diff options
Diffstat (limited to 'arch')
562 files changed, 23287 insertions, 11022 deletions
diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c index eb20c3a..a868261 100644 --- a/arch/alpha/kernel/process.c +++ b/arch/alpha/kernel/process.c @@ -43,21 +43,17 @@ #include "proto.h" #include "pci_impl.h" -void default_idle(void) -{ - barrier(); -} - void cpu_idle(void) { + set_thread_flag(TIF_POLLING_NRFLAG); + while (1) { - void (*idle)(void) = default_idle; /* FIXME -- EV6 and LCA45 know how to power down the CPU. */ while (!need_resched()) - idle(); + cpu_relax(); schedule(); } } diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 682367b..ec77721 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -194,6 +194,13 @@ config ARCH_VERSATILE help This enables support for ARM Ltd Versatile board. +config ARCH_REALVIEW + bool "RealView" + select ARM_AMBA + select ICST307 + help + This enables support for ARM Ltd RealView boards. + config ARCH_IMX bool "IMX" @@ -244,6 +251,8 @@ source "arch/arm/mach-versatile/Kconfig" source "arch/arm/mach-aaec2000/Kconfig" +source "arch/arm/mach-realview/Kconfig" + # Definitions to make life easier config ARCH_ACORN bool @@ -315,7 +324,7 @@ menu "Kernel Features" config SMP bool "Symmetric Multi-Processing (EXPERIMENTAL)" - depends on EXPERIMENTAL && BROKEN #&& n + depends on EXPERIMENTAL && REALVIEW_MPCORE help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -340,6 +349,23 @@ config NR_CPUS depends on SMP default "4" +config HOTPLUG_CPU + bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" + depends on SMP && HOTPLUG && EXPERIMENTAL + help + Say Y here to experiment with turning CPUs off and on. CPUs + can be controlled through /sys/devices/system/cpu. + +config LOCAL_TIMERS + bool "Use local timer interrupts" + depends on SMP && REALVIEW_MPCORE + default y + help + Enable support for local timers on SMP platforms, rather then the + legacy IPI broadcast method. Local timers allows the system + accounting to be spread across the timer interval, preventing a + "thundering herd" at every timer tick. + config PREEMPT bool "Preemptible Kernel (EXPERIMENTAL)" depends on EXPERIMENTAL @@ -569,7 +595,7 @@ config FPE_NWFPE config FPE_NWFPE_XP bool "Support extended precision" - depends on FPE_NWFPE && !CPU_BIG_ENDIAN + depends on FPE_NWFPE help Say Y to include 80-bit support in the kernel floating-point emulator. Otherwise, only 32 and 64-bit support is compiled in. @@ -688,8 +714,7 @@ source "drivers/acorn/block/Kconfig" if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \ || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \ - || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \ - || MACH_MP1000 + || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE source "drivers/ide/Kconfig" endif diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 64cf480..114cda7f 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -38,6 +38,7 @@ comma = , # macro, but instead defines a whole series of macros which makes # testing for a specific architecture or later rather impossible. arch-$(CONFIG_CPU_32v6) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6) +arch-$(CONFIG_CPU_32v6K) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k) arch-$(CONFIG_CPU_32v5) :=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4) arch-$(CONFIG_CPU_32v4) :=-D__LINUX_ARM_ARCH__=4 -march=armv4 arch-$(CONFIG_CPU_32v3) :=-D__LINUX_ARM_ARCH__=3 -march=armv3 @@ -99,6 +100,7 @@ textaddr-$(CONFIG_ARCH_FORTUNET) := 0xc0008000 machine-$(CONFIG_ARCH_IMX) := imx machine-$(CONFIG_ARCH_H720X) := h720x machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 + machine-$(CONFIG_ARCH_REALVIEW) := realview ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. @@ -142,7 +144,7 @@ drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/ drivers-$(CONFIG_ARCH_CLPS7500) += drivers/acorn/char/ drivers-$(CONFIG_ARCH_L7200) += drivers/acorn/char/ -libs-y += arch/arm/lib/ +libs-y := arch/arm/lib/ $(libs-y) # Default target when executing plain make ifeq ($(CONFIG_XIP_KERNEL),y) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index a54d2eb..7c7f475 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -39,8 +39,7 @@ defined(CONFIG_ARCH_IXP4XX) || \ defined(CONFIG_ARCH_IXP2000) || \ defined(CONFIG_ARCH_LH7A40X) || \ - defined(CONFIG_ARCH_OMAP) || \ - defined(CONFIG_MACH_MP1000) + defined(CONFIG_ARCH_OMAP) .macro loadsp, rb addruart \rb .endm diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 50f13ee..5ab9458 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -283,8 +283,14 @@ void flush_window(void) putstr("."); } +#ifndef arch_error +#define arch_error(x) +#endif + static void error(char *x) { + arch_error(x); + putstr("\n\n"); putstr(x); putstr("\n\n -- System halted"); diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index bb4eff6..c7fdf39 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -19,12 +19,6 @@ #define SCOOP_REG(d,adr) (*(volatile unsigned short*)(d +(adr))) -/* PCMCIA to Scoop linkage structures for pxa2xx_sharpsl.c - There is no easy way to link multiple scoop devices into one - single entity for the pxa2xx_pcmcia device */ -int scoop_num; -struct scoop_pcmcia_dev *scoop_devs; - struct scoop_dev { void *base; spinlock_t scoop_lock; diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig index 38c9a72..32bd552 100644 --- a/arch/arm/configs/ixdp2401_defconfig +++ b/arch/arm/configs/ixdp2401_defconfig @@ -152,7 +152,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware" +CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware" # CONFIG_XIP_KERNEL is not set # @@ -560,7 +560,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_NR_UARTS=3 # CONFIG_SERIAL_8250_EXTENDED is not set # diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixdp2801_defconfig index 12ef23d..66ac088 100644 --- a/arch/arm/configs/ixdp2801_defconfig +++ b/arch/arm/configs/ixdp2801_defconfig @@ -560,7 +560,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_NR_UARTS=3 # CONFIG_SERIAL_8250_EXTENDED is not set # diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index c279e41..f74c926 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -104,7 +104,7 @@ CONFIG_ARCH_IXCDP1100=y CONFIG_ARCH_PRPMC1100=y CONFIG_ARCH_IXDP4XX=y CONFIG_CPU_IXP46X=y -CONFIG_MACH_GTWX5715=y +# CONFIG_MACH_GTWX5715 is not set # # IXP4xx Options diff --git a/arch/arm/configs/mp1000_defconfig b/arch/arm/configs/realview_defconfig index d2cbc6f..0485b2f 100644 --- a/arch/arm/configs/mp1000_defconfig +++ b/arch/arm/configs/realview_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc1 -# Fri Sep 16 15:48:13 2005 +# Linux kernel version: 2.6.14-rc2 +# Thu Sep 29 14:50:10 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -12,11 +12,9 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y # # Code maturity level options # -CONFIG_EXPERIMENTAL=y -# CONFIG_CLEAN_COMPILE is not set -CONFIG_BROKEN=y +# CONFIG_EXPERIMENTAL is not set +CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 # @@ -24,18 +22,16 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y +# CONFIG_SWAP is not set CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set +CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y +# CONFIG_IKCONFIG is not set CONFIG_INITRAMFS_SOURCE="" -CONFIG_EMBEDDED=y +# CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -58,17 +54,15 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y +# CONFIG_KMOD is not set # # System Type # # CONFIG_ARCH_CLPS7500 is not set -CONFIG_ARCH_CLPS711X=y +# CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_CAMELOT is not set @@ -86,43 +80,43 @@ CONFIG_ARCH_CLPS711X=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_REALVIEW=y # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set # -# CLPS711X/EP721X Implementations +# RealView platform type # -# CONFIG_ARCH_AUTCPU12 is not set -# CONFIG_ARCH_CDB89712 is not set -# CONFIG_ARCH_CEIVA is not set -# CONFIG_ARCH_CLEP7312 is not set -# CONFIG_ARCH_EDB7211 is not set -# CONFIG_ARCH_P720T is not set -# CONFIG_ARCH_FORTUNET is not set -CONFIG_MACH_MP1000=y -CONFIG_MP1000_90MHZ=y +CONFIG_MACH_REALVIEW_EB=y # # Processor Type # CONFIG_CPU_32=y -CONFIG_CPU_ARM720T=y -CONFIG_CPU_32v4=y -CONFIG_CPU_ABRT_LV4T=y -CONFIG_CPU_CACHE_V4=y +CONFIG_CPU_ARM926T=y +# CONFIG_CPU_V6 is not set +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WT=y -CONFIG_CPU_TLB_V4WT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y # # Processor Features # CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_GIC=y +CONFIG_ICST307=y # # Bus support # +CONFIG_ARM_AMBA=y CONFIG_ISA_DMA_API=y # @@ -133,14 +127,8 @@ CONFIG_ISA_DMA_API=y # # Kernel Features # -# CONFIG_SMP is not set -CONFIG_PREEMPT=y # CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set @@ -151,7 +139,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyCL,38400 root=/dev/discs/disc0/part1 ip=any cs89x0_media=rj45" +CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M" # CONFIG_XIP_KERNEL is not set # @@ -163,14 +151,14 @@ CONFIG_CMDLINE="console=ttyCL,38400 root=/dev/discs/disc0/part1 ip=any cs89x0_me # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set # # Userspace binary formats # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_AOUT is not set -CONFIG_BINFMT_MISC=y +# CONFIG_BINFMT_MISC is not set # CONFIG_ARTHUR is not set # @@ -197,10 +185,9 @@ CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y +# CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set @@ -210,36 +197,14 @@ CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y -CONFIG_IPV6=y -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -247,7 +212,6 @@ CONFIG_IPV6=y # Network testing # # CONFIG_NET_PKTGEN is not set -# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -269,14 +233,10 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Memory Technology Devices (MTD) # CONFIG_MTD=y -CONFIG_MTD_DEBUG=y -CONFIG_MTD_DEBUG_VERBOSE=3 +# CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=m -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2 -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -292,45 +252,36 @@ CONFIG_MTD_BLOCK=y # # RAM/ROM/Flash chip drivers # -CONFIG_MTD_CFI=m +CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=m -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -# CONFIG_MTD_CFI_I1 is not set +CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -CONFIG_MTD_CFI_INTELEXT=m -# CONFIG_MTD_CFI_AMDSTD is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=m +CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set -# CONFIG_MTD_XIP is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=m -CONFIG_MTD_PHYSMAP_START=0x0000000 -CONFIG_MTD_PHYSMAP_LEN=0x4000000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_ARM_INTEGRATOR is not set -CONFIG_MTD_EDB7312=m +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_ARM_INTEGRATOR=y +# CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PLATRAM is not set # @@ -340,7 +291,6 @@ CONFIG_MTD_EDB7312=m # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set # CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set # # Disk-On-Chip Device Drivers @@ -352,12 +302,7 @@ CONFIG_MTD_EDB7312=m # # NAND Flash Device Drivers # -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -CONFIG_MTD_NAND_MP1000=y -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND is not set # # Parallel port support @@ -372,53 +317,22 @@ CONFIG_MTD_NAND_IDS=y # Block devices # # CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=2 -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_BLK_DEV_INITRD=y +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 # CONFIG_CDROM_PKTCDVD is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_AS is not set CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y +# CONFIG_IOSCHED_CFQ is not set # CONFIG_ATA_OVER_ETH is not set # -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -# CONFIG_BLK_DEV_HD_IDE is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -# CONFIG_IDE_GENERIC is not set -CONFIG_IDE_ARM=y -CONFIG_BLK_DEV_IDE_MP1000=y -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# # SCSI device support # # CONFIG_RAID_ATTRS is not set @@ -427,14 +341,7 @@ CONFIG_BLK_DEV_IDE_MP1000=y # # Multi-device support (RAID and LVM) # -CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set -CONFIG_BLK_DEV_DM=y -# CONFIG_DM_CRYPT is not set -# CONFIG_DM_SNAPSHOT is not set -# CONFIG_DM_MIRROR is not set -# CONFIG_DM_ZERO is not set -# CONFIG_DM_MULTIPATH is not set +# CONFIG_MD is not set # # Fusion MPT device support @@ -444,7 +351,6 @@ CONFIG_BLK_DEV_DM=y # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # # I2O device support @@ -468,10 +374,9 @@ CONFIG_NETDEVICES=y # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_SMC91X is not set +CONFIG_MII=y +CONFIG_SMC91X=y # CONFIG_DM9000 is not set -CONFIG_CS89x0=y # # Ethernet (1000 Mbit) @@ -496,8 +401,6 @@ CONFIG_CS89x0=y # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -514,17 +417,28 @@ CONFIG_INPUT=y # # Userland interfaces # -# CONFIG_INPUT_MOUSEDEV is not set +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set -CONFIG_INPUT_EVBUG=y +# CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -533,8 +447,9 @@ CONFIG_INPUT_EVBUG=y # Hardware I/O ports # CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_AMBAKMI=y +CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set @@ -549,21 +464,19 @@ CONFIG_HW_CONSOLE=y # # Serial drivers # -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -# CONFIG_SERIAL_8250_EXTENDED is not set +# CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # -CONFIG_SERIAL_CLPS711X=y -CONFIG_SERIAL_CLPS711X_CONSOLE=y +# CONFIG_SERIAL_AMBA_PL010 is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +CONFIG_LEGACY_PTY_COUNT=16 # # IPMI @@ -574,8 +487,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set -CONFIG_NVRAM=y -CONFIG_RTC=y +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -596,9 +509,8 @@ CONFIG_RTC=y # # Hardware Monitoring support # -CONFIG_HWMON=y +# CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices @@ -621,18 +533,72 @@ CONFIG_HWMON=y # # Graphics support # -# CONFIG_FB is not set +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_ARMCLCD=y +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set # # Console display driver support # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # -# CONFIG_SOUND is not set +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +# CONFIG_SND_ARMAACI is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set # # USB support @@ -654,32 +620,17 @@ CONFIG_USB_ARCH_HAS_HCD=y # # File systems # -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_EXT2_FS_POSIX_ACL is not set -# CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_REISERFS_FS_XATTR is not set +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y -CONFIG_QUOTA=y -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -CONFIG_QUOTACTL=y +# CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -694,8 +645,11 @@ CONFIG_DNOTIFY=y # # DOS/FAT/NT Filesystems # +CONFIG_FAT_FS=y # CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -704,7 +658,6 @@ CONFIG_DNOTIFY=y CONFIG_PROC_FS=y CONFIG_SYSFS=y CONFIG_TMPFS=y -# CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set @@ -712,22 +665,10 @@ CONFIG_RAMFS=y # # Miscellaneous filesystems # -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=m +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set @@ -740,32 +681,16 @@ CONFIG_CRAMFS=m CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y +# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -802,7 +727,7 @@ CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set +CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set @@ -818,34 +743,26 @@ CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_UTF8 is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # -CONFIG_PRINTK_TIME=y +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_MAGIC_SYSRQ is not set +CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set CONFIG_FRAME_POINTER=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_WAITQ=y +# CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set -# CONFIG_DEBUG_CLPS711X_UART2 is not set +# CONFIG_DEBUG_LL is not set # # Security options @@ -856,31 +773,7 @@ CONFIG_DEBUG_LL=y # # Cryptographic options # -CONFIG_CRYPTO=y -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO is not set # # Hardware crypto devices @@ -893,5 +786,4 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m +CONFIG_ZLIB_INFLATE=y diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 7b17a87..7a3261f 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -9,6 +9,7 @@ */ #include <linux/module.h> #include <linux/string.h> +#include <linux/cryptohash.h> #include <linux/delay.h> #include <linux/in6.h> #include <linux/syscalls.h> @@ -126,6 +127,9 @@ EXPORT_SYMBOL(__put_user_2); EXPORT_SYMBOL(__put_user_4); EXPORT_SYMBOL(__put_user_8); + /* crypto hash */ +EXPORT_SYMBOL(sha_transform); + /* gcc lib functions */ EXPORT_SYMBOL(__ashldi3); EXPORT_SYMBOL(__ashrdi3); diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index be439ca..d9fb819 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -47,6 +47,13 @@ movne r0, sp adrne lr, 1b bne do_IPI + +#ifdef CONFIG_LOCAL_TIMERS + test_for_ltirq r0, r6, r5, lr + movne r0, sp + adrne lr, 1b + bne do_local_timer +#endif #endif .endm @@ -785,7 +792,7 @@ __kuser_helper_end: * SP points to a minimal amount of processor-private memory, the address * of which is copied into r0 for the mode specific abort handler. */ - .macro vector_stub, name, correction=0 + .macro vector_stub, name, mode, correction=0 .align 5 vector_\name: @@ -805,15 +812,14 @@ vector_\name: @ Prepare for SVC32 mode. IRQs remain disabled. @ mrs r0, cpsr - bic r0, r0, #MODE_MASK - orr r0, r0, #SVC_MODE + eor r0, r0, #(\mode ^ SVC_MODE) msr spsr_cxsf, r0 @ @ the branch table must immediately follow this code @ - mov r0, sp and lr, lr, #0x0f + mov r0, sp ldr lr, [pc, lr, lsl #2] movs pc, lr @ branch to handler in SVC mode .endm @@ -823,7 +829,7 @@ __stubs_start: /* * Interrupt dispatcher */ - vector_stub irq, 4 + vector_stub irq, IRQ_MODE, 4 .long __irq_usr @ 0 (USR_26 / USR_32) .long __irq_invalid @ 1 (FIQ_26 / FIQ_32) @@ -846,7 +852,7 @@ __stubs_start: * Data abort dispatcher * Enter in ABT mode, spsr = USR CPSR, lr = USR PC */ - vector_stub dabt, 8 + vector_stub dabt, ABT_MODE, 8 .long __dabt_usr @ 0 (USR_26 / USR_32) .long __dabt_invalid @ 1 (FIQ_26 / FIQ_32) @@ -869,7 +875,7 @@ __stubs_start: * Prefetch abort dispatcher * Enter in ABT mode, spsr = USR CPSR, lr = USR PC */ - vector_stub pabt, 4 + vector_stub pabt, ABT_MODE, 4 .long __pabt_usr @ 0 (USR_26 / USR_32) .long __pabt_invalid @ 1 (FIQ_26 / FIQ_32) @@ -892,7 +898,7 @@ __stubs_start: * Undef instr entry dispatcher * Enter in UND mode, spsr = SVC/USR CPSR, lr = SVC/USR PC */ - vector_stub und + vector_stub und, UND_MODE .long __und_usr @ 0 (USR_26 / USR_32) .long __und_invalid @ 1 (FIQ_26 / FIQ_32) diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 3284118..d7099db 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -264,6 +264,7 @@ unlock: #endif #ifdef CONFIG_SMP show_ipi_list(p); + show_local_irqs(p); #endif seq_printf(p, "Err: %10lu\n", irq_err_count); } @@ -995,7 +996,7 @@ void __init init_irq_proc(void) struct proc_dir_entry *dir; int irq; - dir = proc_mkdir("irq", 0); + dir = proc_mkdir("irq", NULL); if (!dir) return; @@ -1050,3 +1051,34 @@ static int __init noirqdebug_setup(char *str) } __setup("noirqdebug", noirqdebug_setup); + +#ifdef CONFIG_HOTPLUG_CPU +/* + * The CPU has been marked offline. Migrate IRQs off this CPU. If + * the affinity settings do not allow other CPUs, force them onto any + * available CPU. + */ +void migrate_irqs(void) +{ + unsigned int i, cpu = smp_processor_id(); + + for (i = 0; i < NR_IRQS; i++) { + struct irqdesc *desc = irq_desc + i; + + if (desc->cpu == cpu) { + unsigned int newcpu = any_online_cpu(desc->affinity); + + if (newcpu == NR_CPUS) { + if (printk_ratelimit()) + printk(KERN_INFO "IRQ%u no longer affine to CPU%u\n", + i, cpu); + + cpus_setall(desc->affinity); + newcpu = any_online_cpu(desc->affinity); + } + + route_irq(desc, i, newcpu); + } + } +} +#endif /* CONFIG_HOTPLUG_CPU */ diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 409db6d..30494aa 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -26,6 +26,7 @@ #include <linux/interrupt.h> #include <linux/kallsyms.h> #include <linux/init.h> +#include <linux/cpu.h> #include <asm/system.h> #include <asm/io.h> @@ -85,12 +86,16 @@ EXPORT_SYMBOL(pm_power_off); */ void default_idle(void) { - local_irq_disable(); - if (!need_resched() && !hlt_counter) { - timer_dyn_reprogram(); - arch_idle(); + if (hlt_counter) + cpu_relax(); + else { + local_irq_disable(); + if (!need_resched()) { + timer_dyn_reprogram(); + arch_idle(); + } + local_irq_enable(); } - local_irq_enable(); } /* @@ -105,15 +110,23 @@ void cpu_idle(void) /* endless idle loop with no priority at all */ while (1) { void (*idle)(void) = pm_idle; + +#ifdef CONFIG_HOTPLUG_CPU + if (cpu_is_offline(smp_processor_id())) { + leds_event(led_idle_start); + cpu_die(); + } +#endif + if (!idle) idle = default_idle; - preempt_disable(); leds_event(led_idle_start); while (!need_resched()) idle(); leds_event(led_idle_end); - preempt_enable(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } @@ -346,7 +359,7 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long stack_start, struct thread_info *thread = p->thread_info; struct pt_regs *childregs; - childregs = ((struct pt_regs *)((unsigned long)thread + THREAD_START_SP)) - 1; + childregs = (void *)thread + THREAD_START_SP - sizeof(*regs); *childregs = *regs; childregs->ARM_r0 = 0; childregs->ARM_sp = stack_start; diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 9bd8609..9a340e7 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -648,7 +648,7 @@ static int ptrace_setwmmxregs(struct task_struct *tsk, void __user *ufp) #endif -static int do_ptrace(int request, struct task_struct *child, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { unsigned long tmp; int ret; @@ -782,53 +782,6 @@ static int do_ptrace(int request, struct task_struct *child, long addr, long dat return ret; } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) -{ - struct task_struct *child; - int ret; - - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret == 0) - ret = do_ptrace(request, child, addr, data); - -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); - return ret; -} - asmlinkage void syscall_trace(int why, struct pt_regs *regs) { unsigned long ip; diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index c9b6977..8577416 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -338,7 +338,8 @@ void cpu_init(void) BUG(); } - dump_cpu_info(cpu); + if (system_state == SYSTEM_BOOTING) + dump_cpu_info(cpu); /* * setup stacks for re-entrant exception handlers @@ -838,7 +839,12 @@ static int c_show(struct seq_file *m, void *v) #if defined(CONFIG_SMP) for_each_online_cpu(i) { - seq_printf(m, "Processor\t: %d\n", i); + /* + * glibc reads /proc/cpuinfo to determine the number of + * online processors, looking for lines beginning with + * "processor". Give glibc what it expects. + */ + seq_printf(m, "processor\t: %d\n", i); seq_printf(m, "BogoMIPS\t: %lu.%02lu\n\n", per_cpu(cpu_data, i).loops_per_jiffy / (500000UL/HZ), (per_cpu(cpu_data, i).loops_per_jiffy / (5000UL/HZ)) % 100); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 8261649..e55ea95 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -80,19 +80,23 @@ static DEFINE_SPINLOCK(smp_call_function_lock); int __cpuinit __cpu_up(unsigned int cpu) { - struct task_struct *idle; + struct cpuinfo_arm *ci = &per_cpu(cpu_data, cpu); + struct task_struct *idle = ci->idle; pgd_t *pgd; pmd_t *pmd; int ret; /* - * Spawn a new process manually. Grab a pointer to - * its task struct so we can mess with it + * Spawn a new process manually, if not already done. + * Grab a pointer to its task struct so we can mess with it */ - idle = fork_idle(cpu); - if (IS_ERR(idle)) { - printk(KERN_ERR "CPU%u: fork() failed\n", cpu); - return PTR_ERR(idle); + if (!idle) { + idle = fork_idle(cpu); + if (IS_ERR(idle)) { + printk(KERN_ERR "CPU%u: fork() failed\n", cpu); + return PTR_ERR(idle); + } + ci->idle = idle; } /* @@ -138,7 +142,7 @@ int __cpuinit __cpu_up(unsigned int cpu) ret = -EIO; } - secondary_data.stack = 0; + secondary_data.stack = NULL; secondary_data.pgdir = 0; *pmd_offset(pgd, PHYS_OFFSET) = __pmd(0); @@ -155,6 +159,96 @@ int __cpuinit __cpu_up(unsigned int cpu) return ret; } +#ifdef CONFIG_HOTPLUG_CPU +/* + * __cpu_disable runs on the processor to be shutdown. + */ +int __cpuexit __cpu_disable(void) +{ + unsigned int cpu = smp_processor_id(); + struct task_struct *p; + int ret; + + ret = mach_cpu_disable(cpu); + if (ret) + return ret; + + /* + * Take this CPU offline. Once we clear this, we can't return, + * and we must not schedule until we're ready to give up the cpu. + */ + cpu_clear(cpu, cpu_online_map); + + /* + * OK - migrate IRQs away from this CPU + */ + migrate_irqs(); + + /* + * Stop the local timer for this CPU. + */ + local_timer_stop(cpu); + + /* + * Flush user cache and TLB mappings, and then remove this CPU + * from the vm mask set of all processes. + */ + flush_cache_all(); + local_flush_tlb_all(); + + read_lock(&tasklist_lock); + for_each_process(p) { + if (p->mm) + cpu_clear(cpu, p->mm->cpu_vm_mask); + } + read_unlock(&tasklist_lock); + + return 0; +} + +/* + * called on the thread which is asking for a CPU to be shutdown - + * waits until shutdown has completed, or it is timed out. + */ +void __cpuexit __cpu_die(unsigned int cpu) +{ + if (!platform_cpu_kill(cpu)) + printk("CPU%u: unable to kill\n", cpu); +} + +/* + * Called from the idle thread for the CPU which has been shutdown. + * + * Note that we disable IRQs here, but do not re-enable them + * before returning to the caller. This is also the behaviour + * of the other hotplug-cpu capable cores, so presumably coming + * out of idle fixes this. + */ +void __cpuexit cpu_die(void) +{ + unsigned int cpu = smp_processor_id(); + + local_irq_disable(); + idle_task_exit(); + + /* + * actual CPU shutdown procedure is at least platform (if not + * CPU) specific + */ + platform_cpu_die(cpu); + + /* + * Do not return to the idle loop - jump back to the secondary + * cpu initialisation. There's some initialisation which needs + * to be repeated to undo the effects of taking the CPU offline. + */ + __asm__("mov sp, %0\n" + " b secondary_start_kernel" + : + : "r" ((void *)current->thread_info + THREAD_SIZE - 8)); +} +#endif /* CONFIG_HOTPLUG_CPU */ + /* * This is the secondary CPU boot entry. We're using this CPUs * idle thread stack, but a set of temporary page tables. @@ -162,7 +256,9 @@ int __cpuinit __cpu_up(unsigned int cpu) asmlinkage void __cpuinit secondary_start_kernel(void) { struct mm_struct *mm = &init_mm; - unsigned int cpu = smp_processor_id(); + unsigned int cpu; + + cpu = smp_processor_id(); printk("CPU%u: Booted secondary processor\n", cpu); @@ -179,6 +275,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void) local_flush_tlb_all(); cpu_init(); + preempt_disable(); /* * Give the platform a chance to do its own initialisation. @@ -201,6 +298,11 @@ asmlinkage void __cpuinit secondary_start_kernel(void) cpu_set(cpu, cpu_online_map); /* + * Setup local timer for this CPU. + */ + local_timer_setup(cpu); + + /* * OK, it's off to the idle thread for us */ cpu_idle(); @@ -236,6 +338,8 @@ void __init smp_prepare_boot_cpu(void) { unsigned int cpu = smp_processor_id(); + per_cpu(cpu_data, cpu).idle = current; + cpu_set(cpu, cpu_possible_map); cpu_set(cpu, cpu_present_map); cpu_set(cpu, cpu_online_map); @@ -268,8 +372,8 @@ static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg) * You must not call this function with disabled interrupts, from a * hardware interrupt handler, nor from a bottom half handler. */ -int smp_call_function_on_cpu(void (*func)(void *info), void *info, int retry, - int wait, cpumask_t callmap) +static int smp_call_function_on_cpu(void (*func)(void *info), void *info, + int retry, int wait, cpumask_t callmap) { struct smp_call_struct data; unsigned long timeout; @@ -309,8 +413,8 @@ int smp_call_function_on_cpu(void (*func)(void *info), void *info, int retry, printk(KERN_CRIT "CPU%u: smp_call_function timeout for %p(%p)\n" " callmap %lx pending %lx, %swait\n", - smp_processor_id(), func, info, callmap, data.pending, - wait ? "" : "no "); + smp_processor_id(), func, info, *cpus_addr(callmap), + *cpus_addr(data.pending), wait ? "" : "no "); /* * TRACE @@ -363,6 +467,18 @@ void show_ipi_list(struct seq_file *p) seq_putc(p, '\n'); } +void show_local_irqs(struct seq_file *p) +{ + unsigned int cpu; + + seq_printf(p, "LOC: "); + + for_each_present_cpu(cpu) + seq_printf(p, "%10u ", irq_stat[cpu].local_timer_irqs); + + seq_putc(p, '\n'); +} + static void ipi_timer(struct pt_regs *regs) { int user = user_mode(regs); @@ -373,6 +489,18 @@ static void ipi_timer(struct pt_regs *regs) irq_exit(); } +#ifdef CONFIG_LOCAL_TIMERS +asmlinkage void do_local_timer(struct pt_regs *regs) +{ + int cpu = smp_processor_id(); + + if (local_timer_ack()) { + irq_stat[cpu].local_timer_irqs++; + ipi_timer(regs); + } +} +#endif + /* * ipi_call_function - handle IPI from smp_call_function() * @@ -424,7 +552,7 @@ static void ipi_cpu_stop(unsigned int cpu) * * Bit 0 - Inter-processor function call */ -void do_IPI(struct pt_regs *regs) +asmlinkage void do_IPI(struct pt_regs *regs) { unsigned int cpu = smp_processor_id(); struct ipi_data *ipi = &per_cpu(ipi_data, cpu); diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 71e5b99..391f3ab 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -7,13 +7,27 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ csumpartialcopy.o csumpartialcopyuser.o clearbit.o \ copy_page.o delay.o findbit.o memchr.o memcpy.o \ - memset.o memzero.o setbit.o strncpy_from_user.o \ - strnlen_user.o strchr.o strrchr.o testchangebit.o \ - testclearbit.o testsetbit.o uaccess.o getuser.o \ - putuser.o ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ + memmove.o memset.o memzero.o setbit.o \ + strncpy_from_user.o strnlen_user.o \ + strchr.o strrchr.o \ + testchangebit.o testclearbit.o testsetbit.o \ + getuser.o putuser.o clear_user.o \ + ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ ucmpdi2.o lib1funcs.o div64.o sha1.o \ io-readsb.o io-writesb.o io-readsl.o io-writesl.o +# the code in uaccess.S is not preemption safe and +# probably faster on ARMv3 only +ifeq ($CONFIG_PREEMPT,y) + lib-y += copy_from_user.o copy_to_user.o +else +ifneq ($(CONFIG_CPU_32v3),y) + lib-y += copy_from_user.o copy_to_user.o +else + lib-y += uaccess.o +endif +endif + ifeq ($(CONFIG_CPU_32v3),y) lib-y += io-readsw-armv3.o io-writesw-armv3.o else diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h index 64a988c..b8c14e9 100644 --- a/arch/arm/lib/bitops.h +++ b/arch/arm/lib/bitops.h @@ -1,6 +1,6 @@ #include <linux/config.h> -#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_CPU_MPCORE) +#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_CPU_32v6K) .macro bitop, instr mov r2, #1 and r3, r0, #7 @ Get bit offset @@ -34,7 +34,7 @@ and r2, r0, #7 mov r3, #1 mov r3, r3, lsl r2 - save_and_disable_irqs ip, r2 + save_and_disable_irqs ip ldrb r2, [r1, r0, lsr #3] \instr r2, r2, r3 strb r2, [r1, r0, lsr #3] @@ -54,7 +54,7 @@ add r1, r1, r0, lsr #3 and r3, r0, #7 mov r0, #1 - save_and_disable_irqs ip, r2 + save_and_disable_irqs ip ldrb r2, [r1] tst r2, r0, lsl r3 \instr r2, r2, r0, lsl r3 diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S new file mode 100644 index 0000000..7ff9f83 --- /dev/null +++ b/arch/arm/lib/clear_user.S @@ -0,0 +1,52 @@ +/* + * linux/arch/arm/lib/clear_user.S + * + * Copyright (C) 1995, 1996,1997,1998 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <asm/assembler.h> + + .text + +/* Prototype: int __arch_clear_user(void *addr, size_t sz) + * Purpose : clear some user memory + * Params : addr - user memory address to clear + * : sz - number of bytes to clear + * Returns : number of bytes NOT cleared + */ +ENTRY(__arch_clear_user) + stmfd sp!, {r1, lr} + mov r2, #0 + cmp r1, #4 + blt 2f + ands ip, r0, #3 + beq 1f + cmp ip, #2 +USER( strbt r2, [r0], #1) +USER( strlebt r2, [r0], #1) +USER( strltbt r2, [r0], #1) + rsb ip, ip, #4 + sub r1, r1, ip @ 7 6 5 4 3 2 1 +1: subs r1, r1, #8 @ -1 -2 -3 -4 -5 -6 -7 +USER( strplt r2, [r0], #4) +USER( strplt r2, [r0], #4) + bpl 1b + adds r1, r1, #4 @ 3 2 1 0 -1 -2 -3 +USER( strplt r2, [r0], #4) +2: tst r1, #2 @ 1x 1x 0x 0x 1x 1x 0x +USER( strnebt r2, [r0], #1) +USER( strnebt r2, [r0], #1) + tst r1, #1 @ x1 x0 x1 x0 x1 x0 x1 +USER( strnebt r2, [r0], #1) + mov r0, #0 + LOADREGS(fd,sp!, {r1, pc}) + + .section .fixup,"ax" + .align 0 +9001: LOADREGS(fd,sp!, {r0, pc}) + .previous + diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S new file mode 100644 index 0000000..7497393 --- /dev/null +++ b/arch/arm/lib/copy_from_user.S @@ -0,0 +1,101 @@ +/* + * linux/arch/arm/lib/copy_from_user.S + * + * Author: Nicolas Pitre + * Created: Sep 29, 2005 + * Copyright: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + +/* + * Prototype: + * + * size_t __arch_copy_from_user(void *to, const void *from, size_t n) + * + * Purpose: + * + * copy a block to kernel memory from user memory + * + * Params: + * + * to = kernel memory + * from = user memory + * n = number of bytes to copy + * + * Return value: + * + * Number of bytes NOT copied. + */ + + .macro ldr1w ptr reg abort +100: ldrt \reg, [\ptr], #4 + .section __ex_table, "a" + .long 100b, \abort + .previous + .endm + + .macro ldr4w ptr reg1 reg2 reg3 reg4 abort + ldr1w \ptr, \reg1, \abort + ldr1w \ptr, \reg2, \abort + ldr1w \ptr, \reg3, \abort + ldr1w \ptr, \reg4, \abort + .endm + + .macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + ldr4w \ptr, \reg1, \reg2, \reg3, \reg4, \abort + ldr4w \ptr, \reg5, \reg6, \reg7, \reg8, \abort + .endm + + .macro ldr1b ptr reg cond=al abort +100: ldr\cond\()bt \reg, [\ptr], #1 + .section __ex_table, "a" + .long 100b, \abort + .previous + .endm + + .macro str1w ptr reg abort + str \reg, [\ptr], #4 + .endm + + .macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + stmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8} + .endm + + .macro str1b ptr reg cond=al abort + str\cond\()b \reg, [\ptr], #1 + .endm + + .macro enter reg1 reg2 + mov r3, #0 + stmdb sp!, {r0, r2, r3, \reg1, \reg2} + .endm + + .macro exit reg1 reg2 + add sp, sp, #8 + ldmfd sp!, {r0, \reg1, \reg2} + .endm + + .text + +ENTRY(__arch_copy_from_user) + +#include "copy_template.S" + + .section .fixup,"ax" + .align 0 + copy_abort_preamble + ldmfd sp!, {r1, r2} + sub r3, r0, r1 + rsb r1, r3, r2 + str r1, [sp] + bl __memzero + ldr r0, [sp], #4 + copy_abort_end + .previous + diff --git a/arch/arm/lib/copy_template.S b/arch/arm/lib/copy_template.S new file mode 100644 index 0000000..838e435 --- /dev/null +++ b/arch/arm/lib/copy_template.S @@ -0,0 +1,255 @@ +/* + * linux/arch/arm/lib/copy_template.s + * + * Code template for optimized memory copy functions + * + * Author: Nicolas Pitre + * Created: Sep 28, 2005 + * Copyright: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * This can be used to enable code to cacheline align the source pointer. + * Experiments on tested architectures (StrongARM and XScale) didn't show + * this a worthwhile thing to do. That might be different in the future. + */ +//#define CALGN(code...) code +#define CALGN(code...) + +/* + * Theory of operation + * ------------------- + * + * This file provides the core code for a forward memory copy used in + * the implementation of memcopy(), copy_to_user() and copy_from_user(). + * + * The including file must define the following accessor macros + * according to the need of the given function: + * + * ldr1w ptr reg abort + * + * This loads one word from 'ptr', stores it in 'reg' and increments + * 'ptr' to the next word. The 'abort' argument is used for fixup tables. + * + * ldr4w ptr reg1 reg2 reg3 reg4 abort + * ldr8w ptr, reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + * + * This loads four or eight words starting from 'ptr', stores them + * in provided registers and increments 'ptr' past those words. + * The'abort' argument is used for fixup tables. + * + * ldr1b ptr reg cond abort + * + * Similar to ldr1w, but it loads a byte and increments 'ptr' one byte. + * It also must apply the condition code if provided, otherwise the + * "al" condition is assumed by default. + * + * str1w ptr reg abort + * str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + * str1b ptr reg cond abort + * + * Same as their ldr* counterparts, but data is stored to 'ptr' location + * rather than being loaded. + * + * enter reg1 reg2 + * + * Preserve the provided registers on the stack plus any additional + * data as needed by the implementation including this code. Called + * upon code entry. + * + * exit reg1 reg2 + * + * Restore registers with the values previously saved with the + * 'preserv' macro. Called upon code termination. + */ + + + enter r4, lr + + subs r2, r2, #4 + blt 8f + ands ip, r0, #3 + PLD( pld [r1, #0] ) + bne 9f + ands ip, r1, #3 + bne 10f + +1: subs r2, r2, #(28) + stmfd sp!, {r5 - r8} + blt 5f + + CALGN( ands ip, r1, #31 ) + CALGN( rsb r3, ip, #32 ) + CALGN( sbcnes r4, r3, r2 ) @ C is always set here + CALGN( bcs 2f ) + CALGN( adr r4, 6f ) + CALGN( subs r2, r2, r3 ) @ C gets set + CALGN( add pc, r4, ip ) + + PLD( pld [r1, #0] ) +2: PLD( subs r2, r2, #96 ) + PLD( pld [r1, #28] ) + PLD( blt 4f ) + PLD( pld [r1, #60] ) + PLD( pld [r1, #92] ) + +3: PLD( pld [r1, #124] ) +4: ldr8w r1, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f + subs r2, r2, #32 + str8w r0, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f + bge 3b + PLD( cmn r2, #96 ) + PLD( bge 4b ) + +5: ands ip, r2, #28 + rsb ip, ip, #32 + addne pc, pc, ip @ C is always clear here + b 7f +6: nop + ldr1w r1, r3, abort=20f + ldr1w r1, r4, abort=20f + ldr1w r1, r5, abort=20f + ldr1w r1, r6, abort=20f + ldr1w r1, r7, abort=20f + ldr1w r1, r8, abort=20f + ldr1w r1, lr, abort=20f + + add pc, pc, ip + nop + nop + str1w r0, r3, abort=20f + str1w r0, r4, abort=20f + str1w r0, r5, abort=20f + str1w r0, r6, abort=20f + str1w r0, r7, abort=20f + str1w r0, r8, abort=20f + str1w r0, lr, abort=20f + + CALGN( bcs 2b ) + +7: ldmfd sp!, {r5 - r8} + +8: movs r2, r2, lsl #31 + ldr1b r1, r3, ne, abort=21f + ldr1b r1, r4, cs, abort=21f + ldr1b r1, ip, cs, abort=21f + str1b r0, r3, ne, abort=21f + str1b r0, r4, cs, abort=21f + str1b r0, ip, cs, abort=21f + + exit r4, pc + +9: rsb ip, ip, #4 + cmp ip, #2 + ldr1b r1, r3, gt, abort=21f + ldr1b r1, r4, ge, abort=21f + ldr1b r1, lr, abort=21f + str1b r0, r3, gt, abort=21f + str1b r0, r4, ge, abort=21f + subs r2, r2, ip + str1b r0, lr, abort=21f + blt 8b + ands ip, r1, #3 + beq 1b + +10: bic r1, r1, #3 + cmp ip, #2 + ldr1w r1, lr, abort=21f + beq 17f + bgt 18f + + + .macro forward_copy_shift pull push + + subs r2, r2, #28 + blt 14f + + CALGN( ands ip, r1, #31 ) + CALGN( rsb ip, ip, #32 ) + CALGN( sbcnes r4, ip, r2 ) @ C is always set here + CALGN( subcc r2, r2, ip ) + CALGN( bcc 15f ) + +11: stmfd sp!, {r5 - r9} + + PLD( pld [r1, #0] ) + PLD( subs r2, r2, #96 ) + PLD( pld [r1, #28] ) + PLD( blt 13f ) + PLD( pld [r1, #60] ) + PLD( pld [r1, #92] ) + +12: PLD( pld [r1, #124] ) +13: ldr4w r1, r4, r5, r6, r7, abort=19f + mov r3, lr, pull #\pull + subs r2, r2, #32 + ldr4w r1, r8, r9, ip, lr, abort=19f + orr r3, r3, r4, push #\push + mov r4, r4, pull #\pull + orr r4, r4, r5, push #\push + mov r5, r5, pull #\pull + orr r5, r5, r6, push #\push + mov r6, r6, pull #\pull + orr r6, r6, r7, push #\push + mov r7, r7, pull #\pull + orr r7, r7, r8, push #\push + mov r8, r8, pull #\pull + orr r8, r8, r9, push #\push + mov r9, r9, pull #\pull + orr r9, r9, ip, push #\push + mov ip, ip, pull #\pull + orr ip, ip, lr, push #\push + str8w r0, r3, r4, r5, r6, r7, r8, r9, ip, , abort=19f + bge 12b + PLD( cmn r2, #96 ) + PLD( bge 13b ) + + ldmfd sp!, {r5 - r9} + +14: ands ip, r2, #28 + beq 16f + +15: mov r3, lr, pull #\pull + ldr1w r1, lr, abort=21f + subs ip, ip, #4 + orr r3, r3, lr, push #\push + str1w r0, r3, abort=21f + bgt 15b + CALGN( cmp r2, #0 ) + CALGN( bge 11b ) + +16: sub r1, r1, #(\push / 8) + b 8b + + .endm + + + forward_copy_shift pull=8 push=24 + +17: forward_copy_shift pull=16 push=16 + +18: forward_copy_shift pull=24 push=8 + + +/* + * Abort preanble and completion macros. + * If a fixup handler is required then those macros must surround it. + * It is assumed that the fixup code will handle the private part of + * the exit macro. + */ + + .macro copy_abort_preamble +19: ldmfd sp!, {r5 - r9} + b 21f +20: ldmfd sp!, {r5 - r8} +21: + .endm + + .macro copy_abort_end + ldmfd sp!, {r4, pc} + .endm + diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S new file mode 100644 index 0000000..4a6d8ea --- /dev/null +++ b/arch/arm/lib/copy_to_user.S @@ -0,0 +1,101 @@ +/* + * linux/arch/arm/lib/copy_to_user.S + * + * Author: Nicolas Pitre + * Created: Sep 29, 2005 + * Copyright: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + +/* + * Prototype: + * + * size_t __arch_copy_to_user(void *to, const void *from, size_t n) + * + * Purpose: + * + * copy a block to user memory from kernel memory + * + * Params: + * + * to = user memory + * from = kernel memory + * n = number of bytes to copy + * + * Return value: + * + * Number of bytes NOT copied. + */ + + .macro ldr1w ptr reg abort + ldr \reg, [\ptr], #4 + .endm + + .macro ldr4w ptr reg1 reg2 reg3 reg4 abort + ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4} + .endm + + .macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8} + .endm + + .macro ldr1b ptr reg cond=al abort + ldr\cond\()b \reg, [\ptr], #1 + .endm + + .macro str1w ptr reg abort +100: strt \reg, [\ptr], #4 + .section __ex_table, "a" + .long 100b, \abort + .previous + .endm + + .macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + str1w \ptr, \reg1, \abort + str1w \ptr, \reg2, \abort + str1w \ptr, \reg3, \abort + str1w \ptr, \reg4, \abort + str1w \ptr, \reg5, \abort + str1w \ptr, \reg6, \abort + str1w \ptr, \reg7, \abort + str1w \ptr, \reg8, \abort + .endm + + .macro str1b ptr reg cond=al abort +100: str\cond\()bt \reg, [\ptr], #1 + .section __ex_table, "a" + .long 100b, \abort + .previous + .endm + + .macro enter reg1 reg2 + mov r3, #0 + stmdb sp!, {r0, r2, r3, \reg1, \reg2} + .endm + + .macro exit reg1 reg2 + add sp, sp, #8 + ldmfd sp!, {r0, \reg1, \reg2} + .endm + + .text + +ENTRY(__arch_copy_to_user) + +#include "copy_template.S" + + .section .fixup,"ax" + .align 0 + copy_abort_preamble + ldmfd sp!, {r1, r2, r3} + sub r0, r0, r1 + rsb r0, r0, r2 + copy_abort_end + .previous + diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S index f5a593c..7e71d67 100644 --- a/arch/arm/lib/memcpy.S +++ b/arch/arm/lib/memcpy.S @@ -1,393 +1,59 @@ /* * linux/arch/arm/lib/memcpy.S * - * Copyright (C) 1995-1999 Russell King + * Author: Nicolas Pitre + * Created: Sep 28, 2005 + * Copyright: MontaVista Software, Inc. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * ASM optimised string functions + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. */ + #include <linux/linkage.h> #include <asm/assembler.h> - .text - -#define ENTER \ - mov ip,sp ;\ - stmfd sp!,{r0,r4-r9,fp,ip,lr,pc} ;\ - sub fp,ip,#4 - -#define EXIT \ - LOADREGS(ea, fp, {r0, r4 - r9, fp, sp, pc}) - -#define EXITEQ \ - LOADREGS(eqea, fp, {r0, r4 - r9, fp, sp, pc}) - -/* - * Prototype: void memcpy(void *to,const void *from,unsigned long n); - */ -ENTRY(memcpy) -ENTRY(memmove) - ENTER - cmp r1, r0 - bcc 23f - subs r2, r2, #4 - blt 6f - PLD( pld [r1, #0] ) - ands ip, r0, #3 - bne 7f - ands ip, r1, #3 - bne 8f + .macro ldr1w ptr reg abort + ldr \reg, [\ptr], #4 + .endm -1: subs r2, r2, #8 - blt 5f - subs r2, r2, #20 - blt 4f - PLD( pld [r1, #28] ) - PLD( subs r2, r2, #64 ) - PLD( blt 3f ) -2: PLD( pld [r1, #60] ) - PLD( pld [r1, #92] ) - ldmia r1!, {r3 - r9, ip} - subs r2, r2, #32 - stmgeia r0!, {r3 - r9, ip} - ldmgeia r1!, {r3 - r9, ip} - subges r2, r2, #32 - stmia r0!, {r3 - r9, ip} - bge 2b -3: PLD( ldmia r1!, {r3 - r9, ip} ) - PLD( adds r2, r2, #32 ) - PLD( stmgeia r0!, {r3 - r9, ip} ) - PLD( ldmgeia r1!, {r3 - r9, ip} ) - PLD( subges r2, r2, #32 ) - PLD( stmia r0!, {r3 - r9, ip} ) -4: cmn r2, #16 - ldmgeia r1!, {r3 - r6} - subge r2, r2, #16 - stmgeia r0!, {r3 - r6} - adds r2, r2, #20 - ldmgeia r1!, {r3 - r5} - subge r2, r2, #12 - stmgeia r0!, {r3 - r5} -5: adds r2, r2, #8 - blt 6f - subs r2, r2, #4 - ldrlt r3, [r1], #4 - ldmgeia r1!, {r4, r5} - subge r2, r2, #4 - strlt r3, [r0], #4 - stmgeia r0!, {r4, r5} + .macro ldr4w ptr reg1 reg2 reg3 reg4 abort + ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4} + .endm -6: adds r2, r2, #4 - EXITEQ - cmp r2, #2 - ldrb r3, [r1], #1 - ldrgeb r4, [r1], #1 - ldrgtb r5, [r1], #1 - strb r3, [r0], #1 - strgeb r4, [r0], #1 - strgtb r5, [r0], #1 - EXIT + .macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8} + .endm -7: rsb ip, ip, #4 - cmp ip, #2 - ldrb r3, [r1], #1 - ldrgeb r4, [r1], #1 - ldrgtb r5, [r1], #1 - strb r3, [r0], #1 - strgeb r4, [r0], #1 - strgtb r5, [r0], #1 - subs r2, r2, ip - blt 6b - ands ip, r1, #3 - beq 1b + .macro ldr1b ptr reg cond=al abort + ldr\cond\()b \reg, [\ptr], #1 + .endm -8: bic r1, r1, #3 - ldr r7, [r1], #4 - cmp ip, #2 - bgt 18f - beq 13f - cmp r2, #12 - blt 11f - PLD( pld [r1, #12] ) - sub r2, r2, #12 - PLD( subs r2, r2, #32 ) - PLD( blt 10f ) - PLD( pld [r1, #28] ) -9: PLD( pld [r1, #44] ) -10: mov r3, r7, pull #8 - ldmia r1!, {r4 - r7} - subs r2, r2, #16 - orr r3, r3, r4, push #24 - mov r4, r4, pull #8 - orr r4, r4, r5, push #24 - mov r5, r5, pull #8 - orr r5, r5, r6, push #24 - mov r6, r6, pull #8 - orr r6, r6, r7, push #24 - stmia r0!, {r3 - r6} - bge 9b - PLD( cmn r2, #32 ) - PLD( bge 10b ) - PLD( add r2, r2, #32 ) - adds r2, r2, #12 - blt 12f -11: mov r3, r7, pull #8 - ldr r7, [r1], #4 - subs r2, r2, #4 - orr r3, r3, r7, push #24 - str r3, [r0], #4 - bge 11b -12: sub r1, r1, #3 - b 6b + .macro str1w ptr reg abort + str \reg, [\ptr], #4 + .endm -13: cmp r2, #12 - blt 16f - PLD( pld [r1, #12] ) - sub r2, r2, #12 - PLD( subs r2, r2, #32 ) - PLD( blt 15f ) - PLD( pld [r1, #28] ) -14: PLD( pld [r1, #44] ) -15: mov r3, r7, pull #16 - ldmia r1!, {r4 - r7} - subs r2, r2, #16 - orr r3, r3, r4, push #16 - mov r4, r4, pull #16 - orr r4, r4, r5, push #16 - mov r5, r5, pull #16 - orr r5, r5, r6, push #16 - mov r6, r6, pull #16 - orr r6, r6, r7, push #16 - stmia r0!, {r3 - r6} - bge 14b - PLD( cmn r2, #32 ) - PLD( bge 15b ) - PLD( add r2, r2, #32 ) - adds r2, r2, #12 - blt 17f -16: mov r3, r7, pull #16 - ldr r7, [r1], #4 - subs r2, r2, #4 - orr r3, r3, r7, push #16 - str r3, [r0], #4 - bge 16b -17: sub r1, r1, #2 - b 6b + .macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + stmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8} + .endm -18: cmp r2, #12 - blt 21f - PLD( pld [r1, #12] ) - sub r2, r2, #12 - PLD( subs r2, r2, #32 ) - PLD( blt 20f ) - PLD( pld [r1, #28] ) -19: PLD( pld [r1, #44] ) -20: mov r3, r7, pull #24 - ldmia r1!, {r4 - r7} - subs r2, r2, #16 - orr r3, r3, r4, push #8 - mov r4, r4, pull #24 - orr r4, r4, r5, push #8 - mov r5, r5, pull #24 - orr r5, r5, r6, push #8 - mov r6, r6, pull #24 - orr r6, r6, r7, push #8 - stmia r0!, {r3 - r6} - bge 19b - PLD( cmn r2, #32 ) - PLD( bge 20b ) - PLD( add r2, r2, #32 ) - adds r2, r2, #12 - blt 22f -21: mov r3, r7, pull #24 - ldr r7, [r1], #4 - subs r2, r2, #4 - orr r3, r3, r7, push #8 - str r3, [r0], #4 - bge 21b -22: sub r1, r1, #1 - b 6b + .macro str1b ptr reg cond=al abort + str\cond\()b \reg, [\ptr], #1 + .endm + .macro enter reg1 reg2 + stmdb sp!, {r0, \reg1, \reg2} + .endm -23: add r1, r1, r2 - add r0, r0, r2 - subs r2, r2, #4 - blt 29f - PLD( pld [r1, #-4] ) - ands ip, r0, #3 - bne 30f - ands ip, r1, #3 - bne 31f + .macro exit reg1 reg2 + ldmfd sp!, {r0, \reg1, \reg2} + .endm -24: subs r2, r2, #8 - blt 28f - subs r2, r2, #20 - blt 27f - PLD( pld [r1, #-32] ) - PLD( subs r2, r2, #64 ) - PLD( blt 26f ) -25: PLD( pld [r1, #-64] ) - PLD( pld [r1, #-96] ) - ldmdb r1!, {r3 - r9, ip} - subs r2, r2, #32 - stmgedb r0!, {r3 - r9, ip} - ldmgedb r1!, {r3 - r9, ip} - subges r2, r2, #32 - stmdb r0!, {r3 - r9, ip} - bge 25b -26: PLD( ldmdb r1!, {r3 - r9, ip} ) - PLD( adds r2, r2, #32 ) - PLD( stmgedb r0!, {r3 - r9, ip} ) - PLD( ldmgedb r1!, {r3 - r9, ip} ) - PLD( subges r2, r2, #32 ) - PLD( stmdb r0!, {r3 - r9, ip} ) -27: cmn r2, #16 - ldmgedb r1!, {r3 - r6} - subge r2, r2, #16 - stmgedb r0!, {r3 - r6} - adds r2, r2, #20 - ldmgedb r1!, {r3 - r5} - subge r2, r2, #12 - stmgedb r0!, {r3 - r5} -28: adds r2, r2, #8 - blt 29f - subs r2, r2, #4 - ldrlt r3, [r1, #-4]! - ldmgedb r1!, {r4, r5} - subge r2, r2, #4 - strlt r3, [r0, #-4]! - stmgedb r0!, {r4, r5} + .text -29: adds r2, r2, #4 - EXITEQ - cmp r2, #2 - ldrb r3, [r1, #-1]! - ldrgeb r4, [r1, #-1]! - ldrgtb r5, [r1, #-1]! - strb r3, [r0, #-1]! - strgeb r4, [r0, #-1]! - strgtb r5, [r0, #-1]! - EXIT +/* Prototype: void *memcpy(void *dest, const void *src, size_t n); */ -30: cmp ip, #2 - ldrb r3, [r1, #-1]! - ldrgeb r4, [r1, #-1]! - ldrgtb r5, [r1, #-1]! - strb r3, [r0, #-1]! - strgeb r4, [r0, #-1]! - strgtb r5, [r0, #-1]! - subs r2, r2, ip - blt 29b - ands ip, r1, #3 - beq 24b - -31: bic r1, r1, #3 - ldr r3, [r1], #0 - cmp ip, #2 - blt 41f - beq 36f - cmp r2, #12 - blt 34f - PLD( pld [r1, #-16] ) - sub r2, r2, #12 - PLD( subs r2, r2, #32 ) - PLD( blt 33f ) - PLD( pld [r1, #-32] ) -32: PLD( pld [r1, #-48] ) -33: mov r7, r3, push #8 - ldmdb r1!, {r3, r4, r5, r6} - subs r2, r2, #16 - orr r7, r7, r6, pull #24 - mov r6, r6, push #8 - orr r6, r6, r5, pull #24 - mov r5, r5, push #8 - orr r5, r5, r4, pull #24 - mov r4, r4, push #8 - orr r4, r4, r3, pull #24 - stmdb r0!, {r4, r5, r6, r7} - bge 32b - PLD( cmn r2, #32 ) - PLD( bge 33b ) - PLD( add r2, r2, #32 ) - adds r2, r2, #12 - blt 35f -34: mov ip, r3, push #8 - ldr r3, [r1, #-4]! - subs r2, r2, #4 - orr ip, ip, r3, pull #24 - str ip, [r0, #-4]! - bge 34b -35: add r1, r1, #3 - b 29b - -36: cmp r2, #12 - blt 39f - PLD( pld [r1, #-16] ) - sub r2, r2, #12 - PLD( subs r2, r2, #32 ) - PLD( blt 38f ) - PLD( pld [r1, #-32] ) -37: PLD( pld [r1, #-48] ) -38: mov r7, r3, push #16 - ldmdb r1!, {r3, r4, r5, r6} - subs r2, r2, #16 - orr r7, r7, r6, pull #16 - mov r6, r6, push #16 - orr r6, r6, r5, pull #16 - mov r5, r5, push #16 - orr r5, r5, r4, pull #16 - mov r4, r4, push #16 - orr r4, r4, r3, pull #16 - stmdb r0!, {r4, r5, r6, r7} - bge 37b - PLD( cmn r2, #32 ) - PLD( bge 38b ) - PLD( add r2, r2, #32 ) - adds r2, r2, #12 - blt 40f -39: mov ip, r3, push #16 - ldr r3, [r1, #-4]! - subs r2, r2, #4 - orr ip, ip, r3, pull #16 - str ip, [r0, #-4]! - bge 39b -40: add r1, r1, #2 - b 29b +ENTRY(memcpy) -41: cmp r2, #12 - blt 44f - PLD( pld [r1, #-16] ) - sub r2, r2, #12 - PLD( subs r2, r2, #32 ) - PLD( blt 43f ) - PLD( pld [r1, #-32] ) -42: PLD( pld [r1, #-48] ) -43: mov r7, r3, push #24 - ldmdb r1!, {r3, r4, r5, r6} - subs r2, r2, #16 - orr r7, r7, r6, pull #8 - mov r6, r6, push #24 - orr r6, r6, r5, pull #8 - mov r5, r5, push #24 - orr r5, r5, r4, pull #8 - mov r4, r4, push #24 - orr r4, r4, r3, pull #8 - stmdb r0!, {r4, r5, r6, r7} - bge 42b - PLD( cmn r2, #32 ) - PLD( bge 43b ) - PLD( add r2, r2, #32 ) - adds r2, r2, #12 - blt 45f -44: mov ip, r3, push #24 - ldr r3, [r1, #-4]! - subs r2, r2, #4 - orr ip, ip, r3, pull #8 - str ip, [r0, #-4]! - bge 44b -45: add r1, r1, #1 - b 29b +#include "copy_template.S" diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S new file mode 100644 index 0000000..ef7fddc --- /dev/null +++ b/arch/arm/lib/memmove.S @@ -0,0 +1,206 @@ +/* + * linux/arch/arm/lib/memmove.S + * + * Author: Nicolas Pitre + * Created: Sep 28, 2005 + * Copyright: (C) MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + +/* + * This can be used to enable code to cacheline align the source pointer. + * Experiments on tested architectures (StrongARM and XScale) didn't show + * this a worthwhile thing to do. That might be different in the future. + */ +//#define CALGN(code...) code +#define CALGN(code...) + + .text + +/* + * Prototype: void *memmove(void *dest, const void *src, size_t n); + * + * Note: + * + * If the memory regions don't overlap, we simply branch to memcpy which is + * normally a bit faster. Otherwise the copy is done going downwards. This + * is a transposition of the code from copy_template.S but with the copy + * occurring in the opposite direction. + */ + +ENTRY(memmove) + + subs ip, r0, r1 + cmphi r2, ip + bls memcpy + + stmfd sp!, {r0, r4, lr} + add r1, r1, r2 + add r0, r0, r2 + subs r2, r2, #4 + blt 8f + ands ip, r0, #3 + PLD( pld [r1, #-4] ) + bne 9f + ands ip, r1, #3 + bne 10f + +1: subs r2, r2, #(28) + stmfd sp!, {r5 - r8} + blt 5f + + CALGN( ands ip, r1, #31 ) + CALGN( sbcnes r4, ip, r2 ) @ C is always set here + CALGN( bcs 2f ) + CALGN( adr r4, 6f ) + CALGN( subs r2, r2, ip ) @ C is set here + CALGN( add pc, r4, ip ) + + PLD( pld [r1, #-4] ) +2: PLD( subs r2, r2, #96 ) + PLD( pld [r1, #-32] ) + PLD( blt 4f ) + PLD( pld [r1, #-64] ) + PLD( pld [r1, #-96] ) + +3: PLD( pld [r1, #-128] ) +4: ldmdb r1!, {r3, r4, r5, r6, r7, r8, ip, lr} + subs r2, r2, #32 + stmdb r0!, {r3, r4, r5, r6, r7, r8, ip, lr} + bge 3b + PLD( cmn r2, #96 ) + PLD( bge 4b ) + +5: ands ip, r2, #28 + rsb ip, ip, #32 + addne pc, pc, ip @ C is always clear here + b 7f +6: nop + ldr r3, [r1, #-4]! + ldr r4, [r1, #-4]! + ldr r5, [r1, #-4]! + ldr r6, [r1, #-4]! + ldr r7, [r1, #-4]! + ldr r8, [r1, #-4]! + ldr lr, [r1, #-4]! + + add pc, pc, ip + nop + nop + str r3, [r0, #-4]! + str r4, [r0, #-4]! + str r5, [r0, #-4]! + str r6, [r0, #-4]! + str r7, [r0, #-4]! + str r8, [r0, #-4]! + str lr, [r0, #-4]! + + CALGN( bcs 2b ) + +7: ldmfd sp!, {r5 - r8} + +8: movs r2, r2, lsl #31 + ldrneb r3, [r1, #-1]! + ldrcsb r4, [r1, #-1]! + ldrcsb ip, [r1, #-1] + strneb r3, [r0, #-1]! + strcsb r4, [r0, #-1]! + strcsb ip, [r0, #-1] + ldmfd sp!, {r0, r4, pc} + +9: cmp ip, #2 + ldrgtb r3, [r1, #-1]! + ldrgeb r4, [r1, #-1]! + ldrb lr, [r1, #-1]! + strgtb r3, [r0, #-1]! + strgeb r4, [r0, #-1]! + subs r2, r2, ip + strb lr, [r0, #-1]! + blt 8b + ands ip, r1, #3 + beq 1b + +10: bic r1, r1, #3 + cmp ip, #2 + ldr r3, [r1, #0] + beq 17f + blt 18f + + + .macro backward_copy_shift push pull + + subs r2, r2, #28 + blt 14f + + CALGN( ands ip, r1, #31 ) + CALGN( rsb ip, ip, #32 ) + CALGN( sbcnes r4, ip, r2 ) @ C is always set here + CALGN( subcc r2, r2, ip ) + CALGN( bcc 15f ) + +11: stmfd sp!, {r5 - r9} + + PLD( pld [r1, #-4] ) + PLD( subs r2, r2, #96 ) + PLD( pld [r1, #-32] ) + PLD( blt 13f ) + PLD( pld [r1, #-64] ) + PLD( pld [r1, #-96] ) + +12: PLD( pld [r1, #-128] ) +13: ldmdb r1!, {r7, r8, r9, ip} + mov lr, r3, push #\push + subs r2, r2, #32 + ldmdb r1!, {r3, r4, r5, r6} + orr lr, lr, ip, pull #\pull + mov ip, ip, push #\push + orr ip, ip, r9, pull #\pull + mov r9, r9, push #\push + orr r9, r9, r8, pull #\pull + mov r8, r8, push #\push + orr r8, r8, r7, pull #\pull + mov r7, r7, push #\push + orr r7, r7, r6, pull #\pull + mov r6, r6, push #\push + orr r6, r6, r5, pull #\pull + mov r5, r5, push #\push + orr r5, r5, r4, pull #\pull + mov r4, r4, push #\push + orr r4, r4, r3, pull #\pull + stmdb r0!, {r4 - r9, ip, lr} + bge 12b + PLD( cmn r2, #96 ) + PLD( bge 13b ) + + ldmfd sp!, {r5 - r9} + +14: ands ip, r2, #28 + beq 16f + +15: mov lr, r3, push #\push + ldr r3, [r1, #-4]! + subs ip, ip, #4 + orr lr, lr, r3, pull #\pull + str lr, [r0, #-4]! + bgt 15b + CALGN( cmp r2, #0 ) + CALGN( bge 11b ) + +16: add r1, r1, #(\pull / 8) + b 8b + + .endm + + + backward_copy_shift push=8 pull=24 + +17: backward_copy_shift push=16 pull=16 + +18: backward_copy_shift push=24 pull=8 + diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S index d3ed063..6f1b5b4 100644 --- a/arch/arm/lib/uaccess.S +++ b/arch/arm/lib/uaccess.S @@ -43,8 +43,6 @@ ENTRY(__arch_copy_to_user) stmfd sp!, {r2, r4 - r7, lr} cmp r2, #4 blt .c2u_not_enough - PLD( pld [r1, #0] ) - PLD( pld [r0, #0] ) ands ip, r0, #3 bne .c2u_dest_not_aligned .c2u_dest_aligned: @@ -73,25 +71,13 @@ USER( strt r3, [r0], #4) @ May fault sub r2, r2, ip subs ip, ip, #32 blt .c2u_0rem8lp - PLD( pld [r1, #28] ) - PLD( pld [r0, #28] ) - PLD( subs ip, ip, #64 ) - PLD( blt .c2u_0cpynopld ) - PLD( pld [r1, #60] ) - PLD( pld [r0, #60] ) - -.c2u_0cpy8lp: - PLD( pld [r1, #92] ) - PLD( pld [r0, #92] ) -.c2u_0cpynopld: ldmia r1!, {r3 - r6} + +.c2u_0cpy8lp: ldmia r1!, {r3 - r6} stmia r0!, {r3 - r6} @ Shouldnt fault ldmia r1!, {r3 - r6} subs ip, ip, #32 stmia r0!, {r3 - r6} @ Shouldnt fault bpl .c2u_0cpy8lp - PLD( cmn ip, #64 ) - PLD( bge .c2u_0cpynopld ) - PLD( add ip, ip, #64 ) .c2u_0rem8lp: cmn ip, #16 ldmgeia r1!, {r3 - r6} @@ -143,17 +129,8 @@ USER( strt r3, [r0], #4) @ May fault sub r2, r2, ip subs ip, ip, #16 blt .c2u_1rem8lp - PLD( pld [r1, #12] ) - PLD( pld [r0, #12] ) - PLD( subs ip, ip, #32 ) - PLD( blt .c2u_1cpynopld ) - PLD( pld [r1, #28] ) - PLD( pld [r0, #28] ) - -.c2u_1cpy8lp: - PLD( pld [r1, #44] ) - PLD( pld [r0, #44] ) -.c2u_1cpynopld: mov r3, r7, pull #8 + +.c2u_1cpy8lp: mov r3, r7, pull #8 ldmia r1!, {r4 - r7} subs ip, ip, #16 orr r3, r3, r4, push #24 @@ -165,9 +142,6 @@ USER( strt r3, [r0], #4) @ May fault orr r6, r6, r7, push #24 stmia r0!, {r3 - r6} @ Shouldnt fault bpl .c2u_1cpy8lp - PLD( cmn ip, #32 ) - PLD( bge .c2u_1cpynopld ) - PLD( add ip, ip, #32 ) .c2u_1rem8lp: tst ip, #8 movne r3, r7, pull #8 @@ -210,17 +184,8 @@ USER( strt r3, [r0], #4) @ May fault sub r2, r2, ip subs ip, ip, #16 blt .c2u_2rem8lp - PLD( pld [r1, #12] ) - PLD( pld [r0, #12] ) - PLD( subs ip, ip, #32 ) - PLD( blt .c2u_2cpynopld ) - PLD( pld [r1, #28] ) - PLD( pld [r0, #28] ) - -.c2u_2cpy8lp: - PLD( pld [r1, #44] ) - PLD( pld [r0, #44] ) -.c2u_2cpynopld: mov r3, r7, pull #16 + +.c2u_2cpy8lp: mov r3, r7, pull #16 ldmia r1!, {r4 - r7} subs ip, ip, #16 orr r3, r3, r4, push #16 @@ -232,9 +197,6 @@ USER( strt r3, [r0], #4) @ May fault orr r6, r6, r7, push #16 stmia r0!, {r3 - r6} @ Shouldnt fault bpl .c2u_2cpy8lp - PLD( cmn ip, #32 ) - PLD( bge .c2u_2cpynopld ) - PLD( add ip, ip, #32 ) .c2u_2rem8lp: tst ip, #8 movne r3, r7, pull #16 @@ -277,17 +239,8 @@ USER( strt r3, [r0], #4) @ May fault sub r2, r2, ip subs ip, ip, #16 blt .c2u_3rem8lp - PLD( pld [r1, #12] ) - PLD( pld [r0, #12] ) - PLD( subs ip, ip, #32 ) - PLD( blt .c2u_3cpynopld ) - PLD( pld [r1, #28] ) - PLD( pld [r0, #28] ) - -.c2u_3cpy8lp: - PLD( pld [r1, #44] ) - PLD( pld [r0, #44] ) -.c2u_3cpynopld: mov r3, r7, pull #24 + +.c2u_3cpy8lp: mov r3, r7, pull #24 ldmia r1!, {r4 - r7} subs ip, ip, #16 orr r3, r3, r4, push #8 @@ -299,9 +252,6 @@ USER( strt r3, [r0], #4) @ May fault orr r6, r6, r7, push #8 stmia r0!, {r3 - r6} @ Shouldnt fault bpl .c2u_3cpy8lp - PLD( cmn ip, #32 ) - PLD( bge .c2u_3cpynopld ) - PLD( add ip, ip, #32 ) .c2u_3rem8lp: tst ip, #8 movne r3, r7, pull #24 @@ -356,8 +306,6 @@ ENTRY(__arch_copy_from_user) stmfd sp!, {r0, r2, r4 - r7, lr} cmp r2, #4 blt .cfu_not_enough - PLD( pld [r1, #0] ) - PLD( pld [r0, #0] ) ands ip, r0, #3 bne .cfu_dest_not_aligned .cfu_dest_aligned: @@ -385,25 +333,13 @@ USER( ldrt r3, [r1], #4) sub r2, r2, ip subs ip, ip, #32 blt .cfu_0rem8lp - PLD( pld [r1, #28] ) - PLD( pld [r0, #28] ) - PLD( subs ip, ip, #64 ) - PLD( blt .cfu_0cpynopld ) - PLD( pld [r1, #60] ) - PLD( pld [r0, #60] ) - -.cfu_0cpy8lp: - PLD( pld [r1, #92] ) - PLD( pld [r0, #92] ) -.cfu_0cpynopld: ldmia r1!, {r3 - r6} @ Shouldnt fault + +.cfu_0cpy8lp: ldmia r1!, {r3 - r6} @ Shouldnt fault stmia r0!, {r3 - r6} ldmia r1!, {r3 - r6} @ Shouldnt fault subs ip, ip, #32 stmia r0!, {r3 - r6} bpl .cfu_0cpy8lp - PLD( cmn ip, #64 ) - PLD( bge .cfu_0cpynopld ) - PLD( add ip, ip, #64 ) .cfu_0rem8lp: cmn ip, #16 ldmgeia r1!, {r3 - r6} @ Shouldnt fault @@ -456,17 +392,8 @@ USER( ldrt r7, [r1], #4) @ May fault sub r2, r2, ip subs ip, ip, #16 blt .cfu_1rem8lp - PLD( pld [r1, #12] ) - PLD( pld [r0, #12] ) - PLD( subs ip, ip, #32 ) - PLD( blt .cfu_1cpynopld ) - PLD( pld [r1, #28] ) - PLD( pld [r0, #28] ) - -.cfu_1cpy8lp: - PLD( pld [r1, #44] ) - PLD( pld [r0, #44] ) -.cfu_1cpynopld: mov r3, r7, pull #8 + +.cfu_1cpy8lp: mov r3, r7, pull #8 ldmia r1!, {r4 - r7} @ Shouldnt fault subs ip, ip, #16 orr r3, r3, r4, push #24 @@ -478,9 +405,6 @@ USER( ldrt r7, [r1], #4) @ May fault orr r6, r6, r7, push #24 stmia r0!, {r3 - r6} bpl .cfu_1cpy8lp - PLD( cmn ip, #32 ) - PLD( bge .cfu_1cpynopld ) - PLD( add ip, ip, #32 ) .cfu_1rem8lp: tst ip, #8 movne r3, r7, pull #8 @@ -523,17 +447,8 @@ USER( ldrt r7, [r1], #4) @ May fault sub r2, r2, ip subs ip, ip, #16 blt .cfu_2rem8lp - PLD( pld [r1, #12] ) - PLD( pld [r0, #12] ) - PLD( subs ip, ip, #32 ) - PLD( blt .cfu_2cpynopld ) - PLD( pld [r1, #28] ) - PLD( pld [r0, #28] ) - -.cfu_2cpy8lp: - PLD( pld [r1, #44] ) - PLD( pld [r0, #44] ) -.cfu_2cpynopld: mov r3, r7, pull #16 + +.cfu_2cpy8lp: mov r3, r7, pull #16 ldmia r1!, {r4 - r7} @ Shouldnt fault subs ip, ip, #16 orr r3, r3, r4, push #16 @@ -545,9 +460,6 @@ USER( ldrt r7, [r1], #4) @ May fault orr r6, r6, r7, push #16 stmia r0!, {r3 - r6} bpl .cfu_2cpy8lp - PLD( cmn ip, #32 ) - PLD( bge .cfu_2cpynopld ) - PLD( add ip, ip, #32 ) .cfu_2rem8lp: tst ip, #8 movne r3, r7, pull #16 @@ -590,17 +502,8 @@ USER( ldrt r7, [r1], #4) @ May fault sub r2, r2, ip subs ip, ip, #16 blt .cfu_3rem8lp - PLD( pld [r1, #12] ) - PLD( pld [r0, #12] ) - PLD( subs ip, ip, #32 ) - PLD( blt .cfu_3cpynopld ) - PLD( pld [r1, #28] ) - PLD( pld [r0, #28] ) - -.cfu_3cpy8lp: - PLD( pld [r1, #44] ) - PLD( pld [r0, #44] ) -.cfu_3cpynopld: mov r3, r7, pull #24 + +.cfu_3cpy8lp: mov r3, r7, pull #24 ldmia r1!, {r4 - r7} @ Shouldnt fault orr r3, r3, r4, push #8 mov r4, r4, pull #24 @@ -612,9 +515,6 @@ USER( ldrt r7, [r1], #4) @ May fault stmia r0!, {r3 - r6} subs ip, ip, #16 bpl .cfu_3cpy8lp - PLD( cmn ip, #32 ) - PLD( bge .cfu_3cpynopld ) - PLD( add ip, ip, #32 ) .cfu_3rem8lp: tst ip, #8 movne r3, r7, pull #24 @@ -657,41 +557,3 @@ USER( ldrgtbt r3, [r1], #1) @ May fault LOADREGS(fd,sp!, {r4 - r7, pc}) .previous -/* Prototype: int __arch_clear_user(void *addr, size_t sz) - * Purpose : clear some user memory - * Params : addr - user memory address to clear - * : sz - number of bytes to clear - * Returns : number of bytes NOT cleared - */ -ENTRY(__arch_clear_user) - stmfd sp!, {r1, lr} - mov r2, #0 - cmp r1, #4 - blt 2f - ands ip, r0, #3 - beq 1f - cmp ip, #2 -USER( strbt r2, [r0], #1) -USER( strlebt r2, [r0], #1) -USER( strltbt r2, [r0], #1) - rsb ip, ip, #4 - sub r1, r1, ip @ 7 6 5 4 3 2 1 -1: subs r1, r1, #8 @ -1 -2 -3 -4 -5 -6 -7 -USER( strplt r2, [r0], #4) -USER( strplt r2, [r0], #4) - bpl 1b - adds r1, r1, #4 @ 3 2 1 0 -1 -2 -3 -USER( strplt r2, [r0], #4) -2: tst r1, #2 @ 1x 1x 0x 0x 1x 1x 0x -USER( strnebt r2, [r0], #1) -USER( strnebt r2, [r0], #1) - tst r1, #1 @ x1 x0 x1 x0 x1 x0 x1 -USER( strnebt r2, [r0], #1) - mov r0, #0 - LOADREGS(fd,sp!, {r1, pc}) - - .section .fixup,"ax" - .align 0 -9001: LOADREGS(fd,sp!, {r0, pc}) - .previous - diff --git a/arch/arm/mach-aaec2000/clock.c b/arch/arm/mach-aaec2000/clock.c index 99e0191..0340ddc 100644 --- a/arch/arm/mach-aaec2000/clock.c +++ b/arch/arm/mach-aaec2000/clock.c @@ -14,6 +14,7 @@ #include <linux/list.h> #include <linux/errno.h> #include <linux/err.h> +#include <linux/string.h> #include <asm/semaphore.h> #include <asm/hardware/clock.h> diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index d5c1550..0793dcf 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -69,17 +69,6 @@ config EP72XX_ROM_BOOT You almost surely want to say N here. -config MACH_MP1000 - bool "MACH_MP1000" - help - Say Y if you intend to run the kernel on the Comdial MP1000 platform. - -config MP1000_90MHZ - bool "MP1000_90MHZ" - depends on MACH_MP1000 - help - Say Y if you have the MP1000 configured to be set at 90MHZ rather than 74MHZ - endmenu endif diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile index 8a6dc1c..4a19731 100644 --- a/arch/arm/mach-clps711x/Makefile +++ b/arch/arm/mach-clps711x/Makefile @@ -15,7 +15,6 @@ obj-$(CONFIG_ARCH_CDB89712) += cdb89712.o obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o obj-$(CONFIG_ARCH_EDB7211) += edb7211-arch.o edb7211-mm.o obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o -obj-$(CONFIG_MACH_MP1000) += mp1000-mach.o mp1000-mm.o mp1000-seprom.o obj-$(CONFIG_ARCH_P720T) += p720t.o leds-$(CONFIG_ARCH_P720T) += p720t-leds.o obj-$(CONFIG_LEDS) += $(leds-y) diff --git a/arch/arm/mach-clps711x/edb7211-mm.c b/arch/arm/mach-clps711x/edb7211-mm.c index 72f8bb0..0d52e08 100644 --- a/arch/arm/mach-clps711x/edb7211-mm.c +++ b/arch/arm/mach-clps711x/edb7211-mm.c @@ -55,22 +55,22 @@ static struct map_desc edb7211_io_desc[] __initdata = { .virtual = EP7211_VIRT_EXTKBD, .pfn = __phys_to_pfn(EP7211_PHYS_EXTKBD), .length = SZ_1M, - .type - MT_DEVICE + .type = MT_DEVICE, }, { /* and CS8900A Ethernet chip */ .virtual = EP7211_VIRT_CS8900A, .pfn = __phys_to_pfn(EP7211_PHYS_CS8900A), .length = SZ_1M, - .type = MT_DEVICE + .type = MT_DEVICE, }, { /* flash banks */ .virtual = EP7211_VIRT_FLASH1, .pfn = __phys_to_pfn(EP7211_PHYS_FLASH1), .length = SZ_8M, - .type = MT_DEVICE + .type = MT_DEVICE, }, { .virtual = EP7211_VIRT_FLASH2, .pfn = __phys_to_pfn(EP7211_PHYS_FLASH2), .length = SZ_8M, - .type = MT_DEVICE + .type = MT_DEVICE, } }; diff --git a/arch/arm/mach-clps711x/mp1000-mach.c b/arch/arm/mach-clps711x/mp1000-mach.c deleted file mode 100644 index c2816bc..0000000 --- a/arch/arm/mach-clps711x/mp1000-mach.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * linux/arch/arm/mach-mp1000/mp1000.c - * - * Copyright (C) 2005 Comdial Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/init.h> -#include <linux/types.h> -#include <linux/string.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/arch/mp1000-seprom.h> - -#include "common.h" - -extern void mp1000_map_io(void); - -static void __init mp1000_init(void) -{ - seprom_init(); -} - -MACHINE_START(MP1000, "Comdial MP1000") - /* Maintainer: Jon Ringle */ - .phys_ram = 0xc0000000, - .phys_io = 0x80000000, - .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, - .boot_params = 0xc0015100, - .map_io = mp1000_map_io, - .init_irq = clps711x_init_irq, - .init_machine = mp1000_init, - .timer = &clps711x_timer, -MACHINE_END - diff --git a/arch/arm/mach-clps711x/mp1000-mm.c b/arch/arm/mach-clps711x/mp1000-mm.c deleted file mode 100644 index 20e810b..0000000 --- a/arch/arm/mach-clps711x/mp1000-mm.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * linux/arch/arm/mach-mp1000/mm.c - * - * Extra MM routines for the MP1000 - * - * Copyright (C) 2005 Comdial Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/hardware.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/sizes.h> - -#include <asm/mach/map.h> - -extern void clps711x_map_io(void); - -static struct map_desc mp1000_io_desc[] __initdata = { - { MP1000_EIO_BASE, MP1000_EIO_START, MP1000_EIO_SIZE, MT_DEVICE }, - { MP1000_FIO_BASE, MP1000_FIO_START, MP1000_FIO_SIZE, MT_DEVICE }, - { MP1000_LIO_BASE, MP1000_LIO_START, MP1000_LIO_SIZE, MT_DEVICE }, - { MP1000_NIO_BASE, MP1000_NIO_START, MP1000_NIO_SIZE, MT_DEVICE }, - { MP1000_IDE_BASE, MP1000_IDE_START, MP1000_IDE_SIZE, MT_DEVICE }, - { MP1000_DSP_BASE, MP1000_DSP_START, MP1000_DSP_SIZE, MT_DEVICE } -}; - -void __init mp1000_map_io(void) -{ - clps711x_map_io(); - iotable_init(mp1000_io_desc, ARRAY_SIZE(mp1000_io_desc)); -} diff --git a/arch/arm/mach-clps711x/mp1000-seprom.c b/arch/arm/mach-clps711x/mp1000-seprom.c deleted file mode 100644 index b22d0be..0000000 --- a/arch/arm/mach-clps711x/mp1000-seprom.c +++ /dev/null @@ -1,195 +0,0 @@ -/*` - * mp1000-seprom.c - * - * This file contains the Serial EEPROM code for the MP1000 board - * - * Copyright (C) 2005 Comdial Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <asm/hardware.h> -#include <asm/hardware/clps7111.h> -#include <asm/arch/mp1000-seprom.h> - -/* If SepromInit() can initialize and checksum the seprom successfully, */ -/* then it will point seprom_data_ptr at the shadow copy. */ - -static eeprom_struct seprom_data; /* shadow copy of seprom content */ - -eeprom_struct *seprom_data_ptr = 0; /* 0 => not initialized */ - -/* - * Port D Bit 5 is Chip Select for EEPROM - * Port E Bit 0 is Input, Data out from EEPROM - * Port E Bit 1 is Output, Data in to EEPROM - * Port E Bit 2 is Output, CLK to EEPROM - */ - -static char *port_d_ptr = (char *)(CLPS7111_VIRT_BASE + PDDR); -static char *port_e_ptr = (char *)(CLPS7111_VIRT_BASE + PEDR); - -#define NO_OF_SHORTS 64 // Device is 64 x 16 bits -#define ENABLE_RW 0 -#define DISABLE_RW 1 - -static inline void toggle_seprom_clock(void) -{ - *port_e_ptr |= HwPortESepromCLK; - *port_e_ptr &= ~(HwPortESepromCLK); -} - -static inline void select_eeprom(void) -{ - *port_d_ptr |= HwPortDEECS; - *port_e_ptr &= ~(HwPortESepromCLK); -} - -static inline void deselect_eeprom(void) -{ - *port_d_ptr &= ~(HwPortDEECS); - *port_e_ptr &= ~(HwPortESepromDIn); -} - -/* - * GetSepromDataPtr - returns pointer to shadow (RAM) copy of seprom - * and returns 0 if seprom is not initialized or - * has a checksum error. - */ - -eeprom_struct* get_seprom_ptr(void) -{ - return seprom_data_ptr; -} - -unsigned char* get_eeprom_mac_address(void) -{ - return seprom_data_ptr->variant.eprom_struct.mac_Address; -} - -/* - * ReadSProm, Physically reads data from the Serial PROM - */ -static void read_sprom(short address, int length, eeprom_struct *buffer) -{ - short data = COMMAND_READ | (address & 0x3F); - short bit; - int i; - - select_eeprom(); - - // Clock in 9 bits of the command - for (i = 0, bit = 0x100; i < 9; i++, bit >>= 1) { - if (data & bit) - *port_e_ptr |= HwPortESepromDIn; - else - *port_e_ptr &= ~(HwPortESepromDIn); - - toggle_seprom_clock(); - } - - // - // Now read one or more shorts of data from the Seprom - // - while (length-- > 0) { - data = 0; - - // Read 16 bits at a time - for (i = 0; i < 16; i++) { - data <<= 1; - toggle_seprom_clock(); - data |= *port_e_ptr & HwPortESepromDOut; - - } - - buffer->variant.eprom_short_data[address++] = data; - } - - deselect_eeprom(); - - return; -} - - - -/* - * ReadSerialPROM - * - * Input: Pointer to array of 64 x 16 Bits - * - * Output: if no problem reading data is filled in - */ -static void read_serial_prom(eeprom_struct *data) -{ - read_sprom(0, 64, data); -} - - -// -// Compute Serial EEPROM checksum -// -// Input: Pointer to struct with Eprom data -// -// Output: The computed Eprom checksum -// -static short compute_seprom_checksum(eeprom_struct *data) -{ - short checksum = 0; - int i; - - for (i = 0; i < 126; i++) { - checksum += (short)data->variant.eprom_byte_data[i]; - } - - return((short)(0x5555 - (checksum & 0xFFFF))); -} - -// -// Make sure the data port bits for the SEPROM are correctly initialised -// - -void __init seprom_init(void) -{ - short checksum; - - // Init Port D - *(char *)(CLPS7111_VIRT_BASE + PDDDR) = 0x0; - *(char *)(CLPS7111_VIRT_BASE + PDDR) = 0x15; - - // Init Port E - *(int *)(CLPS7111_VIRT_BASE + PEDDR) = 0x06; - *(int *)(CLPS7111_VIRT_BASE + PEDR) = 0x04; - - // - // Make sure that EEPROM struct size never exceeds 128 bytes - // - if (sizeof(eeprom_struct) > 128) { - panic("Serial PROM struct size > 128, aborting read\n"); - } - - read_serial_prom(&seprom_data); - - checksum = compute_seprom_checksum(&seprom_data); - - if (checksum != seprom_data.variant.eprom_short_data[63]) { - panic("Serial EEPROM checksum failed\n"); - } - - seprom_data_ptr = &seprom_data; -} - diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index 1526164..ed46149 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -251,9 +251,33 @@ static struct platform_device serial_device = { }, }; +static struct resource am79c961_resources[] = { + { + .start = 0x220, + .end = 0x238, + .flags = IORESOURCE_IO, + }, { + .start = IRQ_EBSA110_ETHERNET, + .end = IRQ_EBSA110_ETHERNET, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device am79c961_device = { + .name = "am79c961", + .id = -1, + .num_resources = ARRAY_SIZE(am79c961_resources), + .resource = am79c961_resources, +}; + +static struct platform_device *ebsa110_devices[] = { + &serial_device, + &am79c961_device, +}; + static int __init ebsa110_init(void) { - return platform_device_register(&serial_device); + return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices)); } arch_initcall(ebsa110_init); diff --git a/arch/arm/mach-epxa10db/mm.c b/arch/arm/mach-epxa10db/mm.c index e8832d0..cfd0d21 100644 --- a/arch/arm/mach-epxa10db/mm.c +++ b/arch/arm/mach-epxa10db/mm.c @@ -25,6 +25,7 @@ #include <asm/hardware.h> #include <asm/io.h> #include <asm/sizes.h> +#include <asm/page.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index a1b153d..a4bafee 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -420,8 +420,7 @@ static int impd1_probe(struct lm_device *dev) free_impd1: if (impd1 && impd1->base) iounmap(impd1->base); - if (impd1) - kfree(impd1); + kfree(impd1); release_lm: release_mem_region(dev->resource.start, SZ_4K); return ret; diff --git a/arch/arm/mach-ixp2000/Makefile b/arch/arm/mach-ixp2000/Makefile index 1e6139d..9621aeb 100644 --- a/arch/arm/mach-ixp2000/Makefile +++ b/arch/arm/mach-ixp2000/Makefile @@ -1,7 +1,7 @@ # # Makefile for the linux kernel. # -obj-y := core.o pci.o +obj-y := core.o pci.o uengine.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index 01c393c..6851aba 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -1,5 +1,5 @@ /* - * arch/arm/mach-ixp2000/common.c + * arch/arm/mach-ixp2000/core.c * * Common routines used by all IXP2400/2800 based platforms. * @@ -49,7 +49,6 @@ static unsigned long ixp2000_slowport_irq_flags; *************************************************************************/ void ixp2000_acquire_slowport(struct slowport_cfg *new_cfg, struct slowport_cfg *old_cfg) { - spin_lock_irqsave(&ixp2000_slowport_lock, ixp2000_slowport_irq_flags); old_cfg->CCR = *IXP2000_SLOWPORT_CCR; @@ -62,7 +61,7 @@ void ixp2000_acquire_slowport(struct slowport_cfg *new_cfg, struct slowport_cfg ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, new_cfg->WTC); ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, new_cfg->RTC); ixp2000_reg_write(IXP2000_SLOWPORT_PCR, new_cfg->PCR); - ixp2000_reg_write(IXP2000_SLOWPORT_ADC, new_cfg->ADC); + ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, new_cfg->ADC); } void ixp2000_release_slowport(struct slowport_cfg *old_cfg) @@ -71,7 +70,7 @@ void ixp2000_release_slowport(struct slowport_cfg *old_cfg) ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, old_cfg->WTC); ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, old_cfg->RTC); ixp2000_reg_write(IXP2000_SLOWPORT_PCR, old_cfg->PCR); - ixp2000_reg_write(IXP2000_SLOWPORT_ADC, old_cfg->ADC); + ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, old_cfg->ADC); spin_unlock_irqrestore(&ixp2000_slowport_lock, ixp2000_slowport_irq_flags); @@ -85,67 +84,58 @@ static struct map_desc ixp2000_io_desc[] __initdata = { .virtual = IXP2000_CAP_VIRT_BASE, .pfn = __phys_to_pfn(IXP2000_CAP_PHYS_BASE), .length = IXP2000_CAP_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = IXP2000_INTCTL_VIRT_BASE, .pfn = __phys_to_pfn(IXP2000_INTCTL_PHYS_BASE), .length = IXP2000_INTCTL_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = IXP2000_PCI_CREG_VIRT_BASE, .pfn = __phys_to_pfn(IXP2000_PCI_CREG_PHYS_BASE), .length = IXP2000_PCI_CREG_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = IXP2000_PCI_CSR_VIRT_BASE, .pfn = __phys_to_pfn(IXP2000_PCI_CSR_PHYS_BASE), .length = IXP2000_PCI_CSR_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = IXP2000_MSF_VIRT_BASE, .pfn = __phys_to_pfn(IXP2000_MSF_PHYS_BASE), .length = IXP2000_MSF_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = IXP2000_PCI_IO_VIRT_BASE, .pfn = __phys_to_pfn(IXP2000_PCI_IO_PHYS_BASE), .length = IXP2000_PCI_IO_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = IXP2000_PCI_CFG0_VIRT_BASE, .pfn = __phys_to_pfn(IXP2000_PCI_CFG0_PHYS_BASE), .length = IXP2000_PCI_CFG0_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = IXP2000_PCI_CFG1_VIRT_BASE, .pfn = __phys_to_pfn(IXP2000_PCI_CFG1_PHYS_BASE), .length = IXP2000_PCI_CFG1_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, } }; void __init ixp2000_map_io(void) { - extern unsigned int processor_id; - /* - * On IXP2400 CPUs we need to use MT_IXP2000_DEVICE for - * tweaking the PMDs so XCB=101. On IXP2800s we use the normal - * PMD flags. + * On IXP2400 CPUs we need to use MT_IXP2000_DEVICE so that + * XCB=101 (to avoid triggering erratum #66), and given that + * this mode speeds up I/O accesses and we have write buffer + * flushes in the right places anyway, it doesn't hurt to use + * XCB=101 for all IXP2000s. */ - if ((processor_id & 0xfffffff0) == 0x69054190) { - int i; - - printk(KERN_INFO "Enabling IXP2400 erratum #66 workaround\n"); - - for(i=0;i<ARRAY_SIZE(ixp2000_io_desc);i++) - ixp2000_io_desc[i].type = MT_IXP2000_DEVICE; - } - iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc)); /* Set slowport to 8-bit mode. */ - ixp2000_reg_write(IXP2000_SLOWPORT_FRM, 1); + ixp2000_reg_wrb(IXP2000_SLOWPORT_FRM, 1); } @@ -209,7 +199,7 @@ static int ixp2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) write_seqlock(&xtime_lock); /* clear timer 1 */ - ixp2000_reg_write(IXP2000_T1_CLR, 1); + ixp2000_reg_wrb(IXP2000_T1_CLR, 1); while ((next_jiffy_time - *missing_jiffy_timer_csr) > ticks_per_jiffy) { timer_tick(regs); @@ -252,12 +242,12 @@ void __init ixp2000_init_time(unsigned long tick_rate) ixp2000_reg_write(IXP2000_T4_CLR, 0); ixp2000_reg_write(IXP2000_T4_CLD, -1); - ixp2000_reg_write(IXP2000_T4_CTL, (1 << 7)); + ixp2000_reg_wrb(IXP2000_T4_CTL, (1 << 7)); missing_jiffy_timer_csr = IXP2000_T4_CSR; } else { ixp2000_reg_write(IXP2000_T2_CLR, 0); ixp2000_reg_write(IXP2000_T2_CLD, -1); - ixp2000_reg_write(IXP2000_T2_CTL, (1 << 7)); + ixp2000_reg_wrb(IXP2000_T2_CTL, (1 << 7)); missing_jiffy_timer_csr = IXP2000_T2_CSR; } next_jiffy_time = 0xffffffff; @@ -279,7 +269,7 @@ static void update_gpio_int_csrs(void) ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge); ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge); ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low); - ixp2000_reg_write(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high); + ixp2000_reg_wrb(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high); } void gpio_line_config(int line, int direction) @@ -297,9 +287,9 @@ void gpio_line_config(int line, int direction) GPIO_IRQ_level_high &= ~(1 << line); update_gpio_int_csrs(); - ixp2000_reg_write(IXP2000_GPIO_PDSR, 1 << line); + ixp2000_reg_wrb(IXP2000_GPIO_PDSR, 1 << line); } else if (direction == GPIO_IN) { - ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line); + ixp2000_reg_wrb(IXP2000_GPIO_PDCR, 1 << line); } local_irq_restore(flags); } @@ -365,12 +355,12 @@ static void ixp2000_GPIO_irq_mask_ack(unsigned int irq) ixp2000_reg_write(IXP2000_GPIO_EDSR, (1 << (irq - IRQ_IXP2000_GPIO0))); ixp2000_reg_write(IXP2000_GPIO_LDSR, (1 << (irq - IRQ_IXP2000_GPIO0))); - ixp2000_reg_write(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0))); + ixp2000_reg_wrb(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0))); } static void ixp2000_GPIO_irq_mask(unsigned int irq) { - ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0))); + ixp2000_reg_wrb(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0))); } static void ixp2000_GPIO_irq_unmask(unsigned int irq) @@ -389,9 +379,9 @@ static void ixp2000_pci_irq_mask(unsigned int irq) { unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE; if (irq == IRQ_IXP2000_PCIA) - ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 26))); + ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 26))); else if (irq == IRQ_IXP2000_PCIB) - ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 27))); + ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 27))); } static void ixp2000_pci_irq_unmask(unsigned int irq) @@ -403,6 +393,40 @@ static void ixp2000_pci_irq_unmask(unsigned int irq) ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 27))); } +/* + * Error interrupts. These are used extensively by the microengine drivers + */ +static void ixp2000_err_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) +{ + int i; + unsigned long status = *IXP2000_IRQ_ERR_STATUS; + + for(i = 31; i >= 0; i--) { + if(status & (1 << i)) { + desc = irq_desc + IRQ_IXP2000_DRAM0_MIN_ERR + i; + desc->handle(IRQ_IXP2000_DRAM0_MIN_ERR + i, desc, regs); + } + } +} + +static void ixp2000_err_irq_mask(unsigned int irq) +{ + ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_CLR, + (1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR))); +} + +static void ixp2000_err_irq_unmask(unsigned int irq) +{ + ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_SET, + (1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR))); +} + +static struct irqchip ixp2000_err_irq_chip = { + .ack = ixp2000_err_irq_mask, + .mask = ixp2000_err_irq_mask, + .unmask = ixp2000_err_irq_unmask +}; + static struct irqchip ixp2000_pci_irq_chip = { .ack = ixp2000_pci_irq_mask, .mask = ixp2000_pci_irq_mask, @@ -411,7 +435,7 @@ static struct irqchip ixp2000_pci_irq_chip = { static void ixp2000_irq_mask(unsigned int irq) { - ixp2000_reg_write(IXP2000_IRQ_ENABLE_CLR, (1 << irq)); + ixp2000_reg_wrb(IXP2000_IRQ_ENABLE_CLR, (1 << irq)); } static void ixp2000_irq_unmask(unsigned int irq) @@ -443,7 +467,7 @@ void __init ixp2000_init_irq(void) ixp2000_reg_write(IXP2000_GPIO_INCR, -1); /* clear PCI interrupt sources */ - ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, 0); + ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, 0); /* * Certain bits in the IRQ status register of the @@ -460,6 +484,18 @@ void __init ixp2000_init_irq(void) } else set_irq_flags(irq, 0); } + for (irq = IRQ_IXP2000_DRAM0_MIN_ERR; irq <= IRQ_IXP2000_SP_INT; irq++) { + if((1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)) & + IXP2000_VALID_ERR_IRQ_MASK) { + set_irq_chip(irq, &ixp2000_err_irq_chip); + set_irq_handler(irq, do_level_IRQ); + set_irq_flags(irq, IRQF_VALID); + } + else + set_irq_flags(irq, 0); + } + set_irq_chained_handler(IRQ_IXP2000_ERRSUM, ixp2000_err_irq_handler); + /* * GPIO IRQs are invalid until someone sets the interrupt mode * by calling set_irq_type(). diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c index 643f5e1..61f6006 100644 --- a/arch/arm/mach-ixp2000/enp2611.c +++ b/arch/arm/mach-ixp2000/enp2611.c @@ -64,6 +64,35 @@ static struct sys_timer enp2611_timer = { /************************************************************************* + * ENP-2611 I/O + *************************************************************************/ +static struct map_desc enp2611_io_desc[] __initdata = { + { + .virtual = ENP2611_CALEB_VIRT_BASE, + .pfn = __phys_to_pfn(ENP2611_CALEB_PHYS_BASE), + .length = ENP2611_CALEB_SIZE, + .type = MT_IXP2000_DEVICE, + }, { + .virtual = ENP2611_PM3386_0_VIRT_BASE, + .pfn = __phys_to_pfn(ENP2611_PM3386_0_PHYS_BASE), + .length = ENP2611_PM3386_0_SIZE, + .type = MT_IXP2000_DEVICE, + }, { + .virtual = ENP2611_PM3386_1_VIRT_BASE, + .pfn = __phys_to_pfn(ENP2611_PM3386_1_PHYS_BASE), + .length = ENP2611_PM3386_1_SIZE, + .type = MT_IXP2000_DEVICE, + } +}; + +void __init enp2611_map_io(void) +{ + ixp2000_map_io(); + iotable_init(enp2611_io_desc, ARRAY_SIZE(enp2611_io_desc)); +} + + +/************************************************************************* * ENP-2611 PCI *************************************************************************/ static int enp2611_pci_setup(int nr, struct pci_sys_data *sys) @@ -229,7 +258,7 @@ MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board") .phys_io = IXP2000_UART_PHYS_BASE, .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, - .map_io = ixp2000_map_io, + .map_io = enp2611_map_io, .init_irq = ixp2000_init_irq, .timer = &enp2611_timer, .init_machine = enp2611_init_machine, diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c index 05dfcb4..d628da5 100644 --- a/arch/arm/mach-ixp2000/ixdp2x00.c +++ b/arch/arm/mach-ixp2000/ixdp2x00.c @@ -81,7 +81,7 @@ static void ixdp2x00_irq_mask(unsigned int irq) dummy = *board_irq_mask; dummy |= IXP2000_BOARD_IRQ_MASK(irq); - ixp2000_reg_write(board_irq_mask, dummy); + ixp2000_reg_wrb(board_irq_mask, dummy); #ifdef CONFIG_ARCH_IXDP2400 if (machine_is_ixdp2400()) @@ -101,7 +101,7 @@ static void ixdp2x00_irq_unmask(unsigned int irq) dummy = *board_irq_mask; dummy &= ~IXP2000_BOARD_IRQ_MASK(irq); - ixp2000_reg_write(board_irq_mask, dummy); + ixp2000_reg_wrb(board_irq_mask, dummy); if (machine_is_ixdp2400()) ixp2000_release_slowport(&old_cfg); diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index b212499..e6a882f 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -51,7 +51,7 @@ *************************************************************************/ static void ixdp2x01_irq_mask(unsigned int irq) { - ixp2000_reg_write(IXDP2X01_INT_MASK_SET_REG, + ixp2000_reg_wrb(IXDP2X01_INT_MASK_SET_REG, IXP2000_BOARD_IRQ_MASK(irq)); } @@ -114,7 +114,7 @@ void __init ixdp2x01_init_irq(void) /* Mask all interrupts from CPLD, disable simulation */ ixp2000_reg_write(IXDP2X01_INT_MASK_SET_REG, 0xffffffff); - ixp2000_reg_write(IXDP2X01_INT_SIM_REG, 0); + ixp2000_reg_wrb(IXDP2X01_INT_SIM_REG, 0); for (irq = NR_IXP2000_IRQS; irq < NR_IXDP2X01_IRQS; irq++) { if (irq & valid_irq_mask) { @@ -299,7 +299,6 @@ struct hw_pci ixdp2x01_pci __initdata = { int __init ixdp2x01_pci_init(void) { - pci_common_init(&ixdp2x01_pci); return 0; } @@ -316,7 +315,7 @@ static struct flash_platform_data ixdp2x01_flash_platform_data = { static unsigned long ixdp2x01_flash_bank_setup(unsigned long ofs) { - ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG, + ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG, ((ofs >> IXDP2X01_FLASH_WINDOW_BITS) | IXDP2X01_CPLD_FLASH_INTERN)); return (ofs & IXDP2X01_FLASH_WINDOW_MASK); } @@ -363,7 +362,7 @@ static struct platform_device *ixdp2x01_devices[] __initdata = { static void __init ixdp2x01_init_machine(void) { - ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG, + ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG, (IXDP2X01_CPLD_FLASH_BANK_MASK | IXDP2X01_CPLD_FLASH_INTERN)); ixdp2x01_flash_data.nr_banks = diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c index 522205a..d4bf1e1 100644 --- a/arch/arm/mach-ixp2000/pci.c +++ b/arch/arm/mach-ixp2000/pci.c @@ -148,7 +148,7 @@ int ixp2000_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_re local_irq_save(flags); temp = *(IXP2000_PCI_CONTROL); if (temp & ((1 << 8) | (1 << 5))) { - ixp2000_reg_write(IXP2000_PCI_CONTROL, temp); + ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp); } temp = *(IXP2000_PCI_CMDSTAT); @@ -178,8 +178,8 @@ clear_master_aborts(void) local_irq_save(flags); temp = *(IXP2000_PCI_CONTROL); - if (temp & ((1 << 8) | (1 << 5))) { - ixp2000_reg_write(IXP2000_PCI_CONTROL, temp); + if (temp & ((1 << 8) | (1 << 5))) { + ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp); } temp = *(IXP2000_PCI_CMDSTAT); diff --git a/arch/arm/mach-ixp2000/uengine.c b/arch/arm/mach-ixp2000/uengine.c new file mode 100644 index 0000000..ec4e007 --- /dev/null +++ b/arch/arm/mach-ixp2000/uengine.c @@ -0,0 +1,473 @@ +/* + * Generic library functions for the microengines found on the Intel + * IXP2000 series of network processors. + * + * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as + * published by the Free Software Foundation; either version 2.1 of the + * License, or (at your option) any later version. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/string.h> +#include <asm/hardware.h> +#include <asm/arch/ixp2000-regs.h> +#include <asm/arch/uengine.h> +#include <asm/io.h> + +#define USTORE_ADDRESS 0x000 +#define USTORE_DATA_LOWER 0x004 +#define USTORE_DATA_UPPER 0x008 +#define CTX_ENABLES 0x018 +#define CC_ENABLE 0x01c +#define CSR_CTX_POINTER 0x020 +#define INDIRECT_CTX_STS 0x040 +#define ACTIVE_CTX_STS 0x044 +#define INDIRECT_CTX_SIG_EVENTS 0x048 +#define INDIRECT_CTX_WAKEUP_EVENTS 0x050 +#define NN_PUT 0x080 +#define NN_GET 0x084 +#define TIMESTAMP_LOW 0x0c0 +#define TIMESTAMP_HIGH 0x0c4 +#define T_INDEX_BYTE_INDEX 0x0f4 +#define LOCAL_CSR_STATUS 0x180 + +u32 ixp2000_uengine_mask; + +static void *ixp2000_uengine_csr_area(int uengine) +{ + return ((void *)IXP2000_UENGINE_CSR_VIRT_BASE) + (uengine << 10); +} + +/* + * LOCAL_CSR_STATUS=1 after a read or write to a microengine's CSR + * space means that the microengine we tried to access was also trying + * to access its own CSR space on the same clock cycle as we did. When + * this happens, we lose the arbitration process by default, and the + * read or write we tried to do was not actually performed, so we try + * again until it succeeds. + */ +u32 ixp2000_uengine_csr_read(int uengine, int offset) +{ + void *uebase; + u32 *local_csr_status; + u32 *reg; + u32 value; + + uebase = ixp2000_uengine_csr_area(uengine); + + local_csr_status = (u32 *)(uebase + LOCAL_CSR_STATUS); + reg = (u32 *)(uebase + offset); + do { + value = ixp2000_reg_read(reg); + } while (ixp2000_reg_read(local_csr_status) & 1); + + return value; +} +EXPORT_SYMBOL(ixp2000_uengine_csr_read); + +void ixp2000_uengine_csr_write(int uengine, int offset, u32 value) +{ + void *uebase; + u32 *local_csr_status; + u32 *reg; + + uebase = ixp2000_uengine_csr_area(uengine); + + local_csr_status = (u32 *)(uebase + LOCAL_CSR_STATUS); + reg = (u32 *)(uebase + offset); + do { + ixp2000_reg_write(reg, value); + } while (ixp2000_reg_read(local_csr_status) & 1); +} +EXPORT_SYMBOL(ixp2000_uengine_csr_write); + +void ixp2000_uengine_reset(u32 uengine_mask) +{ + ixp2000_reg_wrb(IXP2000_RESET1, uengine_mask & ixp2000_uengine_mask); + ixp2000_reg_wrb(IXP2000_RESET1, 0); +} +EXPORT_SYMBOL(ixp2000_uengine_reset); + +void ixp2000_uengine_set_mode(int uengine, u32 mode) +{ + /* + * CTL_STR_PAR_EN: unconditionally enable parity checking on + * control store. + */ + mode |= 0x10000000; + ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mode); + + /* + * Enable updating of condition codes. + */ + ixp2000_uengine_csr_write(uengine, CC_ENABLE, 0x00002000); + + /* + * Initialise other per-microengine registers. + */ + ixp2000_uengine_csr_write(uengine, NN_PUT, 0x00); + ixp2000_uengine_csr_write(uengine, NN_GET, 0x00); + ixp2000_uengine_csr_write(uengine, T_INDEX_BYTE_INDEX, 0); +} +EXPORT_SYMBOL(ixp2000_uengine_set_mode); + +static int make_even_parity(u32 x) +{ + return hweight32(x) & 1; +} + +static void ustore_write(int uengine, u64 insn) +{ + /* + * Generate even parity for top and bottom 20 bits. + */ + insn |= (u64)make_even_parity((insn >> 20) & 0x000fffff) << 41; + insn |= (u64)make_even_parity(insn & 0x000fffff) << 40; + + /* + * Write to microstore. The second write auto-increments + * the USTORE_ADDRESS index register. + */ + ixp2000_uengine_csr_write(uengine, USTORE_DATA_LOWER, (u32)insn); + ixp2000_uengine_csr_write(uengine, USTORE_DATA_UPPER, (u32)(insn >> 32)); +} + +void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns) +{ + int i; + + /* + * Start writing to microstore at address 0. + */ + ixp2000_uengine_csr_write(uengine, USTORE_ADDRESS, 0x80000000); + for (i = 0; i < insns; i++) { + u64 insn; + + insn = (((u64)ucode[0]) << 32) | + (((u64)ucode[1]) << 24) | + (((u64)ucode[2]) << 16) | + (((u64)ucode[3]) << 8) | + ((u64)ucode[4]); + ucode += 5; + + ustore_write(uengine, insn); + } + + /* + * Pad with a few NOPs at the end (to avoid the microengine + * aborting as it prefetches beyond the last instruction), unless + * we run off the end of the instruction store first, at which + * point the address register will wrap back to zero. + */ + for (i = 0; i < 4; i++) { + u32 addr; + + addr = ixp2000_uengine_csr_read(uengine, USTORE_ADDRESS); + if (addr == 0x80000000) + break; + ustore_write(uengine, 0xf0000c0300ULL); + } + + /* + * End programming. + */ + ixp2000_uengine_csr_write(uengine, USTORE_ADDRESS, 0x00000000); +} +EXPORT_SYMBOL(ixp2000_uengine_load_microcode); + +void ixp2000_uengine_init_context(int uengine, int context, int pc) +{ + /* + * Select the right context for indirect access. + */ + ixp2000_uengine_csr_write(uengine, CSR_CTX_POINTER, context); + + /* + * Initialise signal masks to immediately go to Ready state. + */ + ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_SIG_EVENTS, 1); + ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_WAKEUP_EVENTS, 1); + + /* + * Set program counter. + */ + ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_STS, pc); +} +EXPORT_SYMBOL(ixp2000_uengine_init_context); + +void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask) +{ + u32 mask; + + /* + * Enable the specified context to go to Executing state. + */ + mask = ixp2000_uengine_csr_read(uengine, CTX_ENABLES); + mask |= ctx_mask << 8; + ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mask); +} +EXPORT_SYMBOL(ixp2000_uengine_start_contexts); + +void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask) +{ + u32 mask; + + /* + * Disable the Ready->Executing transition. Note that this + * does not stop the context until it voluntarily yields. + */ + mask = ixp2000_uengine_csr_read(uengine, CTX_ENABLES); + mask &= ~(ctx_mask << 8); + ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mask); +} +EXPORT_SYMBOL(ixp2000_uengine_stop_contexts); + +static int check_ixp_type(struct ixp2000_uengine_code *c) +{ + u32 product_id; + u32 rev; + + product_id = ixp2000_reg_read(IXP2000_PRODUCT_ID); + if (((product_id >> 16) & 0x1f) != 0) + return 0; + + switch ((product_id >> 8) & 0xff) { + case 0: /* IXP2800 */ + if (!(c->cpu_model_bitmask & 4)) + return 0; + break; + + case 1: /* IXP2850 */ + if (!(c->cpu_model_bitmask & 8)) + return 0; + break; + + case 2: /* IXP2400 */ + if (!(c->cpu_model_bitmask & 2)) + return 0; + break; + + default: + return 0; + } + + rev = product_id & 0xff; + if (rev < c->cpu_min_revision || rev > c->cpu_max_revision) + return 0; + + return 1; +} + +static void generate_ucode(u8 *ucode, u32 *gpr_a, u32 *gpr_b) +{ + int offset; + int i; + + offset = 0; + + for (i = 0; i < 128; i++) { + u8 b3; + u8 b2; + u8 b1; + u8 b0; + + b3 = (gpr_a[i] >> 24) & 0xff; + b2 = (gpr_a[i] >> 16) & 0xff; + b1 = (gpr_a[i] >> 8) & 0xff; + b0 = gpr_a[i] & 0xff; + + // immed[@ai, (b1 << 8) | b0] + // 11110000 0000VVVV VVVV11VV VVVVVV00 1IIIIIII + ucode[offset++] = 0xf0; + ucode[offset++] = (b1 >> 4); + ucode[offset++] = (b1 << 4) | 0x0c | (b0 >> 6); + ucode[offset++] = (b0 << 2); + ucode[offset++] = 0x80 | i; + + // immed_w1[@ai, (b3 << 8) | b2] + // 11110100 0100VVVV VVVV11VV VVVVVV00 1IIIIIII + ucode[offset++] = 0xf4; + ucode[offset++] = 0x40 | (b3 >> 4); + ucode[offset++] = (b3 << 4) | 0x0c | (b2 >> 6); + ucode[offset++] = (b2 << 2); + ucode[offset++] = 0x80 | i; + } + + for (i = 0; i < 128; i++) { + u8 b3; + u8 b2; + u8 b1; + u8 b0; + + b3 = (gpr_b[i] >> 24) & 0xff; + b2 = (gpr_b[i] >> 16) & 0xff; + b1 = (gpr_b[i] >> 8) & 0xff; + b0 = gpr_b[i] & 0xff; + + // immed[@bi, (b1 << 8) | b0] + // 11110000 0000VVVV VVVV001I IIIIII11 VVVVVVVV + ucode[offset++] = 0xf0; + ucode[offset++] = (b1 >> 4); + ucode[offset++] = (b1 << 4) | 0x02 | (i >> 6); + ucode[offset++] = (i << 2) | 0x03; + ucode[offset++] = b0; + + // immed_w1[@bi, (b3 << 8) | b2] + // 11110100 0100VVVV VVVV001I IIIIII11 VVVVVVVV + ucode[offset++] = 0xf4; + ucode[offset++] = 0x40 | (b3 >> 4); + ucode[offset++] = (b3 << 4) | 0x02 | (i >> 6); + ucode[offset++] = (i << 2) | 0x03; + ucode[offset++] = b2; + } + + // ctx_arb[kill] + ucode[offset++] = 0xe0; + ucode[offset++] = 0x00; + ucode[offset++] = 0x01; + ucode[offset++] = 0x00; + ucode[offset++] = 0x00; +} + +static int set_initial_registers(int uengine, struct ixp2000_uengine_code *c) +{ + int per_ctx_regs; + u32 *gpr_a; + u32 *gpr_b; + u8 *ucode; + int i; + + gpr_a = kmalloc(128 * sizeof(u32), GFP_KERNEL); + gpr_b = kmalloc(128 * sizeof(u32), GFP_KERNEL); + ucode = kmalloc(513 * 5, GFP_KERNEL); + if (gpr_a == NULL || gpr_b == NULL || ucode == NULL) { + kfree(ucode); + kfree(gpr_b); + kfree(gpr_a); + return 1; + } + + per_ctx_regs = 16; + if (c->uengine_parameters & IXP2000_UENGINE_4_CONTEXTS) + per_ctx_regs = 32; + + memset(gpr_a, 0, sizeof(gpr_a)); + memset(gpr_b, 0, sizeof(gpr_b)); + for (i = 0; i < 256; i++) { + struct ixp2000_reg_value *r = c->initial_reg_values + i; + u32 *bank; + int inc; + int j; + + if (r->reg == -1) + break; + + bank = (r->reg & 0x400) ? gpr_b : gpr_a; + inc = (r->reg & 0x80) ? 128 : per_ctx_regs; + + j = r->reg & 0x7f; + while (j < 128) { + bank[j] = r->value; + j += inc; + } + } + + generate_ucode(ucode, gpr_a, gpr_b); + ixp2000_uengine_load_microcode(uengine, ucode, 513); + ixp2000_uengine_init_context(uengine, 0, 0); + ixp2000_uengine_start_contexts(uengine, 0x01); + for (i = 0; i < 100; i++) { + u32 status; + + status = ixp2000_uengine_csr_read(uengine, ACTIVE_CTX_STS); + if (!(status & 0x80000000)) + break; + } + ixp2000_uengine_stop_contexts(uengine, 0x01); + + kfree(ucode); + kfree(gpr_b); + kfree(gpr_a); + + return !!(i == 100); +} + +int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c) +{ + int ctx; + + if (!check_ixp_type(c)) + return 1; + + if (!(ixp2000_uengine_mask & (1 << uengine))) + return 1; + + ixp2000_uengine_reset(1 << uengine); + ixp2000_uengine_set_mode(uengine, c->uengine_parameters); + if (set_initial_registers(uengine, c)) + return 1; + ixp2000_uengine_load_microcode(uengine, c->insns, c->num_insns); + + for (ctx = 0; ctx < 8; ctx++) + ixp2000_uengine_init_context(uengine, ctx, 0); + + return 0; +} +EXPORT_SYMBOL(ixp2000_uengine_load); + + +static int __init ixp2000_uengine_init(void) +{ + int uengine; + u32 value; + + /* + * Determine number of microengines present. + */ + switch ((ixp2000_reg_read(IXP2000_PRODUCT_ID) >> 8) & 0x1fff) { + case 0: /* IXP2800 */ + case 1: /* IXP2850 */ + ixp2000_uengine_mask = 0x00ff00ff; + break; + + case 2: /* IXP2400 */ + ixp2000_uengine_mask = 0x000f000f; + break; + + default: + printk(KERN_INFO "Detected unknown IXP2000 model (%.8x)\n", + (unsigned int)ixp2000_reg_read(IXP2000_PRODUCT_ID)); + ixp2000_uengine_mask = 0x00000000; + break; + } + + /* + * Reset microengines. + */ + ixp2000_uengine_reset(ixp2000_uengine_mask); + + /* + * Synchronise timestamp counters across all microengines. + */ + value = ixp2000_reg_read(IXP2000_MISC_CONTROL); + ixp2000_reg_wrb(IXP2000_MISC_CONTROL, value & ~0x80); + for (uengine = 0; uengine < 32; uengine++) { + if (ixp2000_uengine_mask & (1 << uengine)) { + ixp2000_uengine_csr_write(uengine, TIMESTAMP_LOW, 0); + ixp2000_uengine_csr_write(uengine, TIMESTAMP_HIGH, 0); + } + } + ixp2000_reg_wrb(IXP2000_MISC_CONTROL, value | 0x80); + + return 0; +} + +subsys_initcall(ixp2000_uengine_init); diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index 2b54436..9795da2 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -427,7 +427,7 @@ void __init ixp4xx_pci_preinit(void) #ifdef __ARMEB__ *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS; #else - *PCI_CSR = PCI_CSR_IC; + *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE; #endif pr_debug("DONE\n"); diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c index be283cd..399010c 100644 --- a/arch/arm/mach-omap1/leds-h2p2-debug.c +++ b/arch/arm/mach-omap1/leds-h2p2-debug.c @@ -13,7 +13,6 @@ #include <linux/init.h> #include <linux/kernel_stat.h> #include <linux/sched.h> -#include <linux/version.h> #include <asm/io.h> #include <asm/hardware.h> diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 3e5f69b..b380a438 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -27,7 +27,8 @@ config PXA_SHARPSL Say Y here if you intend to run this kernel on a Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita), - SL-C3000 (Spitz) or SL-C3100 (Borzoi) handheld computer. + SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) + handheld computer. endchoice @@ -37,7 +38,7 @@ choice prompt "Select target Sharp Zaurus device range" config PXA_SHARPSL_25x - bool "Sharp PXA25x models (SL-5600 and SL-C7xx)" + bool "Sharp PXA25x models (SL-5600, SL-C7xx and SL-C6000x)" select PXA25x config PXA_SHARPSL_27x @@ -80,6 +81,10 @@ config MACH_BORZOI depends PXA_SHARPSL_27x select PXA_SHARP_Cxx00 +config MACH_TOSA + bool "Enable Sharp SL-6000x (Tosa) Support" + depends PXA_SHARPSL + config PXA25x bool help diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index f609a0f..8bc72d0 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_PXA_IDP) += idp.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o ssp.o obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o ssp.o obj-$(CONFIG_MACH_POODLE) += poodle.o +obj-$(CONFIG_MACH_TOSA) += tosa.o # Support for blinky lights led-y := leds.o diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index eb5f6d74..100fb31 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -62,6 +62,37 @@ static struct scoop_config corgi_scoop_setup = { .io_out = CORGI_SCOOP_IO_OUT, }; +struct platform_device corgiscoop_device = { + .name = "sharp-scoop", + .id = -1, + .dev = { + .platform_data = &corgi_scoop_setup, + }, + .num_resources = ARRAY_SIZE(corgi_scoop_resources), + .resource = corgi_scoop_resources, +}; + +static void corgi_pcmcia_init(void) +{ + /* Setup default state of GPIO outputs + before we enable them as outputs. */ + GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | + GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | + GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) | + GPIO_bit(GPIO53_nPCE_2); + + pxa_gpio_mode(GPIO48_nPOE_MD); + pxa_gpio_mode(GPIO49_nPWE_MD); + pxa_gpio_mode(GPIO50_nPIOR_MD); + pxa_gpio_mode(GPIO51_nPIOW_MD); + pxa_gpio_mode(GPIO55_nPREG_MD); + pxa_gpio_mode(GPIO56_nPWAIT_MD); + pxa_gpio_mode(GPIO57_nIOIS16_MD); + pxa_gpio_mode(GPIO52_nPCE_1_MD); + pxa_gpio_mode(GPIO53_nPCE_2_MD); + pxa_gpio_mode(GPIO54_pSKTSEL_MD); +} + static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = { { .dev = &corgiscoop_device.dev, @@ -71,16 +102,14 @@ static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = { }, }; -struct platform_device corgiscoop_device = { - .name = "sharp-scoop", - .id = -1, - .dev = { - .platform_data = &corgi_scoop_setup, - }, - .num_resources = ARRAY_SIZE(corgi_scoop_resources), - .resource = corgi_scoop_resources, +static struct scoop_pcmcia_config corgi_pcmcia_config = { + .devs = &corgi_pcmcia_scoop[0], + .num_devs = 1, + .pcmcia_init = corgi_pcmcia_init, }; +EXPORT_SYMBOL(corgiscoop_device); + /* * Corgi SSP Device @@ -294,8 +323,7 @@ static void __init corgi_init(void) pxa_set_mci_info(&corgi_mci_platform_data); pxa_set_ficp_info(&corgi_ficp_platform_data); - scoop_num = 1; - scoop_devs = &corgi_pcmcia_scoop[0]; + platform_scoop_config = &corgi_pcmcia_config; platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c index 54162ba..698eb06 100644 --- a/arch/arm/mach-pxa/corgi_lcd.c +++ b/arch/arm/mach-pxa/corgi_lcd.c @@ -19,6 +19,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/module.h> +#include <linux/string.h> #include <asm/arch/akita.h> #include <asm/arch/corgi.h> #include <asm/arch/hardware.h> diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 1f6857d..b464bc8 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -19,16 +19,20 @@ #include <linux/major.h> #include <linux/fb.h> #include <linux/interrupt.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> #include <asm/hardware.h> #include <asm/irq.h> +#include <asm/sizes.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> +#include <asm/mach/flash.h> #include <asm/hardware/sa1111.h> @@ -175,7 +179,7 @@ static struct platform_device sa1111_device = { static struct resource smc91x_resources[] = { [0] = { .name = "smc91x-regs", - .start = 0x0c000000, + .start = 0x0c000c00, .end = 0x0c0fffff, .flags = IORESOURCE_MEM, }, @@ -199,10 +203,75 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; +static struct resource flash_resources[] = { + [0] = { + .start = 0x00000000, + .end = SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0x04000000, + .end = 0x04000000 + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct mtd_partition lubbock_partitions[] = { + { + .name = "Bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_WRITEABLE /* force read-only */ + },{ + .name = "Kernel", + .size = 0x00100000, + .offset = 0x00040000, + },{ + .name = "Filesystem", + .size = MTDPART_SIZ_FULL, + .offset = 0x00140000 + } +}; + +static struct flash_platform_data lubbock_flash_data[2] = { + { + .map_name = "cfi_probe", + .parts = lubbock_partitions, + .nr_parts = ARRAY_SIZE(lubbock_partitions), + }, { + .map_name = "cfi_probe", + .parts = NULL, + .nr_parts = 0, + } +}; + +static struct platform_device lubbock_flash_device[2] = { + { + .name = "pxa2xx-flash", + .id = 0, + .dev = { + .platform_data = &lubbock_flash_data[0], + }, + .resource = &flash_resources[0], + .num_resources = 1, + }, + { + .name = "pxa2xx-flash", + .id = 1, + .dev = { + .platform_data = &lubbock_flash_data[1], + }, + .resource = &flash_resources[1], + .num_resources = 1, + }, +}; + static struct platform_device *devices[] __initdata = { &sa1111_device, &lub_audio_device, &smc91x_device, + &lubbock_flash_device[0], + &lubbock_flash_device[1], }; static struct pxafb_mach_info sharp_lm8v31 __initdata = { @@ -224,18 +293,75 @@ static struct pxafb_mach_info sharp_lm8v31 __initdata = { .lccr3 = LCCR3_PCP | LCCR3_Acb(255), }; -static int lubbock_mci_init(struct device *dev, irqreturn_t (*lubbock_detect_int)(int, void *, struct pt_regs *), void *data) +#define MMC_POLL_RATE msecs_to_jiffies(1000) + +static void lubbock_mmc_poll(unsigned long); +static irqreturn_t (*mmc_detect_int)(int, void *, struct pt_regs *); + +static struct timer_list mmc_timer = { + .function = lubbock_mmc_poll, +}; + +static void lubbock_mmc_poll(unsigned long data) +{ + unsigned long flags; + + /* clear any previous irq state, then ... */ + local_irq_save(flags); + LUB_IRQ_SET_CLR &= ~(1 << 0); + local_irq_restore(flags); + + /* poll until mmc/sd card is removed */ + if (LUB_IRQ_SET_CLR & (1 << 0)) + mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE); + else { + (void) mmc_detect_int(LUBBOCK_SD_IRQ, (void *)data, NULL); + enable_irq(LUBBOCK_SD_IRQ); + } +} + +static irqreturn_t lubbock_detect_int(int irq, void *data, struct pt_regs *regs) +{ + /* IRQ is level triggered; disable, and poll for removal */ + disable_irq(irq); + mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE); + + return mmc_detect_int(irq, data, regs); +} + +static int lubbock_mci_init(struct device *dev, + irqreturn_t (*detect_int)(int, void *, struct pt_regs *), + void *data) { /* setup GPIO for PXA25x MMC controller */ pxa_gpio_mode(GPIO6_MMCCLK_MD); pxa_gpio_mode(GPIO8_MMCCS0_MD); - return 0; + /* detect card insert/eject */ + mmc_detect_int = detect_int; + init_timer(&mmc_timer); + mmc_timer.data = (unsigned long) data; + return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int, + SA_SAMPLE_RANDOM, "lubbock-sd-detect", data); +} + +static int lubbock_mci_get_ro(struct device *dev) +{ + return (LUB_MISC_RD & (1 << 2)) != 0; +} + +static void lubbock_mci_exit(struct device *dev, void *data) +{ + free_irq(LUBBOCK_SD_IRQ, data); + del_timer_sync(&mmc_timer); } static struct pxamci_platform_data lubbock_mci_platform_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .detect_delay = 1, .init = lubbock_mci_init, + .get_ro = lubbock_mci_get_ro, + .exit = lubbock_mci_exit, }; static void lubbock_irda_transceiver_mode(struct device *dev, int mode) @@ -258,10 +384,21 @@ static struct pxaficp_platform_data lubbock_ficp_platform_data = { static void __init lubbock_init(void) { + int flashboot = (LUB_CONF_SWITCHES & 1); + pxa_set_udc_info(&udc_info); set_pxa_fb_info(&sharp_lm8v31); pxa_set_mci_info(&lubbock_mci_platform_data); pxa_set_ficp_info(&lubbock_ficp_platform_data); + + lubbock_flash_data[0].width = lubbock_flash_data[1].width = + (BOOT_DEF & 1) ? 2 : 4; + /* Compensate for the nROMBT switch which swaps the flash banks */ + printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n", + flashboot?"Flash":"ROM", flashboot); + + lubbock_flash_data[flashboot^1].name = "application-flash"; + lubbock_flash_data[flashboot].name = "boot-rom"; (void) platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 887a8cb..07892f4 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -20,6 +20,9 @@ #include <linux/sched.h> #include <linux/bitops.h> #include <linux/fb.h> +#include <linux/ioport.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> #include <asm/types.h> #include <asm/setup.h> @@ -27,10 +30,12 @@ #include <asm/mach-types.h> #include <asm/hardware.h> #include <asm/irq.h> +#include <asm/sizes.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> +#include <asm/mach/flash.h> #include <asm/arch/pxa-regs.h> #include <asm/arch/mainstone.h> @@ -190,6 +195,69 @@ static struct platform_device mst_audio_device = { .dev = { .platform_data = &mst_audio_ops }, }; +static struct resource flash_resources[] = { + [0] = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PXA_CS1_PHYS, + .end = PXA_CS1_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct mtd_partition mainstoneflash0_partitions[] = { + { + .name = "Bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_WRITEABLE /* force read-only */ + },{ + .name = "Kernel", + .size = 0x00400000, + .offset = 0x00040000, + },{ + .name = "Filesystem", + .size = MTDPART_SIZ_FULL, + .offset = 0x00440000 + } +}; + +static struct flash_platform_data mst_flash_data[2] = { + { + .map_name = "cfi_probe", + .parts = mainstoneflash0_partitions, + .nr_parts = ARRAY_SIZE(mainstoneflash0_partitions), + }, { + .map_name = "cfi_probe", + .parts = NULL, + .nr_parts = 0, + } +}; + +static struct platform_device mst_flash_device[2] = { + { + .name = "pxa2xx-flash", + .id = 0, + .dev = { + .platform_data = &mst_flash_data[0], + }, + .resource = &flash_resources[0], + .num_resources = 1, + }, + { + .name = "pxa2xx-flash", + .id = 1, + .dev = { + .platform_data = &mst_flash_data[1], + }, + .resource = &flash_resources[1], + .num_resources = 1, + }, +}; + static void mainstone_backlight_power(int on) { if (on) { @@ -318,16 +386,34 @@ static struct pxaficp_platform_data mainstone_ficp_platform_data = { .transceiver_mode = mainstone_irda_transceiver_mode, }; +static struct platform_device *platform_devices[] __initdata = { + &smc91x_device, + &mst_audio_device, + &mst_flash_device[0], + &mst_flash_device[1], +}; + static void __init mainstone_init(void) { + int SW7 = 0; /* FIXME: get from SCR (Mst doc section 3.2.1.1) */ + + mst_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4; + mst_flash_data[1].width = 4; + + /* Compensate for SW7 which swaps the flash banks */ + mst_flash_data[SW7].name = "processor-flash"; + mst_flash_data[SW7 ^ 1].name = "mainboard-flash"; + + printk(KERN_NOTICE "Mainstone configured to boot from %s\n", + mst_flash_data[0].name); + /* * On Mainstone, we route AC97_SYSCLK via GPIO45 to * the audio daughter card */ pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD); - platform_device_register(&smc91x_device); - platform_device_register(&mst_audio_device); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); /* reading Mainstone's "Virtual Configuration Register" might be handy to select LCD type here */ diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index ac4dd43..f74b9af 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -12,6 +12,7 @@ */ #include <linux/config.h> #include <linux/init.h> +#include <linux/module.h> #include <linux/suspend.h> #include <linux/errno.h> #include <linux/time.h> @@ -19,6 +20,7 @@ #include <asm/hardware.h> #include <asm/memory.h> #include <asm/system.h> +#include <asm/arch/pm.h> #include <asm/arch/pxa-regs.h> #include <asm/arch/lubbock.h> #include <asm/mach/time.h> @@ -72,7 +74,7 @@ enum { SLEEP_SAVE_START = 0, }; -static int pxa_pm_enter(suspend_state_t state) +int pxa_pm_enter(suspend_state_t state) { unsigned long sleep_save[SLEEP_SAVE_SIZE]; unsigned long checksum = 0; @@ -191,6 +193,8 @@ static int pxa_pm_enter(suspend_state_t state) return 0; } +EXPORT_SYMBOL_GPL(pxa_pm_enter); + unsigned long sleep_phys_sp(void *sp) { return virt_to_phys(sp); @@ -199,21 +203,25 @@ unsigned long sleep_phys_sp(void *sp) /* * Called after processes are frozen, but before we shut down devices. */ -static int pxa_pm_prepare(suspend_state_t state) +int pxa_pm_prepare(suspend_state_t state) { extern int pxa_cpu_pm_prepare(suspend_state_t state); return pxa_cpu_pm_prepare(state); } +EXPORT_SYMBOL_GPL(pxa_pm_prepare); + /* * Called after devices are re-setup, but before processes are thawed. */ -static int pxa_pm_finish(suspend_state_t state) +int pxa_pm_finish(suspend_state_t state) { return 0; } +EXPORT_SYMBOL_GPL(pxa_pm_finish); + /* * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk. */ @@ -230,4 +238,4 @@ static int __init pxa_pm_init(void) return 0; } -late_initcall(pxa_pm_init); +device_initcall(pxa_pm_init); diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index ad6a13f..eef3de2 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -65,6 +65,27 @@ struct platform_device poodle_scoop_device = { .resource = poodle_scoop_resources, }; +static void poodle_pcmcia_init(void) +{ + /* Setup default state of GPIO outputs + before we enable them as outputs. */ + GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | + GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | + GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) | + GPIO_bit(GPIO53_nPCE_2); + + pxa_gpio_mode(GPIO48_nPOE_MD); + pxa_gpio_mode(GPIO49_nPWE_MD); + pxa_gpio_mode(GPIO50_nPIOR_MD); + pxa_gpio_mode(GPIO51_nPIOW_MD); + pxa_gpio_mode(GPIO55_nPREG_MD); + pxa_gpio_mode(GPIO56_nPWAIT_MD); + pxa_gpio_mode(GPIO57_nIOIS16_MD); + pxa_gpio_mode(GPIO52_nPCE_1_MD); + pxa_gpio_mode(GPIO53_nPCE_2_MD); + pxa_gpio_mode(GPIO54_pSKTSEL_MD); +} + static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = { { .dev = &poodle_scoop_device.dev, @@ -74,6 +95,14 @@ static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = { }, }; +static struct scoop_pcmcia_config poodle_pcmcia_config = { + .devs = &poodle_pcmcia_scoop[0], + .num_devs = 1, + .pcmcia_init = poodle_pcmcia_init, +}; + +EXPORT_SYMBOL(poodle_scoop_device); + /* LoCoMo device */ static struct resource locomo_resources[] = { @@ -268,8 +297,7 @@ static void __init poodle_init(void) pxa_set_mci_info(&poodle_mci_platform_data); pxa_set_ficp_info(&poodle_ficp_platform_data); - scoop_num = 1; - scoop_devs = &poodle_pcmcia_scoop[0]; + platform_scoop_config = &poodle_pcmcia_config; ret = platform_add_devices(devices, ARRAY_SIZE(devices)); if (ret) { diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 6c6878c..4e9a699 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -104,6 +104,66 @@ struct platform_device spitzscoop2_device = { .resource = spitz_scoop2_resources, }; +#define SPITZ_PWR_SD 0x01 +#define SPITZ_PWR_CF 0x02 + +/* Power control is shared with between one of the CF slots and SD */ +static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr) +{ + unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR); + + if (new_cpr & 0x0007) { + set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); + if (!(cpr & 0x0002) && !(cpr & 0x0004)) + mdelay(5); + if (device == SPITZ_PWR_CF) + cpr |= 0x0002; + if (device == SPITZ_PWR_SD) + cpr |= 0x0004; + write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr); + } else { + if (device == SPITZ_PWR_CF) + cpr &= ~0x0002; + if (device == SPITZ_PWR_SD) + cpr &= ~0x0004; + write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr); + if (!(cpr & 0x0002) && !(cpr & 0x0004)) { + mdelay(1); + reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); + } + } +} + +static void spitz_pcmcia_init(void) +{ + /* Setup default state of GPIO outputs + before we enable them as outputs. */ + GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | + GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | + GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO54_nPCE_2); + GPSR(GPIO85_nPCE_1) = GPIO_bit(GPIO85_nPCE_1); + + pxa_gpio_mode(GPIO48_nPOE_MD); + pxa_gpio_mode(GPIO49_nPWE_MD); + pxa_gpio_mode(GPIO50_nPIOR_MD); + pxa_gpio_mode(GPIO51_nPIOW_MD); + pxa_gpio_mode(GPIO55_nPREG_MD); + pxa_gpio_mode(GPIO56_nPWAIT_MD); + pxa_gpio_mode(GPIO57_nIOIS16_MD); + pxa_gpio_mode(GPIO85_nPCE_1_MD); + pxa_gpio_mode(GPIO54_nPCE_2_MD); + pxa_gpio_mode(GPIO104_pSKTSEL_MD); +} + +static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr) +{ + /* Only need to override behaviour for slot 0 */ + if (nr == 0) + spitz_card_pwr_ctrl(SPITZ_PWR_CF, cpr); + else + write_scoop_reg(scoop, SCOOP_CPR, cpr); +} + static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = { { .dev = &spitzscoop_device.dev, @@ -117,6 +177,16 @@ static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = { }, }; +static struct scoop_pcmcia_config spitz_pcmcia_config = { + .devs = &spitz_pcmcia_scoop[0], + .num_devs = 2, + .pcmcia_init = spitz_pcmcia_init, + .power_ctrl = spitz_pcmcia_pwr, +}; + +EXPORT_SYMBOL(spitzscoop_device); +EXPORT_SYMBOL(spitzscoop2_device); + /* * Spitz SSP Device @@ -235,27 +305,14 @@ static int spitz_mci_init(struct device *dev, irqreturn_t (*spitz_detect_int)(in return 0; } -/* Power control is shared with one of the CF slots so we have a mess */ static void spitz_mci_setpower(struct device *dev, unsigned int vdd) { struct pxamci_platform_data* p_d = dev->platform_data; - unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR); - - if (( 1 << vdd) & p_d->ocr_mask) { - /* printk(KERN_DEBUG "%s: on\n", __FUNCTION__); */ - set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); - mdelay(2); - write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | 0x04); - } else { - /* printk(KERN_DEBUG "%s: off\n", __FUNCTION__); */ - write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr & ~0x04); - - if (!(cpr | 0x02)) { - mdelay(1); - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); - } - } + if (( 1 << vdd) & p_d->ocr_mask) + spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0004); + else + spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000); } static int spitz_mci_get_ro(struct device *dev) @@ -351,8 +408,8 @@ static void __init common_init(void) static void __init spitz_init(void) { - scoop_num = 2; - scoop_devs = &spitz_pcmcia_scoop[0]; + platform_scoop_config = &spitz_pcmcia_config; + spitz_bl_machinfo.set_bl_intensity = spitz_bl_set_intensity; common_init(); diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 7dad3f1..b9b2057 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -132,11 +132,13 @@ static void __init pxa_timer_init(void) tv.tv_sec = pxa_get_rtc_time(); do_settimeofday(&tv); - OSMR0 = 0; /* set initial match at 0 */ + OIER = 0; /* disable any timer interrupts */ + OSCR = LATCH*2; /* push OSCR out of the way */ + OSMR0 = LATCH; /* set initial match */ OSSR = 0xf; /* clear status on all timers */ setup_irq(IRQ_OST0, &pxa_timer_irq); - OIER |= OIER_E0; /* enable match on timer 0 to cause interrupts */ - OSCR = 0; /* initialize free-running timer, force first match */ + OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */ + OSCR = 0; /* initialize free-running timer */ } #ifdef CONFIG_NO_IDLE_HZ diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c new file mode 100644 index 0000000..c312054 --- /dev/null +++ b/arch/arm/mach-pxa/tosa.c @@ -0,0 +1,306 @@ +/* + * Support for Sharp SL-C6000x PDAs + * Model: (Tosa) + * + * Copyright (c) 2005 Dirk Opfer + * + * Based on code written by Sharp/Lineo for 2.4 kernels + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/major.h> +#include <linux/fs.h> +#include <linux/interrupt.h> +#include <linux/mmc/host.h> + +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/mach-types.h> +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/arch/irda.h> +#include <asm/arch/mmc.h> +#include <asm/arch/udc.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/arch/pxa-regs.h> +#include <asm/arch/irq.h> +#include <asm/arch/tosa.h> + +#include <asm/hardware/scoop.h> +#include <asm/mach/sharpsl_param.h> + +#include "generic.h" + + +/* + * SCOOP Device + */ +static struct resource tosa_scoop_resources[] = { + [0] = { + .start = TOSA_CF_PHYS, + .end = TOSA_CF_PHYS + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct scoop_config tosa_scoop_setup = { + .io_dir = TOSA_SCOOP_IO_DIR, + .io_out = TOSA_SCOOP_IO_OUT, + +}; + +struct platform_device tosascoop_device = { + .name = "sharp-scoop", + .id = 0, + .dev = { + .platform_data = &tosa_scoop_setup, + }, + .num_resources = ARRAY_SIZE(tosa_scoop_resources), + .resource = tosa_scoop_resources, +}; + + +/* + * SCOOP Device Jacket + */ +static struct resource tosa_scoop_jc_resources[] = { + [0] = { + .start = TOSA_SCOOP_PHYS + 0x40, + .end = TOSA_SCOOP_PHYS + 0xfff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct scoop_config tosa_scoop_jc_setup = { + .io_dir = TOSA_SCOOP_JC_IO_DIR, + .io_out = TOSA_SCOOP_JC_IO_OUT, +}; + +struct platform_device tosascoop_jc_device = { + .name = "sharp-scoop", + .id = 1, + .dev = { + .platform_data = &tosa_scoop_jc_setup, + .parent = &tosascoop_device.dev, + }, + .num_resources = ARRAY_SIZE(tosa_scoop_jc_resources), + .resource = tosa_scoop_jc_resources, +}; + +/* + * PCMCIA + */ +static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = { +{ + .dev = &tosascoop_device.dev, + .irq = TOSA_IRQ_GPIO_CF_IRQ, + .cd_irq = TOSA_IRQ_GPIO_CF_CD, + .cd_irq_str = "PCMCIA0 CD", +},{ + .dev = &tosascoop_jc_device.dev, + .irq = TOSA_IRQ_GPIO_JC_CF_IRQ, + .cd_irq = -1, +}, +}; + +static void tosa_pcmcia_init(void) +{ + /* Setup default state of GPIO outputs + before we enable them as outputs. */ + GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) | + GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) | + GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) | + GPIO_bit(GPIO53_nPCE_2); + + pxa_gpio_mode(GPIO48_nPOE_MD); + pxa_gpio_mode(GPIO49_nPWE_MD); + pxa_gpio_mode(GPIO50_nPIOR_MD); + pxa_gpio_mode(GPIO51_nPIOW_MD); + pxa_gpio_mode(GPIO55_nPREG_MD); + pxa_gpio_mode(GPIO56_nPWAIT_MD); + pxa_gpio_mode(GPIO57_nIOIS16_MD); + pxa_gpio_mode(GPIO52_nPCE_1_MD); + pxa_gpio_mode(GPIO53_nPCE_2_MD); + pxa_gpio_mode(GPIO54_pSKTSEL_MD); +} + +static struct scoop_pcmcia_config tosa_pcmcia_config = { + .devs = &tosa_pcmcia_scoop[0], + .num_devs = 2, + .pcmcia_init = tosa_pcmcia_init, +}; + +/* + * USB Device Controller + */ +static void tosa_udc_command(int cmd) +{ + switch(cmd) { + case PXA2XX_UDC_CMD_CONNECT: + set_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP); + break; + case PXA2XX_UDC_CMD_DISCONNECT: + reset_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP); + break; + } +} + +static int tosa_udc_is_connected(void) +{ + return ((GPLR(TOSA_GPIO_USB_IN) & GPIO_bit(TOSA_GPIO_USB_IN)) == 0); +} + + +static struct pxa2xx_udc_mach_info udc_info __initdata = { + .udc_command = tosa_udc_command, + .udc_is_connected = tosa_udc_is_connected, +}; + +/* + * MMC/SD Device + */ +static struct pxamci_platform_data tosa_mci_platform_data; + +static int tosa_mci_init(struct device *dev, irqreturn_t (*tosa_detect_int)(int, void *, struct pt_regs *), void *data) +{ + int err; + + /* setup GPIO for PXA25x MMC controller */ + pxa_gpio_mode(GPIO6_MMCCLK_MD); + pxa_gpio_mode(GPIO8_MMCCS0_MD); + pxa_gpio_mode(TOSA_GPIO_nSD_DETECT | GPIO_IN); + + tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250); + + err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, SA_INTERRUPT, + "MMC/SD card detect", data); + if (err) { + printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); + return -1; + } + + set_irq_type(TOSA_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE); + + return 0; +} + +static void tosa_mci_setpower(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data* p_d = dev->platform_data; + + if (( 1 << vdd) & p_d->ocr_mask) { + set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON); + } else { + reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON); + } +} + +static int tosa_mci_get_ro(struct device *dev) +{ + return (read_scoop_reg(&tosascoop_device.dev, SCOOP_GPWR)&TOSA_SCOOP_SD_WP); +} + +static void tosa_mci_exit(struct device *dev, void *data) +{ + free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data); +} + +static struct pxamci_platform_data tosa_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .init = tosa_mci_init, + .get_ro = tosa_mci_get_ro, + .setpower = tosa_mci_setpower, + .exit = tosa_mci_exit, +}; + +/* + * Irda + */ +static void tosa_irda_transceiver_mode(struct device *dev, int mode) +{ + if (mode & IR_OFF) { + reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN); + pxa_gpio_mode(GPIO47_STTXD|GPIO_DFLT_LOW); + pxa_gpio_mode(GPIO47_STTXD|GPIO_OUT); + } else { + pxa_gpio_mode(GPIO47_STTXD_MD); + set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN); + } +} + +static struct pxaficp_platform_data tosa_ficp_platform_data = { + .transceiver_cap = IR_SIRMODE | IR_OFF, + .transceiver_mode = tosa_irda_transceiver_mode, +}; + +/* + * Tosa Keyboard + */ +static struct platform_device tosakbd_device = { + .name = "tosa-keyboard", + .id = -1, +}; + +static struct platform_device *devices[] __initdata = { + &tosascoop_device, + &tosascoop_jc_device, + &tosakbd_device, +}; + +static void __init tosa_init(void) +{ + pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN); + pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN); + pxa_gpio_mode(TOSA_GPIO_USB_IN | GPIO_IN); + + /* setup sleep mode values */ + PWER = 0x00000002; + PFER = 0x00000000; + PRER = 0x00000002; + PGSR0 = 0x00000000; + PGSR1 = 0x00FF0002; + PGSR2 = 0x00014000; + PCFR |= PCFR_OPDE; + + /* enable batt_fault */ + PMCR = 0x01; + + pxa_set_mci_info(&tosa_mci_platform_data); + pxa_set_udc_info(&udc_info); + pxa_set_ficp_info(&tosa_ficp_platform_data); + platform_scoop_config = &tosa_pcmcia_config; + + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +static void __init fixup_tosa(struct machine_desc *desc, + struct tag *tags, char **cmdline, struct meminfo *mi) +{ + sharpsl_save_param(); + mi->nr_banks=1; + mi->bank[0].start = 0xa0000000; + mi->bank[0].node = 0; + mi->bank[0].size = (64*1024*1024); +} + +MACHINE_START(TOSA, "SHARP Tosa") + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .fixup = fixup_tosa, + .map_io = pxa_map_io, + .init_irq = pxa_init_irq, + .init_machine = tosa_init, + .timer = &pxa_timer, +MACHINE_END diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig new file mode 100644 index 0000000..1299768 --- /dev/null +++ b/arch/arm/mach-realview/Kconfig @@ -0,0 +1,20 @@ +menu "RealView platform type" + depends on ARCH_REALVIEW + +config MACH_REALVIEW_EB + bool "Support RealView/EB platform" + default n + select ARM_GIC + help + Include support for the ARM(R) RealView Emulation Baseboard platform. + +config REALVIEW_MPCORE + bool "Support MPcore tile" + depends on MACH_REALVIEW_EB + help + Enable support for the MPCore tile on the Realview platform. + Since there are device address and interrupt differences, a + kernel built with this option enabled is not compatible with + other tiles. + +endmenu diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile new file mode 100644 index 0000000..36e76ba --- /dev/null +++ b/arch/arm/mach-realview/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for the linux kernel. +# + +obj-y := core.o clock.o +obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o diff --git a/arch/arm/mach-realview/Makefile.boot b/arch/arm/mach-realview/Makefile.boot new file mode 100644 index 0000000..c7e75ac --- /dev/null +++ b/arch/arm/mach-realview/Makefile.boot @@ -0,0 +1,4 @@ + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00800000 + diff --git a/arch/arm/mach-realview/clock.c b/arch/arm/mach-realview/clock.c new file mode 100644 index 0000000..002635c --- /dev/null +++ b/arch/arm/mach-realview/clock.c @@ -0,0 +1,145 @@ +/* + * linux/arch/arm/mach-realview/clock.c + * + * Copyright (C) 2004 ARM Limited. + * Written by Deep Blue Solutions Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> + +#include <asm/semaphore.h> +#include <asm/hardware/clock.h> +#include <asm/hardware/icst307.h> + +#include "clock.h" + +static LIST_HEAD(clocks); +static DECLARE_MUTEX(clocks_sem); + +struct clk *clk_get(struct device *dev, const char *id) +{ + struct clk *p, *clk = ERR_PTR(-ENOENT); + + down(&clocks_sem); + list_for_each_entry(p, &clocks, node) { + if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { + clk = p; + break; + } + } + up(&clocks_sem); + + return clk; +} +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ + module_put(clk->owner); +} +EXPORT_SYMBOL(clk_put); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +int clk_use(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_use); + +void clk_unuse(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_unuse); + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + return rate; +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + int ret = -EIO; + + if (clk->setvco) { + struct icst307_vco vco; + + vco = icst307_khz_to_vco(clk->params, rate / 1000); + clk->rate = icst307_khz(clk->params, vco) * 1000; + + printk("Clock %s: setting VCO reg params: S=%d R=%d V=%d\n", + clk->name, vco.s, vco.r, vco.v); + + clk->setvco(clk, vco); + ret = 0; + } + return ret; +} +EXPORT_SYMBOL(clk_set_rate); + +/* + * These are fixed clocks. + */ +static struct clk kmi_clk = { + .name = "KMIREFCLK", + .rate = 24000000, +}; + +static struct clk uart_clk = { + .name = "UARTCLK", + .rate = 24000000, +}; + +static struct clk mmci_clk = { + .name = "MCLK", + .rate = 33000000, +}; + +int clk_register(struct clk *clk) +{ + down(&clocks_sem); + list_add(&clk->node, &clocks); + up(&clocks_sem); + return 0; +} +EXPORT_SYMBOL(clk_register); + +void clk_unregister(struct clk *clk) +{ + down(&clocks_sem); + list_del(&clk->node); + up(&clocks_sem); +} +EXPORT_SYMBOL(clk_unregister); + +static int __init clk_init(void) +{ + clk_register(&kmi_clk); + clk_register(&uart_clk); + clk_register(&mmci_clk); + return 0; +} +arch_initcall(clk_init); diff --git a/arch/arm/mach-realview/clock.h b/arch/arm/mach-realview/clock.h new file mode 100644 index 0000000..dadba69 --- /dev/null +++ b/arch/arm/mach-realview/clock.h @@ -0,0 +1,25 @@ +/* + * linux/arch/arm/mach-realview/clock.h + * + * Copyright (C) 2004 ARM Limited. + * Written by Deep Blue Solutions Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +struct module; +struct icst307_params; + +struct clk { + struct list_head node; + unsigned long rate; + struct module *owner; + const char *name; + const struct icst307_params *params; + void *data; + void (*setvco)(struct clk *, struct icst307_vco vco); +}; + +int clk_register(struct clk *clk); +void clk_unregister(struct clk *clk); diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c new file mode 100644 index 0000000..e2c6fa2 --- /dev/null +++ b/arch/arm/mach-realview/core.c @@ -0,0 +1,610 @@ +/* + * linux/arch/arm/mach-realview/core.c + * + * Copyright (C) 1999 - 2003 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/config.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/sysdev.h> +#include <linux/interrupt.h> + +#include <asm/system.h> +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/leds.h> +#include <asm/mach-types.h> +#include <asm/hardware/amba.h> +#include <asm/hardware/amba_clcd.h> +#include <asm/hardware/arm_timer.h> +#include <asm/hardware/icst307.h> + +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> +#include <asm/mach/irq.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> +#include <asm/mach/mmc.h> + +#include <asm/hardware/gic.h> + +#include "core.h" +#include "clock.h" + +#define REALVIEW_REFCOUNTER (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET) + +/* + * This is the RealView sched_clock implementation. This has + * a resolution of 41.7ns, and a maximum value of about 179s. + */ +unsigned long long sched_clock(void) +{ + unsigned long long v; + + v = (unsigned long long)readl(REALVIEW_REFCOUNTER) * 125; + do_div(v, 3); + + return v; +} + + +#define REALVIEW_FLASHCTRL (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET) + +static int realview_flash_init(void) +{ + u32 val; + + val = __raw_readl(REALVIEW_FLASHCTRL); + val &= ~REALVIEW_FLASHPROG_FLVPPEN; + __raw_writel(val, REALVIEW_FLASHCTRL); + + return 0; +} + +static void realview_flash_exit(void) +{ + u32 val; + + val = __raw_readl(REALVIEW_FLASHCTRL); + val &= ~REALVIEW_FLASHPROG_FLVPPEN; + __raw_writel(val, REALVIEW_FLASHCTRL); +} + +static void realview_flash_set_vpp(int on) +{ + u32 val; + + val = __raw_readl(REALVIEW_FLASHCTRL); + if (on) + val |= REALVIEW_FLASHPROG_FLVPPEN; + else + val &= ~REALVIEW_FLASHPROG_FLVPPEN; + __raw_writel(val, REALVIEW_FLASHCTRL); +} + +static struct flash_platform_data realview_flash_data = { + .map_name = "cfi_probe", + .width = 4, + .init = realview_flash_init, + .exit = realview_flash_exit, + .set_vpp = realview_flash_set_vpp, +}; + +static struct resource realview_flash_resource = { + .start = REALVIEW_FLASH_BASE, + .end = REALVIEW_FLASH_BASE + REALVIEW_FLASH_SIZE, + .flags = IORESOURCE_MEM, +}; + +struct platform_device realview_flash_device = { + .name = "armflash", + .id = 0, + .dev = { + .platform_data = &realview_flash_data, + }, + .num_resources = 1, + .resource = &realview_flash_resource, +}; + +static struct resource realview_smc91x_resources[] = { + [0] = { + .start = REALVIEW_ETH_BASE, + .end = REALVIEW_ETH_BASE + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_ETH, + .end = IRQ_ETH, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device realview_smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(realview_smc91x_resources), + .resource = realview_smc91x_resources, +}; + +#define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET) + +static unsigned int realview_mmc_status(struct device *dev) +{ + struct amba_device *adev = container_of(dev, struct amba_device, dev); + u32 mask; + + if (adev->res.start == REALVIEW_MMCI0_BASE) + mask = 1; + else + mask = 2; + + return readl(REALVIEW_SYSMCI) & mask; +} + +struct mmc_platform_data realview_mmc0_plat_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .status = realview_mmc_status, +}; + +struct mmc_platform_data realview_mmc1_plat_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .status = realview_mmc_status, +}; + +/* + * Clock handling + */ +static const struct icst307_params realview_oscvco_params = { + .ref = 24000, + .vco_max = 200000, + .vd_min = 4 + 8, + .vd_max = 511 + 8, + .rd_min = 1 + 2, + .rd_max = 127 + 2, +}; + +static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco) +{ + void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET; + void __iomem *sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC1_OFFSET; + u32 val; + + val = readl(sys_osc) & ~0x7ffff; + val |= vco.v | (vco.r << 9) | (vco.s << 16); + + writel(0xa05f, sys_lock); + writel(val, sys_osc); + writel(0, sys_lock); +} + +struct clk realview_clcd_clk = { + .name = "CLCDCLK", + .params = &realview_oscvco_params, + .setvco = realview_oscvco_set, +}; + +/* + * CLCD support. + */ +#define SYS_CLCD_MODE_MASK (3 << 0) +#define SYS_CLCD_MODE_888 (0 << 0) +#define SYS_CLCD_MODE_5551 (1 << 0) +#define SYS_CLCD_MODE_565_RLSB (2 << 0) +#define SYS_CLCD_MODE_565_BLSB (3 << 0) +#define SYS_CLCD_NLCDIOON (1 << 2) +#define SYS_CLCD_VDDPOSSWITCH (1 << 3) +#define SYS_CLCD_PWR3V5SWITCH (1 << 4) +#define SYS_CLCD_ID_MASK (0x1f << 8) +#define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8) +#define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8) +#define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8) +#define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8) +#define SYS_CLCD_ID_VGA (0x1f << 8) + +static struct clcd_panel vga = { + .mode = { + .name = "VGA", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 39721, + .left_margin = 40, + .right_margin = 24, + .upper_margin = 32, + .lower_margin = 11, + .hsync_len = 96, + .vsync_len = 2, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .bpp = 16, +}; + +static struct clcd_panel sanyo_3_8_in = { + .mode = { + .name = "Sanyo QVGA", + .refresh = 116, + .xres = 320, + .yres = 240, + .pixclock = 100000, + .left_margin = 6, + .right_margin = 6, + .upper_margin = 5, + .lower_margin = 5, + .hsync_len = 6, + .vsync_len = 6, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD, + .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .bpp = 16, +}; + +static struct clcd_panel sanyo_2_5_in = { + .mode = { + .name = "Sanyo QVGA Portrait", + .refresh = 116, + .xres = 240, + .yres = 320, + .pixclock = 100000, + .left_margin = 20, + .right_margin = 10, + .upper_margin = 2, + .lower_margin = 2, + .hsync_len = 10, + .vsync_len = 2, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_IVS | TIM2_IHS | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .bpp = 16, +}; + +static struct clcd_panel epson_2_2_in = { + .mode = { + .name = "Epson QCIF", + .refresh = 390, + .xres = 176, + .yres = 220, + .pixclock = 62500, + .left_margin = 3, + .right_margin = 2, + .upper_margin = 1, + .lower_margin = 0, + .hsync_len = 3, + .vsync_len = 2, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .bpp = 16, +}; + +/* + * Detect which LCD panel is connected, and return the appropriate + * clcd_panel structure. Note: we do not have any information on + * the required timings for the 8.4in panel, so we presently assume + * VGA timings. + */ +static struct clcd_panel *realview_clcd_panel(void) +{ + void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; + struct clcd_panel *panel = &vga; + u32 val; + + val = readl(sys_clcd) & SYS_CLCD_ID_MASK; + if (val == SYS_CLCD_ID_SANYO_3_8) + panel = &sanyo_3_8_in; + else if (val == SYS_CLCD_ID_SANYO_2_5) + panel = &sanyo_2_5_in; + else if (val == SYS_CLCD_ID_EPSON_2_2) + panel = &epson_2_2_in; + else if (val == SYS_CLCD_ID_VGA) + panel = &vga; + else { + printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n", + val); + panel = &vga; + } + + return panel; +} + +/* + * Disable all display connectors on the interface module. + */ +static void realview_clcd_disable(struct clcd_fb *fb) +{ + void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; + u32 val; + + val = readl(sys_clcd); + val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH; + writel(val, sys_clcd); +} + +/* + * Enable the relevant connector on the interface module. + */ +static void realview_clcd_enable(struct clcd_fb *fb) +{ + void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; + u32 val; + + val = readl(sys_clcd); + val &= ~SYS_CLCD_MODE_MASK; + + switch (fb->fb.var.green.length) { + case 5: + val |= SYS_CLCD_MODE_5551; + break; + case 6: + val |= SYS_CLCD_MODE_565_RLSB; + break; + case 8: + val |= SYS_CLCD_MODE_888; + break; + } + + /* + * Set the MUX + */ + writel(val, sys_clcd); + + /* + * And now enable the PSUs + */ + val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH; + writel(val, sys_clcd); +} + +static unsigned long framesize = SZ_1M; + +static int realview_clcd_setup(struct clcd_fb *fb) +{ + dma_addr_t dma; + + fb->panel = realview_clcd_panel(); + + fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, + &dma, GFP_KERNEL); + if (!fb->fb.screen_base) { + printk(KERN_ERR "CLCD: unable to map framebuffer\n"); + return -ENOMEM; + } + + fb->fb.fix.smem_start = dma; + fb->fb.fix.smem_len = framesize; + + return 0; +} + +static int realview_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) +{ + return dma_mmap_writecombine(&fb->dev->dev, vma, + fb->fb.screen_base, + fb->fb.fix.smem_start, + fb->fb.fix.smem_len); +} + +static void realview_clcd_remove(struct clcd_fb *fb) +{ + dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, + fb->fb.screen_base, fb->fb.fix.smem_start); +} + +struct clcd_board clcd_plat_data = { + .name = "RealView", + .check = clcdfb_check, + .decode = clcdfb_decode, + .disable = realview_clcd_disable, + .enable = realview_clcd_enable, + .setup = realview_clcd_setup, + .mmap = realview_clcd_mmap, + .remove = realview_clcd_remove, +}; + +#ifdef CONFIG_LEDS +#define VA_LEDS_BASE (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET) + +void realview_leds_event(led_event_t ledevt) +{ + unsigned long flags; + u32 val; + + local_irq_save(flags); + val = readl(VA_LEDS_BASE); + + switch (ledevt) { + case led_idle_start: + val = val & ~REALVIEW_SYS_LED0; + break; + + case led_idle_end: + val = val | REALVIEW_SYS_LED0; + break; + + case led_timer: + val = val ^ REALVIEW_SYS_LED1; + break; + + case led_halted: + val = 0; + break; + + default: + break; + } + + writel(val, VA_LEDS_BASE); + local_irq_restore(flags); +} +#endif /* CONFIG_LEDS */ + +/* + * Where is the timer (VA)? + */ +#define TIMER0_VA_BASE __io_address(REALVIEW_TIMER0_1_BASE) +#define TIMER1_VA_BASE (__io_address(REALVIEW_TIMER0_1_BASE) + 0x20) +#define TIMER2_VA_BASE __io_address(REALVIEW_TIMER2_3_BASE) +#define TIMER3_VA_BASE (__io_address(REALVIEW_TIMER2_3_BASE) + 0x20) + +/* + * How long is the timer interval? + */ +#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10) +#if TIMER_INTERVAL >= 0x100000 +#define TIMER_RELOAD (TIMER_INTERVAL >> 8) +#define TIMER_DIVISOR (TIMER_CTRL_DIV256) +#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC) +#elif TIMER_INTERVAL >= 0x10000 +#define TIMER_RELOAD (TIMER_INTERVAL >> 4) /* Divide by 16 */ +#define TIMER_DIVISOR (TIMER_CTRL_DIV16) +#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC) +#else +#define TIMER_RELOAD (TIMER_INTERVAL) +#define TIMER_DIVISOR (TIMER_CTRL_DIV1) +#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) +#endif + +/* + * Returns number of ms since last clock interrupt. Note that interrupts + * will have been disabled by do_gettimeoffset() + */ +static unsigned long realview_gettimeoffset(void) +{ + unsigned long ticks1, ticks2, status; + + /* + * Get the current number of ticks. Note that there is a race + * condition between us reading the timer and checking for + * an interrupt. We get around this by ensuring that the + * counter has not reloaded between our two reads. + */ + ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff; + do { + ticks1 = ticks2; + status = __raw_readl(__io_address(REALVIEW_GIC_DIST_BASE + GIC_DIST_PENDING_SET) + + ((IRQ_TIMERINT0_1 >> 5) << 2)); + ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff; + } while (ticks2 > ticks1); + + /* + * Number of ticks since last interrupt. + */ + ticks1 = TIMER_RELOAD - ticks2; + + /* + * Interrupt pending? If so, we've reloaded once already. + * + * FIXME: Need to check this is effectively timer 0 that expires + */ + if (status & IRQMASK_TIMERINT0_1) + ticks1 += TIMER_RELOAD; + + /* + * Convert the ticks to usecs + */ + return TICKS2USECS(ticks1); +} + +/* + * IRQ handler for the timer + */ +static irqreturn_t realview_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + write_seqlock(&xtime_lock); + + // ...clear the interrupt + writel(1, TIMER0_VA_BASE + TIMER_INTCLR); + + timer_tick(regs); + +#if defined(CONFIG_SMP) && !defined(CONFIG_LOCAL_TIMERS) + smp_send_timer(); + update_process_times(user_mode(regs)); +#endif + + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; +} + +static struct irqaction realview_timer_irq = { + .name = "RealView Timer Tick", + .flags = SA_INTERRUPT | SA_TIMER, + .handler = realview_timer_interrupt, +}; + +/* + * Set up timer interrupt, and return the current time in seconds. + */ +static void __init realview_timer_init(void) +{ + u32 val; + + /* + * set clock frequency: + * REALVIEW_REFCLK is 32KHz + * REALVIEW_TIMCLK is 1MHz + */ + val = readl(__io_address(REALVIEW_SCTL_BASE)); + writel((REALVIEW_TIMCLK << REALVIEW_TIMER1_EnSel) | + (REALVIEW_TIMCLK << REALVIEW_TIMER2_EnSel) | + (REALVIEW_TIMCLK << REALVIEW_TIMER3_EnSel) | + (REALVIEW_TIMCLK << REALVIEW_TIMER4_EnSel) | val, + __io_address(REALVIEW_SCTL_BASE)); + + /* + * Initialise to a known state (all timers off) + */ + writel(0, TIMER0_VA_BASE + TIMER_CTRL); + writel(0, TIMER1_VA_BASE + TIMER_CTRL); + writel(0, TIMER2_VA_BASE + TIMER_CTRL); + writel(0, TIMER3_VA_BASE + TIMER_CTRL); + + writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD); + writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_VALUE); + writel(TIMER_DIVISOR | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC | + TIMER_CTRL_IE, TIMER0_VA_BASE + TIMER_CTRL); + + /* + * Make irqs happen for the system timer + */ + setup_irq(IRQ_TIMERINT0_1, &realview_timer_irq); +} + +struct sys_timer realview_timer = { + .init = realview_timer_init, + .offset = realview_gettimeoffset, +}; diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h new file mode 100644 index 0000000..d83e8ba --- /dev/null +++ b/arch/arm/mach-realview/core.h @@ -0,0 +1,119 @@ +/* + * linux/arch/arm/mach-realview/core.h + * + * Copyright (C) 2004 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_REALVIEW_H +#define __ASM_ARCH_REALVIEW_H + +#include <asm/hardware/amba.h> +#include <asm/leds.h> +#include <asm/io.h> + +#define __io_address(n) __io(IO_ADDRESS(n)) + +extern struct sys_timer realview_timer; + +#define AMBA_DEVICE(name,busid,base,plat) \ +static struct amba_device name##_device = { \ + .dev = { \ + .coherent_dma_mask = ~0, \ + .bus_id = busid, \ + .platform_data = plat, \ + }, \ + .res = { \ + .start = REALVIEW_##base##_BASE, \ + .end = (REALVIEW_##base##_BASE) + SZ_4K - 1,\ + .flags = IORESOURCE_MEM, \ + }, \ + .dma_mask = ~0, \ + .irq = base##_IRQ, \ + /* .dma = base##_DMA,*/ \ +} + +/* + * These devices are connected via the core APB bridge + */ +#define GPIO2_IRQ { IRQ_GPIOINT2, NO_IRQ } +#define GPIO2_DMA { 0, 0 } +#define GPIO3_IRQ { IRQ_GPIOINT3, NO_IRQ } +#define GPIO3_DMA { 0, 0 } + +#define AACI_IRQ { IRQ_AACI, NO_IRQ } +#define AACI_DMA { 0x80, 0x81 } +#define MMCI0_IRQ { IRQ_MMCI0A,IRQ_MMCI0B } +#define MMCI0_DMA { 0x84, 0 } +#define KMI0_IRQ { IRQ_KMI0, NO_IRQ } +#define KMI0_DMA { 0, 0 } +#define KMI1_IRQ { IRQ_KMI1, NO_IRQ } +#define KMI1_DMA { 0, 0 } + +/* + * These devices are connected directly to the multi-layer AHB switch + */ +#define SMC_IRQ { NO_IRQ, NO_IRQ } +#define SMC_DMA { 0, 0 } +#define MPMC_IRQ { NO_IRQ, NO_IRQ } +#define MPMC_DMA { 0, 0 } +#define CLCD_IRQ { IRQ_CLCDINT, NO_IRQ } +#define CLCD_DMA { 0, 0 } +#define DMAC_IRQ { IRQ_DMAINT, NO_IRQ } +#define DMAC_DMA { 0, 0 } + +/* + * These devices are connected via the core APB bridge + */ +#define SCTL_IRQ { NO_IRQ, NO_IRQ } +#define SCTL_DMA { 0, 0 } +#define WATCHDOG_IRQ { IRQ_WDOGINT, NO_IRQ } +#define WATCHDOG_DMA { 0, 0 } +#define GPIO0_IRQ { IRQ_GPIOINT0, NO_IRQ } +#define GPIO0_DMA { 0, 0 } +#define GPIO1_IRQ { IRQ_GPIOINT1, NO_IRQ } +#define GPIO1_DMA { 0, 0 } +#define RTC_IRQ { IRQ_RTCINT, NO_IRQ } +#define RTC_DMA { 0, 0 } + +/* + * These devices are connected via the DMA APB bridge + */ +#define SCI_IRQ { IRQ_SCIINT, NO_IRQ } +#define SCI_DMA { 7, 6 } +#define UART0_IRQ { IRQ_UARTINT0, NO_IRQ } +#define UART0_DMA { 15, 14 } +#define UART1_IRQ { IRQ_UARTINT1, NO_IRQ } +#define UART1_DMA { 13, 12 } +#define UART2_IRQ { IRQ_UARTINT2, NO_IRQ } +#define UART2_DMA { 11, 10 } +#define UART3_IRQ { IRQ_UART3, NO_IRQ } +#define UART3_DMA { 0x86, 0x87 } +#define SSP_IRQ { IRQ_SSPINT, NO_IRQ } +#define SSP_DMA { 9, 8 } + + +extern struct platform_device realview_flash_device; +extern struct platform_device realview_smc91x_device; +extern struct mmc_platform_data realview_mmc0_plat_data; +extern struct mmc_platform_data realview_mmc1_plat_data; +extern struct clk realview_clcd_clk; +extern struct clcd_board clcd_plat_data; + +extern void realview_leds_event(led_event_t ledevt); + +#endif diff --git a/arch/arm/mach-realview/headsmp.S b/arch/arm/mach-realview/headsmp.S new file mode 100644 index 0000000..4075473 --- /dev/null +++ b/arch/arm/mach-realview/headsmp.S @@ -0,0 +1,39 @@ +/* + * linux/arch/arm/mach-realview/headsmp.S + * + * Copyright (c) 2003 ARM Limited + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <linux/init.h> + + __INIT + +/* + * Realview specific entry point for secondary CPUs. This provides + * a "holding pen" into which all secondary cores are held until we're + * ready for them to initialise. + */ +ENTRY(realview_secondary_startup) + mrc p15, 0, r0, c0, c0, 5 + and r0, r0, #15 + adr r4, 1f + ldmia r4, {r5, r6} + sub r4, r4, r5 + add r6, r6, r4 +pen: ldr r7, [r6] + cmp r7, r0 + bne pen + + /* + * we've been released from the holding pen: secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup + +1: .long . + .long pen_release diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c new file mode 100644 index 0000000..09748cb --- /dev/null +++ b/arch/arm/mach-realview/hotplug.c @@ -0,0 +1,138 @@ +/* + * linux/arch/arm/mach-realview/hotplug.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/smp.h> +#include <linux/completion.h> + +extern volatile int pen_release; + +static DECLARE_COMPLETION(cpu_killed); + +static inline void cpu_enter_lowpower(void) +{ + unsigned int v; + + asm volatile( "mcr p15, 0, %1, c7, c14, 0\n" + " mcr p15, 0, %1, c7, c5, 0\n" + " mcr p15, 0, %1, c7, c10, 4\n" + /* + * Turn off coherency + */ + " mrc p15, 0, %0, c1, c0, 1\n" + " bic %0, %0, #0x20\n" + " mcr p15, 0, %0, c1, c0, 1\n" + " mrc p15, 0, %0, c1, c0, 0\n" + " bic %0, %0, #0x04\n" + " mcr p15, 0, %0, c1, c0, 0\n" + : "=&r" (v) + : "r" (0) + : "cc"); +} + +static inline void cpu_leave_lowpower(void) +{ + unsigned int v; + + asm volatile( "mrc p15, 0, %0, c1, c0, 0\n" + " orr %0, %0, #0x04\n" + " mcr p15, 0, %0, c1, c0, 0\n" + " mrc p15, 0, %0, c1, c0, 1\n" + " orr %0, %0, #0x20\n" + " mcr p15, 0, %0, c1, c0, 1\n" + : "=&r" (v) + : + : "cc"); +} + +static inline void platform_do_lowpower(unsigned int cpu) +{ + /* + * there is no power-control hardware on this platform, so all + * we can do is put the core into WFI; this is safe as the calling + * code will have already disabled interrupts + */ + for (;;) { + /* + * here's the WFI + */ + asm(".word 0xe320f003\n" + : + : + : "memory", "cc"); + + if (pen_release == cpu) { + /* + * OK, proper wakeup, we're done + */ + break; + } + + /* + * getting here, means that we have come out of WFI without + * having been woken up - this shouldn't happen + * + * The trouble is, letting people know about this is not really + * possible, since we are currently running incoherently, and + * therefore cannot safely call printk() or anything else + */ +#ifdef DEBUG + printk("CPU%u: spurious wakeup call\n", cpu); +#endif + } +} + +int platform_cpu_kill(unsigned int cpu) +{ + return wait_for_completion_timeout(&cpu_killed, 5000); +} + +/* + * platform-specific code to shutdown a CPU + * + * Called with IRQs disabled + */ +void platform_cpu_die(unsigned int cpu) +{ +#ifdef DEBUG + unsigned int this_cpu = hard_smp_processor_id(); + + if (cpu != this_cpu) { + printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n", + this_cpu, cpu); + BUG(); + } +#endif + + printk(KERN_NOTICE "CPU%u: shutdown\n", cpu); + complete(&cpu_killed); + + /* + * we're ready for shutdown now, so do it + */ + cpu_enter_lowpower(); + platform_do_lowpower(cpu); + + /* + * bring this CPU back into the world of cache + * coherency, and then restore interrupts + */ + cpu_leave_lowpower(); +} + +int mach_cpu_disable(unsigned int cpu) +{ + /* + * we don't allow CPU 0 to be shutdown (it is still too special + * e.g. clock tick interrupts) + */ + return cpu == 0 ? -EPERM : 0; +} diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c new file mode 100644 index 0000000..5e917e3 --- /dev/null +++ b/arch/arm/mach-realview/localtimer.c @@ -0,0 +1,130 @@ +/* + * linux/arch/arm/mach-realview/localtimer.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/smp.h> + +#include <asm/mach/time.h> +#include <asm/hardware/arm_twd.h> +#include <asm/hardware/gic.h> +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> + +#include "core.h" + +#define TWD_BASE(cpu) (__io_address(REALVIEW_TWD_BASE) + \ + ((cpu) * REALVIEW_TWD_SIZE)) + +static unsigned long mpcore_timer_rate; + +/* + * local_timer_ack: checks for a local timer interrupt. + * + * If a local timer interrupt has occured, acknowledge and return 1. + * Otherwise, return 0. + */ +int local_timer_ack(void) +{ + void __iomem *base = TWD_BASE(smp_processor_id()); + + if (__raw_readl(base + TWD_TIMER_INTSTAT)) { + __raw_writel(1, base + TWD_TIMER_INTSTAT); + return 1; + } + + return 0; +} + +void __cpuinit local_timer_setup(unsigned int cpu) +{ + void __iomem *base = TWD_BASE(cpu); + unsigned int load, offset; + u64 waitjiffies; + unsigned int count; + + /* + * If this is the first time round, we need to work out how fast + * the timer ticks + */ + if (mpcore_timer_rate == 0) { + printk("Calibrating local timer... "); + + /* Wait for a tick to start */ + waitjiffies = get_jiffies_64() + 1; + + while (get_jiffies_64() < waitjiffies) + udelay(10); + + /* OK, now the tick has started, let's get the timer going */ + waitjiffies += 5; + + /* enable, no interrupt or reload */ + __raw_writel(0x1, base + TWD_TIMER_CONTROL); + + /* maximum value */ + __raw_writel(0xFFFFFFFFU, base + TWD_TIMER_COUNTER); + + while (get_jiffies_64() < waitjiffies) + udelay(10); + + count = __raw_readl(base + TWD_TIMER_COUNTER); + + mpcore_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5); + + printk("%lu.%02luMHz.\n", mpcore_timer_rate / 1000000, + (mpcore_timer_rate / 100000) % 100); + } + + load = mpcore_timer_rate / HZ; + + __raw_writel(load, base + TWD_TIMER_LOAD); + __raw_writel(0x7, base + TWD_TIMER_CONTROL); + + /* + * Now maneuver our local tick into the right part of the jiffy. + * Start by working out where within the tick our local timer + * interrupt should go. + */ + offset = ((mpcore_timer_rate / HZ) / (NR_CPUS + 1)) * (cpu + 1); + + /* + * gettimeoffset() will return a number of us since the last tick. + * Convert this number of us to a local timer tick count. + * Be careful of integer overflow whilst keeping maximum precision. + * + * with HZ=100 and 1MHz (fpga) ~ 1GHz processor: + * load = 1 ~ 10,000 + * mpcore_timer_rate/10000 = 100 ~ 100,000 + * + * so the multiply value will be less than 10^9 always. + */ + load = (system_timer->offset() * (mpcore_timer_rate / 10000)) / 100; + + /* Add on our offset to get the load value */ + load = (load + offset) % (mpcore_timer_rate / HZ); + + __raw_writel(load, base + TWD_TIMER_COUNTER); + + /* Make sure our local interrupt controller has this enabled */ + __raw_writel(1 << IRQ_LOCALTIMER, + __io_address(REALVIEW_GIC_DIST_BASE) + GIC_DIST_ENABLE_SET); +} + +/* + * take a local timer down + */ +void __cpuexit local_timer_stop(unsigned int cpu) +{ + __raw_writel(0, TWD_BASE(cpu) + TWD_TIMER_CONTROL); +} diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c new file mode 100644 index 0000000..0c7d4ac --- /dev/null +++ b/arch/arm/mach-realview/platsmp.c @@ -0,0 +1,200 @@ +/* + * linux/arch/arm/mach-realview/platsmp.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/smp.h> + +#include <asm/cacheflush.h> +#include <asm/hardware/arm_scu.h> +#include <asm/hardware.h> + +#include "core.h" + +extern void realview_secondary_startup(void); + +/* + * control for which core is the next to come out of the secondary + * boot "holding pen" + */ +volatile int __cpuinitdata pen_release = -1; + +static unsigned int __init get_core_count(void) +{ + unsigned int ncores; + + ncores = __raw_readl(__io_address(REALVIEW_MPCORE_SCU_BASE) + SCU_CONFIG); + + return (ncores & 0x03) + 1; +} + +static DEFINE_SPINLOCK(boot_lock); + +void __cpuinit platform_secondary_init(unsigned int cpu) +{ + /* + * the primary core may have used a "cross call" soft interrupt + * to get this processor out of WFI in the BootMonitor - make + * sure that we are no longer being sent this soft interrupt + */ + smp_cross_call_done(cpumask_of_cpu(cpu)); + + /* + * if any interrupts are already enabled for the primary + * core (e.g. timer irq), then they will not have been enabled + * for us: do so + */ + gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE)); + + /* + * let the primary processor know we're out of the + * pen, then head off into the C entry point + */ + pen_release = -1; + + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + + /* + * set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* + * The secondary processor is waiting to be released from + * the holding pen - release it, then wait for it to flag + * that it has been released by resetting pen_release. + * + * Note that "pen_release" is the hardware CPU ID, whereas + * "cpu" is Linux's internal ID. + */ + pen_release = cpu; + flush_cache_all(); + + /* + * XXX + * + * This is a later addition to the booting protocol: the + * bootMonitor now puts secondary cores into WFI, so + * poke_milo() no longer gets the cores moving; we need + * to send a soft interrupt to wake the secondary core. + * Use smp_cross_call() for this, since there's little + * point duplicating the code here + */ + smp_cross_call(cpumask_of_cpu(cpu)); + + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) { + if (pen_release == -1) + break; + + udelay(10); + } + + /* + * now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return pen_release != -1 ? -ENOSYS : 0; +} + +static void __init poke_milo(void) +{ + extern void secondary_startup(void); + + /* nobody is to be released from the pen yet */ + pen_release = -1; + + /* + * write the address of secondary startup into the system-wide + * flags register, then clear the bottom two bits, which is what + * BootMonitor is waiting for + */ +#if 1 +#define REALVIEW_SYS_FLAGSS_OFFSET 0x30 + __raw_writel(virt_to_phys(realview_secondary_startup), + __io_address(REALVIEW_SYS_BASE) + + REALVIEW_SYS_FLAGSS_OFFSET); +#define REALVIEW_SYS_FLAGSC_OFFSET 0x34 + __raw_writel(3, + __io_address(REALVIEW_SYS_BASE) + + REALVIEW_SYS_FLAGSC_OFFSET); +#endif + + mb(); +} + +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + unsigned int ncores = get_core_count(); + unsigned int cpu = smp_processor_id(); + int i; + + /* sanity check */ + if (ncores == 0) { + printk(KERN_ERR + "Realview: strange CM count of 0? Default to 1\n"); + + ncores = 1; + } + + if (ncores > NR_CPUS) { + printk(KERN_WARNING + "Realview: no. of cores (%d) greater than configured " + "maximum of %d - clipping\n", + ncores, NR_CPUS); + ncores = NR_CPUS; + } + + smp_store_cpu_info(cpu); + + /* + * are we trying to boot more cores than exist? + */ + if (max_cpus > ncores) + max_cpus = ncores; + + /* + * Enable the local timer for primary CPU + */ + local_timer_setup(cpu); + + /* + * Initialise the possible/present maps. + * cpu_possible_map describes the set of CPUs which may be present + * cpu_present_map describes the set of CPUs populated + */ + for (i = 0; i < max_cpus; i++) { + cpu_set(i, cpu_possible_map); + cpu_set(i, cpu_present_map); + } + + /* + * Do we need any more CPUs? If so, then let them know where + * to start. Note that, on modern versions of MILO, the "poke" + * doesn't actually do anything until each individual core is + * sent a soft interrupt to get it out of WFI + */ + if (max_cpus > 1) + poke_milo(); +} diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c new file mode 100644 index 0000000..7dc3250 --- /dev/null +++ b/arch/arm/mach-realview/realview_eb.c @@ -0,0 +1,177 @@ +/* + * linux/arch/arm/mach-realview/realview_eb.c + * + * Copyright (C) 2004 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/sysdev.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/leds.h> +#include <asm/mach-types.h> +#include <asm/hardware/gic.h> +#include <asm/hardware/amba.h> +#include <asm/hardware/icst307.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/mmc.h> + +#include <asm/arch/irqs.h> + +#include "core.h" +#include "clock.h" + +static struct map_desc realview_eb_io_desc[] __initdata = { + { + .virtual = IO_ADDRESS(REALVIEW_SYS_BASE), + .pfn = __phys_to_pfn(REALVIEW_SYS_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_GIC_CPU_BASE), + .pfn = __phys_to_pfn(REALVIEW_GIC_CPU_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_GIC_DIST_BASE), + .pfn = __phys_to_pfn(REALVIEW_GIC_DIST_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_SCTL_BASE), + .pfn = __phys_to_pfn(REALVIEW_SCTL_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_TIMER0_1_BASE), + .pfn = __phys_to_pfn(REALVIEW_TIMER0_1_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = IO_ADDRESS(REALVIEW_TIMER2_3_BASE), + .pfn = __phys_to_pfn(REALVIEW_TIMER2_3_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, +#ifdef CONFIG_DEBUG_LL + { + .virtual = IO_ADDRESS(REALVIEW_UART0_BASE), + .pfn = __phys_to_pfn(REALVIEW_UART0_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + } +#endif +}; + +static void __init realview_eb_map_io(void) +{ + iotable_init(realview_eb_io_desc, ARRAY_SIZE(realview_eb_io_desc)); +} + +/* FPGA Primecells */ +AMBA_DEVICE(aaci, "fpga:04", AACI, NULL); +AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data); +AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL); +AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL); +AMBA_DEVICE(uart3, "fpga:09", UART3, NULL); + +/* DevChip Primecells */ +AMBA_DEVICE(smc, "dev:00", SMC, NULL); +AMBA_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data); +AMBA_DEVICE(dmac, "dev:30", DMAC, NULL); +AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); +AMBA_DEVICE(wdog, "dev:e1", WATCHDOG, NULL); +AMBA_DEVICE(gpio0, "dev:e4", GPIO0, NULL); +AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL); +AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL); +AMBA_DEVICE(rtc, "dev:e8", RTC, NULL); +AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); +AMBA_DEVICE(uart0, "dev:f1", UART0, NULL); +AMBA_DEVICE(uart1, "dev:f2", UART1, NULL); +AMBA_DEVICE(uart2, "dev:f3", UART2, NULL); +AMBA_DEVICE(ssp0, "dev:f4", SSP, NULL); + +static struct amba_device *amba_devs[] __initdata = { + &dmac_device, + &uart0_device, + &uart1_device, + &uart2_device, + &uart3_device, + &smc_device, + &clcd_device, + &sctl_device, + &wdog_device, + &gpio0_device, + &gpio1_device, + &gpio2_device, + &rtc_device, + &sci0_device, + &ssp0_device, + &aaci_device, + &mmc0_device, + &kmi0_device, + &kmi1_device, +}; + +static void __init gic_init_irq(void) +{ +#ifdef CONFIG_REALVIEW_MPCORE + writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK)); + writel(0x008003c0, __io_address(REALVIEW_SYS_BASE) + 0xd8); + writel(0x00000000, __io_address(REALVIEW_SYS_LOCK)); +#endif + gic_dist_init(__io_address(REALVIEW_GIC_DIST_BASE)); + gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE)); +} + +static void __init realview_eb_init(void) +{ + int i; + + clk_register(&realview_clcd_clk); + + platform_device_register(&realview_flash_device); + platform_device_register(&realview_smc91x_device); + + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { + struct amba_device *d = amba_devs[i]; + amba_device_register(d, &iomem_resource); + } + +#ifdef CONFIG_LEDS + leds_event = realview_leds_event; +#endif +} + +MACHINE_START(REALVIEW_EB, "ARM-RealView EB") + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .phys_ram = 0x00000000, + .phys_io = REALVIEW_UART0_BASE, + .io_pg_offst = (IO_ADDRESS(REALVIEW_UART0_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = realview_eb_map_io, + .init_irq = gic_init_irq, + .timer = &realview_timer, + .init_machine = realview_eb_init, +MACHINE_END diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index c796bcd..0b9d7ca 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -121,6 +121,14 @@ config S3C2410_BOOT_WATCHDOG system resets depends on the value of PCLK. The timeout on an 200MHz s3c2410 should be about 30 seconds. +config S3C2410_BOOT_ERROR_RESET + bool "S3C2410 Reboot on decompression error" + depends on ARCH_S3C2410 + help + Say y here to use the watchdog to reset the system if the + kernel decompressor detects an error during decompression. + + comment "S3C2410 Setup" config S3C2410_DMA diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c index 8390b68..0f81fc0 100644 --- a/arch/arm/mach-s3c2410/mach-anubis.c +++ b/arch/arm/mach-s3c2410/mach-anubis.c @@ -56,8 +56,16 @@ static struct map_desc anubis_iodesc[] __initdata = { /* ISA IO areas */ - { (u32)S3C24XX_VA_ISA_BYTE, 0x0, SZ_16M, MT_DEVICE }, - { (u32)S3C24XX_VA_ISA_WORD, 0x0, SZ_16M, MT_DEVICE }, + { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = __phys_to_pfn(0x0), + .length = SZ_4M, + .type = MT_DEVICE + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = __phys_to_pfn(0x0), + .length = SZ_4M, MT_DEVICE + }, /* we could possibly compress the next set down into a set of smaller tables * pagetables, but that would mean using an L2 section, and it still means @@ -66,16 +74,41 @@ static struct map_desc anubis_iodesc[] __initdata = { /* CPLD control registers */ - { (u32)ANUBIS_VA_CTRL1, ANUBIS_PA_CTRL1, SZ_4K, MT_DEVICE }, - { (u32)ANUBIS_VA_CTRL2, ANUBIS_PA_CTRL2, SZ_4K, MT_DEVICE }, + { + .virtual = (u32)ANUBIS_VA_CTRL1, + .pfn = __phys_to_pfn(ANUBIS_PA_CTRL1), + .length = SZ_4K, + .type = MT_DEVICE + }, { + .virtual = (u32)ANUBIS_VA_CTRL2, + .pfn = __phys_to_pfn(ANUBIS_PA_CTRL2), + .length = SZ_4K, + .type =MT_DEVICE + }, /* IDE drives */ - { (u32)ANUBIS_IDEPRI, S3C2410_CS3, SZ_1M, MT_DEVICE }, - { (u32)ANUBIS_IDEPRIAUX, S3C2410_CS3+(1<<26), SZ_1M, MT_DEVICE }, - - { (u32)ANUBIS_IDESEC, S3C2410_CS4, SZ_1M, MT_DEVICE }, - { (u32)ANUBIS_IDESECAUX, S3C2410_CS4+(1<<26), SZ_1M, MT_DEVICE }, + { + .virtual = (u32)ANUBIS_IDEPRI, + .pfn = __phys_to_pfn(S3C2410_CS3), + .length = SZ_1M, + .type = MT_DEVICE + }, { + .virtual = (u32)ANUBIS_IDEPRIAUX, + .pfn = __phys_to_pfn(S3C2410_CS3+(1<<26)), + .length = SZ_1M, + .type = MT_DEVICE + }, { + .virtual = (u32)ANUBIS_IDESEC, + .pfn = __phys_to_pfn(S3C2410_CS4), + .length = SZ_1M, + .type = MT_DEVICE + }, { + .virtual = (u32)ANUBIS_IDESECAUX, + .pfn = __phys_to_pfn(S3C2410_CS4+(1<<26)), + .length = SZ_1M, + .type = MT_DEVICE + }, }; #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 0b71c89..1be2567 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -89,32 +89,63 @@ /* macros to modify the physical addresses for io space */ -#define PA_CS2(item) ((item) + S3C2410_CS2) -#define PA_CS3(item) ((item) + S3C2410_CS3) -#define PA_CS4(item) ((item) + S3C2410_CS4) -#define PA_CS5(item) ((item) + S3C2410_CS5) +#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2)) +#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3)) +#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4)) +#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5)) static struct map_desc bast_iodesc[] __initdata = { /* ISA IO areas */ - - { (u32)S3C24XX_VA_ISA_BYTE, PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - { (u32)S3C24XX_VA_ISA_WORD, PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - - /* we could possibly compress the next set down into a set of smaller tables - * pagetables, but that would mean using an L2 section, and it still means - * we cannot actually feed the same register to an LDR due to 16K spacing - */ - + { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = PA_CS2(BAST_PA_ISAIO), + .length = SZ_16M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = PA_CS3(BAST_PA_ISAIO), + .length = SZ_16M, + .type = MT_DEVICE, + }, /* bast CPLD control registers, and external interrupt controls */ - { (u32)BAST_VA_CTRL1, BAST_PA_CTRL1, SZ_1M, MT_DEVICE }, - { (u32)BAST_VA_CTRL2, BAST_PA_CTRL2, SZ_1M, MT_DEVICE }, - { (u32)BAST_VA_CTRL3, BAST_PA_CTRL3, SZ_1M, MT_DEVICE }, - { (u32)BAST_VA_CTRL4, BAST_PA_CTRL4, SZ_1M, MT_DEVICE }, - + { + .virtual = (u32)BAST_VA_CTRL1, + .pfn = __phys_to_pfn(BAST_PA_CTRL1), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_CTRL2, + .pfn = __phys_to_pfn(BAST_PA_CTRL2), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_CTRL3, + .pfn = __phys_to_pfn(BAST_PA_CTRL3), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_CTRL4, + .pfn = __phys_to_pfn(BAST_PA_CTRL4), + .length = SZ_1M, + .type = MT_DEVICE, + }, /* PC104 IRQ mux */ - { (u32)BAST_VA_PC104_IRQREQ, BAST_PA_PC104_IRQREQ, SZ_1M, MT_DEVICE }, - { (u32)BAST_VA_PC104_IRQRAW, BAST_PA_PC104_IRQRAW, SZ_1M, MT_DEVICE }, - { (u32)BAST_VA_PC104_IRQMASK, BAST_PA_PC104_IRQMASK, SZ_1M, MT_DEVICE }, + { + .virtual = (u32)BAST_VA_PC104_IRQREQ, + .pfn = __phys_to_pfn(BAST_PA_PC104_IRQREQ), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_PC104_IRQRAW, + .pfn = __phys_to_pfn(BAST_PA_PC104_IRQRAW), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)BAST_VA_PC104_IRQMASK, + .pfn = __phys_to_pfn(BAST_PA_PC104_IRQMASK), + .length = SZ_1M, + .type = MT_DEVICE, + }, /* peripheral space... one for each of fast/slow/byte/16bit */ /* note, ide is only decoded in word space, even though some registers diff --git a/arch/arm/mach-s3c2410/mach-rx3715.c b/arch/arm/mach-s3c2410/mach-rx3715.c index 8f2a90b..f8d86d1 100644 --- a/arch/arm/mach-s3c2410/mach-rx3715.c +++ b/arch/arm/mach-s3c2410/mach-rx3715.c @@ -17,6 +17,7 @@ * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA * 14-Mar-2005 BJD Fixed __iomem warnings * 20-Sep-2005 BJD Added static to non-exported items + * 31-Oct-2005 BJD Added LCD setup for framebuffer */ #include <linux/kernel.h> @@ -43,6 +44,9 @@ #include <asm/arch/regs-serial.h> #include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-lcd.h> + +#include <asm/arch/fb.h> #include "clock.h" #include "devs.h" @@ -52,8 +56,17 @@ static struct map_desc rx3715_iodesc[] __initdata = { /* dump ISA space somewhere unused */ - { (u32)S3C24XX_VA_ISA_WORD, S3C2410_CS3, SZ_16M, MT_DEVICE }, - { (u32)S3C24XX_VA_ISA_BYTE, S3C2410_CS3, SZ_16M, MT_DEVICE }, + { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = __phys_to_pfn(S3C2410_CS3), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = __phys_to_pfn(S3C2410_CS3), + .length = SZ_1M, + .type = MT_DEVICE, + }, }; @@ -97,6 +110,66 @@ static struct s3c2410_uartcfg rx3715_uartcfgs[] = { } }; +/* framebuffer lcd controller information */ + +static struct s3c2410fb_mach_info rx3715_lcdcfg __initdata = { + .regs = { + .lcdcon1 = S3C2410_LCDCON1_TFT16BPP | \ + S3C2410_LCDCON1_TFT | \ + S3C2410_LCDCON1_CLKVAL(0x0C), + + .lcdcon2 = S3C2410_LCDCON2_VBPD(5) | \ + S3C2410_LCDCON2_LINEVAL(319) | \ + S3C2410_LCDCON2_VFPD(6) | \ + S3C2410_LCDCON2_VSPW(2), + + .lcdcon3 = S3C2410_LCDCON3_HBPD(35) | \ + S3C2410_LCDCON3_HOZVAL(239) | \ + S3C2410_LCDCON3_HFPD(35), + + .lcdcon4 = S3C2410_LCDCON4_MVAL(0) | \ + S3C2410_LCDCON4_HSPW(7), + + .lcdcon5 = S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_HWSWP, + }, + + .lpcsel = 0xf82, + + .gpccon = 0xaa955699, + .gpccon_mask = 0xffc003cc, + .gpcup = 0x0000ffff, + .gpcup_mask = 0xffffffff, + + .gpdcon = 0xaa95aaa1, + .gpdcon_mask = 0xffc0fff0, + .gpdup = 0x0000faff, + .gpdup_mask = 0xffffffff, + + .fixed_syncs = 1, + .width = 240, + .height = 320, + + .xres = { + .min = 240, + .max = 240, + .defval = 240, + }, + + .yres = { + .max = 320, + .min = 320, + .defval = 320, + }, + + .bpp = { + .min = 16, + .max = 16, + .defval = 16, + }, +}; + static struct platform_device *rx3715_devices[] __initdata = { &s3c_device_usb, &s3c_device_lcd, @@ -123,14 +196,12 @@ static void __init rx3715_init_irq(void) s3c24xx_init_irq(); } -#ifdef CONFIG_PM static void __init rx3715_init_machine(void) { s3c2410_pm_init(); + s3c24xx_fb_set_platdata(&rx3715_lcdcfg); } -#else -#define rx3715_init_machine NULL -#endif + MACHINE_START(RX3715, "IPAQ-RX3715") /* Maintainer: Ben Dooks <ben@fluff.org> */ diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c index d666c62..4e31118 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2440.c +++ b/arch/arm/mach-s3c2410/mach-smdk2440.c @@ -58,8 +58,27 @@ static struct map_desc smdk2440_iodesc[] __initdata = { /* ISA IO Space map (memory space selected by A24) */ - { (u32)S3C24XX_VA_ISA_WORD, S3C2410_CS2, SZ_16M, MT_DEVICE }, - { (u32)S3C24XX_VA_ISA_BYTE, S3C2410_CS2, SZ_16M, MT_DEVICE }, + { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = __phys_to_pfn(S3C2410_CS2), + .length = 0x10000, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000, + .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), + .length = SZ_4M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = __phys_to_pfn(S3C2410_CS2), + .length = 0x10000, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000, + .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)), + .length = SZ_4M, + .type = MT_DEVICE, + } }; #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 46b2596..ae7e099 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -74,27 +74,47 @@ /* macros to modify the physical addresses for io space */ -#define PA_CS2(item) ((item) + S3C2410_CS2) -#define PA_CS3(item) ((item) + S3C2410_CS3) -#define PA_CS4(item) ((item) + S3C2410_CS4) -#define PA_CS5(item) ((item) + S3C2410_CS5) +#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2)) +#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3)) +#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4)) +#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5)) static struct map_desc vr1000_iodesc[] __initdata = { /* ISA IO areas */ - - { (u32)S3C24XX_VA_ISA_BYTE, PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - { (u32)S3C24XX_VA_ISA_WORD, PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE }, - - /* we could possibly compress the next set down into a set of smaller tables - * pagetables, but that would mean using an L2 section, and it still means - * we cannot actually feed the same register to an LDR due to 16K spacing - */ - - /* bast CPLD control registers, and external interrupt controls */ - { (u32)VR1000_VA_CTRL1, VR1000_PA_CTRL1, SZ_1M, MT_DEVICE }, - { (u32)VR1000_VA_CTRL2, VR1000_PA_CTRL2, SZ_1M, MT_DEVICE }, - { (u32)VR1000_VA_CTRL3, VR1000_PA_CTRL3, SZ_1M, MT_DEVICE }, - { (u32)VR1000_VA_CTRL4, VR1000_PA_CTRL4, SZ_1M, MT_DEVICE }, + { + .virtual = (u32)S3C24XX_VA_ISA_BYTE, + .pfn = PA_CS2(BAST_PA_ISAIO), + .length = SZ_16M, + .type = MT_DEVICE, + }, { + .virtual = (u32)S3C24XX_VA_ISA_WORD, + .pfn = PA_CS3(BAST_PA_ISAIO), + .length = SZ_16M, + .type = MT_DEVICE, + }, + + /* CPLD control registers, and external interrupt controls */ + { + .virtual = (u32)VR1000_VA_CTRL1, + .pfn = __phys_to_pfn(VR1000_PA_CTRL1), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)VR1000_VA_CTRL2, + .pfn = __phys_to_pfn(VR1000_PA_CTRL2), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)VR1000_VA_CTRL3, + .pfn = __phys_to_pfn(VR1000_PA_CTRL3), + .length = SZ_1M, + .type = MT_DEVICE, + }, { + .virtual = (u32)VR1000_VA_CTRL4, + .pfn = __phys_to_pfn(VR1000_PA_CTRL4), + .length = SZ_1M, + .type = MT_DEVICE, + }, /* peripheral space... one for each of fast/slow/byte/16bit */ /* note, ide is only decoded in word space, even though some registers diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index 47e0420..e4b435e 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -124,11 +124,13 @@ static void __init sa1100_timer_init(void) tv.tv_sec = sa1100_get_rtc_time(); do_settimeofday(&tv); - OSMR0 = 0; /* set initial match at 0 */ + OIER = 0; /* disable any timer interrupts */ + OSCR = LATCH*2; /* push OSCR out of the way */ + OSMR0 = LATCH; /* set initial match */ OSSR = 0xf; /* clear status on all timers */ setup_irq(IRQ_OST0, &sa1100_timer_irq); - OIER |= OIER_E0; /* enable match on timer 0 to cause interrupts */ - OSCR = 0; /* initialize free-running timer, force first match */ + OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */ + OSCR = 0; /* initialize free-running timer */ } #ifdef CONFIG_NO_IDLE_HZ diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index c54e04c..e3c14d6 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -120,8 +120,8 @@ config CPU_ARM925T # ARM926T config CPU_ARM926T - bool "Support ARM926T processor" if ARCH_INTEGRATOR - depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX + bool "Support ARM926T processor" + depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX select CPU_32v5 select CPU_ABRT_EV5TJ @@ -242,7 +242,7 @@ config CPU_XSCALE # ARMv6 config CPU_V6 bool "Support ARM V6 processor" - depends on ARCH_INTEGRATOR + depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB select CPU_32v6 select CPU_ABRT_EV6 select CPU_CACHE_V6 @@ -250,6 +250,18 @@ config CPU_V6 select CPU_COPY_V6 select CPU_TLB_V6 +# ARMv6k +config CPU_32v6K + bool "Support ARM V6K processor extensions" if !SMP + depends on CPU_V6 + default y if SMP + help + Say Y here if your ARMv6 processor supports the 'K' extension. + This enables the kernel to use some instructions not present + on previous processors, and as such a kernel build with this + enabled will not boot on processors with do not support these + instructions. + # Figure out what processor architecture version we should be using. # This defines the compiler instruction set which depends on the machine type. config CPU_32v3 diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index fd079ff..c168f32 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -486,10 +486,17 @@ static void __init devicemaps_init(struct machine_desc *mdesc) /* * Ask the machine support to map in the statically mapped devices. - * After this point, we can start to touch devices again. */ if (mdesc->map_io) mdesc->map_io(); + + /* + * Finally flush the tlb again - this ensures that we're in a + * consistent state wrt the writebuffer if the writebuffer needs + * draining. After this point, we can start to touch devices + * again. + */ + local_flush_tlb_all(); } /* diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c index 1221fdd..9e50127 100644 --- a/arch/arm/mm/mm-armv.c +++ b/arch/arm/mm/mm-armv.c @@ -354,7 +354,7 @@ void __init build_mem_type_table(void) { struct cachepolicy *cp; unsigned int cr = get_cr(); - unsigned int user_pgprot; + unsigned int user_pgprot, kern_pgprot; int cpu_arch = cpu_architecture(); int i; @@ -381,7 +381,7 @@ void __init build_mem_type_table(void) } cp = &cache_policies[cachepolicy]; - user_pgprot = cp->pte; + kern_pgprot = user_pgprot = cp->pte; /* * ARMv6 and above have extended page tables. @@ -393,6 +393,7 @@ void __init build_mem_type_table(void) */ mem_types[MT_MEMORY].prot_sect &= ~PMD_BIT4; mem_types[MT_ROM].prot_sect &= ~PMD_BIT4; + /* * Mark cache clean areas and XIP ROM read only * from SVC mode and no access from userspace. @@ -412,32 +413,47 @@ void __init build_mem_type_table(void) * (iow, non-global) */ user_pgprot |= L_PTE_ASID; + +#ifdef CONFIG_SMP + /* + * Mark memory with the "shared" attribute for SMP systems + */ + user_pgprot |= L_PTE_SHARED; + kern_pgprot |= L_PTE_SHARED; + mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; +#endif } + for (i = 0; i < 16; i++) { + unsigned long v = pgprot_val(protection_map[i]); + v = (v & ~(L_PTE_BUFFERABLE|L_PTE_CACHEABLE)) | user_pgprot; + protection_map[i] = __pgprot(v); + } + + mem_types[MT_LOW_VECTORS].prot_pte |= kern_pgprot; + mem_types[MT_HIGH_VECTORS].prot_pte |= kern_pgprot; + if (cpu_arch >= CPU_ARCH_ARMv5) { - mem_types[MT_LOW_VECTORS].prot_pte |= cp->pte & PTE_CACHEABLE; - mem_types[MT_HIGH_VECTORS].prot_pte |= cp->pte & PTE_CACHEABLE; +#ifndef CONFIG_SMP + /* + * Only use write-through for non-SMP systems + */ + mem_types[MT_LOW_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE; + mem_types[MT_HIGH_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE; +#endif } else { - mem_types[MT_LOW_VECTORS].prot_pte |= cp->pte; - mem_types[MT_HIGH_VECTORS].prot_pte |= cp->pte; mem_types[MT_MINICLEAN].prot_sect &= ~PMD_SECT_TEX(1); } + pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | + L_PTE_DIRTY | L_PTE_WRITE | + L_PTE_EXEC | kern_pgprot); + mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask; mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask; mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd; mem_types[MT_ROM].prot_sect |= cp->pmd; - for (i = 0; i < 16; i++) { - unsigned long v = pgprot_val(protection_map[i]); - v = (v & ~(PTE_BUFFERABLE|PTE_CACHEABLE)) | user_pgprot; - protection_map[i] = __pgprot(v); - } - - pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | - L_PTE_DIRTY | L_PTE_WRITE | - L_PTE_EXEC | cp->pte); - switch (cp->pmd) { case PMD_SECT_WT: mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WT; @@ -469,14 +485,14 @@ void __init create_mapping(struct map_desc *md) if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) { printk(KERN_WARNING "BUG: not creating mapping for " - "0x%016llx at 0x%08lx in user region\n", + "0x%08llx at 0x%08lx in user region\n", __pfn_to_phys((u64)md->pfn), md->virtual); return; } if ((md->type == MT_DEVICE || md->type == MT_ROM) && md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) { - printk(KERN_WARNING "BUG: mapping for 0x%016llx at 0x%08lx " + printk(KERN_WARNING "BUG: mapping for 0x%08llx at 0x%08lx " "overlaps vmalloc space\n", __pfn_to_phys((u64)md->pfn), md->virtual); } @@ -492,14 +508,14 @@ void __init create_mapping(struct map_desc *md) if(md->pfn >= 0x100000) { if(domain) { printk(KERN_ERR "MM: invalid domain in supersection " - "mapping for 0x%016llx at 0x%08lx\n", + "mapping for 0x%08llx at 0x%08lx\n", __pfn_to_phys((u64)md->pfn), md->virtual); return; } if((md->virtual | md->length | __pfn_to_phys(md->pfn)) & ~SUPERSECTION_MASK) { printk(KERN_ERR "MM: cannot create mapping for " - "0x%016llx at 0x%08lx invalid alignment\n", + "0x%08llx at 0x%08lx invalid alignment\n", __pfn_to_phys((u64)md->pfn), md->virtual); return; } diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 9bb5fff..92f3ca3 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -12,6 +12,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> +#include <asm/hardware/arm_scu.h> #include <asm/procinfo.h> #include <asm/pgtable.h> @@ -112,6 +113,9 @@ ENTRY(cpu_v6_dcache_clean_area) ENTRY(cpu_v6_switch_mm) mov r2, #0 ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id +#ifdef CONFIG_SMP + orr r0, r0, #2 @ set shared pgtable +#endif mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB mcr p15, 0, r2, c7, c10, 4 @ drain write buffer mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 @@ -140,7 +144,7 @@ ENTRY(cpu_v6_switch_mm) ENTRY(cpu_v6_set_pte) str r1, [r0], #-2048 @ linux version - bic r2, r1, #0x000007f0 + bic r2, r1, #0x000003f0 bic r2, r2, #0x00000003 orr r2, r2, #PTE_EXT_AP0 | 2 @@ -191,6 +195,23 @@ cpu_v6_name: * - cache type register is implemented */ __v6_setup: +#ifdef CONFIG_SMP + /* Set up the SCU on core 0 only */ + mrc p15, 0, r0, c0, c0, 5 @ CPU core number + ands r0, r0, #15 + moveq r0, #0x10000000 @ SCU_BASE + orreq r0, r0, #0x00100000 + ldreq r5, [r0, #SCU_CTRL] + orreq r5, r5, #1 + streq r5, [r0, #SCU_CTRL] + +#ifndef CONFIG_CPU_DCACHE_DISABLE + mrc p15, 0, r0, c1, c0, 1 @ Enable SMP/nAMP mode + orr r0, r0, #0x20 + mcr p15, 0, r0, c1, c0, 1 +#endif +#endif + mov r0, #0 mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache @@ -198,6 +219,9 @@ __v6_setup: mcr p15, 0, r0, c7, c10, 4 @ drain write buffer mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs mcr p15, 0, r0, c2, c0, 2 @ TTB control register +#ifdef CONFIG_SMP + orr r4, r4, #2 @ set shared pgtable +#endif mcr p15, 0, r4, c2, c0, 1 @ load TTB1 #ifdef CONFIG_VFP mrc p15, 0, r0, c1, c0, 2 diff --git a/arch/arm/nwfpe/fpa11.h b/arch/arm/nwfpe/fpa11.h index 9677ae8..da4c616 100644 --- a/arch/arm/nwfpe/fpa11.h +++ b/arch/arm/nwfpe/fpa11.h @@ -60,7 +60,7 @@ typedef union tagFPREG { #ifdef CONFIG_FPE_NWFPE_XP floatx80 fExtended; #else - int padding[3]; + u32 padding[3]; #endif } FPREG; diff --git a/arch/arm/nwfpe/fpa11_cpdt.c b/arch/arm/nwfpe/fpa11_cpdt.c index b0db5cb..32859fa 100644 --- a/arch/arm/nwfpe/fpa11_cpdt.c +++ b/arch/arm/nwfpe/fpa11_cpdt.c @@ -59,8 +59,13 @@ static inline void loadExtended(const unsigned int Fn, const unsigned int __user p = (unsigned int *) &fpa11->fpreg[Fn].fExtended; fpa11->fType[Fn] = typeExtended; get_user(p[0], &pMem[0]); /* sign & exponent */ +#ifdef __ARMEB__ + get_user(p[1], &pMem[1]); /* ms bits */ + get_user(p[2], &pMem[2]); /* ls bits */ +#else get_user(p[1], &pMem[2]); /* ls bits */ get_user(p[2], &pMem[1]); /* ms bits */ +#endif } #endif @@ -177,8 +182,13 @@ static inline void storeExtended(const unsigned int Fn, unsigned int __user *pMe } put_user(val.i[0], &pMem[0]); /* sign & exp */ +#ifdef __ARMEB__ + put_user(val.i[1], &pMem[1]); /* msw */ + put_user(val.i[2], &pMem[2]); +#else put_user(val.i[1], &pMem[2]); put_user(val.i[2], &pMem[1]); /* msw */ +#endif } #endif diff --git a/arch/arm/nwfpe/fpopcode.c b/arch/arm/nwfpe/fpopcode.c index 4c9f570..67ff2ab 100644 --- a/arch/arm/nwfpe/fpopcode.c +++ b/arch/arm/nwfpe/fpopcode.c @@ -29,14 +29,14 @@ #ifdef CONFIG_FPE_NWFPE_XP const floatx80 floatx80Constant[] = { - {0x0000, 0x0000000000000000ULL}, /* extended 0.0 */ - {0x3fff, 0x8000000000000000ULL}, /* extended 1.0 */ - {0x4000, 0x8000000000000000ULL}, /* extended 2.0 */ - {0x4000, 0xc000000000000000ULL}, /* extended 3.0 */ - {0x4001, 0x8000000000000000ULL}, /* extended 4.0 */ - {0x4001, 0xa000000000000000ULL}, /* extended 5.0 */ - {0x3ffe, 0x8000000000000000ULL}, /* extended 0.5 */ - {0x4002, 0xa000000000000000ULL} /* extended 10.0 */ + { .high = 0x0000, .low = 0x0000000000000000ULL},/* extended 0.0 */ + { .high = 0x3fff, .low = 0x8000000000000000ULL},/* extended 1.0 */ + { .high = 0x4000, .low = 0x8000000000000000ULL},/* extended 2.0 */ + { .high = 0x4000, .low = 0xc000000000000000ULL},/* extended 3.0 */ + { .high = 0x4001, .low = 0x8000000000000000ULL},/* extended 4.0 */ + { .high = 0x4001, .low = 0xa000000000000000ULL},/* extended 5.0 */ + { .high = 0x3ffe, .low = 0x8000000000000000ULL},/* extended 0.5 */ + { .high = 0x4002, .low = 0xa000000000000000ULL},/* extended 10.0 */ }; #endif diff --git a/arch/arm/nwfpe/softfloat-specialize b/arch/arm/nwfpe/softfloat-specialize index acf4091..d4a4c8e 100644 --- a/arch/arm/nwfpe/softfloat-specialize +++ b/arch/arm/nwfpe/softfloat-specialize @@ -332,6 +332,7 @@ static floatx80 commonNaNToFloatx80( commonNaNT a ) z.low = LIT64( 0xC000000000000000 ) | ( a.high>>1 ); z.high = ( ( (bits16) a.sign )<<15 ) | 0x7FFF; + z.__padding = 0; return z; } diff --git a/arch/arm/nwfpe/softfloat.c b/arch/arm/nwfpe/softfloat.c index f9f0491..0f9656e 100644 --- a/arch/arm/nwfpe/softfloat.c +++ b/arch/arm/nwfpe/softfloat.c @@ -531,6 +531,7 @@ INLINE floatx80 packFloatx80( flag zSign, int32 zExp, bits64 zSig ) z.low = zSig; z.high = ( ( (bits16) zSign )<<15 ) + zExp; + z.__padding = 0; return z; } @@ -2831,6 +2832,7 @@ static floatx80 subFloatx80Sigs( struct roundingData *roundData, floatx80 a, flo roundData->exception |= float_flag_invalid; z.low = floatx80_default_nan_low; z.high = floatx80_default_nan_high; + z.__padding = 0; return z; } if ( aExp == 0 ) { @@ -2950,6 +2952,7 @@ floatx80 floatx80_mul( struct roundingData *roundData, floatx80 a, floatx80 b ) roundData->exception |= float_flag_invalid; z.low = floatx80_default_nan_low; z.high = floatx80_default_nan_high; + z.__padding = 0; return z; } return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) ); @@ -3015,6 +3018,7 @@ floatx80 floatx80_div( struct roundingData *roundData, floatx80 a, floatx80 b ) roundData->exception |= float_flag_invalid; z.low = floatx80_default_nan_low; z.high = floatx80_default_nan_high; + z.__padding = 0; return z; } roundData->exception |= float_flag_divbyzero; @@ -3093,6 +3097,7 @@ floatx80 floatx80_rem( struct roundingData *roundData, floatx80 a, floatx80 b ) roundData->exception |= float_flag_invalid; z.low = floatx80_default_nan_low; z.high = floatx80_default_nan_high; + z.__padding = 0; return z; } normalizeFloatx80Subnormal( bSig, &bExp, &bSig ); @@ -3184,6 +3189,7 @@ floatx80 floatx80_sqrt( struct roundingData *roundData, floatx80 a ) roundData->exception |= float_flag_invalid; z.low = floatx80_default_nan_low; z.high = floatx80_default_nan_high; + z.__padding = 0; return z; } if ( aExp == 0 ) { diff --git a/arch/arm/nwfpe/softfloat.h b/arch/arm/nwfpe/softfloat.h index 1415170..978c699 100644 --- a/arch/arm/nwfpe/softfloat.h +++ b/arch/arm/nwfpe/softfloat.h @@ -51,11 +51,17 @@ input or output the `floatx80' type will be defined. Software IEC/IEEE floating-point types. ------------------------------------------------------------------------------- */ -typedef unsigned long int float32; -typedef unsigned long long float64; +typedef u32 float32; +typedef u64 float64; typedef struct { - unsigned short high; - unsigned long long low; +#ifdef __ARMEB__ + u16 __padding; + u16 high; +#else + u16 high; + u16 __padding; +#endif + u64 low; } floatx80; /* diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c index 1fb16f9..2ede2ee 100644 --- a/arch/arm/plat-omap/ocpi.c +++ b/arch/arm/plat-omap/ocpi.c @@ -25,7 +25,6 @@ #include <linux/config.h> #include <linux/module.h> -#include <linux/version.h> #include <linux/types.h> #include <linux/errno.h> #include <linux/kernel.h> diff --git a/arch/arm26/kernel/process.c b/arch/arm26/kernel/process.c index 9eb9964..15833a0 100644 --- a/arch/arm26/kernel/process.c +++ b/arch/arm26/kernel/process.c @@ -74,15 +74,13 @@ __setup("hlt", hlt_setup); void cpu_idle(void) { /* endless idle loop with no priority at all */ - preempt_disable(); while (1) { - while (!need_resched()) { - local_irq_disable(); - if (!need_resched() && !hlt_counter) - local_irq_enable(); - } + while (!need_resched()) + cpu_relax(); + preempt_enable_no_resched(); + schedule(); + preempt_disable(); } - schedule(); } static char reboot_mode = 'h'; diff --git a/arch/arm26/kernel/ptrace.c b/arch/arm26/kernel/ptrace.c index cf7e977..4e6b735 100644 --- a/arch/arm26/kernel/ptrace.c +++ b/arch/arm26/kernel/ptrace.c @@ -546,7 +546,7 @@ static int ptrace_setfpregs(struct task_struct *tsk, void *ufp) sizeof(struct user_fp)) ? -EFAULT : 0; } -static int do_ptrace(int request, struct task_struct *child, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { unsigned long tmp; int ret; @@ -665,53 +665,6 @@ static int do_ptrace(int request, struct task_struct *child, long addr, long dat return ret; } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) -{ - struct task_struct *child; - int ret; - - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret == 0) - ret = do_ptrace(request, child, addr, data); - -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); - return ret; -} - asmlinkage void syscall_trace(int why, struct pt_regs *regs) { unsigned long ip; diff --git a/arch/cris/arch-v10/README.mm b/arch/cris/arch-v10/README.mm index 6f08903..517d1f02 100644 --- a/arch/cris/arch-v10/README.mm +++ b/arch/cris/arch-v10/README.mm @@ -177,7 +177,7 @@ The example address is 0xd004000c; in binary this is: Given the top-level Page Directory, the offset in that directory is calculated using the upper 8 bits: -extern inline pgd_t * pgd_offset(struct mm_struct * mm, unsigned long address) +static inline pgd_t * pgd_offset(struct mm_struct * mm, unsigned long address) { return mm->pgd + (address >> PGDIR_SHIFT); } @@ -190,14 +190,14 @@ The pgd_t from our example will therefore be the 208'th (0xd0) entry in mm->pgd. Since the Middle Directory does not exist, it is a unity mapping: -extern inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address) +static inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address) { return (pmd_t *) dir; } The Page Table provides the final lookup by using bits 13 to 23 as index: -extern inline pte_t * pte_offset(pmd_t * dir, unsigned long address) +static inline pte_t * pte_offset(pmd_t * dir, unsigned long address) { return (pte_t *) pmd_page(*dir) + ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)); diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c index 201f4c9..f2c5574 100644 --- a/arch/cris/arch-v10/drivers/pcf8563.c +++ b/arch/cris/arch-v10/drivers/pcf8563.c @@ -19,7 +19,6 @@ */ #include <linux/config.h> -#include <linux/version.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/cris/arch-v10/kernel/fasttimer.c b/arch/cris/arch-v10/kernel/fasttimer.c index 094ff45..cac05a5 100644 --- a/arch/cris/arch-v10/kernel/fasttimer.c +++ b/arch/cris/arch-v10/kernel/fasttimer.c @@ -112,7 +112,6 @@ #include <asm/rtc.h> #include <linux/config.h> -#include <linux/version.h> #include <asm/arch/svinto.h> #include <asm/fasttimer.h> diff --git a/arch/cris/arch-v10/kernel/ptrace.c b/arch/cris/arch-v10/kernel/ptrace.c index 130dd21..6cbd34a 100644 --- a/arch/cris/arch-v10/kernel/ptrace.c +++ b/arch/cris/arch-v10/kernel/ptrace.c @@ -76,55 +76,11 @@ ptrace_disable(struct task_struct *child) * (in user space) where the result of the ptrace call is written (instead of * being returned). */ -asmlinkage int -sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret; unsigned long __user *datap = (unsigned long __user *)data; - lock_kernel(); - ret = -EPERM; - - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - - if (child) - get_task_struct(child); - - read_unlock(&tasklist_lock); - - if (!child) - goto out; - - ret = -EPERM; - - if (pid == 1) /* Leave the init process alone! */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* Read word at location address. */ case PTRACE_PEEKTEXT: @@ -289,10 +245,7 @@ sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + return ret; } diff --git a/arch/cris/arch-v10/kernel/signal.c b/arch/cris/arch-v10/kernel/signal.c index 6937719..19bcad0 100644 --- a/arch/cris/arch-v10/kernel/signal.c +++ b/arch/cris/arch-v10/kernel/signal.c @@ -476,7 +476,7 @@ give_sigsegv: * OK, we're invoking a handler */ -extern inline void +static inline void handle_signal(int canrestart, unsigned long sig, siginfo_t *info, struct k_sigaction *ka, sigset_t *oldset, struct pt_regs * regs) diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c index ca72076..501fa52 100644 --- a/arch/cris/arch-v32/drivers/cryptocop.c +++ b/arch/cris/arch-v32/drivers/cryptocop.c @@ -277,7 +277,7 @@ struct file_operations cryptocop_fops = { static void free_cdesc(struct cryptocop_dma_desc *cdesc) { DEBUG(printk("free_cdesc: cdesc 0x%p, from_pool=%d\n", cdesc, cdesc->from_pool)); - if (cdesc->free_buf) kfree(cdesc->free_buf); + kfree(cdesc->free_buf); if (cdesc->from_pool) { unsigned long int flags; @@ -2950,15 +2950,15 @@ static int cryptocop_ioctl_process(struct inode *inode, struct file *filp, unsig put_page(outpages[i]); } - if (digest_result) kfree(digest_result); - if (inpages) kfree(inpages); - if (outpages) kfree(outpages); + kfree(digest_result); + kfree(inpages); + kfree(outpages); if (cop){ - if (cop->tfrm_op.indata) kfree(cop->tfrm_op.indata); - if (cop->tfrm_op.outdata) kfree(cop->tfrm_op.outdata); + kfree(cop->tfrm_op.indata); + kfree(cop->tfrm_op.outdata); kfree(cop); } - if (jc) kfree(jc); + kfree(jc); DEBUG(print_lock_status()); diff --git a/arch/cris/arch-v32/drivers/nandflash.c b/arch/cris/arch-v32/drivers/nandflash.c index fc2a619..93ddea4d 100644 --- a/arch/cris/arch-v32/drivers/nandflash.c +++ b/arch/cris/arch-v32/drivers/nandflash.c @@ -14,7 +14,6 @@ * */ -#include <linux/version.h> #include <linux/slab.h> #include <linux/init.h> #include <linux/module.h> diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c index f894580..d788bda 100644 --- a/arch/cris/arch-v32/drivers/pcf8563.c +++ b/arch/cris/arch-v32/drivers/pcf8563.c @@ -18,7 +18,6 @@ */ #include <linux/config.h> -#include <linux/version.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/types.h> diff --git a/arch/cris/arch-v32/kernel/ptrace.c b/arch/cris/arch-v32/kernel/ptrace.c index 208489d..5528b83 100644 --- a/arch/cris/arch-v32/kernel/ptrace.c +++ b/arch/cris/arch-v32/kernel/ptrace.c @@ -99,55 +99,11 @@ ptrace_disable(struct task_struct *child) } -asmlinkage int -sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret; unsigned long __user *datap = (unsigned long __user *)data; - lock_kernel(); - ret = -EPERM; - - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - - if (child) - get_task_struct(child); - - read_unlock(&tasklist_lock); - - if (!child) - goto out; - - ret = -EPERM; - - if (pid == 1) /* Leave the init process alone! */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* Read word at location address. */ case PTRACE_PEEKTEXT: @@ -347,10 +303,7 @@ sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + return ret; } diff --git a/arch/cris/arch-v32/kernel/signal.c b/arch/cris/arch-v32/kernel/signal.c index 0a3614d..99e59b3 100644 --- a/arch/cris/arch-v32/kernel/signal.c +++ b/arch/cris/arch-v32/kernel/signal.c @@ -513,7 +513,7 @@ give_sigsegv: } /* Invoke a singal handler to, well, handle the signal. */ -extern inline void +static inline void handle_signal(int canrestart, unsigned long sig, siginfo_t *info, struct k_sigaction *ka, sigset_t *oldset, struct pt_regs * regs) diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c index 957f551..13867f4 100644 --- a/arch/cris/arch-v32/kernel/smp.c +++ b/arch/cris/arch-v32/kernel/smp.c @@ -161,6 +161,7 @@ void __init smp_callin(void) REG_WR(intr_vect, irq_regs[cpu], rw_mask, vect_mask); unmask_irq(IPI_INTR_VECT); unmask_irq(TIMER_INTR_VECT); + preempt_disable(); local_irq_enable(); cpu_set(cpu, cpu_online_map); diff --git a/arch/cris/kernel/process.c b/arch/cris/kernel/process.c index 949a0e4..7c80afb 100644 --- a/arch/cris/kernel/process.c +++ b/arch/cris/kernel/process.c @@ -218,7 +218,9 @@ void cpu_idle (void) idle = default_idle; idle(); } + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } diff --git a/arch/cris/mm/ioremap.c b/arch/cris/mm/ioremap.c index a92ac98..1780df3 100644 --- a/arch/cris/mm/ioremap.c +++ b/arch/cris/mm/ioremap.c @@ -16,7 +16,7 @@ #include <asm/tlbflush.h> #include <asm/arch/memmap.h> -extern inline void remap_area_pte(pte_t * pte, unsigned long address, unsigned long size, +static inline void remap_area_pte(pte_t * pte, unsigned long address, unsigned long size, unsigned long phys_addr, pgprot_t prot) { unsigned long end; diff --git a/arch/frv/kernel/process.c b/arch/frv/kernel/process.c index 3001b82..54a4521 100644 --- a/arch/frv/kernel/process.c +++ b/arch/frv/kernel/process.c @@ -77,16 +77,20 @@ void (*idle)(void) = core_sleep_idle; */ void cpu_idle(void) { + int cpu = smp_processor_id(); + /* endless idle loop with no priority at all */ while (1) { while (!need_resched()) { - irq_stat[smp_processor_id()].idle_timestamp = jiffies; + irq_stat[cpu].idle_timestamp = jiffies; if (!frv_dma_inprogress && idle) idle(); } + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } diff --git a/arch/frv/kernel/ptrace.c b/arch/frv/kernel/ptrace.c index cb335a1..f953484 100644 --- a/arch/frv/kernel/ptrace.c +++ b/arch/frv/kernel/ptrace.c @@ -106,48 +106,11 @@ void ptrace_enable(struct task_struct *child) child->thread.frame0->__status |= REG__STATUS_STEP; } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; unsigned long tmp; int ret; - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -351,10 +314,6 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = -EIO; break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); return ret; } diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c index 27f1fce..fe21adf 100644 --- a/arch/h8300/kernel/process.c +++ b/arch/h8300/kernel/process.c @@ -53,22 +53,18 @@ asmlinkage void ret_from_fork(void); #if !defined(CONFIG_H8300H_SIM) && !defined(CONFIG_H8S_SIM) void default_idle(void) { - while(1) { - if (!need_resched()) { - local_irq_enable(); - __asm__("sleep"); - local_irq_disable(); - } - schedule(); - } + local_irq_disable(); + if (!need_resched()) { + local_irq_enable(); + /* XXX: race here! What if need_resched() gets set now? */ + __asm__("sleep"); + } else + local_irq_enable(); } #else void default_idle(void) { - while(1) { - if (need_resched()) - schedule(); - } + cpu_relax(); } #endif void (*idle)(void) = default_idle; @@ -81,7 +77,13 @@ void (*idle)(void) = default_idle; */ void cpu_idle(void) { - idle(); + while (1) { + while (!need_resched()) + idle(); + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + } } void machine_restart(char * __unused) diff --git a/arch/h8300/kernel/ptrace.c b/arch/h8300/kernel/ptrace.c index a569fe4..0ff6f79 100644 --- a/arch/h8300/kernel/ptrace.c +++ b/arch/h8300/kernel/ptrace.c @@ -57,43 +57,10 @@ void ptrace_disable(struct task_struct *child) h8300_disable_trace(child); } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret; - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { case PTRACE_PEEKTEXT: /* read word at location addr. */ case PTRACE_PEEKDATA: { @@ -251,10 +218,6 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = -EIO; break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); return ret; } diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index bac0da7..dbf90ad 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -997,8 +997,21 @@ source "drivers/Kconfig" source "fs/Kconfig" +menu "Instrumentation Support" + depends on EXPERIMENTAL + source "arch/i386/oprofile/Kconfig" +config KPROBES + bool "Kprobes (EXPERIMENTAL)" + help + Kprobes allows you to trap at almost any kernel address and + execute a callback function. register_kprobe() establishes + a probepoint and specifies the callback. Kprobes is useful + for kernel debugging, non-intrusive instrumentation and testing. + If in doubt, say "N". +endmenu + source "arch/i386/Kconfig.debug" source "security/Kconfig" diff --git a/arch/i386/Kconfig.debug b/arch/i386/Kconfig.debug index 5228c40..c48b424 100644 --- a/arch/i386/Kconfig.debug +++ b/arch/i386/Kconfig.debug @@ -22,16 +22,6 @@ config DEBUG_STACKOVERFLOW This option will cause messages to be printed if free stack space drops below a certain limit. -config KPROBES - bool "Kprobes" - depends on DEBUG_KERNEL - help - Kprobes allows you to trap at almost any kernel address and - execute a callback function. register_kprobe() establishes - a probepoint and specifies the callback. Kprobes is useful - for kernel debugging, non-intrusive instrumentation and testing. - If in doubt, say "N". - config DEBUG_STACK_USAGE bool "Stack utilization instrumentation" depends on DEBUG_KERNEL diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c index 9204be6..496a2c9 100644 --- a/arch/i386/kernel/apic.c +++ b/arch/i386/kernel/apic.c @@ -559,14 +559,20 @@ void __devinit setup_local_APIC(void) * If Linux enabled the LAPIC against the BIOS default * disable it down before re-entering the BIOS on shutdown. * Otherwise the BIOS may get confused and not power-off. + * Additionally clear all LVT entries before disable_local_APIC + * for the case where Linux didn't enable the LAPIC. */ void lapic_shutdown(void) { - if (!cpu_has_apic || !enabled_via_apicbase) + if (!cpu_has_apic) return; local_irq_disable(); - disable_local_APIC(); + clear_local_APIC(); + + if (enabled_via_apicbase) + disable_local_APIC(); + local_irq_enable(); } @@ -803,7 +809,6 @@ no_apic: void __init init_apic_mappings(void) { - unsigned int orig_apicid; unsigned long apic_phys; /* @@ -825,11 +830,8 @@ void __init init_apic_mappings(void) * Fetch the APIC ID of the BSP in case we have a * default configuration (or the MP table is broken). */ - orig_apicid = boot_cpu_physical_apicid; - boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID)); - if ((orig_apicid != -1U) && (orig_apicid != boot_cpu_physical_apicid)) - printk(KERN_WARNING "Boot APIC ID in local APIC unexpected (%d vs %d)", - orig_apicid, boot_cpu_physical_apicid); + if (boot_cpu_physical_apicid == -1U) + boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID)); #ifdef CONFIG_X86_IO_APIC { @@ -1259,81 +1261,40 @@ fastcall void smp_error_interrupt(struct pt_regs *regs) } /* - * This initializes the IO-APIC and APIC hardware. + * This initializes the IO-APIC and APIC hardware if this is + * a UP kernel. */ -int __init APIC_init(void) +int __init APIC_init_uniprocessor (void) { - if (enable_local_apic < 0) { - printk(KERN_INFO "APIC disabled\n"); - return -1; - } + if (enable_local_apic < 0) + clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); - /* See if we have a SMP configuration or have forced enabled - * the local apic. - */ - if (!smp_found_config && !acpi_lapic && !cpu_has_apic) { - enable_local_apic = -1; + if (!smp_found_config && !cpu_has_apic) return -1; - } /* - * Complain if the BIOS pretends there is an apic. - * Then get out because we don't have an a local apic. + * Complain if the BIOS pretends there is one. */ if (!cpu_has_apic && APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) { printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n", boot_cpu_physical_apicid); - printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n"); - enable_local_apic = -1; return -1; } verify_local_APIC(); - /* - * Should not be necessary because the MP table should list the boot - * CPU too, but we do it for the sake of robustness anyway. - * Makes no sense to do this check in clustered apic mode, so skip it - */ - if (!check_phys_apicid_present(boot_cpu_physical_apicid)) { - printk("weird, boot CPU (#%d) not listed by the BIOS.\n", - boot_cpu_physical_apicid); - physid_set(boot_cpu_physical_apicid, phys_cpu_present_map); - } - - /* - * Switch from PIC to APIC mode. - */ connect_bsp_APIC(); - setup_local_APIC(); -#ifdef CONFIG_X86_IO_APIC - /* - * Now start the IO-APICs - */ - if (smp_found_config && !skip_ioapic_setup && nr_ioapics) - setup_IO_APIC(); -#endif - return 0; -} + phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid); -void __init APIC_late_time_init(void) -{ - /* Improve our loops per jiffy estimate */ - loops_per_jiffy = ((1000 + HZ - 1)/HZ)*cpu_khz; - boot_cpu_data.loops_per_jiffy = loops_per_jiffy; - cpu_data[0].loops_per_jiffy = loops_per_jiffy; - - /* setup_apic_nmi_watchdog doesn't work properly before cpu_khz is - * initialized. So redo it here to ensure the boot cpu is setup - * properly. - */ - if (nmi_watchdog == NMI_LOCAL_APIC) - setup_apic_nmi_watchdog(); + setup_local_APIC(); #ifdef CONFIG_X86_IO_APIC - if (smp_found_config && !skip_ioapic_setup && nr_ioapics) - IO_APIC_late_time_init(); + if (smp_found_config) + if (!skip_ioapic_setup && nr_ioapics) + setup_IO_APIC(); #endif setup_boot_APIC_clock(); + + return 0; } diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c index d2ef0c2..003548b 100644 --- a/arch/i386/kernel/apm.c +++ b/arch/i386/kernel/apm.c @@ -447,8 +447,7 @@ static char * apm_event_name[] = { "system standby resume", "capabilities change" }; -#define NR_APM_EVENT_NAME \ - (sizeof(apm_event_name) / sizeof(apm_event_name[0])) +#define NR_APM_EVENT_NAME ARRAY_SIZE(apm_event_name) typedef struct lookup_t { int key; @@ -479,7 +478,7 @@ static const lookup_t error_table[] = { { APM_NO_ERROR, "BIOS did not set a return code" }, { APM_NOT_PRESENT, "No APM present" } }; -#define ERROR_COUNT (sizeof(error_table)/sizeof(lookup_t)) +#define ERROR_COUNT ARRAY_SIZE(error_table) /** * apm_error - display an APM error @@ -770,8 +769,26 @@ static int set_system_power_state(u_short state) static int apm_do_idle(void) { u32 eax; + u8 ret = 0; + int idled = 0; + int polling; + + polling = test_thread_flag(TIF_POLLING_NRFLAG); + if (polling) { + clear_thread_flag(TIF_POLLING_NRFLAG); + smp_mb__after_clear_bit(); + } + if (!need_resched()) { + idled = 1; + ret = apm_bios_call_simple(APM_FUNC_IDLE, 0, 0, &eax); + } + if (polling) + set_thread_flag(TIF_POLLING_NRFLAG); + + if (!idled) + return 0; - if (apm_bios_call_simple(APM_FUNC_IDLE, 0, 0, &eax)) { + if (ret) { static unsigned long t; /* This always fails on some SMP boards running UP kernels. diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index 74145a3..c145fb3 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -30,8 +30,6 @@ static int disable_x86_serial_nr __devinitdata = 1; struct cpu_dev * cpu_devs[X86_VENDOR_NUM] = {}; -extern void mcheck_init(struct cpuinfo_x86 *c); - extern int disable_pse; static void default_init(struct cpuinfo_x86 * c) @@ -429,9 +427,8 @@ void __devinit identify_cpu(struct cpuinfo_x86 *c) } /* Init Machine Check Exception if available. */ -#ifdef CONFIG_X86_MCE mcheck_init(c); -#endif + if (c == &boot_cpu_data) sysenter_setup(); enable_sep_cpu(); diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c index caa9f77..871366b 100644 --- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -377,10 +377,9 @@ acpi_cpufreq_cpu_init ( arg0.buffer.length = 12; arg0.buffer.pointer = (u8 *) arg0_buf; - data = kmalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL); + data = kzalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL); if (!data) return (-ENOMEM); - memset(data, 0, sizeof(struct cpufreq_acpi_io)); acpi_io_data[cpu] = data; diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c index 73a5dc5..edcd626 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c @@ -171,10 +171,9 @@ static int get_ranges (unsigned char *pst) unsigned int speed; u8 fid, vid; - powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table) * (number_scales + 1)), GFP_KERNEL); + powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) * (number_scales + 1)), GFP_KERNEL); if (!powernow_table) return -ENOMEM; - memset(powernow_table, 0, (sizeof(struct cpufreq_frequency_table) * (number_scales + 1))); for (j=0 ; j < number_scales; j++) { fid = *pst++; @@ -305,16 +304,13 @@ static int powernow_acpi_init(void) goto err0; } - acpi_processor_perf = kmalloc(sizeof(struct acpi_processor_performance), + acpi_processor_perf = kzalloc(sizeof(struct acpi_processor_performance), GFP_KERNEL); - if (!acpi_processor_perf) { retval = -ENOMEM; goto err0; } - memset(acpi_processor_perf, 0, sizeof(struct acpi_processor_performance)); - if (acpi_processor_register_performance(acpi_processor_perf, 0)) { retval = -EIO; goto err1; @@ -337,14 +333,12 @@ static int powernow_acpi_init(void) goto err2; } - powernow_table = kmalloc((number_scales + 1) * (sizeof(struct cpufreq_frequency_table)), GFP_KERNEL); + powernow_table = kzalloc((number_scales + 1) * (sizeof(struct cpufreq_frequency_table)), GFP_KERNEL); if (!powernow_table) { retval = -ENOMEM; goto err2; } - memset(powernow_table, 0, ((number_scales + 1) * sizeof(struct cpufreq_frequency_table))); - pc.val = (unsigned long) acpi_processor_perf->states[0].control; for (i = 0; i < number_scales; i++) { u8 fid, vid; diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c index 2d5c9ad..68a1fc8 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c @@ -462,7 +462,6 @@ static int check_supported_cpu(unsigned int cpu) oldmask = current->cpus_allowed; set_cpus_allowed(current, cpumask_of_cpu(cpu)); - schedule(); if (smp_processor_id() != cpu) { printk(KERN_ERR "limiting to cpu %u failed\n", cpu); @@ -497,9 +496,7 @@ static int check_supported_cpu(unsigned int cpu) out: set_cpus_allowed(current, oldmask); - schedule(); return rc; - } static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid) @@ -913,7 +910,6 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi /* only run on specific CPU from here on */ oldmask = current->cpus_allowed; set_cpus_allowed(current, cpumask_of_cpu(pol->cpu)); - schedule(); if (smp_processor_id() != pol->cpu) { printk(KERN_ERR "limiting to cpu %u failed\n", pol->cpu); @@ -968,8 +964,6 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi err_out: set_cpus_allowed(current, oldmask); - schedule(); - return ret; } @@ -991,12 +985,11 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol) if (!check_supported_cpu(pol->cpu)) return -ENODEV; - data = kmalloc(sizeof(struct powernow_k8_data), GFP_KERNEL); + data = kzalloc(sizeof(struct powernow_k8_data), GFP_KERNEL); if (!data) { printk(KERN_ERR PFX "unable to alloc powernow_k8_data"); return -ENOMEM; } - memset(data,0,sizeof(struct powernow_k8_data)); data->cpu = pol->cpu; @@ -1026,7 +1019,6 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol) /* only run on specific CPU from here on */ oldmask = current->cpus_allowed; set_cpus_allowed(current, cpumask_of_cpu(pol->cpu)); - schedule(); if (smp_processor_id() != pol->cpu) { printk(KERN_ERR "limiting to cpu %u failed\n", pol->cpu); @@ -1045,7 +1037,6 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol) /* run on any CPU again */ set_cpus_allowed(current, oldmask); - schedule(); pol->governor = CPUFREQ_DEFAULT_GOVERNOR; pol->cpus = cpu_core_map[pol->cpu]; @@ -1080,7 +1071,6 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol) err_out: set_cpus_allowed(current, oldmask); - schedule(); powernow_k8_cpu_exit_acpi(data); kfree(data); @@ -1116,17 +1106,14 @@ static unsigned int powernowk8_get (unsigned int cpu) set_cpus_allowed(current, oldmask); return 0; } - preempt_disable(); - + if (query_current_values_with_pending_wait(data)) goto out; khz = find_khz_freq_from_fid(data->currfid); - out: - preempt_enable_no_resched(); +out: set_cpus_allowed(current, oldmask); - return khz; } diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c index 14659742..edb9873 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c @@ -67,7 +67,7 @@ static const struct cpu_id cpu_ids[] = { [CPU_MP4HT_D0] = {15, 3, 4 }, [CPU_MP4HT_E0] = {15, 4, 1 }, }; -#define N_IDS (sizeof(cpu_ids)/sizeof(cpu_ids[0])) +#define N_IDS ARRAY_SIZE(cpu_ids) struct cpu_model { @@ -423,12 +423,11 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy) } } - centrino_model[cpu] = kmalloc(sizeof(struct cpu_model), GFP_KERNEL); + centrino_model[cpu] = kzalloc(sizeof(struct cpu_model), GFP_KERNEL); if (!centrino_model[cpu]) { result = -ENOMEM; goto err_unreg; } - memset(centrino_model[cpu], 0, sizeof(struct cpu_model)); centrino_model[cpu]->model_name=NULL; centrino_model[cpu]->max_freq = p.states[0].core_frequency * 1000; diff --git a/arch/i386/kernel/cpu/mcheck/k7.c b/arch/i386/kernel/cpu/mcheck/k7.c index 7c6b9c7..fc5d521 100644 --- a/arch/i386/kernel/cpu/mcheck/k7.c +++ b/arch/i386/kernel/cpu/mcheck/k7.c @@ -68,7 +68,7 @@ static fastcall void k7_machine_check(struct pt_regs * regs, long error_code) /* AMD K7 machine check is Intel like */ -void __devinit amd_mcheck_init(struct cpuinfo_x86 *c) +void amd_mcheck_init(struct cpuinfo_x86 *c) { u32 l, h; int i; diff --git a/arch/i386/kernel/cpu/mcheck/mce.c b/arch/i386/kernel/cpu/mcheck/mce.c index 2cf25d2..6170af3 100644 --- a/arch/i386/kernel/cpu/mcheck/mce.c +++ b/arch/i386/kernel/cpu/mcheck/mce.c @@ -16,7 +16,7 @@ #include "mce.h" -int mce_disabled __devinitdata = 0; +int mce_disabled = 0; int nr_mce_banks; EXPORT_SYMBOL_GPL(nr_mce_banks); /* non-fatal.o */ @@ -31,7 +31,7 @@ static fastcall void unexpected_machine_check(struct pt_regs * regs, long error_ void fastcall (*machine_check_vector)(struct pt_regs *, long error_code) = unexpected_machine_check; /* This has to be run for each processor */ -void __devinit mcheck_init(struct cpuinfo_x86 *c) +void mcheck_init(struct cpuinfo_x86 *c) { if (mce_disabled==1) return; diff --git a/arch/i386/kernel/cpu/mcheck/p4.c b/arch/i386/kernel/cpu/mcheck/p4.c index 1d1e885..fd2c459 100644 --- a/arch/i386/kernel/cpu/mcheck/p4.c +++ b/arch/i386/kernel/cpu/mcheck/p4.c @@ -77,7 +77,7 @@ fastcall void smp_thermal_interrupt(struct pt_regs *regs) } /* P4/Xeon Thermal regulation detect and init */ -static void __devinit intel_init_thermal(struct cpuinfo_x86 *c) +static void intel_init_thermal(struct cpuinfo_x86 *c) { u32 l, h; unsigned int cpu = smp_processor_id(); @@ -231,7 +231,7 @@ static fastcall void intel_machine_check(struct pt_regs * regs, long error_code) } -void __devinit intel_p4_mcheck_init(struct cpuinfo_x86 *c) +void intel_p4_mcheck_init(struct cpuinfo_x86 *c) { u32 l, h; int i; diff --git a/arch/i386/kernel/cpu/mcheck/p5.c b/arch/i386/kernel/cpu/mcheck/p5.c index 3a2e24b..94bc43d 100644 --- a/arch/i386/kernel/cpu/mcheck/p5.c +++ b/arch/i386/kernel/cpu/mcheck/p5.c @@ -28,7 +28,7 @@ static fastcall void pentium_machine_check(struct pt_regs * regs, long error_cod } /* Set up machine check reporting for processors with Intel style MCE */ -void __devinit intel_p5_mcheck_init(struct cpuinfo_x86 *c) +void intel_p5_mcheck_init(struct cpuinfo_x86 *c) { u32 l, h; diff --git a/arch/i386/kernel/cpu/mcheck/p6.c b/arch/i386/kernel/cpu/mcheck/p6.c index 979b18b..deeae42 100644 --- a/arch/i386/kernel/cpu/mcheck/p6.c +++ b/arch/i386/kernel/cpu/mcheck/p6.c @@ -79,7 +79,7 @@ static fastcall void intel_machine_check(struct pt_regs * regs, long error_code) } /* Set up machine check reporting for processors with Intel style MCE */ -void __devinit intel_p6_mcheck_init(struct cpuinfo_x86 *c) +void intel_p6_mcheck_init(struct cpuinfo_x86 *c) { u32 l, h; int i; diff --git a/arch/i386/kernel/cpu/mcheck/winchip.c b/arch/i386/kernel/cpu/mcheck/winchip.c index 5b9d2dd..9e424b6 100644 --- a/arch/i386/kernel/cpu/mcheck/winchip.c +++ b/arch/i386/kernel/cpu/mcheck/winchip.c @@ -22,7 +22,7 @@ static fastcall void winchip_machine_check(struct pt_regs * regs, long error_cod } /* Set up machine check reporting on the Winchip C6 series */ -void __devinit winchip_mcheck_init(struct cpuinfo_x86 *c) +void winchip_mcheck_init(struct cpuinfo_x86 *c) { u32 lo, hi; machine_check_vector = winchip_machine_check; diff --git a/arch/i386/kernel/i8259.c b/arch/i386/kernel/i8259.c index d86f249..323ef8a 100644 --- a/arch/i386/kernel/i8259.c +++ b/arch/i386/kernel/i8259.c @@ -435,8 +435,4 @@ void __init init_IRQ(void) setup_irq(FPU_IRQ, &fpu_irq); irq_ctx_init(smp_processor_id()); - -#ifdef CONFIG_X86_LOCAL_APIC - APIC_init(); -#endif } diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index 5a77c52..cc5d7ac 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -2387,15 +2387,11 @@ void __init setup_IO_APIC(void) sync_Arb_IDs(); setup_IO_APIC_irqs(); init_IO_APIC_traps(); + check_timer(); if (!acpi_ioapic) print_IO_APIC(); } -void __init IO_APIC_late_time_init(void) -{ - check_timer(); -} - /* * Called after all the initialization is done. If we didnt find any * APIC bugs then we can allow the modify fast path diff --git a/arch/i386/kernel/ioport.c b/arch/i386/kernel/ioport.c index f2b3765..b59a34d 100644 --- a/arch/i386/kernel/ioport.c +++ b/arch/i386/kernel/ioport.c @@ -108,8 +108,11 @@ asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on) /* * Sets the lazy trigger so that the next I/O operation will * reload the correct bitmap. + * Reset the owner so that a process switch will not set + * tss->io_bitmap_base to IO_BITMAP_OFFSET. */ tss->io_bitmap_base = INVALID_IO_BITMAP_OFFSET_LAZY; + tss->io_bitmap_owner = NULL; put_cpu(); diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index 6345b43..32b0c24 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -31,22 +31,16 @@ #include <linux/config.h> #include <linux/kprobes.h> #include <linux/ptrace.h> -#include <linux/spinlock.h> #include <linux/preempt.h> #include <asm/cacheflush.h> #include <asm/kdebug.h> #include <asm/desc.h> -static struct kprobe *current_kprobe; -static unsigned long kprobe_status, kprobe_old_eflags, kprobe_saved_eflags; -static struct kprobe *kprobe_prev; -static unsigned long kprobe_status_prev, kprobe_old_eflags_prev, kprobe_saved_eflags_prev; -static struct pt_regs jprobe_saved_regs; -static long *jprobe_saved_esp; -/* copy of the kernel stack at the probe fire time */ -static kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE]; void jprobe_return_end(void); +DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); + /* * returns non-zero if opcode modifies the interrupt flag. */ @@ -91,29 +85,30 @@ void __kprobes arch_remove_kprobe(struct kprobe *p) { } -static inline void save_previous_kprobe(void) +static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) { - kprobe_prev = current_kprobe; - kprobe_status_prev = kprobe_status; - kprobe_old_eflags_prev = kprobe_old_eflags; - kprobe_saved_eflags_prev = kprobe_saved_eflags; + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; + kcb->prev_kprobe.old_eflags = kcb->kprobe_old_eflags; + kcb->prev_kprobe.saved_eflags = kcb->kprobe_saved_eflags; } -static inline void restore_previous_kprobe(void) +static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) { - current_kprobe = kprobe_prev; - kprobe_status = kprobe_status_prev; - kprobe_old_eflags = kprobe_old_eflags_prev; - kprobe_saved_eflags = kprobe_saved_eflags_prev; + __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + kcb->kprobe_status = kcb->prev_kprobe.status; + kcb->kprobe_old_eflags = kcb->prev_kprobe.old_eflags; + kcb->kprobe_saved_eflags = kcb->prev_kprobe.saved_eflags; } -static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs) +static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) { - current_kprobe = p; - kprobe_saved_eflags = kprobe_old_eflags + __get_cpu_var(current_kprobe) = p; + kcb->kprobe_saved_eflags = kcb->kprobe_old_eflags = (regs->eflags & (TF_MASK | IF_MASK)); if (is_IF_modifier(p->opcode)) - kprobe_saved_eflags &= ~IF_MASK; + kcb->kprobe_saved_eflags &= ~IF_MASK; } static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) @@ -127,6 +122,7 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) regs->eip = (unsigned long)&p->ainsn.insn; } +/* Called with kretprobe_lock held */ void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) { @@ -157,9 +153,15 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) int ret = 0; kprobe_opcode_t *addr = NULL; unsigned long *lp; + struct kprobe_ctlblk *kcb; - /* We're in an interrupt, but this is clear and BUG()-safe. */ + /* + * We don't want to be preempted for the entire + * duration of kprobe processing + */ preempt_disable(); + kcb = get_kprobe_ctlblk(); + /* Check if the application is using LDT entry for its code segment and * calculate the address by reading the base address from the LDT entry. */ @@ -173,15 +175,12 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) } /* Check we're not actually recursing */ if (kprobe_running()) { - /* We *are* holding lock here, so this is safe. - Disarm the probe we just hit, and ignore it. */ p = get_kprobe(addr); if (p) { - if (kprobe_status == KPROBE_HIT_SS && + if (kcb->kprobe_status == KPROBE_HIT_SS && *p->ainsn.insn == BREAKPOINT_INSTRUCTION) { regs->eflags &= ~TF_MASK; - regs->eflags |= kprobe_saved_eflags; - unlock_kprobes(); + regs->eflags |= kcb->kprobe_saved_eflags; goto no_kprobe; } /* We have reentered the kprobe_handler(), since @@ -190,26 +189,23 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) * just single step on the instruction of the new probe * without calling any user handlers. */ - save_previous_kprobe(); - set_current_kprobe(p, regs); + save_previous_kprobe(kcb); + set_current_kprobe(p, regs, kcb); p->nmissed++; prepare_singlestep(p, regs); - kprobe_status = KPROBE_REENTER; + kcb->kprobe_status = KPROBE_REENTER; return 1; } else { - p = current_kprobe; + p = __get_cpu_var(current_kprobe); if (p->break_handler && p->break_handler(p, regs)) { goto ss_probe; } } - /* If it's not ours, can't be delete race, (we hold lock). */ goto no_kprobe; } - lock_kprobes(); p = get_kprobe(addr); if (!p) { - unlock_kprobes(); if (regs->eflags & VM_MASK) { /* We are in virtual-8086 mode. Return 0 */ goto no_kprobe; @@ -232,8 +228,8 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) goto no_kprobe; } - kprobe_status = KPROBE_HIT_ACTIVE; - set_current_kprobe(p, regs); + set_current_kprobe(p, regs, kcb); + kcb->kprobe_status = KPROBE_HIT_ACTIVE; if (p->pre_handler && p->pre_handler(p, regs)) /* handler has already set things up, so skip ss setup */ @@ -241,7 +237,7 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) ss_probe: prepare_singlestep(p, regs); - kprobe_status = KPROBE_HIT_SS; + kcb->kprobe_status = KPROBE_HIT_SS; return 1; no_kprobe: @@ -269,9 +265,10 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) struct kretprobe_instance *ri = NULL; struct hlist_head *head; struct hlist_node *node, *tmp; - unsigned long orig_ret_address = 0; + unsigned long flags, orig_ret_address = 0; unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline; + spin_lock_irqsave(&kretprobe_lock, flags); head = kretprobe_inst_table_head(current); /* @@ -310,14 +307,15 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address)); regs->eip = orig_ret_address; - unlock_kprobes(); + reset_current_kprobe(); + spin_unlock_irqrestore(&kretprobe_lock, flags); preempt_enable_no_resched(); - /* - * By returning a non-zero value, we are telling - * kprobe_handler() that we have handled unlocking - * and re-enabling preemption. - */ + /* + * By returning a non-zero value, we are telling + * kprobe_handler() that we don't want the post_handler + * to run (and have re-enabled preemption) + */ return 1; } @@ -343,7 +341,8 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) * that is atop the stack is the address following the copied instruction. * We need to make it the address following the original instruction. */ -static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) +static void __kprobes resume_execution(struct kprobe *p, + struct pt_regs *regs, struct kprobe_ctlblk *kcb) { unsigned long *tos = (unsigned long *)®s->esp; unsigned long next_eip = 0; @@ -353,7 +352,7 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) switch (p->ainsn.insn[0]) { case 0x9c: /* pushfl */ *tos &= ~(TF_MASK | IF_MASK); - *tos |= kprobe_old_eflags; + *tos |= kcb->kprobe_old_eflags; break; case 0xc3: /* ret/lret */ case 0xcb: @@ -394,27 +393,30 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) /* * Interrupts are disabled on entry as trap1 is an interrupt gate and they - * remain disabled thoroughout this function. And we hold kprobe lock. + * remain disabled thoroughout this function. */ static inline int post_kprobe_handler(struct pt_regs *regs) { - if (!kprobe_running()) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) return 0; - if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) { - kprobe_status = KPROBE_HIT_SSDONE; - current_kprobe->post_handler(current_kprobe, regs, 0); + if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); } - resume_execution(current_kprobe, regs); - regs->eflags |= kprobe_saved_eflags; + resume_execution(cur, regs, kcb); + regs->eflags |= kcb->kprobe_saved_eflags; /*Restore back the original saved kprobes variables and continue. */ - if (kprobe_status == KPROBE_REENTER) { - restore_previous_kprobe(); + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); goto out; } - unlock_kprobes(); + reset_current_kprobe(); out: preempt_enable_no_resched(); @@ -429,18 +431,19 @@ out: return 1; } -/* Interrupts disabled, kprobe_lock held. */ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) { - if (current_kprobe->fault_handler - && current_kprobe->fault_handler(current_kprobe, regs, trapnr)) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) return 1; - if (kprobe_status & KPROBE_HIT_SS) { - resume_execution(current_kprobe, regs); - regs->eflags |= kprobe_old_eflags; + if (kcb->kprobe_status & KPROBE_HIT_SS) { + resume_execution(cur, regs, kcb); + regs->eflags |= kcb->kprobe_old_eflags; - unlock_kprobes(); + reset_current_kprobe(); preempt_enable_no_resched(); } return 0; @@ -453,39 +456,41 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; + int ret = NOTIFY_DONE; + switch (val) { case DIE_INT3: if (kprobe_handler(args->regs)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_DEBUG: if (post_kprobe_handler(args->regs)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_GPF: - if (kprobe_running() && - kprobe_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; - break; case DIE_PAGE_FAULT: + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); if (kprobe_running() && kprobe_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; + preempt_enable(); break; default: break; } - return NOTIFY_DONE; + return ret; } int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); unsigned long addr; + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - jprobe_saved_regs = *regs; - jprobe_saved_esp = ®s->esp; - addr = (unsigned long)jprobe_saved_esp; + kcb->jprobe_saved_regs = *regs; + kcb->jprobe_saved_esp = ®s->esp; + addr = (unsigned long)(kcb->jprobe_saved_esp); /* * TBD: As Linus pointed out, gcc assumes that the callee @@ -494,7 +499,8 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) * we also save and restore enough stack bytes to cover * the argument area. */ - memcpy(jprobes_stack, (kprobe_opcode_t *) addr, MIN_STACK_SIZE(addr)); + memcpy(kcb->jprobes_stack, (kprobe_opcode_t *)addr, + MIN_STACK_SIZE(addr)); regs->eflags &= ~IF_MASK; regs->eip = (unsigned long)(jp->entry); return 1; @@ -502,36 +508,40 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) void __kprobes jprobe_return(void) { - preempt_enable_no_resched(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + asm volatile (" xchgl %%ebx,%%esp \n" " int3 \n" " .globl jprobe_return_end \n" " jprobe_return_end: \n" " nop \n"::"b" - (jprobe_saved_esp):"memory"); + (kcb->jprobe_saved_esp):"memory"); } int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); u8 *addr = (u8 *) (regs->eip - 1); - unsigned long stack_addr = (unsigned long)jprobe_saved_esp; + unsigned long stack_addr = (unsigned long)(kcb->jprobe_saved_esp); struct jprobe *jp = container_of(p, struct jprobe, kp); if ((addr > (u8 *) jprobe_return) && (addr < (u8 *) jprobe_return_end)) { - if (®s->esp != jprobe_saved_esp) { + if (®s->esp != kcb->jprobe_saved_esp) { struct pt_regs *saved_regs = - container_of(jprobe_saved_esp, struct pt_regs, esp); + container_of(kcb->jprobe_saved_esp, + struct pt_regs, esp); printk("current esp %p does not match saved esp %p\n", - ®s->esp, jprobe_saved_esp); + ®s->esp, kcb->jprobe_saved_esp); printk("Saved registers for jprobe %p\n", jp); show_registers(saved_regs); printk("Current registers\n"); show_registers(regs); BUG(); } - *regs = jprobe_saved_regs; - memcpy((kprobe_opcode_t *) stack_addr, jprobes_stack, + *regs = kcb->jprobe_saved_regs; + memcpy((kprobe_opcode_t *) stack_addr, kcb->jprobes_stack, MIN_STACK_SIZE(stack_addr)); + preempt_enable_no_resched(); return 1; } return 0; diff --git a/arch/i386/kernel/ldt.c b/arch/i386/kernel/ldt.c index fe1ffa5..983f957 100644 --- a/arch/i386/kernel/ldt.c +++ b/arch/i386/kernel/ldt.c @@ -18,6 +18,7 @@ #include <asm/system.h> #include <asm/ldt.h> #include <asm/desc.h> +#include <asm/mmu_context.h> #ifdef CONFIG_SMP /* avoids "defined but not used" warnig */ static void flush_ldt(void *null) diff --git a/arch/i386/kernel/mca.c b/arch/i386/kernel/mca.c index 8600fae..558bb20 100644 --- a/arch/i386/kernel/mca.c +++ b/arch/i386/kernel/mca.c @@ -132,7 +132,7 @@ static struct resource mca_standard_resources[] = { { .start = 0x100, .end = 0x107, .name = "POS (MCA)" } }; -#define MCA_STANDARD_RESOURCES (sizeof(mca_standard_resources)/sizeof(struct resource)) +#define MCA_STANDARD_RESOURCES ARRAY_SIZE(mca_standard_resources) /** * mca_read_and_store_pos - read the POS registers into a memory buffer diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c index 7a14fdf..1cb261f 100644 --- a/arch/i386/kernel/process.c +++ b/arch/i386/kernel/process.c @@ -99,14 +99,22 @@ EXPORT_SYMBOL(enable_hlt); */ void default_idle(void) { + local_irq_enable(); + if (!hlt_counter && boot_cpu_data.hlt_works_ok) { - local_irq_disable(); - if (!need_resched()) - safe_halt(); - else - local_irq_enable(); + clear_thread_flag(TIF_POLLING_NRFLAG); + smp_mb__after_clear_bit(); + while (!need_resched()) { + local_irq_disable(); + if (!need_resched()) + safe_halt(); + else + local_irq_enable(); + } + set_thread_flag(TIF_POLLING_NRFLAG); } else { - cpu_relax(); + while (!need_resched()) + cpu_relax(); } } #ifdef CONFIG_APM_MODULE @@ -120,29 +128,14 @@ EXPORT_SYMBOL(default_idle); */ static void poll_idle (void) { - int oldval; - local_irq_enable(); - /* - * Deal with another CPU just having chosen a thread to - * run here: - */ - oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); - - if (!oldval) { - set_thread_flag(TIF_POLLING_NRFLAG); - asm volatile( - "2:" - "testl %0, %1;" - "rep; nop;" - "je 2b;" - : : "i"(_TIF_NEED_RESCHED), "m" (current_thread_info()->flags)); - - clear_thread_flag(TIF_POLLING_NRFLAG); - } else { - set_need_resched(); - } + asm volatile( + "2:" + "testl %0, %1;" + "rep; nop;" + "je 2b;" + : : "i"(_TIF_NEED_RESCHED), "m" (current_thread_info()->flags)); } #ifdef CONFIG_HOTPLUG_CPU @@ -179,7 +172,9 @@ static inline void play_dead(void) */ void cpu_idle(void) { - int cpu = raw_smp_processor_id(); + int cpu = smp_processor_id(); + + set_thread_flag(TIF_POLLING_NRFLAG); /* endless idle loop with no priority at all */ while (1) { @@ -201,7 +196,9 @@ void cpu_idle(void) __get_cpu_var(irq_stat).idle_timestamp = jiffies; idle(); } + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } @@ -244,15 +241,12 @@ static void mwait_idle(void) { local_irq_enable(); - if (!need_resched()) { - set_thread_flag(TIF_POLLING_NRFLAG); - do { - __monitor((void *)¤t_thread_info()->flags, 0, 0); - if (need_resched()) - break; - __mwait(0, 0); - } while (!need_resched()); - clear_thread_flag(TIF_POLLING_NRFLAG); + while (!need_resched()) { + __monitor((void *)¤t_thread_info()->flags, 0, 0); + smp_mb(); + if (need_resched()) + break; + __mwait(0, 0); } } diff --git a/arch/i386/kernel/ptrace.c b/arch/i386/kernel/ptrace.c index efd11f0..5ffbb4b 100644 --- a/arch/i386/kernel/ptrace.c +++ b/arch/i386/kernel/ptrace.c @@ -354,49 +354,12 @@ ptrace_set_thread_area(struct task_struct *child, return 0; } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; struct user * dummy = NULL; int i, ret; unsigned long __user *datap = (unsigned long __user *)data; - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -663,10 +626,7 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + out_tsk: return ret; } diff --git a/arch/i386/kernel/reboot_fixups.c b/arch/i386/kernel/reboot_fixups.c index c9b8733..10e21a4 100644 --- a/arch/i386/kernel/reboot_fixups.c +++ b/arch/i386/kernel/reboot_fixups.c @@ -10,6 +10,7 @@ #include <asm/delay.h> #include <linux/pci.h> +#include <linux/reboot_fixups.h> static void cs5530a_warm_reset(struct pci_dev *dev) { @@ -42,7 +43,7 @@ void mach_reboot_fixups(void) struct pci_dev *dev; int i; - for (i=0; i < (sizeof(fixups_table)/sizeof(fixups_table[0])); i++) { + for (i=0; i < ARRAY_SIZE(fixups_table); i++) { cur = &(fixups_table[i]); dev = pci_get_device(cur->vendor, cur->device, NULL); if (!dev) diff --git a/arch/i386/kernel/scx200.c b/arch/i386/kernel/scx200.c index 69e203a..9c968ae 100644 --- a/arch/i386/kernel/scx200.c +++ b/arch/i386/kernel/scx200.c @@ -12,6 +12,7 @@ #include <linux/pci.h> #include <linux/scx200.h> +#include <linux/scx200_gpio.h> /* Verify that the configuration block really is there */ #define scx200_cb_probe(base) (inw((base) + SCx200_CBA) == (base)) diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index b48ac635..fdfcb0c 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -129,9 +129,7 @@ struct drive_info_struct { char dummy[32]; } drive_info; EXPORT_SYMBOL(drive_info); #endif struct screen_info screen_info; -#ifdef CONFIG_VT EXPORT_SYMBOL(screen_info); -#endif struct apm_info apm_info; EXPORT_SYMBOL(apm_info); struct sys_desc_table_struct { diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 5a2bbe0..bc5a9d9 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -68,11 +68,9 @@ EXPORT_SYMBOL(smp_num_siblings); /* Package ID of each logical CPU */ int phys_proc_id[NR_CPUS] __read_mostly = {[0 ... NR_CPUS-1] = BAD_APICID}; -EXPORT_SYMBOL(phys_proc_id); /* Core ID of each logical CPU */ int cpu_core_id[NR_CPUS] __read_mostly = {[0 ... NR_CPUS-1] = BAD_APICID}; -EXPORT_SYMBOL(cpu_core_id); cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly; EXPORT_SYMBOL(cpu_sibling_map); @@ -487,6 +485,7 @@ static void __devinit start_secondary(void *unused) * things done here to the most necessary things. */ cpu_init(); + preempt_disable(); smp_callin(); while (!cpu_isset(smp_processor_id(), smp_commenced_mask)) rep_nop(); @@ -612,7 +611,7 @@ static inline void __inquire_remote_apic(int apicid) printk("Inquiring remote APIC #%d...\n", apicid); - for (i = 0; i < sizeof(regs) / sizeof(*regs); i++) { + for (i = 0; i < ARRAY_SIZE(regs); i++) { printk("... APIC #%d %s: ", apicid, names[i]); /* @@ -1078,16 +1077,6 @@ void *xquad_portio; EXPORT_SYMBOL(xquad_portio); #endif -/* - * Fall back to non SMP mode after errors. - * - */ -static __init void disable_smp(void) -{ - cpu_set(0, cpu_sibling_map[0]); - cpu_set(0, cpu_core_map[0]); -} - static void __init smp_boot_cpus(unsigned int max_cpus) { int apicid, cpu, bit, kicked; @@ -1100,6 +1089,7 @@ static void __init smp_boot_cpus(unsigned int max_cpus) printk("CPU%d: ", 0); print_cpu_info(&cpu_data[0]); + boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID)); boot_cpu_logical_apicid = logical_smp_processor_id(); x86_cpu_to_apicid[0] = boot_cpu_physical_apicid; @@ -1111,27 +1101,68 @@ static void __init smp_boot_cpus(unsigned int max_cpus) cpus_clear(cpu_core_map[0]); cpu_set(0, cpu_core_map[0]); - map_cpu_to_logical_apicid(); - /* * If we couldn't find an SMP configuration at boot time, * get out of here now! */ if (!smp_found_config && !acpi_lapic) { printk(KERN_NOTICE "SMP motherboard not detected.\n"); - disable_smp(); + smpboot_clear_io_apic_irqs(); + phys_cpu_present_map = physid_mask_of_physid(0); + if (APIC_init_uniprocessor()) + printk(KERN_NOTICE "Local APIC not detected." + " Using dummy APIC emulation.\n"); + map_cpu_to_logical_apicid(); + cpu_set(0, cpu_sibling_map[0]); + cpu_set(0, cpu_core_map[0]); + return; + } + + /* + * Should not be necessary because the MP table should list the boot + * CPU too, but we do it for the sake of robustness anyway. + * Makes no sense to do this check in clustered apic mode, so skip it + */ + if (!check_phys_apicid_present(boot_cpu_physical_apicid)) { + printk("weird, boot CPU (#%d) not listed by the BIOS.\n", + boot_cpu_physical_apicid); + physid_set(hard_smp_processor_id(), phys_cpu_present_map); + } + + /* + * If we couldn't find a local APIC, then get out of here now! + */ + if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) && !cpu_has_apic) { + printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n", + boot_cpu_physical_apicid); + printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n"); + smpboot_clear_io_apic_irqs(); + phys_cpu_present_map = physid_mask_of_physid(0); + cpu_set(0, cpu_sibling_map[0]); + cpu_set(0, cpu_core_map[0]); return; } + verify_local_APIC(); + /* * If SMP should be disabled, then really disable it! */ - if (!max_cpus || (enable_local_apic < 0)) { - printk(KERN_INFO "SMP mode deactivated.\n"); - disable_smp(); + if (!max_cpus) { + smp_found_config = 0; + printk(KERN_INFO "SMP mode deactivated, forcing use of dummy APIC emulation.\n"); + smpboot_clear_io_apic_irqs(); + phys_cpu_present_map = physid_mask_of_physid(0); + cpu_set(0, cpu_sibling_map[0]); + cpu_set(0, cpu_core_map[0]); return; } + connect_bsp_APIC(); + setup_local_APIC(); + map_cpu_to_logical_apicid(); + + setup_portio_remap(); /* @@ -1212,6 +1243,10 @@ static void __init smp_boot_cpus(unsigned int max_cpus) cpu_set(0, cpu_sibling_map[0]); cpu_set(0, cpu_core_map[0]); + smpboot_setup_io_apic(); + + setup_boot_APIC_clock(); + /* * Synchronize the TSC with the AP */ diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c index 07471bb..41c5b2d 100644 --- a/arch/i386/kernel/time.c +++ b/arch/i386/kernel/time.c @@ -440,8 +440,8 @@ static int time_init_device(void) device_initcall(time_init_device); -extern void (*late_time_init)(void); #ifdef CONFIG_HPET_TIMER +extern void (*late_time_init)(void); /* Duplicate of time_init() below, with hpet_enable part added */ static void __init hpet_time_init(void) { @@ -458,11 +458,6 @@ static void __init hpet_time_init(void) printk(KERN_INFO "Using %s for high-res timesource\n",cur_timer->name); time_init_hook(); - -#ifdef CONFIG_X86_LOCAL_APIC - if (enable_local_apic >= 0) - APIC_late_time_init(); -#endif } #endif @@ -487,9 +482,4 @@ void __init time_init(void) printk(KERN_INFO "Using %s for high-res timesource\n",cur_timer->name); time_init_hook(); - -#ifdef CONFIG_X86_LOCAL_APIC - if (enable_local_apic >= 0) - late_time_init = APIC_late_time_init; -#endif } diff --git a/arch/i386/oprofile/Kconfig b/arch/i386/oprofile/Kconfig index 5ade198..d8a8408 100644 --- a/arch/i386/oprofile/Kconfig +++ b/arch/i386/oprofile/Kconfig @@ -1,7 +1,3 @@ - -menu "Profiling support" - depends on EXPERIMENTAL - config PROFILING bool "Profiling support (EXPERIMENTAL)" help @@ -19,5 +15,3 @@ config OPROFILE If unsure, say N. -endmenu - diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c index 330fd2b..3984226 100644 --- a/arch/i386/pci/fixup.c +++ b/arch/i386/pci/fixup.c @@ -398,7 +398,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video); */ static u16 toshiba_line_size; -static struct dmi_system_id __devinit toshiba_ohci1394_dmi_table[] = { +static struct dmi_system_id __devinitdata toshiba_ohci1394_dmi_table[] = { { .ident = "Toshiba PS5 based laptop", .matches = { diff --git a/arch/i386/power/cpu.c b/arch/i386/power/cpu.c index 1f15726..50a0bef 100644 --- a/arch/i386/power/cpu.c +++ b/arch/i386/power/cpu.c @@ -118,6 +118,7 @@ void __restore_processor_state(struct saved_context *ctxt) fix_processor_context(); do_fpu_end(); mtrr_ap_init(); + mcheck_init(&boot_cpu_data); } void restore_processor_state(void) diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 1642375..d4de8a4 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -26,6 +26,10 @@ config MMU bool default y +config SWIOTLB + bool + default y + config RWSEM_XCHGADD_ALGORITHM bool default y @@ -187,6 +191,7 @@ config IOSAPIC config IA64_SGI_SN_XP tristate "Support communication between SGI SSIs" + depends on IA64_GENERIC || IA64_SGI_SN2 select IA64_UNCACHED_ALLOCATOR help An SGI machine can be divided into multiple Single System @@ -422,8 +427,21 @@ config GENERIC_PENDING_IRQ source "arch/ia64/hp/sim/Kconfig" +menu "Instrumentation Support" + depends on EXPERIMENTAL + source "arch/ia64/oprofile/Kconfig" +config KPROBES + bool "Kprobes (EXPERIMENTAL)" + help + Kprobes allows you to trap at almost any kernel address and + execute a callback function. register_kprobe() establishes + a probepoint and specifies the callback. Kprobes is useful + for kernel debugging, non-intrusive instrumentation and testing. + If in doubt, say "N". +endmenu + source "arch/ia64/Kconfig.debug" source "security/Kconfig" diff --git a/arch/ia64/Kconfig.debug b/arch/ia64/Kconfig.debug index fda67ac..de9d507 100644 --- a/arch/ia64/Kconfig.debug +++ b/arch/ia64/Kconfig.debug @@ -2,17 +2,6 @@ menu "Kernel hacking" source "lib/Kconfig.debug" -config KPROBES - bool "Kprobes" - depends on DEBUG_KERNEL - help - Kprobes allows you to trap at almost any kernel address and - execute a callback function. register_kprobe() establishes - a probepoint and specifies the callback. Kprobes is useful - for kernel debugging, non-intrusive instrumentation and testing. - If in doubt, say "N". - - choice prompt "Physical memory granularity" default IA64_GRANULE_64MB diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c index b42ec37..19ee635 100644 --- a/arch/ia64/hp/sim/simserial.c +++ b/arch/ia64/hp/sim/simserial.c @@ -642,10 +642,8 @@ static void rs_close(struct tty_struct *tty, struct file * filp) info->event = 0; info->tty = 0; if (info->blocked_open) { - if (info->close_delay) { - current->state = TASK_INTERRUPTIBLE; - schedule_timeout(info->close_delay); - } + if (info->close_delay) + schedule_timeout_interruptible(info->close_delay); wake_up_interruptible(&info->open_wait); } info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); diff --git a/arch/ia64/ia32/ia32_ioctl.c b/arch/ia64/ia32/ia32_ioctl.c index 164b211..8873939 100644 --- a/arch/ia64/ia32/ia32_ioctl.c +++ b/arch/ia64/ia32/ia32_ioctl.c @@ -29,10 +29,8 @@ #define CODE #include "compat_ioctl.c" -typedef int (* ioctl32_handler_t)(unsigned int, unsigned int, unsigned long, struct file *); - #define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL((cmd),sys_ioctl) -#define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl32_handler_t)(handler), NULL }, +#define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl_trans_handler_t)(handler), NULL }, #define IOCTL_TABLE_START \ struct ioctl_trans ioctl_start[] = { #define IOCTL_TABLE_END \ diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c index 471086b..801eeae 100644 --- a/arch/ia64/kernel/kprobes.c +++ b/arch/ia64/kernel/kprobes.c @@ -26,7 +26,6 @@ #include <linux/config.h> #include <linux/kprobes.h> #include <linux/ptrace.h> -#include <linux/spinlock.h> #include <linux/string.h> #include <linux/slab.h> #include <linux/preempt.h> @@ -38,13 +37,8 @@ extern void jprobe_inst_return(void); -/* kprobe_status settings */ -#define KPROBE_HIT_ACTIVE 0x00000001 -#define KPROBE_HIT_SS 0x00000002 - -static struct kprobe *current_kprobe, *kprobe_prev; -static unsigned long kprobe_status, kprobe_status_prev; -static struct pt_regs jprobe_saved_regs; +DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); enum instruction_type {A, I, M, F, B, L, X, u}; static enum instruction_type bundle_encoding[32][3] = { @@ -313,21 +307,22 @@ static int __kprobes valid_kprobe_addr(int template, int slot, return 0; } -static inline void save_previous_kprobe(void) +static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) { - kprobe_prev = current_kprobe; - kprobe_status_prev = kprobe_status; + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; } -static inline void restore_previous_kprobe(void) +static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) { - current_kprobe = kprobe_prev; - kprobe_status = kprobe_status_prev; + __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + kcb->kprobe_status = kcb->prev_kprobe.status; } -static inline void set_current_kprobe(struct kprobe *p) +static inline void set_current_kprobe(struct kprobe *p, + struct kprobe_ctlblk *kcb) { - current_kprobe = p; + __get_cpu_var(current_kprobe) = p; } static void kretprobe_trampoline(void) @@ -347,11 +342,12 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) struct kretprobe_instance *ri = NULL; struct hlist_head *head; struct hlist_node *node, *tmp; - unsigned long orig_ret_address = 0; + unsigned long flags, orig_ret_address = 0; unsigned long trampoline_address = ((struct fnptr *)kretprobe_trampoline)->ip; - head = kretprobe_inst_table_head(current); + spin_lock_irqsave(&kretprobe_lock, flags); + head = kretprobe_inst_table_head(current); /* * It is possible to have multiple instances associated with a given @@ -367,9 +363,9 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) * kretprobe_trampoline */ hlist_for_each_entry_safe(ri, node, tmp, head, hlist) { - if (ri->task != current) + if (ri->task != current) /* another task is sharing our hash bucket */ - continue; + continue; if (ri->rp && ri->rp->handler) ri->rp->handler(ri, regs); @@ -389,17 +385,19 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address)); regs->cr_iip = orig_ret_address; - unlock_kprobes(); + reset_current_kprobe(); + spin_unlock_irqrestore(&kretprobe_lock, flags); preempt_enable_no_resched(); - /* - * By returning a non-zero value, we are telling - * kprobe_handler() that we have handled unlocking - * and re-enabling preemption. - */ - return 1; + /* + * By returning a non-zero value, we are telling + * kprobe_handler() that we don't want the post_handler + * to run (and have re-enabled preemption) + */ + return 1; } +/* Called with kretprobe_lock held */ void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) { @@ -606,17 +604,22 @@ static int __kprobes pre_kprobes_handler(struct die_args *args) int ret = 0; struct pt_regs *regs = args->regs; kprobe_opcode_t *addr = (kprobe_opcode_t *)instruction_pointer(regs); + struct kprobe_ctlblk *kcb; + /* + * We don't want to be preempted for the entire + * duration of kprobe processing + */ preempt_disable(); + kcb = get_kprobe_ctlblk(); /* Handle recursion cases */ if (kprobe_running()) { p = get_kprobe(addr); if (p) { - if ( (kprobe_status == KPROBE_HIT_SS) && + if ((kcb->kprobe_status == KPROBE_HIT_SS) && (p->ainsn.inst_flag == INST_FLAG_BREAK_INST)) { ia64_psr(regs)->ss = 0; - unlock_kprobes(); goto no_kprobe; } /* We have reentered the pre_kprobe_handler(), since @@ -625,17 +628,17 @@ static int __kprobes pre_kprobes_handler(struct die_args *args) * just single step on the instruction of the new probe * without calling any user handlers. */ - save_previous_kprobe(); - set_current_kprobe(p); + save_previous_kprobe(kcb); + set_current_kprobe(p, kcb); p->nmissed++; prepare_ss(p, regs); - kprobe_status = KPROBE_REENTER; + kcb->kprobe_status = KPROBE_REENTER; return 1; } else if (args->err == __IA64_BREAK_JPROBE) { /* * jprobe instrumented function just completed */ - p = current_kprobe; + p = __get_cpu_var(current_kprobe); if (p->break_handler && p->break_handler(p, regs)) { goto ss_probe; } @@ -645,10 +648,8 @@ static int __kprobes pre_kprobes_handler(struct die_args *args) } } - lock_kprobes(); p = get_kprobe(addr); if (!p) { - unlock_kprobes(); if (!is_ia64_break_inst(regs)) { /* * The breakpoint instruction was removed right @@ -665,8 +666,8 @@ static int __kprobes pre_kprobes_handler(struct die_args *args) goto no_kprobe; } - kprobe_status = KPROBE_HIT_ACTIVE; - set_current_kprobe(p); + set_current_kprobe(p, kcb); + kcb->kprobe_status = KPROBE_HIT_ACTIVE; if (p->pre_handler && p->pre_handler(p, regs)) /* @@ -678,7 +679,7 @@ static int __kprobes pre_kprobes_handler(struct die_args *args) ss_probe: prepare_ss(p, regs); - kprobe_status = KPROBE_HIT_SS; + kcb->kprobe_status = KPROBE_HIT_SS; return 1; no_kprobe: @@ -688,23 +689,25 @@ no_kprobe: static int __kprobes post_kprobes_handler(struct pt_regs *regs) { - if (!kprobe_running()) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) return 0; - if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) { - kprobe_status = KPROBE_HIT_SSDONE; - current_kprobe->post_handler(current_kprobe, regs, 0); + if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); } - resume_execution(current_kprobe, regs); + resume_execution(cur, regs); /*Restore back the original saved kprobes variables and continue. */ - if (kprobe_status == KPROBE_REENTER) { - restore_previous_kprobe(); + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); goto out; } - - unlock_kprobes(); + reset_current_kprobe(); out: preempt_enable_no_resched(); @@ -713,16 +716,15 @@ out: static int __kprobes kprobes_fault_handler(struct pt_regs *regs, int trapnr) { - if (!kprobe_running()) - return 0; + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - if (current_kprobe->fault_handler && - current_kprobe->fault_handler(current_kprobe, regs, trapnr)) + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) return 1; - if (kprobe_status & KPROBE_HIT_SS) { - resume_execution(current_kprobe, regs); - unlock_kprobes(); + if (kcb->kprobe_status & KPROBE_HIT_SS) { + resume_execution(cur, regs); + reset_current_kprobe(); preempt_enable_no_resched(); } @@ -733,31 +735,42 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; + int ret = NOTIFY_DONE; + switch(val) { case DIE_BREAK: - if (pre_kprobes_handler(args)) - return NOTIFY_STOP; + /* err is break number from ia64_bad_break() */ + if (args->err == 0x80200 || args->err == 0x80300) + if (pre_kprobes_handler(args)) + ret = NOTIFY_STOP; break; - case DIE_SS: - if (post_kprobes_handler(args->regs)) - return NOTIFY_STOP; + case DIE_FAULT: + /* err is vector number from ia64_fault() */ + if (args->err == 36) + if (post_kprobes_handler(args->regs)) + ret = NOTIFY_STOP; break; case DIE_PAGE_FAULT: - if (kprobes_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); + if (kprobe_running() && + kprobes_fault_handler(args->regs, args->trapnr)) + ret = NOTIFY_STOP; + preempt_enable(); default: break; } - return NOTIFY_DONE; + return ret; } int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); unsigned long addr = ((struct fnptr *)(jp->entry))->ip; + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); /* save architectural state */ - jprobe_saved_regs = *regs; + kcb->jprobe_saved_regs = *regs; /* after rfi, execute the jprobe instrumented function */ regs->cr_iip = addr & ~0xFULL; @@ -775,7 +788,10 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { - *regs = jprobe_saved_regs; + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + *regs = kcb->jprobe_saved_regs; + preempt_enable_no_resched(); return 1; } diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 52c47da..355af15 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -51,6 +51,9 @@ * * 2005-08-12 Keith Owens <kaos@sgi.com> * Convert MCA/INIT handlers to use per event stacks and SAL/OS state. + * + * 2005-10-07 Keith Owens <kaos@sgi.com> + * Add notify_die() hooks. */ #include <linux/config.h> #include <linux/types.h> @@ -58,7 +61,6 @@ #include <linux/sched.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/kallsyms.h> #include <linux/smp_lock.h> #include <linux/bootmem.h> #include <linux/acpi.h> @@ -69,6 +71,7 @@ #include <linux/workqueue.h> #include <asm/delay.h> +#include <asm/kdebug.h> #include <asm/machvec.h> #include <asm/meminit.h> #include <asm/page.h> @@ -132,6 +135,14 @@ extern void salinfo_log_wakeup(int type, u8 *buffer, u64 size, int irqsafe); static int mca_init; + +static void inline +ia64_mca_spin(const char *func) +{ + printk(KERN_EMERG "%s: spinning here, not returning to SAL\n", func); + while (1) + cpu_relax(); +} /* * IA64_MCA log support */ @@ -526,13 +537,16 @@ ia64_mca_wakeup_all(void) * Outputs : None */ static irqreturn_t -ia64_mca_rendez_int_handler(int rendez_irq, void *arg, struct pt_regs *ptregs) +ia64_mca_rendez_int_handler(int rendez_irq, void *arg, struct pt_regs *regs) { unsigned long flags; int cpu = smp_processor_id(); /* Mask all interrupts */ local_irq_save(flags); + if (notify_die(DIE_MCA_RENDZVOUS_ENTER, "MCA", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_DONE; /* Register with the SAL monarch that the slave has @@ -540,10 +554,18 @@ ia64_mca_rendez_int_handler(int rendez_irq, void *arg, struct pt_regs *ptregs) */ ia64_sal_mc_rendez(); + if (notify_die(DIE_MCA_RENDZVOUS_PROCESS, "MCA", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); + /* Wait for the monarch cpu to exit. */ while (monarch_cpu != -1) cpu_relax(); /* spin until monarch leaves */ + if (notify_die(DIE_MCA_RENDZVOUS_LEAVE, "MCA", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); + /* Enable all interrupts */ local_irq_restore(flags); return IRQ_HANDLED; @@ -933,6 +955,9 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw, oops_in_progress = 1; /* FIXME: make printk NMI/MCA/INIT safe */ previous_current = ia64_mca_modify_original_stack(regs, sw, sos, "MCA"); monarch_cpu = cpu; + if (notify_die(DIE_MCA_MONARCH_ENTER, "MCA", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); ia64_wait_for_slaves(cpu); /* Wakeup all the processors which are spinning in the rendezvous loop. @@ -942,6 +967,9 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw, * spinning in SAL does not work. */ ia64_mca_wakeup_all(); + if (notify_die(DIE_MCA_MONARCH_PROCESS, "MCA", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); /* Get the MCA error record and log it */ ia64_mca_log_sal_error_record(SAL_INFO_TYPE_MCA); @@ -960,6 +988,9 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw, ia64_sal_clear_state_info(SAL_INFO_TYPE_MCA); sos->os_status = IA64_MCA_CORRECTED; } + if (notify_die(DIE_MCA_MONARCH_LEAVE, "MCA", regs, 0, 0, recover) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); set_curr_task(cpu, previous_current); monarch_cpu = -1; @@ -1188,6 +1219,37 @@ ia64_mca_cpe_poll (unsigned long dummy) #endif /* CONFIG_ACPI */ +static int +default_monarch_init_process(struct notifier_block *self, unsigned long val, void *data) +{ + int c; + struct task_struct *g, *t; + if (val != DIE_INIT_MONARCH_PROCESS) + return NOTIFY_DONE; + printk(KERN_ERR "Processes interrupted by INIT -"); + for_each_online_cpu(c) { + struct ia64_sal_os_state *s; + t = __va(__per_cpu_mca[c] + IA64_MCA_CPU_INIT_STACK_OFFSET); + s = (struct ia64_sal_os_state *)((char *)t + MCA_SOS_OFFSET); + g = s->prev_task; + if (g) { + if (g->pid) + printk(" %d", g->pid); + else + printk(" %d (cpu %d task 0x%p)", g->pid, task_cpu(g), g); + } + } + printk("\n\n"); + if (read_trylock(&tasklist_lock)) { + do_each_thread (g, t) { + printk("\nBacktrace of pid %d (%s)\n", t->pid, t->comm); + show_stack(t, NULL); + } while_each_thread (g, t); + read_unlock(&tasklist_lock); + } + return NOTIFY_DONE; +} + /* * C portion of the OS INIT handler * @@ -1212,8 +1274,7 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw, static atomic_t slaves; static atomic_t monarchs; task_t *previous_current; - int cpu = smp_processor_id(), c; - struct task_struct *g, *t; + int cpu = smp_processor_id(); oops_in_progress = 1; /* FIXME: make printk NMI/MCA/INIT safe */ console_loglevel = 15; /* make sure printks make it to console */ @@ -1253,8 +1314,17 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw, ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_INIT; while (monarch_cpu == -1) cpu_relax(); /* spin until monarch enters */ + if (notify_die(DIE_INIT_SLAVE_ENTER, "INIT", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); + if (notify_die(DIE_INIT_SLAVE_PROCESS, "INIT", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); while (monarch_cpu != -1) cpu_relax(); /* spin until monarch leaves */ + if (notify_die(DIE_INIT_SLAVE_LEAVE, "INIT", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); printk("Slave on cpu %d returning to normal service.\n", cpu); set_curr_task(cpu, previous_current); ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE; @@ -1263,6 +1333,9 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw, } monarch_cpu = cpu; + if (notify_die(DIE_INIT_MONARCH_ENTER, "INIT", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); /* * Wait for a bit. On some machines (e.g., HP's zx2000 and zx6000, INIT can be @@ -1273,27 +1346,16 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw, printk("Delaying for 5 seconds...\n"); udelay(5*1000000); ia64_wait_for_slaves(cpu); - printk(KERN_ERR "Processes interrupted by INIT -"); - for_each_online_cpu(c) { - struct ia64_sal_os_state *s; - t = __va(__per_cpu_mca[c] + IA64_MCA_CPU_INIT_STACK_OFFSET); - s = (struct ia64_sal_os_state *)((char *)t + MCA_SOS_OFFSET); - g = s->prev_task; - if (g) { - if (g->pid) - printk(" %d", g->pid); - else - printk(" %d (cpu %d task 0x%p)", g->pid, task_cpu(g), g); - } - } - printk("\n\n"); - if (read_trylock(&tasklist_lock)) { - do_each_thread (g, t) { - printk("\nBacktrace of pid %d (%s)\n", t->pid, t->comm); - show_stack(t, NULL); - } while_each_thread (g, t); - read_unlock(&tasklist_lock); - } + /* If nobody intercepts DIE_INIT_MONARCH_PROCESS then we drop through + * to default_monarch_init_process() above and just print all the + * tasks. + */ + if (notify_die(DIE_INIT_MONARCH_PROCESS, "INIT", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); + if (notify_die(DIE_INIT_MONARCH_LEAVE, "INIT", regs, 0, 0, 0) + == NOTIFY_STOP) + ia64_mca_spin(__FUNCTION__); printk("\nINIT dump complete. Monarch on cpu %d returning to normal service.\n", cpu); atomic_dec(&monarchs); set_curr_task(cpu, previous_current); @@ -1462,6 +1524,10 @@ ia64_mca_init(void) s64 rc; struct ia64_sal_retval isrv; u64 timeout = IA64_MCA_RENDEZ_TIMEOUT; /* platform specific */ + static struct notifier_block default_init_monarch_nb = { + .notifier_call = default_monarch_init_process, + .priority = 0/* we need to notified last */ + }; IA64_MCA_DEBUG("%s: begin\n", __FUNCTION__); @@ -1555,6 +1621,10 @@ ia64_mca_init(void) "(status %ld)\n", rc); return; } + if (register_die_notifier(&default_init_monarch_nb)) { + printk(KERN_ERR "Failed to register default monarch INIT process\n"); + return; + } IA64_MCA_DEBUG("%s: registered OS INIT handler with SAL\n", __FUNCTION__); diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c index f081c60..3492e32 100644 --- a/arch/ia64/kernel/mca_drv.c +++ b/arch/ia64/kernel/mca_drv.c @@ -88,7 +88,7 @@ mca_page_isolate(unsigned long paddr) if (!ia64_phys_addr_valid(paddr)) return ISOLATE_NONE; - if (!pfn_valid(paddr)) + if (!pfn_valid(paddr >> PAGE_SHIFT)) return ISOLATE_NONE; /* convert physical address to physical page number */ @@ -108,6 +108,7 @@ mca_page_isolate(unsigned long paddr) return ISOLATE_NG; /* add attribute 'Reserved' and register the page */ + get_page(p); SetPageReserved(p); page_isolate[num_page_isolate++] = p; @@ -546,9 +547,20 @@ recover_from_processor_error(int platform, slidx_table_t *slidx, (pal_processor_state_info_t*)peidx_psp(peidx); /* - * We cannot recover errors with other than bus_check. + * Processor recovery status must key off of the PAL recovery + * status in the Processor State Parameter. */ - if (psp->cc || psp->rc || psp->uc) + + /* + * The machine check is corrected. + */ + if (psp->cm == 1) + return 1; + + /* + * The error was not contained. Software must be reset. + */ + if (psp->us || psp->ci == 0) return 0; /* @@ -569,8 +581,6 @@ recover_from_processor_error(int platform, slidx_table_t *slidx, return 0; if (pbci->eb && pbci->bsi > 0) return 0; - if (psp->ci == 0) - return 0; /* * This is a local MCA and estimated as recoverble external bus error. diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index f7dfc10..410d480 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -4940,7 +4940,7 @@ abort_locked: if (call_made && PFM_CMD_RW_ARG(cmd) && copy_to_user(arg, args_k, base_sz*count)) ret = -EFAULT; error_args: - if (args_k) kfree(args_k); + kfree(args_k); DPRINT(("cmd=%s ret=%ld\n", PFM_CMD_NAME(cmd), ret)); diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c index 051e050..e92ea64 100644 --- a/arch/ia64/kernel/process.c +++ b/arch/ia64/kernel/process.c @@ -4,6 +4,9 @@ * Copyright (C) 1998-2003 Hewlett-Packard Co * David Mosberger-Tang <davidm@hpl.hp.com> * 04/11/17 Ashok Raj <ashok.raj@intel.com> Added CPU Hotplug Support + * + * 2005-10-07 Keith Owens <kaos@sgi.com> + * Add notify_die() hooks. */ #define __KERNEL_SYSCALLS__ /* see <asm/unistd.h> */ #include <linux/config.h> @@ -34,6 +37,7 @@ #include <asm/elf.h> #include <asm/ia32.h> #include <asm/irq.h> +#include <asm/kdebug.h> #include <asm/pgalloc.h> #include <asm/processor.h> #include <asm/sal.h> @@ -197,11 +201,15 @@ void default_idle (void) { local_irq_enable(); - while (!need_resched()) - if (can_do_pal_halt) - safe_halt(); - else + while (!need_resched()) { + if (can_do_pal_halt) { + local_irq_disable(); + if (!need_resched()) + safe_halt(); + local_irq_enable(); + } else cpu_relax(); + } } #ifdef CONFIG_HOTPLUG_CPU @@ -263,16 +271,16 @@ void __attribute__((noreturn)) cpu_idle (void) { void (*mark_idle)(int) = ia64_mark_idle; + int cpu = smp_processor_id(); + set_thread_flag(TIF_POLLING_NRFLAG); /* endless idle loop with no priority at all */ while (1) { + if (!need_resched()) { + void (*idle)(void); #ifdef CONFIG_SMP - if (!need_resched()) min_xtp(); #endif - while (!need_resched()) { - void (*idle)(void); - if (__get_cpu_var(cpu_idle_state)) __get_cpu_var(cpu_idle_state) = 0; @@ -284,17 +292,17 @@ cpu_idle (void) if (!idle) idle = default_idle; (*idle)(); - } - - if (mark_idle) - (*mark_idle)(0); - + if (mark_idle) + (*mark_idle)(0); #ifdef CONFIG_SMP - normal_xtp(); + normal_xtp(); #endif + } + preempt_enable_no_resched(); schedule(); + preempt_disable(); check_pgt_cache(); - if (cpu_is_offline(smp_processor_id())) + if (cpu_is_offline(cpu)) play_dead(); } } @@ -804,12 +812,14 @@ cpu_halt (void) void machine_restart (char *restart_cmd) { + (void) notify_die(DIE_MACHINE_RESTART, restart_cmd, NULL, 0, 0, 0); (*efi.reset_system)(EFI_RESET_WARM, 0, 0, NULL); } void machine_halt (void) { + (void) notify_die(DIE_MACHINE_HALT, "", NULL, 0, 0, 0); cpu_halt(); } diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index c9388a9..5add0bc 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -92,6 +92,13 @@ extern void efi_initialize_iomem_resources(struct resource *, extern char _text[], _end[], _etext[]; unsigned long ia64_max_cacheline_size; + +int dma_get_cache_alignment(void) +{ + return ia64_max_cacheline_size; +} +EXPORT_SYMBOL(dma_get_cache_alignment); + unsigned long ia64_iobase; /* virtual address for I/O accesses */ EXPORT_SYMBOL(ia64_iobase); struct io_space io_space[MAX_IO_SPACES]; diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c index 774f34b..58ce07e 100644 --- a/arch/ia64/kernel/signal.c +++ b/arch/ia64/kernel/signal.c @@ -387,15 +387,14 @@ setup_frame (int sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *set, struct sigscratch *scr) { extern char __kernel_sigtramp[]; - unsigned long tramp_addr, new_rbs = 0; + unsigned long tramp_addr, new_rbs = 0, new_sp; struct sigframe __user *frame; long err; - frame = (void __user *) scr->pt.r12; + new_sp = scr->pt.r12; tramp_addr = (unsigned long) __kernel_sigtramp; - if ((ka->sa.sa_flags & SA_ONSTACK) && sas_ss_flags((unsigned long) frame) == 0) { - frame = (void __user *) ((current->sas_ss_sp + current->sas_ss_size) - & ~(STACK_ALIGN - 1)); + if ((ka->sa.sa_flags & SA_ONSTACK) && sas_ss_flags(new_sp) == 0) { + new_sp = current->sas_ss_sp + current->sas_ss_size; /* * We need to check for the register stack being on the signal stack * separately, because it's switched separately (memory stack is switched @@ -404,7 +403,7 @@ setup_frame (int sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *set, if (!rbs_on_sig_stack(scr->pt.ar_bspstore)) new_rbs = (current->sas_ss_sp + sizeof(long) - 1) & ~(sizeof(long) - 1); } - frame = (void __user *) frame - ((sizeof(*frame) + STACK_ALIGN - 1) & ~(STACK_ALIGN - 1)); + frame = (void __user *) ((new_sp - sizeof(*frame)) & -STACK_ALIGN); if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) return force_sigsegv_info(sig, frame); diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index 400a489..8f44e7d 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -399,6 +399,7 @@ start_secondary (void *unused) Dprintk("start_secondary: starting CPU 0x%x\n", hard_smp_processor_id()); efi_map_pal_code(); cpu_init(); + preempt_disable(); smp_callin(); cpu_idle(); diff --git a/arch/ia64/kernel/traps.c b/arch/ia64/kernel/traps.c index f970359..fba5fdd 100644 --- a/arch/ia64/kernel/traps.c +++ b/arch/ia64/kernel/traps.c @@ -30,17 +30,20 @@ fpswa_interface_t *fpswa_interface; EXPORT_SYMBOL(fpswa_interface); struct notifier_block *ia64die_chain; -static DEFINE_SPINLOCK(die_notifier_lock); -int register_die_notifier(struct notifier_block *nb) +int +register_die_notifier(struct notifier_block *nb) { - int err = 0; - unsigned long flags; - spin_lock_irqsave(&die_notifier_lock, flags); - err = notifier_chain_register(&ia64die_chain, nb); - spin_unlock_irqrestore(&die_notifier_lock, flags); - return err; + return notifier_chain_register(&ia64die_chain, nb); } +EXPORT_SYMBOL_GPL(register_die_notifier); + +int +unregister_die_notifier(struct notifier_block *nb) +{ + return notifier_chain_unregister(&ia64die_chain, nb); +} +EXPORT_SYMBOL_GPL(unregister_die_notifier); void __init trap_init (void) @@ -105,6 +108,7 @@ die (const char *str, struct pt_regs *regs, long err) if (++die.lock_owner_depth < 3) { printk("%s[%d]: %s %ld [%d]\n", current->comm, current->pid, str, err, ++die_counter); + (void) notify_die(DIE_OOPS, (char *)str, regs, err, 255, SIGSEGV); show_regs(regs); } else printk(KERN_ERR "Recursive die() failure, output suppressed\n"); @@ -155,9 +159,8 @@ __kprobes ia64_bad_break (unsigned long break_num, struct pt_regs *regs) switch (break_num) { case 0: /* unknown error (used by GCC for __builtin_abort()) */ if (notify_die(DIE_BREAK, "break 0", regs, break_num, TRAP_BRKPT, SIGTRAP) - == NOTIFY_STOP) { + == NOTIFY_STOP) return; - } die_if_kernel("bugcheck!", regs, break_num); sig = SIGILL; code = ILL_ILLOPC; break; @@ -210,15 +213,6 @@ __kprobes ia64_bad_break (unsigned long break_num, struct pt_regs *regs) sig = SIGILL; code = __ILL_BNDMOD; break; - case 0x80200: - case 0x80300: - if (notify_die(DIE_BREAK, "kprobe", regs, break_num, TRAP_BRKPT, SIGTRAP) - == NOTIFY_STOP) { - return; - } - sig = SIGTRAP; code = TRAP_BRKPT; - break; - default: if (break_num < 0x40000 || break_num > 0x100000) die_if_kernel("Bad break", regs, break_num); @@ -226,6 +220,9 @@ __kprobes ia64_bad_break (unsigned long break_num, struct pt_regs *regs) if (break_num < 0x80000) { sig = SIGILL; code = __ILL_BREAK; } else { + if (notify_die(DIE_BREAK, "bad break", regs, break_num, TRAP_BRKPT, SIGTRAP) + == NOTIFY_STOP) + return; sig = SIGTRAP; code = TRAP_BRKPT; } } @@ -578,12 +575,11 @@ ia64_fault (unsigned long vector, unsigned long isr, unsigned long ifa, #endif break; case 35: siginfo.si_code = TRAP_BRANCH; ifa = 0; break; - case 36: - if (notify_die(DIE_SS, "ss", ®s, vector, - vector, SIGTRAP) == NOTIFY_STOP) - return; - siginfo.si_code = TRAP_TRACE; ifa = 0; break; + case 36: siginfo.si_code = TRAP_TRACE; ifa = 0; break; } + if (notify_die(DIE_FAULT, "ia64_fault", ®s, vector, siginfo.si_code, SIGTRAP) + == NOTIFY_STOP) + return; siginfo.si_signo = SIGTRAP; siginfo.si_errno = 0; siginfo.si_addr = (void __user *) ifa; diff --git a/arch/ia64/lib/Makefile b/arch/ia64/lib/Makefile index cb1af59..ac64664 100644 --- a/arch/ia64/lib/Makefile +++ b/arch/ia64/lib/Makefile @@ -9,7 +9,7 @@ lib-y := __divsi3.o __udivsi3.o __modsi3.o __umodsi3.o \ bitop.o checksum.o clear_page.o csum_partial_copy.o \ clear_user.o strncpy_from_user.o strlen_user.o strnlen_user.o \ flush.o ip_fast_csum.o do_csum.o \ - memset.o strlen.o swiotlb.o + memset.o strlen.o lib-$(CONFIG_ITANIUM) += copy_page.o copy_user.o memcpy.o lib-$(CONFIG_MCKINLEY) += copy_page_mck.o memcpy_mck.o diff --git a/arch/ia64/lib/swiotlb.c b/arch/ia64/lib/swiotlb.c deleted file mode 100644 index 96edcc0..0000000 --- a/arch/ia64/lib/swiotlb.c +++ /dev/null @@ -1,759 +0,0 @@ -/* - * Dynamic DMA mapping support. - * - * This implementation is for IA-64 platforms that do not support - * I/O TLBs (aka DMA address translation hardware). - * Copyright (C) 2000 Asit Mallick <Asit.K.Mallick@intel.com> - * Copyright (C) 2000 Goutham Rao <goutham.rao@intel.com> - * Copyright (C) 2000, 2003 Hewlett-Packard Co - * David Mosberger-Tang <davidm@hpl.hp.com> - * - * 03/05/07 davidm Switch from PCI-DMA to generic device DMA API. - * 00/12/13 davidm Rename to swiotlb.c and add mark_clean() to avoid - * unnecessary i-cache flushing. - * 04/07/.. ak Better overflow handling. Assorted fixes. - */ - -#include <linux/cache.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/spinlock.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/ctype.h> - -#include <asm/io.h> -#include <asm/pci.h> -#include <asm/dma.h> - -#include <linux/init.h> -#include <linux/bootmem.h> - -#define OFFSET(val,align) ((unsigned long) \ - ( (val) & ( (align) - 1))) - -#define SG_ENT_VIRT_ADDRESS(sg) (page_address((sg)->page) + (sg)->offset) -#define SG_ENT_PHYS_ADDRESS(SG) virt_to_phys(SG_ENT_VIRT_ADDRESS(SG)) - -/* - * Maximum allowable number of contiguous slabs to map, - * must be a power of 2. What is the appropriate value ? - * The complexity of {map,unmap}_single is linearly dependent on this value. - */ -#define IO_TLB_SEGSIZE 128 - -/* - * log of the size of each IO TLB slab. The number of slabs is command line - * controllable. - */ -#define IO_TLB_SHIFT 11 - -#define SLABS_PER_PAGE (1 << (PAGE_SHIFT - IO_TLB_SHIFT)) - -/* - * Minimum IO TLB size to bother booting with. Systems with mainly - * 64bit capable cards will only lightly use the swiotlb. If we can't - * allocate a contiguous 1MB, we're probably in trouble anyway. - */ -#define IO_TLB_MIN_SLABS ((1<<20) >> IO_TLB_SHIFT) - -int swiotlb_force; - -/* - * Used to do a quick range check in swiotlb_unmap_single and - * swiotlb_sync_single_*, to see if the memory was in fact allocated by this - * API. - */ -static char *io_tlb_start, *io_tlb_end; - -/* - * The number of IO TLB blocks (in groups of 64) betweeen io_tlb_start and - * io_tlb_end. This is command line adjustable via setup_io_tlb_npages. - */ -static unsigned long io_tlb_nslabs; - -/* - * When the IOMMU overflows we return a fallback buffer. This sets the size. - */ -static unsigned long io_tlb_overflow = 32*1024; - -void *io_tlb_overflow_buffer; - -/* - * This is a free list describing the number of free entries available from - * each index - */ -static unsigned int *io_tlb_list; -static unsigned int io_tlb_index; - -/* - * We need to save away the original address corresponding to a mapped entry - * for the sync operations. - */ -static unsigned char **io_tlb_orig_addr; - -/* - * Protect the above data structures in the map and unmap calls - */ -static DEFINE_SPINLOCK(io_tlb_lock); - -static int __init -setup_io_tlb_npages(char *str) -{ - if (isdigit(*str)) { - io_tlb_nslabs = simple_strtoul(str, &str, 0); - /* avoid tail segment of size < IO_TLB_SEGSIZE */ - io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE); - } - if (*str == ',') - ++str; - if (!strcmp(str, "force")) - swiotlb_force = 1; - return 1; -} -__setup("swiotlb=", setup_io_tlb_npages); -/* make io_tlb_overflow tunable too? */ - -/* - * Statically reserve bounce buffer space and initialize bounce buffer data - * structures for the software IO TLB used to implement the PCI DMA API. - */ -void -swiotlb_init_with_default_size (size_t default_size) -{ - unsigned long i; - - if (!io_tlb_nslabs) { - io_tlb_nslabs = (default_size >> IO_TLB_SHIFT); - io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE); - } - - /* - * Get IO TLB memory from the low pages - */ - io_tlb_start = alloc_bootmem_low_pages_limit(io_tlb_nslabs * - (1 << IO_TLB_SHIFT), 0x100000000); - if (!io_tlb_start) - panic("Cannot allocate SWIOTLB buffer"); - io_tlb_end = io_tlb_start + io_tlb_nslabs * (1 << IO_TLB_SHIFT); - - /* - * Allocate and initialize the free list array. This array is used - * to find contiguous free memory regions of size up to IO_TLB_SEGSIZE - * between io_tlb_start and io_tlb_end. - */ - io_tlb_list = alloc_bootmem(io_tlb_nslabs * sizeof(int)); - for (i = 0; i < io_tlb_nslabs; i++) - io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE); - io_tlb_index = 0; - io_tlb_orig_addr = alloc_bootmem(io_tlb_nslabs * sizeof(char *)); - - /* - * Get the overflow emergency buffer - */ - io_tlb_overflow_buffer = alloc_bootmem_low(io_tlb_overflow); - printk(KERN_INFO "Placing software IO TLB between 0x%lx - 0x%lx\n", - virt_to_phys(io_tlb_start), virt_to_phys(io_tlb_end)); -} - -void -swiotlb_init (void) -{ - swiotlb_init_with_default_size(64 * (1<<20)); /* default to 64MB */ -} - -/* - * Systems with larger DMA zones (those that don't support ISA) can - * initialize the swiotlb later using the slab allocator if needed. - * This should be just like above, but with some error catching. - */ -int -swiotlb_late_init_with_default_size (size_t default_size) -{ - unsigned long i, req_nslabs = io_tlb_nslabs; - unsigned int order; - - if (!io_tlb_nslabs) { - io_tlb_nslabs = (default_size >> IO_TLB_SHIFT); - io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE); - } - - /* - * Get IO TLB memory from the low pages - */ - order = get_order(io_tlb_nslabs * (1 << IO_TLB_SHIFT)); - io_tlb_nslabs = SLABS_PER_PAGE << order; - - while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) { - io_tlb_start = (char *)__get_free_pages(GFP_DMA | __GFP_NOWARN, - order); - if (io_tlb_start) - break; - order--; - } - - if (!io_tlb_start) - goto cleanup1; - - if (order != get_order(io_tlb_nslabs * (1 << IO_TLB_SHIFT))) { - printk(KERN_WARNING "Warning: only able to allocate %ld MB " - "for software IO TLB\n", (PAGE_SIZE << order) >> 20); - io_tlb_nslabs = SLABS_PER_PAGE << order; - } - io_tlb_end = io_tlb_start + io_tlb_nslabs * (1 << IO_TLB_SHIFT); - memset(io_tlb_start, 0, io_tlb_nslabs * (1 << IO_TLB_SHIFT)); - - /* - * Allocate and initialize the free list array. This array is used - * to find contiguous free memory regions of size up to IO_TLB_SEGSIZE - * between io_tlb_start and io_tlb_end. - */ - io_tlb_list = (unsigned int *)__get_free_pages(GFP_KERNEL, - get_order(io_tlb_nslabs * sizeof(int))); - if (!io_tlb_list) - goto cleanup2; - - for (i = 0; i < io_tlb_nslabs; i++) - io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE); - io_tlb_index = 0; - - io_tlb_orig_addr = (unsigned char **)__get_free_pages(GFP_KERNEL, - get_order(io_tlb_nslabs * sizeof(char *))); - if (!io_tlb_orig_addr) - goto cleanup3; - - memset(io_tlb_orig_addr, 0, io_tlb_nslabs * sizeof(char *)); - - /* - * Get the overflow emergency buffer - */ - io_tlb_overflow_buffer = (void *)__get_free_pages(GFP_DMA, - get_order(io_tlb_overflow)); - if (!io_tlb_overflow_buffer) - goto cleanup4; - - printk(KERN_INFO "Placing %ldMB software IO TLB between 0x%lx - " - "0x%lx\n", (io_tlb_nslabs * (1 << IO_TLB_SHIFT)) >> 20, - virt_to_phys(io_tlb_start), virt_to_phys(io_tlb_end)); - - return 0; - -cleanup4: - free_pages((unsigned long)io_tlb_orig_addr, get_order(io_tlb_nslabs * - sizeof(char *))); - io_tlb_orig_addr = NULL; -cleanup3: - free_pages((unsigned long)io_tlb_list, get_order(io_tlb_nslabs * - sizeof(int))); - io_tlb_list = NULL; - io_tlb_end = NULL; -cleanup2: - free_pages((unsigned long)io_tlb_start, order); - io_tlb_start = NULL; -cleanup1: - io_tlb_nslabs = req_nslabs; - return -ENOMEM; -} - -static inline int -address_needs_mapping(struct device *hwdev, dma_addr_t addr) -{ - dma_addr_t mask = 0xffffffff; - /* If the device has a mask, use it, otherwise default to 32 bits */ - if (hwdev && hwdev->dma_mask) - mask = *hwdev->dma_mask; - return (addr & ~mask) != 0; -} - -/* - * Allocates bounce buffer and returns its kernel virtual address. - */ -static void * -map_single(struct device *hwdev, char *buffer, size_t size, int dir) -{ - unsigned long flags; - char *dma_addr; - unsigned int nslots, stride, index, wrap; - int i; - - /* - * For mappings greater than a page, we limit the stride (and - * hence alignment) to a page size. - */ - nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT; - if (size > PAGE_SIZE) - stride = (1 << (PAGE_SHIFT - IO_TLB_SHIFT)); - else - stride = 1; - - if (!nslots) - BUG(); - - /* - * Find suitable number of IO TLB entries size that will fit this - * request and allocate a buffer from that IO TLB pool. - */ - spin_lock_irqsave(&io_tlb_lock, flags); - { - wrap = index = ALIGN(io_tlb_index, stride); - - if (index >= io_tlb_nslabs) - wrap = index = 0; - - do { - /* - * If we find a slot that indicates we have 'nslots' - * number of contiguous buffers, we allocate the - * buffers from that slot and mark the entries as '0' - * indicating unavailable. - */ - if (io_tlb_list[index] >= nslots) { - int count = 0; - - for (i = index; i < (int) (index + nslots); i++) - io_tlb_list[i] = 0; - for (i = index - 1; (OFFSET(i, IO_TLB_SEGSIZE) != IO_TLB_SEGSIZE -1) && io_tlb_list[i]; i--) - io_tlb_list[i] = ++count; - dma_addr = io_tlb_start + (index << IO_TLB_SHIFT); - - /* - * Update the indices to avoid searching in - * the next round. - */ - io_tlb_index = ((index + nslots) < io_tlb_nslabs - ? (index + nslots) : 0); - - goto found; - } - index += stride; - if (index >= io_tlb_nslabs) - index = 0; - } while (index != wrap); - - spin_unlock_irqrestore(&io_tlb_lock, flags); - return NULL; - } - found: - spin_unlock_irqrestore(&io_tlb_lock, flags); - - /* - * Save away the mapping from the original address to the DMA address. - * This is needed when we sync the memory. Then we sync the buffer if - * needed. - */ - io_tlb_orig_addr[index] = buffer; - if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) - memcpy(dma_addr, buffer, size); - - return dma_addr; -} - -/* - * dma_addr is the kernel virtual address of the bounce buffer to unmap. - */ -static void -unmap_single(struct device *hwdev, char *dma_addr, size_t size, int dir) -{ - unsigned long flags; - int i, count, nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT; - int index = (dma_addr - io_tlb_start) >> IO_TLB_SHIFT; - char *buffer = io_tlb_orig_addr[index]; - - /* - * First, sync the memory before unmapping the entry - */ - if (buffer && ((dir == DMA_FROM_DEVICE) || (dir == DMA_BIDIRECTIONAL))) - /* - * bounce... copy the data back into the original buffer * and - * delete the bounce buffer. - */ - memcpy(buffer, dma_addr, size); - - /* - * Return the buffer to the free list by setting the corresponding - * entries to indicate the number of contigous entries available. - * While returning the entries to the free list, we merge the entries - * with slots below and above the pool being returned. - */ - spin_lock_irqsave(&io_tlb_lock, flags); - { - count = ((index + nslots) < ALIGN(index + 1, IO_TLB_SEGSIZE) ? - io_tlb_list[index + nslots] : 0); - /* - * Step 1: return the slots to the free list, merging the - * slots with superceeding slots - */ - for (i = index + nslots - 1; i >= index; i--) - io_tlb_list[i] = ++count; - /* - * Step 2: merge the returned slots with the preceding slots, - * if available (non zero) - */ - for (i = index - 1; (OFFSET(i, IO_TLB_SEGSIZE) != IO_TLB_SEGSIZE -1) && io_tlb_list[i]; i--) - io_tlb_list[i] = ++count; - } - spin_unlock_irqrestore(&io_tlb_lock, flags); -} - -static void -sync_single(struct device *hwdev, char *dma_addr, size_t size, int dir) -{ - int index = (dma_addr - io_tlb_start) >> IO_TLB_SHIFT; - char *buffer = io_tlb_orig_addr[index]; - - /* - * bounce... copy the data back into/from the original buffer - * XXX How do you handle DMA_BIDIRECTIONAL here ? - */ - if (dir == DMA_FROM_DEVICE) - memcpy(buffer, dma_addr, size); - else if (dir == DMA_TO_DEVICE) - memcpy(dma_addr, buffer, size); - else - BUG(); -} - -void * -swiotlb_alloc_coherent(struct device *hwdev, size_t size, - dma_addr_t *dma_handle, gfp_t flags) -{ - unsigned long dev_addr; - void *ret; - int order = get_order(size); - - /* - * XXX fix me: the DMA API should pass us an explicit DMA mask - * instead, or use ZONE_DMA32 (ia64 overloads ZONE_DMA to be a ~32 - * bit range instead of a 16MB one). - */ - flags |= GFP_DMA; - - ret = (void *)__get_free_pages(flags, order); - if (ret && address_needs_mapping(hwdev, virt_to_phys(ret))) { - /* - * The allocated memory isn't reachable by the device. - * Fall back on swiotlb_map_single(). - */ - free_pages((unsigned long) ret, order); - ret = NULL; - } - if (!ret) { - /* - * We are either out of memory or the device can't DMA - * to GFP_DMA memory; fall back on - * swiotlb_map_single(), which will grab memory from - * the lowest available address range. - */ - dma_addr_t handle; - handle = swiotlb_map_single(NULL, NULL, size, DMA_FROM_DEVICE); - if (dma_mapping_error(handle)) - return NULL; - - ret = phys_to_virt(handle); - } - - memset(ret, 0, size); - dev_addr = virt_to_phys(ret); - - /* Confirm address can be DMA'd by device */ - if (address_needs_mapping(hwdev, dev_addr)) { - printk("hwdev DMA mask = 0x%016Lx, dev_addr = 0x%016lx\n", - (unsigned long long)*hwdev->dma_mask, dev_addr); - panic("swiotlb_alloc_coherent: allocated memory is out of " - "range for device"); - } - *dma_handle = dev_addr; - return ret; -} - -void -swiotlb_free_coherent(struct device *hwdev, size_t size, void *vaddr, - dma_addr_t dma_handle) -{ - if (!(vaddr >= (void *)io_tlb_start - && vaddr < (void *)io_tlb_end)) - free_pages((unsigned long) vaddr, get_order(size)); - else - /* DMA_TO_DEVICE to avoid memcpy in unmap_single */ - swiotlb_unmap_single (hwdev, dma_handle, size, DMA_TO_DEVICE); -} - -static void -swiotlb_full(struct device *dev, size_t size, int dir, int do_panic) -{ - /* - * Ran out of IOMMU space for this operation. This is very bad. - * Unfortunately the drivers cannot handle this operation properly. - * unless they check for pci_dma_mapping_error (most don't) - * When the mapping is small enough return a static buffer to limit - * the damage, or panic when the transfer is too big. - */ - printk(KERN_ERR "PCI-DMA: Out of SW-IOMMU space for %lu bytes at " - "device %s\n", size, dev ? dev->bus_id : "?"); - - if (size > io_tlb_overflow && do_panic) { - if (dir == PCI_DMA_FROMDEVICE || dir == PCI_DMA_BIDIRECTIONAL) - panic("PCI-DMA: Memory would be corrupted\n"); - if (dir == PCI_DMA_TODEVICE || dir == PCI_DMA_BIDIRECTIONAL) - panic("PCI-DMA: Random memory would be DMAed\n"); - } -} - -/* - * Map a single buffer of the indicated size for DMA in streaming mode. The - * PCI address to use is returned. - * - * Once the device is given the dma address, the device owns this memory until - * either swiotlb_unmap_single or swiotlb_dma_sync_single is performed. - */ -dma_addr_t -swiotlb_map_single(struct device *hwdev, void *ptr, size_t size, int dir) -{ - unsigned long dev_addr = virt_to_phys(ptr); - void *map; - - if (dir == DMA_NONE) - BUG(); - /* - * If the pointer passed in happens to be in the device's DMA window, - * we can safely return the device addr and not worry about bounce - * buffering it. - */ - if (!address_needs_mapping(hwdev, dev_addr) && !swiotlb_force) - return dev_addr; - - /* - * Oh well, have to allocate and map a bounce buffer. - */ - map = map_single(hwdev, ptr, size, dir); - if (!map) { - swiotlb_full(hwdev, size, dir, 1); - map = io_tlb_overflow_buffer; - } - - dev_addr = virt_to_phys(map); - - /* - * Ensure that the address returned is DMA'ble - */ - if (address_needs_mapping(hwdev, dev_addr)) - panic("map_single: bounce buffer is not DMA'ble"); - - return dev_addr; -} - -/* - * Since DMA is i-cache coherent, any (complete) pages that were written via - * DMA can be marked as "clean" so that lazy_mmu_prot_update() doesn't have to - * flush them when they get mapped into an executable vm-area. - */ -static void -mark_clean(void *addr, size_t size) -{ - unsigned long pg_addr, end; - - pg_addr = PAGE_ALIGN((unsigned long) addr); - end = (unsigned long) addr + size; - while (pg_addr + PAGE_SIZE <= end) { - struct page *page = virt_to_page(pg_addr); - set_bit(PG_arch_1, &page->flags); - pg_addr += PAGE_SIZE; - } -} - -/* - * Unmap a single streaming mode DMA translation. The dma_addr and size must - * match what was provided for in a previous swiotlb_map_single call. All - * other usages are undefined. - * - * After this call, reads by the cpu to the buffer are guaranteed to see - * whatever the device wrote there. - */ -void -swiotlb_unmap_single(struct device *hwdev, dma_addr_t dev_addr, size_t size, - int dir) -{ - char *dma_addr = phys_to_virt(dev_addr); - - if (dir == DMA_NONE) - BUG(); - if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end) - unmap_single(hwdev, dma_addr, size, dir); - else if (dir == DMA_FROM_DEVICE) - mark_clean(dma_addr, size); -} - -/* - * Make physical memory consistent for a single streaming mode DMA translation - * after a transfer. - * - * If you perform a swiotlb_map_single() but wish to interrogate the buffer - * using the cpu, yet do not wish to teardown the PCI dma mapping, you must - * call this function before doing so. At the next point you give the PCI dma - * address back to the card, you must first perform a - * swiotlb_dma_sync_for_device, and then the device again owns the buffer - */ -void -swiotlb_sync_single_for_cpu(struct device *hwdev, dma_addr_t dev_addr, - size_t size, int dir) -{ - char *dma_addr = phys_to_virt(dev_addr); - - if (dir == DMA_NONE) - BUG(); - if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end) - sync_single(hwdev, dma_addr, size, dir); - else if (dir == DMA_FROM_DEVICE) - mark_clean(dma_addr, size); -} - -void -swiotlb_sync_single_for_device(struct device *hwdev, dma_addr_t dev_addr, - size_t size, int dir) -{ - char *dma_addr = phys_to_virt(dev_addr); - - if (dir == DMA_NONE) - BUG(); - if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end) - sync_single(hwdev, dma_addr, size, dir); - else if (dir == DMA_FROM_DEVICE) - mark_clean(dma_addr, size); -} - -/* - * Map a set of buffers described by scatterlist in streaming mode for DMA. - * This is the scatter-gather version of the above swiotlb_map_single - * interface. Here the scatter gather list elements are each tagged with the - * appropriate dma address and length. They are obtained via - * sg_dma_{address,length}(SG). - * - * NOTE: An implementation may be able to use a smaller number of - * DMA address/length pairs than there are SG table elements. - * (for example via virtual mapping capabilities) - * The routine returns the number of addr/length pairs actually - * used, at most nents. - * - * Device ownership issues as mentioned above for swiotlb_map_single are the - * same here. - */ -int -swiotlb_map_sg(struct device *hwdev, struct scatterlist *sg, int nelems, - int dir) -{ - void *addr; - unsigned long dev_addr; - int i; - - if (dir == DMA_NONE) - BUG(); - - for (i = 0; i < nelems; i++, sg++) { - addr = SG_ENT_VIRT_ADDRESS(sg); - dev_addr = virt_to_phys(addr); - if (swiotlb_force || address_needs_mapping(hwdev, dev_addr)) { - sg->dma_address = (dma_addr_t) virt_to_phys(map_single(hwdev, addr, sg->length, dir)); - if (!sg->dma_address) { - /* Don't panic here, we expect map_sg users - to do proper error handling. */ - swiotlb_full(hwdev, sg->length, dir, 0); - swiotlb_unmap_sg(hwdev, sg - i, i, dir); - sg[0].dma_length = 0; - return 0; - } - } else - sg->dma_address = dev_addr; - sg->dma_length = sg->length; - } - return nelems; -} - -/* - * Unmap a set of streaming mode DMA translations. Again, cpu read rules - * concerning calls here are the same as for swiotlb_unmap_single() above. - */ -void -swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sg, int nelems, - int dir) -{ - int i; - - if (dir == DMA_NONE) - BUG(); - - for (i = 0; i < nelems; i++, sg++) - if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg)) - unmap_single(hwdev, (void *) phys_to_virt(sg->dma_address), sg->dma_length, dir); - else if (dir == DMA_FROM_DEVICE) - mark_clean(SG_ENT_VIRT_ADDRESS(sg), sg->dma_length); -} - -/* - * Make physical memory consistent for a set of streaming mode DMA translations - * after a transfer. - * - * The same as swiotlb_sync_single_* but for a scatter-gather list, same rules - * and usage. - */ -void -swiotlb_sync_sg_for_cpu(struct device *hwdev, struct scatterlist *sg, - int nelems, int dir) -{ - int i; - - if (dir == DMA_NONE) - BUG(); - - for (i = 0; i < nelems; i++, sg++) - if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg)) - sync_single(hwdev, (void *) sg->dma_address, - sg->dma_length, dir); -} - -void -swiotlb_sync_sg_for_device(struct device *hwdev, struct scatterlist *sg, - int nelems, int dir) -{ - int i; - - if (dir == DMA_NONE) - BUG(); - - for (i = 0; i < nelems; i++, sg++) - if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg)) - sync_single(hwdev, (void *) sg->dma_address, - sg->dma_length, dir); -} - -int -swiotlb_dma_mapping_error(dma_addr_t dma_addr) -{ - return (dma_addr == virt_to_phys(io_tlb_overflow_buffer)); -} - -/* - * Return whether the given PCI device DMA address mask can be supported - * properly. For example, if your device can only drive the low 24-bits - * during PCI bus mastering, then you would pass 0x00ffffff as the mask to - * this function. - */ -int -swiotlb_dma_supported (struct device *hwdev, u64 mask) -{ - return (virt_to_phys (io_tlb_end) - 1) <= mask; -} - -EXPORT_SYMBOL(swiotlb_init); -EXPORT_SYMBOL(swiotlb_map_single); -EXPORT_SYMBOL(swiotlb_unmap_single); -EXPORT_SYMBOL(swiotlb_map_sg); -EXPORT_SYMBOL(swiotlb_unmap_sg); -EXPORT_SYMBOL(swiotlb_sync_single_for_cpu); -EXPORT_SYMBOL(swiotlb_sync_single_for_device); -EXPORT_SYMBOL(swiotlb_sync_sg_for_cpu); -EXPORT_SYMBOL(swiotlb_sync_sg_for_device); -EXPORT_SYMBOL(swiotlb_dma_mapping_error); -EXPORT_SYMBOL(swiotlb_alloc_coherent); -EXPORT_SYMBOL(swiotlb_free_coherent); -EXPORT_SYMBOL(swiotlb_dma_supported); diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index a88cdb7..0f776b0 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -350,14 +350,12 @@ static void __init initialize_pernode_data(void) * for best. * @nid: node id * @pernodesize: size of this node's pernode data - * @align: alignment to use for this node's pernode data */ -static void __init *memory_less_node_alloc(int nid, unsigned long pernodesize, - unsigned long align) +static void __init *memory_less_node_alloc(int nid, unsigned long pernodesize) { void *ptr = NULL; u8 best = 0xff; - int bestnode = -1, node; + int bestnode = -1, node, anynode = 0; for_each_online_node(node) { if (node_isset(node, memory_less_mask)) @@ -366,13 +364,15 @@ static void __init *memory_less_node_alloc(int nid, unsigned long pernodesize, best = node_distance(nid, node); bestnode = node; } + anynode = node; } - ptr = __alloc_bootmem_node(mem_data[bestnode].pgdat, - pernodesize, align, __pa(MAX_DMA_ADDRESS)); + if (bestnode == -1) + bestnode = anynode; + + ptr = __alloc_bootmem_node(mem_data[bestnode].pgdat, pernodesize, + PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS)); - if (!ptr) - panic("NO memory for memory less node\n"); return ptr; } @@ -413,8 +413,7 @@ static void __init memory_less_nodes(void) for_each_node_mask(node, memory_less_mask) { pernodesize = compute_pernodesize(node); - pernode = memory_less_node_alloc(node, pernodesize, - (node) ? (node * PERCPU_PAGE_SIZE) : (1024*1024)); + pernode = memory_less_node_alloc(node, pernodesize); fill_pernode(node, __pa(pernode), pernodesize); } diff --git a/arch/ia64/oprofile/Kconfig b/arch/ia64/oprofile/Kconfig index 56e6f61..97271ab 100644 --- a/arch/ia64/oprofile/Kconfig +++ b/arch/ia64/oprofile/Kconfig @@ -1,7 +1,3 @@ - -menu "Profiling support" - depends on EXPERIMENTAL - config PROFILING bool "Profiling support (EXPERIMENTAL)" help @@ -22,5 +18,3 @@ config OPROFILE If unsure, say N. -endmenu - diff --git a/arch/ia64/sn/pci/pcibr/pcibr_provider.c b/arch/ia64/sn/pci/pcibr/pcibr_provider.c index 7b03b80..1f500c8 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_provider.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_provider.c @@ -212,13 +212,13 @@ void pcibr_target_interrupt(struct sn_irq_info *sn_irq_info) pdi_pcibus_info; /* Disable the device's IRQ */ - pcireg_intr_enable_bit_clr(pcibus_info, bit); + pcireg_intr_enable_bit_clr(pcibus_info, (1 << bit)); /* Change the device's IRQ */ pcireg_intr_addr_addr_set(pcibus_info, bit, xtalk_addr); /* Re-enable the device's IRQ */ - pcireg_intr_enable_bit_set(pcibus_info, bit); + pcireg_intr_enable_bit_set(pcibus_info, (1 << bit)); pcibr_force_interrupt(sn_irq_info); } diff --git a/arch/ia64/sn/pci/pcibr/pcibr_reg.c b/arch/ia64/sn/pci/pcibr/pcibr_reg.c index 4f718c3..5d53409 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_reg.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_reg.c @@ -131,7 +131,7 @@ void pcireg_intr_enable_bit_clr(struct pcibus_info *pcibus_info, uint64_t bits) __sn_clrq_relaxed(&ptr->tio.cp_int_enable, bits); break; case PCIBR_BRIDGETYPE_PIC: - __sn_clrq_relaxed(&ptr->pic.p_int_enable, ~bits); + __sn_clrq_relaxed(&ptr->pic.p_int_enable, bits); break; default: panic diff --git a/arch/m32r/kernel/process.c b/arch/m32r/kernel/process.c index ea13a8f..cc4b571 100644 --- a/arch/m32r/kernel/process.c +++ b/arch/m32r/kernel/process.c @@ -104,7 +104,9 @@ void cpu_idle (void) idle(); } + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } diff --git a/arch/m32r/kernel/smpboot.c b/arch/m32r/kernel/smpboot.c index 640d592..b90c541 100644 --- a/arch/m32r/kernel/smpboot.c +++ b/arch/m32r/kernel/smpboot.c @@ -426,6 +426,7 @@ void __init smp_cpus_done(unsigned int max_cpus) int __init start_secondary(void *unused) { cpu_init(); + preempt_disable(); smp_callin(); while (!cpu_isset(smp_processor_id(), smp_commenced_mask)) cpu_relax(); diff --git a/arch/m68k/atari/time.c b/arch/m68k/atari/time.c index 6df7fb6..e79bbc9 100644 --- a/arch/m68k/atari/time.c +++ b/arch/m68k/atari/time.c @@ -212,10 +212,8 @@ int atari_tt_hwclk( int op, struct rtc_time *t ) * additionally the RTC_SET bit is set to prevent an update cycle. */ - while( RTC_READ(RTC_FREQ_SELECT) & RTC_UIP ) { - current->state = TASK_INTERRUPTIBLE; - schedule_timeout(HWCLK_POLL_INTERVAL); - } + while( RTC_READ(RTC_FREQ_SELECT) & RTC_UIP ) + schedule_timeout_interruptible(HWCLK_POLL_INTERVAL); local_irq_save(flags); RTC_WRITE( RTC_CONTROL, ctrl | RTC_SET ); diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c index 11b1b90..13d10932 100644 --- a/arch/m68k/kernel/process.c +++ b/arch/m68k/kernel/process.c @@ -102,7 +102,9 @@ void cpu_idle(void) while (1) { while (!need_resched()) idle(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } diff --git a/arch/m68k/kernel/ptrace.c b/arch/m68k/kernel/ptrace.c index f7f1d2e..7e54422 100644 --- a/arch/m68k/kernel/ptrace.c +++ b/arch/m68k/kernel/ptrace.c @@ -121,48 +121,11 @@ void ptrace_disable(struct task_struct *child) child->thread.work.syscall_trace = 0; } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; unsigned long tmp; int i, ret = 0; - lock_kernel(); - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) { - ret = -EPERM; - goto out; - } - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - goto out; - } - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (unlikely(!child)) { - ret = -ESRCH; - goto out; - } - - /* you may not mess with init */ - if (unlikely(pid == 1)) { - ret = -EPERM; - goto out_tsk; - } - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -317,14 +280,10 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + return ret; out_eio: - ret = -EIO; - goto out_tsk; + return -EIO; } asmlinkage void syscall_trace(void) diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index 8520df9..b964981 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -71,6 +71,11 @@ config M5206e help Motorola ColdFire 5206e processor support. +config M520x + bool "MCF520x" + help + Freescale Coldfire 5207/5208 processor support. + config M523x bool "MCF523x" help @@ -120,7 +125,7 @@ config M527x config COLDFIRE bool - depends on (M5206 || M5206e || M523x || M5249 || M527x || M5272 || M528x || M5307 || M5407) + depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M5407) default y choice @@ -322,6 +327,12 @@ config ELITE help Support for the Motorola M5206eLITE board. +config M5208EVB + bool "Freescale M5208EVB board support" + depends on M520x + help + Support for the Freescale Coldfire M5208EVB. + config M5235EVB bool "Freescale M5235EVB support" depends on M523x @@ -465,10 +476,10 @@ config ARNEWSH default y depends on (ARN5206 || ARN5307) -config MOTOROLA +config FREESCALE bool default y - depends on (M5206eC3 || M5235EVB || M5249C3 || M5271EVB || M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5407C3) + depends on (M5206eC3 || M5208EVB || M5235EVB || M5249C3 || M5271EVB || M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5407C3) config HW_FEITH bool diff --git a/arch/m68knommu/Makefile b/arch/m68knommu/Makefile index b8fdf19..b6b5c14 100644 --- a/arch/m68knommu/Makefile +++ b/arch/m68knommu/Makefile @@ -14,6 +14,7 @@ platform-$(CONFIG_M68VZ328) := 68VZ328 platform-$(CONFIG_M68360) := 68360 platform-$(CONFIG_M5206) := 5206 platform-$(CONFIG_M5206e) := 5206e +platform-$(CONFIG_M520x) := 520x platform-$(CONFIG_M523x) := 523x platform-$(CONFIG_M5249) := 5249 platform-$(CONFIG_M527x) := 527x @@ -29,7 +30,7 @@ board-$(CONFIG_UCDIMM) := ucdimm board-$(CONFIG_UCQUICC) := uCquicc board-$(CONFIG_DRAGEN2) := de2 board-$(CONFIG_ARNEWSH) := ARNEWSH -board-$(CONFIG_MOTOROLA) := MOTOROLA +board-$(CONFIG_FREESCALE) := FREESCALE board-$(CONFIG_M5235EVB) := M5235EVB board-$(CONFIG_M5271EVB) := M5271EVB board-$(CONFIG_M5275EVB) := M5275EVB @@ -41,6 +42,7 @@ board-$(CONFIG_SECUREEDGEMP3) := MP3 board-$(CONFIG_CLEOPATRA) := CLEOPATRA board-$(CONFIG_senTec) := senTec board-$(CONFIG_SNEHA) := SNEHA +board-$(CONFIG_M5208EVB) := M5208EVB board-$(CONFIG_MOD5272) := MOD5272 BOARD := $(board-y) @@ -56,6 +58,7 @@ MODEL := $(model-y) # cpuclass-$(CONFIG_M5206) := 5307 cpuclass-$(CONFIG_M5206e) := 5307 +cpuclass-$(CONFIG_M520x) := 5307 cpuclass-$(CONFIG_M523x) := 5307 cpuclass-$(CONFIG_M5249) := 5307 cpuclass-$(CONFIG_M527x) := 5307 @@ -80,6 +83,7 @@ export PLATFORM BOARD MODEL CPUCLASS # cflags-$(CONFIG_M5206) := -m5200 -Wa,-S -Wa,-m5200 cflags-$(CONFIG_M5206e) := -m5200 -Wa,-S -Wa,-m5200 +cflags-$(CONFIG_M520x) := -m5307 -Wa,-S -Wa,-m5307 cflags-$(CONFIG_M523x) := -m5307 -Wa,-S -Wa,-m5307 cflags-$(CONFIG_M5249) := -m5200 -Wa,-S -Wa,-m5200 cflags-$(CONFIG_M527x) := -m5307 -Wa,-S -Wa,-m5307 @@ -95,7 +99,6 @@ cflags-$(CONFIG_M68360) := -m68332 AFLAGS += $(cflags-y) CFLAGS += $(cflags-y) -CFLAGS += -fno-builtin CFLAGS += -O1 -g CFLAGS += -D__linux__ CFLAGS += -DUTS_SYSNAME=\"uClinux\" diff --git a/arch/m68knommu/defconfig b/arch/m68knommu/defconfig index 87f2d65..2d59ba1 100644 --- a/arch/m68knommu/defconfig +++ b/arch/m68knommu/defconfig @@ -99,7 +99,7 @@ CONFIG_M5272C3=y # CONFIG_NETtel is not set # CONFIG_CPU16B is not set # CONFIG_MOD5272 is not set -CONFIG_MOTOROLA=y +CONFIG_FREESCALE=y # CONFIG_LARGE_ALLOCS is not set CONFIG_4KSTACKS=y CONFIG_RAMAUTO=y @@ -554,7 +554,6 @@ CONFIG_EXT2_FS=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y -CONFIG_MAGIC_ROM_PTR=y # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set # CONFIG_DNOTIFY is not set diff --git a/arch/m68knommu/kernel/asm-offsets.c b/arch/m68knommu/kernel/asm-offsets.c index cd3ffe1..b988c7b 100644 --- a/arch/m68knommu/kernel/asm-offsets.c +++ b/arch/m68knommu/kernel/asm-offsets.c @@ -15,6 +15,7 @@ #include <linux/hardirq.h> #include <asm/bootinfo.h> #include <asm/irq.h> +#include <asm/irqnode.h> #include <asm/thread_info.h> #define DEFINE(sym, val) \ diff --git a/arch/m68knommu/kernel/ptrace.c b/arch/m68knommu/kernel/ptrace.c index 621d7b9..262ab8c 100644 --- a/arch/m68knommu/kernel/ptrace.c +++ b/arch/m68knommu/kernel/ptrace.c @@ -101,43 +101,10 @@ void ptrace_disable(struct task_struct *child) put_reg(child, PT_SR, tmp); } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(truct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret; - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -357,10 +324,6 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = -EIO; break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); return ret; } diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c index a220345..abb80fa 100644 --- a/arch/m68knommu/kernel/setup.c +++ b/arch/m68knommu/kernel/setup.c @@ -107,6 +107,9 @@ void (*mach_power_off)( void ) = NULL; #if defined(CONFIG_M5206e) #define CPU "COLDFIRE(m5206e)" #endif +#if defined(CONFIG_M520x) + #define CPU "COLDFIRE(m520x)" +#endif #if defined(CONFIG_M523x) #define CPU "COLDFIRE(m523x)" #endif @@ -132,7 +135,7 @@ void (*mach_power_off)( void ) = NULL; #define CPU "COLDFIRE(m5407)" #endif #ifndef CPU - #define CPU "UNKOWN" + #define CPU "UNKNOWN" #endif /* (es) */ diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S index 47f0678..0eab92c 100644 --- a/arch/m68knommu/kernel/vmlinux.lds.S +++ b/arch/m68knommu/kernel/vmlinux.lds.S @@ -125,6 +125,14 @@ #endif /* + * The Freescale 5208EVB board has 32MB of RAM. + */ +#if defined(CONFIG_M5208EVB) +#define RAM_START 0x40020000 +#define RAM_LENGTH 0x01e00000 +#endif + +/* * The senTec COBRA5272 board has nearly the same memory layout as * the M5272C3. We assume 16MiB ram. */ @@ -275,6 +283,7 @@ SECTIONS { *(__ksymtab_strings) /* Built-in module parameters */ + . = ALIGN(4) ; __start___param = .; *(__param) __stop___param = .; diff --git a/arch/m68knommu/platform/520x/Makefile b/arch/m68knommu/platform/520x/Makefile new file mode 100644 index 0000000..e861b05 --- /dev/null +++ b/arch/m68knommu/platform/520x/Makefile @@ -0,0 +1,19 @@ +# +# Makefile for the M5208 specific file. +# + +# +# If you want to play with the HW breakpoints then you will +# need to add define this, which will give you a stack backtrace +# on the console port whenever a DBG interrupt occurs. You have to +# set up you HW breakpoints to trigger a DBG interrupt: +# +# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT +# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# + +ifdef CONFIG_FULLDEBUG +AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1 +endif + +obj-y := config.o diff --git a/arch/m68knommu/platform/520x/config.c b/arch/m68knommu/platform/520x/config.c new file mode 100644 index 0000000..71dea2e --- /dev/null +++ b/arch/m68knommu/platform/520x/config.c @@ -0,0 +1,65 @@ +/***************************************************************************/ + +/* + * linux/arch/m68knommu/platform/520x/config.c + * + * Copyright (C) 2005, Freescale (www.freescale.com) + * Copyright (C) 2005, Intec Automation (mike@steroidmicros.com) + * Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com) + * Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com) + */ + +/***************************************************************************/ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <asm/machdep.h> +#include <asm/dma.h> + +/***************************************************************************/ + +/* + * DMA channel base address table. + */ +unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS]; +unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS]; + +/***************************************************************************/ + +void coldfire_pit_tick(void); +void coldfire_pit_init(irqreturn_t (*handler)(int, void *, struct pt_regs *)); +unsigned long coldfire_pit_offset(void); +void coldfire_trap_init(void); +void coldfire_reset(void); + +/***************************************************************************/ + +/* + * Program the vector to be an auto-vectored. + */ + +void mcf_autovector(unsigned int vec) +{ + /* Everything is auto-vectored on the 520x devices */ +} + +/***************************************************************************/ + +void config_BSP(char *commandp, int size) +{ +#ifdef CONFIG_BOOTPARAM + strncpy(commandp, CONFIG_BOOTPARAM_STRING, size); + commandp[size-1] = 0; +#else + memset(commandp, 0, size); +#endif + + mach_sched_init = coldfire_pit_init; + mach_tick = coldfire_pit_tick; + mach_gettimeoffset = coldfire_pit_offset; + mach_trap_init = coldfire_trap_init; + mach_reset = coldfire_reset; +} + +/***************************************************************************/ diff --git a/arch/m68knommu/platform/5307/Makefile b/arch/m68knommu/platform/5307/Makefile index 6fe5a2b..8d1619d 100644 --- a/arch/m68knommu/platform/5307/Makefile +++ b/arch/m68knommu/platform/5307/Makefile @@ -19,6 +19,7 @@ endif obj-$(CONFIG_COLDFIRE) += entry.o vectors.o ints.o obj-$(CONFIG_M5206) += timers.o obj-$(CONFIG_M5206e) += timers.o +obj-$(CONFIG_M520x) += pit.o obj-$(CONFIG_M523x) += pit.o obj-$(CONFIG_M5249) += timers.o obj-$(CONFIG_M527x) += pit.o diff --git a/arch/m68knommu/platform/5307/head.S b/arch/m68knommu/platform/5307/head.S index 7f4ba83..c30c462 100644 --- a/arch/m68knommu/platform/5307/head.S +++ b/arch/m68knommu/platform/5307/head.S @@ -113,6 +113,9 @@ #define MEM_BASE 0x02000000 #define VBR_BASE 0x20000000 /* vectors in SRAM */ #endif +#if defined(CONFIG_M5208EVB) +#define MEM_BASE 0x40000000 +#endif #ifndef MEM_BASE #define MEM_BASE 0x00000000 /* memory base at address 0 */ diff --git a/arch/m68knommu/platform/5307/ints.c b/arch/m68knommu/platform/5307/ints.c index 0117754..a134fb2 100644 --- a/arch/m68knommu/platform/5307/ints.c +++ b/arch/m68knommu/platform/5307/ints.c @@ -26,6 +26,7 @@ #include <asm/system.h> #include <asm/irq.h> +#include <asm/irqnode.h> #include <asm/traps.h> #include <asm/page.h> #include <asm/machdep.h> diff --git a/arch/m68knommu/platform/5307/pit.c b/arch/m68knommu/platform/5307/pit.c index a9b2c2e..323f267 100644 --- a/arch/m68knommu/platform/5307/pit.c +++ b/arch/m68knommu/platform/5307/pit.c @@ -3,7 +3,7 @@ /* * pit.c -- Motorola ColdFire PIT timer. Currently this type of * hardware timer only exists in the Motorola ColdFire - * 5270/5271 and 5282 CPUs. + * 5270/5271, 5282 and other CPUs. * * Copyright (C) 1999-2004, Greg Ungerer (gerg@snapgear.com) * Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com) @@ -47,10 +47,10 @@ void coldfire_pit_init(irqreturn_t (*handler)(int, void *, struct pt_regs *)) icrp = (volatile unsigned char *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + MCFINT_PIT1); - *icrp = 0x2b; /* PIT1 with level 5, priority 3 */ + *icrp = ICR_INTRCONF; - imrp = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH); - *imrp &= ~(1 << (MCFINT_PIT1 - 32)); + imrp = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFPIT_IMR); + *imrp &= ~MCFPIT_IMR_IBIT; /* Set up PIT timer 1 as poll clock */ tp = (volatile struct mcfpit *) (MCF_IPSBAR + MCFPIT_BASE1); @@ -70,7 +70,7 @@ unsigned long coldfire_pit_offset(void) unsigned long pmr, pcntr, offset; tp = (volatile struct mcfpit *) (MCF_IPSBAR + MCFPIT_BASE1); - ipr = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IPRH); + ipr = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFPIT_IMR); pmr = *(&tp->pmr); pcntr = *(&tp->pcntr); @@ -80,7 +80,7 @@ unsigned long coldfire_pit_offset(void) * timer interupt is pending, then add on a ticks worth of time. */ offset = ((pmr - pcntr) * (1000000 / HZ)) / pmr; - if ((offset < (1000000 / HZ / 2)) && (*ipr & (1 << (MCFINT_PIT1 - 32)))) + if ((offset < (1000000 / HZ / 2)) && (*ipr & MCFPIT_IMR_IBIT)) offset += 1000000 / HZ; return offset; } diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 0097a0d..e380a83 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -958,7 +958,7 @@ config SOC_PNX8550 bool select DMA_NONCOHERENT select HW_HAS_PCI - select SYS_HAS_CPU_R4X00 + select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL config SWAP_IO_SPACE diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c index 1ef15d5..4f21f42 100644 --- a/arch/mips/au1000/common/setup.c +++ b/arch/mips/au1000/common/setup.c @@ -111,17 +111,6 @@ void __init plat_setup(void) } #endif -#ifdef CONFIG_FB_E1356 - if ((argptr = strstr(argptr, "video=")) == NULL) { - argptr = prom_getcmdline(); -#ifdef CONFIG_MIPS_PB1000 - strcat(argptr, " video=e1356fb:system:pb1000,mmunalign:1"); -#else - strcat(argptr, " video=e1356fb:system:pb1500"); -#endif - } -#endif - #ifdef CONFIG_FB_XPERT98 if ((argptr = strstr(argptr, "video=")) == NULL) { argptr = prom_getcmdline(); diff --git a/arch/mips/boot/.gitignore b/arch/mips/boot/.gitignore new file mode 100644 index 0000000..ba63401 --- /dev/null +++ b/arch/mips/boot/.gitignore @@ -0,0 +1,4 @@ +mkboot +elf2ecoff +zImage +zImage.tmp diff --git a/arch/mips/configs/ddb5476_defconfig b/arch/mips/configs/ddb5476_defconfig index b260e51..326f3aa 100644 --- a/arch/mips/configs/ddb5476_defconfig +++ b/arch/mips/configs/ddb5476_defconfig @@ -658,7 +658,6 @@ CONFIG_FB=y # CONFIG_FB_SMIVGX is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_E1356 is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index 9a728c2..6390a75 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -628,7 +628,6 @@ CONFIG_FB=y # CONFIG_FB_SMIVGX is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_E1356 is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set diff --git a/arch/mips/configs/ocelot_3_defconfig b/arch/mips/configs/ocelot_3_defconfig index ffb23fc..f18d05c 100644 --- a/arch/mips/configs/ocelot_3_defconfig +++ b/arch/mips/configs/ocelot_3_defconfig @@ -758,7 +758,6 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_SMIVGX is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_E1356 is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index 95f84d7..555837e 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -129,7 +129,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # -# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set # CONFIG_CPU_MIPS64_R2 is not set @@ -137,7 +137,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_TX39XX is not set # CONFIG_CPU_VR41XX is not set # CONFIG_CPU_R4300 is not set -CONFIG_CPU_R4X00=y +# CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set @@ -148,10 +148,11 @@ CONFIG_CPU_R4X00=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_R4X00=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR1=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type @@ -162,11 +163,11 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set # CONFIG_CPU_ADVANCED is not set CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_LLDSCD=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y diff --git a/arch/mips/configs/pnx8550-v2pci_defconfig b/arch/mips/configs/pnx8550-v2pci_defconfig index deb24c2..37bd8d5 100644 --- a/arch/mips/configs/pnx8550-v2pci_defconfig +++ b/arch/mips/configs/pnx8550-v2pci_defconfig @@ -128,7 +128,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # -# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set # CONFIG_CPU_MIPS64_R2 is not set @@ -136,7 +136,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # CONFIG_CPU_TX39XX is not set # CONFIG_CPU_VR41XX is not set # CONFIG_CPU_R4300 is not set -CONFIG_CPU_R4X00=y +# CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set @@ -147,10 +147,11 @@ CONFIG_CPU_R4X00=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_R4X00=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR1=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type @@ -161,6 +162,7 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT is not set # CONFIG_64BIT_PHYS_ADDR is not set CONFIG_CPU_ADVANCED=y @@ -895,7 +897,6 @@ CONFIG_FB=y # CONFIG_FB_SMIVGX is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_E1356 is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig index 2bc61ca..897420d 100644 --- a/arch/mips/configs/rbhma4500_defconfig +++ b/arch/mips/configs/rbhma4500_defconfig @@ -876,7 +876,6 @@ CONFIG_FB_ATY_CT=y # CONFIG_FB_SMIVGX is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_E1356 is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set diff --git a/arch/mips/ddb5xxx/common/rtc_ds1386.c b/arch/mips/ddb5xxx/common/rtc_ds1386.c index f5b1150..995896a 100644 --- a/arch/mips/ddb5xxx/common/rtc_ds1386.c +++ b/arch/mips/ddb5xxx/common/rtc_ds1386.c @@ -41,7 +41,9 @@ rtc_ds1386_get_time(void) u8 byte; u8 temp; unsigned int year, month, day, hour, minute, second; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); /* let us freeze external registers */ byte = READ_RTC(0xB); byte &= 0x3f; @@ -60,6 +62,7 @@ rtc_ds1386_get_time(void) /* enable time transfer */ byte |= 0x80; WRITE_RTC(0xB, byte); + spin_unlock_irqrestore(&rtc_lock, flags); /* calc hour */ if (temp & 0x40) { @@ -81,7 +84,9 @@ rtc_ds1386_set_time(unsigned long t) u8 byte; u8 temp; u8 year, month, day, hour, minute, second; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); /* let us freeze external registers */ byte = READ_RTC(0xB); byte &= 0x3f; @@ -133,6 +138,7 @@ rtc_ds1386_set_time(unsigned long t) if (second != READ_RTC(0x1)) { WRITE_RTC(0x1, second); } + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c index dc7091c..1748223 100644 --- a/arch/mips/dec/time.c +++ b/arch/mips/dec/time.c @@ -37,10 +37,25 @@ #include <asm/dec/machtype.h> +/* + * Returns true if a clock update is in progress + */ +static inline unsigned char dec_rtc_is_updating(void) +{ + unsigned char uip; + unsigned long flags; + + spin_lock_irqsave(&rtc_lock, flags); + uip = (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP); + spin_unlock_irqrestore(&rtc_lock, flags); + return uip; +} + static unsigned long dec_rtc_get_time(void) { unsigned int year, mon, day, hour, min, sec, real_year; int i; + unsigned long flags; /* The Linux interpretation of the DS1287 clock register contents: * When the Update-In-Progress (UIP) flag goes from 1 to 0, the @@ -49,11 +64,12 @@ static unsigned long dec_rtc_get_time(void) */ /* read RTC exactly on falling edge of update flag */ for (i = 0; i < 1000000; i++) /* may take up to 1 second... */ - if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP) + if (dec_rtc_is_updating()) break; for (i = 0; i < 1000000; i++) /* must try at least 2.228 ms */ - if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)) + if (!dec_rtc_is_updating()) break; + spin_lock_irqsave(&rtc_lock, flags); /* Isn't this overkill? UIP above should guarantee consistency */ do { sec = CMOS_READ(RTC_SECONDS); @@ -77,6 +93,7 @@ static unsigned long dec_rtc_get_time(void) * of unused BBU RAM locations. */ real_year = CMOS_READ(RTC_DEC_YEAR); + spin_unlock_irqrestore(&rtc_lock, flags); year += real_year - 72 + 2000; return mktime(year, mon, day, hour, min, sec); @@ -95,6 +112,8 @@ static int dec_rtc_set_mmss(unsigned long nowtime) int real_seconds, real_minutes, cmos_minutes; unsigned char save_control, save_freq_select; + /* irq are locally disabled here */ + spin_lock(&rtc_lock); /* tell the clock it's being set */ save_control = CMOS_READ(RTC_CONTROL); CMOS_WRITE((save_control | RTC_SET), RTC_CONTROL); @@ -141,6 +160,7 @@ static int dec_rtc_set_mmss(unsigned long nowtime) */ CMOS_WRITE(save_control, RTC_CONTROL); CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); + spin_unlock(&rtc_lock); return retval; } diff --git a/arch/mips/jmr3927/common/rtc_ds1742.c b/arch/mips/jmr3927/common/rtc_ds1742.c index 1ae4318..8b407d7 100644 --- a/arch/mips/jmr3927/common/rtc_ds1742.c +++ b/arch/mips/jmr3927/common/rtc_ds1742.c @@ -57,7 +57,9 @@ rtc_ds1742_get_time(void) { unsigned int year, month, day, hour, minute, second; unsigned int century; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); CMOS_WRITE(RTC_READ, RTC_CONTROL); second = BCD2BIN(CMOS_READ(RTC_SECONDS) & RTC_SECONDS_MASK); minute = BCD2BIN(CMOS_READ(RTC_MINUTES)); @@ -67,6 +69,7 @@ rtc_ds1742_get_time(void) year = BCD2BIN(CMOS_READ(RTC_YEAR)); century = BCD2BIN(CMOS_READ(RTC_CENTURY) & RTC_CENTURY_MASK); CMOS_WRITE(0, RTC_CONTROL); + spin_unlock_irqrestore(&rtc_lock, flags); year += century * 100; @@ -81,7 +84,9 @@ rtc_ds1742_set_time(unsigned long t) u8 year, month, day, hour, minute, second; u8 cmos_year, cmos_month, cmos_day, cmos_hour, cmos_minute, cmos_second; int cmos_century; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); CMOS_WRITE(RTC_READ, RTC_CONTROL); cmos_second = (u8)(CMOS_READ(RTC_SECONDS) & RTC_SECONDS_MASK); cmos_minute = (u8)CMOS_READ(RTC_MINUTES); @@ -139,6 +144,7 @@ rtc_ds1742_set_time(unsigned long t) /* RTC_CENTURY and RTC_CONTROL share same address... */ CMOS_WRITE(cmos_century, RTC_CONTROL); + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/kernel/ioctl32.c b/arch/mips/kernel/ioctl32.c index ed9b2da..9ea1fc7 100644 --- a/arch/mips/kernel/ioctl32.c +++ b/arch/mips/kernel/ioctl32.c @@ -26,10 +26,8 @@ long sys_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg); #define CODE #include "compat_ioctl.c" -typedef int (* ioctl32_handler_t)(unsigned int, unsigned int, unsigned long, struct file *); - #define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL((cmd),sys_ioctl) -#define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl32_handler_t)(handler), NULL }, +#define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl_trans_handler_t)(handler), NULL }, #define IOCTL_TABLE_START \ struct ioctl_trans ioctl_start[] = { #define IOCTL_TABLE_END \ diff --git a/arch/mips/kernel/irixsig.c b/arch/mips/kernel/irixsig.c index 908e636..dd118c6 100644 --- a/arch/mips/kernel/irixsig.c +++ b/arch/mips/kernel/irixsig.c @@ -502,8 +502,7 @@ asmlinkage int irix_sigpoll_sys(unsigned long __user *set, while(1) { long tmp = 0; - current->state = TASK_INTERRUPTIBLE; - expire = schedule_timeout(expire); + expire = schedule_timeout_interruptible(expire); for (i=0; i<=4; i++) tmp |= (current->pending.signal.sig[i] & kset.sig[i]); diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 4fe3d57..dd72577 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -52,7 +52,9 @@ ATTRIB_NORET void cpu_idle(void) while (!need_resched()) if (cpu_wait) (*cpu_wait)(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index f1b0f3e..510da5f 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -174,51 +174,10 @@ int ptrace_setfpregs (struct task_struct *child, __u32 __user *data) return 0; } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret; -#if 0 - printk("ptrace(r=%d,pid=%d,addr=%08lx,data=%08lx)\n", - (int) request, (int) pid, (unsigned long) addr, - (unsigned long) data); -#endif - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - if ((ret = security_ptrace(current->parent, current))) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -319,7 +278,7 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) if (!cpu_has_dsp) { tmp = 0; ret = -EIO; - goto out_tsk; + goto out; } if (child->thread.dsp.used_dsp) { dregs = __get_dsp_regs(child); @@ -333,14 +292,14 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) if (!cpu_has_dsp) { tmp = 0; ret = -EIO; - goto out_tsk; + goto out; } tmp = child->thread.dsp.dspcontrol; break; default: tmp = 0; ret = -EIO; - goto out_tsk; + goto out; } ret = put_user(tmp, (unsigned long __user *) data); break; @@ -495,11 +454,7 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } - -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + out: return ret; } diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index 8c81f3c..1d85511 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -20,42 +20,42 @@ #include <linux/module.h> #include <linux/fs.h> #include <linux/init.h> -#include <asm/uaccess.h> -#include <linux/slab.h> -#include <linux/list.h> -#include <linux/vmalloc.h> -#include <linux/elf.h> -#include <linux/seq_file.h> -#include <linux/syscalls.h> -#include <linux/moduleloader.h> -#include <linux/interrupt.h> #include <linux/poll.h> #include <linux/sched.h> #include <linux/wait.h> #include <asm/mipsmtregs.h> -#include <asm/cacheflush.h> -#include <asm/atomic.h> +#include <asm/bitops.h> #include <asm/cpu.h> #include <asm/processor.h> -#include <asm/system.h> #include <asm/rtlx.h> +#include <asm/uaccess.h> -#define RTLX_MAJOR 64 #define RTLX_TARG_VPE 1 -struct rtlx_info *rtlx; +static struct rtlx_info *rtlx; static int major; static char module_name[] = "rtlx"; -static inline int spacefree(int read, int write, int size); +static struct irqaction irq; +static int irq_num; + +static inline int spacefree(int read, int write, int size) +{ + if (read == write) { + /* + * never fill the buffer completely, so indexes are always + * equal if empty and only empty, or !equal if data available + */ + return size - 1; + } + + return ((read + size - write) % size) - 1; +} static struct chan_waitqueues { wait_queue_head_t rt_queue; wait_queue_head_t lx_queue; } channel_wqs[RTLX_CHANNELS]; -static struct irqaction irq; -static int irq_num; - extern void *vpe_get_shared(int index); static void rtlx_dispatch(struct pt_regs *regs) @@ -63,9 +63,8 @@ static void rtlx_dispatch(struct pt_regs *regs) do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ, regs); } -irqreturn_t rtlx_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t rtlx_interrupt(int irq, void *dev_id, struct pt_regs *regs) { - irqreturn_t r = IRQ_HANDLED; int i; for (i = 0; i < RTLX_CHANNELS; i++) { @@ -75,30 +74,7 @@ irqreturn_t rtlx_interrupt(int irq, void *dev_id, struct pt_regs *regs) wake_up_interruptible(&channel_wqs[i].lx_queue); } - return r; -} - -void dump_rtlx(void) -{ - int i; - - printk("id 0x%lx state %d\n", rtlx->id, rtlx->state); - - for (i = 0; i < RTLX_CHANNELS; i++) { - struct rtlx_channel *chan = &rtlx->channel[i]; - - printk(" rt_state %d lx_state %d buffer_size %d\n", - chan->rt_state, chan->lx_state, chan->buffer_size); - - printk(" rt_read %d rt_write %d\n", - chan->rt_read, chan->rt_write); - - printk(" lx_read %d lx_write %d\n", - chan->lx_read, chan->lx_write); - - printk(" rt_buffer <%s>\n", chan->rt_buffer); - printk(" lx_buffer <%s>\n", chan->lx_buffer); - } + return IRQ_HANDLED; } /* call when we have the address of the shared structure from the SP side. */ @@ -108,7 +84,7 @@ static int rtlx_init(struct rtlx_info *rtlxi) if (rtlxi->id != RTLX_ID) { printk(KERN_WARNING "no valid RTLX id at 0x%p\n", rtlxi); - return (-ENOEXEC); + return -ENOEXEC; } /* initialise the wait queues */ @@ -120,9 +96,8 @@ static int rtlx_init(struct rtlx_info *rtlxi) /* set up for interrupt handling */ memset(&irq, 0, sizeof(struct irqaction)); - if (cpu_has_vint) { + if (cpu_has_vint) set_vi_handler(MIPS_CPU_RTLX_IRQ, rtlx_dispatch); - } irq_num = MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ; irq.handler = rtlx_interrupt; @@ -132,7 +107,8 @@ static int rtlx_init(struct rtlx_info *rtlxi) setup_irq(irq_num, &irq); rtlx = rtlxi; - return (0); + + return 0; } /* only allow one open process at a time to open each channel */ @@ -147,36 +123,36 @@ static int rtlx_open(struct inode *inode, struct file *filp) if (rtlx == NULL) { struct rtlx_info **p; if( (p = vpe_get_shared(RTLX_TARG_VPE)) == NULL) { - printk(" vpe_get_shared is NULL. Has an SP program been loaded?\n"); - return (-EFAULT); + printk(KERN_ERR "vpe_get_shared is NULL. " + "Has an SP program been loaded?\n"); + return -EFAULT; } if (*p == NULL) { - printk(" vpe_shared %p %p\n", p, *p); - return (-EFAULT); + printk(KERN_ERR "vpe_shared %p %p\n", p, *p); + return -EFAULT; } if ((ret = rtlx_init(*p)) < 0) - return (ret); + return ret; } chan = &rtlx->channel[minor]; - /* already open? */ - if (chan->lx_state == RTLX_STATE_OPENED) - return (-EBUSY); + if (test_and_set_bit(RTLX_STATE_OPENED, &chan->lx_state)) + return -EBUSY; - chan->lx_state = RTLX_STATE_OPENED; - return (0); + return 0; } static int rtlx_release(struct inode *inode, struct file *filp) { - int minor; + int minor = MINOR(inode->i_rdev); - minor = MINOR(inode->i_rdev); - rtlx->channel[minor].lx_state = RTLX_STATE_UNUSED; - return (0); + clear_bit(RTLX_STATE_OPENED, &rtlx->channel[minor].lx_state); + smp_mb__after_clear_bit(); + + return 0; } static unsigned int rtlx_poll(struct file *file, poll_table * wait) @@ -199,12 +175,13 @@ static unsigned int rtlx_poll(struct file *file, poll_table * wait) if (spacefree(chan->rt_read, chan->rt_write, chan->buffer_size)) mask |= POLLOUT | POLLWRNORM; - return (mask); + return mask; } static ssize_t rtlx_read(struct file *file, char __user * buffer, size_t count, loff_t * ppos) { + unsigned long failed; size_t fl = 0L; int minor; struct rtlx_channel *lx; @@ -216,7 +193,7 @@ static ssize_t rtlx_read(struct file *file, char __user * buffer, size_t count, /* data available? */ if (lx->lx_write == lx->lx_read) { if (file->f_flags & O_NONBLOCK) - return (0); // -EAGAIN makes cat whinge + return 0; /* -EAGAIN makes cat whinge */ /* go to sleep */ add_wait_queue(&channel_wqs[minor].lx_queue, &wait); @@ -232,39 +209,39 @@ static ssize_t rtlx_read(struct file *file, char __user * buffer, size_t count, } /* find out how much in total */ - count = min( count, - (size_t)(lx->lx_write + lx->buffer_size - lx->lx_read) % lx->buffer_size); + count = min(count, + (size_t)(lx->lx_write + lx->buffer_size - lx->lx_read) % lx->buffer_size); /* then how much from the read pointer onwards */ - fl = min( count, (size_t)lx->buffer_size - lx->lx_read); + fl = min(count, (size_t)lx->buffer_size - lx->lx_read); - copy_to_user (buffer, &lx->lx_buffer[lx->lx_read], fl); + failed = copy_to_user (buffer, &lx->lx_buffer[lx->lx_read], fl); + if (failed) { + count = fl - failed; + goto out; + } /* and if there is anything left at the beginning of the buffer */ - if ( count - fl ) - copy_to_user (buffer + fl, lx->lx_buffer, count - fl); + if (count - fl) { + failed = copy_to_user (buffer + fl, lx->lx_buffer, count - fl); + if (failed) { + count -= failed; + goto out; + } + } +out: /* update the index */ lx->lx_read += count; lx->lx_read %= lx->buffer_size; - return (count); -} - -static inline int spacefree(int read, int write, int size) -{ - if (read == write) { - /* never fill the buffer completely, so indexes are always equal if empty - and only empty, or !equal if data available */ - return (size - 1); - } - - return ((read + size - write) % size) - 1; + return count; } static ssize_t rtlx_write(struct file *file, const char __user * buffer, size_t count, loff_t * ppos) { + unsigned long failed; int minor; struct rtlx_channel *rt; size_t fl; @@ -277,7 +254,7 @@ static ssize_t rtlx_write(struct file *file, const char __user * buffer, if (!spacefree(rt->rt_read, rt->rt_write, rt->buffer_size)) { if (file->f_flags & O_NONBLOCK) - return (-EAGAIN); + return -EAGAIN; add_wait_queue(&channel_wqs[minor].rt_queue, &wait); set_current_state(TASK_INTERRUPTIBLE); @@ -290,52 +267,64 @@ static ssize_t rtlx_write(struct file *file, const char __user * buffer, } /* total number of bytes to copy */ - count = min( count, (size_t)spacefree(rt->rt_read, rt->rt_write, rt->buffer_size) ); + count = min(count, (size_t)spacefree(rt->rt_read, rt->rt_write, rt->buffer_size) ); /* first bit from write pointer to the end of the buffer, or count */ fl = min(count, (size_t) rt->buffer_size - rt->rt_write); - copy_from_user(&rt->rt_buffer[rt->rt_write], buffer, fl); + failed = copy_from_user(&rt->rt_buffer[rt->rt_write], buffer, fl); + if (failed) { + count = fl - failed; + goto out; + } /* if there's any left copy to the beginning of the buffer */ - if( count - fl ) - copy_from_user(rt->rt_buffer, buffer + fl, count - fl); + if (count - fl) { + failed = copy_from_user(rt->rt_buffer, buffer + fl, count - fl); + if (failed) { + count -= failed; + goto out; + } + } +out: rt->rt_write += count; rt->rt_write %= rt->buffer_size; - return(count); + return count; } static struct file_operations rtlx_fops = { - .owner = THIS_MODULE, - .open = rtlx_open, - .release = rtlx_release, - .write = rtlx_write, - .read = rtlx_read, - .poll = rtlx_poll + .owner = THIS_MODULE, + .open = rtlx_open, + .release = rtlx_release, + .write = rtlx_write, + .read = rtlx_read, + .poll = rtlx_poll }; -static int rtlx_module_init(void) +static char register_chrdev_failed[] __initdata = + KERN_ERR "rtlx_module_init: unable to register device\n"; + +static int __init rtlx_module_init(void) { - if ((major = register_chrdev(RTLX_MAJOR, module_name, &rtlx_fops)) < 0) { - printk("rtlx_module_init: unable to register device\n"); - return (-EBUSY); + major = register_chrdev(0, module_name, &rtlx_fops); + if (major < 0) { + printk(register_chrdev_failed); + return major; } - if (major == 0) - major = RTLX_MAJOR; - - return (0); + return 0; } -static void rtlx_module_exit(void) +static void __exit rtlx_module_exit(void) { unregister_chrdev(major, module_name); } module_init(rtlx_module_init); module_exit(rtlx_module_exit); + MODULE_DESCRIPTION("MIPS RTLX"); -MODULE_AUTHOR("Elizabeth Clarke, MIPS Technologies, Inc"); +MODULE_AUTHOR("Elizabeth Clarke, MIPS Technologies, Inc."); MODULE_LICENSE("GPL"); diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 9202a17..05e09ee 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -384,9 +384,6 @@ give_sigsegv: return 0; } -extern void setup_rt_frame_n32(struct k_sigaction * ka, - struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info); - static inline int handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, sigset_t *oldset, struct pt_regs *regs) { diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index dbe8213..e315d3f 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -647,8 +647,8 @@ static inline void *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, return (void *)((sp - frame_size) & ALMASK); } -void setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, - int signr, sigset_t *set) +int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, + int signr, sigset_t *set) { struct sigframe *frame; int err = 0; @@ -694,13 +694,15 @@ void setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, current->comm, current->pid, frame, regs->cp0_epc, frame->sf_code); #endif - return; + return 1; give_sigsegv: force_sigsegv(signr, current); + return 0; } -void setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info) +int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs, + int signr, sigset_t *set, siginfo_t *info) { struct rt_sigframe32 *frame; int err = 0; @@ -763,10 +765,11 @@ void setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs, int signr, current->comm, current->pid, frame, regs->cp0_epc, frame->rs_code); #endif - return; + return 1; give_sigsegv: force_sigsegv(signr, current); + return 0; } static inline int handle_signal(unsigned long sig, siginfo_t *info, diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index fcacf1a..25472fc 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -82,7 +82,7 @@ extern ATTRIB_NORET void cpu_idle(void); */ asmlinkage void start_secondary(void) { - unsigned int cpu = smp_processor_id(); + unsigned int cpu; cpu_probe(); cpu_report(); @@ -95,6 +95,8 @@ asmlinkage void start_secondary(void) */ calibrate_delay(); + preempt_disable(); + cpu = smp_processor_id(); cpu_data[cpu].udelay_val = loops_per_jiffy; prom_smp_finish(); diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 97fefcc..06be405 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -58,10 +58,6 @@ typedef void *vpe_handle; -// defined here because the kernel module loader doesn't have -// anything to do with it. -#define SHN_MIPS_SCOMMON 0xff03 - #ifndef ARCH_SHF_SMALL #define ARCH_SHF_SMALL 0 #endif @@ -69,11 +65,8 @@ typedef void *vpe_handle; /* If this is set, the section belongs in the init part of the module */ #define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1)) -// temp number, -#define VPE_MAJOR 63 - static char module_name[] = "vpe"; -static int major = 0; +static int major; /* grab the likely amount of memory we will need. */ #ifdef CONFIG_MIPS_VPE_LOADER_TOM @@ -98,22 +91,7 @@ enum tc_state { TC_STATE_DYNAMIC }; -struct vpe; -typedef struct tc { - enum tc_state state; - int index; - - /* parent VPE */ - struct vpe *pvpe; - - /* The list of TC's with this VPE */ - struct list_head tc; - - /* The global list of tc's */ - struct list_head list; -} tc_t; - -typedef struct vpe { +struct vpe { enum vpe_state state; /* (device) minor associated with this vpe */ @@ -135,7 +113,21 @@ typedef struct vpe { /* shared symbol address */ void *shared_ptr; -} vpe_t; +}; + +struct tc { + enum tc_state state; + int index; + + /* parent VPE */ + struct vpe *pvpe; + + /* The list of TC's with this VPE */ + struct list_head tc; + + /* The global list of tc's */ + struct list_head list; +}; struct vpecontrol_ { /* Virtual processing elements */ @@ -146,7 +138,7 @@ struct vpecontrol_ { } vpecontrol; static void release_progmem(void *ptr); -static void dump_vpe(vpe_t * v); +static void dump_vpe(struct vpe * v); extern void save_gp_address(unsigned int secbase, unsigned int rel); /* get the vpe associated with this minor */ @@ -197,13 +189,11 @@ struct vpe *alloc_vpe(int minor) { struct vpe *v; - if ((v = kmalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) { + if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) { printk(KERN_WARNING "VPE: alloc_vpe no mem\n"); return NULL; } - memset(v, 0, sizeof(struct vpe)); - INIT_LIST_HEAD(&v->tc); list_add_tail(&v->list, &vpecontrol.vpe_list); @@ -216,13 +206,11 @@ struct tc *alloc_tc(int index) { struct tc *t; - if ((t = kmalloc(sizeof(struct tc), GFP_KERNEL)) == NULL) { + if ((t = kzalloc(sizeof(struct tc), GFP_KERNEL)) == NULL) { printk(KERN_WARNING "VPE: alloc_tc no mem\n"); return NULL; } - memset(t, 0, sizeof(struct tc)); - INIT_LIST_HEAD(&t->tc); list_add_tail(&t->list, &vpecontrol.tc_list); @@ -412,16 +400,17 @@ static int apply_r_mips_26(struct module *me, uint32_t *location, return -ENOEXEC; } -/* Not desperately convinced this is a good check of an overflow condition - anyway. But it gets in the way of handling undefined weak symbols which - we want to set to zero. - if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) { - printk(KERN_ERR - "module %s: relocation overflow\n", - me->name); - return -ENOEXEC; - } -*/ +/* + * Not desperately convinced this is a good check of an overflow condition + * anyway. But it gets in the way of handling undefined weak symbols which + * we want to set to zero. + * if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) { + * printk(KERN_ERR + * "module %s: relocation overflow\n", + * me->name); + * return -ENOEXEC; + * } + */ *location = (*location & ~0x03ffffff) | ((*location + (v >> 2)) & 0x03ffffff); @@ -681,7 +670,7 @@ static void dump_tclist(void) } /* We are prepared so configure and start the VPE... */ -int vpe_run(vpe_t * v) +int vpe_run(struct vpe * v) { unsigned long val; struct tc *t; @@ -772,7 +761,7 @@ int vpe_run(vpe_t * v) return 0; } -static unsigned long find_vpe_symbols(vpe_t * v, Elf_Shdr * sechdrs, +static unsigned long find_vpe_symbols(struct vpe * v, Elf_Shdr * sechdrs, unsigned int symindex, const char *strtab, struct module *mod) { @@ -792,10 +781,12 @@ static unsigned long find_vpe_symbols(vpe_t * v, Elf_Shdr * sechdrs, return 0; } -/* Allocates a VPE with some program code space(the load address), copies the contents - of the program (p)buffer performing relocatations/etc, free's it when finished. +/* + * Allocates a VPE with some program code space(the load address), copies + * the contents of the program (p)buffer performing relocatations/etc, + * free's it when finished. */ -int vpe_elfload(vpe_t * v) +int vpe_elfload(struct vpe * v) { Elf_Ehdr *hdr; Elf_Shdr *sechdrs; @@ -931,7 +922,7 @@ cleanup: return err; } -static void dump_vpe(vpe_t * v) +static void dump_vpe(struct vpe * v) { struct tc *t; @@ -947,7 +938,7 @@ static void dump_vpe(vpe_t * v) static int vpe_open(struct inode *inode, struct file *filp) { int minor; - vpe_t *v; + struct vpe *v; /* assume only 1 device at the mo. */ if ((minor = MINOR(inode->i_rdev)) != 1) { @@ -1001,7 +992,7 @@ static int vpe_open(struct inode *inode, struct file *filp) static int vpe_release(struct inode *inode, struct file *filp) { int minor, ret = 0; - vpe_t *v; + struct vpe *v; Elf_Ehdr *hdr; minor = MINOR(inode->i_rdev); @@ -1035,7 +1026,7 @@ static ssize_t vpe_write(struct file *file, const char __user * buffer, { int minor; size_t ret = count; - vpe_t *v; + struct vpe *v; minor = MINOR(file->f_dentry->d_inode->i_rdev); if ((v = get_vpe(minor)) == NULL) @@ -1180,14 +1171,11 @@ static int __init vpe_module_init(void) return -ENODEV; } - if ((major = register_chrdev(VPE_MAJOR, module_name, &vpe_fops) < 0)) { + if ((major = register_chrdev(0, module_name, &vpe_fops) < 0)) { printk("VPE loader: unable to register character device\n"); - return -EBUSY; + return major; } - if (major == 0) - major = VPE_MAJOR; - dmt(); dvpe(); diff --git a/arch/mips/lasat/ds1603.c b/arch/mips/lasat/ds1603.c index 9d7812e..7dced67 100644 --- a/arch/mips/lasat/ds1603.c +++ b/arch/mips/lasat/ds1603.c @@ -8,6 +8,7 @@ #include <asm/lasat/lasat.h> #include <linux/delay.h> #include <asm/lasat/ds1603.h> +#include <asm/time.h> #include "ds1603.h" @@ -138,19 +139,27 @@ static void rtc_end_op(void) unsigned long ds1603_read(void) { unsigned long word; + unsigned long flags; + + spin_lock_irqsave(&rtc_lock, flags); rtc_init_op(); rtc_write_byte(READ_TIME_CMD); word = rtc_read_word(); rtc_end_op(); + spin_unlock_irqrestore(&rtc_lock, flags); return word; } int ds1603_set(unsigned long time) { + unsigned long flags; + + spin_lock_irqsave(&rtc_lock, flags); rtc_init_op(); rtc_write_byte(SET_TIME_CMD); rtc_write_word(time); rtc_end_op(); + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c index 768bf44..bab192d 100644 --- a/arch/mips/momentum/jaguar_atx/setup.c +++ b/arch/mips/momentum/jaguar_atx/setup.c @@ -149,7 +149,9 @@ arch_initcall(per_cpu_mappings); unsigned long m48t37y_get_time(void) { unsigned int year, month, day, hour, min, sec; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); /* stop the update */ rtc_base[0x7ff8] = 0x40; @@ -166,6 +168,7 @@ unsigned long m48t37y_get_time(void) /* start the update */ rtc_base[0x7ff8] = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return mktime(year, month, day, hour, min, sec); } @@ -173,11 +176,13 @@ unsigned long m48t37y_get_time(void) int m48t37y_set_time(unsigned long sec) { struct rtc_time tm; + unsigned long flags; /* convert to a more useful format -- note months count from 0 */ to_tm(sec, &tm); tm.tm_mon += 1; + spin_lock_irqsave(&rtc_lock, flags); /* enable writing */ rtc_base[0x7ff8] = 0x80; @@ -201,6 +206,7 @@ int m48t37y_set_time(unsigned long sec) /* disable writing */ rtc_base[0x7ff8] = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/momentum/ocelot_3/setup.c b/arch/mips/momentum/ocelot_3/setup.c index a7803e0..c9b7ff8 100644 --- a/arch/mips/momentum/ocelot_3/setup.c +++ b/arch/mips/momentum/ocelot_3/setup.c @@ -135,7 +135,9 @@ void setup_wired_tlb_entries(void) unsigned long m48t37y_get_time(void) { unsigned int year, month, day, hour, min, sec; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); /* stop the update */ rtc_base[0x7ff8] = 0x40; @@ -152,6 +154,7 @@ unsigned long m48t37y_get_time(void) /* start the update */ rtc_base[0x7ff8] = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return mktime(year, month, day, hour, min, sec); } @@ -159,11 +162,13 @@ unsigned long m48t37y_get_time(void) int m48t37y_set_time(unsigned long sec) { struct rtc_time tm; + unsigned long flags; /* convert to a more useful format -- note months count from 0 */ to_tm(sec, &tm); tm.tm_mon += 1; + spin_lock_irqsave(&rtc_lock, flags); /* enable writing */ rtc_base[0x7ff8] = 0x80; @@ -187,6 +192,7 @@ int m48t37y_set_time(unsigned long sec) /* disable writing */ rtc_base[0x7ff8] = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/momentum/ocelot_c/setup.c b/arch/mips/momentum/ocelot_c/setup.c index ce70fc9..2755c15 100644 --- a/arch/mips/momentum/ocelot_c/setup.c +++ b/arch/mips/momentum/ocelot_c/setup.c @@ -140,7 +140,9 @@ unsigned long m48t37y_get_time(void) unsigned char* rtc_base = (unsigned char*)0xfc800000; #endif unsigned int year, month, day, hour, min, sec; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); /* stop the update */ rtc_base[0x7ff8] = 0x40; @@ -157,6 +159,7 @@ unsigned long m48t37y_get_time(void) /* start the update */ rtc_base[0x7ff8] = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return mktime(year, month, day, hour, min, sec); } @@ -169,11 +172,13 @@ int m48t37y_set_time(unsigned long sec) unsigned char* rtc_base = (unsigned char*)0xfc800000; #endif struct rtc_time tm; + unsigned long flags; /* convert to a more useful format -- note months count from 0 */ to_tm(sec, &tm); tm.tm_mon += 1; + spin_lock_irqsave(&rtc_lock, flags); /* enable writing */ rtc_base[0x7ff8] = 0x80; @@ -197,6 +202,7 @@ int m48t37y_set_time(unsigned long sec) /* disable writing */ rtc_base[0x7ff8] = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c index bdc2ab5..059755b 100644 --- a/arch/mips/pmc-sierra/yosemite/setup.c +++ b/arch/mips/pmc-sierra/yosemite/setup.c @@ -73,7 +73,9 @@ void __init bus_error_init(void) unsigned long m48t37y_get_time(void) { unsigned int year, month, day, hour, min, sec; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); /* Stop the update to the time */ m48t37_base->control = 0x40; @@ -88,6 +90,7 @@ unsigned long m48t37y_get_time(void) /* Start the update to the time again */ m48t37_base->control = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return mktime(year, month, day, hour, min, sec); } @@ -95,11 +98,13 @@ unsigned long m48t37y_get_time(void) int m48t37y_set_time(unsigned long sec) { struct rtc_time tm; + unsigned long flags; /* convert to a more useful format -- note months count from 0 */ to_tm(sec, &tm); tm.tm_mon += 1; + spin_lock_irqsave(&rtc_lock, flags); /* enable writing */ m48t37_base->control = 0x80; @@ -123,6 +128,7 @@ int m48t37y_set_time(unsigned long sec) /* disable writing */ m48t37_base->control = 0x00; + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c index df9b569..b7300cc 100644 --- a/arch/mips/sgi-ip22/ip22-time.c +++ b/arch/mips/sgi-ip22/ip22-time.c @@ -35,7 +35,9 @@ static unsigned long indy_rtc_get_time(void) { unsigned int yrs, mon, day, hrs, min, sec; unsigned int save_control; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); save_control = hpc3c0->rtcregs[RTC_CMD] & 0xff; hpc3c0->rtcregs[RTC_CMD] = save_control | RTC_TE; @@ -47,6 +49,7 @@ static unsigned long indy_rtc_get_time(void) yrs = BCD2BIN(hpc3c0->rtcregs[RTC_YEAR] & 0xff); hpc3c0->rtcregs[RTC_CMD] = save_control; + spin_unlock_irqrestore(&rtc_lock, flags); if (yrs < 45) yrs += 30; @@ -60,6 +63,7 @@ static int indy_rtc_set_time(unsigned long tim) { struct rtc_time tm; unsigned int save_control; + unsigned long flags; to_tm(tim, &tm); @@ -68,6 +72,7 @@ static int indy_rtc_set_time(unsigned long tim) if (tm.tm_year >= 100) tm.tm_year -= 100; + spin_lock_irqsave(&rtc_lock, flags); save_control = hpc3c0->rtcregs[RTC_CMD] & 0xff; hpc3c0->rtcregs[RTC_CMD] = save_control | RTC_TE; @@ -80,6 +85,7 @@ static int indy_rtc_set_time(unsigned long tim) hpc3c0->rtcregs[RTC_HUNDREDTH_SECOND] = 0; hpc3c0->rtcregs[RTC_CMD] = save_control; + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } diff --git a/arch/mips/sibyte/swarm/rtc_m41t81.c b/arch/mips/sibyte/swarm/rtc_m41t81.c index 5b4fc26..c13914b 100644 --- a/arch/mips/sibyte/swarm/rtc_m41t81.c +++ b/arch/mips/sibyte/swarm/rtc_m41t81.c @@ -144,6 +144,7 @@ static int m41t81_write(uint8_t addr, int b) int m41t81_set_time(unsigned long t) { struct rtc_time tm; + unsigned long flags; to_tm(t, &tm); @@ -153,6 +154,7 @@ int m41t81_set_time(unsigned long t) * believe we should finish writing min within a second. */ + spin_lock_irqsave(&rtc_lock, flags); tm.tm_sec = BIN2BCD(tm.tm_sec); m41t81_write(M41T81REG_SC, tm.tm_sec); @@ -180,6 +182,7 @@ int m41t81_set_time(unsigned long t) tm.tm_year %= 100; tm.tm_year = BIN2BCD(tm.tm_year); m41t81_write(M41T81REG_YR, tm.tm_year); + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } @@ -187,19 +190,23 @@ int m41t81_set_time(unsigned long t) unsigned long m41t81_get_time(void) { unsigned int year, mon, day, hour, min, sec; + unsigned long flags; /* * min is valid if two reads of sec are the same. */ for (;;) { + spin_lock_irqsave(&rtc_lock, flags); sec = m41t81_read(M41T81REG_SC); min = m41t81_read(M41T81REG_MN); if (sec == m41t81_read(M41T81REG_SC)) break; + spin_unlock_irqrestore(&rtc_lock, flags); } hour = m41t81_read(M41T81REG_HR) & 0x3f; day = m41t81_read(M41T81REG_DT); mon = m41t81_read(M41T81REG_MO); year = m41t81_read(M41T81REG_YR); + spin_unlock_irqrestore(&rtc_lock, flags); sec = BCD2BIN(sec); min = BCD2BIN(min); diff --git a/arch/mips/sibyte/swarm/rtc_xicor1241.c b/arch/mips/sibyte/swarm/rtc_xicor1241.c index d9ff932..f4a1788 100644 --- a/arch/mips/sibyte/swarm/rtc_xicor1241.c +++ b/arch/mips/sibyte/swarm/rtc_xicor1241.c @@ -113,9 +113,11 @@ int xicor_set_time(unsigned long t) { struct rtc_time tm; int tmp; + unsigned long flags; to_tm(t, &tm); + spin_lock_irqsave(&rtc_lock, flags); /* unlock writes to the CCR */ xicor_write(X1241REG_SR, X1241REG_SR_WEL); xicor_write(X1241REG_SR, X1241REG_SR_WEL | X1241REG_SR_RWEL); @@ -160,6 +162,7 @@ int xicor_set_time(unsigned long t) xicor_write(X1241REG_HR, tmp); xicor_write(X1241REG_SR, 0); + spin_unlock_irqrestore(&rtc_lock, flags); return 0; } @@ -167,7 +170,9 @@ int xicor_set_time(unsigned long t) unsigned long xicor_get_time(void) { unsigned int year, mon, day, hour, min, sec, y2k; + unsigned long flags; + spin_lock_irqsave(&rtc_lock, flags); sec = xicor_read(X1241REG_SC); min = xicor_read(X1241REG_MN); hour = xicor_read(X1241REG_HR); @@ -183,6 +188,7 @@ unsigned long xicor_get_time(void) mon = xicor_read(X1241REG_MO); year = xicor_read(X1241REG_YR); y2k = xicor_read(X1241REG_Y2K); + spin_unlock_irqrestore(&rtc_lock, flags); sec = BCD2BIN(sec); min = BCD2BIN(min); diff --git a/arch/mips/tx4938/toshiba_rbtx4938/irq.c b/arch/mips/tx4938/toshiba_rbtx4938/irq.c index 230f5a9..9cd9c0f 100644 --- a/arch/mips/tx4938/toshiba_rbtx4938/irq.c +++ b/arch/mips/tx4938/toshiba_rbtx4938/irq.c @@ -84,7 +84,6 @@ IRQ Device #include <asm/ptrace.h> #include <asm/reboot.h> #include <asm/time.h> -#include <linux/version.h> #include <linux/bootmem.h> #include <asm/tx4938/rbtx4938.h> diff --git a/arch/parisc/kernel/asm-offsets.c b/arch/parisc/kernel/asm-offsets.c index 1ad44f9..e23c4e1 100644 --- a/arch/parisc/kernel/asm-offsets.c +++ b/arch/parisc/kernel/asm-offsets.c @@ -30,7 +30,6 @@ #include <linux/types.h> #include <linux/sched.h> #include <linux/thread_info.h> -#include <linux/version.h> #include <linux/ptrace.h> #include <linux/hardirq.h> diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c index 7fdca87..fee4f1f 100644 --- a/arch/parisc/kernel/process.c +++ b/arch/parisc/kernel/process.c @@ -88,11 +88,15 @@ void default_idle(void) */ void cpu_idle(void) { + set_thread_flag(TIF_POLLING_NRFLAG); + /* endless idle loop with no priority at all */ while (1) { while (!need_resched()) barrier(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); check_pgt_cache(); } } diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c index 18130c3..b6fe202 100644 --- a/arch/parisc/kernel/ptrace.c +++ b/arch/parisc/kernel/ptrace.c @@ -78,52 +78,13 @@ void ptrace_disable(struct task_struct *child) pa_psw(child)->l = 0; } -long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; long ret; #ifdef DEBUG_PTRACE long oaddr=addr, odata=data; #endif - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - ret = -EPERM; - if (pid == 1) /* no messing around with init! */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { case PTRACE_PEEKTEXT: /* read word at location addr. */ case PTRACE_PEEKDATA: { @@ -383,11 +344,11 @@ long sys_ptrace(long request, long pid, long addr, long data) case PTRACE_GETEVENTMSG: ret = put_user(child->ptrace_message, (unsigned int __user *) data); - goto out_tsk; + goto out; default: ret = ptrace_request(child, request, addr, data); - goto out_tsk; + goto out; } out_wake_notrap: @@ -396,10 +357,7 @@ out_wake: wake_up_process(child); ret = 0; out_tsk: - put_task_struct(child); -out: - unlock_kernel(); - DBG("sys_ptrace(%ld, %d, %lx, %lx) returning %ld\n", + DBG("arch_ptrace(%ld, %d, %lx, %lx) returning %ld\n", request, pid, oaddr, odata, ret); return ret; } diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c index 5db3be4..a9ecf64 100644 --- a/arch/parisc/kernel/smp.c +++ b/arch/parisc/kernel/smp.c @@ -463,6 +463,7 @@ void __init smp_callin(void) #endif smp_cpu_init(slave_id); + preempt_disable(); #if 0 /* NOT WORKING YET - see entry.S */ istack = (void *)__get_free_pages(GFP_KERNEL,ISTACK_ORDER); diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 967ecf9..ed31062 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -300,6 +300,7 @@ config PPC_PMAC64 bool depends on PPC_PMAC && POWER4 select U3_DART + select GENERIC_TBSYNC default y config PPC_PREP @@ -314,15 +315,17 @@ config PPC_MAPLE bool " Maple 970FX Evaluation Board" select U3_DART select MPIC_BROKEN_U3 + select GENERIC_TBSYNC default n help This option enables support for the Maple 970FX Evaluation Board. For more informations, refer to <http://www.970eval.com> -config PPC_BPA - bool " Broadband Processor Architecture" +config PPC_CELL + bool " Cell Broadband Processor Architecture" depends on PPC_MULTIPLATFORM && PPC64 select PPC_RTAS + select MMIO_NVRAM config PPC_OF bool @@ -353,13 +356,26 @@ config RTAS_ERROR_LOGGING depends on PPC_RTAS default n +config RTAS_PROC + bool "Proc interface to RTAS" + depends on PPC_RTAS + default y + +config RTAS_FLASH + tristate "Firmware flash interface" + depends on PPC64 && RTAS_PROC + +config MMIO_NVRAM + bool + default n + config MPIC_BROKEN_U3 bool depends on PPC_MAPLE default y -config BPA_IIC - depends on PPC_BPA +config CELL_IIC + depends on PPC_CELL bool default y @@ -372,6 +388,11 @@ config PPC_MPC106 bool default n +config GENERIC_TBSYNC + bool + default y if CONFIG_PPC32 && CONFIG_SMP + default n + source "drivers/cpufreq/Kconfig" config CPU_FREQ_PMAC @@ -383,6 +404,14 @@ config CPU_FREQ_PMAC this currently includes some models of iBook & Titanium PowerBook. +config CPU_FREQ_PMAC64 + bool "Support for some Apple G5s" + depends on CPU_FREQ && PMAC_SMU && PPC64 + select CPU_FREQ_TABLE + help + This adds support for frequency switching on Apple iMac G5, + and some of the more recent desktop G5 machines as well. + config PPC601_SYNC_FIX bool "Workarounds for PPC601 bugs" depends on 6xx && (PPC_PREP || PPC_PMAC) @@ -463,6 +492,7 @@ source "fs/Kconfig.binfmt" config FORCE_MAX_ZONEORDER int depends on PPC64 + default "9" if PPC_64K_PAGES default "13" config MATH_EMULATION @@ -569,6 +599,10 @@ config HAVE_ARCH_EARLY_PFN_TO_NID def_bool y depends on NEED_MULTIPLE_NODES +config ARCH_MEMORY_PROBE + def_bool y + depends on MEMORY_HOTPLUG + # Some NUMA nodes have memory ranges that span # other nodes. Even though a pfn is valid and # between a node's start and end pfns, it may not @@ -582,6 +616,16 @@ config NODES_SPAN_OTHER_NODES def_bool y depends on NEED_MULTIPLE_NODES +config PPC_64K_PAGES + bool "64k page size" + depends on PPC64 + help + This option changes the kernel logical page size to 64k. On machines + without processor support for 64k pages, the kernel will simulate + them by loading each individual 4k page on demand transparently, + while on hardware with such support, it will be used to map + normal application pages. + config SCHED_SMT bool "SMT (Hyperthreading) scheduler support" depends on PPC64 && SMP @@ -886,8 +930,21 @@ source "arch/powerpc/platforms/iseries/Kconfig" source "lib/Kconfig" +menu "Instrumentation Support" + depends on EXPERIMENTAL + source "arch/powerpc/oprofile/Kconfig" +config KPROBES + bool "Kprobes (EXPERIMENTAL)" + help + Kprobes allows you to trap at almost any kernel address and + execute a callback function. register_kprobe() establishes + a probepoint and specifies the callback. Kprobes is useful + for kernel debugging, non-intrusive instrumentation and testing. + If in doubt, say "N". +endmenu + source "arch/powerpc/Kconfig.debug" source "security/Kconfig" diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index 0baf64e..30a30bf 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -9,16 +9,6 @@ config DEBUG_STACKOVERFLOW This option will cause messages to be printed if free stack space drops below a certain limit. -config KPROBES - bool "Kprobes" - depends on DEBUG_KERNEL && PPC64 - help - Kprobes allows you to trap at almost any kernel address and - execute a callback function. register_kprobe() establishes - a probepoint and specifies the callback. Kprobes is useful - for kernel debugging, non-intrusive instrumentation and testing. - If in doubt, say "N". - config DEBUG_STACK_USAGE bool "Stack utilization instrumentation" depends on DEBUG_KERNEL && PPC64 diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 2f4cce0..5bc11bd 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -12,9 +12,6 @@ # Rewritten by Cort Dougan and Paul Mackerras # -# This must match PAGE_OFFSET in include/asm-powerpc/page.h. -KERNELLOAD := $(CONFIG_KERNEL_START) - HAS_BIARCH := $(call cc-option-yn, -m32) ifeq ($(CONFIG_PPC64),y) @@ -59,7 +56,7 @@ override LD += -m elf$(SZ)ppc override CC += -m$(SZ) endif -LDFLAGS_vmlinux := -Ttext $(KERNELLOAD) -Bstatic -e $(KERNELLOAD) +LDFLAGS_vmlinux := -Bstatic # The -Iarch/$(ARCH)/include is temporary while we are merging CPPFLAGS += -Iarch/$(ARCH) -Iarch/$(ARCH)/include diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig new file mode 100644 index 0000000..67ffecb --- /dev/null +++ b/arch/powerpc/configs/cell_defconfig @@ -0,0 +1,1024 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc4 +# Thu Oct 20 08:29:10 2005 +# +CONFIG_64BIT=y +CONFIG_MMU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_STOP_MACHINE=y +CONFIG_SYSVIPC_COMPAT=y + +# +# Platform support +# +# CONFIG_PPC_ISERIES is not set +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_PSERIES is not set +CONFIG_PPC_BPA=y +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_MAPLE is not set +CONFIG_PPC=y +CONFIG_PPC64=y +CONFIG_PPC_OF=y +CONFIG_BPA_IIC=y +CONFIG_ALTIVEC=y +CONFIG_KEXEC=y +# CONFIG_U3_DART is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_POWER4_ONLY is not set +# CONFIG_IOMMU_VMERGE is not set +CONFIG_SMP=y +CONFIG_NR_CPUS=4 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_NUMA is not set +CONFIG_SCHED_SMT=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_PREEMPT_BKL=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_GENERIC_HARDIRQS=y +CONFIG_PPC_RTAS=y +CONFIG_RTAS_PROC=y +CONFIG_RTAS_FLASH=y +CONFIG_SECCOMP=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y + +# +# Bus Options +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=y +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +CONFIG_INET_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=y +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +CONFIG_IP_NF_CT_PROTO_SCTP=y +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP6_NF_TARGET_NFQUEUE is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=y +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=131072 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +CONFIG_BLK_DEV_AEC62XX=y +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +CONFIG_BLK_DEV_SIIMAGE=y +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=m +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +CONFIG_SKGE=m +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_SPIDER_NET is not set +# CONFIG_MV643XX_ETH is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINK is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_N_HDLC is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set +# CONFIG_STALDRV is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_WATCHDOG_RTAS=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +CONFIG_EFI_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_KPROBES is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUGGER=y +# CONFIG_XMON is not set +# CONFIG_PPCDBG is not set +CONFIG_IRQSTACKS=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig new file mode 100644 index 0000000..e76854f --- /dev/null +++ b/arch/powerpc/configs/g5_defconfig @@ -0,0 +1,1543 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14 +# Mon Nov 7 13:37:59 2005 +# +CONFIG_PPC64=y +CONFIG_64BIT=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y + +# +# Processor support +# +CONFIG_POWER4_ONLY=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y + +# +# Platform support +# +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_ISERIES is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set +# CONFIG_PPC_PSERIES is not set +CONFIG_PPC_PMAC=y +CONFIG_PPC_PMAC64=y +# CONFIG_PPC_MAPLE is not set +# CONFIG_PPC_CELL is not set +CONFIG_PPC_OF=y +CONFIG_U3_DART=y +CONFIG_MPIC=y +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +CONFIG_GENERIC_TBSYNC=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_PMAC64=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_FORCE_MAX_ZONEORDER=13 +CONFIG_IOMMU_VMERGE=y +# CONFIG_HOTPLUG_CPU is not set +CONFIG_KEXEC=y +CONFIG_IRQ_ALL_CPUS=y +# CONFIG_NUMA is not set +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_SCHED_SMT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_INDIRECT_PCI is not set +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set +CONFIG_KERNEL_START=0xc000000000000000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=y +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +CONFIG_IP_NF_CT_ACCT=y +CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CONNTRACK_EVENTS=y +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_CONNBYTES=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CONNMARK=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_INITRD=y +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_SHARE_IRQ is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +CONFIG_BLK_DEV_IDE_PMAC=y +CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y +CONFIG_BLK_DEV_IDEDMA_PMAC=y +# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +CONFIG_SCSI_SATA=y +# CONFIG_SCSI_SATA_AHCI is not set +CONFIG_SCSI_SATA_SVW=y +# CONFIG_SCSI_ATA_PIIX is not set +# CONFIG_SCSI_SATA_MV is not set +# CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_PDC_ADMA is not set +# CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_SATA_SX4 is not set +# CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIL24 is not set +# CONFIG_SCSI_SATA_SIS is not set +# CONFIG_SCSI_SATA_ULI is not set +# CONFIG_SCSI_SATA_VIA is not set +# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +CONFIG_MD_RAID10=m +CONFIG_MD_RAID5=y +CONFIG_MD_RAID6=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=y +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +# CONFIG_DM_MULTIPATH is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +CONFIG_IEEE1394=y + +# +# Subsystem Options +# +# CONFIG_IEEE1394_VERBOSEDEBUG is not set +CONFIG_IEEE1394_OUI_DB=y +CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y +CONFIG_IEEE1394_CONFIG_ROM_IP1394=y +# CONFIG_IEEE1394_EXPORT_FULL_API is not set + +# +# Device Drivers +# +# CONFIG_IEEE1394_PCILYNX is not set +CONFIG_IEEE1394_OHCI1394=y + +# +# Protocol Drivers +# +CONFIG_IEEE1394_VIDEO1394=m +CONFIG_IEEE1394_SBP2=m +# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set +CONFIG_IEEE1394_ETH1394=m +CONFIG_IEEE1394_DV1394=m +CONFIG_IEEE1394_RAWIO=y +# CONFIG_IEEE1394_CMP is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +CONFIG_ADB_PMU=y +CONFIG_PMAC_SMU=y +CONFIG_THERM_PM72=y +CONFIG_WINDFARM=y +CONFIG_WINDFARM_PM81=y +CONFIG_WINDFARM_PM91=y + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_BONDING=m +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +CONFIG_SUNGEM=y +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set +# CONFIG_FEC_8XX is not set + +# +# Ethernet (1000 Mbit) +# +CONFIG_ACENIC=y +CONFIG_ACENIC_OMIT_TIGON_I=y +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +CONFIG_TIGON3=m +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +CONFIG_TR=y +CONFIG_IBMOL=y +# CONFIG_3C359 is not set +# CONFIG_TMS380TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPPOE=m +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +CONFIG_INPUT_JOYDEV=m +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +# CONFIG_MOUSE_PS2 is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_PMACZILOG is not set +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +CONFIG_AGP=m +CONFIG_AGP_UNINORTH=m +# CONFIG_DRM is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_KEYWEST=y +CONFIG_I2C_PMAC_SMU=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +CONFIG_FB_OF=y +# CONFIG_FB_CONTROL is not set +# CONFIG_FB_PLATINUM is not set +# CONFIG_FB_VALKYRIE is not set +# CONFIG_FB_CT65550 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +CONFIG_FB_NVIDIA=y +CONFIG_FB_NVIDIA_I2C=y +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON_OLD is not set +CONFIG_FB_RADEON=y +CONFIG_FB_RADEON_I2C=y +# CONFIG_FB_RADEON_DEBUG is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=m +CONFIG_BACKLIGHT_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=m +CONFIG_LCD_DEVICE=y + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_GENERIC_DRIVER=y + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# ALSA PowerMac devices +# +CONFIG_SND_POWERMAC=m +CONFIG_SND_POWERMAC_AUTO_DRC=y + +# +# USB devices +# +CONFIG_SND_USB_AUDIO=m +# CONFIG_SND_USB_USX2Y is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=y + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DATAFAB=y +CONFIG_USB_STORAGE_FREECOM=y +CONFIG_USB_STORAGE_ISD200=y +CONFIG_USB_STORAGE_DPCM=y +# CONFIG_USB_STORAGE_USBAT is not set +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +CONFIG_USB_STORAGE_JUMPSHOT=y +# CONFIG_USB_STORAGE_ONETOUCH is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +CONFIG_USB_HIDINPUT=y +CONFIG_HID_FF=y +CONFIG_HID_PID=y +CONFIG_LOGITECH_FF=y +CONFIG_THRUSTMASTER_FF=y +CONFIG_USB_HIDDEV=y +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +# CONFIG_USB_NET_AX8817X is not set +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_GL620A is not set +# CONFIG_USB_NET_NET1080 is not set +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +# CONFIG_USB_NET_ZAURUS is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set +CONFIG_USB_SERIAL_SAFE=m +CONFIG_USB_SERIAL_SAFE_PADDED=y +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y +# CONFIG_XFS_QUOTA is not set +CONFIG_XFS_SECURITY=y +CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=m +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +CONFIG_NLS_CODEPAGE_1250=y +CONFIG_NLS_CODEPAGE_1251=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_KPROBES is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUGGER is not set +CONFIG_IRQSTACKS=y +CONFIG_BOOTX_TEXT=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig new file mode 100644 index 0000000..62e92c7 --- /dev/null +++ b/arch/powerpc/configs/iseries_defconfig @@ -0,0 +1,998 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc4 +# Thu Oct 20 08:30:56 2005 +# +CONFIG_64BIT=y +CONFIG_MMU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y +CONFIG_SYSVIPC_COMPAT=y + +# +# Platform support +# +CONFIG_PPC_ISERIES=y +# CONFIG_PPC_MULTIPLATFORM is not set +CONFIG_PPC=y +CONFIG_PPC64=y +CONFIG_IBMVIO=y +# CONFIG_POWER4_ONLY is not set +CONFIG_IOMMU_VMERGE=y +CONFIG_SMP=y +CONFIG_NR_CPUS=32 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_NUMA is not set +# CONFIG_SCHED_SMT is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_GENERIC_HARDIRQS=y +CONFIG_LPARCFG=y +CONFIG_SECCOMP=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_ISA_DMA_API=y + +# +# Bus Options +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=y +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +CONFIG_IP_NF_CT_ACCT=y +CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CONNTRACK_EVENTS=y +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_CONNBYTES=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CONNMARK=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +CONFIG_SCSI_FC_ATTRS=y +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +CONFIG_SCSI_IBMVSCSI=m +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +CONFIG_MD_RAID10=m +CONFIG_MD_RAID5=y +CONFIG_MD_RAID6=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=y +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +# CONFIG_DM_MULTIPATH is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_BONDING=m +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +CONFIG_PCNET32=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +CONFIG_ACENIC=m +# CONFIG_ACENIC_OMIT_TIGON_I is not set +# CONFIG_DL2K is not set +CONFIG_E1000=m +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +CONFIG_TR=y +CONFIG_IBMOL=y +# CONFIG_3C359 is not set +# CONFIG_TMS380TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +CONFIG_ISERIES_VETH=y +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPPOE=m +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +CONFIG_NETCONSOLE=y +CONFIG_NETPOLL=y +CONFIG_NETPOLL_RX=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=m +CONFIG_SERIAL_ICOM=m +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +CONFIG_JFS_FS=m +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y +# CONFIG_XFS_QUOTA is not set +CONFIG_XFS_SECURITY=y +CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=m +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +CONFIG_RPCSEC_GSS_SPKM3=m +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# iSeries device drivers +# +CONFIG_VIOCONS=y +CONFIG_VIODASD=y +CONFIG_VIOCD=m +CONFIG_VIOTAPE=m +CONFIG_VIOPATH=y + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_STACKOVERFLOW=y +# CONFIG_KPROBES is not set +CONFIG_DEBUG_STACK_USAGE=y +# CONFIG_DEBUGGER is not set +# CONFIG_PPCDBG is not set +CONFIG_IRQSTACKS=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig new file mode 100644 index 0000000..7b480f3 --- /dev/null +++ b/arch/powerpc/configs/maple_defconfig @@ -0,0 +1,1062 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc4 +# Thu Oct 20 08:31:24 2005 +# +CONFIG_64BIT=y +CONFIG_MMU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y +CONFIG_SYSVIPC_COMPAT=y + +# +# Platform support +# +# CONFIG_PPC_ISERIES is not set +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_PSERIES is not set +# CONFIG_PPC_BPA is not set +# CONFIG_PPC_PMAC is not set +CONFIG_PPC_MAPLE=y +CONFIG_PPC=y +CONFIG_PPC64=y +CONFIG_PPC_OF=y +CONFIG_MPIC=y +# CONFIG_ALTIVEC is not set +CONFIG_KEXEC=y +CONFIG_U3_DART=y +CONFIG_MPIC_BROKEN_U3=y +CONFIG_BOOTX_TEXT=y +CONFIG_POWER4_ONLY=y +CONFIG_IOMMU_VMERGE=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_NUMA is not set +# CONFIG_SCHED_SMT is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_GENERIC_HARDIRQS=y +CONFIG_SECCOMP=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y + +# +# Bus Options +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +CONFIG_IDE_TASK_IOCTL=y + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +CONFIG_BLK_DEV_AMD74XX=y +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +CONFIG_AMD8111_ETH=y +# CONFIG_AMD8111E_NAPI is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +CONFIG_I2C_AMD8111=y +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_SPLIT_ISO=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_BLUETOOTH_TTY is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +CONFIG_USB_PEGASUS=y +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=y +# CONFIG_USB_SERIAL_CONSOLE is not set +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +CONFIG_USB_SERIAL_KEYSPAN=y +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +CONFIG_USB_SERIAL_TI=m +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OMNINET is not set +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf-8" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +CONFIG_DEBUG_SLAB=y +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_STACKOVERFLOW=y +# CONFIG_KPROBES is not set +CONFIG_DEBUG_STACK_USAGE=y +CONFIG_DEBUGGER=y +CONFIG_XMON=y +CONFIG_XMON_DEFAULT=y +# CONFIG_PPCDBG is not set +# CONFIG_IRQSTACKS is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig new file mode 100644 index 0000000..9f09dff --- /dev/null +++ b/arch/powerpc/configs/pseries_defconfig @@ -0,0 +1,1371 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc4 +# Thu Oct 20 08:32:17 2005 +# +CONFIG_64BIT=y +CONFIG_MMU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_CPUSETS=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y +CONFIG_SYSVIPC_COMPAT=y + +# +# Platform support +# +# CONFIG_PPC_ISERIES is not set +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_PPC_PSERIES=y +# CONFIG_PPC_BPA is not set +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_MAPLE is not set +CONFIG_PPC=y +CONFIG_PPC64=y +CONFIG_PPC_OF=y +CONFIG_XICS=y +CONFIG_MPIC=y +CONFIG_ALTIVEC=y +CONFIG_PPC_SPLPAR=y +CONFIG_KEXEC=y +CONFIG_IBMVIO=y +# CONFIG_U3_DART is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_POWER4_ONLY is not set +CONFIG_IOMMU_VMERGE=y +CONFIG_SMP=y +CONFIG_NR_CPUS=128 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y +CONFIG_NODES_SPAN_OTHER_NODES=y +CONFIG_NUMA=y +CONFIG_SCHED_SMT=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_EEH=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_PPC_RTAS=y +CONFIG_RTAS_PROC=y +CONFIG_RTAS_FLASH=m +CONFIG_SCANLOG=m +CONFIG_LPARCFG=y +CONFIG_SECCOMP=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_HOTPLUG_CPU=y +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y + +# +# Bus Options +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +CONFIG_HOTPLUG_PCI=m +# CONFIG_HOTPLUG_PCI_FAKE is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set +CONFIG_HOTPLUG_PCI_RPA=m +CONFIG_HOTPLUG_PCI_RPA_DLPAR=m + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=y +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_NETLINK=y +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +CONFIG_IP_NF_CT_ACCT=y +CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CONNTRACK_EVENTS=y +CONFIG_IP_NF_CONNTRACK_NETLINK=m +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_CONNBYTES=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CONNMARK=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +CONFIG_PARPORT=m +CONFIG_PARPORT_PC=m +# CONFIG_PARPORT_SERIAL is not set +# CONFIG_PARPORT_PC_FIFO is not set +# CONFIG_PARPORT_PC_SUPERIO is not set +# CONFIG_PARPORT_GSC is not set +# CONFIG_PARPORT_1284 is not set + +# +# Plug and Play support +# + +# +# Block devices +# +CONFIG_BLK_DEV_FD=m +# CONFIG_PARIDE is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_SL82C105=y +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +CONFIG_BLK_DEV_AMD74XX=y +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +CONFIG_SCSI_FC_ATTRS=y +CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +CONFIG_SCSI_IBMVSCSI=y +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_PPA is not set +# CONFIG_SCSI_IMM is not set +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +CONFIG_SCSI_IPR=y +CONFIG_SCSI_IPR_TRACE=y +CONFIG_SCSI_IPR_DUMP=y +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +CONFIG_SCSI_QLA21XX=m +CONFIG_SCSI_QLA22XX=m +CONFIG_SCSI_QLA2300=m +CONFIG_SCSI_QLA2322=m +CONFIG_SCSI_QLA6312=m +CONFIG_SCSI_QLA24XX=m +CONFIG_SCSI_LPFC=m +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +CONFIG_MD_RAID10=m +CONFIG_MD_RAID5=y +CONFIG_MD_RAID6=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=y +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_BONDING=m +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +CONFIG_NET_VENDOR_3COM=y +CONFIG_VORTEX=y +# CONFIG_TYPHOON is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_IBMVETH=y +CONFIG_NET_PCI=y +CONFIG_PCNET32=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_NET_POCKET is not set + +# +# Ethernet (1000 Mbit) +# +CONFIG_ACENIC=y +CONFIG_ACENIC_OMIT_TIGON_I=y +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_TIGON3=y +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +CONFIG_IXGB=m +# CONFIG_IXGB_NAPI is not set +CONFIG_S2IO=m +# CONFIG_S2IO_NAPI is not set +# CONFIG_2BUFF_MODE is not set + +# +# Token Ring devices +# +CONFIG_TR=y +CONFIG_IBMOL=y +# CONFIG_3C359 is not set +# CONFIG_TMS380TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PLIP is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPPOE=m +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +CONFIG_NETCONSOLE=y +CONFIG_NETPOLL=y +CONFIG_NETPOLL_RX=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_PCSPKR=m +# CONFIG_INPUT_UINPUT is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_ICOM=m +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_PRINTER is not set +# CONFIG_PPDEV is not set +# CONFIG_TIPAR is not set +CONFIG_HVC_CONSOLE=y +CONFIG_HVCS=m + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=1024 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +CONFIG_FB_MACMODES=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +CONFIG_FB_OF=y +# CONFIG_FB_CT65550 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +CONFIG_FB_MATROX=y +CONFIG_FB_MATROX_MILLENIUM=y +CONFIG_FB_MATROX_MYSTIQUE=y +CONFIG_FB_MATROX_G=y +# CONFIG_FB_MATROX_I2C is not set +CONFIG_FB_MATROX_MULTIHEAD=y +# CONFIG_FB_RADEON_OLD is not set +CONFIG_FB_RADEON=y +CONFIG_FB_RADEON_I2C=y +# CONFIG_FB_RADEON_DEBUG is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=m +CONFIG_BACKLIGHT_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=m +CONFIG_LCD_DEVICE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_BLUETOOTH_TTY is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +CONFIG_USB_HIDDEV=y +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_USS720 is not set + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +CONFIG_INFINIBAND=m +# CONFIG_INFINIBAND_USER_MAD is not set +# CONFIG_INFINIBAND_USER_ACCESS is not set +CONFIG_INFINIBAND_MTHCA=m +# CONFIG_INFINIBAND_MTHCA_DEBUG is not set +CONFIG_INFINIBAND_IPOIB=m +# CONFIG_INFINIBAND_IPOIB_DEBUG is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +CONFIG_JFS_FS=m +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y +# CONFIG_XFS_QUOTA is not set +CONFIG_XFS_SECURITY=y +CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=m +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +CONFIG_RPCSEC_GSS_SPKM3=m +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_STACKOVERFLOW=y +# CONFIG_KPROBES is not set +CONFIG_DEBUG_STACK_USAGE=y +CONFIG_DEBUGGER=y +CONFIG_XMON=y +CONFIG_XMON_DEFAULT=y +# CONFIG_PPCDBG is not set +CONFIG_IRQSTACKS=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 572d4f5..c04bbd3 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -4,6 +4,7 @@ ifeq ($(CONFIG_PPC64),y) EXTRA_CFLAGS += -mno-minimal-toc +CFLAGS_ioctl32.o += -Ifs/ endif ifeq ($(CONFIG_PPC32),y) CFLAGS_prom_init.o += -fPIC @@ -11,14 +12,23 @@ CFLAGS_btext.o += -fPIC endif obj-y := semaphore.o cputable.o ptrace.o syscalls.o \ - signal_32.o pmc.o + irq.o signal_32.o pmc.o obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ - ptrace32.o systbl.o + signal_64.o ptrace32.o systbl.o \ + paca.o ioctl32.o cpu_setup_power4.o \ + firmware.o sysfs.o obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o obj-$(CONFIG_POWER4) += idle_power4.o obj-$(CONFIG_PPC_OF) += of_device.o -obj-$(CONFIG_PPC_RTAS) += rtas.o +procfs-$(CONFIG_PPC64) := proc_ppc64.o +obj-$(CONFIG_PROC_FS) += $(procfs-y) +rtaspci-$(CONFIG_PPC64) := rtas_pci.o +obj-$(CONFIG_PPC_RTAS) += rtas.o $(rtaspci-y) +obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o +obj-$(CONFIG_RTAS_PROC) += rtas-proc.o +obj-$(CONFIG_LPARCFG) += lparcfg.o obj-$(CONFIG_IBMVIO) += vio.o +obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o ifeq ($(CONFIG_PPC_MERGE),y) @@ -38,6 +48,7 @@ obj-$(CONFIG_PPC_OF) += prom_init.o obj-$(CONFIG_MODULES) += ppc_ksyms.o obj-$(CONFIG_BOOTX_TEXT) += btext.o obj-$(CONFIG_6xx) += idle_6xx.o +obj-$(CONFIG_SMP) += smp.o ifeq ($(CONFIG_PPC_ISERIES),y) $(obj)/head_64.o: $(obj)/lparmap.s @@ -46,8 +57,9 @@ endif else # stuff used from here for ARCH=ppc or ARCH=ppc64 +smpobj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_PPC64) += traps.o process.o init_task.o time.o \ - setup-common.o + setup-common.o $(smpobj-y) endif diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 330cd78..8793102 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -40,7 +40,7 @@ #ifdef CONFIG_PPC64 #include <asm/paca.h> #include <asm/lppaca.h> -#include <asm/iSeries/HvLpEvent.h> +#include <asm/iseries/hv_lp_event.h> #include <asm/cache.h> #include <asm/systemcfg.h> #include <asm/compat.h> @@ -106,7 +106,6 @@ int main(void) DEFINE(ICACHEL1LINESIZE, offsetof(struct ppc64_caches, iline_size)); DEFINE(ICACHEL1LOGLINESIZE, offsetof(struct ppc64_caches, log_iline_size)); DEFINE(ICACHEL1LINESPERPAGE, offsetof(struct ppc64_caches, ilines_per_page)); - DEFINE(PLATFORM, offsetof(struct systemcfg, platform)); DEFINE(PLATFORM_LPAR, PLATFORM_LPAR); /* paca */ @@ -125,6 +124,9 @@ int main(void) DEFINE(PACASLBCACHE, offsetof(struct paca_struct, slb_cache)); DEFINE(PACASLBCACHEPTR, offsetof(struct paca_struct, slb_cache_ptr)); DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id)); +#ifdef CONFIG_PPC_64K_PAGES + DEFINE(PACAPGDIR, offsetof(struct paca_struct, pgdir)); +#endif #ifdef CONFIG_HUGETLB_PAGE DEFINE(PACALOWHTLBAREAS, offsetof(struct paca_struct, context.low_htlb_areas)); DEFINE(PACAHIGHHTLBAREAS, offsetof(struct paca_struct, context.high_htlb_areas)); diff --git a/arch/ppc64/kernel/cpu_setup_power4.S b/arch/powerpc/kernel/cpu_setup_power4.S index 1fb673c5..cca942f 100644 --- a/arch/ppc64/kernel/cpu_setup_power4.S +++ b/arch/powerpc/kernel/cpu_setup_power4.S @@ -114,11 +114,11 @@ _GLOBAL(__setup_cpu_ppc970) .data .balign L1_CACHE_BYTES,0 -cpu_state_storage: +cpu_state_storage: .space CS_SIZE .balign L1_CACHE_BYTES,0 .text - + /* Called in normal context to backup CPU 0 state. This * does not include cache settings. This function is also * called for machine sleep. This does not include the MMU @@ -151,7 +151,7 @@ _GLOBAL(__save_cpu_setup) std r3,CS_HID4(r5) mfspr r3,SPRN_HID5 std r3,CS_HID5(r5) - + 2: mtcr r7 blr @@ -213,7 +213,7 @@ _GLOBAL(__restore_cpu_setup) mtspr SPRN_HID1,r3 sync isync - + /* Restore HID4 */ ld r3,CS_HID4(r5) sync diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index b91345f..1d85ced 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -52,6 +52,9 @@ extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec); #define COMMON_USER (PPC_FEATURE_32 | PPC_FEATURE_HAS_FPU | \ PPC_FEATURE_HAS_MMU) #define COMMON_USER_PPC64 (COMMON_USER | PPC_FEATURE_64) +#define COMMON_USER_POWER4 (COMMON_USER_PPC64 | PPC_FEATURE_POWER4) +#define COMMON_USER_POWER5 (COMMON_USER_PPC64 | PPC_FEATURE_POWER5) +#define COMMON_USER_POWER5_PLUS (COMMON_USER_PPC64 | PPC_FEATURE_POWER5_PLUS) /* We only set the spe features if the kernel was compiled with @@ -160,7 +163,7 @@ struct cpu_spec cpu_specs[] = { .pvr_value = 0x00350000, .cpu_name = "POWER4 (gp)", .cpu_features = CPU_FTRS_POWER4, - .cpu_user_features = COMMON_USER_PPC64, + .cpu_user_features = COMMON_USER_POWER4, .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 8, @@ -175,7 +178,7 @@ struct cpu_spec cpu_specs[] = { .pvr_value = 0x00380000, .cpu_name = "POWER4+ (gq)", .cpu_features = CPU_FTRS_POWER4, - .cpu_user_features = COMMON_USER_PPC64, + .cpu_user_features = COMMON_USER_POWER4, .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 8, @@ -190,7 +193,7 @@ struct cpu_spec cpu_specs[] = { .pvr_value = 0x00390000, .cpu_name = "PPC970", .cpu_features = CPU_FTRS_PPC970, - .cpu_user_features = COMMON_USER_PPC64 | + .cpu_user_features = COMMON_USER_POWER4 | PPC_FEATURE_HAS_ALTIVEC_COMP, .icache_bsize = 128, .dcache_bsize = 128, @@ -212,7 +215,7 @@ struct cpu_spec cpu_specs[] = { #else .cpu_features = CPU_FTRS_PPC970, #endif - .cpu_user_features = COMMON_USER_PPC64 | + .cpu_user_features = COMMON_USER_POWER4 | PPC_FEATURE_HAS_ALTIVEC_COMP, .icache_bsize = 128, .dcache_bsize = 128, @@ -230,7 +233,7 @@ struct cpu_spec cpu_specs[] = { .pvr_value = 0x00440000, .cpu_name = "PPC970MP", .cpu_features = CPU_FTRS_PPC970, - .cpu_user_features = COMMON_USER_PPC64 | + .cpu_user_features = COMMON_USER_POWER4 | PPC_FEATURE_HAS_ALTIVEC_COMP, .icache_bsize = 128, .dcache_bsize = 128, @@ -240,12 +243,12 @@ struct cpu_spec cpu_specs[] = { .oprofile_model = &op_model_power4, #endif }, - { /* Power5 */ + { /* Power5 GR */ .pvr_mask = 0xffff0000, .pvr_value = 0x003a0000, .cpu_name = "POWER5 (gr)", .cpu_features = CPU_FTRS_POWER5, - .cpu_user_features = COMMON_USER_PPC64, + .cpu_user_features = COMMON_USER_POWER5, .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 6, @@ -255,12 +258,12 @@ struct cpu_spec cpu_specs[] = { .oprofile_model = &op_model_power4, #endif }, - { /* Power5 */ + { /* Power5 GS */ .pvr_mask = 0xffff0000, .pvr_value = 0x003b0000, .cpu_name = "POWER5 (gs)", .cpu_features = CPU_FTRS_POWER5, - .cpu_user_features = COMMON_USER_PPC64, + .cpu_user_features = COMMON_USER_POWER5_PLUS, .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 6, @@ -276,7 +279,7 @@ struct cpu_spec cpu_specs[] = { .cpu_name = "Cell Broadband Engine", .cpu_features = CPU_FTRS_CELL, .cpu_user_features = COMMON_USER_PPC64 | - PPC_FEATURE_HAS_ALTIVEC_COMP, + PPC_FEATURE_CELL | PPC_FEATURE_HAS_ALTIVEC_COMP, .icache_bsize = 128, .dcache_bsize = 128, .cpu_setup = __setup_cpu_be, @@ -929,6 +932,16 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, }, + { /* 440SPe Rev. A */ + .pvr_mask = 0xff000fff, + .pvr_value = 0x53000890, + .cpu_name = "440SPe Rev. A", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB, + .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU, + .icache_bsize = 32, + .dcache_bsize = 32, + }, #endif /* CONFIG_44x */ #ifdef CONFIG_FSL_BOOKE { /* e200z5 */ diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 984a106..2d22bf0 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -279,7 +279,7 @@ _GLOBAL(ppc32_rt_sigsuspend) bne syscall_exit /* If sigsuspend() returns zero, we are going into a signal handler. We may need to call audit_syscall_exit() to mark the exit from sigsuspend() */ -#ifdef CONFIG_AUDIT +#ifdef CONFIG_AUDITSYSCALL ld r3,PACACURRENT(r13) ld r4,AUDITCONTEXT(r3) cmpdi 0,r4,0 diff --git a/arch/ppc64/kernel/firmware.c b/arch/powerpc/kernel/firmware.c index d8432c0..65eae75 100644 --- a/arch/ppc64/kernel/firmware.c +++ b/arch/powerpc/kernel/firmware.c @@ -1,6 +1,4 @@ /* - * arch/ppc64/kernel/firmware.c - * * Extracted from cputable.c * * Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org) diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S index 4d6001f..b780b42 100644 --- a/arch/powerpc/kernel/fpu.S +++ b/arch/powerpc/kernel/fpu.S @@ -41,20 +41,20 @@ _GLOBAL(load_up_fpu) #ifndef CONFIG_SMP LOADBASE(r3, last_task_used_math) toreal(r3) - LDL r4,OFF(last_task_used_math)(r3) - CMPI 0,r4,0 + PPC_LL r4,OFF(last_task_used_math)(r3) + PPC_LCMPI 0,r4,0 beq 1f toreal(r4) addi r4,r4,THREAD /* want last_task_used_math->thread */ SAVE_32FPRS(0, r4) mffs fr0 stfd fr0,THREAD_FPSCR(r4) - LDL r5,PT_REGS(r4) + PPC_LL r5,PT_REGS(r4) toreal(r5) - LDL r4,_MSR-STACK_FRAME_OVERHEAD(r5) + PPC_LL r4,_MSR-STACK_FRAME_OVERHEAD(r5) li r10,MSR_FP|MSR_FE0|MSR_FE1 andc r4,r4,r10 /* disable FP for previous task */ - STL r4,_MSR-STACK_FRAME_OVERHEAD(r5) + PPC_STL r4,_MSR-STACK_FRAME_OVERHEAD(r5) 1: #endif /* CONFIG_SMP */ /* enable use of FP after return */ @@ -77,7 +77,7 @@ _GLOBAL(load_up_fpu) #ifndef CONFIG_SMP subi r4,r5,THREAD fromreal(r4) - STL r4,OFF(last_task_used_math)(r3) + PPC_STL r4,OFF(last_task_used_math)(r3) #endif /* CONFIG_SMP */ /* restore registers and return */ /* we haven't used ctr or xer or lr */ @@ -97,24 +97,24 @@ _GLOBAL(giveup_fpu) MTMSRD(r5) /* enable use of fpu now */ SYNC_601 isync - CMPI 0,r3,0 + PPC_LCMPI 0,r3,0 beqlr- /* if no previous owner, done */ addi r3,r3,THREAD /* want THREAD of task */ - LDL r5,PT_REGS(r3) - CMPI 0,r5,0 + PPC_LL r5,PT_REGS(r3) + PPC_LCMPI 0,r5,0 SAVE_32FPRS(0, r3) mffs fr0 stfd fr0,THREAD_FPSCR(r3) beq 1f - LDL r4,_MSR-STACK_FRAME_OVERHEAD(r5) + PPC_LL r4,_MSR-STACK_FRAME_OVERHEAD(r5) li r3,MSR_FP|MSR_FE0|MSR_FE1 andc r4,r4,r3 /* disable FP for previous task */ - STL r4,_MSR-STACK_FRAME_OVERHEAD(r5) + PPC_STL r4,_MSR-STACK_FRAME_OVERHEAD(r5) 1: #ifndef CONFIG_SMP li r5,0 LOADBASE(r4,last_task_used_math) - STL r5,OFF(last_task_used_math)(r4) + PPC_STL r5,OFF(last_task_used_math)(r4) #endif /* CONFIG_SMP */ blr diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 147215a..8a8bf79 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -28,14 +28,13 @@ #include <asm/reg.h> #include <asm/page.h> #include <asm/mmu.h> -#include <asm/systemcfg.h> #include <asm/ppc_asm.h> #include <asm/asm-offsets.h> #include <asm/bug.h> #include <asm/cputable.h> #include <asm/setup.h> #include <asm/hvcall.h> -#include <asm/iSeries/LparMap.h> +#include <asm/iseries/lpar_map.h> #include <asm/thread_info.h> #ifdef CONFIG_PPC_ISERIES @@ -195,11 +194,11 @@ exception_marker: #define EX_R12 24 #define EX_R13 32 #define EX_SRR0 40 -#define EX_R3 40 /* SLB miss saves R3, but not SRR0 */ #define EX_DAR 48 -#define EX_LR 48 /* SLB miss saves LR, but not DAR */ #define EX_DSISR 56 #define EX_CCR 60 +#define EX_R3 64 +#define EX_LR 72 #define EXCEPTION_PROLOG_PSERIES(area, label) \ mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ @@ -419,17 +418,22 @@ data_access_slb_pSeries: mtspr SPRN_SPRG1,r13 RUNLATCH_ON(r13) mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ + std r3,PACA_EXSLB+EX_R3(r13) + mfspr r3,SPRN_DAR std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */ + mfcr r9 +#ifdef __DISABLED__ + /* Keep that around for when we re-implement dynamic VSIDs */ + cmpdi r3,0 + bge slb_miss_user_pseries +#endif /* __DISABLED__ */ std r10,PACA_EXSLB+EX_R10(r13) std r11,PACA_EXSLB+EX_R11(r13) std r12,PACA_EXSLB+EX_R12(r13) - std r3,PACA_EXSLB+EX_R3(r13) - mfspr r9,SPRN_SPRG1 - std r9,PACA_EXSLB+EX_R13(r13) - mfcr r9 + mfspr r10,SPRN_SPRG1 + std r10,PACA_EXSLB+EX_R13(r13) mfspr r12,SPRN_SRR1 /* and SRR1 */ - mfspr r3,SPRN_DAR - b .do_slb_miss /* Rel. branch works in real mode */ + b .slb_miss_realmode /* Rel. branch works in real mode */ STD_EXCEPTION_PSERIES(0x400, instruction_access) @@ -440,17 +444,22 @@ instruction_access_slb_pSeries: mtspr SPRN_SPRG1,r13 RUNLATCH_ON(r13) mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ + std r3,PACA_EXSLB+EX_R3(r13) + mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */ std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */ + mfcr r9 +#ifdef __DISABLED__ + /* Keep that around for when we re-implement dynamic VSIDs */ + cmpdi r3,0 + bge slb_miss_user_pseries +#endif /* __DISABLED__ */ std r10,PACA_EXSLB+EX_R10(r13) std r11,PACA_EXSLB+EX_R11(r13) std r12,PACA_EXSLB+EX_R12(r13) - std r3,PACA_EXSLB+EX_R3(r13) - mfspr r9,SPRN_SPRG1 - std r9,PACA_EXSLB+EX_R13(r13) - mfcr r9 + mfspr r10,SPRN_SPRG1 + std r10,PACA_EXSLB+EX_R13(r13) mfspr r12,SPRN_SRR1 /* and SRR1 */ - mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */ - b .do_slb_miss /* Rel. branch works in real mode */ + b .slb_miss_realmode /* Rel. branch works in real mode */ STD_EXCEPTION_PSERIES(0x500, hardware_interrupt) STD_EXCEPTION_PSERIES(0x600, alignment) @@ -509,6 +518,38 @@ _GLOBAL(do_stab_bolted_pSeries) EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted) /* + * We have some room here we use that to put + * the peries slb miss user trampoline code so it's reasonably + * away from slb_miss_user_common to avoid problems with rfid + * + * This is used for when the SLB miss handler has to go virtual, + * which doesn't happen for now anymore but will once we re-implement + * dynamic VSIDs for shared page tables + */ +#ifdef __DISABLED__ +slb_miss_user_pseries: + std r10,PACA_EXGEN+EX_R10(r13) + std r11,PACA_EXGEN+EX_R11(r13) + std r12,PACA_EXGEN+EX_R12(r13) + mfspr r10,SPRG1 + ld r11,PACA_EXSLB+EX_R9(r13) + ld r12,PACA_EXSLB+EX_R3(r13) + std r10,PACA_EXGEN+EX_R13(r13) + std r11,PACA_EXGEN+EX_R9(r13) + std r12,PACA_EXGEN+EX_R3(r13) + clrrdi r12,r13,32 + mfmsr r10 + mfspr r11,SRR0 /* save SRR0 */ + ori r12,r12,slb_miss_user_common@l /* virt addr of handler */ + ori r10,r10,MSR_IR|MSR_DR|MSR_RI + mtspr SRR0,r12 + mfspr r12,SRR1 /* and SRR1 */ + mtspr SRR1,r10 + rfid + b . /* prevent spec. execution */ +#endif /* __DISABLED__ */ + +/* * Vectors for the FWNMI option. Share common code. */ .globl system_reset_fwnmi @@ -559,22 +600,59 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB) .globl data_access_slb_iSeries data_access_slb_iSeries: mtspr SPRN_SPRG1,r13 /* save r13 */ - EXCEPTION_PROLOG_ISERIES_1(PACA_EXSLB) + mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ std r3,PACA_EXSLB+EX_R3(r13) - ld r12,PACALPPACA+LPPACASRR1(r13) mfspr r3,SPRN_DAR - b .do_slb_miss + std r9,PACA_EXSLB+EX_R9(r13) + mfcr r9 +#ifdef __DISABLED__ + cmpdi r3,0 + bge slb_miss_user_iseries +#endif + std r10,PACA_EXSLB+EX_R10(r13) + std r11,PACA_EXSLB+EX_R11(r13) + std r12,PACA_EXSLB+EX_R12(r13) + mfspr r10,SPRN_SPRG1 + std r10,PACA_EXSLB+EX_R13(r13) + ld r12,PACALPPACA+LPPACASRR1(r13); + b .slb_miss_realmode STD_EXCEPTION_ISERIES(0x400, instruction_access, PACA_EXGEN) .globl instruction_access_slb_iSeries instruction_access_slb_iSeries: mtspr SPRN_SPRG1,r13 /* save r13 */ - EXCEPTION_PROLOG_ISERIES_1(PACA_EXSLB) + mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ std r3,PACA_EXSLB+EX_R3(r13) - ld r12,PACALPPACA+LPPACASRR1(r13) - ld r3,PACALPPACA+LPPACASRR0(r13) - b .do_slb_miss + ld r3,PACALPPACA+LPPACASRR0(r13) /* get SRR0 value */ + std r9,PACA_EXSLB+EX_R9(r13) + mfcr r9 +#ifdef __DISABLED__ + cmpdi r3,0 + bge .slb_miss_user_iseries +#endif + std r10,PACA_EXSLB+EX_R10(r13) + std r11,PACA_EXSLB+EX_R11(r13) + std r12,PACA_EXSLB+EX_R12(r13) + mfspr r10,SPRN_SPRG1 + std r10,PACA_EXSLB+EX_R13(r13) + ld r12,PACALPPACA+LPPACASRR1(r13); + b .slb_miss_realmode + +#ifdef __DISABLED__ +slb_miss_user_iseries: + std r10,PACA_EXGEN+EX_R10(r13) + std r11,PACA_EXGEN+EX_R11(r13) + std r12,PACA_EXGEN+EX_R12(r13) + mfspr r10,SPRG1 + ld r11,PACA_EXSLB+EX_R9(r13) + ld r12,PACA_EXSLB+EX_R3(r13) + std r10,PACA_EXGEN+EX_R13(r13) + std r11,PACA_EXGEN+EX_R9(r13) + std r12,PACA_EXGEN+EX_R3(r13) + EXCEPTION_PROLOG_ISERIES_2 + b slb_miss_user_common +#endif MASKABLE_EXCEPTION_ISERIES(0x500, hardware_interrupt) STD_EXCEPTION_ISERIES(0x600, alignment, PACA_EXGEN) @@ -809,6 +887,126 @@ instruction_access_common: li r5,0x400 b .do_hash_page /* Try to handle as hpte fault */ +/* + * Here is the common SLB miss user that is used when going to virtual + * mode for SLB misses, that is currently not used + */ +#ifdef __DISABLED__ + .align 7 + .globl slb_miss_user_common +slb_miss_user_common: + mflr r10 + std r3,PACA_EXGEN+EX_DAR(r13) + stw r9,PACA_EXGEN+EX_CCR(r13) + std r10,PACA_EXGEN+EX_LR(r13) + std r11,PACA_EXGEN+EX_SRR0(r13) + bl .slb_allocate_user + + ld r10,PACA_EXGEN+EX_LR(r13) + ld r3,PACA_EXGEN+EX_R3(r13) + lwz r9,PACA_EXGEN+EX_CCR(r13) + ld r11,PACA_EXGEN+EX_SRR0(r13) + mtlr r10 + beq- slb_miss_fault + + andi. r10,r12,MSR_RI /* check for unrecoverable exception */ + beq- unrecov_user_slb + mfmsr r10 + +.machine push +.machine "power4" + mtcrf 0x80,r9 +.machine pop + + clrrdi r10,r10,2 /* clear RI before setting SRR0/1 */ + mtmsrd r10,1 + + mtspr SRR0,r11 + mtspr SRR1,r12 + + ld r9,PACA_EXGEN+EX_R9(r13) + ld r10,PACA_EXGEN+EX_R10(r13) + ld r11,PACA_EXGEN+EX_R11(r13) + ld r12,PACA_EXGEN+EX_R12(r13) + ld r13,PACA_EXGEN+EX_R13(r13) + rfid + b . + +slb_miss_fault: + EXCEPTION_PROLOG_COMMON(0x380, PACA_EXGEN) + ld r4,PACA_EXGEN+EX_DAR(r13) + li r5,0 + std r4,_DAR(r1) + std r5,_DSISR(r1) + b .handle_page_fault + +unrecov_user_slb: + EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN) + DISABLE_INTS + bl .save_nvgprs +1: addi r3,r1,STACK_FRAME_OVERHEAD + bl .unrecoverable_exception + b 1b + +#endif /* __DISABLED__ */ + + +/* + * r13 points to the PACA, r9 contains the saved CR, + * r12 contain the saved SRR1, SRR0 is still ready for return + * r3 has the faulting address + * r9 - r13 are saved in paca->exslb. + * r3 is saved in paca->slb_r3 + * We assume we aren't going to take any exceptions during this procedure. + */ +_GLOBAL(slb_miss_realmode) + mflr r10 + + stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ + std r10,PACA_EXSLB+EX_LR(r13) /* save LR */ + + bl .slb_allocate_realmode + + /* All done -- return from exception. */ + + ld r10,PACA_EXSLB+EX_LR(r13) + ld r3,PACA_EXSLB+EX_R3(r13) + lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */ +#ifdef CONFIG_PPC_ISERIES + ld r11,PACALPPACA+LPPACASRR0(r13) /* get SRR0 value */ +#endif /* CONFIG_PPC_ISERIES */ + + mtlr r10 + + andi. r10,r12,MSR_RI /* check for unrecoverable exception */ + beq- unrecov_slb + +.machine push +.machine "power4" + mtcrf 0x80,r9 + mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */ +.machine pop + +#ifdef CONFIG_PPC_ISERIES + mtspr SPRN_SRR0,r11 + mtspr SPRN_SRR1,r12 +#endif /* CONFIG_PPC_ISERIES */ + ld r9,PACA_EXSLB+EX_R9(r13) + ld r10,PACA_EXSLB+EX_R10(r13) + ld r11,PACA_EXSLB+EX_R11(r13) + ld r12,PACA_EXSLB+EX_R12(r13) + ld r13,PACA_EXSLB+EX_R13(r13) + rfid + b . /* prevent speculative execution */ + +unrecov_slb: + EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB) + DISABLE_INTS + bl .save_nvgprs +1: addi r3,r1,STACK_FRAME_OVERHEAD + bl .unrecoverable_exception + b 1b + .align 7 .globl hardware_interrupt_common .globl hardware_interrupt_entry @@ -1139,62 +1337,6 @@ _GLOBAL(do_stab_bolted) b . /* prevent speculative execution */ /* - * r13 points to the PACA, r9 contains the saved CR, - * r11 and r12 contain the saved SRR0 and SRR1. - * r3 has the faulting address - * r9 - r13 are saved in paca->exslb. - * r3 is saved in paca->slb_r3 - * We assume we aren't going to take any exceptions during this procedure. - */ -_GLOBAL(do_slb_miss) - mflr r10 - - stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ - std r10,PACA_EXSLB+EX_LR(r13) /* save LR */ - - bl .slb_allocate /* handle it */ - - /* All done -- return from exception. */ - - ld r10,PACA_EXSLB+EX_LR(r13) - ld r3,PACA_EXSLB+EX_R3(r13) - lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */ -#ifdef CONFIG_PPC_ISERIES - ld r11,PACALPPACA+LPPACASRR0(r13) /* get SRR0 value */ -#endif /* CONFIG_PPC_ISERIES */ - - mtlr r10 - - andi. r10,r12,MSR_RI /* check for unrecoverable exception */ - beq- unrecov_slb - -.machine push -.machine "power4" - mtcrf 0x80,r9 - mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */ -.machine pop - -#ifdef CONFIG_PPC_ISERIES - mtspr SPRN_SRR0,r11 - mtspr SPRN_SRR1,r12 -#endif /* CONFIG_PPC_ISERIES */ - ld r9,PACA_EXSLB+EX_R9(r13) - ld r10,PACA_EXSLB+EX_R10(r13) - ld r11,PACA_EXSLB+EX_R11(r13) - ld r12,PACA_EXSLB+EX_R12(r13) - ld r13,PACA_EXSLB+EX_R13(r13) - rfid - b . /* prevent speculative execution */ - -unrecov_slb: - EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB) - DISABLE_INTS - bl .save_nvgprs -1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .unrecoverable_exception - b 1b - -/* * Space for CPU0's segment table. * * On iSeries, the hypervisor must fill in at least one entry before @@ -1554,22 +1696,14 @@ _GLOBAL(pmac_secondary_start) * SPRG3 = paca virtual address */ _GLOBAL(__secondary_start) + /* Set thread priority to MEDIUM */ + HMT_MEDIUM - HMT_MEDIUM /* Set thread priority to MEDIUM */ - + /* Load TOC */ ld r2,PACATOC(r13) - li r6,0 - stb r6,PACAPROCENABLED(r13) - -#ifndef CONFIG_PPC_ISERIES - /* Initialize the page table pointer register. */ - LOADADDR(r6,_SDR1) - ld r6,0(r6) /* get the value of _SDR1 */ - mtspr SPRN_SDR1,r6 /* set the htab location */ -#endif - /* Initialize the first segment table (or SLB) entry */ - ld r3,PACASTABVIRT(r13) /* get addr of segment table */ - bl .stab_initialize + + /* Do early setup for that CPU (stab, slb, hash table pointer) */ + bl .early_setup_secondary /* Initialize the kernel stack. Just a repeat for iSeries. */ LOADADDR(r3,current_set) @@ -1578,37 +1712,7 @@ _GLOBAL(__secondary_start) addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD std r1,PACAKSAVE(r13) - ld r3,PACASTABREAL(r13) /* get raddr of segment table */ - ori r4,r3,1 /* turn on valid bit */ - -#ifdef CONFIG_PPC_ISERIES - li r0,-1 /* hypervisor call */ - li r3,1 - sldi r3,r3,63 /* 0x8000000000000000 */ - ori r3,r3,4 /* 0x8000000000000004 */ - sc /* HvCall_setASR */ -#else - /* set the ASR */ - ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ - ld r3,0(r3) - lwz r3,PLATFORM(r3) /* r3 = platform flags */ - andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */ - beq 98f /* branch if result is 0 */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmpwi r3,0x37 /* SStar */ - beq 97f - cmpwi r3,0x36 /* IStar */ - beq 97f - cmpwi r3,0x34 /* Pulsar */ - bne 98f -97: li r3,H_SET_ASR /* hcall = H_SET_ASR */ - HVSC /* Invoking hcall */ - b 99f -98: /* !(rpa hypervisor) || !(star) */ - mtasr r4 /* set the stab location */ -99: -#endif + /* Clear backchain so we get nice backtraces */ li r7,0 mtlr r7 @@ -1631,6 +1735,7 @@ _GLOBAL(start_secondary_prolog) li r3,0 std r3,0(r1) /* Zero the stack frame pointer */ bl .start_secondary + b . #endif /* @@ -1750,40 +1855,6 @@ _STATIC(start_here_multiplatform) mr r3,r31 bl .early_setup - /* set the ASR */ - ld r3,PACASTABREAL(r13) - ori r4,r3,1 /* turn on valid bit */ - ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ - ld r3,0(r3) - lwz r3,PLATFORM(r3) /* r3 = platform flags */ - andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */ - beq 98f /* branch if result is 0 */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmpwi r3,0x37 /* SStar */ - beq 97f - cmpwi r3,0x36 /* IStar */ - beq 97f - cmpwi r3,0x34 /* Pulsar */ - bne 98f -97: li r3,H_SET_ASR /* hcall = H_SET_ASR */ - HVSC /* Invoking hcall */ - b 99f -98: /* !(rpa hypervisor) || !(star) */ - mtasr r4 /* set the stab location */ -99: - /* Set SDR1 (hash table pointer) */ - ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ - ld r3,0(r3) - lwz r3,PLATFORM(r3) /* r3 = platform flags */ - /* Test if bit 0 is set (LPAR bit) */ - andi. r3,r3,PLATFORM_LPAR - bne 98f /* branch if result is !0 */ - LOADADDR(r6,_SDR1) /* Only if NOT LPAR */ - add r6,r6,r26 - ld r6,0(r6) /* get the value of _SDR1 */ - mtspr SPRN_SDR1,r6 /* set the htab location */ -98: LOADADDR(r3,.start_here_common) SET_REG_TO_CONST(r4, MSR_KERNEL) mtspr SPRN_SRR0,r3 @@ -1914,24 +1985,6 @@ _GLOBAL(hmt_start_secondary) blr #endif -#if defined(CONFIG_KEXEC) || defined(CONFIG_SMP) -_GLOBAL(smp_release_cpus) - /* All secondary cpus are spinning on a common - * spinloop, release them all now so they can start - * to spin on their individual paca spinloops. - * For non SMP kernels, the secondary cpus never - * get out of the common spinloop. - * XXX This does nothing useful on iSeries, secondaries are - * already waiting on their paca. - */ - li r3,1 - LOADADDR(r5,__secondary_hold_spinloop) - std r3,0(r5) - sync - blr -#endif /* CONFIG_SMP */ - - /* * We put a few things here that have to be page-aligned. * This stuff goes at the beginning of the bss, which is page-aligned. diff --git a/arch/ppc64/kernel/ioctl32.c b/arch/powerpc/kernel/ioctl32.c index ba4a899..3fa6a93 100644 --- a/arch/ppc64/kernel/ioctl32.c +++ b/arch/powerpc/kernel/ioctl32.c @@ -1,6 +1,6 @@ -/* +/* * ioctl32.c: Conversion between 32bit and 64bit native ioctls. - * + * * Based on sparc64 ioctl32.c by: * * Copyright (C) 1997-2000 Jakub Jelinek (jakub@redhat.com) diff --git a/arch/ppc64/kernel/irq.c b/arch/powerpc/kernel/irq.c index f41afe5..4b79406 100644 --- a/arch/ppc64/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -5,12 +5,12 @@ * Copyright (C) 1992 Linus Torvalds * Adapted from arch/i386 by Gary Thomas * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * Updated and modified by Cort Dougan (cort@cs.nmt.edu) - * Copyright (C) 1996 Cort Dougan + * Updated and modified by Cort Dougan <cort@fsmlabs.com> + * Copyright (C) 1996-2001 Cort Dougan * Adapted for Power Macintosh by Paul Mackerras * Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au) * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). - * + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version @@ -21,6 +21,14 @@ * instead of just grabbing them. Thus setups with different IRQ numbers * shouldn't result in any weird surprises, and installing new handlers * should be easier. + * + * The MPC8xx has an interrupt mask in the SIU. If a bit is set, the + * interrupt is _enabled_. As expected, IRQ0 is bit 0 in the 32-bit + * mask register (of which only 16 are defined), hence the weird shifting + * and complement of the cached_irq_mask. I want to be able to stuff + * this right into the SIU SMASK register. + * Many of the prep/chrp functions are conditional compiled on CONFIG_8xx + * to reduce code space and undefined function references. */ #include <linux/errno.h> @@ -29,6 +37,7 @@ #include <linux/kernel_stat.h> #include <linux/signal.h> #include <linux/sched.h> +#include <linux/ptrace.h> #include <linux/ioport.h> #include <linux/interrupt.h> #include <linux/timex.h> @@ -40,9 +49,13 @@ #include <linux/irq.h> #include <linux/proc_fs.h> #include <linux/random.h> -#include <linux/kallsyms.h> +#include <linux/seq_file.h> +#include <linux/cpumask.h> #include <linux/profile.h> #include <linux/bitops.h> +#ifdef CONFIG_PPC64 +#include <linux/kallsyms.h> +#endif #include <asm/uaccess.h> #include <asm/system.h> @@ -52,35 +65,54 @@ #include <asm/cache.h> #include <asm/prom.h> #include <asm/ptrace.h> -#include <asm/iSeries/ItLpQueue.h> #include <asm/machdep.h> +#ifdef CONFIG_PPC64 +#include <asm/iseries/it_lp_queue.h> #include <asm/paca.h> +#endif -#ifdef CONFIG_SMP -extern void iSeries_smp_message_recv( struct pt_regs * ); +static int ppc_spurious_interrupts; + +#if defined(CONFIG_PPC_ISERIES) && defined(CONFIG_SMP) +extern void iSeries_smp_message_recv(struct pt_regs *); +#endif + +#ifdef CONFIG_PPC32 +#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) + +unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; +atomic_t ppc_n_lost_interrupts; + +#ifdef CONFIG_TAU_INT +extern int tau_initialized; +extern int tau_interrupts(int); #endif -extern irq_desc_t irq_desc[NR_IRQS]; +#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE) +extern atomic_t ipi_recv; +extern atomic_t ipi_sent; +#endif +#endif /* CONFIG_PPC32 */ + +#ifdef CONFIG_PPC64 EXPORT_SYMBOL(irq_desc); int distribute_irqs = 1; int __irq_offset_value; -int ppc_spurious_interrupts; u64 ppc64_interrupt_controller; +#endif /* CONFIG_PPC64 */ int show_interrupts(struct seq_file *p, void *v) { - int i = *(loff_t *) v, j; - struct irqaction * action; + int i = *(loff_t *)v, j; + struct irqaction *action; irq_desc_t *desc; unsigned long flags; if (i == 0) { - seq_printf(p, " "); - for (j=0; j<NR_CPUS; j++) { - if (cpu_online(j)) - seq_printf(p, "CPU%d ",j); - } + seq_puts(p, " "); + for_each_online_cpu(j) + seq_printf(p, "CPU%d ", j); seq_putc(p, '\n'); } @@ -92,26 +124,41 @@ int show_interrupts(struct seq_file *p, void *v) goto skip; seq_printf(p, "%3d: ", i); #ifdef CONFIG_SMP - for (j = 0; j < NR_CPUS; j++) { - if (cpu_online(j)) - seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); - } + for_each_online_cpu(j) + seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); #else seq_printf(p, "%10u ", kstat_irqs(i)); #endif /* CONFIG_SMP */ if (desc->handler) - seq_printf(p, " %s ", desc->handler->typename ); + seq_printf(p, " %s ", desc->handler->typename); else - seq_printf(p, " None "); + seq_puts(p, " None "); seq_printf(p, "%s", (desc->status & IRQ_LEVEL) ? "Level " : "Edge "); - seq_printf(p, " %s",action->name); - for (action=action->next; action; action = action->next) + seq_printf(p, " %s", action->name); + for (action = action->next; action; action = action->next) seq_printf(p, ", %s", action->name); seq_putc(p, '\n'); skip: spin_unlock_irqrestore(&desc->lock, flags); - } else if (i == NR_IRQS) + } else if (i == NR_IRQS) { +#ifdef CONFIG_PPC32 +#ifdef CONFIG_TAU_INT + if (tau_initialized){ + seq_puts(p, "TAU: "); + for (j = 0; j < NR_CPUS; j++) + if (cpu_online(j)) + seq_printf(p, "%10u ", tau_interrupts(j)); + seq_puts(p, " PowerPC Thermal Assist (cpu temp)\n"); + } +#endif +#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE) + /* should this be per processor send/receive? */ + seq_printf(p, "IPI (recv/sent): %10u/%u\n", + atomic_read(&ipi_recv), atomic_read(&ipi_sent)); +#endif +#endif /* CONFIG_PPC32 */ seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts); + } return 0; } @@ -144,126 +191,6 @@ void fixup_irqs(cpumask_t map) } #endif -extern int noirqdebug; - -/* - * Eventually, this should take an array of interrupts and an array size - * so it can dispatch multiple interrupts. - */ -void ppc_irq_dispatch_handler(struct pt_regs *regs, int irq) -{ - int status; - struct irqaction *action; - int cpu = smp_processor_id(); - irq_desc_t *desc = get_irq_desc(irq); - irqreturn_t action_ret; -#ifdef CONFIG_IRQSTACKS - struct thread_info *curtp, *irqtp; -#endif - - kstat_cpu(cpu).irqs[irq]++; - - if (desc->status & IRQ_PER_CPU) { - /* no locking required for CPU-local interrupts: */ - ack_irq(irq); - action_ret = handle_IRQ_event(irq, regs, desc->action); - desc->handler->end(irq); - return; - } - - spin_lock(&desc->lock); - ack_irq(irq); - /* - REPLAY is when Linux resends an IRQ that was dropped earlier - WAITING is used by probe to mark irqs that are being tested - */ - status = desc->status & ~(IRQ_REPLAY | IRQ_WAITING); - status |= IRQ_PENDING; /* we _want_ to handle it */ - - /* - * If the IRQ is disabled for whatever reason, we cannot - * use the action we have. - */ - action = NULL; - if (likely(!(status & (IRQ_DISABLED | IRQ_INPROGRESS)))) { - action = desc->action; - if (!action || !action->handler) { - ppc_spurious_interrupts++; - printk(KERN_DEBUG "Unhandled interrupt %x, disabled\n", irq); - /* We can't call disable_irq here, it would deadlock */ - if (!desc->depth) - desc->depth = 1; - desc->status |= IRQ_DISABLED; - /* This is not a real spurrious interrupt, we - * have to eoi it, so we jump to out - */ - mask_irq(irq); - goto out; - } - status &= ~IRQ_PENDING; /* we commit to handling */ - status |= IRQ_INPROGRESS; /* we are handling it */ - } - desc->status = status; - - /* - * If there is no IRQ handler or it was disabled, exit early. - Since we set PENDING, if another processor is handling - a different instance of this same irq, the other processor - will take care of it. - */ - if (unlikely(!action)) - goto out; - - /* - * Edge triggered interrupts need to remember - * pending events. - * This applies to any hw interrupts that allow a second - * instance of the same irq to arrive while we are in do_IRQ - * or in the handler. But the code here only handles the _second_ - * instance of the irq, not the third or fourth. So it is mostly - * useful for irq hardware that does not mask cleanly in an - * SMP environment. - */ - for (;;) { - spin_unlock(&desc->lock); - -#ifdef CONFIG_IRQSTACKS - /* Switch to the irq stack to handle this */ - curtp = current_thread_info(); - irqtp = hardirq_ctx[smp_processor_id()]; - if (curtp != irqtp) { - irqtp->task = curtp->task; - irqtp->flags = 0; - action_ret = call_handle_IRQ_event(irq, regs, action, irqtp); - irqtp->task = NULL; - if (irqtp->flags) - set_bits(irqtp->flags, &curtp->flags); - } else -#endif - action_ret = handle_IRQ_event(irq, regs, action); - - spin_lock(&desc->lock); - if (!noirqdebug) - note_interrupt(irq, desc, action_ret, regs); - if (likely(!(desc->status & IRQ_PENDING))) - break; - desc->status &= ~IRQ_PENDING; - } -out: - desc->status &= ~IRQ_INPROGRESS; - /* - * The ->end() handler has to deal with interrupts which got - * disabled while the handler was running. - */ - if (desc->handler) { - if (desc->handler->end) - desc->handler->end(irq); - else if (desc->handler->enable) - desc->handler->enable(irq); - } - spin_unlock(&desc->lock); -} - #ifdef CONFIG_PPC_ISERIES void do_IRQ(struct pt_regs *regs) { @@ -310,8 +237,11 @@ void do_IRQ(struct pt_regs *regs) void do_IRQ(struct pt_regs *regs) { int irq; +#ifdef CONFIG_IRQSTACKS + struct thread_info *curtp, *irqtp; +#endif - irq_enter(); + irq_enter(); #ifdef CONFIG_DEBUG_STACKOVERFLOW /* Debugging check for stack overflow: is there less than 2KB free? */ @@ -328,20 +258,44 @@ void do_IRQ(struct pt_regs *regs) } #endif + /* + * Every platform is required to implement ppc_md.get_irq. + * This function will either return an irq number or -1 to + * indicate there are no more pending. + * The value -2 is for buggy hardware and means that this IRQ + * has already been handled. -- Tom + */ irq = ppc_md.get_irq(regs); - if (irq >= 0) - ppc_irq_dispatch_handler(regs, irq); - else - /* That's not SMP safe ... but who cares ? */ - ppc_spurious_interrupts++; - - irq_exit(); + if (irq >= 0) { +#ifdef CONFIG_IRQSTACKS + /* Switch to the irq stack to handle this */ + curtp = current_thread_info(); + irqtp = hardirq_ctx[smp_processor_id()]; + if (curtp != irqtp) { + irqtp->task = curtp->task; + irqtp->flags = 0; + call___do_IRQ(irq, regs, irqtp); + irqtp->task = NULL; + if (irqtp->flags) + set_bits(irqtp->flags, &curtp->flags); + } else +#endif + __do_IRQ(irq, regs); + } else +#ifdef CONFIG_PPC32 + if (irq != -2) +#endif + /* That's not SMP safe ... but who cares ? */ + ppc_spurious_interrupts++; + irq_exit(); } + #endif /* CONFIG_PPC_ISERIES */ void __init init_IRQ(void) { +#ifdef CONFIG_PPC64 static int once = 0; if (once) @@ -349,10 +303,14 @@ void __init init_IRQ(void) once++; +#endif ppc_md.init_IRQ(); +#ifdef CONFIG_PPC64 irq_ctx_init(); +#endif } +#ifdef CONFIG_PPC64 #ifndef CONFIG_PPC_ISERIES /* * Virtual IRQ mapping code, used on systems with XICS interrupt controllers. @@ -392,7 +350,7 @@ int virt_irq_create_mapping(unsigned int real_irq) if (ppc64_interrupt_controller == IC_OPEN_PIC) return real_irq; /* no mapping for openpic (for now) */ - if (ppc64_interrupt_controller == IC_BPA_IIC) + if (ppc64_interrupt_controller == IC_CELL_PIC) return real_irq; /* no mapping for iic either */ /* don't map interrupts < MIN_VIRT_IRQ */ @@ -517,3 +475,4 @@ static int __init setup_noirqdistrib(char *str) } __setup("noirqdistrib", setup_noirqdistrib); +#endif /* CONFIG_PPC64 */ diff --git a/arch/ppc64/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index cae19bb..5e954fa 100644 --- a/arch/ppc64/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -26,15 +26,16 @@ #include <linux/init.h> #include <linux/seq_file.h> #include <asm/uaccess.h> -#include <asm/iSeries/HvLpConfig.h> +#include <asm/iseries/hv_lp_config.h> #include <asm/lppaca.h> #include <asm/hvcall.h> #include <asm/firmware.h> #include <asm/rtas.h> #include <asm/system.h> #include <asm/time.h> -#include <asm/iSeries/ItExtVpdPanel.h> +#include <asm/iseries/it_exp_vpd_panel.h> #include <asm/prom.h> +#include <asm/systemcfg.h> #define MODULE_VERS "1.6" #define MODULE_NAME "lparcfg" @@ -96,7 +97,7 @@ static unsigned long get_purr(void) #define lparcfg_write NULL -/* +/* * Methods used to fetch LPAR data when running on an iSeries platform. */ static int lparcfg_data(struct seq_file *m, void *v) @@ -168,7 +169,7 @@ static int lparcfg_data(struct seq_file *m, void *v) #endif /* CONFIG_PPC_ISERIES */ #ifdef CONFIG_PPC_PSERIES -/* +/* * Methods used to fetch LPAR data when running on a pSeries platform. */ @@ -177,7 +178,7 @@ static int lparcfg_data(struct seq_file *m, void *v) * entitled_capacity,unallocated_capacity, * aggregation, resource_capability). * - * R4 = Entitled Processor Capacity Percentage. + * R4 = Entitled Processor Capacity Percentage. * R5 = Unallocated Processor Capacity Percentage. * R6 (AABBCCDDEEFFGGHH). * XXXX - reserved (0) @@ -190,7 +191,7 @@ static int lparcfg_data(struct seq_file *m, void *v) * XX - variable processor Capacity Weight * XX - Unallocated Variable Processor Capacity Weight. * XXXX - Active processors in Physical Processor Pool. - * XXXX - Processors active on platform. + * XXXX - Processors active on platform. */ static unsigned int h_get_ppp(unsigned long *entitled, unsigned long *unallocated, @@ -273,7 +274,7 @@ static void parse_system_parameter_string(struct seq_file *m) if (!workbuffer) { printk(KERN_ERR "%s %s kmalloc failure at line %d \n", __FILE__, __FUNCTION__, __LINE__); - kfree(local_buffer); + kfree(local_buffer); return; } #ifdef LPARCFG_DEBUG @@ -371,7 +372,7 @@ static int lparcfg_data(struct seq_file *m, void *v) lrdrp = (int *)get_property(rtas_node, "ibm,lrdr-capacity", NULL); if (lrdrp == NULL) { - partition_potential_processors = systemcfg->processorCount; + partition_potential_processors = _systemcfg->processorCount; } else { partition_potential_processors = *(lrdrp + 4); } @@ -599,9 +600,7 @@ int __init lparcfg_init(void) void __exit lparcfg_cleanup(void) { if (proc_ppc64_lparcfg) { - if (proc_ppc64_lparcfg->data) { - kfree(proc_ppc64_lparcfg->data); - } + kfree(proc_ppc64_lparcfg->data); remove_proc_entry("lparcfg", proc_ppc64_lparcfg->parent); } } diff --git a/arch/powerpc/kernel/lparmap.c b/arch/powerpc/kernel/lparmap.c index b81de28..5a05a79 100644 --- a/arch/powerpc/kernel/lparmap.c +++ b/arch/powerpc/kernel/lparmap.c @@ -8,7 +8,7 @@ */ #include <asm/mmu.h> #include <asm/page.h> -#include <asm/iSeries/LparMap.h> +#include <asm/iseries/lpar_map.h> const struct LparMap __attribute__((__section__(".text"))) xLparMap = { .xNumberEsids = HvEsidsToMap, @@ -25,7 +25,7 @@ const struct LparMap __attribute__((__section__(".text"))) xLparMap = { .xRanges = { { .xPages = HvPagesToMap, .xOffset = 0, - .xVPN = KERNEL_VSID(KERNELBASE) << (SID_SHIFT - PAGE_SHIFT), + .xVPN = KERNEL_VSID(KERNELBASE) << (SID_SHIFT - HW_PAGE_SHIFT), }, }, }; diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 3bedb53..f6d84a7 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -519,7 +519,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) * * flush_icache_range(unsigned long start, unsigned long stop) */ -_GLOBAL(flush_icache_range) +_GLOBAL(__flush_icache_range) BEGIN_FTR_SECTION blr /* for 601, do nothing */ END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) @@ -607,27 +607,6 @@ _GLOBAL(invalidate_dcache_range) sync /* wait for dcbi's to get to ram */ blr -#ifdef CONFIG_NOT_COHERENT_CACHE -/* - * 40x cores have 8K or 16K dcache and 32 byte line size. - * 44x has a 32K dcache and 32 byte line size. - * 8xx has 1, 2, 4, 8K variants. - * For now, cover the worst case of the 44x. - * Must be called with external interrupts disabled. - */ -#define CACHE_NWAYS 64 -#define CACHE_NLINES 16 - -_GLOBAL(flush_dcache_all) - li r4, (2 * CACHE_NWAYS * CACHE_NLINES) - mtctr r4 - lis r5, KERNELBASE@h -1: lwz r3, 0(r5) /* Load one word from every line */ - addi r5, r5, L1_CACHE_BYTES - bdnz 1b - blr -#endif /* CONFIG_NOT_COHERENT_CACHE */ - /* * Flush a particular page from the data cache to RAM. * Note: this is necessary because the instruction cache does *not* diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index b3e95ff..ae48a00 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -89,12 +89,12 @@ _GLOBAL(call_do_softirq) mtlr r0 blr -_GLOBAL(call_handle_IRQ_event) +_GLOBAL(call___do_IRQ) mflr r0 std r0,16(r1) - stdu r1,THREAD_SIZE-112(r6) - mr r1,r6 - bl .handle_IRQ_event + stdu r1,THREAD_SIZE-112(r5) + mr r1,r5 + bl .__do_IRQ ld r1,0(r1) ld r0,16(r1) mtlr r0 @@ -604,6 +604,76 @@ _GLOBAL(real_writeb) #endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */ /* + * SCOM access functions for 970 (FX only for now) + * + * unsigned long scom970_read(unsigned int address); + * void scom970_write(unsigned int address, unsigned long value); + * + * The address passed in is the 24 bits register address. This code + * is 970 specific and will not check the status bits, so you should + * know what you are doing. + */ +_GLOBAL(scom970_read) + /* interrupts off */ + mfmsr r4 + ori r0,r4,MSR_EE + xori r0,r0,MSR_EE + mtmsrd r0,1 + + /* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits + * (including parity). On current CPUs they must be 0'd, + * and finally or in RW bit + */ + rlwinm r3,r3,8,0,15 + ori r3,r3,0x8000 + + /* do the actual scom read */ + sync + mtspr SPRN_SCOMC,r3 + isync + mfspr r3,SPRN_SCOMD + isync + mfspr r0,SPRN_SCOMC + isync + + /* XXX: fixup result on some buggy 970's (ouch ! we lost a bit, bah + * that's the best we can do). Not implemented yet as we don't use + * the scom on any of the bogus CPUs yet, but may have to be done + * ultimately + */ + + /* restore interrupts */ + mtmsrd r4,1 + blr + + +_GLOBAL(scom970_write) + /* interrupts off */ + mfmsr r5 + ori r0,r5,MSR_EE + xori r0,r0,MSR_EE + mtmsrd r0,1 + + /* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits + * (including parity). On current CPUs they must be 0'd. + */ + + rlwinm r3,r3,8,0,15 + + sync + mtspr SPRN_SCOMD,r4 /* write data */ + isync + mtspr SPRN_SCOMC,r3 /* write command */ + isync + mfspr 3,SPRN_SCOMC + isync + + /* restore interrupts */ + mtmsrd r5,1 + blr + + +/* * Create a kernel thread * kernel_thread(fn, arg, flags) */ diff --git a/arch/ppc64/kernel/pacaData.c b/arch/powerpc/kernel/paca.c index 33a2d8d..3cf2517 100644 --- a/arch/ppc64/kernel/pacaData.c +++ b/arch/powerpc/kernel/paca.c @@ -15,24 +15,23 @@ #include <asm/processor.h> #include <asm/ptrace.h> #include <asm/page.h> - +#include <asm/systemcfg.h> #include <asm/lppaca.h> -#include <asm/iSeries/ItLpQueue.h> +#include <asm/iseries/it_lp_queue.h> #include <asm/paca.h> static union { struct systemcfg data; u8 page[PAGE_SIZE]; -} systemcfg_store __page_aligned; -struct systemcfg *systemcfg = &systemcfg_store.data; -EXPORT_SYMBOL(systemcfg); +} systemcfg_store __attribute__((__section__(".data.page.aligned"))); +struct systemcfg *_systemcfg = &systemcfg_store.data; /* This symbol is provided by the linker - let it fill in the paca * field correctly */ extern unsigned long __toc_start; -/* The Paca is an array with one entry per processor. Each contains an +/* The Paca is an array with one entry per processor. Each contains an * lppaca, which contains the information shared between the * hypervisor and Linux. Each also contains an ItLpRegSave area which * is used by the hypervisor to save registers. diff --git a/arch/powerpc/kernel/ppc32.h b/arch/powerpc/kernel/ppc32.h new file mode 100644 index 0000000..90e5627 --- /dev/null +++ b/arch/powerpc/kernel/ppc32.h @@ -0,0 +1,138 @@ +#ifndef _PPC64_PPC32_H +#define _PPC64_PPC32_H + +#include <linux/compat.h> +#include <asm/siginfo.h> +#include <asm/signal.h> + +/* + * Data types and macros for providing 32b PowerPC support. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* These are here to support 32-bit syscalls on a 64-bit kernel. */ + +typedef struct compat_siginfo { + int si_signo; + int si_errno; + int si_code; + + union { + int _pad[SI_PAD_SIZE32]; + + /* kill() */ + struct { + compat_pid_t _pid; /* sender's pid */ + compat_uid_t _uid; /* sender's uid */ + } _kill; + + /* POSIX.1b timers */ + struct { + compat_timer_t _tid; /* timer id */ + int _overrun; /* overrun count */ + compat_sigval_t _sigval; /* same as below */ + int _sys_private; /* not to be passed to user */ + } _timer; + + /* POSIX.1b signals */ + struct { + compat_pid_t _pid; /* sender's pid */ + compat_uid_t _uid; /* sender's uid */ + compat_sigval_t _sigval; + } _rt; + + /* SIGCHLD */ + struct { + compat_pid_t _pid; /* which child */ + compat_uid_t _uid; /* sender's uid */ + int _status; /* exit code */ + compat_clock_t _utime; + compat_clock_t _stime; + } _sigchld; + + /* SIGILL, SIGFPE, SIGSEGV, SIGBUS, SIGEMT */ + struct { + unsigned int _addr; /* faulting insn/memory ref. */ + } _sigfault; + + /* SIGPOLL */ + struct { + int _band; /* POLL_IN, POLL_OUT, POLL_MSG */ + int _fd; + } _sigpoll; + } _sifields; +} compat_siginfo_t; + +#define __old_sigaction32 old_sigaction32 + +struct __old_sigaction32 { + compat_uptr_t sa_handler; + compat_old_sigset_t sa_mask; + unsigned int sa_flags; + compat_uptr_t sa_restorer; /* not used by Linux/SPARC yet */ +}; + + + +struct sigaction32 { + compat_uptr_t sa_handler; /* Really a pointer, but need to deal with 32 bits */ + unsigned int sa_flags; + compat_uptr_t sa_restorer; /* Another 32 bit pointer */ + compat_sigset_t sa_mask; /* A 32 bit mask */ +}; + +typedef struct sigaltstack_32 { + unsigned int ss_sp; + int ss_flags; + compat_size_t ss_size; +} stack_32_t; + +struct pt_regs32 { + unsigned int gpr[32]; + unsigned int nip; + unsigned int msr; + unsigned int orig_gpr3; /* Used for restarting system calls */ + unsigned int ctr; + unsigned int link; + unsigned int xer; + unsigned int ccr; + unsigned int mq; /* 601 only (not used at present) */ + unsigned int trap; /* Reason for being here */ + unsigned int dar; /* Fault registers */ + unsigned int dsisr; + unsigned int result; /* Result of a system call */ +}; + +struct sigcontext32 { + unsigned int _unused[4]; + int signal; + compat_uptr_t handler; + unsigned int oldmask; + compat_uptr_t regs; /* 4 byte pointer to the pt_regs32 structure. */ +}; + +struct mcontext32 { + elf_gregset_t32 mc_gregs; + elf_fpregset_t mc_fregs; + unsigned int mc_pad[2]; + elf_vrregset_t32 mc_vregs __attribute__((__aligned__(16))); +}; + +struct ucontext32 { + unsigned int uc_flags; + unsigned int uc_link; + stack_32_t uc_stack; + int uc_pad[7]; + compat_uptr_t uc_regs; /* points to uc_mcontext field */ + compat_sigset_t uc_sigmask; /* mask last for extensibility */ + /* glibc has 1024-bit signal masks, ours are 64-bit */ + int uc_maskext[30]; + int uc_pad2[3]; + struct mcontext32 uc_mcontext; +}; + +#endif /* _PPC64_PPC32_H */ diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 8bc5403..5dcf4ba 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -44,6 +44,7 @@ #include <asm/cputable.h> #include <asm/btext.h> #include <asm/div64.h> +#include <asm/signal.h> #ifdef CONFIG_8xx #include <asm/commproc.h> @@ -56,7 +57,6 @@ extern void machine_check_exception(struct pt_regs *regs); extern void alignment_exception(struct pt_regs *regs); extern void program_check_exception(struct pt_regs *regs); extern void single_step_exception(struct pt_regs *regs); -extern int do_signal(sigset_t *, struct pt_regs *); extern int pmac_newworld; extern int sys_sigreturn(struct pt_regs *regs); @@ -81,15 +81,6 @@ EXPORT_SYMBOL(_prep_type); EXPORT_SYMBOL(ucSystemType); #endif -#if !defined(__INLINE_BITOPS) -EXPORT_SYMBOL(set_bit); -EXPORT_SYMBOL(clear_bit); -EXPORT_SYMBOL(change_bit); -EXPORT_SYMBOL(test_and_set_bit); -EXPORT_SYMBOL(test_and_clear_bit); -EXPORT_SYMBOL(test_and_change_bit); -#endif /* __INLINE_BITOPS */ - EXPORT_SYMBOL(strcpy); EXPORT_SYMBOL(strncpy); EXPORT_SYMBOL(strcat); @@ -197,9 +188,6 @@ EXPORT_SYMBOL(adb_try_handler_change); EXPORT_SYMBOL(cuda_request); EXPORT_SYMBOL(cuda_poll); #endif /* CONFIG_ADB_CUDA */ -#if defined(CONFIG_PPC_MULTIPLATFORM) && defined(CONFIG_PPC32) -EXPORT_SYMBOL(_machine); -#endif #ifdef CONFIG_PPC_PMAC EXPORT_SYMBOL(sys_ctrler); #endif diff --git a/arch/ppc64/kernel/proc_ppc64.c b/arch/powerpc/kernel/proc_ppc64.c index a87c66a..a1c1950 100644 --- a/arch/ppc64/kernel/proc_ppc64.c +++ b/arch/powerpc/kernel/proc_ppc64.c @@ -1,18 +1,16 @@ /* - * arch/ppc64/kernel/proc_ppc64.c - * * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen IBM Corporation - * + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * + * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA @@ -53,7 +51,7 @@ static int __init proc_ppc64_create(void) if (!root) return 1; - if (!(systemcfg->platform & (PLATFORM_PSERIES | PLATFORM_BPA))) + if (!(platform_is_pseries() || _machine == PLATFORM_CELL)) return 0; if (!proc_mkdir("rtas", root)) @@ -74,7 +72,7 @@ static int __init proc_ppc64_init(void) if (!pde) return 1; pde->nlink = 1; - pde->data = systemcfg; + pde->data = _systemcfg; pde->size = PAGE_SIZE; pde->proc_fops = &page_map_fops; diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 8f85dab..de69fb37c 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -46,9 +46,9 @@ #include <asm/processor.h> #include <asm/mmu.h> #include <asm/prom.h> +#include <asm/machdep.h> #ifdef CONFIG_PPC64 #include <asm/firmware.h> -#include <asm/plpar_wrappers.h> #include <asm/time.h> #endif @@ -201,27 +201,13 @@ int dump_spe(struct pt_regs *regs, elf_vrregset_t *evrregs) } #endif /* CONFIG_SPE */ -static void set_dabr_spr(unsigned long val) -{ - mtspr(SPRN_DABR, val); -} - int set_dabr(unsigned long dabr) { - int ret = 0; - -#ifdef CONFIG_PPC64 - if (firmware_has_feature(FW_FEATURE_XDABR)) { - /* We want to catch accesses from kernel and userspace */ - unsigned long flags = H_DABRX_KERNEL|H_DABRX_USER; - ret = plpar_set_xdabr(dabr, flags); - } else if (firmware_has_feature(FW_FEATURE_DABR)) { - ret = plpar_set_dabr(dabr); - } else -#endif - set_dabr_spr(dabr); + if (ppc_md.set_dabr) + return ppc_md.set_dabr(dabr); - return ret; + mtspr(SPRN_DABR, dabr); + return 0; } #ifdef CONFIG_PPC64 @@ -566,12 +552,10 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, #ifdef CONFIG_PPC64 if (cpu_has_feature(CPU_FTR_SLB)) { unsigned long sp_vsid = get_kernel_vsid(sp); + unsigned long llp = mmu_psize_defs[mmu_linear_psize].sllp; sp_vsid <<= SLB_VSID_SHIFT; - sp_vsid |= SLB_VSID_KERNEL; - if (cpu_has_feature(CPU_FTR_16M_PAGE)) - sp_vsid |= SLB_VSID_L; - + sp_vsid |= SLB_VSID_KERNEL | llp; p->thread.ksp_vsid = sp_vsid; } diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 2eccd0e..6a5b468 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -48,9 +48,6 @@ #include <asm/machdep.h> #include <asm/pSeries_reconfig.h> #include <asm/pci-bridge.h> -#ifdef CONFIG_PPC64 -#include <asm/systemcfg.h> -#endif #ifdef DEBUG #define DBG(fmt...) printk(KERN_ERR fmt) @@ -74,10 +71,6 @@ struct isa_reg_property { typedef int interpret_func(struct device_node *, unsigned long *, int, int, int); -extern struct rtas_t rtas; -extern struct lmb lmb; -extern unsigned long klimit; - static int __initdata dt_root_addr_cells; static int __initdata dt_root_size_cells; @@ -391,7 +384,7 @@ static int __devinit finish_node_interrupts(struct device_node *np, #ifdef CONFIG_PPC64 /* We offset irq numbers for the u3 MPIC by 128 in PowerMac */ - if (systemcfg->platform == PLATFORM_POWERMAC && ic && ic->parent) { + if (_machine == PLATFORM_POWERMAC && ic && ic->parent) { char *name = get_property(ic->parent, "name", NULL); if (name && !strcmp(name, "u3")) np->intrs[intrcount].line += 128; @@ -724,10 +717,10 @@ static inline char *find_flat_dt_string(u32 offset) * used to extract the memory informations at boot before we can * unflatten the tree */ -static int __init scan_flat_dt(int (*it)(unsigned long node, - const char *uname, int depth, - void *data), - void *data) +int __init of_scan_flat_dt(int (*it)(unsigned long node, + const char *uname, int depth, + void *data), + void *data) { unsigned long p = ((unsigned long)initial_boot_params) + initial_boot_params->off_dt_struct; @@ -784,8 +777,8 @@ static int __init scan_flat_dt(int (*it)(unsigned long node, * This function can be used within scan_flattened_dt callback to get * access to properties */ -static void* __init get_flat_dt_prop(unsigned long node, const char *name, - unsigned long *size) +void* __init of_get_flat_dt_prop(unsigned long node, const char *name, + unsigned long *size) { unsigned long p = node; @@ -1087,27 +1080,14 @@ void __init unflatten_device_tree(void) static int __init early_init_dt_scan_cpus(unsigned long node, const char *uname, int depth, void *data) { - char *type = get_flat_dt_prop(node, "device_type", NULL); u32 *prop; - unsigned long size = 0; + unsigned long size; + char *type = of_get_flat_dt_prop(node, "device_type", &size); /* We are scanning "cpu" nodes only */ if (type == NULL || strcmp(type, "cpu") != 0) return 0; -#ifdef CONFIG_PPC_PSERIES - /* On LPAR, look for the first ibm,pft-size property for the hash table size - */ - if (systemcfg->platform == PLATFORM_PSERIES_LPAR && ppc64_pft_size == 0) { - u32 *pft_size; - pft_size = get_flat_dt_prop(node, "ibm,pft-size", NULL); - if (pft_size != NULL) { - /* pft_size[0] is the NUMA CEC cookie */ - ppc64_pft_size = pft_size[1]; - } - } -#endif - boot_cpuid = 0; boot_cpuid_phys = 0; if (initial_boot_params && initial_boot_params->version >= 2) { @@ -1117,8 +1097,9 @@ static int __init early_init_dt_scan_cpus(unsigned long node, boot_cpuid_phys = initial_boot_params->boot_cpuid_phys; } else { /* Check if it's the boot-cpu, set it's hw index now */ - if (get_flat_dt_prop(node, "linux,boot-cpu", NULL) != NULL) { - prop = get_flat_dt_prop(node, "reg", NULL); + if (of_get_flat_dt_prop(node, + "linux,boot-cpu", NULL) != NULL) { + prop = of_get_flat_dt_prop(node, "reg", NULL); if (prop != NULL) boot_cpuid_phys = *prop; } @@ -1127,14 +1108,14 @@ static int __init early_init_dt_scan_cpus(unsigned long node, #ifdef CONFIG_ALTIVEC /* Check if we have a VMX and eventually update CPU features */ - prop = (u32 *)get_flat_dt_prop(node, "ibm,vmx", &size); + prop = (u32 *)of_get_flat_dt_prop(node, "ibm,vmx", NULL); if (prop && (*prop) > 0) { cur_cpu_spec->cpu_features |= CPU_FTR_ALTIVEC; cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC; } /* Same goes for Apple's "altivec" property */ - prop = (u32 *)get_flat_dt_prop(node, "altivec", NULL); + prop = (u32 *)of_get_flat_dt_prop(node, "altivec", NULL); if (prop) { cur_cpu_spec->cpu_features |= CPU_FTR_ALTIVEC; cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC; @@ -1147,7 +1128,7 @@ static int __init early_init_dt_scan_cpus(unsigned long node, * this by looking at the size of the ibm,ppc-interrupt-server#s * property */ - prop = (u32 *)get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", + prop = (u32 *)of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", &size); cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT; if (prop && ((size / sizeof(u32)) > 1)) @@ -1170,34 +1151,30 @@ static int __init early_init_dt_scan_chosen(unsigned long node, return 0; /* get platform type */ - prop = (u32 *)get_flat_dt_prop(node, "linux,platform", NULL); + prop = (u32 *)of_get_flat_dt_prop(node, "linux,platform", NULL); if (prop == NULL) return 0; -#ifdef CONFIG_PPC64 - systemcfg->platform = *prop; -#else #ifdef CONFIG_PPC_MULTIPLATFORM _machine = *prop; #endif -#endif #ifdef CONFIG_PPC64 /* check if iommu is forced on or off */ - if (get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL) + if (of_get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL) iommu_is_off = 1; - if (get_flat_dt_prop(node, "linux,iommu-force-on", NULL) != NULL) + if (of_get_flat_dt_prop(node, "linux,iommu-force-on", NULL) != NULL) iommu_force_on = 1; #endif - lprop = get_flat_dt_prop(node, "linux,memory-limit", NULL); + lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL); if (lprop) memory_limit = *lprop; #ifdef CONFIG_PPC64 - lprop = get_flat_dt_prop(node, "linux,tce-alloc-start", NULL); + lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-start", NULL); if (lprop) tce_alloc_start = *lprop; - lprop = get_flat_dt_prop(node, "linux,tce-alloc-end", NULL); + lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL); if (lprop) tce_alloc_end = *lprop; #endif @@ -1209,9 +1186,9 @@ static int __init early_init_dt_scan_chosen(unsigned long node, { u64 *basep, *entryp; - basep = get_flat_dt_prop(node, "linux,rtas-base", NULL); - entryp = get_flat_dt_prop(node, "linux,rtas-entry", NULL); - prop = get_flat_dt_prop(node, "linux,rtas-size", NULL); + basep = of_get_flat_dt_prop(node, "linux,rtas-base", NULL); + entryp = of_get_flat_dt_prop(node, "linux,rtas-entry", NULL); + prop = of_get_flat_dt_prop(node, "linux,rtas-size", NULL); if (basep && entryp && prop) { rtas.base = *basep; rtas.entry = *entryp; @@ -1232,11 +1209,11 @@ static int __init early_init_dt_scan_root(unsigned long node, if (depth != 0) return 0; - prop = get_flat_dt_prop(node, "#size-cells", NULL); + prop = of_get_flat_dt_prop(node, "#size-cells", NULL); dt_root_size_cells = (prop == NULL) ? 1 : *prop; DBG("dt_root_size_cells = %x\n", dt_root_size_cells); - prop = get_flat_dt_prop(node, "#address-cells", NULL); + prop = of_get_flat_dt_prop(node, "#address-cells", NULL); dt_root_addr_cells = (prop == NULL) ? 2 : *prop; DBG("dt_root_addr_cells = %x\n", dt_root_addr_cells); @@ -1271,21 +1248,28 @@ static unsigned long __init dt_mem_next_cell(int s, cell_t **cellp) static int __init early_init_dt_scan_memory(unsigned long node, const char *uname, int depth, void *data) { - char *type = get_flat_dt_prop(node, "device_type", NULL); + char *type = of_get_flat_dt_prop(node, "device_type", NULL); cell_t *reg, *endp; unsigned long l; /* We are scanning "memory" nodes only */ - if (type == NULL || strcmp(type, "memory") != 0) + if (type == NULL) { + /* + * The longtrail doesn't have a device_type on the + * /memory node, so look for the node called /memory@0. + */ + if (depth != 1 || strcmp(uname, "memory@0") != 0) + return 0; + } else if (strcmp(type, "memory") != 0) return 0; - reg = (cell_t *)get_flat_dt_prop(node, "reg", &l); + reg = (cell_t *)of_get_flat_dt_prop(node, "reg", &l); if (reg == NULL) return 0; endp = reg + (l / sizeof(cell_t)); - DBG("memory scan node %s ..., reg size %ld, data: %x %x %x %x, ...\n", + DBG("memory scan node %s, reg size %ld, data: %x %x %x %x,\n", uname, l, reg[0], reg[1], reg[2], reg[3]); while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) { @@ -1343,17 +1327,14 @@ void __init early_init_devtree(void *params) * device-tree, including the platform type, initrd location and * size, TCE reserve, and more ... */ - scan_flat_dt(early_init_dt_scan_chosen, NULL); + of_scan_flat_dt(early_init_dt_scan_chosen, NULL); /* Scan memory nodes and rebuild LMBs */ lmb_init(); - scan_flat_dt(early_init_dt_scan_root, NULL); - scan_flat_dt(early_init_dt_scan_memory, NULL); + of_scan_flat_dt(early_init_dt_scan_root, NULL); + of_scan_flat_dt(early_init_dt_scan_memory, NULL); lmb_enforce_memory_limit(memory_limit); lmb_analyze(); -#ifdef CONFIG_PPC64 - systemcfg->physicalMemorySize = lmb_phys_mem_size(); -#endif lmb_reserve(0, __pa(klimit)); DBG("Phys. mem: %lx\n", lmb_phys_mem_size()); @@ -1363,10 +1344,10 @@ void __init early_init_devtree(void *params) DBG("Scanning CPUs ...\n"); - /* Retreive hash table size from flattened tree plus other - * CPU related informations (altivec support, boot CPU ID, ...) + /* Retreive CPU related informations from the flat tree + * (altivec support, boot CPU ID, ...) */ - scan_flat_dt(early_init_dt_scan_cpus, NULL); + of_scan_flat_dt(early_init_dt_scan_cpus, NULL); DBG(" <- early_init_devtree()\n"); } @@ -1920,7 +1901,7 @@ static int of_finish_dynamic_node(struct device_node *node, /* We don't support that function on PowerMac, at least * not yet */ - if (systemcfg->platform == PLATFORM_POWERMAC) + if (_machine == PLATFORM_POWERMAC) return -ENODEV; /* fix up new node's linux_phandle field */ @@ -1986,14 +1967,31 @@ EXPORT_SYMBOL(get_property); /* * Add a property to a node */ -void prom_add_property(struct device_node* np, struct property* prop) +int prom_add_property(struct device_node* np, struct property* prop) { - struct property **next = &np->properties; + struct property **next; prop->next = NULL; - while (*next) + write_lock(&devtree_lock); + next = &np->properties; + while (*next) { + if (strcmp(prop->name, (*next)->name) == 0) { + /* duplicate ! don't insert it */ + write_unlock(&devtree_lock); + return -1; + } next = &(*next)->next; + } *next = prop; + write_unlock(&devtree_lock); + +#ifdef CONFIG_PROC_DEVICETREE + /* try to add to proc as well if it was initialized */ + if (np->pde) + proc_device_tree_add_prop(np->pde, prop); +#endif /* CONFIG_PROC_DEVICETREE */ + + return 0; } /* I quickly hacked that one, check against spec ! */ diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 9750b3c..4ce0105 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -94,11 +94,17 @@ extern const struct linux_logo logo_linux_clut224; #ifdef CONFIG_PPC64 #define RELOC(x) (*PTRRELOC(&(x))) #define ADDR(x) (u32) add_reloc_offset((unsigned long)(x)) +#define OF_WORKAROUNDS 0 #else #define RELOC(x) (x) #define ADDR(x) (u32) (x) +#define OF_WORKAROUNDS of_workarounds +int of_workarounds; #endif +#define OF_WA_CLAIM 1 /* do phys/virt claim separately, then map */ +#define OF_WA_LONGTRAIL 2 /* work around longtrail bugs */ + #define PROM_BUG() do { \ prom_printf("kernel BUG at %s line 0x%x!\n", \ RELOC(__FILE__), __LINE__); \ @@ -111,11 +117,6 @@ extern const struct linux_logo logo_linux_clut224; #define prom_debug(x...) #endif -#ifdef CONFIG_PPC32 -#define PLATFORM_POWERMAC _MACH_Pmac -#define PLATFORM_CHRP _MACH_chrp -#endif - typedef u32 prom_arg_t; @@ -128,10 +129,11 @@ struct prom_args { struct prom_t { ihandle root; - ihandle chosen; + phandle chosen; int cpu; ihandle stdout; ihandle mmumap; + ihandle memory; }; struct mem_map_entry { @@ -360,16 +362,36 @@ static void __init prom_printf(const char *format, ...) static unsigned int __init prom_claim(unsigned long virt, unsigned long size, unsigned long align) { - int ret; struct prom_t *_prom = &RELOC(prom); - ret = call_prom("claim", 3, 1, (prom_arg_t)virt, (prom_arg_t)size, - (prom_arg_t)align); - if (ret != -1 && _prom->mmumap != 0) - /* old pmacs need us to map as well */ + if (align == 0 && (OF_WORKAROUNDS & OF_WA_CLAIM)) { + /* + * Old OF requires we claim physical and virtual separately + * and then map explicitly (assuming virtual mode) + */ + int ret; + prom_arg_t result; + + ret = call_prom_ret("call-method", 5, 2, &result, + ADDR("claim"), _prom->memory, + align, size, virt); + if (ret != 0 || result == -1) + return -1; + ret = call_prom_ret("call-method", 5, 2, &result, + ADDR("claim"), _prom->mmumap, + align, size, virt); + if (ret != 0) { + call_prom("call-method", 4, 1, ADDR("release"), + _prom->memory, size, virt); + return -1; + } + /* the 0x12 is M (coherence) + PP == read/write */ call_prom("call-method", 6, 1, - ADDR("map"), _prom->mmumap, 0, size, virt, virt); - return ret; + ADDR("map"), _prom->mmumap, 0x12, size, virt, virt); + return virt; + } + return call_prom("claim", 3, 1, (prom_arg_t)virt, (prom_arg_t)size, + (prom_arg_t)align); } static void __init __attribute__((noreturn)) prom_panic(const char *reason) @@ -403,23 +425,64 @@ static int __init prom_next_node(phandle *nodep) } } -static int __init prom_getprop(phandle node, const char *pname, +static int inline prom_getprop(phandle node, const char *pname, void *value, size_t valuelen) { return call_prom("getprop", 4, 1, node, ADDR(pname), (u32)(unsigned long) value, (u32) valuelen); } -static int __init prom_getproplen(phandle node, const char *pname) +static int inline prom_getproplen(phandle node, const char *pname) { return call_prom("getproplen", 2, 1, node, ADDR(pname)); } -static int __init prom_setprop(phandle node, const char *pname, - void *value, size_t valuelen) +static void add_string(char **str, const char *q) { - return call_prom("setprop", 4, 1, node, ADDR(pname), - (u32)(unsigned long) value, (u32) valuelen); + char *p = *str; + + while (*q) + *p++ = *q++; + *p++ = ' '; + *str = p; +} + +static char *tohex(unsigned int x) +{ + static char digits[] = "0123456789abcdef"; + static char result[9]; + int i; + + result[8] = 0; + i = 8; + do { + --i; + result[i] = digits[x & 0xf]; + x >>= 4; + } while (x != 0 && i > 0); + return &result[i]; +} + +static int __init prom_setprop(phandle node, const char *nodename, + const char *pname, void *value, size_t valuelen) +{ + char cmd[256], *p; + + if (!(OF_WORKAROUNDS & OF_WA_LONGTRAIL)) + return call_prom("setprop", 4, 1, node, ADDR(pname), + (u32)(unsigned long) value, (u32) valuelen); + + /* gah... setprop doesn't work on longtrail, have to use interpret */ + p = cmd; + add_string(&p, "dev"); + add_string(&p, nodename); + add_string(&p, tohex((u32)(unsigned long) value)); + add_string(&p, tohex(valuelen)); + add_string(&p, tohex(ADDR(pname))); + add_string(&p, tohex(strlen(RELOC(pname)))); + add_string(&p, "property"); + *p = 0; + return call_prom("interpret", 1, 1, (u32)(unsigned long) cmd); } /* We can't use the standard versions because of RELOC headaches. */ @@ -980,7 +1043,7 @@ static void __init prom_instantiate_rtas(void) rtas_inst = call_prom("open", 1, 1, ADDR("/rtas")); if (!IHANDLE_VALID(rtas_inst)) { - prom_printf("opening rtas package failed"); + prom_printf("opening rtas package failed (%x)\n", rtas_inst); return; } @@ -988,7 +1051,7 @@ static void __init prom_instantiate_rtas(void) if (call_prom_ret("call-method", 3, 2, &entry, ADDR("instantiate-rtas"), - rtas_inst, base) == PROM_ERROR + rtas_inst, base) != 0 || entry == 0) { prom_printf(" failed\n"); return; @@ -997,8 +1060,10 @@ static void __init prom_instantiate_rtas(void) reserve_mem(base, size); - prom_setprop(rtas_node, "linux,rtas-base", &base, sizeof(base)); - prom_setprop(rtas_node, "linux,rtas-entry", &entry, sizeof(entry)); + prom_setprop(rtas_node, "/rtas", "linux,rtas-base", + &base, sizeof(base)); + prom_setprop(rtas_node, "/rtas", "linux,rtas-entry", + &entry, sizeof(entry)); prom_debug("rtas base = 0x%x\n", base); prom_debug("rtas entry = 0x%x\n", entry); @@ -1089,10 +1154,6 @@ static void __init prom_initialize_tce_table(void) if (base < local_alloc_bottom) local_alloc_bottom = base; - /* Save away the TCE table attributes for later use. */ - prom_setprop(node, "linux,tce-base", &base, sizeof(base)); - prom_setprop(node, "linux,tce-size", &minsize, sizeof(minsize)); - /* It seems OF doesn't null-terminate the path :-( */ memset(path, 0, sizeof(path)); /* Call OF to setup the TCE hardware */ @@ -1101,6 +1162,10 @@ static void __init prom_initialize_tce_table(void) prom_printf("package-to-path failed\n"); } + /* Save away the TCE table attributes for later use. */ + prom_setprop(node, path, "linux,tce-base", &base, sizeof(base)); + prom_setprop(node, path, "linux,tce-size", &minsize, sizeof(minsize)); + prom_debug("TCE table: %s\n", path); prom_debug("\tnode = 0x%x\n", node); prom_debug("\tbase = 0x%x\n", base); @@ -1342,6 +1407,7 @@ static void __init prom_init_client_services(unsigned long pp) /* * For really old powermacs, we need to map things we claim. * For that, we need the ihandle of the mmu. + * Also, on the longtrail, we need to work around other bugs. */ static void __init prom_find_mmu(void) { @@ -1355,12 +1421,19 @@ static void __init prom_find_mmu(void) if (prom_getprop(oprom, "model", version, sizeof(version)) <= 0) return; version[sizeof(version) - 1] = 0; - prom_printf("OF version is '%s'\n", version); /* XXX might need to add other versions here */ - if (strcmp(version, "Open Firmware, 1.0.5") != 0) + if (strcmp(version, "Open Firmware, 1.0.5") == 0) + of_workarounds = OF_WA_CLAIM; + else if (strncmp(version, "FirmWorks,3.", 12) == 0) { + of_workarounds = OF_WA_CLAIM | OF_WA_LONGTRAIL; + call_prom("interpret", 1, 1, "dev /memory 0 to allow-reclaim"); + } else return; + _prom->memory = call_prom("open", 1, 1, ADDR("/memory")); prom_getprop(_prom->chosen, "mmu", &_prom->mmumap, sizeof(_prom->mmumap)); + if (!IHANDLE_VALID(_prom->memory) || !IHANDLE_VALID(_prom->mmumap)) + of_workarounds &= ~OF_WA_CLAIM; /* hmmm */ } #else #define prom_find_mmu() @@ -1382,16 +1455,17 @@ static void __init prom_init_stdout(void) memset(path, 0, 256); call_prom("instance-to-path", 3, 1, _prom->stdout, path, 255); val = call_prom("instance-to-package", 1, 1, _prom->stdout); - prom_setprop(_prom->chosen, "linux,stdout-package", &val, sizeof(val)); + prom_setprop(_prom->chosen, "/chosen", "linux,stdout-package", + &val, sizeof(val)); prom_printf("OF stdout device is: %s\n", RELOC(of_stdout_device)); - prom_setprop(_prom->chosen, "linux,stdout-path", - RELOC(of_stdout_device), strlen(RELOC(of_stdout_device))+1); + prom_setprop(_prom->chosen, "/chosen", "linux,stdout-path", + path, strlen(path) + 1); /* If it's a display, note it */ memset(type, 0, sizeof(type)); prom_getprop(val, "device_type", type, sizeof(type)); if (strcmp(type, RELOC("display")) == 0) - prom_setprop(val, "linux,boot-display", NULL, 0); + prom_setprop(val, path, "linux,boot-display", NULL, 0); } static void __init prom_close_stdin(void) @@ -1408,8 +1482,9 @@ static int __init prom_find_machine_type(void) struct prom_t *_prom = &RELOC(prom); char compat[256]; int len, i = 0; +#ifdef CONFIG_PPC64 phandle rtas; - +#endif len = prom_getprop(_prom->root, "compatible", compat, sizeof(compat)-1); if (len > 0) { @@ -1513,7 +1588,7 @@ static void __init prom_check_displays(void) /* Success */ prom_printf("done\n"); - prom_setprop(node, "linux,opened", NULL, 0); + prom_setprop(node, path, "linux,opened", NULL, 0); /* Setup a usable color table when the appropriate * method is available. Should update this to set-colors */ @@ -1872,7 +1947,7 @@ static void __init fixup_device_tree(void) if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev)) == PROM_ERROR) return; - if (u3_rev != 0x35 && u3_rev != 0x37) + if (u3_rev < 0x35 || u3_rev > 0x39) return; /* does it need fixup ? */ if (prom_getproplen(i2c, "interrupts") > 0) @@ -1883,9 +1958,11 @@ static void __init fixup_device_tree(void) /* interrupt on this revision of u3 is number 0 and level */ interrupts[0] = 0; interrupts[1] = 1; - prom_setprop(i2c, "interrupts", &interrupts, sizeof(interrupts)); + prom_setprop(i2c, "/u3@0,f8000000/i2c@f8001000", "interrupts", + &interrupts, sizeof(interrupts)); parent = (u32)mpic; - prom_setprop(i2c, "interrupt-parent", &parent, sizeof(parent)); + prom_setprop(i2c, "/u3@0,f8000000/i2c@f8001000", "interrupt-parent", + &parent, sizeof(parent)); #endif } @@ -1921,11 +1998,11 @@ static void __init prom_check_initrd(unsigned long r3, unsigned long r4) RELOC(prom_initrd_end) = RELOC(prom_initrd_start) + r4; val = RELOC(prom_initrd_start); - prom_setprop(_prom->chosen, "linux,initrd-start", &val, - sizeof(val)); + prom_setprop(_prom->chosen, "/chosen", "linux,initrd-start", + &val, sizeof(val)); val = RELOC(prom_initrd_end); - prom_setprop(_prom->chosen, "linux,initrd-end", &val, - sizeof(val)); + prom_setprop(_prom->chosen, "/chosen", "linux,initrd-end", + &val, sizeof(val)); reserve_mem(RELOC(prom_initrd_start), RELOC(prom_initrd_end) - RELOC(prom_initrd_start)); @@ -1968,14 +2045,15 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, prom_init_client_services(pp); /* - * Init prom stdout device + * See if this OF is old enough that we need to do explicit maps + * and other workarounds */ - prom_init_stdout(); + prom_find_mmu(); /* - * See if this OF is old enough that we need to do explicit maps + * Init prom stdout device */ - prom_find_mmu(); + prom_init_stdout(); /* * Check for an initrd @@ -1988,19 +2066,20 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, */ RELOC(of_platform) = prom_find_machine_type(); getprop_rval = RELOC(of_platform); - prom_setprop(_prom->chosen, "linux,platform", + prom_setprop(_prom->chosen, "/chosen", "linux,platform", &getprop_rval, sizeof(getprop_rval)); #ifdef CONFIG_PPC_PSERIES /* * On pSeries, inform the firmware about our capabilities */ - if (RELOC(of_platform) & PLATFORM_PSERIES) + if (RELOC(of_platform) == PLATFORM_PSERIES || + RELOC(of_platform) == PLATFORM_PSERIES_LPAR) prom_send_capabilities(); #endif /* - * On pSeries and BPA, copy the CPU hold code + * Copy the CPU hold code */ if (RELOC(of_platform) != PLATFORM_POWERMAC) copy_and_flush(0, KERNELBASE + offset, 0x100, 0); @@ -2049,21 +2128,23 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, * Fill in some infos for use by the kernel later on */ if (RELOC(prom_memory_limit)) - prom_setprop(_prom->chosen, "linux,memory-limit", + prom_setprop(_prom->chosen, "/chosen", "linux,memory-limit", &RELOC(prom_memory_limit), sizeof(prom_memory_limit)); #ifdef CONFIG_PPC64 if (RELOC(ppc64_iommu_off)) - prom_setprop(_prom->chosen, "linux,iommu-off", NULL, 0); + prom_setprop(_prom->chosen, "/chosen", "linux,iommu-off", + NULL, 0); if (RELOC(iommu_force_on)) - prom_setprop(_prom->chosen, "linux,iommu-force-on", NULL, 0); + prom_setprop(_prom->chosen, "/chosen", "linux,iommu-force-on", + NULL, 0); if (RELOC(prom_tce_alloc_start)) { - prom_setprop(_prom->chosen, "linux,tce-alloc-start", + prom_setprop(_prom->chosen, "/chosen", "linux,tce-alloc-start", &RELOC(prom_tce_alloc_start), sizeof(prom_tce_alloc_start)); - prom_setprop(_prom->chosen, "linux,tce-alloc-end", + prom_setprop(_prom->chosen, "/chosen", "linux,tce-alloc-end", &RELOC(prom_tce_alloc_end), sizeof(prom_tce_alloc_end)); } @@ -2080,8 +2161,13 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, prom_printf("copying OF device tree ...\n"); flatten_device_tree(); - /* in case stdin is USB and still active on IBM machines... */ - prom_close_stdin(); + /* + * in case stdin is USB and still active on IBM machines... + * Unfortunately quiesce crashes on some powermacs if we have + * closed stdin already (in particular the powerbook 101). + */ + if (RELOC(of_platform) != PLATFORM_POWERMAC) + prom_close_stdin(); /* * Call OF "quiesce" method to shut down pending DMA's from diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 568ea33..3d2abd9 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -248,46 +248,10 @@ void ptrace_disable(struct task_struct *child) clear_single_step(child); } -long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret = -EPERM; - lock_kernel(); - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -540,10 +504,7 @@ long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + return ret; } diff --git a/arch/ppc64/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c index 5bdd5b0..ae1a364 100644 --- a/arch/ppc64/kernel/rtas-proc.c +++ b/arch/powerpc/kernel/rtas-proc.c @@ -259,7 +259,7 @@ static int __init proc_rtas_init(void) { struct proc_dir_entry *entry; - if (!(systemcfg->platform & PLATFORM_PSERIES)) + if (_machine != PLATFORM_PSERIES && _machine != PLATFORM_PSERIES_LPAR) return 1; rtas_node = of_find_node_by_name(NULL, "rtas"); diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 4d22eee..4283fa3 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -17,6 +17,7 @@ #include <linux/spinlock.h> #include <linux/module.h> #include <linux/init.h> +#include <linux/delay.h> #include <asm/prom.h> #include <asm/rtas.h> @@ -28,9 +29,6 @@ #include <asm/delay.h> #include <asm/uaccess.h> #include <asm/lmb.h> -#ifdef CONFIG_PPC64 -#include <asm/systemcfg.h> -#endif struct rtas_t rtas = { .lock = SPIN_LOCK_UNLOCKED @@ -43,6 +41,13 @@ char rtas_data_buf[RTAS_DATA_BUF_SIZE] __cacheline_aligned; unsigned long rtas_rmo_buf; /* + * If non-NULL, this gets called when the kernel terminates. + * This is done like this so rtas_flash can be a module. + */ +void (*rtas_flash_term_hook)(int); +EXPORT_SYMBOL(rtas_flash_term_hook); + +/* * call_rtas_display_status and call_rtas_display_status_delay * are designed only for very early low-level debugging, which * is why the token is hard-coded to 10. @@ -76,7 +81,7 @@ void call_rtas_display_status_delay(unsigned char c) while (width-- > 0) call_rtas_display_status(' '); width = 16; - udelay(500000); + mdelay(500); pending_newline = 1; } else { if (pending_newline) { @@ -206,6 +211,7 @@ void rtas_progress(char *s, unsigned short hex) spin_unlock(&progress_lock); } +EXPORT_SYMBOL(rtas_progress); /* needed by rtas_flash module */ int rtas_token(const char *service) { @@ -492,6 +498,8 @@ int rtas_set_indicator(int indicator, int index, int new_value) void rtas_restart(char *cmd) { + if (rtas_flash_term_hook) + rtas_flash_term_hook(SYS_RESTART); printk("RTAS system-reboot returned %d\n", rtas_call(rtas_token("system-reboot"), 0, 1, NULL)); for (;;); @@ -499,6 +507,8 @@ void rtas_restart(char *cmd) void rtas_power_off(void) { + if (rtas_flash_term_hook) + rtas_flash_term_hook(SYS_POWER_OFF); /* allow power on only with power button press */ printk("RTAS power-off returned %d\n", rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1)); @@ -507,7 +517,12 @@ void rtas_power_off(void) void rtas_halt(void) { - rtas_power_off(); + if (rtas_flash_term_hook) + rtas_flash_term_hook(SYS_HALT); + /* allow power on only with power button press */ + printk("RTAS power-off returned %d\n", + rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1)); + for (;;); } /* Must be in the RMO region, so we place it here */ @@ -591,7 +606,6 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs) return 0; } -#ifdef CONFIG_SMP /* This version can't take the spinlock, because it never returns */ struct rtas_args rtas_stop_self_args = { @@ -616,7 +630,6 @@ void rtas_stop_self(void) panic("Alas, I survived.\n"); } -#endif /* * Call early during boot, before mem init or bootmem, to retreive the RTAS @@ -655,7 +668,7 @@ void __init rtas_initialize(void) * the stop-self token if any */ #ifdef CONFIG_PPC64 - if (systemcfg->platform == PLATFORM_PSERIES_LPAR) + if (_machine == PLATFORM_PSERIES_LPAR) rtas_region = min(lmb.rmo_size, RTAS_INSTANTIATE_MAX); #endif rtas_rmo_buf = lmb_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region); diff --git a/arch/ppc64/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c index 923e2e2..5050009 100644 --- a/arch/ppc64/kernel/rtas_flash.c +++ b/arch/powerpc/kernel/rtas_flash.c @@ -19,6 +19,7 @@ #include <asm/delay.h> #include <asm/uaccess.h> #include <asm/rtas.h> +#include <asm/abs_addr.h> #define MODULE_VERS "1.0" #define MODULE_NAME "rtas_flash" @@ -71,10 +72,36 @@ #define VALIDATE_BUF_SIZE 4096 #define RTAS_MSG_MAXLEN 64 +struct flash_block { + char *data; + unsigned long length; +}; + +/* This struct is very similar but not identical to + * that needed by the rtas flash update. + * All we need to do for rtas is rewrite num_blocks + * into a version/length and translate the pointers + * to absolute. + */ +#define FLASH_BLOCKS_PER_NODE ((PAGE_SIZE - 16) / sizeof(struct flash_block)) +struct flash_block_list { + unsigned long num_blocks; + struct flash_block_list *next; + struct flash_block blocks[FLASH_BLOCKS_PER_NODE]; +}; +struct flash_block_list_header { /* just the header of flash_block_list */ + unsigned long num_blocks; + struct flash_block_list *next; +}; + +static struct flash_block_list_header rtas_firmware_flash_list = {0, NULL}; + +#define FLASH_BLOCK_LIST_VERSION (1UL) + /* Local copy of the flash block list. * We only allow one open of the flash proc file and create this - * list as we go. This list will be put in the kernel's - * rtas_firmware_flash_list global var once it is fully read. + * list as we go. This list will be put in the + * rtas_firmware_flash_list var once it is fully read. * * For convenience as we build the list we use virtual addrs, * we do not fill in the version number, and the length field @@ -562,6 +589,86 @@ static int validate_flash_release(struct inode *inode, struct file *file) return 0; } +static void rtas_flash_firmware(int reboot_type) +{ + unsigned long image_size; + struct flash_block_list *f, *next, *flist; + unsigned long rtas_block_list; + int i, status, update_token; + + if (rtas_firmware_flash_list.next == NULL) + return; /* nothing to do */ + + if (reboot_type != SYS_RESTART) { + printk(KERN_ALERT "FLASH: firmware flash requires a reboot\n"); + printk(KERN_ALERT "FLASH: the firmware image will NOT be flashed\n"); + return; + } + + update_token = rtas_token("ibm,update-flash-64-and-reboot"); + if (update_token == RTAS_UNKNOWN_SERVICE) { + printk(KERN_ALERT "FLASH: ibm,update-flash-64-and-reboot " + "is not available -- not a service partition?\n"); + printk(KERN_ALERT "FLASH: firmware will not be flashed\n"); + return; + } + + /* NOTE: the "first" block list is a global var with no data + * blocks in the kernel data segment. We do this because + * we want to ensure this block_list addr is under 4GB. + */ + rtas_firmware_flash_list.num_blocks = 0; + flist = (struct flash_block_list *)&rtas_firmware_flash_list; + rtas_block_list = virt_to_abs(flist); + if (rtas_block_list >= 4UL*1024*1024*1024) { + printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n"); + return; + } + + printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n"); + /* Update the block_list in place. */ + image_size = 0; + for (f = flist; f; f = next) { + /* Translate data addrs to absolute */ + for (i = 0; i < f->num_blocks; i++) { + f->blocks[i].data = (char *)virt_to_abs(f->blocks[i].data); + image_size += f->blocks[i].length; + } + next = f->next; + /* Don't translate NULL pointer for last entry */ + if (f->next) + f->next = (struct flash_block_list *)virt_to_abs(f->next); + else + f->next = NULL; + /* make num_blocks into the version/length field */ + f->num_blocks = (FLASH_BLOCK_LIST_VERSION << 56) | ((f->num_blocks+1)*16); + } + + printk(KERN_ALERT "FLASH: flash image is %ld bytes\n", image_size); + printk(KERN_ALERT "FLASH: performing flash and reboot\n"); + rtas_progress("Flashing \n", 0x0); + rtas_progress("Please Wait... ", 0x0); + printk(KERN_ALERT "FLASH: this will take several minutes. Do not power off!\n"); + status = rtas_call(update_token, 1, 1, NULL, rtas_block_list); + switch (status) { /* should only get "bad" status */ + case 0: + printk(KERN_ALERT "FLASH: success\n"); + break; + case -1: + printk(KERN_ALERT "FLASH: hardware error. Firmware may not be not flashed\n"); + break; + case -3: + printk(KERN_ALERT "FLASH: image is corrupt or not correct for this platform. Firmware not flashed\n"); + break; + case -4: + printk(KERN_ALERT "FLASH: flash failed when partially complete. System may not reboot\n"); + break; + default: + printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status); + break; + } +} + static void remove_flash_pde(struct proc_dir_entry *dp) { if (dp) { @@ -701,6 +808,7 @@ int __init rtas_flash_init(void) if (rc != 0) goto cleanup; + rtas_flash_term_hook = rtas_flash_firmware; return 0; cleanup: @@ -714,6 +822,7 @@ cleanup: void __exit rtas_flash_cleanup(void) { + rtas_flash_term_hook = NULL; remove_flash_pde(firmware_flash_pde); remove_flash_pde(firmware_update_pde); remove_flash_pde(validate_pde); diff --git a/arch/ppc64/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c index 3ad15c9..0e5a8e1 100644 --- a/arch/ppc64/kernel/rtas_pci.c +++ b/arch/powerpc/kernel/rtas_pci.c @@ -5,19 +5,19 @@ * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM * * RTAS specific routines for PCI. - * + * * Based on code from pci.c, chrp_pci.c and pSeries_pci.c * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * + * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA @@ -47,7 +47,7 @@ static int write_pci_config; static int ibm_read_pci_config; static int ibm_write_pci_config; -static int config_access_valid(struct pci_dn *dn, int where) +static inline int config_access_valid(struct pci_dn *dn, int where) { if (where < 256) return 1; @@ -72,16 +72,14 @@ static int of_device_available(struct device_node * dn) return 0; } -static int rtas_read_config(struct device_node *dn, int where, int size, u32 *val) +static int rtas_read_config(struct pci_dn *pdn, int where, int size, u32 *val) { int returnval = -1; unsigned long buid, addr; int ret; - struct pci_dn *pdn; - if (!dn || !dn->data) + if (!pdn) return PCIBIOS_DEVICE_NOT_FOUND; - pdn = dn->data; if (!config_access_valid(pdn, where)) return PCIBIOS_BAD_REGISTER_NUMBER; @@ -90,7 +88,7 @@ static int rtas_read_config(struct device_node *dn, int where, int size, u32 *va buid = pdn->phb->buid; if (buid) { ret = rtas_call(ibm_read_pci_config, 4, 2, &returnval, - addr, buid >> 32, buid & 0xffffffff, size); + addr, BUID_HI(buid), BUID_LO(buid), size); } else { ret = rtas_call(read_pci_config, 2, 2, &returnval, addr, size); } @@ -100,7 +98,7 @@ static int rtas_read_config(struct device_node *dn, int where, int size, u32 *va return PCIBIOS_DEVICE_NOT_FOUND; if (returnval == EEH_IO_ERROR_VALUE(size) && - eeh_dn_check_failure (dn, NULL)) + eeh_dn_check_failure (pdn->node, NULL)) return PCIBIOS_DEVICE_NOT_FOUND; return PCIBIOS_SUCCESSFUL; @@ -118,23 +116,23 @@ static int rtas_pci_read_config(struct pci_bus *bus, busdn = bus->sysdata; /* must be a phb */ /* Search only direct children of the bus */ - for (dn = busdn->child; dn; dn = dn->sibling) - if (dn->data && PCI_DN(dn)->devfn == devfn + for (dn = busdn->child; dn; dn = dn->sibling) { + struct pci_dn *pdn = PCI_DN(dn); + if (pdn && pdn->devfn == devfn && of_device_available(dn)) - return rtas_read_config(dn, where, size, val); + return rtas_read_config(pdn, where, size, val); + } return PCIBIOS_DEVICE_NOT_FOUND; } -int rtas_write_config(struct device_node *dn, int where, int size, u32 val) +int rtas_write_config(struct pci_dn *pdn, int where, int size, u32 val) { unsigned long buid, addr; int ret; - struct pci_dn *pdn; - if (!dn || !dn->data) + if (!pdn) return PCIBIOS_DEVICE_NOT_FOUND; - pdn = dn->data; if (!config_access_valid(pdn, where)) return PCIBIOS_BAD_REGISTER_NUMBER; @@ -142,7 +140,8 @@ int rtas_write_config(struct device_node *dn, int where, int size, u32 val) (pdn->devfn << 8) | (where & 0xff); buid = pdn->phb->buid; if (buid) { - ret = rtas_call(ibm_write_pci_config, 5, 1, NULL, addr, buid >> 32, buid & 0xffffffff, size, (ulong) val); + ret = rtas_call(ibm_write_pci_config, 5, 1, NULL, addr, + BUID_HI(buid), BUID_LO(buid), size, (ulong) val); } else { ret = rtas_call(write_pci_config, 3, 1, NULL, addr, size, (ulong)val); } @@ -165,10 +164,12 @@ static int rtas_pci_write_config(struct pci_bus *bus, busdn = bus->sysdata; /* must be a phb */ /* Search only direct children of the bus */ - for (dn = busdn->child; dn; dn = dn->sibling) - if (dn->data && PCI_DN(dn)->devfn == devfn + for (dn = busdn->child; dn; dn = dn->sibling) { + struct pci_dn *pdn = PCI_DN(dn); + if (pdn && pdn->devfn == devfn && of_device_available(dn)) - return rtas_write_config(dn, where, size, val); + return rtas_write_config(pdn, where, size, val); + } return PCIBIOS_DEVICE_NOT_FOUND; } @@ -221,7 +222,7 @@ static void python_countermeasures(struct device_node *dev, /* Python's register file is 1 MB in size. */ chip_regs = ioremap(reg_struct.address & ~(0xfffffUL), 0x100000); - /* + /* * Firmware doesn't always clear this bit which is critical * for good performance - Anton */ @@ -292,7 +293,7 @@ static int phb_set_bus_ranges(struct device_node *dev, if (bus_range == NULL || len < 2 * sizeof(int)) { return 1; } - + phb->first_busno = bus_range[0]; phb->last_busno = bus_range[1]; @@ -440,7 +441,6 @@ struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) struct device_node *root = of_find_node_by_path("/"); unsigned int root_size_cells = 0; struct pci_controller *phb; - struct pci_bus *bus; int primary; root_size_cells = prom_n_size_cells(root); @@ -456,10 +456,7 @@ struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) of_node_put(root); pci_devs_phb_init_dynamic(phb); - phb->last_busno = 0xff; - bus = pci_scan_bus(phb->first_busno, phb->ops, phb->arch_data); - phb->bus = bus; - phb->last_busno = bus->subordinate; + scan_phb(phb); return phb; } diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 1292460..bae4bff 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -33,6 +33,7 @@ #include <asm/io.h> #include <asm/prom.h> #include <asm/processor.h> +#include <asm/systemcfg.h> #include <asm/pgtable.h> #include <asm/smp.h> #include <asm/elf.h> @@ -51,6 +52,9 @@ #include <asm/page.h> #include <asm/mmu.h> #include <asm/lmb.h> +#include <asm/xmon.h> + +#include "setup.h" #undef DEBUG @@ -60,6 +64,13 @@ #define DBG(fmt...) #endif +#ifdef CONFIG_PPC_MULTIPLATFORM +int _machine = 0; +EXPORT_SYMBOL(_machine); +#endif + +unsigned long klimit = (unsigned long) _end; + /* * This still seems to be needed... -- paulus */ @@ -170,12 +181,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) } #ifdef CONFIG_SMP -#ifdef CONFIG_PPC64 /* XXX for now */ pvr = per_cpu(pvr, cpu_id); #else - pvr = cpu_data[cpu_id].pvr; -#endif -#else pvr = mfspr(SPRN_PVR); #endif maj = (pvr >> 8) & 0xFF; @@ -201,11 +208,11 @@ static int show_cpuinfo(struct seq_file *m, void *v) #ifdef CONFIG_TAU_AVERAGE /* more straightforward, but potentially misleading */ seq_printf(m, "temperature \t: %u C (uncalibrated)\n", - cpu_temp(i)); + cpu_temp(cpu_id)); #else /* show the actual temp sensor range */ u32 temp; - temp = cpu_temp_both(i); + temp = cpu_temp_both(cpu_id); seq_printf(m, "temperature \t: %u-%u C (uncalibrated)\n", temp & 0xff, temp >> 16); #endif @@ -408,3 +415,178 @@ static int __init set_preferred_console(void) } console_initcall(set_preferred_console); #endif /* CONFIG_PPC_MULTIPLATFORM */ + +void __init check_for_initrd(void) +{ +#ifdef CONFIG_BLK_DEV_INITRD + unsigned long *prop; + + DBG(" -> check_for_initrd()\n"); + + if (of_chosen) { + prop = (unsigned long *)get_property(of_chosen, + "linux,initrd-start", NULL); + if (prop != NULL) { + initrd_start = (unsigned long)__va(*prop); + prop = (unsigned long *)get_property(of_chosen, + "linux,initrd-end", NULL); + if (prop != NULL) { + initrd_end = (unsigned long)__va(*prop); + initrd_below_start_ok = 1; + } else + initrd_start = 0; + } + } + + /* If we were passed an initrd, set the ROOT_DEV properly if the values + * look sensible. If not, clear initrd reference. + */ + if (initrd_start >= KERNELBASE && initrd_end >= KERNELBASE && + initrd_end > initrd_start) + ROOT_DEV = Root_RAM0; + else { + printk("Bogus initrd %08lx %08lx\n", initrd_start, initrd_end); + initrd_start = initrd_end = 0; + } + + if (initrd_start) + printk("Found initrd at 0x%lx:0x%lx\n", initrd_start, initrd_end); + + DBG(" <- check_for_initrd()\n"); +#endif /* CONFIG_BLK_DEV_INITRD */ +} + +#ifdef CONFIG_SMP + +/** + * setup_cpu_maps - initialize the following cpu maps: + * cpu_possible_map + * cpu_present_map + * cpu_sibling_map + * + * Having the possible map set up early allows us to restrict allocations + * of things like irqstacks to num_possible_cpus() rather than NR_CPUS. + * + * We do not initialize the online map here; cpus set their own bits in + * cpu_online_map as they come up. + * + * This function is valid only for Open Firmware systems. finish_device_tree + * must be called before using this. + * + * While we're here, we may as well set the "physical" cpu ids in the paca. + */ +void __init smp_setup_cpu_maps(void) +{ + struct device_node *dn = NULL; + int cpu = 0; + int swap_cpuid = 0; + + while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) { + int *intserv; + int j, len = sizeof(u32), nthreads = 1; + + intserv = (int *)get_property(dn, "ibm,ppc-interrupt-server#s", + &len); + if (intserv) + nthreads = len / sizeof(int); + else { + intserv = (int *) get_property(dn, "reg", NULL); + if (!intserv) + intserv = &cpu; /* assume logical == phys */ + } + + for (j = 0; j < nthreads && cpu < NR_CPUS; j++) { + cpu_set(cpu, cpu_present_map); + set_hard_smp_processor_id(cpu, intserv[j]); + + if (intserv[j] == boot_cpuid_phys) + swap_cpuid = cpu; + cpu_set(cpu, cpu_possible_map); + cpu++; + } + } + + /* Swap CPU id 0 with boot_cpuid_phys, so we can always assume that + * boot cpu is logical 0. + */ + if (boot_cpuid_phys != get_hard_smp_processor_id(0)) { + u32 tmp; + tmp = get_hard_smp_processor_id(0); + set_hard_smp_processor_id(0, boot_cpuid_phys); + set_hard_smp_processor_id(swap_cpuid, tmp); + } + +#ifdef CONFIG_PPC64 + /* + * On pSeries LPAR, we need to know how many cpus + * could possibly be added to this partition. + */ + if (_machine == PLATFORM_PSERIES_LPAR && + (dn = of_find_node_by_path("/rtas"))) { + int num_addr_cell, num_size_cell, maxcpus; + unsigned int *ireg; + + num_addr_cell = prom_n_addr_cells(dn); + num_size_cell = prom_n_size_cells(dn); + + ireg = (unsigned int *) + get_property(dn, "ibm,lrdr-capacity", NULL); + + if (!ireg) + goto out; + + maxcpus = ireg[num_addr_cell + num_size_cell]; + + /* Double maxcpus for processors which have SMT capability */ + if (cpu_has_feature(CPU_FTR_SMT)) + maxcpus *= 2; + + if (maxcpus > NR_CPUS) { + printk(KERN_WARNING + "Partition configured for %d cpus, " + "operating system maximum is %d.\n", + maxcpus, NR_CPUS); + maxcpus = NR_CPUS; + } else + printk(KERN_INFO "Partition configured for %d cpus.\n", + maxcpus); + + for (cpu = 0; cpu < maxcpus; cpu++) + cpu_set(cpu, cpu_possible_map); + out: + of_node_put(dn); + } + + /* + * Do the sibling map; assume only two threads per processor. + */ + for_each_cpu(cpu) { + cpu_set(cpu, cpu_sibling_map[cpu]); + if (cpu_has_feature(CPU_FTR_SMT)) + cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]); + } + + _systemcfg->processorCount = num_present_cpus(); +#endif /* CONFIG_PPC64 */ +} +#endif /* CONFIG_SMP */ + +#ifdef CONFIG_XMON +static int __init early_xmon(char *p) +{ + /* ensure xmon is enabled */ + if (p) { + if (strncmp(p, "on", 2) == 0) + xmon_init(1); + if (strncmp(p, "off", 3) == 0) + xmon_init(0); + if (strncmp(p, "early", 5) != 0) + return 0; + } + xmon_init(1); + debugger(NULL); + + return 0; +} +early_param("xmon", early_xmon); +#endif diff --git a/arch/powerpc/kernel/setup.h b/arch/powerpc/kernel/setup.h new file mode 100644 index 0000000..2ebba75 --- /dev/null +++ b/arch/powerpc/kernel/setup.h @@ -0,0 +1,6 @@ +#ifndef _POWERPC_KERNEL_SETUP_H +#define _POWERPC_KERNEL_SETUP_H + +void check_for_initrd(void); + +#endif /* _POWERPC_KERNEL_SETUP_H */ diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 9680ae9..c98cfcc 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -40,6 +40,8 @@ #include <asm/xmon.h> #include <asm/time.h> +#include "setup.h" + #define DBG(fmt...) #if defined CONFIG_KGDB @@ -70,8 +72,6 @@ unsigned int DMA_MODE_WRITE; int have_of = 1; #ifdef CONFIG_PPC_MULTIPLATFORM -int _machine = 0; - extern void prep_init(void); extern void pmac_init(void); extern void chrp_init(void); @@ -279,15 +279,17 @@ arch_initcall(ppc_init); /* Warning, IO base is not yet inited */ void __init setup_arch(char **cmdline_p) { - extern char *klimit; extern void do_init_bootmem(void); /* so udelay does something sensible, assume <= 1000 bogomips */ loops_per_jiffy = 500000000 / HZ; unflatten_device_tree(); + check_for_initrd(); finish_device_tree(); + smp_setup_cpu_maps(); + #ifdef CONFIG_BOOTX_TEXT init_boot_display(); #endif @@ -300,14 +302,9 @@ void __init setup_arch(char **cmdline_p) pmac_feature_init(); /* New cool way */ #endif -#ifdef CONFIG_XMON - xmon_map_scc(); - if (strstr(cmd_line, "xmon")) { - xmon_init(1); - debugger(NULL); - } -#endif /* CONFIG_XMON */ - if ( ppc_md.progress ) ppc_md.progress("setup_arch: enter", 0x3eab); +#ifdef CONFIG_XMON_DEFAULT + xmon_init(1); +#endif #if defined(CONFIG_KGDB) if (ppc_md.kgdb_map_scc) @@ -340,7 +337,7 @@ void __init setup_arch(char **cmdline_p) init_mm.start_code = PAGE_OFFSET; init_mm.end_code = (unsigned long) _etext; init_mm.end_data = (unsigned long) _edata; - init_mm.brk = (unsigned long) klimit; + init_mm.brk = klimit; /* Save unparsed command line copy for /proc/cmdline */ strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE); diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 40c4810..6791668 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -41,7 +41,6 @@ #include <asm/elf.h> #include <asm/machdep.h> #include <asm/paca.h> -#include <asm/ppcdebug.h> #include <asm/time.h> #include <asm/cputable.h> #include <asm/sections.h> @@ -56,10 +55,13 @@ #include <asm/page.h> #include <asm/mmu.h> #include <asm/lmb.h> -#include <asm/iSeries/ItLpNaca.h> +#include <asm/iseries/it_lp_naca.h> #include <asm/firmware.h> #include <asm/systemcfg.h> #include <asm/xmon.h> +#include <asm/udbg.h> + +#include "setup.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -94,17 +96,6 @@ extern void udbg_init_maple_realmode(void); do { udbg_putc = call_rtas_display_status_delay; } while(0) #endif -/* extern void *stab; */ -extern unsigned long klimit; - -extern void mm_init_ppc64(void); -extern void stab_initialize(unsigned long stab); -extern void htab_initialize(void); -extern void early_init_devtree(void *flat_dt); -extern void unflatten_device_tree(void); - -extern void smp_release_cpus(void); - int have_of = 1; int boot_cpuid = 0; int boot_cpuid_phys = 0; @@ -183,120 +174,14 @@ static int __init early_smt_enabled(char *p) } early_param("smt-enabled", early_smt_enabled); -/** - * setup_cpu_maps - initialize the following cpu maps: - * cpu_possible_map - * cpu_present_map - * cpu_sibling_map - * - * Having the possible map set up early allows us to restrict allocations - * of things like irqstacks to num_possible_cpus() rather than NR_CPUS. - * - * We do not initialize the online map here; cpus set their own bits in - * cpu_online_map as they come up. - * - * This function is valid only for Open Firmware systems. finish_device_tree - * must be called before using this. - * - * While we're here, we may as well set the "physical" cpu ids in the paca. - */ -static void __init setup_cpu_maps(void) -{ - struct device_node *dn = NULL; - int cpu = 0; - int swap_cpuid = 0; - - check_smt_enabled(); - - while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) { - u32 *intserv; - int j, len = sizeof(u32), nthreads; - - intserv = (u32 *)get_property(dn, "ibm,ppc-interrupt-server#s", - &len); - if (!intserv) - intserv = (u32 *)get_property(dn, "reg", NULL); - - nthreads = len / sizeof(u32); - - for (j = 0; j < nthreads && cpu < NR_CPUS; j++) { - cpu_set(cpu, cpu_present_map); - set_hard_smp_processor_id(cpu, intserv[j]); - - if (intserv[j] == boot_cpuid_phys) - swap_cpuid = cpu; - cpu_set(cpu, cpu_possible_map); - cpu++; - } - } - - /* Swap CPU id 0 with boot_cpuid_phys, so we can always assume that - * boot cpu is logical 0. - */ - if (boot_cpuid_phys != get_hard_smp_processor_id(0)) { - u32 tmp; - tmp = get_hard_smp_processor_id(0); - set_hard_smp_processor_id(0, boot_cpuid_phys); - set_hard_smp_processor_id(swap_cpuid, tmp); - } - - /* - * On pSeries LPAR, we need to know how many cpus - * could possibly be added to this partition. - */ - if (systemcfg->platform == PLATFORM_PSERIES_LPAR && - (dn = of_find_node_by_path("/rtas"))) { - int num_addr_cell, num_size_cell, maxcpus; - unsigned int *ireg; - - num_addr_cell = prom_n_addr_cells(dn); - num_size_cell = prom_n_size_cells(dn); - - ireg = (unsigned int *) - get_property(dn, "ibm,lrdr-capacity", NULL); - - if (!ireg) - goto out; - - maxcpus = ireg[num_addr_cell + num_size_cell]; - - /* Double maxcpus for processors which have SMT capability */ - if (cpu_has_feature(CPU_FTR_SMT)) - maxcpus *= 2; - - if (maxcpus > NR_CPUS) { - printk(KERN_WARNING - "Partition configured for %d cpus, " - "operating system maximum is %d.\n", - maxcpus, NR_CPUS); - maxcpus = NR_CPUS; - } else - printk(KERN_INFO "Partition configured for %d cpus.\n", - maxcpus); - - for (cpu = 0; cpu < maxcpus; cpu++) - cpu_set(cpu, cpu_possible_map); - out: - of_node_put(dn); - } - - /* - * Do the sibling map; assume only two threads per processor. - */ - for_each_cpu(cpu) { - cpu_set(cpu, cpu_sibling_map[cpu]); - if (cpu_has_feature(CPU_FTR_SMT)) - cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]); - } - - systemcfg->processorCount = num_present_cpus(); -} +#else +#define check_smt_enabled() #endif /* CONFIG_SMP */ extern struct machdep_calls pSeries_md; extern struct machdep_calls pmac_md; extern struct machdep_calls maple_md; -extern struct machdep_calls bpa_md; +extern struct machdep_calls cell_md; extern struct machdep_calls iseries_md; /* Ultimately, stuff them in an elf section like initcalls... */ @@ -310,8 +195,8 @@ static struct machdep_calls __initdata *machines[] = { #ifdef CONFIG_PPC_MAPLE &maple_md, #endif /* CONFIG_PPC_MAPLE */ -#ifdef CONFIG_PPC_BPA - &bpa_md, +#ifdef CONFIG_PPC_CELL + &cell_md, #endif #ifdef CONFIG_PPC_ISERIES &iseries_md, @@ -352,12 +237,6 @@ void __init early_setup(unsigned long dt_ptr) DBG(" -> early_setup()\n"); /* - * Fill the default DBG level (do we want to keep - * that old mecanism around forever ?) - */ - ppcdbg_initialize(); - - /* * Do early initializations using the flattened device * tree, like retreiving the physical memory map or * calculating/retreiving the hash table size @@ -368,11 +247,10 @@ void __init early_setup(unsigned long dt_ptr) * Iterate all ppc_md structures until we find the proper * one for the current machine type */ - DBG("Probing machine type for platform %x...\n", - systemcfg->platform); + DBG("Probing machine type for platform %x...\n", _machine); for (mach = machines; *mach; mach++) { - if ((*mach)->probe(systemcfg->platform)) + if ((*mach)->probe(_machine)) break; } /* What can we do if we didn't find ? */ @@ -385,23 +263,74 @@ void __init early_setup(unsigned long dt_ptr) DBG("Found, Initializing memory management...\n"); /* - * Initialize stab / SLB management + * Initialize the MMU Hash table and create the linear mapping + * of memory. Has to be done before stab/slb initialization as + * this is currently where the page size encoding is obtained */ - if (!firmware_has_feature(FW_FEATURE_ISERIES)) - stab_initialize(lpaca->stab_real); + htab_initialize(); /* - * Initialize the MMU Hash table and create the linear mapping - * of memory + * Initialize stab / SLB management except on iSeries */ - htab_initialize(); + if (!firmware_has_feature(FW_FEATURE_ISERIES)) { + if (cpu_has_feature(CPU_FTR_SLB)) + slb_initialize(); + else + stab_initialize(lpaca->stab_real); + } DBG(" <- early_setup()\n"); } +#ifdef CONFIG_SMP +void early_setup_secondary(void) +{ + struct paca_struct *lpaca = get_paca(); + + /* Mark enabled in PACA */ + lpaca->proc_enabled = 0; + + /* Initialize hash table for that CPU */ + htab_initialize_secondary(); + + /* Initialize STAB/SLB. We use a virtual address as it works + * in real mode on pSeries and we want a virutal address on + * iSeries anyway + */ + if (cpu_has_feature(CPU_FTR_SLB)) + slb_initialize(); + else + stab_initialize(lpaca->stab_addr); +} + +#endif /* CONFIG_SMP */ + +#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC) +void smp_release_cpus(void) +{ + extern unsigned long __secondary_hold_spinloop; + + DBG(" -> smp_release_cpus()\n"); + + /* All secondary cpus are spinning on a common spinloop, release them + * all now so they can start to spin on their individual paca + * spinloops. For non SMP kernels, the secondary cpus never get out + * of the common spinloop. + * This is useless but harmless on iSeries, secondaries are already + * waiting on their paca spinloops. */ + + __secondary_hold_spinloop = 1; + mb(); + + DBG(" <- smp_release_cpus()\n"); +} +#else +#define smp_release_cpus() +#endif /* CONFIG_SMP || CONFIG_KEXEC */ /* - * Initialize some remaining members of the ppc64_caches and systemcfg structures + * Initialize some remaining members of the ppc64_caches and systemcfg + * structures * (at least until we get rid of them completely). This is mostly some * cache informations about the CPU that will be used by cache flush * routines and/or provided to userland @@ -426,7 +355,7 @@ static void __init initialize_cache_info(void) const char *dc, *ic; /* Then read cache informations */ - if (systemcfg->platform == PLATFORM_POWERMAC) { + if (_machine == PLATFORM_POWERMAC) { dc = "d-cache-block-size"; ic = "i-cache-block-size"; } else { @@ -446,8 +375,8 @@ static void __init initialize_cache_info(void) DBG("Argh, can't find dcache properties ! " "sizep: %p, lsizep: %p\n", sizep, lsizep); - systemcfg->dcache_size = ppc64_caches.dsize = size; - systemcfg->dcache_line_size = + _systemcfg->dcache_size = ppc64_caches.dsize = size; + _systemcfg->dcache_line_size = ppc64_caches.dline_size = lsize; ppc64_caches.log_dline_size = __ilog2(lsize); ppc64_caches.dlines_per_page = PAGE_SIZE / lsize; @@ -464,8 +393,8 @@ static void __init initialize_cache_info(void) DBG("Argh, can't find icache properties ! " "sizep: %p, lsizep: %p\n", sizep, lsizep); - systemcfg->icache_size = ppc64_caches.isize = size; - systemcfg->icache_line_size = + _systemcfg->icache_size = ppc64_caches.isize = size; + _systemcfg->icache_line_size = ppc64_caches.iline_size = lsize; ppc64_caches.log_iline_size = __ilog2(lsize); ppc64_caches.ilines_per_page = PAGE_SIZE / lsize; @@ -473,51 +402,16 @@ static void __init initialize_cache_info(void) } /* Add an eye catcher and the systemcfg layout version number */ - strcpy(systemcfg->eye_catcher, "SYSTEMCFG:PPC64"); - systemcfg->version.major = SYSTEMCFG_MAJOR; - systemcfg->version.minor = SYSTEMCFG_MINOR; - systemcfg->processor = mfspr(SPRN_PVR); + strcpy(_systemcfg->eye_catcher, "SYSTEMCFG:PPC64"); + _systemcfg->version.major = SYSTEMCFG_MAJOR; + _systemcfg->version.minor = SYSTEMCFG_MINOR; + _systemcfg->processor = mfspr(SPRN_PVR); + _systemcfg->platform = _machine; + _systemcfg->physicalMemorySize = lmb_phys_mem_size(); DBG(" <- initialize_cache_info()\n"); } -static void __init check_for_initrd(void) -{ -#ifdef CONFIG_BLK_DEV_INITRD - u64 *prop; - - DBG(" -> check_for_initrd()\n"); - - if (of_chosen) { - prop = (u64 *)get_property(of_chosen, - "linux,initrd-start", NULL); - if (prop != NULL) { - initrd_start = (unsigned long)__va(*prop); - prop = (u64 *)get_property(of_chosen, - "linux,initrd-end", NULL); - if (prop != NULL) { - initrd_end = (unsigned long)__va(*prop); - initrd_below_start_ok = 1; - } else - initrd_start = 0; - } - } - - /* If we were passed an initrd, set the ROOT_DEV properly if the values - * look sensible. If not, clear initrd reference. - */ - if (initrd_start >= KERNELBASE && initrd_end >= KERNELBASE && - initrd_end > initrd_start) - ROOT_DEV = Root_RAM0; - else - initrd_start = initrd_end = 0; - - if (initrd_start) - printk("Found initrd at 0x%lx:0x%lx\n", initrd_start, initrd_end); - - DBG(" <- check_for_initrd()\n"); -#endif /* CONFIG_BLK_DEV_INITRD */ -} /* * Do some initial setup of the system. The parameters are those which @@ -589,28 +483,23 @@ void __init setup_system(void) parse_early_param(); -#ifdef CONFIG_SMP - /* - * iSeries has already initialized the cpu maps at this point. - */ - setup_cpu_maps(); + check_smt_enabled(); + smp_setup_cpu_maps(); /* Release secondary cpus out of their spinloops at 0x60 now that * we can map physical -> logical CPU ids */ smp_release_cpus(); -#endif printk("Starting Linux PPC64 %s\n", system_utsname.version); printk("-----------------------------------------------------\n"); printk("ppc64_pft_size = 0x%lx\n", ppc64_pft_size); - printk("ppc64_debug_switch = 0x%lx\n", ppc64_debug_switch); printk("ppc64_interrupt_controller = 0x%ld\n", ppc64_interrupt_controller); - printk("systemcfg = 0x%p\n", systemcfg); - printk("systemcfg->platform = 0x%x\n", systemcfg->platform); - printk("systemcfg->processorCount = 0x%lx\n", systemcfg->processorCount); - printk("systemcfg->physicalMemorySize = 0x%lx\n", systemcfg->physicalMemorySize); + printk("systemcfg = 0x%p\n", _systemcfg); + printk("systemcfg->platform = 0x%x\n", _systemcfg->platform); + printk("systemcfg->processorCount = 0x%lx\n", _systemcfg->processorCount); + printk("systemcfg->physicalMemorySize = 0x%lx\n", _systemcfg->physicalMemorySize); printk("ppc64_caches.dcache_line_size = 0x%x\n", ppc64_caches.dline_size); printk("ppc64_caches.icache_line_size = 0x%x\n", @@ -631,23 +520,6 @@ static int ppc64_panic_event(struct notifier_block *this, return NOTIFY_DONE; } -#ifdef CONFIG_PPC_ISERIES -/* - * On iSeries we just parse the mem=X option from the command line. - * On pSeries it's a bit more complicated, see prom_init_mem() - */ -static int __init early_parsemem(char *p) -{ - if (!p) - return 0; - - memory_limit = ALIGN(memparse(p, &p), PAGE_SIZE); - - return 0; -} -early_param("mem", early_parsemem); -#endif /* CONFIG_PPC_ISERIES */ - #ifdef CONFIG_IRQSTACKS static void __init irqstack_early_init(void) { @@ -658,10 +530,12 @@ static void __init irqstack_early_init(void) * SLB misses on them. */ for_each_cpu(i) { - softirq_ctx[i] = (struct thread_info *)__va(lmb_alloc_base(THREAD_SIZE, - THREAD_SIZE, 0x10000000)); - hardirq_ctx[i] = (struct thread_info *)__va(lmb_alloc_base(THREAD_SIZE, - THREAD_SIZE, 0x10000000)); + softirq_ctx[i] = (struct thread_info *) + __va(lmb_alloc_base(THREAD_SIZE, + THREAD_SIZE, 0x10000000)); + hardirq_ctx[i] = (struct thread_info *) + __va(lmb_alloc_base(THREAD_SIZE, + THREAD_SIZE, 0x10000000)); } } #else @@ -689,8 +563,8 @@ static void __init emergency_stack_init(void) limit = min(0x10000000UL, lmb.rmo_size); for_each_cpu(i) - paca[i].emergency_sp = __va(lmb_alloc_base(PAGE_SIZE, 128, - limit)) + PAGE_SIZE; + paca[i].emergency_sp = + __va(lmb_alloc_base(HW_PAGE_SIZE, 128, limit)) + HW_PAGE_SIZE; } /* @@ -707,12 +581,12 @@ void __init setup_syscall_map(void) for (i = 0; i < __NR_syscalls; i++) { if (sys_call_table[i*2] != sys_ni_syscall) { count64++; - systemcfg->syscall_map_64[i >> 5] |= + _systemcfg->syscall_map_64[i >> 5] |= 0x80000000UL >> (i & 0x1f); } if (sys_call_table[i*2+1] != sys_ni_syscall) { count32++; - systemcfg->syscall_map_32[i >> 5] |= + _systemcfg->syscall_map_32[i >> 5] |= 0x80000000UL >> (i & 0x1f); } } @@ -1001,26 +875,6 @@ int check_legacy_ioport(unsigned long base_port) } EXPORT_SYMBOL(check_legacy_ioport); -#ifdef CONFIG_XMON -static int __init early_xmon(char *p) -{ - /* ensure xmon is enabled */ - if (p) { - if (strncmp(p, "on", 2) == 0) - xmon_init(1); - if (strncmp(p, "off", 3) == 0) - xmon_init(0); - if (strncmp(p, "early", 5) != 0) - return 0; - } - xmon_init(1); - debugger(NULL); - - return 0; -} -early_param("xmon", early_xmon); -#endif - void cpu_die(void) { if (ppc_md.cpu_die) diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 444c3e8..a7c4515 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -42,9 +42,9 @@ #include <asm/uaccess.h> #include <asm/cacheflush.h> +#include <asm/sigcontext.h> #ifdef CONFIG_PPC64 -#include <asm/ppc32.h> -#include <asm/ppcdebug.h> +#include "ppc32.h" #include <asm/unistd.h> #include <asm/vdso.h> #else diff --git a/arch/ppc64/kernel/signal.c b/arch/powerpc/kernel/signal_64.c index ec9d098..58194e1 100644 --- a/arch/ppc64/kernel/signal.c +++ b/arch/powerpc/kernel/signal_64.c @@ -33,7 +33,6 @@ #include <asm/ucontext.h> #include <asm/uaccess.h> #include <asm/pgtable.h> -#include <asm/ppcdebug.h> #include <asm/unistd.h> #include <asm/cacheflush.h> #include <asm/vdso.h> diff --git a/arch/ppc64/kernel/smp-tbsync.c b/arch/powerpc/kernel/smp-tbsync.c index 7d8ec99..9adef3b 100644 --- a/arch/ppc64/kernel/smp-tbsync.c +++ b/arch/powerpc/kernel/smp-tbsync.c @@ -22,11 +22,11 @@ enum { }; static struct { - volatile long tb; - volatile long mark; + volatile u64 tb; + volatile u64 mark; volatile int cmd; volatile int handshake; - int filler[3]; + int filler[2]; volatile int ack; int filler2[7]; @@ -36,89 +36,80 @@ static struct { static volatile int running; -static void __devinit -enter_contest( long mark, long add ) +static void __devinit enter_contest(u64 mark, long add) { - while( (long)(mftb() - mark) < 0 ) + while (get_tb() < mark) tbsync->race_result = add; } -void __devinit -smp_generic_take_timebase( void ) +void __devinit smp_generic_take_timebase(void) { int cmd; - long tb; + u64 tb; local_irq_disable(); - while( !running ) - ; + while (!running) + barrier(); rmb(); - for( ;; ) { + for (;;) { tbsync->ack = 1; - while( !tbsync->handshake ) - ; + while (!tbsync->handshake) + barrier(); rmb(); cmd = tbsync->cmd; tb = tbsync->tb; + mb(); tbsync->ack = 0; - if( cmd == kExit ) - return; - - if( cmd == kSetAndTest ) { - while( tbsync->handshake ) - ; - asm volatile ("mttbl %0" :: "r" (tb & 0xfffffffful) ); - asm volatile ("mttbu %0" :: "r" (tb >> 32) ); - } else { - while( tbsync->handshake ) - ; - } - enter_contest( tbsync->mark, -1 ); + if (cmd == kExit) + break; + + while (tbsync->handshake) + barrier(); + if (cmd == kSetAndTest) + set_tb(tb >> 32, tb & 0xfffffffful); + enter_contest(tbsync->mark, -1); } local_irq_enable(); } -static int __devinit -start_contest( int cmd, long offset, long num ) +static int __devinit start_contest(int cmd, long offset, int num) { int i, score=0; - long tb, mark; + u64 tb; + long mark; tbsync->cmd = cmd; local_irq_disable(); - for( i=-3; i<num; ) { - tb = (long)mftb() + 400; + for (i = -3; i < num; ) { + tb = get_tb() + 400; tbsync->tb = tb + offset; tbsync->mark = mark = tb + 400; wmb(); tbsync->handshake = 1; - while( tbsync->ack ) - ; + while (tbsync->ack) + barrier(); - while( (long)(mftb() - tb) <= 0 ) - ; + while (get_tb() <= tb) + barrier(); tbsync->handshake = 0; - enter_contest( mark, 1 ); + enter_contest(mark, 1); - while( !tbsync->ack ) - ; + while (!tbsync->ack) + barrier(); - if ((tbsync->tb ^ (long)mftb()) & 0x8000000000000000ul) - continue; - if( i++ > 0 ) + if (i++ > 0) score += tbsync->race_result; } local_irq_enable(); return score; } -void __devinit -smp_generic_give_timebase( void ) +void __devinit smp_generic_give_timebase(void) { int i, score, score2, old, min=0, max=5000, offset=1000; @@ -130,14 +121,14 @@ smp_generic_give_timebase( void ) mb(); running = 1; - while( !tbsync->ack ) - ; + while (!tbsync->ack) + barrier(); printk("Got ack\n"); /* binary search */ - for( old=-1 ; old != offset ; offset=(min+max)/2 ) { - score = start_contest( kSetAndTest, offset, NUM_ITER ); + for (old = -1; old != offset ; offset = (min+max) / 2) { + score = start_contest(kSetAndTest, offset, NUM_ITER); printk("score %d, offset %d\n", score, offset ); @@ -147,21 +138,22 @@ smp_generic_give_timebase( void ) min = offset; old = offset; } - score = start_contest( kSetAndTest, min, NUM_ITER ); - score2 = start_contest( kSetAndTest, max, NUM_ITER ); + score = start_contest(kSetAndTest, min, NUM_ITER); + score2 = start_contest(kSetAndTest, max, NUM_ITER); - printk( "Min %d (score %d), Max %d (score %d)\n", min, score, max, score2 ); - score = abs( score ); - score2 = abs( score2 ); + printk("Min %d (score %d), Max %d (score %d)\n", + min, score, max, score2); + score = abs(score); + score2 = abs(score2); offset = (score < score2) ? min : max; /* guard against inaccurate mttb */ - for( i=0; i<10; i++ ) { - start_contest( kSetAndTest, offset, NUM_ITER/10 ); + for (i = 0; i < 10; i++) { + start_contest(kSetAndTest, offset, NUM_ITER/10); - if( (score2=start_contest(kTest, offset, NUM_ITER)) < 0 ) + if ((score2 = start_contest(kTest, offset, NUM_ITER)) < 0) score2 = -score2; - if( score2 <= score || score2 < 20 ) + if (score2 <= score || score2 < 20) break; } printk("Final offset: %d (%d/%d)\n", offset, score2, NUM_ITER ); @@ -170,10 +162,10 @@ smp_generic_give_timebase( void ) tbsync->cmd = kExit; wmb(); tbsync->handshake = 1; - while( tbsync->ack ) - ; + while (tbsync->ack) + barrier(); tbsync->handshake = 0; - kfree( tbsync ); + kfree(tbsync); tbsync = NULL; running = 0; } diff --git a/arch/ppc64/kernel/smp.c b/arch/powerpc/kernel/smp.c index 017c129..e28a139 100644 --- a/arch/ppc64/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -39,13 +39,18 @@ #include <asm/pgtable.h> #include <asm/prom.h> #include <asm/smp.h> -#include <asm/paca.h> #include <asm/time.h> #include <asm/machdep.h> #include <asm/cputable.h> #include <asm/system.h> -#include <asm/abs_addr.h> #include <asm/mpic.h> +#include <asm/systemcfg.h> +#ifdef CONFIG_PPC64 +#include <asm/paca.h> +#endif + +int smp_hw_index[NR_CPUS]; +struct thread_info *secondary_ti; #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -60,6 +65,7 @@ cpumask_t cpu_sibling_map[NR_CPUS] = { [0 ... NR_CPUS-1] = CPU_MASK_NONE }; EXPORT_SYMBOL(cpu_online_map); EXPORT_SYMBOL(cpu_possible_map); +/* SMP operations for this machine */ struct smp_ops_t *smp_ops; static volatile unsigned int cpu_callin_map[NR_CPUS]; @@ -89,7 +95,9 @@ void __devinit smp_mpic_setup_cpu(int cpu) { mpic_setup_this_cpu(); } +#endif /* CONFIG_MPIC */ +#ifdef CONFIG_PPC64 void __devinit smp_generic_kick_cpu(int nr) { BUG_ON(nr < 0 || nr >= NR_CPUS); @@ -102,8 +110,7 @@ void __devinit smp_generic_kick_cpu(int nr) paca[nr].cpu_start = 1; smp_mb(); } - -#endif /* CONFIG_MPIC */ +#endif void smp_message_recv(int msg, struct pt_regs *regs) { @@ -111,15 +118,10 @@ void smp_message_recv(int msg, struct pt_regs *regs) case PPC_MSG_CALL_FUNCTION: smp_call_function_interrupt(); break; - case PPC_MSG_RESCHEDULE: + case PPC_MSG_RESCHEDULE: /* XXX Do we have to do this? */ set_need_resched(); break; -#if 0 - case PPC_MSG_MIGRATE_TASK: - /* spare */ - break; -#endif #ifdef CONFIG_DEBUGGER case PPC_MSG_DEBUGGER_BREAK: debugger_ipi(regs); @@ -171,8 +173,8 @@ static struct call_data_struct { int wait; } *call_data; -/* delay of at least 8 seconds on 1GHz cpu */ -#define SMP_CALL_TIMEOUT (1UL << (30 + 3)) +/* delay of at least 8 seconds */ +#define SMP_CALL_TIMEOUT 8 /* * This function sends a 'generic call function' IPI to all other CPUs @@ -194,7 +196,7 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic, { struct call_data_struct data; int ret = -1, cpus; - unsigned long timeout; + u64 timeout; /* Can deadlock when called with interrupts disabled */ WARN_ON(irqs_disabled()); @@ -220,11 +222,12 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic, /* Send a message to all other CPUs and wait for them to respond */ smp_ops->message_pass(MSG_ALL_BUT_SELF, PPC_MSG_CALL_FUNCTION); + timeout = get_tb() + (u64) SMP_CALL_TIMEOUT * tb_ticks_per_sec; + /* Wait for response */ - timeout = SMP_CALL_TIMEOUT; while (atomic_read(&data.started) != cpus) { HMT_low(); - if (--timeout == 0) { + if (get_tb() >= timeout) { printk("smp_call_function on cpu %d: other cpus not " "responding (%d)\n", smp_processor_id(), atomic_read(&data.started)); @@ -234,10 +237,9 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic, } if (wait) { - timeout = SMP_CALL_TIMEOUT; while (atomic_read(&data.finished) != cpus) { HMT_low(); - if (--timeout == 0) { + if (get_tb() >= timeout) { printk("smp_call_function on cpu %d: other " "cpus not finishing (%d/%d)\n", smp_processor_id(), @@ -251,7 +253,7 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic, ret = 0; -out: + out: call_data = NULL; HMT_medium(); spin_unlock(&call_lock); @@ -313,8 +315,11 @@ static void __init smp_create_idle(unsigned int cpu) p = fork_idle(cpu); if (IS_ERR(p)) panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p)); +#ifdef CONFIG_PPC64 paca[cpu].__current = p; +#endif current_set[cpu] = p->thread_info; + p->thread_info->cpu = cpu; } void __init smp_prepare_cpus(unsigned int max_cpus) @@ -333,18 +338,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus) smp_store_cpu_info(boot_cpuid); cpu_callin_map[boot_cpuid] = 1; -#ifndef CONFIG_PPC_ISERIES - paca[boot_cpuid].next_jiffy_update_tb = tb_last_stamp = get_tb(); - - /* - * Should update do_gtod.stamp_xsec. - * For now we leave it which means the time can be some - * number of msecs off until someone does a settimeofday() - */ - do_gtod.varp->tb_orig_stamp = tb_last_stamp; - systemcfg->tb_orig_stamp = tb_last_stamp; -#endif - max_cpus = smp_ops->probe(); smp_space_timers(max_cpus); @@ -359,8 +352,9 @@ void __devinit smp_prepare_boot_cpu(void) BUG_ON(smp_processor_id() != boot_cpuid); cpu_set(boot_cpuid, cpu_online_map); - +#ifdef CONFIG_PPC64 paca[boot_cpuid].__current = current; +#endif current_set[boot_cpuid] = current->thread_info; } @@ -375,9 +369,11 @@ int generic_cpu_disable(void) if (cpu == boot_cpuid) return -EBUSY; - systemcfg->processorCount--; cpu_clear(cpu, cpu_online_map); +#ifdef CONFIG_PPC64 + _systemcfg->processorCount--; fixup_irqs(cpu_online_map); +#endif return 0; } @@ -395,9 +391,11 @@ int generic_cpu_enable(unsigned int cpu) while (!cpu_online(cpu)) cpu_relax(); +#ifdef CONFIG_PPC64 fixup_irqs(cpu_online_map); /* counter the irq disable in fixup_irqs */ local_irq_enable(); +#endif return 0; } @@ -426,7 +424,9 @@ void generic_mach_cpu_die(void) while (__get_cpu_var(cpu_state) != CPU_UP_PREPARE) cpu_relax(); +#ifdef CONFIG_PPC64 flush_tlb_pending(); +#endif cpu_set(cpu, cpu_online_map); local_irq_enable(); } @@ -444,13 +444,16 @@ int __devinit __cpu_up(unsigned int cpu) { int c; + secondary_ti = current_set[cpu]; if (!cpu_enable(cpu)) return 0; if (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu)) return -EINVAL; +#ifdef CONFIG_PPC64 paca[cpu].default_decr = tb_ticks_per_jiffy; +#endif /* Make sure callin-map entry is 0 (can be leftover a CPU * hotplug @@ -513,7 +516,8 @@ int __devinit start_secondary(void *unused) current->active_mm = &init_mm; smp_store_cpu_info(cpu); - set_dec(paca[cpu].default_decr); + set_dec(tb_ticks_per_jiffy); + preempt_disable(); cpu_callin_map[cpu] = 1; smp_ops->setup_cpu(cpu); diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c index a8210ed..9c921d1 100644 --- a/arch/powerpc/kernel/sys_ppc32.c +++ b/arch/powerpc/kernel/sys_ppc32.c @@ -52,7 +52,6 @@ #include <asm/semaphore.h> #include <asm/time.h> #include <asm/mmu_context.h> -#include <asm/systemcfg.h> #include <asm/ppc-pci.h> /* readdir & getdents */ diff --git a/arch/ppc64/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 6654b35..850af19 100644 --- a/arch/ppc64/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -20,6 +20,7 @@ #include <asm/paca.h> #include <asm/lppaca.h> #include <asm/machdep.h> +#include <asm/smp.h> static DEFINE_PER_CPU(struct cpu, cpu_devices); @@ -231,7 +232,7 @@ static void register_cpu_online(unsigned int cpu) sysdev_create_file(s, &attr_pmc7); if (cur_cpu_spec->num_pmcs >= 8) sysdev_create_file(s, &attr_pmc8); - + if (cpu_has_feature(CPU_FTR_SMT)) sysdev_create_file(s, &attr_purr); } diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 23436b6..260b6ec 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -61,14 +61,16 @@ #include <asm/prom.h> #include <asm/irq.h> #include <asm/div64.h> +#include <asm/smp.h> #ifdef CONFIG_PPC64 #include <asm/systemcfg.h> #include <asm/firmware.h> #endif #ifdef CONFIG_PPC_ISERIES -#include <asm/iSeries/ItLpQueue.h> -#include <asm/iSeries/HvCallXm.h> +#include <asm/iseries/it_lp_queue.h> +#include <asm/iseries/hv_call_xm.h> #endif +#include <asm/smp.h> /* keep track of when we need to update the rtc */ time_t last_rtc_update; @@ -118,10 +120,6 @@ static unsigned adjusting_time = 0; unsigned long ppc_proc_freq; unsigned long ppc_tb_freq; -#ifdef CONFIG_PPC32 /* XXX for now */ -#define boot_cpuid 0 -#endif - u64 tb_last_jiffy __cacheline_aligned_in_smp; unsigned long tb_last_stamp; @@ -273,13 +271,13 @@ static inline void update_gtod(u64 new_tb_stamp, u64 new_stamp_xsec, * tb_to_xs and stamp_xsec values are consistent. If not, then it * loops back and reads them again until this criteria is met. */ - ++(systemcfg->tb_update_count); + ++(_systemcfg->tb_update_count); smp_wmb(); - systemcfg->tb_orig_stamp = new_tb_stamp; - systemcfg->stamp_xsec = new_stamp_xsec; - systemcfg->tb_to_xs = new_tb_to_xs; + _systemcfg->tb_orig_stamp = new_tb_stamp; + _systemcfg->stamp_xsec = new_stamp_xsec; + _systemcfg->tb_to_xs = new_tb_to_xs; smp_wmb(); - ++(systemcfg->tb_update_count); + ++(_systemcfg->tb_update_count); #endif } @@ -359,8 +357,9 @@ static void iSeries_tb_recal(void) do_gtod.tb_ticks_per_sec = tb_ticks_per_sec; tb_to_xs = divres.result_low; do_gtod.varp->tb_to_xs = tb_to_xs; - systemcfg->tb_ticks_per_sec = tb_ticks_per_sec; - systemcfg->tb_to_xs = tb_to_xs; + _systemcfg->tb_ticks_per_sec = + tb_ticks_per_sec; + _systemcfg->tb_to_xs = tb_to_xs; } else { printk( "Titan recalibrate: FAILED (difference > 4 percent)\n" @@ -485,6 +484,8 @@ void __init smp_space_timers(unsigned int max_cpus) unsigned long offset = tb_ticks_per_jiffy / max_cpus; unsigned long previous_tb = per_cpu(last_jiffy, boot_cpuid); + /* make sure tb > per_cpu(last_jiffy, cpu) for all cpus always */ + previous_tb -= tb_ticks_per_jiffy; for_each_cpu(i) { if (i != boot_cpuid) { previous_tb += offset; @@ -561,8 +562,8 @@ int do_settimeofday(struct timespec *tv) update_gtod(tb_last_jiffy, new_xsec, do_gtod.varp->tb_to_xs); #ifdef CONFIG_PPC64 - systemcfg->tz_minuteswest = sys_tz.tz_minuteswest; - systemcfg->tz_dsttime = sys_tz.tz_dsttime; + _systemcfg->tz_minuteswest = sys_tz.tz_minuteswest; + _systemcfg->tz_dsttime = sys_tz.tz_dsttime; #endif write_sequnlock_irqrestore(&xtime_lock, flags); @@ -713,11 +714,11 @@ void __init time_init(void) do_gtod.varp->tb_to_xs = tb_to_xs; do_gtod.tb_to_us = tb_to_us; #ifdef CONFIG_PPC64 - systemcfg->tb_orig_stamp = tb_last_jiffy; - systemcfg->tb_update_count = 0; - systemcfg->tb_ticks_per_sec = tb_ticks_per_sec; - systemcfg->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC; - systemcfg->tb_to_xs = tb_to_xs; + _systemcfg->tb_orig_stamp = tb_last_jiffy; + _systemcfg->tb_update_count = 0; + _systemcfg->tb_ticks_per_sec = tb_ticks_per_sec; + _systemcfg->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC; + _systemcfg->tb_to_xs = tb_to_xs; #endif time_freq = 0; diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 5d638ec..2020bb7 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -39,7 +39,6 @@ #include <asm/io.h> #include <asm/machdep.h> #include <asm/rtas.h> -#include <asm/xmon.h> #include <asm/pmc.h> #ifdef CONFIG_PPC32 #include <asm/reg.h> @@ -130,7 +129,7 @@ int die(const char *str, struct pt_regs *regs, long err) nl = 1; #endif #ifdef CONFIG_PPC64 - switch (systemcfg->platform) { + switch (_machine) { case PLATFORM_PSERIES: printk("PSERIES "); nl = 1; @@ -147,8 +146,8 @@ int die(const char *str, struct pt_regs *regs, long err) printk("POWERMAC "); nl = 1; break; - case PLATFORM_BPA: - printk("BPA "); + case PLATFORM_CELL: + printk("CELL "); nl = 1; break; } @@ -748,23 +747,13 @@ static int check_bug_trap(struct pt_regs *regs) return 0; if (bug->line & BUG_WARNING_TRAP) { /* this is a WARN_ON rather than BUG/BUG_ON */ -#ifdef CONFIG_XMON - xmon_printf(KERN_ERR "Badness in %s at %s:%d\n", - bug->function, bug->file, - bug->line & ~BUG_WARNING_TRAP); -#endif /* CONFIG_XMON */ - printk(KERN_ERR "Badness in %s at %s:%d\n", + printk(KERN_ERR "Badness in %s at %s:%ld\n", bug->function, bug->file, bug->line & ~BUG_WARNING_TRAP); dump_stack(); return 1; } -#ifdef CONFIG_XMON - xmon_printf(KERN_CRIT "kernel BUG in %s at %s:%d!\n", - bug->function, bug->file, bug->line); - xmon(regs); -#endif /* CONFIG_XMON */ - printk(KERN_CRIT "kernel BUG in %s at %s:%d!\n", + printk(KERN_CRIT "kernel BUG in %s at %s:%ld!\n", bug->function, bug->file, bug->line); return 0; @@ -898,10 +887,6 @@ void altivec_unavailable_exception(struct pt_regs *regs) die("Unrecoverable VMX/Altivec Unavailable Exception", regs, SIGABRT); } -#ifdef CONFIG_PPC64 -extern perf_irq_t perf_irq; -#endif - #if defined(CONFIG_PPC64) || defined(CONFIG_E500) void performance_monitor_exception(struct pt_regs *regs) { diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index 97082a4..71a6add 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -21,6 +21,7 @@ #include <asm/iommu.h> #include <asm/dma.h> #include <asm/vio.h> +#include <asm/prom.h> static const struct vio_device_id *vio_match_device( const struct vio_device_id *, const struct vio_dev *); @@ -265,7 +266,33 @@ static int vio_bus_match(struct device *dev, struct device_driver *drv) return (ids != NULL) && (vio_match_device(ids, vio_dev) != NULL); } +static int vio_hotplug(struct device *dev, char **envp, int num_envp, + char *buffer, int buffer_size) +{ + const struct vio_dev *vio_dev = to_vio_dev(dev); + char *cp; + int length; + + if (!num_envp) + return -ENOMEM; + + if (!vio_dev->dev.platform_data) + return -ENODEV; + cp = (char *)get_property(vio_dev->dev.platform_data, "compatible", &length); + if (!cp) + return -ENODEV; + + envp[0] = buffer; + length = scnprintf(buffer, buffer_size, "MODALIAS=vio:T%sS%s", + vio_dev->type, cp); + if (buffer_size - length <= 0) + return -ENOMEM; + envp[1] = NULL; + return 0; +} + struct bus_type vio_bus_type = { .name = "vio", + .hotplug = vio_hotplug, .match = vio_bus_match, }; diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index d4dfcfb..7fa7b15 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -3,9 +3,12 @@ #include <asm/page.h> #else #define PAGE_SIZE 4096 +#define KERNELBASE CONFIG_KERNEL_START #endif #include <asm-generic/vmlinux.lds.h> +ENTRY(_stext) + #ifdef CONFIG_PPC64 OUTPUT_ARCH(powerpc:common64) jiffies = jiffies_64; @@ -21,33 +24,9 @@ SECTIONS *(.exit.data) } + . = KERNELBASE; /* Read-only sections, merged into text segment: */ -#ifdef CONFIG_PPC32 - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } -/* .init : { *(.init) } =0*/ - .plt : { *(.plt) } -#endif .text : { *(.text .text.*) SCHED_TEXT diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index e6b2be3..34f5c2e 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -3,13 +3,14 @@ # ifeq ($(CONFIG_PPC_MERGE),y) -obj-y := string.o +obj-y := string.o strcase.o +obj-$(CONFIG_PPC32) += div64.o copy_32.o checksum_32.o endif -obj-y += strcase.o -obj-$(CONFIG_PPC32) += div64.o copy_32.o checksum_32.o +obj-y += bitops.o obj-$(CONFIG_PPC64) += checksum_64.o copypage_64.o copyuser_64.o \ - memcpy_64.o usercopy_64.o mem_64.o + memcpy_64.o usercopy_64.o mem_64.o string.o \ + strcase.o obj-$(CONFIG_PPC_ISERIES) += e2a.o obj-$(CONFIG_XMON) += sstep.o diff --git a/arch/ppc64/kernel/bitops.c b/arch/powerpc/lib/bitops.c index ae329e8..f68ad71 100644 --- a/arch/ppc64/kernel/bitops.c +++ b/arch/powerpc/lib/bitops.c @@ -1,93 +1,97 @@ -/* - * These are too big to be inlined. - */ - -#include <linux/kernel.h> +#include <linux/types.h> #include <linux/module.h> -#include <linux/bitops.h> #include <asm/byteorder.h> +#include <asm/bitops.h> -unsigned long find_next_zero_bit(const unsigned long *addr, unsigned long size, - unsigned long offset) +/** + * find_next_bit - find the next set bit in a memory region + * @addr: The address to base the search on + * @offset: The bitnumber to start searching at + * @size: The maximum size to search + */ +unsigned long find_next_bit(const unsigned long *addr, unsigned long size, + unsigned long offset) { - const unsigned long *p = addr + (offset >> 6); - unsigned long result = offset & ~63UL; + const unsigned long *p = addr + BITOP_WORD(offset); + unsigned long result = offset & ~(BITS_PER_LONG-1); unsigned long tmp; if (offset >= size) return size; size -= result; - offset &= 63UL; + offset %= BITS_PER_LONG; if (offset) { tmp = *(p++); - tmp |= ~0UL >> (64 - offset); - if (size < 64) + tmp &= (~0UL << offset); + if (size < BITS_PER_LONG) goto found_first; - if (~tmp) + if (tmp) goto found_middle; - size -= 64; - result += 64; + size -= BITS_PER_LONG; + result += BITS_PER_LONG; } - while (size & ~63UL) { - if (~(tmp = *(p++))) + while (size & ~(BITS_PER_LONG-1)) { + if ((tmp = *(p++))) goto found_middle; - result += 64; - size -= 64; + result += BITS_PER_LONG; + size -= BITS_PER_LONG; } if (!size) return result; tmp = *p; found_first: - tmp |= ~0UL << size; - if (tmp == ~0UL) /* Are any bits zero? */ + tmp &= (~0UL >> (BITS_PER_LONG - size)); + if (tmp == 0UL) /* Are any bits set? */ return result + size; /* Nope. */ found_middle: - return result + ffz(tmp); + return result + __ffs(tmp); } +EXPORT_SYMBOL(find_next_bit); -EXPORT_SYMBOL(find_next_zero_bit); - -unsigned long find_next_bit(const unsigned long *addr, unsigned long size, - unsigned long offset) +/* + * This implementation of find_{first,next}_zero_bit was stolen from + * Linus' asm-alpha/bitops.h. + */ +unsigned long find_next_zero_bit(const unsigned long *addr, unsigned long size, + unsigned long offset) { - const unsigned long *p = addr + (offset >> 6); - unsigned long result = offset & ~63UL; + const unsigned long *p = addr + BITOP_WORD(offset); + unsigned long result = offset & ~(BITS_PER_LONG-1); unsigned long tmp; if (offset >= size) return size; size -= result; - offset &= 63UL; + offset %= BITS_PER_LONG; if (offset) { tmp = *(p++); - tmp &= (~0UL << offset); - if (size < 64) + tmp |= ~0UL >> (BITS_PER_LONG - offset); + if (size < BITS_PER_LONG) goto found_first; - if (tmp) + if (~tmp) goto found_middle; - size -= 64; - result += 64; + size -= BITS_PER_LONG; + result += BITS_PER_LONG; } - while (size & ~63UL) { - if ((tmp = *(p++))) + while (size & ~(BITS_PER_LONG-1)) { + if (~(tmp = *(p++))) goto found_middle; - result += 64; - size -= 64; + result += BITS_PER_LONG; + size -= BITS_PER_LONG; } if (!size) return result; tmp = *p; found_first: - tmp &= (~0UL >> (64 - size)); - if (tmp == 0UL) /* Are any bits set? */ + tmp |= ~0UL << size; + if (tmp == ~0UL) /* Are any bits zero? */ return result + size; /* Nope. */ found_middle: - return result + __ffs(tmp); + return result + ffz(tmp); } - -EXPORT_SYMBOL(find_next_bit); +EXPORT_SYMBOL(find_next_zero_bit); static inline unsigned int ext2_ilog2(unsigned int x) { @@ -106,8 +110,8 @@ static inline unsigned int ext2_ffz(unsigned int x) return rc; } -unsigned long find_next_zero_le_bit(const unsigned long *addr, unsigned long size, - unsigned long offset) +unsigned long find_next_zero_le_bit(const unsigned long *addr, + unsigned long size, unsigned long offset) { const unsigned int *p = ((const unsigned int *)addr) + (offset >> 5); unsigned int result = offset & ~31; @@ -143,5 +147,4 @@ found_first: found_middle: return result + ext2_ffz(tmp); } - EXPORT_SYMBOL(find_next_zero_le_bit); diff --git a/arch/powerpc/lib/copypage_64.S b/arch/powerpc/lib/copypage_64.S index 733d616..40523b1 100644 --- a/arch/powerpc/lib/copypage_64.S +++ b/arch/powerpc/lib/copypage_64.S @@ -11,7 +11,7 @@ #include <asm/processor.h> #include <asm/ppc_asm.h> -_GLOBAL(copy_page) +_GLOBAL(copy_4K_page) std r31,-8(1) std r30,-16(1) std r29,-24(1) diff --git a/arch/powerpc/lib/copyuser_64.S b/arch/powerpc/lib/copyuser_64.S index a0b3fbb..6d69ef3 100644 --- a/arch/powerpc/lib/copyuser_64.S +++ b/arch/powerpc/lib/copyuser_64.S @@ -24,7 +24,7 @@ _GLOBAL(__copy_tofrom_user) std r4,-16(r1) std r5,-8(r1) dcbt 0,r4 - beq .Lcopy_page + beq .Lcopy_page_4K andi. r6,r6,7 mtcrf 0x01,r5 blt cr1,.Lshort_copy @@ -366,7 +366,7 @@ _GLOBAL(__copy_tofrom_user) * above (following the .Ldst_aligned label) but it runs slightly * slower on POWER3. */ -.Lcopy_page: +.Lcopy_page_4K: std r31,-32(1) std r30,-40(1) std r29,-48(1) diff --git a/arch/powerpc/lib/locks.c b/arch/powerpc/lib/locks.c index 3794715..35bd03c 100644 --- a/arch/powerpc/lib/locks.c +++ b/arch/powerpc/lib/locks.c @@ -22,7 +22,8 @@ /* waiting for a spinlock... */ #if defined(CONFIG_PPC_SPLPAR) || defined(CONFIG_PPC_ISERIES) #include <asm/hvcall.h> -#include <asm/iSeries/HvCall.h> +#include <asm/iseries/hv_call.h> +#include <asm/smp.h> void __spin_yield(raw_spinlock_t *lock) { diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index 841d8b6..93d4fbf 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -389,5 +389,22 @@ void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig) } /* kernel has accessed a bad area */ + + printk(KERN_ALERT "Unable to handle kernel paging request for "); + switch (regs->trap) { + case 0x300: + case 0x380: + printk("data at address 0x%08lx\n", regs->dar); + break; + case 0x400: + case 0x480: + printk("instruction fetch\n"); + break; + default: + printk("unknown fault\n"); + } + printk(KERN_ALERT "Faulting instruction address: 0x%08lx\n", + regs->nip); + die("Kernel access of bad area", regs, sig); } diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S index d6ed910..e0d02c4 100644 --- a/arch/powerpc/mm/hash_low_64.S +++ b/arch/powerpc/mm/hash_low_64.S @@ -1,7 +1,7 @@ /* * ppc64 MMU hashtable management routines * - * (c) Copyright IBM Corp. 2003 + * (c) Copyright IBM Corp. 2003, 2005 * * Maintained by: Benjamin Herrenschmidt * <benh@kernel.crashing.org> @@ -10,6 +10,7 @@ * described in the kernel's COPYING file. */ +#include <linux/config.h> #include <asm/reg.h> #include <asm/pgtable.h> #include <asm/mmu.h> @@ -42,14 +43,24 @@ /* Save non-volatile offsets */ #define STK_REG(i) (112 + ((i)-14)*8) + +#ifndef CONFIG_PPC_64K_PAGES + +/***************************************************************************** + * * + * 4K SW & 4K HW pages implementation * + * * + *****************************************************************************/ + + /* - * _hash_page(unsigned long ea, unsigned long access, unsigned long vsid, - * pte_t *ptep, unsigned long trap, int local) + * _hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid, + * pte_t *ptep, unsigned long trap, int local) * - * Adds a page to the hash table. This is the non-LPAR version for now + * Adds a 4K page to the hash table in a segment of 4K pages only */ -_GLOBAL(__hash_page) +_GLOBAL(__hash_page_4K) mflr r0 std r0,16(r1) stdu r1,-STACKFRAMESIZE(r1) @@ -88,7 +99,8 @@ _GLOBAL(__hash_page) /* If so, just bail out and refault if needed. Someone else * is changing this PTE anyway and might hash it. */ - bne- bail_ok + bne- htab_bail_ok + /* Prepare new PTE value (turn access RW into DIRTY, then * add BUSY,HASHPTE and ACCESSED) */ @@ -118,10 +130,10 @@ _GLOBAL(__hash_page) /* Convert linux PTE bits into HW equivalents */ andi. r3,r30,0x1fe /* Get basic set of flags */ - xori r3,r3,HW_NO_EXEC /* _PAGE_EXEC -> NOEXEC */ + xori r3,r3,HPTE_R_N /* _PAGE_EXEC -> NOEXEC */ rlwinm r0,r30,32-9+1,30,30 /* _PAGE_RW -> _PAGE_USER (r0) */ rlwinm r4,r30,32-7+1,30,30 /* _PAGE_DIRTY -> _PAGE_USER (r4) */ - and r0,r0,r4 /* _PAGE_RW & _PAGE_DIRTY -> r0 bit 30 */ + and r0,r0,r4 /* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/ andc r0,r30,r0 /* r0 = pte & ~r0 */ rlwimi r3,r0,32-1,31,31 /* Insert result into PP lsb */ @@ -158,19 +170,21 @@ htab_insert_pte: andc r30,r30,r0 ori r30,r30,_PAGE_HASHPTE - /* page number in r5 */ - rldicl r5,r31,64-PTE_SHIFT,PTE_SHIFT + /* physical address r5 */ + rldicl r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT + sldi r5,r5,PAGE_SHIFT /* Calculate primary group hash */ and r0,r28,r27 - rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */ + rldicr r3,r0,3,63-3 /* r3 = (hash & mask) << 3 */ /* Call ppc_md.hpte_insert */ - ld r7,STK_PARM(r4)(r1) /* Retreive new pp bits */ + ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */ mr r4,r29 /* Retreive va */ - li r6,0 /* no vflags */ + li r7,0 /* !bolted, !secondary */ + li r8,MMU_PAGE_4K /* page size */ _GLOBAL(htab_call_hpte_insert1) - bl . /* Will be patched by htab_finish_init() */ + bl . /* Patched by htab_finish_init() */ cmpdi 0,r3,0 bge htab_pte_insert_ok /* Insertion successful */ cmpdi 0,r3,-2 /* Critical failure */ @@ -178,19 +192,21 @@ _GLOBAL(htab_call_hpte_insert1) /* Now try secondary slot */ - /* page number in r5 */ - rldicl r5,r31,64-PTE_SHIFT,PTE_SHIFT + /* physical address r5 */ + rldicl r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT + sldi r5,r5,PAGE_SHIFT /* Calculate secondary group hash */ andc r0,r27,r28 rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */ /* Call ppc_md.hpte_insert */ - ld r7,STK_PARM(r4)(r1) /* Retreive new pp bits */ + ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */ mr r4,r29 /* Retreive va */ - li r6,HPTE_V_SECONDARY@l /* secondary slot */ + li r7,HPTE_V_SECONDARY /* !bolted, secondary */ + li r8,MMU_PAGE_4K /* page size */ _GLOBAL(htab_call_hpte_insert2) - bl . /* Will be patched by htab_finish_init() */ + bl . /* Patched by htab_finish_init() */ cmpdi 0,r3,0 bge+ htab_pte_insert_ok /* Insertion successful */ cmpdi 0,r3,-2 /* Critical failure */ @@ -207,14 +223,14 @@ _GLOBAL(htab_call_hpte_insert2) rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */ /* Call ppc_md.hpte_remove */ _GLOBAL(htab_call_hpte_remove) - bl . /* Will be patched by htab_finish_init() */ + bl . /* Patched by htab_finish_init() */ /* Try all again */ b htab_insert_pte -bail_ok: +htab_bail_ok: li r3,0 - b bail + b htab_bail htab_pte_insert_ok: /* Insert slot number & secondary bit in PTE */ @@ -227,7 +243,7 @@ htab_write_out_pte: ld r6,STK_PARM(r6)(r1) std r30,0(r6) li r3, 0 -bail: +htab_bail: ld r27,STK_REG(r27)(r1) ld r28,STK_REG(r28)(r1) ld r29,STK_REG(r29)(r1) @@ -256,10 +272,10 @@ htab_modify_pte: /* Call ppc_md.hpte_updatepp */ mr r5,r29 /* va */ - li r6,0 /* large is 0 */ + li r6,MMU_PAGE_4K /* page size */ ld r7,STK_PARM(r8)(r1) /* get "local" param */ _GLOBAL(htab_call_hpte_updatepp) - bl . /* Will be patched by htab_finish_init() */ + bl . /* Patched by htab_finish_init() */ /* if we failed because typically the HPTE wasn't really here * we try an insertion. @@ -276,13 +292,556 @@ htab_wrong_access: /* Bail out clearing reservation */ stdcx. r31,0,r6 li r3,1 - b bail + b htab_bail + +htab_pte_insert_failure: + /* Bail out restoring old PTE */ + ld r6,STK_PARM(r6)(r1) + std r31,0(r6) + li r3,-1 + b htab_bail + + +#else /* CONFIG_PPC_64K_PAGES */ + + +/***************************************************************************** + * * + * 64K SW & 4K or 64K HW in a 4K segment pages implementation * + * * + *****************************************************************************/ + +/* _hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid, + * pte_t *ptep, unsigned long trap, int local) + */ + +/* + * For now, we do NOT implement Admixed pages + */ +_GLOBAL(__hash_page_4K) + mflr r0 + std r0,16(r1) + stdu r1,-STACKFRAMESIZE(r1) + /* Save all params that we need after a function call */ + std r6,STK_PARM(r6)(r1) + std r8,STK_PARM(r8)(r1) + + /* Add _PAGE_PRESENT to access */ + ori r4,r4,_PAGE_PRESENT + + /* Save non-volatile registers. + * r31 will hold "old PTE" + * r30 is "new PTE" + * r29 is "va" + * r28 is a hash value + * r27 is hashtab mask (maybe dynamic patched instead ?) + * r26 is the hidx mask + * r25 is the index in combo page + */ + std r25,STK_REG(r25)(r1) + std r26,STK_REG(r26)(r1) + std r27,STK_REG(r27)(r1) + std r28,STK_REG(r28)(r1) + std r29,STK_REG(r29)(r1) + std r30,STK_REG(r30)(r1) + std r31,STK_REG(r31)(r1) + + /* Step 1: + * + * Check permissions, atomically mark the linux PTE busy + * and hashed. + */ +1: + ldarx r31,0,r6 + /* Check access rights (access & ~(pte_val(*ptep))) */ + andc. r0,r4,r31 + bne- htab_wrong_access + /* Check if PTE is busy */ + andi. r0,r31,_PAGE_BUSY + /* If so, just bail out and refault if needed. Someone else + * is changing this PTE anyway and might hash it. + */ + bne- htab_bail_ok + /* Prepare new PTE value (turn access RW into DIRTY, then + * add BUSY and ACCESSED) + */ + rlwinm r30,r4,32-9+7,31-7,31-7 /* _PAGE_RW -> _PAGE_DIRTY */ + or r30,r30,r31 + ori r30,r30,_PAGE_BUSY | _PAGE_ACCESSED | _PAGE_HASHPTE + /* Write the linux PTE atomically (setting busy) */ + stdcx. r30,0,r6 + bne- 1b + isync + + /* Step 2: + * + * Insert/Update the HPTE in the hash table. At this point, + * r4 (access) is re-useable, we use it for the new HPTE flags + */ + + /* Load the hidx index */ + rldicl r25,r3,64-12,60 + + /* Calc va and put it in r29 */ + rldicr r29,r5,28,63-28 /* r29 = (vsid << 28) */ + rldicl r3,r3,0,36 /* r3 = (ea & 0x0fffffff) */ + or r29,r3,r29 /* r29 = va + + /* Calculate hash value for primary slot and store it in r28 */ + rldicl r5,r5,0,25 /* vsid & 0x0000007fffffffff */ + rldicl r0,r3,64-12,48 /* (ea >> 12) & 0xffff */ + xor r28,r5,r0 + + /* Convert linux PTE bits into HW equivalents */ + andi. r3,r30,0x1fe /* Get basic set of flags */ + xori r3,r3,HPTE_R_N /* _PAGE_EXEC -> NOEXEC */ + rlwinm r0,r30,32-9+1,30,30 /* _PAGE_RW -> _PAGE_USER (r0) */ + rlwinm r4,r30,32-7+1,30,30 /* _PAGE_DIRTY -> _PAGE_USER (r4) */ + and r0,r0,r4 /* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/ + andc r0,r30,r0 /* r0 = pte & ~r0 */ + rlwimi r3,r0,32-1,31,31 /* Insert result into PP lsb */ + + /* We eventually do the icache sync here (maybe inline that + * code rather than call a C function...) + */ +BEGIN_FTR_SECTION + mr r4,r30 + mr r5,r7 + bl .hash_page_do_lazy_icache +END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE) + + /* At this point, r3 contains new PP bits, save them in + * place of "access" in the param area (sic) + */ + std r3,STK_PARM(r4)(r1) + + /* Get htab_hash_mask */ + ld r4,htab_hash_mask@got(2) + ld r27,0(r4) /* htab_hash_mask -> r27 */ + + /* Check if we may already be in the hashtable, in this case, we + * go to out-of-line code to try to modify the HPTE. We look for + * the bit at (1 >> (index + 32)) + */ + andi. r0,r31,_PAGE_HASHPTE + li r26,0 /* Default hidx */ + beq htab_insert_pte + ld r6,STK_PARM(r6)(r1) + ori r26,r6,0x8000 /* Load the hidx mask */ + ld r26,0(r26) + addi r5,r25,36 /* Check actual HPTE_SUB bit, this */ + rldcr. r0,r31,r5,0 /* must match pgtable.h definition */ + bne htab_modify_pte + +htab_insert_pte: + /* real page number in r5, PTE RPN value + index */ + rldicl r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT + sldi r5,r5,PAGE_SHIFT-HW_PAGE_SHIFT + add r5,r5,r25 + sldi r5,r5,HW_PAGE_SHIFT + + /* Calculate primary group hash */ + and r0,r28,r27 + rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */ + + /* Call ppc_md.hpte_insert */ + ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */ + mr r4,r29 /* Retreive va */ + li r7,0 /* !bolted, !secondary */ + li r8,MMU_PAGE_4K /* page size */ +_GLOBAL(htab_call_hpte_insert1) + bl . /* patched by htab_finish_init() */ + cmpdi 0,r3,0 + bge htab_pte_insert_ok /* Insertion successful */ + cmpdi 0,r3,-2 /* Critical failure */ + beq- htab_pte_insert_failure + + /* Now try secondary slot */ + + /* real page number in r5, PTE RPN value + index */ + rldicl r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT + sldi r5,r5,PAGE_SHIFT-HW_PAGE_SHIFT + add r5,r5,r25 + sldi r5,r5,HW_PAGE_SHIFT + + /* Calculate secondary group hash */ + andc r0,r27,r28 + rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */ + + /* Call ppc_md.hpte_insert */ + ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */ + mr r4,r29 /* Retreive va */ + li r7,HPTE_V_SECONDARY /* !bolted, secondary */ + li r8,MMU_PAGE_4K /* page size */ +_GLOBAL(htab_call_hpte_insert2) + bl . /* patched by htab_finish_init() */ + cmpdi 0,r3,0 + bge+ htab_pte_insert_ok /* Insertion successful */ + cmpdi 0,r3,-2 /* Critical failure */ + beq- htab_pte_insert_failure + + /* Both are full, we need to evict something */ + mftb r0 + /* Pick a random group based on TB */ + andi. r0,r0,1 + mr r5,r28 + bne 2f + not r5,r5 +2: and r0,r5,r27 + rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */ + /* Call ppc_md.hpte_remove */ +_GLOBAL(htab_call_hpte_remove) + bl . /* patched by htab_finish_init() */ + + /* Try all again */ + b htab_insert_pte + +htab_bail_ok: + li r3,0 + b htab_bail + +htab_pte_insert_ok: + /* Insert slot number & secondary bit in PTE second half, + * clear _PAGE_BUSY and set approriate HPTE slot bit + */ + ld r6,STK_PARM(r6)(r1) + li r0,_PAGE_BUSY + andc r30,r30,r0 + /* HPTE SUB bit */ + li r0,1 + subfic r5,r25,27 /* Must match bit position in */ + sld r0,r0,r5 /* pgtable.h */ + or r30,r30,r0 + /* hindx */ + sldi r5,r25,2 + sld r3,r3,r5 + li r4,0xf + sld r4,r4,r5 + andc r26,r26,r4 + or r26,r26,r3 + ori r5,r6,0x8000 + std r26,0(r5) + lwsync + std r30,0(r6) + li r3, 0 +htab_bail: + ld r25,STK_REG(r25)(r1) + ld r26,STK_REG(r26)(r1) + ld r27,STK_REG(r27)(r1) + ld r28,STK_REG(r28)(r1) + ld r29,STK_REG(r29)(r1) + ld r30,STK_REG(r30)(r1) + ld r31,STK_REG(r31)(r1) + addi r1,r1,STACKFRAMESIZE + ld r0,16(r1) + mtlr r0 + blr + +htab_modify_pte: + /* Keep PP bits in r4 and slot idx from the PTE around in r3 */ + mr r4,r3 + sldi r5,r25,2 + srd r3,r26,r5 + + /* Secondary group ? if yes, get a inverted hash value */ + mr r5,r28 + andi. r0,r3,0x8 /* page secondary ? */ + beq 1f + not r5,r5 +1: andi. r3,r3,0x7 /* extract idx alone */ + + /* Calculate proper slot value for ppc_md.hpte_updatepp */ + and r0,r5,r27 + rldicr r0,r0,3,63-3 /* r0 = (hash & mask) << 3 */ + add r3,r0,r3 /* add slot idx */ + + /* Call ppc_md.hpte_updatepp */ + mr r5,r29 /* va */ + li r6,MMU_PAGE_4K /* page size */ + ld r7,STK_PARM(r8)(r1) /* get "local" param */ +_GLOBAL(htab_call_hpte_updatepp) + bl . /* patched by htab_finish_init() */ + + /* if we failed because typically the HPTE wasn't really here + * we try an insertion. + */ + cmpdi 0,r3,-1 + beq- htab_insert_pte + + /* Clear the BUSY bit and Write out the PTE */ + li r0,_PAGE_BUSY + andc r30,r30,r0 + ld r6,STK_PARM(r6)(r1) + std r30,0(r6) + li r3,0 + b htab_bail + +htab_wrong_access: + /* Bail out clearing reservation */ + stdcx. r31,0,r6 + li r3,1 + b htab_bail htab_pte_insert_failure: /* Bail out restoring old PTE */ ld r6,STK_PARM(r6)(r1) std r31,0(r6) li r3,-1 - b bail + b htab_bail + + +/***************************************************************************** + * * + * 64K SW & 64K HW in a 64K segment pages implementation * + * * + *****************************************************************************/ + +_GLOBAL(__hash_page_64K) + mflr r0 + std r0,16(r1) + stdu r1,-STACKFRAMESIZE(r1) + /* Save all params that we need after a function call */ + std r6,STK_PARM(r6)(r1) + std r8,STK_PARM(r8)(r1) + + /* Add _PAGE_PRESENT to access */ + ori r4,r4,_PAGE_PRESENT + + /* Save non-volatile registers. + * r31 will hold "old PTE" + * r30 is "new PTE" + * r29 is "va" + * r28 is a hash value + * r27 is hashtab mask (maybe dynamic patched instead ?) + */ + std r27,STK_REG(r27)(r1) + std r28,STK_REG(r28)(r1) + std r29,STK_REG(r29)(r1) + std r30,STK_REG(r30)(r1) + std r31,STK_REG(r31)(r1) + + /* Step 1: + * + * Check permissions, atomically mark the linux PTE busy + * and hashed. + */ +1: + ldarx r31,0,r6 + /* Check access rights (access & ~(pte_val(*ptep))) */ + andc. r0,r4,r31 + bne- ht64_wrong_access + /* Check if PTE is busy */ + andi. r0,r31,_PAGE_BUSY + /* If so, just bail out and refault if needed. Someone else + * is changing this PTE anyway and might hash it. + */ + bne- ht64_bail_ok + /* Prepare new PTE value (turn access RW into DIRTY, then + * add BUSY,HASHPTE and ACCESSED) + */ + rlwinm r30,r4,32-9+7,31-7,31-7 /* _PAGE_RW -> _PAGE_DIRTY */ + or r30,r30,r31 + ori r30,r30,_PAGE_BUSY | _PAGE_ACCESSED | _PAGE_HASHPTE + /* Write the linux PTE atomically (setting busy) */ + stdcx. r30,0,r6 + bne- 1b + isync + + /* Step 2: + * + * Insert/Update the HPTE in the hash table. At this point, + * r4 (access) is re-useable, we use it for the new HPTE flags + */ + + /* Calc va and put it in r29 */ + rldicr r29,r5,28,63-28 + rldicl r3,r3,0,36 + or r29,r3,r29 + + /* Calculate hash value for primary slot and store it in r28 */ + rldicl r5,r5,0,25 /* vsid & 0x0000007fffffffff */ + rldicl r0,r3,64-16,52 /* (ea >> 16) & 0xfff */ + xor r28,r5,r0 + + /* Convert linux PTE bits into HW equivalents */ + andi. r3,r30,0x1fe /* Get basic set of flags */ + xori r3,r3,HPTE_R_N /* _PAGE_EXEC -> NOEXEC */ + rlwinm r0,r30,32-9+1,30,30 /* _PAGE_RW -> _PAGE_USER (r0) */ + rlwinm r4,r30,32-7+1,30,30 /* _PAGE_DIRTY -> _PAGE_USER (r4) */ + and r0,r0,r4 /* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/ + andc r0,r30,r0 /* r0 = pte & ~r0 */ + rlwimi r3,r0,32-1,31,31 /* Insert result into PP lsb */ + + /* We eventually do the icache sync here (maybe inline that + * code rather than call a C function...) + */ +BEGIN_FTR_SECTION + mr r4,r30 + mr r5,r7 + bl .hash_page_do_lazy_icache +END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE) + + /* At this point, r3 contains new PP bits, save them in + * place of "access" in the param area (sic) + */ + std r3,STK_PARM(r4)(r1) + + /* Get htab_hash_mask */ + ld r4,htab_hash_mask@got(2) + ld r27,0(r4) /* htab_hash_mask -> r27 */ + + /* Check if we may already be in the hashtable, in this case, we + * go to out-of-line code to try to modify the HPTE + */ + andi. r0,r31,_PAGE_HASHPTE + bne ht64_modify_pte + +ht64_insert_pte: + /* Clear hpte bits in new pte (we also clear BUSY btw) and + * add _PAGE_HASHPTE + */ + lis r0,_PAGE_HPTEFLAGS@h + ori r0,r0,_PAGE_HPTEFLAGS@l + andc r30,r30,r0 + ori r30,r30,_PAGE_HASHPTE + + /* Phyical address in r5 */ + rldicl r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT + sldi r5,r5,PAGE_SHIFT + + /* Calculate primary group hash */ + and r0,r28,r27 + rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */ + + /* Call ppc_md.hpte_insert */ + ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */ + mr r4,r29 /* Retreive va */ + li r7,0 /* !bolted, !secondary */ + li r8,MMU_PAGE_64K +_GLOBAL(ht64_call_hpte_insert1) + bl . /* patched by htab_finish_init() */ + cmpdi 0,r3,0 + bge ht64_pte_insert_ok /* Insertion successful */ + cmpdi 0,r3,-2 /* Critical failure */ + beq- ht64_pte_insert_failure + + /* Now try secondary slot */ + + /* Phyical address in r5 */ + rldicl r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT + sldi r5,r5,PAGE_SHIFT + + /* Calculate secondary group hash */ + andc r0,r27,r28 + rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */ + + /* Call ppc_md.hpte_insert */ + ld r6,STK_PARM(r4)(r1) /* Retreive new pp bits */ + mr r4,r29 /* Retreive va */ + li r7,HPTE_V_SECONDARY /* !bolted, secondary */ + li r8,MMU_PAGE_64K +_GLOBAL(ht64_call_hpte_insert2) + bl . /* patched by htab_finish_init() */ + cmpdi 0,r3,0 + bge+ ht64_pte_insert_ok /* Insertion successful */ + cmpdi 0,r3,-2 /* Critical failure */ + beq- ht64_pte_insert_failure + + /* Both are full, we need to evict something */ + mftb r0 + /* Pick a random group based on TB */ + andi. r0,r0,1 + mr r5,r28 + bne 2f + not r5,r5 +2: and r0,r5,r27 + rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */ + /* Call ppc_md.hpte_remove */ +_GLOBAL(ht64_call_hpte_remove) + bl . /* patched by htab_finish_init() */ + + /* Try all again */ + b ht64_insert_pte + +ht64_bail_ok: + li r3,0 + b ht64_bail + +ht64_pte_insert_ok: + /* Insert slot number & secondary bit in PTE */ + rldimi r30,r3,12,63-15 + + /* Write out the PTE with a normal write + * (maybe add eieio may be good still ?) + */ +ht64_write_out_pte: + ld r6,STK_PARM(r6)(r1) + std r30,0(r6) + li r3, 0 +ht64_bail: + ld r27,STK_REG(r27)(r1) + ld r28,STK_REG(r28)(r1) + ld r29,STK_REG(r29)(r1) + ld r30,STK_REG(r30)(r1) + ld r31,STK_REG(r31)(r1) + addi r1,r1,STACKFRAMESIZE + ld r0,16(r1) + mtlr r0 + blr + +ht64_modify_pte: + /* Keep PP bits in r4 and slot idx from the PTE around in r3 */ + mr r4,r3 + rlwinm r3,r31,32-12,29,31 + + /* Secondary group ? if yes, get a inverted hash value */ + mr r5,r28 + andi. r0,r31,_PAGE_F_SECOND + beq 1f + not r5,r5 +1: + /* Calculate proper slot value for ppc_md.hpte_updatepp */ + and r0,r5,r27 + rldicr r0,r0,3,63-3 /* r0 = (hash & mask) << 3 */ + add r3,r0,r3 /* add slot idx */ + + /* Call ppc_md.hpte_updatepp */ + mr r5,r29 /* va */ + li r6,MMU_PAGE_64K + ld r7,STK_PARM(r8)(r1) /* get "local" param */ +_GLOBAL(ht64_call_hpte_updatepp) + bl . /* patched by htab_finish_init() */ + + /* if we failed because typically the HPTE wasn't really here + * we try an insertion. + */ + cmpdi 0,r3,-1 + beq- ht64_insert_pte + + /* Clear the BUSY bit and Write out the PTE */ + li r0,_PAGE_BUSY + andc r30,r30,r0 + b ht64_write_out_pte + +ht64_wrong_access: + /* Bail out clearing reservation */ + stdcx. r31,0,r6 + li r3,1 + b ht64_bail + +ht64_pte_insert_failure: + /* Bail out restoring old PTE */ + ld r6,STK_PARM(r6)(r1) + std r31,0(r6) + li r3,-1 + b ht64_bail + + +#endif /* CONFIG_PPC_64K_PAGES */ +/***************************************************************************** + * * + * Huge pages implementation is in hugetlbpage.c * + * * + *****************************************************************************/ diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c index 174d145..d96bcfe 100644 --- a/arch/powerpc/mm/hash_native_64.c +++ b/arch/powerpc/mm/hash_native_64.c @@ -9,6 +9,9 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ + +#undef DEBUG_LOW + #include <linux/spinlock.h> #include <linux/bitops.h> #include <linux/threads.h> @@ -22,11 +25,84 @@ #include <asm/tlbflush.h> #include <asm/tlb.h> #include <asm/cputable.h> +#include <asm/udbg.h> + +#ifdef DEBUG_LOW +#define DBG_LOW(fmt...) udbg_printf(fmt) +#else +#define DBG_LOW(fmt...) +#endif #define HPTE_LOCK_BIT 3 static DEFINE_SPINLOCK(native_tlbie_lock); +static inline void __tlbie(unsigned long va, unsigned int psize) +{ + unsigned int penc; + + /* clear top 16 bits, non SLS segment */ + va &= ~(0xffffULL << 48); + + switch (psize) { + case MMU_PAGE_4K: + va &= ~0xffful; + asm volatile("tlbie %0,0" : : "r" (va) : "memory"); + break; + default: + penc = mmu_psize_defs[psize].penc; + va &= ~((1ul << mmu_psize_defs[psize].shift) - 1); + va |= (0x7f >> (8 - penc)) << 12; + asm volatile("tlbie %0,1" : : "r" (va) : "memory"); + break; + } +} + +static inline void __tlbiel(unsigned long va, unsigned int psize) +{ + unsigned int penc; + + /* clear top 16 bits, non SLS segment */ + va &= ~(0xffffULL << 48); + + switch (psize) { + case MMU_PAGE_4K: + va &= ~0xffful; + asm volatile(".long 0x7c000224 | (%0 << 11) | (0 << 21)" + : : "r"(va) : "memory"); + break; + default: + penc = mmu_psize_defs[psize].penc; + va &= ~((1ul << mmu_psize_defs[psize].shift) - 1); + va |= (0x7f >> (8 - penc)) << 12; + asm volatile(".long 0x7c000224 | (%0 << 11) | (1 << 21)" + : : "r"(va) : "memory"); + break; + } + +} + +static inline void tlbie(unsigned long va, int psize, int local) +{ + unsigned int use_local = local && cpu_has_feature(CPU_FTR_TLBIEL); + int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE); + + if (use_local) + use_local = mmu_psize_defs[psize].tlbiel; + if (lock_tlbie && !use_local) + spin_lock(&native_tlbie_lock); + asm volatile("ptesync": : :"memory"); + if (use_local) { + __tlbiel(va, psize); + asm volatile("ptesync": : :"memory"); + } else { + __tlbie(va, psize); + asm volatile("eieio; tlbsync; ptesync": : :"memory"); + } + if (lock_tlbie && !use_local) + spin_unlock(&native_tlbie_lock); +} + static inline void native_lock_hpte(hpte_t *hptep) { unsigned long *word = &hptep->v; @@ -48,13 +124,19 @@ static inline void native_unlock_hpte(hpte_t *hptep) } long native_hpte_insert(unsigned long hpte_group, unsigned long va, - unsigned long prpn, unsigned long vflags, - unsigned long rflags) + unsigned long pa, unsigned long rflags, + unsigned long vflags, int psize) { hpte_t *hptep = htab_address + hpte_group; unsigned long hpte_v, hpte_r; int i; + if (!(vflags & HPTE_V_BOLTED)) { + DBG_LOW(" insert(group=%lx, va=%016lx, pa=%016lx," + " rflags=%lx, vflags=%lx, psize=%d)\n", + hpte_group, va, pa, rflags, vflags, psize); + } + for (i = 0; i < HPTES_PER_GROUP; i++) { if (! (hptep->v & HPTE_V_VALID)) { /* retry with lock held */ @@ -70,10 +152,13 @@ long native_hpte_insert(unsigned long hpte_group, unsigned long va, if (i == HPTES_PER_GROUP) return -1; - hpte_v = (va >> 23) << HPTE_V_AVPN_SHIFT | vflags | HPTE_V_VALID; - if (vflags & HPTE_V_LARGE) - va &= ~(1UL << HPTE_V_AVPN_SHIFT); - hpte_r = (prpn << HPTE_R_RPN_SHIFT) | rflags; + hpte_v = hpte_encode_v(va, psize) | vflags | HPTE_V_VALID; + hpte_r = hpte_encode_r(pa, psize) | rflags; + + if (!(vflags & HPTE_V_BOLTED)) { + DBG_LOW(" i=%x hpte_v=%016lx, hpte_r=%016lx\n", + i, hpte_v, hpte_r); + } hptep->r = hpte_r; /* Guarantee the second dword is visible before the valid bit */ @@ -96,6 +181,8 @@ static long native_hpte_remove(unsigned long hpte_group) int slot_offset; unsigned long hpte_v; + DBG_LOW(" remove(group=%lx)\n", hpte_group); + /* pick a random entry to start at */ slot_offset = mftb() & 0x7; @@ -126,34 +213,51 @@ static long native_hpte_remove(unsigned long hpte_group) return i; } -static inline void set_pp_bit(unsigned long pp, hpte_t *addr) +static long native_hpte_updatepp(unsigned long slot, unsigned long newpp, + unsigned long va, int psize, int local) { - unsigned long old; - unsigned long *p = &addr->r; - - __asm__ __volatile__( - "1: ldarx %0,0,%3\n\ - rldimi %0,%2,0,61\n\ - stdcx. %0,0,%3\n\ - bne 1b" - : "=&r" (old), "=m" (*p) - : "r" (pp), "r" (p), "m" (*p) - : "cc"); + hpte_t *hptep = htab_address + slot; + unsigned long hpte_v, want_v; + int ret = 0; + + want_v = hpte_encode_v(va, psize); + + DBG_LOW(" update(va=%016lx, avpnv=%016lx, hash=%016lx, newpp=%x)", + va, want_v & HPTE_V_AVPN, slot, newpp); + + native_lock_hpte(hptep); + + hpte_v = hptep->v; + + /* Even if we miss, we need to invalidate the TLB */ + if (!HPTE_V_COMPARE(hpte_v, want_v) || !(hpte_v & HPTE_V_VALID)) { + DBG_LOW(" -> miss\n"); + native_unlock_hpte(hptep); + ret = -1; + } else { + DBG_LOW(" -> hit\n"); + /* Update the HPTE */ + hptep->r = (hptep->r & ~(HPTE_R_PP | HPTE_R_N)) | + (newpp & (HPTE_R_PP | HPTE_R_N)); + native_unlock_hpte(hptep); + } + + /* Ensure it is out of the tlb too. */ + tlbie(va, psize, local); + + return ret; } -/* - * Only works on small pages. Yes its ugly to have to check each slot in - * the group but we only use this during bootup. - */ -static long native_hpte_find(unsigned long vpn) +static long native_hpte_find(unsigned long va, int psize) { hpte_t *hptep; unsigned long hash; unsigned long i, j; long slot; - unsigned long hpte_v; + unsigned long want_v, hpte_v; - hash = hpt_hash(vpn, 0); + hash = hpt_hash(va, mmu_psize_defs[psize].shift); + want_v = hpte_encode_v(va, psize); for (j = 0; j < 2; j++) { slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; @@ -161,7 +265,7 @@ static long native_hpte_find(unsigned long vpn) hptep = htab_address + slot; hpte_v = hptep->v; - if ((HPTE_V_AVPN_VAL(hpte_v) == (vpn >> 11)) + if (HPTE_V_COMPARE(hpte_v, want_v) && (hpte_v & HPTE_V_VALID) && ( !!(hpte_v & HPTE_V_SECONDARY) == j)) { /* HPTE matches */ @@ -177,127 +281,101 @@ static long native_hpte_find(unsigned long vpn) return -1; } -static long native_hpte_updatepp(unsigned long slot, unsigned long newpp, - unsigned long va, int large, int local) -{ - hpte_t *hptep = htab_address + slot; - unsigned long hpte_v; - unsigned long avpn = va >> 23; - int ret = 0; - - if (large) - avpn &= ~1; - - native_lock_hpte(hptep); - - hpte_v = hptep->v; - - /* Even if we miss, we need to invalidate the TLB */ - if ((HPTE_V_AVPN_VAL(hpte_v) != avpn) - || !(hpte_v & HPTE_V_VALID)) { - native_unlock_hpte(hptep); - ret = -1; - } else { - set_pp_bit(newpp, hptep); - native_unlock_hpte(hptep); - } - - /* Ensure it is out of the tlb too */ - if (cpu_has_feature(CPU_FTR_TLBIEL) && !large && local) { - tlbiel(va); - } else { - int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE); - - if (lock_tlbie) - spin_lock(&native_tlbie_lock); - tlbie(va, large); - if (lock_tlbie) - spin_unlock(&native_tlbie_lock); - } - - return ret; -} - /* * Update the page protection bits. Intended to be used to create * guard pages for kernel data structures on pages which are bolted * in the HPT. Assumes pages being operated on will not be stolen. - * Does not work on large pages. * * No need to lock here because we should be the only user. */ -static void native_hpte_updateboltedpp(unsigned long newpp, unsigned long ea) +static void native_hpte_updateboltedpp(unsigned long newpp, unsigned long ea, + int psize) { - unsigned long vsid, va, vpn, flags = 0; + unsigned long vsid, va; long slot; hpte_t *hptep; - int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE); vsid = get_kernel_vsid(ea); va = (vsid << 28) | (ea & 0x0fffffff); - vpn = va >> PAGE_SHIFT; - slot = native_hpte_find(vpn); + slot = native_hpte_find(va, psize); if (slot == -1) panic("could not find page to bolt\n"); hptep = htab_address + slot; - set_pp_bit(newpp, hptep); + /* Update the HPTE */ + hptep->r = (hptep->r & ~(HPTE_R_PP | HPTE_R_N)) | + (newpp & (HPTE_R_PP | HPTE_R_N)); - /* Ensure it is out of the tlb too */ - if (lock_tlbie) - spin_lock_irqsave(&native_tlbie_lock, flags); - tlbie(va, 0); - if (lock_tlbie) - spin_unlock_irqrestore(&native_tlbie_lock, flags); + /* Ensure it is out of the tlb too. */ + tlbie(va, psize, 0); } static void native_hpte_invalidate(unsigned long slot, unsigned long va, - int large, int local) + int psize, int local) { hpte_t *hptep = htab_address + slot; unsigned long hpte_v; - unsigned long avpn = va >> 23; + unsigned long want_v; unsigned long flags; - int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE); - - if (large) - avpn &= ~1; local_irq_save(flags); - native_lock_hpte(hptep); + DBG_LOW(" invalidate(va=%016lx, hash: %x)\n", va, slot); + + want_v = hpte_encode_v(va, psize); + native_lock_hpte(hptep); hpte_v = hptep->v; /* Even if we miss, we need to invalidate the TLB */ - if ((HPTE_V_AVPN_VAL(hpte_v) != avpn) - || !(hpte_v & HPTE_V_VALID)) { + if (!HPTE_V_COMPARE(hpte_v, want_v) || !(hpte_v & HPTE_V_VALID)) native_unlock_hpte(hptep); - } else { + else /* Invalidate the hpte. NOTE: this also unlocks it */ hptep->v = 0; - } - /* Invalidate the tlb */ - if (cpu_has_feature(CPU_FTR_TLBIEL) && !large && local) { - tlbiel(va); - } else { - if (lock_tlbie) - spin_lock(&native_tlbie_lock); - tlbie(va, large); - if (lock_tlbie) - spin_unlock(&native_tlbie_lock); - } + /* Invalidate the TLB */ + tlbie(va, psize, local); + local_irq_restore(flags); } /* + * XXX This need fixing based on page size. It's only used by + * native_hpte_clear() for now which needs fixing too so they + * make a good pair... + */ +static unsigned long slot2va(unsigned long hpte_v, unsigned long slot) +{ + unsigned long avpn = HPTE_V_AVPN_VAL(hpte_v); + unsigned long va; + + va = avpn << 23; + + if (! (hpte_v & HPTE_V_LARGE)) { + unsigned long vpi, pteg; + + pteg = slot / HPTES_PER_GROUP; + if (hpte_v & HPTE_V_SECONDARY) + pteg = ~pteg; + + vpi = ((va >> 28) ^ pteg) & htab_hash_mask; + + va |= vpi << PAGE_SHIFT; + } + + return va; +} + +/* * clear all mappings on kexec. All cpus are in real mode (or they will * be when they isi), and we are the only one left. We rely on our kernel * mapping being 0xC0's and the hardware ignoring those two real bits. * * TODO: add batching support when enabled. remember, no dynamic memory here, * athough there is the control page available... + * + * XXX FIXME: 4k only for now ! */ static void native_hpte_clear(void) { @@ -327,7 +405,7 @@ static void native_hpte_clear(void) if (hpte_v & HPTE_V_VALID) { hptep->v = 0; - tlbie(slot2va(hpte_v, slot), hpte_v & HPTE_V_LARGE); + tlbie(slot2va(hpte_v, slot), MMU_PAGE_4K, 0); } } @@ -335,59 +413,59 @@ static void native_hpte_clear(void) local_irq_restore(flags); } +/* + * Batched hash table flush, we batch the tlbie's to avoid taking/releasing + * the lock all the time + */ static void native_flush_hash_range(unsigned long number, int local) { - unsigned long va, vpn, hash, secondary, slot, flags, avpn; - int i, j; + unsigned long va, hash, index, hidx, shift, slot; hpte_t *hptep; unsigned long hpte_v; + unsigned long want_v; + unsigned long flags; + real_pte_t pte; struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch); - unsigned long large = batch->large; + unsigned long psize = batch->psize; + int i; local_irq_save(flags); - j = 0; for (i = 0; i < number; i++) { - va = batch->vaddr[j]; - if (large) - vpn = va >> HPAGE_SHIFT; - else - vpn = va >> PAGE_SHIFT; - hash = hpt_hash(vpn, large); - secondary = (pte_val(batch->pte[i]) & _PAGE_SECONDARY) >> 15; - if (secondary) - hash = ~hash; - slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; - slot += (pte_val(batch->pte[i]) & _PAGE_GROUP_IX) >> 12; - - hptep = htab_address + slot; - - avpn = va >> 23; - if (large) - avpn &= ~0x1UL; - - native_lock_hpte(hptep); - - hpte_v = hptep->v; - - /* Even if we miss, we need to invalidate the TLB */ - if ((HPTE_V_AVPN_VAL(hpte_v) != avpn) - || !(hpte_v & HPTE_V_VALID)) { - native_unlock_hpte(hptep); - } else { - /* Invalidate the hpte. NOTE: this also unlocks it */ - hptep->v = 0; - } - - j++; + va = batch->vaddr[i]; + pte = batch->pte[i]; + + pte_iterate_hashed_subpages(pte, psize, va, index, shift) { + hash = hpt_hash(va, shift); + hidx = __rpte_to_hidx(pte, index); + if (hidx & _PTEIDX_SECONDARY) + hash = ~hash; + slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; + slot += hidx & _PTEIDX_GROUP_IX; + hptep = htab_address + slot; + want_v = hpte_encode_v(va, psize); + native_lock_hpte(hptep); + hpte_v = hptep->v; + if (!HPTE_V_COMPARE(hpte_v, want_v) || + !(hpte_v & HPTE_V_VALID)) + native_unlock_hpte(hptep); + else + hptep->v = 0; + } pte_iterate_hashed_end(); } - if (cpu_has_feature(CPU_FTR_TLBIEL) && !large && local) { + if (cpu_has_feature(CPU_FTR_TLBIEL) && + mmu_psize_defs[psize].tlbiel && local) { asm volatile("ptesync":::"memory"); - - for (i = 0; i < j; i++) - __tlbiel(batch->vaddr[i]); - + for (i = 0; i < number; i++) { + va = batch->vaddr[i]; + pte = batch->pte[i]; + + pte_iterate_hashed_subpages(pte, psize, va, index, + shift) { + __tlbiel(va, psize); + } pte_iterate_hashed_end(); + } asm volatile("ptesync":::"memory"); } else { int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE); @@ -396,10 +474,15 @@ static void native_flush_hash_range(unsigned long number, int local) spin_lock(&native_tlbie_lock); asm volatile("ptesync":::"memory"); - - for (i = 0; i < j; i++) - __tlbie(batch->vaddr[i], large); - + for (i = 0; i < number; i++) { + va = batch->vaddr[i]; + pte = batch->pte[i]; + + pte_iterate_hashed_subpages(pte, psize, va, index, + shift) { + __tlbie(va, psize); + } pte_iterate_hashed_end(); + } asm volatile("eieio; tlbsync; ptesync":::"memory"); if (lock_tlbie) diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 6e9e05c..706e8a6 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -19,6 +19,7 @@ */ #undef DEBUG +#undef DEBUG_LOW #include <linux/config.h> #include <linux/spinlock.h> @@ -32,7 +33,6 @@ #include <linux/init.h> #include <linux/signal.h> -#include <asm/ppcdebug.h> #include <asm/processor.h> #include <asm/pgtable.h> #include <asm/mmu.h> @@ -59,6 +59,15 @@ #define DBG(fmt...) #endif +#ifdef DEBUG_LOW +#define DBG_LOW(fmt...) udbg_printf(fmt) +#else +#define DBG_LOW(fmt...) +#endif + +#define KB (1024) +#define MB (1024*KB) + /* * Note: pte --> Linux PTE * HPTE --> PowerPC Hashed Page Table Entry @@ -75,99 +84,302 @@ extern unsigned long dart_tablebase; #endif /* CONFIG_U3_DART */ +static unsigned long _SDR1; +struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT]; + hpte_t *htab_address; unsigned long htab_hash_mask; +int mmu_linear_psize = MMU_PAGE_4K; +int mmu_virtual_psize = MMU_PAGE_4K; +#ifdef CONFIG_HUGETLB_PAGE +int mmu_huge_psize = MMU_PAGE_16M; +unsigned int HPAGE_SHIFT; +#endif -unsigned long _SDR1; - -#define KB (1024) -#define MB (1024*KB) - -static inline void loop_forever(void) -{ - volatile unsigned long x = 1; - for(;x;x|=1) - ; -} +/* There are definitions of page sizes arrays to be used when none + * is provided by the firmware. + */ -static inline void create_pte_mapping(unsigned long start, unsigned long end, - unsigned long mode, int large) +/* Pre-POWER4 CPUs (4k pages only) + */ +struct mmu_psize_def mmu_psize_defaults_old[] = { + [MMU_PAGE_4K] = { + .shift = 12, + .sllp = 0, + .penc = 0, + .avpnm = 0, + .tlbiel = 0, + }, +}; + +/* POWER4, GPUL, POWER5 + * + * Support for 16Mb large pages + */ +struct mmu_psize_def mmu_psize_defaults_gp[] = { + [MMU_PAGE_4K] = { + .shift = 12, + .sllp = 0, + .penc = 0, + .avpnm = 0, + .tlbiel = 1, + }, + [MMU_PAGE_16M] = { + .shift = 24, + .sllp = SLB_VSID_L, + .penc = 0, + .avpnm = 0x1UL, + .tlbiel = 0, + }, +}; + + +int htab_bolt_mapping(unsigned long vstart, unsigned long vend, + unsigned long pstart, unsigned long mode, int psize) { - unsigned long addr; - unsigned int step; + unsigned long vaddr, paddr; + unsigned int step, shift; unsigned long tmp_mode; - unsigned long vflags; + int ret = 0; - if (large) { - step = 16*MB; - vflags = HPTE_V_BOLTED | HPTE_V_LARGE; - } else { - step = 4*KB; - vflags = HPTE_V_BOLTED; - } + shift = mmu_psize_defs[psize].shift; + step = 1 << shift; - for (addr = start; addr < end; addr += step) { + for (vaddr = vstart, paddr = pstart; vaddr < vend; + vaddr += step, paddr += step) { unsigned long vpn, hash, hpteg; - unsigned long vsid = get_kernel_vsid(addr); - unsigned long va = (vsid << 28) | (addr & 0xfffffff); - int ret = -1; - - if (large) - vpn = va >> HPAGE_SHIFT; - else - vpn = va >> PAGE_SHIFT; - + unsigned long vsid = get_kernel_vsid(vaddr); + unsigned long va = (vsid << 28) | (vaddr & 0x0fffffff); + vpn = va >> shift; tmp_mode = mode; /* Make non-kernel text non-executable */ - if (!in_kernel_text(addr)) - tmp_mode = mode | HW_NO_EXEC; - - hash = hpt_hash(vpn, large); + if (!in_kernel_text(vaddr)) + tmp_mode = mode | HPTE_R_N; + hash = hpt_hash(va, shift); hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP); + /* The crap below can be cleaned once ppd_md.probe() can + * set up the hash callbacks, thus we can just used the + * normal insert callback here. + */ #ifdef CONFIG_PPC_ISERIES - if (systemcfg->platform & PLATFORM_ISERIES_LPAR) - ret = iSeries_hpte_bolt_or_insert(hpteg, va, - virt_to_abs(addr) >> PAGE_SHIFT, - vflags, tmp_mode); + if (_machine == PLATFORM_ISERIES_LPAR) + ret = iSeries_hpte_insert(hpteg, va, + virt_to_abs(paddr), + tmp_mode, + HPTE_V_BOLTED, + psize); else #endif #ifdef CONFIG_PPC_PSERIES - if (systemcfg->platform & PLATFORM_LPAR) + if (_machine & PLATFORM_LPAR) ret = pSeries_lpar_hpte_insert(hpteg, va, - virt_to_abs(addr) >> PAGE_SHIFT, - vflags, tmp_mode); + virt_to_abs(paddr), + tmp_mode, + HPTE_V_BOLTED, + psize); else #endif #ifdef CONFIG_PPC_MULTIPLATFORM ret = native_hpte_insert(hpteg, va, - virt_to_abs(addr) >> PAGE_SHIFT, - vflags, tmp_mode); + virt_to_abs(paddr), + tmp_mode, HPTE_V_BOLTED, + psize); #endif + if (ret < 0) + break; + } + return ret < 0 ? ret : 0; +} - if (ret == -1) { - ppc64_terminate_msg(0x20, "create_pte_mapping"); - loop_forever(); +static int __init htab_dt_scan_page_sizes(unsigned long node, + const char *uname, int depth, + void *data) +{ + char *type = of_get_flat_dt_prop(node, "device_type", NULL); + u32 *prop; + unsigned long size = 0; + + /* We are scanning "cpu" nodes only */ + if (type == NULL || strcmp(type, "cpu") != 0) + return 0; + + prop = (u32 *)of_get_flat_dt_prop(node, + "ibm,segment-page-sizes", &size); + if (prop != NULL) { + DBG("Page sizes from device-tree:\n"); + size /= 4; + cur_cpu_spec->cpu_features &= ~(CPU_FTR_16M_PAGE); + while(size > 0) { + unsigned int shift = prop[0]; + unsigned int slbenc = prop[1]; + unsigned int lpnum = prop[2]; + unsigned int lpenc = 0; + struct mmu_psize_def *def; + int idx = -1; + + size -= 3; prop += 3; + while(size > 0 && lpnum) { + if (prop[0] == shift) + lpenc = prop[1]; + prop += 2; size -= 2; + lpnum--; + } + switch(shift) { + case 0xc: + idx = MMU_PAGE_4K; + break; + case 0x10: + idx = MMU_PAGE_64K; + break; + case 0x14: + idx = MMU_PAGE_1M; + break; + case 0x18: + idx = MMU_PAGE_16M; + cur_cpu_spec->cpu_features |= CPU_FTR_16M_PAGE; + break; + case 0x22: + idx = MMU_PAGE_16G; + break; + } + if (idx < 0) + continue; + def = &mmu_psize_defs[idx]; + def->shift = shift; + if (shift <= 23) + def->avpnm = 0; + else + def->avpnm = (1 << (shift - 23)) - 1; + def->sllp = slbenc; + def->penc = lpenc; + /* We don't know for sure what's up with tlbiel, so + * for now we only set it for 4K and 64K pages + */ + if (idx == MMU_PAGE_4K || idx == MMU_PAGE_64K) + def->tlbiel = 1; + else + def->tlbiel = 0; + + DBG(" %d: shift=%02x, sllp=%04x, avpnm=%08x, " + "tlbiel=%d, penc=%d\n", + idx, shift, def->sllp, def->avpnm, def->tlbiel, + def->penc); } + return 1; + } + return 0; +} + + +static void __init htab_init_page_sizes(void) +{ + int rc; + + /* Default to 4K pages only */ + memcpy(mmu_psize_defs, mmu_psize_defaults_old, + sizeof(mmu_psize_defaults_old)); + + /* + * Try to find the available page sizes in the device-tree + */ + rc = of_scan_flat_dt(htab_dt_scan_page_sizes, NULL); + if (rc != 0) /* Found */ + goto found; + + /* + * Not in the device-tree, let's fallback on known size + * list for 16M capable GP & GR + */ + if ((_machine != PLATFORM_ISERIES_LPAR) && + cpu_has_feature(CPU_FTR_16M_PAGE)) + memcpy(mmu_psize_defs, mmu_psize_defaults_gp, + sizeof(mmu_psize_defaults_gp)); + found: + /* + * Pick a size for the linear mapping. Currently, we only support + * 16M, 1M and 4K which is the default + */ + if (mmu_psize_defs[MMU_PAGE_16M].shift) + mmu_linear_psize = MMU_PAGE_16M; + else if (mmu_psize_defs[MMU_PAGE_1M].shift) + mmu_linear_psize = MMU_PAGE_1M; + + /* + * Pick a size for the ordinary pages. Default is 4K, we support + * 64K if cache inhibited large pages are supported by the + * processor + */ +#ifdef CONFIG_PPC_64K_PAGES + if (mmu_psize_defs[MMU_PAGE_64K].shift && + cpu_has_feature(CPU_FTR_CI_LARGE_PAGE)) + mmu_virtual_psize = MMU_PAGE_64K; +#endif + + printk(KERN_INFO "Page orders: linear mapping = %d, others = %d\n", + mmu_psize_defs[mmu_linear_psize].shift, + mmu_psize_defs[mmu_virtual_psize].shift); + +#ifdef CONFIG_HUGETLB_PAGE + /* Init large page size. Currently, we pick 16M or 1M depending + * on what is available + */ + if (mmu_psize_defs[MMU_PAGE_16M].shift) + mmu_huge_psize = MMU_PAGE_16M; + /* With 4k/4level pagetables, we can't (for now) cope with a + * huge page size < PMD_SIZE */ + else if (mmu_psize_defs[MMU_PAGE_1M].shift) + mmu_huge_psize = MMU_PAGE_1M; + + /* Calculate HPAGE_SHIFT and sanity check it */ + if (mmu_psize_defs[mmu_huge_psize].shift > MIN_HUGEPTE_SHIFT && + mmu_psize_defs[mmu_huge_psize].shift < SID_SHIFT) + HPAGE_SHIFT = mmu_psize_defs[mmu_huge_psize].shift; + else + HPAGE_SHIFT = 0; /* No huge pages dude ! */ +#endif /* CONFIG_HUGETLB_PAGE */ +} + +static int __init htab_dt_scan_pftsize(unsigned long node, + const char *uname, int depth, + void *data) +{ + char *type = of_get_flat_dt_prop(node, "device_type", NULL); + u32 *prop; + + /* We are scanning "cpu" nodes only */ + if (type == NULL || strcmp(type, "cpu") != 0) + return 0; + + prop = (u32 *)of_get_flat_dt_prop(node, "ibm,pft-size", NULL); + if (prop != NULL) { + /* pft_size[0] is the NUMA CEC cookie */ + ppc64_pft_size = prop[1]; + return 1; } + return 0; } -static unsigned long get_hashtable_size(void) +static unsigned long __init htab_get_table_size(void) { - unsigned long rnd_mem_size, pteg_count; + unsigned long mem_size, rnd_mem_size, pteg_count; - /* If hash size wasn't obtained in prom.c, we calculate it now based on - * the total RAM size + /* If hash size isn't already provided by the platform, we try to + * retreive it from the device-tree. If it's not there neither, we + * calculate it now based on the total RAM size */ + if (ppc64_pft_size == 0) + of_scan_flat_dt(htab_dt_scan_pftsize, NULL); if (ppc64_pft_size) return 1UL << ppc64_pft_size; /* round mem_size up to next power of 2 */ - rnd_mem_size = 1UL << __ilog2(systemcfg->physicalMemorySize); - if (rnd_mem_size < systemcfg->physicalMemorySize) + mem_size = lmb_phys_mem_size(); + rnd_mem_size = 1UL << __ilog2(mem_size); + if (rnd_mem_size < mem_size) rnd_mem_size <<= 1; /* # pages / 2 */ @@ -176,33 +388,40 @@ static unsigned long get_hashtable_size(void) return pteg_count << 7; } +#ifdef CONFIG_MEMORY_HOTPLUG +void create_section_mapping(unsigned long start, unsigned long end) +{ + BUG_ON(htab_bolt_mapping(start, end, start, + _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX, + mmu_linear_psize)); +} +#endif /* CONFIG_MEMORY_HOTPLUG */ + void __init htab_initialize(void) { unsigned long table, htab_size_bytes; unsigned long pteg_count; unsigned long mode_rw; - int i, use_largepages = 0; unsigned long base = 0, size = 0; + int i; + extern unsigned long tce_alloc_start, tce_alloc_end; DBG(" -> htab_initialize()\n"); + /* Initialize page sizes */ + htab_init_page_sizes(); + /* * Calculate the required size of the htab. We want the number of * PTEGs to equal one half the number of real pages. */ - htab_size_bytes = get_hashtable_size(); + htab_size_bytes = htab_get_table_size(); pteg_count = htab_size_bytes >> 7; - /* For debug, make the HTAB 1/8 as big as it normally would be. */ - ifppcdebug(PPCDBG_HTABSIZE) { - pteg_count >>= 3; - htab_size_bytes = pteg_count << 7; - } - htab_hash_mask = pteg_count - 1; - if (systemcfg->platform & PLATFORM_LPAR) { + if (platform_is_lpar()) { /* Using a hypervisor which owns the htab */ htab_address = NULL; _SDR1 = 0; @@ -211,14 +430,11 @@ void __init htab_initialize(void) * the absolute address space. */ table = lmb_alloc(htab_size_bytes, htab_size_bytes); + BUG_ON(table == 0); DBG("Hash table allocated at %lx, size: %lx\n", table, htab_size_bytes); - if ( !table ) { - ppc64_terminate_msg(0x20, "hpt space"); - loop_forever(); - } htab_address = abs_to_virt(table); /* htab absolute addr + encoded htabsize */ @@ -226,6 +442,9 @@ void __init htab_initialize(void) /* Initialize the HPT with no entries */ memset((void *)table, 0, htab_size_bytes); + + /* Set SDR1 */ + mtspr(SPRN_SDR1, _SDR1); } mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX; @@ -234,8 +453,6 @@ void __init htab_initialize(void) * _NOT_ map it to avoid cache paradoxes as it's remapped non * cacheable later on */ - if (cpu_has_feature(CPU_FTR_16M_PAGE)) - use_largepages = 1; /* create bolted the linear mapping in the hash table */ for (i=0; i < lmb.memory.cnt; i++) { @@ -246,27 +463,32 @@ void __init htab_initialize(void) #ifdef CONFIG_U3_DART /* Do not map the DART space. Fortunately, it will be aligned - * in such a way that it will not cross two lmb regions and will - * fit within a single 16Mb page. - * The DART space is assumed to be a full 16Mb region even if we - * only use 2Mb of that space. We will use more of it later for - * AGP GART. We have to use a full 16Mb large page. + * in such a way that it will not cross two lmb regions and + * will fit within a single 16Mb page. + * The DART space is assumed to be a full 16Mb region even if + * we only use 2Mb of that space. We will use more of it later + * for AGP GART. We have to use a full 16Mb large page. */ DBG("DART base: %lx\n", dart_tablebase); if (dart_tablebase != 0 && dart_tablebase >= base && dart_tablebase < (base + size)) { if (base != dart_tablebase) - create_pte_mapping(base, dart_tablebase, mode_rw, - use_largepages); + BUG_ON(htab_bolt_mapping(base, dart_tablebase, + base, mode_rw, + mmu_linear_psize)); if ((base + size) > (dart_tablebase + 16*MB)) - create_pte_mapping(dart_tablebase + 16*MB, base + size, - mode_rw, use_largepages); + BUG_ON(htab_bolt_mapping(dart_tablebase+16*MB, + base + size, + dart_tablebase+16*MB, + mode_rw, + mmu_linear_psize)); continue; } #endif /* CONFIG_U3_DART */ - create_pte_mapping(base, base + size, mode_rw, use_largepages); - } + BUG_ON(htab_bolt_mapping(base, base + size, base, + mode_rw, mmu_linear_psize)); + } /* * If we have a memory_limit and we've allocated TCEs then we need to @@ -282,8 +504,9 @@ void __init htab_initialize(void) if (base + size >= tce_alloc_start) tce_alloc_start = base + size + 1; - create_pte_mapping(tce_alloc_start, tce_alloc_end, - mode_rw, use_largepages); + BUG_ON(htab_bolt_mapping(tce_alloc_start, tce_alloc_end, + tce_alloc_start, mode_rw, + mmu_linear_psize)); } DBG(" <- htab_initialize()\n"); @@ -291,6 +514,12 @@ void __init htab_initialize(void) #undef KB #undef MB +void __init htab_initialize_secondary(void) +{ + if (!platform_is_lpar()) + mtspr(SPRN_SDR1, _SDR1); +} + /* * Called by asm hashtable.S for doing lazy icache flush */ @@ -309,7 +538,7 @@ unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap) __flush_dcache_icache(page_address(page)); set_bit(PG_arch_1, &page->flags); } else - pp |= HW_NO_EXEC; + pp |= HPTE_R_N; } return pp; } @@ -325,94 +554,169 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) unsigned long vsid; struct mm_struct *mm; pte_t *ptep; - int ret; - int user_region = 0; - int local = 0; cpumask_t tmp; + int rc, user_region = 0, local = 0; - if ((ea & ~REGION_MASK) >= PGTABLE_RANGE) - return 1; + DBG_LOW("hash_page(ea=%016lx, access=%lx, trap=%lx\n", + ea, access, trap); + if ((ea & ~REGION_MASK) >= PGTABLE_RANGE) { + DBG_LOW(" out of pgtable range !\n"); + return 1; + } + + /* Get region & vsid */ switch (REGION_ID(ea)) { case USER_REGION_ID: user_region = 1; mm = current->mm; - if (! mm) + if (! mm) { + DBG_LOW(" user region with no mm !\n"); return 1; - + } vsid = get_vsid(mm->context.id, ea); break; case VMALLOC_REGION_ID: mm = &init_mm; vsid = get_kernel_vsid(ea); break; -#if 0 - case KERNEL_REGION_ID: - /* - * Should never get here - entire 0xC0... region is bolted. - * Send the problem up to do_page_fault - */ -#endif default: /* Not a valid range * Send the problem up to do_page_fault */ return 1; - break; } + DBG_LOW(" mm=%p, mm->pgdir=%p, vsid=%016lx\n", mm, mm->pgd, vsid); + /* Get pgdir */ pgdir = mm->pgd; - if (pgdir == NULL) return 1; + /* Check CPU locality */ tmp = cpumask_of_cpu(smp_processor_id()); if (user_region && cpus_equal(mm->cpu_vm_mask, tmp)) local = 1; - /* Is this a huge page ? */ - if (unlikely(in_hugepage_area(mm->context, ea))) - ret = hash_huge_page(mm, access, ea, vsid, local); - else { - ptep = find_linux_pte(pgdir, ea); - if (ptep == NULL) - return 1; - ret = __hash_page(ea, access, vsid, ptep, trap, local); + /* Handle hugepage regions */ + if (unlikely(in_hugepage_area(mm->context, ea))) { + DBG_LOW(" -> huge page !\n"); + return hash_huge_page(mm, access, ea, vsid, local); + } + + /* Get PTE and page size from page tables */ + ptep = find_linux_pte(pgdir, ea); + if (ptep == NULL || !pte_present(*ptep)) { + DBG_LOW(" no PTE !\n"); + return 1; + } + +#ifndef CONFIG_PPC_64K_PAGES + DBG_LOW(" i-pte: %016lx\n", pte_val(*ptep)); +#else + DBG_LOW(" i-pte: %016lx %016lx\n", pte_val(*ptep), + pte_val(*(ptep + PTRS_PER_PTE))); +#endif + /* Pre-check access permissions (will be re-checked atomically + * in __hash_page_XX but this pre-check is a fast path + */ + if (access & ~pte_val(*ptep)) { + DBG_LOW(" no access !\n"); + return 1; } - return ret; + /* Do actual hashing */ +#ifndef CONFIG_PPC_64K_PAGES + rc = __hash_page_4K(ea, access, vsid, ptep, trap, local); +#else + if (mmu_virtual_psize == MMU_PAGE_64K) + rc = __hash_page_64K(ea, access, vsid, ptep, trap, local); + else + rc = __hash_page_4K(ea, access, vsid, ptep, trap, local); +#endif /* CONFIG_PPC_64K_PAGES */ + +#ifndef CONFIG_PPC_64K_PAGES + DBG_LOW(" o-pte: %016lx\n", pte_val(*ptep)); +#else + DBG_LOW(" o-pte: %016lx %016lx\n", pte_val(*ptep), + pte_val(*(ptep + PTRS_PER_PTE))); +#endif + DBG_LOW(" -> rc=%d\n", rc); + return rc; } -void flush_hash_page(unsigned long va, pte_t pte, int local) +void hash_preload(struct mm_struct *mm, unsigned long ea, + unsigned long access, unsigned long trap) { - unsigned long vpn, hash, secondary, slot; - unsigned long huge = pte_huge(pte); + unsigned long vsid; + void *pgdir; + pte_t *ptep; + cpumask_t mask; + unsigned long flags; + int local = 0; + + /* We don't want huge pages prefaulted for now + */ + if (unlikely(in_hugepage_area(mm->context, ea))) + return; + + DBG_LOW("hash_preload(mm=%p, mm->pgdir=%p, ea=%016lx, access=%lx," + " trap=%lx\n", mm, mm->pgd, ea, access, trap); + + /* Get PTE, VSID, access mask */ + pgdir = mm->pgd; + if (pgdir == NULL) + return; + ptep = find_linux_pte(pgdir, ea); + if (!ptep) + return; + vsid = get_vsid(mm->context.id, ea); - if (huge) - vpn = va >> HPAGE_SHIFT; + /* Hash it in */ + local_irq_save(flags); + mask = cpumask_of_cpu(smp_processor_id()); + if (cpus_equal(mm->cpu_vm_mask, mask)) + local = 1; +#ifndef CONFIG_PPC_64K_PAGES + __hash_page_4K(ea, access, vsid, ptep, trap, local); +#else + if (mmu_virtual_psize == MMU_PAGE_64K) + __hash_page_64K(ea, access, vsid, ptep, trap, local); else - vpn = va >> PAGE_SHIFT; - hash = hpt_hash(vpn, huge); - secondary = (pte_val(pte) & _PAGE_SECONDARY) >> 15; - if (secondary) - hash = ~hash; - slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; - slot += (pte_val(pte) & _PAGE_GROUP_IX) >> 12; - - ppc_md.hpte_invalidate(slot, va, huge, local); + __hash_page_4K(ea, access, vsid, ptep, trap, local); +#endif /* CONFIG_PPC_64K_PAGES */ + local_irq_restore(flags); +} + +void flush_hash_page(unsigned long va, real_pte_t pte, int psize, int local) +{ + unsigned long hash, index, shift, hidx, slot; + + DBG_LOW("flush_hash_page(va=%016x)\n", va); + pte_iterate_hashed_subpages(pte, psize, va, index, shift) { + hash = hpt_hash(va, shift); + hidx = __rpte_to_hidx(pte, index); + if (hidx & _PTEIDX_SECONDARY) + hash = ~hash; + slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; + slot += hidx & _PTEIDX_GROUP_IX; + DBG_LOW(" sub %d: hash=%x, hidx=%x\n", index, slot, hidx); + ppc_md.hpte_invalidate(slot, va, psize, local); + } pte_iterate_hashed_end(); } void flush_hash_range(unsigned long number, int local) { - if (ppc_md.flush_hash_range) { + if (ppc_md.flush_hash_range) ppc_md.flush_hash_range(number, local); - } else { + else { int i; struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch); for (i = 0; i < number; i++) - flush_hash_page(batch->vaddr[i], batch->pte[i], local); + flush_hash_page(batch->vaddr[i], batch->pte[i], + batch->psize, local); } } @@ -452,6 +756,18 @@ void __init htab_finish_init(void) extern unsigned int *htab_call_hpte_remove; extern unsigned int *htab_call_hpte_updatepp; +#ifdef CONFIG_PPC_64K_PAGES + extern unsigned int *ht64_call_hpte_insert1; + extern unsigned int *ht64_call_hpte_insert2; + extern unsigned int *ht64_call_hpte_remove; + extern unsigned int *ht64_call_hpte_updatepp; + + make_bl(ht64_call_hpte_insert1, ppc_md.hpte_insert); + make_bl(ht64_call_hpte_insert2, ppc_md.hpte_insert); + make_bl(ht64_call_hpte_remove, ppc_md.hpte_remove); + make_bl(ht64_call_hpte_updatepp, ppc_md.hpte_updatepp); +#endif /* CONFIG_PPC_64K_PAGES */ + make_bl(htab_call_hpte_insert1, ppc_md.hpte_insert); make_bl(htab_call_hpte_insert2, ppc_md.hpte_insert); make_bl(htab_call_hpte_remove, ppc_md.hpte_remove); diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 0ea0994..426c269 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -47,10 +47,25 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) pu = pud_offset(pg, addr); if (!pud_none(*pu)) { pm = pmd_offset(pu, addr); +#ifdef CONFIG_PPC_64K_PAGES + /* Currently, we use the normal PTE offset within full + * size PTE pages, thus our huge PTEs are scattered in + * the PTE page and we do waste some. We may change + * that in the future, but the current mecanism keeps + * things much simpler + */ + if (!pmd_none(*pm)) { + /* Note: pte_offset_* are all equivalent on + * ppc64 as we don't have HIGHMEM + */ + pt = pte_offset_kernel(pm, addr); + return pt; + } +#else /* CONFIG_PPC_64K_PAGES */ + /* On 4k pages, we put huge PTEs in the PMD page */ pt = (pte_t *)pm; - BUG_ON(!pmd_none(*pm) - && !(pte_present(*pt) && pte_huge(*pt))); return pt; +#endif /* CONFIG_PPC_64K_PAGES */ } } @@ -74,9 +89,16 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) if (pu) { pm = pmd_alloc(mm, pu, addr); if (pm) { +#ifdef CONFIG_PPC_64K_PAGES + /* See comment in huge_pte_offset. Note that if we ever + * want to put the page size in the PMD, we would have + * to open code our own pte_alloc* function in order + * to populate and set the size atomically + */ + pt = pte_alloc_map(mm, pm, addr); +#else /* CONFIG_PPC_64K_PAGES */ pt = (pte_t *)pm; - BUG_ON(!pmd_none(*pm) - && !(pte_present(*pt) && pte_huge(*pt))); +#endif /* CONFIG_PPC_64K_PAGES */ return pt; } } @@ -84,35 +106,29 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) return NULL; } -#define HUGEPTE_BATCH_SIZE (HPAGE_SIZE / PMD_SIZE) - void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) { - int i; - if (pte_present(*ptep)) { - pte_clear(mm, addr, ptep); + /* We open-code pte_clear because we need to pass the right + * argument to hpte_update (huge / !huge) + */ + unsigned long old = pte_update(ptep, ~0UL); + if (old & _PAGE_HASHPTE) + hpte_update(mm, addr & HPAGE_MASK, ptep, old, 1); flush_tlb_pending(); } - - for (i = 0; i < HUGEPTE_BATCH_SIZE; i++) { - *ptep = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS); - ptep++; - } + *ptep = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS); } pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { unsigned long old = pte_update(ptep, ~0UL); - int i; if (old & _PAGE_HASHPTE) - hpte_update(mm, addr, old, 0); - - for (i = 1; i < HUGEPTE_BATCH_SIZE; i++) - ptep[i] = __pte(0); + hpte_update(mm, addr & HPAGE_MASK, ptep, old, 1); + *ptep = __pte(0); return __pte(old); } @@ -196,6 +212,12 @@ static int prepare_high_area_for_htlb(struct mm_struct *mm, unsigned long area) BUG_ON(area >= NUM_HIGH_AREAS); + /* Hack, so that each addresses is controlled by exactly one + * of the high or low area bitmaps, the first high area starts + * at 4GB, not 0 */ + if (start == 0) + start = 0x100000000UL; + /* Check no VMAs are in the region */ vma = find_vma(mm, start); if (vma && (vma->vm_start < end)) @@ -563,6 +585,8 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr, int lastshift; u16 areamask, curareas; + if (HPAGE_SHIFT == 0) + return -EINVAL; if (len & ~HPAGE_MASK) return -EINVAL; @@ -619,19 +643,15 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access, unsigned long ea, unsigned long vsid, int local) { pte_t *ptep; - unsigned long va, vpn; - pte_t old_pte, new_pte; - unsigned long rflags, prpn; + unsigned long old_pte, new_pte; + unsigned long va, rflags, pa; long slot; int err = 1; - spin_lock(&mm->page_table_lock); - ptep = huge_pte_offset(mm, ea); /* Search the Linux page table for a match with va */ va = (vsid << 28) | (ea & 0x0fffffff); - vpn = va >> HPAGE_SHIFT; /* * If no pte found or not present, send the problem up to @@ -640,8 +660,6 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access, if (unlikely(!ptep || pte_none(*ptep))) goto out; -/* BUG_ON(pte_bad(*ptep)); */ - /* * Check the user's access rights to the page. If access should be * prevented then send the problem up to do_page_fault. @@ -661,58 +679,64 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access, */ - old_pte = *ptep; - new_pte = old_pte; - - rflags = 0x2 | (! (pte_val(new_pte) & _PAGE_RW)); + do { + old_pte = pte_val(*ptep); + if (old_pte & _PAGE_BUSY) + goto out; + new_pte = old_pte | _PAGE_BUSY | + _PAGE_ACCESSED | _PAGE_HASHPTE; + } while(old_pte != __cmpxchg_u64((unsigned long *)ptep, + old_pte, new_pte)); + + rflags = 0x2 | (!(new_pte & _PAGE_RW)); /* _PAGE_EXEC -> HW_NO_EXEC since it's inverted */ - rflags |= ((pte_val(new_pte) & _PAGE_EXEC) ? 0 : HW_NO_EXEC); + rflags |= ((new_pte & _PAGE_EXEC) ? 0 : HPTE_R_N); /* Check if pte already has an hpte (case 2) */ - if (unlikely(pte_val(old_pte) & _PAGE_HASHPTE)) { + if (unlikely(old_pte & _PAGE_HASHPTE)) { /* There MIGHT be an HPTE for this pte */ unsigned long hash, slot; - hash = hpt_hash(vpn, 1); - if (pte_val(old_pte) & _PAGE_SECONDARY) + hash = hpt_hash(va, HPAGE_SHIFT); + if (old_pte & _PAGE_F_SECOND) hash = ~hash; slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; - slot += (pte_val(old_pte) & _PAGE_GROUP_IX) >> 12; + slot += (old_pte & _PAGE_F_GIX) >> 12; if (ppc_md.hpte_updatepp(slot, rflags, va, 1, local) == -1) - pte_val(old_pte) &= ~_PAGE_HPTEFLAGS; + old_pte &= ~_PAGE_HPTEFLAGS; } - if (likely(!(pte_val(old_pte) & _PAGE_HASHPTE))) { - unsigned long hash = hpt_hash(vpn, 1); + if (likely(!(old_pte & _PAGE_HASHPTE))) { + unsigned long hash = hpt_hash(va, HPAGE_SHIFT); unsigned long hpte_group; - prpn = pte_pfn(old_pte); + pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT; repeat: hpte_group = ((hash & htab_hash_mask) * HPTES_PER_GROUP) & ~0x7UL; - /* Update the linux pte with the HPTE slot */ - pte_val(new_pte) &= ~_PAGE_HPTEFLAGS; - pte_val(new_pte) |= _PAGE_HASHPTE; + /* clear HPTE slot informations in new PTE */ + new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HASHPTE; /* Add in WIMG bits */ /* XXX We should store these in the pte */ + /* --BenH: I think they are ... */ rflags |= _PAGE_COHERENT; - slot = ppc_md.hpte_insert(hpte_group, va, prpn, - HPTE_V_LARGE, rflags); + /* Insert into the hash table, primary slot */ + slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags, 0, + mmu_huge_psize); /* Primary is full, try the secondary */ if (unlikely(slot == -1)) { - pte_val(new_pte) |= _PAGE_SECONDARY; + new_pte |= _PAGE_F_SECOND; hpte_group = ((~hash & htab_hash_mask) * HPTES_PER_GROUP) & ~0x7UL; - slot = ppc_md.hpte_insert(hpte_group, va, prpn, - HPTE_V_LARGE | + slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags, HPTE_V_SECONDARY, - rflags); + mmu_huge_psize); if (slot == -1) { if (mftb() & 0x1) hpte_group = ((hash & htab_hash_mask) * @@ -726,20 +750,18 @@ repeat: if (unlikely(slot == -2)) panic("hash_huge_page: pte_insert failed\n"); - pte_val(new_pte) |= (slot<<12) & _PAGE_GROUP_IX; - - /* - * No need to use ldarx/stdcx here because all who - * might be updating the pte will hold the - * page_table_lock - */ - *ptep = new_pte; + new_pte |= (slot << 12) & _PAGE_F_GIX; } + /* + * No need to use ldarx/stdcx here because all who + * might be updating the pte will hold the + * page_table_lock + */ + *ptep = __pte(new_pte & ~_PAGE_BUSY); + err = 0; out: - spin_unlock(&mm->page_table_lock); - return err; } diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 4612a79..7d4b8b5 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -84,9 +84,6 @@ void MMU_init(void); /* XXX should be in current.h -- paulus */ extern struct task_struct *current_set[NR_CPUS]; -char *klimit = _end; -struct device_node *memory_node; - extern int init_bootmem_done; /* diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index b0fc822..1134f70 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -20,6 +20,8 @@ * */ +#undef DEBUG + #include <linux/config.h> #include <linux/signal.h> #include <linux/sched.h> @@ -57,7 +59,6 @@ #include <asm/processor.h> #include <asm/mmzone.h> #include <asm/cputable.h> -#include <asm/ppcdebug.h> #include <asm/sections.h> #include <asm/system.h> #include <asm/iommu.h> @@ -65,6 +66,12 @@ #include <asm/vdso.h> #include <asm/imalloc.h> +#ifdef DEBUG +#define DBG(fmt...) printk(fmt) +#else +#define DBG(fmt...) +#endif + #if PGTABLE_RANGE > USER_VSID_RANGE #warning Limited user VSID range means pagetable space is wasted #endif @@ -73,8 +80,6 @@ #warning TASK_SIZE is smaller than it needs to be. #endif -unsigned long klimit = (unsigned long)_end; - /* max amount of RAM to use */ unsigned long __max_memory; @@ -188,12 +193,21 @@ static void zero_ctor(void *addr, kmem_cache_t *cache, unsigned long flags) memset(addr, 0, kmem_cache_size(cache)); } -static const int pgtable_cache_size[2] = { +#ifdef CONFIG_PPC_64K_PAGES +static const unsigned int pgtable_cache_size[3] = { + PTE_TABLE_SIZE, PMD_TABLE_SIZE, PGD_TABLE_SIZE +}; +static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = { + "pte_pmd_cache", "pmd_cache", "pgd_cache", +}; +#else +static const unsigned int pgtable_cache_size[2] = { PTE_TABLE_SIZE, PMD_TABLE_SIZE }; static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = { "pgd_pte_cache", "pud_pmd_cache", }; +#endif /* CONFIG_PPC_64K_PAGES */ kmem_cache_t *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)]; @@ -201,19 +215,16 @@ void pgtable_cache_init(void) { int i; - BUILD_BUG_ON(PTE_TABLE_SIZE != pgtable_cache_size[PTE_CACHE_NUM]); - BUILD_BUG_ON(PMD_TABLE_SIZE != pgtable_cache_size[PMD_CACHE_NUM]); - BUILD_BUG_ON(PUD_TABLE_SIZE != pgtable_cache_size[PUD_CACHE_NUM]); - BUILD_BUG_ON(PGD_TABLE_SIZE != pgtable_cache_size[PGD_CACHE_NUM]); - for (i = 0; i < ARRAY_SIZE(pgtable_cache_size); i++) { int size = pgtable_cache_size[i]; const char *name = pgtable_cache_name[i]; + DBG("Allocating page table cache %s (#%d) " + "for size: %08x...\n", name, i, size); pgtable_cache[i] = kmem_cache_create(name, size, size, - SLAB_HWCACHE_ALIGN - | SLAB_MUST_HWCACHE_ALIGN, + SLAB_HWCACHE_ALIGN | + SLAB_MUST_HWCACHE_ALIGN, zero_ctor, NULL); if (! pgtable_cache[i]) diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 117b000..1dd3cc6 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -61,6 +61,9 @@ int init_bootmem_done; int mem_init_done; unsigned long memory_limit; +extern void hash_preload(struct mm_struct *mm, unsigned long ea, + unsigned long access, unsigned long trap); + /* * This is called by /dev/mem to know if a given address has to * be mapped non-cacheable or not @@ -107,6 +110,7 @@ EXPORT_SYMBOL(phys_mem_access_prot); void online_page(struct page *page) { ClearPageReserved(page); + set_page_count(page, 0); free_cold_page(page); totalram_pages++; num_physpages++; @@ -124,6 +128,9 @@ int __devinit add_memory(u64 start, u64 size) unsigned long start_pfn = start >> PAGE_SHIFT; unsigned long nr_pages = size >> PAGE_SHIFT; + start += KERNELBASE; + create_section_mapping(start, start + size); + /* this should work for most non-highmem platforms */ zone = pgdata->node_zones; @@ -355,7 +362,7 @@ void __init mem_init(void) } codesize = (unsigned long)&_sdata - (unsigned long)&_stext; - datasize = (unsigned long)&__init_begin - (unsigned long)&_sdata; + datasize = (unsigned long)&_edata - (unsigned long)&_sdata; initsize = (unsigned long)&__init_end - (unsigned long)&__init_begin; bsssize = (unsigned long)&__bss_stop - (unsigned long)&__bss_start; @@ -493,18 +500,10 @@ EXPORT_SYMBOL(flush_icache_user_range); void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte) { - /* handle i-cache coherency */ - unsigned long pfn = pte_pfn(pte); -#ifdef CONFIG_PPC32 - pmd_t *pmd; -#else - unsigned long vsid; - void *pgdir; - pte_t *ptep; - int local = 0; - cpumask_t tmp; - unsigned long flags; +#ifdef CONFIG_PPC_STD_MMU + unsigned long access = 0, trap; #endif + unsigned long pfn = pte_pfn(pte); /* handle i-cache coherency */ if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE) && @@ -535,30 +534,21 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, /* We only want HPTEs for linux PTEs that have _PAGE_ACCESSED set */ if (!pte_young(pte) || address >= TASK_SIZE) return; -#ifdef CONFIG_PPC32 - if (Hash == 0) - return; - pmd = pmd_offset(pgd_offset(vma->vm_mm, address), address); - if (!pmd_none(*pmd)) - add_hash_page(vma->vm_mm->context, address, pmd_val(*pmd)); -#else - pgdir = vma->vm_mm->pgd; - if (pgdir == NULL) - return; - ptep = find_linux_pte(pgdir, address); - if (!ptep) + /* We try to figure out if we are coming from an instruction + * access fault and pass that down to __hash_page so we avoid + * double-faulting on execution of fresh text. We have to test + * for regs NULL since init will get here first thing at boot + * + * We also avoid filling the hash if not coming from a fault + */ + if (current->thread.regs == NULL) return; - - vsid = get_vsid(vma->vm_mm->context.id, address); - - local_irq_save(flags); - tmp = cpumask_of_cpu(smp_processor_id()); - if (cpus_equal(vma->vm_mm->cpu_vm_mask, tmp)) - local = 1; - - __hash_page(address, 0, vsid, ptep, 0x300, local); - local_irq_restore(flags); -#endif -#endif + trap = TRAP(current->thread.regs); + if (trap == 0x400) + access |= _PAGE_EXEC; + else if (trap != 0x300) + return; + hash_preload(vma->vm_mm, address, access, trap); +#endif /* CONFIG_PPC_STD_MMU */ } diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 4035cad..da09ba0 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -21,6 +21,7 @@ #include <asm/machdep.h> #include <asm/abs_addr.h> #include <asm/system.h> +#include <asm/smp.h> static int numa_enabled = 1; diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index b79a782..c7f7bb6 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -59,7 +59,6 @@ #include <asm/processor.h> #include <asm/mmzone.h> #include <asm/cputable.h> -#include <asm/ppcdebug.h> #include <asm/sections.h> #include <asm/system.h> #include <asm/iommu.h> @@ -101,7 +100,6 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags) pud_t *pudp; pmd_t *pmdp; pte_t *ptep; - unsigned long vsid; if (mem_init_done) { pgdp = pgd_offset_k(ea); @@ -117,27 +115,17 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags) set_pte_at(&init_mm, ea, ptep, pfn_pte(pa >> PAGE_SHIFT, __pgprot(flags))); } else { - unsigned long va, vpn, hash, hpteg; - /* * If the mm subsystem is not fully up, we cannot create a * linux page table entry for this mapping. Simply bolt an * entry in the hardware page table. + * */ - vsid = get_kernel_vsid(ea); - va = (vsid << 28) | (ea & 0xFFFFFFF); - vpn = va >> PAGE_SHIFT; - - hash = hpt_hash(vpn, 0); - - hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP); - - /* Panic if a pte grpup is full */ - if (ppc_md.hpte_insert(hpteg, va, pa >> PAGE_SHIFT, - HPTE_V_BOLTED, - _PAGE_NO_CACHE|_PAGE_GUARDED|PP_RWXX) - == -1) { - panic("map_io_page: could not insert mapping"); + if (htab_bolt_mapping(ea, ea + PAGE_SIZE, pa, flags, + mmu_virtual_psize)) { + printk(KERN_ERR "Failed to do bolted mapping IO " + "memory at %016lx !\n", pa); + return -ENOMEM; } } return 0; diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c index cef9e83..ed7fcfe 100644 --- a/arch/powerpc/mm/ppc_mmu_32.c +++ b/arch/powerpc/mm/ppc_mmu_32.c @@ -179,6 +179,21 @@ void __init setbat(int index, unsigned long virt, unsigned long phys, } /* + * Preload a translation in the hash table + */ +void hash_preload(struct mm_struct *mm, unsigned long ea, + unsigned long access, unsigned long trap) +{ + pmd_t *pmd; + + if (Hash == 0) + return; + pmd = pmd_offset(pgd_offset(mm, ea), ea); + if (!pmd_none(*pmd)) + add_hash_page(mm->context, ea, pmd_val(*pmd)); +} + +/* * Initialize the hash table and patch the instructions in hashtable.S. */ void __init MMU_init_hw(void) diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index 0473953..60e852f 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -14,14 +14,32 @@ * 2 of the License, or (at your option) any later version. */ +#undef DEBUG + #include <linux/config.h> #include <asm/pgtable.h> #include <asm/mmu.h> #include <asm/mmu_context.h> #include <asm/paca.h> #include <asm/cputable.h> +#include <asm/cacheflush.h> + +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif -extern void slb_allocate(unsigned long ea); +extern void slb_allocate_realmode(unsigned long ea); +extern void slb_allocate_user(unsigned long ea); + +static void slb_allocate(unsigned long ea) +{ + /* Currently, we do real mode for all SLBs including user, but + * that will change if we bring back dynamic VSIDs + */ + slb_allocate_realmode(ea); +} static inline unsigned long mk_esid_data(unsigned long ea, unsigned long slot) { @@ -46,13 +64,15 @@ static void slb_flush_and_rebolt(void) { /* If you change this make sure you change SLB_NUM_BOLTED * appropriately too. */ - unsigned long ksp_flags = SLB_VSID_KERNEL; + unsigned long linear_llp, virtual_llp, lflags, vflags; unsigned long ksp_esid_data; WARN_ON(!irqs_disabled()); - if (cpu_has_feature(CPU_FTR_16M_PAGE)) - ksp_flags |= SLB_VSID_L; + linear_llp = mmu_psize_defs[mmu_linear_psize].sllp; + virtual_llp = mmu_psize_defs[mmu_virtual_psize].sllp; + lflags = SLB_VSID_KERNEL | linear_llp; + vflags = SLB_VSID_KERNEL | virtual_llp; ksp_esid_data = mk_esid_data(get_paca()->kstack, 2); if ((ksp_esid_data & ESID_MASK) == KERNELBASE) @@ -67,9 +87,9 @@ static void slb_flush_and_rebolt(void) /* Slot 2 - kernel stack */ "slbmte %2,%3\n" "isync" - :: "r"(mk_vsid_data(VMALLOCBASE, SLB_VSID_KERNEL)), + :: "r"(mk_vsid_data(VMALLOCBASE, vflags)), "r"(mk_esid_data(VMALLOCBASE, 1)), - "r"(mk_vsid_data(ksp_esid_data, ksp_flags)), + "r"(mk_vsid_data(ksp_esid_data, lflags)), "r"(ksp_esid_data) : "memory"); } @@ -102,6 +122,9 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm) get_paca()->slb_cache_ptr = 0; get_paca()->context = mm->context; +#ifdef CONFIG_PPC_64K_PAGES + get_paca()->pgdir = mm->pgd; +#endif /* CONFIG_PPC_64K_PAGES */ /* * preload some userspace segments into the SLB. @@ -131,28 +154,77 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm) slb_allocate(unmapped_base); } +static inline void patch_slb_encoding(unsigned int *insn_addr, + unsigned int immed) +{ + /* Assume the instruction had a "0" immediate value, just + * "or" in the new value + */ + *insn_addr |= immed; + flush_icache_range((unsigned long)insn_addr, 4+ + (unsigned long)insn_addr); +} + void slb_initialize(void) { + unsigned long linear_llp, virtual_llp; + static int slb_encoding_inited; + extern unsigned int *slb_miss_kernel_load_linear; + extern unsigned int *slb_miss_kernel_load_virtual; + extern unsigned int *slb_miss_user_load_normal; +#ifdef CONFIG_HUGETLB_PAGE + extern unsigned int *slb_miss_user_load_huge; + unsigned long huge_llp; + + huge_llp = mmu_psize_defs[mmu_huge_psize].sllp; +#endif + + /* Prepare our SLB miss handler based on our page size */ + linear_llp = mmu_psize_defs[mmu_linear_psize].sllp; + virtual_llp = mmu_psize_defs[mmu_virtual_psize].sllp; + if (!slb_encoding_inited) { + slb_encoding_inited = 1; + patch_slb_encoding(slb_miss_kernel_load_linear, + SLB_VSID_KERNEL | linear_llp); + patch_slb_encoding(slb_miss_kernel_load_virtual, + SLB_VSID_KERNEL | virtual_llp); + patch_slb_encoding(slb_miss_user_load_normal, + SLB_VSID_USER | virtual_llp); + + DBG("SLB: linear LLP = %04x\n", linear_llp); + DBG("SLB: virtual LLP = %04x\n", virtual_llp); +#ifdef CONFIG_HUGETLB_PAGE + patch_slb_encoding(slb_miss_user_load_huge, + SLB_VSID_USER | huge_llp); + DBG("SLB: huge LLP = %04x\n", huge_llp); +#endif + } + /* On iSeries the bolted entries have already been set up by * the hypervisor from the lparMap data in head.S */ #ifndef CONFIG_PPC_ISERIES - unsigned long flags = SLB_VSID_KERNEL; + { + unsigned long lflags, vflags; - /* Invalidate the entire SLB (even slot 0) & all the ERATS */ - if (cpu_has_feature(CPU_FTR_16M_PAGE)) - flags |= SLB_VSID_L; + lflags = SLB_VSID_KERNEL | linear_llp; + vflags = SLB_VSID_KERNEL | virtual_llp; - asm volatile("isync":::"memory"); - asm volatile("slbmte %0,%0"::"r" (0) : "memory"); + /* Invalidate the entire SLB (even slot 0) & all the ERATS */ + asm volatile("isync":::"memory"); + asm volatile("slbmte %0,%0"::"r" (0) : "memory"); asm volatile("isync; slbia; isync":::"memory"); - create_slbe(KERNELBASE, flags, 0); - create_slbe(VMALLOCBASE, SLB_VSID_KERNEL, 1); + create_slbe(KERNELBASE, lflags, 0); + + /* VMALLOC space has 4K pages always for now */ + create_slbe(VMALLOCBASE, vflags, 1); + /* We don't bolt the stack for the time being - we're in boot, * so the stack is in the bolted segment. By the time it goes * elsewhere, we'll call _switch() which will bolt in the new * one. */ asm volatile("isync":::"memory"); -#endif + } +#endif /* CONFIG_PPC_ISERIES */ get_paca()->stab_rr = SLB_NUM_BOLTED; } diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S index a3a03da..950ffc5 100644 --- a/arch/powerpc/mm/slb_low.S +++ b/arch/powerpc/mm/slb_low.S @@ -18,61 +18,28 @@ #include <linux/config.h> #include <asm/processor.h> -#include <asm/page.h> -#include <asm/mmu.h> #include <asm/ppc_asm.h> #include <asm/asm-offsets.h> #include <asm/cputable.h> +#include <asm/page.h> +#include <asm/mmu.h> +#include <asm/pgtable.h> -/* void slb_allocate(unsigned long ea); +/* void slb_allocate_realmode(unsigned long ea); * * Create an SLB entry for the given EA (user or kernel). * r3 = faulting address, r13 = PACA * r9, r10, r11 are clobbered by this function * No other registers are examined or changed. */ -_GLOBAL(slb_allocate) - /* - * First find a slot, round robin. Previously we tried to find - * a free slot first but that took too long. Unfortunately we - * dont have any LRU information to help us choose a slot. - */ -#ifdef CONFIG_PPC_ISERIES - /* - * On iSeries, the "bolted" stack segment can be cast out on - * shared processor switch so we need to check for a miss on - * it and restore it to the right slot. - */ - ld r9,PACAKSAVE(r13) - clrrdi r9,r9,28 - clrrdi r11,r3,28 - li r10,SLB_NUM_BOLTED-1 /* Stack goes in last bolted slot */ - cmpld r9,r11 - beq 3f -#endif /* CONFIG_PPC_ISERIES */ - - ld r10,PACASTABRR(r13) - addi r10,r10,1 - /* use a cpu feature mask if we ever change our slb size */ - cmpldi r10,SLB_NUM_ENTRIES - - blt+ 4f - li r10,SLB_NUM_BOLTED - -4: - std r10,PACASTABRR(r13) -3: - /* r3 = faulting address, r10 = entry */ +_GLOBAL(slb_allocate_realmode) + /* r3 = faulting address */ srdi r9,r3,60 /* get region */ - srdi r3,r3,28 /* get esid */ + srdi r10,r3,28 /* get esid */ cmpldi cr7,r9,0xc /* cmp KERNELBASE for later use */ - rldimi r10,r3,28,0 /* r10= ESID<<28 | entry */ - oris r10,r10,SLB_ESID_V@h /* r10 |= SLB_ESID_V */ - - /* r3 = esid, r10 = esid_data, cr7 = <>KERNELBASE */ - + /* r3 = address, r10 = esid, cr7 = <>KERNELBASE */ blt cr7,0f /* user or kernel? */ /* kernel address: proto-VSID = ESID */ @@ -81,43 +48,166 @@ _GLOBAL(slb_allocate) * top segment. That's ok, the scramble below will translate * it to VSID 0, which is reserved as a bad VSID - one which * will never have any pages in it. */ - li r11,SLB_VSID_KERNEL -BEGIN_FTR_SECTION - bne cr7,9f - li r11,(SLB_VSID_KERNEL|SLB_VSID_L) -END_FTR_SECTION_IFSET(CPU_FTR_16M_PAGE) - b 9f -0: /* user address: proto-VSID = context<<15 | ESID */ - srdi. r9,r3,USER_ESID_BITS + /* Check if hitting the linear mapping of the vmalloc/ioremap + * kernel space + */ + bne cr7,1f + + /* Linear mapping encoding bits, the "li" instruction below will + * be patched by the kernel at boot + */ +_GLOBAL(slb_miss_kernel_load_linear) + li r11,0 + b slb_finish_load + +1: /* vmalloc/ioremap mapping encoding bits, the "li" instruction below + * will be patched by the kernel at boot + */ +_GLOBAL(slb_miss_kernel_load_virtual) + li r11,0 + b slb_finish_load + + +0: /* user address: proto-VSID = context << 15 | ESID. First check + * if the address is within the boundaries of the user region + */ + srdi. r9,r10,USER_ESID_BITS bne- 8f /* invalid ea bits set */ + /* Figure out if the segment contains huge pages */ #ifdef CONFIG_HUGETLB_PAGE BEGIN_FTR_SECTION + b 1f +END_FTR_SECTION_IFCLR(CPU_FTR_16M_PAGE) + cmpldi r10,16 + + lhz r9,PACALOWHTLBAREAS(r13) + mr r11,r10 + blt 5f + lhz r9,PACAHIGHHTLBAREAS(r13) - srdi r11,r3,(HTLB_AREA_SHIFT-SID_SHIFT) - srd r9,r9,r11 - lhz r11,PACALOWHTLBAREAS(r13) - srd r11,r11,r3 - or r9,r9,r11 -END_FTR_SECTION_IFSET(CPU_FTR_16M_PAGE) + srdi r11,r10,(HTLB_AREA_SHIFT-SID_SHIFT) + +5: srd r9,r9,r11 + andi. r9,r9,1 + beq 1f +_GLOBAL(slb_miss_user_load_huge) + li r11,0 + b 2f +1: #endif /* CONFIG_HUGETLB_PAGE */ - li r11,SLB_VSID_USER +_GLOBAL(slb_miss_user_load_normal) + li r11,0 -#ifdef CONFIG_HUGETLB_PAGE -BEGIN_FTR_SECTION - rldimi r11,r9,8,55 /* shift masked bit into SLB_VSID_L */ -END_FTR_SECTION_IFSET(CPU_FTR_16M_PAGE) -#endif /* CONFIG_HUGETLB_PAGE */ +2: + ld r9,PACACONTEXTID(r13) + rldimi r10,r9,USER_ESID_BITS,0 + b slb_finish_load +8: /* invalid EA */ + li r10,0 /* BAD_VSID */ + li r11,SLB_VSID_USER /* flags don't much matter */ + b slb_finish_load + +#ifdef __DISABLED__ + +/* void slb_allocate_user(unsigned long ea); + * + * Create an SLB entry for the given EA (user or kernel). + * r3 = faulting address, r13 = PACA + * r9, r10, r11 are clobbered by this function + * No other registers are examined or changed. + * + * It is called with translation enabled in order to be able to walk the + * page tables. This is not currently used. + */ +_GLOBAL(slb_allocate_user) + /* r3 = faulting address */ + srdi r10,r3,28 /* get esid */ + + crset 4*cr7+lt /* set "user" flag for later */ + + /* check if we fit in the range covered by the pagetables*/ + srdi. r9,r3,PGTABLE_EADDR_SIZE + crnot 4*cr0+eq,4*cr0+eq + beqlr + + /* now we need to get to the page tables in order to get the page + * size encoding from the PMD. In the future, we'll be able to deal + * with 1T segments too by getting the encoding from the PGD instead + */ + ld r9,PACAPGDIR(r13) + cmpldi cr0,r9,0 + beqlr + rlwinm r11,r10,8,25,28 + ldx r9,r9,r11 /* get pgd_t */ + cmpldi cr0,r9,0 + beqlr + rlwinm r11,r10,3,17,28 + ldx r9,r9,r11 /* get pmd_t */ + cmpldi cr0,r9,0 + beqlr + + /* build vsid flags */ + andi. r11,r9,SLB_VSID_LLP + ori r11,r11,SLB_VSID_USER + + /* get context to calculate proto-VSID */ ld r9,PACACONTEXTID(r13) - rldimi r3,r9,USER_ESID_BITS,0 + rldimi r10,r9,USER_ESID_BITS,0 + + /* fall through slb_finish_load */ + +#endif /* __DISABLED__ */ + + +/* + * Finish loading of an SLB entry and return + * + * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9, cr7 = <>KERNELBASE + */ +slb_finish_load: + ASM_VSID_SCRAMBLE(r10,r9) + rldimi r11,r10,SLB_VSID_SHIFT,16 /* combine VSID and flags */ + + /* r3 = EA, r11 = VSID data */ + /* + * Find a slot, round robin. Previously we tried to find a + * free slot first but that took too long. Unfortunately we + * dont have any LRU information to help us choose a slot. + */ +#ifdef CONFIG_PPC_ISERIES + /* + * On iSeries, the "bolted" stack segment can be cast out on + * shared processor switch so we need to check for a miss on + * it and restore it to the right slot. + */ + ld r9,PACAKSAVE(r13) + clrrdi r9,r9,28 + clrrdi r3,r3,28 + li r10,SLB_NUM_BOLTED-1 /* Stack goes in last bolted slot */ + cmpld r9,r3 + beq 3f +#endif /* CONFIG_PPC_ISERIES */ + + ld r10,PACASTABRR(r13) + addi r10,r10,1 + /* use a cpu feature mask if we ever change our slb size */ + cmpldi r10,SLB_NUM_ENTRIES + + blt+ 4f + li r10,SLB_NUM_BOLTED -9: /* r3 = protovsid, r11 = flags, r10 = esid_data, cr7 = <>KERNELBASE */ - ASM_VSID_SCRAMBLE(r3,r9) +4: + std r10,PACASTABRR(r13) + +3: + rldimi r3,r10,0,36 /* r3= EA[0:35] | entry */ + oris r10,r3,SLB_ESID_V@h /* r3 |= SLB_ESID_V */ - rldimi r11,r3,SLB_VSID_SHIFT,16 /* combine VSID and flags */ + /* r3 = ESID data, r11 = VSID data */ /* * No need for an isync before or after this slbmte. The exception @@ -125,7 +215,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_16M_PAGE) */ slbmte r11,r10 - bgelr cr7 /* we're done for kernel addresses */ + /* we're done for kernel addresses */ + crclr 4*cr0+eq /* set result to "success" */ + bgelr cr7 /* Update the slb cache */ lhz r3,PACASLBCACHEPTR(r13) /* offset = paca->slb_cache_ptr */ @@ -143,9 +235,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_16M_PAGE) li r3,SLB_CACHE_ENTRIES+1 2: sth r3,PACASLBCACHEPTR(r13) /* paca->slb_cache_ptr = offset */ + crclr 4*cr0+eq /* set result to "success" */ blr -8: /* invalid EA */ - li r3,0 /* BAD_VSID */ - li r11,SLB_VSID_USER /* flags don't much matter */ - b 9b diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c index 1b83f00..cfbb4e1 100644 --- a/arch/powerpc/mm/stab.c +++ b/arch/powerpc/mm/stab.c @@ -20,13 +20,13 @@ #include <asm/cputable.h> #include <asm/lmb.h> #include <asm/abs_addr.h> +#include <asm/firmware.h> struct stab_entry { unsigned long esid_data; unsigned long vsid_data; }; -/* Both the segment table and SLB code uses the following cache */ #define NR_STAB_CACHE_ENTRIES 8 DEFINE_PER_CPU(long, stab_cache_ptr); DEFINE_PER_CPU(long, stab_cache[NR_STAB_CACHE_ENTRIES]); @@ -186,7 +186,7 @@ void switch_stab(struct task_struct *tsk, struct mm_struct *mm) /* Never flush the first entry. */ ste += 1; for (entry = 1; - entry < (PAGE_SIZE / sizeof(struct stab_entry)); + entry < (HW_PAGE_SIZE / sizeof(struct stab_entry)); entry++, ste++) { unsigned long ea; ea = ste->esid_data & ESID_MASK; @@ -200,6 +200,10 @@ void switch_stab(struct task_struct *tsk, struct mm_struct *mm) __get_cpu_var(stab_cache_ptr) = 0; +#ifdef CONFIG_PPC_64K_PAGES + get_paca()->pgdir = mm->pgd; +#endif /* CONFIG_PPC_64K_PAGES */ + /* Now preload some entries for the new task */ if (test_tsk_thread_flag(tsk, TIF_32BIT)) unmapped_base = TASK_UNMAPPED_BASE_USER32; @@ -223,8 +227,6 @@ void switch_stab(struct task_struct *tsk, struct mm_struct *mm) asm volatile("sync" : : : "memory"); } -extern void slb_initialize(void); - /* * Allocate segment tables for secondary CPUs. These must all go in * the first (bolted) segment, so that do_stab_bolted won't get a @@ -243,18 +245,21 @@ void stabs_alloc(void) if (cpu == 0) continue; /* stab for CPU 0 is statically allocated */ - newstab = lmb_alloc_base(PAGE_SIZE, PAGE_SIZE, 1<<SID_SHIFT); + newstab = lmb_alloc_base(HW_PAGE_SIZE, HW_PAGE_SIZE, + 1<<SID_SHIFT); if (! newstab) panic("Unable to allocate segment table for CPU %d.\n", cpu); newstab += KERNELBASE; - memset((void *)newstab, 0, PAGE_SIZE); + memset((void *)newstab, 0, HW_PAGE_SIZE); paca[cpu].stab_addr = newstab; paca[cpu].stab_real = virt_to_abs(newstab); - printk(KERN_DEBUG "Segment table for CPU %d at 0x%lx virtual, 0x%lx absolute\n", cpu, paca[cpu].stab_addr, paca[cpu].stab_real); + printk(KERN_INFO "Segment table for CPU %d at 0x%lx " + "virtual, 0x%lx absolute\n", + cpu, paca[cpu].stab_addr, paca[cpu].stab_real); } } @@ -266,14 +271,28 @@ void stabs_alloc(void) void stab_initialize(unsigned long stab) { unsigned long vsid = get_kernel_vsid(KERNELBASE); + unsigned long stabreal; - if (cpu_has_feature(CPU_FTR_SLB)) { - slb_initialize(); - } else { - asm volatile("isync; slbia; isync":::"memory"); - make_ste(stab, GET_ESID(KERNELBASE), vsid); + asm volatile("isync; slbia; isync":::"memory"); + make_ste(stab, GET_ESID(KERNELBASE), vsid); - /* Order update */ - asm volatile("sync":::"memory"); + /* Order update */ + asm volatile("sync":::"memory"); + + /* Set ASR */ + stabreal = get_paca()->stab_real | 0x1ul; + +#ifdef CONFIG_PPC_ISERIES + if (firmware_has_feature(FW_FEATURE_ISERIES)) { + HvCall1(HvCallBaseSetASR, stabreal); + return; + } +#endif /* CONFIG_PPC_ISERIES */ +#ifdef CONFIG_PPC_PSERIES + if (platform_is_lpar()) { + plpar_hcall_norets(H_SET_ASR, stabreal); + return; } +#endif + mtspr(SPRN_ASR, stabreal); } diff --git a/arch/powerpc/mm/tlb_64.c b/arch/powerpc/mm/tlb_64.c index 09ab81a..53e31b8 100644 --- a/arch/powerpc/mm/tlb_64.c +++ b/arch/powerpc/mm/tlb_64.c @@ -21,6 +21,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ + #include <linux/config.h> #include <linux/kernel.h> #include <linux/mm.h> @@ -30,7 +31,7 @@ #include <asm/pgalloc.h> #include <asm/tlbflush.h> #include <asm/tlb.h> -#include <linux/highmem.h> +#include <asm/bug.h> DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch); @@ -126,28 +127,46 @@ void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf) * (if we remove it we should clear the _PTE_HPTEFLAGS bits). */ void hpte_update(struct mm_struct *mm, unsigned long addr, - unsigned long pte, int wrprot) + pte_t *ptep, unsigned long pte, int huge) { struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch); unsigned long vsid; + unsigned int psize = mmu_virtual_psize; int i; i = batch->index; + /* We mask the address for the base page size. Huge pages will + * have applied their own masking already + */ + addr &= PAGE_MASK; + + /* Get page size (maybe move back to caller) */ + if (huge) { +#ifdef CONFIG_HUGETLB_PAGE + psize = mmu_huge_psize; +#else + BUG(); +#endif + } + /* * This can happen when we are in the middle of a TLB batch and * we encounter memory pressure (eg copy_page_range when it tries * to allocate a new pte). If we have to reclaim memory and end * up scanning and resetting referenced bits then our batch context * will change mid stream. + * + * We also need to ensure only one page size is present in a given + * batch */ - if (i != 0 && (mm != batch->mm || batch->large != pte_huge(pte))) { + if (i != 0 && (mm != batch->mm || batch->psize != psize)) { flush_tlb_pending(); i = 0; } if (i == 0) { batch->mm = mm; - batch->large = pte_huge(pte); + batch->psize = psize; } if (addr < KERNELBASE) { vsid = get_vsid(mm->context.id, addr); @@ -155,7 +174,7 @@ void hpte_update(struct mm_struct *mm, unsigned long addr, } else vsid = get_kernel_vsid(addr); batch->vaddr[i] = (vsid << 28 ) | (addr & 0x0fffffff); - batch->pte[i] = __pte(pte); + batch->pte[i] = __real_pte(__pte(pte), ptep); batch->index = ++i; if (i >= PPC64_TLB_BATCH_NR) flush_tlb_pending(); @@ -177,7 +196,8 @@ void __flush_tlb_pending(struct ppc64_tlb_batch *batch) local = 1; if (i == 1) - flush_hash_page(batch->vaddr[0], batch->pte[0], local); + flush_hash_page(batch->vaddr[0], batch->pte[0], + batch->psize, local); else flush_hash_range(i, local); batch->index = 0; diff --git a/arch/powerpc/oprofile/Kconfig b/arch/powerpc/oprofile/Kconfig index 19d3773..eb2dece 100644 --- a/arch/powerpc/oprofile/Kconfig +++ b/arch/powerpc/oprofile/Kconfig @@ -1,7 +1,3 @@ - -menu "Profiling support" - depends on EXPERIMENTAL - config PROFILING bool "Profiling support (EXPERIMENTAL)" help @@ -19,5 +15,3 @@ config OPROFILE If unsure, say N. -endmenu - diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c index 8864493..e3a024e 100644 --- a/arch/powerpc/oprofile/op_model_power4.c +++ b/arch/powerpc/oprofile/op_model_power4.c @@ -17,6 +17,7 @@ #include <asm/systemcfg.h> #include <asm/rtas.h> #include <asm/oprofile_impl.h> +#include <asm/reg.h> #define dbg(args...) @@ -81,6 +82,26 @@ static void power4_reg_setup(struct op_counter_config *ctr, extern void ppc64_enable_pmcs(void); +/* + * Older CPUs require the MMCRA sample bit to be always set, but newer + * CPUs only want it set for some groups. Eventually we will remove all + * knowledge of this bit in the kernel, oprofile userspace should be + * setting it when required. + * + * In order to keep current installations working we force the bit for + * those older CPUs. Once everyone has updated their oprofile userspace we + * can remove this hack. + */ +static inline int mmcra_must_set_sample(void) +{ + if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p) || + __is_processor(PV_970) || __is_processor(PV_970FX) || + __is_processor(PV_970MP)) + return 1; + + return 0; +} + static void power4_cpu_setup(void *unused) { unsigned int mmcr0 = mmcr0_val; @@ -98,7 +119,8 @@ static void power4_cpu_setup(void *unused) mtspr(SPRN_MMCR1, mmcr1_val); - mmcra |= MMCRA_SAMPLE_ENABLE; + if (mmcra_must_set_sample()) + mmcra |= MMCRA_SAMPLE_ENABLE; mtspr(SPRN_MMCRA, mmcra); dbg("setup on cpu %d, mmcr0 %lx\n", smp_processor_id(), @@ -211,8 +233,7 @@ static unsigned long get_pc(struct pt_regs *regs) mmcra = mfspr(SPRN_MMCRA); /* Were we in the hypervisor? */ - if ((systemcfg->platform == PLATFORM_PSERIES_LPAR) && - (mmcra & MMCRA_SIHV)) + if (platform_is_lpar() && (mmcra & MMCRA_SIHV)) /* function descriptor madness */ return *((unsigned long *)hypervisor_bucket); diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 172c0db..8836b3a 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_85xx) += 85xx/ obj-$(CONFIG_PPC_PSERIES) += pseries/ obj-$(CONFIG_PPC_ISERIES) += iseries/ obj-$(CONFIG_PPC_MAPLE) += maple/ +obj-$(CONFIG_PPC_CELL) += cell/ diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile new file mode 100644 index 0000000..55e094b --- /dev/null +++ b/arch/powerpc/platforms/cell/Makefile @@ -0,0 +1,2 @@ +obj-y += interrupt.o iommu.o setup.o spider-pic.o +obj-$(CONFIG_SMP) += smp.o diff --git a/arch/ppc64/kernel/bpa_iic.c b/arch/powerpc/platforms/cell/interrupt.c index 0aaa878..7fbe78a 100644 --- a/arch/ppc64/kernel/bpa_iic.c +++ b/arch/powerpc/platforms/cell/interrupt.c @@ -1,5 +1,5 @@ /* - * BPA Internal Interrupt Controller + * Cell Internal Interrupt Controller * * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 * @@ -31,7 +31,7 @@ #include <asm/prom.h> #include <asm/ptrace.h> -#include "bpa_iic.h" +#include "interrupt.h" struct iic_pending_bits { u32 data; @@ -89,7 +89,7 @@ static void iic_end(unsigned int irq) } static struct hw_interrupt_type iic_pic = { - .typename = " BPA-IIC ", + .typename = " CELL-IIC ", .startup = iic_startup, .enable = iic_enable, .disable = iic_disable, @@ -106,7 +106,7 @@ static int iic_external_get_irq(struct iic_pending_bits pending) irq = -1; /* - * This mapping is specific to the Broadband + * This mapping is specific to the Cell Broadband * Engine. We might need to get the numbers * from the device tree to support future CPUs. */ diff --git a/arch/ppc64/kernel/bpa_iic.h b/arch/powerpc/platforms/cell/interrupt.h index 6833c30..37d58e6 100644 --- a/arch/ppc64/kernel/bpa_iic.h +++ b/arch/powerpc/platforms/cell/interrupt.h @@ -1,5 +1,5 @@ -#ifndef ASM_BPA_IIC_H -#define ASM_BPA_IIC_H +#ifndef ASM_CELL_PIC_H +#define ASM_CELL_PIC_H #ifdef __KERNEL__ /* * Mapping of IIC pending bits into per-node @@ -21,7 +21,7 @@ * + node number * * don't care * - * A node consists of a Broadband Engine and an optional + * A node consists of a Cell Broadband Engine and an optional * south bridge device providing a maximum of 64 IRQs. * The south bridge may be connected to either IOIF0 * or IOIF1. @@ -59,4 +59,4 @@ extern void spider_init_IRQ(void); extern int spider_get_irq(unsigned long int_pending); #endif -#endif /* ASM_BPA_IIC_H */ +#endif /* ASM_CELL_PIC_H */ diff --git a/arch/ppc64/kernel/bpa_iommu.c b/arch/powerpc/platforms/cell/iommu.c index da1b4b7..74f999b 100644 --- a/arch/ppc64/kernel/bpa_iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -1,5 +1,5 @@ /* - * IOMMU implementation for Broadband Processor Architecture + * IOMMU implementation for Cell Broadband Processor Architecture * We just establish a linear mapping at boot by setting all the * IOPT cache entries in the CPU. * The mapping functions should be identical to pci_direct_iommu, @@ -41,7 +41,7 @@ #include <asm/system.h> #include <asm/ppc-pci.h> -#include "bpa_iommu.h" +#include "iommu.h" static inline unsigned long get_iopt_entry(unsigned long real_address, unsigned long ioid, @@ -276,7 +276,7 @@ static void iommu_dev_setup_null(struct pci_dev *d) { } * for each DMA window used by any device. For now, we * happen to know that there is only one DMA window in use, * starting at iopt_phys_offset. */ -static void bpa_map_iommu(void) +static void cell_map_iommu(void) { unsigned long address; void __iomem *base; @@ -309,7 +309,7 @@ static void bpa_map_iommu(void) } -static void *bpa_alloc_coherent(struct device *hwdev, size_t size, +static void *cell_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t flag) { void *ret; @@ -317,65 +317,65 @@ static void *bpa_alloc_coherent(struct device *hwdev, size_t size, ret = (void *)__get_free_pages(flag, get_order(size)); if (ret != NULL) { memset(ret, 0, size); - *dma_handle = virt_to_abs(ret) | BPA_DMA_VALID; + *dma_handle = virt_to_abs(ret) | CELL_DMA_VALID; } return ret; } -static void bpa_free_coherent(struct device *hwdev, size_t size, +static void cell_free_coherent(struct device *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle) { free_pages((unsigned long)vaddr, get_order(size)); } -static dma_addr_t bpa_map_single(struct device *hwdev, void *ptr, +static dma_addr_t cell_map_single(struct device *hwdev, void *ptr, size_t size, enum dma_data_direction direction) { - return virt_to_abs(ptr) | BPA_DMA_VALID; + return virt_to_abs(ptr) | CELL_DMA_VALID; } -static void bpa_unmap_single(struct device *hwdev, dma_addr_t dma_addr, +static void cell_unmap_single(struct device *hwdev, dma_addr_t dma_addr, size_t size, enum dma_data_direction direction) { } -static int bpa_map_sg(struct device *hwdev, struct scatterlist *sg, +static int cell_map_sg(struct device *hwdev, struct scatterlist *sg, int nents, enum dma_data_direction direction) { int i; for (i = 0; i < nents; i++, sg++) { sg->dma_address = (page_to_phys(sg->page) + sg->offset) - | BPA_DMA_VALID; + | CELL_DMA_VALID; sg->dma_length = sg->length; } return nents; } -static void bpa_unmap_sg(struct device *hwdev, struct scatterlist *sg, +static void cell_unmap_sg(struct device *hwdev, struct scatterlist *sg, int nents, enum dma_data_direction direction) { } -static int bpa_dma_supported(struct device *dev, u64 mask) +static int cell_dma_supported(struct device *dev, u64 mask) { return mask < 0x100000000ull; } -void bpa_init_iommu(void) +void cell_init_iommu(void) { - bpa_map_iommu(); + cell_map_iommu(); /* Direct I/O, IOMMU off */ ppc_md.iommu_dev_setup = iommu_dev_setup_null; ppc_md.iommu_bus_setup = iommu_bus_setup_null; - pci_dma_ops.alloc_coherent = bpa_alloc_coherent; - pci_dma_ops.free_coherent = bpa_free_coherent; - pci_dma_ops.map_single = bpa_map_single; - pci_dma_ops.unmap_single = bpa_unmap_single; - pci_dma_ops.map_sg = bpa_map_sg; - pci_dma_ops.unmap_sg = bpa_unmap_sg; - pci_dma_ops.dma_supported = bpa_dma_supported; + pci_dma_ops.alloc_coherent = cell_alloc_coherent; + pci_dma_ops.free_coherent = cell_free_coherent; + pci_dma_ops.map_single = cell_map_single; + pci_dma_ops.unmap_single = cell_unmap_single; + pci_dma_ops.map_sg = cell_map_sg; + pci_dma_ops.unmap_sg = cell_unmap_sg; + pci_dma_ops.dma_supported = cell_dma_supported; } diff --git a/arch/ppc64/kernel/bpa_iommu.h b/arch/powerpc/platforms/cell/iommu.h index e547d77..490d77a 100644 --- a/arch/ppc64/kernel/bpa_iommu.h +++ b/arch/powerpc/platforms/cell/iommu.h @@ -1,5 +1,5 @@ -#ifndef BPA_IOMMU_H -#define BPA_IOMMU_H +#ifndef CELL_IOMMU_H +#define CELL_IOMMU_H /* some constants */ enum { @@ -55,11 +55,11 @@ enum { /* The high bit needs to be set on every DMA address, only 2GB are addressable */ - BPA_DMA_VALID = 0x80000000, - BPA_DMA_MASK = 0x7fffffff, + CELL_DMA_VALID = 0x80000000, + CELL_DMA_MASK = 0x7fffffff, }; -void bpa_init_iommu(void); +void cell_init_iommu(void); #endif diff --git a/arch/ppc64/kernel/bpa_setup.c b/arch/powerpc/platforms/cell/setup.c index c2dc8f2..9a49563 100644 --- a/arch/ppc64/kernel/bpa_setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -1,11 +1,11 @@ /* - * linux/arch/ppc/kernel/bpa_setup.c + * linux/arch/powerpc/platforms/cell/cell_setup.c * * Copyright (C) 1995 Linus Torvalds * Adapted from 'alpha' version by Gary Thomas * Modified by Cort Dougan (cort@cs.nmt.edu) * Modified by PPC64 Team, IBM Corp - * Modified by BPA Team, IBM Deutschland Entwicklung GmbH + * Modified by Cell Team, IBM Deutschland Entwicklung GmbH * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -46,8 +46,8 @@ #include <asm/ppc-pci.h> #include <asm/irq.h> -#include "bpa_iic.h" -#include "bpa_iommu.h" +#include "interrupt.h" +#include "iommu.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -55,7 +55,7 @@ #define DBG(fmt...) #endif -void bpa_show_cpuinfo(struct seq_file *m) +void cell_show_cpuinfo(struct seq_file *m) { struct device_node *root; const char *model = ""; @@ -63,22 +63,22 @@ void bpa_show_cpuinfo(struct seq_file *m) root = of_find_node_by_path("/"); if (root) model = get_property(root, "model", NULL); - seq_printf(m, "machine\t\t: BPA %s\n", model); + seq_printf(m, "machine\t\t: CHRP %s\n", model); of_node_put(root); } -static void bpa_progress(char *s, unsigned short hex) +static void cell_progress(char *s, unsigned short hex) { printk("*** %04x : %s\n", hex, s ? s : ""); } -static void __init bpa_setup_arch(void) +static void __init cell_setup_arch(void) { ppc_md.init_IRQ = iic_init_IRQ; ppc_md.get_irq = iic_get_irq; #ifdef CONFIG_SMP - smp_init_pSeries(); + smp_init_cell(); #endif /* init to some ~sane value until calibrate_delay() runs */ @@ -97,39 +97,39 @@ static void __init bpa_setup_arch(void) conswitchp = &dummy_con; #endif - bpa_nvram_init(); + mmio_nvram_init(); } /* * Early initialization. Relocation is on but do not reference unbolted pages */ -static void __init bpa_init_early(void) +static void __init cell_init_early(void) { - DBG(" -> bpa_init_early()\n"); + DBG(" -> cell_init_early()\n"); hpte_init_native(); - bpa_init_iommu(); + cell_init_iommu(); - ppc64_interrupt_controller = IC_BPA_IIC; + ppc64_interrupt_controller = IC_CELL_PIC; - DBG(" <- bpa_init_early()\n"); + DBG(" <- cell_init_early()\n"); } -static int __init bpa_probe(int platform) +static int __init cell_probe(int platform) { - if (platform != PLATFORM_BPA) + if (platform != PLATFORM_CELL) return 0; return 1; } -struct machdep_calls __initdata bpa_md = { - .probe = bpa_probe, - .setup_arch = bpa_setup_arch, - .init_early = bpa_init_early, - .show_cpuinfo = bpa_show_cpuinfo, +struct machdep_calls __initdata cell_md = { + .probe = cell_probe, + .setup_arch = cell_setup_arch, + .init_early = cell_init_early, + .show_cpuinfo = cell_show_cpuinfo, .restart = rtas_restart, .power_off = rtas_power_off, .halt = rtas_halt, @@ -137,5 +137,5 @@ struct machdep_calls __initdata bpa_md = { .get_rtc_time = rtas_get_rtc_time, .set_rtc_time = rtas_set_rtc_time, .calibrate_decr = generic_calibrate_decr, - .progress = bpa_progress, + .progress = cell_progress, }; diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c new file mode 100644 index 0000000..de96ead --- /dev/null +++ b/arch/powerpc/platforms/cell/smp.c @@ -0,0 +1,230 @@ +/* + * SMP support for BPA machines. + * + * Dave Engebretsen, Peter Bergner, and + * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com + * + * Plus various changes from other IBM teams... + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#undef DEBUG + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/smp.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/cache.h> +#include <linux/err.h> +#include <linux/sysdev.h> +#include <linux/cpu.h> + +#include <asm/ptrace.h> +#include <asm/atomic.h> +#include <asm/irq.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/smp.h> +#include <asm/paca.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/cputable.h> +#include <asm/firmware.h> +#include <asm/system.h> +#include <asm/rtas.h> + +#include "interrupt.h" + +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +/* + * The primary thread of each non-boot processor is recorded here before + * smp init. + */ +static cpumask_t of_spin_map; + +extern void pSeries_secondary_smp_init(unsigned long); + +/** + * smp_startup_cpu() - start the given cpu + * + * At boot time, there is nothing to do for primary threads which were + * started from Open Firmware. For anything else, call RTAS with the + * appropriate start location. + * + * Returns: + * 0 - failure + * 1 - success + */ +static inline int __devinit smp_startup_cpu(unsigned int lcpu) +{ + int status; + unsigned long start_here = __pa((u32)*((unsigned long *) + pSeries_secondary_smp_init)); + unsigned int pcpu; + int start_cpu; + + if (cpu_isset(lcpu, of_spin_map)) + /* Already started by OF and sitting in spin loop */ + return 1; + + pcpu = get_hard_smp_processor_id(lcpu); + + /* Fixup atomic count: it exited inside IRQ handler. */ + paca[lcpu].__current->thread_info->preempt_count = 0; + + /* + * If the RTAS start-cpu token does not exist then presume the + * cpu is already spinning. + */ + start_cpu = rtas_token("start-cpu"); + if (start_cpu == RTAS_UNKNOWN_SERVICE) + return 1; + + status = rtas_call(start_cpu, 3, 1, NULL, pcpu, start_here, lcpu); + if (status != 0) { + printk(KERN_ERR "start-cpu failed: %i\n", status); + return 0; + } + + return 1; +} + +static void smp_iic_message_pass(int target, int msg) +{ + unsigned int i; + + if (target < NR_CPUS) { + iic_cause_IPI(target, msg); + } else { + for_each_online_cpu(i) { + if (target == MSG_ALL_BUT_SELF + && i == smp_processor_id()) + continue; + iic_cause_IPI(i, msg); + } + } +} + +static int __init smp_iic_probe(void) +{ + iic_request_IPIs(); + + return cpus_weight(cpu_possible_map); +} + +static void __devinit smp_iic_setup_cpu(int cpu) +{ + if (cpu != boot_cpuid) + iic_setup_cpu(); +} + +static DEFINE_SPINLOCK(timebase_lock); +static unsigned long timebase = 0; + +static void __devinit cell_give_timebase(void) +{ + spin_lock(&timebase_lock); + rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL); + timebase = get_tb(); + spin_unlock(&timebase_lock); + + while (timebase) + barrier(); + rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL); +} + +static void __devinit cell_take_timebase(void) +{ + while (!timebase) + barrier(); + spin_lock(&timebase_lock); + set_tb(timebase >> 32, timebase & 0xffffffff); + timebase = 0; + spin_unlock(&timebase_lock); +} + +static void __devinit smp_cell_kick_cpu(int nr) +{ + BUG_ON(nr < 0 || nr >= NR_CPUS); + + if (!smp_startup_cpu(nr)) + return; + + /* + * The processor is currently spinning, waiting for the + * cpu_start field to become non-zero After we set cpu_start, + * the processor will continue on to secondary_start + */ + paca[nr].cpu_start = 1; +} + +static int smp_cell_cpu_bootable(unsigned int nr) +{ + /* Special case - we inhibit secondary thread startup + * during boot if the user requests it. Odd-numbered + * cpus are assumed to be secondary threads. + */ + if (system_state < SYSTEM_RUNNING && + cpu_has_feature(CPU_FTR_SMT) && + !smt_enabled_at_boot && nr % 2 != 0) + return 0; + + return 1; +} +static struct smp_ops_t bpa_iic_smp_ops = { + .message_pass = smp_iic_message_pass, + .probe = smp_iic_probe, + .kick_cpu = smp_cell_kick_cpu, + .setup_cpu = smp_iic_setup_cpu, + .cpu_bootable = smp_cell_cpu_bootable, +}; + +/* This is called very early */ +void __init smp_init_cell(void) +{ + int i; + + DBG(" -> smp_init_cell()\n"); + + smp_ops = &bpa_iic_smp_ops; + + /* Mark threads which are still spinning in hold loops. */ + if (cpu_has_feature(CPU_FTR_SMT)) { + for_each_present_cpu(i) { + if (i % 2 == 0) + /* + * Even-numbered logical cpus correspond to + * primary threads. + */ + cpu_set(i, of_spin_map); + } + } else { + of_spin_map = cpu_present_map; + } + + cpu_clear(boot_cpuid, of_spin_map); + + /* Non-lpar has additional take/give timebase */ + if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) { + smp_ops->give_timebase = cell_give_timebase; + smp_ops->take_timebase = cell_take_timebase; + } + + DBG(" <- smp_init_cell()\n"); +} diff --git a/arch/ppc64/kernel/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c index d5c9a02..e741321 100644 --- a/arch/ppc64/kernel/spider-pic.c +++ b/arch/powerpc/platforms/cell/spider-pic.c @@ -27,7 +27,7 @@ #include <asm/prom.h> #include <asm/io.h> -#include "bpa_iic.h" +#include "interrupt.h" /* register layout taken from Spider spec, table 7.4-4 */ enum { diff --git a/arch/powerpc/platforms/chrp/nvram.c b/arch/powerpc/platforms/chrp/nvram.c index 4ac7125..150f67d 100644 --- a/arch/powerpc/platforms/chrp/nvram.c +++ b/arch/powerpc/platforms/chrp/nvram.c @@ -17,6 +17,7 @@ #include <asm/uaccess.h> #include <asm/prom.h> #include <asm/machdep.h> +#include <asm/rtas.h> #include "chrp.h" static unsigned int nvram_size; @@ -25,7 +26,8 @@ static DEFINE_SPINLOCK(nvram_lock); static unsigned char chrp_nvram_read(int addr) { - unsigned long done, flags; + unsigned int done; + unsigned long flags; unsigned char ret; if (addr >= nvram_size) { @@ -34,7 +36,8 @@ static unsigned char chrp_nvram_read(int addr) return 0xff; } spin_lock_irqsave(&nvram_lock, flags); - if ((call_rtas("nvram-fetch", 3, 2, &done, addr, __pa(nvram_buf), 1) != 0) || 1 != done) + if ((rtas_call(rtas_token("nvram-fetch"), 3, 2, &done, addr, + __pa(nvram_buf), 1) != 0) || 1 != done) ret = 0xff; else ret = nvram_buf[0]; @@ -45,7 +48,8 @@ static unsigned char chrp_nvram_read(int addr) static void chrp_nvram_write(int addr, unsigned char val) { - unsigned long done, flags; + unsigned int done; + unsigned long flags; if (addr >= nvram_size) { printk(KERN_DEBUG "%s: write addr %d > nvram_size %u\n", @@ -54,7 +58,8 @@ static void chrp_nvram_write(int addr, unsigned char val) } spin_lock_irqsave(&nvram_lock, flags); nvram_buf[0] = val; - if ((call_rtas("nvram-store", 3, 2, &done, addr, __pa(nvram_buf), 1) != 0) || 1 != done) + if ((rtas_call(rtas_token("nvram-store"), 3, 2, &done, addr, + __pa(nvram_buf), 1) != 0) || 1 != done) printk(KERN_DEBUG "rtas IO error storing 0x%02x at %d", val, addr); spin_unlock_irqrestore(&nvram_lock, flags); } diff --git a/arch/powerpc/platforms/chrp/pegasos_eth.c b/arch/powerpc/platforms/chrp/pegasos_eth.c index a905230..29c8678 100644 --- a/arch/powerpc/platforms/chrp/pegasos_eth.c +++ b/arch/powerpc/platforms/chrp/pegasos_eth.c @@ -14,6 +14,7 @@ #include <linux/init.h> #include <linux/ioport.h> #include <linux/device.h> +#include <linux/platform_device.h> #include <linux/mv643xx.h> #include <linux/pci.h> diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index ecd32d5..4099dda 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -361,7 +361,9 @@ static void __init chrp_find_openpic(void) printk(KERN_INFO "OpenPIC at %lx\n", opaddr); irq_count = NR_IRQS - NUM_ISA_INTERRUPTS - 4; /* leave room for IPIs */ - prom_get_irq_senses(init_senses, NUM_8259_INTERRUPTS, NR_IRQS - 4); + prom_get_irq_senses(init_senses, NUM_ISA_INTERRUPTS, NR_IRQS - 4); + /* i8259 cascade is always positive level */ + init_senses[0] = IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE; iranges = (unsigned int *) get_property(np, "interrupt-ranges", &len); if (iranges == NULL) diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c index 31ee49c..bb23159 100644 --- a/arch/powerpc/platforms/chrp/smp.c +++ b/arch/powerpc/platforms/chrp/smp.c @@ -35,43 +35,6 @@ #include <asm/smp.h> #include <asm/mpic.h> -extern unsigned long smp_chrp_cpu_nr; - -static int __init smp_chrp_probe(void) -{ - struct device_node *cpus = NULL; - unsigned int *reg; - int reglen; - int ncpus = 0; - int cpuid; - unsigned int phys; - - /* Count CPUs in the device-tree */ - cpuid = 1; /* the boot cpu is logical cpu 0 */ - while ((cpus = of_find_node_by_type(cpus, "cpu")) != NULL) { - phys = ncpus; - reg = (unsigned int *) get_property(cpus, "reg", ®len); - if (reg && reglen >= sizeof(unsigned int)) - /* hmmm, not having a reg property would be bad */ - phys = *reg; - if (phys != boot_cpuid_phys) { - set_hard_smp_processor_id(cpuid, phys); - ++cpuid; - } - ++ncpus; - } - - printk(KERN_INFO "CHRP SMP probe found %d cpus\n", ncpus); - - /* Nothing more to do if less than 2 of them */ - if (ncpus <= 1) - return 1; - - mpic_request_ipis(); - - return ncpus; -} - static void __devinit smp_chrp_kick_cpu(int nr) { *(unsigned long *)KERNELBASE = nr; @@ -114,7 +77,7 @@ void __devinit smp_chrp_take_timebase(void) /* CHRP with openpic */ struct smp_ops_t chrp_smp_ops = { .message_pass = smp_mpic_message_pass, - .probe = smp_chrp_probe, + .probe = smp_mpic_probe, .kick_cpu = smp_chrp_kick_cpu, .setup_cpu = smp_chrp_setup_cpu, .give_timebase = smp_chrp_give_timebase, diff --git a/arch/powerpc/platforms/iseries/call_hpt.h b/arch/powerpc/platforms/iseries/call_hpt.h index 321f3bb..a843b0f 100644 --- a/arch/powerpc/platforms/iseries/call_hpt.h +++ b/arch/powerpc/platforms/iseries/call_hpt.h @@ -23,8 +23,8 @@ * drive the hypervisor from the OS. */ -#include <asm/iSeries/HvCallSc.h> -#include <asm/iSeries/HvTypes.h> +#include <asm/iseries/hv_call_sc.h> +#include <asm/iseries/hv_types.h> #include <asm/mmu.h> #define HvCallHptGetHptAddress HvCallHpt + 0 diff --git a/arch/powerpc/platforms/iseries/call_pci.h b/arch/powerpc/platforms/iseries/call_pci.h index a86e065..59d4e0a 100644 --- a/arch/powerpc/platforms/iseries/call_pci.h +++ b/arch/powerpc/platforms/iseries/call_pci.h @@ -25,8 +25,8 @@ #ifndef _PLATFORMS_ISERIES_CALL_PCI_H #define _PLATFORMS_ISERIES_CALL_PCI_H -#include <asm/iSeries/HvCallSc.h> -#include <asm/iSeries/HvTypes.h> +#include <asm/iseries/hv_call_sc.h> +#include <asm/iseries/hv_types.h> /* * DSA == Direct Select Address diff --git a/arch/powerpc/platforms/iseries/call_sm.h b/arch/powerpc/platforms/iseries/call_sm.h index ef22316..c7e2516 100644 --- a/arch/powerpc/platforms/iseries/call_sm.h +++ b/arch/powerpc/platforms/iseries/call_sm.h @@ -23,8 +23,8 @@ * drive the hypervisor from the OS. */ -#include <asm/iSeries/HvCallSc.h> -#include <asm/iSeries/HvTypes.h> +#include <asm/iseries/hv_call_sc.h> +#include <asm/iseries/hv_types.h> #define HvCallSmGet64BitsOfAccessMap HvCallSm + 11 diff --git a/arch/powerpc/platforms/iseries/htab.c b/arch/powerpc/platforms/iseries/htab.c index b3c6c33..30bdcf3 100644 --- a/arch/powerpc/platforms/iseries/htab.c +++ b/arch/powerpc/platforms/iseries/htab.c @@ -39,15 +39,16 @@ static inline void iSeries_hunlock(unsigned long slot) spin_unlock(&iSeries_hlocks[(slot >> 4) & 0x3f]); } -static long iSeries_hpte_insert(unsigned long hpte_group, unsigned long va, - unsigned long prpn, unsigned long vflags, - unsigned long rflags) +long iSeries_hpte_insert(unsigned long hpte_group, unsigned long va, + unsigned long pa, unsigned long rflags, + unsigned long vflags, int psize) { - unsigned long arpn; long slot; hpte_t lhpte; int secondary = 0; + BUG_ON(psize != MMU_PAGE_4K); + /* * The hypervisor tries both primary and secondary. * If we are being called to insert in the secondary, @@ -59,8 +60,19 @@ static long iSeries_hpte_insert(unsigned long hpte_group, unsigned long va, iSeries_hlock(hpte_group); - slot = HvCallHpt_findValid(&lhpte, va >> PAGE_SHIFT); - BUG_ON(lhpte.v & HPTE_V_VALID); + slot = HvCallHpt_findValid(&lhpte, va >> HW_PAGE_SHIFT); + if (unlikely(lhpte.v & HPTE_V_VALID)) { + if (vflags & HPTE_V_BOLTED) { + HvCallHpt_setSwBits(slot, 0x10, 0); + HvCallHpt_setPp(slot, PP_RWXX); + iSeries_hunlock(hpte_group); + if (slot < 0) + return 0x8 | (slot & 7); + else + return slot & 7; + } + BUG(); + } if (slot == -1) { /* No available entry found in either group */ iSeries_hunlock(hpte_group); @@ -73,10 +85,9 @@ static long iSeries_hpte_insert(unsigned long hpte_group, unsigned long va, slot &= 0x7fffffffffffffff; } - arpn = phys_to_abs(prpn << PAGE_SHIFT) >> PAGE_SHIFT; - lhpte.v = (va >> 23) << HPTE_V_AVPN_SHIFT | vflags | HPTE_V_VALID; - lhpte.r = (arpn << HPTE_R_RPN_SHIFT) | rflags; + lhpte.v = hpte_encode_v(va, MMU_PAGE_4K) | vflags | HPTE_V_VALID; + lhpte.r = hpte_encode_r(phys_to_abs(pa), MMU_PAGE_4K) | rflags; /* Now fill in the actual HPTE */ HvCallHpt_addValidate(slot, secondary, &lhpte); @@ -86,25 +97,6 @@ static long iSeries_hpte_insert(unsigned long hpte_group, unsigned long va, return (secondary << 3) | (slot & 7); } -long iSeries_hpte_bolt_or_insert(unsigned long hpte_group, - unsigned long va, unsigned long prpn, unsigned long vflags, - unsigned long rflags) -{ - long slot; - hpte_t lhpte; - - slot = HvCallHpt_findValid(&lhpte, va >> PAGE_SHIFT); - - if (lhpte.v & HPTE_V_VALID) { - /* Bolt the existing HPTE */ - HvCallHpt_setSwBits(slot, 0x10, 0); - HvCallHpt_setPp(slot, PP_RWXX); - return 0; - } - - return iSeries_hpte_insert(hpte_group, va, prpn, vflags, rflags); -} - static unsigned long iSeries_hpte_getword0(unsigned long slot) { hpte_t hpte; @@ -150,15 +142,17 @@ static long iSeries_hpte_remove(unsigned long hpte_group) * bits 61..63 : PP2,PP1,PP0 */ static long iSeries_hpte_updatepp(unsigned long slot, unsigned long newpp, - unsigned long va, int large, int local) + unsigned long va, int psize, int local) { hpte_t hpte; - unsigned long avpn = va >> 23; + unsigned long want_v; iSeries_hlock(slot); HvCallHpt_get(&hpte, slot); - if ((HPTE_V_AVPN_VAL(hpte.v) == avpn) && (hpte.v & HPTE_V_VALID)) { + want_v = hpte_encode_v(va, MMU_PAGE_4K); + + if (HPTE_V_COMPARE(hpte.v, want_v) && (hpte.v & HPTE_V_VALID)) { /* * Hypervisor expects bits as NPPP, which is * different from how they are mapped in our PP. @@ -210,14 +204,17 @@ static long iSeries_hpte_find(unsigned long vpn) * * No need to lock here because we should be the only user. */ -static void iSeries_hpte_updateboltedpp(unsigned long newpp, unsigned long ea) +static void iSeries_hpte_updateboltedpp(unsigned long newpp, unsigned long ea, + int psize) { unsigned long vsid,va,vpn; long slot; + BUG_ON(psize != MMU_PAGE_4K); + vsid = get_kernel_vsid(ea); va = (vsid << 28) | (ea & 0x0fffffff); - vpn = va >> PAGE_SHIFT; + vpn = va >> HW_PAGE_SHIFT; slot = iSeries_hpte_find(vpn); if (slot == -1) panic("updateboltedpp: Could not find page to bolt\n"); @@ -225,7 +222,7 @@ static void iSeries_hpte_updateboltedpp(unsigned long newpp, unsigned long ea) } static void iSeries_hpte_invalidate(unsigned long slot, unsigned long va, - int large, int local) + int psize, int local) { unsigned long hpte_v; unsigned long avpn = va >> 23; diff --git a/arch/powerpc/platforms/iseries/hvlog.c b/arch/powerpc/platforms/iseries/hvlog.c index f61e2e9..f476d71 100644 --- a/arch/powerpc/platforms/iseries/hvlog.c +++ b/arch/powerpc/platforms/iseries/hvlog.c @@ -9,9 +9,9 @@ #include <asm/page.h> #include <asm/abs_addr.h> -#include <asm/iSeries/HvCall.h> -#include <asm/iSeries/HvCallSc.h> -#include <asm/iSeries/HvTypes.h> +#include <asm/iseries/hv_call.h> +#include <asm/iseries/hv_call_sc.h> +#include <asm/iseries/hv_types.h> void HvCall_writeLogBuffer(const void *buffer, u64 len) @@ -22,7 +22,7 @@ void HvCall_writeLogBuffer(const void *buffer, u64 len) while (len) { hv_buf.addr = cur; - left_this_page = ((cur & PAGE_MASK) + PAGE_SIZE) - cur; + left_this_page = ((cur & HW_PAGE_MASK) + HW_PAGE_SIZE) - cur; if (left_this_page > len) left_this_page = len; hv_buf.len = left_this_page; @@ -30,6 +30,6 @@ void HvCall_writeLogBuffer(const void *buffer, u64 len) HvCall2(HvCallBaseWriteLogBuffer, virt_to_abs(&hv_buf), left_this_page); - cur = (cur & PAGE_MASK) + PAGE_SIZE; + cur = (cur & HW_PAGE_MASK) + HW_PAGE_SIZE; } } diff --git a/arch/powerpc/platforms/iseries/hvlpconfig.c b/arch/powerpc/platforms/iseries/hvlpconfig.c index dc28621..663a1af 100644 --- a/arch/powerpc/platforms/iseries/hvlpconfig.c +++ b/arch/powerpc/platforms/iseries/hvlpconfig.c @@ -17,7 +17,7 @@ */ #include <linux/module.h> -#include <asm/iSeries/HvLpConfig.h> +#include <asm/iseries/hv_lp_config.h> HvLpIndex HvLpConfig_getLpIndex_outline(void) { diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c index 1db26d8..bf081b3 100644 --- a/arch/powerpc/platforms/iseries/iommu.c +++ b/arch/powerpc/platforms/iseries/iommu.c @@ -32,7 +32,7 @@ #include <asm/machdep.h> #include <asm/abs_addr.h> #include <asm/pci-bridge.h> -#include <asm/iSeries/HvCallXm.h> +#include <asm/iseries/hv_call_xm.h> extern struct list_head iSeries_Global_Device_List; @@ -43,9 +43,12 @@ static void tce_build_iSeries(struct iommu_table *tbl, long index, long npages, u64 rc; union tce_entry tce; + index <<= TCE_PAGE_FACTOR; + npages <<= TCE_PAGE_FACTOR; + while (npages--) { tce.te_word = 0; - tce.te_bits.tb_rpn = virt_to_abs(uaddr) >> PAGE_SHIFT; + tce.te_bits.tb_rpn = virt_to_abs(uaddr) >> TCE_SHIFT; if (tbl->it_type == TCE_VB) { /* Virtual Bus */ @@ -66,7 +69,7 @@ static void tce_build_iSeries(struct iommu_table *tbl, long index, long npages, panic("PCI_DMA: HvCallXm_setTce failed, Rc: 0x%lx\n", rc); index++; - uaddr += PAGE_SIZE; + uaddr += TCE_PAGE_SIZE; } } @@ -74,6 +77,9 @@ static void tce_free_iSeries(struct iommu_table *tbl, long index, long npages) { u64 rc; + npages <<= TCE_PAGE_FACTOR; + index <<= TCE_PAGE_FACTOR; + while (npages--) { rc = HvCallXm_setTce((u64)tbl->it_index, (u64)index, 0); if (rc) @@ -83,27 +89,6 @@ static void tce_free_iSeries(struct iommu_table *tbl, long index, long npages) } } -#ifdef CONFIG_PCI -/* - * This function compares the known tables to find an iommu_table - * that has already been built for hardware TCEs. - */ -static struct iommu_table *iommu_table_find(struct iommu_table * tbl) -{ - struct pci_dn *pdn; - - list_for_each_entry(pdn, &iSeries_Global_Device_List, Device_List) { - struct iommu_table *it = pdn->iommu_table; - if ((it != NULL) && - (it->it_type == TCE_PCI) && - (it->it_offset == tbl->it_offset) && - (it->it_index == tbl->it_index) && - (it->it_size == tbl->it_size)) - return it; - } - return NULL; -} - /* * Call Hv with the architected data structure to get TCE table info. * info. Put the returned data into the Linux representation of the @@ -113,8 +98,10 @@ static struct iommu_table *iommu_table_find(struct iommu_table * tbl) * 2. TCE table per Bus. * 3. TCE Table per IOA. */ -static void iommu_table_getparms(struct pci_dn *pdn, - struct iommu_table* tbl) +void iommu_table_getparms_iSeries(unsigned long busno, + unsigned char slotno, + unsigned char virtbus, + struct iommu_table* tbl) { struct iommu_table_cb *parms; @@ -124,9 +111,9 @@ static void iommu_table_getparms(struct pci_dn *pdn, memset(parms, 0, sizeof(*parms)); - parms->itc_busno = pdn->busno; - parms->itc_slotno = pdn->LogicalSlot; - parms->itc_virtbus = 0; + parms->itc_busno = busno; + parms->itc_slotno = slotno; + parms->itc_virtbus = virtbus; HvCallXm_getTceTableParms(iseries_hv_addr(parms)); @@ -134,17 +121,40 @@ static void iommu_table_getparms(struct pci_dn *pdn, panic("PCI_DMA: parms->size is zero, parms is 0x%p", parms); /* itc_size is in pages worth of table, it_size is in # of entries */ - tbl->it_size = (parms->itc_size * PAGE_SIZE) / sizeof(union tce_entry); + tbl->it_size = ((parms->itc_size * TCE_PAGE_SIZE) / + sizeof(union tce_entry)) >> TCE_PAGE_FACTOR; tbl->it_busno = parms->itc_busno; - tbl->it_offset = parms->itc_offset; + tbl->it_offset = parms->itc_offset >> TCE_PAGE_FACTOR; tbl->it_index = parms->itc_index; tbl->it_blocksize = 1; - tbl->it_type = TCE_PCI; + tbl->it_type = virtbus ? TCE_VB : TCE_PCI; kfree(parms); } +#ifdef CONFIG_PCI +/* + * This function compares the known tables to find an iommu_table + * that has already been built for hardware TCEs. + */ +static struct iommu_table *iommu_table_find(struct iommu_table * tbl) +{ + struct pci_dn *pdn; + + list_for_each_entry(pdn, &iSeries_Global_Device_List, Device_List) { + struct iommu_table *it = pdn->iommu_table; + if ((it != NULL) && + (it->it_type == TCE_PCI) && + (it->it_offset == tbl->it_offset) && + (it->it_index == tbl->it_index) && + (it->it_size == tbl->it_size)) + return it; + } + return NULL; +} + + void iommu_devnode_init_iSeries(struct device_node *dn) { struct iommu_table *tbl; @@ -152,7 +162,7 @@ void iommu_devnode_init_iSeries(struct device_node *dn) tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL); - iommu_table_getparms(pdn, tbl); + iommu_table_getparms_iSeries(pdn->busno, pdn->LogicalSlot, 0, tbl); /* Look for existing tce table */ pdn->iommu_table = iommu_table_find(tbl); diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c index 937ac99..01090e9 100644 --- a/arch/powerpc/platforms/iseries/irq.c +++ b/arch/powerpc/platforms/iseries/irq.c @@ -35,10 +35,9 @@ #include <linux/irq.h> #include <linux/spinlock.h> -#include <asm/ppcdebug.h> -#include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/HvLpEvent.h> -#include <asm/iSeries/HvCallXm.h> +#include <asm/iseries/hv_types.h> +#include <asm/iseries/hv_lp_event.h> +#include <asm/iseries/hv_call_xm.h> #include "irq.h" #include "call_pci.h" @@ -104,6 +103,9 @@ static void intReceived(struct XmPciLpEvent *eventParm, struct pt_regs *regsParm) { int irq; +#ifdef CONFIG_IRQSTACKS + struct thread_info *curtp, *irqtp; +#endif ++Pci_Interrupt_Count; @@ -111,7 +113,20 @@ static void intReceived(struct XmPciLpEvent *eventParm, case XmPciLpEvent_SlotInterrupt: irq = eventParm->hvLpEvent.xCorrelationToken; /* Dispatch the interrupt handlers for this irq */ - ppc_irq_dispatch_handler(regsParm, irq); +#ifdef CONFIG_IRQSTACKS + /* Switch to the irq stack to handle this */ + curtp = current_thread_info(); + irqtp = hardirq_ctx[smp_processor_id()]; + if (curtp != irqtp) { + irqtp->task = curtp->task; + irqtp->flags = 0; + call___do_IRQ(irq, regsParm, irqtp); + irqtp->task = NULL; + if (irqtp->flags) + set_bits(irqtp->flags, &curtp->flags); + } else +#endif + __do_IRQ(irq, regsParm); HvCallPci_eoi(eventParm->eventData.slotInterrupt.busNumber, eventParm->eventData.slotInterrupt.subBusNumber, eventParm->eventData.slotInterrupt.deviceId); @@ -227,8 +242,6 @@ static void iSeries_enable_IRQ(unsigned int irq) /* Unmask secondary INTA */ mask = 0x80000000; HvCallPci_unmaskInterrupts(bus, subBus, deviceId, mask); - PPCDBG(PPCDBG_BUSWALK, "iSeries_enable_IRQ 0x%02X.%02X.%02X 0x%04X\n", - bus, subBus, deviceId, irq); } /* This is called by iSeries_activate_IRQs */ @@ -310,15 +323,11 @@ static void iSeries_disable_IRQ(unsigned int irq) /* Mask secondary INTA */ mask = 0x80000000; HvCallPci_maskInterrupts(bus, subBus, deviceId, mask); - PPCDBG(PPCDBG_BUSWALK, "iSeries_disable_IRQ 0x%02X.%02X.%02X 0x%04X\n", - bus, subBus, deviceId, irq); } /* - * Need to define this so ppc_irq_dispatch_handler will NOT call - * enable_IRQ at the end of interrupt handling. However, this does - * nothing because there is not enough information provided to do - * the EOI HvCall. This is done by XmPciLpEvent.c + * This does nothing because there is not enough information + * provided to do the EOI HvCall. This is done by XmPciLpEvent.c */ static void iSeries_end_IRQ(unsigned int irq) { diff --git a/arch/powerpc/platforms/iseries/ksyms.c b/arch/powerpc/platforms/iseries/ksyms.c index f271b35..a220084 100644 --- a/arch/powerpc/platforms/iseries/ksyms.c +++ b/arch/powerpc/platforms/iseries/ksyms.c @@ -9,7 +9,7 @@ #include <linux/module.h> #include <asm/hw_irq.h> -#include <asm/iSeries/HvCallSc.h> +#include <asm/iseries/hv_call_sc.h> EXPORT_SYMBOL(HvCall0); EXPORT_SYMBOL(HvCall1); diff --git a/arch/powerpc/platforms/iseries/lpardata.c b/arch/powerpc/platforms/iseries/lpardata.c index ed2ffee..bb8c915 100644 --- a/arch/powerpc/platforms/iseries/lpardata.c +++ b/arch/powerpc/platforms/iseries/lpardata.c @@ -13,16 +13,16 @@ #include <linux/bitops.h> #include <asm/processor.h> #include <asm/ptrace.h> -#include <asm/naca.h> #include <asm/abs_addr.h> -#include <asm/iSeries/ItLpNaca.h> +#include <asm/iseries/it_lp_naca.h> #include <asm/lppaca.h> -#include <asm/iSeries/ItLpRegSave.h> +#include <asm/iseries/it_lp_reg_save.h> #include <asm/paca.h> -#include <asm/iSeries/LparMap.h> -#include <asm/iSeries/ItExtVpdPanel.h> -#include <asm/iSeries/ItLpQueue.h> +#include <asm/iseries/lpar_map.h> +#include <asm/iseries/it_exp_vpd_panel.h> +#include <asm/iseries/it_lp_queue.h> +#include "naca.h" #include "vpd_areas.h" #include "spcomm_area.h" #include "ipl_parms.h" diff --git a/arch/powerpc/platforms/iseries/lpevents.c b/arch/powerpc/platforms/iseries/lpevents.c index 54c7753..e9fb98b 100644 --- a/arch/powerpc/platforms/iseries/lpevents.c +++ b/arch/powerpc/platforms/iseries/lpevents.c @@ -17,10 +17,10 @@ #include <asm/system.h> #include <asm/paca.h> -#include <asm/iSeries/ItLpQueue.h> -#include <asm/iSeries/HvLpEvent.h> -#include <asm/iSeries/HvCallEvent.h> -#include <asm/iSeries/ItLpNaca.h> +#include <asm/iseries/it_lp_queue.h> +#include <asm/iseries/hv_lp_event.h> +#include <asm/iseries/hv_call_event.h> +#include <asm/iseries/it_lp_naca.h> /* * The LpQueue is used to pass event data from the hypervisor to diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c index e5de31a..49e7e4b 100644 --- a/arch/powerpc/platforms/iseries/mf.c +++ b/arch/powerpc/platforms/iseries/mf.c @@ -38,10 +38,10 @@ #include <asm/uaccess.h> #include <asm/paca.h> #include <asm/abs_addr.h> -#include <asm/iSeries/vio.h> -#include <asm/iSeries/mf.h> -#include <asm/iSeries/HvLpConfig.h> -#include <asm/iSeries/ItLpQueue.h> +#include <asm/iseries/vio.h> +#include <asm/iseries/mf.h> +#include <asm/iseries/hv_lp_config.h> +#include <asm/iseries/it_lp_queue.h> #include "setup.h" diff --git a/arch/powerpc/platforms/iseries/misc.S b/arch/powerpc/platforms/iseries/misc.S index 09f1452..dfe7aa1 100644 --- a/arch/powerpc/platforms/iseries/misc.S +++ b/arch/powerpc/platforms/iseries/misc.S @@ -15,6 +15,7 @@ #include <asm/processor.h> #include <asm/asm-offsets.h> +#include <asm/ppc_asm.h> .text diff --git a/arch/powerpc/platforms/iseries/naca.h b/arch/powerpc/platforms/iseries/naca.h new file mode 100644 index 0000000..ab2372e --- /dev/null +++ b/arch/powerpc/platforms/iseries/naca.h @@ -0,0 +1,24 @@ +#ifndef _PLATFORMS_ISERIES_NACA_H +#define _PLATFORMS_ISERIES_NACA_H + +/* + * c 2001 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <asm/types.h> + +struct naca_struct { + /* Kernel only data - undefined for user space */ + void *xItVpdAreas; /* VPD Data 0x00 */ + void *xRamDisk; /* iSeries ramdisk 0x08 */ + u64 xRamDiskSize; /* In pages 0x10 */ +}; + +extern struct naca_struct naca; + +#endif /* _PLATFORMS_ISERIES_NACA_H */ diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c index 959e59f..4b75131 100644 --- a/arch/powerpc/platforms/iseries/pci.c +++ b/arch/powerpc/platforms/iseries/pci.c @@ -32,12 +32,11 @@ #include <asm/prom.h> #include <asm/machdep.h> #include <asm/pci-bridge.h> -#include <asm/ppcdebug.h> #include <asm/iommu.h> #include <asm/abs_addr.h> -#include <asm/iSeries/HvCallXm.h> -#include <asm/iSeries/mf.h> +#include <asm/iseries/hv_call_xm.h> +#include <asm/iseries/mf.h> #include <asm/ppc-pci.h> @@ -207,10 +206,6 @@ static struct device_node *build_device_node(HvBusNumber Bus, struct device_node *node; struct pci_dn *pdn; - PPCDBG(PPCDBG_BUSWALK, - "-build_device_node 0x%02X.%02X.%02X Function: %02X\n", - Bus, SubBus, AgentId, Function); - node = kmalloc(sizeof(struct device_node), GFP_KERNEL); if (node == NULL) return NULL; @@ -243,8 +238,6 @@ unsigned long __init find_and_init_phbs(void) struct pci_controller *phb; HvBusNumber bus; - PPCDBG(PPCDBG_BUSWALK, "find_and_init_phbs Entry\n"); - /* Check all possible buses. */ for (bus = 0; bus < 256; bus++) { int ret = HvCallXm_testBus(bus); @@ -261,9 +254,6 @@ unsigned long __init find_and_init_phbs(void) phb->last_busno = bus; phb->ops = &iSeries_pci_ops; - PPCDBG(PPCDBG_BUSWALK, "PCI:Create iSeries pci_controller(%p), Bus: %04X\n", - phb, bus); - /* Find and connect the devices. */ scan_PHB_slots(phb); } @@ -285,11 +275,9 @@ unsigned long __init find_and_init_phbs(void) */ void iSeries_pcibios_init(void) { - PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_init Entry.\n"); iomm_table_initialize(); find_and_init_phbs(); io_page_mask = -1; - PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_init Exit.\n"); } /* @@ -301,8 +289,6 @@ void __init iSeries_pci_final_fixup(void) struct device_node *node; int DeviceCount = 0; - PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_fixup Entry.\n"); - /* Fix up at the device node and pci_dev relationship */ mf_display_src(0xC9000100); @@ -316,9 +302,6 @@ void __init iSeries_pci_final_fixup(void) ++DeviceCount; pdev->sysdata = (void *)node; PCI_DN(node)->pcidev = pdev; - PPCDBG(PPCDBG_BUSWALK, - "pdev 0x%p <==> DevNode 0x%p\n", - pdev, node); allocate_device_bars(pdev); iSeries_Device_Information(pdev, DeviceCount); iommu_devnode_init_iSeries(node); @@ -333,13 +316,10 @@ void __init iSeries_pci_final_fixup(void) void pcibios_fixup_bus(struct pci_bus *PciBus) { - PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_fixup_bus(0x%04X) Entry.\n", - PciBus->number); } void pcibios_fixup_resources(struct pci_dev *pdev) { - PPCDBG(PPCDBG_BUSWALK, "fixup_resources pdev %p\n", pdev); } /* @@ -401,9 +381,6 @@ static void scan_EADS_bridge(HvBusNumber bus, HvSubBusNumber SubBus, printk("found device at bus %d idsel %d func %d (AgentId %x)\n", bus, IdSel, Function, AgentId); /* Connect EADs: 0x18.00.12 = 0x00 */ - PPCDBG(PPCDBG_BUSWALK, - "PCI:Connect EADs: 0x%02X.%02X.%02X\n", - bus, SubBus, AgentId); HvRc = HvCallPci_getBusUnitInfo(bus, SubBus, AgentId, iseries_hv_addr(BridgeInfo), sizeof(struct HvCallPci_BridgeInfo)); @@ -414,14 +391,6 @@ static void scan_EADS_bridge(HvBusNumber bus, HvSubBusNumber SubBus, BridgeInfo->maxAgents, BridgeInfo->maxSubBusNumber, BridgeInfo->logicalSlotNumber); - PPCDBG(PPCDBG_BUSWALK, - "PCI: BridgeInfo, Type:0x%02X, SubBus:0x%02X, MaxAgents:0x%02X, MaxSubBus: 0x%02X, LSlot: 0x%02X\n", - BridgeInfo->busUnitInfo.deviceType, - BridgeInfo->subBusNumber, - BridgeInfo->maxAgents, - BridgeInfo->maxSubBusNumber, - BridgeInfo->logicalSlotNumber); - if (BridgeInfo->busUnitInfo.deviceType == HvCallPci_BridgeDevice) { /* Scan_Bridge_Slot...: 0x18.00.12 */ @@ -454,9 +423,6 @@ static int scan_bridge_slot(HvBusNumber Bus, /* iSeries_allocate_IRQ.: 0x18.00.12(0xA3) */ Irq = iSeries_allocate_IRQ(Bus, 0, EADsIdSel); - PPCDBG(PPCDBG_BUSWALK, - "PCI:- allocate and assign IRQ 0x%02X.%02X.%02X = 0x%02X\n", - Bus, 0, EADsIdSel, Irq); /* * Connect all functions of any device found. @@ -482,9 +448,6 @@ static int scan_bridge_slot(HvBusNumber Bus, printk("read vendor ID: %x\n", VendorId); /* FoundDevice: 0x18.28.10 = 0x12AE */ - PPCDBG(PPCDBG_BUSWALK, - "PCI:- FoundDevice: 0x%02X.%02X.%02X = 0x%04X, irq %d\n", - Bus, SubBus, AgentId, VendorId, Irq); HvRc = HvCallPci_configStore8(Bus, SubBus, AgentId, PCI_INTERRUPT_LINE, Irq); if (HvRc != 0) diff --git a/arch/powerpc/platforms/iseries/proc.c b/arch/powerpc/platforms/iseries/proc.c index 6f1929c..e68b6b5 100644 --- a/arch/powerpc/platforms/iseries/proc.c +++ b/arch/powerpc/platforms/iseries/proc.c @@ -24,8 +24,8 @@ #include <asm/processor.h> #include <asm/time.h> #include <asm/lppaca.h> -#include <asm/iSeries/ItLpQueue.h> -#include <asm/iSeries/HvCallXm.h> +#include <asm/iseries/it_lp_queue.h> +#include <asm/iseries/hv_call_xm.h> #include "processor_vpd.h" #include "main_store.h" diff --git a/arch/powerpc/platforms/iseries/release_data.h b/arch/powerpc/platforms/iseries/release_data.h index c68b9c3..66189fd 100644 --- a/arch/powerpc/platforms/iseries/release_data.h +++ b/arch/powerpc/platforms/iseries/release_data.h @@ -24,7 +24,7 @@ * address of the OS's NACA). */ #include <asm/types.h> -#include <asm/naca.h> +#include "naca.h" /* * When we IPL a secondary partition, we will check if if the diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 1544c6f..6a29f30 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -27,6 +27,7 @@ #include <linux/kdev_t.h> #include <linux/major.h> #include <linux/root_dev.h> +#include <linux/kernel.h> #include <asm/processor.h> #include <asm/machdep.h> @@ -38,21 +39,22 @@ #include <asm/sections.h> #include <asm/iommu.h> #include <asm/firmware.h> - +#include <asm/systemcfg.h> +#include <asm/system.h> #include <asm/time.h> -#include <asm/naca.h> #include <asm/paca.h> #include <asm/cache.h> #include <asm/sections.h> #include <asm/abs_addr.h> -#include <asm/iSeries/HvLpConfig.h> -#include <asm/iSeries/HvCallEvent.h> -#include <asm/iSeries/HvCallXm.h> -#include <asm/iSeries/ItLpQueue.h> -#include <asm/iSeries/mf.h> -#include <asm/iSeries/HvLpEvent.h> -#include <asm/iSeries/LparMap.h> - +#include <asm/iseries/hv_lp_config.h> +#include <asm/iseries/hv_call_event.h> +#include <asm/iseries/hv_call_xm.h> +#include <asm/iseries/it_lp_queue.h> +#include <asm/iseries/mf.h> +#include <asm/iseries/hv_lp_event.h> +#include <asm/iseries/lpar_map.h> + +#include "naca.h" #include "setup.h" #include "irq.h" #include "vpd_areas.h" @@ -70,9 +72,7 @@ extern void hvlog(char *fmt, ...); #endif /* Function Prototypes */ -extern void ppcdbg_initialize(void); - -static void build_iSeries_Memory_Map(void); +static unsigned long build_iSeries_Memory_Map(void); static void iseries_shared_idle(void); static void iseries_dedicated_idle(void); #ifdef CONFIG_PCI @@ -85,7 +85,6 @@ static void iSeries_pci_final_fixup(void) { } int piranha_simulator; extern int rd_size; /* Defined in drivers/block/rd.c */ -extern unsigned long klimit; extern unsigned long embedded_sysmap_start; extern unsigned long embedded_sysmap_end; @@ -94,6 +93,8 @@ extern unsigned long iSeries_recal_titan; static int mf_initialized; +static unsigned long cmd_mem_limit; + struct MemoryBlock { unsigned long absStart; unsigned long absEnd; @@ -306,8 +307,6 @@ static void __init iSeries_init_early(void) ppc64_firmware_features = FW_FEATURE_ISERIES; - ppcdbg_initialize(); - ppc64_interrupt_controller = IC_ISERIES; #if defined(CONFIG_BLK_DEV_INITRD) @@ -317,11 +316,11 @@ static void __init iSeries_init_early(void) */ if (naca.xRamDisk) { initrd_start = (unsigned long)__va(naca.xRamDisk); - initrd_end = initrd_start + naca.xRamDiskSize * PAGE_SIZE; + initrd_end = initrd_start + naca.xRamDiskSize * HW_PAGE_SIZE; initrd_below_start_ok = 1; // ramdisk in kernel space ROOT_DEV = Root_RAM0; - if (((rd_size * 1024) / PAGE_SIZE) < naca.xRamDiskSize) - rd_size = (naca.xRamDiskSize * PAGE_SIZE) / 1024; + if (((rd_size * 1024) / HW_PAGE_SIZE) < naca.xRamDiskSize) + rd_size = (naca.xRamDiskSize * HW_PAGE_SIZE) / 1024; } else #endif /* CONFIG_BLK_DEV_INITRD */ { @@ -341,23 +340,6 @@ static void __init iSeries_init_early(void) */ iommu_init_early_iSeries(); - iSeries_get_cmdline(); - - /* Save unparsed command line copy for /proc/cmdline */ - strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE); - - /* Parse early parameters, in particular mem=x */ - parse_early_param(); - - if (memory_limit) { - if (memory_limit < systemcfg->physicalMemorySize) - systemcfg->physicalMemorySize = memory_limit; - else { - printk("Ignoring mem=%lu >= ram_top.\n", memory_limit); - memory_limit = 0; - } - } - /* Initialize machine-dependency vectors */ #ifdef CONFIG_SMP smp_init_iSeries(); @@ -421,9 +403,11 @@ void mschunks_alloc(unsigned long num_chunks) * a table used to translate Linux's physical addresses to these * absolute addresses. Absolute addresses are needed when * communicating with the hypervisor (e.g. to build HPT entries) + * + * Returns the physical memory size */ -static void __init build_iSeries_Memory_Map(void) +static unsigned long __init build_iSeries_Memory_Map(void) { u32 loadAreaFirstChunk, loadAreaLastChunk, loadAreaSize; u32 nextPhysChunk; @@ -484,13 +468,14 @@ static void __init build_iSeries_Memory_Map(void) */ hptFirstChunk = (u32)addr_to_chunk(HvCallHpt_getHptAddress()); hptSizePages = (u32)HvCallHpt_getHptPages(); - hptSizeChunks = hptSizePages >> (MSCHUNKS_CHUNK_SHIFT - PAGE_SHIFT); + hptSizeChunks = hptSizePages >> + (MSCHUNKS_CHUNK_SHIFT - HW_PAGE_SHIFT); hptLastChunk = hptFirstChunk + hptSizeChunks - 1; printk("HPT absolute addr = %016lx, size = %dK\n", chunk_to_addr(hptFirstChunk), hptSizeChunks * 256); - ppc64_pft_size = __ilog2(hptSizePages * PAGE_SIZE); + ppc64_pft_size = __ilog2(hptSizePages * HW_PAGE_SIZE); /* * The actual hashed page table is in the hypervisor, @@ -555,7 +540,7 @@ static void __init build_iSeries_Memory_Map(void) * which should be equal to * nextPhysChunk */ - systemcfg->physicalMemorySize = chunk_to_addr(nextPhysChunk); + return chunk_to_addr(nextPhysChunk); } /* @@ -581,8 +566,8 @@ static void __init iSeries_setup_arch(void) printk("Max physical processors = %d\n", itVpdAreas.xSlicMaxPhysicalProcs); - systemcfg->processor = xIoHriProcessorVpd[procIx].xPVR; - printk("Processor version = %x\n", systemcfg->processor); + _systemcfg->processor = xIoHriProcessorVpd[procIx].xPVR; + printk("Processor version = %x\n", _systemcfg->processor); } static void iSeries_show_cpuinfo(struct seq_file *m) @@ -643,7 +628,7 @@ static void __init iSeries_fixup_klimit(void) */ if (naca.xRamDisk) klimit = KERNELBASE + (u64)naca.xRamDisk + - (naca.xRamDiskSize * PAGE_SIZE); + (naca.xRamDiskSize * HW_PAGE_SIZE); else { /* * No ram disk was included - check and see if there @@ -711,20 +696,18 @@ static void iseries_shared_idle(void) if (hvlpevent_is_pending()) process_iSeries_events(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } static void iseries_dedicated_idle(void) { - long oldval; + set_thread_flag(TIF_POLLING_NRFLAG); while (1) { - oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); - - if (!oldval) { - set_thread_flag(TIF_POLLING_NRFLAG); - + if (!need_resched()) { while (!need_resched()) { ppc64_runlatch_off(); HMT_low(); @@ -737,13 +720,12 @@ static void iseries_dedicated_idle(void) } HMT_medium(); - clear_thread_flag(TIF_POLLING_NRFLAG); - } else { - set_need_resched(); } ppc64_runlatch_on(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } @@ -948,7 +930,7 @@ void dt_cpus(struct iseries_flat_dt *dt) dt_end_node(dt); } -void build_flat_dt(struct iseries_flat_dt *dt) +void build_flat_dt(struct iseries_flat_dt *dt, unsigned long phys_mem_size) { u64 tmp[2]; @@ -964,13 +946,15 @@ void build_flat_dt(struct iseries_flat_dt *dt) dt_prop_str(dt, "name", "memory"); dt_prop_str(dt, "device_type", "memory"); tmp[0] = 0; - tmp[1] = systemcfg->physicalMemorySize; + tmp[1] = phys_mem_size; dt_prop_u64_list(dt, "reg", tmp, 2); dt_end_node(dt); /* /chosen */ dt_start_node(dt, "chosen"); dt_prop_u32(dt, "linux,platform", PLATFORM_ISERIES_LPAR); + if (cmd_mem_limit) + dt_prop_u64(dt, "linux,memory-limit", cmd_mem_limit); dt_end_node(dt); dt_cpus(dt); @@ -982,15 +966,37 @@ void build_flat_dt(struct iseries_flat_dt *dt) void * __init iSeries_early_setup(void) { + unsigned long phys_mem_size; + iSeries_fixup_klimit(); /* * Initialize the table which translate Linux physical addresses to * AS/400 absolute addresses */ - build_iSeries_Memory_Map(); + phys_mem_size = build_iSeries_Memory_Map(); + + iSeries_get_cmdline(); + + /* Save unparsed command line copy for /proc/cmdline */ + strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE); - build_flat_dt(&iseries_dt); + /* Parse early parameters, in particular mem=x */ + parse_early_param(); + + build_flat_dt(&iseries_dt, phys_mem_size); return (void *) __pa(&iseries_dt); } + +/* + * On iSeries we just parse the mem=X option from the command line. + * On pSeries it's a bit more complicated, see prom_init_mem() + */ +static int __init early_parsemem(char *p) +{ + if (p) + cmd_mem_limit = ALIGN(memparse(p, &p), PAGE_SIZE); + return 0; +} +early_param("mem", early_parsemem); diff --git a/arch/powerpc/platforms/iseries/smp.c b/arch/powerpc/platforms/iseries/smp.c index f720916..fcb094e 100644 --- a/arch/powerpc/platforms/iseries/smp.c +++ b/arch/powerpc/platforms/iseries/smp.c @@ -38,9 +38,8 @@ #include <asm/io.h> #include <asm/smp.h> #include <asm/paca.h> -#include <asm/iSeries/HvCall.h> +#include <asm/iseries/hv_call.h> #include <asm/time.h> -#include <asm/ppcdebug.h> #include <asm/machdep.h> #include <asm/cputable.h> #include <asm/system.h> diff --git a/arch/powerpc/platforms/iseries/vio.c b/arch/powerpc/platforms/iseries/vio.c index c0f7d2e..384360e 100644 --- a/arch/powerpc/platforms/iseries/vio.c +++ b/arch/powerpc/platforms/iseries/vio.c @@ -17,10 +17,10 @@ #include <asm/tce.h> #include <asm/abs_addr.h> #include <asm/page.h> -#include <asm/iSeries/vio.h> -#include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/HvLpConfig.h> -#include <asm/iSeries/HvCallXm.h> +#include <asm/iseries/vio.h> +#include <asm/iseries/hv_types.h> +#include <asm/iseries/hv_lp_config.h> +#include <asm/iseries/hv_call_xm.h> struct device *iSeries_vio_dev = &vio_bus_device.dev; EXPORT_SYMBOL(iSeries_vio_dev); @@ -30,41 +30,14 @@ static struct iommu_table vio_iommu_table; static void __init iommu_vio_init(void) { - struct iommu_table *t; - struct iommu_table_cb cb; - unsigned long cbp; - unsigned long itc_entries; + iommu_table_getparms_iSeries(255, 0, 0xff, &veth_iommu_table); + veth_iommu_table.it_size /= 2; + vio_iommu_table = veth_iommu_table; + vio_iommu_table.it_offset += veth_iommu_table.it_size; - cb.itc_busno = 255; /* Bus 255 is the virtual bus */ - cb.itc_virtbus = 0xff; /* Ask for virtual bus */ - - cbp = virt_to_abs(&cb); - HvCallXm_getTceTableParms(cbp); - - itc_entries = cb.itc_size * PAGE_SIZE / sizeof(union tce_entry); - veth_iommu_table.it_size = itc_entries / 2; - veth_iommu_table.it_busno = cb.itc_busno; - veth_iommu_table.it_offset = cb.itc_offset; - veth_iommu_table.it_index = cb.itc_index; - veth_iommu_table.it_type = TCE_VB; - veth_iommu_table.it_blocksize = 1; - - t = iommu_init_table(&veth_iommu_table); - - if (!t) + if (!iommu_init_table(&veth_iommu_table)) printk("Virtual Bus VETH TCE table failed.\n"); - - vio_iommu_table.it_size = itc_entries - veth_iommu_table.it_size; - vio_iommu_table.it_busno = cb.itc_busno; - vio_iommu_table.it_offset = cb.itc_offset + - veth_iommu_table.it_size; - vio_iommu_table.it_index = cb.itc_index; - vio_iommu_table.it_type = TCE_VB; - vio_iommu_table.it_blocksize = 1; - - t = iommu_init_table(&vio_iommu_table); - - if (!t) + if (!iommu_init_table(&vio_iommu_table)) printk("Virtual Bus VIO TCE table failed.\n"); } diff --git a/arch/powerpc/platforms/iseries/viopath.c b/arch/powerpc/platforms/iseries/viopath.c index c0c767b..84267269 100644 --- a/arch/powerpc/platforms/iseries/viopath.c +++ b/arch/powerpc/platforms/iseries/viopath.c @@ -41,12 +41,12 @@ #include <asm/system.h> #include <asm/uaccess.h> -#include <asm/iSeries/HvTypes.h> -#include <asm/iSeries/ItExtVpdPanel.h> -#include <asm/iSeries/HvLpEvent.h> -#include <asm/iSeries/HvLpConfig.h> -#include <asm/iSeries/mf.h> -#include <asm/iSeries/vio.h> +#include <asm/iseries/hv_types.h> +#include <asm/iseries/it_exp_vpd_panel.h> +#include <asm/iseries/hv_lp_event.h> +#include <asm/iseries/hv_lp_config.h> +#include <asm/iseries/mf.h> +#include <asm/iseries/vio.h> /* Status of the path to each other partition in the system. * This is overkill, since we will only ever establish connections @@ -68,7 +68,8 @@ static DEFINE_SPINLOCK(statuslock); * For each kind of event we allocate a buffer that is * guaranteed not to cross a page boundary */ -static unsigned char event_buffer[VIO_MAX_SUBTYPES * 256] __page_aligned; +static unsigned char event_buffer[VIO_MAX_SUBTYPES * 256] + __attribute__((__aligned__(4096))); static atomic_t event_buffer_available[VIO_MAX_SUBTYPES]; static int event_buffer_initialised; @@ -116,12 +117,12 @@ static int proc_viopath_show(struct seq_file *m, void *v) HvLpEvent_Rc hvrc; DECLARE_MUTEX_LOCKED(Semaphore); - buf = kmalloc(PAGE_SIZE, GFP_KERNEL); + buf = kmalloc(HW_PAGE_SIZE, GFP_KERNEL); if (!buf) return 0; - memset(buf, 0, PAGE_SIZE); + memset(buf, 0, HW_PAGE_SIZE); - handle = dma_map_single(iSeries_vio_dev, buf, PAGE_SIZE, + handle = dma_map_single(iSeries_vio_dev, buf, HW_PAGE_SIZE, DMA_FROM_DEVICE); hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, @@ -131,7 +132,7 @@ static int proc_viopath_show(struct seq_file *m, void *v) viopath_sourceinst(viopath_hostLp), viopath_targetinst(viopath_hostLp), (u64)(unsigned long)&Semaphore, VIOVERSION << 16, - ((u64)handle) << 32, PAGE_SIZE, 0, 0); + ((u64)handle) << 32, HW_PAGE_SIZE, 0, 0); if (hvrc != HvLpEvent_Rc_Good) printk(VIOPATH_KERN_WARN "hv error on op %d\n", (int)hvrc); @@ -140,7 +141,7 @@ static int proc_viopath_show(struct seq_file *m, void *v) vlanMap = HvLpConfig_getVirtualLanIndexMap(); - buf[PAGE_SIZE-1] = '\0'; + buf[HW_PAGE_SIZE-1] = '\0'; seq_printf(m, "%s", buf); seq_printf(m, "AVAILABLE_VETH=%x\n", vlanMap); seq_printf(m, "SRLNBR=%c%c%c%c%c%c%c\n", @@ -152,7 +153,8 @@ static int proc_viopath_show(struct seq_file *m, void *v) e2a(xItExtVpdPanel.systemSerial[4]), e2a(xItExtVpdPanel.systemSerial[5])); - dma_unmap_single(iSeries_vio_dev, handle, PAGE_SIZE, DMA_FROM_DEVICE); + dma_unmap_single(iSeries_vio_dev, handle, HW_PAGE_SIZE, + DMA_FROM_DEVICE); kfree(buf); return 0; diff --git a/arch/powerpc/platforms/iseries/vpdinfo.c b/arch/powerpc/platforms/iseries/vpdinfo.c index 9c31884..23a6d1e 100644 --- a/arch/powerpc/platforms/iseries/vpdinfo.c +++ b/arch/powerpc/platforms/iseries/vpdinfo.c @@ -32,7 +32,7 @@ #include <asm/resource.h> #include <asm/abs_addr.h> #include <asm/pci-bridge.h> -#include <asm/iSeries/HvTypes.h> +#include <asm/iseries/hv_types.h> #include "pci.h" #include "call_pci.h" diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index 340c21c..895aeb3 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -380,9 +380,6 @@ void __init maple_pcibios_fixup(void) for_each_pci_dev(dev) pci_read_irq_line(dev); - /* Do the mapping of the IO space */ - phbs_remap_io(); - DBG(" <- maple_pcibios_fixup\n"); } diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile index 4369676..c9df44f 100644 --- a/arch/powerpc/platforms/powermac/Makefile +++ b/arch/powerpc/platforms/powermac/Makefile @@ -1,7 +1,8 @@ obj-y += pic.o setup.o time.o feature.o pci.o \ sleep.o low_i2c.o cache.o obj-$(CONFIG_PMAC_BACKLIGHT) += backlight.o -obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq.o +obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq_32.o +obj-$(CONFIG_CPU_FREQ_PMAC64) += cpufreq_64.o obj-$(CONFIG_NVRAM) += nvram.o # ppc64 pmac doesn't define CONFIG_NVRAM but needs nvram stuff obj-$(CONFIG_PPC64) += nvram.o diff --git a/arch/powerpc/platforms/powermac/cpufreq.c b/arch/powerpc/platforms/powermac/cpufreq_32.c index c47f8b6..56fd4e0 100644 --- a/arch/powerpc/platforms/powermac/cpufreq.c +++ b/arch/powerpc/platforms/powermac/cpufreq_32.c @@ -397,18 +397,16 @@ static int pmac_cpufreq_target( struct cpufreq_policy *policy, unsigned int relation) { unsigned int newstate = 0; + int rc; if (cpufreq_frequency_table_target(policy, pmac_cpu_freqs, target_freq, relation, &newstate)) return -EINVAL; - return do_set_cpu_speed(newstate, 1); -} + rc = do_set_cpu_speed(newstate, 1); -unsigned int pmac_get_one_cpufreq(int i) -{ - /* Supports only one CPU for now */ - return (i == 0) ? cur_freq : 0; + ppc_proc_freq = cur_freq * 1000ul; + return rc; } static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) @@ -474,6 +472,8 @@ static int pmac_cpufreq_resume(struct cpufreq_policy *policy) do_set_cpu_speed(sleep_freq == low_freq ? CPUFREQ_LOW : CPUFREQ_HIGH, 0); + ppc_proc_freq = cur_freq * 1000ul; + no_schedule = 0; return 0; } @@ -547,7 +547,7 @@ static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) */ if (low_freq < 98000000) low_freq = 101000000; - + /* Convert those to CPU core clocks */ low_freq = (low_freq * (*ratio)) / 2000; hi_freq = (hi_freq * (*ratio)) / 2000; @@ -714,6 +714,7 @@ out: pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq; pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq; + ppc_proc_freq = cur_freq * 1000ul; printk(KERN_INFO "Registering PowerMac CPU frequency driver\n"); printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n", diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c new file mode 100644 index 0000000..3915034 --- /dev/null +++ b/arch/powerpc/platforms/powermac/cpufreq_64.c @@ -0,0 +1,323 @@ +/* + * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> + * and Markus Demleitner <msdemlei@cl.uni-heidelberg.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs, + * that is iMac G5 and latest single CPU desktop. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/completion.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/irq.h> +#include <asm/sections.h> +#include <asm/cputable.h> +#include <asm/time.h> +#include <asm/smu.h> + +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt...) printk(fmt) +#else +#define DBG(fmt...) +#endif + +/* see 970FX user manual */ + +#define SCOM_PCR 0x0aa001 /* PCR scom addr */ + +#define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */ +#define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */ +#define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */ +#define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */ +#define PCR_SPEED_MASK 0x000e0000U /* speed mask */ +#define PCR_SPEED_SHIFT 17 +#define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */ +#define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */ +#define PCR_TARGET_TIME_MASK 0x00006000U /* target time */ +#define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */ +#define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */ +#define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */ + +#define SCOM_PSR 0x408001 /* PSR scom addr */ +/* warning: PSR is a 64 bits register */ +#define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */ +#define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */ +#define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */ +#define PSR_CUR_SPEED_SHIFT (56) + +/* + * The G5 only supports two frequencies (Quarter speed is not supported) + */ +#define CPUFREQ_HIGH 0 +#define CPUFREQ_LOW 1 + +static struct cpufreq_frequency_table g5_cpu_freqs[] = { + {CPUFREQ_HIGH, 0}, + {CPUFREQ_LOW, 0}, + {0, CPUFREQ_TABLE_END}, +}; + +static struct freq_attr* g5_cpu_freqs_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +/* Power mode data is an array of the 32 bits PCR values to use for + * the various frequencies, retreived from the device-tree + */ +static u32 *g5_pmode_data; +static int g5_pmode_max; +static int g5_pmode_cur; + +static DECLARE_MUTEX(g5_switch_mutex); + + +static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */ +static int g5_fvt_count; /* number of op. points */ +static int g5_fvt_cur; /* current op. point */ + +/* ----------------- real hardware interface */ + +static void g5_switch_volt(int speed_mode) +{ + struct smu_simple_cmd cmd; + + DECLARE_COMPLETION(comp); + smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, smu_done_complete, + &comp, 'V', 'S', 'L', 'E', 'W', + 0xff, g5_fvt_cur+1, speed_mode); + wait_for_completion(&comp); +} + +static int g5_switch_freq(int speed_mode) +{ + struct cpufreq_freqs freqs; + int to; + + if (g5_pmode_cur == speed_mode) + return 0; + + down(&g5_switch_mutex); + + freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency; + freqs.new = g5_cpu_freqs[speed_mode].frequency; + freqs.cpu = 0; + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + /* If frequency is going up, first ramp up the voltage */ + if (speed_mode < g5_pmode_cur) + g5_switch_volt(speed_mode); + + /* Clear PCR high */ + scom970_write(SCOM_PCR, 0); + /* Clear PCR low */ + scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0); + /* Set PCR low */ + scom970_write(SCOM_PCR, PCR_HILO_SELECT | + g5_pmode_data[speed_mode]); + + /* Wait for completion */ + for (to = 0; to < 10; to++) { + unsigned long psr = scom970_read(SCOM_PSR); + + if ((psr & PSR_CMD_RECEIVED) == 0 && + (((psr >> PSR_CUR_SPEED_SHIFT) ^ + (g5_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3) + == 0) + break; + if (psr & PSR_CMD_COMPLETED) + break; + udelay(100); + } + + /* If frequency is going down, last ramp the voltage */ + if (speed_mode > g5_pmode_cur) + g5_switch_volt(speed_mode); + + g5_pmode_cur = speed_mode; + ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + up(&g5_switch_mutex); + + return 0; +} + +static int g5_query_freq(void) +{ + unsigned long psr = scom970_read(SCOM_PSR); + int i; + + for (i = 0; i <= g5_pmode_max; i++) + if ((((psr >> PSR_CUR_SPEED_SHIFT) ^ + (g5_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0) + break; + return i; +} + +/* ----------------- cpufreq bookkeeping */ + +static int g5_cpufreq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, g5_cpu_freqs); +} + +static int g5_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + unsigned int newstate = 0; + + if (cpufreq_frequency_table_target(policy, g5_cpu_freqs, + target_freq, relation, &newstate)) + return -EINVAL; + + return g5_switch_freq(newstate); +} + +static unsigned int g5_cpufreq_get_speed(unsigned int cpu) +{ + return g5_cpu_freqs[g5_pmode_cur].frequency; +} + +static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + if (policy->cpu != 0) + return -ENODEV; + + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + policy->cur = g5_cpu_freqs[g5_query_freq()].frequency; + cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu); + + return cpufreq_frequency_table_cpuinfo(policy, + g5_cpu_freqs); +} + + +static struct cpufreq_driver g5_cpufreq_driver = { + .name = "powermac", + .owner = THIS_MODULE, + .flags = CPUFREQ_CONST_LOOPS, + .init = g5_cpufreq_cpu_init, + .verify = g5_cpufreq_verify, + .target = g5_cpufreq_target, + .get = g5_cpufreq_get_speed, + .attr = g5_cpu_freqs_attr, +}; + + +static int __init g5_cpufreq_init(void) +{ + struct device_node *cpunode; + unsigned int psize, ssize; + struct smu_sdbp_header *shdr; + unsigned long max_freq; + u32 *valp; + int rc = -ENODEV; + + /* Look for CPU and SMU nodes */ + cpunode = of_find_node_by_type(NULL, "cpu"); + if (!cpunode) { + DBG("No CPU node !\n"); + return -ENODEV; + } + + /* Check 970FX for now */ + valp = (u32 *)get_property(cpunode, "cpu-version", NULL); + if (!valp) { + DBG("No cpu-version property !\n"); + goto bail_noprops; + } + if (((*valp) >> 16) != 0x3c) { + DBG("Wrong CPU version: %08x\n", *valp); + goto bail_noprops; + } + + /* Look for the powertune data in the device-tree */ + g5_pmode_data = (u32 *)get_property(cpunode, "power-mode-data",&psize); + if (!g5_pmode_data) { + DBG("No power-mode-data !\n"); + goto bail_noprops; + } + g5_pmode_max = psize / sizeof(u32) - 1; + + /* Look for the FVT table */ + shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL); + if (!shdr) + goto bail_noprops; + g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1]; + ssize = (shdr->len * sizeof(u32)) - sizeof(struct smu_sdbp_header); + g5_fvt_count = ssize / sizeof(struct smu_sdbp_fvt); + g5_fvt_cur = 0; + + /* Sanity checking */ + if (g5_fvt_count < 1 || g5_pmode_max < 1) + goto bail_noprops; + + /* + * From what I see, clock-frequency is always the maximal frequency. + * The current driver can not slew sysclk yet, so we really only deal + * with powertune steps for now. We also only implement full freq and + * half freq in this version. So far, I haven't yet seen a machine + * supporting anything else. + */ + valp = (u32 *)get_property(cpunode, "clock-frequency", NULL); + if (!valp) + return -ENODEV; + max_freq = (*valp)/1000; + g5_cpu_freqs[0].frequency = max_freq; + g5_cpu_freqs[1].frequency = max_freq/2; + + /* Check current frequency */ + g5_pmode_cur = g5_query_freq(); + if (g5_pmode_cur > 1) + /* We don't support anything but 1:1 and 1:2, fixup ... */ + g5_pmode_cur = 1; + + /* Force apply current frequency to make sure everything is in + * sync (voltage is right for example). Firmware may leave us with + * a strange setting ... + */ + g5_switch_freq(g5_pmode_cur); + + printk(KERN_INFO "Registering G5 CPU frequency driver\n"); + printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", + g5_cpu_freqs[1].frequency/1000, + g5_cpu_freqs[0].frequency/1000, + g5_cpu_freqs[g5_pmode_cur].frequency/1000); + + rc = cpufreq_register_driver(&g5_cpufreq_driver); + + /* We keep the CPU node on hold... hopefully, Apple G5 don't have + * hotplug CPU with a dynamic device-tree ... + */ + return rc; + + bail_noprops: + of_node_put(cpunode); + + return rc; +} + +module_init(g5_cpufreq_init); + + +MODULE_LICENSE("GPL"); diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index 8f818d0..dfd41b9 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -918,9 +918,6 @@ void __init pmac_pci_init(void) PCI_DN(np)->busno = 0xf0; } - /* map in PCI I/O space */ - phbs_remap_io(); - /* pmac_check_ht_link(); */ /* Tell pci.c to not use the common resource allocation mechanism */ diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 0037a8c..90040c4 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -74,6 +74,9 @@ static DEFINE_SPINLOCK(pmac_pic_lock); #define GATWICK_IRQ_POOL_SIZE 10 static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE]; +#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) +static unsigned long ppc_lost_interrupts[NR_MASK_WORDS]; + /* * Mark an irq as "lost". This is only used on the pmac * since it can lose interrupts (see pmac_set_irq_mask). @@ -576,7 +579,7 @@ void __init pmac_pic_init(void) #endif /* CONFIG_PPC32 */ } -#ifdef CONFIG_PM +#if defined(CONFIG_PM) && defined(CONFIG_PPC32) /* * These procedures are used in implementing sleep on the powerbooks. * sleep_save_intrs() saves the states of all interrupt enables @@ -643,7 +646,7 @@ static int pmacpic_resume(struct sys_device *sysdev) return 0; } -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM && CONFIG_PPC32 */ static struct sysdev_class pmacpic_sysclass = { set_kset_name("pmac_pic"), @@ -655,10 +658,10 @@ static struct sys_device device_pmacpic = { }; static struct sysdev_driver driver_pmacpic = { -#ifdef CONFIG_PM +#if defined(CONFIG_PM) && defined(CONFIG_PPC32) .suspend = &pmacpic_suspend, .resume = &pmacpic_resume, -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM && CONFIG_PPC32 */ }; static int __init init_pmacpic_sysfs(void) diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 6f62af5..7acb054 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -75,6 +75,7 @@ #include <asm/smu.h> #include <asm/pmc.h> #include <asm/mpic.h> +#include <asm/lmb.h> #include "pmac.h" @@ -192,18 +193,6 @@ static void pmac_show_cpuinfo(struct seq_file *m) pmac_newworld ? "NewWorld" : "OldWorld"); } -static void pmac_show_percpuinfo(struct seq_file *m, int i) -{ -#ifdef CONFIG_CPU_FREQ_PMAC - extern unsigned int pmac_get_one_cpufreq(int i); - unsigned int freq = pmac_get_one_cpufreq(i); - if (freq != 0) { - seq_printf(m, "clock\t\t: %dMHz\n", freq/1000); - return; - } -#endif /* CONFIG_CPU_FREQ_PMAC */ -} - #ifndef CONFIG_ADB_CUDA int find_via_cuda(void) { @@ -350,7 +339,7 @@ void __init pmac_setup_arch(void) find_via_pmu(); smu_init(); -#ifdef CONFIG_NVRAM +#if defined(CONFIG_NVRAM) || defined(CONFIG_PPC64) pmac_nvram_init(); #endif @@ -766,7 +755,6 @@ struct machdep_calls __initdata pmac_md = { .setup_arch = pmac_setup_arch, .init_early = pmac_init_early, .show_cpuinfo = pmac_show_cpuinfo, - .show_percpuinfo = pmac_show_percpuinfo, .init_IRQ = pmac_pic_init, .get_irq = mpic_get_irq, /* changed later */ .pcibios_fixup = pmac_pcibios_fixup, diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index e1f9443..957b091 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -305,9 +305,19 @@ static int __init smp_psurge_probe(void) psurge_start = ioremap(PSURGE_START, 4); psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4); - /* this is not actually strictly necessary -- paulus. */ - for (i = 1; i < ncpus; ++i) - smp_hw_index[i] = i; + /* + * This is necessary because OF doesn't know about the + * secondary cpu(s), and thus there aren't nodes in the + * device tree for them, and smp_setup_cpu_maps hasn't + * set their bits in cpu_possible_map and cpu_present_map. + */ + if (ncpus > NR_CPUS) + ncpus = NR_CPUS; + for (i = 1; i < ncpus ; ++i) { + cpu_set(i, cpu_present_map); + cpu_set(i, cpu_possible_map); + set_hard_smp_processor_id(i, i); + } if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352); @@ -348,6 +358,7 @@ static void __init psurge_dual_sync_tb(int cpu_nr) int t; set_dec(tb_ticks_per_jiffy); + /* XXX fixme */ set_tb(0, 0); last_jiffy_stamp(cpu_nr) = 0; @@ -363,8 +374,6 @@ static void __init psurge_dual_sync_tb(int cpu_nr) /* now interrupt the secondary, starting both TBs */ psurge_set_ipi(1); - - smp_tb_synchronized = 1; } static struct irqaction psurge_irqaction = { @@ -625,9 +634,8 @@ void smp_core99_give_timebase(void) for (t = 100000; t > 0 && sec_tb_reset; --t) udelay(10); if (sec_tb_reset) + /* XXX BUG_ON here? */ printk(KERN_WARNING "Timeout waiting sync(2) on second CPU\n"); - else - smp_tb_synchronized = 1; /* Now, restart the timebase by leaving the GPIO to an open collector */ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 0); @@ -810,19 +818,9 @@ static void __devinit smp_core99_setup_cpu(int cpu_nr) } -/* Core99 Macs (dual G4s and G5s) */ -struct smp_ops_t core99_smp_ops = { - .message_pass = smp_mpic_message_pass, - .probe = smp_core99_probe, - .kick_cpu = smp_core99_kick_cpu, - .setup_cpu = smp_core99_setup_cpu, - .give_timebase = smp_core99_give_timebase, - .take_timebase = smp_core99_take_timebase, -}; - #if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32) -int __cpu_disable(void) +int smp_core99_cpu_disable(void) { cpu_clear(smp_processor_id(), cpu_online_map); @@ -846,7 +844,7 @@ void cpu_die(void) low_cpu_die(); } -void __cpu_die(unsigned int cpu) +void smp_core99_cpu_die(unsigned int cpu) { int timeout; @@ -858,8 +856,21 @@ void __cpu_die(unsigned int cpu) } msleep(1); } - cpu_callin_map[cpu] = 0; cpu_dead[cpu] = 0; } #endif + +/* Core99 Macs (dual G4s and G5s) */ +struct smp_ops_t core99_smp_ops = { + .message_pass = smp_mpic_message_pass, + .probe = smp_core99_probe, + .kick_cpu = smp_core99_kick_cpu, + .setup_cpu = smp_core99_setup_cpu, + .give_timebase = smp_core99_give_timebase, + .take_timebase = smp_core99_take_timebase, +#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32) + .cpu_disable = smp_core99_cpu_disable, + .cpu_die = smp_core99_cpu_die, +#endif +}; diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 2d57f58..e3fc340 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -21,15 +21,6 @@ config EEH depends on PPC_PSERIES default y if !EMBEDDED -config RTAS_PROC - bool "Proc interface to RTAS" - depends on PPC_RTAS - default y - -config RTAS_FLASH - tristate "Firmware flash interface" - depends on PPC64 && RTAS_PROC - config SCANLOG tristate "Scanlog dump interface" depends on RTAS_PROC && PPC_PSERIES diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 5ef494e..e7ca5b1 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -1,5 +1,7 @@ obj-y := pci.o lpar.o hvCall.o nvram.o reconfig.o \ - setup.o iommu.o rtas-fw.o ras.o + setup.o iommu.o ras.o rtasd.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_IBMVIO) += vio.o obj-$(CONFIG_XICS) += xics.o +obj-$(CONFIG_SCANLOG) += scanlog.o +obj-$(CONFIG_EEH) += eeh.o eeh_event.o diff --git a/arch/ppc64/kernel/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 035d1b1..79de231 100644 --- a/arch/ppc64/kernel/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -1,39 +1,37 @@ /* * eeh.c * Copyright (C) 2001 Dave Engebretsen & Todd Inglett IBM Corporation - * + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * + * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <linux/bootmem.h> +#include <linux/delay.h> #include <linux/init.h> #include <linux/list.h> -#include <linux/mm.h> -#include <linux/notifier.h> #include <linux/pci.h> #include <linux/proc_fs.h> #include <linux/rbtree.h> #include <linux/seq_file.h> #include <linux/spinlock.h> +#include <asm/atomic.h> #include <asm/eeh.h> +#include <asm/eeh_event.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/rtas.h> -#include <asm/atomic.h> -#include <asm/systemcfg.h> #include <asm/ppc-pci.h> +#include <asm/rtas.h> #undef DEBUG @@ -49,8 +47,8 @@ * were "empty": all reads return 0xff's and all writes are silently * ignored. EEH slot isolation events can be triggered by parity * errors on the address or data busses (e.g. during posted writes), - * which in turn might be caused by dust, vibration, humidity, - * radioactivity or plain-old failed hardware. + * which in turn might be caused by low voltage on the bus, dust, + * vibration, humidity, radioactivity or plain-old failed hardware. * * Note, however, that one of the leading causes of EEH slot * freeze events are buggy device drivers, buggy device microcode, @@ -71,26 +69,15 @@ * and sent out for processing. */ -/** Bus Unit ID macros; get low and hi 32-bits of the 64-bit BUID */ -#define BUID_HI(buid) ((buid) >> 32) -#define BUID_LO(buid) ((buid) & 0xffffffff) - -/* EEH event workqueue setup. */ -static DEFINE_SPINLOCK(eeh_eventlist_lock); -LIST_HEAD(eeh_eventlist); -static void eeh_event_handler(void *); -DECLARE_WORK(eeh_event_wq, eeh_event_handler, NULL); - -static struct notifier_block *eeh_notifier_chain; - -/* - * If a device driver keeps reading an MMIO register in an interrupt +/* If a device driver keeps reading an MMIO register in an interrupt * handler after a slot isolation event has occurred, we assume it * is broken and panic. This sets the threshold for how many read * attempts we allow before panicking. */ -#define EEH_MAX_FAILS 1000 -static atomic_t eeh_fail_count; +#define EEH_MAX_FAILS 100000 + +/* Misc forward declaraions */ +static void eeh_save_bars(struct pci_dev * pdev, struct pci_dn *pdn); /* RTAS tokens */ static int ibm_set_eeh_option; @@ -101,12 +88,19 @@ static int ibm_slot_error_detail; static int eeh_subsystem_enabled; +/* Lock to avoid races due to multiple reports of an error */ +static DEFINE_SPINLOCK(confirm_error_lock); + /* Buffer for reporting slot-error-detail rtas calls */ static unsigned char slot_errbuf[RTAS_ERROR_LOG_MAX]; static DEFINE_SPINLOCK(slot_errbuf_lock); static int eeh_error_buf_size; /* System monitoring statistics */ +static DEFINE_PER_CPU(unsigned long, no_device); +static DEFINE_PER_CPU(unsigned long, no_dn); +static DEFINE_PER_CPU(unsigned long, no_cfg_addr); +static DEFINE_PER_CPU(unsigned long, ignored_check); static DEFINE_PER_CPU(unsigned long, total_mmio_ffs); static DEFINE_PER_CPU(unsigned long, false_positives); static DEFINE_PER_CPU(unsigned long, ignored_failures); @@ -224,9 +218,9 @@ pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo, while (*p) { parent = *p; piar = rb_entry(parent, struct pci_io_addr_range, rb_node); - if (alo < piar->addr_lo) { + if (ahi < piar->addr_lo) { p = &parent->rb_left; - } else if (ahi > piar->addr_hi) { + } else if (alo > piar->addr_hi) { p = &parent->rb_right; } else { if (dev != piar->pcidev || @@ -245,6 +239,11 @@ pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo, piar->pcidev = dev; piar->flags = flags; +#ifdef DEBUG + printk(KERN_DEBUG "PIAR: insert range=[%lx:%lx] dev=%s\n", + alo, ahi, pci_name (dev)); +#endif + rb_link_node(&piar->rb_node, parent, p); rb_insert_color(&piar->rb_node, &pci_io_addr_cache_root.rb_root); @@ -260,18 +259,17 @@ static void __pci_addr_cache_insert_device(struct pci_dev *dev) dn = pci_device_to_OF_node(dev); if (!dn) { - printk(KERN_WARNING "PCI: no pci dn found for dev=%s\n", - pci_name(dev)); + printk(KERN_WARNING "PCI: no pci dn found for dev=%s\n", pci_name(dev)); return; } /* Skip any devices for which EEH is not enabled. */ - pdn = dn->data; + pdn = PCI_DN(dn); if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) || pdn->eeh_mode & EEH_MODE_NOCHECK) { #ifdef DEBUG - printk(KERN_INFO "PCI: skip building address cache for=%s\n", - pci_name(dev)); + printk(KERN_INFO "PCI: skip building address cache for=%s - %s\n", + pci_name(dev), pdn->node->full_name); #endif return; } @@ -307,7 +305,7 @@ static void __pci_addr_cache_insert_device(struct pci_dev *dev) * we maintain a cache of devices that can be quickly searched. * This routine adds a device to that cache. */ -void pci_addr_cache_insert_device(struct pci_dev *dev) +static void pci_addr_cache_insert_device(struct pci_dev *dev) { unsigned long flags; @@ -350,7 +348,7 @@ restart: * the tree multiple times (once per resource). * But so what; device removal doesn't need to be that fast. */ -void pci_addr_cache_remove_device(struct pci_dev *dev) +static void pci_addr_cache_remove_device(struct pci_dev *dev) { unsigned long flags; @@ -370,8 +368,12 @@ void pci_addr_cache_remove_device(struct pci_dev *dev) */ void __init pci_addr_cache_build(void) { + struct device_node *dn; struct pci_dev *dev = NULL; + if (!eeh_subsystem_enabled) + return; + spin_lock_init(&pci_io_addr_cache_root.piar_lock); while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { @@ -380,6 +382,10 @@ void __init pci_addr_cache_build(void) continue; } pci_addr_cache_insert_device(dev); + + /* Save the BAR's; firmware doesn't restore these after EEH reset */ + dn = pci_device_to_OF_node(dev); + eeh_save_bars(dev, PCI_DN(dn)); } #ifdef DEBUG @@ -391,22 +397,26 @@ void __init pci_addr_cache_build(void) /* --------------------------------------------------------------- */ /* Above lies the PCI Address Cache. Below lies the EEH event infrastructure */ -/** - * eeh_register_notifier - Register to find out about EEH events. - * @nb: notifier block to callback on events - */ -int eeh_register_notifier(struct notifier_block *nb) +void eeh_slot_error_detail (struct pci_dn *pdn, int severity) { - return notifier_chain_register(&eeh_notifier_chain, nb); -} + unsigned long flags; + int rc; -/** - * eeh_unregister_notifier - Unregister to an EEH event notifier. - * @nb: notifier block to callback on events - */ -int eeh_unregister_notifier(struct notifier_block *nb) -{ - return notifier_chain_unregister(&eeh_notifier_chain, nb); + /* Log the error with the rtas logger */ + spin_lock_irqsave(&slot_errbuf_lock, flags); + memset(slot_errbuf, 0, eeh_error_buf_size); + + rc = rtas_call(ibm_slot_error_detail, + 8, 1, NULL, pdn->eeh_config_addr, + BUID_HI(pdn->phb->buid), + BUID_LO(pdn->phb->buid), NULL, 0, + virt_to_phys(slot_errbuf), + eeh_error_buf_size, + severity); + + if (rc == 0) + log_error(slot_errbuf, ERR_TYPE_RTAS_LOG, 0); + spin_unlock_irqrestore(&slot_errbuf_lock, flags); } /** @@ -414,16 +424,16 @@ int eeh_unregister_notifier(struct notifier_block *nb) * @dn: device node to read * @rets: array to return results in */ -static int read_slot_reset_state(struct device_node *dn, int rets[]) +static int read_slot_reset_state(struct pci_dn *pdn, int rets[]) { int token, outputs; - struct pci_dn *pdn = dn->data; if (ibm_read_slot_reset_state2 != RTAS_UNKNOWN_SERVICE) { token = ibm_read_slot_reset_state2; outputs = 4; } else { token = ibm_read_slot_reset_state; + rets[2] = 0; /* fake PE Unavailable info */ outputs = 3; } @@ -432,87 +442,84 @@ static int read_slot_reset_state(struct device_node *dn, int rets[]) } /** - * eeh_panic - call panic() for an eeh event that cannot be handled. - * The philosophy of this routine is that it is better to panic and - * halt the OS than it is to risk possible data corruption by - * oblivious device drivers that don't know better. - * - * @dev pci device that had an eeh event - * @reset_state current reset state of the device slot + * eeh_token_to_phys - convert EEH address token to phys address + * @token i/o token, should be address in the form 0xA.... */ -static void eeh_panic(struct pci_dev *dev, int reset_state) +static inline unsigned long eeh_token_to_phys(unsigned long token) { - /* - * XXX We should create a separate sysctl for this. - * - * Since the panic_on_oops sysctl is used to halt the system - * in light of potential corruption, we can use it here. - */ - if (panic_on_oops) - panic("EEH: MMIO failure (%d) on device:%s\n", reset_state, - pci_name(dev)); - else { - __get_cpu_var(ignored_failures)++; - printk(KERN_INFO "EEH: Ignored MMIO failure (%d) on device:%s\n", - reset_state, pci_name(dev)); - } + pte_t *ptep; + unsigned long pa; + + ptep = find_linux_pte(init_mm.pgd, token); + if (!ptep) + return token; + pa = pte_pfn(*ptep) << PAGE_SHIFT; + + return pa | (token & (PAGE_SIZE-1)); } -/** - * eeh_event_handler - dispatch EEH events. The detection of a frozen - * slot can occur inside an interrupt, where it can be hard to do - * anything about it. The goal of this routine is to pull these - * detection events out of the context of the interrupt handler, and - * re-dispatch them for processing at a later time in a normal context. - * - * @dummy - unused +/** + * Return the "partitionable endpoint" (pe) under which this device lies */ -static void eeh_event_handler(void *dummy) +static struct device_node * find_device_pe(struct device_node *dn) { - unsigned long flags; - struct eeh_event *event; - - while (1) { - spin_lock_irqsave(&eeh_eventlist_lock, flags); - event = NULL; - if (!list_empty(&eeh_eventlist)) { - event = list_entry(eeh_eventlist.next, struct eeh_event, list); - list_del(&event->list); - } - spin_unlock_irqrestore(&eeh_eventlist_lock, flags); - if (event == NULL) - break; - - printk(KERN_INFO "EEH: MMIO failure (%d), notifiying device " - "%s\n", event->reset_state, - pci_name(event->dev)); + while ((dn->parent) && PCI_DN(dn->parent) && + (PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) { + dn = dn->parent; + } + return dn; +} - atomic_set(&eeh_fail_count, 0); - notifier_call_chain (&eeh_notifier_chain, - EEH_NOTIFY_FREEZE, event); +/** Mark all devices that are peers of this device as failed. + * Mark the device driver too, so that it can see the failure + * immediately; this is critical, since some drivers poll + * status registers in interrupts ... If a driver is polling, + * and the slot is frozen, then the driver can deadlock in + * an interrupt context, which is bad. + */ - __get_cpu_var(slot_resets)++; +static void __eeh_mark_slot (struct device_node *dn, int mode_flag) +{ + while (dn) { + if (PCI_DN(dn)) { + PCI_DN(dn)->eeh_mode |= mode_flag; - pci_dev_put(event->dev); - kfree(event); + if (dn->child) + __eeh_mark_slot (dn->child, mode_flag); + } + dn = dn->sibling; } } -/** - * eeh_token_to_phys - convert EEH address token to phys address - * @token i/o token, should be address in the form 0xE.... - */ -static inline unsigned long eeh_token_to_phys(unsigned long token) +void eeh_mark_slot (struct device_node *dn, int mode_flag) { - pte_t *ptep; - unsigned long pa; + dn = find_device_pe (dn); + PCI_DN(dn)->eeh_mode |= mode_flag; + __eeh_mark_slot (dn->child, mode_flag); +} - ptep = find_linux_pte(init_mm.pgd, token); - if (!ptep) - return token; - pa = pte_pfn(*ptep) << PAGE_SHIFT; +static void __eeh_clear_slot (struct device_node *dn, int mode_flag) +{ + while (dn) { + if (PCI_DN(dn)) { + PCI_DN(dn)->eeh_mode &= ~mode_flag; + PCI_DN(dn)->eeh_check_count = 0; + if (dn->child) + __eeh_clear_slot (dn->child, mode_flag); + } + dn = dn->sibling; + } +} - return pa | (token & (PAGE_SIZE-1)); +void eeh_clear_slot (struct device_node *dn, int mode_flag) +{ + unsigned long flags; + spin_lock_irqsave(&confirm_error_lock, flags); + dn = find_device_pe (dn); + PCI_DN(dn)->eeh_mode &= ~mode_flag; + PCI_DN(dn)->eeh_check_count = 0; + __eeh_clear_slot (dn->child, mode_flag); + spin_unlock_irqrestore(&confirm_error_lock, flags); } /** @@ -526,7 +533,7 @@ static inline unsigned long eeh_token_to_phys(unsigned long token) * will query firmware for the EEH status. * * Returns 0 if there has not been an EEH error; otherwise returns - * a non-zero value and queues up a solt isolation event notification. + * a non-zero value and queues up a slot isolation event notification. * * It is safe to call this routine in an interrupt context. */ @@ -535,42 +542,59 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) int ret; int rets[3]; unsigned long flags; - int rc, reset_state; - struct eeh_event *event; struct pci_dn *pdn; + int rc = 0; __get_cpu_var(total_mmio_ffs)++; if (!eeh_subsystem_enabled) return 0; - if (!dn) + if (!dn) { + __get_cpu_var(no_dn)++; return 0; - pdn = dn->data; + } + pdn = PCI_DN(dn); /* Access to IO BARs might get this far and still not want checking. */ - if (!pdn->eeh_capable || !(pdn->eeh_mode & EEH_MODE_SUPPORTED) || + if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) || pdn->eeh_mode & EEH_MODE_NOCHECK) { + __get_cpu_var(ignored_check)++; +#ifdef DEBUG + printk ("EEH:ignored check (%x) for %s %s\n", + pdn->eeh_mode, pci_name (dev), dn->full_name); +#endif return 0; } if (!pdn->eeh_config_addr) { + __get_cpu_var(no_cfg_addr)++; return 0; } - /* - * If we already have a pending isolation event for this - * slot, we know it's bad already, we don't need to check... + /* If we already have a pending isolation event for this + * slot, we know it's bad already, we don't need to check. + * Do this checking under a lock; as multiple PCI devices + * in one slot might report errors simultaneously, and we + * only want one error recovery routine running. */ + spin_lock_irqsave(&confirm_error_lock, flags); + rc = 1; if (pdn->eeh_mode & EEH_MODE_ISOLATED) { - atomic_inc(&eeh_fail_count); - if (atomic_read(&eeh_fail_count) >= EEH_MAX_FAILS) { + pdn->eeh_check_count ++; + if (pdn->eeh_check_count >= EEH_MAX_FAILS) { + printk (KERN_ERR "EEH: Device driver ignored %d bad reads, panicing\n", + pdn->eeh_check_count); + dump_stack(); + /* re-read the slot reset state */ - if (read_slot_reset_state(dn, rets) != 0) + if (read_slot_reset_state(pdn, rets) != 0) rets[0] = -1; /* reset state unknown */ - eeh_panic(dev, rets[0]); + + /* If we are here, then we hit an infinite loop. Stop. */ + panic("EEH: MMIO halt (%d) on device:%s\n", rets[0], pci_name(dev)); } - return 0; + goto dn_unlock; } /* @@ -580,66 +604,69 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) * function zero of a multi-function device. * In any case they must share a common PHB. */ - ret = read_slot_reset_state(dn, rets); - if (!(ret == 0 && rets[1] == 1 && (rets[0] == 2 || rets[0] == 4))) { + ret = read_slot_reset_state(pdn, rets); + + /* If the call to firmware failed, punt */ + if (ret != 0) { + printk(KERN_WARNING "EEH: read_slot_reset_state() failed; rc=%d dn=%s\n", + ret, dn->full_name); __get_cpu_var(false_positives)++; - return 0; + rc = 0; + goto dn_unlock; } - /* prevent repeated reports of this failure */ - pdn->eeh_mode |= EEH_MODE_ISOLATED; - - reset_state = rets[0]; - - spin_lock_irqsave(&slot_errbuf_lock, flags); - memset(slot_errbuf, 0, eeh_error_buf_size); - - rc = rtas_call(ibm_slot_error_detail, - 8, 1, NULL, pdn->eeh_config_addr, - BUID_HI(pdn->phb->buid), - BUID_LO(pdn->phb->buid), NULL, 0, - virt_to_phys(slot_errbuf), - eeh_error_buf_size, - 1 /* Temporary Error */); - - if (rc == 0) - log_error(slot_errbuf, ERR_TYPE_RTAS_LOG, 0); - spin_unlock_irqrestore(&slot_errbuf_lock, flags); + /* If EEH is not supported on this device, punt. */ + if (rets[1] != 1) { + printk(KERN_WARNING "EEH: event on unsupported device, rc=%d dn=%s\n", + ret, dn->full_name); + __get_cpu_var(false_positives)++; + rc = 0; + goto dn_unlock; + } - printk(KERN_INFO "EEH: MMIO failure (%d) on device: %s %s\n", - rets[0], dn->name, dn->full_name); - event = kmalloc(sizeof(*event), GFP_ATOMIC); - if (event == NULL) { - eeh_panic(dev, reset_state); - return 1; - } + /* If not the kind of error we know about, punt. */ + if (rets[0] != 2 && rets[0] != 4 && rets[0] != 5) { + __get_cpu_var(false_positives)++; + rc = 0; + goto dn_unlock; + } - event->dev = dev; - event->dn = dn; - event->reset_state = reset_state; + /* Note that config-io to empty slots may fail; + * we recognize empty because they don't have children. */ + if ((rets[0] == 5) && (dn->child == NULL)) { + __get_cpu_var(false_positives)++; + rc = 0; + goto dn_unlock; + } - /* We may or may not be called in an interrupt context */ - spin_lock_irqsave(&eeh_eventlist_lock, flags); - list_add(&event->list, &eeh_eventlist); - spin_unlock_irqrestore(&eeh_eventlist_lock, flags); + __get_cpu_var(slot_resets)++; + + /* Avoid repeated reports of this failure, including problems + * with other functions on this device, and functions under + * bridges. */ + eeh_mark_slot (dn, EEH_MODE_ISOLATED); + spin_unlock_irqrestore(&confirm_error_lock, flags); + eeh_send_failure_event (dn, dev, rets[0], rets[2]); + /* Most EEH events are due to device driver bugs. Having * a stack trace will help the device-driver authors figure * out what happened. So print that out. */ - dump_stack(); - schedule_work(&eeh_event_wq); + if (rets[0] != 5) dump_stack(); + return 1; - return 0; +dn_unlock: + spin_unlock_irqrestore(&confirm_error_lock, flags); + return rc; } -EXPORT_SYMBOL(eeh_dn_check_failure); +EXPORT_SYMBOL_GPL(eeh_dn_check_failure); /** * eeh_check_failure - check if all 1's data is due to EEH slot freeze * @token i/o token, should be address in the form 0xA.... * @val value, should be all 1's (XXX why do we need this arg??) * - * Check for an eeh failure at the given token address. * Check for an EEH failure at the given token address. Call this * routine if the result of a read was all 0xff's and you want to * find out if this is due to an EEH slot freeze event. This routine @@ -656,8 +683,10 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon /* Finding the phys addr + pci device; this is pretty quick. */ addr = eeh_token_to_phys((unsigned long __force) token); dev = pci_get_device_by_addr(addr); - if (!dev) + if (!dev) { + __get_cpu_var(no_device)++; return val; + } dn = pci_device_to_OF_node(dev); eeh_dn_check_failure (dn, dev); @@ -668,6 +697,217 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon EXPORT_SYMBOL(eeh_check_failure); +/* ------------------------------------------------------------- */ +/* The code below deals with error recovery */ + +/** Return negative value if a permanent error, else return + * a number of milliseconds to wait until the PCI slot is + * ready to be used. + */ +static int +eeh_slot_availability(struct pci_dn *pdn) +{ + int rc; + int rets[3]; + + rc = read_slot_reset_state(pdn, rets); + + if (rc) return rc; + + if (rets[1] == 0) return -1; /* EEH is not supported */ + if (rets[0] == 0) return 0; /* Oll Korrect */ + if (rets[0] == 5) { + if (rets[2] == 0) return -1; /* permanently unavailable */ + return rets[2]; /* number of millisecs to wait */ + } + return -1; +} + +/** rtas_pci_slot_reset raises/lowers the pci #RST line + * state: 1/0 to raise/lower the #RST + * + * Clear the EEH-frozen condition on a slot. This routine + * asserts the PCI #RST line if the 'state' argument is '1', + * and drops the #RST line if 'state is '0'. This routine is + * safe to call in an interrupt context. + * + */ + +static void +rtas_pci_slot_reset(struct pci_dn *pdn, int state) +{ + int rc; + + BUG_ON (pdn==NULL); + + if (!pdn->phb) { + printk (KERN_WARNING "EEH: in slot reset, device node %s has no phb\n", + pdn->node->full_name); + return; + } + + rc = rtas_call(ibm_set_slot_reset,4,1, NULL, + pdn->eeh_config_addr, + BUID_HI(pdn->phb->buid), + BUID_LO(pdn->phb->buid), + state); + if (rc) { + printk (KERN_WARNING "EEH: Unable to reset the failed slot, (%d) #RST=%d dn=%s\n", + rc, state, pdn->node->full_name); + return; + } +} + +/** rtas_set_slot_reset -- assert the pci #RST line for 1/4 second + * dn -- device node to be reset. + */ + +void +rtas_set_slot_reset(struct pci_dn *pdn) +{ + int i, rc; + + rtas_pci_slot_reset (pdn, 1); + + /* The PCI bus requires that the reset be held high for at least + * a 100 milliseconds. We wait a bit longer 'just in case'. */ + +#define PCI_BUS_RST_HOLD_TIME_MSEC 250 + msleep (PCI_BUS_RST_HOLD_TIME_MSEC); + + /* We might get hit with another EEH freeze as soon as the + * pci slot reset line is dropped. Make sure we don't miss + * these, and clear the flag now. */ + eeh_clear_slot (pdn->node, EEH_MODE_ISOLATED); + + rtas_pci_slot_reset (pdn, 0); + + /* After a PCI slot has been reset, the PCI Express spec requires + * a 1.5 second idle time for the bus to stabilize, before starting + * up traffic. */ +#define PCI_BUS_SETTLE_TIME_MSEC 1800 + msleep (PCI_BUS_SETTLE_TIME_MSEC); + + /* Now double check with the firmware to make sure the device is + * ready to be used; if not, wait for recovery. */ + for (i=0; i<10; i++) { + rc = eeh_slot_availability (pdn); + if (rc <= 0) break; + + msleep (rc+100); + } +} + +/* ------------------------------------------------------- */ +/** Save and restore of PCI BARs + * + * Although firmware will set up BARs during boot, it doesn't + * set up device BAR's after a device reset, although it will, + * if requested, set up bridge configuration. Thus, we need to + * configure the PCI devices ourselves. + */ + +/** + * __restore_bars - Restore the Base Address Registers + * Loads the PCI configuration space base address registers, + * the expansion ROM base address, the latency timer, and etc. + * from the saved values in the device node. + */ +static inline void __restore_bars (struct pci_dn *pdn) +{ + int i; + + if (NULL==pdn->phb) return; + for (i=4; i<10; i++) { + rtas_write_config(pdn, i*4, 4, pdn->config_space[i]); + } + + /* 12 == Expansion ROM Address */ + rtas_write_config(pdn, 12*4, 4, pdn->config_space[12]); + +#define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF)) +#define SAVED_BYTE(OFF) (((u8 *)(pdn->config_space))[BYTE_SWAP(OFF)]) + + rtas_write_config (pdn, PCI_CACHE_LINE_SIZE, 1, + SAVED_BYTE(PCI_CACHE_LINE_SIZE)); + + rtas_write_config (pdn, PCI_LATENCY_TIMER, 1, + SAVED_BYTE(PCI_LATENCY_TIMER)); + + /* max latency, min grant, interrupt pin and line */ + rtas_write_config(pdn, 15*4, 4, pdn->config_space[15]); +} + +/** + * eeh_restore_bars - restore the PCI config space info + * + * This routine performs a recursive walk to the children + * of this device as well. + */ +void eeh_restore_bars(struct pci_dn *pdn) +{ + struct device_node *dn; + if (!pdn) + return; + + if (! pdn->eeh_is_bridge) + __restore_bars (pdn); + + dn = pdn->node->child; + while (dn) { + eeh_restore_bars (PCI_DN(dn)); + dn = dn->sibling; + } +} + +/** + * eeh_save_bars - save device bars + * + * Save the values of the device bars. Unlike the restore + * routine, this routine is *not* recursive. This is because + * PCI devices are added individuallly; but, for the restore, + * an entire slot is reset at a time. + */ +static void eeh_save_bars(struct pci_dev * pdev, struct pci_dn *pdn) +{ + int i; + + if (!pdev || !pdn ) + return; + + for (i = 0; i < 16; i++) + pci_read_config_dword(pdev, i * 4, &pdn->config_space[i]); + + if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE) + pdn->eeh_is_bridge = 1; +} + +void +rtas_configure_bridge(struct pci_dn *pdn) +{ + int token = rtas_token ("ibm,configure-bridge"); + int rc; + + if (token == RTAS_UNKNOWN_SERVICE) + return; + rc = rtas_call(token,3,1, NULL, + pdn->eeh_config_addr, + BUID_HI(pdn->phb->buid), + BUID_LO(pdn->phb->buid)); + if (rc) { + printk (KERN_WARNING "EEH: Unable to configure device bridge (%d) for %s\n", + rc, pdn->node->full_name); + } +} + +/* ------------------------------------------------------------- */ +/* The code below deals with enabling EEH for devices during the + * early boot sequence. EEH must be enabled before any PCI probing + * can be done. + */ + +#define EEH_ENABLE 1 + struct eeh_early_enable_info { unsigned int buid_hi; unsigned int buid_lo; @@ -684,9 +924,11 @@ static void *early_enable_eeh(struct device_node *dn, void *data) u32 *device_id = (u32 *)get_property(dn, "device-id", NULL); u32 *regs; int enable; - struct pci_dn *pdn = dn->data; + struct pci_dn *pdn = PCI_DN(dn); pdn->eeh_mode = 0; + pdn->eeh_check_count = 0; + pdn->eeh_freeze_count = 0; if (status && strcmp(status, "ok") != 0) return NULL; /* ignore devices with bad status */ @@ -723,8 +965,9 @@ static void *early_enable_eeh(struct device_node *dn, void *data) /* First register entry is addr (00BBSS00) */ /* Try to enable eeh */ ret = rtas_call(ibm_set_eeh_option, 4, 1, NULL, - regs[0], info->buid_hi, info->buid_lo, - EEH_ENABLE); + regs[0], info->buid_hi, info->buid_lo, + EEH_ENABLE); + if (ret == 0) { eeh_subsystem_enabled = 1; pdn->eeh_mode |= EEH_MODE_SUPPORTED; @@ -736,7 +979,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data) /* This device doesn't support EEH, but it may have an * EEH parent, in which case we mark it as supported. */ - if (dn->parent && dn->parent->data + if (dn->parent && PCI_DN(dn->parent) && (PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) { /* Parent supports EEH. */ pdn->eeh_mode |= EEH_MODE_SUPPORTED; @@ -749,7 +992,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data) dn->full_name); } - return NULL; + return NULL; } /* @@ -770,6 +1013,9 @@ void __init eeh_init(void) struct device_node *phb, *np; struct eeh_early_enable_info info; + spin_lock_init(&confirm_error_lock); + spin_lock_init(&slot_errbuf_lock); + np = of_find_node_by_path("/rtas"); if (np == NULL) return; @@ -797,13 +1043,11 @@ void __init eeh_init(void) for (phb = of_find_node_by_name(NULL, "pci"); phb; phb = of_find_node_by_name(phb, "pci")) { unsigned long buid; - struct pci_dn *pci; buid = get_phb_buid(phb); - if (buid == 0 || phb->data == NULL) + if (buid == 0 || PCI_DN(phb) == NULL) continue; - pci = phb->data; info.buid_lo = BUID_LO(buid); info.buid_hi = BUID_HI(buid); traverse_pci_devices(phb, early_enable_eeh, &info); @@ -832,11 +1076,13 @@ void eeh_add_device_early(struct device_node *dn) struct pci_controller *phb; struct eeh_early_enable_info info; - if (!dn || !dn->data) + if (!dn || !PCI_DN(dn)) return; phb = PCI_DN(dn)->phb; if (NULL == phb || 0 == phb->buid) { - printk(KERN_WARNING "EEH: Expected buid but found none\n"); + printk(KERN_WARNING "EEH: Expected buid but found none for %s\n", + dn->full_name); + dump_stack(); return; } @@ -844,7 +1090,7 @@ void eeh_add_device_early(struct device_node *dn) info.buid_lo = BUID_LO(phb->buid); early_enable_eeh(dn, &info); } -EXPORT_SYMBOL(eeh_add_device_early); +EXPORT_SYMBOL_GPL(eeh_add_device_early); /** * eeh_add_device_late - perform EEH initialization for the indicated pci device @@ -855,6 +1101,9 @@ EXPORT_SYMBOL(eeh_add_device_early); */ void eeh_add_device_late(struct pci_dev *dev) { + struct device_node *dn; + struct pci_dn *pdn; + if (!dev || !eeh_subsystem_enabled) return; @@ -862,9 +1111,15 @@ void eeh_add_device_late(struct pci_dev *dev) printk(KERN_DEBUG "EEH: adding device %s\n", pci_name(dev)); #endif + pci_dev_get (dev); + dn = pci_device_to_OF_node(dev); + pdn = PCI_DN(dn); + pdn->pcidev = dev; + pci_addr_cache_insert_device (dev); + eeh_save_bars(dev, pdn); } -EXPORT_SYMBOL(eeh_add_device_late); +EXPORT_SYMBOL_GPL(eeh_add_device_late); /** * eeh_remove_device - undo EEH setup for the indicated pci device @@ -875,6 +1130,7 @@ EXPORT_SYMBOL(eeh_add_device_late); */ void eeh_remove_device(struct pci_dev *dev) { + struct device_node *dn; if (!dev || !eeh_subsystem_enabled) return; @@ -883,20 +1139,29 @@ void eeh_remove_device(struct pci_dev *dev) printk(KERN_DEBUG "EEH: remove device %s\n", pci_name(dev)); #endif pci_addr_cache_remove_device(dev); + + dn = pci_device_to_OF_node(dev); + PCI_DN(dn)->pcidev = NULL; + pci_dev_put (dev); } -EXPORT_SYMBOL(eeh_remove_device); +EXPORT_SYMBOL_GPL(eeh_remove_device); static int proc_eeh_show(struct seq_file *m, void *v) { unsigned int cpu; unsigned long ffs = 0, positives = 0, failures = 0; unsigned long resets = 0; + unsigned long no_dev = 0, no_dn = 0, no_cfg = 0, no_check = 0; for_each_cpu(cpu) { ffs += per_cpu(total_mmio_ffs, cpu); positives += per_cpu(false_positives, cpu); failures += per_cpu(ignored_failures, cpu); resets += per_cpu(slot_resets, cpu); + no_dev += per_cpu(no_device, cpu); + no_dn += per_cpu(no_dn, cpu); + no_cfg += per_cpu(no_cfg_addr, cpu); + no_check += per_cpu(ignored_check, cpu); } if (0 == eeh_subsystem_enabled) { @@ -904,13 +1169,17 @@ static int proc_eeh_show(struct seq_file *m, void *v) seq_printf(m, "eeh_total_mmio_ffs=%ld\n", ffs); } else { seq_printf(m, "EEH Subsystem is enabled\n"); - seq_printf(m, "eeh_total_mmio_ffs=%ld\n" - "eeh_false_positives=%ld\n" - "eeh_ignored_failures=%ld\n" - "eeh_slot_resets=%ld\n" - "eeh_fail_count=%d\n", - ffs, positives, failures, resets, - eeh_fail_count.counter); + seq_printf(m, + "no device=%ld\n" + "no device node=%ld\n" + "no config address=%ld\n" + "check not wanted=%ld\n" + "eeh_total_mmio_ffs=%ld\n" + "eeh_false_positives=%ld\n" + "eeh_ignored_failures=%ld\n" + "eeh_slot_resets=%ld\n", + no_dev, no_dn, no_cfg, no_check, + ffs, positives, failures, resets); } return 0; @@ -932,7 +1201,7 @@ static int __init eeh_init_proc(void) { struct proc_dir_entry *e; - if (systemcfg->platform & PLATFORM_PSERIES) { + if (platform_is_pseries()) { e = create_proc_entry("ppc64/eeh", 0, NULL); if (e) e->proc_fops = &proc_eeh_operations; diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c new file mode 100644 index 0000000..9249733 --- /dev/null +++ b/arch/powerpc/platforms/pseries/eeh_event.c @@ -0,0 +1,155 @@ +/* + * eeh_event.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Copyright (c) 2005 Linas Vepstas <linas@linas.org> + */ + +#include <linux/list.h> +#include <linux/pci.h> +#include <asm/eeh_event.h> + +/** Overview: + * EEH error states may be detected within exception handlers; + * however, the recovery processing needs to occur asynchronously + * in a normal kernel context and not an interrupt context. + * This pair of routines creates an event and queues it onto a + * work-queue, where a worker thread can drive recovery. + */ + +/* EEH event workqueue setup. */ +static spinlock_t eeh_eventlist_lock = SPIN_LOCK_UNLOCKED; +LIST_HEAD(eeh_eventlist); +static void eeh_thread_launcher(void *); +DECLARE_WORK(eeh_event_wq, eeh_thread_launcher, NULL); + +/** + * eeh_panic - call panic() for an eeh event that cannot be handled. + * The philosophy of this routine is that it is better to panic and + * halt the OS than it is to risk possible data corruption by + * oblivious device drivers that don't know better. + * + * @dev pci device that had an eeh event + * @reset_state current reset state of the device slot + */ +static void eeh_panic(struct pci_dev *dev, int reset_state) +{ + /* + * Since the panic_on_oops sysctl is used to halt the system + * in light of potential corruption, we can use it here. + */ + if (panic_on_oops) { + panic("EEH: MMIO failure (%d) on device:%s\n", reset_state, + pci_name(dev)); + } + else { + printk(KERN_INFO "EEH: Ignored MMIO failure (%d) on device:%s\n", + reset_state, pci_name(dev)); + } +} + +/** + * eeh_event_handler - dispatch EEH events. The detection of a frozen + * slot can occur inside an interrupt, where it can be hard to do + * anything about it. The goal of this routine is to pull these + * detection events out of the context of the interrupt handler, and + * re-dispatch them for processing at a later time in a normal context. + * + * @dummy - unused + */ +static int eeh_event_handler(void * dummy) +{ + unsigned long flags; + struct eeh_event *event; + + daemonize ("eehd"); + + while (1) { + set_current_state(TASK_INTERRUPTIBLE); + + spin_lock_irqsave(&eeh_eventlist_lock, flags); + event = NULL; + if (!list_empty(&eeh_eventlist)) { + event = list_entry(eeh_eventlist.next, struct eeh_event, list); + list_del(&event->list); + } + spin_unlock_irqrestore(&eeh_eventlist_lock, flags); + if (event == NULL) + break; + + printk(KERN_INFO "EEH: Detected PCI bus error on device %s\n", + pci_name(event->dev)); + + eeh_panic (event->dev, event->state); + + kfree(event); + } + + return 0; +} + +/** + * eeh_thread_launcher + * + * @dummy - unused + */ +static void eeh_thread_launcher(void *dummy) +{ + if (kernel_thread(eeh_event_handler, NULL, CLONE_KERNEL) < 0) + printk(KERN_ERR "Failed to start EEH daemon\n"); +} + +/** + * eeh_send_failure_event - generate a PCI error event + * @dev pci device + * + * This routine can be called within an interrupt context; + * the actual event will be delivered in a normal context + * (from a workqueue). + */ +int eeh_send_failure_event (struct device_node *dn, + struct pci_dev *dev, + int state, + int time_unavail) +{ + unsigned long flags; + struct eeh_event *event; + + event = kmalloc(sizeof(*event), GFP_ATOMIC); + if (event == NULL) { + printk (KERN_ERR "EEH: out of memory, event not handled\n"); + return 1; + } + + if (dev) + pci_dev_get(dev); + + event->dn = dn; + event->dev = dev; + event->state = state; + event->time_unavail = time_unavail; + + /* We may or may not be called in an interrupt context */ + spin_lock_irqsave(&eeh_eventlist_lock, flags); + list_add(&event->list, &eeh_eventlist); + spin_unlock_irqrestore(&eeh_eventlist_lock, flags); + + schedule_work(&eeh_event_wq); + + return 0; +} + +/********************** END OF FILE ******************************/ diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index 9e90d4113..97ba521 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -37,17 +37,17 @@ #include <asm/io.h> #include <asm/prom.h> #include <asm/rtas.h> -#include <asm/ppcdebug.h> #include <asm/iommu.h> #include <asm/pci-bridge.h> #include <asm/machdep.h> #include <asm/abs_addr.h> -#include <asm/plpar_wrappers.h> #include <asm/pSeries_reconfig.h> -#include <asm/systemcfg.h> #include <asm/firmware.h> #include <asm/tce.h> #include <asm/ppc-pci.h> +#include <asm/udbg.h> + +#include "plpar_wrappers.h" #define DBG(fmt...) @@ -498,7 +498,7 @@ static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long acti switch (action) { case PSERIES_RECONFIG_REMOVE: - if (pci->iommu_table && + if (pci && pci->iommu_table && get_property(np, "ibm,dma-window", NULL)) iommu_free_table(np); break; @@ -581,7 +581,7 @@ void iommu_init_early_pSeries(void) return; } - if (systemcfg->platform & PLATFORM_LPAR) { + if (platform_is_lpar()) { if (firmware_has_feature(FW_FEATURE_MULTITCE)) { ppc_md.tce_build = tce_buildmulti_pSeriesLP; ppc_md.tce_free = tce_freemulti_pSeriesLP; diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 268d836..a50e5f3 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -19,7 +19,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define DEBUG +#undef DEBUG_LOW #include <linux/config.h> #include <linux/kernel.h> @@ -31,19 +31,21 @@ #include <asm/machdep.h> #include <asm/abs_addr.h> #include <asm/mmu_context.h> -#include <asm/ppcdebug.h> #include <asm/iommu.h> #include <asm/tlbflush.h> #include <asm/tlb.h> #include <asm/prom.h> #include <asm/abs_addr.h> #include <asm/cputable.h> -#include <asm/plpar_wrappers.h> +#include <asm/udbg.h> +#include <asm/smp.h> -#ifdef DEBUG -#define DBG(fmt...) udbg_printf(fmt) +#include "plpar_wrappers.h" + +#ifdef DEBUG_LOW +#define DBG_LOW(fmt...) do { udbg_printf(fmt); } while(0) #else -#define DBG(fmt...) +#define DBG_LOW(fmt...) do { } while(0) #endif /* in pSeries_hvCall.S */ @@ -260,27 +262,24 @@ out: void vpa_init(int cpu) { int hwcpu = get_hard_smp_processor_id(cpu); - unsigned long vpa = (unsigned long)&(paca[cpu].lppaca); + unsigned long vpa = __pa(&paca[cpu].lppaca); long ret; - unsigned long flags; - - /* Register the Virtual Processor Area (VPA) */ - flags = 1UL << (63 - 18); if (cpu_has_feature(CPU_FTR_ALTIVEC)) paca[cpu].lppaca.vmxregs_in_use = 1; - ret = register_vpa(flags, hwcpu, __pa(vpa)); + ret = register_vpa(hwcpu, vpa); if (ret) printk(KERN_ERR "WARNING: vpa_init: VPA registration for " "cpu %d (hw %d) of area %lx returns %ld\n", - cpu, hwcpu, __pa(vpa), ret); + cpu, hwcpu, vpa, ret); } long pSeries_lpar_hpte_insert(unsigned long hpte_group, - unsigned long va, unsigned long prpn, - unsigned long vflags, unsigned long rflags) + unsigned long va, unsigned long pa, + unsigned long rflags, unsigned long vflags, + int psize) { unsigned long lpar_rc; unsigned long flags; @@ -288,11 +287,28 @@ long pSeries_lpar_hpte_insert(unsigned long hpte_group, unsigned long hpte_v, hpte_r; unsigned long dummy0, dummy1; - hpte_v = ((va >> 23) << HPTE_V_AVPN_SHIFT) | vflags | HPTE_V_VALID; - if (vflags & HPTE_V_LARGE) - hpte_v &= ~(1UL << HPTE_V_AVPN_SHIFT); - - hpte_r = (prpn << HPTE_R_RPN_SHIFT) | rflags; + if (!(vflags & HPTE_V_BOLTED)) + DBG_LOW("hpte_insert(group=%lx, va=%016lx, pa=%016lx, " + "rflags=%lx, vflags=%lx, psize=%d)\n", + hpte_group, va, pa, rflags, vflags, psize); + + hpte_v = hpte_encode_v(va, psize) | vflags | HPTE_V_VALID; + hpte_r = hpte_encode_r(pa, psize) | rflags; + + if (!(vflags & HPTE_V_BOLTED)) + DBG_LOW(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r); + +#if 1 + { + int i; + for (i=0;i<8;i++) { + unsigned long w0, w1; + plpar_pte_read(0, hpte_group, &w0, &w1); + BUG_ON (HPTE_V_COMPARE(hpte_v, w0) + && (w0 & HPTE_V_VALID)); + } + } +#endif /* Now fill in the actual HPTE */ /* Set CEC cookie to 0 */ @@ -302,23 +318,30 @@ long pSeries_lpar_hpte_insert(unsigned long hpte_group, /* Exact = 0 */ flags = 0; - /* XXX why is this here? - Anton */ + /* Make pHyp happy */ if (rflags & (_PAGE_GUARDED|_PAGE_NO_CACHE)) hpte_r &= ~_PAGE_COHERENT; lpar_rc = plpar_hcall(H_ENTER, flags, hpte_group, hpte_v, hpte_r, &slot, &dummy0, &dummy1); - - if (unlikely(lpar_rc == H_PTEG_Full)) + if (unlikely(lpar_rc == H_PTEG_Full)) { + if (!(vflags & HPTE_V_BOLTED)) + DBG_LOW(" full\n"); return -1; + } /* * Since we try and ioremap PHBs we don't own, the pte insert * will fail. However we must catch the failure in hash_page * or we will loop forever, so return -2 in this case. */ - if (unlikely(lpar_rc != H_Success)) + if (unlikely(lpar_rc != H_Success)) { + if (!(vflags & HPTE_V_BOLTED)) + DBG_LOW(" lpar err %d\n", lpar_rc); return -2; + } + if (!(vflags & HPTE_V_BOLTED)) + DBG_LOW(" -> slot: %d\n", slot & 7); /* Because of iSeries, we have to pass down the secondary * bucket bit here as well @@ -343,10 +366,8 @@ static long pSeries_lpar_hpte_remove(unsigned long hpte_group) /* don't remove a bolted entry */ lpar_rc = plpar_pte_remove(H_ANDCOND, hpte_group + slot_offset, (0x1UL << 4), &dummy1, &dummy2); - if (lpar_rc == H_Success) return i; - BUG_ON(lpar_rc != H_Not_Found); slot_offset++; @@ -374,20 +395,28 @@ static void pSeries_lpar_hptab_clear(void) * We can probably optimize here and assume the high bits of newpp are * already zero. For now I am paranoid. */ -static long pSeries_lpar_hpte_updatepp(unsigned long slot, unsigned long newpp, - unsigned long va, int large, int local) +static long pSeries_lpar_hpte_updatepp(unsigned long slot, + unsigned long newpp, + unsigned long va, + int psize, int local) { unsigned long lpar_rc; unsigned long flags = (newpp & 7) | H_AVPN; - unsigned long avpn = va >> 23; + unsigned long want_v; - if (large) - avpn &= ~0x1UL; + want_v = hpte_encode_v(va, psize); - lpar_rc = plpar_pte_protect(flags, slot, (avpn << 7)); + DBG_LOW(" update: avpnv=%016lx, hash=%016lx, f=%x, psize: %d ... ", + want_v & HPTE_V_AVPN, slot, flags, psize); - if (lpar_rc == H_Not_Found) + lpar_rc = plpar_pte_protect(flags, slot, want_v & HPTE_V_AVPN); + + if (lpar_rc == H_Not_Found) { + DBG_LOW("not found !\n"); return -1; + } + + DBG_LOW("ok\n"); BUG_ON(lpar_rc != H_Success); @@ -413,21 +442,22 @@ static unsigned long pSeries_lpar_hpte_getword0(unsigned long slot) return dword0; } -static long pSeries_lpar_hpte_find(unsigned long vpn) +static long pSeries_lpar_hpte_find(unsigned long va, int psize) { unsigned long hash; unsigned long i, j; long slot; - unsigned long hpte_v; + unsigned long want_v, hpte_v; - hash = hpt_hash(vpn, 0); + hash = hpt_hash(va, mmu_psize_defs[psize].shift); + want_v = hpte_encode_v(va, psize); for (j = 0; j < 2; j++) { slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; for (i = 0; i < HPTES_PER_GROUP; i++) { hpte_v = pSeries_lpar_hpte_getword0(slot); - if ((HPTE_V_AVPN_VAL(hpte_v) == (vpn >> 11)) + if (HPTE_V_COMPARE(hpte_v, want_v) && (hpte_v & HPTE_V_VALID) && (!!(hpte_v & HPTE_V_SECONDARY) == j)) { /* HPTE matches */ @@ -444,17 +474,15 @@ static long pSeries_lpar_hpte_find(unsigned long vpn) } static void pSeries_lpar_hpte_updateboltedpp(unsigned long newpp, - unsigned long ea) + unsigned long ea, + int psize) { - unsigned long lpar_rc; - unsigned long vsid, va, vpn, flags; - long slot; + unsigned long lpar_rc, slot, vsid, va, flags; vsid = get_kernel_vsid(ea); va = (vsid << 28) | (ea & 0x0fffffff); - vpn = va >> PAGE_SHIFT; - slot = pSeries_lpar_hpte_find(vpn); + slot = pSeries_lpar_hpte_find(va, psize); BUG_ON(slot == -1); flags = newpp & 7; @@ -464,18 +492,18 @@ static void pSeries_lpar_hpte_updateboltedpp(unsigned long newpp, } static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va, - int large, int local) + int psize, int local) { - unsigned long avpn = va >> 23; + unsigned long want_v; unsigned long lpar_rc; unsigned long dummy1, dummy2; - if (large) - avpn &= ~0x1UL; - - lpar_rc = plpar_pte_remove(H_AVPN, slot, (avpn << 7), &dummy1, - &dummy2); + DBG_LOW(" inval : slot=%lx, va=%016lx, psize: %d, local: %d", + slot, va, psize, local); + want_v = hpte_encode_v(va, psize); + lpar_rc = plpar_pte_remove(H_AVPN, slot, want_v & HPTE_V_AVPN, + &dummy1, &dummy2); if (lpar_rc == H_Not_Found) return; @@ -497,7 +525,8 @@ void pSeries_lpar_flush_hash_range(unsigned long number, int local) spin_lock_irqsave(&pSeries_lpar_tlbie_lock, flags); for (i = 0; i < number; i++) - flush_hash_page(batch->vaddr[i], batch->pte[i], local); + flush_hash_page(batch->vaddr[i], batch->pte[i], + batch->psize, local); if (lock_tlbie) spin_unlock_irqrestore(&pSeries_lpar_tlbie_lock, flags); diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c index c198656..999a962 100644 --- a/arch/powerpc/platforms/pseries/pci.c +++ b/arch/powerpc/platforms/pseries/pci.c @@ -107,7 +107,6 @@ static void __init pSeries_request_regions(void) void __init pSeries_final_fixup(void) { - phbs_remap_io(); pSeries_request_regions(); pci_addr_cache_build(); @@ -123,7 +122,7 @@ static void fixup_winbond_82c105(struct pci_dev* dev) int i; unsigned int reg; - if (!(systemcfg->platform & PLATFORM_PSERIES)) + if (!platform_is_pseries()) return; printk("Using INTC for W82c105 IDE controller.\n"); diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h new file mode 100644 index 0000000..3bd1b3e --- /dev/null +++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h @@ -0,0 +1,110 @@ +#ifndef _PSERIES_PLPAR_WRAPPERS_H +#define _PSERIES_PLPAR_WRAPPERS_H + +#include <asm/hvcall.h> + +static inline long poll_pending(void) +{ + unsigned long dummy; + return plpar_hcall(H_POLL_PENDING, 0, 0, 0, 0, &dummy, &dummy, &dummy); +} + +static inline long prod_processor(void) +{ + plpar_hcall_norets(H_PROD); + return 0; +} + +static inline long cede_processor(void) +{ + plpar_hcall_norets(H_CEDE); + return 0; +} + +static inline long vpa_call(unsigned long flags, unsigned long cpu, + unsigned long vpa) +{ + /* flags are in bits 16-18 (counting from most significant bit) */ + flags = flags << (63 - 18); + + return plpar_hcall_norets(H_REGISTER_VPA, flags, cpu, vpa); +} + +static inline long unregister_vpa(unsigned long cpu, unsigned long vpa) +{ + return vpa_call(0x5, cpu, vpa); +} + +static inline long register_vpa(unsigned long cpu, unsigned long vpa) +{ + return vpa_call(0x1, cpu, vpa); +} + +extern void vpa_init(int cpu); + +static inline long plpar_pte_remove(unsigned long flags, unsigned long ptex, + unsigned long avpn, unsigned long *old_pteh_ret, + unsigned long *old_ptel_ret) +{ + unsigned long dummy; + return plpar_hcall(H_REMOVE, flags, ptex, avpn, 0, old_pteh_ret, + old_ptel_ret, &dummy); +} + +static inline long plpar_pte_read(unsigned long flags, unsigned long ptex, + unsigned long *old_pteh_ret, unsigned long *old_ptel_ret) +{ + unsigned long dummy; + return plpar_hcall(H_READ, flags, ptex, 0, 0, old_pteh_ret, + old_ptel_ret, &dummy); +} + +static inline long plpar_pte_protect(unsigned long flags, unsigned long ptex, + unsigned long avpn) +{ + return plpar_hcall_norets(H_PROTECT, flags, ptex, avpn); +} + +static inline long plpar_tce_get(unsigned long liobn, unsigned long ioba, + unsigned long *tce_ret) +{ + unsigned long dummy; + return plpar_hcall(H_GET_TCE, liobn, ioba, 0, 0, tce_ret, &dummy, + &dummy); +} + +static inline long plpar_tce_put(unsigned long liobn, unsigned long ioba, + unsigned long tceval) +{ + return plpar_hcall_norets(H_PUT_TCE, liobn, ioba, tceval); +} + +static inline long plpar_tce_put_indirect(unsigned long liobn, + unsigned long ioba, unsigned long page, unsigned long count) +{ + return plpar_hcall_norets(H_PUT_TCE_INDIRECT, liobn, ioba, page, count); +} + +static inline long plpar_tce_stuff(unsigned long liobn, unsigned long ioba, + unsigned long tceval, unsigned long count) +{ + return plpar_hcall_norets(H_STUFF_TCE, liobn, ioba, tceval, count); +} + +static inline long plpar_get_term_char(unsigned long termno, + unsigned long *len_ret, char *buf_ret) +{ + unsigned long *lbuf = (unsigned long *)buf_ret; /* TODO: alignment? */ + return plpar_hcall(H_GET_TERM_CHAR, termno, 0, 0, 0, len_ret, + lbuf + 0, lbuf + 1); +} + +static inline long plpar_put_term_char(unsigned long termno, unsigned long len, + const char *buffer) +{ + unsigned long *lbuf = (unsigned long *)buffer; /* TODO: alignment? */ + return plpar_hcall_norets(H_PUT_TERM_CHAR, termno, len, lbuf[0], + lbuf[1]); +} + +#endif /* _PSERIES_PLPAR_WRAPPERS_H */ diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c index 6562ff4..fbd214d 100644 --- a/arch/powerpc/platforms/pseries/ras.c +++ b/arch/powerpc/platforms/pseries/ras.c @@ -48,7 +48,7 @@ #include <asm/ptrace.h> #include <asm/machdep.h> #include <asm/rtas.h> -#include <asm/ppcdebug.h> +#include <asm/udbg.h> static unsigned char ras_log_buf[RTAS_ERROR_LOG_MAX]; static DEFINE_SPINLOCK(ras_log_buf_lock); diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c index 58c6121..d886416 100644 --- a/arch/powerpc/platforms/pseries/reconfig.c +++ b/arch/powerpc/platforms/pseries/reconfig.c @@ -286,10 +286,8 @@ static struct property *new_property(const char *name, const int length, return new; cleanup: - if (new->name) - kfree(new->name); - if (new->value) - kfree(new->value); + kfree(new->name); + kfree(new->value); kfree(new); return NULL; } @@ -410,7 +408,7 @@ static int proc_ppc64_create_ofdt(void) { struct proc_dir_entry *ent; - if (!(systemcfg->platform & PLATFORM_PSERIES)) + if (!platform_is_pseries()) return 0; ent = create_proc_entry("ppc64/ofdt", S_IWUSR, NULL); diff --git a/arch/powerpc/platforms/pseries/rtas-fw.c b/arch/powerpc/platforms/pseries/rtas-fw.c deleted file mode 100644 index 15d81d7..0000000 --- a/arch/powerpc/platforms/pseries/rtas-fw.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - * - * Procedures for firmware flash updates on pSeries systems. - * - * Peter Bergner, IBM March 2001. - * Copyright (C) 2001 IBM. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <stdarg.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/spinlock.h> -#include <linux/module.h> -#include <linux/init.h> - -#include <asm/prom.h> -#include <asm/rtas.h> -#include <asm/semaphore.h> -#include <asm/machdep.h> -#include <asm/page.h> -#include <asm/param.h> -#include <asm/system.h> -#include <asm/abs_addr.h> -#include <asm/udbg.h> -#include <asm/delay.h> -#include <asm/uaccess.h> -#include <asm/systemcfg.h> - -#include "rtas-fw.h" - -struct flash_block_list_header rtas_firmware_flash_list = {0, NULL}; - -#define FLASH_BLOCK_LIST_VERSION (1UL) - -static void rtas_flash_firmware(void) -{ - unsigned long image_size; - struct flash_block_list *f, *next, *flist; - unsigned long rtas_block_list; - int i, status, update_token; - - update_token = rtas_token("ibm,update-flash-64-and-reboot"); - if (update_token == RTAS_UNKNOWN_SERVICE) { - printk(KERN_ALERT "FLASH: ibm,update-flash-64-and-reboot is not available -- not a service partition?\n"); - printk(KERN_ALERT "FLASH: firmware will not be flashed\n"); - return; - } - - /* NOTE: the "first" block list is a global var with no data - * blocks in the kernel data segment. We do this because - * we want to ensure this block_list addr is under 4GB. - */ - rtas_firmware_flash_list.num_blocks = 0; - flist = (struct flash_block_list *)&rtas_firmware_flash_list; - rtas_block_list = virt_to_abs(flist); - if (rtas_block_list >= 4UL*1024*1024*1024) { - printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n"); - return; - } - - printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n"); - /* Update the block_list in place. */ - image_size = 0; - for (f = flist; f; f = next) { - /* Translate data addrs to absolute */ - for (i = 0; i < f->num_blocks; i++) { - f->blocks[i].data = (char *)virt_to_abs(f->blocks[i].data); - image_size += f->blocks[i].length; - } - next = f->next; - /* Don't translate NULL pointer for last entry */ - if (f->next) - f->next = (struct flash_block_list *)virt_to_abs(f->next); - else - f->next = NULL; - /* make num_blocks into the version/length field */ - f->num_blocks = (FLASH_BLOCK_LIST_VERSION << 56) | ((f->num_blocks+1)*16); - } - - printk(KERN_ALERT "FLASH: flash image is %ld bytes\n", image_size); - printk(KERN_ALERT "FLASH: performing flash and reboot\n"); - rtas_progress("Flashing \n", 0x0); - rtas_progress("Please Wait... ", 0x0); - printk(KERN_ALERT "FLASH: this will take several minutes. Do not power off!\n"); - status = rtas_call(update_token, 1, 1, NULL, rtas_block_list); - switch (status) { /* should only get "bad" status */ - case 0: - printk(KERN_ALERT "FLASH: success\n"); - break; - case -1: - printk(KERN_ALERT "FLASH: hardware error. Firmware may not be not flashed\n"); - break; - case -3: - printk(KERN_ALERT "FLASH: image is corrupt or not correct for this platform. Firmware not flashed\n"); - break; - case -4: - printk(KERN_ALERT "FLASH: flash failed when partially complete. System may not reboot\n"); - break; - default: - printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status); - break; - } -} - -void rtas_flash_bypass_warning(void) -{ - printk(KERN_ALERT "FLASH: firmware flash requires a reboot\n"); - printk(KERN_ALERT "FLASH: the firmware image will NOT be flashed\n"); -} - - -void rtas_fw_restart(char *cmd) -{ - if (rtas_firmware_flash_list.next) - rtas_flash_firmware(); - rtas_restart(cmd); -} - -void rtas_fw_power_off(void) -{ - if (rtas_firmware_flash_list.next) - rtas_flash_bypass_warning(); - rtas_power_off(); -} - -void rtas_fw_halt(void) -{ - if (rtas_firmware_flash_list.next) - rtas_flash_bypass_warning(); - rtas_halt(); -} - -EXPORT_SYMBOL(rtas_firmware_flash_list); diff --git a/arch/powerpc/platforms/pseries/rtas-fw.h b/arch/powerpc/platforms/pseries/rtas-fw.h deleted file mode 100644 index e70fa69..0000000 --- a/arch/powerpc/platforms/pseries/rtas-fw.h +++ /dev/null @@ -1,3 +0,0 @@ -void rtas_fw_restart(char *cmd); -void rtas_fw_power_off(void); -void rtas_fw_halt(void); diff --git a/arch/ppc64/kernel/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c index e26b042..00cf331 100644 --- a/arch/ppc64/kernel/rtasd.c +++ b/arch/powerpc/platforms/pseries/rtasd.c @@ -482,10 +482,12 @@ static int __init rtas_init(void) { struct proc_dir_entry *entry; - /* No RTAS, only warn if we are on a pSeries box */ + if (!platform_is_pseries()) + return 0; + + /* No RTAS */ if (rtas_token("event-scan") == RTAS_UNKNOWN_SERVICE) { - if (systemcfg->platform & PLATFORM_PSERIES) - printk(KERN_INFO "rtasd: no event-scan on system\n"); + printk(KERN_INFO "rtasd: no event-scan on system\n"); return 1; } diff --git a/arch/ppc64/kernel/scanlog.c b/arch/powerpc/platforms/pseries/scanlog.c index 215bf89..2edc947 100644 --- a/arch/ppc64/kernel/scanlog.c +++ b/arch/powerpc/platforms/pseries/scanlog.c @@ -225,8 +225,7 @@ int __init scanlog_init(void) void __exit scanlog_cleanup(void) { if (proc_ppc64_scan_log_dump) { - if (proc_ppc64_scan_log_dump->data) - kfree(proc_ppc64_scan_log_dump->data); + kfree(proc_ppc64_scan_log_dump->data); remove_proc_entry("scan-log-dump", proc_ppc64_scan_log_dump->parent); } } diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 10cb0f2..e94247c 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -58,7 +58,6 @@ #include <asm/irq.h> #include <asm/time.h> #include <asm/nvram.h> -#include <asm/plpar_wrappers.h> #include "xics.h" #include <asm/firmware.h> #include <asm/pmc.h> @@ -66,8 +65,9 @@ #include <asm/ppc-pci.h> #include <asm/i8259.h> #include <asm/udbg.h> +#include <asm/smp.h> -#include "rtas-fw.h" +#include "plpar_wrappers.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -249,7 +249,7 @@ static void __init pSeries_setup_arch(void) ppc_md.idle_loop = default_idle; } - if (systemcfg->platform & PLATFORM_LPAR) + if (platform_is_lpar()) ppc_md.enable_pmcs = pseries_lpar_enable_pmcs; else ppc_md.enable_pmcs = power4_enable_pmcs; @@ -352,6 +352,17 @@ static void pSeries_mach_cpu_die(void) for(;;); } +static int pseries_set_dabr(unsigned long dabr) +{ + return plpar_hcall_norets(H_SET_DABR, dabr); +} + +static int pseries_set_xdabr(unsigned long dabr) +{ + /* We want to catch accesses from kernel and userspace */ + return plpar_hcall_norets(H_SET_XDABR, dabr, + H_DABRX_KERNEL | H_DABRX_USER); +} /* * Early initialization. Relocation is on but do not reference unbolted pages @@ -367,7 +378,7 @@ static void __init pSeries_init_early(void) fw_feature_init(); - if (systemcfg->platform & PLATFORM_LPAR) + if (platform_is_lpar()) hpte_init_lpar(); else { hpte_init_native(); @@ -377,7 +388,7 @@ static void __init pSeries_init_early(void) generic_find_legacy_serial_ports(&physport, &default_speed); - if (systemcfg->platform & PLATFORM_LPAR) + if (platform_is_lpar()) find_udbg_vterm(); else if (physport) { /* Map the uart for udbg. */ @@ -387,6 +398,10 @@ static void __init pSeries_init_early(void) DBG("Hello World !\n"); } + if (firmware_has_feature(FW_FEATURE_DABR)) + ppc_md.set_dabr = pseries_set_dabr; + else if (firmware_has_feature(FW_FEATURE_XDABR)) + ppc_md.set_dabr = pseries_set_xdabr; iommu_init_early_pSeries(); @@ -454,6 +469,7 @@ static inline void dedicated_idle_sleep(unsigned int cpu) * more. */ clear_thread_flag(TIF_POLLING_NRFLAG); + smp_mb__after_clear_bit(); /* * SMT dynamic mode. Cede will result in this thread going @@ -466,6 +482,7 @@ static inline void dedicated_idle_sleep(unsigned int cpu) cede_processor(); else local_irq_enable(); + set_thread_flag(TIF_POLLING_NRFLAG); } else { /* * Give the HV an opportunity at the processor, since we are @@ -477,11 +494,11 @@ static inline void dedicated_idle_sleep(unsigned int cpu) static void pseries_dedicated_idle(void) { - long oldval; struct paca_struct *lpaca = get_paca(); unsigned int cpu = smp_processor_id(); unsigned long start_snooze; unsigned long *smt_snooze_delay = &__get_cpu_var(smt_snooze_delay); + set_thread_flag(TIF_POLLING_NRFLAG); while (1) { /* @@ -490,10 +507,7 @@ static void pseries_dedicated_idle(void) */ lpaca->lppaca.idle = 1; - oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); - if (!oldval) { - set_thread_flag(TIF_POLLING_NRFLAG); - + if (!need_resched()) { start_snooze = __get_tb() + *smt_snooze_delay * tb_ticks_per_usec; @@ -516,15 +530,14 @@ static void pseries_dedicated_idle(void) } HMT_medium(); - clear_thread_flag(TIF_POLLING_NRFLAG); - } else { - set_need_resched(); } lpaca->lppaca.idle = 0; ppc64_runlatch_on(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) cpu_die(); @@ -568,7 +581,9 @@ static void pseries_shared_idle(void) lpaca->lppaca.idle = 0; ppc64_runlatch_on(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) cpu_die(); @@ -577,7 +592,7 @@ static void pseries_shared_idle(void) static int pSeries_pci_probe_mode(struct pci_bus *bus) { - if (systemcfg->platform & PLATFORM_LPAR) + if (platform_is_lpar()) return PCI_PROBE_DEVTREE; return PCI_PROBE_NORMAL; } @@ -591,9 +606,9 @@ struct machdep_calls __initdata pSeries_md = { .pcibios_fixup = pSeries_final_fixup, .pci_probe_mode = pSeries_pci_probe_mode, .irq_bus_setup = pSeries_irq_bus_setup, - .restart = rtas_fw_restart, - .power_off = rtas_fw_power_off, - .halt = rtas_fw_halt, + .restart = rtas_restart, + .power_off = rtas_power_off, + .halt = rtas_halt, .panic = rtas_os_term, .cpu_die = pSeries_mach_cpu_die, .get_boot_time = rtas_get_boot_time, diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 9c9458d..3ba794c 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -44,9 +44,11 @@ #include <asm/firmware.h> #include <asm/system.h> #include <asm/rtas.h> -#include <asm/plpar_wrappers.h> #include <asm/pSeries_reconfig.h> #include <asm/mpic.h> +#include <asm/systemcfg.h> + +#include "plpar_wrappers.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -95,7 +97,7 @@ int pSeries_cpu_disable(void) int cpu = smp_processor_id(); cpu_clear(cpu, cpu_online_map); - systemcfg->processorCount--; + _systemcfg->processorCount--; /*fix boot_cpuid here*/ if (cpu == boot_cpuid) @@ -440,7 +442,7 @@ void __init smp_init_pSeries(void) smp_ops->cpu_die = pSeries_cpu_die; /* Processors can be added/removed only on LPAR */ - if (systemcfg->platform == PLATFORM_PSERIES_LPAR) + if (platform_is_lpar()) pSeries_reconfig_notifier_register(&pSeries_smp_nb); #endif diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index c72c86f..72ac180 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -545,7 +545,9 @@ nextnode: of_node_put(np); } - if (systemcfg->platform == PLATFORM_PSERIES) { + if (platform_is_lpar()) + ops = &pSeriesLP_ops; + else { #ifdef CONFIG_SMP for_each_cpu(i) { int hard_id; @@ -561,12 +563,11 @@ nextnode: #else xics_per_cpu[0] = ioremap(intr_base, intr_size); #endif /* CONFIG_SMP */ - } else if (systemcfg->platform == PLATFORM_PSERIES_LPAR) { - ops = &pSeriesLP_ops; } xics_8259_pic.enable = i8259_pic.enable; xics_8259_pic.disable = i8259_pic.disable; + xics_8259_pic.end = i8259_pic.end; for (i = 0; i < 16; ++i) get_irq_desc(i)->handler = &xics_8259_pic; for (; i < NR_IRQS; ++i) diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 8acd21d..6b7efcfc 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_PPC_MPC106) += grackle.o obj-$(CONFIG_BOOKE) += dcr.o obj-$(CONFIG_40x) += dcr.o obj-$(CONFIG_U3_DART) += u3_iommu.o +obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o diff --git a/arch/powerpc/sysdev/dart.h b/arch/powerpc/sysdev/dart.h new file mode 100644 index 0000000..ea8f0d9 --- /dev/null +++ b/arch/powerpc/sysdev/dart.h @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2004 Olof Johansson <olof@austin.ibm.com>, IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _POWERPC_SYSDEV_DART_H +#define _POWERPC_SYSDEV_DART_H + + +/* physical base of DART registers */ +#define DART_BASE 0xf8033000UL + +/* Offset from base to control register */ +#define DARTCNTL 0 +/* Offset from base to exception register */ +#define DARTEXCP 0x10 +/* Offset from base to TLB tag registers */ +#define DARTTAG 0x1000 + + +/* Control Register fields */ + +/* base address of table (pfn) */ +#define DARTCNTL_BASE_MASK 0xfffff +#define DARTCNTL_BASE_SHIFT 12 + +#define DARTCNTL_FLUSHTLB 0x400 +#define DARTCNTL_ENABLE 0x200 + +/* size of table in pages */ +#define DARTCNTL_SIZE_MASK 0x1ff +#define DARTCNTL_SIZE_SHIFT 0 + + +/* DART table fields */ + +#define DARTMAP_VALID 0x80000000 +#define DARTMAP_RPNMASK 0x00ffffff + + +#define DART_PAGE_SHIFT 12 +#define DART_PAGE_SIZE (1 << DART_PAGE_SHIFT) +#define DART_PAGE_FACTOR (PAGE_SHIFT - DART_PAGE_SHIFT) + + +#endif /* _POWERPC_SYSDEV_DART_H */ diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c index 90bce6e..b7ac32f 100644 --- a/arch/powerpc/sysdev/i8259.c +++ b/arch/powerpc/sysdev/i8259.c @@ -207,6 +207,9 @@ void __init i8259_init(unsigned long intack_addr, int offset) spin_unlock_irqrestore(&i8259_lock, flags); + for (i = 0; i < NUM_ISA_INTERRUPTS; ++i) + irq_desc[offset + i].handler = &i8259_pic; + /* reserve our resources */ setup_irq(offset + 2, &i8259_irqaction); request_resource(&ioport_resource, &pic1_iores); @@ -216,6 +219,4 @@ void __init i8259_init(unsigned long intack_addr, int offset) if (intack_addr != 0) pci_intack = ioremap(intack_addr, 1); - for (i = 0; i < NUM_ISA_INTERRUPTS; ++i) - irq_desc[offset + i].handler = &i8259_pic; } diff --git a/arch/ppc64/kernel/bpa_nvram.c b/arch/powerpc/sysdev/mmio_nvram.c index 06a119c..74e0d31 100644 --- a/arch/ppc64/kernel/bpa_nvram.c +++ b/arch/powerpc/sysdev/mmio_nvram.c @@ -1,5 +1,5 @@ /* - * NVRAM for CPBW + * memory mapped NVRAM * * (C) Copyright IBM Corp. 2005 * @@ -30,54 +30,54 @@ #include <asm/nvram.h> #include <asm/prom.h> -static void __iomem *bpa_nvram_start; -static long bpa_nvram_len; -static spinlock_t bpa_nvram_lock = SPIN_LOCK_UNLOCKED; +static void __iomem *mmio_nvram_start; +static long mmio_nvram_len; +static spinlock_t mmio_nvram_lock = SPIN_LOCK_UNLOCKED; -static ssize_t bpa_nvram_read(char *buf, size_t count, loff_t *index) +static ssize_t mmio_nvram_read(char *buf, size_t count, loff_t *index) { unsigned long flags; - if (*index >= bpa_nvram_len) + if (*index >= mmio_nvram_len) return 0; - if (*index + count > bpa_nvram_len) - count = bpa_nvram_len - *index; + if (*index + count > mmio_nvram_len) + count = mmio_nvram_len - *index; - spin_lock_irqsave(&bpa_nvram_lock, flags); + spin_lock_irqsave(&mmio_nvram_lock, flags); - memcpy_fromio(buf, bpa_nvram_start + *index, count); + memcpy_fromio(buf, mmio_nvram_start + *index, count); - spin_unlock_irqrestore(&bpa_nvram_lock, flags); + spin_unlock_irqrestore(&mmio_nvram_lock, flags); *index += count; return count; } -static ssize_t bpa_nvram_write(char *buf, size_t count, loff_t *index) +static ssize_t mmio_nvram_write(char *buf, size_t count, loff_t *index) { unsigned long flags; - if (*index >= bpa_nvram_len) + if (*index >= mmio_nvram_len) return 0; - if (*index + count > bpa_nvram_len) - count = bpa_nvram_len - *index; + if (*index + count > mmio_nvram_len) + count = mmio_nvram_len - *index; - spin_lock_irqsave(&bpa_nvram_lock, flags); + spin_lock_irqsave(&mmio_nvram_lock, flags); - memcpy_toio(bpa_nvram_start + *index, buf, count); + memcpy_toio(mmio_nvram_start + *index, buf, count); - spin_unlock_irqrestore(&bpa_nvram_lock, flags); + spin_unlock_irqrestore(&mmio_nvram_lock, flags); *index += count; return count; } -static ssize_t bpa_nvram_get_size(void) +static ssize_t mmio_nvram_get_size(void) { - return bpa_nvram_len; + return mmio_nvram_len; } -int __init bpa_nvram_init(void) +int __init mmio_nvram_init(void) { struct device_node *nvram_node; unsigned long *buffer; @@ -97,20 +97,20 @@ int __init bpa_nvram_init(void) ret = -ENODEV; nvram_addr = buffer[0]; - bpa_nvram_len = buffer[1]; - if ( (!bpa_nvram_len) || (!nvram_addr) ) + mmio_nvram_len = buffer[1]; + if ( (!mmio_nvram_len) || (!nvram_addr) ) goto out; - bpa_nvram_start = ioremap(nvram_addr, bpa_nvram_len); - if (!bpa_nvram_start) + mmio_nvram_start = ioremap(nvram_addr, mmio_nvram_len); + if (!mmio_nvram_start) goto out; - printk(KERN_INFO "BPA NVRAM, %luk mapped to %p\n", - bpa_nvram_len >> 10, bpa_nvram_start); + printk(KERN_INFO "mmio NVRAM, %luk mapped to %p\n", + mmio_nvram_len >> 10, mmio_nvram_start); - ppc_md.nvram_read = bpa_nvram_read; - ppc_md.nvram_write = bpa_nvram_write; - ppc_md.nvram_size = bpa_nvram_get_size; + ppc_md.nvram_read = mmio_nvram_read; + ppc_md.nvram_write = mmio_nvram_write; + ppc_md.nvram_size = mmio_nvram_get_size; out: of_node_put(nvram_node); diff --git a/arch/powerpc/sysdev/u3_iommu.c b/arch/powerpc/sysdev/u3_iommu.c index fba871a..f32baf7 100644 --- a/arch/powerpc/sysdev/u3_iommu.c +++ b/arch/powerpc/sysdev/u3_iommu.c @@ -1,5 +1,5 @@ /* - * arch/ppc64/kernel/u3_iommu.c + * arch/powerpc/sysdev/u3_iommu.c * * Copyright (C) 2004 Olof Johansson <olof@austin.ibm.com>, IBM Corporation * @@ -37,16 +37,16 @@ #include <linux/vmalloc.h> #include <asm/io.h> #include <asm/prom.h> -#include <asm/ppcdebug.h> #include <asm/iommu.h> #include <asm/pci-bridge.h> #include <asm/machdep.h> #include <asm/abs_addr.h> #include <asm/cacheflush.h> #include <asm/lmb.h> -#include <asm/dart.h> #include <asm/ppc-pci.h> +#include "dart.h" + extern int iommu_force_on; /* Physical base address and size of the DART table */ @@ -226,7 +226,7 @@ static void iommu_table_u3_setup(void) iommu_table_u3.it_busno = 0; iommu_table_u3.it_offset = 0; /* it_size is in number of entries */ - iommu_table_u3.it_size = dart_tablesize / sizeof(u32); + iommu_table_u3.it_size = (dart_tablesize / sizeof(u32)) >> DART_PAGE_FACTOR; /* Initialize the common IOMMU code */ iommu_table_u3.it_base = (unsigned long)dart_vbase; diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile index 79a784f..b20312e 100644 --- a/arch/powerpc/xmon/Makefile +++ b/arch/powerpc/xmon/Makefile @@ -8,4 +8,4 @@ obj-$(CONFIG_8xx) += start_8xx.o obj-$(CONFIG_6xx) += start_32.o obj-$(CONFIG_4xx) += start_32.o obj-$(CONFIG_PPC64) += start_64.o -obj-y += xmon.o ppc-dis.o ppc-opc.o subr_prf.o setjmp.o +obj-y += xmon.o ppc-dis.o ppc-opc.o setjmp.o nonstdio.o diff --git a/arch/powerpc/xmon/nonstdio.c b/arch/powerpc/xmon/nonstdio.c new file mode 100644 index 0000000..7876583 --- /dev/null +++ b/arch/powerpc/xmon/nonstdio.c @@ -0,0 +1,134 @@ +/* + * Copyright (C) 1996-2005 Paul Mackerras. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/string.h> +#include <asm/time.h> +#include "nonstdio.h" + +int xmon_putchar(int c) +{ + char ch = c; + + if (c == '\n') + xmon_putchar('\r'); + return xmon_write(&ch, 1) == 1? c: -1; +} + +static char line[256]; +static char *lineptr; +static int lineleft; + +int xmon_expect(const char *str, unsigned long timeout) +{ + int c; + unsigned long t0; + + /* assume 25MHz default timebase if tb_ticks_per_sec not set yet */ + timeout *= tb_ticks_per_sec? tb_ticks_per_sec: 25000000; + t0 = get_tbl(); + do { + lineptr = line; + for (;;) { + c = xmon_read_poll(); + if (c == -1) { + if (get_tbl() - t0 > timeout) + return 0; + continue; + } + if (c == '\n') + break; + if (c != '\r' && lineptr < &line[sizeof(line) - 1]) + *lineptr++ = c; + } + *lineptr = 0; + } while (strstr(line, str) == NULL); + return 1; +} + +int xmon_getchar(void) +{ + int c; + + if (lineleft == 0) { + lineptr = line; + for (;;) { + c = xmon_readchar(); + if (c == -1 || c == 4) + break; + if (c == '\r' || c == '\n') { + *lineptr++ = '\n'; + xmon_putchar('\n'); + break; + } + switch (c) { + case 0177: + case '\b': + if (lineptr > line) { + xmon_putchar('\b'); + xmon_putchar(' '); + xmon_putchar('\b'); + --lineptr; + } + break; + case 'U' & 0x1F: + while (lineptr > line) { + xmon_putchar('\b'); + xmon_putchar(' '); + xmon_putchar('\b'); + --lineptr; + } + break; + default: + if (lineptr >= &line[sizeof(line) - 1]) + xmon_putchar('\a'); + else { + xmon_putchar(c); + *lineptr++ = c; + } + } + } + lineleft = lineptr - line; + lineptr = line; + } + if (lineleft == 0) + return -1; + --lineleft; + return *lineptr++; +} + +char *xmon_gets(char *str, int nb) +{ + char *p; + int c; + + for (p = str; p < str + nb - 1; ) { + c = xmon_getchar(); + if (c == -1) { + if (p == str) + return NULL; + break; + } + *p++ = c; + if (c == '\n') + break; + } + *p = 0; + return str; +} + +void xmon_printf(const char *format, ...) +{ + va_list args; + int n; + static char xmon_outbuf[1024]; + + va_start(args, format); + n = vsnprintf(xmon_outbuf, sizeof(xmon_outbuf), format, args); + va_end(args); + xmon_write(xmon_outbuf, n); +} diff --git a/arch/powerpc/xmon/nonstdio.h b/arch/powerpc/xmon/nonstdio.h index 84211a2..47cebbd 100644 --- a/arch/powerpc/xmon/nonstdio.h +++ b/arch/powerpc/xmon/nonstdio.h @@ -1,22 +1,14 @@ -typedef int FILE; -extern FILE *xmon_stdin, *xmon_stdout; #define EOF (-1) -#define stdin xmon_stdin -#define stdout xmon_stdout + #define printf xmon_printf -#define fprintf xmon_fprintf -#define fputs xmon_fputs -#define fgets xmon_fgets #define putchar xmon_putchar -#define getchar xmon_getchar -#define putc xmon_putc -#define getc xmon_getc -#define fopen(n, m) NULL -#define fflush(f) do {} while (0) -#define fclose(f) do {} while (0) -extern char *fgets(char *, int, void *); -extern void xmon_printf(const char *, ...); -extern void xmon_fprintf(void *, const char *, ...); -extern void xmon_sprintf(char *, const char *, ...); -#define perror(s) printf("%s: no files!\n", (s)) +extern int xmon_putchar(int c); +extern int xmon_getchar(void); +extern char *xmon_gets(char *, int); +extern void xmon_printf(const char *, ...); +extern void xmon_map_scc(void); +extern int xmon_expect(const char *str, unsigned long timeout); +extern int xmon_write(void *ptr, int nb); +extern int xmon_readchar(void); +extern int xmon_read_poll(void); diff --git a/arch/powerpc/xmon/setjmp.S b/arch/powerpc/xmon/setjmp.S index f8e40df..96a91f1 100644 --- a/arch/powerpc/xmon/setjmp.S +++ b/arch/powerpc/xmon/setjmp.S @@ -14,61 +14,61 @@ _GLOBAL(xmon_setjmp) mflr r0 - STL r0,0(r3) - STL r1,SZL(r3) - STL r2,2*SZL(r3) + PPC_STL r0,0(r3) + PPC_STL r1,SZL(r3) + PPC_STL r2,2*SZL(r3) mfcr r0 - STL r0,3*SZL(r3) - STL r13,4*SZL(r3) - STL r14,5*SZL(r3) - STL r15,6*SZL(r3) - STL r16,7*SZL(r3) - STL r17,8*SZL(r3) - STL r18,9*SZL(r3) - STL r19,10*SZL(r3) - STL r20,11*SZL(r3) - STL r21,12*SZL(r3) - STL r22,13*SZL(r3) - STL r23,14*SZL(r3) - STL r24,15*SZL(r3) - STL r25,16*SZL(r3) - STL r26,17*SZL(r3) - STL r27,18*SZL(r3) - STL r28,19*SZL(r3) - STL r29,20*SZL(r3) - STL r30,21*SZL(r3) - STL r31,22*SZL(r3) + PPC_STL r0,3*SZL(r3) + PPC_STL r13,4*SZL(r3) + PPC_STL r14,5*SZL(r3) + PPC_STL r15,6*SZL(r3) + PPC_STL r16,7*SZL(r3) + PPC_STL r17,8*SZL(r3) + PPC_STL r18,9*SZL(r3) + PPC_STL r19,10*SZL(r3) + PPC_STL r20,11*SZL(r3) + PPC_STL r21,12*SZL(r3) + PPC_STL r22,13*SZL(r3) + PPC_STL r23,14*SZL(r3) + PPC_STL r24,15*SZL(r3) + PPC_STL r25,16*SZL(r3) + PPC_STL r26,17*SZL(r3) + PPC_STL r27,18*SZL(r3) + PPC_STL r28,19*SZL(r3) + PPC_STL r29,20*SZL(r3) + PPC_STL r30,21*SZL(r3) + PPC_STL r31,22*SZL(r3) li r3,0 blr _GLOBAL(xmon_longjmp) - CMPI r4,0 + PPC_LCMPI r4,0 bne 1f li r4,1 -1: LDL r13,4*SZL(r3) - LDL r14,5*SZL(r3) - LDL r15,6*SZL(r3) - LDL r16,7*SZL(r3) - LDL r17,8*SZL(r3) - LDL r18,9*SZL(r3) - LDL r19,10*SZL(r3) - LDL r20,11*SZL(r3) - LDL r21,12*SZL(r3) - LDL r22,13*SZL(r3) - LDL r23,14*SZL(r3) - LDL r24,15*SZL(r3) - LDL r25,16*SZL(r3) - LDL r26,17*SZL(r3) - LDL r27,18*SZL(r3) - LDL r28,19*SZL(r3) - LDL r29,20*SZL(r3) - LDL r30,21*SZL(r3) - LDL r31,22*SZL(r3) - LDL r0,3*SZL(r3) +1: PPC_LL r13,4*SZL(r3) + PPC_LL r14,5*SZL(r3) + PPC_LL r15,6*SZL(r3) + PPC_LL r16,7*SZL(r3) + PPC_LL r17,8*SZL(r3) + PPC_LL r18,9*SZL(r3) + PPC_LL r19,10*SZL(r3) + PPC_LL r20,11*SZL(r3) + PPC_LL r21,12*SZL(r3) + PPC_LL r22,13*SZL(r3) + PPC_LL r23,14*SZL(r3) + PPC_LL r24,15*SZL(r3) + PPC_LL r25,16*SZL(r3) + PPC_LL r26,17*SZL(r3) + PPC_LL r27,18*SZL(r3) + PPC_LL r28,19*SZL(r3) + PPC_LL r29,20*SZL(r3) + PPC_LL r30,21*SZL(r3) + PPC_LL r31,22*SZL(r3) + PPC_LL r0,3*SZL(r3) mtcrf 0x38,r0 - LDL r0,0(r3) - LDL r1,SZL(r3) - LDL r2,2*SZL(r3) + PPC_LL r0,0(r3) + PPC_LL r1,SZL(r3) + PPC_LL r2,2*SZL(r3) mtlr r0 mr r3,r4 blr @@ -84,52 +84,52 @@ _GLOBAL(xmon_longjmp) * different ABIs, though). */ _GLOBAL(xmon_save_regs) - STL r0,0*SZL(r3) - STL r2,2*SZL(r3) - STL r3,3*SZL(r3) - STL r4,4*SZL(r3) - STL r5,5*SZL(r3) - STL r6,6*SZL(r3) - STL r7,7*SZL(r3) - STL r8,8*SZL(r3) - STL r9,9*SZL(r3) - STL r10,10*SZL(r3) - STL r11,11*SZL(r3) - STL r12,12*SZL(r3) - STL r13,13*SZL(r3) - STL r14,14*SZL(r3) - STL r15,15*SZL(r3) - STL r16,16*SZL(r3) - STL r17,17*SZL(r3) - STL r18,18*SZL(r3) - STL r19,19*SZL(r3) - STL r20,20*SZL(r3) - STL r21,21*SZL(r3) - STL r22,22*SZL(r3) - STL r23,23*SZL(r3) - STL r24,24*SZL(r3) - STL r25,25*SZL(r3) - STL r26,26*SZL(r3) - STL r27,27*SZL(r3) - STL r28,28*SZL(r3) - STL r29,29*SZL(r3) - STL r30,30*SZL(r3) - STL r31,31*SZL(r3) + PPC_STL r0,0*SZL(r3) + PPC_STL r2,2*SZL(r3) + PPC_STL r3,3*SZL(r3) + PPC_STL r4,4*SZL(r3) + PPC_STL r5,5*SZL(r3) + PPC_STL r6,6*SZL(r3) + PPC_STL r7,7*SZL(r3) + PPC_STL r8,8*SZL(r3) + PPC_STL r9,9*SZL(r3) + PPC_STL r10,10*SZL(r3) + PPC_STL r11,11*SZL(r3) + PPC_STL r12,12*SZL(r3) + PPC_STL r13,13*SZL(r3) + PPC_STL r14,14*SZL(r3) + PPC_STL r15,15*SZL(r3) + PPC_STL r16,16*SZL(r3) + PPC_STL r17,17*SZL(r3) + PPC_STL r18,18*SZL(r3) + PPC_STL r19,19*SZL(r3) + PPC_STL r20,20*SZL(r3) + PPC_STL r21,21*SZL(r3) + PPC_STL r22,22*SZL(r3) + PPC_STL r23,23*SZL(r3) + PPC_STL r24,24*SZL(r3) + PPC_STL r25,25*SZL(r3) + PPC_STL r26,26*SZL(r3) + PPC_STL r27,27*SZL(r3) + PPC_STL r28,28*SZL(r3) + PPC_STL r29,29*SZL(r3) + PPC_STL r30,30*SZL(r3) + PPC_STL r31,31*SZL(r3) /* go up one stack frame for SP */ - LDL r4,0(r1) - STL r4,1*SZL(r3) + PPC_LL r4,0(r1) + PPC_STL r4,1*SZL(r3) /* get caller's LR */ - LDL r0,LRSAVE(r4) - STL r0,_NIP-STACK_FRAME_OVERHEAD(r3) - STL r0,_LINK-STACK_FRAME_OVERHEAD(r3) + PPC_LL r0,LRSAVE(r4) + PPC_STL r0,_NIP-STACK_FRAME_OVERHEAD(r3) + PPC_STL r0,_LINK-STACK_FRAME_OVERHEAD(r3) mfmsr r0 - STL r0,_MSR-STACK_FRAME_OVERHEAD(r3) + PPC_STL r0,_MSR-STACK_FRAME_OVERHEAD(r3) mfctr r0 - STL r0,_CTR-STACK_FRAME_OVERHEAD(r3) + PPC_STL r0,_CTR-STACK_FRAME_OVERHEAD(r3) mfxer r0 - STL r0,_XER-STACK_FRAME_OVERHEAD(r3) + PPC_STL r0,_XER-STACK_FRAME_OVERHEAD(r3) mfcr r0 - STL r0,_CCR-STACK_FRAME_OVERHEAD(r3) + PPC_STL r0,_CCR-STACK_FRAME_OVERHEAD(r3) li r0,0 - STL r0,_TRAP-STACK_FRAME_OVERHEAD(r3) + PPC_STL r0,_TRAP-STACK_FRAME_OVERHEAD(r3) blr diff --git a/arch/powerpc/xmon/start_32.c b/arch/powerpc/xmon/start_32.c index 69b658c..c2464df 100644 --- a/arch/powerpc/xmon/start_32.c +++ b/arch/powerpc/xmon/start_32.c @@ -11,7 +11,6 @@ #include <linux/cuda.h> #include <linux/kernel.h> #include <linux/errno.h> -#include <linux/sysrq.h> #include <linux/bitops.h> #include <asm/xmon.h> #include <asm/prom.h> @@ -22,10 +21,11 @@ #include <asm/processor.h> #include <asm/delay.h> #include <asm/btext.h> +#include <asm/time.h> +#include "nonstdio.h" static volatile unsigned char __iomem *sccc, *sccd; unsigned int TXRDY, RXRDY, DLAB; -static int xmon_expect(const char *str, unsigned int timeout); static int use_serial; static int use_screen; @@ -33,16 +33,6 @@ static int via_modem; static int xmon_use_sccb; static struct device_node *channel_node; -#define TB_SPEED 25000000 - -static inline unsigned int readtb(void) -{ - unsigned int ret; - - asm volatile("mftb %0" : "=r" (ret) :); - return ret; -} - void buf_access(void) { if (DLAB) @@ -91,23 +81,7 @@ static unsigned long chrp_find_phys_io_base(void) } #endif /* CONFIG_PPC_CHRP */ -#ifdef CONFIG_MAGIC_SYSRQ -static void sysrq_handle_xmon(int key, struct pt_regs *regs, - struct tty_struct *tty) -{ - xmon(regs); -} - -static struct sysrq_key_op sysrq_xmon_op = -{ - .handler = sysrq_handle_xmon, - .help_msg = "Xmon", - .action_msg = "Entering xmon", -}; -#endif - -void -xmon_map_scc(void) +void xmon_map_scc(void) { #ifdef CONFIG_PPC_MULTIPLATFORM volatile unsigned char __iomem *base; @@ -217,8 +191,6 @@ xmon_map_scc(void) RXRDY = 1; DLAB = 0x80; #endif /* platform */ - - register_sysrq_key('x', &sysrq_xmon_op); } static int scc_initialized = 0; @@ -238,8 +210,7 @@ static inline void do_poll_adb(void) #endif /* CONFIG_ADB_CUDA */ } -int -xmon_write(void *handle, void *ptr, int nb) +int xmon_write(void *ptr, int nb) { char *p = ptr; int i, c, ct; @@ -311,8 +282,7 @@ static unsigned char xmon_shift_keytab[128] = "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */ "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */ -static int -xmon_get_adb_key(void) +static int xmon_get_adb_key(void) { int k, t, on; @@ -350,32 +320,21 @@ xmon_get_adb_key(void) } #endif /* CONFIG_BOOTX_TEXT */ -int -xmon_read(void *handle, void *ptr, int nb) +int xmon_readchar(void) { - char *p = ptr; - int i; - #ifdef CONFIG_BOOTX_TEXT - if (use_screen) { - for (i = 0; i < nb; ++i) - *p++ = xmon_get_adb_key(); - return i; - } + if (use_screen) + return xmon_get_adb_key(); #endif - if (!scc_initialized) - xmon_init_scc(); - for (i = 0; i < nb; ++i) { + if (!scc_initialized) + xmon_init_scc(); while ((*sccc & RXRDY) == 0) - do_poll_adb(); + do_poll_adb(); buf_access(); - *p++ = *sccd; - } - return i; + return *sccd; } -int -xmon_read_poll(void) +int xmon_read_poll(void) { if ((*sccc & RXRDY) == 0) { do_poll_adb(); @@ -395,8 +354,7 @@ static unsigned char scc_inittab[] = { 3, 0xc1, /* rx enable, 8 bits */ }; -void -xmon_init_scc(void) +void xmon_init_scc(void) { if ( _machine == _MACH_chrp ) { @@ -410,6 +368,7 @@ xmon_init_scc(void) else if ( _machine == _MACH_Pmac ) { int i, x; + unsigned long timeout; if (channel_node != 0) pmac_call_feature( @@ -424,8 +383,12 @@ xmon_init_scc(void) PMAC_FTR_MODEM_ENABLE, channel_node, 0, 1); printk(KERN_INFO "Modem powered up by debugger !\n"); - t0 = readtb(); - while (readtb() - t0 < 3*TB_SPEED) + t0 = get_tbl(); + timeout = 3 * tb_ticks_per_sec; + if (timeout == 0) + /* assume 25MHz if tb_ticks_per_sec not set */ + timeout = 75000000; + while (get_tbl() - t0 < timeout) eieio(); } /* use the B channel if requested */ @@ -447,164 +410,19 @@ xmon_init_scc(void) scc_initialized = 1; if (via_modem) { for (;;) { - xmon_write(NULL, "ATE1V1\r", 7); + xmon_write("ATE1V1\r", 7); if (xmon_expect("OK", 5)) { - xmon_write(NULL, "ATA\r", 4); + xmon_write("ATA\r", 4); if (xmon_expect("CONNECT", 40)) break; } - xmon_write(NULL, "+++", 3); + xmon_write("+++", 3); xmon_expect("OK", 3); } } } -void *xmon_stdin; -void *xmon_stdout; -void *xmon_stderr; - -int xmon_putc(int c, void *f) -{ - char ch = c; - - if (c == '\n') - xmon_putc('\r', f); - return xmon_write(f, &ch, 1) == 1? c: -1; -} - -int xmon_putchar(int c) -{ - return xmon_putc(c, xmon_stdout); -} - -int xmon_fputs(char *str, void *f) -{ - int n = strlen(str); - - return xmon_write(f, str, n) == n? 0: -1; -} - -int -xmon_readchar(void) -{ - char ch; - - for (;;) { - switch (xmon_read(xmon_stdin, &ch, 1)) { - case 1: - return ch; - case -1: - xmon_printf("read(stdin) returned -1\r\n", 0, 0); - return -1; - } - } -} - -static char line[256]; -static char *lineptr; -static int lineleft; - -int xmon_expect(const char *str, unsigned int timeout) -{ - int c; - unsigned int t0; - - timeout *= TB_SPEED; - t0 = readtb(); - do { - lineptr = line; - for (;;) { - c = xmon_read_poll(); - if (c == -1) { - if (readtb() - t0 > timeout) - return 0; - continue; - } - if (c == '\n') - break; - if (c != '\r' && lineptr < &line[sizeof(line) - 1]) - *lineptr++ = c; - } - *lineptr = 0; - } while (strstr(line, str) == NULL); - return 1; -} - -int -xmon_getchar(void) -{ - int c; - - if (lineleft == 0) { - lineptr = line; - for (;;) { - c = xmon_readchar(); - if (c == -1 || c == 4) - break; - if (c == '\r' || c == '\n') { - *lineptr++ = '\n'; - xmon_putchar('\n'); - break; - } - switch (c) { - case 0177: - case '\b': - if (lineptr > line) { - xmon_putchar('\b'); - xmon_putchar(' '); - xmon_putchar('\b'); - --lineptr; - } - break; - case 'U' & 0x1F: - while (lineptr > line) { - xmon_putchar('\b'); - xmon_putchar(' '); - xmon_putchar('\b'); - --lineptr; - } - break; - default: - if (lineptr >= &line[sizeof(line) - 1]) - xmon_putchar('\a'); - else { - xmon_putchar(c); - *lineptr++ = c; - } - } - } - lineleft = lineptr - line; - lineptr = line; - } - if (lineleft == 0) - return -1; - --lineleft; - return *lineptr++; -} - -char * -xmon_fgets(char *str, int nb, void *f) -{ - char *p; - int c; - - for (p = str; p < str + nb - 1; ) { - c = xmon_getchar(); - if (c == -1) { - if (p == str) - return NULL; - break; - } - *p++ = c; - if (c == '\n') - break; - } - *p = 0; - return str; -} - -void -xmon_enter(void) +void xmon_enter(void) { #ifdef CONFIG_ADB_PMU if (_machine == _MACH_Pmac) { @@ -613,8 +431,7 @@ xmon_enter(void) #endif } -void -xmon_leave(void) +void xmon_leave(void) { #ifdef CONFIG_ADB_PMU if (_machine == _MACH_Pmac) { diff --git a/arch/powerpc/xmon/start_64.c b/arch/powerpc/xmon/start_64.c index e50c158..712552c 100644 --- a/arch/powerpc/xmon/start_64.c +++ b/arch/powerpc/xmon/start_64.c @@ -6,182 +6,29 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ -#include <linux/config.h> -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/sysrq.h> -#include <linux/init.h> #include <asm/machdep.h> -#include <asm/io.h> -#include <asm/page.h> -#include <asm/prom.h> -#include <asm/processor.h> #include <asm/udbg.h> -#include <asm/system.h> #include "nonstdio.h" -#ifdef CONFIG_MAGIC_SYSRQ - -static void sysrq_handle_xmon(int key, struct pt_regs *pt_regs, - struct tty_struct *tty) -{ - /* ensure xmon is enabled */ - xmon_init(1); - debugger(pt_regs); -} - -static struct sysrq_key_op sysrq_xmon_op = +void xmon_map_scc(void) { - .handler = sysrq_handle_xmon, - .help_msg = "Xmon", - .action_msg = "Entering xmon", -}; - -static int __init setup_xmon_sysrq(void) -{ - register_sysrq_key('x', &sysrq_xmon_op); - return 0; } -__initcall(setup_xmon_sysrq); -#endif /* CONFIG_MAGIC_SYSRQ */ -int -xmon_write(void *handle, void *ptr, int nb) +int xmon_write(void *ptr, int nb) { return udbg_write(ptr, nb); } -int -xmon_read(void *handle, void *ptr, int nb) +int xmon_readchar(void) { - return udbg_read(ptr, nb); + if (udbg_getc) + return udbg_getc(); + return -1; } -int -xmon_read_poll(void) +int xmon_read_poll(void) { if (udbg_getc_poll) return udbg_getc_poll(); return -1; } - -FILE *xmon_stdin; -FILE *xmon_stdout; - -int -xmon_putc(int c, void *f) -{ - char ch = c; - - if (c == '\n') - xmon_putc('\r', f); - return xmon_write(f, &ch, 1) == 1? c: -1; -} - -int -xmon_putchar(int c) -{ - return xmon_putc(c, xmon_stdout); -} - -int -xmon_fputs(char *str, void *f) -{ - int n = strlen(str); - - return xmon_write(f, str, n) == n? 0: -1; -} - -int -xmon_readchar(void) -{ - char ch; - - for (;;) { - switch (xmon_read(xmon_stdin, &ch, 1)) { - case 1: - return ch; - case -1: - xmon_printf("read(stdin) returned -1\r\n", 0, 0); - return -1; - } - } -} - -static char line[256]; -static char *lineptr; -static int lineleft; - -int -xmon_getchar(void) -{ - int c; - - if (lineleft == 0) { - lineptr = line; - for (;;) { - c = xmon_readchar(); - if (c == -1 || c == 4) - break; - if (c == '\r' || c == '\n') { - *lineptr++ = '\n'; - xmon_putchar('\n'); - break; - } - switch (c) { - case 0177: - case '\b': - if (lineptr > line) { - xmon_putchar('\b'); - xmon_putchar(' '); - xmon_putchar('\b'); - --lineptr; - } - break; - case 'U' & 0x1F: - while (lineptr > line) { - xmon_putchar('\b'); - xmon_putchar(' '); - xmon_putchar('\b'); - --lineptr; - } - break; - default: - if (lineptr >= &line[sizeof(line) - 1]) - xmon_putchar('\a'); - else { - xmon_putchar(c); - *lineptr++ = c; - } - } - } - lineleft = lineptr - line; - lineptr = line; - } - if (lineleft == 0) - return -1; - --lineleft; - return *lineptr++; -} - -char * -xmon_fgets(char *str, int nb, void *f) -{ - char *p; - int c; - - for (p = str; p < str + nb - 1; ) { - c = xmon_getchar(); - if (c == -1) { - if (p == str) - return NULL; - break; - } - *p++ = c; - if (c == '\n') - break; - } - *p = 0; - return str; -} diff --git a/arch/powerpc/xmon/start_8xx.c b/arch/powerpc/xmon/start_8xx.c index a48bd59..4c17b04 100644 --- a/arch/powerpc/xmon/start_8xx.c +++ b/arch/powerpc/xmon/start_8xx.c @@ -15,273 +15,30 @@ #include <asm/8xx_immap.h> #include <asm/mpc8xx.h> #include <asm/commproc.h> +#include "nonstdio.h" -extern void xmon_printf(const char *fmt, ...); extern int xmon_8xx_write(char *str, int nb); extern int xmon_8xx_read_poll(void); extern int xmon_8xx_read_char(void); -void prom_drawhex(uint); -void prom_drawstring(const char *str); -static int use_screen = 1; /* default */ - -#define TB_SPEED 25000000 - -static inline unsigned int readtb(void) -{ - unsigned int ret; - - asm volatile("mftb %0" : "=r" (ret) :); - return ret; -} - -void buf_access(void) -{ -} - -void -xmon_map_scc(void) +void xmon_map_scc(void) { - cpmp = (cpm8xx_t *)&(((immap_t *)IMAP_ADDR)->im_cpm); - use_screen = 0; - - prom_drawstring("xmon uses serial port\n"); } -static int scc_initialized = 0; - void xmon_init_scc(void); -int -xmon_write(void *handle, void *ptr, int nb) +int xmon_write(void *ptr, int nb) { - char *p = ptr; - int i, c, ct; - - if (!scc_initialized) - xmon_init_scc(); - return(xmon_8xx_write(ptr, nb)); } -int xmon_wants_key; - -int -xmon_read(void *handle, void *ptr, int nb) +int xmon_readchar(void) { - char *p = ptr; - int i; - - if (!scc_initialized) - xmon_init_scc(); - - for (i = 0; i < nb; ++i) { - *p++ = xmon_8xx_read_char(); - } - return i; + return xmon_8xx_read_char(); } -int -xmon_read_poll(void) +int xmon_read_poll(void) { return(xmon_8xx_read_poll()); } - -void -xmon_init_scc() -{ - scc_initialized = 1; -} - -#if 0 -extern int (*prom_entry)(void *); - -int -xmon_exit(void) -{ - struct prom_args { - char *service; - } args; - - for (;;) { - args.service = "exit"; - (*prom_entry)(&args); - } -} -#endif - -void *xmon_stdin; -void *xmon_stdout; -void *xmon_stderr; - -void -xmon_init(void) -{ -} - -int -xmon_putc(int c, void *f) -{ - char ch = c; - - if (c == '\n') - xmon_putc('\r', f); - return xmon_write(f, &ch, 1) == 1? c: -1; -} - -int -xmon_putchar(int c) -{ - return xmon_putc(c, xmon_stdout); -} - -int -xmon_fputs(char *str, void *f) -{ - int n = strlen(str); - - return xmon_write(f, str, n) == n? 0: -1; -} - -int -xmon_readchar(void) -{ - char ch; - - for (;;) { - switch (xmon_read(xmon_stdin, &ch, 1)) { - case 1: - return ch; - case -1: - xmon_printf("read(stdin) returned -1\r\n", 0, 0); - return -1; - } - } -} - -static char line[256]; -static char *lineptr; -static int lineleft; - -#if 0 -int xmon_expect(const char *str, unsigned int timeout) -{ - int c; - unsigned int t0; - - timeout *= TB_SPEED; - t0 = readtb(); - do { - lineptr = line; - for (;;) { - c = xmon_read_poll(); - if (c == -1) { - if (readtb() - t0 > timeout) - return 0; - continue; - } - if (c == '\n') - break; - if (c != '\r' && lineptr < &line[sizeof(line) - 1]) - *lineptr++ = c; - } - *lineptr = 0; - } while (strstr(line, str) == NULL); - return 1; -} -#endif - -int -xmon_getchar(void) -{ - int c; - - if (lineleft == 0) { - lineptr = line; - for (;;) { - c = xmon_readchar(); - if (c == -1 || c == 4) - break; - if (c == '\r' || c == '\n') { - *lineptr++ = '\n'; - xmon_putchar('\n'); - break; - } - switch (c) { - case 0177: - case '\b': - if (lineptr > line) { - xmon_putchar('\b'); - xmon_putchar(' '); - xmon_putchar('\b'); - --lineptr; - } - break; - case 'U' & 0x1F: - while (lineptr > line) { - xmon_putchar('\b'); - xmon_putchar(' '); - xmon_putchar('\b'); - --lineptr; - } - break; - default: - if (lineptr >= &line[sizeof(line) - 1]) - xmon_putchar('\a'); - else { - xmon_putchar(c); - *lineptr++ = c; - } - } - } - lineleft = lineptr - line; - lineptr = line; - } - if (lineleft == 0) - return -1; - --lineleft; - return *lineptr++; -} - -char * -xmon_fgets(char *str, int nb, void *f) -{ - char *p; - int c; - - for (p = str; p < str + nb - 1; ) { - c = xmon_getchar(); - if (c == -1) { - if (p == str) - return 0; - break; - } - *p++ = c; - if (c == '\n') - break; - } - *p = 0; - return str; -} - -void -prom_drawhex(uint val) -{ - unsigned char buf[10]; - - int i; - for (i = 7; i >= 0; i--) - { - buf[i] = "0123456789abcdef"[val & 0x0f]; - val >>= 4; - } - buf[8] = '\0'; - xmon_fputs(buf, xmon_stdout); -} - -void -prom_drawstring(const char *str) -{ - xmon_fputs(str, xmon_stdout); -} diff --git a/arch/powerpc/xmon/subr_prf.c b/arch/powerpc/xmon/subr_prf.c deleted file mode 100644 index b48738c..0000000 --- a/arch/powerpc/xmon/subr_prf.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Written by Cort Dougan to replace the version originally used - * by Paul Mackerras, which came from NetBSD and thus had copyright - * conflicts with Linux. - * - * This file makes liberal use of the standard linux utility - * routines to reduce the size of the binary. We assume we can - * trust some parts of Linux inside the debugger. - * -- Cort (cort@cs.nmt.edu) - * - * Copyright (C) 1999 Cort Dougan. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/module.h> -#include <stdarg.h> -#include "nonstdio.h" - -extern int xmon_write(void *, void *, int); - -void xmon_vfprintf(void *f, const char *fmt, va_list ap) -{ - static char xmon_buf[2048]; - int n; - - n = vsprintf(xmon_buf, fmt, ap); - xmon_write(f, xmon_buf, n); -} - -void xmon_printf(const char *fmt, ...) -{ - va_list ap; - - va_start(ap, fmt); - xmon_vfprintf(stdout, fmt, ap); - va_end(ap); -} -EXPORT_SYMBOL(xmon_printf); - -void xmon_fprintf(void *f, const char *fmt, ...) -{ - va_list ap; - - va_start(ap, fmt); - xmon_vfprintf(f, fmt, ap); - va_end(ap); -} - diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 1124f11..cfcb2a5 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -1,7 +1,7 @@ /* * Routines providing a simple monitor for use on the PowerMac. * - * Copyright (C) 1996 Paul Mackerras. + * Copyright (C) 1996-2005 Paul Mackerras. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -18,6 +18,7 @@ #include <linux/kallsyms.h> #include <linux/cpumask.h> #include <linux/module.h> +#include <linux/sysrq.h> #include <asm/ptrace.h> #include <asm/string.h> @@ -144,15 +145,10 @@ static void xmon_print_symbol(unsigned long address, const char *mid, static const char *getvecname(unsigned long vec); extern int print_insn_powerpc(unsigned long, unsigned long, int); -extern void printf(const char *fmt, ...); -extern void xmon_vfprintf(void *f, const char *fmt, va_list ap); -extern int xmon_putc(int c, void *f); -extern int putchar(int ch); extern void xmon_enter(void); extern void xmon_leave(void); -extern int xmon_read_poll(void); extern long setjmp(long *); extern void longjmp(long *, long); extern void xmon_save_regs(struct pt_regs *); @@ -748,7 +744,6 @@ cmds(struct pt_regs *excp) printf("%x:", smp_processor_id()); #endif /* CONFIG_SMP */ printf("mon> "); - fflush(stdout); flush_input(); termch = 0; cmd = skipbl(); @@ -1797,7 +1792,7 @@ memex(void) for(;;){ if (!mnoread) n = mread(adrs, val, size); - printf("%.16x%c", adrs, brev? 'r': ' '); + printf(REG"%c", adrs, brev? 'r': ' '); if (!mnoread) { if (brev) byterev(val, size); @@ -1976,17 +1971,18 @@ prdump(unsigned long adrs, long ndump) nr = mread(adrs, temp, r); adrs += nr; for (m = 0; m < r; ++m) { - if ((m & 7) == 0 && m > 0) - putchar(' '); + if ((m & (sizeof(long) - 1)) == 0 && m > 0) + putchar(' '); if (m < nr) printf("%.2x", temp[m]); else printf("%s", fault_chars[fault_type]); } - if (m <= 8) - printf(" "); - for (; m < 16; ++m) + for (; m < 16; ++m) { + if ((m & (sizeof(long) - 1)) == 0) + putchar(' '); printf(" "); + } printf(" |"); for (m = 0; m < r; ++m) { if (m < nr) { @@ -2151,7 +2147,6 @@ memzcan(void) ok = mread(a, &v, 1); if (ok && !ook) { printf("%.8x .. ", a); - fflush(stdout); } else if (!ok && ook) printf("%.8x\n", a - mskip); ook = ok; @@ -2372,7 +2367,7 @@ int inchar(void) { if (lineptr == NULL || *lineptr == 0) { - if (fgets(line, sizeof(line), stdin) == NULL) { + if (xmon_gets(line, sizeof(line)) == NULL) { lineptr = NULL; return EOF; } @@ -2526,4 +2521,29 @@ void xmon_init(int enable) __debugger_dabr_match = NULL; __debugger_fault_handler = NULL; } + xmon_map_scc(); +} + +#ifdef CONFIG_MAGIC_SYSRQ +static void sysrq_handle_xmon(int key, struct pt_regs *pt_regs, + struct tty_struct *tty) +{ + /* ensure xmon is enabled */ + xmon_init(1); + debugger(pt_regs); +} + +static struct sysrq_key_op sysrq_xmon_op = +{ + .handler = sysrq_handle_xmon, + .help_msg = "Xmon", + .action_msg = "Entering xmon", +}; + +static int __init setup_xmon_sysrq(void) +{ + register_sysrq_key('x', &sysrq_xmon_op); + return 0; } +__initcall(setup_xmon_sysrq); +#endif /* CONFIG_MAGIC_SYSRQ */ diff --git a/arch/ppc/4xx_io/serial_sicc.c b/arch/ppc/4xx_io/serial_sicc.c index e95c48d..84d96b8 100644 --- a/arch/ppc/4xx_io/serial_sicc.c +++ b/arch/ppc/4xx_io/serial_sicc.c @@ -1145,8 +1145,8 @@ static int set_serial_info(struct SICC_info *info, info->flags = ((state->flags & ~ASYNC_INTERNAL_FLAGS) | (info->flags & ASYNC_INTERNAL_FLAGS)); state->custom_divisor = new_serial.custom_divisor; - state->close_delay = new_serial.close_delay * HZ / 100; - state->closing_wait = new_serial.closing_wait * HZ / 100; + state->close_delay = msecs_to_jiffies(10 * new_serial.close_delay); + state->closing_wait = msecs_to_jiffies(10 * new_serial.closing_wait); info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; port->fifosize = new_serial.xmit_fifo_size; @@ -1465,10 +1465,8 @@ static void siccuart_close(struct tty_struct *tty, struct file *filp) info->event = 0; info->tty = NULL; if (info->blocked_open) { - if (info->state->close_delay) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(info->state->close_delay); - } + if (info->state->close_delay) + schedule_timeout_interruptible(info->state->close_delay); wake_up_interruptible(&info->open_wait); } info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); @@ -1496,7 +1494,7 @@ static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout) * Note: we have to use pretty tight timings here to satisfy * the NIST-PCTS. */ - char_time = (info->timeout - HZ/50) / info->port->fifosize; + char_time = (info->timeout - msecs_to_jiffies(20)) / info->port->fifosize; char_time = char_time / 5; if (char_time == 0) char_time = 1; @@ -1521,8 +1519,7 @@ static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout) tty->index, jiffies, expire, char_time); while ((readb(info->port->uart_base + BL_SICC_LSR) & _LSR_TX_ALL) != _LSR_TX_ALL) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(char_time); + schedule_timeout_interruptible(char_time); if (signal_pending(current)) break; if (timeout && time_after(jiffies, expire)) @@ -1773,7 +1770,7 @@ int __init siccuart_init(void) for (i = 0; i < SERIAL_SICC_NR; i++) { struct SICC_state *state = sicc_state + i; state->line = i; - state->close_delay = 5 * HZ / 10; + state->close_delay = msecs_to_jiffies(500); state->closing_wait = 30 * HZ; spin_lock_init(&state->sicc_lock); } diff --git a/arch/ppc/8260_io/fcc_enet.c b/arch/ppc/8260_io/fcc_enet.c index 2086c6a..4edeede 100644 --- a/arch/ppc/8260_io/fcc_enet.c +++ b/arch/ppc/8260_io/fcc_enet.c @@ -1309,8 +1309,7 @@ static void mii_dm9161_wait(uint mii_reg, struct net_device *dev) /* Davicom takes a bit to come up after a reset, * so wait here for a bit */ - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(timeout); + schedule_timeout_uninterruptible(timeout); } static phy_info_t phy_info_dm9161 = { diff --git a/arch/ppc/8xx_io/commproc.c b/arch/ppc/8xx_io/commproc.c index b42789f..579cd40 100644 --- a/arch/ppc/8xx_io/commproc.c +++ b/arch/ppc/8xx_io/commproc.c @@ -388,9 +388,8 @@ void m8xx_cpm_dpinit(void) /* * Allocate the requested size worth of DP memory. - * This function used to return an index into the DPRAM area. - * Now it returns the actuall physical address of that area. - * use m8xx_cpm_dpram_offset() to get the index + * This function returns an offset into the DPRAM area. + * Use cpm_dpram_addr() to get the virtual address of the area. */ uint cpm_dpalloc(uint size, uint align) { diff --git a/arch/ppc/8xx_io/cs4218_tdm.c b/arch/ppc/8xx_io/cs4218_tdm.c index 532caa3..49eb2a7 100644 --- a/arch/ppc/8xx_io/cs4218_tdm.c +++ b/arch/ppc/8xx_io/cs4218_tdm.c @@ -1013,8 +1013,7 @@ static void CS_IrqCleanup(void) */ cpm_free_handler(CPMVEC_SMC2); - if (beep_buf) - kfree(beep_buf); + kfree(beep_buf); kd_mksound = orig_mksound; } #endif /* MODULE */ diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 114b90f..8fa51b0 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -746,6 +746,16 @@ config MPC834x bool default y if MPC834x_SYS +config CPM1 + bool + depends on 8xx + default y + help + The CPM1 (Communications Processor Module) is a coprocessor on + embedded CPUs made by Motorola. Selecting this option means that + you wish to build a kernel for a machine with a CPM1 coprocessor + on it (8xx, 827x, 8560). + config CPM2 bool depends on 8260 || MPC8560 || MPC8555 @@ -1247,6 +1257,14 @@ source "drivers/pci/Kconfig" source "drivers/pcmcia/Kconfig" +config RAPIDIO + bool "RapidIO support" if MPC8540 || MPC8560 + help + If you say Y here, the kernel will include drivers and + infrastructure code to support RapidIO interconnect devices. + +source "drivers/rapidio/Kconfig" + endmenu menu "Advanced setup" diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile index 94d5716..e719a49 100644 --- a/arch/ppc/Makefile +++ b/arch/ppc/Makefile @@ -66,7 +66,8 @@ head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o core-y += arch/ppc/kernel/ arch/powerpc/kernel/ \ arch/ppc/platforms/ \ arch/ppc/mm/ arch/ppc/lib/ \ - arch/ppc/syslib/ arch/powerpc/sysdev/ + arch/ppc/syslib/ arch/powerpc/sysdev/ \ + arch/powerpc/lib/ core-$(CONFIG_4xx) += arch/ppc/platforms/4xx/ core-$(CONFIG_83xx) += arch/ppc/platforms/83xx/ core-$(CONFIG_85xx) += arch/ppc/platforms/85xx/ diff --git a/arch/ppc/boot/include/of1275.h b/arch/ppc/boot/include/of1275.h index 69173df..4ed88ac 100644 --- a/arch/ppc/boot/include/of1275.h +++ b/arch/ppc/boot/include/of1275.h @@ -19,6 +19,9 @@ extern prom_entry of_prom_entry; /* function declarations */ +int call_prom(const char *service, int nargs, int nret, ...); +int call_prom_ret(const char *service, int nargs, int nret, + unsigned int *rets, ...); void * claim(unsigned int virt, unsigned int size, unsigned int align); int map(unsigned int phys, unsigned int virt, unsigned int size); void enter(void); diff --git a/arch/ppc/boot/of1275/Makefile b/arch/ppc/boot/of1275/Makefile index 02e6f23..0b979c0 100644 --- a/arch/ppc/boot/of1275/Makefile +++ b/arch/ppc/boot/of1275/Makefile @@ -3,4 +3,4 @@ # lib-y := claim.o enter.o exit.o finddevice.o getprop.o ofinit.o \ - ofstdio.o read.o release.o write.o map.o + ofstdio.o read.o release.o write.o map.o call_prom.o diff --git a/arch/ppc/boot/of1275/call_prom.c b/arch/ppc/boot/of1275/call_prom.c new file mode 100644 index 0000000..9479a3a --- /dev/null +++ b/arch/ppc/boot/of1275/call_prom.c @@ -0,0 +1,74 @@ +/* + * Copyright (C) 1996-2005 Paul Mackerras. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include "of1275.h" +#include <stdarg.h> + +int call_prom(const char *service, int nargs, int nret, ...) +{ + int i; + struct prom_args { + const char *service; + int nargs; + int nret; + unsigned int args[12]; + } args; + va_list list; + + args.service = service; + args.nargs = nargs; + args.nret = nret; + + va_start(list, nret); + for (i = 0; i < nargs; i++) + args.args[i] = va_arg(list, unsigned int); + va_end(list); + + for (i = 0; i < nret; i++) + args.args[nargs+i] = 0; + + if (of_prom_entry(&args) < 0) + return -1; + + return (nret > 0)? args.args[nargs]: 0; +} + +int call_prom_ret(const char *service, int nargs, int nret, + unsigned int *rets, ...) +{ + int i; + struct prom_args { + const char *service; + int nargs; + int nret; + unsigned int args[12]; + } args; + va_list list; + + args.service = service; + args.nargs = nargs; + args.nret = nret; + + va_start(list, rets); + for (i = 0; i < nargs; i++) + args.args[i] = va_arg(list, unsigned int); + va_end(list); + + for (i = 0; i < nret; i++) + args.args[nargs+i] = 0; + + if (of_prom_entry(&args) < 0) + return -1; + + if (rets != (void *) 0) + for (i = 1; i < nret; ++i) + rets[i-1] = args.args[nargs+i]; + + return (nret > 0)? args.args[nargs]: 0; +} diff --git a/arch/ppc/boot/of1275/claim.c b/arch/ppc/boot/of1275/claim.c index 13169a5..1ed3aee 100644 --- a/arch/ppc/boot/of1275/claim.c +++ b/arch/ppc/boot/of1275/claim.c @@ -9,27 +9,84 @@ */ #include "of1275.h" +#include "nonstdio.h" -void * -claim(unsigned int virt, unsigned int size, unsigned int align) +/* + * Older OF's require that when claiming a specific range of addresses, + * we claim the physical space in the /memory node and the virtual + * space in the chosen mmu node, and then do a map operation to + * map virtual to physical. + */ +static int need_map = -1; +static ihandle chosen_mmu; +static phandle memory; + +/* returns true if s2 is a prefix of s1 */ +static int string_match(const char *s1, const char *s2) +{ + for (; *s2; ++s2) + if (*s1++ != *s2) + return 0; + return 1; +} + +static int check_of_version(void) +{ + phandle oprom, chosen; + char version[64]; + + oprom = finddevice("/openprom"); + if (oprom == OF_INVALID_HANDLE) + return 0; + if (getprop(oprom, "model", version, sizeof(version)) <= 0) + return 0; + version[sizeof(version)-1] = 0; + printf("OF version = '%s'\n", version); + if (!string_match(version, "Open Firmware, 1.") + && !string_match(version, "FirmWorks,3.")) + return 0; + chosen = finddevice("/chosen"); + if (chosen == OF_INVALID_HANDLE) { + chosen = finddevice("/chosen@0"); + if (chosen == OF_INVALID_HANDLE) { + printf("no chosen\n"); + return 0; + } + } + if (getprop(chosen, "mmu", &chosen_mmu, sizeof(chosen_mmu)) <= 0) { + printf("no mmu\n"); + return 0; + } + memory = (ihandle) call_prom("open", 1, 1, "/memory"); + if (memory == OF_INVALID_HANDLE) { + memory = (ihandle) call_prom("open", 1, 1, "/memory@0"); + if (memory == OF_INVALID_HANDLE) { + printf("no memory node\n"); + return 0; + } + } + printf("old OF detected\n"); + return 1; +} + +void *claim(unsigned int virt, unsigned int size, unsigned int align) { - struct prom_args { - char *service; - int nargs; - int nret; - unsigned int virt; - unsigned int size; - unsigned int align; - void *ret; - } args; + int ret; + unsigned int result; - args.service = "claim"; - args.nargs = 3; - args.nret = 1; - args.virt = virt; - args.size = size; - args.align = align; - args.ret = (void *) 0; - (*of_prom_entry)(&args); - return args.ret; + if (need_map < 0) + need_map = check_of_version(); + if (align || !need_map) + return (void *) call_prom("claim", 3, 1, virt, size, align); + + ret = call_prom_ret("call-method", 5, 2, &result, "claim", memory, + align, size, virt); + if (ret != 0 || result == -1) + return (void *) -1; + ret = call_prom_ret("call-method", 5, 2, &result, "claim", chosen_mmu, + align, size, virt); + /* 0x12 == coherent + read/write */ + ret = call_prom("call-method", 6, 1, "map", chosen_mmu, + 0x12, size, virt, virt); + return virt; } diff --git a/arch/ppc/boot/of1275/finddevice.c b/arch/ppc/boot/of1275/finddevice.c index 2c0f7cb..0dcb120 100644 --- a/arch/ppc/boot/of1275/finddevice.c +++ b/arch/ppc/boot/of1275/finddevice.c @@ -10,22 +10,7 @@ #include "of1275.h" -phandle -finddevice(const char *name) +phandle finddevice(const char *name) { - struct prom_args { - char *service; - int nargs; - int nret; - const char *devspec; - phandle device; - } args; - - args.service = "finddevice"; - args.nargs = 1; - args.nret = 1; - args.devspec = name; - args.device = OF_INVALID_HANDLE; - (*of_prom_entry)(&args); - return args.device; + return (phandle) call_prom("finddevice", 1, 1, name); } diff --git a/arch/ppc/boot/openfirmware/Makefile b/arch/ppc/boot/openfirmware/Makefile index 0341523..83a6433 100644 --- a/arch/ppc/boot/openfirmware/Makefile +++ b/arch/ppc/boot/openfirmware/Makefile @@ -80,8 +80,7 @@ $(obj)/note: $(utils)/mknote FORCE $(call if_changed,mknote) -$(obj)/coffcrt0.o: EXTRA_AFLAGS := -traditional -DXCOFF -$(obj)/crt0.o: EXTRA_AFLAGS := -traditional +$(obj)/coffcrt0.o: EXTRA_AFLAGS := -DXCOFF targets += coffcrt0.o crt0.o $(obj)/coffcrt0.o $(obj)/crt0.o: $(common)/crt0.S FORCE $(call if_changed_dep,as_o_S) diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile index b7bd8f6..82df88b 100644 --- a/arch/ppc/boot/simple/Makefile +++ b/arch/ppc/boot/simple/Makefile @@ -67,6 +67,12 @@ zimageinitrd-$(CONFIG_BAMBOO) := zImage.initrd-TREE entrypoint-$(CONFIG_BAMBOO) := 0x01000000 extra.o-$(CONFIG_BAMBOO) := pibs.o + zimage-$(CONFIG_BUBINGA) := zImage-TREE +zimageinitrd-$(CONFIG_BUBINGA) := zImage.initrd-TREE + end-$(CONFIG_BUBINGA) := bubinga + entrypoint-$(CONFIG_BUBINGA) := 0x01000000 + extra.o-$(CONFIG_BUBINGA) := openbios.o + zimage-$(CONFIG_EBONY) := zImage-TREE zimageinitrd-$(CONFIG_EBONY) := zImage.initrd-TREE end-$(CONFIG_EBONY) := ebony @@ -79,12 +85,30 @@ zimageinitrd-$(CONFIG_LUAN) := zImage.initrd-TREE entrypoint-$(CONFIG_LUAN) := 0x01000000 extra.o-$(CONFIG_LUAN) := pibs.o + zimage-$(CONFIG_YUCCA) := zImage-TREE +zimageinitrd-$(CONFIG_YUCCA) := zImage.initrd-TREE + end-$(CONFIG_YUCCA) := yucca + entrypoint-$(CONFIG_YUCCA) := 0x01000000 + extra.o-$(CONFIG_YUCCA) := pibs.o + zimage-$(CONFIG_OCOTEA) := zImage-TREE zimageinitrd-$(CONFIG_OCOTEA) := zImage.initrd-TREE end-$(CONFIG_OCOTEA) := ocotea entrypoint-$(CONFIG_OCOTEA) := 0x01000000 extra.o-$(CONFIG_OCOTEA) := pibs.o + zimage-$(CONFIG_SYCAMORE) := zImage-TREE +zimageinitrd-$(CONFIG_SYCAMORE) := zImage.initrd-TREE + end-$(CONFIG_SYCAMORE) := sycamore + entrypoint-$(CONFIG_SYCAMORE) := 0x01000000 + extra.o-$(CONFIG_SYCAMORE) := openbios.o + + zimage-$(CONFIG_WALNUT) := zImage-TREE +zimageinitrd-$(CONFIG_WALNUT) := zImage.initrd-TREE + end-$(CONFIG_WALNUT) := walnut + entrypoint-$(CONFIG_WALNUT) := 0x01000000 + extra.o-$(CONFIG_WALNUT) := openbios.o + extra.o-$(CONFIG_EV64260) := misc-ev64260.o end-$(CONFIG_EV64260) := ev64260 cacheflag-$(CONFIG_EV64260) := -include $(clear_L2_L3) @@ -162,7 +186,8 @@ OBJCOPY_ARGS := -O elf32-powerpc # head.o and relocate.o must be at the start. boot-y := head.o relocate.o $(extra.o-y) $(misc-y) -boot-$(CONFIG_40x) += embed_config.o +boot-$(CONFIG_REDWOOD_5) += embed_config.o +boot-$(CONFIG_REDWOOD_6) += embed_config.o boot-$(CONFIG_8xx) += embed_config.o boot-$(CONFIG_8260) += embed_config.o boot-$(CONFIG_BSEIP) += iic.o diff --git a/arch/ppc/boot/simple/misc.c b/arch/ppc/boot/simple/misc.c index e02de5b..f415d6c 100644 --- a/arch/ppc/boot/simple/misc.c +++ b/arch/ppc/boot/simple/misc.c @@ -23,7 +23,7 @@ #include <asm/page.h> #include <asm/mmu.h> #include <asm/bootinfo.h> -#ifdef CONFIG_44x +#ifdef CONFIG_4xx #include <asm/ibm4xx.h> #endif #include <asm/reg.h> @@ -88,6 +88,14 @@ get_mem_size(void) return 0; } +#if defined(CONFIG_40x) +#define PPC4xx_EMAC0_MR0 EMAC0_BASE +#endif + +#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0) +#define PPC4xx_EMAC0_MR0 PPC44x_EMAC0_MR0 +#endif + struct bi_record * decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum) { @@ -103,13 +111,13 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum) com_port = serial_init(0, NULL); #endif -#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0) +#if defined(PPC4xx_EMAC0_MR0) /* Reset MAL */ mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR); /* Wait for reset */ while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {}; /* Reset EMAC */ - *(volatile unsigned long *)PPC44x_EMAC0_MR0 = 0x20000000; + *(volatile unsigned long *)PPC4xx_EMAC0_MR0 = 0x20000000; __asm__ __volatile__("eieio"); #endif @@ -164,7 +172,9 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum) puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n"); } +#ifndef CONFIG_40x /* don't overwrite the 40x image located at 0x00400000! */ avail_ram = (char *)0x00400000; +#endif end_avail = (char *)0x00800000; puts("avail ram: "); puthex((unsigned long)avail_ram); puts(" "); puthex((unsigned long)end_avail); puts("\n"); diff --git a/arch/ppc/boot/simple/openbios.c b/arch/ppc/boot/simple/openbios.c index c732b6d..81f11d8 100644 --- a/arch/ppc/boot/simple/openbios.c +++ b/arch/ppc/boot/simple/openbios.c @@ -1,19 +1,43 @@ /* * arch/ppc/boot/simple/openbios.c * - * 2005 (c) SYSGO AG - g.jaeger@sysgo.com + * Copyright (c) 2005 DENX Software Engineering + * Stefan Roese <sr@denx.de> + * + * Based on original work by + * 2005 (c) SYSGO AG - g.jaeger@sysgo.com + * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without * any warranty of any kind, whether express or implied. * - * Derived from arch/ppc/boot/simple/pibs.c (from MontaVista) */ #include <linux/types.h> #include <linux/config.h> #include <linux/string.h> #include <asm/ppcboot.h> -#include <platforms/4xx/ebony.h> +#include <asm/ibm4xx.h> +#include <asm/reg.h> +#ifdef CONFIG_40x +#include <asm/io.h> +#endif + +#if defined(CONFIG_BUBINGA) +#define BOARD_INFO_VECTOR 0xFFF80B50 /* openbios 1.19 moved this vector down - armin */ +#else +#define BOARD_INFO_VECTOR 0xFFFE0B50 +#endif + +#ifdef CONFIG_40x +/* Supply a default Ethernet address for those eval boards that don't + * ship with one. This is an address from the MBX board I have, so + * it is unlikely you will find it on your network. + */ +static ushort def_enet_addr[] = { 0x0800, 0x3e26, 0x1559 }; + +extern unsigned long timebase_period_ns; +#endif /* CONFIG_40x */ extern unsigned long decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum); @@ -23,15 +47,85 @@ extern unsigned long decompress_kernel(unsigned long load_addr, int num_words, bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot"))); bd_t *hold_residual = &hold_resid_buf; +typedef struct openbios_board_info { + unsigned char bi_s_version[4]; /* Version of this structure */ + unsigned char bi_r_version[30]; /* Version of the IBM ROM */ + unsigned int bi_memsize; /* DRAM installed, in bytes */ +#ifdef CONFIG_405EP + unsigned char bi_enetaddr[2][6]; /* Local Ethernet MAC address */ +#else /* CONFIG_405EP */ + unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */ +#endif /* CONFIG_405EP */ + unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ + unsigned int bi_intfreq; /* Processor speed, in Hz */ + unsigned int bi_busfreq; /* PLB Bus speed, in Hz */ + unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ +#ifdef CONFIG_405EP + unsigned int bi_opb_busfreq; /* OPB Bus speed, in Hz */ + unsigned int bi_pllouta_freq; /* PLL OUTA speed, in Hz */ +#endif /* CONFIG_405EP */ +} openbios_bd_t; + void * load_kernel(unsigned long load_addr, int num_words, unsigned long cksum, void *ign1, void *ign2) { - decompress_kernel(load_addr, num_words, cksum); +#ifdef CONFIG_40x + openbios_bd_t *openbios_bd = NULL; + openbios_bd_t *(*get_board_info)(void) = + (openbios_bd_t *(*)(void))(*(unsigned long *)BOARD_INFO_VECTOR); + + /* + * On 40x platforms we not only need the MAC-addresses, but also the + * clocks and memsize. Now try to get all values using the OpenBIOS + * "get_board_info()" callback. + */ + if ((openbios_bd = get_board_info()) != NULL) { + /* + * Copy bd_info from OpenBIOS struct into U-Boot struct + * used by kernel + */ + hold_residual->bi_memsize = openbios_bd->bi_memsize; + hold_residual->bi_intfreq = openbios_bd->bi_intfreq; + hold_residual->bi_busfreq = openbios_bd->bi_busfreq; + hold_residual->bi_pci_busfreq = openbios_bd->bi_pci_busfreq; + memcpy(hold_residual->bi_pci_enetaddr, openbios_bd->bi_pci_enetaddr, 6); +#ifdef CONFIG_405EP + memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr[0], 6); + memcpy(hold_residual->bi_enet1addr, openbios_bd->bi_enetaddr[1], 6); + hold_residual->bi_opbfreq = openbios_bd->bi_opb_busfreq; + hold_residual->bi_procfreq = openbios_bd->bi_pllouta_freq; +#else /* CONFIG_405EP */ + memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr, 6); +#endif /* CONFIG_405EP */ + } else { + /* Hmmm...better try to stuff some defaults. + */ + hold_residual->bi_memsize = 16 * 1024 * 1024; + hold_residual->bi_intfreq = 200000000; + hold_residual->bi_busfreq = 100000000; + hold_residual->bi_pci_busfreq = 66666666; + + /* + * Only supply one mac-address in this fallback + */ + memcpy(hold_residual->bi_enetaddr, (void *)def_enet_addr, 6); +#ifdef CONFIG_405EP + hold_residual->bi_opbfreq = 50000000; + hold_residual->bi_procfreq = 200000000; +#endif /* CONFIG_405EP */ + } + timebase_period_ns = 1000000000 / hold_residual->bi_intfreq; +#endif /* CONFIG_40x */ + +#ifdef CONFIG_440GP /* simply copy the MAC addresses */ - memcpy(hold_residual->bi_enetaddr, (char *)EBONY_OPENBIOS_MAC_BASE, 6); - memcpy(hold_residual->bi_enet1addr, (char *)(EBONY_OPENBIOS_MAC_BASE+EBONY_OPENBIOS_MAC_OFFSET), 6); + memcpy(hold_residual->bi_enetaddr, (char *)OPENBIOS_MAC_BASE, 6); + memcpy(hold_residual->bi_enet1addr, (char *)(OPENBIOS_MAC_BASE+OPENBIOS_MAC_OFFSET), 6); +#endif /* CONFIG_440GP */ + + decompress_kernel(load_addr, num_words, cksum); return (void *)hold_residual; } diff --git a/arch/ppc/configs/ev64360_defconfig b/arch/ppc/configs/ev64360_defconfig index de9bbb7..d471e57 100644 --- a/arch/ppc/configs/ev64360_defconfig +++ b/arch/ppc/configs/ev64360_defconfig @@ -1,17 +1,17 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc5 -# Fri Aug 5 15:18:23 2005 +# Linux kernel version: 2.6.14 +# Fri Oct 28 19:15:34 2005 # CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y CONFIG_PPC=y CONFIG_PPC32=y CONFIG_GENERIC_NVRAM=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y # # Code maturity level options @@ -26,6 +26,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -35,6 +36,7 @@ CONFIG_SYSCTL=y CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -74,7 +76,7 @@ CONFIG_TAU=y # CONFIG_TAU_AVERAGE is not set # CONFIG_KEXEC is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PM is not set +# CONFIG_WANT_EARLY_SERIAL is not set CONFIG_PPC_STD_MMU=y CONFIG_NOT_COHERENT_CACHE=y @@ -86,22 +88,18 @@ CONFIG_NOT_COHERENT_CACHE=y # CONFIG_KATANA is not set # CONFIG_WILLOW is not set # CONFIG_CPCI690 is not set -# CONFIG_PCORE is not set # CONFIG_POWERPMC250 is not set # CONFIG_CHESTNUT is not set # CONFIG_SPRUCE is not set # CONFIG_HDPU is not set # CONFIG_EV64260 is not set # CONFIG_LOPEC is not set -# CONFIG_MCPN765 is not set # CONFIG_MVME5100 is not set # CONFIG_PPLUS is not set # CONFIG_PRPMC750 is not set # CONFIG_PRPMC800 is not set # CONFIG_SANDPOINT is not set # CONFIG_RADSTONE_PPC7D is not set -# CONFIG_ADIR is not set -# CONFIG_K2 is not set # CONFIG_PAL4 is not set # CONFIG_GEMINI is not set # CONFIG_EST8260 is not set @@ -138,10 +136,13 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyMM0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2" +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -152,7 +153,6 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_LEGACY_PROC is not set -# CONFIG_PCI_NAMES is not set # # PCCARD (PCMCIA/CardBus) support @@ -206,14 +206,19 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set # +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set @@ -239,6 +244,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -252,6 +258,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # CONFIG_MTD=y @@ -358,7 +369,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set @@ -379,6 +389,7 @@ CONFIG_IOSCHED_CFQ=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -420,6 +431,10 @@ CONFIG_NETDEVICES=y # CONFIG_ARCNET is not set # +# PHY device support +# + +# # Ethernet (10 or 100Mbit) # # CONFIG_NET_ETHERNET is not set @@ -434,6 +449,7 @@ CONFIG_NETDEVICES=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set @@ -446,6 +462,7 @@ CONFIG_MV643XX_ETH_0=y # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -547,7 +564,20 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Watchdog Cards # -# CONFIG_WATCHDOG is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_MV64X60_WDT=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -571,7 +601,6 @@ CONFIG_GEN_RTC=y # I2C support # # CONFIG_I2C is not set -# CONFIG_I2C_SENSOR is not set # # Dallas's 1-wire bus @@ -582,6 +611,7 @@ CONFIG_GEN_RTC=y # Hardware Monitoring support # CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -589,6 +619,10 @@ CONFIG_HWMON=y # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -651,10 +685,6 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -663,6 +693,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -683,11 +714,10 @@ CONFIG_DNOTIFY=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -735,6 +765,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -751,6 +782,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y @@ -767,6 +799,7 @@ CONFIG_ZLIB_DEFLATE=y # CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SERIAL_TEXT_DEBUG is not set # # Security options diff --git a/arch/ppc/configs/mpc834x_sys_defconfig b/arch/ppc/configs/mpc834x_sys_defconfig index 4a5522c..673dc64 100644 --- a/arch/ppc/configs/mpc834x_sys_defconfig +++ b/arch/ppc/configs/mpc834x_sys_defconfig @@ -1,16 +1,17 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc4 -# Thu Feb 17 16:12:23 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 15:38:29 2005 # CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y CONFIG_PPC=y CONFIG_PPC32=y CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y # # Code maturity level options @@ -18,23 +19,28 @@ CONFIG_GENERIC_NVRAM=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y # CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -44,6 +50,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -59,34 +66,84 @@ CONFIG_6xx=y # CONFIG_POWER3 is not set # CONFIG_POWER4 is not set # CONFIG_8xx is not set +# CONFIG_E200 is not set # CONFIG_E500 is not set +CONFIG_PPC_FPU=y +# CONFIG_KEXEC is not set # CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set CONFIG_PPC_GEN550=y -CONFIG_83xx=y - -# -# Freescale 83xx options -# -CONFIG_MPC834x_SYS=y -CONFIG_MPC834x=y CONFIG_PPC_STD_MMU=y # # Platform options # +# CONFIG_PPC_MULTIPLATFORM is not set +# CONFIG_APUS is not set +# CONFIG_KATANA is not set +# CONFIG_WILLOW is not set +# CONFIG_CPCI690 is not set +# CONFIG_POWERPMC250 is not set +# CONFIG_CHESTNUT is not set +# CONFIG_SPRUCE is not set +# CONFIG_HDPU is not set +# CONFIG_EV64260 is not set +# CONFIG_LOPEC is not set +# CONFIG_MVME5100 is not set +# CONFIG_PPLUS is not set +# CONFIG_PRPMC750 is not set +# CONFIG_PRPMC800 is not set +# CONFIG_SANDPOINT is not set +# CONFIG_RADSTONE_PPC7D is not set +# CONFIG_PAL4 is not set +# CONFIG_GEMINI is not set +# CONFIG_EST8260 is not set +# CONFIG_SBC82xx is not set +# CONFIG_SBS8260 is not set +# CONFIG_RPX8260 is not set +# CONFIG_TQM8260 is not set +# CONFIG_ADS8272 is not set +# CONFIG_PQ2FADS is not set +# CONFIG_LITE5200 is not set +CONFIG_MPC834x_SYS=y +# CONFIG_EV64360 is not set +CONFIG_83xx=y +CONFIG_MPC834x=y # CONFIG_SMP is not set -# CONFIG_PREEMPT is not set # CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y # # Bus options # CONFIG_GENERIC_ISA_DMA=y -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_MPC83xx_PCI2 is not set +CONFIG_PCI_LEGACY_PROC=y # # PCCARD (PCMCIA/CardBus) support @@ -94,10 +151,6 @@ CONFIG_GENERIC_ISA_DMA=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # Advanced setup # # CONFIG_ADVANCED_OPTIONS is not set @@ -112,6 +165,75 @@ CONFIG_TASK_SIZE=0x80000000 CONFIG_BOOT_LOAD=0x00800000 # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# # Device Drivers # @@ -123,6 +245,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set @@ -140,15 +267,19 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Block devices # # CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set @@ -159,6 +290,11 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ATA_OVER_ETH is not set # @@ -169,6 +305,7 @@ CONFIG_IOSCHED_CFQ=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -179,110 +316,116 @@ CONFIG_IOSCHED_CFQ=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # +# CONFIG_IEEE1394 is not set # # I2O device support # +# CONFIG_I2O is not set # # Macintosh device drivers # # -# Networking support +# Network device support # -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set # -# SCTP Configuration (EXPERIMENTAL) +# ARCnet devices # -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set +# CONFIG_ARCNET is not set # -# QoS and/or fair queueing +# PHY device support # -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set +CONFIG_PHYLIB=y # -# Network testing +# MII PHY device drivers # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set # # Ethernet (1000 Mbit) # +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set CONFIG_GIANFAR=y # CONFIG_GFAR_NAPI is not set # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set # # Token Ring devices # +# CONFIG_TR is not set # # Wireless LAN (non-hamradio) @@ -293,10 +436,14 @@ CONFIG_GIANFAR=y # Wan interfaces # # CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -323,14 +470,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -340,6 +479,12 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # # CONFIG_VT is not set @@ -358,6 +503,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -376,6 +522,7 @@ CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver @@ -385,6 +532,12 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# # I2C support # CONFIG_I2C=y @@ -400,23 +553,68 @@ CONFIG_I2C_CHARDEV=y # # I2C Hardware Bus support # -# CONFIG_I2C_ISA is not set +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support # -# CONFIG_I2C_SENSOR is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -427,33 +625,26 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # -# Other I2C Chip support -# -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus +# Misc devices # -# CONFIG_W1 is not set # -# Misc devices +# Multimedia Capabilities Port drivers # # @@ -479,11 +670,12 @@ CONFIG_I2C_MPC=y # # USB support # -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # @@ -502,10 +694,15 @@ CONFIG_I2C_MPC=y # CONFIG_INFINIBAND is not set # +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set @@ -515,17 +712,16 @@ CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set - -# -# XFS support -# +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -546,12 +742,10 @@ CONFIG_DNOTIFY=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -580,6 +774,7 @@ CONFIG_NFS_FS=y # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -588,6 +783,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -614,6 +810,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set @@ -625,7 +822,9 @@ CONFIG_CRC32=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_SERIAL_TEXT_DEBUG is not set # diff --git a/arch/ppc/configs/stx_gp3_defconfig b/arch/ppc/configs/stx_gp3_defconfig index 66dae83..3fedc43 100644 --- a/arch/ppc/configs/stx_gp3_defconfig +++ b/arch/ppc/configs/stx_gp3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc2 -# Wed Jan 26 14:32:58 2005 +# Linux kernel version: 2.6.12-rc4 +# Tue May 24 18:11:04 2005 # CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y @@ -11,6 +11,7 @@ CONFIG_HAVE_DEC_LOCK=y CONFIG_PPC=y CONFIG_PPC32=y CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # # Code maturity level options @@ -18,6 +19,7 @@ CONFIG_GENERIC_NVRAM=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -29,7 +31,6 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set @@ -37,6 +38,9 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -46,6 +50,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -69,9 +74,11 @@ CONFIG_KMOD=y CONFIG_E500=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set # CONFIG_SPE is not set CONFIG_MATH_EMULATION=y # CONFIG_CPU_FREQ is not set +# CONFIG_PM is not set CONFIG_85xx=y CONFIG_PPC_INDIRECT_PCI_BE=y @@ -96,6 +103,7 @@ CONFIG_HIGHMEM=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y # # Bus options @@ -104,15 +112,15 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_LEGACY_PROC is not set # CONFIG_PCI_NAMES is not set +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set - -# -# PC-card bridges -# +CONFIG_RAPIDIO=y +CONFIG_RAPIDIO_8_BIT_TRANSPORT=y +CONFIG_RAPIDIO_DISC_TIMEOUT=30 # # Advanced setup @@ -152,7 +160,7 @@ CONFIG_PARPORT=m CONFIG_PARPORT_PC=m # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_OTHER is not set +# CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_1284 is not set # @@ -264,7 +272,6 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set @@ -274,7 +281,6 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=m @@ -283,6 +289,7 @@ CONFIG_SCSI_QLA2XXX=m # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set @@ -322,7 +329,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -431,7 +437,7 @@ CONFIG_IP_NF_NAT_FTP=m # # Network testing # -# CONFIG_NET_PKTGEN is not set +CONFIG_NET_PKTGEN=y # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_HAMRADIO is not set @@ -499,6 +505,7 @@ CONFIG_GFAR_NAPI=y # Wan interfaces # # CONFIG_WAN is not set +CONFIG_RIONET=y # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set @@ -536,20 +543,6 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -567,6 +560,19 @@ CONFIG_MOUSE_PS2=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # # CONFIG_VT is not set @@ -590,6 +596,7 @@ CONFIG_SERIAL_CPM_SCC2=y # CONFIG_SERIAL_CPM_SCC4 is not set # CONFIG_SERIAL_CPM_SMC1 is not set # CONFIG_SERIAL_CPM_SMC2 is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -626,6 +633,11 @@ CONFIG_DRM=m # CONFIG_RAW_DRIVER is not set # +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# # I2C support # CONFIG_I2C=m @@ -648,12 +660,12 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set # CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set @@ -677,7 +689,9 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -688,9 +702,11 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set @@ -700,10 +716,12 @@ CONFIG_I2C_ALGOBIT=m # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -732,7 +750,6 @@ CONFIG_I2C_ALGOBIT=m # Graphics support # # CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -752,13 +769,9 @@ CONFIG_SOUND=m # # USB support # -# CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# +# CONFIG_USB is not set # # USB Gadget Support @@ -789,6 +802,10 @@ CONFIG_JBD_DEBUG=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set + +# +# XFS support +# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -859,7 +876,6 @@ CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y -# CONFIG_EXPORTFS is not set CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -942,8 +958,10 @@ CONFIG_ZLIB_INFLATE=m # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y # CONFIG_MAGIC_SYSRQ is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index b35346d..17a4da6 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -12,7 +12,7 @@ extra-$(CONFIG_6xx) += idle_6xx.o extra-$(CONFIG_POWER4) += idle_power4.o extra-y += vmlinux.lds -obj-y := entry.o traps.o irq.o idle.o time.o misc.o \ +obj-y := entry.o traps.o idle.o time.o misc.o \ process.o align.o \ setup.o \ ppc_htab.o @@ -22,6 +22,7 @@ obj-$(CONFIG_POWER4) += cpu_setup_power4.o obj-$(CONFIG_MODULES) += module.o ppc_ksyms.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_RAPIDIO) += rio.o obj-$(CONFIG_KGDB) += ppc-stub.o obj-$(CONFIG_SMP) += smp.o smp-tbsync.o obj-$(CONFIG_TAU) += temp.o @@ -37,15 +38,13 @@ endif # These are here while we do the architecture merge else -obj-y := irq.o idle.o \ - align.o +obj-y := idle.o align.o obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_KGDB) += ppc-stub.o -obj-$(CONFIG_SMP) += smp.o smp-tbsync.o obj-$(CONFIG_TAU) += temp.o ifndef CONFIG_E200 obj-$(CONFIG_FSL_BOOKE) += perfmon_fsl_booke.o diff --git a/arch/ppc/kernel/bitops.c b/arch/ppc/kernel/bitops.c deleted file mode 100644 index 7f53d19..0000000 --- a/arch/ppc/kernel/bitops.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * Copyright (C) 1996 Paul Mackerras. - */ - -#include <linux/kernel.h> -#include <linux/bitops.h> - -/* - * If the bitops are not inlined in bitops.h, they are defined here. - * -- paulus - */ -#if !__INLINE_BITOPS -void set_bit(int nr, volatile void * addr) -{ - unsigned long old; - unsigned long mask = 1 << (nr & 0x1f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 5); - - __asm__ __volatile__(SMP_WMB "\n\ -1: lwarx %0,0,%3 \n\ - or %0,%0,%2 \n" - PPC405_ERR77(0,%3) -" stwcx. %0,0,%3 \n\ - bne 1b" - SMP_MB - : "=&r" (old), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc" ); -} - -void clear_bit(int nr, volatile void *addr) -{ - unsigned long old; - unsigned long mask = 1 << (nr & 0x1f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 5); - - __asm__ __volatile__(SMP_WMB "\n\ -1: lwarx %0,0,%3 \n\ - andc %0,%0,%2 \n" - PPC405_ERR77(0,%3) -" stwcx. %0,0,%3 \n\ - bne 1b" - SMP_MB - : "=&r" (old), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc"); -} - -void change_bit(int nr, volatile void *addr) -{ - unsigned long old; - unsigned long mask = 1 << (nr & 0x1f); - unsigned long *p = ((unsigned long *)addr) + (nr >> 5); - - __asm__ __volatile__(SMP_WMB "\n\ -1: lwarx %0,0,%3 \n\ - xor %0,%0,%2 \n" - PPC405_ERR77(0,%3) -" stwcx. %0,0,%3 \n\ - bne 1b" - SMP_MB - : "=&r" (old), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc"); -} - -int test_and_set_bit(int nr, volatile void *addr) -{ - unsigned int old, t; - unsigned int mask = 1 << (nr & 0x1f); - volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5); - - __asm__ __volatile__(SMP_WMB "\n\ -1: lwarx %0,0,%4 \n\ - or %1,%0,%3 \n" - PPC405_ERR77(0,%4) -" stwcx. %1,0,%4 \n\ - bne 1b" - SMP_MB - : "=&r" (old), "=&r" (t), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc"); - - return (old & mask) != 0; -} - -int test_and_clear_bit(int nr, volatile void *addr) -{ - unsigned int old, t; - unsigned int mask = 1 << (nr & 0x1f); - volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5); - - __asm__ __volatile__(SMP_WMB "\n\ -1: lwarx %0,0,%4 \n\ - andc %1,%0,%3 \n" - PPC405_ERR77(0,%4) -" stwcx. %1,0,%4 \n\ - bne 1b" - SMP_MB - : "=&r" (old), "=&r" (t), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc"); - - return (old & mask) != 0; -} - -int test_and_change_bit(int nr, volatile void *addr) -{ - unsigned int old, t; - unsigned int mask = 1 << (nr & 0x1f); - volatile unsigned int *p = ((volatile unsigned int *)addr) + (nr >> 5); - - __asm__ __volatile__(SMP_WMB "\n\ -1: lwarx %0,0,%4 \n\ - xor %1,%0,%3 \n" - PPC405_ERR77(0,%4) -" stwcx. %1,0,%4 \n\ - bne 1b" - SMP_MB - : "=&r" (old), "=&r" (t), "=m" (*p) - : "r" (mask), "r" (p), "m" (*p) - : "cc"); - - return (old & mask) != 0; -} -#endif /* !__INLINE_BITOPS */ diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S index 8b49679..677c571 100644 --- a/arch/ppc/kernel/head_44x.S +++ b/arch/ppc/kernel/head_44x.S @@ -190,8 +190,8 @@ skpinv: addi r4,r4,1 /* Increment */ /* xlat fields */ lis r4,UART0_PHYS_IO_BASE@h /* RPN depends on SoC */ -#ifndef CONFIG_440EP - ori r4,r4,0x0001 /* ERPN is 1 for second 4GB page */ +#ifdef UART0_PHYS_ERPN + ori r4,r4,UART0_PHYS_ERPN /* Add ERPN if above 4GB */ #endif /* attrib fields */ diff --git a/arch/ppc/kernel/head_booke.h b/arch/ppc/kernel/head_booke.h index aeb349b..f3d274c 100644 --- a/arch/ppc/kernel/head_booke.h +++ b/arch/ppc/kernel/head_booke.h @@ -358,6 +358,6 @@ label: NORMAL_EXCEPTION_PROLOG; \ bne load_up_fpu; /* if from user, just load it up */ \ addi r3,r1,STACK_FRAME_OVERHEAD; \ - EXC_XFER_EE_LITE(0x800, KernelFP) + EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception) #endif /* __HEAD_BOOKE_H__ */ diff --git a/arch/ppc/kernel/idle.c b/arch/ppc/kernel/idle.c index 11e5b44..821a75e 100644 --- a/arch/ppc/kernel/idle.c +++ b/arch/ppc/kernel/idle.c @@ -53,10 +53,6 @@ void default_idle(void) } #endif } - if (need_resched()) - schedule(); - if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) - cpu_die(); } /* @@ -64,11 +60,22 @@ void default_idle(void) */ void cpu_idle(void) { - for (;;) - if (ppc_md.idle != NULL) - ppc_md.idle(); - else - default_idle(); + int cpu = smp_processor_id(); + + for (;;) { + while (!need_resched()) { + if (ppc_md.idle != NULL) + ppc_md.idle(); + else + default_idle(); + } + + if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) + cpu_die(); + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + } } #if defined(CONFIG_SYSCTL) && defined(CONFIG_6xx) diff --git a/arch/ppc/kernel/irq.c b/arch/ppc/kernel/irq.c deleted file mode 100644 index 772e428..0000000 --- a/arch/ppc/kernel/irq.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * arch/ppc/kernel/irq.c - * - * Derived from arch/i386/kernel/irq.c - * Copyright (C) 1992 Linus Torvalds - * Adapted from arch/i386 by Gary Thomas - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * Updated and modified by Cort Dougan <cort@fsmlabs.com> - * Copyright (C) 1996-2001 Cort Dougan - * Adapted for Power Macintosh by Paul Mackerras - * Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au) - * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). - * - * This file contains the code used by various IRQ handling routines: - * asking for different IRQ's should be done through these routines - * instead of just grabbing them. Thus setups with different IRQ numbers - * shouldn't result in any weird surprises, and installing new handlers - * should be easier. - * - * The MPC8xx has an interrupt mask in the SIU. If a bit is set, the - * interrupt is _enabled_. As expected, IRQ0 is bit 0 in the 32-bit - * mask register (of which only 16 are defined), hence the weird shifting - * and complement of the cached_irq_mask. I want to be able to stuff - * this right into the SIU SMASK register. - * Many of the prep/chrp functions are conditional compiled on CONFIG_8xx - * to reduce code space and undefined function references. - */ - -#include <linux/errno.h> -#include <linux/module.h> -#include <linux/threads.h> -#include <linux/kernel_stat.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/ptrace.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/timex.h> -#include <linux/config.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/irq.h> -#include <linux/proc_fs.h> -#include <linux/random.h> -#include <linux/seq_file.h> -#include <linux/cpumask.h> -#include <linux/profile.h> -#include <linux/bitops.h> - -#include <asm/uaccess.h> -#include <asm/system.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/irq.h> -#include <asm/cache.h> -#include <asm/prom.h> -#include <asm/ptrace.h> -#include <asm/machdep.h> - -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) - -extern atomic_t ipi_recv; -extern atomic_t ipi_sent; - -#define MAXCOUNT 10000000 - -int ppc_spurious_interrupts = 0; -struct irqaction *ppc_irq_action[NR_IRQS]; -unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; -unsigned long ppc_lost_interrupts[NR_MASK_WORDS]; -atomic_t ppc_n_lost_interrupts; - -#ifdef CONFIG_TAU_INT -extern int tau_initialized; -extern int tau_interrupts(int); -#endif - -int show_interrupts(struct seq_file *p, void *v) -{ - int i = *(loff_t *) v, j; - struct irqaction * action; - unsigned long flags; - - if (i == 0) { - seq_puts(p, " "); - for (j=0; j<NR_CPUS; j++) - if (cpu_online(j)) - seq_printf(p, "CPU%d ", j); - seq_putc(p, '\n'); - } - - if (i < NR_IRQS) { - spin_lock_irqsave(&irq_desc[i].lock, flags); - action = irq_desc[i].action; - if ( !action || !action->handler ) - goto skip; - seq_printf(p, "%3d: ", i); -#ifdef CONFIG_SMP - for (j = 0; j < NR_CPUS; j++) - if (cpu_online(j)) - seq_printf(p, "%10u ", - kstat_cpu(j).irqs[i]); -#else - seq_printf(p, "%10u ", kstat_irqs(i)); -#endif /* CONFIG_SMP */ - if (irq_desc[i].handler) - seq_printf(p, " %s ", irq_desc[i].handler->typename); - else - seq_puts(p, " None "); - seq_printf(p, "%s", (irq_desc[i].status & IRQ_LEVEL) ? "Level " : "Edge "); - seq_printf(p, " %s", action->name); - for (action = action->next; action; action = action->next) - seq_printf(p, ", %s", action->name); - seq_putc(p, '\n'); -skip: - spin_unlock_irqrestore(&irq_desc[i].lock, flags); - } else if (i == NR_IRQS) { -#ifdef CONFIG_TAU_INT - if (tau_initialized){ - seq_puts(p, "TAU: "); - for (j = 0; j < NR_CPUS; j++) - if (cpu_online(j)) - seq_printf(p, "%10u ", tau_interrupts(j)); - seq_puts(p, " PowerPC Thermal Assist (cpu temp)\n"); - } -#endif -#ifdef CONFIG_SMP - /* should this be per processor send/receive? */ - seq_printf(p, "IPI (recv/sent): %10u/%u\n", - atomic_read(&ipi_recv), atomic_read(&ipi_sent)); -#endif - seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts); - } - return 0; -} - -void do_IRQ(struct pt_regs *regs) -{ - int irq, first = 1; - irq_enter(); - - /* - * Every platform is required to implement ppc_md.get_irq. - * This function will either return an irq number or -1 to - * indicate there are no more pending. But the first time - * through the loop this means there wasn't and IRQ pending. - * The value -2 is for buggy hardware and means that this IRQ - * has already been handled. -- Tom - */ - while ((irq = ppc_md.get_irq(regs)) >= 0) { - __do_IRQ(irq, regs); - first = 0; - } - if (irq != -2 && first) - /* That's not SMP safe ... but who cares ? */ - ppc_spurious_interrupts++; - irq_exit(); -} - -void __init init_IRQ(void) -{ - ppc_md.init_IRQ(); -} diff --git a/arch/ppc/kernel/machine_kexec.c b/arch/ppc/kernel/machine_kexec.c index a727877..a882b0d 100644 --- a/arch/ppc/kernel/machine_kexec.c +++ b/arch/ppc/kernel/machine_kexec.c @@ -32,7 +32,7 @@ const extern unsigned int relocate_new_kernel_size; * Provide a dummy crash_notes definition while crash dump arrives to ppc. * This prevents breakage of crash_notes attribute in kernel/ksysfs.c. */ -void *crash_notes = NULL; +note_buf_t crash_notes[NR_CPUS]; void machine_shutdown(void) { diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S index 3056ede..5e61124 100644 --- a/arch/ppc/kernel/misc.S +++ b/arch/ppc/kernel/misc.S @@ -25,6 +25,11 @@ #include <asm/thread_info.h> #include <asm/asm-offsets.h> +#ifdef CONFIG_8xx +#define ISYNC_8xx isync +#else +#define ISYNC_8xx +#endif .text .align 5 @@ -492,9 +497,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) * and invalidate the corresponding instruction cache blocks. * This is a no-op on the 601. * - * flush_icache_range(unsigned long start, unsigned long stop) + * __flush_icache_range(unsigned long start, unsigned long stop) */ -_GLOBAL(flush_icache_range) +_GLOBAL(__flush_icache_range) BEGIN_FTR_SECTION blr /* for 601, do nothing */ END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) @@ -800,8 +805,18 @@ _GLOBAL(_insb) subi r4,r4,1 blelr- 00: lbz r5,0(r3) - eieio - stbu r5,1(r4) +01: eieio +02: stbu r5,1(r4) + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr @@ -811,8 +826,18 @@ _GLOBAL(_outsb) subi r4,r4,1 blelr- 00: lbzu r5,1(r4) - stb r5,0(r3) - eieio +01: stb r5,0(r3) +02: eieio + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr @@ -822,8 +847,18 @@ _GLOBAL(_insw) subi r4,r4,2 blelr- 00: lhbrx r5,0,r3 - eieio - sthu r5,2(r4) +01: eieio +02: sthu r5,2(r4) + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr @@ -833,8 +868,18 @@ _GLOBAL(_outsw) subi r4,r4,2 blelr- 00: lhzu r5,2(r4) - eieio - sthbrx r5,0,r3 +01: eieio +02: sthbrx r5,0,r3 + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr @@ -844,8 +889,18 @@ _GLOBAL(_insl) subi r4,r4,4 blelr- 00: lwbrx r5,0,r3 - eieio - stwu r5,4(r4) +01: eieio +02: stwu r5,4(r4) + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr @@ -855,8 +910,18 @@ _GLOBAL(_outsl) subi r4,r4,4 blelr- 00: lwzu r5,4(r4) - stwbrx r5,0,r3 - eieio +01: stwbrx r5,0,r3 +02: eieio + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr @@ -867,8 +932,18 @@ _GLOBAL(_insw_ns) subi r4,r4,2 blelr- 00: lhz r5,0(r3) - eieio - sthu r5,2(r4) +01: eieio +02: sthu r5,2(r4) + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr @@ -879,8 +954,18 @@ _GLOBAL(_outsw_ns) subi r4,r4,2 blelr- 00: lhzu r5,2(r4) - sth r5,0(r3) - eieio +01: sth r5,0(r3) +02: eieio + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr @@ -891,8 +976,18 @@ _GLOBAL(_insl_ns) subi r4,r4,4 blelr- 00: lwz r5,0(r3) - eieio - stwu r5,4(r4) +01: eieio +02: stwu r5,4(r4) + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr @@ -903,8 +998,18 @@ _GLOBAL(_outsl_ns) subi r4,r4,4 blelr- 00: lwzu r5,4(r4) - stw r5,0(r3) - eieio +01: stw r5,0(r3) +02: eieio + ISYNC_8xx + .section .fixup,"ax" +03: blr + .text + .section __ex_table, "a" + .align 2 + .long 00b, 03b + .long 01b, 03b + .long 02b, 03b + .text bdnz 00b blr diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index ae24196..66073f7 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -46,6 +46,7 @@ #include <asm/btext.h> #include <asm/div64.h> #include <asm/xmon.h> +#include <asm/signal.h> #ifdef CONFIG_8xx #include <asm/commproc.h> @@ -57,7 +58,6 @@ extern void machine_check_exception(struct pt_regs *regs); extern void alignment_exception(struct pt_regs *regs); extern void program_check_exception(struct pt_regs *regs); extern void single_step_exception(struct pt_regs *regs); -extern int do_signal(sigset_t *, struct pt_regs *); extern int pmac_newworld; extern int sys_sigreturn(struct pt_regs *regs); @@ -78,7 +78,6 @@ EXPORT_SYMBOL(program_check_exception); EXPORT_SYMBOL(single_step_exception); EXPORT_SYMBOL(sys_sigreturn); EXPORT_SYMBOL(ppc_n_lost_interrupts); -EXPORT_SYMBOL(ppc_lost_interrupts); EXPORT_SYMBOL(ISA_DMA_THRESHOLD); EXPORT_SYMBOL(DMA_MODE_READ); @@ -131,6 +130,11 @@ EXPORT_SYMBOL(outw); EXPORT_SYMBOL(outl); EXPORT_SYMBOL(outsl);*/ +EXPORT_SYMBOL(__ide_mm_insl); +EXPORT_SYMBOL(__ide_mm_outsw); +EXPORT_SYMBOL(__ide_mm_insw); +EXPORT_SYMBOL(__ide_mm_outsl); + EXPORT_SYMBOL(_insb); EXPORT_SYMBOL(_outsb); EXPORT_SYMBOL(_insw); @@ -171,6 +175,7 @@ EXPORT_SYMBOL(pci_bus_to_phys); #endif /* CONFIG_PCI */ #ifdef CONFIG_NOT_COHERENT_CACHE +extern void flush_dcache_all(void); EXPORT_SYMBOL(flush_dcache_all); #endif @@ -212,9 +217,6 @@ EXPORT_SYMBOL(adb_try_handler_change); EXPORT_SYMBOL(cuda_request); EXPORT_SYMBOL(cuda_poll); #endif /* CONFIG_ADB_CUDA */ -#ifdef CONFIG_PPC_MULTIPLATFORM -EXPORT_SYMBOL(_machine); -#endif #ifdef CONFIG_PPC_PMAC EXPORT_SYMBOL(sys_ctrler); EXPORT_SYMBOL(pmac_newworld); diff --git a/arch/ppc/kernel/rio.c b/arch/ppc/kernel/rio.c new file mode 100644 index 0000000..29487fe --- /dev/null +++ b/arch/ppc/kernel/rio.c @@ -0,0 +1,52 @@ +/* + * RapidIO PPC32 support + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter <mporter@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/rio.h> + +#include <asm/rio.h> + +/** + * platform_rio_init - Do platform specific RIO init + * + * Any platform specific initialization of RapdIO + * hardware is done here as well as registration + * of any active master ports in the system. + */ +void __attribute__ ((weak)) + platform_rio_init(void) +{ + printk(KERN_WARNING "RIO: No platform_rio_init() present\n"); +} + +/** + * ppc_rio_init - Do PPC32 RIO init + * + * Calls platform-specific RIO init code and then calls + * rio_init_mports() to initialize any master ports that + * have been registered with the RIO subsystem. + */ +static int __init ppc_rio_init(void) +{ + printk(KERN_INFO "RIO: RapidIO init\n"); + + /* Platform specific initialization */ + platform_rio_init(); + + /* Enumerate all registered ports */ + rio_init_mports(); + + return 0; +} + +subsys_initcall(ppc_rio_init); diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index 6bcb85d..dc55e1a 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -76,6 +76,7 @@ unsigned int DMA_MODE_WRITE; #ifdef CONFIG_PPC_MULTIPLATFORM int _machine = 0; +EXPORT_SYMBOL(_machine); extern void prep_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7); diff --git a/arch/ppc/kernel/smp.c b/arch/ppc/kernel/smp.c index bc5bf11..43b8fc2 100644 --- a/arch/ppc/kernel/smp.c +++ b/arch/ppc/kernel/smp.c @@ -341,6 +341,7 @@ int __devinit start_secondary(void *unused) cpu = smp_processor_id(); smp_store_cpu_info(cpu); set_dec(tb_ticks_per_jiffy); + preempt_disable(); cpu_callin_map[cpu] = 1; printk("CPU %d done callin...\n", cpu); diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c index f265b81..9dbc4d2 100644 --- a/arch/ppc/kernel/traps.c +++ b/arch/ppc/kernel/traps.c @@ -49,7 +49,7 @@ extern int xmon_sstep(struct pt_regs *regs); extern int xmon_iabr_match(struct pt_regs *regs); extern int xmon_dabr_match(struct pt_regs *regs); -void (*debugger)(struct pt_regs *regs) = xmon; +int (*debugger)(struct pt_regs *regs) = xmon; int (*debugger_bpt)(struct pt_regs *regs) = xmon_bpt; int (*debugger_sstep)(struct pt_regs *regs) = xmon_sstep; int (*debugger_iabr_match)(struct pt_regs *regs) = xmon_iabr_match; @@ -57,7 +57,7 @@ int (*debugger_dabr_match)(struct pt_regs *regs) = xmon_dabr_match; void (*debugger_fault_handler)(struct pt_regs *regs); #else #ifdef CONFIG_KGDB -void (*debugger)(struct pt_regs *regs); +int (*debugger)(struct pt_regs *regs); int (*debugger_bpt)(struct pt_regs *regs); int (*debugger_sstep)(struct pt_regs *regs); int (*debugger_iabr_match)(struct pt_regs *regs); @@ -159,7 +159,7 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr) */ static inline int check_io_access(struct pt_regs *regs) { -#ifdef CONFIG_PPC_PMAC +#if defined CONFIG_PPC_PMAC || defined CONFIG_8xx unsigned long msr = regs->msr; const struct exception_table_entry *entry; unsigned int *nip = (unsigned int *)regs->nip; @@ -178,7 +178,11 @@ static inline int check_io_access(struct pt_regs *regs) nip -= 2; else if (*nip == 0x4c00012c) /* isync */ --nip; - if (*nip == 0x7c0004ac || (*nip >> 26) == 3) { + /* eieio from I/O string functions */ + else if ((*nip) == 0x7c0006ac || *(nip+1) == 0x7c0006ac) + nip += 2; + if (*nip == 0x7c0004ac || (*nip >> 26) == 3 || + (*(nip+1) >> 26) == 3) { /* sync or twi */ unsigned int rb; @@ -606,22 +610,22 @@ int check_bug_trap(struct pt_regs *regs) if (bug->line & BUG_WARNING_TRAP) { /* this is a WARN_ON rather than BUG/BUG_ON */ #ifdef CONFIG_XMON - xmon_printf(KERN_ERR "Badness in %s at %s:%d\n", + xmon_printf(KERN_ERR "Badness in %s at %s:%ld\n", bug->function, bug->file, bug->line & ~BUG_WARNING_TRAP); #endif /* CONFIG_XMON */ - printk(KERN_ERR "Badness in %s at %s:%d\n", + printk(KERN_ERR "Badness in %s at %s:%ld\n", bug->function, bug->file, bug->line & ~BUG_WARNING_TRAP); dump_stack(); return 1; } #ifdef CONFIG_XMON - xmon_printf(KERN_CRIT "kernel BUG in %s at %s:%d!\n", + xmon_printf(KERN_CRIT "kernel BUG in %s at %s:%ld!\n", bug->function, bug->file, bug->line); xmon(regs); #endif /* CONFIG_XMON */ - printk(KERN_CRIT "kernel BUG in %s at %s:%d!\n", + printk(KERN_CRIT "kernel BUG in %s at %s:%ld!\n", bug->function, bug->file, bug->line); return 0; diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig index 76f4476..d883791 100644 --- a/arch/ppc/platforms/4xx/Kconfig +++ b/arch/ppc/platforms/4xx/Kconfig @@ -82,6 +82,12 @@ config LUAN help This option enables support for the IBM PPC440SP evaluation board. +config YUCCA + bool "Yucca" + select WANT_EARLY_SERIAL + help + This option enables support for the AMCC PPC440SPe evaluation board. + config OCOTEA bool "Ocotea" select WANT_EARLY_SERIAL @@ -124,9 +130,14 @@ config 440SP depends on LUAN default y +config 440SPE + bool + depends on YUCCA + default y + config 440 bool - depends on 440GP || 440SP || 440EP + depends on 440GP || 440SP || 440SPE || 440EP default y config 440A @@ -158,7 +169,7 @@ config BOOKE config IBM_OCP bool - depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT + depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT default y config XILINX_OCP @@ -168,7 +179,7 @@ config XILINX_OCP config IBM_EMAC4 bool - depends on 440GX || 440SP + depends on 440GX || 440SP || 440SPE default y config BIOS_FIXUP @@ -214,7 +225,7 @@ config EMBEDDEDBOOT config IBM_OPENBIOS bool - depends on ASH || BUBINGA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT + depends on ASH || REDWOOD_5 || REDWOOD_6 default y config PPC4xx_DMA diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile index 1dd6d7f..c9bb611 100644 --- a/arch/ppc/platforms/4xx/Makefile +++ b/arch/ppc/platforms/4xx/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_EBONY) += ebony.o obj-$(CONFIG_EP405) += ep405.o obj-$(CONFIG_BUBINGA) += bubinga.o obj-$(CONFIG_LUAN) += luan.o +obj-$(CONFIG_YUCCA) += yucca.o obj-$(CONFIG_OCOTEA) += ocotea.o obj-$(CONFIG_REDWOOD_5) += redwood5.o obj-$(CONFIG_REDWOOD_6) += redwood6.o @@ -22,6 +23,7 @@ obj-$(CONFIG_440EP) += ibm440ep.o obj-$(CONFIG_440GP) += ibm440gp.o obj-$(CONFIG_440GX) += ibm440gx.o obj-$(CONFIG_440SP) += ibm440sp.o +obj-$(CONFIG_440SPE) += ppc440spe.o obj-$(CONFIG_405EP) += ibm405ep.o obj-$(CONFIG_405GPR) += ibm405gpr.o obj-$(CONFIG_VIRTEX_II_PRO) += virtex-ii_pro.o diff --git a/arch/ppc/platforms/4xx/bubinga.c b/arch/ppc/platforms/4xx/bubinga.c index 3678abf..8110f55 100644 --- a/arch/ppc/platforms/4xx/bubinga.c +++ b/arch/ppc/platforms/4xx/bubinga.c @@ -89,7 +89,7 @@ bubinga_early_serial_map(void) * by 16. */ uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV); - uart_clock = __res.bi_pllouta_freq / uart_div; + uart_clock = __res.bi_procfreq / uart_div; /* Setup serial port access */ memset(&port, 0, sizeof(port)); diff --git a/arch/ppc/platforms/4xx/bubinga.h b/arch/ppc/platforms/4xx/bubinga.h index b1df856..b5380cf 100644 --- a/arch/ppc/platforms/4xx/bubinga.h +++ b/arch/ppc/platforms/4xx/bubinga.h @@ -1,52 +1,34 @@ /* - * Support for IBM PPC 405EP evaluation board (Bubinga). + * arch/ppc/platforms/4xx/bubinga.h * - * Author: SAW (IBM), derived from walnut.h. - * Maintained by MontaVista Software <source@mvista.com> + * Bubinga board definitions + * + * Copyright (c) 2005 DENX Software Engineering + * Stefan Roese <sr@denx.de> + * + * Based on original work by + * SAW (IBM) + * 2003 (c) MontaVista Softare Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. * - * 2003 (c) MontaVista Softare Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. */ #ifdef __KERNEL__ #ifndef __BUBINGA_H__ #define __BUBINGA_H__ -/* 405EP */ +#include <linux/config.h> #include <platforms/4xx/ibm405ep.h> - -#ifndef __ASSEMBLY__ -/* - * Data structure defining board information maintained by the boot - * ROM on IBM's evaluation board. An effort has been made to - * keep the field names consistent with the 8xx 'bd_t' board info - * structures. - */ - -typedef struct board_info { - unsigned char bi_s_version[4]; /* Version of this structure */ - unsigned char bi_r_version[30]; /* Version of the IBM ROM */ - unsigned int bi_memsize; /* DRAM installed, in bytes */ - unsigned char bi_enetaddr[2][6]; /* Local Ethernet MAC address */ unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ - unsigned int bi_intfreq; /* Processor speed, in Hz */ - unsigned int bi_busfreq; /* PLB Bus speed, in Hz */ - unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ - unsigned int bi_opb_busfreq; /* OPB Bus speed, in Hz */ - unsigned int bi_pllouta_freq; /* PLL OUTA speed, in Hz */ -} bd_t; - -/* Some 4xx parts use a different timebase frequency from the internal clock. -*/ -#define bi_tbfreq bi_intfreq - +#include <asm/ppcboot.h> /* Memory map for the Bubinga board. * Generic 4xx plus RTC. */ -extern void *bubinga_rtc_base; #define BUBINGA_RTC_PADDR ((uint)0xf0000000) #define BUBINGA_RTC_VADDR BUBINGA_RTC_PADDR #define BUBINGA_RTC_SIZE ((uint)8*1024) @@ -58,12 +40,18 @@ extern void *bubinga_rtc_base; * for typical configurations at various CPU speeds. * The base baud is calculated as (FWDA / EXT UART DIV / 16) */ -#define BASE_BAUD 0 +#define BASE_BAUD 0 -#define BUBINGA_FPGA_BASE 0xF0300000 +/* Flash */ +#define PPC40x_FPGA_BASE 0xF0300000 +#define PPC40x_FPGA_REG_OFFS 1 /* offset to flash map reg */ +#define PPC40x_FLASH_ONBD_N(x) (x & 0x02) +#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01) +#define PPC40x_FLASH_LOW 0xFFF00000 +#define PPC40x_FLASH_HIGH 0xFFF80000 +#define PPC40x_FLASH_SIZE 0x80000 -#define PPC4xx_MACHINE_NAME "IBM Bubinga" +#define PPC4xx_MACHINE_NAME "IBM Bubinga" -#endif /* !__ASSEMBLY__ */ #endif /* __BUBINGA_H__ */ #endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/ebony.h b/arch/ppc/platforms/4xx/ebony.h index d08faa4..b91ad42 100644 --- a/arch/ppc/platforms/4xx/ebony.h +++ b/arch/ppc/platforms/4xx/ebony.h @@ -24,8 +24,8 @@ #define PPC44x_EMAC0_MR0 0xE0000800 /* Where to find the MAC info */ -#define EBONY_OPENBIOS_MAC_BASE 0xfffffe0c -#define EBONY_OPENBIOS_MAC_OFFSET 0x0c +#define OPENBIOS_MAC_BASE 0xfffffe0c +#define OPENBIOS_MAC_OFFSET 0x0c /* Default clock rates for Rev. B and Rev. C silicon */ #define EBONY_440GP_RB_SYSCLK 33000000 diff --git a/arch/ppc/platforms/4xx/ppc440spe.c b/arch/ppc/platforms/4xx/ppc440spe.c new file mode 100644 index 0000000..6139a0b --- /dev/null +++ b/arch/ppc/platforms/4xx/ppc440spe.c @@ -0,0 +1,148 @@ +/* + * arch/ppc/platforms/4xx/ppc440spe.c + * + * PPC440SPe I/O descriptions + * + * Roland Dreier <rolandd@cisco.com> + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * + * Matt Porter <mporter@kernel.crashing.org> + * Copyright 2002-2005 MontaVista Software Inc. + * + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * Copyright (c) 2003, 2004 Zultys Technologies + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <linux/init.h> +#include <linux/module.h> +#include <platforms/4xx/ppc440spe.h> +#include <asm/ocp.h> +#include <asm/ppc4xx_pic.h> + +static struct ocp_func_emac_data ppc440spe_emac0_def = { + .rgmii_idx = -1, /* No RGMII */ + .rgmii_mux = -1, /* No RGMII */ + .zmii_idx = -1, /* No ZMII */ + .zmii_mux = -1, /* No ZMII */ + .mal_idx = 0, /* MAL device index */ + .mal_rx_chan = 0, /* MAL rx channel number */ + .mal_tx_chan = 0, /* MAL tx channel number */ + .wol_irq = 61, /* WOL interrupt number */ + .mdio_idx = -1, /* No shared MDIO */ + .tah_idx = -1, /* No TAH */ +}; +OCP_SYSFS_EMAC_DATA() + +static struct ocp_func_mal_data ppc440spe_mal0_def = { + .num_tx_chans = 1, /* Number of TX channels */ + .num_rx_chans = 1, /* Number of RX channels */ + .txeob_irq = 38, /* TX End Of Buffer IRQ */ + .rxeob_irq = 39, /* RX End Of Buffer IRQ */ + .txde_irq = 34, /* TX Descriptor Error IRQ */ + .rxde_irq = 35, /* RX Descriptor Error IRQ */ + .serr_irq = 33, /* MAL System Error IRQ */ + .dcr_base = DCRN_MAL_BASE /* MAL0_CFG DCR number */ +}; +OCP_SYSFS_MAL_DATA() + +static struct ocp_func_iic_data ppc440spe_iic0_def = { + .fast_mode = 0, /* Use standad mode (100Khz) */ +}; + +static struct ocp_func_iic_data ppc440spe_iic1_def = { + .fast_mode = 0, /* Use standad mode (100Khz) */ +}; +OCP_SYSFS_IIC_DATA() + +struct ocp_def core_ocp[] = { + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_16550, + .index = 0, + .paddr = PPC440SPE_UART0_ADDR, + .irq = UART0_INT, + .pm = IBM_CPM_UART0, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_16550, + .index = 1, + .paddr = PPC440SPE_UART1_ADDR, + .irq = UART1_INT, + .pm = IBM_CPM_UART1, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_16550, + .index = 2, + .paddr = PPC440SPE_UART2_ADDR, + .irq = UART2_INT, + .pm = IBM_CPM_UART2, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_IIC, + .index = 0, + .paddr = 0x00000004f0000400ULL, + .irq = 2, + .pm = IBM_CPM_IIC0, + .additions = &ppc440spe_iic0_def, + .show = &ocp_show_iic_data + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_IIC, + .index = 1, + .paddr = 0x00000004f0000500ULL, + .irq = 3, + .pm = IBM_CPM_IIC1, + .additions = &ppc440spe_iic1_def, + .show = &ocp_show_iic_data + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_GPIO, + .index = 0, + .paddr = 0x00000004f0000700ULL, + .irq = OCP_IRQ_NA, + .pm = IBM_CPM_GPIO0, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_MAL, + .paddr = OCP_PADDR_NA, + .irq = OCP_IRQ_NA, + .pm = OCP_CPM_NA, + .additions = &ppc440spe_mal0_def, + .show = &ocp_show_mal_data, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_EMAC, + .index = 0, + .paddr = 0x00000004f0000800ULL, + .irq = 60, + .pm = OCP_CPM_NA, + .additions = &ppc440spe_emac0_def, + .show = &ocp_show_emac_data, + }, + { .vendor = OCP_VENDOR_INVALID + } +}; + +/* Polarity and triggering settings for internal interrupt sources */ +struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = { + { .polarity = 0xffffffff, + .triggering = 0x010f0004, + .ext_irq_mask = 0x00000000, + }, + { .polarity = 0xffffffff, + .triggering = 0x001f8040, + .ext_irq_mask = 0x00007c30, /* IRQ6 - IRQ7, IRQ8 - IRQ12 */ + }, + { .polarity = 0xffffffff, + .triggering = 0x00000000, + .ext_irq_mask = 0x000000fc, /* IRQ0 - IRQ5 */ + }, + { .polarity = 0xffffffff, + .triggering = 0x00000000, + .ext_irq_mask = 0x00000000, + }, +}; diff --git a/arch/ppc/platforms/4xx/ppc440spe.h b/arch/ppc/platforms/4xx/ppc440spe.h new file mode 100644 index 0000000..2216846 --- /dev/null +++ b/arch/ppc/platforms/4xx/ppc440spe.h @@ -0,0 +1,66 @@ +/* + * arch/ppc/platforms/4xx/ibm440spe.h + * + * PPC440SPe definitions + * + * Roland Dreier <rolandd@cisco.com> + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * + * Matt Porter <mporter@kernel.crashing.org> + * Copyright 2004-2005 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifdef __KERNEL__ +#ifndef __PPC_PLATFORMS_PPC440SPE_H +#define __PPC_PLATFORMS_PPC440SPE_H + +#include <linux/config.h> + +#include <asm/ibm44x.h> + +/* UART */ +#define PPC440SPE_UART0_ADDR 0x00000004f0000200ULL +#define PPC440SPE_UART1_ADDR 0x00000004f0000300ULL +#define PPC440SPE_UART2_ADDR 0x00000004f0000600ULL +#define UART0_INT 0 +#define UART1_INT 1 +#define UART2_INT 37 + +/* Clock and Power Management */ +#define IBM_CPM_IIC0 0x80000000 /* IIC interface */ +#define IBM_CPM_IIC1 0x40000000 /* IIC interface */ +#define IBM_CPM_PCI 0x20000000 /* PCI bridge */ +#define IBM_CPM_CPU 0x02000000 /* processor core */ +#define IBM_CPM_DMA 0x01000000 /* DMA controller */ +#define IBM_CPM_BGO 0x00800000 /* PLB to OPB bus arbiter */ +#define IBM_CPM_BGI 0x00400000 /* OPB to PLB bridge */ +#define IBM_CPM_EBC 0x00200000 /* External Bux Controller */ +#define IBM_CPM_EBM 0x00100000 /* Ext Bus Master Interface */ +#define IBM_CPM_DMC 0x00080000 /* SDRAM peripheral controller */ +#define IBM_CPM_PLB 0x00040000 /* PLB bus arbiter */ +#define IBM_CPM_SRAM 0x00020000 /* SRAM memory controller */ +#define IBM_CPM_PPM 0x00002000 /* PLB Performance Monitor */ +#define IBM_CPM_UIC1 0x00001000 /* Universal Interrupt Controller */ +#define IBM_CPM_GPIO0 0x00000800 /* General Purpose IO (??) */ +#define IBM_CPM_GPT 0x00000400 /* General Purpose Timers */ +#define IBM_CPM_UART0 0x00000200 /* serial port 0 */ +#define IBM_CPM_UART1 0x00000100 /* serial port 1 */ +#define IBM_CPM_UART2 0x00000100 /* serial port 1 */ +#define IBM_CPM_UIC0 0x00000080 /* Universal Interrupt Controller */ +#define IBM_CPM_TMRCLK 0x00000040 /* CPU timers */ +#define IBM_CPM_EMAC0 0x00000020 /* EMAC 0 */ + +#define DFLT_IBM4xx_PM ~(IBM_CPM_UIC | IBM_CPM_UIC1 | IBM_CPM_CPU \ + | IBM_CPM_EBC | IBM_CPM_SRAM | IBM_CPM_BGO \ + | IBM_CPM_EBM | IBM_CPM_PLB | IBM_CPM_OPB \ + | IBM_CPM_TMRCLK | IBM_CPM_DMA | IBM_CPM_PCI \ + | IBM_CPM_TAHOE0 | IBM_CPM_TAHOE1 \ + | IBM_CPM_EMAC0 | IBM_CPM_EMAC1 \ + | IBM_CPM_EMAC2 | IBM_CPM_EMAC3 ) +#endif /* __PPC_PLATFORMS_PPC440SP_H */ +#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/sycamore.c b/arch/ppc/platforms/4xx/sycamore.c index d8019ee..281b4a2 100644 --- a/arch/ppc/platforms/4xx/sycamore.c +++ b/arch/ppc/platforms/4xx/sycamore.c @@ -88,9 +88,6 @@ ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) void __init sycamore_setup_arch(void) { -#define SYCAMORE_PS2_BASE 0xF0100000 -#define SYCAMORE_FPGA_BASE 0xF0300000 - void *fpga_brdc; unsigned char fpga_brdc_data; void *fpga_enable; @@ -100,7 +97,7 @@ sycamore_setup_arch(void) ppc4xx_setup_arch(); - ibm_ocp_set_emac(0, 1); + ibm_ocp_set_emac(0, 0); kb_data = ioremap(SYCAMORE_PS2_BASE, 8); if (!kb_data) { @@ -111,7 +108,7 @@ sycamore_setup_arch(void) kb_cs = kb_data + 1; - fpga_status = ioremap(SYCAMORE_FPGA_BASE, 8); + fpga_status = ioremap(PPC40x_FPGA_BASE, 8); if (!fpga_status) { printk(KERN_CRIT "sycamore_setup_arch() fpga_status ioremap failed\n"); diff --git a/arch/ppc/platforms/4xx/sycamore.h b/arch/ppc/platforms/4xx/sycamore.h index 3e7b4e2..1cd6c82 100644 --- a/arch/ppc/platforms/4xx/sycamore.h +++ b/arch/ppc/platforms/4xx/sycamore.h @@ -1,67 +1,52 @@ /* * arch/ppc/platforms/4xx/sycamore.h * - * Macros, definitions, and data structures specific to the IBM PowerPC - * 405GPr "Sycamore" evaluation board. + * Sycamore board definitions * - * Author: Armin Kuster <akuster@mvista.com> + * Copyright (c) 2005 DENX Software Engineering + * Stefan Roese <sr@denx.de> + * + * Based on original work by + * Armin Kuster <akuster@mvista.com> + * 2000 (c) MontaVista, Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. * - * 2000 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. */ #ifdef __KERNEL__ #ifndef __ASM_SYCAMORE_H__ #define __ASM_SYCAMORE_H__ +#include <linux/config.h> #include <platforms/4xx/ibm405gpr.h> +#include <asm/ppcboot.h> -#ifndef __ASSEMBLY__ -/* - * Data structure defining board information maintained by the boot - * ROM on IBM's "Sycamore" evaluation board. An effort has been made to - * keep the field names consistent with the 8xx 'bd_t' board info - * structures. - */ - -typedef struct board_info { - unsigned char bi_s_version[4]; /* Version of this structure */ - unsigned char bi_r_version[30]; /* Version of the IBM ROM */ - unsigned int bi_memsize; /* DRAM installed, in bytes */ - unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */ - unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ - unsigned int bi_intfreq; /* Processor speed, in Hz */ - unsigned int bi_busfreq; /* PLB Bus speed, in Hz */ - unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ -} bd_t; - -/* Some 4xx parts use a different timebase frequency from the internal clock. -*/ -#define bi_tbfreq bi_intfreq - - -/* Memory map for the IBM "Sycamore" 405GP evaluation board. +/* Memory map for the IBM "Sycamore" 405GPr evaluation board. * Generic 4xx plus RTC. */ -extern void *sycamore_rtc_base; #define SYCAMORE_RTC_PADDR ((uint)0xf0000000) #define SYCAMORE_RTC_VADDR SYCAMORE_RTC_PADDR -#define SYCAMORE_RTC_SIZE ((uint)8*1024) +#define SYCAMORE_RTC_SIZE ((uint)8*1024) -#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK -#define BASE_BAUD 201600 -#else #define BASE_BAUD 691200 -#endif -#define SYCAMORE_PS2_BASE 0xF0100000 -#define SYCAMORE_FPGA_BASE 0xF0300000 +#define SYCAMORE_PS2_BASE 0xF0100000 + +/* Flash */ +#define PPC40x_FPGA_BASE 0xF0300000 +#define PPC40x_FPGA_REG_OFFS 5 /* offset to flash map reg */ +#define PPC40x_FLASH_ONBD_N(x) (x & 0x02) +#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01) +#define PPC40x_FLASH_LOW 0xFFF00000 +#define PPC40x_FLASH_HIGH 0xFFF80000 +#define PPC40x_FLASH_SIZE 0x80000 #define PPC4xx_MACHINE_NAME "IBM Sycamore" -#endif /* !__ASSEMBLY__ */ #endif /* __ASM_SYCAMORE_H__ */ #endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/walnut.c b/arch/ppc/platforms/4xx/walnut.c index a33eda4..74cb331 100644 --- a/arch/ppc/platforms/4xx/walnut.c +++ b/arch/ppc/platforms/4xx/walnut.c @@ -90,7 +90,7 @@ walnut_setup_arch(void) kb_cs = kb_data + 1; - fpga_status = ioremap(WALNUT_FPGA_BASE, 8); + fpga_status = ioremap(PPC40x_FPGA_BASE, 8); if (!fpga_status) { printk(KERN_CRIT "walnut_setup_arch() fpga_status ioremap failed\n"); diff --git a/arch/ppc/platforms/4xx/walnut.h b/arch/ppc/platforms/4xx/walnut.h index 04cfbf3..dcf2691 100644 --- a/arch/ppc/platforms/4xx/walnut.h +++ b/arch/ppc/platforms/4xx/walnut.h @@ -1,72 +1,55 @@ /* * arch/ppc/platforms/4xx/walnut.h * - * Macros, definitions, and data structures specific to the IBM PowerPC - * 405GP "Walnut" evaluation board. + * Walnut board definitions * - * Authors: Grant Erickson <grant@lcse.umn.edu>, Frank Rowand - * <frank_rowand@mvista.com>, Debbie Chu <debbie_chu@mvista.com> or - * source@mvista.com + * Copyright (c) 2005 DENX Software Engineering + * Stefan Roese <sr@denx.de> * - * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu> + * Based on original work by + * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu> + * Frank Rowand <frank_rowand@mvista.com> + * Debbie Chu <debbie_chu@mvista.com> + * 2000 (c) MontaVista, Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. * - * 2000 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. */ #ifdef __KERNEL__ #ifndef __ASM_WALNUT_H__ #define __ASM_WALNUT_H__ -/* We have a 405GP core */ +#include <linux/config.h> #include <platforms/4xx/ibm405gp.h> - -#ifndef __ASSEMBLY__ -/* - * Data structure defining board information maintained by the boot - * ROM on IBM's "Walnut" evaluation board. An effort has been made to - * keep the field names consistent with the 8xx 'bd_t' board info - * structures. - */ - -typedef struct board_info { - unsigned char bi_s_version[4]; /* Version of this structure */ - unsigned char bi_r_version[30]; /* Version of the IBM ROM */ - unsigned int bi_memsize; /* DRAM installed, in bytes */ - unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */ - unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ - unsigned int bi_intfreq; /* Processor speed, in Hz */ - unsigned int bi_busfreq; /* PLB Bus speed, in Hz */ - unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ -} bd_t; - -/* Some 4xx parts use a different timebase frequency from the internal clock. -*/ -#define bi_tbfreq bi_intfreq - +#include <asm/ppcboot.h> /* Memory map for the IBM "Walnut" 405GP evaluation board. * Generic 4xx plus RTC. */ -extern void *walnut_rtc_base; #define WALNUT_RTC_PADDR ((uint)0xf0000000) #define WALNUT_RTC_VADDR WALNUT_RTC_PADDR #define WALNUT_RTC_SIZE ((uint)8*1024) -#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK -#define BASE_BAUD 201600 -#else #define BASE_BAUD 691200 -#endif #define WALNUT_PS2_BASE 0xF0100000 -#define WALNUT_FPGA_BASE 0xF0300000 + +/* Flash */ +#define PPC40x_FPGA_BASE 0xF0300000 +#define PPC40x_FPGA_REG_OFFS 5 /* offset to flash map reg */ +#define PPC40x_FLASH_ONBD_N(x) (x & 0x02) +#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01) +#define PPC40x_FLASH_LOW 0xFFF00000 +#define PPC40x_FLASH_HIGH 0xFFF80000 +#define PPC40x_FLASH_SIZE 0x80000 +#define WALNUT_FPGA_BASE PPC40x_FPGA_BASE #define PPC4xx_MACHINE_NAME "IBM Walnut" -#endif /* !__ASSEMBLY__ */ #endif /* __ASM_WALNUT_H__ */ #endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/yucca.c b/arch/ppc/platforms/4xx/yucca.c new file mode 100644 index 0000000..e60f4bd --- /dev/null +++ b/arch/ppc/platforms/4xx/yucca.c @@ -0,0 +1,395 @@ +/* + * arch/ppc/platforms/4xx/yucca.c + * + * Yucca board specific routines + * + * Roland Dreier <rolandd@cisco.com> (based on luan.c by Matt Porter) + * + * Copyright 2004-2005 MontaVista Software Inc. + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/types.h> +#include <linux/major.h> +#include <linux/blkdev.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/ide.h> +#include <linux/initrd.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/tty.h> +#include <linux/serial.h> +#include <linux/serial_core.h> + +#include <asm/system.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/dma.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/ocp.h> +#include <asm/pci-bridge.h> +#include <asm/time.h> +#include <asm/todc.h> +#include <asm/bootinfo.h> +#include <asm/ppc4xx_pic.h> +#include <asm/ppcboot.h> + +#include <syslib/ibm44x_common.h> +#include <syslib/ibm440gx_common.h> +#include <syslib/ibm440sp_common.h> +#include <syslib/ppc440spe_pcie.h> + +extern bd_t __res; + +static struct ibm44x_clocks clocks __initdata; + +static void __init +yucca_calibrate_decr(void) +{ + unsigned int freq; + + if (mfspr(SPRN_CCR1) & CCR1_TCS) + freq = YUCCA_TMR_CLK; + else + freq = clocks.cpu; + + ibm44x_calibrate_decr(freq); +} + +static int +yucca_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "vendor\t\t: AMCC\n"); + seq_printf(m, "machine\t\t: PPC440SPe EVB (Yucca)\n"); + + return 0; +} + +static enum { + HOSE_UNKNOWN, + HOSE_PCIX, + HOSE_PCIE0, + HOSE_PCIE1, + HOSE_PCIE2 +} hose_type[4]; + +static inline int +yucca_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); + + if (hose_type[hose->index] == HOSE_PCIX) { + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { 81, -1, -1, -1 }, /* IDSEL 1 - PCIX0 Slot 0 */ + }; + const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; + } else if (hose_type[hose->index] == HOSE_PCIE0) { + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { 96, 97, 98, 99 }, + }; + const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; + } else if (hose_type[hose->index] == HOSE_PCIE1) { + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { 100, 101, 102, 103 }, + }; + const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; + } else if (hose_type[hose->index] == HOSE_PCIE2) { + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { 104, 105, 106, 107 }, + }; + const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; + } + return -1; +} + +static void __init yucca_set_emacdata(void) +{ + struct ocp_def *def; + struct ocp_func_emac_data *emacdata; + + /* Set phy_map, phy_mode, and mac_addr for the EMAC */ + def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0); + emacdata = def->additions; + emacdata->phy_map = 0x00000001; /* Skip 0x00 */ + emacdata->phy_mode = PHY_MODE_GMII; + memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6); +} + +static int __init yucca_pcie_card_present(int port) +{ + void __iomem *pcie_fpga_base; + u16 reg; + + pcie_fpga_base = ioremap64(YUCCA_FPGA_REG_BASE, YUCCA_FPGA_REG_SIZE); + reg = in_be16(pcie_fpga_base + FPGA_REG1C); + iounmap(pcie_fpga_base); + + switch(port) { + case 0: return !(reg & FPGA_REG1C_PE0_PRSNT); + case 1: return !(reg & FPGA_REG1C_PE1_PRSNT); + case 2: return !(reg & FPGA_REG1C_PE2_PRSNT); + default: return 0; + } +} + +/* + * For the given slot, set rootpoint mode, send power to the slot, + * turn on the green LED and turn off the yellow LED, enable the clock + * and turn off reset. + */ +static void __init yucca_setup_pcie_fpga_rootpoint(int port) +{ + void __iomem *pcie_reg_fpga_base; + u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint; + + pcie_reg_fpga_base = ioremap64(YUCCA_FPGA_REG_BASE, YUCCA_FPGA_REG_SIZE); + + switch(port) { + case 0: + rootpoint = FPGA_REG1C_PE0_ROOTPOINT; + endpoint = 0; + power = FPGA_REG1A_PE0_PWRON; + green_led = FPGA_REG1A_PE0_GLED; + clock = FPGA_REG1A_PE0_REFCLK_ENABLE; + yellow_led = FPGA_REG1A_PE0_YLED; + reset_off = FPGA_REG1C_PE0_PERST; + break; + case 1: + rootpoint = 0; + endpoint = FPGA_REG1C_PE1_ENDPOINT; + power = FPGA_REG1A_PE1_PWRON; + green_led = FPGA_REG1A_PE1_GLED; + clock = FPGA_REG1A_PE1_REFCLK_ENABLE; + yellow_led = FPGA_REG1A_PE1_YLED; + reset_off = FPGA_REG1C_PE1_PERST; + break; + case 2: + rootpoint = 0; + endpoint = FPGA_REG1C_PE2_ENDPOINT; + power = FPGA_REG1A_PE2_PWRON; + green_led = FPGA_REG1A_PE2_GLED; + clock = FPGA_REG1A_PE2_REFCLK_ENABLE; + yellow_led = FPGA_REG1A_PE2_YLED; + reset_off = FPGA_REG1C_PE2_PERST; + break; + + default: + return; + } + + out_be16(pcie_reg_fpga_base + FPGA_REG1A, + ~(power | clock | green_led) & + (yellow_led | in_be16(pcie_reg_fpga_base + FPGA_REG1A))); + out_be16(pcie_reg_fpga_base + FPGA_REG1C, + ~(endpoint | reset_off) & + (rootpoint | in_be16(pcie_reg_fpga_base + FPGA_REG1C))); + + /* + * Leave device in reset for a while after powering on the + * slot to give it a chance to initialize. + */ + mdelay(250); + + out_be16(pcie_reg_fpga_base + FPGA_REG1C, + reset_off | in_be16(pcie_reg_fpga_base + FPGA_REG1C)); + + iounmap(pcie_reg_fpga_base); +} + +static void __init +yucca_setup_hoses(void) +{ + struct pci_controller *hose; + char name[20]; + int i; + + if (0 && ppc440spe_init_pcie()) { + printk(KERN_WARNING "PPC440SPe PCI Express initialization failed\n"); + return; + } + + for (i = 0; i <= 2; ++i) { + if (!yucca_pcie_card_present(i)) + continue; + + printk(KERN_INFO "PCIE%d: card present\n", i); + yucca_setup_pcie_fpga_rootpoint(i); + if (ppc440spe_init_pcie_rootport(i)) { + printk(KERN_WARNING "PCIE%d: initialization failed\n", i); + continue; + } + + hose = pcibios_alloc_controller(); + if (!hose) + return; + + sprintf(name, "PCIE%d host bridge", i); + pci_init_resource(&hose->io_resource, + YUCCA_PCIX_LOWER_IO, + YUCCA_PCIX_UPPER_IO, + IORESOURCE_IO, + name); + + hose->mem_space.start = YUCCA_PCIE_LOWER_MEM + + i * YUCCA_PCIE_MEM_SIZE; + hose->mem_space.end = hose->mem_space.start + + YUCCA_PCIE_MEM_SIZE - 1; + + pci_init_resource(&hose->mem_resources[0], + hose->mem_space.start, + hose->mem_space.end, + IORESOURCE_MEM, + name); + + hose->first_busno = 0; + hose->last_busno = 15; + hose_type[hose->index] = HOSE_PCIE0 + i; + + ppc440spe_setup_pcie(hose, i); + hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); + } + + ppc_md.pci_swizzle = common_swizzle; + ppc_md.pci_map_irq = yucca_map_irq; +} + +TODC_ALLOC(); + +static void __init +yucca_early_serial_map(void) +{ + struct uart_port port; + + /* Setup ioremapped serial port access */ + memset(&port, 0, sizeof(port)); + port.membase = ioremap64(PPC440SPE_UART0_ADDR, 8); + port.irq = UART0_INT; + port.uartclk = clocks.uart0; + port.regshift = 0; + port.iotype = SERIAL_IO_MEM; + port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; + port.line = 0; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 0 failed\n"); + } + + port.membase = ioremap64(PPC440SPE_UART1_ADDR, 8); + port.irq = UART1_INT; + port.uartclk = clocks.uart1; + port.line = 1; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 1 failed\n"); + } + + port.membase = ioremap64(PPC440SPE_UART2_ADDR, 8); + port.irq = UART2_INT; + port.uartclk = BASE_BAUD; + port.line = 2; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 2 failed\n"); + } +} + +static void __init +yucca_setup_arch(void) +{ + yucca_set_emacdata(); + +#if !defined(CONFIG_BDI_SWITCH) + /* + * The Abatron BDI JTAG debugger does not tolerate others + * mucking with the debug registers. + */ + mtspr(SPRN_DBCR0, (DBCR0_TDE | DBCR0_IDM)); +#endif + + /* + * Determine various clocks. + * To be completely correct we should get SysClk + * from FPGA, because it can be changed by on-board switches + * --ebs + */ + /* 440GX and 440SPe clocking is the same - rd */ + ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200); + ocp_sys_info.opb_bus_freq = clocks.opb; + + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000/HZ; + + /* Setup PCIXn host bridges */ + yucca_setup_hoses(); + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif + + yucca_early_serial_map(); + + /* Identify the system */ + printk("Yucca port (Roland Dreier <rolandd@cisco.com>)\n"); +} + +void __init platform_init(unsigned long r3, unsigned long r4, + unsigned long r5, unsigned long r6, unsigned long r7) +{ + ibm44x_platform_init(r3, r4, r5, r6, r7); + + ppc_md.setup_arch = yucca_setup_arch; + ppc_md.show_cpuinfo = yucca_show_cpuinfo; + ppc_md.find_end_of_memory = ibm440sp_find_end_of_memory; + ppc_md.get_irq = NULL; /* Set in ppc4xx_pic_init() */ + + ppc_md.calibrate_decr = yucca_calibrate_decr; +#ifdef CONFIG_KGDB + ppc_md.early_serial_map = yucca_early_serial_map; +#endif +} diff --git a/arch/ppc/platforms/4xx/yucca.h b/arch/ppc/platforms/4xx/yucca.h new file mode 100644 index 0000000..01a4afe --- /dev/null +++ b/arch/ppc/platforms/4xx/yucca.h @@ -0,0 +1,111 @@ +/* + * arch/ppc/platforms/4xx/yucca.h + * + * Yucca board definitions + * + * Roland Dreier <rolandd@cisco.com> (based on luan.h by Matt Porter) + * + * Copyright 2004-2005 MontaVista Software Inc. + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifdef __KERNEL__ +#ifndef __ASM_YUCCA_H__ +#define __ASM_YUCCA_H__ + +#include <linux/config.h> +#include <platforms/4xx/ppc440spe.h> + +/* F/W TLB mapping used in bootloader glue to reset EMAC */ +#define PPC44x_EMAC0_MR0 0xa0000800 + +/* Location of MAC addresses in PIBS image */ +#define PIBS_FLASH_BASE 0xffe00000 +#define PIBS_MAC_BASE (PIBS_FLASH_BASE+0x1b0400) + +/* External timer clock frequency */ +#define YUCCA_TMR_CLK 25000000 + +/* + * FPGA registers + */ +#define YUCCA_FPGA_REG_BASE 0x00000004e2000000ULL +#define YUCCA_FPGA_REG_SIZE 0x24 + +#define FPGA_REG1A 0x1a + +#define FPGA_REG1A_PE0_GLED 0x8000 +#define FPGA_REG1A_PE1_GLED 0x4000 +#define FPGA_REG1A_PE2_GLED 0x2000 +#define FPGA_REG1A_PE0_YLED 0x1000 +#define FPGA_REG1A_PE1_YLED 0x0800 +#define FPGA_REG1A_PE2_YLED 0x0400 +#define FPGA_REG1A_PE0_PWRON 0x0200 +#define FPGA_REG1A_PE1_PWRON 0x0100 +#define FPGA_REG1A_PE2_PWRON 0x0080 +#define FPGA_REG1A_PE0_REFCLK_ENABLE 0x0040 +#define FPGA_REG1A_PE1_REFCLK_ENABLE 0x0020 +#define FPGA_REG1A_PE2_REFCLK_ENABLE 0x0010 +#define FPGA_REG1A_PE_SPREAD0 0x0008 +#define FPGA_REG1A_PE_SPREAD1 0x0004 +#define FPGA_REG1A_PE_SELSOURCE_0 0x0002 +#define FPGA_REG1A_PE_SELSOURCE_1 0x0001 + +#define FPGA_REG1C 0x1c + +#define FPGA_REG1C_PE0_ROOTPOINT 0x8000 +#define FPGA_REG1C_PE1_ENDPOINT 0x4000 +#define FPGA_REG1C_PE2_ENDPOINT 0x2000 +#define FPGA_REG1C_PE0_PRSNT 0x1000 +#define FPGA_REG1C_PE1_PRSNT 0x0800 +#define FPGA_REG1C_PE2_PRSNT 0x0400 +#define FPGA_REG1C_PE0_WAKE 0x0080 +#define FPGA_REG1C_PE1_WAKE 0x0040 +#define FPGA_REG1C_PE2_WAKE 0x0020 +#define FPGA_REG1C_PE0_PERST 0x0010 +#define FPGA_REG1C_PE1_PERST 0x0008 +#define FPGA_REG1C_PE2_PERST 0x0004 + +/* + * Serial port defines + */ +#define RS_TABLE_SIZE 3 + +/* PIBS defined UART mappings, used before early_serial_setup */ +#define UART0_IO_BASE 0xa0000200 +#define UART1_IO_BASE 0xa0000300 +#define UART2_IO_BASE 0xa0000600 + +#define BASE_BAUD 11059200 +#define STD_UART_OP(num) \ + { 0, BASE_BAUD, 0, UART##num##_INT, \ + (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ + iomem_base: (void*)UART##num##_IO_BASE, \ + io_type: SERIAL_IO_MEM}, + +#define SERIAL_PORT_DFNS \ + STD_UART_OP(0) \ + STD_UART_OP(1) \ + STD_UART_OP(2) + +/* PCI support */ +#define YUCCA_PCIX_LOWER_IO 0x00000000 +#define YUCCA_PCIX_UPPER_IO 0x0000ffff +#define YUCCA_PCIX_LOWER_MEM 0x80000000 +#define YUCCA_PCIX_UPPER_MEM 0x8fffffff +#define YUCCA_PCIE_LOWER_MEM 0x90000000 +#define YUCCA_PCIE_MEM_SIZE 0x10000000 + +#define YUCCA_PCIX_MEM_SIZE 0x10000000 +#define YUCCA_PCIX_MEM_OFFSET 0x00000000 +#define YUCCA_PCIE_MEM_SIZE 0x10000000 +#define YUCCA_PCIE_MEM_OFFSET 0x00000000 + +#endif /* __ASM_YUCCA_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c index 79b3f53..98edc75 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.c +++ b/arch/ppc/platforms/83xx/mpc834x_sys.c @@ -51,6 +51,9 @@ #include <syslib/ppc83xx_setup.h> +static const char *GFAR_PHY_0 = "phy0:0"; +static const char *GFAR_PHY_1 = "phy0:1"; + #ifndef CONFIG_PCI unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; @@ -97,6 +100,7 @@ mpc834x_sys_setup_arch(void) bd_t *binfo = (bd_t *) __res; unsigned int freq; struct gianfar_platform_data *pdata; + struct gianfar_mdio_data *mdata; /* get the core frequency */ freq = binfo->bi_intfreq; @@ -111,24 +115,27 @@ mpc834x_sys_setup_arch(void) #endif mpc83xx_early_serial_map(); + /* setup the board related info for the MDIO bus */ + mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC83xx_MDIO); + + mdata->irq[0] = MPC83xx_IRQ_EXT1; + mdata->irq[1] = MPC83xx_IRQ_EXT2; + mdata->irq[2] = -1; + mdata->irq[31] = -1; + mdata->paddr += binfo->bi_immr_base; + /* setup the board related information for the enet controllers */ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC83xx_TSEC1); if (pdata) { pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->interruptPHY = MPC83xx_IRQ_EXT1; - pdata->phyid = 0; - /* fixup phy address */ - pdata->phy_reg_addr += binfo->bi_immr_base; + pdata->bus_id = GFAR_PHY_0; memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); } pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC83xx_TSEC2); if (pdata) { pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->interruptPHY = MPC83xx_IRQ_EXT2; - pdata->phyid = 1; - /* fixup phy address */ - pdata->phy_reg_addr += binfo->bi_immr_base; + pdata->bus_id = GFAR_PHY_1; memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); } diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c index bd3ac01..16ad092 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c @@ -45,6 +45,8 @@ #include <mm/mmu_decl.h> +#include <syslib/ppc85xx_rio.h> + #include <platforms/85xx/mpc85xx_ads_common.h> #ifndef CONFIG_PCI @@ -189,3 +191,11 @@ mpc85xx_exclude_device(u_char bus, u_char devfn) } #endif /* CONFIG_PCI */ + +#ifdef CONFIG_RAPIDIO +void platform_rio_init(void) +{ + /* 512MB RIO LAW at 0xc0000000 */ + mpc85xx_rio_setup(0xc0000000, 0x20000000); +} +#endif /* CONFIG_RAPIDIO */ diff --git a/arch/ppc/platforms/85xx/stx_gp3.c b/arch/ppc/platforms/85xx/stx_gp3.c index 1e1b85f..15ce9d0 100644 --- a/arch/ppc/platforms/85xx/stx_gp3.c +++ b/arch/ppc/platforms/85xx/stx_gp3.c @@ -37,6 +37,7 @@ #include <linux/module.h> #include <linux/fsl_devices.h> #include <linux/interrupt.h> +#include <linux/rio.h> #include <asm/system.h> #include <asm/pgtable.h> @@ -57,6 +58,7 @@ #include <syslib/cpm2_pic.h> #include <syslib/ppc85xx_common.h> +#include <syslib/ppc85xx_rio.h> unsigned char __res[sizeof(bd_t)]; @@ -273,6 +275,18 @@ int mpc85xx_exclude_device(u_char bus, u_char devfn) } #endif /* CONFIG_PCI */ +#ifdef CONFIG_RAPIDIO +void +platform_rio_init(void) +{ + /* + * The STx firmware configures the RapidIO Local Access Window + * at 0xc0000000 with a size of 512MB. + */ + mpc85xx_rio_setup(0xc0000000, 0x20000000); +} +#endif /* CONFIG_RAPIDIO */ + void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7) diff --git a/arch/ppc/platforms/85xx/stx_gp3.h b/arch/ppc/platforms/85xx/stx_gp3.h index 95fdf4b..7bcc6c3 100644 --- a/arch/ppc/platforms/85xx/stx_gp3.h +++ b/arch/ppc/platforms/85xx/stx_gp3.h @@ -21,6 +21,7 @@ #include <linux/config.h> #include <linux/init.h> +#include <linux/seq_file.h> #include <asm/ppcboot.h> #define BOARD_CCSRBAR ((uint)0xe0000000) diff --git a/arch/ppc/platforms/ev64360.c b/arch/ppc/platforms/ev64360.c index b132456..b9d844f 100644 --- a/arch/ppc/platforms/ev64360.c +++ b/arch/ppc/platforms/ev64360.c @@ -52,6 +52,8 @@ static u32 ev64360_bus_frequency; unsigned char __res[sizeof(bd_t)]; +TODC_ALLOC(); + static int __init ev64360_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) { @@ -182,6 +184,9 @@ ev64360_setup_peripherals(void) EV64360_RTC_WINDOW_BASE, EV64360_RTC_WINDOW_SIZE, 0); bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN); + TODC_INIT(TODC_TYPE_DS1501, 0, 0, + ioremap(EV64360_RTC_WINDOW_BASE, EV64360_RTC_WINDOW_SIZE), 8); + mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN, EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0); bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN); @@ -496,6 +501,13 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, ppc_md.power_off = ev64360_power_off; ppc_md.halt = ev64360_halt; ppc_md.find_end_of_memory = ev64360_find_end_of_memory; + ppc_md.init = NULL; + + ppc_md.time_init = todc_time_init; + ppc_md.set_rtc_time = todc_set_rtc_time; + ppc_md.get_rtc_time = todc_get_rtc_time; + ppc_md.nvram_read_val = todc_direct_read_val; + ppc_md.nvram_write_val = todc_direct_write_val; ppc_md.calibrate_decr = ev64360_calibrate_decr; #if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE) diff --git a/arch/ppc/platforms/pmac_pic.c b/arch/ppc/platforms/pmac_pic.c index 9f2d95e..4742bf6 100644 --- a/arch/ppc/platforms/pmac_pic.c +++ b/arch/ppc/platforms/pmac_pic.c @@ -75,6 +75,9 @@ static DEFINE_SPINLOCK(pmac_pic_lock); #define GATWICK_IRQ_POOL_SIZE 10 static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE]; +#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) +static unsigned long ppc_lost_interrupts[NR_MASK_WORDS]; + /* * Mark an irq as "lost". This is only used on the pmac * since it can lose interrupts (see pmac_set_irq_mask). diff --git a/arch/ppc/platforms/prep_setup.c b/arch/ppc/platforms/prep_setup.c index 067d7d5..4415748 100644 --- a/arch/ppc/platforms/prep_setup.c +++ b/arch/ppc/platforms/prep_setup.c @@ -61,6 +61,15 @@ #include <asm/pci-bridge.h> #include <asm/todc.h> +/* prep registers for L2 */ +#define CACHECRBA 0x80000823 /* Cache configuration register address */ +#define L2CACHE_MASK 0x03 /* Mask for 2 L2 Cache bits */ +#define L2CACHE_512KB 0x00 /* 512KB */ +#define L2CACHE_256KB 0x01 /* 256KB */ +#define L2CACHE_1MB 0x02 /* 1MB */ +#define L2CACHE_NONE 0x03 /* NONE */ +#define L2CACHE_PARITY 0x08 /* Mask for L2 Cache Parity Protected bit */ + TODC_ALLOC(); unsigned char ucSystemType; diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index b4ef15b..5b7f2b8 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_440EP) += ibm440gx_common.o obj-$(CONFIG_440GP) += ibm440gp_common.o obj-$(CONFIG_440GX) += ibm440gx_common.o obj-$(CONFIG_440SP) += ibm440gx_common.o ibm440sp_common.o +obj-$(CONFIG_440SPE) += ibm440gx_common.o ibm440sp_common.o ppc440spe_pcie.o ifeq ($(CONFIG_4xx),y) ifeq ($(CONFIG_VIRTEX_II_PRO),y) obj-$(CONFIG_40x) += xilinx_pic.o @@ -46,12 +47,14 @@ obj-$(CONFIG_BAMBOO) += pci_auto.o todc_time.o obj-$(CONFIG_CPCI690) += todc_time.o pci_auto.o obj-$(CONFIG_EBONY) += pci_auto.o todc_time.o obj-$(CONFIG_EV64260) += todc_time.o pci_auto.o +obj-$(CONFIG_EV64360) += todc_time.o obj-$(CONFIG_CHESTNUT) += mv64360_pic.o pci_auto.o obj-$(CONFIG_GEMINI) += open_pic.o obj-$(CONFIG_GT64260) += gt64260_pic.o obj-$(CONFIG_LOPEC) += pci_auto.o todc_time.o obj-$(CONFIG_HDPU) += pci_auto.o obj-$(CONFIG_LUAN) += pci_auto.o todc_time.o +obj-$(CONFIG_YUCCA) += pci_auto.o todc_time.o obj-$(CONFIG_KATANA) += pci_auto.o obj-$(CONFIG_MV64360) += mv64360_pic.o obj-$(CONFIG_MV64X60) += mv64x60.o mv64x60_win.o @@ -92,6 +95,7 @@ obj-$(CONFIG_85xx) += open_pic.o ppc85xx_common.o ppc85xx_setup.o \ ifeq ($(CONFIG_85xx),y) obj-$(CONFIG_PCI) += pci_auto.o endif +obj-$(CONFIG_RAPIDIO) += ppc85xx_rio.o obj-$(CONFIG_83xx) += ipic.o ppc83xx_setup.o ppc_sys.o \ mpc83xx_sys.o mpc83xx_devices.o ifeq ($(CONFIG_83xx),y) diff --git a/arch/ppc/syslib/ibm440sp_common.c b/arch/ppc/syslib/ibm440sp_common.c index 417d4cf..cdafda1 100644 --- a/arch/ppc/syslib/ibm440sp_common.c +++ b/arch/ppc/syslib/ibm440sp_common.c @@ -1,7 +1,7 @@ /* * arch/ppc/syslib/ibm440sp_common.c * - * PPC440SP system library + * PPC440SP/PPC440SPe system library * * Matt Porter <mporter@kernel.crashing.org> * Copyright 2002-2005 MontaVista Software Inc. @@ -35,7 +35,7 @@ unsigned long __init ibm440sp_find_end_of_memory(void) u32 mem_size = 0; /* Read two bank sizes and sum */ - for (i=0; i<2; i++) + for (i=0; i< MQ0_NUM_BANKS; i++) switch (mfdcr(DCRN_MQ0_BS0BAS + i) & MQ0_CONFIG_SIZE_MASK) { case MQ0_CONFIG_SIZE_8M: mem_size += PPC44x_MEM_SIZE_8M; diff --git a/arch/ppc/syslib/ibm44x_common.c b/arch/ppc/syslib/ibm44x_common.c index 5152c8e..71db11d 100644 --- a/arch/ppc/syslib/ibm44x_common.c +++ b/arch/ppc/syslib/ibm44x_common.c @@ -20,6 +20,7 @@ #include <linux/types.h> #include <linux/serial.h> #include <linux/module.h> +#include <linux/initrd.h> #include <asm/ibm44x.h> #include <asm/mmu.h> @@ -214,9 +215,20 @@ void __init ibm44x_platform_init(unsigned long r3, unsigned long r4, unsigned lo /* Called from machine_check_exception */ void platform_machine_check(struct pt_regs *regs) { +#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) + printk("PLB0: BEAR=0x%08x%08x ACR= 0x%08x BESR= 0x%08x%08x\n", + mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL), + mfdcr(DCRN_PLB0_ACR), mfdcr(DCRN_PLB0_BESRH), + mfdcr(DCRN_PLB0_BESRL)); + printk("PLB1: BEAR=0x%08x%08x ACR= 0x%08x BESR= 0x%08x%08x\n", + mfdcr(DCRN_PLB1_BEARH), mfdcr(DCRN_PLB1_BEARL), + mfdcr(DCRN_PLB1_ACR), mfdcr(DCRN_PLB1_BESRH), + mfdcr(DCRN_PLB1_BESRL)); +#else printk("PLB0: BEAR=0x%08x%08x ACR= 0x%08x BESR= 0x%08x\n", mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL), mfdcr(DCRN_PLB0_ACR), mfdcr(DCRN_PLB0_BESR)); +#endif printk("POB0: BEAR=0x%08x%08x BESR0=0x%08x BESR1=0x%08x\n", mfdcr(DCRN_POB0_BEARH), mfdcr(DCRN_POB0_BEARL), mfdcr(DCRN_POB0_BESR0), mfdcr(DCRN_POB0_BESR1)); diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c index 97ffbc7..1cc3abe 100644 --- a/arch/ppc/syslib/m8xx_setup.c +++ b/arch/ppc/syslib/m8xx_setup.c @@ -45,6 +45,7 @@ #include <asm/bootinfo.h> #include <asm/time.h> #include <asm/xmon.h> +#include <asm/ppc_sys.h> #include "ppc8xx_pic.h" diff --git a/arch/ppc/syslib/m8xx_wdt.c b/arch/ppc/syslib/m8xx_wdt.c index c5ac5ce..a21632d 100644 --- a/arch/ppc/syslib/m8xx_wdt.c +++ b/arch/ppc/syslib/m8xx_wdt.c @@ -14,6 +14,7 @@ #include <linux/irq.h> #include <linux/kernel.h> #include <linux/sched.h> +#include <asm/io.h> #include <asm/8xx_immap.h> #include <syslib/m8xx_wdt.h> @@ -29,8 +30,8 @@ void m8xx_wdt_reset(void) { volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR; - out_be16(imap->im_siu_conf.sc_swsr, 0x556c); /* write magic1 */ - out_be16(imap->im_siu_conf.sc_swsr, 0xaa39); /* write magic2 */ + out_be16(&imap->im_siu_conf.sc_swsr, 0x556c); /* write magic1 */ + out_be16(&imap->im_siu_conf.sc_swsr, 0xaa39); /* write magic2 */ } static irqreturn_t m8xx_wdt_interrupt(int irq, void *dev, struct pt_regs *regs) @@ -39,7 +40,7 @@ static irqreturn_t m8xx_wdt_interrupt(int irq, void *dev, struct pt_regs *regs) m8xx_wdt_reset(); - out_be16(imap->im_sit.sit_piscr, in_be16(imap->im_sit.sit_piscr | PISCR_PS)); /* clear irq */ + out_be16(&imap->im_sit.sit_piscr, in_be16(&imap->im_sit.sit_piscr) | PISCR_PS); /* clear irq */ return IRQ_HANDLED; } @@ -51,7 +52,7 @@ void __init m8xx_wdt_handler_install(bd_t * binfo) u32 sypcr; u32 pitrtclk; - sypcr = in_be32(imap->im_siu_conf.sc_sypcr); + sypcr = in_be32(&imap->im_siu_conf.sc_sypcr); if (!(sypcr & 0x04)) { printk(KERN_NOTICE "m8xx_wdt: wdt disabled (SYPCR: 0x%08X)\n", @@ -87,9 +88,9 @@ void __init m8xx_wdt_handler_install(bd_t * binfo) else pitc = pitrtclk * wdt_timeout / binfo->bi_intfreq / 2; - out_be32(imap->im_sit.sit_pitc, pitc << 16); + out_be32(&imap->im_sit.sit_pitc, pitc << 16); - out_be16(imap->im_sit.sit_piscr, (mk_int_int_mask(PIT_INTERRUPT) << 8) | PISCR_PIE | PISCR_PTE); + out_be16(&imap->im_sit.sit_piscr, (mk_int_int_mask(PIT_INTERRUPT) << 8) | PISCR_PIE | PISCR_PTE); if (setup_irq(PIT_INTERRUPT, &m8xx_wdt_irqaction)) panic("m8xx_wdt: error setting up the watchdog irq!"); diff --git a/arch/ppc/syslib/mpc83xx_devices.c b/arch/ppc/syslib/mpc83xx_devices.c index dbf8aca..f43fbf9 100644 --- a/arch/ppc/syslib/mpc83xx_devices.c +++ b/arch/ppc/syslib/mpc83xx_devices.c @@ -27,18 +27,20 @@ * what IMMRBAR is, will get fixed up by mach_mpc83xx_fixup */ +struct gianfar_mdio_data mpc83xx_mdio_pdata = { + .paddr = 0x24520, +}; + static struct gianfar_platform_data mpc83xx_tsec1_pdata = { .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | FSL_GIANFAR_DEV_HAS_MULTI_INTR, - .phy_reg_addr = 0x24000, }; static struct gianfar_platform_data mpc83xx_tsec2_pdata = { .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | FSL_GIANFAR_DEV_HAS_MULTI_INTR, - .phy_reg_addr = 0x24000, }; static struct fsl_i2c_platform_data mpc83xx_fsl_i2c1_pdata = { @@ -220,6 +222,12 @@ struct platform_device ppc_sys_platform_devices[] = { }, }, }, + [MPC83xx_MDIO] = { + .name = "fsl-gianfar_mdio", + .id = 0, + .dev.platform_data = &mpc83xx_mdio_pdata, + .num_resources = 0, + }, }; static int __init mach_mpc83xx_fixup(struct platform_device *pdev) diff --git a/arch/ppc/syslib/mpc83xx_sys.c b/arch/ppc/syslib/mpc83xx_sys.c index 29aa633..da74344 100644 --- a/arch/ppc/syslib/mpc83xx_sys.c +++ b/arch/ppc/syslib/mpc83xx_sys.c @@ -24,72 +24,72 @@ struct ppc_sys_spec ppc_sys_specs[] = { .ppc_sys_name = "8349E", .mask = 0xFFFF0000, .value = 0x80500000, - .num_devices = 8, + .num_devices = 9, .device_list = (enum ppc_sys_devices[]) { MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2, - MPC83xx_USB2_DR, MPC83xx_USB2_MPH + MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO }, }, { .ppc_sys_name = "8349", .mask = 0xFFFF0000, .value = 0x80510000, - .num_devices = 7, + .num_devices = 8, .device_list = (enum ppc_sys_devices[]) { MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, MPC83xx_IIC2, MPC83xx_DUART, - MPC83xx_USB2_DR, MPC83xx_USB2_MPH + MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO }, }, { .ppc_sys_name = "8347E", .mask = 0xFFFF0000, .value = 0x80520000, - .num_devices = 8, + .num_devices = 9, .device_list = (enum ppc_sys_devices[]) { MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2, - MPC83xx_USB2_DR, MPC83xx_USB2_MPH + MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO }, }, { .ppc_sys_name = "8347", .mask = 0xFFFF0000, .value = 0x80530000, - .num_devices = 7, + .num_devices = 8, .device_list = (enum ppc_sys_devices[]) { MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, MPC83xx_IIC2, MPC83xx_DUART, - MPC83xx_USB2_DR, MPC83xx_USB2_MPH + MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO }, }, { .ppc_sys_name = "8343E", .mask = 0xFFFF0000, .value = 0x80540000, - .num_devices = 7, + .num_devices = 8, .device_list = (enum ppc_sys_devices[]) { MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2, - MPC83xx_USB2_DR, + MPC83xx_USB2_DR, MPC83xx_MDIO }, }, { .ppc_sys_name = "8343", .mask = 0xFFFF0000, .value = 0x80550000, - .num_devices = 6, + .num_devices = 7, .device_list = (enum ppc_sys_devices[]) { MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, MPC83xx_IIC2, MPC83xx_DUART, - MPC83xx_USB2_DR, + MPC83xx_USB2_DR, MPC83xx_MDIO }, }, { /* default match */ diff --git a/arch/ppc/syslib/ppc405_pci.c b/arch/ppc/syslib/ppc405_pci.c index 81c83bf..d6d838b 100644 --- a/arch/ppc/syslib/ppc405_pci.c +++ b/arch/ppc/syslib/ppc405_pci.c @@ -89,13 +89,6 @@ ppc4xx_find_bridges(void) isa_mem_base = 0; pci_dram_offset = 0; -#if (PSR_PCI_ARBIT_EN > 1) - /* Check if running in slave mode */ - if ((mfdcr(DCRN_CHPSR) & PSR_PCI_ARBIT_EN) == 0) { - printk("Running as PCI slave, kernel PCI disabled !\n"); - return; - } -#endif /* Setup PCI32 hose */ hose_a = pcibios_alloc_controller(); if (!hose_a) diff --git a/arch/ppc/syslib/ppc440spe_pcie.c b/arch/ppc/syslib/ppc440spe_pcie.c new file mode 100644 index 0000000..1509fc1 --- /dev/null +++ b/arch/ppc/syslib/ppc440spe_pcie.c @@ -0,0 +1,442 @@ +/* + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * Roland Dreier <rolandd@cisco.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/init.h> + +#include <asm/reg.h> +#include <asm/io.h> +#include <asm/ibm44x.h> + +#include "ppc440spe_pcie.h" + +static int +pcie_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 *val) +{ + struct pci_controller *hose = bus->sysdata; + + if (PCI_SLOT(devfn) != 1) + return PCIBIOS_DEVICE_NOT_FOUND; + + offset += devfn << 12; + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + *val = in_8(hose->cfg_data + offset); + break; + case 2: + *val = in_le16(hose->cfg_data + offset); + break; + default: + *val = in_le32(hose->cfg_data + offset); + break; + } + + if (0) printk("%s: read %x(%d) @ %x\n", __func__, *val, len, offset); + + return PCIBIOS_SUCCESSFUL; +} + +static int +pcie_write_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 val) +{ + struct pci_controller *hose = bus->sysdata; + + if (PCI_SLOT(devfn) != 1) + return PCIBIOS_DEVICE_NOT_FOUND; + + offset += devfn << 12; + + switch (len) { + case 1: + out_8(hose->cfg_data + offset, val); + break; + case 2: + out_le16(hose->cfg_data + offset, val); + break; + default: + out_le32(hose->cfg_data + offset, val); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops pcie_pci_ops = +{ + .read = pcie_read_config, + .write = pcie_write_config +}; + +enum { + PTYPE_ENDPOINT = 0x0, + PTYPE_LEGACY_ENDPOINT = 0x1, + PTYPE_ROOT_PORT = 0x4, + + LNKW_X1 = 0x1, + LNKW_X4 = 0x4, + LNKW_X8 = 0x8 +}; + +static void check_error(void) +{ + u32 valPE0, valPE1, valPE2; + + /* SDR0_PEGPLLLCT1 reset */ + if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000)) { + printk(KERN_INFO "PCIE: SDR0_PEGPLLLCT1 reset error 0x%8x\n", valPE0); + } + + valPE0 = SDR_READ(PESDR0_RCSSET); + valPE1 = SDR_READ(PESDR1_RCSSET); + valPE2 = SDR_READ(PESDR2_RCSSET); + + /* SDR0_PExRCSSET rstgu */ + if ( !(valPE0 & 0x01000000) || + !(valPE1 & 0x01000000) || + !(valPE2 & 0x01000000)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstgu error\n"); + } + + /* SDR0_PExRCSSET rstdl */ + if ( !(valPE0 & 0x00010000) || + !(valPE1 & 0x00010000) || + !(valPE2 & 0x00010000)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstdl error\n"); + } + + /* SDR0_PExRCSSET rstpyn */ + if ( (valPE0 & 0x00001000) || + (valPE1 & 0x00001000) || + (valPE2 & 0x00001000)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstpyn error\n"); + } + + /* SDR0_PExRCSSET hldplb */ + if ( (valPE0 & 0x10000000) || + (valPE1 & 0x10000000) || + (valPE2 & 0x10000000)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET hldplb error\n"); + } + + /* SDR0_PExRCSSET rdy */ + if ( (valPE0 & 0x00100000) || + (valPE1 & 0x00100000) || + (valPE2 & 0x00100000)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET rdy error\n"); + } + + /* SDR0_PExRCSSET shutdown */ + if ( (valPE0 & 0x00000100) || + (valPE1 & 0x00000100) || + (valPE2 & 0x00000100)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET shutdown error\n"); + } +} + +/* + * Initialize PCI Express core as described in User Manual section 27.12.1 + */ +int ppc440spe_init_pcie(void) +{ + /* Set PLL clock receiver to LVPECL */ + SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) | 1 << 28); + + check_error(); + + printk(KERN_INFO "PCIE initialization OK\n"); + + if (!(SDR_READ(PESDR0_PLLLCT2) & 0x10000)) + printk(KERN_INFO "PESDR_PLLCT2 resistance calibration failed (0x%08x)\n", + SDR_READ(PESDR0_PLLLCT2)); + + /* De-assert reset of PCIe PLL, wait for lock */ + SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24)); + udelay(3); + + return 0; +} + +int ppc440spe_init_pcie_rootport(int port) +{ + static int core_init; + void __iomem *utl_base; + u32 val = 0; + int i; + + if (!core_init) { + ++core_init; + i = ppc440spe_init_pcie(); + if (i) + return i; + } + + /* + * Initialize various parts of the PCI Express core for our port: + * + * - Set as a root port and enable max width + * (PXIE0 -> X8, PCIE1 and PCIE2 -> X4). + * - Set up UTL configuration. + * - Increase SERDES drive strength to levels suggested by AMCC. + * - De-assert RSTPYN, RSTDL and RSTGU. + */ + switch (port) { + case 0: + SDR_WRITE(PESDR0_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X8 << 12); + + SDR_WRITE(PESDR0_UTLSET1, 0x21222222); + SDR_WRITE(PESDR0_UTLSET2, 0x11000000); + + SDR_WRITE(PESDR0_HSSL0SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL1SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL2SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL3SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000); + SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000); + + SDR_WRITE(PESDR0_RCSSET, + (SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12); + break; + + case 1: + SDR_WRITE(PESDR1_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12); + + SDR_WRITE(PESDR1_UTLSET1, 0x21222222); + SDR_WRITE(PESDR1_UTLSET2, 0x11000000); + + SDR_WRITE(PESDR1_HSSL0SET1, 0x35000000); + SDR_WRITE(PESDR1_HSSL1SET1, 0x35000000); + SDR_WRITE(PESDR1_HSSL2SET1, 0x35000000); + SDR_WRITE(PESDR1_HSSL3SET1, 0x35000000); + + SDR_WRITE(PESDR1_RCSSET, + (SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12); + break; + + case 2: + SDR_WRITE(PESDR2_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12); + + SDR_WRITE(PESDR2_UTLSET1, 0x21222222); + SDR_WRITE(PESDR2_UTLSET2, 0x11000000); + + SDR_WRITE(PESDR2_HSSL0SET1, 0x35000000); + SDR_WRITE(PESDR2_HSSL1SET1, 0x35000000); + SDR_WRITE(PESDR2_HSSL2SET1, 0x35000000); + SDR_WRITE(PESDR2_HSSL3SET1, 0x35000000); + + SDR_WRITE(PESDR2_RCSSET, + (SDR_READ(PESDR2_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12); + break; + } + + mdelay(1000); + + switch (port) { + case 0: val = SDR_READ(PESDR0_RCSSTS); break; + case 1: val = SDR_READ(PESDR1_RCSSTS); break; + case 2: val = SDR_READ(PESDR2_RCSSTS); break; + } + + if (!(val & (1 << 20))) + printk(KERN_INFO "PCIE%d: PGRST inactive\n", port); + else + printk(KERN_WARNING "PGRST for PCIE%d failed %08x\n", port, val); + + switch (port) { + case 0: printk(KERN_INFO "PCIE0: LOOP %08x\n", SDR_READ(PESDR0_LOOP)); break; + case 1: printk(KERN_INFO "PCIE1: LOOP %08x\n", SDR_READ(PESDR1_LOOP)); break; + case 2: printk(KERN_INFO "PCIE2: LOOP %08x\n", SDR_READ(PESDR2_LOOP)); break; + } + + /* + * Map UTL registers at 0xc_1000_0n00 + */ + switch (port) { + case 0: + mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x0000000c); + mtdcr(DCRN_PEGPL_REGBAL(PCIE0), 0x10000000); + mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); + mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0x68782800); + break; + + case 1: + mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x0000000c); + mtdcr(DCRN_PEGPL_REGBAL(PCIE1), 0x10001000); + mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); + mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0x68782800); + break; + + case 2: + mtdcr(DCRN_PEGPL_REGBAH(PCIE2), 0x0000000c); + mtdcr(DCRN_PEGPL_REGBAL(PCIE2), 0x10002000); + mtdcr(DCRN_PEGPL_REGMSK(PCIE2), 0x00007001); + mtdcr(DCRN_PEGPL_SPECIAL(PCIE2), 0x68782800); + } + + utl_base = ioremap64(0xc10000000ull + 0x1000 * port, 0x100); + + /* + * Set buffer allocations and then assert VRB and TXE. + */ + out_be32(utl_base + PEUTL_OUTTR, 0x08000000); + out_be32(utl_base + PEUTL_INTR, 0x02000000); + out_be32(utl_base + PEUTL_OPDBSZ, 0x10000000); + out_be32(utl_base + PEUTL_PBBSZ, 0x53000000); + out_be32(utl_base + PEUTL_IPHBSZ, 0x08000000); + out_be32(utl_base + PEUTL_IPDBSZ, 0x10000000); + out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000); + out_be32(utl_base + PEUTL_PCTL, 0x80800066); + + iounmap(utl_base); + + /* + * We map PCI Express configuration access into the 512MB regions + * PCIE0: 0xc_4000_0000 + * PCIE1: 0xc_8000_0000 + * PCIE2: 0xc_c000_0000 + */ + switch (port) { + case 0: + mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000c); + mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x40000000); + mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */ + break; + + case 1: + mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000c); + mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x80000000); + mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */ + break; + + case 2: + mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000c); + mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0xc0000000); + mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */ + break; + } + + /* + * Check for VC0 active and assert RDY. + */ + switch (port) { + case 0: + if (!(SDR_READ(PESDR0_RCSSTS) & (1 << 16))) + printk(KERN_WARNING "PCIE0: VC0 not active\n"); + SDR_WRITE(PESDR0_RCSSET, SDR_READ(PESDR0_RCSSET) | 1 << 20); + break; + case 1: + if (!(SDR_READ(PESDR1_RCSSTS) & (1 << 16))) + printk(KERN_WARNING "PCIE0: VC0 not active\n"); + SDR_WRITE(PESDR1_RCSSET, SDR_READ(PESDR1_RCSSET) | 1 << 20); + break; + case 2: + if (!(SDR_READ(PESDR2_RCSSTS) & (1 << 16))) + printk(KERN_WARNING "PCIE0: VC0 not active\n"); + SDR_WRITE(PESDR2_RCSSET, SDR_READ(PESDR2_RCSSET) | 1 << 20); + break; + } + +#if 0 + /* Dump all config regs */ + for (i = 0x300; i <= 0x320; ++i) + printk("[%04x] 0x%08x\n", i, SDR_READ(i)); + for (i = 0x340; i <= 0x353; ++i) + printk("[%04x] 0x%08x\n", i, SDR_READ(i)); + for (i = 0x370; i <= 0x383; ++i) + printk("[%04x] 0x%08x\n", i, SDR_READ(i)); + for (i = 0x3a0; i <= 0x3a2; ++i) + printk("[%04x] 0x%08x\n", i, SDR_READ(i)); + for (i = 0x3c0; i <= 0x3c3; ++i) + printk("[%04x] 0x%08x\n", i, SDR_READ(i)); +#endif + + mdelay(100); + + return 0; +} + +void ppc440spe_setup_pcie(struct pci_controller *hose, int port) +{ + void __iomem *mbase; + + /* + * Map 16MB, which is enough for 4 bits of bus # + */ + hose->cfg_data = ioremap64(0xc40000000ull + port * 0x40000000, + 1 << 24); + hose->ops = &pcie_pci_ops; + + /* + * Set bus numbers on our root port + */ + mbase = ioremap64(0xc50000000ull + port * 0x40000000, 4096); + out_8(mbase + PCI_PRIMARY_BUS, 0); + out_8(mbase + PCI_SECONDARY_BUS, 0); + + /* + * Set up outbound translation to hose->mem_space from PLB + * addresses at an offset of 0xd_0000_0000. We set the low + * bits of the mask to 11 to turn off splitting into 8 + * subregions and to enable the outbound translation. + */ + out_le32(mbase + PECFG_POM0LAH, 0); + out_le32(mbase + PECFG_POM0LAL, hose->mem_space.start); + + switch (port) { + case 0: + mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), 0x0000000d); + mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), hose->mem_space.start); + mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff); + mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0), + ~(hose->mem_space.end - hose->mem_space.start) | 3); + break; + case 1: + mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), 0x0000000d); + mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), hose->mem_space.start); + mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff); + mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1), + ~(hose->mem_space.end - hose->mem_space.start) | 3); + + break; + case 2: + mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), 0x0000000d); + mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), hose->mem_space.start); + mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff); + mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2), + ~(hose->mem_space.end - hose->mem_space.start) | 3); + break; + } + + /* Set up 16GB inbound memory window at 0 */ + out_le32(mbase + PCI_BASE_ADDRESS_0, 0); + out_le32(mbase + PCI_BASE_ADDRESS_1, 0); + out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffc); + out_le32(mbase + PECFG_BAR0LMPA, 0); + out_le32(mbase + PECFG_PIM0LAL, 0); + out_le32(mbase + PECFG_PIM0LAH, 0); + out_le32(mbase + PECFG_PIMEN, 0x1); + + /* Enable I/O, Mem, and Busmaster cycles */ + out_le16(mbase + PCI_COMMAND, + in_le16(mbase + PCI_COMMAND) | + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + + iounmap(mbase); +} diff --git a/arch/ppc/syslib/ppc440spe_pcie.h b/arch/ppc/syslib/ppc440spe_pcie.h new file mode 100644 index 0000000..55b765a --- /dev/null +++ b/arch/ppc/syslib/ppc440spe_pcie.h @@ -0,0 +1,149 @@ +/* + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * Roland Dreier <rolandd@cisco.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __PPC_SYSLIB_PPC440SPE_PCIE_H +#define __PPC_SYSLIB_PPC440SPE_PCIE_H + +#define DCRN_SDR0_CFGADDR 0x00e +#define DCRN_SDR0_CFGDATA 0x00f + +#define DCRN_PCIE0_BASE 0x100 +#define DCRN_PCIE1_BASE 0x120 +#define DCRN_PCIE2_BASE 0x140 +#define PCIE0 DCRN_PCIE0_BASE +#define PCIE1 DCRN_PCIE1_BASE +#define PCIE2 DCRN_PCIE2_BASE + +#define DCRN_PEGPL_CFGBAH(base) (base + 0x00) +#define DCRN_PEGPL_CFGBAL(base) (base + 0x01) +#define DCRN_PEGPL_CFGMSK(base) (base + 0x02) +#define DCRN_PEGPL_MSGBAH(base) (base + 0x03) +#define DCRN_PEGPL_MSGBAL(base) (base + 0x04) +#define DCRN_PEGPL_MSGMSK(base) (base + 0x05) +#define DCRN_PEGPL_OMR1BAH(base) (base + 0x06) +#define DCRN_PEGPL_OMR1BAL(base) (base + 0x07) +#define DCRN_PEGPL_OMR1MSKH(base) (base + 0x08) +#define DCRN_PEGPL_OMR1MSKL(base) (base + 0x09) +#define DCRN_PEGPL_REGBAH(base) (base + 0x12) +#define DCRN_PEGPL_REGBAL(base) (base + 0x13) +#define DCRN_PEGPL_REGMSK(base) (base + 0x14) +#define DCRN_PEGPL_SPECIAL(base) (base + 0x15) + +/* + * System DCRs (SDRs) + */ +#define PESDR0_PLLLCT1 0x03a0 +#define PESDR0_PLLLCT2 0x03a1 +#define PESDR0_PLLLCT3 0x03a2 + +#define PESDR0_UTLSET1 0x0300 +#define PESDR0_UTLSET2 0x0301 +#define PESDR0_DLPSET 0x0302 +#define PESDR0_LOOP 0x0303 +#define PESDR0_RCSSET 0x0304 +#define PESDR0_RCSSTS 0x0305 +#define PESDR0_HSSL0SET1 0x0306 +#define PESDR0_HSSL0SET2 0x0307 +#define PESDR0_HSSL0STS 0x0308 +#define PESDR0_HSSL1SET1 0x0309 +#define PESDR0_HSSL1SET2 0x030a +#define PESDR0_HSSL1STS 0x030b +#define PESDR0_HSSL2SET1 0x030c +#define PESDR0_HSSL2SET2 0x030d +#define PESDR0_HSSL2STS 0x030e +#define PESDR0_HSSL3SET1 0x030f +#define PESDR0_HSSL3SET2 0x0310 +#define PESDR0_HSSL3STS 0x0311 +#define PESDR0_HSSL4SET1 0x0312 +#define PESDR0_HSSL4SET2 0x0313 +#define PESDR0_HSSL4STS 0x0314 +#define PESDR0_HSSL5SET1 0x0315 +#define PESDR0_HSSL5SET2 0x0316 +#define PESDR0_HSSL5STS 0x0317 +#define PESDR0_HSSL6SET1 0x0318 +#define PESDR0_HSSL6SET2 0x0319 +#define PESDR0_HSSL6STS 0x031a +#define PESDR0_HSSL7SET1 0x031b +#define PESDR0_HSSL7SET2 0x031c +#define PESDR0_HSSL7STS 0x031d +#define PESDR0_HSSCTLSET 0x031e +#define PESDR0_LANE_ABCD 0x031f +#define PESDR0_LANE_EFGH 0x0320 + +#define PESDR1_UTLSET1 0x0340 +#define PESDR1_UTLSET2 0x0341 +#define PESDR1_DLPSET 0x0342 +#define PESDR1_LOOP 0x0343 +#define PESDR1_RCSSET 0x0344 +#define PESDR1_RCSSTS 0x0345 +#define PESDR1_HSSL0SET1 0x0346 +#define PESDR1_HSSL0SET2 0x0347 +#define PESDR1_HSSL0STS 0x0348 +#define PESDR1_HSSL1SET1 0x0349 +#define PESDR1_HSSL1SET2 0x034a +#define PESDR1_HSSL1STS 0x034b +#define PESDR1_HSSL2SET1 0x034c +#define PESDR1_HSSL2SET2 0x034d +#define PESDR1_HSSL2STS 0x034e +#define PESDR1_HSSL3SET1 0x034f +#define PESDR1_HSSL3SET2 0x0350 +#define PESDR1_HSSL3STS 0x0351 +#define PESDR1_HSSCTLSET 0x0352 +#define PESDR1_LANE_ABCD 0x0353 + +#define PESDR2_UTLSET1 0x0370 +#define PESDR2_UTLSET2 0x0371 +#define PESDR2_DLPSET 0x0372 +#define PESDR2_LOOP 0x0373 +#define PESDR2_RCSSET 0x0374 +#define PESDR2_RCSSTS 0x0375 +#define PESDR2_HSSL0SET1 0x0376 +#define PESDR2_HSSL0SET2 0x0377 +#define PESDR2_HSSL0STS 0x0378 +#define PESDR2_HSSL1SET1 0x0379 +#define PESDR2_HSSL1SET2 0x037a +#define PESDR2_HSSL1STS 0x037b +#define PESDR2_HSSL2SET1 0x037c +#define PESDR2_HSSL2SET2 0x037d +#define PESDR2_HSSL2STS 0x037e +#define PESDR2_HSSL3SET1 0x037f +#define PESDR2_HSSL3SET2 0x0380 +#define PESDR2_HSSL3STS 0x0381 +#define PESDR2_HSSCTLSET 0x0382 +#define PESDR2_LANE_ABCD 0x0383 + +/* + * UTL register offsets + */ +#define PEUTL_PBBSZ 0x20 +#define PEUTL_OPDBSZ 0x68 +#define PEUTL_IPHBSZ 0x70 +#define PEUTL_IPDBSZ 0x78 +#define PEUTL_OUTTR 0x90 +#define PEUTL_INTR 0x98 +#define PEUTL_PCTL 0xa0 +#define PEUTL_RCIRQEN 0xb8 + +/* + * Config space register offsets + */ +#define PECFG_BAR0LMPA 0x210 +#define PECFG_BAR0HMPA 0x214 +#define PECFG_PIMEN 0x33c +#define PECFG_PIM0LAL 0x340 +#define PECFG_PIM0LAH 0x344 +#define PECFG_POM0LAL 0x380 +#define PECFG_POM0LAH 0x384 + +int ppc440spe_init_pcie(void); +int ppc440spe_init_pcie_rootport(int port); +void ppc440spe_setup_pcie(struct pci_controller *hose, int port); + +#endif /* __PPC_SYSLIB_PPC440SPE_PCIE_H */ diff --git a/arch/ppc/syslib/ppc4xx_pic.c b/arch/ppc/syslib/ppc4xx_pic.c index 0b43563..aa41651 100644 --- a/arch/ppc/syslib/ppc4xx_pic.c +++ b/arch/ppc/syslib/ppc4xx_pic.c @@ -38,6 +38,7 @@ extern unsigned char ppc4xx_uic_ext_irq_cfg[] __attribute__ ((weak)); #define IRQ_MASK_UICx(irq) (1 << (31 - ((irq) & 0x1f))) #define IRQ_MASK_UIC1(irq) IRQ_MASK_UICx(irq) #define IRQ_MASK_UIC2(irq) IRQ_MASK_UICx(irq) +#define IRQ_MASK_UIC3(irq) IRQ_MASK_UICx(irq) #define UIC_HANDLERS(n) \ static void ppc4xx_uic##n##_enable(unsigned int irq) \ @@ -88,7 +89,38 @@ static void ppc4xx_uic##n##_end(unsigned int irq) \ .end = ppc4xx_uic##n##_end, \ } \ -#if NR_UICS == 3 +#if NR_UICS == 4 +#define ACK_UIC0_PARENT +#define ACK_UIC1_PARENT mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC); +#define ACK_UIC2_PARENT mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC2NC); +#define ACK_UIC3_PARENT mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC3NC); +UIC_HANDLERS(0); +UIC_HANDLERS(1); +UIC_HANDLERS(2); +UIC_HANDLERS(3); + +static int ppc4xx_pic_get_irq(struct pt_regs *regs) +{ + u32 uic0 = mfdcr(DCRN_UIC_MSR(UIC0)); + if (uic0 & UIC0_UIC1NC) + return 64 - ffs(mfdcr(DCRN_UIC_MSR(UIC1))); + else if (uic0 & UIC0_UIC2NC) + return 96 - ffs(mfdcr(DCRN_UIC_MSR(UIC2))); + else if (uic0 & UIC0_UIC3NC) + return 128 - ffs(mfdcr(DCRN_UIC_MSR(UIC3))); + else + return uic0 ? 32 - ffs(uic0) : -1; +} + +static void __init ppc4xx_pic_impl_init(void) +{ + /* Enable cascade interrupts in UIC0 */ + ppc_cached_irq_mask[0] |= UIC0_UIC1NC | UIC0_UIC2NC | UIC0_UIC3NC; + mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC | UIC0_UIC2NC | UIC0_UIC3NC); + mtdcr(DCRN_UIC_ER(UIC0), ppc_cached_irq_mask[0]); +} + +#elif NR_UICS == 3 #define ACK_UIC0_PARENT mtdcr(DCRN_UIC_SR(UICB), UICB_UIC0NC); #define ACK_UIC1_PARENT mtdcr(DCRN_UIC_SR(UICB), UICB_UIC1NC); #define ACK_UIC2_PARENT mtdcr(DCRN_UIC_SR(UICB), UICB_UIC2NC); @@ -170,6 +202,9 @@ static struct ppc4xx_uic_impl { { .decl = DECLARE_UIC(1), .base = UIC1 }, #if NR_UICS > 2 { .decl = DECLARE_UIC(2), .base = UIC2 }, +#if NR_UICS > 3 + { .decl = DECLARE_UIC(3), .base = UIC3 }, +#endif #endif #endif }; diff --git a/arch/ppc/syslib/ppc85xx_rio.c b/arch/ppc/syslib/ppc85xx_rio.c new file mode 100644 index 0000000..297f3b5 --- /dev/null +++ b/arch/ppc/syslib/ppc85xx_rio.c @@ -0,0 +1,938 @@ +/* + * MPC85xx RapidIO support + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter <mporter@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <linux/rio.h> +#include <linux/rio_drv.h> + +#include <asm/io.h> + +#define RIO_REGS_BASE (CCSRBAR + 0xc0000) +#define RIO_ATMU_REGS_OFFSET 0x10c00 +#define RIO_MSG_REGS_OFFSET 0x11000 +#define RIO_MAINT_WIN_SIZE 0x400000 +#define RIO_DBELL_WIN_SIZE 0x1000 + +#define RIO_MSG_OMR_MUI 0x00000002 +#define RIO_MSG_OSR_TE 0x00000080 +#define RIO_MSG_OSR_QOI 0x00000020 +#define RIO_MSG_OSR_QFI 0x00000010 +#define RIO_MSG_OSR_MUB 0x00000004 +#define RIO_MSG_OSR_EOMI 0x00000002 +#define RIO_MSG_OSR_QEI 0x00000001 + +#define RIO_MSG_IMR_MI 0x00000002 +#define RIO_MSG_ISR_TE 0x00000080 +#define RIO_MSG_ISR_QFI 0x00000010 +#define RIO_MSG_ISR_DIQI 0x00000001 + +#define RIO_MSG_DESC_SIZE 32 +#define RIO_MSG_BUFFER_SIZE 4096 +#define RIO_MIN_TX_RING_SIZE 2 +#define RIO_MAX_TX_RING_SIZE 2048 +#define RIO_MIN_RX_RING_SIZE 2 +#define RIO_MAX_RX_RING_SIZE 2048 + +#define DOORBELL_DMR_DI 0x00000002 +#define DOORBELL_DSR_TE 0x00000080 +#define DOORBELL_DSR_QFI 0x00000010 +#define DOORBELL_DSR_DIQI 0x00000001 +#define DOORBELL_TID_OFFSET 0x03 +#define DOORBELL_SID_OFFSET 0x05 +#define DOORBELL_INFO_OFFSET 0x06 + +#define DOORBELL_MESSAGE_SIZE 0x08 +#define DBELL_SID(x) (*(u8 *)(x + DOORBELL_SID_OFFSET)) +#define DBELL_TID(x) (*(u8 *)(x + DOORBELL_TID_OFFSET)) +#define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET)) + +#define is_power_of_2(x) (((x) & ((x) - 1)) == 0) + +struct rio_atmu_regs { + u32 rowtar; + u32 pad1; + u32 rowbar; + u32 pad2; + u32 rowar; + u32 pad3[3]; +}; + +struct rio_msg_regs { + u32 omr; + u32 osr; + u32 pad1; + u32 odqdpar; + u32 pad2; + u32 osar; + u32 odpr; + u32 odatr; + u32 odcr; + u32 pad3; + u32 odqepar; + u32 pad4[13]; + u32 imr; + u32 isr; + u32 pad5; + u32 ifqdpar; + u32 pad6; + u32 ifqepar; + u32 pad7[250]; + u32 dmr; + u32 dsr; + u32 pad8; + u32 dqdpar; + u32 pad9; + u32 dqepar; + u32 pad10[26]; + u32 pwmr; + u32 pwsr; + u32 pad11; + u32 pwqbar; +}; + +struct rio_tx_desc { + u32 res1; + u32 saddr; + u32 dport; + u32 dattr; + u32 res2; + u32 res3; + u32 dwcnt; + u32 res4; +}; + +static u32 regs_win; +static struct rio_atmu_regs *atmu_regs; +static struct rio_atmu_regs *maint_atmu_regs; +static struct rio_atmu_regs *dbell_atmu_regs; +static u32 dbell_win; +static u32 maint_win; +static struct rio_msg_regs *msg_regs; + +static struct rio_dbell_ring { + void *virt; + dma_addr_t phys; +} dbell_ring; + +static struct rio_msg_tx_ring { + void *virt; + dma_addr_t phys; + void *virt_buffer[RIO_MAX_TX_RING_SIZE]; + dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE]; + int tx_slot; + int size; + void *dev_id; +} msg_tx_ring; + +static struct rio_msg_rx_ring { + void *virt; + dma_addr_t phys; + void *virt_buffer[RIO_MAX_RX_RING_SIZE]; + int rx_slot; + int size; + void *dev_id; +} msg_rx_ring; + +/** + * mpc85xx_rio_doorbell_send - Send a MPC85xx doorbell message + * @index: ID of RapidIO interface + * @destid: Destination ID of target device + * @data: 16-bit info field of RapidIO doorbell message + * + * Sends a MPC85xx doorbell message. Returns %0 on success or + * %-EINVAL on failure. + */ +static int mpc85xx_rio_doorbell_send(int index, u16 destid, u16 data) +{ + pr_debug("mpc85xx_doorbell_send: index %d destid %4.4x data %4.4x\n", + index, destid, data); + out_be32((void *)&dbell_atmu_regs->rowtar, destid << 22); + out_be16((void *)(dbell_win), data); + + return 0; +} + +/** + * mpc85xx_local_config_read - Generate a MPC85xx local config space read + * @index: ID of RapdiIO interface + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @data: Value to be read into + * + * Generates a MPC85xx local configuration space read. Returns %0 on + * success or %-EINVAL on failure. + */ +static int mpc85xx_local_config_read(int index, u32 offset, int len, u32 * data) +{ + pr_debug("mpc85xx_local_config_read: index %d offset %8.8x\n", index, + offset); + *data = in_be32((void *)(regs_win + offset)); + + return 0; +} + +/** + * mpc85xx_local_config_write - Generate a MPC85xx local config space write + * @index: ID of RapdiIO interface + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @data: Value to be written + * + * Generates a MPC85xx local configuration space write. Returns %0 on + * success or %-EINVAL on failure. + */ +static int mpc85xx_local_config_write(int index, u32 offset, int len, u32 data) +{ + pr_debug + ("mpc85xx_local_config_write: index %d offset %8.8x data %8.8x\n", + index, offset, data); + out_be32((void *)(regs_win + offset), data); + + return 0; +} + +/** + * mpc85xx_rio_config_read - Generate a MPC85xx read maintenance transaction + * @index: ID of RapdiIO interface + * @destid: Destination ID of transaction + * @hopcount: Number of hops to target device + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @val: Location to be read into + * + * Generates a MPC85xx read maintenance transaction. Returns %0 on + * success or %-EINVAL on failure. + */ +static int +mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len, + u32 * val) +{ + u8 *data; + + pr_debug + ("mpc85xx_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n", + index, destid, hopcount, offset, len); + out_be32((void *)&maint_atmu_regs->rowtar, + (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9)); + + data = (u8 *) maint_win + offset; + switch (len) { + case 1: + *val = in_8((u8 *) data); + break; + case 2: + *val = in_be16((u16 *) data); + break; + default: + *val = in_be32((u32 *) data); + break; + } + + return 0; +} + +/** + * mpc85xx_rio_config_write - Generate a MPC85xx write maintenance transaction + * @index: ID of RapdiIO interface + * @destid: Destination ID of transaction + * @hopcount: Number of hops to target device + * @offset: Offset into configuration space + * @len: Length (in bytes) of the maintenance transaction + * @val: Value to be written + * + * Generates an MPC85xx write maintenance transaction. Returns %0 on + * success or %-EINVAL on failure. + */ +static int +mpc85xx_rio_config_write(int index, u16 destid, u8 hopcount, u32 offset, + int len, u32 val) +{ + u8 *data; + pr_debug + ("mpc85xx_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n", + index, destid, hopcount, offset, len, val); + out_be32((void *)&maint_atmu_regs->rowtar, + (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9)); + + data = (u8 *) maint_win + offset; + switch (len) { + case 1: + out_8((u8 *) data, val); + break; + case 2: + out_be16((u16 *) data, val); + break; + default: + out_be32((u32 *) data, val); + break; + } + + return 0; +} + +/** + * rio_hw_add_outb_message - Add message to the MPC85xx outbound message queue + * @mport: Master port with outbound message queue + * @rdev: Target of outbound message + * @mbox: Outbound mailbox + * @buffer: Message to add to outbound queue + * @len: Length of message + * + * Adds the @buffer message to the MPC85xx outbound message queue. Returns + * %0 on success or %-EINVAL on failure. + */ +int +rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox, + void *buffer, size_t len) +{ + u32 omr; + struct rio_tx_desc *desc = + (struct rio_tx_desc *)msg_tx_ring.virt + msg_tx_ring.tx_slot; + int ret = 0; + + pr_debug + ("RIO: rio_hw_add_outb_message(): destid %4.4x mbox %d buffer %8.8x len %8.8x\n", + rdev->destid, mbox, (int)buffer, len); + + if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) { + ret = -EINVAL; + goto out; + } + + /* Copy and clear rest of buffer */ + memcpy(msg_tx_ring.virt_buffer[msg_tx_ring.tx_slot], buffer, len); + if (len < (RIO_MAX_MSG_SIZE - 4)) + memset((void *)((u32) msg_tx_ring. + virt_buffer[msg_tx_ring.tx_slot] + len), 0, + RIO_MAX_MSG_SIZE - len); + + /* Set mbox field for message */ + desc->dport = mbox & 0x3; + + /* Enable EOMI interrupt, set priority, and set destid */ + desc->dattr = 0x28000000 | (rdev->destid << 2); + + /* Set transfer size aligned to next power of 2 (in double words) */ + desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len); + + /* Set snooping and source buffer address */ + desc->saddr = 0x00000004 | msg_tx_ring.phys_buffer[msg_tx_ring.tx_slot]; + + /* Increment enqueue pointer */ + omr = in_be32((void *)&msg_regs->omr); + out_be32((void *)&msg_regs->omr, omr | RIO_MSG_OMR_MUI); + + /* Go to next descriptor */ + if (++msg_tx_ring.tx_slot == msg_tx_ring.size) + msg_tx_ring.tx_slot = 0; + + out: + return ret; +} + +EXPORT_SYMBOL_GPL(rio_hw_add_outb_message); + +/** + * mpc85xx_rio_tx_handler - MPC85xx outbound message interrupt handler + * @irq: Linux interrupt number + * @dev_instance: Pointer to interrupt-specific data + * @regs: Register context + * + * Handles outbound message interrupts. Executes a register outbound + * mailbox event handler and acks the interrupt occurence. + */ +static irqreturn_t +mpc85xx_rio_tx_handler(int irq, void *dev_instance, struct pt_regs *regs) +{ + int osr; + struct rio_mport *port = (struct rio_mport *)dev_instance; + + osr = in_be32((void *)&msg_regs->osr); + + if (osr & RIO_MSG_OSR_TE) { + pr_info("RIO: outbound message transmission error\n"); + out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_TE); + goto out; + } + + if (osr & RIO_MSG_OSR_QOI) { + pr_info("RIO: outbound message queue overflow\n"); + out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_QOI); + goto out; + } + + if (osr & RIO_MSG_OSR_EOMI) { + u32 dqp = in_be32((void *)&msg_regs->odqdpar); + int slot = (dqp - msg_tx_ring.phys) >> 5; + port->outb_msg[0].mcback(port, msg_tx_ring.dev_id, -1, slot); + + /* Ack the end-of-message interrupt */ + out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_EOMI); + } + + out: + return IRQ_HANDLED; +} + +/** + * rio_open_outb_mbox - Initialize MPC85xx outbound mailbox + * @mport: Master port implementing the outbound message unit + * @dev_id: Device specific pointer to pass on event + * @mbox: Mailbox to open + * @entries: Number of entries in the outbound mailbox ring + * + * Initializes buffer ring, request the outbound message interrupt, + * and enables the outbound message unit. Returns %0 on success and + * %-EINVAL or %-ENOMEM on failure. + */ +int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries) +{ + int i, j, rc = 0; + + if ((entries < RIO_MIN_TX_RING_SIZE) || + (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) { + rc = -EINVAL; + goto out; + } + + /* Initialize shadow copy ring */ + msg_tx_ring.dev_id = dev_id; + msg_tx_ring.size = entries; + + for (i = 0; i < msg_tx_ring.size; i++) { + if (! + (msg_tx_ring.virt_buffer[i] = + dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE, + &msg_tx_ring.phys_buffer[i], + GFP_KERNEL))) { + rc = -ENOMEM; + for (j = 0; j < msg_tx_ring.size; j++) + if (msg_tx_ring.virt_buffer[j]) + dma_free_coherent(NULL, + RIO_MSG_BUFFER_SIZE, + msg_tx_ring. + virt_buffer[j], + msg_tx_ring. + phys_buffer[j]); + goto out; + } + } + + /* Initialize outbound message descriptor ring */ + if (!(msg_tx_ring.virt = dma_alloc_coherent(NULL, + msg_tx_ring.size * + RIO_MSG_DESC_SIZE, + &msg_tx_ring.phys, + GFP_KERNEL))) { + rc = -ENOMEM; + goto out_dma; + } + memset(msg_tx_ring.virt, 0, msg_tx_ring.size * RIO_MSG_DESC_SIZE); + msg_tx_ring.tx_slot = 0; + + /* Point dequeue/enqueue pointers at first entry in ring */ + out_be32((void *)&msg_regs->odqdpar, msg_tx_ring.phys); + out_be32((void *)&msg_regs->odqepar, msg_tx_ring.phys); + + /* Configure for snooping */ + out_be32((void *)&msg_regs->osar, 0x00000004); + + /* Clear interrupt status */ + out_be32((void *)&msg_regs->osr, 0x000000b3); + + /* Hook up outbound message handler */ + if ((rc = + request_irq(MPC85xx_IRQ_RIO_TX, mpc85xx_rio_tx_handler, 0, + "msg_tx", (void *)mport)) < 0) + goto out_irq; + + /* + * Configure outbound message unit + * Snooping + * Interrupts (all enabled, except QEIE) + * Chaining mode + * Disable + */ + out_be32((void *)&msg_regs->omr, 0x00100220); + + /* Set number of entries */ + out_be32((void *)&msg_regs->omr, + in_be32((void *)&msg_regs->omr) | + ((get_bitmask_order(entries) - 2) << 12)); + + /* Now enable the unit */ + out_be32((void *)&msg_regs->omr, in_be32((void *)&msg_regs->omr) | 0x1); + + out: + return rc; + + out_irq: + dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE, + msg_tx_ring.virt, msg_tx_ring.phys); + + out_dma: + for (i = 0; i < msg_tx_ring.size; i++) + dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE, + msg_tx_ring.virt_buffer[i], + msg_tx_ring.phys_buffer[i]); + + return rc; +} + +/** + * rio_close_outb_mbox - Shut down MPC85xx outbound mailbox + * @mport: Master port implementing the outbound message unit + * @mbox: Mailbox to close + * + * Disables the outbound message unit, free all buffers, and + * frees the outbound message interrupt. + */ +void rio_close_outb_mbox(struct rio_mport *mport, int mbox) +{ + /* Disable inbound message unit */ + out_be32((void *)&msg_regs->omr, 0); + + /* Free ring */ + dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE, + msg_tx_ring.virt, msg_tx_ring.phys); + + /* Free interrupt */ + free_irq(MPC85xx_IRQ_RIO_TX, (void *)mport); +} + +/** + * mpc85xx_rio_rx_handler - MPC85xx inbound message interrupt handler + * @irq: Linux interrupt number + * @dev_instance: Pointer to interrupt-specific data + * @regs: Register context + * + * Handles inbound message interrupts. Executes a registered inbound + * mailbox event handler and acks the interrupt occurence. + */ +static irqreturn_t +mpc85xx_rio_rx_handler(int irq, void *dev_instance, struct pt_regs *regs) +{ + int isr; + struct rio_mport *port = (struct rio_mport *)dev_instance; + + isr = in_be32((void *)&msg_regs->isr); + + if (isr & RIO_MSG_ISR_TE) { + pr_info("RIO: inbound message reception error\n"); + out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_TE); + goto out; + } + + /* XXX Need to check/dispatch until queue empty */ + if (isr & RIO_MSG_ISR_DIQI) { + /* + * We implement *only* mailbox 0, but can receive messages + * for any mailbox/letter to that mailbox destination. So, + * make the callback with an unknown/invalid mailbox number + * argument. + */ + port->inb_msg[0].mcback(port, msg_rx_ring.dev_id, -1, -1); + + /* Ack the queueing interrupt */ + out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_DIQI); + } + + out: + return IRQ_HANDLED; +} + +/** + * rio_open_inb_mbox - Initialize MPC85xx inbound mailbox + * @mport: Master port implementing the inbound message unit + * @dev_id: Device specific pointer to pass on event + * @mbox: Mailbox to open + * @entries: Number of entries in the inbound mailbox ring + * + * Initializes buffer ring, request the inbound message interrupt, + * and enables the inbound message unit. Returns %0 on success + * and %-EINVAL or %-ENOMEM on failure. + */ +int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries) +{ + int i, rc = 0; + + if ((entries < RIO_MIN_RX_RING_SIZE) || + (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) { + rc = -EINVAL; + goto out; + } + + /* Initialize client buffer ring */ + msg_rx_ring.dev_id = dev_id; + msg_rx_ring.size = entries; + msg_rx_ring.rx_slot = 0; + for (i = 0; i < msg_rx_ring.size; i++) + msg_rx_ring.virt_buffer[i] = NULL; + + /* Initialize inbound message ring */ + if (!(msg_rx_ring.virt = dma_alloc_coherent(NULL, + msg_rx_ring.size * + RIO_MAX_MSG_SIZE, + &msg_rx_ring.phys, + GFP_KERNEL))) { + rc = -ENOMEM; + goto out; + } + + /* Point dequeue/enqueue pointers at first entry in ring */ + out_be32((void *)&msg_regs->ifqdpar, (u32) msg_rx_ring.phys); + out_be32((void *)&msg_regs->ifqepar, (u32) msg_rx_ring.phys); + + /* Clear interrupt status */ + out_be32((void *)&msg_regs->isr, 0x00000091); + + /* Hook up inbound message handler */ + if ((rc = + request_irq(MPC85xx_IRQ_RIO_RX, mpc85xx_rio_rx_handler, 0, + "msg_rx", (void *)mport)) < 0) { + dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE, + msg_tx_ring.virt_buffer[i], + msg_tx_ring.phys_buffer[i]); + goto out; + } + + /* + * Configure inbound message unit: + * Snooping + * 4KB max message size + * Unmask all interrupt sources + * Disable + */ + out_be32((void *)&msg_regs->imr, 0x001b0060); + + /* Set number of queue entries */ + out_be32((void *)&msg_regs->imr, + in_be32((void *)&msg_regs->imr) | + ((get_bitmask_order(entries) - 2) << 12)); + + /* Now enable the unit */ + out_be32((void *)&msg_regs->imr, in_be32((void *)&msg_regs->imr) | 0x1); + + out: + return rc; +} + +/** + * rio_close_inb_mbox - Shut down MPC85xx inbound mailbox + * @mport: Master port implementing the inbound message unit + * @mbox: Mailbox to close + * + * Disables the inbound message unit, free all buffers, and + * frees the inbound message interrupt. + */ +void rio_close_inb_mbox(struct rio_mport *mport, int mbox) +{ + /* Disable inbound message unit */ + out_be32((void *)&msg_regs->imr, 0); + + /* Free ring */ + dma_free_coherent(NULL, msg_rx_ring.size * RIO_MAX_MSG_SIZE, + msg_rx_ring.virt, msg_rx_ring.phys); + + /* Free interrupt */ + free_irq(MPC85xx_IRQ_RIO_RX, (void *)mport); +} + +/** + * rio_hw_add_inb_buffer - Add buffer to the MPC85xx inbound message queue + * @mport: Master port implementing the inbound message unit + * @mbox: Inbound mailbox number + * @buf: Buffer to add to inbound queue + * + * Adds the @buf buffer to the MPC85xx inbound message queue. Returns + * %0 on success or %-EINVAL on failure. + */ +int rio_hw_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf) +{ + int rc = 0; + + pr_debug("RIO: rio_hw_add_inb_buffer(), msg_rx_ring.rx_slot %d\n", + msg_rx_ring.rx_slot); + + if (msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot]) { + printk(KERN_ERR + "RIO: error adding inbound buffer %d, buffer exists\n", + msg_rx_ring.rx_slot); + rc = -EINVAL; + goto out; + } + + msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot] = buf; + if (++msg_rx_ring.rx_slot == msg_rx_ring.size) + msg_rx_ring.rx_slot = 0; + + out: + return rc; +} + +EXPORT_SYMBOL_GPL(rio_hw_add_inb_buffer); + +/** + * rio_hw_get_inb_message - Fetch inbound message from the MPC85xx message unit + * @mport: Master port implementing the inbound message unit + * @mbox: Inbound mailbox number + * + * Gets the next available inbound message from the inbound message queue. + * A pointer to the message is returned on success or NULL on failure. + */ +void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox) +{ + u32 imr; + u32 phys_buf, virt_buf; + void *buf = NULL; + int buf_idx; + + phys_buf = in_be32((void *)&msg_regs->ifqdpar); + + /* If no more messages, then bail out */ + if (phys_buf == in_be32((void *)&msg_regs->ifqepar)) + goto out2; + + virt_buf = (u32) msg_rx_ring.virt + (phys_buf - msg_rx_ring.phys); + buf_idx = (phys_buf - msg_rx_ring.phys) / RIO_MAX_MSG_SIZE; + buf = msg_rx_ring.virt_buffer[buf_idx]; + + if (!buf) { + printk(KERN_ERR + "RIO: inbound message copy failed, no buffers\n"); + goto out1; + } + + /* Copy max message size, caller is expected to allocate that big */ + memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE); + + /* Clear the available buffer */ + msg_rx_ring.virt_buffer[buf_idx] = NULL; + + out1: + imr = in_be32((void *)&msg_regs->imr); + out_be32((void *)&msg_regs->imr, imr | RIO_MSG_IMR_MI); + + out2: + return buf; +} + +EXPORT_SYMBOL_GPL(rio_hw_get_inb_message); + +/** + * mpc85xx_rio_dbell_handler - MPC85xx doorbell interrupt handler + * @irq: Linux interrupt number + * @dev_instance: Pointer to interrupt-specific data + * @regs: Register context + * + * Handles doorbell interrupts. Parses a list of registered + * doorbell event handlers and executes a matching event handler. + */ +static irqreturn_t +mpc85xx_rio_dbell_handler(int irq, void *dev_instance, struct pt_regs *regs) +{ + int dsr; + struct rio_mport *port = (struct rio_mport *)dev_instance; + + dsr = in_be32((void *)&msg_regs->dsr); + + if (dsr & DOORBELL_DSR_TE) { + pr_info("RIO: doorbell reception error\n"); + out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_TE); + goto out; + } + + if (dsr & DOORBELL_DSR_QFI) { + pr_info("RIO: doorbell queue full\n"); + out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_QFI); + goto out; + } + + /* XXX Need to check/dispatch until queue empty */ + if (dsr & DOORBELL_DSR_DIQI) { + u32 dmsg = + (u32) dbell_ring.virt + + (in_be32((void *)&msg_regs->dqdpar) & 0xfff); + u32 dmr; + struct rio_dbell *dbell; + int found = 0; + + pr_debug + ("RIO: processing doorbell, sid %2.2x tid %2.2x info %4.4x\n", + DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg)); + + list_for_each_entry(dbell, &port->dbells, node) { + if ((dbell->res->start <= DBELL_INF(dmsg)) && + (dbell->res->end >= DBELL_INF(dmsg))) { + found = 1; + break; + } + } + if (found) { + dbell->dinb(port, dbell->dev_id, DBELL_SID(dmsg), DBELL_TID(dmsg), + DBELL_INF(dmsg)); + } else { + pr_debug + ("RIO: spurious doorbell, sid %2.2x tid %2.2x info %4.4x\n", + DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg)); + } + dmr = in_be32((void *)&msg_regs->dmr); + out_be32((void *)&msg_regs->dmr, dmr | DOORBELL_DMR_DI); + out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_DIQI); + } + + out: + return IRQ_HANDLED; +} + +/** + * mpc85xx_rio_doorbell_init - MPC85xx doorbell interface init + * @mport: Master port implementing the inbound doorbell unit + * + * Initializes doorbell unit hardware and inbound DMA buffer + * ring. Called from mpc85xx_rio_setup(). Returns %0 on success + * or %-ENOMEM on failure. + */ +static int mpc85xx_rio_doorbell_init(struct rio_mport *mport) +{ + int rc = 0; + + /* Map outbound doorbell window immediately after maintenance window */ + if (!(dbell_win = + (u32) ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE, + RIO_DBELL_WIN_SIZE))) { + printk(KERN_ERR + "RIO: unable to map outbound doorbell window\n"); + rc = -ENOMEM; + goto out; + } + + /* Initialize inbound doorbells */ + if (!(dbell_ring.virt = dma_alloc_coherent(NULL, + 512 * DOORBELL_MESSAGE_SIZE, + &dbell_ring.phys, + GFP_KERNEL))) { + printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n"); + rc = -ENOMEM; + iounmap((void *)dbell_win); + goto out; + } + + /* Point dequeue/enqueue pointers at first entry in ring */ + out_be32((void *)&msg_regs->dqdpar, (u32) dbell_ring.phys); + out_be32((void *)&msg_regs->dqepar, (u32) dbell_ring.phys); + + /* Clear interrupt status */ + out_be32((void *)&msg_regs->dsr, 0x00000091); + + /* Hook up doorbell handler */ + if ((rc = + request_irq(MPC85xx_IRQ_RIO_BELL, mpc85xx_rio_dbell_handler, 0, + "dbell_rx", (void *)mport) < 0)) { + iounmap((void *)dbell_win); + dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE, + dbell_ring.virt, dbell_ring.phys); + printk(KERN_ERR + "MPC85xx RIO: unable to request inbound doorbell irq"); + goto out; + } + + /* Configure doorbells for snooping, 512 entries, and enable */ + out_be32((void *)&msg_regs->dmr, 0x00108161); + + out: + return rc; +} + +static char *cmdline = NULL; + +static int mpc85xx_rio_get_hdid(int index) +{ + /* XXX Need to parse multiple entries in some format */ + if (!cmdline) + return -1; + + return simple_strtol(cmdline, NULL, 0); +} + +static int mpc85xx_rio_get_cmdline(char *s) +{ + if (!s) + return 0; + + cmdline = s; + return 1; +} + +__setup("riohdid=", mpc85xx_rio_get_cmdline); + +/** + * mpc85xx_rio_setup - Setup MPC85xx RapidIO interface + * @law_start: Starting physical address of RapidIO LAW + * @law_size: Size of RapidIO LAW + * + * Initializes MPC85xx RapidIO hardware interface, configures + * master port with system-specific info, and registers the + * master port with the RapidIO subsystem. + */ +void mpc85xx_rio_setup(int law_start, int law_size) +{ + struct rio_ops *ops; + struct rio_mport *port; + + ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL); + ops->lcread = mpc85xx_local_config_read; + ops->lcwrite = mpc85xx_local_config_write; + ops->cread = mpc85xx_rio_config_read; + ops->cwrite = mpc85xx_rio_config_write; + ops->dsend = mpc85xx_rio_doorbell_send; + + port = kmalloc(sizeof(struct rio_mport), GFP_KERNEL); + port->id = 0; + port->index = 0; + INIT_LIST_HEAD(&port->dbells); + port->iores.start = law_start; + port->iores.end = law_start + law_size; + port->iores.flags = IORESOURCE_MEM; + + rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff); + rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0); + rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0); + strcpy(port->name, "RIO0 mport"); + + port->ops = ops; + port->host_deviceid = mpc85xx_rio_get_hdid(port->id); + + rio_register_mport(port); + + regs_win = (u32) ioremap(RIO_REGS_BASE, 0x20000); + atmu_regs = (struct rio_atmu_regs *)(regs_win + RIO_ATMU_REGS_OFFSET); + maint_atmu_regs = atmu_regs + 1; + dbell_atmu_regs = atmu_regs + 2; + msg_regs = (struct rio_msg_regs *)(regs_win + RIO_MSG_REGS_OFFSET); + + /* Configure maintenance transaction window */ + out_be32((void *)&maint_atmu_regs->rowbar, 0x000c0000); + out_be32((void *)&maint_atmu_regs->rowar, 0x80077015); + + maint_win = (u32) ioremap(law_start, RIO_MAINT_WIN_SIZE); + + /* Configure outbound doorbell window */ + out_be32((void *)&dbell_atmu_regs->rowbar, 0x000c0400); + out_be32((void *)&dbell_atmu_regs->rowar, 0x8004200b); + mpc85xx_rio_doorbell_init(port); +} diff --git a/arch/ppc/syslib/ppc85xx_rio.h b/arch/ppc/syslib/ppc85xx_rio.h new file mode 100644 index 0000000..c0827a2 --- /dev/null +++ b/arch/ppc/syslib/ppc85xx_rio.h @@ -0,0 +1,21 @@ +/* + * MPC85xx RapidIO definitions + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter <mporter@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __PPC_SYSLIB_PPC85XX_RIO_H +#define __PPC_SYSLIB_PPC85XX_RIO_H + +#include <linux/config.h> +#include <linux/init.h> + +extern void mpc85xx_rio_setup(int law_start, int law_size); + +#endif /* __PPC_SYSLIB_PPC85XX_RIO_H */ diff --git a/arch/ppc/syslib/ppc_sys.c b/arch/ppc/syslib/ppc_sys.c index 62ee86e..603f011 100644 --- a/arch/ppc/syslib/ppc_sys.c +++ b/arch/ppc/syslib/ppc_sys.c @@ -14,6 +14,7 @@ * option) any later version. */ +#include <linux/string.h> #include <asm/ppc_sys.h> int (*ppc_sys_device_fixup) (struct platform_device * pdev); diff --git a/arch/ppc/syslib/prom.c b/arch/ppc/syslib/prom.c index 278da6e..af4deac 100644 --- a/arch/ppc/syslib/prom.c +++ b/arch/ppc/syslib/prom.c @@ -13,7 +13,6 @@ #include <linux/kernel.h> #include <linux/string.h> #include <linux/init.h> -#include <linux/version.h> #include <linux/threads.h> #include <linux/spinlock.h> #include <linux/ioport.h> @@ -1165,7 +1164,7 @@ get_property(struct device_node *np, const char *name, int *lenp) /* * Add a property to a node */ -void +int prom_add_property(struct device_node* np, struct property* prop) { struct property **next = &np->properties; @@ -1174,6 +1173,8 @@ prom_add_property(struct device_node* np, struct property* prop) while (*next) next = &(*next)->next; *next = prop; + + return 0; } /* I quickly hacked that one, check against spec ! */ @@ -1335,10 +1336,8 @@ release_OF_resource(struct device_node* node, int index) if (!res) return -ENODEV; - if (res->name) { - kfree(res->name); - res->name = NULL; - } + kfree(res->name); + res->name = NULL; release_resource(res); kfree(res); diff --git a/arch/ppc/syslib/prom_init.c b/arch/ppc/syslib/prom_init.c index 7f15136..df14422 100644 --- a/arch/ppc/syslib/prom_init.c +++ b/arch/ppc/syslib/prom_init.c @@ -9,7 +9,6 @@ #include <linux/kernel.h> #include <linux/string.h> #include <linux/init.h> -#include <linux/version.h> #include <linux/threads.h> #include <linux/spinlock.h> #include <linux/ioport.h> diff --git a/arch/ppc/xmon/xmon.c b/arch/ppc/xmon/xmon.c index 66bfaa3..2b483b4 100644 --- a/arch/ppc/xmon/xmon.c +++ b/arch/ppc/xmon/xmon.c @@ -220,8 +220,7 @@ static void get_tb(unsigned *p) p[1] = lo; } -void -xmon(struct pt_regs *excp) +int xmon(struct pt_regs *excp) { struct pt_regs regs; int msr, cmd; @@ -290,6 +289,8 @@ xmon(struct pt_regs *excp) #endif /* CONFIG_SMP */ set_msr(msr); /* restore interrupt enable */ get_tb(start_tb[smp_processor_id()]); + + return cmd != 'X'; } irqreturn_t diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig index 42677cc..c9d32db 100644 --- a/arch/ppc64/Kconfig +++ b/arch/ppc64/Kconfig @@ -47,11 +47,16 @@ config ARCH_MAY_HAVE_PC_FDC bool default y +config PPC_STD_MMU + bool + default y + # We optimistically allocate largepages from the VM, so make the limit # large enough (16MB). This badly named config option is actually # max order + 1 config FORCE_MAX_ZONEORDER int + default "9" if PPC_64K_PAGES default "13" source "init/Kconfig" @@ -89,12 +94,14 @@ config PPC_PMAC bool " Apple G5 based machines" default y select U3_DART + select GENERIC_TBSYNC config PPC_MAPLE depends on PPC_MULTIPLATFORM bool " Maple 970FX Evaluation Board" select U3_DART select MPIC_BROKEN_U3 + select GENERIC_TBSYNC default n help This option enables support for the Maple 970FX Evaluation Board. @@ -167,6 +174,16 @@ config KEXEC support. As of this writing the exact hardware interface is strongly in flux, so no good recommendation can be made. +source "drivers/cpufreq/Kconfig" + +config CPU_FREQ_PMAC64 + bool "Support for some Apple G5s" + depends on CPU_FREQ && PMAC_SMU && PPC64 + select CPU_FREQ_TABLE + help + This adds support for frequency switching on Apple iMac G5, + and some of the more recent desktop G5 machines as well. + config IBMVIO depends on PPC_PSERIES || PPC_ISERIES bool @@ -182,6 +199,9 @@ config MPIC_BROKEN_U3 depends on PPC_MAPLE default y +config GENERIC_TBSYNC + def_bool n + config PPC_PMAC64 bool depends on PPC_PMAC @@ -277,6 +297,10 @@ config HAVE_ARCH_EARLY_PFN_TO_NID def_bool y depends on NEED_MULTIPLE_NODES +config ARCH_MEMORY_PROBE + def_bool y + depends on MEMORY_HOTPLUG + # Some NUMA nodes have memory ranges that span # other nodes. Even though a pfn is valid and # between a node's start and end pfns, it may not @@ -289,6 +313,15 @@ config NODES_SPAN_OTHER_NODES def_bool y depends on NEED_MULTIPLE_NODES +config PPC_64K_PAGES + bool "64k page size" + help + This option changes the kernel logical page size to 64k. On machines + without processor support for 64k pages, the kernel will simulate + them by loading each individual 4k page on demand transparently, + while on hardware with such support, it will be used to map + normal application pages. + config SCHED_SMT bool "SMT (Hyperthreading) scheduler support" depends on SMP diff --git a/arch/ppc64/Kconfig.debug b/arch/ppc64/Kconfig.debug index f16a503..b258c93 100644 --- a/arch/ppc64/Kconfig.debug +++ b/arch/ppc64/Kconfig.debug @@ -55,10 +55,6 @@ config XMON_DEFAULT xmon is normally disabled unless booted with 'xmon=on'. Use 'xmon=off' to disable xmon init during runtime. -config PPCDBG - bool "Include PPCDBG realtime debugging" - depends on DEBUG_KERNEL - config IRQSTACKS bool "Use separate kernel stacks when processing interrupts" help diff --git a/arch/ppc64/Makefile b/arch/ppc64/Makefile index fdbd6f4..a55a82d 100644 --- a/arch/ppc64/Makefile +++ b/arch/ppc64/Makefile @@ -86,7 +86,6 @@ head-y := arch/ppc64/kernel/head.o head-y += arch/powerpc/kernel/fpu.o head-y += arch/powerpc/kernel/entry_64.o -libs-y += arch/ppc64/lib/ core-y += arch/ppc64/kernel/ arch/powerpc/kernel/ core-y += arch/powerpc/mm/ core-y += arch/powerpc/sysdev/ diff --git a/arch/ppc64/boot/addRamDisk.c b/arch/ppc64/boot/addRamDisk.c index 7f2c094..c02a999 100644 --- a/arch/ppc64/boot/addRamDisk.c +++ b/arch/ppc64/boot/addRamDisk.c @@ -5,11 +5,59 @@ #include <sys/types.h> #include <sys/stat.h> #include <string.h> +#include <elf.h> #define ElfHeaderSize (64 * 1024) #define ElfPages (ElfHeaderSize / 4096) #define KERNELBASE (0xc000000000000000) +#define _ALIGN_UP(addr,size) (((addr)+((size)-1))&(~((size)-1))) +struct addr_range { + unsigned long long addr; + unsigned long memsize; + unsigned long offset; +}; + +static int check_elf64(void *p, int size, struct addr_range *r) +{ + Elf64_Ehdr *elf64 = p; + Elf64_Phdr *elf64ph; + + if (elf64->e_ident[EI_MAG0] != ELFMAG0 || + elf64->e_ident[EI_MAG1] != ELFMAG1 || + elf64->e_ident[EI_MAG2] != ELFMAG2 || + elf64->e_ident[EI_MAG3] != ELFMAG3 || + elf64->e_ident[EI_CLASS] != ELFCLASS64 || + elf64->e_ident[EI_DATA] != ELFDATA2MSB || + elf64->e_type != ET_EXEC || elf64->e_machine != EM_PPC64) + return 0; + + if ((elf64->e_phoff + sizeof(Elf64_Phdr)) > size) + return 0; + + elf64ph = (Elf64_Phdr *) ((unsigned long)elf64 + + (unsigned long)elf64->e_phoff); + + r->memsize = (unsigned long)elf64ph->p_memsz; + r->offset = (unsigned long)elf64ph->p_offset; + r->addr = (unsigned long long)elf64ph->p_vaddr; + +#ifdef DEBUG + printf("PPC64 ELF file, ph:\n"); + printf("p_type 0x%08x\n", elf64ph->p_type); + printf("p_flags 0x%08x\n", elf64ph->p_flags); + printf("p_offset 0x%016llx\n", elf64ph->p_offset); + printf("p_vaddr 0x%016llx\n", elf64ph->p_vaddr); + printf("p_paddr 0x%016llx\n", elf64ph->p_paddr); + printf("p_filesz 0x%016llx\n", elf64ph->p_filesz); + printf("p_memsz 0x%016llx\n", elf64ph->p_memsz); + printf("p_align 0x%016llx\n", elf64ph->p_align); + printf("... skipping 0x%08lx bytes of ELF header\n", + (unsigned long)elf64ph->p_offset); +#endif + + return 64; +} void get4k(FILE *file, char *buf ) { unsigned j; @@ -34,97 +82,92 @@ void death(const char *msg, FILE *fdesc, const char *fname) int main(int argc, char **argv) { char inbuf[4096]; - FILE *ramDisk = NULL; - FILE *sysmap = NULL; - FILE *inputVmlinux = NULL; - FILE *outputVmlinux = NULL; - - unsigned i = 0; - unsigned long ramFileLen = 0; - unsigned long ramLen = 0; - unsigned long roundR = 0; - - unsigned long sysmapFileLen = 0; - unsigned long sysmapLen = 0; - unsigned long sysmapPages = 0; - char* ptr_end = NULL; - unsigned long offset_end = 0; - - unsigned long kernelLen = 0; - unsigned long actualKernelLen = 0; - unsigned long round = 0; - unsigned long roundedKernelLen = 0; - unsigned long ramStartOffs = 0; - unsigned long ramPages = 0; - unsigned long roundedKernelPages = 0; - unsigned long hvReleaseData = 0; + struct addr_range vmlinux; + FILE *ramDisk; + FILE *inputVmlinux; + FILE *outputVmlinux; + + char *rd_name, *lx_name, *out_name; + + size_t i; + unsigned long ramFileLen; + unsigned long ramLen; + unsigned long roundR; + unsigned long offset_end; + + unsigned long kernelLen; + unsigned long actualKernelLen; + unsigned long round; + unsigned long roundedKernelLen; + unsigned long ramStartOffs; + unsigned long ramPages; + unsigned long roundedKernelPages; + unsigned long hvReleaseData; u_int32_t eyeCatcher = 0xc8a5d9c4; - unsigned long naca = 0; - unsigned long xRamDisk = 0; - unsigned long xRamDiskSize = 0; - long padPages = 0; + unsigned long naca; + unsigned long xRamDisk; + unsigned long xRamDiskSize; + long padPages; if (argc < 2) { fprintf(stderr, "Name of RAM disk file missing.\n"); exit(1); } + rd_name = argv[1]; if (argc < 3) { - fprintf(stderr, "Name of System Map input file is missing.\n"); - exit(1); - } - - if (argc < 4) { fprintf(stderr, "Name of vmlinux file missing.\n"); exit(1); } + lx_name = argv[2]; - if (argc < 5) { + if (argc < 4) { fprintf(stderr, "Name of vmlinux output file missing.\n"); exit(1); } + out_name = argv[3]; - ramDisk = fopen(argv[1], "r"); + ramDisk = fopen(rd_name, "r"); if ( ! ramDisk ) { - fprintf(stderr, "RAM disk file \"%s\" failed to open.\n", argv[1]); + fprintf(stderr, "RAM disk file \"%s\" failed to open.\n", rd_name); exit(1); } - sysmap = fopen(argv[2], "r"); - if ( ! sysmap ) { - fprintf(stderr, "System Map file \"%s\" failed to open.\n", argv[2]); - exit(1); - } - - inputVmlinux = fopen(argv[3], "r"); + inputVmlinux = fopen(lx_name, "r"); if ( ! inputVmlinux ) { - fprintf(stderr, "vmlinux file \"%s\" failed to open.\n", argv[3]); + fprintf(stderr, "vmlinux file \"%s\" failed to open.\n", lx_name); exit(1); } - outputVmlinux = fopen(argv[4], "w+"); + outputVmlinux = fopen(out_name, "w+"); if ( ! outputVmlinux ) { - fprintf(stderr, "output vmlinux file \"%s\" failed to open.\n", argv[4]); + fprintf(stderr, "output vmlinux file \"%s\" failed to open.\n", out_name); exit(1); } - - - + + i = fread(inbuf, 1, sizeof(inbuf), inputVmlinux); + if (i != sizeof(inbuf)) { + fprintf(stderr, "can not read vmlinux file %s: %u\n", lx_name, i); + exit(1); + } + + i = check_elf64(inbuf, sizeof(inbuf), &vmlinux); + if (i == 0) { + fprintf(stderr, "You must have a linux kernel specified as argv[2]\n"); + exit(1); + } + /* Input Vmlinux file */ fseek(inputVmlinux, 0, SEEK_END); kernelLen = ftell(inputVmlinux); fseek(inputVmlinux, 0, SEEK_SET); - printf("kernel file size = %d\n", kernelLen); - if ( kernelLen == 0 ) { - fprintf(stderr, "You must have a linux kernel specified as argv[3]\n"); - exit(1); - } + printf("kernel file size = %lu\n", kernelLen); actualKernelLen = kernelLen - ElfHeaderSize; - printf("actual kernel length (minus ELF header) = %d\n", actualKernelLen); + printf("actual kernel length (minus ELF header) = %lu\n", actualKernelLen); round = actualKernelLen % 4096; roundedKernelLen = actualKernelLen; @@ -134,39 +177,7 @@ int main(int argc, char **argv) roundedKernelPages = roundedKernelLen / 4096; printf("Vmlinux pages to copy = %ld/0x%lx \n", roundedKernelPages, roundedKernelPages); - - - /* Input System Map file */ - /* (needs to be processed simply to determine if we need to add pad pages due to the static variables not being included in the vmlinux) */ - fseek(sysmap, 0, SEEK_END); - sysmapFileLen = ftell(sysmap); - fseek(sysmap, 0, SEEK_SET); - printf("%s file size = %ld/0x%lx \n", argv[2], sysmapFileLen, sysmapFileLen); - - sysmapLen = sysmapFileLen; - - roundR = 4096 - (sysmapLen % 4096); - if (roundR) { - printf("Rounding System Map file up to a multiple of 4096, adding %ld/0x%lx \n", roundR, roundR); - sysmapLen += roundR; - } - printf("Rounded System Map size is %ld/0x%lx \n", sysmapLen, sysmapLen); - - /* Process the Sysmap file to determine where _end is */ - sysmapPages = sysmapLen / 4096; - /* read the whole file line by line, expect that it doesn't fail */ - while ( fgets(inbuf, 4096, sysmap) ) ; - /* search for _end in the last page of the system map */ - ptr_end = strstr(inbuf, " _end"); - if (!ptr_end) { - fprintf(stderr, "Unable to find _end in the sysmap file \n"); - fprintf(stderr, "inbuf: \n"); - fprintf(stderr, "%s \n", inbuf); - exit(1); - } - printf("Found _end in the last page of the sysmap - backing up 10 characters it looks like %s", ptr_end-10); - /* convert address of _end in system map to hex offset. */ - offset_end = (unsigned int)strtol(ptr_end-10, NULL, 16); + offset_end = _ALIGN_UP(vmlinux.memsize, 4096); /* calc how many pages we need to insert between the vmlinux and the start of the ram disk */ padPages = offset_end/4096 - roundedKernelPages; @@ -194,7 +205,7 @@ int main(int argc, char **argv) fseek(ramDisk, 0, SEEK_END); ramFileLen = ftell(ramDisk); fseek(ramDisk, 0, SEEK_SET); - printf("%s file size = %ld/0x%lx \n", argv[1], ramFileLen, ramFileLen); + printf("%s file size = %ld/0x%lx \n", rd_name, ramFileLen, ramFileLen); ramLen = ramFileLen; @@ -248,19 +259,19 @@ int main(int argc, char **argv) /* fseek to the hvReleaseData pointer */ fseek(outputVmlinux, ElfHeaderSize + 0x24, SEEK_SET); if (fread(&hvReleaseData, 4, 1, outputVmlinux) != 1) { - death("Could not read hvReleaseData pointer\n", outputVmlinux, argv[4]); + death("Could not read hvReleaseData pointer\n", outputVmlinux, out_name); } hvReleaseData = ntohl(hvReleaseData); /* Convert to native int */ - printf("hvReleaseData is at %08x\n", hvReleaseData); + printf("hvReleaseData is at %08lx\n", hvReleaseData); /* fseek to the hvReleaseData */ fseek(outputVmlinux, ElfHeaderSize + hvReleaseData, SEEK_SET); if (fread(inbuf, 0x40, 1, outputVmlinux) != 1) { - death("Could not read hvReleaseData\n", outputVmlinux, argv[4]); + death("Could not read hvReleaseData\n", outputVmlinux, out_name); } /* Check hvReleaseData sanity */ if (memcmp(inbuf, &eyeCatcher, 4) != 0) { - death("hvReleaseData is invalid\n", outputVmlinux, argv[4]); + death("hvReleaseData is invalid\n", outputVmlinux, out_name); } /* Get the naca pointer */ naca = ntohl(*((u_int32_t*) &inbuf[0x0C])) - KERNELBASE; @@ -269,13 +280,13 @@ int main(int argc, char **argv) /* fseek to the naca */ fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET); if (fread(inbuf, 0x18, 1, outputVmlinux) != 1) { - death("Could not read naca\n", outputVmlinux, argv[4]); + death("Could not read naca\n", outputVmlinux, out_name); } xRamDisk = ntohl(*((u_int32_t *) &inbuf[0x0c])); xRamDiskSize = ntohl(*((u_int32_t *) &inbuf[0x14])); /* Make sure a RAM disk isn't already present */ if ((xRamDisk != 0) || (xRamDiskSize != 0)) { - death("RAM disk is already attached to this kernel\n", outputVmlinux, argv[4]); + death("RAM disk is already attached to this kernel\n", outputVmlinux, out_name); } /* Fill in the values */ *((u_int32_t *) &inbuf[0x0c]) = htonl(ramStartOffs); @@ -285,15 +296,15 @@ int main(int argc, char **argv) fflush(outputVmlinux); fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET); if (fwrite(inbuf, 0x18, 1, outputVmlinux) != 1) { - death("Could not write naca\n", outputVmlinux, argv[4]); + death("Could not write naca\n", outputVmlinux, out_name); } - printf("Ram Disk of 0x%lx pages is attached to the kernel at offset 0x%08x\n", + printf("Ram Disk of 0x%lx pages is attached to the kernel at offset 0x%08lx\n", ramPages, ramStartOffs); /* Done */ fclose(outputVmlinux); /* Set permission to executable */ - chmod(argv[4], S_IRUSR|S_IWUSR|S_IXUSR|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH); + chmod(out_name, S_IRUSR|S_IWUSR|S_IXUSR|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH); return 0; } diff --git a/arch/ppc64/boot/main.c b/arch/ppc64/boot/main.c index c1dc876..e0dde24 100644 --- a/arch/ppc64/boot/main.c +++ b/arch/ppc64/boot/main.c @@ -203,8 +203,15 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) if (elf64ph->p_type == PT_LOAD && elf64ph->p_offset != 0) break; } - vmlinux.size = (unsigned long)elf64ph->p_filesz; - vmlinux.memsize = (unsigned long)elf64ph->p_memsz; + vmlinux.size = (unsigned long)elf64ph->p_filesz + + (unsigned long)elf64ph->p_offset; + /* We need to claim the memsize plus the file offset since gzip + * will expand the header (file offset), then the kernel, then + * possible rubbish we don't care about. But the kernel bss must + * be claimed (it will be zero'd by the kernel itself) + */ + vmlinux.memsize = (unsigned long)elf64ph->p_memsz + + (unsigned long)elf64ph->p_offset; printf("Allocating 0x%lx bytes for kernel ...\n\r", vmlinux.memsize); vmlinux.addr = try_claim(vmlinux.memsize); if (vmlinux.addr == 0) { diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile index 327c08c..58b19f1 100644 --- a/arch/ppc64/kernel/Makefile +++ b/arch/ppc64/kernel/Makefile @@ -11,13 +11,11 @@ obj-y := misc.o prom.o endif -obj-y += irq.o idle.o dma.o \ - signal.o \ - align.o bitops.o pacaData.o \ - udbg.o ioctl32.o \ +obj-y += idle.o dma.o \ + align.o \ + udbg.o \ rtc.o \ - cpu_setup_power4.o \ - iommu.o sysfs.o vdso.o firmware.o + iommu.o vdso.o obj-y += vdso32/ vdso64/ pci-obj-$(CONFIG_PPC_MULTIPLATFORM) += pci_dn.o pci_direct_iommu.o @@ -29,24 +27,13 @@ ifneq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o endif -obj-$(CONFIG_PPC_PSERIES) += rtasd.o udbg_16550.o - -obj-$(CONFIG_PPC_BPA) += bpa_setup.o bpa_iommu.o bpa_nvram.o \ - bpa_iic.o spider-pic.o +obj-$(CONFIG_PPC_PSERIES) += udbg_16550.o obj-$(CONFIG_KEXEC) += machine_kexec.o -obj-$(CONFIG_EEH) += eeh.o -obj-$(CONFIG_PROC_FS) += proc_ppc64.o -obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o -obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_MODULES) += module.o ifneq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_MODULES) += ppc_ksyms.o endif -obj-$(CONFIG_PPC_RTAS) += rtas_pci.o -obj-$(CONFIG_RTAS_PROC) += rtas-proc.o -obj-$(CONFIG_SCANLOG) += scanlog.o -obj-$(CONFIG_LPARCFG) += lparcfg.o obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o ifneq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_BOOTX_TEXT) += btext.o @@ -57,15 +44,8 @@ obj-$(CONFIG_PPC_PMAC) += udbg_scc.o obj-$(CONFIG_PPC_MAPLE) += udbg_16550.o -ifdef CONFIG_SMP -obj-$(CONFIG_PPC_PMAC) += smp-tbsync.o -obj-$(CONFIG_PPC_MAPLE) += smp-tbsync.o -endif - obj-$(CONFIG_KPROBES) += kprobes.o -CFLAGS_ioctl32.o += -Ifs/ - ifneq ($(CONFIG_PPC_MERGE),y) ifeq ($(CONFIG_PPC_ISERIES),y) arch/ppc64/kernel/head.o: arch/powerpc/kernel/lparmap.s diff --git a/arch/ppc64/kernel/asm-offsets.c b/arch/ppc64/kernel/asm-offsets.c index 5e6046c..84ab5c1 100644 --- a/arch/ppc64/kernel/asm-offsets.c +++ b/arch/ppc64/kernel/asm-offsets.c @@ -31,7 +31,7 @@ #include <asm/paca.h> #include <asm/lppaca.h> -#include <asm/iSeries/HvLpEvent.h> +#include <asm/iseries/hv_lp_event.h> #include <asm/rtas.h> #include <asm/cputable.h> #include <asm/cache.h> @@ -74,7 +74,6 @@ int main(void) DEFINE(ICACHEL1LINESIZE, offsetof(struct ppc64_caches, iline_size)); DEFINE(ICACHEL1LOGLINESIZE, offsetof(struct ppc64_caches, log_iline_size)); DEFINE(ICACHEL1LINESPERPAGE, offsetof(struct ppc64_caches, ilines_per_page)); - DEFINE(PLATFORM, offsetof(struct systemcfg, platform)); DEFINE(PLATFORM_LPAR, PLATFORM_LPAR); /* paca */ @@ -93,6 +92,9 @@ int main(void) DEFINE(PACASLBCACHE, offsetof(struct paca_struct, slb_cache)); DEFINE(PACASLBCACHEPTR, offsetof(struct paca_struct, slb_cache_ptr)); DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id)); +#ifdef CONFIG_PPC_64K_PAGES + DEFINE(PACAPGDIR, offsetof(struct paca_struct, pgdir)); +#endif #ifdef CONFIG_HUGETLB_PAGE DEFINE(PACALOWHTLBAREAS, offsetof(struct paca_struct, context.low_htlb_areas)); DEFINE(PACAHIGHHTLBAREAS, offsetof(struct paca_struct, context.high_htlb_areas)); diff --git a/arch/ppc64/kernel/head.S b/arch/ppc64/kernel/head.S index 929f9f4..1c869ea 100644 --- a/arch/ppc64/kernel/head.S +++ b/arch/ppc64/kernel/head.S @@ -28,14 +28,13 @@ #include <asm/processor.h> #include <asm/page.h> #include <asm/mmu.h> -#include <asm/systemcfg.h> #include <asm/ppc_asm.h> #include <asm/asm-offsets.h> #include <asm/bug.h> #include <asm/cputable.h> #include <asm/setup.h> #include <asm/hvcall.h> -#include <asm/iSeries/LparMap.h> +#include <asm/iseries/lpar_map.h> #include <asm/thread_info.h> #ifdef CONFIG_PPC_ISERIES @@ -195,11 +194,11 @@ exception_marker: #define EX_R12 24 #define EX_R13 32 #define EX_SRR0 40 -#define EX_R3 40 /* SLB miss saves R3, but not SRR0 */ #define EX_DAR 48 -#define EX_LR 48 /* SLB miss saves LR, but not DAR */ #define EX_DSISR 56 #define EX_CCR 60 +#define EX_R3 64 +#define EX_LR 72 #define EXCEPTION_PROLOG_PSERIES(area, label) \ mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ @@ -419,17 +418,22 @@ data_access_slb_pSeries: mtspr SPRN_SPRG1,r13 RUNLATCH_ON(r13) mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ + std r3,PACA_EXSLB+EX_R3(r13) + mfspr r3,SPRN_DAR std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */ + mfcr r9 +#ifdef __DISABLED__ + /* Keep that around for when we re-implement dynamic VSIDs */ + cmpdi r3,0 + bge slb_miss_user_pseries +#endif /* __DISABLED__ */ std r10,PACA_EXSLB+EX_R10(r13) std r11,PACA_EXSLB+EX_R11(r13) std r12,PACA_EXSLB+EX_R12(r13) - std r3,PACA_EXSLB+EX_R3(r13) - mfspr r9,SPRN_SPRG1 - std r9,PACA_EXSLB+EX_R13(r13) - mfcr r9 + mfspr r10,SPRN_SPRG1 + std r10,PACA_EXSLB+EX_R13(r13) mfspr r12,SPRN_SRR1 /* and SRR1 */ - mfspr r3,SPRN_DAR - b .do_slb_miss /* Rel. branch works in real mode */ + b .slb_miss_realmode /* Rel. branch works in real mode */ STD_EXCEPTION_PSERIES(0x400, instruction_access) @@ -440,17 +444,22 @@ instruction_access_slb_pSeries: mtspr SPRN_SPRG1,r13 RUNLATCH_ON(r13) mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ + std r3,PACA_EXSLB+EX_R3(r13) + mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */ std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */ + mfcr r9 +#ifdef __DISABLED__ + /* Keep that around for when we re-implement dynamic VSIDs */ + cmpdi r3,0 + bge slb_miss_user_pseries +#endif /* __DISABLED__ */ std r10,PACA_EXSLB+EX_R10(r13) std r11,PACA_EXSLB+EX_R11(r13) std r12,PACA_EXSLB+EX_R12(r13) - std r3,PACA_EXSLB+EX_R3(r13) - mfspr r9,SPRN_SPRG1 - std r9,PACA_EXSLB+EX_R13(r13) - mfcr r9 + mfspr r10,SPRN_SPRG1 + std r10,PACA_EXSLB+EX_R13(r13) mfspr r12,SPRN_SRR1 /* and SRR1 */ - mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */ - b .do_slb_miss /* Rel. branch works in real mode */ + b .slb_miss_realmode /* Rel. branch works in real mode */ STD_EXCEPTION_PSERIES(0x500, hardware_interrupt) STD_EXCEPTION_PSERIES(0x600, alignment) @@ -509,6 +518,38 @@ _GLOBAL(do_stab_bolted_pSeries) EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted) /* + * We have some room here we use that to put + * the peries slb miss user trampoline code so it's reasonably + * away from slb_miss_user_common to avoid problems with rfid + * + * This is used for when the SLB miss handler has to go virtual, + * which doesn't happen for now anymore but will once we re-implement + * dynamic VSIDs for shared page tables + */ +#ifdef __DISABLED__ +slb_miss_user_pseries: + std r10,PACA_EXGEN+EX_R10(r13) + std r11,PACA_EXGEN+EX_R11(r13) + std r12,PACA_EXGEN+EX_R12(r13) + mfspr r10,SPRG1 + ld r11,PACA_EXSLB+EX_R9(r13) + ld r12,PACA_EXSLB+EX_R3(r13) + std r10,PACA_EXGEN+EX_R13(r13) + std r11,PACA_EXGEN+EX_R9(r13) + std r12,PACA_EXGEN+EX_R3(r13) + clrrdi r12,r13,32 + mfmsr r10 + mfspr r11,SRR0 /* save SRR0 */ + ori r12,r12,slb_miss_user_common@l /* virt addr of handler */ + ori r10,r10,MSR_IR|MSR_DR|MSR_RI + mtspr SRR0,r12 + mfspr r12,SRR1 /* and SRR1 */ + mtspr SRR1,r10 + rfid + b . /* prevent spec. execution */ +#endif /* __DISABLED__ */ + +/* * Vectors for the FWNMI option. Share common code. */ .globl system_reset_fwnmi @@ -559,22 +600,59 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB) .globl data_access_slb_iSeries data_access_slb_iSeries: mtspr SPRN_SPRG1,r13 /* save r13 */ - EXCEPTION_PROLOG_ISERIES_1(PACA_EXSLB) + mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ std r3,PACA_EXSLB+EX_R3(r13) - ld r12,PACALPPACA+LPPACASRR1(r13) mfspr r3,SPRN_DAR - b .do_slb_miss + std r9,PACA_EXSLB+EX_R9(r13) + mfcr r9 +#ifdef __DISABLED__ + cmpdi r3,0 + bge slb_miss_user_iseries +#endif + std r10,PACA_EXSLB+EX_R10(r13) + std r11,PACA_EXSLB+EX_R11(r13) + std r12,PACA_EXSLB+EX_R12(r13) + mfspr r10,SPRN_SPRG1 + std r10,PACA_EXSLB+EX_R13(r13) + ld r12,PACALPPACA+LPPACASRR1(r13); + b .slb_miss_realmode STD_EXCEPTION_ISERIES(0x400, instruction_access, PACA_EXGEN) .globl instruction_access_slb_iSeries instruction_access_slb_iSeries: mtspr SPRN_SPRG1,r13 /* save r13 */ - EXCEPTION_PROLOG_ISERIES_1(PACA_EXSLB) + mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ std r3,PACA_EXSLB+EX_R3(r13) - ld r12,PACALPPACA+LPPACASRR1(r13) - ld r3,PACALPPACA+LPPACASRR0(r13) - b .do_slb_miss + ld r3,PACALPPACA+LPPACASRR0(r13) /* get SRR0 value */ + std r9,PACA_EXSLB+EX_R9(r13) + mfcr r9 +#ifdef __DISABLED__ + cmpdi r3,0 + bge .slb_miss_user_iseries +#endif + std r10,PACA_EXSLB+EX_R10(r13) + std r11,PACA_EXSLB+EX_R11(r13) + std r12,PACA_EXSLB+EX_R12(r13) + mfspr r10,SPRN_SPRG1 + std r10,PACA_EXSLB+EX_R13(r13) + ld r12,PACALPPACA+LPPACASRR1(r13); + b .slb_miss_realmode + +#ifdef __DISABLED__ +slb_miss_user_iseries: + std r10,PACA_EXGEN+EX_R10(r13) + std r11,PACA_EXGEN+EX_R11(r13) + std r12,PACA_EXGEN+EX_R12(r13) + mfspr r10,SPRG1 + ld r11,PACA_EXSLB+EX_R9(r13) + ld r12,PACA_EXSLB+EX_R3(r13) + std r10,PACA_EXGEN+EX_R13(r13) + std r11,PACA_EXGEN+EX_R9(r13) + std r12,PACA_EXGEN+EX_R3(r13) + EXCEPTION_PROLOG_ISERIES_2 + b slb_miss_user_common +#endif MASKABLE_EXCEPTION_ISERIES(0x500, hardware_interrupt) STD_EXCEPTION_ISERIES(0x600, alignment, PACA_EXGEN) @@ -809,6 +887,126 @@ instruction_access_common: li r5,0x400 b .do_hash_page /* Try to handle as hpte fault */ +/* + * Here is the common SLB miss user that is used when going to virtual + * mode for SLB misses, that is currently not used + */ +#ifdef __DISABLED__ + .align 7 + .globl slb_miss_user_common +slb_miss_user_common: + mflr r10 + std r3,PACA_EXGEN+EX_DAR(r13) + stw r9,PACA_EXGEN+EX_CCR(r13) + std r10,PACA_EXGEN+EX_LR(r13) + std r11,PACA_EXGEN+EX_SRR0(r13) + bl .slb_allocate_user + + ld r10,PACA_EXGEN+EX_LR(r13) + ld r3,PACA_EXGEN+EX_R3(r13) + lwz r9,PACA_EXGEN+EX_CCR(r13) + ld r11,PACA_EXGEN+EX_SRR0(r13) + mtlr r10 + beq- slb_miss_fault + + andi. r10,r12,MSR_RI /* check for unrecoverable exception */ + beq- unrecov_user_slb + mfmsr r10 + +.machine push +.machine "power4" + mtcrf 0x80,r9 +.machine pop + + clrrdi r10,r10,2 /* clear RI before setting SRR0/1 */ + mtmsrd r10,1 + + mtspr SRR0,r11 + mtspr SRR1,r12 + + ld r9,PACA_EXGEN+EX_R9(r13) + ld r10,PACA_EXGEN+EX_R10(r13) + ld r11,PACA_EXGEN+EX_R11(r13) + ld r12,PACA_EXGEN+EX_R12(r13) + ld r13,PACA_EXGEN+EX_R13(r13) + rfid + b . + +slb_miss_fault: + EXCEPTION_PROLOG_COMMON(0x380, PACA_EXGEN) + ld r4,PACA_EXGEN+EX_DAR(r13) + li r5,0 + std r4,_DAR(r1) + std r5,_DSISR(r1) + b .handle_page_fault + +unrecov_user_slb: + EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN) + DISABLE_INTS + bl .save_nvgprs +1: addi r3,r1,STACK_FRAME_OVERHEAD + bl .unrecoverable_exception + b 1b + +#endif /* __DISABLED__ */ + + +/* + * r13 points to the PACA, r9 contains the saved CR, + * r12 contain the saved SRR1, SRR0 is still ready for return + * r3 has the faulting address + * r9 - r13 are saved in paca->exslb. + * r3 is saved in paca->slb_r3 + * We assume we aren't going to take any exceptions during this procedure. + */ +_GLOBAL(slb_miss_realmode) + mflr r10 + + stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ + std r10,PACA_EXSLB+EX_LR(r13) /* save LR */ + + bl .slb_allocate_realmode + + /* All done -- return from exception. */ + + ld r10,PACA_EXSLB+EX_LR(r13) + ld r3,PACA_EXSLB+EX_R3(r13) + lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */ +#ifdef CONFIG_PPC_ISERIES + ld r11,PACALPPACA+LPPACASRR0(r13) /* get SRR0 value */ +#endif /* CONFIG_PPC_ISERIES */ + + mtlr r10 + + andi. r10,r12,MSR_RI /* check for unrecoverable exception */ + beq- unrecov_slb + +.machine push +.machine "power4" + mtcrf 0x80,r9 + mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */ +.machine pop + +#ifdef CONFIG_PPC_ISERIES + mtspr SPRN_SRR0,r11 + mtspr SPRN_SRR1,r12 +#endif /* CONFIG_PPC_ISERIES */ + ld r9,PACA_EXSLB+EX_R9(r13) + ld r10,PACA_EXSLB+EX_R10(r13) + ld r11,PACA_EXSLB+EX_R11(r13) + ld r12,PACA_EXSLB+EX_R12(r13) + ld r13,PACA_EXSLB+EX_R13(r13) + rfid + b . /* prevent speculative execution */ + +unrecov_slb: + EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB) + DISABLE_INTS + bl .save_nvgprs +1: addi r3,r1,STACK_FRAME_OVERHEAD + bl .unrecoverable_exception + b 1b + .align 7 .globl hardware_interrupt_common .globl hardware_interrupt_entry @@ -1139,62 +1337,6 @@ _GLOBAL(do_stab_bolted) b . /* prevent speculative execution */ /* - * r13 points to the PACA, r9 contains the saved CR, - * r11 and r12 contain the saved SRR0 and SRR1. - * r3 has the faulting address - * r9 - r13 are saved in paca->exslb. - * r3 is saved in paca->slb_r3 - * We assume we aren't going to take any exceptions during this procedure. - */ -_GLOBAL(do_slb_miss) - mflr r10 - - stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ - std r10,PACA_EXSLB+EX_LR(r13) /* save LR */ - - bl .slb_allocate /* handle it */ - - /* All done -- return from exception. */ - - ld r10,PACA_EXSLB+EX_LR(r13) - ld r3,PACA_EXSLB+EX_R3(r13) - lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */ -#ifdef CONFIG_PPC_ISERIES - ld r11,PACALPPACA+LPPACASRR0(r13) /* get SRR0 value */ -#endif /* CONFIG_PPC_ISERIES */ - - mtlr r10 - - andi. r10,r12,MSR_RI /* check for unrecoverable exception */ - beq- unrecov_slb - -.machine push -.machine "power4" - mtcrf 0x80,r9 - mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */ -.machine pop - -#ifdef CONFIG_PPC_ISERIES - mtspr SPRN_SRR0,r11 - mtspr SPRN_SRR1,r12 -#endif /* CONFIG_PPC_ISERIES */ - ld r9,PACA_EXSLB+EX_R9(r13) - ld r10,PACA_EXSLB+EX_R10(r13) - ld r11,PACA_EXSLB+EX_R11(r13) - ld r12,PACA_EXSLB+EX_R12(r13) - ld r13,PACA_EXSLB+EX_R13(r13) - rfid - b . /* prevent speculative execution */ - -unrecov_slb: - EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB) - DISABLE_INTS - bl .save_nvgprs -1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .unrecoverable_exception - b 1b - -/* * Space for CPU0's segment table. * * On iSeries, the hypervisor must fill in at least one entry before @@ -1558,18 +1700,9 @@ _GLOBAL(__secondary_start) HMT_MEDIUM /* Set thread priority to MEDIUM */ ld r2,PACATOC(r13) - li r6,0 - stb r6,PACAPROCENABLED(r13) - -#ifndef CONFIG_PPC_ISERIES - /* Initialize the page table pointer register. */ - LOADADDR(r6,_SDR1) - ld r6,0(r6) /* get the value of _SDR1 */ - mtspr SPRN_SDR1,r6 /* set the htab location */ -#endif - /* Initialize the first segment table (or SLB) entry */ - ld r3,PACASTABVIRT(r13) /* get addr of segment table */ - bl .stab_initialize + + /* Do early setup for that CPU */ + bl .early_setup_secondary /* Initialize the kernel stack. Just a repeat for iSeries. */ LOADADDR(r3,current_set) @@ -1578,37 +1711,6 @@ _GLOBAL(__secondary_start) addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD std r1,PACAKSAVE(r13) - ld r3,PACASTABREAL(r13) /* get raddr of segment table */ - ori r4,r3,1 /* turn on valid bit */ - -#ifdef CONFIG_PPC_ISERIES - li r0,-1 /* hypervisor call */ - li r3,1 - sldi r3,r3,63 /* 0x8000000000000000 */ - ori r3,r3,4 /* 0x8000000000000004 */ - sc /* HvCall_setASR */ -#else - /* set the ASR */ - ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ - ld r3,0(r3) - lwz r3,PLATFORM(r3) /* r3 = platform flags */ - andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */ - beq 98f /* branch if result is 0 */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmpwi r3,0x37 /* SStar */ - beq 97f - cmpwi r3,0x36 /* IStar */ - beq 97f - cmpwi r3,0x34 /* Pulsar */ - bne 98f -97: li r3,H_SET_ASR /* hcall = H_SET_ASR */ - HVSC /* Invoking hcall */ - b 99f -98: /* !(rpa hypervisor) || !(star) */ - mtasr r4 /* set the stab location */ -99: -#endif li r7,0 mtlr r7 @@ -1750,40 +1852,6 @@ _STATIC(start_here_multiplatform) mr r3,r31 bl .early_setup - /* set the ASR */ - ld r3,PACASTABREAL(r13) - ori r4,r3,1 /* turn on valid bit */ - ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ - ld r3,0(r3) - lwz r3,PLATFORM(r3) /* r3 = platform flags */ - andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */ - beq 98f /* branch if result is 0 */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmpwi r3,0x37 /* SStar */ - beq 97f - cmpwi r3,0x36 /* IStar */ - beq 97f - cmpwi r3,0x34 /* Pulsar */ - bne 98f -97: li r3,H_SET_ASR /* hcall = H_SET_ASR */ - HVSC /* Invoking hcall */ - b 99f -98: /* !(rpa hypervisor) || !(star) */ - mtasr r4 /* set the stab location */ -99: - /* Set SDR1 (hash table pointer) */ - ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ - ld r3,0(r3) - lwz r3,PLATFORM(r3) /* r3 = platform flags */ - /* Test if bit 0 is set (LPAR bit) */ - andi. r3,r3,PLATFORM_LPAR - bne 98f /* branch if result is !0 */ - LOADADDR(r6,_SDR1) /* Only if NOT LPAR */ - sub r6,r6,r26 - ld r6,0(r6) /* get the value of _SDR1 */ - mtspr SPRN_SDR1,r6 /* set the htab location */ -98: LOADADDR(r3,.start_here_common) SET_REG_TO_CONST(r4, MSR_KERNEL) mtspr SPRN_SRR0,r3 @@ -1914,24 +1982,6 @@ _GLOBAL(hmt_start_secondary) blr #endif -#if defined(CONFIG_KEXEC) || defined(CONFIG_SMP) -_GLOBAL(smp_release_cpus) - /* All secondary cpus are spinning on a common - * spinloop, release them all now so they can start - * to spin on their individual paca spinloops. - * For non SMP kernels, the secondary cpus never - * get out of the common spinloop. - * XXX This does nothing useful on iSeries, secondaries are - * already waiting on their paca. - */ - li r3,1 - LOADADDR(r5,__secondary_hold_spinloop) - std r3,0(r5) - sync - blr -#endif /* CONFIG_SMP */ - - /* * We put a few things here that have to be page-aligned. * This stuff goes at the beginning of the bss, which is page-aligned. diff --git a/arch/ppc64/kernel/idle.c b/arch/ppc64/kernel/idle.c index 8abd2ad..b879d30 100644 --- a/arch/ppc64/kernel/idle.c +++ b/arch/ppc64/kernel/idle.c @@ -26,22 +26,18 @@ #include <asm/processor.h> #include <asm/cputable.h> #include <asm/time.h> -#include <asm/systemcfg.h> #include <asm/machdep.h> +#include <asm/smp.h> extern void power4_idle(void); void default_idle(void) { - long oldval; unsigned int cpu = smp_processor_id(); + set_thread_flag(TIF_POLLING_NRFLAG); while (1) { - oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); - - if (!oldval) { - set_thread_flag(TIF_POLLING_NRFLAG); - + if (!need_resched()) { while (!need_resched() && !cpu_is_offline(cpu)) { ppc64_runlatch_off(); @@ -54,13 +50,12 @@ void default_idle(void) } HMT_medium(); - clear_thread_flag(TIF_POLLING_NRFLAG); - } else { - set_need_resched(); } ppc64_runlatch_on(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) cpu_die(); } @@ -76,7 +71,9 @@ void native_idle(void) if (need_resched()) { ppc64_runlatch_on(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); } if (cpu_is_offline(smp_processor_id()) && diff --git a/arch/ppc64/kernel/kprobes.c b/arch/ppc64/kernel/kprobes.c index ed876a5..511af54 100644 --- a/arch/ppc64/kernel/kprobes.c +++ b/arch/ppc64/kernel/kprobes.c @@ -30,19 +30,14 @@ #include <linux/config.h> #include <linux/kprobes.h> #include <linux/ptrace.h> -#include <linux/spinlock.h> #include <linux/preempt.h> #include <asm/cacheflush.h> #include <asm/kdebug.h> #include <asm/sstep.h> static DECLARE_MUTEX(kprobe_mutex); - -static struct kprobe *current_kprobe; -static unsigned long kprobe_status, kprobe_saved_msr; -static struct kprobe *kprobe_prev; -static unsigned long kprobe_status_prev, kprobe_saved_msr_prev; -static struct pt_regs jprobe_saved_regs; +DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); int __kprobes arch_prepare_kprobe(struct kprobe *p) { @@ -108,20 +103,28 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) regs->nip = (unsigned long)p->ainsn.insn; } -static inline void save_previous_kprobe(void) +static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) +{ + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; + kcb->prev_kprobe.saved_msr = kcb->kprobe_saved_msr; +} + +static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) { - kprobe_prev = current_kprobe; - kprobe_status_prev = kprobe_status; - kprobe_saved_msr_prev = kprobe_saved_msr; + __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + kcb->kprobe_status = kcb->prev_kprobe.status; + kcb->kprobe_saved_msr = kcb->prev_kprobe.saved_msr; } -static inline void restore_previous_kprobe(void) +static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) { - current_kprobe = kprobe_prev; - kprobe_status = kprobe_status_prev; - kprobe_saved_msr = kprobe_saved_msr_prev; + __get_cpu_var(current_kprobe) = p; + kcb->kprobe_saved_msr = regs->msr; } +/* Called with kretprobe_lock held */ void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) { @@ -145,19 +148,24 @@ static inline int kprobe_handler(struct pt_regs *regs) struct kprobe *p; int ret = 0; unsigned int *addr = (unsigned int *)regs->nip; + struct kprobe_ctlblk *kcb; + + /* + * We don't want to be preempted for the entire + * duration of kprobe processing + */ + preempt_disable(); + kcb = get_kprobe_ctlblk(); /* Check we're not actually recursing */ if (kprobe_running()) { - /* We *are* holding lock here, so this is safe. - Disarm the probe we just hit, and ignore it. */ p = get_kprobe(addr); if (p) { kprobe_opcode_t insn = *p->ainsn.insn; - if (kprobe_status == KPROBE_HIT_SS && + if (kcb->kprobe_status == KPROBE_HIT_SS && is_trap(insn)) { regs->msr &= ~MSR_SE; - regs->msr |= kprobe_saved_msr; - unlock_kprobes(); + regs->msr |= kcb->kprobe_saved_msr; goto no_kprobe; } /* We have reentered the kprobe_handler(), since @@ -166,27 +174,24 @@ static inline int kprobe_handler(struct pt_regs *regs) * just single step on the instruction of the new probe * without calling any user handlers. */ - save_previous_kprobe(); - current_kprobe = p; - kprobe_saved_msr = regs->msr; + save_previous_kprobe(kcb); + set_current_kprobe(p, regs, kcb); + kcb->kprobe_saved_msr = regs->msr; p->nmissed++; prepare_singlestep(p, regs); - kprobe_status = KPROBE_REENTER; + kcb->kprobe_status = KPROBE_REENTER; return 1; } else { - p = current_kprobe; + p = __get_cpu_var(current_kprobe); if (p->break_handler && p->break_handler(p, regs)) { goto ss_probe; } } - /* If it's not ours, can't be delete race, (we hold lock). */ goto no_kprobe; } - lock_kprobes(); p = get_kprobe(addr); if (!p) { - unlock_kprobes(); if (*addr != BREAKPOINT_INSTRUCTION) { /* * PowerPC has multiple variants of the "trap" @@ -209,24 +214,19 @@ static inline int kprobe_handler(struct pt_regs *regs) goto no_kprobe; } - kprobe_status = KPROBE_HIT_ACTIVE; - current_kprobe = p; - kprobe_saved_msr = regs->msr; + kcb->kprobe_status = KPROBE_HIT_ACTIVE; + set_current_kprobe(p, regs, kcb); if (p->pre_handler && p->pre_handler(p, regs)) /* handler has already set things up, so skip ss setup */ return 1; ss_probe: prepare_singlestep(p, regs); - kprobe_status = KPROBE_HIT_SS; - /* - * This preempt_disable() matches the preempt_enable_no_resched() - * in post_kprobe_handler(). - */ - preempt_disable(); + kcb->kprobe_status = KPROBE_HIT_SS; return 1; no_kprobe: + preempt_enable_no_resched(); return ret; } @@ -251,9 +251,10 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) struct kretprobe_instance *ri = NULL; struct hlist_head *head; struct hlist_node *node, *tmp; - unsigned long orig_ret_address = 0; + unsigned long flags, orig_ret_address = 0; unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline; + spin_lock_irqsave(&kretprobe_lock, flags); head = kretprobe_inst_table_head(current); /* @@ -292,12 +293,14 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address)); regs->nip = orig_ret_address; - unlock_kprobes(); + reset_current_kprobe(); + spin_unlock_irqrestore(&kretprobe_lock, flags); + preempt_enable_no_resched(); /* * By returning a non-zero value, we are telling - * kprobe_handler() that we have handled unlocking - * and re-enabling preemption. + * kprobe_handler() that we don't want the post_handler + * to run (and have re-enabled preemption) */ return 1; } @@ -323,23 +326,26 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) static inline int post_kprobe_handler(struct pt_regs *regs) { - if (!kprobe_running()) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) return 0; - if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) { - kprobe_status = KPROBE_HIT_SSDONE; - current_kprobe->post_handler(current_kprobe, regs, 0); + if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); } - resume_execution(current_kprobe, regs); - regs->msr |= kprobe_saved_msr; + resume_execution(cur, regs); + regs->msr |= kcb->kprobe_saved_msr; /*Restore back the original saved kprobes variables and continue. */ - if (kprobe_status == KPROBE_REENTER) { - restore_previous_kprobe(); + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); goto out; } - unlock_kprobes(); + reset_current_kprobe(); out: preempt_enable_no_resched(); @@ -354,19 +360,20 @@ out: return 1; } -/* Interrupts disabled, kprobe_lock held. */ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) { - if (current_kprobe->fault_handler - && current_kprobe->fault_handler(current_kprobe, regs, trapnr)) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) return 1; - if (kprobe_status & KPROBE_HIT_SS) { - resume_execution(current_kprobe, regs); + if (kcb->kprobe_status & KPROBE_HIT_SS) { + resume_execution(cur, regs); regs->msr &= ~MSR_SE; - regs->msr |= kprobe_saved_msr; + regs->msr |= kcb->kprobe_saved_msr; - unlock_kprobes(); + reset_current_kprobe(); preempt_enable_no_resched(); } return 0; @@ -381,11 +388,6 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; - /* - * Interrupts are not disabled here. We need to disable - * preemption, because kprobe_running() uses smp_processor_id(). - */ - preempt_disable(); switch (val) { case DIE_BPT: if (kprobe_handler(args->regs)) @@ -396,22 +398,25 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, ret = NOTIFY_STOP; break; case DIE_PAGE_FAULT: + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); if (kprobe_running() && kprobe_fault_handler(args->regs, args->trapnr)) ret = NOTIFY_STOP; + preempt_enable(); break; default: break; } - preempt_enable_no_resched(); return ret; } int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - memcpy(&jprobe_saved_regs, regs, sizeof(struct pt_regs)); + memcpy(&kcb->jprobe_saved_regs, regs, sizeof(struct pt_regs)); /* setup return addr to the jprobe handler routine */ regs->nip = (unsigned long)(((func_descr_t *)jp->entry)->entry); @@ -431,12 +436,15 @@ void __kprobes jprobe_return_end(void) int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + /* * FIXME - we should ideally be validating that we got here 'cos * of the "trap" in jprobe_return() above, before restoring the * saved regs... */ - memcpy(regs, &jprobe_saved_regs, sizeof(struct pt_regs)); + memcpy(regs, &kcb->jprobe_saved_regs, sizeof(struct pt_regs)); + preempt_enable_no_resched(); return 1; } diff --git a/arch/ppc64/kernel/machine_kexec.c b/arch/ppc64/kernel/machine_kexec.c index bf7cc4f..07ea035 100644 --- a/arch/ppc64/kernel/machine_kexec.c +++ b/arch/ppc64/kernel/machine_kexec.c @@ -24,6 +24,7 @@ #include <asm/mmu.h> #include <asm/sections.h> /* _end */ #include <asm/prom.h> +#include <asm/smp.h> #define HASH_GROUP_SIZE 0x80 /* size of each hash group, asm/mmu.h */ @@ -244,7 +245,6 @@ static void kexec_prepare_cpus(void) static void kexec_prepare_cpus(void) { - extern void smp_release_cpus(void); /* * move the secondarys to us so that we can copy * the new kernel 0-0x100 safely diff --git a/arch/ppc64/kernel/misc.S b/arch/ppc64/kernel/misc.S index 077507f..492bca6 100644 --- a/arch/ppc64/kernel/misc.S +++ b/arch/ppc64/kernel/misc.S @@ -78,12 +78,12 @@ _GLOBAL(call_do_softirq) mtlr r0 blr -_GLOBAL(call_handle_IRQ_event) +_GLOBAL(call___do_IRQ) mflr r0 std r0,16(r1) - stdu r1,THREAD_SIZE-112(r6) - mr r1,r6 - bl .handle_IRQ_event + stdu r1,THREAD_SIZE-112(r5) + mr r1,r5 + bl .__do_IRQ ld r1,0(r1) ld r0,16(r1) mtlr r0 @@ -560,7 +560,7 @@ _GLOBAL(real_readb) isync blr - /* +/* * Do an IO access in real mode */ _GLOBAL(real_writeb) @@ -593,6 +593,76 @@ _GLOBAL(real_writeb) #endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */ /* + * SCOM access functions for 970 (FX only for now) + * + * unsigned long scom970_read(unsigned int address); + * void scom970_write(unsigned int address, unsigned long value); + * + * The address passed in is the 24 bits register address. This code + * is 970 specific and will not check the status bits, so you should + * know what you are doing. + */ +_GLOBAL(scom970_read) + /* interrupts off */ + mfmsr r4 + ori r0,r4,MSR_EE + xori r0,r0,MSR_EE + mtmsrd r0,1 + + /* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits + * (including parity). On current CPUs they must be 0'd, + * and finally or in RW bit + */ + rlwinm r3,r3,8,0,15 + ori r3,r3,0x8000 + + /* do the actual scom read */ + sync + mtspr SPRN_SCOMC,r3 + isync + mfspr r3,SPRN_SCOMD + isync + mfspr r0,SPRN_SCOMC + isync + + /* XXX: fixup result on some buggy 970's (ouch ! we lost a bit, bah + * that's the best we can do). Not implemented yet as we don't use + * the scom on any of the bogus CPUs yet, but may have to be done + * ultimately + */ + + /* restore interrupts */ + mtmsrd r4,1 + blr + + +_GLOBAL(scom970_write) + /* interrupts off */ + mfmsr r5 + ori r0,r5,MSR_EE + xori r0,r0,MSR_EE + mtmsrd r0,1 + + /* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits + * (including parity). On current CPUs they must be 0'd. + */ + + rlwinm r3,r3,8,0,15 + + sync + mtspr SPRN_SCOMD,r4 /* write data */ + isync + mtspr SPRN_SCOMC,r3 /* write command */ + isync + mfspr 3,SPRN_SCOMC + isync + + /* restore interrupts */ + mtmsrd r5,1 + blr + + +/* * Create a kernel thread * kernel_thread(fn, arg, flags) */ diff --git a/arch/ppc64/kernel/nvram.c b/arch/ppc64/kernel/nvram.c index 4fb1a9f..c0fcd29 100644 --- a/arch/ppc64/kernel/nvram.c +++ b/arch/ppc64/kernel/nvram.c @@ -31,7 +31,6 @@ #include <asm/rtas.h> #include <asm/prom.h> #include <asm/machdep.h> -#include <asm/systemcfg.h> #undef DEBUG_NVRAM @@ -167,7 +166,7 @@ static int dev_nvram_ioctl(struct inode *inode, struct file *file, case IOC_NVRAM_GET_OFFSET: { int part, offset; - if (systemcfg->platform != PLATFORM_POWERMAC) + if (_machine != PLATFORM_POWERMAC) return -EINVAL; if (copy_from_user(&part, (void __user*)arg, sizeof(part)) != 0) return -EFAULT; @@ -450,7 +449,7 @@ static int nvram_setup_partition(void) * in our nvram, as Apple defined partitions use pretty much * all of the space */ - if (systemcfg->platform == PLATFORM_POWERMAC) + if (_machine == PLATFORM_POWERMAC) return -ENOSPC; /* see if we have an OS partition that meets our needs. diff --git a/arch/ppc64/kernel/pci.c b/arch/ppc64/kernel/pci.c index 3d2106b..3cef1b8 100644 --- a/arch/ppc64/kernel/pci.c +++ b/arch/ppc64/kernel/pci.c @@ -295,8 +295,8 @@ static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev) } } -static struct pci_dev *of_create_pci_dev(struct device_node *node, - struct pci_bus *bus, int devfn) +struct pci_dev *of_create_pci_dev(struct device_node *node, + struct pci_bus *bus, int devfn) { struct pci_dev *dev; const char *type; @@ -354,10 +354,9 @@ static struct pci_dev *of_create_pci_dev(struct device_node *node, return dev; } +EXPORT_SYMBOL(of_create_pci_dev); -static void of_scan_pci_bridge(struct device_node *node, struct pci_dev *dev); - -static void __devinit of_scan_bus(struct device_node *node, +void __devinit of_scan_bus(struct device_node *node, struct pci_bus *bus) { struct device_node *child = NULL; @@ -381,9 +380,10 @@ static void __devinit of_scan_bus(struct device_node *node, do_bus_setup(bus); } +EXPORT_SYMBOL(of_scan_bus); -static void __devinit of_scan_pci_bridge(struct device_node *node, - struct pci_dev *dev) +void __devinit of_scan_pci_bridge(struct device_node *node, + struct pci_dev *dev) { struct pci_bus *bus; u32 *busrange, *ranges; @@ -464,9 +464,10 @@ static void __devinit of_scan_pci_bridge(struct device_node *node, else if (mode == PCI_PROBE_NORMAL) pci_scan_child_bus(bus); } +EXPORT_SYMBOL(of_scan_pci_bridge); #endif /* CONFIG_PPC_MULTIPLATFORM */ -static void __devinit scan_phb(struct pci_controller *hose) +void __devinit scan_phb(struct pci_controller *hose) { struct pci_bus *bus; struct device_node *node = hose->arch_data; @@ -547,6 +548,11 @@ static int __init pcibios_init(void) if (ppc64_isabridge_dev != NULL) printk("ISA bridge at %s\n", pci_name(ppc64_isabridge_dev)); +#ifdef CONFIG_PPC_MULTIPLATFORM + /* map in PCI I/O space */ + phbs_remap_io(); +#endif + printk("PCI: Probing PCI hardware done\n"); return 0; @@ -1276,12 +1282,9 @@ long sys_pciconfig_iobase(long which, unsigned long in_bus, * G5 machines... So when something asks for bus 0 io base * (bus 0 is HT root), we return the AGP one instead. */ -#ifdef CONFIG_PPC_PMAC - if (systemcfg->platform == PLATFORM_POWERMAC && - machine_is_compatible("MacRISC4")) + if (machine_is_compatible("MacRISC4")) if (in_bus == 0) in_bus = 0xf0; -#endif /* CONFIG_PPC_PMAC */ /* That syscall isn't quite compatible with PCI domains, but it's * used on pre-domains setup. We return the first match diff --git a/arch/ppc64/kernel/pci_dn.c b/arch/ppc64/kernel/pci_dn.c index 493bbe4..12c4c9e 100644 --- a/arch/ppc64/kernel/pci_dn.c +++ b/arch/ppc64/kernel/pci_dn.c @@ -43,7 +43,7 @@ static void * __devinit update_dn_pci_info(struct device_node *dn, void *data) u32 *regs; struct pci_dn *pdn; - if (phb->is_dynamic) + if (mem_init_done) pdn = kmalloc(sizeof(*pdn), GFP_KERNEL); else pdn = alloc_bootmem(sizeof(*pdn)); @@ -120,6 +120,14 @@ void *traverse_pci_devices(struct device_node *start, traverse_func pre, return NULL; } +/** + * pci_devs_phb_init_dynamic - setup pci devices under this PHB + * phb: pci-to-host bridge (top-level bridge connecting to cpu) + * + * This routine is called both during boot, (before the memory + * subsystem is set up, before kmalloc is valid) and during the + * dynamic lpar operation of adding a PHB to a running system. + */ void __devinit pci_devs_phb_init_dynamic(struct pci_controller *phb) { struct device_node * dn = (struct device_node *) phb->arch_data; @@ -181,13 +189,14 @@ EXPORT_SYMBOL(fetch_dev_dn); static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node) { struct device_node *np = node; - struct pci_dn *pci; + struct pci_dn *pci = NULL; int err = NOTIFY_OK; switch (action) { case PSERIES_RECONFIG_ADD: pci = np->parent->data; - update_dn_pci_info(np, pci->phb); + if (pci) + update_dn_pci_info(np, pci->phb); break; default: err = NOTIFY_DONE; @@ -200,9 +209,14 @@ static struct notifier_block pci_dn_reconfig_nb = { .notifier_call = pci_dn_reconfig_notifier, }; -/* - * Actually initialize the phbs. - * The buswalk on this phb has not happened yet. +/** + * pci_devs_phb_init - Initialize phbs and pci devs under them. + * + * This routine walks over all phb's (pci-host bridges) on the + * system, and sets up assorted pci-related structures + * (including pci info in the device node structs) for each + * pci device found underneath. This routine runs once, + * early in the boot sequence. */ void __init pci_devs_phb_init(void) { diff --git a/arch/ppc64/kernel/prom.c b/arch/ppc64/kernel/prom.c index 97bfceb..fbad2c3 100644 --- a/arch/ppc64/kernel/prom.c +++ b/arch/ppc64/kernel/prom.c @@ -31,6 +31,7 @@ #include <linux/initrd.h> #include <linux/bitops.h> #include <linux/module.h> +#include <linux/module.h> #include <asm/prom.h> #include <asm/rtas.h> @@ -46,7 +47,6 @@ #include <asm/pgtable.h> #include <asm/pci.h> #include <asm/iommu.h> -#include <asm/ppcdebug.h> #include <asm/btext.h> #include <asm/sections.h> #include <asm/machdep.h> @@ -318,7 +318,7 @@ static int __devinit finish_node_interrupts(struct device_node *np, } /* We offset irq numbers for the u3 MPIC by 128 in PowerMac */ - if (systemcfg->platform == PLATFORM_POWERMAC && ic && ic->parent) { + if (_machine == PLATFORM_POWERMAC && ic && ic->parent) { char *name = get_property(ic->parent, "name", NULL); if (name && !strcmp(name, "u3")) np->intrs[intrcount].line += 128; @@ -635,10 +635,10 @@ static inline char *find_flat_dt_string(u32 offset) * used to extract the memory informations at boot before we can * unflatten the tree */ -static int __init scan_flat_dt(int (*it)(unsigned long node, - const char *uname, int depth, - void *data), - void *data) +int __init of_scan_flat_dt(int (*it)(unsigned long node, + const char *uname, int depth, + void *data), + void *data) { unsigned long p = ((unsigned long)initial_boot_params) + initial_boot_params->off_dt_struct; @@ -695,8 +695,8 @@ static int __init scan_flat_dt(int (*it)(unsigned long node, * This function can be used within scan_flattened_dt callback to get * access to properties */ -static void* __init get_flat_dt_prop(unsigned long node, const char *name, - unsigned long *size) +void* __init of_get_flat_dt_prop(unsigned long node, const char *name, + unsigned long *size) { unsigned long p = node; @@ -996,7 +996,7 @@ void __init unflatten_device_tree(void) static int __init early_init_dt_scan_cpus(unsigned long node, const char *uname, int depth, void *data) { - char *type = get_flat_dt_prop(node, "device_type", NULL); + char *type = of_get_flat_dt_prop(node, "device_type", NULL); u32 *prop; unsigned long size; @@ -1004,17 +1004,6 @@ static int __init early_init_dt_scan_cpus(unsigned long node, if (type == NULL || strcmp(type, "cpu") != 0) return 0; - /* On LPAR, look for the first ibm,pft-size property for the hash table size - */ - if (systemcfg->platform == PLATFORM_PSERIES_LPAR && ppc64_pft_size == 0) { - u32 *pft_size; - pft_size = (u32 *)get_flat_dt_prop(node, "ibm,pft-size", NULL); - if (pft_size != NULL) { - /* pft_size[0] is the NUMA CEC cookie */ - ppc64_pft_size = pft_size[1]; - } - } - if (initial_boot_params && initial_boot_params->version >= 2) { /* version 2 of the kexec param format adds the phys cpuid * of booted proc. @@ -1023,8 +1012,9 @@ static int __init early_init_dt_scan_cpus(unsigned long node, boot_cpuid = 0; } else { /* Check if it's the boot-cpu, set it's hw index in paca now */ - if (get_flat_dt_prop(node, "linux,boot-cpu", NULL) != NULL) { - u32 *prop = get_flat_dt_prop(node, "reg", NULL); + if (of_get_flat_dt_prop(node, "linux,boot-cpu", NULL) + != NULL) { + u32 *prop = of_get_flat_dt_prop(node, "reg", NULL); set_hard_smp_processor_id(0, prop == NULL ? 0 : *prop); boot_cpuid_phys = get_hard_smp_processor_id(0); } @@ -1032,14 +1022,14 @@ static int __init early_init_dt_scan_cpus(unsigned long node, #ifdef CONFIG_ALTIVEC /* Check if we have a VMX and eventually update CPU features */ - prop = (u32 *)get_flat_dt_prop(node, "ibm,vmx", NULL); + prop = (u32 *)of_get_flat_dt_prop(node, "ibm,vmx", NULL); if (prop && (*prop) > 0) { cur_cpu_spec->cpu_features |= CPU_FTR_ALTIVEC; cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC; } /* Same goes for Apple's "altivec" property */ - prop = (u32 *)get_flat_dt_prop(node, "altivec", NULL); + prop = (u32 *)of_get_flat_dt_prop(node, "altivec", NULL); if (prop) { cur_cpu_spec->cpu_features |= CPU_FTR_ALTIVEC; cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC; @@ -1051,7 +1041,7 @@ static int __init early_init_dt_scan_cpus(unsigned long node, * this by looking at the size of the ibm,ppc-interrupt-server#s * property */ - prop = (u32 *)get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", + prop = (u32 *)of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", &size); cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT; if (prop && ((size / sizeof(u32)) > 1)) @@ -1072,26 +1062,26 @@ static int __init early_init_dt_scan_chosen(unsigned long node, return 0; /* get platform type */ - prop = (u32 *)get_flat_dt_prop(node, "linux,platform", NULL); + prop = (u32 *)of_get_flat_dt_prop(node, "linux,platform", NULL); if (prop == NULL) return 0; - systemcfg->platform = *prop; + _machine = *prop; /* check if iommu is forced on or off */ - if (get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL) + if (of_get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL) iommu_is_off = 1; - if (get_flat_dt_prop(node, "linux,iommu-force-on", NULL) != NULL) + if (of_get_flat_dt_prop(node, "linux,iommu-force-on", NULL) != NULL) iommu_force_on = 1; - prop64 = (u64*)get_flat_dt_prop(node, "linux,memory-limit", NULL); + prop64 = (u64*)of_get_flat_dt_prop(node, "linux,memory-limit", NULL); if (prop64) memory_limit = *prop64; - prop64 = (u64*)get_flat_dt_prop(node, "linux,tce-alloc-start", NULL); + prop64 = (u64*)of_get_flat_dt_prop(node, "linux,tce-alloc-start",NULL); if (prop64) tce_alloc_start = *prop64; - prop64 = (u64*)get_flat_dt_prop(node, "linux,tce-alloc-end", NULL); + prop64 = (u64*)of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL); if (prop64) tce_alloc_end = *prop64; @@ -1102,9 +1092,12 @@ static int __init early_init_dt_scan_chosen(unsigned long node, { u64 *basep, *entryp; - basep = (u64*)get_flat_dt_prop(node, "linux,rtas-base", NULL); - entryp = (u64*)get_flat_dt_prop(node, "linux,rtas-entry", NULL); - prop = (u32*)get_flat_dt_prop(node, "linux,rtas-size", NULL); + basep = (u64*)of_get_flat_dt_prop(node, + "linux,rtas-base", NULL); + entryp = (u64*)of_get_flat_dt_prop(node, + "linux,rtas-entry", NULL); + prop = (u32*)of_get_flat_dt_prop(node, + "linux,rtas-size", NULL); if (basep && entryp && prop) { rtas.base = *basep; rtas.entry = *entryp; @@ -1125,11 +1118,11 @@ static int __init early_init_dt_scan_root(unsigned long node, if (depth != 0) return 0; - prop = (u32 *)get_flat_dt_prop(node, "#size-cells", NULL); + prop = (u32 *)of_get_flat_dt_prop(node, "#size-cells", NULL); dt_root_size_cells = (prop == NULL) ? 1 : *prop; DBG("dt_root_size_cells = %x\n", dt_root_size_cells); - prop = (u32 *)get_flat_dt_prop(node, "#address-cells", NULL); + prop = (u32 *)of_get_flat_dt_prop(node, "#address-cells", NULL); dt_root_addr_cells = (prop == NULL) ? 2 : *prop; DBG("dt_root_addr_cells = %x\n", dt_root_addr_cells); @@ -1161,7 +1154,7 @@ static unsigned long __init dt_mem_next_cell(int s, cell_t **cellp) static int __init early_init_dt_scan_memory(unsigned long node, const char *uname, int depth, void *data) { - char *type = get_flat_dt_prop(node, "device_type", NULL); + char *type = of_get_flat_dt_prop(node, "device_type", NULL); cell_t *reg, *endp; unsigned long l; @@ -1169,7 +1162,7 @@ static int __init early_init_dt_scan_memory(unsigned long node, if (type == NULL || strcmp(type, "memory") != 0) return 0; - reg = (cell_t *)get_flat_dt_prop(node, "reg", &l); + reg = (cell_t *)of_get_flat_dt_prop(node, "reg", &l); if (reg == NULL) return 0; @@ -1225,26 +1218,20 @@ void __init early_init_devtree(void *params) /* Setup flat device-tree pointer */ initial_boot_params = params; - /* By default, hash size is not set */ - ppc64_pft_size = 0; - /* Retreive various informations from the /chosen node of the * device-tree, including the platform type, initrd location and * size, TCE reserve, and more ... */ - scan_flat_dt(early_init_dt_scan_chosen, NULL); + of_scan_flat_dt(early_init_dt_scan_chosen, NULL); /* Scan memory nodes and rebuild LMBs */ lmb_init(); - scan_flat_dt(early_init_dt_scan_root, NULL); - scan_flat_dt(early_init_dt_scan_memory, NULL); + of_scan_flat_dt(early_init_dt_scan_root, NULL); + of_scan_flat_dt(early_init_dt_scan_memory, NULL); lmb_enforce_memory_limit(memory_limit); lmb_analyze(); - systemcfg->physicalMemorySize = lmb_phys_mem_size(); lmb_reserve(0, __pa(klimit)); - DBG("Phys. mem: %lx\n", systemcfg->physicalMemorySize); - /* Reserve LMB regions used by kernel, initrd, dt, etc... */ early_reserve_mem(); @@ -1253,26 +1240,8 @@ void __init early_init_devtree(void *params) /* Retreive hash table size from flattened tree plus other * CPU related informations (altivec support, boot CPU ID, ...) */ - scan_flat_dt(early_init_dt_scan_cpus, NULL); - - /* If hash size wasn't obtained above, we calculate it now based on - * the total RAM size - */ - if (ppc64_pft_size == 0) { - unsigned long rnd_mem_size, pteg_count; - - /* round mem_size up to next power of 2 */ - rnd_mem_size = 1UL << __ilog2(systemcfg->physicalMemorySize); - if (rnd_mem_size < systemcfg->physicalMemorySize) - rnd_mem_size <<= 1; - - /* # pages / 2 */ - pteg_count = max(rnd_mem_size >> (12 + 1), 1UL << 11); + of_scan_flat_dt(early_init_dt_scan_cpus, NULL); - ppc64_pft_size = __ilog2(pteg_count << 7); - } - - DBG("Hash pftSize: %x\n", (int)ppc64_pft_size); DBG(" <- early_init_devtree()\n"); } @@ -1781,7 +1750,7 @@ static int of_finish_dynamic_node(struct device_node *node, /* We don't support that function on PowerMac, at least * not yet */ - if (systemcfg->platform == PLATFORM_POWERMAC) + if (_machine == PLATFORM_POWERMAC) return -ENODEV; /* fix up new node's linux_phandle field */ @@ -1894,17 +1863,32 @@ get_property(struct device_node *np, const char *name, int *lenp) EXPORT_SYMBOL(get_property); /* - * Add a property to a node + * Add a property to a node. */ -void +int prom_add_property(struct device_node* np, struct property* prop) { - struct property **next = &np->properties; + struct property **next; prop->next = NULL; - while (*next) + write_lock(&devtree_lock); + next = &np->properties; + while (*next) { + if (strcmp(prop->name, (*next)->name) == 0) { + /* duplicate ! don't insert it */ + write_unlock(&devtree_lock); + return -1; + } next = &(*next)->next; + } *next = prop; + write_unlock(&devtree_lock); + + /* try to add to proc as well if it was initialized */ + if (np->pde) + proc_device_tree_add_prop(np->pde, prop); + + return 0; } #if 0 diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c index 69924ba..6375f40 100644 --- a/arch/ppc64/kernel/prom_init.c +++ b/arch/ppc64/kernel/prom_init.c @@ -44,7 +44,6 @@ #include <asm/pgtable.h> #include <asm/pci.h> #include <asm/iommu.h> -#include <asm/ppcdebug.h> #include <asm/btext.h> #include <asm/sections.h> #include <asm/machdep.h> @@ -1825,7 +1824,7 @@ static void __init fixup_device_tree(void) if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev)) == PROM_ERROR) return; - if (u3_rev != 0x35 && u3_rev != 0x37) + if (u3_rev < 0x35 || u3_rev > 0x39) return; /* does it need fixup ? */ if (prom_getproplen(i2c, "interrupts") > 0) @@ -1935,13 +1934,14 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long /* * On pSeries, inform the firmware about our capabilities */ - if (RELOC(of_platform) & PLATFORM_PSERIES) + if (RELOC(of_platform) == PLATFORM_PSERIES || + RELOC(of_platform) == PLATFORM_PSERIES_LPAR) prom_send_capabilities(); /* - * On pSeries and BPA, copy the CPU hold code + * On pSeries and Cell, copy the CPU hold code */ - if (RELOC(of_platform) & (PLATFORM_PSERIES | PLATFORM_BPA)) + if (RELOC(of_platform) & (PLATFORM_PSERIES | PLATFORM_CELL)) copy_and_flush(0, KERNELBASE - offset, 0x100, 0); /* diff --git a/arch/ppc64/kernel/udbg.c b/arch/ppc64/kernel/udbg.c index d49c361..0d878e7 100644 --- a/arch/ppc64/kernel/udbg.c +++ b/arch/ppc64/kernel/udbg.c @@ -10,12 +10,10 @@ */ #include <stdarg.h> -#define WANT_PPCDBG_TAB /* Only defined here */ #include <linux/config.h> #include <linux/types.h> #include <linux/sched.h> #include <linux/console.h> -#include <asm/ppcdebug.h> #include <asm/processor.h> void (*udbg_putc)(unsigned char c); @@ -89,59 +87,6 @@ void udbg_printf(const char *fmt, ...) va_end(args); } -/* PPCDBG stuff */ - -u64 ppc64_debug_switch; - -/* Special print used by PPCDBG() macro */ -void udbg_ppcdbg(unsigned long debug_flags, const char *fmt, ...) -{ - unsigned long active_debugs = debug_flags & ppc64_debug_switch; - - if (active_debugs) { - va_list ap; - unsigned char buf[UDBG_BUFSIZE]; - unsigned long i, len = 0; - - for (i=0; i < PPCDBG_NUM_FLAGS; i++) { - if (((1U << i) & active_debugs) && - trace_names[i]) { - len += strlen(trace_names[i]); - udbg_puts(trace_names[i]); - break; - } - } - - snprintf(buf, UDBG_BUFSIZE, " [%s]: ", current->comm); - len += strlen(buf); - udbg_puts(buf); - - while (len < 18) { - udbg_puts(" "); - len++; - } - - va_start(ap, fmt); - vsnprintf(buf, UDBG_BUFSIZE, fmt, ap); - udbg_puts(buf); - va_end(ap); - } -} - -unsigned long udbg_ifdebug(unsigned long flags) -{ - return (flags & ppc64_debug_switch); -} - -/* - * Initialize the PPCDBG state. Called before relocation has been enabled. - */ -void __init ppcdbg_initialize(void) -{ - ppc64_debug_switch = PPC_DEBUG_DEFAULT; /* | PPCDBG_BUSWALK | */ - /* PPCDBG_PHBINIT | PPCDBG_MM | PPCDBG_MMINIT | PPCDBG_TCEINIT | PPCDBG_TCE */; -} - /* * Early boot console based on udbg */ diff --git a/arch/ppc64/kernel/udbg_scc.c b/arch/ppc64/kernel/udbg_scc.c index c47fd6c..820c535 100644 --- a/arch/ppc64/kernel/udbg_scc.c +++ b/arch/ppc64/kernel/udbg_scc.c @@ -12,7 +12,6 @@ #include <linux/types.h> #include <asm/udbg.h> #include <asm/processor.h> -#include <asm/naca.h> #include <asm/io.h> #include <asm/prom.h> #include <asm/pmac_feature.h> diff --git a/arch/ppc64/kernel/vdso.c b/arch/ppc64/kernel/vdso.c index 4aacf52..1bbacac 100644 --- a/arch/ppc64/kernel/vdso.c +++ b/arch/ppc64/kernel/vdso.c @@ -34,6 +34,7 @@ #include <asm/machdep.h> #include <asm/cputable.h> #include <asm/sections.h> +#include <asm/systemcfg.h> #include <asm/vdso.h> #undef DEBUG @@ -179,7 +180,7 @@ static struct page * vdso_vma_nopage(struct vm_area_struct * vma, * Last page is systemcfg. */ if ((vma->vm_end - address) <= PAGE_SIZE) - pg = virt_to_page(systemcfg); + pg = virt_to_page(_systemcfg); else pg = virt_to_page(vbase + offset); @@ -604,7 +605,7 @@ void __init vdso_init(void) get_page(pg); } - get_page(virt_to_page(systemcfg)); + get_page(virt_to_page(_systemcfg)); } int in_gate_area_no_task(unsigned long addr) diff --git a/arch/ppc64/lib/Makefile b/arch/ppc64/lib/Makefile deleted file mode 100644 index 42d5295..0000000 --- a/arch/ppc64/lib/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for ppc64-specific library files.. -# - -lib-y := string.o diff --git a/arch/ppc64/lib/string.S b/arch/ppc64/lib/string.S deleted file mode 100644 index e21a003..0000000 --- a/arch/ppc64/lib/string.S +++ /dev/null @@ -1,179 +0,0 @@ -/* - * String handling functions for PowerPC. - * - * Copyright (C) 1996 Paul Mackerras. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <asm/processor.h> -#include <asm/errno.h> -#include <asm/ppc_asm.h> - -_GLOBAL(strcpy) - addi r5,r3,-1 - addi r4,r4,-1 -1: lbzu r0,1(r4) - cmpwi 0,r0,0 - stbu r0,1(r5) - bne 1b - blr - -_GLOBAL(strncpy) - cmpwi 0,r5,0 - beqlr - mtctr r5 - addi r6,r3,-1 - addi r4,r4,-1 -1: lbzu r0,1(r4) - cmpwi 0,r0,0 - stbu r0,1(r6) - bdnzf 2,1b /* dec ctr, branch if ctr != 0 && !cr0.eq */ - blr - -_GLOBAL(strcat) - addi r5,r3,-1 - addi r4,r4,-1 -1: lbzu r0,1(r5) - cmpwi 0,r0,0 - bne 1b - addi r5,r5,-1 -1: lbzu r0,1(r4) - cmpwi 0,r0,0 - stbu r0,1(r5) - bne 1b - blr - -_GLOBAL(strcmp) - addi r5,r3,-1 - addi r4,r4,-1 -1: lbzu r3,1(r5) - cmpwi 1,r3,0 - lbzu r0,1(r4) - subf. r3,r0,r3 - beqlr 1 - beq 1b - blr - -_GLOBAL(strlen) - addi r4,r3,-1 -1: lbzu r0,1(r4) - cmpwi 0,r0,0 - bne 1b - subf r3,r3,r4 - blr - -_GLOBAL(memcmp) - cmpwi 0,r5,0 - ble- 2f - mtctr r5 - addi r6,r3,-1 - addi r4,r4,-1 -1: lbzu r3,1(r6) - lbzu r0,1(r4) - subf. r3,r0,r3 - bdnzt 2,1b - blr -2: li r3,0 - blr - -_GLOBAL(memchr) - cmpwi 0,r5,0 - ble- 2f - mtctr r5 - addi r3,r3,-1 -1: lbzu r0,1(r3) - cmpw 0,r0,r4 - bdnzf 2,1b - beqlr -2: li r3,0 - blr - -_GLOBAL(__clear_user) - addi r6,r3,-4 - li r3,0 - li r5,0 - cmplwi 0,r4,4 - blt 7f - /* clear a single word */ -11: stwu r5,4(r6) - beqlr - /* clear word sized chunks */ - andi. r0,r6,3 - add r4,r0,r4 - subf r6,r0,r6 - srwi r0,r4,2 - andi. r4,r4,3 - mtctr r0 - bdz 7f -1: stwu r5,4(r6) - bdnz 1b - /* clear byte sized chunks */ -7: cmpwi 0,r4,0 - beqlr - mtctr r4 - addi r6,r6,3 -8: stbu r5,1(r6) - bdnz 8b - blr -90: mr r3,r4 - blr -91: mfctr r3 - slwi r3,r3,2 - add r3,r3,r4 - blr -92: mfctr r3 - blr - - .section __ex_table,"a" - .align 3 - .llong 11b,90b - .llong 1b,91b - .llong 8b,92b - .text - -/* r3 = dst, r4 = src, r5 = count */ -_GLOBAL(__strncpy_from_user) - addi r6,r3,-1 - addi r4,r4,-1 - cmpwi 0,r5,0 - beq 2f - mtctr r5 -1: lbzu r0,1(r4) - cmpwi 0,r0,0 - stbu r0,1(r6) - bdnzf 2,1b /* dec ctr, branch if ctr != 0 && !cr0.eq */ - beq 3f -2: addi r6,r6,1 -3: subf r3,r3,r6 - blr -99: li r3,-EFAULT - blr - - .section __ex_table,"a" - .align 3 - .llong 1b,99b - .text - -/* r3 = str, r4 = len (> 0) */ -_GLOBAL(__strnlen_user) - addi r7,r3,-1 - mtctr r4 /* ctr = len */ -1: lbzu r0,1(r7) /* get next byte */ - cmpwi 0,r0,0 - bdnzf 2,1b /* loop if --ctr != 0 && byte != 0 */ - addi r7,r7,1 - subf r3,r3,r7 /* number of bytes we have looked at */ - beqlr /* return if we found a 0 byte */ - cmpw 0,r3,r4 /* did we look at all len bytes? */ - blt 99f /* if not, must have hit top */ - addi r3,r4,1 /* return len + 1 to indicate no null found */ - blr -99: li r3,0 /* bad address, return 0 */ - blr - - .section __ex_table,"a" - .align 3 - .llong 1b,99b diff --git a/arch/s390/Makefile b/arch/s390/Makefile index 98db304..73a09a6 100644 --- a/arch/s390/Makefile +++ b/arch/s390/Makefile @@ -76,9 +76,7 @@ AFLAGS += $(aflags-y) OBJCOPYFLAGS := -O binary LDFLAGS_vmlinux := -e start -head-$(CONFIG_ARCH_S390_31) += arch/$(ARCH)/kernel/head.o -head-$(CONFIG_ARCH_S390X) += arch/$(ARCH)/kernel/head64.o -head-y += arch/$(ARCH)/kernel/init_task.o +head-y := arch/$(ARCH)/kernel/head.o arch/$(ARCH)/kernel/init_task.o core-y += arch/$(ARCH)/mm/ arch/$(ARCH)/kernel/ arch/$(ARCH)/crypto/ \ arch/$(ARCH)/appldata/ diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index c9f2f60..dee6ab54 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -592,12 +592,15 @@ int appldata_register_ops(struct appldata_ops *ops) */ void appldata_unregister_ops(struct appldata_ops *ops) { + void *table; spin_lock(&appldata_ops_lock); - unregister_sysctl_table(ops->sysctl_header); list_del(&ops->list); - kfree(ops->ctl_table); + /* at that point any incoming access will fail */ + table = ops->ctl_table; ops->ctl_table = NULL; spin_unlock(&appldata_ops_lock); + unregister_sysctl_table(ops->sysctl_header); + kfree(table); P_INFO("%s-ops unregistered!\n", ops->name); } /********************** module-ops management <END> **************************/ diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile index 8584dd8..7434c32 100644 --- a/arch/s390/kernel/Makefile +++ b/arch/s390/kernel/Makefile @@ -8,9 +8,7 @@ obj-y := bitmap.o traps.o time.o process.o \ setup.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \ semaphore.o s390_ext.o debug.o profile.o irq.o reipl_diag.o -extra-$(CONFIG_ARCH_S390_31) += head.o -extra-$(CONFIG_ARCH_S390X) += head64.o -extra-y += init_task.o vmlinux.lds +extra-y += head.o init_task.o vmlinux.lds obj-$(CONFIG_MODULES) += s390_ksyms.o module.o obj-$(CONFIG_SMP) += smp.o diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c index bc59282..896d39d 100644 --- a/arch/s390/kernel/debug.c +++ b/arch/s390/kernel/debug.c @@ -486,7 +486,7 @@ out: * - goto next entry in p_info */ -extern inline int +static inline int debug_next_entry(file_private_info_t *p_info) { debug_info_t *id; @@ -800,7 +800,7 @@ debug_set_level(debug_info_t* id, int new_level) * - set active entry to next in the ring buffer */ -extern inline void +static inline void proceed_active_entry(debug_info_t * id) { if ((id->active_entries[id->active_area] += id->entry_size) @@ -817,7 +817,7 @@ proceed_active_entry(debug_info_t * id) * - set active area to next in the ring buffer */ -extern inline void +static inline void proceed_active_area(debug_info_t * id) { id->active_area++; @@ -828,7 +828,7 @@ proceed_active_area(debug_info_t * id) * get_active_entry: */ -extern inline debug_entry_t* +static inline debug_entry_t* get_active_entry(debug_info_t * id) { return (debug_entry_t *) (((char *) id->areas[id->active_area] @@ -841,7 +841,7 @@ get_active_entry(debug_info_t * id) * - set timestamp, caller address, cpu number etc. */ -extern inline void +static inline void debug_finish_entry(debug_info_t * id, debug_entry_t* active, int level, int exception) { @@ -971,7 +971,7 @@ debug_entry_t * counts arguments in format string for sprintf view */ -extern inline int +static inline int debug_count_numargs(char *string) { int numargs=0; diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 9b30f4c..27b0773 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -288,7 +288,7 @@ sysc_sigpending: bo BASED(sysc_restart) tm __TI_flags+3(%r9),_TIF_SINGLE_STEP bo BASED(sysc_singlestep) - b BASED(sysc_leave) # out of here, do NOT recheck + b BASED(sysc_work_loop) # # _TIF_RESTART_SVC is set, set up registers and restart svc @@ -645,7 +645,7 @@ io_sigpending: l %r1,BASED(.Ldo_signal) basr %r14,%r1 # call do_signal stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts - b BASED(io_leave) # out of here, do NOT recheck + b BASED(io_work_loop) /* * External interrupt handler routine diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index 7b9b4a2..4eb71ff 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -283,7 +283,7 @@ sysc_sigpending: jo sysc_restart tm __TI_flags+7(%r9),_TIF_SINGLE_STEP jo sysc_singlestep - j sysc_leave # out of here, do NOT recheck + j sysc_work_loop # # _TIF_RESTART_SVC is set, set up registers and restart svc @@ -684,7 +684,7 @@ io_sigpending: slgr %r3,%r3 # clear *oldset brasl %r14,do_signal # call do_signal stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts - j sysc_leave # out of here, do NOT recheck + j io_work_loop /* * External interrupt handler routine diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index 039354d..d31a97c 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -1,11 +1,12 @@ /* * arch/s390/kernel/head.S * - * S390 version - * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Hartmut Penner (hp@de.ibm.com), - * Martin Schwidefsky (schwidefsky@de.ibm.com), - * Rob van der Heij (rvdhei@iae.nl) + * (C) Copyright IBM Corp. 1999, 2005 + * + * Author(s): Hartmut Penner <hp@de.ibm.com> + * Martin Schwidefsky <schwidefsky@de.ibm.com> + * Rob van der Heij <rvdhei@iae.nl> + * Heiko Carstens <heiko.carstens@de.ibm.com> * * There are 5 different IPL methods * 1) load the image directly into ram at address 0 and do an PSW restart @@ -19,12 +20,7 @@ * 5) direct call of start by the SALIPL loader * We use the cpuid to distinguish between VM and native ipl * params for kernel are pushed to 0x10400 (see setup.h) - - Changes: - Okt 25 2000 <rvdheij@iae.nl> - added code to skip HDR and EOF to allow SL tape IPL (5 retries) - changed first CCW from rewind to backspace block - + * */ #include <linux/config.h> @@ -34,6 +30,12 @@ #include <asm/thread_info.h> #include <asm/page.h> +#ifdef CONFIG_ARCH_S390X +#define ARCH_OFFSET 4 +#else +#define ARCH_OFFSET 0 +#endif + #ifndef CONFIG_IPL .org 0 .long 0x00080000,0x80000000+startup # Just a restart PSW @@ -201,7 +203,7 @@ ssch 0(%r3) # load chunk of 1600 bytes bnz .Llderr .Lwait4irq: - mvc __LC_IO_NEW_PSW(8),.Lnewpsw # set up IO interrupt psw + mvc 0x78(8),.Lnewpsw # set up IO interrupt psw lpsw .Lwaitpsw .Lioint: c %r1,0xb8 # compare subchannel number @@ -265,13 +267,13 @@ iplstart: la %r2,IPL_BS # load start address bas %r14,.Lloader # load rest of ipl image l %r12,.Lparm # pointer to parameter area - st %r1,IPL_DEVICE-PARMAREA(%r12) # store ipl device number + st %r1,IPL_DEVICE+ARCH_OFFSET-PARMAREA(%r12) # save ipl device number # # load parameter file from ipl device # .Lagain1: - l %r2,INITRD_START-PARMAREA(%r12) # use ramdisk location as temp + l %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # ramdisk loc. is temp bas %r14,.Lloader # load parameter file ltr %r2,%r2 # got anything ? bz .Lnopf @@ -279,7 +281,7 @@ iplstart: bnh .Lnotrunc la %r2,895 .Lnotrunc: - l %r4,INITRD_START-PARMAREA(%r12) + l %r4,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) clc 0(3,%r4),.L_hdr # if it is HDRx bz .Lagain1 # skip dataset header clc 0(3,%r4),.L_eof # if it is EOFx @@ -322,14 +324,14 @@ iplstart: # load ramdisk from ipl device # .Lagain2: - l %r2,INITRD_START-PARMAREA(%r12) # load adr. of ramdisk + l %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # addr of ramdisk bas %r14,.Lloader # load ramdisk - st %r2,INITRD_SIZE-PARMAREA(%r12) # store size of ramdisk + st %r2,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r12) # store size of ramdisk ltr %r2,%r2 bnz .Lrdcont - st %r2,INITRD_START-PARMAREA(%r12) # no ramdisk found, null it + st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # no ramdisk found .Lrdcont: - l %r2,INITRD_START-PARMAREA(%r12) + l %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) clc 0(3,%r2),.L_hdr # skip HDRx and EOFx bz .Lagain2 @@ -432,10 +434,10 @@ start: la %r3,1(%r3) .done: l %r1,.memsize - st %r3,0(%r1) + st %r3,ARCH_OFFSET(%r1) slr %r0,%r0 - st %r0,INITRD_SIZE-PARMAREA(%r11) - st %r0,INITRD_START-PARMAREA(%r11) + st %r0,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r11) + st %r0,INITRD_START+ARCH_OFFSET-PARMAREA(%r11) j startup # continue with startup .tbl: .long _ebcasc # translate table .cmd: .long COMMAND_LINE # address of command line buffer @@ -478,304 +480,23 @@ start: .byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7 .byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff -# -# startup-code at 0x10000, running in real mode -# this is called either by the ipl loader or directly by PSW restart -# or linload or SALIPL -# - .org 0x10000 -startup:basr %r13,0 # get base -.LPG1: l %r1, .Lget_ipl_device_addr-.LPG1(%r13) - basr %r14, %r1 - lctl %c0,%c15,.Lctl-.LPG1(%r13) # load control registers - la %r12,_pstart-.LPG1(%r13) # pointer to parameter area - # move IPL device to lowcore - mvc __LC_IPLDEV(4),IPL_DEVICE-PARMAREA(%r12) - -# -# clear bss memory -# - l %r2,.Lbss_bgn-.LPG1(%r13) # start of bss - l %r3,.Lbss_end-.LPG1(%r13) # end of bss - sr %r3,%r2 # length of bss - sr %r4,%r4 # - sr %r5,%r5 # set src,length and pad to zero - sr %r0,%r0 # - mvcle %r2,%r4,0 # clear mem - jo .-4 # branch back, if not finish - - l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word -.Lservicecall: - stosm .Lpmask-.LPG1(%r13),0x01 # authorize ext interrupts - - stctl %r0, %r0,.Lcr-.LPG1(%r13) # get cr0 - la %r1,0x200 # set bit 22 - o %r1,.Lcr-.LPG1(%r13) # or old cr0 with r1 - st %r1,.Lcr-.LPG1(%r13) - lctl %r0, %r0,.Lcr-.LPG1(%r13) # load modified cr0 - - mvc __LC_EXT_NEW_PSW(8),.Lpcext-.LPG1(%r13) # set postcall psw - la %r1, .Lsclph-.LPG1(%r13) - a %r1,__LC_EXT_NEW_PSW+4 # set handler - st %r1,__LC_EXT_NEW_PSW+4 - - la %r4,_pstart-.LPG1(%r13) # %r4 is our index for sccb stuff - la %r1, .Lsccb-PARMAREA(%r4) # our sccb - .insn rre,0xb2200000,%r2,%r1 # service call - ipm %r1 - srl %r1,28 # get cc code - xr %r3, %r3 - chi %r1,3 - be .Lfchunk-.LPG1(%r13) # leave - chi %r1,2 - be .Lservicecall-.LPG1(%r13) - lpsw .Lwaitsclp-.LPG1(%r13) -.Lsclph: - lh %r1,.Lsccbr-PARMAREA(%r4) - chi %r1,0x10 # 0x0010 is the sucess code - je .Lprocsccb # let's process the sccb - chi %r1,0x1f0 - bne .Lfchunk-.LPG1(%r13) # unhandled error code - c %r2, .Lrcp-.LPG1(%r13) # Did we try Read SCP forced - bne .Lfchunk-.LPG1(%r13) # if no, give up - l %r2, .Lrcp2-.LPG1(%r13) # try with Read SCP - b .Lservicecall-.LPG1(%r13) -.Lprocsccb: - lhi %r1,0 - icm %r1,3,.Lscpincr1-PARMAREA(%r4) # use this one if != 0 - jnz .Lscnd - lhi %r1,0x800 # otherwise report 2GB -.Lscnd: - lhi %r3,0x800 # limit reported memory size to 2GB - cr %r1,%r3 - jl .Lno2gb - lr %r1,%r3 -.Lno2gb: - xr %r3,%r3 # same logic - ic %r3,.Lscpa1-PARMAREA(%r4) - chi %r3,0x00 - jne .Lcompmem - l %r3,.Lscpa2-PARMAREA(%r13) -.Lcompmem: - mr %r2,%r1 # mem in MB on 128-bit - l %r1,.Lonemb-.LPG1(%r13) - mr %r2,%r1 # mem size in bytes in %r3 - b .Lfchunk-.LPG1(%r13) - - .align 4 -.Lget_ipl_device_addr: - .long .Lget_ipl_device -.Lpmask: - .byte 0 -.align 8 -.Lpcext:.long 0x00080000,0x80000000 -.Lcr: - .long 0x00 # place holder for cr0 -.Lwaitsclp: - .long 0x020A0000 - .long .Lsclph -.Lrcp: - .int 0x00120001 # Read SCP forced code -.Lrcp2: - .int 0x00020001 # Read SCP code -.Lonemb: - .int 0x100000 -.Lfchunk: - -# -# find memory chunks. -# - lr %r9,%r3 # end of mem - mvc __LC_PGM_NEW_PSW(8),.Lpcmem-.LPG1(%r13) - la %r1,1 # test in increments of 128KB - sll %r1,17 - l %r3,.Lmchunk-.LPG1(%r13) # get pointer to memory_chunk array - slr %r4,%r4 # set start of chunk to zero - slr %r5,%r5 # set end of chunk to zero - slr %r6,%r6 # set access code to zero - la %r10, MEMORY_CHUNKS # number of chunks -.Lloop: - tprot 0(%r5),0 # test protection of first byte - ipm %r7 - srl %r7,28 - clr %r6,%r7 # compare cc with last access code - be .Lsame-.LPG1(%r13) - b .Lchkmem-.LPG1(%r13) -.Lsame: - ar %r5,%r1 # add 128KB to end of chunk - bno .Lloop-.LPG1(%r13) # r1 < 0x80000000 -> loop -.Lchkmem: # > 2GB or tprot got a program check - clr %r4,%r5 # chunk size > 0? - be .Lchkloop-.LPG1(%r13) - st %r4,0(%r3) # store start address of chunk - lr %r0,%r5 - slr %r0,%r4 - st %r0,4(%r3) # store size of chunk - st %r6,8(%r3) # store type of chunk - la %r3,12(%r3) - l %r4,.Lmemsize-.LPG1(%r13) # address of variable memory_size - st %r5,0(%r4) # store last end to memory size - ahi %r10,-1 # update chunk number -.Lchkloop: - lr %r6,%r7 # set access code to last cc - # we got an exception or we're starting a new - # chunk , we must check if we should - # still try to find valid memory (if we detected - # the amount of available storage), and if we - # have chunks left - xr %r0,%r0 - clr %r0,%r9 # did we detect memory? - je .Ldonemem # if not, leave - chi %r10,0 # do we have chunks left? - je .Ldonemem - alr %r5,%r1 # add 128KB to end of chunk - lr %r4,%r5 # potential new chunk - clr %r5,%r9 # should we go on? - jl .Lloop -.Ldonemem: - l %r12,.Lmflags-.LPG1(%r13) # get address of machine_flags -# -# find out if we are running under VM -# - stidp __LC_CPUID # store cpuid - tm __LC_CPUID,0xff # running under VM ? - bno .Lnovm-.LPG1(%r13) - oi 3(%r12),1 # set VM flag -.Lnovm: - lh %r0,__LC_CPUID+4 # get cpu version - chi %r0,0x7490 # running on a P/390 ? - bne .Lnop390-.LPG1(%r13) - oi 3(%r12),4 # set P/390 flag -.Lnop390: - -# -# find out if we have an IEEE fpu -# - mvc __LC_PGM_NEW_PSW(8),.Lpcfpu-.LPG1(%r13) - efpc %r0,0 # test IEEE extract fpc instruction - oi 3(%r12),2 # set IEEE fpu flag -.Lchkfpu: - -# -# find out if we have the CSP instruction -# - mvc __LC_PGM_NEW_PSW(8),.Lpccsp-.LPG1(%r13) - la %r0,0 - lr %r1,%r0 - la %r2,4 - csp %r0,%r2 # Test CSP instruction - oi 3(%r12),8 # set CSP flag -.Lchkcsp: - -# -# find out if we have the MVPG instruction -# - mvc __LC_PGM_NEW_PSW(8),.Lpcmvpg-.LPG1(%r13) - sr %r0,%r0 - la %r1,0 - la %r2,0 - mvpg %r1,%r2 # Test CSP instruction - oi 3(%r12),16 # set MVPG flag -.Lchkmvpg: - -# -# find out if we have the IDTE instruction -# - mvc __LC_PGM_NEW_PSW(8),.Lpcidte-.LPG1(%r13) - .long 0xb2b10000 # store facility list - tm 0xc8,0x08 # check bit for clearing-by-ASCE - bno .Lchkidte-.LPG1(%r13) - lhi %r1,2094 - lhi %r2,0 - .long 0xb98e2001 - oi 3(%r12),0x80 # set IDTE flag -.Lchkidte: - - lpsw .Lentry-.LPG1(13) # jump to _stext in primary-space, - # virtual and never return ... - .align 8 -.Lentry:.long 0x00080000,0x80000000 + _stext -.Lctl: .long 0x04b50002 # cr0: various things - .long 0 # cr1: primary space segment table - .long .Lduct # cr2: dispatchable unit control table - .long 0 # cr3: instruction authorization - .long 0 # cr4: instruction authorization - .long 0xffffffff # cr5: primary-aste origin - .long 0 # cr6: I/O interrupts - .long 0 # cr7: secondary space segment table - .long 0 # cr8: access registers translation - .long 0 # cr9: tracing off - .long 0 # cr10: tracing off - .long 0 # cr11: tracing off - .long 0 # cr12: tracing off - .long 0 # cr13: home space segment table - .long 0xc0000000 # cr14: machine check handling off - .long 0 # cr15: linkage stack operations -.Lpcmem:.long 0x00080000,0x80000000 + .Lchkmem -.Lpcfpu:.long 0x00080000,0x80000000 + .Lchkfpu -.Lpccsp:.long 0x00080000,0x80000000 + .Lchkcsp -.Lpcmvpg:.long 0x00080000,0x80000000 + .Lchkmvpg -.Lpcidte:.long 0x00080000,0x80000000 + .Lchkidte -.Lmemsize:.long memory_size -.Lmchunk:.long memory_chunk -.Lmflags:.long machine_flags -.Lbss_bgn: .long __bss_start -.Lbss_end: .long _end - - .org PARMAREA-64 -.Lduct: .long 0,0,0,0,0,0,0,0 - .long 0,0,0,0,0,0,0,0 - -# -# params at 10400 (setup.h) -# - .org PARMAREA - .global _pstart -_pstart: - .long 0,0 # IPL_DEVICE - .long 0,RAMDISK_ORIGIN # INITRD_START - .long 0,RAMDISK_SIZE # INITRD_SIZE - - .org COMMAND_LINE - .byte "root=/dev/ram0 ro" - .byte 0 - .org 0x11000 -.Lsccb: - .hword 0x1000 # length, one page - .byte 0x00,0x00,0x00 - .byte 0x80 # variable response bit set -.Lsccbr: - .hword 0x00 # response code -.Lscpincr1: - .hword 0x00 -.Lscpa1: - .byte 0x00 - .fill 89,1,0 -.Lscpa2: - .int 0x00 -.Lscpincr2: - .quad 0x00 - .fill 3984,1,0 - .org 0x12000 - .global _pend -_pend: - +.macro GET_IPL_DEVICE .Lget_ipl_device: basr %r12,0 -.LPG2: l %r1,0xb8 # get sid +.LGID: l %r1,0xb8 # get sid sll %r1,15 # test if subchannel is enabled srl %r1,31 ltr %r1,%r1 bz 0(%r14) # subchannel disabled l %r1,0xb8 - la %r5,.Lipl_schib-.LPG2(%r12) + la %r5,.Lipl_schib-.LGID(%r12) stsch 0(%r5) # get schib of subchannel bnz 0(%r14) # schib not available tm 5(%r5),0x01 # devno valid? bno 0(%r14) - la %r6,ipl_parameter_flags-.LPG2(%r12) + la %r6,ipl_parameter_flags-.LGID(%r12) oi 3(%r6),0x01 # set flag - la %r2,ipl_devno-.LPG2(%r12) + la %r2,ipl_devno-.LGID(%r12) mvc 0(2,%r2),6(%r5) # store devno tm 4(%r5),0x80 # qdio capable device? bno 0(%r14) @@ -816,46 +537,10 @@ ipl_parameter_flags: .globl ipl_devno ipl_devno: .word 0 +.endm -#ifdef CONFIG_SHARED_KERNEL - .org 0x100000 +#ifdef CONFIG_ARCH_S390X +#include "head64.S" +#else +#include "head31.S" #endif - -# -# startup-code, running in virtual mode -# - .globl _stext -_stext: basr %r13,0 # get base -.LPG3: -# -# Setup stack -# - l %r15,.Linittu-.LPG3(%r13) - mvc __LC_CURRENT(4),__TI_task(%r15) - ahi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE - st %r15,__LC_KERNEL_STACK # set end of kernel stack - ahi %r15,-96 - xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain - -# check control registers - stctl %c0,%c15,0(%r15) - oi 2(%r15),0x40 # enable sigp emergency signal - oi 0(%r15),0x10 # switch on low address protection - lctl %c0,%c15,0(%r15) - -# - lam 0,15,.Laregs-.LPG3(%r13) # load access regs needed by uaccess - l %r14,.Lstart-.LPG3(%r13) - basr %r14,%r14 # call start_kernel -# -# We returned from start_kernel ?!? PANIK -# - basr %r13,0 - lpsw .Ldw-.(%r13) # load disabled wait psw -# - .align 8 -.Ldw: .long 0x000a0000,0x00000000 -.Linittu: .long init_thread_union -.Lstart: .long start_kernel -.Laregs: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 - diff --git a/arch/s390/kernel/head31.S b/arch/s390/kernel/head31.S new file mode 100644 index 0000000..2d3b089 --- /dev/null +++ b/arch/s390/kernel/head31.S @@ -0,0 +1,336 @@ +/* + * arch/s390/kernel/head31.S + * + * (C) Copyright IBM Corp. 2005 + * + * Author(s): Hartmut Penner <hp@de.ibm.com> + * Martin Schwidefsky <schwidefsky@de.ibm.com> + * Rob van der Heij <rvdhei@iae.nl> + * Heiko Carstens <heiko.carstens@de.ibm.com> + * + */ + +# +# startup-code at 0x10000, running in absolute addressing mode +# this is called either by the ipl loader or directly by PSW restart +# or linload or SALIPL +# + .org 0x10000 +startup:basr %r13,0 # get base +.LPG1: l %r1, .Lget_ipl_device_addr-.LPG1(%r13) + basr %r14, %r1 + lctl %c0,%c15,.Lctl-.LPG1(%r13) # load control registers + la %r12,_pstart-.LPG1(%r13) # pointer to parameter area + # move IPL device to lowcore + mvc __LC_IPLDEV(4),IPL_DEVICE-PARMAREA(%r12) + +# +# clear bss memory +# + l %r2,.Lbss_bgn-.LPG1(%r13) # start of bss + l %r3,.Lbss_end-.LPG1(%r13) # end of bss + sr %r3,%r2 # length of bss + sr %r4,%r4 + sr %r5,%r5 # set src,length and pad to zero + sr %r0,%r0 + mvcle %r2,%r4,0 # clear mem + jo .-4 # branch back, if not finish + + l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word +.Lservicecall: + stosm .Lpmask-.LPG1(%r13),0x01 # authorize ext interrupts + + stctl %r0, %r0,.Lcr-.LPG1(%r13) # get cr0 + la %r1,0x200 # set bit 22 + o %r1,.Lcr-.LPG1(%r13) # or old cr0 with r1 + st %r1,.Lcr-.LPG1(%r13) + lctl %r0, %r0,.Lcr-.LPG1(%r13) # load modified cr0 + + mvc __LC_EXT_NEW_PSW(8),.Lpcext-.LPG1(%r13) # set postcall psw + la %r1, .Lsclph-.LPG1(%r13) + a %r1,__LC_EXT_NEW_PSW+4 # set handler + st %r1,__LC_EXT_NEW_PSW+4 + + la %r4,_pstart-.LPG1(%r13) # %r4 is our index for sccb stuff + la %r1, .Lsccb-PARMAREA(%r4) # our sccb + .insn rre,0xb2200000,%r2,%r1 # service call + ipm %r1 + srl %r1,28 # get cc code + xr %r3, %r3 + chi %r1,3 + be .Lfchunk-.LPG1(%r13) # leave + chi %r1,2 + be .Lservicecall-.LPG1(%r13) + lpsw .Lwaitsclp-.LPG1(%r13) +.Lsclph: + lh %r1,.Lsccbr-PARMAREA(%r4) + chi %r1,0x10 # 0x0010 is the sucess code + je .Lprocsccb # let's process the sccb + chi %r1,0x1f0 + bne .Lfchunk-.LPG1(%r13) # unhandled error code + c %r2, .Lrcp-.LPG1(%r13) # Did we try Read SCP forced + bne .Lfchunk-.LPG1(%r13) # if no, give up + l %r2, .Lrcp2-.LPG1(%r13) # try with Read SCP + b .Lservicecall-.LPG1(%r13) +.Lprocsccb: + lhi %r1,0 + icm %r1,3,.Lscpincr1-PARMAREA(%r4) # use this one if != 0 + jnz .Lscnd + lhi %r1,0x800 # otherwise report 2GB +.Lscnd: + lhi %r3,0x800 # limit reported memory size to 2GB + cr %r1,%r3 + jl .Lno2gb + lr %r1,%r3 +.Lno2gb: + xr %r3,%r3 # same logic + ic %r3,.Lscpa1-PARMAREA(%r4) + chi %r3,0x00 + jne .Lcompmem + l %r3,.Lscpa2-PARMAREA(%r13) +.Lcompmem: + mr %r2,%r1 # mem in MB on 128-bit + l %r1,.Lonemb-.LPG1(%r13) + mr %r2,%r1 # mem size in bytes in %r3 + b .Lfchunk-.LPG1(%r13) + + .align 4 +.Lget_ipl_device_addr: + .long .Lget_ipl_device +.Lpmask: + .byte 0 +.align 8 +.Lpcext:.long 0x00080000,0x80000000 +.Lcr: + .long 0x00 # place holder for cr0 +.Lwaitsclp: + .long 0x010a0000,0x80000000 + .Lsclph +.Lrcp: + .int 0x00120001 # Read SCP forced code +.Lrcp2: + .int 0x00020001 # Read SCP code +.Lonemb: + .int 0x100000 +.Lfchunk: + +# +# find memory chunks. +# + lr %r9,%r3 # end of mem + mvc __LC_PGM_NEW_PSW(8),.Lpcmem-.LPG1(%r13) + la %r1,1 # test in increments of 128KB + sll %r1,17 + l %r3,.Lmchunk-.LPG1(%r13) # get pointer to memory_chunk array + slr %r4,%r4 # set start of chunk to zero + slr %r5,%r5 # set end of chunk to zero + slr %r6,%r6 # set access code to zero + la %r10, MEMORY_CHUNKS # number of chunks +.Lloop: + tprot 0(%r5),0 # test protection of first byte + ipm %r7 + srl %r7,28 + clr %r6,%r7 # compare cc with last access code + be .Lsame-.LPG1(%r13) + b .Lchkmem-.LPG1(%r13) +.Lsame: + ar %r5,%r1 # add 128KB to end of chunk + bno .Lloop-.LPG1(%r13) # r1 < 0x80000000 -> loop +.Lchkmem: # > 2GB or tprot got a program check + clr %r4,%r5 # chunk size > 0? + be .Lchkloop-.LPG1(%r13) + st %r4,0(%r3) # store start address of chunk + lr %r0,%r5 + slr %r0,%r4 + st %r0,4(%r3) # store size of chunk + st %r6,8(%r3) # store type of chunk + la %r3,12(%r3) + l %r4,.Lmemsize-.LPG1(%r13) # address of variable memory_size + st %r5,0(%r4) # store last end to memory size + ahi %r10,-1 # update chunk number +.Lchkloop: + lr %r6,%r7 # set access code to last cc + # we got an exception or we're starting a new + # chunk , we must check if we should + # still try to find valid memory (if we detected + # the amount of available storage), and if we + # have chunks left + xr %r0,%r0 + clr %r0,%r9 # did we detect memory? + je .Ldonemem # if not, leave + chi %r10,0 # do we have chunks left? + je .Ldonemem + alr %r5,%r1 # add 128KB to end of chunk + lr %r4,%r5 # potential new chunk + clr %r5,%r9 # should we go on? + jl .Lloop +.Ldonemem: + l %r12,.Lmflags-.LPG1(%r13) # get address of machine_flags +# +# find out if we are running under VM +# + stidp __LC_CPUID # store cpuid + tm __LC_CPUID,0xff # running under VM ? + bno .Lnovm-.LPG1(%r13) + oi 3(%r12),1 # set VM flag +.Lnovm: + lh %r0,__LC_CPUID+4 # get cpu version + chi %r0,0x7490 # running on a P/390 ? + bne .Lnop390-.LPG1(%r13) + oi 3(%r12),4 # set P/390 flag +.Lnop390: + +# +# find out if we have an IEEE fpu +# + mvc __LC_PGM_NEW_PSW(8),.Lpcfpu-.LPG1(%r13) + efpc %r0,0 # test IEEE extract fpc instruction + oi 3(%r12),2 # set IEEE fpu flag +.Lchkfpu: + +# +# find out if we have the CSP instruction +# + mvc __LC_PGM_NEW_PSW(8),.Lpccsp-.LPG1(%r13) + la %r0,0 + lr %r1,%r0 + la %r2,4 + csp %r0,%r2 # Test CSP instruction + oi 3(%r12),8 # set CSP flag +.Lchkcsp: + +# +# find out if we have the MVPG instruction +# + mvc __LC_PGM_NEW_PSW(8),.Lpcmvpg-.LPG1(%r13) + sr %r0,%r0 + la %r1,0 + la %r2,0 + mvpg %r1,%r2 # Test CSP instruction + oi 3(%r12),16 # set MVPG flag +.Lchkmvpg: + +# +# find out if we have the IDTE instruction +# + mvc __LC_PGM_NEW_PSW(8),.Lpcidte-.LPG1(%r13) + .long 0xb2b10000 # store facility list + tm 0xc8,0x08 # check bit for clearing-by-ASCE + bno .Lchkidte-.LPG1(%r13) + lhi %r1,2094 + lhi %r2,0 + .long 0xb98e2001 + oi 3(%r12),0x80 # set IDTE flag +.Lchkidte: + + lpsw .Lentry-.LPG1(13) # jump to _stext in primary-space, + # virtual and never return ... + .align 8 +.Lentry:.long 0x00080000,0x80000000 + _stext +.Lctl: .long 0x04b50002 # cr0: various things + .long 0 # cr1: primary space segment table + .long .Lduct # cr2: dispatchable unit control table + .long 0 # cr3: instruction authorization + .long 0 # cr4: instruction authorization + .long 0xffffffff # cr5: primary-aste origin + .long 0 # cr6: I/O interrupts + .long 0 # cr7: secondary space segment table + .long 0 # cr8: access registers translation + .long 0 # cr9: tracing off + .long 0 # cr10: tracing off + .long 0 # cr11: tracing off + .long 0 # cr12: tracing off + .long 0 # cr13: home space segment table + .long 0xc0000000 # cr14: machine check handling off + .long 0 # cr15: linkage stack operations +.Lpcmem:.long 0x00080000,0x80000000 + .Lchkmem +.Lpcfpu:.long 0x00080000,0x80000000 + .Lchkfpu +.Lpccsp:.long 0x00080000,0x80000000 + .Lchkcsp +.Lpcmvpg:.long 0x00080000,0x80000000 + .Lchkmvpg +.Lpcidte:.long 0x00080000,0x80000000 + .Lchkidte +.Lmemsize:.long memory_size +.Lmchunk:.long memory_chunk +.Lmflags:.long machine_flags +.Lbss_bgn: .long __bss_start +.Lbss_end: .long _end + + .org PARMAREA-64 +.Lduct: .long 0,0,0,0,0,0,0,0 + .long 0,0,0,0,0,0,0,0 + +# +# params at 10400 (setup.h) +# + .org PARMAREA + .global _pstart +_pstart: + .long 0,0 # IPL_DEVICE + .long 0,RAMDISK_ORIGIN # INITRD_START + .long 0,RAMDISK_SIZE # INITRD_SIZE + + .org COMMAND_LINE + .byte "root=/dev/ram0 ro" + .byte 0 + .org 0x11000 +.Lsccb: + .hword 0x1000 # length, one page + .byte 0x00,0x00,0x00 + .byte 0x80 # variable response bit set +.Lsccbr: + .hword 0x00 # response code +.Lscpincr1: + .hword 0x00 +.Lscpa1: + .byte 0x00 + .fill 89,1,0 +.Lscpa2: + .int 0x00 +.Lscpincr2: + .quad 0x00 + .fill 3984,1,0 + .org 0x12000 + .global _pend +_pend: + + GET_IPL_DEVICE + +#ifdef CONFIG_SHARED_KERNEL + .org 0x100000 +#endif + +# +# startup-code, running in virtual mode +# + .globl _stext +_stext: basr %r13,0 # get base +.LPG3: +# +# Setup stack +# + l %r15,.Linittu-.LPG3(%r13) + mvc __LC_CURRENT(4),__TI_task(%r15) + ahi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union+THREAD_SIZE + st %r15,__LC_KERNEL_STACK # set end of kernel stack + ahi %r15,-96 + xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain + +# check control registers + stctl %c0,%c15,0(%r15) + oi 2(%r15),0x40 # enable sigp emergency signal + oi 0(%r15),0x10 # switch on low address protection + lctl %c0,%c15,0(%r15) + +# + lam 0,15,.Laregs-.LPG3(%r13) # load access regs needed by uaccess + l %r14,.Lstart-.LPG3(%r13) + basr %r14,%r14 # call start_kernel +# +# We returned from start_kernel ?!? PANIK +# + basr %r13,0 + lpsw .Ldw-.(%r13) # load disabled wait psw +# + .align 8 +.Ldw: .long 0x000a0000,0x00000000 +.Linittu:.long init_thread_union +.Lstart:.long start_kernel +.Laregs:.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S index 193aafa..f08c06f 100644 --- a/arch/s390/kernel/head64.S +++ b/arch/s390/kernel/head64.S @@ -1,482 +1,17 @@ /* - * arch/s390/kernel/head.S + * arch/s390/kernel/head64.S * - * S390 version - * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Hartmut Penner (hp@de.ibm.com), - * Martin Schwidefsky (schwidefsky@de.ibm.com), - * Rob van der Heij (rvdhei@iae.nl) + * (C) Copyright IBM Corp. 1999,2005 + * + * Author(s): Hartmut Penner <hp@de.ibm.com> + * Martin Schwidefsky <schwidefsky@de.ibm.com> + * Rob van der Heij <rvdhei@iae.nl> + * Heiko Carstens <heiko.carstens@de.ibm.com> * - * There are 5 different IPL methods - * 1) load the image directly into ram at address 0 and do an PSW restart - * 2) linload will load the image from address 0x10000 to memory 0x10000 - * and start the code thru LPSW 0x0008000080010000 (VM only, deprecated) - * 3) generate the tape ipl header, store the generated image on a tape - * and ipl from it - * In case of SL tape you need to IPL 5 times to get past VOL1 etc - * 4) generate the vm reader ipl header, move the generated image to the - * VM reader (use option NOH!) and do a ipl from reader (VM only) - * 5) direct call of start by the SALIPL loader - * We use the cpuid to distinguish between VM and native ipl - * params for kernel are pushed to 0x10400 (see setup.h) - - Changes: - Okt 25 2000 <rvdheij@iae.nl> - added code to skip HDR and EOF to allow SL tape IPL (5 retries) - changed first CCW from rewind to backspace block - */ -#include <linux/config.h> -#include <asm/setup.h> -#include <asm/lowcore.h> -#include <asm/asm-offsets.h> -#include <asm/thread_info.h> -#include <asm/page.h> - -#ifndef CONFIG_IPL - .org 0 - .long 0x00080000,0x80000000+startup # Just a restart PSW -#else -#ifdef CONFIG_IPL_TAPE -#define IPL_BS 1024 - .org 0 - .long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded - .long 0x27000000,0x60000001 # by ipl to addresses 0-23. - .long 0x02000000,0x20000000+IPL_BS # (a PSW and two CCWs). - .long 0x00000000,0x00000000 # external old psw - .long 0x00000000,0x00000000 # svc old psw - .long 0x00000000,0x00000000 # program check old psw - .long 0x00000000,0x00000000 # machine check old psw - .long 0x00000000,0x00000000 # io old psw - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x00000000,0x00000000 - .long 0x000a0000,0x00000058 # external new psw - .long 0x000a0000,0x00000060 # svc new psw - .long 0x000a0000,0x00000068 # program check new psw - .long 0x000a0000,0x00000070 # machine check new psw - .long 0x00080000,0x80000000+.Lioint # io new psw - - .org 0x100 -# -# subroutine for loading from tape -# Paramters: -# R1 = device number -# R2 = load address -.Lloader: - st %r14,.Lldret - la %r3,.Lorbread # r3 = address of orb - la %r5,.Lirb # r5 = address of irb - st %r2,.Lccwread+4 # initialize CCW data addresses - lctl %c6,%c6,.Lcr6 - slr %r2,%r2 -.Lldlp: - la %r6,3 # 3 retries -.Lssch: - ssch 0(%r3) # load chunk of IPL_BS bytes - bnz .Llderr -.Lw4end: - bas %r14,.Lwait4io - tm 8(%r5),0x82 # do we have a problem ? - bnz .Lrecov - slr %r7,%r7 - icm %r7,3,10(%r5) # get residual count - lcr %r7,%r7 - la %r7,IPL_BS(%r7) # IPL_BS-residual=#bytes read - ar %r2,%r7 # add to total size - tm 8(%r5),0x01 # found a tape mark ? - bnz .Ldone - l %r0,.Lccwread+4 # update CCW data addresses - ar %r0,%r7 - st %r0,.Lccwread+4 - b .Lldlp -.Ldone: - l %r14,.Lldret - br %r14 # r2 contains the total size -.Lrecov: - bas %r14,.Lsense # do the sensing - bct %r6,.Lssch # dec. retry count & branch - b .Llderr -# -# Sense subroutine -# -.Lsense: - st %r14,.Lsnsret - la %r7,.Lorbsense - ssch 0(%r7) # start sense command - bnz .Llderr - bas %r14,.Lwait4io - l %r14,.Lsnsret - tm 8(%r5),0x82 # do we have a problem ? - bnz .Llderr - br %r14 -# -# Wait for interrupt subroutine -# -.Lwait4io: - lpsw .Lwaitpsw -.Lioint: - c %r1,0xb8 # compare subchannel number - bne .Lwait4io - tsch 0(%r5) - slr %r0,%r0 - tm 8(%r5),0x82 # do we have a problem ? - bnz .Lwtexit - tm 8(%r5),0x04 # got device end ? - bz .Lwait4io -.Lwtexit: - br %r14 -.Llderr: - lpsw .Lcrash - - .align 8 -.Lorbread: - .long 0x00000000,0x0080ff00,.Lccwread - .align 8 -.Lorbsense: - .long 0x00000000,0x0080ff00,.Lccwsense - .align 8 -.Lccwread: - .long 0x02200000+IPL_BS,0x00000000 -.Lccwsense: - .long 0x04200001,0x00000000 -.Lwaitpsw: - .long 0x020a0000,0x80000000+.Lioint - -.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 -.Lcr6: .long 0xff000000 - .align 8 -.Lcrash:.long 0x000a0000,0x00000000 -.Lldret:.long 0 -.Lsnsret: .long 0 -#endif /* CONFIG_IPL_TAPE */ - -#ifdef CONFIG_IPL_VM -#define IPL_BS 0x730 - .org 0 - .long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded - .long 0x02000018,0x60000050 # by ipl to addresses 0-23. - .long 0x02000068,0x60000050 # (a PSW and two CCWs). - .fill 80-24,1,0x40 # bytes 24-79 are discarded !! - .long 0x020000f0,0x60000050 # The next 160 byte are loaded - .long 0x02000140,0x60000050 # to addresses 0x18-0xb7 - .long 0x02000190,0x60000050 # They form the continuation - .long 0x020001e0,0x60000050 # of the CCW program started - .long 0x02000230,0x60000050 # by ipl and load the range - .long 0x02000280,0x60000050 # 0x0f0-0x730 from the image - .long 0x020002d0,0x60000050 # to the range 0x0f0-0x730 - .long 0x02000320,0x60000050 # in memory. At the end of - .long 0x02000370,0x60000050 # the channel program the PSW - .long 0x020003c0,0x60000050 # at location 0 is loaded. - .long 0x02000410,0x60000050 # Initial processing starts - .long 0x02000460,0x60000050 # at 0xf0 = iplstart. - .long 0x020004b0,0x60000050 - .long 0x02000500,0x60000050 - .long 0x02000550,0x60000050 - .long 0x020005a0,0x60000050 - .long 0x020005f0,0x60000050 - .long 0x02000640,0x60000050 - .long 0x02000690,0x60000050 - .long 0x020006e0,0x20000050 - - .org 0xf0 -# -# subroutine for loading cards from the reader -# -.Lloader: - la %r3,.Lorb # r2 = address of orb into r2 - la %r5,.Lirb # r4 = address of irb - la %r6,.Lccws - la %r7,20 -.Linit: - st %r2,4(%r6) # initialize CCW data addresses - la %r2,0x50(%r2) - la %r6,8(%r6) - bct 7,.Linit - - lctl %c6,%c6,.Lcr6 # set IO subclass mask - slr %r2,%r2 -.Lldlp: - ssch 0(%r3) # load chunk of 1600 bytes - bnz .Llderr -.Lwait4irq: - mvc 0x78(8),.Lnewpsw # set up IO interrupt psw - lpsw .Lwaitpsw -.Lioint: - c %r1,0xb8 # compare subchannel number - bne .Lwait4irq - tsch 0(%r5) - - slr %r0,%r0 - ic %r0,8(%r5) # get device status - chi %r0,8 # channel end ? - be .Lcont - chi %r0,12 # channel end + device end ? - be .Lcont - - l %r0,4(%r5) - s %r0,8(%r3) # r0/8 = number of ccws executed - mhi %r0,10 # *10 = number of bytes in ccws - lh %r3,10(%r5) # get residual count - sr %r0,%r3 # #ccws*80-residual=#bytes read - ar %r2,%r0 - - br %r14 # r2 contains the total size - -.Lcont: - ahi %r2,0x640 # add 0x640 to total size - la %r6,.Lccws - la %r7,20 -.Lincr: - l %r0,4(%r6) # update CCW data addresses - ahi %r0,0x640 - st %r0,4(%r6) - ahi %r6,8 - bct 7,.Lincr - - b .Lldlp -.Llderr: - lpsw .Lcrash - - .align 8 -.Lorb: .long 0x00000000,0x0080ff00,.Lccws -.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 -.Lcr6: .long 0xff000000 -.Lloadp:.long 0,0 - .align 8 -.Lcrash:.long 0x000a0000,0x00000000 -.Lnewpsw: - .long 0x00080000,0x80000000+.Lioint -.Lwaitpsw: - .long 0x020a0000,0x80000000+.Lioint - - .align 8 -.Lccws: .rept 19 - .long 0x02600050,0x00000000 - .endr - .long 0x02200050,0x00000000 -#endif /* CONFIG_IPL_VM */ - -iplstart: - lh %r1,0xb8 # test if subchannel number - bct %r1,.Lnoload # is valid - l %r1,0xb8 # load ipl subchannel number - la %r2,IPL_BS # load start address - bas %r14,.Lloader # load rest of ipl image - larl %r12,_pstart # pointer to parameter area - st %r1,IPL_DEVICE+4-PARMAREA(%r12) # store ipl device number - -# -# load parameter file from ipl device # -.Lagain1: - l %r2,INITRD_START+4-PARMAREA(%r12)# use ramdisk location as temp - bas %r14,.Lloader # load parameter file - ltr %r2,%r2 # got anything ? - bz .Lnopf - chi %r2,895 - bnh .Lnotrunc - la %r2,895 -.Lnotrunc: - l %r4,INITRD_START+4-PARMAREA(%r12) - clc 0(3,%r4),.L_hdr # if it is HDRx - bz .Lagain1 # skip dataset header - clc 0(3,%r4),.L_eof # if it is EOFx - bz .Lagain1 # skip dateset trailer - la %r5,0(%r4,%r2) - lr %r3,%r2 -.Lidebc: - tm 0(%r5),0x80 # high order bit set ? - bo .Ldocv # yes -> convert from EBCDIC - ahi %r5,-1 - bct %r3,.Lidebc - b .Lnocv -.Ldocv: - l %r3,.Lcvtab - tr 0(256,%r4),0(%r3) # convert parameters to ascii - tr 256(256,%r4),0(%r3) - tr 512(256,%r4),0(%r3) - tr 768(122,%r4),0(%r3) -.Lnocv: la %r3,COMMAND_LINE-PARMAREA(%r12) # load adr. of command line - mvc 0(256,%r3),0(%r4) - mvc 256(256,%r3),256(%r4) - mvc 512(256,%r3),512(%r4) - mvc 768(122,%r3),768(%r4) - slr %r0,%r0 - b .Lcntlp -.Ldelspc: - ic %r0,0(%r2,%r3) - chi %r0,0x20 # is it a space ? - be .Lcntlp - ahi %r2,1 - b .Leolp -.Lcntlp: - brct %r2,.Ldelspc -.Leolp: - slr %r0,%r0 - stc %r0,0(%r2,%r3) # terminate buffer -.Lnopf: - -# -# load ramdisk from ipl device -# -.Lagain2: - l %r2,INITRD_START+4-PARMAREA(%r12)# load adr. of ramdisk - bas %r14,.Lloader # load ramdisk - st %r2,INITRD_SIZE+4-PARMAREA(%r12) # store size of ramdisk - ltr %r2,%r2 - bnz .Lrdcont - st %r2,INITRD_START+4-PARMAREA(%r12)# no ramdisk found, null it -.Lrdcont: - l %r2,INITRD_START+4-PARMAREA(%r12) - clc 0(3,%r2),.L_hdr # skip HDRx and EOFx - bz .Lagain2 - clc 0(3,%r2),.L_eof - bz .Lagain2 - -#ifdef CONFIG_IPL_VM -# -# reset files in VM reader -# - stidp __LC_CPUID # store cpuid - tm __LC_CPUID,0xff # running VM ? - bno .Lnoreset - la %r2,.Lreset - lhi %r3,26 - diag %r2,%r3,8 - la %r5,.Lirb - stsch 0(%r5) # check if irq is pending - tm 30(%r5),0x0f # by verifying if any of the - bnz .Lwaitforirq # activity or status control - tm 31(%r5),0xff # bits is set in the schib - bz .Lnoreset -.Lwaitforirq: - mvc 0x78(8),.Lrdrnewpsw # set up IO interrupt psw -.Lwaitrdrirq: - lpsw .Lrdrwaitpsw -.Lrdrint: - c %r1,0xb8 # compare subchannel number - bne .Lwaitrdrirq - la %r5,.Lirb - tsch 0(%r5) -.Lnoreset: - b .Lnoload - - .align 8 -.Lrdrnewpsw: - .long 0x00080000,0x80000000+.Lrdrint -.Lrdrwaitpsw: - .long 0x020a0000,0x80000000+.Lrdrint -#endif - -# -# everything loaded, go for it -# -.Lnoload: - l %r1,.Lstartup - br %r1 - -.Lstartup: .long startup -.Lcvtab:.long _ebcasc # ebcdic to ascii table -.Lreset:.byte 0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40 - .byte 0xc1,0xd3,0xd3,0x40,0xd2,0xc5,0xc5,0xd7,0x40,0xd5,0xd6 - .byte 0xc8,0xd6,0xd3,0xc4 # "change rdr all keep nohold" -.L_eof: .long 0xc5d6c600 /* C'EOF' */ -.L_hdr: .long 0xc8c4d900 /* C'HDR' */ -#endif /* CONFIG_IPL */ - -# -# SALIPL loader support. Based on a patch by Rob van der Heij. -# This entry point is called directly from the SALIPL loader and -# doesn't need a builtin ipl record. -# - .org 0x800 - .globl start -start: - stm %r0,%r15,0x07b0 # store registers - basr %r12,%r0 -.base: - l %r11,.parm - l %r8,.cmd # pointer to command buffer - - ltr %r9,%r9 # do we have SALIPL parameters? - bp .sk8x8 - - mvc 0(64,%r8),0x00b0 # copy saved registers - xc 64(240-64,%r8),0(%r8) # remainder of buffer - tr 0(64,%r8),.lowcase - b .gotr -.sk8x8: - mvc 0(240,%r8),0(%r9) # copy iplparms into buffer -.gotr: - l %r10,.tbl # EBCDIC to ASCII table - tr 0(240,%r8),0(%r10) - stidp __LC_CPUID # Are we running on VM maybe - cli __LC_CPUID,0xff - bnz .test - .long 0x83300060 # diag 3,0,x'0060' - storage size - b .done -.test: - mvc 0x68(8),.pgmnw # set up pgm check handler - l %r2,.fourmeg - lr %r3,%r2 - bctr %r3,%r0 # 4M-1 -.loop: iske %r0,%r3 - ar %r3,%r2 -.pgmx: - sr %r3,%r2 - la %r3,1(%r3) -.done: - l %r1,.memsize - st %r3,4(%r1) - slr %r0,%r0 - st %r0,INITRD_SIZE+4-PARMAREA(%r11) - st %r0,INITRD_START+4-PARMAREA(%r11) - j startup # continue with startup -.tbl: .long _ebcasc # translate table -.cmd: .long COMMAND_LINE # address of command line buffer -.parm: .long PARMAREA -.fourmeg: .long 0x00400000 # 4M -.pgmnw: .long 0x00080000,.pgmx -.memsize: .long memory_size -.lowcase: - .byte 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07 - .byte 0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f - .byte 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17 - .byte 0x18,0x19,0x1a,0x1b,0x1c,0x1d,0x1e,0x1f - .byte 0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27 - .byte 0x28,0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f - .byte 0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37 - .byte 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f - .byte 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47 - .byte 0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f - .byte 0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57 - .byte 0x58,0x59,0x5a,0x5b,0x5c,0x5d,0x5e,0x5f - .byte 0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67 - .byte 0x68,0x69,0x6a,0x6b,0x6c,0x6d,0x6e,0x6f - .byte 0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77 - .byte 0x78,0x79,0x7a,0x7b,0x7c,0x7d,0x7e,0x7f - - .byte 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87 - .byte 0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f - .byte 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97 - .byte 0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f - .byte 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7 - .byte 0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf - .byte 0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7 - .byte 0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xbe,0xbf - .byte 0xc0,0x81,0x82,0x83,0x84,0x85,0x86,0x87 # .abcdefg - .byte 0x88,0x89,0xca,0xcb,0xcc,0xcd,0xce,0xcf # hi - .byte 0xd0,0x91,0x92,0x93,0x94,0x95,0x96,0x97 # .jklmnop - .byte 0x98,0x99,0xda,0xdb,0xdc,0xdd,0xde,0xdf # qr - .byte 0xe0,0xe1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7 # ..stuvwx - .byte 0xa8,0xa9,0xea,0xeb,0xec,0xed,0xee,0xef # yz - .byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7 - .byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff - -# -# startup-code at 0x10000, running in real mode +# startup-code at 0x10000, running in absolute addressing mode # this is called either by the ipl loader or directly by PSW restart # or linload or SALIPL # @@ -530,7 +65,7 @@ startup:basr %r13,0 # get base be .Lfchunk-.LPG1(%r13) # leave chi %r1,2 be .Lservicecall-.LPG1(%r13) - lpsw .Lwaitsclp-.LPG1(%r13) + lpswe .Lwaitsclp-.LPG1(%r13) .Lsclph: lh %r1,.Lsccbr-PARMAREA(%r4) chi %r1,0x10 # 0x0010 is the sucess code @@ -567,8 +102,7 @@ startup:basr %r13,0 # get base .Lcr: .quad 0x00 # place holder for cr0 .Lwaitsclp: - .long 0x020A0000 - .quad .Lsclph + .quad 0x0102000180000000,.Lsclph .Lrcp: .int 0x00120001 # Read SCP forced code .Lrcp2: @@ -751,62 +285,7 @@ _pstart: .global _pend _pend: -.Lget_ipl_device: - basr %r12,0 -.LPG2: l %r1,0xb8 # get sid - sll %r1,15 # test if subchannel is enabled - srl %r1,31 - ltr %r1,%r1 - bz 0(%r14) # subchannel disabled - l %r1,0xb8 - la %r5,.Lipl_schib-.LPG2(%r12) - stsch 0(%r5) # get schib of subchannel - bnz 0(%r14) # schib not available - tm 5(%r5),0x01 # devno valid? - bno 0(%r14) - la %r6,ipl_parameter_flags-.LPG2(%r12) - oi 3(%r6),0x01 # set flag - la %r2,ipl_devno-.LPG2(%r12) - mvc 0(2,%r2),6(%r5) # store devno - tm 4(%r5),0x80 # qdio capable device? - bno 0(%r14) - oi 3(%r6),0x02 # set flag - - # copy ipl parameters - - lhi %r0,4096 - l %r2,20(%r0) # get address of parameter list - lhi %r3,IPL_PARMBLOCK_ORIGIN - st %r3,20(%r0) - lhi %r4,1 - cr %r2,%r3 # start parameters < destination ? - jl 0f - lhi %r1,1 # copy direction is upwards - j 1f -0: lhi %r1,-1 # copy direction is downwards - ar %r2,%r0 - ar %r3,%r0 - ar %r2,%r1 - ar %r3,%r1 -1: mvc 0(1,%r3),0(%r2) # finally copy ipl parameters - ar %r3,%r1 - ar %r2,%r1 - sr %r0,%r4 - jne 1b - b 0(%r14) - - .align 4 -.Lipl_schib: - .rept 13 - .long 0 - .endr - - .globl ipl_parameter_flags -ipl_parameter_flags: - .long 0 - .globl ipl_devno -ipl_devno: - .word 0 + GET_IPL_DEVICE #ifdef CONFIG_SHARED_KERNEL .org 0x100000 diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index 9f3dff6..78b64fe5 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -99,15 +99,15 @@ void default_idle(void) { int cpu, rc; + /* CPU is going idle. */ + cpu = smp_processor_id(); + local_irq_disable(); - if (need_resched()) { + if (need_resched()) { local_irq_enable(); - schedule(); - return; - } + return; + } - /* CPU is going idle. */ - cpu = smp_processor_id(); rc = notifier_call_chain(&idle_chain, CPU_IDLE, (void *)(long) cpu); if (rc != NOTIFY_OK && rc != NOTIFY_DONE) BUG(); @@ -120,7 +120,7 @@ void default_idle(void) __ctl_set_bit(8, 15); #ifdef CONFIG_HOTPLUG_CPU - if (cpu_is_offline(smp_processor_id())) + if (cpu_is_offline(cpu)) cpu_die(); #endif @@ -139,8 +139,14 @@ void default_idle(void) void cpu_idle(void) { - for (;;) - default_idle(); + for (;;) { + while (!need_resched()) + default_idle(); + + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + } } void show_regs(struct pt_regs *regs) diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index e13c87b..5856b3f 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -533,6 +533,7 @@ int __devinit start_secondary(void *cpuvoid) { /* Setup the cpu */ cpu_init(); + preempt_disable(); /* init per CPU timer */ init_cpu_timer(); #ifdef CONFIG_VIRT_TIMER diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 9a1d958..c36353e 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -237,6 +237,8 @@ int sysctl_hz_timer = 1; */ static inline void stop_hz_timer(void) { + unsigned long flags; + unsigned long seq, next; __u64 timer, todval; if (sysctl_hz_timer != 0) @@ -257,7 +259,11 @@ static inline void stop_hz_timer(void) * This cpu is going really idle. Set up the clock comparator * for the next event. */ - timer = (__u64) (next_timer_interrupt() - jiffies) + jiffies_64; + next = next_timer_interrupt(); + do { + seq = read_seqbegin_irqsave(&xtime_lock, flags); + timer = (__u64)(next - jiffies) + jiffies_64; + } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); todval = -1ULL; /* Be careful about overflows. */ if (timer < (-1ULL / CLK_TICKS_PER_JIFFY)) { diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c index 6b8703e..c5bd36f 100644 --- a/arch/s390/kernel/traps.c +++ b/arch/s390/kernel/traps.c @@ -57,7 +57,6 @@ int sysctl_userprocess_debug = 0; extern pgm_check_handler_t do_protection_exception; extern pgm_check_handler_t do_dat_exception; -extern pgm_check_handler_t do_pseudo_page_fault; #ifdef CONFIG_PFAULT extern int pfault_init(void); extern void pfault_fini(void); @@ -676,20 +675,6 @@ asmlinkage void kernel_stack_overflow(struct pt_regs * regs) panic("Corrupt kernel stack, can't continue."); } -#ifndef CONFIG_ARCH_S390X -static int -pagex_reboot_event(struct notifier_block *this, unsigned long event, void *ptr) -{ - if (MACHINE_IS_VM) - cpcmd("SET PAGEX OFF", NULL, 0, NULL); - return NOTIFY_DONE; -} - -static struct notifier_block pagex_reboot_notifier = { - .notifier_call = &pagex_reboot_event, -}; -#endif - /* init is done in lowcore.S and head.S */ void __init trap_init(void) @@ -717,9 +702,7 @@ void __init trap_init(void) pgm_check_table[0x11] = &do_dat_exception; pgm_check_table[0x12] = &translation_exception; pgm_check_table[0x13] = &special_op_exception; -#ifndef CONFIG_ARCH_S390X - pgm_check_table[0x14] = &do_pseudo_page_fault; -#else /* CONFIG_ARCH_S390X */ +#ifdef CONFIG_ARCH_S390X pgm_check_table[0x38] = &do_dat_exception; pgm_check_table[0x39] = &do_dat_exception; pgm_check_table[0x3A] = &do_dat_exception; @@ -731,12 +714,10 @@ void __init trap_init(void) pgm_check_table[0x40] = &do_monitor_call; if (MACHINE_IS_VM) { +#ifdef CONFIG_PFAULT /* - * First try to get pfault pseudo page faults going. - * If this isn't available turn on pagex page faults. + * Try to get pfault pseudo page faults going. */ -#ifdef CONFIG_PFAULT - /* request the 0x2603 external interrupt */ if (register_early_external_interrupt(0x2603, pfault_interrupt, &ext_int_pfault) != 0) panic("Couldn't request external interrupt 0x2603"); @@ -748,9 +729,5 @@ void __init trap_init(void) unregister_early_external_interrupt(0x2603, pfault_interrupt, &ext_int_pfault); #endif -#ifndef CONFIG_ARCH_S390X - register_reboot_notifier(&pagex_reboot_notifier); - cpcmd("SET PAGEX ON", NULL, 0, NULL); -#endif } } diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c index c534810..506a33b 100644 --- a/arch/s390/mm/extmem.c +++ b/arch/s390/mm/extmem.c @@ -234,8 +234,8 @@ query_segment_type (struct dcss_segment *seg) rc = 0; out_free: - if (qin) kfree(qin); - if (qout) kfree(qout); + kfree(qin); + kfree(qout); return rc; } @@ -394,7 +394,7 @@ __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long segtype_string[seg->vm_segtype]); goto out; out_free: - kfree (seg); + kfree(seg); out: return rc; } @@ -505,7 +505,7 @@ segment_modify_shared (char *name, int do_nonshared) list_del(&seg->list); dcss_diag(DCSS_PURGESEG, seg->dcss_name, &dummy, &dummy); - kfree (seg); + kfree(seg); out_unlock: spin_unlock(&dcss_lock); return rc; diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 856a971..fb2607c 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -160,7 +160,7 @@ static void do_sigsegv(struct pt_regs *regs, unsigned long error_code, * 11 Page translation -> Not present (nullification) * 3b Region third trans. -> Not present (nullification) */ -extern inline void +static inline void do_exception(struct pt_regs *regs, unsigned long error_code, int is_protection) { struct task_struct *tsk; @@ -352,115 +352,6 @@ void do_dat_exception(struct pt_regs *regs, unsigned long error_code) do_exception(regs, error_code & 0xff, 0); } -#ifndef CONFIG_ARCH_S390X - -typedef struct _pseudo_wait_t { - struct _pseudo_wait_t *next; - wait_queue_head_t queue; - unsigned long address; - int resolved; -} pseudo_wait_t; - -static pseudo_wait_t *pseudo_lock_queue = NULL; -static spinlock_t pseudo_wait_spinlock; /* spinlock to protect lock queue */ - -/* - * This routine handles 'pagex' pseudo page faults. - */ -asmlinkage void -do_pseudo_page_fault(struct pt_regs *regs, unsigned long error_code) -{ - pseudo_wait_t wait_struct; - pseudo_wait_t *ptr, *last, *next; - unsigned long address; - - /* - * get the failing address - * more specific the segment and page table portion of - * the address - */ - address = S390_lowcore.trans_exc_code & 0xfffff000; - - if (address & 0x80000000) { - /* high bit set -> a page has been swapped in by VM */ - address &= 0x7fffffff; - spin_lock(&pseudo_wait_spinlock); - last = NULL; - ptr = pseudo_lock_queue; - while (ptr != NULL) { - next = ptr->next; - if (address == ptr->address) { - /* - * This is one of the processes waiting - * for the page. Unchain from the queue. - * There can be more than one process - * waiting for the same page. VM presents - * an initial and a completion interrupt for - * every process that tries to access a - * page swapped out by VM. - */ - if (last == NULL) - pseudo_lock_queue = next; - else - last->next = next; - /* now wake up the process */ - ptr->resolved = 1; - wake_up(&ptr->queue); - } else - last = ptr; - ptr = next; - } - spin_unlock(&pseudo_wait_spinlock); - } else { - /* Pseudo page faults in kernel mode is a bad idea */ - if (!(regs->psw.mask & PSW_MASK_PSTATE)) { - /* - * VM presents pseudo page faults if the interrupted - * state was not disabled for interrupts. So we can - * get pseudo page fault interrupts while running - * in kernel mode. We simply access the page here - * while we are running disabled. VM will then swap - * in the page synchronously. - */ - if (check_user_space(regs, error_code) == 0) - /* dereference a virtual kernel address */ - __asm__ __volatile__ ( - " ic 0,0(%0)" - : : "a" (address) : "0"); - else - /* dereference a virtual user address */ - __asm__ __volatile__ ( - " la 2,0(%0)\n" - " sacf 512\n" - " ic 2,0(2)\n" - "0:sacf 0\n" - ".section __ex_table,\"a\"\n" - " .align 4\n" - " .long 0b,0b\n" - ".previous" - : : "a" (address) : "2" ); - - return; - } - /* initialize and add element to pseudo_lock_queue */ - init_waitqueue_head (&wait_struct.queue); - wait_struct.address = address; - wait_struct.resolved = 0; - spin_lock(&pseudo_wait_spinlock); - wait_struct.next = pseudo_lock_queue; - pseudo_lock_queue = &wait_struct; - spin_unlock(&pseudo_wait_spinlock); - /* - * The instruction that caused the program check will - * be repeated. Don't signal single step via SIGTRAP. - */ - clear_tsk_thread_flag(current, TIF_SINGLE_STEP); - /* go to sleep */ - wait_event(wait_struct.queue, wait_struct.resolved); - } -} -#endif /* CONFIG_ARCH_S390X */ - #ifdef CONFIG_PFAULT /* * 'pfault' pseudo page faults routines. @@ -508,7 +399,7 @@ int pfault_init(void) " .quad 0b,1b\n" #endif /* CONFIG_ARCH_S390X */ ".previous" - : "=d" (rc) : "a" (&refbk) : "cc" ); + : "=d" (rc) : "a" (&refbk), "m" (refbk) : "cc" ); __ctl_set_bit(0, 9); return rc; } @@ -532,7 +423,7 @@ void pfault_fini(void) " .quad 0b,0b\n" #endif /* CONFIG_ARCH_S390X */ ".previous" - : : "a" (&refbk) : "cc" ); + : : "a" (&refbk), "m" (refbk) : "cc" ); } asmlinkage void diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 3e804c7..64f5ae0 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -490,16 +490,6 @@ config CPU_SUBTYPE_ST40 depends on CPU_SUBTYPE_ST40STB1 || CPU_SUBTYPE_ST40GX1 default y -config ARCH_DISCONTIGMEM_ENABLE - bool - depends on SH_HP690 - default y - help - Say Y to upport efficient handling of discontiguous physical memory, - for architectures which are either NUMA (Non-Uniform Memory Access) - or have huge holes in the physical address space for other reasons. - See <file:Documentation/vm/numa> for more. - source "mm/Kconfig" config ZERO_PAGE_OFFSET @@ -770,24 +760,6 @@ source "fs/Kconfig.binfmt" endmenu -menu "SH initrd options" - depends on BLK_DEV_INITRD - -config EMBEDDED_RAMDISK - bool "Embed root filesystem ramdisk into the kernel" - -config EMBEDDED_RAMDISK_IMAGE - string "Filename of gziped ramdisk image" - depends on EMBEDDED_RAMDISK - default "ramdisk.gz" - help - This is the filename of the ramdisk image to be built into the - kernel. Relative pathnames are relative to arch/sh/ramdisk/. - The ramdisk image is not part of the kernel distribution; you must - provide one yourself. - -endmenu - source "net/Kconfig" source "drivers/Kconfig" diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 4a30490..67192d6 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -60,14 +60,6 @@ LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name) core-y += arch/sh/kernel/ arch/sh/mm/ -# -# ramdisk/initrd support -# You need a compressed ramdisk image, named -# CONFIG_EMBEDDED_RAMDISK_IMAGE. Relative pathnames -# are relative to arch/sh/ramdisk/. -# -core-$(CONFIG_EMBEDDED_RAMDISK) += arch/sh/ramdisk/ - # Boards machdir-$(CONFIG_SH_SOLUTION_ENGINE) := se/770x machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) := se/7751 diff --git a/arch/sh/drivers/Makefile b/arch/sh/drivers/Makefile index bd6726c..338c372 100644 --- a/arch/sh/drivers/Makefile +++ b/arch/sh/drivers/Makefile @@ -2,6 +2,7 @@ # Makefile for the Linux SuperH-specific device drivers. # -obj-$(CONFIG_PCI) += pci/ -obj-$(CONFIG_SH_DMA) += dma/ +obj-$(CONFIG_PCI) += pci/ +obj-$(CONFIG_SH_DMA) += dma/ +obj-$(CONFIG_SUPERHYWAY) += superhyway/ diff --git a/arch/sh/drivers/superhyway/Makefile b/arch/sh/drivers/superhyway/Makefile new file mode 100644 index 0000000..5b8e0c7 --- /dev/null +++ b/arch/sh/drivers/superhyway/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the SuperHyway specific kernel interface routines under Linux. +# + +obj-$(CONFIG_CPU_SUBTYPE_SH4_202) += ops-sh4-202.o + diff --git a/arch/sh/drivers/superhyway/ops-sh4-202.c b/arch/sh/drivers/superhyway/ops-sh4-202.c new file mode 100644 index 0000000..a55c98a --- /dev/null +++ b/arch/sh/drivers/superhyway/ops-sh4-202.c @@ -0,0 +1,171 @@ +/* + * arch/sh/drivers/superhyway/ops-sh4-202.c + * + * SuperHyway bus support for SH4-202 + * + * Copyright (C) 2005 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU + * General Public License. See the file "COPYING" in the main + * directory of this archive for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/superhyway.h> +#include <linux/string.h> +#include <asm/addrspace.h> +#include <asm/io.h> + +#define PHYS_EMI_CBLOCK P4SEGADDR(0x1ec00000) +#define PHYS_EMI_DBLOCK P4SEGADDR(0x08000000) +#define PHYS_FEMI_CBLOCK P4SEGADDR(0x1f800000) +#define PHYS_FEMI_DBLOCK P4SEGADDR(0x00000000) + +#define PHYS_EPBR_BLOCK P4SEGADDR(0x1de00000) +#define PHYS_DMAC_BLOCK P4SEGADDR(0x1fa00000) +#define PHYS_PBR_BLOCK P4SEGADDR(0x1fc00000) + +static struct resource emi_resources[] = { + [0] = { + .start = PHYS_EMI_CBLOCK, + .end = PHYS_EMI_CBLOCK + 0x00300000 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PHYS_EMI_DBLOCK, + .end = PHYS_EMI_DBLOCK + 0x08000000 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct superhyway_device emi_device = { + .name = "emi", + .num_resources = ARRAY_SIZE(emi_resources), + .resource = emi_resources, +}; + +static struct resource femi_resources[] = { + [0] = { + .start = PHYS_FEMI_CBLOCK, + .end = PHYS_FEMI_CBLOCK + 0x00100000 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PHYS_FEMI_DBLOCK, + .end = PHYS_FEMI_DBLOCK + 0x08000000 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct superhyway_device femi_device = { + .name = "femi", + .num_resources = ARRAY_SIZE(femi_resources), + .resource = femi_resources, +}; + +static struct resource epbr_resources[] = { + [0] = { + .start = P4SEGADDR(0x1e7ffff8), + .end = P4SEGADDR(0x1e7ffff8 + (sizeof(u32) * 2) - 1), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PHYS_EPBR_BLOCK, + .end = PHYS_EPBR_BLOCK + 0x00a00000 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct superhyway_device epbr_device = { + .name = "epbr", + .num_resources = ARRAY_SIZE(epbr_resources), + .resource = epbr_resources, +}; + +static struct resource dmac_resource = { + .start = PHYS_DMAC_BLOCK, + .end = PHYS_DMAC_BLOCK + 0x00100000 - 1, + .flags = IORESOURCE_MEM, +}; + +static struct superhyway_device dmac_device = { + .name = "dmac", + .num_resources = 1, + .resource = &dmac_resource, +}; + +static struct resource pbr_resources[] = { + [0] = { + .start = P4SEGADDR(0x1ffffff8), + .end = P4SEGADDR(0x1ffffff8 + (sizeof(u32) * 2) - 1), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PHYS_PBR_BLOCK, + .end = PHYS_PBR_BLOCK + 0x00400000 - (sizeof(u32) * 2) - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct superhyway_device pbr_device = { + .name = "pbr", + .num_resources = ARRAY_SIZE(pbr_resources), + .resource = pbr_resources, +}; + +static struct superhyway_device *sh4202_devices[] __initdata = { + &emi_device, &femi_device, &epbr_device, &dmac_device, &pbr_device, +}; + +static int sh4202_read_vcr(unsigned long base, struct superhyway_vcr_info *vcr) +{ + u32 vcrh, vcrl; + u64 tmp; + + /* + * XXX: Even though the SH4-202 Evaluation Device documentation + * indicates that VCRL is mapped first with VCRH at a + 0x04 + * offset, the opposite seems to be true. + * + * Some modules (PBR and ePBR for instance) also appear to have + * VCRL/VCRH flipped in the documentation, but on the SH4-202 + * itself it appears that these are all consistently mapped with + * VCRH preceeding VCRL. + * + * Do not trust the documentation, for it is evil. + */ + vcrh = ctrl_inl(base); + vcrl = ctrl_inl(base + sizeof(u32)); + + tmp = ((u64)vcrh << 32) | vcrl; + memcpy(vcr, &tmp, sizeof(u64)); + + return 0; +} + +static int sh4202_write_vcr(unsigned long base, struct superhyway_vcr_info vcr) +{ + u64 tmp = *(u64 *)&vcr; + + ctrl_outl((tmp >> 32) & 0xffffffff, base); + ctrl_outl(tmp & 0xffffffff, base + sizeof(u32)); + + return 0; +} + +static struct superhyway_ops sh4202_superhyway_ops = { + .read_vcr = sh4202_read_vcr, + .write_vcr = sh4202_write_vcr, +}; + +struct superhyway_bus superhyway_channels[] = { + { &sh4202_superhyway_ops, }, + { 0, }, +}; + +int __init superhyway_scan_bus(struct superhyway_bus *bus) +{ + return superhyway_add_devices(bus, sh4202_devices, + ARRAY_SIZE(sh4202_devices)); +} + diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index 6dce9d0..fd4f240 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -51,28 +51,24 @@ void enable_hlt(void) EXPORT_SYMBOL(enable_hlt); -void default_idle(void) +void cpu_idle(void) { /* endless idle loop with no priority at all */ while (1) { if (hlt_counter) { - while (1) - if (need_resched()) - break; + while (!need_resched()) + cpu_relax(); } else { while (!need_resched()) cpu_sleep(); } + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } -void cpu_idle(void) -{ - default_idle(); -} - void machine_restart(char * __unused) { /* SR.BL=1 and invoke address error to let CPU reset (manual reset) */ diff --git a/arch/sh/kernel/ptrace.c b/arch/sh/kernel/ptrace.c index 1fbe5a4..1a8be06 100644 --- a/arch/sh/kernel/ptrace.c +++ b/arch/sh/kernel/ptrace.c @@ -80,48 +80,11 @@ void ptrace_disable(struct task_struct *child) /* nothing to do.. */ } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; struct user * dummy = NULL; int ret; - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -289,10 +252,7 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + return ret; } diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 25b9d9e..036050b 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -83,9 +83,9 @@ static struct sh_machine_vector* __init get_mv_byname(const char* name); /* ... */ #define COMMAND_LINE ((char *) (PARAM+0x100)) -#define RAMDISK_IMAGE_START_MASK 0x07FF +#define RAMDISK_IMAGE_START_MASK 0x07FF #define RAMDISK_PROMPT_FLAG 0x8000 -#define RAMDISK_LOAD_FLAG 0x4000 +#define RAMDISK_LOAD_FLAG 0x4000 static char command_line[COMMAND_LINE_SIZE] = { 0, }; @@ -284,18 +284,6 @@ void __init setup_arch(char **cmdline_p) #define PFN_DOWN(x) ((x) >> PAGE_SHIFT) #define PFN_PHYS(x) ((x) << PAGE_SHIFT) -#ifdef CONFIG_DISCONTIGMEM - NODE_DATA(0)->bdata = &discontig_node_bdata[0]; - NODE_DATA(1)->bdata = &discontig_node_bdata[1]; - - bootmap_size = init_bootmem_node(NODE_DATA(1), - PFN_UP(__MEMORY_START_2ND), - PFN_UP(__MEMORY_START_2ND), - PFN_DOWN(__MEMORY_START_2ND+__MEMORY_SIZE_2ND)); - free_bootmem_node(NODE_DATA(1), __MEMORY_START_2ND, __MEMORY_SIZE_2ND); - reserve_bootmem_node(NODE_DATA(1), __MEMORY_START_2ND, bootmap_size); -#endif - /* * Find the highest page frame number we have available */ @@ -306,10 +294,10 @@ void __init setup_arch(char **cmdline_p) */ max_low_pfn = max_pfn; - /* + /* * Partially used pages are not usable - thus * we are rounding upwards: - */ + */ start_pfn = PFN_UP(__pa(_end)); /* @@ -360,12 +348,12 @@ void __init setup_arch(char **cmdline_p) reserve_bootmem_node(NODE_DATA(0), __MEMORY_START, PAGE_SIZE); #ifdef CONFIG_BLK_DEV_INITRD - ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0); - if (&__rd_start != &__rd_end) { + ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0); + if (&__rd_start != &__rd_end) { LOADER_TYPE = 1; INITRD_START = PHYSADDR((unsigned long)&__rd_start) - __MEMORY_START; INITRD_SIZE = (unsigned long)&__rd_end - (unsigned long)&__rd_start; - } + } if (LOADER_TYPE && INITRD_START) { if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) { diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c index 5ecefc0..59e49b1 100644 --- a/arch/sh/kernel/smp.c +++ b/arch/sh/kernel/smp.c @@ -112,7 +112,9 @@ int __cpu_up(unsigned int cpu) int start_secondary(void *unused) { - unsigned int cpu = smp_processor_id(); + unsigned int cpu; + + cpu = smp_processor_id(); atomic_inc(&init_mm.mm_count); current->active_mm = &init_mm; @@ -120,6 +122,7 @@ int start_secondary(void *unused) smp_store_cpu_info(cpu); __smp_slave_init(cpu); + preempt_disable(); per_cpu_trap_init(); atomic_inc(&cpus_booted); diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index 4e9c854..e342565f 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -51,11 +51,6 @@ unsigned long mmu_context_cache = NO_CONTEXT; #define MAX_LOW_PFN (NODE_DATA(0)->bdata->node_low_pfn) #endif -#ifdef CONFIG_DISCONTIGMEM -pg_data_t discontig_page_data[MAX_NUMNODES]; -bootmem_data_t discontig_node_bdata[MAX_NUMNODES]; -#endif - void (*copy_page)(void *from, void *to); void (*clear_page)(void *to); @@ -216,15 +211,6 @@ void __init paging_init(void) #endif NODE_DATA(0)->node_mem_map = NULL; free_area_init_node(0, NODE_DATA(0), zones_size, __MEMORY_START >> PAGE_SHIFT, 0); - -#ifdef CONFIG_DISCONTIGMEM - /* - * And for discontig, do some more fixups on the zone sizes.. - */ - zones_size[ZONE_DMA] = __MEMORY_SIZE_2ND >> PAGE_SHIFT; - zones_size[ZONE_NORMAL] = 0; - free_area_init_node(1, NODE_DATA(1), zones_size, __MEMORY_START_2ND >> PAGE_SHIFT, 0); -#endif } void __init mem_init(void) @@ -248,7 +234,7 @@ void __init mem_init(void) memset(empty_zero_page, 0, PAGE_SIZE); __flush_wback_region(empty_zero_page, PAGE_SIZE); - /* + /* * Setup wrappers for copy/clear_page(), these will get overridden * later in the boot process if a better method is available. */ @@ -257,9 +243,6 @@ void __init mem_init(void) /* this will put all low memory onto the freelists */ totalram_pages += free_all_bootmem_node(NODE_DATA(0)); -#ifdef CONFIG_DISCONTIGMEM - totalram_pages += free_all_bootmem_node(NODE_DATA(1)); -#endif reservedpages = 0; for (tmp = 0; tmp < num_physpages; tmp++) /* @@ -286,7 +269,7 @@ void __init mem_init(void) void free_initmem(void) { unsigned long addr; - + addr = (unsigned long)(&__init_begin); for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c index 7a0d5c1..46b09e2 100644 --- a/arch/sh/mm/tlb-sh3.c +++ b/arch/sh/mm/tlb-sh3.c @@ -40,12 +40,17 @@ void update_mmu_cache(struct vm_area_struct * vma, return; #if defined(CONFIG_SH7705_CACHE_32KB) - struct page *page; - page = pte_page(pte); - if (VALID_PAGE(page) && !test_bit(PG_mapped, &page->flags)) { - unsigned long phys = pte_val(pte) & PTE_PHYS_MASK; - __flush_wback_region((void *)P1SEGADDR(phys), PAGE_SIZE); - __set_bit(PG_mapped, &page->flags); + { + struct page *page = pte_page(pte); + unsigned long pfn = pte_pfn(pte); + + if (pfn_valid(pfn) && !test_bit(PG_mapped, &page->flags)) { + unsigned long phys = pte_val(pte) & PTE_PHYS_MASK; + + __flush_wback_region((void *)P1SEGADDR(phys), + PAGE_SIZE); + __set_bit(PG_mapped, &page->flags); + } } #endif @@ -80,7 +85,7 @@ void __flush_tlb_page(unsigned long asid, unsigned long page) */ addr = MMU_TLB_ADDRESS_ARRAY | (page & 0x1F000); data = (page & 0xfffe0000) | asid; /* VALID bit is off */ - + if ((cpu_data->flags & CPU_HAS_MMU_PAGE_ASSOC)) { addr |= MMU_PAGE_ASSOC_BIT; ways = 1; /* we already know the way .. */ diff --git a/arch/sh/ramdisk/Makefile b/arch/sh/ramdisk/Makefile deleted file mode 100644 index 99e1c68..0000000 --- a/arch/sh/ramdisk/Makefile +++ /dev/null @@ -1,20 +0,0 @@ -# -# Makefile for a ramdisk image -# - -obj-y += ramdisk.o - - -O_FORMAT = $(shell $(OBJDUMP) -i | head -n 2 | grep elf32) -img := $(subst ",,$(CONFIG_EMBEDDED_RAMDISK_IMAGE)) -# add $(src) when $(img) is relative -img := $(subst $(src)//,/,$(src)/$(img)) - -quiet_cmd_ramdisk = LD $@ -define cmd_ramdisk - $(LD) -T $(srctree)/$(src)/ld.script -b binary --oformat $(O_FORMAT) \ - -o $@ $(img) -endef - -$(obj)/ramdisk.o: $(img) $(srctree)/$(src)/ld.script - $(call cmd,ramdisk) diff --git a/arch/sh/ramdisk/ld.script b/arch/sh/ramdisk/ld.script deleted file mode 100644 index 94beee2..0000000 --- a/arch/sh/ramdisk/ld.script +++ /dev/null @@ -1,9 +0,0 @@ -OUTPUT_ARCH(sh) -SECTIONS -{ - .initrd : - { - *(.data) - } -} - diff --git a/arch/sh64/kernel/process.c b/arch/sh64/kernel/process.c index efde41c..b95d041 100644 --- a/arch/sh64/kernel/process.c +++ b/arch/sh64/kernel/process.c @@ -307,23 +307,19 @@ __setup("hlt", hlt_setup); static inline void hlt(void) { - if (hlt_counter) - return; - __asm__ __volatile__ ("sleep" : : : "memory"); } /* * The idle loop on a uniprocessor SH.. */ -void default_idle(void) +void cpu_idle(void) { /* endless idle loop with no priority at all */ while (1) { if (hlt_counter) { - while (1) - if (need_resched()) - break; + while (!need_resched()) + cpu_relax(); } else { local_irq_disable(); while (!need_resched()) { @@ -334,13 +330,11 @@ void default_idle(void) } local_irq_enable(); } + preempt_enable_no_resched(); schedule(); + preempt_disable(); } -} -void cpu_idle(void) -{ - default_idle(); } void machine_restart(char * __unused) diff --git a/arch/sh64/kernel/ptrace.c b/arch/sh64/kernel/ptrace.c index 71f2eec..cd22e94 100644 --- a/arch/sh64/kernel/ptrace.c +++ b/arch/sh64/kernel/ptrace.c @@ -28,6 +28,7 @@ #include <linux/ptrace.h> #include <linux/user.h> #include <linux/signal.h> +#include <linux/syscalls.h> #include <asm/io.h> #include <asm/uaccess.h> @@ -121,61 +122,11 @@ put_fpu_long(struct task_struct *task, unsigned long addr, unsigned long data) return 0; } -asmlinkage long sys_ptrace(long request, long pid, long addr, long data) + +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; - extern void poke_real_address_q(unsigned long long addr, unsigned long long data); -#define WPC_DBRMODE 0x0d104008 - static int first_call = 1; int ret; - lock_kernel(); - - if (first_call) { - /* Set WPC.DBRMODE to 0. This makes all debug events get - * delivered through RESVEC, i.e. into the handlers in entry.S. - * (If the kernel was downloaded using a remote gdb, WPC.DBRMODE - * would normally be left set to 1, which makes debug events get - * delivered through DBRVEC, i.e. into the remote gdb's - * handlers. This prevents ptrace getting them, and confuses - * the remote gdb.) */ - printk("DBRMODE set to 0 to permit native debugging\n"); - poke_real_address_q(WPC_DBRMODE, 0); - first_call = 0; - } - - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -313,13 +264,33 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); return ret; } +asmlinkage int sh64_ptrace(long request, long pid, long addr, long data) +{ + extern void poke_real_address_q(unsigned long long addr, unsigned long long data); +#define WPC_DBRMODE 0x0d104008 + static int first_call = 1; + + lock_kernel(); + if (first_call) { + /* Set WPC.DBRMODE to 0. This makes all debug events get + * delivered through RESVEC, i.e. into the handlers in entry.S. + * (If the kernel was downloaded using a remote gdb, WPC.DBRMODE + * would normally be left set to 1, which makes debug events get + * delivered through DBRVEC, i.e. into the remote gdb's + * handlers. This prevents ptrace getting them, and confuses + * the remote gdb.) */ + printk("DBRMODE set to 0 to permit native debugging\n"); + poke_real_address_q(WPC_DBRMODE, 0); + first_call = 0; + } + unlock_kernel(); + + return sys_ptrace(request, pid, addr, data); +} + asmlinkage void syscall_trace(void) { struct task_struct *tsk = current; diff --git a/arch/sh64/kernel/syscalls.S b/arch/sh64/kernel/syscalls.S index a3d0378..c0079d5 100644 --- a/arch/sh64/kernel/syscalls.S +++ b/arch/sh64/kernel/syscalls.S @@ -46,7 +46,7 @@ sys_call_table: .long sys_setuid16 .long sys_getuid16 .long sys_stime /* 25 */ - .long sys_ptrace + .long sh64_ptrace .long sys_alarm .long sys_fstat .long sys_pause diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 6537445..3cfb8be 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -201,6 +201,14 @@ config SUN_OPENPROMFS Only choose N if you know in advance that you will not need to modify OpenPROM settings on the running system. +config SPARC_LED + tristate "Sun4m LED driver" + help + This driver toggles the front-panel LED on sun4m systems + in a user-specifyable manner. It's state can be probed + by reading /proc/led and it's blinking mode can be changed + via writes to /proc/led + source "fs/Kconfig.binfmt" config SUNOS_EMUL diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile index 3d22ba2..1b83e21 100644 --- a/arch/sparc/kernel/Makefile +++ b/arch/sparc/kernel/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_SUN_AUXIO) += auxio.o obj-$(CONFIG_PCI) += ebus.o obj-$(CONFIG_SUN_PM) += apc.o pmc.o obj-$(CONFIG_MODULES) += module.o sparc_ksyms.o +obj-$(CONFIG_SPARC_LED) += led.o ifdef CONFIG_SUNOS_EMUL obj-y += sys_sunos.o sunos_ioctl.o diff --git a/arch/sparc/kernel/cpu.c b/arch/sparc/kernel/cpu.c index 6a4ebc6..d7bfc61 100644 --- a/arch/sparc/kernel/cpu.c +++ b/arch/sparc/kernel/cpu.c @@ -75,7 +75,7 @@ struct cpu_fp_info linux_sparc_fpu[] = { { 9, 3, "Fujitsu or Weitek on-chip FPU"}, }; -#define NSPARCFPU (sizeof(linux_sparc_fpu)/sizeof(struct cpu_fp_info)) +#define NSPARCFPU ARRAY_SIZE(linux_sparc_fpu) struct cpu_iu_info linux_sparc_chips[] = { /* Sun4/100, 4/200, SLC */ @@ -120,7 +120,7 @@ struct cpu_iu_info linux_sparc_chips[] = { { 0xf, 0, "UNKNOWN CPU-VENDOR/TYPE"}, }; -#define NSPARCCHIPS (sizeof(linux_sparc_chips)/sizeof(struct cpu_iu_info)) +#define NSPARCCHIPS ARRAY_SIZE(linux_sparc_chips) char *sparc_cpu_type; char *sparc_fpu_type; diff --git a/arch/sparc/kernel/led.c b/arch/sparc/kernel/led.c new file mode 100644 index 0000000..2a3afca --- /dev/null +++ b/arch/sparc/kernel/led.c @@ -0,0 +1,139 @@ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/proc_fs.h> +#include <linux/string.h> + +#include <asm/auxio.h> + +#define LED_MAX_LENGTH 8 /* maximum chars written to proc file */ + +static inline void led_toggle(void) +{ + unsigned char val = get_auxio(); + unsigned char on, off; + + if (val & AUXIO_LED) { + on = 0; + off = AUXIO_LED; + } else { + on = AUXIO_LED; + off = 0; + } + + set_auxio(on, off); +} + +static struct timer_list led_blink_timer; + +static void led_blink(unsigned long timeout) +{ + led_toggle(); + + /* reschedule */ + if (!timeout) { /* blink according to load */ + led_blink_timer.expires = jiffies + + ((1 + (avenrun[0] >> FSHIFT)) * HZ); + led_blink_timer.data = 0; + } else { /* blink at user specified interval */ + led_blink_timer.expires = jiffies + (timeout * HZ); + led_blink_timer.data = timeout; + } + add_timer(&led_blink_timer); +} + +static int led_read_proc(char *buf, char **start, off_t offset, int count, + int *eof, void *data) +{ + int len = 0; + + if (get_auxio() & AUXIO_LED) + len = sprintf(buf, "on\n"); + else + len = sprintf(buf, "off\n"); + + return len; +} + +static int led_write_proc(struct file *file, const char *buffer, + unsigned long count, void *data) +{ + char *buf = NULL; + + if (count > LED_MAX_LENGTH) + count = LED_MAX_LENGTH; + + buf = kmalloc(sizeof(char) * (count + 1), GFP_KERNEL); + if (!buf) + return -ENOMEM; + + if (copy_from_user(buf, buffer, count)) { + kfree(buf); + return -EFAULT; + } + + buf[count] = '\0'; + + /* work around \n when echo'ing into proc */ + if (buf[count - 1] == '\n') + buf[count - 1] = '\0'; + + /* before we change anything we want to stop any running timers, + * otherwise calls such as on will have no persistent effect + */ + del_timer_sync(&led_blink_timer); + + if (!strcmp(buf, "on")) { + auxio_set_led(AUXIO_LED_ON); + } else if (!strcmp(buf, "toggle")) { + led_toggle(); + } else if ((*buf > '0') && (*buf <= '9')) { + led_blink(simple_strtoul(buf, NULL, 10)); + } else if (!strcmp(buf, "load")) { + led_blink(0); + } else { + auxio_set_led(AUXIO_LED_OFF); + } + + kfree(buf); + + return count; +} + +static struct proc_dir_entry *led; + +#define LED_VERSION "0.1" + +static int __init led_init(void) +{ + init_timer(&led_blink_timer); + led_blink_timer.function = led_blink; + + led = create_proc_entry("led", 0, NULL); + if (!led) + return -ENOMEM; + + led->read_proc = led_read_proc; /* reader function */ + led->write_proc = led_write_proc; /* writer function */ + led->owner = THIS_MODULE; + + printk(KERN_INFO + "led: version %s, Lars Kotthoff <metalhead@metalhead.ws>\n", + LED_VERSION); + + return 0; +} + +static void __exit led_exit(void) +{ + remove_proc_entry("led", NULL); + del_timer_sync(&led_blink_timer); +} + +module_init(led_init); +module_exit(led_exit); + +MODULE_AUTHOR("Lars Kotthoff <metalhead@metalhead.ws>"); +MODULE_DESCRIPTION("Provides control of the front LED on SPARC systems."); +MODULE_LICENSE("GPL"); +MODULE_VERSION(LED_VERSION); diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c index 25e31d5..cccfc12 100644 --- a/arch/sparc/kernel/pcic.c +++ b/arch/sparc/kernel/pcic.c @@ -143,7 +143,7 @@ static struct pcic_ca2irq pcic_i_jk[] = { * as several PROMs may be installed on the same physical board. */ #define SN2L_INIT(name, map) \ - { name, map, sizeof(map)/sizeof(struct pcic_ca2irq) } + { name, map, ARRAY_SIZE(map) } static struct pcic_sn2list pcic_known_sysnames[] = { SN2L_INIT("SUNW,JavaEngine1", pcic_i_je1a), /* JE1, PROM 2.32 */ diff --git a/arch/sparc/kernel/process.c b/arch/sparc/kernel/process.c index 29e72b5..ea86474 100644 --- a/arch/sparc/kernel/process.c +++ b/arch/sparc/kernel/process.c @@ -67,13 +67,6 @@ extern void fpsave(unsigned long *, unsigned long *, void *, unsigned long *); struct task_struct *last_task_used_math = NULL; struct thread_info *current_set[NR_CPUS]; -/* - * default_idle is new in 2.5. XXX Review, currently stolen from sparc64. - */ -void default_idle(void) -{ -} - #ifndef CONFIG_SMP #define SUN4C_FAULT_HIGH 100 @@ -92,12 +85,11 @@ void cpu_idle(void) static unsigned long fps; unsigned long now; unsigned long faults; - unsigned long flags; extern unsigned long sun4c_kernel_faults; extern void sun4c_grow_kernel_ring(void); - local_irq_save(flags); + local_irq_disable(); now = jiffies; count -= (now - last_jiffies); last_jiffies = now; @@ -113,14 +105,19 @@ void cpu_idle(void) sun4c_grow_kernel_ring(); } } - local_irq_restore(flags); + local_irq_enable(); } - while((!need_resched()) && pm_idle) { - (*pm_idle)(); + if (pm_idle) { + while (!need_resched()) + (*pm_idle)(); + } else { + while (!need_resched()) + cpu_relax(); } - + preempt_enable_no_resched(); schedule(); + preempt_disable(); check_pgt_cache(); } } @@ -130,13 +127,15 @@ void cpu_idle(void) /* This is being executed in task 0 'user space'. */ void cpu_idle(void) { + set_thread_flag(TIF_POLLING_NRFLAG); /* endless idle loop with no priority at all */ while(1) { - if(need_resched()) { - schedule(); - check_pgt_cache(); - } - barrier(); /* or else gcc optimizes... */ + while (!need_resched()) + cpu_relax(); + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + check_pgt_cache(); } } diff --git a/arch/sparc/kernel/sunos_ioctl.c b/arch/sparc/kernel/sunos_ioctl.c index df1c0b3..a6ba3d2 100644 --- a/arch/sparc/kernel/sunos_ioctl.c +++ b/arch/sparc/kernel/sunos_ioctl.c @@ -23,7 +23,6 @@ #include <linux/smp_lock.h> #include <linux/syscalls.h> #include <linux/file.h> -#include <asm/kbio.h> #if 0 extern char sunkbd_type; diff --git a/arch/sparc/mm/fault.c b/arch/sparc/mm/fault.c index 2bbd53f..9eeed33 100644 --- a/arch/sparc/mm/fault.c +++ b/arch/sparc/mm/fault.c @@ -33,8 +33,6 @@ #include <asm/kdebug.h> #include <asm/uaccess.h> -#define ELEMENTS(arr) (sizeof (arr)/sizeof (arr[0])) - extern int prom_node_root; /* At boot time we determine these two values necessary for setting diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index 1e9d863..3fded69 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -377,8 +377,21 @@ source "drivers/fc4/Kconfig" source "fs/Kconfig" +menu "Instrumentation Support" + depends on EXPERIMENTAL + source "arch/sparc64/oprofile/Kconfig" +config KPROBES + bool "Kprobes (EXPERIMENTAL)" + help + Kprobes allows you to trap at almost any kernel address and + execute a callback function. register_kprobe() establishes + a probepoint and specifies the callback. Kprobes is useful + for kernel debugging, non-intrusive instrumentation and testing. + If in doubt, say "N". +endmenu + source "arch/sparc64/Kconfig.debug" source "security/Kconfig" diff --git a/arch/sparc64/Kconfig.debug b/arch/sparc64/Kconfig.debug index fa06ea0..3e31be4 100644 --- a/arch/sparc64/Kconfig.debug +++ b/arch/sparc64/Kconfig.debug @@ -11,16 +11,6 @@ config DEBUG_STACK_USAGE This option will slow down process creation somewhat. -config KPROBES - bool "Kprobes" - depends on DEBUG_KERNEL - help - Kprobes allows you to trap at almost any kernel address and - execute a callback function. register_kprobe() establishes - a probepoint and specifies the callback. Kprobes is useful - for kernel debugging, non-intrusive instrumentation and testing. - If in doubt, say "N". - config DEBUG_DCFLUSH bool "D-cache flush debugging" depends on DEBUG_KERNEL diff --git a/arch/sparc64/kernel/cpu.c b/arch/sparc64/kernel/cpu.c index 77ef5df..00eed88 100644 --- a/arch/sparc64/kernel/cpu.c +++ b/arch/sparc64/kernel/cpu.c @@ -43,7 +43,7 @@ struct cpu_fp_info linux_sparc_fpu[] = { { 0x3e, 0x22, 0, "UltraSparc IIIi+ integrated FPU"}, }; -#define NSPARCFPU (sizeof(linux_sparc_fpu)/sizeof(struct cpu_fp_info)) +#define NSPARCFPU ARRAY_SIZE(linux_sparc_fpu) struct cpu_iu_info linux_sparc_chips[] = { { 0x17, 0x10, "TI UltraSparc I (SpitFire)"}, @@ -59,7 +59,7 @@ struct cpu_iu_info linux_sparc_chips[] = { { 0x3e, 0x22, "TI UltraSparc IIIi+ (Serrano)"}, }; -#define NSPARCCHIPS (sizeof(linux_sparc_chips)/sizeof(struct cpu_iu_info)) +#define NSPARCCHIPS ARRAY_SIZE(linux_sparc_chips) char *sparc_cpu_type = "cpu-oops"; char *sparc_fpu_type = "fpu-oops"; diff --git a/arch/sparc64/kernel/ioctl32.c b/arch/sparc64/kernel/ioctl32.c index e6a0032..e622143 100644 --- a/arch/sparc64/kernel/ioctl32.c +++ b/arch/sparc64/kernel/ioctl32.c @@ -11,33 +11,14 @@ #define INCLUDES #include "compat_ioctl.c" -#include <linux/ncp_fs.h> #include <linux/syscalls.h> #include <asm/fbio.h> -#include <asm/kbio.h> -#include <asm/vuid_event.h> -#include <asm/envctrl.h> -#include <asm/display7seg.h> -#include <asm/openpromio.h> -#include <asm/audioio.h> -#include <asm/watchdog.h> /* Use this to get at 32-bit user passed pointers. * See sys_sparc32.c for description about it. */ #define A(__x) compat_ptr(__x) -static __inline__ void *alloc_user_space(long len) -{ - struct pt_regs *regs = current_thread_info()->kregs; - unsigned long usp = regs->u_regs[UREG_I6]; - - if (!(test_thread_flag(TIF_32BIT))) - usp += STACK_BIAS; - - return (void *) (usp - len); -} - #define CODE #include "compat_ioctl.c" @@ -111,361 +92,8 @@ static int fbiogscursor(unsigned int fd, unsigned int cmd, unsigned long arg) return sys_ioctl (fd, FBIOSCURSOR, (unsigned long)p); } -#if defined(CONFIG_DRM) || defined(CONFIG_DRM_MODULE) -/* This really belongs in include/linux/drm.h -DaveM */ -#include "../../../drivers/char/drm/drm.h" - -typedef struct drm32_version { - int version_major; /* Major version */ - int version_minor; /* Minor version */ - int version_patchlevel;/* Patch level */ - int name_len; /* Length of name buffer */ - u32 name; /* Name of driver */ - int date_len; /* Length of date buffer */ - u32 date; /* User-space buffer to hold date */ - int desc_len; /* Length of desc buffer */ - u32 desc; /* User-space buffer to hold desc */ -} drm32_version_t; -#define DRM32_IOCTL_VERSION DRM_IOWR(0x00, drm32_version_t) - -static int drm32_version(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_version_t __user *uversion = (drm32_version_t __user *)arg; - drm_version_t __user *p = compat_alloc_user_space(sizeof(*p)); - compat_uptr_t addr; - int n; - int ret; - - if (clear_user(p, 3 * sizeof(int)) || - get_user(n, &uversion->name_len) || - put_user(n, &p->name_len) || - get_user(addr, &uversion->name) || - put_user(compat_ptr(addr), &p->name) || - get_user(n, &uversion->date_len) || - put_user(n, &p->date_len) || - get_user(addr, &uversion->date) || - put_user(compat_ptr(addr), &p->date) || - get_user(n, &uversion->desc_len) || - put_user(n, &p->desc_len) || - get_user(addr, &uversion->desc) || - put_user(compat_ptr(addr), &p->desc)) - return -EFAULT; - - ret = sys_ioctl(fd, DRM_IOCTL_VERSION, (unsigned long)p); - if (ret) - return ret; - - if (copy_in_user(uversion, p, 3 * sizeof(int)) || - get_user(n, &p->name_len) || - put_user(n, &uversion->name_len) || - get_user(n, &p->date_len) || - put_user(n, &uversion->date_len) || - get_user(n, &p->desc_len) || - put_user(n, &uversion->desc_len)) - return -EFAULT; - - return 0; -} - -typedef struct drm32_unique { - int unique_len; /* Length of unique */ - u32 unique; /* Unique name for driver instantiation */ -} drm32_unique_t; -#define DRM32_IOCTL_GET_UNIQUE DRM_IOWR(0x01, drm32_unique_t) -#define DRM32_IOCTL_SET_UNIQUE DRM_IOW( 0x10, drm32_unique_t) - -static int drm32_getsetunique(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_unique_t __user *uarg = (drm32_unique_t __user *)arg; - drm_unique_t __user *p = compat_alloc_user_space(sizeof(*p)); - compat_uptr_t addr; - int n; - int ret; - - if (get_user(n, &uarg->unique_len) || - put_user(n, &p->unique_len) || - get_user(addr, &uarg->unique) || - put_user(compat_ptr(addr), &p->unique)) - return -EFAULT; - - if (cmd == DRM32_IOCTL_GET_UNIQUE) - ret = sys_ioctl (fd, DRM_IOCTL_GET_UNIQUE, (unsigned long)p); - else - ret = sys_ioctl (fd, DRM_IOCTL_SET_UNIQUE, (unsigned long)p); - - if (ret) - return ret; - - if (get_user(n, &p->unique_len) || put_user(n, &uarg->unique_len)) - return -EFAULT; - - return 0; -} - -typedef struct drm32_map { - u32 offset; /* Requested physical address (0 for SAREA)*/ - u32 size; /* Requested physical size (bytes) */ - drm_map_type_t type; /* Type of memory to map */ - drm_map_flags_t flags; /* Flags */ - u32 handle; /* User-space: "Handle" to pass to mmap */ - /* Kernel-space: kernel-virtual address */ - int mtrr; /* MTRR slot used */ - /* Private data */ -} drm32_map_t; -#define DRM32_IOCTL_ADD_MAP DRM_IOWR(0x15, drm32_map_t) - -static int drm32_addmap(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_map_t __user *uarg = (drm32_map_t __user *) arg; - drm_map_t karg; - mm_segment_t old_fs; - u32 tmp; - int ret; - - ret = get_user(karg.offset, &uarg->offset); - ret |= get_user(karg.size, &uarg->size); - ret |= get_user(karg.type, &uarg->type); - ret |= get_user(karg.flags, &uarg->flags); - ret |= get_user(tmp, &uarg->handle); - ret |= get_user(karg.mtrr, &uarg->mtrr); - if (ret) - return -EFAULT; - - karg.handle = (void *) (unsigned long) tmp; - - old_fs = get_fs(); - set_fs(KERNEL_DS); - ret = sys_ioctl(fd, DRM_IOCTL_ADD_MAP, (unsigned long) &karg); - set_fs(old_fs); - - if (!ret) { - ret = put_user(karg.offset, &uarg->offset); - ret |= put_user(karg.size, &uarg->size); - ret |= put_user(karg.type, &uarg->type); - ret |= put_user(karg.flags, &uarg->flags); - tmp = (u32) (long)karg.handle; - ret |= put_user(tmp, &uarg->handle); - ret |= put_user(karg.mtrr, &uarg->mtrr); - if (ret) - ret = -EFAULT; - } - - return ret; -} - -typedef struct drm32_buf_info { - int count; /* Entries in list */ - u32 list; /* (drm_buf_desc_t *) */ -} drm32_buf_info_t; -#define DRM32_IOCTL_INFO_BUFS DRM_IOWR(0x18, drm32_buf_info_t) - -static int drm32_info_bufs(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_buf_info_t __user *uarg = (drm32_buf_info_t __user *)arg; - drm_buf_info_t __user *p = compat_alloc_user_space(sizeof(*p)); - compat_uptr_t addr; - int n; - int ret; - - if (get_user(n, &uarg->count) || put_user(n, &p->count) || - get_user(addr, &uarg->list) || put_user(compat_ptr(addr), &p->list)) - return -EFAULT; - - ret = sys_ioctl(fd, DRM_IOCTL_INFO_BUFS, (unsigned long)p); - if (ret) - return ret; - - if (get_user(n, &p->count) || put_user(n, &uarg->count)) - return -EFAULT; - - return 0; -} - -typedef struct drm32_buf_free { - int count; - u32 list; /* (int *) */ -} drm32_buf_free_t; -#define DRM32_IOCTL_FREE_BUFS DRM_IOW( 0x1a, drm32_buf_free_t) - -static int drm32_free_bufs(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_buf_free_t __user *uarg = (drm32_buf_free_t __user *)arg; - drm_buf_free_t __user *p = compat_alloc_user_space(sizeof(*p)); - compat_uptr_t addr; - int n; - - if (get_user(n, &uarg->count) || put_user(n, &p->count) || - get_user(addr, &uarg->list) || put_user(compat_ptr(addr), &p->list)) - return -EFAULT; - - return sys_ioctl(fd, DRM_IOCTL_FREE_BUFS, (unsigned long)p); -} - -typedef struct drm32_buf_pub { - int idx; /* Index into master buflist */ - int total; /* Buffer size */ - int used; /* Amount of buffer in use (for DMA) */ - u32 address; /* Address of buffer (void *) */ -} drm32_buf_pub_t; - -typedef struct drm32_buf_map { - int count; /* Length of buflist */ - u32 virtual; /* Mmaped area in user-virtual (void *) */ - u32 list; /* Buffer information (drm_buf_pub_t *) */ -} drm32_buf_map_t; -#define DRM32_IOCTL_MAP_BUFS DRM_IOWR(0x19, drm32_buf_map_t) - -static int drm32_map_bufs(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_buf_map_t __user *uarg = (drm32_buf_map_t __user *)arg; - drm32_buf_pub_t __user *ulist; - drm_buf_map_t __user *arg64; - drm_buf_pub_t __user *list; - int orig_count, ret, i; - int n; - compat_uptr_t addr; - - if (get_user(orig_count, &uarg->count)) - return -EFAULT; - - arg64 = compat_alloc_user_space(sizeof(drm_buf_map_t) + - (size_t)orig_count * sizeof(drm_buf_pub_t)); - list = (void __user *)(arg64 + 1); - - if (put_user(orig_count, &arg64->count) || - put_user(list, &arg64->list) || - get_user(addr, &uarg->virtual) || - put_user(compat_ptr(addr), &arg64->virtual) || - get_user(addr, &uarg->list)) - return -EFAULT; - - ulist = compat_ptr(addr); - - for (i = 0; i < orig_count; i++) { - if (get_user(n, &ulist[i].idx) || - put_user(n, &list[i].idx) || - get_user(n, &ulist[i].total) || - put_user(n, &list[i].total) || - get_user(n, &ulist[i].used) || - put_user(n, &list[i].used) || - get_user(addr, &ulist[i].address) || - put_user(compat_ptr(addr), &list[i].address)) - return -EFAULT; - } - - ret = sys_ioctl(fd, DRM_IOCTL_MAP_BUFS, (unsigned long) arg64); - if (ret) - return ret; - - for (i = 0; i < orig_count; i++) { - void __user *p; - if (get_user(n, &list[i].idx) || - put_user(n, &ulist[i].idx) || - get_user(n, &list[i].total) || - put_user(n, &ulist[i].total) || - get_user(n, &list[i].used) || - put_user(n, &ulist[i].used) || - get_user(p, &list[i].address) || - put_user((unsigned long)p, &ulist[i].address)) - return -EFAULT; - } - - if (get_user(n, &arg64->count) || put_user(n, &uarg->count)) - return -EFAULT; - - return 0; -} - -typedef struct drm32_dma { - /* Indices here refer to the offset into - buflist in drm_buf_get_t. */ - int context; /* Context handle */ - int send_count; /* Number of buffers to send */ - u32 send_indices; /* List of handles to buffers (int *) */ - u32 send_sizes; /* Lengths of data to send (int *) */ - drm_dma_flags_t flags; /* Flags */ - int request_count; /* Number of buffers requested */ - int request_size; /* Desired size for buffers */ - u32 request_indices; /* Buffer information (int *) */ - u32 request_sizes; /* (int *) */ - int granted_count; /* Number of buffers granted */ -} drm32_dma_t; -#define DRM32_IOCTL_DMA DRM_IOWR(0x29, drm32_dma_t) - -/* RED PEN The DRM layer blindly dereferences the send/request - * index/size arrays even though they are userland - * pointers. -DaveM - */ -static int drm32_dma(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_dma_t __user *uarg = (drm32_dma_t __user *) arg; - drm_dma_t __user *p = compat_alloc_user_space(sizeof(*p)); - compat_uptr_t addr; - int ret; - - if (copy_in_user(p, uarg, 2 * sizeof(int)) || - get_user(addr, &uarg->send_indices) || - put_user(compat_ptr(addr), &p->send_indices) || - get_user(addr, &uarg->send_sizes) || - put_user(compat_ptr(addr), &p->send_sizes) || - copy_in_user(&p->flags, &uarg->flags, sizeof(drm_dma_flags_t)) || - copy_in_user(&p->request_count, &uarg->request_count, sizeof(int))|| - copy_in_user(&p->request_size, &uarg->request_size, sizeof(int)) || - get_user(addr, &uarg->request_indices) || - put_user(compat_ptr(addr), &p->request_indices) || - get_user(addr, &uarg->request_sizes) || - put_user(compat_ptr(addr), &p->request_sizes) || - copy_in_user(&p->granted_count, &uarg->granted_count, sizeof(int))) - return -EFAULT; - - ret = sys_ioctl(fd, DRM_IOCTL_DMA, (unsigned long)p); - if (ret) - return ret; - - if (copy_in_user(uarg, p, 2 * sizeof(int)) || - copy_in_user(&uarg->flags, &p->flags, sizeof(drm_dma_flags_t)) || - copy_in_user(&uarg->request_count, &p->request_count, sizeof(int))|| - copy_in_user(&uarg->request_size, &p->request_size, sizeof(int)) || - copy_in_user(&uarg->granted_count, &p->granted_count, sizeof(int))) - return -EFAULT; - - return 0; -} - -typedef struct drm32_ctx_res { - int count; - u32 contexts; /* (drm_ctx_t *) */ -} drm32_ctx_res_t; -#define DRM32_IOCTL_RES_CTX DRM_IOWR(0x26, drm32_ctx_res_t) - -static int drm32_res_ctx(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_ctx_res_t __user *uarg = (drm32_ctx_res_t __user *) arg; - drm_ctx_res_t __user *p = compat_alloc_user_space(sizeof(*p)); - compat_uptr_t addr; - int ret; - - if (copy_in_user(p, uarg, sizeof(int)) || - get_user(addr, &uarg->contexts) || - put_user(compat_ptr(addr), &p->contexts)) - return -EFAULT; - - ret = sys_ioctl(fd, DRM_IOCTL_RES_CTX, (unsigned long)p); - if (ret) - return ret; - - if (copy_in_user(uarg, p, sizeof(int))) - return -EFAULT; - - return 0; -} - -#endif - -typedef int (* ioctl32_handler_t)(unsigned int, unsigned int, unsigned long, struct file *); - #define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL((cmd),sys_ioctl) -#define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl32_handler_t)(handler), NULL }, +#define HANDLE_IOCTL(cmd,handler) { (cmd), (ioctl_trans_handler_t)(handler), NULL }, #define IOCTL_TABLE_START \ struct ioctl_trans ioctl_start[] = { #define IOCTL_TABLE_END \ @@ -485,103 +113,12 @@ COMPATIBLE_IOCTL(FBIOSCURPOS) COMPATIBLE_IOCTL(FBIOGCURPOS) COMPATIBLE_IOCTL(FBIOGCURMAX) /* Little k */ -COMPATIBLE_IOCTL(KIOCTYPE) -COMPATIBLE_IOCTL(KIOCLAYOUT) -COMPATIBLE_IOCTL(KIOCGTRANS) -COMPATIBLE_IOCTL(KIOCTRANS) -COMPATIBLE_IOCTL(KIOCCMD) -COMPATIBLE_IOCTL(KIOCSDIRECT) -COMPATIBLE_IOCTL(KIOCSLED) -COMPATIBLE_IOCTL(KIOCGLED) -COMPATIBLE_IOCTL(KIOCSRATE) -COMPATIBLE_IOCTL(KIOCGRATE) -COMPATIBLE_IOCTL(VUIDSFORMAT) -COMPATIBLE_IOCTL(VUIDGFORMAT) /* Little v, the video4linux ioctls */ -COMPATIBLE_IOCTL(_IOR('p', 20, int[7])) /* RTCGET */ -COMPATIBLE_IOCTL(_IOW('p', 21, int[7])) /* RTCSET */ -COMPATIBLE_IOCTL(ENVCTRL_RD_WARNING_TEMPERATURE) -COMPATIBLE_IOCTL(ENVCTRL_RD_SHUTDOWN_TEMPERATURE) -COMPATIBLE_IOCTL(ENVCTRL_RD_CPU_TEMPERATURE) -COMPATIBLE_IOCTL(ENVCTRL_RD_FAN_STATUS) -COMPATIBLE_IOCTL(ENVCTRL_RD_VOLTAGE_STATUS) -COMPATIBLE_IOCTL(ENVCTRL_RD_SCSI_TEMPERATURE) -COMPATIBLE_IOCTL(ENVCTRL_RD_ETHERNET_TEMPERATURE) -COMPATIBLE_IOCTL(ENVCTRL_RD_MTHRBD_TEMPERATURE) -COMPATIBLE_IOCTL(ENVCTRL_RD_CPU_VOLTAGE) -COMPATIBLE_IOCTL(ENVCTRL_RD_GLOBALADDRESS) -/* COMPATIBLE_IOCTL(D7SIOCRD) same value as ENVCTRL_RD_VOLTAGE_STATUS */ -COMPATIBLE_IOCTL(D7SIOCWR) -COMPATIBLE_IOCTL(D7SIOCTM) -/* OPENPROMIO, SunOS/Solaris only, the NetBSD one's have - * embedded pointers in the arg which we'd need to clean up... - */ -COMPATIBLE_IOCTL(OPROMGETOPT) -COMPATIBLE_IOCTL(OPROMSETOPT) -COMPATIBLE_IOCTL(OPROMNXTOPT) -COMPATIBLE_IOCTL(OPROMSETOPT2) -COMPATIBLE_IOCTL(OPROMNEXT) -COMPATIBLE_IOCTL(OPROMCHILD) -COMPATIBLE_IOCTL(OPROMGETPROP) -COMPATIBLE_IOCTL(OPROMNXTPROP) -COMPATIBLE_IOCTL(OPROMU2P) -COMPATIBLE_IOCTL(OPROMGETCONS) -COMPATIBLE_IOCTL(OPROMGETFBNAME) -COMPATIBLE_IOCTL(OPROMGETBOOTARGS) -COMPATIBLE_IOCTL(OPROMSETCUR) -COMPATIBLE_IOCTL(OPROMPCI2NODE) -COMPATIBLE_IOCTL(OPROMPATH2NODE) -/* Big L */ -COMPATIBLE_IOCTL(LOOP_SET_STATUS64) -COMPATIBLE_IOCTL(LOOP_GET_STATUS64) -/* Big A */ -COMPATIBLE_IOCTL(AUDIO_GETINFO) -COMPATIBLE_IOCTL(AUDIO_SETINFO) -COMPATIBLE_IOCTL(AUDIO_DRAIN) -COMPATIBLE_IOCTL(AUDIO_GETDEV) -COMPATIBLE_IOCTL(AUDIO_GETDEV_SUNOS) -COMPATIBLE_IOCTL(AUDIO_FLUSH) -COMPATIBLE_IOCTL(AUTOFS_IOC_EXPIRE_MULTI) -#if defined(CONFIG_DRM) || defined(CONFIG_DRM_MODULE) -COMPATIBLE_IOCTL(DRM_IOCTL_GET_MAGIC) -COMPATIBLE_IOCTL(DRM_IOCTL_IRQ_BUSID) -COMPATIBLE_IOCTL(DRM_IOCTL_AUTH_MAGIC) -COMPATIBLE_IOCTL(DRM_IOCTL_BLOCK) -COMPATIBLE_IOCTL(DRM_IOCTL_UNBLOCK) -COMPATIBLE_IOCTL(DRM_IOCTL_CONTROL) -COMPATIBLE_IOCTL(DRM_IOCTL_ADD_BUFS) -COMPATIBLE_IOCTL(DRM_IOCTL_MARK_BUFS) -COMPATIBLE_IOCTL(DRM_IOCTL_ADD_CTX) -COMPATIBLE_IOCTL(DRM_IOCTL_RM_CTX) -COMPATIBLE_IOCTL(DRM_IOCTL_MOD_CTX) -COMPATIBLE_IOCTL(DRM_IOCTL_GET_CTX) -COMPATIBLE_IOCTL(DRM_IOCTL_SWITCH_CTX) -COMPATIBLE_IOCTL(DRM_IOCTL_NEW_CTX) -COMPATIBLE_IOCTL(DRM_IOCTL_ADD_DRAW) -COMPATIBLE_IOCTL(DRM_IOCTL_RM_DRAW) -COMPATIBLE_IOCTL(DRM_IOCTL_LOCK) -COMPATIBLE_IOCTL(DRM_IOCTL_UNLOCK) -COMPATIBLE_IOCTL(DRM_IOCTL_FINISH) -#endif /* DRM */ -COMPATIBLE_IOCTL(WIOCSTART) -COMPATIBLE_IOCTL(WIOCSTOP) -COMPATIBLE_IOCTL(WIOCGSTAT) /* And these ioctls need translation */ /* Note SIOCRTMSG is no longer, so this is safe and * the user would have seen just an -EINVAL anyways. */ HANDLE_IOCTL(FBIOPUTCMAP32, fbiogetputcmap) HANDLE_IOCTL(FBIOGETCMAP32, fbiogetputcmap) HANDLE_IOCTL(FBIOSCURSOR32, fbiogscursor) -#if defined(CONFIG_DRM) || defined(CONFIG_DRM_MODULE) -HANDLE_IOCTL(DRM32_IOCTL_VERSION, drm32_version) -HANDLE_IOCTL(DRM32_IOCTL_GET_UNIQUE, drm32_getsetunique) -HANDLE_IOCTL(DRM32_IOCTL_SET_UNIQUE, drm32_getsetunique) -HANDLE_IOCTL(DRM32_IOCTL_ADD_MAP, drm32_addmap) -HANDLE_IOCTL(DRM32_IOCTL_INFO_BUFS, drm32_info_bufs) -HANDLE_IOCTL(DRM32_IOCTL_FREE_BUFS, drm32_free_bufs) -HANDLE_IOCTL(DRM32_IOCTL_MAP_BUFS, drm32_map_bufs) -HANDLE_IOCTL(DRM32_IOCTL_DMA, drm32_dma) -HANDLE_IOCTL(DRM32_IOCTL_RES_CTX, drm32_res_ctx) -#endif /* DRM */ #if 0 HANDLE_IOCTL(RTC32_IRQP_READ, do_rtc_ioctl) HANDLE_IOCTL(RTC32_IRQP_SET, do_rtc_ioctl) diff --git a/arch/sparc64/kernel/kprobes.c b/arch/sparc64/kernel/kprobes.c index 0d66d07..96bd09b 100644 --- a/arch/sparc64/kernel/kprobes.c +++ b/arch/sparc64/kernel/kprobes.c @@ -38,6 +38,9 @@ * - Mark that we are no longer actively in a kprobe. */ +DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); + int __kprobes arch_prepare_kprobe(struct kprobe *p) { return 0; @@ -66,46 +69,39 @@ void __kprobes arch_remove_kprobe(struct kprobe *p) { } -static struct kprobe *current_kprobe; -static unsigned long current_kprobe_orig_tnpc; -static unsigned long current_kprobe_orig_tstate_pil; -static unsigned int kprobe_status; -static struct kprobe *kprobe_prev; -static unsigned long kprobe_orig_tnpc_prev; -static unsigned long kprobe_orig_tstate_pil_prev; -static unsigned int kprobe_status_prev; - -static inline void save_previous_kprobe(void) +static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) { - kprobe_status_prev = kprobe_status; - kprobe_orig_tnpc_prev = current_kprobe_orig_tnpc; - kprobe_orig_tstate_pil_prev = current_kprobe_orig_tstate_pil; - kprobe_prev = current_kprobe; + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; + kcb->prev_kprobe.orig_tnpc = kcb->kprobe_orig_tnpc; + kcb->prev_kprobe.orig_tstate_pil = kcb->kprobe_orig_tstate_pil; } -static inline void restore_previous_kprobe(void) +static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) { - kprobe_status = kprobe_status_prev; - current_kprobe_orig_tnpc = kprobe_orig_tnpc_prev; - current_kprobe_orig_tstate_pil = kprobe_orig_tstate_pil_prev; - current_kprobe = kprobe_prev; + __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + kcb->kprobe_status = kcb->prev_kprobe.status; + kcb->kprobe_orig_tnpc = kcb->prev_kprobe.orig_tnpc; + kcb->kprobe_orig_tstate_pil = kcb->prev_kprobe.orig_tstate_pil; } -static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs) +static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) { - current_kprobe_orig_tnpc = regs->tnpc; - current_kprobe_orig_tstate_pil = (regs->tstate & TSTATE_PIL); - current_kprobe = p; + __get_cpu_var(current_kprobe) = p; + kcb->kprobe_orig_tnpc = regs->tnpc; + kcb->kprobe_orig_tstate_pil = (regs->tstate & TSTATE_PIL); } -static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) +static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) { regs->tstate |= TSTATE_PIL; /*single step inline, if it a breakpoint instruction*/ if (p->opcode == BREAKPOINT_INSTRUCTION) { regs->tpc = (unsigned long) p->addr; - regs->tnpc = current_kprobe_orig_tnpc; + regs->tnpc = kcb->kprobe_orig_tnpc; } else { regs->tpc = (unsigned long) &p->ainsn.insn[0]; regs->tnpc = (unsigned long) &p->ainsn.insn[1]; @@ -117,19 +113,21 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) struct kprobe *p; void *addr = (void *) regs->tpc; int ret = 0; + struct kprobe_ctlblk *kcb; + /* + * We don't want to be preempted for the entire + * duration of kprobe processing + */ preempt_disable(); + kcb = get_kprobe_ctlblk(); if (kprobe_running()) { - /* We *are* holding lock here, so this is safe. - * Disarm the probe we just hit, and ignore it. - */ p = get_kprobe(addr); if (p) { - if (kprobe_status == KPROBE_HIT_SS) { + if (kcb->kprobe_status == KPROBE_HIT_SS) { regs->tstate = ((regs->tstate & ~TSTATE_PIL) | - current_kprobe_orig_tstate_pil); - unlock_kprobes(); + kcb->kprobe_orig_tstate_pil); goto no_kprobe; } /* We have reentered the kprobe_handler(), since @@ -138,25 +136,22 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) * just single step on the instruction of the new probe * without calling any user handlers. */ - save_previous_kprobe(); - set_current_kprobe(p, regs); + save_previous_kprobe(kcb); + set_current_kprobe(p, regs, kcb); p->nmissed++; - kprobe_status = KPROBE_REENTER; - prepare_singlestep(p, regs); + kcb->kprobe_status = KPROBE_REENTER; + prepare_singlestep(p, regs, kcb); return 1; } else { - p = current_kprobe; + p = __get_cpu_var(current_kprobe); if (p->break_handler && p->break_handler(p, regs)) goto ss_probe; } - /* If it's not ours, can't be delete race, (we hold lock). */ goto no_kprobe; } - lock_kprobes(); p = get_kprobe(addr); if (!p) { - unlock_kprobes(); if (*(u32 *)addr != BREAKPOINT_INSTRUCTION) { /* * The breakpoint instruction was removed right @@ -171,14 +166,14 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) goto no_kprobe; } - set_current_kprobe(p, regs); - kprobe_status = KPROBE_HIT_ACTIVE; + set_current_kprobe(p, regs, kcb); + kcb->kprobe_status = KPROBE_HIT_ACTIVE; if (p->pre_handler && p->pre_handler(p, regs)) return 1; ss_probe: - prepare_singlestep(p, regs); - kprobe_status = KPROBE_HIT_SS; + prepare_singlestep(p, regs, kcb); + kcb->kprobe_status = KPROBE_HIT_SS; return 1; no_kprobe: @@ -260,11 +255,12 @@ static void __kprobes retpc_fixup(struct pt_regs *regs, u32 insn, * This function prepares to return from the post-single-step * breakpoint trap. */ -static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) +static void __kprobes resume_execution(struct kprobe *p, + struct pt_regs *regs, struct kprobe_ctlblk *kcb) { u32 insn = p->ainsn.insn[0]; - regs->tpc = current_kprobe_orig_tnpc; + regs->tpc = kcb->kprobe_orig_tnpc; regs->tnpc = relbranch_fixup(insn, (unsigned long) p->addr, (unsigned long) &p->ainsn.insn[0], @@ -272,44 +268,48 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) retpc_fixup(regs, insn, (unsigned long) p->addr); regs->tstate = ((regs->tstate & ~TSTATE_PIL) | - current_kprobe_orig_tstate_pil); + kcb->kprobe_orig_tstate_pil); } static inline int post_kprobe_handler(struct pt_regs *regs) { - if (!kprobe_running()) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) return 0; - if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) { - kprobe_status = KPROBE_HIT_SSDONE; - current_kprobe->post_handler(current_kprobe, regs, 0); + if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); } - resume_execution(current_kprobe, regs); + resume_execution(cur, regs, kcb); /*Restore back the original saved kprobes variables and continue. */ - if (kprobe_status == KPROBE_REENTER) { - restore_previous_kprobe(); + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); goto out; } - unlock_kprobes(); + reset_current_kprobe(); out: preempt_enable_no_resched(); return 1; } -/* Interrupts disabled, kprobe_lock held. */ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) { - if (current_kprobe->fault_handler - && current_kprobe->fault_handler(current_kprobe, regs, trapnr)) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) return 1; - if (kprobe_status & KPROBE_HIT_SS) { - resume_execution(current_kprobe, regs); + if (kcb->kprobe_status & KPROBE_HIT_SS) { + resume_execution(cur, regs, kcb); - unlock_kprobes(); + reset_current_kprobe(); preempt_enable_no_resched(); } return 0; @@ -322,29 +322,30 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; + int ret = NOTIFY_DONE; + switch (val) { case DIE_DEBUG: if (kprobe_handler(args->regs)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_DEBUG_2: if (post_kprobe_handler(args->regs)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_GPF: - if (kprobe_running() && - kprobe_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; - break; case DIE_PAGE_FAULT: + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); if (kprobe_running() && kprobe_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; + preempt_enable(); break; default: break; } - return NOTIFY_DONE; + return ret; } asmlinkage void __kprobes kprobe_trap(unsigned long trap_level, @@ -368,24 +369,21 @@ asmlinkage void __kprobes kprobe_trap(unsigned long trap_level, } /* Jprobes support. */ -static struct pt_regs jprobe_saved_regs; -static struct pt_regs *jprobe_saved_regs_location; -static struct sparc_stackf jprobe_saved_stack; - int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - jprobe_saved_regs_location = regs; - memcpy(&jprobe_saved_regs, regs, sizeof(*regs)); + kcb->jprobe_saved_regs_location = regs; + memcpy(&(kcb->jprobe_saved_regs), regs, sizeof(*regs)); /* Save a whole stack frame, this gets arguments * pushed onto the stack after using up all the * arg registers. */ - memcpy(&jprobe_saved_stack, + memcpy(&(kcb->jprobe_saved_stack), (char *) (regs->u_regs[UREG_FP] + STACK_BIAS), - sizeof(jprobe_saved_stack)); + sizeof(kcb->jprobe_saved_stack)); regs->tpc = (unsigned long) jp->entry; regs->tnpc = ((unsigned long) jp->entry) + 0x4UL; @@ -396,7 +394,6 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) void __kprobes jprobe_return(void) { - preempt_enable_no_resched(); __asm__ __volatile__( ".globl jprobe_return_trap_instruction\n" "jprobe_return_trap_instruction:\n\t" @@ -410,14 +407,15 @@ extern void __show_regs(struct pt_regs * regs); int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { u32 *addr = (u32 *) regs->tpc; + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); if (addr == (u32 *) jprobe_return_trap_instruction) { - if (jprobe_saved_regs_location != regs) { + if (kcb->jprobe_saved_regs_location != regs) { printk("JPROBE: Current regs (%p) does not match " "saved regs (%p).\n", - regs, jprobe_saved_regs_location); + regs, kcb->jprobe_saved_regs_location); printk("JPROBE: Saved registers\n"); - __show_regs(jprobe_saved_regs_location); + __show_regs(kcb->jprobe_saved_regs_location); printk("JPROBE: Current registers\n"); __show_regs(regs); BUG(); @@ -426,12 +424,13 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) * first so that UREG_FP is the original one for * the stack frame restore. */ - memcpy(regs, &jprobe_saved_regs, sizeof(*regs)); + memcpy(regs, &(kcb->jprobe_saved_regs), sizeof(*regs)); memcpy((char *) (regs->u_regs[UREG_FP] + STACK_BIAS), - &jprobe_saved_stack, - sizeof(jprobe_saved_stack)); + &(kcb->jprobe_saved_stack), + sizeof(kcb->jprobe_saved_stack)); + preempt_enable_no_resched(); return 1; } return 0; diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c index 7d10b03..02f9dec 100644 --- a/arch/sparc64/kernel/process.c +++ b/arch/sparc64/kernel/process.c @@ -74,7 +74,9 @@ void cpu_idle(void) while (!need_resched()) barrier(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); check_pgt_cache(); } } @@ -83,21 +85,31 @@ void cpu_idle(void) /* * the idle loop on a UltraMultiPenguin... + * + * TIF_POLLING_NRFLAG is set because we do not sleep the cpu + * inside of the idler task, so an interrupt is not needed + * to get a clean fast response. + * + * XXX Reverify this assumption... -DaveM + * + * Addendum: We do want it to do something for the signal + * delivery case, we detect that by just seeing + * if we are trying to send this to an idler or not. */ -#define idle_me_harder() (cpu_data(smp_processor_id()).idle_volume += 1) -#define unidle_me() (cpu_data(smp_processor_id()).idle_volume = 0) void cpu_idle(void) { + cpuinfo_sparc *cpuinfo = &local_cpu_data(); set_thread_flag(TIF_POLLING_NRFLAG); + while(1) { if (need_resched()) { - unidle_me(); - clear_thread_flag(TIF_POLLING_NRFLAG); + cpuinfo->idle_volume = 0; + preempt_enable_no_resched(); schedule(); - set_thread_flag(TIF_POLLING_NRFLAG); + preempt_disable(); check_pgt_cache(); } - idle_me_harder(); + cpuinfo->idle_volume++; /* The store ordering is so that IRQ handlers on * other cpus see our increasing idleness for the buddy diff --git a/arch/sparc64/kernel/sbus.c b/arch/sparc64/kernel/sbus.c index e09ddf9..96b8250 100644 --- a/arch/sparc64/kernel/sbus.c +++ b/arch/sparc64/kernel/sbus.c @@ -790,7 +790,7 @@ static unsigned long sysio_irq_offsets[] = { #undef bogon -#define NUM_SYSIO_OFFSETS (sizeof(sysio_irq_offsets) / sizeof(sysio_irq_offsets[0])) +#define NUM_SYSIO_OFFSETS ARRAY_SIZE(sysio_irq_offsets) /* Convert Interrupt Mapping register pointer to associated * Interrupt Clear register pointer, SYSIO specific version. diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index c1f3423..bf1849d 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -154,6 +154,7 @@ int prom_callback(long *args) pud_t *pudp; pmd_t *pmdp; pte_t *ptep; + pte_t pte; for_each_process(p) { mm = p->mm; @@ -178,8 +179,9 @@ int prom_callback(long *args) * being called from inside OBP. */ ptep = pte_offset_map(pmdp, va); - if (pte_present(*ptep)) { - tte = pte_val(*ptep); + pte = *ptep; + if (pte_present(pte)) { + tte = pte_val(pte); res = PROM_TRUE; } pte_unmap(ptep); @@ -218,6 +220,7 @@ int prom_callback(long *args) pud_t *pudp; pmd_t *pmdp; pte_t *ptep; + pte_t pte; int error; if ((va >= LOW_OBP_ADDRESS) && (va < HI_OBP_ADDRESS)) { @@ -240,8 +243,9 @@ int prom_callback(long *args) * being called from inside OBP. */ ptep = pte_offset_kernel(pmdp, va); - if (pte_present(*ptep)) { - tte = pte_val(*ptep); + pte = *ptep; + if (pte_present(pte)) { + tte = pte_val(pte); res = PROM_TRUE; } goto done; diff --git a/arch/sparc64/kernel/signal32.c b/arch/sparc64/kernel/signal32.c index aecccd0..009a86e 100644 --- a/arch/sparc64/kernel/signal32.c +++ b/arch/sparc64/kernel/signal32.c @@ -863,6 +863,7 @@ static void new_setup_frame32(struct k_sigaction *ka, struct pt_regs *regs, pud_t *pudp = pud_offset(pgdp, address); pmd_t *pmdp = pmd_offset(pudp, address); pte_t *ptep; + pte_t pte; regs->u_regs[UREG_I7] = (unsigned long) (&(sf->insns[0]) - 2); @@ -873,9 +874,10 @@ static void new_setup_frame32(struct k_sigaction *ka, struct pt_regs *regs, preempt_disable(); ptep = pte_offset_map(pmdp, address); - if (pte_present(*ptep)) { + pte = *ptep; + if (pte_present(pte)) { unsigned long page = (unsigned long) - page_address(pte_page(*ptep)); + page_address(pte_page(pte)); wmb(); __asm__ __volatile__("flush %0 + %1" diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index b137fd6..797a654 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -168,6 +168,9 @@ void __init smp_callin(void) rmb(); cpu_set(cpuid, cpu_online_map); + + /* idle thread is expected to have preempt disabled */ + preempt_disable(); } void cpu_panic(void) @@ -839,43 +842,29 @@ void smp_flush_tlb_all(void) * questionable (in theory the big win for threads is the massive sharing of * address space state across processors). */ + +/* This currently is only used by the hugetlb arch pre-fault + * hook on UltraSPARC-III+ and later when changing the pagesize + * bits of the context register for an address space. + */ void smp_flush_tlb_mm(struct mm_struct *mm) { - /* - * This code is called from two places, dup_mmap and exit_mmap. In the - * former case, we really need a flush. In the later case, the callers - * are single threaded exec_mmap (really need a flush), multithreaded - * exec_mmap case (do not need to flush, since the caller gets a new - * context via activate_mm), and all other callers of mmput() whence - * the flush can be optimized since the associated threads are dead and - * the mm is being torn down (__exit_mm and other mmput callers) or the - * owning thread is dissociating itself from the mm. The - * (atomic_read(&mm->mm_users) == 0) check ensures real work is done - * for single thread exec and dup_mmap cases. An alternate check might - * have been (current->mm != mm). - * Kanoj Sarcar - */ - if (atomic_read(&mm->mm_users) == 0) - return; - - { - u32 ctx = CTX_HWBITS(mm->context); - int cpu = get_cpu(); + u32 ctx = CTX_HWBITS(mm->context); + int cpu = get_cpu(); - if (atomic_read(&mm->mm_users) == 1) { - mm->cpu_vm_mask = cpumask_of_cpu(cpu); - goto local_flush_and_out; - } + if (atomic_read(&mm->mm_users) == 1) { + mm->cpu_vm_mask = cpumask_of_cpu(cpu); + goto local_flush_and_out; + } - smp_cross_call_masked(&xcall_flush_tlb_mm, - ctx, 0, 0, - mm->cpu_vm_mask); + smp_cross_call_masked(&xcall_flush_tlb_mm, + ctx, 0, 0, + mm->cpu_vm_mask); - local_flush_and_out: - __flush_tlb_mm(ctx, SECONDARY_CONTEXT); +local_flush_and_out: + __flush_tlb_mm(ctx, SECONDARY_CONTEXT); - put_cpu(); - } + put_cpu(); } void smp_flush_tlb_pending(struct mm_struct *mm, unsigned long nr, unsigned long *vaddrs) @@ -883,34 +872,13 @@ void smp_flush_tlb_pending(struct mm_struct *mm, unsigned long nr, unsigned long u32 ctx = CTX_HWBITS(mm->context); int cpu = get_cpu(); - if (mm == current->active_mm && atomic_read(&mm->mm_users) == 1) { + if (mm == current->active_mm && atomic_read(&mm->mm_users) == 1) mm->cpu_vm_mask = cpumask_of_cpu(cpu); - goto local_flush_and_out; - } else { - /* This optimization is not valid. Normally - * we will be holding the page_table_lock, but - * there is an exception which is copy_page_range() - * when forking. The lock is held during the individual - * page table updates in the parent, but not at the - * top level, which is where we are invoked. - */ - if (0) { - cpumask_t this_cpu_mask = cpumask_of_cpu(cpu); - - /* By virtue of running under the mm->page_table_lock, - * and mmu_context.h:switch_mm doing the same, the - * following operation is safe. - */ - if (cpus_equal(mm->cpu_vm_mask, this_cpu_mask)) - goto local_flush_and_out; - } - } - - smp_cross_call_masked(&xcall_flush_tlb_pending, - ctx, nr, (unsigned long) vaddrs, - mm->cpu_vm_mask); + else + smp_cross_call_masked(&xcall_flush_tlb_pending, + ctx, nr, (unsigned long) vaddrs, + mm->cpu_vm_mask); -local_flush_and_out: __flush_tlb_pending(ctx, nr, vaddrs); put_cpu(); @@ -1184,20 +1152,9 @@ void __init smp_cpus_done(unsigned int max_cpus) (bogosum/(5000/HZ))%100); } -/* This needn't do anything as we do not sleep the cpu - * inside of the idler task, so an interrupt is not needed - * to get a clean fast response. - * - * XXX Reverify this assumption... -DaveM - * - * Addendum: We do want it to do something for the signal - * delivery case, we detect that by just seeing - * if we are trying to send this to an idler or not. - */ void smp_send_reschedule(int cpu) { - if (cpu_data(cpu).idle_volume == 0) - smp_receive_signal(cpu); + smp_receive_signal(cpu); } /* This is a nop because we capture all other cpus diff --git a/arch/sparc64/kernel/sunos_ioctl32.c b/arch/sparc64/kernel/sunos_ioctl32.c index 7654b8a..3f619ea 100644 --- a/arch/sparc64/kernel/sunos_ioctl32.c +++ b/arch/sparc64/kernel/sunos_ioctl32.c @@ -24,7 +24,6 @@ #include <linux/smp_lock.h> #include <linux/syscalls.h> #include <linux/compat.h> -#include <asm/kbio.h> #define SUNOS_NR_OPEN 256 diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c index 38c5525..459c8fb 100644 --- a/arch/sparc64/kernel/time.c +++ b/arch/sparc64/kernel/time.c @@ -60,17 +60,6 @@ static void __iomem *mstk48t59_regs; static int set_rtc_mmss(unsigned long); -static __init unsigned long dummy_get_tick(void) -{ - return 0; -} - -static __initdata struct sparc64_tick_ops dummy_tick_ops = { - .get_tick = dummy_get_tick, -}; - -struct sparc64_tick_ops *tick_ops __read_mostly = &dummy_tick_ops; - #define TICK_PRIV_BIT (1UL << 63) #ifdef CONFIG_SMP @@ -200,6 +189,8 @@ static struct sparc64_tick_ops tick_operations __read_mostly = { .softint_mask = 1UL << 0, }; +struct sparc64_tick_ops *tick_ops __read_mostly = &tick_operations; + static void stick_init_tick(unsigned long offset) { tick_disable_protection(); diff --git a/arch/sparc64/kernel/us2e_cpufreq.c b/arch/sparc64/kernel/us2e_cpufreq.c index 686e526..b35dc8d 100644 --- a/arch/sparc64/kernel/us2e_cpufreq.c +++ b/arch/sparc64/kernel/us2e_cpufreq.c @@ -388,10 +388,8 @@ err_out: kfree(driver); cpufreq_us2e_driver = NULL; } - if (us2e_freq_table) { - kfree(us2e_freq_table); - us2e_freq_table = NULL; - } + kfree(us2e_freq_table); + us2e_freq_table = NULL; return ret; } @@ -402,7 +400,6 @@ static void __exit us2e_freq_exit(void) { if (cpufreq_us2e_driver) { cpufreq_unregister_driver(cpufreq_us2e_driver); - kfree(cpufreq_us2e_driver); cpufreq_us2e_driver = NULL; kfree(us2e_freq_table); diff --git a/arch/sparc64/kernel/us3_cpufreq.c b/arch/sparc64/kernel/us3_cpufreq.c index 0340041..6d1f9a3 100644 --- a/arch/sparc64/kernel/us3_cpufreq.c +++ b/arch/sparc64/kernel/us3_cpufreq.c @@ -249,10 +249,8 @@ err_out: kfree(driver); cpufreq_us3_driver = NULL; } - if (us3_freq_table) { - kfree(us3_freq_table); - us3_freq_table = NULL; - } + kfree(us3_freq_table); + us3_freq_table = NULL; return ret; } @@ -263,7 +261,6 @@ static void __exit us3_freq_exit(void) { if (cpufreq_us3_driver) { cpufreq_unregister_driver(cpufreq_us3_driver); - kfree(cpufreq_us3_driver); cpufreq_us3_driver = NULL; kfree(us3_freq_table); diff --git a/arch/sparc64/mm/fault.c b/arch/sparc64/mm/fault.c index 31fbc67..6f0539a 100644 --- a/arch/sparc64/mm/fault.c +++ b/arch/sparc64/mm/fault.c @@ -30,8 +30,6 @@ #include <asm/sections.h> #include <asm/kdebug.h> -#define ELEMENTS(arr) (sizeof (arr)/sizeof (arr[0])) - /* * To debug kernel to catch accesses to certain virtual/physical addresses. * Mode = 0 selects physical watchpoints, mode = 1 selects virtual watchpoints. @@ -109,7 +107,7 @@ static void bad_kernel_pc(struct pt_regs *regs) * this. Additionally, to prevent kswapd from ripping ptes from * under us, raise interrupts around the time that we look at the * pte, kswapd will have to wait to get his smp ipi response from - * us. This saves us having to get page_table_lock. + * us. vmtruncate likewise. This saves us having to get pte lock. */ static unsigned int get_user_insn(unsigned long tpc) { diff --git a/arch/sparc64/oprofile/Kconfig b/arch/sparc64/oprofile/Kconfig index 5ade198..d8a8408 100644 --- a/arch/sparc64/oprofile/Kconfig +++ b/arch/sparc64/oprofile/Kconfig @@ -1,7 +1,3 @@ - -menu "Profiling support" - depends on EXPERIMENTAL - config PROFILING bool "Profiling support (EXPERIMENTAL)" help @@ -19,5 +15,3 @@ config OPROFILE If unsure, say N. -endmenu - diff --git a/arch/um/Kconfig b/arch/um/Kconfig index cd06ed7..3b5f47c 100644 --- a/arch/um/Kconfig +++ b/arch/um/Kconfig @@ -65,6 +65,30 @@ config STATIC_LINK chroot, and you disable CONFIG_MODE_TT, you probably want to say Y here. +config HOST_2G_2G + bool "2G/2G host address space split" + default n + depends on MODE_TT + help + This is needed when the host on which you run has a 2G/2G memory + split, instead of the customary 3G/1G. + + Note that to enable such a host + configuration, which makes sense only in some cases, you need special + host patches. + + So, if you do not know what to do here, say 'N'. + +config KERNEL_HALF_GIGS + int "Kernel address space size (in .5G units)" + default "1" + depends on MODE_TT + help + This determines the amount of address space that UML will allocate for + its own, measured in half Gigabyte units. The default is 1. + Change this only if you need to boot UML with an unusually large amount + of physical memory. + config MODE_SKAS bool "Separate Kernel Address Space support" default y @@ -182,19 +206,6 @@ config MAGIC_SYSRQ The keys are documented in <file:Documentation/sysrq.txt>. Don't say Y unless you really know what this hack does. -config HOST_2G_2G - bool "2G/2G host address space split" - default n - help - This is needed when the host on which you run has a 2G/2G memory - split, instead of the customary 3G/1G. - - Note that to enable such a host - configuration, which makes sense only in some cases, you need special - host patches. - - So, if you do not know what to do here, say 'N'. - config SMP bool "Symmetric multi-processing support (EXPERIMENTAL)" default n @@ -241,15 +252,6 @@ config NEST_LEVEL set to the host's CONFIG_NEST_LEVEL + CONFIG_KERNEL_HALF_GIGS. Only change this if you are running nested UMLs. -config KERNEL_HALF_GIGS - int "Kernel address space size (in .5G units)" - default "1" - help - This determines the amount of address space that UML will allocate for - its own, measured in half Gigabyte units. The default is 1. - Change this only if you need to boot UML with an unusually large amount - of physical memory. - config HIGHMEM bool "Highmem support" depends on !64BIT diff --git a/arch/um/Makefile b/arch/um/Makefile index e1ffad2..e55d32e 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -60,7 +60,7 @@ AFLAGS += $(ARCH_INCLUDE) USER_CFLAGS := $(patsubst -I%,,$(CFLAGS)) USER_CFLAGS := $(patsubst -D__KERNEL__,,$(USER_CFLAGS)) $(ARCH_INCLUDE) \ - $(MODE_INCLUDE) + $(MODE_INCLUDE) -D_FILE_OFFSET_BITS=64 # -Derrno=kernel_errno - This turns all kernel references to errno into # kernel_errno to separate them from the libc errno. This allows -fno-common diff --git a/arch/um/Makefile-i386 b/arch/um/Makefile-i386 index aef7c50..1f7dcb0 100644 --- a/arch/um/Makefile-i386 +++ b/arch/um/Makefile-i386 @@ -17,8 +17,6 @@ ifeq ("$(origin SUBARCH)", "command line") ifneq ("$(shell uname -m | sed -e s/i.86/i386/)", "$(SUBARCH)") CFLAGS += $(call cc-option,-m32) USER_CFLAGS += $(call cc-option,-m32) -HOSTCFLAGS += $(call cc-option,-m32) -HOSTLDFLAGS += $(call cc-option,-m32) AFLAGS += $(call cc-option,-m32) LINK-y += $(call cc-option,-m32) UML_OBJCOPYFLAGS += -F $(ELF_FORMAT) diff --git a/arch/um/drivers/chan_user.c b/arch/um/drivers/chan_user.c index de3bce7..1c55d58 100644 --- a/arch/um/drivers/chan_user.c +++ b/arch/um/drivers/chan_user.c @@ -16,7 +16,6 @@ #include "user_util.h" #include "chan_user.h" #include "user.h" -#include "helper.h" #include "os.h" #include "choose-mode.h" #include "mode.h" diff --git a/arch/um/drivers/harddog_kern.c b/arch/um/drivers/harddog_kern.c index 147ec19..49acb2b 100644 --- a/arch/um/drivers/harddog_kern.c +++ b/arch/um/drivers/harddog_kern.c @@ -46,7 +46,6 @@ #include <linux/smp_lock.h> #include <linux/init.h> #include <asm/uaccess.h> -#include "helper.h" #include "mconsole.h" MODULE_LICENSE("GPL"); diff --git a/arch/um/drivers/harddog_user.c b/arch/um/drivers/harddog_user.c index d934181..def013b 100644 --- a/arch/um/drivers/harddog_user.c +++ b/arch/um/drivers/harddog_user.c @@ -8,7 +8,6 @@ #include <errno.h> #include "user_util.h" #include "user.h" -#include "helper.h" #include "mconsole.h" #include "os.h" #include "choose-mode.h" diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c index 721e260..4cf31a2 100644 --- a/arch/um/drivers/net_kern.c +++ b/arch/um/drivers/net_kern.c @@ -96,7 +96,6 @@ irqreturn_t uml_net_interrupt(int irq, void *dev_id, struct pt_regs *regs) static int uml_net_open(struct net_device *dev) { struct uml_net_private *lp = dev->priv; - char addr[sizeof("255.255.255.255\0")]; int err; spin_lock(&lp->lock); @@ -107,7 +106,7 @@ static int uml_net_open(struct net_device *dev) } if(!lp->have_mac){ - dev_ip_addr(dev, addr, &lp->mac[2]); + dev_ip_addr(dev, &lp->mac[2]); set_ether_mac(dev, lp->mac); } @@ -244,34 +243,18 @@ static int uml_net_change_mtu(struct net_device *dev, int new_mtu) return err; } -static int uml_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ - static const struct ethtool_drvinfo info = { - .cmd = ETHTOOL_GDRVINFO, - .driver = DRIVER_NAME, - .version = "42", - }; - void *useraddr; - u32 ethcmd; - - switch (cmd) { - case SIOCETHTOOL: - useraddr = ifr->ifr_data; - if (copy_from_user(ðcmd, useraddr, sizeof(ethcmd))) - return -EFAULT; - switch (ethcmd) { - case ETHTOOL_GDRVINFO: - if (copy_to_user(useraddr, &info, sizeof(info))) - return -EFAULT; - return 0; - default: - return -EOPNOTSUPP; - } - default: - return -EINVAL; - } +static void uml_net_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + strcpy(info->driver, DRIVER_NAME); + strcpy(info->version, "42"); } +static struct ethtool_ops uml_net_ethtool_ops = { + .get_drvinfo = uml_net_get_drvinfo, + .get_link = ethtool_op_get_link, +}; + void uml_net_user_timer_expire(unsigned long _conn) { #ifdef undef @@ -360,7 +343,7 @@ static int eth_configure(int n, void *init, char *mac, dev->tx_timeout = uml_net_tx_timeout; dev->set_mac_address = uml_net_set_mac; dev->change_mtu = uml_net_change_mtu; - dev->do_ioctl = uml_net_ioctl; + dev->ethtool_ops = ¨_net_ethtool_ops; dev->watchdog_timeo = (HZ >> 1); dev->irq = UM_ETH_IRQ; @@ -664,8 +647,6 @@ static int uml_inetaddr_event(struct notifier_block *this, unsigned long event, void *ptr) { struct in_ifaddr *ifa = ptr; - u32 addr = ifa->ifa_address; - u32 netmask = ifa->ifa_mask; struct net_device *dev = ifa->ifa_dev->dev; struct uml_net_private *lp; void (*proc)(unsigned char *, unsigned char *, void *); @@ -685,14 +666,8 @@ static int uml_inetaddr_event(struct notifier_block *this, unsigned long event, break; } if(proc != NULL){ - addr_buf[0] = addr & 0xff; - addr_buf[1] = (addr >> 8) & 0xff; - addr_buf[2] = (addr >> 16) & 0xff; - addr_buf[3] = addr >> 24; - netmask_buf[0] = netmask & 0xff; - netmask_buf[1] = (netmask >> 8) & 0xff; - netmask_buf[2] = (netmask >> 16) & 0xff; - netmask_buf[3] = netmask >> 24; + memcpy(addr_buf, &ifa->ifa_address, sizeof(addr_buf)); + memcpy(netmask_buf, &ifa->ifa_mask, sizeof(netmask_buf)); (*proc)(addr_buf, netmask_buf, &lp->user); } return(NOTIFY_DONE); @@ -774,27 +749,18 @@ int setup_etheraddr(char *str, unsigned char *addr) return(1); } -void dev_ip_addr(void *d, char *buf, char *bin_buf) +void dev_ip_addr(void *d, unsigned char *bin_buf) { struct net_device *dev = d; struct in_device *ip = dev->ip_ptr; struct in_ifaddr *in; - u32 addr; if((ip == NULL) || ((in = ip->ifa_list) == NULL)){ printk(KERN_WARNING "dev_ip_addr - device not assigned an " "IP address\n"); return; } - addr = in->ifa_address; - sprintf(buf, "%d.%d.%d.%d", addr & 0xff, (addr >> 8) & 0xff, - (addr >> 16) & 0xff, addr >> 24); - if(bin_buf){ - bin_buf[0] = addr & 0xff; - bin_buf[1] = (addr >> 8) & 0xff; - bin_buf[2] = (addr >> 16) & 0xff; - bin_buf[3] = addr >> 24; - } + memcpy(bin_buf, &in->ifa_address, sizeof(in->ifa_address)); } void set_ether_mac(void *d, unsigned char *addr) @@ -829,14 +795,8 @@ void iter_addresses(void *d, void (*cb)(unsigned char *, unsigned char *, if(ip == NULL) return; in = ip->ifa_list; while(in != NULL){ - address[0] = in->ifa_address & 0xff; - address[1] = (in->ifa_address >> 8) & 0xff; - address[2] = (in->ifa_address >> 16) & 0xff; - address[3] = in->ifa_address >> 24; - netmask[0] = in->ifa_mask & 0xff; - netmask[1] = (in->ifa_mask >> 8) & 0xff; - netmask[2] = (in->ifa_mask >> 16) & 0xff; - netmask[3] = in->ifa_mask >> 24; + memcpy(address, &in->ifa_address, sizeof(address)); + memcpy(netmask, &in->ifa_mask, sizeof(netmask)); (*cb)(address, netmask, arg); in = in->ifa_next; } diff --git a/arch/um/drivers/net_user.c b/arch/um/drivers/net_user.c index 3730d4f..098fa65 100644 --- a/arch/um/drivers/net_user.c +++ b/arch/um/drivers/net_user.c @@ -16,7 +16,6 @@ #include "user_util.h" #include "kern_util.h" #include "net_user.h" -#include "helper.h" #include "os.h" int tap_open_common(void *dev, char *gate_addr) diff --git a/arch/um/drivers/port_user.c b/arch/um/drivers/port_user.c index 14dd200..ed4a1a6 100644 --- a/arch/um/drivers/port_user.c +++ b/arch/um/drivers/port_user.c @@ -18,7 +18,6 @@ #include "user.h" #include "chan_user.h" #include "port.h" -#include "helper.h" #include "os.h" struct port_chan { diff --git a/arch/um/drivers/random.c b/arch/um/drivers/random.c index f9e2219..ba471f5 100644 --- a/arch/um/drivers/random.c +++ b/arch/um/drivers/random.c @@ -58,10 +58,8 @@ static ssize_t rng_dev_read (struct file *filp, char __user *buf, size_t size, if (filp->f_flags & O_NONBLOCK) return ret ? : -EAGAIN; - if(need_resched()){ - current->state = TASK_INTERRUPTIBLE; - schedule_timeout(1); - } + if(need_resched()) + schedule_timeout_interruptible(1); } else return n; if (signal_pending (current)) diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c index 71af444..89fbec1 100644 --- a/arch/um/drivers/slip_user.c +++ b/arch/um/drivers/slip_user.c @@ -14,7 +14,6 @@ #include "net_user.h" #include "slip.h" #include "slip_common.h" -#include "helper.h" #include "os.h" void slip_user_init(void *data, void *dev) diff --git a/arch/um/drivers/slirp_user.c b/arch/um/drivers/slirp_user.c index 8d91f66..b94c661 100644 --- a/arch/um/drivers/slirp_user.c +++ b/arch/um/drivers/slirp_user.c @@ -13,7 +13,6 @@ #include "net_user.h" #include "slirp.h" #include "slip_common.h" -#include "helper.h" #include "os.h" void slirp_user_init(void *data, void *dev) diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c index 90e0e5f..b530f1a 100644 --- a/arch/um/drivers/xterm.c +++ b/arch/um/drivers/xterm.c @@ -14,7 +14,6 @@ #include <sys/socket.h> #include "kern_util.h" #include "chan_user.h" -#include "helper.h" #include "user_util.h" #include "user.h" #include "os.h" diff --git a/arch/um/include/helper.h b/arch/um/include/helper.h deleted file mode 100644 index 162ac31..0000000 --- a/arch/um/include/helper.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#ifndef __HELPER_H__ -#define __HELPER_H__ - -extern int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, - unsigned long *stack_out); -extern int run_helper_thread(int (*proc)(void *), void *arg, - unsigned int flags, unsigned long *stack_out, - int stack_order); -extern int helper_wait(int pid); - -#endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/include/mem_user.h b/arch/um/include/mem_user.h index 9fef412..a1064c5 100644 --- a/arch/um/include/mem_user.h +++ b/arch/um/include/mem_user.h @@ -57,7 +57,7 @@ extern int init_maps(unsigned long physmem, unsigned long iomem, unsigned long highmem); extern unsigned long get_vm(unsigned long len); extern void setup_physmem(unsigned long start, unsigned long usable, - unsigned long len, unsigned long highmem); + unsigned long len, unsigned long long highmem); extern void add_iomem(char *name, int fd, unsigned long size); extern unsigned long phys_offset(unsigned long phys); extern void unmap_physmem(void); diff --git a/arch/um/include/net_kern.h b/arch/um/include/net_kern.h index 1c07949..f7de6df 100644 --- a/arch/um/include/net_kern.h +++ b/arch/um/include/net_kern.h @@ -6,10 +6,11 @@ #ifndef __UM_NET_KERN_H #define __UM_NET_KERN_H -#include "linux/netdevice.h" -#include "linux/skbuff.h" -#include "linux/socket.h" -#include "linux/list.h" +#include <linux/netdevice.h> +#include <linux/platform_device.h> +#include <linux/skbuff.h> +#include <linux/socket.h> +#include <linux/list.h> struct uml_net { struct list_head list; diff --git a/arch/um/include/net_user.h b/arch/um/include/net_user.h index 89885a7..800c403 100644 --- a/arch/um/include/net_user.h +++ b/arch/um/include/net_user.h @@ -25,7 +25,7 @@ struct net_user_info { }; extern void ether_user_init(void *data, void *dev); -extern void dev_ip_addr(void *d, char *buf, char *bin_buf); +extern void dev_ip_addr(void *d, unsigned char *bin_buf); extern void set_ether_mac(void *d, unsigned char *addr); extern void iter_addresses(void *d, void (*cb)(unsigned char *, unsigned char *, void *), diff --git a/arch/um/include/os.h b/arch/um/include/os.h index 2e58e30..2cccfa5 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -167,7 +167,7 @@ extern int can_do_skas(void); #endif /* mem.c */ -extern int create_mem_file(unsigned long len); +extern int create_mem_file(unsigned long long len); /* process.c */ extern unsigned long os_process_pc(int pid); @@ -199,6 +199,20 @@ extern void forward_pending_sigio(int target); extern int start_fork_tramp(void *arg, unsigned long temp_stack, int clone_flags, int (*tramp)(void *)); +/* uaccess.c */ +extern unsigned long __do_user_copy(void *to, const void *from, int n, + void **fault_addr, void **fault_catcher, + void (*op)(void *to, const void *from, + int n), int *faulted_out); + +/* helper.c */ +extern int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, + unsigned long *stack_out); +extern int run_helper_thread(int (*proc)(void *), void *arg, + unsigned int flags, unsigned long *stack_out, + int stack_order); +extern int helper_wait(int pid); + #endif /* diff --git a/arch/um/include/sysdep-i386/stub.h b/arch/um/include/sysdep-i386/stub.h index d3699fe..a49ceb1 100644 --- a/arch/um/include/sysdep-i386/stub.h +++ b/arch/um/include/sysdep-i386/stub.h @@ -16,45 +16,69 @@ extern void stub_clone_handler(void); #define STUB_MMAP_NR __NR_mmap2 #define MMAP_OFFSET(o) ((o) >> PAGE_SHIFT) +static inline long stub_syscall1(long syscall, long arg1) +{ + long ret; + + __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1)); + + return ret; +} + static inline long stub_syscall2(long syscall, long arg1, long arg2) { long ret; - __asm__("movl %0, %%ecx; " : : "g" (arg2) : "%ecx"); - __asm__("movl %0, %%ebx; " : : "g" (arg1) : "%ebx"); - __asm__("movl %0, %%eax; " : : "g" (syscall) : "%eax"); - __asm__("int $0x80;" : : : "%eax"); - __asm__ __volatile__("movl %%eax, %0; " : "=g" (ret) :); - return(ret); + __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1), + "c" (arg2)); + + return ret; } static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3) { - __asm__("movl %0, %%edx; " : : "g" (arg3) : "%edx"); - return(stub_syscall2(syscall, arg1, arg2)); + long ret; + + __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1), + "c" (arg2), "d" (arg3)); + + return ret; } static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3, long arg4) { - __asm__("movl %0, %%esi; " : : "g" (arg4) : "%esi"); - return(stub_syscall3(syscall, arg1, arg2, arg3)); + long ret; + + __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1), + "c" (arg2), "d" (arg3), "S" (arg4)); + + return ret; +} + +static inline long stub_syscall5(long syscall, long arg1, long arg2, long arg3, + long arg4, long arg5) +{ + long ret; + + __asm__ volatile ("int $0x80" : "=a" (ret) : "0" (syscall), "b" (arg1), + "c" (arg2), "d" (arg3), "S" (arg4), "D" (arg5)); + + return ret; } static inline long stub_syscall6(long syscall, long arg1, long arg2, long arg3, long arg4, long arg5, long arg6) { long ret; - __asm__("movl %0, %%eax; " : : "g" (syscall) : "%eax"); - __asm__("movl %0, %%ebx; " : : "g" (arg1) : "%ebx"); - __asm__("movl %0, %%ecx; " : : "g" (arg2) : "%ecx"); - __asm__("movl %0, %%edx; " : : "g" (arg3) : "%edx"); - __asm__("movl %0, %%esi; " : : "g" (arg4) : "%esi"); - __asm__("movl %0, %%edi; " : : "g" (arg5) : "%edi"); - __asm__ __volatile__("pushl %%ebp ; movl %1, %%ebp; " - "int $0x80; popl %%ebp ; " - "movl %%eax, %0; " : "=g" (ret) : "g" (arg6) : "%eax"); - return(ret); + + __asm__ volatile ("push %%ebp ; movl %%eax,%%ebp ; movl %1,%%eax ; " + "int $0x80 ; pop %%ebp" + : "=a" (ret) + : "g" (syscall), "b" (arg1), "c" (arg2), "d" (arg3), + "S" (arg4), "D" (arg5), "0" (arg6)); + + return ret; } static inline void trap_myself(void) diff --git a/arch/um/include/sysdep-x86_64/stub.h b/arch/um/include/sysdep-x86_64/stub.h index f599058..2bd6e7a 100644 --- a/arch/um/include/sysdep-x86_64/stub.h +++ b/arch/um/include/sysdep-x86_64/stub.h @@ -17,37 +17,72 @@ extern void stub_clone_handler(void); #define STUB_MMAP_NR __NR_mmap #define MMAP_OFFSET(o) (o) +#define __syscall_clobber "r11","rcx","memory" +#define __syscall "syscall" + static inline long stub_syscall2(long syscall, long arg1, long arg2) { long ret; - __asm__("movq %0, %%rsi; " : : "g" (arg2) : "%rsi"); - __asm__("movq %0, %%rdi; " : : "g" (arg1) : "%rdi"); - __asm__("movq %0, %%rax; " : : "g" (syscall) : "%rax"); - __asm__("syscall;" : : : "%rax", "%r11", "%rcx"); - __asm__ __volatile__("movq %%rax, %0; " : "=g" (ret) :); - return(ret); + __asm__ volatile (__syscall + : "=a" (ret) + : "0" (syscall), "D" (arg1), "S" (arg2) : __syscall_clobber ); + + return ret; } static inline long stub_syscall3(long syscall, long arg1, long arg2, long arg3) { - __asm__("movq %0, %%rdx; " : : "g" (arg3) : "%rdx"); - return(stub_syscall2(syscall, arg1, arg2)); + long ret; + + __asm__ volatile (__syscall + : "=a" (ret) + : "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3) + : __syscall_clobber ); + + return ret; } static inline long stub_syscall4(long syscall, long arg1, long arg2, long arg3, long arg4) { - __asm__("movq %0, %%r10; " : : "g" (arg4) : "%r10"); - return(stub_syscall3(syscall, arg1, arg2, arg3)); + long ret; + + __asm__ volatile ("movq %5,%%r10 ; " __syscall + : "=a" (ret) + : "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3), + "g" (arg4) + : __syscall_clobber, "r10" ); + + return ret; +} + +static inline long stub_syscall5(long syscall, long arg1, long arg2, long arg3, + long arg4, long arg5) +{ + long ret; + + __asm__ volatile ("movq %5,%%r10 ; movq %6,%%r8 ; " __syscall + : "=a" (ret) + : "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3), + "g" (arg4), "g" (arg5) + : __syscall_clobber, "r10", "r8" ); + + return ret; } static inline long stub_syscall6(long syscall, long arg1, long arg2, long arg3, long arg4, long arg5, long arg6) { - __asm__("movq %0, %%r9; " : : "g" (arg6) : "%r9"); - __asm__("movq %0, %%r8; " : : "g" (arg5) : "%r8"); - return(stub_syscall4(syscall, arg1, arg2, arg3, arg4)); + long ret; + + __asm__ volatile ("movq %5,%%r10 ; movq %6,%%r8 ; " + "movq %7, %%r9; " __syscall : "=a" (ret) + : "0" (syscall), "D" (arg1), "S" (arg2), "d" (arg3), + "g" (arg4), "g" (arg5), "g" (arg6) + : __syscall_clobber, "r10", "r8", "r9" ); + + return ret; } static inline void trap_myself(void) diff --git a/arch/um/include/uml_uaccess.h b/arch/um/include/uml_uaccess.h index f77eb64..c0df11d 100644 --- a/arch/um/include/uml_uaccess.h +++ b/arch/um/include/uml_uaccess.h @@ -8,10 +8,6 @@ extern int __do_copy_to_user(void *to, const void *from, int n, void **fault_addr, void **fault_catcher); -extern unsigned long __do_user_copy(void *to, const void *from, int n, - void **fault_addr, void **fault_catcher, - void (*op)(void *to, const void *from, - int n), int *faulted_out); void __do_copy(void *to, const void *from, int n); #endif diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile index 1a0001b..3de9d21 100644 --- a/arch/um/kernel/Makefile +++ b/arch/um/kernel/Makefile @@ -7,10 +7,10 @@ extra-y := vmlinux.lds clean-files := obj-y = config.o exec_kern.o exitcode.o \ - helper.o init_task.o irq.o irq_user.o ksyms.o main.o mem.o physmem.o \ + init_task.o irq.o irq_user.o ksyms.o mem.o physmem.o \ process_kern.o ptrace.o reboot.o resource.o sigio_user.o sigio_kern.o \ signal_kern.o signal_user.o smp.o syscall_kern.o sysrq.o time.o \ - time_kern.o tlb.o trap_kern.o trap_user.o uaccess_user.o um_arch.o \ + time_kern.o tlb.o trap_kern.o trap_user.o uaccess.o um_arch.o \ umid.o user_util.o obj-$(CONFIG_BLK_DEV_INITRD) += initrd.o @@ -24,8 +24,7 @@ obj-$(CONFIG_MODE_SKAS) += skas/ user-objs-$(CONFIG_TTY_LOG) += tty_log.o -USER_OBJS := $(user-objs-y) config.o helper.o main.o time.o tty_log.o umid.o \ - user_util.o +USER_OBJS := $(user-objs-y) config.o time.o tty_log.o umid.o user_util.o include arch/um/scripts/Makefile.rules diff --git a/arch/um/kernel/ksyms.c b/arch/um/kernel/ksyms.c index a97a72e..7713e7a 100644 --- a/arch/um/kernel/ksyms.c +++ b/arch/um/kernel/ksyms.c @@ -20,7 +20,6 @@ #include "user_util.h" #include "mem_user.h" #include "os.h" -#include "helper.h" EXPORT_SYMBOL(stop); EXPORT_SYMBOL(uml_physmem); diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c index 462cc9d..fa4f915 100644 --- a/arch/um/kernel/mem.c +++ b/arch/um/kernel/mem.c @@ -234,8 +234,8 @@ void paging_init(void) empty_bad_page = (unsigned long *) alloc_bootmem_low_pages(PAGE_SIZE); for(i=0;i<sizeof(zones_size)/sizeof(zones_size[0]);i++) zones_size[i] = 0; - zones_size[0] = (end_iomem >> PAGE_SHIFT) - (uml_physmem >> PAGE_SHIFT); - zones_size[2] = highmem >> PAGE_SHIFT; + zones_size[ZONE_DMA] = (end_iomem >> PAGE_SHIFT) - (uml_physmem >> PAGE_SHIFT); + zones_size[ZONE_HIGHMEM] = highmem >> PAGE_SHIFT; free_area_init(zones_size); /* diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c index ea670fc..f3b583a 100644 --- a/arch/um/kernel/physmem.c +++ b/arch/um/kernel/physmem.c @@ -246,7 +246,7 @@ int is_remapped(void *virt) /* Changed during early boot */ unsigned long high_physmem; -extern unsigned long physmem_size; +extern unsigned long long physmem_size; int init_maps(unsigned long physmem, unsigned long iomem, unsigned long highmem) { @@ -321,7 +321,7 @@ void map_memory(unsigned long virt, unsigned long phys, unsigned long len, extern int __syscall_stub_start, __binary_start; void setup_physmem(unsigned long start, unsigned long reserve_end, - unsigned long len, unsigned long highmem) + unsigned long len, unsigned long long highmem) { unsigned long reserve = reserve_end - start; int pfn = PFN_UP(__pa(reserve_end)); diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c index 71af4d5..98e0939 100644 --- a/arch/um/kernel/ptrace.c +++ b/arch/um/kernel/ptrace.c @@ -43,53 +43,10 @@ void ptrace_disable(struct task_struct *child) extern int peek_user(struct task_struct * child, long addr, long data); extern int poke_user(struct task_struct * child, long addr, long data); -long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int i, ret; - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - -#ifdef SUBACH_PTRACE_SPECIAL - SUBARCH_PTRACE_SPECIAL(child,request,addr,data); -#endif - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -282,10 +239,7 @@ long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); break; } - out_tsk: - put_task_struct(child); - out: - unlock_kernel(); + return ret; } diff --git a/arch/um/kernel/sigio_user.c b/arch/um/kernel/sigio_user.c index a527511..48b1f64 100644 --- a/arch/um/kernel/sigio_user.c +++ b/arch/um/kernel/sigio_user.c @@ -18,7 +18,6 @@ #include "kern_util.h" #include "user_util.h" #include "sigio.h" -#include "helper.h" #include "os.h" /* Changed during early boot */ @@ -225,7 +224,7 @@ static int need_poll(int n) next_poll.used = n; return(0); } - if(next_poll.poll != NULL) kfree(next_poll.poll); + kfree(next_poll.poll); next_poll.poll = um_kmalloc_atomic(n * sizeof(struct pollfd)); if(next_poll.poll == NULL){ printk("need_poll : failed to allocate new pollfds\n"); diff --git a/arch/um/kernel/skas/include/mmu-skas.h b/arch/um/kernel/skas/include/mmu-skas.h index 09536f8..44110c5 100644 --- a/arch/um/kernel/skas/include/mmu-skas.h +++ b/arch/um/kernel/skas/include/mmu-skas.h @@ -8,6 +8,7 @@ #include "linux/config.h" #include "mm_id.h" +#include "asm/ldt.h" struct mmu_context_skas { struct mm_id id; @@ -15,6 +16,7 @@ struct mmu_context_skas { #ifdef CONFIG_3_LEVEL_PGTABLES unsigned long last_pmd; #endif + uml_ldt_t ldt; }; extern void switch_mm_skas(struct mm_id * mm_idp); diff --git a/arch/um/kernel/skas/include/skas.h b/arch/um/kernel/skas/include/skas.h index 0609347..daa2f85 100644 --- a/arch/um/kernel/skas/include/skas.h +++ b/arch/um/kernel/skas/include/skas.h @@ -10,7 +10,8 @@ #include "sysdep/ptrace.h" extern int userspace_pid[]; -extern int proc_mm, ptrace_faultinfo; +extern int proc_mm, ptrace_faultinfo, ptrace_ldt; +extern int skas_needs_stub; extern void switch_threads(void *me, void *next); extern void thread_wait(void *sw, void *fb); diff --git a/arch/um/kernel/skas/mem.c b/arch/um/kernel/skas/mem.c index 147466d..88ab96c 100644 --- a/arch/um/kernel/skas/mem.c +++ b/arch/um/kernel/skas/mem.c @@ -20,7 +20,7 @@ unsigned long set_task_sizes_skas(int arg, unsigned long *host_size_out, *task_size_out = CONFIG_HOST_TASK_SIZE; #else *host_size_out = top; - if (proc_mm && ptrace_faultinfo) + if (!skas_needs_stub) *task_size_out = top; else *task_size_out = CONFIG_STUB_START & PGDIR_MASK; #endif diff --git a/arch/um/kernel/skas/mmu.c b/arch/um/kernel/skas/mmu.c index 9e5e39c..677871f 100644 --- a/arch/um/kernel/skas/mmu.c +++ b/arch/um/kernel/skas/mmu.c @@ -15,6 +15,7 @@ #include "asm/mmu.h" #include "asm/pgalloc.h" #include "asm/pgtable.h" +#include "asm/ldt.h" #include "os.h" #include "skas.h" @@ -74,13 +75,12 @@ static int init_stub_pte(struct mm_struct *mm, unsigned long proc, int init_new_context_skas(struct task_struct *task, struct mm_struct *mm) { - struct mm_struct *cur_mm = current->mm; - struct mm_id *cur_mm_id = &cur_mm->context.skas.id; - struct mm_id *mm_id = &mm->context.skas.id; + struct mmu_context_skas *from_mm = NULL; + struct mmu_context_skas *to_mm = &mm->context.skas; unsigned long stack = 0; - int from, ret = -ENOMEM; + int from_fd, ret = -ENOMEM; - if(!proc_mm || !ptrace_faultinfo){ + if(skas_needs_stub){ stack = get_zeroed_page(GFP_KERNEL); if(stack == 0) goto out; @@ -102,33 +102,43 @@ int init_new_context_skas(struct task_struct *task, struct mm_struct *mm) mm->nr_ptes--; } - mm_id->stack = stack; + + to_mm->id.stack = stack; + if(current->mm != NULL && current->mm != &init_mm) + from_mm = ¤t->mm->context.skas; if(proc_mm){ - if((cur_mm != NULL) && (cur_mm != &init_mm)) - from = cur_mm_id->u.mm_fd; - else from = -1; + if(from_mm) + from_fd = from_mm->id.u.mm_fd; + else from_fd = -1; - ret = new_mm(from, stack); + ret = new_mm(from_fd, stack); if(ret < 0){ printk("init_new_context_skas - new_mm failed, " "errno = %d\n", ret); goto out_free; } - mm_id->u.mm_fd = ret; + to_mm->id.u.mm_fd = ret; } else { - if((cur_mm != NULL) && (cur_mm != &init_mm)) - mm_id->u.pid = copy_context_skas0(stack, - cur_mm_id->u.pid); - else mm_id->u.pid = start_userspace(stack); + if(from_mm) + to_mm->id.u.pid = copy_context_skas0(stack, + from_mm->id.u.pid); + else to_mm->id.u.pid = start_userspace(stack); + } + + ret = init_new_ldt(to_mm, from_mm); + if(ret < 0){ + printk("init_new_context_skas - init_ldt" + " failed, errno = %d\n", ret); + goto out_free; } return 0; out_free: - if(mm_id->stack != 0) - free_page(mm_id->stack); + if(to_mm->id.stack != 0) + free_page(to_mm->id.stack); out: return ret; } diff --git a/arch/um/kernel/skas/process.c b/arch/um/kernel/skas/process.c index 5cd0e99..599d679 100644 --- a/arch/um/kernel/skas/process.c +++ b/arch/um/kernel/skas/process.c @@ -69,6 +69,17 @@ void wait_stub_done(int pid, int sig, char * fname) if((n < 0) || !WIFSTOPPED(status) || (WSTOPSIG(status) != SIGUSR1 && WSTOPSIG(status) != SIGTRAP)){ + unsigned long regs[FRAME_SIZE]; + if(ptrace(PTRACE_GETREGS, pid, 0, regs) < 0) + printk("Failed to get registers from stub, " + "errno = %d\n", errno); + else { + int i; + + printk("Stub registers -\n"); + for(i = 0; i < FRAME_SIZE; i++) + printk("\t%d - %lx\n", i, regs[i]); + } panic("%s : failed to wait for SIGUSR1/SIGTRAP, " "pid = %d, n = %d, errno = %d, status = 0x%x\n", fname, pid, n, errno, status); @@ -370,9 +381,9 @@ int copy_context_skas0(unsigned long new_stack, int pid) } /* - * This is used only, if proc_mm is available, while PTRACE_FAULTINFO - * isn't. Opening /proc/mm creates a new mm_context, which lacks the stub-pages - * Thus, we map them using /proc/mm-fd + * This is used only, if stub pages are needed, while proc_mm is + * availabl. Opening /proc/mm creates a new mm_context, which lacks + * the stub-pages. Thus, we map them using /proc/mm-fd */ void map_stub_pages(int fd, unsigned long code, unsigned long data, unsigned long stack) diff --git a/arch/um/kernel/skas/process_kern.c b/arch/um/kernel/skas/process_kern.c index efe92e8..9c99025 100644 --- a/arch/um/kernel/skas/process_kern.c +++ b/arch/um/kernel/skas/process_kern.c @@ -145,7 +145,7 @@ int new_mm(int from, unsigned long stack) "err = %d\n", -n); } - if(!ptrace_faultinfo) + if(skas_needs_stub) map_stub_pages(fd, CONFIG_STUB_CODE, CONFIG_STUB_DATA, stack); return(fd); diff --git a/arch/um/kernel/tt/uaccess_user.c b/arch/um/kernel/tt/uaccess_user.c index 8c220f0..6c92bbc 100644 --- a/arch/um/kernel/tt/uaccess_user.c +++ b/arch/um/kernel/tt/uaccess_user.c @@ -10,6 +10,7 @@ #include "uml_uaccess.h" #include "task.h" #include "kern_util.h" +#include "os.h" int __do_copy_from_user(void *to, const void *from, int n, void **fault_addr, void **fault_catcher) diff --git a/arch/um/kernel/uaccess.c b/arch/um/kernel/uaccess.c new file mode 100644 index 0000000..054e3de --- /dev/null +++ b/arch/um/kernel/uaccess.c @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2001 Chris Emerson (cemerson@chiark.greenend.org.uk) + * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +/* These are here rather than tt/uaccess.c because skas mode needs them in + * order to do SIGBUS recovery when a tmpfs mount runs out of room. + */ + +#include <linux/string.h> +#include "os.h" + +void __do_copy(void *to, const void *from, int n) +{ + memcpy(to, from, n); +} + + +int __do_copy_to_user(void *to, const void *from, int n, + void **fault_addr, void **fault_catcher) +{ + unsigned long fault; + int faulted; + + fault = __do_user_copy(to, from, n, fault_addr, fault_catcher, + __do_copy, &faulted); + if(!faulted) return(0); + else return(n - (fault - (unsigned long) to)); +} diff --git a/arch/um/kernel/uaccess_user.c b/arch/um/kernel/uaccess_user.c deleted file mode 100644 index d035257..0000000 --- a/arch/um/kernel/uaccess_user.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Copyright (C) 2001 Chris Emerson (cemerson@chiark.greenend.org.uk) - * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com) - * Licensed under the GPL - */ - -#include <setjmp.h> -#include <string.h> - -/* These are here rather than tt/uaccess.c because skas mode needs them in - * order to do SIGBUS recovery when a tmpfs mount runs out of room. - */ - -unsigned long __do_user_copy(void *to, const void *from, int n, - void **fault_addr, void **fault_catcher, - void (*op)(void *to, const void *from, - int n), int *faulted_out) -{ - unsigned long *faddrp = (unsigned long *) fault_addr, ret; - - sigjmp_buf jbuf; - *fault_catcher = &jbuf; - if(sigsetjmp(jbuf, 1) == 0){ - (*op)(to, from, n); - ret = 0; - *faulted_out = 0; - } - else { - ret = *faddrp; - *faulted_out = 1; - } - *fault_addr = NULL; - *fault_catcher = NULL; - return ret; -} - -void __do_copy(void *to, const void *from, int n) -{ - memcpy(to, from, n); -} - - -int __do_copy_to_user(void *to, const void *from, int n, - void **fault_addr, void **fault_catcher) -{ - unsigned long fault; - int faulted; - - fault = __do_user_copy(to, from, n, fault_addr, fault_catcher, - __do_copy, &faulted); - if(!faulted) return(0); - else return(n - (fault - (unsigned long) to)); -} - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c index 93dc782..142a949 100644 --- a/arch/um/kernel/um_arch.c +++ b/arch/um/kernel/um_arch.c @@ -137,7 +137,7 @@ static char *argv1_end = NULL; /* Set in early boot */ static int have_root __initdata = 0; -long physmem_size = 32 * 1024 * 1024; +long long physmem_size = 32 * 1024 * 1024; void set_cmdline(char *cmd) { @@ -402,7 +402,7 @@ int linux_main(int argc, char **argv) #ifndef CONFIG_HIGHMEM highmem = 0; printf("CONFIG_HIGHMEM not enabled - physical memory shrunk " - "to %ld bytes\n", physmem_size); + "to %lu bytes\n", physmem_size); #endif } @@ -414,8 +414,8 @@ int linux_main(int argc, char **argv) setup_physmem(uml_physmem, uml_reserved, physmem_size, highmem); if(init_maps(physmem_size, iomem_size, highmem)){ - printf("Failed to allocate mem_map for %ld bytes of physical " - "memory and %ld bytes of highmem\n", physmem_size, + printf("Failed to allocate mem_map for %lu bytes of physical " + "memory and %lu bytes of highmem\n", physmem_size, highmem); exit(1); } @@ -426,7 +426,7 @@ int linux_main(int argc, char **argv) end_vm = start_vm + virtmem_size; if(virtmem_size < physmem_size) - printf("Kernel virtual memory size shrunk to %ld bytes\n", + printf("Kernel virtual memory size shrunk to %lu bytes\n", virtmem_size); uml_postsetup(); diff --git a/arch/um/kernel/user_util.c b/arch/um/kernel/user_util.c index 41d17c7..4c23116 100644 --- a/arch/um/kernel/user_util.c +++ b/arch/um/kernel/user_util.c @@ -27,7 +27,6 @@ #include "user.h" #include "mem_user.h" #include "init.h" -#include "helper.h" #include "ptrace_user.h" #include "uml-config.h" diff --git a/arch/um/os-Linux/Makefile b/arch/um/os-Linux/Makefile index d15ec2a..b83ac8e 100644 --- a/arch/um/os-Linux/Makefile +++ b/arch/um/os-Linux/Makefile @@ -3,11 +3,12 @@ # Licensed under the GPL # -obj-y = aio.o elf_aux.o file.o mem.o process.o signal.o start_up.o time.o \ - tt.o tty.o user_syms.o drivers/ sys-$(SUBARCH)/ +obj-y = aio.o elf_aux.o file.o helper.o main.o mem.o process.o signal.o \ + start_up.o time.o tt.o tty.o uaccess.o user_syms.o drivers/ \ + sys-$(SUBARCH)/ -USER_OBJS := aio.o elf_aux.o file.o mem.o process.o signal.o start_up.o \ - time.o tt.o tty.o +USER_OBJS := aio.o elf_aux.o file.o helper.o main.o mem.o process.o signal.o \ + start_up.o time.o tt.o tty.o uaccess.o elf_aux.o: $(ARCH_DIR)/kernel-offsets.h CFLAGS_elf_aux.o += -I$(objtree)/arch/um diff --git a/arch/um/os-Linux/aio.c b/arch/um/os-Linux/aio.c index 41cfb09..ffa759a 100644 --- a/arch/um/os-Linux/aio.c +++ b/arch/um/os-Linux/aio.c @@ -10,7 +10,6 @@ #include <sched.h> #include <sys/syscall.h> #include "os.h" -#include "helper.h" #include "aio.h" #include "init.h" #include "user.h" diff --git a/arch/um/os-Linux/drivers/ethertap_user.c b/arch/um/os-Linux/drivers/ethertap_user.c index cd4d654..901b85e8 100644 --- a/arch/um/os-Linux/drivers/ethertap_user.c +++ b/arch/um/os-Linux/drivers/ethertap_user.c @@ -19,7 +19,6 @@ #include "user_util.h" #include "net_user.h" #include "etap.h" -#include "helper.h" #include "os.h" #define MAX_PACKET ETH_MAX_PACKET diff --git a/arch/um/os-Linux/drivers/tuntap_user.c b/arch/um/os-Linux/drivers/tuntap_user.c index 4ba9b17..5294533 100644 --- a/arch/um/os-Linux/drivers/tuntap_user.c +++ b/arch/um/os-Linux/drivers/tuntap_user.c @@ -20,7 +20,6 @@ #include "kern_util.h" #include "user_util.h" #include "user.h" -#include "helper.h" #include "os.h" #define MAX_PACKET ETH_MAX_PACKET diff --git a/arch/um/kernel/helper.c b/arch/um/os-Linux/helper.c index 33fb0bd..36cc847 100644 --- a/arch/um/kernel/helper.c +++ b/arch/um/os-Linux/helper.c @@ -1,4 +1,4 @@ -/* +/* * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) * Licensed under the GPL */ @@ -13,7 +13,6 @@ #include "user.h" #include "kern_util.h" #include "user_util.h" -#include "helper.h" #include "os.h" struct helper_data { @@ -46,7 +45,7 @@ static int helper_child(void *arg) errval = errno; printk("execvp of '%s' failed - errno = %d\n", argv[0], errno); os_write_file(data->fd, &errval, sizeof(errval)); - os_kill_process(os_getpid(), 0); + kill(os_getpid(), SIGKILL); return(0); } @@ -90,7 +89,7 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, goto out_close; } - os_close_file(fds[1]); + close(fds[1]); fds[1] = -1; /*Read the errno value from the child.*/ @@ -98,7 +97,8 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, if(n < 0){ printk("run_helper : read on pipe failed, ret = %d\n", -n); ret = n; - os_kill_process(pid, 1); + kill(pid, SIGKILL); + CATCH_EINTR(waitpid(pid, NULL, 0)); } else if(n != 0){ CATCH_EINTR(n = waitpid(pid, NULL, 0)); @@ -109,8 +109,8 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, out_close: if (fds[1] != -1) - os_close_file(fds[1]); - os_close_file(fds[0]); + close(fds[1]); + close(fds[0]); out_free: if(stack_out == NULL) free_stack(stack, 0); @@ -118,7 +118,7 @@ out_free: return(ret); } -int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, +int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, unsigned long *stack_out, int stack_order) { unsigned long stack, sp; @@ -131,7 +131,7 @@ int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, pid = clone(proc, (void *) sp, flags | SIGCHLD, arg); if(pid < 0){ err = -errno; - printk("run_helper_thread : clone failed, errno = %d\n", + printk("run_helper_thread : clone failed, errno = %d\n", errno); return err; } diff --git a/arch/um/kernel/main.c b/arch/um/os-Linux/main.c index d31027f..23da27d 100644 --- a/arch/um/kernel/main.c +++ b/arch/um/os-Linux/main.c @@ -157,25 +157,25 @@ int main(int argc, char **argv, char **envp) */ change_sig(SIGPROF, 0); - /* This signal stuff used to be in the reboot case. However, - * sometimes a SIGVTALRM can come in when we're halting (reproducably - * when writing out gcov information, presumably because that takes - * some time) and cause a segfault. - */ - - /* stop timers and set SIG*ALRM to be ignored */ - disable_timer(); - - /* disable SIGIO for the fds and set SIGIO to be ignored */ - err = deactivate_all_fds(); - if(err) - printf("deactivate_all_fds failed, errno = %d\n", -err); - - /* Let any pending signals fire now. This ensures - * that they won't be delivered after the exec, when - * they are definitely not expected. - */ - unblock_signals(); + /* This signal stuff used to be in the reboot case. However, + * sometimes a SIGVTALRM can come in when we're halting (reproducably + * when writing out gcov information, presumably because that takes + * some time) and cause a segfault. + */ + + /* stop timers and set SIG*ALRM to be ignored */ + disable_timer(); + + /* disable SIGIO for the fds and set SIGIO to be ignored */ + err = deactivate_all_fds(); + if(err) + printf("deactivate_all_fds failed, errno = %d\n", -err); + + /* Let any pending signals fire now. This ensures + * that they won't be delivered after the exec, when + * they are definitely not expected. + */ + unblock_signals(); /* Reboot */ if(ret){ @@ -257,14 +257,3 @@ void __wrap_free(void *ptr) } else __real_free(ptr); } - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c index 8e71eda..9d7d69a 100644 --- a/arch/um/os-Linux/mem.c +++ b/arch/um/os-Linux/mem.c @@ -88,7 +88,7 @@ int make_tempfile(const char *template, char **out_tempname, int do_unlink) * This proc is used in start_up.c * So it isn't 'static'. */ -int create_tmp_file(unsigned long len) +int create_tmp_file(unsigned long long len) { int fd, err; char zero; @@ -121,7 +121,7 @@ int create_tmp_file(unsigned long len) return(fd); } -static int create_anon_file(unsigned long len) +static int create_anon_file(unsigned long long len) { void *addr; int fd; @@ -144,7 +144,7 @@ static int create_anon_file(unsigned long len) extern int have_devanon; -int create_mem_file(unsigned long len) +int create_mem_file(unsigned long long len) { int err, fd; diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c index b99ab41..37517d4 100644 --- a/arch/um/os-Linux/start_up.c +++ b/arch/um/os-Linux/start_up.c @@ -135,7 +135,9 @@ static int stop_ptraced_child(int pid, void *stack, int exitcode, } int ptrace_faultinfo = 1; +int ptrace_ldt = 1; int proc_mm = 1; +int skas_needs_stub = 0; static int __init skas0_cmd_param(char *str, int* add) { @@ -294,7 +296,7 @@ static void __init check_ptrace(void) check_sysemu(); } -extern int create_tmp_file(unsigned long len); +extern int create_tmp_file(unsigned long long len); static void check_tmpexec(void) { @@ -352,14 +354,26 @@ __uml_setup("noptracefaultinfo", noptracefaultinfo_cmd_param, " it. To support PTRACE_FAULTINFO, the host needs to be patched\n" " using the current skas3 patch.\n\n"); +static int __init noptraceldt_cmd_param(char *str, int* add) +{ + ptrace_ldt = 0; + return 0; +} + +__uml_setup("noptraceldt", noptraceldt_cmd_param, +"noptraceldt\n" +" Turns off usage of PTRACE_LDT, even if host supports it.\n" +" To support PTRACE_LDT, the host needs to be patched using\n" +" the current skas3 patch.\n\n"); + #ifdef UML_CONFIG_MODE_SKAS -static inline void check_skas3_ptrace_support(void) +static inline void check_skas3_ptrace_faultinfo(void) { struct ptrace_faultinfo fi; void *stack; int pid, n; - printf("Checking for the skas3 patch in the host..."); + printf(" - PTRACE_FAULTINFO..."); pid = start_ptraced_child(&stack); n = ptrace(PTRACE_FAULTINFO, pid, 0, &fi); @@ -381,9 +395,49 @@ static inline void check_skas3_ptrace_support(void) stop_ptraced_child(pid, stack, 1, 1); } -int can_do_skas(void) +static inline void check_skas3_ptrace_ldt(void) +{ +#ifdef PTRACE_LDT + void *stack; + int pid, n; + unsigned char ldtbuf[40]; + struct ptrace_ldt ldt_op = (struct ptrace_ldt) { + .func = 2, /* read default ldt */ + .ptr = ldtbuf, + .bytecount = sizeof(ldtbuf)}; + + printf(" - PTRACE_LDT..."); + pid = start_ptraced_child(&stack); + + n = ptrace(PTRACE_LDT, pid, 0, (unsigned long) &ldt_op); + if (n < 0) { + if(errno == EIO) + printf("not found\n"); + else { + perror("not found"); + } + ptrace_ldt = 0; + } + else { + if(ptrace_ldt) + printf("found\n"); + else + printf("found, but use is disabled\n"); + } + + stop_ptraced_child(pid, stack, 1, 1); +#else + /* PTRACE_LDT might be disabled via cmdline option. + * We want to override this, else we might use the stub + * without real need + */ + ptrace_ldt = 1; +#endif +} + +static inline void check_skas3_proc_mm(void) { - printf("Checking for /proc/mm..."); + printf(" - /proc/mm..."); if (os_access("/proc/mm", OS_ACC_W_OK) < 0) { proc_mm = 0; printf("not found\n"); @@ -394,8 +448,19 @@ int can_do_skas(void) else printf("found\n"); } +} + +int can_do_skas(void) +{ + printf("Checking for the skas3 patch in the host:\n"); + + check_skas3_proc_mm(); + check_skas3_ptrace_faultinfo(); + check_skas3_ptrace_ldt(); + + if(!proc_mm || !ptrace_faultinfo || !ptrace_ldt) + skas_needs_stub = 1; - check_skas3_ptrace_support(); return 1; } #else diff --git a/arch/um/os-Linux/uaccess.c b/arch/um/os-Linux/uaccess.c new file mode 100644 index 0000000..38d7101 --- /dev/null +++ b/arch/um/os-Linux/uaccess.c @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2001 Chris Emerson (cemerson@chiark.greenend.org.uk) + * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include <setjmp.h> +#include <string.h> + +unsigned long __do_user_copy(void *to, const void *from, int n, + void **fault_addr, void **fault_catcher, + void (*op)(void *to, const void *from, + int n), int *faulted_out) +{ + unsigned long *faddrp = (unsigned long *) fault_addr, ret; + + sigjmp_buf jbuf; + *fault_catcher = &jbuf; + if(sigsetjmp(jbuf, 1) == 0){ + (*op)(to, from, n); + ret = 0; + *faulted_out = 0; + } + else { + ret = *faddrp; + *faulted_out = 1; + } + *fault_addr = NULL; + *fault_catcher = NULL; + return ret; +} + diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules index 651d9d8..b3fbf12 100644 --- a/arch/um/scripts/Makefile.rules +++ b/arch/um/scripts/Makefile.rules @@ -26,8 +26,13 @@ define unprofile $(patsubst -pg,,$(patsubst -fprofile-arcs -ftest-coverage,,$(1))) endef +# cmd_make_link checks to see if the $(foo-dir) variable starts with a /. If +# so, it's considered to be a path relative to $(srcdir) rather than +# $(srcdir)/arch/$(SUBARCH). This is because x86_64 wants to get ldt.c from +# arch/um/sys-i386 rather than arch/i386 like the other borrowed files. So, +# it sets $(ldt.c-dir) to /arch/um/sys-i386. quiet_cmd_make_link = SYMLINK $@ -cmd_make_link = ln -sf $(srctree)/arch/$(SUBARCH)/$($(notdir $@)-dir)/$(notdir $@) $@ +cmd_make_link = rm -f $@; ln -sf $(srctree)$(if $(filter-out /%,$($(notdir $@)-dir)),/arch/$(SUBARCH))/$($(notdir $@)-dir)/$(notdir $@) $@ # this needs to be before the foreach, because targets does not accept # complete paths like $(obj)/$(f). To make sure this works, use a := assignment diff --git a/arch/um/sys-i386/ldt.c b/arch/um/sys-i386/ldt.c index 36b5c2c..6360f1c 100644 --- a/arch/um/sys-i386/ldt.c +++ b/arch/um/sys-i386/ldt.c @@ -3,53 +3,26 @@ * Licensed under the GPL */ +#include "linux/stddef.h" #include "linux/config.h" #include "linux/sched.h" #include "linux/slab.h" #include "linux/types.h" +#include "linux/errno.h" #include "asm/uaccess.h" -#include "asm/ptrace.h" #include "asm/smp.h" #include "asm/ldt.h" +#include "asm/unistd.h" #include "choose-mode.h" #include "kern.h" #include "mode_kern.h" -#ifdef CONFIG_MODE_TT - extern int modify_ldt(int func, void *ptr, unsigned long bytecount); -static int do_modify_ldt_tt(int func, void *ptr, unsigned long bytecount) -{ - return modify_ldt(func, ptr, bytecount); -} - -#endif - -#ifdef CONFIG_MODE_SKAS - -#include "skas.h" -#include "skas_ptrace.h" - -static int do_modify_ldt_skas(int func, void *ptr, unsigned long bytecount) -{ - struct ptrace_ldt ldt; - u32 cpu; - int res; - - ldt = ((struct ptrace_ldt) { .func = func, - .ptr = ptr, - .bytecount = bytecount }); - - cpu = get_cpu(); - res = ptrace(PTRACE_LDT, userspace_pid[cpu], 0, (unsigned long) &ldt); - put_cpu(); - - return res; -} -#endif +#ifdef CONFIG_MODE_TT -int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount) +static long do_modify_ldt_tt(int func, void __user *ptr, + unsigned long bytecount) { struct user_desc info; int res = 0; @@ -89,8 +62,7 @@ int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount) goto out; } - res = CHOOSE_MODE_PROC(do_modify_ldt_tt, do_modify_ldt_skas, func, - p, bytecount); + res = modify_ldt(func, p, bytecount); if(res < 0) goto out; @@ -108,3 +80,467 @@ out: kfree(buf); return res; } + +#endif + +#ifdef CONFIG_MODE_SKAS + +#include "skas.h" +#include "skas_ptrace.h" +#include "asm/mmu_context.h" + +long write_ldt_entry(struct mm_id * mm_idp, int func, struct user_desc * desc, + void **addr, int done) +{ + long res; + + if(proc_mm){ + /* This is a special handling for the case, that the mm to + * modify isn't current->active_mm. + * If this is called directly by modify_ldt, + * (current->active_mm->context.skas.u == mm_idp) + * will be true. So no call to switch_mm_skas(mm_idp) is done. + * If this is called in case of init_new_ldt or PTRACE_LDT, + * mm_idp won't belong to current->active_mm, but child->mm. + * So we need to switch child's mm into our userspace, then + * later switch back. + * + * Note: I'm unshure: should interrupts be disabled here? + */ + if(!current->active_mm || current->active_mm == &init_mm || + mm_idp != ¤t->active_mm->context.skas.id) + switch_mm_skas(mm_idp); + } + + if(ptrace_ldt) { + struct ptrace_ldt ldt_op = (struct ptrace_ldt) { + .func = func, + .ptr = desc, + .bytecount = sizeof(*desc)}; + u32 cpu; + int pid; + + if(!proc_mm) + pid = mm_idp->u.pid; + else { + cpu = get_cpu(); + pid = userspace_pid[cpu]; + } + + res = ptrace(PTRACE_LDT, pid, 0, (unsigned long) &ldt_op); + if(res) + res = errno; + + if(proc_mm) + put_cpu(); + } + else { + void *stub_addr; + res = syscall_stub_data(mm_idp, (unsigned long *)desc, + (sizeof(*desc) + sizeof(long) - 1) & + ~(sizeof(long) - 1), + addr, &stub_addr); + if(!res){ + unsigned long args[] = { func, + (unsigned long)stub_addr, + sizeof(*desc), + 0, 0, 0 }; + res = run_syscall_stub(mm_idp, __NR_modify_ldt, args, + 0, addr, done); + } + } + + if(proc_mm){ + /* This is the second part of special handling, that makes + * PTRACE_LDT possible to implement. + */ + if(current->active_mm && current->active_mm != &init_mm && + mm_idp != ¤t->active_mm->context.skas.id) + switch_mm_skas(¤t->active_mm->context.skas.id); + } + + return res; +} + +static long read_ldt_from_host(void __user * ptr, unsigned long bytecount) +{ + int res, n; + struct ptrace_ldt ptrace_ldt = (struct ptrace_ldt) { + .func = 0, + .bytecount = bytecount, + .ptr = (void *)kmalloc(bytecount, GFP_KERNEL)}; + u32 cpu; + + if(ptrace_ldt.ptr == NULL) + return -ENOMEM; + + /* This is called from sys_modify_ldt only, so userspace_pid gives + * us the right number + */ + + cpu = get_cpu(); + res = ptrace(PTRACE_LDT, userspace_pid[cpu], 0, + (unsigned long) &ptrace_ldt); + put_cpu(); + if(res < 0) + goto out; + + n = copy_to_user(ptr, ptrace_ldt.ptr, res); + if(n != 0) + res = -EFAULT; + + out: + kfree(ptrace_ldt.ptr); + + return res; +} + +/* + * In skas mode, we hold our own ldt data in UML. + * Thus, the code implementing sys_modify_ldt_skas + * is very similar to (and mostly stolen from) sys_modify_ldt + * for arch/i386/kernel/ldt.c + * The routines copied and modified in part are: + * - read_ldt + * - read_default_ldt + * - write_ldt + * - sys_modify_ldt_skas + */ + +static int read_ldt(void __user * ptr, unsigned long bytecount) +{ + int i, err = 0; + unsigned long size; + uml_ldt_t * ldt = ¤t->mm->context.skas.ldt; + + if(!ldt->entry_count) + goto out; + if(bytecount > LDT_ENTRY_SIZE*LDT_ENTRIES) + bytecount = LDT_ENTRY_SIZE*LDT_ENTRIES; + err = bytecount; + + if(ptrace_ldt){ + return read_ldt_from_host(ptr, bytecount); + } + + down(&ldt->semaphore); + if(ldt->entry_count <= LDT_DIRECT_ENTRIES){ + size = LDT_ENTRY_SIZE*LDT_DIRECT_ENTRIES; + if(size > bytecount) + size = bytecount; + if(copy_to_user(ptr, ldt->entries, size)) + err = -EFAULT; + bytecount -= size; + ptr += size; + } + else { + for(i=0; i<ldt->entry_count/LDT_ENTRIES_PER_PAGE && bytecount; + i++){ + size = PAGE_SIZE; + if(size > bytecount) + size = bytecount; + if(copy_to_user(ptr, ldt->pages[i], size)){ + err = -EFAULT; + break; + } + bytecount -= size; + ptr += size; + } + } + up(&ldt->semaphore); + + if(bytecount == 0 || err == -EFAULT) + goto out; + + if(clear_user(ptr, bytecount)) + err = -EFAULT; + +out: + return err; +} + +static int read_default_ldt(void __user * ptr, unsigned long bytecount) +{ + int err; + + if(bytecount > 5*LDT_ENTRY_SIZE) + bytecount = 5*LDT_ENTRY_SIZE; + + err = bytecount; + /* UML doesn't support lcall7 and lcall27. + * So, we don't really have a default ldt, but emulate + * an empty ldt of common host default ldt size. + */ + if(clear_user(ptr, bytecount)) + err = -EFAULT; + + return err; +} + +static int write_ldt(void __user * ptr, unsigned long bytecount, int func) +{ + uml_ldt_t * ldt = ¤t->mm->context.skas.ldt; + struct mm_id * mm_idp = ¤t->mm->context.skas.id; + int i, err; + struct user_desc ldt_info; + struct ldt_entry entry0, *ldt_p; + void *addr = NULL; + + err = -EINVAL; + if(bytecount != sizeof(ldt_info)) + goto out; + err = -EFAULT; + if(copy_from_user(&ldt_info, ptr, sizeof(ldt_info))) + goto out; + + err = -EINVAL; + if(ldt_info.entry_number >= LDT_ENTRIES) + goto out; + if(ldt_info.contents == 3){ + if (func == 1) + goto out; + if (ldt_info.seg_not_present == 0) + goto out; + } + + if(!ptrace_ldt) + down(&ldt->semaphore); + + err = write_ldt_entry(mm_idp, func, &ldt_info, &addr, 1); + if(err) + goto out_unlock; + else if(ptrace_ldt) { + /* With PTRACE_LDT available, this is used as a flag only */ + ldt->entry_count = 1; + goto out; + } + + if(ldt_info.entry_number >= ldt->entry_count && + ldt_info.entry_number >= LDT_DIRECT_ENTRIES){ + for(i=ldt->entry_count/LDT_ENTRIES_PER_PAGE; + i*LDT_ENTRIES_PER_PAGE <= ldt_info.entry_number; + i++){ + if(i == 0) + memcpy(&entry0, ldt->entries, sizeof(entry0)); + ldt->pages[i] = (struct ldt_entry *) + __get_free_page(GFP_KERNEL|__GFP_ZERO); + if(!ldt->pages[i]){ + err = -ENOMEM; + /* Undo the change in host */ + memset(&ldt_info, 0, sizeof(ldt_info)); + write_ldt_entry(mm_idp, 1, &ldt_info, &addr, 1); + goto out_unlock; + } + if(i == 0) { + memcpy(ldt->pages[0], &entry0, sizeof(entry0)); + memcpy(ldt->pages[0]+1, ldt->entries+1, + sizeof(entry0)*(LDT_DIRECT_ENTRIES-1)); + } + ldt->entry_count = (i + 1) * LDT_ENTRIES_PER_PAGE; + } + } + if(ldt->entry_count <= ldt_info.entry_number) + ldt->entry_count = ldt_info.entry_number + 1; + + if(ldt->entry_count <= LDT_DIRECT_ENTRIES) + ldt_p = ldt->entries + ldt_info.entry_number; + else + ldt_p = ldt->pages[ldt_info.entry_number/LDT_ENTRIES_PER_PAGE] + + ldt_info.entry_number%LDT_ENTRIES_PER_PAGE; + + if(ldt_info.base_addr == 0 && ldt_info.limit == 0 && + (func == 1 || LDT_empty(&ldt_info))){ + ldt_p->a = 0; + ldt_p->b = 0; + } + else{ + if (func == 1) + ldt_info.useable = 0; + ldt_p->a = LDT_entry_a(&ldt_info); + ldt_p->b = LDT_entry_b(&ldt_info); + } + err = 0; + +out_unlock: + up(&ldt->semaphore); +out: + return err; +} + +static long do_modify_ldt_skas(int func, void __user *ptr, + unsigned long bytecount) +{ + int ret = -ENOSYS; + + switch (func) { + case 0: + ret = read_ldt(ptr, bytecount); + break; + case 1: + case 0x11: + ret = write_ldt(ptr, bytecount, func); + break; + case 2: + ret = read_default_ldt(ptr, bytecount); + break; + } + return ret; +} + +short dummy_list[9] = {0, -1}; +short * host_ldt_entries = NULL; + +void ldt_get_host_info(void) +{ + long ret; + struct ldt_entry * ldt; + int i, size, k, order; + + host_ldt_entries = dummy_list+1; + + for(i = LDT_PAGES_MAX-1, order=0; i; i>>=1, order++); + + ldt = (struct ldt_entry *) + __get_free_pages(GFP_KERNEL|__GFP_ZERO, order); + if(ldt == NULL) { + printk("ldt_get_host_info: couldn't allocate buffer for host ldt\n"); + return; + } + + ret = modify_ldt(0, ldt, (1<<order)*PAGE_SIZE); + if(ret < 0) { + printk("ldt_get_host_info: couldn't read host ldt\n"); + goto out_free; + } + if(ret == 0) { + /* default_ldt is active, simply write an empty entry 0 */ + host_ldt_entries = dummy_list; + goto out_free; + } + + for(i=0, size=0; i<ret/LDT_ENTRY_SIZE; i++){ + if(ldt[i].a != 0 || ldt[i].b != 0) + size++; + } + + if(size < sizeof(dummy_list)/sizeof(dummy_list[0])) { + host_ldt_entries = dummy_list; + } + else { + size = (size + 1) * sizeof(dummy_list[0]); + host_ldt_entries = (short *)kmalloc(size, GFP_KERNEL); + if(host_ldt_entries == NULL) { + printk("ldt_get_host_info: couldn't allocate host ldt list\n"); + goto out_free; + } + } + + for(i=0, k=0; i<ret/LDT_ENTRY_SIZE; i++){ + if(ldt[i].a != 0 || ldt[i].b != 0) { + host_ldt_entries[k++] = i; + } + } + host_ldt_entries[k] = -1; + +out_free: + free_pages((unsigned long)ldt, order); +} + +long init_new_ldt(struct mmu_context_skas * new_mm, + struct mmu_context_skas * from_mm) +{ + struct user_desc desc; + short * num_p; + int i; + long page, err=0; + void *addr = NULL; + + memset(&desc, 0, sizeof(desc)); + + if(!ptrace_ldt) + init_MUTEX(&new_mm->ldt.semaphore); + + if(!from_mm){ + /* + * We have to initialize a clean ldt. + */ + if(proc_mm) { + /* + * If the new mm was created using proc_mm, host's + * default-ldt currently is assigned, which normally + * contains the call-gates for lcall7 and lcall27. + * To remove these gates, we simply write an empty + * entry as number 0 to the host. + */ + err = write_ldt_entry(&new_mm->id, 1, &desc, + &addr, 1); + } + else{ + /* + * Now we try to retrieve info about the ldt, we + * inherited from the host. All ldt-entries found + * will be reset in the following loop + */ + if(host_ldt_entries == NULL) + ldt_get_host_info(); + for(num_p=host_ldt_entries; *num_p != -1; num_p++){ + desc.entry_number = *num_p; + err = write_ldt_entry(&new_mm->id, 1, &desc, + &addr, *(num_p + 1) == -1); + if(err) + break; + } + } + new_mm->ldt.entry_count = 0; + } + else if (!ptrace_ldt) { + /* Our local LDT is used to supply the data for + * modify_ldt(READLDT), if PTRACE_LDT isn't available, + * i.e., we have to use the stub for modify_ldt, which + * can't handle the big read buffer of up to 64kB. + */ + down(&from_mm->ldt.semaphore); + if(from_mm->ldt.entry_count <= LDT_DIRECT_ENTRIES){ + memcpy(new_mm->ldt.entries, from_mm->ldt.entries, + sizeof(new_mm->ldt.entries)); + } + else{ + i = from_mm->ldt.entry_count / LDT_ENTRIES_PER_PAGE; + while(i-->0){ + page = __get_free_page(GFP_KERNEL|__GFP_ZERO); + if (!page){ + err = -ENOMEM; + break; + } + new_mm->ldt.pages[i] = (struct ldt_entry*)page; + memcpy(new_mm->ldt.pages[i], + from_mm->ldt.pages[i], PAGE_SIZE); + } + } + new_mm->ldt.entry_count = from_mm->ldt.entry_count; + up(&from_mm->ldt.semaphore); + } + + return err; +} + + +void free_ldt(struct mmu_context_skas * mm) +{ + int i; + + if(!ptrace_ldt && mm->ldt.entry_count > LDT_DIRECT_ENTRIES){ + i = mm->ldt.entry_count / LDT_ENTRIES_PER_PAGE; + while(i-- > 0){ + free_page((long )mm->ldt.pages[i]); + } + } + mm->ldt.entry_count = 0; +} +#endif + +int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount) +{ + return(CHOOSE_MODE_PROC(do_modify_ldt_tt, do_modify_ldt_skas, func, + ptr, bytecount)); +} diff --git a/arch/um/sys-x86_64/Makefile b/arch/um/sys-x86_64/Makefile index 06c3633..ea977df 100644 --- a/arch/um/sys-x86_64/Makefile +++ b/arch/um/sys-x86_64/Makefile @@ -5,7 +5,7 @@ # #XXX: why into lib-y? -lib-y = bitops.o bugs.o csum-partial.o delay.o fault.o mem.o memcpy.o \ +lib-y = bitops.o bugs.o csum-partial.o delay.o fault.o ldt.o mem.o memcpy.o \ ptrace.o ptrace_user.o sigcontext.o signal.o stub.o \ stub_segv.o syscalls.o syscall_table.o sysrq.o thunk.o @@ -14,7 +14,7 @@ obj-$(CONFIG_MODULES) += module.o um_module.o USER_OBJS := ptrace_user.o sigcontext.o -SYMLINKS = bitops.c csum-copy.S csum-partial.c csum-wrappers.c memcpy.S \ +SYMLINKS = bitops.c csum-copy.S csum-partial.c csum-wrappers.c ldt.c memcpy.S \ thunk.S module.c include arch/um/scripts/Makefile.rules @@ -23,6 +23,7 @@ bitops.c-dir = lib csum-copy.S-dir = lib csum-partial.c-dir = lib csum-wrappers.c-dir = lib +ldt.c-dir = /arch/um/sys-i386 memcpy.S-dir = lib thunk.S-dir = lib module.c-dir = kernel diff --git a/arch/um/sys-x86_64/syscalls.c b/arch/um/sys-x86_64/syscalls.c index 3259a4d..6acee5c 100644 --- a/arch/um/sys-x86_64/syscalls.c +++ b/arch/um/sys-x86_64/syscalls.c @@ -29,81 +29,6 @@ asmlinkage long sys_uname64(struct new_utsname __user * name) } #ifdef CONFIG_MODE_TT -extern int modify_ldt(int func, void *ptr, unsigned long bytecount); - -long sys_modify_ldt_tt(int func, void *ptr, unsigned long bytecount) -{ - /* XXX This should check VERIFY_WRITE depending on func, check this - * in i386 as well. - */ - if (!access_ok(VERIFY_READ, ptr, bytecount)) - return -EFAULT; - return(modify_ldt(func, ptr, bytecount)); -} -#endif - -#ifdef CONFIG_MODE_SKAS -extern int userspace_pid[]; - -#include "skas_ptrace.h" - -long sys_modify_ldt_skas(int func, void *ptr, unsigned long bytecount) -{ - struct ptrace_ldt ldt; - void *buf; - int res, n; - - buf = kmalloc(bytecount, GFP_KERNEL); - if(buf == NULL) - return(-ENOMEM); - - res = 0; - - switch(func){ - case 1: - case 0x11: - res = copy_from_user(buf, ptr, bytecount); - break; - } - - if(res != 0){ - res = -EFAULT; - goto out; - } - - ldt = ((struct ptrace_ldt) { .func = func, - .ptr = buf, - .bytecount = bytecount }); -#warning Need to look up userspace_pid by cpu - res = ptrace(PTRACE_LDT, userspace_pid[0], 0, (unsigned long) &ldt); - if(res < 0) - goto out; - - switch(func){ - case 0: - case 2: - n = res; - res = copy_to_user(ptr, buf, n); - if(res != 0) - res = -EFAULT; - else - res = n; - break; - } - - out: - kfree(buf); - return(res); -} -#endif - -long sys_modify_ldt(int func, void *ptr, unsigned long bytecount) -{ - return(CHOOSE_MODE_PROC(sys_modify_ldt_tt, sys_modify_ldt_skas, func, - ptr, bytecount)); -} - -#ifdef CONFIG_MODE_TT extern long arch_prctl(int code, unsigned long addr); static long arch_prctl_tt(int code, unsigned long addr) diff --git a/arch/v850/kernel/process.c b/arch/v850/kernel/process.c index 9c708c3..39cf247 100644 --- a/arch/v850/kernel/process.c +++ b/arch/v850/kernel/process.c @@ -36,11 +36,8 @@ extern void ret_from_fork (void); /* The idle loop. */ void default_idle (void) { - while (1) { - while (! need_resched ()) - asm ("halt; nop; nop; nop; nop; nop" ::: "cc"); - schedule (); - } + while (! need_resched ()) + asm ("halt; nop; nop; nop; nop; nop" ::: "cc"); } void (*idle)(void) = default_idle; @@ -54,7 +51,14 @@ void (*idle)(void) = default_idle; void cpu_idle (void) { /* endless idle loop with no priority at all */ - (*idle) (); + while (1) { + while (!need_resched()) + (*idle) (); + + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + } } /* diff --git a/arch/v850/kernel/ptrace.c b/arch/v850/kernel/ptrace.c index d6077ff..18492d0 100644 --- a/arch/v850/kernel/ptrace.c +++ b/arch/v850/kernel/ptrace.c @@ -113,45 +113,10 @@ static int set_single_step (struct task_struct *t, int val) return 1; } -long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int rval; - lock_kernel(); - - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) { - rval = -EPERM; - goto out; - } - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - rval = 0; - goto out; - } - rval = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - rval = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - rval = ptrace_attach(child); - goto out_tsk; - } - rval = ptrace_check_attach(child, request == PTRACE_KILL); - if (rval < 0) - goto out_tsk; - switch (request) { unsigned long val, copied; @@ -248,11 +213,7 @@ long sys_ptrace(long request, long pid, long addr, long data) rval = -EIO; goto out; } - -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + out: return rval; } diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 21afa69..4cce2f6 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -532,8 +532,21 @@ source "drivers/firmware/Kconfig" source fs/Kconfig +menu "Instrumentation Support" + depends on EXPERIMENTAL + source "arch/x86_64/oprofile/Kconfig" +config KPROBES + bool "Kprobes (EXPERIMENTAL)" + help + Kprobes allows you to trap at almost any kernel address and + execute a callback function. register_kprobe() establishes + a probepoint and specifies the callback. Kprobes is useful + for kernel debugging, non-intrusive instrumentation and testing. + If in doubt, say "N". +endmenu + source "arch/x86_64/Kconfig.debug" source "security/Kconfig" diff --git a/arch/x86_64/Kconfig.debug b/arch/x86_64/Kconfig.debug index 9cf1410..d584ecc 100644 --- a/arch/x86_64/Kconfig.debug +++ b/arch/x86_64/Kconfig.debug @@ -33,16 +33,6 @@ config IOMMU_DEBUG options. See Documentation/x86_64/boot-options.txt for more details. -config KPROBES - bool "Kprobes" - depends on DEBUG_KERNEL - help - Kprobes allows you to trap at almost any kernel address and - execute a callback function. register_kprobe() establishes - a probepoint and specifies the callback. Kprobes is useful - for kernel debugging, non-intrusive instrumentation and testing. - If in doubt, say "N". - config IOMMU_LEAK bool "IOMMU leak tracing" depends on DEBUG_KERNEL diff --git a/arch/x86_64/ia32/ia32_ioctl.c b/arch/x86_64/ia32/ia32_ioctl.c index 4ba0e29..e335bd0 100644 --- a/arch/x86_64/ia32/ia32_ioctl.c +++ b/arch/x86_64/ia32/ia32_ioctl.c @@ -64,12 +64,6 @@ struct ioctl_trans ioctl_start[] = { #include <linux/compat_ioctl.h> #define DECLARES #include "compat_ioctl.c" -COMPATIBLE_IOCTL(HDIO_SET_KEEPSETTINGS) -COMPATIBLE_IOCTL(HDIO_SCAN_HWIF) -COMPATIBLE_IOCTL(BLKRASET) -COMPATIBLE_IOCTL(0x4B50) /* KDGHWCLK - not in the kernel, but don't complain */ -COMPATIBLE_IOCTL(0x4B51) /* KDSHWCLK - not in the kernel, but don't complain */ -COMPATIBLE_IOCTL(FIOQSIZE) /* And these ioctls need translation */ /* realtime device */ diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile index bcdd0a8..14328ca 100644 --- a/arch/x86_64/kernel/Makefile +++ b/arch/x86_64/kernel/Makefile @@ -27,7 +27,6 @@ obj-$(CONFIG_CPU_FREQ) += cpufreq/ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_GART_IOMMU) += pci-gart.o aperture.o obj-$(CONFIG_DUMMY_IOMMU) += pci-nommu.o pci-dma.o -obj-$(CONFIG_SWIOTLB) += swiotlb.o obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_X86_PM_TIMER) += pmtimer.o @@ -41,7 +40,6 @@ CFLAGS_vsyscall.o := $(PROFILING) -g0 bootflag-y += ../../i386/kernel/bootflag.o cpuid-$(subst m,y,$(CONFIG_X86_CPUID)) += ../../i386/kernel/cpuid.o topology-y += ../../i386/mach-default/topology.o -swiotlb-$(CONFIG_SWIOTLB) += ../../ia64/lib/swiotlb.o microcode-$(subst m,y,$(CONFIG_MICROCODE)) += ../../i386/kernel/microcode.o intel_cacheinfo-y += ../../i386/kernel/cpu/intel_cacheinfo.o quirks-y += ../../i386/kernel/quirks.o diff --git a/arch/x86_64/kernel/kprobes.c b/arch/x86_64/kernel/kprobes.c index 76a28b0..dddeb67 100644 --- a/arch/x86_64/kernel/kprobes.c +++ b/arch/x86_64/kernel/kprobes.c @@ -34,7 +34,6 @@ #include <linux/config.h> #include <linux/kprobes.h> #include <linux/ptrace.h> -#include <linux/spinlock.h> #include <linux/string.h> #include <linux/slab.h> #include <linux/preempt.h> @@ -44,17 +43,10 @@ #include <asm/kdebug.h> static DECLARE_MUTEX(kprobe_mutex); - -static struct kprobe *current_kprobe; -static unsigned long kprobe_status, kprobe_old_rflags, kprobe_saved_rflags; -static struct kprobe *kprobe_prev; -static unsigned long kprobe_status_prev, kprobe_old_rflags_prev, kprobe_saved_rflags_prev; -static struct pt_regs jprobe_saved_regs; -static long *jprobe_saved_rsp; void jprobe_return_end(void); -/* copy of the kernel stack at the probe fire time */ -static kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE]; +DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); /* * returns non-zero if opcode modifies the interrupt flag. @@ -236,29 +228,30 @@ void __kprobes arch_remove_kprobe(struct kprobe *p) up(&kprobe_mutex); } -static inline void save_previous_kprobe(void) +static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) { - kprobe_prev = current_kprobe; - kprobe_status_prev = kprobe_status; - kprobe_old_rflags_prev = kprobe_old_rflags; - kprobe_saved_rflags_prev = kprobe_saved_rflags; + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; + kcb->prev_kprobe.old_rflags = kcb->kprobe_old_rflags; + kcb->prev_kprobe.saved_rflags = kcb->kprobe_saved_rflags; } -static inline void restore_previous_kprobe(void) +static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) { - current_kprobe = kprobe_prev; - kprobe_status = kprobe_status_prev; - kprobe_old_rflags = kprobe_old_rflags_prev; - kprobe_saved_rflags = kprobe_saved_rflags_prev; + __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + kcb->kprobe_status = kcb->prev_kprobe.status; + kcb->kprobe_old_rflags = kcb->prev_kprobe.old_rflags; + kcb->kprobe_saved_rflags = kcb->prev_kprobe.saved_rflags; } -static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs) +static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) { - current_kprobe = p; - kprobe_saved_rflags = kprobe_old_rflags + __get_cpu_var(current_kprobe) = p; + kcb->kprobe_saved_rflags = kcb->kprobe_old_rflags = (regs->eflags & (TF_MASK | IF_MASK)); if (is_IF_modifier(p->ainsn.insn)) - kprobe_saved_rflags &= ~IF_MASK; + kcb->kprobe_saved_rflags &= ~IF_MASK; } static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs) @@ -272,6 +265,7 @@ static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs) regs->rip = (unsigned long)p->ainsn.insn; } +/* Called with kretprobe_lock held */ void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) { @@ -292,32 +286,30 @@ void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, } } -/* - * Interrupts are disabled on entry as trap3 is an interrupt gate and they - * remain disabled thorough out this function. - */ int __kprobes kprobe_handler(struct pt_regs *regs) { struct kprobe *p; int ret = 0; kprobe_opcode_t *addr = (kprobe_opcode_t *)(regs->rip - sizeof(kprobe_opcode_t)); + struct kprobe_ctlblk *kcb; - /* We're in an interrupt, but this is clear and BUG()-safe. */ + /* + * We don't want to be preempted for the entire + * duration of kprobe processing + */ preempt_disable(); + kcb = get_kprobe_ctlblk(); /* Check we're not actually recursing */ if (kprobe_running()) { - /* We *are* holding lock here, so this is safe. - Disarm the probe we just hit, and ignore it. */ p = get_kprobe(addr); if (p) { - if (kprobe_status == KPROBE_HIT_SS && + if (kcb->kprobe_status == KPROBE_HIT_SS && *p->ainsn.insn == BREAKPOINT_INSTRUCTION) { regs->eflags &= ~TF_MASK; - regs->eflags |= kprobe_saved_rflags; - unlock_kprobes(); + regs->eflags |= kcb->kprobe_saved_rflags; goto no_kprobe; - } else if (kprobe_status == KPROBE_HIT_SSDONE) { + } else if (kcb->kprobe_status == KPROBE_HIT_SSDONE) { /* TODO: Provide re-entrancy from * post_kprobes_handler() and avoid exception * stack corruption while single-stepping on @@ -325,6 +317,7 @@ int __kprobes kprobe_handler(struct pt_regs *regs) */ arch_disarm_kprobe(p); regs->rip = (unsigned long)p->addr; + reset_current_kprobe(); ret = 1; } else { /* We have reentered the kprobe_handler(), since @@ -334,27 +327,24 @@ int __kprobes kprobe_handler(struct pt_regs *regs) * of the new probe without calling any user * handlers. */ - save_previous_kprobe(); - set_current_kprobe(p, regs); + save_previous_kprobe(kcb); + set_current_kprobe(p, regs, kcb); p->nmissed++; prepare_singlestep(p, regs); - kprobe_status = KPROBE_REENTER; + kcb->kprobe_status = KPROBE_REENTER; return 1; } } else { - p = current_kprobe; + p = __get_cpu_var(current_kprobe); if (p->break_handler && p->break_handler(p, regs)) { goto ss_probe; } } - /* If it's not ours, can't be delete race, (we hold lock). */ goto no_kprobe; } - lock_kprobes(); p = get_kprobe(addr); if (!p) { - unlock_kprobes(); if (*addr != BREAKPOINT_INSTRUCTION) { /* * The breakpoint instruction was removed right @@ -372,8 +362,8 @@ int __kprobes kprobe_handler(struct pt_regs *regs) goto no_kprobe; } - kprobe_status = KPROBE_HIT_ACTIVE; - set_current_kprobe(p, regs); + set_current_kprobe(p, regs, kcb); + kcb->kprobe_status = KPROBE_HIT_ACTIVE; if (p->pre_handler && p->pre_handler(p, regs)) /* handler has already set things up, so skip ss setup */ @@ -381,7 +371,7 @@ int __kprobes kprobe_handler(struct pt_regs *regs) ss_probe: prepare_singlestep(p, regs); - kprobe_status = KPROBE_HIT_SS; + kcb->kprobe_status = KPROBE_HIT_SS; return 1; no_kprobe: @@ -409,9 +399,10 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) struct kretprobe_instance *ri = NULL; struct hlist_head *head; struct hlist_node *node, *tmp; - unsigned long orig_ret_address = 0; + unsigned long flags, orig_ret_address = 0; unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline; + spin_lock_irqsave(&kretprobe_lock, flags); head = kretprobe_inst_table_head(current); /* @@ -450,13 +441,14 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address)); regs->rip = orig_ret_address; - unlock_kprobes(); + reset_current_kprobe(); + spin_unlock_irqrestore(&kretprobe_lock, flags); preempt_enable_no_resched(); /* * By returning a non-zero value, we are telling - * kprobe_handler() that we have handled unlocking - * and re-enabling preemption. + * kprobe_handler() that we don't want the post_handler + * to run (and have re-enabled preemption) */ return 1; } @@ -483,7 +475,8 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) * that is atop the stack is the address following the copied instruction. * We need to make it the address following the original instruction. */ -static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) +static void __kprobes resume_execution(struct kprobe *p, + struct pt_regs *regs, struct kprobe_ctlblk *kcb) { unsigned long *tos = (unsigned long *)regs->rsp; unsigned long next_rip = 0; @@ -498,7 +491,7 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) switch (*insn) { case 0x9c: /* pushfl */ *tos &= ~(TF_MASK | IF_MASK); - *tos |= kprobe_old_rflags; + *tos |= kcb->kprobe_old_rflags; break; case 0xc3: /* ret/lret */ case 0xcb: @@ -537,30 +530,28 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) } } -/* - * Interrupts are disabled on entry as trap1 is an interrupt gate and they - * remain disabled thoroughout this function. And we hold kprobe lock. - */ int __kprobes post_kprobe_handler(struct pt_regs *regs) { - if (!kprobe_running()) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) return 0; - if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) { - kprobe_status = KPROBE_HIT_SSDONE; - current_kprobe->post_handler(current_kprobe, regs, 0); + if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); } - resume_execution(current_kprobe, regs); - regs->eflags |= kprobe_saved_rflags; + resume_execution(cur, regs, kcb); + regs->eflags |= kcb->kprobe_saved_rflags; /* Restore the original saved kprobes variables and continue. */ - if (kprobe_status == KPROBE_REENTER) { - restore_previous_kprobe(); + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); goto out; - } else { - unlock_kprobes(); } + reset_current_kprobe(); out: preempt_enable_no_resched(); @@ -575,18 +566,19 @@ out: return 1; } -/* Interrupts disabled, kprobe_lock held. */ int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) { - if (current_kprobe->fault_handler - && current_kprobe->fault_handler(current_kprobe, regs, trapnr)) + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) return 1; - if (kprobe_status & KPROBE_HIT_SS) { - resume_execution(current_kprobe, regs); - regs->eflags |= kprobe_old_rflags; + if (kcb->kprobe_status & KPROBE_HIT_SS) { + resume_execution(cur, regs, kcb); + regs->eflags |= kcb->kprobe_old_rflags; - unlock_kprobes(); + reset_current_kprobe(); preempt_enable_no_resched(); } return 0; @@ -599,39 +591,41 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; + int ret = NOTIFY_DONE; + switch (val) { case DIE_INT3: if (kprobe_handler(args->regs)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_DEBUG: if (post_kprobe_handler(args->regs)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; break; case DIE_GPF: - if (kprobe_running() && - kprobe_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; - break; case DIE_PAGE_FAULT: + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); if (kprobe_running() && kprobe_fault_handler(args->regs, args->trapnr)) - return NOTIFY_STOP; + ret = NOTIFY_STOP; + preempt_enable(); break; default: break; } - return NOTIFY_DONE; + return ret; } int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); unsigned long addr; + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - jprobe_saved_regs = *regs; - jprobe_saved_rsp = (long *) regs->rsp; - addr = (unsigned long)jprobe_saved_rsp; + kcb->jprobe_saved_regs = *regs; + kcb->jprobe_saved_rsp = (long *) regs->rsp; + addr = (unsigned long)(kcb->jprobe_saved_rsp); /* * As Linus pointed out, gcc assumes that the callee * owns the argument space and could overwrite it, e.g. @@ -639,7 +633,8 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) * we also save and restore enough stack bytes to cover * the argument area. */ - memcpy(jprobes_stack, (kprobe_opcode_t *) addr, MIN_STACK_SIZE(addr)); + memcpy(kcb->jprobes_stack, (kprobe_opcode_t *)addr, + MIN_STACK_SIZE(addr)); regs->eflags &= ~IF_MASK; regs->rip = (unsigned long)(jp->entry); return 1; @@ -647,36 +642,40 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) void __kprobes jprobe_return(void) { - preempt_enable_no_resched(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + asm volatile (" xchg %%rbx,%%rsp \n" " int3 \n" " .globl jprobe_return_end \n" " jprobe_return_end: \n" " nop \n"::"b" - (jprobe_saved_rsp):"memory"); + (kcb->jprobe_saved_rsp):"memory"); } int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); u8 *addr = (u8 *) (regs->rip - 1); - unsigned long stack_addr = (unsigned long)jprobe_saved_rsp; + unsigned long stack_addr = (unsigned long)(kcb->jprobe_saved_rsp); struct jprobe *jp = container_of(p, struct jprobe, kp); if ((addr > (u8 *) jprobe_return) && (addr < (u8 *) jprobe_return_end)) { - if ((long *)regs->rsp != jprobe_saved_rsp) { + if ((long *)regs->rsp != kcb->jprobe_saved_rsp) { struct pt_regs *saved_regs = - container_of(jprobe_saved_rsp, struct pt_regs, rsp); + container_of(kcb->jprobe_saved_rsp, + struct pt_regs, rsp); printk("current rsp %p does not match saved rsp %p\n", - (long *)regs->rsp, jprobe_saved_rsp); + (long *)regs->rsp, kcb->jprobe_saved_rsp); printk("Saved registers for jprobe %p\n", jp); show_registers(saved_regs); printk("Current registers\n"); show_registers(regs); BUG(); } - *regs = jprobe_saved_regs; - memcpy((kprobe_opcode_t *) stack_addr, jprobes_stack, + *regs = kcb->jprobe_saved_regs; + memcpy((kprobe_opcode_t *) stack_addr, kcb->jprobes_stack, MIN_STACK_SIZE(stack_addr)); + preempt_enable_no_resched(); return 1; } return 0; diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c index b5a89c0..59be85d 100644 --- a/arch/x86_64/kernel/process.c +++ b/arch/x86_64/kernel/process.c @@ -86,12 +86,22 @@ EXPORT_SYMBOL(enable_hlt); */ void default_idle(void) { + local_irq_enable(); + if (!atomic_read(&hlt_counter)) { - local_irq_disable(); - if (!need_resched()) - safe_halt(); - else - local_irq_enable(); + clear_thread_flag(TIF_POLLING_NRFLAG); + smp_mb__after_clear_bit(); + while (!need_resched()) { + local_irq_disable(); + if (!need_resched()) + safe_halt(); + else + local_irq_enable(); + } + set_thread_flag(TIF_POLLING_NRFLAG); + } else { + while (!need_resched()) + cpu_relax(); } } @@ -102,30 +112,16 @@ void default_idle(void) */ static void poll_idle (void) { - int oldval; - local_irq_enable(); - /* - * Deal with another CPU just having chosen a thread to - * run here: - */ - oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); - - if (!oldval) { - set_thread_flag(TIF_POLLING_NRFLAG); - asm volatile( - "2:" - "testl %0,%1;" - "rep; nop;" - "je 2b;" - : : - "i" (_TIF_NEED_RESCHED), - "m" (current_thread_info()->flags)); - clear_thread_flag(TIF_POLLING_NRFLAG); - } else { - set_need_resched(); - } + asm volatile( + "2:" + "testl %0,%1;" + "rep; nop;" + "je 2b;" + : : + "i" (_TIF_NEED_RESCHED), + "m" (current_thread_info()->flags)); } void cpu_idle_wait(void) @@ -187,6 +183,8 @@ static inline void play_dead(void) */ void cpu_idle (void) { + set_thread_flag(TIF_POLLING_NRFLAG); + /* endless idle loop with no priority at all */ while (1) { while (!need_resched()) { @@ -204,7 +202,9 @@ void cpu_idle (void) idle(); } + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } @@ -219,15 +219,12 @@ static void mwait_idle(void) { local_irq_enable(); - if (!need_resched()) { - set_thread_flag(TIF_POLLING_NRFLAG); - do { - __monitor((void *)¤t_thread_info()->flags, 0, 0); - if (need_resched()) - break; - __mwait(0, 0); - } while (!need_resched()); - clear_thread_flag(TIF_POLLING_NRFLAG); + while (!need_resched()) { + __monitor((void *)¤t_thread_info()->flags, 0, 0); + smp_mb(); + if (need_resched()) + break; + __mwait(0, 0); } } diff --git a/arch/x86_64/kernel/ptrace.c b/arch/x86_64/kernel/ptrace.c index bbf64b5..a87b6ce 100644 --- a/arch/x86_64/kernel/ptrace.c +++ b/arch/x86_64/kernel/ptrace.c @@ -313,48 +313,11 @@ static unsigned long getreg(struct task_struct *child, unsigned long regno) } -asmlinkage long sys_ptrace(long request, long pid, unsigned long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; long i, ret; unsigned ui; - /* This lock_kernel fixes a subtle race with suid exec */ - lock_kernel(); - ret = -EPERM; - if (request == PTRACE_TRACEME) { - /* are we already being traced? */ - if (current->ptrace & PT_PTRACED) - goto out; - ret = security_ptrace(current->parent, current); - if (ret) - goto out; - /* set the ptrace bit in the process flags. */ - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out_tsk; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { /* when I and D space are separate, these will need to be fixed. */ case PTRACE_PEEKTEXT: /* read word at location addr. */ @@ -608,10 +571,6 @@ asmlinkage long sys_ptrace(long request, long pid, unsigned long addr, long data ret = ptrace_request(child, request, addr, data); break; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); return ret; } diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index 658a81b..c4e59bb 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -65,8 +65,6 @@ int smp_num_siblings = 1; /* Package ID of each logical CPU */ u8 phys_proc_id[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; u8 cpu_core_id[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; -EXPORT_SYMBOL(phys_proc_id); -EXPORT_SYMBOL(cpu_core_id); /* Bitmask of currently online CPUs */ cpumask_t cpu_online_map __read_mostly; @@ -474,6 +472,7 @@ void __cpuinit start_secondary(void) * things done here to the most necessary things. */ cpu_init(); + preempt_disable(); smp_callin(); /* otherwise gcc will move up the smp_processor_id before the cpu_init */ diff --git a/arch/x86_64/lib/bitops.c b/arch/x86_64/lib/bitops.c index a29fb75..95b6d96 100644 --- a/arch/x86_64/lib/bitops.c +++ b/arch/x86_64/lib/bitops.c @@ -5,19 +5,23 @@ #undef find_first_bit #undef find_next_bit -/** - * find_first_zero_bit - find the first zero bit in a memory region - * @addr: The address to start the search at - * @size: The maximum size to search - * - * Returns the bit-number of the first zero bit, not the number of the byte - * containing a bit. - */ -inline long find_first_zero_bit(const unsigned long * addr, unsigned long size) +static inline long +__find_first_zero_bit(const unsigned long * addr, unsigned long size) { long d0, d1, d2; long res; + /* + * We must test the size in words, not in bits, because + * otherwise incoming sizes in the range -63..-1 will not run + * any scasq instructions, and then the flags used by the je + * instruction will have whatever random value was in place + * before. Nobody should call us like that, but + * find_next_zero_bit() does when offset and size are at the + * same word and it fails to find a zero itself. + */ + size += 63; + size >>= 6; if (!size) return 0; asm volatile( @@ -30,12 +34,30 @@ inline long find_first_zero_bit(const unsigned long * addr, unsigned long size) " shlq $3,%%rdi\n" " addq %%rdi,%%rdx" :"=d" (res), "=&c" (d0), "=&D" (d1), "=&a" (d2) - :"0" (0ULL), "1" ((size + 63) >> 6), "2" (addr), "3" (-1ULL), - [addr] "r" (addr) : "memory"); + :"0" (0ULL), "1" (size), "2" (addr), "3" (-1ULL), + [addr] "S" (addr) : "memory"); + /* + * Any register would do for [addr] above, but GCC tends to + * prefer rbx over rsi, even though rsi is readily available + * and doesn't have to be saved. + */ return res; } /** + * find_first_zero_bit - find the first zero bit in a memory region + * @addr: The address to start the search at + * @size: The maximum size to search + * + * Returns the bit-number of the first zero bit, not the number of the byte + * containing a bit. + */ +long find_first_zero_bit(const unsigned long * addr, unsigned long size) +{ + return __find_first_zero_bit (addr, size); +} + +/** * find_next_zero_bit - find the first zero bit in a memory region * @addr: The address to base the search on * @offset: The bitnumber to start searching at @@ -43,7 +65,7 @@ inline long find_first_zero_bit(const unsigned long * addr, unsigned long size) */ long find_next_zero_bit (const unsigned long * addr, long size, long offset) { - unsigned long * p = ((unsigned long *) addr) + (offset >> 6); + const unsigned long * p = addr + (offset >> 6); unsigned long set = 0; unsigned long res, bit = offset&63; @@ -63,8 +85,8 @@ long find_next_zero_bit (const unsigned long * addr, long size, long offset) /* * No zero yet, search remaining full words for a zero */ - res = find_first_zero_bit ((const unsigned long *)p, - size - 64 * (p - (unsigned long *) addr)); + res = __find_first_zero_bit (p, size - 64 * (p - addr)); + return (offset + set + res); } @@ -74,6 +96,19 @@ __find_first_bit(const unsigned long * addr, unsigned long size) long d0, d1; long res; + /* + * We must test the size in words, not in bits, because + * otherwise incoming sizes in the range -63..-1 will not run + * any scasq instructions, and then the flags used by the jz + * instruction will have whatever random value was in place + * before. Nobody should call us like that, but + * find_next_bit() does when offset and size are at the same + * word and it fails to find a one itself. + */ + size += 63; + size >>= 6; + if (!size) + return 0; asm volatile( " repe; scasq\n" " jz 1f\n" @@ -83,8 +118,7 @@ __find_first_bit(const unsigned long * addr, unsigned long size) " shlq $3,%%rdi\n" " addq %%rdi,%%rax" :"=a" (res), "=&c" (d0), "=&D" (d1) - :"0" (0ULL), - "1" ((size + 63) >> 6), "2" (addr), + :"0" (0ULL), "1" (size), "2" (addr), [addr] "r" (addr) : "memory"); return res; } diff --git a/arch/x86_64/oprofile/Kconfig b/arch/x86_64/oprofile/Kconfig index 5ade198..d8a8408 100644 --- a/arch/x86_64/oprofile/Kconfig +++ b/arch/x86_64/oprofile/Kconfig @@ -1,7 +1,3 @@ - -menu "Profiling support" - depends on EXPERIMENTAL - config PROFILING bool "Profiling support (EXPERIMENTAL)" help @@ -19,5 +15,3 @@ config OPROFILE If unsure, say N. -endmenu - diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c index 08ef6d8..6a44b54 100644 --- a/arch/xtensa/kernel/process.c +++ b/arch/xtensa/kernel/process.c @@ -96,8 +96,9 @@ void cpu_idle(void) while (1) { while (!need_resched()) platform_idle(); - preempt_enable(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); } } diff --git a/arch/xtensa/kernel/ptrace.c b/arch/xtensa/kernel/ptrace.c index 1446074..ab5c4c6 100644 --- a/arch/xtensa/kernel/ptrace.c +++ b/arch/xtensa/kernel/ptrace.c @@ -45,58 +45,10 @@ void ptrace_disable(struct task_struct *child) /* Nothing to do.. */ } -long sys_ptrace(long request, long pid, long addr, long data) +long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - struct task_struct *child; int ret = -EPERM; - lock_kernel(); - -#if 0 - if ((int)request != 1) - printk("ptrace(r=%d,pid=%d,addr=%08lx,data=%08lx)\n", - (int) request, (int) pid, (unsigned long) addr, - (unsigned long) data); -#endif - - if (request == PTRACE_TRACEME) { - - /* Are we already being traced? */ - - if (current->ptrace & PT_PTRACED) - goto out; - - if ((ret = security_ptrace(current->parent, current))) - goto out; - - /* Set the ptrace bit in the process flags. */ - - current->ptrace |= PT_PTRACED; - ret = 0; - goto out; - } - - ret = -ESRCH; - read_lock(&tasklist_lock); - child = find_task_by_pid(pid); - if (child) - get_task_struct(child); - read_unlock(&tasklist_lock); - if (!child) - goto out; - - ret = -EPERM; - if (pid == 1) /* you may not mess with init */ - goto out; - - if (request == PTRACE_ATTACH) { - ret = ptrace_attach(child); - goto out_tsk; - } - - if ((ret = ptrace_check_attach(child, request == PTRACE_KILL)) < 0) - goto out_tsk; - switch (request) { case PTRACE_PEEKTEXT: /* read word at location addr. */ case PTRACE_PEEKDATA: @@ -375,10 +327,7 @@ long sys_ptrace(long request, long pid, long addr, long data) ret = ptrace_request(child, request, addr, data); goto out; } -out_tsk: - put_task_struct(child); -out: - unlock_kernel(); + out: return ret; } diff --git a/arch/xtensa/platform-iss/network.c b/arch/xtensa/platform-iss/network.c index 0682ffd..96b9bb4 100644 --- a/arch/xtensa/platform-iss/network.c +++ b/arch/xtensa/platform-iss/network.c @@ -611,38 +611,6 @@ static int iss_net_change_mtu(struct net_device *dev, int new_mtu) return -EINVAL; } -static int iss_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ -#if 0 - static const struct ethtool_drvinfo info = { - .cmd = ETHTOOL_GDRVINFO, - .driver = DRIVER_NAME, - .version = "42", - }; - void *useraddr; - u32 ethcmd; - - switch (cmd) { - case SIOCETHTOOL: - useraddr = ifr->ifr_data; - if (copy_from_user(ðcmd, useraddr, sizeof(ethcmd))) - return -EFAULT; - - switch (ethcmd) { - case ETHTOOL_GDRVINFO: - if (copy_to_user(useraddr, &info, sizeof(info))) - return -EFAULT; - return 0; - default: - return -EOPNOTSUPP; - } - default: - return -EINVAL; - } -#endif - return -EINVAL; -} - void iss_net_user_timer_expire(unsigned long _conn) { } @@ -730,7 +698,6 @@ static int iss_net_configure(int index, char *init) dev->tx_timeout = iss_net_tx_timeout; dev->set_mac_address = iss_net_set_mac; dev->change_mtu = iss_net_change_mtu; - dev->do_ioctl = iss_net_ioctl; dev->watchdog_timeo = (HZ >> 1); dev->irq = -1; |
