flush_lazy_mmu_mode();
 	pagefault_enable();
 }
 EXPORT_SYMBOL(__kunmap_atomic);
diff --git a/arch/tile/mm/homecache.c b/arch/tile/mm/homecache.c
index 1ae9119..004ba56 100644
--- a/arch/tile/mm/homecache.c
+++ b/arch/tile/mm/homecache.c
@@ -43,12 +43,9 @@
 #include "migrate.h"
 
 
-#if CHIP_HAS_COHERENT_LOCAL_CACHE()
-
 /*
  * The noallocl2 option suppresses all use of the L2 cache to cache
- * locally from a remote home.  There's no point in using it if we
- * don't have coherent local caching, though.
+ * locally from a remote home.
  */
 static int __write_once noallocl2;
 static int __init set_noallocl2(char *str)
@@ -58,12 +55,6 @@ static int __init set_noallocl2(char *str)
 }
 early_param("noallocl2", set_noallocl2);
 
-#else
-
-#define noallocl2 0
-
-#endif
-
 
 /*
  * Update the irq_stat for cpus that we are going to interrupt
@@ -172,7 +163,8 @@ void flush_remote(unsigned long cache_pfn, unsigned long cache_control,
 
 static void homecache_finv_page_va(void* va, int home)
 {
-	if (home == smp_processor_id()) {
+	int cpu = get_cpu();
+	if (home == cpu) {
 		finv_buffer_local(va, PAGE_SIZE);
 	} else if (home == PAGE_HOME_HASH) {
 		finv_buffer_remote(va, PAGE_SIZE, 1);
@@ -180,6 +172,7 @@ static void homecache_finv_page_va(void* va, int home)
 		BUG_ON(home < 0 || home >= NR_CPUS);
 		finv_buffer_remote(va, PAGE_SIZE, 0);
 	}
+	put_cpu();
 }
 
 void homecache_finv_map_page(struct page *page, int home)
@@ -198,7 +191,7 @@ void homecache_finv_map_page(struct page *page, int home)
 #else
 	va = __fix_to_virt(FIX_HOMECACHE_BEGIN + smp_processor_id());
 #endif
-	ptep = virt_to_pte(NULL, (unsigned long)va);
+	ptep = virt_to_kpte(va);
 	pte = pfn_pte(page_to_pfn(page), PAGE_KERNEL);
 	__set_pte(ptep, pte_set_home(pte, home));
 	homecache_finv_page_va((void *)va, home);
@@ -263,10 +256,8 @@ static int pte_to_home(pte_t pte)
 		return PAGE_HOME_INCOHERENT;
 	case HV_PTE_MODE_UNCACHED:
 		return PAGE_HOME_UNCACHED;
-#if CHIP_HAS_CBOX_HOME_MAP()
 	case HV_PTE_MODE_CACHE_HASH_L3:
 		return PAGE_HOME_HASH;
-#endif
 	}
 	panic("Bad PTE %#llx\n", pte.val);
 }
@@ -323,20 +314,16 @@ pte_t pte_set_home(pte_t pte, int home)
 						      HV_PTE_MODE_CACHE_NO_L3);
 			}
 		} else
-#if CHIP_HAS_CBOX_HOME_MAP()
 		if (hash_default)
 			pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_HASH_L3);
 		else
-#endif
 			pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_NO_L3);
 		pte = hv_pte_set_nc(pte);
 		break;
 
-#if CHIP_HAS_CBOX_HOME_MAP()
 	case PAGE_HOME_HASH:
 		pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_HASH_L3);
 		break;
-#endif
 
 	default:
 		BUG_ON(home < 0 || home >= NR_CPUS ||
@@ -346,7 +333,6 @@ pte_t pte_set_home(pte_t pte, int home)
 		break;
 	}
 
-#if CHIP_HAS_NC_AND_NOALLOC_BITS()
 	if (noallocl2)
 		pte = hv_pte_set_no_alloc_l2(pte);
 
@@ -355,7 +341,6 @@ pte_t pte_set_home(pte_t pte, int home)
 	    hv_pte_get_mode(pte) == HV_PTE_MODE_CACHE_NO_L3) {
 		pte = hv_pte_set_mode(pte, HV_PTE_MODE_UNCACHED);
 	}
-#endif
 
 	/* Checking this case here gives a better panic than from the hv. */
 	BUG_ON(hv_pte_get_mode(pte) == 0);
@@ -371,19 +356,13 @@ EXPORT_SYMBOL(pte_set_home);
  * so they're not suitable for anything but infrequent use.
  */
 
-#if CHIP_HAS_CBOX_HOME_MAP()
-static inline int initial_page_home(void) { return PAGE_HOME_HASH; }
-#else
-static inline int initial_page_home(void) { return 0; }
-#endif
-
 int page_home(struct page *page)
 {
 	if (PageHighMem(page)) {
-		return initial_page_home();
+		return PAGE_HOME_HASH;
 	} else {
 		unsigned long kva = (unsigned long)page_address(page);
-		return pte_to_home(*virt_to_pte(NULL, kva));
+		return pte_to_home(*virt_to_kpte(kva));
 	}
 }
 EXPORT_SYMBOL(page_home);
@@ -402,7 +381,7 @@ void homecache_change_page_home(struct page *page, int order, int home)
 		     NULL, 0);
 
 	for (i = 0; i < pages; ++i, kva += PAGE_SIZE) {
-		pte_t *ptep = virt_to_pte(NULL, kva);
+		pte_t *ptep = virt_to_kpte(kva);
 		pte_t pteval = *ptep;
 		BUG_ON(!pte_present(pteval) || pte_huge(pteval));
 		__set_pte(ptep, pte_set_home(pteval, home));
@@ -436,7 +415,7 @@ struct page *homecache_alloc_pages_node(int nid, gfp_t gfp_mask,
 void __homecache_free_pages(struct page *page, unsigned int order)
 {
 	if (put_page_testzero(page)) {
-		homecache_change_page_home(page, order, initial_page_home());
+		homecache_change_page_home(page, order, PAGE_HOME_HASH);
 		if (order == 0) {
 			free_hot_cold_page(page, 0);
 		} else {
diff --git a/arch/tile/mm/hugetlbpage.c b/arch/tile/mm/hugetlbpage.c
index 650ccff..0cb3bba 100644
--- a/arch/tile/mm/hugetlbpage.c
+++ b/arch/tile/mm/hugetlbpage.c
@@ -49,38 +49,6 @@ int huge_shift[HUGE_SHIFT_ENTRIES] = {
 #endif
 };
 
-/*
- * This routine is a hybrid of pte_alloc_map() and pte_alloc_kernel().
- * It assumes that L2 PTEs are never in HIGHMEM (we don't support that).
- * It locks the user pagetable, and bumps up the mm->nr_ptes field,
- * but otherwise allocate the page table using the kernel versions.
- */
-static pte_t *pte_alloc_hugetlb(struct mm_struct *mm, pmd_t *pmd,
-				unsigned long address)
-{
-	pte_t *new;
-
-	if (pmd_none(*pmd)) {
-		new = pte_alloc_one_kernel(mm, address);
-		if (!new)
-			return NULL;
-
-		smp_wmb(); /* See comment in __pte_alloc */
-
-		spin_lock(&mm->page_table_lock);
-		if (likely(pmd_none(*pmd))) {  /* Has another populated it ? */
-			mm->nr_ptes++;
-			pmd_populate_kernel(mm, pmd, new);
-			new = NULL;
-		} else
-			VM_BUG_ON(pmd_trans_splitting(*pmd));
-		spin_unlock(&mm->page_table_lock);
-		if (new)
-			pte_free_kernel(mm, new);
-	}
-
-	return pte_offset_kernel(pmd, address);
-}
 #endif
 
 pte_t *huge_pte_alloc(struct mm_struct *mm,
@@ -109,7 +77,7 @@ pte_t *huge_pte_alloc(struct mm_struct *mm,
 		else {
 			if (sz != PAGE_SIZE << huge_shift[HUGE_SHIFT_PAGE])
 				panic("Unexpected page size %#lx\n", sz);
-			return pte_alloc_hugetlb(mm, pmd, addr);
+			return pte_alloc_map(mm, NULL, pmd, addr);
 		}
 	}
 #else
@@ -144,14 +112,14 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 
 	/* Get the top-level page table entry. */
 	pgd = (pgd_t *)get_pte((pte_t *)mm->pgd, pgd_index(addr), 0);
-	if (!pgd_present(*pgd))
-		return NULL;
 
 	/* We don't have four levels. */
 	pud = pud_offset(pgd, addr);
 #ifndef __PAGETABLE_PUD_FOLDED
 # error support fourth page table level
 #endif
+	if (!pud_present(*pud))
+		return NULL;
 
 	/* Check for an L0 huge PTE, if we have three levels. */
 #ifndef __PAGETABLE_PMD_FOLDED
@@ -198,6 +166,11 @@ int pud_huge(pud_t pud)
 	return !!(pud_val(pud) & _PAGE_HUGE_PAGE);
 }
 
+int pmd_huge_support(void)
+{
+	return 1;
+}
+
 struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 			     pmd_t *pmd, int write)
 {
diff --git a/arch/tile/mm/init.c b/arch/tile/mm/init.c
index e182958..0fa1acf 100644
--- a/arch/tile/mm/init.c
+++ b/arch/tile/mm/init.c
@@ -106,10 +106,8 @@ pte_t *get_prealloc_pte(unsigned long pfn)
  */
 static int initial_heap_home(void)
 {
-#if CHIP_HAS_CBOX_HOME_MAP()
 	if (hash_default)
 		return PAGE_HOME_HASH;
-#endif
 	return smp_processor_id();
 }
 
@@ -190,14 +188,11 @@ static void __init page_table_range_init(unsigned long start,
 }
 
 
-#if CHIP_HAS_CBOX_HOME_MAP()
-
 static int __initdata ktext_hash = 1;  /* .text pages */
 static int __initdata kdata_hash = 1;  /* .data and .bss pages */
 int __write_once hash_default = 1;     /* kernel allocator pages */
 EXPORT_SYMBOL(hash_default);
 int __write_once kstack_hash = 1;      /* if no homecaching, use h4h */
-#endif /* CHIP_HAS_CBOX_HOME_MAP */
 
 /*
  * CPUs to use to for striping the pages of kernel data.  If hash-for-home
@@ -215,14 +210,12 @@ int __write_once kdata_huge;       /* if no homecaching, small pages */
 static pgprot_t __init construct_pgprot(pgprot_t prot, int home)
 {
 	prot = pte_set_home(prot, home);
-#if CHIP_HAS_CBOX_HOME_MAP()
 	if (home == PAGE_HOME_IMMUTABLE) {
 		if (ktext_hash)
 			prot = hv_pte_set_mode(prot, HV_PTE_MODE_CACHE_HASH_L3);
 		else
 			prot = hv_pte_set_mode(prot, HV_PTE_MODE_CACHE_NO_L3);
 	}
-#endif
 	return prot;
 }
 
@@ -234,22 +227,17 @@ static pgprot_t __init init_pgprot(ulong address)
 {
 	int cpu;
 	unsigned long page;
-	enum { CODE_DELTA = MEM_SV_INTRPT - PAGE_OFFSET };
+	enum { CODE_DELTA = MEM_SV_START - PAGE_OFFSET };
 
-#if CHIP_HAS_CBOX_HOME_MAP()
 	/* For kdata=huge, everything is just hash-for-home. */
 	if (kdata_huge)
 		return construct_pgprot(PAGE_KERNEL, PAGE_HOME_HASH);
-#endif
 
 	/* We map the aliased pages of permanent text inaccessible. */
 	if (address < (ulong) _sinittext - CODE_DELTA)
 		return PAGE_NONE;
 
-	/*
-	 * We map read-only data non-coherent for performance.  We could
-	 * use neighborhood caching on TILE64, but it's not clear it's a win.
-	 */
+	/* We map read-only data non-coherent for performance. */
 	if ((address >= (ulong) __start_rodata &&
 	     address < (ulong) __end_rodata) ||
 	    address == (ulong) empty_zero_page) {
@@ -257,12 +245,10 @@ static pgprot_t __init init_pgprot(ulong address)
 	}
 
 #ifndef __tilegx__
-#if !ATOMIC_LOCKS_FOUND_VIA_TABLE()
 	/* Force the atomic_locks[] array page to be hash-for-home. */
 	if (address == (ulong) atomic_locks)
 		return construct_pgprot(PAGE_KERNEL, PAGE_HOME_HASH);
 #endif
-#endif
 
 	/*
 	 * Everything else that isn't data or bss is heap, so mark it
@@ -280,19 +266,9 @@ static pgprot_t __init init_pgprot(ulong address)
 	if (address >= (ulong) _end || address < (ulong) _einitdata)
 		return construct_pgprot(PAGE_KERNEL, initial_heap_home());
 
-#if CHIP_HAS_CBOX_HOME_MAP()
 	/* Use hash-for-home if requested for data/bss. */
 	if (kdata_hash)
 		return construct_pgprot(PAGE_KERNEL, PAGE_HOME_HASH);
-#endif
-
-	/*
-	 * Make the w1data homed like heap to start with, to avoid
-	 * making it part of the page-striped data area when we're just
-	 * going to convert it to read-only soon anyway.
-	 */
-	if (address >= (ulong)__w1data_begin && address < (ulong)__w1data_end)
-		return construct_pgprot(PAGE_KERNEL, initial_heap_home());
 
 	/*
 	 * Otherwise we just hand out consecutive cpus.  To avoid
@@ -301,7 +277,7 @@ static pgprot_t __init init_pgprot(ulong address)
 	 * the requested address, while walking cpu home around kdata_mask.
 	 * This is typically no more than a dozen or so iterations.
 	 */
-	page = (((ulong)__w1data_end) + PAGE_SIZE - 1) & PAGE_MASK;
+	page = (((ulong)__end_rodata) + PAGE_SIZE - 1) & PAGE_MASK;
 	BUG_ON(address < page || address >= (ulong)_end);
 	cpu = cpumask_first(&kdata_mask);
 	for (; page < address; page += PAGE_SIZE) {
@@ -311,11 +287,9 @@ static pgprot_t __init init_pgprot(ulong address)
 		if (page == (ulong)empty_zero_page)
 			continue;
 #ifndef __tilegx__
-#if !ATOMIC_LOCKS_FOUND_VIA_TABLE()
 		if (page == (ulong)atomic_locks)
 			continue;
 #endif
-#endif
 		cpu = cpumask_next(cpu, &kdata_mask);
 		if (cpu == NR_CPUS)
 			cpu = cpumask_first(&kdata_mask);
@@ -358,7 +332,7 @@ static int __init setup_ktext(char *str)
 
 	ktext_arg_seen = 1;
 
-	/* Default setting on Tile64: use a huge page */
+	/* Default setting: use a huge page */
 	if (strcmp(str, "huge") == 0)
 		pr_info("ktext: using one huge locally cached page\n");
 
@@ -404,10 +378,8 @@ static inline pgprot_t ktext_set_nocache(pgprot_t prot)
 {
 	if (!ktext_nocache)
 		prot = hv_pte_set_nc(prot);
-#if CHIP_HAS_NC_AND_NOALLOC_BITS()
 	else
 		prot = hv_pte_set_no_alloc_l2(prot);
-#endif
 	return prot;
 }
 
@@ -440,7 +412,6 @@ static void __init kernel_physical_mapping_init(pgd_t *pgd_base)
 	struct cpumask kstripe_mask;
 	int rc, i;
 
-#if CHIP_HAS_CBOX_HOME_MAP()
 	if (ktext_arg_seen && ktext_hash) {
 		pr_warning("warning: \"ktext\" boot argument ignored"
 			   " if \"kcache_hash\" sets up text hash-for-home\n");
@@ -457,7 +428,6 @@ static void __init kernel_physical_mapping_init(pgd_t *pgd_base)
 			  " kcache_hash=all or =allbutstack\n");
 		kdata_huge = 0;
 	}
-#endif
 
 	/*
 	 * Set up a mask for cpus to use for kernel striping.
@@ -538,7 +508,7 @@ static void __init kernel_physical_mapping_init(pgd_t *pgd_base)
 		}
 	}
 
-	address = MEM_SV_INTRPT;
+	address = MEM_SV_START;
 	pmd = get_pmd(pgtables, address);
 	pfn = 0;  /* code starts at PA 0 */
 	if (ktext_small) {
@@ -585,13 +555,11 @@ static void __init kernel_physical_mapping_init(pgd_t *pgd_base)
 	} else {
 		pte_t pteval = pfn_pte(0, PAGE_KERNEL_EXEC);
 		pteval = pte_mkhuge(pteval);
-#if CHIP_HAS_CBOX_HOME_MAP()
 		if (ktext_hash) {
 			pteval = hv_pte_set_mode(pteval,
 						 HV_PTE_MODE_CACHE_HASH_L3);
 			pteval = ktext_set_nocache(pteval);
 		} else
-#endif /* CHIP_HAS_CBOX_HOME_MAP() */
 		if (cpumask_weight(&ktext_mask) == 1) {
 			pteval = set_remote_cache_cpu(pteval,
 					      cpumask_first(&ktext_mask));
@@ -777,10 +745,7 @@ void __init paging_init(void)
 
 	kernel_physical_mapping_init(pgd_base);
 
-	/*
-	 * Fixed mappings, only the page table structure has to be
-	 * created - mappings will be set by set_fixmap():
-	 */
+	/* Fixed mappings, only the page table structure has to be created. */
 	page_table_range_init(fix_to_virt(__end_of_fixed_addresses - 1),
 			      FIXADDR_TOP, pgd_base);
 
@@ -863,10 +828,6 @@ void __init mem_init(void)
 	printk(KERN_DEBUG "  PKMAP   %#lx - %#lx\n",
 	       PKMAP_BASE, PKMAP_ADDR(LAST_PKMAP) - 1);
 #endif
-#ifdef CONFIG_HUGEVMAP
-	printk(KERN_DEBUG "  HUGEMAP %#lx - %#lx\n",
-	       HUGE_VMAP_BASE, HUGE_VMAP_END - 1);
-#endif
 	printk(KERN_DEBUG "  VMALLOC %#lx - %#lx\n",
 	       _VMALLOC_START, _VMALLOC_END - 1);
 #ifdef __tilegx__
@@ -941,26 +902,6 @@ void __init pgtable_cache_init(void)
 		panic("pgtable_cache_init(): Cannot create pgd cache");
 }
 
-#if !CHIP_HAS_COHERENT_LOCAL_CACHE()
-/*
- * The __w1data area holds data that is only written during initialization,
- * and is read-only and thus freely cacheable thereafter.  Fix the page
- * table entries that cover that region accordingly.
- */
-static void mark_w1data_ro(void)
-{
-	/* Loop over page table entries */
-	unsigned long addr = (unsigned long)__w1data_begin;
-	BUG_ON((addr & (PAGE_SIZE-1)) != 0);
-	for (; addr <= (unsigned long)__w1data_end - 1; addr += PAGE_SIZE) {
-		unsigned long pfn = kaddr_to_pfn((void *)addr);
-		pte_t *ptep = virt_to_pte(NULL, addr);
-		BUG_ON(pte_huge(*ptep));   /* not relevant for kdata_huge */
-		set_pte_at(&init_mm, addr, ptep, pfn_pte(pfn, PAGE_KERNEL_RO));
-	}
-}
-#endif
-
 #ifdef CONFIG_DEBUG_PAGEALLOC
 static long __write_once initfree;
 #else
@@ -1000,7 +941,7 @@ static void free_init_pages(char *what, unsigned long begin, unsigned long end)
 		 */
 		int pfn = kaddr_to_pfn((void *)addr);
 		struct page *page = pfn_to_page(pfn);
-		pte_t *ptep = virt_to_pte(NULL, addr);
+		pte_t *ptep = virt_to_kpte(addr);
 		if (!initfree) {
 			/*
 			 * If debugging page accesses then do not free
@@ -1024,15 +965,11 @@ static void free_init_pages(char *what, unsigned long begin, unsigned long end)
 
 void free_initmem(void)
 {
-	const unsigned long text_delta = MEM_SV_INTRPT - PAGE_OFFSET;
+	const unsigned long text_delta = MEM_SV_START - PAGE_OFFSET;
 
 	/*
-	 * Evict the dirty initdata on the boot cpu, evict the w1data
-	 * wherever it's homed, and evict all the init code everywhere.
-	 * We are guaranteed that no one will touch the init pages any
-	 * more, and although other cpus may be touching the w1data,
-	 * we only actually change the caching on tile64, which won't
-	 * be keeping local copies in the other tiles' caches anyway.
+	 * Evict the cache on all cores to avoid incoherence.
+	 * We are guaranteed that no one will touch the init pages any more.
 	 */
 	homecache_evict(&cpu_cacheable_map);
 
@@ -1043,26 +980,11 @@ void free_initmem(void)
 
 	/*
 	 * Free the pages mapped from 0xc0000000 that correspond to code
-	 * pages from MEM_SV_INTRPT that we won't use again after init.
+	 * pages from MEM_SV_START that we won't use again after init.
 	 */
 	free_init_pages("unused kernel text",
 			(unsigned long)_sinittext - text_delta,
 			(unsigned long)_einittext - text_delta);
-
-#if !CHIP_HAS_COHERENT_LOCAL_CACHE()
-	/*
-	 * Upgrade the .w1data section to globally cached.
-	 * We don't do this on tilepro, since the cache architecture
-	 * pretty much makes it irrelevant, and in any case we end
-	 * up having racing issues with other tiles that may touch
-	 * the data after we flush the cache but before we update
-	 * the PTEs and flush the TLBs, causing sharer shootdowns
-	 * later.  Even though this is to clean data, it seems like
-	 * an unnecessary complication.
-	 */
-	mark_w1data_ro();
-#endif
-
 	/* Do a global TLB flush so everyone sees the changes. */
 	flush_tlb_all();
 }
diff --git a/arch/tile/mm/migrate_32.S b/arch/tile/mm/migrate_32.S
index 5305814..7720854 100644
--- a/arch/tile/mm/migrate_32.S
+++ b/arch/tile/mm/migrate_32.S
@@ -136,7 +136,7 @@ STD_ENTRY(flush_and_install_context)
 	 move r8, zero  /* asids */
 	 move r9, zero  /* asidcount */
 	}
-	jal hv_flush_remote
+	jal _hv_flush_remote
 	bnz r0, .Ldone
 
 	/* Now install the new page table. */
@@ -152,7 +152,7 @@ STD_ENTRY(flush_and_install_context)
 	 move r4, r_asid
 	 moveli r5, HV_CTX_DIRECTIO | CTX_PAGE_FLAG
 	}
-	jal hv_install_context
+	jal _hv_install_context
 	bnz r0, .Ldone
 
 	/* Finally, flush the TLB. */
diff --git a/arch/tile/mm/migrate_64.S b/arch/tile/mm/migrate_64.S
index 1d15b108..a49eee3 100644
--- a/arch/tile/mm/migrate_64.S
+++ b/arch/tile/mm/migrate_64.S
@@ -123,7 +123,7 @@ STD_ENTRY(flush_and_install_context)
 	}
 	{
 	 move r8, zero  /* asidcount */
-	 jal hv_flush_remote
+	 jal _hv_flush_remote
 	}
 	bnez r0, 1f
 
@@ -136,7 +136,7 @@ STD_ENTRY(flush_and_install_context)
 	 move r2, r_asid
 	 moveli r3, HV_CTX_DIRECTIO | CTX_PAGE_FLAG
 	}
-	jal hv_install_context
+	jal _hv_install_context
 	bnez r0, 1f
 
 	/* Finally, flush the TLB. */
diff --git a/arch/tile/mm/mmap.c b/arch/tile/mm/mmap.c
index d67d91e..851a94e 100644
--- a/arch/tile/mm/mmap.c
+++ b/arch/tile/mm/mmap.c
@@ -58,16 +58,36 @@ void arch_pick_mmap_layout(struct mm_struct *mm)
 #else
 	int is_32bit = 0;
 #endif
+	unsigned long random_factor = 0UL;
+
+	/*
+	 *  8 bits of randomness in 32bit mmaps, 24 address space bits
+	 * 12 bits of randomness in 64bit mmaps, 28 address space bits
+	 */
+	if (current->flags & PF_RANDOMIZE) {
+		if (is_32bit)
+			random_factor = get_random_int() % (1<<8);
+		else
+			random_factor = get_random_int() % (1<<12);
+
+		random_factor <<= PAGE_SHIFT;
+	}
 
 	/*
 	 * Use standard layout if the expected stack growth is unlimited
 	 * or we are running native 64 bits.
 	 */
-	if (!is_32bit || rlimit(RLIMIT_STACK) == RLIM_INFINITY) {
-		mm->mmap_base = TASK_UNMAPPED_BASE;
+	if (rlimit(RLIMIT_STACK) == RLIM_INFINITY) {
+		mm->mmap_base = TASK_UNMAPPED_BASE + random_factor;
 		mm->get_unmapped_area = arch_get_unmapped_area;
 	} else {
 		mm->mmap_base = mmap_base(mm);
 		mm->get_unmapped_area = arch_get_unmapped_area_topdown;
 	}
 }
+
+unsigned long arch_randomize_brk(struct mm_struct *mm)
+{
+	unsigned long range_end = mm->brk + 0x02000000;
+	return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
+}
diff --git a/arch/tile/mm/pgtable.c b/arch/tile/mm/pgtable.c
index dfd63ce..4fd9ec0 100644
--- a/arch/tile/mm/pgtable.c
+++ b/arch/tile/mm/pgtable.c
@@ -83,55 +83,6 @@ void show_mem(unsigned int filter)
 	}
 }
 
-/*
- * Associate a virtual page frame with a given physical page frame
- * and protection flags for that frame.
- */
-static void set_pte_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags)
-{
-	pgd_t *pgd;
-	pud_t *pud;
-	pmd_t *pmd;
-	pte_t *pte;
-
-	pgd = swapper_pg_dir + pgd_index(vaddr);
-	if (pgd_none(*pgd)) {
-		BUG();
-		return;
-	}
-	pud = pud_offset(pgd, vaddr);
-	if (pud_none(*pud)) {
-		BUG();
-		return;
-	}
-	pmd = pmd_offset(pud, vaddr);
-	if (pmd_none(*pmd)) {
-		BUG();
-		return;
-	}
-	pte = pte_offset_kernel(pmd, vaddr);
-	/* <pfn,flags> stored as-is, to permit clearing entries */
-	set_pte(pte, pfn_pte(pfn, flags));
-
-	/*
-	 * It's enough to flush this one mapping.
-	 * This appears conservative since it is only called
-	 * from __set_fixmap.
-	 */
-	local_flush_tlb_page(NULL, vaddr, PAGE_SIZE);
-}
-
-void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t flags)
-{
-	unsigned long address = __fix_to_virt(idx);
-
-	if (idx >= __end_of_fixed_addresses) {
-		BUG();
-		return;
-	}
-	set_pte_pfn(address, phys >> PAGE_SHIFT, flags);
-}
-
 /**
  * shatter_huge_page() - ensure a given address is mapped by a small page.
  *
@@ -176,8 +127,7 @@ void shatter_huge_page(unsigned long addr)
 	}
 
 	/* Shatter the huge page into the preallocated L2 page table. */
-	pmd_populate_kernel(&init_mm, pmd,
-			    get_prealloc_pte(pte_pfn(*(pte_t *)pmd)));
+	pmd_populate_kernel(&init_mm, pmd, get_prealloc_pte(pmd_pfn(*pmd)));
 
 #ifdef __PAGETABLE_PMD_FOLDED
 	/* Walk every pgd on the system and update the pmd there. */
@@ -374,6 +324,17 @@ void ptep_set_wrprotect(struct mm_struct *mm,
 
 #endif
 
+/*
+ * Return a pointer to the PTE that corresponds to the given
+ * address in the given page table.  A NULL page table just uses
+ * the standard kernel page table; the preferred API in this case
+ * is virt_to_kpte().
+ *
+ * The returned pointer can point to a huge page in other levels
+ * of the page table than the bottom, if the huge page is present
+ * in the page table.  For bottom-level PTEs, the returned pointer
+ * can point to a PTE that is either present or not.
+ */
 pte_t *virt_to_pte(struct mm_struct* mm, unsigned long addr)
 {
 	pgd_t *pgd;
@@ -387,13 +348,23 @@ pte_t *virt_to_pte(struct mm_struct* mm, unsigned long addr)
 	pud = pud_offset(pgd, addr);
 	if (!pud_present(*pud))
 		return NULL;
+	if (pud_huge_page(*pud))
+		return (pte_t *)pud;
 	pmd = pmd_offset(pud, addr);
-	if (pmd_huge_page(*pmd))
-		return (pte_t *)pmd;
 	if (!pmd_present(*pmd))
 		return NULL;
+	if (pmd_huge_page(*pmd))
+		return (pte_t *)pmd;
 	return pte_offset_kernel(pmd, addr);
 }
+EXPORT_SYMBOL(virt_to_pte);
+
+pte_t *virt_to_kpte(unsigned long kaddr)
+{
+	BUG_ON(kaddr < PAGE_OFFSET);
+	return virt_to_pte(NULL, kaddr);
+}
+EXPORT_SYMBOL(virt_to_kpte);
 
 pgprot_t set_remote_cache_cpu(pgprot_t prot, int cpu)
 {
@@ -568,7 +539,7 @@ void __iomem *ioremap_prot(resource_size_t phys_addr, unsigned long size,
 	addr = area->addr;
 	if (ioremap_page_range((unsigned long)addr, (unsigned long)addr + size,
 			       phys_addr, pgprot)) {
-		remove_vm_area((void *)(PAGE_MASK & (unsigned long) addr));
+		free_vm_area(area);
 		return NULL;
 	}
 	return (__force void __iomem *) (offset + (char *)addr);
diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common
index bceee66..8ddea1f 100644
--- a/arch/um/Kconfig.common
+++ b/arch/um/Kconfig.common
@@ -6,7 +6,6 @@ config DEFCONFIG_LIST
 config UML
 	bool
 	default y
-	select HAVE_GENERIC_HARDIRQS
 	select HAVE_UID16
 	select GENERIC_IRQ_SHOW
 	select GENERIC_CPU_DEVICES
diff --git a/arch/um/defconfig b/arch/um/defconfig
index 08107a7..2665e6b 100644
--- a/arch/um/defconfig
+++ b/arch/um/defconfig
@@ -129,12 +129,10 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_FHANDLE is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-CONFIG_HAVE_GENERIC_HARDIRQS=y
 
 #
 # IRQ subsystem
 #
-CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_SHOW=y
 
 #
diff --git a/arch/um/drivers/ubd.h b/arch/um/drivers/ubd.h
index 3845051..3b48cd2 100644
--- a/arch/um/drivers/ubd.h
+++ b/arch/um/drivers/ubd.h
@@ -7,7 +7,6 @@
 #ifndef __UM_UBD_USER_H
 #define __UM_UBD_USER_H
 
-extern void ignore_sigwinch_sig(void);
 extern int start_io_thread(unsigned long sp, int *fds_out);
 extern int io_thread(void *arg);
 extern int kernel_fd;
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 879990c..3716e69 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -41,7 +41,7 @@
 #include <os.h>
 #include "cow.h"
 
-enum ubd_req { UBD_READ, UBD_WRITE };
+enum ubd_req { UBD_READ, UBD_WRITE, UBD_FLUSH };
 
 struct io_thread_req {
 	struct request *req;
@@ -866,6 +866,7 @@ static int ubd_add(int n, char **error_out)
 		goto out;
 	}
 	ubd_dev->queue->queuedata = ubd_dev;
+	blk_queue_flush(ubd_dev->queue, REQ_FLUSH);
 
 	blk_queue_max_segments(ubd_dev->queue, MAX_SG);
 	err = ubd_disk_register(UBD_MAJOR, ubd_dev->size, n, &ubd_gendisk[n]);
@@ -1239,11 +1240,40 @@ static void prepare_request(struct request *req, struct io_thread_req *io_req,
 }
 
 /* Called with dev->lock held */
+static void prepare_flush_request(struct request *req,
+				  struct io_thread_req *io_req)
+{
+	struct gendisk *disk = req->rq_disk;
+	struct ubd *ubd_dev = disk->private_data;
+
+	io_req->req = req;
+	io_req->fds[0] = (ubd_dev->cow.file != NULL) ? ubd_dev->cow.fd :
+		ubd_dev->fd;
+	io_req->op = UBD_FLUSH;
+}
+
+static bool submit_request(struct io_thread_req *io_req, struct ubd *dev)
+{
+	int n = os_write_file(thread_fd, &io_req,
+			     sizeof(io_req));
+	if (n != sizeof(io_req)) {
+		if (n != -EAGAIN)
+			printk("write to io thread failed, "
+			       "errno = %d\n", -n);
+		else if (list_empty(&dev->restart))
+			list_add(&dev->restart, &restart);
+
+		kfree(io_req);
+		return false;
+	}
+	return true;
+}
+
+/* Called with dev->lock held */
 static void do_ubd_request(struct request_queue *q)
 {
 	struct io_thread_req *io_req;
 	struct request *req;
-	int n;
 
 	while(1){
 		struct ubd *dev = q->queuedata;
@@ -1259,6 +1289,19 @@ static void do_ubd_request(struct request_queue *q)
 		}
 
 		req = dev->request;
+
+		if (req->cmd_flags & REQ_FLUSH) {
+			io_req = kmalloc(sizeof(struct io_thread_req),
+					 GFP_ATOMIC);
+			if (io_req == NULL) {
+				if (list_empty(&dev->restart))
+					list_add(&dev->restart, &restart);
+				return;
+			}
+			prepare_flush_request(req, io_req);
+			submit_request(io_req, dev);
+		}
+
 		while(dev->start_sg < dev->end_sg){
 			struct scatterlist *sg = &dev->sg[dev->start_sg];
 
@@ -1273,17 +1316,8 @@ static void do_ubd_request(struct request_queue *q)
 					(unsigned long long)dev->rq_pos << 9,
 					sg->offset, sg->length, sg_page(sg));
 
-			n = os_write_file(thread_fd, &io_req,
-					  sizeof(struct io_thread_req *));
-			if(n != sizeof(struct io_thread_req *)){
-				if(n != -EAGAIN)
-					printk("write to io thread failed, "
-					       "errno = %d\n", -n);
-				else if(list_empty(&dev->restart))
-					list_add(&dev->restart, &restart);
-				kfree(io_req);
+			if (submit_request(io_req, dev) == false)
 				return;
-			}
 
 			dev->rq_pos += sg->length >> 9;
 			dev->start_sg++;
@@ -1367,6 +1401,17 @@ static void do_io(struct io_thread_req *req)
 	int err;
 	__u64 off;
 
+	if (req->op == UBD_FLUSH) {
+		/* fds[0] is always either the rw image or our cow file */
+		n = os_sync_file(req->fds[0]);
+		if (n != 0) {
+			printk("do_io - sync failed err = %d "
+			       "fd = %d\n", -n, req->fds[0]);
+			req->error = 1;
+		}
+		return;
+	}
+
 	nsectors = req->length / req->sectorsize;
 	start = 0;
 	do {
@@ -1431,7 +1476,8 @@ int io_thread(void *arg)
 	struct io_thread_req *req;
 	int n;
 
-	ignore_sigwinch_sig();
+	os_fix_helper_signals();
+
 	while(1){
 		n = os_read_file(kernel_fd, &req,
 				 sizeof(struct io_thread_req *));
diff --git a/arch/um/drivers/ubd_user.c b/arch/um/drivers/ubd_user.c
index a703e45..e376f9b 100644
--- a/arch/um/drivers/ubd_user.c
+++ b/arch/um/drivers/ubd_user.c
@@ -21,11 +21,6 @@
 #include "ubd.h"
 #include <os.h>
 
-void ignore_sigwinch_sig(void)
-{
-	signal(SIGWINCH, SIG_IGN);
-}
-
 int start_io_thread(unsigned long sp, int *fd_out)
 {
 	int pid, fds[2], err;
diff --git a/arch/um/include/shared/os.h b/arch/um/include/shared/os.h
index 95feaa4..021104d 100644
--- a/arch/um/include/shared/os.h
+++ b/arch/um/include/shared/os.h
@@ -141,6 +141,7 @@ extern int os_seek_file(int fd, unsigned long long offset);
 extern int os_open_file(const char *file, struct openflags flags, int mode);
 extern int os_read_file(int fd, void *buf, int len);
 extern int os_write_file(int fd, const void *buf, int count);
+extern int os_sync_file(int fd);
 extern int os_file_size(const char *file, unsigned long long *size_out);
 extern int os_file_modtime(const char *file, unsigned long *modtime);
 extern int os_pipe(int *fd, int stream, int close_on_exec);
@@ -200,6 +201,7 @@ extern int os_unmap_memory(void *addr, int len);
 extern int os_drop_memory(void *addr, int length);
 extern int can_drop_memory(void);
 extern void os_flush_stdout(void);
+extern int os_mincore(void *addr, unsigned long len);
 
 /* execvp.c */
 extern int execvp_noalloc(char *buf, const char *file, char *const argv[]);
@@ -233,6 +235,7 @@ extern void setup_machinename(char *machine_out);
 extern void setup_hostinfo(char *buf, int len);
 extern void os_dump_core(void) __attribute__ ((noreturn));
 extern void um_early_printk(const char *s, unsigned int n);
+extern void os_fix_helper_signals(void);
 
 /* time.c */
 extern void idle_sleep(unsigned long long nsecs);
diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile
index babe218..d8b78a0 100644
--- a/arch/um/kernel/Makefile
+++ b/arch/um/kernel/Makefile
@@ -13,7 +13,7 @@ clean-files :=
 obj-y = config.o exec.o exitcode.o irq.o ksyms.o mem.o \
 	physmem.o process.o ptrace.o reboot.o sigio.o \
 	signal.o smp.o syscall.o sysrq.o time.o tlb.o trap.o \
-	um_arch.o umid.o skas/
+	um_arch.o umid.o maccess.o skas/
 
 obj-$(CONFIG_BLK_DEV_INITRD) += initrd.o
 obj-$(CONFIG_GPROF)	+= gprof_syms.o
diff --git a/arch/um/kernel/exitcode.c b/arch/um/kernel/exitcode.c
index 829df49..41ebbfe 100644
--- a/arch/um/kernel/exitcode.c
+++ b/arch/um/kernel/exitcode.c
@@ -40,9 +40,11 @@ static ssize_t exitcode_proc_write(struct file *file,
 		const char __user *buffer, size_t count, loff_t *pos)
 {
 	char *end, buf[sizeof("nnnnn\0")];
+	size_t size;
 	int tmp;
 
-	if (copy_from_user(buf, buffer, count))
+	size = min(count, sizeof(buf));
+	if (copy_from_user(buf, buffer, size))
 		return -EFAULT;
 
 	tmp = simple_strtol(buf, &end, 0);
diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c
index 36e12f0..1d8505b 100644
--- a/arch/um/kernel/irq.c
+++ b/arch/um/kernel/irq.c
@@ -337,6 +337,8 @@ static struct irq_chip normal_irq_type = {
 	.irq_disable = dummy,
 	.irq_enable = dummy,
 	.irq_ack = dummy,
+	.irq_mask = dummy,
+	.irq_unmask = dummy,
 };
 
 static struct irq_chip SIGVTALRM_irq_type = {
@@ -344,6 +346,8 @@ static struct irq_chip SIGVTALRM_irq_type = {
 	.irq_disable = dummy,
 	.irq_enable = dummy,
 	.irq_ack = dummy,
+	.irq_mask = dummy,
+	.irq_unmask = dummy,
 };
 
 void __init init_IRQ(void)
diff --git a/arch/um/kernel/maccess.c b/arch/um/kernel/maccess.c
new file mode 100644
index 0000000..1f3d5c4
--- /dev/null
+++ b/arch/um/kernel/maccess.c
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2013 Richard Weinberger <richrd@nod.at>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/uaccess.h>
+#include <linux/kernel.h>
+#include <os.h>
+
+long probe_kernel_read(void *dst, const void *src, size_t size)
+{
+	void *psrc = (void *)rounddown((unsigned long)src, PAGE_SIZE);
+
+	if ((unsigned long)src < PAGE_SIZE || size <= 0)
+		return -EFAULT;
+
+	if (os_mincore(psrc, size + src - psrc) <= 0)
+		return -EFAULT;
+
+	return __probe_kernel_read(dst, src, size);
+}
diff --git a/arch/um/kernel/trap.c b/arch/um/kernel/trap.c
index 089f398..5c3aef7 100644
--- a/arch/um/kernel/trap.c
+++ b/arch/um/kernel/trap.c
@@ -30,8 +30,7 @@ int handle_page_fault(unsigned long address, unsigned long ip,
 	pmd_t *pmd;
 	pte_t *pte;
 	int err = -EFAULT;
-	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
-				 (is_write ? FAULT_FLAG_WRITE : 0);
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
 
 	*code_out = SEGV_MAPERR;
 
@@ -42,6 +41,8 @@ int handle_page_fault(unsigned long address, unsigned long ip,
 	if (in_atomic())
 		goto out_nosemaphore;
 
+	if (is_user)
+		flags |= FAULT_FLAG_USER;
 retry:
 	down_read(&mm->mmap_sem);
 	vma = find_vma(mm, address);
@@ -58,12 +59,15 @@ retry:
 
 good_area:
 	*code_out = SEGV_ACCERR;
-	if (is_write && !(vma->vm_flags & VM_WRITE))
-		goto out;
-
-	/* Don't require VM_READ|VM_EXEC for write faults! */
-	if (!is_write && !(vma->vm_flags & (VM_READ | VM_EXEC)))
-		goto out;
+	if (is_write) {
+		if (!(vma->vm_flags & VM_WRITE))
+			goto out;
+		flags |= FAULT_FLAG_WRITE;
+	} else {
+		/* Don't require VM_READ|VM_EXEC for write faults! */
+		if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
+			goto out;
+	}
 
 	do {
 		int fault;
@@ -124,6 +128,8 @@ out_of_memory:
 	 * (which will retry the fault, or kill us if we got oom-killed).
 	 */
 	up_read(&mm->mmap_sem);
+	if (!is_user)
+		goto out_nosemaphore;
 	pagefault_out_of_memory();
 	return 0;
 }
diff --git a/arch/um/os-Linux/aio.c b/arch/um/os-Linux/aio.c
index 3a6bc2a..014eb35 100644
--- a/arch/um/os-Linux/aio.c
+++ b/arch/um/os-Linux/aio.c
@@ -104,8 +104,7 @@ static int aio_thread(void *arg)
 	struct io_event event;
 	int err, n, reply_fd;
 
-	signal(SIGWINCH, SIG_IGN);
-
+	os_fix_helper_signals();
 	while (1) {
 		n = io_getevents(ctx, 1, 1, &event, NULL);
 		if (n < 0) {
@@ -173,7 +172,7 @@ static int not_aio_thread(void *arg)
 	struct aio_thread_reply reply;
 	int err;
 
-	signal(SIGWINCH, SIG_IGN);
+	os_fix_helper_signals();
 	while (1) {
 		err = read(aio_req_fd_r, &req, sizeof(req));
 		if (err != sizeof(req)) {
diff --git a/arch/um/os-Linux/file.c b/arch/um/os-Linux/file.c
index c17bd6f..07a7501 100644
--- a/arch/um/os-Linux/file.c
+++ b/arch/um/os-Linux/file.c
@@ -266,6 +266,15 @@ int os_write_file(int fd, const void *buf, int len)
 	return n;
 }
 
+int os_sync_file(int fd)
+{
+	int n = fsync(fd);
+
+	if (n < 0)
+		return -errno;
+	return n;
+}
+
 int os_file_size(const char *file, unsigned long long *size_out)
 {
 	struct uml_stat buf;
diff --git a/arch/um/os-Linux/main.c b/arch/um/os-Linux/main.c
index 749c96d..e1704ff 100644
--- a/arch/um/os-Linux/main.c
+++ b/arch/um/os-Linux/main.c
@@ -123,6 +123,8 @@ int __init main(int argc, char **argv, char **envp)
 
 	setup_env_path();
 
+	setsid();
+
 	new_argv = malloc((argc + 1) * sizeof(char *));
 	if (new_argv == NULL) {
 		perror("Mallocing argv");
diff --git a/arch/um/os-Linux/process.c b/arch/um/os-Linux/process.c
index b8f34c9..33496fe 100644
--- a/arch/um/os-Linux/process.c
+++ b/arch/um/os-Linux/process.c
@@ -4,6 +4,7 @@
  */
 
 #include <stdio.h>
+#include <stdlib.h>
 #include <unistd.h>
 #include <errno.h>
 #include <signal.h>
@@ -232,6 +233,57 @@ out:
 	return ok;
 }
 
+static int os_page_mincore(void *addr)
+{
+	char vec[2];
+	int ret;
+
+	ret = mincore(addr, UM_KERN_PAGE_SIZE, vec);
+	if (ret < 0) {
+		if (errno == ENOMEM || errno == EINVAL)
+			return 0;
+		else
+			return -errno;
+	}
+
+	return vec[0] & 1;
+}
+
+int os_mincore(void *addr, unsigned long len)
+{
+	char *vec;
+	int ret, i;
+
+	if (len <= UM_KERN_PAGE_SIZE)
+		return os_page_mincore(addr);
+
+	vec = calloc(1, (len + UM_KERN_PAGE_SIZE - 1) / UM_KERN_PAGE_SIZE);
+	if (!vec)
+		return -ENOMEM;
+
+	ret = mincore(addr, UM_KERN_PAGE_SIZE, vec);
+	if (ret < 0) {
+		if (errno == ENOMEM || errno == EINVAL)
+			ret = 0;
+		else
+			ret = -errno;
+
+		goto out;
+	}
+
+	for (i = 0; i < ((len + UM_KERN_PAGE_SIZE - 1) / UM_KERN_PAGE_SIZE); i++) {
+		if (!(vec[i] & 1)) {
+			ret = 0;
+			goto out;
+		}
+	}
+
+	ret = 1;
+out:
+	free(vec);
+	return ret;
+}
+
 void init_new_thread_signals(void)
 {
 	set_handler(SIGSEGV);
@@ -242,5 +294,4 @@ void init_new_thread_signals(void)
 	signal(SIGHUP, SIG_IGN);
 	set_handler(SIGIO);
 	signal(SIGWINCH, SIG_IGN);
-	signal(SIGTERM, SIG_DFL);
 }
diff --git a/arch/um/os-Linux/sigio.c b/arch/um/os-Linux/sigio.c
index 8b61cc0..46e762f 100644
--- a/arch/um/os-Linux/sigio.c
+++ b/arch/um/os-Linux/sigio.c
@@ -55,7 +55,7 @@ static int write_sigio_thread(void *unused)
 	int i, n, respond_fd;
 	char c;
 
-	signal(SIGWINCH, SIG_IGN);
+	os_fix_helper_signals();
 	fds = &current_poll;
 	while (1) {
 		n = poll(fds->poll, fds->used, -1);
diff --git a/arch/um/os-Linux/util.c b/arch/um/os-Linux/util.c
index 492ef5e..faee55e 100644
--- a/arch/um/os-Linux/util.c
+++ b/arch/um/os-Linux/util.c
@@ -94,6 +94,16 @@ static inline void __attribute__ ((noreturn)) uml_abort(void)
 			exit(127);
 }
 
+/*
+ * UML helper threads must not handle SIGWINCH/INT/TERM
+ */
+void os_fix_helper_signals(void)
+{
+	signal(SIGWINCH, SIG_IGN);
+	signal(SIGINT, SIG_DFL);
+	signal(SIGTERM, SIG_DFL);
+}
+
 void os_dump_core(void)
 {
 	int pid;
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index 41bcc00..82cdd89 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -2,7 +2,6 @@ config UNICORE32
 	def_bool y
 	select HAVE_MEMBLOCK
 	select HAVE_GENERIC_DMA_COHERENT
-	select HAVE_GENERIC_HARDIRQS
 	select HAVE_DMA_ATTRS
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_BZIP2
diff --git a/arch/unicore32/mm/fault.c b/arch/unicore32/mm/fault.c
index f9b5c10..0dc922d 100644
--- a/arch/unicore32/mm/fault.c
+++ b/arch/unicore32/mm/fault.c
@@ -209,8 +209,7 @@ static int do_pf(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	struct task_struct *tsk;
 	struct mm_struct *mm;
 	int fault, sig, code;
-	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
-				 ((!(fsr ^ 0x12)) ? FAULT_FLAG_WRITE : 0);
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
 
 	tsk = current;
 	mm = tsk->mm;
@@ -222,6 +221,11 @@ static int do_pf(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	if (in_atomic() || !mm)
 		goto no_context;
 
+	if (user_mode(regs))
+		flags |= FAULT_FLAG_USER;
+	if (!(fsr ^ 0x12))
+		flags |= FAULT_FLAG_WRITE;
+
 	/*
 	 * As per x86, we may deadlock here.  However, since the kernel only
 	 * validly references user space from well defined areas of the code,
@@ -278,6 +282,13 @@ retry:
 	       (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS))))
 		return 0;
 
+	/*
+	 * If we are in kernel mode at this point, we
+	 * have no context to handle this fault with.
+	 */
+	if (!user_mode(regs))
+		goto no_context;
+
 	if (fault & VM_FAULT_OOM) {
 		/*
 		 * We ran out of memory, call the OOM killer, and return to
@@ -288,13 +299,6 @@ retry:
 		return 0;
 	}
 
-	/*
-	 * If we are in kernel mode at this point, we
-	 * have no context to handle this fault with.
-	 */
-	if (!user_mode(regs))
-		goto no_context;
-
 	if (fault & VM_FAULT_SIGBUS) {
 		/*
 		 * We had some memory, but were unable to
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index b32ebf9..f67e839 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -16,6 +16,7 @@ config X86_64
 	def_bool y
 	depends on 64BIT
 	select X86_DEV_DMA_OPS
+	select ARCH_USE_CMPXCHG_LOCKREF
 
 ### Arch settings
 config X86
@@ -81,8 +82,6 @@ config X86
 	select HAVE_USER_RETURN_NOTIFIER
 	select ARCH_BINFMT_ELF_RANDOMIZE_PIE
 	select HAVE_ARCH_JUMP_LABEL
-	select HAVE_TEXT_POKE_SMP
-	select HAVE_GENERIC_HARDIRQS
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select SPARSE_IRQ
 	select GENERIC_FIND_FIRST_BIT
@@ -482,11 +481,12 @@ config X86_INTEL_LPSS
 	bool "Intel Low Power Subsystem Support"
 	depends on ACPI
 	select COMMON_CLK
+	select PINCTRL
 	---help---
 	  Select to build support for Intel Low Power Subsystem such as
 	  found on Intel Lynxpoint PCH. Selecting this option enables
-	  things like clock tree (common clock framework) which are needed
-	  by the LPSS peripheral drivers.
+	  things like clock tree (common clock framework) and pincontrol
+	  which are needed by the LPSS peripheral drivers.
 
 config X86_RDC321X
 	bool "RDC R-321x SoC"
@@ -632,6 +632,7 @@ config PARAVIRT_DEBUG
 config PARAVIRT_SPINLOCKS
 	bool "Paravirtualization layer for spinlocks"
 	depends on PARAVIRT && SMP
+	select UNINLINE_SPIN_UNLOCK
 	---help---
 	  Paravirtualized spinlocks allow a pvops backend to replace the
 	  spinlock implementation with something virtualization-friendly
@@ -656,6 +657,15 @@ config KVM_GUEST
 	  underlying device model, the host provides the guest with
 	  timing infrastructure such as time of day, and system time
 
+config KVM_DEBUG_FS
+	bool "Enable debug information for KVM Guests in debugfs"
+	depends on KVM_GUEST && DEBUG_FS
+	default n
+	---help---
+	  This option enables collection of various statistics for KVM guest.
+	  Statistics are displayed in debugfs filesystem. Enabling this option
+	  may incur significant overhead.
+
 source "arch/x86/lguest/Kconfig"
 
 config PARAVIRT_TIME_ACCOUNTING
@@ -850,7 +860,7 @@ source "kernel/Kconfig.preempt"
 
 config X86_UP_APIC
 	bool "Local APIC support on uniprocessors"
-	depends on X86_32 && !SMP && !X86_32_NON_STANDARD
+	depends on X86_32 && !SMP && !X86_32_NON_STANDARD && !PCI_MSI
 	---help---
 	  A local APIC (Advanced Programmable Interrupt Controller) is an
 	  integrated interrupt controller in the CPU. If you have a single-CPU
@@ -875,11 +885,11 @@ config X86_UP_IOAPIC
 
 config X86_LOCAL_APIC
 	def_bool y
-	depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC
+	depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC || PCI_MSI
 
 config X86_IO_APIC
 	def_bool y
-	depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_IOAPIC
+	depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_IOAPIC || PCI_MSI
 
 config X86_VISWS_APIC
 	def_bool y
@@ -1023,6 +1033,7 @@ config X86_REBOOTFIXUPS
 
 config MICROCODE
 	tristate "CPU microcode loading support"
+	depends on CPU_SUP_AMD || CPU_SUP_INTEL
 	select FW_LOADER
 	---help---
 
@@ -1344,8 +1355,12 @@ config ARCH_SELECT_MEMORY_MODEL
 	depends on ARCH_SPARSEMEM_ENABLE
 
 config ARCH_MEMORY_PROBE
-	def_bool y
+	bool "Enable sysfs memory/probe interface"
 	depends on X86_64 && MEMORY_HOTPLUG
+	help
+	  This option enables a sysfs memory/probe interface for testing.
+	  See Documentation/memory-hotplug.txt for more information.
+	  If you are unsure how to answer this question, answer N.
 
 config ARCH_PROC_KCORE_TEXT
 	def_bool y
@@ -1627,9 +1642,9 @@ config KEXEC
 
 	  It is an ongoing process to be certain the hardware in a machine
 	  is properly shutdown, so do not be surprised if this code does not
-	  initially work for you.  It may help to enable device hotplugging
-	  support.  As of this writing the exact hardware interface is
-	  strongly in flux, so no good recommendation can be made.
+	  initially work for you.  As of this writing the exact hardware
+	  interface is strongly in flux, so no good recommendation can be
+	  made.
 
 config CRASH_DUMP
 	bool "kernel crash dumps"
@@ -1716,9 +1731,10 @@ config X86_NEED_RELOCS
 	depends on X86_32 && RELOCATABLE
 
 config PHYSICAL_ALIGN
-	hex "Alignment value to which kernel should be aligned" if X86_32
+	hex "Alignment value to which kernel should be aligned"
 	default "0x1000000"
-	range 0x2000 0x1000000
+	range 0x2000 0x1000000 if X86_32
+	range 0x200000 0x1000000 if X86_64
 	---help---
 	  This value puts the alignment restrictions on physical address
 	  where kernel is loaded and run from. Kernel is compiled for an
@@ -1736,6 +1752,9 @@ config PHYSICAL_ALIGN
 	  end result is that kernel runs from a physical address meeting
 	  above alignment restrictions.
 
+	  On 32-bit this value must be a multiple of 0x2000. On 64-bit
+	  this value must be a multiple of 0x200000.
+
 	  Don't change this unless you know what you are doing.
 
 config HOTPLUG_CPU
@@ -2014,7 +2033,6 @@ menu "Bus options (PCI etc.)"
 config PCI
 	bool "PCI support"
 	default y
-	select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC)
 	---help---
 	  Find out whether you have a PCI motherboard. PCI is the name of a
 	  bus system, i.e. the way the CPU talks to the other stuff inside
@@ -2270,6 +2288,32 @@ config RAPIDIO
 
 source "drivers/rapidio/Kconfig"
 
+config X86_SYSFB
+	bool "Mark VGA/VBE/EFI FB as generic system framebuffer"
+	help
+	  Firmwares often provide initial graphics framebuffers so the BIOS,
+	  bootloader or kernel can show basic video-output during boot for
+	  user-guidance and debugging. Historically, x86 used the VESA BIOS
+	  Extensions and EFI-framebuffers for this, which are mostly limited
+	  to x86.
+	  This option, if enabled, marks VGA/VBE/EFI framebuffers as generic
+	  framebuffers so the new generic system-framebuffer drivers can be
+	  used on x86. If the framebuffer is not compatible with the generic
+	  modes, it is adverticed as fallback platform framebuffer so legacy
+	  drivers like efifb, vesafb and uvesafb can pick it up.
+	  If this option is not selected, all system framebuffers are always
+	  marked as fallback platform framebuffers as usual.
+
+	  Note: Legacy fbdev drivers, including vesafb, efifb, uvesafb, will
+	  not be able to pick up generic system framebuffers if this option
+	  is selected. You are highly encouraged to enable simplefb as
+	  replacement if you select this option. simplefb can correctly deal
+	  with generic system framebuffers. But you should still keep vesafb
+	  and others enabled as fallback if a system framebuffer is
+	  incompatible with simplefb.
+
+	  If unsure, say Y.
+
 endmenu
 
 
@@ -2332,10 +2376,6 @@ config HAVE_ATOMIC_IOMAP
 	def_bool y
 	depends on X86_32
 
-config HAVE_TEXT_POKE_SMP
-	bool
-	select STOP_MACHINE if SMP
-
 config X86_DEV_DMA_OPS
 	bool
 	depends on X86_64 || STA2X11
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 07639c6..41250fb 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -16,6 +16,10 @@ endif
 # e.g.: obj-y += foo_$(BITS).o
 export BITS
 
+ifdef CONFIG_X86_NEED_RELOCS
+        LDFLAGS_vmlinux := --emit-relocs
+endif
+
 ifeq ($(CONFIG_X86_32),y)
         BITS := 32
         UTS_MACHINE := i386
@@ -25,10 +29,6 @@ ifeq ($(CONFIG_X86_32),y)
         KBUILD_AFLAGS += $(biarch)
         KBUILD_CFLAGS += $(biarch)
 
-        ifdef CONFIG_RELOCATABLE
-                LDFLAGS_vmlinux := --emit-relocs
-        endif
-
         KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return
 
         # Never want PIC in a 32-bit kernel, prevent breakage with GCC built
diff --git a/arch/x86/boot/boot.h b/arch/x86/boot/boot.h
index 5b75319..ef72bae 100644
--- a/arch/x86/boot/boot.h
+++ b/arch/x86/boot/boot.h
@@ -355,6 +355,7 @@ int strncmp(const char *cs, const char *ct, size_t count);
 size_t strnlen(const char *s, size_t maxlen);
 unsigned int atou(const char *s);
 unsigned long long simple_strtoull(const char *cp, char **endp, unsigned int base);
+size_t strlen(const char *s);
 
 /* tty.c */
 void puts(const char *);
diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index 1e3184f..5d6f6891 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -181,8 +181,9 @@ relocated:
 /*
  * Do the decompression, and jump to the new kernel..
  */
-	leal	z_extract_offset_negative(%ebx), %ebp
 				/* push arguments for decompress_kernel: */
+	pushl	$z_output_len	/* decompressed length */
+	leal	z_extract_offset_negative(%ebx), %ebp
 	pushl	%ebp		/* output address */
 	pushl	$z_input_len	/* input_len */
 	leal	input_data(%ebx), %eax
@@ -191,33 +192,7 @@ relocated:
 	pushl	%eax		/* heap area */
 	pushl	%esi		/* real mode pointer */
 	call	decompress_kernel
-	addl	$20, %esp
-
-#if CONFIG_RELOCATABLE
-/*
- * Find the address of the relocations.
- */
-	leal	z_output_len(%ebp), %edi
-
-/*
- * Calculate the delta between where vmlinux was compiled to run
- * and where it was actually loaded.
- */
-	movl	%ebp, %ebx
-	subl	$LOAD_PHYSICAL_ADDR, %ebx
-	jz	2f	/* Nothing to be done if loaded at compiled addr. */
-/*
- * Process relocations.
- */
-
-1:	subl	$4, %edi
-	movl	(%edi), %ecx
-	testl	%ecx, %ecx
-	jz	2f
-	addl	%ebx, -__PAGE_OFFSET(%ebx, %ecx)
-	jmp	1b
-2:
-#endif
+	addl	$24, %esp
 
 /*
  * Jump to the decompressed kernel.
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 06e71c2..c337422 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -338,6 +338,7 @@ relocated:
 	leaq	input_data(%rip), %rdx  /* input_data */
 	movl	$z_input_len, %ecx	/* input_len */
 	movq	%rbp, %r8		/* output target address */
+	movq	$z_output_len, %r9	/* decompressed length */
 	call	decompress_kernel
 	popq	%rsi
 
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index 0319c88..434f077 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -271,6 +271,79 @@ static void error(char *x)
 		asm("hlt");
 }
 
+#if CONFIG_X86_NEED_RELOCS
+static void handle_relocations(void *output, unsigned long output_len)
+{
+	int *reloc;
+	unsigned long delta, map, ptr;
+	unsigned long min_addr = (unsigned long)output;
+	unsigned long max_addr = min_addr + output_len;
+
+	/*
+	 * Calculate the delta between where vmlinux was linked to load
+	 * and where it was actually loaded.
+	 */
+	delta = min_addr - LOAD_PHYSICAL_ADDR;
+	if (!delta) {
+		debug_putstr("No relocation needed... ");
+		return;
+	}
+	debug_putstr("Performing relocations... ");
+
+	/*
+	 * The kernel contains a table of relocation addresses. Those
+	 * addresses have the final load address of the kernel in virtual
+	 * memory. We are currently working in the self map. So we need to
+	 * create an adjustment for kernel memory addresses to the self map.
+	 * This will involve subtracting out the base address of the kernel.
+	 */
+	map = delta - __START_KERNEL_map;
+
+	/*
+	 * Process relocations: 32 bit relocations first then 64 bit after.
+	 * Two sets of binary relocations are added to the end of the kernel
+	 * before compression. Each relocation table entry is the kernel
+	 * address of the location which needs to be updated stored as a
+	 * 32-bit value which is sign extended to 64 bits.
+	 *
+	 * Format is:
+	 *
+	 * kernel bits...
+	 * 0 - zero terminator for 64 bit relocations
+	 * 64 bit relocation repeated
+	 * 0 - zero terminator for 32 bit relocations
+	 * 32 bit relocation repeated
+	 *
+	 * So we work backwards from the end of the decompressed image.
+	 */
+	for (reloc = output + output_len - sizeof(*reloc); *reloc; reloc--) {
+		int extended = *reloc;
+		extended += map;
+
+		ptr = (unsigned long)extended;
+		if (ptr < min_addr || ptr > max_addr)
+			error("32-bit relocation outside of kernel!\n");
+
+		*(uint32_t *)ptr += delta;
+	}
+#ifdef CONFIG_X86_64
+	for (reloc--; *reloc; reloc--) {
+		long extended = *reloc;
+		extended += map;
+
+		ptr = (unsigned long)extended;
+		if (ptr < min_addr || ptr > max_addr)
+			error("64-bit relocation outside of kernel!\n");
+
+		*(uint64_t *)ptr += delta;
+	}
+#endif
+}
+#else
+static inline void handle_relocations(void *output, unsigned long output_len)
+{ }
+#endif
+
 static void parse_elf(void *output)
 {
 #ifdef CONFIG_X86_64
@@ -325,7 +398,8 @@ static void parse_elf(void *output)
 asmlinkage void decompress_kernel(void *rmode, memptr heap,
 				  unsigned char *input_data,
 				  unsigned long input_len,
-				  unsigned char *output)
+				  unsigned char *output,
+				  unsigned long output_len)
 {
 	real_mode = rmode;
 
@@ -365,6 +439,7 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap,
 	debug_putstr("\nDecompressing Linux... ");
 	decompress(input_data, input_len, NULL, NULL, output, NULL, error);
 	parse_elf(output);
+	handle_relocations(output, output_len);
 	debug_putstr("done.\nBooting the kernel.\n");
 	return;
 }
diff --git a/arch/x86/boot/printf.c b/arch/x86/boot/printf.c
index cdac91c..565083c 100644
--- a/arch/x86/boot/printf.c
+++ b/arch/x86/boot/printf.c
@@ -55,7 +55,7 @@ static char *number(char *str, long num, int base, int size, int precision,
 	locase = (type & SMALL);
 	if (type & LEFT)
 		type &= ~ZEROPAD;
-	if (base < 2 || base > 36)
+	if (base < 2 || base > 16)
 		return NULL;
 	c = (type & ZEROPAD) ? '0' : ' ';
 	sign = 0;
diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile
index 6c63c35..7d6ba9d 100644
--- a/arch/x86/crypto/Makefile
+++ b/arch/x86/crypto/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_CRYPTO_SHA1_SSSE3) += sha1-ssse3.o
 obj-$(CONFIG_CRYPTO_CRC32_PCLMUL) += crc32-pclmul.o
 obj-$(CONFIG_CRYPTO_SHA256_SSSE3) += sha256-ssse3.o
 obj-$(CONFIG_CRYPTO_SHA512_SSSE3) += sha512-ssse3.o
+obj-$(CONFIG_CRYPTO_CRCT10DIF_PCLMUL) += crct10dif-pclmul.o
 
 # These modules require assembler to support AVX.
 ifeq ($(avx_supported),yes)
@@ -81,3 +82,4 @@ crc32c-intel-$(CONFIG_64BIT) += crc32c-pcl-intel-asm_64.o
 crc32-pclmul-y := crc32-pclmul_asm.o crc32-pclmul_glue.o
 sha256-ssse3-y := sha256-ssse3-asm.o sha256-avx-asm.o sha256-avx2-asm.o sha256_ssse3_glue.o
 sha512-ssse3-y := sha512-ssse3-asm.o sha512-avx-asm.o sha512-avx2-asm.o sha512_ssse3_glue.o
+crct10dif-pclmul-y := crct10dif-pcl-asm_64.o crct10dif-pclmul_glue.o
diff --git a/arch/x86/crypto/camellia_glue.c b/arch/x86/crypto/camellia_glue.c
index 5cb86cc..c171dcb 100644
--- a/arch/x86/crypto/camellia_glue.c
+++ b/arch/x86/crypto/camellia_glue.c
@@ -62,7 +62,7 @@ static void camellia_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
 }
 
 /* camellia sboxes */
-const u64 camellia_sp10011110[256] = {
+__visible const u64 camellia_sp10011110[256] = {
 	0x7000007070707000ULL, 0x8200008282828200ULL, 0x2c00002c2c2c2c00ULL,
 	0xec0000ecececec00ULL, 0xb30000b3b3b3b300ULL, 0x2700002727272700ULL,
 	0xc00000c0c0c0c000ULL, 0xe50000e5e5e5e500ULL, 0xe40000e4e4e4e400ULL,
@@ -151,7 +151,7 @@ const u64 camellia_sp10011110[256] = {
 	0x9e00009e9e9e9e00ULL,
 };
 
-const u64 camellia_sp22000222[256] = {
+__visible const u64 camellia_sp22000222[256] = {
 	0xe0e0000000e0e0e0ULL, 0x0505000000050505ULL, 0x5858000000585858ULL,
 	0xd9d9000000d9d9d9ULL, 0x6767000000676767ULL, 0x4e4e0000004e4e4eULL,
 	0x8181000000818181ULL, 0xcbcb000000cbcbcbULL, 0xc9c9000000c9c9c9ULL,
@@ -240,7 +240,7 @@ const u64 camellia_sp22000222[256] = {
 	0x3d3d0000003d3d3dULL,
 };
 
-const u64 camellia_sp03303033[256] = {
+__visible const u64 camellia_sp03303033[256] = {
 	0x0038380038003838ULL, 0x0041410041004141ULL, 0x0016160016001616ULL,
 	0x0076760076007676ULL, 0x00d9d900d900d9d9ULL, 0x0093930093009393ULL,
 	0x0060600060006060ULL, 0x00f2f200f200f2f2ULL, 0x0072720072007272ULL,
@@ -329,7 +329,7 @@ const u64 camellia_sp03303033[256] = {
 	0x004f4f004f004f4fULL,
 };
 
-const u64 camellia_sp00444404[256] = {
+__visible const u64 camellia_sp00444404[256] = {
 	0x0000707070700070ULL, 0x00002c2c2c2c002cULL, 0x0000b3b3b3b300b3ULL,
 	0x0000c0c0c0c000c0ULL, 0x0000e4e4e4e400e4ULL, 0x0000575757570057ULL,
 	0x0000eaeaeaea00eaULL, 0x0000aeaeaeae00aeULL, 0x0000232323230023ULL,
@@ -418,7 +418,7 @@ const u64 camellia_sp00444404[256] = {
 	0x00009e9e9e9e009eULL,
 };
 
-const u64 camellia_sp02220222[256] = {
+__visible const u64 camellia_sp02220222[256] = {
 	0x00e0e0e000e0e0e0ULL, 0x0005050500050505ULL, 0x0058585800585858ULL,
 	0x00d9d9d900d9d9d9ULL, 0x0067676700676767ULL, 0x004e4e4e004e4e4eULL,
 	0x0081818100818181ULL, 0x00cbcbcb00cbcbcbULL, 0x00c9c9c900c9c9c9ULL,
@@ -507,7 +507,7 @@ const u64 camellia_sp02220222[256] = {
 	0x003d3d3d003d3d3dULL,
 };
 
-const u64 camellia_sp30333033[256] = {
+__visible const u64 camellia_sp30333033[256] = {
 	0x3800383838003838ULL, 0x4100414141004141ULL, 0x1600161616001616ULL,
 	0x7600767676007676ULL, 0xd900d9d9d900d9d9ULL, 0x9300939393009393ULL,
 	0x6000606060006060ULL, 0xf200f2f2f200f2f2ULL, 0x7200727272007272ULL,
@@ -596,7 +596,7 @@ const u64 camellia_sp30333033[256] = {
 	0x4f004f4f4f004f4fULL,
 };
 
-const u64 camellia_sp44044404[256] = {
+__visible const u64 camellia_sp44044404[256] = {
 	0x7070007070700070ULL, 0x2c2c002c2c2c002cULL, 0xb3b300b3b3b300b3ULL,
 	0xc0c000c0c0c000c0ULL, 0xe4e400e4e4e400e4ULL, 0x5757005757570057ULL,
 	0xeaea00eaeaea00eaULL, 0xaeae00aeaeae00aeULL, 0x2323002323230023ULL,
@@ -685,7 +685,7 @@ const u64 camellia_sp44044404[256] = {
 	0x9e9e009e9e9e009eULL,
 };
 
-const u64 camellia_sp11101110[256] = {
+__visible const u64 camellia_sp11101110[256] = {
 	0x7070700070707000ULL, 0x8282820082828200ULL, 0x2c2c2c002c2c2c00ULL,
 	0xececec00ececec00ULL, 0xb3b3b300b3b3b300ULL, 0x2727270027272700ULL,
 	0xc0c0c000c0c0c000ULL, 0xe5e5e500e5e5e500ULL, 0xe4e4e400e4e4e400ULL,
@@ -828,8 +828,8 @@ static void camellia_setup_tail(u64 *subkey, u64 *subRL, int max)
 
 	subRL[1] ^= (subRL[1] & ~subRL[9]) << 32;
 	/* modified for FLinv(kl2) */
-	dw = (subRL[1] & subRL[9]) >> 32,
-		subRL[1] ^= rol32(dw, 1);
+	dw = (subRL[1] & subRL[9]) >> 32;
+	subRL[1] ^= rol32(dw, 1);
 
 	/* round 8 */
 	subRL[11] ^= subRL[1];
@@ -840,8 +840,8 @@ static void camellia_setup_tail(u64 *subkey, u64 *subRL, int max)
 
 	subRL[1] ^= (subRL[1] & ~subRL[17]) << 32;
 	/* modified for FLinv(kl4) */
-	dw = (subRL[1] & subRL[17]) >> 32,
-		subRL[1] ^= rol32(dw, 1);
+	dw = (subRL[1] & subRL[17]) >> 32;
+	subRL[1] ^= rol32(dw, 1);
 
 	/* round 14 */
 	subRL[19] ^= subRL[1];
@@ -859,8 +859,8 @@ static void camellia_setup_tail(u64 *subkey, u64 *subRL, int max)
 	} else {
 		subRL[1] ^= (subRL[1] & ~subRL[25]) << 32;
 		/* modified for FLinv(kl6) */
-		dw = (subRL[1] & subRL[25]) >> 32,
-			subRL[1] ^= rol32(dw, 1);
+		dw = (subRL[1] & subRL[25]) >> 32;
+		subRL[1] ^= rol32(dw, 1);
 
 		/* round 20 */
 		subRL[27] ^= subRL[1];
@@ -882,8 +882,8 @@ static void camellia_setup_tail(u64 *subkey, u64 *subRL, int max)
 
 		kw4 ^= (kw4 & ~subRL[24]) << 32;
 		/* modified for FL(kl5) */
-		dw = (kw4 & subRL[24]) >> 32,
-			kw4 ^= rol32(dw, 1);
+		dw = (kw4 & subRL[24]) >> 32;
+		kw4 ^= rol32(dw, 1);
 	}
 
 	/* round 17 */
@@ -895,8 +895,8 @@ static void camellia_setup_tail(u64 *subkey, u64 *subRL, int max)
 
 	kw4 ^= (kw4 & ~subRL[16]) << 32;
 	/* modified for FL(kl3) */
-	dw = (kw4 & subRL[16]) >> 32,
-		kw4 ^= rol32(dw, 1);
+	dw = (kw4 & subRL[16]) >> 32;
+	kw4 ^= rol32(dw, 1);
 
 	/* round 11 */
 	subRL[14] ^= kw4;
@@ -907,8 +907,8 @@ static void camellia_setup_tail(u64 *subkey, u64 *subRL, int max)
 
 	kw4 ^= (kw4 & ~subRL[8]) << 32;
 	/* modified for FL(kl1) */
-	dw = (kw4 & subRL[8]) >> 32,
-		kw4 ^= rol32(dw, 1);
+	dw = (kw4 & subRL[8]) >> 32;
+	kw4 ^= rol32(dw, 1);
 
 	/* round 5 */
 	subRL[6] ^= kw4;
@@ -928,8 +928,8 @@ static void camellia_setup_tail(u64 *subkey, u64 *subRL, int max)
 	SET_SUBKEY_LR(6, subRL[5] ^ subRL[7]);			/* round 5 */
 
 	tl = (subRL[10] >> 32) ^ (subRL[10] & ~subRL[8]);
-	dw = tl & (subRL[8] >> 32),				/* FL(kl1) */
-		tr = subRL[10] ^ rol32(dw, 1);
+	dw = tl & (subRL[8] >> 32);				/* FL(kl1) */
+	tr = subRL[10] ^ rol32(dw, 1);
 	tt = (tr | ((u64)tl << 32));
 
 	SET_SUBKEY_LR(7, subRL[6] ^ tt);			/* round 6 */
@@ -937,8 +937,8 @@ static void camellia_setup_tail(u64 *subkey, u64 *subRL, int max)
 	SET_SUBKEY_LR(9, subRL[9]);				/* FLinv(kl2) */
 
 	tl = (subRL[7] >> 32) ^ (subRL[7] & ~subRL[9]);
-	dw = tl & (subRL[9] >> 32),				/* FLinv(kl2) */
-		tr = subRL[7] ^ rol32(dw, 1);
+	dw = tl & (subRL[9] >> 32);				/* FLinv(kl2) */
+	tr = subRL[7] ^ rol32(dw, 1);
 	tt = (tr | ((u64)tl << 32));
 
 	SET_SUBKEY_LR(10, subRL[11] ^ tt);			/* round 7 */
@@ -948,8 +948,8 @@ static void camellia_setup_tail(u64 *subkey, u64 *subRL, int max)
 	SET_SUBKEY_LR(14, subRL[13] ^ subRL[15]);		/* round 11 */
 
 	tl = (subRL[18] >> 32) ^ (subRL[18] & ~subRL[16]);
-	dw = tl & (subRL[16] >> 32),				/* FL(kl3) */
-		tr = subRL[18] ^ rol32(dw, 1);
+	dw = tl & (subRL[16] >> 32);				/* FL(kl3) */
+	tr = subRL[18] ^ rol32(dw, 1);
 	tt = (tr | ((u64)tl << 32));
 
 	SET_SUBKEY_LR(15, subRL[14] ^ tt);			/* round 12 */
@@ -957,8 +957,8 @@ static void camellia_setup_tail(u64 *subkey, u64 *subRL, int max)
 	SET_SUBKEY_LR(17, subRL[17]);				/* FLinv(kl4) */
 
 	tl = (subRL[15] >> 32) ^ (subRL[15] & ~subRL[17]);
-	dw = tl & (subRL[17] >> 32),				/* FLinv(kl4) */
-		tr = subRL[15] ^ rol32(dw, 1);
+	dw = tl & (subRL[17] >> 32);				/* FLinv(kl4) */
+	tr = subRL[15] ^ rol32(dw, 1);
 	tt = (tr | ((u64)tl << 32));
 
 	SET_SUBKEY_LR(18, subRL[19] ^ tt);			/* round 13 */
@@ -972,8 +972,8 @@ static void camellia_setup_tail(u64 *subkey, u64 *subRL, int max)
 		SET_SUBKEY_LR(24, subRL[24] ^ subRL[23]);	/* kw3 */
 	} else {
 		tl = (subRL[26] >> 32) ^ (subRL[26] & ~subRL[24]);
-		dw = tl & (subRL[24] >> 32),			/* FL(kl5) */
-			tr = subRL[26] ^ rol32(dw, 1);
+		dw = tl & (subRL[24] >> 32);			/* FL(kl5) */
+		tr = subRL[26] ^ rol32(dw, 1);
 		tt = (tr | ((u64)tl << 32));
 
 		SET_SUBKEY_LR(23, subRL[22] ^ tt);		/* round 18 */
@@ -981,8 +981,8 @@ static void camellia_setup_tail(u64 *subkey, u64 *subRL, int max)
 		SET_SUBKEY_LR(25, subRL[25]);			/* FLinv(kl6) */
 
 		tl = (subRL[23] >> 32) ^ (subRL[23] & ~subRL[25]);
-		dw = tl & (subRL[25] >> 32),			/* FLinv(kl6) */
-			tr = subRL[23] ^ rol32(dw, 1);
+		dw = tl & (subRL[25] >> 32);			/* FLinv(kl6) */
+		tr = subRL[23] ^ rol32(dw, 1);
 		tt = (tr | ((u64)tl << 32));
 
 		SET_SUBKEY_LR(26, subRL[27] ^ tt);		/* round 19 */
diff --git a/arch/x86/crypto/crct10dif-pcl-asm_64.S b/arch/x86/crypto/crct10dif-pcl-asm_64.S
new file mode 100644
index 0000000..35e9756
--- /dev/null
+++ b/arch/x86/crypto/crct10dif-pcl-asm_64.S
@@ -0,0 +1,643 @@
+########################################################################
+# Implement fast CRC-T10DIF computation with SSE and PCLMULQDQ instructions
+#
+# Copyright (c) 2013, Intel Corporation
+#
+# Authors:
+#     Erdinc Ozturk <erdinc.ozturk@intel.com>
+#     Vinodh Gopal <vinodh.gopal@intel.com>
+#     James Guilford <james.guilford@intel.com>
+#     Tim Chen <tim.c.chen@linux.intel.com>
+#
+# This software is available to you under a choice of one of two
+# licenses.  You may choose to be licensed under the terms of the GNU
+# General Public License (GPL) Version 2, available from the file
+# COPYING in the main directory of this source tree, or the
+# OpenIB.org BSD license below:
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met:
+#
+# * Redistributions of source code must retain the above copyright
+#   notice, this list of conditions and the following disclaimer.
+#
+# * Redistributions in binary form must reproduce the above copyright
+#   notice, this list of conditions and the following disclaimer in the
+#   documentation and/or other materials provided with the
+#   distribution.
+#
+# * Neither the name of the Intel Corporation nor the names of its
+#   contributors may be used to endorse or promote products derived from
+#   this software without specific prior written permission.
+#
+#
+# THIS SOFTWARE IS PROVIDED BY INTEL CORPORATION ""AS IS"" AND ANY
+# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL CORPORATION OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+# PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+########################################################################
+#       Function API:
+#       UINT16 crc_t10dif_pcl(
+#               UINT16 init_crc, //initial CRC value, 16 bits
+#               const unsigned char *buf, //buffer pointer to calculate CRC on
+#               UINT64 len //buffer length in bytes (64-bit data)
+#       );
+#
+#       Reference paper titled "Fast CRC Computation for Generic
+#	Polynomials Using PCLMULQDQ Instruction"
+#       URL: http://www.intel.com/content/dam/www/public/us/en/documents
+#  /white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf
+#
+#
+
+#include <linux/linkage.h>
+
+.text
+
+#define        arg1 %rdi
+#define        arg2 %rsi
+#define        arg3 %rdx
+
+#define        arg1_low32 %edi
+
+ENTRY(crc_t10dif_pcl)
+.align 16
+
+	# adjust the 16-bit initial_crc value, scale it to 32 bits
+	shl	$16, arg1_low32
+
+	# Allocate Stack Space
+	mov     %rsp, %rcx
+	sub	$16*2, %rsp
+	# align stack to 16 byte boundary
+	and     $~(0x10 - 1), %rsp
+
+	# check if smaller than 256
+	cmp	$256, arg3
+
+	# for sizes less than 128, we can't fold 64B at a time...
+	jl	_less_than_128
+
+
+	# load the initial crc value
+	movd	arg1_low32, %xmm10	# initial crc
+
+	# crc value does not need to be byte-reflected, but it needs
+	# to be moved to the high part of the register.
+	# because data will be byte-reflected and will align with
+	# initial crc at correct place.
+	pslldq	$12, %xmm10
+
+	movdqa  SHUF_MASK(%rip), %xmm11
+	# receive the initial 64B data, xor the initial crc value
+	movdqu	16*0(arg2), %xmm0
+	movdqu	16*1(arg2), %xmm1
+	movdqu	16*2(arg2), %xmm2
+	movdqu	16*3(arg2), %xmm3
+	movdqu	16*4(arg2), %xmm4
+	movdqu	16*5(arg2), %xmm5
+	movdqu	16*6(arg2), %xmm6
+	movdqu	16*7(arg2), %xmm7
+
+	pshufb	%xmm11, %xmm0
+	# XOR the initial_crc value
+	pxor	%xmm10, %xmm0
+	pshufb	%xmm11, %xmm1
+	pshufb	%xmm11, %xmm2
+	pshufb	%xmm11, %xmm3
+	pshufb	%xmm11, %xmm4
+	pshufb	%xmm11, %xmm5
+	pshufb	%xmm11, %xmm6
+	pshufb	%xmm11, %xmm7
+
+	movdqa	rk3(%rip), %xmm10	#xmm10 has rk3 and rk4
+					#imm value of pclmulqdq instruction
+					#will determine which constant to use
+
+	#################################################################
+	# we subtract 256 instead of 128 to save one instruction from the loop
+	sub	$256, arg3
+
+	# at this section of the code, there is 64*x+y (0<=y<64) bytes of
+	# buffer. The _fold_64_B_loop will fold 64B at a time
+	# until we have 64+y Bytes of buffer
+
+
+	# fold 64B at a time. This section of the code folds 4 xmm
+	# registers in parallel
+_fold_64_B_loop:
+
+	# update the buffer pointer
+	add	$128, arg2		#    buf += 64#
+
+	movdqu	16*0(arg2), %xmm9
+	movdqu	16*1(arg2), %xmm12
+	pshufb	%xmm11, %xmm9
+	pshufb	%xmm11, %xmm12
+	movdqa	%xmm0, %xmm8
+	movdqa	%xmm1, %xmm13
+	pclmulqdq	$0x0 , %xmm10, %xmm0
+	pclmulqdq	$0x11, %xmm10, %xmm8
+	pclmulqdq	$0x0 , %xmm10, %xmm1
+	pclmulqdq	$0x11, %xmm10, %xmm13
+	pxor	%xmm9 , %xmm0
+	xorps	%xmm8 , %xmm0
+	pxor	%xmm12, %xmm1
+	xorps	%xmm13, %xmm1
+
+	movdqu	16*2(arg2), %xmm9
+	movdqu	16*3(arg2), %xmm12
+	pshufb	%xmm11, %xmm9
+	pshufb	%xmm11, %xmm12
+	movdqa	%xmm2, %xmm8
+	movdqa	%xmm3, %xmm13
+	pclmulqdq	$0x0, %xmm10, %xmm2
+	pclmulqdq	$0x11, %xmm10, %xmm8
+	pclmulqdq	$0x0, %xmm10, %xmm3
+	pclmulqdq	$0x11, %xmm10, %xmm13
+	pxor	%xmm9 , %xmm2
+	xorps	%xmm8 , %xmm2
+	pxor	%xmm12, %xmm3
+	xorps	%xmm13, %xmm3
+
+	movdqu	16*4(arg2), %xmm9
+	movdqu	16*5(arg2), %xmm12
+	pshufb	%xmm11, %xmm9
+	pshufb	%xmm11, %xmm12
+	movdqa	%xmm4, %xmm8
+	movdqa	%xmm5, %xmm13
+	pclmulqdq	$0x0,  %xmm10, %xmm4
+	pclmulqdq	$0x11, %xmm10, %xmm8
+	pclmulqdq	$0x0,  %xmm10, %xmm5
+	pclmulqdq	$0x11, %xmm10, %xmm13
+	pxor	%xmm9 ,  %xmm4
+	xorps	%xmm8 ,  %xmm4
+	pxor	%xmm12,  %xmm5
+	xorps	%xmm13,  %xmm5
+
+	movdqu	16*6(arg2), %xmm9
+	movdqu	16*7(arg2), %xmm12
+	pshufb	%xmm11, %xmm9
+	pshufb	%xmm11, %xmm12
+	movdqa	%xmm6 , %xmm8
+	movdqa	%xmm7 , %xmm13
+	pclmulqdq	$0x0 , %xmm10, %xmm6
+	pclmulqdq	$0x11, %xmm10, %xmm8
+	pclmulqdq	$0x0 , %xmm10, %xmm7
+	pclmulqdq	$0x11, %xmm10, %xmm13
+	pxor	%xmm9 , %xmm6
+	xorps	%xmm8 , %xmm6
+	pxor	%xmm12, %xmm7
+	xorps	%xmm13, %xmm7
+
+	sub	$128, arg3
+
+	# check if there is another 64B in the buffer to be able to fold
+	jge	_fold_64_B_loop
+	##################################################################
+
+
+	add	$128, arg2
+	# at this point, the buffer pointer is pointing at the last y Bytes
+	# of the buffer the 64B of folded data is in 4 of the xmm
+	# registers: xmm0, xmm1, xmm2, xmm3
+
+
+	# fold the 8 xmm registers to 1 xmm register with different constants
+
+	movdqa	rk9(%rip), %xmm10
+	movdqa	%xmm0, %xmm8
+	pclmulqdq	$0x11, %xmm10, %xmm0
+	pclmulqdq	$0x0 , %xmm10, %xmm8
+	pxor	%xmm8, %xmm7
+	xorps	%xmm0, %xmm7
+
+	movdqa	rk11(%rip), %xmm10
+	movdqa	%xmm1, %xmm8
+	pclmulqdq	 $0x11, %xmm10, %xmm1
+	pclmulqdq	 $0x0 , %xmm10, %xmm8
+	pxor	%xmm8, %xmm7
+	xorps	%xmm1, %xmm7
+
+	movdqa	rk13(%rip), %xmm10
+	movdqa	%xmm2, %xmm8
+	pclmulqdq	 $0x11, %xmm10, %xmm2
+	pclmulqdq	 $0x0 , %xmm10, %xmm8
+	pxor	%xmm8, %xmm7
+	pxor	%xmm2, %xmm7
+
+	movdqa	rk15(%rip), %xmm10
+	movdqa	%xmm3, %xmm8
+	pclmulqdq	$0x11, %xmm10, %xmm3
+	pclmulqdq	$0x0 , %xmm10, %xmm8
+	pxor	%xmm8, %xmm7
+	xorps	%xmm3, %xmm7
+
+	movdqa	rk17(%rip), %xmm10
+	movdqa	%xmm4, %xmm8
+	pclmulqdq	$0x11, %xmm10, %xmm4
+	pclmulqdq	$0x0 , %xmm10, %xmm8
+	pxor	%xmm8, %xmm7
+	pxor	%xmm4, %xmm7
+
+	movdqa	rk19(%rip), %xmm10
+	movdqa	%xmm5, %xmm8
+	pclmulqdq	$0x11, %xmm10, %xmm5
+	pclmulqdq	$0x0 , %xmm10, %xmm8
+	pxor	%xmm8, %xmm7
+	xorps	%xmm5, %xmm7
+
+	movdqa	rk1(%rip), %xmm10	#xmm10 has rk1 and rk2
+					#imm value of pclmulqdq instruction
+					#will determine which constant to use
+	movdqa	%xmm6, %xmm8
+	pclmulqdq	$0x11, %xmm10, %xmm6
+	pclmulqdq	$0x0 , %xmm10, %xmm8
+	pxor	%xmm8, %xmm7
+	pxor	%xmm6, %xmm7
+
+
+	# instead of 64, we add 48 to the loop counter to save 1 instruction
+	# from the loop instead of a cmp instruction, we use the negative
+	# flag with the jl instruction
+	add	$128-16, arg3
+	jl	_final_reduction_for_128
+
+	# now we have 16+y bytes left to reduce. 16 Bytes is in register xmm7
+	# and the rest is in memory. We can fold 16 bytes at a time if y>=16
+	# continue folding 16B at a time
+
+_16B_reduction_loop:
+	movdqa	%xmm7, %xmm8
+	pclmulqdq	$0x11, %xmm10, %xmm7
+	pclmulqdq	$0x0 , %xmm10, %xmm8
+	pxor	%xmm8, %xmm7
+	movdqu	(arg2), %xmm0
+	pshufb	%xmm11, %xmm0
+	pxor	%xmm0 , %xmm7
+	add	$16, arg2
+	sub	$16, arg3
+	# instead of a cmp instruction, we utilize the flags with the
+	# jge instruction equivalent of: cmp arg3, 16-16
+	# check if there is any more 16B in the buffer to be able to fold
+	jge	_16B_reduction_loop
+
+	#now we have 16+z bytes left to reduce, where 0<= z < 16.
+	#first, we reduce the data in the xmm7 register
+
+
+_final_reduction_for_128:
+	# check if any more data to fold. If not, compute the CRC of
+	# the final 128 bits
+	add	$16, arg3
+	je	_128_done
+
+	# here we are getting data that is less than 16 bytes.
+	# since we know that there was data before the pointer, we can
+	# offset the input pointer before the actual point, to receive
+	# exactly 16 bytes. after that the registers need to be adjusted.
+_get_last_two_xmms:
+	movdqa	%xmm7, %xmm2
+
+	movdqu	-16(arg2, arg3), %xmm1
+	pshufb	%xmm11, %xmm1
+
+	# get rid of the extra data that was loaded before
+	# load the shift constant
+	lea	pshufb_shf_table+16(%rip), %rax
+	sub	arg3, %rax
+	movdqu	(%rax), %xmm0
+
+	# shift xmm2 to the left by arg3 bytes
+	pshufb	%xmm0, %xmm2
+
+	# shift xmm7 to the right by 16-arg3 bytes
+	pxor	mask1(%rip), %xmm0
+	pshufb	%xmm0, %xmm7
+	pblendvb	%xmm2, %xmm1	#xmm0 is implicit
+
+	# fold 16 Bytes
+	movdqa	%xmm1, %xmm2
+	movdqa	%xmm7, %xmm8
+	pclmulqdq	$0x11, %xmm10, %xmm7
+	pclmulqdq	$0x0 , %xmm10, %xmm8
+	pxor	%xmm8, %xmm7
+	pxor	%xmm2, %xmm7
+
+_128_done:
+	# compute crc of a 128-bit value
+	movdqa	rk5(%rip), %xmm10	# rk5 and rk6 in xmm10
+	movdqa	%xmm7, %xmm0
+
+	#64b fold
+	pclmulqdq	$0x1, %xmm10, %xmm7
+	pslldq	$8   ,  %xmm0
+	pxor	%xmm0,  %xmm7
+
+	#32b fold
+	movdqa	%xmm7, %xmm0
+
+	pand	mask2(%rip), %xmm0
+
+	psrldq	$12, %xmm7
+	pclmulqdq	$0x10, %xmm10, %xmm7
+	pxor	%xmm0, %xmm7
+
+	#barrett reduction
+_barrett:
+	movdqa	rk7(%rip), %xmm10	# rk7 and rk8 in xmm10
+	movdqa	%xmm7, %xmm0
+	pclmulqdq	$0x01, %xmm10, %xmm7
+	pslldq	$4, %xmm7
+	pclmulqdq	$0x11, %xmm10, %xmm7
+
+	pslldq	$4, %xmm7
+	pxor	%xmm0, %xmm7
+	pextrd	$1, %xmm7, %eax
+
+_cleanup:
+	# scale the result back to 16 bits
+	shr	$16, %eax
+	mov     %rcx, %rsp
+	ret
+
+########################################################################
+
+.align 16
+_less_than_128:
+
+	# check if there is enough buffer to be able to fold 16B at a time
+	cmp	$32, arg3
+	jl	_less_than_32
+	movdqa  SHUF_MASK(%rip), %xmm11
+
+	# now if there is, load the constants
+	movdqa	rk1(%rip), %xmm10	# rk1 and rk2 in xmm10
+
+	movd	arg1_low32, %xmm0	# get the initial crc value
+	pslldq	$12, %xmm0	# align it to its correct place
+	movdqu	(arg2), %xmm7	# load the plaintext
+	pshufb	%xmm11, %xmm7	# byte-reflect the plaintext
+	pxor	%xmm0, %xmm7
+
+
+	# update the buffer pointer
+	add	$16, arg2
+
+	# update the counter. subtract 32 instead of 16 to save one
+	# instruction from the loop
+	sub	$32, arg3
+
+	jmp	_16B_reduction_loop
+
+
+.align 16
+_less_than_32:
+	# mov initial crc to the return value. this is necessary for
+	# zero-length buffers.
+	mov	arg1_low32, %eax
+	test	arg3, arg3
+	je	_cleanup
+
+	movdqa  SHUF_MASK(%rip), %xmm11
+
+	movd	arg1_low32, %xmm0	# get the initial crc value
+	pslldq	$12, %xmm0	# align it to its correct place
+
+	cmp	$16, arg3
+	je	_exact_16_left
+	jl	_less_than_16_left
+
+	movdqu	(arg2), %xmm7	# load the plaintext
+	pshufb	%xmm11, %xmm7	# byte-reflect the plaintext
+	pxor	%xmm0 , %xmm7	# xor the initial crc value
+	add	$16, arg2
+	sub	$16, arg3
+	movdqa	rk1(%rip), %xmm10	# rk1 and rk2 in xmm10
+	jmp	_get_last_two_xmms
+
+
+.align 16
+_less_than_16_left:
+	# use stack space to load data less than 16 bytes, zero-out
+	# the 16B in memory first.
+
+	pxor	%xmm1, %xmm1
+	mov	%rsp, %r11
+	movdqa	%xmm1, (%r11)
+
+	cmp	$4, arg3
+	jl	_only_less_than_4
+
+	# backup the counter value
+	mov	arg3, %r9
+	cmp	$8, arg3
+	jl	_less_than_8_left
+
+	# load 8 Bytes
+	mov	(arg2), %rax
+	mov	%rax, (%r11)
+	add	$8, %r11
+	sub	$8, arg3
+	add	$8, arg2
+_less_than_8_left:
+
+	cmp	$4, arg3
+	jl	_less_than_4_left
+
+	# load 4 Bytes
+	mov	(arg2), %eax
+	mov	%eax, (%r11)
+	add	$4, %r11
+	sub	$4, arg3
+	add	$4, arg2
+_less_than_4_left:
+
+	cmp	$2, arg3
+	jl	_less_than_2_left
+
+	# load 2 Bytes
+	mov	(arg2), %ax
+	mov	%ax, (%r11)
+	add	$2, %r11
+	sub	$2, arg3
+	add	$2, arg2
+_less_than_2_left:
+	cmp     $1, arg3
+        jl      _zero_left
+
+	# load 1 Byte
+	mov	(arg2), %al
+	mov	%al, (%r11)
+_zero_left:
+	movdqa	(%rsp), %xmm7
+	pshufb	%xmm11, %xmm7
+	pxor	%xmm0 , %xmm7	# xor the initial crc value
+
+	# shl r9, 4
+	lea	pshufb_shf_table+16(%rip), %rax
+	sub	%r9, %rax
+	movdqu	(%rax), %xmm0
+	pxor	mask1(%rip), %xmm0
+
+	pshufb	%xmm0, %xmm7
+	jmp	_128_done
+
+.align 16
+_exact_16_left:
+	movdqu	(arg2), %xmm7
+	pshufb	%xmm11, %xmm7
+	pxor	%xmm0 , %xmm7   # xor the initial crc value
+
+	jmp	_128_done
+
+_only_less_than_4:
+	cmp	$3, arg3
+	jl	_only_less_than_3
+
+	# load 3 Bytes
+	mov	(arg2), %al
+	mov	%al, (%r11)
+
+	mov	1(arg2), %al
+	mov	%al, 1(%r11)
+
+	mov	2(arg2), %al
+	mov	%al, 2(%r11)
+
+	movdqa	 (%rsp), %xmm7
+	pshufb	 %xmm11, %xmm7
+	pxor	 %xmm0 , %xmm7  # xor the initial crc value
+
+	psrldq	$5, %xmm7
+
+	jmp	_barrett
+_only_less_than_3:
+	cmp	$2, arg3
+	jl	_only_less_than_2
+
+	# load 2 Bytes
+	mov	(arg2), %al
+	mov	%al, (%r11)
+
+	mov	1(arg2), %al
+	mov	%al, 1(%r11)
+
+	movdqa	(%rsp), %xmm7
+	pshufb	%xmm11, %xmm7
+	pxor	%xmm0 , %xmm7   # xor the initial crc value
+
+	psrldq	$6, %xmm7
+
+	jmp	_barrett
+_only_less_than_2:
+
+	# load 1 Byte
+	mov	(arg2), %al
+	mov	%al, (%r11)
+
+	movdqa	(%rsp), %xmm7
+	pshufb	%xmm11, %xmm7
+	pxor	%xmm0 , %xmm7   # xor the initial crc value
+
+	psrldq	$7, %xmm7
+
+	jmp	_barrett
+
+ENDPROC(crc_t10dif_pcl)
+
+.data
+
+# precomputed constants
+# these constants are precomputed from the poly:
+# 0x8bb70000 (0x8bb7 scaled to 32 bits)
+.align 16
+# Q = 0x18BB70000
+# rk1 = 2^(32*3) mod Q << 32
+# rk2 = 2^(32*5) mod Q << 32
+# rk3 = 2^(32*15) mod Q << 32
+# rk4 = 2^(32*17) mod Q << 32
+# rk5 = 2^(32*3) mod Q << 32
+# rk6 = 2^(32*2) mod Q << 32
+# rk7 = floor(2^64/Q)
+# rk8 = Q
+rk1:
+.quad 0x2d56000000000000
+rk2:
+.quad 0x06df000000000000
+rk3:
+.quad 0x9d9d000000000000
+rk4:
+.quad 0x7cf5000000000000
+rk5:
+.quad 0x2d56000000000000
+rk6:
+.quad 0x1368000000000000
+rk7:
+.quad 0x00000001f65a57f8
+rk8:
+.quad 0x000000018bb70000
+
+rk9:
+.quad 0xceae000000000000
+rk10:
+.quad 0xbfd6000000000000
+rk11:
+.quad 0x1e16000000000000
+rk12:
+.quad 0x713c000000000000
+rk13:
+.quad 0xf7f9000000000000
+rk14:
+.quad 0x80a6000000000000
+rk15:
+.quad 0x044c000000000000
+rk16:
+.quad 0xe658000000000000
+rk17:
+.quad 0xad18000000000000
+rk18:
+.quad 0xa497000000000000
+rk19:
+.quad 0x6ee3000000000000
+rk20:
+.quad 0xe7b5000000000000
+
+
+
+mask1:
+.octa 0x80808080808080808080808080808080
+mask2:
+.octa 0x00000000FFFFFFFFFFFFFFFFFFFFFFFF
+
+SHUF_MASK:
+.octa 0x000102030405060708090A0B0C0D0E0F
+
+pshufb_shf_table:
+# use these values for shift constants for the pshufb instruction
+# different alignments result in values as shown:
+#	DDQ 0x008f8e8d8c8b8a898887868584838281 # shl 15 (16-1) / shr1
+#	DDQ 0x01008f8e8d8c8b8a8988878685848382 # shl 14 (16-3) / shr2
+#	DDQ 0x0201008f8e8d8c8b8a89888786858483 # shl 13 (16-4) / shr3
+#	DDQ 0x030201008f8e8d8c8b8a898887868584 # shl 12 (16-4) / shr4
+#	DDQ 0x04030201008f8e8d8c8b8a8988878685 # shl 11 (16-5) / shr5
+#	DDQ 0x0504030201008f8e8d8c8b8a89888786 # shl 10 (16-6) / shr6
+#	DDQ 0x060504030201008f8e8d8c8b8a898887 # shl 9  (16-7) / shr7
+#	DDQ 0x07060504030201008f8e8d8c8b8a8988 # shl 8  (16-8) / shr8
+#	DDQ 0x0807060504030201008f8e8d8c8b8a89 # shl 7  (16-9) / shr9
+#	DDQ 0x090807060504030201008f8e8d8c8b8a # shl 6  (16-10) / shr10
+#	DDQ 0x0a090807060504030201008f8e8d8c8b # shl 5  (16-11) / shr11
+#	DDQ 0x0b0a090807060504030201008f8e8d8c # shl 4  (16-12) / shr12
+#	DDQ 0x0c0b0a090807060504030201008f8e8d # shl 3  (16-13) / shr13
+#	DDQ 0x0d0c0b0a090807060504030201008f8e # shl 2  (16-14) / shr14
+#	DDQ 0x0e0d0c0b0a090807060504030201008f # shl 1  (16-15) / shr15
+.octa 0x8f8e8d8c8b8a89888786858483828100
+.octa 0x000e0d0c0b0a09080706050403020100
diff --git a/arch/x86/crypto/crct10dif-pclmul_glue.c b/arch/x86/crypto/crct10dif-pclmul_glue.c
new file mode 100644
index 0000000..7845d7f
--- /dev/null
+++ b/arch/x86/crypto/crct10dif-pclmul_glue.c
@@ -0,0 +1,151 @@
+/*
+ * Cryptographic API.
+ *
+ * T10 Data Integrity Field CRC16 Crypto Transform using PCLMULQDQ Instructions
+ *
+ * Copyright (C) 2013 Intel Corporation
+ * Author: Tim Chen <tim.c.chen@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/crc-t10dif.h>
+#include <crypto/internal/hash.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <asm/i387.h>
+#include <asm/cpufeature.h>
+#include <asm/cpu_device_id.h>
+
+asmlinkage __u16 crc_t10dif_pcl(__u16 crc, const unsigned char *buf,
+				size_t len);
+
+struct chksum_desc_ctx {
+	__u16 crc;
+};
+
+/*
+ * Steps through buffer one byte at at time, calculates reflected
+ * crc using table.
+ */
+
+static int chksum_init(struct shash_desc *desc)
+{
+	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
+
+	ctx->crc = 0;
+
+	return 0;
+}
+
+static int chksum_update(struct shash_desc *desc, const u8 *data,
+			 unsigned int length)
+{
+	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
+
+	if (irq_fpu_usable()) {
+		kernel_fpu_begin();
+		ctx->crc = crc_t10dif_pcl(ctx->crc, data, length);
+		kernel_fpu_end();
+	} else
+		ctx->crc = crc_t10dif_generic(ctx->crc, data, length);
+	return 0;
+}
+
+static int chksum_final(struct shash_desc *desc, u8 *out)
+{
+	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
+
+	*(__u16 *)out = ctx->crc;
+	return 0;
+}
+
+static int __chksum_finup(__u16 *crcp, const u8 *data, unsigned int len,
+			u8 *out)
+{
+	if (irq_fpu_usable()) {
+		kernel_fpu_begin();
+		*(__u16 *)out = crc_t10dif_pcl(*crcp, data, len);
+		kernel_fpu_end();
+	} else
+		*(__u16 *)out = crc_t10dif_generic(*crcp, data, len);
+	return 0;
+}
+
+static int chksum_finup(struct shash_desc *desc, const u8 *data,
+			unsigned int len, u8 *out)
+{
+	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
+
+	return __chksum_finup(&ctx->crc, data, len, out);
+}
+
+static int chksum_digest(struct shash_desc *desc, const u8 *data,
+			 unsigned int length, u8 *out)
+{
+	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
+
+	return __chksum_finup(&ctx->crc, data, length, out);
+}
+
+static struct shash_alg alg = {
+	.digestsize		=	CRC_T10DIF_DIGEST_SIZE,
+	.init		=	chksum_init,
+	.update		=	chksum_update,
+	.final		=	chksum_final,
+	.finup		=	chksum_finup,
+	.digest		=	chksum_digest,
+	.descsize		=	sizeof(struct chksum_desc_ctx),
+	.base			=	{
+		.cra_name		=	"crct10dif",
+		.cra_driver_name	=	"crct10dif-pclmul",
+		.cra_priority		=	200,
+		.cra_blocksize		=	CRC_T10DIF_BLOCK_SIZE,
+		.cra_module		=	THIS_MODULE,
+	}
+};
+
+static const struct x86_cpu_id crct10dif_cpu_id[] = {
+	X86_FEATURE_MATCH(X86_FEATURE_PCLMULQDQ),
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, crct10dif_cpu_id);
+
+static int __init crct10dif_intel_mod_init(void)
+{
+	if (!x86_match_cpu(crct10dif_cpu_id))
+		return -ENODEV;
+
+	return crypto_register_shash(&alg);
+}
+
+static void __exit crct10dif_intel_mod_fini(void)
+{
+	crypto_unregister_shash(&alg);
+}
+
+module_init(crct10dif_intel_mod_init);
+module_exit(crct10dif_intel_mod_fini);
+
+MODULE_AUTHOR("Tim Chen <tim.c.chen@linux.intel.com>");
+MODULE_DESCRIPTION("T10 DIF CRC calculation accelerated with PCLMULQDQ.");
+MODULE_LICENSE("GPL");
+
+MODULE_ALIAS("crct10dif");
+MODULE_ALIAS("crct10dif-pclmul");
diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c
index bccfca6..665a730 100644
--- a/arch/x86/ia32/ia32_signal.c
+++ b/arch/x86/ia32/ia32_signal.c
@@ -457,7 +457,7 @@ int ia32_setup_rt_frame(int sig, struct ksignal *ksig,
 		else
 			put_user_ex(0, &frame->uc.uc_flags);
 		put_user_ex(0, &frame->uc.uc_link);
-		err |= __compat_save_altstack(&frame->uc.uc_stack, regs->sp);
+		compat_save_altstack_ex(&frame->uc.uc_stack, regs->sp);
 
 		if (ksig->ka.sa.sa_flags & SA_RESTORER)
 			restorer = ksig->ka.sa.sa_restorer;
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 474dc1b..4299eb0 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -452,7 +452,7 @@ ia32_badsys:
 
 	CFI_ENDPROC
 	
-	.macro PTREGSCALL label, func, arg
+	.macro PTREGSCALL label, func
 	ALIGN
 GLOBAL(\label)
 	leaq \func(%rip),%rax
diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index 2dfac58..b1977ba 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -86,6 +86,7 @@ extern int acpi_pci_disabled;
 extern int acpi_skip_timer_override;
 extern int acpi_use_timer_override;
 extern int acpi_fix_pin2_polarity;
+extern int acpi_disable_cmcff;
 
 extern u8 acpi_sci_flags;
 extern int acpi_sci_override_gsi;
@@ -168,6 +169,7 @@ static inline void arch_acpi_set_pdc_bits(u32 *buf)
 
 #define acpi_lapic 0
 #define acpi_ioapic 0
+#define acpi_disable_cmcff 0
 static inline void acpi_noirq_set(void) { }
 static inline void acpi_disable_pci(void) { }
 static inline void disable_acpi(void) { }
diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
index 58ed6d9..0a3f9c9 100644
--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -5,6 +5,7 @@
 #include <linux/stddef.h>
 #include <linux/stringify.h>
 #include <asm/asm.h>
+#include <asm/ptrace.h>
 
 /*
  * Alternative inline assembly for SMP.
@@ -220,20 +221,11 @@ extern void *text_poke_early(void *addr, const void *opcode, size_t len);
  * no thread can be preempted in the instructions being modified (no iret to an
  * invalid instruction possible) or if the instructions are changed from a
  * consistent state to another consistent state atomically.
- * More care must be taken when modifying code in the SMP case because of
- * Intel's errata. text_poke_smp() takes care that errata, but still
- * doesn't support NMI/MCE handler code modifying.
  * On the local CPU you need to be protected again NMI or MCE handlers seeing an
  * inconsistent instruction while you patch.
  */
-struct text_poke_param {
-	void *addr;
-	const void *opcode;
-	size_t len;
-};
-
 extern void *text_poke(void *addr, const void *opcode, size_t len);
-extern void *text_poke_smp(void *addr, const void *opcode, size_t len);
-extern void text_poke_smp_batch(struct text_poke_param *params, int n);
+extern int poke_int3_handler(struct pt_regs *regs);
+extern void *text_poke_bp(void *addr, const void *opcode, size_t len, void *handler);
 
 #endif /* _ASM_X86_ALTERNATIVE_H */
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index f8119b5..1d2091a 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -715,4 +715,6 @@ static inline void exiting_ack_irq(void)
 	ack_APIC_irq();
 }
 
+extern void ioapic_zap_locks(void);
+
 #endif /* _ASM_X86_APIC_H */
diff --git a/arch/x86/include/asm/asm.h b/arch/x86/include/asm/asm.h
index 1c2d247..4582e8e 100644
--- a/arch/x86/include/asm/asm.h
+++ b/arch/x86/include/asm/asm.h
@@ -3,21 +3,25 @@
 
 #ifdef __ASSEMBLY__
 # define __ASM_FORM(x)	x
+# define __ASM_FORM_RAW(x)     x
 # define __ASM_FORM_COMMA(x) x,
 #else
 # define __ASM_FORM(x)	" " #x " "
+# define __ASM_FORM_RAW(x)     #x
 # define __ASM_FORM_COMMA(x) " " #x ","
 #endif
 
 #ifdef CONFIG_X86_32
 # define __ASM_SEL(a,b) __ASM_FORM(a)
+# define __ASM_SEL_RAW(a,b) __ASM_FORM_RAW(a)
 #else
 # define __ASM_SEL(a,b) __ASM_FORM(b)
+# define __ASM_SEL_RAW(a,b) __ASM_FORM_RAW(b)
 #endif
 
 #define __ASM_SIZE(inst, ...)	__ASM_SEL(inst##l##__VA_ARGS__, \
 					  inst##q##__VA_ARGS__)
-#define __ASM_REG(reg)		__ASM_SEL(e##reg, r##reg)
+#define __ASM_REG(reg)         __ASM_SEL_RAW(e##reg, r##reg)
 
 #define _ASM_PTR	__ASM_SEL(.long, .quad)
 #define _ASM_ALIGN	__ASM_SEL(.balign 4, .balign 8)
diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h
index 6dfd019..41639ce 100644
--- a/arch/x86/include/asm/bitops.h
+++ b/arch/x86/include/asm/bitops.h
@@ -15,6 +15,14 @@
 #include <linux/compiler.h>
 #include <asm/alternative.h>
 
+#if BITS_PER_LONG == 32
+# define _BITOPS_LONG_SHIFT 5
+#elif BITS_PER_LONG == 64
+# define _BITOPS_LONG_SHIFT 6
+#else
+# error "Unexpected BITS_PER_LONG"
+#endif
+
 #define BIT_64(n)			(U64_C(1) << (n))
 
 /*
@@ -59,7 +67,7 @@
  * restricted to acting on a single-word quantity.
  */
 static __always_inline void
-set_bit(unsigned int nr, volatile unsigned long *addr)
+set_bit(long nr, volatile unsigned long *addr)
 {
 	if (IS_IMMEDIATE(nr)) {
 		asm volatile(LOCK_PREFIX "orb %1,%0"
@@ -81,7 +89,7 @@ set_bit(unsigned int nr, volatile unsigned long *addr)
  * If it's called on the same region of memory simultaneously, the effect
  * may be that only one operation succeeds.
  */
-static inline void __set_bit(int nr, volatile unsigned long *addr)
+static inline void __set_bit(long nr, volatile unsigned long *addr)
 {
 	asm volatile("bts %1,%0" : ADDR : "Ir" (nr) : "memory");
 }
@@ -97,7 +105,7 @@ static inline void __set_bit(int nr, volatile unsigned long *addr)
  * in order to ensure changes are visible on other processors.
  */
 static __always_inline void
-clear_bit(int nr, volatile unsigned long *addr)
+clear_bit(long nr, volatile unsigned long *addr)
 {
 	if (IS_IMMEDIATE(nr)) {
 		asm volatile(LOCK_PREFIX "andb %1,%0"
@@ -118,13 +126,13 @@ clear_bit(int nr, volatile unsigned long *addr)
  * clear_bit() is atomic and implies release semantics before the memory
  * operation. It can be used for an unlock.
  */
-static inline void clear_bit_unlock(unsigned nr, volatile unsigned long *addr)
+static inline void clear_bit_unlock(long nr, volatile unsigned long *addr)
 {
 	barrier();
 	clear_bit(nr, addr);
 }
 
-static inline void __clear_bit(int nr, volatile unsigned long *addr)
+static inline void __clear_bit(long nr, volatile unsigned long *addr)
 {
 	asm volatile("btr %1,%0" : ADDR : "Ir" (nr));
 }
@@ -141,7 +149,7 @@ static inline void __clear_bit(int nr, volatile unsigned long *addr)
  * No memory barrier is required here, because x86 cannot reorder stores past
  * older loads. Same principle as spin_unlock.
  */
-static inline void __clear_bit_unlock(unsigned nr, volatile unsigned long *addr)
+static inline void __clear_bit_unlock(long nr, volatile unsigned long *addr)
 {
 	barrier();
 	__clear_bit(nr, addr);
@@ -159,7 +167,7 @@ static inline void __clear_bit_unlock(unsigned nr, volatile unsigned long *addr)
  * If it's called on the same region of memory simultaneously, the effect
  * may be that only one operation succeeds.
  */
-static inline void __change_bit(int nr, volatile unsigned long *addr)
+static inline void __change_bit(long nr, volatile unsigned long *addr)
 {
 	asm volatile("btc %1,%0" : ADDR : "Ir" (nr));
 }
@@ -173,7 +181,7 @@ static inline void __change_bit(int nr, volatile unsigned long *addr)
  * Note that @nr may be almost arbitrarily large; this function is not
  * restricted to acting on a single-word quantity.
  */
-static inline void change_bit(int nr, volatile unsigned long *addr)
+static inline void change_bit(long nr, volatile unsigned long *addr)
 {
 	if (IS_IMMEDIATE(nr)) {
 		asm volatile(LOCK_PREFIX "xorb %1,%0"
@@ -194,7 +202,7 @@ static inline void change_bit(int nr, volatile unsigned long *addr)
  * This operation is atomic and cannot be reordered.
  * It also implies a memory barrier.
  */
-static inline int test_and_set_bit(int nr, volatile unsigned long *addr)
+static inline int test_and_set_bit(long nr, volatile unsigned long *addr)
 {
 	int oldbit;
 
@@ -212,7 +220,7 @@ static inline int test_and_set_bit(int nr, volatile unsigned long *addr)
  * This is the same as test_and_set_bit on x86.
  */
 static __always_inline int
-test_and_set_bit_lock(int nr, volatile unsigned long *addr)
+test_and_set_bit_lock(long nr, volatile unsigned long *addr)
 {
 	return test_and_set_bit(nr, addr);
 }
@@ -226,7 +234,7 @@ test_and_set_bit_lock(int nr, volatile unsigned long *addr)
  * If two examples of this operation race, one can appear to succeed
  * but actually fail.  You must protect multiple accesses with a lock.
  */
-static inline int __test_and_set_bit(int nr, volatile unsigned long *addr)
+static inline int __test_and_set_bit(long nr, volatile unsigned long *addr)
 {
 	int oldbit;
 
@@ -245,7 +253,7 @@ static inline int __test_and_set_bit(int nr, volatile unsigned long *addr)
  * This operation is atomic and cannot be reordered.
  * It also implies a memory barrier.
  */
-static inline int test_and_clear_bit(int nr, volatile unsigned long *addr)
+static inline int test_and_clear_bit(long nr, volatile unsigned long *addr)
 {
 	int oldbit;
 
@@ -272,7 +280,7 @@ static inline int test_and_clear_bit(int nr, volatile unsigned long *addr)
  * accessed from a hypervisor on the same CPU if running in a VM: don't change
  * this without also updating arch/x86/kernel/kvm.c
  */
-static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr)
+static inline int __test_and_clear_bit(long nr, volatile unsigned long *addr)
 {
 	int oldbit;
 
@@ -284,7 +292,7 @@ static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr)
 }
 
 /* WARNING: non atomic and it can be reordered! */
-static inline int __test_and_change_bit(int nr, volatile unsigned long *addr)
+static inline int __test_and_change_bit(long nr, volatile unsigned long *addr)
 {
 	int oldbit;
 
@@ -304,7 +312,7 @@ static inline int __test_and_change_bit(int nr, volatile unsigned long *addr)
  * This operation is atomic and cannot be reordered.
  * It also implies a memory barrier.
  */
-static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
+static inline int test_and_change_bit(long nr, volatile unsigned long *addr)
 {
 	int oldbit;
 
@@ -315,13 +323,13 @@ static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
 	return oldbit;
 }
 
-static __always_inline int constant_test_bit(unsigned int nr, const volatile unsigned long *addr)
+static __always_inline int constant_test_bit(long nr, const volatile unsigned long *addr)
 {
-	return ((1UL << (nr % BITS_PER_LONG)) &
-		(addr[nr / BITS_PER_LONG])) != 0;
+	return ((1UL << (nr & (BITS_PER_LONG-1))) &
+		(addr[nr >> _BITOPS_LONG_SHIFT])) != 0;
 }
 
-static inline int variable_test_bit(int nr, volatile const unsigned long *addr)
+static inline int variable_test_bit(long nr, volatile const unsigned long *addr)
 {
 	int oldbit;
 
diff --git a/arch/x86/include/asm/checksum_32.h b/arch/x86/include/asm/checksum_32.h
index 46fc474..f50de69 100644
--- a/arch/x86/include/asm/checksum_32.h
+++ b/arch/x86/include/asm/checksum_32.h
@@ -49,9 +49,15 @@ static inline __wsum csum_partial_copy_from_user(const void __user *src,
 						 int len, __wsum sum,
 						 int *err_ptr)
 {
+	__wsum ret;
+
 	might_sleep();
-	return csum_partial_copy_generic((__force void *)src, dst,
-					 len, sum, err_ptr, NULL);
+	stac();
+	ret = csum_partial_copy_generic((__force void *)src, dst,
+					len, sum, err_ptr, NULL);
+	clac();
+
+	return ret;
 }
 
 /*
@@ -176,10 +182,16 @@ static inline __wsum csum_and_copy_to_user(const void *src,
 					   int len, __wsum sum,
 					   int *err_ptr)
 {
+	__wsum ret;
+
 	might_sleep();
-	if (access_ok(VERIFY_WRITE, dst, len))
-		return csum_partial_copy_generic(src, (__force void *)dst,
-						 len, sum, NULL, err_ptr);
+	if (access_ok(VERIFY_WRITE, dst, len)) {
+		stac();
+		ret = csum_partial_copy_generic(src, (__force void *)dst,
+						len, sum, NULL, err_ptr);
+		clac();
+		return ret;
+	}
 
 	if (len)
 		*err_ptr = -EFAULT;
diff --git a/arch/x86/include/asm/checksum_64.h b/arch/x86/include/asm/checksum_64.h
index 9bfdc41..e6fd8a0 100644
--- a/arch/x86/include/asm/checksum_64.h
+++ b/arch/x86/include/asm/checksum_64.h
@@ -133,7 +133,7 @@ extern __wsum csum_partial(const void *buff, int len, __wsum sum);
 
 
 /* Do not call this directly. Use the wrappers below */
-extern __wsum csum_partial_copy_generic(const void *src, const void *dst,
+extern __visible __wsum csum_partial_copy_generic(const void *src, const void *dst,
 					int len, __wsum sum,
 					int *src_err_ptr, int *dst_err_ptr);
 
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 47538a6..89270b43 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -366,14 +366,15 @@ extern bool __static_cpu_has_safe(u16 bit);
  */
 static __always_inline __pure bool __static_cpu_has(u16 bit)
 {
-#if __GNUC__ > 4 || __GNUC_MINOR__ >= 5
+#ifdef CC_HAVE_ASM_GOTO
 
 #ifdef CONFIG_X86_DEBUG_STATIC_CPU_HAS
+
 		/*
 		 * Catch too early usage of this before alternatives
 		 * have run.
 		 */
-		asm goto("1: jmp %l[t_warn]\n"
+		asm_volatile_goto("1: jmp %l[t_warn]\n"
 			 "2:\n"
 			 ".section .altinstructions,\"a\"\n"
 			 " .long 1b - .\n"
@@ -384,9 +385,10 @@ static __always_inline __pure bool __static_cpu_has(u16 bit)
 			 ".previous\n"
 			 /* skipping size check since replacement size = 0 */
 			 : : "i" (X86_FEATURE_ALWAYS) : : t_warn);
+
 #endif
 
-		asm goto("1: jmp %l[t_no]\n"
+		asm_volatile_goto("1: jmp %l[t_no]\n"
 			 "2:\n"
 			 ".section .altinstructions,\"a\"\n"
 			 " .long 1b - .\n"
@@ -406,7 +408,9 @@ static __always_inline __pure bool __static_cpu_has(u16 bit)
 		warn_pre_alternatives();
 		return false;
 #endif
-#else /* GCC_VERSION >= 40500 */
+
+#else /* CC_HAVE_ASM_GOTO */
+
 		u8 flag;
 		/* Open-coded due to __stringify() in ALTERNATIVE() */
 		asm volatile("1: movb $0,%0\n"
@@ -427,7 +431,8 @@ static __always_inline __pure bool __static_cpu_has(u16 bit)
 			     ".previous\n"
 			     : "=qm" (flag) : "i" (bit));
 		return flag;
-#endif
+
+#endif /* CC_HAVE_ASM_GOTO */
 }
 
 #define static_cpu_has(bit)					\
@@ -441,14 +446,14 @@ static __always_inline __pure bool __static_cpu_has(u16 bit)
 
 static __always_inline __pure bool _static_cpu_has_safe(u16 bit)
 {
-#if __GNUC__ > 4 || __GNUC_MINOR__ >= 5
+#ifdef CC_HAVE_ASM_GOTO
 /*
  * We need to spell the jumps to the compiler because, depending on the offset,
  * the replacement jump can be bigger than the original jump, and this we cannot
  * have. Thus, we force the jump to the widest, 4-byte, signed relative
  * offset even though the last would often fit in less bytes.
  */
-		asm goto("1: .byte 0xe9\n .long %l[t_dynamic] - 2f\n"
+		asm_volatile_goto("1: .byte 0xe9\n .long %l[t_dynamic] - 2f\n"
 			 "2:\n"
 			 ".section .altinstructions,\"a\"\n"
 			 " .long 1b - .\n"		/* src offset */
@@ -475,7 +480,7 @@ static __always_inline __pure bool _static_cpu_has_safe(u16 bit)
 		return false;
 	t_dynamic:
 		return __static_cpu_has_safe(bit);
-#else /* GCC_VERSION >= 40500 */
+#else
 		u8 flag;
 		/* Open-coded due to __stringify() in ALTERNATIVE() */
 		asm volatile("1: movb $2,%0\n"
@@ -511,7 +516,7 @@ static __always_inline __pure bool _static_cpu_has_safe(u16 bit)
 			     : "=qm" (flag)
 			     : "i" (bit), "i" (X86_FEATURE_ALWAYS));
 		return (flag == 2 ? __static_cpu_has_safe(bit) : flag);
-#endif
+#endif /* CC_HAVE_ASM_GOTO */
 }
 
 #define static_cpu_has_safe(bit)				\
diff --git a/arch/x86/include/asm/dma-contiguous.h b/arch/x86/include/asm/dma-contiguous.h
index c092416..b4b38ba 100644
--- a/arch/x86/include/asm/dma-contiguous.h
+++ b/arch/x86/include/asm/dma-contiguous.h
@@ -4,7 +4,6 @@
 #ifdef __KERNEL__
 
 #include <linux/types.h>
-#include <asm-generic/dma-contiguous.h>
 
 static inline void
 dma_contiguous_early_fixup(phys_addr_t base, unsigned long size) { }
diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h
index cccd07f..779c2ef 100644
--- a/arch/x86/include/asm/e820.h
+++ b/arch/x86/include/asm/e820.h
@@ -29,7 +29,7 @@ extern void e820_setup_gap(void);
 extern int e820_search_gap(unsigned long *gapstart, unsigned long *gapsize,
 			unsigned long start_addr, unsigned long long end_addr);
 struct setup_data;
-extern void parse_e820_ext(struct setup_data *data);
+extern void parse_e820_ext(u64 phys_addr, u32 data_len);
 
 #if defined(CONFIG_X86_64) || \
 	(defined(CONFIG_X86_32) && defined(CONFIG_HIBERNATION))
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index e4ac559..92b3bae 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -26,56 +26,56 @@
 #include <asm/sections.h>
 
 /* Interrupt handlers registered during init_IRQ */
-extern void apic_timer_interrupt(void);
-extern void x86_platform_ipi(void);
-extern void kvm_posted_intr_ipi(void);
-extern void error_interrupt(void);
-extern void irq_work_interrupt(void);
-
-extern void spurious_interrupt(void);
-extern void thermal_interrupt(void);
-extern void reschedule_interrupt(void);
-
-extern void invalidate_interrupt(void);
-extern void invalidate_interrupt0(void);
-extern void invalidate_interrupt1(void);
-extern void invalidate_interrupt2(void);
-extern void invalidate_interrupt3(void);
-extern void invalidate_interrupt4(void);
-extern void invalidate_interrupt5(void);
-extern void invalidate_interrupt6(void);
-extern void invalidate_interrupt7(void);
-extern void invalidate_interrupt8(void);
-extern void invalidate_interrupt9(void);
-extern void invalidate_interrupt10(void);
-extern void invalidate_interrupt11(void);
-extern void invalidate_interrupt12(void);
-extern void invalidate_interrupt13(void);
-extern void invalidate_interrupt14(void);
-extern void invalidate_interrupt15(void);
-extern void invalidate_interrupt16(void);
-extern void invalidate_interrupt17(void);
-extern void invalidate_interrupt18(void);
-extern void invalidate_interrupt19(void);
-extern void invalidate_interrupt20(void);
-extern void invalidate_interrupt21(void);
-extern void invalidate_interrupt22(void);
-extern void invalidate_interrupt23(void);
-extern void invalidate_interrupt24(void);
-extern void invalidate_interrupt25(void);
-extern void invalidate_interrupt26(void);
-extern void invalidate_interrupt27(void);
-extern void invalidate_interrupt28(void);
-extern void invalidate_interrupt29(void);
-extern void invalidate_interrupt30(void);
-extern void invalidate_interrupt31(void);
-
-extern void irq_move_cleanup_interrupt(void);
-extern void reboot_interrupt(void);
-extern void threshold_interrupt(void);
-
-extern void call_function_interrupt(void);
-extern void call_function_single_interrupt(void);
+extern asmlinkage void apic_timer_interrupt(void);
+extern asmlinkage void x86_platform_ipi(void);
+extern asmlinkage void kvm_posted_intr_ipi(void);
+extern asmlinkage void error_interrupt(void);
+extern asmlinkage void irq_work_interrupt(void);
+
+extern asmlinkage void spurious_interrupt(void);
+extern asmlinkage void thermal_interrupt(void);
+extern asmlinkage void reschedule_interrupt(void);
+
+extern asmlinkage void invalidate_interrupt(void);
+extern asmlinkage void invalidate_interrupt0(void);
+extern asmlinkage void invalidate_interrupt1(void);
+extern asmlinkage void invalidate_interrupt2(void);
+extern asmlinkage void invalidate_interrupt3(void);
+extern asmlinkage void invalidate_interrupt4(void);
+extern asmlinkage void invalidate_interrupt5(void);
+extern asmlinkage void invalidate_interrupt6(void);
+extern asmlinkage void invalidate_interrupt7(void);
+extern asmlinkage void invalidate_interrupt8(void);
+extern asmlinkage void invalidate_interrupt9(void);
+extern asmlinkage void invalidate_interrupt10(void);
+extern asmlinkage void invalidate_interrupt11(void);
+extern asmlinkage void invalidate_interrupt12(void);
+extern asmlinkage void invalidate_interrupt13(void);
+extern asmlinkage void invalidate_interrupt14(void);
+extern asmlinkage void invalidate_interrupt15(void);
+extern asmlinkage void invalidate_interrupt16(void);
+extern asmlinkage void invalidate_interrupt17(void);
+extern asmlinkage void invalidate_interrupt18(void);
+extern asmlinkage void invalidate_interrupt19(void);
+extern asmlinkage void invalidate_interrupt20(void);
+extern asmlinkage void invalidate_interrupt21(void);
+extern asmlinkage void invalidate_interrupt22(void);
+extern asmlinkage void invalidate_interrupt23(void);
+extern asmlinkage void invalidate_interrupt24(void);
+extern asmlinkage void invalidate_interrupt25(void);
+extern asmlinkage void invalidate_interrupt26(void);
+extern asmlinkage void invalidate_interrupt27(void);
+extern asmlinkage void invalidate_interrupt28(void);
+extern asmlinkage void invalidate_interrupt29(void);
+extern asmlinkage void invalidate_interrupt30(void);
+extern asmlinkage void invalidate_interrupt31(void);
+
+extern asmlinkage void irq_move_cleanup_interrupt(void);
+extern asmlinkage void reboot_interrupt(void);
+extern asmlinkage void threshold_interrupt(void);
+
+extern asmlinkage void call_function_interrupt(void);
+extern asmlinkage void call_function_single_interrupt(void);
 
 #ifdef CONFIG_TRACING
 /* Interrupt handlers registered during init_IRQ */
@@ -172,22 +172,18 @@ extern atomic_t irq_mis_count;
 extern void eisa_set_level_irq(unsigned int irq);
 
 /* SMP */
-extern void smp_apic_timer_interrupt(struct pt_regs *);
-extern void smp_spurious_interrupt(struct pt_regs *);
-extern void smp_x86_platform_ipi(struct pt_regs *);
-extern void smp_error_interrupt(struct pt_regs *);
+extern __visible void smp_apic_timer_interrupt(struct pt_regs *);
+extern __visible void smp_spurious_interrupt(struct pt_regs *);
+extern __visible void smp_x86_platform_ipi(struct pt_regs *);
+extern __visible void smp_error_interrupt(struct pt_regs *);
 #ifdef CONFIG_X86_IO_APIC
 extern asmlinkage void smp_irq_move_cleanup_interrupt(void);
 #endif
 #ifdef CONFIG_SMP
-extern void smp_reschedule_interrupt(struct pt_regs *);
-extern void smp_call_function_interrupt(struct pt_regs *);
-extern void smp_call_function_single_interrupt(struct pt_regs *);
-#ifdef CONFIG_X86_32
-extern void smp_invalidate_interrupt(struct pt_regs *);
-#else
-extern asmlinkage void smp_invalidate_interrupt(struct pt_regs *);
-#endif
+extern __visible void smp_reschedule_interrupt(struct pt_regs *);
+extern __visible void smp_call_function_interrupt(struct pt_regs *);
+extern __visible void smp_call_function_single_interrupt(struct pt_regs *);
+extern __visible void smp_invalidate_interrupt(struct pt_regs *);
 #endif
 
 extern void (*__initconst interrupt[NR_VECTORS-FIRST_EXTERNAL_VECTOR])(void);
diff --git a/arch/x86/include/asm/hypervisor.h b/arch/x86/include/asm/hypervisor.h
index 2d4b5e6..e42f758 100644
--- a/arch/x86/include/asm/hypervisor.h
+++ b/arch/x86/include/asm/hypervisor.h
@@ -33,7 +33,7 @@ struct hypervisor_x86 {
 	const char	*name;
 
 	/* Detection routine */
-	bool		(*detect)(void);
+	uint32_t	(*detect)(void);
 
 	/* Adjust CPU feature bits (run once per CPU) */
 	void		(*set_cpu_features)(struct cpuinfo_x86 *);
diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h
index 57873be..0ea10f27 100644
--- a/arch/x86/include/asm/irq.h
+++ b/arch/x86/include/asm/irq.h
@@ -33,7 +33,7 @@ extern void (*x86_platform_ipi_callback)(void);
 extern void native_init_IRQ(void);
 extern bool handle_irq(unsigned irq, struct pt_regs *regs);
 
-extern unsigned int do_IRQ(struct pt_regs *regs);
+extern __visible unsigned int do_IRQ(struct pt_regs *regs);
 
 /* Interrupt vector management */
 extern DECLARE_BITMAP(used_vectors, NR_VECTORS);
diff --git a/arch/x86/include/asm/jump_label.h b/arch/x86/include/asm/jump_label.h
index 3a16c14..6a2cefb 100644
--- a/arch/x86/include/asm/jump_label.h
+++ b/arch/x86/include/asm/jump_label.h
@@ -3,18 +3,23 @@
 
 #ifdef __KERNEL__
 
+#include <linux/stringify.h>
 #include <linux/types.h>
 #include <asm/nops.h>
 #include <asm/asm.h>
 
 #define JUMP_LABEL_NOP_SIZE 5
 
-#define STATIC_KEY_INITIAL_NOP ".byte 0xe9 \n\t .long 0\n\t"
+#ifdef CONFIG_X86_64
+# define STATIC_KEY_INIT_NOP P6_NOP5_ATOMIC
+#else
+# define STATIC_KEY_INIT_NOP GENERIC_NOP5_ATOMIC
+#endif
 
 static __always_inline bool arch_static_branch(struct static_key *key)
 {
-	asm goto("1:"
-		STATIC_KEY_INITIAL_NOP
+	asm_volatile_goto("1:"
+		".byte " __stringify(STATIC_KEY_INIT_NOP) "\n\t"
 		".pushsection __jump_table,  \"aw\" \n\t"
 		_ASM_ALIGN "\n\t"
 		_ASM_PTR "1b, %l[l_yes], %c0 \n\t"
diff --git a/arch/x86/include/asm/kprobes.h b/arch/x86/include/asm/kprobes.h
index 5a6d287..9454c16 100644
--- a/arch/x86/include/asm/kprobes.h
+++ b/arch/x86/include/asm/kprobes.h
@@ -49,10 +49,10 @@ typedef u8 kprobe_opcode_t;
 #define flush_insn_slot(p)	do { } while (0)
 
 /* optinsn template addresses */
-extern kprobe_opcode_t optprobe_template_entry;
-extern kprobe_opcode_t optprobe_template_val;
-extern kprobe_opcode_t optprobe_template_call;
-extern kprobe_opcode_t optprobe_template_end;
+extern __visible kprobe_opcode_t optprobe_template_entry;
+extern __visible kprobe_opcode_t optprobe_template_val;
+extern __visible kprobe_opcode_t optprobe_template_call;
+extern __visible kprobe_opcode_t optprobe_template_end;
 #define MAX_OPTIMIZED_LENGTH (MAX_INSN_SIZE + RELATIVE_ADDR_SIZE)
 #define MAX_OPTINSN_SIZE 				\
 	(((unsigned long)&optprobe_template_end -	\
@@ -62,7 +62,7 @@ extern kprobe_opcode_t optprobe_template_end;
 extern const int kretprobe_blacklist_size;
 
 void arch_remove_kprobe(struct kprobe *p);
-void kretprobe_trampoline(void);
+asmlinkage void kretprobe_trampoline(void);
 
 /* Architecture specific copy of original instruction*/
 struct arch_specific_insn {
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index f87f7fc..c76ff74 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -286,6 +286,7 @@ struct kvm_mmu {
 	u64 *pae_root;
 	u64 *lm_root;
 	u64 rsvd_bits_mask[2][4];
+	u64 bad_mt_xwr;
 
 	/*
 	 * Bitmap: bit set = last pte in walk
@@ -323,6 +324,7 @@ struct kvm_pmu {
 	u64 global_ovf_ctrl;
 	u64 counter_bitmask[2];
 	u64 global_ctrl_mask;
+	u64 reserved_bits;
 	u8 version;
 	struct kvm_pmc gp_counters[INTEL_PMC_MAX_GENERIC];
 	struct kvm_pmc fixed_counters[INTEL_PMC_MAX_FIXED];
@@ -511,6 +513,14 @@ struct kvm_vcpu_arch {
 	 * instruction.
 	 */
 	bool write_fault_to_shadow_pgtable;
+
+	/* set at EPT violation at this point */
+	unsigned long exit_qualification;
+
+	/* pv related host specific info */
+	struct {
+		bool pv_unhalted;
+	} pv;
 };
 
 struct kvm_lpage_info {
@@ -802,8 +812,8 @@ extern u32  kvm_min_guest_tsc_khz;
 extern u32  kvm_max_guest_tsc_khz;
 
 enum emulation_result {
-	EMULATE_DONE,       /* no further processing */
-	EMULATE_DO_MMIO,      /* kvm_run filled with mmio request */
+	EMULATE_DONE,         /* no further processing */
+	EMULATE_USER_EXIT,    /* kvm_run ready for userspace exit */
 	EMULATE_FAIL,         /* can't emulate this instruction */
 };
 
diff --git a/arch/x86/include/asm/kvm_para.h b/arch/x86/include/asm/kvm_para.h
index 695399f..1df1159 100644
--- a/arch/x86/include/asm/kvm_para.h
+++ b/arch/x86/include/asm/kvm_para.h
@@ -85,26 +85,20 @@ static inline long kvm_hypercall4(unsigned int nr, unsigned long p1,
 	return ret;
 }
 
-static inline bool kvm_para_available(void)
+static inline uint32_t kvm_cpuid_base(void)
 {
-	unsigned int eax, ebx, ecx, edx;
-	char signature[13];
-
 	if (boot_cpu_data.cpuid_level < 0)
-		return false;	/* So we don't blow up on old processors */
+		return 0;	/* So we don't blow up on old processors */
 
-	if (cpu_has_hypervisor) {
-		cpuid(KVM_CPUID_SIGNATURE, &eax, &ebx, &ecx, &edx);
-		memcpy(signature + 0, &ebx, 4);
-		memcpy(signature + 4, &ecx, 4);
-		memcpy(signature + 8, &edx, 4);
-		signature[12] = 0;
+	if (cpu_has_hypervisor)
+		return hypervisor_cpuid_base("KVMKVMKVM\0\0\0", 0);
 
-		if (strcmp(signature, "KVMKVMKVM") == 0)
-			return true;
-	}
+	return 0;
+}
 
-	return false;
+static inline bool kvm_para_available(void)
+{
+	return kvm_cpuid_base() != 0;
 }
 
 static inline unsigned int kvm_arch_para_features(void)
@@ -118,10 +112,20 @@ void kvm_async_pf_task_wait(u32 token);
 void kvm_async_pf_task_wake(u32 token);
 u32 kvm_read_and_reset_pf_reason(void);
 extern void kvm_disable_steal_time(void);
-#else
-#define kvm_guest_init() do { } while (0)
+
+#ifdef CONFIG_PARAVIRT_SPINLOCKS
+void __init kvm_spinlock_init(void);
+#else /* !CONFIG_PARAVIRT_SPINLOCKS */
+static inline void kvm_spinlock_init(void)
+{
+}
+#endif /* CONFIG_PARAVIRT_SPINLOCKS */
+
+#else /* CONFIG_KVM_GUEST */
+#define kvm_guest_init() do {} while (0)
 #define kvm_async_pf_task_wait(T) do {} while(0)
 #define kvm_async_pf_task_wake(T) do {} while(0)
+
 static inline u32 kvm_read_and_reset_pf_reason(void)
 {
 	return 0;
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 29e3093..cbe6b9e 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -32,11 +32,20 @@
 #define MCI_STATUS_PCC   (1ULL<<57)  /* processor context corrupt */
 #define MCI_STATUS_S	 (1ULL<<56)  /* Signaled machine check */
 #define MCI_STATUS_AR	 (1ULL<<55)  /* Action required */
-#define MCACOD		  0xffff     /* MCA Error Code */
+
+/*
+ * Note that the full MCACOD field of IA32_MCi_STATUS MSR is
+ * bits 15:0.  But bit 12 is the 'F' bit, defined for corrected
+ * errors to indicate that errors are being filtered by hardware.
+ * We should mask out bit 12 when looking for specific signatures
+ * of uncorrected errors - so the F bit is deliberately skipped
+ * in this #define.
+ */
+#define MCACOD		  0xefff     /* MCA Error Code */
 
 /* Architecturally defined codes from SDM Vol. 3B Chapter 15 */
 #define MCACOD_SCRUB	0x00C0	/* 0xC0-0xCF Memory Scrubbing */
-#define MCACOD_SCRUBMSK	0xfff0
+#define MCACOD_SCRUBMSK	0xeff0	/* Skip bit 12 ('F' bit) */
 #define MCACOD_L3WB	0x017A	/* L3 Explicit Writeback */
 #define MCACOD_DATA	0x0134	/* Data Load */
 #define MCACOD_INSTR	0x0150	/* Instruction Fetch */
@@ -188,6 +197,9 @@ extern void register_mce_write_callback(ssize_t (*)(struct file *filp,
 				    const char __user *ubuf,
 				    size_t usize, loff_t *off));
 
+/* Disable CMCI/polling for MCA bank claimed by firmware */
+extern void mce_disable_bank(int bank);
+
 /*
  * Exception handler
  */
diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h
index cdbf367..be12c53 100644
--- a/arch/x86/include/asm/mmu_context.h
+++ b/arch/x86/include/asm/mmu_context.h
@@ -45,22 +45,28 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 		/* Re-load page tables */
 		load_cr3(next->pgd);
 
-		/* stop flush ipis for the previous mm */
+		/* Stop flush ipis for the previous mm */
 		cpumask_clear_cpu(cpu, mm_cpumask(prev));
 
-		/*
-		 * load the LDT, if the LDT is different:
-		 */
+		/* Load the LDT, if the LDT is different: */
 		if (unlikely(prev->context.ldt != next->context.ldt))
 			load_LDT_nolock(&next->context);
 	}
 #ifdef CONFIG_SMP
-	else {
+	  else {
 		this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK);
 		BUG_ON(this_cpu_read(cpu_tlbstate.active_mm) != next);
 
-		if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next))) {
-			/* We were in lazy tlb mode and leave_mm disabled
+		if (!cpumask_test_cpu(cpu, mm_cpumask(next))) {
+			/*
+			 * On established mms, the mm_cpumask is only changed
+			 * from irq context, from ptep_clear_flush() while in
+			 * lazy tlb mode, and here. Irqs are blocked during
+			 * schedule, protecting us from simultaneous changes.
+			 */
+			cpumask_set_cpu(cpu, mm_cpumask(next));
+			/*
+			 * We were in lazy tlb mode and leave_mm disabled
 			 * tlb flush IPI delivery. We must reload CR3
 			 * to make sure to use no freed page tables.
 			 */
diff --git a/arch/x86/include/asm/mutex_64.h b/arch/x86/include/asm/mutex_64.h
index 2c543ff..07537a4 100644
--- a/arch/x86/include/asm/mutex_64.h
+++ b/arch/x86/include/asm/mutex_64.h
@@ -16,6 +16,20 @@
  *
  * Atomically decrements @v and calls <fail_fn> if the result is negative.
  */
+#ifdef CC_HAVE_ASM_GOTO
+static inline void __mutex_fastpath_lock(atomic_t *v,
+					 void (*fail_fn)(atomic_t *))
+{
+	asm_volatile_goto(LOCK_PREFIX "   decl %0\n"
+			  "   jns %l[exit]\n"
+			  : : "m" (v->counter)
+			  : "memory", "cc"
+			  : exit);
+	fail_fn(v);
+exit:
+	return;
+}
+#else
 #define __mutex_fastpath_lock(v, fail_fn)			\
 do {								\
 	unsigned long dummy;					\
@@ -32,6 +46,7 @@ do {								\
 		     : "rax", "rsi", "rdx", "rcx",		\
 		       "r8", "r9", "r10", "r11", "memory");	\
 } while (0)
+#endif
 
 /**
  *  __mutex_fastpath_lock_retval - try to take the lock by moving the count
@@ -56,6 +71,20 @@ static inline int __mutex_fastpath_lock_retval(atomic_t *count)
  *
  * Atomically increments @v and calls <fail_fn> if the result is nonpositive.
  */
+#ifdef CC_HAVE_ASM_GOTO
+static inline void __mutex_fastpath_unlock(atomic_t *v,
+					   void (*fail_fn)(atomic_t *))
+{
+	asm_volatile_goto(LOCK_PREFIX "   incl %0\n"
+			  "   jg %l[exit]\n"
+			  : : "m" (v->counter)
+			  : "memory", "cc"
+			  : exit);
+	fail_fn(v);
+exit:
+	return;
+}
+#else
 #define __mutex_fastpath_unlock(v, fail_fn)			\
 do {								\
 	unsigned long dummy;					\
@@ -72,6 +101,7 @@ do {								\
 		     : "rax", "rsi", "rdx", "rcx",		\
 		       "r8", "r9", "r10", "r11", "memory");	\
 } while (0)
+#endif
 
 #define __mutex_slowpath_needs_to_unlock()	1
 
diff --git a/arch/x86/include/asm/page_32_types.h b/arch/x86/include/asm/page_32_types.h
index ef17af0..f48b17d 100644
--- a/arch/x86/include/asm/page_32_types.h
+++ b/arch/x86/include/asm/page_32_types.h
@@ -15,6 +15,8 @@
  */
 #define __PAGE_OFFSET		_AC(CONFIG_PAGE_OFFSET, UL)
 
+#define __START_KERNEL_map	__PAGE_OFFSET
+
 #define THREAD_SIZE_ORDER	1
 #define THREAD_SIZE		(PAGE_SIZE << THREAD_SIZE_ORDER)
 
diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h
index 6c896fb..43dcd80 100644
--- a/arch/x86/include/asm/page_64_types.h
+++ b/arch/x86/include/asm/page_64_types.h
@@ -32,11 +32,6 @@
  */
 #define __PAGE_OFFSET           _AC(0xffff880000000000, UL)
 
-#define __PHYSICAL_START	((CONFIG_PHYSICAL_START +	 	\
-				  (CONFIG_PHYSICAL_ALIGN - 1)) &	\
-				 ~(CONFIG_PHYSICAL_ALIGN - 1))
-
-#define __START_KERNEL		(__START_KERNEL_map + __PHYSICAL_START)
 #define __START_KERNEL_map	_AC(0xffffffff80000000, UL)
 
 /* See Documentation/x86/x86_64/mm.txt for a description of the memory map. */
diff --git a/arch/x86/include/asm/page_types.h b/arch/x86/include/asm/page_types.h
index 54c9787..f97fbe3 100644
--- a/arch/x86/include/asm/page_types.h
+++ b/arch/x86/include/asm/page_types.h
@@ -33,6 +33,11 @@
 	(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
 	 VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
+#define __PHYSICAL_START	ALIGN(CONFIG_PHYSICAL_START, \
+				      CONFIG_PHYSICAL_ALIGN)
+
+#define __START_KERNEL		(__START_KERNEL_map + __PHYSICAL_START)
+
 #ifdef CONFIG_X86_64
 #include <asm/page_64_types.h>
 #else
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index cfdc9ee..401f350 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -712,36 +712,16 @@ static inline void __set_fixmap(unsigned /* enum fixed_addresses */ idx,
 
 #if defined(CONFIG_SMP) && defined(CONFIG_PARAVIRT_SPINLOCKS)
 
-static inline int arch_spin_is_locked(struct arch_spinlock *lock)
+static __always_inline void __ticket_lock_spinning(struct arch_spinlock *lock,
+							__ticket_t ticket)
 {
-	return PVOP_CALL1(int, pv_lock_ops.spin_is_locked, lock);
+	PVOP_VCALLEE2(pv_lock_ops.lock_spinning, lock, ticket);
 }
 
-static inline int arch_spin_is_contended(struct arch_spinlock *lock)
+static __always_inline void __ticket_unlock_kick(struct arch_spinlock *lock,
+							__ticket_t ticket)
 {
-	return PVOP_CALL1(int, pv_lock_ops.spin_is_contended, lock);
-}
-#define arch_spin_is_contended	arch_spin_is_contended
-
-static __always_inline void arch_spin_lock(struct arch_spinlock *lock)
-{
-	PVOP_VCALL1(pv_lock_ops.spin_lock, lock);
-}
-
-static __always_inline void arch_spin_lock_flags(struct arch_spinlock *lock,
-						  unsigned long flags)
-{
-	PVOP_VCALL2(pv_lock_ops.spin_lock_flags, lock, flags);
-}
-
-static __always_inline int arch_spin_trylock(struct arch_spinlock *lock)
-{
-	return PVOP_CALL1(int, pv_lock_ops.spin_trylock, lock);
-}
-
-static __always_inline void arch_spin_unlock(struct arch_spinlock *lock)
-{
-	PVOP_VCALL1(pv_lock_ops.spin_unlock, lock);
+	PVOP_VCALL2(pv_lock_ops.unlock_kick, lock, ticket);
 }
 
 #endif
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
index 0db1fca..aab8f67 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -327,13 +327,15 @@ struct pv_mmu_ops {
 };
 
 struct arch_spinlock;
+#ifdef CONFIG_SMP
+#include <asm/spinlock_types.h>
+#else
+typedef u16 __ticket_t;
+#endif
+
 struct pv_lock_ops {
-	int (*spin_is_locked)(struct arch_spinlock *lock);
-	int (*spin_is_contended)(struct arch_spinlock *lock);
-	void (*spin_lock)(struct arch_spinlock *lock);
-	void (*spin_lock_flags)(struct arch_spinlock *lock, unsigned long flags);
-	int (*spin_trylock)(struct arch_spinlock *lock);
-	void (*spin_unlock)(struct arch_spinlock *lock);
+	struct paravirt_callee_save lock_spinning;
+	void (*unlock_kick)(struct arch_spinlock *lock, __ticket_t ticket);
 };
 
 /* This contains all the paravirt structures: we get a convenient
@@ -387,7 +389,8 @@ extern struct pv_lock_ops pv_lock_ops;
 
 /* Simple instruction patching code. */
 #define DEF_NATIVE(ops, name, code) 					\
-	extern const char start_##ops##_##name[], end_##ops##_##name[];	\
+	extern const char start_##ops##_##name[] __visible,		\
+			  end_##ops##_##name[] __visible;		\
 	asm("start_" #ops "_" #name ": " code "; end_" #ops "_" #name ":")
 
 unsigned paravirt_patch_nop(void);
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index d9e9e6c..7d74432 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -100,29 +100,6 @@ static inline void early_quirks(void) { }
 extern void pci_iommu_alloc(void);
 
 #ifdef CONFIG_PCI_MSI
-/* MSI arch specific hooks */
-static inline int x86_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
-{
-	return x86_msi.setup_msi_irqs(dev, nvec, type);
-}
-
-static inline void x86_teardown_msi_irqs(struct pci_dev *dev)
-{
-	x86_msi.teardown_msi_irqs(dev);
-}
-
-static inline void x86_teardown_msi_irq(unsigned int irq)
-{
-	x86_msi.teardown_msi_irq(irq);
-}
-static inline void x86_restore_msi_irqs(struct pci_dev *dev, int irq)
-{
-	x86_msi.restore_msi_irqs(dev, irq);
-}
-#define arch_setup_msi_irqs x86_setup_msi_irqs
-#define arch_teardown_msi_irqs x86_teardown_msi_irqs
-#define arch_teardown_msi_irq x86_teardown_msi_irq
-#define arch_restore_msi_irqs x86_restore_msi_irqs
 /* implemented in arch/x86/kernel/apic/io_apic. */
 struct msi_desc;
 int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
@@ -130,16 +107,9 @@ void native_teardown_msi_irq(unsigned int irq);
 void native_restore_msi_irqs(struct pci_dev *dev, int irq);
 int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 		  unsigned int irq_base, unsigned int irq_offset);
-/* default to the implementation in drivers/lib/msi.c */
-#define HAVE_DEFAULT_MSI_TEARDOWN_IRQS
-#define HAVE_DEFAULT_MSI_RESTORE_IRQS
-void default_teardown_msi_irqs(struct pci_dev *dev);
-void default_restore_msi_irqs(struct pci_dev *dev, int irq);
 #else
 #define native_setup_msi_irqs		NULL
 #define native_teardown_msi_irq		NULL
-#define default_teardown_msi_irqs	NULL
-#define default_restore_msi_irqs	NULL
 #endif
 
 #define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 0da5200..b3e18f8 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -128,7 +128,8 @@ do {							\
 do {									\
 	typedef typeof(var) pao_T__;					\
 	const int pao_ID__ = (__builtin_constant_p(val) &&		\
-			      ((val) == 1 || (val) == -1)) ? (val) : 0;	\
+			      ((val) == 1 || (val) == -1)) ?		\
+				(int)(val) : 0;				\
 	if (0) {							\
 		pao_T__ pao_tmp__;					\
 		pao_tmp__ = (val);					\
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 1c00631..3d19994 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -22,7 +22,8 @@
  * ZERO_PAGE is a global shared page that is always zero: used
  * for zero-mapped memory areas etc..
  */
-extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
+extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]
+	__visible;
 #define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
 
 extern spinlock_t pgd_lock;
@@ -314,21 +315,6 @@ static inline pmd_t pmd_mksoft_dirty(pmd_t pmd)
 	return pmd_set_flags(pmd, _PAGE_SOFT_DIRTY);
 }
 
-static inline pte_t pte_swp_mksoft_dirty(pte_t pte)
-{
-	return pte_set_flags(pte, _PAGE_SWP_SOFT_DIRTY);
-}
-
-static inline int pte_swp_soft_dirty(pte_t pte)
-{
-	return pte_flags(pte) & _PAGE_SWP_SOFT_DIRTY;
-}
-
-static inline pte_t pte_swp_clear_soft_dirty(pte_t pte)
-{
-	return pte_clear_flags(pte, _PAGE_SWP_SOFT_DIRTY);
-}
-
 static inline pte_t pte_file_clear_soft_dirty(pte_t pte)
 {
 	return pte_clear_flags(pte, _PAGE_SOFT_DIRTY);
@@ -445,6 +431,7 @@ pte_t *populate_extra_pte(unsigned long vaddr);
 
 #ifndef __ASSEMBLY__
 #include <linux/mm_types.h>
+#include <linux/mmdebug.h>
 #include <linux/log2.h>
 
 static inline int pte_none(pte_t pte)
@@ -863,6 +850,24 @@ static inline void update_mmu_cache_pmd(struct vm_area_struct *vma,
 {
 }
 
+static inline pte_t pte_swp_mksoft_dirty(pte_t pte)
+{
+	VM_BUG_ON(pte_present(pte));
+	return pte_set_flags(pte, _PAGE_SWP_SOFT_DIRTY);
+}
+
+static inline int pte_swp_soft_dirty(pte_t pte)
+{
+	VM_BUG_ON(pte_present(pte));
+	return pte_flags(pte) & _PAGE_SWP_SOFT_DIRTY;
+}
+
+static inline pte_t pte_swp_clear_soft_dirty(pte_t pte)
+{
+	VM_BUG_ON(pte_present(pte));
+	return pte_clear_flags(pte, _PAGE_SWP_SOFT_DIRTY);
+}
+
 #include <asm-generic/pgtable.h>
 #endif	/* __ASSEMBLY__ */
 
diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index f4843e0..0ecac25 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -75,6 +75,9 @@
  * with swap entry format. On x86 bits 6 and 7 are *not* involved
  * into swap entry computation, but bit 6 is used for nonlinear
  * file mapping, so we borrow bit 7 for soft dirty tracking.
+ *
+ * Please note that this bit must be treated as swap dirty page
+ * mark if and only if the PTE has present bit clear!
  */
 #ifdef CONFIG_MEM_SOFT_DIRTY
 #define _PAGE_SWP_SOFT_DIRTY	_PAGE_PSE
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 24cf5ae..987c75e 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -412,7 +412,7 @@ union irq_stack_union {
 	};
 };
 
-DECLARE_PER_CPU_FIRST(union irq_stack_union, irq_stack_union);
+DECLARE_PER_CPU_FIRST(union irq_stack_union, irq_stack_union) __visible;
 DECLARE_INIT_PER_CPU(irq_stack_union);
 
 DECLARE_PER_CPU(char *, irq_stack_ptr);
@@ -942,33 +942,19 @@ extern int set_tsc_mode(unsigned int val);
 
 extern u16 amd_get_nb_id(int cpu);
 
-struct aperfmperf {
-	u64 aperf, mperf;
-};
-
-static inline void get_aperfmperf(struct aperfmperf *am)
+static inline uint32_t hypervisor_cpuid_base(const char *sig, uint32_t leaves)
 {
-	WARN_ON_ONCE(!boot_cpu_has(X86_FEATURE_APERFMPERF));
-
-	rdmsrl(MSR_IA32_APERF, am->aperf);
-	rdmsrl(MSR_IA32_MPERF, am->mperf);
-}
+	uint32_t base, eax, signature[3];
 
-#define APERFMPERF_SHIFT 10
+	for (base = 0x40000000; base < 0x40010000; base += 0x100) {
+		cpuid(base, &eax, &signature[0], &signature[1], &signature[2]);
 
-static inline
-unsigned long calc_aperfmperf_ratio(struct aperfmperf *old,
-				    struct aperfmperf *new)
-{
-	u64 aperf = new->aperf - old->aperf;
-	u64 mperf = new->mperf - old->mperf;
-	unsigned long ratio = aperf;
-
-	mperf >>= APERFMPERF_SHIFT;
-	if (mperf)
-		ratio = div64_u64(aperf, mperf);
+		if (!memcmp(sig, signature, 12) &&
+		    (leaves == 0 || ((eax - base) >= leaves)))
+			return base;
+	}
 
-	return ratio;
+	return 0;
 }
 
 extern unsigned long arch_align_stack(unsigned long sp);
diff --git a/arch/x86/include/asm/pvclock.h b/arch/x86/include/asm/pvclock.h
index 109a9dd..be8269b 100644
--- a/arch/x86/include/asm/pvclock.h
+++ b/arch/x86/include/asm/pvclock.h
@@ -93,7 +93,6 @@ unsigned __pvclock_read_cycles(const struct pvclock_vcpu_time_info *src,
 
 struct pvclock_vsyscall_time_info {
 	struct pvclock_vcpu_time_info pvti;
-	u32 migrate_count;
 } __attribute__((__aligned__(SMP_CACHE_BYTES)));
 
 #define PVTI_SIZE sizeof(struct pvclock_vsyscall_time_info)
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index b7bf350..3475554 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -6,6 +6,8 @@
 
 #define COMMAND_LINE_SIZE 2048
 
+#include <linux/linkage.h>
+
 #ifdef __i386__
 
 #include <linux/pfn.h>
@@ -108,11 +110,11 @@ void *extend_brk(size_t size, size_t align);
 extern void probe_roms(void);
 #ifdef __i386__
 
-void __init i386_start_kernel(void);
+asmlinkage void __init i386_start_kernel(void);
 
 #else
-void __init x86_64_start_kernel(char *real_mode);
-void __init x86_64_start_reservations(char *real_mode_data);
+asmlinkage void __init x86_64_start_kernel(char *real_mode);
+asmlinkage void __init x86_64_start_reservations(char *real_mode_data);
 
 #endif /* __i386__ */
 #endif /* _SETUP */
diff --git a/arch/x86/include/asm/special_insns.h b/arch/x86/include/asm/special_insns.h
index 2f4d924..645cad2 100644
--- a/arch/x86/include/asm/special_insns.h
+++ b/arch/x86/include/asm/special_insns.h
@@ -101,7 +101,7 @@ static inline void native_wbinvd(void)
 	asm volatile("wbinvd": : :"memory");
 }
 
-extern void native_load_gs_index(unsigned);
+extern asmlinkage void native_load_gs_index(unsigned);
 
 #ifdef CONFIG_PARAVIRT
 #include <asm/paravirt.h>
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index e3ddd7d..bf156de 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -1,11 +1,14 @@
 #ifndef _ASM_X86_SPINLOCK_H
 #define _ASM_X86_SPINLOCK_H
 
+#include <linux/jump_label.h>
 #include <linux/atomic.h>
 #include <asm/page.h>
 #include <asm/processor.h>
 #include <linux/compiler.h>
 #include <asm/paravirt.h>
+#include <asm/bitops.h>
+
 /*
  * Your basic SMP spinlocks, allowing only a single CPU anywhere
  *
@@ -34,6 +37,36 @@
 # define UNLOCK_LOCK_PREFIX
 #endif
 
+/* How long a lock should spin before we consider blocking */
+#define SPIN_THRESHOLD	(1 << 15)
+
+extern struct static_key paravirt_ticketlocks_enabled;
+static __always_inline bool static_key_false(struct static_key *key);
+
+#ifdef CONFIG_PARAVIRT_SPINLOCKS
+
+static inline void __ticket_enter_slowpath(arch_spinlock_t *lock)
+{
+	set_bit(0, (volatile unsigned long *)&lock->tickets.tail);
+}
+
+#else  /* !CONFIG_PARAVIRT_SPINLOCKS */
+static __always_inline void __ticket_lock_spinning(arch_spinlock_t *lock,
+							__ticket_t ticket)
+{
+}
+static inline void __ticket_unlock_kick(arch_spinlock_t *lock,
+							__ticket_t ticket)
+{
+}
+
+#endif /* CONFIG_PARAVIRT_SPINLOCKS */
+
+static __always_inline int arch_spin_value_unlocked(arch_spinlock_t lock)
+{
+	return lock.tickets.head == lock.tickets.tail;
+}
+
 /*
  * Ticket locks are conceptually two parts, one indicating the current head of
  * the queue, and the other indicating the current tail. The lock is acquired
@@ -47,81 +80,101 @@
  * in the high part, because a wide xadd increment of the low part would carry
  * up and contaminate the high part.
  */
-static __always_inline void __ticket_spin_lock(arch_spinlock_t *lock)
+static __always_inline void arch_spin_lock(arch_spinlock_t *lock)
 {
-	register struct __raw_tickets inc = { .tail = 1 };
+	register struct __raw_tickets inc = { .tail = TICKET_LOCK_INC };
 
 	inc = xadd(&lock->tickets, inc);
+	if (likely(inc.head == inc.tail))
+		goto out;
 
+	inc.tail &= ~TICKET_SLOWPATH_FLAG;
 	for (;;) {
-		if (inc.head == inc.tail)
-			break;
-		cpu_relax();
-		inc.head = ACCESS_ONCE(lock->tickets.head);
+		unsigned count = SPIN_THRESHOLD;
+
+		do {
+			if (ACCESS_ONCE(lock->tickets.head) == inc.tail)
+				goto out;
+			cpu_relax();
+		} while (--count);
+		__ticket_lock_spinning(lock, inc.tail);
 	}
-	barrier();		/* make sure nothing creeps before the lock is taken */
+out:	barrier();	/* make sure nothing creeps before the lock is taken */
 }
 
-static __always_inline int __ticket_spin_trylock(arch_spinlock_t *lock)
+static __always_inline int arch_spin_trylock(arch_spinlock_t *lock)
 {
 	arch_spinlock_t old, new;
 
 	old.tickets = ACCESS_ONCE(lock->tickets);
-	if (old.tickets.head != old.tickets.tail)
+	if (old.tickets.head != (old.tickets.tail & ~TICKET_SLOWPATH_FLAG))
 		return 0;
 
-	new.head_tail = old.head_tail + (1 << TICKET_SHIFT);
+	new.head_tail = old.head_tail + (TICKET_LOCK_INC << TICKET_SHIFT);
 
 	/* cmpxchg is a full barrier, so nothing can move before it */
 	return cmpxchg(&lock->head_tail, old.head_tail, new.head_tail) == old.head_tail;
 }
 
-static __always_inline void __ticket_spin_unlock(arch_spinlock_t *lock)
+static inline void __ticket_unlock_slowpath(arch_spinlock_t *lock,
+					    arch_spinlock_t old)
 {
-	__add(&lock->tickets.head, 1, UNLOCK_LOCK_PREFIX);
+	arch_spinlock_t new;
+
+	BUILD_BUG_ON(((__ticket_t)NR_CPUS) != NR_CPUS);
+
+	/* Perform the unlock on the "before" copy */
+	old.tickets.head += TICKET_LOCK_INC;
+
+	/* Clear the slowpath flag */
+	new.head_tail = old.head_tail & ~(TICKET_SLOWPATH_FLAG << TICKET_SHIFT);
+
+	/*
+	 * If the lock is uncontended, clear the flag - use cmpxchg in
+	 * case it changes behind our back though.
+	 */
+	if (new.tickets.head != new.tickets.tail ||
+	    cmpxchg(&lock->head_tail, old.head_tail,
+					new.head_tail) != old.head_tail) {
+		/*
+		 * Lock still has someone queued for it, so wake up an
+		 * appropriate waiter.
+		 */
+		__ticket_unlock_kick(lock, old.tickets.head);
+	}
 }
 
-static inline int __ticket_spin_is_locked(arch_spinlock_t *lock)
+static __always_inline void arch_spin_unlock(arch_spinlock_t *lock)
 {
-	struct __raw_tickets tmp = ACCESS_ONCE(lock->tickets);
+	if (TICKET_SLOWPATH_FLAG &&
+	    static_key_false(&paravirt_ticketlocks_enabled)) {
+		arch_spinlock_t prev;
 
-	return tmp.tail != tmp.head;
-}
+		prev = *lock;
+		add_smp(&lock->tickets.head, TICKET_LOCK_INC);
 
-static inline int __ticket_spin_is_contended(arch_spinlock_t *lock)
-{
-	struct __raw_tickets tmp = ACCESS_ONCE(lock->tickets);
+		/* add_smp() is a full mb() */
 
-	return (__ticket_t)(tmp.tail - tmp.head) > 1;
+		if (unlikely(lock->tickets.tail & TICKET_SLOWPATH_FLAG))
+			__ticket_unlock_slowpath(lock, prev);
+	} else
+		__add(&lock->tickets.head, TICKET_LOCK_INC, UNLOCK_LOCK_PREFIX);
 }
 
-#ifndef CONFIG_PARAVIRT_SPINLOCKS
-
 static inline int arch_spin_is_locked(arch_spinlock_t *lock)
 {
-	return __ticket_spin_is_locked(lock);
-}
-
-static inline int arch_spin_is_contended(arch_spinlock_t *lock)
-{
-	return __ticket_spin_is_contended(lock);
-}
-#define arch_spin_is_contended	arch_spin_is_contended
+	struct __raw_tickets tmp = ACCESS_ONCE(lock->tickets);
 
-static __always_inline void arch_spin_lock(arch_spinlock_t *lock)
-{
-	__ticket_spin_lock(lock);
+	return tmp.tail != tmp.head;
 }
 
-static __always_inline int arch_spin_trylock(arch_spinlock_t *lock)
+static inline int arch_spin_is_contended(arch_spinlock_t *lock)
 {
-	return __ticket_spin_trylock(lock);
-}
+	struct __raw_tickets tmp = ACCESS_ONCE(lock->tickets);
 
-static __always_inline void arch_spin_unlock(arch_spinlock_t *lock)
-{
-	__ticket_spin_unlock(lock);
+	return (__ticket_t)(tmp.tail - tmp.head) > TICKET_LOCK_INC;
 }
+#define arch_spin_is_contended	arch_spin_is_contended
 
 static __always_inline void arch_spin_lock_flags(arch_spinlock_t *lock,
 						  unsigned long flags)
@@ -129,8 +182,6 @@ static __always_inline void arch_spin_lock_flags(arch_spinlock_t *lock,
 	arch_spin_lock(lock);
 }
 
-#endif	/* CONFIG_PARAVIRT_SPINLOCKS */
-
 static inline void arch_spin_unlock_wait(arch_spinlock_t *lock)
 {
 	while (arch_spin_is_locked(lock))
diff --git a/arch/x86/include/asm/spinlock_types.h b/arch/x86/include/asm/spinlock_types.h
index ad0ad07..4f1bea1 100644
--- a/arch/x86/include/asm/spinlock_types.h
+++ b/arch/x86/include/asm/spinlock_types.h
@@ -1,13 +1,17 @@
 #ifndef _ASM_X86_SPINLOCK_TYPES_H
 #define _ASM_X86_SPINLOCK_TYPES_H
 
-#ifndef __LINUX_SPINLOCK_TYPES_H
-# error "please don't include this file directly"
-#endif
-
 #include <linux/types.h>
 
-#if (CONFIG_NR_CPUS < 256)
+#ifdef CONFIG_PARAVIRT_SPINLOCKS
+#define __TICKET_LOCK_INC	2
+#define TICKET_SLOWPATH_FLAG	((__ticket_t)1)
+#else
+#define __TICKET_LOCK_INC	1
+#define TICKET_SLOWPATH_FLAG	((__ticket_t)0)
+#endif
+
+#if (CONFIG_NR_CPUS < (256 / __TICKET_LOCK_INC))
 typedef u8  __ticket_t;
 typedef u16 __ticketpair_t;
 #else
@@ -15,6 +19,8 @@ typedef u16 __ticket_t;
 typedef u32 __ticketpair_t;
 #endif
 
+#define TICKET_LOCK_INC	((__ticket_t)__TICKET_LOCK_INC)
+
 #define TICKET_SHIFT	(sizeof(__ticket_t) * 8)
 
 typedef struct arch_spinlock {
diff --git a/arch/x86/include/asm/switch_to.h b/arch/x86/include/asm/switch_to.h
index 4ec45b3..d7f3b3b 100644
--- a/arch/x86/include/asm/switch_to.h
+++ b/arch/x86/include/asm/switch_to.h
@@ -2,8 +2,8 @@
 #define _ASM_X86_SWITCH_TO_H
 
 struct task_struct; /* one of the stranger aspects of C forward declarations */
-struct task_struct *__switch_to(struct task_struct *prev,
-				struct task_struct *next);
+__visible struct task_struct *__switch_to(struct task_struct *prev,
+					   struct task_struct *next);
 struct tss_struct;
 void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
 		      struct tss_struct *tss);
diff --git a/arch/x86/include/asm/sync_bitops.h b/arch/x86/include/asm/sync_bitops.h
index 9d09b40..05af3b3 100644
--- a/arch/x86/include/asm/sync_bitops.h
+++ b/arch/x86/include/asm/sync_bitops.h
@@ -26,9 +26,9 @@
  * Note that @nr may be almost arbitrarily large; this function is not
  * restricted to acting on a single-word quantity.
  */
-static inline void sync_set_bit(int nr, volatile unsigned long *addr)
+static inline void sync_set_bit(long nr, volatile unsigned long *addr)
 {
-	asm volatile("lock; btsl %1,%0"
+	asm volatile("lock; bts %1,%0"
 		     : "+m" (ADDR)
 		     : "Ir" (nr)
 		     : "memory");
@@ -44,9 +44,9 @@ static inline void sync_set_bit(int nr, volatile unsigned long *addr)
  * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
  * in order to ensure changes are visible on other processors.
  */
-static inline void sync_clear_bit(int nr, volatile unsigned long *addr)
+static inline void sync_clear_bit(long nr, volatile unsigned long *addr)
 {
-	asm volatile("lock; btrl %1,%0"
+	asm volatile("lock; btr %1,%0"
 		     : "+m" (ADDR)
 		     : "Ir" (nr)
 		     : "memory");
@@ -61,9 +61,9 @@ static inline void sync_clear_bit(int nr, volatile unsigned long *addr)
  * Note that @nr may be almost arbitrarily large; this function is not
  * restricted to acting on a single-word quantity.
  */
-static inline void sync_change_bit(int nr, volatile unsigned long *addr)
+static inline void sync_change_bit(long nr, volatile unsigned long *addr)
 {
-	asm volatile("lock; btcl %1,%0"
+	asm volatile("lock; btc %1,%0"
 		     : "+m" (ADDR)
 		     : "Ir" (nr)
 		     : "memory");
@@ -77,11 +77,11 @@ static inline void sync_change_bit(int nr, volatile unsigned long *addr)
  * This operation is atomic and cannot be reordered.
  * It also implies a memory barrier.
  */
-static inline int sync_test_and_set_bit(int nr, volatile unsigned long *addr)
+static inline int sync_test_and_set_bit(long nr, volatile unsigned long *addr)
 {
 	int oldbit;
 
-	asm volatile("lock; btsl %2,%1\n\tsbbl %0,%0"
+	asm volatile("lock; bts %2,%1\n\tsbbl %0,%0"
 		     : "=r" (oldbit), "+m" (ADDR)
 		     : "Ir" (nr) : "memory");
 	return oldbit;
@@ -95,11 +95,11 @@ static inline int sync_test_and_set_bit(int nr, volatile unsigned long *addr)
  * This operation is atomic and cannot be reordered.
  * It also implies a memory barrier.
  */
-static inline int sync_test_and_clear_bit(int nr, volatile unsigned long *addr)
+static inline int sync_test_and_clear_bit(long nr, volatile unsigned long *addr)
 {
 	int oldbit;
 
-	asm volatile("lock; btrl %2,%1\n\tsbbl %0,%0"
+	asm volatile("lock; btr %2,%1\n\tsbbl %0,%0"
 		     : "=r" (oldbit), "+m" (ADDR)
 		     : "Ir" (nr) : "memory");
 	return oldbit;
@@ -113,11 +113,11 @@ static inline int sync_test_and_clear_bit(int nr, volatile unsigned long *addr)
  * This operation is atomic and cannot be reordered.
  * It also implies a memory barrier.
  */
-static inline int sync_test_and_change_bit(int nr, volatile unsigned long *addr)
+static inline int sync_test_and_change_bit(long nr, volatile unsigned long *addr)
 {
 	int oldbit;
 
-	asm volatile("lock; btcl %2,%1\n\tsbbl %0,%0"
+	asm volatile("lock; btc %2,%1\n\tsbbl %0,%0"
 		     : "=r" (oldbit), "+m" (ADDR)
 		     : "Ir" (nr) : "memory");
 	return oldbit;
diff --git a/arch/x86/include/asm/syscall.h b/arch/x86/include/asm/syscall.h
index 2e188d6..aea284b 100644
--- a/arch/x86/include/asm/syscall.h
+++ b/arch/x86/include/asm/syscall.h
@@ -20,7 +20,8 @@
 #include <asm/thread_info.h>	/* for TS_COMPAT */
 #include <asm/unistd.h>
 
-extern const unsigned long sys_call_table[];
+typedef void (*sys_call_ptr_t)(void);
+extern const sys_call_ptr_t sys_call_table[];
 
 /*
  * Only the low 32 bits of orig_ax are meaningful, so we return int.
diff --git a/arch/x86/include/asm/syscalls.h b/arch/x86/include/asm/syscalls.h
index 2917a64..592a6a6 100644
--- a/arch/x86/include/asm/syscalls.h
+++ b/arch/x86/include/asm/syscalls.h
@@ -24,7 +24,7 @@ asmlinkage long sys_iopl(unsigned int);
 asmlinkage int sys_modify_ldt(int, void __user *, unsigned long);
 
 /* kernel/signal.c */
-long sys_rt_sigreturn(void);
+asmlinkage long sys_rt_sigreturn(void);
 
 /* kernel/tls.c */
 asmlinkage long sys_set_thread_area(struct user_desc __user *);
@@ -34,7 +34,7 @@ asmlinkage long sys_get_thread_area(struct user_desc __user *);
 #ifdef CONFIG_X86_32
 
 /* kernel/signal.c */
-unsigned long sys_sigreturn(void);
+asmlinkage unsigned long sys_sigreturn(void);
 
 /* kernel/vm86_32.c */
 asmlinkage long sys_vm86old(struct vm86_struct __user *);
@@ -44,7 +44,7 @@ asmlinkage long sys_vm86(unsigned long, unsigned long);
 
 /* X86_64 only */
 /* kernel/process_64.c */
-long sys_arch_prctl(int, unsigned long);
+asmlinkage long sys_arch_prctl(int, unsigned long);
 
 /* kernel/sys_x86_64.c */
 asmlinkage long sys_mmap(unsigned long, unsigned long, unsigned long,
diff --git a/arch/x86/include/asm/sysfb.h b/arch/x86/include/asm/sysfb.h
new file mode 100644
index 0000000..2aeb3e2
--- /dev/null
+++ b/arch/x86/include/asm/sysfb.h
@@ -0,0 +1,98 @@
+#ifndef _ARCH_X86_KERNEL_SYSFB_H
+#define _ARCH_X86_KERNEL_SYSFB_H
+
+/*
+ * Generic System Framebuffers on x86
+ * Copyright (c) 2012-2013 David Herrmann <dh.herrmann@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_data/simplefb.h>
+#include <linux/screen_info.h>
+
+enum {
+	M_I17,		/* 17-Inch iMac */
+	M_I20,		/* 20-Inch iMac */
+	M_I20_SR,	/* 20-Inch iMac (Santa Rosa) */
+	M_I24,		/* 24-Inch iMac */
+	M_I24_8_1,	/* 24-Inch iMac, 8,1th gen */
+	M_I24_10_1,	/* 24-Inch iMac, 10,1th gen */
+	M_I27_11_1,	/* 27-Inch iMac, 11,1th gen */
+	M_MINI,		/* Mac Mini */
+	M_MINI_3_1,	/* Mac Mini, 3,1th gen */
+	M_MINI_4_1,	/* Mac Mini, 4,1th gen */
+	M_MB,		/* MacBook */
+	M_MB_2,		/* MacBook, 2nd rev. */
+	M_MB_3,		/* MacBook, 3rd rev. */
+	M_MB_5_1,	/* MacBook, 5th rev. */
+	M_MB_6_1,	/* MacBook, 6th rev. */
+	M_MB_7_1,	/* MacBook, 7th rev. */
+	M_MB_SR,	/* MacBook, 2nd gen, (Santa Rosa) */
+	M_MBA,		/* MacBook Air */
+	M_MBA_3,	/* Macbook Air, 3rd rev */
+	M_MBP,		/* MacBook Pro */
+	M_MBP_2,	/* MacBook Pro 2nd gen */
+	M_MBP_2_2,	/* MacBook Pro 2,2nd gen */
+	M_MBP_SR,	/* MacBook Pro (Santa Rosa) */
+	M_MBP_4,	/* MacBook Pro, 4th gen */
+	M_MBP_5_1,	/* MacBook Pro, 5,1th gen */
+	M_MBP_5_2,	/* MacBook Pro, 5,2th gen */
+	M_MBP_5_3,	/* MacBook Pro, 5,3rd gen */
+	M_MBP_6_1,	/* MacBook Pro, 6,1th gen */
+	M_MBP_6_2,	/* MacBook Pro, 6,2th gen */
+	M_MBP_7_1,	/* MacBook Pro, 7,1th gen */
+	M_MBP_8_2,	/* MacBook Pro, 8,2nd gen */
+	M_UNKNOWN	/* placeholder */
+};
+
+struct efifb_dmi_info {
+	char *optname;
+	unsigned long base;
+	int stride;
+	int width;
+	int height;
+	int flags;
+};
+
+#ifdef CONFIG_EFI
+
+extern struct efifb_dmi_info efifb_dmi_list[];
+void sysfb_apply_efi_quirks(void);
+
+#else /* CONFIG_EFI */
+
+static inline void sysfb_apply_efi_quirks(void)
+{
+}
+
+#endif /* CONFIG_EFI */
+
+#ifdef CONFIG_X86_SYSFB
+
+bool parse_mode(const struct screen_info *si,
+		struct simplefb_platform_data *mode);
+int create_simplefb(const struct screen_info *si,
+		    const struct simplefb_platform_data *mode);
+
+#else /* CONFIG_X86_SYSFB */
+
+static inline bool parse_mode(const struct screen_info *si,
+			      struct simplefb_platform_data *mode)
+{
+	return false;
+}
+
+static inline int create_simplefb(const struct screen_info *si,
+				  const struct simplefb_platform_data *mode)
+{
+	return -EINVAL;
+}
+
+#endif /* CONFIG_X86_SYSFB */
+
+#endif /* _ARCH_X86_KERNEL_SYSFB_H */
diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h
index cf51200..e6d90ba 100644
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -62,6 +62,7 @@ static inline void __flush_tlb_all(void)
 
 static inline void __flush_tlb_one(unsigned long addr)
 {
+	count_vm_event(NR_TLB_LOCAL_FLUSH_ONE);
 	__flush_tlb_single(addr);
 }
 
@@ -84,14 +85,38 @@ static inline void __flush_tlb_one(unsigned long addr)
 
 #ifndef CONFIG_SMP
 
-#define flush_tlb() __flush_tlb()
-#define flush_tlb_all() __flush_tlb_all()
-#define local_flush_tlb() __flush_tlb()
+/* "_up" is for UniProcessor.
+ *
+ * This is a helper for other header functions.  *Not* intended to be called
+ * directly.  All global TLB flushes need to either call this, or to bump the
+ * vm statistics themselves.
+ */
+static inline void __flush_tlb_up(void)
+{
+	count_vm_event(NR_TLB_LOCAL_FLUSH_ALL);
+	__flush_tlb();
+}
+
+static inline void flush_tlb_all(void)
+{
+	count_vm_event(NR_TLB_LOCAL_FLUSH_ALL);
+	__flush_tlb_all();
+}
+
+static inline void flush_tlb(void)
+{
+	__flush_tlb_up();
+}
+
+static inline void local_flush_tlb(void)
+{
+	__flush_tlb_up();
+}
 
 static inline void flush_tlb_mm(struct mm_struct *mm)
 {
 	if (mm == current->active_mm)
-		__flush_tlb();
+		__flush_tlb_up();
 }
 
 static inline void flush_tlb_page(struct vm_area_struct *vma,
@@ -105,14 +130,14 @@ static inline void flush_tlb_range(struct vm_area_struct *vma,
 				   unsigned long start, unsigned long end)
 {
 	if (vma->vm_mm == current->active_mm)
-		__flush_tlb();
+		__flush_tlb_up();
 }
 
 static inline void flush_tlb_mm_range(struct mm_struct *mm,
 	   unsigned long start, unsigned long end, unsigned long vmflag)
 {
 	if (mm == current->active_mm)
-		__flush_tlb();
+		__flush_tlb_up();
 }
 
 static inline void native_flush_tlb_others(const struct cpumask *cpumask,
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 095b215..d35f24e 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -124,9 +124,6 @@ extern const struct cpumask *cpu_coregroup_mask(int cpu);
 #define topology_core_id(cpu)			(cpu_data(cpu).cpu_core_id)
 #define topology_core_cpumask(cpu)		(per_cpu(cpu_core_map, cpu))
 #define topology_thread_cpumask(cpu)		(per_cpu(cpu_sibling_map, cpu))
-
-/* indicates that pointers to the topology cpumask_t maps are valid */
-#define arch_provides_topology_pointers		yes
 #endif
 
 static inline void arch_fix_phys_package_id(int num, u32 slot)
diff --git a/arch/x86/include/asm/traps.h b/arch/x86/include/asm/traps.h
index 88eae2a..7036cb6 100644
--- a/arch/x86/include/asm/traps.h
+++ b/arch/x86/include/asm/traps.h
@@ -6,11 +6,7 @@
 #include <asm/debugreg.h>
 #include <asm/siginfo.h>			/* TRAP_TRACE, ... */
 
-#ifdef CONFIG_X86_32
-#define dotraplinkage
-#else
-#define dotraplinkage asmlinkage
-#endif
+#define dotraplinkage __visible
 
 asmlinkage void divide_error(void);
 asmlinkage void debug(void);
diff --git a/arch/x86/include/asm/tsc.h b/arch/x86/include/asm/tsc.h
index c91e8b9..235be70 100644
--- a/arch/x86/include/asm/tsc.h
+++ b/arch/x86/include/asm/tsc.h
@@ -49,6 +49,7 @@ extern void tsc_init(void);
 extern void mark_tsc_unstable(char *reason);
 extern int unsynchronized_tsc(void);
 extern int check_tsc_unstable(void);
+extern int check_tsc_disabled(void);
 extern unsigned long native_calibrate_tsc(void);
 
 extern int tsc_clocksource_reliable;
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index 5ee2687..5838fa9 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -153,16 +153,19 @@ __typeof__(__builtin_choose_expr(sizeof(x) > sizeof(0UL), 0ULL, 0UL))
  * Careful: we have to cast the result to the type of the pointer
  * for sign reasons.
  *
- * The use of %edx as the register specifier is a bit of a
+ * The use of _ASM_DX as the register specifier is a bit of a
  * simplification, as gcc only cares about it as the starting point
  * and not size: for a 64-bit value it will use %ecx:%edx on 32 bits
  * (%ecx being the next register in gcc's x86 register sequence), and
  * %rdx on 64 bits.
+ *
+ * Clang/LLVM cares about the size of the register, but still wants
+ * the base register for something that ends up being a pair.
  */
 #define get_user(x, ptr)						\
 ({									\
 	int __ret_gu;							\
-	register __inttype(*(ptr)) __val_gu asm("%edx");		\
+	register __inttype(*(ptr)) __val_gu asm("%"_ASM_DX);		\
 	__chk_user_ptr(ptr);						\
 	might_fault();							\
 	asm volatile("call __get_user_%P3"				\
diff --git a/arch/x86/include/asm/vmx.h b/arch/x86/include/asm/vmx.h
index f3e01a2..966502d 100644
--- a/arch/x86/include/asm/vmx.h
+++ b/arch/x86/include/asm/vmx.h
@@ -387,6 +387,7 @@ enum vmcs_field {
 #define VMX_EPT_EXTENT_INDIVIDUAL_ADDR		0
 #define VMX_EPT_EXTENT_CONTEXT			1
 #define VMX_EPT_EXTENT_GLOBAL			2
+#define VMX_EPT_EXTENT_SHIFT			24
 
 #define VMX_EPT_EXECUTE_ONLY_BIT		(1ull)
 #define VMX_EPT_PAGE_WALK_4_BIT			(1ull << 6)
@@ -394,6 +395,7 @@ enum vmcs_field {
 #define VMX_EPTP_WB_BIT				(1ull << 14)
 #define VMX_EPT_2MB_PAGE_BIT			(1ull << 16)
 #define VMX_EPT_1GB_PAGE_BIT			(1ull << 17)
+#define VMX_EPT_INVEPT_BIT			(1ull << 20)
 #define VMX_EPT_AD_BIT				    (1ull << 21)
 #define VMX_EPT_EXTENT_CONTEXT_BIT		(1ull << 25)
 #define VMX_EPT_EXTENT_GLOBAL_BIT		(1ull << 26)
diff --git a/arch/x86/include/asm/vvar.h b/arch/x86/include/asm/vvar.h
index de656ac..d76ac40 100644
--- a/arch/x86/include/asm/vvar.h
+++ b/arch/x86/include/asm/vvar.h
@@ -35,7 +35,7 @@
 
 #define DEFINE_VVAR(type, name)						\
 	type name							\
-	__attribute__((section(".vvar_" #name), aligned(16)))
+	__attribute__((section(".vvar_" #name), aligned(16))) __visible
 
 #define VVAR(name) (*vvaraddr_ ## name)
 
diff --git a/arch/x86/include/asm/xen/events.h b/arch/x86/include/asm/xen/events.h
index ca842f2..608a79d 100644
--- a/arch/x86/include/asm/xen/events.h
+++ b/arch/x86/include/asm/xen/events.h
@@ -7,6 +7,7 @@ enum ipi_vector {
 	XEN_CALL_FUNCTION_SINGLE_VECTOR,
 	XEN_SPIN_UNLOCK_VECTOR,
 	XEN_IRQ_WORK_VECTOR,
+	XEN_NMI_VECTOR,
 
 	XEN_NR_IPIS,
 };
diff --git a/arch/x86/include/asm/xen/hypervisor.h b/arch/x86/include/asm/xen/hypervisor.h
index 125f344..d866959 100644
--- a/arch/x86/include/asm/xen/hypervisor.h
+++ b/arch/x86/include/asm/xen/hypervisor.h
@@ -40,21 +40,7 @@ extern struct start_info *xen_start_info;
 
 static inline uint32_t xen_cpuid_base(void)
 {
-	uint32_t base, eax, ebx, ecx, edx;
-	char signature[13];
-
-	for (base = 0x40000000; base < 0x40010000; base += 0x100) {
-		cpuid(base, &eax, &ebx, &ecx, &edx);
-		*(uint32_t *)(signature + 0) = ebx;
-		*(uint32_t *)(signature + 4) = ecx;
-		*(uint32_t *)(signature + 8) = edx;
-		signature[12] = 0;
-
-		if (!strcmp("XenVMMXenVMM", signature) && ((eax - base) >= 2))
-			return base;
-	}
-
-	return 0;
+	return hypervisor_cpuid_base("XenVMMXenVMM", 2);
 }
 
 #ifdef CONFIG_XEN
diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h
index 6aef9fb..b913915 100644
--- a/arch/x86/include/asm/xen/page.h
+++ b/arch/x86/include/asm/xen/page.h
@@ -79,30 +79,38 @@ static inline int phys_to_machine_mapping_valid(unsigned long pfn)
 	return get_phys_to_machine(pfn) != INVALID_P2M_ENTRY;
 }
 
-static inline unsigned long mfn_to_pfn(unsigned long mfn)
+static inline unsigned long mfn_to_pfn_no_overrides(unsigned long mfn)
 {
 	unsigned long pfn;
-	int ret = 0;
+	int ret;
 
 	if (xen_feature(XENFEAT_auto_translated_physmap))
 		return mfn;
 
-	if (unlikely(mfn >= machine_to_phys_nr)) {
-		pfn = ~0;
-		goto try_override;
-	}
-	pfn = 0;
+	if (unlikely(mfn >= machine_to_phys_nr))
+		return ~0;
+
 	/*
 	 * The array access can fail (e.g., device space beyond end of RAM).
 	 * In such cases it doesn't matter what we return (we return garbage),
 	 * but we must handle the fault without crashing!
 	 */
 	ret = __get_user(pfn, &machine_to_phys_mapping[mfn]);
-try_override:
-	/* ret might be < 0 if there are no entries in the m2p for mfn */
 	if (ret < 0)
-		pfn = ~0;
-	else if (get_phys_to_machine(pfn) != mfn)
+		return ~0;
+
+	return pfn;
+}
+
+static inline unsigned long mfn_to_pfn(unsigned long mfn)
+{
+	unsigned long pfn;
+
+	if (xen_feature(XENFEAT_auto_translated_physmap))
+		return mfn;
+
+	pfn = mfn_to_pfn_no_overrides(mfn);
+	if (get_phys_to_machine(pfn) != mfn) {
 		/*
 		 * If this appears to be a foreign mfn (because the pfn
 		 * doesn't map back to the mfn), then check the local override
@@ -111,6 +119,7 @@ try_override:
 		 * m2p_find_override_pfn returns ~0 if it doesn't find anything.
 		 */
 		pfn = m2p_find_override_pfn(mfn, ~0);
+	}
 
 	/* 
 	 * pfn is ~0 if there are no entries in the m2p for mfn or if the
diff --git a/arch/x86/include/asm/xor_avx.h b/arch/x86/include/asm/xor_avx.h
index 7ea79c5..492b298 100644
--- a/arch/x86/include/asm/xor_avx.h
+++ b/arch/x86/include/asm/xor_avx.h
@@ -167,12 +167,12 @@ static struct xor_block_template xor_block_avx = {
 
 #define AVX_XOR_SPEED \
 do { \
-	if (cpu_has_avx) \
+	if (cpu_has_avx && cpu_has_osxsave) \
 		xor_speed(&xor_block_avx); \
 } while (0)
 
 #define AVX_SELECT(FASTEST) \
-	(cpu_has_avx ? &xor_block_avx : FASTEST)
+	(cpu_has_avx && cpu_has_osxsave ? &xor_block_avx : FASTEST)
 
 #else
 
diff --git a/arch/x86/include/uapi/asm/kvm_para.h b/arch/x86/include/uapi/asm/kvm_para.h
index 06fdbd9..94dc8ca 100644
--- a/arch/x86/include/uapi/asm/kvm_para.h
+++ b/arch/x86/include/uapi/asm/kvm_para.h
@@ -23,6 +23,7 @@
 #define KVM_FEATURE_ASYNC_PF		4
 #define KVM_FEATURE_STEAL_TIME		5
 #define KVM_FEATURE_PV_EOI		6
+#define KVM_FEATURE_PV_UNHALT		7
 
 /* The last 8 bits are used to indicate how to interpret the flags field
  * in pvclock structure. If no bits are set, all flags are ignored.
diff --git a/arch/x86/include/uapi/asm/vmx.h b/arch/x86/include/uapi/asm/vmx.h
index d651082..0e79420 100644
--- a/arch/x86/include/uapi/asm/vmx.h
+++ b/arch/x86/include/uapi/asm/vmx.h
@@ -65,6 +65,7 @@
 #define EXIT_REASON_EOI_INDUCED         45
 #define EXIT_REASON_EPT_VIOLATION       48
 #define EXIT_REASON_EPT_MISCONFIG       49
+#define EXIT_REASON_INVEPT              50
 #define EXIT_REASON_PREEMPTION_TIMER    52
 #define EXIT_REASON_WBINVD              54
 #define EXIT_REASON_XSETBV              55
@@ -106,12 +107,13 @@
 	{ EXIT_REASON_APIC_ACCESS,           "APIC_ACCESS" }, \
 	{ EXIT_REASON_EPT_VIOLATION,         "EPT_VIOLATION" }, \
 	{ EXIT_REASON_EPT_MISCONFIG,         "EPT_MISCONFIG" }, \
+	{ EXIT_REASON_INVEPT,                "INVEPT" }, \
+	{ EXIT_REASON_PREEMPTION_TIMER,      "PREEMPTION_TIMER" }, \
 	{ EXIT_REASON_WBINVD,                "WBINVD" }, \
 	{ EXIT_REASON_APIC_WRITE,            "APIC_WRITE" }, \
 	{ EXIT_REASON_EOI_INDUCED,           "EOI_INDUCED" }, \
 	{ EXIT_REASON_INVALID_STATE,         "INVALID_STATE" }, \
 	{ EXIT_REASON_INVD,                  "INVD" }, \
-	{ EXIT_REASON_INVPCID,               "INVPCID" }, \
-	{ EXIT_REASON_PREEMPTION_TIMER,      "PREEMPTION_TIMER" }
+	{ EXIT_REASON_INVPCID,               "INVPCID" }
 
 #endif /* _UAPIVMX_H */
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 88d99ea..a5408b9 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -103,6 +103,9 @@ obj-$(CONFIG_X86_CHECK_BIOS_CORRUPTION) += check.o
 obj-$(CONFIG_SWIOTLB)			+= pci-swiotlb.o
 obj-$(CONFIG_OF)			+= devicetree.o
 obj-$(CONFIG_UPROBES)			+= uprobes.o
+obj-y					+= sysfb.o
+obj-$(CONFIG_X86_SYSFB)			+= sysfb_simplefb.o
+obj-$(CONFIG_EFI)			+= sysfb_efi.o
 
 obj-$(CONFIG_PERF_EVENTS)		+= perf_regs.o
 obj-$(CONFIG_TRACING)			+= tracepoint.o
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 2627a81..40c7660 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -67,6 +67,7 @@ EXPORT_SYMBOL(acpi_pci_disabled);
 int acpi_lapic;
 int acpi_ioapic;
 int acpi_strict;
+int acpi_disable_cmcff;
 
 u8 acpi_sci_flags __initdata;
 int acpi_sci_override_gsi __initdata;
@@ -141,16 +142,8 @@ static u32 irq_to_gsi(int irq)
 }
 
 /*
- * Temporarily use the virtual area starting from FIX_IO_APIC_BASE_END,
- * to map the target physical address. The problem is that set_fixmap()
- * provides a single page, and it is possible that the page is not
- * sufficient.
- * By using this area, we can map up to MAX_IO_APICS pages temporarily,
- * i.e. until the next __va_range() call.
- *
- * Important Safety Note:  The fixed I/O APIC page numbers are *subtracted*
- * from the fixed base.  That's why we start at FIX_IO_APIC_BASE_END and
- * count idx down while incrementing the phys address.
+ * This is just a simple wrapper around early_ioremap(),
+ * with sanity checks for phys == 0 and size == 0.
  */
 char *__init __acpi_map_table(unsigned long phys, unsigned long size)
 {
@@ -160,6 +153,7 @@ char *__init __acpi_map_table(unsigned long phys, unsigned long size)
 
 	return early_ioremap(phys, size);
 }
+
 void __init __acpi_unmap_table(char *map, unsigned long size)
 {
 	if (!map || !size)
@@ -199,7 +193,7 @@ static void acpi_register_lapic(int id, u8 enabled)
 {
 	unsigned int ver = 0;
 
-	if (id >= (MAX_LOCAL_APIC-1)) {
+	if (id >= MAX_LOCAL_APIC) {
 		printk(KERN_INFO PREFIX "skipped apicid that is too big\n");
 		return;
 	}
@@ -1120,6 +1114,7 @@ int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
 	int ioapic;
 	int ioapic_pin;
 	struct io_apic_irq_attr irq_attr;
+	int ret;
 
 	if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
 		return gsi;
@@ -1149,7 +1144,9 @@ int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
 	set_io_apic_irq_attr(&irq_attr, ioapic, ioapic_pin,
 			     trigger == ACPI_EDGE_SENSITIVE ? 0 : 1,
 			     polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
-	io_apic_set_pci_routing(dev, gsi_to_irq(gsi), &irq_attr);
+	ret = io_apic_set_pci_routing(dev, gsi_to_irq(gsi), &irq_attr);
+	if (ret < 0)
+		gsi = INT_MIN;
 
 	return gsi;
 }
@@ -1626,6 +1623,10 @@ static int __init parse_acpi(char *arg)
 	/* "acpi=copy_dsdt" copys DSDT */
 	else if (strcmp(arg, "copy_dsdt") == 0) {
 		acpi_gbl_copy_dsdt_locally = 1;
+	}
+	/* "acpi=nocmcff" disables FF mode for corrected errors */
+	else if (strcmp(arg, "nocmcff") == 0) {
+		acpi_disable_cmcff = 1;
 	} else {
 		/* Core will printk when we return error. */
 		return -EINVAL;
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index c15cf9a..15e8563 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -11,6 +11,7 @@
 #include <linux/memory.h>
 #include <linux/stop_machine.h>
 #include <linux/slab.h>
+#include <linux/kdebug.h>
 #include <asm/alternative.h>
 #include <asm/sections.h>
 #include <asm/pgtable.h>
@@ -596,97 +597,93 @@ void *__kprobes text_poke(void *addr, const void *opcode, size_t len)
 	return addr;
 }
 
-/*
- * Cross-modifying kernel text with stop_machine().
- * This code originally comes from immediate value.
- */
-static atomic_t stop_machine_first;
-static int wrote_text;
+static void do_sync_core(void *info)
+{
+	sync_core();
+}
 
-struct text_poke_params {
-	struct text_poke_param *params;
-	int nparams;
-};
+static bool bp_patching_in_progress;
+static void *bp_int3_handler, *bp_int3_addr;
 
-static int __kprobes stop_machine_text_poke(void *data)
+int poke_int3_handler(struct pt_regs *regs)
 {
-	struct text_poke_params *tpp = data;
-	struct text_poke_param *p;
-	int i;
+	/* bp_patching_in_progress */
+	smp_rmb();
 
-	if (atomic_xchg(&stop_machine_first, 0)) {
-		for (i = 0; i < tpp->nparams; i++) {
-			p = &tpp->params[i];
-			text_poke(p->addr, p->opcode, p->len);
-		}
-		smp_wmb();	/* Make sure other cpus see that this has run */
-		wrote_text = 1;
-	} else {
-		while (!wrote_text)
-			cpu_relax();
-		smp_mb();	/* Load wrote_text before following execution */
-	}
+	if (likely(!bp_patching_in_progress))
+		return 0;
 
-	for (i = 0; i < tpp->nparams; i++) {
-		p = &tpp->params[i];
-		flush_icache_range((unsigned long)p->addr,
-				   (unsigned long)p->addr + p->len);
-	}
-	/*
-	 * Intel Archiecture Software Developer's Manual section 7.1.3 specifies
-	 * that a core serializing instruction such as "cpuid" should be
-	 * executed on _each_ core before the new instruction is made visible.
-	 */
-	sync_core();
-	return 0;
-}
+	if (user_mode_vm(regs) || regs->ip != (unsigned long)bp_int3_addr)
+		return 0;
+
+	/* set up the specified breakpoint handler */
+	regs->ip = (unsigned long) bp_int3_handler;
+
+	return 1;
 
-/**
- * text_poke_smp - Update instructions on a live kernel on SMP
- * @addr: address to modify
- * @opcode: source of the copy
- * @len: length to copy
- *
- * Modify multi-byte instruction by using stop_machine() on SMP. This allows
- * user to poke/set multi-byte text on SMP. Only non-NMI/MCE code modifying
- * should be allowed, since stop_machine() does _not_ protect code against
- * NMI and MCE.
- *
- * Note: Must be called under get_online_cpus() and text_mutex.
- */
-void *__kprobes text_poke_smp(void *addr, const void *opcode, size_t len)
-{
-	struct text_poke_params tpp;
-	struct text_poke_param p;
-
-	p.addr = addr;
-	p.opcode = opcode;
-	p.len = len;
-	tpp.params = &p;
-	tpp.nparams = 1;
-	atomic_set(&stop_machine_first, 1);
-	wrote_text = 0;
-	/* Use __stop_machine() because the caller already got online_cpus. */
-	__stop_machine(stop_machine_text_poke, (void *)&tpp, cpu_online_mask);
-	return addr;
 }
 
 /**
- * text_poke_smp_batch - Update instructions on a live kernel on SMP
- * @params: an array of text_poke parameters
- * @n: the number of elements in params.
+ * text_poke_bp() -- update instructions on live kernel on SMP
+ * @addr:	address to patch
+ * @opcode:	opcode of new instruction
+ * @len:	length to copy
+ * @handler:	address to jump to when the temporary breakpoint is hit
  *
- * Modify multi-byte instruction by using stop_machine() on SMP. Since the
- * stop_machine() is heavy task, it is better to aggregate text_poke requests
- * and do it once if possible.
+ * Modify multi-byte instruction by using int3 breakpoint on SMP.
+ * We completely avoid stop_machine() here, and achieve the
+ * synchronization using int3 breakpoint.
  *
- * Note: Must be called under get_online_cpus() and text_mutex.
+ * The way it is done:
+ *	- add a int3 trap to the address that will be patched
+ *	- sync cores
+ *	- update all but the first byte of the patched range
+ *	- sync cores
+ *	- replace the first byte (int3) by the first byte of
+ *	  replacing opcode
+ *	- sync cores
+ *
+ * Note: must be called under text_mutex.
  */
-void __kprobes text_poke_smp_batch(struct text_poke_param *params, int n)
+void *text_poke_bp(void *addr, const void *opcode, size_t len, void *handler)
 {
-	struct text_poke_params tpp = {.params = params, .nparams = n};
+	unsigned char int3 = 0xcc;
+
+	bp_int3_handler = handler;
+	bp_int3_addr = (u8 *)addr + sizeof(int3);
+	bp_patching_in_progress = true;
+	/*
+	 * Corresponding read barrier in int3 notifier for
+	 * making sure the in_progress flags is correctly ordered wrt.
+	 * patching
+	 */
+	smp_wmb();
+
+	text_poke(addr, &int3, sizeof(int3));
 
-	atomic_set(&stop_machine_first, 1);
-	wrote_text = 0;
-	__stop_machine(stop_machine_text_poke, (void *)&tpp, cpu_online_mask);
+	on_each_cpu(do_sync_core, NULL, 1);
+
+	if (len - sizeof(int3) > 0) {
+		/* patch all but the first byte */
+		text_poke((char *)addr + sizeof(int3),
+			  (const char *) opcode + sizeof(int3),
+			  len - sizeof(int3));
+		/*
+		 * According to Intel, this core syncing is very likely
+		 * not necessary and we'd be safe even without it. But
+		 * better safe than sorry (plus there's not only Intel).
+		 */
+		on_each_cpu(do_sync_core, NULL, 1);
+	}
+
+	/* patch the first byte */
+	text_poke(addr, opcode, sizeof(int3));
+
+	on_each_cpu(do_sync_core, NULL, 1);
+
+	bp_patching_in_progress = false;
+	smp_wmb();
+
+	return addr;
 }
+
diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c
index 3048ded..59554dc 100644
--- a/arch/x86/kernel/amd_nb.c
+++ b/arch/x86/kernel/amd_nb.c
@@ -20,6 +20,7 @@ const struct pci_device_id amd_nb_misc_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_M10H_F3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) },
 	{}
 };
@@ -27,6 +28,7 @@ EXPORT_SYMBOL(amd_nb_misc_ids);
 
 static const struct pci_device_id amd_nb_link_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F4) },
 	{}
 };
@@ -81,13 +83,20 @@ int amd_cache_northbridges(void)
 			next_northbridge(misc, amd_nb_misc_ids);
 		node_to_amd_nb(i)->link = link =
 			next_northbridge(link, amd_nb_link_ids);
-        }
+	}
 
+	/* GART present only on Fam15h upto model 0fh */
 	if (boot_cpu_data.x86 == 0xf || boot_cpu_data.x86 == 0x10 ||
-	    boot_cpu_data.x86 == 0x15)
+	    (boot_cpu_data.x86 == 0x15 && boot_cpu_data.x86_model < 0x10))
 		amd_northbridges.flags |= AMD_NB_GART;
 
 	/*
+	 * Check for L3 cache presence.
+	 */
+	if (!cpuid_edx(0x80000006))
+		return 0;
+
+	/*
 	 * Some CPU families support L3 Cache Index Disable. There are some
 	 * limitations because of E382 and E388 on family 0x10.
 	 */
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index eca89c5..a7eb82d 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -913,7 +913,7 @@ static void local_apic_timer_interrupt(void)
  * [ if a single-CPU system runs an SMP kernel then we call the local
  *   interrupt as well. Thus we cannot inline the local irq ... ]
  */
-void __irq_entry smp_apic_timer_interrupt(struct pt_regs *regs)
+__visible void __irq_entry smp_apic_timer_interrupt(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
 
@@ -932,7 +932,7 @@ void __irq_entry smp_apic_timer_interrupt(struct pt_regs *regs)
 	set_irq_regs(old_regs);
 }
 
-void __irq_entry smp_trace_apic_timer_interrupt(struct pt_regs *regs)
+__visible void __irq_entry smp_trace_apic_timer_interrupt(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
 
@@ -1946,14 +1946,14 @@ static inline void __smp_spurious_interrupt(void)
 		"should never happen.\n", smp_processor_id());
 }
 
-void smp_spurious_interrupt(struct pt_regs *regs)
+__visible void smp_spurious_interrupt(struct pt_regs *regs)
 {
 	entering_irq();
 	__smp_spurious_interrupt();
 	exiting_irq();
 }
 
-void smp_trace_spurious_interrupt(struct pt_regs *regs)
+__visible void smp_trace_spurious_interrupt(struct pt_regs *regs)
 {
 	entering_irq();
 	trace_spurious_apic_entry(SPURIOUS_APIC_VECTOR);
@@ -2002,14 +2002,14 @@ static inline void __smp_error_interrupt(struct pt_regs *regs)
 
 }
 
-void smp_error_interrupt(struct pt_regs *regs)
+__visible void smp_error_interrupt(struct pt_regs *regs)
 {
 	entering_irq();
 	__smp_error_interrupt(regs);
 	exiting_irq();
 }
 
-void smp_trace_error_interrupt(struct pt_regs *regs)
+__visible void smp_trace_error_interrupt(struct pt_regs *regs)
 {
 	entering_irq();
 	trace_error_apic_entry(ERROR_APIC_VECTOR);
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 9ed796c..e63a5bd 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1534,6 +1534,11 @@ void intel_ir_io_apic_print_entries(unsigned int apic,
 	}
 }
 
+void ioapic_zap_locks(void)
+{
+	raw_spin_lock_init(&ioapic_lock);
+}
+
 __apicdebuginit(void) print_IO_APIC(int ioapic_idx)
 {
 	union IO_APIC_reg_00 reg_00;
@@ -3375,12 +3380,15 @@ int io_apic_setup_irq_pin_once(unsigned int irq, int node,
 {
 	unsigned int ioapic_idx = attr->ioapic, pin = attr->ioapic_pin;
 	int ret;
+	struct IO_APIC_route_entry orig_entry;
 
 	/* Avoid redundant programming */
 	if (test_bit(pin, ioapics[ioapic_idx].pin_programmed)) {
-		pr_debug("Pin %d-%d already programmed\n",
-			 mpc_ioapic_id(ioapic_idx), pin);
-		return 0;
+		pr_debug("Pin %d-%d already programmed\n", mpc_ioapic_id(ioapic_idx), pin);
+		orig_entry = ioapic_read_entry(attr->ioapic, pin);
+		if (attr->trigger == orig_entry.trigger && attr->polarity == orig_entry.polarity)
+			return 0;
+		return -EBUSY;
 	}
 	ret = io_apic_setup_irq_pin(irq, node, attr);
 	if (!ret)
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 1191ac1..a419814 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -113,7 +113,7 @@ static int __init early_get_pnodeid(void)
 		break;
 	case UV3_HUB_PART_NUMBER:
 	case UV3_HUB_PART_NUMBER_X:
-		uv_min_hub_revision_id += UV3_HUB_REVISION_BASE - 1;
+		uv_min_hub_revision_id += UV3_HUB_REVISION_BASE;
 		break;
 	}
 
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 53a4e27..3ab0343 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -392,7 +392,7 @@ static struct cpuidle_device apm_cpuidle_device;
 /*
  * Local variables
  */
-static struct {
+__visible struct {
 	unsigned long	offset;
 	unsigned short	segment;
 } apm_bios_entry;
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 08a0890..903a264 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -66,8 +66,8 @@ static inline int wrmsrl_amd_safe(unsigned msr, unsigned long long val)
  *	performance at the same time..
  */
 
-extern void vide(void);
-__asm__(".align 4\nvide: ret");
+extern __visible void vide(void);
+__asm__(".globl vide\n\t.align 4\nvide: ret");
 
 static void init_amd_k5(struct cpuinfo_x86 *c)
 {
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 25eb274..2793d1f 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1076,7 +1076,7 @@ struct desc_ptr debug_idt_descr = { NR_VECTORS * 16 - 1,
 				    (unsigned long) debug_idt_table };
 
 DEFINE_PER_CPU_FIRST(union irq_stack_union,
-		     irq_stack_union) __aligned(PAGE_SIZE);
+		     irq_stack_union) __aligned(PAGE_SIZE) __visible;
 
 /*
  * The following four percpu variables are hot.  Align current_task to
@@ -1093,7 +1093,7 @@ EXPORT_PER_CPU_SYMBOL(kernel_stack);
 DEFINE_PER_CPU(char *, irq_stack_ptr) =
 	init_per_cpu_var(irq_stack_union.irq_stack) + IRQ_STACK_SIZE - 64;
 
-DEFINE_PER_CPU(unsigned int, irq_count) = -1;
+DEFINE_PER_CPU(unsigned int, irq_count) __visible = -1;
 
 DEFINE_PER_CPU(struct task_struct *, fpu_owner_task);
 
diff --git a/arch/x86/kernel/cpu/hypervisor.c b/arch/x86/kernel/cpu/hypervisor.c
index 8727921..36ce402 100644
--- a/arch/x86/kernel/cpu/hypervisor.c
+++ b/arch/x86/kernel/cpu/hypervisor.c
@@ -25,11 +25,6 @@
 #include <asm/processor.h>
 #include <asm/hypervisor.h>
 
-/*
- * Hypervisor detect order.  This is specified explicitly here because
- * some hypervisors might implement compatibility modes for other
- * hypervisors and therefore need to be detected in specific sequence.
- */
 static const __initconst struct hypervisor_x86 * const hypervisors[] =
 {
 #ifdef CONFIG_XEN_PVHVM
@@ -49,15 +44,19 @@ static inline void __init
 detect_hypervisor_vendor(void)
 {
 	const struct hypervisor_x86 *h, * const *p;
+	uint32_t pri, max_pri = 0;
 
 	for (p = hypervisors; p < hypervisors + ARRAY_SIZE(hypervisors); p++) {
 		h = *p;
-		if (h->detect()) {
+		pri = h->detect();
+		if (pri != 0 && pri > max_pri) {
+			max_pri = pri;
 			x86_hyper = h;
-			printk(KERN_INFO "Hypervisor detected: %s\n", h->name);
-			break;
 		}
 	}
+
+	if (max_pri)
+		printk(KERN_INFO "Hypervisor detected: %s\n", x86_hyper->name);
 }
 
 void init_hypervisor(struct cpuinfo_x86 *c)
diff --git a/arch/x86/kernel/cpu/mcheck/mce-internal.h b/arch/x86/kernel/cpu/mcheck/mce-internal.h
index 5b7d4fa..09edd0b 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-internal.h
+++ b/arch/x86/kernel/cpu/mcheck/mce-internal.h
@@ -25,15 +25,18 @@ int mce_severity(struct mce *a, int tolerant, char **msg);
 struct dentry *mce_get_debugfs_dir(void);
 
 extern struct mce_bank *mce_banks;
+extern mce_banks_t mce_banks_ce_disabled;
 
 #ifdef CONFIG_X86_MCE_INTEL
 unsigned long mce_intel_adjust_timer(unsigned long interval);
 void mce_intel_cmci_poll(void);
 void mce_intel_hcpu_update(unsigned long cpu);
+void cmci_disable_bank(int bank);
 #else
 # define mce_intel_adjust_timer mce_adjust_timer_default
 static inline void mce_intel_cmci_poll(void) { }
 static inline void mce_intel_hcpu_update(unsigned long cpu) { }
+static inline void cmci_disable_bank(int bank) { }
 #endif
 
 void mce_timer_kick(unsigned long interval);
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 87a65c9..b3218cd 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -97,6 +97,15 @@ DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = {
 	[0 ... BITS_TO_LONGS(MAX_NR_BANKS)-1] = ~0UL
 };
 
+/*
+ * MCA banks controlled through firmware first for corrected errors.
+ * This is a global list of banks for which we won't enable CMCI and we
+ * won't poll. Firmware controls these banks and is responsible for
+ * reporting corrected errors through GHES. Uncorrected/recoverable
+ * errors are still notified through a machine check.
+ */
+mce_banks_t mce_banks_ce_disabled;
+
 static DEFINE_PER_CPU(struct work_struct, mce_work);
 
 static void (*quirk_no_way_out)(int bank, struct mce *m, struct pt_regs *regs);
@@ -1935,6 +1944,25 @@ static struct miscdevice mce_chrdev_device = {
 	&mce_chrdev_ops,
 };
 
+static void __mce_disable_bank(void *arg)
+{
+	int bank = *((int *)arg);
+	__clear_bit(bank, __get_cpu_var(mce_poll_banks));
+	cmci_disable_bank(bank);
+}
+
+void mce_disable_bank(int bank)
+{
+	if (bank >= mca_cfg.banks) {
+		pr_warn(FW_BUG
+			"Ignoring request to disable invalid MCA bank %d.\n",
+			bank);
+		return;
+	}
+	set_bit(bank, mce_banks_ce_disabled);
+	on_each_cpu(__mce_disable_bank, &bank, 1);
+}
+
 /*
  * mce=off Disables machine check
  * mce=no_cmci Disables CMCI
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c
index d5640530..4cfe045 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c
@@ -203,6 +203,10 @@ static void cmci_discover(int banks)
 		if (test_bit(i, owned))
 			continue;
 
+		/* Skip banks in firmware first mode */
+		if (test_bit(i, mce_banks_ce_disabled))
+			continue;
+
 		rdmsrl(MSR_IA32_MCx_CTL2(i), val);
 
 		/* Already owned by someone else? */
@@ -271,6 +275,19 @@ void cmci_recheck(void)
 	local_irq_restore(flags);
 }
 
+/* Caller must hold the lock on cmci_discover_lock */
+static void __cmci_disable_bank(int bank)
+{
+	u64 val;
+
+	if (!test_bit(bank, __get_cpu_var(mce_banks_owned)))
+		return;
+	rdmsrl(MSR_IA32_MCx_CTL2(bank), val);
+	val &= ~MCI_CTL2_CMCI_EN;
+	wrmsrl(MSR_IA32_MCx_CTL2(bank), val);
+	__clear_bit(bank, __get_cpu_var(mce_banks_owned));
+}
+
 /*
  * Disable CMCI on this CPU for all banks it owns when it goes down.
  * This allows other CPUs to claim the banks on rediscovery.
@@ -280,20 +297,12 @@ void cmci_clear(void)
 	unsigned long flags;
 	int i;
 	int banks;
-	u64 val;
 
 	if (!cmci_supported(&banks))
 		return;
 	raw_spin_lock_irqsave(&cmci_discover_lock, flags);
-	for (i = 0; i < banks; i++) {
-		if (!test_bit(i, __get_cpu_var(mce_banks_owned)))
-			continue;
-		/* Disable CMCI */
-		rdmsrl(MSR_IA32_MCx_CTL2(i), val);
-		val &= ~MCI_CTL2_CMCI_EN;
-		wrmsrl(MSR_IA32_MCx_CTL2(i), val);
-		__clear_bit(i, __get_cpu_var(mce_banks_owned));
-	}
+	for (i = 0; i < banks; i++)
+		__cmci_disable_bank(i);
 	raw_spin_unlock_irqrestore(&cmci_discover_lock, flags);
 }
 
@@ -327,6 +336,19 @@ void cmci_reenable(void)
 		cmci_discover(banks);
 }
 
+void cmci_disable_bank(int bank)
+{
+	int banks;
+	unsigned long flags;
+
+	if (!cmci_supported(&banks))
+		return;
+
+	raw_spin_lock_irqsave(&cmci_discover_lock, flags);
+	__cmci_disable_bank(bank);
+	raw_spin_unlock_irqrestore(&cmci_discover_lock, flags);
+}
+
 static void intel_init_cmci(void)
 {
 	int banks;
diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
index 8f4be53..71a39f3 100644
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -27,20 +27,23 @@
 struct ms_hyperv_info ms_hyperv;
 EXPORT_SYMBOL_GPL(ms_hyperv);
 
-static bool __init ms_hyperv_platform(void)
+static uint32_t  __init ms_hyperv_platform(void)
 {
 	u32 eax;
 	u32 hyp_signature[3];
 
 	if (!boot_cpu_has(X86_FEATURE_HYPERVISOR))
-		return false;
+		return 0;
 
 	cpuid(HYPERV_CPUID_VENDOR_AND_MAX_FUNCTIONS,
 	      &eax, &hyp_signature[0], &hyp_signature[1], &hyp_signature[2]);
 
-	return eax >= HYPERV_CPUID_MIN &&
-		eax <= HYPERV_CPUID_MAX &&
-		!memcmp("Microsoft Hv", hyp_signature, 12);
+	if (eax >= HYPERV_CPUID_MIN &&
+	    eax <= HYPERV_CPUID_MAX &&
+	    !memcmp("Microsoft Hv", hyp_signature, 12))
+		return HYPERV_CPUID_VENDOR_AND_MAX_FUNCTIONS;
+
+	return 0;
 }
 
 static cycle_t read_hv_clock(struct clocksource *arg)
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index d4cdfa6..ce2d0a2 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -683,6 +683,7 @@ static void prepare_set(void) __acquires(set_atomicity_lock)
 	}
 
 	/* Flush all TLBs via a mov %cr3, %reg; mov %reg, %cr3 */
+	count_vm_event(NR_TLB_LOCAL_FLUSH_ALL);
 	__flush_tlb();
 
 	/* Save MTRR state */
@@ -696,6 +697,7 @@ static void prepare_set(void) __acquires(set_atomicity_lock)
 static void post_set(void) __releases(set_atomicity_lock)
 {
 	/* Flush TLBs (no need to flush caches - they are disabled) */
+	count_vm_event(NR_TLB_LOCAL_FLUSH_ALL);
 	__flush_tlb();
 
 	/* Intel (P6) standard MTRRs */
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index a7c7305..8a87a32 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -1276,16 +1276,16 @@ void perf_events_lapic_init(void)
 static int __kprobes
 perf_event_nmi_handler(unsigned int cmd, struct pt_regs *regs)
 {
-	int ret;
 	u64 start_clock;
 	u64 finish_clock;
+	int ret;
 
 	if (!atomic_read(&active_events))
 		return NMI_DONE;
 
-	start_clock = local_clock();
+	start_clock = sched_clock();
 	ret = x86_pmu.handle_irq(regs);
-	finish_clock = local_clock();
+	finish_clock = sched_clock();
 
 	perf_sample_event_took(finish_clock - start_clock);
 
@@ -1506,7 +1506,7 @@ static int __init init_hw_perf_events(void)
 		err = amd_pmu_init();
 		break;
 	default:
-		return 0;
+		err = -ENOTSUPP;
 	}
 	if (err != 0) {
 		pr_cont("no PMU driver, software events only.\n");
@@ -1883,20 +1883,21 @@ static struct pmu pmu = {
 
 void arch_perf_update_userpage(struct perf_event_mmap_page *userpg, u64 now)
 {
-	userpg->cap_usr_time = 0;
-	userpg->cap_usr_rdpmc = x86_pmu.attr_rdpmc;
+	userpg->cap_user_time = 0;
+	userpg->cap_user_time_zero = 0;
+	userpg->cap_user_rdpmc = x86_pmu.attr_rdpmc;
 	userpg->pmc_width = x86_pmu.cntval_bits;
 
-	if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
+	if (!sched_clock_stable)
 		return;
 
-	if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
-		return;
-
-	userpg->cap_usr_time = 1;
+	userpg->cap_user_time = 1;
 	userpg->time_mult = this_cpu_read(cyc2ns);
 	userpg->time_shift = CYC2NS_SCALE_FACTOR;
 	userpg->time_offset = this_cpu_read(cyc2ns_offset) - now;
+
+	userpg->cap_user_time_zero = 1;
+	userpg->time_zero = this_cpu_read(cyc2ns_offset);
 }
 
 /*
diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h
index 97e557b..cc16faa 100644
--- a/arch/x86/kernel/cpu/perf_event.h
+++ b/arch/x86/kernel/cpu/perf_event.h
@@ -641,6 +641,8 @@ extern struct event_constraint intel_core2_pebs_event_constraints[];
 
 extern struct event_constraint intel_atom_pebs_event_constraints[];
 
+extern struct event_constraint intel_slm_pebs_event_constraints[];
+
 extern struct event_constraint intel_nehalem_pebs_event_constraints[];
 
 extern struct event_constraint intel_westmere_pebs_event_constraints[];
diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c
index 4cbe032..beeb7cc 100644
--- a/arch/x86/kernel/cpu/perf_event_amd.c
+++ b/arch/x86/kernel/cpu/perf_event_amd.c
@@ -347,8 +347,7 @@ static struct amd_nb *amd_alloc_nb(int cpu)
 	struct amd_nb *nb;
 	int i;
 
-	nb = kmalloc_node(sizeof(struct amd_nb), GFP_KERNEL | __GFP_ZERO,
-			  cpu_to_node(cpu));
+	nb = kzalloc_node(sizeof(struct amd_nb), GFP_KERNEL, cpu_to_node(cpu));
 	if (!nb)
 		return NULL;
 
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index a45d8d4..f31a165 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -81,7 +81,8 @@ static struct event_constraint intel_nehalem_event_constraints[] __read_mostly =
 
 static struct extra_reg intel_nehalem_extra_regs[] __read_mostly =
 {
-	INTEL_EVENT_EXTRA_REG(0xb7, MSR_OFFCORE_RSP_0, 0xffff, RSP_0),
+	/* must define OFFCORE_RSP_X first, see intel_fixup_er() */
+	INTEL_UEVENT_EXTRA_REG(0x01b7, MSR_OFFCORE_RSP_0, 0xffff, RSP_0),
 	INTEL_UEVENT_PEBS_LDLAT_EXTRA_REG(0x100b),
 	EVENT_EXTRA_END
 };
@@ -123,6 +124,7 @@ static struct event_constraint intel_ivb_event_constraints[] __read_mostly =
 	INTEL_UEVENT_CONSTRAINT(0x0148, 0x4), /* L1D_PEND_MISS.PENDING */
 	INTEL_UEVENT_CONSTRAINT(0x0279, 0xf), /* IDQ.EMTPY */
 	INTEL_UEVENT_CONSTRAINT(0x019c, 0xf), /* IDQ_UOPS_NOT_DELIVERED.CORE */
+	INTEL_UEVENT_CONSTRAINT(0x02a3, 0xf), /* CYCLE_ACTIVITY.CYCLES_LDM_PENDING */
 	INTEL_UEVENT_CONSTRAINT(0x04a3, 0xf), /* CYCLE_ACTIVITY.CYCLES_NO_EXECUTE */
 	INTEL_UEVENT_CONSTRAINT(0x05a3, 0xf), /* CYCLE_ACTIVITY.STALLS_L2_PENDING */
 	INTEL_UEVENT_CONSTRAINT(0x06a3, 0xf), /* CYCLE_ACTIVITY.STALLS_LDM_PENDING */
@@ -143,8 +145,9 @@ static struct event_constraint intel_ivb_event_constraints[] __read_mostly =
 
 static struct extra_reg intel_westmere_extra_regs[] __read_mostly =
 {
-	INTEL_EVENT_EXTRA_REG(0xb7, MSR_OFFCORE_RSP_0, 0xffff, RSP_0),
-	INTEL_EVENT_EXTRA_REG(0xbb, MSR_OFFCORE_RSP_1, 0xffff, RSP_1),
+	/* must define OFFCORE_RSP_X first, see intel_fixup_er() */
+	INTEL_UEVENT_EXTRA_REG(0x01b7, MSR_OFFCORE_RSP_0, 0xffff, RSP_0),
+	INTEL_UEVENT_EXTRA_REG(0x01bb, MSR_OFFCORE_RSP_1, 0xffff, RSP_1),
 	INTEL_UEVENT_PEBS_LDLAT_EXTRA_REG(0x100b),
 	EVENT_EXTRA_END
 };
@@ -162,16 +165,27 @@ static struct event_constraint intel_gen_event_constraints[] __read_mostly =
 	EVENT_CONSTRAINT_END
 };
 
+static struct event_constraint intel_slm_event_constraints[] __read_mostly =
+{
+	FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
+	FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
+	FIXED_EVENT_CONSTRAINT(0x013c, 2), /* CPU_CLK_UNHALTED.REF */
+	FIXED_EVENT_CONSTRAINT(0x0300, 2), /* pseudo CPU_CLK_UNHALTED.REF */
+	EVENT_CONSTRAINT_END
+};
+
 static struct extra_reg intel_snb_extra_regs[] __read_mostly = {
-	INTEL_EVENT_EXTRA_REG(0xb7, MSR_OFFCORE_RSP_0, 0x3f807f8fffull, RSP_0),
-	INTEL_EVENT_EXTRA_REG(0xbb, MSR_OFFCORE_RSP_1, 0x3f807f8fffull, RSP_1),
+	/* must define OFFCORE_RSP_X first, see intel_fixup_er() */
+	INTEL_UEVENT_EXTRA_REG(0x01b7, MSR_OFFCORE_RSP_0, 0x3f807f8fffull, RSP_0),
+	INTEL_UEVENT_EXTRA_REG(0x01bb, MSR_OFFCORE_RSP_1, 0x3f807f8fffull, RSP_1),
 	INTEL_UEVENT_PEBS_LDLAT_EXTRA_REG(0x01cd),
 	EVENT_EXTRA_END
 };
 
 static struct extra_reg intel_snbep_extra_regs[] __read_mostly = {
-	INTEL_EVENT_EXTRA_REG(0xb7, MSR_OFFCORE_RSP_0, 0x3fffff8fffull, RSP_0),
-	INTEL_EVENT_EXTRA_REG(0xbb, MSR_OFFCORE_RSP_1, 0x3fffff8fffull, RSP_1),
+	/* must define OFFCORE_RSP_X first, see intel_fixup_er() */
+	INTEL_UEVENT_EXTRA_REG(0x01b7, MSR_OFFCORE_RSP_0, 0x3fffff8fffull, RSP_0),
+	INTEL_UEVENT_EXTRA_REG(0x01bb, MSR_OFFCORE_RSP_1, 0x3fffff8fffull, RSP_1),
 	INTEL_UEVENT_PEBS_LDLAT_EXTRA_REG(0x01cd),
 	EVENT_EXTRA_END
 };
@@ -882,6 +896,140 @@ static __initconst const u64 atom_hw_cache_event_ids
  },
 };
 
+static struct extra_reg intel_slm_extra_regs[] __read_mostly =
+{
+	/* must define OFFCORE_RSP_X first, see intel_fixup_er() */
+	INTEL_UEVENT_EXTRA_REG(0x01b7, MSR_OFFCORE_RSP_0, 0x768005ffffull, RSP_0),
+	INTEL_UEVENT_EXTRA_REG(0x02b7, MSR_OFFCORE_RSP_1, 0x768005ffffull, RSP_1),
+	EVENT_EXTRA_END
+};
+
+#define SLM_DMND_READ		SNB_DMND_DATA_RD
+#define SLM_DMND_WRITE		SNB_DMND_RFO
+#define SLM_DMND_PREFETCH	(SNB_PF_DATA_RD|SNB_PF_RFO)
+
+#define SLM_SNP_ANY		(SNB_SNP_NONE|SNB_SNP_MISS|SNB_NO_FWD|SNB_HITM)
+#define SLM_LLC_ACCESS		SNB_RESP_ANY
+#define SLM_LLC_MISS		(SLM_SNP_ANY|SNB_NON_DRAM)
+
+static __initconst const u64 slm_hw_cache_extra_regs
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
+{
+ [ C(LL  ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = SLM_DMND_READ|SLM_LLC_ACCESS,
+		[ C(RESULT_MISS)   ] = SLM_DMND_READ|SLM_LLC_MISS,
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = SLM_DMND_WRITE|SLM_LLC_ACCESS,
+		[ C(RESULT_MISS)   ] = SLM_DMND_WRITE|SLM_LLC_MISS,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = SLM_DMND_PREFETCH|SLM_LLC_ACCESS,
+		[ C(RESULT_MISS)   ] = SLM_DMND_PREFETCH|SLM_LLC_MISS,
+	},
+ },
+};
+
+static __initconst const u64 slm_hw_cache_event_ids
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
+{
+ [ C(L1D) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0x0104, /* LD_DCU_MISS */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(L1I ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0380, /* ICACHE.ACCESSES */
+		[ C(RESULT_MISS)   ] = 0x0280, /* ICACGE.MISSES */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(LL  ) ] = {
+	[ C(OP_READ) ] = {
+		/* OFFCORE_RESPONSE.ANY_DATA.LOCAL_CACHE */
+		[ C(RESULT_ACCESS) ] = 0x01b7,
+		/* OFFCORE_RESPONSE.ANY_DATA.ANY_LLC_MISS */
+		[ C(RESULT_MISS)   ] = 0x01b7,
+	},
+	[ C(OP_WRITE) ] = {
+		/* OFFCORE_RESPONSE.ANY_RFO.LOCAL_CACHE */
+		[ C(RESULT_ACCESS) ] = 0x01b7,
+		/* OFFCORE_RESPONSE.ANY_RFO.ANY_LLC_MISS */
+		[ C(RESULT_MISS)   ] = 0x01b7,
+	},
+	[ C(OP_PREFETCH) ] = {
+		/* OFFCORE_RESPONSE.PREFETCH.LOCAL_CACHE */
+		[ C(RESULT_ACCESS) ] = 0x01b7,
+		/* OFFCORE_RESPONSE.PREFETCH.ANY_LLC_MISS */
+		[ C(RESULT_MISS)   ] = 0x01b7,
+	},
+ },
+ [ C(DTLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0x0804, /* LD_DTLB_MISS */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(ITLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x00c0, /* INST_RETIRED.ANY_P */
+		[ C(RESULT_MISS)   ] = 0x0282, /* ITLB.MISSES */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+ [ C(BPU ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x00c4, /* BR_INST_RETIRED.ANY */
+		[ C(RESULT_MISS)   ] = 0x00c5, /* BP_INST_RETIRED.MISPRED */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+};
+
 static inline bool intel_pmu_needs_lbr_smpl(struct perf_event *event)
 {
 	/* user explicitly requested branch sampling */
@@ -1301,11 +1449,11 @@ static void intel_fixup_er(struct perf_event *event, int idx)
 
 	if (idx == EXTRA_REG_RSP_0) {
 		event->hw.config &= ~INTEL_ARCH_EVENT_MASK;
-		event->hw.config |= 0x01b7;
+		event->hw.config |= x86_pmu.extra_regs[EXTRA_REG_RSP_0].event;
 		event->hw.extra_reg.reg = MSR_OFFCORE_RSP_0;
 	} else if (idx == EXTRA_REG_RSP_1) {
 		event->hw.config &= ~INTEL_ARCH_EVENT_MASK;
-		event->hw.config |= 0x01bb;
+		event->hw.config |= x86_pmu.extra_regs[EXTRA_REG_RSP_1].event;
 		event->hw.extra_reg.reg = MSR_OFFCORE_RSP_1;
 	}
 }
@@ -2176,6 +2324,22 @@ __init int intel_pmu_init(void)
 		pr_cont("Atom events, ");
 		break;
 
+	case 55: /* Atom 22nm "Silvermont" */
+	case 77: /* Avoton "Silvermont" */
+		memcpy(hw_cache_event_ids, slm_hw_cache_event_ids,
+			sizeof(hw_cache_event_ids));
+		memcpy(hw_cache_extra_regs, slm_hw_cache_extra_regs,
+		       sizeof(hw_cache_extra_regs));
+
+		intel_pmu_lbr_init_atom();
+
+		x86_pmu.event_constraints = intel_slm_event_constraints;
+		x86_pmu.pebs_constraints = intel_slm_pebs_event_constraints;
+		x86_pmu.extra_regs = intel_slm_extra_regs;
+		x86_pmu.er_flags |= ERF_HAS_RSP_1;
+		pr_cont("Silvermont events, ");
+		break;
+
 	case 37: /* 32 nm nehalem, "Clarkdale" */
 	case 44: /* 32 nm nehalem, "Gulftown" */
 	case 47: /* 32 nm Xeon E7 */
diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c
index 3065c57..ab3ba1c 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_ds.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c
@@ -224,7 +224,7 @@ static int alloc_pebs_buffer(int cpu)
 	if (!x86_pmu.pebs)
 		return 0;
 
-	buffer = kmalloc_node(PEBS_BUFFER_SIZE, GFP_KERNEL | __GFP_ZERO, node);
+	buffer = kzalloc_node(PEBS_BUFFER_SIZE, GFP_KERNEL, node);
 	if (unlikely(!buffer))
 		return -ENOMEM;
 
@@ -262,7 +262,7 @@ static int alloc_bts_buffer(int cpu)
 	if (!x86_pmu.bts)
 		return 0;
 
-	buffer = kmalloc_node(BTS_BUFFER_SIZE, GFP_KERNEL | __GFP_ZERO, node);
+	buffer = kzalloc_node(BTS_BUFFER_SIZE, GFP_KERNEL, node);
 	if (unlikely(!buffer))
 		return -ENOMEM;
 
@@ -295,7 +295,7 @@ static int alloc_ds_buffer(int cpu)
 	int node = cpu_to_node(cpu);
 	struct debug_store *ds;
 
-	ds = kmalloc_node(sizeof(*ds), GFP_KERNEL | __GFP_ZERO, node);
+	ds = kzalloc_node(sizeof(*ds), GFP_KERNEL, node);
 	if (unlikely(!ds))
 		return -ENOMEM;
 
@@ -517,6 +517,32 @@ struct event_constraint intel_atom_pebs_event_constraints[] = {
 	EVENT_CONSTRAINT_END
 };
 
+struct event_constraint intel_slm_pebs_event_constraints[] = {
+	INTEL_UEVENT_CONSTRAINT(0x0103, 0x1), /* REHABQ.LD_BLOCK_ST_FORWARD_PS */
+	INTEL_UEVENT_CONSTRAINT(0x0803, 0x1), /* REHABQ.LD_SPLITS_PS */
+	INTEL_UEVENT_CONSTRAINT(0x0204, 0x1), /* MEM_UOPS_RETIRED.L2_HIT_LOADS_PS */
+	INTEL_UEVENT_CONSTRAINT(0x0404, 0x1), /* MEM_UOPS_RETIRED.L2_MISS_LOADS_PS */
+	INTEL_UEVENT_CONSTRAINT(0x0804, 0x1), /* MEM_UOPS_RETIRED.DTLB_MISS_LOADS_PS */
+	INTEL_UEVENT_CONSTRAINT(0x2004, 0x1), /* MEM_UOPS_RETIRED.HITM_PS */
+	INTEL_UEVENT_CONSTRAINT(0x00c0, 0x1), /* INST_RETIRED.ANY_PS */
+	INTEL_UEVENT_CONSTRAINT(0x00c4, 0x1), /* BR_INST_RETIRED.ALL_BRANCHES_PS */
+	INTEL_UEVENT_CONSTRAINT(0x7ec4, 0x1), /* BR_INST_RETIRED.JCC_PS */
+	INTEL_UEVENT_CONSTRAINT(0xbfc4, 0x1), /* BR_INST_RETIRED.FAR_BRANCH_PS */
+	INTEL_UEVENT_CONSTRAINT(0xebc4, 0x1), /* BR_INST_RETIRED.NON_RETURN_IND_PS */
+	INTEL_UEVENT_CONSTRAINT(0xf7c4, 0x1), /* BR_INST_RETIRED.RETURN_PS */
+	INTEL_UEVENT_CONSTRAINT(0xf9c4, 0x1), /* BR_INST_RETIRED.CALL_PS */
+	INTEL_UEVENT_CONSTRAINT(0xfbc4, 0x1), /* BR_INST_RETIRED.IND_CALL_PS */
+	INTEL_UEVENT_CONSTRAINT(0xfdc4, 0x1), /* BR_INST_RETIRED.REL_CALL_PS */
+	INTEL_UEVENT_CONSTRAINT(0xfec4, 0x1), /* BR_INST_RETIRED.TAKEN_JCC_PS */
+	INTEL_UEVENT_CONSTRAINT(0x00c5, 0x1), /* BR_INST_MISP_RETIRED.ALL_BRANCHES_PS */
+	INTEL_UEVENT_CONSTRAINT(0x7ec5, 0x1), /* BR_INST_MISP_RETIRED.JCC_PS */
+	INTEL_UEVENT_CONSTRAINT(0xebc5, 0x1), /* BR_INST_MISP_RETIRED.NON_RETURN_IND_PS */
+	INTEL_UEVENT_CONSTRAINT(0xf7c5, 0x1), /* BR_INST_MISP_RETIRED.RETURN_PS */
+	INTEL_UEVENT_CONSTRAINT(0xfbc5, 0x1), /* BR_INST_MISP_RETIRED.IND_CALL_PS */
+	INTEL_UEVENT_CONSTRAINT(0xfec5, 0x1), /* BR_INST_MISP_RETIRED.TAKEN_JCC_PS */
+	EVENT_CONSTRAINT_END
+};
+
 struct event_constraint intel_nehalem_pebs_event_constraints[] = {
 	INTEL_PLD_CONSTRAINT(0x100b, 0xf),      /* MEM_INST_RETIRED.* */
 	INTEL_EVENT_CONSTRAINT(0x0f, 0xf),    /* MEM_UNCORE_RETIRED.* */
@@ -558,6 +584,7 @@ struct event_constraint intel_snb_pebs_event_constraints[] = {
 	INTEL_EVENT_CONSTRAINT(0xd0, 0xf),    /* MEM_UOP_RETIRED.* */
 	INTEL_EVENT_CONSTRAINT(0xd1, 0xf),    /* MEM_LOAD_UOPS_RETIRED.* */
 	INTEL_EVENT_CONSTRAINT(0xd2, 0xf),    /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.* */
+	INTEL_EVENT_CONSTRAINT(0xd3, 0xf),    /* MEM_LOAD_UOPS_LLC_MISS_RETIRED.* */
 	INTEL_UEVENT_CONSTRAINT(0x02d4, 0xf), /* MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS */
 	EVENT_CONSTRAINT_END
 };
diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/kernel/cpu/perf_event_intel_uncore.c
index 1fb6c72..4118f9f 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_uncore.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.c
@@ -6,6 +6,8 @@ static struct intel_uncore_type **pci_uncores = empty_uncore;
 /* pci bus to socket mapping */
 static int pcibus_to_physid[256] = { [0 ... 255] = -1, };
 
+static struct pci_dev *extra_pci_dev[UNCORE_SOCKET_MAX][UNCORE_EXTRA_PCI_DEV_MAX];
+
 static DEFINE_RAW_SPINLOCK(uncore_box_lock);
 
 /* mask of cpus that collect uncore events */
@@ -45,6 +47,24 @@ DEFINE_UNCORE_FORMAT_ATTR(filter_band0, filter_band0, "config1:0-7");
 DEFINE_UNCORE_FORMAT_ATTR(filter_band1, filter_band1, "config1:8-15");
 DEFINE_UNCORE_FORMAT_ATTR(filter_band2, filter_band2, "config1:16-23");
 DEFINE_UNCORE_FORMAT_ATTR(filter_band3, filter_band3, "config1:24-31");
+DEFINE_UNCORE_FORMAT_ATTR(match_rds, match_rds, "config1:48-51");
+DEFINE_UNCORE_FORMAT_ATTR(match_rnid30, match_rnid30, "config1:32-35");
+DEFINE_UNCORE_FORMAT_ATTR(match_rnid4, match_rnid4, "config1:31");
+DEFINE_UNCORE_FORMAT_ATTR(match_dnid, match_dnid, "config1:13-17");
+DEFINE_UNCORE_FORMAT_ATTR(match_mc, match_mc, "config1:9-12");
+DEFINE_UNCORE_FORMAT_ATTR(match_opc, match_opc, "config1:5-8");
+DEFINE_UNCORE_FORMAT_ATTR(match_vnw, match_vnw, "config1:3-4");
+DEFINE_UNCORE_FORMAT_ATTR(match0, match0, "config1:0-31");
+DEFINE_UNCORE_FORMAT_ATTR(match1, match1, "config1:32-63");
+DEFINE_UNCORE_FORMAT_ATTR(mask_rds, mask_rds, "config2:48-51");
+DEFINE_UNCORE_FORMAT_ATTR(mask_rnid30, mask_rnid30, "config2:32-35");
+DEFINE_UNCORE_FORMAT_ATTR(mask_rnid4, mask_rnid4, "config2:31");
+DEFINE_UNCORE_FORMAT_ATTR(mask_dnid, mask_dnid, "config2:13-17");
+DEFINE_UNCORE_FORMAT_ATTR(mask_mc, mask_mc, "config2:9-12");
+DEFINE_UNCORE_FORMAT_ATTR(mask_opc, mask_opc, "config2:5-8");
+DEFINE_UNCORE_FORMAT_ATTR(mask_vnw, mask_vnw, "config2:3-4");
+DEFINE_UNCORE_FORMAT_ATTR(mask0, mask0, "config2:0-31");
+DEFINE_UNCORE_FORMAT_ATTR(mask1, mask1, "config2:32-63");
 
 static u64 uncore_msr_read_counter(struct intel_uncore_box *box, struct perf_event *event)
 {
@@ -281,7 +301,7 @@ static struct attribute *snbep_uncore_cbox_formats_attr[] = {
 };
 
 static struct attribute *snbep_uncore_pcu_formats_attr[] = {
-	&format_attr_event.attr,
+	&format_attr_event_ext.attr,
 	&format_attr_occ_sel.attr,
 	&format_attr_edge.attr,
 	&format_attr_inv.attr,
@@ -301,6 +321,24 @@ static struct attribute *snbep_uncore_qpi_formats_attr[] = {
 	&format_attr_edge.attr,
 	&format_attr_inv.attr,
 	&format_attr_thresh8.attr,
+	&format_attr_match_rds.attr,
+	&format_attr_match_rnid30.attr,
+	&format_attr_match_rnid4.attr,
+	&format_attr_match_dnid.attr,
+	&format_attr_match_mc.attr,
+	&format_attr_match_opc.attr,
+	&format_attr_match_vnw.attr,
+	&format_attr_match0.attr,
+	&format_attr_match1.attr,
+	&format_attr_mask_rds.attr,
+	&format_attr_mask_rnid30.attr,
+	&format_attr_mask_rnid4.attr,
+	&format_attr_mask_dnid.attr,
+	&format_attr_mask_mc.attr,
+	&format_attr_mask_opc.attr,
+	&format_attr_mask_vnw.attr,
+	&format_attr_mask0.attr,
+	&format_attr_mask1.attr,
 	NULL,
 };
 
@@ -356,13 +394,16 @@ static struct intel_uncore_ops snbep_uncore_msr_ops = {
 	SNBEP_UNCORE_MSR_OPS_COMMON_INIT(),
 };
 
+#define SNBEP_UNCORE_PCI_OPS_COMMON_INIT()			\
+	.init_box	= snbep_uncore_pci_init_box,		\
+	.disable_box	= snbep_uncore_pci_disable_box,		\
+	.enable_box	= snbep_uncore_pci_enable_box,		\
+	.disable_event	= snbep_uncore_pci_disable_event,	\
+	.read_counter	= snbep_uncore_pci_read_counter
+
 static struct intel_uncore_ops snbep_uncore_pci_ops = {
-	.init_box	= snbep_uncore_pci_init_box,
-	.disable_box	= snbep_uncore_pci_disable_box,
-	.enable_box	= snbep_uncore_pci_enable_box,
-	.disable_event	= snbep_uncore_pci_disable_event,
-	.enable_event	= snbep_uncore_pci_enable_event,
-	.read_counter	= snbep_uncore_pci_read_counter,
+	SNBEP_UNCORE_PCI_OPS_COMMON_INIT(),
+	.enable_event	= snbep_uncore_pci_enable_event,	\
 };
 
 static struct event_constraint snbep_uncore_cbox_constraints[] = {
@@ -726,6 +767,61 @@ static struct intel_uncore_type *snbep_msr_uncores[] = {
 	NULL,
 };
 
+enum {
+	SNBEP_PCI_QPI_PORT0_FILTER,
+	SNBEP_PCI_QPI_PORT1_FILTER,
+};
+
+static int snbep_qpi_hw_config(struct intel_uncore_box *box, struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	struct hw_perf_event_extra *reg1 = &hwc->extra_reg;
+	struct hw_perf_event_extra *reg2 = &hwc->branch_reg;
+
+	if ((hwc->config & SNBEP_PMON_CTL_EV_SEL_MASK) == 0x38) {
+		reg1->idx = 0;
+		reg1->reg = SNBEP_Q_Py_PCI_PMON_PKT_MATCH0;
+		reg1->config = event->attr.config1;
+		reg2->reg = SNBEP_Q_Py_PCI_PMON_PKT_MASK0;
+		reg2->config = event->attr.config2;
+	}
+	return 0;
+}
+
+static void snbep_qpi_enable_event(struct intel_uncore_box *box, struct perf_event *event)
+{
+	struct pci_dev *pdev = box->pci_dev;
+	struct hw_perf_event *hwc = &event->hw;
+	struct hw_perf_event_extra *reg1 = &hwc->extra_reg;
+	struct hw_perf_event_extra *reg2 = &hwc->branch_reg;
+
+	if (reg1->idx != EXTRA_REG_NONE) {
+		int idx = box->pmu->pmu_idx + SNBEP_PCI_QPI_PORT0_FILTER;
+		struct pci_dev *filter_pdev = extra_pci_dev[box->phys_id][idx];
+		WARN_ON_ONCE(!filter_pdev);
+		if (filter_pdev) {
+			pci_write_config_dword(filter_pdev, reg1->reg,
+						(u32)reg1->config);
+			pci_write_config_dword(filter_pdev, reg1->reg + 4,
+						(u32)(reg1->config >> 32));
+			pci_write_config_dword(filter_pdev, reg2->reg,
+						(u32)reg2->config);
+			pci_write_config_dword(filter_pdev, reg2->reg + 4,
+						(u32)(reg2->config >> 32));
+		}
+	}
+
+	pci_write_config_dword(pdev, hwc->config_base, hwc->config | SNBEP_PMON_CTL_EN);
+}
+
+static struct intel_uncore_ops snbep_uncore_qpi_ops = {
+	SNBEP_UNCORE_PCI_OPS_COMMON_INIT(),
+	.enable_event		= snbep_qpi_enable_event,
+	.hw_config		= snbep_qpi_hw_config,
+	.get_constraint		= uncore_get_constraint,
+	.put_constraint		= uncore_put_constraint,
+};
+
 #define SNBEP_UNCORE_PCI_COMMON_INIT()				\
 	.perf_ctr	= SNBEP_PCI_PMON_CTR0,			\
 	.event_ctl	= SNBEP_PCI_PMON_CTL0,			\
@@ -755,17 +851,18 @@ static struct intel_uncore_type snbep_uncore_imc = {
 };
 
 static struct intel_uncore_type snbep_uncore_qpi = {
-	.name		= "qpi",
-	.num_counters   = 4,
-	.num_boxes	= 2,
-	.perf_ctr_bits	= 48,
-	.perf_ctr	= SNBEP_PCI_PMON_CTR0,
-	.event_ctl	= SNBEP_PCI_PMON_CTL0,
-	.event_mask	= SNBEP_QPI_PCI_PMON_RAW_EVENT_MASK,
-	.box_ctl	= SNBEP_PCI_PMON_BOX_CTL,
-	.ops		= &snbep_uncore_pci_ops,
-	.event_descs	= snbep_uncore_qpi_events,
-	.format_group	= &snbep_uncore_qpi_format_group,
+	.name			= "qpi",
+	.num_counters		= 4,
+	.num_boxes		= 2,
+	.perf_ctr_bits		= 48,
+	.perf_ctr		= SNBEP_PCI_PMON_CTR0,
+	.event_ctl		= SNBEP_PCI_PMON_CTL0,
+	.event_mask		= SNBEP_QPI_PCI_PMON_RAW_EVENT_MASK,
+	.box_ctl		= SNBEP_PCI_PMON_BOX_CTL,
+	.num_shared_regs	= 1,
+	.ops			= &snbep_uncore_qpi_ops,
+	.event_descs		= snbep_uncore_qpi_events,
+	.format_group		= &snbep_uncore_qpi_format_group,
 };
 
 
@@ -807,43 +904,53 @@ static struct intel_uncore_type *snbep_pci_uncores[] = {
 static DEFINE_PCI_DEVICE_TABLE(snbep_uncore_pci_ids) = {
 	{ /* Home Agent */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_UNC_HA),
-		.driver_data = SNBEP_PCI_UNCORE_HA,
+		.driver_data = UNCORE_PCI_DEV_DATA(SNBEP_PCI_UNCORE_HA, 0),
 	},
 	{ /* MC Channel 0 */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_UNC_IMC0),
-		.driver_data = SNBEP_PCI_UNCORE_IMC,
+		.driver_data = UNCORE_PCI_DEV_DATA(SNBEP_PCI_UNCORE_IMC, 0),
 	},
 	{ /* MC Channel 1 */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_UNC_IMC1),
-		.driver_data = SNBEP_PCI_UNCORE_IMC,
+		.driver_data = UNCORE_PCI_DEV_DATA(SNBEP_PCI_UNCORE_IMC, 1),
 	},
 	{ /* MC Channel 2 */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_UNC_IMC2),
-		.driver_data = SNBEP_PCI_UNCORE_IMC,
+		.driver_data = UNCORE_PCI_DEV_DATA(SNBEP_PCI_UNCORE_IMC, 2),
 	},
 	{ /* MC Channel 3 */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_UNC_IMC3),
-		.driver_data = SNBEP_PCI_UNCORE_IMC,
+		.driver_data = UNCORE_PCI_DEV_DATA(SNBEP_PCI_UNCORE_IMC, 3),
 	},
 	{ /* QPI Port 0 */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_UNC_QPI0),
-		.driver_data = SNBEP_PCI_UNCORE_QPI,
+		.driver_data = UNCORE_PCI_DEV_DATA(SNBEP_PCI_UNCORE_QPI, 0),
 	},
 	{ /* QPI Port 1 */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_UNC_QPI1),
-		.driver_data = SNBEP_PCI_UNCORE_QPI,
+		.driver_data = UNCORE_PCI_DEV_DATA(SNBEP_PCI_UNCORE_QPI, 1),
 	},
 	{ /* R2PCIe */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_UNC_R2PCIE),
-		.driver_data = SNBEP_PCI_UNCORE_R2PCIE,
+		.driver_data = UNCORE_PCI_DEV_DATA(SNBEP_PCI_UNCORE_R2PCIE, 0),
 	},
 	{ /* R3QPI Link 0 */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_UNC_R3QPI0),
-		.driver_data = SNBEP_PCI_UNCORE_R3QPI,
+		.driver_data = UNCORE_PCI_DEV_DATA(SNBEP_PCI_UNCORE_R3QPI, 0),
 	},
 	{ /* R3QPI Link 1 */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_UNC_R3QPI1),
-		.driver_data = SNBEP_PCI_UNCORE_R3QPI,
+		.driver_data = UNCORE_PCI_DEV_DATA(SNBEP_PCI_UNCORE_R3QPI, 1),
+	},
+	{ /* QPI Port 0 filter  */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x3c86),
+		.driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV,
+						   SNBEP_PCI_QPI_PORT0_FILTER),
+	},
+	{ /* QPI Port 0 filter  */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x3c96),
+		.driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV,
+						   SNBEP_PCI_QPI_PORT1_FILTER),
 	},
 	{ /* end: all zeroes */ }
 };
@@ -1256,71 +1363,71 @@ static struct intel_uncore_type *ivt_pci_uncores[] = {
 static DEFINE_PCI_DEVICE_TABLE(ivt_uncore_pci_ids) = {
 	{ /* Home Agent 0 */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe30),
-		.driver_data = IVT_PCI_UNCORE_HA,
+		.driver_data = UNCORE_PCI_DEV_DATA(IVT_PCI_UNCORE_HA, 0),
 	},
 	{ /* Home Agent 1 */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe38),
-		.driver_data = IVT_PCI_UNCORE_HA,
+		.driver_data = UNCORE_PCI_DEV_DATA(IVT_PCI_UNCORE_HA, 1),
 	},
 	{ /* MC0 Channel 0 */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xeb4),
-		.driver_data = IVT_PCI_UNCORE_IMC,
+		.driver_data = UNCORE_PCI_DEV_DATA(IVT_PCI_UNCORE_IMC, 0),
 	},
 	{ /* MC0 Channel 1 */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xeb5),
-		.driver_data = IVT_PCI_UNCORE_IMC,
+		.driver_data = UNCORE_PCI_DEV_DATA(IVT_PCI_UNCORE_IMC, 1),
 	},
 	{ /* MC0 Channel 3 */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xeb0),
-		.driver_data = IVT_PCI_UNCORE_IMC,
+		.driver_data = UNCORE_PCI_DEV_DATA(IVT_PCI_UNCORE_IMC, 2),
 	},
 	{ /* MC0 Channel 4 */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xeb1),
-		.driver_data = IVT_PCI_UNCORE_IMC,
+		.driver_data = UNCORE_PCI_DEV_DATA(IVT_PCI_UNCORE_IMC, 3),
 	},
 	{ /* MC1 Channel 0 */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xef4),
-		.driver_data = IVT_PCI_UNCORE_IMC,
+		.driver_data = UNCORE_PCI_DEV_DATA(IVT_PCI_UNCORE_IMC, 4),
 	},
 	{ /* MC1 Channel 1 */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xef5),
-		.driver_data = IVT_PCI_UNCORE_IMC,
+		.driver_data = UNCORE_PCI_DEV_DATA(IVT_PCI_UNCORE_IMC, 5),
 	},
 	{ /* MC1 Channel 3 */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xef0),
-		.driver_data = IVT_PCI_UNCORE_IMC,
+		.driver_data = UNCORE_PCI_DEV_DATA(IVT_PCI_UNCORE_IMC, 6),
 	},
 	{ /* MC1 Channel 4 */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xef1),
-		.driver_data = IVT_PCI_UNCORE_IMC,
+		.driver_data = UNCORE_PCI_DEV_DATA(IVT_PCI_UNCORE_IMC, 7),
 	},
 	{ /* QPI0 Port 0 */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe32),
-		.driver_data = IVT_PCI_UNCORE_QPI,
+		.driver_data = UNCORE_PCI_DEV_DATA(IVT_PCI_UNCORE_QPI, 0),
 	},
 	{ /* QPI0 Port 1 */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe33),
-		.driver_data = IVT_PCI_UNCORE_QPI,
+		.driver_data = UNCORE_PCI_DEV_DATA(IVT_PCI_UNCORE_QPI, 1),
 	},
 	{ /* QPI1 Port 2 */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe3a),
-		.driver_data = IVT_PCI_UNCORE_QPI,
+		.driver_data = UNCORE_PCI_DEV_DATA(IVT_PCI_UNCORE_QPI, 2),
 	},
 	{ /* R2PCIe */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe34),
-		.driver_data = IVT_PCI_UNCORE_R2PCIE,
+		.driver_data = UNCORE_PCI_DEV_DATA(IVT_PCI_UNCORE_R2PCIE, 0),
 	},
 	{ /* R3QPI0 Link 0 */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe36),
-		.driver_data = IVT_PCI_UNCORE_R3QPI,
+		.driver_data = UNCORE_PCI_DEV_DATA(IVT_PCI_UNCORE_R3QPI, 0),
 	},
 	{ /* R3QPI0 Link 1 */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe37),
-		.driver_data = IVT_PCI_UNCORE_R3QPI,
+		.driver_data = UNCORE_PCI_DEV_DATA(IVT_PCI_UNCORE_R3QPI, 1),
 	},
 	{ /* R3QPI1 Link 2 */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe3e),
-		.driver_data = IVT_PCI_UNCORE_R3QPI,
+		.driver_data = UNCORE_PCI_DEV_DATA(IVT_PCI_UNCORE_R3QPI, 2),
 	},
 	{ /* end: all zeroes */ }
 };
@@ -2599,14 +2706,14 @@ static void uncore_pmu_init_hrtimer(struct intel_uncore_box *box)
 	box->hrtimer.function = uncore_pmu_hrtimer;
 }
 
-struct intel_uncore_box *uncore_alloc_box(struct intel_uncore_type *type, int cpu)
+static struct intel_uncore_box *uncore_alloc_box(struct intel_uncore_type *type, int node)
 {
 	struct intel_uncore_box *box;
 	int i, size;
 
 	size = sizeof(*box) + type->num_shared_regs * sizeof(struct intel_uncore_extra_reg);
 
-	box = kmalloc_node(size, GFP_KERNEL | __GFP_ZERO, cpu_to_node(cpu));
+	box = kzalloc_node(size, GFP_KERNEL, node);
 	if (!box)
 		return NULL;
 
@@ -2701,7 +2808,7 @@ uncore_get_event_constraint(struct intel_uncore_box *box, struct perf_event *eve
 			return c;
 	}
 
-	if (event->hw.config == ~0ULL)
+	if (event->attr.config == UNCORE_FIXED_EVENT)
 		return &constraint_fixed;
 
 	if (type->constraints) {
@@ -2924,7 +3031,7 @@ static int uncore_validate_group(struct intel_uncore_pmu *pmu,
 	struct intel_uncore_box *fake_box;
 	int ret = -EINVAL, n;
 
-	fake_box = uncore_alloc_box(pmu->type, smp_processor_id());
+	fake_box = uncore_alloc_box(pmu->type, NUMA_NO_NODE);
 	if (!fake_box)
 		return -ENOMEM;
 
@@ -3005,7 +3112,9 @@ static int uncore_pmu_event_init(struct perf_event *event)
 		 */
 		if (pmu->type->single_fixed && pmu->pmu_idx > 0)
 			return -EINVAL;
-		hwc->config = ~0ULL;
+
+		/* fixed counters have event field hardcoded to zero */
+		hwc->config = 0ULL;
 	} else {
 		hwc->config = event->attr.config & pmu->type->event_mask;
 		if (pmu->type->ops->hw_config) {
@@ -3167,17 +3276,25 @@ static bool pcidrv_registered;
 /*
  * add a pci uncore device
  */
-static int uncore_pci_add(struct intel_uncore_type *type, struct pci_dev *pdev)
+static int uncore_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	struct intel_uncore_pmu *pmu;
 	struct intel_uncore_box *box;
-	int i, phys_id;
+	struct intel_uncore_type *type;
+	int phys_id;
 
 	phys_id = pcibus_to_physid[pdev->bus->number];
 	if (phys_id < 0)
 		return -ENODEV;
 
-	box = uncore_alloc_box(type, 0);
+	if (UNCORE_PCI_DEV_TYPE(id->driver_data) == UNCORE_EXTRA_PCI_DEV) {
+		extra_pci_dev[phys_id][UNCORE_PCI_DEV_IDX(id->driver_data)] = pdev;
+		pci_set_drvdata(pdev, NULL);
+		return 0;
+	}
+
+	type = pci_uncores[UNCORE_PCI_DEV_TYPE(id->driver_data)];
+	box = uncore_alloc_box(type, NUMA_NO_NODE);
 	if (!box)
 		return -ENOMEM;
 
@@ -3185,21 +3302,11 @@ static int uncore_pci_add(struct intel_uncore_type *type, struct pci_dev *pdev)
 	 * for performance monitoring unit with multiple boxes,
 	 * each box has a different function id.
 	 */
-	for (i = 0; i < type->num_boxes; i++) {
-		pmu = &type->pmus[i];
-		if (pmu->func_id == pdev->devfn)
-			break;
-		if (pmu->func_id < 0) {
-			pmu->func_id = pdev->devfn;
-			break;
-		}
-		pmu = NULL;
-	}
-
-	if (!pmu) {
-		kfree(box);
-		return -EINVAL;
-	}
+	pmu = &type->pmus[UNCORE_PCI_DEV_IDX(id->driver_data)];
+	if (pmu->func_id < 0)
+		pmu->func_id = pdev->devfn;
+	else
+		WARN_ON_ONCE(pmu->func_id != pdev->devfn);
 
 	box->phys_id = phys_id;
 	box->pci_dev = pdev;
@@ -3217,9 +3324,22 @@ static int uncore_pci_add(struct intel_uncore_type *type, struct pci_dev *pdev)
 static void uncore_pci_remove(struct pci_dev *pdev)
 {
 	struct intel_uncore_box *box = pci_get_drvdata(pdev);
-	struct intel_uncore_pmu *pmu = box->pmu;
-	int cpu, phys_id = pcibus_to_physid[pdev->bus->number];
+	struct intel_uncore_pmu *pmu;
+	int i, cpu, phys_id = pcibus_to_physid[pdev->bus->number];
+
+	box = pci_get_drvdata(pdev);
+	if (!box) {
+		for (i = 0; i < UNCORE_EXTRA_PCI_DEV_MAX; i++) {
+			if (extra_pci_dev[phys_id][i] == pdev) {
+				extra_pci_dev[phys_id][i] = NULL;
+				break;
+			}
+		}
+		WARN_ON_ONCE(i >= UNCORE_EXTRA_PCI_DEV_MAX);
+		return;
+	}
 
+	pmu = box->pmu;
 	if (WARN_ON_ONCE(phys_id != box->phys_id))
 		return;
 
@@ -3240,12 +3360,6 @@ static void uncore_pci_remove(struct pci_dev *pdev)
 	kfree(box);
 }
 
-static int uncore_pci_probe(struct pci_dev *pdev,
-			    const struct pci_device_id *id)
-{
-	return uncore_pci_add(pci_uncores[id->driver_data], pdev);
-}
-
 static int __init uncore_pci_init(void)
 {
 	int ret;
@@ -3385,7 +3499,7 @@ static int uncore_cpu_prepare(int cpu, int phys_id)
 			if (pmu->func_id < 0)
 				pmu->func_id = j;
 
-			box = uncore_alloc_box(type, cpu);
+			box = uncore_alloc_box(type, cpu_to_node(cpu));
 			if (!box)
 				return -ENOMEM;
 
diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.h b/arch/x86/kernel/cpu/perf_event_intel_uncore.h
index 47b3d00..a80ab71 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_uncore.h
+++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.h
@@ -12,6 +12,15 @@
 #define UNCORE_PMC_IDX_FIXED		UNCORE_PMC_IDX_MAX_GENERIC
 #define UNCORE_PMC_IDX_MAX		(UNCORE_PMC_IDX_FIXED + 1)
 
+#define UNCORE_PCI_DEV_DATA(type, idx)	((type << 8) | idx)
+#define UNCORE_PCI_DEV_TYPE(data)	((data >> 8) & 0xff)
+#define UNCORE_PCI_DEV_IDX(data)	(data & 0xff)
+#define UNCORE_EXTRA_PCI_DEV		0xff
+#define UNCORE_EXTRA_PCI_DEV_MAX	2
+
+/* support up to 8 sockets */
+#define UNCORE_SOCKET_MAX		8
+
 #define UNCORE_EVENT_CONSTRAINT(c, n) EVENT_CONSTRAINT(c, n, 0xff)
 
 /* SNB event control */
@@ -108,6 +117,7 @@
 				(SNBEP_PMON_CTL_EV_SEL_MASK | \
 				 SNBEP_PCU_MSR_PMON_CTL_OCC_SEL_MASK | \
 				 SNBEP_PMON_CTL_EDGE_DET | \
+				 SNBEP_PMON_CTL_EV_SEL_EXT | \
 				 SNBEP_PMON_CTL_INVERT | \
 				 SNBEP_PCU_MSR_PMON_CTL_TRESH_MASK | \
 				 SNBEP_PCU_MSR_PMON_CTL_OCC_INVERT | \
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 7076878..628a059 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -93,7 +93,7 @@ static void __init vmware_platform_setup(void)
  * serial key should be enough, as this will always have a VMware
  * specific string when running under VMware hypervisor.
  */
-static bool __init vmware_platform(void)
+static uint32_t __init vmware_platform(void)
 {
 	if (cpu_has_hypervisor) {
 		unsigned int eax;
@@ -102,12 +102,12 @@ static bool __init vmware_platform(void)
 		cpuid(CPUID_VMWARE_INFO_LEAF, &eax, &hyper_vendor_id[0],
 		      &hyper_vendor_id[1], &hyper_vendor_id[2]);
 		if (!memcmp(hyper_vendor_id, "VMwareVMware", 12))
-			return true;
+			return CPUID_VMWARE_INFO_LEAF;
 	} else if (dmi_available && dmi_name_in_serial("VMware") &&
 		   __vmware_platform())
-		return true;
+		return 1;
 
-	return false;
+	return 0;
 }
 
 /*
diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index 74467fe..e0e0841 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -128,7 +128,9 @@ void native_machine_crash_shutdown(struct pt_regs *regs)
 	cpu_emergency_svm_disable();
 
 	lapic_shutdown();
-#if defined(CONFIG_X86_IO_APIC)
+#ifdef CONFIG_X86_IO_APIC
+	/* Prevent crash_kexec() from deadlocking on ioapic_lock. */
+	ioapic_zap_locks();
 	disable_IO_APIC();
 #endif
 #ifdef CONFIG_HPET_TIMER
diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c
index 69eb2fa..376dc78 100644
--- a/arch/x86/kernel/devicetree.c
+++ b/arch/x86/kernel/devicetree.c
@@ -52,8 +52,7 @@ void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
 }
 
 #ifdef CONFIG_BLK_DEV_INITRD
-void __init early_init_dt_setup_initrd_arch(unsigned long start,
-					    unsigned long end)
+void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
 {
 	initrd_start = (unsigned long)__va(start);
 	initrd_end = (unsigned long)__va(end);
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index d32abea..174da5f 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -658,15 +658,18 @@ __init void e820_setup_gap(void)
  * boot_params.e820_map, others are passed via SETUP_E820_EXT node of
  * linked list of struct setup_data, which is parsed here.
  */
-void __init parse_e820_ext(struct setup_data *sdata)
+void __init parse_e820_ext(u64 phys_addr, u32 data_len)
 {
 	int entries;
 	struct e820entry *extmap;
+	struct setup_data *sdata;
 
+	sdata = early_memremap(phys_addr, data_len);
 	entries = sdata->len / sizeof(struct e820entry);
 	extmap = (struct e820entry *)(sdata->data);
 	__append_e820_map(extmap, entries);
 	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+	early_iounmap(sdata, data_len);
 	printk(KERN_INFO "e820: extended physical RAM map:\n");
 	e820_print_map("extended");
 }
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index 63bdb29..b3cd3eb 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -12,6 +12,7 @@
 #include <linux/pci.h>
 #include <linux/acpi.h>
 #include <linux/pci_ids.h>
+#include <drm/i915_drm.h>
 #include <asm/pci-direct.h>
 #include <asm/dma.h>
 #include <asm/io_apic.h>
@@ -216,6 +217,157 @@ static void __init intel_remapping_check(int num, int slot, int func)
 
 }
 
+/*
+ * Systems with Intel graphics controllers set aside memory exclusively
+ * for gfx driver use.  This memory is not marked in the E820 as reserved
+ * or as RAM, and so is subject to overlap from E820 manipulation later
+ * in the boot process.  On some systems, MMIO space is allocated on top,
+ * despite the efforts of the "RAM buffer" approach, which simply rounds
+ * memory boundaries up to 64M to try to catch space that may decode
+ * as RAM and so is not suitable for MMIO.
+ *
+ * And yes, so far on current devices the base addr is always under 4G.
+ */
+static u32 __init intel_stolen_base(int num, int slot, int func)
+{
+	u32 base;
+
+	/*
+	 * For the PCI IDs in this quirk, the stolen base is always
+	 * in 0x5c, aka the BDSM register (yes that's really what
+	 * it's called).
+	 */
+	base = read_pci_config(num, slot, func, 0x5c);
+	base &= ~((1<<20) - 1);
+
+	return base;
+}
+
+#define KB(x)	((x) * 1024)
+#define MB(x)	(KB (KB (x)))
+#define GB(x)	(MB (KB (x)))
+
+static size_t __init gen3_stolen_size(int num, int slot, int func)
+{
+	size_t stolen_size;
+	u16 gmch_ctrl;
+
+	gmch_ctrl = read_pci_config_16(0, 0, 0, I830_GMCH_CTRL);
+
+	switch (gmch_ctrl & I855_GMCH_GMS_MASK) {
+	case I855_GMCH_GMS_STOLEN_1M:
+		stolen_size = MB(1);
+		break;
+	case I855_GMCH_GMS_STOLEN_4M:
+		stolen_size = MB(4);
+		break;
+	case I855_GMCH_GMS_STOLEN_8M:
+		stolen_size = MB(8);
+		break;
+	case I855_GMCH_GMS_STOLEN_16M:
+		stolen_size = MB(16);
+		break;
+	case I855_GMCH_GMS_STOLEN_32M:
+		stolen_size = MB(32);
+		break;
+	case I915_GMCH_GMS_STOLEN_48M:
+		stolen_size = MB(48);
+		break;
+	case I915_GMCH_GMS_STOLEN_64M:
+		stolen_size = MB(64);
+		break;
+	case G33_GMCH_GMS_STOLEN_128M:
+		stolen_size = MB(128);
+		break;
+	case G33_GMCH_GMS_STOLEN_256M:
+		stolen_size = MB(256);
+		break;
+	case INTEL_GMCH_GMS_STOLEN_96M:
+		stolen_size = MB(96);
+		break;
+	case INTEL_GMCH_GMS_STOLEN_160M:
+		stolen_size = MB(160);
+		break;
+	case INTEL_GMCH_GMS_STOLEN_224M:
+		stolen_size = MB(224);
+		break;
+	case INTEL_GMCH_GMS_STOLEN_352M:
+		stolen_size = MB(352);
+		break;
+	default:
+		stolen_size = 0;
+		break;
+	}
+
+	return stolen_size;
+}
+
+static size_t __init gen6_stolen_size(int num, int slot, int func)
+{
+	u16 gmch_ctrl;
+
+	gmch_ctrl = read_pci_config_16(num, slot, func, SNB_GMCH_CTRL);
+	gmch_ctrl >>= SNB_GMCH_GMS_SHIFT;
+	gmch_ctrl &= SNB_GMCH_GMS_MASK;
+
+	return gmch_ctrl << 25; /* 32 MB units */
+}
+
+typedef size_t (*stolen_size_fn)(int num, int slot, int func);
+
+static struct pci_device_id intel_stolen_ids[] __initdata = {
+	INTEL_I915G_IDS(gen3_stolen_size),
+	INTEL_I915GM_IDS(gen3_stolen_size),
+	INTEL_I945G_IDS(gen3_stolen_size),
+	INTEL_I945GM_IDS(gen3_stolen_size),
+	INTEL_VLV_M_IDS(gen3_stolen_size),
+	INTEL_VLV_D_IDS(gen3_stolen_size),
+	INTEL_PINEVIEW_IDS(gen3_stolen_size),
+	INTEL_I965G_IDS(gen3_stolen_size),
+	INTEL_G33_IDS(gen3_stolen_size),
+	INTEL_I965GM_IDS(gen3_stolen_size),
+	INTEL_GM45_IDS(gen3_stolen_size),
+	INTEL_G45_IDS(gen3_stolen_size),
+	INTEL_IRONLAKE_D_IDS(gen3_stolen_size),
+	INTEL_IRONLAKE_M_IDS(gen3_stolen_size),
+	INTEL_SNB_D_IDS(gen6_stolen_size),
+	INTEL_SNB_M_IDS(gen6_stolen_size),
+	INTEL_IVB_M_IDS(gen6_stolen_size),
+	INTEL_IVB_D_IDS(gen6_stolen_size),
+	INTEL_HSW_D_IDS(gen6_stolen_size),
+	INTEL_HSW_M_IDS(gen6_stolen_size),
+};
+
+static void __init intel_graphics_stolen(int num, int slot, int func)
+{
+	size_t size;
+	int i;
+	u32 start;
+	u16 device, subvendor, subdevice;
+
+	device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID);
+	subvendor = read_pci_config_16(num, slot, func,
+				       PCI_SUBSYSTEM_VENDOR_ID);
+	subdevice = read_pci_config_16(num, slot, func, PCI_SUBSYSTEM_ID);
+
+	for (i = 0; i < ARRAY_SIZE(intel_stolen_ids); i++) {
+		if (intel_stolen_ids[i].device == device) {
+			stolen_size_fn stolen_size =
+				(stolen_size_fn)intel_stolen_ids[i].driver_data;
+			size = stolen_size(num, slot, func);
+			start = intel_stolen_base(num, slot, func);
+			if (size && start) {
+				/* Mark this space as reserved */
+				e820_add_region(start, size, E820_RESERVED);
+				sanitize_e820_map(e820.map,
+						  ARRAY_SIZE(e820.map),
+						  &e820.nr_map);
+			}
+			return;
+		}
+	}
+}
+
 #define QFLAG_APPLY_ONCE 	0x1
 #define QFLAG_APPLIED		0x2
 #define QFLAG_DONE		(QFLAG_APPLY_ONCE|QFLAG_APPLIED)
@@ -251,6 +403,8 @@ static struct chipset early_qrk[] __initdata = {
 	  PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check },
 	{ PCI_VENDOR_ID_INTEL, 0x3406, PCI_CLASS_BRIDGE_HOST,
 	  PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check },
+	{ PCI_VENDOR_ID_INTEL, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA, PCI_ANY_ID,
+	  QFLAG_APPLY_ONCE, intel_graphics_stolen },
 	{}
 };
 
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 2cfbc3a..f0dcb0c 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -1176,6 +1176,9 @@ ftrace_restore_flags:
 #else /* ! CONFIG_DYNAMIC_FTRACE */
 
 ENTRY(mcount)
+	cmpl $__PAGE_OFFSET, %esp
+	jb ftrace_stub		/* Paging not enabled yet? */
+
 	cmpl $0, function_trace_stop
 	jne  ftrace_stub
 
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 1b69951..b077f4c 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -487,21 +487,6 @@ ENDPROC(native_usergs_sysret64)
 	TRACE_IRQS_OFF
 	.endm
 
-ENTRY(save_rest)
-	PARTIAL_FRAME 1 (REST_SKIP+8)
-	movq 5*8+16(%rsp), %r11	/* save return address */
-	movq_cfi rbx, RBX+16
-	movq_cfi rbp, RBP+16
-	movq_cfi r12, R12+16
-	movq_cfi r13, R13+16
-	movq_cfi r14, R14+16
-	movq_cfi r15, R15+16
-	movq %r11, 8(%rsp)	/* return address */
-	FIXUP_TOP_OF_STACK %r11, 16
-	ret
-	CFI_ENDPROC
-END(save_rest)
-
 /* save complete stack frame */
 	.pushsection .kprobes.text, "ax"
 ENTRY(save_paranoid)
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index 138463a..06f87be 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -29,7 +29,7 @@ static void __init i386_default_early_setup(void)
 	reserve_ebda_region();
 }
 
-void __init i386_start_kernel(void)
+asmlinkage void __init i386_start_kernel(void)
 {
 	sanitize_boot_params(&boot_params);
 
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 55b6761..1be8e43 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -137,7 +137,7 @@ static void __init copy_bootdata(char *real_mode_data)
 	}
 }
 
-void __init x86_64_start_kernel(char * real_mode_data)
+asmlinkage void __init x86_64_start_kernel(char * real_mode_data)
 {
 	int i;
 
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 5dd87a8..81ba276 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -409,6 +409,7 @@ enable_paging:
 /*
  * Check if it is 486
  */
+	movb $4,X86			# at least 486
 	cmpl $-1,X86_CPUID
 	je is486
 
@@ -436,7 +437,6 @@ enable_paging:
 	movl %edx,X86_CAPABILITY
 
 is486:
-	movb $4,X86
 	movl $0x50022,%ecx	# set AM, WP, NE and MP
 	movl %cr0,%eax
 	andl $0x80000011,%eax	# Save PG,PE,ET
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 3a8185c..22d0687 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -177,7 +177,7 @@ u64 arch_irq_stat(void)
  * SMP cross-CPU interrupts have their own specific
  * handlers).
  */
-unsigned int __irq_entry do_IRQ(struct pt_regs *regs)
+__visible unsigned int __irq_entry do_IRQ(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
 
@@ -215,7 +215,7 @@ void __smp_x86_platform_ipi(void)
 		x86_platform_ipi_callback();
 }
 
-void smp_x86_platform_ipi(struct pt_regs *regs)
+__visible void smp_x86_platform_ipi(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
 
@@ -229,7 +229,7 @@ void smp_x86_platform_ipi(struct pt_regs *regs)
 /*
  * Handler for POSTED_INTERRUPT_VECTOR.
  */
-void smp_kvm_posted_intr_ipi(struct pt_regs *regs)
+__visible void smp_kvm_posted_intr_ipi(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
 
@@ -247,7 +247,7 @@ void smp_kvm_posted_intr_ipi(struct pt_regs *regs)
 }
 #endif
 
-void smp_trace_x86_platform_ipi(struct pt_regs *regs)
+__visible void smp_trace_x86_platform_ipi(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
 
diff --git a/arch/x86/kernel/irq_work.c b/arch/x86/kernel/irq_work.c
index 636a55e..1de84e3a 100644
--- a/arch/x86/kernel/irq_work.c
+++ b/arch/x86/kernel/irq_work.c
@@ -22,14 +22,14 @@ static inline void __smp_irq_work_interrupt(void)
 	irq_work_run();
 }
 
-void smp_irq_work_interrupt(struct pt_regs *regs)
+__visible void smp_irq_work_interrupt(struct pt_regs *regs)
 {
 	irq_work_entering_irq();
 	__smp_irq_work_interrupt();
 	exiting_irq();
 }
 
-void smp_trace_irq_work_interrupt(struct pt_regs *regs)
+__visible void smp_trace_irq_work_interrupt(struct pt_regs *regs)
 {
 	irq_work_entering_irq();
 	trace_irq_work_entry(IRQ_WORK_VECTOR);
diff --git a/arch/x86/kernel/jump_label.c b/arch/x86/kernel/jump_label.c
index 2889b3d..ee11b7d 100644
--- a/arch/x86/kernel/jump_label.c
+++ b/arch/x86/kernel/jump_label.c
@@ -24,20 +24,71 @@ union jump_code_union {
 	} __attribute__((packed));
 };
 
+static void bug_at(unsigned char *ip, int line)
+{
+	/*
+	 * The location is not an op that we were expecting.
+	 * Something went wrong. Crash the box, as something could be
+	 * corrupting the kernel.
+	 */
+	pr_warning("Unexpected op at %pS [%p] (%02x %02x %02x %02x %02x) %s:%d\n",
+	       ip, ip, ip[0], ip[1], ip[2], ip[3], ip[4], __FILE__, line);
+	BUG();
+}
+
 static void __jump_label_transform(struct jump_entry *entry,
 				   enum jump_label_type type,
-				   void *(*poker)(void *, const void *, size_t))
+				   void *(*poker)(void *, const void *, size_t),
+				   int init)
 {
 	union jump_code_union code;
+	const unsigned char *ideal_nop = ideal_nops[NOP_ATOMIC5];
 
 	if (type == JUMP_LABEL_ENABLE) {
+		/*
+		 * We are enabling this jump label. If it is not a nop
+		 * then something must have gone wrong.
+		 */
+		if (unlikely(memcmp((void *)entry->code, ideal_nop, 5) != 0))
+			bug_at((void *)entry->code, __LINE__);
+
 		code.jump = 0xe9;
 		code.offset = entry->target -
 				(entry->code + JUMP_LABEL_NOP_SIZE);
-	} else
+	} else {
+		/*
+		 * We are disabling this jump label. If it is not what
+		 * we think it is, then something must have gone wrong.
+		 * If this is the first initialization call, then we
+		 * are converting the default nop to the ideal nop.
+		 */
+		if (init) {
+			const unsigned char default_nop[] = { STATIC_KEY_INIT_NOP };
+			if (unlikely(memcmp((void *)entry->code, default_nop, 5) != 0))
+				bug_at((void *)entry->code, __LINE__);
+		} else {
+			code.jump = 0xe9;
+			code.offset = entry->target -
+				(entry->code + JUMP_LABEL_NOP_SIZE);
+			if (unlikely(memcmp((void *)entry->code, &code, 5) != 0))
+				bug_at((void *)entry->code, __LINE__);
+		}
 		memcpy(&code, ideal_nops[NOP_ATOMIC5], JUMP_LABEL_NOP_SIZE);
+	}
 
-	(*poker)((void *)entry->code, &code, JUMP_LABEL_NOP_SIZE);
+	/*
+	 * Make text_poke_bp() a default fallback poker.
+	 *
+	 * At the time the change is being done, just ignore whether we
+	 * are doing nop -> jump or jump -> nop transition, and assume
+	 * always nop being the 'currently valid' instruction
+	 *
+	 */
+	if (poker)
+		(*poker)((void *)entry->code, &code, JUMP_LABEL_NOP_SIZE);
+	else
+		text_poke_bp((void *)entry->code, &code, JUMP_LABEL_NOP_SIZE,
+			     (void *)entry->code + JUMP_LABEL_NOP_SIZE);
 }
 
 void arch_jump_label_transform(struct jump_entry *entry,
@@ -45,15 +96,38 @@ void arch_jump_label_transform(struct jump_entry *entry,
 {
 	get_online_cpus();
 	mutex_lock(&text_mutex);
-	__jump_label_transform(entry, type, text_poke_smp);
+	__jump_label_transform(entry, type, NULL, 0);
 	mutex_unlock(&text_mutex);
 	put_online_cpus();
 }
 
+static enum {
+	JL_STATE_START,
+	JL_STATE_NO_UPDATE,
+	JL_STATE_UPDATE,
+} jlstate __initdata_or_module = JL_STATE_START;
+
 __init_or_module void arch_jump_label_transform_static(struct jump_entry *entry,
 				      enum jump_label_type type)
 {
-	__jump_label_transform(entry, type, text_poke_early);
+	/*
+	 * This function is called at boot up and when modules are
+	 * first loaded. Check if the default nop, the one that is
+	 * inserted at compile time, is the ideal nop. If it is, then
+	 * we do not need to update the nop, and we can leave it as is.
+	 * If it is not, then we need to update the nop to the ideal nop.
+	 */
+	if (jlstate == JL_STATE_START) {
+		const unsigned char default_nop[] = { STATIC_KEY_INIT_NOP };
+		const unsigned char *ideal_nop = ideal_nops[NOP_ATOMIC5];
+
+		if (memcmp(ideal_nop, default_nop, 5) != 0)
+			jlstate = JL_STATE_UPDATE;
+		else
+			jlstate = JL_STATE_NO_UPDATE;
+	}
+	if (jlstate == JL_STATE_UPDATE)
+		__jump_label_transform(entry, type, text_poke_early, 1);
 }
 
 #endif
diff --git a/arch/x86/kernel/kprobes/common.h b/arch/x86/kernel/kprobes/common.h
index 2e9d4b5..c6ee63f 100644
--- a/arch/x86/kernel/kprobes/common.h
+++ b/arch/x86/kernel/kprobes/common.h
@@ -82,14 +82,9 @@ extern void synthesize_reljump(void *from, void *to);
 extern void synthesize_relcall(void *from, void *to);
 
 #ifdef	CONFIG_OPTPROBES
-extern int arch_init_optprobes(void);
 extern int setup_detour_execution(struct kprobe *p, struct pt_regs *regs, int reenter);
 extern unsigned long __recover_optprobed_insn(kprobe_opcode_t *buf, unsigned long addr);
 #else	/* !CONFIG_OPTPROBES */
-static inline int arch_init_optprobes(void)
-{
-	return 0;
-}
 static inline int setup_detour_execution(struct kprobe *p, struct pt_regs *regs, int reenter)
 {
 	return 0;
diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index 211bce4..79a3f96 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -661,7 +661,7 @@ static void __used __kprobes kretprobe_trampoline_holder(void)
 /*
  * Called from kretprobe_trampoline
  */
-static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
+__visible __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 {
 	struct kretprobe_instance *ri = NULL;
 	struct hlist_head *head, empty_rp;
@@ -1068,7 +1068,7 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
 
 int __init arch_init_kprobes(void)
 {
-	return arch_init_optprobes();
+	return 0;
 }
 
 int __kprobes arch_trampoline_kprobe(struct kprobe *p)
diff --git a/arch/x86/kernel/kprobes/opt.c b/arch/x86/kernel/kprobes/opt.c
index 76dc6f0..898160b 100644
--- a/arch/x86/kernel/kprobes/opt.c
+++ b/arch/x86/kernel/kprobes/opt.c
@@ -88,9 +88,7 @@ static void __kprobes synthesize_set_arg1(kprobe_opcode_t *addr, unsigned long v
 	*(unsigned long *)addr = val;
 }
 
-static void __used __kprobes kprobes_optinsn_template_holder(void)
-{
-	asm volatile (
+asm (
 			".global optprobe_template_entry\n"
 			"optprobe_template_entry:\n"
 #ifdef CONFIG_X86_64
@@ -129,7 +127,6 @@ static void __used __kprobes kprobes_optinsn_template_holder(void)
 #endif
 			".global optprobe_template_end\n"
 			"optprobe_template_end:\n");
-}
 
 #define TMPL_MOVE_IDX \
 	((long)&optprobe_template_val - (long)&optprobe_template_entry)
@@ -371,31 +368,6 @@ int __kprobes arch_prepare_optimized_kprobe(struct optimized_kprobe *op)
 	return 0;
 }
 
-#define MAX_OPTIMIZE_PROBES 256
-static struct text_poke_param *jump_poke_params;
-static struct jump_poke_buffer {
-	u8 buf[RELATIVEJUMP_SIZE];
-} *jump_poke_bufs;
-
-static void __kprobes setup_optimize_kprobe(struct text_poke_param *tprm,
-					    u8 *insn_buf,
-					    struct optimized_kprobe *op)
-{
-	s32 rel = (s32)((long)op->optinsn.insn -
-			((long)op->kp.addr + RELATIVEJUMP_SIZE));
-
-	/* Backup instructions which will be replaced by jump address */
-	memcpy(op->optinsn.copied_insn, op->kp.addr + INT3_SIZE,
-	       RELATIVE_ADDR_SIZE);
-
-	insn_buf[0] = RELATIVEJUMP_OPCODE;
-	*(s32 *)(&insn_buf[1]) = rel;
-
-	tprm->addr = op->kp.addr;
-	tprm->opcode = insn_buf;
-	tprm->len = RELATIVEJUMP_SIZE;
-}
-
 /*
  * Replace breakpoints (int3) with relative jumps.
  * Caller must call with locking kprobe_mutex and text_mutex.
@@ -403,37 +375,38 @@ static void __kprobes setup_optimize_kprobe(struct text_poke_param *tprm,
 void __kprobes arch_optimize_kprobes(struct list_head *oplist)
 {
 	struct optimized_kprobe *op, *tmp;
-	int c = 0;
+	u8 insn_buf[RELATIVEJUMP_SIZE];
 
 	list_for_each_entry_safe(op, tmp, oplist, list) {
+		s32 rel = (s32)((long)op->optinsn.insn -
+			((long)op->kp.addr + RELATIVEJUMP_SIZE));
+
 		WARN_ON(kprobe_disabled(&op->kp));
-		/* Setup param */
-		setup_optimize_kprobe(&jump_poke_params[c],
-				      jump_poke_bufs[c].buf, op);
+
+		/* Backup instructions which will be replaced by jump address */
+		memcpy(op->optinsn.copied_insn, op->kp.addr + INT3_SIZE,
+		       RELATIVE_ADDR_SIZE);
+
+		insn_buf[0] = RELATIVEJUMP_OPCODE;
+		*(s32 *)(&insn_buf[1]) = rel;
+
+		text_poke_bp(op->kp.addr, insn_buf, RELATIVEJUMP_SIZE,
+			     op->optinsn.insn);
+
 		list_del_init(&op->list);
-		if (++c >= MAX_OPTIMIZE_PROBES)
-			break;
 	}
-
-	/*
-	 * text_poke_smp doesn't support NMI/MCE code modifying.
-	 * However, since kprobes itself also doesn't support NMI/MCE
-	 * code probing, it's not a problem.
-	 */
-	text_poke_smp_batch(jump_poke_params, c);
 }
 
-static void __kprobes setup_unoptimize_kprobe(struct text_poke_param *tprm,
-					      u8 *insn_buf,
-					      struct optimized_kprobe *op)
+/* Replace a relative jump with a breakpoint (int3).  */
+void __kprobes arch_unoptimize_kprobe(struct optimized_kprobe *op)
 {
+	u8 insn_buf[RELATIVEJUMP_SIZE];
+
 	/* Set int3 to first byte for kprobes */
 	insn_buf[0] = BREAKPOINT_INSTRUCTION;
 	memcpy(insn_buf + 1, op->optinsn.copied_insn, RELATIVE_ADDR_SIZE);
-
-	tprm->addr = op->kp.addr;
-	tprm->opcode = insn_buf;
-	tprm->len = RELATIVEJUMP_SIZE;
+	text_poke_bp(op->kp.addr, insn_buf, RELATIVEJUMP_SIZE,
+		     op->optinsn.insn);
 }
 
 /*
@@ -444,34 +417,11 @@ extern void arch_unoptimize_kprobes(struct list_head *oplist,
 				    struct list_head *done_list)
 {
 	struct optimized_kprobe *op, *tmp;
-	int c = 0;
 
 	list_for_each_entry_safe(op, tmp, oplist, list) {
-		/* Setup param */
-		setup_unoptimize_kprobe(&jump_poke_params[c],
-					jump_poke_bufs[c].buf, op);
+		arch_unoptimize_kprobe(op);
 		list_move(&op->list, done_list);
-		if (++c >= MAX_OPTIMIZE_PROBES)
-			break;
 	}
-
-	/*
-	 * text_poke_smp doesn't support NMI/MCE code modifying.
-	 * However, since kprobes itself also doesn't support NMI/MCE
-	 * code probing, it's not a problem.
-	 */
-	text_poke_smp_batch(jump_poke_params, c);
-}
-
-/* Replace a relative jump with a breakpoint (int3).  */
-void __kprobes arch_unoptimize_kprobe(struct optimized_kprobe *op)
-{
-	u8 buf[RELATIVEJUMP_SIZE];
-
-	/* Set int3 to first byte for kprobes */
-	buf[0] = BREAKPOINT_INSTRUCTION;
-	memcpy(buf + 1, op->optinsn.copied_insn, RELATIVE_ADDR_SIZE);
-	text_poke_smp(op->kp.addr, buf, RELATIVEJUMP_SIZE);
 }
 
 int  __kprobes
@@ -491,22 +441,3 @@ setup_detour_execution(struct kprobe *p, struct pt_regs *regs, int reenter)
 	}
 	return 0;
 }
-
-int __kprobes arch_init_optprobes(void)
-{
-	/* Allocate code buffer and parameter array */
-	jump_poke_bufs = kmalloc(sizeof(struct jump_poke_buffer) *
-				 MAX_OPTIMIZE_PROBES, GFP_KERNEL);
-	if (!jump_poke_bufs)
-		return -ENOMEM;
-
-	jump_poke_params = kmalloc(sizeof(struct text_poke_param) *
-				   MAX_OPTIMIZE_PROBES, GFP_KERNEL);
-	if (!jump_poke_params) {
-		kfree(jump_poke_bufs);
-		jump_poke_bufs = NULL;
-		return -ENOMEM;
-	}
-
-	return 0;
-}
diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index a96d32c..b2046e4 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -34,6 +34,7 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/kprobes.h>
+#include <linux/debugfs.h>
 #include <asm/timer.h>
 #include <asm/cpu.h>
 #include <asm/traps.h>
@@ -419,6 +420,7 @@ static void __init kvm_smp_prepare_boot_cpu(void)
 	WARN_ON(kvm_register_clock("primary cpu clock"));
 	kvm_guest_cpu_init();
 	native_smp_prepare_boot_cpu();
+	kvm_spinlock_init();
 }
 
 static void kvm_guest_cpu_online(void *dummy)
@@ -498,11 +500,9 @@ void __init kvm_guest_init(void)
 #endif
 }
 
-static bool __init kvm_detect(void)
+static uint32_t __init kvm_detect(void)
 {
-	if (!kvm_para_available())
-		return false;
-	return true;
+	return kvm_cpuid_base();
 }
 
 const struct hypervisor_x86 x86_hyper_kvm __refconst = {
@@ -523,3 +523,274 @@ static __init int activate_jump_labels(void)
 	return 0;
 }
 arch_initcall(activate_jump_labels);
+
+#ifdef CONFIG_PARAVIRT_SPINLOCKS
+
+/* Kick a cpu by its apicid. Used to wake up a halted vcpu */
+static void kvm_kick_cpu(int cpu)
+{
+	int apicid;
+	unsigned long flags = 0;
+
+	apicid = per_cpu(x86_cpu_to_apicid, cpu);
+	kvm_hypercall2(KVM_HC_KICK_CPU, flags, apicid);
+}
+
+enum kvm_contention_stat {
+	TAKEN_SLOW,
+	TAKEN_SLOW_PICKUP,
+	RELEASED_SLOW,
+	RELEASED_SLOW_KICKED,
+	NR_CONTENTION_STATS
+};
+
+#ifdef CONFIG_KVM_DEBUG_FS
+#define HISTO_BUCKETS	30
+
+static struct kvm_spinlock_stats
+{
+	u32 contention_stats[NR_CONTENTION_STATS];
+	u32 histo_spin_blocked[HISTO_BUCKETS+1];
+	u64 time_blocked;
+} spinlock_stats;
+
+static u8 zero_stats;
+
+static inline void check_zero(void)
+{
+	u8 ret;
+	u8 old;
+
+	old = ACCESS_ONCE(zero_stats);
+	if (unlikely(old)) {
+		ret = cmpxchg(&zero_stats, old, 0);
+		/* This ensures only one fellow resets the stat */
+		if (ret == old)
+			memset(&spinlock_stats, 0, sizeof(spinlock_stats));
+	}
+}
+
+static inline void add_stats(enum kvm_contention_stat var, u32 val)
+{
+	check_zero();
+	spinlock_stats.contention_stats[var] += val;
+}
+
+
+static inline u64 spin_time_start(void)
+{
+	return sched_clock();
+}
+
+static void __spin_time_accum(u64 delta, u32 *array)
+{
+	unsigned index;
+
+	index = ilog2(delta);
+	check_zero();
+
+	if (index < HISTO_BUCKETS)
+		array[index]++;
+	else
+		array[HISTO_BUCKETS]++;
+}
+
+static inline void spin_time_accum_blocked(u64 start)
+{
+	u32 delta;
+
+	delta = sched_clock() - start;
+	__spin_time_accum(delta, spinlock_stats.histo_spin_blocked);
+	spinlock_stats.time_blocked += delta;
+}
+
+static struct dentry *d_spin_debug;
+static struct dentry *d_kvm_debug;
+
+struct dentry *kvm_init_debugfs(void)
+{
+	d_kvm_debug = debugfs_create_dir("kvm-guest", NULL);
+	if (!d_kvm_debug)
+		printk(KERN_WARNING "Could not create 'kvm' debugfs directory\n");
+
+	return d_kvm_debug;
+}
+
+static int __init kvm_spinlock_debugfs(void)
+{
+	struct dentry *d_kvm;
+
+	d_kvm = kvm_init_debugfs();
+	if (d_kvm == NULL)
+		return -ENOMEM;
+
+	d_spin_debug = debugfs_create_dir("spinlocks", d_kvm);
+
+	debugfs_create_u8("zero_stats", 0644, d_spin_debug, &zero_stats);
+
+	debugfs_create_u32("taken_slow", 0444, d_spin_debug,
+		   &spinlock_stats.contention_stats[TAKEN_SLOW]);
+	debugfs_create_u32("taken_slow_pickup", 0444, d_spin_debug,
+		   &spinlock_stats.contention_stats[TAKEN_SLOW_PICKUP]);
+
+	debugfs_create_u32("released_slow", 0444, d_spin_debug,
+		   &spinlock_stats.contention_stats[RELEASED_SLOW]);
+	debugfs_create_u32("released_slow_kicked", 0444, d_spin_debug,
+		   &spinlock_stats.contention_stats[RELEASED_SLOW_KICKED]);
+
+	debugfs_create_u64("time_blocked", 0444, d_spin_debug,
+			   &spinlock_stats.time_blocked);
+
+	debugfs_create_u32_array("histo_blocked", 0444, d_spin_debug,
+		     spinlock_stats.histo_spin_blocked, HISTO_BUCKETS + 1);
+
+	return 0;
+}
+fs_initcall(kvm_spinlock_debugfs);
+#else  /* !CONFIG_KVM_DEBUG_FS */
+static inline void add_stats(enum kvm_contention_stat var, u32 val)
+{
+}
+
+static inline u64 spin_time_start(void)
+{
+	return 0;
+}
+
+static inline void spin_time_accum_blocked(u64 start)
+{
+}
+#endif  /* CONFIG_KVM_DEBUG_FS */
+
+struct kvm_lock_waiting {
+	struct arch_spinlock *lock;
+	__ticket_t want;
+};
+
+/* cpus 'waiting' on a spinlock to become available */
+static cpumask_t waiting_cpus;
+
+/* Track spinlock on which a cpu is waiting */
+static DEFINE_PER_CPU(struct kvm_lock_waiting, klock_waiting);
+
+static void kvm_lock_spinning(struct arch_spinlock *lock, __ticket_t want)
+{
+	struct kvm_lock_waiting *w;
+	int cpu;
+	u64 start;
+	unsigned long flags;
+
+	if (in_nmi())
+		return;
+
+	w = &__get_cpu_var(klock_waiting);
+	cpu = smp_processor_id();
+	start = spin_time_start();
+
+	/*
+	 * Make sure an interrupt handler can't upset things in a
+	 * partially setup state.
+	 */
+	local_irq_save(flags);
+
+	/*
+	 * The ordering protocol on this is that the "lock" pointer
+	 * may only be set non-NULL if the "want" ticket is correct.
+	 * If we're updating "want", we must first clear "lock".
+	 */
+	w->lock = NULL;
+	smp_wmb();
+	w->want = want;
+	smp_wmb();
+	w->lock = lock;
+
+	add_stats(TAKEN_SLOW, 1);
+
+	/*
+	 * This uses set_bit, which is atomic but we should not rely on its
+	 * reordering gurantees. So barrier is needed after this call.
+	 */
+	cpumask_set_cpu(cpu, &waiting_cpus);
+
+	barrier();
+
+	/*
+	 * Mark entry to slowpath before doing the pickup test to make
+	 * sure we don't deadlock with an unlocker.
+	 */
+	__ticket_enter_slowpath(lock);
+
+	/*
+	 * check again make sure it didn't become free while
+	 * we weren't looking.
+	 */
+	if (ACCESS_ONCE(lock->tickets.head) == want) {
+		add_stats(TAKEN_SLOW_PICKUP, 1);
+		goto out;
+	}
+
+	/*
+	 * halt until it's our turn and kicked. Note that we do safe halt
+	 * for irq enabled case to avoid hang when lock info is overwritten
+	 * in irq spinlock slowpath and no spurious interrupt occur to save us.
+	 */
+	if (arch_irqs_disabled_flags(flags))
+		halt();
+	else
+		safe_halt();
+
+out:
+	cpumask_clear_cpu(cpu, &waiting_cpus);
+	w->lock = NULL;
+	local_irq_restore(flags);
+	spin_time_accum_blocked(start);
+}
+PV_CALLEE_SAVE_REGS_THUNK(kvm_lock_spinning);
+
+/* Kick vcpu waiting on @lock->head to reach value @ticket */
+static void kvm_unlock_kick(struct arch_spinlock *lock, __ticket_t ticket)
+{
+	int cpu;
+
+	add_stats(RELEASED_SLOW, 1);
+	for_each_cpu(cpu, &waiting_cpus) {
+		const struct kvm_lock_waiting *w = &per_cpu(klock_waiting, cpu);
+		if (ACCESS_ONCE(w->lock) == lock &&
+		    ACCESS_ONCE(w->want) == ticket) {
+			add_stats(RELEASED_SLOW_KICKED, 1);
+			kvm_kick_cpu(cpu);
+			break;
+		}
+	}
+}
+
+/*
+ * Setup pv_lock_ops to exploit KVM_FEATURE_PV_UNHALT if present.
+ */
+void __init kvm_spinlock_init(void)
+{
+	if (!kvm_para_available())
+		return;
+	/* Does host kernel support KVM_FEATURE_PV_UNHALT? */
+	if (!kvm_para_has_feature(KVM_FEATURE_PV_UNHALT))
+		return;
+
+	pv_lock_ops.lock_spinning = PV_CALLEE_SAVE(kvm_lock_spinning);
+	pv_lock_ops.unlock_kick = kvm_unlock_kick;
+}
+
+static __init int kvm_spinlock_init_jump(void)
+{
+	if (!kvm_para_available())
+		return 0;
+	if (!kvm_para_has_feature(KVM_FEATURE_PV_UNHALT))
+		return 0;
+
+	static_key_slow_inc(&paravirt_ticketlocks_enabled);
+	printk(KERN_INFO "KVM setup paravirtual spinlock\n");
+
+	return 0;
+}
+early_initcall(kvm_spinlock_init_jump);
+
+#endif	/* CONFIG_PARAVIRT_SPINLOCKS */
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
index 7123b5d..af99f71 100644
--- a/arch/x86/kernel/microcode_amd.c
+++ b/arch/x86/kernel/microcode_amd.c
@@ -216,6 +216,7 @@ int apply_microcode_amd(int cpu)
 	/* need to apply patch? */
 	if (rev >= mc_amd->hdr.patch_id) {
 		c->microcode = rev;
+		uci->cpu_sig.rev = rev;
 		return 0;
 	}
 
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index ba77ebc..6fcb49c 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -113,10 +113,10 @@ static int __kprobes nmi_handle(unsigned int type, struct pt_regs *regs, bool b2
 		u64 before, delta, whole_msecs;
 		int remainder_ns, decimal_msecs, thishandled;
 
-		before = local_clock();
+		before = sched_clock();
 		thishandled = a->handler(type, regs);
 		handled += thishandled;
-		delta = local_clock() - before;
+		delta = sched_clock() - before;
 		trace_nmi_handler(a->handler, (int)delta, thishandled);
 
 		if (delta < nmi_longest_ns)
diff --git a/arch/x86/kernel/paravirt-spinlocks.c b/arch/x86/kernel/paravirt-spinlocks.c
index 676b8c7..bbb6c73 100644
--- a/arch/x86/kernel/paravirt-spinlocks.c
+++ b/arch/x86/kernel/paravirt-spinlocks.c
@@ -4,25 +4,17 @@
  */
 #include <linux/spinlock.h>
 #include <linux/module.h>
+#include <linux/jump_label.h>
 
 #include <asm/paravirt.h>
 
-static inline void
-default_spin_lock_flags(arch_spinlock_t *lock, unsigned long flags)
-{
-	arch_spin_lock(lock);
-}
-
 struct pv_lock_ops pv_lock_ops = {
 #ifdef CONFIG_SMP
-	.spin_is_locked = __ticket_spin_is_locked,
-	.spin_is_contended = __ticket_spin_is_contended,
-
-	.spin_lock = __ticket_spin_lock,
-	.spin_lock_flags = default_spin_lock_flags,
-	.spin_trylock = __ticket_spin_trylock,
-	.spin_unlock = __ticket_spin_unlock,
+	.lock_spinning = __PV_IS_CALLEE_SAVE(paravirt_nop),
+	.unlock_kick = paravirt_nop,
 #endif
 };
 EXPORT_SYMBOL(pv_lock_ops);
 
+struct static_key paravirt_ticketlocks_enabled = STATIC_KEY_INIT_FALSE;
+EXPORT_SYMBOL(paravirt_ticketlocks_enabled);
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index cd6de64..1b10af8 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -62,11 +62,6 @@ void __init default_banner(void)
 	       pv_info.name);
 }
 
-/* Simple instruction patching code. */
-#define DEF_NATIVE(ops, name, code)					\
-	extern const char start_##ops##_##name[], end_##ops##_##name[];	\
-	asm("start_" #ops "_" #name ": " code "; end_" #ops "_" #name ":")
-
 /* Undefined instruction for dealing with missing ops pointers. */
 static const unsigned char ud2a[] = { 0x0f, 0x0b };
 
@@ -324,7 +319,7 @@ struct pv_time_ops pv_time_ops = {
 	.steal_clock = native_steal_clock,
 };
 
-struct pv_irq_ops pv_irq_ops = {
+__visible struct pv_irq_ops pv_irq_ops = {
 	.save_fl = __PV_IS_CALLEE_SAVE(native_save_fl),
 	.restore_fl = __PV_IS_CALLEE_SAVE(native_restore_fl),
 	.irq_disable = __PV_IS_CALLEE_SAVE(native_irq_disable),
@@ -336,7 +331,7 @@ struct pv_irq_ops pv_irq_ops = {
 #endif
 };
 
-struct pv_cpu_ops pv_cpu_ops = {
+__visible struct pv_cpu_ops pv_cpu_ops = {
 	.cpuid = native_cpuid,
 	.get_debugreg = native_get_debugreg,
 	.set_debugreg = native_set_debugreg,
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 83369e5..c83516b 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -36,7 +36,7 @@
  * section. Since TSS's are completely CPU-local, we want them
  * on exact cacheline boundaries, to eliminate cacheline ping-pong.
  */
-DEFINE_PER_CPU_SHARED_ALIGNED(struct tss_struct, init_tss) = INIT_TSS;
+__visible DEFINE_PER_CPU_SHARED_ALIGNED(struct tss_struct, init_tss) = INIT_TSS;
 
 #ifdef CONFIG_X86_64
 static DEFINE_PER_CPU(unsigned char, is_idle);
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index f8adefc..884f98f 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -247,7 +247,7 @@ EXPORT_SYMBOL_GPL(start_thread);
  * the task-switch, and shows up in ret_from_fork in entry.S,
  * for example.
  */
-__notrace_funcgraph struct task_struct *
+__visible __notrace_funcgraph struct task_struct *
 __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 {
 	struct thread_struct *prev = &prev_p->thread,
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 05646ba..bb1dc51 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -52,7 +52,7 @@
 
 asmlinkage extern void ret_from_fork(void);
 
-DEFINE_PER_CPU(unsigned long, old_rsp);
+asmlinkage DEFINE_PER_CPU(unsigned long, old_rsp);
 
 /* Prints also some state that isn't saved in the pt_regs */
 void __show_regs(struct pt_regs *regs, int all)
@@ -274,7 +274,7 @@ void start_thread_ia32(struct pt_regs *regs, u32 new_ip, u32 new_sp)
  * Kprobes not supported here. Set the probe on schedule instead.
  * Function graph tracer not supported too.
  */
-__notrace_funcgraph struct task_struct *
+__visible __notrace_funcgraph struct task_struct *
 __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 {
 	struct thread_struct *prev = &prev_p->thread;
diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c
index 2cb9470..a16bae3 100644
--- a/arch/x86/kernel/pvclock.c
+++ b/arch/x86/kernel/pvclock.c
@@ -128,46 +128,7 @@ void pvclock_read_wallclock(struct pvclock_wall_clock *wall_clock,
 	set_normalized_timespec(ts, now.tv_sec, now.tv_nsec);
 }
 
-static struct pvclock_vsyscall_time_info *pvclock_vdso_info;
-
-static struct pvclock_vsyscall_time_info *
-pvclock_get_vsyscall_user_time_info(int cpu)
-{
-	if (!pvclock_vdso_info) {
-		BUG();
-		return NULL;
-	}
-
-	return &pvclock_vdso_info[cpu];
-}
-
-struct pvclock_vcpu_time_info *pvclock_get_vsyscall_time_info(int cpu)
-{
-	return &pvclock_get_vsyscall_user_time_info(cpu)->pvti;
-}
-
 #ifdef CONFIG_X86_64
-static int pvclock_task_migrate(struct notifier_block *nb, unsigned long l,
-			        void *v)
-{
-	struct task_migration_notifier *mn = v;
-	struct pvclock_vsyscall_time_info *pvti;
-
-	pvti = pvclock_get_vsyscall_user_time_info(mn->from_cpu);
-
-	/* this is NULL when pvclock vsyscall is not initialized */
-	if (unlikely(pvti == NULL))
-		return NOTIFY_DONE;
-
-	pvti->migrate_count++;
-
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block pvclock_migrate = {
-	.notifier_call = pvclock_task_migrate,
-};
-
 /*
  * Initialize the generic pvclock vsyscall state.  This will allocate
  * a/some page(s) for the per-vcpu pvclock information, set up a
@@ -181,17 +142,12 @@ int __init pvclock_init_vsyscall(struct pvclock_vsyscall_time_info *i,
 
 	WARN_ON (size != PVCLOCK_VSYSCALL_NR_PAGES*PAGE_SIZE);
 
-	pvclock_vdso_info = i;
-
 	for (idx = 0; idx <= (PVCLOCK_FIXMAP_END-PVCLOCK_FIXMAP_BEGIN); idx++) {
 		__set_fixmap(PVCLOCK_FIXMAP_BEGIN + idx,
 			     __pa(i) + (idx*PAGE_SIZE),
 			     PAGE_KERNEL_VVAR);
 	}
 
-
-	register_task_migration_notifier(&pvclock_migrate);
-
 	return 0;
 }
 #endif
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 563ed91..7e920bf 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -326,6 +326,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6320"),
 		},
 	},
+	{	/* Handle problems with rebooting on the Latitude E5410. */
+		.callback = set_pci_reboot,
+		.ident = "Dell Latitude E5410",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E5410"),
+		},
+	},
 	{	/* Handle problems with rebooting on the Latitude E5420. */
 		.callback = set_pci_reboot,
 		.ident = "Dell Latitude E5420",
@@ -352,12 +360,28 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 	},
 	{	/* Handle problems with rebooting on the Precision M6600. */
 		.callback = set_pci_reboot,
-		.ident = "Dell OptiPlex 990",
+		.ident = "Dell Precision M6600",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Precision M6600"),
 		},
 	},
+	{	/* Handle problems with rebooting on the Dell PowerEdge C6100. */
+		.callback = set_pci_reboot,
+		.ident = "Dell PowerEdge C6100",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "C6100"),
+		},
+	},
+	{	/* Some C6100 machines were shipped with vendor being 'Dell'. */
+		.callback = set_pci_reboot,
+		.ident = "Dell PowerEdge C6100",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "C6100"),
+		},
+	},
 	{ }
 };
 
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index f8ec578..f0de629 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -206,9 +206,9 @@ EXPORT_SYMBOL(boot_cpu_data);
 
 
 #if !defined(CONFIG_X86_PAE) || defined(CONFIG_X86_64)
-unsigned long mmu_cr4_features;
+__visible unsigned long mmu_cr4_features;
 #else
-unsigned long mmu_cr4_features = X86_CR4_PAE;
+__visible unsigned long mmu_cr4_features = X86_CR4_PAE;
 #endif
 
 /* Boot loader ID and version as integers, for the benefit of proc_dointvec */
@@ -426,25 +426,23 @@ static void __init reserve_initrd(void)
 static void __init parse_setup_data(void)
 {
 	struct setup_data *data;
-	u64 pa_data;
+	u64 pa_data, pa_next;
 
 	pa_data = boot_params.hdr.setup_data;
 	while (pa_data) {
-		u32 data_len, map_len;
+		u32 data_len, map_len, data_type;
 
 		map_len = max(PAGE_SIZE - (pa_data & ~PAGE_MASK),
 			      (u64)sizeof(struct setup_data));
 		data = early_memremap(pa_data, map_len);
 		data_len = data->len + sizeof(struct setup_data);
-		if (data_len > map_len) {
-			early_iounmap(data, map_len);
-			data = early_memremap(pa_data, data_len);
-			map_len = data_len;
-		}
+		data_type = data->type;
+		pa_next = data->next;
+		early_iounmap(data, map_len);
 
-		switch (data->type) {
+		switch (data_type) {
 		case SETUP_E820_EXT:
-			parse_e820_ext(data);
+			parse_e820_ext(pa_data, data_len);
 			break;
 		case SETUP_DTB:
 			add_dtb(pa_data);
@@ -452,8 +450,7 @@ static void __init parse_setup_data(void)
 		default:
 			break;
 		}
-		pa_data = data->next;
-		early_iounmap(data, map_len);
+		pa_data = pa_next;
 	}
 }
 
@@ -1070,7 +1067,7 @@ void __init setup_arch(char **cmdline_p)
 
 	cleanup_highmap();
 
-	memblock.current_limit = ISA_END_ADDRESS;
+	memblock_set_current_limit(ISA_END_ADDRESS);
 	memblock_x86_fill();
 
 	/*
@@ -1103,7 +1100,7 @@ void __init setup_arch(char **cmdline_p)
 
 	setup_real_mode();
 
-	memblock.current_limit = get_max_mapped();
+	memblock_set_current_limit(get_max_mapped());
 	dma_contiguous_reserve(0);
 
 	/*
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index cf91358..9e5de68 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -358,7 +358,7 @@ static int __setup_rt_frame(int sig, struct ksignal *ksig,
 		else
 			put_user_ex(0, &frame->uc.uc_flags);
 		put_user_ex(0, &frame->uc.uc_link);
-		err |= __save_altstack(&frame->uc.uc_stack, regs->sp);
+		save_altstack_ex(&frame->uc.uc_stack, regs->sp);
 
 		/* Set up to return from userspace.  */
 		restorer = VDSO32_SYMBOL(current->mm->context.vdso, rt_sigreturn);
@@ -423,7 +423,7 @@ static int __setup_rt_frame(int sig, struct ksignal *ksig,
 		else
 			put_user_ex(0, &frame->uc.uc_flags);
 		put_user_ex(0, &frame->uc.uc_link);
-		err |= __save_altstack(&frame->uc.uc_stack, regs->sp);
+		save_altstack_ex(&frame->uc.uc_stack, regs->sp);
 
 		/* Set up to return from userspace.  If provided, use a stub
 		   already in userspace.  */
@@ -490,7 +490,7 @@ static int x32_setup_rt_frame(struct ksignal *ksig,
 		else
 			put_user_ex(0, &frame->uc.uc_flags);
 		put_user_ex(0, &frame->uc.uc_link);
-		err |= __compat_save_altstack(&frame->uc.uc_stack, regs->sp);
+		compat_save_altstack_ex(&frame->uc.uc_stack, regs->sp);
 		put_user_ex(0, &frame->uc.uc__pad0);
 
 		if (ksig->ka.sa.sa_flags & SA_RESTORER) {
@@ -533,7 +533,7 @@ static int x32_setup_rt_frame(struct ksignal *ksig,
  * Do a signal return; undo the signal stack.
  */
 #ifdef CONFIG_X86_32
-unsigned long sys_sigreturn(void)
+asmlinkage unsigned long sys_sigreturn(void)
 {
 	struct pt_regs *regs = current_pt_regs();
 	struct sigframe __user *frame;
@@ -562,7 +562,7 @@ badframe:
 }
 #endif /* CONFIG_X86_32 */
 
-long sys_rt_sigreturn(void)
+asmlinkage long sys_rt_sigreturn(void)
 {
 	struct pt_regs *regs = current_pt_regs();
 	struct rt_sigframe __user *frame;
@@ -728,7 +728,7 @@ static void do_signal(struct pt_regs *regs)
  * notification of userspace execution resumption
  * - triggered by the TIF_WORK_MASK flags
  */
-void
+__visible void
 do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
 {
 	user_exit();
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index cdaa347..7c3a5a6 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -256,7 +256,7 @@ static inline void __smp_reschedule_interrupt(void)
 	scheduler_ipi();
 }
 
-void smp_reschedule_interrupt(struct pt_regs *regs)
+__visible void smp_reschedule_interrupt(struct pt_regs *regs)
 {
 	ack_APIC_irq();
 	__smp_reschedule_interrupt();
@@ -271,7 +271,7 @@ static inline void smp_entering_irq(void)
 	irq_enter();
 }
 
-void smp_trace_reschedule_interrupt(struct pt_regs *regs)
+__visible void smp_trace_reschedule_interrupt(struct pt_regs *regs)
 {
 	/*
 	 * Need to call irq_enter() before calling the trace point.
@@ -295,14 +295,14 @@ static inline void __smp_call_function_interrupt(void)
 	inc_irq_stat(irq_call_count);
 }
 
-void smp_call_function_interrupt(struct pt_regs *regs)
+__visible void smp_call_function_interrupt(struct pt_regs *regs)
 {
 	smp_entering_irq();
 	__smp_call_function_interrupt();
 	exiting_irq();
 }
 
-void smp_trace_call_function_interrupt(struct pt_regs *regs)
+__visible void smp_trace_call_function_interrupt(struct pt_regs *regs)
 {
 	smp_entering_irq();
 	trace_call_function_entry(CALL_FUNCTION_VECTOR);
@@ -317,14 +317,14 @@ static inline void __smp_call_function_single_interrupt(void)
 	inc_irq_stat(irq_call_count);
 }
 
-void smp_call_function_single_interrupt(struct pt_regs *regs)
+__visible void smp_call_function_single_interrupt(struct pt_regs *regs)
 {
 	smp_entering_irq();
 	__smp_call_function_single_interrupt();
 	exiting_irq();
 }
 
-void smp_trace_call_function_single_interrupt(struct pt_regs *regs)
+__visible void smp_trace_call_function_single_interrupt(struct pt_regs *regs)
 {
 	smp_entering_irq();
 	trace_call_function_single_entry(CALL_FUNCTION_SINGLE_VECTOR);
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index aecc98a..6cacab6 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -653,6 +653,7 @@ static void announce_cpu(int cpu, int apicid)
 {
 	static int current_node = -1;
 	int node = early_cpu_to_node(cpu);
+	int max_cpu_present = find_last_bit(cpumask_bits(cpu_present_mask), NR_CPUS);
 
 	if (system_state == SYSTEM_BOOTING) {
 		if (node != current_node) {
@@ -661,7 +662,7 @@ static void announce_cpu(int cpu, int apicid)
 			current_node = node;
 			pr_info("Booting Node %3d, Processors ", node);
 		}
-		pr_cont(" #%d%s", cpu, cpu == (nr_cpu_ids - 1) ? " OK\n" : "");
+		pr_cont(" #%4d%s", cpu, cpu == max_cpu_present ? " OK\n" : "");
 		return;
 	} else
 		pr_info("Booting Node %d Processor %d APIC 0x%x\n",
diff --git a/arch/x86/kernel/syscall_32.c b/arch/x86/kernel/syscall_32.c
index 147fcd4..e9bcd57 100644
--- a/arch/x86/kernel/syscall_32.c
+++ b/arch/x86/kernel/syscall_32.c
@@ -15,7 +15,7 @@ typedef asmlinkage void (*sys_call_ptr_t)(void);
 
 extern asmlinkage void sys_ni_syscall(void);
 
-const sys_call_ptr_t sys_call_table[__NR_syscall_max+1] = {
+__visible const sys_call_ptr_t sys_call_table[__NR_syscall_max+1] = {
 	/*
 	 * Smells like a compiler bug -- it doesn't work
 	 * when the & below is removed.
diff --git a/arch/x86/kernel/syscall_64.c b/arch/x86/kernel/syscall_64.c
index 5c7f8c2..4ac730b 100644
--- a/arch/x86/kernel/syscall_64.c
+++ b/arch/x86/kernel/syscall_64.c
@@ -4,6 +4,7 @@
 #include <linux/sys.h>
 #include <linux/cache.h>
 #include <asm/asm-offsets.h>
+#include <asm/syscall.h>
 
 #define __SYSCALL_COMMON(nr, sym, compat) __SYSCALL_64(nr, sym, compat)
 
@@ -19,11 +20,9 @@
 
 #define __SYSCALL_64(nr, sym, compat) [nr] = sym,
 
-typedef void (*sys_call_ptr_t)(void);
-
 extern void sys_ni_syscall(void);
 
-const sys_call_ptr_t sys_call_table[__NR_syscall_max+1] = {
+asmlinkage const sys_call_ptr_t sys_call_table[__NR_syscall_max+1] = {
 	/*
 	 * Smells like a compiler bug -- it doesn't work
 	 * when the & below is removed.
diff --git a/arch/x86/kernel/sysfb.c b/arch/x86/kernel/sysfb.c
new file mode 100644
index 0000000..193ec2c
--- /dev/null
+++ b/arch/x86/kernel/sysfb.c
@@ -0,0 +1,74 @@
+/*
+ * Generic System Framebuffers on x86
+ * Copyright (c) 2012-2013 David Herrmann <dh.herrmann@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+/*
+ * Simple-Framebuffer support for x86 systems
+ * Create a platform-device for any available boot framebuffer. The
+ * simple-framebuffer platform device is already available on DT systems, so
+ * this module parses the global "screen_info" object and creates a suitable
+ * platform device compatible with the "simple-framebuffer" DT object. If
+ * the framebuffer is incompatible, we instead create a legacy
+ * "vesa-framebuffer", "efi-framebuffer" or "platform-framebuffer" device and
+ * pass the screen_info as platform_data. This allows legacy drivers
+ * to pick these devices up without messing with simple-framebuffer drivers.
+ * The global "screen_info" is still valid at all times.
+ *
+ * If CONFIG_X86_SYSFB is not selected, we never register "simple-framebuffer"
+ * platform devices, but only use legacy framebuffer devices for
+ * backwards compatibility.
+ *
+ * TODO: We set the dev_id field of all platform-devices to 0. This allows
+ * other x86 OF/DT parsers to create such devices, too. However, they must
+ * start at offset 1 for this to work.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/platform_data/simplefb.h>
+#include <linux/platform_device.h>
+#include <linux/screen_info.h>
+#include <asm/sysfb.h>
+
+static __init int sysfb_init(void)
+{
+	struct screen_info *si = &screen_info;
+	struct simplefb_platform_data mode;
+	struct platform_device *pd;
+	const char *name;
+	bool compatible;
+	int ret;
+
+	sysfb_apply_efi_quirks();
+
+	/* try to create a simple-framebuffer device */
+	compatible = parse_mode(si, &mode);
+	if (compatible) {
+		ret = create_simplefb(si, &mode);
+		if (!ret)
+			return 0;
+	}
+
+	/* if the FB is incompatible, create a legacy framebuffer device */
+	if (si->orig_video_isVGA == VIDEO_TYPE_EFI)
+		name = "efi-framebuffer";
+	else if (si->orig_video_isVGA == VIDEO_TYPE_VLFB)
+		name = "vesa-framebuffer";
+	else
+		name = "platform-framebuffer";
+
+	pd = platform_device_register_resndata(NULL, name, 0,
+					       NULL, 0, si, sizeof(*si));
+	return IS_ERR(pd) ? PTR_ERR(pd) : 0;
+}
+
+/* must execute after PCI subsystem for EFI quirks */
+device_initcall(sysfb_init);
diff --git a/arch/x86/kernel/sysfb_efi.c b/arch/x86/kernel/sysfb_efi.c
new file mode 100644
index 0000000..b285d4e
--- /dev/null
+++ b/arch/x86/kernel/sysfb_efi.c
@@ -0,0 +1,214 @@
+/*
+ * Generic System Framebuffers on x86
+ * Copyright (c) 2012-2013 David Herrmann <dh.herrmann@gmail.com>
+ *
+ * EFI Quirks Copyright (c) 2006 Edgar Hucek <gimli@dark-green.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+/*
+ * EFI Quirks
+ * Several EFI systems do not correctly advertise their boot framebuffers.
+ * Hence, we use this static table of known broken machines and fix up the
+ * information so framebuffer drivers can load corectly.
+ */
+
+#include <linux/dmi.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/pci.h>
+#include <linux/screen_info.h>
+#include <video/vga.h>
+#include <asm/sysfb.h>
+
+enum {
+	OVERRIDE_NONE = 0x0,
+	OVERRIDE_BASE = 0x1,
+	OVERRIDE_STRIDE = 0x2,
+	OVERRIDE_HEIGHT = 0x4,
+	OVERRIDE_WIDTH = 0x8,
+};
+
+struct efifb_dmi_info efifb_dmi_list[] = {
+	[M_I17] = { "i17", 0x80010000, 1472 * 4, 1440, 900, OVERRIDE_NONE },
+	[M_I20] = { "i20", 0x80010000, 1728 * 4, 1680, 1050, OVERRIDE_NONE }, /* guess */
+	[M_I20_SR] = { "imac7", 0x40010000, 1728 * 4, 1680, 1050, OVERRIDE_NONE },
+	[M_I24] = { "i24", 0x80010000, 2048 * 4, 1920, 1200, OVERRIDE_NONE }, /* guess */
+	[M_I24_8_1] = { "imac8", 0xc0060000, 2048 * 4, 1920, 1200, OVERRIDE_NONE },
+	[M_I24_10_1] = { "imac10", 0xc0010000, 2048 * 4, 1920, 1080, OVERRIDE_NONE },
+	[M_I27_11_1] = { "imac11", 0xc0010000, 2560 * 4, 2560, 1440, OVERRIDE_NONE },
+	[M_MINI]= { "mini", 0x80000000, 2048 * 4, 1024, 768, OVERRIDE_NONE },
+	[M_MINI_3_1] = { "mini31", 0x40010000, 1024 * 4, 1024, 768, OVERRIDE_NONE },
+	[M_MINI_4_1] = { "mini41", 0xc0010000, 2048 * 4, 1920, 1200, OVERRIDE_NONE },
+	[M_MB] = { "macbook", 0x80000000, 2048 * 4, 1280, 800, OVERRIDE_NONE },
+	[M_MB_5_1] = { "macbook51", 0x80010000, 2048 * 4, 1280, 800, OVERRIDE_NONE },
+	[M_MB_6_1] = { "macbook61", 0x80010000, 2048 * 4, 1280, 800, OVERRIDE_NONE },
+	[M_MB_7_1] = { "macbook71", 0x80010000, 2048 * 4, 1280, 800, OVERRIDE_NONE },
+	[M_MBA] = { "mba", 0x80000000, 2048 * 4, 1280, 800, OVERRIDE_NONE },
+	/* 11" Macbook Air 3,1 passes the wrong stride */
+	[M_MBA_3] = { "mba3", 0, 2048 * 4, 0, 0, OVERRIDE_STRIDE },
+	[M_MBP] = { "mbp", 0x80010000, 1472 * 4, 1440, 900, OVERRIDE_NONE },
+	[M_MBP_2] = { "mbp2", 0, 0, 0, 0, OVERRIDE_NONE }, /* placeholder */
+	[M_MBP_2_2] = { "mbp22", 0x80010000, 1472 * 4, 1440, 900, OVERRIDE_NONE },
+	[M_MBP_SR] = { "mbp3", 0x80030000, 2048 * 4, 1440, 900, OVERRIDE_NONE },
+	[M_MBP_4] = { "mbp4", 0xc0060000, 2048 * 4, 1920, 1200, OVERRIDE_NONE },
+	[M_MBP_5_1] = { "mbp51", 0xc0010000, 2048 * 4, 1440, 900, OVERRIDE_NONE },
+	[M_MBP_5_2] = { "mbp52", 0xc0010000, 2048 * 4, 1920, 1200, OVERRIDE_NONE },
+	[M_MBP_5_3] = { "mbp53", 0xd0010000, 2048 * 4, 1440, 900, OVERRIDE_NONE },
+	[M_MBP_6_1] = { "mbp61", 0x90030000, 2048 * 4, 1920, 1200, OVERRIDE_NONE },
+	[M_MBP_6_2] = { "mbp62", 0x90030000, 2048 * 4, 1680, 1050, OVERRIDE_NONE },
+	[M_MBP_7_1] = { "mbp71", 0xc0010000, 2048 * 4, 1280, 800, OVERRIDE_NONE },
+	[M_MBP_8_2] = { "mbp82", 0x90010000, 1472 * 4, 1440, 900, OVERRIDE_NONE },
+	[M_UNKNOWN] = { NULL, 0, 0, 0, 0, OVERRIDE_NONE }
+};
+
+#define choose_value(dmivalue, fwvalue, field, flags) ({	\
+		typeof(fwvalue) _ret_ = fwvalue;		\
+		if ((flags) & (field))				\
+			_ret_ = dmivalue;			\
+		else if ((fwvalue) == 0)			\
+			_ret_ = dmivalue;			\
+		_ret_;						\
+	})
+
+static int __init efifb_set_system(const struct dmi_system_id *id)
+{
+	struct efifb_dmi_info *info = id->driver_data;
+
+	if (info->base == 0 && info->height == 0 && info->width == 0 &&
+	    info->stride == 0)
+		return 0;
+
+	/* Trust the bootloader over the DMI tables */
+	if (screen_info.lfb_base == 0) {
+#if defined(CONFIG_PCI)
+		struct pci_dev *dev = NULL;
+		int found_bar = 0;
+#endif
+		if (info->base) {
+			screen_info.lfb_base = choose_value(info->base,
+				screen_info.lfb_base, OVERRIDE_BASE,
+				info->flags);
+
+#if defined(CONFIG_PCI)
+			/* make sure that the address in the table is actually
+			 * on a VGA device's PCI BAR */
+
+			for_each_pci_dev(dev) {
+				int i;
+				if ((dev->class >> 8) != PCI_CLASS_DISPLAY_VGA)
+					continue;
+				for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+					resource_size_t start, end;
+
+					start = pci_resource_start(dev, i);
+					if (start == 0)
+						break;
+					end = pci_resource_end(dev, i);
+					if (screen_info.lfb_base >= start &&
+					    screen_info.lfb_base < end) {
+						found_bar = 1;
+					}
+				}
+			}
+			if (!found_bar)
+				screen_info.lfb_base = 0;
+#endif
+		}
+	}
+	if (screen_info.lfb_base) {
+		screen_info.lfb_linelength = choose_value(info->stride,
+			screen_info.lfb_linelength, OVERRIDE_STRIDE,
+			info->flags);
+		screen_info.lfb_width = choose_value(info->width,
+			screen_info.lfb_width, OVERRIDE_WIDTH,
+			info->flags);
+		screen_info.lfb_height = choose_value(info->height,
+			screen_info.lfb_height, OVERRIDE_HEIGHT,
+			info->flags);
+		if (screen_info.orig_video_isVGA == 0)
+			screen_info.orig_video_isVGA = VIDEO_TYPE_EFI;
+	} else {
+		screen_info.lfb_linelength = 0;
+		screen_info.lfb_width = 0;
+		screen_info.lfb_height = 0;
+		screen_info.orig_video_isVGA = 0;
+		return 0;
+	}
+
+	printk(KERN_INFO "efifb: dmi detected %s - framebuffer at 0x%08x "
+			 "(%dx%d, stride %d)\n", id->ident,
+			 screen_info.lfb_base, screen_info.lfb_width,
+			 screen_info.lfb_height, screen_info.lfb_linelength);
+
+	return 1;
+}
+
+#define EFIFB_DMI_SYSTEM_ID(vendor, name, enumid)		\
+	{							\
+		efifb_set_system,				\
+		name,						\
+		{						\
+			DMI_MATCH(DMI_BIOS_VENDOR, vendor),	\
+			DMI_MATCH(DMI_PRODUCT_NAME, name)	\
+		},						\
+		&efifb_dmi_list[enumid]				\
+	}
+
+static const struct dmi_system_id efifb_dmi_system_table[] __initconst = {
+	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "iMac4,1", M_I17),
+	/* At least one of these two will be right; maybe both? */
+	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "iMac5,1", M_I20),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "iMac5,1", M_I20),
+	/* At least one of these two will be right; maybe both? */
+	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "iMac6,1", M_I24),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "iMac6,1", M_I24),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "iMac7,1", M_I20_SR),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "iMac8,1", M_I24_8_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "iMac10,1", M_I24_10_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "iMac11,1", M_I27_11_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "Macmini1,1", M_MINI),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "Macmini3,1", M_MINI_3_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "Macmini4,1", M_MINI_4_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBook1,1", M_MB),
+	/* At least one of these two will be right; maybe both? */
+	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBook2,1", M_MB),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook2,1", M_MB),
+	/* At least one of these two will be right; maybe both? */
+	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBook3,1", M_MB),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook3,1", M_MB),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook4,1", M_MB),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook5,1", M_MB_5_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook6,1", M_MB_6_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook7,1", M_MB_7_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookAir1,1", M_MBA),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookAir3,1", M_MBA_3),
+	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro1,1", M_MBP),
+	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro2,1", M_MBP_2),
+	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro2,2", M_MBP_2_2),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro2,1", M_MBP_2),
+	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro3,1", M_MBP_SR),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro3,1", M_MBP_SR),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro4,1", M_MBP_4),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro5,1", M_MBP_5_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro5,2", M_MBP_5_2),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro5,3", M_MBP_5_3),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro6,1", M_MBP_6_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro6,2", M_MBP_6_2),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro7,1", M_MBP_7_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro8,2", M_MBP_8_2),
+	{},
+};
+
+__init void sysfb_apply_efi_quirks(void)
+{
+	if (screen_info.orig_video_isVGA != VIDEO_TYPE_EFI ||
+	    !(screen_info.capabilities & VIDEO_CAPABILITY_SKIP_QUIRKS))
+		dmi_check_system(efifb_dmi_system_table);
+}
diff --git a/arch/x86/kernel/sysfb_simplefb.c b/arch/x86/kernel/sysfb_simplefb.c
new file mode 100644
index 0000000..86179d4
--- /dev/null
+++ b/arch/x86/kernel/sysfb_simplefb.c
@@ -0,0 +1,95 @@
+/*
+ * Generic System Framebuffers on x86
+ * Copyright (c) 2012-2013 David Herrmann <dh.herrmann@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+/*
+ * simple-framebuffer probing
+ * Try to convert "screen_info" into a "simple-framebuffer" compatible mode.
+ * If the mode is incompatible, we return "false" and let the caller create
+ * legacy nodes instead.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/platform_data/simplefb.h>
+#include <linux/platform_device.h>
+#include <linux/screen_info.h>
+#include <asm/sysfb.h>
+
+static const char simplefb_resname[] = "BOOTFB";
+static const struct simplefb_format formats[] = SIMPLEFB_FORMATS;
+
+/* try parsing x86 screen_info into a simple-framebuffer mode struct */
+__init bool parse_mode(const struct screen_info *si,
+		       struct simplefb_platform_data *mode)
+{
+	const struct simplefb_format *f;
+	__u8 type;
+	unsigned int i;
+
+	type = si->orig_video_isVGA;
+	if (type != VIDEO_TYPE_VLFB && type != VIDEO_TYPE_EFI)
+		return false;
+
+	for (i = 0; i < ARRAY_SIZE(formats); ++i) {
+		f = &formats[i];
+		if (si->lfb_depth == f->bits_per_pixel &&
+		    si->red_size == f->red.length &&
+		    si->red_pos == f->red.offset &&
+		    si->green_size == f->green.length &&
+		    si->green_pos == f->green.offset &&
+		    si->blue_size == f->blue.length &&
+		    si->blue_pos == f->blue.offset &&
+		    si->rsvd_size == f->transp.length &&
+		    si->rsvd_pos == f->transp.offset) {
+			mode->format = f->name;
+			mode->width = si->lfb_width;
+			mode->height = si->lfb_height;
+			mode->stride = si->lfb_linelength;
+			return true;
+		}
+	}
+
+	return false;
+}
+
+__init int create_simplefb(const struct screen_info *si,
+			   const struct simplefb_platform_data *mode)
+{
+	struct platform_device *pd;
+	struct resource res;
+	unsigned long len;
+
+	/* don't use lfb_size as it may contain the whole VMEM instead of only
+	 * the part that is occupied by the framebuffer */
+	len = mode->height * mode->stride;
+	len = PAGE_ALIGN(len);
+	if (len > (u64)si->lfb_size << 16) {
+		printk(KERN_WARNING "sysfb: VRAM smaller than advertised\n");
+		return -EINVAL;
+	}
+
+	/* setup IORESOURCE_MEM as framebuffer memory */
+	memset(&res, 0, sizeof(res));
+	res.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+	res.name = simplefb_resname;
+	res.start = si->lfb_base;
+	res.end = si->lfb_base + len - 1;
+	if (res.end <= res.start)
+		return -EINVAL;
+
+	pd = platform_device_register_resndata(NULL, "simple-framebuffer", 0,
+					       &res, 1, mode, sizeof(*mode));
+	if (IS_ERR(pd))
+		return PTR_ERR(pd);
+
+	return 0;
+}
diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c
index addf7b5..91a4496 100644
--- a/arch/x86/kernel/tboot.c
+++ b/arch/x86/kernel/tboot.c
@@ -301,6 +301,15 @@ static int tboot_sleep(u8 sleep_state, u32 pm1a_control, u32 pm1b_control)
 	return 0;
 }
 
+static int tboot_extended_sleep(u8 sleep_state, u32 val_a, u32 val_b)
+{
+	if (!tboot_enabled())
+		return 0;
+
+	pr_warning("tboot is not able to suspend on platforms with reduced hardware sleep (ACPIv5)");
+	return -ENODEV;
+}
+
 static atomic_t ap_wfs_count;
 
 static int tboot_wait_for_aps(int num_aps)
@@ -422,6 +431,7 @@ static __init int tboot_late_init(void)
 #endif
 
 	acpi_os_set_prepare_sleep(&tboot_sleep);
+	acpi_os_set_prepare_extended_sleep(&tboot_extended_sleep);
 	return 0;
 }
 
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 1b23a1c..8c8093b 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -58,6 +58,7 @@
 #include <asm/mce.h>
 #include <asm/fixmap.h>
 #include <asm/mach_traps.h>
+#include <asm/alternative.h>
 
 #ifdef CONFIG_X86_64
 #include <asm/x86_init.h>
@@ -327,6 +328,9 @@ dotraplinkage void __kprobes notrace do_int3(struct pt_regs *regs, long error_co
 	    ftrace_int3_handler(regs))
 		return;
 #endif
+	if (poke_int3_handler(regs))
+		return;
+
 	prev_state = exception_enter();
 #ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
 	if (kgdb_ll_trap(DIE_INT3, "int3", regs, error_code, X86_TRAP_BP,
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 6ff4924..930e5d4 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -89,6 +89,12 @@ int check_tsc_unstable(void)
 }
 EXPORT_SYMBOL_GPL(check_tsc_unstable);
 
+int check_tsc_disabled(void)
+{
+	return tsc_disabled;
+}
+EXPORT_SYMBOL_GPL(check_tsc_disabled);
+
 #ifdef CONFIG_X86_TSC
 int __init notsc_setup(char *str)
 {
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 5f24c71..8ce0072 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -107,6 +107,8 @@ struct x86_platform_ops x86_platform = {
 };
 
 EXPORT_SYMBOL_GPL(x86_platform);
+
+#if defined(CONFIG_PCI_MSI)
 struct x86_msi_ops x86_msi = {
 	.setup_msi_irqs		= native_setup_msi_irqs,
 	.compose_msi_msg	= native_compose_msi_msg,
@@ -116,6 +118,28 @@ struct x86_msi_ops x86_msi = {
 	.setup_hpet_msi		= default_setup_hpet_msi,
 };
 
+/* MSI arch specific hooks */
+int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+{
+	return x86_msi.setup_msi_irqs(dev, nvec, type);
+}
+
+void arch_teardown_msi_irqs(struct pci_dev *dev)
+{
+	x86_msi.teardown_msi_irqs(dev);
+}
+
+void arch_teardown_msi_irq(unsigned int irq)
+{
+	x86_msi.teardown_msi_irq(irq);
+}
+
+void arch_restore_msi_irqs(struct pci_dev *dev, int irq)
+{
+	x86_msi.restore_msi_irqs(dev, irq);
+}
+#endif
+
 struct x86_io_apic_ops x86_io_apic_ops = {
 	.init			= native_io_apic_init_mappings,
 	.read			= native_io_apic_read,
diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c
index a20ecb5..b110fe6 100644
--- a/arch/x86/kvm/cpuid.c
+++ b/arch/x86/kvm/cpuid.c
@@ -413,7 +413,8 @@ static int do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 			     (1 << KVM_FEATURE_CLOCKSOURCE2) |
 			     (1 << KVM_FEATURE_ASYNC_PF) |
 			     (1 << KVM_FEATURE_PV_EOI) |
-			     (1 << KVM_FEATURE_CLOCKSOURCE_STABLE_BIT);
+			     (1 << KVM_FEATURE_CLOCKSOURCE_STABLE_BIT) |
+			     (1 << KVM_FEATURE_PV_UNHALT);
 
 		if (sched_info_on())
 			entry->eax |= (1 << KVM_FEATURE_STEAL_TIME);
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 2bc1e81..ddc3f3d 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -2025,6 +2025,17 @@ static int em_ret_far(struct x86_emulate_ctxt *ctxt)
 	return rc;
 }
 
+static int em_ret_far_imm(struct x86_emulate_ctxt *ctxt)
+{
+        int rc;
+
+        rc = em_ret_far(ctxt);
+        if (rc != X86EMUL_CONTINUE)
+                return rc;
+        rsp_increment(ctxt, ctxt->src.val);
+        return X86EMUL_CONTINUE;
+}
+
 static int em_cmpxchg(struct x86_emulate_ctxt *ctxt)
 {
 	/* Save real source value, then compare EAX against destination. */
@@ -3763,7 +3774,8 @@ static const struct opcode opcode_table[256] = {
 	G(ByteOp, group11), G(0, group11),
 	/* 0xC8 - 0xCF */
 	I(Stack | SrcImmU16 | Src2ImmByte, em_enter), I(Stack, em_leave),
-	N, I(ImplicitOps | Stack, em_ret_far),
+	I(ImplicitOps | Stack | SrcImmU16, em_ret_far_imm),
+	I(ImplicitOps | Stack, em_ret_far),
 	D(ImplicitOps), DI(SrcImmByte, intn),
 	D(ImplicitOps | No64), II(ImplicitOps, em_iret, iret),
 	/* 0xD0 - 0xD7 */
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index afc1124..5439117 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -79,16 +79,6 @@ static inline void apic_set_reg(struct kvm_lapic *apic, int reg_off, u32 val)
 	*((u32 *) (apic->regs + reg_off)) = val;
 }
 
-static inline int apic_test_and_set_vector(int vec, void *bitmap)
-{
-	return test_and_set_bit(VEC_POS(vec), (bitmap) + REG_POS(vec));
-}
-
-static inline int apic_test_and_clear_vector(int vec, void *bitmap)
-{
-	return test_and_clear_bit(VEC_POS(vec), (bitmap) + REG_POS(vec));
-}
-
 static inline int apic_test_vector(int vec, void *bitmap)
 {
 	return test_bit(VEC_POS(vec), (bitmap) + REG_POS(vec));
@@ -331,10 +321,10 @@ void kvm_apic_update_irr(struct kvm_vcpu *vcpu, u32 *pir)
 }
 EXPORT_SYMBOL_GPL(kvm_apic_update_irr);
 
-static inline int apic_test_and_set_irr(int vec, struct kvm_lapic *apic)
+static inline void apic_set_irr(int vec, struct kvm_lapic *apic)
 {
 	apic->irr_pending = true;
-	return apic_test_and_set_vector(vec, apic->regs + APIC_IRR);
+	apic_set_vector(vec, apic->regs + APIC_IRR);
 }
 
 static inline int apic_search_irr(struct kvm_lapic *apic)
@@ -681,32 +671,28 @@ static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode,
 		if (unlikely(!apic_enabled(apic)))
 			break;
 
+		result = 1;
+
 		if (dest_map)
 			__set_bit(vcpu->vcpu_id, dest_map);
 
-		if (kvm_x86_ops->deliver_posted_interrupt) {
-			result = 1;
+		if (kvm_x86_ops->deliver_posted_interrupt)
 			kvm_x86_ops->deliver_posted_interrupt(vcpu, vector);
-		} else {
-			result = !apic_test_and_set_irr(vector, apic);
-
-			if (!result) {
-				if (trig_mode)
-					apic_debug("level trig mode repeatedly "
-						"for vector %d", vector);
-				goto out;
-			}
+		else {
+			apic_set_irr(vector, apic);
 
 			kvm_make_request(KVM_REQ_EVENT, vcpu);
 			kvm_vcpu_kick(vcpu);
 		}
-out:
 		trace_kvm_apic_accept_irq(vcpu->vcpu_id, delivery_mode,
-				trig_mode, vector, !result);
+					  trig_mode, vector, false);
 		break;
 
 	case APIC_DM_REMRD:
-		apic_debug("Ignoring delivery mode 3\n");
+		result = 1;
+		vcpu->arch.pv.pv_unhalted = 1;
+		kvm_make_request(KVM_REQ_EVENT, vcpu);
+		kvm_vcpu_kick(vcpu);
 		break;
 
 	case APIC_DM_SMI:
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 9e9285a..dce0df8 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -132,8 +132,8 @@ module_param(dbg, bool, 0644);
 	(PAGE_MASK & ~((1ULL << (PAGE_SHIFT + (((level) - 1) \
 					    * PT32_LEVEL_BITS))) - 1))
 
-#define PT64_PERM_MASK (PT_PRESENT_MASK | PT_WRITABLE_MASK | PT_USER_MASK \
-			| PT64_NX_MASK)
+#define PT64_PERM_MASK (PT_PRESENT_MASK | PT_WRITABLE_MASK | shadow_user_mask \
+			| shadow_x_mask | shadow_nx_mask)
 
 #define ACC_EXEC_MASK    1
 #define ACC_WRITE_MASK   PT_WRITABLE_MASK
@@ -331,11 +331,6 @@ static int is_large_pte(u64 pte)
 	return pte & PT_PAGE_SIZE_MASK;
 }
 
-static int is_dirty_gpte(unsigned long pte)
-{
-	return pte & PT_DIRTY_MASK;
-}
-
 static int is_rmap_spte(u64 pte)
 {
 	return is_shadow_present_pte(pte);
@@ -2052,12 +2047,18 @@ static void shadow_walk_next(struct kvm_shadow_walk_iterator *iterator)
 	return __shadow_walk_next(iterator, *iterator->sptep);
 }
 
-static void link_shadow_page(u64 *sptep, struct kvm_mmu_page *sp)
+static void link_shadow_page(u64 *sptep, struct kvm_mmu_page *sp, bool accessed)
 {
 	u64 spte;
 
+	BUILD_BUG_ON(VMX_EPT_READABLE_MASK != PT_PRESENT_MASK ||
+			VMX_EPT_WRITABLE_MASK != PT_WRITABLE_MASK);
+
 	spte = __pa(sp->spt) | PT_PRESENT_MASK | PT_WRITABLE_MASK |
-	       shadow_user_mask | shadow_x_mask | shadow_accessed_mask;
+	       shadow_user_mask | shadow_x_mask;
+
+	if (accessed)
+		spte |= shadow_accessed_mask;
 
 	mmu_spte_set(sptep, spte);
 }
@@ -2574,14 +2575,6 @@ static void nonpaging_new_cr3(struct kvm_vcpu *vcpu)
 	mmu_free_roots(vcpu);
 }
 
-static bool is_rsvd_bits_set(struct kvm_mmu *mmu, u64 gpte, int level)
-{
-	int bit7;
-
-	bit7 = (gpte >> 7) & 1;
-	return (gpte & mmu->rsvd_bits_mask[bit7][level-1]) != 0;
-}
-
 static pfn_t pte_prefetch_gfn_to_pfn(struct kvm_vcpu *vcpu, gfn_t gfn,
 				     bool no_dirty_log)
 {
@@ -2594,26 +2587,6 @@ static pfn_t pte_prefetch_gfn_to_pfn(struct kvm_vcpu *vcpu, gfn_t gfn,
 	return gfn_to_pfn_memslot_atomic(slot, gfn);
 }
 
-static bool prefetch_invalid_gpte(struct kvm_vcpu *vcpu,
-				  struct kvm_mmu_page *sp, u64 *spte,
-				  u64 gpte)
-{
-	if (is_rsvd_bits_set(&vcpu->arch.mmu, gpte, PT_PAGE_TABLE_LEVEL))
-		goto no_present;
-
-	if (!is_present_gpte(gpte))
-		goto no_present;
-
-	if (!(gpte & PT_ACCESSED_MASK))
-		goto no_present;
-
-	return false;
-
-no_present:
-	drop_spte(vcpu->kvm, spte);
-	return true;
-}
-
 static int direct_pte_prefetch_many(struct kvm_vcpu *vcpu,
 				    struct kvm_mmu_page *sp,
 				    u64 *start, u64 *end)
@@ -2710,7 +2683,7 @@ static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
 					      iterator.level - 1,
 					      1, ACC_ALL, iterator.sptep);
 
-			link_shadow_page(iterator.sptep, sp);
+			link_shadow_page(iterator.sptep, sp, true);
 		}
 	}
 	return emulate;
@@ -2808,7 +2781,7 @@ exit:
 	return ret;
 }
 
-static bool page_fault_can_be_fast(struct kvm_vcpu *vcpu, u32 error_code)
+static bool page_fault_can_be_fast(u32 error_code)
 {
 	/*
 	 * Do not fix the mmio spte with invalid generation number which
@@ -2861,7 +2834,7 @@ static bool fast_page_fault(struct kvm_vcpu *vcpu, gva_t gva, int level,
 	bool ret = false;
 	u64 spte = 0ull;
 
-	if (!page_fault_can_be_fast(vcpu, error_code))
+	if (!page_fault_can_be_fast(error_code))
 		return false;
 
 	walk_shadow_page_lockless_begin(vcpu);
@@ -3209,6 +3182,7 @@ void kvm_mmu_sync_roots(struct kvm_vcpu *vcpu)
 	mmu_sync_roots(vcpu);
 	spin_unlock(&vcpu->kvm->mmu_lock);
 }
+EXPORT_SYMBOL_GPL(kvm_mmu_sync_roots);
 
 static gpa_t nonpaging_gva_to_gpa(struct kvm_vcpu *vcpu, gva_t vaddr,
 				  u32 access, struct x86_exception *exception)
@@ -3478,6 +3452,7 @@ void kvm_mmu_flush_tlb(struct kvm_vcpu *vcpu)
 	++vcpu->stat.tlb_flush;
 	kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu);
 }
+EXPORT_SYMBOL_GPL(kvm_mmu_flush_tlb);
 
 static void paging_new_cr3(struct kvm_vcpu *vcpu)
 {
@@ -3501,18 +3476,6 @@ static void paging_free(struct kvm_vcpu *vcpu)
 	nonpaging_free(vcpu);
 }
 
-static inline void protect_clean_gpte(unsigned *access, unsigned gpte)
-{
-	unsigned mask;
-
-	BUILD_BUG_ON(PT_WRITABLE_MASK != ACC_WRITE_MASK);
-
-	mask = (unsigned)~ACC_WRITE_MASK;
-	/* Allow write access to dirty gptes */
-	mask |= (gpte >> (PT_DIRTY_SHIFT - PT_WRITABLE_SHIFT)) & PT_WRITABLE_MASK;
-	*access &= mask;
-}
-
 static bool sync_mmio_spte(struct kvm *kvm, u64 *sptep, gfn_t gfn,
 			   unsigned access, int *nr_present)
 {
@@ -3530,16 +3493,6 @@ static bool sync_mmio_spte(struct kvm *kvm, u64 *sptep, gfn_t gfn,
 	return false;
 }
 
-static inline unsigned gpte_access(struct kvm_vcpu *vcpu, u64 gpte)
-{
-	unsigned access;
-
-	access = (gpte & (PT_WRITABLE_MASK | PT_USER_MASK)) | ACC_EXEC_MASK;
-	access &= ~(gpte >> PT64_NX_SHIFT);
-
-	return access;
-}
-
 static inline bool is_last_gpte(struct kvm_mmu *mmu, unsigned level, unsigned gpte)
 {
 	unsigned index;
@@ -3549,6 +3502,11 @@ static inline bool is_last_gpte(struct kvm_mmu *mmu, unsigned level, unsigned gp
 	return mmu->last_pte_bitmap & (1 << index);
 }
 
+#define PTTYPE_EPT 18 /* arbitrary */
+#define PTTYPE PTTYPE_EPT
+#include "paging_tmpl.h"
+#undef PTTYPE
+
 #define PTTYPE 64
 #include "paging_tmpl.h"
 #undef PTTYPE
@@ -3563,6 +3521,8 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu,
 	int maxphyaddr = cpuid_maxphyaddr(vcpu);
 	u64 exb_bit_rsvd = 0;
 
+	context->bad_mt_xwr = 0;
+
 	if (!context->nx)
 		exb_bit_rsvd = rsvd_bits(63, 63);
 	switch (context->root_level) {
@@ -3618,7 +3578,40 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu,
 	}
 }
 
-static void update_permission_bitmask(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu)
+static void reset_rsvds_bits_mask_ept(struct kvm_vcpu *vcpu,
+		struct kvm_mmu *context, bool execonly)
+{
+	int maxphyaddr = cpuid_maxphyaddr(vcpu);
+	int pte;
+
+	context->rsvd_bits_mask[0][3] =
+		rsvd_bits(maxphyaddr, 51) | rsvd_bits(3, 7);
+	context->rsvd_bits_mask[0][2] =
+		rsvd_bits(maxphyaddr, 51) | rsvd_bits(3, 6);
+	context->rsvd_bits_mask[0][1] =
+		rsvd_bits(maxphyaddr, 51) | rsvd_bits(3, 6);
+	context->rsvd_bits_mask[0][0] = rsvd_bits(maxphyaddr, 51);
+
+	/* large page */
+	context->rsvd_bits_mask[1][3] = context->rsvd_bits_mask[0][3];
+	context->rsvd_bits_mask[1][2] =
+		rsvd_bits(maxphyaddr, 51) | rsvd_bits(12, 29);
+	context->rsvd_bits_mask[1][1] =
+		rsvd_bits(maxphyaddr, 51) | rsvd_bits(12, 20);
+	context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[0][0];
+
+	for (pte = 0; pte < 64; pte++) {
+		int rwx_bits = pte & 7;
+		int mt = pte >> 3;
+		if (mt == 0x2 || mt == 0x3 || mt == 0x7 ||
+				rwx_bits == 0x2 || rwx_bits == 0x6 ||
+				(rwx_bits == 0x4 && !execonly))
+			context->bad_mt_xwr |= (1ull << pte);
+	}
+}
+
+static void update_permission_bitmask(struct kvm_vcpu *vcpu,
+		struct kvm_mmu *mmu, bool ept)
 {
 	unsigned bit, byte, pfec;
 	u8 map;
@@ -3636,12 +3629,16 @@ static void update_permission_bitmask(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu
 			w = bit & ACC_WRITE_MASK;
 			u = bit & ACC_USER_MASK;
 
-			/* Not really needed: !nx will cause pte.nx to fault */
-			x |= !mmu->nx;
-			/* Allow supervisor writes if !cr0.wp */
-			w |= !is_write_protection(vcpu) && !uf;
-			/* Disallow supervisor fetches of user code if cr4.smep */
-			x &= !(smep && u && !uf);
+			if (!ept) {
+				/* Not really needed: !nx will cause pte.nx to fault */
+				x |= !mmu->nx;
+				/* Allow supervisor writes if !cr0.wp */
+				w |= !is_write_protection(vcpu) && !uf;
+				/* Disallow supervisor fetches of user code if cr4.smep */
+				x &= !(smep && u && !uf);
+			} else
+				/* Not really needed: no U/S accesses on ept  */
+				u = 1;
 
 			fault = (ff && !x) || (uf && !u) || (wf && !w);
 			map |= fault << bit;
@@ -3676,7 +3673,7 @@ static int paging64_init_context_common(struct kvm_vcpu *vcpu,
 	context->root_level = level;
 
 	reset_rsvds_bits_mask(vcpu, context);
-	update_permission_bitmask(vcpu, context);
+	update_permission_bitmask(vcpu, context, false);
 	update_last_pte_bitmap(vcpu, context);
 
 	ASSERT(is_pae(vcpu));
@@ -3706,7 +3703,7 @@ static int paging32_init_context(struct kvm_vcpu *vcpu,
 	context->root_level = PT32_ROOT_LEVEL;
 
 	reset_rsvds_bits_mask(vcpu, context);
-	update_permission_bitmask(vcpu, context);
+	update_permission_bitmask(vcpu, context, false);
 	update_last_pte_bitmap(vcpu, context);
 
 	context->new_cr3 = paging_new_cr3;
@@ -3768,7 +3765,7 @@ static int init_kvm_tdp_mmu(struct kvm_vcpu *vcpu)
 		context->gva_to_gpa = paging32_gva_to_gpa;
 	}
 
-	update_permission_bitmask(vcpu, context);
+	update_permission_bitmask(vcpu, context, false);
 	update_last_pte_bitmap(vcpu, context);
 
 	return 0;
@@ -3800,6 +3797,33 @@ int kvm_init_shadow_mmu(struct kvm_vcpu *vcpu, struct kvm_mmu *context)
 }
 EXPORT_SYMBOL_GPL(kvm_init_shadow_mmu);
 
+int kvm_init_shadow_ept_mmu(struct kvm_vcpu *vcpu, struct kvm_mmu *context,
+		bool execonly)
+{
+	ASSERT(vcpu);
+	ASSERT(!VALID_PAGE(vcpu->arch.mmu.root_hpa));
+
+	context->shadow_root_level = kvm_x86_ops->get_tdp_level();
+
+	context->nx = true;
+	context->new_cr3 = paging_new_cr3;
+	context->page_fault = ept_page_fault;
+	context->gva_to_gpa = ept_gva_to_gpa;
+	context->sync_page = ept_sync_page;
+	context->invlpg = ept_invlpg;
+	context->update_pte = ept_update_pte;
+	context->free = paging_free;
+	context->root_level = context->shadow_root_level;
+	context->root_hpa = INVALID_PAGE;
+	context->direct_map = false;
+
+	update_permission_bitmask(vcpu, context, true);
+	reset_rsvds_bits_mask_ept(vcpu, context, execonly);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(kvm_init_shadow_ept_mmu);
+
 static int init_kvm_softmmu(struct kvm_vcpu *vcpu)
 {
 	int r = kvm_init_shadow_mmu(vcpu, vcpu->arch.walk_mmu);
@@ -3847,7 +3871,7 @@ static int init_kvm_nested_mmu(struct kvm_vcpu *vcpu)
 		g_context->gva_to_gpa = paging32_gva_to_gpa_nested;
 	}
 
-	update_permission_bitmask(vcpu, g_context);
+	update_permission_bitmask(vcpu, g_context, false);
 	update_last_pte_bitmap(vcpu, g_context);
 
 	return 0;
@@ -3923,8 +3947,8 @@ static bool need_remote_flush(u64 old, u64 new)
 		return true;
 	if ((old ^ new) & PT64_BASE_ADDR_MASK)
 		return true;
-	old ^= PT64_NX_MASK;
-	new ^= PT64_NX_MASK;
+	old ^= shadow_nx_mask;
+	new ^= shadow_nx_mask;
 	return (old & ~new & PT64_PERM_MASK) != 0;
 }
 
@@ -4182,7 +4206,7 @@ int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gva_t cr2, u32 error_code,
 	switch (er) {
 	case EMULATE_DONE:
 		return 1;
-	case EMULATE_DO_MMIO:
+	case EMULATE_USER_EXIT:
 		++vcpu->stat.mmio_exits;
 		/* fall through */
 	case EMULATE_FAIL:
@@ -4390,23 +4414,19 @@ void kvm_mmu_invalidate_mmio_sptes(struct kvm *kvm)
 	/*
 	 * The very rare case: if the generation-number is round,
 	 * zap all shadow pages.
-	 *
-	 * The max value is MMIO_MAX_GEN - 1 since it is not called
-	 * when mark memslot invalid.
 	 */
-	if (unlikely(kvm_current_mmio_generation(kvm) >= (MMIO_MAX_GEN - 1))) {
+	if (unlikely(kvm_current_mmio_generation(kvm) >= MMIO_MAX_GEN)) {
 		printk_ratelimited(KERN_INFO "kvm: zapping shadow pages for mmio generation wraparound\n");
 		kvm_mmu_invalidate_zap_all_pages(kvm);
 	}
 }
 
-static int mmu_shrink(struct shrinker *shrink, struct shrink_control *sc)
+static unsigned long
+mmu_shrink_scan(struct shrinker *shrink, struct shrink_control *sc)
 {
 	struct kvm *kvm;
 	int nr_to_scan = sc->nr_to_scan;
-
-	if (nr_to_scan == 0)
-		goto out;
+	unsigned long freed = 0;
 
 	raw_spin_lock(&kvm_lock);
 
@@ -4441,25 +4461,37 @@ static int mmu_shrink(struct shrinker *shrink, struct shrink_control *sc)
 			goto unlock;
 		}
 
-		prepare_zap_oldest_mmu_page(kvm, &invalid_list);
+		if (prepare_zap_oldest_mmu_page(kvm, &invalid_list))
+			freed++;
 		kvm_mmu_commit_zap_page(kvm, &invalid_list);
 
 unlock:
 		spin_unlock(&kvm->mmu_lock);
 		srcu_read_unlock(&kvm->srcu, idx);
 
+		/*
+		 * unfair on small ones
+		 * per-vm shrinkers cry out
+		 * sadness comes quickly
+		 */
 		list_move_tail(&kvm->vm_list, &vm_list);
 		break;
 	}
 
 	raw_spin_unlock(&kvm_lock);
+	return freed;
 
-out:
+}
+
+static unsigned long
+mmu_shrink_count(struct shrinker *shrink, struct shrink_control *sc)
+{
 	return percpu_counter_read_positive(&kvm_total_used_mmu_pages);
 }
 
 static struct shrinker mmu_shrinker = {
-	.shrink = mmu_shrink,
+	.count_objects = mmu_shrink_count,
+	.scan_objects = mmu_shrink_scan,
 	.seeks = DEFAULT_SEEKS * 10,
 };
 
diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h
index 5b59c57..77e044a 100644
--- a/arch/x86/kvm/mmu.h
+++ b/arch/x86/kvm/mmu.h
@@ -71,6 +71,8 @@ enum {
 
 int handle_mmio_page_fault_common(struct kvm_vcpu *vcpu, u64 addr, bool direct);
 int kvm_init_shadow_mmu(struct kvm_vcpu *vcpu, struct kvm_mmu *context);
+int kvm_init_shadow_ept_mmu(struct kvm_vcpu *vcpu, struct kvm_mmu *context,
+		bool execonly);
 
 static inline unsigned int kvm_mmu_available_pages(struct kvm *kvm)
 {
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 7769699..ad75d77 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -23,6 +23,13 @@
  * so the code in this file is compiled twice, once per pte size.
  */
 
+/*
+ * This is used to catch non optimized PT_GUEST_(DIRTY|ACCESS)_SHIFT macro
+ * uses for EPT without A/D paging type.
+ */
+extern u64 __pure __using_nonexistent_pte_bit(void)
+	       __compiletime_error("wrong use of PT_GUEST_(DIRTY|ACCESS)_SHIFT");
+
 #if PTTYPE == 64
 	#define pt_element_t u64
 	#define guest_walker guest_walker64
@@ -32,6 +39,10 @@
 	#define PT_LVL_OFFSET_MASK(lvl) PT64_LVL_OFFSET_MASK(lvl)
 	#define PT_INDEX(addr, level) PT64_INDEX(addr, level)
 	#define PT_LEVEL_BITS PT64_LEVEL_BITS
+	#define PT_GUEST_ACCESSED_MASK PT_ACCESSED_MASK
+	#define PT_GUEST_DIRTY_MASK PT_DIRTY_MASK
+	#define PT_GUEST_DIRTY_SHIFT PT_DIRTY_SHIFT
+	#define PT_GUEST_ACCESSED_SHIFT PT_ACCESSED_SHIFT
 	#ifdef CONFIG_X86_64
 	#define PT_MAX_FULL_LEVELS 4
 	#define CMPXCHG cmpxchg
@@ -49,7 +60,26 @@
 	#define PT_INDEX(addr, level) PT32_INDEX(addr, level)
 	#define PT_LEVEL_BITS PT32_LEVEL_BITS
 	#define PT_MAX_FULL_LEVELS 2
+	#define PT_GUEST_ACCESSED_MASK PT_ACCESSED_MASK
+	#define PT_GUEST_DIRTY_MASK PT_DIRTY_MASK
+	#define PT_GUEST_DIRTY_SHIFT PT_DIRTY_SHIFT
+	#define PT_GUEST_ACCESSED_SHIFT PT_ACCESSED_SHIFT
 	#define CMPXCHG cmpxchg
+#elif PTTYPE == PTTYPE_EPT
+	#define pt_element_t u64
+	#define guest_walker guest_walkerEPT
+	#define FNAME(name) ept_##name
+	#define PT_BASE_ADDR_MASK PT64_BASE_ADDR_MASK
+	#define PT_LVL_ADDR_MASK(lvl) PT64_LVL_ADDR_MASK(lvl)
+	#define PT_LVL_OFFSET_MASK(lvl) PT64_LVL_OFFSET_MASK(lvl)
+	#define PT_INDEX(addr, level) PT64_INDEX(addr, level)
+	#define PT_LEVEL_BITS PT64_LEVEL_BITS
+	#define PT_GUEST_ACCESSED_MASK 0
+	#define PT_GUEST_DIRTY_MASK 0
+	#define PT_GUEST_DIRTY_SHIFT __using_nonexistent_pte_bit()
+	#define PT_GUEST_ACCESSED_SHIFT __using_nonexistent_pte_bit()
+	#define CMPXCHG cmpxchg64
+	#define PT_MAX_FULL_LEVELS 4
 #else
 	#error Invalid PTTYPE value
 #endif
@@ -69,6 +99,7 @@ struct guest_walker {
 	pt_element_t prefetch_ptes[PTE_PREFETCH_NUM];
 	gpa_t pte_gpa[PT_MAX_FULL_LEVELS];
 	pt_element_t __user *ptep_user[PT_MAX_FULL_LEVELS];
+	bool pte_writable[PT_MAX_FULL_LEVELS];
 	unsigned pt_access;
 	unsigned pte_access;
 	gfn_t gfn;
@@ -80,6 +111,40 @@ static gfn_t gpte_to_gfn_lvl(pt_element_t gpte, int lvl)
 	return (gpte & PT_LVL_ADDR_MASK(lvl)) >> PAGE_SHIFT;
 }
 
+static inline void FNAME(protect_clean_gpte)(unsigned *access, unsigned gpte)
+{
+	unsigned mask;
+
+	/* dirty bit is not supported, so no need to track it */
+	if (!PT_GUEST_DIRTY_MASK)
+		return;
+
+	BUILD_BUG_ON(PT_WRITABLE_MASK != ACC_WRITE_MASK);
+
+	mask = (unsigned)~ACC_WRITE_MASK;
+	/* Allow write access to dirty gptes */
+	mask |= (gpte >> (PT_GUEST_DIRTY_SHIFT - PT_WRITABLE_SHIFT)) &
+		PT_WRITABLE_MASK;
+	*access &= mask;
+}
+
+static bool FNAME(is_rsvd_bits_set)(struct kvm_mmu *mmu, u64 gpte, int level)
+{
+	int bit7 = (gpte >> 7) & 1, low6 = gpte & 0x3f;
+
+	return (gpte & mmu->rsvd_bits_mask[bit7][level-1]) |
+		((mmu->bad_mt_xwr & (1ull << low6)) != 0);
+}
+
+static inline int FNAME(is_present_gpte)(unsigned long pte)
+{
+#if PTTYPE != PTTYPE_EPT
+	return is_present_gpte(pte);
+#else
+	return pte & 7;
+#endif
+}
+
 static int FNAME(cmpxchg_gpte)(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu,
 			       pt_element_t __user *ptep_user, unsigned index,
 			       pt_element_t orig_pte, pt_element_t new_pte)
@@ -103,6 +168,42 @@ static int FNAME(cmpxchg_gpte)(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu,
 	return (ret != orig_pte);
 }
 
+static bool FNAME(prefetch_invalid_gpte)(struct kvm_vcpu *vcpu,
+				  struct kvm_mmu_page *sp, u64 *spte,
+				  u64 gpte)
+{
+	if (FNAME(is_rsvd_bits_set)(&vcpu->arch.mmu, gpte, PT_PAGE_TABLE_LEVEL))
+		goto no_present;
+
+	if (!FNAME(is_present_gpte)(gpte))
+		goto no_present;
+
+	/* if accessed bit is not supported prefetch non accessed gpte */
+	if (PT_GUEST_ACCESSED_MASK && !(gpte & PT_GUEST_ACCESSED_MASK))
+		goto no_present;
+
+	return false;
+
+no_present:
+	drop_spte(vcpu->kvm, spte);
+	return true;
+}
+
+static inline unsigned FNAME(gpte_access)(struct kvm_vcpu *vcpu, u64 gpte)
+{
+	unsigned access;
+#if PTTYPE == PTTYPE_EPT
+	access = ((gpte & VMX_EPT_WRITABLE_MASK) ? ACC_WRITE_MASK : 0) |
+		((gpte & VMX_EPT_EXECUTABLE_MASK) ? ACC_EXEC_MASK : 0) |
+		ACC_USER_MASK;
+#else
+	access = (gpte & (PT_WRITABLE_MASK | PT_USER_MASK)) | ACC_EXEC_MASK;
+	access &= ~(gpte >> PT64_NX_SHIFT);
+#endif
+
+	return access;
+}
+
 static int FNAME(update_accessed_dirty_bits)(struct kvm_vcpu *vcpu,
 					     struct kvm_mmu *mmu,
 					     struct guest_walker *walker,
@@ -114,22 +215,43 @@ static int FNAME(update_accessed_dirty_bits)(struct kvm_vcpu *vcpu,
 	gfn_t table_gfn;
 	int ret;
 
+	/* dirty/accessed bits are not supported, so no need to update them */
+	if (!PT_GUEST_DIRTY_MASK)
+		return 0;
+
 	for (level = walker->max_level; level >= walker->level; --level) {
 		pte = orig_pte = walker->ptes[level - 1];
 		table_gfn = walker->table_gfn[level - 1];
 		ptep_user = walker->ptep_user[level - 1];
 		index = offset_in_page(ptep_user) / sizeof(pt_element_t);
-		if (!(pte & PT_ACCESSED_MASK)) {
+		if (!(pte & PT_GUEST_ACCESSED_MASK)) {
 			trace_kvm_mmu_set_accessed_bit(table_gfn, index, sizeof(pte));
-			pte |= PT_ACCESSED_MASK;
+			pte |= PT_GUEST_ACCESSED_MASK;
 		}
-		if (level == walker->level && write_fault && !is_dirty_gpte(pte)) {
+		if (level == walker->level && write_fault &&
+				!(pte & PT_GUEST_DIRTY_MASK)) {
 			trace_kvm_mmu_set_dirty_bit(table_gfn, index, sizeof(pte));
-			pte |= PT_DIRTY_MASK;
+			pte |= PT_GUEST_DIRTY_MASK;
 		}
 		if (pte == orig_pte)
 			continue;
 
+		/*
+		 * If the slot is read-only, simply do not process the accessed
+		 * and dirty bits.  This is the correct thing to do if the slot
+		 * is ROM, and page tables in read-as-ROM/write-as-MMIO slots
+		 * are only supported if the accessed and dirty bits are already
+		 * set in the ROM (so that MMIO writes are never needed).
+		 *
+		 * Note that NPT does not allow this at all and faults, since
+		 * it always wants nested page table entries for the guest
+		 * page tables to be writable.  And EPT works but will simply
+		 * overwrite the read-only memory to set the accessed and dirty
+		 * bits.
+		 */
+		if (unlikely(!walker->pte_writable[level - 1]))
+			continue;
+
 		ret = FNAME(cmpxchg_gpte)(vcpu, mmu, ptep_user, index, orig_pte, pte);
 		if (ret)
 			return ret;
@@ -170,7 +292,7 @@ retry_walk:
 	if (walker->level == PT32E_ROOT_LEVEL) {
 		pte = mmu->get_pdptr(vcpu, (addr >> 30) & 3);
 		trace_kvm_mmu_paging_element(pte, walker->level);
-		if (!is_present_gpte(pte))
+		if (!FNAME(is_present_gpte)(pte))
 			goto error;
 		--walker->level;
 	}
@@ -179,7 +301,7 @@ retry_walk:
 	ASSERT((!is_long_mode(vcpu) && is_pae(vcpu)) ||
 	       (mmu->get_cr3(vcpu) & CR3_NONPAE_RESERVED_BITS) == 0);
 
-	accessed_dirty = PT_ACCESSED_MASK;
+	accessed_dirty = PT_GUEST_ACCESSED_MASK;
 	pt_access = pte_access = ACC_ALL;
 	++walker->level;
 
@@ -204,7 +326,8 @@ retry_walk:
 			goto error;
 		real_gfn = gpa_to_gfn(real_gfn);
 
-		host_addr = gfn_to_hva(vcpu->kvm, real_gfn);
+		host_addr = gfn_to_hva_prot(vcpu->kvm, real_gfn,
+					    &walker->pte_writable[walker->level - 1]);
 		if (unlikely(kvm_is_error_hva(host_addr)))
 			goto error;
 
@@ -215,17 +338,17 @@ retry_walk:
 
 		trace_kvm_mmu_paging_element(pte, walker->level);
 
-		if (unlikely(!is_present_gpte(pte)))
+		if (unlikely(!FNAME(is_present_gpte)(pte)))
 			goto error;
 
-		if (unlikely(is_rsvd_bits_set(&vcpu->arch.mmu, pte,
-					      walker->level))) {
+		if (unlikely(FNAME(is_rsvd_bits_set)(mmu, pte,
+					             walker->level))) {
 			errcode |= PFERR_RSVD_MASK | PFERR_PRESENT_MASK;
 			goto error;
 		}
 
 		accessed_dirty &= pte;
-		pte_access = pt_access & gpte_access(vcpu, pte);
+		pte_access = pt_access & FNAME(gpte_access)(vcpu, pte);
 
 		walker->ptes[walker->level - 1] = pte;
 	} while (!is_last_gpte(mmu, walker->level, pte));
@@ -248,13 +371,15 @@ retry_walk:
 	walker->gfn = real_gpa >> PAGE_SHIFT;
 
 	if (!write_fault)
-		protect_clean_gpte(&pte_access, pte);
+		FNAME(protect_clean_gpte)(&pte_access, pte);
 	else
 		/*
-		 * On a write fault, fold the dirty bit into accessed_dirty by
-		 * shifting it one place right.
+		 * On a write fault, fold the dirty bit into accessed_dirty.
+		 * For modes without A/D bits support accessed_dirty will be
+		 * always clear.
 		 */
-		accessed_dirty &= pte >> (PT_DIRTY_SHIFT - PT_ACCESSED_SHIFT);
+		accessed_dirty &= pte >>
+			(PT_GUEST_DIRTY_SHIFT - PT_GUEST_ACCESSED_SHIFT);
 
 	if (unlikely(!accessed_dirty)) {
 		ret = FNAME(update_accessed_dirty_bits)(vcpu, mmu, walker, write_fault);
@@ -279,6 +404,25 @@ error:
 	walker->fault.vector = PF_VECTOR;
 	walker->fault.error_code_valid = true;
 	walker->fault.error_code = errcode;
+
+#if PTTYPE == PTTYPE_EPT
+	/*
+	 * Use PFERR_RSVD_MASK in error_code to to tell if EPT
+	 * misconfiguration requires to be injected. The detection is
+	 * done by is_rsvd_bits_set() above.
+	 *
+	 * We set up the value of exit_qualification to inject:
+	 * [2:0] - Derive from [2:0] of real exit_qualification at EPT violation
+	 * [5:3] - Calculated by the page walk of the guest EPT page tables
+	 * [7:8] - Derived from [7:8] of real exit_qualification
+	 *
+	 * The other bits are set to 0.
+	 */
+	if (!(errcode & PFERR_RSVD_MASK)) {
+		vcpu->arch.exit_qualification &= 0x187;
+		vcpu->arch.exit_qualification |= ((pt_access & pte) & 0x7) << 3;
+	}
+#endif
 	walker->fault.address = addr;
 	walker->fault.nested_page_fault = mmu != vcpu->arch.walk_mmu;
 
@@ -293,6 +437,7 @@ static int FNAME(walk_addr)(struct guest_walker *walker,
 					access);
 }
 
+#if PTTYPE != PTTYPE_EPT
 static int FNAME(walk_addr_nested)(struct guest_walker *walker,
 				   struct kvm_vcpu *vcpu, gva_t addr,
 				   u32 access)
@@ -300,6 +445,7 @@ static int FNAME(walk_addr_nested)(struct guest_walker *walker,
 	return FNAME(walk_addr_generic)(walker, vcpu, &vcpu->arch.nested_mmu,
 					addr, access);
 }
+#endif
 
 static bool
 FNAME(prefetch_gpte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp,
@@ -309,14 +455,14 @@ FNAME(prefetch_gpte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp,
 	gfn_t gfn;
 	pfn_t pfn;
 
-	if (prefetch_invalid_gpte(vcpu, sp, spte, gpte))
+	if (FNAME(prefetch_invalid_gpte)(vcpu, sp, spte, gpte))
 		return false;
 
 	pgprintk("%s: gpte %llx spte %p\n", __func__, (u64)gpte, spte);
 
 	gfn = gpte_to_gfn(gpte);
-	pte_access = sp->role.access & gpte_access(vcpu, gpte);
-	protect_clean_gpte(&pte_access, gpte);
+	pte_access = sp->role.access & FNAME(gpte_access)(vcpu, gpte);
+	FNAME(protect_clean_gpte)(&pte_access, gpte);
 	pfn = pte_prefetch_gfn_to_pfn(vcpu, gfn,
 			no_dirty_log && (pte_access & ACC_WRITE_MASK));
 	if (is_error_pfn(pfn))
@@ -446,7 +592,7 @@ static int FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 			goto out_gpte_changed;
 
 		if (sp)
-			link_shadow_page(it.sptep, sp);
+			link_shadow_page(it.sptep, sp, PT_GUEST_ACCESSED_MASK);
 	}
 
 	for (;
@@ -466,7 +612,7 @@ static int FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 
 		sp = kvm_mmu_get_page(vcpu, direct_gfn, addr, it.level-1,
 				      true, direct_access, it.sptep);
-		link_shadow_page(it.sptep, sp);
+		link_shadow_page(it.sptep, sp, PT_GUEST_ACCESSED_MASK);
 	}
 
 	clear_sp_write_flooding_count(it.sptep);
@@ -727,6 +873,7 @@ static gpa_t FNAME(gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t vaddr, u32 access,
 	return gpa;
 }
 
+#if PTTYPE != PTTYPE_EPT
 static gpa_t FNAME(gva_to_gpa_nested)(struct kvm_vcpu *vcpu, gva_t vaddr,
 				      u32 access,
 				      struct x86_exception *exception)
@@ -745,6 +892,7 @@ static gpa_t FNAME(gva_to_gpa_nested)(struct kvm_vcpu *vcpu, gva_t vaddr,
 
 	return gpa;
 }
+#endif
 
 /*
  * Using the cached information from sp->gfns is safe because:
@@ -785,15 +933,15 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 					  sizeof(pt_element_t)))
 			return -EINVAL;
 
-		if (prefetch_invalid_gpte(vcpu, sp, &sp->spt[i], gpte)) {
+		if (FNAME(prefetch_invalid_gpte)(vcpu, sp, &sp->spt[i], gpte)) {
 			vcpu->kvm->tlbs_dirty++;
 			continue;
 		}
 
 		gfn = gpte_to_gfn(gpte);
 		pte_access = sp->role.access;
-		pte_access &= gpte_access(vcpu, gpte);
-		protect_clean_gpte(&pte_access, gpte);
+		pte_access &= FNAME(gpte_access)(vcpu, gpte);
+		FNAME(protect_clean_gpte)(&pte_access, gpte);
 
 		if (sync_mmio_spte(vcpu->kvm, &sp->spt[i], gfn, pte_access,
 		      &nr_present))
@@ -830,3 +978,7 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 #undef gpte_to_gfn
 #undef gpte_to_gfn_lvl
 #undef CMPXCHG
+#undef PT_GUEST_ACCESSED_MASK
+#undef PT_GUEST_DIRTY_MASK
+#undef PT_GUEST_DIRTY_SHIFT
+#undef PT_GUEST_ACCESSED_SHIFT
diff --git a/arch/x86/kvm/pmu.c b/arch/x86/kvm/pmu.c
index c53e797..5c4f631 100644
--- a/arch/x86/kvm/pmu.c
+++ b/arch/x86/kvm/pmu.c
@@ -160,7 +160,7 @@ static void stop_counter(struct kvm_pmc *pmc)
 
 static void reprogram_counter(struct kvm_pmc *pmc, u32 type,
 		unsigned config, bool exclude_user, bool exclude_kernel,
-		bool intr)
+		bool intr, bool in_tx, bool in_tx_cp)
 {
 	struct perf_event *event;
 	struct perf_event_attr attr = {
@@ -173,6 +173,10 @@ static void reprogram_counter(struct kvm_pmc *pmc, u32 type,
 		.exclude_kernel = exclude_kernel,
 		.config = config,
 	};
+	if (in_tx)
+		attr.config |= HSW_IN_TX;
+	if (in_tx_cp)
+		attr.config |= HSW_IN_TX_CHECKPOINTED;
 
 	attr.sample_period = (-pmc->counter) & pmc_bitmask(pmc);
 
@@ -226,7 +230,9 @@ static void reprogram_gp_counter(struct kvm_pmc *pmc, u64 eventsel)
 
 	if (!(eventsel & (ARCH_PERFMON_EVENTSEL_EDGE |
 				ARCH_PERFMON_EVENTSEL_INV |
-				ARCH_PERFMON_EVENTSEL_CMASK))) {
+				ARCH_PERFMON_EVENTSEL_CMASK |
+				HSW_IN_TX |
+				HSW_IN_TX_CHECKPOINTED))) {
 		config = find_arch_event(&pmc->vcpu->arch.pmu, event_select,
 				unit_mask);
 		if (config != PERF_COUNT_HW_MAX)
@@ -239,7 +245,9 @@ static void reprogram_gp_counter(struct kvm_pmc *pmc, u64 eventsel)
 	reprogram_counter(pmc, type, config,
 			!(eventsel & ARCH_PERFMON_EVENTSEL_USR),
 			!(eventsel & ARCH_PERFMON_EVENTSEL_OS),
-			eventsel & ARCH_PERFMON_EVENTSEL_INT);
+			eventsel & ARCH_PERFMON_EVENTSEL_INT,
+			(eventsel & HSW_IN_TX),
+			(eventsel & HSW_IN_TX_CHECKPOINTED));
 }
 
 static void reprogram_fixed_counter(struct kvm_pmc *pmc, u8 en_pmi, int idx)
@@ -256,7 +264,7 @@ static void reprogram_fixed_counter(struct kvm_pmc *pmc, u8 en_pmi, int idx)
 			arch_events[fixed_pmc_events[idx]].event_type,
 			!(en & 0x2), /* exclude user */
 			!(en & 0x1), /* exclude kernel */
-			pmi);
+			pmi, false, false);
 }
 
 static inline u8 fixed_en_pmi(u64 ctrl, int idx)
@@ -408,7 +416,7 @@ int kvm_pmu_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		} else if ((pmc = get_gp_pmc(pmu, index, MSR_P6_EVNTSEL0))) {
 			if (data == pmc->eventsel)
 				return 0;
-			if (!(data & 0xffffffff00200000ull)) {
+			if (!(data & pmu->reserved_bits)) {
 				reprogram_gp_counter(pmc, data);
 				return 0;
 			}
@@ -450,6 +458,7 @@ void kvm_pmu_cpuid_update(struct kvm_vcpu *vcpu)
 	pmu->counter_bitmask[KVM_PMC_GP] = 0;
 	pmu->counter_bitmask[KVM_PMC_FIXED] = 0;
 	pmu->version = 0;
+	pmu->reserved_bits = 0xffffffff00200000ull;
 
 	entry = kvm_find_cpuid_entry(vcpu, 0xa, 0);
 	if (!entry)
@@ -478,6 +487,12 @@ void kvm_pmu_cpuid_update(struct kvm_vcpu *vcpu)
 	pmu->global_ctrl = ((1 << pmu->nr_arch_gp_counters) - 1) |
 		(((1ull << pmu->nr_arch_fixed_counters) - 1) << INTEL_PMC_IDX_FIXED);
 	pmu->global_ctrl_mask = ~pmu->global_ctrl;
+
+	entry = kvm_find_cpuid_entry(vcpu, 7, 0);
+	if (entry &&
+	    (boot_cpu_has(X86_FEATURE_HLE) || boot_cpu_has(X86_FEATURE_RTM)) &&
+	    (entry->ebx & (X86_FEATURE_HLE|X86_FEATURE_RTM)))
+		pmu->reserved_bits ^= HSW_IN_TX|HSW_IN_TX_CHECKPOINTED;
 }
 
 void kvm_pmu_init(struct kvm_vcpu *vcpu)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 064d0be..2b2fce1 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -373,6 +373,7 @@ struct nested_vmx {
 	 * we must keep them pinned while L2 runs.
 	 */
 	struct page *apic_access_page;
+	u64 msr_ia32_feature_control;
 };
 
 #define POSTED_INTR_ON  0
@@ -711,10 +712,10 @@ static void nested_release_page_clean(struct page *page)
 	kvm_release_page_clean(page);
 }
 
+static unsigned long nested_ept_get_cr3(struct kvm_vcpu *vcpu);
 static u64 construct_eptp(unsigned long root_hpa);
 static void kvm_cpu_vmxon(u64 addr);
 static void kvm_cpu_vmxoff(void);
-static void vmx_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3);
 static int vmx_set_tss_addr(struct kvm *kvm, unsigned int addr);
 static void vmx_set_segment(struct kvm_vcpu *vcpu,
 			    struct kvm_segment *var, int seg);
@@ -1039,12 +1040,16 @@ static inline bool nested_cpu_has2(struct vmcs12 *vmcs12, u32 bit)
 		(vmcs12->secondary_vm_exec_control & bit);
 }
 
-static inline bool nested_cpu_has_virtual_nmis(struct vmcs12 *vmcs12,
-	struct kvm_vcpu *vcpu)
+static inline bool nested_cpu_has_virtual_nmis(struct vmcs12 *vmcs12)
 {
 	return vmcs12->pin_based_vm_exec_control & PIN_BASED_VIRTUAL_NMIS;
 }
 
+static inline int nested_cpu_has_ept(struct vmcs12 *vmcs12)
+{
+	return nested_cpu_has2(vmcs12, SECONDARY_EXEC_ENABLE_EPT);
+}
+
 static inline bool is_exception(u32 intr_info)
 {
 	return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VALID_MASK))
@@ -2155,6 +2160,7 @@ static u32 nested_vmx_pinbased_ctls_low, nested_vmx_pinbased_ctls_high;
 static u32 nested_vmx_exit_ctls_low, nested_vmx_exit_ctls_high;
 static u32 nested_vmx_entry_ctls_low, nested_vmx_entry_ctls_high;
 static u32 nested_vmx_misc_low, nested_vmx_misc_high;
+static u32 nested_vmx_ept_caps;
 static __init void nested_vmx_setup_ctls_msrs(void)
 {
 	/*
@@ -2190,14 +2196,17 @@ static __init void nested_vmx_setup_ctls_msrs(void)
 	 * If bit 55 of VMX_BASIC is off, bits 0-8 and 10, 11, 13, 14, 16 and
 	 * 17 must be 1.
 	 */
+	rdmsr(MSR_IA32_VMX_EXIT_CTLS,
+		nested_vmx_exit_ctls_low, nested_vmx_exit_ctls_high);
 	nested_vmx_exit_ctls_low = VM_EXIT_ALWAYSON_WITHOUT_TRUE_MSR;
 	/* Note that guest use of VM_EXIT_ACK_INTR_ON_EXIT is not supported. */
+	nested_vmx_exit_ctls_high &=
 #ifdef CONFIG_X86_64
-	nested_vmx_exit_ctls_high = VM_EXIT_HOST_ADDR_SPACE_SIZE;
-#else
-	nested_vmx_exit_ctls_high = 0;
+		VM_EXIT_HOST_ADDR_SPACE_SIZE |
 #endif
-	nested_vmx_exit_ctls_high |= VM_EXIT_ALWAYSON_WITHOUT_TRUE_MSR;
+		VM_EXIT_LOAD_IA32_PAT | VM_EXIT_SAVE_IA32_PAT;
+	nested_vmx_exit_ctls_high |= (VM_EXIT_ALWAYSON_WITHOUT_TRUE_MSR |
+				      VM_EXIT_LOAD_IA32_EFER);
 
 	/* entry controls */
 	rdmsr(MSR_IA32_VMX_ENTRY_CTLS,
@@ -2205,8 +2214,12 @@ static __init void nested_vmx_setup_ctls_msrs(void)
 	/* If bit 55 of VMX_BASIC is off, bits 0-8 and 12 must be 1. */
 	nested_vmx_entry_ctls_low = VM_ENTRY_ALWAYSON_WITHOUT_TRUE_MSR;
 	nested_vmx_entry_ctls_high &=
-		VM_ENTRY_LOAD_IA32_PAT | VM_ENTRY_IA32E_MODE;
-	nested_vmx_entry_ctls_high |= VM_ENTRY_ALWAYSON_WITHOUT_TRUE_MSR;
+#ifdef CONFIG_X86_64
+		VM_ENTRY_IA32E_MODE |
+#endif
+		VM_ENTRY_LOAD_IA32_PAT;
+	nested_vmx_entry_ctls_high |= (VM_ENTRY_ALWAYSON_WITHOUT_TRUE_MSR |
+				       VM_ENTRY_LOAD_IA32_EFER);
 
 	/* cpu-based controls */
 	rdmsr(MSR_IA32_VMX_PROCBASED_CTLS,
@@ -2241,6 +2254,22 @@ static __init void nested_vmx_setup_ctls_msrs(void)
 		SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES |
 		SECONDARY_EXEC_WBINVD_EXITING;
 
+	if (enable_ept) {
+		/* nested EPT: emulate EPT also to L1 */
+		nested_vmx_secondary_ctls_high |= SECONDARY_EXEC_ENABLE_EPT;
+		nested_vmx_ept_caps = VMX_EPT_PAGE_WALK_4_BIT |
+			 VMX_EPTP_WB_BIT | VMX_EPT_INVEPT_BIT;
+		nested_vmx_ept_caps &= vmx_capability.ept;
+		/*
+		 * Since invept is completely emulated we support both global
+		 * and context invalidation independent of what host cpu
+		 * supports
+		 */
+		nested_vmx_ept_caps |= VMX_EPT_EXTENT_GLOBAL_BIT |
+			VMX_EPT_EXTENT_CONTEXT_BIT;
+	} else
+		nested_vmx_ept_caps = 0;
+
 	/* miscellaneous data */
 	rdmsr(MSR_IA32_VMX_MISC, nested_vmx_misc_low, nested_vmx_misc_high);
 	nested_vmx_misc_low &= VMX_MISC_PREEMPTION_TIMER_RATE_MASK |
@@ -2282,8 +2311,11 @@ static int vmx_get_vmx_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata)
 
 	switch (msr_index) {
 	case MSR_IA32_FEATURE_CONTROL:
-		*pdata = 0;
-		break;
+		if (nested_vmx_allowed(vcpu)) {
+			*pdata = to_vmx(vcpu)->nested.msr_ia32_feature_control;
+			break;
+		}
+		return 0;
 	case MSR_IA32_VMX_BASIC:
 		/*
 		 * This MSR reports some information about VMX support. We
@@ -2346,8 +2378,8 @@ static int vmx_get_vmx_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata)
 					nested_vmx_secondary_ctls_high);
 		break;
 	case MSR_IA32_VMX_EPT_VPID_CAP:
-		/* Currently, no nested ept or nested vpid */
-		*pdata = 0;
+		/* Currently, no nested vpid support */
+		*pdata = nested_vmx_ept_caps;
 		break;
 	default:
 		return 0;
@@ -2356,14 +2388,24 @@ static int vmx_get_vmx_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata)
 	return 1;
 }
 
-static int vmx_set_vmx_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data)
+static int vmx_set_vmx_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 {
+	u32 msr_index = msr_info->index;
+	u64 data = msr_info->data;
+	bool host_initialized = msr_info->host_initiated;
+
 	if (!nested_vmx_allowed(vcpu))
 		return 0;
 
-	if (msr_index == MSR_IA32_FEATURE_CONTROL)
-		/* TODO: the right thing. */
+	if (msr_index == MSR_IA32_FEATURE_CONTROL) {
+		if (!host_initialized &&
+				to_vmx(vcpu)->nested.msr_ia32_feature_control
+				& FEATURE_CONTROL_LOCKED)
+			return 0;
+		to_vmx(vcpu)->nested.msr_ia32_feature_control = data;
 		return 1;
+	}
+
 	/*
 	 * No need to treat VMX capability MSRs specially: If we don't handle
 	 * them, handle_wrmsr will #GP(0), which is correct (they are readonly)
@@ -2494,7 +2536,7 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 			return 1;
 		/* Otherwise falls through */
 	default:
-		if (vmx_set_vmx_msr(vcpu, msr_index, data))
+		if (vmx_set_vmx_msr(vcpu, msr_info))
 			break;
 		msr = find_msr_entry(vmx, msr_index);
 		if (msr) {
@@ -3213,25 +3255,29 @@ static void vmx_decache_cr4_guest_bits(struct kvm_vcpu *vcpu)
 
 static void ept_load_pdptrs(struct kvm_vcpu *vcpu)
 {
+	struct kvm_mmu *mmu = vcpu->arch.walk_mmu;
+
 	if (!test_bit(VCPU_EXREG_PDPTR,
 		      (unsigned long *)&vcpu->arch.regs_dirty))
 		return;
 
 	if (is_paging(vcpu) && is_pae(vcpu) && !is_long_mode(vcpu)) {
-		vmcs_write64(GUEST_PDPTR0, vcpu->arch.mmu.pdptrs[0]);
-		vmcs_write64(GUEST_PDPTR1, vcpu->arch.mmu.pdptrs[1]);
-		vmcs_write64(GUEST_PDPTR2, vcpu->arch.mmu.pdptrs[2]);
-		vmcs_write64(GUEST_PDPTR3, vcpu->arch.mmu.pdptrs[3]);
+		vmcs_write64(GUEST_PDPTR0, mmu->pdptrs[0]);
+		vmcs_write64(GUEST_PDPTR1, mmu->pdptrs[1]);
+		vmcs_write64(GUEST_PDPTR2, mmu->pdptrs[2]);
+		vmcs_write64(GUEST_PDPTR3, mmu->pdptrs[3]);
 	}
 }
 
 static void ept_save_pdptrs(struct kvm_vcpu *vcpu)
 {
+	struct kvm_mmu *mmu = vcpu->arch.walk_mmu;
+
 	if (is_paging(vcpu) && is_pae(vcpu) && !is_long_mode(vcpu)) {
-		vcpu->arch.mmu.pdptrs[0] = vmcs_read64(GUEST_PDPTR0);
-		vcpu->arch.mmu.pdptrs[1] = vmcs_read64(GUEST_PDPTR1);
-		vcpu->arch.mmu.pdptrs[2] = vmcs_read64(GUEST_PDPTR2);
-		vcpu->arch.mmu.pdptrs[3] = vmcs_read64(GUEST_PDPTR3);
+		mmu->pdptrs[0] = vmcs_read64(GUEST_PDPTR0);
+		mmu->pdptrs[1] = vmcs_read64(GUEST_PDPTR1);
+		mmu->pdptrs[2] = vmcs_read64(GUEST_PDPTR2);
+		mmu->pdptrs[3] = vmcs_read64(GUEST_PDPTR3);
 	}
 
 	__set_bit(VCPU_EXREG_PDPTR,
@@ -5297,14 +5343,29 @@ static int handle_ept_violation(struct kvm_vcpu *vcpu)
 		return 0;
 	}
 
+	/*
+	 * EPT violation happened while executing iret from NMI,
+	 * "blocked by NMI" bit has to be set before next VM entry.
+	 * There are errata that may cause this bit to not be set:
+	 * AAK134, BY25.
+	 */
+	if (!(to_vmx(vcpu)->idt_vectoring_info & VECTORING_INFO_VALID_MASK) &&
+			cpu_has_virtual_nmis() &&
+			(exit_qualification & INTR_INFO_UNBLOCK_NMI))
+		vmcs_set_bits(GUEST_INTERRUPTIBILITY_INFO, GUEST_INTR_STATE_NMI);
+
 	gpa = vmcs_read64(GUEST_PHYSICAL_ADDRESS);
 	trace_kvm_page_fault(gpa, exit_qualification);
 
 	/* It is a write fault? */
 	error_code = exit_qualification & (1U << 1);
+	/* It is a fetch fault? */
+	error_code |= (exit_qualification & (1U << 2)) << 2;
 	/* ept page table is present? */
 	error_code |= (exit_qualification >> 3) & 0x1;
 
+	vcpu->arch.exit_qualification = exit_qualification;
+
 	return kvm_mmu_page_fault(vcpu, gpa, error_code, NULL, 0);
 }
 
@@ -5438,7 +5499,8 @@ static int handle_invalid_guest_state(struct kvm_vcpu *vcpu)
 
 		err = emulate_instruction(vcpu, EMULTYPE_NO_REEXECUTE);
 
-		if (err == EMULATE_DO_MMIO) {
+		if (err == EMULATE_USER_EXIT) {
+			++vcpu->stat.mmio_exits;
 			ret = 0;
 			goto out;
 		}
@@ -5567,8 +5629,47 @@ static void nested_free_all_saved_vmcss(struct vcpu_vmx *vmx)
 		free_loaded_vmcs(&vmx->vmcs01);
 }
 
+/*
+ * The following 3 functions, nested_vmx_succeed()/failValid()/failInvalid(),
+ * set the success or error code of an emulated VMX instruction, as specified
+ * by Vol 2B, VMX Instruction Reference, "Conventions".
+ */
+static void nested_vmx_succeed(struct kvm_vcpu *vcpu)
+{
+	vmx_set_rflags(vcpu, vmx_get_rflags(vcpu)
+			& ~(X86_EFLAGS_CF | X86_EFLAGS_PF | X86_EFLAGS_AF |
+			    X86_EFLAGS_ZF | X86_EFLAGS_SF | X86_EFLAGS_OF));
+}
+
+static void nested_vmx_failInvalid(struct kvm_vcpu *vcpu)
+{
+	vmx_set_rflags(vcpu, (vmx_get_rflags(vcpu)
+			& ~(X86_EFLAGS_PF | X86_EFLAGS_AF | X86_EFLAGS_ZF |
+			    X86_EFLAGS_SF | X86_EFLAGS_OF))
+			| X86_EFLAGS_CF);
+}
+
 static void nested_vmx_failValid(struct kvm_vcpu *vcpu,
-				 u32 vm_instruction_error);
+					u32 vm_instruction_error)
+{
+	if (to_vmx(vcpu)->nested.current_vmptr == -1ull) {
+		/*
+		 * failValid writes the error number to the current VMCS, which
+		 * can't be done there isn't a current VMCS.
+		 */
+		nested_vmx_failInvalid(vcpu);
+		return;
+	}
+	vmx_set_rflags(vcpu, (vmx_get_rflags(vcpu)
+			& ~(X86_EFLAGS_CF | X86_EFLAGS_PF | X86_EFLAGS_AF |
+			    X86_EFLAGS_SF | X86_EFLAGS_OF))
+			| X86_EFLAGS_ZF);
+	get_vmcs12(vcpu)->vm_instruction_error = vm_instruction_error;
+	/*
+	 * We don't need to force a shadow sync because
+	 * VM_INSTRUCTION_ERROR is not shadowed
+	 */
+}
 
 /*
  * Emulate the VMXON instruction.
@@ -5583,6 +5684,8 @@ static int handle_vmon(struct kvm_vcpu *vcpu)
 	struct kvm_segment cs;
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	struct vmcs *shadow_vmcs;
+	const u64 VMXON_NEEDED_FEATURES = FEATURE_CONTROL_LOCKED
+		| FEATURE_CONTROL_VMXON_ENABLED_OUTSIDE_SMX;
 
 	/* The Intel VMX Instruction Reference lists a bunch of bits that
 	 * are prerequisite to running VMXON, most notably cr4.VMXE must be
@@ -5611,6 +5714,13 @@ static int handle_vmon(struct kvm_vcpu *vcpu)
 		skip_emulated_instruction(vcpu);
 		return 1;
 	}
+
+	if ((vmx->nested.msr_ia32_feature_control & VMXON_NEEDED_FEATURES)
+			!= VMXON_NEEDED_FEATURES) {
+		kvm_inject_gp(vcpu, 0);
+		return 1;
+	}
+
 	if (enable_shadow_vmcs) {
 		shadow_vmcs = alloc_vmcs();
 		if (!shadow_vmcs)
@@ -5628,6 +5738,7 @@ static int handle_vmon(struct kvm_vcpu *vcpu)
 	vmx->nested.vmxon = true;
 
 	skip_emulated_instruction(vcpu);
+	nested_vmx_succeed(vcpu);
 	return 1;
 }
 
@@ -5712,6 +5823,7 @@ static int handle_vmoff(struct kvm_vcpu *vcpu)
 		return 1;
 	free_nested(to_vmx(vcpu));
 	skip_emulated_instruction(vcpu);
+	nested_vmx_succeed(vcpu);
 	return 1;
 }
 
@@ -5768,48 +5880,6 @@ static int get_vmx_mem_address(struct kvm_vcpu *vcpu,
 	return 0;
 }
 
-/*
- * The following 3 functions, nested_vmx_succeed()/failValid()/failInvalid(),
- * set the success or error code of an emulated VMX instruction, as specified
- * by Vol 2B, VMX Instruction Reference, "Conventions".
- */
-static void nested_vmx_succeed(struct kvm_vcpu *vcpu)
-{
-	vmx_set_rflags(vcpu, vmx_get_rflags(vcpu)
-			& ~(X86_EFLAGS_CF | X86_EFLAGS_PF | X86_EFLAGS_AF |
-			    X86_EFLAGS_ZF | X86_EFLAGS_SF | X86_EFLAGS_OF));
-}
-
-static void nested_vmx_failInvalid(struct kvm_vcpu *vcpu)
-{
-	vmx_set_rflags(vcpu, (vmx_get_rflags(vcpu)
-			& ~(X86_EFLAGS_PF | X86_EFLAGS_AF | X86_EFLAGS_ZF |
-			    X86_EFLAGS_SF | X86_EFLAGS_OF))
-			| X86_EFLAGS_CF);
-}
-
-static void nested_vmx_failValid(struct kvm_vcpu *vcpu,
-					u32 vm_instruction_error)
-{
-	if (to_vmx(vcpu)->nested.current_vmptr == -1ull) {
-		/*
-		 * failValid writes the error number to the current VMCS, which
-		 * can't be done there isn't a current VMCS.
-		 */
-		nested_vmx_failInvalid(vcpu);
-		return;
-	}
-	vmx_set_rflags(vcpu, (vmx_get_rflags(vcpu)
-			& ~(X86_EFLAGS_CF | X86_EFLAGS_PF | X86_EFLAGS_AF |
-			    X86_EFLAGS_SF | X86_EFLAGS_OF))
-			| X86_EFLAGS_ZF);
-	get_vmcs12(vcpu)->vm_instruction_error = vm_instruction_error;
-	/*
-	 * We don't need to force a shadow sync because
-	 * VM_INSTRUCTION_ERROR is not shadowed
-	 */
-}
-
 /* Emulate the VMCLEAR instruction */
 static int handle_vmclear(struct kvm_vcpu *vcpu)
 {
@@ -5972,8 +6042,8 @@ static void copy_shadow_to_vmcs12(struct vcpu_vmx *vmx)
 	unsigned long field;
 	u64 field_value;
 	struct vmcs *shadow_vmcs = vmx->nested.current_shadow_vmcs;
-	unsigned long *fields = (unsigned long *)shadow_read_write_fields;
-	int num_fields = max_shadow_read_write_fields;
+	const unsigned long *fields = shadow_read_write_fields;
+	const int num_fields = max_shadow_read_write_fields;
 
 	vmcs_load(shadow_vmcs);
 
@@ -6002,12 +6072,11 @@ static void copy_shadow_to_vmcs12(struct vcpu_vmx *vmx)
 
 static void copy_vmcs12_to_shadow(struct vcpu_vmx *vmx)
 {
-	unsigned long *fields[] = {
-		(unsigned long *)shadow_read_write_fields,
-		(unsigned long *)shadow_read_only_fields
+	const unsigned long *fields[] = {
+		shadow_read_write_fields,
+		shadow_read_only_fields
 	};
-	int num_lists =  ARRAY_SIZE(fields);
-	int max_fields[] = {
+	const int max_fields[] = {
 		max_shadow_read_write_fields,
 		max_shadow_read_only_fields
 	};
@@ -6018,7 +6087,7 @@ static void copy_vmcs12_to_shadow(struct vcpu_vmx *vmx)
 
 	vmcs_load(shadow_vmcs);
 
-	for (q = 0; q < num_lists; q++) {
+	for (q = 0; q < ARRAY_SIZE(fields); q++) {
 		for (i = 0; i < max_fields[q]; i++) {
 			field = fields[q][i];
 			vmcs12_read_any(&vmx->vcpu, field, &field_value);
@@ -6248,6 +6317,74 @@ static int handle_vmptrst(struct kvm_vcpu *vcpu)
 	return 1;
 }
 
+/* Emulate the INVEPT instruction */
+static int handle_invept(struct kvm_vcpu *vcpu)
+{
+	u32 vmx_instruction_info, types;
+	unsigned long type;
+	gva_t gva;
+	struct x86_exception e;
+	struct {
+		u64 eptp, gpa;
+	} operand;
+	u64 eptp_mask = ((1ull << 51) - 1) & PAGE_MASK;
+
+	if (!(nested_vmx_secondary_ctls_high & SECONDARY_EXEC_ENABLE_EPT) ||
+	    !(nested_vmx_ept_caps & VMX_EPT_INVEPT_BIT)) {
+		kvm_queue_exception(vcpu, UD_VECTOR);
+		return 1;
+	}
+
+	if (!nested_vmx_check_permission(vcpu))
+		return 1;
+
+	if (!kvm_read_cr0_bits(vcpu, X86_CR0_PE)) {
+		kvm_queue_exception(vcpu, UD_VECTOR);
+		return 1;
+	}
+
+	vmx_instruction_info = vmcs_read32(VMX_INSTRUCTION_INFO);
+	type = kvm_register_read(vcpu, (vmx_instruction_info >> 28) & 0xf);
+
+	types = (nested_vmx_ept_caps >> VMX_EPT_EXTENT_SHIFT) & 6;
+
+	if (!(types & (1UL << type))) {
+		nested_vmx_failValid(vcpu,
+				VMXERR_INVALID_OPERAND_TO_INVEPT_INVVPID);
+		return 1;
+	}
+
+	/* According to the Intel VMX instruction reference, the memory
+	 * operand is read even if it isn't needed (e.g., for type==global)
+	 */
+	if (get_vmx_mem_address(vcpu, vmcs_readl(EXIT_QUALIFICATION),
+			vmx_instruction_info, &gva))
+		return 1;
+	if (kvm_read_guest_virt(&vcpu->arch.emulate_ctxt, gva, &operand,
+				sizeof(operand), &e)) {
+		kvm_inject_page_fault(vcpu, &e);
+		return 1;
+	}
+
+	switch (type) {
+	case VMX_EPT_EXTENT_CONTEXT:
+		if ((operand.eptp & eptp_mask) !=
+				(nested_ept_get_cr3(vcpu) & eptp_mask))
+			break;
+	case VMX_EPT_EXTENT_GLOBAL:
+		kvm_mmu_sync_roots(vcpu);
+		kvm_mmu_flush_tlb(vcpu);
+		nested_vmx_succeed(vcpu);
+		break;
+	default:
+		BUG_ON(1);
+		break;
+	}
+
+	skip_emulated_instruction(vcpu);
+	return 1;
+}
+
 /*
  * The exit handlers return 1 if the exit was handled fully and guest execution
  * may resume.  Otherwise they set the kvm_run parameter to indicate what needs
@@ -6292,6 +6429,7 @@ static int (*const kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu) = {
 	[EXIT_REASON_PAUSE_INSTRUCTION]       = handle_pause,
 	[EXIT_REASON_MWAIT_INSTRUCTION]	      = handle_invalid_op,
 	[EXIT_REASON_MONITOR_INSTRUCTION]     = handle_invalid_op,
+	[EXIT_REASON_INVEPT]                  = handle_invept,
 };
 
 static const int kvm_vmx_max_exit_handlers =
@@ -6518,6 +6656,7 @@ static bool nested_vmx_exit_handled(struct kvm_vcpu *vcpu)
 	case EXIT_REASON_VMPTRST: case EXIT_REASON_VMREAD:
 	case EXIT_REASON_VMRESUME: case EXIT_REASON_VMWRITE:
 	case EXIT_REASON_VMOFF: case EXIT_REASON_VMON:
+	case EXIT_REASON_INVEPT:
 		/*
 		 * VMX instructions trap unconditionally. This allows L1 to
 		 * emulate them for its L2 guest, i.e., allows 3-level nesting!
@@ -6550,7 +6689,20 @@ static bool nested_vmx_exit_handled(struct kvm_vcpu *vcpu)
 		return nested_cpu_has2(vmcs12,
 			SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES);
 	case EXIT_REASON_EPT_VIOLATION:
+		/*
+		 * L0 always deals with the EPT violation. If nested EPT is
+		 * used, and the nested mmu code discovers that the address is
+		 * missing in the guest EPT table (EPT12), the EPT violation
+		 * will be injected with nested_ept_inject_page_fault()
+		 */
+		return 0;
 	case EXIT_REASON_EPT_MISCONFIG:
+		/*
+		 * L2 never uses directly L1's EPT, but rather L0's own EPT
+		 * table (shadow on EPT) or a merged EPT table that L0 built
+		 * (EPT on EPT). So any problems with the structure of the
+		 * table is L0's fault.
+		 */
 		return 0;
 	case EXIT_REASON_PREEMPTION_TIMER:
 		return vmcs12->pin_based_vm_exec_control &
@@ -6638,7 +6790,7 @@ static int vmx_handle_exit(struct kvm_vcpu *vcpu)
 
 	if (unlikely(!cpu_has_virtual_nmis() && vmx->soft_vnmi_blocked &&
 	    !(is_guest_mode(vcpu) && nested_cpu_has_virtual_nmis(
-	                                get_vmcs12(vcpu), vcpu)))) {
+					get_vmcs12(vcpu))))) {
 		if (vmx_interrupt_allowed(vcpu)) {
 			vmx->soft_vnmi_blocked = 0;
 		} else if (vmx->vnmi_blocked_time > 1000000000LL &&
@@ -7326,6 +7478,48 @@ static void vmx_set_supported_cpuid(u32 func, struct kvm_cpuid_entry2 *entry)
 		entry->ecx |= bit(X86_FEATURE_VMX);
 }
 
+static void nested_ept_inject_page_fault(struct kvm_vcpu *vcpu,
+		struct x86_exception *fault)
+{
+	struct vmcs12 *vmcs12;
+	nested_vmx_vmexit(vcpu);
+	vmcs12 = get_vmcs12(vcpu);
+
+	if (fault->error_code & PFERR_RSVD_MASK)
+		vmcs12->vm_exit_reason = EXIT_REASON_EPT_MISCONFIG;
+	else
+		vmcs12->vm_exit_reason = EXIT_REASON_EPT_VIOLATION;
+	vmcs12->exit_qualification = vcpu->arch.exit_qualification;
+	vmcs12->guest_physical_address = fault->address;
+}
+
+/* Callbacks for nested_ept_init_mmu_context: */
+
+static unsigned long nested_ept_get_cr3(struct kvm_vcpu *vcpu)
+{
+	/* return the page table to be shadowed - in our case, EPT12 */
+	return get_vmcs12(vcpu)->ept_pointer;
+}
+
+static int nested_ept_init_mmu_context(struct kvm_vcpu *vcpu)
+{
+	int r = kvm_init_shadow_ept_mmu(vcpu, &vcpu->arch.mmu,
+			nested_vmx_ept_caps & VMX_EPT_EXECUTE_ONLY_BIT);
+
+	vcpu->arch.mmu.set_cr3           = vmx_set_cr3;
+	vcpu->arch.mmu.get_cr3           = nested_ept_get_cr3;
+	vcpu->arch.mmu.inject_page_fault = nested_ept_inject_page_fault;
+
+	vcpu->arch.walk_mmu              = &vcpu->arch.nested_mmu;
+
+	return r;
+}
+
+static void nested_ept_uninit_mmu_context(struct kvm_vcpu *vcpu)
+{
+	vcpu->arch.walk_mmu = &vcpu->arch.mmu;
+}
+
 /*
  * prepare_vmcs02 is called when the L1 guest hypervisor runs its nested
  * L2 guest. L1 has a vmcs for L2 (vmcs12), and this function "merges" it
@@ -7388,7 +7582,7 @@ static void prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12)
 		vmcs12->guest_interruptibility_info);
 	vmcs_write32(GUEST_SYSENTER_CS, vmcs12->guest_sysenter_cs);
 	kvm_set_dr(vcpu, 7, vmcs12->guest_dr7);
-	vmcs_writel(GUEST_RFLAGS, vmcs12->guest_rflags);
+	vmx_set_rflags(vcpu, vmcs12->guest_rflags);
 	vmcs_writel(GUEST_PENDING_DBG_EXCEPTIONS,
 		vmcs12->guest_pending_dbg_exceptions);
 	vmcs_writel(GUEST_SYSENTER_ESP, vmcs12->guest_sysenter_esp);
@@ -7508,15 +7702,24 @@ static void prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12)
 	vcpu->arch.cr0_guest_owned_bits &= ~vmcs12->cr0_guest_host_mask;
 	vmcs_writel(CR0_GUEST_HOST_MASK, ~vcpu->arch.cr0_guest_owned_bits);
 
-	/* Note: IA32_MODE, LOAD_IA32_EFER are modified by vmx_set_efer below */
-	vmcs_write32(VM_EXIT_CONTROLS,
-		vmcs12->vm_exit_controls | vmcs_config.vmexit_ctrl);
-	vmcs_write32(VM_ENTRY_CONTROLS, vmcs12->vm_entry_controls |
+	/* L2->L1 exit controls are emulated - the hardware exit is to L0 so
+	 * we should use its exit controls. Note that VM_EXIT_LOAD_IA32_EFER
+	 * bits are further modified by vmx_set_efer() below.
+	 */
+	vmcs_write32(VM_EXIT_CONTROLS, vmcs_config.vmexit_ctrl);
+
+	/* vmcs12's VM_ENTRY_LOAD_IA32_EFER and VM_ENTRY_IA32E_MODE are
+	 * emulated by vmx_set_efer(), below.
+	 */
+	vmcs_write32(VM_ENTRY_CONTROLS,
+		(vmcs12->vm_entry_controls & ~VM_ENTRY_LOAD_IA32_EFER &
+			~VM_ENTRY_IA32E_MODE) |
 		(vmcs_config.vmentry_ctrl & ~VM_ENTRY_IA32E_MODE));
 
-	if (vmcs12->vm_entry_controls & VM_ENTRY_LOAD_IA32_PAT)
+	if (vmcs12->vm_entry_controls & VM_ENTRY_LOAD_IA32_PAT) {
 		vmcs_write64(GUEST_IA32_PAT, vmcs12->guest_ia32_pat);
-	else if (vmcs_config.vmentry_ctrl & VM_ENTRY_LOAD_IA32_PAT)
+		vcpu->arch.pat = vmcs12->guest_ia32_pat;
+	} else if (vmcs_config.vmentry_ctrl & VM_ENTRY_LOAD_IA32_PAT)
 		vmcs_write64(GUEST_IA32_PAT, vmx->vcpu.arch.pat);
 
 
@@ -7538,6 +7741,11 @@ static void prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12)
 		vmx_flush_tlb(vcpu);
 	}
 
+	if (nested_cpu_has_ept(vmcs12)) {
+		kvm_mmu_unload(vcpu);
+		nested_ept_init_mmu_context(vcpu);
+	}
+
 	if (vmcs12->vm_entry_controls & VM_ENTRY_LOAD_IA32_EFER)
 		vcpu->arch.efer = vmcs12->guest_ia32_efer;
 	else if (vmcs12->vm_entry_controls & VM_ENTRY_IA32E_MODE)
@@ -7565,6 +7773,16 @@ static void prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12)
 	kvm_set_cr3(vcpu, vmcs12->guest_cr3);
 	kvm_mmu_reset_context(vcpu);
 
+	/*
+	 * L1 may access the L2's PDPTR, so save them to construct vmcs12
+	 */
+	if (enable_ept) {
+		vmcs_write64(GUEST_PDPTR0, vmcs12->guest_pdptr0);
+		vmcs_write64(GUEST_PDPTR1, vmcs12->guest_pdptr1);
+		vmcs_write64(GUEST_PDPTR2, vmcs12->guest_pdptr2);
+		vmcs_write64(GUEST_PDPTR3, vmcs12->guest_pdptr3);
+	}
+
 	kvm_register_write(vcpu, VCPU_REGS_RSP, vmcs12->guest_rsp);
 	kvm_register_write(vcpu, VCPU_REGS_RIP, vmcs12->guest_rip);
 }
@@ -7887,6 +8105,22 @@ static void prepare_vmcs12(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12)
 	vmcs12->guest_pending_dbg_exceptions =
 		vmcs_readl(GUEST_PENDING_DBG_EXCEPTIONS);
 
+	/*
+	 * In some cases (usually, nested EPT), L2 is allowed to change its
+	 * own CR3 without exiting. If it has changed it, we must keep it.
+	 * Of course, if L0 is using shadow page tables, GUEST_CR3 was defined
+	 * by L0, not L1 or L2, so we mustn't unconditionally copy it to vmcs12.
+	 *
+	 * Additionally, restore L2's PDPTR to vmcs12.
+	 */
+	if (enable_ept) {
+		vmcs12->guest_cr3 = vmcs_read64(GUEST_CR3);
+		vmcs12->guest_pdptr0 = vmcs_read64(GUEST_PDPTR0);
+		vmcs12->guest_pdptr1 = vmcs_read64(GUEST_PDPTR1);
+		vmcs12->guest_pdptr2 = vmcs_read64(GUEST_PDPTR2);
+		vmcs12->guest_pdptr3 = vmcs_read64(GUEST_PDPTR3);
+	}
+
 	vmcs12->vm_entry_controls =
 		(vmcs12->vm_entry_controls & ~VM_ENTRY_IA32E_MODE) |
 		(vmcs_read32(VM_ENTRY_CONTROLS) & VM_ENTRY_IA32E_MODE);
@@ -7948,6 +8182,8 @@ static void prepare_vmcs12(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12)
 static void load_vmcs12_host_state(struct kvm_vcpu *vcpu,
 				   struct vmcs12 *vmcs12)
 {
+	struct kvm_segment seg;
+
 	if (vmcs12->vm_exit_controls & VM_EXIT_LOAD_IA32_EFER)
 		vcpu->arch.efer = vmcs12->host_ia32_efer;
 	else if (vmcs12->vm_exit_controls & VM_EXIT_HOST_ADDR_SPACE_SIZE)
@@ -7982,7 +8218,9 @@ static void load_vmcs12_host_state(struct kvm_vcpu *vcpu,
 	vcpu->arch.cr4_guest_owned_bits = ~vmcs_readl(CR4_GUEST_HOST_MASK);
 	kvm_set_cr4(vcpu, vmcs12->host_cr4);
 
-	/* shadow page tables on either EPT or shadow page tables */
+	if (nested_cpu_has_ept(vmcs12))
+		nested_ept_uninit_mmu_context(vcpu);
+
 	kvm_set_cr3(vcpu, vmcs12->host_cr3);
 	kvm_mmu_reset_context(vcpu);
 
@@ -8001,23 +8239,61 @@ static void load_vmcs12_host_state(struct kvm_vcpu *vcpu,
 	vmcs_writel(GUEST_SYSENTER_EIP, vmcs12->host_ia32_sysenter_eip);
 	vmcs_writel(GUEST_IDTR_BASE, vmcs12->host_idtr_base);
 	vmcs_writel(GUEST_GDTR_BASE, vmcs12->host_gdtr_base);
-	vmcs_writel(GUEST_TR_BASE, vmcs12->host_tr_base);
-	vmcs_writel(GUEST_GS_BASE, vmcs12->host_gs_base);
-	vmcs_writel(GUEST_FS_BASE, vmcs12->host_fs_base);
-	vmcs_write16(GUEST_ES_SELECTOR, vmcs12->host_es_selector);
-	vmcs_write16(GUEST_CS_SELECTOR, vmcs12->host_cs_selector);
-	vmcs_write16(GUEST_SS_SELECTOR, vmcs12->host_ss_selector);
-	vmcs_write16(GUEST_DS_SELECTOR, vmcs12->host_ds_selector);
-	vmcs_write16(GUEST_FS_SELECTOR, vmcs12->host_fs_selector);
-	vmcs_write16(GUEST_GS_SELECTOR, vmcs12->host_gs_selector);
-	vmcs_write16(GUEST_TR_SELECTOR, vmcs12->host_tr_selector);
-
-	if (vmcs12->vm_exit_controls & VM_EXIT_LOAD_IA32_PAT)
+
+	if (vmcs12->vm_exit_controls & VM_EXIT_LOAD_IA32_PAT) {
 		vmcs_write64(GUEST_IA32_PAT, vmcs12->host_ia32_pat);
+		vcpu->arch.pat = vmcs12->host_ia32_pat;
+	}
 	if (vmcs12->vm_exit_controls & VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL)
 		vmcs_write64(GUEST_IA32_PERF_GLOBAL_CTRL,
 			vmcs12->host_ia32_perf_global_ctrl);
 
+	/* Set L1 segment info according to Intel SDM
+	    27.5.2 Loading Host Segment and Descriptor-Table Registers */
+	seg = (struct kvm_segment) {
+		.base = 0,
+		.limit = 0xFFFFFFFF,
+		.selector = vmcs12->host_cs_selector,
+		.type = 11,
+		.present = 1,
+		.s = 1,
+		.g = 1
+	};
+	if (vmcs12->vm_exit_controls & VM_EXIT_HOST_ADDR_SPACE_SIZE)
+		seg.l = 1;
+	else
+		seg.db = 1;
+	vmx_set_segment(vcpu, &seg, VCPU_SREG_CS);
+	seg = (struct kvm_segment) {
+		.base = 0,
+		.limit = 0xFFFFFFFF,
+		.type = 3,
+		.present = 1,
+		.s = 1,
+		.db = 1,
+		.g = 1
+	};
+	seg.selector = vmcs12->host_ds_selector;
+	vmx_set_segment(vcpu, &seg, VCPU_SREG_DS);
+	seg.selector = vmcs12->host_es_selector;
+	vmx_set_segment(vcpu, &seg, VCPU_SREG_ES);
+	seg.selector = vmcs12->host_ss_selector;
+	vmx_set_segment(vcpu, &seg, VCPU_SREG_SS);
+	seg.selector = vmcs12->host_fs_selector;
+	seg.base = vmcs12->host_fs_base;
+	vmx_set_segment(vcpu, &seg, VCPU_SREG_FS);
+	seg.selector = vmcs12->host_gs_selector;
+	seg.base = vmcs12->host_gs_base;
+	vmx_set_segment(vcpu, &seg, VCPU_SREG_GS);
+	seg = (struct kvm_segment) {
+		.base = vmcs12->host_tr_base,
+		.limit = 0x67,
+		.selector = vmcs12->host_tr_selector,
+		.type = 11,
+		.present = 1
+	};
+	vmx_set_segment(vcpu, &seg, VCPU_SREG_TR);
+
 	kvm_set_dr(vcpu, 7, 0x400);
 	vmcs_write64(GUEST_IA32_DEBUGCTL, 0);
 }
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index d21bce5..e5ca72a 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -682,17 +682,6 @@ int kvm_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
 		 */
 	}
 
-	/*
-	 * Does the new cr3 value map to physical memory? (Note, we
-	 * catch an invalid cr3 even in real-mode, because it would
-	 * cause trouble later on when we turn on paging anyway.)
-	 *
-	 * A real CPU would silently accept an invalid cr3 and would
-	 * attempt to use it - with largely undefined (and often hard
-	 * to debug) behavior on the guest side.
-	 */
-	if (unlikely(!gfn_to_memslot(vcpu->kvm, cr3 >> PAGE_SHIFT)))
-		return 1;
 	vcpu->arch.cr3 = cr3;
 	__set_bit(VCPU_EXREG_CR3, (ulong *)&vcpu->arch.regs_avail);
 	vcpu->arch.mmu.new_cr3(vcpu);
@@ -850,7 +839,8 @@ static u32 msrs_to_save[] = {
 #ifdef CONFIG_X86_64
 	MSR_CSTAR, MSR_KERNEL_GS_BASE, MSR_SYSCALL_MASK, MSR_LSTAR,
 #endif
-	MSR_IA32_TSC, MSR_IA32_CR_PAT, MSR_VM_HSAVE_PA
+	MSR_IA32_TSC, MSR_IA32_CR_PAT, MSR_VM_HSAVE_PA,
+	MSR_IA32_FEATURE_CONTROL
 };
 
 static unsigned num_msrs_to_save;
@@ -1457,6 +1447,29 @@ static void pvclock_update_vm_gtod_copy(struct kvm *kvm)
 #endif
 }
 
+static void kvm_gen_update_masterclock(struct kvm *kvm)
+{
+#ifdef CONFIG_X86_64
+	int i;
+	struct kvm_vcpu *vcpu;
+	struct kvm_arch *ka = &kvm->arch;
+
+	spin_lock(&ka->pvclock_gtod_sync_lock);
+	kvm_make_mclock_inprogress_request(kvm);
+	/* no guest entries from this point */
+	pvclock_update_vm_gtod_copy(kvm);
+
+	kvm_for_each_vcpu(i, vcpu, kvm)
+		set_bit(KVM_REQ_CLOCK_UPDATE, &vcpu->requests);
+
+	/* guest entries allowed */
+	kvm_for_each_vcpu(i, vcpu, kvm)
+		clear_bit(KVM_REQ_MCLOCK_INPROGRESS, &vcpu->requests);
+
+	spin_unlock(&ka->pvclock_gtod_sync_lock);
+#endif
+}
+
 static int kvm_guest_time_update(struct kvm_vcpu *v)
 {
 	unsigned long flags, this_tsc_khz;
@@ -3806,6 +3819,7 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		delta = user_ns.clock - now_ns;
 		local_irq_enable();
 		kvm->arch.kvmclock_offset = delta;
+		kvm_gen_update_masterclock(kvm);
 		break;
 	}
 	case KVM_GET_CLOCK: {
@@ -4955,6 +4969,97 @@ static bool retry_instruction(struct x86_emulate_ctxt *ctxt,
 static int complete_emulated_mmio(struct kvm_vcpu *vcpu);
 static int complete_emulated_pio(struct kvm_vcpu *vcpu);
 
+static int kvm_vcpu_check_hw_bp(unsigned long addr, u32 type, u32 dr7,
+				unsigned long *db)
+{
+	u32 dr6 = 0;
+	int i;
+	u32 enable, rwlen;
+
+	enable = dr7;
+	rwlen = dr7 >> 16;
+	for (i = 0; i < 4; i++, enable >>= 2, rwlen >>= 4)
+		if ((enable & 3) && (rwlen & 15) == type && db[i] == addr)
+			dr6 |= (1 << i);
+	return dr6;
+}
+
+static void kvm_vcpu_check_singlestep(struct kvm_vcpu *vcpu, int *r)
+{
+	struct kvm_run *kvm_run = vcpu->run;
+
+	/*
+	 * Use the "raw" value to see if TF was passed to the processor.
+	 * Note that the new value of the flags has not been saved yet.
+	 *
+	 * This is correct even for TF set by the guest, because "the
+	 * processor will not generate this exception after the instruction
+	 * that sets the TF flag".
+	 */
+	unsigned long rflags = kvm_x86_ops->get_rflags(vcpu);
+
+	if (unlikely(rflags & X86_EFLAGS_TF)) {
+		if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP) {
+			kvm_run->debug.arch.dr6 = DR6_BS | DR6_FIXED_1;
+			kvm_run->debug.arch.pc = vcpu->arch.singlestep_rip;
+			kvm_run->debug.arch.exception = DB_VECTOR;
+			kvm_run->exit_reason = KVM_EXIT_DEBUG;
+			*r = EMULATE_USER_EXIT;
+		} else {
+			vcpu->arch.emulate_ctxt.eflags &= ~X86_EFLAGS_TF;
+			/*
+			 * "Certain debug exceptions may clear bit 0-3.  The
+			 * remaining contents of the DR6 register are never
+			 * cleared by the processor".
+			 */
+			vcpu->arch.dr6 &= ~15;
+			vcpu->arch.dr6 |= DR6_BS;
+			kvm_queue_exception(vcpu, DB_VECTOR);
+		}
+	}
+}
+
+static bool kvm_vcpu_check_breakpoint(struct kvm_vcpu *vcpu, int *r)
+{
+	struct kvm_run *kvm_run = vcpu->run;
+	unsigned long eip = vcpu->arch.emulate_ctxt.eip;
+	u32 dr6 = 0;
+
+	if (unlikely(vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP) &&
+	    (vcpu->arch.guest_debug_dr7 & DR7_BP_EN_MASK)) {
+		dr6 = kvm_vcpu_check_hw_bp(eip, 0,
+					   vcpu->arch.guest_debug_dr7,
+					   vcpu->arch.eff_db);
+
+		if (dr6 != 0) {
+			kvm_run->debug.arch.dr6 = dr6 | DR6_FIXED_1;
+			kvm_run->debug.arch.pc = kvm_rip_read(vcpu) +
+				get_segment_base(vcpu, VCPU_SREG_CS);
+
+			kvm_run->debug.arch.exception = DB_VECTOR;
+			kvm_run->exit_reason = KVM_EXIT_DEBUG;
+			*r = EMULATE_USER_EXIT;
+			return true;
+		}
+	}
+
+	if (unlikely(vcpu->arch.dr7 & DR7_BP_EN_MASK)) {
+		dr6 = kvm_vcpu_check_hw_bp(eip, 0,
+					   vcpu->arch.dr7,
+					   vcpu->arch.db);
+
+		if (dr6 != 0) {
+			vcpu->arch.dr6 &= ~15;
+			vcpu->arch.dr6 |= dr6;
+			kvm_queue_exception(vcpu, DB_VECTOR);
+			*r = EMULATE_DONE;
+			return true;
+		}
+	}
+
+	return false;
+}
+
 int x86_emulate_instruction(struct kvm_vcpu *vcpu,
 			    unsigned long cr2,
 			    int emulation_type,
@@ -4975,6 +5080,16 @@ int x86_emulate_instruction(struct kvm_vcpu *vcpu,
 
 	if (!(emulation_type & EMULTYPE_NO_DECODE)) {
 		init_emulate_ctxt(vcpu);
+
+		/*
+		 * We will reenter on the same instruction since
+		 * we do not set complete_userspace_io.  This does not
+		 * handle watchpoints yet, those would be handled in
+		 * the emulate_ops.
+		 */
+		if (kvm_vcpu_check_breakpoint(vcpu, &r))
+			return r;
+
 		ctxt->interruptibility = 0;
 		ctxt->have_exception = false;
 		ctxt->perm_ok = false;
@@ -5031,17 +5146,18 @@ restart:
 		inject_emulated_exception(vcpu);
 		r = EMULATE_DONE;
 	} else if (vcpu->arch.pio.count) {
-		if (!vcpu->arch.pio.in)
+		if (!vcpu->arch.pio.in) {
+			/* FIXME: return into emulator if single-stepping.  */
 			vcpu->arch.pio.count = 0;
-		else {
+		} else {
 			writeback = false;
 			vcpu->arch.complete_userspace_io = complete_emulated_pio;
 		}
-		r = EMULATE_DO_MMIO;
+		r = EMULATE_USER_EXIT;
 	} else if (vcpu->mmio_needed) {
 		if (!vcpu->mmio_is_write)
 			writeback = false;
-		r = EMULATE_DO_MMIO;
+		r = EMULATE_USER_EXIT;
 		vcpu->arch.complete_userspace_io = complete_emulated_mmio;
 	} else if (r == EMULATION_RESTART)
 		goto restart;
@@ -5050,10 +5166,12 @@ restart:
 
 	if (writeback) {
 		toggle_interruptibility(vcpu, ctxt->interruptibility);
-		kvm_set_rflags(vcpu, ctxt->eflags);
 		kvm_make_request(KVM_REQ_EVENT, vcpu);
 		vcpu->arch.emulate_regs_need_sync_to_vcpu = false;
 		kvm_rip_write(vcpu, ctxt->eip);
+		if (r == EMULATE_DONE)
+			kvm_vcpu_check_singlestep(vcpu, &r);
+		kvm_set_rflags(vcpu, ctxt->eflags);
 	} else
 		vcpu->arch.emulate_regs_need_sync_to_vcpu = true;
 
@@ -5347,7 +5465,7 @@ static struct notifier_block pvclock_gtod_notifier = {
 int kvm_arch_init(void *opaque)
 {
 	int r;
-	struct kvm_x86_ops *ops = (struct kvm_x86_ops *)opaque;
+	struct kvm_x86_ops *ops = opaque;
 
 	if (kvm_x86_ops) {
 		printk(KERN_ERR "kvm: already loaded the other module\n");
@@ -5495,6 +5613,23 @@ int kvm_hv_hypercall(struct kvm_vcpu *vcpu)
 	return 1;
 }
 
+/*
+ * kvm_pv_kick_cpu_op:  Kick a vcpu.
+ *
+ * @apicid - apicid of vcpu to be kicked.
+ */
+static void kvm_pv_kick_cpu_op(struct kvm *kvm, unsigned long flags, int apicid)
+{
+	struct kvm_lapic_irq lapic_irq;
+
+	lapic_irq.shorthand = 0;
+	lapic_irq.dest_mode = 0;
+	lapic_irq.dest_id = apicid;
+
+	lapic_irq.delivery_mode = APIC_DM_REMRD;
+	kvm_irq_delivery_to_apic(kvm, 0, &lapic_irq, NULL);
+}
+
 int kvm_emulate_hypercall(struct kvm_vcpu *vcpu)
 {
 	unsigned long nr, a0, a1, a2, a3, ret;
@@ -5528,6 +5663,10 @@ int kvm_emulate_hypercall(struct kvm_vcpu *vcpu)
 	case KVM_HC_VAPIC_POLL_IRQ:
 		ret = 0;
 		break;
+	case KVM_HC_KICK_CPU:
+		kvm_pv_kick_cpu_op(vcpu->kvm, a0, a1);
+		ret = 0;
+		break;
 	default:
 		ret = -KVM_ENOSYS;
 		break;
@@ -5689,29 +5828,6 @@ static void process_nmi(struct kvm_vcpu *vcpu)
 	kvm_make_request(KVM_REQ_EVENT, vcpu);
 }
 
-static void kvm_gen_update_masterclock(struct kvm *kvm)
-{
-#ifdef CONFIG_X86_64
-	int i;
-	struct kvm_vcpu *vcpu;
-	struct kvm_arch *ka = &kvm->arch;
-
-	spin_lock(&ka->pvclock_gtod_sync_lock);
-	kvm_make_mclock_inprogress_request(kvm);
-	/* no guest entries from this point */
-	pvclock_update_vm_gtod_copy(kvm);
-
-	kvm_for_each_vcpu(i, vcpu, kvm)
-		set_bit(KVM_REQ_CLOCK_UPDATE, &vcpu->requests);
-
-	/* guest entries allowed */
-	kvm_for_each_vcpu(i, vcpu, kvm)
-		clear_bit(KVM_REQ_MCLOCK_INPROGRESS, &vcpu->requests);
-
-	spin_unlock(&ka->pvclock_gtod_sync_lock);
-#endif
-}
-
 static void vcpu_scan_ioapic(struct kvm_vcpu *vcpu)
 {
 	u64 eoi_exit_bitmap[4];
@@ -5950,6 +6066,7 @@ static int __vcpu_run(struct kvm_vcpu *vcpu)
 				kvm_apic_accept_events(vcpu);
 				switch(vcpu->arch.mp_state) {
 				case KVM_MP_STATE_HALTED:
+					vcpu->arch.pv.pv_unhalted = false;
 					vcpu->arch.mp_state =
 						KVM_MP_STATE_RUNNABLE;
 				case KVM_MP_STATE_RUNNABLE:
@@ -6061,6 +6178,8 @@ static int complete_emulated_mmio(struct kvm_vcpu *vcpu)
 
 	if (vcpu->mmio_cur_fragment == vcpu->mmio_nr_fragments) {
 		vcpu->mmio_needed = 0;
+
+		/* FIXME: return into emulator if single-stepping.  */
 		if (vcpu->mmio_is_write)
 			return 1;
 		vcpu->mmio_read_completed = 1;
@@ -6249,7 +6368,12 @@ int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
 				    struct kvm_mp_state *mp_state)
 {
 	kvm_apic_accept_events(vcpu);
-	mp_state->mp_state = vcpu->arch.mp_state;
+	if (vcpu->arch.mp_state == KVM_MP_STATE_HALTED &&
+					vcpu->arch.pv.pv_unhalted)
+		mp_state->mp_state = KVM_MP_STATE_RUNNABLE;
+	else
+		mp_state->mp_state = vcpu->arch.mp_state;
+
 	return 0;
 }
 
@@ -6770,6 +6894,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 	BUG_ON(vcpu->kvm == NULL);
 	kvm = vcpu->kvm;
 
+	vcpu->arch.pv.pv_unhalted = false;
 	vcpu->arch.emulate_ctxt.ops = &emulate_ops;
 	if (!irqchip_in_kernel(kvm) || kvm_vcpu_is_bsp(vcpu))
 		vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
@@ -7019,6 +7144,15 @@ out_free:
 	return -ENOMEM;
 }
 
+void kvm_arch_memslots_updated(struct kvm *kvm)
+{
+	/*
+	 * memslots->generation has been incremented.
+	 * mmio generation may have reached its maximum value.
+	 */
+	kvm_mmu_invalidate_mmio_sptes(kvm);
+}
+
 int kvm_arch_prepare_memory_region(struct kvm *kvm,
 				struct kvm_memory_slot *memslot,
 				struct kvm_userspace_memory_region *mem,
@@ -7079,11 +7213,6 @@ void kvm_arch_commit_memory_region(struct kvm *kvm,
 	 */
 	if ((change != KVM_MR_DELETE) && (mem->flags & KVM_MEM_LOG_DIRTY_PAGES))
 		kvm_mmu_slot_remove_write_access(kvm, mem->slot);
-	/*
-	 * If memory slot is created, or moved, we need to clear all
-	 * mmio sptes.
-	 */
-	kvm_mmu_invalidate_mmio_sptes(kvm);
 }
 
 void kvm_arch_flush_shadow_all(struct kvm *kvm)
@@ -7103,6 +7232,7 @@ int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu)
 		!vcpu->arch.apf.halted)
 		|| !list_empty_careful(&vcpu->async_pf.done)
 		|| kvm_apic_has_events(vcpu)
+		|| vcpu->arch.pv.pv_unhalted
 		|| atomic_read(&vcpu->arch.nmi_queued) ||
 		(kvm_arch_interrupt_allowed(vcpu) &&
 		 kvm_cpu_has_interrupt(vcpu));
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 6a22c19..bdf8532 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -7,8 +7,7 @@
  * kernel and insert a module (lg.ko) which allows us to run other Linux
  * kernels the same way we'd run processes.  We call the first kernel the Host,
  * and the others the Guests.  The program which sets up and configures Guests
- * (such as the example in Documentation/virtual/lguest/lguest.c) is called the
- * Launcher.
+ * (such as the example in tools/lguest/lguest.c) is called the Launcher.
  *
  * Secondly, we only run specially modified Guests, not normal kernels: setting
  * CONFIG_LGUEST_GUEST to "y" compiles this file into the kernel so it knows
@@ -1057,6 +1056,12 @@ static void lguest_load_sp0(struct tss_struct *tss,
 }
 
 /* Let's just say, I wouldn't do debugging under a Guest. */
+static unsigned long lguest_get_debugreg(int regno)
+{
+	/* FIXME: Implement */
+	return 0;
+}
+
 static void lguest_set_debugreg(int regno, unsigned long value)
 {
 	/* FIXME: Implement */
@@ -1304,6 +1309,7 @@ __init void lguest_init(void)
 	pv_cpu_ops.load_tr_desc = lguest_load_tr_desc;
 	pv_cpu_ops.set_ldt = lguest_set_ldt;
 	pv_cpu_ops.load_tls = lguest_load_tls;
+	pv_cpu_ops.get_debugreg = lguest_get_debugreg;
 	pv_cpu_ops.set_debugreg = lguest_set_debugreg;
 	pv_cpu_ops.clts = lguest_clts;
 	pv_cpu_ops.read_cr0 = lguest_read_cr0;
diff --git a/arch/x86/lib/csum-wrappers_64.c b/arch/x86/lib/csum-wrappers_64.c
index 25b7ae8..7609e0e 100644
--- a/arch/x86/lib/csum-wrappers_64.c
+++ b/arch/x86/lib/csum-wrappers_64.c
@@ -6,6 +6,7 @@
  */
 #include <asm/checksum.h>
 #include <linux/module.h>
+#include <asm/smap.h>
 
 /**
  * csum_partial_copy_from_user - Copy and checksum from user space.
@@ -52,8 +53,10 @@ csum_partial_copy_from_user(const void __user *src, void *dst,
 			len -= 2;
 		}
 	}
+	stac();
 	isum = csum_partial_copy_generic((__force const void *)src,
 				dst, len, isum, errp, NULL);
+	clac();
 	if (unlikely(*errp))
 		goto out_err;
 
@@ -82,6 +85,8 @@ __wsum
 csum_partial_copy_to_user(const void *src, void __user *dst,
 			  int len, __wsum isum, int *errp)
 {
+	__wsum ret;
+
 	might_sleep();
 
 	if (unlikely(!access_ok(VERIFY_WRITE, dst, len))) {
@@ -105,8 +110,11 @@ csum_partial_copy_to_user(const void *src, void __user *dst,
 	}
 
 	*errp = 0;
-	return csum_partial_copy_generic(src, (void __force *)dst,
-					 len, isum, NULL, errp);
+	stac();
+	ret = csum_partial_copy_generic(src, (void __force *)dst,
+					len, isum, NULL, errp);
+	clac();
+	return ret;
 }
 EXPORT_SYMBOL(csum_partial_copy_to_user);
 
diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c
index 906fea3..c905e89 100644
--- a/arch/x86/lib/usercopy_64.c
+++ b/arch/x86/lib/usercopy_64.c
@@ -68,7 +68,7 @@ EXPORT_SYMBOL(copy_in_user);
  * Since protection fault in copy_from/to_user is not a normal situation,
  * it is not necessary to optimize tail handling.
  */
-unsigned long
+__visible unsigned long
 copy_user_handle_tail(char *to, char *from, unsigned len, unsigned zerorest)
 {
 	char c;
diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt
index 5d7e51f..533a85e 100644
--- a/arch/x86/lib/x86-opcode-map.txt
+++ b/arch/x86/lib/x86-opcode-map.txt
@@ -1,10 +1,8 @@
 # x86 Opcode Maps
 #
 # This is (mostly) based on following documentations.
-# - Intel(R) 64 and IA-32 Architectures Software Developer's Manual Vol.2
-#   (#325383-040US, October 2011)
-# - Intel(R) Advanced Vector Extensions Programming Reference
-#   (#319433-011,JUNE 2011).
+# - Intel(R) 64 and IA-32 Architectures Software Developer's Manual Vol.2C
+#   (#326018-047US, June 2013)
 #
 #<Opcode maps>
 # Table: table-name
@@ -29,6 +27,7 @@
 #  - (F3): the last prefix is 0xF3
 #  - (F2): the last prefix is 0xF2
 #  - (!F3) : the last prefix is not 0xF3 (including non-last prefix case)
+#  - (66&F2): Both 0x66 and 0xF2 prefixes are specified.
 
 Table: one byte opcode
 Referrer:
@@ -246,8 +245,8 @@ c2: RETN Iw (f64)
 c3: RETN
 c4: LES Gz,Mp (i64) | VEX+2byte (Prefix)
 c5: LDS Gz,Mp (i64) | VEX+1byte (Prefix)
-c6: Grp11 Eb,Ib (1A)
-c7: Grp11 Ev,Iz (1A)
+c6: Grp11A Eb,Ib (1A)
+c7: Grp11B Ev,Iz (1A)
 c8: ENTER Iw,Ib
 c9: LEAVE (d64)
 ca: RETF Iw
@@ -293,8 +292,8 @@ ef: OUT DX,eAX
 # 0xf0 - 0xff
 f0: LOCK (Prefix)
 f1:
-f2: REPNE (Prefix)
-f3: REP/REPE (Prefix)
+f2: REPNE (Prefix) | XACQUIRE (Prefix)
+f3: REP/REPE (Prefix) | XRELEASE (Prefix)
 f4: HLT
 f5: CMC
 f6: Grp3_1 Eb (1A)
@@ -326,7 +325,8 @@ AVXcode: 1
 0a:
 0b: UD2 (1B)
 0c:
-0d: NOP Ev | GrpP
+# AMD's prefetch group. Intel supports prefetchw(/1) only.
+0d: GrpP
 0e: FEMMS
 # 3DNow! uses the last imm byte as opcode extension.
 0f: 3DNow! Pq,Qq,Ib
@@ -729,12 +729,12 @@ dc: VAESENC Vdq,Hdq,Wdq (66),(v1)
 dd: VAESENCLAST Vdq,Hdq,Wdq (66),(v1)
 de: VAESDEC Vdq,Hdq,Wdq (66),(v1)
 df: VAESDECLAST Vdq,Hdq,Wdq (66),(v1)
-f0: MOVBE Gy,My | MOVBE Gw,Mw (66) | CRC32 Gd,Eb (F2)
-f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2)
+f0: MOVBE Gy,My | MOVBE Gw,Mw (66) | CRC32 Gd,Eb (F2) | CRC32 Gd,Eb (66&F2)
+f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2) | CRC32 Gd,Ew (66&F2)
 f2: ANDN Gy,By,Ey (v)
 f3: Grp17 (1A)
 f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
-f6: MULX By,Gy,rDX,Ey (F2),(v)
+f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
 f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
 EndTable
 
@@ -861,8 +861,8 @@ EndTable
 
 GrpTable: Grp7
 0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B)
-1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001)
-2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B)
+1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B)
+2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B)
 3: LIDT Ms
 4: SMSW Mw/Rv
 5:
@@ -880,15 +880,21 @@ EndTable
 GrpTable: Grp9
 1: CMPXCHG8B/16B Mq/Mdq
 6: VMPTRLD Mq | VMCLEAR Mq (66) | VMXON Mq (F3) | RDRAND Rv (11B)
-7: VMPTRST Mq | VMPTRST Mq (F3)
+7: VMPTRST Mq | VMPTRST Mq (F3) | RDSEED Rv (11B)
 EndTable
 
 GrpTable: Grp10
 EndTable
 
-GrpTable: Grp11
-# Note: the operands are given by group opcode
-0: MOV
+# Grp11A and Grp11B are expressed as Grp11 in Intel SDM
+GrpTable: Grp11A
+0: MOV Eb,Ib
+7: XABORT Ib (000),(11B)
+EndTable
+
+GrpTable: Grp11B
+0: MOV Eb,Iz
+7: XBEGIN Jz (000),(11B)
 EndTable
 
 GrpTable: Grp12
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 654be4a..3aaeffc 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -842,23 +842,15 @@ do_sigbus(struct pt_regs *regs, unsigned long error_code, unsigned long address,
 	force_sig_info_fault(SIGBUS, code, address, tsk, fault);
 }
 
-static noinline int
+static noinline void
 mm_fault_error(struct pt_regs *regs, unsigned long error_code,
 	       unsigned long address, unsigned int fault)
 {
-	/*
-	 * Pagefault was interrupted by SIGKILL. We have no reason to
-	 * continue pagefault.
-	 */
-	if (fatal_signal_pending(current)) {
-		if (!(fault & VM_FAULT_RETRY))
-			up_read(&current->mm->mmap_sem);
-		if (!(error_code & PF_USER))
-			no_context(regs, error_code, address, 0, 0);
-		return 1;
+	if (fatal_signal_pending(current) && !(error_code & PF_USER)) {
+		up_read(&current->mm->mmap_sem);
+		no_context(regs, error_code, address, 0, 0);
+		return;
 	}
-	if (!(fault & VM_FAULT_ERROR))
-		return 0;
 
 	if (fault & VM_FAULT_OOM) {
 		/* Kernel mode? Handle exceptions or die: */
@@ -866,7 +858,7 @@ mm_fault_error(struct pt_regs *regs, unsigned long error_code,
 			up_read(&current->mm->mmap_sem);
 			no_context(regs, error_code, address,
 				   SIGSEGV, SEGV_MAPERR);
-			return 1;
+			return;
 		}
 
 		up_read(&current->mm->mmap_sem);
@@ -884,7 +876,6 @@ mm_fault_error(struct pt_regs *regs, unsigned long error_code,
 		else
 			BUG();
 	}
-	return 1;
 }
 
 static int spurious_fault_check(unsigned long error_code, pte_t *pte)
@@ -1011,9 +1002,7 @@ __do_page_fault(struct pt_regs *regs, unsigned long error_code)
 	unsigned long address;
 	struct mm_struct *mm;
 	int fault;
-	int write = error_code & PF_WRITE;
-	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
-					(write ? FAULT_FLAG_WRITE : 0);
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
 
 	tsk = current;
 	mm = tsk->mm;
@@ -1083,6 +1072,7 @@ __do_page_fault(struct pt_regs *regs, unsigned long error_code)
 	if (user_mode_vm(regs)) {
 		local_irq_enable();
 		error_code |= PF_USER;
+		flags |= FAULT_FLAG_USER;
 	} else {
 		if (regs->flags & X86_EFLAGS_IF)
 			local_irq_enable();
@@ -1109,6 +1099,9 @@ __do_page_fault(struct pt_regs *regs, unsigned long error_code)
 		return;
 	}
 
+	if (error_code & PF_WRITE)
+		flags |= FAULT_FLAG_WRITE;
+
 	/*
 	 * When running in the kernel we expect faults to occur only to
 	 * addresses in user space.  All other faults represent errors in
@@ -1187,9 +1180,17 @@ good_area:
 	 */
 	fault = handle_mm_fault(mm, vma, address, flags);
 
-	if (unlikely(fault & (VM_FAULT_RETRY|VM_FAULT_ERROR))) {
-		if (mm_fault_error(regs, error_code, address, fault))
-			return;
+	/*
+	 * If we need to retry but a fatal signal is pending, handle the
+	 * signal first. We do not need to release the mmap_sem because it
+	 * would already be released in __lock_page_or_retry in mm/filemap.c.
+	 */
+	if (unlikely((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)))
+		return;
+
+	if (unlikely(fault & VM_FAULT_ERROR)) {
+		mm_fault_error(regs, error_code, address, fault);
+		return;
 	}
 
 	/*
diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c
index 7e73e8c..9d980d8 100644
--- a/arch/x86/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
@@ -59,6 +59,10 @@ follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 	return NULL;
 }
 
+int pmd_huge_support(void)
+{
+	return 0;
+}
 #else
 
 struct page *
@@ -77,6 +81,10 @@ int pud_huge(pud_t pud)
 	return !!(pud_val(pud) & _PAGE_PSE);
 }
 
+int pmd_huge_support(void)
+{
+	return 1;
+}
 #endif
 
 /* x86_64 also uses this file */
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 0215e2c..799580c 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -487,7 +487,7 @@ __early_ioremap(resource_size_t phys_addr, unsigned long size, pgprot_t prot)
 	unsigned long offset;
 	resource_size_t last_addr;
 	unsigned int nrpages;
-	enum fixed_addresses idx0, idx;
+	enum fixed_addresses idx;
 	int i, slot;
 
 	WARN_ON(system_state != SYSTEM_BOOTING);
@@ -540,8 +540,7 @@ __early_ioremap(resource_size_t phys_addr, unsigned long size, pgprot_t prot)
 	/*
 	 * Ok, go for it..
 	 */
-	idx0 = FIX_BTMAP_BEGIN - NR_FIX_BTMAPS*slot;
-	idx = idx0;
+	idx = FIX_BTMAP_BEGIN - NR_FIX_BTMAPS*slot;
 	while (nrpages > 0) {
 		early_set_fixmap(idx, phys_addr, prot);
 		phys_addr += PAGE_SIZE;
diff --git a/arch/x86/mm/srat.c b/arch/x86/mm/srat.c
index cdd0da9..266ca91 100644
--- a/arch/x86/mm/srat.c
+++ b/arch/x86/mm/srat.c
@@ -146,6 +146,7 @@ int __init
 acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
 {
 	u64 start, end;
+	u32 hotpluggable;
 	int node, pxm;
 
 	if (srat_disabled())
@@ -154,7 +155,8 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
 		goto out_err_bad_srat;
 	if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0)
 		goto out_err;
-	if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) && !save_add_info())
+	hotpluggable = ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE;
+	if (hotpluggable && !save_add_info())
 		goto out_err;
 
 	start = ma->base_address;
@@ -174,9 +176,10 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
 
 	node_set(node, numa_nodes_parsed);
 
-	printk(KERN_INFO "SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]\n",
-	       node, pxm,
-	       (unsigned long long) start, (unsigned long long) end - 1);
+	pr_info("SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]%s\n",
+		node, pxm,
+		(unsigned long long) start, (unsigned long long) end - 1,
+		hotpluggable ? " hotplug" : "");
 
 	return 0;
 out_err_bad_srat:
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 282375f..ae699b3 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -103,6 +103,7 @@ static void flush_tlb_func(void *info)
 	if (f->flush_mm != this_cpu_read(cpu_tlbstate.active_mm))
 		return;
 
+	count_vm_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
 	if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_OK) {
 		if (f->flush_end == TLB_FLUSH_ALL)
 			local_flush_tlb();
@@ -130,6 +131,7 @@ void native_flush_tlb_others(const struct cpumask *cpumask,
 	info.flush_start = start;
 	info.flush_end = end;
 
+	count_vm_event(NR_TLB_REMOTE_FLUSH);
 	if (is_uv_system()) {
 		unsigned int cpu;
 
@@ -149,6 +151,7 @@ void flush_tlb_current_task(void)
 
 	preempt_disable();
 
+	count_vm_event(NR_TLB_LOCAL_FLUSH_ALL);
 	local_flush_tlb();
 	if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
 		flush_tlb_others(mm_cpumask(mm), mm, 0UL, TLB_FLUSH_ALL);
@@ -211,16 +214,19 @@ void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
 	act_entries = mm->total_vm > tlb_entries ? tlb_entries : mm->total_vm;
 
 	/* tlb_flushall_shift is on balance point, details in commit log */
-	if ((end - start) >> PAGE_SHIFT > act_entries >> tlb_flushall_shift)
+	if ((end - start) >> PAGE_SHIFT > act_entries >> tlb_flushall_shift) {
+		count_vm_event(NR_TLB_LOCAL_FLUSH_ALL);
 		local_flush_tlb();
-	else {
+	} else {
 		if (has_large_page(mm, start, end)) {
 			local_flush_tlb();
 			goto flush_all;
 		}
 		/* flush range by one by one 'invlpg' */
-		for (addr = start; addr < end;	addr += PAGE_SIZE)
+		for (addr = start; addr < end;	addr += PAGE_SIZE) {
+			count_vm_event(NR_TLB_LOCAL_FLUSH_ONE);
 			__flush_tlb_single(addr);
+		}
 
 		if (cpumask_any_but(mm_cpumask(mm),
 				smp_processor_id()) < nr_cpu_ids)
@@ -256,6 +262,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long start)
 
 static void do_flush_tlb_all(void *info)
 {
+	count_vm_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
 	__flush_tlb_all();
 	if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_LAZY)
 		leave_mm(smp_processor_id());
@@ -263,6 +270,7 @@ static void do_flush_tlb_all(void *info)
 
 void flush_tlb_all(void)
 {
+	count_vm_event(NR_TLB_REMOTE_FLUSH);
 	on_each_cpu(do_flush_tlb_all, NULL, 1);
 }
 
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 79c216a..516593e1 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -772,13 +772,21 @@ out:
 	return;
 }
 
+static void bpf_jit_free_deferred(struct work_struct *work)
+{
+	struct sk_filter *fp = container_of(work, struct sk_filter, work);
+	unsigned long addr = (unsigned long)fp->bpf_func & PAGE_MASK;
+	struct bpf_binary_header *header = (void *)addr;
+
+	set_memory_rw(addr, header->pages);
+	module_free(NULL, header);
+	kfree(fp);
+}
+
 void bpf_jit_free(struct sk_filter *fp)
 {
 	if (fp->bpf_func != sk_run_filter) {
-		unsigned long addr = (unsigned long)fp->bpf_func & PAGE_MASK;
-		struct bpf_binary_header *header = (void *)addr;
-
-		set_memory_rw(addr, header->pages);
-		module_free(NULL, header);
+		INIT_WORK(&fp->work, bpf_jit_free_deferred);
+		schedule_work(&fp->work);
 	}
 }
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 48768df..6890d84 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -403,7 +403,7 @@ static void nmi_cpu_down(void *dummy)
 		nmi_cpu_shutdown(dummy);
 }
 
-static int nmi_create_files(struct super_block *sb, struct dentry *root)
+static int nmi_create_files(struct dentry *root)
 {
 	unsigned int i;
 
@@ -420,14 +420,14 @@ static int nmi_create_files(struct super_block *sb, struct dentry *root)
 			continue;
 
 		snprintf(buf,  sizeof(buf), "%d", i);
-		dir = oprofilefs_mkdir(sb, root, buf);
-		oprofilefs_create_ulong(sb, dir, "enabled", &counter_config[i].enabled);
-		oprofilefs_create_ulong(sb, dir, "event", &counter_config[i].event);
-		oprofilefs_create_ulong(sb, dir, "count", &counter_config[i].count);
-		oprofilefs_create_ulong(sb, dir, "unit_mask", &counter_config[i].unit_mask);
-		oprofilefs_create_ulong(sb, dir, "kernel", &counter_config[i].kernel);
-		oprofilefs_create_ulong(sb, dir, "user", &counter_config[i].user);
-		oprofilefs_create_ulong(sb, dir, "extra", &counter_config[i].extra);
+		dir = oprofilefs_mkdir(root, buf);
+		oprofilefs_create_ulong(dir, "enabled", &counter_config[i].enabled);
+		oprofilefs_create_ulong(dir, "event", &counter_config[i].event);
+		oprofilefs_create_ulong(dir, "count", &counter_config[i].count);
+		oprofilefs_create_ulong(dir, "unit_mask", &counter_config[i].unit_mask);
+		oprofilefs_create_ulong(dir, "kernel", &counter_config[i].kernel);
+		oprofilefs_create_ulong(dir, "user", &counter_config[i].user);
+		oprofilefs_create_ulong(dir, "extra", &counter_config[i].extra);
 	}
 
 	return 0;
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index b2b94438..50d86c0 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -454,16 +454,16 @@ static void init_ibs(void)
 	printk(KERN_INFO "oprofile: AMD IBS detected (0x%08x)\n", ibs_caps);
 }
 
-static int (*create_arch_files)(struct super_block *sb, struct dentry *root);
+static int (*create_arch_files)(struct dentry *root);
 
-static int setup_ibs_files(struct super_block *sb, struct dentry *root)
+static int setup_ibs_files(struct dentry *root)
 {
 	struct dentry *dir;
 	int ret = 0;
 
 	/* architecture specific files */
 	if (create_arch_files)
-		ret = create_arch_files(sb, root);
+		ret = create_arch_files(root);
 
 	if (ret)
 		return ret;
@@ -479,26 +479,26 @@ static int setup_ibs_files(struct super_block *sb, struct dentry *root)
 	ibs_config.max_cnt_op = 250000;
 
 	if (ibs_caps & IBS_CAPS_FETCHSAM) {
-		dir = oprofilefs_mkdir(sb, root, "ibs_fetch");
-		oprofilefs_create_ulong(sb, dir, "enable",
+		dir = oprofilefs_mkdir(root, "ibs_fetch");
+		oprofilefs_create_ulong(dir, "enable",
 					&ibs_config.fetch_enabled);
-		oprofilefs_create_ulong(sb, dir, "max_count",
+		oprofilefs_create_ulong(dir, "max_count",
 					&ibs_config.max_cnt_fetch);
-		oprofilefs_create_ulong(sb, dir, "rand_enable",
+		oprofilefs_create_ulong(dir, "rand_enable",
 					&ibs_config.rand_en);
 	}
 
 	if (ibs_caps & IBS_CAPS_OPSAM) {
-		dir = oprofilefs_mkdir(sb, root, "ibs_op");
-		oprofilefs_create_ulong(sb, dir, "enable",
+		dir = oprofilefs_mkdir(root, "ibs_op");
+		oprofilefs_create_ulong(dir, "enable",
 					&ibs_config.op_enabled);
-		oprofilefs_create_ulong(sb, dir, "max_count",
+		oprofilefs_create_ulong(dir, "max_count",
 					&ibs_config.max_cnt_op);
 		if (ibs_caps & IBS_CAPS_OPCNT)
-			oprofilefs_create_ulong(sb, dir, "dispatched_ops",
+			oprofilefs_create_ulong(dir, "dispatched_ops",
 						&ibs_config.dispatched_ops);
 		if (ibs_caps & IBS_CAPS_BRNTRGT)
-			oprofilefs_create_ulong(sb, dir, "branch_target",
+			oprofilefs_create_ulong(dir, "branch_target",
 						&ibs_config.branch_target);
 	}
 
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index d641897..b30e937 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -568,13 +568,8 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
 	 */
 	if (bus) {
 		struct pci_bus *child;
-		list_for_each_entry(child, &bus->children, node) {
-			struct pci_dev *self = child->self;
-			if (!self)
-				continue;
-
-			pcie_bus_configure_settings(child, self->pcie_mpss);
-		}
+		list_for_each_entry(child, &bus->children, node)
+			pcie_bus_configure_settings(child);
 	}
 
 	if (bus && node != -1) {
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 94919e3..db6b1ab 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -210,6 +210,8 @@ static void pcibios_allocate_bridge_resources(struct pci_dev *dev)
 		r = &dev->resource[idx];
 		if (!r->flags)
 			continue;
+		if (r->parent)	/* Already allocated */
+			continue;
 		if (!r->start || pci_claim_resource(dev, idx) < 0) {
 			/*
 			 * Something is wrong with the region.
@@ -318,6 +320,8 @@ static void pcibios_allocate_dev_rom_resource(struct pci_dev *dev)
 	r = &dev->resource[PCI_ROM_RESOURCE];
 	if (!r->flags || !r->start)
 		return;
+	if (r->parent) /* Already allocated */
+		return;
 
 	if (pci_claim_resource(dev, PCI_ROM_RESOURCE) < 0) {
 		r->end -= r->start;
diff --git a/arch/x86/pci/mrst.c b/arch/x86/pci/mrst.c
index 6eb18c4..903fded 100644
--- a/arch/x86/pci/mrst.c
+++ b/arch/x86/pci/mrst.c
@@ -23,11 +23,11 @@
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/dmi.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/smp.h>
 
-#include <asm/acpi.h>
 #include <asm/segment.h>
-#include <asm/io.h>
-#include <asm/smp.h>
 #include <asm/pci_x86.h>
 #include <asm/hw_irq.h>
 #include <asm/io_apic.h>
@@ -43,7 +43,7 @@
 #define PCI_FIXED_BAR_4_SIZE	0x14
 #define PCI_FIXED_BAR_5_SIZE	0x1c
 
-static int pci_soc_mode = 0;
+static int pci_soc_mode;
 
 /**
  * fixed_bar_cap - return the offset of the fixed BAR cap if found
@@ -141,7 +141,8 @@ static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn,
  */
 static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg)
 {
-	/* This is a workaround for A0 LNC bug where PCI status register does
+	/*
+	 * This is a workaround for A0 LNC bug where PCI status register does
 	 * not have new CAP bit set. can not be written by SW either.
 	 *
 	 * PCI header type in real LNC indicates a single function device, this
@@ -154,7 +155,7 @@ static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg)
 				|| devfn == PCI_DEVFN(0, 0)
 				|| devfn == PCI_DEVFN(3, 0)))
 		return 1;
-	return 0; /* langwell on others */
+	return 0; /* Langwell on others */
 }
 
 static int pci_read(struct pci_bus *bus, unsigned int devfn, int where,
@@ -172,7 +173,8 @@ static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
 {
 	int offset;
 
-	/* On MRST, there is no PCI ROM BAR, this will cause a subsequent read
+	/*
+	 * On MRST, there is no PCI ROM BAR, this will cause a subsequent read
 	 * to ROM BAR return 0 then being ignored.
 	 */
 	if (where == PCI_ROM_ADDRESS)
@@ -210,7 +212,8 @@ static int mrst_pci_irq_enable(struct pci_dev *dev)
 
 	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
 
-	/* MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
+	/*
+	 * MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
 	 * IOAPIC RTE entries, so we just enable RTE for the device.
 	 */
 	irq_attr.ioapic = mp_find_ioapic(dev->irq);
@@ -235,7 +238,7 @@ struct pci_ops pci_mrst_ops = {
  */
 int __init pci_mrst_init(void)
 {
-	printk(KERN_INFO "Intel MID platform detected, using MID PCI ops\n");
+	pr_info("Intel MID platform detected, using MID PCI ops\n");
 	pci_mmcfg_late_init();
 	pcibios_enable_irq = mrst_pci_irq_enable;
 	pci_root_ops = pci_mrst_ops;
@@ -244,17 +247,21 @@ int __init pci_mrst_init(void)
 	return 1;
 }
 
-/* Langwell devices are not true pci devices, they are not subject to 10 ms
- * d3 to d0 delay required by pci spec.
+/*
+ * Langwell devices are not true PCI devices; they are not subject to 10 ms
+ * d3 to d0 delay required by PCI spec.
  */
 static void pci_d3delay_fixup(struct pci_dev *dev)
 {
-	/* PCI fixups are effectively decided compile time. If we have a dual
-	   SoC/non-SoC kernel we don't want to mangle d3 on non SoC devices */
-        if (!pci_soc_mode)
-            return;
-	/* true pci devices in lincroft should allow type 1 access, the rest
-	 * are langwell fake pci devices.
+	/*
+	 * PCI fixups are effectively decided compile time. If we have a dual
+	 * SoC/non-SoC kernel we don't want to mangle d3 on non-SoC devices.
+	 */
+	if (!pci_soc_mode)
+		return;
+	/*
+	 * True PCI devices in Lincroft should allow type 1 access, the rest
+	 * are Langwell fake PCI devices.
 	 */
 	if (type1_access_ok(dev->bus->number, dev->devfn, PCI_DEVICE_ID))
 		return;
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index 90f6ed1..c7e22ab 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -912,10 +912,13 @@ void __init efi_enter_virtual_mode(void)
 
 	for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
 		md = p;
-		if (!(md->attribute & EFI_MEMORY_RUNTIME) &&
-		    md->type != EFI_BOOT_SERVICES_CODE &&
-		    md->type != EFI_BOOT_SERVICES_DATA)
-			continue;
+		if (!(md->attribute & EFI_MEMORY_RUNTIME)) {
+#ifdef CONFIG_X86_64
+			if (md->type != EFI_BOOT_SERVICES_CODE &&
+			    md->type != EFI_BOOT_SERVICES_DATA)
+#endif
+				continue;
+		}
 
 		size = md->num_pages << EFI_PAGE_SHIFT;
 		end = md->phys_addr + size;
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index 47fe66f..3ca5957 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -20,7 +20,7 @@
 #include <linux/intel_pmic_gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/platform_device.h>
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index 1cf5b30..424f4c9 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -25,10 +25,10 @@
 #include <asm/cpu.h>
 
 #ifdef CONFIG_X86_32
-unsigned long saved_context_ebx;
-unsigned long saved_context_esp, saved_context_ebp;
-unsigned long saved_context_esi, saved_context_edi;
-unsigned long saved_context_eflags;
+__visible unsigned long saved_context_ebx;
+__visible unsigned long saved_context_esp, saved_context_ebp;
+__visible unsigned long saved_context_esi, saved_context_edi;
+__visible unsigned long saved_context_eflags;
 #endif
 struct saved_context saved_context;
 
diff --git a/arch/x86/power/hibernate_64.c b/arch/x86/power/hibernate_64.c
index a0fde91..304fca2 100644
--- a/arch/x86/power/hibernate_64.c
+++ b/arch/x86/power/hibernate_64.c
@@ -20,26 +20,26 @@
 #include <asm/suspend.h>
 
 /* References to section boundaries */
-extern const void __nosave_begin, __nosave_end;
+extern __visible const void __nosave_begin, __nosave_end;
 
 /* Defined in hibernate_asm_64.S */
-extern int restore_image(void);
+extern asmlinkage int restore_image(void);
 
 /*
  * Address to jump to in the last phase of restore in order to get to the image
  * kernel's text (this value is passed in the image header).
  */
-unsigned long restore_jump_address;
+unsigned long restore_jump_address __visible;
 
 /*
  * Value of the cr3 register from before the hibernation (this value is passed
  * in the image header).
  */
-unsigned long restore_cr3;
+unsigned long restore_cr3 __visible;
 
-pgd_t *temp_level4_pgt;
+pgd_t *temp_level4_pgt __visible;
 
-void *relocated_restore_code;
+void *relocated_restore_code __visible;
 
 static void *alloc_pgt_page(void *context)
 {
diff --git a/arch/x86/tools/gen-insn-attr-x86.awk b/arch/x86/tools/gen-insn-attr-x86.awk
index e6773dc..093a892 100644
--- a/arch/x86/tools/gen-insn-attr-x86.awk
+++ b/arch/x86/tools/gen-insn-attr-x86.awk
@@ -68,7 +68,7 @@ BEGIN {
 
 	lprefix1_expr = "\\((66|!F3)\\)"
 	lprefix2_expr = "\\(F3\\)"
-	lprefix3_expr = "\\((F2|!F3)\\)"
+	lprefix3_expr = "\\((F2|!F3|66\\&F2)\\)"
 	lprefix_expr = "\\((66|F2|F3)\\)"
 	max_lprefix = 4
 
@@ -83,6 +83,8 @@ BEGIN {
 	prefix_num["Operand-Size"] = "INAT_PFX_OPNDSZ"
 	prefix_num["REPNE"] = "INAT_PFX_REPNE"
 	prefix_num["REP/REPE"] = "INAT_PFX_REPE"
+	prefix_num["XACQUIRE"] = "INAT_PFX_REPNE"
+	prefix_num["XRELEASE"] = "INAT_PFX_REPE"
 	prefix_num["LOCK"] = "INAT_PFX_LOCK"
 	prefix_num["SEG=CS"] = "INAT_PFX_CS"
 	prefix_num["SEG=DS"] = "INAT_PFX_DS"
diff --git a/arch/x86/um/os-Linux/prctl.c b/arch/x86/um/os-Linux/prctl.c
index 9d34edd..96eb2bd 100644
--- a/arch/x86/um/os-Linux/prctl.c
+++ b/arch/x86/um/os-Linux/prctl.c
@@ -4,7 +4,7 @@
  */
 
 #include <sys/ptrace.h>
-#include <linux/ptrace.h>
+#include <asm/ptrace.h>
 
 int os_arch_prctl(int pid, int code, unsigned long *addr)
 {
diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c
index c74436e..72074d5 100644
--- a/arch/x86/vdso/vclock_gettime.c
+++ b/arch/x86/vdso/vclock_gettime.c
@@ -85,15 +85,18 @@ static notrace cycle_t vread_pvclock(int *mode)
 	cycle_t ret;
 	u64 last;
 	u32 version;
-	u32 migrate_count;
 	u8 flags;
 	unsigned cpu, cpu1;
 
 
 	/*
-	 * When looping to get a consistent (time-info, tsc) pair, we
-	 * also need to deal with the possibility we can switch vcpus,
-	 * so make sure we always re-fetch time-info for the current vcpu.
+	 * Note: hypervisor must guarantee that:
+	 * 1. cpu ID number maps 1:1 to per-CPU pvclock time info.
+	 * 2. that per-CPU pvclock time info is updated if the
+	 *    underlying CPU changes.
+	 * 3. that version is increased whenever underlying CPU
+	 *    changes.
+	 *
 	 */
 	do {
 		cpu = __getcpu() & VGETCPU_CPU_MASK;
@@ -104,8 +107,6 @@ static notrace cycle_t vread_pvclock(int *mode)
 
 		pvti = get_pvti(cpu);
 
-		migrate_count = pvti->migrate_count;
-
 		version = __pvclock_read_cycles(&pvti->pvti, &ret, &flags);
 
 		/*
@@ -117,8 +118,7 @@ static notrace cycle_t vread_pvclock(int *mode)
 		cpu1 = __getcpu() & VGETCPU_CPU_MASK;
 	} while (unlikely(cpu != cpu1 ||
 			  (pvti->pvti.version & 1) ||
-			  pvti->pvti.version != version ||
-			  pvti->migrate_count != migrate_count));
+			  pvti->pvti.version != version));
 
 	if (unlikely(!(flags & PVCLOCK_TSC_STABLE_BIT)))
 		*mode = VCLOCK_NONE;
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 193097e..fa6ade7 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -427,8 +427,7 @@ static void __init xen_init_cpuid_mask(void)
 
 	if (!xen_initial_domain())
 		cpuid_leaf1_edx_mask &=
-			~((1 << X86_FEATURE_APIC) |  /* disable local APIC */
-			  (1 << X86_FEATURE_ACPI));  /* disable ACPI */
+			~((1 << X86_FEATURE_ACPI));  /* disable ACPI */
 
 	cpuid_leaf1_ecx_mask &= ~(1 << (X86_FEATURE_X2APIC % 32));
 
@@ -735,8 +734,7 @@ static int cvt_gate_to_trap(int vector, const gate_desc *val,
 		addr = (unsigned long)xen_int3;
 	else if (addr == (unsigned long)stack_segment)
 		addr = (unsigned long)xen_stack_segment;
-	else if (addr == (unsigned long)double_fault ||
-		 addr == (unsigned long)nmi) {
+	else if (addr == (unsigned long)double_fault) {
 		/* Don't need to handle these */
 		return 0;
 #ifdef CONFIG_X86_MCE
@@ -747,7 +745,12 @@ static int cvt_gate_to_trap(int vector, const gate_desc *val,
 		 */
 		;
 #endif
-	} else {
+	} else if (addr == (unsigned long)nmi)
+		/*
+		 * Use the native version as well.
+		 */
+		;
+	else {
 		/* Some other trap using IST? */
 		if (WARN_ON(val->ist != 0))
 			return 0;
@@ -1689,7 +1692,6 @@ static int xen_hvm_cpu_notify(struct notifier_block *self, unsigned long action,
 	case CPU_UP_PREPARE:
 		xen_vcpu_setup(cpu);
 		if (xen_have_vector_callback) {
-			xen_init_lock_cpu(cpu);
 			if (xen_feature(XENFEAT_hvm_safe_pvclock))
 				xen_setup_timer(cpu);
 		}
@@ -1710,6 +1712,8 @@ static void __init xen_hvm_guest_init(void)
 
 	xen_hvm_init_shared_info();
 
+	xen_panic_handler_init();
+
 	if (xen_feature(XENFEAT_hvm_callback_vector))
 		xen_have_vector_callback = 1;
 	xen_hvm_smp_init();
@@ -1720,15 +1724,12 @@ static void __init xen_hvm_guest_init(void)
 	xen_hvm_init_mmu_ops();
 }
 
-static bool __init xen_hvm_platform(void)
+static uint32_t __init xen_hvm_platform(void)
 {
 	if (xen_pv_domain())
-		return false;
-
-	if (!xen_cpuid_base())
-		return false;
+		return 0;
 
-	return true;
+	return xen_cpuid_base();
 }
 
 bool xen_hvm_need_lapic(void)
diff --git a/arch/x86/xen/irq.c b/arch/x86/xen/irq.c
index 01a4dc0..0da7f86 100644
--- a/arch/x86/xen/irq.c
+++ b/arch/x86/xen/irq.c
@@ -47,23 +47,18 @@ static void xen_restore_fl(unsigned long flags)
 	/* convert from IF type flag */
 	flags = !(flags & X86_EFLAGS_IF);
 
-	/* There's a one instruction preempt window here.  We need to
-	   make sure we're don't switch CPUs between getting the vcpu
-	   pointer and updating the mask. */
+	/* See xen_irq_enable() for why preemption must be disabled. */
 	preempt_disable();
 	vcpu = this_cpu_read(xen_vcpu);
 	vcpu->evtchn_upcall_mask = flags;
-	preempt_enable_no_resched();
-
-	/* Doesn't matter if we get preempted here, because any
-	   pending event will get dealt with anyway. */
 
 	if (flags == 0) {
-		preempt_check_resched();
 		barrier(); /* unmask then check (avoid races) */
 		if (unlikely(vcpu->evtchn_upcall_pending))
 			xen_force_evtchn_callback();
-	}
+		preempt_enable();
+	} else
+		preempt_enable_no_resched();
 }
 PV_CALLEE_SAVE_REGS_THUNK(xen_restore_fl);
 
@@ -82,10 +77,12 @@ static void xen_irq_enable(void)
 {
 	struct vcpu_info *vcpu;
 
-	/* We don't need to worry about being preempted here, since
-	   either a) interrupts are disabled, so no preemption, or b)
-	   the caller is confused and is trying to re-enable interrupts
-	   on an indeterminate processor. */
+	/*
+	 * We may be preempted as soon as vcpu->evtchn_upcall_mask is
+	 * cleared, so disable preemption to ensure we check for
+	 * events on the VCPU we are still running on.
+	 */
+	preempt_disable();
 
 	vcpu = this_cpu_read(xen_vcpu);
 	vcpu->evtchn_upcall_mask = 0;
@@ -96,6 +93,8 @@ static void xen_irq_enable(void)
 	barrier(); /* unmask then check (avoid races) */
 	if (unlikely(vcpu->evtchn_upcall_pending))
 		xen_force_evtchn_callback();
+
+	preempt_enable();
 }
 PV_CALLEE_SAVE_REGS_THUNK(xen_irq_enable);
 
diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c
index 95fb2aa..a61c7d5 100644
--- a/arch/x86/xen/p2m.c
+++ b/arch/x86/xen/p2m.c
@@ -161,6 +161,7 @@
 #include <asm/xen/page.h>
 #include <asm/xen/hypercall.h>
 #include <asm/xen/hypervisor.h>
+#include <xen/balloon.h>
 #include <xen/grant_table.h>
 
 #include "multicalls.h"
@@ -878,7 +879,6 @@ int m2p_add_override(unsigned long mfn, struct page *page,
 	unsigned long uninitialized_var(address);
 	unsigned level;
 	pte_t *ptep = NULL;
-	int ret = 0;
 
 	pfn = page_to_pfn(page);
 	if (!PageHighMem(page)) {
@@ -925,8 +925,8 @@ int m2p_add_override(unsigned long mfn, struct page *page,
 	 * frontend pages while they are being shared with the backend,
 	 * because mfn_to_pfn (that ends up being called by GUPF) will
 	 * return the backend pfn rather than the frontend pfn. */
-	ret = __get_user(pfn, &machine_to_phys_mapping[mfn]);
-	if (ret == 0 && get_phys_to_machine(pfn) == mfn)
+	pfn = mfn_to_pfn_no_overrides(mfn);
+	if (get_phys_to_machine(pfn) == mfn)
 		set_phys_to_machine(pfn, FOREIGN_FRAME(mfn));
 
 	return 0;
@@ -941,7 +941,6 @@ int m2p_remove_override(struct page *page,
 	unsigned long uninitialized_var(address);
 	unsigned level;
 	pte_t *ptep = NULL;
-	int ret = 0;
 
 	pfn = page_to_pfn(page);
 	mfn = get_phys_to_machine(pfn);
@@ -967,7 +966,10 @@ int m2p_remove_override(struct page *page,
 	if (kmap_op != NULL) {
 		if (!PageHighMem(page)) {
 			struct multicall_space mcs;
-			struct gnttab_unmap_grant_ref *unmap_op;
+			struct gnttab_unmap_and_replace *unmap_op;
+			struct page *scratch_page = get_balloon_scratch_page();
+			unsigned long scratch_page_address = (unsigned long)
+				__va(page_to_pfn(scratch_page) << PAGE_SHIFT);
 
 			/*
 			 * It might be that we queued all the m2p grant table
@@ -986,25 +988,31 @@ int m2p_remove_override(struct page *page,
 				printk(KERN_WARNING "m2p_remove_override: "
 						"pfn %lx mfn %lx, failed to modify kernel mappings",
 						pfn, mfn);
+				put_balloon_scratch_page();
 				return -1;
 			}
 
-			mcs = xen_mc_entry(
-					sizeof(struct gnttab_unmap_grant_ref));
+			xen_mc_batch();
+
+			mcs = __xen_mc_entry(
+					sizeof(struct gnttab_unmap_and_replace));
 			unmap_op = mcs.args;
 			unmap_op->host_addr = kmap_op->host_addr;
+			unmap_op->new_addr = scratch_page_address;
 			unmap_op->handle = kmap_op->handle;
-			unmap_op->dev_bus_addr = 0;
 
 			MULTI_grant_table_op(mcs.mc,
-					GNTTABOP_unmap_grant_ref, unmap_op, 1);
+					GNTTABOP_unmap_and_replace, unmap_op, 1);
+
+			mcs = __xen_mc_entry(0);
+			MULTI_update_va_mapping(mcs.mc, scratch_page_address,
+					pfn_pte(page_to_pfn(scratch_page),
+					PAGE_KERNEL_RO), 0);
 
 			xen_mc_issue(PARAVIRT_LAZY_MMU);
 
-			set_pte_at(&init_mm, address, ptep,
-					pfn_pte(pfn, PAGE_KERNEL));
-			__flush_tlb_single(address);
 			kmap_op->host_addr = 0;
+			put_balloon_scratch_page();
 		}
 	}
 
@@ -1019,8 +1027,8 @@ int m2p_remove_override(struct page *page,
 	 * the original pfn causes mfn_to_pfn(mfn) to return the frontend
 	 * pfn again. */
 	mfn &= ~FOREIGN_FRAME_BIT;
-	ret = __get_user(pfn, &machine_to_phys_mapping[mfn]);
-	if (ret == 0 && get_phys_to_machine(pfn) == FOREIGN_FRAME(mfn) &&
+	pfn = mfn_to_pfn_no_overrides(mfn);
+	if (get_phys_to_machine(pfn) == FOREIGN_FRAME(mfn) &&
 			m2p_find_override(mfn) == NULL)
 		set_phys_to_machine(pfn, mfn);
 
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 8f3eea6..09f3059 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -33,6 +33,9 @@
 /* These are code, but not functions.  Defined in entry.S */
 extern const char xen_hypervisor_callback[];
 extern const char xen_failsafe_callback[];
+#ifdef CONFIG_X86_64
+extern const char nmi[];
+#endif
 extern void xen_sysenter_target(void);
 extern void xen_syscall_target(void);
 extern void xen_syscall32_target(void);
@@ -215,13 +218,19 @@ static void __init xen_set_identity_and_release_chunk(
 	unsigned long pfn;
 
 	/*
-	 * If the PFNs are currently mapped, the VA mapping also needs
-	 * to be updated to be 1:1.
+	 * If the PFNs are currently mapped, clear the mappings
+	 * (except for the ISA region which must be 1:1 mapped) to
+	 * release the refcounts (in Xen) on the original frames.
 	 */
-	for (pfn = start_pfn; pfn <= max_pfn_mapped && pfn < end_pfn; pfn++)
+	for (pfn = start_pfn; pfn <= max_pfn_mapped && pfn < end_pfn; pfn++) {
+		pte_t pte = __pte_ma(0);
+
+		if (pfn < PFN_UP(ISA_END_ADDRESS))
+			pte = mfn_pte(pfn, PAGE_KERNEL_IO);
+
 		(void)HYPERVISOR_update_va_mapping(
-			(unsigned long)__va(pfn << PAGE_SHIFT),
-			mfn_pte(pfn, PAGE_KERNEL_IO), 0);
+			(unsigned long)__va(pfn << PAGE_SHIFT), pte, 0);
+	}
 
 	if (start_pfn < nr_pages)
 		*released += xen_release_chunk(
@@ -547,7 +556,13 @@ void xen_enable_syscall(void)
 	}
 #endif /* CONFIG_X86_64 */
 }
-
+void __cpuinit xen_enable_nmi(void)
+{
+#ifdef CONFIG_X86_64
+	if (register_callback(CALLBACKTYPE_nmi, nmi))
+		BUG();
+#endif
+}
 void __init xen_arch_setup(void)
 {
 	xen_panic_handler_init();
@@ -565,7 +580,7 @@ void __init xen_arch_setup(void)
 
 	xen_enable_sysenter();
 	xen_enable_syscall();
-
+	xen_enable_nmi();
 #ifdef CONFIG_ACPI
 	if (!(xen_start_info->flags & SIF_INITDOMAIN)) {
 		printk(KERN_INFO "ACPI in unprivileged domain disabled\n");
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index b81c88e..31d0475 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -273,12 +273,30 @@ static void __init xen_smp_prepare_boot_cpu(void)
 	BUG_ON(smp_processor_id() != 0);
 	native_smp_prepare_boot_cpu();
 
-	/* We've switched to the "real" per-cpu gdt, so make sure the
-	   old memory can be recycled */
-	make_lowmem_page_readwrite(xen_initial_gdt);
+	if (xen_pv_domain()) {
+		/* We've switched to the "real" per-cpu gdt, so make sure the
+		   old memory can be recycled */
+		make_lowmem_page_readwrite(xen_initial_gdt);
 
-	xen_filter_cpu_maps();
-	xen_setup_vcpu_info_placement();
+#ifdef CONFIG_X86_32
+		/*
+		 * Xen starts us with XEN_FLAT_RING1_DS, but linux code
+		 * expects __USER_DS
+		 */
+		loadsegment(ds, __USER_DS);
+		loadsegment(es, __USER_DS);
+#endif
+
+		xen_filter_cpu_maps();
+		xen_setup_vcpu_info_placement();
+	}
+	/*
+	 * The alternative logic (which patches the unlock/lock) runs before
+	 * the smp bootup up code is activated. Hence we need to set this up
+	 * the core kernel is being patched. Otherwise we will have only
+	 * modules patched but not core code.
+	 */
+	xen_init_spinlocks();
 }
 
 static void __init xen_smp_prepare_cpus(unsigned int max_cpus)
@@ -572,6 +590,12 @@ static inline int xen_map_vector(int vector)
 	case IRQ_WORK_VECTOR:
 		xen_vector = XEN_IRQ_WORK_VECTOR;
 		break;
+#ifdef CONFIG_X86_64
+	case NMI_VECTOR:
+	case APIC_DM_NMI: /* Some use that instead of NMI_VECTOR */
+		xen_vector = XEN_NMI_VECTOR;
+		break;
+#endif
 	default:
 		xen_vector = -1;
 		printk(KERN_ERR "xen: vector 0x%x is not implemented\n",
@@ -680,7 +704,6 @@ void __init xen_smp_init(void)
 {
 	smp_ops = xen_smp_ops;
 	xen_fill_possible_map();
-	xen_init_spinlocks();
 }
 
 static void __init xen_hvm_smp_prepare_cpus(unsigned int max_cpus)
@@ -703,6 +726,15 @@ static int xen_hvm_cpu_up(unsigned int cpu, struct task_struct *tidle)
 	WARN_ON(rc);
 	if (!rc)
 		rc =  native_cpu_up(cpu, tidle);
+
+	/*
+	 * We must initialize the slowpath CPU kicker _after_ the native
+	 * path has executed. If we initialized it before none of the
+	 * unlocker IPI kicks would reach the booting CPU as the booting
+	 * CPU had not set itself 'online' in cpu_online_mask. That mask
+	 * is checked when IPIs are sent (on HVM at least).
+	 */
+	xen_init_lock_cpu(cpu);
 	return rc;
 }
 
@@ -722,4 +754,5 @@ void __init xen_hvm_smp_init(void)
 	smp_ops.cpu_die = xen_hvm_cpu_die;
 	smp_ops.send_call_func_ipi = xen_smp_send_call_function_ipi;
 	smp_ops.send_call_func_single_ipi = xen_smp_send_call_function_single_ipi;
+	smp_ops.smp_prepare_boot_cpu = xen_smp_prepare_boot_cpu;
 }
diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c
index cf3caee..be6b860 100644
--- a/arch/x86/xen/spinlock.c
+++ b/arch/x86/xen/spinlock.c
@@ -17,45 +17,44 @@
 #include "xen-ops.h"
 #include "debugfs.h"
 
-#ifdef CONFIG_XEN_DEBUG_FS
-static struct xen_spinlock_stats
-{
-	u64 taken;
-	u32 taken_slow;
-	u32 taken_slow_nested;
-	u32 taken_slow_pickup;
-	u32 taken_slow_spurious;
-	u32 taken_slow_irqenable;
+enum xen_contention_stat {
+	TAKEN_SLOW,
+	TAKEN_SLOW_PICKUP,
+	TAKEN_SLOW_SPURIOUS,
+	RELEASED_SLOW,
+	RELEASED_SLOW_KICKED,
+	NR_CONTENTION_STATS
+};
 
-	u64 released;
-	u32 released_slow;
-	u32 released_slow_kicked;
 
+#ifdef CONFIG_XEN_DEBUG_FS
 #define HISTO_BUCKETS	30
-	u32 histo_spin_total[HISTO_BUCKETS+1];
-	u32 histo_spin_spinning[HISTO_BUCKETS+1];
+static struct xen_spinlock_stats
+{
+	u32 contention_stats[NR_CONTENTION_STATS];
 	u32 histo_spin_blocked[HISTO_BUCKETS+1];
-
-	u64 time_total;
-	u64 time_spinning;
 	u64 time_blocked;
 } spinlock_stats;
 
 static u8 zero_stats;
 
-static unsigned lock_timeout = 1 << 10;
-#define TIMEOUT lock_timeout
-
 static inline void check_zero(void)
 {
-	if (unlikely(zero_stats)) {
-		memset(&spinlock_stats, 0, sizeof(spinlock_stats));
-		zero_stats = 0;
+	u8 ret;
+	u8 old = ACCESS_ONCE(zero_stats);
+	if (unlikely(old)) {
+		ret = cmpxchg(&zero_stats, old, 0);
+		/* This ensures only one fellow resets the stat */
+		if (ret == old)
+			memset(&spinlock_stats, 0, sizeof(spinlock_stats));
 	}
 }
 
-#define ADD_STATS(elem, val)			\
-	do { check_zero(); spinlock_stats.elem += (val); } while(0)
+static inline void add_stats(enum xen_contention_stat var, u32 val)
+{
+	check_zero();
+	spinlock_stats.contention_stats[var] += val;
+}
 
 static inline u64 spin_time_start(void)
 {
@@ -74,22 +73,6 @@ static void __spin_time_accum(u64 delta, u32 *array)
 		array[HISTO_BUCKETS]++;
 }
 
-static inline void spin_time_accum_spinning(u64 start)
-{
-	u32 delta = xen_clocksource_read() - start;
-
-	__spin_time_accum(delta, spinlock_stats.histo_spin_spinning);
-	spinlock_stats.time_spinning += delta;
-}
-
-static inline void spin_time_accum_total(u64 start)
-{
-	u32 delta = xen_clocksource_read() - start;
-
-	__spin_time_accum(delta, spinlock_stats.histo_spin_total);
-	spinlock_stats.time_total += delta;
-}
-
 static inline void spin_time_accum_blocked(u64 start)
 {
 	u32 delta = xen_clocksource_read() - start;
@@ -98,263 +81,138 @@ static inline void spin_time_accum_blocked(u64 start)
 	spinlock_stats.time_blocked += delta;
 }
 #else  /* !CONFIG_XEN_DEBUG_FS */
-#define TIMEOUT			(1 << 10)
-#define ADD_STATS(elem, val)	do { (void)(val); } while(0)
+static inline void add_stats(enum xen_contention_stat var, u32 val)
+{
+}
 
 static inline u64 spin_time_start(void)
 {
 	return 0;
 }
 
-static inline void spin_time_accum_total(u64 start)
-{
-}
-static inline void spin_time_accum_spinning(u64 start)
-{
-}
 static inline void spin_time_accum_blocked(u64 start)
 {
 }
 #endif  /* CONFIG_XEN_DEBUG_FS */
 
-/*
- * Size struct xen_spinlock so it's the same as arch_spinlock_t.
- */
-#if NR_CPUS < 256
-typedef u8 xen_spinners_t;
-# define inc_spinners(xl) \
-	asm(LOCK_PREFIX " incb %0" : "+m" ((xl)->spinners) : : "memory");
-# define dec_spinners(xl) \
-	asm(LOCK_PREFIX " decb %0" : "+m" ((xl)->spinners) : : "memory");
-#else
-typedef u16 xen_spinners_t;
-# define inc_spinners(xl) \
-	asm(LOCK_PREFIX " incw %0" : "+m" ((xl)->spinners) : : "memory");
-# define dec_spinners(xl) \
-	asm(LOCK_PREFIX " decw %0" : "+m" ((xl)->spinners) : : "memory");
-#endif
-
-struct xen_spinlock {
-	unsigned char lock;		/* 0 -> free; 1 -> locked */
-	xen_spinners_t spinners;	/* count of waiting cpus */
+struct xen_lock_waiting {
+	struct arch_spinlock *lock;
+	__ticket_t want;
 };
 
-static int xen_spin_is_locked(struct arch_spinlock *lock)
-{
-	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
-
-	return xl->lock != 0;
-}
-
-static int xen_spin_is_contended(struct arch_spinlock *lock)
-{
-	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
-
-	/* Not strictly true; this is only the count of contended
-	   lock-takers entering the slow path. */
-	return xl->spinners != 0;
-}
-
-static int xen_spin_trylock(struct arch_spinlock *lock)
-{
-	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
-	u8 old = 1;
-
-	asm("xchgb %b0,%1"
-	    : "+q" (old), "+m" (xl->lock) : : "memory");
-
-	return old == 0;
-}
-
-static DEFINE_PER_CPU(char *, irq_name);
 static DEFINE_PER_CPU(int, lock_kicker_irq) = -1;
-static DEFINE_PER_CPU(struct xen_spinlock *, lock_spinners);
-
-/*
- * Mark a cpu as interested in a lock.  Returns the CPU's previous
- * lock of interest, in case we got preempted by an interrupt.
- */
-static inline struct xen_spinlock *spinning_lock(struct xen_spinlock *xl)
-{
-	struct xen_spinlock *prev;
-
-	prev = __this_cpu_read(lock_spinners);
-	__this_cpu_write(lock_spinners, xl);
-
-	wmb();			/* set lock of interest before count */
-
-	inc_spinners(xl);
-
-	return prev;
-}
-
-/*
- * Mark a cpu as no longer interested in a lock.  Restores previous
- * lock of interest (NULL for none).
- */
-static inline void unspinning_lock(struct xen_spinlock *xl, struct xen_spinlock *prev)
-{
-	dec_spinners(xl);
-	wmb();			/* decrement count before restoring lock */
-	__this_cpu_write(lock_spinners, prev);
-}
+static DEFINE_PER_CPU(char *, irq_name);
+static DEFINE_PER_CPU(struct xen_lock_waiting, lock_waiting);
+static cpumask_t waiting_cpus;
 
-static noinline int xen_spin_lock_slow(struct arch_spinlock *lock, bool irq_enable)
+static bool xen_pvspin = true;
+static void xen_lock_spinning(struct arch_spinlock *lock, __ticket_t want)
 {
-	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
-	struct xen_spinlock *prev;
 	int irq = __this_cpu_read(lock_kicker_irq);
-	int ret;
+	struct xen_lock_waiting *w = &__get_cpu_var(lock_waiting);
+	int cpu = smp_processor_id();
 	u64 start;
+	unsigned long flags;
 
 	/* If kicker interrupts not initialized yet, just spin */
 	if (irq == -1)
-		return 0;
+		return;
 
 	start = spin_time_start();
 
-	/* announce we're spinning */
-	prev = spinning_lock(xl);
+	/*
+	 * Make sure an interrupt handler can't upset things in a
+	 * partially setup state.
+	 */
+	local_irq_save(flags);
+	/*
+	 * We don't really care if we're overwriting some other
+	 * (lock,want) pair, as that would mean that we're currently
+	 * in an interrupt context, and the outer context had
+	 * interrupts enabled.  That has already kicked the VCPU out
+	 * of xen_poll_irq(), so it will just return spuriously and
+	 * retry with newly setup (lock,want).
+	 *
+	 * The ordering protocol on this is that the "lock" pointer
+	 * may only be set non-NULL if the "want" ticket is correct.
+	 * If we're updating "want", we must first clear "lock".
+	 */
+	w->lock = NULL;
+	smp_wmb();
+	w->want = want;
+	smp_wmb();
+	w->lock = lock;
 
-	ADD_STATS(taken_slow, 1);
-	ADD_STATS(taken_slow_nested, prev != NULL);
+	/* This uses set_bit, which atomic and therefore a barrier */
+	cpumask_set_cpu(cpu, &waiting_cpus);
+	add_stats(TAKEN_SLOW, 1);
 
-	do {
-		unsigned long flags;
+	/* clear pending */
+	xen_clear_irq_pending(irq);
 
-		/* clear pending */
-		xen_clear_irq_pending(irq);
+	/* Only check lock once pending cleared */
+	barrier();
 
-		/* check again make sure it didn't become free while
-		   we weren't looking  */
-		ret = xen_spin_trylock(lock);
-		if (ret) {
-			ADD_STATS(taken_slow_pickup, 1);
+	/*
+	 * Mark entry to slowpath before doing the pickup test to make
+	 * sure we don't deadlock with an unlocker.
+	 */
+	__ticket_enter_slowpath(lock);
 
-			/*
-			 * If we interrupted another spinlock while it
-			 * was blocking, make sure it doesn't block
-			 * without rechecking the lock.
-			 */
-			if (prev != NULL)
-				xen_set_irq_pending(irq);
-			goto out;
-		}
+	/*
+	 * check again make sure it didn't become free while
+	 * we weren't looking
+	 */
+	if (ACCESS_ONCE(lock->tickets.head) == want) {
+		add_stats(TAKEN_SLOW_PICKUP, 1);
+		goto out;
+	}
 
-		flags = arch_local_save_flags();
-		if (irq_enable) {
-			ADD_STATS(taken_slow_irqenable, 1);
-			raw_local_irq_enable();
-		}
+	/* Allow interrupts while blocked */
+	local_irq_restore(flags);
 
-		/*
-		 * Block until irq becomes pending.  If we're
-		 * interrupted at this point (after the trylock but
-		 * before entering the block), then the nested lock
-		 * handler guarantees that the irq will be left
-		 * pending if there's any chance the lock became free;
-		 * xen_poll_irq() returns immediately if the irq is
-		 * pending.
-		 */
-		xen_poll_irq(irq);
+	/*
+	 * If an interrupt happens here, it will leave the wakeup irq
+	 * pending, which will cause xen_poll_irq() to return
+	 * immediately.
+	 */
 
-		raw_local_irq_restore(flags);
+	/* Block until irq becomes pending (or perhaps a spurious wakeup) */
+	xen_poll_irq(irq);
+	add_stats(TAKEN_SLOW_SPURIOUS, !xen_test_irq_pending(irq));
 
-		ADD_STATS(taken_slow_spurious, !xen_test_irq_pending(irq));
-	} while (!xen_test_irq_pending(irq)); /* check for spurious wakeups */
+	local_irq_save(flags);
 
 	kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq));
-
 out:
-	unspinning_lock(xl, prev);
-	spin_time_accum_blocked(start);
-
-	return ret;
-}
-
-static inline void __xen_spin_lock(struct arch_spinlock *lock, bool irq_enable)
-{
-	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
-	unsigned timeout;
-	u8 oldval;
-	u64 start_spin;
-
-	ADD_STATS(taken, 1);
-
-	start_spin = spin_time_start();
-
-	do {
-		u64 start_spin_fast = spin_time_start();
+	cpumask_clear_cpu(cpu, &waiting_cpus);
+	w->lock = NULL;
 
-		timeout = TIMEOUT;
+	local_irq_restore(flags);
 
-		asm("1: xchgb %1,%0\n"
-		    "   testb %1,%1\n"
-		    "   jz 3f\n"
-		    "2: rep;nop\n"
-		    "   cmpb $0,%0\n"
-		    "   je 1b\n"
-		    "   dec %2\n"
-		    "   jnz 2b\n"
-		    "3:\n"
-		    : "+m" (xl->lock), "=q" (oldval), "+r" (timeout)
-		    : "1" (1)
-		    : "memory");
-
-		spin_time_accum_spinning(start_spin_fast);
-
-	} while (unlikely(oldval != 0 &&
-			  (TIMEOUT == ~0 || !xen_spin_lock_slow(lock, irq_enable))));
-
-	spin_time_accum_total(start_spin);
-}
-
-static void xen_spin_lock(struct arch_spinlock *lock)
-{
-	__xen_spin_lock(lock, false);
-}
-
-static void xen_spin_lock_flags(struct arch_spinlock *lock, unsigned long flags)
-{
-	__xen_spin_lock(lock, !raw_irqs_disabled_flags(flags));
+	spin_time_accum_blocked(start);
 }
+PV_CALLEE_SAVE_REGS_THUNK(xen_lock_spinning);
 
-static noinline void xen_spin_unlock_slow(struct xen_spinlock *xl)
+static void xen_unlock_kick(struct arch_spinlock *lock, __ticket_t next)
 {
 	int cpu;
 
-	ADD_STATS(released_slow, 1);
+	add_stats(RELEASED_SLOW, 1);
 
-	for_each_online_cpu(cpu) {
-		/* XXX should mix up next cpu selection */
-		if (per_cpu(lock_spinners, cpu) == xl) {
-			ADD_STATS(released_slow_kicked, 1);
+	for_each_cpu(cpu, &waiting_cpus) {
+		const struct xen_lock_waiting *w = &per_cpu(lock_waiting, cpu);
+
+		/* Make sure we read lock before want */
+		if (ACCESS_ONCE(w->lock) == lock &&
+		    ACCESS_ONCE(w->want) == next) {
+			add_stats(RELEASED_SLOW_KICKED, 1);
 			xen_send_IPI_one(cpu, XEN_SPIN_UNLOCK_VECTOR);
+			break;
 		}
 	}
 }
 
-static void xen_spin_unlock(struct arch_spinlock *lock)
-{
-	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
-
-	ADD_STATS(released, 1);
-
-	smp_wmb();		/* make sure no writes get moved after unlock */
-	xl->lock = 0;		/* release lock */
-
-	/*
-	 * Make sure unlock happens before checking for waiting
-	 * spinners.  We need a strong barrier to enforce the
-	 * write-read ordering to different memory locations, as the
-	 * CPU makes no implied guarantees about their ordering.
-	 */
-	mb();
-
-	if (unlikely(xl->spinners))
-		xen_spin_unlock_slow(xl);
-}
-
 static irqreturn_t dummy_handler(int irq, void *dev_id)
 {
 	BUG();
@@ -366,16 +224,12 @@ void xen_init_lock_cpu(int cpu)
 	int irq;
 	char *name;
 
+	if (!xen_pvspin)
+		return;
+
 	WARN(per_cpu(lock_kicker_irq, cpu) >= 0, "spinlock on CPU%d exists on IRQ%d!\n",
 	     cpu, per_cpu(lock_kicker_irq, cpu));
 
-	/*
-	 * See git commit f10cd522c5fbfec9ae3cc01967868c9c2401ed23
-	 * (xen: disable PV spinlocks on HVM)
-	 */
-	if (xen_hvm_domain())
-		return;
-
 	name = kasprintf(GFP_KERNEL, "spinlock%d", cpu);
 	irq = bind_ipi_to_irqhandler(XEN_SPIN_UNLOCK_VECTOR,
 				     cpu,
@@ -395,11 +249,7 @@ void xen_init_lock_cpu(int cpu)
 
 void xen_uninit_lock_cpu(int cpu)
 {
-	/*
-	 * See git commit f10cd522c5fbfec9ae3cc01967868c9c2401ed23
-	 * (xen: disable PV spinlocks on HVM)
-	 */
-	if (xen_hvm_domain())
+	if (!xen_pvspin)
 		return;
 
 	unbind_from_irqhandler(per_cpu(lock_kicker_irq, cpu), NULL);
@@ -408,24 +258,49 @@ void xen_uninit_lock_cpu(int cpu)
 	per_cpu(irq_name, cpu) = NULL;
 }
 
+
+/*
+ * Our init of PV spinlocks is split in two init functions due to us
+ * using paravirt patching and jump labels patching and having to do
+ * all of this before SMP code is invoked.
+ *
+ * The paravirt patching needs to be done _before_ the alternative asm code
+ * is started, otherwise we would not patch the core kernel code.
+ */
 void __init xen_init_spinlocks(void)
 {
-	/*
-	 * See git commit f10cd522c5fbfec9ae3cc01967868c9c2401ed23
-	 * (xen: disable PV spinlocks on HVM)
-	 */
-	if (xen_hvm_domain())
+
+	if (!xen_pvspin) {
+		printk(KERN_DEBUG "xen: PV spinlocks disabled\n");
 		return;
+	}
+
+	pv_lock_ops.lock_spinning = PV_CALLEE_SAVE(xen_lock_spinning);
+	pv_lock_ops.unlock_kick = xen_unlock_kick;
+}
+
+/*
+ * While the jump_label init code needs to happend _after_ the jump labels are
+ * enabled and before SMP is started. Hence we use pre-SMP initcall level
+ * init. We cannot do it in xen_init_spinlocks as that is done before
+ * jump labels are activated.
+ */
+static __init int xen_init_spinlocks_jump(void)
+{
+	if (!xen_pvspin)
+		return 0;
 
-	BUILD_BUG_ON(sizeof(struct xen_spinlock) > sizeof(arch_spinlock_t));
+	static_key_slow_inc(&paravirt_ticketlocks_enabled);
+	return 0;
+}
+early_initcall(xen_init_spinlocks_jump);
 
-	pv_lock_ops.spin_is_locked = xen_spin_is_locked;
-	pv_lock_ops.spin_is_contended = xen_spin_is_contended;
-	pv_lock_ops.spin_lock = xen_spin_lock;
-	pv_lock_ops.spin_lock_flags = xen_spin_lock_flags;
-	pv_lock_ops.spin_trylock = xen_spin_trylock;
-	pv_lock_ops.spin_unlock = xen_spin_unlock;
+static __init int xen_parse_nopvspin(char *arg)
+{
+	xen_pvspin = false;
+	return 0;
 }
+early_param("xen_nopvspin", xen_parse_nopvspin);
 
 #ifdef CONFIG_XEN_DEBUG_FS
 
@@ -438,41 +313,28 @@ static int __init xen_spinlock_debugfs(void)
 	if (d_xen == NULL)
 		return -ENOMEM;
 
+	if (!xen_pvspin)
+		return 0;
+
 	d_spin_debug = debugfs_create_dir("spinlocks", d_xen);
 
 	debugfs_create_u8("zero_stats", 0644, d_spin_debug, &zero_stats);
 
-	debugfs_create_u32("timeout", 0644, d_spin_debug, &lock_timeout);
-
-	debugfs_create_u64("taken", 0444, d_spin_debug, &spinlock_stats.taken);
 	debugfs_create_u32("taken_slow", 0444, d_spin_debug,
-			   &spinlock_stats.taken_slow);
-	debugfs_create_u32("taken_slow_nested", 0444, d_spin_debug,
-			   &spinlock_stats.taken_slow_nested);
+			   &spinlock_stats.contention_stats[TAKEN_SLOW]);
 	debugfs_create_u32("taken_slow_pickup", 0444, d_spin_debug,
-			   &spinlock_stats.taken_slow_pickup);
+			   &spinlock_stats.contention_stats[TAKEN_SLOW_PICKUP]);
 	debugfs_create_u32("taken_slow_spurious", 0444, d_spin_debug,
-			   &spinlock_stats.taken_slow_spurious);
-	debugfs_create_u32("taken_slow_irqenable", 0444, d_spin_debug,
-			   &spinlock_stats.taken_slow_irqenable);
+			   &spinlock_stats.contention_stats[TAKEN_SLOW_SPURIOUS]);
 
-	debugfs_create_u64("released", 0444, d_spin_debug, &spinlock_stats.released);
 	debugfs_create_u32("released_slow", 0444, d_spin_debug,
-			   &spinlock_stats.released_slow);
+			   &spinlock_stats.contention_stats[RELEASED_SLOW]);
 	debugfs_create_u32("released_slow_kicked", 0444, d_spin_debug,
-			   &spinlock_stats.released_slow_kicked);
+			   &spinlock_stats.contention_stats[RELEASED_SLOW_KICKED]);
 
-	debugfs_create_u64("time_spinning", 0444, d_spin_debug,
-			   &spinlock_stats.time_spinning);
 	debugfs_create_u64("time_blocked", 0444, d_spin_debug,
 			   &spinlock_stats.time_blocked);
-	debugfs_create_u64("time_total", 0444, d_spin_debug,
-			   &spinlock_stats.time_total);
 
-	debugfs_create_u32_array("histo_total", 0444, d_spin_debug,
-				spinlock_stats.histo_spin_total, HISTO_BUCKETS + 1);
-	debugfs_create_u32_array("histo_spinning", 0444, d_spin_debug,
-				spinlock_stats.histo_spin_spinning, HISTO_BUCKETS + 1);
 	debugfs_create_u32_array("histo_blocked", 0444, d_spin_debug,
 				spinlock_stats.histo_spin_blocked, HISTO_BUCKETS + 1);
 
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index 86782c5..95f8c61 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -105,9 +105,9 @@ static inline void __init xen_init_apic(void)
 /* Declare an asm function, along with symbols needed to make it
    inlineable */
 #define DECL_ASM(ret, name, ...)		\
-	ret name(__VA_ARGS__);			\
-	extern char name##_end[];		\
-	extern char name##_reloc[]		\
+	__visible ret name(__VA_ARGS__);	\
+	extern char name##_end[] __visible;	\
+	extern char name##_reloc[] __visible
 
 DECL_ASM(void, xen_irq_enable_direct, void);
 DECL_ASM(void, xen_irq_disable_direct, void);
@@ -115,11 +115,11 @@ DECL_ASM(unsigned long, xen_save_fl_direct, void);
 DECL_ASM(void, xen_restore_fl_direct, unsigned long);
 
 /* These are not functions, and cannot be called normally */
-void xen_iret(void);
-void xen_sysexit(void);
-void xen_sysret32(void);
-void xen_sysret64(void);
-void xen_adjust_exception_frame(void);
+__visible void xen_iret(void);
+__visible void xen_sysexit(void);
+__visible void xen_sysret32(void);
+__visible void xen_sysret64(void);
+__visible void xen_adjust_exception_frame(void);
 
 extern int xen_panic_handler_init(void);
 
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 7ea6451..8d24dcb 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -7,7 +7,6 @@ config XTENSA
 	select HAVE_IDE
 	select GENERIC_ATOMIC64
 	select GENERIC_CLOCKEVENTS
-	select HAVE_GENERIC_HARDIRQS
 	select VIRT_TO_BUS
 	select GENERIC_IRQ_SHOW
 	select GENERIC_CPU_DEVICES
diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile
index 136224b..81250ec 100644
--- a/arch/xtensa/Makefile
+++ b/arch/xtensa/Makefile
@@ -55,10 +55,10 @@ ifneq ($(CONFIG_LD_NO_RELAX),)
 LDFLAGS := --no-relax
 endif
 
-ifeq ($(shell echo -e __XTENSA_EB__ | $(CC) -E - | grep -v "\#"),1)
+ifeq ($(shell echo __XTENSA_EB__ | $(CC) -E - | grep -v "\#"),1)
 CHECKFLAGS += -D__XTENSA_EB__
 endif
-ifeq ($(shell echo -e __XTENSA_EL__ | $(CC) -E - | grep -v "\#"),1)
+ifeq ($(shell echo __XTENSA_EL__ | $(CC) -E - | grep -v "\#"),1)
 CHECKFLAGS += -D__XTENSA_EL__
 endif
 
diff --git a/arch/xtensa/boot/Makefile b/arch/xtensa/boot/Makefile
index 64ffc4b..ca20a89 100644
--- a/arch/xtensa/boot/Makefile
+++ b/arch/xtensa/boot/Makefile
@@ -12,7 +12,7 @@
 KBUILD_CFLAGS	+= -fno-builtin -Iarch/$(ARCH)/boot/include
 HOSTFLAGS	+= -Iarch/$(ARCH)/boot/include
 
-BIG_ENDIAN	:= $(shell echo -e __XTENSA_EB__ | $(CC) -E - | grep -v "\#")
+BIG_ENDIAN	:= $(shell echo __XTENSA_EB__ | $(CC) -E - | grep -v "\#")
 
 export ccflags-y
 export BIG_ENDIAN
diff --git a/arch/xtensa/configs/common_defconfig b/arch/xtensa/configs/common_defconfig
index a182a4e..f6000fe 100644
--- a/arch/xtensa/configs/common_defconfig
+++ b/arch/xtensa/configs/common_defconfig
@@ -8,7 +8,6 @@ CONFIG_XTENSA=y
 # CONFIG_UID16 is not set
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_HAVE_DEC_LOCK=y
-CONFIG_GENERIC_HARDIRQS=y
 
 #
 # Code maturity level options
diff --git a/arch/xtensa/configs/iss_defconfig b/arch/xtensa/configs/iss_defconfig
index 77c52f8..4f23320 100644
--- a/arch/xtensa/configs/iss_defconfig
+++ b/arch/xtensa/configs/iss_defconfig
@@ -9,7 +9,6 @@ CONFIG_XTENSA=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_NO_IOPORT=y
diff --git a/arch/xtensa/configs/s6105_defconfig b/arch/xtensa/configs/s6105_defconfig
index 4799c6a..d929f77 100644
--- a/arch/xtensa/configs/s6105_defconfig
+++ b/arch/xtensa/configs/s6105_defconfig
@@ -9,7 +9,6 @@ CONFIG_XTENSA=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_NO_IOPORT=y
diff --git a/arch/xtensa/include/asm/regs.h b/arch/xtensa/include/asm/regs.h
index b24de67..4ba9f51 100644
--- a/arch/xtensa/include/asm/regs.h
+++ b/arch/xtensa/include/asm/regs.h
@@ -82,6 +82,7 @@
 #define PS_CALLINC_SHIFT	16
 #define PS_CALLINC_MASK		0x00030000
 #define PS_OWB_SHIFT		8
+#define PS_OWB_WIDTH		4
 #define PS_OWB_MASK		0x00000F00
 #define PS_RING_SHIFT		6
 #define PS_RING_MASK		0x000000C0
diff --git a/arch/xtensa/include/asm/timex.h b/arch/xtensa/include/asm/timex.h
index 69f9017..27fa3c1 100644
--- a/arch/xtensa/include/asm/timex.h
+++ b/arch/xtensa/include/asm/timex.h
@@ -35,13 +35,7 @@
 # error "Bad timer number for Linux configurations!"
 #endif
 
-#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
 extern unsigned long ccount_freq;
-#define CCOUNT_PER_JIFFY (ccount_freq / HZ)
-#else
-#define CCOUNT_PER_JIFFY (CONFIG_XTENSA_CPU_CLOCK*(1000000UL/HZ))
-#endif
-
 
 typedef unsigned long long cycles_t;
 
diff --git a/arch/xtensa/kernel/align.S b/arch/xtensa/kernel/align.S
index aa2e87b..d4cef60 100644
--- a/arch/xtensa/kernel/align.S
+++ b/arch/xtensa/kernel/align.S
@@ -146,9 +146,9 @@
  *   a0:	trashed, original value saved on stack (PT_AREG0)
  *   a1:	a1
  *   a2:	new stack pointer, original in DEPC
- *   a3:	dispatch table
+ *   a3:	a3
  *   depc:	a2, original value saved on stack (PT_DEPC)
- *   excsave_1:	a3
+ *   excsave_1:	dispatch table
  *
  *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
  *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
@@ -171,7 +171,6 @@ ENTRY(fast_unaligned)
 	s32i	a8, a2, PT_AREG8
 
 	rsr	a0, depc
-	xsr	a3, excsave1
 	s32i	a0, a2, PT_AREG2
 	s32i	a3, a2, PT_AREG3
 
diff --git a/arch/xtensa/kernel/coprocessor.S b/arch/xtensa/kernel/coprocessor.S
index 6476574..a482df5 100644
--- a/arch/xtensa/kernel/coprocessor.S
+++ b/arch/xtensa/kernel/coprocessor.S
@@ -32,9 +32,9 @@
  *   a0:	trashed, original value saved on stack (PT_AREG0)
  *   a1:	a1
  *   a2:	new stack pointer, original in DEPC
- *   a3:	dispatch table
+ *   a3:	a3
  *   depc:	a2, original value saved on stack (PT_DEPC)
- *   excsave_1:	a3
+ *   excsave_1:	dispatch table
  *
  *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
  *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
@@ -225,9 +225,9 @@ ENDPROC(coprocessor_restore)
  *   a0:	trashed, original value saved on stack (PT_AREG0)
  *   a1:	a1
  *   a2:	new stack pointer, original in DEPC
- *   a3:	dispatch table
+ *   a3:	a3
  *   depc:	a2, original value saved on stack (PT_DEPC)
- *   excsave_1:	a3
+ *   excsave_1:	dispatch table
  *
  *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
  *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
@@ -245,7 +245,6 @@ ENTRY(fast_coprocessor)
 
 	/* Save remaining registers a1-a3 and SAR */
 
-	xsr	a3, excsave1
 	s32i	a3, a2, PT_AREG3
 	rsr	a3, sar
 	s32i	a1, a2, PT_AREG1
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 9298742..21dbe6b 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -31,8 +31,6 @@
 /* Unimplemented features. */
 
 #undef KERNEL_STACK_OVERFLOW_CHECK
-#undef PREEMPTIBLE_KERNEL
-#undef ALLOCA_EXCEPTION_IN_IRAM
 
 /* Not well tested.
  *
@@ -92,9 +90,9 @@
  *   a0:	trashed, original value saved on stack (PT_AREG0)
  *   a1:	a1
  *   a2:	new stack pointer, original value in depc
- *   a3:	dispatch table
+ *   a3:	a3
  *   depc:	a2, original value saved on stack (PT_DEPC)
- *   excsave1:	a3
+ *   excsave1:	dispatch table
  *
  *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
  *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
@@ -110,9 +108,8 @@
 
 ENTRY(user_exception)
 
-	/* Save a2, a3, and depc, restore excsave_1 and set SP. */
+	/* Save a1, a2, a3, and set SP. */
 
-	xsr	a3, excsave1
 	rsr	a0, depc
 	s32i	a1, a2, PT_AREG1
 	s32i	a0, a2, PT_AREG2
@@ -238,9 +235,9 @@ ENDPROC(user_exception)
  *   a0:	trashed, original value saved on stack (PT_AREG0)
  *   a1:	a1
  *   a2:	new stack pointer, original in DEPC
- *   a3:	dispatch table
+ *   a3:	a3
  *   depc:	a2, original value saved on stack (PT_DEPC)
- *   excsave_1:	a3
+ *   excsave_1:	dispatch table
  *
  *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
  *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
@@ -256,9 +253,8 @@ ENDPROC(user_exception)
 
 ENTRY(kernel_exception)
 
-	/* Save a0, a2, a3, DEPC and set SP. */
+	/* Save a1, a2, a3, and set SP. */
 
-	xsr	a3, excsave1		# restore a3, excsave_1
 	rsr	a0, depc		# get a2
 	s32i	a1, a2, PT_AREG1
 	s32i	a0, a2, PT_AREG2
@@ -409,7 +405,7 @@ common_exception:
 	 * exception handler and call the exception handler.
 	 */
 
-	movi	a4, exc_table
+	rsr	a4, excsave1
 	mov	a6, a1			# pass stack frame
 	mov	a7, a0			# pass EXCCAUSE
 	addx4	a4, a0, a4
@@ -423,28 +419,15 @@ common_exception:
 	.global common_exception_return
 common_exception_return:
 
-#ifdef CONFIG_TRACE_IRQFLAGS
-	l32i	a4, a1, PT_DEPC
-	/* Double exception means we came here with an exception
-	 * while PS.EXCM was set, i.e. interrupts disabled.
-	 */
-	bgeui	a4, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
-	l32i	a4, a1, PT_EXCCAUSE
-	bnei	a4, EXCCAUSE_LEVEL1_INTERRUPT, 1f
-	/* We came here with an interrupt means interrupts were enabled
-	 * and we'll reenable them on return.
-	 */
-	movi	a4, trace_hardirqs_on
-	callx4	a4
 1:
-#endif
+	rsil	a2, LOCKLEVEL
 
 	/* Jump if we are returning from kernel exceptions. */
 
-1:	l32i	a3, a1, PT_PS
-	_bbci.l	a3, PS_UM_BIT, 4f
-
-	rsil	a2, 0
+	l32i	a3, a1, PT_PS
+	GET_THREAD_INFO(a2, a1)
+	l32i	a4, a2, TI_FLAGS
+	_bbci.l	a3, PS_UM_BIT, 6f
 
 	/* Specific to a user exception exit:
 	 * We need to check some flags for signal handling and rescheduling,
@@ -453,9 +436,6 @@ common_exception_return:
 	 * Note that we don't disable interrupts here. 
 	 */
 
-	GET_THREAD_INFO(a2,a1)
-	l32i	a4, a2, TI_FLAGS
-
 	_bbsi.l	a4, TIF_NEED_RESCHED, 3f
 	_bbsi.l	a4, TIF_NOTIFY_RESUME, 2f
 	_bbci.l	a4, TIF_SIGPENDING, 5f
@@ -465,6 +445,7 @@ common_exception_return:
 
 	/* Call do_signal() */
 
+	rsil	a2, 0
 	movi	a4, do_notify_resume	# int do_notify_resume(struct pt_regs*)
 	mov	a6, a1
 	callx4	a4
@@ -472,10 +453,24 @@ common_exception_return:
 
 3:	/* Reschedule */
 
+	rsil	a2, 0
 	movi	a4, schedule	# void schedule (void)
 	callx4	a4
 	j	1b
 
+#ifdef CONFIG_PREEMPT
+6:
+	_bbci.l	a4, TIF_NEED_RESCHED, 4f
+
+	/* Check current_thread_info->preempt_count */
+
+	l32i	a4, a2, TI_PRE_COUNT
+	bnez	a4, 4f
+	movi	a4, preempt_schedule_irq
+	callx4	a4
+	j	1b
+#endif
+
 5:
 #ifdef CONFIG_DEBUG_TLB_SANITY
 	l32i	a4, a1, PT_DEPC
@@ -483,7 +478,24 @@ common_exception_return:
 	movi	a4, check_tlb_sanity
 	callx4	a4
 #endif
-4:	/* Restore optional registers. */
+6:
+4:
+#ifdef CONFIG_TRACE_IRQFLAGS
+	l32i	a4, a1, PT_DEPC
+	/* Double exception means we came here with an exception
+	 * while PS.EXCM was set, i.e. interrupts disabled.
+	 */
+	bgeui	a4, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
+	l32i	a4, a1, PT_EXCCAUSE
+	bnei	a4, EXCCAUSE_LEVEL1_INTERRUPT, 1f
+	/* We came here with an interrupt means interrupts were enabled
+	 * and we'll reenable them on return.
+	 */
+	movi	a4, trace_hardirqs_on
+	callx4	a4
+1:
+#endif
+	/* Restore optional registers. */
 
 	load_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT
 
@@ -570,29 +582,6 @@ user_exception_exit:
 
 kernel_exception_exit:
 
-#ifdef PREEMPTIBLE_KERNEL
-
-#ifdef CONFIG_PREEMPT
-
-	/*
-	 * Note: We've just returned from a call4, so we have
-	 * at least 4 addt'l regs.
-	 */
-
-	/* Check current_thread_info->preempt_count */
-
-	GET_THREAD_INFO(a2)
-	l32i	a3, a2, TI_PREEMPT
-	bnez	a3, 1f
-
-	l32i	a2, a2, TI_FLAGS
-
-1:
-
-#endif
-
-#endif
-
 	/* Check if we have to do a movsp.
 	 *
 	 * We only have to do a movsp if the previous window-frame has
@@ -829,176 +818,63 @@ ENDPROC(unrecoverable_exception)
  *
  *  The ALLOCA handler is entered when user code executes the MOVSP
  *  instruction and the caller's frame is not in the register file.
- *  In this case, the caller frame's a0..a3 are on the stack just
- *  below sp (a1), and this handler moves them.
  *
- *  For "MOVSP <ar>,<as>" without destination register a1, this routine
- *  simply moves the value from <as> to <ar> without moving the save area.
+ * This algorithm was taken from the Ross Morley's RTOS Porting Layer:
+ *
+ *    /home/ross/rtos/porting/XtensaRTOS-PortingLayer-20090507/xtensa_vectors.S
+ *
+ * It leverages the existing window spill/fill routines and their support for
+ * double exceptions. The 'movsp' instruction will only cause an exception if
+ * the next window needs to be loaded. In fact this ALLOCA exception may be
+ * replaced at some point by changing the hardware to do a underflow exception
+ * of the proper size instead.
+ *
+ * This algorithm simply backs out the register changes started by the user
+ * excpetion handler, makes it appear that we have started a window underflow
+ * by rotating the window back and then setting the old window base (OWB) in
+ * the 'ps' register with the rolled back window base. The 'movsp' instruction
+ * will be re-executed and this time since the next window frames is in the
+ * active AR registers it won't cause an exception.
+ *
+ * If the WindowUnderflow code gets a TLB miss the page will get mapped
+ * the the partial windeowUnderflow will be handeled in the double exception
+ * handler.
  *
  * Entry condition:
  *
  *   a0:	trashed, original value saved on stack (PT_AREG0)
  *   a1:	a1
  *   a2:	new stack pointer, original in DEPC
- *   a3:	dispatch table
+ *   a3:	a3
  *   depc:	a2, original value saved on stack (PT_DEPC)
- *   excsave_1:	a3
+ *   excsave_1:	dispatch table
  *
  *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
  *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
  */
 
-#if XCHAL_HAVE_BE
-#define _EXTUI_MOVSP_SRC(ar)	extui ar, ar, 4, 4
-#define _EXTUI_MOVSP_DST(ar)	extui ar, ar, 0, 4
-#else
-#define _EXTUI_MOVSP_SRC(ar)	extui ar, ar, 0, 4
-#define _EXTUI_MOVSP_DST(ar)	extui ar, ar, 4, 4
-#endif
-
 ENTRY(fast_alloca)
+	rsr	a0, windowbase
+	rotw	-1
+	rsr	a2, ps
+	extui	a3, a2, PS_OWB_SHIFT, PS_OWB_WIDTH
+	xor	a3, a3, a4
+	l32i	a4, a6, PT_AREG0
+	l32i	a1, a6, PT_DEPC
+	rsr	a6, depc
+	wsr	a1, depc
+	slli	a3, a3, PS_OWB_SHIFT
+	xor	a2, a2, a3
+	wsr	a2, ps
+	rsync
 
-	/* We shouldn't be in a double exception. */
-
-	l32i	a0, a2, PT_DEPC
-	_bgeui	a0, VALID_DOUBLE_EXCEPTION_ADDRESS, .Lunhandled_double
-
-	rsr	a0, depc		# get a2
-	s32i	a4, a2, PT_AREG4	# save a4 and
-	s32i	a0, a2, PT_AREG2	# a2 to stack
-
-	/* Exit critical section. */
-
-	movi	a0, 0
-	s32i	a0, a3, EXC_TABLE_FIXUP
-
-	/* Restore a3, excsave_1 */
-
-	xsr	a3, excsave1		# make sure excsave_1 is valid for dbl.
-	rsr	a4, epc1		# get exception address
-	s32i	a3, a2, PT_AREG3	# save a3 to stack
-
-#ifdef ALLOCA_EXCEPTION_IN_IRAM
-#error	iram not supported
-#else
-	/* Note: l8ui not allowed in IRAM/IROM!! */
-	l8ui	a0, a4, 1		# read as(src) from MOVSP instruction
-#endif
-	movi	a3, .Lmovsp_src
-	_EXTUI_MOVSP_SRC(a0)		# extract source register number
-	addx8	a3, a0, a3
-	jx	a3
-
-.Lunhandled_double:
-	wsr	a0, excsave1
-	movi	a0, unrecoverable_exception
-	callx0	a0
-
-	.align 8
-.Lmovsp_src:
-	l32i	a3, a2, PT_AREG0;	_j 1f;	.align 8
-	mov	a3, a1;			_j 1f;	.align 8
-	l32i	a3, a2, PT_AREG2;	_j 1f;	.align 8
-	l32i	a3, a2, PT_AREG3;	_j 1f;	.align 8
-	l32i	a3, a2, PT_AREG4;	_j 1f;	.align 8
-	mov	a3, a5;			_j 1f;	.align 8
-	mov	a3, a6;			_j 1f;	.align 8
-	mov	a3, a7;			_j 1f;	.align 8
-	mov	a3, a8;			_j 1f;	.align 8
-	mov	a3, a9;			_j 1f;	.align 8
-	mov	a3, a10;		_j 1f;	.align 8
-	mov	a3, a11;		_j 1f;	.align 8
-	mov	a3, a12;		_j 1f;	.align 8
-	mov	a3, a13;		_j 1f;	.align 8
-	mov	a3, a14;		_j 1f;	.align 8
-	mov	a3, a15;		_j 1f;	.align 8
-
-1:
-
-#ifdef ALLOCA_EXCEPTION_IN_IRAM
-#error	iram not supported
-#else
-	l8ui	a0, a4, 0		# read ar(dst) from MOVSP instruction
-#endif
-	addi	a4, a4, 3		# step over movsp
-	_EXTUI_MOVSP_DST(a0)		# extract destination register
-	wsr	a4, epc1		# save new epc_1
-
-	_bnei	a0, 1, 1f		# no 'movsp a1, ax': jump
-
-	/* Move the save area. This implies the use of the L32E
-	 * and S32E instructions, because this move must be done with
-	 * the user's PS.RING privilege levels, not with ring 0
-	 * (kernel's) privileges currently active with PS.EXCM
-	 * set. Note that we have stil registered a fixup routine with the
-	 * double exception vector in case a double exception occurs.
-	 */
-
-	/* a0,a4:avail a1:old user stack a2:exc. stack a3:new user stack. */
-
-	l32e	a0, a1, -16
-	l32e	a4, a1, -12
-	s32e	a0, a3, -16
-	s32e	a4, a3, -12
-	l32e	a0, a1, -8
-	l32e	a4, a1, -4
-	s32e	a0, a3, -8
-	s32e	a4, a3, -4
-
-	/* Restore stack-pointer and all the other saved registers. */
-
-	mov	a1, a3
-
-	l32i	a4, a2, PT_AREG4
-	l32i	a3, a2, PT_AREG3
-	l32i	a0, a2, PT_AREG0
-	l32i	a2, a2, PT_AREG2
-	rfe
-
-	/*  MOVSP <at>,<as>  was invoked with <at> != a1.
-	 *  Because the stack pointer is not being modified,
-	 *  we should be able to just modify the pointer
-	 *  without moving any save area.
-	 *  The processor only traps these occurrences if the
-	 *  caller window isn't live, so unfortunately we can't
-	 *  use this as an alternate trap mechanism.
-	 *  So we just do the move.  This requires that we
-	 *  resolve the destination register, not just the source,
-	 *  so there's some extra work.
-	 *  (PERHAPS NOT REALLY NEEDED, BUT CLEANER...)
-	 */
-
-	/* a0 dst-reg, a1 user-stack, a2 stack, a3 value of src reg. */
-
-1:	movi	a4, .Lmovsp_dst
-	addx8	a4, a0, a4
-	jx	a4
-
-	.align 8
-.Lmovsp_dst:
-	s32i	a3, a2, PT_AREG0;	_j 1f;	.align 8
-	mov	a1, a3;			_j 1f;	.align 8
-	s32i	a3, a2, PT_AREG2;	_j 1f;	.align 8
-	s32i	a3, a2, PT_AREG3;	_j 1f;	.align 8
-	s32i	a3, a2, PT_AREG4;	_j 1f;	.align 8
-	mov	a5, a3;			_j 1f;	.align 8
-	mov	a6, a3;			_j 1f;	.align 8
-	mov	a7, a3;			_j 1f;	.align 8
-	mov	a8, a3;			_j 1f;	.align 8
-	mov	a9, a3;			_j 1f;	.align 8
-	mov	a10, a3;		_j 1f;	.align 8
-	mov	a11, a3;		_j 1f;	.align 8
-	mov	a12, a3;		_j 1f;	.align 8
-	mov	a13, a3;		_j 1f;	.align 8
-	mov	a14, a3;		_j 1f;	.align 8
-	mov	a15, a3;		_j 1f;	.align 8
-
-1:	l32i	a4, a2, PT_AREG4
-	l32i	a3, a2, PT_AREG3
-	l32i	a0, a2, PT_AREG0
-	l32i	a2, a2, PT_AREG2
-	rfe
-
+	_bbci.l	a4, 31, 4f
+	rotw	-1
+	_bbci.l	a8, 30, 8f
+	rotw	-1
+	j	_WindowUnderflow12
+8:	j	_WindowUnderflow8
+4:	j	_WindowUnderflow4
 ENDPROC(fast_alloca)
 
 /*
@@ -1015,9 +891,9 @@ ENDPROC(fast_alloca)
  *   a0:	trashed, original value saved on stack (PT_AREG0)
  *   a1:	a1
  *   a2:	new stack pointer, original in DEPC
- *   a3:	dispatch table
+ *   a3:	a3
  *   depc:	a2, original value saved on stack (PT_DEPC)
- *   excsave_1:	a3
+ *   excsave_1:	dispatch table
  */
 
 ENTRY(fast_syscall_kernel)
@@ -1064,7 +940,6 @@ ENTRY(fast_syscall_unrecoverable)
 
 	l32i    a0, a2, PT_AREG0        # restore a0
 	xsr     a2, depc                # restore a2, depc
-	rsr     a3, excsave1
 
 	wsr     a0, excsave1
 	movi    a0, unrecoverable_exception
@@ -1086,10 +961,10 @@ ENDPROC(fast_syscall_unrecoverable)
  *   a0:	a2 (syscall-nr), original value saved on stack (PT_AREG0)
  *   a1:	a1
  *   a2:	new stack pointer, original in a0 and DEPC
- *   a3:	dispatch table, original in excsave_1
+ *   a3:	a3
  *   a4..a15:	unchanged
  *   depc:	a2, original value saved on stack (PT_DEPC)
- *   excsave_1:	a3
+ *   excsave_1:	dispatch table
  *
  *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
  *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
@@ -1122,8 +997,6 @@ ENDPROC(fast_syscall_unrecoverable)
 
 ENTRY(fast_syscall_xtensa)
 
-	xsr	a3, excsave1		# restore a3, excsave1
-
 	s32i	a7, a2, PT_AREG7	# we need an additional register
 	movi	a7, 4			# sizeof(unsigned int)
 	access_ok a3, a7, a0, a2, .Leac	# a0: scratch reg, a2: sp
@@ -1186,9 +1059,9 @@ ENDPROC(fast_syscall_xtensa)
  *   a0:	trashed, original value saved on stack (PT_AREG0)
  *   a1:	a1
  *   a2:	new stack pointer, original in DEPC
- *   a3:	dispatch table
+ *   a3:	a3
  *   depc:	a2, original value saved on stack (PT_DEPC)
- *   excsave_1:	a3
+ *   excsave_1:	dispatch table
  *
  * Note: We assume the stack pointer is EXC_TABLE_KSTK in the fixup handler.
  */
@@ -1197,15 +1070,16 @@ ENTRY(fast_syscall_spill_registers)
 
 	/* Register a FIXUP handler (pass current wb as a parameter) */
 
+	xsr	a3, excsave1
 	movi	a0, fast_syscall_spill_registers_fixup
 	s32i	a0, a3, EXC_TABLE_FIXUP
 	rsr	a0, windowbase
 	s32i	a0, a3, EXC_TABLE_PARAM
+	xsr	a3, excsave1		# restore a3 and excsave_1
 
-	/* Save a3 and SAR on stack. */
+	/* Save a3, a4 and SAR on stack. */
 
 	rsr	a0, sar
-	xsr	a3, excsave1		# restore a3 and excsave_1
 	s32i	a3, a2, PT_AREG3
 	s32i	a4, a2, PT_AREG4
 	s32i	a0, a2, PT_AREG5	# store SAR to PT_AREG5
@@ -1248,7 +1122,7 @@ ENDPROC(fast_syscall_spill_registers)
  * a3: exctable, original value in excsave1
  */
 
-fast_syscall_spill_registers_fixup:
+ENTRY(fast_syscall_spill_registers_fixup)
 
 	rsr	a2, windowbase	# get current windowbase (a2 is saved)
 	xsr	a0, depc	# restore depc and a0
@@ -1259,23 +1133,27 @@ fast_syscall_spill_registers_fixup:
 	 * in WS, so that the exception handlers save them to the task stack.
 	 */
 
-	rsr	a3, excsave1	# get spill-mask
-	slli	a2, a3, 1	# shift left by one
+	xsr	a3, excsave1	# get spill-mask
+	slli	a3, a3, 1	# shift left by one
 
-	slli	a3, a2, 32-WSBITS
-	src	a2, a2, a3	# a1 = xxwww1yyxxxwww1yy......
+	slli	a2, a3, 32-WSBITS
+	src	a2, a3, a2	# a2 = xxwww1yyxxxwww1yy......
 	wsr	a2, windowstart	# set corrected windowstart
 
-	movi	a3, exc_table
-	l32i	a2, a3, EXC_TABLE_DOUBLE_SAVE	# restore a2
-	l32i	a3, a3, EXC_TABLE_PARAM	# original WB (in user task)
+	srli	a3, a3, 1
+	rsr	a2, excsave1
+	l32i	a2, a2, EXC_TABLE_DOUBLE_SAVE	# restore a2
+	xsr	a2, excsave1
+	s32i	a3, a2, EXC_TABLE_DOUBLE_SAVE	# save a3
+	l32i	a3, a2, EXC_TABLE_PARAM	# original WB (in user task)
+	xsr	a2, excsave1
 
 	/* Return to the original (user task) WINDOWBASE.
 	 * We leave the following frame behind:
 	 * a0, a1, a2	same
-	 * a3:		trashed (saved in excsave_1)
+	 * a3:		trashed (saved in EXC_TABLE_DOUBLE_SAVE)
 	 * depc:	depc (we have to return to that address)
-	 * excsave_1:	a3
+	 * excsave_1:	exctable
 	 */
 
 	wsr	a3, windowbase
@@ -1285,9 +1163,9 @@ fast_syscall_spill_registers_fixup:
 	 *  a0: return address
 	 *  a1: used, stack pointer
 	 *  a2: kernel stack pointer
-	 *  a3: available, saved in EXCSAVE_1
+	 *  a3: available
 	 *  depc: exception address
-	 *  excsave: a3
+	 *  excsave: exctable
 	 * Note: This frame might be the same as above.
 	 */
 
@@ -1303,13 +1181,16 @@ fast_syscall_spill_registers_fixup:
 
 	/* Jump to the exception handler. */
 
-	movi	a3, exc_table
+	rsr	a3, excsave1
 	rsr	a0, exccause
 	addx4	a0, a0, a3              	# find entry in table
 	l32i	a0, a0, EXC_TABLE_FAST_USER     # load handler
+	l32i	a3, a3, EXC_TABLE_DOUBLE_SAVE
 	jx	a0
 
-fast_syscall_spill_registers_fixup_return:
+ENDPROC(fast_syscall_spill_registers_fixup)
+
+ENTRY(fast_syscall_spill_registers_fixup_return)
 
 	/* When we return here, all registers have been restored (a2: DEPC) */
 
@@ -1317,12 +1198,13 @@ fast_syscall_spill_registers_fixup_return:
 
 	/* Restore fixup handler. */
 
-	xsr	a3, excsave1
-	movi	a2, fast_syscall_spill_registers_fixup
-	s32i	a2, a3, EXC_TABLE_FIXUP
-	rsr	a2, windowbase
-	s32i	a2, a3, EXC_TABLE_PARAM
-	l32i	a2, a3, EXC_TABLE_KSTK
+	rsr	a2, excsave1
+	s32i	a3, a2, EXC_TABLE_DOUBLE_SAVE
+	movi	a3, fast_syscall_spill_registers_fixup
+	s32i	a3, a2, EXC_TABLE_FIXUP
+	rsr	a3, windowbase
+	s32i	a3, a2, EXC_TABLE_PARAM
+	l32i	a2, a2, EXC_TABLE_KSTK
 
 	/* Load WB at the time the exception occurred. */
 
@@ -1331,13 +1213,12 @@ fast_syscall_spill_registers_fixup_return:
 	wsr	a3, windowbase
 	rsync
 
-	/* Restore a3 and return. */
-
-	movi	a3, exc_table
-	xsr	a3, excsave1
+	rsr	a3, excsave1
+	l32i	a3, a3, EXC_TABLE_DOUBLE_SAVE
 
 	rfde
 
+ENDPROC(fast_syscall_spill_registers_fixup_return)
 
 /*
  * spill all registers.
@@ -1522,9 +1403,8 @@ ENTRY(_spill_registers)
 
 	movi	a0, 0
 
-	movi	a3, exc_table
+	rsr	a3, excsave1
 	l32i	a1, a3, EXC_TABLE_KSTK
-	wsr	a3, excsave1
 
 	movi	a4, (1 << PS_WOE_BIT) | LOCKLEVEL
 	wsr	a4, ps
@@ -1568,9 +1448,9 @@ ENDPROC(fast_second_level_miss_double_kernel)
  *   a0:	trashed, original value saved on stack (PT_AREG0)
  *   a1:	a1
  *   a2:	new stack pointer, original in DEPC
- *   a3:	dispatch table
+ *   a3:	a3
  *   depc:	a2, original value saved on stack (PT_DEPC)
- *   excsave_1:	a3
+ *   excsave_1:	dispatch table
  *
  *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
  *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
@@ -1578,9 +1458,10 @@ ENDPROC(fast_second_level_miss_double_kernel)
 
 ENTRY(fast_second_level_miss)
 
-	/* Save a1. Note: we don't expect a double exception. */
+	/* Save a1 and a3. Note: we don't expect a double exception. */
 
 	s32i	a1, a2, PT_AREG1
+	s32i	a3, a2, PT_AREG3
 
 	/* We need to map the page of PTEs for the user task.  Find
 	 * the pointer to that page.  Also, it's possible for tsk->mm
@@ -1602,9 +1483,6 @@ ENTRY(fast_second_level_miss)
 	l32i	a0, a1, TASK_MM		# tsk->mm
 	beqz	a0, 9f
 
-
-	/* We deliberately destroy a3 that holds the exception table. */
-
 8:	rsr	a3, excvaddr		# fault address
 	_PGD_OFFSET(a0, a3, a1)
 	l32i	a0, a0, 0		# read pmdval
@@ -1655,7 +1533,7 @@ ENTRY(fast_second_level_miss)
 
 	/* Exit critical section. */
 
-4:	movi	a3, exc_table		# restore a3
+4:	rsr	a3, excsave1
 	movi	a0, 0
 	s32i	a0, a3, EXC_TABLE_FIXUP
 
@@ -1663,8 +1541,8 @@ ENTRY(fast_second_level_miss)
 
 	l32i	a0, a2, PT_AREG0
 	l32i	a1, a2, PT_AREG1
+	l32i	a3, a2, PT_AREG3
 	l32i	a2, a2, PT_DEPC
-	xsr	a3, excsave1
 
 	bgeui	a2, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
 
@@ -1751,11 +1629,8 @@ ENTRY(fast_second_level_miss)
 
 2:	/* Invalid PGD, default exception handling */
 
-	movi	a3, exc_table
 	rsr	a1, depc
-	xsr	a3, excsave1
 	s32i	a1, a2, PT_AREG2
-	s32i	a3, a2, PT_AREG3
 	mov	a1, a2
 
 	rsr	a2, ps
@@ -1775,9 +1650,9 @@ ENDPROC(fast_second_level_miss)
  *   a0:	trashed, original value saved on stack (PT_AREG0)
  *   a1:	a1
  *   a2:	new stack pointer, original in DEPC
- *   a3:	dispatch table
+ *   a3:	a3
  *   depc:	a2, original value saved on stack (PT_DEPC)
- *   excsave_1:	a3
+ *   excsave_1:	dispatch table
  *
  *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
  *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
@@ -1785,17 +1660,17 @@ ENDPROC(fast_second_level_miss)
 
 ENTRY(fast_store_prohibited)
 
-	/* Save a1 and a4. */
+	/* Save a1 and a3. */
 
 	s32i	a1, a2, PT_AREG1
-	s32i	a4, a2, PT_AREG4
+	s32i	a3, a2, PT_AREG3
 
 	GET_CURRENT(a1,a2)
 	l32i	a0, a1, TASK_MM		# tsk->mm
 	beqz	a0, 9f
 
 8:	rsr	a1, excvaddr		# fault address
-	_PGD_OFFSET(a0, a1, a4)
+	_PGD_OFFSET(a0, a1, a3)
 	l32i	a0, a0, 0
 	beqz	a0, 2f
 
@@ -1804,39 +1679,37 @@ ENTRY(fast_store_prohibited)
 	 * and is not PAGE_NONE. See pgtable.h for possible PTE layouts.
 	 */
 
-	_PTE_OFFSET(a0, a1, a4)
-	l32i	a4, a0, 0		# read pteval
+	_PTE_OFFSET(a0, a1, a3)
+	l32i	a3, a0, 0		# read pteval
 	movi	a1, _PAGE_CA_INVALID
-	ball	a4, a1, 2f
-	bbci.l	a4, _PAGE_WRITABLE_BIT, 2f
+	ball	a3, a1, 2f
+	bbci.l	a3, _PAGE_WRITABLE_BIT, 2f
 
 	movi	a1, _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_HW_WRITE
-	or	a4, a4, a1
+	or	a3, a3, a1
 	rsr	a1, excvaddr
-	s32i	a4, a0, 0
+	s32i	a3, a0, 0
 
 	/* We need to flush the cache if we have page coloring. */
 #if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK
 	dhwb	a0, 0
 #endif
 	pdtlb	a0, a1
-	wdtlb	a4, a0
+	wdtlb	a3, a0
 
 	/* Exit critical section. */
 
 	movi	a0, 0
+	rsr	a3, excsave1
 	s32i	a0, a3, EXC_TABLE_FIXUP
 
 	/* Restore the working registers, and return. */
 
-	l32i	a4, a2, PT_AREG4
+	l32i	a3, a2, PT_AREG3
 	l32i	a1, a2, PT_AREG1
 	l32i	a0, a2, PT_AREG0
 	l32i	a2, a2, PT_DEPC
 
-	/* Restore excsave1 and a3. */
-
-	xsr	a3, excsave1
 	bgeui	a2, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
 
 	rsr	a2, depc
@@ -1853,11 +1726,8 @@ ENTRY(fast_store_prohibited)
 
 2:	/* If there was a problem, handle fault in C */
 
-	rsr	a4, depc	# still holds a2
-	xsr	a3, excsave1
-	s32i	a4, a2, PT_AREG2
-	s32i	a3, a2, PT_AREG3
-	l32i	a4, a2, PT_AREG4
+	rsr	a3, depc	# still holds a2
+	s32i	a3, a2, PT_AREG2
 	mov	a1, a2
 
 	rsr	a2, ps
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 42a8bba..946fb8d 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -170,8 +170,7 @@ static int __init parse_tag_fdt(const bp_tag_t *tag)
 
 __tagtable(BP_TAG_FDT, parse_tag_fdt);
 
-void __init early_init_dt_setup_initrd_arch(unsigned long start,
-		unsigned long end)
+void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
 {
 	initrd_start = (void *)__va(start);
 	initrd_end = (void *)__va(end);
@@ -585,8 +584,8 @@ c_show(struct seq_file *f, void *slot)
 		     "bogomips\t: %lu.%02lu\n",
 		     XCHAL_BUILD_UNIQUE_ID,
 		     XCHAL_HAVE_BE ?  "big" : "little",
-		     CCOUNT_PER_JIFFY/(1000000/HZ),
-		     (CCOUNT_PER_JIFFY/(10000/HZ)) % 100,
+		     ccount_freq/1000000,
+		     (ccount_freq/10000) % 100,
 		     loops_per_jiffy/(500000/HZ),
 		     (loops_per_jiffy/(5000/HZ)) % 100);
 
diff --git a/arch/xtensa/kernel/signal.c b/arch/xtensa/kernel/signal.c
index 718eca1..98b67d5 100644
--- a/arch/xtensa/kernel/signal.c
+++ b/arch/xtensa/kernel/signal.c
@@ -341,7 +341,7 @@ static int setup_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 
 	sp = regs->areg[1];
 
-	if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! on_sig_stack(sp)) {
+	if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && sas_ss_flags(sp) == 0) {
 		sp = current->sas_ss_sp + current->sas_ss_size;
 	}
 
diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c
index 24bb0c17..9af3dd8 100644
--- a/arch/xtensa/kernel/time.c
+++ b/arch/xtensa/kernel/time.c
@@ -29,9 +29,7 @@
 #include <asm/timex.h>
 #include <asm/platform.h>
 
-#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
 unsigned long ccount_freq;		/* ccount Hz */
-#endif
 
 static cycle_t ccount_read(struct clocksource *cs)
 {
@@ -129,8 +127,10 @@ void __init time_init(void)
 	platform_calibrate_ccount();
 	printk("%d.%02d MHz\n", (int)ccount_freq/1000000,
 			(int)(ccount_freq/10000)%100);
+#else
+	ccount_freq = CONFIG_XTENSA_CPU_CLOCK*1000000UL;
 #endif
-	clocksource_register_hz(&ccount_clocksource, CCOUNT_PER_JIFFY * HZ);
+	clocksource_register_hz(&ccount_clocksource, ccount_freq);
 
 	ccount_timer.evt.cpumask = cpumask_of(0);
 	ccount_timer.evt.irq = irq_create_mapping(NULL, LINUX_TIMER_INT);
@@ -164,7 +164,7 @@ irqreturn_t timer_interrupt (int irq, void *dev_id)
 #ifndef CONFIG_GENERIC_CALIBRATE_DELAY
 void calibrate_delay(void)
 {
-	loops_per_jiffy = CCOUNT_PER_JIFFY;
+	loops_per_jiffy = ccount_freq / HZ;
 	printk("Calibrating delay loop (skipped)... "
 	       "%lu.%02lu BogoMIPS preset\n",
 	       loops_per_jiffy/(1000000/HZ),
diff --git a/arch/xtensa/kernel/vectors.S b/arch/xtensa/kernel/vectors.S
index f9e1753..cb8fd44 100644
--- a/arch/xtensa/kernel/vectors.S
+++ b/arch/xtensa/kernel/vectors.S
@@ -78,6 +78,7 @@ ENTRY(_UserExceptionVector)
 	s32i	a0, a2, PT_DEPC		# mark it as a regular exception
 	addx4	a0, a0, a3		# find entry in table
 	l32i	a0, a0, EXC_TABLE_FAST_USER	# load handler
+	xsr	a3, excsave1		# restore a3 and dispatch table
 	jx	a0
 
 ENDPROC(_UserExceptionVector)
@@ -104,6 +105,7 @@ ENTRY(_KernelExceptionVector)
 	s32i	a0, a2, PT_DEPC		# mark it as a regular exception
 	addx4	a0, a0, a3		# find entry in table
 	l32i	a0, a0, EXC_TABLE_FAST_KERNEL	# load handler address
+	xsr	a3, excsave1		# restore a3 and dispatch table
 	jx	a0
 
 ENDPROC(_KernelExceptionVector)
@@ -168,7 +170,7 @@ ENDPROC(_KernelExceptionVector)
  *
  *	a0:	   DEPC
  *	a1: 	   a1
- *	a2:	   trashed, original value in EXC_TABLE_DOUBLE_A2
+ *	a2:	   trashed, original value in EXC_TABLE_DOUBLE_SAVE
  *	a3:	   exctable
  *	depc:	   a0
  *	excsave_1: a3
@@ -204,47 +206,46 @@ ENDPROC(_KernelExceptionVector)
 
 	.section .DoubleExceptionVector.text, "ax"
 	.begin literal_prefix .DoubleExceptionVector
+	.globl _DoubleExceptionVector_WindowUnderflow
+	.globl _DoubleExceptionVector_WindowOverflow
 
 ENTRY(_DoubleExceptionVector)
 
-	/* Deliberately destroy excsave (don't assume it's value was valid). */
-
-	wsr	a3, excsave1		# save a3
+	xsr	a3, excsave1
+	s32i	a2, a3, EXC_TABLE_DOUBLE_SAVE
 
 	/* Check for kernel double exception (usually fatal). */
 
-	rsr	a3, ps
-	_bbci.l	a3, PS_UM_BIT, .Lksp
+	rsr	a2, ps
+	_bbci.l	a2, PS_UM_BIT, .Lksp
 
 	/* Check if we are currently handling a window exception. */
 	/* Note: We don't need to indicate that we enter a critical section. */
 
 	xsr	a0, depc		# get DEPC, save a0
 
-	movi	a3, WINDOW_VECTORS_VADDR
-	_bltu	a0, a3, .Lfixup
-	addi	a3, a3, WINDOW_VECTORS_SIZE
-	_bgeu	a0, a3, .Lfixup
+	movi	a2, WINDOW_VECTORS_VADDR
+	_bltu	a0, a2, .Lfixup
+	addi	a2, a2, WINDOW_VECTORS_SIZE
+	_bgeu	a0, a2, .Lfixup
 
 	/* Window overflow/underflow exception. Get stack pointer. */
 
-	mov	a3, a2
-	/* This explicit literal and the following references to it are made
-	 * in order to fit DoubleExceptionVector.literals into the available
-	 * 16-byte gap before DoubleExceptionVector.text in the absence of
-	 * link time relaxation. See kernel/vmlinux.lds.S
-	 */
-	.literal .Lexc_table, exc_table
-	l32r	a2, .Lexc_table
-	l32i	a2, a2, EXC_TABLE_KSTK
+	l32i	a2, a3, EXC_TABLE_KSTK
 
 	/* Check for overflow/underflow exception, jump if overflow. */
 
-	_bbci.l	a0, 6, .Lovfl
-
-	/* a0: depc, a1: a1, a2: kstk, a3: a2, depc: a0, excsave: a3  */
+	_bbci.l	a0, 6, _DoubleExceptionVector_WindowOverflow
 
-	/* Restart window underflow exception.
+	/*
+	 * Restart window underflow exception.
+	 * Currently:
+	 *	depc = orig a0,
+	 *	a0 = orig DEPC,
+	 *	a2 = new sp based on KSTK from exc_table
+	 *	a3 = excsave_1
+	 *	excsave_1 = orig a3
+	 *
 	 * We return to the instruction in user space that caused the window
 	 * underflow exception. Therefore, we change window base to the value
 	 * before we entered the window underflow exception and prepare the
@@ -252,10 +253,11 @@ ENTRY(_DoubleExceptionVector)
 	 * by changing depc (in a0).
 	 * Note: We can trash the current window frame (a0...a3) and depc!
 	 */
-
+_DoubleExceptionVector_WindowUnderflow:
+	xsr	a3, excsave1
 	wsr	a2, depc		# save stack pointer temporarily
 	rsr	a0, ps
-	extui	a0, a0, PS_OWB_SHIFT, 4
+	extui	a0, a0, PS_OWB_SHIFT, PS_OWB_WIDTH
 	wsr	a0, windowbase
 	rsync
 
@@ -263,28 +265,57 @@ ENTRY(_DoubleExceptionVector)
 
 	xsr	a2, depc		# save a2 and get stack pointer
 	s32i	a0, a2, PT_AREG0
-
-	wsr	a3, excsave1		# save a3
-	l32r	a3, .Lexc_table
-
+	xsr	a3, excsave1
 	rsr	a0, exccause
 	s32i	a0, a2, PT_DEPC		# mark it as a regular exception
 	addx4	a0, a0, a3
+	xsr	a3, excsave1
 	l32i	a0, a0, EXC_TABLE_FAST_USER
 	jx	a0
 
-.Lfixup:/* Check for a fixup handler or if we were in a critical section. */
+	/*
+	 * We only allow the ITLB miss exception if we are in kernel space.
+	 * All other exceptions are unexpected and thus unrecoverable!
+	 */
+
+#ifdef CONFIG_MMU
+	.extern fast_second_level_miss_double_kernel
+
+.Lksp:	/* a0: a0, a1: a1, a2: a2, a3: trashed, depc: depc, excsave: a3 */
+
+	rsr	a3, exccause
+	beqi	a3, EXCCAUSE_ITLB_MISS, 1f
+	addi	a3, a3, -EXCCAUSE_DTLB_MISS
+	bnez	a3, .Lunrecoverable
+1:	movi	a3, fast_second_level_miss_double_kernel
+	jx	a3
+#else
+.equ	.Lksp,	.Lunrecoverable
+#endif
+
+	/* Critical! We can't handle this situation. PANIC! */
 
-	/* a0: depc, a1: a1, a2: a2, a3: trashed, depc: a0, excsave1: a3 */
+	.extern unrecoverable_exception
 
-	l32r	a3, .Lexc_table
-	s32i	a2, a3, EXC_TABLE_DOUBLE_SAVE	# temporary variable
+.Lunrecoverable_fixup:
+	l32i	a2, a3, EXC_TABLE_DOUBLE_SAVE
+	xsr	a0, depc
+
+.Lunrecoverable:
+	rsr	a3, excsave1
+	wsr	a0, excsave1
+	movi	a0, unrecoverable_exception
+	callx0	a0
+
+.Lfixup:/* Check for a fixup handler or if we were in a critical section. */
+
+	/* a0: depc, a1: a1, a2: trash, a3: exctable, depc: a0, excsave1: a3 */
 
 	/* Enter critical section. */
 
 	l32i	a2, a3, EXC_TABLE_FIXUP
 	s32i	a3, a3, EXC_TABLE_FIXUP
-	beq	a2, a3, .Lunrecoverable_fixup	# critical!
+	beq	a2, a3, .Lunrecoverable_fixup	# critical section
 	beqz	a2, .Ldflt			# no handler was registered
 
 	/* a0: depc, a1: a1, a2: trash, a3: exctable, depc: a0, excsave: a3 */
@@ -293,58 +324,145 @@ ENTRY(_DoubleExceptionVector)
 
 .Ldflt:	/* Get stack pointer. */
 
-	l32i	a3, a3, EXC_TABLE_DOUBLE_SAVE
-	addi	a2, a3, -PT_USER_SIZE
-
-.Lovfl:	/* Jump to default handlers. */
+	l32i	a2, a3, EXC_TABLE_DOUBLE_SAVE
+	addi	a2, a2, -PT_USER_SIZE
 
-	/* a0: depc, a1: a1, a2: kstk, a3: a2, depc: a0, excsave: a3 */
+	/* a0: depc, a1: a1, a2: kstk, a3: exctable, depc: a0, excsave: a3 */
 
-	xsr	a3, depc
 	s32i	a0, a2, PT_DEPC
-	s32i	a3, a2, PT_AREG0
+	l32i	a0, a3, EXC_TABLE_DOUBLE_SAVE
+	xsr	a0, depc
+	s32i	a0, a2, PT_AREG0
 
-	/* a0: avail, a1: a1, a2: kstk, a3: avail, depc: a2, excsave: a3 */
+	/* a0: avail, a1: a1, a2: kstk, a3: exctable, depc: a2, excsave: a3 */
 
-	l32r	a3, .Lexc_table
 	rsr	a0, exccause
 	addx4	a0, a0, a3
+	xsr	a3, excsave1
 	l32i	a0, a0, EXC_TABLE_FAST_USER
 	jx	a0
 
 	/*
-	 * We only allow the ITLB miss exception if we are in kernel space.
-	 * All other exceptions are unexpected and thus unrecoverable!
+	 * Restart window OVERFLOW exception.
+	 * Currently:
+	 *	depc = orig a0,
+	 *	a0 = orig DEPC,
+	 *	a2 = new sp based on KSTK from exc_table
+	 *	a3 = EXCSAVE_1
+	 *	excsave_1 = orig a3
+	 *
+	 * We return to the instruction in user space that caused the window
+	 * overflow exception. Therefore, we change window base to the value
+	 * before we entered the window overflow exception and prepare the
+	 * registers to return as if we were coming from a regular exception
+	 * by changing DEPC (in a0).
+	 *
+	 * NOTE: We CANNOT trash the current window frame (a0...a3), but we
+	 * can clobber depc.
+	 *
+	 * The tricky part here is that overflow8 and overflow12 handlers
+	 * save a0, then clobber a0.  To restart the handler, we have to restore
+	 * a0 if the double exception was past the point where a0 was clobbered.
+	 *
+	 * To keep things simple, we take advantage of the fact all overflow
+	 * handlers save a0 in their very first instruction.  If DEPC was past
+	 * that instruction, we can safely restore a0 from where it was saved
+	 * on the stack.
+	 *
+	 * a0: depc, a1: a1, a2: kstk, a3: exc_table, depc: a0, excsave1: a3
 	 */
+_DoubleExceptionVector_WindowOverflow:
+	extui	a2, a0, 0, 6	# get offset into 64-byte vector handler
+	beqz	a2, 1f		# if at start of vector, don't restore
 
-#ifdef CONFIG_MMU
-	.extern fast_second_level_miss_double_kernel
+	addi	a0, a0, -128
+	bbsi	a0, 8, 1f	# don't restore except for overflow 8 and 12
+	bbsi	a0, 7, 2f
 
-.Lksp:	/* a0: a0, a1: a1, a2: a2, a3: trashed, depc: depc, excsave: a3 */
+	/*
+	 * Restore a0 as saved by _WindowOverflow8().
+	 *
+	 * FIXME:  we really need a fixup handler for this L32E,
+	 * for the extremely unlikely case where the overflow handler's
+	 * reference thru a0 gets a hardware TLB refill that bumps out
+	 * the (distinct, aliasing) TLB entry that mapped its prior
+	 * references thru a9, and where our reference now thru a9
+	 * gets a 2nd-level miss exception (not hardware TLB refill).
+	 */
 
-	rsr	a3, exccause
-	beqi	a3, EXCCAUSE_ITLB_MISS, 1f
-	addi	a3, a3, -EXCCAUSE_DTLB_MISS
-	bnez	a3, .Lunrecoverable
-1:	movi	a3, fast_second_level_miss_double_kernel
-	jx	a3
-#else
-.equ	.Lksp,	.Lunrecoverable
-#endif
+	l32e	a2, a9, -16
+	wsr	a2, depc	# replace the saved a0
+	j	1f
 
-	/* Critical! We can't handle this situation. PANIC! */
+2:
+	/*
+	 * Restore a0 as saved by _WindowOverflow12().
+	 *
+	 * FIXME:  we really need a fixup handler for this L32E,
+	 * for the extremely unlikely case where the overflow handler's
+	 * reference thru a0 gets a hardware TLB refill that bumps out
+	 * the (distinct, aliasing) TLB entry that mapped its prior
+	 * references thru a13, and where our reference now thru a13
+	 * gets a 2nd-level miss exception (not hardware TLB refill).
+	 */
 
-	.extern unrecoverable_exception
+	l32e	a2, a13, -16
+	wsr	a2, depc	# replace the saved a0
+1:
+	/*
+	 * Restore WindowBase while leaving all address registers restored.
+	 * We have to use ROTW for this, because WSR.WINDOWBASE requires
+	 * an address register (which would prevent restore).
+	 *
+	 * Window Base goes from 0 ... 7 (Module 8)
+	 * Window Start is 8 bits; Ex: (0b1010 1010):0x55 from series of call4s
+	 */
+
+	rsr	a0, ps
+	extui	a0, a0, PS_OWB_SHIFT, PS_OWB_WIDTH
+	rsr	a2, windowbase
+	sub	a0, a2, a0
+	extui	a0, a0, 0, 3
 
-.Lunrecoverable_fixup:
 	l32i	a2, a3, EXC_TABLE_DOUBLE_SAVE
-	xsr	a0, depc
+	xsr	a3, excsave1
+	beqi	a0, 1, .L1pane
+	beqi	a0, 3, .L3pane
 
-.Lunrecoverable:
-	rsr	a3, excsave1
-	wsr	a0, excsave1
-	movi	a0, unrecoverable_exception
-	callx0	a0
+	rsr	a0, depc
+	rotw	-2
+
+	/*
+	 * We are now in the user code's original window frame.
+	 * Process the exception as a user exception as if it was
+	 * taken by the user code.
+	 *
+	 * This is similar to the user exception vector,
+	 * except that PT_DEPC isn't set to EXCCAUSE.
+	 */
+1:
+	xsr	a3, excsave1
+	wsr	a2, depc
+	l32i	a2, a3, EXC_TABLE_KSTK
+	s32i	a0, a2, PT_AREG0
+	rsr	a0, exccause
+
+	s32i	a0, a2, PT_DEPC
+
+	addx4	a0, a0, a3
+	l32i	a0, a0, EXC_TABLE_FAST_USER
+	xsr	a3, excsave1
+	jx	a0
+
+.L1pane:
+	rsr	a0, depc
+	rotw	-1
+	j	1b
+
+.L3pane:
+	rsr	a0, depc
+	rotw	-3
+	j	1b
 
 	.end literal_prefix
 
diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c
index d8507f8..74a60c7 100644
--- a/arch/xtensa/kernel/xtensa_ksyms.c
+++ b/arch/xtensa/kernel/xtensa_ksyms.c
@@ -25,6 +25,7 @@
 #include <asm/io.h>
 #include <asm/page.h>
 #include <asm/pgalloc.h>
+#include <asm/ftrace.h>
 #ifdef CONFIG_BLK_DEV_FD
 #include <asm/floppy.h>
 #endif
diff --git a/arch/xtensa/mm/fault.c b/arch/xtensa/mm/fault.c
index 4b7bc8d..70fa7bc 100644
--- a/arch/xtensa/mm/fault.c
+++ b/arch/xtensa/mm/fault.c
@@ -72,6 +72,8 @@ void do_page_fault(struct pt_regs *regs)
 	       address, exccause, regs->pc, is_write? "w":"", is_exec? "x":"");
 #endif
 
+	if (user_mode(regs))
+		flags |= FAULT_FLAG_USER;
 retry:
 	down_read(&mm->mmap_sem);
 	vma = find_vma(mm, address);
diff --git a/arch/xtensa/platforms/iss/network.c b/arch/xtensa/platforms/iss/network.c
index 56f88b7..e9e1aad 100644
--- a/arch/xtensa/platforms/iss/network.c
+++ b/arch/xtensa/platforms/iss/network.c
@@ -737,7 +737,8 @@ static int __init iss_net_setup(char *str)
 		return 1;
 	}
 
-	if ((new = alloc_bootmem(sizeof new)) == NULL) {
+	new = alloc_bootmem(sizeof(*new));
+	if (new == NULL) {
 		printk("Alloc_bootmem failed\n");
 		return 1;
 	}