diff options
Diffstat (limited to 'arch')
52 files changed, 1015 insertions, 383 deletions
diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi index 881bc39..4ad5160 100644 --- a/arch/arm/boot/dts/db8500.dtsi +++ b/arch/arm/boot/dts/db8500.dtsi @@ -58,6 +58,8 @@ "st,nomadik-gpio"; reg = <0x8012e000 0x80>; interrupts = <0 119 0x4>; + interrupt-controller; + #interrupt-cells = <2>; supports-sleepmode; gpio-controller; #gpio-cells = <2>; @@ -69,6 +71,8 @@ "st,nomadik-gpio"; reg = <0x8012e080 0x80>; interrupts = <0 120 0x4>; + interrupt-controller; + #interrupt-cells = <2>; supports-sleepmode; gpio-controller; #gpio-cells = <2>; @@ -80,6 +84,8 @@ "st,nomadik-gpio"; reg = <0x8000e000 0x80>; interrupts = <0 121 0x4>; + interrupt-controller; + #interrupt-cells = <2>; supports-sleepmode; gpio-controller; #gpio-cells = <2>; @@ -91,6 +97,8 @@ "st,nomadik-gpio"; reg = <0x8000e080 0x80>; interrupts = <0 122 0x4>; + interrupt-controller; + #interrupt-cells = <2>; supports-sleepmode; gpio-controller; #gpio-cells = <2>; @@ -102,6 +110,8 @@ "st,nomadik-gpio"; reg = <0x8000e100 0x80>; interrupts = <0 123 0x4>; + interrupt-controller; + #interrupt-cells = <2>; supports-sleepmode; gpio-controller; #gpio-cells = <2>; @@ -113,6 +123,8 @@ "st,nomadik-gpio"; reg = <0x8000e180 0x80>; interrupts = <0 124 0x4>; + interrupt-controller; + #interrupt-cells = <2>; supports-sleepmode; gpio-controller; #gpio-cells = <2>; @@ -124,6 +136,8 @@ "st,nomadik-gpio"; reg = <0x8011e000 0x80>; interrupts = <0 125 0x4>; + interrupt-controller; + #interrupt-cells = <2>; supports-sleepmode; gpio-controller; #gpio-cells = <2>; @@ -135,6 +149,8 @@ "st,nomadik-gpio"; reg = <0x8011e080 0x80>; interrupts = <0 126 0x4>; + interrupt-controller; + #interrupt-cells = <2>; supports-sleepmode; gpio-controller; #gpio-cells = <2>; @@ -146,12 +162,18 @@ "st,nomadik-gpio"; reg = <0xa03fe000 0x80>; interrupts = <0 127 0x4>; + interrupt-controller; + #interrupt-cells = <2>; supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <8>; }; + pinctrl { + compatible = "stericsson,nmk_pinctrl"; + }; + usb@a03e0000 { compatible = "stericsson,db8500-musb", "mentor,musb"; @@ -169,20 +191,195 @@ prcmu@80157000 { compatible = "stericsson,db8500-prcmu"; reg = <0x80157000 0x1000>; - interrupts = <46 47>; + interrupts = <0 47 0x4>; #address-cells = <1>; #size-cells = <1>; ranges; - prcmu-timer-4@80157450 { + prcmu-timer-4@80157450 { compatible = "stericsson,db8500-prcmu-timer-4"; reg = <0x80157450 0xC>; }; + db8500-prcmu-regulators { + compatible = "stericsson,db8500-prcmu-regulator"; + + // DB8500_REGULATOR_VAPE + db8500_vape_reg: db8500_vape { + regulator-name = "db8500-vape"; + regulator-always-on; + }; + + // DB8500_REGULATOR_VARM + db8500_varm_reg: db8500_varm { + regulator-name = "db8500-varm"; + }; + + // DB8500_REGULATOR_VMODEM + db8500_vmodem_reg: db8500_vmodem { + regulator-name = "db8500-vmodem"; + }; + + // DB8500_REGULATOR_VPLL + db8500_vpll_reg: db8500_vpll { + regulator-name = "db8500-vpll"; + }; + + // DB8500_REGULATOR_VSMPS1 + db8500_vsmps1_reg: db8500_vsmps1 { + regulator-name = "db8500-vsmps1"; + }; + + // DB8500_REGULATOR_VSMPS2 + db8500_vsmps2_reg: db8500_vsmps2 { + regulator-name = "db8500-vsmps2"; + }; + + // DB8500_REGULATOR_VSMPS3 + db8500_vsmps3_reg: db8500_vsmps3 { + regulator-name = "db8500-vsmps3"; + }; + + // DB8500_REGULATOR_VRF1 + db8500_vrf1_reg: db8500_vrf1 { + regulator-name = "db8500-vrf1"; + }; + + // DB8500_REGULATOR_SWITCH_SVAMMDSP + db8500_sva_mmdsp_reg: db8500_sva_mmdsp { + regulator-name = "db8500-sva-mmdsp"; + }; + + // DB8500_REGULATOR_SWITCH_SVAMMDSPRET + db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { + regulator-name = "db8500-sva-mmdsp-ret"; + }; + + // DB8500_REGULATOR_SWITCH_SVAPIPE + db8500_sva_pipe_reg: db8500_sva_pipe { + regulator-name = "db8500_sva_pipe"; + }; + + // DB8500_REGULATOR_SWITCH_SIAMMDSP + db8500_sia_mmdsp_reg: db8500_sia_mmdsp { + regulator-name = "db8500_sia_mmdsp"; + }; + + // DB8500_REGULATOR_SWITCH_SIAMMDSPRET + db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { + regulator-name = "db8500-sia-mmdsp-ret"; + }; + + // DB8500_REGULATOR_SWITCH_SIAPIPE + db8500_sia_pipe_reg: db8500_sia_pipe { + regulator-name = "db8500-sia-pipe"; + }; + + // DB8500_REGULATOR_SWITCH_SGA + db8500_sga_reg: db8500_sga { + regulator-name = "db8500-sga"; + vin-supply = <&db8500_vape_reg>; + }; + + // DB8500_REGULATOR_SWITCH_B2R2_MCDE + db8500_b2r2_mcde_reg: db8500_b2r2_mcde { + regulator-name = "db8500-b2r2-mcde"; + vin-supply = <&db8500_vape_reg>; + }; + + // DB8500_REGULATOR_SWITCH_ESRAM12 + db8500_esram12_reg: db8500_esram12 { + regulator-name = "db8500-esram12"; + }; + + // DB8500_REGULATOR_SWITCH_ESRAM12RET + db8500_esram12_ret_reg: db8500_esram12_ret { + regulator-name = "db8500-esram12-ret"; + }; + + // DB8500_REGULATOR_SWITCH_ESRAM34 + db8500_esram34_reg: db8500_esram34 { + regulator-name = "db8500-esram34"; + }; + + // DB8500_REGULATOR_SWITCH_ESRAM34RET + db8500_esram34_ret_reg: db8500_esram34_ret { + regulator-name = "db8500-esram34-ret"; + }; + }; + ab8500@5 { compatible = "stericsson,ab8500"; reg = <5>; /* mailbox 5 is i2c */ interrupts = <0 40 0x4>; + + ab8500-regulators { + compatible = "stericsson,ab8500-regulator"; + + // supplies to the display/camera + ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { + regulator-name = "V-DISPLAY"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2900000>; + regulator-boot-on; + /* BUG: If turned off MMC will be affected. */ + regulator-always-on; + }; + + // supplies to the on-board eMMC + ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { + regulator-name = "V-eMMC1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <3300000>; + }; + + // supply for VAUX3; SDcard slots + ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { + regulator-name = "V-MMC-SD"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <3300000>; + }; + + // supply for v-intcore12; VINTCORE12 LDO + ab8500_ldo_initcore_reg: ab8500_ldo_initcore { + regulator-name = "V-INTCORE"; + }; + + // supply for tvout; gpadc; TVOUT LDO + ab8500_ldo_tvout_reg: ab8500_ldo_tvout { + regulator-name = "V-TVOUT"; + }; + + // supply for ab8500-usb; USB LDO + ab8500_ldo_usb_reg: ab8500_ldo_usb { + regulator-name = "dummy"; + }; + + // supply for ab8500-vaudio; VAUDIO LDO + ab8500_ldo_audio_reg: ab8500_ldo_audio { + regulator-name = "V-AUD"; + }; + + // supply for v-anamic1 VAMic1-LDO + ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { + regulator-name = "V-AMIC1"; + }; + + // supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1 + ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { + regulator-name = "V-AMIC2"; + }; + + // supply for v-dmic; VDMIC LDO + ab8500_ldo_dmic_reg: ab8500_ldo_dmic { + regulator-name = "V-DMIC"; + }; + + // supply for U8500 CSI/DSI; VANA LDO + ab8500_ldo_ana_reg: ab8500_ldo_ana { + regulator-name = "V-CSI/DSI"; + }; + }; }; }; @@ -235,7 +432,8 @@ status = "disabled"; // Add one of these for each child device - cs-gpios = <&gpio0 31 &gpio4 14 &gpio4 16 &gpio6 22 &gpio7 0>; + cs-gpios = <&gpio0 31 0x4 &gpio4 14 0x4 &gpio4 16 0x4 + &gpio6 22 0x4 &gpio7 0 0x4>; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 2b1a166..386c769 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -213,5 +213,14 @@ status = "disabled"; }; }; + nand@d8000000 { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "fsl,imx27-nand"; + reg = <0xd8000000 0x1000>; + interrupts = <29>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index d99dc04..ec3c339 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -20,6 +20,16 @@ reg = <0x00000000 0x20000000>; }; + en_3v3_reg: en_3v3 { + compatible = "regulator-fixed"; + regulator-name = "en-3v3-fixed-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio0 26 0x4>; // 26 + startup-delay-us = <5000>; + enable-active-high; + }; + gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; @@ -30,35 +40,35 @@ wakeup = <1>; linux,code = <2>; label = "userpb"; - gpios = <&gpio1 0 0>; + gpios = <&gpio1 0 0x4>; }; button@2 { debounce_interval = <50>; wakeup = <1>; linux,code = <3>; label = "extkb1"; - gpios = <&gpio4 23 0>; + gpios = <&gpio4 23 0x4>; }; button@3 { debounce_interval = <50>; wakeup = <1>; linux,code = <4>; label = "extkb2"; - gpios = <&gpio4 24 0>; + gpios = <&gpio4 24 0x4>; }; button@4 { debounce_interval = <50>; wakeup = <1>; linux,code = <5>; label = "extkb3"; - gpios = <&gpio5 1 0>; + gpios = <&gpio5 1 0x4>; }; button@5 { debounce_interval = <50>; wakeup = <1>; linux,code = <6>; label = "extkb4"; - gpios = <&gpio5 2 0>; + gpios = <&gpio5 2 0x4>; }; }; @@ -66,12 +76,11 @@ compatible = "gpio-leds"; used-led { label = "user_led"; - gpios = <&gpio4 14>; + gpios = <&gpio4 14 0x4>; }; }; soc-u9500 { - external-bus@50000000 { status = "okay"; @@ -80,6 +89,9 @@ reg = <0 0x10000>; interrupts = <12 0x1>; interrupt-parent = <&gpio4>; + vdd33a-supply = <&en_3v3_reg>; + vddvario-supply = <&db8500_vape_reg>; + reg-shift = <1>; reg-io-width = <2>; @@ -91,11 +103,13 @@ sdi@80126000 { status = "enabled"; - cd-gpios = <&gpio6 26>; + vmmc-supply = <&ab8500_ldo_aux3_reg>; + cd-gpios = <&gpio6 26 0x4>; // 218 }; sdi@80114000 { status = "enabled"; + vmmc-supply = <&ab8500_ldo_aux2_reg>; }; uart@80120000 { @@ -114,7 +128,7 @@ tc3589x@42 { //compatible = "tc3589x"; reg = <0x42>; - interrupts = <25>; + gpios = <&gpio6 25 0x4>; interrupt-parent = <&gpio6>; }; tps61052@33 { diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 7e84f45..2d4f661 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -75,6 +75,7 @@ CONFIG_AB5500_CORE=y CONFIG_AB8500_CORE=y CONFIG_REGULATOR=y CONFIG_REGULATOR_AB8500=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y # CONFIG_HID_SUPPORT is not set CONFIG_USB_GADGET=y CONFIG_AB8500_USB=y diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index eb28237..01abd35 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -82,8 +82,6 @@ static int snappercl15_nand_dev_ready(struct mtd_info *mtd) return !!(__raw_readw(NAND_CTRL_ADDR(chip)) & SNAPPERCL15_NAND_RDY); } -static const char *snappercl15_nand_part_probes[] = {"cmdlinepart", NULL}; - static struct mtd_partition snappercl15_nand_parts[] = { { .name = "Kernel", @@ -100,10 +98,8 @@ static struct mtd_partition snappercl15_nand_parts[] = { static struct platform_nand_data snappercl15_nand_data = { .chip = { .nr_chips = 1, - .part_probe_types = snappercl15_nand_part_probes, .partitions = snappercl15_nand_parts, .nr_partitions = ARRAY_SIZE(snappercl15_nand_parts), - .options = NAND_NO_AUTOINCR, .chip_delay = 25, }, .ctrl = { diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index d4ef339..75cab2d 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -105,8 +105,6 @@ static int ts72xx_nand_device_ready(struct mtd_info *mtd) return !!(__raw_readb(addr) & 0x20); } -static const char *ts72xx_nand_part_probes[] = { "cmdlinepart", NULL }; - #define TS72XX_BOOTROM_PART_SIZE (SZ_16K) #define TS72XX_REDBOOT_PART_SIZE (SZ_2M + SZ_1M) @@ -134,7 +132,6 @@ static struct platform_nand_data ts72xx_nand_data = { .nr_chips = 1, .chip_offset = 0, .chip_delay = 15, - .part_probe_types = ts72xx_nand_part_probes, .partitions = ts72xx_nand_parts, .nr_partitions = ARRAY_SIZE(ts72xx_nand_parts), }, diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index 972983e..656f8fc 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -237,25 +237,29 @@ static struct exynos_drm_fimd_pdata drm_fimd_pdata = { #else /* Frame Buffer */ static struct s3c_fb_pd_win nuri_fb_win0 = { - .win_mode = { - .left_margin = 64, - .right_margin = 16, - .upper_margin = 64, - .lower_margin = 1, - .hsync_len = 48, - .vsync_len = 3, - .xres = 1024, - .yres = 600, - .refresh = 60, - }, .max_bpp = 24, .default_bpp = 16, + .xres = 1024, + .yres = 600, .virtual_x = 1024, .virtual_y = 2 * 600, }; +static struct fb_videomode nuri_lcd_timing = { + .left_margin = 64, + .right_margin = 16, + .upper_margin = 64, + .lower_margin = 1, + .hsync_len = 48, + .vsync_len = 3, + .xres = 1024, + .yres = 600, + .refresh = 60, +}; + static struct s3c_fb_platdata nuri_fb_pdata __initdata = { .win[0] = &nuri_fb_win0, + .vtiming = &nuri_lcd_timing, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB | VIDCON0_CLKSEL_LCD, .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index a7f7fd5..f5572be 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -604,24 +604,28 @@ static struct exynos_drm_fimd_pdata drm_fimd_pdata = { }; #else static struct s3c_fb_pd_win origen_fb_win0 = { - .win_mode = { - .left_margin = 64, - .right_margin = 16, - .upper_margin = 64, - .lower_margin = 16, - .hsync_len = 48, - .vsync_len = 3, - .xres = 1024, - .yres = 600, - }, + .xres = 1024, + .yres = 600, .max_bpp = 32, .default_bpp = 24, .virtual_x = 1024, .virtual_y = 2 * 600, }; +static struct fb_videomode origen_lcd_timing = { + .left_margin = 64, + .right_margin = 16, + .upper_margin = 64, + .lower_margin = 16, + .hsync_len = 48, + .vsync_len = 3, + .xres = 1024, + .yres = 600, +}; + static struct s3c_fb_platdata origen_lcd_pdata __initdata = { .win[0] = &origen_fb_win0, + .vtiming = &origen_lcd_timing, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC | VIDCON1_INV_VCLK, diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 70df1a0..262e9e4 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -178,22 +178,26 @@ static struct exynos_drm_fimd_pdata drm_fimd_pdata = { }; #else static struct s3c_fb_pd_win smdkv310_fb_win0 = { - .win_mode = { - .left_margin = 13, - .right_margin = 8, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, - }, - .max_bpp = 32, - .default_bpp = 24, + .max_bpp = 32, + .default_bpp = 24, + .xres = 800, + .yres = 480, +}; + +static struct fb_videomode smdkv310_lcd_timing = { + .left_margin = 13, + .right_margin = 8, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, }; static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = { .win[0] = &smdkv310_fb_win0, + .vtiming = &smdkv310_lcd_timing, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 083b44d..cd92fa8 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -843,25 +843,29 @@ static struct exynos_drm_fimd_pdata drm_fimd_pdata = { #else /* Frame Buffer */ static struct s3c_fb_pd_win universal_fb_win0 = { - .win_mode = { - .left_margin = 16, - .right_margin = 16, - .upper_margin = 2, - .lower_margin = 28, - .hsync_len = 2, - .vsync_len = 1, - .xres = 480, - .yres = 800, - .refresh = 55, - }, .max_bpp = 32, .default_bpp = 16, + .xres = 480, + .yres = 800, .virtual_x = 480, .virtual_y = 2 * 800, }; +static struct fb_videomode universal_lcd_timing = { + .left_margin = 16, + .right_margin = 16, + .upper_margin = 2, + .lower_margin = 28, + .hsync_len = 2, + .vsync_len = 1, + .xres = 480, + .yres = 800, + .refresh = 55, +}; + static struct s3c_fb_platdata universal_lcd_pdata __initdata = { .win[0] = &universal_fb_win0, + .vtiming = &universal_lcd_timing, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB | VIDCON0_CLKSEL_LCD, .vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index ed38d03..eee0cc8 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -29,6 +29,7 @@ static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI2_BASE_ADDR, "imx27-cspi.1", NULL), OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI3_BASE_ADDR, "imx27-cspi.2", NULL), OF_DEV_AUXDATA("fsl,imx27-wdt", MX27_WDOG_BASE_ADDR, "imx2-wdt.0", NULL), + OF_DEV_AUXDATA("fsl,imx27-nand", MX27_NFC_BASE_ADDR, "mxc_nand.0", NULL), { /* sentinel */ } }; diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index 3d742ae..108a9d3 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -60,8 +60,6 @@ static struct platform_device ixdp425_flash = { #if defined(CONFIG_MTD_NAND_PLATFORM) || \ defined(CONFIG_MTD_NAND_PLATFORM_MODULE) -const char *part_probes[] = { "cmdlinepart", NULL }; - static struct mtd_partition ixdp425_partitions[] = { { .name = "ixp400 NAND FS 0", @@ -100,8 +98,6 @@ static struct platform_nand_data ixdp425_flash_nand_data = { .chip = { .nr_chips = 1, .chip_delay = 30, - .options = NAND_NO_AUTOINCR, - .part_probe_types = part_probes, .partitions = ixdp425_partitions, .nr_partitions = ARRAY_SIZE(ixdp425_partitions), }, diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index 58cacaf..2e8d3e1 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -111,7 +111,7 @@ static struct nomadik_nand_platform_data nhk8815_nand_data = { .parts = nhk8815_partitions, .nparts = ARRAY_SIZE(nhk8815_partitions), .options = NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING \ - | NAND_NO_READRDY | NAND_NO_AUTOINCR, + | NAND_NO_READRDY, .init = nhk8815_nand_init, }; diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index c7364fd..6872f3f 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -192,14 +192,11 @@ static int nand_dev_ready(struct mtd_info *mtd) return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN); } -static const char *part_probes[] = { "cmdlinepart", NULL }; - static struct platform_nand_data nand_data = { .chip = { .nr_chips = 1, .chip_offset = 0, .options = NAND_SAMSUNG_LP_OPTIONS, - .part_probe_types = part_probes, }, .ctrl = { .cmd_ctrl = omap1_nand_cmd_ctl, diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 7e50368..a28e989 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -186,8 +186,6 @@ static int h2_nand_dev_ready(struct mtd_info *mtd) return gpio_get_value(H2_NAND_RB_GPIO_PIN); } -static const char *h2_part_probes[] = { "cmdlinepart", NULL }; - static struct platform_nand_data h2_nand_platdata = { .chip = { .nr_chips = 1, @@ -195,7 +193,6 @@ static struct platform_nand_data h2_nand_platdata = { .nr_partitions = ARRAY_SIZE(h2_nand_partitions), .partitions = h2_nand_partitions, .options = NAND_SAMSUNG_LP_OPTIONS, - .part_probe_types = h2_part_probes, }, .ctrl = { .cmd_ctrl = omap1_nand_cmd_ctl, diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 9fb03f1..108a864 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -188,8 +188,6 @@ static int nand_dev_ready(struct mtd_info *mtd) return gpio_get_value(H3_NAND_RB_GPIO_PIN); } -static const char *part_probes[] = { "cmdlinepart", NULL }; - static struct platform_nand_data nand_platdata = { .chip = { .nr_chips = 1, @@ -197,7 +195,6 @@ static struct platform_nand_data nand_platdata = { .nr_partitions = ARRAY_SIZE(nand_partitions), .partitions = nand_partitions, .options = NAND_SAMSUNG_LP_OPTIONS, - .part_probe_types = part_probes, }, .ctrl = { .cmd_ctrl = omap1_nand_cmd_ctl, diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index f2cb243..703d55e 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -150,14 +150,11 @@ static int nand_dev_ready(struct mtd_info *mtd) return gpio_get_value(P2_NAND_RB_GPIO_PIN); } -static const char *part_probes[] = { "cmdlinepart", NULL }; - static struct platform_nand_data nand_data = { .chip = { .nr_chips = 1, .chip_offset = 0, .options = NAND_SAMSUNG_LP_OPTIONS, - .part_probe_types = part_probes, }, .ctrl = { .cmd_ctrl = omap1_nand_cmd_ctl, diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index db5a88a..54d49dd 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -180,16 +180,133 @@ static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask) omap4_dsi_mux_pads(dsi_id, 0); } +static int omap_dss_set_min_bus_tput(struct device *dev, unsigned long tput) +{ + return omap_pm_set_min_bus_tput(dev, OCP_INITIATOR_AGENT, tput); +} + +static struct platform_device *create_dss_pdev(const char *pdev_name, + int pdev_id, const char *oh_name, void *pdata, int pdata_len, + struct platform_device *parent) +{ + struct platform_device *pdev; + struct omap_device *od; + struct omap_hwmod *ohs[1]; + struct omap_hwmod *oh; + int r; + + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("Could not look up %s\n", oh_name); + r = -ENODEV; + goto err; + } + + pdev = platform_device_alloc(pdev_name, pdev_id); + if (!pdev) { + pr_err("Could not create pdev for %s\n", pdev_name); + r = -ENOMEM; + goto err; + } + + if (parent != NULL) + pdev->dev.parent = &parent->dev; + + if (pdev->id != -1) + dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id); + else + dev_set_name(&pdev->dev, "%s", pdev->name); + + ohs[0] = oh; + od = omap_device_alloc(pdev, ohs, 1, NULL, 0); + if (!od) { + pr_err("Could not alloc omap_device for %s\n", pdev_name); + r = -ENOMEM; + goto err; + } + + r = platform_device_add_data(pdev, pdata, pdata_len); + if (r) { + pr_err("Could not set pdata for %s\n", pdev_name); + goto err; + } + + r = omap_device_register(pdev); + if (r) { + pr_err("Could not register omap_device for %s\n", pdev_name); + goto err; + } + + return pdev; + +err: + return ERR_PTR(r); +} + +static struct platform_device *create_simple_dss_pdev(const char *pdev_name, + int pdev_id, void *pdata, int pdata_len, + struct platform_device *parent) +{ + struct platform_device *pdev; + int r; + + pdev = platform_device_alloc(pdev_name, pdev_id); + if (!pdev) { + pr_err("Could not create pdev for %s\n", pdev_name); + r = -ENOMEM; + goto err; + } + + if (parent != NULL) + pdev->dev.parent = &parent->dev; + + if (pdev->id != -1) + dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id); + else + dev_set_name(&pdev->dev, "%s", pdev->name); + + r = platform_device_add_data(pdev, pdata, pdata_len); + if (r) { + pr_err("Could not set pdata for %s\n", pdev_name); + goto err; + } + + r = omap_device_register(pdev); + if (r) { + pr_err("Could not register omap_device for %s\n", pdev_name); + goto err; + } + + return pdev; + +err: + return ERR_PTR(r); +} + int __init omap_display_init(struct omap_dss_board_info *board_data) { int r = 0; - struct omap_hwmod *oh; struct platform_device *pdev; int i, oh_count; - struct omap_display_platform_data pdata; const struct omap_dss_hwmod_data *curr_dss_hwmod; + struct platform_device *dss_pdev; + + /* create omapdss device */ + + board_data->dsi_enable_pads = omap_dsi_enable_pads; + board_data->dsi_disable_pads = omap_dsi_disable_pads; + board_data->get_context_loss_count = omap_pm_get_dev_context_loss_count; + board_data->set_min_bus_tput = omap_dss_set_min_bus_tput; + + omap_display_device.dev.platform_data = board_data; + + r = platform_device_register(&omap_display_device); + if (r < 0) { + pr_err("Unable to register omapdss device\n"); + return r; + } - memset(&pdata, 0, sizeof(pdata)); + /* create devices for dss hwmods */ if (cpu_is_omap24xx()) { curr_dss_hwmod = omap2_dss_hwmod_data; @@ -202,39 +319,58 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) oh_count = ARRAY_SIZE(omap4_dss_hwmod_data); } - if (board_data->dsi_enable_pads == NULL) - board_data->dsi_enable_pads = omap_dsi_enable_pads; - if (board_data->dsi_disable_pads == NULL) - board_data->dsi_disable_pads = omap_dsi_disable_pads; - - pdata.board_data = board_data; - pdata.board_data->get_context_loss_count = - omap_pm_get_dev_context_loss_count; - - for (i = 0; i < oh_count; i++) { - oh = omap_hwmod_lookup(curr_dss_hwmod[i].oh_name); - if (!oh) { - pr_err("Could not look up %s\n", - curr_dss_hwmod[i].oh_name); - return -ENODEV; + /* + * First create the pdev for dss_core, which is used as a parent device + * by the other dss pdevs. Note: dss_core has to be the first item in + * the hwmod list. + */ + dss_pdev = create_dss_pdev(curr_dss_hwmod[0].dev_name, + curr_dss_hwmod[0].id, + curr_dss_hwmod[0].oh_name, + board_data, sizeof(*board_data), + NULL); + + if (IS_ERR(dss_pdev)) { + pr_err("Could not build omap_device for %s\n", + curr_dss_hwmod[0].oh_name); + + return PTR_ERR(dss_pdev); + } + + for (i = 1; i < oh_count; i++) { + pdev = create_dss_pdev(curr_dss_hwmod[i].dev_name, + curr_dss_hwmod[i].id, + curr_dss_hwmod[i].oh_name, + board_data, sizeof(*board_data), + dss_pdev); + + if (IS_ERR(pdev)) { + pr_err("Could not build omap_device for %s\n", + curr_dss_hwmod[i].oh_name); + + return PTR_ERR(pdev); } + } - pdev = omap_device_build(curr_dss_hwmod[i].dev_name, - curr_dss_hwmod[i].id, oh, &pdata, - sizeof(struct omap_display_platform_data), - NULL, 0, 0); + /* Create devices for DPI and SDI */ - if (WARN((IS_ERR(pdev)), "Could not build omap_device for %s\n", - curr_dss_hwmod[i].oh_name)) - return -ENODEV; + pdev = create_simple_dss_pdev("omapdss_dpi", -1, + board_data, sizeof(*board_data), dss_pdev); + if (IS_ERR(pdev)) { + pr_err("Could not build platform_device for omapdss_dpi\n"); + return PTR_ERR(pdev); } - omap_display_device.dev.platform_data = board_data; - r = platform_device_register(&omap_display_device); - if (r < 0) - printk(KERN_ERR "Unable to register OMAP-Display device\n"); + if (cpu_is_omap34xx()) { + pdev = create_simple_dss_pdev("omapdss_sdi", -1, + board_data, sizeof(*board_data), dss_pdev); + if (IS_ERR(pdev)) { + pr_err("Could not build platform_device for omapdss_sdi\n"); + return PTR_ERR(pdev); + } + } - return r; + return 0; } static void dispc_disable_outputs(void) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 46b09da..2286410 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -49,6 +49,7 @@ #define GPMC_ECC_CONTROL 0x1f8 #define GPMC_ECC_SIZE_CONFIG 0x1fc #define GPMC_ECC1_RESULT 0x200 +#define GPMC_ECC_BCH_RESULT_0 0x240 /* not available on OMAP2 */ /* GPMC ECC control settings */ #define GPMC_ECC_CTRL_ECCCLEAR 0x100 @@ -935,3 +936,186 @@ int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code) return 0; } EXPORT_SYMBOL_GPL(gpmc_calculate_ecc); + +#ifdef CONFIG_ARCH_OMAP3 + +/** + * gpmc_init_hwecc_bch - initialize hardware BCH ecc functionality + * @cs: chip select number + * @nsectors: how many 512-byte sectors to process + * @nerrors: how many errors to correct per sector (4 or 8) + * + * This function must be executed before any call to gpmc_enable_hwecc_bch. + */ +int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors) +{ + /* check if ecc module is in use */ + if (gpmc_ecc_used != -EINVAL) + return -EINVAL; + + /* support only OMAP3 class */ + if (!cpu_is_omap34xx()) { + printk(KERN_ERR "BCH ecc is not supported on this CPU\n"); + return -EINVAL; + } + + /* + * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1. + * Other chips may be added if confirmed to work. + */ + if ((nerrors == 4) && + (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) { + printk(KERN_ERR "BCH 4-bit mode is not supported on this CPU\n"); + return -EINVAL; + } + + /* sanity check */ + if (nsectors > 8) { + printk(KERN_ERR "BCH cannot process %d sectors (max is 8)\n", + nsectors); + return -EINVAL; + } + + return 0; +} +EXPORT_SYMBOL_GPL(gpmc_init_hwecc_bch); + +/** + * gpmc_enable_hwecc_bch - enable hardware BCH ecc functionality + * @cs: chip select number + * @mode: read/write mode + * @dev_width: device bus width(1 for x16, 0 for x8) + * @nsectors: how many 512-byte sectors to process + * @nerrors: how many errors to correct per sector (4 or 8) + */ +int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors, + int nerrors) +{ + unsigned int val; + + /* check if ecc module is in use */ + if (gpmc_ecc_used != -EINVAL) + return -EINVAL; + + gpmc_ecc_used = cs; + + /* clear ecc and enable bits */ + gpmc_write_reg(GPMC_ECC_CONTROL, 0x1); + + /* + * When using BCH, sector size is hardcoded to 512 bytes. + * Here we are using wrapping mode 6 both for reading and writing, with: + * size0 = 0 (no additional protected byte in spare area) + * size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area) + */ + gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, (32 << 22) | (0 << 12)); + + /* BCH configuration */ + val = ((1 << 16) | /* enable BCH */ + (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */ + (0x06 << 8) | /* wrap mode = 6 */ + (dev_width << 7) | /* bus width */ + (((nsectors-1) & 0x7) << 4) | /* number of sectors */ + (cs << 1) | /* ECC CS */ + (0x1)); /* enable ECC */ + + gpmc_write_reg(GPMC_ECC_CONFIG, val); + gpmc_write_reg(GPMC_ECC_CONTROL, 0x101); + return 0; +} +EXPORT_SYMBOL_GPL(gpmc_enable_hwecc_bch); + +/** + * gpmc_calculate_ecc_bch4 - Generate 7 ecc bytes per sector of 512 data bytes + * @cs: chip select number + * @dat: The pointer to data on which ecc is computed + * @ecc: The ecc output buffer + */ +int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc) +{ + int i; + unsigned long nsectors, reg, val1, val2; + + if (gpmc_ecc_used != cs) + return -EINVAL; + + nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1; + + for (i = 0; i < nsectors; i++) { + + reg = GPMC_ECC_BCH_RESULT_0 + 16*i; + + /* Read hw-computed remainder */ + val1 = gpmc_read_reg(reg + 0); + val2 = gpmc_read_reg(reg + 4); + + /* + * Add constant polynomial to remainder, in order to get an ecc + * sequence of 0xFFs for a buffer filled with 0xFFs; and + * left-justify the resulting polynomial. + */ + *ecc++ = 0x28 ^ ((val2 >> 12) & 0xFF); + *ecc++ = 0x13 ^ ((val2 >> 4) & 0xFF); + *ecc++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF)); + *ecc++ = 0x39 ^ ((val1 >> 20) & 0xFF); + *ecc++ = 0x96 ^ ((val1 >> 12) & 0xFF); + *ecc++ = 0xac ^ ((val1 >> 4) & 0xFF); + *ecc++ = 0x7f ^ ((val1 & 0xF) << 4); + } + + gpmc_ecc_used = -EINVAL; + return 0; +} +EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch4); + +/** + * gpmc_calculate_ecc_bch8 - Generate 13 ecc bytes per block of 512 data bytes + * @cs: chip select number + * @dat: The pointer to data on which ecc is computed + * @ecc: The ecc output buffer + */ +int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc) +{ + int i; + unsigned long nsectors, reg, val1, val2, val3, val4; + + if (gpmc_ecc_used != cs) + return -EINVAL; + + nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1; + + for (i = 0; i < nsectors; i++) { + + reg = GPMC_ECC_BCH_RESULT_0 + 16*i; + + /* Read hw-computed remainder */ + val1 = gpmc_read_reg(reg + 0); + val2 = gpmc_read_reg(reg + 4); + val3 = gpmc_read_reg(reg + 8); + val4 = gpmc_read_reg(reg + 12); + + /* + * Add constant polynomial to remainder, in order to get an ecc + * sequence of 0xFFs for a buffer filled with 0xFFs. + */ + *ecc++ = 0xef ^ (val4 & 0xFF); + *ecc++ = 0x51 ^ ((val3 >> 24) & 0xFF); + *ecc++ = 0x2e ^ ((val3 >> 16) & 0xFF); + *ecc++ = 0x09 ^ ((val3 >> 8) & 0xFF); + *ecc++ = 0xed ^ (val3 & 0xFF); + *ecc++ = 0x93 ^ ((val2 >> 24) & 0xFF); + *ecc++ = 0x9a ^ ((val2 >> 16) & 0xFF); + *ecc++ = 0xc2 ^ ((val2 >> 8) & 0xFF); + *ecc++ = 0x97 ^ (val2 & 0xFF); + *ecc++ = 0x79 ^ ((val1 >> 24) & 0xFF); + *ecc++ = 0xe5 ^ ((val1 >> 16) & 0xFF); + *ecc++ = 0x24 ^ ((val1 >> 8) & 0xFF); + *ecc++ = 0xb5 ^ (val1 & 0xFF); + } + + gpmc_ecc_used = -EINVAL; + return 0; +} +EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch8); + +#endif /* CONFIG_ARCH_OMAP3 */ diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index a74f3cf..b420327 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -251,8 +251,6 @@ static void ts78xx_ts_nand_read_buf(struct mtd_info *mtd, readsb(io_base, buf, len); } -const char *ts_nand_part_probes[] = { "cmdlinepart", NULL }; - static struct mtd_partition ts78xx_ts_nand_parts[] = { { .name = "mbr", @@ -277,7 +275,6 @@ static struct mtd_partition ts78xx_ts_nand_parts[] = { static struct platform_nand_data ts78xx_ts_nand_data = { .chip = { .nr_chips = 1, - .part_probe_types = ts_nand_part_probes, .partitions = ts78xx_ts_nand_parts, .nr_partitions = ARRAY_SIZE(ts78xx_ts_nand_parts), .chip_delay = 15, diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index 56e8ceb..9244493 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -679,8 +679,6 @@ static struct mtd_partition balloon3_partition_info[] = { }, }; -static const char *balloon3_part_probes[] = { "cmdlinepart", NULL }; - struct platform_nand_data balloon3_nand_pdata = { .chip = { .nr_chips = 4, @@ -688,7 +686,6 @@ struct platform_nand_data balloon3_nand_pdata = { .nr_partitions = ARRAY_SIZE(balloon3_partition_info), .partitions = balloon3_partition_info, .chip_delay = 50, - .part_probe_types = balloon3_part_probes, }, .ctrl = { .hwcontrol = 0, diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index a3a4a38..97f82ad 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -338,8 +338,6 @@ static struct mtd_partition em_x270_partition_info[] = { }, }; -static const char *em_x270_part_probes[] = { "cmdlinepart", NULL }; - struct platform_nand_data em_x270_nand_platdata = { .chip = { .nr_chips = 1, @@ -347,7 +345,6 @@ struct platform_nand_data em_x270_nand_platdata = { .nr_partitions = ARRAY_SIZE(em_x270_partition_info), .partitions = em_x270_partition_info, .chip_delay = 20, - .part_probe_types = em_x270_part_probes, }, .ctrl = { .hwcontrol = 0, diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 9507605..0da35dc 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -268,8 +268,6 @@ static struct mtd_partition palmtx_partition_info[] = { }, }; -static const char *palmtx_part_probes[] = { "cmdlinepart", NULL }; - struct platform_nand_data palmtx_nand_platdata = { .chip = { .nr_chips = 1, @@ -277,7 +275,6 @@ struct platform_nand_data palmtx_nand_platdata = { .nr_partitions = ARRAY_SIZE(palmtx_partition_info), .partitions = palmtx_partition_info, .chip_delay = 20, - .part_probe_types = palmtx_part_probes, }, .ctrl = { .cmd_ctrl = palmtx_nand_cmd_ctl, diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c index 30a44f8..c3100a0 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2416.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c @@ -148,23 +148,25 @@ static struct s3c24xx_hsudc_platdata smdk2416_hsudc_platdata = { static struct s3c_fb_pd_win smdk2416_fb_win[] = { [0] = { - /* think this is the same as the smdk6410 */ - .win_mode = { - .pixclock = 41094, - .left_margin = 8, - .right_margin = 13, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, - }, .default_bpp = 16, .max_bpp = 32, + .xres = 800, + .yres = 480, }, }; +static struct fb_videomode smdk2416_lcd_timing = { + .pixclock = 41094, + .left_margin = 8, + .right_margin = 13, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, +}; + static void s3c2416_fb_gpio_setup_24bpp(void) { unsigned int gpio; @@ -187,6 +189,7 @@ static void s3c2416_fb_gpio_setup_24bpp(void) static struct s3c_fb_platdata smdk2416_fb_platdata = { .win[0] = &smdk2416_fb_win[0], + .vtiming = &smdk2416_lcd_timing, .setup_gpio = s3c2416_fb_gpio_setup_24bpp, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c index 314df05..ffa29dd 100644 --- a/arch/arm/mach-s3c64xx/mach-anw6410.c +++ b/arch/arm/mach-s3c64xx/mach-anw6410.c @@ -134,24 +134,27 @@ static struct platform_device anw6410_lcd_powerdev = { }; static struct s3c_fb_pd_win anw6410_fb_win0 = { - /* this is to ensure we use win0 */ - .win_mode = { - .left_margin = 8, - .right_margin = 13, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, - }, .max_bpp = 32, .default_bpp = 16, + .xres = 800, + .yres = 480, +}; + +static struct fb_videomode anw6410_lcd_timing = { + .left_margin = 8, + .right_margin = 13, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, }; /* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */ static struct s3c_fb_platdata anw6410_lcd_pdata __initdata = { .setup_gpio = s3c64xx_fb_gpio_setup_24bpp, + .vtiming = &anw6410_lcd_timing, .win[0] = &anw6410_fb_win0, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 6b20a71..d0c352d 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -151,26 +151,29 @@ static struct platform_device crag6410_lcd_powerdev = { /* 640x480 URT */ static struct s3c_fb_pd_win crag6410_fb_win0 = { - /* this is to ensure we use win0 */ - .win_mode = { - .left_margin = 150, - .right_margin = 80, - .upper_margin = 40, - .lower_margin = 5, - .hsync_len = 40, - .vsync_len = 5, - .xres = 640, - .yres = 480, - }, .max_bpp = 32, .default_bpp = 16, + .xres = 640, + .yres = 480, .virtual_y = 480 * 2, .virtual_x = 640, }; +static struct fb_videomode crag6410_lcd_timing = { + .left_margin = 150, + .right_margin = 80, + .upper_margin = 40, + .lower_margin = 5, + .hsync_len = 40, + .vsync_len = 5, + .xres = 640, + .yres = 480, +}; + /* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */ static struct s3c_fb_platdata crag6410_lcd_pdata __initdata = { .setup_gpio = s3c64xx_fb_gpio_setup_24bpp, + .vtiming = &crag6410_lcd_timing, .win[0] = &crag6410_fb_win0, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c index 1bf6b9d..6890881 100644 --- a/arch/arm/mach-s3c64xx/mach-hmt.c +++ b/arch/arm/mach-s3c64xx/mach-hmt.c @@ -129,23 +129,27 @@ static struct platform_device hmt_backlight_device = { }; static struct s3c_fb_pd_win hmt_fb_win0 = { - .win_mode = { - .left_margin = 8, - .right_margin = 13, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, - }, .max_bpp = 32, .default_bpp = 16, + .xres = 800, + .yres = 480, +}; + +static struct fb_videomode hmt_lcd_timing = { + .left_margin = 8, + .right_margin = 13, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, }; /* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */ static struct s3c_fb_platdata hmt_lcd_pdata __initdata = { .setup_gpio = s3c64xx_fb_gpio_setup_24bpp, + .vtiming = &hmt_lcd_timing, .win[0] = &hmt_fb_win0, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index f8ea61ea..5539a255 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -140,41 +140,59 @@ static struct s3c2410_platform_nand mini6410_nand_info = { .sets = mini6410_nand_sets, }; -static struct s3c_fb_pd_win mini6410_fb_win[] = { +static struct s3c_fb_pd_win mini6410_lcd_type0_fb_win = { + .max_bpp = 32, + .default_bpp = 16, + .xres = 480, + .yres = 272, +}; + +static struct fb_videomode mini6410_lcd_type0_timing = { + /* 4.3" 480x272 */ + .left_margin = 3, + .right_margin = 2, + .upper_margin = 1, + .lower_margin = 1, + .hsync_len = 40, + .vsync_len = 1, + .xres = 480, + .yres = 272, +}; + +static struct s3c_fb_pd_win mini6410_lcd_type1_fb_win = { + .max_bpp = 32, + .default_bpp = 16, + .xres = 800, + .yres = 480, +}; + +static struct fb_videomode mini6410_lcd_type1_timing = { + /* 7.0" 800x480 */ + .left_margin = 8, + .right_margin = 13, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, +}; + +static struct s3c_fb_platdata mini6410_lcd_pdata[] __initdata = { { - .win_mode = { /* 4.3" 480x272 */ - .left_margin = 3, - .right_margin = 2, - .upper_margin = 1, - .lower_margin = 1, - .hsync_len = 40, - .vsync_len = 1, - .xres = 480, - .yres = 272, - }, - .max_bpp = 32, - .default_bpp = 16, + .setup_gpio = s3c64xx_fb_gpio_setup_24bpp, + .vtiming = &mini6410_lcd_type0_timing, + .win[0] = &mini6410_lcd_type0_fb_win, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, }, { - .win_mode = { /* 7.0" 800x480 */ - .left_margin = 8, - .right_margin = 13, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, - }, - .max_bpp = 32, - .default_bpp = 16, + .setup_gpio = s3c64xx_fb_gpio_setup_24bpp, + .vtiming = &mini6410_lcd_type1_timing, + .win[0] = &mini6410_lcd_type1_fb_win, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, }, -}; - -static struct s3c_fb_platdata mini6410_lcd_pdata __initdata = { - .setup_gpio = s3c64xx_fb_gpio_setup_24bpp, - .win[0] = &mini6410_fb_win[0], - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + { }, }; static void mini6410_lcd_power_set(struct plat_lcd_data *pd, @@ -272,7 +290,7 @@ static void mini6410_parse_features( "screen type already set\n", f); } else { int li = f - '0'; - if (li >= ARRAY_SIZE(mini6410_fb_win)) + if (li >= ARRAY_SIZE(mini6410_lcd_pdata)) printk(KERN_INFO "MINI6410: '%c' out " "of range LCD mode\n", f); else { @@ -296,14 +314,12 @@ static void __init mini6410_machine_init(void) /* Parse the feature string */ mini6410_parse_features(&features, mini6410_features_str); - mini6410_lcd_pdata.win[0] = &mini6410_fb_win[features.lcd_index]; - printk(KERN_INFO "MINI6410: selected LCD display is %dx%d\n", - mini6410_lcd_pdata.win[0]->win_mode.xres, - mini6410_lcd_pdata.win[0]->win_mode.yres); + mini6410_lcd_pdata[features.lcd_index].win[0]->xres, + mini6410_lcd_pdata[features.lcd_index].win[0]->yres); s3c_nand_set_platdata(&mini6410_nand_info); - s3c_fb_set_platdata(&mini6410_lcd_pdata); + s3c_fb_set_platdata(&mini6410_lcd_pdata[features.lcd_index]); s3c24xx_ts_set_platdata(NULL); /* configure nCS1 width to 16 bits */ diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index b92d8e1..326b216 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c @@ -106,41 +106,57 @@ static struct platform_device real6410_device_eth = { }, }; -static struct s3c_fb_pd_win real6410_fb_win[] = { +static struct s3c_fb_pd_win real6410_lcd_type0_fb_win = { + .max_bpp = 32, + .default_bpp = 16, + .xres = 480, + .yres = 272, +}; + +static struct fb_videomode real6410_lcd_type0_timing = { + /* 4.3" 480x272 */ + .left_margin = 3, + .right_margin = 2, + .upper_margin = 1, + .lower_margin = 1, + .hsync_len = 40, + .vsync_len = 1, +}; + +static struct s3c_fb_pd_win real6410_lcd_type1_fb_win = { + .max_bpp = 32, + .default_bpp = 16, + .xres = 800, + .yres = 480, +}; + +static struct fb_videomode real6410_lcd_type1_timing = { + /* 7.0" 800x480 */ + .left_margin = 8, + .right_margin = 13, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, +}; + +static struct s3c_fb_platdata real6410_lcd_pdata[] __initdata = { { - .win_mode = { /* 4.3" 480x272 */ - .left_margin = 3, - .right_margin = 2, - .upper_margin = 1, - .lower_margin = 1, - .hsync_len = 40, - .vsync_len = 1, - .xres = 480, - .yres = 272, - }, - .max_bpp = 32, - .default_bpp = 16, + .setup_gpio = s3c64xx_fb_gpio_setup_24bpp, + .vtiming = &real6410_lcd_type0_timing, + .win[0] = &real6410_lcd_type0_fb_win, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, }, { - .win_mode = { /* 7.0" 800x480 */ - .left_margin = 8, - .right_margin = 13, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, - }, - .max_bpp = 32, - .default_bpp = 16, + .setup_gpio = s3c64xx_fb_gpio_setup_24bpp, + .vtiming = &real6410_lcd_type1_timing, + .win[0] = &real6410_lcd_type1_fb_win, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, }, -}; - -static struct s3c_fb_platdata real6410_lcd_pdata __initdata = { - .setup_gpio = s3c64xx_fb_gpio_setup_24bpp, - .win[0] = &real6410_fb_win[0], - .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, - .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + { }, }; static struct mtd_partition real6410_nand_part[] = { @@ -253,7 +269,7 @@ static void real6410_parse_features( "screen type already set\n", f); } else { int li = f - '0'; - if (li >= ARRAY_SIZE(real6410_fb_win)) + if (li >= ARRAY_SIZE(real6410_lcd_pdata)) printk(KERN_INFO "REAL6410: '%c' out " "of range LCD mode\n", f); else { @@ -277,13 +293,11 @@ static void __init real6410_machine_init(void) /* Parse the feature string */ real6410_parse_features(&features, real6410_features_str); - real6410_lcd_pdata.win[0] = &real6410_fb_win[features.lcd_index]; - printk(KERN_INFO "REAL6410: selected LCD display is %dx%d\n", - real6410_lcd_pdata.win[0]->win_mode.xres, - real6410_lcd_pdata.win[0]->win_mode.yres); + real6410_lcd_pdata[features.lcd_index].win[0]->xres, + real6410_lcd_pdata[features.lcd_index].win[0]->yres); - s3c_fb_set_platdata(&real6410_lcd_pdata); + s3c_fb_set_platdata(&real6410_lcd_pdata[features.lcd_index]); s3c_nand_set_platdata(&real6410_nand_info); s3c24xx_ts_set_platdata(NULL); diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c index c5021d0..d6266d8 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq5.c +++ b/arch/arm/mach-s3c64xx/mach-smartq5.c @@ -108,23 +108,27 @@ static struct platform_device smartq5_buttons_device = { }; static struct s3c_fb_pd_win smartq5_fb_win0 = { - .win_mode = { - .left_margin = 216, - .right_margin = 40, - .upper_margin = 35, - .lower_margin = 10, - .hsync_len = 1, - .vsync_len = 1, - .xres = 800, - .yres = 480, - .refresh = 80, - }, .max_bpp = 32, .default_bpp = 16, + .xres = 800, + .yres = 480, +}; + +static struct fb_videomode smartq5_lcd_timing = { + .left_margin = 216, + .right_margin = 40, + .upper_margin = 35, + .lower_margin = 10, + .hsync_len = 1, + .vsync_len = 1, + .xres = 800, + .yres = 480, + .refresh = 80, }; static struct s3c_fb_platdata smartq5_lcd_pdata __initdata = { .setup_gpio = s3c64xx_fb_gpio_setup_24bpp, + .vtiming = &smartq5_lcd_timing, .win[0] = &smartq5_fb_win0, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC | diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c index aa9072a..0957d2a 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq7.c +++ b/arch/arm/mach-s3c64xx/mach-smartq7.c @@ -124,23 +124,27 @@ static struct platform_device smartq7_buttons_device = { }; static struct s3c_fb_pd_win smartq7_fb_win0 = { - .win_mode = { - .left_margin = 3, - .right_margin = 5, - .upper_margin = 1, - .lower_margin = 20, - .hsync_len = 10, - .vsync_len = 3, - .xres = 800, - .yres = 480, - .refresh = 80, - }, .max_bpp = 32, .default_bpp = 16, + .xres = 800, + .yres = 480, +}; + +static struct fb_videomode smartq7_lcd_timing = { + .left_margin = 3, + .right_margin = 5, + .upper_margin = 1, + .lower_margin = 20, + .hsync_len = 10, + .vsync_len = 3, + .xres = 800, + .yres = 480, + .refresh = 80, }; static struct s3c_fb_platdata smartq7_lcd_pdata __initdata = { .setup_gpio = s3c64xx_fb_gpio_setup_24bpp, + .vtiming = &smartq7_lcd_timing, .win[0] = &smartq7_fb_win0, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC | diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index d44319b..df3103d 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -146,26 +146,29 @@ static struct platform_device smdk6410_lcd_powerdev = { }; static struct s3c_fb_pd_win smdk6410_fb_win0 = { - /* this is to ensure we use win0 */ - .win_mode = { - .left_margin = 8, - .right_margin = 13, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, - }, .max_bpp = 32, .default_bpp = 16, + .xres = 800, + .yres = 480, .virtual_y = 480 * 2, .virtual_x = 800, }; +static struct fb_videomode smdk6410_lcd_timing = { + .left_margin = 8, + .right_margin = 13, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, +}; + /* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */ static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = { .setup_gpio = s3c64xx_fb_gpio_setup_24bpp, + .vtiming = &smdk6410_lcd_timing, .win[0] = &smdk6410_fb_win0, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c index a40e325..92fefad 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6440.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c @@ -103,22 +103,26 @@ static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = { /* Frame Buffer */ static struct s3c_fb_pd_win smdk6440_fb_win0 = { - .win_mode = { - .left_margin = 8, - .right_margin = 13, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, - }, .max_bpp = 32, .default_bpp = 24, + .xres = 800, + .yres = 480, +}; + +static struct fb_videomode smdk6440_lcd_timing = { + .left_margin = 8, + .right_margin = 13, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, }; static struct s3c_fb_platdata smdk6440_lcd_pdata __initdata = { .win[0] = &smdk6440_fb_win0, + .vtiming = &smdk6440_lcd_timing, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, .setup_gpio = s5p64x0_fb_gpio_setup_24bpp, diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c index efb69e2..e2335ec 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6450.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c @@ -121,22 +121,26 @@ static struct s3c2410_uartcfg smdk6450_uartcfgs[] __initdata = { /* Frame Buffer */ static struct s3c_fb_pd_win smdk6450_fb_win0 = { - .win_mode = { - .left_margin = 8, - .right_margin = 13, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, - }, .max_bpp = 32, .default_bpp = 24, + .xres = 800, + .yres = 480, +}; + +static struct fb_videomode smdk6450_lcd_timing = { + .left_margin = 8, + .right_margin = 13, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, }; static struct s3c_fb_platdata smdk6450_lcd_pdata __initdata = { .win[0] = &smdk6450_fb_win0, + .vtiming = &smdk6450_lcd_timing, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, .setup_gpio = s5p64x0_fb_gpio_setup_24bpp, diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c index 674d229..0c3ae38 100644 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -136,24 +136,27 @@ static struct platform_device smdkc100_lcd_powerdev = { /* Frame Buffer */ static struct s3c_fb_pd_win smdkc100_fb_win0 = { - /* this is to ensure we use win0 */ - .win_mode = { - .left_margin = 8, - .right_margin = 13, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, - .refresh = 80, - }, .max_bpp = 32, .default_bpp = 16, + .xres = 800, + .yres = 480, +}; + +static struct fb_videomode smdkc100_lcd_timing = { + .left_margin = 8, + .right_margin = 13, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, + .refresh = 80, }; static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = { .win[0] = &smdkc100_fb_win0, + .vtiming = &smdkc100_lcd_timing, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, .setup_gpio = s5pc100_fb_gpio_setup_24bpp, diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 48d018f..af528f9 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -96,38 +96,34 @@ static struct s3c2410_uartcfg aquila_uartcfgs[] __initdata = { /* Frame Buffer */ static struct s3c_fb_pd_win aquila_fb_win0 = { - .win_mode = { - .left_margin = 16, - .right_margin = 16, - .upper_margin = 3, - .lower_margin = 28, - .hsync_len = 2, - .vsync_len = 2, - .xres = 480, - .yres = 800, - }, .max_bpp = 32, .default_bpp = 16, + .xres = 480, + .yres = 800, }; static struct s3c_fb_pd_win aquila_fb_win1 = { - .win_mode = { - .left_margin = 16, - .right_margin = 16, - .upper_margin = 3, - .lower_margin = 28, - .hsync_len = 2, - .vsync_len = 2, - .xres = 480, - .yres = 800, - }, .max_bpp = 32, .default_bpp = 16, + .xres = 480, + .yres = 800, +}; + +static struct fb_videomode aquila_lcd_timing = { + .left_margin = 16, + .right_margin = 16, + .upper_margin = 3, + .lower_margin = 28, + .hsync_len = 2, + .vsync_len = 2, + .xres = 480, + .yres = 800, }; static struct s3c_fb_platdata aquila_lcd_pdata __initdata = { .win[0] = &aquila_fb_win0, .win[1] = &aquila_fb_win1, + .vtiming = &aquila_lcd_timing, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC | VIDCON1_INV_VCLK | VIDCON1_INV_VDEN, diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index f20a97c..bf5087c 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -107,25 +107,29 @@ static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = { /* Frame Buffer */ static struct s3c_fb_pd_win goni_fb_win0 = { - .win_mode = { - .left_margin = 16, - .right_margin = 16, - .upper_margin = 2, - .lower_margin = 28, - .hsync_len = 2, - .vsync_len = 1, - .xres = 480, - .yres = 800, - .refresh = 55, - }, .max_bpp = 32, .default_bpp = 16, + .xres = 480, + .yres = 800, .virtual_x = 480, .virtual_y = 2 * 800, }; +static struct fb_videomode goni_lcd_timing = { + .left_margin = 16, + .right_margin = 16, + .upper_margin = 2, + .lower_margin = 28, + .hsync_len = 2, + .vsync_len = 1, + .xres = 480, + .yres = 800, + .refresh = 55, +}; + static struct s3c_fb_platdata goni_lcd_pdata __initdata = { .win[0] = &goni_fb_win0, + .vtiming = &goni_lcd_timing, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB | VIDCON0_CLKSEL_LCD, .vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index fa1b612..0d7ddec 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -178,22 +178,26 @@ static struct platform_device smdkv210_lcd_lte480wv = { }; static struct s3c_fb_pd_win smdkv210_fb_win0 = { - .win_mode = { - .left_margin = 13, - .right_margin = 8, - .upper_margin = 7, - .lower_margin = 5, - .hsync_len = 3, - .vsync_len = 1, - .xres = 800, - .yres = 480, - }, .max_bpp = 32, .default_bpp = 24, + .xres = 800, + .yres = 480, +}; + +static struct fb_videomode smdkv210_lcd_timing = { + .left_margin = 13, + .right_margin = 8, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, }; static struct s3c_fb_platdata smdkv210_lcd0_pdata __initdata = { .win[0] = &smdkv210_fb_win0, + .vtiming = &smdkv210_lcd_timing, .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, .setup_gpio = s5pv210_fb_gpio_setup_24bpp, diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c index b29a788..1f47d96 100644 --- a/arch/arm/mach-ux500/board-mop500-uib.c +++ b/arch/arm/mach-ux500/board-mop500-uib.c @@ -96,7 +96,7 @@ static void __init __mop500_uib_init(struct uib *uib, const char *why) /* * Detect the UIB attached based on the presence or absence of i2c devices. */ -static int __init mop500_uib_init(void) +int __init mop500_uib_init(void) { struct uib *uib = mop500_uib; struct i2c_adapter *i2c0; @@ -131,5 +131,3 @@ static int __init mop500_uib_init(void) return 0; } - -module_init(mop500_uib_init); diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index fba8ade..9c74ac5 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -673,9 +673,15 @@ static void __init u8500_cryp1_hash1_init(struct device *parent) static struct platform_device *snowball_platform_devs[] __initdata = { &snowball_led_dev, &snowball_key_dev, + &snowball_sbnet_dev, &ab8500_device, }; +static struct platform_device *snowball_of_platform_devs[] __initdata = { + &snowball_led_dev, + &snowball_key_dev, +}; + static void __init mop500_init_machine(void) { struct device *parent = NULL; @@ -710,6 +716,8 @@ static void __init mop500_init_machine(void) /* This board has full regulator constraints */ regulator_has_full_constraints(); + + mop500_uib_init(); } static void __init snowball_init_machine(void) @@ -774,6 +782,8 @@ static void __init hrefv60_init_machine(void) /* This board has full regulator constraints */ regulator_has_full_constraints(); + + mop500_uib_init(); } MACHINE_START(U8500, "ST-Ericsson MOP500 platform") @@ -834,6 +844,10 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { static const struct of_device_id u8500_local_bus_nodes[] = { /* only create devices below soc node */ { .compatible = "stericsson,db8500", }, + { .compatible = "stericsson,db8500-prcmu", }, + { .compatible = "stericsson,db8500-prcmu-regulator", }, + { .compatible = "stericsson,ab8500", }, + { .compatible = "stericsson,ab8500-regulator", }, { .compatible = "simple-bus"}, { }, }; @@ -852,7 +866,7 @@ static void __init u8500_init_machine(void) else if (of_machine_is_compatible("st-ericsson,hrefv60+")) hrefv60_pinmaps_init(); - parent = u8500_init_devices(); + parent = u8500_of_init_devices(); for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) mop500_platform_devs[i]->dev.parent = parent; @@ -869,15 +883,23 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); mop500_sdi_init(parent); - i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, ARRAY_SIZE(mop500_i2c2_devices)); + mop500_uib_init(); + } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { - platform_add_devices(snowball_platform_devs, - ARRAY_SIZE(snowball_platform_devs)); + /* + * Devices to be DT:ed: + * snowball_led_dev = todo + * snowball_key_dev = todo + * snowball_sbnet_dev = done + * ab8500_device = done + */ + platform_add_devices(snowball_of_platform_devs, + ARRAY_SIZE(snowball_of_platform_devs)); snowball_sdi_init(parent); } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) { @@ -898,6 +920,8 @@ static void __init u8500_init_machine(void) i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, ARRAY_SIZE(mop500_i2c2_devices)); + + mop500_uib_init(); } mop500_i2c_init(parent); diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index bc44c07..2f87b25 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -89,7 +89,11 @@ void __init mop500_pinmaps_init(void); void __init snowball_pinmaps_init(void); void __init hrefv60_pinmaps_init(void); +int __init mop500_uib_init(void); void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, unsigned n); +/* TODO: Once all pieces are DT:ed, remove completely. */ +struct device * __init u8500_of_init_devices(void); + #endif diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 16169c4..33275eb 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -140,7 +140,6 @@ static struct platform_device *platform_devs[] __initdata = { static struct platform_device *of_platform_devs[] __initdata = { &u8500_dma40_device, &db8500_pmu_device, - &db8500_prcmu_device, }; static resource_size_t __initdata db8500_gpio_base[] = { @@ -222,6 +221,28 @@ struct device * __init u8500_init_devices(void) platform_device_register_data(parent, "cpufreq-u8500", -1, NULL, 0); + for (i = 0; i < ARRAY_SIZE(platform_devs); i++) + platform_devs[i]->dev.parent = parent; + + platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); + + return parent; +} + +/* TODO: Once all pieces are DT:ed, remove completely. */ +struct device * __init u8500_of_init_devices(void) +{ + struct device *parent; + int i; + + parent = db8500_soc_device_init(); + + db8500_add_rtc(parent); + db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); + + platform_device_register_data(parent, + "cpufreq-u8500", -1, NULL, 0); + for (i = 0; i < ARRAY_SIZE(of_platform_devs); i++) of_platform_devs[i]->dev.parent = parent; @@ -229,7 +250,7 @@ struct device * __init u8500_init_devices(void) * Devices to be DT:ed: * u8500_dma40_device = todo * db8500_pmu_device = todo - * db8500_prcmu_device = todo + * db8500_prcmu_device = done */ platform_add_devices(of_platform_devs, ARRAY_SIZE(of_platform_devs)); diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index 1527929..f37764a 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -92,6 +92,8 @@ enum omap_ecc { OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */ /* 1-bit ecc: stored at beginning of spare area as romcode */ OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */ + OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */ + OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */ }; /* @@ -157,4 +159,13 @@ extern int gpmc_nand_write(int cs, int cmd, int wval); int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size); int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code); + +#ifdef CONFIG_ARCH_OMAP3 +int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors); +int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors, + int nerrors); +int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc); +int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc); +#endif /* CONFIG_ARCH_OMAP3 */ + #endif diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h index 0fedf47..536002f 100644 --- a/arch/arm/plat-samsung/include/plat/fb.h +++ b/arch/arm/plat-samsung/include/plat/fb.h @@ -24,15 +24,16 @@ /** * struct s3c_fb_pd_win - per window setup data - * @win_mode: The display parameters to initialise (not for window 0) + * @xres : The window X size. + * @yres : The window Y size. * @virtual_x: The virtual X size. * @virtual_y: The virtual Y size. */ struct s3c_fb_pd_win { - struct fb_videomode win_mode; - unsigned short default_bpp; unsigned short max_bpp; + unsigned short xres; + unsigned short yres; unsigned short virtual_x; unsigned short virtual_y; }; @@ -45,6 +46,7 @@ struct s3c_fb_pd_win { * @default_win: default window layer number to be used for UI layer. * @vidcon0: The base vidcon0 values to control the panel data format. * @vidcon1: The base vidcon1 values to control the panel data output. + * @vtiming: Video timing when connected to a RGB type panel. * @win: The setup data for each hardware window, or NULL for unused. * @display_mode: The LCD output display mode. * @@ -58,8 +60,7 @@ struct s3c_fb_platdata { void (*setup_gpio)(void); struct s3c_fb_pd_win *win[S3C_FB_MAX_WIN]; - - u32 default_win; + struct fb_videomode *vtiming; u32 vidcon0; u32 vidcon1; diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c index f6ffd6f..0b74218 100644 --- a/arch/blackfin/mach-bf561/boards/acvilon.c +++ b/arch/blackfin/mach-bf561/boards/acvilon.c @@ -248,8 +248,6 @@ static struct platform_device bfin_uart0_device = { #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) -const char *part_probes[] = { "cmdlinepart", NULL }; - static struct mtd_partition bfin_plat_nand_partitions[] = { { .name = "params(nand)", @@ -289,7 +287,6 @@ static struct platform_nand_data bfin_plat_nand_data = { .chip = { .nr_chips = 1, .chip_delay = 30, - .part_probe_types = part_probes, .partitions = bfin_plat_nand_partitions, .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions), }, diff --git a/arch/frv/kernel/signal.c b/arch/frv/kernel/signal.c index f3b9064..864c2f0 100644 --- a/arch/frv/kernel/signal.c +++ b/arch/frv/kernel/signal.c @@ -518,7 +518,7 @@ asmlinkage void do_notify_resume(__u32 thread_info_flags) clear_thread_flag(TIF_SINGLESTEP); /* deal with pending signal delivery */ - if (thread_info_flags & _TIF_SIGPENDING)) + if (thread_info_flags & _TIF_SIGPENDING) do_signal(); /* deal with notification on about to resume userspace execution */ diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c index 7dde016..bf22484 100644 --- a/arch/mips/alchemy/devboards/db1200.c +++ b/arch/mips/alchemy/devboards/db1200.c @@ -213,8 +213,6 @@ static int au1200_nand_device_ready(struct mtd_info *mtd) return __raw_readl((void __iomem *)MEM_STSTAT) & 1; } -static const char *db1200_part_probes[] = { "cmdlinepart", NULL }; - static struct mtd_partition db1200_nand_parts[] = { { .name = "NAND FS 0", @@ -235,7 +233,6 @@ struct platform_nand_data db1200_nand_platdata = { .nr_partitions = ARRAY_SIZE(db1200_nand_parts), .partitions = db1200_nand_parts, .chip_delay = 20, - .part_probe_types = db1200_part_probes, }, .ctrl = { .dev_ready = au1200_nand_device_ready, diff --git a/arch/mips/alchemy/devboards/db1300.c b/arch/mips/alchemy/devboards/db1300.c index 0893f2a..c56e024 100644 --- a/arch/mips/alchemy/devboards/db1300.c +++ b/arch/mips/alchemy/devboards/db1300.c @@ -145,8 +145,6 @@ static int au1300_nand_device_ready(struct mtd_info *mtd) return __raw_readl((void __iomem *)MEM_STSTAT) & 1; } -static const char *db1300_part_probes[] = { "cmdlinepart", NULL }; - static struct mtd_partition db1300_nand_parts[] = { { .name = "NAND FS 0", @@ -167,7 +165,6 @@ struct platform_nand_data db1300_nand_platdata = { .nr_partitions = ARRAY_SIZE(db1300_nand_parts), .partitions = db1300_nand_parts, .chip_delay = 20, - .part_probe_types = db1300_part_probes, }, .ctrl = { .dev_ready = au1300_nand_device_ready, diff --git a/arch/mips/alchemy/devboards/db1550.c b/arch/mips/alchemy/devboards/db1550.c index 6815d07..9eb7906 100644 --- a/arch/mips/alchemy/devboards/db1550.c +++ b/arch/mips/alchemy/devboards/db1550.c @@ -149,8 +149,6 @@ static int au1550_nand_device_ready(struct mtd_info *mtd) return __raw_readl((void __iomem *)MEM_STSTAT) & 1; } -static const char *db1550_part_probes[] = { "cmdlinepart", NULL }; - static struct mtd_partition db1550_nand_parts[] = { { .name = "NAND FS 0", @@ -171,7 +169,6 @@ struct platform_nand_data db1550_nand_platdata = { .nr_partitions = ARRAY_SIZE(db1550_nand_parts), .partitions = db1550_nand_parts, .chip_delay = 20, - .part_probe_types = db1550_part_probes, }, .ctrl = { .dev_ready = au1550_nand_device_ready, diff --git a/arch/mips/pnx833x/common/platform.c b/arch/mips/pnx833x/common/platform.c index 87167dc..05a1d92 100644 --- a/arch/mips/pnx833x/common/platform.c +++ b/arch/mips/pnx833x/common/platform.c @@ -244,11 +244,6 @@ static struct platform_device pnx833x_sata_device = { .resource = pnx833x_sata_resources, }; -static const char *part_probes[] = { - "cmdlinepart", - NULL -}; - static void pnx833x_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) { @@ -268,7 +263,6 @@ static struct platform_nand_data pnx833x_flash_nand_data = { .chip = { .nr_chips = 1, .chip_delay = 25, - .part_probe_types = part_probes, }, .ctrl = { .cmd_ctrl = pnx833x_flash_nand_cmd_ctrl diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c index ea77428..716e9a1 100644 --- a/arch/mips/rb532/devices.c +++ b/arch/mips/rb532/devices.c @@ -293,7 +293,6 @@ static void __init rb532_nand_setup(void) rb532_nand_data.chip.nr_partitions = ARRAY_SIZE(rb532_partition_info); rb532_nand_data.chip.partitions = rb532_partition_info; rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY; - rb532_nand_data.chip.options = NAND_NO_AUTOINCR; } diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index 34cd0c5..a8a1ca7 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -188,7 +188,6 @@ static struct platform_nand_data migor_nand_flash_data = { .partitions = migor_nand_flash_partitions, .nr_partitions = ARRAY_SIZE(migor_nand_flash_partitions), .chip_delay = 20, - .part_probe_types = (const char *[]) { "cmdlinepart", NULL }, }, .ctrl = { .dev_ready = migor_nand_flash_ready, |