summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/alpha/kernel/osf_sys.c6
-rw-r--r--arch/arm/Kconfig6
-rw-r--r--arch/arm/Makefile4
-rw-r--r--arch/arm/boot/Makefile12
-rw-r--r--arch/arm/boot/compressed/head.S14
-rw-r--r--arch/arm/boot/dts/Makefile56
-rw-r--r--arch/arm/boot/dts/animeo_ip.dts178
-rw-r--r--arch/arm/boot/dts/at91rm9200.dtsi349
-rw-r--r--arch/arm/boot/dts/at91rm9200ek.dts79
-rw-r--r--arch/arm/boot/dts/at91sam9260.dtsi295
-rw-r--r--arch/arm/boot/dts/at91sam9263.dtsi299
-rw-r--r--arch/arm/boot/dts/at91sam9263ek.dts29
-rw-r--r--arch/arm/boot/dts/at91sam9g15.dtsi28
-rw-r--r--arch/arm/boot/dts/at91sam9g15ek.dts16
-rw-r--r--arch/arm/boot/dts/at91sam9g20ek_2mmc.dts26
-rw-r--r--arch/arm/boot/dts/at91sam9g20ek_common.dtsi30
-rw-r--r--arch/arm/boot/dts/at91sam9g25.dtsi28
-rw-r--r--arch/arm/boot/dts/at91sam9g25ek.dts49
-rw-r--r--arch/arm/boot/dts/at91sam9g35.dtsi28
-rw-r--r--arch/arm/boot/dts/at91sam9g35ek.dts16
-rw-r--r--arch/arm/boot/dts/at91sam9g45.dtsi301
-rw-r--r--arch/arm/boot/dts/at91sam9m10g45ek.dts48
-rw-r--r--arch/arm/boot/dts/at91sam9n12.dtsi225
-rw-r--r--arch/arm/boot/dts/at91sam9n12ek.dts22
-rw-r--r--arch/arm/boot/dts/at91sam9x25.dtsi49
-rw-r--r--arch/arm/boot/dts/at91sam9x25ek.dts16
-rw-r--r--arch/arm/boot/dts/at91sam9x35.dtsi28
-rw-r--r--arch/arm/boot/dts/at91sam9x35ek.dts16
-rw-r--r--arch/arm/boot/dts/at91sam9x5.dtsi270
-rw-r--r--arch/arm/boot/dts/at91sam9x5ek.dtsi101
-rw-r--r--arch/arm/boot/dts/pm9g45.dts165
-rw-r--r--arch/arm/boot/dts/spear1310-evb.dts4
-rw-r--r--arch/arm/boot/dts/spear1310.dtsi27
-rw-r--r--arch/arm/boot/dts/spear1340-evb.dts4
-rw-r--r--arch/arm/boot/dts/spear1340.dtsi26
-rw-r--r--arch/arm/boot/dts/spear310.dtsi22
-rw-r--r--arch/arm/boot/dts/spear320-evb.dts4
-rw-r--r--arch/arm/boot/dts/spear320.dtsi23
-rw-r--r--arch/arm/boot/dts/tegra20-seaboard.dts4
-rw-r--r--arch/arm/common/timer-sp.c2
-rw-r--r--arch/arm/configs/at91_dt_defconfig1
-rw-r--r--arch/arm/include/asm/hardware/sp810.h2
-rw-r--r--arch/arm/include/asm/io.h2
-rw-r--r--arch/arm/include/asm/prom.h2
-rw-r--r--arch/arm/mach-at91/Kconfig9
-rw-r--r--arch/arm/mach-at91/Makefile1
-rw-r--r--arch/arm/mach-at91/at91rm9200.c22
-rw-r--r--arch/arm/mach-at91/at91rm9200_time.c63
-rw-r--r--arch/arm/mach-at91/at91sam9260.c8
-rw-r--r--arch/arm/mach-at91/at91sam9261.c4
-rw-r--r--arch/arm/mach-at91/at91sam9263.c11
-rw-r--r--arch/arm/mach-at91/at91sam9g45.c12
-rw-r--r--arch/arm/mach-at91/at91sam9n12.c16
-rw-r--r--arch/arm/mach-at91/at91sam9rl.c4
-rw-r--r--arch/arm/mach-at91/at91sam9x5.c21
-rw-r--r--arch/arm/mach-at91/board-dt.c2
-rw-r--r--arch/arm/mach-at91/board-rm9200-dt.c57
-rw-r--r--arch/arm/mach-at91/generic.h1
-rw-r--r--arch/arm/mach-at91/gpio.c190
-rw-r--r--arch/arm/mach-at91/include/mach/board.h10
-rw-r--r--arch/arm/mach-at91/setup.c20
-rw-r--r--arch/arm/mach-at91/soc.h12
-rw-r--r--arch/arm/mach-davinci/dm644x.c3
-rw-r--r--arch/arm/mach-dove/include/mach/pm.h2
-rw-r--r--arch/arm/mach-dove/irq.c14
-rw-r--r--arch/arm/mach-exynos/dma.c3
-rw-r--r--arch/arm/mach-exynos/include/mach/map.h1
-rw-r--r--arch/arm/mach-integrator/impd1.c69
-rw-r--r--arch/arm/mach-ixp4xx/common-pci.c1
-rw-r--r--arch/arm/mach-ixp4xx/common.c13
-rw-r--r--arch/arm/mach-ixp4xx/goramo_mlr.c3
-rw-r--r--arch/arm/mach-ixp4xx/include/mach/debug-macro.S4
-rw-r--r--arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h46
-rw-r--r--arch/arm/mach-ixp4xx/include/mach/qmgr.h12
-rw-r--r--arch/arm/mach-ixp4xx/ixp4xx_npe.c9
-rw-r--r--arch/arm/mach-ixp4xx/ixp4xx_qmgr.c12
-rw-r--r--arch/arm/mach-kirkwood/pcie.c11
-rw-r--r--arch/arm/mach-nomadik/board-nhk8815.c3
-rw-r--r--arch/arm/mach-nomadik/cpu-8815.c2
-rw-r--r--arch/arm/mach-nomadik/i2c-8815nhk.c3
-rw-r--r--arch/arm/mach-omap2/board-igep0020.c5
-rw-r--r--arch/arm/mach-omap2/board-overo.c1
-rw-r--r--arch/arm/mach-omap2/common-board-devices.c34
-rw-r--r--arch/arm/mach-omap2/drm.c7
-rw-r--r--arch/arm/mach-omap2/twl-common.c1
-rw-r--r--arch/arm/mach-shmobile/board-kzm9g.c2
-rw-r--r--arch/arm/mach-u300/core.c5
-rw-r--r--arch/arm/mach-u300/include/mach/irqs.h126
-rw-r--r--arch/arm/mach-ux500/board-mop500-audio.c3
-rw-r--r--arch/arm/mach-ux500/board-mop500-pins.c3
-rw-r--r--arch/arm/mach-ux500/board-mop500.c2
-rw-r--r--arch/arm/mach-ux500/cpu-db8500.c12
-rw-r--r--arch/arm/mach-ux500/devices-common.c3
-rw-r--r--arch/arm/mach-ux500/devices-common.h8
-rw-r--r--arch/arm/mach-vexpress/v2m.c2
-rw-r--r--arch/arm/mm/mmap.c2
-rw-r--r--arch/arm/mm/proc-v6.S2
-rw-r--r--arch/arm/plat-nomadik/include/plat/gpio-nomadik.h102
-rw-r--r--arch/arm/plat-nomadik/include/plat/pincfg.h173
-rw-r--r--arch/arm/plat-omap/i2c.c21
-rw-r--r--arch/arm/plat-omap/include/plat/mmc.h1
-rw-r--r--arch/arm/plat-s3c24xx/dma.c9
-rw-r--r--arch/arm/plat-spear/Kconfig1
-rw-r--r--arch/arm64/Makefile17
-rw-r--r--arch/arm64/boot/Makefile5
-rw-r--r--arch/arm64/boot/dts/.gitignore1
-rw-r--r--arch/arm64/boot/dts/Makefile5
-rw-r--r--arch/arm64/include/asm/unistd32.h2
-rw-r--r--arch/c6x/Makefile2
-rw-r--r--arch/c6x/boot/Makefile20
-rw-r--r--arch/c6x/boot/dts/Makefile20
-rw-r--r--arch/c6x/boot/dts/linked_dtb.S2
-rw-r--r--arch/c6x/boot/linked_dtb.S2
-rw-r--r--arch/c6x/include/asm/setup.h33
-rw-r--r--arch/c6x/include/uapi/asm/Kbuild2
-rw-r--r--arch/c6x/include/uapi/asm/kvm_para.h1
-rw-r--r--arch/c6x/include/uapi/asm/setup.h33
-rw-r--r--arch/c6x/kernel/entry.S5
-rw-r--r--arch/ia64/include/asm/device.h3
-rw-r--r--arch/ia64/include/asm/io.h2
-rw-r--r--arch/ia64/kernel/acpi.c2
-rw-r--r--arch/ia64/kernel/efi.c2
-rw-r--r--arch/m68k/include/asm/signal.h6
-rw-r--r--arch/microblaze/Makefile2
-rw-r--r--arch/microblaze/boot/Makefile19
-rw-r--r--arch/microblaze/boot/dts/Makefile22
-rw-r--r--arch/microblaze/boot/dts/linked_dtb.S2
-rw-r--r--arch/microblaze/boot/linked_dtb.S3
-rw-r--r--arch/microblaze/kernel/signal.c2
-rw-r--r--arch/microblaze/pci/pci-common.c4
-rw-r--r--arch/mips/cavium-octeon/Makefile3
-rw-r--r--arch/mips/include/asm/hugetlb.h12
-rw-r--r--arch/mips/kernel/cpu-probe.c1
-rw-r--r--arch/mips/kernel/entry.S7
-rw-r--r--arch/mips/kernel/scall64-n32.S6
-rw-r--r--arch/mips/kernel/setup.c26
-rw-r--r--arch/mips/lantiq/dts/Makefile3
-rw-r--r--arch/mips/lib/mips-atomic.c8
-rw-r--r--arch/mips/mm/tlb-r4k.c18
-rw-r--r--arch/mips/netlogic/dts/Makefile3
-rw-r--r--arch/mips/pci/pci.c2
-rw-r--r--arch/openrisc/Makefile2
-rw-r--r--arch/openrisc/boot/dts/Makefile (renamed from arch/openrisc/boot/Makefile)5
-rw-r--r--arch/openrisc/kernel/signal.c6
-rw-r--r--arch/parisc/kernel/signal32.c6
-rw-r--r--arch/parisc/kernel/sys_parisc.c2
-rw-r--r--arch/parisc/kernel/syscall_table.S2
-rw-r--r--arch/powerpc/boot/dts/mpc5200b.dtsi6
-rw-r--r--arch/powerpc/boot/dts/o2d.dtsi6
-rw-r--r--arch/powerpc/boot/dts/pcm030.dts7
-rw-r--r--arch/powerpc/kernel/pci-common.c4
-rw-r--r--arch/powerpc/kernel/pci_64.c4
-rw-r--r--arch/powerpc/platforms/52xx/mpc52xx_pic.c9
-rw-r--r--arch/powerpc/platforms/powermac/pfunc_core.c2
-rw-r--r--arch/powerpc/platforms/pseries/eeh_pe.c2
-rw-r--r--arch/powerpc/platforms/pseries/msi.c3
-rw-r--r--arch/powerpc/platforms/pseries/processor_idle.c4
-rw-r--r--arch/powerpc/platforms/pseries/reconfig.c3
-rw-r--r--arch/powerpc/sysdev/fsl_pci.c2
-rw-r--r--arch/powerpc/sysdev/scom.c2
-rw-r--r--arch/s390/kernel/compat_wrapper.S2
-rw-r--r--arch/score/kernel/signal.c7
-rw-r--r--arch/sh/drivers/pci/pci.c2
-rw-r--r--arch/sh/include/asm/io.h2
-rw-r--r--arch/sh/kernel/signal_64.c6
-rw-r--r--arch/sh/mm/mmap.c2
-rw-r--r--arch/sparc/boot/piggyback.c12
-rw-r--r--arch/sparc/include/asm/prom.h5
-rw-r--r--arch/sparc/kernel/pci_impl.h2
-rw-r--r--arch/sparc/kernel/signal_64.c4
-rw-r--r--arch/sparc/kernel/sys32.S2
-rw-r--r--arch/sparc/kernel/syscalls.S14
-rw-r--r--arch/sparc/kernel/systbls_64.S2
-rw-r--r--arch/um/kernel/exec.c3
-rw-r--r--arch/unicore32/kernel/pci.c2
-rw-r--r--arch/x86/boot/compressed/eboot.c2
-rw-r--r--arch/x86/boot/header.S3
-rw-r--r--arch/x86/include/asm/Kbuild3
-rw-r--r--arch/x86/include/asm/device.h3
-rw-r--r--arch/x86/include/asm/fpu-internal.h15
-rw-r--r--arch/x86/include/asm/ptrace.h15
-rw-r--r--arch/x86/kernel/acpi/boot.c6
-rw-r--r--arch/x86/kernel/acpi/sleep.c2
-rw-r--r--arch/x86/kernel/cpu/amd.c14
-rw-r--r--arch/x86/kernel/cpu/mcheck/mce_amd.c2
-rw-r--r--arch/x86/kernel/cpu/mcheck/mce_intel.c31
-rw-r--r--arch/x86/kernel/entry_64.S14
-rw-r--r--arch/x86/kernel/head_32.S9
-rw-r--r--arch/x86/kernel/microcode_amd.c8
-rw-r--r--arch/x86/kernel/ptrace.c37
-rw-r--r--arch/x86/kernel/smpboot.c5
-rw-r--r--arch/x86/kvm/emulate.c3
-rw-r--r--arch/x86/mm/tlb.c2
-rw-r--r--arch/x86/pci/ce4100.c13
-rw-r--r--arch/x86/platform/ce4100/ce4100.c24
195 files changed, 3502 insertions, 1272 deletions
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 1e6956a..14db93e 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -445,7 +445,7 @@ struct procfs_args {
* unhappy with OSF UFS. [CHECKME]
*/
static int
-osf_ufs_mount(char *dirname, struct ufs_args __user *args, int flags)
+osf_ufs_mount(const char *dirname, struct ufs_args __user *args, int flags)
{
int retval;
struct cdfs_args tmp;
@@ -465,7 +465,7 @@ osf_ufs_mount(char *dirname, struct ufs_args __user *args, int flags)
}
static int
-osf_cdfs_mount(char *dirname, struct cdfs_args __user *args, int flags)
+osf_cdfs_mount(const char *dirname, struct cdfs_args __user *args, int flags)
{
int retval;
struct cdfs_args tmp;
@@ -485,7 +485,7 @@ osf_cdfs_mount(char *dirname, struct cdfs_args __user *args, int flags)
}
static int
-osf_procfs_mount(char *dirname, struct procfs_args __user *args, int flags)
+osf_procfs_mount(const char *dirname, struct procfs_args __user *args, int flags)
{
struct procfs_args tmp;
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ade7e92..8a027f9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -330,6 +330,8 @@ config ARCH_AT91
select IRQ_DOMAIN
select NEED_MACH_GPIO_H
select NEED_MACH_IO_H if PCCARD
+ select PINCTRL
+ select PINCTRL_AT91 if USE_OF
help
This enables support for systems based on Atmel
AT91RM9200 and AT91SAM9* processors.
@@ -364,6 +366,7 @@ config ARCH_CNS3XXX
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
+ select ARCH_REQUIRE_GPIOLIB
select ARCH_USES_GETTIMEOFFSET
select CLKDEV_LOOKUP
select COMMON_CLK
@@ -547,6 +550,7 @@ config ARCH_KIRKWOOD
select CPU_FEROCEON
select GENERIC_CLOCKEVENTS
select PCI
+ select PCI_QUIRKS
select PLAT_ORION_LEGACY
help
Support for the following Marvell Kirkwood series SoCs:
@@ -586,6 +590,7 @@ config ARCH_MMP
select GPIO_PXA
select IRQ_DOMAIN
select NEED_MACH_GPIO_H
+ select PINCTRL
select PLAT_PXA
select SPARSE_IRQ
help
@@ -904,6 +909,7 @@ config ARCH_NOMADIK
config PLAT_SPEAR
bool "ST SPEAr"
+ select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select CLKDEV_LOOKUP
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 5f914fc..c35baf1 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -292,10 +292,10 @@ zinstall uinstall install: vmlinux
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
%.dtb: scripts
- $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+ $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@
dtbs: scripts
- $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+ $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) dtbs
# We use MRPROPER_FILES and CLEAN_FILES now
archclean:
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 9137df5..abfce28 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -15,8 +15,6 @@ ifneq ($(MACHINE),)
include $(srctree)/$(MACHINE)/Makefile.boot
endif
-include $(srctree)/arch/arm/boot/dts/Makefile
-
# Note: the following conditions must always be true:
# ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
# PARAMS_PHYS must be within 4MB of ZRELADDR
@@ -59,16 +57,6 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
endif
-targets += $(dtb-y)
-
-# Rule to build device tree blobs
-$(obj)/%.dtb: $(src)/dts/%.dts FORCE
- $(call if_changed_dep,dtc)
-
-$(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
-
-clean-files := *.dtb
-
ifneq ($(LOADADDR),)
UIMAGE_LOADADDR=$(LOADADDR)
else
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 90275f0..49ca86e 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -652,6 +652,15 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size
mov pc, lr
ENDPROC(__setup_mmu)
+@ Enable unaligned access on v6, to allow better code generation
+@ for the decompressor C code:
+__armv6_mmu_cache_on:
+ mrc p15, 0, r0, c1, c0, 0 @ read SCTLR
+ bic r0, r0, #2 @ A (no unaligned access fault)
+ orr r0, r0, #1 << 22 @ U (v6 unaligned access model)
+ mcr p15, 0, r0, c1, c0, 0 @ write SCTLR
+ b __armv4_mmu_cache_on
+
__arm926ejs_mmu_cache_on:
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
mov r0, #4 @ put dcache in WT mode
@@ -694,6 +703,9 @@ __armv7_mmu_cache_on:
bic r0, r0, #1 << 28 @ clear SCTLR.TRE
orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement
orr r0, r0, #0x003c @ write buffer
+ bic r0, r0, #2 @ A (no unaligned access fault)
+ orr r0, r0, #1 << 22 @ U (v6 unaligned access model)
+ @ (needed for ARM1176)
#ifdef CONFIG_MMU
#ifdef CONFIG_CPU_ENDIAN_BE8
orr r0, r0, #1 << 25 @ big-endian page tables
@@ -914,7 +926,7 @@ proc_types:
.word 0x0007b000 @ ARMv6
.word 0x000ff000
- W(b) __armv4_mmu_cache_on
+ W(b) __armv6_mmu_cache_on
W(b) __armv4_mmu_cache_off
W(b) __armv6_mmu_cache_flush
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f37cf9f..2624937 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1,21 +1,37 @@
ifeq ($(CONFIG_OF),y)
-dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \
- at91sam9263ek.dtb \
- at91sam9g20ek_2mmc.dtb \
- at91sam9g20ek.dtb \
- at91sam9g25ek.dtb \
- at91sam9m10g45ek.dtb \
- at91sam9n12ek.dtb \
- ethernut5.dtb \
- evk-pro3.dtb \
- kizbox.dtb \
- tny_a9260.dtb \
- tny_a9263.dtb \
- tny_a9g20.dtb \
- usb_a9260.dtb \
- usb_a9263.dtb \
- usb_a9g20.dtb
+# Keep at91 dtb files sorted alphabetically for each SoC
+# rm9200
+dtb-$(CONFIG_ARCH_AT91) += at91rm9200ek.dtb
+# sam9260
+dtb-$(CONFIG_ARCH_AT91) += animeo_ip.dtb
+dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb
+dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb
+dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb
+dtb-$(CONFIG_ARCH_AT91) += tny_a9260.dtb
+dtb-$(CONFIG_ARCH_AT91) += usb_a9260.dtb
+# sam9263
+dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb
+dtb-$(CONFIG_ARCH_AT91) += usb_a9263.dtb
+# sam9g20
+dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek_2mmc.dtb
+dtb-$(CONFIG_ARCH_AT91) += kizbox.dtb
+dtb-$(CONFIG_ARCH_AT91) += tny_a9g20.dtb
+dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb
+# sam9g45
+dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb
+# sam9n12
+dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb
+# sam9x5
+dtb-$(CONFIG_ARCH_AT91) += at91sam9g15ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
+
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
dove-cubox.dtb \
@@ -104,4 +120,12 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
wm8505-ref.dtb \
wm8650-mid.dtb
+targets += dtbs
endif
+
+# *.dtb used to be generated in the directory above. Clean out the
+# old build results so people don't accidentally use them.
+dtbs: $(addprefix $(obj)/, $(dtb-y))
+ $(Q)rm -f $(obj)/../*.dtb
+
+clean-files := *.dtb
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
new file mode 100644
index 0000000..74d92cd
--- /dev/null
+++ b/arch/arm/boot/dts/animeo_ip.dts
@@ -0,0 +1,178 @@
+/*
+ * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards
+ *
+ * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 only.
+ */
+
+/dts-v1/;
+/include/ "at91sam9260.dtsi"
+
+/ {
+ model = "Somfy Animeo IP";
+ compatible = "somfy,animeo-ip", "atmel,at91sam9260", "atmel,at91sam9";
+
+ aliases {
+ serial0 = &usart1;
+ serial1 = &usart2;
+ serial2 = &usart0;
+ serial3 = &dbgu;
+ serial4 = &usart3;
+ serial5 = &uart0;
+ serial6 = &uart1;
+ };
+
+ chosen {
+ linux,stdout-path = &usart2;
+ };
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <18432000>;
+ };
+ };
+
+ ahb {
+ apb {
+ usart0: serial@fffb0000 {
+ pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>;
+ linux,rs485-enabled-at-boot-time;
+ status = "okay";
+ };
+
+ usart1: serial@fffb4000 {
+ pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts>;
+ linux,rs485-enabled-at-boot-time;
+ status = "okay";
+ };
+
+ usart2: serial@fffb8000 {
+ pinctrl-0 = <&pinctrl_usart2>;
+ status = "okay";
+ };
+
+ macb0: ethernet@fffc4000 {
+ pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii>;
+ phy-mode = "mii";
+ status = "okay";
+ };
+
+ mmc0: mmc@fffa8000 {
+ pinctrl-0 = <&pinctrl_mmc0_clk
+ &pinctrl_mmc0_slot1_cmd_dat0
+ &pinctrl_mmc0_slot1_dat1_3>;
+ status = "okay";
+
+ slot@1 {
+ reg = <1>;
+ bus-width = <4>;
+ };
+ };
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x8000>;
+ };
+
+ barebox@8000 {
+ label = "barebox";
+ reg = <0x8000 0x40000>;
+ };
+
+ bareboxenv@48000 {
+ label = "bareboxenv";
+ reg = <0x48000 0x8000>;
+ };
+
+ user_block@0x50000 {
+ label = "user_block";
+ reg = <0x50000 0xb0000>;
+ };
+
+ kernel@100000 {
+ label = "kernel";
+ reg = <0x100000 0x1b0000>;
+ };
+
+ root@2b0000 {
+ label = "root";
+ reg = <0x2b0000 0x1D50000>;
+ };
+ };
+
+ usb0: ohci@00500000 {
+ num-ports = <2>;
+ atmel,vbus-gpio = <&pioB 15 1>;
+ status = "okay";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power_green {
+ label = "power_green";
+ gpios = <&pioC 17 0>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ power_red {
+ label = "power_red";
+ gpios = <&pioA 2 0>;
+ };
+
+ tx_green {
+ label = "tx_green";
+ gpios = <&pioC 19 0>;
+ };
+
+ tx_red {
+ label = "tx_red";
+ gpios = <&pioC 18 0>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ keyswitch_in {
+ label = "keyswitch_in";
+ gpios = <&pioB 1 0>;
+ linux,code = <28>;
+ gpio-key,wakeup;
+ };
+
+ error_in {
+ label = "error_in";
+ gpios = <&pioB 2 0>;
+ linux,code = <29>;
+ gpio-key,wakeup;
+ };
+
+ btn {
+ label = "btn";
+ gpios = <&pioC 23 0>;
+ linux,code = <31>;
+ gpio-key,wakeup;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
new file mode 100644
index 0000000..e154f24
--- /dev/null
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -0,0 +1,349 @@
+/*
+ * at91rm9200.dtsi - Device Tree Include file for AT91RM9200 family SoC
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
+ * 2012 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Based on at91sam9260.dtsi
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Atmel AT91RM9200 family SoC";
+ compatible = "atmel,at91rm9200";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &dbgu;
+ serial1 = &usart0;
+ serial2 = &usart1;
+ serial3 = &usart2;
+ serial4 = &usart3;
+ gpio0 = &pioA;
+ gpio1 = &pioB;
+ gpio2 = &pioC;
+ gpio3 = &pioD;
+ tcb0 = &tcb0;
+ tcb1 = &tcb1;
+ };
+ cpus {
+ cpu@0 {
+ compatible = "arm,arm920t";
+ };
+ };
+
+ memory {
+ reg = <0x20000000 0x04000000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ aic: interrupt-controller@fffff000 {
+ #interrupt-cells = <3>;
+ compatible = "atmel,at91rm9200-aic";
+ interrupt-controller;
+ reg = <0xfffff000 0x200>;
+ atmel,external-irqs = <25 26 27 28 29 30 31>;
+ };
+
+ ramc0: ramc@ffffff00 {
+ compatible = "atmel,at91rm9200-sdramc";
+ reg = <0xffffff00 0x100>;
+ };
+
+ pmc: pmc@fffffc00 {
+ compatible = "atmel,at91rm9200-pmc";
+ reg = <0xfffffc00 0x100>;
+ };
+
+ st: timer@fffffd00 {
+ compatible = "atmel,at91rm9200-st";
+ reg = <0xfffffd00 0x100>;
+ interrupts = <1 4 7>;
+ };
+
+ tcb0: timer@fffa0000 {
+ compatible = "atmel,at91rm9200-tcb";
+ reg = <0xfffa0000 0x100>;
+ interrupts = <17 4 0 18 4 0 19 4 0>;
+ };
+
+ tcb1: timer@fffa4000 {
+ compatible = "atmel,at91rm9200-tcb";
+ reg = <0xfffa4000 0x100>;
+ interrupts = <20 4 0 21 4 0 22 4 0>;
+ };
+
+ pinctrl@fffff400 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ ranges = <0xfffff400 0xfffff400 0x800>;
+
+ atmel,mux-mask = <
+ /* A B */
+ 0xffffffff 0xffffffff /* pioA */
+ 0xffffffff 0x083fffff /* pioB */
+ 0xffff3fff 0x00000000 /* pioC */
+ 0x03ff87ff 0x0fffff80 /* pioD */
+ >;
+
+ /* shared pinctrl settings */
+ dbgu {
+ pinctrl_dbgu: dbgu-0 {
+ atmel,pins =
+ <0 30 0x1 0x0 /* PA30 periph A */
+ 0 31 0x1 0x1>; /* PA31 periph with pullup */
+ };
+ };
+
+ uart0 {
+ pinctrl_uart0: uart0-0 {
+ atmel,pins =
+ <0 17 0x1 0x0 /* PA17 periph A */
+ 0 18 0x1 0x0>; /* PA18 periph A */
+ };
+
+ pinctrl_uart0_rts: uart0_rts-0 {
+ atmel,pins =
+ <0 20 0x1 0x0>; /* PA20 periph A */
+ };
+
+ pinctrl_uart0_cts: uart0_cts-0 {
+ atmel,pins =
+ <0 21 0x1 0x0>; /* PA21 periph A */
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1: uart1-0 {
+ atmel,pins =
+ <1 20 0x1 0x1 /* PB20 periph A with pullup */
+ 1 21 0x1 0x0>; /* PB21 periph A */
+ };
+
+ pinctrl_uart1_rts: uart1_rts-0 {
+ atmel,pins =
+ <1 24 0x1 0x0>; /* PB24 periph A */
+ };
+
+ pinctrl_uart1_cts: uart1_cts-0 {
+ atmel,pins =
+ <1 26 0x1 0x0>; /* PB26 periph A */
+ };
+
+ pinctrl_uart1_dtr_dsr: uart1_dtr_dsr-0 {
+ atmel,pins =
+ <1 19 0x1 0x0 /* PB19 periph A */
+ 1 25 0x1 0x0>; /* PB25 periph A */
+ };
+
+ pinctrl_uart1_dcd: uart1_dcd-0 {
+ atmel,pins =
+ <1 23 0x1 0x0>; /* PB23 periph A */
+ };
+
+ pinctrl_uart1_ri: uart1_ri-0 {
+ atmel,pins =
+ <1 18 0x1 0x0>; /* PB18 periph A */
+ };
+ };
+
+ uart2 {
+ pinctrl_uart2: uart2-0 {
+ atmel,pins =
+ <0 22 0x1 0x0 /* PA22 periph A */
+ 0 23 0x1 0x1>; /* PA23 periph A with pullup */
+ };
+
+ pinctrl_uart2_rts: uart2_rts-0 {
+ atmel,pins =
+ <0 30 0x2 0x0>; /* PA30 periph B */
+ };
+
+ pinctrl_uart2_cts: uart2_cts-0 {
+ atmel,pins =
+ <0 31 0x2 0x0>; /* PA31 periph B */
+ };
+ };
+
+ uart3 {
+ pinctrl_uart3: uart3-0 {
+ atmel,pins =
+ <0 5 0x2 0x1 /* PA5 periph B with pullup */
+ 0 6 0x2 0x0>; /* PA6 periph B */
+ };
+
+ pinctrl_uart3_rts: uart3_rts-0 {
+ atmel,pins =
+ <1 0 0x2 0x0>; /* PB0 periph B */
+ };
+
+ pinctrl_uart3_cts: uart3_cts-0 {
+ atmel,pins =
+ <1 1 0x2 0x0>; /* PB1 periph B */
+ };
+ };
+
+ nand {
+ pinctrl_nand: nand-0 {
+ atmel,pins =
+ <2 2 0x0 0x1 /* PC2 gpio RDY pin pull_up */
+ 1 1 0x0 0x1>; /* PB1 gpio CD pin pull_up */
+ };
+ };
+
+ pioA: gpio@fffff400 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <2 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioB: gpio@fffff600 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x200>;
+ interrupts = <3 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioC: gpio@fffff800 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x200>;
+ interrupts = <4 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioD: gpio@fffffa00 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffffa00 0x200>;
+ interrupts = <5 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ dbgu: serial@fffff200 {
+ compatible = "atmel,at91rm9200-usart";
+ reg = <0xfffff200 0x200>;
+ interrupts = <1 4 7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dbgu>;
+ status = "disabled";
+ };
+
+ usart0: serial@fffc0000 {
+ compatible = "atmel,at91rm9200-usart";
+ reg = <0xfffc0000 0x200>;
+ interrupts = <6 4 5>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ status = "disabled";
+ };
+
+ usart1: serial@fffc4000 {
+ compatible = "atmel,at91rm9200-usart";
+ reg = <0xfffc4000 0x200>;
+ interrupts = <7 4 5>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "disabled";
+ };
+
+ usart2: serial@fffc8000 {
+ compatible = "atmel,at91rm9200-usart";
+ reg = <0xfffc8000 0x200>;
+ interrupts = <8 4 5>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "disabled";
+ };
+
+ usart3: serial@fffcc000 {
+ compatible = "atmel,at91rm9200-usart";
+ reg = <0xfffcc000 0x200>;
+ interrupts = <23 4 5>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "disabled";
+ };
+
+ usb1: gadget@fffb0000 {
+ compatible = "atmel,at91rm9200-udc";
+ reg = <0xfffb0000 0x4000>;
+ interrupts = <11 4 2>;
+ status = "disabled";
+ };
+ };
+
+ nand0: nand@40000000 {
+ compatible = "atmel,at91rm9200-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x40000000 0x10000000>;
+ atmel,nand-addr-offset = <21>;
+ atmel,nand-cmd-offset = <22>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
+ nand-ecc-mode = "soft";
+ gpios = <&pioC 2 0
+ 0
+ &pioB 1 0
+ >;
+ status = "disabled";
+ };
+
+ usb0: ohci@00300000 {
+ compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+ reg = <0x00300000 0x100000>;
+ interrupts = <23 4 2>;
+ status = "disabled";
+ };
+ };
+
+ i2c@0 {
+ compatible = "i2c-gpio";
+ gpios = <&pioA 23 0 /* sda */
+ &pioA 24 0 /* scl */
+ >;
+ i2c-gpio,sda-open-drain;
+ i2c-gpio,scl-open-drain;
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+};
diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
new file mode 100644
index 0000000..8aa4893
--- /dev/null
+++ b/arch/arm/boot/dts/at91rm9200ek.dts
@@ -0,0 +1,79 @@
+/*
+ * at91rm9200ek.dts - Device Tree file for Atmel AT91RM9200 evaluation kit
+ *
+ * Copyright (C) 2012 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Licensed under GPLv2 only
+ */
+/dts-v1/;
+/include/ "at91rm9200.dtsi"
+
+/ {
+ model = "Atmel AT91RM9200 evaluation kit";
+ compatible = "atmel,at91rm9200ek", "atmel,at91rm9200";
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <18432000>;
+ };
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+
+ usart1: serial@fffc4000 {
+ pinctrl-0 =
+ <&pinctrl_uart1
+ &pinctrl_uart1_rts
+ &pinctrl_uart1_cts
+ &pinctrl_uart1_dtr_dsr
+ &pinctrl_uart1_dcd
+ &pinctrl_uart1_ri>;
+ status = "okay";
+ };
+
+ usb1: gadget@fffb0000 {
+ atmel,vbus-gpio = <&pioD 4 0>;
+ status = "okay";
+ };
+ };
+
+ usb0: ohci@00300000 {
+ num-ports = <2>;
+ status = "okay";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ ds2 {
+ label = "green";
+ gpios = <&pioB 0 0x1>;
+ linux,default-trigger = "mmc0";
+ };
+
+ ds4 {
+ label = "yellow";
+ gpios = <&pioB 1 0x1>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ ds6 {
+ label = "red";
+ gpios = <&pioB 2 0x1>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index d410581..b1d3fab 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -21,8 +21,8 @@
serial2 = &usart1;
serial3 = &usart2;
serial4 = &usart3;
- serial5 = &usart4;
- serial6 = &usart5;
+ serial5 = &uart0;
+ serial6 = &uart1;
gpio0 = &pioA;
gpio1 = &pioB;
gpio2 = &pioC;
@@ -98,40 +98,250 @@
interrupts = <26 4 0 27 4 0 28 4 0>;
};
- pioA: gpio@fffff400 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff400 0x100>;
- interrupts = <2 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ pinctrl@fffff400 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ ranges = <0xfffff400 0xfffff400 0x600>;
+
+ atmel,mux-mask = <
+ /* A B */
+ 0xffffffff 0xffc00c3b /* pioA */
+ 0xffffffff 0x7fff3ccf /* pioB */
+ 0xffffffff 0x007fffff /* pioC */
+ >;
+
+ /* shared pinctrl settings */
+ dbgu {
+ pinctrl_dbgu: dbgu-0 {
+ atmel,pins =
+ <1 14 0x1 0x0 /* PB14 periph A */
+ 1 15 0x1 0x1>; /* PB15 periph with pullup */
+ };
+ };
- pioB: gpio@fffff600 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff600 0x100>;
- interrupts = <3 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ usart0 {
+ pinctrl_usart0: usart0-0 {
+ atmel,pins =
+ <1 4 0x1 0x0 /* PB4 periph A */
+ 1 5 0x1 0x0>; /* PB5 periph A */
+ };
+
+ pinctrl_usart0_rts: usart0_rts-0 {
+ atmel,pins =
+ <1 26 0x1 0x0>; /* PB26 periph A */
+ };
+
+ pinctrl_usart0_cts: usart0_cts-0 {
+ atmel,pins =
+ <1 27 0x1 0x0>; /* PB27 periph A */
+ };
+
+ pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
+ atmel,pins =
+ <1 24 0x1 0x0 /* PB24 periph A */
+ 1 22 0x1 0x0>; /* PB22 periph A */
+ };
+
+ pinctrl_usart0_dcd: usart0_dcd-0 {
+ atmel,pins =
+ <1 23 0x1 0x0>; /* PB23 periph A */
+ };
+
+ pinctrl_usart0_ri: usart0_ri-0 {
+ atmel,pins =
+ <1 25 0x1 0x0>; /* PB25 periph A */
+ };
+ };
- pioC: gpio@fffff800 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff800 0x100>;
- interrupts = <4 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
+ usart1 {
+ pinctrl_usart1: usart1-0 {
+ atmel,pins =
+ <2 6 0x1 0x1 /* PB6 periph A with pullup */
+ 2 7 0x1 0x0>; /* PB7 periph A */
+ };
+
+ pinctrl_usart1_rts: usart1_rts-0 {
+ atmel,pins =
+ <1 28 0x1 0x0>; /* PB28 periph A */
+ };
+
+ pinctrl_usart1_cts: usart1_cts-0 {
+ atmel,pins =
+ <1 29 0x1 0x0>; /* PB29 periph A */
+ };
+ };
+
+ usart2 {
+ pinctrl_usart2: usart2-0 {
+ atmel,pins =
+ <1 8 0x1 0x1 /* PB8 periph A with pullup */
+ 1 9 0x1 0x0>; /* PB9 periph A */
+ };
+
+ pinctrl_usart2_rts: usart2_rts-0 {
+ atmel,pins =
+ <0 4 0x1 0x0>; /* PA4 periph A */
+ };
+
+ pinctrl_usart2_cts: usart2_cts-0 {
+ atmel,pins =
+ <0 5 0x1 0x0>; /* PA5 periph A */
+ };
+ };
+
+ usart3 {
+ pinctrl_usart3: usart3-0 {
+ atmel,pins =
+ <2 10 0x1 0x1 /* PB10 periph A with pullup */
+ 2 11 0x1 0x0>; /* PB11 periph A */
+ };
+
+ pinctrl_usart3_rts: usart3_rts-0 {
+ atmel,pins =
+ <3 8 0x2 0x0>; /* PB8 periph B */
+ };
+
+ pinctrl_usart3_cts: usart3_cts-0 {
+ atmel,pins =
+ <3 10 0x2 0x0>; /* PB10 periph B */
+ };
+ };
+
+ uart0 {
+ pinctrl_uart0: uart0-0 {
+ atmel,pins =
+ <0 31 0x2 0x1 /* PA31 periph B with pullup */
+ 0 30 0x2 0x0>; /* PA30 periph B */
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1: uart1-0 {
+ atmel,pins =
+ <2 12 0x1 0x1 /* PB12 periph A with pullup */
+ 2 13 0x1 0x0>; /* PB13 periph A */
+ };
+ };
+
+ nand {
+ pinctrl_nand: nand-0 {
+ atmel,pins =
+ <2 13 0x0 0x1 /* PC13 gpio RDY pin pull_up */
+ 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */
+ };
+ };
+
+ macb {
+ pinctrl_macb_rmii: macb_rmii-0 {
+ atmel,pins =
+ <0 12 0x1 0x0 /* PA12 periph A */
+ 0 13 0x1 0x0 /* PA13 periph A */
+ 0 14 0x1 0x0 /* PA14 periph A */
+ 0 15 0x1 0x0 /* PA15 periph A */
+ 0 16 0x1 0x0 /* PA16 periph A */
+ 0 17 0x1 0x0 /* PA17 periph A */
+ 0 18 0x1 0x0 /* PA18 periph A */
+ 0 19 0x1 0x0 /* PA19 periph A */
+ 0 20 0x1 0x0 /* PA20 periph A */
+ 0 21 0x1 0x0>; /* PA21 periph A */
+ };
+
+ pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+ atmel,pins =
+ <0 22 0x2 0x0 /* PA22 periph B */
+ 0 23 0x2 0x0 /* PA23 periph B */
+ 0 24 0x2 0x0 /* PA24 periph B */
+ 0 25 0x2 0x0 /* PA25 periph B */
+ 0 26 0x2 0x0 /* PA26 periph B */
+ 0 27 0x2 0x0 /* PA27 periph B */
+ 0 28 0x2 0x0 /* PA28 periph B */
+ 0 29 0x2 0x0>; /* PA29 periph B */
+ };
+
+ pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 {
+ atmel,pins =
+ <0 10 0x2 0x0 /* PA10 periph B */
+ 0 11 0x2 0x0 /* PA11 periph B */
+ 0 24 0x2 0x0 /* PA24 periph B */
+ 0 25 0x2 0x0 /* PA25 periph B */
+ 0 26 0x2 0x0 /* PA26 periph B */
+ 0 27 0x2 0x0 /* PA27 periph B */
+ 0 28 0x2 0x0 /* PA28 periph B */
+ 0 29 0x2 0x0>; /* PA29 periph B */
+ };
+ };
+
+ mmc0 {
+ pinctrl_mmc0_clk: mmc0_clk-0 {
+ atmel,pins =
+ <0 8 0x1 0x0>; /* PA8 periph A */
+ };
+
+ pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+ atmel,pins =
+ <0 7 0x1 0x1 /* PA7 periph A with pullup */
+ 0 6 0x1 0x1>; /* PA6 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+ atmel,pins =
+ <0 9 0x1 0x1 /* PA9 periph A with pullup */
+ 0 10 0x1 0x1 /* PA10 periph A with pullup */
+ 0 11 0x1 0x1>; /* PA11 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
+ atmel,pins =
+ <0 1 0x2 0x1 /* PA1 periph B with pullup */
+ 0 0 0x2 0x1>; /* PA0 periph B with pullup */
+ };
+
+ pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
+ atmel,pins =
+ <0 5 0x2 0x1 /* PA5 periph B with pullup */
+ 0 4 0x2 0x1 /* PA4 periph B with pullup */
+ 0 3 0x2 0x1>; /* PA3 periph B with pullup */
+ };
+ };
+
+ pioA: gpio@fffff400 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <2 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioB: gpio@fffff600 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x200>;
+ interrupts = <3 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioC: gpio@fffff800 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x200>;
+ interrupts = <4 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 4 7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dbgu>;
status = "disabled";
};
@@ -141,6 +351,8 @@
interrupts = <6 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart0>;
status = "disabled";
};
@@ -150,6 +362,8 @@
interrupts = <7 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart1>;
status = "disabled";
};
@@ -159,6 +373,8 @@
interrupts = <8 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart2>;
status = "disabled";
};
@@ -168,24 +384,30 @@
interrupts = <23 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart3>;
status = "disabled";
};
- usart4: serial@fffd4000 {
+ uart0: serial@fffd4000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffd4000 0x200>;
interrupts = <24 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
status = "disabled";
};
- usart5: serial@fffd8000 {
+ uart1: serial@fffd8000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffd8000 0x200>;
interrupts = <25 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
status = "disabled";
};
@@ -193,6 +415,8 @@
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xfffc4000 0x100>;
interrupts = <21 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb_rmii>;
status = "disabled";
};
@@ -212,6 +436,15 @@
status = "disabled";
};
+ mmc0: mmc@fffa8000 {
+ compatible = "atmel,hsmci";
+ reg = <0xfffa8000 0x600>;
+ interrupts = <9 4 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
adc0: adc@fffe0000 {
compatible = "atmel,at91sam9260-adc";
reg = <0xfffe0000 0x100>;
@@ -257,6 +490,8 @@
>;
atmel,nand-addr-offset = <21>;
atmel,nand-cmd-offset = <22>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
gpios = <&pioC 13 0
&pioC 14 0
0
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 3e6e5c1..66106ee 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -89,60 +89,243 @@
reg = <0xfffffd10 0x10>;
};
- pioA: gpio@fffff200 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff200 0x100>;
- interrupts = <2 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ pinctrl@fffff200 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ ranges = <0xfffff200 0xfffff200 0xa00>;
- pioB: gpio@fffff400 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff400 0x100>;
- interrupts = <3 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ atmel,mux-mask = <
+ /* A B */
+ 0xfffffffb 0xffffe07f /* pioA */
+ 0x0007ffff 0x39072fff /* pioB */
+ 0xffffffff 0x3ffffff8 /* pioC */
+ 0xfffffbff 0xffffffff /* pioD */
+ 0xffe00fff 0xfbfcff00 /* pioE */
+ >;
- pioC: gpio@fffff600 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff600 0x100>;
- interrupts = <4 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ /* shared pinctrl settings */
+ dbgu {
+ pinctrl_dbgu: dbgu-0 {
+ atmel,pins =
+ <2 30 0x1 0x0 /* PC30 periph A */
+ 2 31 0x1 0x1>; /* PC31 periph with pullup */
+ };
+ };
- pioD: gpio@fffff800 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff800 0x100>;
- interrupts = <4 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ usart0 {
+ pinctrl_usart0: usart0-0 {
+ atmel,pins =
+ <0 26 0x1 0x1 /* PA26 periph A with pullup */
+ 0 27 0x1 0x0>; /* PA27 periph A */
+ };
- pioE: gpio@fffffa00 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffffa00 0x100>;
- interrupts = <4 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
+ pinctrl_usart0_rts: usart0_rts-0 {
+ atmel,pins =
+ <0 28 0x1 0x0>; /* PA28 periph A */
+ };
+
+ pinctrl_usart0_cts: usart0_cts-0 {
+ atmel,pins =
+ <0 29 0x1 0x0>; /* PA29 periph A */
+ };
+ };
+
+ usart1 {
+ pinctrl_usart1: usart1-0 {
+ atmel,pins =
+ <3 0 0x1 0x1 /* PD0 periph A with pullup */
+ 3 1 0x1 0x0>; /* PD1 periph A */
+ };
+
+ pinctrl_usart1_rts: usart1_rts-0 {
+ atmel,pins =
+ <3 7 0x2 0x0>; /* PD7 periph B */
+ };
+
+ pinctrl_usart1_cts: usart1_cts-0 {
+ atmel,pins =
+ <3 8 0x2 0x0>; /* PD8 periph B */
+ };
+ };
+
+ usart2 {
+ pinctrl_usart2: usart2-0 {
+ atmel,pins =
+ <3 2 0x1 0x1 /* PD2 periph A with pullup */
+ 3 3 0x1 0x0>; /* PD3 periph A */
+ };
+
+ pinctrl_usart2_rts: usart2_rts-0 {
+ atmel,pins =
+ <3 5 0x2 0x0>; /* PD5 periph B */
+ };
+
+ pinctrl_usart2_cts: usart2_cts-0 {
+ atmel,pins =
+ <4 6 0x2 0x0>; /* PD6 periph B */
+ };
+ };
+
+ nand {
+ pinctrl_nand: nand-0 {
+ atmel,pins =
+ <0 22 0x0 0x1 /* PA22 gpio RDY pin pull_up*/
+ 3 15 0x0 0x1>; /* PD15 gpio enable pin pull_up */
+ };
+ };
+
+ macb {
+ pinctrl_macb_rmii: macb_rmii-0 {
+ atmel,pins =
+ <2 25 0x2 0x0 /* PC25 periph B */
+ 4 21 0x1 0x0 /* PE21 periph A */
+ 4 23 0x1 0x0 /* PE23 periph A */
+ 4 24 0x1 0x0 /* PE24 periph A */
+ 4 25 0x1 0x0 /* PE25 periph A */
+ 4 26 0x1 0x0 /* PE26 periph A */
+ 4 27 0x1 0x0 /* PE27 periph A */
+ 4 28 0x1 0x0 /* PE28 periph A */
+ 4 29 0x1 0x0 /* PE29 periph A */
+ 4 30 0x1 0x0>; /* PE30 periph A */
+ };
+
+ pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+ atmel,pins =
+ <2 20 0x2 0x0 /* PC20 periph B */
+ 2 21 0x2 0x0 /* PC21 periph B */
+ 2 22 0x2 0x0 /* PC22 periph B */
+ 2 23 0x2 0x0 /* PC23 periph B */
+ 2 24 0x2 0x0 /* PC24 periph B */
+ 2 25 0x2 0x0 /* PC25 periph B */
+ 2 27 0x2 0x0 /* PC27 periph B */
+ 4 22 0x2 0x0>; /* PE22 periph B */
+ };
+ };
+
+ mmc0 {
+ pinctrl_mmc0_clk: mmc0_clk-0 {
+ atmel,pins =
+ <0 12 0x1 0x0>; /* PA12 periph A */
+ };
+
+ pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+ atmel,pins =
+ <0 1 0x1 0x1 /* PA1 periph A with pullup */
+ 0 0 0x1 0x1>; /* PA0 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+ atmel,pins =
+ <0 3 0x1 0x1 /* PA3 periph A with pullup */
+ 0 4 0x1 0x1 /* PA4 periph A with pullup */
+ 0 5 0x1 0x1>; /* PA5 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
+ atmel,pins =
+ <0 16 0x1 0x1 /* PA16 periph A with pullup */
+ 0 17 0x1 0x1>; /* PA17 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
+ atmel,pins =
+ <0 18 0x1 0x1 /* PA18 periph A with pullup */
+ 0 19 0x1 0x1 /* PA19 periph A with pullup */
+ 0 20 0x1 0x1>; /* PA20 periph A with pullup */
+ };
+ };
+
+ mmc1 {
+ pinctrl_mmc1_clk: mmc1_clk-0 {
+ atmel,pins =
+ <0 6 0x1 0x0>; /* PA6 periph A */
+ };
+
+ pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 {
+ atmel,pins =
+ <0 7 0x1 0x1 /* PA7 periph A with pullup */
+ 0 8 0x1 0x1>; /* PA8 periph A with pullup */
+ };
+
+ pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+ atmel,pins =
+ <0 9 0x1 0x1 /* PA9 periph A with pullup */
+ 0 10 0x1 0x1 /* PA10 periph A with pullup */
+ 0 11 0x1 0x1>; /* PA11 periph A with pullup */
+ };
+
+ pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 {
+ atmel,pins =
+ <0 21 0x1 0x1 /* PA21 periph A with pullup */
+ 0 22 0x1 0x1>; /* PA22 periph A with pullup */
+ };
+
+ pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 {
+ atmel,pins =
+ <0 23 0x1 0x1 /* PA23 periph A with pullup */
+ 0 24 0x1 0x1 /* PA24 periph A with pullup */
+ 0 25 0x1 0x1>; /* PA25 periph A with pullup */
+ };
+ };
+
+ pioA: gpio@fffff200 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff200 0x200>;
+ interrupts = <2 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioB: gpio@fffff400 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <3 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioC: gpio@fffff600 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x200>;
+ interrupts = <4 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioD: gpio@fffff800 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x200>;
+ interrupts = <4 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioE: gpio@fffffa00 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffffa00 0x200>;
+ interrupts = <4 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
dbgu: serial@ffffee00 {
compatible = "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
interrupts = <1 4 7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dbgu>;
status = "disabled";
};
@@ -152,6 +335,8 @@
interrupts = <7 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart0>;
status = "disabled";
};
@@ -161,6 +346,8 @@
interrupts = <8 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart1>;
status = "disabled";
};
@@ -170,6 +357,8 @@
interrupts = <9 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart2>;
status = "disabled";
};
@@ -177,6 +366,8 @@
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xfffbc000 0x100>;
interrupts = <21 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb_rmii>;
status = "disabled";
};
@@ -195,6 +386,24 @@
#size-cells = <0>;
status = "disabled";
};
+
+ mmc0: mmc@fff80000 {
+ compatible = "atmel,hsmci";
+ reg = <0xfff80000 0x600>;
+ interrupts = <10 4 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ mmc1: mmc@fff84000 {
+ compatible = "atmel,hsmci";
+ reg = <0xfff84000 0x600>;
+ interrupts = <11 4 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
nand0: nand@40000000 {
@@ -206,6 +415,8 @@
>;
atmel,nand-addr-offset = <21>;
atmel,nand-cmd-offset = <22>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
gpios = <&pioA 22 0
&pioD 15 0
0
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index f86ac4b..1eb0872 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -38,6 +38,10 @@
};
usart0: serial@fff8c000 {
+ pinctrl-0 = <
+ &pinctrl_usart0
+ &pinctrl_usart0_rts
+ &pinctrl_usart0_cts>;
status = "okay";
};
@@ -50,6 +54,31 @@
atmel,vbus-gpio = <&pioA 25 0>;
status = "okay";
};
+
+ mmc0: mmc@fff80000 {
+ pinctrl-0 = <
+ &pinctrl_board_mmc0
+ &pinctrl_mmc0_clk
+ &pinctrl_mmc0_slot0_cmd_dat0
+ &pinctrl_mmc0_slot0_dat1_3>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioE 18 0>;
+ wp-gpios = <&pioE 19 0>;
+ };
+ };
+
+ pinctrl@fffff200 {
+ mmc0 {
+ pinctrl_board_mmc0: mmc0-board {
+ atmel,pins =
+ <5 18 0x0 0x5 /* PE18 gpio CD pin pull up and deglitch */
+ 5 19 0x0 0x1>; /* PE19 gpio WP pin pull up */
+ };
+ };
+ };
};
nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi
new file mode 100644
index 0000000..fbe7a70
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g15.dtsi
@@ -0,0 +1,28 @@
+/*
+ * at91sam9g15.dtsi - Device Tree Include file for AT91SAM9G15 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/include/ "at91sam9x5.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9G15 SoC";
+ compatible = "atmel, at91sam9g15, atmel,at91sam9x5";
+
+ ahb {
+ apb {
+ pinctrl@fffff400 {
+ atmel,mux-mask = <
+ /* A B C */
+ 0xffffffff 0xffe0399f 0x00000000 /* pioA */
+ 0x00040000 0x00047e3f 0x00000000 /* pioB */
+ 0xfdffffff 0x00000000 0xb83fffff /* pioC */
+ 0x003fffff 0x003f8000 0x00000000 /* pioD */
+ >;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/at91sam9g15ek.dts
new file mode 100644
index 0000000..86dd3f6
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g15ek.dts
@@ -0,0 +1,16 @@
+/*
+ * at91sam9g15ek.dts - Device Tree file for AT91SAM9G15-EK board
+ *
+ * Copyright (C) 2012 Atmel,
+ * 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9g15.dtsi"
+/include/ "at91sam9x5ek.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9G25-EK";
+ compatible = "atmel,at91sam9g15ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
index f1b2e14..66467b1 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
+++ b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
@@ -12,6 +12,32 @@
model = "Atmel at91sam9g20ek 2 mmc";
compatible = "atmel,at91sam9g20ek_2mmc", "atmel,at91sam9g20", "atmel,at91sam9";
+ ahb {
+ apb{
+ mmc0: mmc@fffa8000 {
+ /* clk already mux wuth slot0 */
+ pinctrl-0 = <
+ &pinctrl_board_mmc0_slot0
+ &pinctrl_mmc0_slot0_cmd_dat0
+ &pinctrl_mmc0_slot0_dat1_3>;
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioC 2 0>;
+ };
+ };
+
+ pinctrl@fffff400 {
+ mmc0_slot0 {
+ pinctrl_board_mmc0_slot0: mmc0_slot0-board {
+ atmel,pins =
+ <2 2 0x0 0x5>; /* PC2 gpio CD pin pull up and deglitch */
+ };
+ };
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index e6391a4..32a500a 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -35,6 +35,13 @@
};
usart0: serial@fffb0000 {
+ pinctrl-0 =
+ <&pinctrl_usart0
+ &pinctrl_usart0_rts
+ &pinctrl_usart0_cts
+ &pinctrl_usart0_dtr_dsr
+ &pinctrl_usart0_dcd
+ &pinctrl_usart0_ri>;
status = "okay";
};
@@ -51,6 +58,29 @@
atmel,vbus-gpio = <&pioC 5 0>;
status = "okay";
};
+
+ mmc0: mmc@fffa8000 {
+ pinctrl-0 = <
+ &pinctrl_board_mmc0_slot1
+ &pinctrl_mmc0_clk
+ &pinctrl_mmc0_slot1_cmd_dat0
+ &pinctrl_mmc0_slot1_dat1_3>;
+ status = "okay";
+ slot@1 {
+ reg = <1>;
+ bus-width = <4>;
+ cd-gpios = <&pioC 9 0>;
+ };
+ };
+
+ pinctrl@fffff400 {
+ mmc0_slot1 {
+ pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+ atmel,pins =
+ <2 9 0x0 0x5>; /* PC9 gpio CD pin pull up and deglitch */
+ };
+ };
+ };
};
nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi
new file mode 100644
index 0000000..05a718f
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g25.dtsi
@@ -0,0 +1,28 @@
+/*
+ * at91sam9g25.dtsi - Device Tree Include file for AT91SAM9G25 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/include/ "at91sam9x5.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9G25 SoC";
+ compatible = "atmel, at91sam9g25, atmel,at91sam9x5";
+
+ ahb {
+ apb {
+ pinctrl@fffff400 {
+ atmel,mux-mask = <
+ /* A B C */
+ 0xffffffff 0xffe0399f 0xc000001c /* pioA */
+ 0x0007ffff 0x8000fe3f 0x00000000 /* pioB */
+ 0x80000000 0x07c0ffff 0xb83fffff /* pioC */
+ 0x003fffff 0x003f8000 0x00000000 /* pioD */
+ >;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
index 877c08f..c5ab16f 100644
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -7,55 +7,10 @@
* Licensed under GPLv2 or later.
*/
/dts-v1/;
-/include/ "at91sam9x5.dtsi"
-/include/ "at91sam9x5cm.dtsi"
+/include/ "at91sam9g25.dtsi"
+/include/ "at91sam9x5ek.dtsi"
/ {
model = "Atmel AT91SAM9G25-EK";
compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
-
- chosen {
- bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
- };
-
- ahb {
- apb {
- dbgu: serial@fffff200 {
- status = "okay";
- };
-
- usart0: serial@f801c000 {
- status = "okay";
- };
-
- macb0: ethernet@f802c000 {
- phy-mode = "rmii";
- status = "okay";
- };
-
- i2c0: i2c@f8010000 {
- status = "okay";
- };
-
- i2c1: i2c@f8014000 {
- status = "okay";
- };
-
- i2c2: i2c@f8018000 {
- status = "okay";
- };
- };
-
- usb0: ohci@00600000 {
- status = "okay";
- num-ports = <2>;
- atmel,vbus-gpio = <&pioD 19 1
- &pioD 20 1
- >;
- };
-
- usb1: ehci@00700000 {
- status = "okay";
- };
- };
};
diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi
new file mode 100644
index 0000000..f9d14a7
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g35.dtsi
@@ -0,0 +1,28 @@
+/*
+ * at91sam9g35.dtsi - Device Tree Include file for AT91SAM9G35 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/include/ "at91sam9x5.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9G35 SoC";
+ compatible = "atmel, at91sam9g35, atmel,at91sam9x5";
+
+ ahb {
+ apb {
+ pinctrl@fffff400 {
+ atmel,mux-mask = <
+ /* A B C */
+ 0xffffffff 0xffe0399f 0xc000000c /* pioA */
+ 0x000406ff 0x00047e3f 0x00000000 /* pioB */
+ 0xfdffffff 0x00000000 0xb83fffff /* pioC */
+ 0x003fffff 0x003f8000 0x00000000 /* pioD */
+ >;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/at91sam9g35ek.dts
new file mode 100644
index 0000000..95944bd
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g35ek.dts
@@ -0,0 +1,16 @@
+/*
+ * at91sam9g35ek.dts - Device Tree file for AT91SAM9G35-EK board
+ *
+ * Copyright (C) 2012 Atmel,
+ * 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9g35.dtsi"
+/include/ "at91sam9x5ek.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9G35-EK";
+ compatible = "atmel,at91sam9g35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 3add030..0741cae 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -108,60 +108,243 @@
interrupts = <21 4 0>;
};
- pioA: gpio@fffff200 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff200 0x100>;
- interrupts = <2 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ pinctrl@fffff200 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ ranges = <0xfffff200 0xfffff200 0xa00>;
+
+ atmel,mux-mask = <
+ /* A B */
+ 0xffffffff 0xffc003ff /* pioA */
+ 0xffffffff 0x800f8f00 /* pioB */
+ 0xffffffff 0x00000e00 /* pioC */
+ 0xffffffff 0xff0c1381 /* pioD */
+ 0xffffffff 0x81ffff81 /* pioE */
+ >;
+
+ /* shared pinctrl settings */
+ dbgu {
+ pinctrl_dbgu: dbgu-0 {
+ atmel,pins =
+ <1 12 0x1 0x0 /* PB12 periph A */
+ 1 13 0x1 0x0>; /* PB13 periph A */
+ };
+ };
- pioB: gpio@fffff400 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff400 0x100>;
- interrupts = <3 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ usart0 {
+ pinctrl_usart0: usart0-0 {
+ atmel,pins =
+ <1 19 0x1 0x1 /* PB19 periph A with pullup */
+ 1 18 0x1 0x0>; /* PB18 periph A */
+ };
+
+ pinctrl_usart0_rts: usart0_rts-0 {
+ atmel,pins =
+ <1 17 0x2 0x0>; /* PB17 periph B */
+ };
+
+ pinctrl_usart0_cts: usart0_cts-0 {
+ atmel,pins =
+ <1 15 0x2 0x0>; /* PB15 periph B */
+ };
+ };
- pioC: gpio@fffff600 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff600 0x100>;
- interrupts = <4 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ uart1 {
+ pinctrl_usart1: usart1-0 {
+ atmel,pins =
+ <1 4 0x1 0x1 /* PB4 periph A with pullup */
+ 1 5 0x1 0x0>; /* PB5 periph A */
+ };
+
+ pinctrl_usart1_rts: usart1_rts-0 {
+ atmel,pins =
+ <3 16 0x1 0x0>; /* PD16 periph A */
+ };
+
+ pinctrl_usart1_cts: usart1_cts-0 {
+ atmel,pins =
+ <3 17 0x1 0x0>; /* PD17 periph A */
+ };
+ };
- pioD: gpio@fffff800 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff800 0x100>;
- interrupts = <5 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ usart2 {
+ pinctrl_usart2: usart2-0 {
+ atmel,pins =
+ <1 6 0x1 0x1 /* PB6 periph A with pullup */
+ 1 7 0x1 0x0>; /* PB7 periph A */
+ };
+
+ pinctrl_usart2_rts: usart2_rts-0 {
+ atmel,pins =
+ <2 9 0x2 0x0>; /* PC9 periph B */
+ };
+
+ pinctrl_usart2_cts: usart2_cts-0 {
+ atmel,pins =
+ <2 11 0x2 0x0>; /* PC11 periph B */
+ };
+ };
- pioE: gpio@fffffa00 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffffa00 0x100>;
- interrupts = <5 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
+ usart3 {
+ pinctrl_usart3: usart3-0 {
+ atmel,pins =
+ <1 8 0x1 0x1 /* PB9 periph A with pullup */
+ 1 9 0x1 0x0>; /* PB8 periph A */
+ };
+
+ pinctrl_usart3_rts: usart3_rts-0 {
+ atmel,pins =
+ <0 23 0x2 0x0>; /* PA23 periph B */
+ };
+
+ pinctrl_usart3_cts: usart3_cts-0 {
+ atmel,pins =
+ <0 24 0x2 0x0>; /* PA24 periph B */
+ };
+ };
+
+ nand {
+ pinctrl_nand: nand-0 {
+ atmel,pins =
+ <2 8 0x0 0x1 /* PC8 gpio RDY pin pull_up*/
+ 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */
+ };
+ };
+
+ macb {
+ pinctrl_macb_rmii: macb_rmii-0 {
+ atmel,pins =
+ <0 10 0x1 0x0 /* PA10 periph A */
+ 0 11 0x1 0x0 /* PA11 periph A */
+ 0 12 0x1 0x0 /* PA12 periph A */
+ 0 13 0x1 0x0 /* PA13 periph A */
+ 0 14 0x1 0x0 /* PA14 periph A */
+ 0 15 0x1 0x0 /* PA15 periph A */
+ 0 16 0x1 0x0 /* PA16 periph A */
+ 0 17 0x1 0x0 /* PA17 periph A */
+ 0 18 0x1 0x0 /* PA18 periph A */
+ 0 19 0x1 0x0>; /* PA19 periph A */
+ };
+
+ pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+ atmel,pins =
+ <0 6 0x2 0x0 /* PA6 periph B */
+ 0 7 0x2 0x0 /* PA7 periph B */
+ 0 8 0x2 0x0 /* PA8 periph B */
+ 0 9 0x2 0x0 /* PA9 periph B */
+ 0 27 0x2 0x0 /* PA27 periph B */
+ 0 28 0x2 0x0 /* PA28 periph B */
+ 0 29 0x2 0x0 /* PA29 periph B */
+ 0 30 0x2 0x0>; /* PA30 periph B */
+ };
+ };
+
+ mmc0 {
+ pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+ atmel,pins =
+ <0 0 0x1 0x0 /* PA0 periph A */
+ 0 1 0x1 0x1 /* PA1 periph A with pullup */
+ 0 2 0x1 0x1>; /* PA2 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+ atmel,pins =
+ <0 3 0x1 0x1 /* PA3 periph A with pullup */
+ 0 4 0x1 0x1 /* PA4 periph A with pullup */
+ 0 5 0x1 0x1>; /* PA5 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
+ atmel,pins =
+ <0 6 0x1 0x1 /* PA6 periph A with pullup */
+ 0 7 0x1 0x1 /* PA7 periph A with pullup */
+ 0 8 0x1 0x1 /* PA8 periph A with pullup */
+ 0 9 0x1 0x1>; /* PA9 periph A with pullup */
+ };
+ };
+
+ mmc1 {
+ pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
+ atmel,pins =
+ <0 31 0x1 0x0 /* PA31 periph A */
+ 0 22 0x1 0x1 /* PA22 periph A with pullup */
+ 0 23 0x1 0x1>; /* PA23 periph A with pullup */
+ };
+
+ pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+ atmel,pins =
+ <0 24 0x1 0x1 /* PA24 periph A with pullup */
+ 0 25 0x1 0x1 /* PA25 periph A with pullup */
+ 0 26 0x1 0x1>; /* PA26 periph A with pullup */
+ };
+
+ pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 {
+ atmel,pins =
+ <0 27 0x1 0x1 /* PA27 periph A with pullup */
+ 0 28 0x1 0x1 /* PA28 periph A with pullup */
+ 0 29 0x1 0x1 /* PA29 periph A with pullup */
+ 0 20 0x1 0x1>; /* PA30 periph A with pullup */
+ };
+ };
+
+ pioA: gpio@fffff200 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff200 0x200>;
+ interrupts = <2 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioB: gpio@fffff400 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <3 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioC: gpio@fffff600 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x200>;
+ interrupts = <4 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioD: gpio@fffff800 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x200>;
+ interrupts = <5 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioE: gpio@fffffa00 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffffa00 0x200>;
+ interrupts = <5 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
dbgu: serial@ffffee00 {
compatible = "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
interrupts = <1 4 7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dbgu>;
status = "disabled";
};
@@ -171,6 +354,8 @@
interrupts = <7 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart0>;
status = "disabled";
};
@@ -180,6 +365,8 @@
interrupts = <8 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart1>;
status = "disabled";
};
@@ -189,6 +376,8 @@
interrupts = <9 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart2>;
status = "disabled";
};
@@ -198,6 +387,8 @@
interrupts = <10 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart3>;
status = "disabled";
};
@@ -205,6 +396,8 @@
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xfffbc000 0x100>;
interrupts = <25 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb_rmii>;
status = "disabled";
};
@@ -262,6 +455,24 @@
trigger-value = <0x6>;
};
};
+
+ mmc0: mmc@fff80000 {
+ compatible = "atmel,hsmci";
+ reg = <0xfff80000 0x600>;
+ interrupts = <11 4 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ mmc1: mmc@fffd0000 {
+ compatible = "atmel,hsmci";
+ reg = <0xfffd0000 0x600>;
+ interrupts = <29 4 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
nand0: nand@40000000 {
@@ -273,6 +484,8 @@
>;
atmel,nand-addr-offset = <21>;
atmel,nand-cmd-offset = <22>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
gpios = <&pioC 8 0
&pioC 14 0
0
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 15e1dd4..20c3191 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -39,6 +39,10 @@
};
usart1: serial@fff90000 {
+ pinctrl-0 =
+ <&pinctrl_usart1
+ &pinctrl_usart1_rts
+ &pinctrl_usart1_cts>;
status = "okay";
};
@@ -54,6 +58,50 @@
i2c1: i2c@fff88000 {
status = "okay";
};
+
+ mmc0: mmc@fff80000 {
+ pinctrl-0 = <
+ &pinctrl_board_mmc0
+ &pinctrl_mmc0_slot0_clk_cmd_dat0
+ &pinctrl_mmc0_slot0_dat1_3>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 10 0>;
+ };
+ };
+
+ mmc1: mmc@fffd0000 {
+ pinctrl-0 = <
+ &pinctrl_board_mmc1
+ &pinctrl_mmc1_slot0_clk_cmd_dat0
+ &pinctrl_mmc1_slot0_dat1_3>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 11 0>;
+ wp-gpios = <&pioD 29 0>;
+ };
+ };
+
+ pinctrl@fffff200 {
+ mmc0 {
+ pinctrl_board_mmc0: mmc0-board {
+ atmel,pins =
+ <3 10 0x0 0x5>; /* PD10 gpio CD pin pull up and deglitch */
+ };
+ };
+
+ mmc1 {
+ pinctrl_board_mmc1: mmc1-board {
+ atmel,pins =
+ <3 11 0x0 0x5 /* PD11 gpio CD pin pull up and deglitch */
+ 3 29 0x0 0x1>; /* PD29 gpio WP pin pull up */
+ };
+ };
+ };
};
nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 82508d6..e9efb34 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -84,6 +84,15 @@
reg = <0xfffffe10 0x10>;
};
+ mmc0: mmc@f0008000 {
+ compatible = "atmel,hsmci";
+ reg = <0xf0008000 0x600>;
+ interrupts = <12 4 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
tcb0: timer@f8008000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf8008000 0x100>;
@@ -102,50 +111,186 @@
interrupts = <20 4 0>;
};
- pioA: gpio@fffff400 {
- compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
- reg = <0xfffff400 0x100>;
- interrupts = <2 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ pinctrl@fffff400 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+ ranges = <0xfffff400 0xfffff400 0x800>;
- pioB: gpio@fffff600 {
- compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
- reg = <0xfffff600 0x100>;
- interrupts = <2 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ atmel,mux-mask = <
+ /* A B C */
+ 0xffffffff 0xffe07983 0x00000000 /* pioA */
+ 0x00040000 0x00047e0f 0x00000000 /* pioB */
+ 0xfdffffff 0x07c00000 0xb83fffff /* pioC */
+ 0x003fffff 0x003f8000 0x00000000 /* pioD */
+ >;
- pioC: gpio@fffff800 {
- compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
- reg = <0xfffff800 0x100>;
- interrupts = <3 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ /* shared pinctrl settings */
+ dbgu {
+ pinctrl_dbgu: dbgu-0 {
+ atmel,pins =
+ <0 9 0x1 0x0 /* PA9 periph A */
+ 0 10 0x1 0x1>; /* PA10 periph with pullup */
+ };
+ };
- pioD: gpio@fffffa00 {
- compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
- reg = <0xfffffa00 0x100>;
- interrupts = <3 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
+ usart0 {
+ pinctrl_usart0: usart0-0 {
+ atmel,pins =
+ <0 1 0x1 0x1 /* PA1 periph A with pullup */
+ 0 0 0x1 0x0>; /* PA0 periph A */
+ };
+
+ pinctrl_usart0_rts: usart0_rts-0 {
+ atmel,pins =
+ <0 2 0x1 0x0>; /* PA2 periph A */
+ };
+
+ pinctrl_usart0_cts: usart0_cts-0 {
+ atmel,pins =
+ <0 3 0x1 0x0>; /* PA3 periph A */
+ };
+ };
+
+ usart1 {
+ pinctrl_usart1: usart1-0 {
+ atmel,pins =
+ <0 6 0x1 0x1 /* PA6 periph A with pullup */
+ 0 5 0x1 0x0>; /* PA5 periph A */
+ };
+ };
+
+ usart2 {
+ pinctrl_usart2: usart2-0 {
+ atmel,pins =
+ <0 8 0x1 0x1 /* PA8 periph A with pullup */
+ 0 7 0x1 0x0>; /* PA7 periph A */
+ };
+
+ pinctrl_usart2_rts: usart2_rts-0 {
+ atmel,pins =
+ <1 0 0x2 0x0>; /* PB0 periph B */
+ };
+
+ pinctrl_usart2_cts: usart2_cts-0 {
+ atmel,pins =
+ <1 1 0x2 0x0>; /* PB1 periph B */
+ };
+ };
+
+ usart3 {
+ pinctrl_usart3: usart3-0 {
+ atmel,pins =
+ <2 23 0x2 0x1 /* PC23 periph B with pullup */
+ 2 22 0x2 0x0>; /* PC22 periph B */
+ };
+
+ pinctrl_usart3_rts: usart3_rts-0 {
+ atmel,pins =
+ <2 24 0x2 0x0>; /* PC24 periph B */
+ };
+
+ pinctrl_usart3_cts: usart3_cts-0 {
+ atmel,pins =
+ <2 25 0x2 0x0>; /* PC25 periph B */
+ };
+ };
+
+ uart0 {
+ pinctrl_uart0: uart0-0 {
+ atmel,pins =
+ <2 9 0x3 0x1 /* PC9 periph C with pullup */
+ 2 8 0x3 0x0>; /* PC8 periph C */
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1: uart1-0 {
+ atmel,pins =
+ <2 16 0x3 0x1 /* PC17 periph C with pullup */
+ 2 17 0x3 0x0>; /* PC16 periph C */
+ };
+ };
+
+ nand {
+ pinctrl_nand: nand-0 {
+ atmel,pins =
+ <3 5 0x0 0x1 /* PD5 gpio RDY pin pull_up*/
+ 3 4 0x0 0x1>; /* PD4 gpio enable pin pull_up */
+ };
+ };
+
+ mmc0 {
+ pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+ atmel,pins =
+ <0 17 0x1 0x0 /* PA17 periph A */
+ 0 16 0x1 0x1 /* PA16 periph A with pullup */
+ 0 15 0x1 0x1>; /* PA15 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+ atmel,pins =
+ <0 18 0x1 0x1 /* PA18 periph A with pullup */
+ 0 19 0x1 0x1 /* PA19 periph A with pullup */
+ 0 20 0x1 0x1>; /* PA20 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
+ atmel,pins =
+ <0 11 0x2 0x1 /* PA11 periph B with pullup */
+ 0 12 0x2 0x1 /* PA12 periph B with pullup */
+ 0 13 0x2 0x1 /* PA13 periph B with pullup */
+ 0 14 0x2 0x1>; /* PA14 periph B with pullup */
+ };
+ };
+
+ pioA: gpio@fffff400 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <2 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioB: gpio@fffff600 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x200>;
+ interrupts = <2 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioC: gpio@fffff800 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x200>;
+ interrupts = <3 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioD: gpio@fffffa00 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffffa00 0x200>;
+ interrupts = <3 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 4 7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dbgu>;
status = "disabled";
};
@@ -155,6 +300,8 @@
interrupts = <5 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart0>;
status = "disabled";
};
@@ -164,6 +311,8 @@
interrupts = <6 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart1>;
status = "disabled";
};
@@ -173,6 +322,8 @@
interrupts = <7 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart2>;
status = "disabled";
};
@@ -182,6 +333,8 @@
interrupts = <8 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart3>;
status = "disabled";
};
@@ -215,6 +368,8 @@
>;
atmel,nand-addr-offset = <21>;
atmel,nand-cmd-offset = <22>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
gpios = <&pioD 5 0
&pioD 4 0
0
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index 912b2c2..0376bf4 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -45,6 +45,28 @@
i2c1: i2c@f8014000 {
status = "okay";
};
+
+ mmc0: mmc@f0008000 {
+ pinctrl-0 = <
+ &pinctrl_board_mmc0
+ &pinctrl_mmc0_slot0_clk_cmd_dat0
+ &pinctrl_mmc0_slot0_dat1_3>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioA 7 0>;
+ };
+ };
+
+ pinctrl@fffff400 {
+ mmc0 {
+ pinctrl_board_mmc0: mmc0-board {
+ atmel,pins =
+ <0 7 0x0 0x5>; /* PA7 gpio CD pin pull up and deglitch */
+ };
+ };
+ };
};
nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi
new file mode 100644
index 0000000..54eb33b
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x25.dtsi
@@ -0,0 +1,49 @@
+/*
+ * at91sam9x25.dtsi - Device Tree Include file for AT91SAM9X25 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/include/ "at91sam9x5.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9X25 SoC";
+ compatible = "atmel, at91sam9x25, atmel,at91sam9x5";
+
+ ahb {
+ apb {
+ pinctrl@fffff400 {
+ atmel,mux-mask = <
+ /* A B C */
+ 0xffffffff 0xffe03fff 0xc000001c /* pioA */
+ 0x0007ffff 0x00047e3f 0x00000000 /* pioB */
+ 0x80000000 0xfffd0000 0xb83fffff /* pioC */
+ 0x003fffff 0x003f8000 0x00000000 /* pioD */
+ >;
+
+ macb1 {
+ pinctrl_macb1_rmii: macb1_rmii-0 {
+ atmel,pins =
+ <2 16 0x2 0x0 /* PC16 periph B */
+ 2 18 0x2 0x0 /* PC18 periph B */
+ 2 19 0x2 0x0 /* PC19 periph B */
+ 2 20 0x2 0x0 /* PC20 periph B */
+ 2 21 0x2 0x0 /* PC21 periph B */
+ 2 27 0x2 0x0 /* PC27 periph B */
+ 2 28 0x2 0x0 /* PC28 periph B */
+ 2 29 0x2 0x0 /* PC29 periph B */
+ 2 30 0x2 0x0 /* PC30 periph B */
+ 2 31 0x2 0x0>; /* PC31 periph B */
+ };
+ };
+ };
+
+ macb1: ethernet@f8030000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb1_rmii>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts
new file mode 100644
index 0000000..af907ea
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x25ek.dts
@@ -0,0 +1,16 @@
+/*
+ * at91sam9x25ek.dts - Device Tree file for AT91SAM9X25-EK board
+ *
+ * Copyright (C) 2012 Atmel,
+ * 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9x25.dtsi"
+/include/ "at91sam9x5ek.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9G25-EK";
+ compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi
new file mode 100644
index 0000000..fb102d6
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x35.dtsi
@@ -0,0 +1,28 @@
+/*
+ * at91sam9x35.dtsi - Device Tree Include file for AT91SAM9X35 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/include/ "at91sam9x5.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9X35 SoC";
+ compatible = "atmel, at91sam9x35, atmel,at91sam9x5";
+
+ ahb {
+ apb {
+ pinctrl@fffff400 {
+ atmel,mux-mask = <
+ /* A B C */
+ 0xffffffff 0xffe03fff 0xc000000c /* pioA */
+ 0x000406ff 0x00047e3f 0x00000000 /* pioB */
+ 0xfdffffff 0x00000000 0xb83fffff /* pioC */
+ 0x003fffff 0x003f8000 0x00000000 /* pioD */
+ >;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts
new file mode 100644
index 0000000..5ccb607
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x35ek.dts
@@ -0,0 +1,16 @@
+/*
+ * at91sam9x35ek.dts - Device Tree file for AT91SAM9X35-EK board
+ *
+ * Copyright (C) 2012 Atmel,
+ * 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9x35.dtsi"
+/include/ "at91sam9x5ek.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9X35-EK";
+ compatible = "atmel,at91sam9x35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 03fc136..7ee49e8d 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -111,50 +111,244 @@
interrupts = <21 4 0>;
};
- pioA: gpio@fffff400 {
- compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
- reg = <0xfffff400 0x100>;
- interrupts = <2 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ pinctrl@fffff400 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+ ranges = <0xfffff400 0xfffff400 0x800>;
+
+ /* shared pinctrl settings */
+ dbgu {
+ pinctrl_dbgu: dbgu-0 {
+ atmel,pins =
+ <0 9 0x1 0x0 /* PA9 periph A */
+ 0 10 0x1 0x1>; /* PA10 periph A with pullup */
+ };
+ };
- pioB: gpio@fffff600 {
- compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
- reg = <0xfffff600 0x100>;
- interrupts = <2 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
+ usart0 {
+ pinctrl_usart0: usart0-0 {
+ atmel,pins =
+ <0 0 0x1 0x1 /* PA0 periph A with pullup */
+ 0 1 0x1 0x0>; /* PA1 periph A */
+ };
+
+ pinctrl_usart0_rts: usart0_rts-0 {
+ atmel,pins =
+ <0 2 0x1 0x0>; /* PA2 periph A */
+ };
+
+ pinctrl_usart0_cts: usart0_cts-0 {
+ atmel,pins =
+ <0 3 0x1 0x0>; /* PA3 periph A */
+ };
+ };
+
+ usart1 {
+ pinctrl_usart1: usart1-0 {
+ atmel,pins =
+ <0 5 0x1 0x1 /* PA5 periph A with pullup */
+ 0 6 0x1 0x0>; /* PA6 periph A */
+ };
+
+ pinctrl_usart1_rts: usart1_rts-0 {
+ atmel,pins =
+ <3 27 0x3 0x0>; /* PC27 periph C */
+ };
+
+ pinctrl_usart1_cts: usart1_cts-0 {
+ atmel,pins =
+ <3 28 0x3 0x0>; /* PC28 periph C */
+ };
+ };
+
+ usart2 {
+ pinctrl_usart2: usart2-0 {
+ atmel,pins =
+ <0 7 0x1 0x1 /* PA7 periph A with pullup */
+ 0 8 0x1 0x0>; /* PA8 periph A */
+ };
+
+ pinctrl_uart2_rts: uart2_rts-0 {
+ atmel,pins =
+ <0 0 0x2 0x0>; /* PB0 periph B */
+ };
+
+ pinctrl_uart2_cts: uart2_cts-0 {
+ atmel,pins =
+ <0 1 0x2 0x0>; /* PB1 periph B */
+ };
+ };
+
+ usart3 {
+ pinctrl_uart3: usart3-0 {
+ atmel,pins =
+ <3 23 0x2 0x1 /* PC22 periph B with pullup */
+ 3 23 0x2 0x0>; /* PC23 periph B */
+ };
+
+ pinctrl_usart3_rts: usart3_rts-0 {
+ atmel,pins =
+ <3 24 0x2 0x0>; /* PC24 periph B */
+ };
+
+ pinctrl_usart3_cts: usart3_cts-0 {
+ atmel,pins =
+ <3 25 0x2 0x0>; /* PC25 periph B */
+ };
+ };
+
+ uart0 {
+ pinctrl_uart0: uart0-0 {
+ atmel,pins =
+ <3 8 0x3 0x0 /* PC8 periph C */
+ 3 9 0x3 0x1>; /* PC9 periph C with pullup */
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1: uart1-0 {
+ atmel,pins =
+ <3 16 0x3 0x0 /* PC16 periph C */
+ 3 17 0x3 0x1>; /* PC17 periph C with pullup */
+ };
+ };
+
+ nand {
+ pinctrl_nand: nand-0 {
+ atmel,pins =
+ <3 4 0x0 0x1 /* PD5 gpio RDY pin pull_up */
+ 3 5 0x0 0x1>; /* PD4 gpio enable pin pull_up */
+ };
+ };
+
+ macb0 {
+ pinctrl_macb0_rmii: macb0_rmii-0 {
+ atmel,pins =
+ <1 0 0x1 0x0 /* PB0 periph A */
+ 1 1 0x1 0x0 /* PB1 periph A */
+ 1 2 0x1 0x0 /* PB2 periph A */
+ 1 3 0x1 0x0 /* PB3 periph A */
+ 1 4 0x1 0x0 /* PB4 periph A */
+ 1 5 0x1 0x0 /* PB5 periph A */
+ 1 6 0x1 0x0 /* PB6 periph A */
+ 1 7 0x1 0x0 /* PB7 periph A */
+ 1 9 0x1 0x0 /* PB9 periph A */
+ 1 10 0x1 0x0>; /* PB10 periph A */
+ };
+
+ pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
+ atmel,pins =
+ <1 8 0x1 0x0 /* PA8 periph A */
+ 1 11 0x1 0x0 /* PA11 periph A */
+ 1 12 0x1 0x0 /* PA12 periph A */
+ 1 13 0x1 0x0 /* PA13 periph A */
+ 1 14 0x1 0x0 /* PA14 periph A */
+ 1 15 0x1 0x0 /* PA15 periph A */
+ 1 16 0x1 0x0 /* PA16 periph A */
+ 1 17 0x1 0x0>; /* PA17 periph A */
+ };
+ };
+
+ mmc0 {
+ pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+ atmel,pins =
+ <0 17 0x1 0x0 /* PA17 periph A */
+ 0 16 0x1 0x1 /* PA16 periph A with pullup */
+ 0 15 0x1 0x1>; /* PA15 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+ atmel,pins =
+ <0 18 0x1 0x1 /* PA18 periph A with pullup */
+ 0 19 0x1 0x1 /* PA19 periph A with pullup */
+ 0 20 0x1 0x1>; /* PA20 periph A with pullup */
+ };
+ };
+
+ mmc1 {
+ pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
+ atmel,pins =
+ <0 13 0x2 0x0 /* PA13 periph B */
+ 0 12 0x2 0x1 /* PA12 periph B with pullup */
+ 0 11 0x2 0x1>; /* PA11 periph B with pullup */
+ };
+
+ pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+ atmel,pins =
+ <0 2 0x2 0x1 /* PA2 periph B with pullup */
+ 0 3 0x2 0x1 /* PA3 periph B with pullup */
+ 0 4 0x2 0x1>; /* PA4 periph B with pullup */
+ };
+ };
+
+ pioA: gpio@fffff400 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <2 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioB: gpio@fffff600 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x200>;
+ interrupts = <2 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #gpio-lines = <19>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioC: gpio@fffff800 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x200>;
+ interrupts = <3 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioD: gpio@fffffa00 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffffa00 0x200>;
+ interrupts = <3 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #gpio-lines = <22>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
- pioC: gpio@fffff800 {
- compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
- reg = <0xfffff800 0x100>;
- interrupts = <3 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
+ mmc0: mmc@f0008000 {
+ compatible = "atmel,hsmci";
+ reg = <0xf0008000 0x600>;
+ interrupts = <12 4 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
};
- pioD: gpio@fffffa00 {
- compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
- reg = <0xfffffa00 0x100>;
- interrupts = <3 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
+ mmc1: mmc@f000c000 {
+ compatible = "atmel,hsmci";
+ reg = <0xf000c000 0x600>;
+ interrupts = <26 4 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
};
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 4 7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dbgu>;
status = "disabled";
};
@@ -164,6 +358,8 @@
interrupts = <5 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart0>;
status = "disabled";
};
@@ -173,6 +369,8 @@
interrupts = <6 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart1>;
status = "disabled";
};
@@ -182,6 +380,8 @@
interrupts = <7 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart2>;
status = "disabled";
};
@@ -189,6 +389,8 @@
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xf802c000 0x100>;
interrupts = <24 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb0_rmii>;
status = "disabled";
};
@@ -273,6 +475,8 @@
>;
atmel,nand-addr-offset = <21>;
atmel,nand-cmd-offset = <22>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
gpios = <&pioD 5 0
&pioD 4 0
0
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
new file mode 100644
index 0000000..8a7cf1d
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -0,0 +1,101 @@
+/*
+ * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board
+ *
+ * Copyright (C) 2012 Atmel,
+ * 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/include/ "at91sam9x5cm.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9X5-EK";
+ compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+ };
+
+ ahb {
+ apb {
+ mmc0: mmc@f0008000 {
+ pinctrl-0 = <
+ &pinctrl_board_mmc0
+ &pinctrl_mmc0_slot0_clk_cmd_dat0
+ &pinctrl_mmc0_slot0_dat1_3>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 15 0>;
+ };
+ };
+
+ mmc1: mmc@f000c000 {
+ pinctrl-0 = <
+ &pinctrl_board_mmc1
+ &pinctrl_mmc1_slot0_clk_cmd_dat0
+ &pinctrl_mmc1_slot0_dat1_3>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 14 0>;
+ };
+ };
+
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+
+ usart0: serial@f801c000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@f802c000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ i2c0: i2c@f8010000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@f8014000 {
+ status = "okay";
+ };
+
+ i2c2: i2c@f8018000 {
+ status = "okay";
+ };
+
+ pinctrl@fffff400 {
+ mmc0 {
+ pinctrl_board_mmc0: mmc0-board {
+ atmel,pins =
+ <3 15 0x0 0x5>; /* PD15 gpio CD pin pull up and deglitch */
+ };
+ };
+
+ mmc1 {
+ pinctrl_board_mmc1: mmc1-board {
+ atmel,pins =
+ <3 14 0x0 0x5>; /* PD14 gpio CD pin pull up and deglitch */
+ };
+ };
+ };
+ };
+
+ usb0: ohci@00600000 {
+ status = "okay";
+ num-ports = <2>;
+ atmel,vbus-gpio = <&pioD 19 1
+ &pioD 20 1
+ >;
+ };
+
+ usb1: ehci@00700000 {
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts
new file mode 100644
index 0000000..387fedb
--- /dev/null
+++ b/arch/arm/boot/dts/pm9g45.dts
@@ -0,0 +1,165 @@
+/*
+ * pm9g45.dts - Device Tree file for Ronetix pm9g45 board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+/include/ "at91sam9g45.dtsi"
+
+/ {
+ model = "Ronetix pm9g45";
+ compatible = "ronetix,pm9g45", "atmel,at91sam9g45", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x70000000 0x8000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@ffffee00 {
+ status = "okay";
+ };
+
+ pinctrl@fffff200 {
+
+ board {
+ pinctrl_board_nand: nand0-board {
+ atmel,pins =
+ <3 3 0x0 0x1 /* PD3 gpio RDY pin pull_up*/
+ 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */
+ };
+ };
+
+ mmc {
+ pinctrl_board_mmc: mmc0-board {
+ atmel,pins =
+ <3 6 0x0 0x5>; /* PD6 gpio CD pin pull_up and deglitch */
+ };
+ };
+ };
+
+ mmc0: mmc@fff80000 {
+ pinctrl-0 = <
+ &pinctrl_board_mmc
+ &pinctrl_mmc0_slot0_clk_cmd_dat0
+ &pinctrl_mmc0_slot0_dat1_3>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 6 0>;
+ };
+ };
+
+ macb0: ethernet@fffbc000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ pinctrl-0 = <&pinctrl_board_nand>;
+
+ gpios = <&pioD 3 0
+ &pioC 14 0
+ 0
+ >;
+
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ barebox@20000 {
+ label = "barebox";
+ reg = <0x20000 0x40000>;
+ };
+
+ bareboxenv@60000 {
+ label = "bareboxenv";
+ reg = <0x60000 0x1A0000>;
+ };
+
+ kernel@200000 {
+ label = "bareboxenv2";
+ reg = <0x200000 0x300000>;
+ };
+
+ kernel@500000 {
+ label = "root";
+ reg = <0x500000 0x400000>;
+ };
+
+ data@900000 {
+ label = "data";
+ reg = <0x900000 0x8340000>;
+ };
+ };
+
+ usb0: ohci@00700000 {
+ status = "okay";
+ num-ports = <2>;
+ };
+
+ usb1: ehci@00800000 {
+ status = "okay";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led0 {
+ label = "led0";
+ gpios = <&pioD 0 1>;
+ linux,default-trigger = "nand-disk";
+ };
+
+ led1 {
+ label = "led1";
+ gpios = <&pioD 31 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ right {
+ label = "SW4";
+ gpios = <&pioE 7 1>;
+ linux,code = <106>;
+ };
+
+ up {
+ label = "SW3";
+ gpios = <&pioE 8 1>;
+ linux,code = <103>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
index dd4358b..2e4c572 100644
--- a/arch/arm/boot/dts/spear1310-evb.dts
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -181,6 +181,10 @@
status = "okay";
};
+ gpio@d8400000 {
+ status = "okay";
+ };
+
i2c0: i2c@e0280000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi
index 419ea74..7cd25eb 100644
--- a/arch/arm/boot/dts/spear1310.dtsi
+++ b/arch/arm/boot/dts/spear1310.dtsi
@@ -70,6 +70,12 @@
status = "disabled";
};
+ pinmux: pinmux@e0700000 {
+ compatible = "st,spear1310-pinmux";
+ reg = <0xe0700000 0x1000>;
+ #gpio-range-cells = <2>;
+ };
+
spi1: spi@5d400000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x5d400000 0x1000>;
@@ -179,6 +185,27 @@
thermal@e07008c4 {
st,thermal-flags = <0x7000>;
};
+
+ gpiopinctrl: gpio@d8400000 {
+ compatible = "st,spear-plgpio";
+ reg = <0xd8400000 0x1000>;
+ interrupts = <0 100 0x4>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinmux 0 246>;
+ status = "disabled";
+
+ st-plgpio,ngpio = <246>;
+ st-plgpio,enb-reg = <0xd0>;
+ st-plgpio,wdata-reg = <0x90>;
+ st-plgpio,dir-reg = <0xb0>;
+ st-plgpio,ie-reg = <0x30>;
+ st-plgpio,rdata-reg = <0x70>;
+ st-plgpio,mis-reg = <0x10>;
+ st-plgpio,eit-reg = <0x50>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts
index c9a54e0..045f712 100644
--- a/arch/arm/boot/dts/spear1340-evb.dts
+++ b/arch/arm/boot/dts/spear1340-evb.dts
@@ -193,6 +193,10 @@
status = "okay";
};
+ gpio@e2800000 {
+ status = "okay";
+ };
+
i2c0: i2c@e0280000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
index d71fe2a..6c09eb0 100644
--- a/arch/arm/boot/dts/spear1340.dtsi
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -24,6 +24,12 @@
status = "disabled";
};
+ pinmux: pinmux@e0700000 {
+ compatible = "st,spear1340-pinmux";
+ reg = <0xe0700000 0x1000>;
+ #gpio-range-cells = <2>;
+ };
+
spi1: spi@5d400000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x5d400000 0x1000>;
@@ -51,6 +57,26 @@
thermal@e07008c4 {
st,thermal-flags = <0x2a00>;
};
+
+ gpiopinctrl: gpio@e2800000 {
+ compatible = "st,spear-plgpio";
+ reg = <0xe2800000 0x1000>;
+ interrupts = <0 107 0x4>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinmux 0 252>;
+ status = "disabled";
+
+ st-plgpio,ngpio = <250>;
+ st-plgpio,wdata-reg = <0x40>;
+ st-plgpio,dir-reg = <0x00>;
+ st-plgpio,ie-reg = <0x80>;
+ st-plgpio,rdata-reg = <0x20>;
+ st-plgpio,mis-reg = <0xa0>;
+ st-plgpio,eit-reg = <0x60>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi
index 62fc4fb..930303e 100644
--- a/arch/arm/boot/dts/spear310.dtsi
+++ b/arch/arm/boot/dts/spear310.dtsi
@@ -22,9 +22,10 @@
0xb0000000 0xb0000000 0x10000000
0xd0000000 0xd0000000 0x30000000>;
- pinmux@b4000000 {
+ pinmux: pinmux@b4000000 {
compatible = "st,spear310-pinmux";
reg = <0xb4000000 0x1000>;
+ #gpio-range-cells = <2>;
};
fsmc: flash@44000000 {
@@ -75,6 +76,25 @@
reg = <0xb2200000 0x1000>;
status = "disabled";
};
+
+ gpiopinctrl: gpio@b4000000 {
+ compatible = "st,spear-plgpio";
+ reg = <0xb4000000 0x1000>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinmux 0 102>;
+ status = "disabled";
+
+ st-plgpio,ngpio = <102>;
+ st-plgpio,enb-reg = <0x10>;
+ st-plgpio,wdata-reg = <0x20>;
+ st-plgpio,dir-reg = <0x30>;
+ st-plgpio,ie-reg = <0x50>;
+ st-plgpio,rdata-reg = <0x40>;
+ st-plgpio,mis-reg = <0x60>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts
index 082328b..ad4bfc6 100644
--- a/arch/arm/boot/dts/spear320-evb.dts
+++ b/arch/arm/boot/dts/spear320-evb.dts
@@ -164,6 +164,10 @@
status = "okay";
};
+ gpio@b3000000 {
+ status = "okay";
+ };
+
i2c0: i2c@d0180000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi
index 1f49d69..67d7ada 100644
--- a/arch/arm/boot/dts/spear320.dtsi
+++ b/arch/arm/boot/dts/spear320.dtsi
@@ -21,9 +21,10 @@
ranges = <0x40000000 0x40000000 0x80000000
0xd0000000 0xd0000000 0x30000000>;
- pinmux@b3000000 {
+ pinmux: pinmux@b3000000 {
compatible = "st,spear320-pinmux";
reg = <0xb3000000 0x1000>;
+ #gpio-range-cells = <2>;
};
clcd@90000000 {
@@ -90,6 +91,26 @@
reg = <0xa4000000 0x1000>;
status = "disabled";
};
+
+ gpiopinctrl: gpio@b3000000 {
+ compatible = "st,spear-plgpio";
+ reg = <0xb3000000 0x1000>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinmux 0 102>;
+ status = "disabled";
+
+ st-plgpio,ngpio = <102>;
+ st-plgpio,enb-reg = <0x24>;
+ st-plgpio,wdata-reg = <0x34>;
+ st-plgpio,dir-reg = <0x44>;
+ st-plgpio,ie-reg = <0x64>;
+ st-plgpio,rdata-reg = <0x54>;
+ st-plgpio,mis-reg = <0x84>;
+ st-plgpio,eit-reg = <0x94>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index f0ba901..a20d4ff 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -523,12 +523,12 @@
};
temperature-sensor@4c {
- compatible = "nct1008";
+ compatible = "onnn,nct1008";
reg = <0x4c>;
};
magnetometer@c {
- compatible = "ak8975";
+ compatible = "ak,ak8975";
reg = <0xc>;
interrupt-parent = <&gpio>;
interrupts = <109 0x04>; /* gpio PN5 */
diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c
index df13a3f..9d2d3ba 100644
--- a/arch/arm/common/timer-sp.c
+++ b/arch/arm/common/timer-sp.c
@@ -162,7 +162,6 @@ static struct clock_event_device sp804_clockevent = {
.set_mode = sp804_set_mode,
.set_next_event = sp804_set_next_event,
.rating = 300,
- .cpumask = cpu_all_mask,
};
static struct irqaction sp804_timer_irq = {
@@ -185,6 +184,7 @@ void __init sp804_clockevents_init(void __iomem *base, unsigned int irq,
clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
evt->name = name;
evt->irq = irq;
+ evt->cpumask = cpu_possible_mask;
setup_irq(irq, &sp804_timer_irq);
clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 67bc571..b175577 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -111,6 +111,7 @@ CONFIG_I2C=y
CONFIG_I2C_GPIO=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
+CONFIG_PINCTRL_AT91=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_AT91SAM9X_WATCHDOG=y
diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h
index 6b9b077..afd7e91 100644
--- a/arch/arm/include/asm/hardware/sp810.h
+++ b/arch/arm/include/asm/hardware/sp810.h
@@ -56,6 +56,8 @@
#define SCCTRL_TIMEREN1SEL_REFCLK (0 << 17)
#define SCCTRL_TIMEREN1SEL_TIMCLK (1 << 17)
+#define SCCTRL_TIMERENnSEL_SHIFT(n) (15 + ((n) * 2))
+
static inline void sysctl_soft_reset(void __iomem *base)
{
/* switch to slow mode */
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 42f042e..652b560 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -374,7 +374,7 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
#ifdef CONFIG_MMU
#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
-extern int valid_phys_addr_range(unsigned long addr, size_t size);
+extern int valid_phys_addr_range(phys_addr_t addr, size_t size);
extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
extern int devmem_is_allowed(unsigned long pfn);
#endif
diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h
index aeae9c6..6d65ba2 100644
--- a/arch/arm/include/asm/prom.h
+++ b/arch/arm/include/asm/prom.h
@@ -11,6 +11,8 @@
#ifndef __ASMARM_PROM_H
#define __ASMARM_PROM_H
+#define HAVE_ARCH_DEVTREE_FIXUPS
+
#ifdef CONFIG_OF
extern struct machine_desc *setup_machine_fdt(unsigned int dt_phys);
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 0436242..e34c1bd 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -494,8 +494,17 @@ endif
comment "Generic Board Type"
+config MACH_AT91RM9200_DT
+ bool "Atmel AT91RM9200 Evaluation Kits with device-tree support"
+ depends on SOC_AT91RM9200
+ select USE_OF
+ help
+ Select this if you want to experiment device-tree with
+ an Atmel RM9200 Evaluation Kit.
+
config MACH_AT91SAM_DT
bool "Atmel AT91SAM Evaluation Kits with device-tree support"
+ depends on SOC_AT91SAM9
select USE_OF
help
Select this if you want to experiment device-tree with
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 3bb7a51..b38a1dc 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -88,6 +88,7 @@ obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o
obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
# AT91SAM board with device-tree
+obj-$(CONFIG_MACH_AT91RM9200_DT) += board-rm9200-dt.o
obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o
# AT91X40 board-specific support
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 5269825..6cceb42 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -194,6 +194,24 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_ID("pioB", &pioB_clk),
CLKDEV_CON_ID("pioC", &pioC_clk),
CLKDEV_CON_ID("pioD", &pioD_clk),
+ /* usart lookup table for DT entries */
+ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
+ CLKDEV_CON_DEV_ID("usart", "fffc0000.serial", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffc4000.serial", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffc8000.serial", &usart2_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffcc000.serial", &usart3_clk),
+ /* tc lookup table for DT entries */
+ CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
+ CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk),
+ CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "fffa4000.timer", &tc3_clk),
+ CLKDEV_CON_DEV_ID("t1_clk", "fffa4000.timer", &tc4_clk),
+ CLKDEV_CON_DEV_ID("t2_clk", "fffa4000.timer", &tc5_clk),
+ CLKDEV_CON_DEV_ID("hclk", "300000.ohci", &ohci_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
@@ -361,10 +379,10 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
0 /* Advanced Interrupt Controller (IRQ6) */
};
-struct at91_init_soc __initdata at91rm9200_soc = {
+AT91_SOC_START(rm9200)
.map_io = at91rm9200_map_io,
.default_irq_priority = at91rm9200_default_irq_priority,
.ioremap_registers = at91rm9200_ioremap_registers,
.register_clocks = at91rm9200_register_clocks,
.init = at91rm9200_initialize,
-};
+AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index aaa443b..cafe988 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -24,6 +24,9 @@
#include <linux/irq.h>
#include <linux/clockchips.h>
#include <linux/export.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <asm/mach/time.h>
@@ -91,7 +94,8 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
static struct irqaction at91rm9200_timer_irq = {
.name = "at91_tick",
.flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = at91rm9200_timer_interrupt
+ .handler = at91rm9200_timer_interrupt,
+ .irq = NR_IRQS_LEGACY + AT91_ID_SYS,
};
static cycle_t read_clk32k(struct clocksource *cs)
@@ -179,8 +183,60 @@ static struct clock_event_device clkevt = {
void __iomem *at91_st_base;
EXPORT_SYMBOL_GPL(at91_st_base);
+#ifdef CONFIG_OF
+static struct of_device_id at91rm9200_st_timer_ids[] = {
+ { .compatible = "atmel,at91rm9200-st" },
+ { /* sentinel */ }
+};
+
+static int __init of_at91rm9200_st_init(void)
+{
+ struct device_node *np;
+ int ret;
+
+ np = of_find_matching_node(NULL, at91rm9200_st_timer_ids);
+ if (!np)
+ goto err;
+
+ at91_st_base = of_iomap(np, 0);
+ if (!at91_st_base)
+ goto node_err;
+
+ /* Get the interrupts property */
+ ret = irq_of_parse_and_map(np, 0);
+ if (!ret)
+ goto ioremap_err;
+ at91rm9200_timer_irq.irq = ret;
+
+ of_node_put(np);
+
+ return 0;
+
+ioremap_err:
+ iounmap(at91_st_base);
+node_err:
+ of_node_put(np);
+err:
+ return -EINVAL;
+}
+#else
+static int __init of_at91rm9200_st_init(void)
+{
+ return -EINVAL;
+}
+#endif
+
void __init at91rm9200_ioremap_st(u32 addr)
{
+#ifdef CONFIG_OF
+ struct device_node *np;
+
+ np = of_find_matching_node(NULL, at91rm9200_st_timer_ids);
+ if (np) {
+ of_node_put(np);
+ return;
+ }
+#endif
at91_st_base = ioremap(addr, 256);
if (!at91_st_base)
panic("Impossible to ioremap ST\n");
@@ -191,13 +247,16 @@ void __init at91rm9200_ioremap_st(u32 addr)
*/
void __init at91rm9200_timer_init(void)
{
+ /* For device tree enabled device: initialize here */
+ of_at91rm9200_st_init();
+
/* Disable all timer interrupts, and clear any pending ones */
at91_st_write(AT91_ST_IDR,
AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS);
at91_st_read(AT91_ST_SR);
/* Make IRQs happen for the system timer */
- setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq);
+ setup_irq(at91rm9200_timer_irq.irq, &at91rm9200_timer_irq);
/* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
* directly for the clocksource and all clockevents, after adjusting
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index f820261..c9e029e 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -230,11 +230,15 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("t1_clk", "fffdc000.timer", &tc4_clk),
CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk),
CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &ohci_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
CLKDEV_CON_ID("pioA", &pioA_clk),
CLKDEV_CON_ID("pioB", &pioB_clk),
CLKDEV_CON_ID("pioC", &pioC_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
@@ -390,10 +394,10 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
0, /* Advanced Interrupt Controller */
};
-struct at91_init_soc __initdata at91sam9260_soc = {
+AT91_SOC_START(sam9260)
.map_io = at91sam9260_map_io,
.default_irq_priority = at91sam9260_default_irq_priority,
.ioremap_registers = at91sam9260_ioremap_registers,
.register_clocks = at91sam9260_register_clocks,
.init = at91sam9260_initialize,
-};
+AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 04295c0..4d262f3 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -334,10 +334,10 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
0, /* Advanced Interrupt Controller */
};
-struct at91_init_soc __initdata at91sam9261_soc = {
+AT91_SOC_START(sam9261)
.map_io = at91sam9261_map_io,
.default_irq_priority = at91sam9261_default_irq_priority,
.ioremap_registers = at91sam9261_ioremap_registers,
.register_clocks = at91sam9261_register_clocks,
.init = at91sam9261_initialize,
-};
+AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index d6f9c23..ed390f6 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -211,7 +211,14 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("hclk", "a00000.ohci", &ohci_clk),
CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "fff80000.mmc", &mmc0_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "fff84000.mmc", &mmc1_clk),
CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioCDE_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCDE_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCDE_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
@@ -365,10 +372,10 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
0, /* Advanced Interrupt Controller (IRQ1) */
};
-struct at91_init_soc __initdata at91sam9263_soc = {
+AT91_SOC_START(sam9263)
.map_io = at91sam9263_map_io,
.default_irq_priority = at91sam9263_default_irq_priority,
.ioremap_registers = at91sam9263_ioremap_registers,
.register_clocks = at91sam9263_register_clocks,
.init = at91sam9263_initialize,
-};
+AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 84af1b5..c5c2acc 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -256,10 +256,18 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk),
CLKDEV_CON_DEV_ID("hclk", "700000.ohci", &uhphs_clk),
CLKDEV_CON_DEV_ID("ehci_clk", "800000.ehci", &uhphs_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "fff80000.mmc", &mmc0_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "fffd0000.mmc", &mmc1_clk),
CLKDEV_CON_DEV_ID(NULL, "fff84000.i2c", &twi0_clk),
CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi1_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioC_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioDE_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioDE_clk),
+
CLKDEV_CON_ID("pioA", &pioA_clk),
CLKDEV_CON_ID("pioB", &pioB_clk),
CLKDEV_CON_ID("pioC", &pioC_clk),
@@ -409,10 +417,10 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
0, /* Advanced Interrupt Controller (IRQ0) */
};
-struct at91_init_soc __initdata at91sam9g45_soc = {
+AT91_SOC_START(sam9g45)
.map_io = at91sam9g45_map_io,
.default_irq_priority = at91sam9g45_default_irq_priority,
.ioremap_registers = at91sam9g45_ioremap_registers,
.register_clocks = at91sam9g45_register_clocks,
.init = at91sam9g45_initialize,
-};
+AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c
index 732d3d3..70b3a992 100644
--- a/arch/arm/mach-at91/at91sam9n12.c
+++ b/arch/arm/mach-at91/at91sam9n12.c
@@ -168,13 +168,14 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk),
CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb_clk),
CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc_clk),
CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk),
CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk),
CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk),
- CLKDEV_CON_ID("pioA", &pioAB_clk),
- CLKDEV_CON_ID("pioB", &pioAB_clk),
- CLKDEV_CON_ID("pioC", &pioCD_clk),
- CLKDEV_CON_ID("pioD", &pioCD_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioAB_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioAB_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCD_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCD_clk),
/* additional fake clock for macb_hclk */
CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &uhp_clk),
CLKDEV_CON_DEV_ID("ohci_clk", "500000.ohci", &uhp_clk),
@@ -223,13 +224,10 @@ static void __init at91sam9n12_map_io(void)
void __init at91sam9n12_initialize(void)
{
at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0);
-
- /* Register GPIO subsystem (using DT) */
- at91_gpio_init(NULL, 0);
}
-struct at91_init_soc __initdata at91sam9n12_soc = {
+AT91_SOC_START(sam9n12)
.map_io = at91sam9n12_map_io,
.register_clocks = at91sam9n12_register_clocks,
.init = at91sam9n12_initialize,
-};
+AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 72e9084..cbe72e4 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -338,10 +338,10 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = {
0, /* Advanced Interrupt Controller */
};
-struct at91_init_soc __initdata at91sam9rl_soc = {
+AT91_SOC_START(sam9rl)
.map_io = at91sam9rl_map_io,
.default_irq_priority = at91sam9rl_default_irq_priority,
.ioremap_registers = at91sam9rl_ioremap_registers,
.register_clocks = at91sam9rl_register_clocks,
.init = at91sam9rl_initialize,
-};
+AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
index e503538..3c729f0 100644
--- a/arch/arm/mach-at91/at91sam9x5.c
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -229,15 +229,17 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk),
CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk),
CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc0_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "f000c000.mmc", &mmc1_clk),
CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk),
CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk),
CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk),
CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk),
CLKDEV_CON_DEV_ID(NULL, "f8018000.i2c", &twi2_clk),
- CLKDEV_CON_ID("pioA", &pioAB_clk),
- CLKDEV_CON_ID("pioB", &pioAB_clk),
- CLKDEV_CON_ID("pioC", &pioCD_clk),
- CLKDEV_CON_ID("pioD", &pioCD_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioAB_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioAB_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCD_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCD_clk),
/* additional fake clock for macb_hclk */
CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb0_clk),
CLKDEV_CON_DEV_ID("hclk", "f8030000.ethernet", &macb1_clk),
@@ -313,18 +315,11 @@ static void __init at91sam9x5_map_io(void)
at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE);
}
-void __init at91sam9x5_initialize(void)
-{
- /* Register GPIO subsystem (using DT) */
- at91_gpio_init(NULL, 0);
-}
-
/* --------------------------------------------------------------------
* Interrupt initialization
* -------------------------------------------------------------------- */
-struct at91_init_soc __initdata at91sam9x5_soc = {
+AT91_SOC_START(sam9x5)
.map_io = at91sam9x5_map_io,
.register_clocks = at91sam9x5_register_clocks,
- .init = at91sam9x5_initialize,
-};
+AT91_SOC_END
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
index e8f45c4..3b6a948 100644
--- a/arch/arm/mach-at91/board-dt.c
+++ b/arch/arm/mach-at91/board-dt.c
@@ -30,8 +30,6 @@
static const struct of_device_id irq_of_match[] __initconst = {
{ .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init },
- { .compatible = "atmel,at91rm9200-gpio", .data = at91_gpio_of_irq_setup },
- { .compatible = "atmel,at91sam9x5-gpio", .data = at91_gpio_of_irq_setup },
{ /*sentinel*/ }
};
diff --git a/arch/arm/mach-at91/board-rm9200-dt.c b/arch/arm/mach-at91/board-rm9200-dt.c
new file mode 100644
index 0000000..5f9ce3d
--- /dev/null
+++ b/arch/arm/mach-at91/board-rm9200-dt.c
@@ -0,0 +1,57 @@
+/*
+ * Setup code for AT91RM9200 Evaluation Kits with Device Tree support
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ * 2012 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "at91_aic.h"
+#include "generic.h"
+
+
+static const struct of_device_id irq_of_match[] __initconst = {
+ { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init },
+ { /*sentinel*/ }
+};
+
+static void __init at91rm9200_dt_init_irq(void)
+{
+ of_irq_init(irq_of_match);
+}
+
+static void __init at91rm9200_dt_device_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *at91rm9200_dt_board_compat[] __initdata = {
+ "atmel,at91rm9200",
+ NULL
+};
+
+DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)")
+ .timer = &at91rm9200_timer,
+ .map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
+ .init_early = at91rm9200_dt_initialize,
+ .init_irq = at91rm9200_dt_init_irq,
+ .init_machine = at91rm9200_dt_device_init,
+ .dt_compat = at91rm9200_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index b62f560e..fc593d6 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -20,6 +20,7 @@ extern void __init at91_init_sram(int bank, unsigned long base,
extern void __init at91rm9200_set_type(int type);
extern void __init at91_initialize(unsigned long main_clock);
extern void __init at91x40_initialize(unsigned long main_clock);
+extern void __init at91rm9200_dt_initialize(void);
extern void __init at91_dt_initialize(void);
/* Interrupts */
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index be42cf0..c5d7e1e 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -23,8 +23,6 @@
#include <linux/io.h>
#include <linux/irqdomain.h>
#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_gpio.h>
#include <asm/mach/irq.h>
@@ -33,6 +31,8 @@
#include "generic.h"
+#define MAX_NB_GPIO_PER_BANK 32
+
struct at91_gpio_chip {
struct gpio_chip chip;
struct at91_gpio_chip *next; /* Bank sharing same clock */
@@ -46,6 +46,7 @@ struct at91_gpio_chip {
#define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip)
+static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset);
static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip);
static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val);
static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset);
@@ -55,26 +56,27 @@ static int at91_gpiolib_direction_input(struct gpio_chip *chip,
unsigned offset);
static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset);
-#define AT91_GPIO_CHIP(name, nr_gpio) \
+#define AT91_GPIO_CHIP(name) \
{ \
.chip = { \
.label = name, \
+ .request = at91_gpiolib_request, \
.direction_input = at91_gpiolib_direction_input, \
.direction_output = at91_gpiolib_direction_output, \
.get = at91_gpiolib_get, \
.set = at91_gpiolib_set, \
.dbg_show = at91_gpiolib_dbg_show, \
.to_irq = at91_gpiolib_to_irq, \
- .ngpio = nr_gpio, \
+ .ngpio = MAX_NB_GPIO_PER_BANK, \
}, \
}
static struct at91_gpio_chip gpio_chip[] = {
- AT91_GPIO_CHIP("pioA", 32),
- AT91_GPIO_CHIP("pioB", 32),
- AT91_GPIO_CHIP("pioC", 32),
- AT91_GPIO_CHIP("pioD", 32),
- AT91_GPIO_CHIP("pioE", 32),
+ AT91_GPIO_CHIP("pioA"),
+ AT91_GPIO_CHIP("pioB"),
+ AT91_GPIO_CHIP("pioC"),
+ AT91_GPIO_CHIP("pioD"),
+ AT91_GPIO_CHIP("pioE"),
};
static int gpio_banks;
@@ -89,7 +91,7 @@ static unsigned long at91_gpio_caps;
static inline void __iomem *pin_to_controller(unsigned pin)
{
- pin /= 32;
+ pin /= MAX_NB_GPIO_PER_BANK;
if (likely(pin < gpio_banks))
return gpio_chip[pin].regbase;
@@ -98,7 +100,7 @@ static inline void __iomem *pin_to_controller(unsigned pin)
static inline unsigned pin_to_mask(unsigned pin)
{
- return 1 << (pin % 32);
+ return 1 << (pin % MAX_NB_GPIO_PER_BANK);
}
@@ -713,80 +715,6 @@ postcore_initcall(at91_gpio_debugfs_init);
*/
static struct lock_class_key gpio_lock_class;
-#if defined(CONFIG_OF)
-static int at91_gpio_irq_map(struct irq_domain *h, unsigned int virq,
- irq_hw_number_t hw)
-{
- struct at91_gpio_chip *at91_gpio = h->host_data;
-
- irq_set_lockdep_class(virq, &gpio_lock_class);
-
- /*
- * Can use the "simple" and not "edge" handler since it's
- * shorter, and the AIC handles interrupts sanely.
- */
- irq_set_chip_and_handler(virq, &gpio_irqchip,
- handle_simple_irq);
- set_irq_flags(virq, IRQF_VALID);
- irq_set_chip_data(virq, at91_gpio);
-
- return 0;
-}
-
-static struct irq_domain_ops at91_gpio_ops = {
- .map = at91_gpio_irq_map,
- .xlate = irq_domain_xlate_twocell,
-};
-
-int __init at91_gpio_of_irq_setup(struct device_node *node,
- struct device_node *parent)
-{
- struct at91_gpio_chip *prev = NULL;
- int alias_idx = of_alias_get_id(node, "gpio");
- struct at91_gpio_chip *at91_gpio = &gpio_chip[alias_idx];
-
- /* Setup proper .irq_set_type function */
- if (has_pio3())
- gpio_irqchip.irq_set_type = alt_gpio_irq_type;
- else
- gpio_irqchip.irq_set_type = gpio_irq_type;
-
- /* Disable irqs of this PIO controller */
- __raw_writel(~0, at91_gpio->regbase + PIO_IDR);
-
- /* Setup irq domain */
- at91_gpio->domain = irq_domain_add_linear(node, at91_gpio->chip.ngpio,
- &at91_gpio_ops, at91_gpio);
- if (!at91_gpio->domain)
- panic("at91_gpio.%d: couldn't allocate irq domain (DT).\n",
- at91_gpio->pioc_idx);
-
- /* Setup chained handler */
- if (at91_gpio->pioc_idx)
- prev = &gpio_chip[at91_gpio->pioc_idx - 1];
-
- /* The toplevel handler handles one bank of GPIOs, except
- * on some SoC it can handles up to three...
- * We only set up the handler for the first of the list.
- */
- if (prev && prev->next == at91_gpio)
- return 0;
-
- at91_gpio->pioc_virq = irq_create_mapping(irq_find_host(parent),
- at91_gpio->pioc_hwirq);
- irq_set_chip_data(at91_gpio->pioc_virq, at91_gpio);
- irq_set_chained_handler(at91_gpio->pioc_virq, gpio_irq_handler);
-
- return 0;
-}
-#else
-int __init at91_gpio_of_irq_setup(struct device_node *node,
- struct device_node *parent)
-{
- return -EINVAL;
-}
-#endif
-
/*
* irqdomain initialization: pile up irqdomains on top of AIC range
*/
@@ -862,6 +790,16 @@ void __init at91_gpio_irq_setup(void)
}
/* gpiolib support */
+static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset)
+{
+ struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+ void __iomem *pio = at91_gpio->regbase;
+ unsigned mask = 1 << offset;
+
+ __raw_writel(mask, pio + PIO_PER);
+ return 0;
+}
+
static int at91_gpiolib_direction_input(struct gpio_chip *chip,
unsigned offset)
{
@@ -975,81 +913,11 @@ err:
return -EINVAL;
}
-#ifdef CONFIG_OF_GPIO
-static void __init of_at91_gpio_init_one(struct device_node *np)
-{
- int alias_idx;
- struct at91_gpio_chip *at91_gpio;
-
- if (!np)
- return;
-
- alias_idx = of_alias_get_id(np, "gpio");
- if (alias_idx >= MAX_GPIO_BANKS) {
- pr_err("at91_gpio, failed alias idx(%d) > MAX_GPIO_BANKS(%d), ignoring.\n",
- alias_idx, MAX_GPIO_BANKS);
- return;
- }
-
- at91_gpio = &gpio_chip[alias_idx];
- at91_gpio->chip.base = alias_idx * at91_gpio->chip.ngpio;
-
- at91_gpio->regbase = of_iomap(np, 0);
- if (!at91_gpio->regbase) {
- pr_err("at91_gpio.%d, failed to map registers, ignoring.\n",
- alias_idx);
- return;
- }
-
- /* Get the interrupts property */
- if (of_property_read_u32(np, "interrupts", &at91_gpio->pioc_hwirq)) {
- pr_err("at91_gpio.%d, failed to get interrupts property, ignoring.\n",
- alias_idx);
- goto ioremap_err;
- }
-
- /* Get capabilities from compatibility property */
- if (of_device_is_compatible(np, "atmel,at91sam9x5-gpio"))
- at91_gpio_caps |= AT91_GPIO_CAP_PIO3;
-
- /* Setup clock */
- if (at91_gpio_setup_clk(alias_idx))
- goto ioremap_err;
-
- at91_gpio->chip.of_node = np;
- gpio_banks = max(gpio_banks, alias_idx + 1);
- at91_gpio->pioc_idx = alias_idx;
- return;
-
-ioremap_err:
- iounmap(at91_gpio->regbase);
-}
-
-static int __init of_at91_gpio_init(void)
-{
- struct device_node *np = NULL;
-
- /*
- * This isn't ideal, but it gets things hooked up until this
- * driver is converted into a platform_device
- */
- for_each_compatible_node(np, NULL, "atmel,at91rm9200-gpio")
- of_at91_gpio_init_one(np);
-
- return gpio_banks > 0 ? 0 : -EINVAL;
-}
-#else
-static int __init of_at91_gpio_init(void)
-{
- return -EINVAL;
-}
-#endif
-
static void __init at91_gpio_init_one(int idx, u32 regbase, int pioc_hwirq)
{
struct at91_gpio_chip *at91_gpio = &gpio_chip[idx];
- at91_gpio->chip.base = idx * at91_gpio->chip.ngpio;
+ at91_gpio->chip.base = idx * MAX_NB_GPIO_PER_BANK;
at91_gpio->pioc_hwirq = pioc_hwirq;
at91_gpio->pioc_idx = idx;
@@ -1079,11 +947,11 @@ void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
BUG_ON(nr_banks > MAX_GPIO_BANKS);
- if (of_at91_gpio_init() < 0) {
- /* No GPIO controller found in device tree */
- for (i = 0; i < nr_banks; i++)
- at91_gpio_init_one(i, data[i].regbase, data[i].id);
- }
+ if (of_have_populated_dt())
+ return;
+
+ for (i = 0; i < nr_banks; i++)
+ at91_gpio_init_one(i, data[i].regbase, data[i].id);
for (i = 0; i < gpio_banks; i++) {
at91_gpio = &gpio_chip[i];
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index c55a436..a0d92a9 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -70,16 +70,6 @@ struct at91_cf_data {
extern void __init at91_add_device_cf(struct at91_cf_data *data);
/* MMC / SD */
- /* at91_mci platform config */
-struct at91_mmc_data {
- int det_pin; /* card detect IRQ */
- unsigned slot_b:1; /* uses Slot B */
- unsigned wire4:1; /* (SD) supports DAT0..DAT3 */
- int wp_pin; /* (SD) writeprotect detect */
- int vcc_pin; /* power switching (high == on) */
-};
-extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
-
/* atmel-mci platform config */
extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data);
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 0b32c81..19cdd0b 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -10,6 +10,7 @@
#include <linux/mm.h>
#include <linux/pm.h>
#include <linux/of_address.h>
+#include <linux/pinctrl/machine.h>
#include <asm/system_misc.h>
#include <asm/mach/map.h>
@@ -338,6 +339,7 @@ static void at91_dt_rstc(void)
}
static struct of_device_id ramc_ids[] = {
+ { .compatible = "atmel,at91rm9200-sdramc" },
{ .compatible = "atmel,at91sam9260-sdramc" },
{ .compatible = "atmel,at91sam9g45-ddramc" },
{ /*sentinel*/ }
@@ -436,6 +438,19 @@ end:
of_node_put(np);
}
+void __init at91rm9200_dt_initialize(void)
+{
+ at91_dt_ramc();
+
+ /* Init clock subsystem */
+ at91_dt_clock_init();
+
+ /* Register the processor-specific clocks */
+ at91_boot_soc.register_clocks();
+
+ at91_boot_soc.init();
+}
+
void __init at91_dt_initialize(void)
{
at91_dt_rstc();
@@ -448,7 +463,8 @@ void __init at91_dt_initialize(void)
/* Register the processor-specific clocks */
at91_boot_soc.register_clocks();
- at91_boot_soc.init();
+ if (at91_boot_soc.init)
+ at91_boot_soc.init();
}
#endif
@@ -463,4 +479,6 @@ void __init at91_initialize(unsigned long main_clock)
at91_boot_soc.register_clocks();
at91_boot_soc.init();
+
+ pinctrl_provide_dummies();
}
diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h
index a9cfeb1..9c6d3d4 100644
--- a/arch/arm/mach-at91/soc.h
+++ b/arch/arm/mach-at91/soc.h
@@ -5,6 +5,7 @@
*/
struct at91_init_soc {
+ int builtin;
unsigned int *default_irq_priority;
void (*map_io)(void);
void (*ioremap_registers)(void);
@@ -22,9 +23,18 @@ extern struct at91_init_soc at91sam9rl_soc;
extern struct at91_init_soc at91sam9x5_soc;
extern struct at91_init_soc at91sam9n12_soc;
+#define AT91_SOC_START(_name) \
+struct at91_init_soc __initdata at91##_name##_soc \
+ __used \
+ = { \
+ .builtin = 1, \
+
+#define AT91_SOC_END \
+};
+
static inline int at91_soc_is_enabled(void)
{
- return at91_boot_soc.init != NULL;
+ return at91_boot_soc.builtin;
}
#if !defined(CONFIG_SOC_AT91RM9200)
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index cd0c8b1..14e9947 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -713,8 +713,7 @@ static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type,
break;
case VPBE_ENC_CUSTOM_TIMINGS:
if (pclock <= 27000000) {
- v |= DM644X_VPSS_MUXSEL_PLL2_MODE |
- DM644X_VPSS_DACCLKEN;
+ v |= DM644X_VPSS_DACCLKEN;
writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
} else {
/*
diff --git a/arch/arm/mach-dove/include/mach/pm.h b/arch/arm/mach-dove/include/mach/pm.h
index 7bcd0df..b47f750 100644
--- a/arch/arm/mach-dove/include/mach/pm.h
+++ b/arch/arm/mach-dove/include/mach/pm.h
@@ -63,7 +63,7 @@ static inline int pmu_to_irq(int pin)
static inline int irq_to_pmu(int irq)
{
- if (IRQ_DOVE_PMU_START < irq && irq < NR_IRQS)
+ if (IRQ_DOVE_PMU_START <= irq && irq < NR_IRQS)
return irq - IRQ_DOVE_PMU_START;
return -EINVAL;
diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
index 0877115..bc4344a 100644
--- a/arch/arm/mach-dove/irq.c
+++ b/arch/arm/mach-dove/irq.c
@@ -46,8 +46,20 @@ static void pmu_irq_ack(struct irq_data *d)
int pin = irq_to_pmu(d->irq);
u32 u;
+ /*
+ * The PMU mask register is not RW0C: it is RW. This means that
+ * the bits take whatever value is written to them; if you write
+ * a '1', you will set the interrupt.
+ *
+ * Unfortunately this means there is NO race free way to clear
+ * these interrupts.
+ *
+ * So, let's structure the code so that the window is as small as
+ * possible.
+ */
u = ~(1 << (pin & 31));
- writel(u, PMU_INTERRUPT_CAUSE);
+ u &= readl_relaxed(PMU_INTERRUPT_CAUSE);
+ writel_relaxed(u, PMU_INTERRUPT_CAUSE);
}
static struct irq_chip pmu_irq_chip = {
diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
index 21d568b..87e07d6 100644
--- a/arch/arm/mach-exynos/dma.c
+++ b/arch/arm/mach-exynos/dma.c
@@ -275,6 +275,9 @@ static int __init exynos_dma_init(void)
exynos_pdma1_pdata.nr_valid_peri =
ARRAY_SIZE(exynos4210_pdma1_peri);
exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
+
+ if (samsung_rev() == EXYNOS4210_REV_0)
+ exynos_mdma1_device.res.start = EXYNOS4_PA_S_MDMA1;
} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
exynos_pdma0_pdata.nr_valid_peri =
ARRAY_SIZE(exynos4212_pdma0_peri);
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 8480849..ed4da45 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -90,6 +90,7 @@
#define EXYNOS4_PA_MDMA0 0x10810000
#define EXYNOS4_PA_MDMA1 0x12850000
+#define EXYNOS4_PA_S_MDMA1 0x12840000
#define EXYNOS4_PA_PDMA0 0x12680000
#define EXYNOS4_PA_PDMA1 0x12690000
#define EXYNOS5_PA_MDMA0 0x10800000
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index e428f3a..b3d86d7 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -21,10 +21,9 @@
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/io.h>
+#include <linux/platform_data/clk-integrator.h>
#include <linux/slab.h>
-#include <linux/clkdev.h>
-#include <asm/hardware/icst.h>
#include <mach/lm.h>
#include <mach/impd1.h>
#include <asm/sizes.h>
@@ -36,45 +35,6 @@ MODULE_PARM_DESC(lmid, "logic module stack position");
struct impd1_module {
void __iomem *base;
- struct clk vcos[2];
- struct clk_lookup *clks[3];
-};
-
-static const struct icst_params impd1_vco_params = {
- .ref = 24000000, /* 24 MHz */
- .vco_max = ICST525_VCO_MAX_3V,
- .vco_min = ICST525_VCO_MIN,
- .vd_min = 12,
- .vd_max = 519,
- .rd_min = 3,
- .rd_max = 120,
- .s2div = icst525_s2div,
- .idx2s = icst525_idx2s,
-};
-
-static void impd1_setvco(struct clk *clk, struct icst_vco vco)
-{
- struct impd1_module *impd1 = clk->data;
- u32 val = vco.v | (vco.r << 9) | (vco.s << 16);
-
- writel(0xa05f, impd1->base + IMPD1_LOCK);
- writel(val, clk->vcoreg);
- writel(0, impd1->base + IMPD1_LOCK);
-
-#ifdef DEBUG
- vco.v = val & 0x1ff;
- vco.r = (val >> 9) & 0x7f;
- vco.s = (val >> 16) & 7;
-
- pr_debug("IM-PD1: VCO%d clock is %ld Hz\n",
- vconr, icst525_hz(&impd1_vco_params, vco));
-#endif
-}
-
-static const struct clk_ops impd1_clk_ops = {
- .round = icst_clk_round,
- .set = icst_clk_set,
- .setvco = impd1_setvco,
};
void impd1_tweak_control(struct device *dev, u32 mask, u32 val)
@@ -344,10 +304,6 @@ static struct impd1_device impd1_devs[] = {
}
};
-static struct clk fixed_14745600 = {
- .rate = 14745600,
-};
-
static int impd1_probe(struct lm_device *dev)
{
struct impd1_module *impd1;
@@ -376,23 +332,7 @@ static int impd1_probe(struct lm_device *dev)
printk("IM-PD1 found at 0x%08lx\n",
(unsigned long)dev->resource.start);
- for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
- impd1->vcos[i].ops = &impd1_clk_ops,
- impd1->vcos[i].owner = THIS_MODULE,
- impd1->vcos[i].params = &impd1_vco_params,
- impd1->vcos[i].data = impd1;
- }
- impd1->vcos[0].vcoreg = impd1->base + IMPD1_OSC1;
- impd1->vcos[1].vcoreg = impd1->base + IMPD1_OSC2;
-
- impd1->clks[0] = clkdev_alloc(&impd1->vcos[0], NULL, "lm%x:01000",
- dev->id);
- impd1->clks[1] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00100",
- dev->id);
- impd1->clks[2] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00200",
- dev->id);
- for (i = 0; i < ARRAY_SIZE(impd1->clks); i++)
- clkdev_add(impd1->clks[i]);
+ integrator_impd1_clk_init(impd1->base, dev->id);
for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) {
struct impd1_device *idev = impd1_devs + i;
@@ -431,12 +371,9 @@ static int impd1_remove_one(struct device *dev, void *data)
static void impd1_remove(struct lm_device *dev)
{
struct impd1_module *impd1 = lm_get_drvdata(dev);
- int i;
device_for_each_child(&dev->dev, NULL, impd1_remove_one);
-
- for (i = 0; i < ARRAY_SIZE(impd1->clks); i++)
- clkdev_drop(impd1->clks[i]);
+ integrator_impd1_clk_exit(dev->id);
lm_set_drvdata(dev, NULL);
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 1694f01..6d6bde3 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -410,6 +410,7 @@ void __init ixp4xx_pci_preinit(void)
* Enable the IO window to be way up high, at 0xfffffc00
*/
local_write_config(PCI_BASE_ADDRESS_5, 4, 0xfffffc01);
+ local_write_config(0x40, 4, 0x000080FF); /* No TRDY time limit */
} else {
printk("PCI: IXP4xx is target - No bus scan performed\n");
}
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index fdf91a1..8c0c0e2 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -67,15 +67,12 @@ static struct map_desc ixp4xx_io_desc[] __initdata = {
.pfn = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS),
.length = IXP4XX_PCI_CFG_REGION_SIZE,
.type = MT_DEVICE
- },
-#ifdef CONFIG_DEBUG_LL
- { /* Debug UART mapping */
- .virtual = (unsigned long)IXP4XX_DEBUG_UART_BASE_VIRT,
- .pfn = __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS),
- .length = IXP4XX_DEBUG_UART_REGION_SIZE,
+ }, { /* Queue Manager */
+ .virtual = (unsigned long)IXP4XX_QMGR_BASE_VIRT,
+ .pfn = __phys_to_pfn(IXP4XX_QMGR_BASE_PHYS),
+ .length = IXP4XX_QMGR_REGION_SIZE,
.type = MT_DEVICE
- }
-#endif
+ },
};
void __init ixp4xx_map_io(void)
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index b800a03..53b8348 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -15,6 +15,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/pci.h>
+#include <asm/system_info.h>
#define SLOT_ETHA 0x0B /* IDSEL = AD21 */
#define SLOT_ETHB 0x0C /* IDSEL = AD20 */
@@ -329,7 +330,7 @@ static struct platform_device device_hss_tab[] = {
};
-static struct platform_device *device_tab[6] __initdata = {
+static struct platform_device *device_tab[7] __initdata = {
&device_flash, /* index 0 */
};
diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
index 8c9f8d5..ff686cb 100644
--- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
@@ -17,8 +17,8 @@
#else
mov \rp, #0
#endif
- orr \rv, \rp, #0xff000000 @ virtual
- orr \rv, \rv, #0x00b00000
+ orr \rv, \rp, #0xfe000000 @ virtual
+ orr \rv, \rv, #0x00f00000
orr \rp, \rp, #0xc8000000 @ physical
.endm
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
index eb68b61..c5bae9c 100644
--- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
+++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
@@ -30,51 +30,43 @@
*
* 0x50000000 0x10000000 ioremap'd EXP BUS
*
- * 0x6000000 0x00004000 ioremap'd QMgr
+ * 0xC8000000 0x00013000 0xFEF00000 On-Chip Peripherals
*
- * 0xC0000000 0x00001000 0xffbff000 PCI CFG
+ * 0xC0000000 0x00001000 0xFEF13000 PCI CFG
*
- * 0xC4000000 0x00001000 0xffbfe000 EXP CFG
+ * 0xC4000000 0x00001000 0xFEF14000 EXP CFG
*
- * 0xC8000000 0x00013000 0xffbeb000 On-Chip Peripherals
+ * 0x60000000 0x00004000 0xFEF15000 QMgr
*/
/*
* Queue Manager
*/
-#define IXP4XX_QMGR_BASE_PHYS (0x60000000)
-#define IXP4XX_QMGR_REGION_SIZE (0x00004000)
+#define IXP4XX_QMGR_BASE_PHYS 0x60000000
+#define IXP4XX_QMGR_BASE_VIRT IOMEM(0xFEF15000)
+#define IXP4XX_QMGR_REGION_SIZE 0x00004000
/*
- * Expansion BUS Configuration registers
+ * Peripheral space, including debug UART. Must be section-aligned so that
+ * it can be used with the low-level debug code.
*/
-#define IXP4XX_EXP_CFG_BASE_PHYS (0xC4000000)
-#define IXP4XX_EXP_CFG_BASE_VIRT IOMEM(0xFFBFE000)
-#define IXP4XX_EXP_CFG_REGION_SIZE (0x00001000)
+#define IXP4XX_PERIPHERAL_BASE_PHYS 0xC8000000
+#define IXP4XX_PERIPHERAL_BASE_VIRT IOMEM(0xFEF00000)
+#define IXP4XX_PERIPHERAL_REGION_SIZE 0x00013000
/*
* PCI Config registers
*/
-#define IXP4XX_PCI_CFG_BASE_PHYS (0xC0000000)
-#define IXP4XX_PCI_CFG_BASE_VIRT IOMEM(0xFFBFF000)
-#define IXP4XX_PCI_CFG_REGION_SIZE (0x00001000)
-
-/*
- * Peripheral space
- */
-#define IXP4XX_PERIPHERAL_BASE_PHYS (0xC8000000)
-#define IXP4XX_PERIPHERAL_BASE_VIRT IOMEM(0xFFBEB000)
-#define IXP4XX_PERIPHERAL_REGION_SIZE (0x00013000)
+#define IXP4XX_PCI_CFG_BASE_PHYS 0xC0000000
+#define IXP4XX_PCI_CFG_BASE_VIRT IOMEM(0xFEF13000)
+#define IXP4XX_PCI_CFG_REGION_SIZE 0x00001000
/*
- * Debug UART
- *
- * This is basically a remap of UART1 into a region that is section
- * aligned so that it * can be used with the low-level debug code.
+ * Expansion BUS Configuration registers
*/
-#define IXP4XX_DEBUG_UART_BASE_PHYS (0xC8000000)
-#define IXP4XX_DEBUG_UART_BASE_VIRT IOMEM(0xffb00000)
-#define IXP4XX_DEBUG_UART_REGION_SIZE (0x00001000)
+#define IXP4XX_EXP_CFG_BASE_PHYS 0xC4000000
+#define IXP4XX_EXP_CFG_BASE_VIRT 0xFEF14000
+#define IXP4XX_EXP_CFG_REGION_SIZE 0x00001000
#define IXP4XX_EXP_CS0_OFFSET 0x00
#define IXP4XX_EXP_CS1_OFFSET 0x04
diff --git a/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
index 9e7cad2..4de8da5 100644
--- a/arch/arm/mach-ixp4xx/include/mach/qmgr.h
+++ b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
@@ -86,7 +86,7 @@ void qmgr_release_queue(unsigned int queue);
static inline void qmgr_put_entry(unsigned int queue, u32 val)
{
- extern struct qmgr_regs __iomem *qmgr_regs;
+ struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
#if DEBUG_QMGR
BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */
@@ -99,7 +99,7 @@ static inline void qmgr_put_entry(unsigned int queue, u32 val)
static inline u32 qmgr_get_entry(unsigned int queue)
{
u32 val;
- extern struct qmgr_regs __iomem *qmgr_regs;
+ const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
val = __raw_readl(&qmgr_regs->acc[queue][0]);
#if DEBUG_QMGR
BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */
@@ -112,14 +112,14 @@ static inline u32 qmgr_get_entry(unsigned int queue)
static inline int __qmgr_get_stat1(unsigned int queue)
{
- extern struct qmgr_regs __iomem *qmgr_regs;
+ const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
return (__raw_readl(&qmgr_regs->stat1[queue >> 3])
>> ((queue & 7) << 2)) & 0xF;
}
static inline int __qmgr_get_stat2(unsigned int queue)
{
- extern struct qmgr_regs __iomem *qmgr_regs;
+ const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
BUG_ON(queue >= HALF_QUEUES);
return (__raw_readl(&qmgr_regs->stat2[queue >> 4])
>> ((queue & 0xF) << 1)) & 0x3;
@@ -145,7 +145,7 @@ static inline int qmgr_stat_empty(unsigned int queue)
*/
static inline int qmgr_stat_below_low_watermark(unsigned int queue)
{
- extern struct qmgr_regs __iomem *qmgr_regs;
+ const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
if (queue >= HALF_QUEUES)
return (__raw_readl(&qmgr_regs->statne_h) >>
(queue - HALF_QUEUES)) & 0x01;
@@ -172,7 +172,7 @@ static inline int qmgr_stat_above_high_watermark(unsigned int queue)
*/
static inline int qmgr_stat_full(unsigned int queue)
{
- extern struct qmgr_regs __iomem *qmgr_regs;
+ const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
if (queue >= HALF_QUEUES)
return (__raw_readl(&qmgr_regs->statf_h) >>
(queue - HALF_QUEUES)) & 0x01;
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
index a17ed79..d4eb09a 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
@@ -116,7 +116,11 @@
/* NPE mailbox_status value for reset */
#define RESET_MBOX_STAT 0x0000F0F0
-const char *npe_names[] = { "NPE-A", "NPE-B", "NPE-C" };
+#define NPE_A_FIRMWARE "NPE-A"
+#define NPE_B_FIRMWARE "NPE-B"
+#define NPE_C_FIRMWARE "NPE-C"
+
+const char *npe_names[] = { NPE_A_FIRMWARE, NPE_B_FIRMWARE, NPE_C_FIRMWARE };
#define print_npe(pri, npe, fmt, ...) \
printk(pri "%s: " fmt, npe_name(npe), ## __VA_ARGS__)
@@ -724,6 +728,9 @@ module_exit(npe_cleanup_module);
MODULE_AUTHOR("Krzysztof Halasa");
MODULE_LICENSE("GPL v2");
+MODULE_FIRMWARE(NPE_A_FIRMWARE);
+MODULE_FIRMWARE(NPE_B_FIRMWARE);
+MODULE_FIRMWARE(NPE_C_FIRMWARE);
EXPORT_SYMBOL(npe_names);
EXPORT_SYMBOL(npe_running);
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
index 852f7c9..9d1b6b7 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
@@ -14,7 +14,7 @@
#include <linux/module.h>
#include <mach/qmgr.h>
-struct qmgr_regs __iomem *qmgr_regs;
+static struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
static struct resource *mem_res;
static spinlock_t qmgr_lock;
static u32 used_sram_bitmap[4]; /* 128 16-dword pages */
@@ -293,12 +293,6 @@ static int qmgr_init(void)
if (mem_res == NULL)
return -EBUSY;
- qmgr_regs = ioremap(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
- if (qmgr_regs == NULL) {
- err = -ENOMEM;
- goto error_map;
- }
-
/* reset qmgr registers */
for (i = 0; i < 4; i++) {
__raw_writel(0x33333333, &qmgr_regs->stat1[i]);
@@ -347,8 +341,6 @@ static int qmgr_init(void)
error_irq2:
free_irq(IRQ_IXP4XX_QM1, NULL);
error_irq:
- iounmap(qmgr_regs);
-error_map:
release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
return err;
}
@@ -359,7 +351,6 @@ static void qmgr_remove(void)
free_irq(IRQ_IXP4XX_QM2, NULL);
synchronize_irq(IRQ_IXP4XX_QM1);
synchronize_irq(IRQ_IXP4XX_QM2);
- iounmap(qmgr_regs);
release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
}
@@ -369,7 +360,6 @@ module_exit(qmgr_remove);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Krzysztof Halasa");
-EXPORT_SYMBOL(qmgr_regs);
EXPORT_SYMBOL(qmgr_set_irq);
EXPORT_SYMBOL(qmgr_enable_irq);
EXPORT_SYMBOL(qmgr_disable_irq);
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index ec54491..74fc5a0 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -207,14 +207,19 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
return 1;
}
+/*
+ * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
+ * is operating as a root complex this needs to be switched to
+ * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
+ * the device. Decoding setup is handled by the orion code.
+ */
static void __devinit rc_pci_fixup(struct pci_dev *dev)
{
- /*
- * Prevent enumeration of root complex.
- */
if (dev->bus->parent == NULL && dev->devfn == 0) {
int i;
+ dev->class &= 0xff;
+ dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
dev->resource[i].start = 0;
dev->resource[i].end = 0;
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index bfa1eab..22ef8a1 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -24,6 +24,7 @@
#include <linux/i2c.h>
#include <linux/io.h>
#include <linux/pinctrl/machine.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
#include <asm/hardware/vic.h>
#include <asm/sizes.h>
#include <asm/mach-types.h>
@@ -32,9 +33,7 @@
#include <asm/mach/flash.h>
#include <asm/mach/time.h>
-#include <plat/gpio-nomadik.h>
#include <plat/mtu.h>
-#include <plat/pincfg.h>
#include <linux/platform_data/mtd-nomadik-nand.h>
#include <mach/fsmc.h>
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index b617eae..1273931 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -26,8 +26,8 @@
#include <linux/irq.h>
#include <linux/dma-mapping.h>
#include <linux/platform_data/clk-nomadik.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
-#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c
index 6d14454..0c2f662 100644
--- a/arch/arm/mach-nomadik/i2c-8815nhk.c
+++ b/arch/arm/mach-nomadik/i2c-8815nhk.c
@@ -4,8 +4,7 @@
#include <linux/i2c-algo-bit.h>
#include <linux/i2c-gpio.h>
#include <linux/platform_device.h>
-#include <plat/gpio-nomadik.h>
-#include <plat/pincfg.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
/*
* There are two busses in the 8815NHK.
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 48d5e41..3785906 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -580,6 +580,11 @@ static void __init igep_wlan_bt_init(void)
} else
return;
+ /* Make sure that the GPIO pins are muxed correctly */
+ omap_mux_init_gpio(igep_wlan_bt_gpios[0].gpio, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(igep_wlan_bt_gpios[1].gpio, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(igep_wlan_bt_gpios[2].gpio, OMAP_PIN_OUTPUT);
+
err = gpio_request_array(igep_wlan_bt_gpios,
ARRAY_SIZE(igep_wlan_bt_gpios));
if (err) {
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index b700685..56277a0 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -45,7 +45,6 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include "common.h"
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index 48daac2..84551f2 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -64,30 +64,36 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
struct spi_board_info *spi_bi = &ads7846_spi_board_info;
int err;
- err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
- if (err) {
- pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
- return;
- }
+ /*
+ * If a board defines get_pendown_state() function, request the pendown
+ * GPIO and set the GPIO debounce time.
+ * If a board does not define the get_pendown_state() function, then
+ * the ads7846 driver will setup the pendown GPIO itself.
+ */
+ if (board_pdata && board_pdata->get_pendown_state) {
+ err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
+ if (err) {
+ pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
+ return;
+ }
- if (gpio_debounce)
- gpio_set_debounce(gpio_pendown, gpio_debounce);
+ if (gpio_debounce)
+ gpio_set_debounce(gpio_pendown, gpio_debounce);
+
+ gpio_export(gpio_pendown, 0);
+ }
spi_bi->bus_num = bus_num;
spi_bi->irq = gpio_to_irq(gpio_pendown);
+ ads7846_config.gpio_pendown = gpio_pendown;
+
if (board_pdata) {
board_pdata->gpio_pendown = gpio_pendown;
+ board_pdata->gpio_pendown_debounce = gpio_debounce;
spi_bi->platform_data = board_pdata;
- if (board_pdata->get_pendown_state)
- gpio_export(gpio_pendown, 0);
- } else {
- ads7846_config.gpio_pendown = gpio_pendown;
}
- if (!board_pdata || (board_pdata && !board_pdata->get_pendown_state))
- gpio_free(gpio_pendown);
-
spi_register_board_info(&ads7846_spi_board_info, 1);
}
#else
diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c
index 72e0f01b..49a7ffb 100644
--- a/arch/arm/mach-omap2/drm.c
+++ b/arch/arm/mach-omap2/drm.c
@@ -23,15 +23,20 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/platform_data/omap_drm.h>
#include <plat/omap_device.h>
#include <plat/omap_hwmod.h>
+#include <plat/cpu.h>
#if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE)
+static struct omap_drm_platform_data platform_data;
+
static struct platform_device omap_drm_device = {
.dev = {
.coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &platform_data,
},
.name = "omapdrm",
.id = 0,
@@ -52,6 +57,8 @@ static int __init omap_init_drm(void)
oh->name);
}
+ platform_data.omaprev = GET_OMAP_REVISION();
+
return platform_device_register(&omap_drm_device);
}
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 44c4205..a256135 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -73,6 +73,7 @@ void __init omap4_pmic_init(const char *pmic_type,
{
/* PMIC part*/
omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
+ omap_mux_init_signal("fref_clk0_out.sys_drm_msecure", OMAP_PIN_OUTPUT);
omap_pmic_init(1, 400, pmic_type, 7 + OMAP44XX_IRQ_GIC_START, pmic_data);
/* Register additional devices on i2c1 bus if needed */
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 0a43f31..7a05de7 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -548,7 +548,6 @@ static struct platform_device fsi_ak4648_device = {
/* I2C */
static struct pcf857x_platform_data pcf8575_pdata = {
.gpio_base = GPIO_PCF8575_BASE,
- .irq = intcs_evt2irq(0x3260), /* IRQ19 */
};
static struct i2c_board_info i2c0_devices[] = {
@@ -570,6 +569,7 @@ static struct i2c_board_info i2c1_devices[] = {
static struct i2c_board_info i2c3_devices[] = {
{
I2C_BOARD_INFO("pcf8575", 0x20),
+ .irq = intcs_evt2irq(0x3260), /* IRQ19 */
.platform_data = &pcf8575_pdata,
},
};
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index b8efac4..ece8a2d 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -1445,8 +1445,6 @@ static struct platform_device pinctrl_device = {
static struct u300_gpio_platform u300_gpio_plat = {
.ports = 7,
.gpio_base = 0,
- .gpio_irq_base = IRQ_U300_GPIO_BASE,
- .pinctrl_device = &pinctrl_device,
};
static struct platform_device gpio_device = {
@@ -1590,6 +1588,7 @@ static struct platform_device *platform_devs[] __initdata = {
&i2c1_device,
&keypad_device,
&rtc_device,
+ &pinctrl_device,
&gpio_device,
&nand_device,
&wdog_device,
@@ -1804,7 +1803,7 @@ MACHINE_START(U300, "Ericsson AB U335 S335/B335 Prototype Board")
/* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
.atag_offset = 0x100,
.map_io = u300_map_io,
- .nr_irqs = NR_IRQS_U300,
+ .nr_irqs = 0,
.init_irq = u300_init_irq,
.handle_irq = vic_handle_irq,
.timer = &u300_timer,
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
index e27425a..21d5e76 100644
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -12,79 +12,69 @@
#ifndef __MACH_IRQS_H
#define __MACH_IRQS_H
-#define IRQ_U300_INTCON0_START 1
-#define IRQ_U300_INTCON1_START 33
+#define IRQ_U300_INTCON0_START 32
+#define IRQ_U300_INTCON1_START 64
/* These are on INTCON0 - 30 lines */
-#define IRQ_U300_IRQ0_EXT 1
-#define IRQ_U300_IRQ1_EXT 2
-#define IRQ_U300_DMA 3
-#define IRQ_U300_VIDEO_ENC_0 4
-#define IRQ_U300_VIDEO_ENC_1 5
-#define IRQ_U300_AAIF_RX 6
-#define IRQ_U300_AAIF_TX 7
-#define IRQ_U300_AAIF_VGPIO 8
-#define IRQ_U300_AAIF_WAKEUP 9
-#define IRQ_U300_PCM_I2S0_FRAME 10
-#define IRQ_U300_PCM_I2S0_FIFO 11
-#define IRQ_U300_PCM_I2S1_FRAME 12
-#define IRQ_U300_PCM_I2S1_FIFO 13
-#define IRQ_U300_XGAM_GAMCON 14
-#define IRQ_U300_XGAM_CDI 15
-#define IRQ_U300_XGAM_CDICON 16
-#define IRQ_U300_XGAM_PDI 18
-#define IRQ_U300_XGAM_PDICON 19
-#define IRQ_U300_XGAM_GAMEACC 20
-#define IRQ_U300_XGAM_MCIDCT 21
-#define IRQ_U300_APEX 22
-#define IRQ_U300_UART0 23
-#define IRQ_U300_SPI 24
-#define IRQ_U300_TIMER_APP_OS 25
-#define IRQ_U300_TIMER_APP_DD 26
-#define IRQ_U300_TIMER_APP_GP1 27
-#define IRQ_U300_TIMER_APP_GP2 28
-#define IRQ_U300_TIMER_OS 29
-#define IRQ_U300_TIMER_MS 30
-#define IRQ_U300_KEYPAD_KEYBF 31
-#define IRQ_U300_KEYPAD_KEYBR 32
+#define IRQ_U300_IRQ0_EXT 32
+#define IRQ_U300_IRQ1_EXT 33
+#define IRQ_U300_DMA 34
+#define IRQ_U300_VIDEO_ENC_0 35
+#define IRQ_U300_VIDEO_ENC_1 36
+#define IRQ_U300_AAIF_RX 37
+#define IRQ_U300_AAIF_TX 38
+#define IRQ_U300_AAIF_VGPIO 39
+#define IRQ_U300_AAIF_WAKEUP 40
+#define IRQ_U300_PCM_I2S0_FRAME 41
+#define IRQ_U300_PCM_I2S0_FIFO 42
+#define IRQ_U300_PCM_I2S1_FRAME 43
+#define IRQ_U300_PCM_I2S1_FIFO 44
+#define IRQ_U300_XGAM_GAMCON 45
+#define IRQ_U300_XGAM_CDI 46
+#define IRQ_U300_XGAM_CDICON 47
+#define IRQ_U300_XGAM_PDI 49
+#define IRQ_U300_XGAM_PDICON 50
+#define IRQ_U300_XGAM_GAMEACC 51
+#define IRQ_U300_XGAM_MCIDCT 52
+#define IRQ_U300_APEX 53
+#define IRQ_U300_UART0 54
+#define IRQ_U300_SPI 55
+#define IRQ_U300_TIMER_APP_OS 56
+#define IRQ_U300_TIMER_APP_DD 57
+#define IRQ_U300_TIMER_APP_GP1 58
+#define IRQ_U300_TIMER_APP_GP2 59
+#define IRQ_U300_TIMER_OS 60
+#define IRQ_U300_TIMER_MS 61
+#define IRQ_U300_KEYPAD_KEYBF 62
+#define IRQ_U300_KEYPAD_KEYBR 63
/* These are on INTCON1 - 32 lines */
-#define IRQ_U300_GPIO_PORT0 33
-#define IRQ_U300_GPIO_PORT1 34
-#define IRQ_U300_GPIO_PORT2 35
+#define IRQ_U300_GPIO_PORT0 64
+#define IRQ_U300_GPIO_PORT1 65
+#define IRQ_U300_GPIO_PORT2 66
/* These are for DB3150, DB3200 and DB3350 */
-#define IRQ_U300_WDOG 36
-#define IRQ_U300_EVHIST 37
-#define IRQ_U300_MSPRO 38
-#define IRQ_U300_MMCSD_MCIINTR0 39
-#define IRQ_U300_MMCSD_MCIINTR1 40
-#define IRQ_U300_I2C0 41
-#define IRQ_U300_I2C1 42
-#define IRQ_U300_RTC 43
-#define IRQ_U300_NFIF 44
-#define IRQ_U300_NFIF2 45
+#define IRQ_U300_WDOG 67
+#define IRQ_U300_EVHIST 68
+#define IRQ_U300_MSPRO 69
+#define IRQ_U300_MMCSD_MCIINTR0 70
+#define IRQ_U300_MMCSD_MCIINTR1 71
+#define IRQ_U300_I2C0 72
+#define IRQ_U300_I2C1 73
+#define IRQ_U300_RTC 74
+#define IRQ_U300_NFIF 75
+#define IRQ_U300_NFIF2 76
/* The DB3350-specific interrupt lines */
-#define IRQ_U300_ISP_F0 46
-#define IRQ_U300_ISP_F1 47
-#define IRQ_U300_ISP_F2 48
-#define IRQ_U300_ISP_F3 49
-#define IRQ_U300_ISP_F4 50
-#define IRQ_U300_GPIO_PORT3 51
-#define IRQ_U300_SYSCON_PLL_LOCK 52
-#define IRQ_U300_UART1 53
-#define IRQ_U300_GPIO_PORT4 54
-#define IRQ_U300_GPIO_PORT5 55
-#define IRQ_U300_GPIO_PORT6 56
-#define U300_VIC_IRQS_END 57
-
-/* Maximum 8*7 GPIO lines */
-#ifdef CONFIG_PINCTRL_COH901
-#define IRQ_U300_GPIO_BASE (U300_VIC_IRQS_END)
-#define IRQ_U300_GPIO_END (IRQ_U300_GPIO_BASE + 56)
-#else
-#define IRQ_U300_GPIO_END (U300_VIC_IRQS_END)
-#endif
-
-#define NR_IRQS_U300 (IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START)
+#define IRQ_U300_ISP_F0 77
+#define IRQ_U300_ISP_F1 78
+#define IRQ_U300_ISP_F2 79
+#define IRQ_U300_ISP_F3 80
+#define IRQ_U300_ISP_F4 81
+#define IRQ_U300_GPIO_PORT3 82
+#define IRQ_U300_SYSCON_PLL_LOCK 83
+#define IRQ_U300_UART1 84
+#define IRQ_U300_GPIO_PORT4 85
+#define IRQ_U300_GPIO_PORT5 86
+#define IRQ_U300_GPIO_PORT6 87
+#define U300_VIC_IRQS_END 88
#endif
diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c
index 070629a..33631c9 100644
--- a/arch/arm/mach-ux500/board-mop500-audio.c
+++ b/arch/arm/mach-ux500/board-mop500-audio.c
@@ -7,9 +7,8 @@
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/gpio.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
-#include <plat/gpio-nomadik.h>
-#include <plat/pincfg.h>
#include <plat/ste_dma40.h>
#include <mach/devices.h>
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index a267c6d..c34d4ef 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -9,10 +9,9 @@
#include <linux/bug.h>
#include <linux/string.h>
#include <linux/pinctrl/machine.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
#include <asm/mach-types.h>
-#include <plat/pincfg.h>
-#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 416d436..0a3dd60 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -37,13 +37,13 @@
#include <linux/of_platform.h>
#include <linux/leds.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
#include <plat/ste_dma40.h>
-#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/setup.h>
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index bcdfe6b..91f028c 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -17,14 +17,14 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mfd/abx500/ab8500.h>
+#include <linux/platform_data/usb-musb-ux500.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
#include <asm/pmu.h>
#include <asm/mach/map.h>
-#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
-#include <linux/platform_data/usb-musb-ux500.h>
#include <mach/db8500-regs.h>
#include "devices-db8500.h"
@@ -158,7 +158,7 @@ static void __init db8500_add_gpios(struct device *parent)
dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base),
IRQ_DB8500_GPIO0, &pdata);
- dbx500_add_pinctrl(parent, "pinctrl-db8500");
+ dbx500_add_pinctrl(parent, "pinctrl-db8500", U8500_PRCMU_BASE);
}
static int usb_db8500_rx_dma_cfg[] = {
@@ -214,9 +214,6 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500)
db8500_add_gpios(parent);
db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
- platform_device_register_data(parent,
- "cpufreq-u8500", -1, NULL, 0);
-
for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
platform_devs[i]->dev.parent = parent;
@@ -236,9 +233,6 @@ struct device * __init u8500_of_init_devices(void)
db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
- platform_device_register_data(parent,
- "cpufreq-u8500", -1, NULL, 0);
-
u8500_dma40_device.dev.parent = parent;
/*
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index dfdd4a5..692a77a 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -11,8 +11,7 @@
#include <linux/irq.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
-
-#include <plat/gpio-nomadik.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
index 7fbf0ba..96fa4ac 100644
--- a/arch/arm/mach-ux500/devices-common.h
+++ b/arch/arm/mach-ux500/devices-common.h
@@ -129,12 +129,18 @@ void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
int irq, struct nmk_gpio_platform_data *pdata);
static inline void
-dbx500_add_pinctrl(struct device *parent, const char *name)
+dbx500_add_pinctrl(struct device *parent, const char *name,
+ resource_size_t base)
{
+ struct resource res[] = {
+ DEFINE_RES_MEM(base, SZ_8K),
+ };
struct platform_device_info pdevinfo = {
.parent = parent,
.name = name,
.id = -1,
+ .res = res,
+ .num_res = ARRAY_SIZE(res),
};
platform_device_register_full(&pdevinfo);
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 560e0df..359f782 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -589,7 +589,7 @@ void __init v2m_dt_init_early(void)
return;
/* Confirm board type against DT property, if available */
- if (of_property_read_u32(allnodes, "arm,hbi", &dt_hbi) == 0) {
+ if (of_property_read_u32(of_allnodes, "arm,hbi", &dt_hbi) == 0) {
int site = v2m_get_master_site();
u32 id = readl(v2m_sysreg_base + (site == SYS_CFG_SITE_DB2 ?
V2M_SYS_PROCID1 : V2M_SYS_PROCID0));
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index ce8cb19..89f2b7f 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -279,7 +279,7 @@ void arch_pick_mmap_layout(struct mm_struct *mm)
* You really shouldn't be using read() or write() on /dev/mem. This
* might go away in the future.
*/
-int valid_phys_addr_range(unsigned long addr, size_t size)
+int valid_phys_addr_range(phys_addr_t addr, size_t size)
{
if (addr < PHYS_OFFSET)
return 0;
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 86b8b48..09c5233 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -89,7 +89,7 @@ ENTRY(cpu_v6_dcache_clean_area)
mov pc, lr
/*
- * cpu_arm926_switch_mm(pgd_phys, tsk)
+ * cpu_v6_switch_mm(pgd_phys, tsk)
*
* Set the translation table base pointer to be pgd_phys
*
diff --git a/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h
deleted file mode 100644
index c08a54d..0000000
--- a/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Structures and registers for GPIO access in the Nomadik SoC
- *
- * Copyright (C) 2008 STMicroelectronics
- * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
- * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PLAT_NOMADIK_GPIO
-#define __PLAT_NOMADIK_GPIO
-
-/*
- * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
- * the "gpio" namespace for generic and cross-machine functions
- */
-
-/* Register in the logic block */
-#define NMK_GPIO_DAT 0x00
-#define NMK_GPIO_DATS 0x04
-#define NMK_GPIO_DATC 0x08
-#define NMK_GPIO_PDIS 0x0c
-#define NMK_GPIO_DIR 0x10
-#define NMK_GPIO_DIRS 0x14
-#define NMK_GPIO_DIRC 0x18
-#define NMK_GPIO_SLPC 0x1c
-#define NMK_GPIO_AFSLA 0x20
-#define NMK_GPIO_AFSLB 0x24
-#define NMK_GPIO_LOWEMI 0x28
-
-#define NMK_GPIO_RIMSC 0x40
-#define NMK_GPIO_FIMSC 0x44
-#define NMK_GPIO_IS 0x48
-#define NMK_GPIO_IC 0x4c
-#define NMK_GPIO_RWIMSC 0x50
-#define NMK_GPIO_FWIMSC 0x54
-#define NMK_GPIO_WKS 0x58
-
-/* Alternate functions: function C is set in hw by setting both A and B */
-#define NMK_GPIO_ALT_GPIO 0
-#define NMK_GPIO_ALT_A 1
-#define NMK_GPIO_ALT_B 2
-#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
-
-#define NMK_GPIO_ALT_CX_SHIFT 2
-#define NMK_GPIO_ALT_C1 ((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-#define NMK_GPIO_ALT_C2 ((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-#define NMK_GPIO_ALT_C3 ((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-#define NMK_GPIO_ALT_C4 ((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-
-/* Pull up/down values */
-enum nmk_gpio_pull {
- NMK_GPIO_PULL_NONE,
- NMK_GPIO_PULL_UP,
- NMK_GPIO_PULL_DOWN,
-};
-
-/* Sleep mode */
-enum nmk_gpio_slpm {
- NMK_GPIO_SLPM_INPUT,
- NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT,
- NMK_GPIO_SLPM_NOCHANGE,
- NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE,
-};
-
-extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode);
-extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull);
-#ifdef CONFIG_PINCTRL_NOMADIK
-extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
-#else
-static inline int nmk_gpio_set_mode(int gpio, int gpio_mode)
-{
- return -ENODEV;
-}
-#endif
-extern int nmk_gpio_get_mode(int gpio);
-
-extern void nmk_gpio_wakeups_suspend(void);
-extern void nmk_gpio_wakeups_resume(void);
-
-extern void nmk_gpio_clocks_enable(void);
-extern void nmk_gpio_clocks_disable(void);
-
-extern void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up);
-
-/*
- * Platform data to register a block: only the initial gpio/irq number.
- */
-struct nmk_gpio_platform_data {
- char *name;
- int first_gpio;
- int first_irq;
- int num_gpio;
- u32 (*get_secondary_status)(unsigned int bank);
- void (*set_ioforce)(bool enable);
- bool supports_sleepmode;
-};
-
-#endif /* __PLAT_NOMADIK_GPIO */
diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h
deleted file mode 100644
index 3b8ec60..0000000
--- a/arch/arm/plat-nomadik/include/plat/pincfg.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License, version 2
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- *
- * Based on arch/arm/mach-pxa/include/mach/mfp.h:
- * Copyright (C) 2007 Marvell International Ltd.
- * eric miao <eric.miao@marvell.com>
- */
-
-#ifndef __PLAT_PINCFG_H
-#define __PLAT_PINCFG_H
-
-/*
- * pin configurations are represented by 32-bit integers:
- *
- * bit 0.. 8 - Pin Number (512 Pins Maximum)
- * bit 9..10 - Alternate Function Selection
- * bit 11..12 - Pull up/down state
- * bit 13 - Sleep mode behaviour
- * bit 14 - Direction
- * bit 15 - Value (if output)
- * bit 16..18 - SLPM pull up/down state
- * bit 19..20 - SLPM direction
- * bit 21..22 - SLPM Value (if output)
- * bit 23..25 - PDIS value (if input)
- * bit 26 - Gpio mode
- * bit 27 - Sleep mode
- *
- * to facilitate the definition, the following macros are provided
- *
- * PIN_CFG_DEFAULT - default config (0):
- * pull up/down = disabled
- * sleep mode = input/wakeup
- * direction = input
- * value = low
- * SLPM direction = same as normal
- * SLPM pull = same as normal
- * SLPM value = same as normal
- *
- * PIN_CFG - default config with alternate function
- */
-
-typedef unsigned long pin_cfg_t;
-
-#define PIN_NUM_MASK 0x1ff
-#define PIN_NUM(x) ((x) & PIN_NUM_MASK)
-
-#define PIN_ALT_SHIFT 9
-#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT)
-#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT)
-#define PIN_GPIO (NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT)
-#define PIN_ALT_A (NMK_GPIO_ALT_A << PIN_ALT_SHIFT)
-#define PIN_ALT_B (NMK_GPIO_ALT_B << PIN_ALT_SHIFT)
-#define PIN_ALT_C (NMK_GPIO_ALT_C << PIN_ALT_SHIFT)
-
-#define PIN_PULL_SHIFT 11
-#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT)
-#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT)
-#define PIN_PULL_NONE (NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT)
-#define PIN_PULL_UP (NMK_GPIO_PULL_UP << PIN_PULL_SHIFT)
-#define PIN_PULL_DOWN (NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT)
-
-#define PIN_SLPM_SHIFT 13
-#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT)
-#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT)
-#define PIN_SLPM_MAKE_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT)
-#define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT)
-/* These two replace the above in DB8500v2+ */
-#define PIN_SLPM_WAKEUP_ENABLE (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT)
-#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT)
-#define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE
-
-#define PIN_SLPM_GPIO PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */
-#define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */
-
-#define PIN_DIR_SHIFT 14
-#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT)
-#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT)
-#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT)
-#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT)
-
-#define PIN_VAL_SHIFT 15
-#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT)
-#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT)
-#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT)
-#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT)
-
-#define PIN_SLPM_PULL_SHIFT 16
-#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL(x) \
- (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL_NONE \
- ((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL_UP \
- ((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL_DOWN \
- ((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT)
-
-#define PIN_SLPM_DIR_SHIFT 19
-#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT)
-#define PIN_SLPM_DIR(x) \
- (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT)
-#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT)
-#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT)
-
-#define PIN_SLPM_VAL_SHIFT 21
-#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT)
-#define PIN_SLPM_VAL(x) \
- (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT)
-#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT)
-#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT)
-
-#define PIN_SLPM_PDIS_SHIFT 23
-#define PIN_SLPM_PDIS_MASK (0x3 << PIN_SLPM_PDIS_SHIFT)
-#define PIN_SLPM_PDIS(x) \
- (((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT)
-#define PIN_SLPM_PDIS_NO_CHANGE (0 << PIN_SLPM_PDIS_SHIFT)
-#define PIN_SLPM_PDIS_DISABLED (1 << PIN_SLPM_PDIS_SHIFT)
-#define PIN_SLPM_PDIS_ENABLED (2 << PIN_SLPM_PDIS_SHIFT)
-
-#define PIN_LOWEMI_SHIFT 25
-#define PIN_LOWEMI_MASK (0x1 << PIN_LOWEMI_SHIFT)
-#define PIN_LOWEMI(x) (((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT)
-#define PIN_LOWEMI_DISABLED (0 << PIN_LOWEMI_SHIFT)
-#define PIN_LOWEMI_ENABLED (1 << PIN_LOWEMI_SHIFT)
-
-#define PIN_GPIOMODE_SHIFT 26
-#define PIN_GPIOMODE_MASK (0x1 << PIN_GPIOMODE_SHIFT)
-#define PIN_GPIOMODE(x) (((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT)
-#define PIN_GPIOMODE_DISABLED (0 << PIN_GPIOMODE_SHIFT)
-#define PIN_GPIOMODE_ENABLED (1 << PIN_GPIOMODE_SHIFT)
-
-#define PIN_SLEEPMODE_SHIFT 27
-#define PIN_SLEEPMODE_MASK (0x1 << PIN_SLEEPMODE_SHIFT)
-#define PIN_SLEEPMODE(x) (((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT)
-#define PIN_SLEEPMODE_DISABLED (0 << PIN_SLEEPMODE_SHIFT)
-#define PIN_SLEEPMODE_ENABLED (1 << PIN_SLEEPMODE_SHIFT)
-
-
-/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */
-#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN)
-#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP)
-#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE)
-#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW)
-#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH)
-
-#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN)
-#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP)
-#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE)
-#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW)
-#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH)
-
-#define PIN_CFG_DEFAULT (0)
-
-#define PIN_CFG(num, alt) \
- (PIN_CFG_DEFAULT |\
- (PIN_NUM(num) | PIN_##alt))
-
-#define PIN_CFG_INPUT(num, alt, pull) \
- (PIN_CFG_DEFAULT |\
- (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull))
-
-#define PIN_CFG_OUTPUT(num, alt, val) \
- (PIN_CFG_DEFAULT |\
- (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val))
-
-extern int nmk_config_pin(pin_cfg_t cfg, bool sleep);
-extern int nmk_config_pins(pin_cfg_t *cfgs, int num);
-extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num);
-
-#endif
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index a5683a8..6013831 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -26,12 +26,14 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
+#include <linux/i2c-omap.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <mach/irqs.h>
#include <plat/i2c.h>
+#include <plat/omap-pm.h>
#include <plat/omap_device.h>
#define OMAP_I2C_SIZE 0x3f
@@ -127,6 +129,16 @@ static inline int omap1_i2c_add_bus(int bus_id)
#ifdef CONFIG_ARCH_OMAP2PLUS
+/*
+ * XXX This function is a temporary compatibility wrapper - only
+ * needed until the I2C driver can be converted to call
+ * omap_pm_set_max_dev_wakeup_lat() and handle a return code.
+ */
+static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t)
+{
+ omap_pm_set_max_mpu_wakeup_lat(dev, t);
+}
+
static inline int omap2_i2c_add_bus(int bus_id)
{
int l;
@@ -158,6 +170,15 @@ static inline int omap2_i2c_add_bus(int bus_id)
dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
pdata->flags = dev_attr->flags;
+ /*
+ * When waiting for completion of a i2c transfer, we need to
+ * set a wake up latency constraint for the MPU. This is to
+ * ensure quick enough wakeup from idle, when transfer
+ * completes.
+ * Only omap3 has support for constraints
+ */
+ if (cpu_is_omap34xx())
+ pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
pdev = omap_device_build(name, bus_id, oh, pdata,
sizeof(struct omap_i2c_bus_platform_data),
NULL, 0, 0);
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index 8b4e4f2..346af5b 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -126,6 +126,7 @@ struct omap_mmc_platform_data {
/* we can put the features above into this variable */
#define HSMMC_HAS_PBIAS (1 << 0)
#define HSMMC_HAS_UPDATED_RESET (1 << 1)
+#define HSMMC_HAS_HSPE_SUPPORT (1 << 2)
unsigned features;
int switch_pin; /* gpio (card detect) */
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index db98e70..0abd1c4 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -473,12 +473,13 @@ int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n",
chan->number, __func__, buf);
- if (chan->end == NULL)
+ if (chan->end == NULL) {
pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n",
chan->number, __func__, chan);
-
- chan->end->next = buf;
- chan->end = buf;
+ } else {
+ chan->end->next = buf;
+ chan->end = buf;
+ }
}
/* if necessary, update the next buffer field */
diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig
index f8db7b2..87dbd81 100644
--- a/arch/arm/plat-spear/Kconfig
+++ b/arch/arm/plat-spear/Kconfig
@@ -12,6 +12,7 @@ config ARCH_SPEAR13XX
bool "ST SPEAr13xx with Device Tree"
select ARM_GIC
select CPU_V7
+ select GPIO_SPEAR_SPICS
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 364191f..c95c5cb 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -41,20 +41,24 @@ libs-y := arch/arm64/lib/ $(libs-y)
libs-y += $(LIBGCC)
# Default target when executing plain make
-KBUILD_IMAGE := Image.gz
+KBUILD_IMAGE := Image.gz
+KBUILD_DTBS := dtbs
-all: $(KBUILD_IMAGE)
+all: $(KBUILD_IMAGE) $(KBUILD_DTBS)
boot := arch/arm64/boot
Image Image.gz: vmlinux
- $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+ $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
zinstall install: vmlinux
- $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
+ $(Q)$(MAKE) $(build)=$(boot) $@
-%.dtb:
- $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+%.dtb: scripts
+ $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@
+
+dtbs: scripts
+ $(Q)$(MAKE) $(build)=$(boot)/dts dtbs
# We use MRPROPER_FILES and CLEAN_FILES now
archclean:
@@ -63,6 +67,7 @@ archclean:
define archhelp
echo '* Image.gz - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)'
echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
+ echo '* dtbs - Build device tree blobs for enabled boards'
echo ' install - Install uncompressed kernel'
echo ' zinstall - Install compressed kernel'
echo ' Install using (your) ~/bin/installkernel or'
diff --git a/arch/arm64/boot/Makefile b/arch/arm64/boot/Makefile
index eca209b..5a0e3ab 100644
--- a/arch/arm64/boot/Makefile
+++ b/arch/arm64/boot/Makefile
@@ -22,9 +22,6 @@ $(obj)/Image: vmlinux FORCE
$(obj)/Image.gz: $(obj)/Image FORCE
$(call if_changed,gzip)
-$(obj)/%.dtb: $(src)/dts/%.dts
- $(call cmd,dtc)
-
install: $(obj)/Image
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
$(obj)/Image System.map "$(INSTALL_PATH)"
@@ -32,5 +29,3 @@ install: $(obj)/Image
zinstall: $(obj)/Image.gz
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
$(obj)/Image.gz System.map "$(INSTALL_PATH)"
-
-clean-files += *.dtb
diff --git a/arch/arm64/boot/dts/.gitignore b/arch/arm64/boot/dts/.gitignore
new file mode 100644
index 0000000..b60ed20
--- /dev/null
+++ b/arch/arm64/boot/dts/.gitignore
@@ -0,0 +1 @@
+*.dtb
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
new file mode 100644
index 0000000..801e2d7
--- /dev/null
+++ b/arch/arm64/boot/dts/Makefile
@@ -0,0 +1,5 @@
+targets += dtbs
+
+dtbs: $(addprefix $(obj)/, $(dtb-y))
+
+clean-files := *.dtb
diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h
index 6d909fa..656a6f2 100644
--- a/arch/arm64/include/asm/unistd32.h
+++ b/arch/arm64/include/asm/unistd32.h
@@ -392,7 +392,7 @@ __SYSCALL(367, sys_fanotify_init)
__SYSCALL(368, compat_sys_fanotify_mark_wrapper)
__SYSCALL(369, sys_prlimit64)
__SYSCALL(370, sys_name_to_handle_at)
-__SYSCALL(371, sys_open_by_handle_at)
+__SYSCALL(371, compat_sys_open_by_handle_at)
__SYSCALL(372, sys_clock_adjtime)
__SYSCALL(373, sys_syncfs)
diff --git a/arch/c6x/Makefile b/arch/c6x/Makefile
index a9eb959..e72eb34 100644
--- a/arch/c6x/Makefile
+++ b/arch/c6x/Makefile
@@ -41,7 +41,7 @@ DTB:=$(subst dtbImage.,,$(filter dtbImage.%, $(MAKECMDGOALS)))
export DTB
ifneq ($(DTB),)
-core-y += $(boot)/
+core-y += $(boot)/dts/
endif
# With make 3.82 we cannot mix normal and wildcard targets
diff --git a/arch/c6x/boot/Makefile b/arch/c6x/boot/Makefile
index 6891257..8734abe 100644
--- a/arch/c6x/boot/Makefile
+++ b/arch/c6x/boot/Makefile
@@ -6,25 +6,5 @@ OBJCOPYFLAGS_vmlinux.bin := -O binary
$(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
-DTC_FLAGS ?= -p 1024
-
-ifneq ($(DTB),)
-obj-y += linked_dtb.o
-endif
-
-$(obj)/%.dtb: $(src)/dts/%.dts FORCE
- $(call if_changed_dep,dtc)
-
-quiet_cmd_cp = CP $< $@$2
- cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
-
-# Generate builtin.dtb from $(DTB).dtb
-$(obj)/builtin.dtb: $(obj)/$(DTB).dtb
- $(call if_changed,cp)
-
-$(obj)/linked_dtb.o: $(obj)/builtin.dtb
-
$(obj)/dtbImage.%: vmlinux
$(call if_changed,objcopy)
-
-clean-files := $(obj)/*.dtb
diff --git a/arch/c6x/boot/dts/Makefile b/arch/c6x/boot/dts/Makefile
new file mode 100644
index 0000000..c7528b0
--- /dev/null
+++ b/arch/c6x/boot/dts/Makefile
@@ -0,0 +1,20 @@
+#
+# Makefile for device trees
+#
+
+DTC_FLAGS ?= -p 1024
+
+ifneq ($(DTB),)
+obj-y += linked_dtb.o
+endif
+
+quiet_cmd_cp = CP $< $@$2
+ cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
+
+# Generate builtin.dtb from $(DTB).dtb
+$(obj)/builtin.dtb: $(obj)/$(DTB).dtb
+ $(call if_changed,cp)
+
+$(obj)/linked_dtb.o: $(obj)/builtin.dtb
+
+clean-files := *.dtb
diff --git a/arch/c6x/boot/dts/linked_dtb.S b/arch/c6x/boot/dts/linked_dtb.S
new file mode 100644
index 0000000..cf347f1
--- /dev/null
+++ b/arch/c6x/boot/dts/linked_dtb.S
@@ -0,0 +1,2 @@
+.section __fdt_blob,"a"
+.incbin "arch/c6x/boot/dts/builtin.dtb"
diff --git a/arch/c6x/boot/linked_dtb.S b/arch/c6x/boot/linked_dtb.S
deleted file mode 100644
index 57a4454..0000000
--- a/arch/c6x/boot/linked_dtb.S
+++ /dev/null
@@ -1,2 +0,0 @@
-.section __fdt_blob,"a"
-.incbin "arch/c6x/boot/builtin.dtb"
diff --git a/arch/c6x/include/asm/setup.h b/arch/c6x/include/asm/setup.h
new file mode 100644
index 0000000..ecead15
--- /dev/null
+++ b/arch/c6x/include/asm/setup.h
@@ -0,0 +1,33 @@
+/*
+ * Port on Texas Instruments TMS320C6x architecture
+ *
+ * Copyright (C) 2004, 2009, 2010 2011 Texas Instruments Incorporated
+ * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASM_C6X_SETUP_H
+#define _ASM_C6X_SETUP_H
+
+#include <uapi/asm/setup.h>
+
+#ifndef __ASSEMBLY__
+extern char c6x_command_line[COMMAND_LINE_SIZE];
+
+extern int c6x_add_memory(phys_addr_t start, unsigned long size);
+
+extern unsigned long ram_start;
+extern unsigned long ram_end;
+
+extern int c6x_num_cores;
+extern unsigned int c6x_silicon_rev;
+extern unsigned int c6x_devstat;
+extern unsigned char c6x_fuse_mac[6];
+
+extern void machine_init(unsigned long dt_ptr);
+extern void time_init(void);
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_C6X_SETUP_H */
diff --git a/arch/c6x/include/uapi/asm/Kbuild b/arch/c6x/include/uapi/asm/Kbuild
index c312b42..e9bc2b2 100644
--- a/arch/c6x/include/uapi/asm/Kbuild
+++ b/arch/c6x/include/uapi/asm/Kbuild
@@ -1,6 +1,8 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
+generic-y += kvm_para.h
+
header-y += byteorder.h
header-y += kvm_para.h
header-y += ptrace.h
diff --git a/arch/c6x/include/uapi/asm/kvm_para.h b/arch/c6x/include/uapi/asm/kvm_para.h
deleted file mode 100644
index 14fab8f..0000000
--- a/arch/c6x/include/uapi/asm/kvm_para.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kvm_para.h>
diff --git a/arch/c6x/include/uapi/asm/setup.h b/arch/c6x/include/uapi/asm/setup.h
index a01e318..ad9ac97 100644
--- a/arch/c6x/include/uapi/asm/setup.h
+++ b/arch/c6x/include/uapi/asm/setup.h
@@ -1,33 +1,6 @@
-/*
- * Port on Texas Instruments TMS320C6x architecture
- *
- * Copyright (C) 2004, 2009, 2010 2011 Texas Instruments Incorporated
- * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASM_C6X_SETUP_H
-#define _ASM_C6X_SETUP_H
+#ifndef _UAPI_ASM_C6X_SETUP_H
+#define _UAPI_ASM_C6X_SETUP_H
#define COMMAND_LINE_SIZE 1024
-#ifndef __ASSEMBLY__
-extern char c6x_command_line[COMMAND_LINE_SIZE];
-
-extern int c6x_add_memory(phys_addr_t start, unsigned long size);
-
-extern unsigned long ram_start;
-extern unsigned long ram_end;
-
-extern int c6x_num_cores;
-extern unsigned int c6x_silicon_rev;
-extern unsigned int c6x_devstat;
-extern unsigned char c6x_fuse_mac[6];
-
-extern void machine_init(unsigned long dt_ptr);
-extern void time_init(void);
-
-#endif /* !__ASSEMBLY__ */
-#endif /* _ASM_C6X_SETUP_H */
+#endif /* _UAPI_ASM_C6X_SETUP_H */
diff --git a/arch/c6x/kernel/entry.S b/arch/c6x/kernel/entry.S
index 5449c36..0ed6157 100644
--- a/arch/c6x/kernel/entry.S
+++ b/arch/c6x/kernel/entry.S
@@ -277,6 +277,8 @@ work_rescheduled:
[A1] BNOP .S1 work_resched,5
work_notifysig:
+ ;; enable interrupts for do_notify_resume()
+ UNMASK_INT B2
B .S2 do_notify_resume
LDW .D2T1 *+SP(REGS__END+8),A6 ; syscall flag
ADDKPC .S2 resume_userspace,B3,1
@@ -427,8 +429,7 @@ ENTRY(ret_from_kernel_execve)
ENDPROC(ret_from_kernel_execve)
;;
- ;; These are the interrupt handlers, responsible for calling __do_IRQ()
- ;; int6 is used for syscalls (see _system_call entry)
+ ;; These are the interrupt handlers, responsible for calling c6x_do_IRQ()
;;
.macro SAVE_ALL_INT
SAVE_ALL IRP,ITSR
diff --git a/arch/ia64/include/asm/device.h b/arch/ia64/include/asm/device.h
index d05e78f..f69c32f 100644
--- a/arch/ia64/include/asm/device.h
+++ b/arch/ia64/include/asm/device.h
@@ -7,9 +7,6 @@
#define _ASM_IA64_DEVICE_H
struct dev_archdata {
-#ifdef CONFIG_ACPI
- void *acpi_handle;
-#endif
#ifdef CONFIG_INTEL_IOMMU
void *iommu; /* hook for IOMMU specific extension */
#endif
diff --git a/arch/ia64/include/asm/io.h b/arch/ia64/include/asm/io.h
index 2c26321..74a7cc3 100644
--- a/arch/ia64/include/asm/io.h
+++ b/arch/ia64/include/asm/io.h
@@ -90,7 +90,7 @@ phys_to_virt (unsigned long address)
#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
extern u64 kern_mem_attribute (unsigned long phys_addr, unsigned long size);
-extern int valid_phys_addr_range (unsigned long addr, size_t count); /* efi.c */
+extern int valid_phys_addr_range (phys_addr_t addr, size_t count); /* efi.c */
extern int valid_mmap_phys_addr_range (unsigned long pfn, size_t count);
/*
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 44057885..e9682f5 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -633,6 +633,7 @@ int acpi_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
ACPI_EDGE_SENSITIVE) ? IOSAPIC_EDGE :
IOSAPIC_LEVEL);
}
+EXPORT_SYMBOL_GPL(acpi_register_gsi);
void acpi_unregister_gsi(u32 gsi)
{
@@ -644,6 +645,7 @@ void acpi_unregister_gsi(u32 gsi)
iosapic_unregister_intr(gsi);
}
+EXPORT_SYMBOL_GPL(acpi_unregister_gsi);
static int __init acpi_parse_fadt(struct acpi_table_header *table)
{
diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c
index d37bbd4..f034563 100644
--- a/arch/ia64/kernel/efi.c
+++ b/arch/ia64/kernel/efi.c
@@ -870,7 +870,7 @@ kern_mem_attribute (unsigned long phys_addr, unsigned long size)
EXPORT_SYMBOL(kern_mem_attribute);
int
-valid_phys_addr_range (unsigned long phys_addr, unsigned long size)
+valid_phys_addr_range (phys_addr_t phys_addr, unsigned long size)
{
u64 attr;
diff --git a/arch/m68k/include/asm/signal.h b/arch/m68k/include/asm/signal.h
index 67e489d..2df26b5 100644
--- a/arch/m68k/include/asm/signal.h
+++ b/arch/m68k/include/asm/signal.h
@@ -41,7 +41,7 @@ struct k_sigaction {
static inline void sigaddset(sigset_t *set, int _sig)
{
asm ("bfset %0{%1,#1}"
- : "+od" (*set)
+ : "+o" (*set)
: "id" ((_sig - 1) ^ 31)
: "cc");
}
@@ -49,7 +49,7 @@ static inline void sigaddset(sigset_t *set, int _sig)
static inline void sigdelset(sigset_t *set, int _sig)
{
asm ("bfclr %0{%1,#1}"
- : "+od" (*set)
+ : "+o" (*set)
: "id" ((_sig - 1) ^ 31)
: "cc");
}
@@ -65,7 +65,7 @@ static inline int __gen_sigismember(sigset_t *set, int _sig)
int ret;
asm ("bfextu %1{%2,#1},%0"
: "=d" (ret)
- : "od" (*set), "id" ((_sig-1) ^ 31)
+ : "o" (*set), "id" ((_sig-1) ^ 31)
: "cc");
return ret;
}
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index b23c40e..d26fb90 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -57,7 +57,7 @@ boot := arch/microblaze/boot
DTB:=$(subst simpleImage.,,$(filter simpleImage.%, $(MAKECMDGOALS)))
ifneq ($(DTB),)
- core-y += $(boot)/
+ core-y += $(boot)/dts/
endif
# defines filename extension depending memory management type
diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile
index fa83ea4..80fe54f 100644
--- a/arch/microblaze/boot/Makefile
+++ b/arch/microblaze/boot/Makefile
@@ -2,21 +2,10 @@
# arch/microblaze/boot/Makefile
#
-obj-y += linked_dtb.o
-
targets := linux.bin linux.bin.gz simpleImage.%
OBJCOPYFLAGS := -R .note -R .comment -R .note.gnu.build-id -O binary
-# Ensure system.dtb exists
-$(obj)/linked_dtb.o: $(obj)/system.dtb
-
-# Generate system.dtb from $(DTB).dtb
-ifneq ($(DTB),system)
-$(obj)/system.dtb: $(obj)/$(DTB).dtb
- $(call if_changed,cp)
-endif
-
$(obj)/linux.bin: vmlinux FORCE
$(call if_changed,objcopy)
$(call if_changed,uimage)
@@ -45,10 +34,4 @@ $(obj)/simpleImage.%: vmlinux FORCE
@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
-# Rule to build device tree blobs
-DTC_FLAGS := -p 1024
-
-$(obj)/%.dtb: $(src)/dts/%.dts FORCE
- $(call if_changed_dep,dtc)
-
-clean-files += *.dtb simpleImage.*.unstrip linux.bin.ub
+clean-files += simpleImage.*.unstrip linux.bin.ub
diff --git a/arch/microblaze/boot/dts/Makefile b/arch/microblaze/boot/dts/Makefile
new file mode 100644
index 0000000..c3b3a5d
--- /dev/null
+++ b/arch/microblaze/boot/dts/Makefile
@@ -0,0 +1,22 @@
+#
+# arch/microblaze/boot/Makefile
+#
+
+obj-y += linked_dtb.o
+
+# Ensure system.dtb exists
+$(obj)/linked_dtb.o: $(obj)/system.dtb
+
+# Generate system.dtb from $(DTB).dtb
+ifneq ($(DTB),system)
+$(obj)/system.dtb: $(obj)/$(DTB).dtb
+ $(call if_changed,cp)
+endif
+
+quiet_cmd_cp = CP $< $@$2
+ cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
+
+# Rule to build device tree blobs
+DTC_FLAGS := -p 1024
+
+clean-files += *.dtb
diff --git a/arch/microblaze/boot/dts/linked_dtb.S b/arch/microblaze/boot/dts/linked_dtb.S
new file mode 100644
index 0000000..23345af
--- /dev/null
+++ b/arch/microblaze/boot/dts/linked_dtb.S
@@ -0,0 +1,2 @@
+.section __fdt_blob,"a"
+.incbin "arch/microblaze/boot/dts/system.dtb"
diff --git a/arch/microblaze/boot/linked_dtb.S b/arch/microblaze/boot/linked_dtb.S
deleted file mode 100644
index cb2b537..0000000
--- a/arch/microblaze/boot/linked_dtb.S
+++ /dev/null
@@ -1,3 +0,0 @@
-.section __fdt_blob,"a"
-.incbin "arch/microblaze/boot/system.dtb"
-
diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index 3847e5b..3903e3d 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -111,7 +111,7 @@ asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
/* It is more difficult to avoid calling this function than to
call it and ignore errors. */
- if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->r1))
+ if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->r1) == -EFAULT)
goto badframe;
return rval;
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index 4dbb505..a1c5b99 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -1346,8 +1346,6 @@ void __init pcibios_resource_survey(void)
pci_assign_unassigned_resources();
}
-#ifdef CONFIG_HOTPLUG
-
/* This is used by the PCI hotplug driver to allocate resource
* of newly plugged busses. We can try to consolidate with the
* rest of the code later, for now, keep it as-is as our main
@@ -1407,8 +1405,6 @@ void pcibios_finish_adding_to_bus(struct pci_bus *bus)
}
EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus);
-#endif /* CONFIG_HOTPLUG */
-
int pcibios_enable_device(struct pci_dev *dev, int mask)
{
return pci_enable_resources(dev, mask);
diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile
index bc96e29..6e927cf 100644
--- a/arch/mips/cavium-octeon/Makefile
+++ b/arch/mips/cavium-octeon/Makefile
@@ -24,9 +24,6 @@ DTB_FILES = $(patsubst %.dts, %.dtb, $(DTS_FILES))
obj-y += $(patsubst %.dts, %.dtb.o, $(DTS_FILES))
-$(obj)/%.dtb: $(src)/%.dts FORCE
- $(call if_changed_dep,dtc)
-
# Let's keep the .dtb files around in case we want to look at them.
.SECONDARY: $(addprefix $(obj)/, $(DTB_FILES))
diff --git a/arch/mips/include/asm/hugetlb.h b/arch/mips/include/asm/hugetlb.h
index bd94946..ef99db9 100644
--- a/arch/mips/include/asm/hugetlb.h
+++ b/arch/mips/include/asm/hugetlb.h
@@ -95,7 +95,17 @@ static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
pte_t *ptep, pte_t pte,
int dirty)
{
- return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+ int changed = !pte_same(*ptep, pte);
+
+ if (changed) {
+ set_pte_at(vma->vm_mm, addr, ptep, pte);
+ /*
+ * There could be some standard sized pages in there,
+ * get them all.
+ */
+ flush_tlb_range(vma, addr, addr + HPAGE_SIZE);
+ }
+ return changed;
}
static inline pte_t huge_ptep_get(pte_t *ptep)
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index b1fb7af..cce3782 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -510,7 +510,6 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
c->cputype = CPU_R3000A;
__cpu_name[cpu] = "R3000A";
}
- break;
} else {
c->cputype = CPU_R3000;
__cpu_name[cpu] = "R3000";
diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S
index a6c1332..9b00362 100644
--- a/arch/mips/kernel/entry.S
+++ b/arch/mips/kernel/entry.S
@@ -36,6 +36,11 @@ FEXPORT(ret_from_exception)
FEXPORT(ret_from_irq)
LONG_S s0, TI_REGS($28)
FEXPORT(__ret_from_irq)
+/*
+ * We can be coming here from a syscall done in the kernel space,
+ * e.g. a failed kernel_execve().
+ */
+resume_userspace_check:
LONG_L t0, PT_STATUS(sp) # returning to kernel mode?
andi t0, t0, KU_USER
beqz t0, resume_kernel
@@ -162,7 +167,7 @@ work_notifysig: # deal with pending signals and
move a0, sp
li a1, 0
jal do_notify_resume # a2 already loaded
- j resume_userspace
+ j resume_userspace_check
FEXPORT(syscall_exit_partial)
local_irq_disable # make sure need_resched doesn't
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index f6ba838..86ec03f 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -397,14 +397,14 @@ EXPORT(sysn32_call_table)
PTR sys_timerfd_create
PTR compat_sys_timerfd_gettime /* 6285 */
PTR compat_sys_timerfd_settime
- PTR sys_signalfd4
+ PTR compat_sys_signalfd4
PTR sys_eventfd2
PTR sys_epoll_create1
PTR sys_dup3 /* 6290 */
PTR sys_pipe2
PTR sys_inotify_init1
- PTR sys_preadv
- PTR sys_pwritev
+ PTR compat_sys_preadv
+ PTR compat_sys_pwritev
PTR compat_sys_rt_tgsigqueueinfo /* 6295 */
PTR sys_perf_event_open
PTR sys_accept4
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index a53f8ec..290dc6a 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -79,7 +79,7 @@ static struct resource data_resource = { .name = "Kernel data", };
void __init add_memory_region(phys_t start, phys_t size, long type)
{
int x = boot_mem_map.nr_map;
- struct boot_mem_map_entry *prev = boot_mem_map.map + x - 1;
+ int i;
/* Sanity check */
if (start + size < start) {
@@ -88,15 +88,29 @@ void __init add_memory_region(phys_t start, phys_t size, long type)
}
/*
- * Try to merge with previous entry if any. This is far less than
- * perfect but is sufficient for most real world cases.
+ * Try to merge with existing entry, if any.
*/
- if (x && prev->addr + prev->size == start && prev->type == type) {
- prev->size += size;
+ for (i = 0; i < boot_mem_map.nr_map; i++) {
+ struct boot_mem_map_entry *entry = boot_mem_map.map + i;
+ unsigned long top;
+
+ if (entry->type != type)
+ continue;
+
+ if (start + size < entry->addr)
+ continue; /* no overlap */
+
+ if (entry->addr + entry->size < start)
+ continue; /* no overlap */
+
+ top = max(entry->addr + entry->size, start + size);
+ entry->addr = min(entry->addr, start);
+ entry->size = top - entry->addr;
+
return;
}
- if (x == BOOT_MEM_MAP_MAX) {
+ if (boot_mem_map.nr_map == BOOT_MEM_MAP_MAX) {
pr_err("Ooops! Too many entries in the memory map!\n");
return;
}
diff --git a/arch/mips/lantiq/dts/Makefile b/arch/mips/lantiq/dts/Makefile
index 674fca4..6fa72dd 100644
--- a/arch/mips/lantiq/dts/Makefile
+++ b/arch/mips/lantiq/dts/Makefile
@@ -1,4 +1 @@
obj-$(CONFIG_DT_EASY50712) := easy50712.dtb.o
-
-$(obj)/%.dtb: $(obj)/%.dts
- $(call if_changed,dtc)
diff --git a/arch/mips/lib/mips-atomic.c b/arch/mips/lib/mips-atomic.c
index e091430..cd160be 100644
--- a/arch/mips/lib/mips-atomic.c
+++ b/arch/mips/lib/mips-atomic.c
@@ -56,7 +56,7 @@ __asm__(
" .set pop \n"
" .endm \n");
-void arch_local_irq_disable(void)
+notrace void arch_local_irq_disable(void)
{
preempt_disable();
__asm__ __volatile__(
@@ -93,7 +93,7 @@ __asm__(
" .set pop \n"
" .endm \n");
-unsigned long arch_local_irq_save(void)
+notrace unsigned long arch_local_irq_save(void)
{
unsigned long flags;
preempt_disable();
@@ -135,7 +135,7 @@ __asm__(
" .set pop \n"
" .endm \n");
-void arch_local_irq_restore(unsigned long flags)
+notrace void arch_local_irq_restore(unsigned long flags)
{
unsigned long __tmp1;
@@ -159,7 +159,7 @@ void arch_local_irq_restore(unsigned long flags)
EXPORT_SYMBOL(arch_local_irq_restore);
-void __arch_local_irq_restore(unsigned long flags)
+notrace void __arch_local_irq_restore(unsigned long flags)
{
unsigned long __tmp1;
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index 4b9b935..88e79ad 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -120,18 +120,11 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
if (cpu_context(cpu, mm) != 0) {
unsigned long size, flags;
- int huge = is_vm_hugetlb_page(vma);
ENTER_CRITICAL(flags);
- if (huge) {
- start = round_down(start, HPAGE_SIZE);
- end = round_up(end, HPAGE_SIZE);
- size = (end - start) >> HPAGE_SHIFT;
- } else {
- start = round_down(start, PAGE_SIZE << 1);
- end = round_up(end, PAGE_SIZE << 1);
- size = (end - start) >> (PAGE_SHIFT + 1);
- }
+ start = round_down(start, PAGE_SIZE << 1);
+ end = round_up(end, PAGE_SIZE << 1);
+ size = (end - start) >> (PAGE_SHIFT + 1);
if (size <= current_cpu_data.tlbsize/2) {
int oldpid = read_c0_entryhi();
int newpid = cpu_asid(cpu, mm);
@@ -140,10 +133,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
int idx;
write_c0_entryhi(start | newpid);
- if (huge)
- start += HPAGE_SIZE;
- else
- start += (PAGE_SIZE << 1);
+ start += (PAGE_SIZE << 1);
mtc0_tlbw_hazard();
tlb_probe();
tlb_probe_hazard();
diff --git a/arch/mips/netlogic/dts/Makefile b/arch/mips/netlogic/dts/Makefile
index 67ae3fe2..d117d46 100644
--- a/arch/mips/netlogic/dts/Makefile
+++ b/arch/mips/netlogic/dts/Makefile
@@ -1,4 +1 @@
obj-$(CONFIG_DT_XLP_EVP) := xlp_evp.dtb.o
-
-$(obj)/%.dtb: $(obj)/%.dts
- $(call if_changed,dtc)
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 04e35bc..4040416 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -313,10 +313,8 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
}
}
-#ifdef CONFIG_HOTPLUG
EXPORT_SYMBOL(PCIBIOS_MIN_IO);
EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
-#endif
int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine)
diff --git a/arch/openrisc/Makefile b/arch/openrisc/Makefile
index 966886c..4739b83 100644
--- a/arch/openrisc/Makefile
+++ b/arch/openrisc/Makefile
@@ -50,6 +50,6 @@ BUILTIN_DTB := y
else
BUILTIN_DTB := n
endif
-core-$(BUILTIN_DTB) += arch/openrisc/boot/
+core-$(BUILTIN_DTB) += arch/openrisc/boot/dts/
all: vmlinux
diff --git a/arch/openrisc/boot/Makefile b/arch/openrisc/boot/dts/Makefile
index 0995835..b092d30 100644
--- a/arch/openrisc/boot/Makefile
+++ b/arch/openrisc/boot/dts/Makefile
@@ -1,5 +1,3 @@
-
-
ifneq '$(CONFIG_OPENRISC_BUILTIN_DTB)' '""'
BUILTIN_DTB := $(patsubst "%",%,$(CONFIG_OPENRISC_BUILTIN_DTB)).dtb.o
else
@@ -10,6 +8,3 @@ obj-y += $(BUILTIN_DTB)
clean-files := *.dtb.S
#DTC_FLAGS ?= -p 1024
-
-$(obj)/%.dtb: $(src)/dts/%.dts FORCE
- $(call if_changed_dep,dtc)
diff --git a/arch/openrisc/kernel/signal.c b/arch/openrisc/kernel/signal.c
index 3011029..ddedc8a 100644
--- a/arch/openrisc/kernel/signal.c
+++ b/arch/openrisc/kernel/signal.c
@@ -84,7 +84,6 @@ asmlinkage long _sys_rt_sigreturn(struct pt_regs *regs)
{
struct rt_sigframe *frame = (struct rt_sigframe __user *)regs->sp;
sigset_t set;
- stack_t st;
/*
* Since we stacked the signal on a dword boundary,
@@ -104,11 +103,10 @@ asmlinkage long _sys_rt_sigreturn(struct pt_regs *regs)
if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
goto badframe;
- if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st)))
- goto badframe;
/* It is more difficult to avoid calling this function than to
call it and ignore errors. */
- do_sigaltstack(&st, NULL, regs->sp);
+ if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT)
+ goto badframe;
return regs->gpr[11];
diff --git a/arch/parisc/kernel/signal32.c b/arch/parisc/kernel/signal32.c
index fd49aed..5dede04 100644
--- a/arch/parisc/kernel/signal32.c
+++ b/arch/parisc/kernel/signal32.c
@@ -65,7 +65,8 @@ put_sigset32(compat_sigset_t __user *up, sigset_t *set, size_t sz)
{
compat_sigset_t s;
- if (sz != sizeof *set) panic("put_sigset32()");
+ if (sz != sizeof *set)
+ return -EINVAL;
sigset_64to32(&s, set);
return copy_to_user(up, &s, sizeof s);
@@ -77,7 +78,8 @@ get_sigset32(compat_sigset_t __user *up, sigset_t *set, size_t sz)
compat_sigset_t s;
int r;
- if (sz != sizeof *set) panic("put_sigset32()");
+ if (sz != sizeof *set)
+ return -EINVAL;
if ((r = copy_from_user(&s, up, sz)) == 0) {
sigset_32to64(set, &s);
diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c
index 7426e40..f76c108 100644
--- a/arch/parisc/kernel/sys_parisc.c
+++ b/arch/parisc/kernel/sys_parisc.c
@@ -73,6 +73,8 @@ static unsigned long get_shared_area(struct address_space *mapping,
struct vm_area_struct *vma;
int offset = mapping ? get_offset(mapping) : 0;
+ offset = (offset + (pgoff << PAGE_SHIFT)) & 0x3FF000;
+
addr = DCACHE_ALIGN(addr - offset) + offset;
for (vma = find_vma(current->mm, addr); ; vma = vma->vm_next) {
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index 3735abd..cbf5d59 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -60,7 +60,7 @@
ENTRY_SAME(fork_wrapper)
ENTRY_SAME(read)
ENTRY_SAME(write)
- ENTRY_SAME(open) /* 5 */
+ ENTRY_COMP(open) /* 5 */
ENTRY_SAME(close)
ENTRY_SAME(waitpid)
ENTRY_SAME(creat)
diff --git a/arch/powerpc/boot/dts/mpc5200b.dtsi b/arch/powerpc/boot/dts/mpc5200b.dtsi
index 7ab286a..39ed65a 100644
--- a/arch/powerpc/boot/dts/mpc5200b.dtsi
+++ b/arch/powerpc/boot/dts/mpc5200b.dtsi
@@ -231,6 +231,12 @@
interrupts = <2 7 0>;
};
+ sclpc@3c00 {
+ compatible = "fsl,mpc5200-lpbfifo";
+ reg = <0x3c00 0x60>;
+ interrupts = <2 23 0>;
+ };
+
i2c@3d00 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/o2d.dtsi b/arch/powerpc/boot/dts/o2d.dtsi
index 3444eb8..24f6680 100644
--- a/arch/powerpc/boot/dts/o2d.dtsi
+++ b/arch/powerpc/boot/dts/o2d.dtsi
@@ -86,12 +86,6 @@
reg = <0>;
};
};
-
- sclpc@3c00 {
- compatible = "fsl,mpc5200-lpbfifo";
- reg = <0x3c00 0x60>;
- interrupts = <3 23 0>;
- };
};
localbus {
diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
index 9e35499..96512c0 100644
--- a/arch/powerpc/boot/dts/pcm030.dts
+++ b/arch/powerpc/boot/dts/pcm030.dts
@@ -59,7 +59,7 @@
#gpio-cells = <2>;
};
- psc@2000 { /* PSC1 in ac97 mode */
+ audioplatform: psc@2000 { /* PSC1 in ac97 mode */
compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
cell-index = <0>;
};
@@ -134,4 +134,9 @@
localbus {
status = "disabled";
};
+
+ sound {
+ compatible = "phytec,pcm030-audio-fabric";
+ asoc-platform = <&audioplatform>;
+ };
};
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 7f94f76..abc0d08 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1428,8 +1428,6 @@ void __init pcibios_resource_survey(void)
ppc_md.pcibios_fixup();
}
-#ifdef CONFIG_HOTPLUG
-
/* This is used by the PCI hotplug driver to allocate resource
* of newly plugged busses. We can try to consolidate with the
* rest of the code later, for now, keep it as-is as our main
@@ -1488,8 +1486,6 @@ void pcibios_finish_adding_to_bus(struct pci_bus *bus)
}
EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus);
-#endif /* CONFIG_HOTPLUG */
-
int pcibios_enable_device(struct pci_dev *dev, int mask)
{
if (ppc_md.pcibios_enable_device_hook)
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 4ff190f..2cbe676 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -74,8 +74,6 @@ static int __init pcibios_init(void)
subsys_initcall(pcibios_init);
-#ifdef CONFIG_HOTPLUG
-
int pcibios_unmap_io_space(struct pci_bus *bus)
{
struct pci_controller *hose;
@@ -124,8 +122,6 @@ int pcibios_unmap_io_space(struct pci_bus *bus)
}
EXPORT_SYMBOL_GPL(pcibios_unmap_io_space);
-#endif /* CONFIG_HOTPLUG */
-
static int __devinit pcibios_map_phb_io_space(struct pci_controller *hose)
{
struct vm_struct *area;
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
index 8520b58..b89ef65 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
@@ -372,10 +372,11 @@ static int mpc52xx_irqhost_map(struct irq_domain *h, unsigned int virq,
case MPC52xx_IRQ_L1_MAIN: irqchip = &mpc52xx_main_irqchip; break;
case MPC52xx_IRQ_L1_PERP: irqchip = &mpc52xx_periph_irqchip; break;
case MPC52xx_IRQ_L1_SDMA: irqchip = &mpc52xx_sdma_irqchip; break;
- default:
- pr_err("%s: invalid irq: virq=%i, l1=%i, l2=%i\n",
- __func__, virq, l1irq, l2irq);
- return -EINVAL;
+ case MPC52xx_IRQ_L1_CRIT:
+ pr_warn("%s: Critical IRQ #%d is unsupported! Nopping it.\n",
+ __func__, l2irq);
+ irq_set_chip(virq, &no_irq_chip);
+ return 0;
}
irq_set_chip_and_handler(virq, irqchip, handle_level_irq);
diff --git a/arch/powerpc/platforms/powermac/pfunc_core.c b/arch/powerpc/platforms/powermac/pfunc_core.c
index b0c3777..d588e48 100644
--- a/arch/powerpc/platforms/powermac/pfunc_core.c
+++ b/arch/powerpc/platforms/powermac/pfunc_core.c
@@ -686,7 +686,7 @@ static int pmf_add_functions(struct pmf_device *dev, void *driverdata)
int count = 0;
for (pp = dev->node->properties; pp != 0; pp = pp->next) {
- char *name;
+ const char *name;
if (strncmp(pp->name, PP_PREFIX, plen) != 0)
continue;
name = pp->name + plen;
diff --git a/arch/powerpc/platforms/pseries/eeh_pe.c b/arch/powerpc/platforms/pseries/eeh_pe.c
index 797cd18..d16c8de 100644
--- a/arch/powerpc/platforms/pseries/eeh_pe.c
+++ b/arch/powerpc/platforms/pseries/eeh_pe.c
@@ -449,7 +449,7 @@ int eeh_rmv_from_parent_pe(struct eeh_dev *edev, int purge_pe)
if (list_empty(&pe->edevs)) {
cnt = 0;
list_for_each_entry(child, &pe->child_list, child) {
- if (!(pe->type & EEH_PE_INVALID)) {
+ if (!(child->type & EEH_PE_INVALID)) {
cnt++;
break;
}
diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c
index d19f497..e5b0847 100644
--- a/arch/powerpc/platforms/pseries/msi.c
+++ b/arch/powerpc/platforms/pseries/msi.c
@@ -220,7 +220,8 @@ static struct device_node *find_pe_dn(struct pci_dev *dev, int *total)
/* Get the top level device in the PE */
edev = of_node_to_eeh_dev(dn);
- edev = list_first_entry(&edev->pe->edevs, struct eeh_dev, list);
+ if (edev->pe)
+ edev = list_first_entry(&edev->pe->edevs, struct eeh_dev, list);
dn = eeh_dev_to_of_node(edev);
if (!dn)
return NULL;
diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c
index 45d00e5..4d806b4 100644
--- a/arch/powerpc/platforms/pseries/processor_idle.c
+++ b/arch/powerpc/platforms/pseries/processor_idle.c
@@ -36,7 +36,7 @@ static struct cpuidle_state *cpuidle_state_table;
static inline void idle_loop_prolog(unsigned long *in_purr, ktime_t *kt_before)
{
- *kt_before = ktime_get_real();
+ *kt_before = ktime_get();
*in_purr = mfspr(SPRN_PURR);
/*
* Indicate to the HV that we are idle. Now would be
@@ -50,7 +50,7 @@ static inline s64 idle_loop_epilog(unsigned long in_purr, ktime_t kt_before)
get_lppaca()->wait_state_cycles += mfspr(SPRN_PURR) - in_purr;
get_lppaca()->idle = 0;
- return ktime_to_us(ktime_sub(ktime_get_real(), kt_before));
+ return ktime_to_us(ktime_sub(ktime_get(), kt_before));
}
static int snooze_loop(struct cpuidle_device *dev,
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index 39f71fb..2f46681 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -281,12 +281,11 @@ static struct property *new_property(const char *name, const int length,
if (!new)
return NULL;
- if (!(new->name = kmalloc(strlen(name) + 1, GFP_KERNEL)))
+ if (!(new->name = kstrdup(name, GFP_KERNEL)))
goto cleanup;
if (!(new->value = kmalloc(length + 1, GFP_KERNEL)))
goto cleanup;
- strcpy(new->name, name);
memcpy(new->value, value, length);
*(((char *)new->value) + length) = 0;
new->length = length;
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index ffb93ae..01b62a6 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -136,7 +136,7 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
u32 pcicsrbar = 0, pcicsrbar_sz;
u32 piwar = PIWAR_EN | PIWAR_PF | PIWAR_TGI_LOCAL |
PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP;
- char *name = hose->dn->full_name;
+ const char *name = hose->dn->full_name;
const u64 *reg;
int len;
diff --git a/arch/powerpc/sysdev/scom.c b/arch/powerpc/sysdev/scom.c
index 702256a..9193e12 100644
--- a/arch/powerpc/sysdev/scom.c
+++ b/arch/powerpc/sysdev/scom.c
@@ -157,7 +157,7 @@ static int scom_debug_init_one(struct dentry *root, struct device_node *dn,
ent->map = SCOM_MAP_INVALID;
spin_lock_init(&ent->lock);
snprintf(ent->name, 8, "scom%d", i);
- ent->blob.data = dn->full_name;
+ ent->blob.data = (void*) dn->full_name;
ent->blob.size = strlen(dn->full_name);
dir = debugfs_create_dir(ent->name, root);
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index ad79b84..827e094 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -28,7 +28,7 @@ ENTRY(sys32_open_wrapper)
llgtr %r2,%r2 # const char *
lgfr %r3,%r3 # int
lgfr %r4,%r4 # int
- jg sys_open # branch to system call
+ jg compat_sys_open # branch to system call
ENTRY(sys32_close_wrapper)
llgfr %r2,%r2 # unsigned int
diff --git a/arch/score/kernel/signal.c b/arch/score/kernel/signal.c
index c268bbf..02353bd 100644
--- a/arch/score/kernel/signal.c
+++ b/arch/score/kernel/signal.c
@@ -148,7 +148,6 @@ score_rt_sigreturn(struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
sigset_t set;
- stack_t st;
int sig;
/* Always make any pending restarted system calls return -EINTR */
@@ -168,12 +167,10 @@ score_rt_sigreturn(struct pt_regs *regs)
else if (sig)
force_sig(sig, current);
- if (__copy_from_user(&st, &frame->rs_uc.uc_stack, sizeof(st)))
- goto badframe;
-
/* It is more difficult to avoid calling this function than to
call it and ignore errors. */
- do_sigaltstack((stack_t __user *)&st, NULL, regs->regs[0]);
+ if (do_sigaltstack(&frame->rs_uc.uc_stack, NULL, regs->regs[0]) == -EFAULT)
+ goto badframe;
regs->is_syscall = 0;
__asm__ __volatile__(
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index a7e078f..81e5daf 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -319,7 +319,5 @@ EXPORT_SYMBOL(pci_iounmap);
#endif /* CONFIG_GENERIC_IOMAP */
-#ifdef CONFIG_HOTPLUG
EXPORT_SYMBOL(PCIBIOS_MIN_IO);
EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
-#endif
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index 73a23f4..629db2a 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -382,7 +382,7 @@ static inline int iounmap_fixed(void __iomem *addr) { return -EINVAL; }
#define xlate_dev_kmem_ptr(p) p
#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
-int valid_phys_addr_range(unsigned long addr, size_t size);
+int valid_phys_addr_range(phys_addr_t addr, size_t size);
int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
#endif /* __KERNEL__ */
diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c
index 2385381..d867cd9 100644
--- a/arch/sh/kernel/signal_64.c
+++ b/arch/sh/kernel/signal_64.c
@@ -347,7 +347,6 @@ asmlinkage int sys_rt_sigreturn(unsigned long r2, unsigned long r3,
{
struct rt_sigframe __user *frame = (struct rt_sigframe __user *) (long) REF_REG_SP;
sigset_t set;
- stack_t __user st;
long long ret;
/* Always make any pending restarted system calls return -EINTR */
@@ -365,11 +364,10 @@ asmlinkage int sys_rt_sigreturn(unsigned long r2, unsigned long r3,
goto badframe;
regs->pc -= 4;
- if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st)))
- goto badframe;
/* It is more difficult to avoid calling this function than to
call it and ignore errors. */
- do_sigaltstack(&st, NULL, REF_REG_SP);
+ if (do_sigaltstack(&frame->uc.uc_stack, NULL, REF_REG_SP) == -EFAULT)
+ goto badframe;
return (int) ret;
diff --git a/arch/sh/mm/mmap.c b/arch/sh/mm/mmap.c
index afeb710..80bf494 100644
--- a/arch/sh/mm/mmap.c
+++ b/arch/sh/mm/mmap.c
@@ -238,7 +238,7 @@ bottomup:
* You really shouldn't be using read() or write() on /dev/mem. This
* might go away in the future.
*/
-int valid_phys_addr_range(unsigned long addr, size_t count)
+int valid_phys_addr_range(phys_addr_t addr, size_t count)
{
if (addr < __MEMORY_START)
return 0;
diff --git a/arch/sparc/boot/piggyback.c b/arch/sparc/boot/piggyback.c
index c0a798f..bb7c951 100644
--- a/arch/sparc/boot/piggyback.c
+++ b/arch/sparc/boot/piggyback.c
@@ -81,18 +81,18 @@ static void usage(void)
static int start_line(const char *line)
{
- if (strcmp(line + 8, " T _start\n") == 0)
+ if (strcmp(line + 10, " _start\n") == 0)
return 1;
- else if (strcmp(line + 16, " T _start\n") == 0)
+ else if (strcmp(line + 18, " _start\n") == 0)
return 1;
return 0;
}
static int end_line(const char *line)
{
- if (strcmp(line + 8, " A _end\n") == 0)
+ if (strcmp(line + 10, " _end\n") == 0)
return 1;
- else if (strcmp (line + 16, " A _end\n") == 0)
+ else if (strcmp (line + 18, " _end\n") == 0)
return 1;
return 0;
}
@@ -100,8 +100,8 @@ static int end_line(const char *line)
/*
* Find address for start and end in System.map.
* The file looks like this:
- * f0004000 T _start
- * f0379f79 A _end
+ * f0004000 ... _start
+ * f0379f79 ... _end
* 1234567890123456
* ^coloumn 1
* There is support for 64 bit addresses too.
diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h
index f930031..67c6257 100644
--- a/arch/sparc/include/asm/prom.h
+++ b/arch/sparc/include/asm/prom.h
@@ -63,10 +63,13 @@ extern char *of_console_options;
extern void irq_trans_init(struct device_node *dp);
extern char *build_path_component(struct device_node *dp);
-/* SPARC has a local implementation */
+/* SPARC has local implementations */
extern int of_address_to_resource(struct device_node *dev, int index,
struct resource *r);
#define of_address_to_resource of_address_to_resource
+void __iomem *of_iomap(struct device_node *node, int index);
+#define of_iomap of_iomap
+
#endif /* __KERNEL__ */
#endif /* _SPARC_PROM_H */
diff --git a/arch/sparc/kernel/pci_impl.h b/arch/sparc/kernel/pci_impl.h
index 918a203..5f68853 100644
--- a/arch/sparc/kernel/pci_impl.h
+++ b/arch/sparc/kernel/pci_impl.h
@@ -88,7 +88,7 @@ struct pci_pbm_info {
int chip_revision;
/* Name used for top-level resources. */
- char *name;
+ const char *name;
/* OBP specific information. */
struct platform_device *op;
diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c
index 867de2f..689e1ba 100644
--- a/arch/sparc/kernel/signal_64.c
+++ b/arch/sparc/kernel/signal_64.c
@@ -295,9 +295,7 @@ void do_rt_sigreturn(struct pt_regs *regs)
err |= restore_fpu_state(regs, fpu_save);
err |= __copy_from_user(&set, &sf->mask, sizeof(sigset_t));
- err |= do_sigaltstack(&sf->stack, NULL, (unsigned long)sf);
-
- if (err)
+ if (err || do_sigaltstack(&sf->stack, NULL, (unsigned long)sf) == -EFAULT)
goto segv;
err |= __get_user(rwin_save, &sf->rwin_save);
diff --git a/arch/sparc/kernel/sys32.S b/arch/sparc/kernel/sys32.S
index 44025f4..8475a47 100644
--- a/arch/sparc/kernel/sys32.S
+++ b/arch/sparc/kernel/sys32.S
@@ -47,7 +47,7 @@ STUB: sra REG1, 0, REG1; \
sra REG4, 0, REG4
SIGN1(sys32_exit, sparc_exit, %o0)
-SIGN1(sys32_exit_group, sys_exit_group, %o0)
+SIGN1(sys32_exit_group, sparc_exit_group, %o0)
SIGN1(sys32_wait4, compat_sys_wait4, %o2)
SIGN1(sys32_creat, sys_creat, %o1)
SIGN1(sys32_mknod, sys_mknod, %o1)
diff --git a/arch/sparc/kernel/syscalls.S b/arch/sparc/kernel/syscalls.S
index 7f5f65d..bf23477 100644
--- a/arch/sparc/kernel/syscalls.S
+++ b/arch/sparc/kernel/syscalls.S
@@ -118,10 +118,20 @@ ret_from_syscall:
ba,pt %xcc, ret_sys_call
ldx [%sp + PTREGS_OFF + PT_V9_I0], %o0
+ .globl sparc_exit_group
+ .type sparc_exit_group,#function
+sparc_exit_group:
+ sethi %hi(sys_exit_group), %g7
+ ba,pt %xcc, 1f
+ or %g7, %lo(sys_exit_group), %g7
+ .size sparc_exit_group,.-sparc_exit_group
+
.globl sparc_exit
.type sparc_exit,#function
sparc_exit:
- rdpr %pstate, %g2
+ sethi %hi(sys_exit), %g7
+ or %g7, %lo(sys_exit), %g7
+1: rdpr %pstate, %g2
wrpr %g2, PSTATE_IE, %pstate
rdpr %otherwin, %g1
rdpr %cansave, %g3
@@ -129,7 +139,7 @@ sparc_exit:
wrpr %g3, 0x0, %cansave
wrpr %g0, 0x0, %otherwin
wrpr %g2, 0x0, %pstate
- ba,pt %xcc, sys_exit
+ jmpl %g7, %g0
stb %g0, [%g6 + TI_WSAVED]
.size sparc_exit,.-sparc_exit
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index 1c9af9f..017b74a 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -133,7 +133,7 @@ sys_call_table:
/*170*/ .word sys_lsetxattr, sys_fsetxattr, sys_getxattr, sys_lgetxattr, sys_getdents
.word sys_setsid, sys_fchdir, sys_fgetxattr, sys_listxattr, sys_llistxattr
/*180*/ .word sys_flistxattr, sys_removexattr, sys_lremovexattr, sys_nis_syscall, sys_ni_syscall
- .word sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sys_newuname
+ .word sys_setpgid, sys_fremovexattr, sys_tkill, sparc_exit_group, sys_newuname
/*190*/ .word sys_init_module, sys_sparc64_personality, sys_remap_file_pages, sys_epoll_create, sys_epoll_ctl
.word sys_epoll_wait, sys_ioprio_set, sys_getppid, sys_nis_syscall, sys_sgetmask
/*200*/ .word sys_ssetmask, sys_nis_syscall, sys_newlstat, sys_uselib, sys_nis_syscall
diff --git a/arch/um/kernel/exec.c b/arch/um/kernel/exec.c
index 3a8ece7..0d7103c 100644
--- a/arch/um/kernel/exec.c
+++ b/arch/um/kernel/exec.c
@@ -32,13 +32,14 @@ void flush_thread(void)
"err = %d\n", ret);
force_sig(SIGKILL, current);
}
+ get_safe_registers(current_pt_regs()->regs.gp,
+ current_pt_regs()->regs.fp);
__switch_mm(&current->mm->context.id);
}
void start_thread(struct pt_regs *regs, unsigned long eip, unsigned long esp)
{
- get_safe_registers(regs->regs.gp, regs->regs.fp);
PT_REGS_IP(regs) = eip;
PT_REGS_SP(regs) = esp;
current->ptrace &= ~PT_DTRACE;
diff --git a/arch/unicore32/kernel/pci.c b/arch/unicore32/kernel/pci.c
index b0056f6..7c43592 100644
--- a/arch/unicore32/kernel/pci.c
+++ b/arch/unicore32/kernel/pci.c
@@ -250,9 +250,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n",
bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis");
}
-#ifdef CONFIG_HOTPLUG
EXPORT_SYMBOL(pcibios_fixup_bus);
-#endif
static int __init pci_common_init(void)
{
diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
index c760e07..e87b0ca 100644
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -12,6 +12,8 @@
#include <asm/setup.h>
#include <asm/desc.h>
+#undef memcpy /* Use memcpy from misc.c */
+
#include "eboot.h"
static efi_system_table_t *sys_table;
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index 2a01744..8c132a6 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -476,6 +476,3 @@ die:
setup_corrupt:
.byte 7
.string "No setup signature found...\n"
-
- .data
-dummy: .long 0
diff --git a/arch/x86/include/asm/Kbuild b/arch/x86/include/asm/Kbuild
index 66e5f0e..79fd8a3 100644
--- a/arch/x86/include/asm/Kbuild
+++ b/arch/x86/include/asm/Kbuild
@@ -12,6 +12,7 @@ header-y += mce.h
header-y += msr-index.h
header-y += msr.h
header-y += mtrr.h
+header-y += perf_regs.h
header-y += posix_types_32.h
header-y += posix_types_64.h
header-y += posix_types_x32.h
@@ -19,8 +20,10 @@ header-y += prctl.h
header-y += processor-flags.h
header-y += ptrace-abi.h
header-y += sigcontext32.h
+header-y += svm.h
header-y += ucontext.h
header-y += vm86.h
+header-y += vmx.h
header-y += vsyscall.h
genhdr-y += unistd_32.h
diff --git a/arch/x86/include/asm/device.h b/arch/x86/include/asm/device.h
index 93e1c55..03dd729 100644
--- a/arch/x86/include/asm/device.h
+++ b/arch/x86/include/asm/device.h
@@ -2,9 +2,6 @@
#define _ASM_X86_DEVICE_H
struct dev_archdata {
-#ifdef CONFIG_ACPI
- void *acpi_handle;
-#endif
#ifdef CONFIG_X86_DEV_DMA_OPS
struct dma_map_ops *dma_ops;
#endif
diff --git a/arch/x86/include/asm/fpu-internal.h b/arch/x86/include/asm/fpu-internal.h
index 831dbb9..41ab26e 100644
--- a/arch/x86/include/asm/fpu-internal.h
+++ b/arch/x86/include/asm/fpu-internal.h
@@ -399,14 +399,17 @@ static inline void drop_init_fpu(struct task_struct *tsk)
typedef struct { int preload; } fpu_switch_t;
/*
- * FIXME! We could do a totally lazy restore, but we need to
- * add a per-cpu "this was the task that last touched the FPU
- * on this CPU" variable, and the task needs to have a "I last
- * touched the FPU on this CPU" and check them.
+ * Must be run with preemption disabled: this clears the fpu_owner_task,
+ * on this CPU.
*
- * We don't do that yet, so "fpu_lazy_restore()" always returns
- * false, but some day..
+ * This will disable any lazy FPU state restore of the current FPU state,
+ * but if the current thread owns the FPU, it will still be saved by.
*/
+static inline void __cpu_disable_lazy_restore(unsigned int cpu)
+{
+ per_cpu(fpu_owner_task, cpu) = NULL;
+}
+
static inline int fpu_lazy_restore(struct task_struct *new, unsigned int cpu)
{
return new == this_cpu_read_stable(fpu_owner_task) &&
diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h
index dcfde52..19f16eb 100644
--- a/arch/x86/include/asm/ptrace.h
+++ b/arch/x86/include/asm/ptrace.h
@@ -205,21 +205,14 @@ static inline bool user_64bit_mode(struct pt_regs *regs)
}
#endif
-/*
- * X86_32 CPUs don't save ss and esp if the CPU is already in kernel mode
- * when it traps. The previous stack will be directly underneath the saved
- * registers, and 'sp/ss' won't even have been saved. Thus the '&regs->sp'.
- *
- * This is valid only for kernel mode traps.
- */
-static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
-{
#ifdef CONFIG_X86_32
- return (unsigned long)(&regs->sp);
+extern unsigned long kernel_stack_pointer(struct pt_regs *regs);
#else
+static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
+{
return regs->sp;
-#endif
}
+#endif
#define GET_IP(regs) ((regs)->ip)
#define GET_FP(regs) ((regs)->bp)
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index e651f7a..e48cafc 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -574,6 +574,12 @@ int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
return irq;
}
+EXPORT_SYMBOL_GPL(acpi_register_gsi);
+
+void acpi_unregister_gsi(u32 gsi)
+{
+}
+EXPORT_SYMBOL_GPL(acpi_unregister_gsi);
void __init acpi_set_irq_model_pic(void)
{
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 11676cf..d5e0d71 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -101,6 +101,8 @@ static int __init acpi_sleep_setup(char *str)
#endif
if (strncmp(str, "nonvs", 5) == 0)
acpi_nvs_nosave();
+ if (strncmp(str, "nonvs_s3", 8) == 0)
+ acpi_nvs_nosave_s3();
if (strncmp(str, "old_ordering", 12) == 0)
acpi_old_suspend_ordering();
str = strchr(str, ',');
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index f7e98a2..1b7d165 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -631,6 +631,20 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
}
}
+ /*
+ * The way access filter has a performance penalty on some workloads.
+ * Disable it on the affected CPUs.
+ */
+ if ((c->x86 == 0x15) &&
+ (c->x86_model >= 0x02) && (c->x86_model < 0x20)) {
+ u64 val;
+
+ if (!rdmsrl_safe(0xc0011021, &val) && !(val & 0x1E)) {
+ val |= 0x1E;
+ wrmsrl_safe(0xc0011021, val);
+ }
+ }
+
cpu_detect_cache_sizes(c);
/* Multi core CPU? */
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index 698b6ec..1ac581f 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -6,7 +6,7 @@
*
* Written by Jacob Shin - AMD, Inc.
*
- * Support: borislav.petkov@amd.com
+ * Maintained by: Borislav Petkov <bp@alien8.de>
*
* April 2006
* - added support for AMD Family 0x10 processors
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c
index 5f88abf..4f9a3cb 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c
@@ -285,34 +285,39 @@ void cmci_clear(void)
raw_spin_unlock_irqrestore(&cmci_discover_lock, flags);
}
+static long cmci_rediscover_work_func(void *arg)
+{
+ int banks;
+
+ /* Recheck banks in case CPUs don't all have the same */
+ if (cmci_supported(&banks))
+ cmci_discover(banks);
+
+ return 0;
+}
+
/*
* After a CPU went down cycle through all the others and rediscover
* Must run in process context.
*/
void cmci_rediscover(int dying)
{
- int banks;
- int cpu;
- cpumask_var_t old;
+ int cpu, banks;
if (!cmci_supported(&banks))
return;
- if (!alloc_cpumask_var(&old, GFP_KERNEL))
- return;
- cpumask_copy(old, &current->cpus_allowed);
for_each_online_cpu(cpu) {
if (cpu == dying)
continue;
- if (set_cpus_allowed_ptr(current, cpumask_of(cpu)))
+
+ if (cpu == smp_processor_id()) {
+ cmci_rediscover_work_func(NULL);
continue;
- /* Recheck banks in case CPUs don't all have the same */
- if (cmci_supported(&banks))
- cmci_discover(banks);
- }
+ }
- set_cpus_allowed_ptr(current, old);
- free_cpumask_var(old);
+ work_on_cpu(cpu, cmci_rediscover_work_func, NULL);
+ }
}
/*
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index b51b2c7..1328fe4 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -995,8 +995,8 @@ END(interrupt)
*/
.p2align CONFIG_X86_L1_CACHE_SHIFT
common_interrupt:
- ASM_CLAC
XCPT_FRAME
+ ASM_CLAC
addq $-0x80,(%rsp) /* Adjust vector to [-256,-1] range */
interrupt do_IRQ
/* 0(%rsp): old_rsp-ARGOFFSET */
@@ -1135,8 +1135,8 @@ END(common_interrupt)
*/
.macro apicinterrupt num sym do_sym
ENTRY(\sym)
- ASM_CLAC
INTR_FRAME
+ ASM_CLAC
pushq_cfi $~(\num)
.Lcommon_\sym:
interrupt \do_sym
@@ -1190,8 +1190,8 @@ apicinterrupt IRQ_WORK_VECTOR \
*/
.macro zeroentry sym do_sym
ENTRY(\sym)
- ASM_CLAC
INTR_FRAME
+ ASM_CLAC
PARAVIRT_ADJUST_EXCEPTION_FRAME
pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */
subq $ORIG_RAX-R15, %rsp
@@ -1208,8 +1208,8 @@ END(\sym)
.macro paranoidzeroentry sym do_sym
ENTRY(\sym)
- ASM_CLAC
INTR_FRAME
+ ASM_CLAC
PARAVIRT_ADJUST_EXCEPTION_FRAME
pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */
subq $ORIG_RAX-R15, %rsp
@@ -1227,8 +1227,8 @@ END(\sym)
#define INIT_TSS_IST(x) PER_CPU_VAR(init_tss) + (TSS_ist + ((x) - 1) * 8)
.macro paranoidzeroentry_ist sym do_sym ist
ENTRY(\sym)
- ASM_CLAC
INTR_FRAME
+ ASM_CLAC
PARAVIRT_ADJUST_EXCEPTION_FRAME
pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */
subq $ORIG_RAX-R15, %rsp
@@ -1247,8 +1247,8 @@ END(\sym)
.macro errorentry sym do_sym
ENTRY(\sym)
- ASM_CLAC
XCPT_FRAME
+ ASM_CLAC
PARAVIRT_ADJUST_EXCEPTION_FRAME
subq $ORIG_RAX-R15, %rsp
CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15
@@ -1266,8 +1266,8 @@ END(\sym)
/* error code is on the stack already */
.macro paranoiderrorentry sym do_sym
ENTRY(\sym)
- ASM_CLAC
XCPT_FRAME
+ ASM_CLAC
PARAVIRT_ADJUST_EXCEPTION_FRAME
subq $ORIG_RAX-R15, %rsp
CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 957a47a..4dac2f6 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -292,8 +292,8 @@ default_entry:
* be using the global pages.
*
* NOTE! If we are on a 486 we may have no cr4 at all!
- * Specifically, cr4 exists if and only if CPUID exists,
- * which in turn exists if and only if EFLAGS.ID exists.
+ * Specifically, cr4 exists if and only if CPUID exists
+ * and has flags other than the FPU flag set.
*/
movl $X86_EFLAGS_ID,%ecx
pushl %ecx
@@ -308,6 +308,11 @@ default_entry:
testl %ecx,%eax
jz 6f # No ID flag = no CPUID = no CR4
+ movl $1,%eax
+ cpuid
+ andl $~1,%edx # Ignore CPUID.FPU
+ jz 6f # No flags or only CPUID.FPU = no CR4
+
movl pa(mmu_cr4_features),%eax
movl %eax,%cr4
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
index 7720ff5..efdec7c 100644
--- a/arch/x86/kernel/microcode_amd.c
+++ b/arch/x86/kernel/microcode_amd.c
@@ -8,8 +8,8 @@
* Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
*
* Maintainers:
- * Andreas Herrmann <andreas.herrmann3@amd.com>
- * Borislav Petkov <borislav.petkov@amd.com>
+ * Andreas Herrmann <herrmann.der.user@googlemail.com>
+ * Borislav Petkov <bp@alien8.de>
*
* This driver allows to upgrade microcode on F10h AMD
* CPUs and later.
@@ -190,6 +190,7 @@ static unsigned int verify_patch_size(int cpu, u32 patch_size,
#define F1XH_MPB_MAX_SIZE 2048
#define F14H_MPB_MAX_SIZE 1824
#define F15H_MPB_MAX_SIZE 4096
+#define F16H_MPB_MAX_SIZE 3458
switch (c->x86) {
case 0x14:
@@ -198,6 +199,9 @@ static unsigned int verify_patch_size(int cpu, u32 patch_size,
case 0x15:
max_size = F15H_MPB_MAX_SIZE;
break;
+ case 0x16:
+ max_size = F16H_MPB_MAX_SIZE;
+ break;
default:
max_size = F1XH_MPB_MAX_SIZE;
break;
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index b00b33a..974b67e 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -22,6 +22,7 @@
#include <linux/perf_event.h>
#include <linux/hw_breakpoint.h>
#include <linux/rcupdate.h>
+#include <linux/module.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
@@ -166,6 +167,35 @@ static inline bool invalid_selector(u16 value)
#define FLAG_MASK FLAG_MASK_32
+/*
+ * X86_32 CPUs don't save ss and esp if the CPU is already in kernel mode
+ * when it traps. The previous stack will be directly underneath the saved
+ * registers, and 'sp/ss' won't even have been saved. Thus the '&regs->sp'.
+ *
+ * Now, if the stack is empty, '&regs->sp' is out of range. In this
+ * case we try to take the previous stack. To always return a non-null
+ * stack pointer we fall back to regs as stack if no previous stack
+ * exists.
+ *
+ * This is valid only for kernel mode traps.
+ */
+unsigned long kernel_stack_pointer(struct pt_regs *regs)
+{
+ unsigned long context = (unsigned long)regs & ~(THREAD_SIZE - 1);
+ unsigned long sp = (unsigned long)&regs->sp;
+ struct thread_info *tinfo;
+
+ if (context == (sp & ~(THREAD_SIZE - 1)))
+ return sp;
+
+ tinfo = (struct thread_info *)context;
+ if (tinfo->previous_esp)
+ return tinfo->previous_esp;
+
+ return (unsigned long)regs;
+}
+EXPORT_SYMBOL_GPL(kernel_stack_pointer);
+
static unsigned long *pt_regs_access(struct pt_regs *regs, unsigned long regno)
{
BUILD_BUG_ON(offsetof(struct pt_regs, bx) != 0);
@@ -1511,6 +1541,13 @@ void syscall_trace_leave(struct pt_regs *regs)
{
bool step;
+ /*
+ * We may come here right after calling schedule_user()
+ * or do_notify_resume(), in which case we can be in RCU
+ * user mode.
+ */
+ rcu_user_exit();
+
audit_syscall_exit(regs);
if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index c80a33b..f3e2ec8 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -68,6 +68,8 @@
#include <asm/mwait.h>
#include <asm/apic.h>
#include <asm/io_apic.h>
+#include <asm/i387.h>
+#include <asm/fpu-internal.h>
#include <asm/setup.h>
#include <asm/uv/uv.h>
#include <linux/mc146818rtc.h>
@@ -818,6 +820,9 @@ int __cpuinit native_cpu_up(unsigned int cpu, struct task_struct *tidle)
per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
+ /* the FPU context is blank, nobody can own it */
+ __cpu_disable_lazy_restore(cpu);
+
err = do_boot_cpu(apicid, cpu, tidle);
if (err) {
pr_debug("do_boot_cpu failed %d\n", err);
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 39171cb..bba39bf 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -426,8 +426,7 @@ static void invalidate_registers(struct x86_emulate_ctxt *ctxt)
_ASM_EXTABLE(1b, 3b) \
: "=m" ((ctxt)->eflags), "=&r" (_tmp), \
"+a" (*rax), "+d" (*rdx), "+qm"(_ex) \
- : "i" (EFLAGS_MASK), "m" ((ctxt)->src.val), \
- "a" (*rax), "d" (*rdx)); \
+ : "i" (EFLAGS_MASK), "m" ((ctxt)->src.val)); \
} while (0)
/* instruction has only one source operand, destination is implicit (e.g. mul, div, imul, idiv) */
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 0777f04..60f926c 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -197,7 +197,7 @@ void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
}
if (end == TLB_FLUSH_ALL || tlb_flushall_shift == -1
- || vmflag == VM_HUGETLB) {
+ || vmflag & VM_HUGETLB) {
local_flush_tlb();
goto flush_all;
}
diff --git a/arch/x86/pci/ce4100.c b/arch/x86/pci/ce4100.c
index 41bd2a2..b914e20 100644
--- a/arch/x86/pci/ce4100.c
+++ b/arch/x86/pci/ce4100.c
@@ -115,6 +115,16 @@ static void sata_revid_read(struct sim_dev_reg *reg, u32 *value)
reg_read(reg, value);
}
+static void reg_noirq_read(struct sim_dev_reg *reg, u32 *value)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&pci_config_lock, flags);
+ /* force interrupt pin value to 0 */
+ *value = reg->sim_reg.value & 0xfff00ff;
+ raw_spin_unlock_irqrestore(&pci_config_lock, flags);
+}
+
static struct sim_dev_reg bus1_fixups[] = {
DEFINE_REG(2, 0, 0x10, (16*MB), reg_init, reg_read, reg_write)
DEFINE_REG(2, 0, 0x14, (256), reg_init, reg_read, reg_write)
@@ -144,6 +154,7 @@ static struct sim_dev_reg bus1_fixups[] = {
DEFINE_REG(11, 5, 0x10, (64*KB), reg_init, reg_read, reg_write)
DEFINE_REG(11, 6, 0x10, (256), reg_init, reg_read, reg_write)
DEFINE_REG(11, 7, 0x10, (64*KB), reg_init, reg_read, reg_write)
+ DEFINE_REG(11, 7, 0x3c, 256, reg_init, reg_noirq_read, reg_write)
DEFINE_REG(12, 0, 0x10, (128*KB), reg_init, reg_read, reg_write)
DEFINE_REG(12, 0, 0x14, (256), reg_init, reg_read, reg_write)
DEFINE_REG(12, 1, 0x10, (1024), reg_init, reg_read, reg_write)
@@ -161,8 +172,10 @@ static struct sim_dev_reg bus1_fixups[] = {
DEFINE_REG(16, 0, 0x10, (64*KB), reg_init, reg_read, reg_write)
DEFINE_REG(16, 0, 0x14, (64*MB), reg_init, reg_read, reg_write)
DEFINE_REG(16, 0, 0x18, (64*MB), reg_init, reg_read, reg_write)
+ DEFINE_REG(16, 0, 0x3c, 256, reg_init, reg_noirq_read, reg_write)
DEFINE_REG(17, 0, 0x10, (128*KB), reg_init, reg_read, reg_write)
DEFINE_REG(18, 0, 0x10, (1*KB), reg_init, reg_read, reg_write)
+ DEFINE_REG(18, 0, 0x3c, 256, reg_init, reg_noirq_read, reg_write)
};
static void __init init_sim_regs(void)
diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c
index 0dcc30e..f8ab494 100644
--- a/arch/x86/platform/ce4100/ce4100.c
+++ b/arch/x86/platform/ce4100/ce4100.c
@@ -21,12 +21,25 @@
#include <asm/i8259.h>
#include <asm/io.h>
#include <asm/io_apic.h>
+#include <asm/emergency-restart.h>
static int ce4100_i8042_detect(void)
{
return 0;
}
+/*
+ * The CE4100 platform has an internal 8051 Microcontroller which is
+ * responsible for signaling to the external Power Management Unit the
+ * intention to reset, reboot or power off the system. This 8051 device has
+ * its command register mapped at I/O port 0xcf9 and the value 0x4 is used
+ * to power off the system.
+ */
+static void ce4100_power_off(void)
+{
+ outb(0x4, 0xcf9);
+}
+
#ifdef CONFIG_SERIAL_8250
static unsigned int mem_serial_in(struct uart_port *p, int offset)
@@ -142,8 +155,19 @@ void __init x86_ce4100_early_setup(void)
x86_init.mpparse.find_smp_config = x86_init_noop;
x86_init.pci.init = ce4100_pci_init;
+ /*
+ * By default, the reboot method is ACPI which is supported by the
+ * CE4100 bootloader CEFDK using FADT.ResetReg Address and ResetValue
+ * the bootloader will however issue a system power off instead of
+ * reboot. By using BOOT_KBD we ensure proper system reboot as
+ * expected.
+ */
+ reboot_type = BOOT_KBD;
+
#ifdef CONFIG_X86_IO_APIC
x86_init.pci.init_irq = sdv_pci_init;
x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc_nocheck;
#endif
+
+ pm_power_off = ce4100_power_off;
}
OpenPOWER on IntegriCloud