diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/mips/Kconfig | 12 | ||||
| -rw-r--r-- | arch/mips/alchemy/Kconfig | 1 | ||||
| -rw-r--r-- | arch/mips/kernel/irq-msc01.c | 6 | ||||
| -rw-r--r-- | arch/mips/kernel/irq_cpu.c | 3 | ||||
| -rw-r--r-- | arch/mips/sgi-ip32/ip32-irq.c | 63 | ||||
| -rw-r--r-- | arch/mips/sibyte/bcm1480/irq.c | 2 | ||||
| -rw-r--r-- | arch/mips/sibyte/sb1250/irq.c | 2 | ||||
| -rw-r--r-- | arch/mips/sni/a20r.c | 2 | ||||
| -rw-r--r-- | arch/mips/sni/pcimt.c | 2 | ||||
| -rw-r--r-- | arch/mips/sni/pcit.c | 4 | ||||
| -rw-r--r-- | arch/mips/sni/rm200.c | 2 | ||||
| -rw-r--r-- | arch/mips/txx9/Kconfig | 1 |
12 files changed, 59 insertions, 41 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 206cb79..dc78719 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -77,7 +77,6 @@ config MIPS_COBALT select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN - select GENERIC_HARDIRQS_NO__DO_IRQ config MACH_DECSTATION bool "DECstations" @@ -132,7 +131,6 @@ config MACH_JAZZ select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL select SYS_SUPPORTS_100HZ - select GENERIC_HARDIRQS_NO__DO_IRQ help This a family of machines based on the MIPS R4030 chipset which was used by several vendors to build RISC/os and Windows NT workstations. @@ -154,7 +152,6 @@ config LASAT select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL if BROKEN select SYS_SUPPORTS_LITTLE_ENDIAN - select GENERIC_HARDIRQS_NO__DO_IRQ config LEMOTE_FULONG bool "Lemote Fulong mini-PC" @@ -175,7 +172,6 @@ config LEMOTE_FULONG select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_HIGHMEM select SYS_HAS_EARLY_PRINTK - select GENERIC_HARDIRQS_NO__DO_IRQ select GENERIC_ISA_DMA_SUPPORT_BROKEN select CPU_HAS_WB help @@ -250,7 +246,6 @@ config MACH_VR41XX select CEVT_R4K select CSRC_R4K select SYS_HAS_CPU_VR41XX - select GENERIC_HARDIRQS_NO__DO_IRQ config NXP_STB220 bool "NXP STB220 board" @@ -364,7 +359,6 @@ config SGI_IP27 select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_NUMA select SYS_SUPPORTS_SMP - select GENERIC_HARDIRQS_NO__DO_IRQ help This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics workstations. To compile a Linux kernel that runs on these, say Y @@ -563,7 +557,6 @@ config MIKROTIK_RB532 select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT - select GENERIC_HARDIRQS_NO__DO_IRQ select HW_HAS_PCI select IRQ_CPU select SYS_HAS_CPU_MIPS32_R1 @@ -700,8 +693,7 @@ config SCHED_OMIT_FRAME_POINTER default y config GENERIC_HARDIRQS_NO__DO_IRQ - bool - default n + def_bool y # # Select some configuration options automatically based on user selections. @@ -920,7 +912,6 @@ config SOC_PNX833X select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_BIG_ENDIAN - select GENERIC_HARDIRQS_NO__DO_IRQ select GENERIC_GPIO select CPU_MIPSR2_IRQ_VI @@ -939,7 +930,6 @@ config SOC_PNX8550 select SYS_HAS_CPU_MIPS32_R1 select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL - select GENERIC_HARDIRQS_NO__DO_IRQ select GENERIC_GPIO config SWAP_IO_SPACE diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig index 2fc5c13..8128aeb 100644 --- a/arch/mips/alchemy/Kconfig +++ b/arch/mips/alchemy/Kconfig @@ -134,5 +134,4 @@ config SOC_AU1X00 select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_APM_EMULATION - select GENERIC_HARDIRQS_NO__DO_IRQ select ARCH_REQUIRE_GPIOLIB diff --git a/arch/mips/kernel/irq-msc01.c b/arch/mips/kernel/irq-msc01.c index 963c16d..6a8cd28 100644 --- a/arch/mips/kernel/irq-msc01.c +++ b/arch/mips/kernel/irq-msc01.c @@ -140,14 +140,16 @@ void __init init_msc_irqs(unsigned long icubase, unsigned int irqbase, msc_irqma switch (imp->im_type) { case MSC01_IRQ_EDGE: - set_irq_chip(irqbase+n, &msc_edgeirq_type); + set_irq_chip_and_handler_name(irqbase + n, + &msc_edgeirq_type, handle_edge_irq, "edge"); if (cpu_has_veic) MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT); else MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT | imp->im_lvl); break; case MSC01_IRQ_LEVEL: - set_irq_chip(irqbase+n, &msc_levelirq_type); + set_irq_chip_and_handler_name(irqbase+n, + &msc_levelirq_type, handle_level_irq, "level"); if (cpu_has_veic) MSCIC_WRITE(MSC01_IC_SUP+n*8, 0); else diff --git a/arch/mips/kernel/irq_cpu.c b/arch/mips/kernel/irq_cpu.c index 0ee2567..55c8a3c 100644 --- a/arch/mips/kernel/irq_cpu.c +++ b/arch/mips/kernel/irq_cpu.c @@ -112,7 +112,8 @@ void __init mips_cpu_irq_init(void) */ if (cpu_has_mipsmt) for (i = irq_base; i < irq_base + 2; i++) - set_irq_chip(i, &mips_mt_cpu_irq_controller); + set_irq_chip_and_handler(i, &mips_mt_cpu_irq_controller, + handle_percpu_irq); for (i = irq_base + 2; i < irq_base + 8; i++) set_irq_chip_and_handler(i, &mips_cpu_irq_controller, diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c index 0d6b666..0aefc53 100644 --- a/arch/mips/sgi-ip32/ip32-irq.c +++ b/arch/mips/sgi-ip32/ip32-irq.c @@ -325,16 +325,11 @@ static void mask_and_ack_maceisa_irq(unsigned int irq) { unsigned long mace_int; - switch (irq) { - case MACEISA_PARALLEL_IRQ: - case MACEISA_SERIAL1_TDMAPR_IRQ: - case MACEISA_SERIAL2_TDMAPR_IRQ: - /* edge triggered */ - mace_int = mace->perif.ctrl.istat; - mace_int &= ~(1 << (irq - MACEISA_AUDIO_SW_IRQ)); - mace->perif.ctrl.istat = mace_int; - break; - } + /* edge triggered */ + mace_int = mace->perif.ctrl.istat; + mace_int &= ~(1 << (irq - MACEISA_AUDIO_SW_IRQ)); + mace->perif.ctrl.istat = mace_int; + disable_maceisa_irq(irq); } @@ -344,7 +339,16 @@ static void end_maceisa_irq(unsigned irq) enable_maceisa_irq(irq); } -static struct irq_chip ip32_maceisa_interrupt = { +static struct irq_chip ip32_maceisa_level_interrupt = { + .name = "IP32 MACE ISA", + .ack = disable_maceisa_irq, + .mask = disable_maceisa_irq, + .mask_ack = disable_maceisa_irq, + .unmask = enable_maceisa_irq, + .end = end_maceisa_irq, +}; + +static struct irq_chip ip32_maceisa_edge_interrupt = { .name = "IP32 MACE ISA", .ack = mask_and_ack_maceisa_irq, .mask = disable_maceisa_irq, @@ -500,27 +504,50 @@ void __init arch_init_irq(void) for (irq = CRIME_IRQ_BASE; irq <= IP32_IRQ_MAX; irq++) { switch (irq) { case MACE_VID_IN1_IRQ ... MACE_PCI_BRIDGE_IRQ: - set_irq_chip(irq, &ip32_mace_interrupt); + set_irq_chip_and_handler_name(irq,&ip32_mace_interrupt, + handle_level_irq, "level"); break; + case MACEPCI_SCSI0_IRQ ... MACEPCI_SHARED2_IRQ: - set_irq_chip(irq, &ip32_macepci_interrupt); + set_irq_chip_and_handler_name(irq, + &ip32_macepci_interrupt, handle_level_irq, + "level"); break; + case CRIME_GBE0_IRQ ... CRIME_GBE3_IRQ: - set_irq_chip(irq, &crime_edge_interrupt); + set_irq_chip_and_handler_name(irq, + &crime_edge_interrupt, handle_edge_irq, "edge"); break; case CRIME_CPUERR_IRQ: case CRIME_MEMERR_IRQ: - set_irq_chip(irq, &crime_level_interrupt); + set_irq_chip_and_handler_name(irq, + &crime_level_interrupt, handle_level_irq, + "level"); break; + case CRIME_RE_EMPTY_E_IRQ ... CRIME_RE_IDLE_E_IRQ: case CRIME_SOFT0_IRQ ... CRIME_SOFT2_IRQ: - set_irq_chip(irq, &crime_edge_interrupt); + set_irq_chip_and_handler_name(irq, + &crime_edge_interrupt, handle_edge_irq, "edge"); break; + case CRIME_VICE_IRQ: - set_irq_chip(irq, &crime_edge_interrupt); + set_irq_chip_and_handler_name(irq, + &crime_edge_interrupt, handle_edge_irq, "edge"); + break; + + case MACEISA_PARALLEL_IRQ: + case MACEISA_SERIAL1_TDMAPR_IRQ: + case MACEISA_SERIAL2_TDMAPR_IRQ: + set_irq_chip_and_handler_name(irq, + &ip32_maceisa_edge_interrupt, handle_edge_irq, + "edge"); break; + default: - set_irq_chip(irq, &ip32_maceisa_interrupt); + set_irq_chip_and_handler_name(irq, + &ip32_maceisa_level_interrupt, handle_level_irq, + "level"); break; } } diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c index 12b465d..352352b 100644 --- a/arch/mips/sibyte/bcm1480/irq.c +++ b/arch/mips/sibyte/bcm1480/irq.c @@ -236,7 +236,7 @@ void __init init_bcm1480_irqs(void) int i; for (i = 0; i < BCM1480_NR_IRQS; i++) { - set_irq_chip(i, &bcm1480_irq_type); + set_irq_chip_and_handler(i, &bcm1480_irq_type, handle_level_irq); bcm1480_irq_owner[i] = 0; } } diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c index 808ac29..c08ff58 100644 --- a/arch/mips/sibyte/sb1250/irq.c +++ b/arch/mips/sibyte/sb1250/irq.c @@ -220,7 +220,7 @@ void __init init_sb1250_irqs(void) int i; for (i = 0; i < SB1250_NR_IRQS; i++) { - set_irq_chip(i, &sb1250_irq_type); + set_irq_chip_and_handler(i, &sb1250_irq_type, handle_level_irq); sb1250_irq_owner[i] = 0; } } diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c index 3f8cf5e..7dd76fb 100644 --- a/arch/mips/sni/a20r.c +++ b/arch/mips/sni/a20r.c @@ -219,7 +219,7 @@ void __init sni_a20r_irq_init(void) int i; for (i = SNI_A20R_IRQ_BASE + 2 ; i < SNI_A20R_IRQ_BASE + 8; i++) - set_irq_chip(i, &a20r_irq_type); + set_irq_chip_and_handler(i, &a20r_irq_type, handle_level_irq); sni_hwint = a20r_hwint; change_c0_status(ST0_IM, IE_IRQ0); setup_irq(SNI_A20R_IRQ_BASE + 3, &sni_isa_irq); diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c index 834650f..74e6c67 100644 --- a/arch/mips/sni/pcimt.c +++ b/arch/mips/sni/pcimt.c @@ -304,7 +304,7 @@ void __init sni_pcimt_irq_init(void) mips_cpu_irq_init(); /* Actually we've got more interrupts to handle ... */ for (i = PCIMT_IRQ_INT2; i <= PCIMT_IRQ_SCSI; i++) - set_irq_chip(i, &pcimt_irq_type); + set_irq_chip_and_handler(i, &pcimt_irq_type, handle_level_irq); sni_hwint = sni_pcimt_hwint; change_c0_status(ST0_IM, IE_IRQ1|IE_IRQ3); } diff --git a/arch/mips/sni/pcit.c b/arch/mips/sni/pcit.c index e5f12cf..071a957 100644 --- a/arch/mips/sni/pcit.c +++ b/arch/mips/sni/pcit.c @@ -246,7 +246,7 @@ void __init sni_pcit_irq_init(void) mips_cpu_irq_init(); for (i = SNI_PCIT_INT_START; i <= SNI_PCIT_INT_END; i++) - set_irq_chip(i, &pcit_irq_type); + set_irq_chip_and_handler(i, &pcit_irq_type, handle_level_irq); *(volatile u32 *)SNI_PCIT_INT_REG = 0; sni_hwint = sni_pcit_hwint; change_c0_status(ST0_IM, IE_IRQ1); @@ -259,7 +259,7 @@ void __init sni_pcit_cplus_irq_init(void) mips_cpu_irq_init(); for (i = SNI_PCIT_INT_START; i <= SNI_PCIT_INT_END; i++) - set_irq_chip(i, &pcit_irq_type); + set_irq_chip_and_handler(i, &pcit_irq_type, handle_level_irq); *(volatile u32 *)SNI_PCIT_INT_REG = 0x40000000; sni_hwint = sni_pcit_hwint_cplus; change_c0_status(ST0_IM, IE_IRQ0); diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c index 5310aa7..b4352a0 100644 --- a/arch/mips/sni/rm200.c +++ b/arch/mips/sni/rm200.c @@ -487,7 +487,7 @@ void __init sni_rm200_irq_init(void) mips_cpu_irq_init(); /* Actually we've got more interrupts to handle ... */ for (i = SNI_RM200_INT_START; i <= SNI_RM200_INT_END; i++) - set_irq_chip(i, &rm200_irq_type); + set_irq_chip_and_handler(i, &rm200_irq_type, handle_level_irq); sni_hwint = sni_rm200_hwint; change_c0_status(ST0_IM, IE_IRQ0); setup_irq(SNI_RM200_INT_START + 0, &sni_rm200_i8259A_irq); diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig index 226e8bb..0db7cf3 100644 --- a/arch/mips/txx9/Kconfig +++ b/arch/mips/txx9/Kconfig @@ -20,7 +20,6 @@ config MACH_TXX9 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_BIG_ENDIAN - select GENERIC_HARDIRQS_NO__DO_IRQ config TOSHIBA_JMR3927 bool "Toshiba JMR-TX3927 board" |
