diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/powerpc/include/asm/opal.h | 50 | ||||
-rw-r--r-- | arch/powerpc/kernel/head_64.S | 4 | ||||
-rw-r--r-- | arch/powerpc/kernel/prom_init.c | 239 | ||||
-rw-r--r-- | arch/powerpc/kernel/prom_init_check.sh | 3 | ||||
-rw-r--r-- | arch/powerpc/platforms/powernv/Makefile | 2 | ||||
-rw-r--r-- | arch/powerpc/platforms/powernv/opal-takeover.S | 140 |
6 files changed, 419 insertions, 19 deletions
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h new file mode 100644 index 0000000..ecdb283 --- /dev/null +++ b/arch/powerpc/include/asm/opal.h @@ -0,0 +1,50 @@ +/* + * PowerNV OPAL definitions. + * + * Copyright 2011 IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef __OPAL_H +#define __OPAL_H + +/****** Takeover interface ********/ + +/* PAPR H-Call used to querty the HAL existence and/or instanciate + * it from within pHyp (tech preview only). + * + * This is exclusively used in prom_init.c + */ + +#ifndef __ASSEMBLY__ + +struct opal_takeover_args { + u64 k_image; /* r4 */ + u64 k_size; /* r5 */ + u64 k_entry; /* r6 */ + u64 k_entry2; /* r7 */ + u64 hal_addr; /* r8 */ + u64 rd_image; /* r9 */ + u64 rd_size; /* r10 */ + u64 rd_loc; /* r11 */ +}; + +extern long opal_query_takeover(u64 *hal_size, u64 *hal_align); + +extern long opal_do_takeover(struct opal_takeover_args *args); + +extern int opal_enter_rtas(struct rtas_args *args, + unsigned long data, + unsigned long entry); + + +#endif /* __ASSEMBLY__ */ + +/****** OPAL APIs ******/ + + +#endif /* __OPAL_H */ diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index e708abe..dea8191 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -51,6 +51,10 @@ * For pSeries or server processors: * 1. The MMU is off & open firmware is running in real mode. * 2. The kernel is entered at __start + * -or- For OPAL entry: + * 1. The MMU is off, processor in HV mode, primary CPU enters at 0 + * with device-tree in gpr3 + * 2. Secondary processors enter at 0x60 with PIR in gpr3 * * For iSeries: * 1. The MMU is on (as it always is for iSeries) diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index a909f4e..9369287 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -43,6 +43,7 @@ #include <asm/btext.h> #include <asm/sections.h> #include <asm/machdep.h> +#include <asm/opal.h> #include <linux/linux_logo.h> @@ -185,6 +186,7 @@ static unsigned long __initdata prom_tce_alloc_end; #define PLATFORM_LPAR 0x0001 #define PLATFORM_POWERMAC 0x0400 #define PLATFORM_GENERIC 0x0500 +#define PLATFORM_OPAL 0x0600 static int __initdata of_platform; @@ -644,7 +646,7 @@ static void __init early_cmdline_parse(void) } } -#ifdef CONFIG_PPC_PSERIES +#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) /* * There are two methods for telling firmware what our capabilities are. * Newer machines have an "ibm,client-architecture-support" method on the @@ -1274,6 +1276,195 @@ static void __init prom_init_mem(void) prom_printf(" ram_top : %x\n", RELOC(ram_top)); } +static void __init prom_close_stdin(void) +{ + struct prom_t *_prom = &RELOC(prom); + ihandle val; + + if (prom_getprop(_prom->chosen, "stdin", &val, sizeof(val)) > 0) + call_prom("close", 1, 0, val); +} + +#ifdef CONFIG_PPC_POWERNV + +static u64 __initdata prom_opal_size; +static u64 __initdata prom_opal_align; +static int __initdata prom_rtas_start_cpu; +static u64 __initdata prom_rtas_data; +static u64 __initdata prom_rtas_entry; + +/* XXX Don't change this structure without updating opal-takeover.S */ +static struct opal_secondary_data { + s64 ack; /* 0 */ + u64 go; /* 8 */ + struct opal_takeover_args args; /* 16 */ +} opal_secondary_data; + +extern char opal_secondary_entry; + +static void prom_query_opal(void) +{ + long rc; + + prom_printf("Querying for OPAL presence... "); + rc = opal_query_takeover(&RELOC(prom_opal_size), + &RELOC(prom_opal_align)); + prom_debug("(rc = %ld) ", rc); + if (rc != 0) { + prom_printf("not there.\n"); + return; + } + RELOC(of_platform) = PLATFORM_OPAL; + prom_printf(" there !\n"); + prom_debug(" opal_size = 0x%lx\n", RELOC(prom_opal_size)); + prom_debug(" opal_align = 0x%lx\n", RELOC(prom_opal_align)); + if (RELOC(prom_opal_align) < 0x10000) + RELOC(prom_opal_align) = 0x10000; +} + +static int prom_rtas_call(int token, int nargs, int nret, int *outputs, ...) +{ + struct rtas_args rtas_args; + va_list list; + int i; + + rtas_args.token = token; + rtas_args.nargs = nargs; + rtas_args.nret = nret; + rtas_args.rets = (rtas_arg_t *)&(rtas_args.args[nargs]); + va_start(list, outputs); + for (i = 0; i < nargs; ++i) + rtas_args.args[i] = va_arg(list, rtas_arg_t); + va_end(list); + + for (i = 0; i < nret; ++i) + rtas_args.rets[i] = 0; + + opal_enter_rtas(&rtas_args, RELOC(prom_rtas_data), + RELOC(prom_rtas_entry)); + + if (nret > 1 && outputs != NULL) + for (i = 0; i < nret-1; ++i) + outputs[i] = rtas_args.rets[i+1]; + return (nret > 0)? rtas_args.rets[0]: 0; +} + +static void __init prom_opal_hold_cpus(void) +{ + int i, cnt, cpu, rc; + long j; + phandle node; + char type[64]; + u32 servers[8]; + struct prom_t *_prom = &RELOC(prom); + void *entry = (unsigned long *)&RELOC(opal_secondary_entry); + struct opal_secondary_data *data = &RELOC(opal_secondary_data); + + prom_debug("prom_opal_hold_cpus: start...\n"); + prom_debug(" - entry = 0x%x\n", entry); + prom_debug(" - data = 0x%x\n", data); + + data->ack = -1; + data->go = 0; + + /* look for cpus */ + for (node = 0; prom_next_node(&node); ) { + type[0] = 0; + prom_getprop(node, "device_type", type, sizeof(type)); + if (strcmp(type, RELOC("cpu")) != 0) + continue; + + /* Skip non-configured cpus. */ + if (prom_getprop(node, "status", type, sizeof(type)) > 0) + if (strcmp(type, RELOC("okay")) != 0) + continue; + + cnt = prom_getprop(node, "ibm,ppc-interrupt-server#s", servers, + sizeof(servers)); + if (cnt == PROM_ERROR) + break; + cnt >>= 2; + for (i = 0; i < cnt; i++) { + cpu = servers[i]; + prom_debug("CPU %d ... ", cpu); + if (cpu == _prom->cpu) { + prom_debug("booted !\n"); + continue; + } + prom_debug("starting ... "); + + /* Init the acknowledge var which will be reset by + * the secondary cpu when it awakens from its OF + * spinloop. + */ + data->ack = -1; + rc = prom_rtas_call(RELOC(prom_rtas_start_cpu), 3, 1, + NULL, cpu, entry, data); + prom_debug("rtas rc=%d ...", rc); + + for (j = 0; j < 100000000 && data->ack == -1; j++) { + HMT_low(); + mb(); + } + HMT_medium(); + if (data->ack != -1) + prom_debug("done, PIR=0x%x\n", data->ack); + else + prom_debug("timeout !\n"); + } + } + prom_debug("prom_opal_hold_cpus: end...\n"); +} + +static void prom_opal_takeover(void) +{ + struct opal_secondary_data *data = &RELOC(opal_secondary_data); + struct opal_takeover_args *args = &data->args; + u64 align = RELOC(prom_opal_align); + u64 top_addr, opal_addr; + + args->k_image = (u64)RELOC(_stext); + args->k_size = _end - _stext; + args->k_entry = 0; + args->k_entry2 = 0x60; + + top_addr = _ALIGN_UP(args->k_size, align); + + if (RELOC(prom_initrd_start) != 0) { + args->rd_image = RELOC(prom_initrd_start); + args->rd_size = RELOC(prom_initrd_end) - args->rd_image; + args->rd_loc = top_addr; + top_addr = _ALIGN_UP(args->rd_loc + args->rd_size, align); + } + + /* Pickup an address for the HAL. We want to go really high + * up to avoid problem with future kexecs. On the other hand + * we don't want to be all over the TCEs on P5IOC2 machines + * which are going to be up there too. We assume the machine + * has plenty of memory, and we ask for the HAL for now to + * be just below the 1G point, or above the initrd + */ + opal_addr = _ALIGN_DOWN(0x40000000 - RELOC(prom_opal_size), align); + if (opal_addr < top_addr) + opal_addr = top_addr; + args->hal_addr = opal_addr; + + prom_debug(" k_image = 0x%lx\n", args->k_image); + prom_debug(" k_size = 0x%lx\n", args->k_size); + prom_debug(" k_entry = 0x%lx\n", args->k_entry); + prom_debug(" k_entry2 = 0x%lx\n", args->k_entry2); + prom_debug(" hal_addr = 0x%lx\n", args->hal_addr); + prom_debug(" rd_image = 0x%lx\n", args->rd_image); + prom_debug(" rd_size = 0x%lx\n", args->rd_size); + prom_debug(" rd_loc = 0x%lx\n", args->rd_loc); + prom_printf("Performing OPAL takeover,this can take a few minutes..\n"); + prom_close_stdin(); + mb(); + data->go = 1; + for (;;) + opal_do_takeover(args); +} +#endif /* CONFIG_PPC_POWERNV */ /* * Allocate room for and instantiate RTAS @@ -1326,6 +1517,12 @@ static void __init prom_instantiate_rtas(void) prom_setprop(rtas_node, "/rtas", "linux,rtas-entry", &entry, sizeof(entry)); +#ifdef CONFIG_PPC_POWERNV + /* PowerVN takeover hack */ + RELOC(prom_rtas_data) = base; + RELOC(prom_rtas_entry) = entry; + prom_getprop(rtas_node, "start-cpu", &RELOC(prom_rtas_start_cpu), 4); +#endif prom_debug("rtas base = 0x%x\n", base); prom_debug("rtas entry = 0x%x\n", entry); prom_debug("rtas size = 0x%x\n", (long)size); @@ -1543,7 +1740,7 @@ static void __init prom_hold_cpus(void) *acknowledge = (unsigned long)-1; if (reg != _prom->cpu) { - /* Primary Thread of non-boot cpu */ + /* Primary Thread of non-boot cpu or any thread */ prom_printf("starting cpu hw idx %lu... ", reg); call_prom("start-cpu", 3, 0, node, secondary_hold, reg); @@ -1652,15 +1849,6 @@ static void __init prom_init_stdout(void) prom_setprop(val, path, "linux,boot-display", NULL, 0); } -static void __init prom_close_stdin(void) -{ - struct prom_t *_prom = &RELOC(prom); - ihandle val; - - if (prom_getprop(_prom->chosen, "stdin", &val, sizeof(val)) > 0) - call_prom("close", 1, 0, val); -} - static int __init prom_find_machine_type(void) { struct prom_t *_prom = &RELOC(prom); @@ -2504,6 +2692,7 @@ static void __init prom_check_initrd(unsigned long r3, unsigned long r4) #endif /* CONFIG_BLK_DEV_INITRD */ } + /* * We enter here early on, when the Open Firmware prom is still * handling exceptions and the MMU hash table for us. @@ -2565,7 +2754,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, */ prom_check_initrd(r3, r4); -#ifdef CONFIG_PPC_PSERIES +#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) /* * On pSeries, inform the firmware about our capabilities */ @@ -2611,14 +2800,30 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, #endif /* - * On non-powermacs, try to instantiate RTAS and puts all CPUs - * in spin-loops. PowerMacs don't have a working RTAS and use - * a different way to spin CPUs + * On non-powermacs, try to instantiate RTAS. PowerMacs don't + * have a usable RTAS implementation. */ - if (RELOC(of_platform) != PLATFORM_POWERMAC) { + if (RELOC(of_platform) != PLATFORM_POWERMAC) prom_instantiate_rtas(); - prom_hold_cpus(); + +#ifdef CONFIG_PPC_POWERNV + /* Detect HAL and try instanciating it & doing takeover */ + if (RELOC(of_platform) == PLATFORM_PSERIES_LPAR) { + prom_query_opal(); + if (RELOC(of_platform) == PLATFORM_OPAL) { + prom_opal_hold_cpus(); + prom_opal_takeover(); + } } +#endif + + /* + * On non-powermacs, put all CPUs in spin-loops. + * + * PowerMacs use a different mechanism to spin CPUs + */ + if (RELOC(of_platform) != PLATFORM_POWERMAC) + prom_hold_cpus(); /* * Fill in some infos for use by the kernel later on diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh index 9f82f49..20af6aa 100644 --- a/arch/powerpc/kernel/prom_init_check.sh +++ b/arch/powerpc/kernel/prom_init_check.sh @@ -20,7 +20,8 @@ WHITELIST="add_reloc_offset __bss_start __bss_stop copy_and_flush _end enter_prom memcpy memset reloc_offset __secondary_hold __secondary_hold_acknowledge __secondary_hold_spinloop __start strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224 -reloc_got2 kernstart_addr memstart_addr linux_banner" +reloc_got2 kernstart_addr memstart_addr linux_banner _stext +opal_query_takeover opal_do_takeover opal_enter_rtas opal_secondary_entry" NM="$1" OBJ="$2" diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile index 1c43250..4971330 100644 --- a/arch/powerpc/platforms/powernv/Makefile +++ b/arch/powerpc/platforms/powernv/Makefile @@ -1,2 +1,2 @@ -obj-y += setup.o +obj-y += setup.o opal-takeover.o obj-$(CONFIG_SMP) += smp.o diff --git a/arch/powerpc/platforms/powernv/opal-takeover.S b/arch/powerpc/platforms/powernv/opal-takeover.S new file mode 100644 index 0000000..77b48b2 --- /dev/null +++ b/arch/powerpc/platforms/powernv/opal-takeover.S @@ -0,0 +1,140 @@ +/* + * PowerNV OPAL takeover assembly code, for use by prom_init.c + * + * Copyright 2011 IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <asm/ppc_asm.h> +#include <asm/hvcall.h> +#include <asm/asm-offsets.h> +#include <asm/opal.h> + +#define STK_PARAM(i) (48 + ((i)-3)*8) + +#define H_HAL_TAKEOVER 0x5124 +#define H_HAL_TAKEOVER_QUERY_MAGIC -1 + + .text +_GLOBAL(opal_query_takeover) + mfcr r0 + stw r0,8(r1) + std r3,STK_PARAM(r3)(r1) + std r4,STK_PARAM(r4)(r1) + li r3,H_HAL_TAKEOVER + li r4,H_HAL_TAKEOVER_QUERY_MAGIC + HVSC + ld r10,STK_PARAM(r3)(r1) + std r4,0(r10) + ld r10,STK_PARAM(r4)(r1) + std r5,0(r10) + lwz r0,8(r1) + mtcrf 0xff,r0 + blr + +_GLOBAL(opal_do_takeover) + mfcr r0 + stw r0,8(r1) + mflr r0 + std r0,16(r1) + bl __opal_do_takeover + ld r0,16(r1) + mtlr r0 + lwz r0,8(r1) + mtcrf 0xff,r0 + blr + +__opal_do_takeover: + ld r4,0(r3) + ld r5,0x8(r3) + ld r6,0x10(r3) + ld r7,0x18(r3) + ld r8,0x20(r3) + ld r9,0x28(r3) + ld r10,0x30(r3) + ld r11,0x38(r3) + li r3,H_HAL_TAKEOVER + HVSC + blr + + .globl opal_secondary_entry +opal_secondary_entry: + mr r31,r3 + mfmsr r11 + li r12,(MSR_SF | MSR_ISF)@highest + sldi r12,r12,48 + or r11,r11,r12 + mtmsrd r11 + isync + mfspr r4,SPRN_PIR + std r4,0(r3) +1: HMT_LOW + ld r4,8(r3) + cmpli cr0,r4,0 + beq 1b + HMT_MEDIUM +1: addi r3,r31,16 + bl __opal_do_takeover + b 1b + +_GLOBAL(opal_enter_rtas) + mflr r0 + std r0,16(r1) + stdu r1,-PROM_FRAME_SIZE(r1) /* Save SP and create stack space */ + + /* Because PROM is running in 32b mode, it clobbers the high order half + * of all registers that it saves. We therefore save those registers + * PROM might touch to the stack. (r0, r3-r13 are caller saved) + */ + SAVE_GPR(2, r1) + SAVE_GPR(13, r1) + SAVE_8GPRS(14, r1) + SAVE_10GPRS(22, r1) + mfcr r10 + mfmsr r11 + std r10,_CCR(r1) + std r11,_MSR(r1) + + /* Get the PROM entrypoint */ + mtlr r5 + + /* Switch MSR to 32 bits mode + */ + li r12,1 + rldicr r12,r12,MSR_SF_LG,(63-MSR_SF_LG) + andc r11,r11,r12 + li r12,1 + rldicr r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG) + andc r11,r11,r12 + mtmsrd r11 + isync + + /* Enter RTAS here... */ + blrl + + /* Just make sure that r1 top 32 bits didn't get + * corrupt by OF + */ + rldicl r1,r1,0,32 + + /* Restore the MSR (back to 64 bits) */ + ld r0,_MSR(r1) + MTMSRD(r0) + isync + + /* Restore other registers */ + REST_GPR(2, r1) + REST_GPR(13, r1) + REST_8GPRS(14, r1) + REST_10GPRS(22, r1) + ld r4,_CCR(r1) + mtcr r4 + + addi r1,r1,PROM_FRAME_SIZE + ld r0,16(r1) + mtlr r0 + blr |