summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/alpha/mm/numa.c2
-rw-r--r--arch/arm/common/scoop.c2
-rw-r--r--arch/arm/mach-bcmring/include/csp/reg.h2
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h2
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/mm_addr.h2
-rw-r--r--arch/arm/mach-bcmring/include/mach/dma.h2
-rw-r--r--arch/arm/mach-lh7a40x/include/mach/hardware.h2
-rw-r--r--arch/arm/mach-orion5x/pci.c2
-rw-r--r--arch/arm/mach-pxa/include/mach/palmld.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/palmt5.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/palmtc.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/palmte2.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/palmtx.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/palmz72.h2
-rw-r--r--arch/arm/mach-s3c2400/Kconfig6
-rw-r--r--arch/arm/mach-s3c2410/Kconfig2
-rw-r--r--arch/arm/mach-s3c2412/Kconfig4
-rw-r--r--arch/arm/mach-s3c2440/Kconfig3
-rw-r--r--arch/arm/mach-s3c2442/Kconfig4
-rw-r--r--arch/arm/mach-s3c2443/Kconfig2
-rw-r--r--arch/arm/mach-s3c6400/Kconfig2
-rw-r--r--arch/arm/mach-s3c6400/setup-sdhci.c2
-rw-r--r--arch/arm/mach-s3c6410/Kconfig2
-rw-r--r--arch/arm/mach-s3c6410/setup-sdhci.c2
-rw-r--r--arch/arm/mach-s5pc100/Kconfig2
-rw-r--r--arch/arm/mach-sa1100/dma.c2
-rw-r--r--arch/arm/mach-u300/include/mach/u300-regs.h2
-rw-r--r--arch/arm/plat-mxc/include/mach/iomux-mx3.h2
-rw-r--r--arch/arm/plat-mxc/include/mach/iomux-mxc91231.h2
-rw-r--r--arch/arm/plat-mxc/pwm.c2
-rw-r--r--arch/arm/plat-omap/dma.c2
-rw-r--r--arch/arm/plat-omap/include/plat/omap16xx.h2
-rw-r--r--arch/arm/plat-s3c/Kconfig2
-rw-r--r--arch/arm/plat-s3c24xx/Kconfig2
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/map.h2
-rw-r--r--arch/arm/plat-s3c64xx/Kconfig2
-rw-r--r--arch/arm/plat-s5pc1xx/Kconfig2
-rw-r--r--arch/avr32/boards/hammerhead/Kconfig2
-rw-r--r--arch/blackfin/kernel/traps.c2
-rw-r--r--arch/blackfin/mach-bf518/include/mach/defBF51x_base.h4
-rw-r--r--arch/blackfin/mach-bf527/include/mach/defBF52x_base.h4
-rw-r--r--arch/blackfin/mach-bf537/include/mach/defBF534.h4
-rw-r--r--arch/blackfin/mach-bf548/include/mach/defBF544.h4
-rw-r--r--arch/blackfin/mach-bf548/include/mach/defBF547.h4
-rw-r--r--arch/blackfin/mach-bf548/include/mach/defBF548.h4
-rw-r--r--arch/blackfin/mach-bf548/include/mach/defBF549.h4
-rw-r--r--arch/cris/arch-v10/mm/fault.c3
-rw-r--r--arch/cris/arch-v10/mm/tlb.c22
-rw-r--r--arch/cris/mm/fault.c2
-rw-r--r--arch/ia64/hp/common/sba_iommu.c2
-rw-r--r--arch/ia64/ia32/ia32_entry.S2
-rw-r--r--arch/ia64/include/asm/perfmon_default_smpl.h2
-rw-r--r--arch/ia64/include/asm/sn/shubio.h2
-rw-r--r--arch/ia64/kernel/esi.c2
-rw-r--r--arch/ia64/kernel/perfmon.c2
-rw-r--r--arch/m68k/ifpsp060/src/fpsp.S28
-rw-r--r--arch/m68k/ifpsp060/src/pfpsp.S26
-rw-r--r--arch/m68k/include/asm/bootinfo.h2
-rw-r--r--arch/microblaze/lib/memcpy.c2
-rw-r--r--arch/microblaze/lib/memmove.c2
-rw-r--r--arch/microblaze/lib/memset.c2
-rw-r--r--arch/mips/include/asm/mach-pnx833x/gpio.h2
-rw-r--r--arch/mips/include/asm/sgi/ioc.h2
-rw-r--r--arch/mips/include/asm/sibyte/sb1250_mac.h2
-rw-r--r--arch/mips/include/asm/sn/sn0/hubio.h2
-rw-r--r--arch/mips/kernel/smtc.c2
-rw-r--r--arch/mips/math-emu/dp_sub.c2
-rw-r--r--arch/mips/txx9/generic/smsc_fdc37m81x.c2
-rw-r--r--arch/parisc/kernel/perf.c2
-rw-r--r--arch/powerpc/include/asm/reg_fsl_emb.h2
-rw-r--r--arch/powerpc/kernel/kgdb.c2
-rw-r--r--arch/powerpc/kernel/tau_6xx.c2
-rw-r--r--arch/powerpc/kernel/vdso.c2
-rw-r--r--arch/powerpc/oprofile/op_model_cell.c6
-rw-r--r--arch/powerpc/platforms/52xx/mpc52xx_pci.c2
-rw-r--r--arch/powerpc/platforms/powermac/pci.c2
-rw-r--r--arch/powerpc/sysdev/dart_iommu.c2
-rw-r--r--arch/s390/math-emu/math.c4
-rw-r--r--arch/sh/include/mach-common/mach/titan.h2
-rw-r--r--arch/x86/include/asm/desc_defs.h4
-rw-r--r--arch/x86/include/asm/mmzone_32.h2
-rw-r--r--arch/x86/include/asm/sigcontext.h4
-rw-r--r--arch/x86/include/asm/uv/uv_bau.h2
-rw-r--r--arch/x86/kernel/acpi/boot.c2
-rw-r--r--arch/x86/kernel/amd_iommu.c4
-rw-r--r--arch/x86/kernel/cpu/perf_event.c2
-rw-r--r--arch/x86/kernel/kprobes.c4
-rw-r--r--arch/x86/mm/kmmio.c4
88 files changed, 114 insertions, 172 deletions
diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c
index 10b4035..7b2c56d 100644
--- a/arch/alpha/mm/numa.c
+++ b/arch/alpha/mm/numa.c
@@ -197,7 +197,7 @@ setup_memory_node(int nid, void *kernel_end)
}
if (bootmap_start == -1)
- panic("couldn't find a contigous place for the bootmap");
+ panic("couldn't find a contiguous place for the bootmap");
/* Allocate the bootmap and mark the whole MM as reserved. */
bootmap_size = init_bootmem_node(NODE_DATA(nid), bootmap_start,
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 7713a08..37bda5f 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -82,7 +82,7 @@ static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset)
{
struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
- /* XXX: I'm usure, but it seems so */
+ /* XXX: I'm unsure, but it seems so */
return ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1));
}
diff --git a/arch/arm/mach-bcmring/include/csp/reg.h b/arch/arm/mach-bcmring/include/csp/reg.h
index e5f60bf..56654d2 100644
--- a/arch/arm/mach-bcmring/include/csp/reg.h
+++ b/arch/arm/mach-bcmring/include/csp/reg.h
@@ -16,7 +16,7 @@
/**
* @file reg.h
*
-* @brief Generic register defintions used in CSP
+* @brief Generic register definitions used in CSP
*/
/****************************************************************************/
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
index 375066a..cbf334d 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
@@ -83,7 +83,7 @@ typedef struct {
* @brief Get next available transaction width
*
*
-* @return On sucess : Next avail able transaction width
+* @return On success : Next available transaction width
* On failure : dmacHw_TRANSACTION_WIDTH_8
*
* @note
diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
index 86bb58d..ad58cf8 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
@@ -16,7 +16,7 @@
/**
* @file mm_addr.h
*
-* @brief Memory Map address defintions
+* @brief Memory Map address definitions
*
* @note
* None
diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h
index 847980c..1f2c531 100644
--- a/arch/arm/mach-bcmring/include/mach/dma.h
+++ b/arch/arm/mach-bcmring/include/mach/dma.h
@@ -651,7 +651,7 @@ int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about t
/**
* Creates a descriptor ring from a memory mapping.
*
-* @return 0 on sucess, error code otherwise.
+* @return 0 on success, error code otherwise.
*/
/****************************************************************************/
diff --git a/arch/arm/mach-lh7a40x/include/mach/hardware.h b/arch/arm/mach-lh7a40x/include/mach/hardware.h
index 48e827d..59d2ace 100644
--- a/arch/arm/mach-lh7a40x/include/mach/hardware.h
+++ b/arch/arm/mach-lh7a40x/include/mach/hardware.h
@@ -31,7 +31,7 @@
/*
* This __REG() version gives the same results as the one above, except
* that we are fooling gcc somehow so it generates far better and smaller
- * assembly code for access to contigous registers. It's a shame that gcc
+ * assembly code for access to contiguous registers. It's a shame that gcc
* doesn't guess this by itself.
*/
#include <asm/types.h>
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index 36dc541..bdf96eb 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -463,7 +463,7 @@ static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram)
writel(win_enable, PCI_BAR_ENABLE);
/*
- * Disable automatic update of address remaping when writing to BARs.
+ * Disable automatic update of address remapping when writing to BARs.
*/
orion5x_setbits(PCI_ADDR_DECODE_CTRL, 1);
}
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
index 8721b80..ae536e8 100644
--- a/arch/arm/mach-pxa/include/mach/palmld.h
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@@ -91,7 +91,7 @@
/* BATTERY */
#define PALMLD_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */
#define PALMLD_BAT_MIN_VOLTAGE 3550 /* 3.55V critical voltage */
-#define PALMLD_BAT_MAX_CURRENT 0 /* unknokn */
+#define PALMLD_BAT_MAX_CURRENT 0 /* unknown */
#define PALMLD_BAT_MIN_CURRENT 0 /* unknown */
#define PALMLD_BAT_MAX_CHARGE 1 /* unknown */
#define PALMLD_BAT_MIN_CHARGE 1 /* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h
index d15662a..6baf746 100644
--- a/arch/arm/mach-pxa/include/mach/palmt5.h
+++ b/arch/arm/mach-pxa/include/mach/palmt5.h
@@ -66,7 +66,7 @@
/* BATTERY */
#define PALMT5_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */
#define PALMT5_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */
-#define PALMT5_BAT_MAX_CURRENT 0 /* unknokn */
+#define PALMT5_BAT_MAX_CURRENT 0 /* unknown */
#define PALMT5_BAT_MIN_CURRENT 0 /* unknown */
#define PALMT5_BAT_MAX_CHARGE 1 /* unknown */
#define PALMT5_BAT_MIN_CHARGE 1 /* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h
index 3dc9b07..3f9dd3f 100644
--- a/arch/arm/mach-pxa/include/mach/palmtc.h
+++ b/arch/arm/mach-pxa/include/mach/palmtc.h
@@ -68,7 +68,7 @@
/* BATTERY */
#define PALMTC_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */
#define PALMTC_BAT_MIN_VOLTAGE 3550 /* 3.55V critical voltage */
-#define PALMTC_BAT_MAX_CURRENT 0 /* unknokn */
+#define PALMTC_BAT_MAX_CURRENT 0 /* unknown */
#define PALMTC_BAT_MIN_CURRENT 0 /* unknown */
#define PALMTC_BAT_MAX_CHARGE 1 /* unknown */
#define PALMTC_BAT_MIN_CHARGE 1 /* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmte2.h b/arch/arm/mach-pxa/include/mach/palmte2.h
index 1236134..f89e989 100644
--- a/arch/arm/mach-pxa/include/mach/palmte2.h
+++ b/arch/arm/mach-pxa/include/mach/palmte2.h
@@ -59,7 +59,7 @@
/* BATTERY */
#define PALMTE2_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */
#define PALMTE2_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */
-#define PALMTE2_BAT_MAX_CURRENT 0 /* unknokn */
+#define PALMTE2_BAT_MAX_CURRENT 0 /* unknown */
#define PALMTE2_BAT_MIN_CURRENT 0 /* unknown */
#define PALMTE2_BAT_MAX_CHARGE 1 /* unknown */
#define PALMTE2_BAT_MIN_CHARGE 1 /* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index 1be0db6..10abc4f 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -94,7 +94,7 @@
/* BATTERY */
#define PALMTX_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */
#define PALMTX_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */
-#define PALMTX_BAT_MAX_CURRENT 0 /* unknokn */
+#define PALMTX_BAT_MAX_CURRENT 0 /* unknown */
#define PALMTX_BAT_MIN_CURRENT 0 /* unknown */
#define PALMTX_BAT_MAX_CHARGE 1 /* unknown */
#define PALMTX_BAT_MIN_CHARGE 1 /* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h
index 2806ef6..2bbcf70 100644
--- a/arch/arm/mach-pxa/include/mach/palmz72.h
+++ b/arch/arm/mach-pxa/include/mach/palmz72.h
@@ -49,7 +49,7 @@
/* Battery */
#define PALMZ72_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */
#define PALMZ72_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */
-#define PALMZ72_BAT_MAX_CURRENT 0 /* unknokn */
+#define PALMZ72_BAT_MAX_CURRENT 0 /* unknown */
#define PALMZ72_BAT_MIN_CURRENT 0 /* unknown */
#define PALMZ72_BAT_MAX_CHARGE 1 /* unknown */
#define PALMZ72_BAT_MIN_CHARGE 1 /* unknown */
diff --git a/arch/arm/mach-s3c2400/Kconfig b/arch/arm/mach-s3c2400/Kconfig
index deab0722..fdd8f5e 100644
--- a/arch/arm/mach-s3c2400/Kconfig
+++ b/arch/arm/mach-s3c2400/Kconfig
@@ -1,13 +1,7 @@
-# arch/arm/mach-s3c2400/Kconfig
-#
# Copyright 2007 Simtec Electronics
#
# Licensed under GPLv2
-
-
menu "S3C2400 Machines"
-
endmenu
-
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index dd1fcc7..5547318 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c2410/Kconfig
-#
# Copyright 2007 Simtec Electronics
#
# Licensed under GPLv2
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index c2bdc46..9a8c065 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c2412/Kconfig
-#
# Copyright 2007 Simtec Electronics
#
# Licensed under GPLv2
@@ -90,6 +88,4 @@ config MACH_VSTMS
help
Say Y here if you are using an VSTMS board
-
endmenu
-
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index cf10e14..8087935 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c2440/Kconfig
-#
# Copyright 2007 Simtec Electronics
#
# Licensed under GPLv2
@@ -122,4 +120,3 @@ config MACH_MINI2440
available via various sources. It can come with a 3.5" or 7" touch LCD.
endmenu
-
diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
index 103e913..8d38118 100644
--- a/arch/arm/mach-s3c2442/Kconfig
+++ b/arch/arm/mach-s3c2442/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c2442/Kconfig
-#
# Copyright 2007 Simtec Electronics
#
# Licensed under GPLv2
@@ -36,6 +34,4 @@ config MACH_NEO1973_GTA02
help
Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
-
endmenu
-
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index 212141b..4314c44 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c2443/Kconfig
-#
# Copyright 2007 Simtec Electronics
#
# Licensed under GPLv2
diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig
index 770b720..a250bf6 100644
--- a/arch/arm/mach-s3c6400/Kconfig
+++ b/arch/arm/mach-s3c6400/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c6400/Kconfig
-#
# Copyright 2008 Openmoko, Inc.
# Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
#
diff --git a/arch/arm/mach-s3c6400/setup-sdhci.c b/arch/arm/mach-s3c6400/setup-sdhci.c
index b93dafb..1039937 100644
--- a/arch/arm/mach-s3c6400/setup-sdhci.c
+++ b/arch/arm/mach-s3c6400/setup-sdhci.c
@@ -30,7 +30,7 @@ char *s3c6400_hsmmc_clksrcs[4] = {
[0] = "hsmmc",
[1] = "hsmmc",
[2] = "mmc_bus",
- /* [3] = "48m", - note not succesfully used yet */
+ /* [3] = "48m", - note not successfully used yet */
};
void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index 72d4b11..162f456 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c6410/Kconfig
-#
# Copyright 2008 Openmoko, Inc.
# Copyright 2008 Simtec Electronics
#
diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c
index 20666f3..816d2d9 100644
--- a/arch/arm/mach-s3c6410/setup-sdhci.c
+++ b/arch/arm/mach-s3c6410/setup-sdhci.c
@@ -30,7 +30,7 @@ char *s3c6410_hsmmc_clksrcs[4] = {
[0] = "hsmmc",
[1] = "hsmmc",
[2] = "mmc_bus",
- /* [3] = "48m", - note not succesfully used yet */
+ /* [3] = "48m", - note not successfully used yet */
};
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index 0dd2b8c..27ec167 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s5pc100/Kconfig
-#
# Copyright 2009 Samsung Electronics Co.
# Byungho Min <bhmin@samsung.com>
#
diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c
index cb4521a..ad66035 100644
--- a/arch/arm/mach-sa1100/dma.c
+++ b/arch/arm/mach-sa1100/dma.c
@@ -65,7 +65,7 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id)
/**
- * sa1100_request_dma - allocate one of the SA11x0's DMA chanels
+ * sa1100_request_dma - allocate one of the SA11x0's DMA channels
* @device: The SA11x0 peripheral targeted by this request
* @device_id: An ascii name for the claiming device
* @callback: Function to be called when the DMA completes
diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h
index 88333df..56721a0 100644
--- a/arch/arm/mach-u300/include/mach/u300-regs.h
+++ b/arch/arm/mach-u300/include/mach/u300-regs.h
@@ -6,7 +6,7 @@
* Copyright (C) 2006-2009 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* Basic register address definitions in physical memory and
- * some block defintions for core devices like the timer.
+ * some block definitions for core devices like the timer.
* Author: Linus Walleij <linus.walleij@stericsson.com>
*/
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index eaabd4e..e1fc6da 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -112,7 +112,7 @@ enum iomux_gp_func {
* setups a single pin:
* - reserves the pin so that it is not claimed by another driver
* - setups the iomux according to the configuration
- * - if the pin is configured as a GPIO, we claim it throug kernel gpiolib
+ * - if the pin is configured as a GPIO, we claim it through kernel gpiolib
*/
int mxc_iomux_alloc_pin(const unsigned int pin, const char *label);
/*
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
index 9f13061..3887f3f 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
@@ -48,7 +48,7 @@
* setups a single pin:
* - reserves the pin so that it is not claimed by another driver
* - setups the iomux according to the configuration
- * - if the pin is configured as a GPIO, we claim it throug kernel gpiolib
+ * - if the pin is configured as a GPIO, we claim it through kernel gpiolib
*/
int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label);
/*
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 5cdbd60..4ff6dfe 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -94,7 +94,7 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
* register to follow the ratio of duty_ns vs. period_ns
* accordingly.
*
- * This is good enought for programming the brightness of
+ * This is good enough for programming the brightness of
* the LCD backlight.
*
* The real implementation would divide PERCLK[0] first by
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index be4ce07..d17375e 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1252,7 +1252,7 @@ static void create_dma_lch_chain(int lch_head, int lch_queue)
* OMAP_DMA_DYNAMIC_CHAIN
* @params - Channel parameters
*
- * @return - Succes : 0
+ * @return - Success : 0
* Failure: -EINVAL/-ENOMEM
*/
int omap_request_dma_chain(int dev_id, const char *dev_name,
diff --git a/arch/arm/plat-omap/include/plat/omap16xx.h b/arch/arm/plat-omap/include/plat/omap16xx.h
index 0e69b50..7560b4d 100644
--- a/arch/arm/plat-omap/include/plat/omap16xx.h
+++ b/arch/arm/plat-omap/include/plat/omap16xx.h
@@ -124,7 +124,7 @@
#define TIPB_SWITCH_BASE (0xfffbc800)
#define OMAP16XX_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_BASE + 0x160)
-/* UART3 Registers Maping through MPU bus */
+/* UART3 Registers Mapping through MPU bus */
#define UART3_RHR (OMAP_UART3_BASE + 0)
#define UART3_THR (OMAP_UART3_BASE + 0)
#define UART3_DLL (OMAP_UART3_BASE + 0)
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index e139a72..9e9d028 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/plat-s3c/Kconfig
-#
# Copyright 2007 Simtec Electronics
#
# Licensed under GPLv2
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 20fbf93..342647e 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/plat-s3c24xx/Kconfig
-#
# Copyright 2007 Simtec Electronics
#
# Licensed under GPLv2
diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h
index c4d1334..bd534d3 100644
--- a/arch/arm/plat-s3c24xx/include/plat/map.h
+++ b/arch/arm/plat-s3c24xx/include/plat/map.h
@@ -64,7 +64,7 @@
/* the calculation for the VA of this must ensure that
* it is the same distance apart from the UART in the
* phsyical address space, as the initial mapping for the IO
- * is done as a 1:1 maping. This puts it (currently) at
+ * is done as a 1:1 mapping. This puts it (currently) at
* 0xFA800000, which is not in the way of any current mapping
* by the base system.
*/
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
index bcfa778..e6da87a 100644
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ b/arch/arm/plat-s3c64xx/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/plat-s3c64xx/Kconfig
-#
# Copyright 2008 Openmoko, Inc.
# Copyright 2008 Simtec Electronics
# Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
index 1608e62..b7b9e91 100644
--- a/arch/arm/plat-s5pc1xx/Kconfig
+++ b/arch/arm/plat-s5pc1xx/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/plat-s5pc1xx/Kconfig
-#
# Copyright 2009 Samsung Electronics Co.
# Byungho Min <bhmin@samsung.com>
#
diff --git a/arch/avr32/boards/hammerhead/Kconfig b/arch/avr32/boards/hammerhead/Kconfig
index fda2331..5c13d78 100644
--- a/arch/avr32/boards/hammerhead/Kconfig
+++ b/arch/avr32/boards/hammerhead/Kconfig
@@ -24,7 +24,7 @@ config BOARD_HAMMERHEAD_SND
bool "Atmel AC97 Sound support"
help
This enables Sound support for the Hammerhead board. You may
- also go trough the ALSA settings to get it working.
+ also go through the ALSA settings to get it working.
Choose 'Y' here if you have ordered a Corona daugther board and
want to make your board funky.
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 6b7325d..78cb3d3 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -619,7 +619,7 @@ asmlinkage notrace void trap_c(struct pt_regs *fp)
/*
* Similar to get_user, do some address checking, then dereference
- * Return true on sucess, false on bad address
+ * Return true on success, false on bad address
*/
static bool get_instruction(unsigned short *val, unsigned short *address)
{
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
index e06f411..f9fd2b2 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
@@ -542,7 +542,7 @@
#define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */
#define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */
#define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */
-#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */
+#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshold Register */
#define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */
#define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */
#define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */
@@ -550,7 +550,7 @@
#define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */
#define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */
#define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */
-#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */
+#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshold Register */
#define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */
#define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */
#define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
index f821700..b9dbb73 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
@@ -544,7 +544,7 @@
#define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */
#define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */
#define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */
-#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */
+#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshold Register */
#define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */
#define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */
#define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */
@@ -552,7 +552,7 @@
#define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */
#define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */
#define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */
-#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */
+#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshold Register */
#define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */
#define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */
#define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */
diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h
index cebb14f..a6d20ca 100644
--- a/arch/blackfin/mach-bf537/include/mach/defBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h
@@ -934,7 +934,7 @@
#define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */
#define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */
#define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */
-#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */
+#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshold Register */
#define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */
#define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */
#define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */
@@ -942,7 +942,7 @@
#define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */
#define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */
#define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */
-#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */
+#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshold Register */
#define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */
#define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */
#define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h
index dd414ae..39f588d 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF544.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h
@@ -491,7 +491,7 @@
#define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */
#define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */
#define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */
-#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */
+#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */
#define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
#define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */
#define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */
@@ -501,7 +501,7 @@
#define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */
#define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */
#define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */
-#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */
+#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */
#define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
#define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */
#define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h
index 5a9dbab..c4dcf30 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF547.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h
@@ -470,7 +470,7 @@
#define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */
#define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */
#define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */
-#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */
+#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */
#define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
#define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */
#define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */
@@ -480,7 +480,7 @@
#define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */
#define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */
#define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */
-#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */
+#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */
#define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
#define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */
#define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF548.h b/arch/blackfin/mach-bf548/include/mach/defBF548.h
index 82cd593..a507998 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF548.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF548.h
@@ -853,7 +853,7 @@
#define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */
#define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */
#define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */
-#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */
+#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */
#define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
#define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */
#define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */
@@ -863,7 +863,7 @@
#define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */
#define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */
#define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */
-#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */
+#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */
#define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
#define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */
#define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF549.h b/arch/blackfin/mach-bf548/include/mach/defBF549.h
index 6fc6e39..f7f0435 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF549.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF549.h
@@ -1024,7 +1024,7 @@
#define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */
#define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */
#define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */
-#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */
+#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */
#define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
#define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */
#define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */
@@ -1034,7 +1034,7 @@
#define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */
#define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */
#define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */
-#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */
+#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */
#define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
#define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */
#define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */
diff --git a/arch/cris/arch-v10/mm/fault.c b/arch/cris/arch-v10/mm/fault.c
index 087a209..ed60588 100644
--- a/arch/cris/arch-v10/mm/fault.c
+++ b/arch/cris/arch-v10/mm/fault.c
@@ -80,8 +80,7 @@ handle_mmu_bus_fault(struct pt_regs *regs)
* do_page_fault may have flushed the TLB so we have to restore
* the MMU registers.
*/
- local_save_flags(flags);
- local_irq_disable();
+ local_irq_save(flags);
pmd = (pmd_t *)(pgd + pgd_index(address));
if (pmd_none(*pmd))
goto exit;
diff --git a/arch/cris/arch-v10/mm/tlb.c b/arch/cris/arch-v10/mm/tlb.c
index 4a496e4..21d78c5 100644
--- a/arch/cris/arch-v10/mm/tlb.c
+++ b/arch/cris/arch-v10/mm/tlb.c
@@ -134,28 +134,6 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
local_irq_restore(flags);
}
-/* dump the entire TLB for debug purposes */
-
-#if 0
-void
-dump_tlb_all(void)
-{
- int i;
- unsigned long flags;
-
- printk("TLB dump. LO is: pfn | reserved | global | valid | kernel | we |\n");
-
- local_save_flags(flags);
- local_irq_disable();
- for(i = 0; i < NUM_TLB_ENTRIES; i++) {
- *R_TLB_SELECT = ( IO_FIELD(R_TLB_SELECT, index, i) );
- printk("Entry %d: HI 0x%08lx, LO 0x%08lx\n",
- i, *R_TLB_HI, *R_TLB_LO);
- }
- local_irq_restore(flags);
-}
-#endif
-
/*
* Initialize the context related info for a new mm_struct
* instance.
diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c
index 4a7cdd9..380df1a 100644
--- a/arch/cris/mm/fault.c
+++ b/arch/cris/mm/fault.c
@@ -209,7 +209,7 @@ do_page_fault(unsigned long address, struct pt_regs *regs,
/* Are we prepared to handle this kernel fault?
*
* (The kernel has valid exception-points in the source
- * when it acesses user-memory. When it fails in one
+ * when it accesses user-memory. When it fails in one
* of those points, we find it in a table and do a jump
* to some fixup code that loads an appropriate error
* code)
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index 674a837..f332e3f 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -1381,7 +1381,7 @@ sba_coalesce_chunks(struct ioc *ioc, struct device *dev,
#endif
/*
- ** Not virtually contigous.
+ ** Not virtually contiguous.
** Terminate prev chunk.
** Start a new chunk.
**
diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S
index 10c3751..2fd7479 100644
--- a/arch/ia64/ia32/ia32_entry.S
+++ b/arch/ia64/ia32/ia32_entry.S
@@ -79,7 +79,7 @@ GLOBAL_ENTRY(ia32_ret_from_clone)
(p6) br.cond.spnt .ia32_strace_check_retval
;; // prevent RAW on r8
END(ia32_ret_from_clone)
- // fall thrugh
+ // fall through
GLOBAL_ENTRY(ia32_ret_from_syscall)
PT_REGS_UNWIND_INFO(0)
diff --git a/arch/ia64/include/asm/perfmon_default_smpl.h b/arch/ia64/include/asm/perfmon_default_smpl.h
index 48822c0..74724b2 100644
--- a/arch/ia64/include/asm/perfmon_default_smpl.h
+++ b/arch/ia64/include/asm/perfmon_default_smpl.h
@@ -67,7 +67,7 @@ typedef struct {
unsigned long ip; /* where did the overflow interrupt happened */
unsigned long tstamp; /* ar.itc when entering perfmon intr. handler */
- unsigned short cpu; /* cpu on which the overfow occured */
+ unsigned short cpu; /* cpu on which the overflow occured */
unsigned short set; /* event set active when overflow ocurred */
int tgid; /* thread group id (for NPTL, this is getpid()) */
} pfm_default_smpl_entry_t;
diff --git a/arch/ia64/include/asm/sn/shubio.h b/arch/ia64/include/asm/sn/shubio.h
index 22a6f18..6052422 100644
--- a/arch/ia64/include/asm/sn/shubio.h
+++ b/arch/ia64/include/asm/sn/shubio.h
@@ -3289,7 +3289,7 @@ typedef ii_icrb0_e_u_t icrbe_t;
#define IIO_IIDSR_LVL_SHIFT 0
#define IIO_IIDSR_LVL_MASK 0x000000ff
-/* Xtalk timeout threshhold register (IIO_IXTT) */
+/* Xtalk timeout threshold register (IIO_IXTT) */
#define IXTT_RRSP_TO_SHFT 55 /* read response timeout */
#define IXTT_RRSP_TO_MASK (0x1FULL << IXTT_RRSP_TO_SHFT)
#define IXTT_RRSP_PS_SHFT 32 /* read responsed TO prescalar */
diff --git a/arch/ia64/kernel/esi.c b/arch/ia64/kernel/esi.c
index d5764a3..b091111 100644
--- a/arch/ia64/kernel/esi.c
+++ b/arch/ia64/kernel/esi.c
@@ -84,7 +84,7 @@ static int __init esi_init (void)
case ESI_DESC_ENTRY_POINT:
break;
default:
- printk(KERN_WARNING "Unkown table type %d found in "
+ printk(KERN_WARNING "Unknown table type %d found in "
"ESI table, ignoring rest of table\n", *p);
return -ENODEV;
}
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 402698b..599b233 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -3517,7 +3517,7 @@ pfm_use_debug_registers(struct task_struct *task)
* IA64_THREAD_DBG_VALID set. This indicates a task which was
* able to use the debug registers for debugging purposes via
* ptrace(). Therefore we know it was not using them for
- * perfmormance monitoring, so we only decrement the number
+ * performance monitoring, so we only decrement the number
* of "ptraced" debug register users to keep the count up to date
*/
int
diff --git a/arch/m68k/ifpsp060/src/fpsp.S b/arch/m68k/ifpsp060/src/fpsp.S
index 6c1a9a2..73613b5 100644
--- a/arch/m68k/ifpsp060/src/fpsp.S
+++ b/arch/m68k/ifpsp060/src/fpsp.S
@@ -753,7 +753,7 @@ fovfl_ovfl_on:
bra.l _real_ovfl
-# overflow occurred but is disabled. meanwhile, inexact is enabled. therefore,
+# overflow occurred but is disabled. meanwhile, inexact is enabled. Therefore,
# we must jump to real_inex().
fovfl_inex_on:
@@ -1015,7 +1015,7 @@ funfl_unfl_on2:
bra.l _real_unfl
-# undeflow occurred but is disabled. meanwhile, inexact is enabled. therefore,
+# underflow occurred but is disabled. meanwhile, inexact is enabled. Therefore,
# we must jump to real_inex().
funfl_inex_on:
@@ -2963,7 +2963,7 @@ iea_disabled:
tst.w %d0 # is instr fmovm?
bmi.b iea_dis_fmovm # yes
-# instruction is using an extended precision immediate operand. therefore,
+# instruction is using an extended precision immediate operand. Therefore,
# the total instruction length is 16 bytes.
iea_dis_immed:
mov.l &0x10,%d0 # 16 bytes of instruction
@@ -9624,7 +9624,7 @@ sok_dnrm:
bge.b sok_norm2 # thank goodness no
# the multiply factor that we're trying to create should be a denorm
-# for the multiply to work. therefore, we're going to actually do a
+# for the multiply to work. Therefore, we're going to actually do a
# multiply with a denorm which will cause an unimplemented data type
# exception to be put into the machine which will be caught and corrected
# later. we don't do this with the DENORMs above because this method
@@ -12216,7 +12216,7 @@ fin_sd_unfl_dis:
#
# operand will underflow AND underflow or inexact is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
#
fin_sd_unfl_ena:
mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -12746,7 +12746,7 @@ fdiv_zero_load_p:
#
# The destination was In Range and the source was a ZERO. The result,
-# therefore, is an INF w/ the proper sign.
+# Therefore, is an INF w/ the proper sign.
# So, determine the sign and return a new INF (w/ the j-bit cleared).
#
global fdiv_inf_load # global for fsgldiv
@@ -12996,7 +12996,7 @@ fneg_sd_unfl_dis:
#
# operand will underflow AND underflow is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
#
fneg_sd_unfl_ena:
mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -13611,7 +13611,7 @@ fabs_sd_unfl_dis:
#
# operand will underflow AND underflow is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
#
fabs_sd_unfl_ena:
mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -14973,7 +14973,7 @@ fadd_zero_2:
#
# the ZEROes have opposite signs:
-# - therefore, we return +ZERO if the rounding modes are RN,RZ, or RP.
+# - Therefore, we return +ZERO if the rounding modes are RN,RZ, or RP.
# - -ZERO is returned in the case of RM.
#
fadd_zero_2_chk_rm:
@@ -15425,7 +15425,7 @@ fsub_zero_2:
#
# the ZEROes have the same signs:
-# - therefore, we return +ZERO if the rounding mode is RN,RZ, or RP
+# - Therefore, we return +ZERO if the rounding mode is RN,RZ, or RP
# - -ZERO is returned in the case of RM.
#
fsub_zero_2_chk_rm:
@@ -15693,7 +15693,7 @@ fsqrt_sd_unfl_dis:
#
# operand will underflow AND underflow is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
#
fsqrt_sd_unfl_ena:
mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -21000,7 +21000,7 @@ fout_pack_type:
tst.l %d0
bne.b fout_pack_set
# "mantissa" is all zero which means that the answer is zero. but, the '040
-# algorithm allows the exponent to be non-zero. the 881/2 do not. therefore,
+# algorithm allows the exponent to be non-zero. the 881/2 do not. Therefore,
# if the mantissa is zero, I will zero the exponent, too.
# the question now is whether the exponents sign bit is allowed to be non-zero
# for a zero, also...
@@ -21743,7 +21743,7 @@ denorm_set_stky:
rts
# #
-# dnrm_lp(): normalize exponent/mantissa to specified threshhold #
+# dnrm_lp(): normalize exponent/mantissa to specified threshold #
# #
# INPUT: #
# %a0 : points to the operand to be denormalized #
@@ -22402,7 +22402,7 @@ unnorm_shift:
bgt.b unnorm_nrm_zero # yes; denorm only until exp = 0
#
-# exponent would not go < 0. therefore, number stays normalized
+# exponent would not go < 0. Therefore, number stays normalized
#
sub.w %d0, %d1 # shift exponent value
mov.w FTEMP_EX(%a0), %d0 # load old exponent
diff --git a/arch/m68k/ifpsp060/src/pfpsp.S b/arch/m68k/ifpsp060/src/pfpsp.S
index 51b9f7d..e71ba0a 100644
--- a/arch/m68k/ifpsp060/src/pfpsp.S
+++ b/arch/m68k/ifpsp060/src/pfpsp.S
@@ -752,7 +752,7 @@ fovfl_ovfl_on:
bra.l _real_ovfl
-# overflow occurred but is disabled. meanwhile, inexact is enabled. therefore,
+# overflow occurred but is disabled. meanwhile, inexact is enabled. Therefore,
# we must jump to real_inex().
fovfl_inex_on:
@@ -1014,7 +1014,7 @@ funfl_unfl_on2:
bra.l _real_unfl
-# undeflow occurred but is disabled. meanwhile, inexact is enabled. therefore,
+# underflow occurred but is disabled. meanwhile, inexact is enabled. Therefore,
# we must jump to real_inex().
funfl_inex_on:
@@ -2962,7 +2962,7 @@ iea_disabled:
tst.w %d0 # is instr fmovm?
bmi.b iea_dis_fmovm # yes
-# instruction is using an extended precision immediate operand. therefore,
+# instruction is using an extended precision immediate operand. Therefore,
# the total instruction length is 16 bytes.
iea_dis_immed:
mov.l &0x10,%d0 # 16 bytes of instruction
@@ -5865,7 +5865,7 @@ denorm_set_stky:
rts
# #
-# dnrm_lp(): normalize exponent/mantissa to specified threshhold #
+# dnrm_lp(): normalize exponent/mantissa to specified threshold #
# #
# INPUT: #
# %a0 : points to the operand to be denormalized #
@@ -6524,7 +6524,7 @@ unnorm_shift:
bgt.b unnorm_nrm_zero # yes; denorm only until exp = 0
#
-# exponent would not go < 0. therefore, number stays normalized
+# exponent would not go < 0. Therefore, number stays normalized
#
sub.w %d0, %d1 # shift exponent value
mov.w FTEMP_EX(%a0), %d0 # load old exponent
@@ -7901,7 +7901,7 @@ fout_pack_type:
tst.l %d0
bne.b fout_pack_set
# "mantissa" is all zero which means that the answer is zero. but, the '040
-# algorithm allows the exponent to be non-zero. the 881/2 do not. therefore,
+# algorithm allows the exponent to be non-zero. the 881/2 do not. Therefore,
# if the mantissa is zero, I will zero the exponent, too.
# the question now is whether the exponents sign bit is allowed to be non-zero
# for a zero, also...
@@ -8647,7 +8647,7 @@ fin_sd_unfl_dis:
#
# operand will underflow AND underflow or inexact is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
#
fin_sd_unfl_ena:
mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -9177,7 +9177,7 @@ fdiv_zero_load_p:
#
# The destination was In Range and the source was a ZERO. The result,
-# therefore, is an INF w/ the proper sign.
+# Therefore, is an INF w/ the proper sign.
# So, determine the sign and return a new INF (w/ the j-bit cleared).
#
global fdiv_inf_load # global for fsgldiv
@@ -9427,7 +9427,7 @@ fneg_sd_unfl_dis:
#
# operand will underflow AND underflow is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
#
fneg_sd_unfl_ena:
mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -10042,7 +10042,7 @@ fabs_sd_unfl_dis:
#
# operand will underflow AND underflow is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
#
fabs_sd_unfl_ena:
mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -11404,7 +11404,7 @@ fadd_zero_2:
#
# the ZEROes have opposite signs:
-# - therefore, we return +ZERO if the rounding modes are RN,RZ, or RP.
+# - Therefore, we return +ZERO if the rounding modes are RN,RZ, or RP.
# - -ZERO is returned in the case of RM.
#
fadd_zero_2_chk_rm:
@@ -11856,7 +11856,7 @@ fsub_zero_2:
#
# the ZEROes have the same signs:
-# - therefore, we return +ZERO if the rounding mode is RN,RZ, or RP
+# - Therefore, we return +ZERO if the rounding mode is RN,RZ, or RP
# - -ZERO is returned in the case of RM.
#
fsub_zero_2_chk_rm:
@@ -12124,7 +12124,7 @@ fsqrt_sd_unfl_dis:
#
# operand will underflow AND underflow is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
#
fsqrt_sd_unfl_ena:
mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
diff --git a/arch/m68k/include/asm/bootinfo.h b/arch/m68k/include/asm/bootinfo.h
index fb8a06b..67e7a78 100644
--- a/arch/m68k/include/asm/bootinfo.h
+++ b/arch/m68k/include/asm/bootinfo.h
@@ -145,7 +145,7 @@ struct bi_record {
/*
* Macintosh hardware profile data - unused, see macintosh.h for
- * resonable type values
+ * reasonable type values
*/
#define BI_MAC_VIA1BASE 0x8010 /* Mac VIA1 base address (always present) */
diff --git a/arch/microblaze/lib/memcpy.c b/arch/microblaze/lib/memcpy.c
index 6a907c5..cc2108b 100644
--- a/arch/microblaze/lib/memcpy.c
+++ b/arch/microblaze/lib/memcpy.c
@@ -9,7 +9,7 @@
* It is based on demo code originally Copyright 2001 by Intel Corp, taken from
* http://www.embedded.com/showArticle.jhtml?articleID=19205567
*
- * Attempts were made, unsuccesfully, to contact the original
+ * Attempts were made, unsuccessfully, to contact the original
* author of this code (Michael Morrow, Intel). Below is the original
* copyright notice.
*
diff --git a/arch/microblaze/lib/memmove.c b/arch/microblaze/lib/memmove.c
index d4e9f49..0929198 100644
--- a/arch/microblaze/lib/memmove.c
+++ b/arch/microblaze/lib/memmove.c
@@ -9,7 +9,7 @@
* It is based on demo code originally Copyright 2001 by Intel Corp, taken from
* http://www.embedded.com/showArticle.jhtml?articleID=19205567
*
- * Attempts were made, unsuccesfully, to contact the original
+ * Attempts were made, unsuccessfully, to contact the original
* author of this code (Michael Morrow, Intel). Below is the original
* copyright notice.
*
diff --git a/arch/microblaze/lib/memset.c b/arch/microblaze/lib/memset.c
index 941dc8f..4df851d 100644
--- a/arch/microblaze/lib/memset.c
+++ b/arch/microblaze/lib/memset.c
@@ -9,7 +9,7 @@
* It is based on demo code originally Copyright 2001 by Intel Corp, taken from
* http://www.embedded.com/showArticle.jhtml?articleID=19205567
*
- * Attempts were made, unsuccesfully, to contact the original
+ * Attempts were made, unsuccessfully, to contact the original
* author of this code (Michael Morrow, Intel). Below is the original
* copyright notice.
*
diff --git a/arch/mips/include/asm/mach-pnx833x/gpio.h b/arch/mips/include/asm/mach-pnx833x/gpio.h
index 8de0eb9..ed3a88d 100644
--- a/arch/mips/include/asm/mach-pnx833x/gpio.h
+++ b/arch/mips/include/asm/mach-pnx833x/gpio.h
@@ -24,7 +24,7 @@
/* BIG FAT WARNING: races danger!
No protections exist here. Current users are only early init code,
- when locking is not needed because no cuncurency yet exists there,
+ when locking is not needed because no concurrency yet exists there,
and GPIO IRQ dispatcher, which does locking.
However, if many uses will ever happen, proper locking will be needed
- including locking between different uses
diff --git a/arch/mips/include/asm/sgi/ioc.h b/arch/mips/include/asm/sgi/ioc.h
index 343ed15..57a9719 100644
--- a/arch/mips/include/asm/sgi/ioc.h
+++ b/arch/mips/include/asm/sgi/ioc.h
@@ -164,7 +164,7 @@ struct sgioc_regs {
u32 _unused5;
u8 _write[3];
volatile u8 write;
-#define SGIOC_WRITE_NTHRESH 0x01 /* use 4.5db threshhold */
+#define SGIOC_WRITE_NTHRESH 0x01 /* use 4.5db threshold */
#define SGIOC_WRITE_TPSPEED 0x02 /* use 100ohm TP speed */
#define SGIOC_WRITE_EPSEL 0x04 /* force cable mode: 1=AUI 0=TP */
#define SGIOC_WRITE_EASEL 0x08 /* 1=autoselect 0=manual cable selection */
diff --git a/arch/mips/include/asm/sibyte/sb1250_mac.h b/arch/mips/include/asm/sibyte/sb1250_mac.h
index b6faf08..591b906 100644
--- a/arch/mips/include/asm/sibyte/sb1250_mac.h
+++ b/arch/mips/include/asm/sibyte/sb1250_mac.h
@@ -212,7 +212,7 @@
#define G_MAC_TXD_WEIGHT1(x) _SB_GETVALUE(x, S_MAC_TXD_WEIGHT1, M_MAC_TXD_WEIGHT1)
/*
- * MAC Fifo Threshhold registers (Table 9-14)
+ * MAC Fifo Threshold registers (Table 9-14)
* Register: MAC_THRSH_CFG_0
* Register: MAC_THRSH_CFG_1
* Register: MAC_THRSH_CFG_2
diff --git a/arch/mips/include/asm/sn/sn0/hubio.h b/arch/mips/include/asm/sn/sn0/hubio.h
index d0c29d4..31c76c0 100644
--- a/arch/mips/include/asm/sn/sn0/hubio.h
+++ b/arch/mips/include/asm/sn/sn0/hubio.h
@@ -825,7 +825,7 @@ typedef union iprb_u {
struct {
u64 rsvd1: 15,
error: 1, /* Widget rcvd wr resp pkt w/ error */
- ovflow: 5, /* Over flow count. perf measurement */
+ ovflow: 5, /* Overflow count. perf measurement */
fire_and_forget: 1, /* Launch Write without response */
mode: 2, /* Widget operation Mode */
rsvd2: 2,
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 24630fd..a38e3ee 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -1331,7 +1331,7 @@ void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu)
if (!((asid += ASID_INC) & ASID_MASK) ) {
if (cpu_has_vtag_icache)
flush_icache_all();
- /* Traverse all online CPUs (hack requires contigous range) */
+ /* Traverse all online CPUs (hack requires contiguous range) */
for_each_online_cpu(i) {
/*
* We don't need to worry about our own CPU, nor those of
diff --git a/arch/mips/math-emu/dp_sub.c b/arch/mips/math-emu/dp_sub.c
index b30c5b1..a2127d6 100644
--- a/arch/mips/math-emu/dp_sub.c
+++ b/arch/mips/math-emu/dp_sub.c
@@ -110,7 +110,7 @@ ieee754dp ieee754dp_sub(ieee754dp x, ieee754dp y)
case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM):
DPDNORMX;
- /* FAAL THOROUGH */
+ /* FALL THROUGH */
case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM):
/* normalize ym,ye */
diff --git a/arch/mips/txx9/generic/smsc_fdc37m81x.c b/arch/mips/txx9/generic/smsc_fdc37m81x.c
index a2b2d62..8ebc384 100644
--- a/arch/mips/txx9/generic/smsc_fdc37m81x.c
+++ b/arch/mips/txx9/generic/smsc_fdc37m81x.c
@@ -117,7 +117,7 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port)
if (chip_id == SMSC_FDC37M81X_CHIP_ID)
smsc_fdc37m81x_config_end();
else {
- printk(KERN_WARNING "%s: unknow chip id 0x%02x\n", __func__,
+ printk(KERN_WARNING "%s: unknown chip id 0x%02x\n", __func__,
chip_id);
g_smsc_fdc37m81x_base = 0;
}
diff --git a/arch/parisc/kernel/perf.c b/arch/parisc/kernel/perf.c
index 75099ef..f9f6783 100644
--- a/arch/parisc/kernel/perf.c
+++ b/arch/parisc/kernel/perf.c
@@ -24,7 +24,7 @@
*
* This driver programs the PCX-U/PCX-W performance counters
* on the PA-RISC 2.0 chips. The driver keeps all images now
- * internally to the kernel to hopefully eliminate the possiblity
+ * internally to the kernel to hopefully eliminate the possibility
* of a bad image halting the CPU. Also, there are different
* images for the PCX-W and later chips vs the PCX-U chips.
*
diff --git a/arch/powerpc/include/asm/reg_fsl_emb.h b/arch/powerpc/include/asm/reg_fsl_emb.h
index 1e180a5..0de404d 100644
--- a/arch/powerpc/include/asm/reg_fsl_emb.h
+++ b/arch/powerpc/include/asm/reg_fsl_emb.h
@@ -39,7 +39,7 @@
#define PMRN_PMLCB2 0x112 /* PM Local Control B2 */
#define PMRN_PMLCB3 0x113 /* PM Local Control B3 */
-#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshhold Multiple Field */
+#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshold Multiple Field */
#define PMLCB_THRESHMUL_SHIFT 8
#define PMLCB_THRESHOLD_MASK 0x003f /* Threshold Field */
diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
index 641c74b..b6bd1ea 100644
--- a/arch/powerpc/kernel/kgdb.c
+++ b/arch/powerpc/kernel/kgdb.c
@@ -52,7 +52,7 @@ static struct hard_trap_info
{ 0x2030, 0x08 /* SIGFPE */ }, /* spe fp data */
{ 0x2040, 0x08 /* SIGFPE */ }, /* spe fp data */
{ 0x2050, 0x08 /* SIGFPE */ }, /* spe fp round */
- { 0x2060, 0x0e /* SIGILL */ }, /* performace monitor */
+ { 0x2060, 0x0e /* SIGILL */ }, /* performance monitor */
{ 0x2900, 0x08 /* SIGFPE */ }, /* apu unavailable */
{ 0x3100, 0x0e /* SIGALRM */ }, /* fixed interval timer */
{ 0x3200, 0x02 /* SIGINT */ }, /* watchdog */
diff --git a/arch/powerpc/kernel/tau_6xx.c b/arch/powerpc/kernel/tau_6xx.c
index c3a56d6..a753b72 100644
--- a/arch/powerpc/kernel/tau_6xx.c
+++ b/arch/powerpc/kernel/tau_6xx.c
@@ -59,7 +59,7 @@ void set_thresholds(unsigned long cpu)
mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | THRM1_TIE | THRM1_TID);
/* setup THRM2,
- * threshold, valid bit, enable interrupts, interrupt when above threshhold
+ * threshold, valid bit, enable interrupts, interrupt when above threshold
*/
mtspr (SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V | THRM1_TIE);
#else
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index 137dc22..d84d192 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -721,7 +721,7 @@ static int __init vdso_init(void)
#ifdef CONFIG_PPC64
/*
- * Fill up the "systemcfg" stuff for backward compatiblity
+ * Fill up the "systemcfg" stuff for backward compatibility
*/
strcpy((char *)vdso_data->eye_catcher, "SYSTEMCFG:PPC64");
vdso_data->version.major = SYSTEMCFG_MAJOR;
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index ae06c62..2c9e522 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -248,7 +248,7 @@ static int pm_rtas_activate_signals(u32 node, u32 count)
* There is no debug setup required for the cycles event.
* Note that only events in the same group can be used.
* Otherwise, there will be conflicts in correctly routing
- * the signals on the debug bus. It is the responsiblity
+ * the signals on the debug bus. It is the responsibility
* of the OProfile user tool to check the events are in
* the same group.
*/
@@ -1594,7 +1594,7 @@ static void cell_handle_interrupt_spu(struct pt_regs *regs,
* to a latch. The new values (interrupt setting bits, reset
* counter value etc.) are not copied to the actual registers
* until the performance monitor is enabled. In order to get
- * this to work as desired, the permormance monitor needs to
+ * this to work as desired, the performance monitor needs to
* be disabled while writing to the latches. This is a
* HW design issue.
*/
@@ -1668,7 +1668,7 @@ static void cell_handle_interrupt_ppu(struct pt_regs *regs,
* to a latch. The new values (interrupt setting bits, reset
* counter value etc.) are not copied to the actual registers
* until the performance monitor is enabled. In order to get
- * this to work as desired, the permormance monitor needs to
+ * this to work as desired, the performance monitor needs to
* be disabled while writing to the latches. This is a
* HW design issue.
*/
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
index dd43114..da110bd 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
@@ -100,7 +100,7 @@ const struct of_device_id mpc52xx_pci_ids[] __initdata = {
};
/* ======================================================================== */
-/* PCI configuration acess */
+/* PCI configuration access */
/* ======================================================================== */
static int
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index e81403b..ab2027c 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -302,7 +302,7 @@ static void __init setup_chaos(struct pci_controller *hose,
* 1 -> Skip the device but act as if the access was successfull
* (return 0xff's on reads, eventually, cache config space
* accesses in a later version)
- * -1 -> Hide the device (unsuccessful acess)
+ * -1 -> Hide the device (unsuccessful access)
*/
static int u3_ht_skip_device(struct pci_controller *hose,
struct pci_bus *bus, unsigned int devfn)
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index ae3c4db..bafc3f8 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -160,7 +160,7 @@ static int dart_build(struct iommu_table *tbl, long index,
dp = ((unsigned int*)tbl->it_base) + index;
- /* On U3, all memory is contigous, so we can move this
+ /* On U3, all memory is contiguous, so we can move this
* out of the loop.
*/
l = npages;
diff --git a/arch/s390/math-emu/math.c b/arch/s390/math-emu/math.c
index 3ee78cc..cd4e9c1 100644
--- a/arch/s390/math-emu/math.c
+++ b/arch/s390/math-emu/math.c
@@ -2088,7 +2088,7 @@ int math_emu_ldr(__u8 *opcode) {
__u16 opc = *((__u16 *) opcode);
if ((opc & 0x90) == 0) { /* test if rx in {0,2,4,6} */
- /* we got an exception therfore ry can't be in {0,2,4,6} */
+ /* we got an exception therefore ry can't be in {0,2,4,6} */
asm volatile( /* load rx from fp_regs.fprs[ry] */
" bras 1,0f\n"
" ld 0,0(%1)\n"
@@ -2118,7 +2118,7 @@ int math_emu_ler(__u8 *opcode) {
__u16 opc = *((__u16 *) opcode);
if ((opc & 0x90) == 0) { /* test if rx in {0,2,4,6} */
- /* we got an exception therfore ry can't be in {0,2,4,6} */
+ /* we got an exception therefore ry can't be in {0,2,4,6} */
asm volatile( /* load rx from fp_regs.fprs[ry] */
" bras 1,0f\n"
" le 0,0(%1)\n"
diff --git a/arch/sh/include/mach-common/mach/titan.h b/arch/sh/include/mach-common/mach/titan.h
index 03f3583..4a674d2 100644
--- a/arch/sh/include/mach-common/mach/titan.h
+++ b/arch/sh/include/mach-common/mach/titan.h
@@ -1,5 +1,5 @@
/*
- * Platform defintions for Titan
+ * Platform definitions for Titan
*/
#ifndef _ASM_SH_TITAN_H
#define _ASM_SH_TITAN_H
diff --git a/arch/x86/include/asm/desc_defs.h b/arch/x86/include/asm/desc_defs.h
index 9d66848..278441f 100644
--- a/arch/x86/include/asm/desc_defs.h
+++ b/arch/x86/include/asm/desc_defs.h
@@ -12,9 +12,9 @@
#include <linux/types.h>
/*
- * FIXME: Acessing the desc_struct through its fields is more elegant,
+ * FIXME: Accessing the desc_struct through its fields is more elegant,
* and should be the one valid thing to do. However, a lot of open code
- * still touches the a and b acessors, and doing this allow us to do it
+ * still touches the a and b accessors, and doing this allow us to do it
* incrementally. We keep the signature as a struct, rather than an union,
* so we can get rid of it transparently in the future -- glommer
*/
diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h
index ede6998..91df7c5 100644
--- a/arch/x86/include/asm/mmzone_32.h
+++ b/arch/x86/include/asm/mmzone_32.h
@@ -47,7 +47,7 @@ static inline void resume_map_numa_kva(pgd_t *pgd) {}
/*
* generic node memory support, the following assumptions apply:
*
- * 1) memory comes in 64Mb contigious chunks which are either present or not
+ * 1) memory comes in 64Mb contiguous chunks which are either present or not
* 2) we will not have more than 64Gb in total
*
* for now assume that 64Gb is max amount of RAM for whole system
diff --git a/arch/x86/include/asm/sigcontext.h b/arch/x86/include/asm/sigcontext.h
index 72e5a44..04459d2 100644
--- a/arch/x86/include/asm/sigcontext.h
+++ b/arch/x86/include/asm/sigcontext.h
@@ -124,7 +124,7 @@ struct sigcontext {
* fpstate is really (struct _fpstate *) or (struct _xstate *)
* depending on the FP_XSTATE_MAGIC1 encoded in the SW reserved
* bytes of (struct _fpstate) and FP_XSTATE_MAGIC2 present at the end
- * of extended memory layout. See comments at the defintion of
+ * of extended memory layout. See comments at the definition of
* (struct _fpx_sw_bytes)
*/
void __user *fpstate; /* zero when no FPU/extended context */
@@ -219,7 +219,7 @@ struct sigcontext {
* fpstate is really (struct _fpstate *) or (struct _xstate *)
* depending on the FP_XSTATE_MAGIC1 encoded in the SW reserved
* bytes of (struct _fpstate) and FP_XSTATE_MAGIC2 present at the end
- * of extended memory layout. See comments at the defintion of
+ * of extended memory layout. See comments at the definition of
* (struct _fpx_sw_bytes)
*/
void __user *fpstate; /* zero when no FPU/extended context */
diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h
index 80e2984..b414d2b 100644
--- a/arch/x86/include/asm/uv/uv_bau.h
+++ b/arch/x86/include/asm/uv/uv_bau.h
@@ -55,7 +55,7 @@
#define DESC_STATUS_SOURCE_TIMEOUT 3
/*
- * source side threshholds at which message retries print a warning
+ * source side thresholds at which message retries print a warning
*/
#define SOURCE_TIMEOUT_LIMIT 20
#define DESTINATION_TIMEOUT_LIMIT 20
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 87eee07..fb1035c 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -1123,7 +1123,7 @@ static int __init acpi_parse_madt_ioapic_entries(void)
if (!acpi_sci_override_gsi)
acpi_sci_ioapic_setup(acpi_gbl_FADT.sci_interrupt, 0, 0);
- /* Fill in identity legacy mapings where no override */
+ /* Fill in identity legacy mappings where no override */
mp_config_acpi_legacy_irqs();
count =
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 32fb091..1c0fb4d 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1783,7 +1783,7 @@ retry:
goto out;
/*
- * aperture was sucessfully enlarged by 128 MB, try
+ * aperture was successfully enlarged by 128 MB, try
* allocation again
*/
goto retry;
@@ -2490,7 +2490,7 @@ int __init amd_iommu_init_passthrough(void)
struct pci_dev *dev = NULL;
u16 devid;
- /* allocate passthroug domain */
+ /* allocate passthrough domain */
pt_domain = protection_domain_alloc();
if (!pt_domain)
return -ENOMEM;
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index c1bbed1..ab1a8a8 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -1286,7 +1286,7 @@ x86_perf_event_set_period(struct perf_event *event,
return 0;
/*
- * If we are way outside a reasoable range then just skip forward:
+ * If we are way outside a reasonable range then just skip forward:
*/
if (unlikely(left <= -period)) {
left = period;
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index 1f3186c..5b8c750 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -481,7 +481,7 @@ static int __kprobes reenter_kprobe(struct kprobe *p, struct pt_regs *regs,
/*
* Interrupts are disabled on entry as trap3 is an interrupt gate and they
- * remain disabled thorough out this function.
+ * remain disabled throughout this function.
*/
static int __kprobes kprobe_handler(struct pt_regs *regs)
{
@@ -818,7 +818,7 @@ no_change:
/*
* Interrupts are disabled on entry as trap1 is an interrupt gate and they
- * remain disabled thoroughout this function.
+ * remain disabled throughout this function.
*/
static int __kprobes post_kprobe_handler(struct pt_regs *regs)
{
diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c
index 11a4ad4..07bcc30 100644
--- a/arch/x86/mm/kmmio.c
+++ b/arch/x86/mm/kmmio.c
@@ -203,7 +203,7 @@ static void disarm_kmmio_fault_page(struct kmmio_fault_page *f)
*/
/*
* Interrupts are disabled on entry as trap3 is an interrupt gate
- * and they remain disabled thorough out this function.
+ * and they remain disabled throughout this function.
*/
int kmmio_handler(struct pt_regs *regs, unsigned long addr)
{
@@ -302,7 +302,7 @@ no_kmmio:
/*
* Interrupts are disabled on entry as trap1 is an interrupt gate
- * and they remain disabled thorough out this function.
+ * and they remain disabled throughout this function.
* This must always get called as the pair to kmmio_handler().
*/
static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs)
OpenPOWER on IntegriCloud